National Library of Energy BETA

Sample records for gis software purpose

  1. CyberGIS software: a synthetic review and integration roadmap

    SciTech Connect (OSTI)

    Wang, Shaowen; Anselin, Luc; Bhaduri, Budhendra L; Cosby, Christopher; Goodchild, Michael; Liu, Yan; Nygers, Timothy L.

    2013-01-01

    CyberGIS defined as cyberinfrastructure-based geographic information systems (GIS) has emerged as a new generation of GIS representing an important research direction for both cyberinfrastructure and geographic information science. This study introduces a 5-year effort funded by the US National Science Foundation to advance the science and applications of CyberGIS, particularly for enabling the analysis of big spatial data, computationally intensive spatial analysis and modeling (SAM), and collaborative geospatial problem-solving and decision-making, simultaneously conducted by a large number of users. Several fundamental research questions are raised and addressed while a set of CyberGIS challenges and opportunities are identified from scientific perspectives. The study reviews several key CyberGIS software tools that are used to elucidate a vision and roadmap for CyberGIS software research. The roadmap focuses on software integration and synthesis of cyberinfrastructure, GIS, and SAM by defining several key integration dimensions and strategies. CyberGIS, based on this holistic integration roadmap, exhibits the following key characteristics: high-performance and scalable, open and distributed, collaborative, service-oriented, user-centric, and community-driven. As a major result of the roadmap, two key CyberGIS modalities gateway and toolkit combined with a community-driven and participatory approach have laid a solid foundation to achieve scientific breakthroughs across many geospatial communities that would be otherwise impossible.

  2. Integrated: Geospatial Toolkit GIS data for Nicaragua from NREL...

    Open Energy Info (EERE)

    Nicaragua from NREL (Abstract): Geographic Information Systems (GIS) data intended for use in the Geospatial toolkit or with any GIS software. (Purpose): The Solar and Wind Energy...

  3. Integrated: Geospatial Toolkit GIS data for Cuba from NREL -...

    Open Energy Info (EERE)

    Cuba from NREL (Abstract): Geographic Information Systems (GIS) data intended for use in the Geospatial toolkit or with any GIS software. (Purpose): The Solar and Wind Energy...

  4. Software requirements specification for the GIS-T/ISTEA pooled fund study phase C linear referencing engine

    SciTech Connect (OSTI)

    Amai, W.; Espinoza, J. Jr.; Fletcher, D.R.

    1997-06-01

    This Software Requirements Specification (SRS) describes the features to be provided by the software for the GIS-T/ISTEA Pooled Fund Study Phase C Linear Referencing Engine project. This document conforms to the recommendations of IEEE Standard 830-1984, IEEE Guide to Software Requirements Specification (Institute of Electrical and Electronics Engineers, Inc., 1984). The software specified in this SRS is a proof-of-concept implementation of the Linear Referencing Engine as described in the GIS-T/ISTEA pooled Fund Study Phase B Summary, specifically Sheet 13 of the Phase B object model. The software allows an operator to convert between two linear referencing methods and a datum network.

  5. ug[SCIP,*] Library : A Software Library for General Purpose Parallel...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ugSCIP,* Library : A Software Library for General Purpose Parallel Branch-and-Bound ... ugSCIP,* library is a software library to parallelize customized SCIP solvers. ...

  6. Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Transportation Energy/Predictive Simulation of Engines/Reacting Flow/Applied Math & Software/Software Software admin 2015-10-30T02:00:39+00:00 The studies of mathematical methods and algorithms needed to computationally model reacting flows have in some instances involved the development of codes serving this and related purposes. Links to descriptions of these codes, some of which are available by download or other means, are provided here, along with brief explanations. A flexible

  7. Purpose

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Purpose Determine which objects are attracted to a magnet. Performing the experiment 1. Touch the magnet to each object. Which objects or which portions of objects are attracted to the magnet? 2. See if you can attract the paper clip to one end of the magnet and then pick up another paper clip, or nail with the paper clip. 3. Rub the paper clip slowly over the magnet in its long direction about fifty times. Now try to pick up a second paper clip with the first paper clip, but without the

  8. Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Transportation EnergyPredictive Simulation of EnginesReacting FlowApplied Math & SoftwareSoftware Softwareadmin2015-10-30T02:00:39+00:00 The studies of mathematical methods and ...

  9. Open-Source GIS

    SciTech Connect (OSTI)

    Vatsavai, Raju; Burk, Thomas E; Lime, Steve

    2012-01-01

    The components making up an Open Source GIS are explained in this chapter. A map server (Sect. 30.1) can broadly be defined as a software platform for dynamically generating spatially referenced digital map products. The University of Minnesota MapServer (UMN Map Server) is one such system. Its basic features are visualization, overlay, and query. Section 30.2 names and explains many of the geospatial open source libraries, such as GDAL and OGR. The other libraries are FDO, JTS, GEOS, JCS, MetaCRS, and GPSBabel. The application examples include derived GIS-software and data format conversions. Quantum GIS, its origin and its applications explained in detail in Sect. 30.3. The features include a rich GUI, attribute tables, vector symbols, labeling, editing functions, projections, georeferencing, GPS support, analysis, and Web Map Server functionality. Future developments will address mobile applications, 3-D, and multithreading. The origins of PostgreSQL are outlined and PostGIS discussed in detail in Sect. 30.4. It extends PostgreSQL by implementing the Simple Feature standard. Section 30.5 details the most important open source licenses such as the GPL, the LGPL, the MIT License, and the BSD License, as well as the role of the Creative Commons.

  10. Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software NERSC/JGI Supported Software in Modules Package Category Version Module Install Date Date Made Default 7zip applications/ general 9.20.1 7zip/9.20.1 2013-01-14 2013-01-14 ABYSS applications/ bioinformatics 1.3.2 Abyss/1.3.2 2012-04-03 2012-04-03 ABySS applications/ bioinformatics 1.3.4 ABySS/1.3.4 2012-11-26 2012-11-26 ABySS applications/ bioinformatics 1.3.6 ABySS/1.3.6 2014-05-06 ABySS applications/ bioinformatics 1.5.0 ABySS/1.5.0 2014-05-06 ABySS applications/ bioinformatics 1.9.0

  11. Toward enterprise GIS design for DOE

    SciTech Connect (OSTI)

    Rich, P. M.; Riggs, T. L.; Witkowski, M. S.; Keating, G. N.

    2004-01-01

    An increasing number of institutions are challenged with implementing robust geographic information system (GIS) capabilities for a large number of individuals through information sharing and interconnected networks. In the past, numerous technological roadblocks hampered successful implementation of enterprise GIS (EGIS). With the advent of high-speed networks, increasingly fast computers, intelligent spatial data serving technologies, improved data architecture, and advances in GIS software, the newest challenge involves integration of the various technological and institutional components. This integration can be viewed as an inevitable stage in the evolution of GIS. Successful EGIS design depends on three elements: (1) distinct stakeholder roles, (2) a complete geospatial data cycle, and (3) proven data warehouse concepts.

  12. DOE GIS core team - a best practice

    SciTech Connect (OSTI)

    Bollinger, J.; Bhaduri, Budhendra; Bleakly, D. R.; Brady-Sabeff, Liz; Guber, Al; Guziel, K. A.; Hargrove, Susan; Lee, J.; Lee, R.; Mickus, Kurt; Morehouse, David; Moore, K.; Ramsdell, Amy; Rich, P. M.

    2004-01-01

    Large government organizations such as the Department of Energy (DOE) are challenged with identifying and implementing best geospatial information management practices to ensure that operational needs are met and government objectives are achieved. Geographic Information System (GIS) professionals, complex wide within the Department, conduct spatial information management practices on a daily basis to complete a wide variety of science and engineering tasks. The DOE Office of the CIO recognized the wealth of geospatial information management knowledge within the DOE complex and formed the DOE GIS Core Team in 2001 as a result. The team is comprised of GIS experts-representing all major DOE labs, site facilities, and programs-who volunteer their time to address issues impacting the entire complex. These include the President's management agenda (with emphasis on the Geospatial One-Stop), homeland security, emergency response, site management, software and geospatial data licensing, and federal, national, and international standards governing the creation and dissemination of geospatial data. The strength of the DOE GIS Core Team is the wide diversity of GIS and scientific expertise represented on the team, which allows it to provide the DOE CIO's office with sound guidance on complex wide issues from a GIS practitioner's perspective. The Core Team's mission is 'to foster technical excellence and communication, to identify and advocate best business practices, and to provide sound recommendations on policy and standards.' As a first step toward identifying best practices the feam conducted a survey of all known GIS assets across the DOE complex. The survey identified each site's GIS expertise, operating systems architecture and software applications, major project areas supported, and a number of other metrics important to the operation of a GIS organization. Results of the survey will be discussed, along with the mission of the Core Team. A broad overview of best

  13. Repast vector GIS integration.

    SciTech Connect (OSTI)

    Najlis, R.; North, M. J.; Decision and Information Sciences

    2005-01-01

    Repast now supports the reading, writing, and display of shapefile data. In the Repast-GIS integration, these tasks are generally broken up into two different classes, a data class, and a display class. The data class allows data to be read into Repast from the GIS, and written out from Repast into a GIS format. The current implementation of GIS in Repast is focused on two systems: ESRI ArcMap and OpenMap. This paper will elucidate how to use each of these systems with Repast.

  14. NREL: Dynamic Maps, GIS Data, and Analysis Tools - About GIS...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    About GIS at NREL NREL's Geospatial Data Science Team analyzes renewable energy resources ... GIS is a computer-based system used to manipulate, manage, and analyze multidisciplinary ...

  15. GIS data | OpenEI Community

    Open Energy Info (EERE)

    GIS data Home NickL's picture Submitted by NickL(137) Contributor 25 June, 2012 - 21:45 GIS keyword geospatial data GIS GIS data Explore the geospatial datasets in OpenEI's...

  16. GIS | OpenEI Community

    Open Energy Info (EERE)

    GIS keyword and include US and global energy data. Search solar, wind, biomass and wave energy resources. Do you have GIS data you would like to share? Please add it to OpenEI's...

  17. Software Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software Tools Software Tools Copyright materials are released under different mechanisms: Open Source Software and Portfolio Software. CONTACT thumbnail of Kathleen McDonald Head ...

  18. Evaluating the Potential of Commercial GIS for Accelerator Configuration Management

    SciTech Connect (OSTI)

    T.L. Larrieu; Y.R. Roblin; K. White; R. Slominski

    2005-10-10

    The Geographic Information System (GIS) is a tool used by industries needing to track information about spatially distributed assets. A water utility, for example, must know not only the precise location of each pipe and pump, but also the respective pressure rating and flow rate of each. In many ways, an accelerator such as CEBAF (Continuous Electron Beam Accelerator Facility) can be viewed as an ''electron utility''. Whereas the water utility uses pipes and pumps, the ''electron utility'' uses magnets and RF cavities. At Jefferson lab we are exploring the possibility of implementing ESRI's ArcGIS as the framework for building an all-encompassing accelerator configuration database that integrates location, configuration, maintenance, and connectivity details of all hardware and software. The possibilities of doing so are intriguing. From the GIS, software such as the model server could always extract the most-up-to-date layout information maintained by the Survey & Alignment for lattice modeling. The Mechanical Engineering department could use ArcGIS tools to generate CAD drawings of machine segments from the same database. Ultimately, the greatest benefit of the GIS implementation could be to liberate operators and engineers from the limitations of the current system-by-system view of machine configuration and allow a more integrated regional approach. The commercial GIS package provides a rich set of tools for database-connectivity, versioning, distributed editing, importing and exporting, and graphical analysis and querying, and therefore obviates the need for much custom development. However, formidable challenges to implementation exist and these challenges are not only technical and manpower issues, but also organizational ones. The GIS approach would crosscut organizational boundaries and require departments, which heretofore have had free reign to manage their own data, to cede some control and agree to a centralized framework.

  19. OpenEI Community - GIS

    Open Energy Info (EERE)

    keyword and include US and global energy data. Search solar, wind, biomass and wave energy resources.

    Do you have GIS data you would like to share? Please add it...

  20. GIS-Based Infrastructure Modeling

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    GIS-Based Infrastructure Modeling Hydrogen Scenario Meeting August 9-10, 2006 Keith Parks, NREL GIS-Based Infrastructure Modeling * Station Analysis - Selection Criteria - Los Angeles * By 2015 (10 & 20 Station Layouts) * By 2025 (100 & 600 Station Layouts) - NYC * Early Infrastructure (20 stations) Comparison * Station Layouts (SMR, Liquid, Pipeline) * Delivery Discussion Station Selection Criteria * Consumer strategy attributes rated good and above * Proximal to major civic airports *

  1. NREL: Dynamic Maps, GIS Data, and Analysis Tools - Solar Maps

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Geographic Information System (GIS) solar resource data, access the Data Resources page. ... Printable Version NREL GIS Home About NREL GIS Renewable Energy Technical Potential ...

  2. NREL: Dynamic Maps, GIS Data, and Analysis Tools - Renewable...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Renewable Energy Technical Potentials: A GIS-Based Analysis (PDF 2.7 MB) represents the ... Printable Version NREL GIS Home About NREL GIS Renewable Energy Technical Potential ...

  3. Protecting Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    your software outside of the Lab even if you only plan to share the software with other academic institutions, please contact us. How to Report: Complete the Software Disclosure...

  4. Portfolio Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    These software tools are available through EULAs. KIVA The KIVA family of Computational Fluid Dynamics (CFD) software predicts complex fuel and air flows as well as ignition, ...

  5. Intelligent Object-Oriented GIS Engine W/dynamic Coupling to Modeled Objects

    Energy Science and Technology Software Center (OSTI)

    1997-02-12

    The GEOVIEWER is an intelligent object-oriented Geographic Information System (GIS) engine that provides not only a spatially-optimized object representation, but also direct linkage to the underlying object, its data and behaviors. Tools are incorporated to perform tasks involving typical GIS functionality, data ingestion, linkage to external models, and integration with other application frameworks. The GOEVIEWER module was designed to provide GIS functionality to create, query, view, and manipulate software objects within a selected area undermore » investigation in a simulation system. Many of these objects are not stored in a format conductive to efficient GIS usage. Their dynamic nature, complexity, and the sheer number of possible entity classes preclude effective integration with traditional GIS technologies due to the loosely coupled nature of their data representations. The primary difference between GEOVIEWER and standard GIS packages is that standard GIS packages offer static views of geospatial data while GEOVIEWER can be dynamically coupled to models and/or applications producing data and, therefore, display changes in geometry, attributes or behavior as they occur in the simulation.« less

  6. Integrating GIS with Distributed Applications Using Dynamic Data-Sharing Mechanisms

    SciTech Connect (OSTI)

    Burnett, Robert A. ); Tzemos, Spyridon ); Stoops, LaMar R. )

    2002-08-21

    Effective integration of a stand-alone GIS (e.g., ArcView 3.x) into a complex distributed software application requires an efficient, reliable mechanism for passing data and function requests to and from the GIS component. This paper describes the use of dynamic data-sharing and inter-process communication mechanisms to integrate GIS capability into a multi-jurisdictional distributed emergency management information system. These mechanisms include dynamic layer updates from spatial and attribute information shared via a distributed relational database across multiple sites; storage of private and shared ViewMarks to facilitate consistent GIS views; and asynchronous inter-process communication using function queuing and a data sharing library.

  7. Software Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software Tools Software Tools Copyright materials are released under different mechanisms: Open Source Software and Portfolio Software. CONTACT thumbnail of Kathleen McDonald Head of Intellectual Property, Business Development Executive Kathleen McDonald Richard P. Feynman Center for Innovation (505) 665-9090 Email The Richard P. Feynman Center for Innovation (FCI) releases copyright materials from Los Alamos under different mechanisms. Open Source Software GitHub Explore all open source

  8. Lower granite GIS data description and collection guidelines

    SciTech Connect (OSTI)

    Gordon, J.L.; Evans, B.J.; Perry, E.M.

    1995-12-01

    The Lower Granite Geographic Information System (GIS) was developed jointly by the US Army Corps of Engineers (USCOE) Walla Walla District and the Pacific Northwest Laboratory (PNL). The goal of the project is to use GIS technology to analyze impacts of the drawdown mitigation option on the physical and biological environment of the Lower Granite Reservoir. The drawdown mitigation option is based on the hypothesis that faster juvenile salmon travel to the ocean would result in higher juvenile survival and greater smolt-to-adult return ratios; to accomplish this, reservoir elevations would be lowered to increase channel velocities. Altering the elevation of the reservoirs on the Snake River is expected to have a variety of impacts to the Physical environment including changes to water velocity, temperature, dissolved gases, and turbidity. The GIS was developed to evaluate these changes and the resulting impacts on the anadromous and resident fish of the Snake River, as well as other aquatic organisms and terrestrial wildlife residing in the adjacent riparian areas. The Lower Granite GIS was developed using commercial hardware and software and is supported by a commercial relational database. Much of the initial system development involved collecting and incorporating data describing the river channel characteristics, hydrologic properties, and aquatic ecology. Potentially meaningful data for the Lower Granite GIS were identified and an extensive data search was performed. Data were obtained from scientists who are analyzing the habitats, limnology, and hydrology of the Snake River. The next six sections of this document describe the bathymetry, fish abundance, substrate, sediment chemistry, and channel hydrology data.

  9. Software Providers

    Broader source: Energy.gov [DOE]

    Software providers interested in linking their software to the Home Energy Scoring Tool can do so via an application programming interface (API). By licensing the Home Energy Score API, third-party...

  10. I. Purpose

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Guidance for EPAct 2005 Section 242 Program I. Purpose In the Energy Policy Act of 2005 (EPAct 2005; Public Law 109-58) Congress established a new program to support the expansion of hydropower energy development at existing dams and impoundments through an incentive payment procedure. Under section 242 of EPAct 2005, the Secretary of Energy is directed to provide incentive payments to the owner or operator of qualified hydroelectric facilities for electric energy generated and sold from a

  11. Development and Use of a GIS Workstation at the Oak Ridge National Laboratory

    SciTech Connect (OSTI)

    Dickey, Mark W

    2007-01-01

    Oak Ridge National Laboratory (ORNL) is the Department of Energy s (DOE) largest multipurpose science and energy laboratory. As an interdisciplinary research organization, access to information plays a critical part in the success of the many research efforts in progress at the Laboratory. The Research Library, in a supportive role, enables staff to fulfill the Laboratory s mission by making available a myriad of information resources including paper and electronic maps. The Research Library Geographic Information System (GIS) workstation was developed to better serve library customers by providing convenient access to a variety of mapping resources. The GIS workstation functions as a supplement to the paper map collection by providing customers with maps in an electronic format that can easily be inserted into memos, reports, and journal articles. Customer interest, together with the growing availability of low-cost and user-friendly mapping software, led to the development of the GIS workstation, which hosts an array of commercial mapping software that enables customers to produce ready-made topographic maps, current and historical maps, and road maps. Customers may also create customized maps using their own data or data supplied by the software vendor. This article focuses on the development, implementation, and use of the library s GIS workstation by providing a brief description of hardware components, mapping resources, and how these resources are used by Laboratory staff.

  12. NREL: Dynamic Maps, GIS Data, and Analysis Tools - Biomass Maps

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    analyzed both statistically and graphically using a geographic information system (GIS). ... For Geographic Information System (GIS) biomass resource data, access the Data Resources ...

  13. NREL: Dynamic Maps, GIS Data, and Analysis Tools - Renewable...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Printable Version NREL GIS Home About NREL GIS Renewable Energy Technical Potential Renewable Energy Economic Potential Maps Data Resources Data Visualization & Geospatial Tools ...

  14. NREL: Dynamic Maps, GIS Data, and Analysis Tools - Webmaster

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Your name: Your email address: Your message: Send Message Printable Version NREL GIS Home About NREL GIS Renewable Energy Technical Potential Renewable Energy Economic Potential ...

  15. NREL: Dynamic Maps, GIS Data, and Analysis Tools - Geospatial...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Printable Version NREL GIS Home About NREL GIS Renewable Energy Technical Potential Renewable Energy Economic Potential Maps Data Resources Data Visualization & Geospatial Tools ...

  16. NREL: Dynamic Maps, GIS Data, and Analysis Tools - Data Resources

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NREL's Geospatial Data Science Team develops technology-specific GIS data maps for a ... NREL's Geospatial Data Science Team develops technology-specific GIS data maps for a ...

  17. NREL: Dynamic Maps, GIS Data, and Analysis Tools - Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... For a complete listing of NREL publications, please visit the Publications Database website. Printable Version NREL GIS Home About NREL GIS Renewable Energy Technical Potential ...

  18. NREL: Dynamic Maps, GIS Data, and Analysis Tools - Hydrogen Maps

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Below are some examples of how geographic information system (GIS) modeling is used in ... Infrastructure Demand - Consumer Strategy GIS is used to analyze demographic, ...

  19. NREL: Dynamic Maps, GIS Data, and Analysis Tools - Geographic...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Geographic Information System Data Background NREL's GIS Team develops technology-specific GIS data maps for a variety of areas, including biomass, geothermal, solar, wind, and...

  20. 06554_GreenRiverGIS | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    GIS and Web-Based Water Resource Geospatial Infrastructure for Oil Shale Development Last ... GIS- (Geographic Information Systems) and web-based water resource geospatial ...

  1. Geographic information system (G.I.S.) research project at Navajo Community College - Shiprock Campus

    SciTech Connect (OSTI)

    Yazzie, R.; Peter, C.; Aaspas, B.; Isely, D.; Grey, R.

    1995-12-31

    The Navajo and Hopi GIS Project was established to assess the feasibility and impact of implementing GIS techology at Tribal institutions. Los Alamos and Lawrence Livermore National Laboratories funded the Navajo and Hopi Geographic Information System (G.I.S.) Project and assigned a mentor from LANL to help guide the project for three summer months of 1995. The six organizations involved were: LANL, LLNL, Navajo Community College, Navajo Nation Land Office, Northern Arizona University and San Juan College. The Navajo Land Office provided the system software, hardware and training. Northern Arizona University selected two students to work at Hopi Water Resource Department. Navajo Community College provided two students and two faculty members. San Juan College provided one student to work with the N.C.C. group. This made up two project teams which led to two project sites. The project sites are the Water Resource Department on the Hopi reservation and Navajo Community College in Shiprock, New Mexico.

  2. GIS solutions for ecosystem management in developing countries: A case study of Sao Tome and Principe

    SciTech Connect (OSTI)

    Barnes, L.; Barrasso, T.; Pinto da Costa, H.

    1995-12-01

    The purpose of this paper is to promote awareness of the application of the Geographic information system (GIS) technology to the management of ecosystems in developing countries. The adoptation of systematic environmental research and management techniques by national and local conservation programs helps ensure the sustainability of important biological resources.

  3. SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Configuration...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Configuration Management ... managers, and other information system development and maintenance professionals with ...

  4. Software Developers

    Broader source: Energy.gov [DOE]

    Because SEED will provide a common, open-source data framework, software developers will be able to write applications that access the data in a consistent way (with proper permissions), or build functionalities onto the SEED platform in a replicable way.

  5. Software - Facilities - Radiation Effects Facility / Cyclotron Institute /

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Texas A&M University Software SEUSS The instrumentation used during measurements with the beam is fully automated and is controlled from a dedicated personal computer. A customized software package, SEUSS (Single Event Upset System Supervisor), was written specifically for this purpose. A demo version of this software is available for download below. Download the demo version of the software here. Signal Inputs for Beam Control A user-provided signal can be fed into our electronics to be

  6. Software and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software and Tools Software and Tools The table below shows the software installed on Euclid that is managed by modules. Package Category Version Module Install Date Date Made ...

  7. TOUGH2 software qualification

    SciTech Connect (OSTI)

    Pruess, K.; Simmons, A.; Wu, Y.S.; Moridis, G.

    1996-02-01

    TOUGH2 is a numerical simulation code for multi-dimensional coupled fluid and heat flow of multiphase, multicomponent fluid mixtures in porous and fractured media. It belongs to the MULKOM ({open_quotes}MULti-KOMponent{close_quotes}) family of codes and is a more general version of the TOUGH simulator. The MULKOM family of codes was originally developed with a focus on geothermal reservoir simulation. They are suited to modeling systems which contain different fluid mixtures, with applications to flow problems arising in the context of high-level nuclear waste isolation, oil and gas recovery and storage, and groundwater resource protection. TOUGH2 is essentially a subset of MULKOM, consisting of a selection of the better tested and documented MULKOM program modules. The purpose of this package of reports is to provide all software baseline documents necessary for the software qualification of TOUGH2.

  8. NREL: Dynamic Maps, GIS Data, and Analysis Tools - Data Visualization...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Please visit http:maps.nrel.gov for the most current list of available NREL's GIS ... Easily search our collection of maps created by the GIS team. Please use the search box ...

  9. NREL: Dynamic Maps, GIS Data, and Analysis Tools - Wind Maps

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Additional Resources Wind Prospector A web-based GIS applications designed to support ... For information on how the 50m maps were developed, access the GIS Data Background page. ...

  10. NREL: Dynamic Maps, GIS Data, and Analysis Tools - International...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Below are some examples of how geographic information system (GIS) modeling is used in ... PDF 1,226 KB For Geographic Information System (GIS) resource data, access the Data ...

  11. GIS Symbology for FRMAC/CMHT Radiological/Nuclear Products

    SciTech Connect (OSTI)

    Walker, H; Aluzzi, F; Foster, K; Pobanz, B; Sher, B

    2008-10-06

    This document is intended to codify, to the extent currently possible, the representation of map products produced for and by the Federal Radiological Monitoring and Assessment Center (FRMAC) and the Consequence Management Home Team (CHMT), particularly those that include model products from the National Atmospheric Release Advisory Capability (NARAC). This is to facilitate consistency between GIS products produced by different members of these teams, which should ease the task of interpreting these products by both team members and those outside the team who may need to use these products during a response. The aspects of symbology being considered are primarily isopleths levels (breakpoints) and colors used to plot NARAC modeled dose or deposition fields on mpas, although some comments will be made about the handling of legend and supporting textual information. Other aspects of symbolizing such products (e.g., transparency) are being left to the individual team members to allow them to adapt to particular organizational needs or requirements that develop during a particular a response or exercise. This document has been written in coordination with the creation of training material in Baskett, et al., 2008. It is not intended as an aid to NARAC product interpretation but to facilitate the work of GIS specialists who deal with these products in map design and in the development of supporting scripts and software that partially or completely automate the integration of NARAC model products with other GIS data. This work was completed as part of the NA-42 Technical Integration Project on GIS Automated Data Processing and Map Production in FY 2008. Other efforts that are part of this work include (a) updating the NARAC shapefile product representation to facilitate the automation work proceed at RSL as part of the same TI effort and (b) to ensure that the NARAC shapefile construct includes all of the necessary legend and other textual data to interpret dispersion

  12. System Management Software

    Energy Science and Technology Software Center (OSTI)

    2013-02-22

    MacPatch is Mac OS X system management software solution. It's used for patching, software distribution and inventory.

  13. Sandia software guidelines: Software quality planning

    SciTech Connect (OSTI)

    Not Available

    1987-08-01

    This volume is one in a series of Sandia Software Guidelines intended for use in producing quality software within Sandia National Laboratories. In consonance with the IEEE Standard for Software Quality Assurance Plans, this volume identifies procedures to follow in producing a Software Quality Assurance Plan for an organization or a project, and provides an example project SQA plan. 2 figs., 4 tabs.

  14. Software and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software and Tools Software and Tools The table below shows the software installed on Euclid that is managed by modules. Package Category Version Module Install Date Date Made Default Last edited: 2016-03-21 13:44:4

  15. Software | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Licensable Software In addition to helping the U.S. Department of Energy meet its research and development goals, Argonne's researchers have created a wealth of powerful software and models with broad-ranging applications, such as simulation and modeling, computation, Internet usage, and more. Argonne has both commercially available software and open-source (free) software. Browse both categories to see what software is relevant to your needs. Licenses are available for commercial software

  16. U.S. Regional Demand Forecasts Using NEMS and GIS

    SciTech Connect (OSTI)

    Cohen, Jesse A.; Edwards, Jennifer L.; Marnay, Chris

    2005-07-01

    The National Energy Modeling System (NEMS) is a multi-sector, integrated model of the U.S. energy system put out by the Department of Energy's Energy Information Administration. NEMS is used to produce the annual 20-year forecast of U.S. energy use aggregated to the nine-region census division level. The research objective was to disaggregate this regional energy forecast to the county level for select forecast years, for use in a more detailed and accurate regional analysis of energy usage across the U.S. The process of disaggregation using a geographic information system (GIS) was researched and a model was created utilizing available population forecasts and climate zone data. The model's primary purpose was to generate an energy demand forecast with greater spatial resolution than what is currently produced by NEMS, and to produce a flexible model that can be used repeatedly as an add-on to NEMS in which detailed analysis can be executed exogenously with results fed back into the NEMS data flow. The methods developed were then applied to the study data to obtain residential and commercial electricity demand forecasts. The model was subjected to comparative and statistical testing to assess predictive accuracy. Forecasts using this model were robust and accurate in slow-growing, temperate regions such as the Midwest and Mountain regions. Interestingly, however, the model performed with less accuracy in the Pacific and Northwest regions of the country where population growth was more active. In the future more refined methods will be necessary to improve the accuracy of these forecasts. The disaggregation method was written into a flexible tool within the ArcGIS environment which enables the user to output the results in five year intervals over the period 2000-2025. In addition, the outputs of this tool were used to develop a time-series simulation showing the temporal changes in electricity forecasts in terms of absolute, per capita, and density of demand.

  17. Applied Math & Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Math & Software - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us ... Arctic Climate Measurements Global Climate Models Software Sustainable Subsurface ...

  18. GIS-Based Infrastructure Modeling | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    GIS-Based Infrastructure Modeling GIS-Based Infrastructure Modeling Presentation by NREL's Keith Parks at the 2010 - 2025 Scenario Analysis for Hydrogen Fuel Cell Vehicles and Infrastructure Meeting on August 9 - 10, 2006 in Washington, D.C. parks_gis_infrastructure_modeling.pdf (993.56 KB) More Documents & Publications DOE Hydrogen Transition Analysis Workshop Geographically-Based Infrastructure Analysis for California Hydrogen and FCV Implementation Scenarios, 2010 - 2025

  19. Recommendation 225: Recommendation on DOE Oak Ridge GIS Fact Sheets |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 5: Recommendation on DOE Oak Ridge GIS Fact Sheets Recommendation 225: Recommendation on DOE Oak Ridge GIS Fact Sheets Not all fact sheets that can be accessed on the DOE GIS include descriptions of future decisions or actions on cleanup areas. ORSSAB recommends that all fact sheets identify future actions expected or planned. Recommendation225.pdf (148.18 KB) Responseto225.pdf (238.07 KB) More Documents & Publications Recommendation 224: Recommendations on the FY

  20. Web Mapping and Online GIS Applications for Renewable Energy...

    Open Energy Info (EERE)

    for Renewable Energy Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Web Mapping and Online GIS Applications for Renewable Energy AgencyCompany Organization:...

  1. NREL GIS Data: Bhutan High Resolution Wind Resource - Datasets...

    Open Energy Info (EERE)

    NREL GIS Data: Bhutan High Resolution Wind Resource This shapefile containing 50 meter height data has been validated by NREL and wind energy meteorological consultants. However,...

  2. NREL: Dynamic Maps, GIS Data, and Analysis Tools - Maps

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hydrogen Maps GIS modeling is used to analyze and visualize the spatial relationship between resources (renewable and non renewable), hydrogen production facilities, transportation ...

  3. NREL: Dynamic Maps, GIS Data, and Analysis Tools - Geothermal...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... National Geothermal Data System (NGDS), or Southern Methodist University Geothermal Laboratory. For Geographic Information System (GIS) geothermal resource data, access the Data

  4. Solar: monthly and annual average direct normal (DNI) GIS data...

    Open Energy Info (EERE)

    Download Carribean Islands Central America DNI GIS Mexico NREL GEF SWERA UNEP atmospheric water v... solar Additional Info Field Value Source www.nrel.gov Author National Renewable...

  5. Targeting commercial and industrial customers with GIS

    SciTech Connect (OSTI)

    Camp, W.A.

    1994-11-01

    Unlike siting new retail stores, utility companies face unique barriers to expanding their markets. Other than by merger and acquisition, utility companies can only expand into new markets by adding new transmission and/or pipelines to existing facilities. This situation lends itself to the use of corridor target marketing along the leading edge of existing markets to determine the best potential for expansion. This paper will detail how the Tennessee Valley Authority (TVA) utilized TARGETMASTER, a customized geographic information system (GIS), to locate and assess the potential to directly serve electrical power to commercial and industrial customers along a corridor.

  6. The Role of GIS in Decision Support Systems | Department of Energy

    Office of Environmental Management (EM)

    The Role of GIS in Decision Support Systems The Role of GIS in Decision Support Systems The Role of GIS in Decision Support Systems (2.01 MB) More Documents & Publications ...

  7. Open Source Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Open Source Software Open Source Software All open source software available through the Laboratory is listed below. Contact thumbnail of Kathleen McDonald Head of Intellectual Property, Business Development Executive Kathleen McDonald Richard P. Feynman Center for Innovation (505) 667-5844 Email For more information regarding how to access software from Los Alamos, contact the Software Team. brulilo, Version 0.x brulilo is a Python package for building and evolving thermonuclear reaction

  8. Prometheus Reactor I&C Software Development Methodology, for Action

    SciTech Connect (OSTI)

    T. Hamilton

    2005-07-30

    The purpose of this letter is to submit the Reactor Instrumentation and Control (I&C) software life cycle, development methodology, and programming language selections and rationale for project Prometheus to NR for approval. This letter also provides the draft Reactor I&C Software Development Process Manual and Reactor Module Software Development Plan to NR for information.

  9. Fit for Purpose Projects

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    that needs to be addressed by current and future Fit-for-Purpose projects includes: Reservoir pressure management - In deep saline formations, pressure increases due to...

  10. Nuclear Energy Advanced Modeling and Simulation (NEAMS) Software

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Verification and Validation (V&V) Plan Requirements | Department of Energy Software Verification and Validation (V&V) Plan Requirements Nuclear Energy Advanced Modeling and Simulation (NEAMS) Software Verification and Validation (V&V) Plan Requirements The purpose of the NEAMS Software V&V Plan is to define what the NEAMS program expects in terms of V&V for the computational models that are developed under NEAMS. NEAMS Software Verification and Validation Plan

  11. User' Software Manual

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MM-Group Home MMG Advisory Committees 4-ID-D Home Recent Publications Beamline Info Optics Instrumentation Software User Info FAQs 4-ID-D Beamline Software Manual Introduction...

  12. CDF THERORY SOFTWARE

    Energy Science and Technology Software Center (OSTI)

    003883WKSTN00 cDF Theory Software for mesoscopic modeling of equilibrium and transport phenomena store.pnnl.gov

  13. Systems Analysis Workshop Purpose

    Broader source: Energy.gov [DOE]

    Presentation on SAW purpose to the DOE Systems Analysis Workshop held in Washington, D.C. July 28-29, 2004 to discuss and define role of systems analysis in DOE Hydrogen Program.

  14. C# Software Title Software Description Date

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Code (BLSCC), Version 1.x This software, written entirely in LabView, provides the command, control, and data acquisition capability for the BottleViz or CoilViz Bottle...

  15. Poster Presentation Purpose

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Presentation Purpose The primary purpose of the poster presentation is to provide an opportunity to communicate the results of research and to initiate discussion among science colleagues. Because poster presentations are usually done in groups, with observers milling around a large room of posters, the presentations are relaxed and more conducive to the exchange of ideas and techniques between presenters and observers. The Poster A good poster is uncluttered and clear in design. It has legible

  16. eGIS Portal PIA, Bonneville Power Administration | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    eGIS Portal PIA, Bonneville Power Administration eGIS Portal PIA, Bonneville Power Administration eGIS Portal PIA, Bonneville Power Administration eGIS Portal PIA, Bonneville Power Administration (395.19 KB) More Documents & Publications PIA - Bonneville Power Adminstration Ethics Helpline Integrated Safety Management Workshop Registration, PIA, Idaho National Laboratory Occupational Medicine - Assistant

  17. Safesky Software | Open Energy Information

    Open Energy Info (EERE)

    Safesky Software Jump to: navigation, search Name: Safesky Software Place: Israel Product: Israel-based innovative technologies company References: Safesky Software1 This article...

  18. Elite Software | Open Energy Information

    Open Energy Info (EERE)

    Elite Software Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Elite Software AgencyCompany Organization: Elite Software Sector: Energy Focus Area: Buildings Phase:...

  19. IS&T@LANL Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IS&T@LANL Software IS&T@LANL Software The following software packages have been developed with significant LANL involvement or lead. Contact Institute Director Stephan Eidenbenz ...

  20. Software Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Windows and Building Envelope » Software Tools Software Tools See past projects. Fenestration Software Tools Lead Performer: Lawrence Berkeley National Laboratory - Berkeley, CA

  1. Buffalo Software | Open Energy Information

    Open Energy Info (EERE)

    Software Jump to: navigation, search Logo: Buffalo Software Name: Buffalo Software Place: Broomfield Country: United States Zip: 80020 Region: Rockies Area Sector: Buildings...

  2. An Approach to Integrate a Space-Time GIS Data Model with High Performance Computers

    SciTech Connect (OSTI)

    Wang, Dali; Zhao, Ziliang; Shaw, Shih-Lung

    2011-01-01

    In this paper, we describe an approach to integrate a Space-Time GIS data model on a high performance computing platform. The Space-Time GIS data model has been developed on a desktop computing environment. We use the Space-Time GIS data model to generate GIS module, which organizes a series of remote sensing data. We are in the process of porting the GIS module into an HPC environment, in which the GIS modules handle large dataset directly via parallel file system. Although it is an ongoing project, authors hope this effort can inspire further discussions on the integration of GIS on high performance computing platforms.

  3. Track 2 Commercial Grade Dedication of Software.

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of other types of software - Instrumentation & control software - Software development Design and Analysis Software * Finite element analysis * Piping analysis * Seismic...

  4. West Flank Coso FORGE: ArcGIS data

    SciTech Connect (OSTI)

    Doug Blankenship

    2015-12-21

    Geologic ArcGIS data of West Flank Coso, Ca FORGE site from a unpublished map by Rich Whitmarsh. The zip file includes a DEM, hillshade and four shapefiles of the general outlines of FORGE area.

  5. Tidal Stream Power Web GIS Tool | Open Energy Information

    Open Energy Info (EERE)

    are generated by interpolating the model results from computational grids onto an ArcGIS raster grid with 0.003 resolution and are useful for a quick visual examination.1...

  6. GENII Version 2 Software Design Document

    SciTech Connect (OSTI)

    Napier, Bruce A.; Strenge, Dennis L.; Ramsdell, James V.; Eslinger, Paul W.; Fosmire, Christian J.

    2004-03-08

    This document describes the architectural design for the GENII-V2 software package. This document defines details of the overall structure of the software, the major software components, their data file interfaces, and specific mathematical models to be used. The design represents a translation of the requirements into a description of the software structure, software components, interfaces, and necessary data. The design focuses on the major components and data communication links that are key to the implementation of the software within the operating framework. The purpose of the GENII-V2 software package is to provide the capability to perform dose and risk assessments of environmental releases of radionuclides. The software also has the capability of calculating environmental accumulation and radiation doses from surface water, groundwater, and soil (buried waste) media when an input concentration of radionuclide in these media is provided. This report represents a detailed description of the capabilities of the software product with exact specifications of mathematical models that form the basis for the software implementation and testing efforts. This report also presents a detailed description of the overall structure of the software package, details of main components (implemented in the current phase of work), details of data communication files, and content of basic output reports. The GENII system includes the capabilities for calculating radiation doses following chronic and acute releases. Radionuclide transport via air, water, or biological activity may be considered. Air transport options include both puff and plume models, each allow use of an effective stack height or calculation of plume rise from buoyant or momentum effects (or both). Building wake effects can be included in acute atmospheric release scenarios. The code provides risk estimates for health effects to individuals or populations; these can be obtained using the code by applying

  7. NREL: Dynamic Maps, GIS Data, and Analysis Tools Home Page

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The Dynamic Maps, Geographic Information System (GIS) Data and Analysis Tools website provides maps, data and tools for renewable energy resources that determine which energy technologies are viable solutions in domestic and international regions. MapSearch - While this site contains detailed information and quality data, if you want to search for the latest and most up-to-date maps created by NREL, please visit our MapSearch: http://www.nrel.gov/gis/mapsearch/ Renewable Energy Technical

  8. Regional Geology: GIS Database for Alternative Host Rocks and Potential

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Siting Guidelines | Department of Energy Regional Geology: GIS Database for Alternative Host Rocks and Potential Siting Guidelines Regional Geology: GIS Database for Alternative Host Rocks and Potential Siting Guidelines The objective of this work is to develop a spatial database that integrates both geologic data for alternative host-rock formations and information that has been historically used for siting guidelines, both in the US and other countries. The Used Fuel Disposition Campaign

  9. Next Generation (NextGen) Geospatial Information System (GIS) | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Next Generation (NextGen) Geospatial Information System (GIS) Next Generation (NextGen) Geospatial Information System (GIS) July 12, 2013 - 12:17pm Addthis The U.S. Department of Energy Office of Legacy Management (LM) manages environmental records from Cold War legacy sites spanning nearly 40 years. These records are a key LM asset and must be managed and maintained efficiently and effectively. There are over 16 different applications that support the databases containing

  10. 06554_GreenRiverGIS | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    GIS and Web-Based Water Resource Geospatial Infrastructure for Oil Shale Development Last Reviewed 6/26/2013 DE-NT0006554 Goal The goal of this project is to develop a GIS- (Geographic Information Systems) and web-based water resource geospatial infrastructure, which contains the basin baseline datasets for surface and groundwater, customized analytical toolsets, and user interfaces (UIs). The water resource geospatial infrastructure will provide water management solutions that will facilitate

  11. GSG-GIS development program plan

    SciTech Connect (OSTI)

    Lee, R.C.

    1992-10-15

    For the past 40 years, the Savannah River Site (SRS) has been subjected to numerous geological and geotechnical investigations in support of facility construction and waste site development and remediation. Over this period,.a variety of different subcontractors have collected large quantities of geoscience data. In addition, current programs involve numerous investigators from different departments, and consequently, earth science data and interpretations are scattered among the departments, investigators, and subcontractors at SRS. As a result, scientific and management decisions cannot take advantage of the significant body of information that exists at SRS. Recent DOE Orders (Systematic Evaluation Program, 1991) have put specific requirements on their contractors to compile geological databases to coordinate DOE site data gathering and interpretations, and to assist in compiling safety analysis reports. The Earth Science Advisory Committee and the Environmental Advisory Committee have also made specific recommendations on the management of SRS geoscience data. This plan describes a management system to identify, communicate, and compile SRS geological (including geohydrologic), seismological, and geotechnical (656) data and interpretations on a Geographic Information System (GIS).

  12. Modules Software Environment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Environment » Modules Environment Modules Software Environment NERSC uses the module utility to manage nearly all software. There are two huge advantages of the module approach: NERSC can provide many different versions and/or installations of a single software package on a given machine, including a default version as well as several older and newer versions; and Users can easily switch to different versions or installations without having to explicitly specify different paths. With modules,

  13. ESTSC - Software Best Practices

    Office of Scientific and Technical Information (OSTI)

    ... with DOE-Approved site agreements Unclassified Controlled Nuclear Information (UCNI) Software that is protected by law from disclosure to persons not having a need-to-know. ...

  14. Software and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Connecting to NERSC Queues and Scheduling Job Logs & Statistics Application Performance Training & Tutorials Software Policies User Surveys NERSC Users Group User Announcements...

  15. Announcement of Computer Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    F 241.4 (10-01) (Replaces ESTSC F1 and ESTSC F2) All Other Editions Are Obsolete UNITED STATES DEPARTMENT OF ENERGY ANNOUNCEMENT OF COMPUTER SOFTWARE OMB Control Number 1910-1400 (OMB Burden Disclosure Statement is on last page of Instructions) Record Status (Select One): New Package Software Revision H. Description/Abstract PART I: STI SOFTWARE DESCRIPTION A. Software Title SHORT NAME OR ACRONYM KEYWORDS IN CONTEXT (KWIC) TITLE B. Developer(s) E-MAIL ADDRESS(ES) C. Site Product Number 1. DOE

  16. MENTORING PROGRAM Purpose

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Last Revised: February 5, 2013 MENTORING PROGRAM Purpose To provide a formal structure to develop employees through mentoring with other professionals at the Ames Laboratory. The mentoring program includes a focus on critical positions that have no succession planning in place. Objectives * To promote individual development through the transfer of skills, expert knowledge and insight. * To provide an additional resource for feedback and guidance. * To develop an internal pipeline for succession

  17. Cathodoluminescence Spectrum Imaging Software

    Energy Science and Technology Software Center (OSTI)

    2011-04-07

    The software developed for spectrum imaging is applied to the analysis of the spectrum series generated by our cathodoluminescence instrumentation. This software provides advanced processing capabilities s such: reconstruction of photon intensity (resolved in energy) and photon energy maps, extraction of the spectrum from selected areas, quantitative imaging mode, pixel-to-pixel correlation spectrum line scans, ASCII, output, filling routines, drift correction, etc.

  18. Plating Tank Control Software

    Energy Science and Technology Software Center (OSTI)

    1998-03-01

    The Plating Tank Control Software is a graphical user interface that controls and records plating process conditions for plating in high aspect ratio channels that require use of low current and long times. The software is written for a Pentium II PC with an 8 channel data acquisition card, and the necessary shunt resistors for measuring currents in the millampere range.

  19. Tax Deduction Qualified Software

    Office of Energy Efficiency and Renewable Energy (EERE)

    On this page you'll find information about the EnergyGauge Summit version 3.22 (incorporating DOE-2.1E (v120)) qualified computer software (buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings.

  20. Tax Deduction Qualified Software

    Office of Energy Efficiency and Renewable Energy (EERE)

    On this page you'll find information about the EnergyGauge Summit version 3.21 (incorporating DOE-2.1E (v120)) qualified computer software (buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings.

  1. Tax Deduction Qualified Software

    Office of Energy Efficiency and Renewable Energy (EERE)

    On this page you'll find information about the EnergyGauge Summit version 3.20 (incorporating DOE-2.1E (v120)) qualified computer software (buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings.

  2. LDUA software custodian`s notebook

    SciTech Connect (OSTI)

    Aftanas, B.L.

    1998-08-20

    This plan describes the activities to be performed and controls to be applied to the process of specifying, obtaining, and qualifying the control and data acquisition software for the Light Duty Utility Arm (LDUA) System. It serves the purpose of a software quality assurance plan, a verification and validation plan, and a configuration management plan. This plan applies to all software that is an integral part of the LDUA control and data acquisition system, that is, software that is installed in the computers that are part of the LDUA system as it is deployed in the field. This plan applies to the entire development process, including: requirements; design; implementation; and operations and maintenance. This plan does not apply to any software that is not integral with the LDUA system. This plan has-been prepared in accordance with WHC-CM-6-1 Engineering Practices, EP-2.1; WHC-CM-3-10 Software Practices; and WHC-CM-4-2, QR 19.0, Software Quality Assurance Requirements.

  3. Tracker 300 Software

    Energy Science and Technology Software Center (OSTI)

    2006-01-12

    The Tracker300 software is downloaded to an off-the-shelf product called RCM3400/RCM3410 made by Rabbit Semiconductor. The software is a closed loop control which computes the sun's position and provides stability compensation. Using the RCM3400/RCM3410 module, the software stores and retrieves parameters from the onboard flash. The software also allows for communication with a host. It will allow the parameters to be downloaded or uploaded, it will show the status of the controller, it will providemore » real-time feedback, and it will send command acknowledgements. The software will capture the GPS response and ensure the internal clock is set correctly.« less

  4. Software quality in 1997

    SciTech Connect (OSTI)

    Jones, C.

    1997-11-01

    For many years, software quality assurance lagged behind hardware quality assurance in terms of methods, metrics, and successful results. New approaches such as Quality Function Deployment (QFD) the ISO 9000-9004 standards, the SEI maturity levels, and Total Quality Management (TQM) are starting to attract wide attention, and in some cases to bring software quality levels up to a parity with manufacturing quality levels. Since software is on the critical path for many engineered products, and for internal business systems as well, the new approaches are starting to affect global competition and attract widespread international interest. It can be hypothesized that success in mastering software quality will be a key strategy for dominating global software markets in the 21st century.

  5. Sandia National Laboratories Advanced Simulation and Computing (ASC) Software Quality Plan. Part 2, Mappings for the ASC software quality engineering practices. Version 1.0.

    SciTech Connect (OSTI)

    Ellis, Molly A.; Heaphy, Robert; Sturtevant, Judith E.; Hodges, Ann Louise; Boucheron, Edward A.; Drake, Richard Roy; Forsythe, Christi A.; Schofield, Joseph Richard, Jr.; Pavlakos, Constantine James; Williamson, Charles Michael; Edwards, Harold Carter

    2005-01-01

    The purpose of the Sandia National Laboratories Advanced Simulation and Computing (ASC) Software Quality Plan is to clearly identify the practices that are the basis for continually improving the quality of ASC software products. The plan defines the ASC program software quality practices and provides mappings of these practices to Sandia Corporate Requirements CPR 1.3.2 and 1.3.6 and to a Department of Energy document, 'ASCI Software Quality Engineering: Goals, Principles, and Guidelines'. This document also identifies ASC management and software project teams responsibilities in implementing the software quality practices and in assessing progress towards achieving their software quality goals.

  6. Sandia National Laboratories Advanced Simulation and Computing (ASC) software quality plan. Part 1: ASC software quality engineering practices, Version 2.0.

    SciTech Connect (OSTI)

    Sturtevant, Judith E.; Heaphy, Robert; Hodges, Ann Louise; Boucheron, Edward A.; Drake, Richard Roy; Minana, Molly A.; Hackney, Patricia; Forsythe, Christi A.; Schofield, Joseph Richard, Jr.; Pavlakos, Constantine James; Williamson, Charles Michael; Edwards, Harold Carter

    2006-09-01

    The purpose of the Sandia National Laboratories Advanced Simulation and Computing (ASC) Software Quality Plan is to clearly identify the practices that are the basis for continually improving the quality of ASC software products. The plan defines the ASC program software quality practices and provides mappings of these practices to Sandia Corporate Requirements CPR 1.3.2 and 1.3.6 and to a Department of Energy document, ASCI Software Quality Engineering: Goals, Principles, and Guidelines. This document also identifies ASC management and software project teams responsibilities in implementing the software quality practices and in assessing progress towards achieving their software quality goals.

  7. Sandia National Laboratories Advanced Simulation and Computing (ASC) software quality plan part 2 mappings for the ASC software quality engineering practices, version 2.0.

    SciTech Connect (OSTI)

    Heaphy, Robert; Sturtevant, Judith E.; Hodges, Ann Louise; Boucheron, Edward A.; Drake, Richard Roy; Minana, Molly A.; Hackney, Patricia; Forsythe, Christi A.; Schofield, Joseph Richard, Jr.; Pavlakos, Constantine James; Williamson, Charles Michael; Edwards, Harold Carter

    2006-09-01

    The purpose of the Sandia National Laboratories Advanced Simulation and Computing (ASC) Software Quality Plan is to clearly identify the practices that are the basis for continually improving the quality of ASC software products. The plan defines the ASC program software quality practices and provides mappings of these practices to Sandia Corporate Requirements CPR001.3.2 and CPR001.3.6 and to a Department of Energy document, ''ASCI Software Quality Engineering: Goals, Principles, and Guidelines''. This document also identifies ASC management and software project teams' responsibilities in implementing the software quality practices and in assessing progress towards achieving their software quality goals.

  8. SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Configuration

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Management Checklist | Department of Energy SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Configuration Management Checklist SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Configuration Management Checklist The following checklist is intended to provide system owners, project managers, configuration managers, and other information system development and maintenance professionals with guidance in identifying and planning software configuration management (SCM)

  9. Multiphase flow calculation software

    DOE Patents [OSTI]

    Fincke, James R.

    2003-04-15

    Multiphase flow calculation software and computer-readable media carrying computer executable instructions for calculating liquid and gas phase mass flow rates of high void fraction multiphase flows. The multiphase flow calculation software employs various given, or experimentally determined, parameters in conjunction with a plurality of pressure differentials of a multiphase flow, preferably supplied by a differential pressure flowmeter or the like, to determine liquid and gas phase mass flow rates of the high void fraction multiphase flows. Embodiments of the multiphase flow calculation software are suitable for use in a variety of applications, including real-time management and control of an object system.

  10. Software Carpentry Bootcamp

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software Carpentry Bootcamp Software Carpentry Bootcamp carpenter-tools.jpg Overview Do you spend too much time wrestling with computers and not enough doing research? If so, NERSC will be hosting a free two-day Software Carpentry Boot Camp on March 28-29 to introduce scientists to skills and tools that will allow them to use computing more efficiently. The workshop will cover the core skills a researcher needs to know in order to be productive in a small team, and will be followed by four to

  11. Development of a GIS Based Dust Dispersion Modeling System.

    SciTech Connect (OSTI)

    Rutz, Frederick C.; Hoopes, Bonnie L.; Crandall, Duard W.; Allwine, K Jerry

    2004-08-12

    With residential areas moving closer to military training sites, the effects upon the environment and neighboring civilians due to dust generated by training exercises has become a growing concern. Under a project supported by the Strategic Environmental Research and Development Program (SERDP) of the Department of Defense, a custom application named DUSTRAN is currently under development that integrates a system of EPA atmospheric dispersion models with the ArcGIS application environment in order to simulate the dust dispersion generated by a planned training maneuver. This integration between modeling system and GIS application allows for the use of real world geospatial data such as terrain, land-use, and domain size as input by the modeling system. Output generated by the modeling system, such as concentration and deposition plumes, can then be displayed upon accurate maps representing the training site. This paper discusses the development of this integration between modeling system and Arc GIS application.

  12. Using GIS to Identify Remediation Areas in Landfills

    SciTech Connect (OSTI)

    Linda A.Tedrow

    2004-08-01

    This paper reports the use of GIS mapping software—ArcMap and ArcInfo Workstation—by the Idaho National Engineering and Environmental Laboratory (INEEL) as a non-intrusive method of locating and characterizing radioactive waste in a 97-acre landfill to aid in planning cleanup efforts. The fine-scale techniques and methods used offer potential application for other burial sites for which hazards indicate a non-intrusive approach. By converting many boxes of paper shipping records in multiple formats into a relational database linked to spatial data, the INEEL has related the paper history to our current GIS technologies and spatial data layers. The wide breadth of GIS techniques and tools quickly display areas in need of remediation as well as evaluate methods of remediation for specific areas as the site characterization is better understood and early assumptions are refined.

  13. Software Quality Assurance

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-10-02

    DOE N 251.40, dated 5/3/01, extends this directive until 12/31/01. To define requirements and responsibilities for software quality assurance (SQA) within the Department of Energy (DOE). Does not cancel other directives.

  14. Software Quality Assurance

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-10-02

    To define requirements and responsibilities for software quality assurance (SQA) within the Department of Energy (DOE). DOE N 251.40, dated 5/3/01, extends this directive until 12/31/01.

  15. Duty Cycle Software Model

    Energy Science and Technology Software Center (OSTI)

    2010-12-31

    The Software consists of code which is capable of processing a large volume of data to create a “duty cycle” which is representative of how equipment will function under certain conditions.

  16. HOMER® Energy Modeling Software

    Energy Science and Technology Software Center (OSTI)

    2000-12-31

    The HOMER® energy modeling software is a tool for designing and analyzing hybrid power systems, which contain a mix of conventional generators, cogeneration, wind turbines, solar photovoltaic, hydropower, batteries, fuel cells, hydropower, biomass and other inputs.

  17. Software and Data

    Office of Energy Efficiency and Renewable Energy (EERE)

    Here you can find software programs that model geothermal systems and economics, as well as data related to geothermal technology and energy to assist with calculation and model construction.

  18. Energy Modeling Software

    Broader source: Energy.gov [DOE]

    Information from energy simulation software is critical in the design of energy-efficient commercial buildings. The tools listed on this page are the product of Commercial Buildings Integration...

  19. Public Key FPGA Software

    Energy Science and Technology Software Center (OSTI)

    2013-07-25

    The Public Key (PK) FPGA software performs asymmetric authentication using the 163-bit Elliptic Curve Digital Signature Algorithm (ECDSA) on an embedded FPGA platform. A digital signature is created on user-supplied data, and communication with a host system is performed via a Serial Peripheral Interface (SPI) bus. Software includes all components necessary for signing, including custom random number generator for key creation and SHA-256 for data hashing.

  20. LIGA Scanner Control Software

    Energy Science and Technology Software Center (OSTI)

    1999-02-01

    The LIGA Scanner Software is a graphical user interface package that facilitates controlling the scanning operation of x-rays from a synchrotron and sample manipulation for making LIGA parts. The process requires scanning of the LIGA mask and the PMMA resist through a stationary x-ray beam to provide an evenly distributed x-ray exposure over the wafer. This software package has been written specifically to interface with Aerotech motor controllers.

  1. Software and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Franklin Queues and Policies File storage and I/O Software and Tools Debugging and profiling Cray XT Documentation Franklin is Being Retired Bassi Storage & File Systems Application Performance Data & Analytics Job Logs & Statistics Training & Tutorials Software Policies User Surveys NERSC Users Group Help Staff Blogs Request Repository Mailing List Need Help? Out-of-hours Status and Password help Call operations: 1-800-66-NERSC, option 1 or 510-486-6821 Account Support

  2. Software and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    File Storage and I/O Software and Tools Debugging and profiling Performance and Optimization Cray XE Documentation Cluster Compatibility Mode Hopper, Cray XE6 Carver Jesup Dirac Edison Phase I Euclid - Retired 01/31/2013 Franklin - Retired 04/30/12 Bassi Storage & File Systems Application Performance Data & Analytics Job Logs & Statistics Training & Tutorials Software Policies User Surveys NERSC Users Group Help Staff Blogs Request Repository Mailing List Need Help? Out-of-hours

  3. SHM Data Sets and Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SHM Data Sets and Software SHM Data Sets and Software SHM Data Sets and Software Contact Institute Director Charles Farrar (505) 665-0860 Email UCSD EI Director Michael Todd (858) ...

  4. Spatiotemporal nonpoint source pollution water quality management framework using bi-directional model-GIS linkage

    SciTech Connect (OSTI)

    Faizullabhoy, M.S.; Yoon, J.

    1999-07-01

    A framework for water quality assessment and management purposes was developed. In this framework, a bilateral linkage was implemented between the distributed model, Agricultural Nonpoint Source Pollution Model (AGNPS) and the Geographic Information System (GIS) to investigate a spatiotemporal nonpoint source pollution problem from a 750-acre watershed in the NSGA (Naval Security Group Activity) Northwest base at the Virginia/North Carolina border. AGNPS is an event-based, distributed parameter model that simulates runoff and the transport of sediment and nutrients (nitrogen and phosphorus) from predominantly agricultural watersheds. In this study rather than manually implementing AGNPS simulation, extracted data are integrated in an automated fashion through a direct bilateral linkage framework between the AGNPS model engine and the GIS. This bilateral linkage framework resulted in a powerful, up-to-date tool that would be capable of monitoring and instantaneously visualizing the transport of any pollutant as well as effectively identifying critical areas of the nonpoint source (NPS) pollution. The framework also allowed the various what if scenarios to support the decision-making processes. Best Management Practices (BMP) for the watershed can be generated in a close loop iterative scheme, until predefined management objectives are achieved. Simulated results showed that the optimal BMP scenario achieved an average reduction of about 41% in soluble and sediment-attached nitrogen and about 62% reduction in soluble and sediment phosphorus from current NPS pollution levels.

  5. software | OpenEI Community

    Open Energy Info (EERE)

    software Home Future of Condition Monitoring for Wind Turbines Description: Research into third party software to aid in the development of better CMS in order to raise turbine...

  6. Aclara Software | Open Energy Information

    Open Energy Info (EERE)

    Aclara Software Jump to: navigation, search Name: Aclara Software Address: 16 Laurel Avenue Place: Wellesley, Massachusetts Zip: 02481 Region: Greater Boston Area Sector:...

  7. PCMDI software system: status and future plans report no. 44

    SciTech Connect (OSTI)

    Williams, Dean N.

    1997-08-01

    This report describes the current status and future plans of PCMDI`s software products. A complete description of each product is provided, including the product`s problem statement, purpose, requirements, design diagram, current status, future development, developers, contributors, and off-site collaborators. While it is noted that each software product can be executed as an independent process, it is important to discern that all products work together in the complete PCMDI Software Systems: A suite of software tools facilitating for the storage, diagnosis, and visualization of climate data.

  8. TacNet Tracker Software

    Energy Science and Technology Software Center (OSTI)

    2008-08-04

    The TacNet Tracker will be used for the monitoring and real-time tracking of personnel and assets in an unlimited number of specific applications. The TacNet Tracker software is a VxWorks Operating System based programming package that controls the functionality for the wearable Tracker. One main use of the TacNet Tracker is in Blue Force Tracking, the ability to track the good guys in an adversarial situation or in a force-on-force or real battle conditions. Themore » purpose of blue force tracking is to provide situational awareness to the battlefield commanders and personnel. There are practical military applications with the TacNet Tracker.The mesh network is a wireless IP communications network that moves data packets from source IP addresses to specific destination IP addresses. Addresses on the TacNet infrastructure utilize an 8-bit network mask (255.0.0.0). In other words, valid TacNet addresses range from 10.0.0.1 to 10.254.254.254. The TacNet software design uses uni-cast transmission techniques because earlier mesh network software releases did not provide for the ability to utilize multi-cast data movement. The TacNet design employs a list of addresses to move information within the TacNet infrastructure. For example, a convoy text file containing the IP addresses of all valid receivers of TacNet information could be used for transmitting the information and for limiting transmission to addresses on the list.« less

  9. Application of GIS in siting of linear facilities

    SciTech Connect (OSTI)

    Gallagher, G.A. III; Heatwole, D.W.; Schmidt, J.A. )

    1993-01-01

    Geographic information systems (GIS) are powerful tools in the analysis and selection of environmentally acceptable corridors for linear facilities, such as roads and utility lines. GIS can serve several functions in corridor siting, including managing and manipulating extensive environmental databases, weighting and compositing data layers to enable spatial analysis for a path of least resistance,'' summarizing statistics for a comparison of alternative corridors, preparing color graphics for presentations and reports, and providing a record of alternative analysis for permitting reviews and legal challenges. In this paper, the authors examine the benefits and limitations of using GIS to site linear facilities, based mainly on their experience in siting a 600-mile natural gas pipeline in Florida. They implemented a phased analytical approach to define acceptable corridors several miles in width and then selected viable routes within the corridors using a magnified scale. This approach resulted in a dynamic siting process which required numerous iterations of analysis. Consequently, their experience has instilled the benefits derived by expending preliminary effort to create macros of the GIS analytical process so that subsequent effort is minimized during numerous iterations of corridor and route refinement.

  10. Fallon FORGE GIS and Downhole Well Lithology Data

    SciTech Connect (OSTI)

    Doug Blankenship

    2015-12-23

    ArcGIS Map Package with MT Station Locations, 2D Seismic Lines, Well data, Known Regional Hydrothermal Systems, Regional Historic Earthquake Seismicity, Regional Temperature Gradient Data, Regional Heat Flow Data, Regional Radiogenic Heat Production, Local Geology, Land Status, Cultural Data, 2m Temperature Probe Data, and Gravity Data. Also a detailed down-hole lithology notes are provided.

  11. Web Mapping and Online GIS Applications for Renewable Energy

    Office of Energy Efficiency and Renewable Energy (EERE)

    Presentation at the May 26, 2010, TAP Webinar presented by the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Weatherization and Intergovernmental Program Technical Assistance Project for state and local officials by National Renewable Energy Laboratory GIS Applications Developers Ted Quinby and Dan Getman.

  12. Software and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software and Tools Software and Tools The table below shows the software installed on Edison that is managed by modules. Package Category Version Module Install Date Date Made Default / 1.0.1 cray-cti/1.0.1 2016-07-21 2016-07-21 / 16.07 cdt/16.07 2016-07-21 A Fortran interface to the GNU Scientific Library (GSL) libraries/ math 1.0.0 fgsl/1.0.0 2015-04-14 2016-08-31 ABINIT applications/ material sciences 7.0.5 abinit/7.0.5 2013-03-12 2013-03-12 ABINIT applications/ material sciences 7.10.2

  13. Software and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tools Software and Tools Chos Chos is used to select your operating system at PDSF. Read More » Modules Module is a system which you can use to specify what software you want to use... Read More » Project Accounts You can use a shared project account to facilitate collaboration... Read More » Checking Quotas To check your quotas use the myquota command... Read More » Accelerating Remote X Performance You can use NX to greatly improve the performance of X window applications. Read More »

  14. Self-assembling software generator

    DOE Patents [OSTI]

    Bouchard, Ann M.; Osbourn, Gordon C.

    2011-11-25

    A technique to generate an executable task includes inspecting a task specification data structure to determine what software entities are to be generated to create the executable task, inspecting the task specification data structure to determine how the software entities will be linked after generating the software entities, inspecting the task specification data structure to determine logic to be executed by the software entities, and generating the software entities to create the executable task.

  15. Iterative software kernels

    SciTech Connect (OSTI)

    Duff, I.

    1994-12-31

    This workshop focuses on kernels for iterative software packages. Specifically, the three speakers discuss various aspects of sparse BLAS kernels. Their topics are: `Current status of user lever sparse BLAS`; Current status of the sparse BLAS toolkit`; and `Adding matrix-matrix and matrix-matrix-matrix multiply to the sparse BLAS toolkit`.

  16. Writing testable software requirements

    SciTech Connect (OSTI)

    Knirk, D.

    1997-11-01

    This tutorial identifies common problems in analyzing requirements in the problem and constructing a written specification of what the software is to do. It deals with two main problem areas: identifying and describing problem requirements, and analyzing and describing behavior specifications.

  17. JSATS Decoder Software Manual

    SciTech Connect (OSTI)

    Flory, Adam E.; Lamarche, Brian L.; Weiland, Mark A.

    2013-05-01

    The Juvenile Salmon Acoustic Telemetry System (JSATS) Decoder is a software application that converts a digitized acoustic signal (a waveform stored in the .bwm file format) into a list of potential JSATS Acoustic MicroTransmitter (AMT) tagcodes along with other data about the signal including time of arrival and signal to noise ratios (SNR). This software is capable of decoding single files, directories, and viewing raw acoustic waveforms. When coupled with the JSATS Detector, the Decoder is capable of decoding in ‘real-time’ and can also provide statistical information about acoustic beacons placed within receive range of hydrophones within a JSATS array. This document details the features and functionality of the software. The document begins with software installation instructions (section 2), followed in order by instructions for decoder setup (section 3), decoding process initiation (section 4), then monitoring of beacons (section 5) using real-time decoding features. The last section in the manual describes the beacon, beacon statistics, and the results file formats. This document does not consider the raw binary waveform file format.

  18. Sandia National Laboratories Advanced Simulation and Computing (ASC) software quality plan : ASC software quality engineering practices Version 3.0.

    SciTech Connect (OSTI)

    Turgeon, Jennifer L.; Minana, Molly A.; Hackney, Patricia; Pilch, Martin M.

    2009-01-01

    The purpose of the Sandia National Laboratories (SNL) Advanced Simulation and Computing (ASC) Software Quality Plan is to clearly identify the practices that are the basis for continually improving the quality of ASC software products. Quality is defined in the US Department of Energy/National Nuclear Security Agency (DOE/NNSA) Quality Criteria, Revision 10 (QC-1) as 'conformance to customer requirements and expectations'. This quality plan defines the SNL ASC Program software quality engineering (SQE) practices and provides a mapping of these practices to the SNL Corporate Process Requirement (CPR) 001.3.6; 'Corporate Software Engineering Excellence'. This plan also identifies ASC management's and the software project teams responsibilities in implementing the software quality practices and in assessing progress towards achieving their software quality goals. This SNL ASC Software Quality Plan establishes the signatories commitments to improving software products by applying cost-effective SQE practices. This plan enumerates the SQE practices that comprise the development of SNL ASC's software products and explains the project teams opportunities for tailoring and implementing the practices.

  19. Purpose

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Magic Arcs - The bottom arc always looks bigger than the top one, yet they are actually the same size. You just can't trust your senses. The secret is that the longer edge of the ...

  20. Purpose

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to achieve the Laboratory mission and strategic objectives. OHAP Outcomes As part of the Strategic Planning and Goal Setting process, laboratory management annually reviews...

  1. GIS applications to evaluate public health effects of global warming

    SciTech Connect (OSTI)

    Regens, J.L.; Hodges, D.G.

    1996-12-31

    Modeling projections of future climatic conditions suggest changes in temperature and precipitation patterns that might induce direct adverse effects on human health by altering the extent and severity of infectious and vector-borne diseases. The incidence of mosquito-borne diseases, for example, could increase substantially in areas where temperature and relative humidity rise. The application of Geographic Information Systems (GIS) offers new methodologies to evaluate the impact of global warming on changes in the incidence of infectious and vector-borne diseases. This research illustrates the potential analytical and communication uses of GIS for monitoring historical patterns of climate and human health variables and for projecting changes in these health variables with global warming.

  2. Unified Parallel Software

    Energy Science and Technology Software Center (OSTI)

    2003-12-01

    UPS (Unified Paralled Software is a collection of software tools libraries, scripts, executables) that assist in parallel programming. This consists of: o libups.a C/Fortran callable routines for message passing (utilities written on top of MPI) and file IO (utilities written on top of HDF). o libuserd-HDF.so EnSight user-defined reader for visualizing data files written with UPS File IO. o ups_libuserd_query, ups_libuserd_prep.pl, ups_libuserd_script.pl Executables/scripts to get information from data files and to simplify the use ofmore » EnSight on those data files. o ups_io_rm/ups_io_cp Manipulate data files written with UPS File IO These tools are portable to a wide variety of Unix platforms.« less

  3. Prediction of the visual impact of motorways using GIS

    SciTech Connect (OSTI)

    Jiang, Like; Kang, Jian; Schroth, Olaf

    2015-11-15

    Large scale transportation projects can adversely affect the visual perception of environmental quality and require adequate visual impact assessment. In this study, we investigated the effects of the characteristics of the road project and the character of the existing landscape on the perceived visual impact of motorways, and developed a GIS-based prediction model based on the findings. An online survey using computer-visualised scenes of different motorway and landscape scenarios was carried out to obtain perception-based judgements on the visual impact. Motorway scenarios simulated included the baseline scenario without road, original motorway, motorways with timber noise barriers, transparent noise barriers and tree screen; different landscape scenarios were created by changing land cover of buildings and trees in three distance zones. The landscape content of each scene was measured in GIS. The result shows that presence of a motorway especially with the timber barrier significantly decreases the visual quality of the view. The resulted visual impact tends to be lower where it is less visually pleasant with more buildings in the view, and can be slightly reduced by the visual absorption effect of the scattered trees between the motorway and the viewpoint. Based on the survey result, eleven predictors were identified for the visual impact prediction model which was applied in GIS to generate maps of visual impact of motorways in different scenarios. The proposed prediction model can be used to achieve efficient and reliable assessment of visual impact of motorways. - Highlights: • Motorways induce significant visual impact especially with timber noise barriers. • Visual impact is negatively correlated with amount of buildings in the view. • Visual impact is positively correlated with percentage of trees in the view. • Perception-based motorway visual impact prediction model using mapped predictors • Predicted visual impacts in different scenarios are

  4. Applied Math & Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Math & Software - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Energy Defense Waste Management Programs Advanced Nuclear

  5. CACTUS Software Download

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CACTUS Software Download - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Energy Defense Waste Management Programs Advanced

  6. Tax Deduction Qualified Software - IES Version 2014 Software | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Version 2014 Software Tax Deduction Qualified Software - IES <Virtual Environment> Version 2014 Software On this page you'll find information about the IES <Virtual Environment> version 2014 Qualified Software for Calculating Commercial Building Tax Deductions, which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings. IES <Virtual Environment> version 2014 (135.68 KB) More Documents & Publications Tax

  7. Radiological Survey Tool Set for ArcGIS 8.3 and ArcPad 6.0

    SciTech Connect (OSTI)

    ROGER, COTTRELL

    2004-11-30

    The Radiological Control Operations (RCO) group at the Savannah River Site (SRS) is tasked with conducting routine surveys for the detection of radiological contaminants in the environment. The Radiological Survey Tool Set (RSTS) was developed by the Environmental & Geographic Information Systems (EGIS) group of SRS to assist RCO personnel in this survey process. The tool set consists of two major components. The first component is a custom extension for ArcGIS 8.3 that allows the user to interactively create a sampling plan prior to entering the field. Additionally, the extension allows the user to upload field-collected data to the GIS with post-processing functionality. The second component is a custom ArcPad 6.0 applet. This applet provides the user with navigational capabilities to a selected origin point with the help of Global Positioning Systems (GPS) technology, and the recording of the sample data results into a hand-held field computer via ArcPad 6.0 software.

  8. SHM Data Sets and Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SHM Data Sets and Software SHM Data Sets and Software SHM Data Sets and Software Contact Institute Director Charles Farrar (505) 665-0860 Email UCSD EI Director Michael Todd (858) 534-5951 Executive Administrator Ellie Vigil (505) 667-2818 Email Administrative Assistant Rebecca Duran (505) 665-8899 Email SHMTools Software (0.2.0 Beta) SHMTools is a MATLAB package that facilitates the construction of structural health monitoring (SHM) processes. The package provides a set of functions organized

  9. Software Verification and Validation Procedure

    SciTech Connect (OSTI)

    Olund, Thomas S.

    2008-09-15

    This Software Verification and Validation procedure provides the action steps for the Tank Waste Information Network System (TWINS) testing process. The primary objective of the testing process is to provide assurance that the software functions as intended, and meets the requirements specified by the client. Verification and validation establish the primary basis for TWINS software product acceptance.

  10. Technical Meeting: Software Framework for Transactive Energy: VOLTTRON(tm)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2015 | Department of Energy Energy: VOLTTRON(tm) 2015 Technical Meeting: Software Framework for Transactive Energy: VOLTTRON(tm) 2015 On July 23 and 24, 2015, BTO held technical meetings graciously hosted by the Virginia Tech Advanced Research Institute on a Software Framework for Transactive Energy: VOLTTRON(tm). The purpose of this meeting was to provide an overview of the VOLTTRON platform, present new developments and uses, discuss advancement of the Transactional Network concept, and

  11. Scalable System Software for Performance and Productivity | Argonne

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Leadership Computing Facility 2 Research Domain: Computer Science As hardware complexity skyrockets in high-end computing systems, it is not easy for applications to take complete advantage of the available system resources and avoid potential bottlenecks. The purpose of this project is to improve the performance and productivity of key system software components on these leadership-class platforms. Researchers are studying four different classes of system software: Message Passing

  12. DEVELOPMENT OF A CARBON MANAGEMENT GEOGRAPHIC INFORMATION SYSTEM (GIS) FOR THE UNITED STATES

    SciTech Connect (OSTI)

    Howard J. Herzog

    2004-03-01

    The Lab for Energy and Environment (LFEE) at MIT is developing a Geographic Information System (GIS) for carbon management. The GIS will store, integrate, and manipulate information relating to the components of carbon management systems. Additionally, the GIS can be used to interpret and analyze the effect of developing these systems. In the first year of this three year project, we focused on two tasks: (1) specifying the system design--defining in detail the GIS data requirements, the types of analyses that can be conducted, and the forms of output we will produce, as well as designing the computer architecture of the GIS and (2) creating the ''core'' datasets--identifying data sources and converting them into a form accessible by the GIS.

  13. Applying Agile MethodstoWeapon/Weapon-Related Software

    SciTech Connect (OSTI)

    Adams, D; Armendariz, M; Blackledge, M; Campbell, F; Cloninger, M; Cox, L; Davis, J; Elliott, M; Granger, K; Hans, S; Kuhn, C; Lackner, M; Loo, P; Matthews, S; Morrell, K; Owens, C; Peercy, D; Pope, G; Quirk, R; Schilling, D; Stewart, A; Tran, A; Ward, R; Williamson, M

    2007-05-02

    This white paper provides information and guidance to the Department of Energy (DOE) sites on Agile software development methods and the impact of their application on weapon/weapon-related software development. The purpose of this white paper is to provide an overview of Agile methods, examine the accepted interpretations/uses/practices of these methodologies, and discuss the applicability of Agile methods with respect to Nuclear Weapons Complex (NWC) Technical Business Practices (TBPs). It also provides recommendations on the application of Agile methods to the development of weapon/weapon-related software.

  14. JeoViewer: Object-Oriented GIS Framework | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    JeoViewer: Object-Oriented GIS Framework JeoViewer: Object-Oriented GIS Framework JeoViewer is an intelligent, object-oriented geographical information system (GIS) framework written in Java. It can provide links to any object's data and behaviors, and is optimized for spatial geometry representation. Unlike traditional "static" GIS systems, JeoViewer is dynamic and can be dynamically linked to objects, models and other live data streams. JeoViewer's object-oriented approach provides a

  15. Nexus Energy Software Inc | Open Energy Information

    Open Energy Info (EERE)

    Nexus Energy Software Inc Jump to: navigation, search Name: Nexus Energy Software Inc Place: Wellesley, Massachusetts Zip: 2481 Product: Nexus Energy Software is a provider of...

  16. ESP Environmental Software Providers | Open Energy Information

    Open Energy Info (EERE)

    ESP Environmental Software Providers Jump to: navigation, search Name: ESP (Environmental Software Providers) Place: California Zip: CA 94041 Product: ESP(tm)s software...

  17. Gemini Scout Control Software

    Energy Science and Technology Software Center (OSTI)

    2010-11-23

    The Gemini Scout Control Software consists of two Windows applications that allow the Gemini Scout vehicle to be controlled by an operator. The Embedded application runs on the vehicle's Gemini Scout Control Software onboard computer and controls the vehicle's various motors and sensors. This application reports the vehicle's status and receives vehicle commands overthe local-area-network. The Embedded applicationalso allows the user to control the vehicle using a USB game-pad connected directly to the vehicle. Themore » Operator Control Unit (OCU) application runs on an external PC and communicates with the vehicle via an Ethernet connection. The OCU application sends commands to and receives data from the Embedded application running on the vehicle. The OCU application also communicates directly with the digital video encoders and radios in order to display video from the vehicle's cameras and the status of the radio link. The OCU application has a graphical user interface (GUI) that displays the vehicle's status and allows the user to change various vehicle settings. Finally, the OCU application receives input from a USB game-pad connected to the PC in order to control the vehicle's functions.« less

  18. Switchover software reliability estimate for Paducah Freezer/Sublimer computer systems

    SciTech Connect (OSTI)

    Flanagan, D.M.; Davis, J.N.

    1993-04-01

    K-25 Engineering Division purchased a series of redundant computer systems and developed software for the purpose of providing continuous process monitoring and control for the Freezer/Sublimer equipment in the gaseous diffusion process at the Paducah Gaseous Diffusion Plant. The application software is loaded on two central processing units (CPU) so that in the event of a failure of the primary unit, the processing can switch to the backup unit and continue processing without error. It is the purpose of this document to demonstrate the reliability of this system with respect to its ability to switch properly between redundant CPU. The total reliability estimation problem -- which considers the computer hardware, the operating system software, and the application software -- has been reduced to one that considers only the application software directly involved in the switchover process. Estimates are provided for software reliability and the testing coverage. Software and hardware reliability models and reliability growth models are considered in addition to Bayesian approaches.

  19. A GIS approach to cultural resources management and NEPA compliance

    SciTech Connect (OSTI)

    Moeller, K.

    1996-06-01

    Cultural resources management and historic preservation compliance are best approached within the broader framework of natural resources planning and land management. Argonne National Laboratory is currently assisting federal agencies with the development of computer- based resource management systems for large facilities, and cultural resources management and preservation are components of these systems. In the area of cultural resources, Argonne is using the GIS tool to demonstrate how federal facilities can manage large, complex databases, integrate cultural resource data with other environmental variables, model distributions of resources to aid in inventory and evaluation, link the data to quantitative and impact modes, and effectively manage and monitor resource planning activities and environmental compliance.

  20. Web-GIS oriented systems viability for municipal solid waste selective collection optimization in developed and transient economies

    SciTech Connect (OSTI)

    Rada, E.C.; Ragazzi, M.; Fedrizzi, P.

    2013-04-15

    Highlights: ► As an appropriate solution for MSW management in developed and transient countries. ► As an option to increase the efficiency of MSW selective collection. ► As an opportunity to integrate MSW management needs and services inventories. ► As a tool to develop Urban Mining actions. - Abstract: Municipal solid waste management is a multidisciplinary activity that includes generation, source separation, storage, collection, transfer and transport, processing and recovery, and, last but not least, disposal. The optimization of waste collection, through source separation, is compulsory where a landfill based management must be overcome. In this paper, a few aspects related to the implementation of a Web-GIS based system are analyzed. This approach is critically analyzed referring to the experience of two Italian case studies and two additional extra-European case studies. The first case is one of the best examples of selective collection optimization in Italy. The obtained efficiency is very high: 80% of waste is source separated for recycling purposes. In the second reference case, the local administration is going to be faced with the optimization of waste collection through Web-GIS oriented technologies for the first time. The starting scenario is far from an optimized management of municipal solid waste. The last two case studies concern pilot experiences in China and Malaysia. Each step of the Web-GIS oriented strategy is comparatively discussed referring to typical scenarios of developed and transient economies. The main result is that transient economies are ready to move toward Web oriented tools for MSW management, but this opportunity is not yet well exploited in the sector.

  1. Wrapper Induction Software

    SciTech Connect (OSTI)

    2011-08-18

    Wrapper Induction is a software package that allows for unsupervised, semi-supervised, and manual extraction of social media data independent of language or site architecture. A large range of blog formats is available to individuals as means of publishing data to the internet. Blogs are a source of rich information for analysts. With a growing volume of information and blog engines, there is an increased need for automatic or semi-automatic extraction of that data for processing to help deliver results to analysts. Wrapper Induction is designed to automatically or semi-automatically create a template that can be used to harvest blog data from websites. Blogs are in a variety of formats and languages. Wrapper Induction creates a template and extracts blog data in a way that is independent of a specified blog format or language.

  2. Wrapper Induction Software

    Energy Science and Technology Software Center (OSTI)

    2011-08-18

    Wrapper Induction is a software package that allows for unsupervised, semi-supervised, and manual extraction of social media data independent of language or site architecture. A large range of blog formats is available to individuals as means of publishing data to the internet. Blogs are a source of rich information for analysts. With a growing volume of information and blog engines, there is an increased need for automatic or semi-automatic extraction of that data for processingmore » to help deliver results to analysts. Wrapper Induction is designed to automatically or semi-automatically create a template that can be used to harvest blog data from websites. Blogs are in a variety of formats and languages. Wrapper Induction creates a template and extracts blog data in a way that is independent of a specified blog format or language.« less

  3. Energy Tracking Software Platform

    SciTech Connect (OSTI)

    Ryan Davis; Nathan Bird; Rebecca Birx; Hal Knowles

    2011-04-04

    Acceleration has created an interactive energy tracking and visualization platform that supports decreasing electric, water, and gas usage. Homeowners have access to tools that allow them to gauge their use and track progress toward a smaller energy footprint. Real estate agents have access to consumption data, allowing for sharing a comparison with potential home buyers. Home builders have the opportunity to compare their neighborhood's energy efficiency with competitors. Home energy raters have a tool for gauging the progress of their clients after efficiency changes. And, social groups are able to help encourage members to reduce their energy bills and help their environment. EnergyIT.com is the business umbrella for all energy tracking solutions and is designed to provide information about our energy tracking software and promote sales. CompareAndConserve.com (Gainesville-Green.com) helps homeowners conserve energy through education and competition. ToolsForTenants.com helps renters factor energy usage into their housing decisions.

  4. Software-Defined Networking (SDN)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ENOS Experimental Network Testbeds Performance (perfSONAR) Software & Tools Development Data for Researchers Partnerships Publications Workshops Science Engagement Move your data Programs & Workshops Science Requirements Reviews Case Studies News & Publications ESnet News Publications and Presentations Galleries ESnet Awards and Honors Blog ESnet Live Home » Network R&D » Software-Defined Networking (SDN) Network R&D Software-Defined Networking (SDN) ENOS Experimental

  5. Software and High Performance Computing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software and High Performance Computing Software and High Performance Computing Providing world-class high performance computing capability that enables unsurpassed solutions to complex problems of strategic national interest Contact thumbnail of Kathleen McDonald Head of Intellectual Property, Business Development Executive Kathleen McDonald Richard P. Feynman Center for Innovation (505) 667-5844 Email Software Computational physics, computer science, applied mathematics, statistics and the

  6. GIS-BASED PREDICTION OF HURRICANE FLOOD INUNDATION

    SciTech Connect (OSTI)

    JUDI, DAVID; KALYANAPU, ALFRED; MCPHERSON, TIMOTHY; BERSCHEID, ALAN

    2007-01-17

    A simulation environment is being developed for the prediction and analysis of the inundation consequences for infrastructure systems from extreme flood events. This decision support architecture includes a GIS-based environment for model input development, simulation integration tools for meteorological, hydrologic, and infrastructure system models and damage assessment tools for infrastructure systems. The GIS-based environment processes digital elevation models (30-m from the USGS), land use/cover (30-m NLCD), stream networks from the National Hydrography Dataset (NHD) and soils data from the NRCS (STATSGO) to create stream network, subbasins, and cross-section shapefiles for drainage basins selected for analysis. Rainfall predictions are made by a numerical weather model and ingested in gridded format into the simulation environment. Runoff hydrographs are estimated using Green-Ampt infiltration excess runoff prediction and a 1D diffusive wave overland flow routing approach. The hydrographs are fed into the stream network and integrated in a dynamic wave routing module using the EPA's Storm Water Management Model (SWMM) to predict flood depth. The flood depths are then transformed into inundation maps and exported for damage assessment. Hydrologic/hydraulic results are presented for Tropical Storm Allison.

  7. Confined Space Imager (CSI) Software

    SciTech Connect (OSTI)

    Karelilz, David

    2013-07-03

    The software provides real-time image capture, enhancement, and display, and sensor control for the Confined Space Imager (CSI) sensor system The software captures images over a Cameralink connection and provides the following image enhancements: camera pixel to pixel non-uniformity correction, optical distortion correction, image registration and averaging, and illumination non-uniformity correction. The software communicates with the custom CSI hardware over USB to control sensor parameters and is capable of saving enhanced sensor images to an external USB drive. The software provides sensor control, image capture, enhancement, and display for the CSI sensor system. It is designed to work with the custom hardware.

  8. Software & Downloads | Open Energy Information

    Open Energy Info (EERE)

    Wind Industry Careers Skystream 3.7 Downloads These resources require a Windows computer. Skyview is the manufacturer-provided wind turbine communication software. It is...

  9. HMX Cooling Core Optimization Software

    Energy Science and Technology Software Center (OSTI)

    2006-08-31

    The Software consists of code which is used to determine the optimal configuration of an HMX cooling core in a heat exchanger.

  10. More Mac software and connections

    SciTech Connect (OSTI)

    Busbey, A.B.

    1988-11-01

    This column briefly reviews several geologic software packaged designed for Apple Macintosh. In addition, it discusses methods of networking Apple Macintosh computers.

  11. AIRMaster+ Software | Open Energy Information

    Open Energy Info (EERE)

    Policies: Deployment Programs DeploymentPrograms: Technical Assistance AIRMaster+ is a free online software tool that helps users analyse energy use and savings opportunities in...

  12. SUNREL Software - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Return to Search SUNREL Software An energy simulation program to aid in the design of energy-efficient residential buildings National Renewable Energy Laboratory Contact NREL About ...

  13. Integrating multi-criteria decision analysis for a GIS-based hazardous waste landfill sitting in Kurdistan Province, western Iran

    SciTech Connect (OSTI)

    Sharifi, Mozafar Hadidi, Mosslem Vessali, Elahe Mosstafakhani, Parasto Taheri, Kamal Shahoie, Saber Khodamoradpour, Mehran

    2009-10-15

    The evaluation of a hazardous waste disposal site is a complicated process because it requires data from diverse social and environmental fields. These data often involve processing of a significant amount of spatial information which can be used by GIS as an important tool for land use suitability analysis. This paper presents a multi-criteria decision analysis alongside with a geospatial analysis for the selection of hazardous waste landfill sites in Kurdistan Province, western Iran. The study employs a two-stage analysis to provide a spatial decision support system for hazardous waste management in a typically under developed region. The purpose of GIS was to perform an initial screening process to eliminate unsuitable land followed by utilization of a multi-criteria decision analysis (MCDA) to identify the most suitable sites using the information provided by the regional experts with reference to new chosen criteria. Using 21 exclusionary criteria, as input layers, masked maps were prepared. Creating various intermediate or analysis map layers a final overlay map was obtained representing areas for hazardous waste landfill sites. In order to evaluate different landfill sites produced by the overlaying a landfill suitability index system was developed representing cumulative effects of relative importance (weights) and suitability values of 14 non-exclusionary criteria including several criteria resulting from field observation. Using this suitability index 15 different sites were visited and based on the numerical evaluation provided by MCDA most suitable sites were determined.

  14. Geotechnical Seismic Hazard Evaluation At Sellano (Umbria, Italy) Using The GIS Technique

    SciTech Connect (OSTI)

    Capilleri, P.; Maugeri, M.

    2008-07-08

    A tool that has been widely-used in civil engineering in recent years is the geographic information system (GIS). Geographic Information systems (GIS) are powerful tools for organizing, analyzing, and presenting spatial data. The GIS can be used by geotechnical engineers to aid preliminary assessment through to the final geotechnical design. The aim of this work is to provide some indications for the use of the GIS technique in the field of seismic geotechnical engineering, particularly as regards the problems of seismic hazard zonation maps. The study area is the village of Sellano located in the Umbrian Apennines in central Italy, about 45 km east of Perugia and 120 km north-east of Rome The increasing importance attributed to microzonation derives from the spatial variability of ground motion due to particular local conditions. The use of GIS tools can lead to an early identification of potential barriers to project completion during the design process that may help avoid later costly redesign.

  15. Parallel time integration software

    Energy Science and Technology Software Center (OSTI)

    2014-07-01

    This package implements an optimal-scaling multigrid solver for the (non) linear systems that arise from the discretization of problems with evolutionary behavior. Typically, solution algorithms for evolution equations are based on a time-marching approach, solving sequentially for one time step after the other. Parallelism in these traditional time-integrarion techniques is limited to spatial parallelism. However, current trends in computer architectures are leading twards system with more, but not faster. processors. Therefore, faster compute speeds mustmore » come from greater parallelism. One approach to achieve parallelism in time is with multigrid, but extending classical multigrid methods for elliptic poerators to this setting is a significant achievement. In this software, we implement a non-intrusive, optimal-scaling time-parallel method based on multigrid reduction techniques. The examples in the package demonstrate optimality of our multigrid-reduction-in-time algorithm (MGRIT) for solving a variety of parabolic equations in two and three sparial dimensions. These examples can also be used to show that MGRIT can achieve significant speedup in comparison to sequential time marching on modern architectures.« less

  16. General purpose programmable accelerator board

    DOE Patents [OSTI]

    Robertson, Perry J.; Witzke, Edward L.

    2001-01-01

    A general purpose accelerator board and acceleration method comprising use of: one or more programmable logic devices; a plurality of memory blocks; bus interface for communicating data between the memory blocks and devices external to the board; and dynamic programming capabilities for providing logic to the programmable logic device to be executed on data in the memory blocks.

  17. Software Platform Evaluation - Verifiable Fuel Cycle Simulation (VISION) Model

    SciTech Connect (OSTI)

    J. J. Jacobson; D. E. Shropshire; W. B. West

    2005-11-01

    The purpose of this Software Platform Evaluation (SPE) is to document the top-level evaluation of potential software platforms on which to construct a simulation model that satisfies the requirements for a Verifiable Fuel Cycle Simulation Model (VISION) of the Advanced Fuel Cycle (AFC). See the Software Requirements Specification for Verifiable Fuel Cycle Simulation (VISION) Model (INEEL/EXT-05-02643, Rev. 0) for a discussion of the objective and scope of the VISION model. VISION is intended to serve as a broad systems analysis and study tool applicable to work conducted as part of the AFCI (including costs estimates) and Generation IV reactor development studies. This document will serve as a guide for selecting the most appropriate software platform for VISION. This is a “living document” that will be modified over the course of the execution of this work.

  18. Records Inventory Data Collection Software

    Energy Science and Technology Software Center (OSTI)

    1995-03-01

    DATALINK was created to provide an easy to use data collection program for records management software products. It provides several useful tools for capturing and validating record index data in the field. It also allows users to easily create a comma delimited, ASCII text file for data export into most records management software products.

  19. X-Ray Analysis Software

    Energy Science and Technology Software Center (OSTI)

    2007-03-09

    XRAYS is a suite of prgrams related to scientific software in general and exray and neutron scattering problems in particular. It is expected to bean ongoing progam involving collaboration with other facilities. It is expected to include legacy and other existing software as well as new applications and new interfaces for existing applications.

  20. Software Requirements Specification Verifiable Fuel Cycle Simulation (VISION) Model

    SciTech Connect (OSTI)

    D. E. Shropshire; W. H. West

    2005-11-01

    The purpose of this Software Requirements Specification (SRS) is to define the top-level requirements for a Verifiable Fuel Cycle Simulation Model (VISION) of the Advanced Fuel Cycle (AFC). This simulation model is intended to serve a broad systems analysis and study tool applicable to work conducted as part of the AFCI (including costs estimates) and Generation IV reactor development studies.

  1. Self-assembled software and method of overriding software execution

    DOE Patents [OSTI]

    Bouchard, Ann M.; Osbourn, Gordon C.

    2013-01-08

    A computer-implemented software self-assembled system and method for providing an external override and monitoring capability to dynamically self-assembling software containing machines that self-assemble execution sequences and data structures. The method provides an external override machine that can be introduced into a system of self-assembling machines while the machines are executing such that the functionality of the executing software can be changed or paused without stopping the code execution and modifying the existing code. Additionally, a monitoring machine can be introduced without stopping code execution that can monitor specified code execution functions by designated machines and communicate the status to an output device.

  2. West Flank Coso, CA FORGE ArcGIS data 2

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Doug Blankenship

    2016-03-01

    archive of ArcGIS data from the West Flank FORGE site located in Coso, California. Archive contains: 8 shapefiles polygon of the 3D geologic model polylines of the traces 3D modeled faults polylines of the fault traces from Duffield and Bacon, 1980 polygon of the West Flank FORGE site polylines of the traces of the geologic cross-sections (cross-sections in a separate archive in the GDR) polylines of the traces of the seismic reflection profiles through and adjacent to the West Flank site (seismic reflection profiles in a separate archive in the GDR) points of the well collars in and around the West Flank site polylines of the surface expression of the West Flank well paths

  3. EDS operator and control software

    SciTech Connect (OSTI)

    Ott, L.L.

    1985-04-01

    The Enrichment Diagnostic System (EDS) was developed at Lawrence Livermore National Laboratory (LLNL) to acquire, display and analyze large quantities of transient data for a real-time Advanced Vapor Laser Isotope Separation (AVLIS) experiment. Major topics discussed in this paper are the EDS operator interface (SHELL) program, the data acquisition and analysis scheduling software, and the graphics software. The workstation concept used in EDS, the software used to configure a user's workstation, and the ownership and management of a diagnostic are described. An EDS diagnostic is a combination of hardware and software designed to study specific aspects of the process. Overall system performance is discussed from the standpoint of scheduling techniques, evaluation tools, optimization techniques, and program-to-program communication methods. EDS is based on a data driven design which keeps the need to modify software to a minimum. This design requires a fast and reliable data base management system. A third party data base management product, Berkeley Software System Database, written explicitly for HP1000's, is used for all EDS data bases. All graphics is done with an in-house graphics product, Device Independent Graphics Library (DIGLIB). Examples of devices supported by DIGLIB are: Versatec printer/plotters, Raster Technologies Graphic Display Controllers, and HP terminals (HP264x and HP262x). The benefits derived by using HP hardware and software as well as obstacles imposed by the HP environment are presented in relation to EDS development and implementation.

  4. RELAP-7 SOFTWARE VERIFICATION AND VALIDATION PLAN

    SciTech Connect (OSTI)

    Smith, Curtis L; Choi, Yong-Joon; Zou, Ling

    2014-09-01

    This INL plan comprehensively describes the software for RELAP-7 and documents the software, interface, and software design requirements for the application. The plan also describes the testing-based software verification and validation (SV&V) process—a set of specially designed software models used to test RELAP-7.

  5. Facility Software Quality Assurance (SQA) for Captal Project Critical Decisions RM

    Broader source: Energy.gov [DOE]

    The purpose of this Software Quality Assurance for Capital Project Critical Decision Review Module (SQA RM) is to identify, integrate, and clarify, in one EM document, the SQA performance...

  6. Preparation and Execution of the GIS First Overhaul for Qinshan NPP Phase One

    SciTech Connect (OSTI)

    Kaihong Lou; Jiapeng Yan

    2006-07-01

    This paper addresses the necessity and feasibility of the first major overhaul on the GIS based on the analysis of the special conditions and the issues we confronted; After the comparison of various schemes, the optimized scheme is put forward; the paper also expounds the proper preparation and cautious practice which led to the hard but final accomplishment of the initial overhaul on the GIS; this article further explains the necessity of the major overhaul on the GIS through the disposal of abnormalities during the execution of this major overhaul. (authors)

  7. DOE Workshop Overview and Purpose

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4/13/2016 eere.energy.gov DOE Workshop Overview and Purpose Workshop on Gas Clean-Up for Fuel Cell Applications 3/6/2014, Argonne National Laboratory Dr. Dimitrios Papageorgopoulos Fuel Cells Program Manager Fuel Cell Technologies Office U.S. Department of Energy 2 | Fuel Cell Technologies Office eere.energy.gov Fuel Cells Overview and Benefits The Role of Fuel Cells Key Benefits Very High Efficiency Reduced CO 2 Emissions * 35-50%+ reductions for CHP systems (>80% with biogas) * 55-90%

  8. DC Pro Software Tool Suite

    SciTech Connect (OSTI)

    2009-04-01

    This fact sheet describes how DOE's Data Center Energy Profiler (DC Pro) Software Tool Suite and other resources can help U.S. companies identify ways to improve the efficiency of their data centers.

  9. Confined Space Imager (CSI) Software

    Energy Science and Technology Software Center (OSTI)

    2013-07-03

    The software provides real-time image capture, enhancement, and display, and sensor control for the Confined Space Imager (CSI) sensor system The software captures images over a Cameralink connection and provides the following image enhancements: camera pixel to pixel non-uniformity correction, optical distortion correction, image registration and averaging, and illumination non-uniformity correction. The software communicates with the custom CSI hardware over USB to control sensor parameters and is capable of saving enhanced sensor images to anmore » external USB drive. The software provides sensor control, image capture, enhancement, and display for the CSI sensor system. It is designed to work with the custom hardware.« less

  10. HOMER® Energy Modeling Software 2003

    Energy Science and Technology Software Center (OSTI)

    2003-12-31

    The HOMER® energy modeling software is a tool for designing and analyzing hybrid power systems, which contain a mix of conventional generators, cogeneration, wind turbines, solar photovoltaic, hydropower, batteries, fuel cells, hydropower, biomass and other inputs.

  11. Managing risk in software systems

    SciTech Connect (OSTI)

    Fletcher, S.K.; Jansma, R.M.; Murphy, M.D.

    1995-07-01

    A methodology for risk management in the design of software systems is presented. It spans security, safety, and correct operation of software within the context of its environment, and produces a risk analysis and documented risk management strategy. It is designed to be iteratively applied, to attain appropriate levels of detail throughout the analysis. The methodology and supporting tools are discussed. The methodology is critiqued relative to other research in the field. Some sample applications of the methodology are presented.

  12. Pybus -- A Python Software Bus

    SciTech Connect (OSTI)

    Lavrijsen, Wim T.L.P.

    2004-10-14

    A software bus, just like its hardware equivalent, allows for the discovery, installation, configuration, loading, unloading, and run-time replacement of software components, as well as channeling of inter-component communication. Python, a popular open-source programming language, encourages a modular design on software written in it, but it offers little or no component functionality. However, the language and its interpreter provide sufficient hooks to implement a thin, integral layer of component support. This functionality can be presented to the developer in the form of a module, making it very easy to use. This paper describes a Pythonmodule, PyBus, with which the concept of a ''software bus'' can be realized in Python. It demonstrates, within the context of the ATLAS software framework Athena, how PyBus can be used for the installation and (run-time) configuration of software, not necessarily Python modules, from a Python application in a way that is transparent to the end-user.

  13. Sandia National Laboratories Advanced Simulation and Computing (ASC) software quality plan. Part 1 : ASC software quality engineering practices version 1.0.

    SciTech Connect (OSTI)

    Minana, Molly A.; Sturtevant, Judith E.; Heaphy, Robert; Hodges, Ann Louise; Boucheron, Edward A.; Drake, Richard Roy; Forsythe, Christi A.; Schofield, Joseph Richard, Jr.; Pavlakos, Constantine James; Williamson, Charles Michael; Edwards, Harold Carter

    2005-01-01

    The purpose of the Sandia National Laboratories (SNL) Advanced Simulation and Computing (ASC) Software Quality Plan is to clearly identify the practices that are the basis for continually improving the quality of ASC software products. Quality is defined in DOE/AL Quality Criteria (QC-1) as conformance to customer requirements and expectations. This quality plan defines the ASC program software quality practices and provides mappings of these practices to the SNL Corporate Process Requirements (CPR 1.3.2 and CPR 1.3.6) and the Department of Energy (DOE) document, ASCI Software Quality Engineering: Goals, Principles, and Guidelines (GP&G). This quality plan identifies ASC management and software project teams' responsibilities for cost-effective software engineering quality practices. The SNL ASC Software Quality Plan establishes the signatories commitment to improving software products by applying cost-effective software engineering quality practices. This document explains the project teams opportunities for tailoring and implementing the practices; enumerates the practices that compose the development of SNL ASC's software products; and includes a sample assessment checklist that was developed based upon the practices in this document.

  14. Development of a Carbon Management Geographic Information System (GIS) for the United States

    SciTech Connect (OSTI)

    Howard Herzog; Holly Javedan

    2009-12-31

    In this project a Carbon Management Geographical Information System (GIS) for the US was developed. The GIS stored, integrated, and manipulated information relating to the components of carbon management systems. Additionally, the GIS was used to interpret and analyze the effect of developing these systems. This report documents the key deliverables from the project: (1) Carbon Management Geographical Information System (GIS) Documentation; (2) Stationary CO{sub 2} Source Database; (3) Regulatory Data for CCS in United States; (4) CO{sub 2} Capture Cost Estimation; (5) CO{sub 2} Storage Capacity Tools; (6) CO{sub 2} Injection Cost Modeling; (7) CO{sub 2} Pipeline Transport Cost Estimation; (8) CO{sub 2} Source-Sink Matching Algorithm; and (9) CO{sub 2} Pipeline Transport and Cost Model.

  15. U.S. Renewable Energy Technical Potentials: A GIS-Based Analysis...

    Open Energy Info (EERE)

    Renewable Energy Technical Potentials: A GIS-Based Analysis Jump to: navigation, search OpenEI Reference LibraryAdd to library Report: U.S. Renewable Energy Technical Potentials: A...

  16. New Mexico Play Fairway Analysis: Particle Tracking ArcGIS Map Packages

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Jeff Pepin

    2015-11-15

    These are map packages used to visualize geochemical particle-tracking analysis results in ArcGIS. It includes individual map packages for several regions of New Mexico including: Acoma, Rincon, Gila, Las Cruces, Socorro and Truth or Consequences.

  17. Software Engineer (CODAC) | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software Engineer (CODAC) Department: Information Technology Supervisor(s): Bill Davis ... This Software Engineer position is with the CODAC group, responsible for the development ...

  18. Software Engineer (Scientific Application) | Princeton Plasma...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software Engineer (Scientific Application) Department: Information Technology Staff: ENG ... This Scientific Applications Software Engineer position is with the Controls and Data ...

  19. Improving CSE Software through Reproducibility Requirements....

    Office of Scientific and Technical Information (OSTI)

    Improving CSE Software through Reproducibility Requirements. Citation Details In-Document Search Title: Improving CSE Software through Reproducibility Requirements. Abstract not ...

  20. Duty Cycle Software - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Find More Like This Return to Search Duty Cycle Software National Renewable Energy ... NREL scientists have created unique software to analyze large amounts of data, which ...

  1. Open Source Software | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Open Source Software TDC encourages Argonne authors to post on the GitHub platform to facilitate transfer of open source software.

  2. Hara Software Inc | Open Energy Information

    Open Energy Info (EERE)

    Software Inc Jump to: navigation, search Name: Hara Software Inc Place: Menlo Park, California Zip: 94025 Product: California-based venture capital funded developer of energy and...

  3. SAPHIRE 8 Software Acceptance Test Plan

    SciTech Connect (OSTI)

    Ted S. Wood; Curtis L. Smith

    2009-07-01

    This document describe & report the overall SAPHIRE 8 Software acceptance test paln to offically release the SAPHIRE version 8 software to the NRC custoer for distribution.

  4. SU-E-P-43: A Knowledge Based Approach to Guidelines for Software Safety

    SciTech Connect (OSTI)

    Salomons, G; Kelly, D

    2015-06-15

    Purpose: In the fall of 2012, a survey was distributed to medical physicists across Canada. The survey asked the respondents to comment on various aspects of software development and use in their clinic. The survey revealed that most centers employ locally produced (in-house) software of some kind. The respondents also indicated an interest in having software guidelines, but cautioned that the realities of cancer clinics include variations, that preclude a simple solution. Traditional guidelines typically involve periodically repeating a set of prescribed tests with defined tolerance limits. However, applying a similar formula to software is problematic since it assumes that the users have a perfect knowledge of how and when to apply the software and that if the software operates correctly under one set of conditions it will operate correctly under all conditions Methods: In the approach presented here the personnel involved with the software are included as an integral part of the system. Activities performed to improve the safety of the software are done with both software and people in mind. A learning oriented approach is taken, following the premise that the best approach to safety is increasing the understanding of those associated with the use or development of the software. Results: The software guidance document is organized by areas of knowledge related to use and development of software. The categories include: knowledge of the underlying algorithm and its limitations; knowledge of the operation of the software, such as input values, parameters, error messages, and interpretation of output; and knowledge of the environment for the software including both data and users. Conclusion: We propose a new approach to developing guidelines which is based on acquiring knowledge-rather than performing tests. The ultimate goal is to provide robust software guidelines which will be practical and effective.

  5. Software Complexity Threatens Performance Portability

    SciTech Connect (OSTI)

    Gamblin, T.

    2015-09-11

    Modern HPC software packages are rarely self-contained. They depend on a large number of external libraries, and many spend large fractions of their runtime in external subroutines. Performance portability depends not only on the effort of application teams, but also on the availability of well-tuned libraries. At most sites, the burden of maintaining libraries is shared by code teams and facilities. Facilities typically provide well-tuned default versions, but code teams frequently build with bleeding-edge compilers to achieve high performance. For this reason, HPC has no “standard” software stack, unlike other domains where performance is not critical. Incompatibilities among compilers and software versions force application teams and facility staff to re-build custom versions of libraries for each new toolchain. Because the number of potential configurations is combinatorial, and because HPC software is notoriously difficult to port to new machines [3, 7, 8], the tuning effort required to support and maintain performance-portable libraries outstrips the available manpower at most sites. Software complexity is a growing obstacle to performance portability for HPC.

  6. Federal Utility Partnership Working Group Purpose, Policies,...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Group Purpose, Policies, and Operations Draft document (last updated in 2010) discusses the purpose, policies, and operations of the Federal Utility Partnership Working Group. ...

  7. Recent progress and advances in iterative software (including parallel aspects)

    SciTech Connect (OSTI)

    Carey, G.; Young, D.M.; Kincaid, D.

    1994-12-31

    The purpose of the workshop is to provide a forum for discussion of the current state of iterative software packages. Of particular interest is software for large scale engineering and scientific applications, especially for distributed parallel systems. However, the authors will also review the state of software development for conventional architectures. This workshop will complement the other proposed workshops on iterative BLAS kernels and applications. The format for the workshop is as follows: To provide some structure, there will be brief presentations, each of less than five minutes duration and dealing with specific facets of the subject. These will be designed to focus the discussion and to stimulate an exchange with the participants. Issues to be covered include: The evolution of iterative packages, current state of the art, the parallel computing challenge, applications viewpoint, standards, and future directions and open problems.

  8. Software engineering and graphical programming languages

    SciTech Connect (OSTI)

    Jefferson, K.; Porter, T.; West, T.

    1997-11-01

    This report contains viewgraphs on software engineering and adapting engineering processes to a graphical programming languages.

  9. A ''Toolbox''21 Equivalent Process for Safety Analysis Software

    SciTech Connect (OSTI)

    O'KULA, KR

    2004-04-30

    Defense Nuclear Facilities Safety Board (DNFSB) Recommendation 2002-1 (Quality Assurance for Safety-Related Software) identified a number of quality assurance issues on the use of software in Department of Energy (DOE) facilities for analyzing hazards, and designing and operating controls that prevent or mitigate potential accidents. The development and maintenance of a collection, or ''toolbox,'' of multiple-site use, standard solution, Software Quality Assurance (SQA)-compliant safety software is one of the major improvements identified in the associated DOE Implementation Plan (IP). The DOE safety analysis toolbox will contain a set of appropriately quality-assured, configuration-controlled, safety analysis codes, recognized for DOE-broad, safety basis applications. Currently, six widely applied safety analysis computer codes have been designated for toolbox consideration. While the toolbox concept considerably reduces SQA burdens among DOE users of these codes, many users of unique, single-purpose, or single-site software may still have sufficient technical justification to continue use of their computer code of choice, but are thwarted by the multiple-site condition on toolbox candidate software. The process discussed here provides a roadmap for an equivalency argument, i.e., establishing satisfactory SQA credentials for single-site software that can be deemed ''toolbox-equivalent''. The process is based on the model established to meet IP Commitment 4.2.1.2: Establish SQA criteria for the safety analysis ''toolbox'' codes. Implementing criteria that establish the set of prescriptive SQA requirements are based on implementation plan/procedures from the Savannah River Site, also incorporating aspects of those from the Waste Isolation Pilot Plant (SNL component) and the Yucca Mountain Project. The major requirements are met with evidence of a software quality assurance plan, software requirements and design documentation, user's instructions, test report, a

  10. GridOPTICS Software System

    Energy Science and Technology Software Center (OSTI)

    2014-02-24

    GridOPTICS Software System (GOSS) is a middleware that facilitates creation of new, modular and flexible operational and planning platforms that can meet the challenges of the next generation power grid. GOSS enables Department of Energy, power system utilities, and vendors to build better tools faster. GOSS makes it possible to integrate Future Power Grid Initiative software products/prototypes into existing power grid software systems, including the PNNL PowerNet and EIOC environments. GOSS is designed to allowmore » power grid applications developed for different underlying software platforms installed in different utilities to communicate with ease. This can be done in compliance with existing security and data sharing policies between the utilities. GOSS not only supports one-to-one data transfer between applications, but also publisher/subscriber scheme. To support interoperability requirements of future EMS, GOSS is designed for CIM compliance. In addition to this, it supports authentication and authorization capabilities to protect the system from cyber threats. In summary, the contributions of the GOSS middleware are as follows: • A platform to support future EMS development. • A middleware that promotes interoperability between power grid applications. • A distributed architecture that separates data sources from power grid applications. • Support for data exchange with either one-to-one or publisher/subscriber interfaces. • An authentication and authorization scheme for limiting the access to data between utilities.« less

  11. Human factors in software development

    SciTech Connect (OSTI)

    Curtis, B.

    1986-01-01

    This book presents an overview of ergonomics/human factors in software development, recent research, and classic papers. Articles are drawn from the following areas of psychological research on programming: cognitive ergonomics, cognitive psychology, and psycholinguistics. Topics examined include: theoretical models of how programmers solve technical problems, the characteristics of programming languages, specification formats in behavioral research and psychological aspects of fault diagnosis.

  12. Scalable System Software for Parallel Programming | Argonne Leadership

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Computing Facility Streamlines from an early time step of the Rayleigh-Taylor instability depend on scalable storage, communication, and data analysis algorithms developed at extreme scale using INCITE resources. Tom Peterka Scalable System Software for Parallel Programming PI Name: Robert Latham PI Email: robl@mcs.anl.gov Institution: Argonne National Laboratory Allocation Program: INCITE Allocation Hours at ALCF: 20 Million Year: 2013 Research Domain: Computer Science The purpose of this

  13. Verification of operating software for cooperative monitoring applications

    SciTech Connect (OSTI)

    Tolk, K.M.; Rembold, R.K.

    1997-08-01

    Monitoring agencies often use computer based equipment to control instruments and to collect data at sites that are being monitored under international safeguards or other cooperative monitoring agreements. In order for this data to be used as an independent verification of data supplied by the host at the facility, the software used must be trusted by the monitoring agency. The monitoring party must be sure that the software has not be altered to give results that could lead to erroneous conclusions about nuclear materials inventories or other operating conditions at the site. The host might also want to verify that the software being used is the software that has been previously inspected in order to be assured that only data that is allowed under the agreement is being collected. A description of a method to provide this verification using keyed has functions and how the proposed method overcomes possible vulnerabilities in methods currently in use such as loading the software from trusted disks is presented. The use of public key data authentication for this purpose is also discussed.

  14. Proceedings of the Fifth Triennial Software Quality Forum 2000, Software for the Next Millennium, Software Quality Forum

    SciTech Connect (OSTI)

    Scientific Software Engineering Group, CIC-12

    2000-04-01

    The Software Quality Forum is a triennial conference held by the Software Quality Assurance Subcommittee for the Department of Energy's Quality Managers. The forum centers on key issues, information, and technology important in software development for the Nuclear Weapons Complex. This year it will be opened up to include local information technology companies and software vendors presenting their solutions, ideas, and lessons learned. The Software Quality Forum 2000 will take on a more hands-on, instructional tone than those previously held. There will be an emphasis on providing information, tools, and resources to assist developers in their goal of producing next generation software.

  15. Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Evaluation and Test Suite coNCePTuaL -- A Network Correctness and Performance Testing Language db, Version 0.2.x FEHM (Finite Element Heat and Mass Transfer Code) Genome...

  16. Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    About Energy.gov » Web Policies » Social Media Social Media The Department of Energy is committed to expanding the conversation on energy issues and upholding open government principles of transparency, participation and collaboration. One of the key ways we seek to accomplish this is through the use of social media. "Social media" is a broad term for a wide spectrum of interactive and user-driven content technologies, including social networks like Twitter, Facebook, YouTube and

  17. Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Policies User Surveys NERSC Users Group Help Staff Blogs Request Repository Mailing List Need Help? Out-of-hours Status and Password help Call operations: 1-800-66-NERSC, option 1 ...

  18. Secure Video Surveillance System Acquisition Software

    Energy Science and Technology Software Center (OSTI)

    2009-12-04

    The SVSS Acquisition Software collects and displays video images from two cameras through a VPN, and store the images onto a collection controller. The software is configured to allow a user to enter a time window to display up to 2 1/2, hours of video review. The software collects images from the cameras at a rate of 1 image per second and automatically deletes images older than 3 hours. The software code operates in amore » linux environment and can be run in a virtual machine on Windows XP. The Sandia software integrates the different COTS software together to build the video review system.« less

  19. SWiFT Software Quality Assurance Plan.

    SciTech Connect (OSTI)

    Berg, Jonathan Charles

    2016-01-01

    This document describes the software development practice areas and processes which contribute to the ability of SWiFT software developers to provide quality software. These processes are designed to satisfy the requirements set forth by the Sandia Software Quality Assurance Program (SSQAP). APPROVALS SWiFT Software Quality Assurance Plan (SAND2016-0765) approved by: Department Manager SWiFT Site Lead Dave Minster (6121) Date Jonathan White (6121) Date SWiFT Controls Engineer Jonathan Berg (6121) Date CHANGE HISTORY Issue Date Originator(s) Description A 2016/01/27 Jon Berg (06121) Initial release of the SWiFT Software Quality Assurance Plan

  20. Geographic Information System (GIS) Emergency Support for the May 2000 Cerro Grande Wildfire, Los Alamos, New Mexico, USA

    SciTech Connect (OSTI)

    C.R.Mynard; G.N.Keating; P.M.Rich; D.R. Bleakly

    2003-05-01

    In May 2000 the Cerro Grande wildfire swept through Los Alamos, New Mexico, burning approximately 17,400 ha (43,000 acres) and causing evacuation of Los Alamos National Laboratory (LANL) and the communities of Los Alamos and White Rock. An integral part of emergency response during the fire was the use of geographic information system (GIS) technology, which continues to be used in support of post-fire restoration and environmental monitoring. During the fire Laboratory GIS staff and volunteers from other organizations worked to produce maps and provide support for emergency managers, including at an emergency GIS facility in Santa Fe. Subsequent to the fire, Laboratory GIS teams supported the multiagency Burned Area Emergency Rehabilitation (BAER) team to provide GIS data and maps for planning mitigation efforts. The GIS teams continue to help researchers, operations personnel, and managers deal with the tremendous changes caused by the fire. Much of the work is under the auspices of the Cerro Grande Rehabilitation Project (CGRP) to promote recovery from fire damage, improve information exchange, enhance emergency management, and conduct mitigation activities. GIS efforts during the fire provided important lessons about institutional matters, working relationships, and emergency preparedness. These lessons include the importance of (1) an integrated framework for assessing natural and human hazards in a landscape context; (2) a strong GIS capability for emergency response; (3) coordinated emergency plans for GIS operations; (4) a method for employees to report their whereabouts and receive authoritative information during an evacuation; (5) GIS data that are complete, backed-up, and available during an emergency; (6) adaptation of GIS to the circumstances of the emergency; (7) better coordination in the GIS community; (8) better integration of GIS into LANL operations; and (9) a central data warehouse for data and metadata. These lessons are important for planning

  1. Component Modeling Approach Software Tool

    SciTech Connect (OSTI)

    2010-08-23

    The Component Modeling Approach Software Tool (CMAST) establishes a set of performance libraries of approved components (frames, glass, and spacer) which can be accessed for configuring fenestration products for a project, and btaining a U-factor, Solar Heat Gain Coefficient (SHGC), and Visible Transmittance (VT) rating for those products, which can then be reflected in a CMA Label Certificate for code compliance. CMAST is web-based as well as client-based. The completed CMA program and software tool will be useful in several ways for a vast array of stakeholders in the industry: Generating performance ratings for bidding projects Ascertaining credible and accurate performance data Obtaining third party certification of overall product performance for code compliance

  2. Remotely Monitored Sealing Array Software

    SciTech Connect (OSTI)

    2012-09-12

    The Remotely Monitored Sealing Array (RMSA) utilizes the Secure Sensor Platform (SSP) framework to establish the fundamental operating capabilities for communication, security, power management, and cryptography. In addition to the SSP framework the RMSA software has unique capabilities to support monitoring a fiber optic seal. Fiber monitoring includes open and closed as well as parametric monitoring to detect tampering attacks. The fiber monitoring techniques, using the SSP power management processes, allow the seals to last for years while maintaining the security requirements of the monitoring application. The seal is enclosed in a tamper resistant housing with software to support active tamper monitoring. New features include LED notification of fiber closure, the ability to retrieve the entire fiber optic history via translator command, separate memory storage for fiber optic events, and a more robust method for tracking and resending failed messages.

  3. Component Modeling Approach Software Tool

    Energy Science and Technology Software Center (OSTI)

    2010-08-23

    The Component Modeling Approach Software Tool (CMAST) establishes a set of performance libraries of approved components (frames, glass, and spacer) which can be accessed for configuring fenestration products for a project, and btaining a U-factor, Solar Heat Gain Coefficient (SHGC), and Visible Transmittance (VT) rating for those products, which can then be reflected in a CMA Label Certificate for code compliance. CMAST is web-based as well as client-based. The completed CMA program and software toolmore » will be useful in several ways for a vast array of stakeholders in the industry: Generating performance ratings for bidding projects Ascertaining credible and accurate performance data Obtaining third party certification of overall product performance for code compliance« less

  4. Remotely Monitored Sealing Array Software

    Energy Science and Technology Software Center (OSTI)

    2012-09-12

    The Remotely Monitored Sealing Array (RMSA) utilizes the Secure Sensor Platform (SSP) framework to establish the fundamental operating capabilities for communication, security, power management, and cryptography. In addition to the SSP framework the RMSA software has unique capabilities to support monitoring a fiber optic seal. Fiber monitoring includes open and closed as well as parametric monitoring to detect tampering attacks. The fiber monitoring techniques, using the SSP power management processes, allow the seals to lastmore » for years while maintaining the security requirements of the monitoring application. The seal is enclosed in a tamper resistant housing with software to support active tamper monitoring. New features include LED notification of fiber closure, the ability to retrieve the entire fiber optic history via translator command, separate memory storage for fiber optic events, and a more robust method for tracking and resending failed messages.« less

  5. Roadmap for Peridynamic Software Implementation

    SciTech Connect (OSTI)

    Littlewood, David John

    2015-10-01

    The application of peridynamics for engineering analysis requires an efficient and robust software implementation. Key elements include processing of the discretization, the proximity search for identification of pairwise interactions, evaluation of the con- stitutive model, application of a bond-damage law, and contact modeling. Additional requirements may arise from the choice of time integration scheme, for example esti- mation of the maximum stable time step for explicit schemes, and construction of the tangent stiffness matrix for many implicit approaches. This report summaries progress to date on the software implementation of the peridynamic theory of solid mechanics. Discussion is focused on parallel implementation of the meshfree discretization scheme of Silling and Askari [33] in three dimensions, although much of the discussion applies to computational peridynamics in general.

  6. Software Defined Networking (SDN) Project

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Software Defined Networking (SDN) Project Energy sector-focused SDN flow controller to manage control system networks centrally and securely Background Traditional information technology (IT) approaches to network administration and packet delivery are not always appropriate for electric industry applications. The nondeterministic latency and configuration complexity make network design difficult for the deterministic, static control systems of the energy sector. In the electric industry, it is

  7. MemAxes Visualization Software

    Energy Science and Technology Software Center (OSTI)

    2014-08-28

    Hardware advancements such as Intel's PEBS and AMD's IBS, as well as software developments such as the perf_event API in Linux have made available the acquisition of memory access samples with performance information. MemAxes is a visualization and analysis tool for memory access sample data. By mapping the samples to their associated code, variables, node topology, and application dataset, MemAxes provides intuitive views of the data.

  8. Independent Verification and Validation Of SAPHIRE 8 Software Design and Interface Design Project Number: N6423 U.S. Nuclear Regulatory Commission

    SciTech Connect (OSTI)

    Kent Norris

    2010-03-01

    The purpose of the Independent Verification and Validation (IV&V) role in the evaluation of the SAPHIRE software design and interface design is to assess the activities that results in the development, documentation, and review of a software design that meets the requirements defined in the software requirements documentation. The IV&V team began this endeavor after the software engineering and software development of SAPHIRE had already been in production. IV&V reviewed the requirements specified in the NRC Form 189s to verify these requirements were included in SAPHIRE’s Software Verification and Validation Plan (SVVP) design specification.

  9. Independent Verification and Validation Of SAPHIRE 8 Software Design and Interface Design Project Number: N6423 U.S. Nuclear Regulatory Commission

    SciTech Connect (OSTI)

    Kent Norris

    2009-10-01

    The purpose of the Independent Verification and Validation (IV&V) role in the evaluation of the SAPHIRE software design and interface design is to assess the activities that results in the development, documentation, and review of a software design that meets the requirements defined in the software requirements documentation. The IV&V team began this endeavor after the software engineering and software development of SAPHIRE had already been in production. IV&V reviewed the requirements specified in the NRC Form 189s to verify these requirements were included in SAPHIRE’s Software Verification and Validation Plan (SVVP) design specification.

  10. Use of ArcGIS in Environmental Monitoring at Idaho National Laboratory

    SciTech Connect (OSTI)

    oertel; giles

    2007-06-01

    The Idaho National Laboratory is a U.S. Department of Energy site located in southeastern Idaho. The INL is required to perform environmental monitoring of anthropogenically introduced contaminants. One primary contaminant of interest is radioactive Cs-137 which is resident in INL soils due to past operational activities and atmospheric weapons testing. Collection of field data is performed using vehicle mounted and portable radiation detector units. All data is combined in ArcGIS and displayed over georeferenced satellite images and digital elevation models. The use of the ArcGIS geostatistical analysis package enhances the ability to look for areas of higher Cs-137 concentration. Combining current monitoring results with meteorological wind pattern maps allows for siting of new and improved monitoring locations. Use of the ArcGIS package provides an integrated analysis and mapping protocol for use in radioactive contaminant monitoring.

  11. Software archeology: a case study in software quality assurance and design

    SciTech Connect (OSTI)

    Macdonald, John M; Lloyd, Jane A; Turner, Cameron J

    2009-01-01

    Ideally, quality is designed into software, just as quality is designed into hardware. However, when dealing with legacy systems, demonstrating that the software meets required quality standards may be difficult to achieve. As the need to demonstrate the quality of existing software was recognized at Los Alamos National Laboratory (LANL), an effort was initiated to uncover and demonstrate that legacy software met the required quality standards. This effort led to the development of a reverse engineering approach referred to as software archaeology. This paper documents the software archaeology approaches used at LANL to document legacy software systems. A case study for the Robotic Integrated Packaging System (RIPS) software is included.

  12. TWRS systems engineering software configuration management plan

    SciTech Connect (OSTI)

    Porter, P.E.

    1996-10-09

    This plan delineates the requirements for control of software developed and supported by the Tank Waste Remediation System (TWRS) Technical Integration organization. The information contained in this plan shall assist employees involved with software modification and configuration control.

  13. Using GIS technology to manage information following a bio-terrorism attack.

    SciTech Connect (OSTI)

    Melton, Brad; Ramsey, James L., Jr.; Finley, Patrick

    2005-05-01

    The BROOM system was developed to collect, manage and analyze information from bioterrorist attacks on strategic buildings. GIS features help decision-makers and analysts rapidly assess the current status of contaminated facilities and develop optimized cleanup strategies. BROOM consists of networked server, desktop and PDA components. PDAs are deployed to collect samples of suspected bioagents, such as anthrax. Novel geostatistical methods are used to generate contaminant maps and define optimum locations for subsequent sampling. Efficiency and accuracy gains witnessed in field tests show that GIS technology can play a vital role in visualizing, managing and analyzing data from bioterrorism incidents.

  14. CRAD, Criteria and Guidelines For the Assessment of Safety System Software and Firmware at Defense Nuclear Facilities

    Office of Energy Efficiency and Renewable Energy (EERE)

    The purpose and scope of this CRAD is to provide a set of consistent assessment criteria and guidelines for the assessment of safety system software and firmware that performs an SC or SS function, as described in the Background section. The scope of the assessment, henceforth, is called "I&C software."

  15. Research Challenges for Visualization Software. (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    Research Challenges for Visualization Software. Citation ... IEEE Computer Magazine. Research Org: Sandia National Laboratories Sponsoring Org: USDOE National Nuclear Security ...

  16. @ work' video segment features Robotic Software Engineer

    SciTech Connect (OSTI)

    Idaho National Laboratory

    2008-03-27

    @ work highlights Idaho National Laboratory employees and the jobs they perform.This segment features Robotic Software Engineer Miles Walton.

  17. IS&T@LANL Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IS&T@LANL Software IS&T@LANL Software The following software packages have been developed with significant LANL involvement or lead. Contact Institute Director Stephan Eidenbenz (505) 667-3742 Email Professional Staff Assistant Nickole Aguilar Garcia (505) 665-3048 Email The following software packages have been developed with significant LANL involvement or lead. The links take you either to the project web page or to the open-source repository for download. LANL publishes many of its

  18. Software Helps Kentucky County Gauge Energy Use

    Broader source: Energy.gov [DOE]

    Grant money helps purchase software that will track energy use and help county officials identify potential savings.

  19. VMS software for the Jorway-411 interface

    SciTech Connect (OSTI)

    Dorries, T.; Moore, C.; Pordes, R.; White, V.

    1987-05-01

    This report describes a Software Package used to access CAMAC through the Jorway-411 Interface, for use on VAX/VMS systems. The software can be used to access parallel and/or serial CAMAC branch highways, and multiple Jorways may be connected to the VAX UNIBUS or MicroVax QBUS. The software available includes a VAX/VMS device driver for the JORWAY-411 and support routines and programs that access the driver. The software is accompanied by extensive documentation.

  20. @ work' video segment features Robotic Software Engineer

    ScienceCinema (OSTI)

    Idaho National Laboratory

    2010-01-08

    @ work highlights Idaho National Laboratory employees and the jobs they perform.This segment features Robotic Software Engineer Miles Walton.

  1. Overview of the AST software construction methodology

    SciTech Connect (OSTI)

    Winter, V.

    1997-11-01

    This report contains viewgraphs on the Abstraction, Synthesis, and Transformation of software construction methods. Algorithms examples are given.

  2. Cost Model and Cost Estimating Software

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-03-28

    This chapter discusses a formalized methodology is basically a cost model, which forms the basis for estimating software.

  3. Software: our quest for excellence. Honoring 50 years of software history, progress, and process

    SciTech Connect (OSTI)

    1997-06-01

    The Software Quality Forum was established by the Software Quality Assurance (SQA) Subcommittee, which serves as a technical advisory group on software engineering and quality initiatives and issues for DOE`s quality managers. The forum serves as an opportunity for all those involved in implementing SQA programs to meet and share ideas and concerns. Participation from managers, quality engineers, and software professionals provides an ideal environment for identifying and discussing issues and concerns. The interaction provided by the forum contributes to the realization of a shared goal--high quality software product. Topics include: testing, software measurement, software surety, software reliability, SQA practices, assessments, software process improvement, certification and licensing of software professionals, CASE tools, software project management, inspections, and management`s role in ensuring SQA. The bulk of this document consists of vugraphs. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

  4. AIRMaster+ Software Tool Brochure | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Software Tool Brochure AIRMaster+ Software Tool Brochure Brochure that provides information on AMO's AIRMaster+ software tool, including how it works, next steps, and how to access the tool. AIRMaster+ Brochure (2.85 MB) More Documents & Publications AIRMaster+ Tool Introduction AIRMaster+ Fact Sheet AIRMaster+

  5. Battery Life Estimator (BLE) Data Analysis Software v. 1.2

    SciTech Connect (OSTI)

    Thomas, Edward; Bloom, Ira; Battaglia, Vincent; & Christopherson, Jon

    2010-02-24

    The purpose of this software is estimate the useable life of rechargeable batteries (e.g., lithium-ion). The software employs a generalized statistical approach to model cell data in the context of accelerated aging experiments. The cell performance is modeled in two parts. The first part consists of a deterministic degradation model which models the average cell behavior. The second part relates to the statistical variation in performance of the cells (error model). Experimental data from an accelerated aging experiment will be input from an Excel worksheet. The software will then query the user for a specific model form (within the generalized model framework). Model parameters will be estimated by the software using various statistical methodologies. Average cell life will be predicted using the estimated model parameters. The uncertainty in the estimated cell life will also be computed using bootstrap simulations. This software can be used in several modes: 1) fit only, 2) fit and simulation, and 3) simulation only

  6. Managing scientific software complexity with Bocca and CCA

    SciTech Connect (OSTI)

    Benjamin, Allan A.; Norris, Boyana; Elwasif, Wael R; Armstrong, Robert C.

    2008-01-01

    In high-performance scientific software development, the emphasis is often on short time to first solution. Even when the development of new components mostly reuses existing components or libraries and only small amounts of new code must be created, dealing with the component glue code and software build processes to obtain complete applications is still tedious and error-prone. Component-based software meant to reduce complexity at the application level increases complexity to the extent that the user must learn and remember the interfaces and conventions of the component model itself. To address these needs, we introduce Bocca, the first tool to enable application developers to perform rapid component prototyping while maintaining robust software-engineering practices suitable to HPC environments. Bocca provides project management and a comprehensive build environment for creating and managing applications composed of Common Component Architecture components. Of critical importance for high-performance computing (HPC) applications, Bocca is designed to operate in a language-agnostic way, simultaneously handling components written in any of the languages commonly used in scientific applications: C, C++, Fortran, Python and Java. Bocca automates the tasks related to the component glue code, freeing the user to focus on the scientific aspects of the application. Bocca embraces the philosophy pioneered by Ruby on Rails for web applications: start with something that works, and evolve it to the user's purpose.

  7. Managing Scientific Software Complexity with Bocca and CCA

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Allan, Benjamin A.; Norris, Boyana; Elwasif, Wael R.; Armstrong, Robert C.

    2008-01-01

    In high-performance scientific software development, the emphasis is often on short time to first solution. Even when the development of new components mostly reuses existing components or libraries and only small amounts of new code must be created, dealing with the component glue code and software build processes to obtain complete applications is still tedious and error-prone. Component-based software meant to reduce complexity at the application level increases complexity to the extent that the user must learn and remember the interfaces and conventions of the component model itself. To address these needs, we introduce Bocca, the first tool to enablemore » application developers to perform rapid component prototyping while maintaining robust software-engineering practices suitable to HPC environments. Bocca provides project management and a comprehensive build environment for creating and managing applications composed of Common Component Architecture components. Of critical importance for high-performance computing (HPC) applications, Bocca is designed to operate in a language-agnostic way, simultaneously handling components written in any of the languages commonly used in scientific applications: C, C++, Fortran, Python and Java. Bocca automates the tasks related to the component glue code, freeing the user to focus on the scientific aspects of the application. Bocca embraces the philosophy pioneered by Ruby on Rails for web applications: start with something that works, and evolve it to the user's purpose.« less

  8. GENI: Grid Hardware and Software

    SciTech Connect (OSTI)

    2012-01-09

    GENI Project: The 15 projects in ARPA-E’s GENI program, short for “Green Electricity Network Integration,” aim to modernize the way electricity is transmitted in the U.S. through advances in hardware and software for the electric grid. These advances will improve the efficiency and reliability of electricity transmission, increase the amount of renewable energy the grid can utilize, and provide energy suppliers and consumers with greater control over their power flows in order to better manage peak power demand and cost.

  9. Software | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software ALCF MPI Benchmark Suite: ALCF MPI Benchmark Suite, which is designed to benchmark and measure several basic routines, such as messaging rate, ping-pong, aggregate off-node bandwidth, bi-section bandwidth, and collective operations. Contact: Vitali Morozov Download: ALCF_MPI_Benchmark_v1.01.BGQ.tar.bz2 BigSort Benchmark: The BigSort benchmark sorts a large number of 64-bit integers (from 0 to T) in parallel. In particular, the total size of the data set can exceed the aggregated memory

  10. CHP Installed Capacity Optimizer Software

    Energy Science and Technology Software Center (OSTI)

    2004-11-30

    The CHP Installed Capacity Optimizer is a Microsoft Excel spreadsheet application that determines the most economic amount of capacity of distributed generation and thermal utilization equipment (e.g., absorption chillers) to install for any user-defined set of load and cost data. Installing the optimum amount of capacity is critical to the life-cycle economic viability of a distributed generation/cooling heat and power (CHP) application. Using advanced optimization algorithms, the software accesses the loads, utility tariffs, equipment costs,more » etc., and provides to the user the most economic amount of system capacity to install.« less