National Library of Energy BETA

Sample records for glazing system library

  1. Energy efficiency of a dynamic glazing system

    SciTech Connect (OSTI)

    Lollini, R.; Danza, L.; Meroni, I.

    2010-04-15

    The reduction of air-conditioning energy consumptions is one of the main indicators to act on when improving the energy efficiency in buildings. In the case of advanced technological buildings, a meaningful contribution to the thermal loads and the energy consumptions reduction could depend on the correct configuration and management of the envelope systems. In recent years, the architectural trend toward highly transparent all-glass buildings presents a unique challenge and opportunity to advance the market for emerging, smart, dynamic window and dimmable daylighting control technologies (). A prototype dynamic glazing system was developed and tested at ITC-CNR; it is aimed at actively responding to the external environmental loads. Both an experimental campaign and analyses by theoretical models were carried out, aimed at evaluating the possible configurations depending on different weather conditions in several possible places. Therefore, the analytical models of the building-plant system were defined by using a dynamic energy simulation software (EnergyPlus). The variables that determine the system performance, also influenced by the boundary conditions, were analysed, such as U- and g-value; they concern both the morphology of the envelope system, such as dimensions, shading and glazing type, gap airflow thickness, in-gap airflow rate, and management, in terms of control algorithm parameters tuning fan and shading systems, as a function of the weather conditions. The configuration able to provide the best performances was finally identified by also assessing such performances, integrating the dynamic system in several building types and under different weather conditions. The dynamic envelope system prototype has become a commercial product with some applications in facade systems, curtain walls and windows. The paper describes the methodological approach to prototype development and the main results obtained, including simulations of possible applications on

  2. Highly Insulating Glazing Systems using Non-Structural Center Glazing Layers

    SciTech Connect (OSTI)

    Kohler, Christian; Arasteh, Dariush; Goudey, Howdy; Kohler, Christian

    2008-04-09

    Three layer insulating glass units with two low-e coatings and an effective gas fill are known to be highly insulating, with center-of-glass U-factors as low as 0.57 W/m{sup 2}-K (0.10 Btu/h-ft{sup 2}- F). Such units have historically been built with center layers of glass or plastic which extend all the way through the spacer system. This paper shows that triple glazing systems with non-structural center layers which do not create a hermetic seal at the edge have the potential to be as thermally efficient as standard designs, while potentially removing some of the production and product integration issues that have discouraged the use of triples.

  3. Dynamic measurement of heat loss coefficients through Trombe wall glazing systems

    SciTech Connect (OSTI)

    Balcomb, J.D.

    1981-01-01

    A Trombe wall presents a unique opportunity to measure the heat-loss coefficient through the glazing system because the wall itself can be used as a heat meter. Since the instantaneous heat flux through the outer wall surface can be determined, the heat loss coefficient at night can be calculated by dividing by the wall surface-to-ambient temperature difference. This technique has been used to determine heat-loss coefficients for Los Alamos test rooms during the winter of 1980-1981. Glazing systems studied include single and double glazing both with and without night insulation used in conjunction with a flat black paint, and both single and double glazing used in conjunction with a selective surface.

  4. Optical properties database for high performance glazings. Task 12: Building energy analysis and design tools for solar applications, Subtask A.1: High-performance glazing

    SciTech Connect (OSTI)

    Reilly, S.; Selkowitz, S.; Winkelmann, F.

    1992-06-30

    The framework used for the data is described; maintain and updating the database is addressed; and covers extensions of the database are covered. The appendices include the glass library (Appendix A) and the glazing system library (Appendix B) which for the foundation of the optical property database, and a spectral data reporting format (Appendix C).

  5. Thermal insulated glazing unit

    DOE Patents [OSTI]

    Selkowitz, S.E.; Arasteh, D.K.; Hartmann, J.L.

    1988-04-05

    An improved insulated glazing unit is provided which can attain about R5 to about R10 thermal performance at the center of the glass while having dimensions about the same as those of a conventional double glazed insulated glazing unit. An outer glazing and inner glazing are sealed to a spacer to form a gas impermeable space. One or more rigid, non-structural glazings are attached to the inside of the spacer to divide the space between the inner and outer glazings to provide insulating gaps between glazings of from about 0.20 inches to about 0.40 inches. One or more glazing surfaces facing each thermal gap are coated with a low emissivity coating. Finally, the thermal gaps are filled with a low conductance gas such as krypton gas. 2 figs.

  6. Thermal insulated glazing unit

    DOE Patents [OSTI]

    Selkowitz, Stephen E. (Piedmont, CA); Arasteh, Dariush K. (Oakland, CA); Hartmann, John L. (Seattle, WA)

    1991-01-01

    An improved insulated glazing unit is provided which can attain about R5 to about R10 thermal performance at the center of the glass while having dimensions about the same as those of a conventional double glazed insulated glazing unit. An outer glazing and inner glazing are sealed to a spacer to form a gas impermeable space. One or more rigid, non-structural glazings are attached to the inside of the spacer to divide the space between the inner and outer glazings to provide insulating gaps between glazings of from about 0.20 inches to about 0.40 inches. One or more glazing surfaces facing each thermal gap are coated with a low emissivity coating. Finally, the thermal gaps are filled with a low conductance gas such as krypton gas.

  7. Predicted thermal performance of triple vacuum glazing

    SciTech Connect (OSTI)

    Fang, Yueping; Hyde, Trevor J.; Hewitt, Neil

    2010-12-15

    The simulated triple vacuum glazing (TVG) consists of three 4 mm thick glass panes with two vacuum gaps, with each internal glass surface coated with a low-emittance coating with an emittance of 0.03. The two vacuum gaps are sealed by an indium based sealant and separated by a stainless steel pillar array with a height of 0.12 mm and a pillar diameter of 0.3 mm spaced at 25 mm. The thermal transmission at the centre-of-glazing area of the TVG was predicted to be 0.26 W m{sup -2} K{sup -1}. The simulation results show that although the thermal conductivity of solder glass (1 W m{sup -1} K{sup -1}) and indium (83.7 W m{sup -1} K{sup -1}) are very different, the difference in thermal transmission of TVGs resulting from the use of an indium and a solder glass edge seal was 0.01 W m{sup -2} K{sup -1}. This is because the edge seal is so thin (0.12 mm), consequently there is a negligible temperature drop across it irrespective of the material that the seal is made from relative to the total temperature difference across the glazing. The results also show that there is a relatively large increase in the overall thermal conductance of glazings without a frame when the width of the indium edge seal is increased. Increasing the rebate depth in a solid wood frame decreased the heat transmission of the TVG. The overall heat transmission of the simulated 0.5 m by 0.5 m TVG was 32.6% greater than that of the 1 m by 1 m TVG, since heat conduction through the edge seal of the small glazing has a larger contribution to the total glazing heat transfer than that of the larger glazing system. (author)

  8. A Library of Basic System Functions

    Energy Science and Technology Software Center (OSTI)

    1995-06-01

    BASELIB is a support library for developing high-level library software. Its design is adaptable to other applications (utility routines, compilers, loaders, large application systems, etc.). BASELIB functions perform commonly-used system and I/O requests available in LTSS operating systems. BASELIB routines are machine dependent; they are closely tied to the machine and operating system for which they were programmed. However, an attempt was made to maintain compatibility and consistency across machines at the BASELIB calling levelmore » to provide a common base for moving large software systems across machines. It allows the programmer to structure higher level software in a machine independent fashion. Miscellaneous routines are included to perform character and string manipulation, number conversion, and output-file name generation.« less

  9. A Library of Basic System Functions

    Energy Science and Technology Software Center (OSTI)

    1995-06-01

    BASELIB is a support library for developing high-level library software. Its design is adaptable to other applications (utility routines, compilers, loaders, large application systems, etc.). BASELIB functions perform commonly-used system and I/O requests available in LTSS operating systems. BASELIB routines are machine-dependent; they are closely tied to the machine and operating system for which they were programmed. However, an attempt was made to maintain compatibility and consistency across machines at the BASELIB calling level tomore » provide a common base for moving large software systems across machines. It allows the programmer to structure higher-level software in a machine- independent fashion. Miscellaneous routines are included to perform character and string manipulation, number conversion, and output-file name generation.« less

  10. Energy and economic assessment of desiccant cooling systems coupled with single glazed air and hybrid PV/thermal solar collectors for applications in hot and humid climate

    SciTech Connect (OSTI)

    Beccali, Marco; Finocchiaro, Pietro; Nocke, Bettina

    2009-10-15

    This paper presents a detailed analysis of the energy and economic performance of desiccant cooling systems (DEC) equipped with both single glazed standard air and hybrid photovoltaic/thermal (PV/t) collectors for applications in hot and humid climates. The use of 'solar cogeneration' by means of PV/t hybrid collectors enables the simultaneous production of electricity and heat, which can be directly used by desiccant air handling units, thereby making it possible to achieve very energy savings. The present work shows the results of detailed simulations conducted for a set of desiccant cooling systems operating without any heat storage. System performance was investigated through hourly simulations for different systems and load combinations. Three configurations of DEC systems were considered: standard DEC, DEC with an integrated heat pump and DEC with an enthalpy wheel. Two kinds of building occupations were considered: office and lecture room. Moreover, three configurations of solar-assisted air handling units (AHU) equipped with desiccant wheels were considered and compared with standard AHUs, focusing on achievable primary energy savings. The relationship between the solar collector's area and the specific primary energy consumption for different system configurations and building occupation patterns is described. For both occupation patterns, sensitivity analysis on system performance was performed for different solar collector areas. Also, this work presents an economic assessment of the systems. The cost of conserved energy and the payback time were calculated, with and without public incentives for solar cooling systems. It is worth noting that the use of photovoltaics, and thus the exploitation of related available incentives in many European countries, could positively influence the spread of solar air cooling technologies (SAC). An outcome of this work is that SAC systems equipped with PV/t collectors are shown to have better performance in terms of

  11. Evacuated Window Glazing Research and Development: A Progress Report

    SciTech Connect (OSTI)

    Benson, D. K.; Tracy, C. E.; Jorgensen, G. J.

    1984-12-01

    This document summarizes progress during a nine-month period of an ongoing, exploratory research talk. The objective of the research is to evaluate the technical feasibility of a highly insulating, evacuated glazing for windows and other building apertures. Research includes engineering design and analysis of the glazing structure, materials development for its components, and the development of fabrication processes that could be used in the practical, mass production of such a glazing system. The targeted design performance goals are 70 percent solar weighted transmittance with less than 0.5 W/m2 K conductance (insulating R value greater than 12 F ft2 h/Btu) with an acceptable view quality.

  12. Fabricate-on-Demand Vacuum Insulating Glazings

    Broader source: Energy.gov [DOE]

    PPG is working to design a fabricate-on-demand process to overcome the cost and supply chain issues preventing widespread adoption of vacuum insulating glazings (VIGs).

  13. Control Systems Security Publications Library | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Control Systems Security Publications Library Control Systems Security Publications Library Publications Library Repository of documents, listed by topic. (Some of the documents in this section require Adobe Acrobat Reader. You can download a free copy of the Reader by visiting Adobe.) VULNERABILITY REPORTS PERIODICAL ARTICLES ENERGY SECTOR ROADMAP AND ROADMAP IMPLEMENTATION DOE NSTB PROGRAM PLANNING AND RESOURCE DOCUMENTS PROJECT FACT SHEETS TRAINING MATERIALS AND RECOMMENDED PRACTICES

  14. Advanced Information Systems Laboratory Crypto Library

    Energy Science and Technology Software Center (OSTI)

    2012-09-12

    AISL-CRYPTO is a library of cryptography functions supporting other AISL software. It provides various crypto functions for Common Lisp, including Digital Signature Algorithm, Data Encryption Standard, Secure Hash Algorithm, and public-key cryptography.

  15. Solar controlled glazing and method of producing glazing

    SciTech Connect (OSTI)

    Hartig, K.; Dietrich, A.; Scherer, M.

    1985-08-13

    Solar-controlled glazing having a transmission of between 5 and 40% in the visible spectrum range and having heat-reflection properties is produced by applying an oxide layer having an optical thickness of between 20 and 280 nm directly to a transparent substrate by cathodic evaporation in an oxygen-containing atmosphere to form a first layer. A chromium nitride layer having a geometric thickness of between 10 and 40 nm is then applied in an atmosphere consisting of inert gas and nitrogen to provide a second layer. An optical third dielectric layer may be applied to the second layer. The oxide layer is selected from oxides of tin, titanium and aluminium.

  16. Runtime System Library for Parallel Weather Modules

    Energy Science and Technology Software Center (OSTI)

    1997-07-22

    RSL is a Fortran-callable runtime library for use in implementing regular-grid weather forecast models, with nesting, on scalable distributed memory parallel computers. It provides high-level routines for finite-difference stencil communications and inter-domain exchange of data for nested forcing and feedback. RSL supports a unique point-wise domain-decomposition strategy to facilitate load-balancing.

  17. Simulation of complex glazing products; from optical data measurements to model based predictive controls

    SciTech Connect (OSTI)

    Kohler, Christian

    2012-08-01

    Complex glazing systems such as venetian blinds, fritted glass and woven shades require more detailed optical and thermal input data for their components than specular non light-redirecting glazing systems. Various methods for measuring these data sets are described in this paper. These data sets are used in multiple simulation tools to model the thermal and optical properties of complex glazing systems. The output from these tools can be used to generate simplified rating values or as an input to other simulation tools such as whole building annual energy programs, or lighting analysis tools. I also describe some of the challenges of creating a rating system for these products and which factors affect this rating. A potential future direction of simulation and building operations is model based predictive controls, where detailed computer models are run in real-time, receiving data for an actual building and providing control input to building elements such as shades.

  18. Convective heat transfer correlations for fenestration glazing cavities: A review

    SciTech Connect (OSTI)

    Zhao, Y.; Curcija, D.; Goss, W.P.

    1999-07-01

    Convective heat transfer in insulated glazing unit (IGU) cavities is a major component of the overall heat transfer in fenestration systems. Accurately quantifying the heat-transfer coefficient within the cavity is of great significance in calculating the center-of-glass U factor, the edge-of-glass U factor, and therefore the overall U factor. Over the past 40 years, along with the rapid development of experimental techniques and numerical methods as well as the powerful computer systems, the heat-transfer correlations have been updated either from experimental data or from numerical data from time to time. The literature reviewed here covers correlations based on simplified analytical studies, on the experimental data, and on the numerical results. In addition, most of the correlation equations cover the typical design range of fenestration glazing cavities, e.g., Ra < 20,000. Inconsistencies and discrepancies existing between different experimental observations, and between derived numerical/analytical correlations and available experimental data, are discussed.

  19. Evaluation of solar heat gain coefficient for solar-control glazings and shading devices

    SciTech Connect (OSTI)

    Harrison, S.J.; Wonderen, S.J. van

    1998-10-01

    The determination of solar heat gain coefficient (SHGC) values for complex fenestration systems is required to evaluate building energy performance, to estimate peak electrical loads, and to ensure occupant comfort. In the past, simplified techniques have been used to calculate the values of SHGC for fenestration systems. As glazing systems that incorporate complex geometries become more common, test methods are required to evaluate these products and to aid in the development of new computational tools. Recently, a unique facility and test method for the experimental determination of SHGC values were developed and demonstrated for simple fenestration systems. The study described in this paper further applies this method to a variety of commercially available glazing and shading systems (e.g., heat-absorbing insulated glazing units (IGUs), reflective film and suspended film IGUs), and shading devices (i.e., slat blinds and shades). Testing was conducted in a solar simulator facility using a specially designed window calorimeter. The results of this study demonstrate the feasibility of the solar simulator-based test method for the evaluation of SHGC values for solar-control glazings and shading devices.

  20. Low-cost solar collectors using thin-film plastics absorbers and glazings

    SciTech Connect (OSTI)

    Wilhelm, W.G.

    1980-01-01

    The design, fabrication, performance, cost, and marketing of flat plate solar collectors using plastic absorbers and glazings are described. Manufacturing cost breakdowns are given for single-glazed and double-glazed collectors. (WHK)

  1. Apparatus for preventing high temperatures in a glazed solar collector

    DOE Patents [OSTI]

    Buckley, Bruce S.

    1979-01-01

    Venting the glazing (i.e., transparent cover) of a solar collector can be used to prevent the collector's absorber surface from reaching too high a temperature.

  2. Fabricate-on-Demand Vacuum Insulating Glazings | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to enable wide-spread adoption of highly-insulating vacuum insulating glazings (VIG). ... mechanical robustness to improve product yield and increase service life, lowers capital ...

  3. Description of Transmutation Library for Fuel Cycle System Analyses

    SciTech Connect (OSTI)

    Steven J. Piet; Samuel E. Bays; Edward A. Hoffman

    2010-08-01

    This report documents the Transmutation Library that is used in Fuel Cycle System Analyses. This version replaces the 2008 version.[Piet2008] The Transmutation Library has the following objectives: • Assemble past and future transmutation cases for system analyses. • For each case, assemble descriptive information such as where the case was documented, the purpose of the calculation, the codes used, source of feed material, transmutation parameters, and the name of files that contain raw or source data. • Group chemical elements so that masses in separation and waste processes as calculated in dynamic simulations or spreadsheets reflect current thinking of those processes. For example, the CsSr waste form option actually includes all Group 1A and 2A elements. • Provide mass fractions at input (charge) and output (discharge) for each case. • Eliminate the need for either “fission product other” or “actinide other” while conserving mass. Assessments of waste and separation cannot use “fission product other” or “actinide other” as their chemical behavior is undefined. • Catalog other isotope-specific information in one place, e.g., heat and dose conversion factors for individual isotopes. • Describe the correlations for how input and output compositions change as a function of UOX burnup (for LWR UOX fuel) or fast reactor (FR) transuranic (TRU) conversion ratio (CR) for either FR-metal or FR-oxide. This document therefore includes the following sections: • Explanation of the data set information, i.e., the data that describes each case. In no case are all of the data presented in the Library included in previous documents. In assembling the Library, we return to raw data files to extract the case and isotopic data, into the specified format. • Explanation of which isotopes and elements are tracked. For example, the transition metals are tracked via the following: two Zr isotopes, Zr-other, Tc99, Tc-other, two Mo-Ru-Rh-Pd isotopes, Mo

  4. Scalable Library for the Parallel Solution of Sparse Linear Systems

    Energy Science and Technology Software Center (OSTI)

    1993-07-14

    BlockSolve is a scalable parallel software library for the solution of large sparse, symmetric systems of linear equations. It runs on a variety of parallel architectures and can easily be ported to others. BlockSovle is primarily intended for the solution of sparse linear systems that arise from physical problems having multiple degrees of freedom at each node point. For example, when the finite element method is used to solve practical problems in structural engineering, eachmore » node will typically have anywhere from 3-6 degrees of freedom associated with it. BlockSolve is written to take advantage of problems of this nature; however, it is still reasonably efficient for problems that have only one degree of freedom associated with each node, such as the three-dimensional Poisson problem. It does not require that the matrices have any particular structure other than being sparse and symmetric. BlockSolve is intended to be used within real application codes. It is designed to work best in the context of our experience which indicated that most application codes solve the same linear systems with several different right-hand sides and/or linear systems with the same structure, but different matrix values multiple times.« less

  5. Recent Developments of the Modelica"Buildings" Library for Building Energy and Control Systems

    SciTech Connect (OSTI)

    Wetter, Michael; Zuo, Wangda; Nouidui, Thierry Stephane

    2011-04-01

    At the Modelica 2009 conference, we introduced the Buildings library, a freely available Modelica library for building energy and control systems. This paper reports the updates of the library and presents example applications for a range of heating, ventilation and air conditioning (HVAC) systems. Over the past two years, the library has been further developed. The number of HVAC components models has been doubled and various components have been revised to increase numerical robustness.The paper starts with an overview of the library architecture and a description of the main packages. To demonstrate the features of the Buildings library, applications that include multizone airflow simulation as well as supervisory and local loop control of a variable air volume (VAV) system are briefly described. The paper closes with a discussion of the current development.

  6. Other Libraries

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Bernalillo County Libraries New Mexico State Library Academic libraries: NMSU Library New Mexico Tech Library Northern New Mexico College Library UNM Libraries US and World...

  7. Research Library

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    For more resources see the Reports page. First try: IHS Standards Expert login more ... Library Catalog Los Alamos Authors Los Alamos Research Online Review & Approval System ...

  8. Library Training

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Library Training Library Training Get Library Training... Request Training 667-5809 Email This service is limited to lab employees with active Z numbers. Scholarly Communication & Public Access Learn about the Review & Approval System for Scientific and Technical information (RASSTI) system to obtain LA-UR numbers for unclassified, unrestricted documents intended for public release; Accepted manuscripts, and Copyright. Searching Los Alamos Authors Database Improve your searching skills

  9. Method and apparatus for an insulating glazing unit and compliant seal for an insulating glazing unit

    DOE Patents [OSTI]

    Francis, IV, William H.; Freebury, Gregg E.; Beidleman, Neal J.; Hulse, Michael

    2016-05-03

    A Vacuum Insulating Glazing Unit (VIGU) comprises two or more glass lites (panes) spaced apart from one another and hermetically bonded to an edge seal assembly therebetween. The resulting cavity between the lites is evacuated to create at least one insulating vacuum cavity within which are disposed a plurality of stand-off members to maintain separation between the lites. The edge seal assembly is preferably compliant in the longitudinal (i.e., edgewise) direction to allow longitudinal relative motion between the two lites (e.g., from thermal expansion). The longitudinal compliance may be obtained by imprinting a three-dimensional pattern into the edge seal material. The edge seal assembly is preferably bonded to the lites with a first bond portion that is hermetic and a second bond portion that is load-resistant. Methods for producing VIGUs and/or compliant edge seal assemblies and VIGU and edge seal apparatus are disclosed.

  10. Modelica Library for Building Heating, Ventilation and Air-Conditioning Systems

    SciTech Connect (OSTI)

    Wetter, Michael

    2009-06-17

    This paper presents a freely available Modelica library for building heating, ventilation and air conditioning systems. The library is based on the Modelica.Fluid library. It has been developed to support research and development of integrated building energy and control systems. The primary applications are controls design, energy analysis and model-based operation. The library contains dynamic and steady-state component models that are applicable for analyzing fast transients when designing control algorithms and for conducting annual simulations when assessing energy performance. For most models, dimensional analysis is used to compute the performance for operating points that differ from nominal conditions. This allows parameterizing models in the absence of detailed geometrical information which is often impractical to obtain during the conceptual design phase of building systems. In the first part of this paper, the library architecture and the main classes are described. In the second part, an example is presented in which we implemented a model of a hydronic heating system with thermostatic radiator valves and thermal energy storage.

  11. Gas impermeable glaze for sealing a porous ceramic surface

    DOE Patents [OSTI]

    Reed, Scott T.; Stone, Ronald G.; Nenoff, Tina M.; Trudell, Daniel E.; Thoma, Steven G.

    2004-04-06

    A process for fabricating a gas impermeable seal on a porous ceramic surface using a thin, glass-based, pinhole free glaze. The process can be used to fabricate gas impermeable end seals on porous alumina tubes used as filter media. The porous alumina tubes can have an inorganic microporous thin film separation membrane on the inner surface, which can be used for high temperature gas separation processes.

  12. Seasonal control skylight glazing panel with passive solar energy switching

    SciTech Connect (OSTI)

    Miller, J.V.

    1983-10-25

    A substantially transparent one-piece glazing panel is provided for generally horizontal mounting in a skylight. The panel is comprised of an repeated pattern of two alternating and contiguous linear optical elements; a first optical element being an upstanding generally right-triangular linear prism, and the second optical element being an upward-facing plano-cylindrical lens in which the planar surface is reflectively opaque and is generally in the same plane as the base of the triangular prism.

  13. Fourier analysis of conductive heat transfer for glazed roofing materials

    SciTech Connect (OSTI)

    Roslan, Nurhana Lyana; Bahaman, Nurfaradila; Almanan, Raja Noorliyana Raja; Ismail, Razidah; Zakaria, Nor Zaini

    2014-07-10

    For low-rise buildings, roof is the most exposed surface to solar radiation. The main mode of heat transfer from outdoor via the roof is conduction. The rate of heat transfer and the thermal impact is dependent on the thermophysical properties of roofing materials. Thus, it is important to analyze the heat distribution for the various types of roofing materials. The objectives of this paper are to obtain the Fourier series for the conductive heat transfer for two types of glazed roofing materials, namely polycarbonate and polyfilled, and also to determine the relationship between the ambient temperature and the conductive heat transfer for these materials. Ambient and surface temperature data were collected from an empirical field investigation in the campus of Universiti Teknologi MARA Shah Alam. The roofing materials were installed on free-standing structures in natural ventilation. Since the temperature data are generally periodic, Fourier series and numerical harmonic analysis are applied. Based on the 24-point harmonic analysis, the eleventh order harmonics is found to generate an adequate Fourier series expansion for both glazed roofing materials. In addition, there exists a linear relationship between the ambient temperature and the conductive heat transfer for both glazed roofing materials. Based on the gradient of the graphs, lower heat transfer is indicated through polyfilled. Thus polyfilled would have a lower thermal impact compared to polycarbonate.

  14. Glazing materials for solar and architectural applications. Final report

    SciTech Connect (OSTI)

    Lampert, C.M.

    1994-09-01

    This report summarizes five collaborative research projects on glazings performed by participants in Subtask C of IEA Solar Heating and Cooling Programme (SHC) Task 10, Materials Research and Testing. The projects include materials characterization, optical and thermal measurements, and durability testing of several types of new glazings Three studies were completed on electrochromic and dispersed liquid crystals for smart windows, and two were completed for low-E coatings and transparent insulation materials for more conventional window and wall applications. In the area of optical switching materials for smart windows, the group developed more uniform characterization parameters that are useful to determine lifetime and performance of electrochromics. The detailed optical properties of an Asahi (Japan) prototype electrochromic window were measured in several laboratories. A one square meter array of prototype devices was tested outdoors and demonstrated significant cooling savings compared to tinted static glazing. Three dispersed liquid crystal window devices from Taliq (USA) were evaluated. In the off state, these liquid crystal windows scatter light greatly. When a voltage of about 100 V ac is applied, these windows become transparent. Undyed devices reduce total visible light transmittance by only .25 when switched, but this can be increased to .50 with the use of dyed liquid crystals. A wide range of solar-optical and emittance measurements were made on low-E coated glass and plastic. Samples of pyrolytic tin oxide from Ford glass (USA) and multilayer metal-dielectric coatings from Interpane (Germany) and Southwall (USA) were evaluated. In addition to optical characterization, the samples were exposure-tested in Switzerland. The thermal and optimal properties of two different types of transparent insulation materials were measured.

  15. Flexible edge seal for vacuum insulating glazing units

    DOE Patents [OSTI]

    Bettger, Kenneth J.; Stark, David H.

    2012-12-11

    A flexible edge seal is provided for a vacuum insulating glazing unit having a first glass pane and a second glass pane spaced-apart from the first. The edge seal comprises a seal member formed of a hermetically bondable material and having a first end, a second end and a center section disposed therebetween. The first end is hermetically bondable to a first glass pane. The second end is hermetically bondable to a second glass pane. The center section comprises a plurality of convolutes.

  16. Method and system for gathering a library of response patterns for sensor arrays

    DOE Patents [OSTI]

    Zaromb, Solomon

    1992-01-01

    A method of gathering a library of response patterns for one or more sensor arrays used in the detection and identification of chemical components in a fluid includes the steps of feeding samples of fluid with time-spaced separation of known components to the sensor arrays arranged in parallel or series configurations. Modifying elements such as heating filaments of differing materials operated at differing temperatures are included in the configurations to duplicate operational modes designed into the portable detection systems with which the calibrated sensor arrays are to be used. The response patterns from the known components are collected into a library held in the memory of a microprocessor for comparison with the response patterns of unknown components.

  17. Shared and Dynamic Libraries

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Shared and Dynamic Libraries Shared and Dynamic Libraries The Edison system can support applications that use dynamic shared libraries (DSL) on the compute nodes. Some "out-of-the-box" applications require DSLs and some popular applications like Python use DSLs as well. Using System Shared and Dynamic Libraries "System" DSLs include those that support software packages found in "typical" Linux distributions, e.g. Python and Perl. To build an application that will

  18. Shared and Dynamic Libraries

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Shared and Dynamic Libraries Shared and Dynamic Libraries The Hopper system can support applications that use dynamic shared libraries (DSL) on the compute nodes. Some "out-of-the-box" applications require DSLs and some popular applications like Python use DSLs as well. Using System Shared and Dynamic Libraries "System" DSLs include those that support software packages found in "typical" Linux distributions, e.g. Python and Perl. To build an application that will

  19. Programming Libraries

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Math Libraries ACML FFTW GNU Science Library (GSL) LAPACK LibSci Math Kernel Library (MKL) NAG PETSc PSPLINE ScaLAPACK SLEPc SPRNG TPSL Trilinos List of Math Libraries List of ...

  20. Shared and Dynamic Libraries

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Some "out-of-the-box" applications require DSLs and some popular applications like Python use DSLs as well. Using System Shared and Dynamic Libraries "System" DSLs include...

  1. Improvements in transport calculations by the optimized multigroup libraries for fast neutron systems

    SciTech Connect (OSTI)

    Mosca, P.; Mounier, C.; Bellier, P.; Zmijarevic, I.

    2012-07-01

    This paper shows how to improve the accuracy of the transport calculations using in the APOLLO2 code the optimized multigroup libraries calculated by AEMC for fast neutron systems. These ameliorations concern the fission source calculation and the self-shielding models. The calculation of the fission source was generalized to fission spectra including an incident neutron energy dependence. The subgroup self-shielding model was updated for a mixture of resonant nuclides. Some tests on a Pu-239 sphere without reflectors and a fast sodium cell show that the use of four fission spectra guarantees a correct representation of the fission source. The test on a Pu-239 sphere with a thick steel reflector proves that the subgroup self-shielding, accounting for the mutual shielding of several resonant nuclides, allows us to improve the accuracy of the neutron transport solution in the reflector. (authors)

  2. Vacuum window glazings for energy-efficient buildings

    SciTech Connect (OSTI)

    Benson, D.K.; Smith, L.K.; Tracy, C.E.; Potter, T.; Christensen, C. ); Soule, D.E. )

    1990-05-01

    The technical feasibility of a patented, laser-welded, evacuated insulating window was studied. The window has two edge-sealed sheets of glass separated by 0.5-mm glass spheres spaced 30 mm apart in a regular array. A highly insulating frame is required and several designs were analyzed. The vacuum window's combination of high solar transmittance and low thermal conductance makes it superior to many other windows in cold climates. In the US Pacific Northwest, the vacuum window could save about 6 MJ of heating energy annually per square meter of window in comparison to conventional, double-glazed windows. A large, vacuum laser-welding facility was designed and installed to conduct glass welding experiments and to fabricate full-sized vacuum windows. Experiments confirmed the feasibility of laser-sealing glass in vacuum but identified two difficulties. Under some circumstances, bubbles of dissolved gases form during welding and weaken the seal. Glass also vaporizes and contaminates the laser beam steering mirror. A novel moving metal foil mirror was developed to circumvent the contamination problem, but it has not yet been used to complete welding experiments and fabricate full-sized vacuum windows. 63 refs., 53 figs., 19 tabs.

  3. Library - JCAP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0 Library Hero Image.JPG Library Research Introduction Thrusts Library Resources Research Introduction Why Solar Fuels? Goals & Objectives Thrusts Thrust 1 Thrust 2 Thrust 3 Thrust 4 Library Publications Research Highlights Videos Resources User Facilities Expert Team Benchmarking Database Device Simulation Tool XPS Spectral Database JCAP library of Publications, research highlights and videos publications solarfuels1.jpg solarfuels1.jpg research highlights research videos

  4. Prediction of the multicellular flow regime of natural convection in fenestration glazing cavities

    SciTech Connect (OSTI)

    Zhao, Y.; Goss, W.P.; Curcija, D.

    1997-12-31

    In this work, gas-filled tall rectangular cavities, typically found in insulating glazing units (IGUs) of fenestration systems, with constant temperatures at the side walls and zero heat flux at the top and bottom, were investigated. Critical Rayleigh numbers, Ra{sub c}, at which multicellular flow begins to form were determined for aspect ratios from 10.7 to 80. Using a general-purpose fluid flow and heat transfer finite-element analysis computer program (FDI 1993), numerical calculations were performed over the range of aspect ratios, A, from 10 to 80 with Rayleigh numbers, Ra, varying within the laminar flow regime. The calculations revealed that for aspect ratios between 10.7 and 30, the multicellular flow pattern dies out before the flow enters the turbulent flow regime. In addition, the lowest aspect ratio at which multicellular flow patterns existed was 10.7, which is lower than the lowest limit (A = 12) published by other researchers. The resulting critical Rayleigh numbers are plotted on a graph as a function of the aspect ratio and the Rayleigh numbers. The overall heat transfer results in terms of the average, or integrated, Nusselt numbers, Nu, are compared with available numerical and experimental data on multicellular flow in rectangular cavities, and good agreement was found. Also, streamline contour plots and temperature profiles are plotted for selected cases.

  5. Library Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Services Library Services The Research Library provides many services to LANL employees. We also offer limited services to members of the public. The Research Library is open to the public Monday-Friday, 9am to 4pm. Circulation The Research Library provides a large collection of print and electronic books, journals, reports, conference proceedings and many audio/visual materials. See the Circulation page for more information on circulation guidelines. Photocopies and Document Delivery The

  6. Research Library

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Guides Video Tutorials Mobile Resources Alerts Bibliographic Management Scholarly Communication & Open Access Copyright Open Access ORCID Primo LANL Research Library: delivering essential knowledge services for national security sciences since 1947 About the Research Library Mission We deliver agile, responsive knowledge services, connecting people with information, technology and resources. Vision Essential knowledge services for national security sciences. The Research Library provides

  7. Recovery Act: Electrochromic Glazing Technology: Improved Performance, Lower Price

    SciTech Connect (OSTI)

    Burdis, Mark; Sbar, Neil

    2012-06-30

    The growing dependency of the US on energy imports and anticipated further increases in energy prices reinforce the concerns about meeting the energy demand in the future and one element of a secure energy future is conservation. It is estimated that the buildings sector represents 40% of the US's total energy consumption. And buildings produce as much as one third of the greenhouse gas emissions primarily through fossil fuel usage during their operational phase. A significant fraction of this energy usage is simply due to inefficient window technology. Electrochromic (EC) windows allow electronic control of their optical properties so that the transparency to light can be adjusted from clear to dark. This ability to control the amount of solar energy allowed into the building can be advantageously used to minimize lighting, heating and air conditioning costs. Currently, the penetration of EC windows into the marketplace is extremely small, and consequently there is a huge opportunity for energy savings if this market can be expanded. In order to increase the potential energy savings it is necessary to increase the quantity of EC windows in operation. Additionally, any incremental improvement in the energy performance of each window will add to the potential energy savings. The overall goals of this project were therefore to improve the energy performance and lower the cost of dynamic (EC) smart windows for residential and commercial building applications. This project is obviously of benefit to the public by addressing two major areas: lowering the cost and improving the energy performance of EC glazings. The high level goals for these activities were: (i) to improve the range between the clear and the tinted state, (ii) reduce the price of EC windows by utilizing lower cost materials, (iii) lowering the U-Value1 SAGE Electrochromics Inc. is the only company in the US which has a track record of producing EC windows, and presently has a small operational factory

  8. Library | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Library Library The Office of Electricity Delivery and Energy Reliability (OE) leads the Department of Energy's efforts to ensure a resilient, reliable, and flexible electricity system. Below are links to OE's Federal Register notices, a wide range of reports and other documents, fact sheets, and peer review materials. Federal Register Notices Federal Register Notices (FRNs) are published in compliance with government regulation to inform the public of announcements, meetings, applications, and

  9. Callpath Library

    Energy Science and Technology Software Center (OSTI)

    2013-11-09

    The "Callpath Library" is a software abstraction layer over a number of stack tracing utilities. It allows tool develoopers to conveniently represent and mNipulate call paths gathered fro U. Wisconsin's Stackwalker API and GNU Backtrace.

  10. Reduction in Vehicle Temperatures and Fuel Use from Cabin Ventilation, Solar-Reflective Paint, and a New Solar-Reflective Glazing

    SciTech Connect (OSTI)

    Rugh, J.; Chaney, L.; Meyer, J.; Rustagi, M.; Olson, K.; Kogler, R.

    2007-05-01

    An analysis to determine the impact of reducing the thermal load on a vehicle using solar-reflective paint and glazing.

  11. MTV Utility Library

    Energy Science and Technology Software Center (OSTI)

    2008-02-29

    The MSV Java Utility Library contains software developed over many years for many sponsors. (This work is not a derivative of CB-EMIS), but rather support to the CB-EMIS software). Projects that have used and contributed to code in this library: CB-EMIS (PROTECT), BWIC, Fort Future, Teva, Integrated Oceans, ENKIMDU, RCW, JEMS, JWACS, EPA watershed, and many others. This library will continue to be used in other non-CB-EMIS related projects. The components include: Spatial components: Multi-coordinatemore » system spatial objects. 2D spatial indexing system, and polygon griding system. Data translation: Allows import and export of file based data to and from object oriented systems. Multi-platform data streams: Allows platform specific data streams to operate on any support platform. Other items include printing, custom GUI components, support for NIMA Raster Product Format, program logging utilities and others.« less

  12. Using High Performance Libraries and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    High Performance Libraries and Tools Using High Performance Libraries and Tools Memkind Library on Edison The memkind library is a user extensible heap manager built on top of jemalloc which enables control of memory characteristics and a partitioning of the heap between kinds of memory (including user defined kinds of memory). This library can be used to simulate the benefit of the high bandwidth memory that will be available on KNL system on the dual socket Edison compute nodes (the two

  13. Public Library.

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    d 1 Greet the metal turtles at the Mesa Public Library. 2 Take a tour of public art. 3 Start from Ashley Pond and find the smart house. 4 Test your electric personality at the Bradbury Science Museum. 5 Sit a spell in the Romero Cabin. 6 Walk the Rim Trail. 7 Dress up the Oppie and Groves statues. 8 Attend a Gordon's concert. 9 Put together a team for the mud volleyball tournament. 10 Hear authors speak or attend a gallery opening at Mesa Public Library. 11 Hike to the Cave Of The Winds. 12 Join

  14. I/O-Libraries

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    I/O-Libraries I/O-Libraries IO-Libraries Last edited: 2016-04-29 11:35:16

  15. Universities & Libraries | OSTI, US Dept of Energy, Office of...

    Office of Scientific and Technical Information (OSTI)

    research departments and libraries across the nation to increase awareness of DOE's valuable scientific and technical information. Library Tools DOE MARC Records System Open ...

  16. Commercialization Plan Support for Development of Low Cost Vacuum Insulating Glazing: Cooperative Research and Development Final Report, CRADA Number CRD-11-449

    SciTech Connect (OSTI)

    Dameron, Arrelaine

    2015-07-09

    During the duration of this CRADA, V-Glass and NREL will partner in testing, analysis, performance forecasting, costing, and evaluation of V-Glass’s GRIPWELD™ process technology for creating a low cost hermetic seal for conventional and vacuum glazing. Upon successful evaluation of hermeticity, V-Glass’s GRIPWELD™ will be evaluated for its potential use in highly insulating window glazing.

  17. Preparation of Nucleic Acid Libraries for Personalized Sequencing Systems Using an Integrated Microfluidic Hub Technology (Seventh Annual Sequencing, Finishing, Analysis in the Future (SFAF) Meeting 2012)

    ScienceCinema (OSTI)

    Patel, Kamlesh D [Ken]; SNL,

    2013-01-25

    Kamlesh (Ken) Patel from Sandia National Laboratories (Livermore, California) presents "Preparation of Nucleic Acid Libraries for Personalized Sequencing Systems Using an Integrated Microfluidic Hub Technology " at the 7th Annual Sequencing, Finishing, Analysis in the Future (SFAF) Meeting held in June, 2012 in Santa Fe, NM.

  18. Modelica buildings library

    SciTech Connect (OSTI)

    Wetter, Michael; Zuo, Wangda; Nouidui, Thierry S.; Pang, Xiufeng

    2013-03-13

    This paper describes the Buildings library, a free open-source library that is implemented in Modelica, an equation-based object-oriented modeling language. The library supports rapid prototyping, as well as design and operation of building energy and control systems. First, we describe the scope of the library, which covers HVAC systems, multi-zone heat transfer and multi-zone airflow and contaminant transport. Next, we describe differentiability requirements and address how we implemented them. We describe the class hierarchy that allows implementing component models by extending partial implementations of base models of heat and mass exchangers, and by instantiating basic models for conservation equations and flow resistances. We also describe associated tools for pre- and post-processing, regression tests, co-simulation and real-time data exchange with building automation systems. Furthermore, the paper closes with an example of a chilled water plant, with and without water-side economizer, in which we analyzed the system-level efficiency for different control setpoints.

  19. Library of Continuation Algorithms

    Energy Science and Technology Software Center (OSTI)

    2005-03-01

    LOCA (Library of Continuation Algorithms) is scientific software written in C++ that provides advanced analysis tools for nonlinear systems. In particular, it provides parameter continuation algorithms. bifurcation tracking algorithms, and drivers for linear stability analysis. The algorithms are aimed at large-scale applications that use Newton’s method for their nonlinear solve.

  20. Modelica buildings library

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Wetter, Michael; Zuo, Wangda; Nouidui, Thierry S.; Pang, Xiufeng

    2013-03-13

    This paper describes the Buildings library, a free open-source library that is implemented in Modelica, an equation-based object-oriented modeling language. The library supports rapid prototyping, as well as design and operation of building energy and control systems. First, we describe the scope of the library, which covers HVAC systems, multi-zone heat transfer and multi-zone airflow and contaminant transport. Next, we describe differentiability requirements and address how we implemented them. We describe the class hierarchy that allows implementing component models by extending partial implementations of base models of heat and mass exchangers, and by instantiating basic models for conservation equations andmore » flow resistances. We also describe associated tools for pre- and post-processing, regression tests, co-simulation and real-time data exchange with building automation systems. Furthermore, the paper closes with an example of a chilled water plant, with and without water-side economizer, in which we analyzed the system-level efficiency for different control setpoints.« less

  1. Spatial Knowledge Capture Library

    Energy Science and Technology Software Center (OSTI)

    2005-05-16

    The Spatial Knowledge Capture Library is a set of algorithms to capture regularities in shapes and trajectories through space and time. We have applied Spatial Knowledge Capture to model the actions of human experts in spatial domains, such as an AWACS Weapons Director task simulation. The library constructs a model to predict the expert’s response to sets of changing cues, such as the movements and actions of adversaries on a battlefield, The library includes amore » highly configurable feature extraction functionality, which supports rapid experimentation to discover causative factors. We use k-medoid clustering to group similar episodes of behavior, and construct a Markov model of system state transitions induced by agents’ actions.« less

  2. Milwaukee Public Library Goes Solar

    Broader source: Energy.gov [DOE]

    This photograph features the 132-panel rooftop photovoltaic (PV) system installed by the Milwaukee Public Library. The array was installed during an upgrade to the 120-year-old building’s roof. The...

  3. Low-vacuum SEM analyses of ceramic tiles with emphasis on glaze defects characterisation

    SciTech Connect (OSTI)

    Kopar, Tinkara Ducman, Vilma

    2007-11-15

    The behaviour of glazed building ceramics exposed to different environment (weathering, chemicals, etc.) is determined by microstructural features; in many cases structural and surface defects at the micro- or nanometre scale are crucial for the functional properties of products. Many testing methods for materials characterization of a variety of ceramic products, physical and chemical methods, are time-consuming, large quantities of samples are needed, and are usually destructive. This paper illustrates the use of low-vacuum scanning electron microscopy (LV-SEM) as fast and almost non-destructive, as only a small amount of sample is needed. Examples are given of various surface and structural properties of building ceramics, for the identification of the material deterioration process as a result of environmental impact.

  4. Evaluated teletherapy source library

    DOE Patents [OSTI]

    Cox, Lawrence J.; Schach Von Wittenau, Alexis E.

    2000-01-01

    The Evaluated Teletherapy Source Library (ETSL) is a system of hardware and software that provides for maintenance of a library of useful phase space descriptions (PSDs) of teletherapy sources used in radiation therapy for cancer treatment. The PSDs are designed to be used by PEREGRINE, the all-particle Monte Carlo dose calculation system. ETSL also stores other relevant information such as monitor unit factors (MUFs) for use with the PSDs, results of PEREGRINE calculations using the PSDs, clinical calibration measurements, and geometry descriptions sufficient for calculational purposes. Not all of this information is directly needed by PEREGRINE. It also is capable of acting as a repository for the Monte Carlo simulation history files from which the generic PSDs are derived.

  5. Geodesic IO Library

    Energy Science and Technology Software Center (OSTI)

    2011-03-15

    GIO is an application programmer interface (API) or library for high performance IO that is designed for climate models that operate on a geodesic grid. GIO uses a combination of configuration files and API calls to define the mapping of internal model data to output variables in standard climate data formats. The mapping from model data to model output includes method of data slicing, aggregation, and linearization using a morton ordering approach. The data ismore » then persisted through a standard interface that can be implemented using several different high level parallel libraries. Both Parallel NetCDF and NetCDF4 interfaces are provided. GIO is designed to run on supercomputing systems or multi-processor clusters with parallel file systems.« less

  6. Solar Heat Gain Through Fenestration Systems Containing Shading: Procedures for Estimating Performance from Minimal Data

    SciTech Connect (OSTI)

    Klems, J.H.

    2000-08-01

    The computational methods for calculating the properties of glazing systems containing shading from the properties of their components have been developed, but the measurement standards and property data bases necessary to apply them have not. It is shown that with a drastic simplifying assumption these methods can be used to calculate system solar-optical properties and solar heat gain coefficients for arbitrary glazing systems, while requiring limited data about the shading. Detailed formulas are presented, and performance multipliers are defined for the approximate treatment of simple glazings with shading. As higher accuracy is demanded, the formulas become very complicated.

  7. Portable Instrumented Communication Library

    Energy Science and Technology Software Center (OSTI)

    1993-06-10

    PICL is a subroutine library that can be used to develop parallel programs that are portable across several distributed-memory multiprocessors. PICL provides a portable syntax for key communication primitives and related system calls. It also provides portable routines to perform certain widely-used, high-level communication operations, such as global broadcast and global summation. PICL provides execution tracing that can be used to monitor performance or to aid in debugging.

  8. Building Energy Modeling Library

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Modeling (BEM) Library TDM - Amir Roth Ellen Franconi Rocky Mountain Institute ... Project Overview Building Energy Modeling (BEM) Library * Define and develop a ...

  9. Math Library Performance

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Math Library Performance Math Library Performance Fully optimizing a given application's performance often requires a deep understanding of the source, an accurate profile for a ...

  10. Solar heat gain through fenestration systems containing shading: Summary of procedures for estimating performance from minimal data

    SciTech Connect (OSTI)

    Klems, Joseph H.

    2001-03-01

    The computational methods for calculating the properties of glazing systems containing shading from the properties of their components have been developed, but the measurement standards and property data bases necessary to apply them have not. It is shown that with a drastic simplifying assumption these methods can be used to calculate system solar-optical properties and solar heat gain coefficients for arbitrary glazing systems, while requiring limited data about the shading. Detailed formulas are presented, and performance multipliers are defined for the approximate treatment of simple glazings with shading. As higher accuracy is demanded, the formulas become very complicated.

  11. Using the ACML Math Library

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ACML Math Library Using the ACML Math Library The AMD ACML math library is available on Euclid. This library is described at the ACML Math Library. To compile and link with it, ...

  12. Filament-strung stand-off elements for maintaining pane separation in vacuum insulating glazing units

    DOE Patents [OSTI]

    Bettger, Kenneth J; Stark, David H

    2013-08-20

    A vacuum insulating glazing unit (VIGU) comprises first and second panes of transparent material, first and second anchors, a plurality of filaments, a plurality of stand-off elements, and seals. The first and second panes of transparent material have edges and inner and outer faces, are disposed with their inner faces substantially opposing one another, and are separated by a gap having a predetermined height. The first and second anchors are disposed at opposite edges of one pane of the VIGU. Each filament is attached at one end to the first anchor and at the other end to the second anchor, and the filaments are collectively disposed between the panes substantially parallel to one another. The stand-off elements are affixed to each filament at predetermined positions along the filament, and have a height substantially equal to the predetermined height of the gap such that the each stand-off element touches the inner surfaces of both panes. The seals are disposed about the edges of the panes, enclosing the stand-off elements within a volume between the panes from which the atmosphere may be evacuated to form a partial vacuum.

  13. Phantom Library

    Broader source: Energy.gov [DOE]

    Anthropomorphic phantoms are designed to represent the human body's characteristics in terms of radiation attenuation, physical morphology, and geometry. For in vivo counting applications, phantoms are used to calibrate radiation detection systems for measuring radioactive material in the human body.

  14. Isotope Generation and Depletion Code with Libraries Based on JENDL3.2. New ORIGEN users are advised to get CCC-750/SCALE6 and run the ORIGEN-ARP code system in that package.

    Energy Science and Technology Software Center (OSTI)

    2001-11-30

    Version 00 ORIGEN-JENDL32 includes a modified version of the CCC-371/ORIGEN2.1 code along with the libraries from that package plus new libraries, which are based on current reactor designs using the newest nuclear data file developed in Japan, JENDL-3.2. The new libraries contain not only one-group cross section data but also variable actinide cross sections and decay and fission yield data. Main objectives of the libraries are to calculate isotopic compositions averaged over whole fuel assembliesmore » for the case of LWR and isotopic compositions averaged over a whole core for the case of FBR. Target fuel assemblies are PWR 17?17 type and BWR 8?8 or 9?9 type. Target core and blanket types of FBR are chosen from several considered specifications. Evaluation of the LWR libraries was conducted by the analysis of latest post irradiation examinations carried out in Japan Atomic Energy Research Institute. The evaluation showed improved results of many isotopes. Evaluation of the FBR libraries was carried out by the comparison between new and old libraries of FBR. The calculated weights of several isotopes presented large differences. ORIGEN is a computer code system for calculating the buildup, decay, and processing of radioactive materials. ORIGEN2.1 is a revised version of CCC-217/ORIGEN and incorporates updates of the reactor models, cross sections, fission product yields, decay data, and decay photon data, as well as the source code. ORIGEN2.1 includes libraries for standard and extended-burnup PWR and BWR calculations, which are documented in ORNL/TM-11018. Note that new ORIGEN users are generally advised to request the CCC-750/SCALE 6 package, which contains ORIGEN-S and control modules to run it, in addition to a newer selection of data libraries.« less

  15. Lighting in the Library

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The purpose of the Lighting in the Library Activity is to calculate the electricity used to provide lighting in the school library and determine the feasibility of saving energy ...

  16. Sophia Library Version 12

    Energy Science and Technology Software Center (OSTI)

    2012-08-09

    Sophia Library Version 12 is the source code shared by all the executables related to the Sophia package.

  17. Discomfort glare with complex fenestration systems and the impact on energy use when using daylighting control

    SciTech Connect (OSTI)

    Hoffmann, Sabine; McNeil, Andrew; Lee, Eleanor S.; Kalyanam, Raghuram

    2015-11-03

    Glare is a frequent issue in highly glazed buildings. A modelling approach is presented that uses discomfort glare probability and discomfort glare index as metrics to determine occupants’ behaviour. A glare control algorithm that actuated an interior shade for glare protection based on the predicted perception was implemented in a building simulation program. A reference case with a state-of-the-art base glazing was compared to the same glazing but with five different complex fenestration systems, i.e., exterior shades. The windows with exterior shades showed significant variations in glare frequencies. Energy use intensity in a prototypical office building with daylighting controls was greatly influenced for the systems with frequent glare occurrence. While the base glazing could benefit from glare control, some of the exterior shades showed significantly greater energy use when discomfort glare-based operation of interior shades was considered.

  18. GNU Science Library (GSL)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    GNU Science Library (GSL) GNU Science Library (GSL) Description GSL, a numerical library for C and C++ programmers, is available on Hopper, Edison, and Carver, and PDSF. How to Access GSL You must use the module utility to access the library on all machines at NERSC. To load: module load gsl To see what environment variables are defined by the library: module show gsl Using GSL on Cori and Edison On Cori or Edison if you want to use the gcc compiler and GSL you must swap the modulefiles for the

  19. NETL DOCUMENT LIBRARY

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Library NETL Document Library You can search for documents by selecting the appropriate link with in the content section or use the Search feature below Coal Document Library In response to concerns of climate change, the United States is contemplating a complete and rapid transformation of the way it both produces and consumes energy to significantly reduce its carbon emissions. The integrated Coal Program focuses on retaining the benefits of continuing to use coal to produce electric power.

  20. West Berkeley Public Library

    High Performance Buildings Database

    Berkeley, CA The West Berkeley Public Library, first opened in December 2013, is the first publicly funded Zero Net Energy public library in California. The library takes advantage of many innovative technologies and passive design strategies to achieve its Zero Net Energy goals. The project's Building Team, led by Harley Ellis Deveraux, partnered with PG&E's Savings By Design program to perform early-stage design analyses including climate modeling, computational fluid dynamics, daylighting, solar modeling, and energy simulations.

  1. Math Kernel Library (MKL)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Kernel Library (MKL) Math Kernel Library (MKL) Description The Intel Math Kernel Library (Intel MKL) contains highly optimized, extensively threaded math routines for science, engineering, and financial applications. Core math functions include BLAS, LAPACK, ScaLAPACK, Sparse Solvers, Fast Fourier Transforms, Vector Math, and more. MKL is available on NERSC computer platforms where the Intel compilers are available. For instances, on Cori and Edison. If you use intel compilers to compile your

  2. Math Library Performance

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Math Library Performance Math Library Performance Fully optimizing a given application's performance often requires a deep understanding of the source, an accurate profile for a representative run, and the ability to have changes to the source accepted upstream. However, in many cases, significant performance gains can be achieved by simply optimizing the code over the matrix of possible compilers, compiler options and libraries available on a given machine. Here, we explore the performance

  3. Research Library Awards

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Shankar of the Research Library (STBPO-RL) and collaborators at Old Dominion University (Michael Nelson and Scott Ainsworth) won the 2010 Digital Preservation Award for Memento, a...

  4. Monochromator Crystal Glitch Library

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    SSRL's Monochromator Crystal Glitch Library allows users to view glitch spectra online, list specific crystal orientations, and download PDF files of the glitch spectra. (Specialized Interface)

  5. About the Library

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    collections of books, journals, databases, patents and technical reports and offers literature searching, training and outreach services. The library's R&D component pursues...

  6. Luna Hostlist Library

    Energy Science and Technology Software Center (OSTI)

    2013-10-03

    This package implements a Lua interface to the LLNL hostlist routines, and includes a hostlist command oine utility based on the lua hostlist library.

  7. Software and Libraries | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    System Overview Data Storage & File Systems Compiling & Linking Queueing & Running Jobs Data Transfer Debugging & Profiling Performance Tools & APIs Software & Libraries Boost CPMD Code_Saturne GAMESS GPAW GROMACS LAMMPS MADNESS QBox IBM References Cooley Policies Documentation Feedback Please provide feedback to help guide us as we continue to build documentation for our new computing resource. [Feedback Form] Software and Libraries Expand All Close All Mira/Cetus Vesta

  8. About the Library

    Broader source: Energy.gov [DOE]

    The Law Library is located on the 6th floor of Forrestal between the A and B corridors at 6A-156 or 6B-157.  The doors to the Law Library remain open as long as the Forrestal Building is accessible...

  9. MS FORTRAN Extended Libraries

    Energy Science and Technology Software Center (OSTI)

    1986-09-01

    DISPPAK is a set of routines for use with Microsoft FORTRAN programs that allows the flexible display of information on the screen of an IBM PC in both text and graphics modes. The text mode routines allow the cursor to be placed at an arbitrary point on the screen and text to be displayed at the cursor location, making it possible to create menus and other structured displays. A routine to set the color ofmore » the characters that these routines display is also provided. A set of line drawing routines is included for use with IBM''s Color Graphics Adapter or an equivalent board (such as the Enhanced Graphics Adapter in CGA emulation mode). These routines support both pixel coordinates and a user-specified set of real number coordinates. SUBPAK is a function library which allows Microsoft FORTRAN programs to calculate random numbers, issue calls to the operating system, read individual characters from the keyboard, perform Boolean and shift operations, and communicate with the I/O ports of the IBM PC. In addition, peek and poke routines, a routine that returns the address of any variable, and routines that can access the system time and date are included.« less

  10. A Comparison of Library Tracking Methods in High Performance

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Library Tracking Methods in High Performance Computing Computer System Cluster and Networking Summer Institute 2013 Poster Seminar William Rosenberger (New Mexico Tech), Dennis...

  11. Library Tools, Office of Scientific and Technical Information...

    Office of Scientific and Technical Information (OSTI)

    DOE MARC Records System provides Machine-Readable Cataloging (MARC) records for full-text research reports for downloading directly into library catalogs. Open Archives Initiative ...

  12. Library | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Library Library The Office of Electricity Delivery and Energy Reliability (OE) leads the Department of Energy's efforts to ensure a resilient, reliable, and flexible electricity system. Below are links to OE's Federal Register notices, a wide range of reports and other documents, fact sheets, and peer review materials. Federal Register Notices Federal Register Notices (FRNs) are published in compliance with government regulation to inform the public of announcements, meetings, applications, and

  13. QER Document Library | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Quadrennial Energy Review: First Installment » QER Document Library QER Document Library The Presidential Memorandum establishing the QER directed the QER Task Force to conduct analysis and modeling to support QER recommendations and actions. As part of this effort, the Office of Energy Policy and Systems Analysis (EPSA) commissioned an extensive suite of analyses, focusing on energy TS&D infrastructures. Linked below are the major commissioned analyses used to support the findings and

  14. Lighting in the Library

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    lores.pdf (1.43

    hires.pdf (1.65

    The purpose of the Lighting in the Library Activity is to calculate the electricity used to provide lighting in the school library and determine the feasibility of saving energy and money by using energy efficient lighting fixtures. Your students will assume the role of an energy auditor assigned the task of assessing the current situation and making a recommendation for energy-efficient improvements. This activitity requires a trip to the library, an

  15. Genomic library construction

    DOE Patents [OSTI]

    Church, George M.; Zhang, Kun

    2011-07-26

    Compositions and methods for amplifying nucleic acid sequences from a single cell are provided. Compositions and methods for constructing a genomic library from a single cell are also provided.

  16. lighting in the library

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Determine the Feasibility of Installing Energy Efficient Lighting In this part of the exercise, you will plan a new approach to lighting your school library. This new plan will use ...

  17. Library for Nonlinear Optimization

    Energy Science and Technology Software Center (OSTI)

    2001-10-09

    OPT++ is a C++ object-oriented library for nonlinear optimization. This incorporates an improved implementation of an existing capability and two new algorithmic capabilities based on existing journal articles and freely available software.

  18. Local STAR Libraries

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Local STAR Libraries Local STAR Libraries The libraries listed below are built locally at PDSF and are available under the chos environment sl53. The 32sl44 chos environment has been retire but the libraries are still listed for reference. Version Tag ROOT Version Status Mode Date Comment SL12b (new) SL12b 5.22.00 built debug 4/17/12 SL5.3 SL12a SL12a 5.22.00 built debug 3/14/12 SL5.3 SL11e SL11e 5.22.00 built debug 11/30/11 SL5.3 SL11d (pro) SL11d 5.22.00 built debug 8/1/11 SL5.3 SL11c SL11c_1

  19. NSUF Irradiated Materials Library

    SciTech Connect (OSTI)

    Cole, James Irvin

    2015-09-01

    The Nuclear Science User Facilities has been in the process of establishing an innovative Irradiated Materials Library concept for maximizing the value of previous and on-going materials and nuclear fuels irradiation test campaigns, including utilization of real-world components retrieved from current and decommissioned reactors. When the ATR national scientific user facility was established in 2007 one of the goals of the program was to establish a library of irradiated samples for users to access and conduct research through competitively reviewed proposal process. As part of the initial effort, staff at the user facility identified legacy materials from previous programs that are still being stored in laboratories and hot-cell facilities at the INL. In addition other materials of interest were identified that are being stored outside the INL that the current owners have volunteered to enter into the library. Finally, over the course of the last several years, the ATR NSUF has irradiated more than 3500 specimens as part of NSUF competitively awarded research projects. The Logistics of managing this large inventory of highly radioactive poses unique challenges. This document will describe materials in the library, outline the policy for accessing these materials and put forth a strategy for making new additions to the library as well as establishing guidelines for minimum pedigree needed to be included in the library to limit the amount of material stored indefinitely without identified value.

  20. ug[SCIP,*] Library : A Software Library for General Purpose Parallel...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ugSCIP,* Library : A Software Library for General Purpose Parallel Branch-and-Bound ... ugSCIP,* library is a software library to parallelize customized SCIP solvers. ...

  1. A Generalized Portable SHMEM Library for High Performance Computing

    SciTech Connect (OSTI)

    Parzyszek, K.; Nieplocha, J.; Kendall, R.A.

    2000-09-15

    This paper describes a portable one-sided communication library GPSHMEM that follows the interfaces of the successful SHMEM library introduced by Cray Research Inc. for their distributed memory systems: the Cray T3D and T3E. The portability is achieved by relying on ARMCI, a low-level communication library developed to support one-sided communication in distributed array libraries and compiler run-time systems, and the MPI message passing interface. The paper discusses implementation, requirements, and initial experience with GPSHMEM.

  2. XAFS Model Compound Library

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Newville, Matthew

    The XAFS Model Compound Library contains XAFS data on model compounds. The term "model" compounds refers to compounds of homogeneous and well-known crystallographic or molecular structure. Each data file in this library has an associated atoms.inp file that can be converted to a feff.inp file using the program ATOMS. (See the related Searchable Atoms.inp Archive at http://cars9.uchicago.edu/~newville/adb/) This Library exists because XAFS data on model compounds is useful for several reasons, including comparing to unknown data for "fingerprinting" and testing calculations and analysis methods. The collection here is currently limited, but is growing. The focus to date has been on inorganic compounds and minerals of interest to the geochemical community. [Copied, with editing, from http://cars9.uchicago.edu/~newville/ModelLib/

  3. List of Math Libraries

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Libraries List List of Math Libraries Package Platform Version Module Install Date Date Made Default A Fortran interface to the GNU Scientific Library (GSL) edison 1.0.0 fgsl/1.0.0 2015-04-14 2016-08-31 ACML cori 5.3.1 acml/5.3.1 2015-12-22 2016-06-30 ACML cori 6.1.0.31 acml/6.1.0.31 2015-12-22 ACML edison 5.3.1 acml/5.3.1 2016-01-26 2016-08-31 ACML edison 6.1.0.31 acml/6.1.0.31 2016-01-26 acml genepool 5.1.0 acml/5.1.0 2012-07-07 acml genepool_sl6 5.1.0 acml/5.1.0 2015-03-06 acml phoebe 5.1.0

  4. Using the ACML Math Library

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ACML Math Library Using the ACML Math Library The AMD ACML math library is available on Euclid. This library is described at the ACML Math Library. To compile and link with it, load the ACML library and include the $ACML environment variable as part of your compile/link line: % module load acml % mpicc -o cblas cblas.c $ACML If you have the gnu compilers loaded, use the acml-gnu module instead. Last edited: 2011-04-06 13:02:19

  5. Experience With the SCALE Criticality Safety Cross Section Libraries

    SciTech Connect (OSTI)

    Bowman, S.M.

    2000-08-21

    This report provides detailed information on the SCALE criticality safety cross-section libraries. Areas covered include the origins of the libraries, the data on which they are based, how they were generated, past experience and validations, and performance comparisons with measured critical experiments and numerical benchmarks. The performance of the SCALE criticality safety cross-section libraries on various types of fissile systems are examined in detail. Most of the performance areas are demonstrated by examining the performance of the libraries vs critical experiments to show general trends and weaknesses. In areas where directly applicable critical experiments do not exist, performance is examined based on the general knowledge of the strengths and weaknesses of the cross sections. In this case, the experience in the use of the cross sections and comparisons with the results of other libraries on the same systems are relied on for establishing acceptability of application of a particular SCALE library to a particular fissile system. This report should aid in establishing when a SCALE cross-section library would be expected to perform acceptably and where there are known or suspected deficiencies that would cause the calculations to be less reliable. To determine the acceptability of a library for a particular application, the calculational bias of the library should be established by directly applicable critical experiments.

  6. Floating Point Control Library

    Energy Science and Technology Software Center (OSTI)

    2007-08-02

    Floating Point Control is a Library that allows for the manipulation of floating point unit exception masking funtions control exceptions in both the Streaming "Single Instruction, Multiple Data" Extension 2 (SSE2) unit and the floating point unit simultaneously. FPC also provides macros to set floating point rounding and precision control.

  7. OTP/LDAP Client Library

    Energy Science and Technology Software Center (OSTI)

    2007-10-01

    The OTP/LDAP Client Library provides a C library, PAM module and Perl module which can be used by developers to easily incorporate two-factor authentication in to their various client applications.

  8. DOE - NNSA/NFO -- Library

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Library NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office Library The Library section provides a central location for Fact Sheets, Films, Forms, News Releases, Photos, Environmental Publications and Reports, Current Publications, Historical Publications, Newsletters and many other documents supporting the Nevada Field Office mission and vision. Browse the complete Library content by clicking the links to the left. If you have any questions or would like more information, contact the

  9. Montana Geographic Information Library | Open Energy Information

    Open Energy Info (EERE)

    Montana Geographic Information Library Jump to: navigation, search OpenEI Reference LibraryAdd to library Map: Montana Geographic Information LibraryInfo GraphicMapChart Abstract...

  10. PHYSLIB: A C++ tensor class library

    SciTech Connect (OSTI)

    Budge, K.G.

    1991-10-09

    C++ is the first object-oriented programming language which produces sufficiently efficient code for consideration in computation-intensive physics and engineering applications. In addition, the increasing availability of massively parallel architectures requires novel programming techniques which may prove to be relatively easy to implement in C++. For these reasons, Division 1541 at Sandia National Laboratories is devoting considerable resources to the development of C++ libraries. This document describes the first of these libraries to be released, PHYSLIB, which defines classes representing Cartesian vectors and (second-order) tensors. This library consists of the header file physlib.h, the inline code file physlib.inl, and the source file physlib.C. The library is applicable to both three-dimensional and two-dimensional problems; the user selects the 2-D version of the library by defining the symbol TWO D in the header file physlib.h and recompiling physlib.C and his own code. Alternately, system managers may wish to provide duplicate header and object modules of each dimensionality. This code was produced under the auspices of Sandia National Laboratories, a federally-funded research center administered for the United States Department of Energy on a non-profit basis by AT T. This code is available to US citizens, and institutions under research, government use and/or commercial license agreements.

  11. DOE - NNSA/NFO -- Photo Library AMS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AMS NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office Photo Library - Aerial Measuring System (AMS) The Aerial Measuring System is one of the emergency response resources, or assets, administered by NNSA. Aerial Measuring System (AMS) detects, measures, and tracks radioactive material at an emergency to determine contamination levels. Instructions: Click the photograph THUMBNAIL to view the photograph details Click the Category, Number, or Date table header links to sort the

  12. Feature Characterization Library

    Energy Science and Technology Software Center (OSTI)

    2006-08-03

    FCLib is a data analysis toolkit constructed to meet the needs of data discovery in large-scale, spatio-temporal data such as finite element simulation data. FCLib is a C library toolkit of building blocks that can be assembled into complex analyses. Important features of FCLib include the following: (1) Support of feature-based analysis, (2) minimization of low-oevel processing, (3) ease of use, and (4) applicable to the wide variety of science domains.

  13. EC Image Library

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Image Library - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Energy Defense Waste Management Programs Advanced Nuclear Energy

  14. EC Video Library

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Video Library - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Energy Defense Waste Management Programs Advanced Nuclear Energy

  15. lighting in the library

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Determine the Feasibility of Installing Energy Efficient Lighting In this part of the exercise, you will plan a new approach to lighting your school library. This new plan will use less energy, cost less, and result in less greenhouse gas. Your plan will also include bottom line calculations and decision factors such as: identifying the costs and payback for buying and installing new lighting equipment and making a determination about whether or not the new, more efficient lighting will provide

  16. Microsoft, libraries and open source

    ScienceCinema (OSTI)

    None

    2011-10-06

    We are finally starting to see the early signs of transformation inscholarly publishing. The innovations we've been expecting for years areslowly being adopted, but we can also expect the pace of change toaccelerate in the coming 3 to 5 years. At the same time, many of ritualsand artifacts of the scholarly communication lifecycle are still rooted ina centuries-old model.  What are the primary goals of scholarlycommunication, and what will be the future role of librarians in thatcycle?  What are the obstacles in information flow (many of our owndesign) that can be removed?Is the library profession moving fast enough to stay ahead of the curve...or are we ever going to be struggling to keep up? With the advent of thedata deluge, all-XML workflows, the semantic Web, cloud servicesand increasingly intelligent mobile devices - what are the implicationsfor libraries, archivists, publishers, scholarly societies as well asindividual researchers and scholars? The opportunities are many - butcapitalizing on this ever-evolving landscape will require significantchanges to our field, changes that we are not currently well-positioned toenact. This talk will map the current scholarly communication landscape -highlighting recent exciting developments, and will focus on therepercussions and some specific recommendations for the broader field ofinformation management.About the speaker:Alex Wade is the Director for Scholarly Communication within Microsoft'sExternal Research division, where he oversees several projects related toresearcher productivity tools, semantic information capture, and theinteroperability of information systems. Alex holds a Bachelor's degree inPhilosophy from U.C. Berkeley, and a Masters of Librarianship degree fromthe University of Washington.During his career at Microsoft, Alex has managed the corporate search andtaxonomy management services; has shipped a SharePoint-based document andworkflow management solution for Sarbanes-Oxley compliance; and served

  17. Neutron Library (ENDL82) in the transmittal format

    SciTech Connect (OSTI)

    Howerton, R.J.; Dye, R.E.; Perkins, S.T.

    1982-06-26

    There are four main libraries of data included within the system described. They are ENDL (Evaluated Neutron Data Library), ECPL (Evaluated Charged-Particle Data Library), ACTL (Evaluated Neutron-Induced Activation Cross-Section Library), and EGDL (Evaluated Photon Interaction Data Library). The first three deal with nuclear processes induced by neutrons or light charged particles (Z less than or equal to 2, A less than or equal to 4). The fourth (EGDL) contains the data appropriate to photons with energies between 100 eV and 100 MeV that interact with atoms of the elements in their ground state, i.e., cold targets. EGDL does not contain data for photonuclear reactions.

  18. Validation of a large activation cross-section library

    SciTech Connect (OSTI)

    Muir, D.W.; Wilson, W.B.

    1994-06-01

    The 63-group neutron cross-section library used for neutron activation studies in the Nuclear Theory and Applications Group at Los Alamos has a variety of sources of widely varying levels of quality. This heterogeneous aspect, which is a common feature of all libraries used in activation studies, is a direct consequence of the need to quickly obtain data for up to 15,000 different excitation functions involving 750 different targets. Because of the need to assess the reliability of this library and ten to improve it, we have initiated a systematic comparison of this library with three main data sources, especially the large CSISRS online data system, maintained by the National Nuclear Data Center at Brookhaven National Laboratory. We report on the results of extensive comparisons between the experimental data and the multigroup library. We briefly mention new theoretical approaches data evaluation that are suitable for meeting future data needs in this area.

  19. Normalized cDNA libraries

    DOE Patents [OSTI]

    Soares, M.B.; Efstratiadis, A.

    1997-06-10

    This invention provides a method to normalize a directional cDNA library constructed in a vector that allows propagation in single-stranded circle form comprising: (a) propagating the directional cDNA library in single-stranded circles; (b) generating fragments complementary to the 3{prime} noncoding sequence of the single-stranded circles in the library to produce partial duplexes; (c) purifying the partial duplexes; (d) melting and reassociating the purified partial duplexes to moderate Cot; and (e) purifying the unassociated single-stranded circles, thereby generating a normalized cDNA library. 4 figs.

  20. Normalized cDNA libraries

    DOE Patents [OSTI]

    Soares, Marcelo B.; Efstratiadis, Argiris

    1997-01-01

    This invention provides a method to normalize a directional cDNA library constructed in a vector that allows propagation in single-stranded circle form comprising: (a) propagating the directional cDNA library in single-stranded circles; (b) generating fragments complementary to the 3' noncoding sequence of the single-stranded circles in the library to produce partial duplexes; (c) purifying the partial duplexes; (d) melting and reassociating the purified partial duplexes to moderate Cot; and (e) purifying the unassociated single-stranded circles, thereby generating a normalized cDNA library.

  1. Video Library | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Archives APS Brochure Annual Reports Posters Podcasts Image Gallery external site Video Library Syndicated Feeds (RSS) Featured Videos: Introduction to the Advanced Photon...

  2. Video Library | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Archives APS Brochure Annual Reports Posters Podcasts Image Gallery external site Video Library Syndicated Feeds (RSS) Now Playing: The Advanced Photon Source More videos:...

  3. Video Library | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Video Library Related Links: APS Colloquium APS Podcasts APS Today More videos: Introduction to the APS Physics of the Blues Now Playing: Building the Advanced Photon Source This...

  4. Biomass Scenario Model Scenario Library: Definitions, Construction, and

    Office of Scientific and Technical Information (OSTI)

    Description (Technical Report) | SciTech Connect Biomass Scenario Model Scenario Library: Definitions, Construction, and Description Citation Details In-Document Search Title: Biomass Scenario Model Scenario Library: Definitions, Construction, and Description Understanding the development of the biofuels industry in the United States is important to policymakers and industry. The Biomass Scenario Model (BSM) is a system dynamics model of the biomass-to-biofuels system that can be used to

  5. Advanced fenestration systems for improved daylight performance

    SciTech Connect (OSTI)

    Lee, E S; Selkowitz, S

    1998-03-01

    The use of daylight to replace or supplement electric lighting in commercial buildings can result in significant energy and demand savings. High performance fenestration systems area necessary, but not sufficient, element of any successful daylighting design that reduces lighting energy use. However, these savings may be reduced if the fenestration systems impose adverse thermal loads. In this paper, we review the state of the art of several advanced fenestration systems which are designed to maximize the energy-saving potential of daylighting, while improving comfort and visual performance at an "affordable" cost. We first review the key performance issues that successful fenestration systems must address, and then review several classes of fenestration systems intended to meet those performance needs. The systems are reviewed in two categories: static and dynamic. Static systems include not only glazings, such as spectrally-selective and holographic glazings, but specialized designs of light-shelves and light-pipes, while dynamic systems cover automatically-operated Venetian blinds and electrochromic glazings. We include a discussion of the research directions in this area, and how these efforts might lead to static and dynamic hardware and system solutions that fulfill the multiple roles that these systems must play in terms of energy efficiency, comfort, visual performance, health, and amenity in future buildings.

  6. Montana Pollutant Discharge Elimination System (MPDES) Webpage...

    Open Energy Info (EERE)

    System (MPDES) Webpage Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Montana Pollutant Discharge Elimination System (MPDES) Webpage Abstract Provides...

  7. DOE - NNSA/NFO -- Photo Library

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Library NNSANFO Language Options U.S. DOENNSA - Nevada Field Office Photo Library Search Listed by categories below are publicly released photos in the Nevada Field Office photo ...

  8. Nervana Neon - Scalable Deep Learning library

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Neon Nervana Neon - Scalable Deep Learning library Description and Overview neon is an easy to use, python-based scalable Deep Learning library. Deep Learning has recently achieved...

  9. Geothermal EGS Demonstration Photo Library | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Geothermal EGS Demonstration Photo Library Geothermal EGS Demonstration Photo Library Addthis Energy Department EGS Demonstration Yields First Commercial Power to the Grid 1 of 4 Energy Department EGS Demonstration Yields First Commercial Power to the Grid In April 2013, DOE industry partner Ormat Technologies succeeded in generating the nation's first commercial power from enhanced geothermal systems to the grid at Desert Peak, Nevada. Image: courtesy Ormat Technologies AltaRock

  10. EERE Publication and Product Library

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Help This guide will provide basic information on how to use the library functions, i.e., browsing, searching, and requesting items by mail. Basic Search Advanced Search Browse By Topic Using Search Results Mail Requests Basic Search Search the Library The basic search accesses the title, description, filename, and keywords for the search term(s) you enter. Enter your search term or phrase in the "Search the Library" box and then click the Search button. Search results will be

  11. Pairwise Sequence Alignment Library

    SciTech Connect (OSTI)

    2015-05-20

    Vector extensions, such as SSE, have been part of the x86 CPU since the 1990s, with applications in graphics, signal processing, and scientific applications. Although many algorithms and applications can naturally benefit from automatic vectorization techniques, there are still many that are difficult to vectorize due to their dependence on irregular data structures, dense branch operations, or data dependencies. Sequence alignment, one of the most widely used operations in bioinformatics workflows, has a computational footprint that features complex data dependencies. The trend of widening vector registers adversely affects the state-of-the-art sequence alignment algorithm based on striped data layouts. Therefore, a novel SIMD implementation of a parallel scan-based sequence alignment algorithm that can better exploit wider SIMD units was implemented as part of the Parallel Sequence Alignment Library (parasail). Parasail features: Reference implementations of all known vectorized sequence alignment approaches. Implementations of Smith Waterman (SW), semi-global (SG), and Needleman Wunsch (NW) sequence alignment algorithms. Implementations across all modern CPU instruction sets including AVX2 and KNC. Language interfaces for C/C++ and Python.

  12. Pairwise Sequence Alignment Library

    Energy Science and Technology Software Center (OSTI)

    2015-05-20

    Vector extensions, such as SSE, have been part of the x86 CPU since the 1990s, with applications in graphics, signal processing, and scientific applications. Although many algorithms and applications can naturally benefit from automatic vectorization techniques, there are still many that are difficult to vectorize due to their dependence on irregular data structures, dense branch operations, or data dependencies. Sequence alignment, one of the most widely used operations in bioinformatics workflows, has a computational footprintmore » that features complex data dependencies. The trend of widening vector registers adversely affects the state-of-the-art sequence alignment algorithm based on striped data layouts. Therefore, a novel SIMD implementation of a parallel scan-based sequence alignment algorithm that can better exploit wider SIMD units was implemented as part of the Parallel Sequence Alignment Library (parasail). Parasail features: Reference implementations of all known vectorized sequence alignment approaches. Implementations of Smith Waterman (SW), semi-global (SG), and Needleman Wunsch (NW) sequence alignment algorithms. Implementations across all modern CPU instruction sets including AVX2 and KNC. Language interfaces for C/C++ and Python.« less

  13. Computational Fluid Dynamics Library

    Energy Science and Technology Software Center (OSTI)

    2005-03-04

    CFDLib05 is the Los Alamos Computational Fluid Dynamics LIBrary. This is a collection of hydrocodes using a common data structure and a common numerical method, for problems ranging from single-field, incompressible flow, to multi-species, multi-field, compressible flow. The data structure is multi-block, with a so-called structured grid in each block. The numerical method is a Finite-Volume scheme employing a state vector that is fully cell-centered. This means that the integral form of the conservation lawsmore » is solved on the physical domain that is represented by a mesh of control volumes. The typical control volume is an arbitrary quadrilateral in 2D and an arbitrary hexahedron in 3D. The Finite-Volume scheme is for time-unsteady flow and remains well coupled by means of time and space centered fluxes; if a steady state solution is required, the problem is integrated forward in time until the user is satisfied that the state is stationary.« less

  14. Document Library | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services » Document Library Document Library July 19, 2016 Excess Uranium Management On July 19, 2016, the Department issued a Request for Information on the effects of DOE transfers of excess uranium on domestic uranium mining, conversion, and enrichment industries. The Request for Information established an August 18, 2016 deadline for the submission of written comments. On August 1, 2016, the Department extended the comment period to September 19, 2016. July 18, 2016 NE NEET-Reactor

  15. EERE Publication and Product Library

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Feature featured product thumbnail Energy Savers: Tips on Saving Money & Energy at Home Details Bookmark & Share View Related Welcome to the EERE Publication and Product Library. This library will allow you to find publications and products provided by the DOE's Office of Energy Efficiency and Renewable Energy specifically for our constituents. To help serve you better this database will allow you to: Search for publications and products Download or view publications online Request a

  16. Single-Chain Antibody Library

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Baird, Cheryl

    Researchers at Pacific Northwest National Laboratory (PNNL) have constructed a nonimmune library consisting of 109 human antibody scFv fragments, which have been cloned and expressed on the surface of yeast. Nanomolar-affinity scFvs are routinely obtained by magnetic bead screening and flow cytometric sorting. The yeast library can be amplified 1010 fold without measurable loss of clonal diversity. This allows for indefinite expansion of the library. All scFv clones can be assessed directly on the yeast cell surface by immunofluorescent labeling and flow cytometry, obviating separate subcloning, expression, and purification steps. The ability to use multiplex library screening demonstrates the utility of this approach for high-throughput antibody isolation for proteomic applications. The yeast library may be used for research projects or teaching performed for U.S. Government purposes only. If you would like to request an aliquot of the single-chain antibody library for your research, please print and fill out the Materials Transfer Agreement (MTA) [PDF, 20K]. The website provides the contact information for mailing the MTA. [copied from http://www.sysbio.org/dataresources/singlechain.stm

  17. Integral collector storage system with heat exchange apparatus

    DOE Patents [OSTI]

    Rhodes, Richard O.

    2004-04-20

    The present invention relates to an integral solar energy collector storage systems. Generally, an integral collector storage system includes a tank system, a plurality of heat exchange tubes with at least some of the heat exchange tubes arranged within the tank system, a first glazing layer positioned over the tank system and a base plate positioned under the tank system. In one aspect of the invention, the tank system, the first glazing layer an the base plate each include protrusions and a clip is provided to hold the layers together. In another aspect of the invention, the first glazing layer and the base plate are ribbed to provide structural support. This arrangement is particularly useful when these components are formed from plastic. In yet another aspect of the invention, the tank system has a plurality of interconnected tank chambers formed from tubes. In this aspect, a supply header pipe and a fluid return header pipe are provided at a first end of the tank system. The heat exchange tubes have inlets coupled to the supply header pipe and outlets coupled to the return header pipe. With this arrangement, the heat exchange tubes may be inserted into the tank chambers from the first end of the tank system.

  18. Mining Software Usage with the Automatic Library Tracking Database (ALTD)

    SciTech Connect (OSTI)

    Hadri, Bilel; Fahey, Mark R

    2013-01-01

    Tracking software usage is important for HPC centers, computer vendors, code developers and funding agencies to provide more efficient and targeted software support, and to forecast needs and guide HPC software effort towards the Exascale era. However, accurately tracking software usage on HPC systems has been a challenging task. In this paper, we present a tool called Automatic Library Tracking Database (ALTD) that has been developed and put in production on several Cray systems. The ALTD infrastructure prototype automatically and transparently stores information about libraries linked into an application at compilation time and also the executables launched in a batch job. We will illustrate the usage of libraries, compilers and third party software applications on a system managed by the National Institute for Computational Sciences.

  19. The MCLIB library: New features

    SciTech Connect (OSTI)

    Seeger, P.A.

    1996-12-31

    This report describes the philosophy and structure of MCLIB, A Fortran library of Monte Carlo subroutines which has been developed to test designs of neutron scattering instruments. Emphasis is placed on new features added to the library since the previous presentation of MCLIB at ICANS-XIII in October, 1995. These new features include toroidal mirrors, writing and reading source files, splitting and banking of histories, and a Maxwellian probability distribution. The only change of a program structure has been to include charge and polarization vector in the description of a particle. The latest release of the source code and documentation may be obtained by anonymous ftp. Work is also continuing on a more friendly web-based user interface, and user input is requested for additional features to be added to the library.

  20. JEF 2.2 Cross Section Library for the MCNP Monte Carlo Code.

    Energy Science and Technology Software Center (OSTI)

    2003-11-24

    Version 01 This continuous energy cross-section data library for MCNP is based on the JEF-2.2 evaluated nuclear data library (ACE format). The present library was satisfactorily tested in thermal and fast criticality benchmarks. For analyses below 20 MeV, MCJEF22NEA.BOLlB was applied also in cell and core calculations dedicated to the study of the subcritical accelerator driven systems (ADS).

  1. National Wildlife Refuge System Administration Act | Open Energy...

    Open Energy Info (EERE)

    Wildlife Refuge System Administration Act Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: National Wildlife Refuge System...

  2. Numerical Modelling of Geothermal Systems a Short Introduction...

    Open Energy Info (EERE)

    Modelling of Geothermal Systems a Short Introduction Jump to: navigation, search OpenEI Reference LibraryAdd to library General: Numerical Modelling of Geothermal Systems a Short...

  3. Oregon Application for Onsite Sewage Treatment System | Open...

    Open Energy Info (EERE)

    Application for Onsite Sewage Treatment System Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: Oregon Application for Onsite Sewage Treatment System...

  4. EPA - Permit Compliance System webpage | Open Energy Information

    Open Energy Info (EERE)

    System webpage Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: EPA - Permit Compliance System webpage Abstract This webpage contains EPA's...

  5. Montana Ground Water Pollution Control System Information Webpage...

    Open Energy Info (EERE)

    Ground Water Pollution Control System Information Webpage Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Montana Ground Water Pollution Control System...

  6. Active Geothermal Systems And Associated Gold Deposits In The...

    Open Energy Info (EERE)

    Geothermal Systems And Associated Gold Deposits In The Great Basin Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: Active Geothermal Systems...

  7. Library Tools | OSTI, US Dept of Energy Office of Scientific...

    Office of Scientific and Technical Information (OSTI)

    Library Tools Science Search Tools Home DOE Collections Journal Sources Library Tools U.S. Federal Agencies Global Databases Customized Resources Department of Energy library tools ...

  8. The Process Manager Collective Library

    Energy Science and Technology Software Center (OSTI)

    2009-02-26

    The PMGR_COLLECTIVE library provides an interface that MPI implemenataions may call to initialize ranks in a scalable way. It was developed to reduce the startup time MPI appkications, however, other tools such as debugger infrastructures have also found use cases for it. When first developed, it reduced the startup time from 15 minutes to 10 seconds on as 8192-node cluster.

  9. Slope Extensions to ASL Library

    Energy Science and Technology Software Center (OSTI)

    2010-03-31

    Extensions to the AMPL/solver interface library (http://netlib.sandia.gov/ampl/solvers) to compute bounds on algebraic expressions, plus a test program. use in uncertainty quantification and global optimization algorithms. This software is not primarily for military applications.

  10. EERE Publication and Product Library

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advanced Search Type in a search term or phrase, AND/OR select additional criteria (Information For, Information Type, Product Type, or EERE Office Name) to narrow your search results, AND PRESS 'SEARCH'. Search the Library (Searches Title, Description and Keywords) Exact Phrase All Words Any Word Search View /Adjust Advanced Search Criteria

  11. Virtual Library on Genetics from Oak Ridge National Laboratory

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    The World Wide Web (WWW) Virtual Library is a collaborative effort to provide topic indices that break down into many subtopics guiding users to vast resources of information around the world. ORNL hosts the Virtual Library on Genetics as part of the WWWVL's Biosciences topic area. The VL on Genetics is also a collection of links to information resources that supported the DOE Human Genome Project. That project has now evolved into Genomics: GTL. GTL is DOE's next step in genomics--builds on data and resources from the Human Genome Project, the Microbial Genome Program, and systems biology. GTL will accelerate understanding of dynamic living systems for solutions to DOE mission challenges in energy and the environment. The section of the Virtual Library on Genetics that is titled Organisms guides users to genetic information resources and gene sequences for animals, insects, microbes, and plant life.

  12. lighting in the library

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The amount and quality of light around us affects our health, safety, comfort, and productivity. Our country spends more than $37 billion each year on electricity for lighting, but technologies developed during the past 10 years can help us cut lighting costs by 30% to 60% while enhancing lighting quality and reducing environmental impacts. In a typical indoor lighting system, 50 percent or more of the energy supplied to the lamp can be wasted by obsolete equipment, poor maintenance, or

  13. Women in STEM Panel @Mesa Public Library

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Panel @Mesa Public Library WHEN: Oct 15, 2015 7:00 PM - Feb 12, 2015 8:30 PM WHERE: Mesa Public Library 2400 Central Ave, Los Alamos, NM 87544 SPEAKER: Nicole-Lloyd-Ronning, Teri...

  14. Monte Carlo N–Particle Transport Code System Including MCNP6.1, MCNP5-1.60, MCNPX-2.7.0 and Data Libraries.

    Energy Science and Technology Software Center (OSTI)

    2013-07-16

    Version 01 US DOE 10CFR810 Jurisdiction. MCNP6™ is a general-purpose, continuous-energy, generalized-geometry, time-dependent, Monte Carlo radiation-transport code designed to track many particle types over broad ranges of energies. MCNP6 represents the culmination of a multi-year effort to merge the MCNP5™ [X-503] and MCNPX™ [PEL11] codes into a single product comprising all features of both. For those familiar with previous versions of MCNP, you will discover the code has been expanded to handle a multitude ofmore » particles and to include model physics options for energies above the cross-section table range, a material burnup feature, and delayed particle production. Expanded and/or new tally, source, and variance-reduction options are available to the user as well as an improved plotting capability. The capability to calculate keff eigenvalues for fissile systems remains a standard feature. Although MCNP6 is simply and accurately described as the merger of MCNP5 and MCNPX capabilities, the result is much more than the sum of these two computer codes. MCNP6 is the result of five years of effort by the MCNP5 and MCNPX code development teams. These groups of people, residing in the Los Alamos National Laboratory's (LANL) X Computational Physics Division, Monte Carlo Codes Group (XCP-3), and Nuclear Engineering and Nonproliferation Division, Systems Design and Analysis Group (NEN-5, formerly D-5), have combined their code development efforts to produce the next evolution of MCNP. While maintenance and bug fixes will continue for MCNP5 v.1.60 and MCNPX v.2.7.0 for upcoming years, new code development capabilities will be developed and released only in MCNP6. In fact, this initial production release of MCNP6 (v. 1.0) contains 16 new features not previously found in either code. These new features include (among others) the abilities to import unstructured mesh geometries from the finite element code Abaqus, to transport photons down to 1.0 eV, to model

  15. Monte Carlo N–Particle Transport Code System Including MCNP6.1, MCNP5-1.60, MCNPX-2.7.0 and Data Libraries.

    Energy Science and Technology Software Center (OSTI)

    2013-07-16

    Version 00 US DOE 10CFR810 Jurisdiction. MCNP6™ is a general-purpose, continuous-energy, generalized-geometry, time-dependent, Monte Carlo radiation-transport code designed to track many particle types over broad ranges of energies. MCNP6 represents the culmination of a multi-year effort to merge the MCNP5™ [X-503] and MCNPX™ [PEL11] codes into a single product comprising all features of both. For those familiar with previous versions of MCNP, you will discover the code has been expanded to handle a multitude ofmore » particles and to include model physics options for energies above the cross-section table range, a material burnup feature, and delayed particle production. Expanded and/or new tally, source, and variance-reduction options are available to the user as well as an improved plotting capability. The capability to calculate keff eigenvalues for fissile systems remains a standard feature. Although MCNP6 is simply and accurately described as the merger of MCNP5 and MCNPX capabilities, the result is much more than the sum of these two computer codes. MCNP6 is the result of five years of effort by the MCNP5 and MCNPX code development teams. These groups of people, residing in the Los Alamos National Laboratory's (LANL) X Computational Physics Division, Monte Carlo Codes Group (XCP-3), and Nuclear Engineering and Nonproliferation Division, Systems Design and Analysis Group (NEN-5, formerly D-5), have combined their code development efforts to produce the next evolution of MCNP. While maintenance and bug fixes will continue for MCNP5 v.1.60 and MCNPX v.2.7.0 for upcoming years, new code development capabilities will be developed and released only in MCNP6. In fact, this initial production release of MCNP6 (v. 1.0) contains 16 new features not previously found in either code. These new features include (among others) the abilities to import unstructured mesh geometries from the finite element code Abaqus, to transport photons down to 1.0 eV, to model

  16. The Scalable Checkpoint/Restart Library

    Energy Science and Technology Software Center (OSTI)

    2009-02-23

    The Scalable Checkpoint/Restart (SCR) library provides an interface that codes may use to worite our and read in application-level checkpoints in a scalable fashion. In the current implementation, checkpoint files are cached in local storage (hard disk or RAM disk) on the compute nodes. This technique provides scalable aggregate bandwidth and uses storage resources that are fully dedicated to the job. This approach addresses the two common drawbacks of checkpointing a large-scale application to amore » shared parallel file system, namely, limited bandwidth and file system contention. In fact, on current platforms, SCR scales linearly with the number of compute nodes. It has been benchmarked as high as 720GB/s on 1094 nodes of Atlas, which is nearly two orders of magnitude faster thanthe parallel file system.« less

  17. Appropriate Technology Library | Open Energy Information

    Open Energy Info (EERE)

    villageearth.orgappropriate-technologyappropriate-technology-library Cost: Paid Language: English The most comprehensive, compact, and cost effective appropriate technology...

  18. Biomass Scenario Model Scenario Library: Definitions, Construction...

    Office of Scientific and Technical Information (OSTI)

    Definitions, Construction, and Description Citation Details In-Document Search Title: Biomass Scenario Model Scenario Library: Definitions, Construction, and Description ...

  19. Energy Resource Library | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Education & Training » Energy Resource Library Energy Resource Library The U.S. Department of Energy (DOE) Office of Indian Energy resource library provides links to helpful resources for tribes on energy project development and financing on tribal lands. The library includes links to topically relevant publications, websites, videos, and more produced by the Office of Indian Energy and external organizations. The resources are specifically focused on energy topics that help promote tribal

  20. DNA Clone Ordering from Shotgun Clone Libraries

    Energy Science and Technology Software Center (OSTI)

    1995-11-28

    CORD is an implementation of an algorithm for determining the order of clones from shotgun clone libraries.

  1. ENDF/B-VI Release 3 Cross Section Library for Use with the MCNP Monte Carlo Code.

    Energy Science and Technology Software Center (OSTI)

    2003-12-16

    Version 00 This continuous energy cross-section data library for MCNP is in ACE format. The present library was satisfactorily tested in thermal and fast criticality benchmarks. For analyses below 20 MeV, MCB63NEA.BOLlB was applied also in cell and core calculations dedicated to the study of the subcritical accelerator driven systems (ADS). This library provides users an additional ENDF/B-VI based, continuous-energy and multi-temperature library for MCNP with an important feature: there is a perfect consistency withmore » the twin library MCJEFF22NEA.BOLIB already released, in terms of nuclear data processing calculation methodology. Both libraries are based on the NJOY-94.66 data processing system. This may be important, in particular, for the users involved in nuclear data validation who have already used the MCJEF22NEA.BOLIB library.« less

  2. Development of BAC libraries and integrated physical mapping of human chromosome 22 using BACs. Annual report, July 1994--June 1995

    SciTech Connect (OSTI)

    Kim, U.J.; Shizuya, Hiroaki; Simon, M.I.

    1995-12-31

    BACs and fosmids are stable, nonchimeric, and highly representative cloning systems. BACs maintain large-fragment genomic inserts (100 to 300 kb) that are easily prepared for most types of experiments, including DNA sequencing. The authors have improved the methods for generating BACs and developed extensive BAC libraries. They have constructed human BAC libraries with more than 175,000 clones from male fibroblast and sperm, and a mouse BAC library with more than 200,000 clones. The authors are currently expanding human library with the aim of achieving total 50X coverage human genomic library using sperm samples from anonymous donors.

  3. Webtrends Archives by Fiscal Year - Publication Library | Department...

    Broader source: Energy.gov (indexed) [DOE]

    EERE Publication and Product Library by fiscal year. Publication Library FY09 (1.85 MB) Publication Library FY10 (2.68 MB) Publication Library FY11 (2.96 MB) More Documents & ...

  4. TENDL-2011: TALYS-based Evaluated Nuclear Data Library

    SciTech Connect (OSTI)

    Rochman, D.; Koning, A. J.

    2012-07-01

    The 4. release of the TENDL library, TENDL-2011 (TALYS-based Evaluated Nuclear Data Library) is described. This library consists of a complete set of nuclear reaction data for incident neutrons, photons, protons, deuterons, tritons, helions and alpha particles, from 10-5 eV up to 200 MeV, for all isotopes from {sup 6}Li to {sup 281}Ds that are either stable of have a half-life longer than 1 second. All data are completely and consistently evaluated using a software system consisting of the TALYS-1.2 nuclear reaction code, and other programs to handle resonance data, experimental data, data from existing evaluations, and to provide the final ENDF-6 formatting. The result is a nuclear data library with mutually consistent reaction information for all isotopes and a quality that increases with yearly updates. To produce this library, TALYS input parameters are adjusted for many nuclides so that calculated cross sections agree with experimental data, while for important nuclides experimental data are directly included. All information is available on www.talys.eu and www.talys.eu/TENDL-2011. (authors)

  5. BERKELEY LAB WINDOW

    SciTech Connect (OSTI)

    Curcija, Dragan Charlie; Zhu, Ling; Czarnecki, Stephen; Mitchell, Robin D.; Kohler, Christian; Vidanovic, Simon V.; Huizenga, Charlie

    2015-03-06

    WINDOW features include: - Microsoft Windows TM interface - algorithms for the calculation of total fenestration product U-values and Solar Heat Gain Coefficient consistent with ASHRAE SPC 142, ISO 15099, and the National Fenestration Rating Council - a Condensation Resistance Index in accordance with the NFRC 500 Standard - and integrated database of properties - imports data from other LBNL window analysis software: - Import THERM file into the Frame Library - Import records from IGDB and OPtics5 into the Glass Library for the optical properties of coated and uncoated glazings, laminates, and applied films. Program Capabilities WINDOW 7.2 offers the following features: The ability to analyze products made from any combination of glazing layers, gas layers, frames, spacers, and dividers under any environmental conditions and at any tilt; The ability to model complex glazing systems such as venetian blinds and roller shades. Directly accessible libraries of window system components, (glazing systems, glazing layers, gas fills, frame and divider elements), and environmental conditions; The choice of working in English (IP), or Systeme International (SI) units; The ability to specify the dimensions and thermal properties of each frame element (header, sills, jamb, mullion) in a window; A multi-band (wavelength-by-wavelength) spectral model; A Glass Library which can access spectral data files for many common glazing materials from the Optics5database; A night-sky radiative model; A link with the DOE-2.1E and Energy Plus building energy analysis program. Performance Indices and Other Results For a user-defined fenestration system and user-defined environmental conditions, WINDOW calculates: The U-value, solar heat gain coefficient, shading coefficient, and visible transmittance for the complete window system; The U-value, solar heat gain coefficient, shading coefficient, and visible transmittance for the glazing system (center-of-glass values); The U-values of the

  6. BERKELEY LAB WINDOW

    Energy Science and Technology Software Center (OSTI)

    2015-03-06

    WINDOW features include: - Microsoft Windows TM interface - algorithms for the calculation of total fenestration product U-values and Solar Heat Gain Coefficient consistent with ASHRAE SPC 142, ISO 15099, and the National Fenestration Rating Council - a Condensation Resistance Index in accordance with the NFRC 500 Standard - and integrated database of properties - imports data from other LBNL window analysis software: - Import THERM file into the Frame Library - Import records frommore » IGDB and OPtics5 into the Glass Library for the optical properties of coated and uncoated glazings, laminates, and applied films. Program Capabilities WINDOW 7.2 offers the following features: The ability to analyze products made from any combination of glazing layers, gas layers, frames, spacers, and dividers under any environmental conditions and at any tilt; The ability to model complex glazing systems such as venetian blinds and roller shades. Directly accessible libraries of window system components, (glazing systems, glazing layers, gas fills, frame and divider elements), and environmental conditions; The choice of working in English (IP), or Systeme International (SI) units; The ability to specify the dimensions and thermal properties of each frame element (header, sills, jamb, mullion) in a window; A multi-band (wavelength-by-wavelength) spectral model; A Glass Library which can access spectral data files for many common glazing materials from the Optics5database; A night-sky radiative model; A link with the DOE-2.1E and Energy Plus building energy analysis program. Performance Indices and Other Results For a user-defined fenestration system and user-defined environmental conditions, WINDOW calculates: The U-value, solar heat gain coefficient, shading coefficient, and visible transmittance for the complete window system; The U-value, solar heat gain coefficient, shading coefficient, and visible transmittance for the glazing system (center-of-glass values); The U-values of

  7. Library Patrons in New York Check-Out Renewable Energy

    Broader source: Energy.gov [DOE]

    The new solar system on the Esopus Library in New York is expected to generate 31,200 kWh of electricity annually -- approximately 30 percent of the library’s electricity use and a savings of nearly $4,000 in energy costs each year.

  8. Cubit Adaptive Meshing Algorithm Library

    Energy Science and Technology Software Center (OSTI)

    2004-09-01

    CAMAL (Cubit adaptive meshing algorithm library) is a software component library for mesh generation. CAMAL 2.0 includes components for triangle, quad and tetrahedral meshing. A simple Application Programmers Interface (API) takes a discrete boundary definition and CAMAL computes a quality interior unstructured grid. The triangle and quad algorithms may also import a geometric definition of a surface on which to define the grid. CAMAL’s triangle meshing uses a 3D space advancing front method, the quadmore » meshing algorithm is based upon Sandia’s patented paving algorithm and the tetrahedral meshing algorithm employs the GHS3D-Tetmesh component developed by INRIA, France.« less

  9. Control Systems Security Publications Library | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    You can download a free copy of the Reader by visiting Adobe.) VULNERABILITY REPORTS PERIODICAL ARTICLES ENERGY SECTOR ROADMAP AND ROADMAP IMPLEMENTATION DOE NSTB PROGRAM PLANNING ...

  10. Library

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    November 2012 interactive map with all alternatives - Guide to finding your property online BPA's preferred alternative - November 2012 Route alternatives and options - May 2011...

  11. WAC - 173 - 220 - National Pollutant Discharge Elimination System...

    Open Energy Info (EERE)

    WAC - 173 - 220 - National Pollutant Discharge Elimination System Permit Program Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document-...

  12. Title 40 CFR 260: Hazardous Waste Management System: General...

    Open Energy Info (EERE)

    : Hazardous Waste Management System: General Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- RegulationRegulation: Title 40 CFR 260: Hazardous...

  13. Montana Ground Water Pollution Control System Permit Application...

    Open Energy Info (EERE)

    Ground Water Pollution Control System Permit Application Forms Webpage Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Montana Ground Water Pollution...

  14. Understanding The Chena Hot Springs, Alaska, Geothermal System...

    Open Energy Info (EERE)

    The Chena Hot Springs, Alaska, Geothermal System Using Temperature And Pressure Data From Exploration Boreholes Jump to: navigation, search OpenEI Reference LibraryAdd to library...

  15. Oregon Rulemaking Announcement for Onsite Septic System Program...

    Open Energy Info (EERE)

    OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - Supplemental Material: Oregon Rulemaking Announcement for Onsite Septic System ProgramPermittingRegulatory...

  16. National Geothermal Data System (NGDS) Geothermal Data Domain...

    Open Energy Info (EERE)

    Geothermal Data System (NGDS) Geothermal Data Domain: Assessment of Geothermal Community Data Needs Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference...

  17. Reconnaissance geophysical studies of the geothermal system in...

    Open Energy Info (EERE)

    Reconnaissance geophysical studies of the geothermal system in southern Raft River Valley, Idaho Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article:...

  18. Geology and alteration of the Raft River geothermal system, Idaho...

    Open Energy Info (EERE)

    Raft River geothermal system, Idaho Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Proceedings: Geology and alteration of the Raft River geothermal...

  19. Helium isotopes in geothermal systems- Iceland, The Geysers,...

    Open Energy Info (EERE)

    isotopes in geothermal systems- Iceland, The Geysers, Raft River and Steamboat Springs Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article: Helium...

  20. A Brief Classification of Geothermal Systems | Open Energy Information

    Open Energy Info (EERE)

    LibraryAdd to library General: A Brief Classification of Geothermal Systems Author Paul Brophy Published GRC Annual Meeting, 2007 DOI Not Provided Check for DOI availability:...

  1. MOX Cross-Section Libraries for ORIGEN-ARP

    SciTech Connect (OSTI)

    Gauld, I.C.

    2003-07-01

    The use of mixed-oxide (MOX) fuel in commercial nuclear power reactors operated in Europe has expanded rapidly over the past decade. The predicted characteristics of MOX fuel such as the nuclide inventories, thermal power from decay heat, and radiation sources are required for design and safety evaluations, and can provide valuable information for non-destructive safeguards verification activities. This report describes the development of computational methods and cross-section libraries suitable for the analysis of irradiated MOX fuel with the widely-used and recognized ORIGEN-ARP isotope generation and depletion code of the SCALE (Standardized Computer Analyses for Licensing Evaluation) code system. The MOX libraries are designed to be used with the Automatic Rapid Processing (ARP) module of SCALE that interpolates appropriate values of the cross sections from a database of parameterized cross-section libraries to create a problem-dependent library for the burnup analysis. The methods in ORIGEN-ARP, originally designed for uranium-based fuels only, have been significantly upgraded to handle the larger number of interpolation parameters associated with MOX fuels. The new methods have been incorporated in a new version of the ARP code that can generate libraries for low-enriched uranium (LEU) and MOX fuel types. The MOX data libraries and interpolation algorithms in ORIGEN-ARP have been verified using a database of declared isotopic concentrations for 1042 European MOX fuel assemblies. The methods and data are validated using a numerical MOX fuel benchmark established by the Organization for Economic Cooperation and Development (OECD) Working Group on burnup credit and nuclide assay measurements for irradiated MOX fuel performed as part of the Belgonucleaire ARIANE International Program.

  2. Mili I/O Library

    Energy Science and Technology Software Center (OSTI)

    1996-08-23

    Mili is a high-level mesh I/O library and database developed to support computational analysis and post-processing on unstructured finite element meshes. Mili provides is self-describing database with high-level, finite element analysis-cognizant semantics, and cross-platform data portability. Mili provides analysis codes with the capability to completely describe and label the state data, which will be output do disk. Mili has both C and FORTRAN interfaces and provides for database portability by supporting both big-and little-endian binarymore » formats.« less

  3. DOE - NNSA/NFO -- Photo Library Underground Testing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Underground Testing NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office Photo Library - Underground Testing Between 1951 and 1992, 828 underground nuclear tests were conducted in specially drilled shafts, horizontal tunnels and craters at the Nevada National Security Site. Most vertical shaft tests assisted in the development of new weapon systems. Horizontal tunnel tests occurred to evaluate the effects (radiation, ground shock) of various weapons on military hardware and systems.

  4. Solar heating and cooling system installed at RKL Controls Company, Lumberton, New Jersey. Final report

    SciTech Connect (OSTI)

    1981-03-01

    Solar heating and cooling of a 40,000 square foot manufacturing building, sales offices and the solar computer control center/display room are described. Information on system description, test data, major problems and resolutions, performance, operation and maintenance manual, manufacturer's literature and as-built drawings are provided also. The solar system is composed of 6000 square feet of Sunworks double glazed flat plate collectors, external above ground storage subsystem, controls, ARKLA absorption chiller, heat recovery and a cooling tower.

  5. Video Library | National Nuclear Security Administration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Library | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy...

  6. Basic Matrix Library (bml), Version 0.x

    Energy Science and Technology Software Center (OSTI)

    2015-11-24

    The basic matrix library (bml) is a collection of various matrix data formats (in dense and sparse) and their associated algorithms for basic matrix operations.

  7. Women in STEM Panel @Mesa Public Library

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Women in STEM Panel @Mesa Public Library Women in STEM Panel @Mesa Public Library WHEN: Oct 15, 2015 7:00 PM - Feb 12, 2015 8:30 PM WHERE: Mesa Public Library 2400 Central Ave, Los Alamos, NM 87544 SPEAKER: Nicole-Lloyd-Ronning, Teri Roberts and Sandy Frost CATEGORY: Bradbury INTERNAL: Calendar Login Ada Lovelace day image Event Description Join the speakers for a conversation about women in STEM. In association with the Bradbury Science Museum. Women in STEM Panel @Mesa Public Library Join

  8. C++ Utility Library V4.0

    Energy Science and Technology Software Center (OSTI)

    2010-04-28

    A C++ utility library that provides abstractions for common data types with debugging features, support for I/O redirection and support for portability.

  9. Berkeley Unified Parallel C (UPC) Runtime Library

    Energy Science and Technology Software Center (OSTI)

    2003-03-31

    This software comprises a portable, open source implementation of a runtime library to support applications written in the Unified Parallel C (UPC) language. This library implements the UPC-specific functionality, including shared memory allocation and locks. The network-dependent functionality is implemented as a thin wrapper around a separate library implementing the GASNet (Global-Address Space Networking) specification. For true shared memory machines. GASNet is bypassed in favor of direct memory operations and local synchronization mechanisms. The Berkeleymore » UPC Runtime Library is currently the only implementation of the "Berkeley UPC Runtime Specification", and thus the only runtme library usable with the Berkeley UPC Compiler. Also, it is the only UPC runtime known to the author to provide two shared pointer representations: one for arbitrary blocksizes and one to optimize for the common cases of phaseless and blocksize=1. For distributed memory environments a library implementing the GASNet (Global-Address Space Networking) specification is required for communication. While no specialized hardware is required, a high-speed interconnet supported by the GASNet implementation is suggested for preformance. If no supported high-speed interconnect is available. GASNet can run over MPI. An external library is reqired for certain local memory allocation operations. A well defined interface allows for multiple implementations of this library, but at present the "umalloc" library from LBNL is the only compatible implementation.« less

  10. Tag: Library | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    technical reports to save time and space; some are used also in correspondence and in speaking. More... Category: Library Images Browse through images of our mission-related...

  11. Library and Compiler Tracking | Argonne Leadership Computing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Documentation Feedback Please provide feedback to help guide us as we continue to build documentation for our new computing resource. Feedback Form Library and Compiler Tracking...

  12. Aries Network Performance Counters Monitoring Library

    Energy Science and Technology Software Center (OSTI)

    2014-09-04

    AriesNCL is a library to monitor and record network router tile performance counters on the Aries router of Cray's Cascade/XC30 platform.

  13. Procedure to Generate the MPACT Multigroup Library

    SciTech Connect (OSTI)

    Kim, Kang Seog

    2015-12-17

    The CASL neutronics simulator MPACT is under development for the neutronics and T-H coupled simulation for the light water reactor. The objective of this document is focused on reviewing the current procedure to generate the MPACT multigroup library. Detailed methodologies and procedures are included in this document for further discussion to improve the MPACT multigroup library.

  14. Multi-registration of software library resources

    DOE Patents [OSTI]

    Archer, Charles J.; Blocksome, Michael A.; Ratterman, Joseph D.; Smith, Brian E.

    2011-04-05

    Data communications, including issuing, by an application program to a high level data communications library, a request for initialization of a data communications service; issuing to a low level data communications library a request for registration of data communications functions; registering the data communications functions, including instantiating a factory object for each of the one or more data communications functions; issuing by the application program an instruction to execute a designated data communications function; issuing, to the low level data communications library, an instruction to execute the designated data communications function, including passing to the low level data communications library a call parameter that identifies a factory object; creating with the identified factory object the data communications object that implements the data communications function according to the protocol; and executing by the low level data communications library the designated data communications function.

  15. Biomass Scenario Model Scenario Library: Definitions, Construction, and Description

    SciTech Connect (OSTI)

    Inman, D.; Vimmerstedt, L.; Bush, B.; Peterson, S.

    2014-04-01

    Understanding the development of the biofuels industry in the United States is important to policymakers and industry. The Biomass Scenario Model (BSM) is a system dynamics model of the biomass-to-biofuels system that can be used to explore policy effects on biofuels development. Because of the complexity of the model, as well as the wide range of possible future conditions that affect biofuels industry development, we have not developed a single reference case but instead developed a set of specific scenarios that provide various contexts for our analyses. The purpose of this report is to describe the scenarios that comprise the BSM scenario library. At present, we have the following policy-focused scenarios in our library: minimal policies, ethanol-focused policies, equal access to policies, output-focused policies, technological diversity focused, and the point-of-production- focused. This report describes each scenario, its policy settings, and general insights gained through use of the scenarios in analytic studies.

  16. DOE - NNSA/NFO -- Photo Library First Responder

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    First Responder Training NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office Photo Library - First Responder Training The aim of the First Responder Training is to provide a comprehensive, fully integrated system of facilities and capabilities to meet a wide range of combating terrorism requirements. Users of the First Responder Training can accomplish multiple requirements, conduct training and exercises in a variety of complex scenarios, and test new technologies in realistic

  17. Solar space and water heating system at Stanford University Central Food Services Building. Final report

    SciTech Connect (OSTI)

    Not Available

    1980-05-01

    This active hydronic domestic hot water and space heating system was 840 ft/sup 2/ of single-glazed, liquid, flat plate collectors and 1550 gal heat storage tanks. The following are discussed: energy conservation, design philosophy, operation, acceptance testing, performance data, collector selection, bidding, costs, economics, problems, and recommendations. An operation and maintenance manual and as-built drawings are included in appendices. (MHR)

  18. Fuel Cell Technologies Office Publication and Product Library

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Fuel Cell Technologies Office Publication & Product Library Fuel Cell Technologies Office Home Publication and Product Library Share this resource Publications Advanced Search ...

  19. Building Energy Modeling Library - 2013 BTO Peer Review | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building Energy Modeling Library - 2013 BTO Peer Review Building Energy Modeling Library - 2013 BTO Peer Review Commercial Buildings Integration Project for the 2013 Building...

  20. DOE - NNSA/NFO -- Photo Library Nevada National Security Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Library > Nevada National Security Site NNSANFO Language Options U.S. DOENNSA - Nevada Field Office Photo Library - Nevada National Security Site A unique national resource, the ...

  1. Introducing The National Library of Energy (Beta), New Search...

    Office of Scientific and Technical Information (OSTI)

    The Department of Energy (DOE) Office of Scientific and Technical Information (OSTI) has launched the National Library of EnergyBeta (NLEBeta), a virtual library and open ...

  2. Transmission/Resource Library/NEPA | Open Energy Information

    Open Energy Info (EERE)

    Library Jump to: navigation, search ResourceLibraryHeader.png Planning Public Involvement GIS Tools and Maps Environmental Resources and Mitigation NEPA MOUs General...

  3. DLFM library tools for large scale dynamic applications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    applications DLFM library tools for large scale dynamic applications Large scale Python and other dynamic applications may spend huge time at startup. The DLFM library,...

  4. Library Analog Semiconductor Devices SPICE Simulators

    Energy Science and Technology Software Center (OSTI)

    1996-07-23

    SPICE-SANDIA.LIB is a library of parameter sets and macromodels of semiconductor devices. They are used with Spice-based (SPICE is a program for electronic circuit analysis) simulators to simulate electronic circuits.

  5. General Counsel Law Library | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    IS UNDER CONSTRUCTION... Contact us with any questions: Law Librarian (202) 586-4849 Law.Library@hq.doe.gov Legislative History Librarian 202-586-2886 Careers & Internships Sign Up...

  6. YUMMY: The Yucca Mountain MCNP-Library

    SciTech Connect (OSTI)

    Alpan, FA

    2004-12-10

    Point-wise libraries provided with the MCNP code contain neutron data for a limited number of temperatures. However, it is important to have the option of using data from a wide range of temperatures for transport calculations. For this purpose, a multi-temperature, ACE-format neutron library was generated for 134 nuclides, as requested by Yucca Mountain Project (YMP) staff. The library is referred to as YUMMY (YUcca Mountain MCNP-librarY). The neutron cross section data are based on ENDF/B-V or ENDF/B-VI evaluations that were requested by YMP staff. This document provides the details of the new library and its use in criticality safety benchmark problems, a Pressurized Water Reactor design and waste package models in MCNP4C.

  7. DOE - NNSA/NFO -- Photo Library General

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    General NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office Photo Library - General Photos related to the Nevada Field Office which do not fall under the other photo categories are located here. Instructions: Click the photograph THUMBNAIL to view the photograph details Click the Category, Number, or Date table header links to sort the information. Thumbnail Category Number Date http://www.nv.doe.gov/library/photos/thumbs/nf1648.jpg General

  8. DOE - NNSA/NFO -- Photo Library Scenery

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Scenery NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office Photo Library - Scenery The Nevada National Security Site boasts beautiful scenery with many bluffs, hills, valleys, plains, and mountains. Instructions: Click the photograph THUMBNAIL to view the photograph details Click the Category, Number, or Date table header links to sort the information Thumbnail Category Number Date http://www.nv.doe.gov/library/photos/thumbs/DSC01563.jpg Scenery

  9. Section 999 Program Library | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Oil & Gas » Offshore Drilling » Section 999 Program Library Section 999 Program Library Cost-Shared Program Publications October 2, 2013 UDAC Meeting - October 2013 October 2, 2013 URTAC Meeting - October 2013 September 10, 2013 Draft 2014 Annual Plan More Ultra-Deepwater Advisory Committee (UDAC) Activities and Products January 27, 2014 UDAC 2014 Report November 27, 2013 UDAC Meeting - December 16, 2013 November 20, 2013 UDAC Meeting - December 9, 2013 More Unconventional Resources

  10. Annex C. Data Libraries for IAEA Nuclear Security Assessment Methodologies (NUSAM)

    SciTech Connect (OSTI)

    Shull, D.; Lane, M.

    2015-06-23

    Data Libraries are a collection of experimental data for PP elements based on specific defeat mechanisms. The data can de related to probability of detection, assessment, or barrier delay times. The data libraries can be a manually tabulated list or an electronic menu values enbedded in a stand-alone database or in an assessment software program such as SAVI or EASI. Data library values are usually based on years of historical testing data for many forms of common and sometimes unique PPS systems. Most useful testing libraries include data from the most basic alarm sensors, doors, walls, and barriers to very sophisticated PP elements. Each PP element is tested using increasing levels of defeat techniques from hand tools, power tools, breaching tools, explosives, and vehicles, as applicable.

  11. DLFM library tools for large scale dynamic applications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DLFM library tools for large scale dynamic applications DLFM library tools for large scale dynamic applications Large scale Python and other dynamic applications may spend huge time at startup. The DLFM library, developed by Mike Davis at Cray, Inc., is a set of functions that can be incorporated into a dynamically-linked application to provide improved performance during the loading of dynamic libraries when running the application at large scale on Edison. To access this library, do module

  12. Method and apparatus for filling thermal insulating systems

    DOE Patents [OSTI]

    Arasteh, Dariush K. (Oakland, CA)

    1992-01-01

    A method for filling insulated glazing units is disclosed. The method utilizes a vacuum chamber in which the insulated glazing units are placed. The insulated glazing units and vacuum chamber are evacuated simultaneously. The units are then refilled with a low conductance gas such as Krypton while the chamber is simultaneously refilled with air.

  13. Method and apparatus for filling thermal insulating systems

    DOE Patents [OSTI]

    Arasteh, D.K.

    1992-01-14

    A method for filling insulated glazing units is disclosed. The method utilizes a vacuum chamber in which the insulated glazing units are placed. The insulated glazing units and vacuum chamber are evacuated simultaneously. The units are then refilled with a low conductance gas such as Krypton while the chamber is simultaneously refilled with air. 3 figs.

  14. Document Library | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and evolution of the gasliquid brinesalt system. September 20, 2013 Nuclear Science and Engineering Education Sourcebook The Nuclear Science and Engineering Education Sourcebook...

  15. Proton Reaction Data Library for Nuclear Activation (Medium Energy Nuclear Data Library.)

    Energy Science and Technology Software Center (OSTI)

    2002-03-01

    Version 00 GROUPXS does file handling and processing of the double-differential continuum-emission cross sections stored in the new MF6 format of ENDF/VI. It treats the energy-angle data that are supposed to be represented by a Legendre-polynomial expansion in the center-of-mass system and can do the following: (1) Conversion of MF6 data from center-of-mass system to the laboratory system, with the possibility to continue the calculation with the options (2), (3), and (4). (2) Conversion ofmore » Legendre-polynomial representation into point-wise angular data, in MF6 format. (3) Conversion of data from MF6 into MF4 + MF5 (ENDF-V). (4) Calculation of group constants, scattering matrices and transfer matrices for arbitrary group structures with a fusion micro-flux weighting spectrum (PN-approximation). The code treats only continuum reaction types that are stored in the MF6 format with the restrictions as specified for the European Fusion File (EFF1). These restrictions are not inconvenient for the purpose of fusion neutronics calculations and they facilitate relatively simple processing . This neutron reaction data library can be used for nuclear activation and transmutation applications at energies up to 100 MeV.« less

  16. Multi Platform Graphics Subroutine Library

    Energy Science and Technology Software Center (OSTI)

    1992-02-21

    DIGLIB is a collection of general graphics subroutines. It was designed to be small, reasonably fast, device-independent, and compatible with DEC-supplied operating systems for VAXes, PDP-11s, and LSI-11s, and the DOS operating system for IBM PCs and IBM-compatible machines. The software is readily usable by casual programmers for two-dimensional plotting.

  17. Perl Extension to the Bproc Library

    Energy Science and Technology Software Center (OSTI)

    2004-06-07

    The Beowulf Distributed process Space (Bproc) software stack is comprised of UNIX/Linux kernel modifications and a support library by which a cluster of machines, each running their own private kernel, can present itself as a unified process space to the user. A Bproc cluster contains a single front-end machine and many back-end nodes which receive and run processes given to them by the front-end. Any process which is migrated to a back-end node is alsomore » visible as a ghost process on the fron-end, and may be controlled there using traditional UNIX semantics (e.g. ps(1), kill(1), etc). This software is a Perl extension to the Bproc library which enables the Perl programmer to make direct calls to functions within the Bproc library. See http://www.clustermatic.org, http://bproc.sourceforge.net, and http://www.perl.org« less

  18. The MultiThreaded Graph Library (MTGL)

    Energy Science and Technology Software Center (OSTI)

    2008-07-17

    The MultiThreaded Graph Library (MTGL) is a set of header files that implement graph algorithm in such a way that they can run on massively multithreaded architectures. It is based upon the Boost Graph Library, but doesn’t use Boost since the latter doesn’t run well on these architectures.

  19. EXFOR Library of Experimental Nuclear Reaction Data

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    The EXFOR library contains an extensive compilation of experimental nuclear reaction data up to 1 GeV. Neutron reactions have been compiled systematically since the discovery of the neutron, while charged particle(up to carbon) and photon reactions have been covered less extensively. Files contain nuclear reaction data such as cross sections, spectra, angular distributions, polarizations, etc, along with information on experimental technique, error analysis, and applied standards. Numerous search parameters include: target, beam, product, experimental method, and even author and publication names. The library contains data from more than 20,000 experiments. (Specialized Interface)

  20. DOE - NNSA/NFO -- Photo Library RadNucCTEC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    RadNucCTEC NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office Photo Library - RadNucCTEC The Radiological/Nuclear Countermeasures Test and Evaluation Complex (Rad/NucCTEC) will allow crucial security research to prevent radiological or nuclear materials that could be used as dirty bombs, from entering the country. The evaluation of radiation seNFOrs and detection systems are a few of the activities the complex will support. The Department of Homeland Security has provided funding to

  1. Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR): Programmer's guide

    SciTech Connect (OSTI)

    Call, O. J.; Jacobson, J. A.

    1988-09-01

    The Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR) is an automated data base management system for processing and storing human error probability and hardware component failure data. The NUCLARR system software resides on an IBM (or compatible) personal micro-computer and can be used to furnish data inputs for both human and hardware reliability analysis in support of a variety of risk assessment activities. The NUCLARR system is documented in a five-volume series of reports. Volume 2 of this series is the Programmer's Guide for maintaining the NUCLARR system software. This Programmer's Guide provides, for the software engineer, an orientation to the software elements involved, discusses maintenance methods, and presents useful aids and examples. 4 refs., 75 figs., 1 tab.

  2. Gamma-ray Spectral Analysis Algorithm Library

    Energy Science and Technology Software Center (OSTI)

    1997-09-25

    The routines of the Gauss Algorithm library are used to implement special purpose products that need to analyze gamma-ray spectra from GE semiconductor detectors as a part of their function. These routines provide the ability to calibrate energy, calibrate peakwidth, search for peaks, search for regions, and fit the spectral data in a given region to locate gamma rays.

  3. Gamma-ray spectral analysis algorithm library

    Energy Science and Technology Software Center (OSTI)

    2013-05-06

    The routines of the Gauss Algorithms library are used to implement special purpose products that need to analyze gamma-ray spectra from Ge semiconductor detectors as a part of their function. These routines provide the ability to calibrate energy, calibrate peakwidth, search for peaks, search for regions, and fit the spectral data in a given region to locate gamma rays.

  4. The Light-Weight Group Library

    Energy Science and Technology Software Center (OSTI)

    2012-07-02

    The Light-Weight Group (LWGRP) bibrary provides data structures and collective routines to define and operate on groups of MPI processes. Groups can be created and freed efficiently in O(log N) time space requiring less overhead that constructing full MPI communicators. This facilitates faster development of applications and libraries that need to rapidly create, use, and destroy process groups.

  5. Element Agglomeration Algebraic Multigrid and Upscaling Library

    Energy Science and Technology Software Center (OSTI)

    2015-02-11

    ELAG is a serial C++ library for numerical upscaling of finite element discretizations. It provides optimal complexity algorithms to build multilevel hierarchies and solvers that can be used for solving a wide class of partial differential equation (elliptic, hyperbolic, saddle point problems) on general unstructured mesh. Additionally, a novel multilevel solver for saddle point problems with divergence constraint is implemented.

  6. Idaho On-Site Wastewater Systems Webpage | Open Energy Information

    Open Energy Info (EERE)

    Systems Webpage Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Idaho On-Site Wastewater Systems Webpage Abstract This webpage provides an...

  7. General Permit for Small Municipal Separate Storm Sewer Systems...

    Open Energy Info (EERE)

    Storm Sewer Systems Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: General Permit for Small Municipal Separate Storm Sewer Systems Abstract Permit...

  8. RRC - Online Drilling Permit System Login webpage | Open Energy...

    Open Energy Info (EERE)

    System Login webpage Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: RRC - Online Drilling Permit System Login webpage Abstract This is the login...

  9. Resolved: "error while loading shared libraries: libalpslli.so...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    "error while loading shared libraries: libalpslli.so.0" with serial codes on login nodes Resolved: "error while loading shared libraries: libalpslli.so.0" with serial codes on...

  10. Scaling up the 454 Titanium Library Construction and Pooling of Barcoded Libraries

    SciTech Connect (OSTI)

    Phung, Wilson; Hack, Christopher; Shapiro, Harris; Lucas, Susan; Cheng, Jan-Fang

    2009-03-23

    We have been developing a high throughput 454 library construction process at the Joint Genome Institute to meet the needs of de novo sequencing a large number of microbial and eukaryote genomes, EST, and metagenome projects. We have been focusing efforts in three areas: (1) modifying the current process to allow the construction of 454 standard libraries on a 96-well format; (2) developing a robotic platform to perform the 454 library construction; and (3) designing molecular barcodes to allow pooling and sorting of many different samples. In the development of a high throughput process to scale up the number of libraries by adapting the process to a 96-well plate format, the key process change involves the replacement of gel electrophoresis for size selection with Solid Phase Reversible Immobilization (SPRI) beads. Although the standard deviation of the insert sizes increases, the overall quality sequence and distribution of the reads in the genome has not changed. The manual process of constructing 454 shotgun libraries on 96-well plates is a time-consuming, labor-intensive, and ergonomically hazardous process; we have been experimenting to program a BioMek robot to perform the library construction. This will not only enable library construction to be completed in a single day, but will also minimize any ergonomic risk. In addition, we have implemented a set of molecular barcodes (AKA Multiple Identifiers or MID) and a pooling process that allows us to sequence many targets simultaneously. Here we will present the testing of pooling a set of selected fosmids derived from the endomycorrhizal fungus Glomus intraradices. By combining the robotic library construction process and the use of molecular barcodes, it is now possible to sequence hundreds of fosmids that represent a minimal tiling path of this genome. Here we present the progress and the challenges of developing these scaled-up processes.

  11. OSTIblog Articles in the Special Libraries Association Topic | OSTI, US

    Office of Scientific and Technical Information (OSTI)

    Dept of Energy Office of Scientific and Technical Information Special Libraries Association Topic Special Libraries Association President Visits Tennessee by Erin Anderson 13 Nov, 2013 in Personal Perspectives 10223 SLA%20Visit.jpg Special Libraries Association President Visits Tennessee Read more about 10223 In honor of the 60th Anniversary of the local Tennessee Valley Chapter (TVC) of the Special Libraries Association (SLA), International SLA President Deborah Hunt recently visited

  12. Webtrends Archives by Fiscal Year — Publication Library

    Office of Energy Efficiency and Renewable Energy (EERE)

    From the EERE Web Statistics Archive: Corporate sites, Webtrends archives for the EERE Publication and Product Library by fiscal year.

  13. C++ LIBRARY OF ALOGRITHMS FOR STOCHASTIC GLOBAL OPTIMIZATION

    Energy Science and Technology Software Center (OSTI)

    2001-10-25

    SGOPT is a C++ library that includes implementations of several algorithms for stochastic global optimization and derivative free optimization.

  14. Conduit - Scientific Data Exchange Library for HPC Simulations

    Energy Science and Technology Software Center (OSTI)

    2014-10-22

    Conduit is a C++ software library that helps software developers with data representation and data exchange in scientific simulations

  15. Furth Plasma Physics Library | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research Education Organization Business Operations Careers/ Human Resources Directory Diversity and Inclusion Environment, Safety & Health Furth Plasma Physics Library Lab Leadership Organization Chart Technology Transfer Contact Us Business Operations Careers/ Human Resources Directory Diversity and Inclusion Environment, Safety & Health Furth Plasma Physics Library Lab Leadership Organization Chart Technology Transfer Furth Plasma Physics Library The Harold P. Furth Plasma Physics

  16. Library_shelves_small.jpg | OSTI, US Dept of Energy Office of Scientific

    Office of Scientific and Technical Information (OSTI)

    and Technical Information Library_shelves_small

  17. OSTIblog Articles in the british library Topic | OSTI, US Dept of Energy

    Office of Scientific and Technical Information (OSTI)

    Office of Scientific and Technical Information british library

  18. Use of Data Libraries for IAEA Nuclear Security Assessment Methodologies (NUSAM) [section 5.4

    SciTech Connect (OSTI)

    Shull, D.; Lane, M.

    2015-06-23

    Data libraries are essential for the characterization of the facility and provide the documented input which enables the facility assessment results and subsequent conclusions. Data Libraries are historical, verifiable, quantified, and applicable collections of testing data on different types of barriers, sensors, cameras, procedures, and/or personnel. Data libraries are developed and maintained as part of any assessment program or process. Data is collected during the initial stages of facility characterization to aid in the model and/or simulation development process. Data library values may also be developed through the use of state testing centers and/or site resources by testing different types of barriers, sensors, cameras, procedures, and/or personnel. If no data exists, subject matter expert opinion and manufacturer's specifications/ testing values can be the basis for initially assigning values, but are generally less reliable and lack appropriate confidence measures. The use of existing data libraries that have been developed by a state testing organization reduces the assessment costs by establishing standard delay, detection and assessment values for use by multiple sites or facilities where common barriers and alarms systems exist.

  19. Physics History Books in the Fermilab Library

    SciTech Connect (OSTI)

    Sara Tompson.

    1999-09-17

    Fermilab is a basic research high-energy physics laboratory operated by Universities Research Association, Inc. under contract to the U.S. Department of Energy. Fermilab researchers utilize the Tevatron particle accelerator (currently the worlds most powerful accelerator) to better understand subatomic particles as they exist now and as they existed near the birth of the universe. A collection review of the Fermilab Library monographs was conducted during the summers of 1998 and 1999. While some items were identified for deselection, the review proved most fruitful in highlighting some of the strengths of the Fermilab monograph collection. One of these strengths is history of physics, including biographies and astrophysics. A bibliography of the physics history books in the collection as of Summer, 1999 follows, arranged by author. Note that the call numbers are Library of Congress classification.

  20. Simulating the Daylight Performance of Complex Fenestration Systems Using Bidirectional Scattering Distribution Functions within Radiance

    SciTech Connect (OSTI)

    Ward, Gregory; Mistrick, Ph.D., Richard; Lee, Eleanor; McNeil, Andrew; Jonsson, Ph.D., Jacob

    2011-01-21

    We describe two methods which rely on bidirectional scattering distribution functions (BSDFs) to model the daylighting performance of complex fenestration systems (CFS), enabling greater flexibility and accuracy in evaluating arbitrary assemblies of glazing, shading, and other optically-complex coplanar window systems. Two tools within Radiance enable a) efficient annual performance evaluations of CFS, and b) accurate renderings of CFS despite the loss of spatial resolution associated with low-resolution BSDF datasets for inhomogeneous systems. Validation, accuracy, and limitations of the methods are discussed.

  1. FETI Prime Domain Decomposition base Parallel Iterative Solver Library Ver.1.0

    Energy Science and Technology Software Center (OSTI)

    2003-09-15

    FETI Prime is a library for the iterative solution of linear equations in solid and structural mechanics. The algorithm employs preconditioned conjugate gradients, with a domain decomposition-based preconditioner. The software is written in C++ and is designed for use with massively parallel computers, using MPI. The algorithm is based on the FETI-DP method, with additional capabilities for handling constraint equations, as well as interfacing with the Salinas structural dynamics code and the Finite Element Interfacemore » (FEI) library. Practical Application: FETI Prime is designed for use with finite element-based simulation codes for solid and structural mechanics. The solver uses element matrices, connectivity information, nodal information, and force vectors computed by the host code and provides back the solution to the linear system of equations, to the user specified level of accuracy, The library is compiled with the host code and becomes an integral part of the host code executable.« less

  2. DOE - NNSA/NFO -- Photo Library ATLAS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ATLAS NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office Photo Library - ATLAS Pulsed-Power Generator The ATLAS pulsed-power generator is one of many alternatives to underground nuclear testing. Pulsed power can concentrate high total energies on larger (centimeter-scale) experimental targets for relatively long periods of times compared to other Stockpile Stewardship experiments. Instructions: Click the photograph THUMBNAIL to view the photograph details Click the Category, Number,

  3. DOE - NNSA/NFO -- Photo Library Animals

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Animals NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office Photo Library - Animals Coyotes, kit foxes, pronghorn antelope, desert tortoises, sidewinder snakes, bald eagles, kangaroo rats and peregrine falcons are just a few of the more than 1,500 animal species found on the Nevada National Security Site. Instructions: Click the document THUMBNAIL to view the photograph details. Click the Category, Number, or Date table header links to sort the information. Thumbnail Category Number

  4. DOE - NNSA/NFO -- Photo Library BEEF

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    BEEF NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office Photo Library - Big Explosives Experimental Facility (BEEF) The Big Explosives Experimental Facility (BEEF) is a hydrodynamic testing facility, located at the Nevada National Security Site. BEEF provides data, through explosive experiments, to support the Stockpile Stewardship Program, along with a variety of new experimental programs that expand the nation's non-nuclear experiment capabilities. Instructions: Click the photograph

  5. DOE - NNSA/NFO -- Photo Library Craters

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Craters NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office Photo Library - Craters Underground testing often leaves visible evidence on the surface in the form of subsidence craters in varying dimensions. Subsidence craters are depressions on the surface that occur when the roof of the blast cavity collapses into the void left by the explosion. The size of the subsidence crater depends on the yield of the device, the depth of emplacement, and the geological characteristics of the

  6. DOE - NNSA/NFO -- Photo Library FRMAC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    FRMAC NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office Photo Library - Federal Radiological Monitoring and Assessment Center (FRMAC) The Federal Radiological Monitoring and Assessment Center gathers radiological information such as plume and deposition predictions, air and ground concentrations, exposure rates and dose projections, assurance of data quality, and current meteorological conditions and weather forecasts. Instructions: Click the photograph THUMBNAIL to view the

  7. DOE - NNSA/NFO -- Photo Library JASPER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    JASPER NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office Photo Library - JASPER The Joint Actinide Shock Physics Experimental Research Facility plays an integral role in the testing of the nation's nuclear weapons stockpile by providing a method to generate and measure data pertaining to the properties of materials (radioactive chemical elements) at high shock pressures, temperatures and strain rates. Instructions: Click the photograph THUMBNAIL to view the photograph details Click

  8. DOE - NNSA/NFO -- Photo Library NPTEC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NPTEC NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office Photo Library - Nonproliferation Test Evaluation Complex (NPTEC) The Nonproliferation Test Evaluation Complex is a unique, one-of-a-kind facility built to conduct hazardous materials testing and training under controlled conditions. The NPTEC can accommodate both large- and small-scale testing. Instructions: Click the photograph THUMBNAIL to view the photograph details Click the Category, Number, or Date table header links to

  9. DOE - NNSA/NFO -- Photo Library PLUMBBOB

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Operation Plumbob NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office Photo Library - Operation Plumbbob Operation Plumbbob, conducted between May 28 and October 7, 1957, represented the biggest, longest, and most controversial test series in the history of the Nevada National Security Site (NNSS). [ Full Text ] Instructions: Click the photograph THUMBNAIL to view the photograph details Click the Category, Number, or Date table header links to sort the information The photographs are

  10. DOE - NNSA/NFO -- Photo Library Plants

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Plants NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office Photo Library - Plants The Nevada National Security Site boasts more than 750 varieties of plants. About 67 families of plants are represented, however, one-third of them belong to just three families: sunflowers, grasses and buckwheats. Instructions: Click the photograph THUMBNAIL to view the photograph details. Click the Category, Number, or Date table header links to sort the information Thumbnail Category Number Date

  11. DOE - NNSA/NFO -- Photo Library Ranger

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ranger NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office Photo Library - Ranger Operation Ranger was the first continental nuclear test series conducted at the Nevada Proving Ground (now called the Nevada National Security Site). Instructions: Click the photograph THUMBNAIL to view the photograph details Click the Category, Number, or Date table header links to sort the information The photographs are displayed in groups of ten (10). Click the Next and Previous link at the bottom to

  12. DOE - NNSA/NFO -- Photo Library Trinity

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Trinity NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office Photo Library - Trinity Trinity Shot was part of the secret Manhattan Project - the atomic bomb project charged with designing, developing, testing, and firing a weaponization of the newly discovered phenomenon, fission. [ Full Text ] Instructions: Click the photograph THUMBNAIL to view the photograph details Click the Category, Number, or Date table header links to sort the information The photographs are displayed in groups

  13. Library | National Nuclear Security Administration | (NNSA)

    National Nuclear Security Administration (NNSA)

    Home Library Enterprise Strategic Vision: A foundational document that lays out the organization's vision for the future 20 Years of Success: A look at two decades of the Stockpile Stewardship Program Prevent, Counter, and Respond: A strategic plan to define and describe our missions to prevent, counter, and respond to the threats of nuclear proliferation and terrorism Stockpile Stewardship and Management Plan: NNSA's plan for maintaining and modernizing the stockpile, revitalizing its physical

  14. Library | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Home Library Enterprise Strategic Vision: A foundational document that lays out the organization's vision for the future 20 Years of Success: A look at two decades of the Stockpile Stewardship Program Prevent, Counter, and Respond: A strategic plan to define and describe our missions to prevent, counter, and respond to the threats of nuclear proliferation and terrorism Stockpile Stewardship and Management Plan: NNSA's plan for maintaining and modernizing the stockpile, revitalizing its physical

  15. Development and testing of a photometric method to identify non-operating solar hot water systems in field settings.

    SciTech Connect (OSTI)

    He, Hongbo; Vorobieff, Peter V.; Menicucci, David; Mammoli, Andrea A.; Carlson, Jeffrey J.

    2012-06-01

    This report presents the results of experimental tests of a concept for using infrared (IR) photos to identify non-operational systems based on their glazing temperatures; operating systems have lower glazing temperatures than those in stagnation. In recent years thousands of new solar hot water (SHW) systems have been installed in some utility districts. As these numbers increase, concern is growing about the systems dependability because installation rebates are often based on the assumption that all of the SHW systems will perform flawlessly for a 20-year period. If SHW systems routinely fail prematurely, then the utilities will have overpaid for grid-energy reduction performance that is unrealized. Moreover, utilities are responsible for replacing energy for loads that failed SHW system were supplying. Thus, utilities are seeking data to quantify the reliability of SHW systems. The work described herein is intended to help meet this need. The details of the experiment are presented, including a description of the SHW collectors that were examined, the testbed that was used to control the system and record data, the IR camera that was employed, and the conditions in which testing was completed. The details of the associated analysis are presented, including direct examination of the video records of operational and stagnant collectors, as well as the development of a model to predict glazing temperatures and an analysis of temporal intermittency of the images, both of which are critical to properly adjusting the IR camera for optimal performance. Many IR images and a video are presented to show the contrast between operating and stagnant collectors. The major conclusion is that the technique has potential to be applied by using an aircraft fitted with an IR camera that can fly over an area with installed SHW systems, thus recording the images. Subsequent analysis of the images can determine the operational condition of the fielded collectors. Specific

  16. Extending the QUDA Library with the eigCG Solver

    SciTech Connect (OSTI)

    Strelchenko, Alexei; Stathopoulos, Andreas

    2014-12-12

    While the incremental eigCG algorithm [ 1 ] is included in many LQCD software packages, its realization on GPU micro-architectures was still missing. In this session we report our experi- ence of the eigCG implementation in the QUDA library. In particular, we will focus on how to employ the mixed precision technique to accelerate solutions of large sparse linear systems with multiple right-hand sides on GPUs. Although application of mixed precision techniques is a well-known optimization approach for linear solvers, its utilization for the eigenvector com- puting within eigCG requires special consideration. We will discuss implementation aspects of the mixed precision deflation and illustrate its numerical behavior on the example of the Wilson twisted mass fermion matrix inversions

  17. DOE - NNSA/NFO -- Photo Library NRDS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NRDS NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office Photo Library - Nuclear Rocket Development Station (NRDS) The idea to use atomic energy to propel a rocket for interplanetary travel originated in 1906 when American space pioneer Robert Goddard, a college sophomore, wrote a paper on the use of atomic energy. The concept moved from theory to reality in the mid-1950s when the United States launched a nuclear rocket program called Project Rover. Refer to the following Fact Sheet

  18. 54 USC Subtitle I - National Park System | Open Energy Information

    Open Energy Info (EERE)

    54 USC Subtitle I - National Park System Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: 54 USC Subtitle I - National Park...

  19. ORS 454 - Sewage Treatment and Disposal Systems | Open Energy...

    Open Energy Info (EERE)

    54 - Sewage Treatment and Disposal Systems Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: ORS 454 - Sewage Treatment and...

  20. OAR 340-071 - On Site Wastewater Treatment Systems Definitions...

    Open Energy Info (EERE)

    1 - On Site Wastewater Treatment Systems Definitions Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- RegulationRegulation: OAR 340-071 - On Site...

  1. Title 48 CFR 1 Federal Acquisition Regulations System | Open...

    Open Energy Info (EERE)

    8 CFR 1 Federal Acquisition Regulations System Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- Federal RegulationFederal Regulation: Title 48 CFR...

  2. Reservoir Investigations on the Hot Dry Rock Geothermal System...

    Open Energy Info (EERE)

    Investigations on the Hot Dry Rock Geothermal System, Fenton Hill, New Mexico- Tracer Test Results Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference...

  3. The Bureau of Land Management's Well Information System (WIS...

    Open Energy Info (EERE)

    Bureau of Land Management's Well Information System (WIS) How-To Guide Jump to: navigation, search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - Guide...

  4. Adiabatic quantum-flux-parametron cell library adopting minimalist design

    SciTech Connect (OSTI)

    Takeuchi, Naoki; Yamanashi, Yuki; Yoshikawa, Nobuyuki

    2015-05-07

    We herein build an adiabatic quantum-flux-parametron (AQFP) cell library adopting minimalist design and a symmetric layout. In the proposed minimalist design, every logic cell is designed by arraying four types of building block cells: buffer, NOT, constant, and branch cells. Therefore, minimalist design enables us to effectively build and customize an AQFP cell library. The symmetric layout reduces unwanted parasitic magnetic coupling and ensures a large mutual inductance in an output transformer, which enables very long wiring between logic cells. We design and fabricate several logic circuits using the minimal AQFP cell library so as to test logic cells in the library. Moreover, we experimentally investigate the maximum wiring length between logic cells. Finally, we present an experimental demonstration of an 8-bit carry look-ahead adder designed using the minimal AQFP cell library and demonstrate that the proposed cell library is sufficiently robust to realize large-scale digital circuits.

  5. Method for construction of normalized cDNA libraries

    DOE Patents [OSTI]

    Soares, M.B.; Efstratiadis, A.

    1998-11-03

    This invention provides a method to normalize a directional cDNA library constructed in a vector that allows propagation in single-stranded circle form comprising: (a) propagating the directional cDNA library in single-stranded circles; (b) generating fragments complementary to the 3` noncoding sequence of the single-stranded circles in the library to produce partial duplexes; (c) purifying the partial duplexes; (d) melting and reassociating the purified partial duplexes to appropriate Cot; and (e) purifying the unassociated single-stranded circles, thereby generating a normalized cDNA library. This invention also provides normalized cDNA libraries generated by the above-described method and uses of the generated libraries. 19 figs.

  6. Method for construction of normalized cDNA libraries

    DOE Patents [OSTI]

    Soares, Marcelo B.; Efstratiadis, Argiris

    1998-01-01

    This invention provides a method to normalize a directional cDNA library constructed in a vector that allows propagation in single-stranded circle form comprising: (a) propagating the directional cDNA library in single-stranded circles; (b) generating fragments complementary to the 3' noncoding sequence of the single-stranded circles in the library to produce partial duplexes; (c) purifying the partial duplexes; (d) melting and reassociating the purified partial duplexes to appropriate Cot; and (e) purifying the unassociated single-stranded circles, thereby generating a normalized cDNA library. This invention also provides normalized cDNA libraries generated by the above-described method and uses of the generated libraries.

  7. Introducing The National Library of Energy (Beta), New Search Engine

    Office of Scientific and Technical Information (OSTI)

    Facilitating Access to Department of Energy Information | OSTI, US Dept of Energy Office of Scientific and Technical Information February 15, 2013 Introducing The National Library of EnergyBeta, New Search Engine Facilitating Access to Department of Energy Information The Department of Energy (DOE) Office of Scientific and Technical Information (OSTI) has launched the National Library of EnergyBeta (NLEBeta), a virtual library and open government resource to advance energy literacy,

  8. National Library of Energy (BETA): the Department of Energy's National

    Office of Scientific and Technical Information (OSTI)

    Resource for Energy Literacy, Innovation and Security - Communications Communications NLEBeta Announcement NLEBeta Articles & Blogs OSTI.gov Newsletter July/August 2014: National Library of EnergyBeta: Cool Search Tool for Summer Search Tip: National Library of EnergyBeta New Search OSTIblog, May 29, 2014: Refreshed National Library of EnergyBeta Takes on Expanded Role in Disseminating Department of Energy Scientific and Technical Information OSTIblog, September 26, 2013: The National

  9. Monte Carlo N–Particle Transport Code System Including MCNP6.1.1BETA, MCNP6.1, MCNP5-1.60, MCNPX-2.7.0 and Data Libraries.

    Energy Science and Technology Software Center (OSTI)

    2014-09-01

    Version 01 MCNP6™ is a general-purpose, continuous-energy, generalized-geometry, time-dependent, Monte Carlo radiation-transport code designed to track many particle types over broad ranges of energies. This MCNP6.1.1Beta is a follow-on to the MCNP6.1 production version which itself was the culmination of a multi-year effort to merge the MCNP5™ [X-503] and MCNPX™ [PEL11] codes into a single product. This MCNP6.1.1 beta has been released in order to provide the radiation transport community with the latest feature developmentsmore » and bug fixes in the code. MCNP6.1.1 has taken input from a group of people, residing in the Los Alamos National Laboratory's (LANL) X Computational Physics Division, Radiation Transport Group (XCP-3), and Nuclear Engineering and Nonproliferation Division, Systems Design and Analysis Group (NEN-5). They have combined their code development efforts to produce this next evolution of MCNP. For those familiar with previous versions of MCNP, you will discover the code has been expanded to handle a multitude of particles and to include model physics options for energies above the cross-section table range, a material burnup feature, and delayed particle production. Expanded and/or new tally, source, and variance-reduction options are available to the user as well as an improved plotting capability. The capability to calculate keff eigenvalues for fissile systems remains a standard feature. Although MCNP6 is simply and accurately described as the merger of MCNP5 and MCNPX capabilities, the result is much more than the sum of these two computer codes. MCNP6 is the result of five years of effort by the MCNP5 and MCNPX code development teams.« less

  10. Technology reviews: Shading systems

    SciTech Connect (OSTI)

    Schuman, J.; Rubinstein, F.; Papamichael, K.; Beltran, L.; Lee, E.S.; Selkowitz, S.

    1992-09-01

    We present a representative review of existing, emerging, and future technology options in each of five hardware and systems areas in envelope and lighting technologies: lighting systems, glazing systems, shading systems, daylighting optical systems, and dynamic curtain wall systems. The term technology is used here to describe any design choice for energy efficiency, ranging from individual components to more complex systems to general design strategies. The purpose of this task is to characterize the state of the art in envelope and lighting technologies in order to identify those with promise for advanced integrated systems, with an emphasis on California commercial buildings. For each technology category, the following activities have been attempted to the extent possible: Identify key performance characteristics and criteria for each technology. Determine the performance range of available technologies. Identify the most promising technologies and promising trends in technology advances. Examine market forces and market trends. Develop a continuously growing in-house database to be used throughout the project. A variety of information sources have been used in these technology characterizations, including miscellaneous periodicals, manufacturer catalogs and cut sheets, other research documents, and data from previous computer simulations. We include these different sources in order to best show the type and variety of data available, however publication here does not imply our guarantee of these data. Within each category, several broad classes are identified, and within each class we examine the generic individual technologies that fall into that class.

  11. National Library of Energy (BETA): the Department of Energy's...

    Office of Scientific and Technical Information (OSTI)

    Communications NLEBeta Announcement NLEBeta Articles & Blogs OSTI.gov Newsletter JulyAugust 2014: National Library of EnergyBeta: Cool Search Tool for Summer Search Tip: National ...

  12. OSTIblog Articles in the National Library of Energy (NLE) - Beta...

    Office of Scientific and Technical Information (OSTI)

    ... STIP is a robust and effective collaboration across the DOE... Related Topics: .EDUconnections, Adopt-A-Doc, DOE Green Energy, DOE STI, journal literature, National Library of ...

  13. Method for construction of normalized cDNA libraries

    DOE Patents [OSTI]

    Soares, M.B.; Efstratiadis, A.

    1996-01-09

    This invention provides a method to normalize a directional cDNA library constructed in a vector that allows propagation in single-stranded circle form. The method comprises: (a) propagating the directional cDNA library in single-stranded circles; (b) generating fragments complementary to the 3` noncoding sequence of the single-stranded circles in the library to produce partial duplexes; (c) purifying the partial duplexes; (d) melting and reassociating the purified partial duplexes to moderate Cot; and (e) purifying the unassociated single-stranded circles, thereby generating a normalized cDNA library. 4 figs.

  14. Method for construction of normalized cDNA libraries

    DOE Patents [OSTI]

    Soares, Marcelo B.; Efstratiadis, Argiris

    1996-01-01

    This invention provides a method to normalize a directional cDNA library constructed in a vector that allows propagation in single-stranded circle form comprising: (a) propagating the directional cDNA library in single-stranded circles; (b) generating fragments complementary to the 3' noncoding sequence of the single-stranded circles in the library to produce partial duplexes; (c) purifying the partial duplexes; (d) melting and reassociating the purified partial duplexes to moderate Cot; and (e) purifying the unassociated single-stranded circles, thereby generating a normalized cDNA library.

  15. Virginia Residents Check Out New Energy Lending Library

    Broader source: Energy.gov [DOE]

    Residential Network member Arlington County (VA) launched an Energy Lending Library on Earth Day that engaged residents and identified energy and money-saving opportunities.

  16. National Library of Medicine Web Resources for Student Health Professionals

    SciTech Connect (OSTI)

    Womble, R.

    2010-04-02

    Familiarize students affiliated with the Student National Medical Association with the National Library of Medicine's online resources that address medical conditions, health disparities, and public health preparedness needs.

  17. Genomic library construction (Patent) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Details In-Document Search Title: Genomic library construction Compositions and methods for amplifying nucleic acid sequences from a single cell are provided. Compositions...

  18. DOE - NNSA/NFO -- Nevada Field Office Film Library

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Films > Current NFO Films NNSANFO Language Options U.S. DOENNSA - Nevada Field Office Nevada Field Office Current Film Library Instructions: Click the Document Title or Thumbnail ...

  19. BETO Announces Launch of the Bioenergy KDF Legislative Library

    Broader source: Energy.gov [DOE]

    The Bioenergy Technologies Office is pleased to announce the release of a new Bioenergy Knowledge Discovery Framework (Bioenergy KDF) resource: the Legislative Library.

  20. Virginia Residents Check Out New Energy Lending Library | Department...

    Energy Savers [EERE]

    Virginia Residents Check Out New Energy Lending Library Graphic with six different images on it, including the Rethink Energy logo. Residential Network member Arlington County (VA) ...

  1. Notices Rapides Parish Rapides Parish Library, 411 Washington...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Notices Rapides Parish Rapides Parish Library, 411 Washington St., Alexandria, 15001005 ... (NPS), has made available for public review and comment the Draft Environmental ...

  2. FERC Online eLibrary | Open Energy Information

    Open Energy Info (EERE)

    Not Provided DOI Not Provided Check for DOI availability: http:crossref.org Online Internet link for FERC Online eLibrary Citation Federal Energy Regulatory Commission. FERC...

  3. National Library of Energy : Main View : Deep Federated Search

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National Library of Energy Search Powered By Deep Web Technologies New Search Preferences Powered by Deep Web Technologies energy.gov Office of Scientific and Technical Information...

  4. DOE - NNSA/NFO -- Photo Library Environmental Management

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Environmental Management NNSANFO Language Options U.S. DOENNSA - Nevada Field Office Photo Library - Environmental Management The Environmental Management Program VisionMission ...

  5. Blue Gene/Q Network Performance Counters Monitoring Library

    Energy Science and Technology Software Center (OSTI)

    2015-03-12

    BGQNCL is a library to monitor and record network performance counters on the 5D torus interconnection network of IBM's Blue Gene/Q platform.

  6. Antibody library project could unlock mysteries of human gene...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mysteries of human gene function Antibody library project could unlock mysteries of human gene function By looking at antibodies, researchers can identify where, in a cell, genes ...

  7. Fine-Group Cross Section Library Based on JEFF3.1 for Nuclear Fission Applications.

    Energy Science and Technology Software Center (OSTI)

    2009-10-16

    Version 00 The NJOY-99.160 data processing system was used for the MATJEFF31.BOLIB library generation to assure the consistency with the previous generation of the VITJEFF31.BOLIB /6/ twin library, based on the same GENDF cross section data file. In particular it used a revised version of the GROUPR /7/ module, originally developed in ENEA-Bologna before the free release of an analogous GROUPR revised version with NJOY-99.161, in order to correctly deal with the non-Cartesian interpolation schemes,more » contained in 69 JEFF-3.1 evaluated nuclear data files. The TRANSX-2.15 /8/ code was then used to obtain the total (prompt + delayed) fission spectra for U-235, U-238 and Pu-239. These data, contained in the MATJEFF31.BOLIB package, are available in tabulated form as in the VITJEFF31.BOLIB library package. On the contrary the VITAMIN-B6, VITJEF22.BOLIB /9/ and MATJEF22.BOLIB /10/ similar library packages contain in tabulated form only the prompt components. MATJEFF31.BOLIB is a pseudo-problem-independent library based on the Bondarenko /11/ (f-factor) method for the treatment of neutron resonance self-shielding and temperature effects. The library contains 176 nuclides at 4 temperatures, obtained for the most part with 6 to 8 values for the background cross section. Thermal scattering cross sections were processed at all temperatures available in the JEFF-3.1 thermal scattering law data file for 6 additional bound nuclides (H-1 in light water (H-H2O), H-1 in polyethylene (H-CH2), H-1 in zirconium hydride (H-ZrH) (not contained in VITAMIN-B6, VITJEF22.BOLIB and MATJEF22.BOLIB), H-2 in heavy water (H2-D2O), C in graphite (C-GPH) and Be in beryllium metal (Be-TH)). From MATJEFF31.BOLIB it is easily possible to generate, with the use of the TRANSX code, working libraries of collapsed and self-shielded cross sections in GOXS or FIDO-ANISN format for calculations with the DOORS /12/, DANTSYS /13/ and PARTISN /14/ deterministic transport systems and the MORSE /15/ Monte

  8. TALYS-Based Cross Section Library for Use with MCNPX.

    Energy Science and Technology Software Center (OSTI)

    2013-06-27

    Version 00 The TENDL-2012 library has been checked with the CHECKR, FIZCON and PSYCHE checking programs and successfully processed with NJOY-99.161 into ACE format to create this library for use in MCNP5 and MCNPX calculations. ACE files are provided for neutrons, protons, deuterons, tritons, helions and alpha particles.

  9. MCNPX Extension for Using Light Ion Evaluated Nuclear Data Library.

    Energy Science and Technology Software Center (OSTI)

    2013-05-23

    Version 00 US DOE 10CFR810 Jurisdiction. MCUNED is an MCNPX extension that handles a light ion evaluated nuclear data library. Using MCUNED, all MCNPX simulations involving transport of light ion could be solved using evaluated libraries instead of MCNPX built-in models.

  10. Building Energy Modeling Library - 2013 BTO Peer Review | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Modeling Library - 2013 BTO Peer Review Building Energy Modeling Library - 2013 BTO Peer Review Commercial Buildings Integration Project for the 2013 Building Technologies Office's Program Peer Review commlbldgs03_franconi_040213.pdf (793.6 KB) More Documents & Publications Technology Performance Exchange - 2013 BTO Peer Review Whole Building Performance-Based Procurement Training Autotune - 2013

  11. Kiwi: An Evaluated Library of Uncertainties in Nuclear Data and Package for Nuclear Sensitivity Studies

    SciTech Connect (OSTI)

    Pruet, J

    2007-06-23

    This report describes Kiwi, a program developed at Livermore to enable mature studies of the relation between imperfectly known nuclear physics and uncertainties in simulations of complicated systems. Kiwi includes a library of evaluated nuclear data uncertainties, tools for modifying data according to these uncertainties, and a simple interface for generating processed data used by transport codes. As well, Kiwi provides access to calculations of k eigenvalues for critical assemblies. This allows the user to check implications of data modifications against integral experiments for multiplying systems. Kiwi is written in python. The uncertainty library has the same format and directory structure as the native ENDL used at Livermore. Calculations for critical assemblies rely on deterministic and Monte Carlo codes developed by B division.

  12. Thermal performance of complex fenestration systems

    SciTech Connect (OSTI)

    Carpenter, S.C.; Elmahdy, A.H.

    1994-12-31

    The thermal performance (i.e., U-factor) of four complex fenestration systems is examined using computer simulation tools and guarded hot box testing. The systems include a flat glazed skylight, a domed or bubble skylight, a greenhouse window, and a curtain wall. The extra care required in performing simulation and testing of these complex products is described. There was good agreement (within 10%) between test and simulation for two of the four products. The agreement was slightly poorer (maximum difference of 16%) for the two high-heat-transfer products: the domed skylight and the greenhouse window. Possible causes for the larger discrepancy in these projecting window products are uncertainties in the inside and outside film coefficients and lower warm-side air temperatures because of stagnant airflow.

  13. TOXNET and Beyond: Using the National Library of Medicine's Environmental Health and Toxicology Portal

    SciTech Connect (OSTI)

    Templin-Branner, W.

    2010-10-20

    The National Library of Medicine's Environmental Health and Toxicology Portal provides access to numerous databases that can help you explore environmental chemicals and risks. TOXNET and Beyond: Using NLM's Environmental Health and Toxicology Portal conveys the fundamentals of searching the NLM's TOXNET system of databases in chemistry, toxicology, environmental health, and related fields. In addition to TOXNET, the course will highlight various resources available through the Environmental Health and Toxicology Portal.

  14. DOE - NNSA/NFO -- Photo Library Wild Flowers

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Wild Flowers NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office Photo Library - Wild Flowers Wild flowers such as Cane Spring suncup and White bearpoppy are included among the 750 varieties of plants located on the Nevada National Security Site. Instructions: Click the photograph THUMBNAIL to view the photograph details Thumbnail Category http://www.nv.doe.gov/library/photos/thumbs/CaneSpringsuncup.jpg Wild Flowers http://www.nv.doe.gov/library/photos/thumbs/Clokeys.jpg Wild Flowers

  15. Element Agglomeration Algebraic Multilevel Monte-Carlo Library

    Energy Science and Technology Software Center (OSTI)

    2015-02-19

    ElagMC is a parallel C++ library for Multilevel Monte Carlo simulations with algebraically constructed coarse spaces. ElagMC enables Multilevel variance reduction techniques in the context of general unstructured meshes by using the specialized element-based agglomeration techniques implemented in ELAG (the Element-Agglomeration Algebraic Multigrid and Upscaling Library developed by U. Villa and P. Vassilevski and currently under review for public release). The ElabMC library can support different type of deterministic problems, including mixed finite element discretizationsmore » of subsurface flow problems.« less

  16. Global-Address Space Networking (GASNet) Library

    Energy Science and Technology Software Center (OSTI)

    2011-04-06

    GASNet (Global-Address Space Networking) is a language-independent, low-level networking layer that provides network-independent, high-performance communication primitives tailored for implementing parallel global address space SPMD languages such as UPC and Titanium. The interface is primarily intended as a compilation target and for use by runtime library writers (as opposed to end users), and the primary goals are high performance, interface portability, and expressiveness. GASNet is designed specifically to support high-performance, portable implementations of global address spacemore » languages on modern high-end communication networks. The interface provides the flexibility and extensibility required to express a wide variety of communication patterns without sacrificing performance by imposing large computational overheads in the interface. The design of the GASNet interface is partitioned into two layers to maximize porting ease without sacrificing performance: the lower level is a narrow but very general interface called the GASNet core API - the design is basedheavily on Active Messages, and is implemented directly on top of each individual network architecture. The upper level is a wider and more expressive interface called GASNet extended API, which provides high-level operations such as remote memory access and various collective operations. This release implements GASNet over MPI, the Quadrics "elan" API, the Myrinet "GM" API and the "LAPI" interface to the IBM SP switch. A template is provided for adding support for additional network interfaces.« less

  17. FILTR: Flash Isotope Library and Training Resource

    SciTech Connect (OSTI)

    Campbell, D; Trombino, D

    2007-07-26

    The subject of radiation detection is replete with complex concepts and challenging nomenclature. Furthermore, a daunting variety of radioactive isotopes may be encountered during the routine operation of a radiation detector. Individuals tasked with searching for illicit sources of radiation must remain vigilant while navigating through more frequently encountered mundane and legitimate radioactive sources. The Flash Isotope Library and Training Resource (FILTR) is being developed as an easily accessible and intuitive reference tool to manage the high volume of complex information required for this task. FILTR is an extended version of the Primary Utility for Nuclear Terminology (PUNT) software developed by the Counter Measures Test Beds group at Lawrence Livermore National Laboratory for the United States Secret Service. Authored in the Flash multimedia development environment, FILTR contains detailed information on potentially encountered isotopes as well as training on radiation and operational procedures. Reference material is organized to present critical information quickly while facilitating more in-depth investigation through an intuitive interface and engaging content. FILTR is being developed for a diverse audience of law enforcement organizations and government agencies and a wide range of skill sets from expert analysts to officers whose primary role is not radiation detection. Additionally, the wide compatibility of Flash content will allow FILTR to be readily accessible through the growing number of multi-media enabled electronic devices, including PDAs and cellular phones.

  18. T-609: Adobe Acrobat/Reader Memory Corruption Error in CoolType Library Lets Remote Users Execute Arbitrary Code

    Broader source: Energy.gov [DOE]

    A remote user can create a specially crafted PDF file that, when loaded by the target user, will trigger a memory corruption error in the CoolType library and execute arbitrary code on the target system. The code will run with the privileges of the target user.

  19. 16 USC 797c - Dams in National Park System Units | Open Energy...

    Open Energy Info (EERE)

    16 USC 797c - Dams in National Park System Units Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: 16 USC 797c - Dams in National...

  20. 31 TAC 15.3 - Management of the Beach/Dune System Administration...

    Open Energy Info (EERE)

    TAC 15.3 - Management of the BeachDune System Administration Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- RegulationRegulation: 31 TAC 15.3 -...

  1. AAC R-18-8-260 Hazardous Waste Management System | Open Energy...

    Open Energy Info (EERE)

    AAC R-18-8-260 Hazardous Waste Management System Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- RegulationRegulation: AAC R-18-8-260 Hazardous...

  2. NAC 444.731 - Class III Solid Waste Management Systems | Open...

    Open Energy Info (EERE)

    .731 - Class III Solid Waste Management Systems Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- RegulationRegulation: NAC 444.731 - Class III...

  3. IDAPA 58.01.07 - Rules Regulating Underground Storage Tank Systems...

    Open Energy Info (EERE)

    7 - Rules Regulating Underground Storage Tank Systems Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: IDAPA 58.01.07 - Rules...

  4. H.A.R. 11-62 - Wastewater Systems | Open Energy Information

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Legal Document- RegulationRegulation: H.A.R. 11-62 - Wastewater SystemsLegal Abstract The Department of Health regulates wastewater...

  5. ARM 17-30-10 - Ground Water Pollution Control System | Open Energy...

    Open Energy Info (EERE)

    - Ground Water Pollution Control System Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- RegulationRegulation: ARM 17-30-10 - Ground Water...

  6. Rock-Water Interactions In Hot Dry Rock Geothermal Systems- Field...

    Open Energy Info (EERE)

    Rock-Water Interactions In Hot Dry Rock Geothermal Systems- Field Investigations Of In Situ Geochemical Behavior Jump to: navigation, search OpenEI Reference LibraryAdd to library...

  7. A New Gold Pan For The West- Discovering Blind Geothermal Systems...

    Open Energy Info (EERE)

    Gold Pan For The West- Discovering Blind Geothermal Systems With Shallow Temperature Surveys Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: A...

  8. APS Tcl/Tk library and interpreter extensions

    SciTech Connect (OSTI)

    Saunders, C.; Borland, M.

    1995-11-27

    This document serves as a User`s Manual and Reference for the library of Tcl and Tk procedures produced by the Operations Analysis Group. Also covered are compiled interpreter extensions.

  9. Extended Version of the WIMS 69-group Library.

    Energy Science and Technology Software Center (OSTI)

    1990-12-17

    Version 01 The WIMSLIB-IJSO data library can be used for PWR calculations. The materials - Ag, In, Cd - were added to the original data for PWR control rods.

  10. DiffPy-CMI-Python libraries for Complex Modeling Initiative

    Energy Science and Technology Software Center (OSTI)

    2014-02-01

    Software to manipulate and describe crystal and molecular structures and set up structural refinements from multiple experimental inputs. Calculation and simulation of structure derived physical quantities. Library for creating customized refinements of atomic structures from available experimental and theoretical inputs.

  11. Introducing The National Library of Energy (Beta), New Search...

    Office of Scientific and Technical Information (OSTI)

    Introducing The National Library of EnergyBeta, New Search Engine Facilitating Access to ... and developer tool" on the recently published new DOE resource hub for open energy data. ...

  12. DOE - NNSA/NFO -- Photo Library EM Waste Management

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    U.S. DOENNSA - Nevada Field Office Photo Library - Waste Management Foreseeing the need for environmental management at the Nevada Test Site, the U.S. Department of Energy Nevada ...

  13. DOE - NNSA/NFO -- Photo Library Big Hole Drilling

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Big Hole Drilling NNSANFO Language Options U.S. DOENNSA - Nevada Field Office Photo Library - Big Hole Drilling The need to drill large-diameter holes at the Nevada National ...

  14. DOE - NNSA/NFO -- Photo Library Exhibits and Displays

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Exhibits and Displays NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office Photo Library - Exhibits and Displays Educational exhibits and displays are available for loan to libraries, schools and for conferences and other special events. To request an exhibit or display, please fill out and submit the Exhibits and Display Request Form. Instructions: Click the photograph THUMBNAIL to view the photograph details Thumbnail Title ER-Banner-Stand17 Groundwater Poster Groundwater Poster Kids

  15. Low-Temperature Geothermal Photo Library | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Low-Temperature Geothermal Photo Library Low-Temperature Geothermal Photo Library Addthis America&#039;s First Geothermally Heated Campus adds 3.5 MW of Clean, Domestic Electricity Generation 1 of 2 America's First Geothermally Heated Campus adds 3.5 MW of Clean, Domestic Electricity Generation With Energy Department support, the Klamath Falls campus will utilize 1.5 megawatts (MW) of newly installed geothermal capacity combined with a 2 MW solar array, making OIT the first university in

  16. Los Alamos research published in Public Library of Science

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Los Alamos research published in Public Library of Science Alumni Link: Opportunities, News and Resources for Former Employees Latest Issue:September 2015 all issues All Issues » submit Los Alamos research published in Public Library of Science Scientists can now monitor and forecast diseases around the globe more effectively by analyzing views of Wikipedia articles January 1, 2015 Wikipedia searches for disease symptoms can help forecast outbreaks around the world Wikipedia searches can help

  17. Small, Fast S-Expression Library, Version 1.0

    Energy Science and Technology Software Center (OSTI)

    2004-12-02

    This software is a library for C and C++ programmers to use for fast and efficient parsing and processing of symbolic expressions, or s-expressions. An s-expression is a text-representation of a tree data structure, and is the basis for the syntax of the LISP and Scheme programming languages. Multiple similar libraries exist, but this one was designed from the ground up for speed, efficiency, and simplicity.

  18. System and method for memory allocation in a multiclass memory system

    DOE Patents [OSTI]

    Loh, Gabriel; Meswani, Mitesh; Ignatowski, Michael; Nutter, Mark

    2016-06-28

    A system for memory allocation in a multiclass memory system includes a processor coupleable to a plurality of memories sharing a unified memory address space, and a library store to store a library of software functions. The processor identifies a type of a data structure in response to a memory allocation function call to the library for allocating memory to the data structure. Using the library, the processor allocates portions of the data structure among multiple memories of the multiclass memory system based on the type of the data structure.

  19. Development and testing of the VITAMIN-B7/BUGLE-B7 coupled neutron-gamma multigroup cross-section libraries

    SciTech Connect (OSTI)

    Risner, J.M.; Wiarda, D.; Miller, T.M.; Peplow, D.E.; Patton, B.W.; Dunn, M.E.; Parks, B.T.

    2011-07-01

    The U.S. Nuclear Regulatory Commission's Regulatory Guide 1.190 states that calculational methods used to estimate reactor pressure vessel (RPV) fluence should use the latest version of the evaluated nuclear data file (ENDF). The VITAMIN-B6 fine-group library and BUGLE-96 broad-group library, which are widely used for RPV fluence calculations, were generated using ENDF/B-VI.3 data, which was the most current data when Regulatory Guide 1.190 was issued. We have developed new fine-group (VITAMIN-B7) and broad-group (BUGLE-B7) libraries based on ENDF/B-VII.0. These new libraries, which were processed using the AMPX code system, maintain the same group structures as the VITAMIN-B6 and BUGLE-96 libraries. Verification and validation of the new libraries were accomplished using diagnostic checks in AMPX, 'unit tests' for each element in VITAMIN-B7, and a diverse set of benchmark experiments including critical evaluations for fast and thermal systems, a set of experimental benchmarks that are used for SCALE regression tests, and three RPV fluence benchmarks. The benchmark evaluation results demonstrate that VITAMIN-B7 and BUGLE-B7 are appropriate for use in RPV fluence calculations and meet the calculational uncertainty criterion in Regulatory Guide 1.190. (authors)

  20. Library of Congress Catalogingin-Publication Data

    Office of Scientific and Technical Information (OSTI)

    ... and Applied Physics United Nations Educational, Scientific and Cultural Organization ... Medical Systems, Incorporated Radiation Research Society Scanditronix AB Siemens ...

  1. Neutron cross-section libraries in the AMPX master interface format for thermal and fast reactors

    SciTech Connect (OSTI)

    Bjerke, M.A.; Webster, C.C.

    1981-12-01

    Neutron cross-section libraries in the AMPX master interface format have been created for three reactor types. Included are an 84-group library for use with light-water reactors, a 27-group library for use with heavy-water CANDU reactors and a 126-group library for use with liquid metal fast breeder reactors. In general, ENDF/B data were used in the creation of these libraries, and the nuclides included in each library should be sufficient for most neutronic analyses of reactors of that type. Each library has been used successfully in fuel depletion calculations.

  2. B&W Y-12 supports local libraries | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    supports local ... B&W Y-12 supports local libraries Posted: November 7, 2013 - 3:42pm Libraries in four local towns are benefitting from $1,250 donations from B&W Y-12. The Clinton Public Library, the Briceville Public Library, the Wartburg Public Library and the Betty Anne Jolly Norris Area Community Library received the corporate donations during the past few months. "Your unrestricted gift allows the Friends Group to assist the Norris Community Library in their work for the good

  3. NA-42 TI Shared Software Component Library FY2011 Final Report

    SciTech Connect (OSTI)

    Knudson, Christa K.; Rutz, Frederick C.; Dorow, Kevin E.

    2011-07-21

    The NA-42 TI program initiated an effort in FY2010 to standardize its software development efforts with the long term goal of migrating toward a software management approach that will allow for the sharing and reuse of code developed within the TI program, improve integration, ensure a level of software documentation, and reduce development costs. The Pacific Northwest National Laboratory (PNNL) has been tasked with two activities that support this mission. PNNL has been tasked with the identification, selection, and implementation of a Shared Software Component Library. The intent of the library is to provide a common repository that is accessible by all authorized NA-42 software development teams. The repository facilitates software reuse through a searchable and easy to use web based interface. As software is submitted to the repository, the component registration process captures meta-data and provides version control for compiled libraries, documentation, and source code. This meta-data is then available for retrieval and review as part of library search results. In FY2010, PNNL and staff from the Remote Sensing Laboratory (RSL) teamed up to develop a software application with the goal of replacing the aging Aerial Measuring System (AMS). The application under development includes an Advanced Visualization and Integration of Data (AVID) framework and associated AMS modules. Throughout development, PNNL and RSL have utilized a common AMS code repository for collaborative code development. The AMS repository is hosted by PNNL, is restricted to the project development team, is accessed via two different geographic locations and continues to be used. The knowledge gained from the collaboration and hosting of this repository in conjunction with PNNL software development and systems engineering capabilities were used in the selection of a package to be used in the implementation of the software component library on behalf of NA-42 TI. The second task managed by PNNL

  4. MICROX-2 cross section library based on ENDF/B-VII

    SciTech Connect (OSTI)

    Hou, J.; Ivanov, K.; Choi, H.

    2012-07-01

    New cross section libraries of a neutron transport code MICROX-2 have been generated for advanced reactor design and fuel cycle analyses. A total of 386 nuclides were processed, including 10 thermal scattering nuclides, which are available in ENDF/B-VII release 0 nuclear data. The NJOY system and MICROR code were used to process nuclear data and convert them into MICROX-2 format. The energy group structure of the new library was optimized for both the thermal and fast neutron spectrum reactors based on Contributon and Point-wise Cross Section Driven (CPXSD) method, resulting in a total of 1173 energy groups. A series of lattice cell level benchmark calculations have been performed against both experimental measurements and Monte Carlo calculations for the effective/infinite multiplication factor and reaction rate ratios. The results of MICROX-2 calculation with the new library were consistent with those of 15 reference cases. The average errors of the infinite multiplication factor and reaction rate ratio were 0.31% {delta}k and 1.9%, respectively. The maximum error of reaction rate ratio was 8% for {sup 238}U-to-{sup 235}U fission of ZEBRA lattice against the reference calculation done by MCNP5. (authors)

  5. GBL-2D Version 1.0: a 2D geometry boolean library.

    SciTech Connect (OSTI)

    McBride, Cory L. (Elemental Technologies, American Fort, UT); Schmidt, Rodney Cannon; Yarberry, Victor R.; Meyers, Ray J. (Elemental Technologies, American Fort, UT)

    2006-11-01

    This report describes version 1.0 of GBL-2D, a geometric Boolean library for 2D objects. The library is written in C++ and consists of a set of classes and routines. The classes primarily represent geometric data and relationships. Classes are provided for 2D points, lines, arcs, edge uses, loops, surfaces and mask sets. The routines contain algorithms for geometric Boolean operations and utility functions. Routines are provided that incorporate the Boolean operations: Union(OR), XOR, Intersection and Difference. A variety of additional analytical geometry routines and routines for importing and exporting the data in various file formats are also provided. The GBL-2D library was originally developed as a geometric modeling engine for use with a separate software tool, called SummitView [1], that manipulates the 2D mask sets created by designers of Micro-Electro-Mechanical Systems (MEMS). However, many other practical applications for this type of software can be envisioned because the need to perform 2D Boolean operations can arise in many contexts.

  6. File Systems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    File Systems File Systems For a general description of the different file systems available on PDSF please see Eliza File Systems and Other File Systems. Below is a summary of how STAR uses the various systems: /common The STAR software is installed on /common. For 32sl44 it is under /common/star/star44 and for sl53 it is under /common/star/star53. In both cases the software consists primarily of a STAR-specific ROOT installation on which releases of the STAR libraries are built as shown on the

  7. Biomass Scenario Model Scenario Library: Definitions, Construction...

    Office of Scientific and Technical Information (OSTI)

    S. 09 BIOMASS FUELS; 59 BASIC BIOLOGICAL SCIENCES; 29 ENERGY PLANNING, POLICY AND ECONOMY BIOMASS; BIOFUEL; BSM; SYSTEM DYNAMICS; BIOFUEL INCENTIVES; SCENARIOS; Bioenergy;...

  8. EGS Data Library | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Sheets EGS Fact Sheet EGS Infographic FORGE Informational Flier Reports A Technology Roadmap for Strategic Development of Enhanced Geothermal Systems Geothermal Energy...

  9. Transmission/Resource Library | Open Energy Information

    Open Energy Info (EERE)

    electric transmission systems, including in-depth discussion direct current, below-ground, and high-temperature superconductor lines. Includes sections on design features as...

  10. Updates to the ORIGEN-S Cross-Section Libraries Using ENDF-VI, EAF-99, and FENDL-2.0

    SciTech Connect (OSTI)

    Murphy, B.D.

    2004-11-04

    The standard cross-section library for light-water reactor (LWR) analyses used by the ORIGEN-S depletion and decay code has been extensively updated. This work entailed the development of broad multigroup neutron cross sections for ORIGEN-S from several sources of pointwise continuous-energy cross-section evaluations, including the U.S. Evaluated Nuclear Data Files ENDF/B-VI Release 7, the Fusion Evaluated Nuclear Data Library FENDL-2.0, and the European Activation File EAF-99. The pointwise cross sections were collapsed to a three-group structure using a continuous-energy neutron flux spectrum representative of the typical neutronic conditions of typical LWR fuel and formatted for use by ORIGEN-S. In addition, the fission-product library has been expanded to include ENDF/B-VI fission yield data for 30 fissionable actinides. The processing codes and procedures are explained. Preliminary verification studies using the updated libraries were performed using the modules of the SCALE (Standardized Computer Analyses for Licensing Evaluation) system. Comparisons between the previous basic ORIGEN-S libraries and the updated libraries developed in this work are presented.

  11. Procedure for normalization of cDNA libraries

    DOE Patents [OSTI]

    Bonaldo, Maria DeFatima; Soares, Marcelo Bento

    1997-01-01

    This invention provides a method to normalize a cDNA library constructed in a vector capable of being converted to single-stranded circles and capable of producing complementary nucleic acid molecules to the single-stranded circles comprising: (a) converting the cDNA library in single-stranded circles; (b) generating complementary nucleic acid molecules to the single-stranded circles; (c) hybridizing the single-stranded circles converted in step (a) with complementary nucleic acid molecules of step (b) to produce partial duplexes to an appropriate Cot; (e) separating the unhybridized single-stranded circles from the hybridized single-stranded circles, thereby generating a normalized cDNA library.

  12. Tensor Algebra Library for NVidia Graphics Processing Units

    Energy Science and Technology Software Center (OSTI)

    2015-03-16

    This is a general purpose math library implementing basic tensor algebra operations on NVidia GPU accelerators. This software is a tensor algebra library that can perform basic tensor algebra operations, including tensor contractions, tensor products, tensor additions, etc., on NVidia GPU accelerators, asynchronously with respect to the CPU host. It supports a simultaneous use of multiple NVidia GPUs. Each asynchronous API function returns a handle which can later be used for querying the completion ofmore » the corresponding tensor algebra operation on a specific GPU. The tensors participating in a particular tensor operation are assumed to be stored in local RAM of a node or GPU RAM. The main research area where this library can be utilized is the quantum many-body theory (e.g., in electronic structure theory).« less

  13. Accurate Development of Thermal Neutron Scattering Cross Section Libraries

    SciTech Connect (OSTI)

    Hawari, Ayman; Dunn, Michael

    2014-06-10

    The objective of this project is to develop a holistic (fundamental and accurate) approach for generating thermal neutron scattering cross section libraries for a collection of important enutron moderators and reflectors. The primary components of this approach are the physcial accuracy and completeness of the generated data libraries. Consequently, for the first time, thermal neutron scattering cross section data libraries will be generated that are based on accurate theoretical models, that are carefully benchmarked against experimental and computational data, and that contain complete covariance information that can be used in propagating the data uncertainties through the various components of the nuclear design and execution process. To achieve this objective, computational and experimental investigations will be performed on a carefully selected subset of materials that play a key role in all stages of the nuclear fuel cycle.

  14. Library Resources for Bac End Sequencing. Final Technical Report

    SciTech Connect (OSTI)

    Pieter J. de Jong

    2000-10-01

    Studies directed towards the specific aims outlined for this research award are summarized. The RPCI II Human Bac Library has been expanded by the addition of 6.9-fold genomic coverage. This segment has been generated from a MBOI partial digest of the same anonymous donor DNA used for the rest of the library. A new cloning vector, pTARBAC1, has been constructed and used in the construction of RPCI-II segment 5. This new cloning vector provides a new strategy in identifying targeted genomic regions and will greatly facilitate a large-scale analysis for positional cloning. A new maleCS7BC/6J mouse BAC library has been constructed. RPCI-23 contain 576 plates (approx 210,000 clones) and represents approximately 11-fold coverage of the mouse genome.

  15. Tensor Algebra Library for NVidia Graphics Processing Units

    SciTech Connect (OSTI)

    Liakh, Dmitry

    2015-03-16

    This is a general purpose math library implementing basic tensor algebra operations on NVidia GPU accelerators. This software is a tensor algebra library that can perform basic tensor algebra operations, including tensor contractions, tensor products, tensor additions, etc., on NVidia GPU accelerators, asynchronously with respect to the CPU host. It supports a simultaneous use of multiple NVidia GPUs. Each asynchronous API function returns a handle which can later be used for querying the completion of the corresponding tensor algebra operation on a specific GPU. The tensors participating in a particular tensor operation are assumed to be stored in local RAM of a node or GPU RAM. The main research area where this library can be utilized is the quantum many-body theory (e.g., in electronic structure theory).

  16. Procedure for normalization of cDNA libraries

    DOE Patents [OSTI]

    Bonaldo, M.D.; Soares, M.B.

    1997-12-30

    This invention provides a method to normalize a cDNA library constructed in a vector capable of being converted to single-stranded circles and capable of producing complementary nucleic acid molecules to the single-stranded circles comprising: (a) converting the cDNA library in single-stranded circles; (b) generating complementary nucleic acid molecules to the single-stranded circles; (c) hybridizing the single-stranded circles converted in step (a) with complementary nucleic acid molecules of step (b) to produce partial duplexes to an appropriate Cot; (e) separating the unhybridized single-stranded circles from the hybridized single-stranded circles, thereby generating a normalized cDNA library. 1 fig.

  17. Hydrothermal Photo Library | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    To extend the available heat extraction per well, the Office partnered with FORO Energy to design a high-power laser system with the potential to decrease hard-rock drilling costs. ...

  18. The SCALE Verified, Archived Library of Inputs and Data - VALID

    SciTech Connect (OSTI)

    Marshall, William BJ J; Rearden, Bradley T

    2013-01-01

    The Verified, Archived Library of Inputs and Data (VALID) at ORNL contains high quality, independently reviewed models and results that improve confidence in analysis. VALID is developed and maintained according to a procedure of the SCALE quality assurance (QA) plan. This paper reviews the origins of the procedure and its intended purpose, the philosophy of the procedure, some highlights of its implementation, and the future of the procedure and associated VALID library. The original focus of the procedure was the generation of high-quality models that could be archived at ORNL and applied to many studies. The review process associated with model generation minimized the chances of errors in these archived models. Subsequently, the scope of the library and procedure was expanded to provide high quality, reviewed sensitivity data files for deployment through the International Handbook of Evaluated Criticality Safety Benchmark Experiments (IHECSBE). Sensitivity data files for approximately 400 such models are currently available. The VALID procedure and library continue fulfilling these multiple roles. The VALID procedure is based on the quality assurance principles of ISO 9001 and nuclear safety analysis. Some of these key concepts include: independent generation and review of information, generation and review by qualified individuals, use of appropriate references for design data and documentation, and retrievability of the models, results, and documentation associated with entries in the library. Some highlights of the detailed procedure are discussed to provide background on its implementation and to indicate limitations of data extracted from VALID for use by the broader community. Specifically, external users of data generated within VALID must take responsibility for ensuring that the files are used within the QA framework of their organization and that use is appropriate. The future plans for the VALID library include expansion to include additional

  19. A Geometric Boolean Library for 2D Objects

    Energy Science and Technology Software Center (OSTI)

    2006-01-05

    The 2D Boolean Library is a collection of C++ classes -- which primarily represent 2D geometric data and relationships, and routines -- which contain algorithms for 2D geometric Boolean operations and utility functions. Classes are provided for 2D points, lines, arcs, edgeuses, loops, surfaces and mask sets. Routines are provided that incorporate the Boolean operations Union(OR), XOR, Intersection and Difference. Various analytical geometry routines and routines for importing and exporting the data in various filemore » formats, are also provided in the library.« less

  20. Damsel: A Data Model Storage Library for Exascale Science

    SciTech Connect (OSTI)

    Koziol, Quincey

    2014-11-26

    The goal of this project is to enable exascale computational science applications to interact conveniently and efficiently with storage through abstractions that match their data models. We will accomplish this through three major activities: (1) identifying major data model motifs in computational science applications and developing representative benchmarks; (2) developing a data model storage library, called Damsel, that supports these motifs, provides efficient storage data layouts, incorporates optimizations to enable exascale operation, and is tolerant to failures; and (3) productizing Damsel and working with computational scientists to encourage adoption of this library by the scientific community.

  1. Damsel - A Data Model Storage Library for Exascale Science

    SciTech Connect (OSTI)

    Samatova, Nagiza F

    2014-07-18

    The goal of this project is to enable exascale computational science applications to interact conveniently and efficiently with storage through abstractions that match their data models. We will accomplish this through three major activities: (1) identifying major data model motifs in computational science applications and developing representative benchmarks; (2) developing a data model storage library, called Damsel, that supports these motifs, provides efficient storage data layouts, incorporates optimizations to enable exascale operation, and is tolerant to failures; and (3) productizing Damsel and working with computational scientists to encourage adoption of this library by the scientific community.

  2. Outreach to Scientists and Engineers at the Hanford Technical Library

    SciTech Connect (OSTI)

    Buxton, Karen A.

    2008-06-17

    Staff at the Hanford Technical Library has developed a suite of programs designed to help busy researchers at the Pacific Northwest National Laboratory (PNNL) make better use of library products and services. Programs include formal training classes, one-on-one consultations, and targeted email messages announcing new materials to researchers in specific fields. A staple of outreach has been to teach classes to library clients covering research tools in their fields. These classes started out in the library classroom and then expanded to other venues around PNNL. Class surveys indicated that many researchers desired a practical approach to learning rather than the traditional lecture format. The library instituted Library Learning Day and hosted classes in the PNNL computer training room to provide lab employees with a hands-on learning experience. Classes are generally offered at noon and lab staff attends classes on their lunch hour. Many just do not have time to spend a full hour in training. Library staff added some experimental half-hour mini classes in campus buildings geared to the projects and interests of researchers there to see if this format was more appealing. As other programs have developed librarians are teaching fewer classes but average attendance figures has remained fairly stable from 2005-2007. In summer of 2004 the library began the Traveling Librarian program. Librarians call-on groups and individuals in 24 buildings on the Richland Washington campus. Five full-time and two part-time librarians are involved in the program. Librarians usually send out email announcements prior to visits and encourage scientists and engineers to make appointments for a brief 15 minute consultation in the researchers own office. During the meeting lab staff learn about products or product features that can help them work more productively. Librarians also make cold calls to staff that do not request a consultation and may not be making full use of the library

  3. Assessment of Unglazed Solar Domestic Water Heaters

    SciTech Connect (OSTI)

    Burch, J.; Salasovich, J.; Hillman, T.

    2005-12-01

    Conference paper investigating cost-performance tradeoffs in replacing glazed collectors with unglazed collectors in solar domestic water heating systems.

  4. Sandia Text ANaLysis Extensible librarY Server

    Energy Science and Technology Software Center (OSTI)

    2006-05-11

    This is a server wrapper for STANLEY (Sandia Text ANaLysis Extensible librarY). STANLEY provides capabilities for analyzing, indexing and searching through text. STANLEY Server exposes this capability through a TCP/IP interface allowing third party applications and remote clients to access it.

  5. THE INFRARED TELESCOPE FACILITY (IRTF) SPECTRAL LIBRARY: COOL STARS

    SciTech Connect (OSTI)

    Rayner, John T.; Cushing, Michael C.; Vacca, William D. E-mail: michael.cushing@gmail.com

    2009-12-01

    We present a 0.8-5 {mu}m spectral library of 210 cool stars observed at a resolving power of R {identical_to} {lambda}/{delta}{lambda} {approx} 2000 with the medium-resolution infrared spectrograph, SpeX, at the 3.0 m NASA Infrared Telescope Facility (IRTF) on Mauna Kea, Hawaii. The stars have well-established MK spectral classifications and are mostly restricted to near-solar metallicities. The sample not only contains the F, G, K, and M spectral types with luminosity classes between I and V, but also includes some AGB, carbon, and S stars. In contrast to some other spectral libraries, the continuum shape of the spectra is measured and preserved in the data reduction process. The spectra are absolutely flux calibrated using the Two Micron All Sky Survey photometry. Potential uses of the library include studying the physics of cool stars, classifying and studying embedded young clusters and optically obscured regions of the Galaxy, evolutionary population synthesis to study unresolved stellar populations in optically obscured regions of galaxies and synthetic photometry. The library is available in digital form from the IRTF Web site.

  6. UPC Language and Library Specifications, Version 1.3

    SciTech Connect (OSTI)

    UPC Consortium; Bonachea, Dan; Funck, Gary

    2013-11-16

    UPC is an explicitly parallel extension to the ISO C 99 Standard. UPC follows the partitioned global address space programming model. This document is the formal specification for the UPC language and library syntax and semantics, and supersedes prior specification version 1.2 (LBNL-59208).

  7. Modular Finite Element Methods Library Version: 1.0

    Energy Science and Technology Software Center (OSTI)

    2010-06-22

    MFEM is a general, modular library for finite element methods. It provides a variety of finite element spaces and bilinear/linear forms in 2D and 3D. MFEM also includes classes for dealing with various types of meshes and their refinement.

  8. The Datatype Compare Library v.1.0

    Energy Science and Technology Software Center (OSTI)

    2012-01-20

    The Datatype Compare (DTCMP) library provides routines that sort, search, merge, partition, rank, and select items using operations that compare MPI datatypes. Such routines are needed im MPI applications dealing with large distributed latasets, where the amount of data is too large to gather to a single process.

  9. High throughput screening using acoustic droplet ejection to combine protein crystals and chemical libraries on crystallization plates at high density

    SciTech Connect (OSTI)

    Teplitsky, Ella; Joshi, Karan; Ericson, Daniel L.; Scalia, Alexander; Mullen, Jeffrey D.; Sweet, Robert M.; Soares, Alexei S.

    2015-07-01

    We describe a high throughput method for screening up to 1728 distinct chemicals with protein crystals on a single microplate. Acoustic droplet ejection (ADE) was used to co-position 2.5 nL of protein, precipitant, and chemicals on a MiTeGen in situ-1 crystallization plate™ for screening by co-crystallization or soaking. ADE-transferred droplets follow a precise trajectory which allows all components to be transferred through small apertures in the microplate lid. The apertures were large enough for 2.5 nL droplets to pass through them, but small enough so that they did not disrupt the internal environment created by the mother liquor. Using this system, thermolysin and trypsin crystals were efficiently screened for binding to a heavy-metal mini-library. Fluorescence and X-ray diffraction were used to confirm that each chemical in the heavy-metal library was correctly paired with the intended protein crystal. Moreover, a fragment mini-library was screened to observe two known lysozyme We describe a high throughput method for screening up to 1728 distinct chemicals with protein crystals on a single microplate. Acoustic droplet ejection (ADE) was used to co-position 2.5 nL of protein, precipitant, and chemicals on a MiTeGen in situ-1 crystallization plate™ for screening by co-crystallization or soaking. ADE-transferred droplets follow a precise trajectory which allows all components to be transferred through small apertures in the microplate lid. The apertures were large enough for 2.5 nL droplets to pass through them, but small enough so that they did not disrupt the internal environment created by the mother liquor. Using this system, thermolysin and trypsin crystals were efficiently screened for binding to a heavy-metal mini-library. Fluorescence and X-ray diffraction were used to confirm that each chemical in the heavy-metal library was correctly paired with the intended protein crystal. A fragment mini-library was screened to observe two known lysozyme

  10. High throughput screening using acoustic droplet ejection to combine protein crystals and chemical libraries on crystallization plates at high density

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Teplitsky, Ella; Joshi, Karan; Ericson, Daniel L.; Scalia, Alexander; Mullen, Jeffrey D.; Sweet, Robert M.; Soares, Alexei S.

    2015-07-01

    We describe a high throughput method for screening up to 1728 distinct chemicals with protein crystals on a single microplate. Acoustic droplet ejection (ADE) was used to co-position 2.5 nL of protein, precipitant, and chemicals on a MiTeGen in situ-1 crystallization plate™ for screening by co-crystallization or soaking. ADE-transferred droplets follow a precise trajectory which allows all components to be transferred through small apertures in the microplate lid. The apertures were large enough for 2.5 nL droplets to pass through them, but small enough so that they did not disrupt the internal environment created by the mother liquor. Using thismore » system, thermolysin and trypsin crystals were efficiently screened for binding to a heavy-metal mini-library. Fluorescence and X-ray diffraction were used to confirm that each chemical in the heavy-metal library was correctly paired with the intended protein crystal. Moreover, a fragment mini-library was screened to observe two known lysozyme We describe a high throughput method for screening up to 1728 distinct chemicals with protein crystals on a single microplate. Acoustic droplet ejection (ADE) was used to co-position 2.5 nL of protein, precipitant, and chemicals on a MiTeGen in situ-1 crystallization plate™ for screening by co-crystallization or soaking. ADE-transferred droplets follow a precise trajectory which allows all components to be transferred through small apertures in the microplate lid. The apertures were large enough for 2.5 nL droplets to pass through them, but small enough so that they did not disrupt the internal environment created by the mother liquor. Using this system, thermolysin and trypsin crystals were efficiently screened for binding to a heavy-metal mini-library. Fluorescence and X-ray diffraction were used to confirm that each chemical in the heavy-metal library was correctly paired with the intended protein crystal. A fragment mini-library was screened to observe two known

  11. Damsel: A Data Model Storage Library for Exascale Science

    SciTech Connect (OSTI)

    Choudhary, Alok; Liao, Wei-keng

    2014-07-11

    Computational science applications have been described as having one of seven motifs (the “seven dwarfs”), each having a particular pattern of computation and communication. From a storage and I/O perspective, these applications can also be grouped into a number of data model motifs describing the way data is organized and accessed during simulation, analysis, and visualization. Major storage data models developed in the 1990s, such as Network Common Data Format (netCDF) and Hierarchical Data Format (HDF) projects, created support for more complex data models. Development of both netCDF and HDF5 was influenced by multi-dimensional dataset storage requirements, but their access models and formats were designed with sequential storage in mind (e.g., a POSIX I/O model). Although these and other high-level I/O libraries have had a beneficial impact on large parallel applications, they do not always attain a high percentage of peak I/O performance due to fundamental design limitations, and they do not address the full range of current and future computational science data models. The goal of this project is to enable exascale computational science applications to interact conveniently and efficiently with storage through abstractions that match their data models. The project consists of three major activities: (1) identifying major data model motifs in computational science applications and developing representative benchmarks; (2) developing a data model storage library, called Damsel, that supports these motifs, provides efficient storage data layouts, incorporates optimizations to enable exascale operation, and is tolerant to failures; and (3) productizing Damsel and working with computational scientists to encourage adoption of this library by the scientific community. The product of this project, Damsel library, is openly available for download from http://cucis.ece.northwestern.edu/projects/DAMSEL. Several case studies and application programming interface

  12. STANLEY (Sandia Text ANaLysis Extensible librarY) Ver. 1.1

    Energy Science and Technology Software Center (OSTI)

    2009-11-10

    Reusable, extensible text analysis library. This library forms the basis for the automated generation of cognitive models from text for Sandia's Cognition program. It also is the basis for the suite of underlying, related applications.

  13. StrBioLib: a Java library for development of custom computationalstruc...

    Office of Scientific and Technical Information (OSTI)

    StrBioLib: a Java library for development of custom computationalstructural biology applications Citation Details In-Document Search Title: StrBioLib: a Java library for ...

  14. OSTIblog Articles in the Computers in Libraries Topic | OSTI, US Dept of

    Office of Scientific and Technical Information (OSTI)

    Energy Office of Scientific and Technical Information Computers in Libraries Topic Dr. Warnick Speaks at Computers In Libraries Annual Conference by Sol Lederman 03 Apr, 2009 in Personal Perspectives 1527 DrWarnick.gif Dr. Warnick Speaks at Computers In Libraries Annual Conference Read more about 1527 Dr. Walt Warnick, Director of OSTI, recently had the honor of speaking at two events at the Computers In Libraries Conference. I asked Dr. Warnick to share some of his experience and

  15. Photo Library of the Nevada Site Office (Includes historical archive of nuclear testing images)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    See also the Historical Film Library at http://www.nv.doe.gov/library/films/testfilms.aspx and the Current Film Library at http://www.nv.doe.gov/library/films/current.aspx. Current films can be viewed online, but only short clips of the historical films are viewable. They can be ordered via an online request form for a very small shipping and handling fee.

  16. Solar-energy workshops held at Miami-Dade Public Libraries, 1981-1982. Final report

    SciTech Connect (OSTI)

    1982-01-01

    Over a two year period, the Miami-Dade Public Library System gave 12 free solar energy programs throughout Dade County in its various branches; Solar Water Heater Workshops, where registered participants actually took part in building or putting together a solar water heater. Kick-off programs were also given free-of-charge by a number of local solar companies, to inform the audience about solar energy in general and the solar workshops in particular. Average registered attendance at these workshops was twenty, not including the crowds of onlookers at the outdoor building sessions or the earlier kick-off programs, which often had an audience of sixty or more. A later phone check of ten workshop participants picket at random revealed four who had built or were building their own solar systems, three who were considering the purchase of -or had already bought - a domestic solar water heater, one who was reported to be no longer interested by his son, and two who could not be reached. One of the completed heaters has been donated to a local Girl Scout troop, where it is on permanent exhibit; another will be placed in a new library branch, with appropriate publicity about its source. Florida Power and Light, which formerly viewed our early workshops with suspicion, sent a speaker to our final program to announce financial assistance to those who wanted to buy a solar hot water heater.

  17. Parasail: SIMD C library for global, semi-global, and local pairwise sequence alignments

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Daily, Jeffrey A.

    2016-02-10

    Sequence alignment algorithms are a key component of many bioinformatics applications. Though various fast Smith-Waterman local sequence alignment implementations have been developed for x86 CPUs, most are embedded into larger database search tools. In addition, fast implementations of Needleman-Wunsch global sequence alignment and its semi-global variants are not as widespread. This article presents the first software library for local, global, and semi-global pairwise intra-sequence alignments and improves the performance of previous intra-sequence implementations. As a result, a faster intra-sequence pairwise alignment implementation is described and benchmarked. Using a 375 residue query sequence a speed of 136 billion cell updates permore » second (GCUPS) was achieved on a dual Intel Xeon E5-2670 12-core processor system, the highest reported for an implementation based on Farrar’s ’striped’ approach. When using only a single thread, parasail was 1.7 times faster than Rognes’s SWIPE. For many score matrices, parasail is faster than BLAST. The software library is designed for 64 bit Linux, OS X, or Windows on processors with SSE2, SSE41, or AVX2. Source code is available from https://github.com/jeffdaily/parasail under the Battelle BSD-style license. In conclusion, applications that require optimal alignment scores could benefit from the improved performance. For the first time, SIMD global, semi-global, and local alignments are available in a stand-alone C library.« less

  18. A comparison between calculated and measured SHGC for complex fenestration systems

    SciTech Connect (OSTI)

    Klems, J.H.; Warner, J.L.; Kelley, G.O.

    1995-09-01

    Calorimetric measurements of dynamic net heat flow through a complex fenestration system consisting of a buff venetian blind inside clear double glazing are used to derive the direction-dependent beam SHGC (solar heat gain coefficient) of the fenestration. The data are compared with calculations according to a proposed general method for deriving complex fenestration system SHGC`s from bidirectional layer optical properties and generic calorimetric properties. Previously published optical data for the same venetian blind and generic inward-flowing fraction measurements are used in the calculation. Satisfactory agreement is found between SHGC measurements and calculation. Significant dependence on incident angle was found in the measured SHGC`s. Profile angle was not found to be a useful variable in characterizing the system performance. Predicted SHGC was found to be inherently dependent on two angles, although only the incident angle variations were observable under test conditions.

  19. Demonstration of a light-redirecting skylight system at the Palm Springs Chamber of Commerce

    SciTech Connect (OSTI)

    Lee, E.S.; Beltran, L.O.; Selkowitz, S.E. [Lawrence Berkeley National Lab., CA (United States); Lau, H.; Ander, G.D. [Southern California Edison, San Dimas, CA (United States)

    1996-05-01

    As part of a demonstration project to provide a comprehensive energy upgrade to a 294 m{sup 2} (3168 ft{sup 2}) commercial building, an advanced skylight design was developed using optical light control materials and geometry to provide daylight to two adjoining offices. The skylight system was developed using outdoor physical model tests and simulation tools Limited on-site measurements and occupant polls were conducted. Market issues were addressed. The skylight systems were found to improve lighting quality and to control excessive daylight illuminance levels compared to a conventional diffusing bubble skylight. Daylighting principles developed in earlier work for vertical glazing systems (light shelves and light pipes) were shown to be applicable in skylight designs at full-scale.

  20. National Library of Energy (Beta): the Department of Energy's National

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Resource for Energy Literacy, Innovation and Security - FAQ Frequently Asked Questions What is the National Library of EnergyBeta (NLEBeta)? Why was the NLEBeta created? What does the NLEBeta search? What DOE program offices and national laboratories are included in the NLEBeta? Does the NLEBeta include any classified information? Does the NLEBeta host, edit, or revise any of the content on the NLEBeta? How is the NLEBeta search related to the DOE Energy.gov search? How often will the

  1. DOE - NNSA/NFO -- Photo Library - Test Preparation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Test Preparation NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office Photo Library - Test Preparation Photos in this category depict preparations for past nuclear tests. The last test at the Nevada National Security Site was conducted in 1992, the year President Bush instituted a moratorium. Since that time, the United States has ceased all nuclear testing. Instructions: Click the photograph THUMBNAIL to view the photograph details Click the Category, Number, or Date table header links

  2. DOE - NNSA/NFO -- Photo Library Atmospheric Testing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Atmospheric NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office Photo Library - Atmospheric Testing A total of 100 atmospheric tests were conducted at the Nevada Test Site. These tests were conducted to provide information on weapons effects, effects of the height of burst on overpressure, and information on nuclear phenomena to improve the design of nuclear weapons. Atmospheric testing ceased for good in 1963, after which nuclear testing moved underground. Instructions: Click the

  3. DOE - NNSA/NFO -- Photo Library Cultural Resources

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cultural Resources NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office Photo Library - Cultural Resources Prehistoric cultural resources are abundant at the Nevada National Security Site, indicating Native Americans have occupied the region for more than 10,000 years. Historic artifacts of more recent origin are also present, reflecting use by miners, ranchers and settlers who traveled through the area. Instructions: Click the photograph THUMBNAIL to view the photograph details Click

  4. DOE - NNSA/NFO -- Photo Library Historical Miscellaneous

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Historical Miscellaneous NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office Photo Library - Historical Miscellaneous Photos related to the Nevada National Security Site History which do not fall under the other photo categories Instructions: Click the photograph THUMBNAIL to view the photograph details Click the Category, Number, or Date table header links to sort the information The photographs are displayed in groups of ten (10). Click the Next and Previous link at the bottom to

  5. DOE - NNSA/NFO -- Photo Library NNSS History

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nevada National Security Site History NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office Photo Library - Nevada National Security Site History The Nevada National Security Site story begins in 1948 after the atomic test series Operation Sandstone in the Enewetak atoll. In 1950, a more complete survey of the south site, amid the Las Vegas Bombing and Gunnery Range, was conducted and resulted in test officials' endorsements. In December, the United States Air Force, landlord of the

  6. DOE - NNSA/NFO -- Photo Library OPERATION DOORSTEP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Operation Doorstep NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office Photo Library - Operation Doorstep Operation Doorstep and Operation Cue. This video shows Federal Civil Defense Administration film footage. In the Operation Doorstep portion, footage shows blast and thermal effects on mannequins, automobiles, and wooden frame houses. [ Full Text ] Instructions: Click the photograph THUMBNAIL to view the photograph details Click the Category, Number, or Date table header links to

  7. DOE - NNSA/NFO -- Photo Library OPERATION TEAPOT

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Operation Teapot NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office Photo Library - Operation Teapot Operation Teapot consisted of 14 nuclear tests. The goal of the series was to test nuclear devices for possible inclusion in the nuclear weapons stockpile; improve military tactics, equipment and training; and study civil defense requirements. [ Full Text ] Instructions: Click the photograph THUMBNAIL to view the photograph details Click the Category, Number, or Date table header links

  8. DOE - NNSA/NFO -- Photo Library Subcritical experiments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Subcritical Experiments NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office Photo Library - Subcritical experiments The underground U1a Complex is the location for subcritical experiments. Subcritical experiments are physics experiments that obtain technical information to help the National Laboratories maintain the safety and reliability of the U.S. nuclear weapons stockpile. Instructions: Click the photograph THUMBNAIL to view the photograph details Click the Category, Number, or

  9. DOE - NNSA/NFO -- Photo Library TUMBLER-SNAPPER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tumbler - Snapper NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office Photo Library - Tumbler-Snapper Operation Tumbler-Snapper consisted of eight nuclear shots in two phases. The Tumbler phase was of primary concern to the Department of Defense, which called for airdropped nuclear weapons tests. The Snapper second phase was a set of experiments conducted by the Atomic Energy Commission and the Los Alamos Scientific Laboratory to help improve effects of nuclear weapons. [ Full Text ]

  10. DOE - NNSA/NFO -- Photo Library Upshot-Knothole

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Upshot-Knothole NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office Photo Library - Upshot Knothole This operation conducted at the Nevada National Security Site consisted of 11 atmospheric tests. There were three airdrops, seven tower tests, and one airburst. Conducted between March 17 and June 4, 1953, this operation involved the testing of new theories, using both fission and fusion devices. [ Full Text ] Instructions: Click the photograph THUMBNAIL to view the photograph details

  11. Latin Hypercube Sampling (LHS) UNIX Library/Standalone

    Energy Science and Technology Software Center (OSTI)

    2004-05-13

    The LHS UNIX Library/Standalone software provides the capability to draw random samples from over 30 distribution types. It performs the sampling by a stratified sampling method called Latin Hypercube Sampling (LHS). Multiple distributions can be sampled simultaneously, with user-specified correlations amongst the input distributions, LHS UNIX Library/ Standalone provides a way to generate multi-variate samples. The LHS samples can be generated either as a callable library (e.g., from within the DAKOTA software framework) or asmore » a standalone capability. LHS UNIX Library/Standalone uses the Latin Hypercube Sampling method (LHS) to generate samples. LHS is a constrained Monte Carlo sampling scheme. In LHS, the range of each variable is divided into non-overlapping intervals on the basis of equal probability. A sample is selected at random with respect to the probability density in each interval, If multiple variables are sampled simultaneously, then values obtained for each are paired in a random manner with the n values of the other variables. In some cases, the pairing is restricted to obtain specified correlations amongst the input variables. Many simulation codes have input parameters that are uncertain and can be specified by a distribution, To perform uncertainty analysis and sensitivity analysis, random values are drawn from the input parameter distributions, and the simulation is run with these values to obtain output values. If this is done repeatedly, with many input samples drawn, one can build up a distribution of the output as well as examine correlations between input and output variables.« less

  12. Parallel Element Agglomeration Algebraic Multigrid and Upscaling Library

    Energy Science and Technology Software Center (OSTI)

    2015-02-19

    ParFELAG is a parallel distributed memory C++ library for numerical upscaling of finite element discretizations. It provides optimal complesity algorithms ro build multilevel hierarchies and solvers that can be used for solving a wide class of partial differential equations (elliptic, hyperbolic, saddle point problems) on general unstructured mesh (under the assumption that the topology of the agglomerated entities is correct). Additionally, a novel multilevel solver for saddle point problems with divergence constraint is implemented.

  13. National Library of Energy (BETA): the Department of Energy's National

    Office of Scientific and Technical Information (OSTI)

    Resource for Energy Literacy, Innovation and Security - About NLE About The Department of Energy (DOE) National Library of EnergyBeta (NLEBeta) is a national resource to advance energy literacy, innovation and security. The NLEBeta is a new search tool designed to make it easier for American citizens to find and access information from across the DOE complex nationwide, without knowing DOE's organizational structure. Such information is offered by DOE to advance its four broad mission areas:

  14. National Library of Energy (Beta): the Department of Energy's National

    Office of Scientific and Technical Information (OSTI)

    Resource for Energy Literacy, Innovation and Security - FAQ Frequently Asked Questions What is the National Library of EnergyBeta (NLEBeta)? Why was the NLEBeta created? What does the NLEBeta search? What DOE program offices and national laboratories are included in the NLEBeta? Does the NLEBeta include any classified information? Does the NLEBeta host, edit, or revise any of the content on the NLEBeta? How is the NLEBeta search related to the DOE Energy.gov search? How often will the

  15. High-Throughput Plasmid cDNA Library Screening

    SciTech Connect (OSTI)

    Wan, Kenneth H.; Yu, Charles; George, Reed A.; Carlson, JosephW.; Hoskins, Roger A.; Svirskas, Robert; Stapleton, Mark; Celniker, SusanE.

    2006-05-24

    Libraries of cDNA clones are valuable resources foranalysing the expression, structure, and regulation of genes, as well asfor studying protein functions and interactions. Full-length cDNA clonesprovide information about intron and exon structures, splice junctionsand 5'- and 3'-untranslated regions (UTRs). Open reading frames (ORFs)derived from cDNA clones can be used to generate constructs allowingexpression of native proteins and N- or C-terminally tagged proteins.Thus, obtaining full-length cDNA clones and sequences for most or allgenes in an organism is critical for understanding genome functions.Expressed sequence tag (EST) sequencing samples cDNA libraries at random,which is most useful at the beginning of large-scale screening projects.However, as projects progress towards completion, the probability ofidentifying unique cDNAs via EST sequencing diminishes, resulting in poorrecovery of rare transcripts. We describe an adapted, high-throughputprotocol intended for recovery of specific, full-length clones fromplasmid cDNA libraries in five days.

  16. OPAL: An Open-Source MPI-IO Library over Cray XT

    SciTech Connect (OSTI)

    Yu, Weikuan; Vetter, Jeffrey S; Canon, Richard Shane

    2007-01-01

    Parallel IO over Cray XT is supported by a vendor-supplied MPI-IO package. This package contains a proprietary ADIO implementation built on top of the sysio library. While it is reasonable to maintain a stable code base for application scientists' convenience, it is also very important to the system developers and researchers to analyze and assess the effectiveness of parallel IO software, and accordingly, tune and optimize the MPI-IO implementation. A proprietary parallel IO code base relinquishes such flexibilities. On the other hand, a generic UFS-based MPI-IO implementation is typically used on many Linux-based platforms. We have developed an open-source MPI-IO package over Lustre, referred to as OPAL (OPportunistic and Adaptive MPI-IO Library over Lustre). OPAL provides a single source-code base for MPI-IO over Lustre on Cray XT and Linux platforms. Compared to Cray implementation, OPAL provides a number of good features, including arbitrary specification of striping patterns and Lustre-stripe aligned file domain partitioning. This paper presents the performance comparisons between OPAL and Cray's proprietary implementation. Our evaluation demonstrates that OPAL achieves the performance comparable to the Cray implementation. We also exemplify the benefits of an open source package in revealing the underpinning of the parallel IO performance.

  17. MCNP Super Lattice Method for VHTR ORIGEN2.2 Nuclear Library Improvement Based on ENDF/B-VII

    SciTech Connect (OSTI)

    G. S. Chang; J. R. Parry

    2010-10-01

    The advanced Very High Temperature gas-cooled Reactor (VHTR) achieves simplification of safety through reliance on innovative features and passive systems. One of the VHTRs innovative features is the reliance on ceramic-coated fuel particles to retain the fission products under extreme accident conditions. The effect of the random fuel kernel distribution in the fuel prismatic block creates a double-heterogeneous lattice, which needs to be addressed through the use of the newly developed prismatic super Kernel-by-Kernel Fuel (KbKF) lattice model method. Based on the new ENDF/B-VII nuclear cross section evaluated data, the developed KbKF super lattice model was then used with MCNP to calculate the material isotopes neutron reaction rates, such as, (n,?); (n,n); (n,2n); (n,f); (n,p); (n,?). Then, the MCNP-calculated results are rearranged to generate a set of new libraries VHTRXS.lib, for the ORIGEN2.2 isotopes depletion and build-up analysis code. The libraries contain one group cross section data for the structural light elements, actinides, and fission products that can be applied in the VHTR related fuel burnup and material transmutation analysis codes. The efficiency and ease of use of the MCNP method to generate and update the ORIGEN2.2 one-group spectrum weighed cross section library for VHTR was demonstrated.

  18. Fenestration System Performance Research, Testing, and Evaluation

    SciTech Connect (OSTI)

    Jim Benney

    2009-11-30

    The US DOE was and is instrumental to NFRC's beginning and its continued success. The 2005 to 2009 funding enables NFRC to continue expanding and create new, improved ratings procedures. Research funded by the US DOE enables increased fenestration energy rating accuracy. International harmonization efforts supported by the US DOE allow the US to be the global leader in fenestration energy ratings. Many other governments are working with the NFRC to share its experience and knowledge toward development of their own national fenestration rating process similar to the NFRC's. The broad and diverse membership composition of NFRC allows anyone with a fenestration interest to come forward with an idea or improvement to the entire fenestration community for consideration. The NFRC looks forward to the next several years of growth while remaining the nation's resource for fair, accurate, and credible fenestration product energy ratings. NFRC continues to improve its rating system by considering new research, methodologies, and expanding to include new fenestration products. Currently, NFRC is working towards attachment energy ratings. Attachments are blinds, shades, awnings, and overhangs. Attachments may enable a building to achieve significant energy savings. An NFRC rating will enable fair competition, a basis for code references, and a new ENERGY STAR product category. NFRC also is developing rating methods to consider non specular glazing such as fritted glass. Commercial applications frequently use fritted glazing, but no rating method exists. NFRC is testing new software that may enable this new rating and contribute further to energy conservation. Around the world, many nations are seeking new energy conservation methods and NFRC is poised to harmonize its rating system assisting these nations to better manage and conserve energy in buildings by using NFRC rated and labeled fenestration products. As this report has shown, much more work needs to be done to

  19. Library API for Z-Order Memory Layout

    Energy Science and Technology Software Center (OSTI)

    2015-02-01

    This library provides a simple-to-use API for implementing an altnerative to traditional row-major order in-memory layout, one based on a Morton- order space filling curve (SFC) , specifically, a Z-order variant of the Morton order curve. The library enables programmers to, after a simple initialization step, to convert a multidimensional array from row-major to Z- order layouts, then use a single, generic API call to access data from any arbitrary (i,j,k) location from within themore » array, whether it it be stored in row- major or z-order format. The motivation for using a SFC in-memory layout is for improved spatial locality, which results in increased use of local high speed cache memory. The basic idea is that with row-major order layouts, a data access to some location that is nearby in index space is likely far away in physical memory, resulting in poor spatial locality and slow runtime. On the other hand, with a SFC-based layout, accesses that are nearby in index space are much more likely to also be nearby in physical memory, resulting in much better spatial locality, and better runtime performance. Numerous studies over the years have shown significant runtime performance gains are realized by using a SFC-based memory layout compared to a row-major layout, sometimes by as much as 50%, which result from the better use of the memory and cache hierarchy that are attendant with a SFC-based layout (see, for example, [Beth2012]). This library implementation is intended for use with codes that work with structured, array-based data in 2 or 3 dimensions. It is not appropriate for use with unstructured or point-based data.« less

  20. Final report: Efficient and user friendly C++ library for differential algebra

    SciTech Connect (OSTI)

    Svetlana G. Shasharina

    1998-09-29

    In Phase I we proposed the following tasks: Task 1: Identify the units of the Differential Algebra (DA) library, i.e. determine the abstract data types of the DA and the relations between them. Develop the interfaces (.h files) for the DA vectors. Task 2: Implement the DA vector class with garbage collection and expression templates for optimizing all overloaded operators by minimizing creation of temporaries and fusing loops. Task 3: Implement the prototype GUI for instantiating systems from files and invoking the DA methods. Task 4: Develop a suite of tests for the DA vector class and the needed utilities classes. Task 5: Write the final report on this work. This will include documentation on the use of the code. We have completed these tasks. In this section we discuss the results of our work.

  1. Bibliography of the seasonal thermal energy storage library

    SciTech Connect (OSTI)

    Prater, L.S.; Casper, G.; Kawin, R.A.

    1981-08-01

    The Main Listing is arranged alphabetically by the last name of the first author. Each citation includes the author's name, title, publisher, publication date, and where applicable, the National Technical Information Service (NTIS) number or other document number. The number preceding each citation is the identification number for that document in the Seasonal Thermal Energy Storage (STES) Library. Occasionally, one or two alphabetic characters are added to the identification number. These alphabetic characters indicate that the document is contained in a collection of papers, such as the proceedings of a conference. An Author Index and an Identification Number Index are included. (WHK)

  2. An Electron/Photon/Relaxation Data Library for MCNP6

    SciTech Connect (OSTI)

    Hughes, III, H. Grady

    2015-08-07

    The capabilities of the MCNP6 Monte Carlo code in simulation of electron transport, photon transport, and atomic relaxation have recently been significantly expanded. The enhancements include not only the extension of existing data and methods to lower energies, but also the introduction of new categories of data and methods. Support of these new capabilities has required major additions to and redesign of the associated data tables. In this paper we present the first complete documentation of the contents and format of the new electron-photon-relaxation data library now available with the initial production release of MCNP6.

  3. DOE - NNSA/NFO -- Photo Library EPA Farm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    EPA Farm NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office Photo Library - EPA Farm In November 1981, the last cattle roundup took place at the U.S. Department of Energy's (DOE) experimental farm, managed for DOE by the U.S. Environmental Protection Agency (EPA). Operations at this unique 30-acre experimental farm in Area 15 started in 1964 when the EPA was contracted to conduct research to determine if radioactive materials found in the environment were being transported to humans.

  4. DOE - NNSA/NFO -- Photo Library News & Views

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    News & Views NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office Photo Library - NTS 50th Anniversary Newsletter (News & Views) This special issue of the NTS News & Views is dedicated to the thousands of men and women at the Nevada National Security Site (NNSS), who for 42 years have provided this Nation with a safe, strong and effective nuclear deterrent. This issue spotlights major events at the NTS from 1951 through 1993. Instructions: Click the photograph THUMBNAIL to

  5. DOE - NNSA/NFO -- Photo Library OPERATION IVY

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Operation Ivy NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office Photo Library - Operation Ivy Operation Ivy, Parts 1 and 2 - "The island of Elugelab is missing!" President Eisenhower heard this short report on the Mike shot in Operation Ivy from Gordon Dean, Chairman of the Atomic Energy Commission. Mike was the first full-fledged hydrogen bomb to be tested. [ Full Text ] Instructions: Click the photograph THUMBNAIL to view the photograph details Click the Category, Number,

  6. Catalog of the Oak Ridge National Laboratory Meteorological Tape Library

    SciTech Connect (OSTI)

    Bell, M.A.

    1983-08-01

    This report gives a complete inventory of the data tapes in the ORNL Meteorological Tape Library (OMTL). The attributes of each tape, including location of the weather station (city and state), station number, standard data format, dates covered, data set name(s), and job control language considerations (record format, record length, blocksize, tape label, and tape density), are listed for each tape. In addition, a description of some of the special characteristics of each of the available standard meteorological data formats is presented.

  7. National Library of Energy (BETA): the Department of Energy's National

    Office of Scientific and Technical Information (OSTI)

    Resource for Energy Literacy, Innovation and Security - Communications The National Library of EnergyBeta (NLEBeta) Information Sources A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 88-Inch Cyclotron A Accelerator Test Facility Advanced Light Source Advanced Photon Source Advanced Research Projects Agency - Energy Advanced Test Reactor National Scientific User Facility Albuquerque Complex Alcator C-Mod Alternative Fuels and Advanced Vehicles Data Center Ames Laboratory Ames Site Office

  8. Development of High Throughput Process for Constructing 454 Titanium and Illumina Libraries

    SciTech Connect (OSTI)

    Deshpande, Shweta; Hack, Christopher; Tang, Eric; Malfatti, Stephanie; Ewing, Aren; Lucas, Susan; Cheng, Jan-Fang

    2010-05-28

    We have developed two processes with the Biomek FX robot to construct 454 titanium and Illumina libraries in order to meet the increasing library demands. All modifications in the library construction steps were made to enable the adaptation of the entire processes to work with the 96-well plate format. The key modifications include the shearing of DNA with Covaris E210 and the enzymatic reaction cleaning and fragment size selection with SPRI beads and magnetic plate holders. The construction of 96 Titanium libraries takes about 8 hours from sheared DNA to ssDNA recovery. The processing of 96 Illumina libraries takes less time than that of the Titanium library process. Although both processes still require manual transfer of plates from robot to other work stations such as thermocyclers, these robotic processes represent about 12- to 24-folds increase of library capacity comparing to the manual processes. To enable the sequencing of many libraries in parallel, we have also developed sets of molecular barcodes for both library types. The requirements for the 454 library barcodes include 10 bases, 40-60percent GC, no consecutive same base, and no less than 3 bases difference between barcodes. We have used 96 of the resulted 270 barcodes to construct libraries and pool to test the ability of accurately assigning reads to the right samples. When allowing 1 base error occurred in the 10 base barcodes, we could assign 99.6percent of the total reads and 100percent of them were uniquely assigned. As for the Illumina barcodes, the requirements include 4 bases, balanced GC, and at least 2 bases difference between barcodes. We have begun to assess the ability to assign reads after pooling different number of libraries. We will discuss the progress and the challenges of these scale-up processes.

  9. MCNP Continuous-Energy Neutron Cross Section Libraries for Temperatures from 300 to 1365K.

    Energy Science and Technology Software Center (OSTI)

    2001-04-19

    Version 00 UTXS is a project whereby continuous-energy cross section libraries in ACE format suitable for the MCNP code were generated using the NJOY94.105 processing code. Libraries for various materials were generated at typical operating temperatures of the US Pressurized Water Reactor (PWR), Boiling Water Reactor (BWR), and the Russian PWR (VVER) as well as libraries for other non-reactor applications such as nuclear medicine.

  10. MT71x: Multi-Temperature Library Based on ENDF/B-VII.1

    SciTech Connect (OSTI)

    Conlin, Jeremy Lloyd; Parsons, Donald Kent; Gray, Mark Girard; Lee, Mary Beth; White, Morgan Curtis

    2015-12-16

    The Nuclear Data Team has released a multitemperature transport library, MT71x, based upon ENDF/B-VII.1 with a few modifications as well as additional evaluations for a total of 427 isotope tables. The library was processed using NJOY2012.39 into 23 temperatures. MT71x consists of two sub-libraries; MT71xMG for multigroup energy representation data and MT71xCE for continuous energy representation data. These sub-libraries are suitable for deterministic transport and Monte Carlo transport applications, respectively. The SZAs used are the same for the two sub-libraries; that is, the same SZA can be used for both libraries. This makes comparisons between the two libraries and between deterministic and Monte Carlo codes straightforward. Both the multigroup energy and continuous energy libraries were verified and validated with our checking codes checkmg and checkace (multigroup and continuous energy, respectively) Then an expanded suite of tests was used for additional verification and, finally, verified using an extensive suite of critical benchmark models. We feel that this library is suitable for all calculations and is particularly useful for calculations sensitive to temperature effects.

  11. SEP Success Story: Library Patrons in New York Check-Out Renewable...

    Broader source: Energy.gov (indexed) [DOE]

    at Night | Photo Courtesy of Homewood Public Library When Energy Efficiency Upgrades and Ghost Stories Meet SEP Success Story: Launching Green Entrepreneurship in New Hampshire

  12. NREL's Building Component Library for Use with Energy Models

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    The Building Component Library (BCL) is the U.S. Department of Energy’s comprehensive online searchable library of energy modeling building blocks and descriptive metadata. Novice users and seasoned practitioners can use the freely available and uniquely identifiable components to create energy models and cite the sources of input data, which will increase the credibility and reproducibility of their simulations. The BCL contains components which are the building blocks of an energy model. They can represent physical characteristics of the building such as roofs, walls, and windows, or can refer to related operational information such as occupancy and equipment schedules and weather information. Each component is identified through a set of attributes that are specific to its type, as well as other metadata such as provenance information and associated files. The BCL also contains energy conservation measures (ECM), referred to as measures, which describe a change to a building and its associated model. For the BCL, this description attempts to define a measure for reproducible application, either to compare it to a baseline model, to estimate potential energy savings, or to examine the effects of a particular implementation. The BCL currently contains more than 30,000 components and measures. A faceted search mechanism has been implemented on the BCL that allows users to filter through the search results using various facets. Facet categories include component and measure types, data source, and energy modeling software type. All attributes of a component or measure can also be used to filter the results.

  13. DIATOM (Data Initialization and Modification) Library Version 7.0

    SciTech Connect (OSTI)

    Crawford, David A.; Schmitt, Robert G.; Hensinger, David M.; Petney, Sharon; Bruner, Christopher; Mosso, Stewart John

    2015-06-25

    DIATOM is a library that provides numerical simulation software with a computational geometry front end that can be used to build up complex problem geometries from collections of simpler shapes. The library provides a parser which allows for application-independent geometry descriptions to be embedded in simulation software input decks. Descriptions take the form of collections of primitive shapes and/or CAD input files and material properties that can be used to describe complex spatial and temporal distributions of numerical quantities (often called “database variables” or “fields”) to help define starting conditions for numerical simulations. The capability is designed to be general purpose, robust and computationally efficient. By using a combination of computational geometry and recursive divide-and-conquer approximation techniques, a wide range of primitive shapes are supported to arbitrary degrees of fidelity, controllable through user input and limited only by machine resources. Through the use of call-back functions, numerical simulation software can request the value of a field at any time or location in the problem domain. Typically, this is used only for defining initial conditions, but the capability is not limited to just that use. The most recent version of DIATOM provides the ability to import the solution field from one numerical solution as input for another.

  14. NREL's Building Component Library for Use with Energy Models

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    The Building Component Library (BCL) is the U.S. Department of Energys comprehensive online searchable library of energy modeling building blocks and descriptive metadata. Novice users and seasoned practitioners can use the freely available and uniquely identifiable components to create energy models and cite the sources of input data, which will increase the credibility and reproducibility of their simulations. The BCL contains components which are the building blocks of an energy model. They can represent physical characteristics of the building such as roofs, walls, and windows, or can refer to related operational information such as occupancy and equipment schedules and weather information. Each component is identified through a set of attributes that are specific to its type, as well as other metadata such as provenance information and associated files. The BCL also contains energy conservation measures (ECM), referred to as measures, which describe a change to a building and its associated model. For the BCL, this description attempts to define a measure for reproducible application, either to compare it to a baseline model, to estimate potential energy savings, or to examine the effects of a particular implementation. The BCL currently contains more than 30,000 components and measures. A faceted search mechanism has been implemented on the BCL that allows users to filter through the search results using various facets. Facet categories include component and measure types, data source, and energy modeling software type. All attributes of a component or measure can also be used to filter the results.

  15. DIATOM (Data Initialization and Modification) Library Version 7.0

    Energy Science and Technology Software Center (OSTI)

    2015-06-25

    DIATOM is a library that provides numerical simulation software with a computational geometry front end that can be used to build up complex problem geometries from collections of simpler shapes. The library provides a parser which allows for application-independent geometry descriptions to be embedded in simulation software input decks. Descriptions take the form of collections of primitive shapes and/or CAD input files and material properties that can be used to describe complex spatial and temporalmore » distributions of numerical quantities (often called “database variables” or “fields”) to help define starting conditions for numerical simulations. The capability is designed to be general purpose, robust and computationally efficient. By using a combination of computational geometry and recursive divide-and-conquer approximation techniques, a wide range of primitive shapes are supported to arbitrary degrees of fidelity, controllable through user input and limited only by machine resources. Through the use of call-back functions, numerical simulation software can request the value of a field at any time or location in the problem domain. Typically, this is used only for defining initial conditions, but the capability is not limited to just that use. The most recent version of DIATOM provides the ability to import the solution field from one numerical solution as input for another.« less

  16. Release of the 2008 Evaluated Nuclear Data Library (ENDL2008)

    SciTech Connect (OSTI)

    Brown, D A; Descalle, M; Hoffman, R; Kelley, K; Navratil, P; Pruet, J; Summers, N; Thompson, I; Vogt, R

    2009-05-08

    Livermore's N-Division is now releasing the first version of a major new nuclear data library. This includes some 500 evaluations (roughly four times the number in the previous standard) and many physics improvements important for calculating weapon performance, output effects, attribution signatures, key radiochemical diagnostics and performance of conventional and hybrid fission/fusion reactors. As this library is more extensive and on a much firmer nuclear physics footing than the previous ENDL99 it should become, after a period of trial use by the applied community, the new standard for programmatic applications at Livermore. This work was supported by ASC-PEM and Campaign 4. Our basic philosophy in this release was to adopt the best work of the world's different nuclear data efforts. We have drawn heavily from the U.S. ENDF project (led by Brookhaven), the Japanese JENDL project (JAEA), and the European JEFF project (NEA). Because those efforts tend to focus on reactor applications they do not include an account of the charged particles emitted following a reaction. To enable broader applications we have used theory-based calculations to add a complete description of charged particles in all evaluations in the new library. This release also includes results from the last ten years of theory and experimental work here at Livermore. Some of the most important results include the surrogate campaign for unstable uranium isotopes, the LLNL/LANL 239Pu(n,2n) evaluation, the 241Am(n,2n) evaluation validated by the recent Livermore-led experiments, and measurements of 48Ti(n,2n). As well, we have adopted more than a hundred theory-based evaluations for radiochemical diagnostics completed by R. Hoffman and M. Mustafa and that use improved optical models, level densities, and decay scheme evaluations from the theory effort. These were extended to be transport complete (they now include a description of all of the particles emitted in reactions) to enable their use in

  17. EAGLE: 'EAGLE'Is an' Algorithmic Graph Library for Exploration

    SciTech Connect (OSTI)

    2015-01-16

    The Resource Description Framework (RDF) and SPARQL Protocol and RDF Query Language (SPARQL) were introduced about a decade ago to enable flexible schema-free data interchange on the Semantic Web. Today data scientists use the framework as a scalable graph representation for integrating, querying, exploring and analyzing data sets hosted at different sources. With increasing adoption, the need for graph mining capabilities for the Semantic Web has emerged. Today there is no tools to conduct "graph mining" on RDF standard data sets. We address that need through implementation of popular iterative Graph Mining algorithms (Triangle count, Connected component analysis, degree distribution, diversity degree, PageRank, etc.). We implement these algorithms as SPARQL queries, wrapped within Python scripts and call our software tool as EAGLE. In RDF style, EAGLE stands for "EAGLE 'Is an' algorithmic graph library for exploration. EAGLE is like 'MATLAB' for 'Linked Data.'

  18. libMSR library and msr-safe kernel module

    Energy Science and Technology Software Center (OSTI)

    2013-09-26

    Modern processors offer a wide range of control and measurement features. While those are traditionally accessed through libraries like PAPI, some newer features no longer follow the traditional model of counters that can be used to only read the state of the processor. For example, Precise Event Based Sampling (PEBS) can generate records that requires a kernel memory for storage. Additionally, new features like power capping and thermal control require similar new access methods. Allmore » of these features are ultimately controlled through Model Specific Registers (MSRs). We therefore need new mechanisms to make such features available to tools and ultimately to the user. libMSR provides a convenient interface to access MSRs and to allow tools to utilize their full functionality.« less

  19. EAGLE: 'EAGLE'Is an' Algorithmic Graph Library for Exploration

    Energy Science and Technology Software Center (OSTI)

    2015-01-16

    The Resource Description Framework (RDF) and SPARQL Protocol and RDF Query Language (SPARQL) were introduced about a decade ago to enable flexible schema-free data interchange on the Semantic Web. Today data scientists use the framework as a scalable graph representation for integrating, querying, exploring and analyzing data sets hosted at different sources. With increasing adoption, the need for graph mining capabilities for the Semantic Web has emerged. Today there is no tools to conduct "graphmore » mining" on RDF standard data sets. We address that need through implementation of popular iterative Graph Mining algorithms (Triangle count, Connected component analysis, degree distribution, diversity degree, PageRank, etc.). We implement these algorithms as SPARQL queries, wrapped within Python scripts and call our software tool as EAGLE. In RDF style, EAGLE stands for "EAGLE 'Is an' algorithmic graph library for exploration. EAGLE is like 'MATLAB' for 'Linked Data.'« less

  20. Tips and Tricks of Incorporating Industry Standards into a Library Collection

    SciTech Connect (OSTI)

    Abbott, Jennifer; Sandberg, Tami

    2015-11-05

    Professional literature on the incorporation of industry standards into a library collection is somewhat limited. The objective of this presentation is to discuss the intricate details of acquiring, managing, and delivering electronic industry standards to library patrons in a seamless manner. Lessons learned regarding vendor selection and license agreements will also be discussed. Results from a survey administer at the National Renewable Energy Laboratory will be used to analyze how collection policies can properly be developed to incorporate industry standards into a library setting. The key points of acquisition decisions, avoidance of liability issues, and cost will be addressed.

  1. MPH: A Library for Distributed Multi-Component Environment

    Energy Science and Technology Software Center (OSTI)

    2001-05-01

    A growing trend in developing large and complex applications on today's Teraflops compyters is to integrate stand-alone and/or semi-independent program components into a comprehensive simulation package. We develop MPH, a multi-component handshaking library that allows component models recognize and talk to each other in a convenient and consisten way, thus to run multi-component ulti-executable applications effectively on distributed memory architectures. MPH provides the following capabilities: component name registration, resource allocation, inter-component communication, inquiry on themore » multi-component environment, standard in/out redirect. It supports the following four integration mechanisms: Multi-Component Single-Executable (MCSE); Single-Component Multi-Executable (SCME); Multi-Component Multi-Executable (MCME); Multi-instance Multi-Executable (MIME). MPH currently works on IBM SP, SGI Origin, Compaq AlphaSC, Cray T3E, and PC clusters. It is being adopted in NCAR's CCSM and Colorado State University's icosahedra grid coupled model. A joint communicator between any two components could be created. MPI communication between local processors and remote processors are invoked through component names and the local id. More functions are available to inquire the global-id, local-id, number of executales, etc.« less

  2. Manycore Performance-Portability: Kokkos Multidimensional Array Library

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Edwards, H. Carter; Sunderland, Daniel; Porter, Vicki; Amsler, Chris; Mish, Sam

    2012-01-01

    Large, complex scientific and engineering application code have a significant investment in computational kernels to implement their mathematical models. Porting these computational kernels to the collection of modern manycore accelerator devices is a major challenge in that these devices have diverse programming models, application programming interfaces (APIs), and performance requirements. The Kokkos Array programming model provides library-based approach to implement computational kernels that are performance-portable to CPU-multicore and GPGPU accelerator devices. This programming model is based upon three fundamental concepts: (1) manycore compute devices each with its own memory space, (2) data parallel kernels and (3) multidimensional arrays. Kernel executionmore » performance is, especially for NVIDIA® devices, extremely dependent on data access patterns. Optimal data access pattern can be different for different manycore devices – potentially leading to different implementations of computational kernels specialized for different devices. The Kokkos Array programming model supports performance-portable kernels by (1) separating data access patterns from computational kernels through a multidimensional array API and (2) introduce device-specific data access mappings when a kernel is compiled. An implementation of Kokkos Array is available through Trilinos [Trilinos website, http://trilinos.sandia.gov/, August 2011].« less

  3. Predicting Reservoir System Quality and Performance | Open Energy...

    Open Energy Info (EERE)

    to library Book Section: Predicting Reservoir System Quality and Performance Authors D.J. Hartmann and E.A. Beaumont Editors E.A. Beaumont and N.H. Foster Published AAPG...

  4. Development of a New 47-Group Library for the CASL Neutronics Simulators

    SciTech Connect (OSTI)

    Kim, Kang Seog; Williams, Mark L; Wiarda, Dorothea; Godfrey, Andrew T

    2015-01-01

    The CASL core simulator MPACT is under development for the neutronics and thermal-hydraulics coupled simulation for the pressurized light water reactors. The key characteristics of the MPACT code include a subgroup method for resonance self-shielding, and a whole core solver with a 1D/2D synthesis method. The ORNL AMPX/SCALE code packages have been significantly improved to support various intermediate resonance self-shielding approximations such as the subgroup and embedded self-shielding methods. New 47-group AMPX and MPACT libraries based on ENDF/B-VII.0 have been generated for the CASL core simulator MPACT of which group structure comes from the HELIOS library. The new 47-group MPACT library includes all nuclear data required for static and transient core simulations. This study discusses a detailed procedure to generate the 47-group AMPX and MPACT libraries and benchmark results for the VERA progression problems.

  5. Office of Civil Rights NA-1.2 VIDEO LIBRARY Item Title

    National Nuclear Security Administration (NNSA)

    People w Joe Gilliam 1 CD 1 41 min 2003 Sound Solutions Learning Library-Rockhurst University Continuing Education Press 3 How To Handle Difficult People w Joe Gilliam 1 ...

  6. Photo Library of the Nevada Site Office (Includes historical archive of nuclear testing images)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    The Nevada Site Office makes available publicly released photos from their archive that includes photos from both current programs and historical activities. The historical collections include atmospheric and underground nuclear testing photos and photos of other events and people related to the Nevada Test Site. Current collections are focused on homeland security, stockpile stewardship, and environmental management and restoration. See also the Historical Film Library at http://www.nv.doe.gov/library/films/testfilms.aspx and the Current Film Library at http://www.nv.doe.gov/library/films/current.aspx. Current films can be viewed online, but only short clips of the historical films are viewable. They can be ordered via an online request form for a very small shipping and handling fee.

  7. Lawrence Livermore National Laboratory Evaluated Nuclear Data Library in ENDF-V Format.

    Energy Science and Technology Software Center (OSTI)

    1986-08-06

    Version 00 This library contains the Evaluated Nuclear Data Library (ENDL) of the Lawrence Livermore National Laboratory as of 1984. The library has been converted to the ENDF-V format by Lawrence Livermore National Laboratory and the IAEA Nuclear Data Section. The library contains evaluated neutron cross sections and differential data and neutron induced photon production data for 94 materials and includes a total of 231,348 records. All evaluations are complete, covering all relevant reactions formore » incident energies from 10-4 eV to 20 MeV. All cross sections are represented in tabulated linearly interpolable form; resonance parameters are not used.« less

  8. Construction of highly extensive polymorphic DNA libraries by in-gel competitive reassociation procedure

    SciTech Connect (OSTI)

    Inoue, Shinichi; Kiyama, Ryoiti; Oishi, Michio

    1996-02-01

    Differential genomic DNA libraries between two mouse strains and from two human individuals were constructed by means of the in-gel competitive reassociation (IGCR) procedure, a procedure developed for cloning altered anonymous restriction fragments. The libraries were highly enriched fragments, approximately 60 and 40% for the mouse and human libraries, respectively, and, more importantly, maintained most of the original complexities of the RFLP fragments. Therefore, differential genomic DNA libraries constructed by the IGCR procedure, particularly for human genomic DNA, should offer highly extensive sources for polymorphic DNA sequences necessary for a variety of genome analyses, including studies on the origin and mechanism of biological diversity among the same species. 19 refs., 4 figs.

  9. AMPX 175-n,42-g Multigroup X-section Library for Nuclear Fusion Applications.

    Energy Science and Technology Software Center (OSTI)

    2009-06-15

    Version 00 This library has been widely used by ENEA group in neutron/gamma transport calculations for ITER safety assessment via the SCALENEA-1 multipurpose Sn calculation sequence.

  10. Office of Civil Rights NA-1.2 VIDEO LIBRARY Item Title

    National Nuclear Security Administration (NNSA)

    Persuasion w Jordan Davis 1 CD 1 49 min 2004 Sound Solutions Learning Library-Rockhurst University Continuing Education Press 8 The Power of Persuasion w Jordan Davis 1 CD 2 40 ...

  11. Resolved: "error while loading shared libraries: libalpslli.so.0" with

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    serial codes on login nodes "error while loading shared libraries: libalpslli.so.0" with serial codes on login nodes Resolved: "error while loading shared libraries: libalpslli.so.0" with serial codes on login nodes December 13, 2013 by Helen He Symptom: Dynamic executables built with compiler wrappers running directly on the external login nodes are getting the following error message: % ftn -dynamic -o testf testf.f % ./testf ./testf: error while loading shared

  12. Sandia, UCLA develop screening libraries to discover drug targets for viral

    National Nuclear Security Administration (NNSA)

    infections | National Nuclear Security Administration | (NNSA) Sandia, UCLA develop screening libraries to discover drug targets for viral infections Friday, April 22, 2016 - 12:00am From left, Sandia National Laboratories researchers Oscar Negrete, Edwin Saada and Sara Bird check out a CRISPR library preparation. The work is part of the first-ever Cooperative Research and Development Agreement between Sandia and UCLA. As headlines highlight the threat of viruses like Ebola and Zika,

  13. TOXNET and Beyond-Using the National Library of Medicine's Environmental Health and Toxicology Portal

    SciTech Connect (OSTI)

    Templin-Branner, Wilma

    2011-01-01

    The purpose of this training is to familiarize participants with reliable online environmental health and toxicology information, from the National Library of Medicine and other reliable sources. Skills and knowledge acquired in this training class will enable participants to access, utilize, and refer others to environmental health and toxicology information. After completing this course, participants will be able to: (1) Identify quality, accurate, and authoritative online resources pertaining to environmental health, toxicology, and related medical information; (2) Demonstrate the ability to perform strategic search techniques to find relevant online information; and (3) Apply the skills and knowledge obtained in this class to their organization's health information needs. NLMs TOXNET (Toxicology Data Network) is a free, Web-based system of databases on toxicology, environmental health, hazardous chemicals, toxic releases, chemical nomenclatures, and specialty areas such as occupational health and consumer products. Types of information in the TOXNET databases include: (1) Specific chemicals, mixtures, and products; (2) Unknown chemicals; and (3) Special toxic effects of chemicals in humans and/or animals.

  14. European Neutron Activation System.

    Energy Science and Technology Software Center (OSTI)

    2013-01-11

    Version 03 EASY-2010 (European Activation System) consists of a wide range of codes, data and documentation all aimed at satisfying the objective of calculating the response of materials irradiated in a neutron flux. The main difference from the previous version is the upper energy limit, which has increased from 20 to 60 MeV. It is designed to investigate both fusion devices and accelerator based materials test facilities that will act as intense sources of high-energymore » neutrons causing significant activation of the surrounding materials. The very general nature of the calculational method and the data libraries means that it is applicable (with some reservations) to all situations (e.g. fission reactors or neutron sources) where materials are exposed to neutrons below 60 MeV. EASY can be divided into two parts: data and code development tools and user tools and data. The former are required to develop the latter, but EASY users only need to be able to use the inventory code FISPACT and be aware of the contents of the EAF library (the data source). The complete EASY package contains the FISPACT-2007 inventory code, the EAF-2003, EAF-2005, EAF-2007 and EAF-2010 libraries, and the EASY User Interface for the Window version. The activation package EASY-2010 is the result of significant development to extend the upper energy range from 20 to 60 MeV so that it is capable of being used for IFMIF calculations. The EAF-2010 library contains 66,256 reactions, almost five times more than in EAF-2003 (12,617). Deuteron-induced and proton-induced cross section libraries are also included, and can be used with EASY to enable calculations of the activation due to deuterons and proton [2].« less

  15. Solar Glaze Hazard Analysis Tool v. 3.0

    SciTech Connect (OSTI)

    Ho, Clifford K.; Sims, Cianan A.

    2015-08-25

    SGHAT predicts the occurrence and intensity of glare caused by a user-specified solar panel array when viewed from one or more observation points. An interactive mapping interface is used to determine the latitude, longitude and elevation of the array and observation points. The presence and intensity of glare is then calculated along a given time interval throughout the year, based on the position of the sun. The potential ocular hazard is also reported. The maximum energy production of the solar array is also estimated so that alternative designs can be compared to determine the design that yields the most energy production while mitigating glare.

  16. Technology Advancements to Lower Costs of Electrochromic Window Glazing

    SciTech Connect (OSTI)

    Mark Burdis; Neil Sbar

    2008-07-13

    An Electrochromic (EC) Window is a solar control device that can electronically regulate the flow of sunlight and heat. In the case of the SageGlass{reg_sign} EC window, this property derives from a proprietary all-ceramic, intrinsically durable thin-film stack applied to an inner surface of a glass double-pane window. As solar irradiation and temperatures change, the window can be set to an appropriate level of tint to optimize the comfort and productivity of the occupants as well as to minimize building energy usage as a result of HVAC and lighting optimization. The primary goal of this project is to replace certain batch processes for EC thin film deposition resulting in a complete in-line vacuum process that will reduce future capital and labor coats, while increasing throughput and yields. This will require key technology developments to replace the offline processes. This project has enabled development of the next generation of electrochromic devices suitable for large-scale production. Specifically, the requirements to produce large area devices cost effectively require processes amenable to mass production, using a variety of different substrate materials, having minimal handling and capable of being run at high yield. The present SageGlass{reg_sign} production process consists of two vacuum steps separated by an atmospheric process. This means that the glass goes through several additional handling steps, including venting and pumping down to go from vacuum to atmosphere and back, which can only serve to introduce additional defects associated with such processes. The aim of this project therefore was to develop a process which would eliminate the need for the atmospheric process. The overall project was divided into several logical tasks which would result in a process ready to be implemented in the present SAGE facility. Tasks 2 and 3 were devoted to development and the optimization of a new thin film material process. These tasks are more complicated than would be expected, as it has been determined in the past that there are a number of interactions between the new material and the layers beneath, which have an important effect on the behavior of the device. The effects of these interactions needed to be understood in order for this task to be successful. Tasks 4 and 5 were devoted to production of devices using the novel technology developed in the previous tasks. In addition, characterization tests were required to ensure the devices would perform adequately as replacements for the existing technology. Each of these tasks has been achieved successfully. In task 2, a series of potential materials were surveyed, and ranked in order of desirability. Prototype device structures were produced and characterized in order to do this. This satisfied the requirements for Task 2. From the results of this relatively extensive survey, the number of candidate materials was reduced to one or two. Small devices were made in order to test the functionality of such samples, and a series of optimization experiments were carried out with encouraging results. Devices were fabricated, and some room temperature cycling carried out showing that there are no fundamental problems with this technology. This series of achievements satisfied the requirements for Tasks 3 and 4. The results obtained from Task 3 naturally led to scale-up of the process, so a large cathode was obtained and installed in a spare slot in the production coater, and a series of large devices fabricated. In particular, devices with dimensions of 60-inch x 34-inch were produced, using processes which are fully compatible with mass production. Testing followed, satisfying the requirements for Task 5. As can be seen from this discussion, all the requirements of the project have therefore been successfully achieved. The devices produced using the newly developed technology showed excellent optical properties, often exceeding the performance of the existing technology, equivalent durability results, and promise a significantly simplified manufacturing approach, thereby suggesting higher yields as a result of less handling, and therefore lower costs.

  17. Solar Glaze Hazard Analysis Tool v. 3.0

    Energy Science and Technology Software Center (OSTI)

    2015-08-25

    SGHAT predicts the occurrence and intensity of glare caused by a user-specified solar panel array when viewed from one or more observation points. An interactive mapping interface is used to determine the latitude, longitude and elevation of the array and observation points. The presence and intensity of glare is then calculated along a given time interval throughout the year, based on the position of the sun. The potential ocular hazard is also reported. The maximummore » energy production of the solar array is also estimated so that alternative designs can be compared to determine the design that yields the most energy production while mitigating glare.« less

  18. Fourier analysis of conductive heat transfer for glazed roofing...

    Office of Scientific and Technical Information (OSTI)

    Journal Volume: 1605; Journal Issue: 1; Conference: ... sciences education and research towards global ... THEORY; HARMONICS; HEAT; MATERIALS; NATURAL CONVECTION; ...

  19. Transmission/Resource Library/GIS Tools | Open Energy Information

    Open Energy Info (EERE)

    wildlife connectivity areas in Montana. The aim of the mapping system is to consider fish, wildlife, and recreational resources earlier on when planning for future development....

  20. Transmission/Resource Library/Planning | Open Energy Information

    Open Energy Info (EERE)

    public utility transmission providers to meet future electricity demand and maintain reliability of the electric supply system. Transmission providing utilities must undergo...

  1. Towards a More Complete and Accurate Experimental Nuclear Reaction Data Library (EXFOR). International Collaboration Between Nuclear Reaction Data Centres (NRDC)

    SciTech Connect (OSTI)

    Otuka, N.; Pritychenko, B.; Otuka, N.; Dupont, E.; Semkova, V.; Pritychenko, B.; Blokhin, A. I.; Aikawa, M.; Babykina, S.; Bossant, M.; Chen, G.; Dunaeva, S.; Forrest, R. A.; Fukahori, T.; Furutachi, N.; Ganesan, S.; Ge, Z.; Gritzay, O. O.; Herman, M.; Hlavac, S.; Kato, K.; Lalremruata, B.; Lee, Y. O.; Makinaga, A.; Matsumoto, K.; Mikhaylyukova, M.; Pikulina, G.; Pronyaev, V. G.; Saxena, A.; Schwerer, O.; Simakov, S. P.; Soppera, N.; Suzuki, R.; Takacs, S.; Tao, X.; Taova, S.; Tarkanyi, F.; Varlamov, V. V.; Wang, J.; Yang, S. C.; Zerkin, V.; Zhuang, Y.

    2014-06-01

    The International Network of Nuclear Reaction Data Centres (NRDC) coordinated by the IAEA Nuclear Data Section (NDS) successfully collaborates in the maintenance and development of the EXFOR library. Likewise, as the scope of published data expands (e.g. to higher energy, to heavier projectile) to meet the needs of research and applications, it has become a challenging task to maintain both the completeness and accuracy of the EXFOR library. Evolution of the library highlighting recent developments is described.

  2. Towards a More Complete and Accurate Experimental Nuclear Reaction Data Library (EXFOR): International Collaboration Between Nuclear Reaction Data Centres (NRDC)

    SciTech Connect (OSTI)

    Otuka, N.; Dupont, E.; Semkova, V.; Pritychenko, B.; Blokhin, A.I.; Aikawa, M.; Babykina, S.; Bossant, M.; Chen, G.; Dunaeva, S.; Forrest, R.A.; Fukahori, T.; Furutachi, N.; Ganesan, S.; Ge, Z.; Gritzay, O.O.; Herman, M.; Hlavač, S.; and others

    2014-06-15

    The International Network of Nuclear Reaction Data Centres (NRDC) coordinated by the IAEA Nuclear Data Section (NDS) successfully collaborates in the maintenance and development of the EXFOR library. As the scope of published data expands (e.g. to higher energy, to heavier projectile) to meet the needs of research and applications, it has become a challenging task to maintain both the completeness and accuracy of the EXFOR library. Evolution of the library highlighting recent developments is described.

  3. Development of ORIGEN Libraries for Mixed Oxide (MOX) Fuel Assembly Designs

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Mertyurek, Ugur; Gauld, Ian C.

    2015-12-24

    In this research, ORIGEN cross section libraries for reactor-grade mixed oxide (MOX) fuel assembly designs have been developed to provide fast and accurate depletion calculations to predict nuclide inventories, radiation sources and thermal decay heat information needed in safety evaluations and safeguards verification measurements of spent nuclear fuel. These ORIGEN libraries are generated using two-dimensional lattice physics assembly models that include enrichment zoning and cross section data based on ENDF/B-VII.0 evaluations. Using the SCALE depletion sequence, burnup-dependent cross sections are created for selected commercial reactor assembly designs and a representative range of reactor operating conditions, fuel enrichments, and fuel burnup.more » The burnup dependent cross sections are then interpolated to provide problem-dependent cross sections for ORIGEN, avoiding the need for time-consuming lattice physics calculations. The ORIGEN libraries for MOX assembly designs are validated against destructive radiochemical assay measurements of MOX fuel from the MALIBU international experimental program. This program included measurements of MOX fuel from a 15 × 15 pressurized water reactor assembly and a 9 × 9 boiling water reactor assembly. The ORIGEN MOX libraries are also compared against detailed assembly calculations from the Phase IV-B numerical MOX fuel burnup credit benchmark coordinated by the Nuclear Energy Agency within the Organization for Economic Cooperation and Development. Finally, the nuclide compositions calculated by ORIGEN using the MOX libraries are shown to be in good agreement with other physics codes and with experimental data.« less

  4. Development of ORIGEN Libraries for Mixed Oxide (MOX) Fuel Assembly Designs

    SciTech Connect (OSTI)

    Mertyurek, Ugur; Gauld, Ian C.

    2015-12-24

    In this research, ORIGEN cross section libraries for reactor-grade mixed oxide (MOX) fuel assembly designs have been developed to provide fast and accurate depletion calculations to predict nuclide inventories, radiation sources and thermal decay heat information needed in safety evaluations and safeguards verification measurements of spent nuclear fuel. These ORIGEN libraries are generated using two-dimensional lattice physics assembly models that include enrichment zoning and cross section data based on ENDF/B-VII.0 evaluations. Using the SCALE depletion sequence, burnup-dependent cross sections are created for selected commercial reactor assembly designs and a representative range of reactor operating conditions, fuel enrichments, and fuel burnup. The burnup dependent cross sections are then interpolated to provide problem-dependent cross sections for ORIGEN, avoiding the need for time-consuming lattice physics calculations. The ORIGEN libraries for MOX assembly designs are validated against destructive radiochemical assay measurements of MOX fuel from the MALIBU international experimental program. This program included measurements of MOX fuel from a 15 × 15 pressurized water reactor assembly and a 9 × 9 boiling water reactor assembly. The ORIGEN MOX libraries are also compared against detailed assembly calculations from the Phase IV-B numerical MOX fuel burnup credit benchmark coordinated by the Nuclear Energy Agency within the Organization for Economic Cooperation and Development. Finally, the nuclide compositions calculated by ORIGEN using the MOX libraries are shown to be in good agreement with other physics codes and with experimental data.

  5. A new method for predicting the solar heat gain of complex fenestration systems

    SciTech Connect (OSTI)

    Klems, J.H.; Warner, J.L.; Kelley, G.O.

    1995-03-01

    A new method of predicting the solar heat gain through complex fenestration systems involving nonspecular layers such as shades or blinds has been examined in a project jointly sponsored by ASHRAE and DOE. In this method, a scanning radiometer is used to measure the bidirectional radiative transmittance and reflectance of each layer of a fenestration system. The properties of systems containing these layers are then built up computationally from the measured layer properties using a transmission/multiple-reflection calculation. The calculation produces the total directional-hemispherical transmittance of the fenestration system and the layer-by-layer absorbances. These properties are in turn combined with layer-specific measurements of the inward-flowing fractions of absorbed solar energy to produce the overall solar heat gain coefficient. The method has been applied to one of the most optically complex systems in common use, a venetian blind in combination with multiple glazings. A comparison between the scanner-based calculation method and direct system calorimetric measurements made on the LBL MoWiTT facility showed good agreement, and is a significant validation of the method accuracy and feasibility.

  6. Rules of thumb for passive solar heating

    SciTech Connect (OSTI)

    Balcomb, J.D.

    1980-01-01

    Rules of thumb are given for passive solar systems for: (1) sizing solar glazing for 219 cities, (2) sizing thermal storage mass, and (3) building orientation.

  7. The NJOY nuclear data processing system Version 91

    SciTech Connect (OSTI)

    MacFarlane, R.E.; Muir, D.W.

    1994-10-01

    The NJOY nuclear data processing system is a comprehensive computer code package for producing pointwise and multigroup cross sections and related quantities from elevated nuclear data in the ENDF format, including the latest US library, ENDF/B-VI. The NJOY code can work with neutrons, photons, and charged particles, and it can produce libraries for a wide variety of particle transport and reactor analysis codes.

  8. Periodicals collection management using a decision support system

    SciTech Connect (OSTI)

    Compton, M.L.; Moser, E.C.

    1993-12-31

    Sandia National Laboratories is a multiprogram national laboratory established in 1949. The Library currently uses DOBIS for its automated system, including the Periodicals Control function for periodical check-in. DOBIS performs processing and control functions adequately, but could not meet our reporting needs. Therefore the Library`s Periodicals Decision Team decided that they needed another ``system`` for collection management. A Periodicals Decision Support System was created using information downloaded from DOBIS and uploaded into dBASE IV. The Periodical Decision Support System functions as an information-processing system that has aided us in making collection management decisions for periodicals. It certainly allows us to do interactive ad-hoc analysis; although there are no modeling tools currently incorporated in the system. We hope that these modeling tools will come later. We have been gathering information and developing needed reports to achieve this goal.

  9. Intercomparison of nuclear data library sources, group structures and collapsing spectra for INTOR-EC

    SciTech Connect (OSTI)

    Pelloni, S.; Stepanek, J.

    1983-09-01

    The European Community International Tokamak Reactor (INTOR-EC) was used to investigate the influence of different cross-section libraries on the tritium breeding ratio. Nucleonic analyses were performed using the discreteordinates transport codes ANISN and ONEDANT, and the recently developed Swiss surface-flux code SURCU. Nuclear data considered were from the DLC-37, VITAMIN-C (DLC-41), Los AlamosNJOY and MACKLIB-IV fusion libraries. It is shown that very good agreement (within 0.5%) between the breeding ratios obtained using the VITAMIN-C and Los Alamos libraries could be obtained, whereas the corresponding values calculated using VITAMIN-C and MACKLIB-IV data sets collapsed into 25 neutron and 21 gamma groups differ up to 23%.

  10. High-performance, distributed computing software libraries and services

    Energy Science and Technology Software Center (OSTI)

    2002-01-24

    The Globus toolkit provides basic Grid software infrastructure (i.e. middleware), to facilitate the development of applications which securely integrate geographically separated resources, including computers, storage systems, instruments, immersive environments, etc.

  11. A new method for predicting the solar heat gain of complex fenestration systems

    SciTech Connect (OSTI)

    Klems, J.H.; Warner, J.L.

    1992-10-01

    A new method of predicting the solar heat gain through complex fenestration systems involving nonspecular layers such as shades or blinds has been examined in a project jointly sponsored by ASHRAE and DOE. In this method, a scanning radiometer is used to measure the bidirectional radiative transmittance and reflectance of each layer of a fenestration system. The properties of systems containing these layers are then built up computationally from the measured layer properties using a transmission/multiple-reflection calculation. The calculation produces the total directional-hemispherical transmittance of the fenestration system and the layer-by-layer absorptances. These properties are in turn combined with layer-specific measurements of the inward-flowing fractions of absorbed solar energy to produce the overall solar heat gain coefficient. This method has been used to determine the solar heat gain coefficient of a double-glazed window with an interior white shade. The resulting solar heat gain coefficient was compared to a direct measurement of the same system using the Mobile Window Thermal Test (MoWiTT) Facility for measuring window energy performance, and the two results agreed. This represents the first in a series of planned validations and applications of the new method.

  12. Standard Neutron, Photon, and Electron Data Libraries for MCNP4C.

    Energy Science and Technology Software Center (OSTI)

    2004-02-16

    Version 03 US DOE 10CFR810 Jurisdiction. DLC-200/MCNPDATA is for use with Versions 4C and and 4C2 of the MCNP transport code. This data library provides a comprehensive set of cross sections for a wide range of radiation transport applications using the Monte Carlo code package CCC-700/MCNP4C. See Appendix G of the MCNP report LA-13709-M for information on the libraries and how to select specific nuclides for use in MCNP. Newer MCNP cross sections from LANLmore » are included in CCC-710/MCNP5.« less

  13. HIV/AIDS Information Resources from the National Library of Medicine-STOP

    SciTech Connect (OSTI)

    Templin-Branner, W. and N. Dancy

    2010-06-15

    The HIV/AIDS Information Resources from the National Library of Medicine training is designed specifically for the UNCFSP HBCU Screening, Testing, Outreach, and Prevention (STOP) HIV/AIDS Program project members to provide valuable health information resources from the National Library of Medicine and other reliable sources to increase awareness of the wealth of treatment information and educational materials that are available on the Internet and to improve prevention and treatment education for their clients. These resources will also meet the needs of community-based organizations

  14. Automated Feature Generation in Large-Scale Geospatial Libraries for Content-Based Indexing.

    SciTech Connect (OSTI)

    Tobin Jr, Kenneth William; Bhaduri, Budhendra L; Bright, Eddie A; Cheriydat, Anil; Karnowski, Thomas Paul; Palathingal, Paul J; Potok, Thomas E; Price, Jeffery R

    2006-05-01

    We describe a method for indexing and retrieving high-resolution image regions in large geospatial data libraries. An automated feature extraction method is used that generates a unique and specific structural description of each segment of a tessellated input image file. These tessellated regions are then merged into similar groups, or sub-regions, and indexed to provide flexible and varied retrieval in a query-by-example environment. The methods of tessellation, feature extraction, sub-region clustering, indexing, and retrieval are described and demonstrated using a geospatial library representing a 153 km2 region of land in East Tennessee at 0.5 m per pixel resolution.

  15. I INSTRUCTIONS: FROM: Accountability Station Energy Library, AD-622.1/GTN

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    I INSTRUCTIONS: FROM: Accountability Station Energy Library, AD-622.1/GTN U.S. Department of Energy P.O. Box A Germantown, MD 20874 Document Number Copy Series Classi- fication Date Due TO: I have personally received the material identified above and assume full responsibility for its safe handling in accordance with existing regulations. Date Signature Postal Registry No. AD F 1430.1 (11-92) U.S. DEPARTMENT OF ENERGY WASHINGTON, D.C. ENERGY LIBRARY CLASSIFIED RECEIPT NO. T 1. Original of this

  16. A Modified Version of XLACS-II for Processing ENDF Data into Multigroup Neutron Cross Sections in AMPX Master Library Format.

    Energy Science and Technology Software Center (OSTI)

    1982-05-07

    XLACS-IIA calculates fine-group averaged neutron cross sections from ENDF data. Its primary purpose is to produce full range multigroup libraries for the XSDRN-PM program. It also serves this purpose in the AMPX system. Provisions are included for treating fast, resonance, and thermal ENDF/B data. Fine-group energy structures and expansion orders used to represent differential cross sections for XSDRN can be arbitrarily specified by the user. Cross sections can be averaged over an arbitrary user-supplied weightingmore » function or by any of several built-in weighting functions.« less

  17. Assessment of the Financial and Intellectual Value of a Research Library and its Application at the Idaho National Laboratory

    SciTech Connect (OSTI)

    Lynn E. Melander

    2012-08-01

    Over the last several decades, libraries across the nation have undergone dramatic budget cuts, despite being an important resource for regional and national economic growth and innovation. Numerous studies have attempted to show that libraries increase the intellectual level of users and contribute to the economic growth of communities through surveys and customer service data. Within this study, we have attempted to develop a more analytical method for assessing library performance, using the Idaho National Laboratory Research Library as a sample subject. We have developed a mathematical model to measure the financial value of a library’s material resources as well as its intellectual value to determine if the library is a positive contributor to the wider organization and community it serves.

  18. Software Library for Storing and Retrieving Mesh and Results of Finite Element

    Energy Science and Technology Software Center (OSTI)

    1997-07-07

    EXOII is a model developed to store and retrieve data for finite element analyses. It is used for preprocessing (problem definition), postprocessing (results visualization), as well as code to code transfer. An EXOII data file is a random access, machine independent, binary file that is written and read via C, C++, or Fortran library routines which comprise the Application Programming Interface (API).

  19. STARLIB: A NEXT-GENERATION REACTION-RATE LIBRARY FOR NUCLEAR ASTROPHYSICS

    SciTech Connect (OSTI)

    Sallaska, A. L.; Iliadis, C.; Champange, A. E.; Goriely, S.; Starrfield, S.; Timmes, F. X.

    2013-07-15

    STARLIB is a next-generation, all-purpose nuclear reaction-rate library. For the first time, this library provides the rate probability density at all temperature grid points for convenient implementation in models of stellar phenomena. The recommended rate and its associated uncertainties are also included. Currently, uncertainties are absent from all other rate libraries, and, although estimates have been attempted in previous evaluations and compilations, these are generally not based on rigorous statistical definitions. A common standard for deriving uncertainties is clearly warranted. STARLIB represents a first step in addressing this deficiency by providing a tabular, up-to-date database that supplies not only the rate and its uncertainty but also its distribution. Because a majority of rates are lognormally distributed, this allows the construction of rate probability densities from the columns of STARLIB. This structure is based on a recently suggested Monte Carlo method to calculate reaction rates, where uncertainties are rigorously defined. In STARLIB, experimental rates are supplemented with: (1) theoretical TALYS rates for reactions for which no experimental input is available, and (2) laboratory and theoretical weak rates. STARLIB includes all types of reactions of astrophysical interest to Z = 83, such as (p, {gamma}), (p, {alpha}), ({alpha}, n), and corresponding reverse rates. Strong rates account for thermal target excitations. Here, we summarize our Monte Carlo formalism, introduce the library, compare methods of correcting rates for stellar environments, and discuss how to implement our library in Monte Carlo nucleosynthesis studies. We also present a method for accessing STARLIB on the Internet and outline updated Monte Carlo-based rates.

  20. Buildings sector demand-side efficiency technology summaries

    SciTech Connect (OSTI)

    Koomey, J.G.; Johnson, F.X.; Schuman, J.

    1994-03-01

    This report provides descriptions of the following energy efficiency technologies: energy management systems; electronic fluorescent ballasts; compact fluorescent lamps; lighting controls; room air conditioners; high albedo materials, coatings and paints; solar domestic water heaters; heat pump water heaters; energy-efficient motors; adjustable-speed drives; energy-efficient refrigerators; daylight control glazing; insulating glazing; solar control glazing; switchable glazing; tree planting; and advanced insulation. For each technology, the report provides a description of performance characteristics, consumer utility, development status, technology standards, equipment cost, installation, maintenance, conservation programs, and environmental impacts.

  1. Hitting the target: fragment screening with acoustic in situ co-crystallization of proteins plus fragment libraries on pin-mounted data-collection micromeshes

    SciTech Connect (OSTI)

    Yin, Xingyu; Scalia, Alexander; Leroy, Ludmila; Cuttitta, Christina M.; Polizzo, Gina M.; Ericson, Daniel L.; Roessler, Christian G.; Campos, Olven; Ma, Millie Y.; Agarwal, Rakhi; Jackimowicz, Rick; Allaire, Marc; Orville, Allen M.; Sweet, Robert M.; Soares, Alexei S.

    2014-05-01

    A method is presented for screening fragment libraries using acoustic droplet ejection to co-crystallize proteins and chemicals directly on micromeshes with as little as 2.5 nl of each component. This method was used to identify previously unreported fragments that bind to lysozyme, thermolysin, and trypsin. Acoustic droplet ejection (ADE) is a powerful technology that supports crystallographic applications such as growing, improving and manipulating protein crystals. A fragment-screening strategy is described that uses ADE to co-crystallize proteins with fragment libraries directly on MiTeGen MicroMeshes. Co-crystallization trials can be prepared rapidly and economically. The high speed of specimen preparation and the low consumption of fragment and protein allow the use of individual rather than pooled fragments. The Echo 550 liquid-handling instrument (Labcyte Inc., Sunnyvale, California, USA) generates droplets with accurate trajectories, which allows multiple co-crystallization experiments to be discretely positioned on a single data-collection micromesh. This accuracy also allows all components to be transferred through small apertures. Consequently, the crystallization tray is in equilibrium with the reservoir before, during and after the transfer of protein, precipitant and fragment to the micromesh on which crystallization will occur. This strict control of the specimen environment means that the crystallography experiments remain identical as the working volumes are decreased from the few microlitres level to the few nanolitres level. Using this system, lysozyme, thermolysin, trypsin and stachydrine demethylase crystals were co-crystallized with a small 33-compound mini-library to search for fragment hits. This technology pushes towards a much faster, more automated and more flexible strategy for structure-based drug discovery using as little as 2.5 nl of each major component.

  2. Chromosome region-specific libraries for human genome analysis. Final progress report, 1 March 1991--28 February 1994

    SciTech Connect (OSTI)

    Kao, F.T.

    1994-04-01

    The objectives of this grant proposal include (1) development of a chromosome microdissection and PCR-mediated microcloning technology, (2) application of this microtechnology to the construction of region-specific libraries for human genome analysis. During this grant period, the authors have successfully developed this microtechnology and have applied it to the construction of microdissection libraries for the following chromosome regions: a whole chromosome 21 (21E), 2 region-specific libraries for the long arm of chromosome 2, 2q35-q37 (2Q1) and 2q33-q35 (2Q2), and 4 region-specific libraries for the entire short arm of chromosome 2, 2p23-p25 (2P1), 2p21-p23 (2P2), 2p14-p16 (wP3) and 2p11-p13 (2P4). In addition, 20--40 unique sequence microclones have been isolated and characterized for genomic studies. These region-specific libraries and the single-copy microclones from the library have been used as valuable resources for (1) isolating microsatellite probes in linkage analysis to further refine the disease locus; (2) isolating corresponding clones with large inserts, e.g. YAC, BAC, P1, cosmid and phage, to facilitate construction of contigs for high resolution physical mapping; and (3) isolating region-specific cDNA clones for use as candidate genes. These libraries are being deposited in the American Type Culture Collection (ATCC) for general distribution.

  3. SU-E-J-93: Development of Pre-Contoured Human Model Library in DICOM-RT Format for the Epidemiological Study of the Radiotherapy Patients

    SciTech Connect (OSTI)

    Pyakuryal, A; Lee, C; Lee, C; Pelletier, C; Jung, J

    2015-06-15

    Purpose: Prior to 3D conformal radiation therapy planning, patient anatomy information was mostly limited to 2D beams-eye-view from the conventional simulator. To analyze the outcomes of such treatments for radiation late effects, 3D computational human models are often used in commercial treatment planning systems (TPSs). However, several underlying difficulties such as time-consuming manual delineation procedures of a large number of structures in the model have always limited its applications. Primary objective of this work was to develop a human model library for the epidemiological study by converting 3D-surface model organs to DICOM-RT format (DICOM-RT structure) using an in-house built software. We converted the ICRP reference human models to DICOM-RT models, which can be readily adopted for various dose calculations. Methods: MATLAB based code were utilized to convert the contour drawings extracted in text-format from the 3D graphic-tool, Rhinoceros into DICOM-RT structure format for 50 different organs of each model using a 16GB dual-core processor. The conversion periods were measured for each DICOM-RT models, and the reconstructed structure volumes were validated against the original 3D-surface models in the TPS. Ten reference hybrid whole-body models (8-pediatric and 2-adults) were automatically processed to create DICOM-RT computational human model library. Results: Mean contour conversion period was found to be 580 (N=2) and 394.5 (N=8) seconds for 50 organs in the adult and pediatric models respectively. A good agreement for large organs (NRMSD <1.0%) and small organs (NRMSD <7.7%) was also observed between the original volumes and corresponding DICOM-RT structure volumes of the organs. Conclusion: The ICRP reference human models were converted into DICOM-RT format to support the epidemiological study using a large cohort of conventional radiotherapy patients. Due to its DICOM-compatibility, the library may be implemented to many other different

  4. MapReduce MPI library (MR-MPI) v. 1.0

    Energy Science and Technology Software Center (OSTI)

    2009-02-23

    The MapReduce MPI library is a software tool for performing MapReduce operations on a distributed memory parallel computer via message passing (MPI). These are data-processing or computational operations which achieve parallelism by breaking a large task into two stages, a �ƒ¢�‚�€�‚�œmap�ƒ¢�‚�€�‚� and a �ƒ¢�‚�€�‚�œreduce�ƒ¢�‚�€�‚�. Each of these are formulated as simple on-processor functions which the user can easily write. The library assigns independent tasks to processors and performs the parallel data movement and transformations behindmore » the scenes.« less

  5. Application of Gene-Shuffling for the Rapid Generation of Novel [FeFe]-Hydrogenase Libraries

    SciTech Connect (OSTI)

    Nagy, L. E.; Meuser, J. E.; Plummer, S.; Seibert, M.; Ghirardi, M. L.; King, P. W.; Ahmann, D.; Posewitz, M. C.

    2007-01-01

    A gene-shuffling technique was identified, optimized and used to generate diverse libraries of recombinant [FeFe]-hydrogenases. Six native [FeFe]-hydrogenase genes from species of Clostridia were first cloned and separately expressed in Escherichia coli concomitantly with the assembly proteins required for [FeFe]-hydrogenase maturation. All enzymes, with the exception of C. thermocellum HydA, exhibited significant activity when expressed. Single-stranded DNA fragments from genes encoding the two most active [FeFe]-hydrogenases were used to optimize a gene-shuffling protocol and generate recombinant enzyme libraries. Random sampling demonstrates that several shuffled products are active. This represents the first successful application of gene-shuffling using hydrogenases. Moreover, we demonstrate that a single set of [FeFe]-hydrogenase maturation proteins is sufficient for the heterologous assembly of the bioinorganic active site of several native and shuffled [FeFe]-hydrogenases.

  6. SystemBurn

    Energy Science and Technology Software Center (OSTI)

    2012-08-30

    SystemBurn is a tool for creating a synthetic computational load for the purpose of measuring how much power a computer will draw under that type of load. The loads include fundamental library function calls like matrix multiply, memory copies, fourier transforms, bit manipulation, I/O, network packet transfers, and some code contrived to cause the processor to dray more or less power. The code produces some diagnostic and progress output, but the actual measurements would bemore » recorded from the power panels within the computer room.« less

  7. OSTIblog Articles in the National Agriculture Library Topic | OSTI, US Dept

    Office of Scientific and Technical Information (OSTI)

    of Energy Office of Scientific and Technical Information Agriculture Library Topic Eleanor Frierson: A Tribute to the Grande Dame of Government Science Information Partnerships by Dr. Walt Warnick 13 May, 2013 in Personal Perspectives 7446 EFrierson%2872%29.jpg Eleanor Frierson: A Tribute to the Grande Dame of Government Science Information Partnerships Read more about 7446 Eleanor Frierson, who passed away in April 2013, was the grande dame of partnerships to improve public access to

  8. OSTIblog Articles in the National Library of Energy (NLE) - Beta Topic |

    Office of Scientific and Technical Information (OSTI)

    OSTI, US Dept of Energy Office of Scientific and Technical Information Library of Energy (NLE) - Beta Topic DOE Open Government Plan 3.0 Highlights OSTI Products by Peter Lincoln 24 Jun, 2014 in The Department of Energy recently issued its latest Open Government Plan, and the document recognizes the DOE Office of Scientific and Technical Information (OSTI) for advancing open government and the principles of transparency, participation, and collaboration by making scientific and technical

  9. OSTIblog Articles in the World digial Library Topic | OSTI, US Dept of

    Office of Scientific and Technical Information (OSTI)

    Energy Office of Scientific and Technical Information digial Library Topic World Wide Information: The Other Side of the Coin by Kristin Bingham 29 Mar, 2011 in Products and Content Much has been written in this blog about WorldWideScience.org. As regular readers well know, it is a global gateway to scientific and technical databases conceived, developed, and operated by the US Department of Energy's Office of Scientific and Technical Information. WorldWideScience.org accelerates scientific

  10. On the construction of a new stellar classification template library for the LAMOST spectral analysis pipeline

    SciTech Connect (OSTI)

    Wei, Peng; Luo, Ali; Li, Yinbi; Tu, Liangping; Wang, Fengfei; Zhang, Jiannan; Chen, Xiaoyan; Hou, Wen; Kong, Xiao; Wu, Yue; Zuo, Fang; Yi, Zhenping; Zhao, Yongheng; Chen, Jianjun; Du, Bing; Guo, Yanxin; Ren, Juanjuan; Pan, Jingchang; Jiang, Bin; Liu, Jie E-mail: weipeng@nao.cas.cn; and others

    2014-05-01

    The LAMOST spectral analysis pipeline, called the 1D pipeline, aims to classify and measure the spectra observed in the LAMOST survey. Through this pipeline, the observed stellar spectra are classified into different subclasses by matching with template spectra. Consequently, the performance of the stellar classification greatly depends on the quality of the template spectra. In this paper, we construct a new LAMOST stellar spectral classification template library, which is supposed to improve the precision and credibility of the present LAMOST stellar classification. About one million spectra are selected from LAMOST Data Release One to construct the new stellar templates, and they are gathered in 233 groups by two criteria: (1) pseudo g r colors obtained by convolving the LAMOST spectra with the Sloan Digital Sky Survey ugriz filter response curve, and (2) the stellar subclass given by the LAMOST pipeline. In each group, the template spectra are constructed using three steps. (1) Outliers are excluded using the Local Outlier Probabilities algorithm, and then the principal component analysis method is applied to the remaining spectra of each group. About 5% of the one million spectra are ruled out as outliers. (2) All remaining spectra are reconstructed using the first principal components of each group. (3) The weighted average spectrum is used as the template spectrum in each group. Using the previous 3 steps, we initially obtain 216 stellar template spectra. We visually inspect all template spectra, and 29 spectra are abandoned due to low spectral quality. Furthermore, the MK classification for the remaining 187 template spectra is manually determined by comparing with 3 template libraries. Meanwhile, 10 template spectra whose subclass is difficult to determine are abandoned. Finally, we obtain a new template library containing 183 LAMOST template spectra with 61 different MK classes by combining it with the current library.

  11. Caribbean Equal Access Program: HIV/AIDS Information Resources from the National Library of Medicine

    SciTech Connect (OSTI)

    Nancy Dancy, NLM, and Wilma Templin-Branner, ORISE

    2009-01-01

    As the treatment and management of HIV/AIDS continues to evolve with new scientific breakthroughs, treatment discoveries, and management challenges, it is difficult for people living with HIV/AIDS and those who care for them to keep up with the latest information on HIV/AIDS prevention, treatment, and research. The National Library of Medicine, of the National Institutes of Health, has a wealth of health information resources freely available on the Internet to address these needs.

  12. Progress on Nuclear Data Covariances: AFCI-1.2 Covariance Library

    SciTech Connect (OSTI)

    Oblozinsky,P.; Oblozinsky,P.; Mattoon,C.M.; Herman,M.; Mughabghab,S.F.; Pigni,M.T.; Talou,P.; Hale,G.M.; Kahler,A.C.; Kawano,T.; Little,R.C.; Young,P.G

    2009-09-28

    Improved neutron cross section covariances were produced for 110 materials including 12 light nuclei (coolants and moderators), 78 structural materials and fission products, and 20 actinides. Improved covariances were organized into AFCI-1.2 covariance library in 33-energy groups, from 10{sup -5} eV to 19.6 MeV. BNL contributed improved covariance data for the following materials: {sup 23}Na and {sup 55}Mn where more detailed evaluation was done; improvements in major structural materials {sup 52}Cr, {sup 56}Fe and {sup 58}Ni; improved estimates for remaining structural materials and fission products; improved covariances for 14 minor actinides, and estimates of mubar covariances for {sup 23}Na and {sup 56}Fe. LANL contributed improved covariance data for {sup 235}U and {sup 239}Pu including prompt neutron fission spectra and completely new evaluation for {sup 240}Pu. New R-matrix evaluation for {sup 16}O including mubar covariances is under completion. BNL assembled the library and performed basic testing using improved procedures including inspection of uncertainty and correlation plots for each material. The AFCI-1.2 library was released to ANL and INL in August 2009.

  13. Method for high-volume sequencing of nucleic acids: random and directed priming with libraries of oligonucleotides

    DOE Patents [OSTI]

    Studier, F. William

    1995-04-18

    Random and directed priming methods for determining nucleotide sequences by enzymatic sequencing techniques, using libraries of primers of lengths 8, 9 or 10 bases, are disclosed. These methods permit direct sequencing of nucleic acids as large as 45,000 base pairs or larger without the necessity for subcloning. Individual primers are used repeatedly to prime sequence reactions in many different nucleic acid molecules. Libraries containing as few as 10,000 octamers, 14,200 nonamers, or 44,000 decamers would have the capacity to determine the sequence of almost any cosmid DNA. Random priming with a fixed set of primers from a smaller library can also be used to initiate the sequencing of individual nucleic acid molecules, with the sequence being completed by directed priming with primers from the library. In contrast to random cloning techniques, a combined random and directed priming strategy is far more efficient.

  14. RapTOR: Automated sequencing library preparation and suppression for rapid pathogen characterization ( 7th Annual SFAF Meeting, 2012)

    ScienceCinema (OSTI)

    Lane, Todd [SNL

    2013-02-11

    Todd Lane on "RapTOR: Automated sequencing library preparation and suppression for rapid pathogen characterization" at the 2012 Sequencing, Finishing, Analysis in the Future Meeting held June 5-7, 2012 in Santa Fe, New Mexico.

  15. Method for high-volume sequencing of nucleic acids: random and directed priming with libraries of oligonucleotides

    DOE Patents [OSTI]

    Studier, F.W.

    1995-04-18

    Random and directed priming methods for determining nucleotide sequences by enzymatic sequencing techniques, using libraries of primers of lengths 8, 9 or 10 bases, are disclosed. These methods permit direct sequencing of nucleic acids as large as 45,000 base pairs or larger without the necessity for subcloning. Individual primers are used repeatedly to prime sequence reactions in many different nucleic acid molecules. Libraries containing as few as 10,000 octamers, 14,200 nonamers, or 44,000 decamers would have the capacity to determine the sequence of almost any cosmid DNA. Random priming with a fixed set of primers from a smaller library can also be used to initiate the sequencing of individual nucleic acid molecules, with the sequence being completed by directed priming with primers from the library. In contrast to random cloning techniques, a combined random and directed priming strategy is far more efficient. 2 figs.

  16. Tax Deduction Qualified Software TRNSYS version 17.01.0016 TESS Libraries version 17.1.01

    Office of Energy Efficiency and Renewable Energy (EERE)

    provides information about the TRNSYS version 17.01.0016 and TESS Libraries version 17.1.01 qualified computer software, which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings.

  17. Tuning HDF5 for Lustre File Systems

    SciTech Connect (OSTI)

    Howison, Mark; Koziol, Quincey; Knaak, David; Mainzer, John; Shalf, John

    2010-09-24

    HDF5 is a cross-platform parallel I/O library that is used by a wide variety of HPC applications for the flexibility of its hierarchical object-database representation of scientific data. We describe our recent work to optimize the performance of the HDF5 and MPI-IO libraries for the Lustre parallel file system. We selected three different HPC applications to represent the diverse range of I/O requirements, and measured their performance on three different systems to demonstrate the robustness of our optimizations across different file system configurations and to validate our optimization strategy. We demonstrate that the combined optimizations improve HDF5 parallel I/O performance by up to 33 times in some cases running close to the achievable peak performance of the underlying file system and demonstrate scalable performance up to 40,960-way concurrency.

  18. Icing on wind-energy systems

    SciTech Connect (OSTI)

    Hoffer, T.; Reale, T.; Elfiqi, A.

    1981-01-01

    A source of icing data is the network of meteorological recording stations within the continental United States which collect meteorological measurements both at the surface and aloft. This report presents procedures for analyzing this data to determine the maximum possible icing to be expected at specified locations. Since the physical processes are different, the procedures for predicting maximum glaze ice and rime are presented in separate sections. Models developed to simulate the maximum possible ice buildup on an exposed surface using the rainfall and cloud water data as input are also presented. In addition to the maximal dynamic and static icing loads, comparative icing values based on an attempt to simulate actual field conditions are also shown. Included are assumptions of droplet splashing and water drainage for the glaze cases and atmospheric mixing during orographic lifting for rime cases.

  19. FOIA Library

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Outreach Doing Business Expand Doing Business Skip navigation links Newsroom About Us Civil Rights - EEO Freedom of Information Act The Freedom of Information Act Access to...

  20. CETO LIBrary

    Office of Legacy Management (LM)

    Microfich. OCO TELEDVNE ISOTOPES RADIOACTIVITY IN WATER CENTRAL NEVADA TEST AREA BY W. ... Table 7. Central Nevada Test Site Core, Cutting, and Water Sample Locations. * . . . . . . ...

  1. Math Libraries

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Policies User Surveys NERSC Users Group Help Staff Blogs Request Repository Mailing List Need Help? Out-of-hours Status and Password help Call operations: 1-800-66-NERSC, option 1 ...

  2. Baseline Library

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Skip navigation links Marketing Resources Reports, Publications, and Research Agricultural Commercial Consumer Products Industrial Institutional Multi-Sector Residential...

  3. An indices approach for evaluating the performance of fenestration systems in nonresidential buildings

    SciTech Connect (OSTI)

    Sullivan, R.; Arasteh, D.; Papamichael, K.; Kim, J.J.; Johnson, R.; Selkowitz, S.; McCluney, R.

    1987-11-01

    We present results from the first phase of a project to develop a fenestration performance design tool to be used by builders, designers, architects, utility auditors, etc. In phase 1 we defined the design tool concept and the experimental and analytical methodologies required to achieve the project goal. We defined five fenestration performance indices, which when combined with user- specified weighting factors yield a single figure of merit. Three of the indices are related to the effects of fenestration on building energy performance: fuel and electric use and peak electric demand. The other two are related to thermal and visual comfort. We derived index values and correlations to window design parameters by creating a data base consisting of a large number of building energy simulations for a prototypical office building module using the DOE-2 computer simulation program. Four glazing types and two shading devices were combined in several ways so that a representative sampling of realistic fenestration systems was analyzed. 9 refs., 10 figs.

  4. Gamma-Ray Library and Uncertainty Analysis: Passively Emitted Gamma Rays Used in Safeguards Technology

    SciTech Connect (OSTI)

    Parker, W

    2009-09-18

    Non-destructive gamma-ray analysis is a fundamental part of nuclear safeguards, including nuclear energy safeguards technology. Developing safeguards capabilities for nuclear energy will certainly benefit from the advanced use of gamma-ray spectroscopy as well as the ability to model various reactor scenarios. There is currently a wide variety of nuclear data that could be used in computer modeling and gamma-ray spectroscopy analysis. The data can be discrepant (with varying uncertainties), and it may difficult for a modeler or software developer to determine the best nuclear data set for a particular situation. To use gamma-ray spectroscopy to determine the relative isotopic composition of nuclear materials, the gamma-ray energies and the branching ratios or intensities of the gamma-rays emitted from the nuclides in the material must be well known. A variety of computer simulation codes will be used during the development of the nuclear energy safeguards, and, to compare the results of various codes, it will be essential to have all the {gamma}-ray libraries agree. Assessing our nuclear data needs allows us to create a prioritized list of desired measurements, and provides uncertainties for energies and especially for branching intensities. Of interest are actinides, fission products, and activation products, and most particularly mixtures of all of these radioactive isotopes, including mixtures of actinides and other products. Recent work includes the development of new detectors with increased energy resolution, and studies of gamma-rays and their lines used in simulation codes. Because new detectors are being developed, there is an increased need for well known nuclear data for radioactive isotopes of some elements. Safeguards technology should take advantage of all types of gamma-ray detectors, including new super cooled detectors, germanium detectors and cadmium zinc telluride detectors. Mixed isotopes, particularly mixed actinides found in nuclear reactor

  5. POINT 2011: ENDF/B-VII.1 Beta2 Temperature Dependent Cross Section Library

    SciTech Connect (OSTI)

    Cullen, D E

    2011-04-07

    This report is one in the series of 'POINT' reports that over the years have presented temperature dependent cross sections for the then current version of ENDF/B. In each case I have used my personal computer at home and publicly available data and codes. I have used these in combination to produce the temperature dependent cross sections used in applications and presented in this report. I should mention that today anyone with a personal computer can produce these results. The latest ENDF/B-VII.1 beta2 data library was recently and is now freely available through the National Nuclear Data Center (NNDC), Brookhaven National Laboratory. This release completely supersedes all preceding releases of ENDF/B. As distributed the ENDF/B-VII.1 data includes cross sections represented in the form of a combination of resonance parameters and/or tabulated energy dependent cross sections, nominally at 0 Kelvin temperature. For use in our applications the ENDF/B-VII.1 library has been processed into cross sections at eight neutron reactor like temperatures, between 0 and 2100 Kelvin, in steps of 300 Kelvin (the exception being 293.6 Kelvin, for exact room temperature at 20 Celsius). It has also been processed to five astrophysics like temperatures, 1, 10, 100 eV, 1 and 10 keV. For reference purposes, 300 Kelvin is approximately 1/40 eV, so that 1 eV is approximately 12,000 Kelvin. At each temperature the cross sections are tabulated and linearly interpolable in energy. All results are in the computer independent ENDF-6 character format [R2], which allows the data to be easily transported between computers. In its processed form the POINT 2011 library is approximately 16 gigabyte in size and is distributed on one compressed DVDs (see, below for the details of the contents of each DVD).

  6. zorder-lib: Library API for Z-Order Memory Layout

    SciTech Connect (OSTI)

    Nowell, Lucy; Edward W. Bethel

    2015-04-01

    This document describes the motivation for, elements of, and use of the zorder-lib, a library API that implements organization of and access to data in memory using either a-order (also known as "row-major" order) or z-order memory layouts. The primary motivation for this work is to improve the performance of many types of data- intensive codes by increasing both spatial and temporal locality of memory accesses. The basic idea is that the cost associated with accessing a datum is less when it is nearby in either space or time.

  7. Real time method and computer system for identifying radioactive materials from HPGe gamma-ray spectroscopy

    DOE Patents [OSTI]

    Rowland, Mark S.; Howard, Douglas E.; Wong, James L.; Jessup, James L.; Bianchini, Greg M.; Miller, Wayne O.

    2007-10-23

    A real-time method and computer system for identifying radioactive materials which collects gamma count rates from a HPGe gamma-radiation detector to produce a high-resolution gamma-ray energy spectrum. A library of nuclear material definitions ("library definitions") is provided, with each uniquely associated with a nuclide or isotope material and each comprising at least one logic condition associated with a spectral parameter of a gamma-ray energy spectrum. The method determines whether the spectral parameters of said high-resolution gamma-ray energy spectrum satisfy all the logic conditions of any one of the library definitions, and subsequently uniquely identifies the material type as that nuclide or isotope material associated with the satisfied library definition. The method is iteratively repeated to update the spectrum and identification in real time.

  8. Communication library for run-time visualization of distributed, asynchronous data

    SciTech Connect (OSTI)

    Rowlan, J.; Wightman, B.T.

    1994-04-01

    In this paper we present a method for collecting and visualizing data generated by a parallel computational simulation during run time. Data distributed across multiple processes is sent across parallel communication lines to a remote workstation, which sorts and queues the data for visualization. We have implemented our method in a set of tools called PORTAL (for Parallel aRchitecture data-TrAnsfer Library). The tools comprise generic routines for sending data from a parallel program (callable from either C or FORTRAN), a semi-parallel communication scheme currently built upon Unix Sockets, and a real-time connection to the scientific visualization program AVS. Our method is most valuable when used to examine large datasets that can be efficiently generated and do not need to be stored on disk. The PORTAL source libraries, detailed documentation, and a working example can be obtained by anonymous ftp from info.mcs.anl.gov from the file portal.tar.Z from the directory pub/portal.

  9. Improved mixed oxide fuel calculations with the evaluated nuclear data library JEFF-3.2

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Noguere, G.; Bernard, D.; Blaise, P.; Bouland, O.; Leal, Luiz C.; Leconte, P.; Litaize, O.; Peneliau, Y.; Roque, B.; Santamarina, A.; et al

    2016-02-01

    In this study, an overestimation of the keff values for mixed oxide (MOX) fuels was identified with Monte Carlo (TRIPOLI-4) and deterministic (APOLLO2) calculations based on the Joint Evaluated Fission and Fusion (JEFF) evaluated nuclear data library. The overestimation becomes sizeable with Pit aging, reaching a reactivity change of Delta(p)similar or equal to+700 pcm for integral measurements carried out with MOX fuel containing a large amount of americium. This bias was observed for various critical configurations performed in the zero power reactor EOLE of the Commissariat a l'energie atomique et aux energies alternatives (CEA), Cadarache, France. The present work focusesmore » on the improvements achieved with the new 239PU and 241Am evaluated nuclear data files available in the latest version of the JEFF library (JEFF-3.2). The resolved resonance range of the plutonium evaluation was reevaluated at Oak Ridge National Laboratory (ORNL), Oak Ridge, Tennessee, with the Ski/NH code in collaboration with CEA Cadarache. The resonance parameters of the americium evaluation were obtained with the REFIT code in collaboration with the research institutes Institute for Reference Materials and Measurements aRmm, Geel, Belgium, and Institut de recherche sur les lois fondamentales de l'Univers ofio, Saclay, France.« less

  10. Methods for transforming and expression screening of filamentous fungal cells with a DNA library

    DOE Patents [OSTI]

    Teter, Sarah; Lamsa, Michael; Cherry, Joel; Ward, Connie

    2015-06-02

    The present invention relates to methods for expression screening of filamentous fungal transformants, comprising: (a) isolating single colony transformants of a DNA library introduced into E. coli; (b) preparing DNA from each of the single colony E. coli transformants; (c) introducing a sample of each of the DNA preparations of step (b) into separate suspensions of protoplasts of a filamentous fungus to obtain transformants thereof, wherein each transformant contains one or more copies of an individual polynucleotide from the DNA library; (d) growing the individual filamentous fungal transformants of step (c) on selective growth medium, thereby permitting growth of the filamentous fungal transformants, while suppressing growth of untransformed filamentous fungi; and (e) measuring activity or a property of each polypeptide encoded by the individual polynucleotides. The present invention also relates to isolated polynucleotides encoding polypeptides of interest obtained by such methods, to nucleic acid constructs, expression vectors, and recombinant host cells comprising the isolated polynucleotides, and to methods of producing the polypeptides encoded by the isolated polynucleotides.

  11. Criticality Safety Validation of SCALE 6.1 with ENDF/B-VII.0 Libraries

    SciTech Connect (OSTI)

    Marshall, William BJ J; Rearden, Bradley T

    2012-01-01

    ANSI/ANS-8.1-1998;2007, Nuclear Criticality Safety in Operations with Fissionable Material Outside Reactors, and ANSI/ANS-8.24-2007, Validation of Neutron Transport Methods for Nuclear Criticality Safety Calculations, require validation of a computer code and the associated data through benchmark evaluations based on physical experiments. The performance of the code and data are validated by comparing the calculated and the benchmark results. A SCALE procedure has been established to generate a Verified, Archived Library of Inputs and Data (VALID). This procedure provides a framework for preparing, peer reviewing, and controlling models and data sets derived from benchmark definitions so that the models and data can be used with confidence. The procedure ensures that the models and data were correctly generated using appropriate references with documented checks and reviews. Configuration management is implemented to prevent inadvertent modification of the models and data or inclusion of models that have not been subjected to the rigorous review process. VALID entries for criticality safety are based on critical experiments documented in the International Handbook of Evaluated Criticality Safety Benchmark Experiments (IHECSBE). The findings of a criticality safety validation of SCALE 6.1 utilizing the benchmark models vetted in the VALID library at Oak Ridge National Laboratory are summarized here.

  12. 2009.1 Revision of the Evaluated Nuclear Data Library (ENDL2009.1)

    SciTech Connect (OSTI)

    Thompson, I. J.; Beck, B.; Descalles, M. A.; Mattoon, C.; Summers, N. C.

    2015-05-11

    LLNL’s Computational Nuclear Data and Theory Group have created a 2009.1 revised release of the Evaluated Nuclear Data Library (ENDL2009.1). This library is designed to support LLNL’s current and future nuclear data needs and will be employed in nuclear reactor, nuclear security and stockpile stewardship simulations with ASC codes. The ENDL2009 database was the most complete nuclear database for Monte Carlo and deterministic transport of neutrons and charged particles. It was assembled with strong support from the ASC PEM and Attribution programs, leveraged with support from Campaign 4 and the DOE/Office of Science’s US Nuclear Data Program. This document lists the revisions and fixes made in a new release called ENDL2009.1, by comparing with the existing data in the original release which is now called ENDL2009.0. These changes are made in conjunction with the revisions for ENDL2011.1, so that both the .1 releases are as free as possible of known defects.

  13. 2011 Release of the Evaluated Nuclear Data Library (ENDL2011.0)

    SciTech Connect (OSTI)

    Brown, D. A.; Beck, B.; Descalles, M. A.; Escher, J. E.; Hoffman, R.; Mattoon, C. M.; Navratil, P.; Nobre, G. A.; Ormand, W. E.; Summers, N. C.; Thompson, I. J.; Vogt, R.; Barnowski, R.

    2015-05-12

    LLNL’s Computational Nuclear Physics Group and Nuclear Theory and Modeling Group have collaborated to produce the last of three major releases of LLNL’s evaluated nuclear database, ENDL2011. ENDL2011 is designed to support LLNL’s current and future nuclear data needs by providing the best nuclear data available to our programmatic customers. This library contains many new evaluations for radiochemical diagnostics, structural materials, and thermonuclear reactions. We have made an effort to eliminate all holes in reaction networks, allowing in-line isotopic creation and depletion calculations. We have striven to keep ENDL2011 at the leading edge of nuclear data library development by reviewing and incorporating new evaluations as they are made available to the nuclear data community. Finally, this release is our most highly tested release as we have strengthened our already rigorous testing regime by adding tests against IPPE Activation Ratio Measurements, many more new critical assemblies and a more complete set of classified testing (to be detailed separately).

  14. Glass-coating and cleaning system to prevent carbon deposition on coke oven walls

    SciTech Connect (OSTI)

    Takahira, Takuya; Ando, Takeshi; Kasaoka, Shizuki; Yamauchi, Yutaka

    1997-12-31

    The new technology for protecting the coking chamber bricks from damage by hard-pushing is described. The technology consists of the glass coating on the wall bricks and a wall cleaner to blow deposited carbon. For the glass coating, a specially developed glaze is sprayed onto the wall bricks by a spraying device developed to completely spray one coking chamber in a few minutes. The wall cleaner is installed on a pusher ram in the facility to automatically blow air at a sonic speed during coke pushing. The life of the glazed layer is estimated to be over two years.

  15. Solar heating system installed at Troy, Ohio. Final report

    SciTech Connect (OSTI)

    1980-09-01

    This document is the Final Report of the Solar Energy System located at Troy-Miami County Public Library, Troy, Ohio. The completed system is composed of tree basic subsystems: the collector system consisting of 3264 square feet of Owens Illinois evacuated glass tube collectors; the storage system which includes a 5000-gallon insulated steel tank; and the distribution and control system which includes piping, pumping and control logic for the efficient and safe operation of the entire system. This solar heating system was installed in an existing facility and is, therefore, a retrofit system. This report includes extracts from the site files, specifications, drawings, installation, operation and maintenance instructions.

  16. BASIS Set Exchange (BSE): Chemistry Basis Sets from the William R. Wiley Environmental Molecular Sciences Laboratory (EMSL) Basis Set Library

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Feller, D; Schuchardt, Karen L.; Didier, Brett T.; Elsethagen, Todd; Sun, Lisong; Gurumoorthi, Vidhya; Chase, Jared; Li, Jun

    The Basis Set Exchange (BSE) provides a web-based user interface for downloading and uploading Gaussian-type (GTO) basis sets, including effective core potentials (ECPs), from the EMSL Basis Set Library. It provides an improved user interface and capabilities over its predecessor, the EMSL Basis Set Order Form, for exploring the contents of the EMSL Basis Set Library. The popular Basis Set Order Form and underlying Basis Set Library were originally developed by Dr. David Feller and have been available from the EMSL webpages since 1994. BSE not only allows downloading of the more than 200 Basis sets in various formats; it allows users to annotate existing sets and to upload new sets. (Specialized Interface)

  17. BASIS Set Exchange (BSE): Chemistry Basis Sets from the William R. Wiley Environmental Molecular Sciences Laboratory (EMSL) Basis Set Library

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Feller, D; Schuchardt, Karen L.; Didier, Brett T.; Elsethagen, Todd; Sun, Lisong; Gurumoorthi, Vidhya; Chase, Jared; Li, Jun

    The Basis Set Exchange (BSE) provides a web-based user interface for downloading and uploading Gaussian-type (GTO) basis sets, including effective core potentials (ECPs), from the EMSL Basis Set Library. It provides an improved user interface and capabilities over its predecessor, the EMSL Basis Set Order Form, for exploring the contents of the EMSL Basis Set Library. The popular Basis Set Order Form and underlying Basis Set Library were originally developed by Dr. David Feller and have been available from the EMSL webpages since 1994. BSE not only allows downloading of the more than 500 Basis sets in various formats; it allows users to annotate existing sets and to upload new sets. (Specialized Interface)

  18. Modeling, design and thermal performance of a BIPV/T system thermally coupled with a ventilated concrete slab in a low energy solar house: Part 1, BIPV/T system and house energy concept

    SciTech Connect (OSTI)

    Chen, Yuxiang; Athienitis, A.K.; Galal, Khaled

    2010-11-15

    This paper is the first of two papers that describe the modeling, design, and performance assessment based on monitored data of a building-integrated photovoltaic-thermal (BIPV/T) system thermally coupled with a ventilated concrete slab (VCS) in a prefabricated, two-storey detached, low energy solar house. This house, with a design goal of near net-zero annual energy consumption, was constructed in 2007 in Eastman, Quebec, Canada - a cold climate area. Several novel solar technologies are integrated into the house and with passive solar design to reach this goal. An air-based open-loop BIPV/T system produces electricity and collects heat simultaneously. Building-integrated thermal mass is utilized both in passive and active forms. Distributed thermal mass in the direct gain area and relatively large south facing triple-glazed windows (about 9% of floor area) are employed to collect and store passive solar gains. An active thermal energy storage system (TES) stores part of the collected thermal energy from the BIPV/T system, thus reducing the energy consumption of the house ground source heat pump heating system. This paper focuses on the BIPV/T system and the integrated energy concept of the house. Monitored data indicate that the BIPV/T system has a typical efficiency of about 20% for thermal energy collection, and the annual space heating energy consumption of the house is about 5% of the national average. A thermal model of the BIPV/T system suitable for preliminary design and control of the airflow is developed and verified with monitored data. (author)

  19. The status of the Fermilab data storage system

    SciTech Connect (OSTI)

    Bakken, J.; Berman, E.; Huang, Chi-Hao; Moibenko, A.; Petravick, D.; Zalokar, M.; /Fermilab

    2004-12-01

    This document describes the Fermilab Data Storage System Enstore, its design concepts, structure, and current status. Enstore provides storage of the data in robotic tape libraries according to requirements of the experiments. High fault tolerance and availability, as well as multilevel priority based request processing allows experiments to effectively store and access data in the Enstore. Amount of data stored in the system currently approaches 2 PBytes. The Enstore system includes 5 robotic tape libraries, more than 100 PC nodes, and 90 tape drives. The distributed structure and modularity of Enstore allows scaling of the system and adding of more storage equipment as the requirements and needs grow. Users access data in Enstore directly using a special command. They can also use ftp, GridFtp, and SRM interfaces to the dCache caching and buffering system [1], which uses Enstore as its lower layer storage.

  20. ENDF/B-VII.1 Beta4 Temperature Dependent Cross Section Library.

    Energy Science and Technology Software Center (OSTI)

    2011-11-13

    Version 01 As distributed, the ENDF/B-VII.1 data includes cross sections represented in the form of a combination of resonance parameters and/or tabulated energy dependent cross sections, nominally at 0 Kelvin temperature. For use in applications the ENDF/B-VII.1 library has been processed into the form of temperature dependent cross sections at eight neutron reactor like temperatures, between 0 and 2100 Kelvin, in steps of 300 Kelvin (the exception being 293.6 Kelvin, for exact room temperature atmore » 20 Celsius). It has also been processed to five astrophysics like temperatures—1, 10, and 100 eV; and 1 and 10 keV. For reference purposes, 300 Kelvin is approximately 1/40 eV, so that 1 eV is approximately 12,000 Kelvin. At each temperature the cross sections are tabulated and linearly interpolable in energy.« less

  1. The Pacific Northwest National Laboratory library of bacterial and archaeal proteomic biodiversity

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Payne, Samuel H.; Monroe, Matthew E.; Overall, Christopher C.; Kiebel, Gary R.; Degan, Michael G.; Gibbons, Bryson C.; Fujimoto, Grant M.; Purvine, Samuel O.; Adkins, Joshua N.; Lipton, Mary S.; et al

    2015-08-18

    This dataset deposition announces the submission to public repositories of the PNNL Biodiversity Library, a large collection of global proteomics data for 112 bacterial and archaeal organisms. The data comprises 35,162 tandem mass spectrometry (MS/MS) datasets from ~10 years of research. All data has been searched, annotated and organized in a consistent manner to promote reuse by the community. Protein identifications were cross-referenced with KEGG functional annotations which allows for pathway oriented investigation. We present the data as a freely available community resource. A variety of data re-use options are described for computational modeling, proteomics assay design and bioengineering. Instrumentmore » data and analysis files are available at ProteomeXchange via the MassIVE partner repository under the identifiers PXD001860 and MSV000079053.« less

  2. The Pacific Northwest National Laboratory library of bacterial and archaeal proteomic biodiversity

    SciTech Connect (OSTI)

    Payne, Samuel H.; Monroe, Matthew E.; Overall, Christopher C.; Kiebel, Gary R.; Degan, Michael G.; Gibbons, Bryson C.; Fujimoto, Grant M.; Purvine, Samuel O.; Adkins, Joshua N.; Lipton, Mary S.; Smith, Richard D.

    2015-08-18

    This dataset deposition announces the submission to public repositories of the PNNL Biodiversity Library, a large collection of global proteomics data for 112 bacterial and archaeal organisms. The data comprises 35,162 tandem mass spectrometry (MS/MS) datasets from ~10 years of research. All data has been searched, annotated and organized in a consistent manner to promote reuse by the community. Protein identifications were cross-referenced with KEGG functional annotations which allows for pathway oriented investigation. We present the data as a freely available community resource. A variety of data re-use options are described for computational modeling, proteomics assay design and bioengineering. Instrument data and analysis files are available at ProteomeXchange via the MassIVE partner repository under the identifiers PXD001860 and MSV000079053.

  3. SimTrack: A compact c++ library for particle orbit and spin tracking in accelerators

    SciTech Connect (OSTI)

    Luo, Yun

    2015-06-24

    SimTrack is a compact c++ library of 6-d symplectic element-by-element particle tracking in accelerators originally designed for head-on beam-beam compensation simulation studies in the Relativistic Heavy Ion Collider (RHIC) at Brookhaven National Laboratory. It provides a 6-d symplectic orbit tracking with the 4th order symplectic integration for magnet elements and the 6-d symplectic synchro-beam map for beam-beam interaction. Since its inception in 2009, SimTrack has been intensively used for dynamic aperture calculations with beam-beam interaction for RHIC. Recently, proton spin tracking and electron energy loss due to synchrotron radiation were added. In this article, I will present the code architecture, physics models, and some selected examples of its applications to RHIC and a future electron-ion collider design eRHIC.

  4. POINT 2015: ENDF/B-VII.1 Final Temperature Dependent Cross Section Library

    Energy Science and Technology Software Center (OSTI)

    2015-06-01

    Version 00 For use in applications the ENDF/B-VII.1 library has been processed into the form of temperature dependent cross sections at eight neutron reactor like temperatures, between 0 K and 2100 K, in steps of 300 K (the exception being 293.6 K, for exact room temperature at 20 Celsius). It has also been processed to five astrophysics like temperatures—1, 10, and 100 eV; and 1 and 10 keV. For reference purposes, 300 K is approximatelymore » 1/40 eV, so that 1 eV is approximately 12,000 K. At each temperature the cross sections are tabulated and linearly interpolable in energy.« less

  5. ENDF/B-VII.1 Beta4 Temperature Dependent Cross Section Library.

    Energy Science and Technology Software Center (OSTI)

    2011-07-22

    Version 00 As distributed, the ENDF/B-VII.1 data includes cross sections represented in the form of a combination of resonance parameters and/or tabulated energy dependent cross sections, nominally at 0 Kelvin temperature. For use in applications the ENDF/B-VII.1 library has been processed into the form of temperature dependent cross sections at eight neutron reactor like temperatures, between 0 and 2100 Kelvin, in steps of 300 Kelvin (the exception being 293.6 Kelvin, for exact room temperature atmore » 20 Celsius). It has also been processed to five astrophysics like temperatures—1, 10, and 100 eV; and 1 and 10 keV. For reference purposes, 300 Kelvin is approximately 1/40 eV, so that 1 eV is approximately 12,000 Kelvin. At each temperature the cross sections are tabulated and linearly interpolable in energy.« less

  6. Efficient and simpler method to construct normalized cDNA libraries with improved representations of full-length cDNAs

    DOE Patents [OSTI]

    Soares, Marcelo Bento; Bonaldo, Maria de Fatima

    1998-01-01

    This invention provides a method to normalize a cDNA library comprising: (a) constructing a directionally cloned library containing cDNA inserts wherein the insert is capable of being amplified by polymerase chain reaction; (b) converting a double-stranded cDNA library into single-stranded DNA circles; (c) generating single-stranded nucleic acid molecules complementary to the single-stranded DNA circles converted in step (b) by polymerase chain reaction with appropriate primers; (d) hybridizing the single-stranded DNA circles converted in step (b) with the complementary single-stranded nucleic acid molecules generated in step (c) to produce partial duplexes to an appropriate Cot; and (e) separating the unhybridized single-stranded DNA circles from the hybridized DNA circles, thereby generating a normalized cDNA library. This invention also provides a method to normalize a cDNA library wherein the generating of single-stranded nucleic acid molecules complementary to the single-stranded DNA circles converted in step (b) is by excising cDNA inserts from the double-stranded cDNA library; purifying the cDNA inserts from cloning vectors; and digesting the cDNA inserts with an exonuclease. This invention further provides a method to construct a subtractive cDNA library following the steps described above. This invention further provides normalized and/or subtractive cDNA libraries generated by the above methods.

  7. Efficient and simpler method to construct normalized cDNA libraries with improved representations of full-length cDNAs

    DOE Patents [OSTI]

    Soares, M.B.; Fatima Bonaldo, M. de

    1998-12-08

    This invention provides a method to normalize a cDNA library comprising: (a) constructing a directionally cloned library containing cDNA inserts wherein the insert is capable of being amplified by polymerase chain reaction; (b) converting a double-stranded cDNA library into single-stranded DNA circles; (c) generating single-stranded nucleic acid molecules complementary to the single-stranded DNA circles converted in step (b) by polymerase chain reaction with appropriate primers; (d) hybridizing the single-stranded DNA circles converted in step (b) with the complementary single-stranded nucleic acid molecules generated in step (c) to produce partial duplexes to an appropriate Cot; and (e) separating the unhybridized single-stranded DNA circles from the hybridized DNA circles, thereby generating a normalized cDNA library. This invention also provides a method to normalize a cDNA library wherein the generating of single-stranded nucleic acid molecules complementary to the single-stranded DNA circles converted in step (b) is by excising cDNA inserts from the double-stranded cDNA library; purifying the cDNA inserts from cloning vectors; and digesting the cDNA inserts with an exonuclease. This invention further provides a method to construct a subtractive cDNA library following the steps described above. This invention further provides normalized and/or subtractive cDNA libraries generated by the above methods. 25 figs.

  8. ANSL-V: ENDF/B-V based multigroup cross-section libraries for Advanced Neutron Source (ANS) reactor studies. Supplement 1

    SciTech Connect (OSTI)

    Wright, R.Q.; Renier, J.P.; Bucholz, J.A.

    1995-08-01

    The original ANSL-V cross-section libraries (ORNL-6618) were developed over a period of several years for the physics analysis of the ANS reactor, with little thought toward including the materials commonly needed for shielding applications. Materials commonly used for shielding applications include calcium barium, sulfur, phosphorous, and bismuth. These materials, as well as {sup 6}Li, {sup 7}Li, and the naturally occurring isotopes of hafnium, have been added to the ANSL-V libraries. The gamma-ray production and gamma-ray interaction cross sections were completely regenerated for the ANSL-V 99n/44g library which did not exist previously. The MALOCS module was used to collapse the 99n/44g coupled library to the 39n/44g broad- group library. COMET was used to renormalize the two-dimensional (2- D) neutron matrix sums to agree with the one-dimensional (1-D) averaged values. The FRESH module was used to adjust the thermal scattering matrices on the 99n/44g and 39n/44g ANSL-V libraries. PERFUME was used to correct the original XLACS Legendre polynomial fits to produce acceptable distributions. The final ANSL-V 99n/44g and 39n/44g cross-section libraries were both checked by running RADE. The AIM module was used to convert the master cross-section libraries from binary coded decimal to binary format (or vice versa).

  9. Toward an Integrated BAC Library Resource for Genome Sequencing and Analysis

    SciTech Connect (OSTI)

    Simon, M. I.; Kim, U.-J.

    2002-02-26

    We developed a great deal of expertise in building large BAC libraries from a variety of DNA sources including humans, mice, corn, microorganisms, worms, and Arabidopsis. We greatly improved the technology for screening these libraries rapidly and for selecting appropriate BACs and mapping BACs to develop large overlapping contigs. We became involved in supplying BACs and BAC contigs to a variety of sequencing and mapping projects and we began to collaborate with Drs. Adams and Venter at TIGR and with Dr. Leroy Hood and his group at University of Washington to provide BACs for end sequencing and for mapping and sequencing of large fragments of chromosome 16. Together with Dr. Ian Dunham and his co-workers at the Sanger Center we completed the mapping and they completed the sequencing of the first human chromosome, chromosome 22. This was published in Nature in 1999 and our BAC contigs made a major contribution to this sequencing effort. Drs. Shizuya and Ding invented an automated highly accurate BAC mapping technique. We also developed long-term collaborations with Dr. Uli Weier at UCSF in the design of BAC probes for characterization of human tumors and specific chromosome deletions and breakpoints. Finally the contribution of our work to the human genome project has been recognized in the publication both by the international consortium and the NIH of a draft sequence of the human genome in Nature last year. Dr. Shizuya was acknowledged in the authorship of that landmark paper. Dr. Simon was also an author on the Venter/Adams Celera project sequencing the human genome that was published in Science last year.

  10. High-throughput characterization of stresses in thin film materials libraries using Si cantilever array wafers and digital holographic microscopy

    SciTech Connect (OSTI)

    Lai, Y. W.; Ludwig, A.; Hamann, S.; Ehmann, M.

    2011-06-15

    We report the development of an advanced high-throughput stress characterization method for thin film materials libraries sputter-deposited on micro-machined cantilever arrays consisting of around 1500 cantilevers on 4-inch silicon-on-insulator wafers. A low-cost custom-designed digital holographic microscope (DHM) is employed to simultaneously monitor the thin film thickness, the surface topography and the curvature of each of the cantilevers before and after deposition. The variation in stress state across the thin film materials library is then calculated by Stoney's equation based on the obtained radii of curvature of the cantilevers and film thicknesses. DHM with nanometer-scale out-of-plane resolution allows stress measurements in a wide range, at least from several MPa to several GPa. By using an automatic x-y translation stage, the local stresses within a 4-inch materials library are mapped with high accuracy within 10 min. The speed of measurement is greatly improved compared with the prior laser scanning approach that needs more than an hour of measuring time. A high-throughput stress measurement of an as-deposited Fe-Pd-W materials library was evaluated for demonstration. The fast characterization method is expected to accelerate the development of (functional) thin films, e.g., (magnetic) shape memory materials, whose functionality is greatly stress dependent.

  11. Easy system call tracing for Plan 9.

    SciTech Connect (OSTI)

    Minnich, Ronald G.

    2010-09-01

    Tracing system calls makes debugging easy and fast. On Plan 9, traditionally, system call tracing has been implemented with acid. New systems do not always implement all the capabilities needed for Acid, particularly the ability to rewrite the process code space to insert breakpoints. Architecture support libraries are not always available for Acid, or may not work even on a supported architecture. The requirement that Acid's libraries be available can be a problem on systems with a very small memory footprint, such as High Performance Computing systems where every Kbyte counts. Finally, Acid tracing is inconvenient in the presence of forks, which means tracing shell pipelines is particularly troublesome. The strace program available on most Unix systems is far more convenient to use and more capable than Acid for system call tracing. A similar system on Plan 9 can simplify troubleshooting. We have built a system calling tracing capability into the Plan 9 kernel. It has proven to be more convenient than strace in programming effort. One can write a shell script to implement tracing, and the C code to implement an strace equivalent is several orders of magnitude smaller.

  12. XCPU2 process management system

    SciTech Connect (OSTI)

    Ionkov, Latchesar; Van Hensbergen, Eric

    2009-01-01

    Xcpu2 is a new process management system that allows the users to specify custom file system for a running job. Most cluster management systems enforce single software distribution running on all nodes. Xcpu2 allows programs running on the cluster to work in environment identical to the user's desktop, using the same versions of the libraries and tools the user installed locally, and accessing the configuration file in the same places they are located on the desktop. Xcpu2 builds on our earlier work with the Xcpu system. Like Xcpu, Xcpu2's process management interface is represented as a set of files exported by a 9P file server. It supports heterogeneous clusters and multiple head nodes. Unlike Xcpu, it uses pull instead of push model. In this paper we describe the Xcpu2 clustering model, its operation and how the per-job filesystem configuration can be used to solve some of the common problems when running a cluster.

  13. Specifications for the development of BUGLE-93: An ENDF/B-VI multigroup cross section library for LWR shielding and pressure vessel dosimetry

    SciTech Connect (OSTI)

    White, J.E.; Wright, R.Q.; Roussin, R.W.; Ingersoll, D.T.

    1992-11-01

    This report discusses specifications which have been developed for a new multigroup cross section library based on ENDF/B-VI data for light water reactor shielding and reactor pressure vessel dosimetry applications. The resulting broad-group library and an intermediate fine-group library are defined by the specifications provided in this report. Processing ENDF/B-VI into multigroup format for use in radiation transport codes will provide radiation shielding analysts with the most currently available nuclear data. it is expected that the general nature of the specifications will be useful in other applications such as reactor physics.

  14. Integrated risk information system (IRIS)

    SciTech Connect (OSTI)

    Tuxen, L.

    1990-12-31

    The Integrated Risk Information System (IRIS) is an electronic information system developed by the US Environmental Protection Agency (EPA) containing information related to health risk assessment. IRIS is the Agency`s primary vehicle for communication of chronic health hazard information that represents Agency consensus following comprehensive review by intra-Agency work groups. The original purpose for developing IRIS was to provide guidance to EPA personnel in making risk management decisions. This original purpose for developing IRIS was to guidance to EPA personnel in making risk management decisions. This role has expanded and evolved with wider access and use of the system. IRIS contains chemical-specific information in summary format for approximately 500 chemicals. IRIS is available to the general public on the National Library of Medicine`s Toxicology Data Network (TOXNET) and on diskettes through the National Technical Information Service (NTIS).

  15. Engineering on-chip nanoporous gold material libraries via precision photothermal treatment [Precision Photothermal Annealing of Nanoporous Gold Thin Films for the Microfabrication of a Single-ship Material Libraries

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Chapman, Christopher A. R.; Wang, Ling; Biener, Juergen; Seker, Erkin; Biener, Monika M.; Matthews, Manyalibo J.

    2016-01-01

    Single-chip material libraries of thin films of nanostructured materials are a promising approach for high throughput studies of structure-property relationship in the fields of physics and biology. Nanoporous gold (np-Au), produced by an alloy corrosion process, is a nanostructured material of specific interest in both these fields. One attractive property of np-Au is its self-similar coarsening behavior by thermally induced surface diffusion. However, traditional heat application techniques for the modification of np-Au are bulk processes that cannot be used to generate a library of different pore sizes on a single chip. Laser micromachining offers an attractive solution to this problemmore » by providing a means to apply energy with high spatial and temporal resolution. In our present study we use finite element multiphysics simulations to predict the effects of laser mode (continuous-wave vs. pulsed) and supporting substrate thermal conductivity on the local np-Au film temperatures during photothermal annealing and subsequently investigate the mechanisms by which the np-Au network is coarsening. Our simulations predict that continuous-wave mode laser irradiation on a silicon supporting substrate supports the widest range of morphologies that can be created through the photothermal annealing of thin film np-Au. Using this result we successfully fabricate a single-chip material library consisting of 81 np-Au samples of 9 different morphologies for use in increased throughput material interaction studies.« less

  16. Engineering on-chip nanoporous gold material libraries via precision photothermal treatment [Precision Photothermal Annealing of Nanoporous Gold Thin Films for the Microfabrication of a Single-ship Material Libraries

    SciTech Connect (OSTI)

    Chapman, Christopher A. R.; Wang, Ling; Biener, Juergen; Seker, Erkin; Biener, Monika M.; Matthews, Manyalibo J.

    2016-01-01

    Single-chip material libraries of thin films of nanostructured materials are a promising approach for high throughput studies of structure-property relationship in the fields of physics and biology. Nanoporous gold (np-Au), produced by an alloy corrosion process, is a nanostructured material of specific interest in both these fields. One attractive property of np-Au is its self-similar coarsening behavior by thermally induced surface diffusion. However, traditional heat application techniques for the modification of np-Au are bulk processes that cannot be used to generate a library of different pore sizes on a single chip. Laser micromachining offers an attractive solution to this problem by providing a means to apply energy with high spatial and temporal resolution. In our present study we use finite element multiphysics simulations to predict the effects of laser mode (continuous-wave vs. pulsed) and supporting substrate thermal conductivity on the local np-Au film temperatures during photothermal annealing and subsequently investigate the mechanisms by which the np-Au network is coarsening. Our simulations predict that continuous-wave mode laser irradiation on a silicon supporting substrate supports the widest range of morphologies that can be created through the photothermal annealing of thin film np-Au. Using this result we successfully fabricate a single-chip material library consisting of 81 np-Au samples of 9 different morphologies for use in increased throughput material interaction studies.

  17. Precision Photothermal Annealing of Nanoporous Gold Thin Films for the Microfabrication of a Single-chip Material Libraries

    SciTech Connect (OSTI)

    Harris, C. D.; Shen, N.; Rubenchik, A.; Demos, S. G.; Matthews, M. J.

    2015-06-30

    Single-chip material libraries of thin films of nanostructured materials are a promising approach for high throughput studies of structure-property relationship in the fields of physics and biology. Nanoporous gold (np-Au), produced by an alloy corrosion process, is a nanostructured material of specific interest in both these fields. One attractive property of np-Au is its self-similar coarsening behavior by thermally induced surface diffusion. However, traditional heat application techniques for the modification of np-Au are bulk processes that cannot be used to generate a library of different pore sizes on a single chip. Laser micromachining offers an attractive solution to this problem by providing a means to apply energy with high spatial and temporal resolution. In the present study we use finite element multiphysics simulations to predict the effects of laser mode (continuous-wave vs. pulsed) and supporting substrate thermal conductivity on the local np-Au film temperatures during photothermal annealing and subsequently investigate the mechanisms by which the np-Au network is coarsening. Our simulations predict that continuous-wave mode laser irradiation on a silicon supporting substrate supports the widest range of morphologies that can be created through the photothermal annealing of thin film np-Au. Using this result we successfully fabricate a single-chip material library consisting of 81 np-Au samples of 9 different morphologies for use in increased throughput material interaction studies.

  18. Active Storage with Analytics Capabilities and I/O Runtime System for Petascale Systems

    SciTech Connect (OSTI)

    Choudhary, Alok

    2015-03-18

    Computational scientists must understand results from experimental, observational and computational simulation generated data to gain insights and perform knowledge discovery. As systems approach the petascale range, problems that were unimaginable a few years ago are within reach. With the increasing volume and complexity of data produced by ultra-scale simulations and high-throughput experiments, understanding the science is largely hampered by the lack of comprehensive I/O, storage, acceleration of data manipulation, analysis, and mining tools. Scientists require techniques, tools and infrastructure to facilitate better understanding of their data, in particular the ability to effectively perform complex data analysis, statistical analysis and knowledge discovery. The goal of this work is to enable more effective analysis of scientific datasets through the integration of enhancements in the I/O stack, from active storage support at the file system layer to MPI-IO and high-level I/O library layers. We propose to provide software components to accelerate data analytics, mining, I/O, and knowledge discovery for large-scale scientific applications, thereby increasing productivity of both scientists and the systems. Our approaches include 1) design the interfaces in high-level I/O libraries, such as parallel netCDF, for applications to activate data mining operations at the lower I/O layers; 2) Enhance MPI-IO runtime systems to incorporate the functionality developed as a part of the runtime system design; 3) Develop parallel data mining programs as part of runtime library for server-side file system in PVFS file system; and 4) Prototype an active storage cluster, which will utilize multicore CPUs, GPUs, and FPGAs to carry out the data mining workload.

  19. A combinatorial histidine scanning library approach to engineer highly pH-dependent protein switches

    SciTech Connect (OSTI)

    Murtaugh, Megan L.; Fanning, Sean W.; Sharma, Tressa M.; Terry, Alexandra M.; Horn, James R.

    2012-09-05

    There is growing interest in the development of protein switches, which are proteins whose function, such as binding a target molecule, can be modulated through environmental triggers. Efforts to engineer highly pH sensitive protein-protein interactions typically rely on the rational introduction of ionizable groups in the protein interface. Such experiments are typically time intensive and often sacrifice the protein's affinity at the permissive pH. The underlying thermodynamics of proton-linkage dictate that the presence of multiple ionizable groups, which undergo a pK{sub a} change on protein binding, are necessary to result in highly pH-dependent binding. To test this hypothesis, a novel combinatorial histidine library was developed where every possible combination of histidine and wild-type residue is sampled throughout the interface of a model anti-RNase A single domain VHH antibody. Antibodies were coselected for high-affinity binding and pH-sensitivity using an in vitro, dual-function selection strategy. The resulting antibodies retained near wild-type affinity yet became highly sensitive to small decreases in pH, drastically decreasing their binding affinity, due to the incorporation of multiple histidine groups. Several trends were observed, such as histidine 'hot-spots,' which will help enhance the development of pH switch proteins as well as increase our understanding of the role of ionizable residues in protein interfaces. Overall, the combinatorial approach is rapid, general, and robust and should be capable of producing highly pH-sensitive protein affinity reagents for a number of different applications.

  20. Wavelet subband coding of computer simulation output using the A++ array class library

    SciTech Connect (OSTI)

    Bradley, J.N.; Brislawn, C.M.; Quinlan, D.J.; Zhang, H.D.; Nuri, V.

    1995-07-01

    The goal of the project is to produce utility software for off-line compression of existing data and library code that can be called from a simulation program for on-line compression of data dumps as the simulation proceeds. Naturally, we would like the amount of CPU time required by the compression algorithm to be small in comparison to the requirements of typical simulation codes. We also want the algorithm to accomodate a wide variety of smooth, multidimensional data types. For these reasons, the subband vector quantization (VQ) approach employed in has been replaced by a scalar quantization (SQ) strategy using a bank of almost-uniform scalar subband quantizers in a scheme similar to that used in the FBI fingerprint image compression standard. This eliminates the considerable computational burdens of training VQ codebooks for each new type of data and performing nearest-vector searches to encode the data. The comparison of subband VQ and SQ algorithms in indicated that, in practice, there is relatively little additional gain from using vector as opposed to scalar quantization on DWT subbands, even when the source imagery is from a very homogeneous population, and our subjective experience with synthetic computer-generated data supports this stance. It appears that a careful study is needed of the tradeoffs involved in selecting scalar vs. vector subband quantization, but such an analysis is beyond the scope of this paper. Our present work is focused on the problem of generating wavelet transform/scalar quantization (WSQ) implementations that can be ported easily between different hardware environments. This is an extremely important consideration given the great profusion of different high-performance computing architectures available, the high cost associated with learning how to map algorithms effectively onto a new architecture, and the rapid rate of evolution in the world of high-performance computing.