National Library of Energy BETA

Sample records for general public coke

  1. General Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    General Publications General Publications Print ALS Strategic Plan 2015-19 cover image An updated version of the ALS Strategic Plan, covering the five-year period from 2015 to 2019. As in the 2014-18 version, Section I gives a brief synopsis on beamline and endstation projects. The science drivers behind these projects are explained in greater detail in Section II, and a very brief description of emerging plans for a ALS-U are in Section III. Soft X-ray Science Opportunities Using

  2. Innovative coke oven gas cleaning system for retrofit applications. Volume 1, Public design report

    SciTech Connect (OSTI)

    Not Available

    1994-05-24

    This Public Design Report provides, in a single document, available nonproprietary design -information for the ``Innovative Coke Oven Gas Cleaning System for Retrofit Applications`` Demonstration Project at Bethlehem Steel Corporation`s Sparrows Point, Maryland coke oven by-product facilities. This project demonstrates, for the first time in the United States, the feasibility of integrating four commercially available technologies (processes) for cleaning coke oven gas. The four technologies are: Secondary Gas Cooling, Hydrogen Sulfide and Ammonia Removal, Hydrogen Sulfide and Ammonia Recovery, and Ammonia Destruction and Sulfur Recovery. In addition to the design aspects, the history of the project and the role of the US Department of,Energy are briefly discussed. Actual plant capital and projected operating costs are also presented. An overview of the integration (retrofit) of the processes into the existing plant is presented and is followed by detailed non-proprietary descriptions of the four technologies and their overall effect on reducing the emissions of ammonia, sulfur, and other pollutants from coke oven gas. Narrative process descriptions, simplified process flow diagrams, input/output stream data, operating conditions, catalyst and chemical requirements, and utility requirements are given for each unit. Plant startup provisions, environmental considerations and control monitoring, and safety considerations are also addressed for each process.

  3. Determination of electrical resistivity of dry coke beds

    SciTech Connect (OSTI)

    Eidem, P.A.; Tangstad, M.; Bakken, J.A.

    2008-02-15

    The electrical resistivity of the coke bed is of great importance when producing FeMn, SiMn, and FeCr in a submerged arc furnace. In these processes, a coke bed is situated below and around the electrode tip and consists of metallurgical coke, slag, gas, and metal droplets. Since the basic mechanisms determining the electrical resistivity of a coke bed is not yet fully understood, this investigation is focused on the resistivity of dry coke beds consisting of different carbonaceous materials, i.e., coke beds containing no slag or metal. A method that reliably compares the electrical bulk resistivity of different metallurgical cokes at 1500{sup o} C to 1600{sup o}C is developed. The apparatus is dimensioned for industrial sized materials, and the electrical resistivity of anthracite, charcoal, petroleum coke, and metallurgical coke has been measured. The resistivity at high temperatures of the Magnitogorsk coke, which has the highest resistivity of the metallurgical cokes investigated, is twice the resistivity of the Corus coke, which has the lowest electrical resistivity. Zdzieszowice and SSAB coke sort in between with decreasing resistivities in the respective order. The electrical resistivity of anthracite, charcoal, and petroleum coke is generally higher than the resistivity of the metallurgical cokes, ranging from about two to about eight times the resistivity of the Corus coke at 1450{sup o}C. The general trend is that the bulk resistivity of carbon materials decreases with increasing temperature and increasing particle size.

  4. Public Utilities Commission General Order NO. 131-D | Open Energy...

    Open Energy Info (EERE)

    Public Utilities Commission General Order NO. 131-D Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- RegulationRegulation: Public Utilities...

  5. The waste water free coke plant

    SciTech Connect (OSTI)

    Schuepphaus, K.; Brink, N.

    1995-12-01

    Apart from coke which is the actual valuable material a coke oven plant also produces a substantial volume of waste water. These effluent water streams are burdened with organic components (e.g. phenols) and inorganic salts (e.g. NH{sub 4}Cl); due to the concentration of the constituents contained therein these effluent waters must be subjected to a specific treatment before they can be introduced into public waters. For some years a lot of separation tasks have been solved successfully by applying the membrane technology. It was especially the growing number of membrane facilities for cleaning of landfill leakage water whose composition can in fact be compared with that of coking plant waste waters (organic constituents, high salt fright, ammonium compounds) which gave Thyssen Still Otto Anlagentechnik the idea for developing a process for coke plant effluent treatment which contains the membrane technology as an essential component.

  6. REDUCING POWER PRODUCTION COSTS BY UTILIZING PETROLEUM COKE

    SciTech Connect (OSTI)

    Kevin C. Galbreath; Donald L. Toman; Christopher J. Zygarlicke

    1999-09-01

    Petroleum coke, a byproduct of the petroleum-refining process, is an attractive primary or supplemental fuel for power production primarily because of a progressive and predictable increase in the production volumes of petroleum coke (1, 2). Petroleum coke is most commonly blended with coal in proportions suitable to meet sulfur emission compliance. Petroleum coke is generally less reactive than coal; therefore, the cofiring of petroleum coke with coal typically improves ignition, flame stability, and carbon loss relative to the combustion of petroleum coke alone. Although petroleum coke is a desirable fuel for producing relatively inexpensive electrical power, concerns about the effects of petroleum coke blending on combustion and pollution control processes exist in the coal-fired utility industry (3). The Energy & Environmental Research Center (EERC) completed a 2-year technical assessment of petroleum coke as a supplemental fuel. A survey questionnaire was sent to seven electric utility companies that are currently cofiring coal and petroleum coke in an effort to solicit specific suggestions on research needs and fuel selections. An example of the letter and survey questionnaire is presented in Appendix A. Interest was expressed by most utilities in evaluating the effects of petroleum coke blending on grindability, combustion reactivity, fouling, slagging, and fly ash emissions control. Unexpectedly, concern over corrosion was not expressed by the utilities contacted. Although all seven utilities responded to the question, only two utilities, Northern States Power Company (NSP) and Ameren, sent fuels to the EERC for evaluation. Both utilities sent subbituminous coals from the Power River Basin and petroleum shot coke samples. Petroleum shot coke is produced unintentionally during operational upsets in the petroleum refining process. This report evaluates the effects of petroleum shot coke blending on grindability, fuel reactivity, fouling/slagging, and

  7. Blast furnace coke quality in relation to petroleum coke addition

    SciTech Connect (OSTI)

    Alvarez, R.; Diez, M.A.; Menendez, J.A.; Barriocanal, C.; Pis, J.J.; Sirgado, M.

    1995-12-01

    The incorporation of petroleum coke as an additive in industrial coking coal blends is a practice often used by steel companies. A suitable blast furnace coke produced by replacing part of the coking coal blend with a suitable petroleum coke (addition of 5 to 15%), was made by Great Lakes Carbon Corporation and successfully tested at several blast furnaces. This coke had lower reactivity, less ash and slightly higher sulfur content than coke made without the addition of petroleum coke. In contrast with these results, it has been reported in a BCRA study that additions of petroleum coke to a strong coking coal, above 5 wt%, increased coke reactivity. These differences may be explained on the basis of the coal or blend characteristics to which petroleum coke is added. Petroleum coke addition seems to give better results if the coal/blend has high fluidity. The present situation in Spain is favorable for the use of petroleum coke. So, a study of laboratory and semi-industrial scale was made to assess the possibility of using petroleum coke as an additive to the typical industrial coal blend coked by the Spanish Steel Company, ENSIDESA. The influence of the petroleum coke particle size was also studied to semi-industrial scale.

  8. Western Canadian coking coals -- Thermal rheology and coking quality

    SciTech Connect (OSTI)

    Leeder, W.R.; Price, J.T.; Gransden, J.F.

    1997-12-31

    Methods of predicting coke strength developed from the thermal rheological properties of Carboniferous coals frequently indicate that Cretaceous coals would not make high quality coke -- yet both types of coals produce coke suitable for the iron blast furnace. This paper will discuss the reasons why Western Canadian coals exhibit lower rheological values and how to predict the strength of coke produced from them.

  9. REDUCING POWER PRODUCTION COSTS BY UTILIZING PETROLEUM COKE

    SciTech Connect (OSTI)

    1998-09-01

    A Powder River Basin subbituminous coal from the North Antelope mine and a petroleum shot coke were received from Northern States Power Company (NSP) for testing the effects of parent fuel properties on coal-coke blend grindability and evaluating the utility of petroleum coke blending as a strategy for improving electrostatic precipitator (ESP) particulate collection efficiency. Petroleum cokes are generally harder than coals, as indicated by Hardgrove grindability tests. Therefore, the weaker coal component may concentrate in the finer size fractions during the pulverizing of coal-coke blends. The possibility of a coal-coke size fractionation effect is being investigated because it may adversely affect combustion performance. Although the blending of petroleum coke with coal may adversely affect combustion performance, it may enhance ESP particulate collection efficiency. Petroleum cokes contain much higher concentrations of V relative to coals. Consequently, coke blending can significantly increase the V content of fly ash resulting from coal-coke combustion. Pentavalent vanadium oxide (V{sub 2}O{sub 5}) is a known catalyst for transforming gaseous sulfur dioxide (SO{sub 2}[g]) to gaseous sulfur trioxide (SO{sub 3}[g]). The presence of SO{sub 3}(g) strongly affects fly ash resistivity and, thus, ESP performance.

  10. Petroleum coke supply: present problems and future prospects

    SciTech Connect (OSTI)

    Brandt, H.H.

    1982-08-01

    Since the 1973 OPEC oil embargo, the coke market's strength has gradually shifted, for the most part, from the buyer to the seller. This general assessment is subject to localized exceptions and temporary reversals (such as the present market weakness due to the low level of primary aluminum production). However, there are two major factors which will influence the trend toward higher coke prices for anode use by aluminum producers: decreasing supplies of high-quality coke, and revised marketing strategies of coke producers.

  11. NAC 704 - Regulation of Public Utilities Generally | Open Energy...

    Open Energy Info (EERE)

    (2014). Retrieved from "http:en.openei.orgwindex.php?titleNAC704-RegulationofPublicUtilitiesGenerally&oldid800553" Feedback Contact needs updating Image needs...

  12. NRS 704 - Regulation of Public Utilities Generally | Open Energy...

    Open Energy Info (EERE)

    (2014). Retrieved from "http:en.openei.orgwindex.php?titleNRS704-RegulationofPublicUtilitiesGenerally&oldid800590" Feedback Contact needs updating Image needs...

  13. TNRC 61 - General Provisions Use and Maintenance of Public Beaches...

    Open Energy Info (EERE)

    1 - General Provisions Use and Maintenance of Public Beaches Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: TNRC 61 - General...

  14. Reducing power production costs by utilizing petroleum coke. Annual report

    SciTech Connect (OSTI)

    Galbreath, K.C.

    1998-07-01

    A Powder River Basin subbituminous coal from the North Antelope mine and a petroleum shot coke were received from Northern States Power Company (NSP) for testing the effects of parent fuel properties on coal-coke blend grindability and evaluating the utility of petroleum coke blending as a strategy for improving electrostatic precipitator (ESP) particulate collection efficiency. Petroleum cokes are generally harder than coals, as indicated by Hardgrove grindability tests. Therefore, the weaker coal component may concentrate in the finer size fractions during the pulverizing of coal-coke blends. The possibility of a coal-coke size fractionation effect is being investigated because it may adversely affect combustion performance, it may enhance ESP particulate collection efficiency. Petroleum cokes contain much higher concentrations of V relative to coals. Consequently, coke blending can significantly increase the V content of fly ash resulting from coal-coke combustion. Pentavalent vanadium oxide (V{sub 2}O{sub 5}) is a known catalyst for transforming gaseous sulfur dioxide (SO{sub 2}[g]) to gaseous sulfur trioxide (SO{sub 3}[g]). The presence of SO{sub 3}(g) strongly affects fly ash resistivity and, thus, ESP performance.

  15. VACASULF operation at Citizens Gas and Coke Utility

    SciTech Connect (OSTI)

    Currey, J.H.

    1995-12-01

    Citizens Gas and Coke Utility is a Public Charitable Trust which operates as the Department of Utilities of the City of Indianapolis, Indiana. Indianapolis Coke, the trade name for the Manufacturing Division of the Utility, operates a by-products coke plant in Indianapolis, Indiana. The facility produces both foundry and blast furnace coke. Surplus Coke Oven gas, generated by the process, is mixed with Natural Gas for sale to industrial and residential customers. In anticipation of regulatory developments, beginning in 1990, Indianapolis Coke undertook the task to develop an alternate Coke Oven Gas desulfurization technology for its facility. The new system was intended to perform primary desulfurization of the gas, dramatically extending the oxide bed life, thus reducing disposal liabilities. Citizens Gas chose the VACASULF technology for its primary desulfurization system. VACASULF requires a single purchased material, Potassium Hydroxide (KOH). The KOH reacts with Carbon Dioxide in the coke Oven Gas to form Potassium Carbonate (potash) which in turn absorbs the Hydrogen Sulfide. The rich solution releases the absorbed sulfide under strong vacuum in the desorber column. Operating costs are reduced through utilization of an inherent heat source which is transferred indirectly via attendant reboilers. The Hydrogen Sulfide is transported by the vacuum pumps to the Claus Kiln and Reactor for combustion, reaction, and elemental Sulfur recovery. Regenerated potash solution is returned to the Scrubber.

  16. Coking and gasification process

    DOE Patents [OSTI]

    Billimoria, Rustom M.; Tao, Frank F.

    1986-01-01

    An improved coking process for normally solid carbonaceous materials wherein the yield of liquid product from the coker is increased by adding ammonia or an ammonia precursor to the coker. The invention is particularly useful in a process wherein coal liquefaction bottoms are coked to produce both a liquid and a gaseous product. Broadly, ammonia or an ammonia precursor is added to the coker ranging from about 1 to about 60 weight percent based on normally solid carbonaceous material and is preferably added in an amount from about 2 to about 15 weight percent.

  17. High coking value pitch

    SciTech Connect (OSTI)

    Miller, Douglas J.; Chang, Ching-Feng; Lewis, Irwin C.; Lewis, Richard T.

    2014-06-10

    A high coking value pitch prepared from coal tar distillate and has a low softening point and a high carbon value while containing substantially no quinoline insolubles is disclosed. The pitch can be used as an impregnant or binder for producing carbon and graphite articles.

  18. Coke formation in visbreaking process

    SciTech Connect (OSTI)

    Yan, T.Y. )

    1987-04-01

    Visbreaking is a mild cracking process primarily used to reduce residual oil viscosity and thus decrease the amount of cutter stock required for blending to heavy fuels specification. It can also be used to produce incremental quantities of gasoline, middle distillates and catalytic cracker feeds. This process was widely used in the 1930s and 1940s and became obsolete until a few years ago. When the need for increased conversion of residues to light products became desirable, visbreaking offered economic advantages to many refining schemes - especially in Western Europe. Between 1978-1981, Exxon brought on stream seven visbreakers ranging from 1900 to 9100 tons/SD capacity. In January 1983, the world-wide visbreaking capacity was over 2 MM B/SD. The visbreaking process and its application in refinery operations have been well described. In general, the process economics improve as the process severity is increased but it is limited by coke formation in the process. For this reason, they have studied the kinetics of coke formation in the visbreaking process.

  19. Treatment of petroleum cokes to inhibit coke puffing

    SciTech Connect (OSTI)

    Orac, T.H.; Quandt, H.C.; Ball, D.R.

    1992-06-02

    This patent describes apparatus for treating raw petroleum coke particles. It comprises an elongated, cylindrical, calcining kiln having an inlet end and an outlet end; and entrance chamber and a discharge chamber, an elongated, cylindrical, cooler having an inlet end and an outlet end; means defining a retention chamber communicating with the discharge chamber; means defining a hot zone communicating with the retention chamber and the inlet end of the cooler; means for introducing a dry, granulated, puffing inhibitor into the retention chamber in contact with the calcined coke particles; and a coke delivery chamber for collecting the cooled, calcined coke particles at the outlet end of the cooler.

  20. COKEMASTER: Coke plant management system

    SciTech Connect (OSTI)

    Johanning, J.; Reinke, M.

    1996-12-31

    To keep coke utilization in ironmaking as competitive as possible, the potential to improve the economics of coke production has to be utilized. As one measure to meet this need of its customers, Krupp Koppers has expanded its existing ECOTROL computer system for battery heating control to a comprehensive Coke Plant Management System. Increased capacity utilization, lower energy consumption, stabilization of plant operation and ease of operation are the main targets.

  1. Coke from coal and petroleum

    DOE Patents [OSTI]

    Wynne, Jr., Francis E.; Lopez, Jaime; Zaborowsky, Edward J.

    1981-01-01

    A carbonaceous coke is manufactured by the delayed coking of a slurry mixture of from about 10 to about 30 weight percent of caking or non-caking coal and the remainder a petroleum resid blended at below 50.degree. C.

  2. Clean Production of Coke from Carbonaceous Fines

    SciTech Connect (OSTI)

    Craig N. Eatough

    2004-11-16

    In order to produce steel (a necessary commodity in developed nations) using conventional technologies, you must have metallurgical coke. Current coke-making technology pyrolyzes high-quality coking coals in a slot oven, but prime coking coals are becoming more expensive and slot ovens are being shut-down because of age and environmental problems. The United States typically imports about 4 million tons of coke per year, but because of a world-wide coke scarcity, metallurgical coke costs have risen from about $77 per tonne to more than $225. This coke shortage is a long-term challenge driving up the price of steel and is forcing steel makers to search for alternatives. Combustion Resources (CR) has developed a technology to produce metallurgical coke from alternative feedstocks in an environmentally clean manner. The purpose of the current project was to refine material and process requirements in order to achieve improved economic benefits and to expand upon prior work on the proposed technology through successful prototype testing of coke products. The ultimate objective of this project is commercialization of the proposed technology. During this project period, CR developed coke from over thirty different formulations that meet the strength and reactivity requirements for use as metallurgical coke. The technology has been termed CR Clean Coke because it utilizes waste materials as feedstocks and is produced in a continuous process where pollutant emissions can be significantly reduced compared to current practice. The proposed feed material and operating costs for a CR Clean Coke plant are significantly less than conventional coke plants. Even the capital costs for the proposed coke plant are about half that of current plants. The remaining barrier for CR Clean Coke to overcome prior to commercialization is full-scale testing in a blast furnace. These tests will require a significant quantity of product (tens of thousands of tons) necessitating the construction

  3. Mathematical modeling of clearance between wall of coke oven and coke cake

    SciTech Connect (OSTI)

    Nushiro, K.; Matsui, T.; Hanaoka, K.; Igawa, K.; Sorimachi, K.

    1995-12-01

    A mathematical model was developed for estimating the clearance between the wall of the coke oven and the coke cake. The prediction model is based on the balance between the contractile force and the coking pressure. A clearance forms when the contractile force exceeds the coking pressure in this model. The contractile force is calculated in consideration of the visco-elastic behavior of the thermal shrinkage of the coke. The coking pressure is calculated considering the generation and dispersion of gas in the melting layer. The relaxation time off coke used in this model was obtained with a dilatometer under the load application. The clearance was measured by the laser sensor, and the internal gas pressure was measured in a test oven. The clearance calculated during the coking process were in good agreement with the experimental results, which supported the validity of the mathematical model.

  4. Inhibition of coke formation in pyrolysis furnaces

    SciTech Connect (OSTI)

    Tong, Y.; Poindexter, M.K.; Rowe, C.T.

    1995-12-31

    Coke formation in pyrolysis furnaces, which thermally convert hydrocarbons to ethylene as well as other useful products, adversely affects product yields, causes furnace down time for coke removal, and shortens furnace coil life. A phosphorus-based chemical treatment program was developed to inhibit the coke formation. The anticoking performance of the phosphorus-based treatment program was studied using a bench scale coking rate measurement apparatus. The programs`s influence on coke morphology and reactor surface was addressed using SEM/EDX surface characterization techniques. For comparison, similar studies were carried out with sulfur-containing species which are conventionally used in industrial practice as furnace additives. The present work demonstrated that the phosphorus-based treatment program provided an efficient and durable surface passivation against coke formation.

  5. Coke cake behavior under compressive forces

    SciTech Connect (OSTI)

    Watakabe, S.; Takeda, T.; Itaya, H.; Suginobe, H.

    1997-12-31

    The deformation of the coke cake and load on the side wall during pushing were studied using an electric furnace equipped with a movable wall. Coke cake was found to deform in three stages under compressive forces. The coke cake was shortened in the pushing direction in the cake deformation stage, and load was generated on the side walls in the high wall load stage. Secondary cracks in the coke cake were found to prevent load transmission on the wall. The maximum load transmission rate was controlled by adjusting the maximum fluidity and mean reflectance of the blended coal.

  6. Collector main replacement at Indianapolis Coke

    SciTech Connect (OSTI)

    Sickle, R.R. Van

    1997-12-31

    Indianapolis Coke is a merchant coke producer, supplying both foundry and blast furnace coke to the industry. The facility has three coke batteries: two 3 meter batteries, one Wilputte four divided and one Koppers Becker. Both batteries are underjet batteries and are producing 100% foundry coke at a net coking time of 30.6 hours. This paper deals with the No. 1 coke battery, which is a 72 oven, gun fired, 5 meter Still battery. No. 1 battery produces both foundry and blast furnace coke at a net coking rate of 25.4 hours. No. 1 battery was commissioned in 1979. The battery is equipped with a double collector main. Although many renovations have been completed to the battery, oven machinery and heating system, to date no major construction projects have taken place. Deterioration of the collector main was caused in part from elevated levels of chlorides in the flushing liquor, and temperature fluctuations within the collector main. The repair procedures are discussed.

  7. Coke County, Texas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Zone Subtype B. Places in Coke County, Texas Blackwell, Texas Bronte, Texas Robert Lee, Texas Retrieved from "http:en.openei.orgwindex.php?titleCokeCounty,Texas&oldid...

  8. Factors affecting coking pressures in tall coke ovens

    SciTech Connect (OSTI)

    Grimley, J.J.; Radley, C.E.

    1995-12-01

    The detrimental effects of excessive coking pressures, resulting in the permanent deformation of coke oven walls, have been recognized for many years. Considerable research has been undertaken worldwide in attempts to define the limits within which a plant may safely operate and to quantify the factors which influence these pressures. Few full scale techniques are available for assessing the potential of a coal blend for causing wall damage. Inference of dangerous swelling pressures may be made however by the measurement of the peak gas pressure which is generated as the plastic layers meet and coalesce at the center of the oven. This pressure is referred to in this report as the carbonizing pressure. At the Dawes Lane cokemaking plant of British Steel`s Scunthorpe Works, a large database has been compiled over several years from the regulator measurement of this pressure. This data has been statistically analyzed to provide a mathematical model for predicting the carbonizing pressure from the properties of the component coals, the results of this analysis are presented in this report.

  9. Simulation of industrial coking -- Phase 1

    SciTech Connect (OSTI)

    Todoschuk, T.W.; Price, J.T.; Gransden, J.F.

    1997-12-31

    Two statistically designed experimental programs using an Appalachian and a Western Canadian coal blend were run in CANMET`s 460mm (18 inch) movable wall oven. Factors included coal grind, moisture, oil addition, carbonization rate and final coke temperature. Coke quality parameters including CSR, coal charge characteristics and pressure generation were analyzed.

  10. Coke oven gas injection to blast furnaces

    SciTech Connect (OSTI)

    Maddalena, F.L.; Terza, R.R.; Sobek, T.F.; Myklebust, K.L.

    1995-12-01

    U.S. Steel has three major facilities remaining in Pennsylvania`s Mon Valley near Pittsburgh. The Clairton Coke Works operates 12 batteries which produce 4.7 million tons of coke annually. The Edgar Thomson Works in Braddock is a 2.7 million ton per year steel plant. Irvin Works in Dravosburg has a hot strip mill and a range of finishing facilities. The coke works produces 120 mmscfd of coke oven gas in excess of the battery heating requirements. This surplus gas is used primarily in steel re-heating furnaces and for boiler fuel to produce steam for plant use. In conjunction with blast furnace gas, it is also used for power generation of up to 90 MW. However, matching the consumption with the production of gas has proved to be difficult. Consequently, surplus gas has been flared at rates of up to 50 mmscfd, totaling 400 mmscf in several months. By 1993, several changes in key conditions provided the impetus to install equipment to inject coke oven gas into the blast furnaces. This paper describes the planning and implementation of a project to replace natural gas in the furnaces with coke oven gas. It involved replacement of 7 miles of pipeline between the coking plants and the blast furnaces, equipment capable of compressing coke oven gas from 10 to 50 psig, and installation of electrical and control systems to deliver gas as demanded.

  11. Rheology of petroleum coke-water slurry

    SciTech Connect (OSTI)

    Prasad, M.; Mall, B.K.; Mukherjee, A.; Basu, S.K.; Verma, S.K.; Narasimhan, K.S.

    1998-07-01

    This paper reports the results of the studies carried out on the optimization of particle size distribution, the rheological characteristics and stability of highly loaded petroleum coke-water slurry using three additives. The solids loading achieved in the slurries were in the range of 65% to 75.6% depending on the additives used. Slurry viscosity varied between 267 to 424 mPas at 128 s{sup {minus}} shear rate. The petroleum coke-water slurries exhibited pseudoplastic characteristics with yield tending towards Bingham plastic as the solids loading progressively increased. The effect of addition of petroleum coke to the extent of 25% in coal-water slurry prepared from low ash Ledo coal of Makum field in Assam was also examined. The slurry containing coal-petroleum coke blend showed better stability, having shelf life of 7 days as compared to 5 days in the case of petroleum coke-water slurry.

  12. Heteroatom incorporated coke for electrochemical cell electrode

    DOE Patents [OSTI]

    Lewis, Irwin Charles (Strongsville, OH); Greinke, Ronald Alfred (Medina, OH)

    1997-01-01

    This invention relates to an electrode for a coke/alkali metal electrochemical cell comprising: (a) calcined coke particles: (i) that contain at least 0.5 weight percent of nitrogen heteroatoms and at least 1.0 weight percent sulfur heteroatoms, and (ii) that have an average particle size from 2 microns to 40 microns with essentially no particles being greater than 50 microns. (b) a binder This invention also relates to a coke/alkali metal electrochemical cell comprising: (a) an electrode as described above, (b) a non-aqueous electrolytic solution comprising an organic aprotic solvent and an electrically conductive salt, and (c) a counterelectrode.

  13. Heteroatom incorporated coke for electrochemical cell electrode

    DOE Patents [OSTI]

    Lewis, I.C.; Greinke, R.A.

    1997-06-17

    This invention relates to an electrode for a coke/alkali metal electrochemical cell comprising: (a) calcined coke particles: (1) that contain at least 0.5 weight percent of nitrogen heteroatoms and at least 1.0 weight percent sulfur heteroatoms, and (2) that have an average particle size from 2 microns to 40 microns with essentially no particles being greater than 50 microns and (b) a binder. This invention also relates to a coke/alkali metal electrochemical cell comprising: (a) an electrode as described above, (b) a non-aqueous electrolytic solution comprising an organic aprotic solvent and an electrically conductive salt, and (c) a counterelectrode. 5 figs.

  14. General Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Light sources are uniquely positioned to jump-start a global revolution in renewable and carbon-neutral energy technologies. This 24-page brochure describes many specific ways in...

  15. On the utilization of coking plant surface runoff

    SciTech Connect (OSTI)

    Evzel'man, I.B.; Kagasov, V.M.; Maiskii, S.V.; Pimenov, I.V.; Rod'kin, S.P.; Ushakov, E.B.

    1983-01-01

    Surface runoff from the industrial sites of coking plants in the East and Center of the USSR is usually diverted into a storm sewer in a mixture with the conditionally pure water. General data on the contamination of this mixture (industrial stormwater) and the snow cover at a number of coking plants in this region are tabulated. Our data on the quality of industrial stormwater show that schemes for utilization of surface runoff must include pretreatment to remove suspended matter and oils. For example, the oil concentration in melt water is 2-10 times greater than the concentration in industrial phenol-containing effluent (2). When the biochemical facilities receive surface runoff containing up to 40 g/l suspended solids, which occurs in periods of snowmelt, without treatment to remove these solids, there are difficulties with the discharge of tar from the secondary sedimenters of the biochemical treatment plant. An analysis of the literature materials (3-9) showed that the maximum allowable concentration of suspended solids in make-up water for the closed-cycle heat exchange water cooling system should apparently not exceed 25 mg/l. The level of this parameter in the make-up water of these systems at coke plants requires correction.

  16. Fundamentals of Delayed Coking Joint Industry Project

    SciTech Connect (OSTI)

    Michael Volk; Keith Wisecarver

    2003-09-26

    Delayed coking evolved steadily over the early to mid 1900s to enable refiners to convert high boiling, residual petroleum fractions to light products such as gasoline. Pound for pound, coking is the most energy intensive of any operation in a modern refinery. Large amounts of energy are required to heat the thick, poor-quality petroleum residuum to the 900 to 950 degrees F required to crack the heavy hydrocarbon molecules into lighter, more valuable products. One common misconception of delayed coking is that the product coke is a disadvantage. Although coke is a low valued (near zero economic value) byproduct, compared to transportation fuels, there is a significant worldwide trade and demand for coke as it is an economical fuel. Coke production has increased steadily over the last ten years, with further increases forecast for the foreseeable future. Current domestic production is near 111,000 tons per day. A major driving force behind this increase is the steady decline in crude quality available to refiners. Crude slates are expected to grow heavier with higher sulfur contents while environmental restrictions are expected to significantly reduce the demand for high-sulfur residual fuel oil. Light sweet crudes will continue to be available and in even greater demand than they are today. Refiners will be faced with the choice of purchasing light sweet crudes at a premium price, or adding bottom of the barrel upgrading capability, through additional new investments, to reduce the production of high-sulfur residual fuel oil and increase the production of low-sulfur distillate fuels. A second disadvantage is that liquid products from cokers frequently are unstable, i.e., they rapidly form gum and sediments. Because of intermediate investment and operating costs, delayed coking has increased in popularity among refiners worldwide. Based on the 2000 Worldwide Refining Survey published in the Oil and Gas, the delayed coking capacity for 101 refineries around the world

  17. Mozambique becomes a major coking coal exporter?

    SciTech Connect (OSTI)

    Ruffini, A.

    2008-06-15

    In addition to its potential role as a major international supplier of coking coal, Mozambique will also become a major source of power generation for southern Africa. 3 figs.

  18. Fundamentals of Delayed Coking Joint Industry Project

    SciTech Connect (OSTI)

    Michael Volk; Keith Wisecarver

    2004-09-26

    Delayed coking evolved steadily over the early to mid 1900s to enable refiners to convert high boiling, residual petroleum fractions to light products such as gasoline. Pound for pound, coking is the most energy intensive of any operation in a modern refinery. Large amounts of energy are required to heat the thick, poor-quality petroleum residuum to the 900 to 950 degrees F required to crack the heavy hydrocarbon molecules into lighter, more valuable products. One common misconception of delayed coking is that the product coke is a disadvantage. Although coke is a low valued (near zero economic value) byproduct, compared to transportation fuels, there is a significant worldwide trade and demand for coke as it is an economical fuel. Coke production has increased steadily over the last ten years, with further increases forecast for the foreseeable future. Current domestic production is near 111,000 tons per day. A major driving force behind this increase is the steady decline in crude quality available to refiners. Crude slates are expected to grow heavier with higher sulfur contents while environmental restrictions are expected to significantly reduce the demand for high-sulfur residual fuel oil. Light sweet crudes will continue to be available and in even greater demand than they are today. Refiners will be faced with the choice of purchasing light sweet crudes at a premium price, or adding bottom of the barrel upgrading capability, through additional new investments, to reduce the production of high-sulfur residual fuel oil and increase the production of low-sulfur distillate fuels. A second disadvantage is that liquid products from cokers frequently are unstable, i.e., they rapidly form gum and sediments. Because of intermediate investment and operating costs, delayed coking has increased in popularity among refiners worldwide. Based on the 2000 Worldwide Refining Survey published in the Oil and Gas, the delayed coking capacity for 101 refineries around the world

  19. Demand for superpremium needle cokes on upswing

    SciTech Connect (OSTI)

    Acciarri, J.A.; Stockman, G.H. )

    1989-12-01

    The authors discuss how recent supply shortages of super-premium quality needle cokes, plus the expectation of increased shortfalls in the future, indicate that refiners should consider upgrading their operations to fill these demands. Calcined, super-premium needle cokes are currently selling for as much as $550/metric ton, fob producer, and increasing demand will continue the upward push of the past year. Needle coke, in its calcined form, is the major raw material in the manufacture of graphite electrodes. Used in steelmaking, graphite electrodes are the electrical conductors that supply the heat source, through arcing electrode column tips, to electric arc steel furnaces. Needle coke is commercially available in three grades - super premium, premium, and intermediate. Super premium is used to produce electrodes for the most severe electric arc furnace steelmaking applications, premium for electrodes destined to less severe operations, and intermediate for even less critical needs.

  20. Oil coking propensity under hydroprocessing conditions

    SciTech Connect (OSTI)

    Kriz, J.F. )

    1991-01-01

    If the processability of heavy or residual oil is assessed in terms of conversion to distillate oils, the tendency to form carbonaceous (coke) deposits in the reactor would impose limits on the operating conditions, since any significant coke accumulation on a continuing basis would be prohibitive. Experimentally, one can evaluate the feedstock coking propensity in a bench-scale reactor for a set of typical hydroprocessing conditions by varying the temperature near the threshold of coking. For a number of different feedstocks examined by this method, an empirical function can be found correlating the coking propensity with some of the characteristic properties determined by routine analyses. The present approach used a combination of physical and chemical properties including density and contents of Conradson Carbon residue, pentane and toluene insolubles, fraction of high-boiling pitch, and carbon, hydrogen, nitrogen, sulfur and ash. Feedstocks were chosen to cover a wide but practical range of properties to establish their impact on the coking propensity. Although these relationships apply to thermal hydroprocessing, the role of catalysts is also indicated.

  1. Unmanned operation of the coke guides at Hoogovens IJmuiden Coke Plant 1

    SciTech Connect (OSTI)

    Vos, D.; Mannes, N.; Poppema, B.

    1995-12-01

    Due to the bad condition of batteries and many ovens under repair, Hoogovens was forced to partially repair and rebuild the Coke plant No. 1. The production of coke at Coke plant No. 1 is realized in 3 production blocks subdivided in 6 batteries. Besides a renovated installation, all coke oven machines were renewed. A total of five identical machine sets are available. Each consists of a pusher machine, larry car, coke guide and quench car with diesel locomotive. A complete automated control system was implemented. The main objectives were a highly regular coking and pushing process, automated traveling and positioning and a centrally coordinated interlocking of machine functions. On each operational machine however an operator performed the supervisory control of the automated machine functions. After years of good experience with the automated system, economical reasons urged further personnel reduction from 1994 on. Totally 375 people were involved, including the maintenance department. To reduce the occupation at coke plant No. 1, the coke guide was the first machine to be fully automated because of the isolated and uncomfortable working place.

  2. Review of a Proposed Quarterly Coal Publication

    SciTech Connect (OSTI)

    Not Available

    1981-01-01

    This Review of a Proposed Quartery Coal Publication contains findings and recommendations regarding the content of a new summary Energy Information Administration (EIA) coal and coke publication entitled The Quarterly Coal Review (QCR). It is divided into five sections: results of interviews with selected EIA data users; identification of major functions of the coal and coke industries; analysis of coal and coke data collection activities; evaluation of issues conerning data presentation including recommendations for the content of the proposed QCR; and comparison of the proposed QCR with other EIA publications. Major findings and recommendations are as follows: (1) User interviews indicate a definite need for a compehensive publication that would support analyses and examine economic, supply and demand trends in the coal industry; (2) the organization of the publication should reflect the natural order of activities of the coal and coke industries. Based on an analysis of the industries, these functions are: production, stocks, imports, exports, distribution, and consumption; (3) current EIA coal and coke surveys collect sufficient data to provide a summary of the coal and coke industries on a quarterly basis; (4) coal and coke data should be presented separately. Coke data could be presented as an appendix; (5) three geographic aggregations are recommended in the QCR. These are: US total, coal producing districts, and state; (6) coal consumption data should be consolidated into four major consumer categories: electric utilities, coke plants, other industrial, and residential commercial; (7) several EIA publications could be eliminated by the proposed QCR.

  3. Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Publications Publications Official releases of Richard P. Feynman Center for Innovation publications General Inquiries Richard P. Feynman Center for Innovation (505) 665-9090 Email All years denote Fiscal Years. Progress Report FY14 FCI Progress Report 2014 (pdf) 2013 (pdf) 2011-2012 (pdf) 2009-2010 (pdf) 2007-2008 (pdf) 2005-2006 (pdf) 2004 (pdf) outSTANDING innOVATION Awards After 2011, the outSTANDING innOVATION Awards booklet and Progress Report were combined into a single publication. FY11

  4. The correlation between reactivity and ash mineralogy of coke

    SciTech Connect (OSTI)

    Kerkkonen, O.; Mattila, E.; Heiniemi, R.

    1996-12-31

    Rautaruukki is a modern integrated Finnish steel works having a production of 2.4 mil. t/year of flat products. The total fuel consumption of the two blast furnaces in 1994 was 435 kg/t HM. Coke used was 345 kg/t HM and oil injection was 90 kg/t HM. The coking plant was taken in to operation in 1987 and is the only one in Finland, which means that the coking tradition is very short. Coke production is 0.9 mil. t/year. The coking blends include 70--80% medium volatile coals having a wide range of total dilatation. From time to time disturbances in the operation of the blast furnaces have occurred in spite of the fact that the reactivity of the coke used has remained constant or even decreased. It was thought necessary to investigate the factors affecting coke reactivity, in order to better understand the results of the reactivity test. This paper deals with carbonization tests done in a 7 kg test oven using nine individual coals having volatile-matter contents of 17--36% (dry) and seven blends made from these coals. Coke reactivity with CO{sub 2} at 1100 C (CRI) and coke strength after reaction (CSR) were determined using the test developed by the Nippon Steel Corporation. The influence of coke carbon form, porosity and especially ash mineralogy on the coke reactivity were examined. The effects of some additives; petroleum coke (pet coke), the spillage material from the coke ovens and oxidized coal, on coke quality were also studied. Typical inorganic minerals found in coals were added to one of the high volatile coals, which was then coked to determine the affect of the minerals on the properties of the coke produced.

  5. Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    publications Publications JLF Science Publications JLF Facility-related Publications JLF Highlights

  6. Rheology of petroleum coke-water slurry

    SciTech Connect (OSTI)

    Prasad, M.; Mall, B.K.; Mukherjee, A.

    1998-04-01

    This paper reports the results of the studies carried out on the optimization of particle size distribution, the theological characteristics and stability of highly loaded petroleum coke-water slurry using three additives. The solids loading achieved in the slurries were in the range of 65% to 75.6% depending on the additives used. Slurry viscosity varied between 267 to 424 mPas at 128 s{sup -1} shear rate. The petroleum coke-water slurries exhibited pseudoplastic characteristics with yield tending towards Bingham plastic as the solids loading progressively increased.

  7. DOE Publishes Notice of Public Meeting and Availability of the Framework Document for General Service Lamps Energy Conservation Standards

    Broader source: Energy.gov [DOE]

    The Department of Energy has published a Federal Register notice of public meeting and availability of the framework document regarding energy conservation standards for general service lamps.

  8. Metal and coke deactivation of resid hydroprocessing catalysts

    SciTech Connect (OSTI)

    Bartholdy, J.; Cooper, B.

    1993-12-31

    It is well established that residuum hydroprocessing catalysts are deactivated by both coke and metals. The traditional approach has been to relate the initial rapid deactivation with coke laydown and subsequent deactivation with deposition of metals from the residuum. This paper presents evidence of coke and metals deactivation throughout the life of the catalyst. By comparing tests made at constant temperature with tests made at constant conversion it is concluded that the extent of coke deactivation in related to the operating temperature. The extent of coke deactivation has further been estimated by regeneration of a fraction of the catalyst bed.

  9. Reducing dust emissions at OAO Alchevskkoks coke battery 10A

    SciTech Connect (OSTI)

    T.F. Trembach; E.N. Lanina

    2009-07-15

    Coke battery 10A with rammed batch is under construction at OAO Alchevskkoks. The design documentation developed by Giprokoks includes measures for reducing dust emissions to the atmosphere. Aspiration systems with dry dust trapping are employed in the new components of coke battery 10A and in the existing coke-sorting equipment. Two-stage purification of dusty air in cyclones and bag filters is employed for the coke-sorting equipment. This system considerably reduces coke-dust emissions to the atmosphere.

  10. Petroleum coke: A viable fuel for power generation

    SciTech Connect (OSTI)

    Dymond, R.E.

    1995-09-01

    As the power generation industry struggles to meet the seemingly divergent goals of reduced emissions and increased electricity demand during the 1990s, petroleum coke`s use as a low cost BTU source should be seriously considered. Since this material is produced at petroleum refineries-thus affected by variables unfamiliar to most power generators-industry participants often do not understand what forces drive coke markets. This article will address these forces and provide some insight about petroleum coke`s future as a viable fuel for power generation.

  11. Petroleum coke: A viable fuel for power generation

    SciTech Connect (OSTI)

    Dymond, R.E.

    1994-12-31

    As the power generation industry struggles to meet the seemingly divergent goals of reduced emissions and increased electricity demand during the 1990s, petroleum coke`s use as a low cost BTU source should be seriously considered. since this material is produced at petroleum refineries - thus affected by variables unfamiliar to most power generators - industry participants often do not understand what forces drive coke markets. This article will address these forces and provide some insight about petroleum coke`s future as a viable fuel for power generation.

  12. Residuum conversion using hydroprocessing with delayed coking

    SciTech Connect (OSTI)

    Wilson, J.R.

    1985-01-01

    Chevron's Pascagoula Resid Conversion Project utilizes a combination of hydroprocessing and delayed coking. In conjunction with existing process units, this conversion capacity gives the Pascagoula Refinery flexibility to meet the light product demands while processing heavier and lower valued crude oils. Design concepts and considerations into the final process selection are discussed.

  13. Fundamentals of Delayed Coking Joint Industry Project

    SciTech Connect (OSTI)

    Michael Volk Jr; Keith Wisecarver

    2005-10-01

    Delayed coking evolved steadily over the early to mid 1900s to enable refiners to convert high boiling, residual petroleum fractions to light products such as gasoline. Pound for pound, coking is the most energy intensive of any operation in a modern refinery. Large amounts of energy are required to heat the thick, poor-quality petroleum residuum to the 900 to 950 degrees F required to crack the heavy hydrocarbon molecules into lighter, more valuable products. One common misconception of delayed coking is that the product coke is a disadvantage. Although coke is a low valued (near zero economic value) byproduct, compared to transportation fuels, there is a significant worldwide trade and demand for coke as it is an economical fuel. Coke production has increased steadily over the last ten years, with further increases forecast for the foreseeable future. Current domestic production is near 111,000 tons per day. A major driving force behind this increase is the steady decline in crude quality available to refiners. Crude slates are expected to grow heavier with higher sulfur contents while environmental restrictions are expected to significantly reduce the demand for high-sulfur residual fuel oil. Light sweet crudes will continue to be available and in even greater demand than they are today. Refiners will be faced with the choice of purchasing light sweet crudes at a premium price, or adding bottom of the barrel upgrading capability, through additional new investments, to reduce the production of high-sulfur residual fuel oil and increase the production of low-sulfur distillate fuels. A second disadvantage is that liquid products from cokers frequently are unstable, i.e., they rapidly form gum and sediments. Because of intermediate investment and operating costs, delayed coking has increased in popularity among refiners worldwide. Based on the 2000 Worldwide Refining Survey published in the Oil and Gas, the delayed coking capacity for 101 refineries around the world

  14. RESIDUA UPGRADING EFFICIENCY IMPROVEMENT MODELS: COKE FORMATION PREDICTABILITY MAPS

    SciTech Connect (OSTI)

    John F. Schabron; A. Troy Pauli; Joseph F. Rovani Jr.

    2002-05-01

    The dispersed particle solution model of petroleum residua structure was used to develop predictors for pyrolytic coke formation. Coking Indexes were developed in prior years that measure how near a pyrolysis system is to coke formation during the coke formation induction period. These have been demonstrated to be universally applicable for residua regardless of the source of the material. Coking onset is coincidental with the destruction of the ordered structure and the formation of a multiphase system. The amount of coke initially formed appears to be a function of the free solvent volume of the original residua. In the current work, three-dimensional coke make predictability maps were developed at 400 C, 450 C, and 500 C (752 F, 842 F, and 932 F). These relate residence time and free solvent volume to the amount of coke formed at a particular pyrolysis temperature. Activation energies for two apparent types of zero-order coke formation reactions were estimated. The results provide a new tool for ranking residua, gauging proximity to coke formation, and predicting initial coke make tendencies.

  15. Model based control of a coke battery

    SciTech Connect (OSTI)

    Stone, P.M.; Srour, J.M.; Zulli, P.; Cunningham, R.; Hockings, K.

    1997-12-31

    This paper describes a model-based strategy for coke battery control at BHP Steel`s operations in Pt Kembla, Australia. The strategy uses several models describing the battery thermal and coking behavior. A prototype controller has been installed on the Pt Kembla No. 6 Battery (PK6CO). In trials, the new controller has been well accepted by operators and has resulted in a clear improvement in battery thermal stability, with a halving of the standard deviation of average battery temperature. Along with other improvements to that battery`s operations, this implementation has contributed to a 10% decrease in specific battery energy consumption. A number of enhancements to the low level control systems on that battery are currently being undertaken in order to realize further benefits.

  16. Cyanide treatment options in coke plants

    SciTech Connect (OSTI)

    Minak, H.P.; Lepke, P.

    1997-12-31

    The paper discusses the formation of cyanides in coke oven gas and describes and compares waste processing options. These include desulfurization by aqueous ammonia solution, desulfurization using potash solution, desulfurization in oxide boxes, decomposition of NH{sub 3} and HCN for gas scrubbing. Waste water treatment methods include chemical oxidation, precipitation, ion exchange, reverse osmosis, and biological treatment. It is concluded that biological treatment is the most economical process, safe in operation and requires a minimum of manpower.

  17. Improvement of coke quality by utilization of hydrogenation residue

    SciTech Connect (OSTI)

    Meckel, J.F. ); Wairegi, T. )

    1993-01-01

    Hydrogenation residue is the product left over when petroleum residue feedstocks (or coal) are treated by, e.g. the Veba Combi Cracking (VCC) process. Many tests in semitechnical and full-sized coke ovens were carried out with hydrogenation residue (HR) as an additive in coking coal blends for the production of blast furnace coke or foundry coke. The results of the investigations reported in this paper demonstrate that HR is a very promising alternative for enlarging the coking coal basis compared to other processes or the use of other additives. The application of HR on an industrial scale did not indicate any negative impact on the handling of the hydrogenation residue or on the operation of the coke oven battery.

  18. Petroleum-derived additive reduces coke on hydrotreating catalyst

    SciTech Connect (OSTI)

    Not Available

    1993-12-27

    Upgrading heavy oils is becoming increasingly important as the world crude slate gets heavier and demand for light products increases. But most upgrading processes must contend with problems related to coke formation during hydrotreating. Three researchers have found that materials having high radical-scavenging ability can reduce coke formation when applied to hydrotreating heavy oils. And these materials can be produced from heavy petroleum fractions. The paper discusses coke formation, the research program, and the pilot plant.

  19. Development of an Advanced Combined Heat and Power (CHP) System Utilizing Off-Gas from Coke Calcination

    Broader source: Energy.gov [DOE]

    Coke calcination is a process that involves the heating of green petroleum coke in order to remove volatile material and purify the coke for further processing. Calcined coke is vital to the...

  20. Lime addition to heavy crude oils prior to coking

    SciTech Connect (OSTI)

    Kessick, M. A.; George, Z. M.; Schneider, L. G.

    1985-06-04

    The sulphur emissive capability, on combustion, of coke which is formed during upgrading of sulphur-containing heavy crude oils, including oil sands bitumen, or residua is decreased by the addition of slaked lime or calcium oxide to the heavy crude oil prior to coking. The presence of the slaked lime or calcium oxide leads to an increased yield of liquid distillates at coking temperatures of about 450/sup 0/ to about 500/sup 0/ C. Ash remaining after combustion of the coke may be leached to recover nickel and vanadium values therefrom.

  1. Petroleum coke as a clean and reliable boiler fuel

    SciTech Connect (OSTI)

    Molen, R.V.

    1994-12-31

    Petroleum coke is the solid residue left over after all valuable liquid and gaseous components have been extracted from crude oil. A typical integrated refinery flowsheet when a coker is used is illustrated. Coking is a process which {open_quotes}removes{close_quotes} excess carbon from the crude in order to obtain a better carbon-to-hydrogen ratio as required by refineries to produce the balance of products presently demanded by the marketplace. Three basic types of cokers exists. The current production from these is shown. Most delayed cokers use a batch operation in which the coke forms a layer on the walls and is usually removed by hydroblasting after processing of the batch. This coke is therefore sized irregularly and must be crushed prior to use. Another form of delayed coking, also a batch process, results in {open_quotes}shot{close_quotes} coke which looks like multi-sized BB`s. Delayed cokes are by far the largest produced cokes. A distant second in production is fluid coke which is produced in a continuous process fluidized bed. The rarely produced flexicoke comes from an entrained bed reactor.

  2. Nippon Coke and Engineering Sumitomo Corp JV | Open Energy Information

    Open Energy Info (EERE)

    navigation, search Name: Nippon Coke and Engineering & Sumitomo Corp JV Place: Tokyo, Japan Zip: 135-6007 Product: Japan-based natural graphite base anode materials joint...

  3. Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    work. Today at Berkeley Lab: : The daily newsletter for our employees and collaborators. Publications.lbl.gov: : Over 75,000 of our laboratory's scientific publications,...

  4. 2015-01-26 Issuance: Energy Conservation Standards for General Service Lamps; Extension of Public Comment Period

    Broader source: Energy.gov [DOE]

    This document is a pre-publication Federal Register extension of comment period regarding energy conservation standards for general service lamps, as issued by the Deputy Assistant Secretary for Energy Efficiency on January 26, 2015. Though it is not intended or expected, should any discrepancy occur between the document posted here and the document published in the Federal Register, the Federal Register publication controls. This document is being made available through the Internet solely as a means to facilitate the public's access to this document.

  5. System to acquire and monitor operating machinery positions for horizontal coke oven batteries

    SciTech Connect (OSTI)

    Bierbaum, D.; Teschner, W.

    1980-02-26

    In a horizontal coke oven battery with at least one coke receiving device movable along one longitudinal side of the battery and at least one coke driving device movable along an opposite longitudinal side of the battery, an apparatus is disclosed for determining the relative position of the coke receiving device with respect to the coke driving device and for activating the coke driving device when its position corresponds with that of the coke receiving device. A first wheel is mounted on the coke receiving device for rotation with the movement of the coke receiving device, a first angle encoder is connected to the first wheel for producing a first signal corresponding to the location of the first wheel and the position of the coke receiving device along the coke oven, and an input storage in the form of a magnetic disc is connected to the first angle encoder for recording and storing the signal. A second wheel is mounted on the coke driving device for rotation with the movement of the coke driving device and a second angle encoder is connected thereto for producing a second signal which corresponds to the rotation of the second wheel and the position of the coke driving device along the coke oven. A comparator is connected to the second signal encoder for receiving the second signal and a data link is provided between the comparator and the input storage of the coke receiving device so that the first signal from the coke receiving device can be impressed on the comparator. An activator is connected to the comparator for activating the coke driving device when the first signal corresponds to the second signal indicating a corresponding positional relationship between the coke receiving device and the coke driving device.

  6. Table 21. U.S. Coke Imports

    U.S. Energy Information Administration (EIA) Indexed Site

    1. U.S. Coke Imports (short tons) Year to Date Continent and Country of Origin January - March 2016 October - December 2015 January - March 2015 2016 2015 Percent Change North America Total 2,763 52,115 2,035 2,763 2,035 35.8 Canada 2,763 52,115 2,035 2,763 2,035 35.8 Europe Total 1,056 1,156 14 1,056 14 NM Austria - 3 - - - - France - 23 - - - - Germany, Federal Republic of - - 11 - 11 - Italy 1,043 976 - 1,043 - - Spain - 141 - - - - United Kingdom 13 13 3 13 3 333.3 Asia Total 457 326 954 457

  7. RESIDUA UPGRADING EFFICIENCY IMPROVEMENT MODELS: WRI COKING INDEXES

    SciTech Connect (OSTI)

    John F. Schabron; Joseph F. Rovani, Jr.; Francis P. Miknis; Thomas F. Turner

    2003-06-01

    Pyrolysis experiments were conducted with three residua at 400 C (752 F) at various residence times. The wt % coke and gaseous products were measured for the product oils. The Western Research Institute (WRI) Coking Indexes were determined for the product oils. Measurements were made using techniques that might correlate with the Coking Indexes. These included spin-echo proton nuclear magnetic resonance spectroscopy, heat capacity measurements at 280 C (536 F), and ultrasonic attenuation. The two immiscible liquid phases that form once coke formation begins were isolated and characterized for a Boscan residuum pyrolyzed at 400 C (752 F) for 55 minutes. These materials were analyzed for elemental composition (CHNS), porphyrins, and metals (Ni,V) content.

  8. New process to avoid emissions: Constant pressure in coke ovens

    SciTech Connect (OSTI)

    Giertz, J.; Huhn, F.; Hofherr, K.

    1995-12-01

    A chamber pressure regulation (PROven), especially effective in regard to emission control problems of coke ovens is introduced for the first time. Because of the partial vacuum in the collecting main system, it is possible to keep the oven`s raw gas pressure constant on a low level over the full coking time. The individual pressure control for each chamber is assured directly as a function of the oven pressure by an immersion system controlling the flow resistance of the collecting main valve. The latter is a fixed-position design (system name ``FixCup``). By doing away with the interdependence of collecting main pressure and chamber pressure, a parameter seen as a coking constant could not be made variable. This opens a new way to reduce coke oven emissions and simultaneously to prevent the ovens from damage caused by air ingress into the oven.

  9. Methods for retarding coke formation during pyrolytic hydrocarbon processing

    SciTech Connect (OSTI)

    Not Available

    1993-06-22

    A method is described for inhibiting the formation and deposition of pyrolytic coke on the heated metal surfaces in contact with a hydrocarbon feedstock which is undergoing pyrolytic processing to produce lower hydrocarbon fractions and said metal surfaces having a temperature of about 1,400 F or higher, consisting essentially of adding to said hydrocarbon feedstock being pyrolytically processed a coke inhibiting amount of hydroquinone.

  10. Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Publications Engineering Institute Publications Publications are organized by topic. Contact Institute Director Charles Farrar (505) 663-5330 Email UCSD EI Director Michael Todd (858) 534-5951 Professional Staff Assistant Ellie Vigil (505) 667-2818 Email Administrative Assistant Rebecca Duran (505) 665-8899 Email Model Verification and Validation Sensor and Sensing Technologies Structural Health Monitoring Earthquake Engineering and Structural Dynamics Damage Prognosis Other Publications Book

  11. Selected Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    publications

  12. Selected Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    publications /

  13. Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Publications Proud Legacy, Bold Future, Since 1943 Publications Los Alamos publications demonstrate the Lab's enduring commitment to researching and applying the best science, engineering and technology in order to meet the challenges facing our country and society in the 21st century. NEW ISSUE: 1663 JULY 2016 July 2016 The Brief Lives of Neutrons Turmoil at the Top of the World Not Magic...Quantum Breaking the Bond Ripples in Space and Time Small Fusion Could be Huge Muon Mission in Tuscany

  14. Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    GCPCC's collaboration and publication policy Beamline acknowledgement Publication List Please contact us when you have a publication resulting from work done at the GCPCC PX beamline. Miller MD, Phillips GN Jr., White MA, Fox RO, Craft BC III The development of the GCPCC Protein Crystallography Beamline at CAMD. Application of Accelerators in Research and Industry -- Sixteenth Int'l Conf., J.L. Duggan and I.L. Morgan eds., 734-737 (2001). {PDF} Qiu C, Tarrant MK, Choi SH, Sathyamurthy A, Bose R,

  15. Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Book Chapters and Other Publications Book Chapters and Other Publications Contact Institute Director Charles Farrar (505) 663-5330 Email UCSD EI Director Michael Todd (858) 534-5951 Professional Staff Assistant Ellie Vigil (505) 667-2818 Email Administrative Assistant Rebecca Duran (505) 665-8899 Email Book Chapters C. J. Stull, F. M. Hemez and C. R. Farrar, "On Assessing the Robustness of Structural Health Monitoring Technologies," Topics in Model Validation and Uncertainty

  16. Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Model Verification and Validation Model Verification and Validation Publications Publications are organized by topic. Contact Institute Director Charles Farrar (505) 663-5330 Email UCSD EI Director Michael Todd (858) 534-5951 Professional Staff Assistant Jutta Kayser (505) 663-5649 Email Administrative Assistant Stacy Baker (505) 663-5233 Email Decision-Making for Science-Based Predictive Modeling Atamturktur, H.S., Egeberg, M.C., Hemez, F.M., Stevens, G.N., "Defining Coverage of an

  17. Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Structural Health Monitoring Structural Health Monitoring Publications Publications are organized by topic. Contact Institute Director Charles Farrar (505) 663-5330 Email UCSD EI Director Michael Todd (858) 534-5951 Professional Staff Assistant Ellie Vigil (505) 667-2818 Email Administrative Assistant Rebecca Duran (505) 665-8899 Email Structural Health Monitoring is the process of implementing a damage detection strategy for aerospace, civil and mechanical engineering infrastructure is referred

  18. The evaluation of the Nippon Steel Corporation reactivity and post-reaction-strength test for coke

    SciTech Connect (OSTI)

    Not Available

    1980-12-01

    A systematic investigation was made of the factors influencing the reactivity of coke, including test temperature, coke structural properties, mineral inclusions and additives, and the inert content of the charge.

  19. Table 7.8 Coke Overview, 1949-2011 (Thousand Short Tons)

    U.S. Energy Information Administration (EIA) Indexed Site

    ... Sources: * 1949-1975Bureau of Mines, Minerals Yearbook, "Coke and Coal Chemicals" chapter. * 1976-1980U.S. Energy Information Administration (EIA), Energy Data Report, Coke and ...

  20. Selected translated abstracts of Russian-language climate-change publications. 4: General circulation models

    SciTech Connect (OSTI)

    Burtis, M.D.; Razuvaev, V.N.; Sivachok, S.G.

    1996-10-01

    This report presents English-translated abstracts of important Russian-language literature concerning general circulation models as they relate to climate change. Into addition to the bibliographic citations and abstracts translated into English, this report presents the original citations and abstracts in Russian. Author and title indexes are included to assist the reader in locating abstracts of particular interest.

  1. Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the corresponding structural response is measured by the same excitation source. These sensoractuators are inexpensive, generally require low power, and are non-intrusive....

  2. New packing in absorption systems for trapping benzene from coke-oven gas

    SciTech Connect (OSTI)

    V.V. Grabko; V.M. Li; T.A. Shevchenko; M.A. Solov'ev

    2009-07-15

    The efficiency of benzene removal from coke-oven gas in absorption units OAO Alchevskkoks with new packing is assessed.

  3. Study on rheological characteristics of petroleum coke residual oil slurry

    SciTech Connect (OSTI)

    Shou Weiyi; Xu Xiaoming; Cao Xinyu

    1997-07-01

    We have embarked on a program to develop petroleum coke residual oil slurry (POS) as an alternative fuel for existing oil-fired boilers. The industrial application of petroleum coke residual oil slurry requires full knowledge of its flow behavior. This paper will present the results of an experimental investigation undertaken to study the Theological properties using a rotating viscometer at shear rate up to 996 s{sup -1}. The effects of temperature, concentration, particle size distribution and additives are also investigated. The experiments show that petroleum coke residual oil slurry exhibits pseudoplastic behavior, which has favorable viscosity property under a certain condition and has broad prospect to be applied on oil-fired boilers.

  4. Problems of organizing zero-effluent production in coking plants

    SciTech Connect (OSTI)

    Maiskii, S.V.; Kagasov, V.M.

    1981-01-01

    The basic method of protecting the environment against pollution by coking plants in the future must be the organization of zero-waste production cycles. Problems associated with the elimination of effluent are considered. In the majority of plants at present, the phenolic effluent formed during coal carbonization and chemical product processing is completely utilized within the plant as a coke quenching medium (the average rate of phenolic effluent formation is 0.4 m/sup 3//ton of dry charge, which equals the irrecoverable water losses in coke quenching operations). However, the increasing adoption of dry coke cooling is inevitably associated with increasing volumes of surplus effluent which cannot be disposed of in coke quenching towers. As a result of experiments it was concluded that: 1. The utilization of phenolic effluent in closed-cycle watercooling systems does not entirely solve the effluent disposal problem. The volume of surplus effluent depends on the volume originally formed, the rate of consuming water in circulation and the time of year. In order to dispose of surplus effluent, wet quenching must be retained for a proportion of the coke produced. 2. The greatest hazards in utilizing phenolic effluent in closed-cycle watercooling systems are corrosion and the build-up of suspended solids. The water must be filtered and biochemically purified before it is fed into the closed-cycle watercooling systems. The total ammonia content after purification should not exceed 100 to 150 mg/l. 3. Stormwater and thawed snow can be used in closed-cycle water supply systems after purification. 4. The realization of zero-effluent conditions in existing plants will require modifications to the existing water supply systems.

  5. A coke oven model including thermal decomposition kinetics of tar

    SciTech Connect (OSTI)

    Munekane, Fuminori; Yamaguchi, Yukio; Tanioka, Seiichi

    1997-12-31

    A new one-dimensional coke oven model has been developed for simulating the amount and the characteristics of by-products such as tar and gas as well as coke. This model consists of both heat transfer and chemical kinetics including thermal decomposition of coal and tar. The chemical kinetics constants are obtained by estimation based on the results of experiments conducted to investigate the thermal decomposition of both coal and tar. The calculation results using the new model are in good agreement with experimental ones.

  6. Table 38. Coal Stocks at Coke Plants by Census Division

    Gasoline and Diesel Fuel Update (EIA)

    Coal Stocks at Coke Plants by Census Division (thousand short tons) U.S. Energy Information Administration | Quarterly Coal Report, April - June 2014 Table 38. Coal Stocks at Coke Plants by Census Division (thousand short tons) U.S. Energy Information Administration | Quarterly Coal Report, April - June 2014 Census Division June 30, 2014 March 31, 2014 June 30, 2013 Percent Change (June 30) 2014 versus 2013 Middle Atlantic 547 544 857 -36.2 East North Central 1,130 963 1,313 -13.9 South

  7. Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Damage Prognosis Publications-Damage Prognosis Journal articles for the topic Damage Prognosis. Contact Institute Director Charles Farrar (505) 663-5330 Email UCSD EI Director Michael Todd (858) 534-5951 Professional Staff Assistant Ellie Vigil (505) 667-2818 Email Administrative Assistant Rebecca Duran (505) 665-8899 Email Journal articles Gabbatto, M., Conte, J, Kosmatka, J. Farrar, C. R., "Reliability-Based Framework for Fatigue Damage Prognosis of Composite Aircraft Structures,"

  8. Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Earthquake Engineering and Structural Dynamics Earthquake Engineering and Structural Dynamics Publications Journal articles are organized by date. Contact Institute Director Charles Farrar (505) 663-5330 Email UCSD EI Director Michael Todd (858) 534-5951 Professional Staff Assistant Ellie Vigil (505) 667-2818 Email Administrative Assistant Rebecca Duran (505) 665-8899 Email Journal articles D. Mascarenas, D. Macknelly, J. Mullins, H. Wiest and G. Park, "Dynamic characterization of satellite

  9. Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Los Alamos Reports Los Alamos Reports Unless identified as SRD (Secret Restricted Data), these reports are available to the public from the National Technical Information Service, Springfield, VA. Contact Institute Director Charles Farrar (505) 663-5330 Email UCSD EI Director Michael Todd (858) 534-5951 Professional Staff Assistant Ellie Vigil (505) 667-2818 Email Administrative Assistant Rebecca Duran (505) 665-8899 Email Los Alamos Reports E. Figueiredo, G. Park, J. Figueiras, C. R. Farrar,

  10. Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sensors and Sensing Technologies Sensors and Sensing Technologies Publications Journal articles on Sensors and Sensing Technologies Contact Institute Director Charles Farrar (505) 663-5330 Email UCSD EI Director Michael Todd (858) 534-5951 Professional Staff Assistant Ellie Vigil (505) 667-2818 Email Administrative Assistant Rebecca Duran (505) 665-8899 Email Journal Articles Stull, C.J., Taylor, S. G., Wren, J., Mascarenas, D.L., Farrar, C. R., "Real-Time Condition Assessment of the Raptor

  11. Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Directed Organization of Functional Materials at Inorganic-Macromolecular Interfaces Recent Publications R. Tunuguntla, M. Bangar, K. Kim, P. Stroeve, C.M. Ajo-Franklin, A. Noy, "Lipid Bilayer Composition can Influence the Orientation of Proteorhodopsin in Artificial Membranes", Biophys. J., accepted (2013) A. Noy "Kinetic model of gas transport in carbon nanotube channels", The Journal of Physical Chemistry C 117, 7656 (2013) A. Noy, R.W. Friddle "Practical single

  12. A coke/soot formation model for multiphase reacting flow simulation

    SciTech Connect (OSTI)

    Chang, S.L.; Lottes, S.A.; Petrick, M.; Zhou, C.Q. |

    1997-03-01

    Coke is a by-product in petroleum fluid catalytic cracking (FCC) processes. The concentration of coke in an FCC riser reactor is a critical parameter used to evaluate the riser performance. A coke formation and transport model was developed. It was incorporated into a computational fluid dynamic (CFD) computer code, ICRKFLO, to simulate the coke formation processes in an FCC riser reactor. Based on a similar process, a soot formation model can be derived from the coke formation model and used for diesel combustion processes, where soot is emitted as one of the primary pollutants.

  13. Formation of coke from heavy crude oils in the presence of calcium carbonate

    SciTech Connect (OSTI)

    Kessick, M. A.; George, Z. M.; Schneider, L. G.

    1985-06-04

    The sulphur emissive capability, on combustion, of coke which is formed during upgrading of sulphur-containing heavy crude oils, including oil sands bitumen, and residua, is decreased by the addition of calcium carbonate, preferably in the form of limestone, to the heavy crude oil prior to coking. The presence of the limestone leads to an increased yield of liquid distillates from the coking process under preferred coking conditions. Ash remaining after combustion of the coke may be leached to recover nickel and vanadium values therefrom.

  14. Process for converting coal into liquid fuel and metallurgical coke

    DOE Patents [OSTI]

    Wolfe, Richard A.; Im, Chang J.; Wright, Robert E.

    1994-01-01

    A method of recovering coal liquids and producing metallurgical coke utilizes low ash, low sulfur coal as a parent for a coal char formed by pyrolysis with a volatile content of less than 8%. The char is briquetted and heated in an inert gas over a prescribed heat history to yield a high strength briquette with less than 2% volatile content.

  15. Use of a scale model for coke oven charging practice development

    SciTech Connect (OSTI)

    Case, E.R.; Pendergras, S.T.

    1982-01-01

    A 1/8 scale model coke oven was designed and built for use as a tool to improve coke oven charging practice. Major goals of the program were to increase coke oven productivity and decrease charging emissions. The material used to simulate coal in the model was chosen on the basis of angle of repose. the proper choice of media to simulate the coke oven charge, under a given set of operating conditions, was essential to obtain correspondence between the model and the production oven. Oven profiles were very similar after individual larry car hoppers were dropped and after leveling. Improved coke oven charging practices developed with the coke oven model, in combination with close control by operating personnel, have resulted in increased coke oven charge weights of over 1.0 ton/oven without increased charging emissions.

  16. Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Fundamental Mechanisms of Transient States in Materials Quantified by DTEM Recent Publications N.D. Browning, M.A. Bonds, G.H. Campbell, J.E. Evans, T. LaGrange, K.L. Jungjohann, D.J. Masiel, J. McKeown, S. Mehraen, B.W. Reed, M. Santala, "Recent Developments in Dynamic Transmission Electron Microscopy," Current Opinion in Solid State and Materials Science, 16 [1] 23 - 30 (2012). Thomas LaGrange, Bryan W. Reed, Melissa Santala, Joseph McKeown, Andreas Kulovits, Jörg M. K. Wiezorek,

  17. An overview of crisis management in the coke industry

    SciTech Connect (OSTI)

    Saunders, D.A.

    1995-12-01

    Members of the American Coke and Coal Chemicals Institute (ACCCI), as responsible corporate citizens, have embraced the concepts of crisis management and progress down the various paths of planning and preparation, monitoring, media communications, community outreach, emergency response, and recovery. Many of the concepts outlined here reflect elements of crisis management guidelines developed by the Chemical Manufacturers Association (CMA). At a coke plant, crises can take the form of fires, chemical releases, labor strikes, feedstock supply disruptions, and excessive snowfall, just to name a few. The CMA defines a crisis as: ``an unplanned event that has the potential to significantly impact a company`s operability or credibility, or to pose a significant environment, economic or legal liability``; and crisis management as: ``those activities undertaken to anticipate or prevent, prepare for, respond to and recover from any incident that has the potential to greatly affect the way a company conducts its business.

  18. Integrated coke, asphalt and jet fuel production process and apparatus

    DOE Patents [OSTI]

    Shang, Jer Y.

    1991-01-01

    A process and apparatus for the production of coke, asphalt and jet fuel m a feed of fossil fuels containing volatile carbon compounds therein is disclosed. The process includes the steps of pyrolyzing the feed in an entrained bed pyrolyzing means, separating the volatile pyrolysis products from the solid pyrolysis products removing at least one coke from the solid pyrolysis products, fractionating the volatile pyrolysis products to produce an overhead stream and a bottom stream which is useful as asphalt for road pavement, condensing the overhead stream to produce a condensed liquid fraction and a noncondensable, gaseous fraction, and removing water from the condensed liquid fraction to produce a jet fuel-containing product. The disclosed apparatus is useful for practicing the foregoing process. the process provides a useful method of mass producing and jet fuels from materials such as coal, oil shale and tar sands.

  19. Development of advanced technology of coke oven gas drainage treatment

    SciTech Connect (OSTI)

    Higashi, Tadayuki; Yamaguchi, Akikazu; Ikai, Kyozou; Kamiyama, Hisarou; Muto, Hiroshi

    1996-12-31

    In April 1994, commercial-scale application of ozone oxidation to ammonia liquor (which is primarily the water condensing from coke oven gas) to reduce its chemical oxygen demand (COD) was started at the Nagoya Works of Nippon Steel Corporation. This paper deals with the results of technical studies on the optimization of process operating conditions and the enlargement of equipment size and the operating purification system.

  20. Low-coke rate operation under high PCI at Kobe No. 3 BF

    SciTech Connect (OSTI)

    Matsuo, Tadasu; Kanazuka, Yasuo; Hoshino, Koichi; Yoshida, Yasuo; Kitayama, Syuji; Ishiwaki, Shiro

    1997-12-31

    Kobe No. 3 blast furnace (BF) suffered tremendous damage when the Great Hanshin-Awaji Earthquake rocked the area on January 17, 1995. However, working as quickly as possible to dig out of the burden and rehabilitate various facilities, the company managed to restart the No. 3 BF on April 2. After the restart, which went smoothly, production was shifted into the low coke rate operation which was being promoted before the disaster. In October, 1995, only seven months after the restart, the nation record of 296 kg/t low coke rate could be achieved. Subsequently, in January, 1996, coke rate reached 290 kg/t and the low coke rate operation was renewed. Since that time the same level of coke rate has been maintained. The paper discusses how low coke rate operation was achieved.

  1. How to implement a quality program in a coking plant. The AHMSA experience

    SciTech Connect (OSTI)

    Reyes M, M.A.; Perez, J.L.; Garza, C. de la; Morales, M.

    1995-12-01

    AHMSA (Altos Hornos de Mexico) is the largest integrated Steel Plant in Mexico, with its 3.1 MMMT of Liquid Steel production program for 1995. AHMSA operates two coke plants which began operations in 1955 and 1976. Total coke monthly production capacity amounts to as much as 106,000 Metric Tons (MT). The coke plants working philosophy was discussed and established in 1986 as part of the Quality Improvement Program, where its ultimate goal is to give the best possible coke quality to its main client--the blast furnaces. With this goal in mind, a planned joint effort with their own coal mines was initiated. This paper deals with the implementation process of the Quality Program, and the results of this commitment at the coal mines, coke plants and blast furnaces. The coke quality improvement is shown since 1985 to 1994, as well as the impact on the blast furnace operation.

  2. The new Kaiserstuhl coking plant: The heating system -- Design, construction and initial operating experience

    SciTech Connect (OSTI)

    Strunk, J.

    1996-12-31

    At the end of 1992 the new coke plant Kaiserstuhl in Dortmund/Germany with presently the largest coke ovens world-wide started its production operation in close linkage to the Krupp-Hoesch Metallurgical Works after about 35 months construction time. This plant incorporating comprehensive equipment geared to improve environmental protection is also considered as the most modern coke plant of the world. The heating-system and first results of operation will be presented.

  3. Heating control methodology in coke oven battery at Rourkela Steel Plant

    SciTech Connect (OSTI)

    Bandyopadhyay, S.S.; Parthasarathy, L.; Gupta, A.; Bose, P.R.; Mishra, U.

    1996-12-31

    A methodology of heating control was evolved incorporating temperature data generated through infra-red sensor at quenching station and thermocouples specially installed in the gooseneck of coke oven battery No. 3 of RSP. Average temperature of the red-hot coke as pushed helps in diagnosis of the abnormal ovens and in setting the targeted battery temperature. A concept of coke readiness factor (Q) was introduced which on optimization resulted in lowering the specific heat consumption by 30 KCal/Kg.

  4. Operational improvements at Jewell Coal and Coke Company`s non-recovery ovens

    SciTech Connect (OSTI)

    Ellis, C.E.; Pruitt, C.W.

    1995-12-01

    Operational improvements at Jewell Coal and Coke Company over the past five years includes safety and environmental concerns, product quality, equipment availability, manpower utilization, and productivity. These improvements with Jewell`s unique process has allowed Jewell Coal and Coke Company to be a consistent, high quality coke producer. The paper briefly explains Jewell`s unique ovens, their operating mode, improved process control, their maintenance management program, and their increase in productivity.

  5. Using Coke Oven Gas in a Blast Furnace Saves Over $6 Million Annually at a Steel Mill (U.S. Steel Edgar Thompson Plant)

    SciTech Connect (OSTI)

    2000-12-01

    Like most steel companies, U.S. Steel (USS) had been using coke oven gas (COG), a by-product of coke manufacturing, as a fuel in their coke ovens, boilers, and reheat furnaces.

  6. Integration of stripping of fines slurry in a coking and gasification process

    DOE Patents [OSTI]

    DeGeorge, Charles W.

    1980-01-01

    In an integrated fluid coking and gasification process wherein a stream of fluidized solids is passed from a fluidized bed coking zone to a second fluidized bed and wherein entrained solid fines are recovered by a wet scrubbing process and wherein the resulting solids-liquid slurry is stripped to remove acidic gases, the stripped vapors of the stripping zone are sent to the gas cleanup stage of the gasification product gas. The improved stripping integration is particularly useful in the combination coal liquefaction process, fluid coking of bottoms of the coal liquefaction zone and gasification of the product coke.

  7. Use of selective oxidation of petroleum residue for production of low-sulfur coke

    SciTech Connect (OSTI)

    Hairudinov, I.R.; Kul`chitskaya, O.V.; Imashev, U.B.

    1995-12-10

    The chemical nature of liquid-phase oxidation of sulfurous petroleum residues by cumene hydroperoxide was studied by a tracer technique. Sulfur compounds are selectively oxidized in the presence of catalytic additives of molybdenum salts. Desulfurization of distillate products and coke during coking of preoxidized raw materials was revealed.

  8. New additive retards coke formation in ethylene furnace tubes

    SciTech Connect (OSTI)

    Not Available

    1994-05-09

    Adding relatively small amounts of a new additive to the feed stream of a steam cracker can inhibit coke formation on the metal surfaces of processing equipment and increase furnace run time. The additive comprises a variable mixture of four to six inorganic salts in aqueous solution. The components of the additive mixture can be varied, as needed, for processing heavy feed materials such as heavy naphtha and gas oil. The process was first tested at a Korean petrochemical plant and is now operating successfully at a commercial facility in Russia. The results of the Korean trial are presented here.

  9. Teamwork in planning and carrying out the first inspection of the coke dry quenching (CDQ) plant of the Kaiserstuhl Coking Facility

    SciTech Connect (OSTI)

    Burchardt, G.

    1996-12-31

    The coke plant Kaiserstuhl operates a coke dry quenching (CDQ) plant with a downstream installed waste heat boiler to satisfy statutory pollution control rules and requirements. This CDQ which went on stream in March 1993 cools the whole coke production output from the Kaiserstuhl coke plant in counterflow to an inert cooling gas. This brief overview on the whole CDQ plant should elucidate the complex of problems posed when trying to make an exact plant revision plan. After all it was impossible to evaluate or to assess all the interior process technology relevant components during the planning stage as the plant was in operation. The revision data for the first interior check was determined and fixed by the statutory rule for steam boilers and pressure vessels. The relevant terms for this check are mandatorily prescribed. In liaison with the testing agency (RW TUEV) the date for the first revision was fixed for April 1995, that means two years after the first commissioning.

  10. Ammonia removal process upgrade to the Acme Steel Coke Plant

    SciTech Connect (OSTI)

    Harris, J.L.

    1995-12-01

    The need to upgrade the ammonia removal process at the Acme Steel Coke Plant developed with the installation of the benzene NESHAP (National Emission Standard for Hazardous Air Pollutants) equipment, specifically the replacement of the final cooler. At Acme Steel it was decided to replace the existing open cooling tower type final cooler with a closed loop direct spray tar/water final cooler. This new cooler has greatly reduced the emissions of benzene, ammonia, hydrogen sulfide and hydrogen cyanide to the atmosphere, bringing them into environmental compliance. At the time of its installation it was not fully recognized as to the effect this would have on the coke oven gas composition. In the late seventies the decision had been made at Acme Steel to stop the production of ammonia sulfate salt crystals. The direction chosen was to make a liquid ammonia sulfate solution. This product was used as a pickle liquor at first and then as a liquid fertilizer as more markets were developed. In the fall of 1986 the ammonia still was brought on line. The vapors generated from the operation of the stripping still are directed to the inlet of the ammonia absorber. At that point in time it was decided that an improvement to the cyclical ammonia removal process was needed. The improvements made were minimal yet allowed the circulation of solution through the ammonia absorber on a continuous basis. The paper describes the original batch process and the modifications made which allowed continuous removal.

  11. Laser ultrasonic furnace tube coke monitor. Quarterly technical progress report No. 1, May 1--August 1, 1998

    SciTech Connect (OSTI)

    1998-08-15

    The overall aim of the project is to demonstrate the performance and practical use of a laser ultrasonic probe for measuring the thickness of coke deposits located within the high temperature tubes of a thermal cracking furnace. This aim will be met by constructing an optical probe that will be tested using simulated coke deposits that are positioned inside of a bench-scale furnace. Successful development of the optical coke detector will provide industry with the only available method for on-line measurement of coke deposits. The optical coke detector will have numerous uses in the refining and petrochemical sectors including monitoring of visbreakers, hydrotreaters, delayed coking units, vacuum tower heaters, and various other heavy oil heating applications where coke formation is a problem. The coke detector will particularly benefit the olefins industry where high temperature thermal crackers are used to produce ethylene, propylene, butylene and other important olefin intermediates. The ethylene industry requires development of an on-line method for gauging the thickness of coke deposits in cracking furnaces because the current lack of detailed knowledge of coke deposition profiles introduces the single greatest uncertainty in the simulation and control of modern cracking furnaces. The laser ultrasonic coke detector will provide operators with valuable new information allowing them to better optimize the decoking turnaround schedule and therefore maximize production capacity.

  12. Development of automatic operation system for coke oven machines at Yawata Works of Nippon Steel Corporation

    SciTech Connect (OSTI)

    Matsunaga, Masao; Uematsu, Hiroshi; Nakagawa, Yoji; Ishiharaguchi, Yuji

    1995-12-01

    The coke plant is a working environment involving heavy dust emissions, high heat and demanding physical labor. The labor-saving operation of the coke plant is an essential issue from the standpoints of not only improvement in working environment, but also reduction in fixed cost by enhancement of labor productivity. Under these circumstances, Nippon Steel has implemented the automation of coke oven machines. The first automatic operation system for coke oven machinery entered service at Oita Works in 1992, followed by the second system at the No. 5 coke oven battery of the coke plant at Yawata Works. The Yawata automatic operation system is characterized by the installation of coke oven machinery to push as many as 140 ovens per day within a short cycle time, such as a preliminary ascension pipe cap opening car and cycle time simulator by the manned operation of the pusher, which is advantageous from the standpoint of investment efficiency, and by the monitoring of other oven machines by the pusher. These measures helped to reduce the manpower requirement to 2 persons per shift from 4 persons per shift. The system entered commercial operation in March, 1994 and has been smoothly working with an average total automatic rate of 97%. Results from the startup to recent operation of the system are reported below.

  13. Gas treatment and by-products recovery of Thailand`s first coke plant

    SciTech Connect (OSTI)

    Diemer, P.E.; Seyfferth, W.

    1997-12-31

    Coke is needed in the blast furnace as the main fuel and chemical reactant and the main product of a coke plant. The second main product of the coke plant is coke oven gas. During treatment of the coke oven gas some coal chemicals like tar, ammonia, sulphur and benzole can be recovered as by-products. Since the market prices for these by-products are rather low and often erratic it does not in most cases justify the investment to recover these products. This is the reason why modern gas treatment plants only remove those impurities from the crude gas which must be removed for technical and environmental reasons. The cleaned gas, however, is a very valuable product as it replaces natural gas in steel work furnaces and can be used by other consumers. The surplus can be combusted in the boiler of a power plant. A good example for an optimal plant layout is the new coke oven facility of Thai Special Steel Industry (TSSI) in Rayong. The paper describes the TSSI`s coke oven gas treatment plant.

  14. Organophosphorus compounds as coke inhibitors during naphtha pyrolysis. Effect of benzyl diethyl phosphite and triphenylphosphine sulfide

    SciTech Connect (OSTI)

    Das, P.; Prasad, S.; Kunztu, D.

    1992-09-01

    This paper reports that significant reduction in the rate of coke formation during naphtha pyrolysis was achieved by adding benzyl diethyl phosphite or triphenylphosphine sulfide to the feed. Although the yield of carbon oxides was reduced, there was no effect of these additives on the hydrocarbon yields. Addition of these organophosphorus compounds significantly reduced the concentration of metals, such as iron, nickel, and chromium, incorporated in the coke. A previously proposed model for coke inhibition due to the formation of a passivating metal-phosphorus complex could satisfactorily correlate the data.

  15. Glass-coating and cleaning system to prevent carbon deposition on coke oven walls

    SciTech Connect (OSTI)

    Takahira, Takuya; Ando, Takeshi; Kasaoka, Shizuki; Yamauchi, Yutaka

    1997-12-31

    The new technology for protecting the coking chamber bricks from damage by hard-pushing is described. The technology consists of the glass coating on the wall bricks and a wall cleaner to blow deposited carbon. For the glass coating, a specially developed glaze is sprayed onto the wall bricks by a spraying device developed to completely spray one coking chamber in a few minutes. The wall cleaner is installed on a pusher ram in the facility to automatically blow air at a sonic speed during coke pushing. The life of the glazed layer is estimated to be over two years.

  16. Table 22. Average Price of U.S. Coke Imports

    U.S. Energy Information Administration (EIA) Indexed Site

    2. Average Price of U.S. Coke Imports (dollars per short ton) Year to Date Continent and Country of Origin January - March 2016 October - December 2015 January - March 2015 2016 2015 Percent Change North America Total 181.85 113.11 213.82 181.85 213.82 -15.0 Canada 181.85 113.11 213.82 181.85 213.82 -15.0 Europe Total 270.94 416.80 770.50 270.94 770.50 -64.8 Austria - 1,788.00 - - - - France - 1,110.35 - - - - Germany, Federal Republic of - - 206.27 - 206.27 - Italy 265.37 300.11 - 265.37 - -

  17. An analysis of potassium iodide (KI) prophylaxis for the general public in the event of a nuclear accident

    SciTech Connect (OSTI)

    Behling, H.; Behling, K.; Amarasooriya, H.; Kotsch, J.

    1995-02-01

    A generic difficulty encountered in cost-benefit analyses is the quantification of major elements that define the costs and the benefits in commensurate units. In this study, the costs of making KI available for public use, and the avoidance of thyroidal health effects predicted to be realized from the availability of that KI (i.e., the benefits), are defined in the commensurate units of dollars.

  18. An investigation of the properties of pitch coke modified by chemically active additives

    SciTech Connect (OSTI)

    Kulakov, V.V.; Fedeneva, E.N.; Neproshin, E.I.

    1984-01-01

    The results of an investigation are presented of the influence of chemically active additives on the yield and properties of coke from hard-coal pitch. A comparison has been made of the efficacy of the influence of these additives.

  19. Cryogenic fractionator gas as stripping gas of fines slurry in a coking and gasification process

    DOE Patents [OSTI]

    DeGeorge, Charles W.

    1981-01-01

    In an integrated coking and gasification process wherein a stream of fluidized solids is passed from a fluidized bed coking zone to a second fluidized bed and wherein entrained solid fines are recovered by a scrubbing process and wherein the resulting solids-liquid slurry is stripped with a stripping gas to remove acidic gases, at least a portion of the stripping gas comprises a gas comprising hydrogen, nitrogen and methane separated from the coker products.

  20. The Videofil probe, a novel instrument to extend the coke oven service life

    SciTech Connect (OSTI)

    Gaillet, J.P.; Isler, D.

    1997-12-31

    To prolong the service life of coke oven batteries, the Centre de Pyrolyse de Marienau developed the Videofil probe, a novel instrument to conduct diagnoses and to help repair operations of coke ovens. The Videofil probe is a flexible non-water-cooled endoscope which is used to locate flue wall damage and estimate its importance, to define the oven zones to repair and guide the repair work and to control the quality of the repair work and its durability.

  1. Coke gasification: the influence and behavior of inherent catalytic mineral matter

    SciTech Connect (OSTI)

    Mihaela Grigore; Richard Sakurovs; David French; Veena Sahajwalla

    2009-04-15

    Gasification of coke contributes to its degradation in the blast furnace. In this study, the effect of gasification on the inherent catalytic minerals in cokes and their reciprocal influence on gasification are investigated. The catalytic mineral phases identified in the cokes used in this study were metallic iron, iron sulfides, and iron oxides. Metallic iron and pyrrhotite were rapidly oxidized during gasification to iron oxide. The catalysts had a strong influence on the apparent rates at the initial stages of reaction. As gasification proceeds, their effect on the reaction rate diminishes as a result of reducing the surface contact between catalyst and carbon matrix because of carbon consumption around the catalyst particles; with extended burnout the reactivity of the coke becomes increasingly dependent on surface area. The reaction rate in the initial stages was also influenced by the particle size of the catalytic minerals; for a given catalytic iron level, the cokes whose catalytic minerals were more finely dispersed had a higher apparent reaction rate than cokes containing larger catalytic particles. Iron, sodium, and potassium in the amorphous phase did not appear to affect the reaction rate. 40 refs., 16 figs., 6 tabs.

  2. Development of an Advanced Combined Heat and Power (CHP) System Utilizing Off-Gas from Coke Calcination

    SciTech Connect (OSTI)

    2009-02-01

    This factsheet describes a research project whose goal is to reduce the energy and carbon intensity of the calcined coke production process.

  3. Application of process safety management to the coke industry

    SciTech Connect (OSTI)

    Mentzer, W.P. (USX Corp., Clairton, PA (United States))

    1994-09-01

    OSHA's Process Safety Management (PSM) standard went into effect on May 26, 1992. Explosions at various industrial facilities that claimed the lives of workers over the past several years were the catalyst for the new federal regulations. The new PSM standard deals with 130 specific chemicals along with flammable liquids and gases used at nearly 25,000 worksites. The performance-based PSM standard consists of 14 elements that establish goals and describe basic program elements to fulfill these goals. The PSM standard requires employers to conduct a process hazard analysis to examine potential problems and determine what preventative measures should be taken. Key elements include employee training, written operating procedures, safety reviews and maintenance requirements to insure the mechanical integrity of critical components. The presentation will cover the evolution of OSHA's PSM standard, the requirements of the 14 elements in the PSM standard and discuss the significant achievements in the development and implementation of the PSM process at US Steel's Clairton coke plant.

  4. Effect of coal and coke qualities on blast furnace injection and productivity at Taranto

    SciTech Connect (OSTI)

    Salvatore, E.; Calcagni, M.; Eichinger, F.; Rafi, M.

    1995-12-01

    Injection rates at Taranto blast furnaces Nos. 2 and 4, for more than 16 months, was maintained above 175 kg/thm. Monthly average injection rate for two months stabilized above 190 kg/thm. This performance was possible due to the very high combined availabilities of Taranto blast furnaces and the KST injection system. Based upon this experience the quantitative relationships between coke/coal and blast furnace operational parameters were studied and are shown graphically. During this period due to coke quality changes, injection rate had to be reduced. The effect of using coke breeze in coke/ferrous charge as well as coal blend was also evaluated. Permeability of the furnace was found to be directly affected by O{sub 2} enrichment level, while at a high PCI rate no correlation between actual change in coke quality and permeability could be established. The future of PCI technology lies in better understanding of relationships between material specifications and blast furnace parameters of which permeability is of prime importance.

  5. Automatic coke oven heating control system at Burns Harbor for normal and repair operation

    SciTech Connect (OSTI)

    Battle, E.T.; Chen, K.L.

    1997-12-31

    An automatic heating control system for coke oven batteries was developed in 1985 for the Burns Harbor No. 1 battery and reported in the 1989 Ironmaking Conference Proceedings. The original system was designed to maintain a target coke temperature at a given production level under normal operating conditions. Since 1989, enhancements have been made to this control system so that it can also control the battery heating when the battery is under repair. The new control system has improved heating control capability because it adjusts the heat input to the battery in response to anticipated changes in the production schedule. During a recent repair of this 82 oven battery, the pushing schedule changed from 102 ovens/day to 88 ovens/day, then back to 102 ovens/day, then to 107 ovens/day. During this repair, the control system was able to maintain the coke temperature average standard deviation at 44 F, with a maximum 75 F.

  6. Light oil yield improvement project at Granite City Division Coke/By-Product Plant

    SciTech Connect (OSTI)

    Holloran, R.A.

    1995-12-01

    Light oil removal from coke oven gas is a process that has long been proven and utilized throughout many North American Coke/By-Products Plants. The procedures, processes, and equipment requirements to maximize light oil recovery at the Granite City By-Products Plant will be discussed. The Light Oil Yield Improvement Project initially began in July, 1993 and was well into the final phase by February, 1994. Problem solving techniques, along with utilizing proven theoretical recovery standards were applied in this project. Process equipment improvements and implementation of Operator/Maintenance Standard Practices resulted in an average yield increase of 0.4 Gals./NTDC by the end of 1993.

  7. Coal flow aids reduce coke plant operating costs and improve production rates

    SciTech Connect (OSTI)

    Bedard, R.A.; Bradacs, D.J.; Kluck, R.W.; Roe, D.C.; Ventresca, B.P.

    2005-06-01

    Chemical coal flow aids can provide many benefits to coke plants, including improved production rates, reduced maintenance and lower cleaning costs. This article discusses the mechanisms by which coal flow aids function and analyzes several successful case histories. 2 refs., 10 figs., 1 tab.

  8. Who lives near coke plants and oil refineries An exploration of the environmental inequity hypothesis

    SciTech Connect (OSTI)

    Graham, J.D.; Beaulieu, N.D.; Sussman, D.; Sadowitz, M.; Li, Y.C. )

    1999-04-01

    Facility-specific information on pollution was obtained for 36 coke plants and 46 oil refineries in the US and matched with information on populations surrounding these 82 facilities. These data were analyzed to determine whether environmental inequities were present, whether they were more economic or racial in nature, and whether the racial composition of nearby communities has changed significantly since plants began operations. The Census tracts near coke plants have a disproportionate share of poor and nonwhite residents. Multivariate analyses suggest that existing inequities are primarily economic in nature. The findings for oil refineries are not strongly supportive of the environmental inequity hypothesis. Rank ordering of facilities by race, poverty, and pollution produces limited (although not consistent) evidence that the more risky facilities tend to be operating in communities with above-median proportions of nonwhite residents (near coke plants) and Hispanic residents (near oil refineries). Over time, the radical makeup of many communities near facilities has changed significantly, particularly in the case of coke plants sited in the early 1900s. Further risk-oriented studies of multiple manufacturing facilities in various industrial sectors of the economy are recommended.

  9. Torrefaction reduction of coke formation on catalysts used in esterification and cracking of biofuels from pyrolysed lignocellulosic feedstocks

    SciTech Connect (OSTI)

    Kastner, James R; Mani, Sudhagar; Hilten, Roger; Das, Keshav C

    2015-11-04

    A bio-oil production process involving torrefaction pretreatment, catalytic esterification, pyrolysis, and secondary catalytic processing significantly reduces yields of reactor char, catalyst coke, and catalyst tar relative to the best-case conditions using non-torrefied feedstock. The reduction in coke as a result of torrefaction was 28.5% relative to the respective control for slow pyrolysis bio-oil upgrading. In fast pyrolysis bio-oil processing, the greatest reduction in coke was 34.9%. Torrefaction at 275.degree. C. reduced levels of acid products including acetic acid and formic acid in the bio-oil, which reduced catalyst coking and increased catalyst effectiveness and aromatic hydrocarbon yields in the upgraded oils. The process of bio-oil generation further comprises a catalytic esterification of acids and aldehydes to generate such as ethyl levulinate from lignified biomass feedstock.

  10. Recycling of rubber tires in electric arc furnace steelmaking: simultaneous combustion of metallurgical coke and rubber tyres blends

    SciTech Connect (OSTI)

    Magdalena Zaharia; Veena Sahajwalla; Byong-Chul Kim; Rita Khanna; N. Saha-Chaudhury; Paul O'Kane; Jonathan Dicker; Catherine Skidmore; David Knights

    2009-05-15

    The present study investigates the effect of addition of waste rubber tires on the combustion behavior of its blends with coke for carbon injection in electric arc furnace steelmaking. Waste rubber tires were mixed in different proportions with metallurgical coke (MC) (10:90, 20:80, 30:70) for combustion and pyrolysis at 1473 K in a drop tube furnace (DTF) and thermogravimetric analyzer (TGA), respectively. Under experimental conditions most of the rubber blends indicated higher combustion efficiencies compared to those of the constituent coke. In the early stage of combustion the weight loss rate of the blends is much faster compared to that of the raw coke due to the higher volatile yield of rubber. The presence of rubber in the blends may have had an impact upon the structure during the release and combustion of their high volatile matter (VM) and hence increased char burnout. Measurements of micropore surface area and bulk density of the chars collected after combustion support the higher combustion efficiency of the blends in comparison to coke alone. The surface morphology of the 30% rubber blend revealed pores in the residual char that might be attributed to volatile evolution during high temperature reaction in oxygen atmosphere. Physical properties and VM appear to have a major effect upon the measured combustion efficiency of rubber blends. The study demonstrates that waste rubber tires can be successfully co-injected with metallurgical coke in electric arc furnace steelmaking process to provide additional energy from combustion. 44 refs., 11 figs., 2 tabs.

  11. Air pollution from a large steel factory: polycyclic aromatic hydrocarbon emissions from coke-oven batteries

    SciTech Connect (OSTI)

    Lorenzo Liberti; Michele Notarnicola; Roberto Primerano; Paolo Zannetti

    2006-03-15

    A systematic investigation of solid and gaseous atmospheric emissions from some coke-oven batteries of one of Europe's largest integrated steel factory (Taranto, Italy) has been carried out. These emissions, predominantly diffuse, originate from oven leakages, as well as from cyclic operations of coal loading and coke unloading. In air monitoring samples, polycyclic aromatic hydrocarbons (PAHs) were consistently detected at concentrations largely exceeding threshold limit values. By means of PAHs speciation profile and benzo-(a)pyrene (BaP) equivalent dispersion modeling from diffuse sources, the study indicated that serious health risks exist not only in working areas, but also in a densely populated residential district near the factory. 30 refs., 5 figs., 3 tabs.

  12. High-strength insulating castable used behind coke-oven buckstays and jambs

    SciTech Connect (OSTI)

    Sich, G. Jr. ); Gladfelder, L.A. . Iron and Steel Monolithics); Cox, F.S.

    1993-10-01

    Conventional pumpable, clay-based grouting materials used behind the armor/jamb systems were inadequate. Open brick joints caused reduced end flue temperatures which resulted in improper coking with reduced yields and coke quality, as well as difficulties in controlling door emissions. Based on criteria established by an Armco task force, a unique commercial product supplied by North American Refractories was located that had the potential of meeting these requirements. A laboratory trial casting program was undertaken by Armco that verified the potential of this castable refractory. Development programs by Armco and North American Refractories were established to optimize the properties of the refractory. Actual oven repairs have demonstrated that the castable developed meets all requirements for successful performance. These include: absence of castable failures; nonspalling; repairable through ceramic welding; and acceptable flowability.

  13. Coke oven doors: Historical methods of emission control and evaluation of current designs

    SciTech Connect (OSTI)

    Pettrey, J.O.; Greene, D.E. )

    1993-01-01

    The containment of oven door leakage has presented challenges to coke producers for many years as the requirements of environmental regulatory agencies have become increasingly stringent. A description and evaluation of past door modifications, leakage control methodologies and luting practices on Armco Steel Company, L.P.'s Ashland No. 4 Battery is detailed to provide a background for recent work, and to expand the industry's technology base. The strict door leakage standards of the 1990 amendments to the USA Clean Air Act has prompted additional technical studies. Both a joint Armco committee's evaluation of successful systems world wide and test door installations at Ashland were incorporated to determine compliance strategy. The eventual installation of Ikio Model II coke oven doors, along with modifications to ancillary equipment, has resulted in door leakage rates approaching zero. Associated methods, problems, results and evaluations are discussed.

  14. A mathematical model for the estimation of flue temperature in a coke oven

    SciTech Connect (OSTI)

    Choi, K.I.; Kim, S.Y.; Suo, J.S.; Hur, N.S.; Kang, I.S.; Lee, W.J.

    1997-12-31

    The coke plants at the Kwangyang works has adopted an Automatic Battery Control (ABC) system which consists of four main parts, battery heating control, underfiring heat and waste gas oxygen control, pushing and charging schedule and Autotherm-S that measures heating wall temperature during pushing. The measured heating wall temperature is used for calculating Mean Battery Temperature (MBT) which is average temperature of flues for a battery, but the Autotherm-S system can not provide the flue temperatures of an oven. This work attempted to develop mathematical models for the estimation of the flue temperature using the measured heating wall temperature and to examine fitness of the mathematical model for the coke plant operation by analysis of raw gas temperature at the stand pipe. Through this work it is possible to reflect heating wall temperature in calculating MBT for battery heating control without the interruption caused by a maintenance break.

  15. Incorporation of deuterium in coke formed on an acetylene hydrogenation catalyst

    SciTech Connect (OSTI)

    Larsson, M.; Jansson, J.; Asplund, S.

    1996-09-01

    In selective hydrogenation of acetylene in excess ethylene, considerable amounts of coke or {open_quotes}green oils{close_quotes} are formed and accumulate on the catalyst. A fraction of the acetylene undergoes oligomerization reactions producing C{sub 4}`s and larger hydrocarbons. Compounds larger than C{sub 8} are retained on the catalysts surface or as a condensed phase in the pore system. The reaction mechanism is largely unknown but several authors have postulated that oligomerization occurs through dissociatively adsorbed acetylene (2), i.e., C{sub 2}H(ads) and C{sub 2}(ads). In this paper a novel method of studying the coke formation on a catalyst is introduced. Deuterium is incorporated in the coke during hydrogenation of acetylene, and during temperature-programmed oxidation (TPO) experiments the deuterium content is analyzed. The objective is to shed some light on the mechanism for oligomer formation in this system. The catalyst, Pd/{alpha}-Al{sub 2}O{sub 3}, was prepared by the impregnation of {alpha}-alumina (Sued-Chemie) with a solution of Pd(NO{sub 3}){sub 2} in 30% HNO{sub 3}. 8 refs., 4 figs.

  16. Health-hazard evaluation report No. HETA-88-377-2120, Armco Coke Oven, Ashland Kentucky

    SciTech Connect (OSTI)

    Kinnes, G.M.; Fleeger, A.K.; Baron, S.L.

    1991-06-01

    In response to a request from the Oil, Chemical and Atomic Workers International Union, a study was made of possible hazardous working conditions at ARMCO Coke Oven (SIC-3312), Ashland, Kentucky. The facility produces about 1,000,000 tons of coke annually. Of the approximately 400 total employees at the coke oven site, 55 work in the by products area. Air quality sampling results indicated overexposure to both benzene (71432) and coal tar pitch volatiles (CTPVs). Airborne levels of benzene ranged as high as 117 parts per million (ppm) with three of 17 samples being above the OSHA limit of 1ppm. Airborne concentrations of CTPVs ranged as high as 0.38mg/cu m with two of six readings being above OSHA limit of 0.2mg/cu m. Several polynuclear aromatic hydrocarbons were also detected. The authors conclude that by products area workers are potentially overexposed to carcinogens, including benzene, CTPVs, and polynuclear aromatic hydrocarbons. An epidemiologic study is considered unlikely to yield meaningful information at this time, due to the small number of workers and the short follow up period. The authors recommend specific measures for reducing potential employee exposures, including an environmental sampling program, a preventive maintenance program, improved housekeeping procedures, and reducing exposure in operators' booths.

  17. Relational contracting and the law and economics of vertical integration: a study of the economics of petroleum coking, processing, and consumption

    SciTech Connect (OSTI)

    Erickson, J.R.

    1981-01-01

    The basis for this study was an antitrust suit brought by the Federal Trade Commission against the Great Lakes Carbon Corp., a processor and reseller of green petroleum coke, and eight petroleum refiners. The respondents in this case were accused of using long-term contracts to foreclose the markets for both green and processed petroleum coke. Chapter 1 develops a theory of exchange and the contracts governing exchange. Chapter 2 describes the petroleum-coke industry and the nature of green coke exchange. It explains the reasons for the highly concentrated structure of the green-coke market in terms of the technology of petroleum-coke production and consumption and the physical and byproduct nature of petroleum coke. Chapter 3 takes a large number of green-coke contracts and breaks them down into their various relevant provisions. These provisions are then grouped according to their purpose and the characteristics of the firms employing them and shows that differences between the contracts can be explained by differences in the risks to firms of engaging in green coke exchange. Chapter 4 discusses the implications of vertical restrictions from the point of view of relational contracting using the data adduced in Chapter 3.

  18. Proposal of a novel multifunctional energy system for cogeneration of coke, hydrogen, and power - article no. 052001

    SciTech Connect (OSTI)

    Jin, H.G.; Sun, S.; Han, W.; Gao, L.

    2009-09-15

    This paper proposes a novel multifunctional energy system (MES), which cogenerates coke, hydrogen, and power, through the use of coal and coke oven gas (COG). In this system, a new type of coke oven, firing coal instead of COG as heating resource for coking, is adopted. The COG rich in H{sub 2} is sent to a pressure swing adsorption (PSA) unit to separate about 80% of hydrogen first, and then the PSA purge gas is fed to a combined cycle as fuel. The new system combines the chemical processes and power generation system, along with the integration of chemical conversion and thermal energy utilization. In this manner, both the chemical energy of fuel and thermal energy can be used more effectively. With the same inputs of fuel and the same output of coking heat, the new system can produce about 65% more hydrogen than that of individual systems. As a result, the thermal efficiency of the new system is about 70%, and the exergy efficiency is about 66%. Compared with individual systems, the primary energy saving ratio can reach as high as 12.5%. Based on the graphical exergy analyses, we disclose that the integration of synthetic utilization of COG and coal plays a significant role in decreasing the exergy destruction of the MES system. The promising results obtained may lead to a clean coal technology that will utilize COG and coal more efficiently and economically.

  19. Coke oven gas treatment and by-product plant of Magnitogorsk Integrated Iron and Steel Works

    SciTech Connect (OSTI)

    Egorov, V.N.; Anikin, G.J.; Gross, M.

    1995-12-01

    Magnitogorsk Integrated Iron and Steel Works, Russia, decided to erect a new coke oven gas treatment and by-product plant to replace the existing obsolete units and to improve the environmental conditions of the area. The paper deals with the technological concept and the design requirements. Commissioning is scheduled at the beginning of 1996. The paper describes H{sub 2}S and NH{sub 3} removal, sulfur recovery and ammonia destruction, primary gas cooling and electrostatic tar precipitation, and the distributed control system that will be installed.

  20. Improved wastewater treatment at Wheeling-Pittsburgh Steel Corporations`s Steubenville East Coke Plant

    SciTech Connect (OSTI)

    Goshe, A.J.; Nodianos, M.J.

    1995-12-01

    Wheeling-Pittsburgh Steel Corporation recently improved its wastewater treatment at it`s by-products coke plant. This has led to greatly improved effluent quality. Excess ammonia liquor, along with wastewater from the light oil recovery plant, desulfurization facility, and coal pile runoff, must be treated prior to being discharged into the Ohio River. This is accomplished using a biological wastewater treatment plant to remove 99.99% of the organic contaminants and ammonia. Biologically treated, clarified wastewater is now polished in the newly constructed tertiary treatment plant.

  1. Cracking of simulated oil refinery off-gas over a coal char, petroleum coke, and quartz

    SciTech Connect (OSTI)

    Yuan Zhang; Jin-hu Wu; Dong-ke Zhang

    2008-03-15

    The cracking of oil refinery off-gas, simulated with a gas mixture containing methane (51%), ethylene (21.4%), ethane (21.1%), and propane (6.5%), over a coal char, petroleum coke, and quartz, respectively, has been studied in a fixed bed reactor. The experiments were performed at temperatures between 850 and 1000{sup o}C and at atmospheric pressure. The results show that the conversions of all species considered increased with increasing temperature. Ethane and propane completely decomposed over all three bed materials in the temperature range investigated. However, the higher initial conversion rates of methane and ethylene cracking at all temperatures were observed only over the coal char and not on the petroleum coke and quartz, indicating a significant catalytic effect of the coal char on methane and ethylene cracking. Methane and ethylene conversions decreased with reaction time due to deactivation of the coal char by carbon deposition on the char surface and, in the later stage of a cracking experiment, became negative, suggesting that methane and ethylene had been formed during the cracking of ethane and propane. 16 refs., 13 figs., 2 tabs.

  2. Petroleum Coke

    Gasoline and Diesel Fuel Update (EIA)

    Proved Reserves (Billion Cubic Feet) Pennsylvania Shale Proved Reserves (Billion Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 2000's 96 88 3,790 2010's 10,708 23,581 32,681 44,325 56,210 - = No Data Reported; -- = Not Applicable; NA = Not Available; W = Withheld to avoid disclosure of individual company data. Release Date: 11/19/2015 Next Release Date: 12/31/2016 Referring Pages: Shale Natural Gas Proved Reserves as of Dec. 31 Pennsylvania Shale Gas

  3. Development and Testing of the Advanced CHP System Utilizing the Off-Gas from the Innovative Green Coke Calcining Process in Fluidized Bed

    SciTech Connect (OSTI)

    Chudnovsky, Yaroslav; Kozlov, Aleksandr

    2013-08-15

    Green petroleum coke (GPC) is an oil refining byproduct that can be used directly as a solid fuel or as a feedstock for the production of calcined petroleum coke. GPC contains a high amount of volatiles and sulfur. During the calcination process, the GPC is heated to remove the volatiles and sulfur to produce purified calcined coke, which is used in the production of graphite, electrodes, metal carburizers, and other carbon products. Currently, more than 80% of calcined coke is produced in rotary kilns or rotary hearth furnaces. These technologies provide partial heat utilization of the calcined coke to increase efficiency of the calcination process, but they also share some operating disadvantages. However, coke calcination in an electrothermal fluidized bed (EFB) opens up a number of potential benefits for the production enhancement, while reducing the capital and operating costs. The increased usage of heavy crude oil in recent years has resulted in higher sulfur content in green coke produced by oil refinery process, which requires a significant increase in the calcinations temperature and in residence time. The calorific value of the process off-gas is quite substantial and can be effectively utilized as an “opportunity fuel” for combined heat and power (CHP) production to complement the energy demand. Heat recovered from the product cooling can also contribute to the overall economics of the calcination process. Preliminary estimates indicated the decrease in energy consumption by 35-50% as well as a proportional decrease in greenhouse gas emissions. As such, the efficiency improvement of the coke calcinations systems is attracting close attention of the researchers and engineers throughout the world. The developed technology is intended to accomplish the following objectives: - Reduce the energy and carbon intensity of the calcined coke production process. - Increase utilization of opportunity fuels such as industrial waste off-gas from the novel

  4. Interim report of the interagency coal export task force: draft for public comment. [Trade by country 1960-1979; general forecasting to 1985, 1990 and 2000

    SciTech Connect (OSTI)

    1981-01-01

    The Interagency Coal Export Task Force was formed in the Spring of 1980 at the direction of the President, in support of the international efforts of the United States, encouraging the use of coal. Its purpose was to report on possible courses of action to increase United States steam coal exports in a manner consistent with other national policies, including our commitment to environmental protection. The Task Force assembled existing data, developed significant new information regarding the international coal market and undertook analyses of apparent problems underlying coal exports. The Task Force contributed to a public awareness of the fact that increased coal exports will serve both the domestic and international interests of the United States. Based upon extensive, independent field studies in Europe and the Far East, the Task Force concludes that there will be significant growth in world demand for steam coal. Such growth has already begun, has contributed to the almost seven-fold increase in United States overseas steam coal exports for 1990 over 1979, and is expected to continue beyond the end of this century. The growth in world steam coal trade projected in the report does not guarantee United States coal exporters a large or expanding share of the market. The United States' role depends on the buying strategies of the consuming countries, the policies and prices of competing exporters, and the actions taken by the United States to maintain reasonable prices, prompt delivery and dependable quality. Projections of United States steam coal exports, therefore, rest upon a number of highly uncertain factors which are discussed in some detail.

  5. ARM - Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govPublications Publications Journal Articles Conference Documents Program Documents & Technical Reports Publications Database Public Information Materials Image Library Videos Publication Resources Submit a Publication Publishing Procedures ARM Style Guide (PDF, 448KB) Acronyms Glossary Logos Contacts RSS for Publications Publications Investigators who use Atmospheric Radiation Measurement (ARM) Climate Research Facility data are major contributors to atmospheric research aimed toward

  6. Coke oven air and water pollution. (Latest citations from the EI Compendex*Plus database). Published Search

    SciTech Connect (OSTI)

    Not Available

    1994-09-01

    The bibliography contains citations concerning coke oven pollution. Monitoring, sampling, analyzing, transport properties, and control of emissions and effluents are cited in this compilation from worldwide journals. Pollutants described are sulfur dioxide, hydrogen sulfide, ammonia, phenols, benzopyrene, particulates, and other trace elements and compounds. Process and equipment modifications, such as pipeline charging, wet and dry quenching, retrofitting, and oven leakage preventives are included. (Contains a minimum of 200 citations and includes a subject term index and title list.)

  7. Comparative evaluation of rejuvenation of spent residue hydroprocessing catalysts in the decoked (oxide) and coked (sulfided) forms

    SciTech Connect (OSTI)

    Stanislaus, A.; Marafi, M.; Absi-Halabi, M.

    1993-12-31

    Two routes were used to rejuvenate spent residue hydroprocessing catalyst by leaching foulant metals. In the first, the deoiled spent catalyst containing coke and deposited metals in the sulfide form was chemically treated to remove the metal foulants. In the second, the deoiled spent catalyst was decoked by controlled combustion of coke and the resultant coke free catalyst containing the metals in the oxide form was subjected to leaching. Oxalic acid, a chelating agent, that can form soluble metal complexes was used for metal leaching in both routes. The influence of adding an oxidizing agent such as H{sub 2}O{sub 2} to oxalic acid on the leaching efficiency was also examined in both routes. The spent and treated catalysts were characterized and the improvements in surface area pore volume and HDS activity of the catalysts as a result of leaching in different routes compared. The selectivity for leaching of the major metal foulant (vanadium) was better, and activity recovery was higher for the catalyst rejuvenated by metal leaching prior to decoking.

  8. General Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    information General Information JLF Contacts Request a Tour

  9. Public Information Campaigns

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy (DOE) supports states, local governments, and tribes in their efforts to carry out education campaigns targeting the general public about energy conservation. These...

  10. Effects of HyperCoal addition on coke strength and thermoplasticity of coal blends

    SciTech Connect (OSTI)

    Toshimasa Takanohashi; Takahiro Shishido; Ikuo Saito

    2008-05-15

    Ashless coal, also known as HyperCoal (HPC), was produced by thermal extraction of three coals of different ranks (Gregory caking coal, Warkworth steam coal, and Pasir subbituminous coal) with 1-methylnaphthalene (1-MN) at 360, 380, and 400{sup o}C. The effects of blending these HPCs into standard coal blends were investigated. Blending HPCs as 5-10% of a standard blend (Kouryusho:Goonyella:K9) enhanced the thermoplasticity over a wide temperature range. For blends made with the Pasir-HPC, produced from a noncaking coal, increasing the extraction temperature from 360 to 400{sup o}C increased the thermoplasticity significantly. Blends containing Warkworth-HPC, produced from a slightly caking coal, had a higher tensile strength than the standard blend in semicoke strength tests. The addition of 10% Pasir-HPC, extracted at 400{sup o}C, increased the tensile strength of the semicokes to the same degree as those made with Gregory-HPC. Furthermore, all HPC blends had a higher tensile strength and smaller weight loss during carbonization. These results suggest that the HPC became integrated into the coke matrix, interacting strongly with the other raw coals. 14 refs., 11 figs., 1 tab.

  11. Role of hydrogen in blast furnaces to improve productivity and decrease coke consumption

    SciTech Connect (OSTI)

    Agarwal, J.C.; Brown, F.C.; Chin, D.L.; Stevens, G.; Clark, R.; Smith, D.

    1995-12-01

    The hydrogen contained in blast furnace gases exerts a variety of physical, thermochemical, and kinetic effects as the gases pass through the various zones. The hydrogen is derived from two sources: (1) the dissociation of moisture in the blast air (ambient and injected with hot blast), and (2) the release from partial combustion of supplemental fuels (including moisture in atomizing water, steam, or transport air, if any). With each atom of oxygen (or carbon), the molar amounts of hydrogen released are more than six times higher for natural gas than for coal, and two times higher for natural gas than for oil. Injection of natural gas in a blast furnace is not a new process. Small amounts of natural gas--about 50--80 lb or 1,100--1,700 SCF/ton of hot metal--have been injected in many of the North American blast furnaces since the early 1960s, with excellent operating results. What is new, however, is a batter understanding of how natural gas reacts in the blast furnace and how natural gas and appropriate quantities of oxygen can be used to increase the driving rate or combustion rate of carbon (coke) in the blast furnace without causing hanging furnace and operating problems. The paper discusses the factors limiting blast furnace productivity and how H{sub 2} and O{sub 2} can increase productivity.

  12. Publications | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Publications The NREL Publications Database contains bibliographic information about publications developed or written by NREL staff and subcontractors. Search the database for publications from 1977 to the present on subjects related to renewable energy and energy-efficient technologies. Many publications are available electronically as Adobe Acrobat PDFs. The database includes technical reports, journal articles, conference papers, patents, presentations, books, fact sheets, and brochures.

  13. Public Meetings

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Public Meetings Individual Permit: Public Meetings Subscribe to receive notifications for semiannual Individual Permit for Storm Water public meetings. Contact Environmental Communication & Public Involvement P.O. Box 1663 MS M996 Los Alamos, NM 87545 (505) 667-0216 Email Public meeting notifications LANL will email a draft agenda at least one week before the meeting and will consider suggestions from the public for changes or additions to the agenda. Upcoming Meetings 2016 Meeting Archives

  14. WINDExchange: Publications

    Wind Powering America (EERE)

    Information Resources Printable Version Bookmark and Share Publications Webinars Podcasts Economic Development Studies Wind Turbine Ordinances Awards Publications This page lists all of the publications referenced on the WINDExchange initiative's website. Search the WINDExchange Database Choose a Subject Category All Agricultural Public Power Schools Small Wind Economic Development Policy Start Search Clear Search Filtered by: Publication Date State Program Area Title 10/1/2016 Public Power

  15. Related Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Skip navigation links Financial Information Financial Public Processes Asset Management Cost Verification Process Rate Cases BP-18 Rate Case Related Publications Meetings...

  16. CNEEC - Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CNEEC archival journal publications CNEEC maintains two lists of publications, one devoted to research solely supported by funding from the CNEEC EFRC and another containing publications jointly supported by the CNEEC EFRC and other sources. These lists are downloadable in both DOCX and PDF formats below. CNEEC publications solely supported by the EFRC Download Word file Download PDF file CNEEC publications supported jointly by other sources Download Word file Download PDF file Center on

  17. Dispersion modeling of polycyclic aromatic hydrocarbons from combustion of biomass and fossil fuels and production of coke in Tianjin, China

    SciTech Connect (OSTI)

    Shu Tao; Xinrong Li; Yu Yang; Raymond M. Coveney, Jr.; Xiaoxia Lu; Haitao Chen; Weiran Shen

    2006-08-01

    A USEPA procedure, ISCLT3 (Industrial Source Complex Long-Term), was applied to model the spatial distribution of polycyclic aromatic hydrocarbons (PAHs) emitted from various sources including coal, petroleum, natural gas, and biomass into the atmosphere of Tianjin, China. Benzo(a)pyrene equivalent concentrations (BaPeq) were calculated for risk assessment. Model results were provisionally validated for concentrations and profiles based on the observed data at two monitoring stations. The dominant emission sources in the area were domestic coal combustion, coke production, and biomass burning. Mainly because of the difference in the emission heights, the contributions of various sources to the average concentrations at receptors differ from proportions emitted. The shares of domestic coal increased from {approximately} 43% at the sources to 56% at the receptors, while the contributions of coking industry decreased from {approximately} 23% at the sources to 7% at the receptors. The spatial distributions of gaseous and particulate PAHs were similar, with higher concentrations occurring within urban districts because of domestic coal combustion. With relatively smaller contributions, the other minor sources had limited influences on the overall spatial distribution. The calculated average BaPeq value in air was 2.54 {+-} 2.87 ng/m{sup 3} on an annual basis. Although only 2.3% of the area in Tianjin exceeded the national standard of 10 ng/m{sup 3}, 41% of the entire population lives within this area. 37 refs., 9 figs.

  18. ARM - Public Information Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govPublicationsPublic Information Materials Publications Journal Articles Conference Documents Program Documents Technical Reports Publications Database Public Information...

  19. Public Activities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    passes. Roadways that are off limits to visiting members of the public will be posted with signs, and motorists will be given site maps to guide them to the public areas....

  20. Public Activities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Bird Watching Effective January 24, 2005 There are several great bird watching spots in the public areas on Fermilab's site. Driving is restricted to the roads within the public...

  1. Publication Policy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    publication policy Publication Policy Publication of work performed at JLF JLF encourages dissemination of results of experiments performed at the Facility. Vehicles for the publication may include: Journal articles Conference proceedings articles Books or book chapters Technical reports Dissertations Published patents Published abstracts Invited or contributed talks Popular articles Press reports The decision whether to publish and in what form(s) is the responsibility of the Principal

  2. UNIRIB: Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    UNIRIB Publications The University Radioactive Ion Beam (UNIRIB) consortium contributes to numerous scholarly publications and presents research at a variety of international conferences. The following links provide bibliographical information about each article UNIRIB and its staff have published in recent years. 2013 bibliography 2012 bibliography 2011 bibliography 2010 bibliography 2009 bibliography 2008 bibliography 2007 bibliography 2006 bibliography Publications

  3. General Engineers

    U.S. Energy Information Administration (EIA) Indexed Site

    General Engineers The U.S. Energy Information Administration (EIA) within the Department of Energy has forged a world-class information program that stresses quality, teamwork, and employee growth. In support of our program, we offer a variety of profes- sional positions, including the General Engineer, whose work is associated with analytical studies and evaluation projects pertaining to the operations of the energy industry. Responsibilities: General Engineers perform or participate in one or

  4. Development and installation of a high strength insulating castable for use behind buckstays and jambs of a 6-meter coke battery

    SciTech Connect (OSTI)

    Cox, F.S. ); Sich, G. ); Gladfelder, L.

    1993-01-01

    The 6-meter coke oven batteries at Armco Steel Company, L.P.'s Middletown Works experienced stand pipe base failure and numerous door fires with the original hammer-type double knife edge door design. These events resulted in deformation of the battery buckstay, armoring, tie rod, and jamb system. In 1983, these issues were addressed by releasing the jamb from the interlocking armor, replacing the jamb casting, and strengthening the buckstays in place through minimum capital expenditures. End flue refractory condition at that time was good, and little movement was measured. The 1983 repairs did not eliminate heating wall movement, and the heating wall refractories gradually deteriorated. The end flues required special maintenance attention. Broken brickwork from the refractory shapes surrounding the coke side inspection port inside the end flues blocked air ports and gas nozzles. Open brick joints between the nose brick allowed gas and heat to escape the flue toward the buckstays and jambs. This heat loss deformed jambs and reduced end flue temperatures. Jamb movement resulted in partial loss of contact between the top of the jambs and the lintel area above the jambs, resulting in some loss of brick above the jamb area. Improper coking of the coal charge at the end flues reduced yield and affected coke quality. Door emissions and pushing emissions became more difficult to control. A task group explored several strategies for solving these refractory problems. The strategies that were investigated varied widely in scope and cost. One low cost alternative explored (and the one eventually adopted) was to repair the coke side of the batteries. The scope of the repair included three components. Install a new jamb; Reseal the lintel area above the jamb with a castable refractory; and Reseal the area between the end flue and the buckstay/armor/jamb system with a castable refractory. This paper describes the project.

  5. PNNL: Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Search Welcome to the Pacific Northwest National Laboratory publications page. You can use this page to find citations to materials published since 1998 by PNNL staff or by external researchers using PNNL facilities. The latter are denoted by a logo preceding the citation. Full text copies of many PNNL formal reports are available from this page either as PDF or HTML files. Search Tips Help Select Search Criteria Publication Types All Publications Journal Article Formal Report Conference Paper

  6. Publications - JCAP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    056.JPG Publications Research Why Solar Fuels Goals & Objectives Thrust 1 Thrust 2 Thrust 3 Thrust 4 Publications Research Highlights Videos Innovations User Facilities Expert Team Benchmarking Database Device Simulation Tool XPS Spectral Database Research Introduction Why Solar Fuels? Goals & Objectives Thrusts Thrust 1 Thrust 2 Thrust 3 Thrust 4 Library Publications Research Highlights Videos Resources User Facilities Expert Team Benchmarking Database Device Simulation Tool XPS

  7. ARM - Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    HomeroomPublications Outreach Home Room News Publications Traditional Knowledge Kiosks Barrow, Alaska Tropical Western Pacific Site Tours Contacts Students Study Hall About ARM Global Warming FAQ Just for Fun Meet our Friends Cool Sites Teachers Teachers' Toolbox Lesson Plans Publications Climate Education Update Newsletter Would you like to receive our bi-annual newsletter directly to your inbox? Send your contact information to pubs@arm.gov to be added to our distribution. January 2013 An

  8. Publications | NISAC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Technical Assistance » Combined Heat & Power Deployment » Publications Publications Thumbnail image of the cover for the Combined Heat and Power (CHP): A Decade of Progress, A Vision for the Future, October 2009 Numerous publications are available to help educate end users, product developers, project managers, and policymakers on the many potential benefits of distributed generation and combined heat and power (CHP) and the barriers to widespread deployment of these technologies. Among

  9. Geothermal Publications

    Broader source: Energy.gov [DOE]

    Here you'll find the Department of Energy's most recent publications about enhanced geothermal systems (EGS) technologies and research and development activities.

  10. Public Participation

    Broader source: Energy.gov [DOE]

    Maintaining an open dialog with the public is central to the mission of the Environmental Management Los Alamos Field Office (EM-LA).

  11. EC Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ElectricalSimulationsofSeriesandParallelPVArc-Faults(Presentation)admin2016-04-14T2... All Publications Placeholder Download Filename 39thPVSCElectricalSimulationsofSeriesa...

  12. ARM Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Fri, 02 Sep 2016 18:59:06 +0000 http://www.arm.gov en Publication Notice: New Technical Report Available Fri, 02 Sep 2016 18:59:06 +0000 Publications http://www.arm.gov/publications?date=20160902#20160902 Dubey M, A Aiken, LK Berg, A Freedman, and K Gorkowski. 2016. <a href="https://www.arm.gov/publications/programdocs/doe-sc-arm-16-047.pdf" class="external">Two-Column Aerosol Project: Aerosol Light Extinction Measurements Field Campaign

  13. Fuel Cell Technical Publications | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technical Publications » Fuel Cell Technical Publications Fuel Cell Technical Publications Technical information about fuel cells published in technical reports, conference proceedings, journal articles, and websites is provided here. General Transportation Stationary/Distributed Power Auxiliary and Portable Power Manufacturing Material Handling Equipment General The Business Case for Fuel Cells 2015: Powering Corporate Sustainability (Fuel Cell and Hydrogen Energy Association, January 2016)

  14. Hydrogen Technical Publications | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Information Resources » Technical Publications » Hydrogen Technical Publications Hydrogen Technical Publications Technical information about hydrogen published in technical reports, conference proceedings, journal articles, and websites is provided here. General Production Delivery Storage General The Business Case for Fuel Cells 2015: Powering Corporate Sustainability (Fuel Cell and Hydrogen Energy Association, January 2016) 2015 Pathways to Commercial Success: Technologies and Products

  15. General Engineer

    Broader source: Energy.gov [DOE]

    This position is located in Office of Standard Contract Management, within the Office of the General Counsel (GC). The purpose of the position is to conduct technical and engineering reviews of the...

  16. APPLICANT BACKGROUND SURVEY QUESTIONNAIRE GENERAL INSTRUCTIONS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    personnel practices meet the requirements of Federal law. Your responses are voluntary. ... PRIVACY INFORMATION General The information is provided pursuant to Public Law 935-597 ...

  17. Computable General Equilibrium Models for Sustainability Impact...

    Open Energy Info (EERE)

    Publications, Softwaremodeling tools User Interface: Other Website: iatools.jrc.ec.europa.eudocsecolecon2006.pdf Computable General Equilibrium Models for Sustainability...

  18. General Employee Radiological Training

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE HANDBOOK GENERAL EMPLOYEE RADIOLOGICAL TRAINING U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Not Measurement Sensitive This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.energy.gov/nuclearsafety/techstds/ DOE-HDBK-1131-2007 iii Foreword This Handbook describes an implementation process for core training as recommended in chapter 14,

  19. General Employee Radiological Training

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Not Measurement Sensitive DOE-HDBK-1131-2007 December 2007_______ Change Notice 1 Reaffirmed 2013 DOE HANDBOOK GENERAL EMPLOYEE RADIOLOGICAL TRAINING U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.energy.gov/nuclearsafety/techstds/ Change 1 DOE-HDBK-1131-2007 Original Change Part 2 page 5 The

  20. New Mexico Guidelines for Public Notification for Air Quality...

    Open Energy Info (EERE)

    Guidelines for Public Notification for Air Quality Permit Applications Jump to: navigation, search OpenEI Reference LibraryAdd to library General: New Mexico Guidelines for Public...

  1. General Merchandise 50% Energy Savings Technical Support Document...

    Open Energy Info (EERE)

    Publication Year 2009 URL http:www.nrel.govdocsfy09osti46100.pdf Building Models General Merchandise 2009 TSD Chicago High Plug Load Baseline, General Merchandise 2009...

  2. EA-97-B Portland General Electric Company | Department of Energy

    Energy Savers [EERE]

    icon EA-97-B Portland General Electric Company More Documents & Publications EA-380 Freeport Commodities EA-97-D Portland General Electric Company EA-196-A Minnesota Power, Sales

  3. Public Library.

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    d 1 Greet the metal turtles at the Mesa Public Library. 2 Take a tour of public art. 3 Start from Ashley Pond and find the smart house. 4 Test your electric personality at the Bradbury Science Museum. 5 Sit a spell in the Romero Cabin. 6 Walk the Rim Trail. 7 Dress up the Oppie and Groves statues. 8 Attend a Gordon's concert. 9 Put together a team for the mud volleyball tournament. 10 Hear authors speak or attend a gallery opening at Mesa Public Library. 11 Hike to the Cave Of The Winds. 12 Join

  4. ARM Publications Database

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govPublicationsPublications Database Publications Database Submit a Publication Would your publication make a good research highlight? Submit one now. Comments? Need a change to an...

  5. EC Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Wolf-bioadmin2016-04-18T20:58:24+00:00 Popular Downloads Solar Energy Grid Integration ... All Publications Placeholder Download Filename Wolf-bio.pdf filesize 36.22 kB Version 1 ...

  6. EC Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    All Publications Go Back Order by: Title Date added Download count A Conceptual Model ... Hyperspectral Imaging (604) HyRAM 1.0.1 (421) Isotropically etched radial micropore for ...

  7. EC Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    All Publications Go Back Order by: Title Date added Download count A toolkit for ... and Fuel Cells Program (1273) HyRAM 1.0.1 (421) HyRAM: A methodology and toolkit for ...

  8. Public Activities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Art Gallery The Art Gallery in Wilson Hall is only open to the public before and after Arts, Lectures and Film Series events. The Gallery is closed to unescorted visitors at all...

  9. Financial statistics of major publicly owned electric utilities, 1991

    SciTech Connect (OSTI)

    Not Available

    1993-03-31

    The Financial Statistics of Major Publicly Owned Electric Utilities publication presents summary and detailed financial accounting data on the publicly owned electric utilities. The objective of the publication is to provide Federal and State governments, industry, and the general public with data that can be used for policymaking and decisionmaking purposes relating to publicly owned electric utility issues.

  10. PUBLIC_PIA_E-1065.pdf

    Energy Savers [EERE]

    DAYS - WE NEED A CHANGE OF PERSONNELFW: more expoxsure to the general public needs to take place - not less | Department of Energy PUBLIC COMMENT ON FEDERAL REGISTER - DOE IS BUSH CHENEY SCUM COUNTRY THESE DAYS - WE NEED A CHANGE OF PERSONNELFW: more expoxsure to the general public needs to take place - not less PUBLIC COMMENT ON FEDERAL REGISTER - DOE IS BUSH CHENEY SCUM COUNTRY THESE DAYS - WE NEED A CHANGE OF PERSONNELFW: more expoxsure to the general public needs to take place - not less

  11. Determination of the effect of different additives in coking blends using a combination of in situ high-temperature {sup 1}H NMR and rheometry

    SciTech Connect (OSTI)

    Miguel C. Diaz; Karen M. Steel; Trevor C. Drage; John W. Patrick; Colin E. Snape

    2005-12-01

    High-temperature {sup 1}H NMR and rheometry measurements were carried out on 4:1 wt/wt blends of a medium volatile bituminous coal with two anthracites, two petroleum cokes, charcoal, wood, a low-temperature coke breeze, tyre crumb, and active carbon to determine the effects on fluidity development to identify the parameters responsible for these effects during pyrolysis and to study possible relationships among the parameters derived from these techniques. Positive, negative, and neutral effects were identified on the concentration of fluid material. Small positive effects (ca. 5-6%) were caused by blending the coal with petroleum cokes. Charcoal, wood, and active carbon all exerted negative effects on concentration (18-27% reduction) and mobility (12-25% reduction in T2) of the fluid phase, which have been associated with the inert character and high surface areas of these additives that adsorb the fluid phase of the coal. One of the anthracites and the low-temperature coke breeze caused deleterious effects to a lesser extent on the concentration (7-12%) and mobility (13-17%) of the fluid material, possibly due to the high concentration of metals in these additives (ca. 11% ash). Despite the high fluid character of tyre crumb at the temperature of maximum fluidity of the coal (73%), the mobility of the fluid phase of the blend was lower than expected. The comparison of {sup 1}H NMR and rheometry results indicated that to account for the variations in minimum complex viscosity for all the blends, both the maximum concentration of fluid phase and the maximum mobility of the fluid material had to be considered. For individual blends, two exponential relationships have been found between the complex viscosity and the concentration of solid phase in both the softening and resolidification stages but the parameters are different for each blend. 30 refs., 8 figs., 5 tabs.

  12. ,,,,,,"Coal Components",,,"Coke",,,"Electricity Components",,,,,,,,,,,,,,"Natural Gas Components",,,"Steam Components"

    U.S. Energy Information Administration (EIA) Indexed Site

    Relative Standard Errors for Table 7.1;" " Unit: Percents." ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"Selected Wood and Other Biomass Components" ,,,,,,"Coal Components",,,"Coke",,,"Electricity Components",,,,,,,,,,,,,,"Natural Gas Components",,,"Steam Components" " "," ",,,,,,,,,,,,,"Total",,,,,,,,,,,,,,,,,,,,,,,"Wood Residues",,,," " " "," ","

  13. EC Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Hydrokinetic (HK) turbine operation can alter water surface elevations and modify flow in a canal. Significant water level alterations and hydrodynamic energy losses are generally ...

  14. February 10, 2010- Public Power Open Session

    Broader source: Energy.gov [DOE]

    this webinar presentation is the first in a six part series and covers general infromation for public power utilities to provide assistance to industrial customers

  15. Mechanistic Insights of Ethanol Steam Reforming over Ni–CeO x (111): The Importance of Hydroxyl Groups for Suppressing Coke Formation

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Liu, Zongyuan; Duchoň, Tomáš; Wang, Huanru; Peterson, Erik W.; Zhou, Yinghui; Luo, Si; Zhou, Jing; Matolín, Vladimir; Stacchiola, Dario J.; Rodriguez, José A.; et al

    2015-07-30

    We have studied the reaction of ethanol and water over Ni–CeO2-x(111) model surfaces to elucidate the mechanistic steps associated with the ethanol steam reforming (ESR) reaction. Our results provide insights about the importance of hydroxyl groups to the ESR reaction over Ni-based catalysts. Systematically, we have investigated the reaction of ethanol on Ni–CeO2-x(111) at varying Ce³⁺ concentrations (CeO1.8–2.0) with absence/presence of water using a combination of soft X-ray photoelectron spectroscopy (sXPS) and temperature-programmed desorption (TPD). Consistent with previous reports, upon annealing, metallic Ni formed on reduced ceria while NiO was the main component on fully oxidized ceria. Ni⁰ is themore » active phase leading to both the C–C and C–H cleavage of ethanol but is also responsible for carbon accumulation or coking. We have identified a Ni₃C phase that formed prior to the formation of coke. At temperatures above 600K, the lattice oxygen from ceria and the hydroxyl groups from water interact cooperatively in the removal of coke, likely through a strong metal–support interaction between nickel and ceria that facilitates oxygen transfer.« less

  16. Mechanistic insights of ethanol steam reforming over Ni-CeOx(111): The importance of hydroxyl groups for suppressing coke formation

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Liu, Zongyuan; Senanayake, Sanjaya D.; Duchon, Tomas; Wang, Huanru; Peterson, Erik W.; Zhou, Yinghui; Luo, Si; Zhou, Jing; Matolin, Vladimir; Stacchiola, Dario J.; et al

    2015-07-10

    We have studied the reaction of ethanol and water over NiCeO2-x(111) model surfaces to elucidate the mechanistic steps associated with the ethanol steam reforming (ESR) reaction. Our results provide insights about the importance of hydroxyl groups to the ESR reaction over Ni-based catalysts. Systematically, we have investigated the reaction of ethanol on NiCeO2-x(111) at varying Ce? concentrations (CeO1.82.0) with absence/presence of water using a combination of soft X-ray photoelectron spectroscopy (sXPS) and temperature-programmed desorption (TPD). Consistent with previous reports, upon annealing, metallic Ni formed on reduced ceria while NiO was the main component on fully oxidized ceria. Ni? is themoreactive phase leading to both the CC and CH cleavage of ethanol but is also responsible for carbon accumulation or coking. We have identified a Ni?C phase that formed prior to the formation of coke. At temperatures above 600K, the lattice oxygen from ceria and the hydroxyl groups from water interact cooperatively in the removal of coke, likely through a strong metalsupport interaction between nickel and ceria that facilitates oxygen transfer.less

  17. Mechanistic Insights of Ethanol Steam Reforming over Ni–CeO x (111): The Importance of Hydroxyl Groups for Suppressing Coke Formation

    SciTech Connect (OSTI)

    Liu, Zongyuan; Duchoň, Tomáš; Wang, Huanru; Peterson, Erik W.; Zhou, Yinghui; Luo, Si; Zhou, Jing; Matolín, Vladimir; Stacchiola, Dario J.; Rodriguez, José A.; Senanayake, Sanjaya D.

    2015-07-30

    We have studied the reaction of ethanol and water over Ni–CeO2-x(111) model surfaces to elucidate the mechanistic steps associated with the ethanol steam reforming (ESR) reaction. Our results provide insights about the importance of hydroxyl groups to the ESR reaction over Ni-based catalysts. Systematically, we have investigated the reaction of ethanol on Ni–CeO2-x(111) at varying Ce³⁺ concentrations (CeO1.8–2.0) with absence/presence of water using a combination of soft X-ray photoelectron spectroscopy (sXPS) and temperature-programmed desorption (TPD). Consistent with previous reports, upon annealing, metallic Ni formed on reduced ceria while NiO was the main component on fully oxidized ceria. Ni⁰ is the active phase leading to both the C–C and C–H cleavage of ethanol but is also responsible for carbon accumulation or coking. We have identified a Ni₃C phase that formed prior to the formation of coke. At temperatures above 600K, the lattice oxygen from ceria and the hydroxyl groups from water interact cooperatively in the removal of coke, likely through a strong metal–support interaction between nickel and ceria that facilitates oxygen transfer.

  18. Archived Publications and Documents

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Archived Publications and Documents Print ALS 20-Year Roadmap, 2003 Presentations made to the BESAC subcommittee on the 20-Year BES Facilities Roadmap, with references and relevant links. Beamline Data Sheets Data sheets for individual ALS beamlines. The Atomic and Molecular Facility on Beamline 10.0.1 A guide to Beamline 10's facilities for general users studying atomic and molecular physics. (LBL PUB-832) World Class Protein Crystallography A guide to the facilities and capabilities of the

  19. Reduction of COD in leachate from a hazardous waste landfill adjacent to a coke-making facility

    SciTech Connect (OSTI)

    Banerjee, K.; O`Toole, T.J.

    1995-12-01

    A hazardous waste landfill adjacent to a coke manufacturing facility was in operation between July 1990 and December 1991. A system was constructed to collect and treat the leachate from the landfill prior to discharge to the river. Occasionally, the discharge from the treatment facility exceeded the permit limitations for Chemical Oxygen Demand (COD), Biochemical Oxygen Demand (BOD), and Total Organic Carbon (TOC). The objectives of this study were to determine treatment methods which would enable compliance with the applicable discharge limits; to establish the desired operating conditions of the process; and to investigate the effect of various parameters such as pH, catalyst dosage, and reaction time on the COD destruction efficiency. The characteristics of the landfill leachate in question were significantly variable in terms of chemical composition. A review of the influent quality data suggests that the COD concentration ranges between 80 and 390 mg/l. The oxidation processes using Fenton`s reagent or a combination of UV/hydrogen peroxide/catalyst are capable of reducing the COD concentration of the leachate below the discharge limitation of 35 mg/l. The estimated capital cost associated with the Fenton`s reagent process is approximately $525,000, and the annual operating and maintenance cost is $560,000. The estimated capital cost for the UV/hydrogen peroxide/catalyst treatment system is $565,000. The annual operating and maintenance cost of this process would be approximately $430,000.

  20. EC Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    General Method for Fatigue Analysis of Vertical Axis Wind Turbine Bladesadmin2016-04-18T20... And Design Tool (NuMAD v2.0) for Wind Turbine Blades: User's Guide (7143 downloads) ...

  1. Hydrogen Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Publications - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Energy Defense Waste Management Programs Advanced Nuclear Energy

  2. Public Lecture

    ScienceCinema (OSTI)

    None

    2011-10-06

    An outreach activity is being organized by the Turkish community at CERN, on 5 June 2010 at CERN Main Auditorium. The activity consists of several talks that will take 1.5h in total. The main goal of the activity will be describing the CERN based activities and experiments as well as stimulating the public's attention to the science related topics. We believe the wide communication of the event has certain advantages especially for the proceeding membership process of Turkey.

  3. Publications - SRSCRO

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    header-nuclear Publications NWI Regional Programs 2-PAGE Overview (Revised 6_2015) Regional Nuclear Workforce Development in the Central Savannah River Area (June 2010) Nuclear Workforce Initiative®: Filling a Critical Career Need (November 2009) Nuclear Workforce Summit - Summary Report (June 2009) Booz Allen Hamilton Nuclear Workforce Survey Report (June 2009) Ensuring a Skilled Workforce for the Nuclear Renaissance (Nov 2008) Types of Nuclear Jobs Nuclear Industry Job Descriptions imag

  4. PV Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Publications - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Energy Defense Waste Management Programs Advanced Nuclear Energy

  5. SOP for General Program Evaluations | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    General Program Evaluations SOP for General Program Evaluations SOP for General Program Evaluations: Quality Assurance for General Program Evaluation Studies, June 26, 2006. SOP for General Program Evaluations (1.48 MB) More Documents & Publications General Evaluation SOP 6-26 2006 PAE Evaluation Portfolio Peer Review PAE Evaluation Portfolio Peer Review

  6. Publications | Photosynthetic Antenna Research Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Publications Publications View: Publications by First Author Publications by Year Also see: Conference Abstracts Other Publications Facilities Publications Publications by First...

  7. EA-283 Public Service Company of Colorado | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3 Public Service Company of Colorado EA-283 Public Service Company of Colorado Order authorizing Public Service Company of Colorado to export electric energy to Canada. EA-283 Public Service Company of Colorado (1.65 MB) More Documents & Publications EA-223-A CMS Marketing, Services and Trading Company EA-301 WPS Energy Services EA-97-D Portland General Electric Company

  8. PUBLIC SUBMISSION

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ANDREW%20J.%20FERLIC_cover_DRAFT-0002.html[2/3/2012 12:37:00 PM] PUBLIC SUBMISSION As of: February 03, 2012 Received: December 29, 2011 Status: Pending_Post Tracking No. 80f8ad44 Comments Due: January 20, 2012 Submission Type: Web Docket: DOE-HQ-2012-0004 U.S. Department of Energy Audit Guidance: For-Profit Recipients Comment On: DOE-HQ-2012-0004-0001 Audit Guidance: For-Profit Recipients Document: DOE-HQ-2012-0004-DRAFT-0002 Comment on FR Doc # 2011-32622 Submitter Information Name: ANDREW J.

  9. PUBLIC SUBMISSION

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6.html[2/3/2012 12:44:00 PM] PUBLIC SUBMISSION As of: February 03, 2012 Received: January 19, 2012 Status: Pending_Post Tracking No. 80f9b24f Comments Due: January 20, 2012 Submission Type: Web Docket: DOE-HQ-2012-0004 U.S. Department of Energy Audit Guidance: For-Profit Recipients Comment On: DOE-HQ-2012-0004-0001 Audit Guidance: For-Profit Recipients Document: DOE-HQ-2012-0004-DRAFT-0006 Comment on FR Doc # 2011-32622 Submitter Information Name: Eric Russell Address: 836 Thurber Drive West Apt

  10. PUBLIC SUBMISSION

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2-2012%2010-10-11-600/Document%20List%2003-02-2012%2010-10-11-600_docs/Martin%20WeblerCover_DRAFT-0004.html[2/3/2012 12:40:30 PM] PUBLIC SUBMISSION As of: February 03, 2012 Received: January 05, 2012 Status: Pending_Post Tracking No. 80f8e384 Comments Due: January 20, 2012 Submission Type: Web Docket: DOE-HQ-2012-0004 U.S. Department of Energy Audit Guidance: For-Profit Recipients Comment On: DOE-HQ-2012-0004-0001 Audit Guidance: For-Profit Recipients Document: DOE-HQ-2012-0004-DRAFT-0004

  11. Public Affairs Organization Chart

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Public Affairs Organization Chart Public Affairs Communications Community Public Affairs Org Chart Education Creative Services ⇒ Navigate Section Public Affairs Communications Community Public Affairs Org Chart Education Creative Services

  12. EC Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sandia-General Motors: Advancing Clean Combustion Engines with Predictive Simulation Tools admin 2016-04-18T20:58:24+00:00 Popular Downloads Solar Energy Grid Integration Systems: Final Report of the Florida Solar Energy Center Team (11367 downloads) Modeling System Losses in PVsyst (9344 downloads) Numerical Manufacturing And Design Tool (NuMAD v2.0) for Wind Turbine Blades: User's Guide (7613 downloads) Solar Energy Grid Integration Systems (SEGIS) Proactive Intelligent Advances for

  13. EC Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    General Method for Fatigue Analysis of Vertical Axis Wind Turbine Blades admin 2016-04-18T20:58:24+00:00 Popular Downloads Solar Energy Grid Integration Systems: Final Report of the Florida Solar Energy Center Team (11368 downloads) Modeling System Losses in PVsyst (9346 downloads) Numerical Manufacturing And Design Tool (NuMAD v2.0) for Wind Turbine Blades: User's Guide (7614 downloads) Solar Energy Grid Integration Systems (SEGIS) Proactive Intelligent Advances for Photovoltaic Systems (6676

  14. EC Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Generalized Fitting Technique for the LIFE2 Fatigue Analysis Code admin 2016-04-18T20:58:24+00:00 Popular Downloads Solar Energy Grid Integration Systems: Final Report of the Florida Solar Energy Center Team (11368 downloads) Modeling System Losses in PVsyst (9346 downloads) Numerical Manufacturing And Design Tool (NuMAD v2.0) for Wind Turbine Blades: User's Guide (7614 downloads) Solar Energy Grid Integration Systems (SEGIS) Proactive Intelligent Advances for Photovoltaic Systems (6676

  15. Unclassified Controlled Nuclear Information General Guideline | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Unclassified Controlled Nuclear Information General Guideline Unclassified Controlled Nuclear Information General Guideline GG-5, is a record of decisions made by the Director, OC, as to what general subject areas are UCNI. Note: GG-5 may only be used by the Director, OC, to make determinations as to whether information is UCNI. All other UCNI Reviewing Officials must use UCNI guidance. UCNI General Guideline (80.31 KB) More Documents & Publications Briefing, For Persons With

  16. ARM - Publications: Science Team Meeting Documents: Publication...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Publication Trends of ARM Research Troyan, David Brookhaven National Laboratory This study summarizes the publication record of ARM research. Items of all types listed in the ARM ...

  17. EA-376 Societe Generale Energy Corp | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6 Societe Generale Energy Corp EA-376 Societe Generale Energy Corp Order authorizing Societe Generale Energy Corp to export electric energy to Canada EA-376 Societe Generale Energy Corp (3.53 MB) More Documents & Publications Application to Export Electric Energy OE Docket No. EA-376 Societe Generale Energy Corp. EA-171-D Powerex Corp. EA-145-E Powerex Corp.

  18. ARM Publications Database

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DatabaseSearch Publications Database Search Submit a Publication Would your publication make a good research highlight? Submit one now. Comments? Need a change to an existing...

  19. ARM Publications Database

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DatabaseSearchTips Publications Database Search Submit a Publication Would your publication make a good research highlight? Submit one now. Comments? Need a change to an existing...

  20. Neutron and Nuclear Science Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Publications Recent publications related to neutron and nuclear science at LANSCE. Neutron and Nuclear Science Publications Chi-Nu Publications DANCE Publications GEANIE Publications ICE House and ICE II Publications (n,z) Publications Neutron Radiography Publications SPIDER Publications Target 2 Publications TPC Publications Links Publications/Media Neutron and Nuclear Science News Profiles Events at LANSCE LANL Research Libary

  1. Financial statistics of major US publicly owned electric utilities 1993

    SciTech Connect (OSTI)

    Not Available

    1995-02-01

    The 1993 edition of the Financial Statistics of Major U.S. Publicly Owned Electric Utilities publication presents five years (1989 to 1993) of summary financial data and current year detailed financial data on the major publicly owned electric utilities. The objective of the publication is to provide Federal and State governments, industry, and the general public with current and historical data that can be used for policymaking and decision making purposes related to publicly owned electric utility issues. Generator and nongenerator summaries are presented in this publication. The primary source of publicly owned financial data is the Form EIA-412, the Annual Report of Public Electric Utilities, filed on a fiscal basis.

  2. The generalized finite element method applied to the dynamic...

    Office of Scientific and Technical Information (OSTI)

    Title: The generalized finite element method applied to the dynamic response of heterogeneous media. Authors: Robbins, Joshua ; Voth, Thomas E. Publication Date: 2013-02-01 OSTI ...

  3. Secretary Chu's Remarks to the 2011 IAEA General Conference ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Documents & Publications Secretary Steven Chu Remarks as Prepared for Delivery to the 2011 IAEA General Conference UKreport0717.pdf Before the House Committee on Foreign Affairs

  4. WAPA General Power Contract Provisions | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    WAPA General Power Contract Provisions PDF icon WAPAGeneralPowerContractProvisions.pdf More Documents & Publications WAPA Purchase of Energy Contractor Template SPR Pro Forma ...

  5. Open Geospace General Circulation Model simulation of a substorm...

    Office of Scientific and Technical Information (OSTI)

    Open Geospace General Circulation Model simulation of a substorm: Axial tail instability ... Country of Publication: United States Language: English Word Cloud More Like This Full ...

  6. PNNL: Publication Details

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Details Sorry, we cannot locate that Publication. Please try the Publications Database for other PNNL Publications. Powered By ERICA, PNNL's publication metadatabase Publications Search Publications Science as Art Calendar Magazines and Newsletters Pacific Northwest Technology Today DOE Pulse Additional Resources PNNL Technical Library PNNL Photo Library PNNL Brochure Library Related Links PNNL Technical Library

  7. Public Affairs Department

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Public Affairs Department Public Affairs Communications Community Public Affairs Org Chart Education Creative Services ⇒ Navigate Section Public Affairs Communications Community Public Affairs Org Chart Education Creative Services The Public Affairs Department serves Berkeley Lab's scientific and educational missions by: Providing timely information and perspective about scientific discoveries to all of the Lab's internal and external audiences, ranging from potential scientific collaborators

  8. A = 5 General Tables

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 General Tables The General Table for 5H is subdivided into the following categories: Cluster Model Hypernuclei Model Calculations Photodisintegration Pions The General Table for...

  9. Louisiana Title V General Permits

    SciTech Connect (OSTI)

    Boyer, B.E.; Neal, T.L.

    1995-12-31

    Title V of the Federal Clean Air Act Amendments of 1990 requires federal operating permits for all major sources of air pollution. In 1992, Title 40, Part 70 of the Code of Federal Regulations (40 CFR Part 70) codified the law s requirements. These federal regulations, entitled Operating Permit Program, define the minimum requirements for state administered operating permit programs. The intent of Title V is to put into one document all requirements of an operating permit. General Permits for oil and gas facilities may be preferred if the facility can comply with all permit requirements. If greater flexibility than allowed by the General Permit is required, then the facility should apply for an individual Title V permit. General Permits are designed to streamline the permitting process, shorten the time it takes to obtain approval for initial and modified permits. The advantages of the General Permit include reduced paperwork and greater consistency because the permits are standardized. There should be less uncertainty because permit requirements will be known at the time of application. Approval times for Initial and modified General Permits should be reduced. Lengthy public notice procedures (and possible hearings) will be required for only the initial approval of the General Permit and not for each applicant to the permit. A disadvantage of General Permits is reduced flexibility since the facility must comply with the requirements of a standardized permit.

  10. Public Involvement and Communications Committee - Transcribed...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and implications o Focus on progress o Explain outcomes of CD when available Page 1 Lessons Learned Start with LCD (general public that doesn't know anything about...

  11. 8C General Tables

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    C General Tables The General Table for 8C is subdivided into the following categories: Reviews Other Theoretical Work...

  12. 6Be General Tables

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6Be General Table The General Table for 6Be is subdivided into the following categories: Cluster Model Model Calculations...

  13. ARM - Publications Procedures

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govPublicationsPublications Procedures Page Contents Types of ARM Publications Process for Publishing Planning Documents Science Reports Conference Documents Public Information Materials Recommendation for Journal Articles Proper Acknowledgments Publications Procedures Types of ARM Publications There are two main types of publications in ARM: (1) planning documents and (2) science reports. Planning documents include the ARM Program Plan, Science Plan, Locale Recommendation Plan, and Site

  14. Publications | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Publications Publications Photo courtesy of ©iStockphoto.com/Samohin Photo courtesy of ©iStockphoto.com/Samohin The EERE Publication and Product Library will allow you to find publications and products provided by the DOE's Office of Energy Efficiency and Renewable Energy specifically for our constituents. This database will allow you to do the following: Search for publications and products Download or view publications online Request a copy to be mailed to you. Visit the EERE Publication

  15. Financial statistics of selected publicly owned electric utilities 1989. [Contains glossary

    SciTech Connect (OSTI)

    Not Available

    1991-02-06

    The Financial Statistics of Selected Publicly Owned Electric Utilities publication presents summary and detailed financial accounting data on the publicly owned electric utilities. The objective of the publication is to provide the Federal and State governments, industry, and the general public with data that can be used for policymaking and decision making purposes relating to publicly owned electric utility issues. 21 tabs.

  16. PIA - Energy Inspector General Project Tracking System (EIGPT) | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Inspector General Project Tracking System (EIGPT) PIA - Energy Inspector General Project Tracking System (EIGPT) PIA - Energy Inspector General Project Tracking System (EIGPT) PIA - Energy Inspector General Project Tracking System (EIGPT) (72.55 KB) More Documents & Publications PIA - FOIAXpress PIA - INL SECURITY INFORMATION MANAGEMENT SYSTEM BUSINESS ENCLAVE PIA - INL PeopleSoft - Human Resource System

  17. General Compression Looks at Energy Storage from a Different Angle |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy General Compression Looks at Energy Storage from a Different Angle General Compression Looks at Energy Storage from a Different Angle February 3, 2011 - 3:36pm Addthis Image of the General Compression CAES system | courtesy of General Compression, Inc. Image of the General Compression CAES system | courtesy of General Compression, Inc. April Saylor April Saylor Former Digital Outreach Strategist, Office of Public Affairs Earlier this week, we told you about a new company

  18. General Restaurant Equipment: Order (2016-CE-53010) | Department of Energy

    Office of Environmental Management (EM)

    Department of Energy General Compression Looks at Energy Storage from a Different Angle General Compression Looks at Energy Storage from a Different Angle February 3, 2011 - 3:36pm Addthis Image of the General Compression CAES system | courtesy of General Compression, Inc. Image of the General Compression CAES system | courtesy of General Compression, Inc. April Saylor April Saylor Former Digital Outreach Strategist, Office of Public Affairs Earlier this week, we told you about a new company

  19. Chapter 9 of the Wyoming Public Service Commission Regulations...

    Open Energy Info (EERE)

    9 of the Wyoming Public Service Commission Regulations: General Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- RegulationRegulation:...

  20. QER Public Meeting in Denver, CO: Gas-Electricity Interdependencies...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    President and CEO, Public Service Company of Colorado - Written Statement PDF icon Curtis Moffatt, Deputy General Counsel and Vice President - Gas Legal, Kinder Morgan, Inc. -...

  1. Chapter 2 of the Wyoming Public Service Commission Regulations...

    Open Energy Info (EERE)

    2 of the Wyoming Public Service Commission Regulations: General Regulations Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- RegulationRegulation:...

  2. Quadrennial Energy Review Public Meeting: Water-Energy Nexus

    Broader source: Energy.gov (indexed) [DOE]

    Quadrennial Energy Review Public Meeting: Water-Energy Nexus Statement of Nathan Bracken Assistant Director and General Counsel Western States Water Council June 19, 2014 I. ...

  3. Sandia Energy - PV Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Publications Home Stationary Power Energy Conversion Efficiency Solar Energy Photovoltaics PV Publications PV PublicationsTara Camacho-Lopez2016-01-05T23:50:37+00:00 Recent...

  4. Public Notifications | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Public Meetings and Comment Deadlines Public Meetings and Comment Deadlines The Department of Energy (DOE) provides the public with an opportunity to participate in meetings to discuss proposed changes to rulemakings and product standards. The table below lists all upcoming public meeting and comment close dates, and provides links to the relevant Federal Register notices. If there are no entries, no public meetings are scheduled at this time. Below the table there are general instructions for

  5. Public Outreach committee meeting

    Broader source: Energy.gov [DOE]

    The ORSSAB Public Outreach Committee meeting is open to the public. The conference call information will be provided as the meeting approaches.

  6. Public Assembly Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    Most public assembly buildings were not large convention centers or entertainment arenas; about two-fifths fell into the smallest size category. About one-fifth of public...

  7. Commitment to Public Involvement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Create a Sustainable Future Commitment to Public Involvement Commitment to Public Involvement LANL is committed to our neighbors August 1, 2013 Lab Director McMillan talks with...

  8. Small Business News, Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Small Business News, Publications Small Business News, Publications Setting new standards and small business initiatives within NNSA that will contribute to developing and...

  9. Public Housing Project Performance Benchmarks

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Public Housing Project Performance Benchmarks (All ASHRAE Zones) We define an ESCO as a company that provides energy efficiency-related and other value-added services and that employs performance contracting as a core part of its energy efficiency services business. 1 For projects with electricity savings, we assume site energy conversion (1 kWh = 3,412 Btu). We did not estimate avoided Btus from gallons of water conserved. In general, we followed the analytical approach documented in Hopper et

  10. 7He General Tables

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    He General Table The General Table for 7He is subdivided into the following categories: Experimental Theoretical Model Calculations Hypernuclei and Mesons Pions