Sample records for genetically engineered organisms

  1. The regulation of genetically engineered marine organisms released into the coastal environment: an exploratory analysis

    E-Print Network [OSTI]

    MacGregor, Carol Lea

    1988-01-01T23:59:59.000Z

    innovation has had a tremendous impact in commercial and industrial enterprises. However, there is great concern that the potential risks accompanying the advances in biotechnology may outweigh the benefits. As more and more products reach manufacturing... of, by describing a 10 policy's impacts and 2) to judge the policy's effectiveness according to a set of standards or value criteria. 7 This study will assess the federal government's policy towards environmental releases of genetically altered...

  2. Engineering Organization Chart Assistant Dean

    E-Print Network [OSTI]

    Delene, David J.

    Engineering Organization Chart Fall `12 Assistant Dean Outreach & Recruiting Matthew Cavalli and Geological Engineering Joseph Hartman Chair, Petroleum Engineering Steve Benson Chair, Electrical Engineering Forrest Ames (interim) Chair, Mechanical Engineering Matthew Cavalli Chair, Chemical Engineering Mike Mann

  3. Genetically Engineered Food: The Science Behind the

    E-Print Network [OSTI]

    Bradshaw, Toby

    Genetically Engineered Food: The Science Behind the Controversy Toby Bradshaw Washington Research that you: · Know more, and perhaps worry less, about the genetic engineering (GE) of food plants · Know;Genetically engineered (GE) or genetically modified (GM)? · Genetic engineering -- Intentional transfer

  4. Genetic Engineering Workshop Report, 2010

    SciTech Connect (OSTI)

    Allen, J; Slezak, T

    2010-11-03T23:59:59.000Z

    The Lawrence Livermore National Laboratory (LLNL) Bioinformatics group has recently taken on a role in DTRA's Transformation Medical Technologies (TMT) program. The high-level goal of TMT is to accelerate the development of broad-spectrum countermeasures. To achieve this goal, there is a need to assess the genetic engineering (GE) approaches, potential application as well as detection and mitigation strategies. LLNL was tasked to coordinate a workshop to determine the scope of investments that DTRA should make to stay current with the rapid advances in genetic engineering technologies, so that accidental or malicious uses of GE technologies could be adequately detected and characterized. Attachment A is an earlier report produced by LLNL for TMT that provides some relevant background on Genetic Engineering detection. A workshop was held on September 23-24, 2010 in Springfield, Virginia. It was attended by a total of 55 people (see Attachment B). Twenty four (44%) of the attendees were academic researchers involved in GE or bioinformatics technology, 6 (11%) were from DTRA or the TMT program management, 7 (13%) were current TMT performers (including Jonathan Allen and Tom Slezak of LLNL who hosted the workshop), 11 (20%) were from other Federal agencies, and 7 (13%) were from industries that are involved in genetic engineering. Several attendees could be placed in multiple categories. There were 26 attendees (47%) who were from out of the DC area and received travel assistance through Invitational Travel Orders (ITOs). We note that this workshop could not have been as successful without the ability to invite experts from outside of the Beltway region. This workshop was an unclassified discussion of the science behind current genetic engineering capabilities. US citizenship was not required for attendance. While this may have limited some discussions concerning risk, we felt that it was more important for this first workshop to focus on the scientific state of the art. We also consciously chose to not dwell on matters of policy (for example, screening of commercial gene or oligo synthesis orders), as multiple other forums for policy discussion have taken place in recent years. We acknowledge that other workshops on topics relevant to genetic engineering should be held, some of which may need to take place at higher classification levels. The workshop moderators would like to acknowledge the enthusiastic participation of the attendees in the discussions. Special thanks are given to Sofi Ibrahim, for his extensive assistance on helping this report reach its final form. The genetic engineering workshop brought together a diverse mix of genetic engineering pioneers and experts, Federal agency representatives concerned with abuses of genetic engineering, TMT performers, bioinformatics experts, and representatives from industry involved with large-scale genetic engineering and synthetic biology. Several talks established the current range of genetic engineering capabilities and the relative difficulties of identifying and characterizing the results of their use. Extensive discussions established a number of recommendations to DTRA of how to direct future research investments so that any mis-use of genetic engineering techniques can be promptly identified and characterized.

  5. National Hispanic engineering organization names Sandia manager...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hispanic engineering organization names Sandia manager Engineer of the Year | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing...

  6. Genetic engineering of cyanobacteria as biodiesel feedstock.

    SciTech Connect (OSTI)

    Ruffing, Anne M.; Trahan, Christine Alexandra; Jones, Howland D. T.

    2013-01-01T23:59:59.000Z

    Algal biofuels are a renewable energy source with the potential to replace conventional petroleum-based fuels, while simultaneously reducing greenhouse gas emissions. The economic feasibility of commercial algal fuel production, however, is limited by low productivity of the natural algal strains. The project described in this SAND report addresses this low algal productivity by genetically engineering cyanobacteria (i.e. blue-green algae) to produce free fatty acids as fuel precursors. The engineered strains were characterized using Sandia's unique imaging capabilities along with cutting-edge RNA-seq technology. These tools are applied to identify additional genetic targets for improving fuel production in cyanobacteria. This proof-of-concept study demonstrates successful fuel production from engineered cyanobacteria, identifies potential limitations, and investigates several strategies to overcome these limitations. This project was funded from FY10-FY13 through the President Harry S. Truman Fellowship in National Security Science and Engineering, a program sponsored by the LDRD office at Sandia National Laboratories.

  7. Dep. Of Biotechnology & Genetic Engineering Study plan(2005-2006)

    E-Print Network [OSTI]

    240234Hu man Genetics2240231240352 Environmental Biotechnology 3240216 240335Cytogenetics1240234240471 Dep. Of Biotechnology & Genetic Engineering Study plan(2005-2006) First semester or Con 212241Analytical Chemistry3212103240281 Introduction to Biotechnology2 240107+1 30102 212242

  8. Conjugated Polymer Design and Engineering for Organic Electronics

    E-Print Network [OSTI]

    Woo, Claire Hoi Kar

    2011-01-01T23:59:59.000Z

    Design and Engineering for Organic Electronics By Claire Hoi Kar Woo Doctor of Philosophy in Chemical

  9. Genetic engineering of hematopoietic stem cells to generate invariant natural killer T cells

    E-Print Network [OSTI]

    2015-01-01T23:59:59.000Z

    development, leaving HSC engineering the sole approach toGenetic engineering of hematopoietic stem cells to generateT-cell receptor (TCR) gene engineering of hematopoietic stem

  10. Organization Design Optimization using Genetic Programming

    E-Print Network [OSTI]

    Fernandez, Thomas

    describes how we use Genetic Programming (GP) techniques to help project managers find near optimal designs's experience and how effectively the person can apply relevant past experience. Project managers' only means is very costly. Based on Tatum's empirical research, managers adapt personal experience as the primary

  11. TMTI Task 1.6 Genetic Engineering Methods and Detection

    SciTech Connect (OSTI)

    Slezak, T; Lenhoff, R; Allen, J; Borucki, M; Vitalis, E; Gardner, S

    2009-12-04T23:59:59.000Z

    A large number of GE techniques can be adapted from other microorganisms to biothreat bacteria and viruses. Detection of GE in a microorganism increases in difficulty as the size of the genetic change decreases. In addition to the size of the engineered change, the consensus genomic sequence of the microorganism can impact the difficulty of detecting an engineered change in genomes that are highly variable from strain to strain. This problem will require comprehensive databases of whole genome sequences for more genetically variable biothreat bacteria and viruses. Preliminary work with microarrays for detecting synthetic elements or virulence genes and analytic bioinformatic approaches for whole genome sequence comparison to detect genetic engineering show promise for attacking this difficult problem but a large amount of future work remains.

  12. Genetic engineering of human ES and iPS cells using TALE nucleases

    E-Print Network [OSTI]

    Hockemeyer, Dirk

    Targeted genetic engineering of human pluripotent cells is a prerequisite for exploiting their full potential. Such genetic manipulations can be achieved using site-specific nucleases. Here we engineered transcription ...

  13. Genetic engineering of syringyl-enriched lignin in plants

    DOE Patents [OSTI]

    Chiang, Vincent Lee; Li, Laigeng

    2004-11-02T23:59:59.000Z

    The present invention relates to a novel DNA sequence, which encodes a previously unidentified lignin biosynthetic pathway enzyme, sinapyl alcohol dehydrogenase (SAD) that regulates the biosynthesis of syringyl lignin in plants. Also provided are methods for incorporating this novel SAD gene sequence or substantially similar sequences into a plant genome for genetic engineering of syringyl-enriched lignin in plants.

  14. Fault prediction in aircraft engines using Self-Organizing Maps

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Fault prediction in aircraft engines using Self- Organizing Maps Marie Cottrell1 , Patrice Gaubert1. Aircraft engines are designed to be used during several tens of years. Their maintenance is a challenging and costly task, for obvious security reasons. The goal is to ensure a proper operation of the engines

  15. Optimisation of the Gas-Exchange System of Combustion Engines by Genetic Algorithm

    E-Print Network [OSTI]

    Marsland, Stephen

    Optimisation of the Gas-Exchange System of Combustion Engines by Genetic Algorithm C. D. Rose, S. R of combustion engine gas-exchange systems still predominantly use trial and error. This paper proposes a new. Keywords - genetic algorithm; variable-length input encoding; combustion engine; optimisation I

  16. Phytosequestration: Carbon biosequestration by plants and the prospects of genetic engineering

    SciTech Connect (OSTI)

    Jansson, C.; Wullschleger, S.D.; Kalluri, U.C.; Tuskan, G.A.

    2010-07-15T23:59:59.000Z

    Photosynthetic assimilation of atmospheric carbon dioxide by land plants offers the underpinnings for terrestrial carbon (C) sequestration. A proportion of the C captured in plant biomass is partitioned to roots, where it enters the pools of soil organic C and soil inorganic C and can be sequestered for millennia. Bioenergy crops serve the dual role of providing biofuel that offsets fossil-fuel greenhouse gas (GHG) emissions and sequestering C in the soil through extensive root systems. Carbon captured in plant biomass can also contribute to C sequestration through the deliberate addition of biochar to soil, wood burial, or the use of durable plant products. Increasing our understanding of plant, microbial, and soil biology, and harnessing the benefits of traditional genetics and genetic engineering, will help us fully realize the GHG mitigation potential of phytosequestration.

  17. Field application of a genetically engineered microorganism for polycyclic aromatic hydrocarbon bioremediation process monitoring and control

    SciTech Connect (OSTI)

    Sayler, G.S.; Cox, C.D.; Ripp, S.; Nivens, D.E.; Werner, C.; Ahn, Y.; Matrubutham, U. [Univ. of Tennessee, Knoxville, TN (United States); Burlage, R. [Oak Ridge National Lab., TN (United States). Environmental Sciences Div.

    1998-11-01T23:59:59.000Z

    On October 30, 1996, the US Environmental Protection Agency (EPA) commenced the first test release of genetically engineered microorganisms (GEMs) for use in bioremediation. The specific objectives of the investigation were multifaceted and include (1) testing the hypothesis that a GEM can be successfully introduced and maintained in a bioremediation process, (2) testing the concept of using, at the field scale, reporter organisms for direct bioremediation process monitoring and control, and (3) acquiring data that can be used in risk assessment decision making and protocol development for future field release applications of GEMs. The genetically engineered strain under investigation is Pseudomonas fluorescens strain HK44 (King et al., 1990). The original P. fluorescens parent strain was isolated from polycyclic aromatic hydrocarbon (PAH) contaminated manufactured gas plant soil. Thus, this bacterium is able to biodegrade naphthalene (as well as other substituted naphthalenes and other PAHs) and is able to function as a living bioluminescent reporter for the presence of naphthalene contamination, its bioavailability, and the functional process of biodegradation. A unique component of this field investigation was the availability of an array of large subsurface soil lysimeters. This article describes the experience associated with the release of a genetically modified microorganism, the lysimeter facility and its associated instrumentation, as well as representative data collected during the first eighteen months of operation.

  18. Organic rankine cycle system for use with a reciprocating engine

    DOE Patents [OSTI]

    Radcliff, Thomas D.; McCormick, Duane; Brasz, Joost J.

    2006-01-17T23:59:59.000Z

    In a waste heat recovery system wherein an organic rankine cycle system uses waste heat from the fluids of a reciprocating engine, provision is made to continue operation of the engine even during periods when the organic rankine cycle system is inoperative, by providing an auxiliary pump and a bypass for the refrigerant flow around the turbine. Provision is also made to divert the engine exhaust gases from the evaporator during such periods of operation. In one embodiment, the auxiliary pump is made to operate simultaneously with the primary pump during normal operations, thereby allowing the primary pump to operate at lower speeds with less likelihood of cavitation.

  19. Genetic algorithm based optimization in engineering design using fuzzy constraints and fitness functions

    E-Print Network [OSTI]

    Vijayakumar, Bhuvaneshwaran

    2001-01-01T23:59:59.000Z

    The motivation for this work has been the use of tools, such as genetic algorithms and fuzzy sets, to address the various issues that are involved in an engineering design optimization problem. In order to address the variety, generality...

  20. MECHANICAL ENGINEERING DEPARTMENT ELECTIVES* CHEM 109A (4) Organic Chemistry Bruice

    E-Print Network [OSTI]

    Fygenson, Deborah Kuchnir

    MECHANICAL ENGINEERING DEPARTMENT ELECTIVES* 2013-2014 Fall 2013 CHEM 109A (4) Organic Chemistry in Engineering Staff ME 110 Aerodynamics and Aeronautical Engineering Meinhart ME 125BE Energy Modeling Bruice ENGR 101 Ethics in Engineering Walling ENGR 103(4) Advanced Engineering Writing Holms MATRL 100A

  1. Model for Triplet State Engineering in Organic Light Emitting Diodes

    E-Print Network [OSTI]

    Prodhan, Suryoday; Ramasesha, S

    2014-01-01T23:59:59.000Z

    Engineering the position of the lowest triplet state (T1) relative to the first excited singlet state (S1) is of great importance in improving the efficiencies of organic light emitting diodes and organic photovoltaic cells. We have carried out model exact calculations of substituted polyene chains to understand the factors that affect the energy gap between S1 and T1. The factors studied are backbone dimerisation, different donor-acceptor substitutions and twisted geometry. The largest system studied is an eighteen carbon polyene which spans a Hilbert space of about 991 million. We show that for reverse intersystem crossing (RISC) process, the best system involves substituting all carbon sites on one half of the polyene with donors and the other half with acceptors.

  2. Reaction Engineering with Metal-Organic Framework Catalysts

    E-Print Network [OSTI]

    Melkonian, Arek

    2013-01-01T23:59:59.000Z

    Propylene Oxide. Chemical and Engineering News 2004, 5.orthogonal collocation. Chemical Engineering Science 1971,Temperature Cycling. Chemical Engineering Science 1980, 35,

  3. Technical Highlights April 2013 Fuels, Engines, and Emissions Research Center (FEERC) Staff Organize and Participate in Multiple Events

    E-Print Network [OSTI]

    Technical Highlights April 2013 Fuels, Engines, and Emissions Research Center (FEERC) Staff Organize and Participate in Multiple Events during Society of Automotive Engineers (SAE) World Congress in the SAE Vehicle Engineering Magazine. FEERC staff participated as organizers of multiple technical

  4. MECHANICAL ENGINEERING DEPARTMENT ELECTIVES CHEM 109A (4) Organic Chemistry Bruice

    E-Print Network [OSTI]

    Fygenson, Deborah Kuchnir

    6/19/2013 MECHANICAL ENGINEERING DEPARTMENT ELECTIVES 2013-2014 Fall 2013 CHEM 109A (4) Organic 101 Ethics in Engineering Staff ENV S 105 (4) Solar and Renewable Energy Staff MATRL 100C Fundamentals Chemistry Bruice ENGR 101 Ethics in Engineering Walling ENGR 103(4) Advanced Engineering Writing Holms MATRL

  5. Cellular computation and communications using engineered genetic regulatory networks

    E-Print Network [OSTI]

    Weiss, Ron, 1970-

    2001-01-01T23:59:59.000Z

    In this thesis, I present an engineering discipline for obtaining complex, predictable, and reliable cell behaviors by embedding biochemical logic circuits and programmed intercellular communications into cells. To accomplish ...

  6. Interactive Genetic Engineering of Evolved Video Game Content

    E-Print Network [OSTI]

    Stanley, Kenneth O.

    their effects on weapon dy- namics immediately. The effect is a new kind of "genetic en- gineering" experience is still important for the global search, players can effectively guide local searches that optimize weapon evolved content represented by artificial neural networks. In particular, particle system weapons evolved

  7. Implementation Planning for the Introduction of Knowledge Management in an Aerospace Engineering Organization

    E-Print Network [OSTI]

    Hughes, Neil

    2013-05-17T23:59:59.000Z

    The availability of information within an aerospace organization is required for engineers to perform activities. As information is considered, it’s the experience of the engineer that allows information to become knowledge for use. Knowledge...

  8. Conjugated Polymer Design and Engineering for Organic Electronics

    E-Print Network [OSTI]

    Woo, Claire Hoi Kar

    2011-01-01T23:59:59.000Z

    organic photovoltaics (OPVs), with reported efficiencies asseparation efficiency in organic photovoltaics. 15CI, a

  9. A Neural-Genetic Technique for Coastal Engineering: Determining Wave-induced

    E-Print Network [OSTI]

    Blumenstein, Michael

    A Neural-Genetic Technique for Coastal Engineering: Determining Wave-induced Seabed Liquefaction- ematical theories. The wave-induced seabed liquefaction problem is one of the most critical issues investigations into wave-induced seabed liquefaction have been carried out including numerical models, analytical

  10. Green Pacific Biologicals Rapid & stable nuclear genetic engineering of eukaryotic algae

    E-Print Network [OSTI]

    to Investors · Rapid & stable nuclear genetic engineering of eukaryotic algae · WW exclusive license Max Planck · Algae-to-biofuels, big oil, Ag-biotech, High-margin products · Proprietary solutions for higher + no large capital investments Seed-stage algae-to-biofuels start-up #12;Green Pacific Biologicals Problem

  11. The Impact of Organic Friction Modifiers on Engine Oil Tribofilms

    E-Print Network [OSTI]

    Ratoi, Monica; Alghawel, Husam; Suen, Yat Fan; Nelson, Kenneth

    2013-01-01T23:59:59.000Z

    Organic friction modifiers (OFMs) are important additives in the lubrication of machines and especially of car engines where performance improvements are constantly sought-after. Together with zinc dialkyldithiophosphates (ZDDPs) antiwear additives, OFMs have a predominant impact on the tribological behaviour of the lubricant. In the current study, the influence of OFMs on the generation, tribological properties and chemistry of ZDDP tribofilms has been investigated by combining tribological experiments (MTM) with in-situ film thickness measurements through optical interference imaging (SLIM), Alicona profilometry and X-ray photoelectron spectroscopy. OFMs and antiwear additives have been found to competitively react/adsorb on the rubbing ferrous substrates in a tribological contact. The formation and removal (through wear) of tribofilms are dynamic processes which result from the simultaneous interaction of these two additives with the surface of the wear track. By carefully selecting the chemistry of OFMs, ...

  12. Self-Organization of Innate Face Preferences: Could Genetics Be Expressed Through Learning?

    E-Print Network [OSTI]

    2000-01-01T23:59:59.000Z

    Self-organizing models develop realistic cortical structures when given approximations of the visual environment as input, and are an effective way to model the development of face recognition abilities. However, environment-driven self-organization alone cannot account for the fact that newborn human infants will preferentially attend to face-like stimuli even immediately after birth. Recently it has been proposed that internally generated input patterns, such as those found in the developing retina and in PGO waves during REM sleep, may have the same effect on self-organization as does the external environment. Internal pattern generators constitute an efficient way to specify, develop, and maintain functionally appropriate perceptual organization. They may help express complex structures from minimal genetic information, and retain this genetic structure within a highly plastic system. Simulations with the CRF-LISSOM model show that such preorganization can account fo...

  13. Conjugated Polymer Design and Engineering for Organic Electronics

    E-Print Network [OSTI]

    Woo, Claire Hoi Kar

    2011-01-01T23:59:59.000Z

    W. ; Forrest, S. R. Organic Electronics 2003, 4, 77-87. (24)Aspects of Organic Electronics: From Fundamentals toof solution-processed organic electronics rapidly advancing,

  14. Supporting Knowledge Reuse: A Field Study of Service Engineers in a High-Reliability Organization

    E-Print Network [OSTI]

    Lutters, Wayne G.

    Supporting Knowledge Reuse: A Field Study of Service Engineers in a High-Reliability Organization, lutters@ics.uci.edu Abstract This dissertation examines knowledge work in a high- reliability organization. Specifically, it explores the distributed problem solving behavior of service engineers, and their analytic

  15. Technical & Biosystems Engineering, Industrial Technology, and Packaging Services Organizations Hiring Students in Technical & Biosystems Engineering, Industrial Technology, and Packaging

    E-Print Network [OSTI]

    Faurecia FCA Packaging Fischer Controls Fusion PKG Gavilon, LLC General Motors George W. Auch Geotex,000 57,000 12 Engineer, General 56,513 33,000 80,000 34 Equipment Test Technician 46,000 32,000 60,000 510 Technical & Biosystems Engineering, Industrial Technology, and Packaging Services Organizations

  16. Supporting Knowledge Reuse: A Field Study of Service Engineers in a High-Reliability Organization

    E-Print Network [OSTI]

    Lutters, Wayne G.

    Supporting Knowledge Reuse: A Field Study of Service Engineers in a High-Reliability Organization. A senior service engineer is already on the phone with the ground crew. She has dropped all other jobs of minutes. The plane is still loaded and sitting at the gate. The engineers at TransGulf and at Global

  17. Organizational structure : management techniques and lessons learned in aligning technical and program management resources in engineering-intensive organizations

    E-Print Network [OSTI]

    Siddiqui, Talha, 1969-

    2005-01-01T23:59:59.000Z

    The roles of systems engineering, program and project management, and engineering management are continuously blurred and challenged in complex engineering organizations. The demands made of each of these functions can ...

  18. Thermal engine driven heat pump for recovery of volatile organic compounds

    DOE Patents [OSTI]

    Drake, Richard L. (Schenectady, NY)

    1991-01-01T23:59:59.000Z

    The present invention relates to a method and apparatus for separating volatile organic compounds from a stream of process gas. An internal combustion engine drives a plurality of refrigeration systems, an electrical generator and an air compressor. The exhaust of the internal combustion engine drives an inert gas subsystem and a heater for the gas. A water jacket captures waste heat from the internal combustion engine and drives a second heater for the gas and possibly an additional refrigeration system for the supply of chilled water. The refrigeration systems mechanically driven by the internal combustion engine effect the precipitation of volatile organic compounds from the stream of gas.

  19. How to develop and deploy system integrators within component-focused engineering organizations

    E-Print Network [OSTI]

    Stevens, Michelle P., 1974-

    2005-01-01T23:59:59.000Z

    Thesis statement: The purpose of this thesis is to provide a roadmap for how a component-focused engineering company can effectively introduce system integrators in their organization. To this end, the question of how to ...

  20. Evaluation of terrestrial microcosms for assessing the fate and effects of genetically engineered microorganisms on ecological processes

    SciTech Connect (OSTI)

    Fredrickson, J.K.; Bentjen, S.A.; Bolton, H. Jr.; Li, S.W.; Ligotke, M.W.; McFadden, K.M.; Van Voris, P.

    1989-04-01T23:59:59.000Z

    This project evaluates and modifies the existing US Environmental Protection Agency's Office of Pesticides and Toxic Substances (EPA/OPTS) terrestrial microcosm test system and test protocols such that they can be used to determine the environmental fate and ecological hazards of genetically engineered microorganisms (GEMs). The intact soil-core microcosm represents terrestrial ecosystems, and when coupled with appropriate test protocols, such microcosms may be appropriate to define and limit risks associated with the intentional release of GEMs. The terrestrial microcosm test system was used to investigate the survival and transport of two model GEMs (Azospirillum lipoferum and Pseudomonas sp. Tn5 mutants) to various trophic levels and niches and through intact soil cores. Subsequent effects on nutrient cycling and displacement of indigenous microorganisms were evaluated. The model organisms were a diazotrophic root-colonizing bacterium (A. lipoferum) and a wheat root growth-inhibiting rhizobacterium (Pseudomonas sp.). The transposable element Tn5 was used as a genetic marker for both microorganisms in two separate experiments. The organisms were subjected to transposon mutagenesis using a broad host-range-mobilizable suicide plasmid. The transposon Tn5 conferred levels of kanamycin resistance up to 500 ..mu..g/ml (Pseudomonas sp.), which allowed for selection of the bacteria from environmental samples. The presence of Tn5 DNA in the genome of the model GEMs also allowed the use of Tn5 gene probes to confirm and enumerate the microorganisms in different samples from the microcosms. Two types of root growth-inhibiting Pseudomonas sp. Tn5 mutants were obtained and used in microcosm studies: those that lacked the ability to inhibit either wheat root growth or the growth of other microorganisms in vitro (tox/sup /minus//) and those which retained these properties (tox/sup +/). 53 refs., 7 figs., 6 tabs.

  1. Evaluation of terrestrial microcosms for detection, fate, and survival analysis of genetically engineered microorganisms and their recombinant genetic material

    SciTech Connect (OSTI)

    Fredrickson, J.K.; Seidler, R.J.

    1989-02-01T23:59:59.000Z

    The research included in this document represents the current scientific information available regarding the applicability of terrestrial microcosms and related methodologies for evaluating detection methods and the fate and survival of microorganisms in the environment. The three terrestrial microcosms described in this document were used to evaluate the survival and fate of recombinant bacteria in soils and in association with plant surfaces and insects and their transport through soil with percolating water and root systems, and to test new methods and procedures to improve detection and enumeration of bacteria in soil. Simple (potting soil composed of peat mix and perlite, lacking environmental control and monitoring) and complex microcosms (agricultural soil with partial control and monitoring of environmental conditions) were demonstrated to be useful tools for preliminary assessments of microbial viability in terrestrial ecosystems. These studies evaluated the survival patterns of Enterobacter cloacae (pBR322) in soil and on plant surfaces and the ingestion of this same microorganism by cutworms and survival in the foregut and frass. The Versacore microcosm design was used to monitor the fate and competitiveness of genetically engineered bacteria in soil. Both selective media and gene probes were used successfully to follow the fate of two recombinant Pseudomonas sp. introduced into Versacore microcosms. Intact soil-core microcosms were employed to evaluate the fate and transport of genetically altered Azospirillum sp. and Pseudomonas sp. in soil and the plant rhizosphere. The usefulness of these various microcosms as a tool for risk assessment is underscored by the ease in obtaining soil from a proposed field release site to evaluate subsequent GEM fate and survival.

  2. Study and analysis of best practices for the development of systems engineers at a multi-national organization

    E-Print Network [OSTI]

    Dubey, Rajeev

    2006-01-01T23:59:59.000Z

    Thesis statement: The purpose of this thesis is threefold: * Define the role and need of systems engineers/integrators within a large organization. * Analyze the system engineering procedures and availability of systems ...

  3. Engineering Organic/inorganic hybrids comprise a mixture of oxide

    E-Print Network [OSTI]

    of potential applications in coatings, fuel cells, solar cells, and sensors. Organic amino (-NH2) silane in the CO2 adsorption and desorption temperature as well as the sorbent's heat capacity govern the operating cost of the CO2 capture process. The key challenge in scaling up the process of amino silica is its

  4. UNCORRECTEDPROOF Please cite this article in press as: Liu X, et al. Genetic engineering of a modified herpes simplex virus 1 vaccine vector. Vaccine (2009),

    E-Print Network [OSTI]

    Knipe, David M.

    2009-01-01T23:59:59.000Z

    of a modified herpes simplex virus 1 vaccine vector. Vaccine (2009), doi:10.1016/j.vaccine.2009.03.003 ARTICLEUNCORRECTEDPROOF Please cite this article in press as: Liu X, et al. Genetic engineering journal homepage: www.elsevier.com/locate/vaccine Genetic engineering of a modified herpes simplex virus 1

  5. Over production of lignocellulosic enzymes of Coriolus versicolor by genetic engineering methodology. Final report

    SciTech Connect (OSTI)

    Williams, A.L.

    1998-07-01T23:59:59.000Z

    The project seeks to understand the biological and chemical processes involved in the secretion of the enzyme polyphenol oxidase (PPO) by the hyphae, the basic unit of the filamentous fungus Coriolus versicolor. These studies are made to determine rational strategies for enhanced secretion of PPO, both with the use of recombinant DNA techniques and without. This effort focuses on recombinant DNA techniques to enhance enzyme production. The major thrust of this project was two-fold: to mass produce C. versicolor tyrosinase (polyphenol oxidase) by genetic engineering as well as cultural manipulations; and to utilize PPO as a biocatalyst in the processing of lignocellulose as a renewable energy resource. In this study, the assessment of genomic and cDNA recombinant clones with regards to the overproduction of PPO continued. Further, immunocytochemical techniques were employed to assess the mechanism(s) involved in the secretion of PPO by the hyphae. Also, factors influencing PPO secretion were examined.

  6. Draft Genome Sequence of the Polycyclic Aromatic Hydrocarbon-Degrading, Genetically Engineered Bioluminescent Bioreporter Pseudomonas fluorescens HK44

    SciTech Connect (OSTI)

    Chauhan, Archana [ORNL; Layton, Alice [University of Tennessee, Knoxville (UTK); Williams, Daniel W [ORNL; Smart, Abby E. [University of Tennessee, Knoxville (UTK); Ripp, Steven Anthony [ORNL; Karpinets, Tatiana V [ORNL; Brown, Steven D [ORNL; Sayler, Gary Steven [ORNL

    2011-01-01T23:59:59.000Z

    Pseudomonas fluorescens strain HK44 (DSM 6700) is a genetically engineered lux-based bioluminescent bioreporter. Here we report the draft genome sequence of strain HK44. Annotation of {approx}6.1 Mb sequence indicates that 30% of the traits are unique and distributed over 5 genomic islands, a prophage and two plasmids.

  7. The debate surrounding the dangers posed by genetically modified organisms is becoming emotional and increasingly removed from the scientific context particularly when it

    E-Print Network [OSTI]

    , Philip Roth), is ulti- mately very strange (genetically modified food, Wall Street, George W. Bush)." How on earth did we reach the point where genetically modified food became a cultural difference betweenThe debate surrounding the dangers posed by genetically modified organisms is becoming emotional

  8. Holonic Stigmergy as a Mechanism for Engineering Self-Organizing Applications Stefan Grobbelaar Mihaela Ulieru

    E-Print Network [OSTI]

    Ulieru, Mihaela

    Holonic Stigmergy as a Mechanism for Engineering Self-Organizing Applications Stefan Grobbelaar@ict.tuwien.ac.at ulieu@unb.ca Key Words: Holonic Stigmergy, Agent Architecture, Context Model, Imposed vs. Intended Goals, Power-Saving Holarchy Abstract: We introduce the concept of holonic stigmergy as a mechanism for tuning

  9. RC-1 organic Rankine bottoming cycle for an adiabatic diesel engine. Final report

    SciTech Connect (OSTI)

    DiNanno, L.R.; DiBella, F.A.; Koplow, M.D.

    1983-12-01T23:59:59.000Z

    A system analysis and preliminary design were conducted for an organic Rankine-cycle system to bottom the high-temperature waste heat of an adiabatic diesel engine. The bottoming cycle is a compact package that includes a cylindrical air-cooled condenser-regenerator module and other unique features. The bottoming cycle output is 56 horsepower at design point conditions when compounding the reference 317 horsepower turbocharged (TC) diesel engine with a resulting brake specific fuel consumption of 0.268 lb/hp-hr for the compound engine. The bottoming cycle when applied to a turbocompound (TCPD) diesel delivers a compound engine brake specific fuel consumption of 0.258 lb/hp-hr. This system for heavy-duty trnsport applications uses the organic working fluid RC-1, which is a mixture of 60 mole percent pentafluorobenzene (PFB) and 40 mole percent hexafluorobenzene (HFB). Included in these 1983 work efforts was the thermal stability testing of the RC-1 organic fluid in a dynamic fluid test loop that simulates the operation of Rankine-cycle. More than 1600 hours of operation were completed with results showing that the RC-1 is thermally stable up to 900/sup 0/F. This report describes the work performed for one of the multiple contracts awarded under the Department of Energy's Heavy-Duty Transport Technology Program.

  10. Engineered sensors and genetic regulatory networks for control of cellular metabolism

    E-Print Network [OSTI]

    Moser, Felix, Ph. D. Massachusetts Institute of Technology

    2013-01-01T23:59:59.000Z

    Complex synthetic genetic programs promise unprecedented control over cellular metabolism and behavior. In this thesis, I describe the design and development of a synthetic genetic program to detect conditions underlying ...

  11. Pre-Approved1 Chemical Engineering Technical Electives (NOTE: Technical Electives Engineering Electives Bioengineering Electives)2

    E-Print Network [OSTI]

    Dyer, Bill

    EELE 250 Circuits, Devices, and Motors [F,S] 4 EENV 340 Principles of Environmental Engineering [F,S] 3Pre-Approved1 Chemical Engineering Technical Electives (NOTE: Technical Electives Engineering Biochemistry of Macromolecules [F] 3 BIOB 256 Intro Biol: Cells to Organisms [S] 3+1 BIOB 375 General Genetics

  12. Organic gas emissions from a stoichiometric direct injection spark ignition engine operating on ethanol/gasoline blends

    E-Print Network [OSTI]

    Kar, Kenneth

    The organic gas emissions from a stoichiometric direct injection spark ignition engine operating on ethanol/gasoline blends have been assessed under warmed-up and cold idle conditions. The speciated emissions show that the ...

  13. Modeling Sparse Engine Test Data Using Genetic Programming Chevron Information Technology Company

    E-Print Network [OSTI]

    Fernandez, Thomas

    , average camshaft plus lifter wear, maximum camshaft plus lifter wear, average engine sludge, oil ring land-world meaning. We hope the results of this study would benefit other engine oil modeling applications. 1 INTRODUCTION Laboratory engine tests are among the tools used to measure engine oil performance. These tests

  14. B2250 Laboratory 2 -PROTEIN ELECTROPHORESIS Many or most of the organisms of interest to geneticists lack the detailed genetic map and

    E-Print Network [OSTI]

    Innes, David J.

    B2250 Laboratory 2 - PROTEIN ELECTROPHORESIS Many or most of the organisms of interest to geneticists lack the detailed genetic map and wealth of morphological mutants found in Drosophila. Genetic studies of such species can instead make use of the many genes that code for enzymatic proteins

  15. “Programmed Nanomaterial Assemblies in Large Scales: Applications of Synthetic and Genetically- Engineered Peptides to Bridge Nano-Assemblies and Macro-Assemblies”

    SciTech Connect (OSTI)

    Matsui, Hiroshi

    2014-09-09T23:59:59.000Z

    Work is reported in these areas: Large-scale & reconfigurable 3D structures of precise nanoparticle assemblies in self-assembled collagen peptide grids; Binary QD-Au NP 3D superlattices assembled with collagen-like peptides and energy transfer between QD and Au NP in 3D peptide frameworks; Catalytic peptides discovered by new hydrogel-based combinatorial phage display approach and their enzyme-mimicking 2D assembly; New autonomous motors of metal-organic frameworks (MOFs) powered by reorganization of self-assembled peptides at interfaces; Biomimetic assembly of proteins into microcapsules on oil-in-water droplets with structural reinforcement via biomolecular recognition-based cross-linking of surface peptides; and Biomimetic fabrication of strong freestanding genetically-engineered collagen peptide films reinforced by quantum dot joints. We gained the broad knowledge about biomimetic material assembly from nanoscale to microscale ranges by coassembling peptides and NPs via biomolecular recognition. We discovered: • Genetically-engineered collagen-like peptides can be self-assembled with Au NPs to generate 3D superlattices in large volumes (> ?m{sup 3}). • The assembly of the 3D peptide-Au NP superstructures is dynamic and the interparticle distance changes with assembly time as the reconfiguration of structure is triggered by pH change; • QDs/NPs can be assembled with the peptide frameworks to generate 3D superlattices and these QDs/NPs can be electronically coupled for the efficient energy transfer; • The controlled assembly of catalytic peptides mimicking the catalytic pocket of enzymes can catalyze chemical reactions with high selectivity; • For the bacteria-mimicking swimmer fabrication, peptide-MOF superlattices can power translational and propellant motions by the reconfiguration of peptide assembly at the MOF-liquid interface.

  16. Engineered ascorbate peroxidase as a genetically encoded reporter for electron microscopy

    E-Print Network [OSTI]

    Deerinck, Thomas J

    Electron microscopy (EM) is the standard method for imaging cellular structures with nanometer resolution, but existing genetic tags are inactive in most cellular compartments[superscript 1] or require light and can be ...

  17. A Candida albicans CRISPR system permits genetic engineering of essential genes and gene families

    E-Print Network [OSTI]

    Fink, Gerald R.

    Candida albicans is a pathogenic yeast that causes mucosal and systematic infections with high mortality. The absence of facile molecular genetics has been a major impediment to analysis of pathogenesis. The lack of meiosis ...

  18. Speciated Engine-Out Organic Gas Emissions from a PFI-SI Engine Operating on Ethanol/Gasoline Mixtures

    E-Print Network [OSTI]

    Kar, Kenneth

    Engine-out HC emissions from a PFI spark ignition engine were measured using a gas chromatograph and a flame ionization detector (FID). Two port fuel injectors were used respectively for ethanol and gasoline so that the ...

  19. Bioremediation of the organophosphate methyl parathion using genetically engineered and native organisms

    E-Print Network [OSTI]

    Diaz Casas, Adriana Z.

    2005-11-01T23:59:59.000Z

    Toxic waste disposal problems have become enormous due to the proliferation of xenobiotic compounds for use in agricultural, industrial and numerous other applications. Organophosphate (OP) pesticides are commonly used in agriculture...

  20. Qualitative risk assessment for adventitious presence of unauthorized genetically modified organisms

    E-Print Network [OSTI]

    Bohanec, Marko

    organisms Martin Znidarsic1 , Marko Bohanec1,2 , Esther J. Kok3 , Theo W. Prins3 ABSTRACT The adventitious-1000 Ljubljana, Slovenia (martin.znidarsic@ijs.si, +386 1 477 3366) 2 University of Nova Gorica

  1. Establishment of the mathematical model for diagnosing the engine valve faults by genetic

    E-Print Network [OSTI]

    Fernandez, Thomas

    in a six- cylinders/four-stroke cycle diesel engine, i.e. normal condition, valve-tappet clearance and gas for diagnosing the faults occurring in rotor-bearing system, but current computer programs cannot easily distinguish the orbit shapes automatically. Likewise, when diagnosing the faults in a rolling-element bearing

  2. Interdisciplinary Engineer

    Broader source: Energy.gov [DOE]

    This position is located in the Transmission Engineering (TEL) organization of Engineering and Technical Services (TE), Transmission Services (T), Bonneville Power Administration (BPA). In this...

  3. Ordered quantum dot molecules and single quantum dots formed by self-organized anisotropic strain engineering

    SciTech Connect (OSTI)

    Lippen, T. van; Noetzel, R.; Hamhuis, G.J.; Wolter, J.H. [European Institute of Telecommunication Technologies/Communication Technology, Basic Research and Applications (eiTT/COBRA) Inter-University Research Institute, Eindhoven University of Technology, 5600 MB Eindhoven (Netherlands)

    2005-02-15T23:59:59.000Z

    An ordered lattice of lateral InAs quantum dot (QD) molecules is created by self-organized anisotropic strain engineering of an (In,Ga)As/GaAs superlattice (SL) template on GaAs(311)B by molecular-beam epitaxy, constituting a Turing pattern in solid state. The SL template and InAs QD growth conditions, such as the number of SL periods, growth temperatures, amount and composition of deposited (In,Ga)As, and insertion of Al-containing layers, are studied in detail for an optimized QD ordering within and among the InAs QD molecules on the SL template nodes, which is evaluated by atomic force microscopy. The average number of InAs QDs within the molecules is controlled by the thickness of the upper GaAs separation layer on the SL template and the (In,Ga)As growth temperature in the SL. The strain-correlated growth in SL template formation and QD ordering is directly confirmed by high-resolution x-ray diffraction. Ordered arrays of single InAs QDs on the SL template nodes are realized for elevated SL template and InAs QD growth temperatures together with the insertion of a second InAs QD layer. The InAs QD molecules exhibit strong photoluminescence (PL) emission up to room temperature. Temperature-dependent PL measurements exhibit an unusual behavior of the full width at half maximum, indicating carrier redistribution solely within the QD molecules.

  4. Electrical Engineer

    Broader source: Energy.gov [DOE]

    The incumbent in this position will serve as an Electrical Engineer in the Strategy and Program Management organization of Transmission Services. The Strategy and Program Management organization is...

  5. Analysis of C1, C2, and C10 through C33 particle-phase and semi-volatile organic compound emissions from heavy-duty diesel engines

    E-Print Network [OSTI]

    Wu, Mingshen

    from heavy-duty diesel engines Z. Gerald Liu a,*, Devin R. Berg a , Victoria N. Vasys a , Melissa E 18 November 2009 Keywords: Organic compound emissions Particulate matter emissions Heavy-duty diesel engines Aftertreatment technology Diesel particulate filter Chemical speciation a b s t r a c t To meet

  6. ENGINEERING

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ENGINEERING the Future of ENERGY Regional University Alliance National Energy Technology Laboratory Office of Research and Development The Future of Energy The time to redraw...

  7. Evaluation and synthesis of methods for measuring system engineering efficacy with a project and organization

    E-Print Network [OSTI]

    Flynn, Timothy Daniel

    2007-01-01T23:59:59.000Z

    The need for robust systems engineering in product development has been understood by those developing product in the aerospace and defense industries since the days of the Atlas ballistic missile program. In recent times ...

  8. Engineering Systems Matrix: An organizing framework for modeling large-scale complex systems

    E-Print Network [OSTI]

    Bartolomei, Jason E.

    The scope and complexity of engineered systems are ever-increasing as burgeoning global markets, unprecedented technological capabilities, rising consumer expectations, and ever-changing social requirements present difficult ...

  9. Systems engineering study: tank 241-C-103 organic skimming,storage, treatment and disposal options

    SciTech Connect (OSTI)

    Klem, M.J.

    1996-10-23T23:59:59.000Z

    This report evaluates alternatives for pumping, storing, treating and disposing of the separable phase organic layer in Hanford Site Tank 241-C-103. The report provides safety and technology based preferences and recommendations. Two major options and several varations of these options were identified. The major options were: 1) transfer both the organic and pumpable aqueous layers to a double-shell tank as part of interim stabilization using existing salt well pumping equipment or 2) skim the organic to an above ground before interim stabilization of Tank 241-C-103. Other options to remove the organic were considered but rejected following preliminary evaluation.

  10. Effect of Biodiesel Blending on the Speciation of Soluble Organic Fraction from a Light Duty Diesel Engine

    SciTech Connect (OSTI)

    Strzelec, Andrea [ORNL] [ORNL; Storey, John Morse [ORNL] [ORNL; Lewis Sr, Samuel Arthur [ORNL] [ORNL; Daw, C Stuart [ORNL] [ORNL; Foster, Prof. Dave [University of Wisconsin] [University of Wisconsin; Rutland, Prof. Christopher J. [University of Wisconsin] [University of Wisconsin

    2010-01-01T23:59:59.000Z

    Soy methyl ester (SME) biodiesel was volumetrically blended with 2007 certification ultra low sulfur diesel (ULSD) fuel and run in a 1.7L direct-injection common rail diesel engine at one speed-load point (1500rpm, 2.6bar BMEP). Engine fueling rate and injection timing were adjusted to maintain a constant load, while particulate samples were collected in a diesel particulate filter (DPF) and with a dilution tunnel sampling train. The samples collected at these two locations were found to contain different levels of soluble organic fraction (SOF) and the different hydrocarbon species in the SOF. This observation indicates that traditional SOF measurements, in light of the specific sampling procedure used, may not be appropriate to DPF applications.

  11. Improved Wood Properties Through Genetic Manipulation: Engineering of Syringyl Lignin in Softwood Species Through Xylem-Specific Expression of Hardwood Syringyl Monolignol Pathway Genes

    SciTech Connect (OSTI)

    Chandrashekhar P. Joshi; Vincent L. Chiang

    2009-01-29T23:59:59.000Z

    Project Objective: Our long-term goal is to genetically engineer higher value raw materials with desirable wood properties to promote energy efficiency, international competitiveness, and environmental responsiveness of the U.S. forest products industry. The immediate goal of this project was to produce the first higher value softwood raw materials engineered with a wide range of syringyl lignin quantities. Summary: The most important wood property affecting directly the levels of energy, chemical and bleaching requirements for kraft pulp production is lignin. Softwoods contain almost exclusively chemically resistant guaiacyl (G) lignin, whereas hardwoods have more reactive or easily degradable lignins of the guaiacyl (G)-syringyl (S) type. It is also well established that the reactive S lignin component is the key factor that permits much lower effective alkali and temperature, shorter pulping time and less bleaching stages for processing hardwoods than for softwoods. Furthermore, our pulping kinetic study explicitly demonstrated that every increase in one unit of the lignin S/G ratio would roughly double the rate of lignin removal. These are clear evidence that softwoods genetically engineered with S lignin are keys to revolutionizing the energy efficiency and enhancing the environmental performance of this industry. Softwoods and hardwoods share the same genetic mechanisms for the biosynthesis of G lignin. However, in hardwoods, three additional genes branch out from the G-lignin pathway and become specifically engaged in regulating S lignin biosynthesis. In this research, we simultaneously transferred aspen S-specific genes into a model softwood, black spruce, to engineer S lignin.

  12. Post-Industrial Engineering: Computer Science and the Organization of White-Collar Work, 1945-1975

    E-Print Network [OSTI]

    Mamo, Andrew Benedict

    2011-01-01T23:59:59.000Z

    automation, and industrial engineering. Looking over thePost-Industrial Engineering: Computer Science and theSpring 2011 Post-Industrial Engineering: Computer Science

  13. Panoramic view of electrochemical pseudocapacitor and organic solar cell research in molecularly engineered energy materials (MEEM)

    E-Print Network [OSTI]

    2014-01-01T23:59:59.000Z

    al. The State of Organic Solar Cells?A Meta Analysis. Sol.Efficiency in Polymer Solar Cells. Adv. Funct. Mater. 2009,Bulk- Heterojunction Solar Cells. J. Phys. Chem. C 2011,

  14. Optimization of the Calibration for an Internal Combustion Engine Management System Using Multi-Objective Genetic Algorithms

    E-Print Network [OSTI]

    Coello, Carlos A. Coello

    Optimization of the Calibration for an Internal Combustion Engine Management System Using Multi, the level of complexity of internal combustion engines is increasing steadily and the number of these problems, almost since the advent of electronics control of internal combustion engines, finding a way

  15. Engines

    SciTech Connect (OSTI)

    Enga, B.E.

    1981-08-25T23:59:59.000Z

    This invention relates to Stirling engines and to improved methods of operation whereby catalytic oxidation of a major proportion of the fuel takes place in the external combustor. An external combustion unit of a Stirling engine comprises a catalytic combustor having a thermally stable and oxidation resistant monolith made from and/or carrying a catalytic material and including a multiplicity of flow paths for catalytic combustion of combustible gases and injected fuel. The use of a catalytic combustor in accordance with this invention enables a Stirling or other engine fitted therewith to be used in areas such as mines and underwater installations where conventional flame combustion is impracticable or is controlled by stringent regulations.

  16. Investigation of Nitro-Organic Compounds in Diesel Engine Exhaust: Final Report, February 2007 - April 2008

    SciTech Connect (OSTI)

    Dane, J.; Voorhees, K. J.

    2010-06-01T23:59:59.000Z

    The National Renewable Energy Laboratory upgraded its ReFUEL engine and vehicle testing facility to speciate unregulated gas-phase emissions. To complement this capability, the laboratory contracted with the Colorado School of Mines (CSM) to study the effects of soy biodiesel fuel and a diesel particle filter (DPF) on emissions of polycyclic aromatic hydrocarbons (PAH) and nitro-polycyclic aromatic hydrocarbons (NPAH). CSM developed procedures to sample diesel particulate matter (PM) emissions from raw and diluted exhaust, with and without a DPF. They also developed improved procedures for extracting PAH and NPAH from the PM and quantifying them with a gas chromatograph-electron monochromator mass spectrometer. The study found the DPF generally reduced PAH emissions by 1 to 3 orders of magnitude. PAH conversion was lowest for B100, suggesting that PAHs were forming in the DPF. Orders of magnitude reductions were also found for NPAH emissions exiting the DPF.

  17. Natural and Organic Beef Max Irsik DVM, MAB

    E-Print Network [OSTI]

    Watson, Craig A.

    protein or by-products. Feed must not have been exposed to pesticides, fertilizers made from synthetic the harvest of an organic crop. · The use of genetic engineering, ionizing radiation and sewer sludge, crop rotation and cover crops, supplemented with animal and crop waste materials and allowed synthetic

  18. Engineering

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMFormsGasReleaseSpeeches Energy Speeches RSS June 25,Engineering

  19. Engineering

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8, 2000Consumption SurveyEnergyphysicist Dave JohnsonEngineering

  20. Ameliorating risk: Culturable and metagenomic monitoring of the 14 year decline of a genetically engineered microorganism at a bioremediation field site

    SciTech Connect (OSTI)

    Layton, Alice [University of Tennessee, Knoxville (UTK); Smart, Abby E. [University of Tennessee, Knoxville (UTK); Chauhan, Archana [University of Tennessee, Knoxville (UTK); Ripp, Steven Anthony [University of Tennessee, Knoxville (UTK); Williams, Daniel [University of Tennessee, Knoxville (UTK); Burton, Whitney [University of Tennessee, Knoxville (UTK); Moser, Scott [University of Tennessee, Knoxville (UTK); Phillips, Jana Randolph [ORNL; Palumbo, Anthony Vito [ORNL; Sayler, Gary [University of Tennessee, Knoxville (UTK)

    2012-01-01T23:59:59.000Z

    Pseudomonas fluorescens HK44 represented the first genetically engineered microorganism to be approved in the United States for field release for applications related to subsurface soil bioremediation. In October 1996, strain HK44 was introduced into a replicated semi-contained array of soil lysimeters where its luciferase (luxCDABE)-based bioluminescent response to soil-borne polycyclic aromatic hydrocarbon (PAH) contaminants was detected and monitored for the next two years. At the termination of this experiment, it was decided that the lysimeters remain available for future longer-term monitoring efforts, and were thus covered and left essentially undisturbed until the initiation of a large sampling event in 2010, fourteen years after the original release. Although after extensive sampling culturable HK44 cells were not found, additional molecular and metagenomic analyses indicated that genetic signatures of HK44 cells still persisted, with genes diagnostic for the bioluminescent transposon carried by strain HK44 (luxA and tetA) being found at low concentrations (< 5000 copies/g).

  1. Engineering Engineering

    E-Print Network [OSTI]

    Maroncelli, Mark

    T A C T i N f O r M A T i O N #12;4 engineering is the profession in which a knowledge of advancedEngineering Engineering Technology & A T P E N N S T A T E 2 0 1 0 ­ 2 0 1 1 #12;2 Join us at penn state! Since 1896, Penn State has been a leader in engineering and engineering technology education

  2. Genetically Enhanced Sorghum and Sugarcane: Engineering Hydrocarbon Biosynthesis and Storage together with Increased Photosynthetic Efficiency into the Saccharinae

    SciTech Connect (OSTI)

    None

    2012-02-15T23:59:59.000Z

    PETRO Project: UIUC is working to convert sugarcane and sorghum—already 2 of the most productive crops in the world—into dedicated bio-oil crop systems. Three components will be engineered to produce new crops that have a 50% higher yield, produce easily extractable oils, and have a wider growing range across the U.S. This will be achieved by modifying the crop canopy to better distribute sunlight and increase its cold tolerance. By directly producing oil in the shoots of these plants, these biofuels could be easily extracted with the conventional crushing techniques used today to extract sugar.

  3. Post-Industrial Engineering: Computer Science and the Organization of White-Collar Work, 1945-1975

    E-Print Network [OSTI]

    Mamo, Andrew Benedict

    2011-01-01T23:59:59.000Z

    and-control, automation, and industrial engineering. LookingA Social History of Industrial Automation. New York: Oxfordthe challenges of industrial automation and the shift toward

  4. Band alignment engineering in organized rrP3HT/C60 bulk heterojunction Arnaud Maillard

    E-Print Network [OSTI]

    Rochefort, Alain

    ­5]. However, the power conversion efficiency of organic photovoltaic cells has to reach a minimal 10% target [10­12]. Therefore, before attaining the 10% target with high-efficiency BHJ organic photovoltaic) molecule is more often used in high-efficiency organic photovoltaic cells [4]. Nevertheless, one may assume

  5. 2007 Plant Metabolic Engineering Gordon Conference and Graduate Research Seminar

    SciTech Connect (OSTI)

    Erich Grotewold

    2008-09-15T23:59:59.000Z

    Plant Metabolic Engineering is an emerging field that integrates a diverse range of disciplines including plant genetics, genomics, biochemistry, chemistry and cell biology. The Gordon-Kenan Graduate Research Seminar (GRS) in Plant Metabolic Engineering was initiated to provide a unique opportunity for future researcher leaders to present their work in this field. It also creates an environment allowing for peer-review and critical assessment of work without the intimidation usually associated with the presence of senior investigators. The GRS immediately precedes the Plant Metabolic Engineering Gordon Research Conference and will be for and by graduate students and post-docs, with the assistance of the organizers listed.

  6. INDUSTRIAL ENGINEERING Industrial engineering is concerned

    E-Print Network [OSTI]

    INDUSTRIAL ENGINEERING Industrial engineering is concerned with looking at the "big picture" of systems that allow organizations and individuals to perform at their best. Industrial engineers bridge should be used and how they should be used. The focus of industrial engineering is on process improvement

  7. INDUSTRIAL ENGINEERING Industrial engineering is concerned

    E-Print Network [OSTI]

    INDUSTRIAL ENGINEERING Industrial engineering is concerned with looking at the "big picture" of systems that allow organizations and individuals to perform at their best. Industrial engineers bridge should be used and how they should be used. Industrial engineers design and run the factories and systems

  8. Engineering Engineering

    E-Print Network [OSTI]

    Keinan, Alon

    of global poverty and sustainability". An ESW course, offered by Civil & Environmental Engineering, teaches as an alternative to diesel fuel, storm-water management in the Virgin Islands, and construction of a bridge here

  9. nature biotechnology advance online publication 1 1Department of Genetics, Harvard Medical School, Boston, Massachusetts, USA. 2Wyss Institute for Biologically Inspired Engineering, Harvard University, Cambridge,

    E-Print Network [OSTI]

    Church, George M.

    nature biotechnology advance online publication 1 1Department of Genetics, Harvard Medical School, Cambridge, Massachusetts, USA. 3Biological and Biomedical Sciences Program, Harvard Medical School, Boston

  10. Electrical and Computer Engineering Department of Electrical and Computer Engineering

    E-Print Network [OSTI]

    Heller, Barbara

    Electrical and Computer Engineering Department of Electrical and Computer Engineering 103 Siegel of an undergraduate degree or its equivalent in electrical engineering, computer engineering, or other engineering organizations in the metropolitan Chicago area. Degrees Offered Master of Science in Electrical Engineering

  11. Genetic Engineering for Modern Agriculture

    E-Print Network [OSTI]

    Blumwald, Eduardo

    reserved 1543-5008/10/0602-0443$20.00 Key Words abiotic stress, climate change, field conditions, global warming, stress combination, stress tolerance, transgenic crops Abstract Abiotic stress conditions such as drought, heat, or salinity cause exten- sive losses to agricultural production worldwide. Progress

  12. Public Responses to Genetic Engineering

    E-Print Network [OSTI]

    Delaware, University of

    be the successful development of large-scale sewer and water treatment tech- nologies. In a similar vein, one could breakthroughs (it is important that they cannot be imagined right now). The ozone holes produced by the use formula with unsterilized water, the introduction of this American good nevertheless expanded consumer

  13. A Genetic Algorithm Approach for Technology Characterization

    E-Print Network [OSTI]

    Galvan, Edgar

    2012-10-19T23:59:59.000Z

    A GENETIC ALGORITHM APPROACH FOR TECHNOLOGY CHARACTERIZATION A Thesis by EDGAR GALVAN Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER... OF SCIENCE August 2012 Major Subject: Mechanical Engineering A Genetic Algorithm Approach for Technology Characterization Copyright 2012 Edgar Galvan A GENETIC ALGORITHM APPROACH FOR TECHNOLOGY...

  14. Engineering Technician

    Broader source: Energy.gov [DOE]

    Alternate Title(s):Civil Engineering Technician; Electrical Engineering Technician; Mechanical Engineering Technician; Environmental Engineering Technician

  15. Adapting to contradiction : competing models of organization in the United States organic foods industry

    E-Print Network [OSTI]

    Haedicke, Michael Anthony

    2008-01-01T23:59:59.000Z

    foods that many industry members felt were not compatible with organic agriculture, including ingredients made from genetically modified plants, irradiation

  16. ORIGINAL PAPER The interdisciplinary engineering knowledge genome

    E-Print Network [OSTI]

    Shai, Offer

    ORIGINAL PAPER The interdisciplinary engineering knowledge genome Yoram Reich · Offer Shai Received, termed the ``Interdisciplinary Engineering Knowledge Genome'', which is an organized collection of system, the Interdisciplinary Engineering Knowledge Genome unifies many engineering disciplines, providing a basis

  17. Sorbent Testing for the Solidification of Organic Process Waste streams from the Radiochemical Engineering Development Center at Oak Ridge National Laboratory

    SciTech Connect (OSTI)

    Bickford, J.; Foote, M. [MSE Technology Applications, Inc., Montana (United States); Taylor, P. [Oak Ridge National Laboratory, Oak Ridge, Tennessee (United States)

    2008-07-01T23:59:59.000Z

    The U.S. Department of Energy (DOE) has tasked MSE Technology Applications, Inc. (MSE) with evaluating various sorbents to solidify the radioactive liquid organic waste from the Radiochemical Engineering Development Center (REDC) at Oak Ridge National Laboratory (ORNL). REDC recovers and purifies heavy elements (berkelium, californium, einsteinium, and fermium) from irradiated targets for research and industrial applications. Both aqueous and organic waste streams are discharged from REDC. Organic waste is generated from the plutonium/uranium extraction (PUREX), Cleanex, and Pubex processes.1 The PUREX waste derives from an organic-aqueous isotope separation process for plutonium and uranium fission products, the Cleanex waste derives from the removal of fission products and other impurities from the americium/curium product, and the Pubex waste is derived from the separation process of plutonium from dissolved targets. An aqueous waste stream is also produced from these separation processes. MSE has been tasked to test a grouting formula for the aqueous waste stream that includes specially formulated radioactive shielding materials developed by Science and Technology Applications, LLC. This paper will focus on the sorbent testing work. Based on work performed at Savannah River Site (SRS) (Refs. 1, 2), ORNL tested and evaluated three sorbents capable of solidifying the PUREX, Pubex, and Cleanex waste streams and a composite of the three organic waste streams: Imbiber Beads{sup R} IMB230301 (Imbiber Beads), Nochar A610 Petro Bond, and Petroset II Granular{sup TM} (Petroset II-G). Surrogates of the PUREX, Pubex, Cleanex, and a composite organic waste were used for the bench-scale testing. Recommendations resulting from the ORNL testing included follow-on testing by MSE for two of the three sorbents: Nochar Petro Bond and Petroset II-G. MSE recommended that another clay sorbent, Organoclay BM-QT-199, be added to the test sequence. The sorbent/surrogate combinations were tested at bench scale, 19-liter (L) [5-gallon (gal)] bucket scale, and 208-L (55-gal) drum scale. The testing performed by MSE will help ORNL select the right solidification materials and wasteform generation methods for the design of a new treatment facility. The results could also be used to help demonstrate that ORNL could meet the waste acceptance criteria for the ultimate disposal site for the waste-forms. The organics will be solidified as transuranic waste for disposal at the Waste Isolation Pilot Plant, and the aqueous waste stream will be grouted and disposed of at the Nevada Test Site as low-level waste if real waste testing indicates similar results to the surrogate testing. The objective of this work was to identify a sorbent capable of solidifying PUREX, Pubex, and Cleanex organic wastes individually and a composite of the three organic waste streams. The sorbent and surrogate combinations must also be compatible with processing equipment and maintain stability under a variety of conditions that could occur during storage/shipment of the solidified wastes. (authors)

  18. Engineering Electrical &

    E-Print Network [OSTI]

    Hickman, Mark

    Computer Engineering Electrical & Electronic Engineering Mechatronics Engineering Mechanical Engineering Civil Engineering Natural Resources Engineering Forest Engineering Chemical & Process Engineering ELECTIVE 2 Required Engineering Intermediate Year 2011 Eight Required Courses Chart: 120 points College

  19. Engineering Electrical &

    E-Print Network [OSTI]

    Hickman, Mark

    Computer Engineering Electrical & Electronic Engineering Mechatronics Engineering Mechanical Engineering Civil Engineering Natural Resources Engineering Forest Engineering Chemical & Process Engineering ELECTIVE 2 Required Engineering Intermediate Year 2012 Eight Required Courses Chart: 120 points College

  20. Carbon and Nitrogen Isotopic Signatures and Nitrogen Profile To Identify Adulteration in Organic Fertilizers

    E-Print Network [OSTI]

    Mazumder, Asit

    growth regulators such as hormones, livestock antibiotics, food additives, genetically modified organisms

  1. Engineering Engineering Education

    E-Print Network [OSTI]

    Simaan, Nabil

    E School of Engineering Engineering Education in a University Setting 292 Degree Programs in Engineering 294 Special Programs 296 Honors 298 Academic Regulations 300 Courses of Study 305 Engineering of Engineering is the largest and oldest private engineering school in the South. Classes offering engineering

  2. Genetic counseling

    E-Print Network [OSTI]

    Stough, Laura

    2014-01-01T23:59:59.000Z

    individuals looking for disease susceptibility testing to those looking to find out if a therapeutic treatment option is the right one for them (National Human Genome Research Institute, 2012). What Common Types of Genetic Disorders Are Discussed... specific therapeutic focus such as prenatal, pediatric, psychiatric, or cancer genetic counseling. The aim of genetic counseling is to support individuals in their ability to make an informed decision regarding genetic testing and the implications...

  3. Engineering, Computing and Information Systems

    E-Print Network [OSTI]

    Escher, Christine

    Manufacturing Engineering-B, P Materials Science-M, D Mechanical Engineering-B, M, D, P Nuclear Engineering-B, M Agricultural and Resource Economics-B, M, D Agricultural Education-M Agriculture-M Animal Sciences-B, M, D, P General Agriculture-B, P General Science-B*, P Genetics-M, D Geographic Information Science-GC, UC

  4. Genetic and biotechnological approaches for biofuel crop improvement.

    E-Print Network [OSTI]

    Vega-Sánchez, Miguel E; Ronald, Pamela C

    2010-01-01T23:59:59.000Z

    Plant genetic engineering for biofuel production: towardsbiomass feedstocks for biofuel production. Genome Biol 2008,3:354-359. 25. Fairless D: Biofuel: the little shrub that

  5. activate genetic pathways: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    automatically reverse engineer the network from the data. Genetic programming (Koza, Bennett, Andre, and Keane. Koza Biomedical Informatics, Department of Medicine Department of...

  6. ENGINEERING TECHNOLOGY Engineering Technology

    E-Print Network [OSTI]

    ENGINEERING TECHNOLOGY Engineering Technology Program The Bachelor of Science in Engineering Technology (BSET) is a hands-on program based upon engineering technology fundamentals, engineering for employment or further education. The focus is on current engineering technology issues and applications used

  7. Maturing Software Engineering Knowledge through Classifications

    E-Print Network [OSTI]

    Basili, Victor R.

    Maturing Software Engineering Knowledge through Classifications: A Case Study on Unit Testing contribution to advancing knowledge in both science and engineering. It is a way of investigating Engineering knowledge, as classifications constitute an organized structure of knowledge items. Till date

  8. Science & Engineering Engineering Databases

    E-Print Network [OSTI]

    Hampton, Randy

    -present. Good for computers, electronics, biomedical, control, electrical and ocean engineering, physics9/09 DK,DS Science & Engineering Library Engineering Databases How to search the engineering initials Special features: Limit to peer-reviewed journals Compendex [Engineering Index] 1884-present

  9. Adapting to contradiction : competing models of organization in the United States organic foods industry

    E-Print Network [OSTI]

    Haedicke, Michael Anthony

    2008-01-01T23:59:59.000Z

    European market to genetically modified foods. She arguesfoods that many industry members felt were not compatible with organic agriculture, including ingredients made from genetically modifiedgenetically modified crops. Below, I discuss the distinction that co-op leaders make between food-

  10. 33engineering EnginEEring and

    E-Print Network [OSTI]

    Wagner, Stephan

    33engineering EnginEEring and ThE builT EnvironmEnT www.wits.ac.za/ebe #12;34 guide for applicants 2015 The study of Engineering Career opportunities for engineers are limitless and extend beyond the formal engineering sector. A career in engineering requires special talents ­ engineers need

  11. Electrical Engineer- OPEN CONTINUOUS ANNOUNCEMENT

    Broader source: Energy.gov [DOE]

    This recruitment is an OPEN CONTINUOUS ANNOUNCEMENT (OCA) being utilized to fill current and future Electrical Engineer vacancies within BPA's Transmission Field Services organization. Positions...

  12. Mission | APS Engineering Support Division

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    APS Engineering Support Division (AES) Search Button About Welcome Overview Visiting the APS Mission & Goals Find People Organization Charts Committees Job Openings User...

  13. Electronics Engineer- OPEN CONTINUOUS ANNOUNCEMENT

    Broader source: Energy.gov [DOE]

    This recruitment is an OPEN CONTINUOUS ANNOUNCEMENT (OCA) being utilized to fill current and future Electrical Engineer vacancies within BPA's Transmission Field Services organization. Positions...

  14. Faculty of Engineering Industrial and Manufacturing

    E-Print Network [OSTI]

    Faculty of Engineering Industrial and Manufacturing Systems Engineering Industrial engineers answer the needs of organizations to operate efficiently and cost effectively. As an industrial engineer, you may of Windsor is one of only a few institutions in Ontario to offer industrial engineering. Your education

  15. 7.03 Genetics, Fall 2001

    E-Print Network [OSTI]

    Kaiser, Chris

    The principles of genetics with application to the study of biological function at the level of molecules, cells, and multicellular organisms, including humans. Structure and function of genes, chromosomes and genomes. ...

  16. Living Bacterial Sacrificial Porogens to Engineer Decellularized Porous Scaffolds

    E-Print Network [OSTI]

    Xu, Feng

    Decellularization and cellularization of organs have emerged as disruptive methods in tissue engineering and regenerative medicine. Porous hydrogel scaffolds have widespread applications in tissue engineering, regenerative ...

  17. General Engineer (Chief Engineer)

    Broader source: Energy.gov [DOE]

    This position is located in the Office of the Manager. If selected for this position you will serve as a General Engineer (Chief Engineer) in the Office of the Manager for the Department of Energy,...

  18. Combinatorial search strategies for the metabolic engineering of microorganisms

    E-Print Network [OSTI]

    Santos, Christine Nicole S. (Christine Nicole San Diego)

    2010-01-01T23:59:59.000Z

    Although the field of microbial metabolic engineering has traditionally been dominated by rational and knowledge-driven approaches, recent advances in genetic engineering have led to the emergence of a new methodology based ...

  19. Engineering Careers: Software Engineering

    E-Print Network [OSTI]

    Fenster, Sam

    of others When you screw up, you can do it on a massive scale #12;Totally unlike other engineering electronic device #12;Software tools Software engineers build their own tools The OS on your laptop;Just like other engineering Established body of knowledge Established practices Build on the work

  20. Performance of an Organic Rankine Cycle Waste Heat Recovery System...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Performance of an Organic Rankine Cycle Waste Heat Recovery System for Light Duty Diesel Engines Performance of an Organic Rankine Cycle Waste Heat Recovery System for Light Duty...

  1. Approved Module Information for CE1102, 2014/5 Module Title/Name: Organic Chemistry for Engineers Module Code: CE1102

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Module Code: CE1102 School: Engineering and Applied Science Module Type: Standard Module New Module of Delivery Learning Hours Lecture: 12 hours Tutorial: 2 hours Lab Session: 8 hours Independent Study: 80 reading, tutorial support and supervised laboratory sessions. Module Assessment Methods of Assessment

  2. College of Engineering Engineering in

    E-Print Network [OSTI]

    Lin, Zhiqun

    in engineering education · Fundamental knowledge ­ practical skills ­ leadership values · Creating · InspiringCollege of Engineering Engineering in Social Context Jonathan Wickert Dean of Engineering #12;College of Engineering Game changers of the 20th century ... · Electrification · Automobile · Airplane

  3. Introduction Systems Engineering Fundamentals ENGINEERING

    E-Print Network [OSTI]

    Rhoads, James

    Introduction Systems Engineering Fundamentals i SYSTEMS ENGINEERING FUNDAMENTALS January 2001;Systems Engineering Fundamentals Introduction ii #12;Introduction Systems Engineering Fundamentals iii ............................................................................................................................................. iv PART 1. INTRODUCTION Chapter 1. Introduction to Systems Engineering Management

  4. Modeling and control of genetic regulatory networks

    E-Print Network [OSTI]

    Pal, Ranadip

    2009-05-15T23:59:59.000Z

    MODELING AND CONTROL OF GENETIC REGULATORY NETWORKS A Dissertation by RANADIP PAL Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of DOCTOR OF PHILOSOPHY August 2007 Major... Subject: Electrical Engineering MODELING AND CONTROL OF GENETIC REGULATORY NETWORKS A Dissertation by RANADIP PAL Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of DOCTOR...

  5. nature genetics volume 22 july 1999 281 Systematic determination of genetic network architecture

    E-Print Network [OSTI]

    Church, George M.

    architecture Saeed Tavazoie1, Jason D. Hughes1,2, Michael J. Campbell3, Raymond J. Cho4 & George M. Church1 1 elucidation of genetic network architecture in sequenced organisms in which little biology is known. We

  6. Optimizing Data Measurements at Test Beds Using Multi-Step Genetic Algorithms

    E-Print Network [OSTI]

    Zell, Andreas

    during the calibration of combustion engines in an optimal way. Key-Words: - Genetic Algorithm, Traveling Algorithm, Design of Experiments. 1 Introduction The process of calibrating combustion engines is currently

  7. Association Genetics of Populus trichocarpa or Resequencing in Populus: Towards Genome Wide Association Genetics (2011 JGI User Meeting)

    SciTech Connect (OSTI)

    Tuskan, Gerry

    2011-03-23T23:59:59.000Z

    The U.S. Department of Energy Joint Genome Institute (JGI) invited scientists interested in the application of genomics to bioenergy and environmental issues, as well as all current and prospective users and collaborators, to attend the annual DOE JGI Genomics of Energy & Environment Meeting held March 22-24, 2011 in Walnut Creek, Calif. The emphasis of this meeting was on the genomics of renewable energy strategies, carbon cycling, environmental gene discovery, and engineering of fuel-producing organisms. The meeting features presentations by leading scientists advancing these topics. Gerry Tuskan of Oak Ridge National Laboratory on "Resequencing in Populus: Towards Genome Wide Association Genetics" at the 6th annual Genomics of Energy & Environment Meeting on March 23, 2011

  8. Association Genetics of Populus trichocarpa or Resequencing in Populus: Towards Genome Wide Association Genetics (2011 JGI User Meeting)

    ScienceCinema (OSTI)

    Tuskan, Gerry

    2011-06-03T23:59:59.000Z

    The U.S. Department of Energy Joint Genome Institute (JGI) invited scientists interested in the application of genomics to bioenergy and environmental issues, as well as all current and prospective users and collaborators, to attend the annual DOE JGI Genomics of Energy & Environment Meeting held March 22-24, 2011 in Walnut Creek, Calif. The emphasis of this meeting was on the genomics of renewable energy strategies, carbon cycling, environmental gene discovery, and engineering of fuel-producing organisms. The meeting features presentations by leading scientists advancing these topics. Gerry Tuskan of Oak Ridge National Laboratory on "Resequencing in Populus: Towards Genome Wide Association Genetics" at the 6th annual Genomics of Energy & Environment Meeting on March 23, 2011

  9. Electrical Engineer (Field Engineering)

    Broader source: Energy.gov [DOE]

    (See Frequently Asked Questions for more information). Where would I be working? Western Area Power Administration Sierra Nevada Region Maintenance Engineering N5500 114 Parkshore Drive Folsom, CA...

  10. Engineering Science AB: Electrical Rev. Aug 2014 1/3

    E-Print Network [OSTI]

    Engineering Science ­ AB: Electrical Rev. Aug 2014 1/3 Plan of Study for the Electrical ­ System Programming & Machine Organization ___________ Sophomore Forum ___________ Electrical Engineering ___________ ___________ ___________ ___________ #12;Engineering Science ­ AB: Electrical Rev. Aug 2014 2/3 Hardware CIRCLE ONE ES 52

  11. Environmental Engineering

    E-Print Network [OSTI]

    Wang, Hai

    CEECivil & Environmental Engineering THE SONNY ASTANI DEPARTMENT OF CIVIL & ENVIRONMENTAL ENGINEERING #12;Civil and Environmental engineers are critical in addressing the needs of civilization and human origins. Civil and Environmental Engineers create, con- struct, and manage the infrastructure

  12. & Mechanical Engineering

    E-Print Network [OSTI]

    Zhou, Chongwu

    , robotics, and the development of new tools for integrated approaches to concurrent engineeringAME Aerospace & Mechanical Engineering #12;Aerospace and Mechanical Engineers design complex Engineering (AME) students conduct basic and applied research within and across the usual disciplinary

  13. Engineering Prestigious

    E-Print Network [OSTI]

    Saskatchewan, University of

    Engineering Studious Prestigious Adventurous Curious Ambitious Ingenious #12;TheCollegeof Engineering We are committed to innovation in all aspects of engineering education and research. We deliver an accredited professional education program that effectively prepares our students to become engineering

  14. Pathway engineering to improve ethanol production by thermophilic bacteria

    SciTech Connect (OSTI)

    Lynd, L.R.

    1998-12-31T23:59:59.000Z

    Continuation of a research project jointly funded by the NSF and DOE is proposed. The primary project goal is to develop and characterize strains of C. thermocellum and C. thermosaccharolyticum having ethanol selectivity similar to more convenient ethanol-producing organisms. An additional goal is to document the maximum concentration of ethanol that can be produced by thermophiles. These goals build on results from the previous project, including development of most of the genetic tools required for pathway engineering in the target organisms. As well, we demonstrated that the tolerance of C. thermosaccharolyticum to added ethanol is sufficiently high to allow practical utilization should similar tolerance to produced ethanol be demonstrated, and that inhibition by neutralizing agents may explain the limited concentrations of ethanol produced in studies to date. Task 1 involves optimization of electrotransformation, using either modified conditions or alternative plasmids to improve upon the low but reproducible transformation, frequencies we have obtained thus far.

  15. Biodegradable microfluidic scaffolds for vascular tissue engineering

    E-Print Network [OSTI]

    Bettinger, Christopher John, 1981-

    2004-01-01T23:59:59.000Z

    This work describes the integration of novel microfabrication techniques for vascular tissue engineering applications in the context of a novel biodegradable elastomer. The field of tissue engineering and organ regeneration ...

  16. Genetically engineered pesticide biodegradation by Gliocladium virens 

    E-Print Network [OSTI]

    Supak, Janet Marie

    1990-01-01T23:59:59.000Z

    -Mw (pennwalt, methyl parathion 25% active ingredient) is 6 pints per acre which translates as 1. 5 pounds of methyl parathion per acre. Provided there is total and even distribution of this pesticide in the top 3 inches of soil, a concentration of 1. 5 ppm...

  17. Genetically engineered pesticide biodegradation by Gliocladium virens

    E-Print Network [OSTI]

    Supak, Janet Marie

    1990-01-01T23:59:59.000Z

    There is an increased awareness of the potential for hazardous chemicals contaminating food, water, air, and soil. Some of Lhese pollutants are agricultural pesticides. Pesc. icides are potential hazards when they are introduced into the environment in high... that cannot naturally degrade chis environmental pollutant. Preparatory steps for fungal transformation included determining the sensitivity of Gliocladium vireos to target pesticides and de. termining the ability of the fungus to naturally degrade...

  18. College of Engineering ENGINEERING

    E-Print Network [OSTI]

    Mayfield, John

    and Treatment 10 Advancing Production in Large-Scale Industries 12 A New Kind of Solar Cell 14 News Bites #12College of Engineering CYCLONE ENGINEERING RESEARCH `SENSING SKIN' MAKES WIND ENERGY MORE COST. CONTENTS4 A Smarter Power Grid 6 Reducing the Cost of Wind Energy 8 Revolutionizing Disease Prevention

  19. Terry Fuller Engineering

    E-Print Network [OSTI]

    Gelfond, Michael

    Terry Fuller Petroleum Engineering Research Building Terry Fuller Petroleum Engineering Research Building Construction Engineering and Engineering Technology Construction Engineering and Engineering Technology Industrial Engineering Industrial Engineering Engineering Center Engineering Center Computer

  20. Mechanical engineering COLLEGE of ENGINEERING

    E-Print Network [OSTI]

    Berdichevsky, Victor

    . Mechanical engineering is a broad, versatile and creative discipline concerned with conversion of energyMechanical engineering COLLEGE of ENGINEERING DepartmentofMechanicalEngineering CollegeofEngineering t Home to nation's first electric-drive vehicle engineering program and alternative energy technology

  1. What engineering courses are there? Automotive Engineering

    E-Print Network [OSTI]

    Sussex, University of

    Electrical and Electronic Engineering Electronic Engineering Mechanical Engineering BEng Automotive Engineering Computer Engineering Electrical and Electronic Engineering Electronic Engineering Mechanical's student perspective `I chose to study Electrical and Electronic Engineering at Sussex because

  2. College of Engineering and Science ENGINEERING

    E-Print Network [OSTI]

    Stuart, Steven J.

    College of Engineering and Science COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering and Science offers advanced degrees in Automotive Engineering, Bioengineering, Biosystems Engineering, Chemi- cal Engineering, Chemistry, Civil Engineering, Computer Engineering, Computer Science, Digital

  3. College of Engineering and Science ENGINEERING

    E-Print Network [OSTI]

    Stuart, Steven J.

    58 College of Engineering and Science 58 COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering and Science offers advanced degrees in Automotive Engineering, Bioengineering, Biosystems Engineering, Chemi- cal Engineering, Chemistry, Civil Engineering, Computer Engineering, Computer Science

  4. College of Engineering and Science ENGINEERING

    E-Print Network [OSTI]

    Stuart, Steven J.

    35 College of Engineering and Science COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering and Science offers advanced degrees in Automotive Engineering, Bioengineering, Biosystems Engineering, Chemi- cal Engineering, Chemistry, Civil Engineering, Computer Engineering, Computer Science, Digital

  5. Mechanical and Manufacturing Engineering Petroleum Engineering Minor

    E-Print Network [OSTI]

    Calgary, University of

    of Chemical and Petroleum Engineering for their petroleum engineering minor. As well, mechanical engineeringMechanical and Manufacturing Engineering Petroleum Engineering Minor The Department of Mechanical and Manufacturing Engineering offers a minor in petroleum engineering within the mechanical engineering major

  6. Vice President, Engineering and Technical Services

    Broader source: Energy.gov [DOE]

    The Engineering and Technical Services organization is responsible for implementing the transmission capital program, providing technical support for the transmission maintenance program and...

  7. Organic solvent topical report

    SciTech Connect (OSTI)

    Cowley, W.L.

    1998-04-30T23:59:59.000Z

    This report is the technical basis for the accident and consequence analyses used in the Hanford Tank Farms Basis for Interim Operation. The report also contains the scientific and engineering information and reference material needed to understand the organic solvent safety issue. This report includes comments received from the Chemical Reactions Subcommittee of the Tank Advisory Panel.

  8. 96 Journal of Student Research in Environmental Science at Appalachian Genetically Modified Maize (Bt corn) and

    E-Print Network [OSTI]

    Thaxton, Christopher S.

    to produce their own pesticides or insecticides. The engineering of genetically modified food is a rel96 Journal of Student Research in Environmental Science at Appalachian Genetically Modified Maize the short-term effects of genetically modified (GM) maize, specifically MON810 and MON863, on laboratory

  9. Introduction Engineering

    E-Print Network [OSTI]

    Banbara, Mutsunori

    Environmental Engineering A study to create a social living space rich in amenity, convenience, and harmony with environment. Civil Engineering Engineering of Human Safety Engineering of Environmental Symbiosis A study34 Introduction Guide Entrance Life Career Inquiries Engineering Graduate School/ Faculty

  10. Terry Fuller Engineering

    E-Print Network [OSTI]

    Gelfond, Michael

    Terry Fuller Petroleum Engineering Research Building Terry Fuller Petroleum Engineering Research Marsha Sharp Center for Student Athletics Construction Engineering and Engineering Technology Construction Engineering and Engineering Technology Industrial Engineering Industrial Engineering Engineering

  11. college of engineering Undergraduate

    E-Print Network [OSTI]

    and computer engineering » environmental engineering » industrial engineering » Manufacturing engineering » electrical and computer engineering » engineering Management* » environmental engineering » industrial engineering (ce) and construction engineering management (ceM). industry placement for ceM graduates regularly

  12. Teaching Organic Farming and Gardening: Resources for Instructors, 3rd Edition. Part 1 - Skills and Practices

    E-Print Network [OSTI]

    2015-01-01T23:59:59.000Z

    industrial-scale conventional systems that rely on fossil fuel-based fertilizers, pesticides, and heavy tillage and look to genetic engineering

  13. ENGINEERING UNDERGRADUATE

    E-Print Network [OSTI]

    Walter, M.Todd

    ENGINEERING UNDERGRADUATE HANDBOOK Fall 2013 #12;Name: ____________________________________________________ E-mail: ____________________________________________________ College of Engineering Cornell University ABET Accredited Programs for 2013­14 ABET (Accreditation Board for Engineering and Technology

  14. Engineering Why engineering at Sussex?

    E-Print Network [OSTI]

    Sussex, University of

    (Hons) in Automotive Engineering (with an industrial placement year) BEng (Hons) in Automotive Engineering BEng (Hons) in Automotive Engineering (with an industrial placement year) MEng (Hons) in Computer Engineering MEng (Hons) in Computer Engineering (with an industrial placement year) BEng (Hons) in Computer

  15. Cognitive Engineering Automation and Human

    E-Print Network [OSTI]

    Parasuraman, Raja

    · Home automation · Robotics · Unmanned vehicles (UAVs and UGVs) · Drug design/Molecular geneticsCognitive Engineering PSYC 530 Automation and Human Performance Raja Parasuraman #12;Overview Automation-Related Accidents Levels and Stages of Automation Information Acquisition and Analysis Decision

  16. The Engineering Meetings Board has approved this paper for publication. It has successfully completed SAE's peer review process under the supervision of the session organizer. This process requires a minimum of three (3) reviews by industry experts.

    E-Print Network [OSTI]

    Wu, Mingshen

    through the use of engine optimization, aftertreatment system integration, and ultra-low sulfur diesel

  17. Faculty of Engineering & Design Civil Engineering

    E-Print Network [OSTI]

    Burton, Geoffrey R.

    the requirements of engineers in an aeronautical field. Technical knowledge from university gave me a goodFaculty of Engineering & Design Civil Engineering Chemical Engineering Electronic & Electrical Engineering Integrated Mechanical & Electrical Engineering Mechanical Engineering Industrial Placements #12

  18. Chief Engineer

    Broader source: Energy.gov [DOE]

    A successful candidate in this position will provide engineering expertise and guidance to multidiscipline engineering and scientific elements throughout the Office of River Protection and is a...

  19. Summer School Chemical Engineering

    E-Print Network [OSTI]

    Duchowski, Andrew T.

    operations: Thermal process engineering distillation / rectification absorption extraction column design phase in columns variation of process conditions (stirrer speed, feed rates of organic and aqueous by oxygen from air modelling of mass transfer in packed bed columns variation of process conditions #12

  20. USC Viterbi School of Engineering

    E-Print Network [OSTI]

    Southern California, University of

    ); Chemical Engineering (Nanotechnology); Chemical Engineering (Petroleum Engineer- ing); Chemical Engineering (Biochemical Engineering); Biomedical (Electrical Engineer- ing); Biomedical (Mechanical Engineering); Chemical Engineering; Chemical Engineer- ing (Biochemical Engineering); Chemical Engineering (Environmental Engineering

  1. FACULTY OF ENGINEERING Engineering

    E-Print Network [OSTI]

    Barthelat, Francois

    and research to mitigate climate change. Star scientists Another interesting feature of the new facility is its and research facility on the fifth floor of the Macdonald Engineering Building is significantly advancing our practical applications inspired by recent advances in nanotechnology, molecular biology and green chemistry

  2. Civil Engineering Environmental Engineering

    E-Print Network [OSTI]

    Anderson, Jim

    ) : Southampton University #12;5 Canada Wharf Station, London Underground · An underground chamber in clay- building · Communication #12;12 THE CONSTRCUTIONARIUM First Year Student Field Class The students design. Renovation of old canals and tunnels Design of new storage reservoirs #12;17 Civil Engineering

  3. Genetic Approaches to Study Tissue Morphogenesis in Drosophila

    E-Print Network [OSTI]

    Zhang, Liang

    2009-12-03T23:59:59.000Z

    controlled during development. I have used both genetic and cell biological approaches to study control mechanisms of morphogenesis in the model organism Drosophila melanogaster. Nonmuscle myosin II (myosin hereafter) has well-established roles in generating...

  4. Nanoparticle Emissions from Internal Combustion Engines

    E-Print Network [OSTI]

    Minnesota, University of

    Meeting Ultra Fine Particles in the Atmosphere 15 March 2000 Engine Exhaust Particle Emissions: Some, low S fuel 1988 engine low S fuel 1979 Roadway study The new engine increased number emissions 10 of highly agglomerated solid carbonaceous material and ash and volatile organic and sulfur compounds

  5. ENVIRONMENTAL ENGINEERING

    E-Print Network [OSTI]

    Walter, M.Todd

    knowledge in environmental engineering; · Share cutting edge research and new information and ideas throughENVIRONMENTAL ENGINEERING UNDERGRADUATE HANDBOOK Cornell University Department of Biological and Environmental Engineering School of Civil and Environmental Engineering enve.cornell.edu 2013-2014 #12

  6. Biomedical Engineering

    E-Print Network [OSTI]

    engineering is a discipline that advances knowledge in engineering, biology and medicine, and improves human#12;Biomedical Engineering Dr. Kevin Lear, Director, Undergraduate Program Ms. Brett Eppich Beal, Adviser 5280 CSU Engineering Showcase January 29, 2011 #12;SBME ­ Who are We? Director ­ Stuart Tobet

  7. ENVIRONMENTAL ENGINEERING

    E-Print Network [OSTI]

    ENVIRONMENTAL ENGINEERING www.cee.pdx.edu What do environmental engineers do? Civil and Environmental Engineering (CEE) is an exciting, challenging, and dynamic field that is critical to our quality of life. Environmental engineers help manage and protect natural resources like water supplies as well

  8. Shockwave Engine: Wave Disk Engine

    SciTech Connect (OSTI)

    None

    2010-01-14T23:59:59.000Z

    Broad Funding Opportunity Announcement Project: MSU is developing a new engine for use in hybrid automobiles that could significantly reduce fuel waste and improve engine efficiency. In a traditional internal combustion engine, air and fuel are ignited, creating high-temperature and high-pressure gases which expand rapidly. This expansion of gases forces the engine’s pistons to pump and powers the car. MSU’s engine has no pistons. It uses the combustion of air and fuel to build up pressure within the engine, generating a shockwave that blasts hot gas exhaust into the blades of the engine’s rotors causing them to turn, which generates electricity. MSU’s redesigned engine would be the size of a cooking pot and contain fewer moving parts—reducing the weight of the engine by 30%. It would also enable a vehicle that could use 60% of its fuel for propulsion.

  9. FACULTYOF ENGINEERING GRADUATE SCHOOLOFENGINEERING

    E-Print Network [OSTI]

    Banbara, Mutsunori

    ENGINEERING ELECTRICAL AND ELECTRONIC ENGINEERING MECHANICAL ENGINEERING CHEMICAL SCIENCE AND ENGINEERING of Architecture and Civil Engineering, Department of Electric and Electronic Engineering, Department of Mechanical six departments: Architecture, Civil Engineering, Electrical and Electronic Engineering, Mechanical

  10. Engineering Instutute Seminar Series

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Engineering Institute Engineering Instutute Seminar Series Engineering Instutute Seminar Series Calendar Contact Professional Staff Assistant Jutta Kayser Engineering Institute...

  11. Faculty of Engineering Aerospace Engineering

    E-Print Network [OSTI]

    Faculty of Engineering Aerospace Engineering Canada's aerospace industry is one of the largest. One of the key factors that will continue this success is a steady stream of engineering talent.uwindsor.ca/mame Rigorous, Enriching Programs Our new Aerospace Engineering program at Windsor is an optional stream within

  12. College of Engineering EGR Engineering

    E-Print Network [OSTI]

    MacAdam, Keith

    College of Engineering EGR Engineering KEY: # = new course * = course changed = course dropped University of Kentucky 2013-2014 Undergraduate Bulletin 1 EGR 101 INTRODUCTION TO ENGINEERING. (4) This course introduces the engineering profession and the skills and expectations required for success

  13. Host Genetic Control of the Microbiome in Humans and Maise or Relating Host Genetic Variation to the Microbiome (2011 JGI User Meeting)

    ScienceCinema (OSTI)

    Ley, Ruth [Cornell University

    2011-06-03T23:59:59.000Z

    The U.S. Department of Energy Joint Genome Institute (JGI) invited scientists interested in the application of genomics to bioenergy and environmental issues, as well as all current and prospective users and collaborators, to attend the annual DOE JGI Genomics of Energy & Environment Meeting held March 22-24, 2011 in Walnut Creek, Calif. The emphasis of this meeting was on the genomics of renewable energy strategies, carbon cycling, environmental gene discovery, and engineering of fuel-producing organisms. The meeting features presentations by leading scientists advancing these topics. Ruth Ley of Cornell University gives a presentation on "Relating Host Genetic Variation to the Microbiome" at the 6th annual Genomics of Energy & Environment Meeting on March 23, 2011.

  14. Host Genetic Control of the Microbiome in Humans and Maise or Relating Host Genetic Variation to the Microbiome (2011 JGI User Meeting)

    SciTech Connect (OSTI)

    Ley, Ruth [Cornell University] [Cornell University

    2011-03-23T23:59:59.000Z

    The U.S. Department of Energy Joint Genome Institute (JGI) invited scientists interested in the application of genomics to bioenergy and environmental issues, as well as all current and prospective users and collaborators, to attend the annual DOE JGI Genomics of Energy & Environment Meeting held March 22-24, 2011 in Walnut Creek, Calif. The emphasis of this meeting was on the genomics of renewable energy strategies, carbon cycling, environmental gene discovery, and engineering of fuel-producing organisms. The meeting features presentations by leading scientists advancing these topics. Ruth Ley of Cornell University gives a presentation on "Relating Host Genetic Variation to the Microbiome" at the 6th annual Genomics of Energy & Environment Meeting on March 23, 2011.

  15. BIOMEDICAL ENGINEERING CHEMICAL AND BIOLOGICAL ENGINEERING

    E-Print Network [OSTI]

    Heller, Barbara

    BIOMEDICAL ENGINEERING CHEMICAL AND BIOLOGICAL ENGINEERING CIVIL, ARCHITECTURAL, AND ENVIRONMENTAL ENGINEERING ELECTRICAL AND COMPUTER ENGINEERING MECHANICAL, MATERIALS, AND AEROSPACE ENGINEERING COLLEGE OF ENGINEERING IIT ARMOUR #12;WHY ENGINEERINGAT IIT ARMOUR? Five Departments. One Distinctive Educational

  16. SCHOOL OF ENGINEERING TECHNOLOGY Surveying Engineering

    E-Print Network [OSTI]

    Thomas, Andrew

    SCHOOL OF ENGINEERING TECHNOLOGY Surveying Engineering Technology practice FOCUSED WHY SURVEYING ENGINEERING TECHNOLOGY? Surveying engineering technology is a practice- focused program that provides students ENGINEERING TECHNOLOGY DEGREE? A graduate with a surveying engineering technology degree can work as a party

  17. College of Engineering MNG Mining Engineering

    E-Print Network [OSTI]

    MacAdam, Keith

    (Concurrent), PHY 232, engineering standing. MNG 302 MINERALS PROCESSING LABORATORY. (1) ApplicationCollege of Engineering MNG Mining Engineering KEY: # = new course * = course changed = course ENGINEERING. (1) Orientationtotheminingengineeringprofession

  18. Addressing Genetics Delivering Health

    E-Print Network [OSTI]

    Rambaut, Andrew

    Addressing Genetics Delivering Health A strategy for advancing the dissemination and application of genetics knowledge throughout our health professions Funded by Hilary Burton September 2003 Executive education of health workers q providing strategic overview of education programme q collaborating

  19. Research and engineering assessment of biological solubilization of phosphate

    SciTech Connect (OSTI)

    Rogers, R.D.; McIlwain, M.E.; Losinski, S.J.; Taylor, D.D.

    1993-03-01T23:59:59.000Z

    This research and engineering assessment examined a microbial phosphate solubilization process as a method of recovering phosphate from phosphorus containing ore compared to the existing wet acid and electric arc methods. A total of 860 microbial isolates, collected from a range of natural environments were tested for their ability to solubilize phosphate from rock phosphate. A bacterium (Pseudomonas cepacia) was selected for extensive characterization and evaluation of the mechanism of phosphate solubilization and of process engineering parameters necessary to recover phosphate from rock phosphate. These studies found that concentration of hydrogen ion and production of organic acids arising from oxidation of the carbon source facilitated microbial solubilization of both pure chemical insoluble phosphate compounds and phosphate rock. Genetic studies found that phosphate solubilization was linked to an enzyme system (glucose dehydrogenase). Process-related studies found that a critical solids density of 1% by weight (ore to liquid) was necessary for optimal solubilization. An engineering analysis evaluated the cost and energy requirements for a 2 million ton per year sized plant, whose size was selected to be comparable to existing wet acid plants.

  20. Electrical Engineering SB Rev. Nov 2013 1/3

    E-Print Network [OSTI]

    Electrical Engineering SB Rev. Nov 2013 1/3 Plan of Study for the Electrical Engineering of Study Form is for a (Circle One): DECLARATION REVISION The S.B. Program in Electrical Engineering must ­ System Programming & Machine Organization 1.00 __________ #12;Electrical Engineering SB Rev. Nov 2013

  1. Electrical Engineering SB Rev. Nov 2014 1/3

    E-Print Network [OSTI]

    Electrical Engineering SB Rev. Nov 2014 1/3 Plan of Study for the Electrical Engineering of Study Form is for a (Circle One): DECLARATION REVISION The S.B. Program in Electrical Engineering must ­ System Programming & Machine Organization 1.00 __________ Sophomore Forum #12;Electrical Engineering SB

  2. 112 COLLEGE OF ENGINEERING AND ENGINEERING TECHNOLOGY College of Engineering and Engineering

    E-Print Network [OSTI]

    Kostic, Milivoje M.

    112 COLLEGE OF ENGINEERING AND ENGINEERING TECHNOLOGY College of Engineering and Engineering requirements in interdisciplinary studies, engineering majors need only one interdisciplinary studies course of Engineering and Engineering Technology offer baccalaureate programs leading to the degree Bachelor of Science

  3. Value Engineering

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2002-12-30T23:59:59.000Z

    To establish Department of Energy (DOE) value engineering policy that establishs and maintains cost-effective value procedures and processes.

  4. Source: "Careers for Electrical Engineers and Computer Scientists" Institute of Electrical and Electronics Engineers HISTORICAL OVERVIEW

    E-Print Network [OSTI]

    New Hampshire, University of

    Source: "Careers for Electrical Engineers and Computer Scientists" © Institute of Electrical and Electronics Engineers HISTORICAL OVERVIEW PREPARED BY THE IEEE HISTORY CENTER RUTGERS UNIVERSITY ELECTRICITY IN THE 1880s The organization of the electrical engineering profession in America in the1880s

  5. artificial sensory organ: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Artificial Visual Sensorimotor Structures Engineering Websites Summary: in supporting perception by orienting and relocating the visual sensory organs. Motor and sensory...

  6. ENGINEERING INTERNATIONAL

    E-Print Network [OSTI]

    University of Technology, Sydney

    COURSE GUIDE 2013 UTS: ENGINEERING INTERNATIONAL UNDERGRADUATE w w w.eng.uts.edu.au #12;2 / ENGINEERING IN AUSTRALIA Internationally, Australian universities have a reputation for high quality research developed close links with many international institutions, particularly in Asia. ENGINEERING IN SYDNEY

  7. University , Engineering

    E-Print Network [OSTI]

    Zakharov, Leonid E.

    , Princeton Plasma Physics Laboratory Presented at Seminar of Department of Nuclear Engineering Massachusetts{AC020{76{CHO{3073. Leonid E. Zakharov, Department of Nuclear Engineering, MIT , Feb.26, 2001, Cambridge acting on the guide wall. This design concept opens opportunities for nuclear engineers and technologists

  8. Method of mechanism synthesis by hybrid genetic algorithm

    E-Print Network [OSTI]

    O'Neil, Robert Anthony

    1999-01-01T23:59:59.000Z

    METHOD OF MECHANISM SYNTHESIS BY HYBRID GENETIC ALGORITHM A Thesis by ROBERT ANTHONY O' NEIL Jr. Submitted to the Office of Graduate Studies of Texas A8 M University in the partial fulfillment of the requirements for the degree of MASTER... OF SCIENCE December 1999 Major Subject: Mechanical Engineering Method of Mechanism Synthesis by Hybrid Genetic Algorithm A Thesis by ROBERT ANTHONY O' NEIL Jr. Submitted to Texas A8 M University in partial fulfillment of the requirements...

  9. FACULTY OF ENGINEERING FALL Engineering

    E-Print Network [OSTI]

    Barthelat, Francois

    -Engineering Scholar Mathieu Brochu uses the Spark Plasma Sintering Press in his lab to research improved methods

  10. College of Engineering College of Engineering

    E-Print Network [OSTI]

    Collett Jr., Jeffrey L.

    of the undergraduate engineering programs will be able to: · Apply knowledge of mathematics, science, and engineeringCollege of Engineering College of Engineering Office in Engineering Building, Room 202 (970) 491 UNDERGRADUATE MAJORS Biomedical Engineering Chemical and Biological Engineering Civil Engineering Computer

  11. Commercialization of Novel Organic Solar Cells

    E-Print Network [OSTI]

    Kassegne, Samuel Kinde

    Commercialization of Novel Organic Solar Cells Master of Engineering Final Report Shanel C. Miller................................................................................................................... 12 2.1 How do Solar Cells Work?.................................................................................................. 12 2.2 Types of Solar Cells that Exist Today

  12. Chemical and Petroleum Engineering Petroleum Engineering Minor

    E-Print Network [OSTI]

    Calgary, University of

    electives in Petroleum Reservoir Engineering and Petroleum Production Engineering Chemical and Petroleum Engineering Petroleum Engineering Minor Students their skills by taking a minor in petroleum engineering. Energy is the largest

  13. College of Engineering ME Mechanical Engineering

    E-Print Network [OSTI]

    MacAdam, Keith

    College of Engineering ME Mechanical Engineering KEY: # = new course * = course changed = course ENGINEERING. (3) This course introduces the Mechanical Engineering profession including the skills and expectations required for success. Engineering applications of calculus are also presented. Prereq or concur

  14. Whitacre College of Engineering Industrial Engineering Department

    E-Print Network [OSTI]

    Gelfond, Michael

    Whitacre College of Engineering Industrial Engineering Department Department Chair and Professor of Industrial Engineering. The Industrial Engineering Department at Texas Tech University has a distinguished industrial engineering education and provide appropriate service to the department, university

  15. civil engineering College of Engineering and Mines

    E-Print Network [OSTI]

    Hartman, Chris

    civil engineering College of Engineering and Mines Department of Civil and Environmental's degree program can include courses in environmental engineering, engineering management and other areas. An advanced degree in environmental engineering administered within the civil en- gineering department

  16. King Fahd University of Petroleum & Minerals Collage of Electrical Engineering

    E-Print Network [OSTI]

    Al-Ghadhban, Samir

    King Fahd University of Petroleum & Minerals Collage of Electrical Engineering Summer Training King Fahd university of Petroleum and Minerals OMVG Gambia River Basin Development Organization PLCs

  17. Livermore scientist, engineers train to be inspectors for test...

    National Nuclear Security Administration (NNSA)

    scientist, engineers train to be inspectors for test ban treaty organization | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing...

  18. Structural control Architecture Optimization for 3-D Systems Using Advanced Multi-Objective Genetic Algorithms

    E-Print Network [OSTI]

    Cha, Young Jin

    2010-01-14T23:59:59.000Z

    Gaussian (LQG) control algorithm is used as the active control strategy. The American Society of Civil Engineers (ASCE) control benchmark building definition is used to develop the building system model. The proposed gene manipulation genetic algorithm...

  19. *Corresponding Author email: sourabh.k.saha@gmail.com Genetic algorithm based optimization and post

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    *Corresponding Author email: sourabh.k.saha@gmail.com Genetic algorithm based optimization and post optimality analysis of multi-pass face milling Sourabh K. Saha* Department of Mechanical Engineering IIT

  20. college of engineering Undergraduate

    E-Print Network [OSTI]

    Tullos, Desiree

    . Civil & Construction Engineering Dedicated to advancing knowledge in the built environment to bettercollege of engineering FACT SHEET Undergraduate » Bioengineering » chemical engineering » civil engineering » computer Science » construction engineering Management » ecological engineering » electrical

  1. Sources and Formation of OrganicSources and Formation of Organic Aerosols in our AtmosphereAerosols in our Atmosphere

    E-Print Network [OSTI]

    Einat, Aharonov

    Sources and Formation of OrganicSources and Formation of Organic Aerosols in our AtmosphereAerosols Department of Chemical Engineering University of Patras, Greece #12;Sources of Organic AerosolSources of Organic Aerosol Primary Secondary Anthropogenic ·Gasoline ·Diesel ·Biomass burning ·Meat Cooking Biogenic

  2. Advanced Natural Gas Reciprocating Engine(s)

    SciTech Connect (OSTI)

    Kwok, Doris; Boucher, Cheryl

    2009-09-30T23:59:59.000Z

    Energy independence and fuel savings are hallmarks of the nation’s energy strategy. The advancement of natural gas reciprocating engine power generation technology is critical to the nation’s future. A new engine platform that meets the efficiency, emissions, fuel flexibility, cost and reliability/maintainability targets will enable American manufacturers to have highly competitive products that provide substantial environmental and economic benefits in the US and in international markets. Along with Cummins and Waukesha, Caterpillar participated in a multiyear cooperative agreement with the Department of Energy to create a 50% efficiency natural gas powered reciprocating engine system with a 95% reduction in NOx emissions by the year 2013. This platform developed under this agreement will be a significant contributor to the US energy strategy and will enable gas engine technology to remain a highly competitive choice, meeting customer cost of electricity targets, and regulatory environmental standard. Engine development under the Advanced Reciprocating Engine System (ARES) program was divided into phases, with the ultimate goal being approached in a series of incremental steps. This incremental approach would promote the commercialization of ARES technologies as soon as they emerged from development and would provide a technical and commercial foundation of later-developing technologies. Demonstrations of the Phase I and Phase II technology were completed in 2004 and 2008, respectively. Program tasks in Phase III included component and system development and testing from 2009-2012. Two advanced ignition technology evaluations were investigated under the ARES program: laser ignition and distributed ignition (DIGN). In collaboration with Colorado State University (CSU), a laser ignition system was developed to provide ignition at lean burn and high boost conditions. Much work has been performed in Caterpillar’s DIGN program under the ARES program. This work has consisted of both modeling and single cylinder engine experiments to quantify DIGN performance. The air handling systems of natural gas engines dissipate a percentage of available energy as a result of both flow losses and turbomachinery inefficiencies. An analytical study was initiated to increase compressor efficiency by employing a 2-stage inter-cooled compressor. Caterpillar also studied a turbo-compound system that employs a power turbine to recover energy from the exhaust gases for improved engine efficiency. Several other component and system investigations were undertaken during the final phase of the program to reach the ultimate ARES goals. An intake valve actuation system was developed and tested to improve engine efficiency, durability and load acceptance. Analytical modeling and materials testing were performed to evaluate the performance of steel pistons and compacted graphite iron cylinder head. Effort was made to improve the detonation sensing system by studying and comparing the performance of different pressure sensors. To reduce unburned hydrocarbon emissions, different camshafts were designed and built to investigate the effect of exhaust valve opening timing and value overlap. 1-D & 3-D coupled simulation was used to study intake and exhaust manifold dynamics with the goal of reducing load in-balance between cylinders. Selective catalytic reduction with on-board reductant generation to reduce NOx emissions was also engine tested. An effective mean to successfully deploy ARES technologies into the energy markets is to deploy demonstration projects in the field. In 2010, NETL and Caterpillar agreed to include a new “opportunity fuel” deliverable and two field demonstrations in the ARES program. An Organic Rankine Cycle system was designed with production intent incorporating lessons learned from the Phase II demonstration. Unfortunately, business conditions caused Caterpillar to cancel this demonstration in 2011. Nonetheless, Caterpillar partnered with a local dealer to deploy an ARES class engine using syngas from a biomass gasifier as

  3. electrical, engineering

    E-Print Network [OSTI]

    Zhang, Junshan

    and energy engineering biofuels waste conversion to energy public health-technology-environment interactions and colleagues worldwide. Contributing writers Joe Kullman Natalie Pierce Photography Jessica Slater © 2012

  4. Petroleum Engineer

    Broader source: Energy.gov [DOE]

    This position is established to provide an expert analyst and technical authority in petroleum engineering to originate, perform, and review new and continuing data acquisition and analysis,...

  5. ISEIndustrial Engineering

    E-Print Network [OSTI]

    Wang, Hai

    planning, software, and data mining techniques. USC's undergraduate ISE curricula pre- pare students and industrial ecology Transportation and logistics Optimization and logistics Collaborative engineering design

  6. Electronics Engineer

    Broader source: Energy.gov [DOE]

    (See Frequently Asked Questions for more information). Where would I be working? Western Area Power Administration Sierra Nevada Region Information Technology Engineering Systems N2200 114...

  7. EEElectrical Engineering

    E-Print Network [OSTI]

    Wang, Hai

    , computer engineering, circuits and devices, and energy systems and lasers. As fresh- men and sophomores & sensor networks Biological interface circuits and devices Laser interactions with materials Speech

  8. College of Engineering Profile The College of Engineering at Colorado

    E-Print Network [OSTI]

    Programs: Chemical and Biological Engineering Civil Engineering Computer Engineering Electrical Engineering: Atmospheric Science Bioengineering Chemical Engineering Civil Engineering Electrical Engineering MechanicalCollege of Engineering Profile 2007-2008 The College of Engineering at Colorado State has a strong

  9. College of Engineering and Science ENGINEERING

    E-Print Network [OSTI]

    Stuart, Steven J.

    . The Automotive Engineering programs equip students with the basis, depth and domain knowledge needed for master35 College of Engineering and Science COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering and Science offers advanced degrees in Automotive Engineering, Bio- engineering, Biosystems Engineering

  10. College of Engineering and Science ENGINEERING

    E-Print Network [OSTI]

    Stuart, Steven J.

    . The Automotive Engineering programs equip students with the basis, depth and domain knowledge needed for masterCollege of Engineering and Science COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering and Science offers advanced degrees in Automotive Engineering, Bio- engineering, Biosystems Engineering

  11. Master of Engineering (ME), Major: Chemical Engineering

    E-Print Network [OSTI]

    Shihadeh, Alan

    Master of Engineering (ME), Major: Chemical Engineering Apply Now The Chemical Engineering Program to the following degrees: Master of Engineering, major Chemical Engineering The ME program will be open to students with a Bachelor of Engineering (BE) in Chemical Engineering, or other related disciplines

  12. The John M. Rezendes Ethics Essay Competition GOLDEN RICE: A GENETICALLY MODIFIED SOLUTION TO

    E-Print Network [OSTI]

    Thomas, Andrew

    The John M. Rezendes Ethics Essay Competition GOLDEN RICE: A GENETICALLY MODIFIED SOLUTION, such as beta-carotene (pro-vitamin A), which makes this predominant food source the main cause for vitamin Humanitarian Board, 2005-2011), a biofortified rice that was only possible through genetic engineering

  13. The 50th Annual Maize Genetics Conference

    SciTech Connect (OSTI)

    Cone, Karen

    2014-03-26T23:59:59.000Z

    The 50th Annual Maize Genetics Conference was held February 27 - March 2, 2008 at the Marriott Wardman Park Hotel in Washington, D.C. As the golden anniversary of the Conference and coinciding with the release of a draft of the maize genome sequence, this was a special meeting. To publicize this unique occasion, meeting organizers hosted a press conference, which was attended by members of the press representing science and non-science publications, and an evening reception at the Smithsonian National Museum of Natural History, where the draft sequence was announced and awards were presented to Dr. Mary Clutter and Senator Kit Bond to thank them for their outstanding contributions to maize genetics and genomics research. As usual, the Conference provided an invigorating forum for exchange of recent research results in many areas of maize genetics, e.g., cytogenetics, development, molecular genetics, transposable element biology, biochemical genetics, and genomics. Results were shared via both oral and poster presentations. Invited talks were given by four distinguished geneticists: Vicki Chandler, University of Arizona; John Doebley, University of Wisconsin; Susan Wessler, University of Georgia; and Richard Wilson, Washington University. There were 46 short talks and 241 poster presentations. The Conference was attended by over 500 participants. This included a large number of first-time participants in the meeting and an increasingly visible presence by individuals from underrepresented groups. Although we do not have concrete counts, there seem to be more African American, African and Hispanic/Latino attendees coming to the meeting than in years past. In addition, this meeting attracted many participants from outside the U.S. Student participation continues to be hallmark of the spirit of free exchange and cooperation characteristic of the maize genetics community. With the generous support provided by DOE, USDA NSF, and corporate/private donors, organizers were able to defray lodging and meal costs for 133 graduate and undergraduate students and 66 postdocs

  14. A unified theory of engineering design

    E-Print Network [OSTI]

    Dyas, Scott Patrick

    2007-04-25T23:59:59.000Z

    . [1] 2. Establishing a set of rules is a way to make design more scientific. [2] ___________________ This thesis follows the style of Society of Automotive Engineers. 2 3. Creating a formal method of describing and organizing...

  15. Leadership, Organizations

    E-Print Network [OSTI]

    Palmeri, Thomas

    Leadership, Policy & Organizations #12;2 At Peabody students have the opportunity to develop new College, in the Department of Leadership, Policy and Organizations (LPO). The faculty believes Patricia and Rodes Hart Chair, and Professor of Education Policy and Leadership, Ellen Goldring also serves

  16. EnginEEring ZonE "The Engineering Zone

    E-Print Network [OSTI]

    Tobar, Michael

    EnginEEring ZonE "The Engineering Zone will push the limits in collaborative learning and research, and empower people to change the world. "Winthrop Professor John Dell Dean, Faculty of Engineering, Computing and Mathematics #12;2 | nEw CEntury Campaign ­ EnginEEring ZonE #12;nEw CEntury Campaign ­ EnginEEring ZonE | 3

  17. Species interactions differ in their genetic robustness

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Chubiz, Lon M.; Granger, Brian R.; Segre, Daniel; Harcombe, William R.

    2015-04-14T23:59:59.000Z

    Conflict and cooperation between bacterial species drive the composition and function of microbial communities. Stability of these emergent properties will be influenced by the degree to which species' interactions are robust to genetic perturbations. We use genome-scale metabolic modeling to computationally analyze the impact of genetic changes when Escherichia coli and Salmonella enterica compete, or cooperate. We systematically knocked out in silico each reaction in the metabolic network of E. coli to construct all 2583 mutant stoichiometric models. Then, using a recently developed multi-scale computational framework, we simulated the growth of each mutant E. coli in the presence of S.more »enterica. The type of interaction between species was set by modulating the initial metabolites present in the environment. We found that the community was most robust to genetic perturbations when the organisms were cooperating. Species ratios were more stable in the cooperative community, and community biomass had equal variance in the two contexts. Additionally, the number of mutations that have a substantial effect is lower when the species cooperate than when they are competing. In contrast, when mutations were added to the S. enterica network the system was more robust when the bacteria were competing. These results highlight the utility of connecting metabolic mechanisms and studies of ecological stability. Cooperation and conflict alter the connection between genetic changes and properties that emerge at higher levels of biological organization.« less

  18. Species interactions differ in their genetic robustness

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Chubiz, Lon M. [Univ. of Missouri - St. Louis, St. Louis, MO (United States); Granger, Brian R. [Boston Univ., MA (United States); Segre, Daniel [Boston Univ., MA (United States); Harcombe, William R. [Univ. of Minnesota, St. Paul, MN (United States)

    2015-04-14T23:59:59.000Z

    Conflict and cooperation between bacterial species drive the composition and function of microbial communities. Stability of these emergent properties will be influenced by the degree to which species' interactions are robust to genetic perturbations. We use genome-scale metabolic modeling to computationally analyze the impact of genetic changes when Escherichia coli and Salmonella enterica compete, or cooperate. We systematically knocked out in silico each reaction in the metabolic network of E. coli to construct all 2583 mutant stoichiometric models. Then, using a recently developed multi-scale computational framework, we simulated the growth of each mutant E. coli in the presence of S. enterica. The type of interaction between species was set by modulating the initial metabolites present in the environment. We found that the community was most robust to genetic perturbations when the organisms were cooperating. Species ratios were more stable in the cooperative community, and community biomass had equal variance in the two contexts. Additionally, the number of mutations that have a substantial effect is lower when the species cooperate than when they are competing. In contrast, when mutations were added to the S. enterica network the system was more robust when the bacteria were competing. These results highlight the utility of connecting metabolic mechanisms and studies of ecological stability. Cooperation and conflict alter the connection between genetic changes and properties that emerge at higher levels of biological organization.

  19. Arctic EnginEEring College of Engineering and Mines

    E-Print Network [OSTI]

    Hartman, Chris

    Arctic EnginEEring College of Engineering and Mines Department of Civil and Environmental Engineering Management. See Environmental Engineering and Environmental Quality Science. See Science Engineering 907-474-7241 http://cem.uaf.edu/cee/ MS Degree Minimum Requirements for Degree: 30 credits

  20. Genetic variation and its maintenance

    SciTech Connect (OSTI)

    Roberts, D.F.; De Stefano, G.F.

    1986-01-01T23:59:59.000Z

    This book contains several papers divided among three sections. The section titles are: Genetic Diversity--Its Dimensions; Genetic Diversity--Its Origin and Maintenance; and Genetic Diversity--Applications and Problems of Complex Characters.

  1. The Engineering Meetings Board has approved this paper for publication. It has successfully completed SAE's peer review process under the supervision of the session organizer. This process requires a minimum of three (3) reviews by industry experts.

    E-Print Network [OSTI]

    Stefanopoulou, Anna

    with gasoline- ethanol fuel E85 was also investigate. INTRODUCTION In order to achieve higher fuel economy to simulate the engine performance with ethanol fuels and investigate the effects of variable valve timing

  2. Genetics in the courts

    SciTech Connect (OSTI)

    Coyle, Heather; Drell, Dan

    2000-12-01T23:59:59.000Z

    Various: (1)TriState 2000 Genetics in the Courts (2) Growing impact of the new genetics on the courts (3)Human testing (4) Legal analysis - in re G.C. (5) Legal analysis - GM ''peanots'', and (6) Legal analysis for State vs Miller

  3. Constitution Organization: ASME Date: 5 September, 2014

    E-Print Network [OSTI]

    Firestone, Jeremy

    Constitution Organization: ASME Date: 5 September, 2014 Preamble We, the students at the University of Delaware, do hereby form the organization known as the American Society of Mechanical Engineers for the purpose of the advancement and dissemination of knowledge of the theory and practice of mechanical

  4. MANAGING ENGINEERING ACTIVITIES FOR THE PLATEAU REMEDIATION CONTRACT - HANFORD

    SciTech Connect (OSTI)

    KRONVALL CM

    2011-01-14T23:59:59.000Z

    In 2008, the primary Hanford clean-up contract transitioned to the CH2MHill Plateau Remediation Company (CHPRC). Prior to transition, Engineering resources assigned to remediation/Decontamination and Decommissioning (D&D) activities were a part of a centralized engineering organization and matrixed to the performing projects. Following transition, these resources were reassigned directly to the performing project, with a loose matrix through a smaller Central Engineering (CE) organization. The smaller (10 FTE) central organization has retained responsibility for the overall technical quality of engineering for the CHPRC, but no longer performs staffing and personnel functions. As the organization has matured, there are lessons learned that can be shared with other organizations going through or contemplating performing a similar change. Benefits that have been seen from the CHPRC CE organization structure include the following: (1) Staff are closely aligned with the 'Project/facility' that they are assigned to support; (2) Engineering priorities are managed to be consistent with the 'Project/facility' priorities; (3) Individual Engineering managers are accountable for identifying staffing needs and the filling of staffing positions; (4) Budget priorities are managed within the local organization structure; (5) Rather than being considered a 'functional' organization, engineering is considered a part of a line, direct funded organization; (6) The central engineering organization is able to provide 'overview' activities and maintain independence from the engineering organizations in the field; and (7) The central engineering organization is able to maintain a stable of specialized experts that are able to provide independent reviews of field projects and day-to-day activities.

  5. Biomechanical and Biomedical Engineering Anton Filatov

    E-Print Network [OSTI]

    Science 2. An organism is a living thing that has physical characteristics to help it survive 2nd Grade and biomedical engineering. The students will be exposed the concepts like the strucutre and functions to think of the human body in an engineering context. This activity is aimed at students in the 3rd - 5th

  6. Automated Design of Algorithms and Genetic Improvement: Contrast and Commonalities

    E-Print Network [OSTI]

    Woodward, John

    . Haraldsson University of Stirling Stirling, Scotland, UK soh@cs.stir.ac.uk John R. Woodward University of Stirling Stirling, Scotland, UK jrw@cs.stir.ac.uk Categories and Subject Descriptors I.2.2 [Automatic Based Soft- ware Engineering (SBSE), Genetic Algorithm (GA) 1. INTRODUCTION Recent decades has seen

  7. Biological Engineering Electives Biosystems Engineering

    E-Print Network [OSTI]

    Hill, Jeffrey E.

    Control Theory (3) ECH 4323L Chemical Engineering Lab (1) ECH 4504 Chemical Kinetics & Reactor Design (4) ECH 4524 Heterogeneous Kinetics & Reactor Design (2) EGM 4313 Intermediate Engineering Analysis (4 Principles of Food Processing (4) FOS 4522C Seafood Technology (3) FOS 4722C Quality Control in Foods (3) FOS

  8. College of Engineering EE Electrical Engineering

    E-Print Network [OSTI]

    MacAdam, Keith

    College of Engineering EE Electrical Engineering KEY: # = new course * = course changed = course IN ELECTRICAL AND COMPUTER ENGINEERING. (3,includingtransferfunctions,networkparameters,andadesignprojectinvolvingmoderndesignpractices.Prereq: EE 211. Concur: MA 214. EE 222 ELECTRICAL ENGINEERING LABORATORY I. (2) Laboratory exercises

  9. Engineering Project Management Using The Engineering Cockpit

    E-Print Network [OSTI]

    Engineering Project Management Using The Engineering Cockpit A collaboration platform for project managers and engineers Thomas Moser, Richard Mordinyi, Dietmar Winkler and Stefan Biffl Christian Doppler Laboratory "Software Engineering Integration for Flexible Automation Systems" Vienna University of Technology

  10. Organic Superconductors

    SciTech Connect (OSTI)

    Charles Mielke

    2009-02-27T23:59:59.000Z

    Intense magnetic fields are an essential tool for understanding layered superconductors. Fundamental electronic properties of organic superconductors are revealed in intense (60 tesla) magnetic fields. Properties such as the topology of the Fermi surface and the nature of the superconducting order parameter are revealed. With modest maximum critical temperatures~13K the charge transfer salt organic superconductors prove to be incredibly valuable materials as their electronically clean nature and layered (highly anisotropic) structures yield insights to the high temperature superconductors. Observation of de Haas-van Alphen and Shubnikov-de Haas quantum oscillatory phenomena, magnetic field induced superconductivity and re-entrant superconductivity are some of the physical phenomena observed in the charge transfer organic superconductors. In this talk, I will discuss the nature of organic superconductors and give an overview of the generation of intense magnetic fields; from the 60 tesla millisecond duration to the extreme 1000 tesla microsecond pulsed magnetic fields.

  11. Estimating Systems Engineering Reuse

    E-Print Network [OSTI]

    Fortune, Jared

    2009-04-20T23:59:59.000Z

    Systems engineering reuse is the utilization of previously developed systems engineering products or artifacts such as

  12. Mining engineering College of Engineering and Mines

    E-Print Network [OSTI]

    Hartman, Chris

    Mining engineering College of Engineering and Mines Department of Mining and Geological Engineering As the nation's northernmost accredited mining engineering program, our mission is to advance and disseminate. The mining engineering program emphasizes engineering as it ap- plies to the exploration and development

  13. College of Engineering and Science ENGINEERING AND

    E-Print Network [OSTI]

    Bolding, M. Chad

    to ·apply knowledge of math, science, and engineering · identify, formulate, and solve engineering problems87 College of Engineering and Science COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering educational oppor- tunities. The innovative combination of engineering and science disciplines that comprises

  14. College of Engineering and Science ENGINEERING

    E-Print Network [OSTI]

    Bolding, M. Chad

    . The Automotive Engineering programs equip students with the basis, depth and domain knowledge needed for masterCollege of Engineering and Science COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering and Science offers advanced degrees in Automotive Engineering, Bioengineering, Biosystems Engineering

  15. COLLEGE OF ENGINEERING COLLEGE OF ENGINEERING

    E-Print Network [OSTI]

    of new knowledge that colleges of engineering have the greatest global impact. Sandra Woods Woods joinedEnergy COLLEGE OF ENGINEERING #12;COLLEGE OF ENGINEERING 2 COLLEGE OF ENGINEERING Engineers have Colorado State University in 2001 and has served as dean of the College of Engineering since 2005. She

  16. College of Engineering and Science ENGINEERING AND

    E-Print Network [OSTI]

    Stuart, Steven J.

    of producing engineering graduates who are able to: ·apply knowledge of math, science, and engineering91 College of Engineering and Science COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering educational oppor- tunities. The innovative combination of engineering and science disciplines that comprises

  17. Biology 4250 Evolutionary Genetics

    E-Print Network [OSTI]

    Innes, David J.

    sickle cell anemia (non-synonymous substitution) Unlimited supply of markers Organism Genome size Yeast

  18. A parametric building energy cost optimization tool based on a genetic algorithm

    E-Print Network [OSTI]

    Tan, Xiaowei

    2007-09-17T23:59:59.000Z

    Sheng-Jen Hsieh Donald R. Smith Coordinator, College of Engineering, N. K. Anand May 2006 Major Subject: Engineering iii ABSTRACT A Parametric Building Energy Cost Optimization Tool Based on a Genetic Algorithm. (May 2006) Xiaowei Tan, B.......................................................................................5 III.1. Project Origin.............................................................................................5 III.2. Applicable Models .....................................................................................7 III.3. Input...

  19. MMEECCHHAANNIICCAALL ENGINEERING PROGRAM

    E-Print Network [OSTI]

    Fernandez, Eduardo

    for admission to the Department of Ocean and Mechanical Engineering in the Mechanical Engineering ProgramMMEECCHHAANNIICCAALL ENGINEERING PROGRAM UNDERGRADUATE ADMISSION REQUIREMENTS To be eligible Fundamentals of Engineering* 3 Engineering Graphics* 3 Electives 6 Total: 60 NOTE: Electives may include

  20. COMPUTER ENGINEERING EECS Department

    E-Print Network [OSTI]

    COMPUTER ENGINEERING EECS Department The Electrical Engineering and Computer Science (EECS) Department at WSU offers undergraduate degrees in electrical engineering, computer engineering and computer science. The EECS Department offers Master of Science degrees in computer science, electrical engineering

  1. and Industrial Engineering

    E-Print Network [OSTI]

    Mountziaris, T. J.

    technologicalandlogisticssystemsbygathering, structuring, and managing information. Indus- trial engineers apply their knowledge not only45 Mechanical and Industrial Engineering 220 Engineering Lab Degrees: Bachelor of Science in Mechanical Engineering Bachelor of Science in Industrial Engineering Contact: James R. Rinderle

  2. Electrical and Computer Engineering

    E-Print Network [OSTI]

    Weber, Rodney

    COE 1000 Electrical and Computer Engineering Jennifer Michaels Professor and Interim Associate Chair for Undergraduate Affairs School of Electrical and Computer Engineering Fall 2011 #12;Defining Electrical and Computer Engineering Electrical Engineering: Electrical engineers explore electrical phenomena

  3. ELECTRICAL ENGINEERING EECS Department

    E-Print Network [OSTI]

    ELECTRICAL ENGINEERING EECS Department The Electrical Engineering and Computer Science (EECS) Department at WSU offers undergraduate degrees in electrical engineering, computer engineering and computer science. The EECS Department offers master of science degrees in computer science, electrical engineering

  4. Engineering Guidebook Bioengineering

    E-Print Network [OSTI]

    Chen, Yiling

    Engineering Guidebook 2014-2015 Bioengineering Electrical Environmental Mechanical #12;Harvard SEAS Engineering Guidebook 2 What is engineering? In the simplest terms, engineers provide solutions to the world technologies, to protecting vital ecosystems by controlling pollution. At its core, engineering

  5. Engineering and Applied

    E-Print Network [OSTI]

    Stowell, Michael

    > Computer Science > Electrical, Computer, and Energy Engineering > Mechanical Engineering 11, Computational Science and Engineering, Energy Systems and Environmental Sustainability, Materials ScienceCollege of Engineering and Applied Science Contact Robert H. Davis, Engineering Dean 303

  6. engineering Mathematical

    E-Print Network [OSTI]

    Patriksson, Michael

    thesis for the degree of licentiate of engineering On Some Problems in Systems Biology Biology and Geometric Flows Tobias Geb ack c Tobias Geb ack, 2005 Licentiate Thesis ISSN 1652-9715/No

  7. ENGINEERING & INFORMATION

    E-Print Network [OSTI]

    Viglas, Anastasios

    integrated circuit design, reconfigurable computing, computer architecture, low-power VLsI, neuromorphic networks, software architecture, web engineering, distributed components and middleware, real-time systems, nonlinear fibre optics, optical network security and encryption, optically controlled phased arrays

  8. Harmonic engine

    DOE Patents [OSTI]

    Bennett, Charles L. (Livermore, CA)

    2009-10-20T23:59:59.000Z

    A high efficiency harmonic engine based on a resonantly reciprocating piston expander that extracts work from heat and pressurizes working fluid in a reciprocating piston compressor. The engine preferably includes harmonic oscillator valves capable of oscillating at a resonant frequency for controlling the flow of working fluid into and out of the expander, and also preferably includes a shunt line connecting an expansion chamber of the expander to a buffer chamber of the expander for minimizing pressure variations in the fluidic circuit of the engine. The engine is especially designed to operate with very high temperature input to the expander and very low temperature input to the compressor, to produce very high thermal conversion efficiency.

  9. Molecular engineering with bridged polysilsesquioxanes

    SciTech Connect (OSTI)

    LOY,DOUGLAS A.; SHEA,KENNETH J.

    2000-05-09T23:59:59.000Z

    Bridged polysilsesquioxanes are a class of hybrid organic-inorganic materials that permit molecular engineering of bulk properties including porosity. Prepared by sol-gel polymerization of monomers with two or more trialkoxysilyl groups, the materials are highly cross-linked amorphous polymers that are readily obtained as gels. The bridging configuration of the hydrocarbon group insures that network polymers are readily formed and that the organic functionality is homogeneously distributed throughout the polymeric scaffolding at the molecular level. This permits the bulk properties, including surface area, pore size, and dielectric constant to be engineered through the selection of the bridging organic group. Numerous bridging groups have been incorporated. This presentation will focus on the effects that the length, flexibility, and substitution geometry of the hydrocarbon bridging groups have on the properties of the resulting bridged polysilsesquioxanes. Details of the preparation, characterization, and some structure property relationships of these bridged polysilsesquioxanes will be given.

  10. ENGINEERS' DAY 2011 ACTIVITIES 1800 Engineering Hall, 1415 Engineering Drive

    E-Print Network [OSTI]

    Sheridan, Jennifer

    ENGINEERS' DAY 2011 ACTIVITIES 1800 Engineering Hall, 1415 Engineering Drive 5:30 SOCIAL HOUR · Distinguished Achievement Awards · Early-Career Achievement Award · College of Engineering faculty and staff, Chair, E-Day Committee Department of Biomedical Engineering 8:50 COLLEGE UPDATE Dean Paul S. Peercy

  11. civil EnginEEring College of Engineering and Mines

    E-Print Network [OSTI]

    Hartman, Chris

    civil EnginEEring College of Engineering and Mines Department of Civil and Environmental Engineering 907-474-7241 http://cem.uaf.edu/cee/ McE, MS Degrees Minimum Requirements for Degrees: 30 credits Civil engineers plan, design and supervise the construction of facilities essential to modern life

  12. Genetics of bovine vaccination 

    E-Print Network [OSTI]

    Leach, Richard Jonathan

    2011-06-27T23:59:59.000Z

    Infectious disease is an important issue for animal breeders, farmers and governments. Solutions to control infectious disease are needed and research focused on the genetic loci determining variation in immune-related ...

  13. Manika Prasad is currently Associate Professor of Petroleum Engineering at the Colorado School of Mines. She directs the O-CLASSH (Organic, Clay, Sand, Shale) research group and the

    E-Print Network [OSTI]

    of Mines. She directs the O-CLASSH (Organic, Clay, Sand, Shale) research group and the co interested to understand how the ant-sized phenomena control elephant-sized features. She has published

  14. Engineering AnteaterDrive

    E-Print Network [OSTI]

    Mease, Kenneth D.

    Rockw ell & M DEA Engineering Tower AnteaterDrive AnteaterDrive East Peltason Drive EastPeltasonDrive East Peltason Drive Anteater Parking Structure EngineeringServiceRoad Engineering Laboratory Facility Engineering Gateway Engineering Hall AIRB Calit2 Engineering Lecture Hall Campus Building Engineering Building

  15. Bacterial Population Genetics in a Forensic Context

    SciTech Connect (OSTI)

    Velsko, S P

    2009-11-02T23:59:59.000Z

    This report addresses the recent Department of Homeland Security (DHS) call for a Phase I study to (1) assess gaps in the forensically relevant knowledge about the population genetics of eight bacterial agents of concern, (2) formulate a technical roadmap to address those gaps, and (3) identify new bioinformatics tools that would be necessary to analyze and interpret population genetic data in a forensic context. The eight organisms that were studied are B. anthracis, Y. pestis, F. tularensis, Brucella spp., E. coli O157/H7, Burkholderia mallei, Burkholderia pseudomallei, and C. botulinum. Our study focused on the use of bacterial population genetics by forensic investigators to test hypotheses about the possible provenance of an agent that was used in a crime or act of terrorism. Just as human population genetics underpins the calculations of match probabilities for human DNA evidence, bacterial population genetics determines the level of support that microbial DNA evidence provides for or against certain well-defined hypotheses about the origins of an infecting strain. Our key findings are: (1) Bacterial population genetics is critical for answering certain types of questions in a probabilistic manner, akin (but not identical) to 'match probabilities' in DNA forensics. (2) A basic theoretical framework for calculating likelihood ratios or posterior probabilities for forensic hypotheses based on microbial genetic comparisons has been formulated. This 'inference-on-networks' framework has deep but simple connections to the population genetics of mtDNA and Y-STRs in human DNA forensics. (3) The 'phylogeographic' approach to identifying microbial sources is not an adequate basis for understanding bacterial population genetics in a forensic context, and has limited utility, even for generating 'leads' with respect to strain origin. (4) A collection of genotyped isolates obtained opportunistically from international locations augmented by phylogenetic representations of relatedness will not and enzootic outbreaks noted through international outbreak surveillance systems, and 'representative' genetic sequences from each outbreak. (5) Interpretation of genetic comparisons between an attack strain and reference strains requires a model for the network structure of maintenance foci, enzootic outbreaks, and human outbreaks of that disease, coupled with estimates of mutational rate constants. Validation of the model requires a set of sequences from exemplary outbreaks and laboratory data on mutation rates during animal passage. The necessary number of isolates in each validation set is determined by disease transmission network theory, and is based on the 'network diameter' of the outbreak. (6) The 8 bacteria in this study can be classified into 4 categories based on the complexity of the transmission network structure of their natural maintenance foci and their outbreaks, both enzootic and zoonotic. (7) For B. anthracis, Y. pestis, E. coli O157, and Brucella melitensis, and their primary natural animal hosts, most of the fundamental parameters needed for modeling genetic change within natural host or human transmission networks have been determined or can be estimated from existing field and laboratory studies. (8) For Burkholderia mallei, plausible approaches to transmission network models exist, but much of the fundamental parameterization does not. In addition, a validated high-resolution typing system for characterizing genetic change within outbreaks or foci has not yet been demonstrated, although a candidate system exists. (9) For Francisella tularensis, the increased complexity of the transmission network and unresolved questions about maintenance and transmission suggest that it will be more complex and difficult to develop useful models based on currently available data. (10) For Burkholderia pseudomallei and Clostridium botulinum, the transmission and maintenance networks involve complex soil communities and metapopulations about which very little is known. It is not clear that these pathogens can be brought into the in

  16. College of Engineering College of Engineering

    E-Print Network [OSTI]

    Stephens, Graeme L.

    Outcomes Graduates of the undergraduate engineering programs will be able to: Apply knowledge the impact of engineering solutions in a global, economic, environmental, and societal context, A knowledgeCollege of Engineering _______________ 2.8 Page 1 College of Engineering Office in Engineering

  17. College of Engineering College of Engineering

    E-Print Network [OSTI]

    Outcomes Graduates of the undergraduate engineering programs will be able to: · Apply knowledge the impact of engineering solutions in a global, economic, environmental, and societal context. · A knowledgeCollege of Engineering _______________ 2.7 Page 1 College of Engineering Office in Engineering

  18. College of Engineering and Science ENGINEERING

    E-Print Network [OSTI]

    Stuart, Steven J.

    to · apply knowledge of math, science, and engi- neering · formulate and solve engineering problems · design81 College of Engineering and Science COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering.clemson.edu. Minors Engineering and science students can complement their majors by selecting minor concentrations

  19. College of Engineering and Science ENGINEERING AND

    E-Print Network [OSTI]

    Stuart, Steven J.

    of producing engineering graduates who are able to ·apply knowledge of math, science, and engineering88 College of Engineering and Science 88 COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering and Science offers a broad range of rigorous and stimulating baccalaureate programs that provide

  20. College of Engineering and Science ENGINEERING AND

    E-Print Network [OSTI]

    Stuart, Steven J.

    graduates who are able to ·apply knowledge of math, science, and engineering · identify, formulate87 College of Engineering and Science COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering educational oppor- tunities. The innovative combination of engineering and science disciplines that comprises

  1. Electrical and Computer Engineering Electrical Engineering

    E-Print Network [OSTI]

    Heller, Barbara

    Electrical and Computer Engineering Electrical Engineering Department Website: www.iit.edu/engineering/ece Electrical engineering is concerned with the generation, transmission, and utilization of electrical energy and with the transmitting and processing of information. Electrical engineers are involved in the analysis, design, and pro

  2. Northwestern Engineering Electrical Engineering & Computer Science

    E-Print Network [OSTI]

    Kuzmanovic, Aleksandar

    McCormick Northwestern Engineering 1 Electrical Engineering & Computer Science Learning to Group- keng Liao, Alok Choudhary Dept. of Electrical Engineering and Computer Science Center for Ultra.northwestern.edu #12;McCormick Northwestern Engineering 2 Electrical Engineering & Computer Science Introduction

  3. Northwestern Engineering Electrical Engineering & Computer Science

    E-Print Network [OSTI]

    Kuzmanovic, Aleksandar

    McCormick Northwestern Engineering 1 Electrical Engineering & Computer Science SES: Sentiment, Diana Palsetia, Kathy Lee, Wei-keng Liao, Alok Choudhary Dept. of Electrical Engineering and Computer Mining Vancouver, Canada, December 2011 #12;McCormick Northwestern Engineering 2 Electrical Engineering

  4. College of Engineering WORLD-CLASS ENGINEERING

    E-Print Network [OSTI]

    Maroncelli, Mark

    College of Engineering WORLD-CLASS ENGINEERING in Learning, Discovery and Engagement 2014-2019 STRATEGY #12;College of Engineering PREAMBLE The College of Engineering at Penn State is a leading academy, research enterprise and service to the global engineering community. Innovation is a hallmark of Penn State

  5. Faculty of Engineering Engineering and Computing

    E-Print Network [OSTI]

    Walkley, Mark

    Faculty of Engineering Engineering and Computing Postgraduate Masters Courses 2015 TOP 100 UNIVERSITY FOR ENGINEERING AND TECHNOLOGY Tim es H igher W orld U niversity Rankings #12;UNIVERSITY OF LEEDS FACULTY OF ENGINEERING www.engineering.leeds.ac.uk POSTGRADUATE MASTERS COURSES 2015 2 The University

  6. Dept. of Mechanical Engineering 1500 Engineering Dr.

    E-Print Network [OSTI]

    Sheridan, Jennifer

    Dept. of Mechanical Engineering 1500 Engineering Dr. University of Wisconsin ­ Madison Madison, WI. of Mechanical Engineering 2008 ­ Present Director of Engine Research Center 2003 ­ 2007 Associate Professor ­ 1995 Research Assistant Stanford University, Stanford, CA 1984 ­ 1989 Research Engineer Flow Research

  7. StormwaterStormwater EngineeringEngineering

    E-Print Network [OSTI]

    Hunt, William F.

    ­ Water Harvesting #12;2 "We Bring Engineering to Life"BAE Stormwater Engineering GroupBAE Stormwater Harvesting: Balance ofWater Harvesting: Balance of Water Supply & DemandWater Supply & Demand 0 5 10 15 20 25 Bring Engineering to Life"BAE Stormwater Engineering GroupBAE Stormwater Engineering Group Water

  8. Industrial & Systems Engineering Areas of Engineering Interests

    E-Print Network [OSTI]

    Berdichevsky, Victor

    Industrial & Systems Engineering Areas of Engineering Interests The Department of Industrial and Systems Engineering understands our students may work as Industrial Engineers in other engineering industries, and to help prepare them for these careers, the ISE Areas of Interest was formulated. The courses

  9. NITINOL ENGINE DEVELOPMENT

    E-Print Network [OSTI]

    Banks, Ridgway

    2013-01-01T23:59:59.000Z

    20, 1976 LBL-5293 NITINOL ENGINE DEVELOPMENT Ridgway Banksof California. NITINOL ENGINE DEVELOPMENT Ridgway Banks andof practical heat engines based on this phenomenon is

  10. Engineering the global ecosystem

    E-Print Network [OSTI]

    Stringfellow, William T.; Jain, Ravi

    2010-01-01T23:59:59.000Z

    of humans deliberately engineering agricultural landscapes.010-0302-8 EDITORIAL Engineering the global ecosystemtale about human explorers engineering the ecosystem of Mars

  11. Civil & Environmental Engineering

    E-Print Network [OSTI]

    Thomas, Andrew

    Civil & Environmental Engineering Undergraduate Guide June, 2011 #12;1 TABLE OF CONTENTS WELCOME..............................................................................................4 CIVIL ENGINEERING CURRICULUM.....................................................................................5 CIVIL ENGINEERING CURRICULUM FORM

  12. Civil & Environmental Engineering

    E-Print Network [OSTI]

    Thomas, Andrew

    Civil & Environmental Engineering Undergraduate Guide June, 2014 #12;- 1 - TABLE OF CONTENTS WELCOME TO CIVIL & ENVIRONMENTAL ENGINEERING ......................................................................................................................- 4 - CIVIL ENGINEERING CURRICULUM

  13. Nuclear Engineer

    Broader source: Energy.gov [DOE]

    This position is located in the Office of Enterprise Assessments (EA). EA is the Department of Energys (DOE) autonomous organization responsible for performance of assessments, on behalf of the...

  14. Undergraduate Engineering

    E-Print Network [OSTI]

    Bristol, University of

    , spacecraft, Formula 1 or wind power, then this is the course for you. Our degrees focus on the technical material that interests you from the start, ensuring theoretical ideas are set clearly in a practical Laboratory for Advanced Dynamic Engineering (BLADE) ­ fantastic world-class facilities for cutting

  15. Value Engineering

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-01-07T23:59:59.000Z

    To establish Department of Energy (DOE) value engineering policy that meets the requirements of Public Law 104-106, Section 4306 as codified by 41 United States Code 432. Canceled by DOE N 251.94. Does not cancel other directives.

  16. INTELLIGENT ENGINEERING

    E-Print Network [OSTI]

    Wehenkel, Louis

    CPSPP'97 ­ IFAC/CIGRE SYMPOSIUM ON CONTROL OF POWER SYSTEMS AND POWER PLANTS TUTORIAL COURSE ON INTELLIGENT SYSTEMS AND THEIR POWER ENGINEERING APPLICATIONS AUTOMATIC LEARNING APPLICATIONS TO DSA Learning) THEN (class=stable) Automatic Louis WEHENKEL University of Liâ?? ege ­ Belgium Final version of the course notes

  17. Harmonic engine

    DOE Patents [OSTI]

    Bennett, Charles L.; Sewall, Noel; Boroa, Carl

    2014-08-19T23:59:59.000Z

    An engine based on a reciprocating piston engine that extracts work from pressurized working fluid. The engine includes a harmonic oscillator inlet valve capable of oscillating at a resonant frequency for controlling the flow of working fluid into of the engine. In particular, the inlet valve includes an inlet valve head and a spring arranged together as a harmonic oscillator so that the inlet valve head is moveable from an unbiased equilibrium position to a biased closed position occluding an inlet. Upon releasing the inlet valve the inlet valve head undergoes a single oscillation past the equilibrium positio to a maximum open position and returns to a biased return position close to the closed position to choke the flow and produce a pressure drop across the inlet valve causing the inlet valve to close. Protrusions carried either by the inlet valve head or piston head are used to bump open the inlet valve from the closed position and initiate the single oscillation of the inlet valve head, and protrusions carried either by the outlet valve head or piston head are used to close the outlet valve ahead of the bump opening of the inlet valve.

  18. Preparing for Transfer Biological Engineering

    E-Print Network [OSTI]

    Walter, M.Todd

    Environmental Engineering Game Design Industrial Systems & Information Technology Information Science MaterialsPreparing for Transfer Majors: Biological Engineering Chemical Engineering Civil Engineering Computer Science Electrical & Computer Engineering Engineering Physics Environmental Engineering

  19. Virtual Library on Genetics from Oak Ridge National Laboratory

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    The World Wide Web (WWW) Virtual Library is a collaborative effort to provide topic indices that break down into many subtopics guiding users to vast resources of information around the world. ORNL hosts the Virtual Library on Genetics as part of the WWWVL's Biosciences topic area. The VL on Genetics is also a collection of links to information resources that supported the DOE Human Genome Project. That project has now evolved into Genomics: GTL. GTL is DOE's next step in genomics--builds on data and resources from the Human Genome Project, the Microbial Genome Program, and systems biology. GTL will accelerate understanding of dynamic living systems for solutions to DOE mission challenges in energy and the environment. The section of the Virtual Library on Genetics that is titled Organisms guides users to genetic information resources and gene sequences for animals, insects, microbes, and plant life.

  20. MMEECCHHAANNIICCAALL ENGINEERING PROGRAM

    E-Print Network [OSTI]

    Fernandez, Eduardo

    the ability to apply knowledge to the analysis and solution of significant engineering problems throughMMEECCHHAANNIICCAALL ENGINEERING PROGRAM UNDERGRADUATE OVERVIEW Mechanical Engineering is the branch of engineering that is most directly and broadly concerned with mechanical systems

  1. Electrical/Electronic Engineering

    E-Print Network [OSTI]

    Berdichevsky, Victor

    Electrical/Electronic Engineering Technology The Division of Engineering of Science in Electrical/Electronic Engineering Technology Get ready for a dynamic career in Electrical/Electronic Engineering Technology. Possible applications

  2. Mechanical Engineering & Thermal Group

    E-Print Network [OSTI]

    Mojzsis, Stephen J.

    Mechanical Engineering & Thermal Group The Mechanical Engineering (ME) & Thermal Group at LASP has · STOP (Structural, Thermal, and Optical Performance) analyses of optical systems Thermal engineers lead evolved with the complexity of instrument design demands, LASP mechanical engineers develop advanced

  3. Biotech Crops and Foods Science, Myth, and Madness

    E-Print Network [OSTI]

    Tullos, Desiree

    /or insertion of DNA GMO = genetically modified organism GEO = genetically engineered organism The terms that eating a genetically modified fruit would not cause their own genes to become modified #12;Bottom lines genetically modified

  4. Department of MINING ENGINEERING

    E-Print Network [OSTI]

    Simons, Jack

    AS A MINING ENGINEER IMAGINE IMAGINE Department of MINING ENGINEERING THE UNIVERSITY OF UTAH www.mining

  5. FACULTY OF ENGINEERING FALL Engineering

    E-Print Network [OSTI]

    Shoubridge, Eric

    endowed a similar institute that will focus on sustainable energy practices. Collaboration between the two engineering schools will include an annual public symposium to focus attention on the relevance of sustainable at the Montreal-based consulting firm, Groupe ABS. Among other services, the company conducts compliance audits

  6. in Civil Engineering Megastructure Engineering

    E-Print Network [OSTI]

    van der Torre, Leon

    and Soil Mechanics "This unique Master`s degree offers individual tutoring and an international learning, such as project management and managerial accounting; · Operate in an international environment in civil engineering; · Oversee the consequences of his/her actions regarding time and transport planning

  7. in Civil Engineering Megastructure Engineering

    E-Print Network [OSTI]

    van der Torre, Leon

    and Soil Mechanics "This unique Master`s degree offers individual tutoring and an international learning-technical aspects, such as project management and managerial accounting; · Operate in an international environment in civil engineering; · Oversee the consequences of his/her actions regarding time and transport planning

  8. Patient Care a Genetic Counselor

    E-Print Network [OSTI]

    Berdichevsky, Victor

    and research activities. Because of the many advances in medical genetics and genomic medicine, tremendous of basic science, epidemiological principles, medical genetics, and counseling theory with their skills settings such as university medical centers, private hospitals, physician offices, health maintenance

  9. The optimization problem Genetic Algorithm

    E-Print Network [OSTI]

    Giménez, Domingo

    The optimization problem Genetic Algorithm Particle Swarm Optimization Experimental results for time-power optimization META, October 27-31, 2014 1 / 25 #12;The optimization problem Genetic Algorithm Particle Swarm Optimization Experimental results Conclusions Time and energy optimization Traditionally

  10. Organizing Committee

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)IntegratedSpeeding access toTest andOptimize carbon AboutOrganizing Committee

  11. Electrical and computer engineering

    E-Print Network [OSTI]

    Berdichevsky, Victor

    Electrical and computer engineering COLLEGE of ENGINEERING DepartmentofElectricalandComputerEngineering engineers for 80 years t Home to nation's first electric-drive vehicle engineering program and alternative-credit EDGE Engineering Entrepreneur Certificate Program is a great addition to an electrical

  12. Engineering Research, Development and Technology, FY95: Thrust area report

    SciTech Connect (OSTI)

    NONE

    1996-02-01T23:59:59.000Z

    The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the knowledge base, process technologies, specialized equipment, tools and facilities to support current and future LLNL programs. Engineering`s efforts are guided by a strategy that results in dual benefit: first, in support of Department of Energy missions, such as national security through nuclear deterrence; and second, in enhancing the nation`s economic competitiveness through their collaboration with US industry in pursuit of the most cost-effective engineering solutions to LLNL programs. To accomplish this mission, the Engineering Research, Development, and Technology Program has two important goals: (1) identify key technologies relevant to LLNL programs where they can establish unique competencies, and (2) conduct high-quality research and development to enhance their capabilities and establish themselves as the world leaders in these technologies. To focus Engineering`s efforts, technology thrust areas are identified and technical leaders are selected for each area. The thrust areas are comprised of integrated engineering activities, staffed by personnel from the nine electronics and mechanical engineering divisions, and from other LLNL organizations. This annual report, organized by thrust area, describes Engineering`s activities for fiscal year 1995. The report provides timely summaries of objectives methods, and key results from eight thrust areas: computational electronics and electromagnetics; computational mechanics; microtechnology; manufacturing technology; materials science and engineering; power conversion technologies; nondestructive evaluation; and information engineering.

  13. Characterization of Mineralogical & Genetic Events

    SciTech Connect (OSTI)

    Dr.Timothy Magnuson

    2001-11-30T23:59:59.000Z

    OAK 270 - characterization of mineralogical and molecular genetic events assoc. w/colonization of mineral surfaces by geobacter

  14. Genetic Algorithms Artificial Life

    E-Print Network [OSTI]

    Forrest, Stephanie

    systems tremendously. Likewise, evolution of artificial systems is an important component of artificial) are currently the most promi­ nent and widely used models of evolution in artificial­life systems. GAs have beenGenetic Algorithms and Artificial Life Melanie Mitchell Santa Fe Institute 1660 Old Pecos Tr

  15. Tumor Engineering: The Other Face of Tissue Engineering

    SciTech Connect (OSTI)

    Ghajar, Cyrus M; Bissell, Mina J

    2010-03-09T23:59:59.000Z

    Advances in tissue engineering have been accomplished for years by employing biomimetic strategies to provide cells with aspects of their original microenvironment necessary to reconstitute a unit of both form and function for a given tissue.We believe that the most critical hallmark of cancer is loss of integration of architecture and function; thus, it stands to reason that similar strategies could be employed to understand tumor biology. In this commentary, we discuss work contributed by Fischbach-Teschl and colleagues to this special issue of Tissue Engineering in the context of 'tumor engineering', that is, the construction of complex cell culture models that recapitulate aspects of the in vivo tumor microenvironment to study the dynamics of tumor development, progression, and therapy on multiple scales. We provide examples of fundamental questions that could be answered by developing such models, and encourage the continued collaboration between physical scientists and life scientists not only for regenerative purposes, but also to unravel the complexity that is the tumor microenvironment. In 1993, Vacanti and Langer cast a spotlight on the growing gap between patients in need of organ transplants and the amount of available donor organs; they reaffirmed that tissue engineering could eventually address this problem by 'applying principles of engineering and the life sciences toward the development of biological substitutes. Mortality figures and direct health care costs for cancer patients rival those of patients who experience organ failure. Cancer is the second leading cause of death in the United States (Source: American Cancer Society) and it is estimated that direct medical costs for cancer patients approach $100B yearly in the United States alone (Source: National Cancer Institute). In addition, any promising therapy that emerges from the laboratory costs roughly $1.7B to take from bench to bedside. Whereas we have indeed waged war on cancer, the training grounds have largely consisted of small rodents, despite marked differences between human and mouse physiology, or plastic dishes, even though just like our tissues and organs most tumors exist within three-dimensional proteinacious milieus. One could argue that this is comparable to training for a desert war in the arctic. In this special issue of tissue engineering, Fischbach-Teschl and colleagues build a strong case for engineering complex cultures analogous to normal organs to tractably model aspects of the human tumor microenvironment that simply cannot be reproduced with traditional two-dimensional cell culture techniques and that cannot be studied in a controlled fashion in vivo. This idea has gained considerable traction of late as concepts presented and convincingly shown years ago have only now begun to be appreciated. Perhaps, then, it is time to organize those who wish to build complex tumor models to study cancer biology under a common umbrella. Accordingly, we propose that tumor engineering be defined as the construction of complex culture models that recapitulate aspects of the in vivo tumor microenvironment to study the dynamics of tumor development, progression, and therapy on multiple scales. Inherent in this definition is the collaboration that must occur between physical and life scientists to guide the design of patterning techniques, materials, and imaging modalities for the study of cancer from the subcellular to tissue level in physiologically relevant contexts. To date, the most successful tissue engineering approaches have employed methods that recapitulate the composition, architecture, and/or chemical presentation of native tissue. For instance, induction of blood vessel growth for therapeutic purposes has been achieved with sequential release of vascular endothelial growth factor (VEGF) and platelet derived growth factor to induce and stabilize blood vessels. This approach imitates that which occurs during physiological angiogenesis as a result of heterotypic interactions between endothelium and stroma. Employing such biomimetic

  16. College of Engineering and Science ENGINEERING AND

    E-Print Network [OSTI]

    Stuart, Steven J.

    graduates who are able to ·apply knowledge of math, science, and engineering · identify, formulate86 College of Engineering and Science 86 COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering and Science offers a broad range of rigorous and stimulating baccalaure- ate programs which

  17. College of Engineering and Science ENGINEERING

    E-Print Network [OSTI]

    Stuart, Steven J.

    to · apply knowledge of math, science, and engi- neering · formulate and solve engineering problems · design80 College of Engineering and Science 80 COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering and Science offers a broad range of rigorous and stimulating baccalaure- ate programs which

  18. Software Engineering, an established Accreditable Engineering Discipline

    E-Print Network [OSTI]

    Szabados, Barna

    Software Engineering, an established Accreditable Engineering Discipline By B.Szabados, P.Eng, Mc of the Canadian Engineering Accreditation Board (CEAB), as well as at a workshop at the NCDEAS meeting in September 1997. 1. INTRODUCTION In the late seventies, the discipline of Computer Engineering has evolved

  19. College of Engineering MFS Manufacturing Systems Engineering

    E-Print Network [OSTI]

    MacAdam, Keith

    ) The topics will include fundamentals of concurrent engineering, product life cycle, product specificationCollege of Engineering MFS Manufacturing Systems Engineering KEY: # = new course * = course changed of these processes. Lecture, two hours; laboratory; two hours. Prereq: EM 302, EM 313, and engineering standing

  20. College of Engineering CME Chemical Engineering

    E-Print Network [OSTI]

    MacAdam, Keith

    College of Engineering CME Chemical Engineering KEY: # = new course * = course changed = course dropped University of Kentucky 2013-2014 Undergraduate Bulletin 1 CME 006 THE ENGINEERING PROFESSION (JUNIOR AND SENIOR). (0) Activities of the Student Chapter of the American Institute of Chemical Engineers

  1. College of Engineering CE Civil Engineering

    E-Print Network [OSTI]

    MacAdam, Keith

    College of Engineering CE Civil Engineering KEY: # = new course * = course changed = course.Lecture,twohours;laboratory,fourhoursperweek.Prereqorcoreq:MA113orconsentofinstructor. CE 120 INTRODUCTION TO CIVIL ENGINEERING. (1) An introduction to the civil engineering profession and the use of computer hardware and software in CE systems analysis and design

  2. MASTER OF ENGINEERING Biological and Environmental Engineering

    E-Print Network [OSTI]

    Walter, M.Todd

    MASTER OF ENGINEERING Biological and Environmental Engineering Program Requirements Fall 2013 The Master of Engineering (MEng) is a professional degree program intended for those who have a Bachelors degree or equivalent in an engineering or closely related science field from a college or university

  3. MASTER OF ENGINEERING Biological and Environmental Engineering

    E-Print Network [OSTI]

    Walter, M.Todd

    MASTER OF ENGINEERING Biological and Environmental Engineering Program Requirements Fall 2014 The Master of Engineering (MEng) is a professional degree program intended for those who have a Bachelors degree or equivalent in an engineering or closely related science field from a college or university

  4. College of Engineering and Science ENGINEERING

    E-Print Network [OSTI]

    Stuart, Steven J.

    84 College of Engineering and Science 84 COLLEGE OF ENGINEERING AND SCIENCE The College of Engineering and Science offers a broad range of rigorous and stimulating baccalaure- ate programs which is available at www. ces.clemson.edu. Minors Engineering and science students can complement their majors

  5. Photocurable Inorganic-Organic Hydrogels for Biomedical Applications 

    E-Print Network [OSTI]

    Hou, Yaping

    2011-02-22T23:59:59.000Z

    -DA) with tunable chemical and physical properties for use as tissue engineering scaffolds. These inorganic-organic hydrogels provide a useful platform to study the effect of scaffold properties on cell behavior in tissue culture. Twenty compositionally unique...

  6. German engineers study UMTRA cleanup programs

    SciTech Connect (OSTI)

    Not Available

    1994-01-01T23:59:59.000Z

    Two environmental engineers from Germany's WISMUT, the organization responsible for uranium tailings cleanup in that country, recently completed extensive training as part of a technology transfer program at the US DOE. For six weeks the two engineers studied the practices employed in the cleanup of the DOE's UMTRA (Uranium Mill Tailings Remedial Action) sites, hoping to gain insight into how Germany's own cleanup program should proceed.

  7. From association to organization

    E-Print Network [OSTI]

    Mandler, George

    2011-01-01T23:59:59.000Z

    S.M. (1978). Organization theory and memory for prose: Aand summarize organization theory and relevant empiricalexplained in terms of organization theory. The hierarchical

  8. Organization Chart - Home

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LSD Logo About Us People & Organization Research News & Events Safety Internal Resources Organization Chart Departments Scientific Staff Directory Committees Organization Chart...

  9. Electrical and Electronic Engineering 1 Faculty of Engineering, Department of

    E-Print Network [OSTI]

    Electrical and Electronic Engineering 1 Faculty of Engineering, Department of --Electrical.imperial.ac.uk/pgprospectus. #12;Undergraduate syllabuses2 Electrical and Electronic Engineering Imperial College provides Engineering (EEE) and Information Systems Engineering (ISE). Electrical and Electronic Engineering (EEE

  10. Are Organic Foods Safer or Healthier Than Conventional Alternatives? A Systematic Review

    E-Print Network [OSTI]

    Wang, Changlu

    irradiation or chemical food additives and are not grown from genetically modified organisms (6, 8Are Organic Foods Safer or Healthier Than Conventional Alternatives? A Systematic Review Crystal of organic foods are unclear. Purpose: To review evidence comparing the health effects of or- ganic

  11. The following courses will fulfill Biomedical Engineering technical electives for students in Biomedical Engineering and Chemical & Biomedical Engineering (3 credits required), Biomedical Engineering and Electrical Engineering (9 credits

    E-Print Network [OSTI]

    Stephens, Graeme L.

    and Electrical Engineering (9 credits required), Biomedical Engineering and Electrical Engineering with LasersThe following courses will fulfill Biomedical Engineering technical electives for students in Biomedical Engineering and Chemical & Biomedical Engineering (3 credits required), Biomedical Engineering

  12. Quantitative genetic activity graphical profiles for use in chemical evaluation

    SciTech Connect (OSTI)

    Waters, M.D. [Environmental Protection Agency, Washington, DC (United States); Stack, H.F.; Garrett, N.E.; Jackson, M.A. [Environmental Health Research and Testing, Inc., Research Triangle Park, NC (United States)

    1990-12-31T23:59:59.000Z

    A graphic approach, terms a Genetic Activity Profile (GAP), was developed to display a matrix of data on the genetic and related effects of selected chemical agents. The profiles provide a visual overview of the quantitative (doses) and qualitative (test results) data for each chemical. Either the lowest effective dose or highest ineffective dose is recorded for each agent and bioassay. Up to 200 different test systems are represented across the GAP. Bioassay systems are organized according to the phylogeny of the test organisms and the end points of genetic activity. The methodology for producing and evaluating genetic activity profile was developed in collaboration with the International Agency for Research on Cancer (IARC). Data on individual chemicals were compiles by IARC and by the US Environmental Protection Agency (EPA). Data are available on 343 compounds selected from volumes 1-53 of the IARC Monographs and on 115 compounds identified as Superfund Priority Substances. Software to display the GAPs on an IBM-compatible personal computer is available from the authors. Structurally similar compounds frequently display qualitatively and quantitatively similar profiles of genetic activity. Through examination of the patterns of GAPs of pairs and groups of chemicals, it is possible to make more informed decisions regarding the selection of test batteries to be used in evaluation of chemical analogs. GAPs provided useful data for development of weight-of-evidence hazard ranking schemes. Also, some knowledge of the potential genetic activity of complex environmental mixtures may be gained from an assessment of the genetic activity profiles of component chemicals. The fundamental techniques and computer programs devised for the GAP database may be used to develop similar databases in other disciplines. 36 refs., 2 figs.

  13. Administration& Engineering

    E-Print Network [OSTI]

    Row 3 Site 3.4 Site 3.3 Site 4.4 Site 4.5 Site 4.1 Site 4.0 4.0 Met Tower Administration& Engineering Bldg. 251 OfficeTrailer Bldg.250 OfficeTrailer Bldg.249OfficeTrailer Bldg.248 251 Parking W. 120th Ave. W. 119th Ave. 4.1 Met Tower 4.4 Met Tower Site 3.1 5-MWDyno Bldg. 258 Site 1.1 Site M1 Structural

  14. Engineering Institute

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMFormsGasReleaseSpeeches Energy Speeches RSS JuneInstitute Engineering

  15. Tisch Library Organization Chart Dean for Arts & Sciences

    E-Print Network [OSTI]

    Tufts University

    Administrative Dean for Engineering Brady, Susan Library Assistant II Marc Raila Digital Media TechnologistTisch Library Organization Chart 10/02/13 Provost Dean for Arts & Sciences Laura Wood Director, Tisch Library LMC EC Dean for Engineering Rogan, Michael Head of Lilly Music Library LMC Morris, Alicia

  16. Mehrdad Negahban, Associate Chair for Graduate Studies and Research Mechanical Engineering, Engineering Mechanics, Materials Engineering, Biomedical Engineering

    E-Print Network [OSTI]

    Farritor, Shane

    Wave Propagation · Solar Engineering · Thermal-Fluids Engineering 3 John P. Barton #12;MechanicalMehrdad Negahban, Associate Chair for Graduate Studies and Research #12;Mechanical Engineering, Engineering Mechanics, Materials Engineering, Biomedical Engineering The graduate program in Mechanical

  17. Genetic engineering of bacteriophage and its applications for biomimetic materials

    E-Print Network [OSTI]

    Lee, Soo-Kwan

    2006-01-01T23:59:59.000Z

    Filamentous bacteriophage (M13) are excellent biological build block due to their multiple peptide display system including type 8 (complete peptide display at pVIII) and type 83 (complete peptide display at both pVIII and ...

  18. Treatment of tumors with genetically engineered herpes virus

    DOE Patents [OSTI]

    Weichselbaum, Ralph R; Roizman, Bernard; Whitley, Richard J

    2012-11-27T23:59:59.000Z

    Disclosed are methods for treating cancer by administering an effective amount of a modified Herpes simplex virus.

  19. Use of linalool synthase in genetic engineering of scent production

    DOE Patents [OSTI]

    Pichersky, Eran (Chelsea, MI)

    1998-01-01T23:59:59.000Z

    A purified S-linalool synthase polypeptide from Clarkia breweri is disclosed as is the recombinant polypeptide and nucleic acid sequences encoding the polypeptide. Also disclosed are antibodies immunoreactive with the purified peptide and with recombinant versions of the polypeptide. Methods of using the nucleic acid sequences, as well as methods of enhancing the smell and the flavor of plants expressing the nucleic acid sequences are also disclosed.

  20. Remodelling the cavity of a transmembrane pore by genetic engineering

    E-Print Network [OSTI]

    Jung, Yunhee

    2006-08-16T23:59:59.000Z

    ) Structures of ? HL: fully assembled heptameric pore and water-soluble monomer The structure of the heptameric, active form of alpha-hemolysin (? HL) has been determined in the presence of detergent micelles (1, 11) at ~1.6 ? resolution. ? HL is secreted... regulatory subunits and two catalytic subunits, which dissociate upon activation by cAMP (48). Cooperative binding of cAMP to regulatory subunit triggers a conformational change that releases the catalytic subunits. The heat-stable protein kinase inhibitor...

  1. Optimizing Organ Allocation and Acceptance OGUZHAN ALAGOZ

    E-Print Network [OSTI]

    Schaefer, Andrew

    it is transplanted is called the cold ischemia time (CIT). During this time, organs are bathed in storage solutions J. SCHAEFER Departments of Industrial Engineering and Medicine University of Pittsburgh Pittsburgh of Transplant Recipients states that the acceptable cold ischemia time limit for a liver is 12 to 18 hours [22

  2. Proceedings of the 1998 diesel engine emissions reduction workshop [DEER

    SciTech Connect (OSTI)

    NONE

    1998-12-31T23:59:59.000Z

    This workshop was held July 6--9, 1998 in Castine, Maine. The purpose of this workshop was to provide a multidisciplinary forum for exchange of state-of-the-art information on reduction of diesel engine emissions. Attention was focused on the following: agency/organization concerns on engine emissions; diesel engine issues and challenges; health risks from diesel engines emissions; fuels and lubrication technologies; non-thermal plasma and urea after-treatment technologies; and diesel engine technologies for emission reduction 1 and 2.

  3. Engineering Analysis | ornl.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Home | Science & Discovery | Supercomputing and Computation | Research Areas | Engineering Analysis SHARE Engineering Analysis Engineering analysis involves the application...

  4. Understanding Degradation Pathways in Organic Photovoltaics (Poster)

    SciTech Connect (OSTI)

    Lloyd, M. T.; Olson, D. C.; Garcia, A.; Kauvar, I.; Kopidakis, N.; Reese, M. O.; Berry, J. J.; Ginley, D. S.

    2011-02-01T23:59:59.000Z

    Organic Photovoltaics (OPVs) recently attained power conversion efficiencies that are of interest for commercial production. Consequently, one of the most important unsolved issues facing a new industry is understanding what governs lifetime in organic devices and discovering solutions to mitigate degradation mechanisms. Historically, the active organic components are considered vulnerable to photo-oxidation and represent the primary degradation channel. However, we present several (shelf life and light soaking) studies pointing the relative stability of the active layers and instabilities in commonly used electrode materials. We show that engineering of the hole/electron layer at the electrode can lead to environmentally stable devices even without encapsulation.

  5. MMEECCHHAANNIICCAALL ENGINEERING PROGRAM

    E-Print Network [OSTI]

    Fernandez, Eduardo

    credits); either MAP 4306 Engineering Mathematics 2 or EOC 5172 Ocean Engineering Math 1. StudentsMMEECCHHAANNIICCAALL ENGINEERING PROGRAM MASTER OF SCIENCE WITH MAJOR IN MECHANICAL ENGINEERING elective courses (9 semester credits) at the 5000- or 6000-level from the list of Mechanical Engineering

  6. Photonic Science & Engineering

    E-Print Network [OSTI]

    Wu, Shin-Tson

    3321 Engineering Dynamics (3) EGN 3211 Engineering Analysis (3) STA 3032 Probability / Statistics (3Photonic Science & Engineering 2014-2015 Suggested Plan* www.creol.ucf.edu undergrad for Engineers I (4) PHY 3101 Physics for Engineers III (3) MAC 2311C** Calculus I (4) MAC 2312** Calculus II (4

  7. ?engineering columbia university

    E-Print Network [OSTI]

    ?engineering why engineeri columbia university engineering engineering why engineering for the world to use. The images below represent technological innovations pioneered by Columbia engineers. Can Parsons graduated from Columbia in 1882. 2.) Flat panel TV--Columbia Professor James Im developed

  8. ELECTRICAL ENGINEERING Curriculum Notes

    E-Print Network [OSTI]

    Mather, Patrick T.

    ELECTRICAL ENGINEERING Curriculum Notes 2013-2014 1. Electrical Engineering (EE) students must/programs/electrical_engineering) and minors are used to regulate technical electives. A student must complete four technical elective courses in Electrical Engineering or Computer Engineering. At a minimum

  9. engineering an undergraduate guide

    E-Print Network [OSTI]

    Hart, Gus

    MECHANICAL engineering an undergraduate guide v #12;ENGINEER'S If it isn't broken, take it apart and fix it. motto: " " #12;TABLE OF CONTENTS 1. What is mechanical engineering? 1 2. What can a mechanical engineer do with their degree? 2 3. What companies have hired BYU mechanical engineering graduates? 3 4

  10. INDUSTRIAL ENGINEERING GRADUATE PROGRAMS

    E-Print Network [OSTI]

    Gelfond, Michael

    : Occupational biomechanics, work physiology, industrial ergonomics, environmental hygiene, cognitive engineeringINDUSTRIAL ENGINEERING GRADUATE PROGRAMS The Master of Science in Industrial Engineering (M Systems and Engineering (M.S.M.S.E.), the Doctor of Philosophy in Industrial Engineering, and the Doctor

  11. Engineering Aerial view of

    E-Print Network [OSTI]

    Yang, Junfeng

    -neutral Torus 2 Climate Change 4 Combustion and Catalysis Laboratory #12;4 5 1Engineering Revolution 5 #12;6 7Columbia Engineering Plus #12;1 1 2 3 4 5 6 Aerial view of Columbia campus with Columbia Engineering-a liated buildings highlighted in blue Columbia Engineering Plus Engineering Revolution 4

  12. Stirling engine application study

    SciTech Connect (OSTI)

    Teagan, W.P.; Cunningham, D.R.

    1983-03-01T23:59:59.000Z

    The potential for Stirling engine applications in the 0.5 to 5000 hp output range is assessed. The following are included: a market survey of potential engine applications, classification of applications, conventional engine markets and performance characteristics, status of Sterling engine systems, selection of application classes for Stirling engines, and the possible effects of technology, economic conditions, and regulatory changes. (MHR)

  13. 2013-2014Series Engineering

    E-Print Network [OSTI]

    Hayes, Jane E.

    areas include construction engineering and project management, environmental engineering, geotechn ................................................. 4 Second Semester CE 331 Transportation Engineering* .......................................................3 CE 351 Introduction to Environmental Engineering .................................3 CE 382

  14. Utilizing Industrial Engineers to Implement "Lean Enterprise" at Company A

    E-Print Network [OSTI]

    Stein, Jean D'Ann

    2012-12-14T23:59:59.000Z

    in the implementation of continuous improvement and lean thinking. This skillset has recently allowed IEs to work outside their normal realm of manufacturing, and focus on areas more closely related to service organizations. At Company A, Industrial Engineers...

  15. Montana State University 1 College of Engineering

    E-Print Network [OSTI]

    Maxwell, Bruce D.

    Computer Engineering · BS Electrical Engineering · Department of Mechanical & Industrial Engineering (http:// catalog.montana.edu/undergraduate/engineering/mechanical-industrial- engineering) · BS Financial Engineering · BS Industrial Engineering · BS Mechanical Engineering · BS Mechanical Engineering Technology

  16. Fabrication of 1-dimensional nanowires from genetically modified M13 phage through surfactant-mediated hybridization and the applications in medical diagnosis, energy devices, and catalysis

    E-Print Network [OSTI]

    Lee, Youjin

    2010-01-01T23:59:59.000Z

    Biological building blocks served as excellent templates for the preparation of various nano-materials due to their beneficial interactions at the molecular level. The bio-mineralization of genetically engineered M13 ...

  17. Rotary engine

    SciTech Connect (OSTI)

    Brownfield, L.A.

    1980-12-02T23:59:59.000Z

    The major components of this rotary engine are two equal sized rotary units, the housing containing them along with associated ignition and cooling systems. Each of the rotary units consists of a shaft, gear, two outer compressor wheels, and one center power wheel which has twice the axial thickness as the compressor wheel. All the wheels are cylindrical in shape with a lobe section comprising a 180/sup 0/ arc on the periphery of each wheel which forms an expanding and contracting volumetric chamber by means of leading and trailing lips. The lobes of the first rotary unit are situated 180/sup 0/ opposite the lobes of the second adjacent mating rotary unit, thus lobes can intermesh with its corresponding wheel.

  18. Graduate Studies Geosystems Engineering

    E-Print Network [OSTI]

    Jacobs, Laurence J.

    in geo-based engineering fields. Geosystems engineering, includes geotechnics, geomechanics, geomaterials interaction; geotech- nical processes in energy and mining applications; geomechanics in geological processes Geomechanics · Foundation Systems · Geomechanics Modeling · Geotechnical Earthquake Engineering · Geotechnical

  19. Department of Engineering.

    E-Print Network [OSTI]

    Department of Civil & Structural Engineering. Vibration based Structural Health Monitoring James views of the same spectrum Department of Civil & Structural Engineering. Structural health monitoring of Sheffield, United Kingdom Department of Civil & Structural Engineering. HEALTH and PERFORMANCE are different

  20. Architecture Engineering Construction (AEC)

    E-Print Network [OSTI]

    Weber, David J.

    Architecture Engineering Construction (AEC) Presented to FM Staff February 25, 2009 Updated March 1, 2010 #12;University of Maryland Baltimore Director Architecture, Engineering and Construction Vacant Administration & Finance Kathleen M. Byington #12;Division of Facilities Management Architecture, Engineering

  1. INDUSTRIAL ENGINEER APPRENTICE OPPORTUNITY

    E-Print Network [OSTI]

    Pohl, Karsten

    INDUSTRIAL ENGINEER APPRENTICE OPPORTUNITY SUMMER 2013 Industrial Engineering COOP Student needed-Fri, for summer 2013. Student must be enrolled in BS Engineering program. (Preferably completed 2-3 yrs

  2. Mechanical & Industrial Engineering

    E-Print Network [OSTI]

    Mountziaris, T. J.

    Mechanical & Industrial Engineering 1 Welcome MIE Industrial Advisory Board October 15, 2010 #12;Mechanical & Industrial Engineering 2 MIE Dorothy Adams Undergraduate/Graduate Secretary David Schmidt Associate Professor & Graduate Program Director #12;Mechanical & Industrial Engineering 3 MIE James Rinderle

  3. Computational Chemical Materials Engineering

    E-Print Network [OSTI]

    Home Computational Chemical and Materials Engineering Tahir Cagin Chemical Engineering Department through processing for improving their performance for engineering applications · Use and develop with usable ­ Chemical ­ Electronic ­ Optical ­ Magnetic ­ Transport, thermal and mechanical properties

  4. Mechanical engineering Department Seminar

    E-Print Network [OSTI]

    and the Department of Mechanical Engineering Tufts University Retooling Our Energy Ecosystem: challengesMechanical engineering Department Seminar Robert J. Hannemann The Gordon Institute and Chair of the Tufts Department of Mechanical Engineering. His technical and academic interests

  5. Adsorption -capacity data for 283 organic compounds

    SciTech Connect (OSTI)

    Yaws, C.L.; Bu, L.; Nijhawan, S. [Lamar Univ., Beaumont, TX (United States)

    1995-05-01T23:59:59.000Z

    Adsorption on activated carbon is a widely used method for removing volatile organic compounds (VOCs) from gases and other exhaust streams. This article presents a compilation of adsorption-capacity data as a function of the VOC concentration in the gas. The results are useful in engineering and environmental studies, and in the design of carbon-based adsorption systems to remove unwanted organic pollutants from gases. For vapor control, carbon-based systems typically combine a carbon-adsorption unit with a secondary control method to reclaim or destroy the vapors desorbed during carbon-bed regeneration. To remove organics dissolved in wastewater, air stripping is typically used to transfer the organics to a vapor stream. Carbon adsorption is then used to separate the organics from the stripper exhaust. Collected vapors can be recovered for reuse or destroyed, depending on their value.

  6. International weekly journal of science Molecular engineering of a

    E-Print Network [OSTI]

    Manstein, Dietmar J.

    International weekly journal of science Molecular engineering of a backwards-moving myosin motor metabolism: strategies for regulation in the heat shock response. Trends Genet. 6, 223­227 (1990). 2. Yost, H­1211 (2000). 10. Manley, J. M. & Tacke, R. SR proteins and splicing control. Genes Dev. 10, 1569­1579 (1996

  7. MEDALLION CEREMONY College of Engineering, Architecture and Technology

    E-Print Network [OSTI]

    Piao, Daqing

    a decade it dominated oil refining and marketing in the Midwest. By the end of the 20th century, Amoco in Fire Protection and Safety Technology 18 Donald and Cathey Humphreys Chair in Industrial Engineering in Industrial Engineering and Management 40 #12;Active in many national organizations, he served the North

  8. Mechanical engineering Department Seminar

    E-Print Network [OSTI]

    Research Center. Currently he is an Assistant Prof. in the Aerospace and Ocean Engineering DepartmentMechanical engineering Department Seminar Cornel Sultan Virginia Tech Design for Control

  9. Facility Area Engineer

    Broader source: Energy.gov [DOE]

    A successful candidate in this position will provide cross-cutting engineering oversight of the contractor's engineering programs, processes, and products through design procurement, construction,...

  10. E85 Optimized Engine

    Broader source: Energy.gov (indexed) [DOE]

    Engine Apoorv Agarwal Ford Motor Company Paul Whitaker AVL Powertrain Engineering Inc Project ID: ft12agarwal March 20, 2009 This presentation does not contain any proprietary,...

  11. GEOMECHANICS RESEARCH Civil EngineeringCivil Engineering

    E-Print Network [OSTI]

    Levinson, David M.

    GEOMECHANICS RESEARCH Civil EngineeringCivil Engineering The Department ofThe Department of 2002 #12;Geomechanics at the University of Minnesota has its roots in the mining engineering and rock into the unified geomechanics program that exists today. Several significant contributions to the geomechanics

  12. How Concurrent Engineering Reconfigures Process Engineering Activity.

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    - 1 - CHAPTER 9 How Concurrent Engineering Reconfigures Process Engineering Activity. The case Within Department The implementation of concurrent approaches in projects is of relevance to companies). But several authors refer to the difficulties encountered in its deployment: "US engineers tended to quickly

  13. CollegeofEngineering College of Engineering

    E-Print Network [OSTI]

    Illinois at Chicago, University of

    and Engineering Offices (SEO) (312) 996-3463 http://www.engr.uic.edu or http@uic.edu Director of Engineering Admissions and Records, James Muench, jmuench@uic.edu Student Services: 123 SEO Academic Advising: 123 SEO (for appointments) Departments: Bioengineering (BIOE), Chemical Engineering (CHE

  14. FY08 Engineering Research and Technology Report

    SciTech Connect (OSTI)

    Minichino, C; McNichols, D

    2009-02-24T23:59:59.000Z

    This report summarizes the core research, development, and technology accomplishments in Lawrence Livermore National Laboratory's Engineering Directorate for FY2008. These efforts exemplify Engineering's more than 50-year history of developing and applying the technologies needed to support the Laboratory's national security missions. A partner in every major program and project at the Laboratory throughout its existence, Engineering has prepared for this role with a skilled workforce and technical resources developed through both internal and external venues. These accomplishments embody Engineering's mission: 'Enable program success today and ensure the Laboratory's vitality tomorrow.' Engineering's mission is carried out through basic research and technology development. Research is the vehicle for creating competencies that are cutting-edge, or require discovery-class groundwork to be fully understood. Our technology efforts are discipline-oriented, preparing research breakthroughs for broader application to a variety of Laboratory needs. The term commonly used for technology-based projects is 'reduction to practice.' As we pursue this two-pronged approach, an enormous range of technological capabilities result. This report combines our work in research and technology into one volume, organized into thematic technical areas: Engineering Modeling and Simulation; Measurement Technologies; Micro/Nano-Devices and Structures; Engineering Systems for Knowledge and Inference; and Energy Manipulation. Our investments in these areas serve not only known programmatic requirements of today and tomorrow, but also anticipate the breakthrough engineering innovations that will be needed in the future.

  15. Searching for people on Web search engines

    E-Print Network [OSTI]

    Jansen, James

    and retrieval of personal information. Many people and organizations mount Web sites containing large amounts. Introduction People search the Web for many things, including shopping, sex and information on a near infiniteSearching for people on Web search engines Amanda Spink and Bernard J. Jansen School of Information

  16. Engineering Notes Ice Shape Characterization Using

    E-Print Network [OSTI]

    Tino, Peter

    Engineering Notes Ice Shape Characterization Using Self-Organizing Maps Stephen T. McClain Baylor. Introduction DURING the validation and verification of ice accretion codes, predicted ice shapes must be compared with experimental measurements of wind-tunnel or atmospheric ice shapes. Current methods for ice

  17. CHEMICAL ENGINEERING Fall Term Spring Term

    E-Print Network [OSTI]

    Lee, Kelvin H.

    Thermodynamics 3 CHEG 325 Chemical Engineering Thermodynamics 3 CHEM 220 Quantitative Analysis* 3 CHEM 444 Physical Chemistry 3 CHEM 221 Quantitative Analysis Laboratory 1 CHEM 445 Physical Chemistry Laboratory and Risk Analysis 3 CHEG 341 Fluid Mechanics 3 CHEG 342 Heat and Mass Transfer 3 CHEM 331 Organic Chemistry

  18. CHEMICAL ENGINEERING DEPARTMENT TECHNICAL Electives Approved Courses

    E-Print Network [OSTI]

    Lu, Chang

    Biochemistry 1 3114 Biochem. for Biotechnology & Life Sci. 3 4115,4116 General Biochemistry 4,3 Chemical to Polymer Processing 3 4334 Intro to Colloid Interface Sci 3 ChE/BSE 4544 Protein Separation Engineering 3 Compounds 3 4534 Organic Chemistry of Polymers 3 #12;4554 Drug Chemistry 3 4616 Physical Chem. Life Sci. II

  19. Quality engineering as a discipline of study.

    SciTech Connect (OSTI)

    Kolb, Rachel R.; Hoover, Marcey L.

    2012-12-01T23:59:59.000Z

    The current framework for quality scholarship in the United States ranges from the training and education of future quality engineers, managers, and professionals to focused and sustained research initiatives that, through academic institutions and other organizations, aim to improve the knowledge and application of quality across a variety of sectors. Numerous quality journals also provide a forum for professional dissemination of information.

  20. College of Engineering Department of Civil and Environmental Engineering

    E-Print Network [OSTI]

    College of Engineering Department of Civil and Environmental Engineering Major in Environmental Engineering, Ecological Concentration Effective 2/26/2014 Departmental Electives for the Major in Environmental Engineering, Ecological Concentration Course Title Credits Engineering Tech Electives CIVE 413

  1. ENGINEERING SYSTEMS THE FUTURE OF ENGINEERING SYSTEMS: DEVELOPMENT OF

    E-Print Network [OSTI]

    de Weck, Olivier L.

    ENGINEERING SYSTEMS MONOGRAPH THE FUTURE OF ENGINEERING SYSTEMS: DEVELOPMENT OF ENGINEERING LEADERS OF ENGINEERING SYSTEMS: DEVELOPMENT OF ENGINEERING LEADERS Daniel Hastings INTRODUCTION From birth through death, inhabitants of developed societies live supported in a complex, interconnected set of overlapping systems

  2. EngineeringEngineering the University of Tennesseethe University of Tennessee

    E-Print Network [OSTI]

    Tennessee, University of

    EngineeringMechanical Engineering Nuclear EngineeringNuclear Engineering Biosystems Engineering,develop, and design aircrafts research,develop, and design aircraft and spacecraft components and systems forand associated with propulsion,technologies associated with propulsion, airframe, avionics, aerodynamics, sensors

  3. Assessment Plans College of Engineering

    E-Print Network [OSTI]

    Dyer, Bill

    Engineering UG BS Electrical Engineering Y 2010 Y Y Y Mechanical & Industrial Engr GR MENG Engineering N MS Mechanical Engineering Y 2014 Y Y Y Mechanical and Industrial Engineering UG BS Financial Engineering N Mechanical and Industrial Engineering UG BS Industrial Engineering Y 2011 Y Y Y Mechanical

  4. Stirling engine

    SciTech Connect (OSTI)

    Fujiwara, M.; Kazumoto, Y.; Nomaguchi, T.; Kashiwamura, K.

    1986-11-04T23:59:59.000Z

    This patent describes a Stirling engine wherein a pressure variation is provided by reciprocative movement of a displacer and is utilized by a power piston to obtain an output motive force, which comprises: a pressurized crankcase, an expansion cylinder having a seal carrying wall, a displacer located in the expansion cylinder, a displacer rod connected to the displacer and projecting through the seal and into the crankcase, a first elastic film attached to the displacer rod and to the seal carrying wall so as to produce a first hermetically sealed space, a compression cylinder, a power piston having a power piston rod located in the compression cylinder, a second elastic film attached to the power piston rod and to the compression cylinder so as to produce a second hermetically sealed space below the power piston, the first and the second hermetically sealed spaces being included in a pressurized reactive space, a pressure adjusting means for equalizing the mean pressure within the reactive space and the mean pressure within the crankcase, a heater tube, a regenerator, and a cooler tube are connected to the expansion cylinder, and are included in a working space, as is the expansion cylinder and the compression cylinder, and a first gas having a low viscosity, a low molecular weight and a high thermal conductivity is sealed in the working space and the reactive space, and a second gas having a high viscosity and a high molecular weight is sealed in the crankcase.

  5. The Cosmic Organism Theory

    E-Print Network [OSTI]

    Ding-Yu Chung; Volodymyr Krasnoholovets

    2005-12-05T23:59:59.000Z

    We present the cosmic organism theory in which all visible and invisible matter has different cosmic genetic expressions. The cosmic gene includes codes for the object structure and the space structure. The cosmic digital code for the object structure consists of full object (1, 2, and 3 for particle, string, and membrane, respectively) and empty object (0) as anti de Sitter space (AdS). The tessellation lattice of empty objects is tessellattice. The decomposition of a full object in tessellattice results in the AdS/CFT (conformal field theory) duality. The digital code for the object structure accounts for the AdS/CFT duality, the dS/bulk duality, and gravity. The digital code for the space structure consists of 1 and 0 for attachment space and detachment space, respectively. Attachment space attaches to object permanently at zero speed or reversibly at the speed of light. Detachment space detaches from the object irreversibly at the speed of light. The combination of attachment space and detachment space results in miscible space, binary lattice space or binary partition space. Miscible space represents special relativity. Binary lattice space consists of multiple quantized units of attachment space separated from one another by detachment space. Binary lattice space corresponds to the nilpotent universal computational rewrite system (NUCRS) by Diaz and Rowlands. The gauge force fields and wavefunction are in binary lattice space. With tessellattice and binary lattice space, 11D brane is reducing to 4D particle surrounded by gravity and the gauge force fields. The cosmic dimension varies due to different speeds of light in different dimensional space-times and the increase of mass.

  6. COLUMBIA UNIVERSITY Computer Engineering Program

    E-Print Network [OSTI]

    Yang, Junfeng

    COLUMBIA UNIVERSITY Computer Engineering Program The Fu Foundation School of Engineering Zukowski (caz@columbia.edu) Acting Chair, Computer Engineering Program #12;COLUMBIA UNIVERSITY Computer interdepartmental major within Engineering School #12;COLUMBIA UNIVERSITY Computer Engineering Program The Fu

  7. Engineering n About the Degrees

    E-Print Network [OSTI]

    Delene, David J.

    Petrolium engineering Petroleum engineers hold various positions in the exploration, production Engineering and Petroleum Engineering. All programs are ABET accredited (our new Petroleum Engineering program of fields including biotechnology, consumer products, electronic materials, energy production, food

  8. Patient Care a Genetic Counselor

    E-Print Network [OSTI]

    Berdichevsky, Victor

    are actively involved with teaching and research activities. Because of the many advances in medical genetics professionals who combine their knowledge of basic science, epidemiological principles, medical genetics counselors are employed in many settings such as university medical centers, private hospitals, physician

  9. Biology 2250 Principles of Genetics

    E-Print Network [OSTI]

    Innes, David J.

    ://www.whfreeman.com/mga/ Virtual Fly:http://www.biologylabsonline.com/ Basic Concepts of Genetics (Chapter 1) Nucleus · contains. 5) - Sex linkage (Ch. 5) - Inheritance and probability (Ch.5) - Mendelian genetics in humans Meiosis 2n n Animal egg Polar bodies n n Plant gp = gametophyte n Fungus Cytological Observations 1

  10. Bylaws of the Civil and Environmental Engineering Academy (Revised and Approved April 8, 2006)

    E-Print Network [OSTI]

    Gelfond, Michael

    Bylaws of the Civil and Environmental Engineering Academy (Revised and Approved April 8, 2006) (Name Revised and Approved April 5, 2008) BYLAWS of the CIVIL AND ENVIRONMENTAL ENGINEERING ACADEMY) ARTICLE I ­ NAME The name of this organization shall be the Civil and Environmental Engineering Academy

  11. WORKSHOP ON CONSTRUCTION ENGINEERING

    E-Print Network [OSTI]

    Tommelein, Iris D.

    WORKSHOP ON CONSTRUCTION ENGINEERING BASIC RESEARCH Final Report Robert I. Carr William F. Maloney September, 1982 THE UNIVERSITY OF MICHIGAN DEPARTMENT OF CIVIL ENGINEERING CONSTRUCTION ENGINEERING on Construction Engineering Basic Research Final Report Held at The University of Michigan Ann Arbor, Michigan May

  12. and Chemical Engineering

    E-Print Network [OSTI]

    Prinz, Friedrich B.

    is constructing a new building that will house the Department of Chemical Engineering and the DepartmentBiological and Chemical Engineering Building #12;2 Biological and Chemical Engineering Building sta and Engineering Quad, the new building will be part of a neighborhood of four buildings that house a community

  13. MMEECCHHAANNIICCAALL ENGINEERING PROGRAM

    E-Print Network [OSTI]

    Fernandez, Eduardo

    or EOC 5172 Ocean Engineering Math 1. Students are advised to take this course in the first semesterMMEECCHHAANNIICCAALL ENGINEERING PROGRAM MASTER OF SCIENCE WITH MAJOR IN MECHANICAL ENGINEERING 6930 Control 2. One (1) math course (3 semester credits); either MAP 4306 Engineering Mathematics 2

  14. MMEECCHHAANNIICCAALL ENGINEERING PROGRAM

    E-Print Network [OSTI]

    Fernandez, Eduardo

    Mathematics 2 or EOC 5172 Ocean Engineering Math 1. Students are advised to take this course in the firstMMEECCHHAANNIICCAALL ENGINEERING PROGRAM MASTER OF SCIENCE WITH MAJOR IN MECHANICAL ENGINEERING or EML 6930 Control 2. One (1) mathematics course (3 semester credits); either MAP 4306 Engineering

  15. Mechanical & Biomedical Engineering

    E-Print Network [OSTI]

    Barrash, Warren

    * Engineering Statistics or Probability and Statistics* 3 ME 380 Kinematics & Machine Dynamics 4 ME, CE, or ENGRMechanical & Biomedical Engineering Department BACHELOR OF SCIENCE IN MECHANICAL ENGINEERING COURSE Differential Equations and Matrix Theory 4 ENGR 245 Introduction to Materials Science & Engineering 3 ENGR 210

  16. MATERIALS SCIENCE ENGINEERING

    E-Print Network [OSTI]

    California at Irvine, University of

    MATERIALS SCIENCE AND ENGINEERING GRADUATE MANUAL COLLEGE OF ENGINEERING UNIVERSITY OF CALIFORNIA AT BERKELEY October 23, 2013 #12;Materials Science and Engineering University of California at Berkeley Page 2 Subject Matter · Outcome of the Preliminary Exam #12;Materials Science and Engineering University

  17. SPRING 2007 METRICSMECHANICAL ENGINEERING

    E-Print Network [OSTI]

    Li, Teng

    OF ENGINEERING, UNIVERSITY OF MARYLAND. Department Works Globally to Share Knowledge & Expertise IN THIS ISSUE: 2SPRING 2007 METRICSMECHANICAL ENGINEERING A. JAMES CLARK SCHOOL of ENGINEERING www.enme.umd.edu A NEWSLETTER FOR ALUMNI AND FRIENDS OF THE DEPARTMENT OF MECHANICAL ENGINEERING AT THE A. JAMES CLARK SCHOOL

  18. STUDENT HANDBOOK MECHANICAL ENGINEERING

    E-Print Network [OSTI]

    Krstic, Miroslav

    accredited programs) Aerospace and Mechanical Engineering: · An ability to apply knowledge of mathematics-long learning. · A knowledge of contemporary issues. · An ability to use modern engineering techniques, skills, and computing tools necessary for engineering practice. Additionally: Aerospace Engineering · Knowledge of key

  19. Syracuse University Electrical Engineering

    E-Print Network [OSTI]

    Mather, Patrick T.

    Syracuse University Electrical Engineering and Computer Science Tenure Track Faculty Position in Electrical Engineering The Department of Electrical Engineering and Computer Science is seeking applicants for a tenure track position in Electrical Engineering starting in August 2014 or January 2015. The department

  20. SEATTLE UNIVERSITY ELECTRICAL ENGINEERING

    E-Print Network [OSTI]

    Carter, John

    SEATTLE UNIVERSITY ELECTRICAL ENGINEERING STUDENT HANDBOOK Eighteenth Edition July 2011 Department of Electrical and Computer Engineering Seattle University 901 12th Avenue P.O. Box 222000 Seattle, WA 98122.seattleu.edu The electrical engineering program is accredited by the Engineering Accreditation Commission of ABET, http

  1. UNDERGRADUATE Materials Science & Engineering

    E-Print Network [OSTI]

    Tipple, Brett

    UNDERGRADUATE HANDBOOK Materials Science & Engineering 2013 2014 #12;STUDYING FOR A MATERIALS SCIENCE AND ENGINEERING DEGREE Materials Science and Engineering inter-twines numerous disciplines that still gives the students the opportunity to study science while earning an engineering degree. Materials

  2. Materials Science & Engineering

    E-Print Network [OSTI]

    Simons, Jack

    Materials Science & Engineering The University of Utah 2014-15 Undergraduate Handbook #12;STUDYING FOR A MATERIALS SCIENCE AND ENGINEERING DEGREE Materials Science and Engineering inter-twines numerous disciplines that still gives the students the opportunity to study science while earning an engineering degree. Materials

  3. ENGINEERING HOWARD R. HUGHES

    E-Print Network [OSTI]

    Hemmers, Oliver

    ENGINEERING College of HOWARD R. HUGHES HigHligHts At the Howard R. Hughes College of Engineering is an integral part of engineering studies, we also provide students with a superb technical education and strong of Energy Solar Decathlon 2013. Engineering and architecture students will design then build and operate

  4. ARMOUR COLLEGE OF ENGINEERING

    E-Print Network [OSTI]

    Heller, Barbara

    ARMOUR COLLEGE OF ENGINEERING Strategic Plan Summary #12;Armour College of Engineering Strategic Plan Summary | 1 ARMOUR COLLEGE OF ENGINEERING STRATEGIC PLAN SUMMARY Undergraduate Education At Armour-focused education with a renewed emphasis on the entrepreneurial and ethical practice of engineering. An Armour

  5. ENGINEERING MANAGEMENT AND LEADERSHIP

    E-Print Network [OSTI]

    Eagar, Thomas W.

    ENGINEERING MANAGEMENT AND LEADERSHIP Where did we come from? Where are we going? How do we get · If it works but no one knows why, it's ENGINEERING #12;The scientist explains that which exists; The engineer creates that which never was. Theodore von Karman #12;Engineer - Noun (from French "to contrive

  6. Engineering and Architecture (FEA)

    E-Print Network [OSTI]

    Faculty of Engineering and Architecture (FEA) #12;362 Faculty of Engineering and Architecture (FEA) Undergraduate Catalogue 2014­15 Faculty of Engineering and Architecture (FEA) Officers of the Faculty Peter F as 1913 the University recognized the need for engineering education and training in the Middle East

  7. Engineering and Mineral Resources

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    News ????????????????? ® College of Engineering and Mineral Resources Winter 2008 table of contents. . . . . . . . . . . . . . . . . . . . 7 wvCROSSROADS DepartmentofCivilandEnvironmentalEngineering Civil engineering exchange program and environmental engineering with a focus in transportation will have the opportunity to study abroad as part

  8. Biomedical Engineering Student Enrollment

    E-Print Network [OSTI]

    Chemical and Biological Engineering 211 229 209 228 208 Degrees Awarded 2007-08 2008-09 2009-10 2010-11 2011-12 2012-13 Bioresource and Agricultural Engineering Chemical and Biological Engineering 23 24 28Biomedical Engineering Student Enrollment Spring 2010 Spring 2011 Spring 2012 Spring 2013 Spring

  9. Biomolecular Engineering Zengyi Shao

    E-Print Network [OSTI]

    Zhao, Huimin

    Biomolecular Engineering Zengyi Shao Ee Lui Ang Huimin Zhao Department of Chemical and Biomolecular Engineering, University of Illinois, Urbana, Illinois, U.S.A. INTRODUCTION Biomolecular engineering is an emerging field of academic research and industrial practice having the goal of engineering value

  10. Introduction to Software Engineering

    E-Print Network [OSTI]

    ? ) Concept of Operations (CONOPS) Software Requirements Requirements Engineering Processes System Models

  11. SOFTWARE ENGINEERING COMPUTER SCIENCE

    E-Print Network [OSTI]

    Bone, Gary

    SOFTWARE ENGINEERING COMPUTER SCIENCE ... What's the Difference? goeng1@mcmaster.ca www). Software Engineering covers the course content listed under Computer Science, with some additions. Software). Software Engineering students will graduate with a Bachelor of Engineering (B.Eng). Computer Science

  12. Mechanical and Aerospace Engineering

    E-Print Network [OSTI]

    Mechanical and Aerospace Engineering Abstract Solid materials used in energy conversion and storage Department of Civil & Environmental Engineering, Department of Mechanical Engineering, Northwestern University April 6, 2012 at 2:00pm in SCOB 252 School for Engineering of Matter, Transport & Energy #12;

  13. COLLEGE OF ENGINEERING Infrastructure

    E-Print Network [OSTI]

    solar energy (8). ME Ketul Popat and John Williams in the Department of Mechanical EngineeringCOLLEGE OF ENGINEERING Infrastructure #12;2 COLLEGE OF ENGINEERING This publication focuses on just a few of the incredible College of Engineering faculty and students who are conducting research related

  14. Mechanical & Aerospace Engineering

    E-Print Network [OSTI]

    in Mechanical Engineering at the School for Engineering of Matter, Transport and Energy, working in Dr. MarcusMechanical & Aerospace Engineering The atomization of a liquid jet by a high speed cross.S.E. degree in mechanical engineering from Amirkabir University of Technology in 2006 and M.S. degree

  15. TO TRANSFORM BIOMEDICAL ENGINEERING

    E-Print Network [OSTI]

    IT'S TIME TO TRANSFORM BIOMEDICAL ENGINEERING EDUCATION #12;Charles H. & Bettye Barclay Professor Head, Department of Biomedical Engineering Texas A&M University We're dedicated to solving the world in biomedical engineering research and education ­ and we're well on our way. Our faculty continues to engineer

  16. Iowa State University Engineering

    E-Print Network [OSTI]

    Lin, Zhiqun

    1 Iowa State University Engineering Student Clubs Engineering Student CouncilIowa State University #12;2 AirISU Pg. 4 Alpha Pi Mu Industrial Engineering Honor Society (APM) Pg. 4 American Institute of Aeronautics and Astronautics (AIAA) Pg. 5 American Society of Agricultural and Biological Engineers (ASABE) Pg

  17. A Hybrid, Neuro-Genetic Approach to Hydraulic Fracture Treatment Design and Optimization

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    SPE 36602 A Hybrid, Neuro-Genetic Approach to Hydraulic Fracture Treatment Design and Optimization and novel methodology for optimal design of hydraulic fracture treatments in a gas storage field. What makes very little (almost none) reservoir data availability. Lack of engineering data for hydraulic fracture

  18. Photo-inducible cell ablation in Caenorhabditis elegans using the genetically encoded singlet

    E-Print Network [OSTI]

    Tsien, Roger Y.

    oxygen generating protein miniSOG Yingchuan B. Qia,1 , Emma J. Garrena , Xiaokun Shub,c , Roger Y. Tsienc-inducible and tissue-selective cell ablation using a genetically encoded photosensitizer, miniSOG (mini singlet oxygen generator). miniSOG is a newly engineered fluo- rescent protein of 106 amino acids that generates singlet

  19. Improved computer models support genetics research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Simple computer models unravel genetic stress reactions in cells Simple computer models unravel genetic stress reactions in cells Integrated biological and computational methods...

  20. Effect of Hydrophobic Primary Organic Aerosols on Secondary Organic...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hydrophobic Primary Organic Aerosols on Secondary Organic Aerosol Formation from Ozonolysis of ?-Pinene. Effect of Hydrophobic Primary Organic Aerosols on Secondary Organic...

  1. Tumor Engineering: The Other Face of Tissue Engineering

    E-Print Network [OSTI]

    Ghajar, Cyrus M

    2010-01-01T23:59:59.000Z

    Vacanti, J.P. Tissue engineering. Science 260, 920, 1993. 2.dynamic reciprocity: engineering three-dimensional cultureRonnov-Jessen, L. TUMOR ENGINEERING: OTHER FACE OF TISSUE

  2. NREL: Systems Engineering - 2015 Wind Energy Systems Engineering...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research Systems Engineering Printable Version 2015 Wind Energy Systems Engineering Workshop The third NREL Wind Energy Systems Engineering Workshop took place on the 14th and 15th...

  3. Stromswold, Evolution & Genetics of Language 1 Genetics and the Evolution of Language: What genetic studies reveal about the evolution

    E-Print Network [OSTI]

    Stromswold, Karin

    Stromswold, Evolution & Genetics of Language 1 Genetics and the Evolution of Language: What genetic studies reveal about the evolution of language Karin Stromswold Rutgers University ­ New Brunswick Abstract. In this paper I argue that genetic studies of language provide insights about the evolution

  4. COLLEGE OF ENGINEERING & COMPUTER SCIENCE

    E-Print Network [OSTI]

    Wu, Shin-Tson

    and Computer Engineering Industrial Engineering and Management Systems Materials Science and Engineering.S. Environmental Engineering, B.S., M.S., Ph.D. Industrial Engineering, B.S., M.S., Ph.D. Information Technology, B2013-14 COLLEGE OF ENGINEERING & COMPUTER SCIENCE FAST FACTS UNIVERSITY OF CENTRAL FLORIDA ORLANDO

  5. 07SCHOOL OF MECHANICAL ENGINEERING

    E-Print Network [OSTI]

    Dimitrova, Vania

    07SCHOOL OF MECHANICAL ENGINEERING UNDERGRADUATE DEGREES School of Mechanical Engineering FACULTY OF ENGINEERING Undergraduate Degrees 2015 #12;www.engineering.leeds.ac.uk/mechanical UNDERGRADUATE DEGREES SCHOOL OF MECHANICAL ENGINEERING The School of Mechanical Engineering offers both a broad mechanical engineering degree

  6. Organic Photovoltaics Philip Schulz

    E-Print Network [OSTI]

    Firestone, Jeremy

    Field Effect Transistors Organic Light Emitting Diodes Organic Solar Cells .OFET, OTFT .RF-ID tag 1977 ­ Conductivity in polymers 1986 ­ First heterojunction OPV 1987 ­ First organic light emitting diode (OLED) 1993 ­ First OPV from solution processing 2001 ­ First certified organic solar cell with 2

  7. Departmental Organization and Management

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1993-06-10T23:59:59.000Z

    Effective immediately, the Departmental organization structure reflected in the chart at Attachment 1 has been approved.

  8. Production of extracellular nucleic acids by genetically altered bacteria in aquatic-environment microcosms

    SciTech Connect (OSTI)

    Paul, J.H.; David, A.W.

    1989-01-01T23:59:59.000Z

    Factors which affect the production of extracellular DNA by genetically altered strains of Escherichia coli, Pseudomonas aeruginosa, Pseudomonas cepacia, and Bradyrhizobium japonicum in aquatic environments were investigated. The presence or absence of the ambient microbial community had little effect on the production of extracellular DNA. Results indicate the extracellular-DNA production by genetically altered bacteria released into aquatic environments is more strongly influenced by physiochemical factors than biotic factors; extracellular-DNA production rates are usually greater for organisms released in freshwater than marine environments; and ambient microbial populations can readily utilize materials released by these organisms.

  9. SCALING-UP OF NEW GENERATION OF 3D FLEXIBLE ORGANIC SOLAR CELLS

    E-Print Network [OSTI]

    Kassegne, Samuel Kinde

    SCALING-UP OF NEW GENERATION OF 3D FLEXIBLE ORGANIC SOLAR CELLS _______________ A Thesis Presented Generation of 3D Flexible Organic Solar Cell _____________________________________________ Samuel Kinde Engineering San Diego State University, 2012 Scaling-up of New Generation of 3D Flexible Organic Solar Cells

  10. Thrust Area Report, Engineering Research, Development and Technology

    SciTech Connect (OSTI)

    Langland, R. T.

    1997-02-01T23:59:59.000Z

    The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the knowledge base, process technologies, specialized equipment, tools and facilities to support current and future LLNL programs. Engineering`s efforts are guided by a strategy that results in dual benefit: first, in support of Department of Energy missions, such as national security through nuclear deterrence; and second, in enhancing the nation`s economic competitiveness through our collaboration with U.S. industry in pursuit of the most cost- effective engineering solutions to LLNL programs. To accomplish this mission, the Engineering Research, Development, and Technology Program has two important goals: (1) identify key technologies relevant to LLNL programs where we can establish unique competencies, and (2) conduct high-quality research and development to enhance our capabilities and establish ourselves as the world leaders in these technologies. To focus Engineering`s efforts technology {ital thrust areas} are identified and technical leaders are selected for each area. The thrust areas are comprised of integrated engineering activities, staffed by personnel from the nine electronics and mechanical engineering divisions, and from other LLNL organizations. This annual report, organized by thrust area, describes Engineering`s activities for fiscal year 1996. The report provides timely summaries of objectives, methods, and key results from eight thrust areas: Computational Electronics and Electromagnetics; Computational Mechanics; Microtechnology; Manufacturing Technology; Materials Science and Engineering; Power Conversion Technologies; Nondestructive Evaluation; and Information Engineering. Readers desiring more information are encouraged to contact the individual thrust area leaders or authors. 198 refs., 206 figs., 16 tabs.

  11. The Phillips Stirling engine

    SciTech Connect (OSTI)

    Hargreaves, C.M.

    1991-01-01T23:59:59.000Z

    This book is about the Stirling engine and its development from the heavy cast-iron machine of the 19th century to that of today. It is a history of a research effort spanning nearly 50 years, together with an outline of principles, and some technical details and descriptions of the more important engines. Contents include: the hot-air engine; the 20th-century revival; the Stirling cycle; rhombic-drive engines; heating and cooling; pistons and seals; electric generators and heat pumps; exotic heat sources; the engine and the environment; swashplate engines; and the past and the future.

  12. ENGINEERING GRaduatE PRoGRams Biological SyStemS engineering Biomedical engineering chemical engineering civil and environmental engineering

    E-Print Network [OSTI]

    California at Davis, University of

    ENGINEERING GRaduatE PRoGRams Biological SyStemS engineering § Biomedical engineering § chemical engineering § civil and environmental engineering computer Science § electrical and computer engineering § materialS Science and engineering mechanical and aeronautical engineering § tranSportation technology

  13. QESST Engineering Research Center: Revolutionizing

    E-Print Network [OSTI]

    Zhang, Junshan

    QESST Engineering Research Center: Revolutionizing energy for the world Power Systems Energy engineering and the built environment school of electrical, computer and energy engineering biofuels waste

  14. Systems Engineering Handbook Foreword ................................ ................................ ................................ ............................ ix

    E-Print Network [OSTI]

    Rhoads, James

    NASA Systems Engineering Handbook SP-610S June 1995 #12;Contents Foreword ................................ ................................ ................................ .... 1 Fundamentals of System Engineering ................................ ............................ 3 Definition of Systems Engineering

  15. HCCI engine control and optimization

    E-Print Network [OSTI]

    Killingsworth, Nicholas J.

    2007-01-01T23:59:59.000Z

    102 xiv LIST OF TABLES Table 1.1: Internal Combustion Engine33] J. B. Heywood. Internal Combustion Engine Fundamentals.phenomena in internal combustion engines and rapid

  16. HCCI engine control and optimization

    E-Print Network [OSTI]

    Killingsworth, Nicholas J.

    2007-01-01T23:59:59.000Z

    Internal Combustion Engine Comparison Engine E?ciency Emissionsinternal combustion engine technology exists that has the potential to substantially improve e?ciency and reduce vehicle emissions,

  17. pEtrolEuM EnginEEring College of Engineering and Mines

    E-Print Network [OSTI]

    Hartman, Chris

    pEtrolEuM EnginEEring College of Engineering and Mines Department of Petroleum Engineering 907 engineering offers a unique look at the challenging problems confronting the petroleum industry. This program and engineering science. Courses in petroleum engineering deal with drilling, formation evaluation, production

  18. CollegeofEngineering College of Engineering

    E-Print Network [OSTI]

    Illinois at Chicago, University of

    the following program requirements: Master of Science Baccalaureate Field· Physical sciences, engineering sciences, engineering, computer science, mathematics, biology, or medi- cine. Students from other areas, computer science, mathematics, biology, or medi- cine. Students from other areas are also encouraged

  19. INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering

    E-Print Network [OSTI]

    Rohs, Remo

    78 INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering and business principles companies compete in today's global marketplace. The Industrial and Systems engineer's task is to take of industries including consulting, technology development, software, supply chain manufacturing, engineering

  20. College of Engineering | Mechanical and Industrial Engineering Department

    E-Print Network [OSTI]

    Mountziaris, T. J.

    College of Engineering | Mechanical and Industrial Engineering Department Are you up for a challenge? In the Mechanical and Industrial Engineering Innovation Shop at UMass Amherst, we challenge, instruments, and computers to support mechanical and industrial engineering projects ­ including all

  1. Transportation Engineering Graduate Programs Department of Civil & Environmental Engineering

    E-Print Network [OSTI]

    Bertini, Robert L.

    Transportation Engineering Graduate Programs Department of Civil & Environmental Engineering Maseeh College of Engineering & Computer Science STUDY TRANSPORTATION ENGINEERING AT Portland, Oregon is famous for its multimodal transportation system. Why not come to Portland State University and study

  2. Systems Engineering Integrating Project Management, Science, Engineering, and

    E-Print Network [OSTI]

    Mojzsis, Stephen J.

    Systems Engineering Integrating Project Management, Science, Engineering, and Mission Operations Systems Engineering Experience LASP is a full-cycle space institute, combining all aspects of space exploration through our expertise in science, engineering, mission operations, data analysis, and education

  3. Systems Engineering Integrating Project Management, Science, Engineering, and

    E-Print Network [OSTI]

    Mojzsis, Stephen J.

    Systems Engineering Integrating Project Management, Science, Engineering, and Mission Operations Systems Engineering Experience LASP is a full-cycle space research institute, combining all aspects of space exploration through our expertise in science, engineering, mission operations, data analysis

  4. Organe und Gremien Organe der Stiftung

    E-Print Network [OSTI]

    , Batavia IL (USA) Prof. Dr. F. Krausz BESSY GmbH, Berlin Prof. Dr. B. Naroska Universität Hamburg Prof. Dr. F. Pauss European Organization for Particle Physics CERN, Geneva (CH) Dr. N. Roe Lawrence Berkeley Organization for Particle Physics CERN, Geneva (CH) Dr. A. Wrulich Paul Scherrer Institut, Villigen (CH) 14 #12

  5. Organe und Gremien Organe der Stiftung

    E-Print Network [OSTI]

    Medizinische Forschung, Heidelberg Prof. Dr. E. Jaeschke BESSY GmbH, Berlin Prof. Dr. W. Jentschke Institut für Experimentalphysik, Universität Hamburg (Ehrenmitglied) Dr. K.-H. Kissler European Organization for Particle Physics Organization for Particle Physics CERN, Geneva (CH) Prof. Dr. W. Sandner Max-Born-Institut, Berlin Dr. M

  6. Organe und Gremien Organe der Stiftung

    E-Print Network [OSTI]

    Kassel Prof. Dr. S. Großmann Fachbereich Physik, Universität Marburg Prof. Dr. E. Jaeschke BESSY Gmb Organization for Particle Physics CERN, Genf (CH) Prof. Dr. V. Metag Gesellschaft für Schwerionenforschung GSI, Darmstadt Dr. D. Möhl European Organization for Particle Physics CERN, Genf (CH) Prof. Dr. J. Stachel

  7. Organe und Gremien Organe der Stiftung

    E-Print Network [OSTI]

    BESSY GmbH, Berlin Prof. Dr. W. Jentschke II. Institut für Experimentalphysik, Universität Hamburg (Ehrenmitglied) Dr. K.-H. Kissler European Organization for Particle Physics CERN, Geneva (CH) Prof. Dr. K. Königsmann Albert-Ludwigs-Universität Freiburg Dr. J. May European Organization for Particle Physics CERN

  8. 50 KW Stirling engine

    SciTech Connect (OSTI)

    Ishizaki, Y.; Haramura; Kondoh, T.; Yamaguchi, K.; Yamaguchi, S.

    1982-08-01T23:59:59.000Z

    This paper presents an outline of the 50KW Stirling engine (4-189D.A.), called ''MT79'', as well as of its performance which was built by AISIN in 1980. The engine features a newly developed swash plate mechanism with floating plates. The engine, which uses Helium, has been successfully tested for over 1,000 hours, demonstrating a maximum horsepower of 52KW (71PS) /2,500rpm, maximum efficiency of 31% /700rpm, and maximum torque of 30kgf-m /500rpm. The performance of the engine is presented with these experimental results: Engine power, Torque, and Efficiency vs. Revolution; Heat balance; P-V diagram of expansion space and compression space; Noise level. The engine demonstrates the characteristics of a higher torque and a higher efficiency at lower speeds, and with low noise. Therefore, it was found that in a specific area, the engine shows characteristics surpassing those found in internal combustion engines.

  9. Computer Science & Engineering

    E-Print Network [OSTI]

    Weiblen, George D

    Computer Science & Engineering at the University of Minnesota Yearsof excellence 40 Department the department head history of the computer science & engineering department Timeline Faculty Awards Software & project highlights Architectures & Compilers Bioinformatics & Computational Biology Data Mining, Databases

  10. Environmental Engineering GRADUATE STUDIES

    E-Print Network [OSTI]

    Wang, Yuhang

    . The principal focus areas include: environmental biotechnology; water quality and treatment; wastewaterEnvironmental Engineering GRADUATE STUDIES ENVIRONMENTAL ENGINEERING (EnvE) at Georgia Tech quality monitoring, pollution control and model- ing; environmental sciences; and industrial ecology

  11. Engine lubrication oil aeration

    E-Print Network [OSTI]

    Baran, Bridget A. (Bridget Anne)

    2007-01-01T23:59:59.000Z

    The lubrication system of an internal combustion engine serves many purposes. It lubricates moving parts, cools the engine, removes impurities, supports loads, and minimizes friction. The entrapment of air in the lubricating ...

  12. Reuse in Systems Engineering

    E-Print Network [OSTI]

    Wang, Gan

    Reuse in systems engineering is a frequent but poorly understood phenomenon. Nevertheless, it has a significant impact on system development and on estimating the appropriate amount of systems engineering effort with models ...

  13. Broadening Participation in Engineering

    E-Print Network [OSTI]

    Tilbury, Dawn

    NSF Mission To promote the progress of science; to advance the national health, prosperity;5 Renewable Energy Technologies Solar Photovoltaic Power & Fuels Biomass Conversion, Biofuels & Bio Advance health informatics Engineer better medicines Reverse-engineer the brain Prevent nuclear terror

  14. Engineering Industrial & Systems

    E-Print Network [OSTI]

    Berdichevsky, Victor

    powerful tool sets used in industry today. -Brent Gillett, BSIE 2007 Advanced Planning Engineer at BMW I the skills necessary to be successful in today's global environment. EDGE exposes and trains engineering

  15. Proceedings of the 25th intersociety energy conversion engineering conference

    SciTech Connect (OSTI)

    Nelson, P.A.; Schertz, W.W.; Till, R.H.

    1990-01-01T23:59:59.000Z

    This book contains the proceedings of the 25th Intersociety Energy Conversion Engineering Conference. Volume 5 is organized under the following headings: Photovoltaics I, Photovoltaics II, Geothermal power, Thermochemical conversion of biomass, Energy from waste and biomass, Solar thermal systems for environmental applications, Solar thermal low temperature systems and components, Solar thermal high temperature systems and components, Wind systems, Space power sterling technology Stirling cooler developments, Stirling solar terrestrial I, Stirling solar terrestrial II, Stirling engine generator sets, Stirling models and simulations, Stirling engine analysis, Stirling models and simulations, Stirling engine analysis, Stirling engine loss understanding, Novel engine concepts, Coal conversion and utilization, Power cycles, MHD water propulsion I, Underwater vehicle powerplants - performance, MHD underwater propulsion II, Nuclear power, Update of advanced nuclear power reactor concepts.

  16. GRADUATE STUDENT HANDBOOK College of Engineering

    E-Print Network [OSTI]

    Dyer, Bill

    and Computer Engineering, Mechanical Engineering, Industrial Engineering, Applied Mechanics, or Environmental.S. Environmental Engineering, M.S. Industrial & Management Engineering, M.S. Mechanical Engineering, M.S. Master Mechanical & Industrial Engineering Mechanical & Ind

  17. Advanced Natural Gas Reciprocating Engine(s)

    SciTech Connect (OSTI)

    Pike, Edward

    2014-03-31T23:59:59.000Z

    The objective of the Cummins ARES program, in partnership with the US Department of Energy (DOE), is to develop advanced natural gas engine technologies that increase engine system efficiency at lower emissions levels while attaining lower cost of ownership. The goals of the project are to demonstrate engine system achieving 50% Brake Thermal Efficiency (BTE) in three phases, 44%, 47% and 50% (starting baseline efficiency at 36% BTE) and 0.1 g/bhp-hr NOx system out emissions (starting baseline NOx emissions at 2 – 4 g/bhp-hr NOx). Primary path towards above goals include high Brake Mean Effective Pressure (BMEP), improved closed cycle efficiency, increased air handling efficiency and optimized engine subsystems. Cummins has successfully demonstrated each of the phases of this program. All targets have been achieved through application of a combined set of advanced base engine technologies and Waste Heat Recovery from Charge Air and Exhaust streams, optimized and validated on the demonstration engine and other large engines. The following architectures were selected for each Phase: Phase 1: Lean Burn Spark Ignited (SI) Key Technologies: High Efficiency Turbocharging, Higher Efficiency Combustion System. In production on the 60/91L engines. Over 500MW of ARES Phase 1 technology has been sold. Phase 2: Lean Burn Technology with Exhaust Waste Heat Recovery (WHR) System Key Technologies: Advanced Ignition System, Combustion Improvement, Integrated Waste Heat Recovery System. Base engine technologies intended for production within 2 to 3 years Phase 3: Lean Burn Technology with Exhaust and Charge Air Waste Heat Recovery System Key Technologies: Lower Friction, New Cylinder Head Designs, Improved Integrated Waste Heat Recovery System. Intended for production within 5 to 6 years Cummins is committed to the launch of next generation of large advanced NG engines based on ARES technology to be commercialized worldwide.

  18. Supercomputing | Computational Engineering | ORNL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Computing Computer Science Data Earth Sciences Energy Science Future Technology Knowledge Discovery Materials Mathematics National Security Systems Modeling Engineering...

  19. Naval Civil Engineering Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Naval Civil Engineering Laboratory Personnel from the Power Systems Department have participated in numerous distribution equipment research, development, demonstration, testing,...

  20. MECHANICAL ENGINEERING UNDERGRADUATE MAJOR

    E-Print Network [OSTI]

    Tau Beta Pi engineers design systems, which convert energy into useful work. Using the laws of nature, along

  1. SCHOOL OF ENGINEERING www.abdn.ac.uk/engineering

    E-Print Network [OSTI]

    Levi, Ran

    , in the planning and commissioning of equipment, and in site and plant supervision. Engineers require a wide rangeSCHOOL OF ENGINEERING www.abdn.ac.uk/engineering POSTGRADUATE GUIDE #12;MSc Renewable Energy MSc Safety Engineering for Oil & Gas MSc Subsea Engineering MSc Oil & Gas Engineering MSc Project Management

  2. Knowledge Engineering for non-Engineers Tatiana Gavrilova

    E-Print Network [OSTI]

    Boyer, Edmond

    Knowledge Engineering for non-Engineers Tatiana Gavrilova Graduate School of Management - Saint be interesting for the knowledge engineering research and practicising community. KEYWORDS: knowledge engineering-233" DOI : 10.1007/978-3-642-16327-2_28 #12;2 Knowledge Engineering for non-Engineers is one

  3. Faculty of Engineering & Design BEng(Hons) Electrical Power Engineering

    E-Print Network [OSTI]

    Burton, Geoffrey R.

    Faculty of Engineering & Design BEng(Hons) Electrical Power Engineering BEng(Hons) Electrical & Electronic Engineering Faculty of Engineering & Design #12;BEng(Hons) Electrical Power Engineering BEng(Hons) Electrical and Electronic Engineering NCEPU and the University of Bath, UK 2 Introduction This elite 2

  4. EnginEEring www.ece.pdx.edu

    E-Print Network [OSTI]

    Bertini, Robert L.

    ElEctrical EnginEEring www.ece.pdx.edu Undergraduate Degrees Offered: Bachelor of Science in Electrical Engineering Graduate Degrees Offered: Master of Science in Electrical and Computer Engineering Doctor of Philosophy in Electrical and Computer Engineering Master of Engineering in Electrical

  5. Mechanical Engineering 1 Faculty of engineering, Department of

    E-Print Network [OSTI]

    Mechanical Engineering 1 Faculty of engineering, Department of --Mechanical Engineering;2 Undergraduate syllabuses Mechanical Engineering The Mechanical Engineering Department of Imperial College London is widely rated as the best in the UK. The Mechanical Engineering building is situated on Exhibition Road

  6. College of Engineering Department of Civil & Environmental Engineering

    E-Print Network [OSTI]

    College of Engineering Department of Civil & Environmental Engineering Major in Civil Engineering, Civil Engineering Concentration Effective 2/25/2014 Departmental Electives for the Major in Civil Engineering, Civil Engineering Concentration Course Title Credits Science Tech Electives GEOL120, or 122

  7. Mixed crystal organic scintillators

    DOE Patents [OSTI]

    Zaitseva, Natalia P; Carman, M Leslie; Glenn, Andrew M; Hamel, Sebastien; Hatarik, Robert; Payne, Stephen A; Stoeffl, Wolfgang

    2014-09-16T23:59:59.000Z

    A mixed organic crystal according to one embodiment includes a single mixed crystal having two compounds with different bandgap energies, the organic crystal having a physical property of exhibiting a signal response signature for neutrons from a radioactive source, wherein the signal response signature does not include a significantly-delayed luminescence characteristic of neutrons interacting with the organic crystal relative to a luminescence characteristic of gamma rays interacting with the organic crystal. According to one embodiment, an organic crystal includes bibenzyl and stilbene or a stilbene derivative, the organic crystal having a physical property of exhibiting a signal response signature for neutrons from a radioactive source.

  8. Mechanical & Aerospace Engineering

    E-Print Network [OSTI]

    and natural gas engines and related components, with sales exceeding $18 billion. Charlton started his career and natural gas engine technologies - for Ford Motor Company, British Gas, Lloyds of London among others of internal combustion engine technology. (cont'd.) (bio cont'd.) At Cummins he was directly involved

  9. Ocean Engineering Development Team

    E-Print Network [OSTI]

    Wood, Stephen L.

    Ocean Engineering Hydrofoil Development Team Justin Eickmeier Mirela Dalanaj Jason Gray Matt test bed for future hydrofoil designs. 5) To create future student interest in the Ocean Engineering Efficiency and Acceleration. #12;Design Team Justin Eickmeier Team Leader Major: Ocean Engineering, Junior

  10. Mechanical engineering Department Seminar

    E-Print Network [OSTI]

    Mechanical engineering Department Seminar Wynter J. Duncanson Department of Aerospace and Ocean Engineering Virginia Tech Smart' Bubbles for Acoustic Contrast in Oil Reservoirs 11:00 AM Friday, 19 April engineering from Boston University. Her doctoral research was devoted to designing surface architectures

  11. Computer Engineering Curriculum Notes

    E-Print Network [OSTI]

    Mather, Patrick T.

    1 Computer Engineering Curriculum Notes 2013-2014 Technical Electives Students fulfill 15 credits be assigned to either group A or group B as determined by Computer Engineering program committee. Every year the computer engineering program committee will review the list and may make change(s). Group A (at least 6

  12. Materials & Engineering Sciences Center

    E-Print Network [OSTI]

    Atoms to Continuum Sandia: 40 years of Hydrogen Science and EngineeringSandia: 40 years of Hydrogen Microsensors CombustionEngineering Science Hydrogen: the renewable energy carrier for the 21st Century for complex hydrides (engineering properties, safety, contaminations....) Other Hydrogen Storage Concepts

  13. MATERIALS SCIENCE AND ENGINEERING

    E-Print Network [OSTI]

    Knobloch,Jürgen

    MATERIALS SCIENCE AND ENGINEERING BACHELOR OF SCIENCE MASTER OF SCIENCE Get your own impression. Materials Science and Engineering in Ilmenau stands for: + a broad and practical university education Catòlica del Peru (PUCP) in Lima/Peru and to receive a double degree in Materials Science and Engineering

  14. CIVIL ENGINEERING GRADUATE HANDBOOK

    E-Print Network [OSTI]

    Farritor, Shane

    CIVIL ENGINEERING GRADUATE HANDBOOK Refer to the most recent version of this handbook. You can get of Civil Engineering University of Nebraska-Lincoln N104 SEC Lincoln, NE 68588-6105 (402) 472-2371 engineering.unl.edu/civil Last updated 25 July 2014 #12;i TABLE OF CONTENTS Table of Contents

  15. ELECTRICAL & COMPUTER ENGINEERING

    E-Print Network [OSTI]

    ELECTRICAL & COMPUTER ENGINEERING SEMINAR "Restoration of Soft X-Ray Laser Images of Nanostructures of Electronic Systems and Information Processing, University of Zagreb, Faculty of Electrical Engineering and Computing. In 1999, he received his Ph.D. in Electrical Engineering from the University of Zagreb. His

  16. ELECTRICAL & COMPUTER ENGINEERING

    E-Print Network [OSTI]

    ELECTRICAL & COMPUTER ENGINEERING SEMINAR "A Random Walk on Image Patches" by Prof. Francois Meyer Electrical, Computer, and Energy Engineering University of Colorado--Boulder Monday, April 2, 2012, 11:00 a a Ph.D. degree in electrical engineering from INRIA, France, in 1993. Meyer worked on the thermonuclear

  17. ELECTRICAL & COMPUTER ENGINEERING

    E-Print Network [OSTI]

    ELECTRICAL & COMPUTER ENGINEERING SEMINAR "Agile Sensing Systems: Analysis, Design and Implementation" by Prof. Jun (Jason) Zhang Electrical and Computer Engineering University of Denver Tuesday of Electrical and Computer Engineering at the University of Denver. He was with the School of Electrical

  18. Electronics, Electrical Engineering

    E-Print Network [OSTI]

    SCHOOL OF Electronics, Electrical Engineering and Computer Science IS IN YOUR HANDS THE FUTURE #12;SCHOOL OF Electronics, Electrical Engineering and Computer Science2 CAREERS IN ELECTRONICS, ELECTRICAL Belfast. Ranked among the top 100 in the world for Electrical and Electronic Engineering (QS World

  19. ELECTRICAL & COMPUTER ENGINEERING

    E-Print Network [OSTI]

    ELECTRICAL & COMPUTER ENGINEERING SEMINAR "Geometry as a Prior in Signal Processing" by Yuejie Chi Electrical Engineering Princeton University Monday, March 19, 2012, 11:00 a.m. Location LSC 210 Abstract processing. Biography: Yuejie Chi is a Ph.D. candidate in Electrical Engineering at Princeton University

  20. ELECTRICAL & COMPUTER ENGINEERING

    E-Print Network [OSTI]

    ELECTRICAL & COMPUTER ENGINEERING SEMINAR "Considerations for Curriculum Planning and Revitalization in Engineering" by Prof. Michael A. de Miranda School of Education and Department of Electrical and Computer Engineering Colorado State University Monday, Feb. 20, 2012, 11:00 a.m. Location: LSC 210 Abstract

  1. Electrical Engineering UNDERGRADUATE

    E-Print Network [OSTI]

    Suzuki, Masatsugu

    447 Electrical Engineering UNDERGRADUATE PROGRAMS The bachelor of science program in electrical advising office. Requirements for BS Degree in Electrical Engineering To receive the BS degree in electrical engineer- ing, students must complete a minimum of 65 credit hours in the upper-division program

  2. ELECTRICAL & COMPUTER ENGINEERING

    E-Print Network [OSTI]

    ELECTRICAL & COMPUTER ENGINEERING SEMINAR "Towards Numerical Growth Model for Laser Damage is a senior member of IEEE (the Institute of Electrical and Electronics Engineers), member of SPIE is appointed as the Director of Graduate Institute of Engineering, that spearheads the development

  3. Water Basins Civil Engineering

    E-Print Network [OSTI]

    Provancher, William

    Water Basins Civil Engineering Objective · Connect the study of water, water cycle, and ecosystems with engineering · Discuss how human impacts can effect our water basins, and how engineers lessen these impacts: · The basic concepts of water basins are why they are important · To use a topographic map · To delineate

  4. Mechanical & Industrial Engineering

    E-Print Network [OSTI]

    Mountziaris, T. J.

    Mechanical & Industrial Engineering Mario A. Rotea Professor and Department Head #12;2Mechanical & Industrial Engineering Outline · Undergraduate Degree Programs · Graduate Degree Programs · The Faculty · The Research · Summary #12;3Mechanical & Industrial Engineering Undergraduate Programs ­ BSME & BSIE 0 20 40 60

  5. Graduate Studies Environmental Engineering

    E-Print Network [OSTI]

    Jacobs, Laurence J.

    ) in SEB provides advanced capabilities in environmental modeling and exposure assessment. www.ce.gatech.eduGraduate Studies Environmental Engineering ENVIRONMENTAL ENGINEERING (EnvE) The Georgia Institute and engineering. The principal focus areas include: environmental biotechnology; water quality and treatment

  6. Mechanical & Aerospace Engineering

    E-Print Network [OSTI]

    Mechanical & Aerospace Engineering An experimental methodology is presented for mechanism Yang is a second graduate student in the department of mechanical engineering of ASU. He received his Jian Yang School for Engineering of Matter, Transport and Energy Arizona State University October 5

  7. Mechanical engineering Department Seminar

    E-Print Network [OSTI]

    efficient energy systems. Evelyn N. Wang is an Associate Professor in the Mechanical Engineering DepartmentMechanical engineering Department Seminar Evelyn Wang Depaprtment of Mechanical Engineering MIT Nanoengineered Surfaces: Transport Phenomena and Energy Applications 11:00 AM Friday, 5 April 2013 Room 245, 110

  8. Mechanical engineering Department Seminar

    E-Print Network [OSTI]

    Mechanical engineering Department Seminar Domitilla Del Vecchio Department of Mechanical. A near future is envisioned in which re- engineered bacteria will turn waste into energy and kill cancer, she joined the Department of Mechanical Engineering and the Laboratory for Information and Decision

  9. Mechanical & Aerospace Engineering

    E-Print Network [OSTI]

    Mechanical & Aerospace Engineering The development of high-energy storage devices has been one energy capacity over 500 cycles. Teng Ma received his BS degree in Thermal and Power Engineering from Xi and Technology of China in 2009. He is currently a Ph.D. candidate in Mechanical Engineering at School

  10. Black Pine Engineering

    Broader source: Energy.gov [DOE]

    Black Pine Engineering is commercializing a disruptive technology in the turbomachinery industry. Using a patented woven composite construction, Black Pine Engineering can make turbomachines (turbines, compressors) that are cheaper and lighter than competing technologies. Using this technology, Black Pine Engineering will sell turbo-compressors which solve the problem of wasted steam in geothermal power plants.

  11. Department of Chemical Engineering

    E-Print Network [OSTI]

    Acton, Scott

    Developing Leaders of Innovation Department of Chemical Engineering #12;At the University of Virginia, we educate students in traditional and nontraditional areas of chemical engineering, giving them.Va. Department of Chemical Engineering benefit from a modern academic curriculum and state

  12. ENGINEERING General Information 436

    E-Print Network [OSTI]

    Garfunkel, Eric

    to advanced study in any field of science or engineering; (2) nontechnical courses that, with the basic the basic scientific principles are applied to problems in a particular engineering field. Throughout all) the broad education necessary to understand the impact of engineering solutions in a global, economic

  13. Problems in Engineering and

    E-Print Network [OSTI]

    Eagar, Thomas W.

    Problems in Engineering and Science Education Why Do We Have a Weakness in Materials Synthesis, Materials Science and Engineering in the 1990s: Maintaining Competitiveness in the Age of Materials science and engi- neering alone; it is symptomatic of the way we teach all science and engineering. We

  14. GEORGIA INSTITUTE OF TECHNOLOGY COLLEGE OF ENGINEERING 1 College of Engineering

    E-Print Network [OSTI]

    Li, Mo

    Electrical and Computer Engineering Industrial and Systems Engineering Materials Science and Engineering and Biomolecular Engineering Civil and Environmental Engineering Electrical and Computer Engineering IndustrialGEORGIA INSTITUTE OF TECHNOLOGY · COLLEGE OF ENGINEERING 1 College of Engineering Aerospace

  15. Naval Architecture and Marine Engineering

    E-Print Network [OSTI]

    Eustice, Ryan

    knowledge of mathematics, science, and engineering within naval architecture and marine engineering and marine engineering problems; an ability to apply basic knowledge in fluid mechanics, dynamicsNaval Architecture and Marine Engineering Undergraduate Program The University of Michigan #12

  16. MECHANICAL ENGINEERING Program of Study

    E-Print Network [OSTI]

    Thomas, Andrew

    offers graduate programs in the fields of thermal science and engineering mechanics. Current areasMECHANICAL ENGINEERING Program of Study Correspondence The Department of Mechanical Engineering of research activity include Biomedical Engineering, Biomimetics, Composite Materials, Computational Mechanics

  17. On-chip whole-animal manipulation for high-throughput subcellular-resolution in-vivo drug/genetic screening

    E-Print Network [OSTI]

    Yanik, Mehmet Fatih

    Techniques for rapid and automated small-animal manipulation and immobilization are necessary for high-throughput in vivo genetic/drug screens using cellular and sub-cellular features in multicellular organisms. We present ...

  18. Is New Zealand's food supply under threat? What have we learned from the escape of genetically modified (GM) corn throughout New

    E-Print Network [OSTI]

    Hickman, Mark

    Is New Zealand's food supply under threat? What have we learned from the escape of genetically. This realization undermines claims that uses of genetically modified organisms (GMOs) outside of the laboratory can modified (GM) corn throughout New Zealand? The most alarming outcome of the recently concluded

  19. Copyright 2001 by the Genetics Society of America Empirical Evaluation of Genetic Clustering Methods Using Multilocus

    E-Print Network [OSTI]

    Rosenberg, Noah

    Copyright 2001 by the Genetics Society of America Empirical Evaluation of Genetic Clustering, 2001 Accepted for publication August 1, 2001 ABSTRACT We tested the utility of genetic cluster analysis

  20. The Organization of Administrative Justice Systems:

    E-Print Network [OSTI]

    Kagan, Robert A.

    2006-01-01T23:59:59.000Z

    and fears of genetically modified foods – along with theissues such as genetically modified crops and foods, sale of

  1. Reaction Engineering with Metal-Organic Framework Catalysts

    E-Print Network [OSTI]

    Melkonian, Arek

    2013-01-01T23:59:59.000Z

    60%, high hydrogen flow of 50 ccm, and intermediate reactorare listed in Table 2.1. Propylene Flow (ccm) HydrogenFlow (ccm) Table 2.1: Propylene flows paired with different

  2. Impacts of engineering nanoparticles on dissolved organic matter assembly

    E-Print Network [OSTI]

    Chen, Chi-Shuo

    2012-01-01T23:59:59.000Z

    for the marine food web in the deep ocean, the possibilityfor the marine food web in the deep ocean, the possibility

  3. Conjugated Polymer Design and Engineering for Organic Electronics

    E-Print Network [OSTI]

    Woo, Claire Hoi Kar

    2011-01-01T23:59:59.000Z

    were recorded in a Keithly 236 SMU. Absorption spectra werewith a Keithley 236 SMU. Eight devices were averaged forwith a Keithley 236 SMU. Eight devices were averaged for

  4. Conjugated Polymer Design and Engineering for Organic Electronics

    E-Print Network [OSTI]

    Woo, Claire Hoi Kar

    2011-01-01T23:59:59.000Z

    variable on photovoltaic performance have been pursued. 11-their photovoltaic device performance. In addition, we showoptimized photovoltaic device performance of three PDPP2FT

  5. Reaction Engineering with Metal-Organic Framework Catalysts

    E-Print Network [OSTI]

    Melkonian, Arek

    2013-01-01T23:59:59.000Z

    support effects. Applied Catalysis B: Environmental 2.methane-air combustion. Applied Catalysis A: General 2003,

  6. Reaction Engineering with Metal-Organic Framework Catalysts

    E-Print Network [OSTI]

    Melkonian, Arek

    2013-01-01T23:59:59.000Z

    hydrogenation of propylene to propane. There is a spectrumNMR spectra. The area under the propane methyl resonance ismethyl resonance. Since propane has two methyl groups, its

  7. Conjugated Polymer Design and Engineering for Organic Electronics

    E-Print Network [OSTI]

    Woo, Claire Hoi Kar

    2011-01-01T23:59:59.000Z

    G. ; Reynaers, H. Polymer, 1989, 30, 2164-2169. (41) Alamo,M. M. ; Janssen, R. A. J. Polymer 2009, 50, 4564-4570. (14)Conductive Molecules and Polymers, Volume 2, Conductive

  8. Conjugated Polymer Design and Engineering for Organic Electronics

    E-Print Network [OSTI]

    Woo, Claire Hoi Kar

    2011-01-01T23:59:59.000Z

    separation and low short-circuit current densities. 9-12is called the short-circuit current (J sc ) and representsvoltage (V oc ), short-circuit current density (J sc ), and

  9. ENGINEERING SYSTEMS SUSTAINABILITY AS AN ORGANIZING DESIGN PRINCIPLE FOR

    E-Print Network [OSTI]

    Entekhabi, Dara

    in Automotive Aluminum d. Lean Sustainment Initiative (LSI) for the US Air Force: Tracing the Repair

  10. Inorganic-Organic Hydrogel Scaffolds for Tissue Engineering

    E-Print Network [OSTI]

    Bailey, Brennan

    2013-07-11T23:59:59.000Z

    was focused on enhancing the osteogenic potential of PDMS via functionalization with amine and phosphonate. Both amine and phosphonate moieties have demonstrated bioactivity. Thus, it was expected that these properties will be enhanced for amine...

  11. Impacts of engineering nanoparticles on dissolved organic matter assembly

    E-Print Network [OSTI]

    Chen, Chi-Shuo

    2012-01-01T23:59:59.000Z

    QDs, e.g. , CdSe/ZnS and InGaP/ZnS), 4) zero-valent metalQDs, e.g. , CdSe/ZnS and InGaP/ZnS), 4) zero-valent metal

  12. Electric-Drive Vehicle engineering

    E-Print Network [OSTI]

    Berdichevsky, Victor

    Electric-Drive Vehicle engineering COLLEGE of ENGINEERING Electric-driveVehicleEngineering engineers for 80 years t Home to nation's first electric-drive vehicle engineering program and alternative-credit EDGE Engineering Entrepreneur Certificate Program is a great addition to an electric-drive vehicle

  13. Engineering at a Glance Faculty

    E-Print Network [OSTI]

    Guenther, Frank

    #12;Engineering at a Glance · Faculty ­105 Tenured/tenure track ­10 Non Engineering ­Electrical and Computer Engineering ­Mechanical Engineering · Divisions ­Material Science and Engineering ­Systems Engineering #12;Undergraduate Degree Programs

  14. 2012-2013announcement Engineering

    E-Print Network [OSTI]

    California at Irvine, University of

    2012-2013announcement College of Engineering A Guide to Undergraduate and Graduate Study Educating Bioengineering 13 Civil and Environmental Engineering 17 Electrical Engineering and Computer Sciences 21 Engineering Science 25 Industrial Engineering and Operations Research 31 Materials Science and Engineering 35

  15. Mechanical Engineering Department technical review

    SciTech Connect (OSTI)

    Carr, R.B.; Abrahamson, L.; Denney, R.M.; Dubois, B.E (eds.) [eds.

    1982-01-01T23:59:59.000Z

    Technical achievements and publication abstracts related to research in the following Divisions of Lawrence Livermore Laboratory are reported in this biannual review: Nuclear Fuel Engineering; Nuclear Explosives Engineering; Weapons Engineering; Energy Systems Engineering; Engineering Sciences; Magnetic Fusion Engineering; and Material Fabrication. (LCL)

  16. Quantum mechanical Carnot engine

    E-Print Network [OSTI]

    Bender, C M; Meister, B K

    2000-01-01T23:59:59.000Z

    A cyclic thermodynamic heat engine runs most efficiently if it is reversible. Carnot constructed such a reversible heat engine by combining adiabatic and isothermal processes for a system containing an ideal gas. Here, we present an example of a cyclic engine based on a single quantum-mechanical particle confined to a potential well. The efficiency of this engine is shown to equal the Carnot efficiency because quantum dynamics is reversible. The quantum heat engine has a cycle consisting of adiabatic and isothermal quantum processes that are close analogues of the corresponding classical processes.

  17. Quantum mechanical Carnot engine

    E-Print Network [OSTI]

    C. M. Bender; D. C. Brody; B. K. Meister

    2000-07-03T23:59:59.000Z

    A cyclic thermodynamic heat engine runs most efficiently if it is reversible. Carnot constructed such a reversible heat engine by combining adiabatic and isothermal processes for a system containing an ideal gas. Here, we present an example of a cyclic engine based on a single quantum-mechanical particle confined to a potential well. The efficiency of this engine is shown to equal the Carnot efficiency because quantum dynamics is reversible. The quantum heat engine has a cycle consisting of adiabatic and isothermal quantum processes that are close analogues of the corresponding classical processes.

  18. Organic photovoltaics and concentrators

    E-Print Network [OSTI]

    Mapel, Jonathan King

    2008-01-01T23:59:59.000Z

    The separation of light harvesting and charge generation offers several advantages in the design of organic photovoltaics and organic solar concentrators for the ultimate end goal of achieving a lower cost solar electric ...

  19. Prescott: Engineering communication interface. October 2010 Engineering Communication Interface: An Engineering Multidisciplinary Project.

    E-Print Network [OSTI]

    Aloul, Fadi

    students from tertiary institutions with a sound knowledge of engineering theory and practice alone. Well is no longer sufficient to graduate engineering students from tertiary institutions with a sound knowledge1 Prescott: Engineering communication interface. October 2010 Engineering Communication

  20. Continuing engineering education for software engineering professionals

    SciTech Connect (OSTI)

    Davis, P.I.

    1992-02-19T23:59:59.000Z

    Designers of software for safety-critical applications are impelled to supplement their education through continuing engineering studies in the areas of requirements analysis, hazard identification, risk analysis, fault tolerance, failure modes, and psychology. Today's complex level of design is contributing to opportunities for catastrophic design errors in computer functions where failure of such functions is capable of causing injury and death. A syllabus of post-graduate, core studies within the curricula of five engineering specialties is suggested. Software Engineers are exhorted to undertake a professional, responsible role in safety-critical software design.