Powered by Deep Web Technologies
Note: This page contains sample records for the topic "goldberg machine contest" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

2013 Rube Goldberg Machine Contest | Argonne National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Rube Goldberg Machine Contest Rube Goldberg Machine Contest Rube Goldberg 2013 1 of 26 Rube Goldberg 2013 Maine South High School Team #2 Rube Goldberg 2013 1 of 26 Rube Goldberg 2013 Maine South High School Team #2 Rube Goldberg 2013 2 of 26 Rube Goldberg 2013 Joliet Central High School Team #1 Rube Goldberg 2013 3 of 26 Rube Goldberg 2013 Hoffman Estates High School Team #1 Rube Goldberg 2013 4 of 26 Rube Goldberg 2013 Maine South High School Team #2 Rube Goldberg 2013 5 of 26 Rube Goldberg 2013 Rube Goldberg 2013 6 of 26 Rube Goldberg 2013 Hoffman Estates High School Team #1 Rube Goldberg 2013 7 of 26 Rube Goldberg 2013 Hoffman Estates High School Team #1 Rube Goldberg 2013 8 of 26 Rube Goldberg 2013 Hoffman Estates High School Team #2 Rube Goldberg 2013 9 of 26 Rube Goldberg 2013 Maine South High School Team #2

2

Hoffman Estates wins Argonne's Rube Goldberg Contest  

Energy.gov (U.S. Department of Energy (DOE))

In this year's annual Rube Goldberg Machine Contest, teams competed to build a complex machine that takes at least 20 steps to hammer a nail.

3

Hoffman Estates wins Argonne's Rube Goldberg Contest | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Hoffman Estates wins Argonne's Rube Goldberg Contest Hoffman Estates wins Argonne's Rube Goldberg Contest Hoffman Estates wins Argonne's Rube Goldberg Contest March 18, 2013 - 4:05pm Addthis Hoffman Estates High School Team #1. | Photo courtesy of Argonne National Laboratory. Hoffman Estates High School Team #1. | Photo courtesy of Argonne National Laboratory. Chicago Christian High School Team #1. | Photo courtesy of Argonne National Laboratory. Chicago Christian High School Team #1. | Photo courtesy of Argonne National Laboratory. Joliet Central High School Team #1. | Photo courtesy of Argonne National Laboratory. Joliet Central High School Team #1. | Photo courtesy of Argonne National Laboratory. Hoffman Estates High School Team #2. | Photo courtesy of Argonne National Laboratory. Hoffman Estates High School Team #2. | Photo courtesy of Argonne National

4

Safety Video Contest  

NLE Websites -- All DOE Office Websites (Extended Search)

EHS Communications committee sponsored a lab wide safety video contest that ended in May 2011. The contest was open to individuals and teams. The goal was to create a short video...

5

Offset C60 fullerene encapsulated inside Goldberg type I fullerenes  

Science Conference Proceedings (OSTI)

The use of nanotechnology in pharmaceutical is an important topic in order to transport drugs to the targeted cells. However, there are a few studies for the mechanics of encapsulated tiny drug molecules into a nano-size capsule. In this paper, we determine ... Keywords: Lennard-Jones function, drug delivery, goldberg fullerenes, mathematical model, nanotechnology

Duangkamon Baowan; Noraphon Bunkluarb

2011-07-01T23:59:59.000Z

6

TMS Video Contest  

Science Conference Proceedings (OSTI)

TMS 2011: Video Contest February 27 - March 3, 2011 • San Diego, California. Every TMS member has a story to tell. How did you get here? As a materials ...

7

DOE Solar Decathlon: 2013 Contests  

NLE Websites -- All DOE Office Websites (Extended Search)

Contests The U.S. Department of Energy Solar Decathlon 2013 consists of 10 contests worth 100 points each. Architecture Market Appeal Engineering Communications Affordability...

8

DOE Solar Decathlon: Contests  

NLE Websites -- All DOE Office Websites (Extended Search)

Solar Decathlon Contests Solar Decathlon Contests Like the Olympic decathlon, the U.S. Department of Energy Solar Decathlon consists of 10 contests. These contests are designed to gauge how well the houses perform and how livable and affordable they are. Each contest is worth a maximum of 100 points, for a competition total of 1,000 points. Teams can earn points three ways: Task completion Teams complete household tasks such as cooking, washing dishes, and doing laundry. Monitored performance Team houses perform to specified criteria, such as maintaining a comfortable (71°-76°F) indoor temperature range. Jury evaluation Jurors who are experts in their field (such as architecture, engineering, and communications) award points for features that cannot be measured (such as aesthetics and design inspiration).

9

Machining  

NLE Websites -- All DOE Office Websites (Extended Search)

laboratory equipment. Machinery includes live spindle tooling lathes, CNC lathes, CNC milling machines, wire-cut EDMs, a high-speed machining center and a CNC four-axis EDM...

10

N\\ulume LIX, No. 16 CAMBRIDGE, iMASS., FRIDAY, MARCH 31, 1939 Price Five Cents Champ Fish Gulper  

E-Print Network (OSTI)

their intention of entering "Rube" Goldberg machines in the contest to be held at the All-Tech Carnival, April 29

Bhatia, Sangeeta

11

contest | OpenEI Community  

Open Energy Info (EERE)

contest Home Graham7781's picture Submitted by Graham7781(1992) Super contributor 13 December, 2012 - 14:40 The Apps for Vehicles Challenge has begun contest data fuel efficiency...

12

Report on the tenth ICFP programming contest  

Science Conference Proceedings (OSTI)

The ICFP programming contest is a 72-hour contest, which attracts thousands of contestants from all over the world. In this report we describe what it takes to organise this contest, the main ideas behind the contest we organised, the task, how to solve ... Keywords: programming contest, reverse engineering

Eelco Dolstra; Jurriaan Hage; Bastiaan Heeren; Stefan Holdermans; Johan Jeuring; Andres Löh; Clara Löh; Arie Middelkoop; Alexey Rodriguez; John van Schie

2008-09-01T23:59:59.000Z

13

DOE Solar Decathlon: Communications Contest  

NLE Websites -- All DOE Office Websites (Extended Search)

Decathlon 2011 New Zealand team members jumping in celebration. U.S. Department of Energy Solar Decathlon Bookmark and Share - Home About Competition Rules Contests - Architecture...

14

DOE Solar Decathlon: Appliances Contest  

NLE Websites -- All DOE Office Websites (Extended Search)

Decathlon 2011 New Zealand team members jumping in celebration. U.S. Department of Energy Solar Decathlon Bookmark and Share - Home About Competition Rules Contests - Architecture...

15

DOE Solar Decathlon: Engineering Contest  

NLE Websites -- All DOE Office Websites (Extended Search)

Decathlon 2011 New Zealand team members jumping in celebration. U.S. Department of Energy Solar Decathlon Bookmark and Share - Home About Competition Rules Contests - Architecture...

16

DOE Solar Decathlon: Architecture Contest  

NLE Websites -- All DOE Office Websites (Extended Search)

Decathlon 2011 New Zealand team members jumping in celebration. U.S. Department of Energy Solar Decathlon Bookmark and Share - Home About Competition Rules Contests - Architecture...

17

Contestational design : innovation for political activism  

E-Print Network (OSTI)

This thesis presents contestational design, a unique form of design activity whose aim is promote particular agendas in contested political arenas. I propose a framework for analyzing contestational design processes, which ...

Hirsch, Edward A., 1970-

2008-01-01T23:59:59.000Z

18

DOE Solar Decathlon: 2005 Contests and Scoring  

NLE Websites -- All DOE Office Websites (Extended Search)

a computer. The Solar Decathlon contests require students to generate enough energy from the sun to power our modern lifestyle. Solar Decathlon 2005 Contests and Scoring Just like...

19

DOE Solar Decathlon: News Blog » Contests  

NLE Websites -- All DOE Office Websites (Extended Search)

'Contests' 'Contests' New Contest Data Displays Provide Insight into Competition Scoring Saturday, October 5, 2013 By Solar Decathlon New contest data displays are now available on the U.S. Department of Energy Solar Decathlon website. If you are interested in the real-time performance of each house and want to keep a close eye on the competition, check out the Contests section pages. In the Contests section, the pages for the measured contests (Comfort Zone, Hot Water, Appliances, Home Entertainment, and Energy Balance) explain the contest requirements and provide real-time graphical displays of the accumulated measurements/scores for each team. Roll your cursor over the graphics to see more detailed information about each contest. For example, in the Appliances Contest graphic, the scores for running the refrigerator,

20

DOE Solar Decathlon: Affordability Contest  

NLE Websites -- All DOE Office Websites (Extended Search)

Affordability Contest Affordability Contest (100 points) The U.S. Department of Energy Solar Decathlon 2013 Affordability Contest encouraged teams to design and build affordable houses that combine energy-efficient construction and appliances with renewable energy systems. A professional estimator determined the construction cost of each house. Teams earned 100 points for achieving a target construction cost of $250,000 or less. A sliding point scale was then applied to houses with estimated construction costs between $250,001 and $599,999. Houses with estimated costs of $600,000 or more received zero points. The final results the Affordability Contest are shown in the graphic below. Roll over the graphic with your mouse to display scores and construction costs for each team

Note: This page contains sample records for the topic "goldberg machine contest" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

DOE Solar Decathlon: Scores by Contest  

NLE Websites -- All DOE Office Websites (Extended Search)

Market Appeal Contest The current scores for the Market Appeal Contest of the U.S. Department of Energy Solar Decathlon are shown below. 1. Las Vegas 94.000 Market Appeal: 94.000...

22

DOE Solar Decathlon: Scores by Contest  

NLE Websites -- All DOE Office Websites (Extended Search)

Home Entertainment Contest The current scores for the Home Entertainment Contest of the U.S. Department of Energy Solar Decathlon are shown below. 1. Santa Clara 98.794 Home...

23

DOE Solar Decathlon: Scores by Contest  

NLE Websites -- All DOE Office Websites (Extended Search)

Appliances Contest The current scores for the Appliances Contest of the U.S. Department of Energy Solar Decathlon are shown below. 1. U of So Cal 99.665 Appliances: 99.665 points...

24

DOE Solar Decathlon: 2002 Contests and Results  

NLE Websites -- All DOE Office Websites (Extended Search)

the ten contests, including scoring, judging, measurement-based evaluation, and winners: Design & Livability Presentation & Simulation Graphics & Communication Comfort Zone...

25

The Universe Adventure - Video Contest  

NLE Websites -- All DOE Office Websites (Extended Search)

So you think you can take an ordinary science idea and turn it into an extraordinary online video? Well, here's your chance to prove it. We want California high school students to share their science know-how with the world. By joining our Student Video Contest they can show off their science savvy for a chance to win prizes! Entry deadline is June 15th, 2009, and the contest is open to California high school students only. Examples of student videos that explain physical principles can be found here. How to Enter | Entry Eligibility | The Rules | Judging Criteria | Prizes The Berkeley Center for Cosmological Physics (BCCP) is sponsoring a YouTube competition to engage high school teachers and their students in a creative learning process combining social networking, science education, and peer

26

Winners Named in APS Exhibit Contest  

NLE Websites -- All DOE Office Websites (Extended Search)

Office of Basic Energy Sciences. The contest called for student teams from high schools throughout the Midwest to design and build a prototype educational exhibit that...

27

“TMS, MSE, and Me” Video Contest  

Science Conference Proceedings (OSTI)

Mar 17, 2010 ... Fu Guo and his students are all smiles accepting their video contest prize at the TMS 2010 Annual Meeting. Pictured left to right: Mengting Han, ...

28

2013 Earth Week Photo Contest Winners  

NLE Websites -- All DOE Office Websites (Extended Search)

Week Photo Contest Winners COMMUNITY: "Crossing Bridges" by Richard Debevec, RL SUSTAINABILITY: "The Land of Plenty" by Dennis Schroeder, NREL ALTERNATIVE ENERGY: "Windstills"...

29

DOE Solar Decathlon: Comfort Zone Contest  

NLE Websites -- All DOE Office Websites (Extended Search)

Decathlon 2011 New Zealand team members jumping in celebration. U.S. Department of Energy Solar Decathlon Bookmark and Share - Home About Competition Rules Contests - Architecture...

30

DOE Solar Decathlon: Hot Water Contest  

NLE Websites -- All DOE Office Websites (Extended Search)

Decathlon 2011 New Zealand team members jumping in celebration. U.S. Department of Energy Solar Decathlon Bookmark and Share - Home About Competition Rules Contests - Architecture...

31

Czech Republic Wins Architecture Contest and Team Austria Claims...  

NLE Websites -- All DOE Office Websites (Extended Search)

Architecture Contest, and Team Austria, made up of students from the Vienna University of Technology, won the Communications Contest of the U.S. Department of Energy Solar...

32

DOE Solar Decathlon: Energy Balance Contest  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Balance Contest Energy Balance Contest (100 points) For the U.S. Department of Energy Solar Decathlon 2013, each team house was equipped with a bidirectional utility meter that enabled competition organizers to measure the net energy a house produced or consumed over the course of the competition. In the Energy Balance Contest, a team received full points for producing at least as much energy as its house needed, thus achieving a net energy consumption of zero during contest week. This was accomplished by balancing production and consumption. Reduced points were earned for a net electrical energy balance between -50 kWh and 0 kWh. Reduced points were scaled linearly. The final measurements for the Energy Balance Contest are shown in the graphic below. Roll over each graphic with your mouse for detailed

33

DOE Solar Decathlon: News Blog » Contests  

NLE Websites -- All DOE Office Websites (Extended Search)

'Contests' 'Contests' Vienna University of Technology Wins Solar Decathlon 2013! Saturday, October 12, 2013 By Solar Decathlon Team Austria from the Vienna University of Technology has won the U.S. Department of Energy Solar Decathlon 2013. Photo of the exterior of LISI. Team Austria's LISI house is the winner of the U.S. Department of Energy Solar Decathlon 2013. (Credit: Jason Flakes/U.S. Department of Energy Solar Decathlon) The first-time U.S. competitor consistently wowed juries with its LISI house, after winning first place in the Communications Contest, second place in Market Appeal, and tying for third place in Engineering. In measured contests, Team Austria received first place in both the Hot Water and Energy Balance contests. University of Las Vegas Nevada took second place in the overall

34

The Universe Adventure - Video Contest  

NLE Websites -- All DOE Office Websites (Extended Search)

Entry Form Entry Form Instructions: Please complete this online entry form, and then go to the Universe Adventure YouTube group to upload your video. Vidoes submitted without an entry form will not be eligible. For complete entry guidelines, visit the contest home page. Please enter the name, age, and grade level of each group member. First Name: Last Name: Age: Grade Level: First Name: Last Name: Age: Grade Level: First Name: Last Name: Age: Grade Level: First Name: Last Name: Age: Grade Level: First Name: Last Name: Age: Grade Level: School: City: State: Select a state CA - California We will contact your teacher via email to confirm your entry. Supervising Teacher: Teacher's Email Address: Enter the YouTube user name you will use to submit your video.

35

DOE Solar Decathlon: Home Entertainment Contest  

NLE Websites -- All DOE Office Websites (Extended Search)

Home Entertainment Contest Home Entertainment Contest (100 points) The Home Entertainment Contest in the U.S. Department of Energy Solar Decathlon 2013 gauged whether a house has what it takes to be a home. How well does it accommodate the pleasures of living, such as sharing meals with friends and family, watching movies in a home theater, and surfing the Internet? How well does it accommodate a small home office for a telecommuter? The contest included: Holding two dinner parties for neighbors, who awarded the host team points based on the quality of the meal, ambiance, and overall experience Keeping all interior and exterior house lights on during specified periods of time Operating a television and computer during specified time periods Hosting a movie night for neighbors, who rated their hosts based on the

36

DOE Solar Decathlon: 2007 Contests and Scoring  

NLE Websites -- All DOE Office Websites (Extended Search)

the well-known Olympic decathlon, the Solar Decathlon consists of 10 contests. But the Solar Decathlon centers on all of the ways in which we use energy in our daily lives-at...

37

DOE Solar Decathlon: Market Appeal Contest  

NLE Websites -- All DOE Office Websites (Extended Search)

Market Appeal Contest (100 points) Each U.S. Department of Energy Solar Decathlon 2013 team will build its house for a target client of its choosing. The Market Appeal Jury,...

38

Brookhaven Essay Contest – Science and Society  

Energy.gov (U.S. Department of Energy (DOE))

The Science and Society Essay Contest aims to challenge high school students to question and deliberate the purposes and social implications of scientific research. All high school students (9th...

39

NETL 2011 Earth Day Poster Contest Winners  

NLE Websites -- All DOE Office Websites (Extended Search)

Earth Day Poster Contest Winners Earth Day Poster Contest Winners 2011 Earth Day Poster Winners Announced We are proud to announce the winners of the 2011 NETL Earth Day Poster contest. Students from schools across the country participated this year and we have chosen the top three entries in each grade (K-5). NETL Earth Day medals will be presented to all winners and certificates will be given to all participants. Photos of the winning entries are displayed below by grade. * Click on picture to bring up a larger PDF version * 2012, 2011, 2010, 2009, 2008, 2007, 2006 Kindergarten Winners First Grade Winners Second Grade Winners Kindergarten First Grade Second Grade Third Grade Winners Fourth Grade Winners Fifth Grade Winners Third Grade Fourth Grade Fifth Grade Winners By Grade

40

DOE Solar Decathlon: 2009 Contests and Scoring  

NLE Websites -- All DOE Office Websites (Extended Search)

women switching out team name plates on a large sign labeled "Leaderboard." women switching out team name plates on a large sign labeled "Leaderboard." Solar Decathlon organizers update the solar village leaderboard with the latest standings. Solar Decathlon 2009 Contests and Scoring Just like the well-known Olympic decathlon, the Solar Decathlon consists of 10 contests that center on all of the ways in which we use energy in our daily lives. Here you'll find information about the 10 contests and how they were scored. To compete, the teams must design and build energy-efficient homes that are powered exclusively by the sun. The houses are required to: Be attractive and easy to live in Maintain comfortable and healthy indoor environmental conditions Feature appealing and adequate lighting Supply energy to household appliances for cooking and cleaning

Note: This page contains sample records for the topic "goldberg machine contest" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

SHREC 2009 - Shape Retrieval Contest on a New Generic ...  

Science Conference Proceedings (OSTI)

... SHREC 2009 - Shape Retrieval Contest on a New Generic Shape Benchmark. Call for Participation: SHREC 2009 - Shape ...

42

Online idea contests: identifying factors for user retention  

Science Conference Proceedings (OSTI)

Current literature about idea contests has emphasized individuals' motives for joining volunteer idea contests. However, explanation of why people stay or leave in the long run is rare. We identify factors that motivate users to participate repeatedly ... Keywords: motivation, multiple idea contests, open innovation, user retention

Stefan Richter, Stefan Perkmann Berger, Giordano Koch, Johann Füller

2013-07-01T23:59:59.000Z

43

2004 Solutions Fermat Contest (Grade 11)  

E-Print Network (OSTI)

- - = - - = - - = - - = . Answer: (E) 8. From the graph, Jane arrives with 10 L of gas in her gas tank, and leaves with 50 L of gas 2004 Fermat Contest Solutions 1. Calculating, 10 10 11 10 10 110 100 12 ( )- = - = Answer: (D) 2. 4 4 4, having paid $36.60. So she buys 40 L of gas for $36.60, so the cost per litre is $ . $ . 36 60 40 0 915

Le Roy, Robert J.

44

DOE Solar Decathlon: Scores by Contest  

NLE Websites -- All DOE Office Websites (Extended Search)

Comfort Zone Contest Comfort Zone Contest The current scores for the Comfort Zone Contest of the U.S. Department of Energy Solar Decathlon are shown below. 1. Santa Clara 99.485 Comfort Zone: 99.485 points (ranked 1) 2. Team Capitol DC 98.822 Comfort Zone: 98.822 points (ranked 2) 3. Czech Republic 98.691 Comfort Zone: 98.691 points (ranked 3) 4. Las Vegas 98.059 Comfort Zone: 98.059 points (ranked 4) 5. Team Alberta 97.780 Comfort Zone: 97.780 points (ranked 5) 6. Team Ontario 97.642 Comfort Zone: 97.642 points (ranked 6) 7. Middlebury College 97.218 Comfort Zone: 97.218 points (ranked 7) 8. Kentucky/Indiana 96.425 Comfort Zone: 96.425 points (ranked 8) 9. North Carolina 95.396 Comfort Zone: 95.396 points (ranked 9) 10. Stanford 94.133 Comfort Zone: 94.133 points (ranked 10)

45

DOE Solar Decathlon: Scores by Contest  

NLE Websites -- All DOE Office Websites (Extended Search)

Hot Water Contest Hot Water Contest The current scores for the Hot Water Contest of the U.S. Department of Energy Solar Decathlon are shown below. T1. Stevens 100.000 Hot Water: 100.000 points (ranked T1) T1. Team Austria 100.000 Hot Water: 100.000 points (ranked T1) T1. Middlebury College 100.000 Hot Water: 100.000 points (ranked T1) T1. Las Vegas 100.000 Hot Water: 100.000 points (ranked T1) T1. Team Alberta 100.000 Hot Water: 100.000 points (ranked T1) T1. Team Ontario 100.000 Hot Water: 100.000 points (ranked T1) T2. Stanford 99.063 Hot Water: 99.063 points (ranked T2) T2. Santa Clara 99.063 Hot Water: 99.063 points (ranked T2) 3. Czech Republic 98.938 Hot Water: 98.938 points (ranked 3) T4. Norwich 93.750 Hot Water: 93.750 points (ranked T4)

46

DOE Solar Decathlon: Scores by Contest  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Balance Contest Energy Balance Contest The current scores for the Energy Balance Contest of the U.S. Department of Energy Solar Decathlon are shown below. T1. SCI-Arc/Caltech 100.000 Energy Balance: 100.000 points (ranked T1) T1. Stevens 100.000 Energy Balance: 100.000 points (ranked T1) T1. Czech Republic 100.000 Energy Balance: 100.000 points (ranked T1) T1. Stanford 100.000 Energy Balance: 100.000 points (ranked T1) T1. Norwich 100.000 Energy Balance: 100.000 points (ranked T1) T1. Team Texas 100.000 Energy Balance: 100.000 points (ranked T1) T1. Missouri S&T 100.000 Energy Balance: 100.000 points (ranked T1) T1. Team Austria 100.000 Energy Balance: 100.000 points (ranked T1) T1. Middlebury College 100.000 Energy Balance: 100.000 points (ranked T1)

47

Contested Space, Conflicting Desires: "Becoming" "Girls" in Urbanizing Rural China.  

E-Print Network (OSTI)

??Drawing from the poststructuralist perspective of subjectivity and discourse, this ethnographic project traces the construction of “girlhood” within various contested discourses in a changing Chinese… (more)

Cai, Yihuai

2010-01-01T23:59:59.000Z

48

Competitions: Student STEM Contests and Events | Department of...  

NLE Websites -- All DOE Office Websites (Extended Search)

and Events Competitions: Student STEM Contests and Events The U.S. Department of Energy Solar Decathlon challenges collegiate teams to design, build, and operate solar-powered...

49

2014 Hydrogen Student Design Contest to Design Drop-In ...  

Registration for the contest, supported by the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy, is open until January 15, ...

50

DOE Solar Decathlon: 2005 Contests and Scoring - Architecture  

NLE Websites -- All DOE Office Websites (Extended Search)

there is much more to the Architecture contest than just aesthetics. Even in buildings as small as the Solar Decathlon houses, the architecture must do everything that bigger...

51

A Probabilistic Forecast Contest and the Difficulty in Assessing Short-Range Forecast Uncertainty  

Science Conference Proceedings (OSTI)

Results are presented from a probability-based weather forecast contest. Rather than evaluating the absolute errors of nonprobabilistic temperature and precipitation forecasts, as is common in other contests, this contest evaluated the skill of ...

Thomas M. Hamill; Daniel S. Wilks

1995-09-01T23:59:59.000Z

52

NETL 2012 Earth Day Poster Contest Winners  

NLE Websites -- All DOE Office Websites (Extended Search)

2 Earth Day Poster Winners Announced 2 Earth Day Poster Winners Announced We are proud to announce the winners of the 2012 NETL Earth Day Poster contest. Students from schools across the country participated this year and we have chosen the top three entries in each grade (K-5). NETL Earth Day medals will be presented to all winners and certificates will be given to all participants. Photos of the winning entries are displayed below by grade. * Click on picture to bring up a larger PDF version * 2013, 2012, 2011, 2010, 2009, 2008, 2007, 2006 Kindergarten Winners First Grade Winners Second Grade Winners Kindergarten First Grade Second Grade Third Grade Winners Fourth Grade Winners Fifth Grade Winners Third Grade Fourth Grade Fifth Grade Winners By Grade Kindergarten 1st Place - Wyatt N. - Franklin Elementary - Vanderbilt, PA

53

NETL 2012 Earth Day Poster Contest Winners  

NLE Websites -- All DOE Office Websites (Extended Search)

3 Earth Day Poster Winners Announced 3 Earth Day Poster Winners Announced We are proud to announce the winners of the 2013 NETL Earth Day Poster contest. Students from schools across the country participated this year and we have chosen the top three entries in each grade (K-5). NETL Earth Day medals will be presented to all winners and certificates will be given to all participants. Photos of the winning entries are displayed below by grade. * Click on picture to bring up a larger PDF version * 2013, 2012, 2011, 2010, 2009, 2008, 2007, 2006 Kindergarten Winners First Grade Winners Second Grade Winners Kindergarten First Grade Second Grade Third Grade Winners Fourth Grade Winners Fifth Grade Winners Third Grade Fourth Grade Fifth Grade Winners By Grade Kindergarten 1st - Natalie Esposito - Suncrest Primary, Morgantown, WV

54

NETL: "Earth Day" Poster Contest  

NLE Websites -- All DOE Office Websites (Extended Search)

Contest - 2009 Winners Contest - 2009 Winners 2009 Annual Earth Day Poster Winners Announced As the 39th annual Earth Day rolled around on April 22, all over the country millions of Americans in thousands of local communities celebrated the day. NETL participated by holding its annual Earth Day poster contest and by placing on display at NETL the entries submitted by school children. Students in grades Kindergarten through 5th grade participated in the contest. NETL chose a gold, silver and bronze winner from each grade level, judging on the basis of the number of entries received, originality, imagination, and innovative ideas. In some cases, the judging was close, so an honorable mention winner(s) was also given. Students participated from various states (i.e., Arizona, Maryland, Massachusetts, Oregon, Texas, Virginia, and West Virginia) and the Phillipines with over 800 posters being submitted. Photos of the winning entries are displayed below.

55

Energy Department Launches Second Contest of the American Energy Data  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Department Launches Second Contest of the American Energy Energy Department Launches Second Contest of the American Energy Data Challenge Energy Department Launches Second Contest of the American Energy Data Challenge January 16, 2014 - 1:13pm Addthis Applications powered by open energy data were on display at the Energy Datapalooza in June 2012. | Photo by Sarah Gerrity, Energy Department. Applications powered by open energy data were on display at the Energy Datapalooza in June 2012. | Photo by Sarah Gerrity, Energy Department. Patricia A. Hoffman Patricia A. Hoffman Assistant Secretary, Office of Electricity Delivery & Energy Reliability How can I participate? Check out a hackathon near you to meet other developers and brainstorm ideas for apps and submissions. Visit energychallenge.energy.gov to learn more about the contest and

56

Hydrogen Student Design Contest Inspires and Opens Doors | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Hydrogen Student Design Contest Inspires and Opens Doors Hydrogen Student Design Contest Inspires and Opens Doors Hydrogen Student Design Contest Inspires and Opens Doors September 28, 2011 - 3:22pm Addthis A hydrogen-powered Toyota Prius pulls up to Humboldt State University's student designed hydrogen fueling station. A hydrogen-powered Toyota Prius pulls up to Humboldt State University's student designed hydrogen fueling station. Sunita Satyapal Program Manager, Hydrogen & Fuel Cell Technology Program Since 2004, the Hydrogen Student Design Contest has challenged university students from across the globe to use their skills in design, engineering, economics, environmental science, business and marketing to devise innovative hydrogen energy applications for real-world use. "You have to innovative and you have to stretch yourself-it was a

57

NETL: "Earth Day" Poster Contest  

NLE Websites -- All DOE Office Websites (Extended Search)

Contest - 2010 Winners Contest - 2010 Winners 2010 Annual Earth Day Poster Winners Announced As the 40th annual Earth Day rolled around this year, all over the country millions of Americans in thousands of local communities celebrated the day. NETL participated by holding its annual Earth Day poster contest and by placing on display at NETL the entries submitted by school children. Students in grades Kindergarten through 6th grade participated in the contest. NETL chose a gold, silver and bronze winner from each grade level, judging on the basis of the number of entries received, originality, imagination, and innovative ideas. In some cases, the judging was close, so an honorable mention winner(s) was also given. Students participated from various states (i.e., Texas, Pennsylvania, Massachusetts, Florida, and New Jersey). Photos of the winning entries are displayed below.

58

Hydrogen Student Design Contest Inspires and Opens Doors | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Student Design Contest Inspires and Opens Doors Student Design Contest Inspires and Opens Doors Hydrogen Student Design Contest Inspires and Opens Doors September 28, 2011 - 3:22pm Addthis A hydrogen-powered Toyota Prius pulls up to Humboldt State University's student designed hydrogen fueling station. A hydrogen-powered Toyota Prius pulls up to Humboldt State University's student designed hydrogen fueling station. Sunita Satyapal Program Manager, Hydrogen & Fuel Cell Technology Program Since 2004, the Hydrogen Student Design Contest has challenged university students from across the globe to use their skills in design, engineering, economics, environmental science, business and marketing to devise innovative hydrogen energy applications for real-world use. "You have to innovative and you have to stretch yourself-it was a

59

DOE Solar Decathlon: 2005 Contests and Scoring - Hot Water  

NLE Websites -- All DOE Office Websites (Extended Search)

teams will install systems that can do even more. The Hot Water contest demonstrates that solar hot water heating systems can supply all the hot water we use daily - to bathe and...

60

Livermore retiree selected as finalist in international contest...  

National Nuclear Security Administration (NNSA)

students. And now his time has paid off. He has been selected as a finalist in the 2013 Flame Challenge, an international contest that asks scientists to communicate complex...

Note: This page contains sample records for the topic "goldberg machine contest" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

41 - 23150 of 31,917 results. 41 - 23150 of 31,917 results. Article Hoffman Estates wins Argonne's Rube Goldberg Contest In this year's annual Rube Goldberg Machine Contest, teams competed to build a complex machine that takes at least 20 steps to hammer a nail. http://energy.gov/articles/hoffman-estates-wins-argonnes-rube-goldberg-contest Download April 28, 2011 Spring Storm Situation Report The Office of Electricity Delivery and Energy Reliability issues public Situation Reports during large scale energy emergencies. http://energy.gov/oe/downloads/april-28-2011-spring-storm-situation-report Article Energy Department Highlights Nissan's Better Plants Challenge Showcase Project in Tennessee As part of the Obama Administration's commitment to lowering energy bills for U.S. businesses, the Energy Department recognized Nissan's

62

DOE Solar Decathlon: News Blog » Blog Archive » New Contest Data Displays  

NLE Websites -- All DOE Office Websites (Extended Search)

New Contest Data Displays Provide Insight into Competition Scoring New Contest Data Displays Provide Insight into Competition Scoring Saturday, October 5, 2013 By Solar Decathlon New contest data displays are now available on the U.S. Department of Energy Solar Decathlon website. If you are interested in the real-time performance of each house and want to keep a close eye on the competition, check out the Contests section pages. In the Contests section, the pages for the measured contests (Comfort Zone, Hot Water, Appliances, Home Entertainment, and Energy Balance) explain the contest requirements and provide real-time graphical displays of the accumulated measurements/scores for each team. Roll your cursor over the graphics to see more detailed information about each contest. For example, in the Appliances Contest graphic, the scores for running the refrigerator,

63

Affordability Contest Adds New Dimension to Solar Decathlon 2011 |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Affordability Contest Adds New Dimension to Solar Decathlon 2011 Affordability Contest Adds New Dimension to Solar Decathlon 2011 Affordability Contest Adds New Dimension to Solar Decathlon 2011 September 27, 2011 - 10:20am Addthis Matt Hansen reviews each team’s design drawings and construction specifications to estimate the total construction cost of its house. (Credit: Alexis Power/U.S. Department of Energy Solar Decathlon) Matt Hansen reviews each team's design drawings and construction specifications to estimate the total construction cost of its house. (Credit: Alexis Power/U.S. Department of Energy Solar Decathlon) Alexis Powers EDITOR'S NOTE: Originally posted on the Solar Decathlon News Blog on September 26, 2011. The big buzz word in Washington, D.C., these days is budget. In the solar village at West Potomac Park, cost savings are top of mind for the

64

Kill-a-Watt Contest at UCF | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Kill-a-Watt Contest at UCF Kill-a-Watt Contest at UCF Kill-a-Watt Contest at UCF April 2, 2010 - 5:16pm Addthis The University of Central Florida has created an innovative way to save energy and money on campus through a new dorm-based competition called "Kill-a-Watt". Students representing campus residence halls compete against each other to achieve energy savings and can receive up to $200 in scholarships. Watch how former DOE intern and current UCF DOE Campus Ambassador, Chris Castro, is spearheading this exciting effort and learn more about energy saving tips that students find useful like proper thermostat set points and reducing plug load. Read the DoE's press release about the video. Addthis Related Articles University of Central Florida Students' Energy Saving Work Showcased in New

65

America's Home Energy Education Challenge Poster Contest | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Home Energy Education Challenge Poster Contest Home Energy Education Challenge Poster Contest America's Home Energy Education Challenge Poster Contest Addthis Estes Park Middle School 1 of 4 Estes Park Middle School Estes Park Middle School in Estes Park, Colorado received $1,000 as the National Poster Winner for visually demonstrating simple, inexpensive ways to reduce energy usage and save money. Image: Estes Park Middle School Leon Heights Elementary School 2 of 4 Leon Heights Elementary School Leon Heights Elementary School in Belton, Texas won $500 as a Southern Regional Challenge Runner Up. Image: Leon Heights Elementary School Vineyard STEM Magnet School 3 of 4 Vineyard STEM Magnet School The Vineyard STEM Magnet School in Ontario, California won $500 for this National Poster Honorable Mention. Image: Vineyard STEM Magnet School

66

The China Prize Essay Contest and the Late Qing Promotion of Modern Science Benjamin A. Elman  

E-Print Network (OSTI)

The China Prize Essay Contest and the Late Qing Promotion of Modern Science Benjamin A. Elman of the nineteenth century was the "seeding time" for the modernization of China. During the period from 1850 to 1870-1897) devised the "China Prize Essay Contest" (Gezhi shuyuan keyi ) in 1886. The essay writing contest

Elman, Benjamin

67

Modelling discourse in contested domains: a semiotic and cognitive framework  

Science Conference Proceedings (OSTI)

This paper examines the representational requirements for interactive, collaborative systems intended to support sensemaking and argumentation over contested issues. We argue that a perspective supported by semiotic and cognitively oriented discourse ... Keywords: argumentation, coherence relations, discourse representation, ontologies, semantic annotation, semantic web, semiotics

Clara Mancini; Simon J. Buckingham Shum

2006-11-01T23:59:59.000Z

68

Dr. Robert N. Goldberg  

Science Conference Proceedings (OSTI)

... evaluation of physical and chemical property data, and biochemical thermodynamics. ... in the determination of the thermodynamic properties for ...

2012-10-01T23:59:59.000Z

69

DOE Solar Decathlon: News Blog » Blog Archive » Affordability Contest  

NLE Websites -- All DOE Office Websites (Extended Search)

Affordability Contest Adds New Dimension to Solar Decathlon 2011 Affordability Contest Adds New Dimension to Solar Decathlon 2011 Monday, September 26, 2011 Alexis Powers The big buzz word in Washington, D.C., these days is budget. In the solar village at West Potomac Park, cost savings are top of mind for the decathletes as well. This year, the Affordability Contest was added as one of the 10 contests that make up the Solar Decathlon. It replaced the Lighting Design Contest, which is now evaluated as part of other contests. Teams can earn the 100 possible points in the Affordability Contest by achieving an estimated construction cost of $250,000 or less. A sliding point scale is applied to houses that cost between $250,000 and $600,000. Houses that receive a cost estimate of more than $600,000 receive zero points. Photo of a student decathlete reviewing construction documents and online data with Matt Hansen.

70

Meso-machining  

NLE Websites -- All DOE Office Websites (Extended Search)

following meso-machin- ing technologies: * Focused ion beam (FIB) machining, * Micro-milling and -turning, * Femto-second laser machining * Micro-Electro Discharge Machining...

71

Electric machine  

SciTech Connect

An interior permanent magnet electric machine is disclosed. The interior permanent magnet electric machine comprises a rotor comprising a plurality of radially placed magnets each having a proximal end and a distal end, wherein each magnet comprises a plurality of magnetic segments and at least one magnetic segment towards the distal end comprises a high resistivity magnetic material.

El-Refaie, Ayman Mohamed Fawzi (Niskayuna, NY); Reddy, Patel Bhageerath (Madison, WI)

2012-07-17T23:59:59.000Z

72

NETL: "Earth Day" Poster Contest  

NLE Websites -- All DOE Office Websites (Extended Search)

7 Winners 7 Winners 2007 Annual Earth Day Poster Winners Announced As the 37th annual Earth Day rolled around on April 22, all over the country millions of Americans in thousands of local communities celebrated the day. NETL participated by holding its annual Earth Day poster contest and by placing on display at NETL the entries submitted by area school children. Students five to ten years old took part in the contest. NETL chose up to three winners from each grade level, judging on the basis of the number of entries received, originality, imagination, and innovative ideas. Participating schools included South Park Middle, Ben Franklin Elementary, Boyce Middle, Greenfield, Green Valley, McAnnulty and Streams Elementary, all from Pittsburgh; Valley Elementary in Arthurdale; Smithville Elementary in Smithville; Suncrest Primary in Morgantown; Pleasant Valley School in Fairmont; Hastings Elementary in Westborough; and the Boys & Girls Club Of Corvallis in Corvallis. Photos of the winning entries are displayed below.

73

Machine therapy  

E-Print Network (OSTI)

Machine Therapy is a new practice combining art, design, psychoanalysis, and engineering work in ways that access and reveal the vital, though often unnoticed, relevance of people's interactions and relationships with ...

Dobson, Kelly E. (Kelly Elizabeth), 1970-

2007-01-01T23:59:59.000Z

74

NETL: "Earth Day" Poster Contest  

NLE Websites -- All DOE Office Websites (Extended Search)

Contest Contest YOU'RE INVITED TO COME JOIN THE FUN AND HELP US CELEBRATE EARTH DAY 2009 BY SHARING YOUR IDEAS ON WHAT "EARTH DAY" MEANS TO YOU. We'd like your K thru 5th grade students to once again share their ideas on what "Earth Day" means to them by participating in the National Energy Technology Laboratory's (NETL's) poster contest for Earth Day 2009. Earth Day is a time set aside each year to create an awareness of the importance of recycling, conserving energy, improving air quality and making our environment a cleaner place to live. Earth Day challenges each and every one of us to do our part for the planet. All poster submittals will be displayed at our NETL sites (Albany, OR; Houston, TX; Pittsburgh, PA; and Morgantown, WV) from April 15, 2009 through May 8, 2009. A team of judges will review all posters and choose three winners from each grade level (K-5). Criteria for the winning poster will be based on originality, imagination, and innovative ideas. All participants will receive a certificate. Winners will receive a medal and a certificate, along with an opportunity to have their name and photograph in our NETL News publication. Winners will be notified by April 21, 2009 (Earth Week) and recognized with a certificate and medal citing their achievement. The winners, names and entries will be posted in the Educational Initiatives web area on the NETL website.

75

Team California Wins the Communications Contest at U.S. Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Team California Wins the Communications Contest at U.S. Department Team California Wins the Communications Contest at U.S. Department of Energy Solar Decathlon Team California Wins the Communications Contest at U.S. Department of Energy Solar Decathlon October 13, 2009 - 12:00am Addthis WASHINGTON, DC - Team California today snagged the top spot in the Communications contest at the U.S. Department of Energy's Solar Decathlon. Today's contest is the third out of ten contests that make up the international competition taking place on the National Mall in Washington, D.C. Team California impressed jurors with the communications strategies, promotional materials, and people skills the team displayed while conveying the technical aspects of household solar energy systems to the public. "Team California constructed an easy-to-navigate Web site with a

76

Life at the Frontiers of Energy Research Video Contest | U.S...  

Office of Science (SC) Website

Life at the Frontiers of Energy Research Video Contest Energy Frontier Research Centers (EFRCs) EFRCs Home Centers Research Science Highlights News & Events EFRC News EFRC Events...

77

Photo of the Week: More than One Way to Hammer a Nail | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

More than One Way to Hammer a Nail More than One Way to Hammer a Nail Photo of the Week: More than One Way to Hammer a Nail March 18, 2013 - 3:43pm Addthis Last week, Argonne National Laboratory hosted the 18th annual Rube Goldberg Machine Contest, which gathered nine high school teams in a competition to build a series of simples tasks, combining the principles of physics and engineering. By using common objects like marbles and bicycle parts, the students were assigned to build a machine that takes at least 20 steps to hammer a nail. In this photo, members of a Hoffman Estates High School team works on assembling a Toyland-themed Rube Goldberg machine. Check out more photos of the competition's complex and colorful Rube Goldberg machines. | Photo courtesy of Argonne National Laboratory.

78

Photo of the Week: More than One Way to Hammer a Nail | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Photo of the Week: More than One Way to Hammer a Nail Photo of the Week: More than One Way to Hammer a Nail Photo of the Week: More than One Way to Hammer a Nail March 18, 2013 - 3:43pm Addthis Last week, Argonne National Laboratory hosted the 18th annual Rube Goldberg Machine Contest, which gathered nine high school teams in a competition to build a series of simples tasks, combining the principles of physics and engineering. By using common objects like marbles and bicycle parts, the students were assigned to build a machine that takes at least 20 steps to hammer a nail. In this photo, members of a Hoffman Estates High School team works on assembling a Toyland-themed Rube Goldberg machine. Check out more photos of the competition's complex and colorful Rube Goldberg machines. | Photo courtesy of Argonne National Laboratory.

79

Continuing Customs of Negotiation and Contestation in Bhutan  

E-Print Network (OSTI)

of Negotiation and Contestation in Bhutan 2 0 7 butter containers (S19,R9), incense (S19,R18), leather bags (S1,R6), paper (S14,R8), cloth (S14,R7), wool (S20,R13), baskets and buckets (S19,R24), shingles for roofing (S22, R2) and timber (S20,R21). A number... of paddy to the monk body. 20th Session of the National Assembly, Wood Dragon Year (1964) 13. Matter Relating to Wool The people of Bumthang were required to supply wool to the store officer of Bumthang in excess of his legitimate needs. As such, the store...

Adam Pain; Pema, Deki

2000-01-01T23:59:59.000Z

80

Announcing the 2012-2013 Energy Innovation Contest for undergraduates to stamp out carbon emissions on  

E-Print Network (OSTI)

Announcing the 2012-2013 Energy Innovation Contest for undergraduates to stamp out carbon emissions on New Brunswick Campus The Rutgers Energy Institute will offer three awards: The REI gratefully acknowledges sponsorship of the Energy Contest by Sapphire Energy Inc. Awards will go to students who develop

Garfunkel, Eric

Note: This page contains sample records for the topic "goldberg machine contest" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

DOE Hydrogen and Fuel Cells Program: 2014 Hydrogen Student Design Contest  

NLE Websites -- All DOE Office Websites (Extended Search)

2014 Hydrogen Student Design Contest to Design Drop-In Hydrogen Fueling 2014 Hydrogen Student Design Contest to Design Drop-In Hydrogen Fueling Station Dec 16, 2013 The 10th annual Hydrogen Student Design Contest will challenge student teams to design a transportable, containerized hydrogen fueling station solution. Registration for the contest, supported by the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy, is open until January 15, 2014. Through the contest, multidisciplinary student teams will demonstrate their talents in engineering, public planning, architecture, marketing, and entrepreneurship. In previous years, teams have designed fueling stations, airport systems, and green buildings-all using hydrogen. The Grand Prize winning team will receive an expenses-paid trip to present their winning entry to hundreds of industry professionals in a session at

82

NETL: "Earth Day" Poster Contest  

NLE Websites -- All DOE Office Websites (Extended Search)

8 Winners 8 Winners 2008 Annual Earth Day Poster Winners Announced As the 38th annual Earth Day rolled around on April 22, all over the country millions of Americans in thousands of local communities celebrated the day. NETL participated by holding its annual Earth Day poster contest and by placing on display at NETL the entries submitted by area school children. Students in grades Kindergarten through 5th grade participated in the contest. NETL chose a gold, silver and bronze winner from each grade level, judging on the basis of the number of entries received, originality, imagination, and innovative ideas. In some cases, the judging was close, so an honorable mention winner was also given. Participating schools included South Park Middle School, Ben Franklin Elementary, Boyce Middle School, Greenfield, Green Valley, McAnnulty and Streams Elementary, all from Pittsburgh, PA; Valley Elementary in Arthurdale, WV; Smithville Elementary in Smithville, WV; Suncrest Primary in Morgantown, WV; Pleasant Valley School in Fairmont, WV; Hastings Elementary in Westborough, MA; and the Boys & Girls Club of Corvallis in Corvallis, OR. Photos of the winning entries are displayed below.

83

Induction machine  

DOE Patents (OSTI)

A polyphase rotary induction machine for use as a motor or generator utilizing a single rotor assembly having two series connected sets of rotor windings, a first stator winding disposed around the first rotor winding and means for controlling the current induced in one set of the rotor windings compared to the current induced in the other set of the rotor windings. The rotor windings may be wound rotor windings or squirrel cage windings.

Owen, Whitney H. (Ogden, UT)

1980-01-01T23:59:59.000Z

84

Accelerating Turing Machines  

Science Conference Proceedings (OSTI)

Accelerating Turing machines are Turing machines of a sort able to perform tasks that are commonly regarded as impossible for Turing machines. For example, they can determine whether or not the decimal representation of ? contains n consecutive 7s, ... Keywords: ?-machine, Chinese room argument, Church–Turing thesis, accelerating Turing machine, decision problem, effective procedure, halting problem, hypercomputation, hypercomputer, infinity machine, oracle machine, super-task

B. Jack Copeland

2002-05-01T23:59:59.000Z

85

NETL: "Earth Day" Poster Contest  

NLE Websites -- All DOE Office Websites (Extended Search)

6 Winners 6 Winners On April 22, the 36th annual Earth Day was celebrated by millions of Americans in thousands of local communities. Throughout April, NETL held its annual Earth Day Poster Contest with a display of artwork by area schoolchildren. Students ages 5–10 submitted entries, and NETL chose up to three winners from each grade level based on the number of entries received and three judging categories—originality, imagination, and innovative ideas. Participating schools included South Park Middle, Saint Simon and Jude, and Ave Maria in Pittsburgh, PA, Valley Elementary in Arthurdale, WV, and Suncrest Primary in Morgantown, WV. Photos of the winning entries are displayed below. To close the event, NETL will visit each school to present certificates to all participants and NETL Earth Day medals to the winners.

86

DOE Solar Decathlon: News Blog » Blog Archive » Energy Balance Contest  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Balance Contest Rewards Teams for Producing Only the Energy They Energy Balance Contest Rewards Teams for Producing Only the Energy They Need Friday, September 23, 2011 By Carol Anna One of the 10 contests in the U.S. Department of Energy Solar Decathlon 2011, Energy Balance measures the net energy each house produces or consumes over the course of the competition. The Energy Balance Contest simulates how most residential solar electric systems work today. Each team house is equipped with a bidirectional utility meter that enables power flow to and from the electric utility. When the sun shines, the house's solar electric system produces electricity. If the system produces more electricity than the house needs, the excess electricity flows backward through the meter to the grid. At night, when the solar electric system is not producing electricity and the

87

Make Your Mark in the 2011 Hydrogen Student Design Contest | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Make Your Mark in the 2011 Hydrogen Student Design Contest Make Your Mark in the 2011 Hydrogen Student Design Contest Make Your Mark in the 2011 Hydrogen Student Design Contest October 8, 2010 - 2:46pm Addthis Editor's Note: The Registration Deadline has been extended to November 1st. This year, the 2010-2011 Hydrogen Student Design Contest is challenging undergraduate and graduate students worldwide to plan and design a residential hydrogen fueling system for a home, apartment complex, dorm or other single residential building. As a part of their entry, teams will develop a technical design; conduct an economic analysis; and develop business, marketing and public education plans for their systems. The grand-prize-winning team will receive an expenses-paid trip to present their winning entry to thousands of industry professionals in a keynote

88

Make Your Mark in the 2011 Hydrogen Student Design Contest | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Make Your Mark in the 2011 Hydrogen Student Design Contest Make Your Mark in the 2011 Hydrogen Student Design Contest Make Your Mark in the 2011 Hydrogen Student Design Contest October 8, 2010 - 2:46pm Addthis Editor's Note: The Registration Deadline has been extended to November 1st. This year, the 2010-2011 Hydrogen Student Design Contest is challenging undergraduate and graduate students worldwide to plan and design a residential hydrogen fueling system for a home, apartment complex, dorm or other single residential building. As a part of their entry, teams will develop a technical design; conduct an economic analysis; and develop business, marketing and public education plans for their systems. The grand-prize-winning team will receive an expenses-paid trip to present their winning entry to thousands of industry professionals in a keynote

89

Life at the Frontiers of Energy Research Video Contest | U.S. DOE Office of  

Office of Science (SC) Website

Life at the Frontiers of Energy Research Life at the Frontiers of Energy Research Video Contest Energy Frontier Research Centers (EFRCs) EFRCs Home Centers Research Science Highlights News & Events EFRC News EFRC Events DOE Announcements Publications Contact BES Home 04.22.11 Life at the Frontiers of Energy Research Video Contest Print Text Size: A A A Subscribe FeedbackShare Page April 22, 2011 :: The Office of Science announced the winners of the Energy Frontier Research Centers Video Contest External link and the start of the People's Choice Contest External link . The video with the most votes by 5:00 pm on May 24, 2011 will receive the People's Choice Award. Be sure to vote for your favorites. The winning videos will be shown during an awards ceremony at the EFRC Summit External link on May 25, 2011. View the

90

Life at the Frontiers of Energy Research Video Contest | U.S...  

Office of Science (SC) Website

1 Life at the Frontiers of Energy Research Video Contest News In the News In Focus 2013 2012 2011 2010 2009 2008 2007 2006 2005 Presentations & Testimony Recovery Act Contact...

91

Machine Tool Locator  

NLE Websites -- All DOE Office Websites (Extended Search)

gathered and used to set the position of the machine tool and to measure the size and shape of the machine tool tip, and examine cutting edge wear. April 18, 2013 machine tool...

92

Socially guided machine learning  

E-Print Network (OSTI)

Social interaction will be key to enabling robots and machines in general to learn new tasks from ordinary people (not experts in robotics or machine learning). Everyday people who need to teach their machines new things ...

Thomaz, Andrea Lockerd

2006-01-01T23:59:59.000Z

93

Machines reviving humans  

NLE Websites -- All DOE Office Websites (Extended Search)

The machines you may be referring to include machines to electrically stimulate the heart into again having a normal sequence of electrical impulses necessary for sustained...

94

Networks of Adjacent Action Situations in Polycentric Governance Michael D. McGinnis  

E-Print Network (OSTI)

, a reality competition in which teams construct Rube Goldberg- style machines related to a particular theme

Indiana University

95

Winners of Hydrogen Student Design Contest Turn Urban Waste into Energy |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Winners of Hydrogen Student Design Contest Turn Urban Waste into Winners of Hydrogen Student Design Contest Turn Urban Waste into Energy Winners of Hydrogen Student Design Contest Turn Urban Waste into Energy September 20, 2012 - 1:10pm Addthis The University of Maryland team accepted the award for the best combined heat, hydrogen, and power system design at the World Hydrogen Energy Conference (WHEC) in Toronto. | Photo courtesy of Jennie Moton. The University of Maryland team accepted the award for the best combined heat, hydrogen, and power system design at the World Hydrogen Energy Conference (WHEC) in Toronto. | Photo courtesy of Jennie Moton. Rebecca Matulka Rebecca Matulka Digital Communications Specialist, Office of Public Affairs What does this project do? The Maryland team's CHHP design produces 1.2 MW of electricity and

96

Winners of Hydrogen Student Design Contest Turn Urban Waste into Energy |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Winners of Hydrogen Student Design Contest Turn Urban Waste into Winners of Hydrogen Student Design Contest Turn Urban Waste into Energy Winners of Hydrogen Student Design Contest Turn Urban Waste into Energy September 20, 2012 - 1:10pm Addthis The University of Maryland team accepted the award for the best combined heat, hydrogen, and power system design at the World Hydrogen Energy Conference (WHEC) in Toronto. | Photo courtesy of Jennie Moton. The University of Maryland team accepted the award for the best combined heat, hydrogen, and power system design at the World Hydrogen Energy Conference (WHEC) in Toronto. | Photo courtesy of Jennie Moton. Rebecca Matulka Rebecca Matulka Digital Communications Specialist, Office of Public Affairs What does this project do? The Maryland team's CHHP design produces 1.2 MW of electricity and

97

Energy Efficiency Wins Top Prize at EPA App Contest | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Efficiency Wins Top Prize at EPA App Contest Efficiency Wins Top Prize at EPA App Contest Energy Efficiency Wins Top Prize at EPA App Contest November 23, 2011 - 11:11am Addthis The winner of best overall app at the Environmental Protection Agency's (EPA) Apps for the Environment. | Video courtesy of Light Bulb Finder. Matthew Loveless Matthew Loveless Data Integration Specialist, Office of Public Affairs What does this mean for me? Light Bulb Finder, a free smartphone app, can help save money on home lighting. Quick, if I want to replace a 60-watt incandescent light bulb with an energy efficient fluorescent or LED bulb, what wattage should I choose to keep the same level of illumination? If you don't know, there's now an app for that. The winner of best overall app at the Environmental Protection Agency's (EPA) Apps for the Environment is called Light Bulb

98

Energy Efficiency Wins Top Prize at EPA App Contest | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Wins Top Prize at EPA App Contest Wins Top Prize at EPA App Contest Energy Efficiency Wins Top Prize at EPA App Contest November 23, 2011 - 11:11am Addthis The winner of best overall app at the Environmental Protection Agency's (EPA) Apps for the Environment. | Video courtesy of Light Bulb Finder. Matthew Loveless Matthew Loveless Data Integration Specialist, Office of Public Affairs What does this mean for me? Light Bulb Finder, a free smartphone app, can help save money on home lighting. Quick, if I want to replace a 60-watt incandescent light bulb with an energy efficient fluorescent or LED bulb, what wattage should I choose to keep the same level of illumination? If you don't know, there's now an app for that. The winner of best overall app at the Environmental Protection Agency's (EPA) Apps for the Environment is called Light Bulb

99

Vehicle Technologies Office: Electrical Machines  

NLE Websites -- All DOE Office Websites (Extended Search)

Electrical Machines to Electrical Machines to someone by E-mail Share Vehicle Technologies Office: Electrical Machines on Facebook Tweet about Vehicle Technologies Office: Electrical Machines on Twitter Bookmark Vehicle Technologies Office: Electrical Machines on Google Bookmark Vehicle Technologies Office: Electrical Machines on Delicious Rank Vehicle Technologies Office: Electrical Machines on Digg Find More places to share Vehicle Technologies Office: Electrical Machines on AddThis.com... Just the Basics Hybrid & Vehicle Systems Energy Storage Advanced Power Electronics & Electrical Machines Power Electronics Electrical Machines Thermal Control & System Integration Advanced Combustion Engines Fuels & Lubricants Materials Technologies Electrical Machines Emphasis in the electrical machines activity is on advanced motor

100

finite state machine  

Science Conference Proceedings (OSTI)

... Moore machine), multiple start states, transitions conditioned on no input symbol (a null) or more than one transition for a given symbol and state ( ...

2013-11-08T23:59:59.000Z

Note: This page contains sample records for the topic "goldberg machine contest" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Stirling machine operating experience  

Science Conference Proceedings (OSTI)

Numerous Stirling machines have been built and operated, but the operating experience of these machines is not well known. It is important to examine this operating experience in detail, because it largely substantiates the claim that stirling machines are capable of reliable and lengthy operating lives. The amount of data that exists is impressive, considering that many of the machines that have been built are developmental machines intended to show proof of concept, and are not expected to operate for lengthy periods of time. Some Stirling machines (typically free-piston machines) achieve long life through non-contact bearings, while other Stirling machines (typically kinematic) have achieved long operating lives through regular seal and bearing replacements. In addition to engine and system testing, life testing of critical components is also considered. The record in this paper is not complete, due to the reluctance of some organizations to release operational data and because several organizations were not contacted. The authors intend to repeat this assessment in three years, hoping for even greater participation.

Ross, B. [Stirling Technology Co., Richland, WA (United States); Dudenhoefer, J.E. [Lewis Research Center, Cleveland, OH (United States)

1994-09-01T23:59:59.000Z

102

Vehicle Technologies Office: Electrical Machines  

NLE Websites -- All DOE Office Websites (Extended Search)

Electrical Machines Emphasis in the electrical machines activity is on advanced motor technologies, performance, low-cost materials, and thermal control systems that will yield...

103

Human-machine interactions  

DOE Patents (OSTI)

Digital technology utilizing a cognitive model based on human naturalistic decision-making processes, including pattern recognition and episodic memory, can reduce the dependency of human-machine interactions on the abilities of a human user and can enable a machine to more closely emulate human-like responses. Such a cognitive model can enable digital technology to use cognitive capacities fundamental to human-like communication and cooperation to interact with humans.

Forsythe, J. Chris (Sandia Park, NM); Xavier, Patrick G. (Albuquerque, NM); Abbott, Robert G. (Albuquerque, NM); Brannon, Nathan G. (Albuquerque, NM); Bernard, Michael L. (Tijeras, NM); Speed, Ann E. (Albuquerque, NM)

2009-04-28T23:59:59.000Z

104

BCDA Machine Status Link  

NLE Websites -- All DOE Office Websites (Extended Search)

Machine Status Link Machine Status Link Version 1.33 (December 2005) David M. Kline. The Machine Status Link (MSL) is responsible for distributing the digitized beam current, injection status, P0 clock, and other statuses over a single fiber to several locations around the Storage Ring. The MRD100 is a VME-based module that is part of the MSL and was specifically designed for the APS. It receives and interprets information from the XMS100 module by means of copper or fiber. Signals from the XMS100 module are sent at a P0 rate (3.667 microseconds). It sends two registers every cycle and all in about 12 cycles. Refer to the ASD website for additional information regarding the MSL. The focus of this page is to provide information of how to configure the MRD100 for a beamline IOC and to discuss the sample IOC

105

Automated fiber pigtailing machine  

DOE Patents (OSTI)

The Automated Fiber Pigtailing Machine (AFPM) aligns and attaches optical fibers to optoelectronic (OE) devices such as laser diodes, photodiodes, and waveguide devices without operator intervention. The so-called pigtailing process is completed with sub-micron accuracies in less than 3 minutes. The AFPM operates unattended for one hour, is modular in design and is compatible with a mass production manufacturing environment. This machine can be used to build components which are used in military aircraft navigation systems, computer systems, communications systems and in the construction of diagnostics and experimental systems. 26 figs.

Strand, O.T.; Lowry, M.E.

1999-01-05T23:59:59.000Z

106

Operating the Lisp Machine  

E-Print Network (OSTI)

This document is a draft copy of a portion of the Lisp Machine window system manual. It is being published in this form now to make it available, since the complete window system manual is unlikely to be finished in the ...

Moon, David A.

107

Scalable formal machine models  

Science Conference Proceedings (OSTI)

In the past few years, we have seen machine-checked proofs of relatively large software systems, including compilers and micro-kernels. But like all formal arguments, the assurance gained by these mechanical proofs is only as good as the models we construct ...

Greg Morrisett

2012-12-01T23:59:59.000Z

108

Laser machining of explosives  

DOE Patents (OSTI)

The invention consists of a method for machining (cutting, drilling, sculpting) of explosives (e.g., TNT, TATB, PETN, RDX, etc.). By using pulses of a duration in the range of 5 femtoseconds to 50 picoseconds, extremely precise and rapid machining can be achieved with essentially no heat or shock affected zone. In this method, material is removed by a nonthermal mechanism. A combination of multiphoton and collisional ionization creates a critical density plasma in a time scale much shorter than electron kinetic energy is transferred to the lattice. The resulting plasma is far from thermal equilibrium. The material is in essence converted from its initial solid-state directly into a fully ionized plasma on a time scale too short for thermal equilibrium to be established with the lattice. As a result, there is negligible heat conduction beyond the region removed resulting in negligible thermal stress or shock to the material beyond a few microns from the laser machined surface. Hydrodynamic expansion of the plasma eliminates the need for any ancillary techniques to remove material and produces extremely high quality machined surfaces. There is no detonation or deflagration of the explosive in the process and the material which is removed is rendered inert.

Perry, Michael D. (Livermore, CA); Stuart, Brent C. (Fremont, CA); Banks, Paul S. (Livermore, CA); Myers, Booth R. (Livermore, CA); Sefcik, Joseph A. (Tracy, CA)

2000-01-01T23:59:59.000Z

109

Logically Possible Machines  

Science Conference Proceedings (OSTI)

I use modal logic and transfinite set-theory to define metaphysical foundations for a general theory of computation. A possible universe is a certain kind of situation; a situation is a set of facts. An algorithm is a certain kind of inductively defined ... Keywords: convergence, fixed-point, infinite algorithm, infinite machine, infinite mind, limit, possible world, situation, super-Turing computer

Eric Steinhart

2002-05-01T23:59:59.000Z

110

Submitted to Colin Cheyne, ed., Festschrift for Alan Musgrave A METHODOLOGICAL CRITIQUE OF THE SEMANTIC  

E-Print Network (OSTI)

handles narrative explanations. Consider, for example, a so-called Rube Goldberg machine. Here; for example, one early step is an case of oxidative decarboxylation. But unlike the Rube Goldberg machine

Koertge, Noretta

111

Coded output support vector machine  

Science Conference Proceedings (OSTI)

The authors propose a coded output support vector machine (COSVM) by introducing the idea of information coding to solve multi-class classification problems for large-scale datasets. The COSVM is built based on the support vector regression (SVR) machine ... Keywords: coded output, multi-class classification, number system, parallel implementation, support vector machine (SVM)

Tao Ye; Xuefeng Zhu

2012-07-01T23:59:59.000Z

112

Data envelopment analysis classification machine  

Science Conference Proceedings (OSTI)

This paper establishes the equivalent relationship between the data classification machine and the data envelopment analysis (DEA) model, and thus build up a DEA based classification machine. A data is characterized by a set of values. Without loss of ... Keywords: Classification machine, Data envelopment analysis, Preference cone

Hong Yan; Quanling Wei

2011-11-01T23:59:59.000Z

113

International Business Machines Corporation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Business Machines Corporation Business Machines Corporation Thomas J. Watson Research Center 1101 Kitchawan Road, NY 10598 Office of the Assistant General Counsel for Technology Transfer and Intellectual Property U.S. Department of Energy 1000 Independence Ave, SW, Washington DC 20585 ATTN: TECHNOLOGY TRANSFER QUESTIONS Sent electronically to GC-62@hq.doe.gov RE: Questions Concerning Technology Transfer Practices at DOE Laboratories Federal Register, Vol. 73, No. 229 Dear Mr. Gottlieb: IBM Corporation appreciates the opportunity to provide comments in response to the Department of Energy notice of inquiry. DOE Laboratories are a fundamental resource to government, industry, academia and the economy as a whole. All can benefit from efficient contracting processes and

114

Contested environmental policy infrastructure: Socio-political acceptance of renewable energy, water, and waste facilities  

Science Conference Proceedings (OSTI)

The construction of new infrastructure is hotly contested. This paper presents a comparative study on three environmental policy domains in the Netherlands that all deal with legitimising building and locating infrastructure facilities. Such infrastructure is usually declared essential to environmental policy and claimed to serve sustainability goals. They are considered to serve (proclaimed) public interests, while the adverse impact or risk that mainly concerns environmental values as well is concentrated at a smaller scale, for example in local communities. The social acceptance of environmental policy infrastructure is institutionally determined. The institutional capacity for learning in infrastructure decision-making processes in the following three domains is compared: 1.The implementation of wind power as a renewable energy innovation; 2.The policy on space-water adaptation, with its claim to implement a new style of management replacing the current practice of focusing on control and 'hard' infrastructure; 3.Waste policy with a focus on sound waste management and disposal, claiming a preference for waste minimization (the 'waste management hierarchy'). All three cases show a large variety of social acceptance issues, where the appraisal of the impact of siting the facilities is confronted with the desirability of the policies. In dealing with environmental conflict, the environmental capacity of the Netherlands appears to be low. The policies are frequently hotly contested within the process of infrastructure decision-making. Decision-making on infrastructure is often framed as if consensus about the objectives of environmental policies exists. These claims are not justified, and therefore stimulating the emergence of environmental conflicts that discourage social acceptance of the policies. Authorities are frequently involved in planning infrastructure that conflicts with their officially proclaimed policy objectives. In these circumstances, they are often confronted with local actors who support alternatives that are in fact better in tune with the new policy paradigm.

Wolsink, Maarten, E-mail: M.P.Wolsink@uva.n [Department of Geography, Planning and International Development Studies, University of Amsterdam, Nieuwe Prinsengracht 130, 1018 VZ Amsterdam (Netherlands)

2010-09-15T23:59:59.000Z

115

Machine Learning for Global Optimization  

E-Print Network (OSTI)

approach for global optimization in which machine learning is used to predict ..... In Figure 1 we show the level curves of the 2–dimensional Rastrigin function.

116

Power Electronics and Electric Machines  

NLE Websites -- All DOE Office Websites (Extended Search)

PEEM Activities Application Power Electronics Electric Machines Traction Drive System Inverter & Boost Converter (if needed) MotorGenerator Vehicle Power Management Bi-directional...

117

Cleaning of Free Machining Brass  

Science Conference Proceedings (OSTI)

We have investigated four brightening treatments proposed by two cleaning vendors for cleaning free machining brass. The experimental results showed that none of the proposed brightening treatments passed the swipe test. Thus, we maintain the recommendation of not using the brightening process in the cleaning of free machining brass for NIF application.

Shen, T

2005-12-29T23:59:59.000Z

118

Knowledge representation and machine translation  

Science Conference Proceedings (OSTI)

This paper describes a new knowledge representation called "frame knowledge representation-0" (FKR-0), and an experimental machine translation system named ATLAS/I which uses FKR-0.The purpose of FKR-0 is to stored information required for machine translation ...

Susumu Sawai; Hiromichi Fukushima; Masakatsu Sugimoto; Naoya Ukai

1982-07-01T23:59:59.000Z

119

MSc Design of Rotating Machines  

E-Print Network (OSTI)

design management and intellectual skills of communication in a group working environment. Focus on your interests The Machine Design specialism aims to provide students with a greater degree of training of stress analysis, machine dynamics, transmissions, computer aided engineering, and project management

120

Environmental constituents of Electrical Discharge Machining  

E-Print Network (OSTI)

Electrical Discharge Machining (EDM) is a non-traditional process that uses no mechanical forces to machine metals. It is extremely useful in machining hard materials. With the advantages EDM has to offer and its presence ...

Cho, Margaret H. (Margaret Hyunjoo), 1982-

2004-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "goldberg machine contest" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Heavy Machine Shop | Central Fabrication Services | Brookhaven...  

NLE Websites -- All DOE Office Websites (Extended Search)

Heavy Machine Shop Heavy Machine Shop The Heavy Machine Shop facility is located in building 479, and may be accessed by the main door on the north face or front of the building....

122

Machine Learning Benchmarks and Random Forest Regression  

E-Print Network (OSTI)

Machine Learning Benchmarks and Random Forest Regressionerror on a suite of benchmark datasets. As the basethe Machine Learning Benchmark Problems package; see http://

Segal, Mark R

2004-01-01T23:59:59.000Z

123

Free Machining Brasses with Minimized Lead Content  

Science Conference Proceedings (OSTI)

Abstract Scope, Article describes the role of lead in free machining brass and ... Similar legislative acts take care of lead content in free machined brass.

124

Ma'aden Open Mould Casting Machines  

Science Conference Proceedings (OSTI)

The paper will describe Ma'aden experience in ingot casting machines: commissioning and start-up, the challenges faced specially with De-molding machines, ...

125

Optimal Design of Electrical Machines: Mathematical Programming ...  

E-Print Network (OSTI)

for the same problem of the design of an electrical machine without slot. ... tion, inverse problem, design, electrical machine ..... trade-off situation arises.

126

Measurement Science for Smart Machine Tools  

Science Conference Proceedings (OSTI)

... ASME B5.59-2, "Information Technology for Machine Tools—Part 2: Data Specification for Properties of Machine tools for Milling and Turning,"and ...

2012-12-21T23:59:59.000Z

127

Akrong Machine Services | Open Energy Information  

Open Energy Info (EERE)

Machine Services Jump to: navigation, search Name Akron Machine Services Address 17 w. Rosewood Ave Place Akron, Ohio Zip 44301 Sector Carbon Product Manufacturing Phone...

128

Slide system for machine tools  

DOE Patents (OSTI)

The present invention relates to a machine tool which permits the machining of nonaxisymmetric surfaces on a workpiece while rotating the workpiece about a central axis of rotation. The machine tool comprises a conventional two-slide system (X-Y) with one of these slides being provided with a relatively short travel high-speed auxiliary slide which carries the material-removing tool. The auxiliary slide is synchronized with the spindle speed and the position of the other two slides and provides a high-speed reciprocating motion required for the displacement of the cutting tool for generating a nonaxisymmetric surface at a selected location on the workpiece.

Douglass, S.S.; Green, W.L.

1980-06-12T23:59:59.000Z

129

Recent advances in kernel machines  

Science Conference Proceedings (OSTI)

This talk will review recent advances in the kernel methods focusing on support vector machines (SVM) for pattern recognition. Topics discussed include the kernel design issue through the multi kernel approach and the optimization issue with emphasis ...

Stéphane Canu

2010-11-01T23:59:59.000Z

130

ASC_machines_cielo_2  

National Nuclear Security Administration (NNSA)

ASC 1 Top500 winners ASC supercomputers ASC future supercomputers Leading High-Performance Computing ASCI Red * First sustained teraFLOPS machine * 1 teraFLOPS * 1 TOP500 6...

131

Direct Semantics of Extended State Machines  

E-Print Network (OSTI)

In this paper we present semantic profiles for UML 2 state machines, which are based directly upon the structure of a state machine model, without requiring flattening or other transformations on these models. The approach addresses many of the semantic problems identified for state machines, and provides a basis for semantic analysis and proof of behavioural compatibility between state machines. 1

K. Lano; D. Clark

2007-01-01T23:59:59.000Z

132

Optimization Online - Optimal Design of Electrical Machines ...  

E-Print Network (OSTI)

Jun 8, 2011 ... Optimal Design of Electrical Machines: Mathematical Programming ... Science and Engineering (Multidisciplinary Design Optimization ).

133

Alpha Channeling in Mirror Machines  

SciTech Connect

Because of their engineering simplicity, high-?, and steady-state operation, mirror machines and related open-trap machines such as gas dynamic traps, are an attractive concept for achieving controlled nuclear fusion. In these open-trap machines, the confinement occurs by means of magnetic mirroring, without the magnetic field lines closing upon themselves within the region of particle confinement. Unfortunately, these concepts have not achieved to date very spectacular laboratory results, and their reactor prospects are dimmed by the prospect of a low Q-factor, the ratio of fusion power produced to auxiliary power. Nonetheless, because of its engineering promise, over the years numerous improvements have been proposed to enhance the reactor prospects of mirror fusion, such as tandem designs, end-plugging, and electric potential barriers.

Fisch N.J.

2005-10-19T23:59:59.000Z

134

Cooling system for rotating machine  

Science Conference Proceedings (OSTI)

An electrical machine comprising a rotor is presented. The electrical machine includes the rotor disposed on a rotatable shaft and defining a plurality of radial protrusions extending from the shaft up to a periphery of the rotor. The radial protrusions having cavities define a fluid path. A stationary shaft is disposed concentrically within the rotatable shaft wherein an annular space is formed between the stationary and rotatable shaft. A plurality of magnetic segments is disposed on the radial protrusions and the fluid path from within the stationary shaft into the annular space and extending through the cavities within the radial protrusions.

Gerstler, William Dwight (Niskayuna, NY); El-Refaie, Ayman Mohamed Fawzi (Niskayuna, NY); Lokhandwalla, Murtuza (Clifton Park, NY); Alexander, James Pellegrino (Ballston Lake, NY); Quirion, Owen Scott (Clifton Park, NY); Palafox, Pepe (Schenectady, NY); Shen, Xiaochun (Schenectady, NY); Salasoo, Lembit (Schenectady, NY)

2011-08-09T23:59:59.000Z

135

A New Approach to Abstract Machines - Introduction to the Theory of Configuration Machines  

E-Print Network (OSTI)

An abstract machine is a theoretical model designed to perform a rigorous study of computation. Such a model usually consists of configurations, instructions, programs, inputs and outputs for the machine. In this paper we formalize these notions as a very simple algebraic system, called a configuration machine. If an abstract machine is defined as a configuration machine consisting of primitive recursive functions then the functions computed by the machine are always recursive. The theory of configuration machines provides a useful tool to study universal machines.

Luo, Zhaohua

2010-01-01T23:59:59.000Z

136

Syntactic mismatches in machine translation  

Science Conference Proceedings (OSTI)

This paper addresses one of the central problems arising at the transfer stage in machine translation: syntactic mismatches, that is, mismatches between a source-language sentence structure and its equivalent target-language sentence structure. The level ... Keywords: Deep-syntactic structure, Meaning-Text Theory, Paraphrasing, Syntactic mismatch, Transfer

Igor Mel'?uk; Leo Wanner

2006-06-01T23:59:59.000Z

137

Machinable dissolved metal oxide superconductors  

DOE Patents (OSTI)

Powders of a metal oxide superconductor are mixed with sufficient amount (10--80 mol%) of In, Sn, and/or Al, to become nonbrittle, machinable. Preferred superconductors are YBa[sub 2]Cu[sub 3]O[sub 7[minus]x] and Bi-Sr-Ca-Cu-O compounds.

Chen, Chung-Hsuan.

1991-01-01T23:59:59.000Z

138

Arbitrary norm support vector machines  

Science Conference Proceedings (OSTI)

Support vector machines (SVM) are state-of-the-art classifiers. Typically L2-norm or L1-norm is adopted as a regularization term in SVMs, while other norm-based SVMs, for example, the L0-norm SVM or even the L?-norm ...

Kaizhu Huang; Danian Zheng; Irwin King; Michael R. Lyu

2009-02-01T23:59:59.000Z

139

Machine Shop Investigates PQ Issues  

Science Conference Proceedings (OSTI)

EPRI performed a power quality (PQ) audit to harden a machine shop against PQ-related issues. EPRI engineers investigated the various origins of existing PQ disturbances as well as the susceptibility of the plant equipment to these disturbances. This case study reports the findings of this detailed investigation.

2007-12-31T23:59:59.000Z

140

Polar Warnings A Lifelike Machine  

E-Print Network (OSTI)

States conducted its last underground nuclear test in 1992 and turned to Los Alamos and the other weapons Certification without Testing LOS ALAMOS DELIVERS THE FIRST NUCLEAR TRIGGER IN 20 YEARS A Lifelike Machine laboratories for a new approach to ensuring the continued safety and reliability of its nuclear deterrent

Note: This page contains sample records for the topic "goldberg machine contest" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Machinable dissolved metal oxide superconductors  

DOE Patents (OSTI)

Powders of a metal oxide superconductor are mixed with sufficient amount (10--80 mol%) of In, Sn, and/or Al, to become nonbrittle, machinable. Preferred superconductors are YBa{sub 2}Cu{sub 3}O{sub 7{minus}x} and Bi-Sr-Ca-Cu-O compounds.

Chen, Chung-Hsuan

1991-12-31T23:59:59.000Z

142

Human-Machine Function Allocation  

Science Conference Proceedings (OSTI)

Table 1   Human-machine function comparison...ability Comparatively slow and poor computers. Excellent and very rapid computers. Memory storage Poor short-term storage. Excellent long-term storage. Excellent short-term storage. Long-term storage very

143

Using linguistic knowledge in statistical machine translation  

E-Print Network (OSTI)

In this thesis, we present methods for using linguistically motivated information to enhance the performance of statistical machine translation (SMT). One of the advantages of the statistical approach to machine translation ...

Zbib, Rabih M. (Rabih Mohamed), 1974-

2010-01-01T23:59:59.000Z

144

Spatial Ontology in Factored Statistical Machine Translation  

Science Conference Proceedings (OSTI)

This paper presents a statistical phrase-based machine translation system which is enriched with semantic data coming from a spatial ontology. Paper presents the spatial ontology, how it is integrated in statistical machine translation system using factored ...

Raivis Skadi?š

2011-08-01T23:59:59.000Z

145

Integrated Inverter For Driving Multiple Electric Machines  

DOE Patents (OSTI)

An electric machine drive (50) has a plurality of inverters (50a, 50b) for controlling respective electric machines (57, 62), which may include a three-phase main traction machine (57) and two-phase accessory machines (62) in a hybrid or electric vehicle. The drive (50) has a common control section (53, 54) for controlling the plurality of inverters (50a, 50b) with only one microelectronic processor (54) for controlling the plurality of inverters (50a, 50b), only one gate driver circuit (53) for controlling conduction of semiconductor switches (S1-S10) in the plurality of inverters (50a, 50b), and also includes a common dc bus (70), a common dc bus filtering capacitor (C1) and a common dc bus voltage sensor (67). The electric machines (57, 62) may be synchronous machines, induction machines, or PM machines and may be operated in a motoring mode or a generating mode.

Su, Gui-Jia [Knoxville, TN; Hsu, John S [Oak Ridge, TN

2006-04-04T23:59:59.000Z

146

Software Tackles Production Line Machine ?Cyclic Jitters?  

Science Conference Proceedings (OSTI)

Software Tackles Production Line Machine 'Cyclic ... products, even shutting down assembly lines. ... high-speed data transmission characteristics of ...

2011-07-18T23:59:59.000Z

147

Automated energy monitoring of machine tools  

E-Print Network (OSTI)

in the energy usage, such as increased total consumption fortotal energy use for the machine tool based on the usage

Vijayaraghavan, Athulan; Dornfeld, David

2010-01-01T23:59:59.000Z

148

Do Accelerating Turing Machines Compute the Uncomputable?  

Science Conference Proceedings (OSTI)

Accelerating Turing machines have attracted much attention in the last decade or so. They have been described as "the work-horse of hypercomputation" (Potgieter and Rosinger 2010: 853). But do they really compute beyond the "Turing limit"--e.g., compute ... Keywords: ATM paradox, Accelerating Turing machine, Epistemic embedding, External and internal computation, Halting problem, Hypercomputation, Ontology of computing, Supertask, Thompson lamp paradox, Turing-machine purism, Turing-machine realism

B. Jack Copeland; Oron Shagrir

2011-05-01T23:59:59.000Z

149

Method and apparatus for monitoring machine performance  

DOE Patents (OSTI)

Machine operating conditions can be monitored by analyzing, in either the time or frequency domain, the spectral components of the motor current. Changes in the electric background noise, induced by mechanical variations in the machine, are correlated to changes in the operating parameters of the machine.

Smith, Stephen F. (Loudon, TN); Castleberry, Kimberly N. (Harriman, TN)

1996-01-01T23:59:59.000Z

150

Hindi to Punjabi machine translation system  

Science Conference Proceedings (OSTI)

Hindi-Punjabi being closely related language pair (Goyal V. and Lehal G. S., 2008), Hybrid Machine Translation approach has been used for developing Hindi to Punjabi Machine Translation System. Non-availability of lexical resources, spelling variations ... Keywords: Hindi, Punjabi, closely related languages, computational linguistics, machine translation, natural language processing, translate Hindi to Punjabi

Vishal Goyal; Gurpreet Singh Lehal

2011-06-01T23:59:59.000Z

151

Nano-Machines Achieve Huge Mechanical Breakthrough  

E-Print Network (OSTI)

NANO TECH Nano-Machines Achieve Huge Mechanical Breakthrough Dublin, Ireland (SPX) Sep 08, 2005 that use molecular 'nano'-machines of this kind to help perform physical tasks. Nano-machines could also owners set to return to battered Orleans l Six dead, two missing after heavy rains hit Page 1 of 3Nano

Leigh, David A.

152

Machine learning in space: extending our reach  

Science Conference Proceedings (OSTI)

We introduce the challenge of using machine learning effectively in space applications and motivate the domain for future researchers. Machine learning can be used to enable greater autonomy to improve the duration, reliability, cost-effectiveness, and ... Keywords: Autonomy, Machine learning applications, Space missions

Amy Mcgovern; Kiri L. Wagstaff

2011-09-01T23:59:59.000Z

153

A first look at cellular machine-to-machine traffic: large scale measurement and characterization  

Science Conference Proceedings (OSTI)

Cellular network based Machine-to-Machine (M2M) communication is fast becoming a market-changing force for a wide spectrum of businesses and applications such as telematics, smart metering, point-of-sale terminals, and home security and automation systems. ... Keywords: cellular network, machine-to-machine traffic

Muhammad Zubair Shafiq; Lusheng Ji; Alex X. Liu; Jeffrey Pang; Jia Wang

2012-06-01T23:59:59.000Z

154

Machine-to-Machine Communications and Security Solution in Cellular Systems  

Science Conference Proceedings (OSTI)

This paper introduces an efficient machine-to-machine M2M communication model based on 4G cellular systems. M2M terminals are capable of establishing Ad Hoc clusters wherever they are close enough. It is also possible to extend the cellular coverage ... Keywords: 4G Network, Ad Hoc, Machine-To-Machine, Security, Terminals

Mahdy Saedy; Vahideh Mojtahed

2011-04-01T23:59:59.000Z

155

A micro-machined resonator  

DOE Patents (OSTI)

This invention is comprised of a micro-machined resonator, typically quartz, with upper and lower micromachinable support members, or covers, having etched wells which may be lined with conductive electrode material, between the support members is a quartz resonator having an energy trapping quartz mesa capacitively coupled to the electrodes through a diaphragm; the quartz resonator is supported by either micro-machined cantilever springs or by thin layers extending over the surfaces of the support. If the diaphragm is rigid, clock applications are available, and if the diaphragm is resilient, then transducer applications can be achieved. Either the thin support layers or the conductive electrode material can be integral with the diaphragm. In any event, the covers are bonded to form a hermetic seal and the interior volume may be filled with a gas or may be evacuated. In addition, one or both of the covers may include oscillator and interface circuitry for the resonator.

Godshall, N.A.; Koehler, D.R.; Liang, A.Y.; Smith, B.K.

1991-12-31T23:59:59.000Z

156

A Link Means a Lot: Disulfide Tethering in Structure-Based  

E-Print Network (OSTI)

form (NADH, FADH2) to another (ATP). He said that this process was like a Rube Goldberg apparatus-level class are not familiar with Rube Goldberg apparatuses. Tonya: Every time he used that word [a Rube said that they knew what a Rube Goldberg machine was interpreted the analogy in a different way than

Hardy, Jeanne

157

172 Causation and din turn depends on Ct. Causal dependence is here intransitive: Ct  

E-Print Network (OSTI)

Rube Goldberg machine. Not that the chain must be foreseeable. You can kill someone no matter how good not. But the counterexamples get too contrived to be very per- suasive: imagine a lethal Rube Goldberg remarkable difference in circumstances would prevent his death. The same is true if you set a Rube Goldberg

Fitelson, Branden

158

Z Machine | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Z Machine | National Nuclear Security Administration Z Machine | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Z Machine Z Machine Home > About Us > Our Programs > Defense Programs > Office of Research, Development, Test, and Evaluation > Office of Inertial Confinement Fusion > Facilities > Z Machine Z Machine Z Machine Sandia National Laboratories

159

Machines  

Science Conference Proceedings (OSTI)

...are used to supply electrical energy for the welding operation. The transformer tap switch frequently is a rotary, eight-step, knife-type, fully enclosed locking switch, which provides convenient adjustment of the welding voltage to suit work

160

Experiments with the Dragon Machine  

Science Conference Proceedings (OSTI)

The basic characteristics of a self-sustaining chain reaction were demonstrated with the Chicago Pile in 1943, but it was not until early 1945 that sufficient enriched material became available to experimentally verify fast-neutron cross-sections and the kinetic characteristics of a nuclear chain reaction sustained with prompt neutrons alone. However, the demands of wartime and the rapid decline in effort following the cessation of hostilities often resulted in the failure to fully document the experiments or in the loss of documentation as personnel returned to civilian pursuits. When documented, the results were often highly classified. Even when eventually declassified, the data were often not approved for public release until years later.2 Even after declassification and approval for public release, the records are sometimes difficult to find. Through a fortuitous discovery, a set of handwritten notes by ''ORF July 1945'' entitled ''Dragon - Research with a Pulsed Fission Reactor'' was found by William L. Myers in an old storage safe at Pajarito Site of the Los Alamos National Laboratory3. Of course, ORF was identified as Otto R. Frisch. The document was attached to a page in a nondescript spiral bound notebook labeled ''494 Book'' that bore the signatures of Louis Slotin and P. Morrison. The notes also reference an ''Idea LS'' that can only be Louis Slotin. The discovery of the notes led to a search of Laboratory Archives, the negative files of the photo lab, and the Report Library for additional details of the experiments with the Dragon machine that were conducted between January and July 1945. The assembly machine and the experiments were carefully conceived and skillfully executed. The analyses--without the crutch of computers--display real insight into the characteristics of the nuclear chain reaction. The information presented here provides what is believed to be a complete collection of the original documentation of the observations made with the Dragon Machine in early 1945.

R.E. Malenfant

2005-08-12T23:59:59.000Z

Note: This page contains sample records for the topic "goldberg machine contest" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Free-piston cutting machine  

DOE Patents (OSTI)

A cutting machine includes a gun barrel for receiving a projectile. A compression tube is disposed in flow communication with the barrel and includes a piston therein. A reservoir is disposed in flow communication with the tube and receives a first gas under pressure. A second gas fills the compression tube on a front face of the piston. And, the pressurized first gas is discharged into the tube on a back face of the piston to accelerate the piston through the tube for compressing the second gas, and in turn launching the projectile through the barrel to impact a workpiece.

Ciccarelli, Gaby (East Setauket, NY); Subudhi, Manomohan (East Setauket, NY); Hall, Robert E. (Port Jefferson, NY)

2000-01-01T23:59:59.000Z

162

Hypervelocity cutting machine and method  

DOE Patents (OSTI)

A method and machine are provided for cutting a workpiece such as concrete. A gun barrel is provided for repetitively loading projectiles therein and is supplied with a pressurized propellant from a storage tank. A thermal storage tank is disposed between the propellant storage tank and the gun barrel for repetitively receiving and heating propellant charges which are released in the gun barrel for repetitively firing projectiles therefrom toward the workpiece. In a preferred embodiment, hypervelocity of the projectiles is obtained for cutting the concrete workpiece by fracturing thereof. 10 figs.

Powell, J.R.; Reich, M.

1996-11-12T23:59:59.000Z

163

Hypervelocity cutting machine and method  

DOE Patents (OSTI)

A method and machine 14 are provided for cutting a workpiece 12 such as concrete. A gun barrel 16 is provided for repetitively loading projectiles 22 therein and is supplied with a pressurized propellant from a storage tank 28. A thermal storage tank 32,32A is disposed between the propellant storage tank 28 and the gun barrel 16 for repetitively receiving and heating propellant charges which are released in the gun barrel 16 for repetitively firing projectiles 22 therefrom toward the workpiece 12. In a preferred embodiment, hypervelocity of the projectiles 22 is obtained for cutting the concrete workpiece 12 by fracturing thereof.

Powell, James R. (Shoreham, NY); Reich, Morris (Queens, NY)

1996-11-12T23:59:59.000Z

164

Micro-machined calorimetric biosensors  

DOE Patents (OSTI)

A method and apparatus are provided for detecting and monitoring micro-volumetric enthalpic changes caused by molecular reactions. Micro-machining techniques are used to create very small thermally isolated masses incorporating temperature-sensitive circuitry. The thermally isolated masses are provided with a molecular layer or coating, and the temperature-sensitive circuitry provides an indication when the molecules of the coating are involved in an enthalpic reaction. The thermally isolated masses may be provided singly or in arrays and, in the latter case, the molecular coatings may differ to provide qualitative and/or quantitative assays of a substance.

Doktycz, Mitchel J. (Knoxville, TN); Britton, Jr., Charles L. (Alcoa, TN); Smith, Stephen F. (Loudon, TN); Oden, Patrick I. (Plano, TX); Bryan, William L. (Knoxville, TN); Moore, James A. (Powell, TN); Thundat, Thomas G. (Knoxville, TN); Warmack, Robert J. (Knoxville, TN)

2002-01-01T23:59:59.000Z

165

Rapid Response Small Machining NNR Project 703025  

SciTech Connect

This project was an effort to develop a machining area for small sized parts that is capable of delivering product with a quick response time. This entailed focusing efforts on leaning out specific work cells that would result in overall improvement to the entire machining area. This effort involved securing the most efficient available technologies for these areas. In the end, this incorporated preparing the small machining area for transformation to a new facility.

Kanies, Tim

2008-12-05T23:59:59.000Z

166

Automated energy monitoring of machine tools  

E-Print Network (OSTI)

studies to correlate energy usage with the operations beinghas characterized machining energy usage solely based on theplanning, process energy usage was characterized solely by

Vijayaraghavan, Athulan; Dornfeld, David

2010-01-01T23:59:59.000Z

167

Single machine stochastic appointment sequencing and scheduling  

E-Print Network (OSTI)

linear combination of job waiting time, machine idle time, and overtime. .... Through straightforward but lengthy analysis we found finite values for M1 and M2.

168

High pressure water jet mining machine  

DOE Patents (OSTI)

A high pressure water jet mining machine for the longwall mining of coal is described. The machine is generally in the shape of a plowshare and is advanced in the direction in which the coal is cut. The machine has mounted thereon a plurality of nozzle modules each containing a high pressure water jet nozzle disposed to oscillate in a particular plane. The nozzle modules are oriented to cut in vertical and horizontal planes on the leading edge of the machine and the coal so cut is cleaved off by the wedge-shaped body.

Barker, Clark R. (Rolla, MO)

1981-05-05T23:59:59.000Z

169

6.685 Electric Machines, Fall 2003  

E-Print Network (OSTI)

Treatment of electromechanical transducers, rotating and linear electric machines. Lumped-parameter electromechanics of interaction. Development of device characteristics: energy conversion density, efficiency; and of ...

Kirtley, James L.

170

Automated energy monitoring of machine tools  

E-Print Network (OSTI)

Potential for Energy Consumption in Discrete Part Productionprocessing Reducing the energy consumption of machine toolsthis, monitoring of energy consumption patterns in the

Vijayaraghavan, Athulan; Dornfeld, David

2010-01-01T23:59:59.000Z

171

Machine and Beam Delivery Updates  

NLE Websites -- All DOE Office Websites (Extended Search)

MAchine and Beam delivery Updates FY13 MAchine and Beam delivery Updates FY13 Summary of Beam Delivery: FACET Summary Feb_15_22.pdf FACET Summary Feb_15_22.pdf FACET Summary Feb_23_Mar_1.pdf FACET Summary Feb_23_Mar_1.pdf FACET Summary Mar_2_8.pdf FACET Summary Mar_2_8.pdf FACET Summary Mar_9_15.pdf FACET Summary Mar_9_15.pdf FACET Summary Mar_16_22.pdf FACET Summary Mar_16_22.pdf FACET Summary Mar_23_29.pdf FACET Summary Mar_23_29.pdf FACET Summary Mar_30_Apr_5.pdf FACET Summary Mar_30_Apr_5.pdf FACET Summary Apr_6_12.pdf FACET Summary Apr_6_12.pdf FACET Summary Apr_27_May_3.pdf FACET Summary Apr_27_May_3.pdf FACET Summary May_4_10.pdf FACET Summary May_4_10.pdf Emittance Stability in Sector 2_31513.pdf Emittance Stability in Sector 2_31513.pdf FACET beam operations readiness with R56.pdf FACET beam operations readiness with R56.pdf (6/19/2013)

172

Micro-machined resonator oscillator  

DOE Patents (OSTI)

A micro-miniature resonator-oscillator is disclosed. Due to the miniaturization of the resonator-oscillator, oscillation frequencies of one MHz and higher are utilized. A thickness-mode quartz resonator housed in a micro-machined silicon package and operated as a telemetered sensor beacon'' that is, a digital, self-powered, remote, parameter measuring-transmitter in the FM-band. The resonator design uses trapped energy principles and temperature dependence methodology through crystal orientation control, with operation in the 20--100 MHz range. High volume batch-processing manufacturing is utilized, with package and resonator assembly at the wafer level. Unique design features include squeeze-film damping for robust vibration and shock performance, capacitive coupling through micro-machined diaphragms allowing resonator excitation at the package exterior, circuit integration and extremely small (0.1 in. square) dimensioning. A family of micro-miniature sensor beacons is also disclosed with widespread applications as bio-medical sensors, vehicle status monitors and high-volume animal identification and health sensors. The sensor family allows measurement of temperatures, chemicals, acceleration and pressure. A microphone and clock realization is also available. 21 figs.

Koehler, D.R.; Sniegowski, J.J.; Bivens, H.M.; Wessendorf, K.O.

1994-08-16T23:59:59.000Z

173

Micro-machined resonator oscillator  

DOE Patents (OSTI)

A micro-miniature resonator-oscillator is disclosed. Due to the miniaturization of the resonator-oscillator, oscillation frequencies of one MHz and higher are utilized. A thickness-mode quartz resonator housed in a micro-machined silicon package and operated as a "telemetered sensor beacon" that is, a digital, self-powered, remote, parameter measuring-transmitter in the FM-band. The resonator design uses trapped energy principles and temperature dependence methodology through crystal orientation control, with operation in the 20-100 MHz range. High volume batch-processing manufacturing is utilized, with package and resonator assembly at the wafer level. Unique design features include squeeze-film damping for robust vibration and shock performance, capacitive coupling through micro-machined diaphragms allowing resonator excitation at the package exterior, circuit integration and extremely small (0.1 in. square) dimensioning. A family of micro-miniature sensor beacons is also disclosed with widespread applications as bio-medical sensors, vehicle status monitors and high-volume animal identification and health sensors. The sensor family allows measurement of temperatures, chemicals, acceleration and pressure. A microphone and clock realization is also available.

Koehler, Dale R. (Albuquerque, NM); Sniegowski, Jeffry J. (Albuquerque, NM); Bivens, Hugh M. (Albuquerque, NM); Wessendorf, Kurt O. (Albuquerque, NM)

1994-01-01T23:59:59.000Z

174

Tabu search heuristic for two-machine flowshop with batch processing machines  

Science Conference Proceedings (OSTI)

Batch processing machines are frequently encountered in many industrial environments. A batch processing machine is one which can process several jobs simultaneously as a batch. The processing time of a batch is equal to the largest processing time of ... Keywords: Batch processing machines, Flowshop, MILP model, Tabu search

Li-Man Liao; Ching-Jen Huang

2011-04-01T23:59:59.000Z

175

A two-stage stochastic programming model for the parallel machine scheduling problem with machine capacity  

Science Conference Proceedings (OSTI)

This paper proposes a two-stage stochastic programming model for the parallel machine scheduling problem where the objective is to determine the machines' capacities that maximize the expected net profit of on-time jobs when the due dates are uncertain. ... Keywords: Average sample approximation, Parallel machine scheduling, Ranking and selection, Stochastic programming, Weighted number of on-time jobs

Talal Al-Khamis; Rym M'Hallah

2011-12-01T23:59:59.000Z

176

Review: Virtual machine tools and virtual machining-A technological review  

Science Conference Proceedings (OSTI)

Virtual manufacturing systems provide a useful means for products to be manufactured 'right the first time' without the need of physical testing on the shop floor. Earlier research was mostly on developing a virtual manufacturing environment. Over the ... Keywords: Machining simulation, Virtual machine tool, Virtual machining, Virtual system

Aini Abdul Kadir; Xun Xu; Enrico Hämmerle

2011-06-01T23:59:59.000Z

177

Nontraditional Machining of Dies and Molds  

Science Conference Proceedings (OSTI)

...instability (Ref 9, 10). When coupled with ultrafast controllers operating on 2 μs control loops and glass scales to directly measure the motion of the machines axes, linear motors enable EDM machines to react to process instabilities quickly, leading to increased process speed and decreased risk of...

178

Improving vehicle aeroacoustics using machine learning  

Science Conference Proceedings (OSTI)

This paper presents a new approach to improving the overall aeroacoustic comfort of a vehicle, an important feature of vehicle design. The traditional improvement process is extended to benefit extensively from machine learning, information retrieval ... Keywords: Aeroacoustics, Automobile industry, Machine learning, Noise frequency spectrum analysis, Process automation

Damjan Kunar; Martin Moina; Marina Giordanino; Ivan Bratko

2012-08-01T23:59:59.000Z

179

Quantum Cloning Machines and the Applications  

E-Print Network (OSTI)

No-cloning theorem is fundamental for quantum mechanics and for quantum information science that states an unknown quantum state cannot be cloned perfectly. However, we can try to clone a quantum state approximately with the optimal fidelity, or instead, we can try to clone it perfectly with the largest probability. Thus various quantum cloning machines have been designed for different quantum information protocols. Specifically, quantum cloning machines can be designed to analyze the security of quantum key distribution protocols such as BB84 protocol, six-state protocol, B92 protocol and their generalizations. Some well-known quantum cloning machines include universal quantum cloning machine, phase-covariant cloning machine, the asymmetric quantum cloning machine and the probabilistic quantum cloning machine etc. In the past years, much progress has been made in studying quantum cloning machines and their applications and implementations, both theoretically and experimentally. In this review, we will give a complete description of those important developments about quantum cloning and some related topics. On the other hand, this review is self-consistent, and in particular, we try to present some detailed formulations so that further study can be taken based on those results. In addition, this review also contains some new results, for example, the study of quantum retrodiction protocol.

Heng Fan; Yi-Nan Wang; Li Jing; Jie-Dong Yue; Han-Duo Shi; Yong-Liang Zhang; Liang-Zhu Mu

2013-01-14T23:59:59.000Z

180

Following directions using statistical machine translation  

Science Conference Proceedings (OSTI)

Mobile robots that interact with humans in an intuitive way must be able to follow directions provided by humans in unconstrained natural language. In this work we investigate how statistical machine translation techniques can be used to bridge the gap ... Keywords: human-robot interaction, instruction following, natural language, navigation, statistical machine translation

Cynthia Matuszek; Dieter Fox; Karl Koscher

2010-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "goldberg machine contest" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Bagging and Boosting statistical machine translation systems  

Science Conference Proceedings (OSTI)

In this article we address the issue of generating diversified translation systems from a single Statistical Machine Translation (SMT) engine for system combination. Unlike traditional approaches, we do not resort to multiple structurally different SMT ... Keywords: Ensemble learning, Statistical machine translation, System combination

Tong Xiao; Jingbo Zhu; Tongran Liu

2013-02-01T23:59:59.000Z

182

Comparison of crowdsourcing translation with Machine Translation  

Science Conference Proceedings (OSTI)

In this paper we examine the model of crowdsourcing for translation and compare it with Machine Translation (MT). The large volume of material to be translated, the translation of this material into many languages combined with tight deadlines lead enterprises ... Keywords: Machine Translation, crowdsourcing, empirical data, human translation, quality

Dimitra Anastasiou; Rajat Gupta

2011-12-01T23:59:59.000Z

183

Machine Translation Errors: English and Iraqi Arabic  

Science Conference Proceedings (OSTI)

Errors in machine translations of English-Iraqi Arabic dialogues were analyzed using the methods developed for the Human Translation Error Rate measure (HTER). Human annotations were used to refine the Translation Error Rate (TER) annotations. The analyses ... Keywords: Arabic, English, error analysis, evaluation, statistical machine translation

S. Condon; D. Parvaz; J. Aberdeen; C. Doran; A. Freeman; M. Awad

2011-03-01T23:59:59.000Z

184

A Machine Vision System for Inspecting Bearings  

Science Conference Proceedings (OSTI)

In this paper, we describe a machine vision system for inspecting bearings, which are an important part of electro-mechanical kWh meters. The system consists of a personal computer with a frame grabber, a black and white progressive scan CCD camera, ... Keywords: machine vision, quality control, bearing, eccentricity

2000-09-01T23:59:59.000Z

185

Using artificially generated data to evaluate statistical machine translation  

Science Conference Proceedings (OSTI)

Although Statistical Machine Translation (SMT) is now the dominant paradigm within Machine Translation, we argue that it is far from clear that it can outperform Rule-Based Machine Translation (RBMT) on small- to medium-vocabulary applications where ...

Manny Rayner; Paula Estrella; Pierrette Bouillon; Beth Ann Hockey; Yukie Nakao

2009-08-01T23:59:59.000Z

186

A hybrid type small 5-axis CNC milling machine  

E-Print Network (OSTI)

5-axis CNC milling machines are important in a number of industries ranging from aerospace to consumer-die-mold machining because they can deliver high machining accuracy with a spindle tilting capacity. Most of these ...

Son, Seung-Kil, 1964-

2002-01-01T23:59:59.000Z

187

DOE - Office of Legacy Management -- La Pointe Machine and Tool...  

Office of Legacy Management (LM)

La Pointe Machine and Tool Co - MA 16 FUSRAP Considered Sites Site: LA POINTE MACHINE AND TOOL CO. (MA.16 ) Eliminated from consideration under FUSRAP Designated Name: Not...

188

Electric machine for hybrid motor vehicle - Energy Innovation ...  

A power system for a motor vehicle having an internal combustion engine and an electric machine is disclosed. The electric machine has a stator, a permanent magnet ...

189

John Hsu, Oak Ridge National Laboratory, Flux Coupling Machines...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Flux Coupling Machines and Switched Reluctance Motors to Replace Permanent Magnets in Electric Vehicles John Hsu, Oak Ridge National Laboratory, Flux Coupling Machines and...

190

Hybrid MPI/OpenMP parallel support vector machine training  

E-Print Network (OSTI)

Jan 6, 2009 ... Support Vector Machines are a powerful machine learning technol- ..... to the precision recall curve were evaluated on the Challenge web-.

191

Multi-winding homopolar electric machine - Energy Innovation Portal  

A multi-winding homopolar electric machine and method for converting between mechanical energy and electrical energy. The electric machine includes a shaft defining ...

192

Ultraprecision machining of optics at Los Alamos  

Science Conference Proceedings (OSTI)

Ultraprecision machine tools are used at Los Alamos for single point diamond turning of optics and other precision parts. Measurements of a 50-mm-dia copper flat are used to illustrate the quality of a part which can be machined on the Moore No. 3 lathe. Measurements of a 0.4-m-dia aluminum mirror with a 20-m radius-of-curvature are presented as an example of a part machined on the Moore No. 5 lathe. A varying frequency sine wave grating is used to show a type of special optical grating which can be produced using the Pneumo lathe.

Rhorer, R.L.; Gauler, A.L.; Colston, E.W.; Ruhe, J.R.

1981-01-01T23:59:59.000Z

193

Electric machine for hybrid motor vehicle  

DOE Patents (OSTI)

A power system for a motor vehicle having an internal combustion engine and an electric machine is disclosed. The electric machine has a stator, a permanent magnet rotor, an uncluttered rotor spaced from the permanent magnet rotor, and at least one secondary core assembly. The power system also has a gearing arrangement for coupling the internal combustion engine to wheels on the vehicle thereby providing a means for the electric machine to both power assist and brake in relation to the output of the internal combustion engine.

Hsu, John Sheungchun (Oak Ridge, TN)

2007-09-18T23:59:59.000Z

194

Machine Partitions | Argonne Leadership Computing Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

BG/Q Drivers Status Machine Overview Machine Partitions Torus Network Data Storage & File Systems Compiling & Linking Queueing & Running Jobs Data Transfer Debugging & Profiling Performance Tools & APIs Software & Libraries IBM References Intrepid/Challenger/Surveyor Tukey Eureka / Gadzooks Policies Documentation Feedback Please provide feedback to help guide us as we continue to build documentation for our new computing resource. [Feedback Form] Machine Partitions Mira As our production machine, the queues on Mira are very similar to those on our BG/P system Intrepid. In the prod-capability queue, partition sizes of 8192, 12288, 16384, 32768, and 49152 nodes are available. All partitions have a full torus network. The max runtime of jobs submitted to the

195

Computational aesthetic evaluation: steps towards machine creativity  

Science Conference Proceedings (OSTI)

Programmer and artists have invented a broad range of generative systems that create art and music. These powerful systems sometimes produce results that surprise their human collaborators, but the surprises are not always welcome or useful. Machine ...

Philip Galanter

2012-08-01T23:59:59.000Z

196

Machine Learning for Sequential Data: A Review  

Science Conference Proceedings (OSTI)

Statistical learning problems in many fields involve sequential data. This paper formalizes the principal learning tasks and describes the methods that have been developed within the machine learning research community for addressing these problems. ...

Thomas G. Dietterich

2002-08-01T23:59:59.000Z

197

CCG supertags in factored statistical machine translation  

Science Conference Proceedings (OSTI)

Combinatorial Categorial Grammar (CCG) supertags present phrase-based machine translation with an opportunity to access rich syntactic information at a word level. The challenge is incorporating this information into the translation process. Factored ...

Alexandra Birch; Miles Osborne; Philipp Koehn

2007-06-01T23:59:59.000Z

198

March 8, 2006: Sandia's Z Machine  

Energy.gov (U.S. Department of Energy (DOE))

March 8, 2006The Department's Sandia National Laboratories announces that its Z machine has produced plasmas that exceed temperatures of 2 billion degrees Kelvin-hotter than the interiors of stars....

199

An environment machine for the ??-calculus  

Science Conference Proceedings (OSTI)

We introduce a natural deduction-like formalisation of Parigot's ??-calculus. From this, we derive an environment machine that allows any well-typed ??-term to be reduced to its weak head normal form. The soundness and completeness ...

Philippe De Groote

1998-12-01T23:59:59.000Z

200

Machine translation system combination by confusion forest  

Science Conference Proceedings (OSTI)

The state-of-the-art system combination method for machine translation (MT) is based on confusion networks constructed by aligning hypotheses with regard to word similarities. We introduce a novel system combination framework in which hypotheses are ...

Taro Watanabe; Eiichiro Sumita

2011-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "goldberg machine contest" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

A machine learning system for recognizing subclasses  

Science Conference Proceedings (OSTI)

Thematic information extraction from remote sensing images is a complex task. In this demonstration, we present *Miner machine learning system. In particular, we demonstrate an advanced subclass recognition algorithm that is specifically designed to ...

Ranga Raju Vatsavai

2012-07-01T23:59:59.000Z

202

Machine Status | Argonne Leadership Computing Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

Machine Status Science on Mira Cores Core Hours Atomistic Simulations of Nanoscale Oxides and Oxide Interfaces 65536 1297201.9256901 Lattice QCD 16384 28881.396622179 MockBOSS :...

203

Revisiting parallel rendering for shared memory machines  

Science Conference Proceedings (OSTI)

Increasing the core count of CPUs to increase computational performance has been a significant trend for the better part of a decade. This has led to an unprecedented availability of large shared memory machines. Programming paradigms and systems are ...

B. Nouanesengsy; J. Ahrens; J. Woodring; H. Shen

2011-04-01T23:59:59.000Z

204

Virtualisation: Real security for virtual machines  

Science Conference Proceedings (OSTI)

Server virtualisation offers many real benefits to enterprises, maximising hardware resources and providing significant cost and energy savings. But there is a downside: all of the security issues we battle on networked systems also plague virtual machines, ...

Ulf Mattsson

2009-04-01T23:59:59.000Z

205

DESIGN FOR AN AUTOGRAPHICALLY RECORDING TENSILE MACHINE  

SciTech Connect

An improved "hard" type tensile machine is described, designed primarily for metallurgical usage. Compactness and mechanical simplicity are combined with maximum accessibility of the load measuring device and specimen, and the load is measured with an electro-mechanical dynamometer which is easily adapted into a system for autographically recording ihe load-elongaticn curve. The machine should be particularly useful for dry-box or hot-cell work. (auth)

Adams, M.A.

1959-10-01T23:59:59.000Z

206

Baseline Test Specimen Machining Report  

SciTech Connect

The Next Generation Nuclear Plant (NGNP) Project is tasked with selecting a high temperature gas reactor technology that will be capable of generating electricity and supplying large amounts of process heat. The NGNP is presently being designed as a helium-cooled high temperature gas reactor (HTGR) with a large graphite core. The graphite baseline characterization project is conducting the research and development (R&D) activities deemed necessary to fully qualify nuclear-grade graphite for use in the NGNP reactor. Establishing nonirradiated thermomechanical and thermophysical properties by characterizing lot-to-lot and billet-to-billet variations (for probabilistic baseline data needs) through extensive data collection and statistical analysis is one of the major fundamental objectives of the project. The reactor core will be made up of stacks of graphite moderator blocks. In order to gain a more comprehensive understanding of the varying characteristics in a wide range of suitable graphites, any of which can be classified as “nuclear grade,” an experimental program has been initiated to develop an extensive database of the baseline characteristics of numerous candidate graphites. Various factors known to affect the properties of graphite will be investigated, including specimen size, spatial location within a graphite billet, specimen orientation within a billet (either parallel to [P] or transverse to [T] the long axis of the as-produced billet), and billet-to-billet variations within a lot or across different production lots. Because each data point is based on a certain position within a given billet of graphite, particular attention must be paid to the traceability of each specimen and its spatial location and orientation within each billet. The evaluation of these properties is discussed in the Graphite Technology Development Plan (Windes et. al, 2007). One of the key components in the evaluation of these graphite types will be mechanical testing on specimens drawn from carefully controlled sections of each billet. To this end, this report will discuss the machining of the first set of test specimens that will be evaluated in this program through tensile, compressive, and flexural testing. Validation that the test specimens have been produced to the tolerances required by the applicable ASTM standards, and to the quality control levels required by this program, will demonstrate the viability of sending graphite to selected suppliers that will provide valuable and certifiable data to future data sets that are integral to the NGNP program and beyond.

mark Carroll

2009-08-01T23:59:59.000Z

207

Machine Maintenance Integrated Performance Support System  

SciTech Connect

The objectives of this partnership project were to develop a preventive maintenance checklist program, a troubleshooting system for the Vertical Turning Center (VTC)-5, an on-line manual, and to integrate these components with a custom browser that would run on the VTC-5 machine's controller and would support future internet/intranet delivery. Kingsbury provided subject matter experts from engineering, manufacturing, and technical support. They also provided photographs, schematics, and CAD drawings, which AlliedSignal Federal Manufacturing and Technologies (ASFM and T) digitized for use in the final program. Information from The Kingsbury troubleshooting experts were interviewed regarding symptoms and root causes of system malfunctions This knowledge was captured and from it, fault trees were developed. These trees were then incorporated into the EPSS as a troubleshooting tool. The troubleshooting portion of the system presents simple questions to the machine operator in order to determine the likely cause or causes of malfunctions and then recommends systematic corrective actions. The on-line reference manual, covering operations and maintenance, provides text and illustrations to the machine operator in a traditional structure, but additionally offers the capability to search voluminous amounts of technical data and retrieve specific information on request. The maintenance portion of the EPSS includes checklists that are displayed daily, weekly, monthly, and annually, as appropriate, on the VTC-5 controller screen. The controller software is unavailable for machining parts until the machine tool operator goes through and checks off all of the checklist items. This project provided the team with a detailed understanding of the knowledge and information required to produce and support advanced machine tools. In addition, it resulted in the design and construction of a prototype VTC-5 EPSS containing all the logic and interfaces necessary to integrate operations and maintenance information from other Kingsbury machine tools.

Bohley, M.C.; Schwartz, M.E.

1998-03-11T23:59:59.000Z

208

International Conference on Machine Control & Guidance 2008 1 Automatic Guidance of Track Laying Machines with  

E-Print Network (OSTI)

laying machines, coordinate systems, error detection, work process driven data management, quality. Its outstanding result, the track management system Toporail, was developed under the operational lead on Machine Control & Guidance 2008 5 Figure 5: Maintenance process driven data management: Data updates

209

Cost Effective Machining Of Ceramics (CEMOC)  

SciTech Connect

The purpose of the CEMOC program was to support U.S. industry needs in fabricating precision components, from difficult to machine materials, while maintaining and enhancing the precision manufacturing skills of the Oak Ridge Complex. Oak Ridge and partner company personnel worked in a team relationship wherein each contributed equally to the success of the program. In general, Oak Ridge contributed a wider range of expertise to a given task while the companies provided operations-specific equipment and shop-floor services. Process control technologies, machining procedures and parameters, and coolant-related environmental tasks were the primary focus areas. The companies were very pleased with the results of the CRADAs and are planning on continuing the relationships. Finish machining operations contribute the majority of the costs associated with fabricating high quality ceramic products. These components are typically used in harsh environments such as diesel engines, defense machinery, and automotive components. The required finishing operations involve a variety of technologies including process controls, machine coolants, product certification, etc. and are not limited only to component grinding methods. The broad range of manufacturing problem solving expertise available in Oak Ridge provided resources that were far beyond what are typically available to the CRADA partners. These partners contributed equipment, such as state-of-the-art machine tools, and operation-specific experience base. In addition, addressing these challenging tasks enabled Oak Ridge personnel to maintain familiarity with rapidly advancing technologies, such as those associated with computer control systems.

Barkman, W.E.

1997-04-18T23:59:59.000Z

210

Trunnion Collar Removal Machine - Gap Analysis Table  

SciTech Connect

The purpose of this document is to review the existing the trunnion collar removal machine against the ''Nuclear Safety Design Bases for License Application'' (NSDB) [Ref. 10] requirements and to identify codes and standards and supplemental requirements to meet these requirements. If these codes and standards can not fully meet these requirements then a ''gap'' is identified. These gaps will be identified here and addressed using the ''Trunnion Collar Removal Machine Design Development Plan'' [Ref. 15]. The codes and standards, supplemental requirements, and design development requirements for the trunnion collar removal machine are provided in the gap analysis table (Appendix A, Table 1). Because the trunnion collar removal machine is credited with performing functions important to safety (ITS) in the NSDB [Ref. 10], design basis requirements are applicable to ensure equipment is available and performs required safety functions when needed. The gap analysis table is used to identify design objectives and provide a means to satisfy safety requirements. To ensure that the trunnion collar removal machine performs required safety functions and meets performance criteria, this portion of the gap analysis tables supplies codes and standards sections and the supplemental requirements and identifies design development requirements, if needed.

M. Johnson

2005-06-27T23:59:59.000Z

211

TMS Video Contest  

Science Conference Proceedings (OSTI)

TMS ENERGY INITIATIVES ... Web 2.0 social networking initiative at TMS 2010 by watching and selecting your favorite video, which earn the video star ratings!

212

TMS Student Contests  

Science Conference Proceedings (OSTI)

STUDENT MEMBER LINKS. MEMBERS ONLY Access all of your TMS member benefits here [MORE]; STUDENT CHAPTER PROGRAM Learn how to join or ...

213

TMS Video Contest  

Science Conference Proceedings (OSTI)

There is no fee to enter; however, you are responsible for any costs you may incur for creating and submitting your video. By submitting your video in this ...

214

Judges for Student Contests  

Science Conference Proceedings (OSTI)

as well as tech each year at t wishing to att grants. availability to student, curre ents to help m any opportun s & engineers. Lounge (near impson, Mem materials .

215

Best Paper Contest  

Science Conference Proceedings (OSTI)

Students are encouraged to submit essays on global or national issues as well as technical research papers, relating to any field of metallurgy or materials ...

216

DOE Solar Decathlon: Contests  

NLE Websites -- All DOE Office Websites (Extended Search)

Architecture Market Appeal Engineering Communications Affordability Comfort Zone Hot Water Appliances Home Entertainment Energy Balance Juries News Photos Videos Consumer...

217

Student Poster Contest  

Science Conference Proceedings (OSTI)

Feb 28, 2011 ... The distribution of well-dispersed nano-SiCp got a range of ... material epoxy resin using for power transformer apparatus and molding material ...

218

Student Paper Contest Winners  

Science Conference Proceedings (OSTI)

by Sumit Goenka, Carnegie Mellon University ... by Lisa A. Deibler, Case Western Reserve University ... 2nd Place: Jiantao Liu, University of Kentucky ...

219

New and Underutilized Technology: Vending Machine Occupancy Sensors |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Vending Machine Occupancy Sensors Vending Machine Occupancy Sensors New and Underutilized Technology: Vending Machine Occupancy Sensors October 7, 2013 - 9:09am Addthis The following information outlines key deployment considerations for vending machine occupancy sensors within the Federal sector. Benefits Vending machine occupancy sensors detect when no people are in the vicinity and powers down beverage vending machines. These systems do not completely turn off compressor, but reduce their run times. Application Vending machine occupancy sensors are applicable in most building categories where vending machines are present. Key Factors for Deployment Occupancy sensors or similar features should be an integral part of new vending machine purchases. Ranking Criteria Federal energy savings, cost-effectiveness, and probability of success are

220

Machine Overview | Argonne Leadership Computing Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

BG/Q Drivers Status Machine Overview Machine Partitions Torus Network Data Storage & File Systems Compiling & Linking Queueing & Running Jobs Data Transfer Debugging & Profiling Performance Tools & APIs Software & Libraries IBM References Intrepid/Challenger/Surveyor Tukey Eureka / Gadzooks Policies Documentation Feedback Please provide feedback to help guide us as we continue to build documentation for our new computing resource. [Feedback Form] Machine Overview Blue Gene /Q systems are composed of login nodes, I/O nodes, and compute nodes. Login Nodes Login and compile nodes are IBM Power 7-based systems running Red Hat Linux and are the user's interface to a Blue Gene/Q system. This is where users login, edit files, compile, and submit jobs. These are shared resources

Note: This page contains sample records for the topic "goldberg machine contest" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

RHIC Machine/Detector Planning Meetings  

NLE Websites -- All DOE Office Websites (Extended Search)

RHIC Machine/Detector Planning Meeting RHIC Machine/Detector Planning Meeting RHIC STAR PHENIX RHIC STAR PHENIX BNL Home Page C-AD Home Page C-AD ES&F Division BNL Physics Department RHIC Run History Super Conducting Magnet Division Run 14 Scheduling Physicist Home Page NPP PAC Run 13 Recommendations CAD Power Run 11-Run 13 Off-line CNI Polarization Results APEX for Run 13 RHIC Machine/Detector Meetings for Run 12 FY02-Present C-AD Energy Use Plots Cryo Power Run 11-Run 13 H-jet Target Results APEX Nov. 19-20, 2012 Workshop for Run 13 RHIC Run 13 Run Home Page (pp) FY10-Present BNL Energy Use Plot Cryo Temperatures Latest Luminosity Plots BNL Current Energy Use (BNL Intranet only and requires password) RHIC Retreat 2012

222

Gallant Precision Machining GPM | Open Energy Information  

Open Energy Info (EERE)

Gallant Precision Machining GPM Gallant Precision Machining GPM Jump to: navigation, search Name Gallant Precision Machining (GPM) Place Hsinchu, Taiwan Sector Solar Product Engaged in the design and manufacture of solar cell manufacturing equpiment. Coordinates 24.69389°, 121.148064° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":24.69389,"lon":121.148064,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

223

Micro-machined thermo-conductivity detector  

DOE Patents (OSTI)

A micro-machined thermal conductivity detector for a portable gas chromatograph. The detector is highly sensitive and has fast response time to enable detection of the small size gas samples in a portable gas chromatograph which are in the order of nanoliters. The high sensitivity and fast response time are achieved through micro-machined devices composed of a nickel wire, for example, on a silicon nitride window formed in a silicon member and about a millimeter square in size. In addition to operating as a thermal conductivity detector, the silicon nitride window with a micro-machined wire therein of the device can be utilized for a fast response heater for PCR applications.

Yu, Conrad (Antioch, CA)

2003-01-01T23:59:59.000Z

224

Multi-winding homopolar electric machine  

SciTech Connect

A multi-winding homopolar electric machine and method for converting between mechanical energy and electrical energy. The electric machine includes a shaft defining an axis of rotation, first and second magnets, a shielding portion, and a conductor. First and second magnets are coaxial with the shaft and include a charged pole surface and an oppositely charged pole surface, the charged pole surfaces facing one another to form a repulsive field therebetween. The shield portion extends between the magnets to confine at least a portion of the repulsive field to between the first and second magnets. The conductor extends between first and second end contacts and is toroidally coiled about the first and second magnets and the shield portion to develop a voltage across the first and second end contacts in response to rotation of the electric machine about the axis of rotation.

Van Neste, Charles W

2012-10-16T23:59:59.000Z

225

High slot utilization systems for electric machines  

DOE Patents (OSTI)

Two new High Slot Utilization (HSU) Systems for electric machines enable the use of form wound coils that have the highest fill factor and the best use of magnetic materials. The epoxy/resin/curing treatment ensures the mechanical strength of the assembly of teeth, core, and coils. In addition, the first HSU system allows the coil layers to be moved inside the slots for the assembly purpose. The second system uses the slided-in teeth instead of the plugged-in teeth. The power density of the electric machine that uses either system can reach its highest limit.

Hsu, John S (Oak Ridge, TN)

2009-06-23T23:59:59.000Z

226

Passive machine augmented composite for multifunctional properties  

E-Print Network (OSTI)

This dissertation studies by experiment and numerical analysis an advanced composite material (Machine Augmented Composite or MAC) for enhancement of the passive damping while maintaining its stiffness. This MAC is composed of a pre-buckled wall structure placed within a viscoelastic matrix. The pre-buckled machine can contain viscous fluids for additional energy dissipation. For the experiments, the MAC was fabricated by using rigid and soft polyurethane as a machine and matrix material respectively. Various viscosity fluids (0.83 ~ 4730 cps) filled the inner-channel of the machine structure. Dynamic properties such as tan ?? and the loss modulus (E") of the composite were measured and compared with those of a homogeneous matrix sample over a frequency range of 0.1 to 100 Hz at room temperature through load-controlled cyclic testing. Measured tan ?? and loss modulus values for the composite were higher than those of the matrix alone in the 1 to 40 Hz range. However the viscous fluid effects on the overall damping properties were small. The performance of a theoretical MAC was explored through numerical analysis. The amount of inner-channel gap closure was calculated for various matrix Poisson??s ratios, for various Young??s modulus ratios between the machine and matrix (Emachine/Ematrix), and for the volume fraction of the machines. The most desirable performance of the composite was obtained when the matrix Poisson??s ratio was 0.49, and there was interaction between the Emachine/Ematrix and the volume fraction of the machines. Also the proper volume fraction range of the machine was predicted to be between 0.15 and 0.2 for the lamina shape MAC. Based upon the analysis, a sandwich structure MAC was fabricated and tested. This composite showed 11 times higher stiffness than the matrix without loosing the matrix damping property. This dissertation shows that the research met these objectives: 1) the MAC concept is effective for passive damping of vibrations, 2) that material combinations studied here had optimal combinations for best performance, and 3) that this is a promising field study for future passive and active materials development.

Kim, Jong Hyun

2005-08-01T23:59:59.000Z

227

CSP Theorems for Communicating B Machines  

E-Print Network (OSTI)

CSP Theorems for Communicating B Machines Steve Schneider and Helen Treharne Technical Report CSD #12;#12;Introduction 1 Abstract. Recent work on combining CSP and B has provided ways of describing sys- tems comprised of components described in both B (to express requirements on state) and CSP (to

Doran, Simon J.

228

MACHINE SHOP SAFETY POLICY THE WYSS INSTITUTE  

E-Print Network (OSTI)

Health 210 Lincoln Street 617-432-1370 617-355-7580 617-632-0710 617-632-3016 617-353-6630 617 Research Building (NRB) Security: For lockouts and escorts 617-432-6119 Harvard Custodial Services 617 in the Wyss Institute for Biologically Inspired Engineering (Wyss Institute) light machine shops in the Center

Church, George M.

229

Rankine cycle machines for solar cooling  

DOE Green Energy (OSTI)

A vigorous effort to develop and demonstrate practical uses of solar energy to heat and cool buildings, to process agricultural products, and to provide thermal and electrical energy for industry has been initiated. One significant part of this effort is the research, development, and demonstration of Rankine cycle machines using fluids heated by solar energy. Recent developments in three such devices are discussed briefly.

Weathers, H.M.

1978-08-01T23:59:59.000Z

230

Data management for the world's largest machine  

Science Conference Proceedings (OSTI)

The world's largest machine, the Large Hadron Collider, will have four detectors whose output is expected to answer fundamental questions about the universe. The ATLAS detector is expected to produce 3.2 PB of data per year which will be distributed ...

Sigve Haug; Farid Ould-Saada; Katarina Pajchel; Alexander L. Read

2006-06-01T23:59:59.000Z

231

Gas quantitative analysis with support vector machine  

Science Conference Proceedings (OSTI)

Gas sensor array is an important part of electronic nose. The gas analysis performance of electronic nose is affected badly by the cross sensitivity of gas sensor array. In order to solve the problem of the cross sensitivity, in this work a new method ... Keywords: electronic nose, gas mixture, quantitative analysis, support vector machine

Liang Xie; Xiaodong Wang

2009-06-01T23:59:59.000Z

232

Performance implications of virtualizing multicore cluster machines  

Science Conference Proceedings (OSTI)

High performance computers are typified by cluster machines constructed from multicore nodes and using high performance interconnects like Infiniband. Virtualizing such 'capacity computing' platforms implies the shared use of not only the nodes and node ... Keywords: Infiniband, high-performance computing, virtualization

Adit Ranadive; Mukil Kesavan; Ada Gavrilovska; Karsten Schwan

2008-03-01T23:59:59.000Z

233

HEART SMART NUTRITION Be a Lean Machine  

E-Print Network (OSTI)

Lesson 6 HEART SMART NUTRITION Be a Lean Machine This Heart Smart Nutrition series can help you Heart, Lung and Blood Institute). Physical activity increases your metabolic rate, which helps to burn more calories. Plus it helps the heart and lungs function to full capacity. Exercise also helps raise

234

Preprocessing unbalanced data using support vector machine  

Science Conference Proceedings (OSTI)

This paper deals with the application of support vector machine (SVM) to deal with the class imbalance problem. The objective of this paper is to examine the feasibility and efficiency of SVM as a preprocessor. Our study analyzes different classification ... Keywords: COIL data, Hybrid method, Preprocessor, SVM, Unbalanced data

M. A. H. Farquad; Indranil Bose

2012-04-01T23:59:59.000Z

235

Design of a desktop milling machine for fabrication in an introductory machine shop class  

E-Print Network (OSTI)

The purpose of this research is to design, fabricate and test the electromechanical subsystem of a CNC milling machine kit. Unlike all other CNC kits on the market, the purpose of this kit is to teach students the principles ...

Lorenc, Dan (Daniel P.)

2010-01-01T23:59:59.000Z

236

Tolerating latency in replicated state machines through client speculation  

Science Conference Proceedings (OSTI)

Replicated state machines are an important and widely-studied methodology for tolerating a wide range of faults. Unfortunately, while replicas should be distributed geographically for maximum fault tolerance, current replicated state machine protocols ...

Benjamin Wester; James Cowling; Edmund B. Nightingale; Peter M. Chen; Jason Flinn; Barbara Liskov

2009-04-01T23:59:59.000Z

237

Proceedings of the 25th international conference on Machine learning  

Science Conference Proceedings (OSTI)

This volume contains the papers accepted to the 25th International Conference on Machine Learning (ICML 2008). ICML is the annual conference of the International Machine Learning Society (IMLS), and provides a venue for the presentation and discussion ...

William Cohen; Andrew McCallum; Sam Roweis

2008-07-01T23:59:59.000Z

238

Forecasting electricity demand by hybrid machine learning model  

Science Conference Proceedings (OSTI)

This paper proposes a hybrid machine learning model for electricity demand forecasting, based on Bayesian Clustering by Dynamics (BCD) and Support Vector Machine (SVM). In the proposed model, a BCD classifier is firstly applied to cluster the input data ...

Shu Fan; Chengxiong Mao; Jiadong Zhang; Luonan Chen

2006-10-01T23:59:59.000Z

239

The RWTH Aachen machine translation system for WMT 2012  

Science Conference Proceedings (OSTI)

This paper describes the statistical machine translation (SMT) systems developed at RWTH Aachen University for the translation task of the NAACL 2012 Seventh Workshop on Statistical Machine Translation (WMT 2012). We participated in the evaluation ...

Matthias Huck; Stephan Peitz; Markus Freitag; Malte Nuhn; Hermann Ney

2012-06-01T23:59:59.000Z

240

Virtual cutter path display for dental milling machine  

E-Print Network (OSTI)

This paper presents the prototype of a mixed reality system using the computer controlled dental milling machine, which is called MRD Mill. First, overview of the core dental milling machine developed in this study is ...

Ito, Teruaki

Note: This page contains sample records for the topic "goldberg machine contest" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Machine Learning Forensics for Law Enforcement, Security, and Intelligence  

Science Conference Proceedings (OSTI)

Increasingly, crimes and fraud are digital in nature, occurring at breakneck speed and encompassing large volumes of data. To combat this unlawful activity, knowledge about the use of machine learning technology and software is critical. Machine Learning ...

Jesus Mena

2011-06-01T23:59:59.000Z

242

Seattle City Light - Vending Machine Rebate Program | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

of VendingMiser Energy Efficient Vending Machines. VendingMiser reduces the energy consumption of cold drink vending machines by using an occupancy sensor to power down the...

243

A Bahadur Representation of the Linear Support Vector Machine  

Science Conference Proceedings (OSTI)

The support vector machine has been successful in a variety of applications. Also on the theoretical front, statistical properties of the support vector machine have been studied quite extensively with a particular attention to its Bayes risk consistency ...

Ja-Yong Koo; Yoonkyung Lee; Yuwon Kim; Changyi Park

2008-06-01T23:59:59.000Z

244

Electricity: The Energy of Tomorrow (A "Life at the Frontiers of Energy Research" contest entry from the 2011 Energy Frontier Research Centers (EFRCs) Summit and Forum)  

DOE Green Energy (OSTI)

'Electricity: the Energy of Tomorrow' was submitted by the Energy Materials Center at Cornell (emc2) to the 'Life at the Frontiers of Energy Research' video contest at the 2011 Science for Our Nation's Energy Future: Energy Frontier Research Centers (EFRCs) Summit and Forum. Twenty-six EFRCs created short videos to highlight their mission and their work. emc2, an EFRC directed by Hector D. Abruna at Cornell University (lead) is a partnership between Cornell and Lawrence Berkeley National Laboratory. The Office of Basic Energy Sciences in the U.S. Department of Energy's Office of Science established the 46 Energy Frontier Research Centers (EFRCs) in 2009. These collaboratively-organized centers conduct fundamental research focused on 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The overall purpose is to accelerate scientific progress toward meeting the nation's critical energy challenges.

Abruna, Hector D. (Director, Energy Materials Center at Cornell); emc2 Staff

2011-05-01T23:59:59.000Z

245

PARC - Scientific Exchange Program (A "Life at the Frontiers of Energy Research" contest entry from the 2011 Energy Frontier Research Centers (EFRCs) Summit and Forum)  

DOE Green Energy (OSTI)

'PARC - Scientific Exchange Program' was submitted by the Photosynthetic Antenna Research Center (PARC) to the 'Life at the Frontiers of Energy Research' video contest at the 2011 Science for Our Nation's Energy Future: Energy Frontier Research Centers (EFRCs) Summit and Forum. Twenty-six EFRCs created short videos to highlight their mission and their work. PARC, an EFRC directed by Robert E. Blankenship at Washington University in St. Louis, is a partnership of scientists from ten institutions. The Office of Basic Energy Sciences in the U.S. Department of Energy's Office of Science established the 46 Energy Frontier Research Centers (EFRCs) in 2009. These collaboratively-organized centers conduct fundamental research focused on 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The overall purpose is to accelerate scientific progress toward meeting the nation's critical energy challenges.

Blankenship, Robert E. (Director, Photosynthetic Antenna Research Center); PARC Staff

2011-05-01T23:59:59.000Z

246

Magnesium: Digital Resource Center - ARTICLE: Safe Machining of ...  

Science Conference Proceedings (OSTI)

Sep 7, 2007... Other ==== Miscellaneous Digital Resources in Magnesium. Spacer ... Topic Title: ARTICLE: Safe Machining of Magnesium Parts by Cutting ...

247

NIST Open Machine Translation (OpenMT) Evaluation  

Science Conference Proceedings (OSTI)

DARPA TIDES Machine Translation 2004 Evaluation (MT04). Current and Recent DARPA TIDES MT Activities. MT04 takes ...

248

A Reordering Model for Phrase-Based Machine Translation  

Science Conference Proceedings (OSTI)

This paper presents a new method for reordering in phrase based statistical machine translation (PBSMT). Our method is based on previous chunk-level reordering methods for PBSMT. Our method is a global reordering. First, we parse the source language ... Keywords: Machine Translation, Natural Language Processing, Phrase-based Statistical Machine Translation

Vinh Nguyen; Thai Phuong Nguyen; Akira Shimazu; Minh Nguyen

2008-08-01T23:59:59.000Z

249

Argument based machine learning in a medical domain  

Science Conference Proceedings (OSTI)

Argument Based Machine Learning (ABML) is a new approach to machine learning in which the learning examples can be accompanied by arguments. The arguments for specific examples are a special form of expert's knowledge which the expert uses to substantiate ... Keywords: Argument Based Machine Learning, Bacterial Infections, Geriatric Population, Rule Learning

Jure Žabkar; Martin Možina; Jerneja Vide?nik; Ivan Bratko

2006-05-01T23:59:59.000Z

250

Interacting meaningfully with machine learning systems: Three experiments  

Science Conference Proceedings (OSTI)

Although machine learning is becoming commonly used in today's software, there has been little research into how end users might interact with machine learning systems, beyond communicating simple ''right/wrong'' judgments. If the users themselves could ... Keywords: Explanations, Intelligent user interfaces, Machine learning, Rich feedback

Simone Stumpf; Vidya Rajaram; Lida Li; Weng-Keen Wong; Margaret Burnett; Thomas Dietterich; Erin Sullivan; Jonathan Herlocker

2009-08-01T23:59:59.000Z

251

Improving energy efficiency of buffer cache in virtual machines  

Science Conference Proceedings (OSTI)

Main memory contributes a large fraction of energy consumption in powerful servers running virtualization software to support concurrent virtual machines (VMs). Furthermore, data-intensive applications executing inside virtual machines increase the demand ... Keywords: Buffer Cache,Virtual Machine,Energy Management

Lei Ye; Chris Gniady

2012-06-01T23:59:59.000Z

252

Long Term Climate Simulations Using an Adaptable Virtual Machine.  

E-Print Network (OSTI)

the DOE NERSC, a re­ mote machine could be added to the virtual machine until the NERSC account test bed. Another is to include the NERSC machines at LBL, the Cray C90 and the Cray T3E connections, particularly into NERSC, would be important for the success of this project. The latency

253

Constructive hidden nodes selection of extreme learning machine for regression  

Science Conference Proceedings (OSTI)

In this paper, we attempt to address the architectural design of ELM regressor by applying a constructive method on the basis of ELM algorithm. After the nonlinearities of ELM network are fixed by randomly generating the parameters, the network will ... Keywords: Constructive method, Error-minimized extreme learning machine, Extreme learning machine, Incremental extreme learning machine

Yuan Lan; Yeng Chai Soh; Guang-Bin Huang

2010-10-01T23:59:59.000Z

254

A real-time virtual machine implementation for small microcontrollers  

Science Conference Proceedings (OSTI)

A way to host a full general purpose virtual machine (VM) interpreter on a very small microcontroller platform is described. This machine provides a comprehensive set of general and enhanced functionality efficiently by abstracting the VM instruction ... Keywords: Microcontrollers, Real-time systems, Virtual machine

W. Roger Davis; Phillip A. Laplante; Bo I. Sandén

2012-09-01T23:59:59.000Z

255

Scheduling a capacitated batch-processing machine to minimize makespan  

Science Conference Proceedings (OSTI)

This paper aims at improving the utilization of a single batch-processing machine. The batch-processing machine can process a batch of jobs, as long as the number of jobs and the total size of all the jobs in a batch do not violate the machine's capacity. ... Keywords: Batch processing, Mathematical modeling, Scheduling, Simulated annealing

Purushothaman Damodaran; Krishnaswami Srihari; Sarah S. Lam

2007-04-01T23:59:59.000Z

256

Virtual Data System on distributed virtual machines in computational grids  

Science Conference Proceedings (OSTI)

This paper presents the work of building a Grid workflow system on distributed virtual machines. A Grid Virtualisation Engine (GVE) is implemented to manage virtual machines as computing resources for Grid applications. The Virtual Data System ... Keywords: compact muon solenoid, distributed virtual machines, grid computing, grid workflow, high energy physics applications, virtual data systems

Lizhe Wang; Gregor Von Laszewski; Jie Tao; Marcel Kunze

2010-09-01T23:59:59.000Z

257

Super-tasks, accelerating Turing machines and uncomputability  

Science Conference Proceedings (OSTI)

Accelerating Turing machines are devices with the same computational structure as Turing machines (TM), but able to perform super-tasks. We ask whether performing super-tasks alone produces more computational power; for example, whether accelerating ... Keywords: Thomson's paradox, accelerating Turing machines, halting problem, super-task

Oron Shagrir

2004-06-01T23:59:59.000Z

258

Estimation of synchronous machine parameters by standstill tests  

Science Conference Proceedings (OSTI)

In this paper we present the results of a time-domain identification procedure to estimate the linear parameters of a salient-pole synchronous machine at standstill. A new approach is proposed for the estimation of synchronous machine coupled to DC-chopper ... Keywords: Parameter estimation, Standstill tests, Synchronous machine

M. Hasni; O. Touhami; R. Ibtiouen; M. Fadel; S. Caux

2010-10-01T23:59:59.000Z

259

Mechanical design of a desktop milling machine for fabrication in an introductory machining class by Johannes Schneider.  

E-Print Network (OSTI)

The purpose of this research is the mechanical design of a miniature desktop milling machine for use as an alternative class project in MIT's introductory machining course 2.670. This research is important, because a ...

Schneider, Johannes (Johannes A.)

2010-01-01T23:59:59.000Z

260

Hybrid-secondary uncluttered induction machine  

DOE Patents (OSTI)

An uncluttered secondary induction machine (100) includes an uncluttered rotating transformer (66) which is mounted on the same shaft as the rotor (73) of the induction machine. Current in the rotor (73) is electrically connected to current in the rotor winding (67) of the transformer, which is not electrically connected to, but is magnetically coupled to, a stator secondary winding (40). The stator secondary winding (40) is alternately connected to an effective resistance (41), an AC source inverter (42) or a magnetic switch (43) to provide a cost effective slip-energy-controlled, adjustable speed, induction motor that operates over a wide speed range from below synchronous speed to above synchronous speed based on the AC line frequency fed to the stator.

Hsu, John S. (Oak Ridge, TN)

2001-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "goldberg machine contest" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

R&D ERL: Machine Protection System  

SciTech Connect

The Machine Protection System (MPS) is a device-safety system that is designed to prevent damage to hardware by generating interlocks, based upon the state of input signals generated by selected sub-system. It exists to protect key machinery such as the 50 kW and 1 MW RF Systems. When a fault state occurs, the MPS is capable of responding with an interlock signal within several microseconds. The Machine Protection System inputs are designed to be fail-safe. In addition, all fault conditions are latched and time-stamped. The ERL MPS is based on a National Instruments hardware platform, and is programmed by utilizing National Instruments development environment for a visual programming language.

Altinbas, Z.

2010-01-01T23:59:59.000Z

262

Walcot Electric Machines | Open Energy Information  

Open Energy Info (EERE)

Walcot Electric Machines Walcot Electric Machines Jump to: navigation, search Name Walcot Electric Machines Place Bath, United Kingdom Zip BA2 7AY Sector Efficiency Product A spin-out from Bath University which that will develop and licence process relating to high efficiency electric motors for fixed speed applications, and will offer endusers substantial reductions in the cost of operation Coordinates 45.467055°, -98.329279° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":45.467055,"lon":-98.329279,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

263

Dovetail spoke internal permanent magnet machine  

Science Conference Proceedings (OSTI)

An internal permanent magnet (IPM) machine is provided. The IPM machine includes a stator assembly and a stator core. The stator core also includes multiple stator teeth. The stator assembly is further configured with stator windings to generate a stator magnetic field when excited with alternating currents and extends along a longitudinal axis with an inner surface defining a cavity. The IPM machine also includes a rotor assembly and a rotor core. The rotor core is disposed inside the cavity and configured to rotate about the longitudinal axis. The rotor assembly further includes a shaft. The shaft further includes multiple protrusions alternately arranged relative to multiple bottom structures provided on the shaft. The rotor assembly also includes multiple stacks of laminations disposed on the protrusions and dovetailed circumferentially around the shaft. The rotor assembly further includes multiple pair of permanent magnets for generating a magnetic field, which magnetic field interacts with the stator magnetic field to produce a torque. The multiple pair of permanent magnets are disposed between the stacks. The rotor assembly also includes multiple middle wedges mounted between each pair of the multiple permanent magnets.

Alexander, James Pellegrino (Ballston Lake, NY); EL-Refaie, Ayman Mohamed Fawzi (Niskayuna, NY); Lokhandwalla, Murtuza (Clifton Park, NY); Shah, Manoj Ramprasad (Latham, NY); VanDam, Jeremy Daniel (West Coxsackie, NY)

2011-08-23T23:59:59.000Z

264

Positional reference system for ultraprecision machining  

DOE Patents (OSTI)

A stable positional reference system for use in improving the cutting tool-to-part contour position in numerical controlled-multiaxis metal turning machines is provided. The reference system employs a plurality of interferometers referenced to orthogonally disposed metering bars which are substantially isolated from machine strain induced position errors for monitoring the part and tool positions relative to the metering bars. A microprocessor-based control system is employed in conjunction with the plurality of position interferometers and part contour description data inputs to calculate error components for each axis of movement and output them to corresponding axis drives with appropriate scaling and error compensation. Real-time position control, operating in combination with the reference system, makes possible the positioning of the cutting points of a tool along a part locus with a substantially greater degree of accuracy than has been attained previously in the art by referencing and then monitoring only the tool motion relative to a reference position located on the machine base.

Arnold, Jones B. (Knoxville, TN); Burleson, Robert R. (Clinton, TN); Pardue, Robert M. (Knoxville, TN)

1982-01-01T23:59:59.000Z

265

Positional reference system for ultraprecision machining  

DOE Patents (OSTI)

A stable positional reference system for use in improving the cutting tool-to-part contour position in numerical controlled-multiaxis metal turning machines is provided. The reference system employs a plurality of interferometers referenced to orthogonally disposed metering bars which are substantially isolated from machine strain induced position errors for monitoring the part and tool positions relative to the metering bars. A microprocessor-based control system is employed in conjunction with the plurality of positions interferometers and part contour description data input to calculate error components for each axis of movement and output them to corresponding axis driven with appropriate scaling and error compensation. Real-time position control, operating in combination with the reference system, makes possible the positioning of the cutting points of a tool along a part locus with a substantially greater degree of accuracy than has been attained previously in the art by referencing and then monitoring only the tool motion relative to a reference position located on the machine base.

Arnold, J.B.; Burleson, R.R.; Pardue, R.M.

1980-09-12T23:59:59.000Z

266

Parameter optimization of modern machining processes using teaching-learning-based optimization algorithm  

Science Conference Proceedings (OSTI)

Modern machining processes are now-a-days widely used by manufacturing industries in order to produce high quality precise and very complex products. These modern machining processes involve large number of input parameters which may affect the cost ... Keywords: Abrasive jet machining, Modern machining processes, Parameter optimization, TLBO algorithm, Ultrasonic machining, Wire electrical discharge machining

R. Venkata Rao; V. D. Kalyankar

2013-01-01T23:59:59.000Z

267

Photo of the Week: The Z Machine | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

The Z Machine The Z Machine Photo of the Week: The Z Machine September 21, 2012 - 11:08am Addthis The Z machine, the largest X-ray generator in the world, is located in Albuquerque, New Mexico. As part of the Pulsed Power Program, which started at Sandia National Laboratories in the 1960s, the Z machine concentrates electrical energy and turns it into short pulses of enormous power, which can then be used to generate X-rays and gamma rays. Click on the image for a full size version. | Photo credit: Randy Montoya/Sandia National Laboratories. The Z machine, the largest X-ray generator in the world, is located in Albuquerque, New Mexico. As part of the Pulsed Power Program, which started at Sandia National Laboratories in the 1960s, the Z machine concentrates electrical energy and turns it into short pulses of enormous power, which

268

El Ma Electronic Machining srl | Open Energy Information  

Open Energy Info (EERE)

Ma Electronic Machining srl Ma Electronic Machining srl Jump to: navigation, search Name El.Ma. Electronic Machining srl Place Riva del Garda (TN), Italy Zip 38066 Sector Hydro, Hydrogen, Solar, Wind energy Product String representation "Italy-based, in ... solar sectors." is too long. References El.Ma. Electronic Machining srl[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. El.Ma. Electronic Machining srl is a company located in Riva del Garda (TN), Italy . References ↑ "El.Ma. Electronic Machining srl" Retrieved from "http://en.openei.org/w/index.php?title=El_Ma_Electronic_Machining_srl&oldid=344591" Categories: Clean Energy Organizations Companies Organizations

269

Laboratory Directed Research and Development Final Report Intelligent Tools for On-Machine Acceptance of Precision Machined Components  

E-Print Network (OSTI)

On-Machine Acceptance (OMA) is an agile manufacturing concept being developed for machine tools at SNL. The concept behind OMA is the integration of product design, fabrication, and qualification processes by using the machining center as a fabrication and inspection tool. This report documents the final results of a Laboratory Directed Research and Development effort to qualify OMA. Intelligent Tools for On-Machine Acceptance of Precision Machined Components 2 Acknowledgments Thanks to Don Sheaffer, Department 8120, Mark Powell, Department 9611, and Marcey Abate, Department 12323, for their contributions to this final report. Thanks to Tony Bryce, and Dennis Clingan, Department 1484, Phil Skogmo, Department 2645, and Charles Steinhaus, Department 8240, for their assistance in writing this report. Intelligent Tools for On-Machine Acceptance of Precision Machined Components 3 Contents 1.0 Introduction .................................................................................

Naomi Christensen Precision; Naomi G. Christensen; Lane D. Harwell; Andrew Hazelton

1996-01-01T23:59:59.000Z

270

Machine augmented composite materials for damping purposes  

E-Print Network (OSTI)

In this study the energy dissipation performance of machine augmented composite (MAC) materials is investigated. MAC materials are formed by inserting simple machines into a matrix material. In this work the machines take the form of fluid filled tubes, and the tube cross-sectional geometry induces fluid flow when it is deformed in its plane. This flow dissipates mechanical energy, and thus provides the composite material with attractive damping properties. The objective of this study is to gain insight into the geometry, the material property combinations, and the boundary conditions that are effective in producing high damping MAC materials. Particular attention is given to tube geometry and to dimensionless parameters that govern the energy dissipation efficiency of a MAC lamina. An important dimensionless parameter is the ratio of solid elastic moduli to the product of the driving frequency and the fluid dynamic viscosity. This is a measure of the ratio of elastic forces in the solid material to the viscous forces in the fluid material that makes up a MAC lamina. Governing equations and simulation methods are discussed. Simplified equations are derived to predict the pressure generated when a tube/matrix cell is squeezed with zero pressure end conditions. Transient, three dimensional finite element models are also used to predict the performance of the damping MAC materials with zero pressure at the ends of the tubes. For the geometry and material properties considered, the highest energy dissipation efficiency predicted by these models is approximately 0.8 out of a maximum of 1.0.

McCutcheon, David Matthew

2004-12-01T23:59:59.000Z

271

Ccg supertags in factored statistical machine translation  

E-Print Network (OSTI)

Combinatorial Categorial Grammar (CCG) supertags present phrase-based machine translation with an opportunity to access rich syntactic information at a word level. The challenge is incorporating this information into the translation process. Factored translation models allow the inclusion of supertags as a factor in the source or target language. We show that this results in an improvement in the quality of translation and that the value of syntactic supertags in flat structured phrase-based models is largely due to better local reorderings. 1

Alexandra Birch; Miles Osborne

2007-01-01T23:59:59.000Z

272

Agile Machining and Inspection Non-Nuclear Report (NNR) Project  

SciTech Connect

This report is a high level summary of the eight major projects funded by the Agile Machining and Inspection Non-Nuclear Readiness (NNR) project (FY06.0422.3.04.R1). The largest project of the group is the Rapid Response project in which the six major sub categories are summarized. This project focused on the operations of the machining departments that will comprise Special Applications Machining (SAM) in the Kansas City Responsive Infrastructure Manufacturing & Sourcing (KCRIMS) project. This project was aimed at upgrading older machine tools, developing new inspection tools, eliminating Classified Removable Electronic Media (CREM) in the handling of classified Numerical Control (NC) programs by installing the CRONOS network, and developing methods to automatically load Coordinated-Measuring Machine (CMM) inspection data into bomb books and product score cards. Finally, the project personnel leaned perations of some of the machine tool cells, and now have the model to continue this activity.

Lazarus, Lloyd

2009-02-19T23:59:59.000Z

273

Energy Cost Calculator for Commercial Ice Machines | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Ice Machines Ice Machines Energy Cost Calculator for Commercial Ice Machines October 8, 2013 - 2:25pm Addthis Vary capacity size, energy cost, hours of operation, and /or efficiency level. INPUT SECTION Input the following data (if any parameter is missing, calculator will set to default value). Defaults Type of Ice Cube Machine Ice Making Head Self-Contained Remote Condensing Unit Ice Making Head Type of Condenser Air Cooled Water Cooled Air Cooled Ice Harvest Rate (lbs. ice per 24 hrs.) lbs. per 24 hrs. 500 lbs. per 24 hrs. Energy Consumption (per 100 lbs. of ice) kWh 5.5 kWh Quantity of ice machines to be purchased 1 Energy Cost $/kWh 0.06 $/kWh Annual Hours of Operation hrs. 3000 hrs. Calculate Reset OUTPUT SECTION Performance per Ice Cube Machine Your

274

International Journal of Machine Tools & Manufacture 47 (2007) 22732281 Near dry electrical discharge machining  

E-Print Network (OSTI)

discharge machining C.C. Kao, Jia Tao, Albert J. ShihÃ? Mechanical Engineering, University of Michigan, Ann. The dielectric strength, defined as the maximum electric field strength that the dielectric fluid can withstand and kerosene-based oil are two commonly used dielectric fluids in conventional wet EDM. Dry EDM uses gas

Shih, Albert J.

275

Multi-winding Homopolar Electric Machine Offers Variable Voltage ...  

Wind Energy Industrial Technologies Multi-winding Homopolar Electric Machine Offers Variable Voltage at Low Rotational Speed Oak Ridge National Laboratory. Contact ...

276

Combined Electric Machine and Current Source Inverter Drive System ...  

Wind power generators ; Industrial power generators; More Information John S. Hsu. Combined Electric Machine and Current Source Invertor Drive System, U.S ...

277

Electrical machines and assemblies including a yokeless stator ...  

Wind Energy; Partners (27) Visual Patent Search; Success Stories; News; Events; Electrical machines and assemblies including a yokeless stator with modular lamination ...

278

DOE - Office of Legacy Management -- Cincinnati Milling and Machining...  

NLE Websites -- All DOE Office Websites (Extended Search)

& Machining Co. (OH.25 ) Eliminated from consideration under FUSRAP - Referred to NRC Designated Name: Not Designated Alternate Name: None Location: Cincinnati , Ohio...

279

Livermore installs big data machine | National Nuclear Security...  

National Nuclear Security Administration (NNSA)

installs big data machine | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response...

280

Parallel machine scheduling with nested job assignment restrictions  

Science Conference Proceedings (OSTI)

We derive a polynomial time approximation scheme for a special case of makespan minimization on unrelated machines. Keywords: Approximation algorithms, Restricted assignment, Scheduling

Gabriella Muratore; Ulrich M. Schwarz; Gerhard J. Woeginger

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "goldberg machine contest" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

KCP relocates 18-ton machine | National Nuclear Security Administratio...  

NLE Websites -- All DOE Office Websites (Extended Search)

relocates 18-ton machine | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response...

282

A Column Generation Approach for Support Vector Machines  

E-Print Network (OSTI)

Mar 23, 2006 ... For instance, taking the Wisconsin Breast Cancer Database from the UCI Machine ..... European Journal of Operational Research. In press.

283

John Hsu, Oak Ridge National Laboratory, Flux Coupling Machines...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

John Hsu, Oak Ridge National Laboratory, Flux Coupling Machines and Switched Reluctance Motors to Replace Permanent Magnets in Electric Vehicles John Hsu, Oak Ridge National...

284

Hybrid-secondary uncluttered permanent magnet machine and ...  

An electric machine (40) has a stator (43), a permanent magnet rotor (38) with permanent magnets (39) and a magnetic coupling uncluttered rotor (46) for inducing a ...

285

Vending Machine Energy Consumption and VendingMiser Evaluation  

E-Print Network (OSTI)

As an effort to decrease the amount of non-critical energy used on the Texas A&M campus, and to assist Dixie Narco in evaluating the efficiency of their vending machines, the Texas A&M Energy Systems Laboratory investigated the power consumption of soda vending machines on the Texas A&M campus. Several vending machines were evaluated to determine the power consumption for the individual components, and the whole machine. Recommendations were made from the results. The VendingMiser device was also tested to evaluate the potential energy savings of this device.

Ritter, J.; Hugghins, J.

2000-01-01T23:59:59.000Z

286

Sandia gives Japanese elected official a tour of Z machine |...  

National Nuclear Security Administration (NNSA)

gives Japanese elected official a tour of Z machine | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy...

287

Hybrid MPI/OpenMP parallel support vector machine training  

E-Print Network (OSTI)

Jan 12, 2009 ... A parallel implementation of Support Vector Machine training has been developed, using a combination of MPI and OpenMP. Using an interior ...

288

Exploiting separability in large-scale Support Vector Machine training  

E-Print Network (OSTI)

Aug 8, 2007 ... Abstract: Linear support vector machine training can be represented as a large quadratic program. We present an efficient and numerically ...

289

Edge diagnostics for tandem mirror machines  

SciTech Connect

The edge plasma in a tandem mirror machine shields the plasma core from cold neutral gas and impurities. A variety of diagnostics are used to measure the fueling, shielding, and confinement of the edge plasma in both the end plug and central cell regions. Fast ion gauges and residual gas analyzers measure the gas pressure and composition outside of the plasma. An array of Langmuir probes is used to measure the electron density and temperature. Extreme ultraviolet (euv) and visible spectroscopy are used to measure both the impurity and deuterium densities and to estimate the shielding factor for the core plasma. The linear geometry of a tandem mirror also allows direct measurements of the edge plasma by sampling the ions and electrons lost but the ends of the machine. Representative data obtained by these diagnostics during operation of the Tandem Mirror Experiment (TMX) and Tandem Mirror Experiment-Upgrade (TMX-U) experiments are presented. Diagnostics that are currently being developed to diagnose the edge plasma are also discussed.

Allen, S.L.

1984-09-14T23:59:59.000Z

290

Evaluation of machining dispersions for turning process  

E-Print Network (OSTI)

In this article we propose to extend the model of simulation of dispersions in turning based on the geometrical specifications. Our study is articulated around two trends of development: the first trend relates to the geometrical model. The geometrical model suggested must allow a follow-up of the geometry of the part during the simulation of machining. It is thus a question of carrying out a systematic treatment of the whole dimensioning and tolerancing process while being based on the principles of the \\DeltaL method. We also planned to integrate this type of specification in the model of simulation of machining suggested. It is more generally a question of extending the traditional model for better taking into account the multi axis specification of coaxiality and perpendicularity on the turned workpieces. The second trend of our study relates to the widening of the field of application of the model. We propose to extend the field of application of the model by taking into account the modifications of several parameters of the manufacturing process plans, likely to involve variations of dispersions.

Arnaud Lefebvre; Valery Wolff

2008-03-03T23:59:59.000Z

291

Automatic tool path generation for finish machining  

SciTech Connect

A system for automatic tool path generation was developed at Sandia National Laboratories for finish machining operations. The system consists of a commercially available 5-axis milling machine controlled by Sandia developed software. This system was used to remove overspray on cast turbine blades. A laser-based, structured-light sensor, mounted on a tool holder, is used to collect 3D data points around the surface of the turbine blade. Using the digitized model of the blade, a tool path is generated which will drive a 0.375 inch diameter CBN grinding pin around the tip of the blade. A fuzzified digital filter was developed to properly eliminate false sensor readings caused by burrs, holes and overspray. The digital filter was found to successfully generate the correct tool path for a blade with intentionally scanned holes and defects. The fuzzified filter improved the computation efficiency by a factor of 25. For application to general parts, an adaptive scanning algorithm was developed and presented with simulation results. A right pyramid and an ellipsoid were scanned successfully with the adaptive algorithm.

Kwok, Kwan S.; Loucks, C.S.; Driessen, B.J.

1997-03-01T23:59:59.000Z

292

CABS: Green Energy for Our Nation's Future (A "Life at the Frontiers of Energy Research" contest entry from the 2011 Energy Frontier Research Centers (EFRCs) Summit and Forum)  

DOE Green Energy (OSTI)

'CABS: Green Energy for our Nation's Future' was submitted by the Center for Advanced Biofuel Systems (CABS) to the 'Life at the Frontiers of Energy Research' video contest at the 2011 Science for Our Nation's Energy Future: Energy Frontier Research Centers (EFRCs) Summit and Forum. Twenty-six EFRCs created short videos to highlight their mission and their work. CABS, an EFRC directed by Jan Jaworski at the Donald Danforth Plant Science Center is a partnership of scientists from five institutions: Donald Danforth Plant Science Center (lead), Michigan State University, the University of Nebraska, New Mexico Consortium/LANL, and Washington State University. The Office of Basic Energy Sciences in the U.S. Department of Energy's Office of Science established the 46 Energy Frontier Research Centers (EFRCs) in 2009. These collaboratively-organized centers conduct fundamental research focused on 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The overall purpose is to accelerate scientific progress toward meeting the nation's critical energy challenges.

Jan Jaworski (Director, Center for Advanced Biofuel Systems); Sayre, Richard T. (previous Director); CABS Staff

2011-05-01T23:59:59.000Z

293

Inverse Design: Playing "Jeopardy" in Materials Science (A "Life at the Frontiers of Energy Research" contest entry from the 2011 Energy Frontier Research Centers (EFRCs) Summit and Forum)  

DOE Green Energy (OSTI)

'Inverse Design: Playing 'Jeopardy' in Materials Science' was submitted by the Center for Inverse Design (CID) to the 'Life at the Frontiers of Energy Research' video contest at the 2011 Science for Our Nation's Energy Future: Energy Frontier Research Centers (EFRCs) Summit and Forum. Twenty-six EFRCs created short videos to highlight their mission and their work. CID, an EFRC directed by Bill Tumas at the National Renewable Energy Laboratory is a partnership of scientists from five institutions: NREL (lead), Northwestern University, University of Colorado, Stanford University, and Oregon State University. The Office of Basic Energy Sciences in the U.S. Department of Energy's Office of Science established the 46 Energy Frontier Research Centers (EFRCs) in 2009. These collaboratively-organized centers conduct fundamental research focused on 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The overall purpose is to accelerate scientific progress toward meeting the nation's critical energy challenges. The mission of the Center for Inverse Design is 'to replace trial-and-error methods used in the development of materials for solar energy conversion with an inverse design approach powered by theory and computation.' Research topics are: solar photovoltaic, photonic, metamaterial, defects, spin dynamics, matter by design, novel materials synthesis, and defect tolerant materials.

Alex Zunger (former Director, Center for Inverse Design); Tumas, Bill (Director, Center for Inverse Design); CID Staff

2011-05-01T23:59:59.000Z

294

Heart of the Solution - Energy Frontiers (A "Life at the Frontiers of Energy Research" contest entry from the 2011 Energy Frontier Research Centers (EFRCs) Summit and Forum)  

DOE Green Energy (OSTI)

'Heart of the Solution - Energy Frontiers' was submitted by the Center for Solar and Thermal Energy Conversion (CSTEC) to the 'Life at the Frontiers of Energy Research' video contest at the 2011 Science for Our Nation's Energy Future: Energy Frontier Research Centers (EFRCs) Summit and Forum. Twenty-six EFRCs created short videos to highlight their mission and their work. This video was both the People's Choice Award winner and selected as one of five winners by a distinguished panel of judges for its 'exemplary explanation of the role of an Energy Frontier Research Center'. The Center for Solar and Thermal Energy Conversion is directed by Peter F. Green at the University of Michigan. The Office of Basic Energy Sciences in the U.S. Department of Energy's Office of Science established the 46 Energy Frontier Research Centers (EFRCs) in 2009. These collaboratively-organized centers conduct fundamental research focused on 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The overall purpose is to accelerate scientific progress toward meeting the nation's critical energy challenges. The mission of the Center for Solar and Thermal Energy Conversion is 'to study complex material structures on the nanoscale to identify key features for their potential use as materials to convert solar energy and heat to electricity.' Research topics are: solar photovoltaic, photonic, optics, solar thermal, thermoelectric, phonons, thermal conductivity, solar electrodes, defects, ultrafast physics, interfacial characterization, matter by design, novel materials synthesis, charge transport, and self-assembly.

Green, Peter F. (Director, Center for Solar and Thermal Energy Conversion, University of Michigan); CSTEC Staff

2011-05-01T23:59:59.000Z

295

Battle against Phonons (A "Life at the Frontiers of Energy Research" contest entry from the 2011 Energy Frontier Research Centers (EFRCs) Summit and Forum  

DOE Green Energy (OSTI)

'Battle against Phonons' was submitted by the Solid-State Solar-Thermal Energy Conversion (S3TEC) EFRC to the 'Life at the Frontiers of Energy Research' video contest at the 2011 Science for Our Nation's Energy Future: Energy Frontier Research Centers (EFRCs) Summit and Forum. Twenty-six EFRCs created short videos to highlight their mission and their work. This video was selected as one of five winners by a distinguished panel of judges for the special award, 'Best with Popcorn'. S3TEC, an EFRC directed by Gang Chen at the Massachusetts Institute of Technology is a partnership of scientists from four research institutions: MIT (lead), Oak Ridge National Laboratory, Boston College, and Rensselaer Polytechnic Institute. The Office of Basic Energy Sciences in the U.S. Department of Energy's Office of Science established the 46 Energy Frontier Research Centers (EFRCs) in 2009. These collaboratively-organized centers conduct fundamental research focused on 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The overall purpose is to accelerate scientific progress toward meeting the nation's critical energy challenges. The mission of the Solid-State Solar Thermal Energy Conversion Center is 'to create novel, solid-state materials for the conversion of sunlight into electricity using thermal and photovoltaic processes.' Research topics are: solar photovoltaic, photonic, metamaterial, optics, solar thermal, thermoelectric, phonons, thermal conductivity, defects, ultrafast physics, interfacial characterization, matter by design, novel materials synthesis, charge transport, defect tolerant materials, and scalable processing.

Chen, Gang (Director, Solid-State Solar-Thermal Energy Conversion Center); S3TEC Staff

2011-05-01T23:59:59.000Z

296

UNC EFRC: Fuels from Sunlight (A "Life at the Frontiers of Energy Research" contest entry from the 2011 Energy Frontier Research Centers (EFRCs) Summit and Forum)  

DOE Green Energy (OSTI)

'Fuels from Sunlight' was submitted by the University of North Carolina (UNC) EFRC: Solar Fuels and Next Generation Photovoltaics to the 'Life at the Frontiers of Energy Research' video contest at the 2011 Science for Our Nation's Energy Future: Energy Frontier Research Centers (EFRCs) Summit and Forum. Twenty-six EFRCs created short videos to highlight their mission and their work. The UNC EFRC directed by Thomas J. Meyer is a partnership of scientists from six institutions: UNC (lead), Duke University, University of Florida, North Caroline Central University, North Carolina State University, and the Research Triangle Institute. The Office of Basic Energy Sciences in the U.S. Department of Energy's Office of Science established the 46 Energy Frontier Research Centers (EFRCs) in 2009. These collaboratively-organized centers conduct fundamental research focused on 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The overall purpose is to accelerate scientific progress toward meeting the nation's critical energy challenges. The mission of Solar Fuels and Next Generation Photovoltaics is 'to combine the best features of academic and translational research to study light/matter interactions and chemical processes for the efficient collection, transfer, and conversion of solar energy into chemical fuels and electricity.' Research topics are: catalysis (CO{sub 2}, hydrocarbons, water), electrocatalysis, photocatalysis, photoelectrocatalysis, solar photovoltaic, solar fuels, photonic, solar electrodes, photosynthesis, fuel cells, CO{sub 2} (convert), greenhosue gas, hydrogen (fuel), interfacial characterization, novel materials synthesis, charge transport, and self-assembly.

Meyer, Thomas J. (Director, UNC EFRC: Solar Fuels and Next Generation Photovoltaics); UNC EFRC Staff

2011-05-01T23:59:59.000Z

297

Enabling Energy Efficiency (A "Life at the Frontiers of Energy Research" contest entry from the 2011 Energy Frontier Research Centers (EFRCs) Summit and Forum)  

DOE Green Energy (OSTI)

'Enabling Energy Efficiency' was submitted by the EFRC for Solid-State Lighting Science (SSLS) to the 'Life at the Frontiers of Energy Research' video contest at the 2011 Science for Our Nation's Energy Future: Energy Frontier Research Centers (EFRCs) Summit and Forum. Twenty-six EFRCs created short videos to highlight their mission and their work. SSLS is directed by Mike Coltrin (Acting) and Jerry Simmons at Sandia National Laboratories, and is a partnership of scientists from eight institutions: Sandia National Laboratories (lead); California Institute of Technology; Los Alamos National Laboratory; University of Massachusetts, Lowell; University of New Mexico; Northwestern University; Philips Lumileds Lighting; and Rensselaer Polytechnic Institute. The Office of Basic Energy Sciences in the U.S. Department of Energy's Office of Science established the 46 Energy Frontier Research Centers (EFRCs) in 2009. These collaboratively-organized centers conduct fundamental research focused on 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The overall purpose is to accelerate scientific progress toward meeting the nation's critical energy challenges.

Coltrin, Mike (Acting Director, EFRC for Solid State Lighting Science); Simmons, Jerry; SSLS Staff

2011-05-01T23:59:59.000Z

298

Liquid Sunshine to Fuel Your Car (A "Life at the Frontiers of Energy Research" contest entry from the 2011 Energy Frontier Research Centers (EFRCs) Summit and Forum)  

DOE Green Energy (OSTI)

'Liquid Sunshine to Fuel Your Car' was submitted by the Center for Lignocellulose Structure and Formation (CLSF) to the 'Life at the Frontiers of Energy Research' video contest at the 2011 Science for Our Nation's Energy Future: Energy Frontier Research Centers (EFRCs) Summit and Forum. Twenty-six EFRCs created short videos to highlight their mission and their work. CLSF is directed by Daniel Cosgrove at Pennsylvania State University and is a partnership of scientists from three institutions: Penn State (lead), North Caroline State University, and Virginia Tech University. The Office of Basic Energy Sciences in the U.S. Department of Energy's Office of Science established the 46 Energy Frontier Research Centers (EFRCs) in 2009. These collaboratively-organized centers conduct fundamental research focused on 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The overall purpose is to accelerate scientific progress toward meeting the nation's critical energy challenges. The mission of the Center for Lignocellulose Structure and Formation is 'to dramatically increase our fundamental knowledge of the formation and physical interactions of bio-polymer networks in plant cell walls to provide a basis for improved methods for converting biomass into fuels.' Research topics are: biofuels (biomass), membrane, interfacial characterization, matter by design, and self-assembly.

Cosgrove, Daniel (Director, Center for Lignocellulose Structure and Formation); CLSF Staff

2011-05-01T23:59:59.000Z

299

Saving the Sun for a Rainy Day (A "Life at the Frontiers of Energy Research" contest entry from the 2011 Energy Frontier Research Centers (EFRCs) Summit and Forum)  

DOE Green Energy (OSTI)

'Saving the Sun for a Rainy Day' was submitted by the Center for Molecular Electrocatalysis (CME) to the 'Life at the Frontiers of Energy Research' video contest at the 2011 Science for Our Nation's Energy Future: Energy Frontier Research Centers (EFRCs) Summit and Forum. Twenty-six EFRCs created short videos to highlight their mission and their work. CME, an EFRC directed by R. Morris Bullock at Pacific Northwest National Laboratory is a partnership of scientists from four institutions: PNNL (lead), Pensylvania State University, University of Washington, and the University of Wyoming. The Office of Basic Energy Sciences in the U.S. Department of Energy's Office of Science established the 46 Energy Frontier Research Centers (EFRCs) in 2009. These collaboratively-organized centers conduct fundamental research focused on 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The overall purpose is to accelerate scientific progress toward meeting the nation's critical energy challenges. The mission of the Center for Molecular Electrocatalysis is 'to understand, design and develop molecular electrocatalysts for solar fuel production and use.' Research topics are: catalysis (water), electrocatalysis, bio-inspired, electrical energy storage, fuel cells, hydrogen (fuel), matter by design, novel materials synthesis, and charge transport.

Bullock, R. Morris (Director, Center for Molecular Electrocatalysis); CME Staff

2011-05-01T23:59:59.000Z

300

Excited About Excitons (A "Life at the Frontiers of Energy Research" contest entry from the 2011 Energy Frontier Research Centers (EFRCs) Summit and Forum)  

DOE Green Energy (OSTI)

'Excited about Excitons' was submitted by the Center for Excitonics to the 'Life at the Frontiers of Energy Research' video contest at the 2011 Science for Our Nation's Energy Future: Energy Frontier Research Centers (EFRCs) Summit and Forum. Twenty-six EFRCs created short videos to highlight their mission and their work. This video was selected as one of five winners by a distinguished panel of judges for its 'outstanding portrayal of young scientists'. The Center for Excitonics, an EFRC directed by Marc Baldo at the Massachusetts Institute of Technology (MIT) is a partnership of scientists from three institutions: MIT (lead), Brookhaven National Laboratory, and Harvard University. The Office of Basic Energy Sciences in the U.S. Department of Energy's Office of Science established the 46 Energy Frontier Research Centers (EFRCs) in 2009. These collaboratively-organized centers conduct fundamental research focused on 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The overall purpose is to accelerate scientific progress toward meeting the nation's critical energy challenges. The mission of the Center for Excitonics is 'to understand the transport of charge carriers in synthetic disordered systems, which hold promise as new materials for conversion of solar energy to electricity and electrical energy storage.' Research topics are: solar photovoltaic, photonic, solid state lighting, photosynthesis, novel materials synthesis, charge transport, defect tolerant materials, scalable processing, and self-assembly.

Baldo, Marc (Director, Center for Excitonics); Center for Excitonics Staff

2011-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "goldberg machine contest" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Search for the ANSER (A "Life at the Frontiers of Energy Research" contest entry from the 2011 Energy Frontier Research Centers (EFRCs) Summit and Forum  

DOE Green Energy (OSTI)

'Search for the ANSER' was submitted by the Argonne-Northwestern Solar Energy Research Center (ANSER) to the 'Life at the Frontiers of Energy Research' video contest at the 2011 Science for Our Nation's Energy Future: Energy Frontier Research Centers (EFRCs) Summit and Forum. Twenty-six EFRCs created short videos to highlight their mission and their work. ANSER, an EFRC directed by Michael Wasielewski at Argonne National Laboratory is a partnership of scientists from five institutions: Argonne National Laboratory, Northwestern University, University of Chicago, University of Illinois at Urbana-Champaign, and Yale. The Office of Basic Energy Sciences in the U.S. Department of Energy's Office of Science established the 46 Energy Frontier Research Centers (EFRCs) in 2009. These collaboratively-organized centers conduct fundamental research focused on 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The overall purpose is to accelerate scientific progress toward meeting the nation's critical energy challenges. At ANSER, the mission is 'to revolutionize our understanding of molecules, materials and methods necessary to create dramatically more efficient technologies for solar fuels and electricity production.' Research topics are: catalysis (water), electrocatalysis, photocatalysis, photoelectrocatalysis, solar photovoltaic, solar fuels, solar electrodes, photosynthesis, transportation fuels, bio-inspired, spin dynamics, hydrogen (fuel), ultrafast physics, interfacial characterization, matter by design, novel materials synthesis, charge transport, and self-assembly.

Wasielewski, Michael R. (Director, Argonne-Northwestern Solar Energy Research Center); ANSER Staff

2011-05-01T23:59:59.000Z

302

Optimisation of machining processes design for Stellite 6, a wear resistant and difficult-to-machine material.  

E-Print Network (OSTI)

??"The research work in this thesis involves a series of physical experiments and theoretical investigations for machining of Stellite 6 using PCBN (Polycrystalline Cubic Boron… (more)

Hasan, Md Shahanur.

2011-01-01T23:59:59.000Z

303

Interpolator for numerically controlled machine tools  

DOE Patents (OSTI)

A digital differential analyzer circuit is provided that depending on the embodiment chosen can carry out linear, parabolic, circular or cubic interpolation. In the embodiment for parabolic interpolations, the circuit provides pulse trains for the X and Y slide motors of a two-axis machine to effect tool motion along a parabolic path. The pulse trains are generated by the circuit in such a way that parabolic tool motion is obtained from information contained in only one block of binary input data. A part contour may be approximated by one or more parabolic arcs. Acceleration and initial velocity values from a data block are set in fixed bit size registers for each axis separately but simultaneously and the values are integrated to obtain the movement along the respective axis as a function of time. Integration is performed by continual addition at a specified rate of an integrand value stored in one register to the remainder temporarily stored in another identical size register. Overflows from the addition process are indicative of the integral. The overflow output pulses from the second integration may be applied to motors which position the respective machine slides according to a parabolic motion in time to produce a parabolic machine tool motion in space. An additional register for each axis is provided in the circuit to allow "floating" of the radix points of the integrand registers and the velocity increment to improve position accuracy and to reduce errors encountered when the acceleration integrand magnitudes are small when compared to the velocity integrands. A divider circuit is provided in the output of the circuit to smooth the output pulse spacing and prevent motor stall, because the overflow pulses produced in the binary addition process are spaced unevenly in time. The divider has the effect of passing only every nth motor drive pulse, with n being specifiable. The circuit inputs (integrands, rates, etc.) are scaled to give exactly n times the desired number of pulses out, in order to compensate for the divider.

Bowers, Gary L. (Clinton, TN); Davenport, Clyde M. (Oak Ridge, TN); Stephens, Albert E. (Knoxville, TN)

1976-01-01T23:59:59.000Z

304

Technology: Machine and its interpretation in architecture  

E-Print Network (OSTI)

The objective of this study is to develop a comprehensive theory for the relationship between architecture and technology and to examine the interpretation of technology when it is applied to architecture. In architecture, 'art and craft' and 'doing and saying (presentation)' are closely interwoven. It is sensitive to the external environment in nature, and its boundary has been actively changed. The nineteenth century brought the sudden alteration of culture with the collaboration between science and its applied means or knowledge - "technology". Subsequently, in the twentieth century, the new culture has transformed our normal life style and we can perceive the development of civilization sensuously. The machine as a product of industrial civilization and the symbol of technology has generated new meanings and tradition in tune with this historical trend. Therefore, this study will center on the concept 'technology', which is one of the conspicuous factors in the formation of modern architecture, and it will investigate the relationship between technology and architecture.

Kim, Ju Hong

2002-01-01T23:59:59.000Z

305

Applying Alpha-Channeling to Mirror Machines  

SciTech Connect

The ?-channeling effect entails the use of radio-frequency waves to expel and cool high-energetic ?- particles born in a fusion reactor; the device reactivity can then be increased even further by redirecting the extracted energy to fuel ions. Originally proposed for tokamaks, this technique has also been shown to benefi t open-ended fusion devices. Here, the fundamental theory and practical aspects of ?- channeling in mirror machines are reviewed, including the influence of magnetic field inhomogeneity and the effect of a finite wave region on the ?-channeling mechanism. For practical implementation of the ? -channeling effect in mirror geometry, suitable contained weakly-damped modes are identifi ed. In addition, the parameter space of candidate waves for implementing the ? -channeling effect can be signi cantly extended through the introduction of a suitable minority ion species that has the catalytic effect of moderating the transfer of power from the ?-channeling wave to the fuel ions.

A.I. Zhmoginov and N.J. Fisch

2012-03-16T23:59:59.000Z

306

Design studies of mirror machine reactors  

SciTech Connect

An overview is presented of a mirror fusion reactor design study. The general methodology used in the study is discussed, the reactor is described, and some design alternatives to the present approach are enumerated. The system chosen for this design study is a mirror machine with direct conversion using D- T fuel. The nominal power output is 200 MW. The coil geometry is the Yin Yang, minimum B with a vacuum mirror ratio of 3. The coil is of particular utility because of its simple conductor shapes and because the two separate conductors, by proper B-field biasing, allow the charged particles to escape preferentially through one mirror only and through a relatively small window'' of that mirror. This is necessary for direct converter economy. (auth)

Werner, R.W.; Carlson, G.A.; Hovingh, J.; Lee, J.D.; Peterson, M.A.

1973-12-01T23:59:59.000Z

307

Energy Efficient Allocation of Virtual Machines in Cloud Data Centers  

Science Conference Proceedings (OSTI)

Rapid growth of the demand for computational power has led to the creation of large-scale data centers. They consume enormous amounts of electrical power resulting in high operational costs and carbon dioxide emissions. Moreover, modern Cloud computing ... Keywords: Energy efficiency, Cloud computing, Energy consumption, Green IT, Resource management, Virtualization, Allocation of virtual machines, Live migration of virtual machines

Anton Beloglazov; Rajkumar Buyya

2010-05-01T23:59:59.000Z

308

Brain-controlled finite state machine for wheelchair navigation  

Science Conference Proceedings (OSTI)

This proposal is about a brain-controlled electrically powered wheelchair. The system comprises a brain-computer interface based on steady-state visual evoked potentials and a processing unit relying on a finite state machine (FSM). Results of first ... Keywords: brain-computer interface (bci), finite state machine (fsm), human-computer interaction, stea dy-state visual evoked potentials (ssvep)

Amir Teymourian; Thorsten Lueth; Axel Graeser; Torsten Felzer; Rainer Nordmann

2008-10-01T23:59:59.000Z

309

Synthesizing hierarchical state machines from expressive scenario descriptions  

Science Conference Proceedings (OSTI)

There are many examples in the literature of algorithms for synthesizing state machines from scenario-based models. The motivation for these is to automate the transition from scenario-based requirements to early behavioral design models. To date, however, ... Keywords: State machine synthesis, interaction overview diagrams, scenario-based requirements, software modeling

Jon Whittle; Praveen K. Jayaraman

2010-01-01T23:59:59.000Z

310

Monthly streamflow forecasting based on improved support vector machine model  

Science Conference Proceedings (OSTI)

To improve the performance of the support vector machine (SVM) model in predicting monthly streamflow, an improved SVM model with adaptive insensitive factor is proposed in this paper. Meanwhile, considering the influence of noise and the disadvantages ... Keywords: Adaptive insensitive factor, Artificial neural network, Chaos and phase-space reconstruction theory, Streamflow forecast, Support vector machine, Wavelet

Jun Guo; Jianzhong Zhou; Hui Qin; Qiang Zou; Qingqing Li

2011-09-01T23:59:59.000Z

311

Terminal models for switching overvoltage studies in electrical machines  

Science Conference Proceedings (OSTI)

In this paper, terminal models for high voltage machine windings are developed. The models are useful for simulating transient overvoltages due to switching operations on industrial installations. The models are based on network synthesis of the winding ... Keywords: electrical parameters, machine winding, network synthesis, switching transients, terminal impedance

J. L. Guardado; V. Venegas; E. Melgoza

2006-03-01T23:59:59.000Z

312

Fatigue crack growth estimation by relevance vector machine  

Science Conference Proceedings (OSTI)

The investigation of damage propagation mechanisms on a selected safety-critical component or structure requires the quantification of its remaining useful life (RUL) to verify until when it can continue performing the required function. In this work, ... Keywords: Bayesian techniques, Fatigue crack growth, Prognostics, Relevance vector machine, Residual useful life, Support vector machine

Enrico Zio; Francesco Di Maio

2012-09-01T23:59:59.000Z

313

Advanced support vector machines for 802.11 indoor location  

Science Conference Proceedings (OSTI)

Due to the proliferation of ubiquitous computing services, locating a device in indoor scenarios has received special attention during recent years. A variety of algorithms are based on Wi-Fi measurements of the received signal strength and estimate ... Keywords: Autocorrelation kernel, Complex support vector machines, Fingerprinting, IEEE 802.11, Indoor location, Support vector machines

Carlos Figuera; José Luis Rojo-Álvarez; Mark Wilby; Inmaculada Mora-Jiménez; Antonio J. Caamaño

2012-09-01T23:59:59.000Z

314

Grading of construction aggregate through machine vision: Results and prospects  

Science Conference Proceedings (OSTI)

Traditionally, crushed aggregate to be used in construction is graded using sieves. We describe an innovative machine vision approach to such grading. Our operational scenario is one where a camera takes images from directly overhead of a layer of aggregate ... Keywords: Construction industry, Image database, Machine vision, Supervised and unsupervised classification, Wavelet transform

Fionn Murtagh; Xiaoyu Qiao; Paul Walsh; P. A. M. Basheer; Danny Crookes; Adrian Long

2005-12-01T23:59:59.000Z

315

Bounded sequence testing from deterministic finite state machines  

Science Conference Proceedings (OSTI)

The W- andWp-methods are the basis for conformance testing from a deterministic finite state machine (DFSM) when the conformance relation considered is equivalence. However, many DFSM applications use only input sequences of limited length. In such cases, ... Keywords: Finite state machines, Specification-based testing, Test selection, W-method, Wp-method

Florentin Ipate

2010-03-01T23:59:59.000Z

316

Milling Machine Replacement Project (4587), 5/11/2012  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Milling Machine Replacement Projects (4587) Milling Machine Replacement Projects (4587) Program or Field Office: Y-12 Site Office Location(s) (City/County/State): Oak Ridge, Anderson County, Tennessee Proposed Action Description: Submit by E-mail The proposed action is to replace two large milling machines with two new medium sized CNC milling machines. The new machines will be connected to the digital network communication (DNC) system. Categorical Exclusion(s) Applied: 81.31 -Installation or relocation of machinery and equipment For the complete DOE National Environmental Policy Act regulations regarding categorical exclusions, including the full text of each categorical exclusion, see Subpart D of 10 CFR Part 1021. Regulatory Requirements in 10 CFR 1021.410(b): (See full text in regulation)

317

DOE - Office of Legacy Management -- Transcontinental Machine and Tool Co -  

NLE Websites -- All DOE Office Websites (Extended Search)

Transcontinental Machine and Tool Transcontinental Machine and Tool Co - US 06 FUSRAP Considered Sites Site: TRANSCONTINENTAL MACHINE AND TOOL CO. (US.06 ) Eliminated from further consideration under FUSRAP Designated Name: Not Designated Alternate Name: None Location: Unknown US.06-1 Evaluation Year: 1990 US.06-1 Site Operations: Metal Fabrication operations - Machined Uranium slugs in support of Savannah River program for evaluation of Uranium fabrication methods. US.06-1 Site Disposition: Eliminated - Based on similar AEC/MED machine shops' surveys with low potential for contamination - did not exceed DOE guidelines US.06-1 Radioactive Materials Handled: Yes Primary Radioactive Materials Handled: Uranium US.06-1 Radiological Survey(s): None Indicated Site Status: Eliminated from further consideration under FUSRAP

318

Traction sheave elevator, hoisting unit and machine space  

DOE Patents (OSTI)

Traction sheave elevator consisting of an elevator car moving along elevator guide rails, a counterweight moving along counterweight guide rails, a set of hoisting ropes (3) on which the elevator car and counterweight are suspended, and a drive machine unit (6) driving a traction sheave (7) acting on the hoisting ropes (3) and placed in the elevator shaft. The drive machine unit (6) is of a flat construction. A wall of the elevator shaft is provided with a machine space with its open side facing towards the shaft, the essential parts of the drive machine unit (6) being placed in the space. The hoisting unit (9) of the traction sheave elevator consists of a substantially discoidal drive machine unit (6) and an instrument panel (8) mounted on the frame (20) of the hoisting unit.

Hakala, Harri (Hyvinkaa, FI); Mustalahti, Jorma (Hyvinkaa, FI); Aulanko, Esko (Kerava, FI)

2000-01-01T23:59:59.000Z

319

Hybrid machine maintenance planning systems using case-based reasoning and evolution strategies  

Science Conference Proceedings (OSTI)

Machine failure prediction involves the processing of massive amounts of data, expert's knowledge of various types of machines, problems of noisy data and operation variability. The chief advantages of effective machine failure prediction are that it ...

Kan Yuen Sin / James Liu

2004-01-01T23:59:59.000Z

320

Light Matters (A "Life at the Frontiers of Energy Research" contest entry from the 2011 Energy Frontier Research Centers (EFRCs) Summit and Forum)  

DOE Green Energy (OSTI)

'Light Matters' was submitted by the Center for Light-Material Interactions in Energy Conversion (LMI) to the 'Life at the Frontiers of Energy Research' video contest at the 2011 Science for Our Nation's Energy Future: Energy Frontier Research Centers (EFRCs) Summit and Forum. Twenty-six EFRCs created short videos to highlight their mission and their work. This video was selected as one of five winners by a distinguished panel of judges for its 'striking photography and visual impact'. LMI, an EFRC directed by Harry Atwater at the California Institute of Technology is a partnership of scientists from three institutions: CalTech (lead), University of California, Berkeley, and the University of Illinois at Urbana-Champaign. The Office of Basic Energy Sciences in the U.S. Department of Energy's Office of Science established the 46 Energy Frontier Research Centers (EFRCs) in 2009. These collaboratively-organized centers conduct fundamental research focused on 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The overall purpose is to accelerate scientific progress toward meeting the nation's critical energy challenges. The mission of Light-Material Interactions in Energy Conversion is 'to tailor the morphology, complex dielectric structure, and electronic properties of matter to sculpt the flow of sunlight, enabling light conversion to electrical and chemical energy with unprecedented efficiency.' Research topics are: catalysis (imines hydrocarbons), solar photovoltaic, solar fuels, photonic, solid state lighting, metamaterial, optics, phonons, thermal conductivity, solar electrodes, photsynthesis, CO{sub 2} (convert), greenhouse gas, and matter by design.

Atwater, Harry (Director, Light-Material Interactions in Energy Conversion (LMI), California Institute of Technology); LMI Staff

2011-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "goldberg machine contest" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Carbon in Underland (A "Life at the Frontiers of Energy Research" contest entry from the 2011 Energy Frontier Research Centers (EFRCs) Summit and Forum  

SciTech Connect

'Carbon in Underland' was submitted by the Center for Nanoscale Control of Geologic CO2 (NCGC) to the 'Life at the Frontiers of Energy Research' video contest at the 2011 Science for Our Nation's Energy Future: Energy Frontier Research Centers (EFRCs) Summit and Forum. Twenty-six EFRCs created short videos to highlight their mission and their work. This video was selected as one of five winners by a distinguished panel of judges for its 'entertaining animation and engaging explanations of carbon sequestration'. NCGC, an EFRC directed by Donald J. DePaolo at Lawrence Berkeley National Laboratory is a partnership of scientists from seven institutions: LBNL (lead) Massachusetts Institute of Technology, Lawrence Livermore National Laboratory, Oak Ridge National Laboratory, University of California, Davis, Ohio State University, and Washington University in St. Louis. The Office of Basic Energy Sciences in the U.S. Department of Energy's Office of Science established the 46 Energy Frontier Research Centers (EFRCs) in 2009. These collaboratively-organized centers conduct fundamental research focused on 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The overall purpose is to accelerate scientific progress toward meeting the nation's critical energy challenges. The mission of the Center for Nanoscale Control of Geologic CO{sub 2} is 'to use new investigative tools, combined with experiments and computer simulations, to build a fundamental understanding of molecular-to-pore-scale processes in fluid-rock systems, and to demonstrate the ability to control critical aspects of flow, transport, and mineralization in porous rock media as applied to geologic sequestration of CO{sub 2}. Research topics are: bio-inspired, CO{sub 2} (store), greenhouse gas, and interfacial characterization.

DePaolo, Donald J. (Director, Center for Nanoscale Control of Geologic CO2); NCGC Staff

2011-05-01T23:59:59.000Z

322

Energy Consumption Characterization and Reduction Strategies for Milling Machine Tool Use  

E-Print Network (OSTI)

Cutting Condition on Power Consumption of Machine Tools, in:Energy Consumption Characterization and Reduction Strategiesand reducing the energy consumption of milling machine tools

Diaz, Nancy; E. Redelsheimer; Dornfeld, David

2011-01-01T23:59:59.000Z

323

Energy Consumption Characterization and Reduction Strategies for Milling Machine Tool Use  

E-Print Network (OSTI)

Part Orientation for Face Milling, in: Annals of the CIRP,2010): Environmental Analysis of Milling Machine Tool Use inand Reduction Strategies for Milling Machine Tool Use Nancy

Diaz, Nancy; E. Redelsheimer; Dornfeld, David

2011-01-01T23:59:59.000Z

324

Environmental Analysis of Milling Machine Tool Use in Various Manufacturing Environments  

E-Print Network (OSTI)

Environmental Analysis of Milling Machine Tool Use inHorvath, David Dornfeld Milling is a type of cutting processof a standard vertical milling machine tool. In this

Diaz, Nancy; Helu, Moneer; Jayanathan, Stephen; Chen, Yifen; Horvath, Arpad; Dornfeld, David

2010-01-01T23:59:59.000Z

325

Energy Consumption Characterization and Reduction Strategies for Milling Machine Tool Use  

E-Print Network (OSTI)

Energy Consumption Characterization and Reduction Strategiesand reducing the energy consumption of milling machine toolsGreen Machine Tools; Energy Consumption Reduction; Specific

Diaz, Nancy; E. Redelsheimer; Dornfeld, David

2011-01-01T23:59:59.000Z

326

Water spray ventilator system for continuous mining machines  

DOE Patents (OSTI)

The invention relates to a water spray ventilator system mounted on a continuous mining machine to streamline airflow and provide effective face ventilation of both respirable dust and methane in underground coal mines. This system has two side spray nozzles mounted one on each side of the mining machine and six spray nozzles disposed on a manifold mounted to the underside of the machine boom. The six spray nozzles are angularly and laterally oriented on the manifold so as to provide non-overlapping spray patterns along the length of the cutter drum.

Page, Steven J. (Pittsburgh, PA); Mal, Thomas (Pittsburgh, PA)

1995-01-01T23:59:59.000Z

327

Flotation machine and process for removing impurities from coals  

DOE Patents (OSTI)

The present invention is directed to a type of flotation machine that combines three separate operations in a single unit. The flotation machine is a hydraulic separator that is capable of reducing the pyrite and other mineral matter content of a coal. When the hydraulic separator is used with a flotation system, the pyrite and certain other minerals particles that may have been entrained by hydrodynamic forces associated with conventional flotation machines and/or by the attachment forces associated with the formation of microagglomerates are washed and separated from the coal.

Szymocha, Kazimierz (Edmonton, CA); Ignasiak, Boleslaw (Edmonton, CA); Pawlak, Wanda (Edmonton, CA); Kulik, Conrad (Newark, CA); Lebowitz, Howard E. (Mountain View, CA)

1997-01-01T23:59:59.000Z

328

Flotation machine and process for removing impurities from coals  

DOE Patents (OSTI)

The present invention is directed to a type of flotation machine that combines three separate operations in a single unit. The flotation machine is a hydraulic separator that is capable of reducing the pyrite and other mineral matter content of a coal. When the hydraulic separator is used with a flotation system, the pyrite and certain other minerals particles that may have been entrained by hydrodynamic forces associated with conventional flotation machines and/or by the attachment forces associated with the formation of microagglomerates are washed and separated from the coal.

Szymocha, Kazimierz (Edmonton, CA); Ignasiak, Boleslaw (Edmonton, CA); Pawlak, Wanda (Edmonton, CA); Kulik, Conrad (Newark, CA); Lebowitz, Howard E. (Mountain View, CA)

1995-01-01T23:59:59.000Z

329

System and method for cooling a superconducting rotary machine  

Science Conference Proceedings (OSTI)

A system for cooling a superconducting rotary machine includes a plurality of sealed siphon tubes disposed in balanced locations around a rotor adjacent to a superconducting coil. Each of the sealed siphon tubes includes a tubular body and a heat transfer medium disposed in the tubular body that undergoes a phase change during operation of the machine to extract heat from the superconducting coil. A siphon heat exchanger is thermally coupled to the siphon tubes for extracting heat from the siphon tubes during operation of the machine.

Ackermann, Robert Adolf (Schenectady, NY); Laskaris, Evangelos Trifon (Schenectady, NY); Huang, Xianrui (Clifton Park, NY); Bray, James William (Niskayuna, NY)

2011-08-09T23:59:59.000Z

330

LTC vacuum blasting machine (metal): Baseline report  

SciTech Connect

The LTC coating removal technology was tested and is being evaluated at Florida International University (FIU) as a baseline technology. In conjunction with evaluation of efficiency and cost, this report covers the evaluation conducted for safety and health issues. It is a commercially available technology and has been used for various projects at locations throughout the country. The LTC coating removal system consisted of several hand tools, a Roto Peen scaler, and a needlegun. They are designed to remove coatings from steel, concrete, brick, and wood. These hand tools are used with the LTC PTC-6 vacuum system to capture dust and debris as removal of the coating takes place. The safety and health evaluation during the testing demonstration focused on two main areas of exposure: dust and noise. The dust exposure was minimal but noise exposure was significant. Further testing for each exposure is recommended because of the environment where the testing demonstration took place. It is feasible that the dust and noise levels will be higher in an enclosed operating environment of different construction. In addition, other areas of concern found were arm-hand vibration, whole-body vibration, ergonomics, heat stress, tripping hazards, electrical hazards, machine guarding, and lockout/tagout.

1997-07-31T23:59:59.000Z

331

LTC vacuum blasting machine (concrete): Baseline report  

SciTech Connect

The LTC shot blast technology was tested and is being evaluated at Florida International University (FIU) as a baseline technology. In conjunction with FIU`s evaluation of efficiency and cost, this report covers the evaluation conducted for safety and health issues. It is a commercially available technology and has been used for various projects at locations throughout the country. The LTC 1073 Vacuum Blasting Machine uses a high-capacity, direct-pressure blasting system which incorporates a continuous feed for the blast media. The blast media cleans the surface within the contained brush area of the blast. It incorporates a vacuum system which removes dust and debris from the surface as it is blasted. The safety and health evaluation during the testing demonstration focused on two main areas of exposure: dust and noise. Dust exposure during maintenance activities was minimal, but due to mechanical difficulties dust monitoring could not be conducted during operation. Noise exposure was significant. Further testing for each of these exposures is recommended because of the outdoor environment where the testing demonstration took place. This may cause the results to be inaccurate. It is feasible that the dust and noise levels will be higher in an enclosed environment. In addition, other safety and health issues found were ergonomics, heat stress, tripping hazards, electrical hazards, lockout/tagout, and arm-hand vibration.

1997-07-31T23:59:59.000Z

332

Classification of Images Using Support Vector Machines  

E-Print Network (OSTI)

Support Vector Machines (SVMs) are a relatively new supervised classification technique to the land cover mapping community. They have their roots in Statistical Learning Theory and have gained prominence because they are robust, accurate and are effective even when using a small training sample. By their nature SVMs are essentially binary classifiers, however, they can be adopted to handle the multiple classification tasks common in remote sensing studies. The two approaches commonly used are the One-Against-One (1A1) and One-Against-All (1AA) techniques. In this paper, these approaches are evaluated in as far as their impact and implication for land cover mapping. The main finding from this research is that whereas the 1AA technique is more predisposed to yielding unclassified and mixed pixels, the resulting classification accuracy is not significantly different from 1A1 approach. It is the authors conclusions that ultimately the choice of technique adopted boils down to personal preference and the uniquene...

Anthony, Gidudu; Tshilidzi, Marwala

2007-01-01T23:59:59.000Z

333

Muon Collider Machine-Detector Interface  

SciTech Connect

In order to realize the high physics potential of a Muon Collider (MC) a high luminosity of {mu}{sup +}{mu}{sup -}-collisions at the Interaction Point (IP) in the TeV range must be achieved ({approx}10{sup 34} cm{sup -2}s{sup -1}). To reach this goal, a number of demanding requirements on the collider optics and the IR hardware - arising from the short muon lifetime and from relatively large values of the transverse emittance and momentum spread in muon beams that can realistically be obtained with ionization cooling should be satisfied. These requirements are aggravated by limitations on the quadrupole gradients as well as by the necessity to protect superconducting magnets and collider detectors from muon decay products. The overall detector performance in this domain is strongly dependent on the background particle rates in various sub-detectors. The deleterious effects of the background and radiation environment produced by the beam in the ring are very important issues in the Interaction Region (IR), detector and Machine-Detector Interface (MDI) designs. This report is based on studies presented very recently.

Mokhov, Nikolai V.; /Fermilab

2011-08-01T23:59:59.000Z

334

TENTH WORLD CONGRESS ON THE THEORY OF MACHINES AND MECHANISMS  

E-Print Network (OSTI)

for Intelligent Machines, 817 Sherbrooke W., Montreal, Quebec, H3A 2K6 Canada. email: johnh@cim.mcgill.ca, kourosh@cim.mcgill.ca, angeles@cim.mcgill.ca Keywords: approximate kinematic synthesis, design, structural error, function

Hayes, John

335

A case for high performance computing with virtual machines  

Science Conference Proceedings (OSTI)

Virtual machine (VM) technologies are experiencing a resurgence in both industry and research communities. VMs offer many desirable features such as security, ease of management, OS customization, performance isolation, check-pointing, and migration, ...

Wei Huang; Jiuxing Liu; Bulent Abali; Dhabaleswar K. Panda

2006-06-01T23:59:59.000Z

336

Induction machine stray loss from inter-bar currents  

E-Print Network (OSTI)

Stray load loss refers generally to the sources of induction machine loss not accounted for by typical calculations of primary or secondary copper loss, no load core loss, or friction and windage loss. Harmonic rotor bar ...

Englebretson, Steven Carl

2009-01-01T23:59:59.000Z

337

Logomatic Gmbh Grinding Machines Fabrication | Open Energy Information  

Open Energy Info (EERE)

Logomatic Gmbh Grinding Machines Fabrication Logomatic Gmbh Grinding Machines Fabrication Jump to: navigation, search Name Logomatic Gmbh Grinding Machines Fabrication Place Mainaschaff, Germany Zip D-63814 Sector Solar Product German manufacturer of capital equipment for semiconductor and solar industries; for solar, offers diamond cropping and squaring machines. Coordinates 49.97746°, 9.085379° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":49.97746,"lon":9.085379,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

338

CRAD, Machine Shop Safe Operations Assessment Plan | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Machine Shop Safe Operations Assessment Plan Machine Shop Safe Operations Assessment Plan CRAD, Machine Shop Safe Operations Assessment Plan Performance Objective: The purpose of this assessment is to verify that machine shop operators are provided a safe and healthful workplace which will reduce or prevent injuries, illnesses, and accidental losses. Criteria: A worker protection program shall be implemented that provides a place of employment free from recognized hazards that are causing or likely to cause death or serious physical harm. (DOE O 440.1A Contractor Requirements Document (CRD)) Employees shall be encouraged to become involved in the identification and control of hazards in the workplace. (DOE O 440.1A CRD) Workers shall have the right, without reprisal, to accompany DOE worker protection personnel during workplace inspections. (DOE O44.1A

339

Enforcing performance isolation across virtual machines in xen  

Science Conference Proceedings (OSTI)

Virtual machines (VMs) have recently emerged as the basis for allocating resources in enterprise settings and hosting centers. One benefit of VMs in these environments is the ability to multiplex several operating systems on hardware based on dynamically ...

Diwaker Gupta; Ludmila Cherkasova; Rob Gardner; Amin Vahdat

2006-11-01T23:59:59.000Z

340

General Orientation to the Building 433 LOM Machine Shop  

NLE Websites -- All DOE Office Websites (Extended Search)

grinder in the LOM Machine Shop to grind non-ferrous materials (e.g., aluminum, brass, plastics, or wood). * Contact the Shop Coordinator or an APS Floor Coordinator if you...

Note: This page contains sample records for the topic "goldberg machine contest" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Simple Memory Machine Models for GPUs Koji Nakano  

E-Print Network (OSTI)

Simple Memory Machine Models for GPUs Koji Nakano Department of Information Engineering Hiroshima University Kagamiyama 1-4-1, Higashi Hiroshima, 739-8527 Japan Email: nakano@cs.hiroshima-u.ac.jp Abstract

Moreno Maza, Marc

342

Substrate denaturation and translocation by a proteolytic machine  

E-Print Network (OSTI)

Many AAA+ molecular machines generate power and drive cellular processes by harnessing energy from cycles of ATP hydrolysis. ClpX is a relatively simple AAA+ ATPase that powers regulated protein degradation by binding ...

Kenniston, Jon Anders

2005-01-01T23:59:59.000Z

343

A Machine Learning System for Recognizing Subclasses (Demo)  

SciTech Connect

Thematic information extraction from remote sensing images is a complex task. In this demonstration, we present *Miner machine learning system. In particular, we demonstrate an advanced subclass recognition algorithm that is specifically designed to extract finer classes from aggregate classes.

Vatsavai, Raju [ORNL

2012-01-01T23:59:59.000Z

344

Machine learning for host-based anomaly detection  

Science Conference Proceedings (OSTI)

Anomaly detection techniques complement, signature based methods for intrusion detection. Machine learning approaches are applied to anomaly detection for automated learning and detection. Traditional host-based anomaly detectors model system call sequences ...

Gaurav Tandon / Philip K. Chan

2008-01-01T23:59:59.000Z

345

Face occlusion detection for automated teller machine surveillance  

Science Conference Proceedings (OSTI)

Real time automatic alarm systems play an essential role in security management, as evidenced by the surveillance cameras installed in nearly all automated teller machines (ATMs). Whereas manual video surveillance requires constant staff monitoring, ...

Daw-Tung Lin; Ming-Ju Liu

2006-12-01T23:59:59.000Z

346

KCP relocates 18-ton machine | National Nuclear Security Administratio...  

National Nuclear Security Administration (NNSA)

8 a.m. and by lunchtime that day, it was in place at the NSC. The machine will undergo laser alignment and build test parts around mid-June. It will be ready for production again...

347

Designing a unified programming model for heterogeneous machines  

Science Conference Proceedings (OSTI)

While high-efficiency machines are increasingly embracing heterogeneous architectures and massive multithreading, contemporary mainstream programming languages reflect a mental model in which processing elements are homogeneous, concurrency is limited, ...

Michael Garland; Manjunath Kudlur; Yili Zheng

2012-11-01T23:59:59.000Z

348

Applications of machine learning: matching problems to tasks and methods  

Science Conference Proceedings (OSTI)

The terminology of Machine Learning and Data Mining methods does not always allow a simple match between practical problems and methods. While some problems look similar from the user's point of view, but require different methods to be solved, some ...

Maarten Van Someren; Tanja Urban?i?

2005-12-01T23:59:59.000Z

349

Water-Cooled Ice Machines, Purchasing Specifications for Energy...  

NLE Websites -- All DOE Office Websites (Extended Search)

Ice Makers. b) Measured in accordance with ARI Standard 810-2003. Does not include condenser water use. Buying Energy-Efficient Water-Cooled Ice Machines Several types of...

350

Simplified hybrid-secondary uncluttered machine and method ...  

An electric machine (40, 40') has a stator (43) and a rotor (46) and a primary air gap (48) has secondary coils (47c, 47d) separated from the rotor (46) by a ...

351

Development of magnetic induction machines for micro turbo machinery  

E-Print Network (OSTI)

This thesis presents the nonlinear analysis, design, fabrication, and testing of an axial-gap magnetic induction micro machine, which is a two-phase planar motor in which the rotor is suspended above the stator via mechanical ...

KöÅŸ er, Hür, 1976-

2002-01-01T23:59:59.000Z

352

Approximation algorithms for stochastic scheduling on unrelated machines  

E-Print Network (OSTI)

Motivated by problems in distributed computing, this thesis presents the first nontrivial polynomial time approximation algorithms for an important class of machine scheduling problems. We study the family of preemptive ...

Scott, Jacob (Jacob Healy)

2008-01-01T23:59:59.000Z

353

A Machine Learning Evaluation of an Artificial Immune System  

Science Conference Proceedings (OSTI)

ARTIS is an artificial immune system framework which contains several adaptive mechanisms. LISYS is a version of ARTIS specialized for the problem of network intrusion detection. The adaptive mechanisms of LISYS are characterized in terms of their machine-learning ...

Matthew Glickman; Justin Balthrop; Stephanie Forrest

2005-06-01T23:59:59.000Z

354

Machine Learning for the New York City Power Grid  

E-Print Network (OSTI)

Power companies can benefit from the use of knowledge discovery methods and statistical machine learning for preventive maintenance. We introduce a general process for transforming historical electrical grid data into ...

Rudin, Cynthia

355

Enhanced Interpretation of Electromagnetic Signature Analysis for Large Machines  

Science Conference Proceedings (OSTI)

This project developed and applied frequency domain models to enhance interpretation of electromagnetic signature analysis (EMSA) for large electrical generators. The project's rationale was to provide a prediction of the native frequency response of the winding calculated from machine dimensions and design data so that the positions of the resonances would be known a priore. This procedure allowed augmentation of an EMSA spectrum at the characteristic resonant frequencies of the machine in the interpret...

2010-11-16T23:59:59.000Z

356

Integrated Mirco-Machined Hydrogen Gas Sensors  

DOE Green Energy (OSTI)

The widespread use of hydrogen as both an industrial process gas and an energy storage medium requires fast, selective detection of hydrogen gas. This report discusses the development of a new type of solid-state hydrogen gas sensor that couples novel metal hydride thin films with a MEMS (Micro-Electro-Mechanical System) structure known as a micro-hotplate. In this project, Micro-hotplate structures were overcoated with engineered multilayers that serve as the active hydrogen-sensing layer. The change in electrical resistance of these layers when exposed to hydrogen gas was the measured sensor output. This project focused on achieving the following objectives: (1) Demonstrating the capabilities of micro-machined H2 sensors; (2) Developing an understanding of their performance; (3) Critically evaluating the utility and viability of this technology for life safety and process monitoring applications. In order to efficiently achieve these objectives, the following four tasks were identified: (1) Sensor Design and Fabrication; (2) Short Term Response Testing; (3) Long Term Behavior Investigation; (4) Systems Development. Key findings in the project include: The demonstration of sub-second response times to hydrogen; measured sensitivity to hydrogen concentrations below 200 ppm; a dramatic improvement in the sensor fabrication process and increased understanding of the processing properties and performance relationships of the devices; the development of improved sensing multilayers; and the discovery of a novel strain based hydrogen detection mechanism. The results of this program suggest that this hydrogen sensor technology has exceptional potential to meet the stringent demands of life safety applications as hydrogen utilization and infrastructure becomes more prevalent.

Frank DiMeoJr. Ing--shin Chen

2005-12-15T23:59:59.000Z

357

Machine to machine (M2M) technology in demand responsive commercial buildings  

SciTech Connect

Machine to Machine (M2M) is a term used to describe the technologies that enable computers, embedded processors, smart sensors, actuators and mobile devices to communicate with one another, take measurements and make decisions--often without human intervention. M2M technology was applied to five commercial buildings in a test. The goal was to reduce electric demand when a remote price signal rose above a predetermine price. In this system, a variable price signal was generated from a single source on the Internet and distributed using the meta-language, XML (Extensible Markup Language). Each of five commercial building sites monitored the common price signal and automatically shed site-specific electric loads when the price increased above predetermined thresholds. Other than price signal scheduling, which was set up in advance by the project researchers, the system was designed to operate without human intervention during the two-week test period. Although the buildings responded to the same price signal, the communication infrastructures used at each building were substantially different. This study provides an overview of the technologies used at each building site, the price generator/server, and each link in between. Network architecture, security, data visualization and site-specific system features are characterized. The results of the test are discussed, including: functionality at each site, measurement and verification techniques, and feedback from energy managers and building operators. Lessons learned from the test and potential implications for widespread rollout are provided.

Watson, David S.; Piette, Mary Ann; Sezgen, Osman; Motegi, Naoya; ten Hope, Laurie

2004-08-01T23:59:59.000Z

358

Online Load Balancing on Unrelated Machines with Startup Costs  

E-Print Network (OSTI)

Motivated by applications in energy-efficient scheduling in data centers, Khuller, Li, and Saha introduced the {\\em machine activation} problem as a generalization of the classical optimization problems of set cover and load balancing on unrelated machines. In this problem, a set of $n$ jobs have to be distributed among a set of $m$ (unrelated) machines, given the processing time of each job on each machine, where each machine has a startup cost. The goal is to produce a schedule of minimum total startup cost subject to a constraint $\\bf L$ on its makespan. While Khuller {\\em et al} considered the offline version of this problem, a typical scenario in scheduling is one where jobs arrive online and have to be assigned to a machine immediately on arrival. We give an $(O(\\log (mn)\\log m), O(\\log m))$-competitive randomized online algorithm for this problem, i.e. the schedule produced by our algorithm has a makespan of $O({\\bf L} \\log m)$ with high probability, and a total expected startup cost of $O(\\log (mn)\\lo...

Azar, Yossi

2012-01-01T23:59:59.000Z

359

Homopolar machine for reversible energy storage and transfer systems  

DOE Patents (OSTI)

A homopolar machine designed to operate as a generator and motor in reversibly storing and transferring energy between the machine and a magnetic load coil for a thermo-nuclear reactor. The machine rotor comprises hollow thin-walled cylinders or sleeves which form the basis of the system by utilizing substantially all of the rotor mass as a conductor thus making it possible to transfer substantially all the rotor kinetic energy electrically to the load coil in a highly economical and efficient manner. The rotor is divided into multiple separate cylinders or sleeves of modular design, connected in series and arranged to rotate in opposite directions but maintain the supply of current in a single direction to the machine terminals. A stator concentrically disposed around the sleeves consists of a hollow cylinder having a number of excitation coils each located radially outward from the ends of adjacent sleeves. Current collected at an end of each sleeve by sleeve slip rings and brushes is transferred through terminals to the magnetic load coil. Thereafter, electrical energy returned from the coil then flows through the machine which causes the sleeves to motor up to the desired speed in preparation for repetition of the cycle. To eliminate drag on the rotor between current pulses, the brush rigging is designed to lift brushes from all slip rings in the machine.

Stillwagon, Roy E. (Ruffsdale, PA)

1981-01-01T23:59:59.000Z

360

Homopolar machine for reversible energy storage and transfer systems  

DOE Patents (OSTI)

A homopolar machine designed to operate as a generator and motor in reversibly storing and transferring energy between the machine and a magnetic load coil for a thermo-nuclear reactor. The machine rotor comprises hollow thin-walled cylinders or sleeves which form the basis of the system by utilizing substantially all of the rotor mass as a conductor thus making it possible to transfer substantially all the rotor kinetic energy electrically to the load coil in a highly economical and efficient manner. The rotor is divided into multiple separate cylinders or sleeves of modular design, connected in series and arranged to rotate in opposite directions but maintain the supply of current in a single direction to the machine terminals. A stator concentrically disposed around the sleeves consists of a hollow cylinder having a number of excitation coils each located radially outward from the ends of adjacent sleeves. Current collected at an end of each sleeve by sleeve slip rings and brushes is transferred through terminals to the magnetic load coil. Thereafter, electrical energy returned from the coil then flows through the machine which causes the sleeves to motor up to the desired speed in preparation for repetition of the cycle. To eliminate drag on the rotor between current pulses, the brush rigging is designed to lift brushes from all slip rings in the machine.

Stillwagon, Roy E. (South Huntington Township, Huntington County, PA)

1978-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "goldberg machine contest" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Precise global collision detection in multi-axis NC-machining  

Science Conference Proceedings (OSTI)

We introduce a new approach to the problem of collision detection in multi-axis NC-machining. Due to the directional nature (tool axis) of multi-axis NC-machining, space subdivision techniques are adopted from ray-tracing algorithms and are extended ... Keywords: 5-Axis machining, Collision detection and verification, Lower envelopes, NC-machining, Ray tracing, Space subdivision

Oleg Ilushin; Gershon Elber; Dan Halperin; Ron Wein; Myung-Soo Kim

2005-08-01T23:59:59.000Z

362

Application of Particle Swarm Optimization technique for achieving desired milled surface roughness in minimum machining time  

Science Conference Proceedings (OSTI)

Face milling is a widely used machining operation to produce various components. The finished component depends not only on the dimensional accuracy but also on the surface finish. The present method of selection of machining parameters by trial and ... Keywords: Face milling, Machining parameters, Machining time, Particle Swarm Optimization, Surface roughness

S. Bharathi Raja; N. Baskar

2012-04-01T23:59:59.000Z

363

A comparative study for content-based dynamic spam classification using four machine learning algorithms  

Science Conference Proceedings (OSTI)

The growth of email users has resulted in the dramatic increasing of the spam emails during the past few years. In this paper, four machine learning algorithms, which are Naive Bayesian (NB), neural network (NN), support vector machine (SVM) and relevance ... Keywords: Naïve Bayesian, Neural network, Relevance vector machine, Spam classification, Support vector machine

Bo Yu; Zong-ben Xu

2008-05-01T23:59:59.000Z

364

The Kelastic variable wall mining machine. Interim final report  

SciTech Connect

This machine cuts coal along a longwall face extending up to 500 feet by a rotating auger with bits. The machine also transports the coal that is cut acting as screw conveyor. By virtue of an integral shroud comprising part of the conveyor the machine is also amenable to a separation of the zones where men work from air being contaminated by dust and methane gas by the cutting action. Beginning as single intake air courses, the air separates at the working section where one split provides fresh air to the Occupied Zone (OZ) for human needs and the other split purges and carries away dust and methane from face fragmentation in the Cutting Zone (CZ). The attractiveness of the Variable Wall Mining Machine is that it addresses the limitations of current longwall mining equipment: it can consistently out-produce continuous mining machines and most longwall shearing machines. It also is amenable to configuring an environment, the dual-duct system, where the air for human breathing is separated from dust-laden ventilating air with methane mixtures. The objective of the research was to perform a mathematical and experimental study of the interrelationships of the components of the system so that a computer model could demonstrate the workings of the system in an animation program. The analysis resulted in the compilation of the parameters for three different configurations of a dual aircourse system of ventilating underground mines. In addressing the goal of an inherently safe mining system the dual-duct adaptation to the Variable Wall Mining Machine appears to offer the path to solution. The respirable dust problem is solvable; the explosive dust problem is nearly solvable; and the explosive methane problem can be greatly reduced. If installed in a highly gassy mine, the dual duct models would also be considerably less costly.

1995-11-12T23:59:59.000Z

365

The Universe Adventure - Video Contest  

NLE Websites -- All DOE Office Websites (Extended Search)

We have as examples five videos prepared by student-teacher teams during a We have as examples five videos prepared by student-teacher teams during a summer workshop at BCCP. Watch these videos for examples and see how the students did with very minimal preparation time. Below each video are some critique comments from our local judges and students. The Expanding Universe The use of stop motion and animation is a creative way of showing principles. The explanation of a concept through using people was effective and entertaining. It is nice to see groups of people involved in the explanation rather than individuals presenting bit by bit. Using groups is effective and cohesive. Explanations of scientific concepts are thorough and clear. needs to speak slower and more clearly. Speech tends to be rushed. The Supernova Rap The concept is creative, original and entertaining, making it fun and

366

Technical Division Student Poster Contest  

Science Conference Proceedings (OSTI)

Oct 22, 2013 ... Chapters select a team of two-to-four chapter members to represent their school in a materials-themed knowledge and trivia competition.

367

Rotating electrical machines. Part 2: Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles)  

E-Print Network (OSTI)

Applies to d.c. machines and to a.c. synchronous and induction machines. The principles can be applied to other types of machines such as rotary converters, a.c. commutator motors and single-phase induction motors for which other methods of determining losses are used.

International Electrotechnical Commission. Geneva

1972-01-01T23:59:59.000Z

368

Mid States Tool and Machine Inc | Open Energy Information  

Open Energy Info (EERE)

and Machine Inc and Machine Inc Jump to: navigation, search Name Mid States Tool and Machine Inc Place decatur, Indiana Zip 46733 Sector Services Product Provides engineering and manufacturing, testing, delivery, and post-installation on-site services. Coordinates 33.23476°, -97.585979° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":33.23476,"lon":-97.585979,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

369

Electric Discharge Machining (EDM) Projects (4584), 4/11/2012  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Electric Discharge Machining (EDM) Projects (4584) Electric Discharge Machining (EDM) Projects (4584) Program or Field Office: Y -12 Site Office Location(s) (Citv/Countv/State): Oak Ridge, Anderson County, Tennessee Proposed Action Description: Submit by E-mail The proposed action is to installation of oil submerged Electric Discharge Machining (EDM) for development and production use. Categorical Exclusion(s) Applied: 81.31 -Installation or relocation of machinery and equipment For the complete DOE National Environmental Policy Act regulations regarding categorical exclusions, including the full text of each categorical exclusion, see Subpart D of 10 CFR Part 1021. Regulatory Requirements in 10 CFR 1021.410(b): (See full text in regulation) [{Jrhe proposal fits within a class of actions that is listed in Appendix A orB to 10 CFR Part 1021, Subpart D.

370

Manz Intech Machines Co Ltd | Open Energy Information  

Open Energy Info (EERE)

Intech Machines Co Ltd Intech Machines Co Ltd Jump to: navigation, search Name Manz Intech Machines Co Ltd Place Taoyuan, Taiwan Zip 320 Sector Solar Product Taiwan-based manufacturer producing wet-chemical process equipment for the LCD and PCB industries and for thin-film solar PV production. Coordinates 25.001909°, 121.304977° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":25.001909,"lon":121.304977,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

371

Silicon Micromachined Dimensional Calibration Artifact for Mesoscale Measurement Machines  

NLE Websites -- All DOE Office Websites (Extended Search)

Silicon Micromachined Dimensional Calibration Silicon Micromachined Dimensional Calibration Artifact for Mesoscale Measurement Machines 1 Silicon Micromachined Dimensional Calibration Artifact for Mesoscale Measurement Machines 2 Sandia National Laboratories PO Box 5800 Albuquerque, NM 87185 USA Hy D. Tran, PhD, PE Phone: (505)844-5417 Fax: (505)844-4372 hdtran@sandia.gov AFFIRMATION: I affirm that all information submitted as a part of, or supplemental to, this entry is a fair and accurate representation of this product. ___________________________________ Hy D. Tran Not a joint entry. Silicon Micromachined Dimensional Calibration Artifact for Mesoscale Measurement Machines The silicon hybrid artifact is an anisotropic-etched silicon standard that is used as a calibration reference artifact to calibrate vision-based and

372

International Business Machines Corp IBM | Open Energy Information  

Open Energy Info (EERE)

Machines Corp IBM Machines Corp IBM Jump to: navigation, search Name International Business Machines Corp (IBM) Place Armonk, New York Zip 10504 Sector Services Product IBM is a technology company supplying hardware, software and Information Technology services. Coordinates 41.119417°, -73.708388° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":41.119417,"lon":-73.708388,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

373

Be a Lean, Mean, Green Eating Machine | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Be a Lean, Mean, Green Eating Machine Be a Lean, Mean, Green Eating Machine Be a Lean, Mean, Green Eating Machine January 31, 2012 - 2:53pm Addthis Kristin Swineford Communication Specialist, Weatherization and Intergovernmental Programs Like most Americans, I watched the State of the Union to hear President Obama outline his goals for the year ahead, to understand his energy outlook and plans, and of course, to see what Michelle would be wearing (a stunning royal blue, of course). When listening to the President highlight his administration's clean energy initiatives, I couldn't help but remember the First Family's goals to reduce childhood obesity in America. By no surprise, the link between nationwide health improvement and energy efficiency efforts is strong. By reducing our demand for processed and imported foods, we can improve the

374

DOE - Office of Legacy Management -- Etna Machine Co - OH 28  

NLE Websites -- All DOE Office Websites (Extended Search)

Etna Machine Co - OH 28 Etna Machine Co - OH 28 FUSRAP Considered Sites Site: Etna Machine Co. (OH.28 ) Eliminated from further consideration under FUSRAP Designated Name: Not Designated Alternate Name: None Location: 3400 Maplewood Avenue , Toledo , Ohio OH.28-1 Evaluation Year: 1987 OH.28-1 Site Operations: Conducted swaging experiment to reduce the diameter of a hot-rolled uranium metal rod Research/Development and Testing on Uranium Metal in December 1950 (lasted only two days). OH.28-1 Site Disposition: Eliminated - Limited scope of activities performed there - Potential for residual radioactive contamination is considered remote OH.28-2 Radioactive Materials Handled: Yes Primary Radioactive Materials Handled: Uranium OH.28-1 Radiological Survey(s): None Indicated

375

Be a Lean, Mean, Green Eating Machine | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Be a Lean, Mean, Green Eating Machine Be a Lean, Mean, Green Eating Machine Be a Lean, Mean, Green Eating Machine January 31, 2012 - 2:53pm Addthis Kristin Swineford Communication Specialist, Weatherization and Intergovernmental Programs Like most Americans, I watched the State of the Union to hear President Obama outline his goals for the year ahead, to understand his energy outlook and plans, and of course, to see what Michelle would be wearing (a stunning royal blue, of course). When listening to the President highlight his administration's clean energy initiatives, I couldn't help but remember the First Family's goals to reduce childhood obesity in America. By no surprise, the link between nationwide health improvement and energy efficiency efforts is strong. By reducing our demand for processed and imported foods, we can improve the

376

Development of precision machining and inspection technology for structural ceramics  

SciTech Connect

Finish machining operations contribute the majority of the costs associated with fabricating high quality ceramic products. These components are typically used in harsh environments such as diesel engines, the defense industry, and automotive applications. The required finishing operations involve a variety of technology areas including process controls, process analysis, product certification, etc. and are not limited only to component grinding methods. The broad range of manufacturing problem solving expertise available in Oak Ridge provided resources that were far beyond what is available to the Coors manufacturing sites. Coors contributed equipment, such as the computer controls and part handling mechanisms associated with a state-of-the-art inspection machine plus operation-specific experience base. In addition, addressing these challenging tasks enabled Oak Ridge personnel to maintain familarity with rapidly advancing technologies, such as those associated with machine vision equipment, process monitoring techniques, and computer control systems.

Barkman, W.E.

1997-03-06T23:59:59.000Z

377

Holographic Labeling And Reading Machine For Authentication And Security Appications  

DOE Patents (OSTI)

A holographic security label and automated reading machine for marking and subsequently authenticating any object such as an identification badge, a pass, a ticket, a manufactured part, or a package is described. The security label is extremely difficult to copy or even to read by unauthorized persons. The system comprises a holographic security label that has been created with a coded reference wave, whose specification can be kept secret. The label contains information that can be extracted only with the coded reference wave, which is derived from a holographic key, which restricts access of the information to only the possessor of the key. A reading machine accesses the information contained in the label and compares it with data stored in the machine through the application of a joint transform correlator, which is also equipped with a reference hologram that adds additional security to the procedure.

Weber, David C. (Rancho Santa Margarita, CA); Trolinger, James D. (Costa Mesa, CA)

1999-07-06T23:59:59.000Z

378

Machine-learning algorithm aims to accelerate materials discovery | Argonne  

NLE Websites -- All DOE Office Websites (Extended Search)

Science Science Computing, Environment & Life Sciences Energy Engineering & Systems Analysis Photon Sciences Physical Sciences & Engineering Energy Frontier Research Centers Science Highlights Postdoctoral Researchers Machine-learning algorithm aims to accelerate materials discovery July 16, 2013 Tweet EmailPrint A research team led by Argonne Leadership Computing Facility computational chemist Anatole von Lilienfeld is developing an algorithm that combines quantum chemistry with machine learning (artificial intelligence) to enable atomistic simulations that predict the properties of new materials with unprecedented speed. From innovations in medicine to novel materials for next-generation batteries, this approach could greatly accelerate the pace of materials discovery, with high-performance

379

Control coil arrangement for a rotating machine rotor  

DOE Patents (OSTI)

A rotating machine (e.g., a turbine, motor or generator) is provided wherein a fixed solenoid or other coil configuration is disposed adjacent to one or both ends of the active portion of the machine rotor for producing an axially directed flux in the active portion so as to provide planar axial control at single or multiple locations for rotor balance, levitation, centering, torque and thrust action. Permanent magnets can be used to produce an axial bias magnetic field. The rotor can include magnetic disks disposed in opposed, facing relation to the coil configuration.

Shah, Manoj R. (Latham, NY); Lewandowsk, Chad R. (Amsterdam, NY)

2001-07-31T23:59:59.000Z

380

Gelcasting compositions having improved drying characteristics and machinability  

DOE Patents (OSTI)

A gelcasting composition has improved drying behavior, machinability and shelf life in the dried and unfired state. The composition includes an inorganic powder, solvent, monomer system soluble in the solvent, an initiator system for polymerizing the monomer system, and a plasticizer soluble in the solvent. Dispersants and other processing aides to control slurry properties can be added. The plasticizer imparts an ability to dry thick section parts, to store samples in the dried state without cracking under conditions of varying relative humidity, and to machine dry gelcast parts without cracking or chipping. A method of making gelcast parts is also disclosed.

Janney, Mark A. (Knoxville, TN); Walls, Claudia A. H. (Oak Ridge, TN)

2001-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "goldberg machine contest" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Control Coil Arrangement for a Rotating Machine Rotor  

DOE Patents (OSTI)

A rotating machine (e.g., a turbine, motor or generator) is provided wherein a fixed solenoid or other coil configuration is disposed adjacent to one or both ends of the active portion of the machine rotor for producing an axially directed flux in the active portion so as to provide planar axial control at single or multiple locations for rotor balance, levitation, centering, torque and thrust action. Permanent magnets can be used to produce an axial bias magnetic field. The rotor can include magnetic disks disposed in opposed, facing relation to the coil configuration.

Shah, Manoj R.; Lewandowski, Chad R.

1999-05-05T23:59:59.000Z

382

Aspects of surface generation in orthogonal ultraprecision machining  

SciTech Connect

The depth of the plastically deformed layer at the workpiece surface which resulted in the orthogonal ultraprecision machining of Cu over the range of uncut chip thicknesses of 0.01-10 {mu}m was investigated. Two tools with the same nominal geometry but with differing edge geometries were used to machine both Te-Cu and fine grain Cu. Tool edge geometries were characterized by atomic force microscopy, taking into account the AFM cantilever tip radius. Magnitudes of the measured depths appear to be consistent with values reported in the literature and those arrived at by simple analyses.

Lucca, D.A.; Seo, Y.W. [Oklahoma State Univ., Stillwater, OK (United States). School of Mechanical and Aerospace Engineering; Rhorer, R.L. [Los Alamos National Lab., NM (United States)

1994-10-01T23:59:59.000Z

383

Human versus machine in the topic distillation task  

E-Print Network (OSTI)

This paper reports on and discusses a set of user experiments using the TREC 2003 Web interactive track protocol. The focus is on comparing humans and machine algorithms in terms of performance in a topic distillation task. We also investigated the effect of the search results layout in supporting the users ’ effort. We have demonstrated that machines can perform nearly as well as people on the topic distillation task. Given a system tailored to the task there is significant performance improvement and finally, given a presentation that supports the task, there is strong user satisfaction.

Mingfang Wu; Gheorghe Muresan; Alistair Mclean; Muh-chyun (morris Tang; Ross Wilkinson; Yuelin Li; Hyuk-jin Lee; Nichloas J. Belkin

2004-01-01T23:59:59.000Z

384

Two-dimensional finite element method simulation of a four-quadrant transducer prototype machine considering skewed slots  

Science Conference Proceedings (OSTI)

A four-quadrant transducer (4QT) electric machine is an integrated electric machine used for hybrid electric vehicles. In this article a 4QT prototype machine that is radially integrated by two permanent-magnet synchronous machines is analyzed. Skewed slots are adopted for the two machines

Ping Zheng; Peter Thelin; Erik Nordlund; Chandur Sadarangani

2006-01-01T23:59:59.000Z

385

The Cutting Edge of Modernity: Machine Tools in the United States and Germany 1930-1945  

E-Print Network (OSTI)

): Germany – see Figures 1 & 2; US – American Machinist (1930 and 1931, 1940, and 1945) and United States, Department of Labor, Bureau of Labor Statistics, Handbook 1951, p. 10, Table A-3. Of course, a simple comparison of the total machine tool stock may... .71 Forging machines 32,598 18,602 0.78 Milling machines 116,978 71,474 0.83 Pipe cutting and threading machines + Thread machines 42,142 27,531 0.89 Lathes 308,170 225,749 1.00 Presses (not forging presses) 174,379 130,303 1.02 Cutting-off machines 39,719 29...

Ristuccia, Cristiano A; Tooze, J Adam

2004-06-16T23:59:59.000Z

386

The Center for Frontiers of Subsurface Energy Security (A "Life at the Frontiers of Energy Research" contest entry from the 2011 Energy Frontier Research Centers (EFRCs) Summit and Forum)  

SciTech Connect

'The Center for Frontiers of Subsurface Energy Security (CFSES)' was submitted to the 'Life at the Frontiers of Energy Research' video contest at the 2011 Science for Our Nation's Energy Future: Energy Frontier Research Centers (EFRCs) Summit and Forum. Twenty-six EFRCs created short videos to highlight their mission and their work. CFSES is directed by Gary A. Pope at the University of Texas at Austin and partners with Sandia National Laboratories. The Office of Basic Energy Sciences in the U.S. Department of Energy's Office of Science established the 46 Energy Frontier Research Centers (EFRCs) in 2009. These collaboratively-organized centers conduct fundamental research focused on 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The overall purpose is to accelerate scientific progress toward meeting the nation's critical energy challenges.

Pope, Gary A. (Director, Center for Frontiers of Subsurface Energy Security); CFSES Staff

2011-05-01T23:59:59.000Z

387

Energy Frontier Research Center Materials Science of Actinides (A "Life at the Frontiers of Energy Research" contest entry from the 2011 Energy Frontier Research Centers (EFRCs) Summit and Forum)  

SciTech Connect

'Energy Frontier Research Center Materials Science of Actinides' was submitted by the EFRC for Materials Science of Actinides (MSA) to the 'Life at the Frontiers of Energy Research' video contest at the 2011 Science for Our Nation's Energy Future: Energy Frontier Research Centers (EFRCs) Summit and Forum. Twenty-six EFRCs created short videos to highlight their mission and their work. MSA is directed by Peter Burns at the University of Notre Dame, and is a partnership of scientists from ten institutions.The Office of Basic Energy Sciences in the U.S. Department of Energy's Office of Science established the 46 Energy Frontier Research Centers (EFRCs) in 2009. These collaboratively-organized centers conduct fundamental research focused on 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The overall purpose is to accelerate scientific progress toward meeting the nation's critical energy challenges.

Burns, Peter (Director, Materials Science of Actinides); MSA Staff

2011-05-01T23:59:59.000Z

388

Blast-induced ground vibration prediction using support vector machine  

Science Conference Proceedings (OSTI)

Ground vibrations induced by blasting are one of the fundamental problems in the mining industry and may cause severe damage to structures and plants nearby. Therefore, a vibration control study plays an important role in the minimization of environmental ... Keywords: Blast vibration, Coefficient of determination, Conventional vibration predictor equations, Mean absolute error, Support vector machine

Manoj Khandelwal

2011-07-01T23:59:59.000Z

389

ROSSLER NONLINEAR DYNAMICAL MACHINE FOR CRYPTOGRAPHY APPLICATIONS Sunil Pandey  

E-Print Network (OSTI)

of chemical kinetics. The Rossler system is described by a system of 3 coupled nonlinear ordinary differentialROSSLER NONLINEAR DYNAMICAL MACHINE FOR CRYPTOGRAPHY APPLICATIONS Sunil Pandey * M.Tech. (Info Sec Author e-mail: algosunil@yahoo.co.in ABSTRACT In many of the cryptography applications like password

International Association for Cryptologic Research (IACR)

390

Some problems of prepositional phrases in machine translation  

Science Conference Proceedings (OSTI)

Prepositions as functional words play an important role in the construction of phrases and sentences. They connect typically a noun or a pronoun to another word and show their relationships in a sentence. They are a kind of “small” word and ... Keywords: controlled language technique, disambiguation, equivalent, grammatical functions, machine translation (MT), prepositional phrase attachment (PP attachment), translation information

Xiaohong Wu; Sylviane Cardey; Peter Greenfield

2006-08-01T23:59:59.000Z

391

Induction of robust classifiers for web ontologies through kernel machines  

Science Conference Proceedings (OSTI)

The paper focuses on the task of approximate classification of semantically annotated individual resources in ontological knowledge bases. The method is based on classification models built through kernel methods, a well-known class of effective statistical ... Keywords: Individual classification, Inductive reasoning, Kernel methods, Ontology mining, Similarity, Support vector machines

Nicola Fanizzi; Claudia d'Amato; Floriana Esposito

2012-03-01T23:59:59.000Z

392

EMLTrust: An enhanced Machine Learning based Reputation System for MANETs  

Science Conference Proceedings (OSTI)

Many mission critical networks including MANETs for military communications and disaster relief communications rely on node cooperation. If malicious nodes gain access to such networks they can easily launch attacks, such as spreading viruses or spam, ... Keywords: Digital credentials, Fading Memories, Machine Learning, Trust management

Rehan Akbani; Turgay Korkmaz; G. V. Raju

2012-05-01T23:59:59.000Z

393

Catenation and Specialization for Tcl Virtual Machine Performance  

E-Print Network (OSTI)

Catenation and Specialization for Tcl Virtual Machine Performance Benjamin Vitale bv @ cs-in-time native-code compilation. In the context of the Tcl VM, we convert bytecodes to native Sparc code implementation. These are relatively long in Tcl, but dispatch is still a signif- icant overhead. However

Abdelrahman, Tarek S.

394

Network anomaly detection with the restricted Boltzmann machine  

Science Conference Proceedings (OSTI)

With the rapid growth and the increasing complexity of network infrastructures and the evolution of attacks, identifying and preventing network abuses is getting more and more strategic to ensure an adequate degree of protection from both external and ... Keywords: Anomaly detection, Energy-based models, Intrusion detection, Restricted Boltzmann machine, Semi-supervised learning

Ugo Fiore, Francesco Palmieri, Aniello Castiglione, Alfredo De Santis

2013-12-01T23:59:59.000Z

395

Pools of virtual boxes: building campus grids with virtual machines  

Science Conference Proceedings (OSTI)

A campus grid is a critical component of research cyberinfrastructure. A grid facilitates resource sharing, improving collaboration and increasing the capability to address large scale scientific and engineering problems. Resources comprising a grid ... Keywords: campus grid, deployment, distributed computing, high throughput computing, virtual machines, virtualization

David J. Herzfeld; Lars E. Olson; Craig A. Struble

2010-06-01T23:59:59.000Z

396

Predicting electricity distribution feeder failures using machine learning susceptibility analysis  

E-Print Network (OSTI)

This work has been partly supported by a research contract from Consolidated Edison. A Machine Learning (ML) System known as ROAMS (Ranker for Open-Auto Maintenance Scheduling) was developed to create failure-susceptibility rankings for almost one thousand 13.8kV-27kV energy distribution feeder cables that supply electricity to the boroughs of New

Philip Gross; Albert Boulanger; Marta Arias; David Waltz; Philip M. Long; Charles Lawson; Roger Anderson; Matthew Koenig; Mark Mastrocinque; William Fairechio; John A. Johnson; Serena Lee; Frank Doherty; Arthur Kressner

2006-01-01T23:59:59.000Z

397

Robotics and machine learning in a core college curriculum  

Science Conference Proceedings (OSTI)

In recent years, there has been an increase of interest in Robotics and Machine Learning in our society. Since the early days of industrial robotics, robots have been introduced to numerous areas of our everyday lives, ranging from robots in medicine ...

Boris Kerkez

2008-10-01T23:59:59.000Z

398

Support Vector Machines Applied to a Combustion Process  

Science Conference Proceedings (OSTI)

The following research aims to make the characterization of flames in the combustion process in an industrial boiler fossil fuel composed of one burner. The characterization of the flames is performed by analysis of electrical signals that are obtained ... Keywords: Combustion, electromagnetic radiation, principal components analysis, statistical moments, support vector machines

Claudia I. Torres, Fernando Hernandez, Antonio Trejo, Guillermo Ronquillo

2012-11-01T23:59:59.000Z

399

Big data, lifelong machine learning and transfer learning  

Science Conference Proceedings (OSTI)

A major challenge in today's world is the Big Data problem, which manifests itself in Web and Mobile domains as rapidly changing and heterogeneous data streams. A data-mining system must be able to cope with the influx of changing data in a continual ... Keywords: big data, lifelong machine learning, transfer learning

Qiang Yang

2013-02-01T23:59:59.000Z

400

Dependency-Based Chinese-English Statistical Machine Translation  

Science Conference Proceedings (OSTI)

We present a Chinese-English Statistical Machine Translation (SMT) system based on dependency tree mappings. We use a state-of-the-art dependency parser to parse the English translation of the Penn Chinese Treebank to make it bilingual and then learn ...

Xiaodong Shi; Yidong Chen; Jianfeng Jia

2009-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "goldberg machine contest" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Expert system development for vibration analysis in machine condition monitoring  

Science Conference Proceedings (OSTI)

Expert systems can be adapted for machine condition monitoring data interpretation due to the ability to identify systematic reasoning processes. As vibration analysis in condition monitoring is still generally performed by highly trained professionals, ... Keywords: Condition monitoring, Expert system, Vibration analysis

Stephan Ebersbach; Zhongxiao Peng

2008-01-01T23:59:59.000Z

402

Discrete element modeling of machine-manure interactions  

Science Conference Proceedings (OSTI)

The discrete element method (DEM) was applied to the study of the machine-product interactions occurring in manure handling and land application equipment. Two types of conveying systems (scraper and 4-auger system) were modeled along with a hopper and ... Keywords: Conveying systems, Discrete element method (DEM), Flow rate, Manure, Numerical modeling, Specific energy, Spreader

H. Landry; C. Laguë; M. Roberge

2006-06-01T23:59:59.000Z

403

Simulation of doubly-fed machine with improved wind turbine  

Science Conference Proceedings (OSTI)

Most of wind turbines use induction generators that are very reliable with low costs [2], but when it is straightly connected to the grid, maximum power is not accessible [1] and only a few change of speed between maximum speed and synchronous speed ... Keywords: doubly-fed machine, gearbox ratio, high speed shaft, low speed shaft, wind turbine

Hengameh Kojooyan Jafari

2009-02-01T23:59:59.000Z

404

Aquatic weed automatic classification using machine learning techniques  

Science Conference Proceedings (OSTI)

Aquatic weed control through chemical products has attracted much attention in the last years, mainly because of the ecological disorder caused by such plants, and also the consequences to the economical activities. However, this kind of control has ... Keywords: Aquatic weed, Artificial neural networks, Naïve Bayes, Optimum-path forest, Shape analysis, Support vector machines

LuíS A. M. Pereira; Rodrigo Y. M. Nakamura; Guilherme F. S. De Souza; Dagoberto Martins; JoãO P. Papa

2012-09-01T23:59:59.000Z

405

Improved Rooftop Detection in Aerial Images with Machine Learning  

Science Conference Proceedings (OSTI)

In this paper, we examine the use of machine learning to improve a rooftop detection process, one step in a vision system that recognizes buildings in overhead imagery. We review the problem of analyzing aerial images and describe an existing system ... Keywords: applications of learning, evaluation of algorithms, learning for computer vision, supervised learning

M. A. Maloof; P. Langley; T. O. Binford; R. Nevatia; S. Sage

2003-10-01T23:59:59.000Z

406

Efficient virtual machine support of runtime structural reflection  

Science Conference Proceedings (OSTI)

Increasing trends towards adaptive, distributed, generative and pervasive software have made object-oriented dynamically typed languages become increasingly popular. These languages offer dynamic software evolution by means of reflection, facilitating ... Keywords: Dynamically typed languages, JIT compilation, Prototype-based object-oriented model, SSCLI, Structural reflection, Virtual machine

Francisco Ortin; Jose Manuel Redondo; J. Baltasar García Perez-Schofield

2009-08-01T23:59:59.000Z

407

Using machine learning to predict catastrophes in dynamical systems  

Science Conference Proceedings (OSTI)

Nonlinear dynamical systems, which include models of the Earth's climate, financial markets and complex ecosystems, often undergo abrupt transitions that lead to radically different behavior. The ability to predict such qualitative and potentially disruptive ... Keywords: 37B30, 37N99, 65P99, 68T05, Conley index, Dynamical systems, Machine learning

Jesse Berwald; Tomáš Gedeon; John Sheppard

2012-03-01T23:59:59.000Z

408

Machine learning for event selection in high energy physics  

Science Conference Proceedings (OSTI)

The field of high energy physics aims to discover the underlying structure of matter by searching for and studying exotic particles, such as the top quark and Higgs boson, produced in collisions at modern accelerators. Since such accelerators are extraordinarily ... Keywords: Event selection, Evolutionary computation, High energy physics, Machine learning, Neural networks

Shimon Whiteson; Daniel Whiteson

2009-12-01T23:59:59.000Z

409

Machine Vision Analysis of the Energy Efficiency of Intermodal Trains  

E-Print Network (OSTI)

intermodal terminal mangers' feedback on loading performance for trains and be integrated into the software1 Machine Vision Analysis of the Energy Efficiency of Intermodal Trains YUNG-CHENG (REX) LAI JOHN M of constraints imposed by equipment design and diversity, there are often large gaps between intermodal loads

Barkan, Christopher P.L.

410

Virtual Machine Services: An Opportunity for Hardware Customization  

E-Print Network (OSTI)

of transistor count, which is leading to archi- tecture heterogeneity and customization. (2) Software developers (Virtual Machine), which executes services such as profiling, compilation, scheduling, and memory for potential improvements in energy through the use of hardware heterogeneity. This paper uses systematic

McKinley, Kathryn S.

411

Control system for an interior permanent magnet synchronous machine  

DOE Patents (OSTI)

A high performance, fully operational, four-quadrant control scheme is used in an interior permanent magnet synchronous machine. The machine operates smoothly with full performance in the constant-torque region as well as in the flux-weakening, constant-power region in both directions of motion. The transition between the constant-torque and constant-power regions is very smooth under all conditions of operation. Control in the constant-torque region is based on a vector or field-oriented technique, with the direct-axis aligned with the total stator flux, whereas constant-power region control is accomplished by orientation of the torque angle of the impressed square-wave voltage through the feedforward vector rotator. In a preferred embodiment, the control system employs a digital distributed microcomputer controller arrangement which relies upon various precisely estimated feedback signals, such as torque, flux, etc. The control scheme includes an outer torque control loop primarily for traction type applications, but also contemplates speed and position control loops for various industrial drives. A 70 hp drive system using a Neodymium-Iron-Boron permanent magnet machine and transistor pulse width modulating inverter has been designed and successfully tested. This control scheme also has application in controlling surface permanent magnet machines. 16 figs.

Bose, B.K.

1988-10-12T23:59:59.000Z

412

Energy management for hypervisor-based virtual machines  

E-Print Network (OSTI)

Current approaches to power management are based on operating systems with full knowledge of and full control over the underlying hardware; the distributed nature of multi-layered virtual machine environments renders such approaches insufficient. In this paper, we present a novel framework for energy management in modular, multi-layered operating system structures. The framework provides a unified model to partition and distribute energy, and mechanisms for energy-aware resource accounting and allocation. As a key property, the framework explicitly takes the recursive energy consumption into account, which is spent, e.g., in the virtualization layer or subsequent driver components. Our prototypical implementation targets hypervisor-based virtual machine systems and comprises two components: a host-level subsystem, which controls machine-wide energy constraints and enforces them among all guest OSes and service components, and, complementary, an energy-aware guest operating system, capable of fine-grained applicationspecific energy management. Guest level energy management thereby relies on effective virtualization of physical energy effects provided by the virtual machine monitor. Experiments with CPU and disk devices and an external data acquisition system demonstrate that our framework accurately controls and stipulates the power consumption of individual hardware devices, both for energy-aware and energyunaware guest operating systems. 1

Jan Stoess; Christian Lang; Frank Bellosa

2007-01-01T23:59:59.000Z

413

Micro rotary machine and methods for using same  

SciTech Connect

A micro rotary machine may include a micro actuator and a micro shaft coupled to the micro actuator. The micro shaft comprises a horizontal shaft and is operable to be rotated by the micro actuator. A micro tool is coupled to the micro shaft and is operable to perform work in response to motion of the micro shaft.

Stalford, Harold L. (Norman, OK)

2012-04-17T23:59:59.000Z

414

Anton, a special-purpose machine for molecular dynamics simulation  

Science Conference Proceedings (OSTI)

The ability to perform long, accurate molecular dynamics (MD) simulations involving proteins and other biological macro-molecules could in principle provide answers to some of the most important currently outstanding questions in the fields of biology, ... Keywords: bioinformatics, biomolecular system simulation, computational biology, computational drug design, molecular dynamics, protein folding, protein structure, special-purpose machine

David E. Shaw; Martin M. Deneroff; Ron O. Dror; Jeffrey S. Kuskin; Richard H. Larson; John K. Salmon; Cliff Young; Brannon Batson; Kevin J. Bowers; Jack C. Chao; Michael P. Eastwood; Joseph Gagliardo; J. P. Grossman; C. Richard Ho; Douglas J. Ierardi; István Kolossváry; John L. Klepeis; Timothy Layman; Christine McLeavey; Mark A. Moraes; Rolf Mueller; Edward C. Priest; Yibing Shan; Jochen Spengler; Michael Theobald; Brian Towles; Stanley C. Wang

2007-06-01T23:59:59.000Z

415

Training of support vector machines with Mahalanobis kernels  

Science Conference Proceedings (OSTI)

Radial basis function (RBF) kernels are widely used for support vector machines. But for model selection, we need to optimize the kernel parameter and the margin parameter by time-consuming cross validation. To solve this problem, in this paper we propose ...

Shigeo Abe

2005-09-01T23:59:59.000Z

416

MALEF: Framework for distributed machine learning and data mining  

Science Conference Proceedings (OSTI)

Growing importance of distributed data mining techniques has recently attracted attention of researchers in multiagent domain. In this paper we present a novel framework MultiAgent Learning Framework (MALEF) designed for both the agent-based ... Keywords: MAS, agent-based systems, architectures, data mining, distributed machine learning, market-based approaches, multi-agent systems, multiagent learning frameworks, unsupervised clustering

Jan Tozicka; Michael Rovatsos; Michal Pechoucek; Stepan Urban

2008-02-01T23:59:59.000Z

417

Electromechanical coupling model for cutterhead driving system of shield machines  

Science Conference Proceedings (OSTI)

The synchronization of the cutterhead driving system of shield machines is affected by not only the nonlinearity of mechanical transmission mechanism and the characteristics of driving motors, but also their interaction. In this paper, dynamics of the ... Keywords: cutterhead, electromechanical coupling, synchronization

Jianzhong Sun; Ran Liu; Yaqin Luo; Wei Sun

2010-11-01T23:59:59.000Z

418

Micro Electro Discharge Machining of Electrically Nonconductive Ceramics  

Science Conference Proceedings (OSTI)

EDM is a known process for machining of hard and brittle materials. Due to its noncontact and nearly forceless behaviour, it has been introduced into micro manufacturing and through constant development it is now an important means for producing high-precision micro geometries. One restriction of EDM is its limitation to electrically conducting materials.Today many applications, especially in the biomedical field, make use of the benefits of ceramic materials, such as high strength, very low wear and biocompatibility. Common ceramic materials such as Zirconium dioxide are, due to their hardness in the sintered state, difficult to machine with conventional cutting techniques. A demand for the introduction of EDM to these materials could so far not be satisfied because of their nonconductive nature.At the Chemnitz University of Technology and the Fraunhofer IWU, investigations in the applicability of micro-EDM for the machining of nonconductive ceramics are being conducted. Tests are undertaken using micro-EDM drilling with Tungsten carbide tool electrodes and ZrO{sub 2} ceramic workpieces. A starting layer, in literature often referred to as 'assisting electrode' is used to set up a closed electric circuit to start the EDM process. Combining carbon hydride based dielectric and a specially designed low-frequency vibration setup to excite the workpiece, the process environment can be held within parameters to allow for a constant EDM process even after the starting layer is machined. In the experiments a cylindrical 120 {mu}m diameter Tungsten carbide tool electrode and Y{sub 2}O{sub 3}- and MgO- stabilized ZrO{sub 2} worpieces are used. The current and voltage signals of the discharges within the different stages of the process (machining of the starting layer, machining of the base material, transition stage) are recorded and their characteristics compared to discharges in metallic material. Additionally, the electrode feed is monitored. The influences of the process parameters are analysed with regard to the discharge type, electrode wear and process speed.Using the found parameters, micro geometries can be successfully machined into nonconductive Y{sub 2}O{sub 3}- and MgO- stabilized ZrO{sub 2} ceramic by means of micro-EDM.

Schubert, A. [Chair Micromanufacturing Technology, Faculty of Mechanical Engineering, Chemnitz University of Technology, 09107 Chemnitz (Germany); Fraunhofer Institute for Machine Tools and Forming Technology IWU, 09126 Chemnitz (Germany); Zeidler, H.; Hackert, M. [Chair Micromanufacturing Technology, Faculty of Mechanical Engineering, Chemnitz University of Technology, 09107 Chemnitz (Germany); Wolf, N. [Fraunhofer Institute for Machine Tools and Forming Technology IWU, 09126 Chemnitz (Germany)

2011-05-04T23:59:59.000Z

419

Analysis of electromechanical interactions in a flywheel system with a doubly fed induction machine  

E-Print Network (OSTI)

This paper analyzes the electromechanical inter-action in a flywheel system with a doubly fed induction machine, used for wind farm power smoothing or grid frequency response control. The grid-connected electrical machine ...

Ran, Li

420

A new method for crude oil price forecasting based on support vector machines  

Science Conference Proceedings (OSTI)

This paper proposes a new method for crude oil price forecasting based on support vector machine (SVM). The procedure of developing a support vector machine model for time series forecasting involves data sampling, sample preprocessing, training & ...

Wen Xie; Lean Yu; Shanying Xu; Shouyang Wang

2006-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "goldberg machine contest" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

A Virtual Machine for a Type-omega Denotational Proof Language  

E-Print Network (OSTI)

In this thesis, I designed and implemented a virtual machine (VM) for a monomorphic variant of Athena, a type-omega denotational proof language (DPL). This machine attempts to maintain the minimum state required to ...

III, Teodoro Arvizo

2002-06-01T23:59:59.000Z

422

On the Performance of Informative Wavelets for Classification and Diagnosis of Machine Faults  

Science Conference Proceedings (OSTI)

This paper deals with an application of wavelets for feature extraction and classification of machine faults in a real-world machine data analysis environment. We have utilized informative wavelet algorithm to generate wavelets and subsequent coefficients ...

H. Ahmadi; R. Tafreshi; F. Sassani; G. Dumont

2001-12-01T23:59:59.000Z

423

Jack Case ? the man who helped bring uranium machining to Y...  

NLE Websites -- All DOE Office Websites (Extended Search)

the man who helped bring uranium machining to Y-12 Most of you realize that Y-12 is basically a huge and very precise machine shop. For years it has been the nation's only uranium...

424

A two-phase spherical electric machine for generating rotating uniform magnetic fields  

E-Print Network (OSTI)

This thesis describes the design and construction of a novel two-phase spherical electric machine that generates rotating uniform magnetic fields, known as a fluxball machine. Alternative methods for producing uniform ...

Lawler, Clinton T. (Clinton Thomas)

2007-01-01T23:59:59.000Z

425

Formulating Detergents and Personal Care ProductsChapter 6 Hand and Machine Dishwashing Products  

Science Conference Proceedings (OSTI)

Formulating Detergents and Personal Care Products Chapter 6 Hand and Machine Dishwashing Products Surfactants and Detergents eChapters Surfactants - Detergents Press Downloadable pdf of\tChapter 6 Hand and Machine

426

Revisiting Computational Thermodynamics through Machine Learning of High-Dimensional Data  

Science Conference Proceedings (OSTI)

A new perspective on alloy thermodynamics computation uses data-driven analysis and machine learning for the design and discovery of materials. The focus is on an integrated machine-learning framework

2013-01-01T23:59:59.000Z

427

Application of Support Vector Machine (SVM) and Proximal Support Vector Machine (PSVM) for fault classification of monoblock centrifugal pump  

Science Conference Proceedings (OSTI)

Monoblock centrifugal pumps are widely used in a variety of applications. Defects and malfunctions (faults) of these pumps result in significant economic loss. Therefore, the pumps must be under constant monitoring. When a possible fault is detected, ... Keywords: CAV, PSVM, bearing faults, cavitation, decision trees, fault classification, fault diagnosis, impeller faults, monoblock centrifugal pumps, proximal SVM, seal faults, support vector machines, vibration signals

N. R. Sakthivel; V. Sugumaran; Binoy B. Nair

2010-12-01T23:59:59.000Z

428

Machine Design Op.miza.on Based on Finite Element Analysis using  

E-Print Network (OSTI)

Toyota Prius! Nissan Leaf! Chevy Volt! #12;WEMPEC 5/2/2012 Condor Week 2012 WJ - 4 EV Electric Machine

Wisconsin at Madison, University of

429

A strategy of investigation on the thermal behaviour of motorised spindles under high-speed machining  

Science Conference Proceedings (OSTI)

Motorised spindles used for high-speed machining are notorious for their sudden catastrophic failures at high speeds mainly due to bearing thermal problems. Loss of machining accuracy is another major problem due to thermal deformation of the spindle, ... Keywords: FEM, angular contact ball bearings, bearing temperature, external cooling, finite element method, heat dissipation modelling, high speed machining, machining accuracy, motor heat generation, motorised spindles, simulation, spindle nose deformation, thermal deformation

V. Prabhu Raja; P. R. Thyla; P. Radhakrishnan

2006-09-01T23:59:59.000Z

430

Advanced Flywheel and Ultracapacitors as Embedded Solutions for Advanced Machine Tools and Robotics  

Science Conference Proceedings (OSTI)

Providing the precision metal cutting and forming capabilities for manufacturing worldwide, automated machine tools are industry's workhorses. When voltage sags upset machine tools, manufacturing processes stop or malfunction, damaging the tool cutting head or machined part. These events result in lost production, increased cost of goods, and higher manufacturing costs. This EPRI research project is part of a continuation of a multiyear effort to make machine tools more robust to voltage sags through tec...

2003-03-12T23:59:59.000Z

431

A population-based variable neighborhood search for the single machine total weighted tardiness problem  

Science Conference Proceedings (OSTI)

This paper investigates the single machine total weighted tardiness problem, in which a set of independent jobs with distinct processing times, weights, and due dates are to be scheduled on a single machine to minimize the sum of weighted tardiness of ... Keywords: Single machine scheduling, Total weighted tardiness, Variable neighborhood search

Xianpeng Wang; Lixin Tang

2009-06-01T23:59:59.000Z

432

Financial Data Mining Based on Support Vector Machines and Ensemble Learning  

Science Conference Proceedings (OSTI)

With the rapid development of e-commerce, financial data mining has been one of the most important research topics in the data mining community. Support vector machines (SVMs) and ensemble learning are two popular techniques in the machine learning field. ... Keywords: Financial Data Mining, Support Vector Machines, Ensemble Learning

Shi Lei; Ma Xinming; Xi Lei; Hu Xiaohong

2010-05-01T23:59:59.000Z

433

The Design for Warp Knitting Machine Traversing Control System Based on DSP  

Science Conference Proceedings (OSTI)

On the basis of in-depth study of warp knitting machine traversing control system, this paper designs a warp knitting machine traversing electronic control system based on digital signal processor (DSP). This system takes a three-phase permanent magnet ... Keywords: warp knitting machine, traversing motion, linear motor, DSP

De-Jun Li; Le-Ping Xu

2009-12-01T23:59:59.000Z

434

Studying a self-sustainable system by making a mind time machine  

Science Conference Proceedings (OSTI)

We present our pilot study on a special machine that self-sustains its rich dynamics in an open environment. We made a machine called "MTM" (Mind Time Machine) that runs all day long, receiving massive visual data from the environment, processing by ... Keywords: massive data, mind time, plasticity, sustainability

Takashi Ikegami

2010-09-01T23:59:59.000Z

435

Enhancing product performance in machining processes: statistical analysis and development of predictive models  

Science Conference Proceedings (OSTI)

Process parameters, tool geometry and operating conditions considerably influence the quality and the functional performance, including the service-life, of machined components. Surface characteristics of the machined products such as hardness and roughness ... Keywords: lubrication systems, predictive models, statistical analysis, sustainable machining

G. Rotella, S. Rizzuti, D. Umbrello

2013-07-01T23:59:59.000Z

436

Scheduling trains as a blocking parallel-machine job shop scheduling problem  

Science Conference Proceedings (OSTI)

In this paper, the train scheduling problem is modelled as a blocking parallel-machine job shop scheduling (BPMJSS) problem. In the model, trains, single-track sections and multiple-track sections, respectively, are synonymous with jobs, single machines ... Keywords: Blocking, Job shop scheduling, Parallel machine, Train scheduling

Shi Qiang Liu; Erhan Kozan

2009-10-01T23:59:59.000Z

437

Method and apparatus for characterizing and enhancing the functional performance of machine tools  

DOE Patents (OSTI)

Disclosed are various systems and methods for assessing and improving the capability of a machine tool. The disclosure applies to machine tools having at least one slide configured to move along a motion axis. Various patterns of dynamic excitation commands are employed to drive the one or more slides, typically involving repetitive short distance displacements. A quantification of a measurable merit of machine tool response to the one or more patterns of dynamic excitation commands is typically derived for the machine tool. Examples of measurable merits of machine tool performance include workpiece surface finish, and the ability to generate chips of the desired length.

Barkman, William E; Babelay, Jr., Edwin F; Smith, Kevin Scott; Assaid, Thomas S; McFarland, Justin T; Tursky, David A; Woody, Bethany; Adams, David

2013-04-30T23:59:59.000Z

438

Thanks, George Washington, for the Energy Efficient Washing Machine! |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Thanks, George Washington, for the Energy Efficient Washing Thanks, George Washington, for the Energy Efficient Washing Machine! Thanks, George Washington, for the Energy Efficient Washing Machine! February 20, 2012 - 5:00am Addthis Kristin Swineford Communication Specialist, Weatherization and Intergovernmental Programs For many of us, particularly those living east of the Mississippi river, President's Day weekend is not just a time to honor the birthday of our country's founding father, it's also the final escape from dreadfully cold and snowy days. However, those of us with pestering consumerist habits to feed always ensure our return to the metropolis by Monday, as the day is quickly taking on a new reputation: Second best shopping day of the year, after Black Friday. By now you're asking, "What does any of this have to do with energy

439

Thanks, George Washington, for the Energy Efficient Washing Machine! |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Thanks, George Washington, for the Energy Efficient Washing Thanks, George Washington, for the Energy Efficient Washing Machine! Thanks, George Washington, for the Energy Efficient Washing Machine! February 20, 2012 - 5:00am Addthis Kristin Swineford Communication Specialist, Weatherization and Intergovernmental Programs For many of us, particularly those living east of the Mississippi river, President's Day weekend is not just a time to honor the birthday of our country's founding father, it's also the final escape from dreadfully cold and snowy days. However, those of us with pestering consumerist habits to feed always ensure our return to the metropolis by Monday, as the day is quickly taking on a new reputation: Second best shopping day of the year, after Black Friday. By now you're asking, "What does any of this have to do with energy

440

List of Vending Machine Controls Incentives | Open Energy Information  

Open Energy Info (EERE)

Controls Incentives Controls Incentives Jump to: navigation, search The following contains the list of 64 Vending Machine Controls Incentives. CSV (rows 1 - 64) Incentive Incentive Type Place Applicable Sector Eligible Technologies Active APS - Energy Efficiency Solutions for Business (Arizona) Utility Rebate Program Arizona Commercial Industrial Institutional Local Government Retail Supplier Schools State Government Building Insulation Central Air conditioners Chillers Comprehensive Measures/Whole Building Custom/Others pending approval Energy Mgmt. Systems/Building Controls Lighting Lighting Controls/Sensors Motor VFDs Motors Programmable Thermostats Refrigerators LED Exit Signs Evaporative Coolers Vending Machine Controls Food Service Equipment Yes Alliant Energy Interstate Power and Light (Electric) - Business Energy Efficiency Rebate Programs (Iowa) Utility Rebate Program Iowa Commercial

Note: This page contains sample records for the topic "goldberg machine contest" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

OBSERVATION REPORT BendKing Pipe Bending Machine.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

BENDKING PIPE BENDING MACHI\NE BENDKING PIPE BENDING MACHI\NE DEMONSTRATION Field Observation Report for December 3 - 4, 2001 Date Published: March 2002 Brian Meindinger, RMOTC PREPARED FOR THE U.S. DEPARTMENT OF ENERGY ROCKY MOUNTAIN OILFIELD TESTING CENTER 907 N. POPLAR, SUITE 150 CASPER, WY 82601 1-888-599-2200 Approval: RMOTC Manager_____________________________ Date:______________ Disclaimer This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, nor any of their contractors, subcontractors, or their employees makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or any third party's use or the results of such use of any

442

Electron beam machining using rotating and shaped beam power distribution  

DOE Patents (OSTI)

An apparatus and method for electron beam (EB) machining (drilling, cutting and welding) that uses conventional EB guns, power supplies, and welding machine technology without the need for fast bias pulsing technology. The invention involves a magnetic lensing (EB optics) system and electronic controls to: 1) concurrently bend, focus, shape, scan, and rotate the beam to protect the EB gun and to create a desired effective power-density distribution, and 2) rotate or scan this shaped beam in a controlled way. The shaped beam power-density distribution can be measured using a tomographic imaging system. For example, the EB apparatus of this invention has the ability to drill holes in metal having a diameter up to 1000 .mu.m (1 mm or larger), compared to the 250 .mu.m diameter of laser drilling.

Elmer, John W. (Pleasanton, CA); O' Brien, Dennis W. (Livermore, CA)

1996-01-01T23:59:59.000Z

443

Simplified Hybrid-Secondary Uncluttered Machine And Method  

DOE Patents (OSTI)

An electric machine (40, 40') has a stator (43) and a rotor (46) and a primary air gap (48) has secondary coils (47c, 47d) separated from the rotor (46) by a secondary air gap (49) so as to induce a slip current in the secondary coils (47c, 47d). The rotor (46, 76) has magnetic brushes (A, B, C, D) or wires (80) which couple flux in through the rotor (46) to the secondary coils (47c, 47d) without inducing a current in the rotor (46) and without coupling a stator rotational energy component to the secondary coils (47c, 47d). The machine can be operated as a motor or a generator in multi-phase or single-phase embodiments. A method of providing a slip energy controller is also disclosed.

Hsu, John S [Oak Ridge, TN

2005-05-10T23:59:59.000Z

444

Permanent magnet machine with windings having strand transposition  

DOE Patents (OSTI)

This document discusses, among other things, a stator with transposition between the windings or coils. The coils are free from transposition to increase the fill factor of the stator slots. The transposition at the end connections between an inner coil and an outer coil provide transposition to reduce circulating current loss. The increased fill factor reduces further current losses. Such a stator is used in a dual rotor, permanent magnet machine, for example, in a compressor pump, wind turbine gearbox, wind turbine rotor.

Qu, Ronghai (Clifton Park, NY); Jansen, Patrick Lee (Scotia, NY)

2009-04-21T23:59:59.000Z

445

Radiator debris removing apparatus and work machine using same  

DOE Patents (OSTI)

A radiator assembly includes a finned radiator core and a debris removing apparatus having a compressed air inlet and at least one compressed air outlet configured to direct compressed air through the radiator core. A work machine such as a wheel loader includes a radiator and a debris removing apparatus coupled with on-board compressed air and having at least one pressurized gas outlet configured to direct a gas toward the face of the radiator.

Martin, Kevin L. (Washburn, IL); Elliott, Dwight E. (Chillicothe, IL)

2008-09-02T23:59:59.000Z

446

Augmenting Manual Dictionaries for Statistical Machine Translation Systems  

E-Print Network (OSTI)

We show that the usefulness of manually created dictionaries can be enhanced for a statistical machine translation system when new translations are automatically added which are simple morphological transformations (plural forms, different verb inflections) of the original. Further improvement is possible when assigning probabilities to the lexicon entries. We describe a method to do this on the basis of an automatically trained statistical lexicon. Experimental results are given for Chinese to English translation tasks and show a significant improvement in translation quality.

Stephan Vogel; Christian Monson

2004-01-01T23:59:59.000Z

447

Kinetic effects on ballooning modes in mirror machines  

SciTech Connect

A general procedure for examining the influence of kinetic effects on the stability of magnetohydrodynamic ballooning modes in mirror machines is presented. In particular, the basic kinetic ballooning mode equation for a nonaxisymmetric, arbitrary beta system with anisotropic pressure is derived. Considering a long-thin equilibrium typical of the tandem mirror, it is shown that this governing eigenmode equation reduces to a simple form independent of wave-particle resonant effects.

Tang, W.M.; Catto, P.J.

1981-07-01T23:59:59.000Z

448

Diamond tool machining of materials which react with diamond  

DOE Patents (OSTI)

Apparatus for the diamond machining of materials which detrimentally react with diamond cutting tools in which the cutting tool and the workpiece are chilled to very low temperatures. This chilling halts or retards the chemical reaction between the workpiece and the diamond cutting tool so that wear rates of the diamond tool on previously detrimental materials are comparable with the diamond turning of materials which do not react with diamond.

Lundin, Ralph L. (Los Alamos, NM); Stewart, Delbert D. (Los Alamos, NM); Evans, Christopher J. (Gaithersburg, MD)

1992-01-01T23:59:59.000Z

449

Simulation of Alpha-Channeling in Mirror Machines  

SciTech Connect

Applying ?-channeling techniques to mirror machines can significantly increase their effective reactivity, thus making open configurations more advantageous for practical fusion. A large fraction of ? particle energy can be extracted using rf waves. Effects employed to cool ? particles can also in principle be used to heat the fusion ions; the possibility to design a configuration of rf waves which could be used to perform both tasks is demonstrated.

A.I. Zhmoginov, N.J. Fisch

2008-03-17T23:59:59.000Z

450

Clean iron production and machining technology. Year 1 summary report, January 1--December 31, 1995  

SciTech Connect

The first phase of this project was conducted to develop a technique for evaluating the machinability of gray and ductile iron. That technique was then used to measure the machinability of a variety of irons and determine the processing factors that influenced and controlled machinability. The procedure developed to evaluate machinability involved drilling holes with a feed rate of 0.009 in/rev at various surface speeds. High speed steel drills were used so wear was observed more quickly. Microcarbides present in the irons were found to dominate the machinability. Pearlitic irons considered to have ``acceptable`` machinability (indicated either by tool life measured in the laboratory using high speed steel (HSS) drills or reports from commercial machine shops using other cutters) were found to contain from 8.9 to 10.5% by weight microscopic carbides. The tool wear rate increased when machining at higher surface speeds or machining irons containing higher weight percentage of microcarbides. All irons containing above 11.5% microcarbides consistently exhibited poor machinability. Tool wear results obtained using cubic boron nitride (CBN) cutters paralleled those obtained with HSS. Higher iron microcarbide concentrations produced faster tool wear. Experiments are now being formulated to explore methods of improving iron machinability. Future work will extend the study to ductile irons.

1996-03-05T23:59:59.000Z

451

Coordinate measuring machine test standard apparatus and method  

DOE Patents (OSTI)

A coordinate measuring machine test standard apparatus and method are disclosed which includes a rotary spindle having an upper phase plate and an axis of rotation, a kinematic ball mount attached to the phase plate concentric with the axis of rotation of the phase plate, a groove mounted at the circumference of the phase plate, and an arm assembly which rests in the groove. The arm assembly has a small sphere at one end and a large sphere at the other end. The small sphere may be a coordinate measuring machine probe tip and may have variable diameters. The large sphere is secured in the kinematic ball mount and the arm is held in the groove. The kinematic ball mount includes at least three mounting spheres and the groove is an angular locating groove including at least two locking spheres. The arm may have a hollow inner core and an outer layer. The rotary spindle may be a ratio reducer. The device is used to evaluate the measuring performance of a coordinate measuring machine for periodic recertification, including 2 and 3 dimensional accuracy, squareness, straightness, and angular accuracy. 5 figs.

Bieg, L.F.

1994-08-30T23:59:59.000Z

452

Muon Collider interaction region and machine-detector interface design  

Science Conference Proceedings (OSTI)

One of the key systems of a Muon Collider (MC) - seen as the most exciting option for the energy frontier machine in the post-LHC era - is its interaction region (IR). Designs of its optics, magnets and machine-detector interface are strongly interlaced and iterative. As a result of recent comprehensive studies, consistent solutions for the 1.5-TeV c.o.m. MC IR have been found and are described here. To provide the required momentum acceptance, dynamic aperture and chromaticity, an innovative approach was used for the IR optics. Conceptual designs of large-aperture high-field dipole and high-gradient quadrupole magnets based on Nb{sub 3}Sn superconductor were developed and analyzed in terms of the operating margin, field quality, mechanics, coil cooling and quench protection. Shadow masks in the interconnect regions and liners inside the magnets are used to mitigate the unprecedented dynamic heat deposition due to muon decays ({approx}0.5 kW/m). It is shown that an appropriately designed machine-detector interface (MDI) with sophisticated shielding in the detector has a potential to substantially suppress the background rates in the MC detector.

Mokhov, N.V.; Alexahin, Y.I.; Kashikhin, V.V.; Striganov, S.I.; Zlobin, A.V.; /Fermilab

2011-03-01T23:59:59.000Z

453

A Graphic Representation of States for Quantum Copying Machines  

E-Print Network (OSTI)

The aim of this paper is to introduce a new graphic representation of quantum states by means of a specific application: the analysis of two models of quantum copying machines. The graphic representation by diagrams of states offers a clear and detailed visualization of quantum information's flow during the unitary evolution of not too complex systems. The diagrams of states are exponentially more complex in respect to the standard representation and this clearly illustrates the discrepancy of computational power between quantum and classical systems. After a brief introductive exposure of the general theory, we present a constructive procedure to illustrate the new representation by means of concrete examples. Elementary diagrams of states for single-qubit and two-qubit systems and a simple scheme to represent entangled states are presented. Quantum copying machines as imperfect cloners of quantum states are introduced and the quantum copying machines of Griffiths and Niu and of Buzek and Hillery are analyzed, determining quantum circuits of easier interpretation. The method has indeed shown itself to be extremely successful for the representation of the involved quantum operations and it has allowed to point out the characteristic aspects of the quantum computations examined.

Sara Felloni; Giuliano Strini

2006-09-29T23:59:59.000Z

454

Coordinate measuring machine test standard apparatus and method  

DOE Patents (OSTI)

A coordinate measuring machine test standard apparatus and method which iudes a rotary spindle having an upper phase plate and an axis of rotation, a kinematic ball mount attached to the phase plate concentric with the axis of rotation of the phase plate, a groove mounted at the circumference of the phase plate, and an arm assembly which rests in the groove. The arm assembly has a small sphere at one end and a large sphere at the other end. The small sphere may be a coordinate measuring machine probe tip and may have variable diameters. The large sphere is secured in the kinematic ball mount and the arm is held in the groove. The kinematic ball mount includes at least three mounting spheres and the groove is an angular locating groove including at least two locking spheres. The arm may have a hollow inner core and an outer layer. The rotary spindle may be a ratio reducer. The device is used to evaluate the measuring performance of a coordinate measuring machine for periodic recertification, including 2 and 3 dimensional accuracy, squareness, straightness, and angular accuracy.

Bieg, Lothar F. (Louisville, CO)

1994-08-30T23:59:59.000Z

455

Method for producing fabrication material for constructing micrometer-scaled machines, fabrication material for micrometer-scaled machines  

DOE Patents (OSTI)

A method for producing fabrication material for use in the construction of nanometer-scaled machines is provided whereby similar protein molecules are isolated and manipulated at predetermined residue positions so as to facilitate noncovalent interaction, but without compromising the folding configuration or native structure of the original protein biomodules. A fabrication material is also provided consisting of biomodules systematically constructed and arranged at specific solution parameters.

Stevens, F.J.

1995-12-31T23:59:59.000Z

456

Agile machining and inspection thrust area team-on-machine probing / compatibility assessment of Parametric Technology Corporation (PTC) pro/CMM DMIS with Zeiss DMISEngine.  

SciTech Connect

The charter goal of the Agile Machining and Inspection Thrust Area Team is to identify technical requirements, within the nuclear weapons complex (NWC), for Agile Machining and Inspection capabilities. During FY 2008, the team identified Parametric Technology Corporation (PTC) Pro/CMM as a software tool for use in off-line programming of probing routines--used for measurement--for machining and turning centers. The probing routine would be used for in-process verification of part geometry. The same Pro/CMM program used on the machine tool could also be employed for program validation / part verification using a coordinate measuring machine (CMM). Funding was provided to determine the compatibility of the Pro/CMM probing program with CMM software (Zeiss DMISEngine).

Wade, James Rokwel; Tomlinson, Kurt; Bryce, Edwin Anthony

2008-09-01T23:59:59.000Z

457

The Behavior of Hydrogen Under Extreme Conditions on Ultrafast Timescales (A "Life at the Frontiers of Energy Research" contest entry from the 2011 Energy Frontier Research Centers (EFRCs) Summit and Forum)  

DOE Green Energy (OSTI)

'The Behavior of Hydrogen Under Extreme Conditions on Ultrafast Timescales ' was submitted by the Center for Energy Frontier Research in Extreme Environments (EFree) to the 'Life at the Frontiers of Energy Research' video contest at the 2011 Science for Our Nation's Energy Future: Energy Frontier Research Centers (EFRCs) Summit and Forum. Twenty-six EFRCs created short videos to highlight their mission and their work. EFree is directed by Ho-kwang Mao at the Carnegie Institute of Washington and is a partnership of scientists from thirteen institutions.The Office of Basic Energy Sciences in the U.S. Department of Energy's Office of Science established the 46 Energy Frontier Research Centers (EFRCs) in 2009. These collaboratively-organized centers conduct fundamental research focused on 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The overall purpose is to accelerate scientific progress toward meeting the nation's critical energy challenges. The mission of Energy Frontier Research in Extreme Environments is 'to accelerate the discovery and creation of energy-relevant materials using extreme pressures and temperatures.' Research topics are: catalysis (CO{sub 2}, water), photocatalysis, solid state lighting, optics, thermelectric, phonons, thermal conductivity, solar electrodes, fuel cells, superconductivity, extreme environment, radiation effects, defects, spin dynamics, CO{sub 2} (capture, convert, store), greenhouse gas, hydrogen (fuel, storage), ultrafast physics, novel materials synthesis, and defect tolerant materials.

Mao, Ho-kwang (Director, Center for Energy Frontier Research in Extreme Environments); EFree Staff

2011-05-01T23:59:59.000Z

458

Autonomic Materials for Smarter, Safer, Longer-Lasting Batteries (A "Life at the Frontiers of Energy Research" contest entry from the 2011 Energy Frontier Research Centers (EFRCs) Summit and Forum)  

DOE Green Energy (OSTI)

'Autonomic Materials for Smarter, Safer, Longer-Lasting Batteries' was submitted by the Center for Electrical Energy Storage (CEES) to the 'Life at the Frontiers of Energy Research' video contest at the 2011 Science for Our Nation's Energy Future: Energy Frontier Research Centers (EFRCs) Summit and Forum. Twenty-six EFRCs created short videos to highlight their mission and their work. CEES, an EFRC directed by Michael Thackery at Argonne National Laboratory is a partnership of scientists from three institutions: ANL (lead), Northwestern University, and the University of Illinois at Urbana-Champaign. The Office of Basic Energy Sciences in the U.S. Department of Energy's Office of Science established the 46 Energy Frontier Research Centers (EFRCs) in 2009. These collaboratively-organized centers conduct fundamental research focused on 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The overall purpose is to accelerate scientific progress toward meeting the nation's critical energy challenges. The mission of the Center for Electrical Energy Storage is 'to acquire a fundamental understanding of interfacial phenomena controlling electrochemical processes that will enable dramatic improvements in the properties and performance of energy storage devices, notable Li ion batteries.' Research topics are: electrical energy storage, batteries, battery electrodes, electrolytes, adaptive materials, interfacial characterization, matter by design; novel materials synthesis, charge transport, and defect tolerant materials.

Thackeray, Michael (Director, Center for Electrical Energy Storage); CEES Staff

2011-05-01T23:59:59.000Z

459

The Center for Material Science of Nuclear Fuel (A "Life at the Frontiers of Energy Research" contest entry from the 2011 Energy Frontier Research Centers (EFRCs) Summit and Forum)  

Science Conference Proceedings (OSTI)

'The Center for Material Science of Nuclear Fuel (CMSNF)' was submitted by the CMSNF to the 'Life at the Frontiers of Energy Research' video contest at the 2011 Science for Our Nation's Energy Future: Energy Frontier Research Centers (EFRCs) Summit and Forum. Twenty-six EFRCs created short videos to highlight their mission and their work. CMSNF, an EFRC directed by Todd Allen at the Idaho National Laboratory is a partnership of scientists from six institutions: INL (lead), Colorado School of Mines, University of Florida, Florida State University, Oak Ridge National Laboratory, and the University of Wisconsin at Madison. The Office of Basic Energy Sciences in the U.S. Department of Energy's Office of Science established the 46 Energy Frontier Research Centers (EFRCs) in 2009. These collaboratively-organized centers conduct fundamental research focused on 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The overall purpose is to accelerate scientific progress toward meeting the nation's critical energy challenges. The mission of the Center for Materials Science of Nuclear Fuels is 'to achieve a first-principles based understanding of the effect of irradiation-induced defects and microstructures on thermal transport in oxide nuclear fuels.' Research topics are: phonons, thermal conductivity, nuclear, extreme environment, radiation effects, defects, and matter by design.

Allen, Todd (Director, Center for Material Science of Nuclear Fuel); CMSNF Staff

2011-05-01T23:59:59.000Z

460

Center for Materials at Irradiation and Mechanical Extremes at LANL (A "Life at the Frontiers of Energy Research" contest entry from the 2011 Energy Frontier Research Centers (EFRCs) Summit and Forum)  

Science Conference Proceedings (OSTI)

'Center for Materials at Irradiation and Mechanical Extremes (CMIME) at LANL' was submitted by CMIME to the 'Life at the Frontiers of Energy Research' video contest at the 2011 Science for Our Nation's Energy Future: Energy Frontier Research Centers (EFRCs) Summit and Forum. Twenty-six EFRCs created short videos to highlight their mission and their work. CMIME, an EFRC directed by Michael Nastasi at Los Alamos National Laboratory is a partnership of scientists from four institutions: LANL (lead), Carnegia Mellon University, the University of Illinois at Urbana Champaign, and the Massachusetts Institute of Technology. The Office of Basic Energy Sciences in the U.S. Department of Energy's Office of Science established the 46 Energy Frontier Research Centers (EFRCs) in 2009. These collaboratively-organized centers conduct fundamental research focused on 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The overall purpose is to accelerate scientific progress toward meeting the nation's critical energy challenges.

Michael Nastasi (Director, Center for Materials at Irradiation and Mechanical Extremes); CMIME Staff

2011-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "goldberg machine contest" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Solar Cells from Plastics? Mission Possible at the PHaSE Energy Research Center, UMass Amherst (A "Life at the Frontiers of Energy Research" contest entry from the 2011 Energy Frontier Research Centers (EFRCs) Summit and Forum)  

DOE Green Energy (OSTI)

'Solar Cells from Plastics? Mission Possible at the PHaSE Energy Research Center, UMass Amherst' was submitted by the Polymer-Based Materials for Harvesting Solar Energy (PHaSE) EFRC to the 'Life at the Frontiers of Energy Research' video contest at the 2011 Science for Our Nation's Energy Future: Energy Frontier Research Centers (EFRCs) Summit and Forum. Twenty-six EFRCs created short videos to highlight their mission and their work. PHaSE, an EFRC co-directed by Thomas P. Russell and Paul M. Lahti at the University of Massachusetts, Amherst, is a partnership of scientists from six institutions: UMass (lead), Oak Ridge National Laboratory, Pennyslvania State University, Rensselaer Polytechnic Institute, and the University of Pittsburgh. The Office of Basic Energy Sciences in the U.S. Department of Energy's Office of Science established the 46 Energy Frontier Research Centers (EFRCs) in 2009. These collaboratively-organized centers conduct fundamental research focused on 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The overall purpose is to accelerate scientific progress toward meeting the nation's critical energy challenges.

Russell, Thomas P; Lahti, Paul M. (PHaSE - Polymer-Based Materials for Harvesting Solar Energy); PHaSE Staff

2011-05-01T23:59:59.000Z

462

Center for Defect Physics - Energy Frontier Research Center (A "Life at the Frontiers of Energy Research" contest entry from the 2011 Energy Frontier Research Centers (EFRCs) Summit and Forum)  

SciTech Connect

'Center for Defect Physics - Energy Frontier Research Center' was submitted by the Center for Defect Physics (CDP) to the 'Life at the Frontiers of Energy Research' video contest at the 2011 Science for Our Nation's Energy Future: Energy Frontier Research Centers (EFRCs) Summit and Forum. Twenty-six EFRCs created short videos to highlight their mission and their work. CDP is directed by G. Malcolm Stocks at Oak Ridge National Laboratory, and is a partnership of scientists from nine institutions: Oak Ridge National Laboratory (lead); Ames Laboratory; Brown University; University of California, Berkeley; Carnegie Mellon University; University of Illinois, Urbana-Champaign; Lawrence Livermore National Laboratory; Ohio State University; and University of Tennessee. The Office of Basic Energy Sciences in the U.S. Department of Energy's Office of Science established the 46 Energy Frontier Research Centers (EFRCs) in 2009. These collaboratively-organized centers conduct fundamental research focused on 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The overall purpose is to accelerate scientific progress toward meeting the nation's critical energy challenges.

Stocks, G. Malcolm (Director, Center for Defect Physics in Structural Materials); CDP Staff

2011-05-01T23:59:59.000Z

463

EFRC:CST at the University of Texas at Austin - A DOE Energy Frontier Research Center (A "Life at the Frontiers of Energy Research" contest entry from the 2011 Energy Frontier Research Centers (EFRCs) Summit and Forum)  

DOE Green Energy (OSTI)

'EFRC:CST at the University of Texas at Austin - A DOE Energy Frontier Research Center' was submitted by the EFRC for Understanding Charge Separation and Transfer at Interfaces in Energy Materials (EFRC:CST) to the 'Life at the Frontiers of Energy Research' video contest at the 2011 Science for Our Nation's Energy Future: Energy Frontier Research Centers (EFRCs) Summit and Forum. Twenty-six EFRCs created short videos to highlight their mission and their work. EFRC:CST is directed by Xiaoyang Zhu at the University of Texas at Austin in partnership with Sandia National Laboratories. The Office of Basic Energy Sciences in the U.S. Department of Energy's Office of Science established the 46 Energy Frontier Research Centers (EFRCs) in 2009. These collaboratively-organized centers conduct fundamental research focused on 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The overall purpose is to accelerate scientific progress toward meeting the nation's critical energy challenges.

Zhu, Xiaoyang (Director, Understanding Charge Separation and Transfer at Interfaces in Energy Materials); CST Staff

2011-05-01T23:59:59.000Z

464

Undergraduate Research at the Center for Energy Efficient Materials (A "Life at the Frontiers of Energy Research" contest entry from the 2011 Energy Frontier Research Centers (EFRCs) Summit and Forum  

DOE Green Energy (OSTI)

'Undergraduate Research at the Center for Energy Efficient Materials (CEEM)' was submitted by CEEM to the 'Life at the Frontiers of Energy Research' video contest at the 2011 Science for Our Nation's Energy Future: Energy Frontier Research Centers (EFRCs) Summit and Forum. Twenty-six EFRCs created short videos to highlight their mission and their work. CEEM, an EFRC directed by John Bowers at the University of California, Santa Barbara is a partnership of scientists from four institutions: UC, Santa Barbara (lead), UC, Santa Cruz, Los Alamos National Laboratory, and National Renewable Energy Laboratory. The Office of Basic Energy Sciences in the U.S. Department of Energy's Office of Science established the 46 Energy Frontier Research Centers (EFRCs) in 2009. These collaboratively-organized centers conduct fundamental research focused on 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The overall purpose is to accelerate scientific progress toward meeting the nation's critical energy challenges. The mission of the Center for Energy Efficient Materials is 'to discover and develop materials that control the interactions between light, electricity, and heat at the nanoscale for improved solar energy conversion, solid-state lighting, and conversion of heat into electricity.' Research topics are: solar photovoltaic, photonic, solid state lighting, optics, thermoelectric, bio-inspired, electrical energy storage, batteries, battery electrodes, novel materials synthesis, and scalable processing.

Bowers, John (Director, Center for Energy Efficient Materials ); CEEM Staff

2011-05-01T23:59:59.000Z

465

CABS: Green Energy for Our Nation's Future (A "Life at the Frontiers of Energy Research" contest entry from the 2011 Energy Frontier Research Centers (EFRCs) Summit and Forum)  

SciTech Connect

'CABS: Green Energy for our Nation's Future' was submitted by the Center for Advanced Biofuel Systems (CABS) to the 'Life at the Frontiers of Energy Research' video contest at the 2011 Science for Our Nation's Energy Future: Energy Frontier Research Centers (EFRCs) Summit and Forum. Twenty-six EFRCs created short videos to highlight their mission and their work. CABS, an EFRC directed by Jan Jaworski at the Donald Danforth Plant Science Center is a partnership of scientists from five institutions: Donald Danforth Plant Science Center (lead), Michigan State University, the University of Nebraska, New Mexico Consortium/LANL, and Washington State University. The Office of Basic Energy Sciences in the U.S. Department of Energy's Office of Science established the 46 Energy Frontier Research Centers (EFRCs) in 2009. These collaboratively-organized centers conduct fundamental research focused on 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The overall purpose is to accelerate scientific progress toward meeting the nation's critical energy challenges.

Jan Jaworski (Director, Center for Advanced Biofuel Systems); Sayre, Richard T. (previous Director); CABS Staff

2011-05-01T23:59:59.000Z

466

Moving from Petroleum to Plants to Energize our World (A "Life at the Frontiers of Energy Research" contest entry from the 2011 Energy Frontier Research Centers (EFRCs) Summit and Forum)  

DOE Green Energy (OSTI)

'Moving from Petroleum to Plants to Energize our World' was submitted by the Center for Direct Catalytic Conversion of Biomass to Biofuels (C3Bio) to the 'Life at the Frontiers of Energy Research' video contest at the 2011 Science for Our Nation's Energy Future: Energy Frontier Research Centers (EFRCs) Summit and Forum. Twenty-six EFRCs created short videos to highlight their mission and their work. C3Bio, an EFRC directed by Maureen McCann at Purdue University is a partnership between five institutions: Purdue (lead), Argonne National Laboratory, National Renewable Energy Laboratory, Northeastern University, and the University of Tennessee. The Office of Basic Energy Sciences in the U.S. Department of Energy's Office of Science established the 46 Energy Frontier Research Centers (EFRCs) in 2009. These collaboratively-organized centers conduct fundamental research focused on 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The overall purpose is to accelerate scientific progress toward meeting the nation's critical energy challenges.

McCann, Maureen (Director, Center for Direct Catalytic Conversion of Biomass to Biofuels); C3Bio Staff

2011-05-01T23:59:59.000Z

467

Analytical Parameterization of Rotors and Proof of a Goldberg Conjecture by Optimal Control Theory  

Science Conference Proceedings (OSTI)

Curves which can be rotated freely in an $n$-gon (that is, a regular polygon with $n$ sides) so that they always remain in contact with every side of the $n$-gon are called rotors. Using optimal control theory, we prove that the rotor with minimal area ... Keywords: Noether theorem, Pontryagin maximum principle, bang control, constant width bodies, convexity, optimal control, rotors, shape optimization, support function, switching point

Térence Bayen

2008-11-01T23:59:59.000Z

468

A Description of Protocols for Private Credentials Ariel Glenn, Ian Goldberg, Frederic Legare, Anton Stiglic  

E-Print Network (OSTI)

an attribute with the value qeq`!qer ! , which may encode an expiry date, for example, as an attribute

International Association for Cryptologic Research (IACR)

469

How small can thermal machines be? The smallest possible refrigerator  

E-Print Network (OSTI)

We investigate the fundamental dimensional limits to thermodynamic machines. In particular we show that it is possible to construct self-contained refrigerators (i.e. not requiring external sources of work) consisting of only a small number of qubits and/or qutrits. We present three different models, consisting of two qubits, a qubit and a qutrit with nearest-neighbour interactions, and a single qutrit respectively. We then investigate fundamental limits to their performance; in particular we show that it is possible to cool towards absolute zero.

Noah Linden; Sandu Popescu; Paul Skrzypczyk

2009-08-14T23:59:59.000Z

470

Time machines and traversable wormholes in modified theories of gravity  

E-Print Network (OSTI)

We review recent work on wormhole geometries in the context of modified theories of gravity, in particular, in f(R) gravity and with a nonminimal curvature-matter coupling, and in the recently proposed hybrid metric-Palatini theory. In principle, the normal matter threading the throat can be shown to satisfy the energy conditions and it is the higher order curvatures terms that sustain these wormhole geometries. We also briefly review the conversion of wormholes into time-machines, explore several of the time travel paradoxes and possible remedies to these intriguing side-effects in wormhole physics.

Francisco S. N. Lobo

2012-12-05T23:59:59.000Z

471

Stator for a rotating electrical machine having multiple control windings  

DOE Patents (OSTI)

A rotating electric machine is provided which includes multiple independent control windings for compensating for rotor imbalances and for levitating/centering the rotor. The multiple independent control windings are placed at different axial locations along the rotor to oppose forces created by imbalances at different axial locations along the rotor. The multiple control windings can also be used to levitate/center the rotor with a relatively small magnetic field per unit area since the rotor and/or the main power winding provides the bias field.

Shah, Manoj R. (Latham, NY); Lewandowski, Chad R. (Amsterdam, NY)

2001-07-17T23:59:59.000Z

472

Direct control of air gap flux in permanent magnet machines  

DOE Patents (OSTI)

A method and apparatus for field weakening in PM machines uses field weakening coils (35, 44, 45, 71, 72) to produce flux in one or more stators (34, 49, 63, 64), including a flux which counters flux normally produced in air gaps between the stator(s) (34, 49, 63, 64) and the rotor (20, 21, 41, 61) which carries the PM poles. Several modes of operation are introduced depending on the magnitude and polarity of current in the field weakening coils (35, 44, 45, 71, 72). The invention is particularly useful for, but not limited to, the electric vehicle drives and PM generators.

Hsu, John S. (Oak Ridge, TN)

2000-01-01T23:59:59.000Z

473

Stator for Rotating Electrical Machine Having Multiple Controlwindings  

DOE Patents (OSTI)

A rotating electric machine is provided which includes multiple independent control windings for compensating for rotor imbalances and for levitating/centering the rotor. The multiple independent control windings are placed at different axial locations along the rotor to oppose forces created by imbalances at different axial locations along the rotor. The multiple control windings can also be used to levitate/center the rotor with a relatively small magnetic field per unit area since the rotor and/or the main power winding provides the biasfield.

Shah, Manoj R.; Lewandowski, Chad R.

1999-05-05T23:59:59.000Z

474

Prototyping Faithful Execution in a Java virtual machine.  

SciTech Connect

This report presents the implementation of a stateless scheme for Faithful Execution, the design for which is presented in a companion report, ''Principles of Faithful Execution in the Implementation of Trusted Objects'' (SAND 2003-2328). We added a simple cryptographic capability to an already simplified class loader and its associated Java Virtual Machine (JVM) to provide a byte-level implementation of Faithful Execution. The extended class loader and JVM we refer to collectively as the Sandia Faithfully Executing Java architecture (or JavaFE for short). This prototype is intended to enable exploration of more sophisticated techniques which we intend to implement in hardware.

Tarman, Thomas David; Campbell, Philip LaRoche; Pierson, Lyndon George

2003-09-01T23:59:59.000Z

475

TimesRoman-Roy Saltman REPORT88  

Science Conference Proceedings (OSTI)

... tallying using telephones or stations similar to automatic teller machines is ... a contest between Wayne Cogswell and incumbent T. Edward Lippy, for ...

2001-01-30T23:59:59.000Z

476

Machine tool accuracy characterization workshops. Final report, May 5, 1992--November 5 1993  

Science Conference Proceedings (OSTI)

The ability to assess the accuracy of machine tools is required by both tool builders and users. Builders must have this ability in order to predict the accuracy capability of a machine tool for different part geometry`s, to provide verifiable accuracy information for sales purposes, and to locate error sources for maintenance, troubleshooting, and design enhancement. Users require the same ability in order to make intelligent choices in selecting or procuring machine tools, to predict component manufacturing accuracy, and to perform maintenance and troubleshooting. In both instances, the ability to fully evaluate the accuracy capabilities of a machine tool and the source of its limitations is essential for using the tool to its maximum accuracy and productivity potential. This project was designed to transfer expertise in modern machine tool accuracy testing methods from LLNL to US industry, and to educate users on the use and application of emerging standards for machine tool performance testing.

NONE

1995-01-06T23:59:59.000Z

477

Methods, systems and apparatus for controlling operation of two alternating current (AC) machines  

SciTech Connect

A system is provided for controlling two alternating current (AC) machines via a five-phase PWM inverter module. The system comprises a first control loop, a second control loop, and a current command adjustment module. The current command adjustment module operates in conjunction with the first control loop and the second control loop to continuously adjust current command signals that control the first AC machine and the second AC machine such that they share the input voltage available to them without compromising the target mechanical output power of either machine. This way, even when the phase voltage available to either one of the machines decreases, that machine outputs its target mechanical output power.

Gallegos-Lopez, Gabriel (Torrance, CA); Nagashima, James M. (Cerritos, CA); Perisic, Milun (Torrance, CA); Hiti, Silva (Redondo Beach, CA)

2012-06-05T23:59:59.000Z

478

MACHINING TECHNIQUES AND PROCEDURES FOR URANIUM, GRAPHITE, TITANIUM, ZIRCONIUM, THORIUM, TANTALUM, BERYLLIUM, BISMUTH, LITHIUM, AND STELLITE  

SciTech Connect

Techniqnes are presented which are applicable in machining materinls such as U, graphite, Ti, Zr, Th, Ta, Be, Bi, Li, and stellite. Included in the general considerations are factors related to machinability of the materials, operating condition of the machines, and the condition of the cutting tools. In addition, industrial hygtene and safety aspects are examined. The techniques for each material are discussed in detail, the greatest attention being focused on uranium. (J.R.D.)

Davis, C.

1952-11-01T23:59:59.000Z

479

Method and system for controlling a synchronous machine over full operating range  

DOE Patents (OSTI)

System and method for controlling a synchronous machine are provided. The method allows for calculating a stator voltage index. The method further allows for relating the magnitude of the stator voltage index against a threshold voltage value. An offset signal is generated based on the results of the relating step. A respective state of operation of the machine is determined. The offset signal is processed based on the respective state of the machine.

Walters, James E. (Carmel, IN); Gunawan, Fani S. (Westfield, IN); Xue, Yanhong (Westfield, IN)

2002-01-01T23:59:59.000Z

480

Methods, systems and apparatus for synchronous current regulation of a five-phase machine  

DOE Patents (OSTI)

Methods, systems and apparatus are provided for controlling operation of and regulating current provided to a five-phase machine when one or more phases has experienced a fault or has failed. In one implementation, the disclosed embodiments can be used to synchronously regulate current in a vector controlled motor drive system that includes a five-phase AC machine, a five-phase inverter module coupled to the five-phase AC machine, and a synchronous current regulator.

Gallegos-Lopez, Gabriel; Perisic, Milun

2012-10-09T23:59:59.000Z

Note: This page contains sample records for the topic "goldberg machine contest" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

MACHINING TECHNIQUES AND PROCEDURES FOR URANIUM, GRAPHITE, TITANIUM, ZIRCONIUM, THORIUM, TANTALUM, BERYLLIUM, BISMUTH, LITHIUM, AND STELLITE  

SciTech Connect

Techniqnes are presented which are applicable in machining materinls such as U, graphite, Ti, Zr, Th, Ta, Be, Bi, Li, and stellite. Included in the general considerations are factors related to machinability of the materials, operating condition of the machines, and the condition of the cutting tools. In addition, industrial hygtene and safety aspects are examined. The techniques for each material are discussed in detail, the greatest attention being focused on uranium.

Davis, C.

1952-11-04T23:59:59.000Z

482

Environmental Analysis of Milling Machine Tool Use in Various Manufacturing Environments  

E-Print Network (OSTI)

United States’s total energy usage [2]. Machining is an areacould reduce the overall energy usage since HVAC is energy

Diaz, Nancy; Helu, Moneer; Jayanathan, Stephen; Chen, Yifen; Horvath, Arpad; Dornfeld, David

2010-01-01T23:59:59.000Z

483

The role of intelligent machines on the future battlefield, circa 2030.  

E-Print Network (OSTI)

??The application of Intelligent Machine (IM) technology to the battlefield in future has the potential to revolutionise warfare. Converging trends and incentives are propelling this… (more)

Morton, Ben Robert

2009-01-01T23:59:59.000Z

484

Evaluating trade-offs between sustainability, performance, and cost of green machining technologies  

E-Print Network (OSTI)

that begins with the load profile on the machine toolcomponents. Because these load profiles were difficultmultifunction I/O card. The load profile was generated using

Helu, Moneer

2012-01-01T23:59:59.000Z

485

Evaluating Trade-Offs Between Sustainability, Performance, and Cost of Green Machining Technologies  

E-Print Network (OSTI)

that begins with the load profile on the machine toolcomponents. Because these load profiles were difficultmultifunction I/O card. The load profile was generated using

Helu, Moneer; Rühl, Jan; Dornfeld, David; Werner, Patrick; Lanza, Gisela

2011-01-01T23:59:59.000Z

486

A test machine for investigation of the strength of thin sheet materials ...  

Science Conference Proceedings (OSTI)

PRODUCTION SECTION. A TEST MACHINE FOR INVESTIGATION OF THE STRENGTH OF THIN. SHEET ~IATERIALS IN BIAXIAL TENSION IN THE 20-300 ~.

487

Numerical Simulation of Earth Pressure on Head Chamber of Shield Machine with FEM  

SciTech Connect

Model parameters of conditioned soils in head chamber of shield machine are determined based on tree-axial compression tests in laboratory. The loads acting on tunneling face are estimated according to static earth pressure principle. Based on Duncan-Chang nonlinear elastic constitutive model, the earth pressures on head chamber of shield machine are simulated in different aperture ratio cases for rotating cutterhead of shield machine. Relationship between pressure transportation factor and aperture ratio of shield machine is proposed by using aggression analysis.

Li Shouju; Kang Chengang [State Key Laboratory of structural analysis for industrial equipment, Dalian University of Technology, Dalian 116023 (China); Sun, Wei [School of Mechanical Engineering, Dalian University of Technology, Dalian 116023 (China); Shangguan Zichang [School of Civil and Hydraulic Engineering, Dalian University of Technology, Dalian 116023 (China); Institute of Civil Engineering, Dalian Fishery University, Dalian 116023 (China)

2010-05-21T23:59:59.000Z

488

ACCELERATED AGING STUDY OF MACHINE WINDING INSULATION UNDER AC AND HIGH FREQUENCY PULSE VOLTAGE APPLICATION.  

E-Print Network (OSTI)

?? It is common practice to perform accelerated aging with 60 Hz ac to determine the lifetime characteristics of insulation used in the machine. Comparable… (more)

Chalise, Sajal Raj

2010-01-01T23:59:59.000Z

489

Energy Usage Evaluation and Condition Monitoring for Electric Machines using Wireless Sensor Networks.  

E-Print Network (OSTI)

??Energy usage evaluation and condition monitoring for electric machines are important in industry for overall energy savings. Traditionally these functions are realized only for large… (more)

Lu, Bin

2006-01-01T23:59:59.000Z

490

Decision Support System (DSS) for Machine Selection: A Cost Minimization Model  

E-Print Network (OSTI)

Within any manufacturing environment, the selection of the production or assembly machines is part of the day to day responsibilities of management. This is especially true when there are multiple types of machines that can be used to perform each assembly or manufacturing process. As a result, it is critical to find the optimal way to select machines when there are multiple related assembly machines available. The objective of this research is to develop and present a model that can provide guidance to management when making machine selection decisions of parallel, non-identical, related electronics assembly machines. A model driven Decision Support System (DSS) is used to solve the problem with the emphasis in optimizing available resources, minimizing production disruption, thus minimizing cost. The variables that affect electronics product costs are considered in detail. The first part of the Decision Support System was developed using Microsoft Excel as an interactive tool. The second part was developed through mathematical modeling with AMPL9 mathematical programming language and the solver CPLEX90 as the optimization tools. The mathematical model minimizes total cost of all products using a similar logic as the shortest processing time (SPT) scheduling rule. This model balances machine workload up to an allowed imbalance factor. The model also considers the impact on the product cost when expediting production. Different scenarios were studied during the sensitivity analysis, including varying the amount of assembled products, the quantity of machines at each assembly process, the imbalance factor, and the coefficient of variation (CV) of the assembly processes. The results show that the higher the CV, the total cost of all products assembled increased due to the complexity of balancing machine workload for a large number of products. Also, when the number of machines increased, given a constant number of products, the total cost of all products assembled increased because it is more difficult to keep the machines balanced. Similar results were obtained when a tighter imbalance factor was used.

Mendez Pinero, Mayra I.

2009-05-01T23:59:59.000Z

491

The Fluid Interface Reactions Structures and Transport (FIRST) EFRC (A "Life at the Frontiers of Energy Research" contest entry from the 2011 Energy Frontier Research Centers (EFRCs) Summit and Forum)  

DOE Green Energy (OSTI)

'The Fluid Interface Reactions Structures and Transport (FIRST) EFRC' was submitted by FIRST to the 'Life at the Frontiers of Energy Research' video contest at the 2011 Science for Our Nation's Energy Future: Energy Frontier Research Centers (EFRCs) Summit and Forum. Twenty-six EFRCs created short videos to highlight their mission and their work. FIRST, an EFRC directed by David J. Wesolowski at the Oak Ridge National Laboratory is a partnership of scientists from nine institutions: Oak Ridge National Laboratory (lead), Argonne National Laboratory, Drexel University, Georgia State University, Northwestern University, Pennsylvania State University, Suffolk University, Vanderbilt University, and University of Virginia. The Office of Basic Energy Sciences in the U.S. Department of Energy's Office of Science established the 46 Energy Frontier Research Centers (EFRCs) in 2009. These collaboratively-organized centers conduct fundamental research focused on 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The overall purpose is to accelerate scientific progress toward meeting the nation's critical energy challenges. The mission of Fluid Interface Reactions, Structures and Transport Center is 'to develop quantitative and predictive models of the unique nanoscale environment at fluid-solid interfaces that will enable transformational advances in electrical energy storage and heterogeneous catalysis for solar fuels.' Research topics are: catalysis (biomass, CO{sub 2}, water), electrocatalysis, photocatalysis, photoelectrocatalysis, solar fuels, solar electrodes, electrical energy storage, batteries, capacitors, battery electrodes, electrolytes, extreme environment, CO{sub 2} (convert), greenhouse gas, microelectromechanical systems (MEMS), interfacial characterization, matter by design, novel materials synthesis, and charge transport.

Wesolowski, David J. (Director, FIRST - Fluid Interface Reactions, Structures, and Transport Center); FIRST Staff

2011-05-01T23:59:59.000Z

492

Magical Seals, Secure Voting Machines, and Other Fantasies  

NLE Websites -- All DOE Office Websites (Extended Search)

Magical Seals, Magical Seals, Secure Voting Machines, and Other Fantasies Roger G. Johnston, Ph.D., CPP Jon S. Warner, Ph.D. Vulnerability Assessment Team! Argonne National Laboratory! ! ! 630-252-6168 rogerj@anl.gov http://www.ne.anl.gov/capabilities/vat! Invited Talk for the Election Verification Network Meeting, Chicago, March 24-26, 2011 Argonne National Laboratory ~$738 million annual budget 1500 acres, 3400 employees, 4400 facility users, 1500 students R&D and technical assistance for government & industry Sponsors * DHS * DoD * DOS * IAEA * Euratom * DOE/NNSA * private companies * intelligence agencies * public interest organizations The VAT has done detailed vulnerability assessments on hundreds of different security

493

DOE - Office of Legacy Management -- American Machine and Foundry Co -  

NLE Websites -- All DOE Office Websites (Extended Search)

Buffalo - NY 63 Buffalo - NY 63 FUSRAP Considered Sites Site: American Machine and Foundry Co - Buffalo (NY.63 ) Eliminated from further consideration under FUSRAP Designated Name: Not Designated Alternate Name: AMF NY.63-1 Location: Buffalo , New York NY.63-1 Evaluation Year: 1990 NY.63-1 Site Operations: Design engineering for the development of electrical and mechanical controls. NY.63-1 Site Disposition: Eliminated - Potential for radioactive contamination considered remote. Radioactive material, if any was used at the site, would have been limited to test quantities. NY.63-2 Radioactive Materials Handled: None Indicated - test quantities, if any NY.63-1 Primary Radioactive Materials Handled: None Indicated, But Could Have Included Test Quantities of Finished Uranium Metal NY.63-1

494

MACHINE PROTECTION SYSTEM FOR CONCURRENT OPERATION OF RHIC AND BLIP.  

SciTech Connect

The Brookhaven 200MeV linac is a multipurpose machine used to inject low intensity polarized protons for RHIC (Relativistic Heavy Ion Collider), as well as to inject high intensity protons to BLIP (Brookhaven Linac Isotope Producer), a medical isotope production facility. If high intensity protons were injected to RHIC by mistake, administrative radiation limits could be exceeded or sensitive electronics could be damaged. In the past, the changeover from polarized proton to high intensity proton operation has been a lengthy process, thereby never allowing the two programs to run simultaneously. To remedy this situation and allow concurrent operation of RHIC and BLIP, an active interlock system has been designed to monitor current levels in the AGS using two current transformers with fail safe circuitry and associated electronics to inhibit beam to RHIC if high intensity currents are detected.

WILINSKI, M.; BELLAVIA, S.; GLENN, J.W.; MAUSNER, L.F.; UNGER, K.L.

2005-05-16T23:59:59.000Z

495

LTC American`s, Inc. vacuum blasting machine: Baseline report  

Science Conference Proceedings (OSTI)

The LTC shot blast technology was tested and is being evaluated at Florida International University (FIU) as a baseline technology. In conjunction with FIU`s evaluation of efficiency and cost, this report covers the evaluation conducted for safety and health issues. It is a commercially available technology and has been used for various projects at locations throughout the country. The LTC 1073 Vacuum Blasting Machine uses a high-capacity, direct-pressure blasting system which incorporates a continuous feed for the blast media. The blast media cleans the surface within the contained brush area of the blast. It incorporates a vacuum system which removes dust and debris from the surface as it is blasted. The safety and health evaluation during the testing focused on two main areas of exposure: dust and noise.

NONE

1997-07-31T23:59:59.000Z

496

Machine Learning for Host-based Anomaly Detection by  

E-Print Network (OSTI)

Anomaly detection techniques complement signature based methods for intrusion detection. Machine learning approaches are applied to anomaly detection for automated learning and detection. Traditional host-based anomaly detectors model system call sequences to detect novel attacks. This dissertation makes four key contributions to detect host anomalies. First, we present an unsupervised approach to clean training data using novel representations for system call sequences. Second, supervised learning with system call arguments and other attributes is proposed for enriched modeling. Third, techniques to increase model coverage for improved accuracy are presented. Fourth, we propose spatio-temporal modeling to detect suspicious behavior for mobile hosts. Experimental results on various data sets indicate that our techniques are more effective than traditional methods in capturing attack-based host anomalies. Additionally, our supervised methods create succint models and the computational overhead incurred is reasonable for an online anomaly detection system. iii Acknowledgements An ancient saying in Sanskrit: Matri devo bhava (revere your mother), pitri devo

Gaurav Tandon; Gaurav Tandon; Philip K. Chan, Ph.D.; Marius C. Silaghi, Ph.D.; Georgios C. Anagnostopoulos, Ph.D.; Gaurav Tandon; Dissertation Advisor; Philip K. Chan, Ph.D.

2008-01-01T23:59:59.000Z

497

A new DFM approach to combine machining and additive manufacturing  

E-Print Network (OSTI)

Design For Manufacturing (DFM) approaches aim to integrate manufacturability aspects during the design stage. Most of DFM approaches usually consider only one manufacturing process, but products competitiveness may be improved by designing hybrid modular products, in which products are seen as 3-D puzzles with modules realized aside by the best manufacturing process and further gathered. A new DFM system is created in order to give quantitative information during the product design stage of which modules will benefit in being machined and which ones will advantageously be realized by an additive process (such as Selective Laser Sintering or laser deposition). A methodology for a manufacturability evaluation in case of a subtractive or an additive manufacturing process is developed and implemented in a CAD software. Tests are carried out on industrial products from automotive industry.

Kerbrat, Olivier; Hascoët, Jean-Yves; 10.1016/j.compind.2011.04.003

2011-01-01T23:59:59.000Z

498

Diamond Wire Saw for Precision Machining of Laser Target Components  

SciTech Connect

The fabrication of precision laser targets requires a wide variety of specialized mesoscale manufacturing techniques. The diamond wire saw developed in this study provides the capability to precisely section meso-scale workpieces mounted on the assembly stations used by the Target Fabrication Group. This new capability greatly simplifies the fabrication of many types of targets and reduces the time and cost required to build the targets. A variety of materials are used to fabricate targets, including metals, plastics with custom designed chemical formulas, and aerogels of various densities. The materials are usually provided in the form of small pieces or cast rods that must be machined to the required shape. Many of these materials, such as metals and some plastics, can be trimmed using a parting tool on a diamond turning machine. However, other materials, such as aerogels and brittle materials, cannot be adequately cut with a parting tool. In addition, the geometry of the parts often requires that the workpieces be held in a special assembly station, which excludes the use of a parting tool. In the past, these materials were sectioned using a small, handheld coping saw that used a diamond-impregnated wire as a blade. This miniature coping saw was effective, but it required several hours to cut through certain materials. Furthermore, the saw was guided by hand and often caused significant damage to fragile aerogels. To solve these problems, the diamond wire saw shown in Figure 1 was developed. The diamond wire saw is designed to machine through materials that are mounted in the Target Fabrication Group's benchtop assembly stations. These assembly stations are the primary means of aligning and assembling target components, and there is often a need to machine materials while they are mounted in the assembly stations. Unfortunately, commercially available saws are designed for very different applications and are far too large to be used with the assembly stations. Therefore, a custom diamond wire saw was designed and constructed. The diamond wire saw cuts through workpieces using a continuous loop of diamond-impregnated wire of length 840 mm. The wire loop runs around several idler pulleys and is driven by a simple geared DC motor that rotates at 17 rpm. The linear speed of the wire is 107 inches/minute. The saw is oriented at an angle of 20{sup o} from horizontal, so the operator can view the wire through the cutout at the front end of the saw. When looking through a microscope or camera with a horizontal line of sight, the operator can clearly see the wire as it cuts through the workpiece, as shown in the right side of Figure 1. The saw is mounted on a two-axis stage that allows the operator to align the wire with the workpiece. To cut through the workpiece, the operator drives the wire through the workpiece by turning the feed micrometer. An image of the interior of the diamond wire saw appears in Figure 2. This picture was taken after removing the protective cover plate from the saw.

Bono, M J; Bennett, D W

2005-08-08T23:59:59.000Z

499

MRC Psycholinguistic Database: Machine Usable Dictionary, Version 2.00.  

E-Print Network (OSTI)

The MRC machine usable dictionary contains 150837 words with up to 26 linguistic and psycholinguistic attributes for each. The attributes are from sources that are publicly available, but difficult to obtain and structure into a single dictionary. Three utility programs are described which permit the selection of words defined by a set of specified attribute values, and the attribute values for a set of specified words. These programs permit the construction of word sets for psycholinguistic experiments which control for the attributes specified in the dictionary. The dictionary may also be of use to researchers in artificial intelligence and computer science who require psychological and linguistic descriptions of words. - 2 - Those wishing to construct word sets as stimuli for psycholinguistic experiments must take into account a large number of characteristics of the words (see Cutler, 1981; Whaley, 1978). The Medical Research Council (MRC) Psycholinguistic Database version 1, was...

Michael Wilson; Michael Wilson; Oxon Ox Qx; Philip Quinlan

1987-01-01T23:59:59.000Z

500

Feasibility Studies of Alpha-Channeling in Mirror Machines  

SciTech Connect

The linear magnetic trap is an attractive concept both for fusion reactors and for other plasma applications due to its relative engineering simplicity and high-beta operation. Applying the ?- channeling technique to linear traps, such as mirror machines, can benefit this concept by efficiently redirecting ? particle energy to fuel ion heating or by otherwise sustaining plasma confinement, thus increasing the effective fusion reactivity. To identify waves suitable for ?-channeling a rough optimization of the energy extraction rate with respect to the wave parameters is performed. After the optimal regime is identified, a systematic search for modes with similar parameters in mirror plasmas is performed, assuming quasi-longitudinal or quasi-transverse wave propagation. Several modes suitable for ? particle energy extraction are identified for both reactor designs and for proof- of-principle experiments.

A. I. Zhmoginov and N. J. Fisch

2010-03-19T23:59:59.000Z