National Library of Energy BETA

Sample records for gdp labor force

  1. New Contract Helps Portsmouth GDP Cleanup

    Broader source: Energy.gov [DOE]

    To accelerate the Portsmouth GDP cleanup efforts left over from the Cold War, the Department of Energy made a huge step forward in our nuclear environmental cleanup efforts.

  2. Accommodation of GDP-Linked Sugars in the Active Site of GDP-Perosamine Synthase

    SciTech Connect (OSTI)

    Cook, Paul D.; Carney, Amanda E.; Holden, Hazel M.

    2009-01-12

    Perosamine (4-amino-4,6-dideoxy-d-mannose), or its N-acetylated form, is one of several dideoxy sugars found in the O-antigens of such infamous Gram-negative bacteria as Vibrio cholerae O1 and Escherichia coli O157:H7. It is added to the bacterial O-antigen via a nucleotide-linked version, namely GDP-perosamine. Three enzymes are required for the biosynthesis of GDP-perosamine starting from mannose 1-phosphate. The focus of this investigation is GDP-perosamine synthase from Caulobacter crescentus, which catalyzes the final step in GDP-perosamine synthesis, the conversion of GDP-4-keto-6-deoxymannose to GDP-perosamine. The enzyme is PLP-dependent and belongs to the aspartate aminotransferase superfamily. It contains the typically conserved active site lysine residue, which forms a Schiff base with the PLP cofactor. Two crystal structures were determined for this investigation: a site-directed mutant protein (K186A) complexed with GDP-perosamine and the wild-type enzyme complexed with an unnatural ligand, GDP-3-deoxyperosamine. These structures, determined to 1.6 and 1.7 {angstrom} resolution, respectively, revealed the manner in which products, and presumably substrates, are accommodated within the active site pocket of GDP-perosamine synthase. Additional kinetic analyses using both the natural and unnatural substrates revealed that the K{sub m} for the unnatural substrate was unperturbed relative to that of the natural substrate, but the k{sub cat} was lowered by a factor of approximately 200. Taken together, these studies shed light on why GDP-perosamine synthase functions as an aminotransferase whereas another very similar PLP-dependent enzyme, GDP-4-keto-6-deoxy-d-mannose 3-dehydratase or ColD, catalyzes a dehydration reaction using the same substrate.

  3. labor day

    National Nuclear Security Administration (NNSA)

    0%2A en Labor Day Weekend 2015 http:nnsa.energy.govbloglabor-day-weekend-2015

    Labor Day is dedicated to the achievements of American workers and the contributions they made...

  4. Labor Relations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Relations also provides technical assistance to, and coordination of, the Partnership Council and other labor-management forums. Collective Bargaining Agreements BPA AFGE...

  5. Roughness Optimization at High Modes for GDP CHx Microshells

    SciTech Connect (OSTI)

    Theobald, M.; Dumay, B.; Chicanne, C.; Barnouin, J.; Legaie, O.; Baclet, P.

    2004-03-15

    For the ''Megajoule'' Laser (LMJ) facility of the CEA, amorphous hydrogenated carbon (a-C:H) is the nominal ablator to be used for inertial confinement fusion (ICF) experiments. These capsules contain the fusible deuterium-tritium mixture to achieve ignition. Coatings are prepared by glow discharge polymerization (GDP) with trans-2-butene and hydrogen. The films properties have been investigated. Laser fusion targets must have optimized characteristics: a diameter of about 2.4 mm for LMJ targets, a thickness up to 175 {mu}m, a sphericity and a thickness concentricity better than 99% and an outer and an inner roughness lower than 20 nm at high modes. The surface finish of these laser fusion targets must be extremely smooth to minimize hydrodynamic instabilities.Movchan and Demchishin, and later Thornton introduced a structure zone model (SZM) based on both evaporated and sputtered metals. They investigated the influence of base temperature and the sputtering gas pressure on structure and properties of thick polycrystalline coatings of nickel, titanium, tungsten, aluminum oxide. An original cross-sectional analysis by atomic force microscopy (AFM) allows amorphous materials characterization and permits to make an analogy between the amorphous GDP material and the existing model (SZM). The purpose of this work is to understand the relationship between the deposition parameters, the growing structures and the surface roughness.The coating structure as a function of deposition parameters was first studied on plane silicon substrates and then optimized on PAMS shells. By adjusting the coating parameters, the structures are modified, and in some case, the high modes roughness decreases dramatically.

  6. Labor Relations

    Broader source: Energy.gov [DOE]

    Addressing Poor Performance What Happens if an Employee’s Performance is Below the Meets Expectations (ME) level? Any time during the appraisal period an employee demonstrates that he/she is performing below the ME level in at least one critical element, the Rating Official should contact his/her Human Resources Office for guidance and: •If performance is at the Needs Improvement (NI) level; issue the employee a Performance Assistance Plan (PAP); or •If performance is at the Fails to Meet Expectations (FME) level; issue the employee a Performance Improvement Plan (PIP). Department of Energy Headquarters and The National Treasury Employees Union (NTEU) Collective Bargaining Agreement The National Treasury Employees Union (NTEU) is the exclusive representative of bargaining unit employees at the Department of Energy Headquarters offices in the Washington DC metropolitan area. The terms and conditions of this agreement have been negotiated by DOE and NTEU, and prescribe their respective rights and obligations in matters related to conditions of employment. Headquarters 1187 Request For Payroll Deductions For Labor Organization Dues The Request for Payroll Deduction for Labor Organization Dues (SF-1187) permits eligible employees, who are members of the National Treasury Employees Union (NTEU), to authorize voluntary allotments from their compensation. Headquarters 1188 Cancellation Of Payroll Deductions For Labor Organization Dues The Cancellation of Payroll Deductions for Labor Organizations Dues (SF-1188) permits eligible employees, who are members of the National Treasury Employees Union (NTEU), to cancel dues allotments. The National Treasury Employees Union, Collective Bargaining Agreement, Article 9 – Dues Withholding This article is for the purpose of permitting eligible employees, who are members of the National Treasury Employees Union (NTEU), to authorize voluntary allotments from their compensation.

  7. Structures of NodZ ?1,6-fucosyltransferase in complex with GDP and GDP-fucose

    SciTech Connect (OSTI)

    Brzezinski, Krzysztof; Dauter, Zbigniew; Jaskolski, Mariusz

    2012-02-01

    Crystal structures of the bacterial ?1,6-fucosyltransferase NodZ in complex with GDP and GDP-fucose are presented. Rhizobial NodZ ?1,6-fucosyltransferase (?1,6-FucT) catalyzes the transfer of the fucose (Fuc) moiety from guanosine 5?-diphosphate-?-l-fucose to the reducing end of the chitin oligosaccharide core during Nod-factor (NF) biosynthesis. NF is a key signalling molecule required for successful symbiosis with a legume host for atmospheric nitrogen fixation. To date, only two ?1,6-FucT structures have been determined, both without any donor or acceptor molecule that could highlight the structural background of the catalytic mechanism. Here, the first crystal structures of ?1,6-FucT in complex with its substrate GDP-Fuc and with GDP, which is a byproduct of the enzymatic reaction, are presented. The crystal of the complex with GDP-Fuc was obtained through soaking of native NodZ crystals with the ligand and its structure has been determined at 2.35 resolution. The fucose residue is exposed to solvent and is disordered. The enzymeproduct complex crystal was obtained by cocrystallization with GDP and an acceptor molecule, penta-N-acetyl-l-glucosamine (penta-NAG). The structure has been determined at 1.98 resolution, showing that only the GDP molecule is present in the complex. In both structures the ligands are located in a cleft formed between the two domains of NodZ and extend towards the C-terminal domain, but their conformations differ significantly. The structures revealed that residues in three regions of the C-terminal domain, which are conserved among ?1,2-, ?1,6- and protein O-fucosyltransferases, are involved in interactions with the sugar-donor molecule. There is also an interaction with the side chain of Tyr45 in the N-terminal domain, which is very unusual for a GT-B-type glycosyltransferase. Only minor conformational changes of the protein backbone are observed upon ligand binding. The only exception is a movement of the loop located between

  8. Oil-Consumption-Weighted GDP: Description, Calculation, and Comparison

    U.S. Energy Information Administration (EIA) Indexed Site

    Oil-Consumption-Weighted GDP: Description, Calculation, and Comparison Vipin Arora, Tyler Hodge, and Tancred Lidderdale May 2016 Independent Statistics & Analysis www.eia.gov U.S. Energy Information Administration Washington, DC 20585 This paper is released to encourage discussion and critical comment. The analysis and conclusions expressed here are those of the authors and not necessarily those of the U.S. Energy Information Administration. Our thanks to Vinay Tripathi, summer intern from

  9. Structures of NodZ [alpha]1,6-fucosyltransferase in complex with GDP and GDP-fucose

    SciTech Connect (OSTI)

    Brzezinski, Krzysztof; Dauter, Zbigniew; Jaskolski, Mariusz

    2012-03-26

    Rhizobial NodZ {alpha}1,6-fucosyltransferase ({alpha}1,6-FucT) catalyzes the transfer of the fucose (Fuc) moiety from guanosine 5'-diphosphate-{beta}-L-fucose to the reducing end of the chitin oligosaccharide core during Nod-factor (NF) biosynthesis. NF is a key signaling molecule required for successful symbiosis with a legume host for atmospheric nitrogen fixation. To date, only two {alpha}1,6-FucT structures have been determined, both without any donor or acceptor molecule that could highlight the structural background of the catalytic mechanism. Here, the first crystal structures of {alpha}1,6-FucT in complex with its substrate GDP-Fuc and with GDP, which is a byproduct of the enzymatic reaction, are presented. The crystal of the complex with GDP-Fuc was obtained through soaking of native NodZ crystals with the ligand and its structure has been determined at 2.35 {angstrom} resolution. The fucose residue is exposed to solvent and is disordered. The enzyme-product complex crystal was obtained by cocrystallization with GDP and an acceptor molecule, penta-N-acetyl-L-glucosamine (penta-NAG). The structure has been determined at 1.98 {angstrom} resolution, showing that only the GDP molecule is present in the complex. In both structures the ligands are located in a cleft formed between the two domains of NodZ and extend towards the C-terminal domain, but their conformations differ significantly. The structures revealed that residues in three regions of the C-terminal domain, which are conserved among {alpha}1,2-, {alpha}1,6- and protein O-fucosyltransferases, are involved in interactions with the sugar-donor molecule. There is also an interaction with the side chain of Tyr45 in the N-terminal domain, which is very unusual for a GT-B-type glycosyltransferase. Only minor conformational changes of the protein backbone are observed upon ligand binding. The only exception is a movement of the loop located between strand {beta}C2 and helix {alpha}C3. In addition, there is

  10. Labor Relations | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Relations Labor Relations The National Labor Relations Act prohibits unfair labor practices, including discrimination in employment to discourage (or encourage) membership in a union, and engaging in bad faith collective bargaining. National Labor Relations Act DOE Training Slides are available below: National Labor Relations Act (2.53 MB) National Labor Relations Act 101 (1.25 MB)

  11. Cloning and characterization of GDP-perosamine synthetase (Per) from Escherichia coli O157:H7 and synthesis of GDP-perosamine in vitro

    SciTech Connect (OSTI)

    Zhao Guohui; Liu Jun; Liu Xiang; Chen Min; Zhang Houcheng Wang, Peng George

    2007-11-23

    GDP-perosamine synthetase (Per, E.C. not yet classified) is important to the synthesis of Escherichia coli O157:H7 O-antigen. The mutant in per gene can disrupt the synthesis of O157 O-antigen. In this study, GDP-perosamine synthetase was cloned from E. coli O157:H7 and over-expressed in E. coli BL21 (DE3). The recombinant His-tagged Per fusion protein was a decamer with molecular weight of 431 kDa. The optimal pH value of this recombinant protein was 7.5. The divalent ions had no significant effect on Per-catalyzed reaction. The K{sub m} and K{sub cat}/K{sub m} for GDP-4-keto-6-deoxy-D-mannose were 0.09 mM and 2.1 x 10{sup 5} M{sup -1} S{sup -1}, and those for L-glutamate were 2 mM and 0.52 x 10{sup 5} M{sup -1}S{sup -1}, respectively. Per was used to synthesize GDP-perosamine from GDP-mannose together with recombinant GDP-mannose dehydratase (GMD, E.C. 4.2.1.47). The purified GDP-perosamine was identified by MS and NMR. In summary, this work provided a feasible approach for the synthesis of GDP-perosamine which can lead to the study of LPS biosynthesis of pathogenic E. coli O157:H7.

  12. Mechanical Properties of Thin GDP Shells Used as Cryogenic Direct Drive Targets at OMEGA

    SciTech Connect (OSTI)

    Nikroo, A.; Czechowicz, D.G.; Chen, K.C.; Dicken, M.; Morris, C.; Andrews, R.; Greenwood, A.; Castillo, E.

    2004-03-15

    Thin glow discharge polymer (GDP) shells are currently used as the targets for cryogenic direct drive laser fusion experiments. These shells need to be filled with nearly 1000 atm of D{sub 2} and cooled to cryogenic temperatures without failing due to buckling and bursting pressures they experience in this process. Therefore, the mechanical and permeation properties of these shells are of utmost importance in successful and rapid filling with D{sub 2}. In this paper, we present an overview of buckle and burst pressures of several different types of GDP shells. These include those made using traditional GDP deposition parameters ('standard GDP') using a high deposition pressure and using modified parameters ('strong GDP') of low deposition pressure that leads to more robust shells.

  13. MECHANICAL PROPERTIES OF THIN GDP SHELLS USED AS CRYOGENIC DIRECT DRIVE TARGETS AT OMEGA

    SciTech Connect (OSTI)

    NIKROO,A; CZECHOWICZ,D; CHEN,K.C; DICKEN,M; MORRIS,C; ANDREWS,R; GREENWOOD,A.L; CASTILLO,E

    2003-06-01

    OAK-B135 Thin glow discharge polymer (GDP) shells are currently used as the targets for cryogenic direct drive laser fusion experiments. These shells need to be filled with nearly 1000 atm of D{sub 2} and cooled to cryogenic temperatures without failing due to buckling and bursting pressures they experience in this process. Therefore, the mechanical and permeation properties of these shells are of utmost importance in successful and rapid filling with D{sub 2}. In this paper, they present an overview of buckle and burst pressures of several different types of GDP shells. These include those made using traditional GDP deposition parameters (standard GDP) using a high deposition pressure and using modified parameters (strong GDP) of low deposition pressure that leads to more robust shells.

  14. Biochemical characterization of GDP-L-fucose de novo synthesis pathway in fungus Mortierella alpina

    SciTech Connect (OSTI)

    Ren, Yan; Perepelov, Andrei V.; Wang, Haiyan; Zhang, Hao; Knirel, Yuriy A.; Wang, Lei; Chen, Wei

    2010-01-22

    Mortierella alpina is a filamentous fungus commonly found in soil, which is able to produce large amount of polyunsaturated fatty acids. L-Fucose is an important sugar found in a diverse range of organisms, playing a variety of biological roles. In this study, we characterized the de novo biosynthetic pathway of GDP-L-fucose (the nucleotide-activated form of L-fucose) in M. alpina. Genes encoding GDP-D-mannose 4,6-dehydratase (GMD) and GDP-keto-6-deoxymannose 3,5-epimerase/4-reductase (GMER) were expressed heterologously in Escherichia coli. The recombinant enzymes were produced as His-tagged fusion proteins. Conversion of GDP-mannose to GDP-4-keto-6-deoxy mannose by GMD and GDP-4-keto-6-deoxy mannose to GDP-L-fucose by GMER were analyzed by capillary electrophoresis, electro-spray ionization-mass spectrometry, and nuclear magnetic resonance spectroscopy. The k{sub m} values of GMD for GDP-mannose and GMER for GDP-4-keto-6-deoxy mannose were determined to be 0.77 mM and 1.047 mM, respectively. Both NADH and NADPH may be used by GMER as the coenzyme. The optimum temperature and pH were determined to be 37 {sup o}C and pH 9.0 (GMD) or pH 7.0 (GMER). Divalent cations are not required for GMD and GMER activity, and the activities of both enzymes may be enhanced by DTT. To our knowledge this is the first report on the characterization of GDP-L-fucose biosynthetic pathway in fungi.

  15. Crystal structure of a tetrameric GDP-D-mannose 4,6-dehydratase from a bacterial GDP-D-rhamnose biosynthetic pathway

    SciTech Connect (OSTI)

    Webb, N.A.; Mulichak, A.M.; Lam, J.S.; Rocchetta, H.L.; Garavito, R.M.

    2010-03-08

    D-Rhamnose is a rare 6-deoxy monosaccharide primarily found in the lipopolysaccharide of pathogenic bacteria, where it is involved in host-bacterium interactions and the establishment of infection. The biosynthesis of D-rhamnose proceeds through the conversion of GDP-D-mannose by GDP-D-mannose 4,6-dehydratase (GMD) to GDP-4-keto-6-deoxymannose, which is subsequently reduced to GDP-D-rhamnose by a reductase. We have determined the crystal structure of GMD from Pseudomonas aeruginosa in complex with NADPH and GDP. GMD belongs to the NDP-sugar modifying subfamily of the short-chain dehydrogenase/reductase (SDR) enzymes, all of which exhibit bidomain structures and a conserved catalytic triad (Tyr-XXX-Lys and Ser/Thr). Although most members of this enzyme subfamily display homodimeric structures, this bacterial GMD forms a tetramer in the same fashion as the plant MUR1 from Arabidopsis thaliana. The cofactor binding sites are adjoined across the tetramer interface, which brings the adenosyl phosphate moieties of the adjacent NADPH molecules to within 7 {angstrom} of each other. A short peptide segment (Arg35-Arg43) stretches into the neighboring monomer, making not only protein-protein interactions but also hydrogen bonding interactions with the neighboring cofactor. The interface hydrogen bonds made by the Arg35-Arg43 segment are generally conserved in GMD and MUR1, and the interacting residues are highly conserved among the sequences of bacterial and eukaryotic GMDs. Outside of the Arg35-Arg43 segment, residues involved in tetrameric contacts are also quite conserved across different species. These observations suggest that a tetramer is the preferred, and perhaps functionally relevant, oligomeric state for most bacterial and eukaryotic GMDs.

  16. Labor and nuclear power

    SciTech Connect (OSTI)

    Logan, R.; Nelkin, D.

    1980-03-01

    The AFL-CIO is officially pro-nuclear, but tensions within unions are taking issue over ideological differences. The Labor movement, having looked to nuclear power development as an economic necessity to avoid unemployment, has opposed efforts to delay construction or close plants. As many as 42% of union members or relatives of members, however, were found to oppose new power plants, some actively working against specific construction projects. The United Mine Workers and Teamsters actively challenged the nuclear industry while the auto workers have been ambivalent. The differences between union orientation reflects the history of unionism in the US and explains the emergence of social unionism with its emphasis on safety and working conditions as well as economic benefits. Business union orientation trends to prevail during periods of prosperity; social unions during recessions. The labor unions and the environmentalists are examined in this conext and found to be hopeful. 35 references. (DCK)

  17. A Rac1--GDP trimer complex binds zinc with tetrahedral and octahedral coordination, displacing magnesium

    SciTech Connect (OSTI)

    Prehna, G.; Stebbins, C

    2007-01-01

    The Rho family of small GTPases represent well characterized signaling molecules that regulate many cellular functions such as actin cytoskeletal arrangement and the cell cycle by acting as molecular switches. A Rac1-GDP-Zn complex has been crystallized in space group P3221 and its crystal structure has been solved at 1.9 {angstrom} resolution. These trigonal crystals reveal the unexpected ability of Rac1 to coordinate Zn atoms in a tetrahedral fashion by use of its biologically relevant switch I and switch II regions. Upon coordination of zinc, the switch I region is stabilized in the GDP-bound conformation and contributes to a Rac1 trimer in the asymmetric unit. Zinc coordination causes switch II to adopt a novel conformation with a symmetry-related molecule. Additionally, zinc was found to displace magnesium from its octahedral coordination at switch I, although GDP binding remained stable. This structure represents the first reported Rac1-GDP-Zn complex, which further underscores the conformational flexibility and versatility of the small GTPase switch regions.

  18. A Rac1-GDP Trimer Complex Binds Zinc with Tetrahedral and Octahedral Coordination, Displacing Magnesium

    SciTech Connect (OSTI)

    Prehna,G.; Stebbins, E.

    2007-01-01

    The Rho family of small GTPases represent well characterized signaling molecules that regulate many cellular functions such as actin cytoskeletal arrangement and the cell cycle by acting as molecular switches. A Rac1-GDP-Zn complex has been crystallized in space group P3{sub 2}21 and its crystal structure has been solved at 1.9 {angstrom} resolution. These trigonal crystals reveal the unexpected ability of Rac1 to coordinate Zn atoms in a tetrahedral fashion by use of its biologically relevant switch I and switch II regions. Upon coordination of zinc, the switch I region is stabilized in the GDP-bound conformation and contributes to a Rac1 trimer in the asymmetric unit. Zinc coordination causes switch II to adopt a novel conformation with a symmetry-related molecule. Additionally, zinc was found to displace magnesium from its octahedral coordination at switch I, although GDP binding remained stable. This structure represents the first reported Rac1-GDP-Zn complex, which further underscores the conformational flexibility and versatility of the small GTPase switch regions.

  19. Unions, LANL sign labor agreements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Unions, LANL sign labor agreements Unions, LANL sign labor agreements The New Mexico Building and Construction Trades Council and Los Alamos National Security LLC, announced the signing of a series of labor agreements that affect nearly 750 construction and maintenance workers. September 21, 2012 Jay Johnson renews the contracts with the Laboratory's union workers. Jay Johnson (left) associate director for maintenance and infrastructure planning, renews the contracts with the Laboratory's union

  20. Cloning, purification and preliminary crystallographic analysis of the Bacillus subtilis GTPase YphCGDP complex

    SciTech Connect (OSTI)

    Xu, Ling; Muench, Stephen P.; Roujeinikova, Anna; Sedelnikova, Svetlana E.; Rice, David W.

    2006-05-01

    Crystals of a selenomethionine-incorporated YphCGDP complex have been grown using the hanging-drop vapour-diffusion method and polyethylene glycol as a precipitating agent. The Bacillus subtilis YphC gene encodes an essential GTPase thought to be involved in ribosome binding and whose protein product may represent a target for the development of a novel antibacterial agent. Sequence analysis reveals that YphC belongs to the EngA family of GTPases, which uniquely contain two adjacent GTP-binding domains. Crystals of a selenomethionine-incorporated YphCGDP complex have been grown using the hanging-drop vapour-diffusion method and polyethylene glycol as a precipitating agent. The crystals belong to space group P2{sub 1}2{sub 1}2{sub 1}, with unit-cell parameters a = 62.71, b = 65.05, c = 110.61 , and have one molecule in the asymmetric unit. Data sets at three different wavelengths were collected on a single crystal to 2.5 resolution at the Daresbury SRS in order to solve the structure by MAD. Ultimately, analysis of YphC in complex with GDP may allow a greater understanding of the EngA family of essential GTPases.

  1. Characterization of a Ras Mutant with Identical GDP- and GTP-Bound Structures

    SciTech Connect (OSTI)

    Ford, B.; Boykevisch, S; Zhao, C; Kunzelmann, S; Bar-Sagi, D; Herrmann, C; Nassar, N

    2009-01-01

    We previously characterized the G60A mutant of Ras and showed that the switch regions of the GTP-bound but not the GDP-bound form of this mutant adopt an 'open conformation' similar to that seen in nucleotide-free Ras. Here, we mutate Lys147 of the conserved {sup 145}SAK{sup 147} motif in the G60A background and characterize the resulting double mutant (DM). We show that RasDM is the first structure of a Ras protein with identical GDP- and GTP-bound structures. Both structures adopt the open conformation of the active form of RasG60A. The increase in the accessible surface area of the nucleotide is consistent with a 4-fold increase in its dissociation rate. Stopped-flow experiments show no major difference in the two-step kinetics of association of GDP or GTP with the wild type, G60A, or RasDM. Addition of Sos fails to accelerate nucleotide exchange. Overexpression of the G60A or double mutant of Ras in COS-1 cells fails to activate Erk and shows a strong dominant negative effect. Our data suggest that flexibility at position 60 is required for proper Sos-catalyzed nucleotide exchange and that structural information is somehow shared among the switch regions and the different nucleotide binding motifs.

  2. Structural basis of GDP release and gating in G protein coupled Fe[superscript 2+] transport

    SciTech Connect (OSTI)

    Guilfoyle, Amy; Maher, Megan J.; Rapp, Mikaela; Clarke, Ronald; Harrop, Stephen; Jormakka, Mika

    2009-09-29

    G proteins are key molecular switches in the regulation of membrane protein function and signal transduction. The prokaryotic membrane protein FeoB is involved in G protein coupled Fe{sup 2+} transport, and is unique in that the G protein is directly tethered to the membrane domain. Here, we report the structure of the soluble domain of FeoB, including the G protein domain, and its assembly into an unexpected trimer. Comparisons between nucleotide free and liganded structures reveal the closed and open state of a central cytoplasmic pore, respectively. In addition, these data provide the first observation of a conformational switch in the nucleotide-binding G5 motif, defining the structural basis for GDP release. From these results, structural parallels are drawn to eukaryotic G protein coupled membrane processes.

  3. Chapter 22 - Labor Standards for Construction | Department of...

    Office of Environmental Management (EM)

    2 - Labor Standards for Construction Chapter 22 - Labor Standards for Construction Chapter 22.1 - Labor Standards More Documents & Publications Department of Energy (DOE)...

  4. Labor Standards Training - Albuquerque Service Center 3-9-16...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Standards Training - Albuquerque Service Center 3-9-16 Labor Standards Training - Albuquerque Service Center 3-9-16 Labor Standards Training PDF icon Labor Standards Training - ...

  5. Solar Installation Labor Market Analysis

    SciTech Connect (OSTI)

    Friedman, B.; Jordan, P.; Carrese, J.

    2011-12-01

    The potential economic benefits of the growing renewable energy sector have led to increased federal, state, and local investments in solar industries, including federal grants for expanded workforce training for U.S. solar installers. However, there remain gaps in the data required to understand the size and composition of the workforce needed to meet the demand for solar power. Through primary research on the U.S. solar installation employer base, this report seeks to address that gap, improving policymakers and other solar stakeholders understanding of both the evolving needs of these employers and the economic opportunity associated with solar market development. Included are labor market data covering current U.S. employment, expected industry growth, and employer skill preferences for solar installation-related occupations. This study offers an in-depth look at the solar installation sectors. A study published by the Solar Foundation in October 2011 provides a census of labor data across the entire solar value chain.

  6. protective force

    National Nuclear Security Administration (NNSA)

    ntex%20-%20protective%20force%20-%20edited.jpg" alt"successfully completed a recent assessment by the U.S. Department " >

    Members of Pantex's Protective Force on...

  7. Mutational, Structural, and Kinetic Evidence for a Dissociative Mechanism in the GDP-mannose Mannosyl Hydrolase Reaction

    SciTech Connect (OSTI)

    Xia,Z.; Azurmendi, H.; lairson, L.; Withers, S.; Gabelli, S.; Bianchet, M.; Amzel, L.; Mildvan, A.

    2005-01-01

    GDP-mannose hydrolase (GDPMH) catalyzes the hydrolysis of GDP-{alpha}-D-sugars by nucleophilic substitution with inversion at the anomeric C1 atom of the sugar, with general base catalysis by H124. Three lines of evidence indicate a mechanism with dissociative character. First, in the 1.3 Angstrom X-ray structure of the GDPMH-Mg{sup 2+}-GDP{center_dot}Tris{sup +} complex, the GDP leaving group interacts with five catalytic components: R37, Y103, R52, R65, and the essential Mg{sup 2+}. As determined by the effects of site-specific mutants on k{sub cat}, these components contribute factors of 24-, 100-, 309-, 24-, and {ge}10{sup 5}-fold, respectively, to catalysis. Both R37 and Y103 bind the {beta}-phosphate of GDP and are only 5.0 Angstroms apart. Accordingly, the R37Q/Y103F double mutant exhibits partially additive effects of the two single mutants on k{sub cat}, indicating cooperativity of R37 and Y103 in promoting catalysis, and antagonistic effects on K{sub m}. Second, the conserved residue, D22, is positioned to accept a hydrogen bond from the C2-OH group of the sugar undergoing substitution at C1, as was shown by modeling an {alpha}-D-mannosyl group into the sugar binding site. The D22A and D22N mutations decreased k{sub cat} by factors of 10{sup 2.1} and 10{sup 2.6}, respectively, for the hydrolysis of GDP-{alpha}-D-mannose, and showed smaller effects on K{sub m}, suggesting that the D22 anion stabilizes a cationic oxocarbenium transition state. Third, the fluorinated substrate, GDP-2F-{alpha}-D-mannose, for which a cationic oxocarbenium transition state would be destabilized by electron withdrawal, exhibited a 16-fold decrease in k{sub cat} and a smaller, 2.5-fold increase in K{sub m}. The D22A and D22N mutations further decreased the k{sub cat} with GDP-2F-{alpha}-D-mannose to values similar to those found with GDP-{alpha}-D-mannose, and decreased the K{sub m} of the fluorinated substrate. The choice of histidine as the general base over glutamate, the

  8. air force

    National Nuclear Security Administration (NNSA)

    en NNSA, Air Force Complete Successful B61-12 Life Extension Program Development Flight Test at Tonopah Test Range http:nnsa.energy.govmediaroompressreleases...

  9. Helix Dipole Movement and Conformational Variability Contribute to Allosteric GDP Release in G[alpha] Subunits

    SciTech Connect (OSTI)

    Preininger, Anita M.; Funk, Michael A.; Oldham, William M.; Meier, Scott M.; Johnston, Christopher A.; Adhikary, Suraj; Kimple, Adam J.; Siderovski, David P.; Hamm, Heidi E.; Iverson, Tina M.

    2009-06-01

    Heterotrimeric G proteins (Galphabetagamma) transmit signals from activated G protein-coupled receptors (GPCRs) to downstream effectors through a guanine nucleotide signaling cycle. Numerous studies indicate that the carboxy-terminal alpha5 helix of Galpha subunits participates in Galpha-receptor binding, and previous EPR studies suggest this receptor-mediated interaction induces a rotation and translation of the alpha5 helix of the Galpha subunit [Oldham, W. M., et al. (2006) Nat. Struct. Mol. Biol. 13, 772-777]. On the basis of this result, an engineered disulfide bond was designed to constrain the alpha5 helix of Galpha(i1) into its EPR-measured receptor-associated conformation through the introduction of cysteines at position 56 in the alpha1 helix and position 333 in the alpha5 helix (I56C/Q333C Galpha(i1)). A functional mimetic of the EPR-measured alpha5 helix dipole movement upon receptor association was additionally created by introduction of a positive charge at the amino terminus of this helix, D328R Galpha(i1). Both proteins exhibit a dramatically elevated level of basal nucleotide exchange. The 2.9 A resolution crystal structure of I56C/Q333C Galpha(i1) in complex with GDP-AlF(4)(-) reveals the shift of the alpha5 helix toward the guanine nucleotide binding site that is anticipated by EPR measurements. The structure of the I56C/Q333C Galpha(i1) subunit further revealed altered positions for the switch regions and throughout the Galpha(i1) subunit, accompanied by significantly elevated crystallographic temperature factors. Combined with previous evidence in the literature, the structural analysis supports the critical role of electrostatics of the alpha5 helix dipole and overall conformational variability during nucleotide release.

  10. Department of Energy Labor Relations and Standards

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2014-02-06

    The change would be to remove Chapter I, Labor Relations, and Chapter II Labor Standards from DOE O 350.1 and develop DOE O DOE O 350.3, which will cancel and supersede Chapters I and II in DOE O 350.1. Content of the two chapters will be updated to reflect the Secretarial determination transferring functions for contractor labor relations and labor standards from the Office of Legacy Management to the Office of General Counsel. CRDs for those chapters will also be removed.

  11. Labor Standards Interview Form | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    SF 1445.pdf More Documents & Publications Davis Bacon Frequently Asked Questions (FAQs) TAP Webinar: Davis-Bacon Act Compliance Labor StandardsWage and Hour Laws...

  12. Management and Program Analyst (Supplemental Labor)

    Broader source: Energy.gov [DOE]

    This position is located in the Supplemental Labor Management Office (NSP), Supply Chain Services (NS), Chief Administrative Office (N), Bonneville Power Administration (BPA). The Supplemental...

  13. Utah Labor Commission | Open Energy Information

    Open Energy Info (EERE)

    The Utah Labor Commission is the regulatory agency responsible for preserving the balance established by the legislature for protecting the health, safety, and economic...

  14. Labor Compliance Advisor | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The DOE LCA, the Assistant General Counsel for Labor and Pension Law, is a career civil ... The proposed Federal Acquisition Regulation rule implements the EO requirements to: ...

  15. Structure of the protein core of translation initiation factor 2 in apo, GTP-bound and GDP-bound forms

    SciTech Connect (OSTI)

    Simonetti, Angelita; Fabbretti, Attilio; Hazemann, Isabelle; Jenner, Lasse; Gualerzi, Claudio O.; Klaholz, Bruno P.

    2013-06-01

    The crystal structures of the eubacterial translation initiation factor 2 in apo form and with bound GDP and GTP reveal conformational changes upon nucleotide binding and hydrolysis, notably of the catalytically important histidine in the switch II region. Translation initiation factor 2 (IF2) is involved in the early steps of bacterial protein synthesis. It promotes the stabilization of the initiator tRNA on the 30S initiation complex (IC) and triggers GTP hydrolysis upon ribosomal subunit joining. While the structure of an archaeal homologue (a/eIF5B) is known, there are significant sequence and functional differences in eubacterial IF2, while the trimeric eukaryotic IF2 is completely unrelated. Here, the crystal structure of the apo IF2 protein core from Thermus thermophilus has been determined by MAD phasing and the structures of GTP and GDP complexes were also obtained. The IF2GTP complex was trapped by soaking with GTP in the cryoprotectant. The structures revealed conformational changes of the protein upon nucleotide binding, in particular in the P-loop region, which extend to the functionally relevant switch II region. The latter carries a catalytically important and conserved histidine residue which is observed in different conformations in the GTP and GDP complexes. Overall, this work provides the first crystal structure of a eubacterial IF2 and suggests that activation of GTP hydrolysis may occur by a conformational repositioning of the histidine residue.

  16. Force sensor

    DOE Patents [OSTI]

    Grahn, A.R.

    1993-05-11

    A force sensor and related method for determining force components is described. The force sensor includes a deformable medium having a contact surface against which a force can be applied, a signal generator for generating signals that travel through the deformable medium to the contact surface, a signal receptor for receiving the signal reflected from the contact surface, a generation controller, a reception controller, and a force determination apparatus. The signal generator has one or more signal generation regions for generating the signals. The generation controller selects and activates the signal generation regions. The signal receptor has one or more signal reception regions for receiving signals and for generating detections signals in response thereto. The reception controller selects signal reception regions and detects the detection signals. The force determination apparatus measures signal transit time by timing activation and detection and, optionally, determines force components for selected cross-field intersections. The timer which times by activation and detection can be any means for measuring signal transit time. A cross-field intersection is defined by the overlap of a signal generation region and a signal reception region.

  17. Force sensor

    DOE Patents [OSTI]

    Grahn, Allen R.

    1993-01-01

    A force sensor and related method for determining force components. The force sensor includes a deformable medium having a contact surface against which a force can be applied, a signal generator for generating signals that travel through the deformable medium to the contact surface, a signal receptor for receiving the signal reflected from the contact surface, a generation controller, a reception controller, and a force determination apparatus. The signal generator has one or more signal generation regions for generating the signals. The generation controller selects and activates the signal generation regions. The signal receptor has one or more signal reception regions for receiving signals and for generating detections signals in response thereto. The reception controller selects signal reception regions and detects the detection signals. The force determination apparatus measures signal transit time by timing activation and detection and, optionally, determines force components for selected cross-field intersections. The timer which times by activation and detection can be any means for measuring signal transit time. A cross-field intersection is defined by the overlap of a signal generation region and a signal reception region.

  18. Protective Force

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2005-08-26

    Establishes requirements for management and operation of the DOE Protective Force (PF), establishes requirements for firearms operations and defines the firearms courses of fire. Cancels: DOE M 473.2-1A DOE M 473.2-2

  19. Protective Force

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2006-03-07

    The manual establishes requirements for management and operation of the DOE Protective Force, establishes requirements for firearms operations and defines the firearms courses of fire. Chg 1 dated 3/7/06. DOE M 470.4-3A cancels DOE M 470.4-3, Chg 1, Protective Force, dated 3-7-06, Attachment 2, Contractor Requirement Document (CRD) only (except for Section C). Chg 1, dated 3-7-06, cancels DOE M 470.4-3

  20. X-ray, NMR, and Mutational Studies of the Catalytic Cycle of the GDP-Mannose Mannosyl Hydrolase Reaction

    SciTech Connect (OSTI)

    Gabelli,S.; Azurmendi, H.; Bianchet, M.; Amzel, L.; Mildva, A.

    2006-01-01

    GDP-mannose hydrolase catalyzes the hydrolysis with inversion of GDP-{alpha}-D-hexose to GDP and {beta}-D-hexose by nucleophilic substitution by water at C1 of the sugar. Two new crystal structures (free enzyme and enzyme-substrate complex), NMR, and site-directed mutagenesis data, combined with the structure of the enzyme-product complex reported earlier, suggest a four-stage catalytic cycle. An important loop (L6, residues 119-125) contains a ligand to the essential Mg{sup 2+} (Gln-123), the catalytic base (His-124), and three anionic residues. This loop is not ordered in the X-ray structure of the free enzyme due to dynamic disorder, as indicated by the two-dimensional 1H-15N HMQC spectrum, which shows selective exchange broadening of the imidazole nitrogen resonances of His-124 (k{sub ex} = 6.6 x 10{sup 4} s{sup -1}). The structure of the enzyme-Mg{sup 2+}-GDP-mannose substrate complex of the less active Y103F mutant shows loop L6 in an open conformation, while the structure of the enzyme-Mg{sup 2+}-GDP product complex showed loop L6 in a closed, 'active' conformation. 1H-15N HMQC spectra show the imidazole N of His-124 to be unprotonated, appropriate for general base catalysis. Substituting Mg{sup 2+} with the more electrophilic metal ions Mn{sup 2+} or Co{sup 2+} decreases the pK{sub a} in the pH versus k{sub cat} rate profiles, showing that deprotonation of a metal-bound water is partially rate-limiting. The H124Q mutation, which decreases k{sub cat} 103.4-fold and largely abolishes its pH dependence, is rescued by the Y103F mutation, which increases k{sub cat} 23-fold and restores its pH dependence. The structural basis of the rescue is the fact that the Y103F mutation shifts the conformational equilibrium to the open form moving loop L6 out of the active site, thus permitting direct access of the specific base hydroxide from the solvent. In the proposed dissociative transition state, which occurs in the closed, active conformation of the enzyme, the

  1. Labor-Management Relations (LMR) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Labor-Management Relations (LMR) Labor-Management Relations (LMR) About LMR Department of Energy (DOE) Labor Management Relations (LMR), provides direction and oversight of the Departments labor-management relations programs and appraises the effectiveness of DOE labor-management relations throughout the Department. LMR provides guidance and advice to Labor Relations Officers (LROs), managers, and others and provides the statutory function of Agency Head Review (AHR) on collective bargaining,

  2. Interview: LaborWorks@NeighborWorks Provides Vermont Contractors...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Interview: LaborWorks@NeighborWorks Provides Vermont Contractors With Help When They Need It Interview: LaborWorks@NeighborWorks Provides Vermont Contractors With Help When They ...

  3. HQ Employee/Labor Management Relations Division (HC-33) | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EmployeeLabor Management Relations Division (HC-33) HQ EmployeeLabor Management Relations Division (HC-33) Functions Provide laboremployee management relations advisory services ...

  4. POLICY GUIDANCE MEMORANDUM #08 DOE Fair Labor Standards Act ...

    Office of Environmental Management (EM)

    8 DOE Fair Labor Standards Act (FLSA) ExemptNon-Exempt Status Determination POLICY GUIDANCE MEMORANDUM 08 DOE Fair Labor Standards Act (FLSA) ExemptNon-Exempt Status ...

  5. Assessing the Labor-Management Relationship

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the Labor-Management Relationship This report contains results and analysis of a survey that was issued to labor-management relations (LMR) personnel among all organizations/unions at the U.S. Department of Energy during August 2013. The goal of the survey is to assess the overall perceived effectiveness of LMR programs and to find potential target areas for improvement. The survey is comprised of 19 questions. Of these, 12 are subjective with the multiple choice answers: Strongly Agree, Agree,

  6. DOE/Labor Leadership Roundtable Meeting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE/Labor Leadership Roundtable Meeting DOE/Labor Leadership Roundtable Meeting Meeting Date: June 27, 2014 Documents Available for Download Meeting Agenda (140.52 KB) More Documents & Publications DOE/Labor Leadership Roundtable Meeting DOE/Labor Leadership Roundtable Meeting DOE Roundtable Meeting with Union Leaders

  7. Lift Forces

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lift Forces in Bubbly Flows Thomas Daly ∗ , Sreekanth Pannala † , Arthur Ruggles ∗ ∗ Department of Nuclear Engineering, University of Tennessee, 315 Pasqua Engineering Building, Knoxville, TN, 37996-2300 † Oak Ridge National Laboratory, P.O. Box 2008, Bldg. 5700, MS 6164 Oak Ridge, TN 37831-6164 tdaly1@utk.edu, pannalas@ornl.gov, aruggles@utk.edu INTRODUCTION Multiphase flows are found in a variety of engineering systems, two of the most notable categories being energy pro- duction and

  8. The Structure of the MUR1 GDP-mannose 4,67-deydratase from A. thaliana: Implications for Ligand Binding Specificity

    SciTech Connect (OSTI)

    Mulichak, A.M.; Bonin, C.P.; Reiter, W.-D.; Garavito, R.M.

    2010-03-08

    GDP-D-mannose 4,6-dehydratase catalyzes the first step in the de novo synthesis of GDP-L-fucose, the activated form of L-fucose, which is a component of glycoconjugates in plants known to be important to the development and strength of stem tissues. We have determined the three-dimensional structure of the MUR1 dehydratase isoform from Arabidopsis thaliana complexed with its NADPH cofactor as well as with the ligands GDP and GDP-D-rhamnose. MUR1 is a member of the nucleoside-diphosphosugar modifying subclass of the short-chain dehydrogenase/reductase enzyme family, having homologous structures and a conserved catalytic triad of Lys, Tyr, and Ser/Thr residues. MUR1 is the first member of this subfamily to be observed as a tetramer, the interface of which reveals a close and intimate overlap of neighboring NADP{sup +}-binding sites. The GDP moiety of the substrate also binds in an unusual syn conformation. The protein-ligand interactions around the hexose moiety of the substrate support the importance of the conserved triad residues and an additional Glu side chain serving as a general base for catalysis. Phe and Arg side chains close to the hexose ring may serve to confer substrate specificity at the O2 position. In the MUR1/GDP-D-rhamnose complex, a single unique monomer within the protein tetramer that has an unoccupied substrate site highlights the conformational changes that accompany substrate binding and may suggest the existence of negative cooperativity in MUR1 function.

  9. Novel protein and Mg[superscript 2+] configurations in the Mg[superscript 2+] GDP Complex of the SRP GTPase ffh

    SciTech Connect (OSTI)

    Focia, Pamela J.; Alam, Hena; Lu, Thanh; Ramirez, Ursula D.; Freymann, Douglas M.

    2010-03-05

    Ffh is the signal sequence recognition and targeting subunit of the prokaryotic signal recognition particle (SRP). Previous structural studies of the NG GTPase domain of Ffh demonstrated magnesium-dependent and magnesium-independent binding conformations for GDP and GMPPNP that are believed to reflect novel mechanisms for exchange and activation in this member of the GTPase superfamily. The current study of the NG GTPase bound to Mg{sup 2+} GDP reveals two new binding conformations - in the first the magnesium interactions are similar to those seen previously, however, the protein undergoes a conformational change that brings a conserved aspartate into its second coordination sphere. In the second, the protein conformation is similar to that seen previously, but the magnesium coordination sphere is disrupted so that only five oxygen ligands are present. The loss of the coordinating water molecule, at the position that would be occupied by the oxygen of the {gamma}-phosphate of GTP, is consistent with that position being privileged for exchange during phosphate release. The available structures of the GDP-bound protein provide a series of structural snapshots that illuminate steps along the pathway of GDP release following GTP hydrolysis.

  10. Labor Relations Building | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Labor Compliance Advisor Labor Compliance Advisor Executive Order 13673 Executive Order 13673 Read more Labor Standards/Wage and Hour Laws Labor Standards/Wage and Hour Laws Establishes minimum wage, overtime pay, and recordkeeping requirements. Read more Equal Employment Opportunity/Workforce Restructuring Laws Equal Employment Opportunity/Workforce Restructuring Laws Prohibits discrimination against individuals on the basis of various protected categories including race, sex, age, disability,

  11. Structural Studies of the Nudix GDP-mannose Hydrolase from E. coli Reveals a New Motif for Mannose Recognition

    SciTech Connect (OSTI)

    A Boto; W Xu; J Jakoncic; A Pannuri; T Romeo; M Bessman; S Gabelli; L Amzel

    2011-12-31

    The Nudix hydrolase superfamily, characterized by the presence of the signature sequence GX5EX7REUXEEXGU (where U is I, L, or V), is a well-studied family in which relations have been established between primary sequence and substrate specificity for many members. For example, enzymes that hydrolyze the diphosphate linkage of ADP-ribose are characterized by having a proline 15 amino acids C-terminal of the Nudix signature sequence. GDPMK is a Nudix enzyme that conserves this characteristic proline but uses GDP-mannose as the preferred substrate. By investigating the structure of the GDPMK alone, bound to magnesium, and bound to substrate, the structural basis for this divergent substrate specificity and a new rule was identified by which ADP-ribose pyrophosphatases can be distinguished from purine-DP-mannose pyrophosphatases from primary sequence alone. Kinetic and mutagenesis studies showed that GDPMK hydrolysis does not rely on a single glutamate as the catalytic base. Instead, catalysis is dependent on residues that coordinate the magnesium ions and residues that position the substrate properly for catalysis. GDPMK was thought to play a role in biofilm formation because of its upregulation in response to RcsC signaling; however, GDPMK knockout strains show no defect in their capacity of forming biofilms.

  12. Labor Standards/Wage and Hour Laws | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Standards/Wage and Hour Laws Labor Standards/Wage and Hour Laws Labor Standards and Wage/Hour laws establish minimum wage, overtime pay, recordkeeping, and minimum leave requirements: 40 U.S.C. chapter 31, subchapter IV, (Davis-Bacon Act) 41 U.S.C. chapter 67, (Service Contract Act) Fair Labor Standards Act Family and Medical Leave Act Migrant and Seasonal Agricultural Worker Protection Act DOE training on some of these laws are available below: Labor Standards 101 (1.76 MB) Davis-Bacon Act

  13. Acquisition Guide Chapter 22.1 Labor Standards

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Chapter 22.1 (September 2012) 1 Labor Standards for Construction and Services Guiding Principles The complexity of the Department's construction program requires a high degree ...

  14. Notification of Employee Rights under the National Labor Relations Act

    Broader source: Energy.gov [DOE]

    This Flash forwards a draft Federal Acquisition Regulation (FAR) clause, 52.222-40, Notification of Employee Rights under the National Labor Relations Act. Executive Order (EO) 13496, Notification of Employee Rights under Federal Labor Laws, dated January 30,2009, requires contractors and subcontractors to post a notice that informs employees of their rights under Federal labor laws, including the National Labor Relations Act. This Act encourages collective bargaining and protects the exercise by workers of their freedom to associate, to self organize and to designate representatives of their own choosing for the purpose of negotiating the terms and conditions of their employment.

  15. GDP-L-fucose: {beta}-D-galactoside 2-{alpha}-Lfucosyltransferases, DNA sequences encoding the same, method for producing the same and a method of genotyping a person

    DOE Patents [OSTI]

    Lowe, J.B.; Lennon, G.; Rouquier, S.; Giorgi, D.; Kelly, R.J.

    1998-09-15

    The gene encoding GDP-L-fucose: {beta}-D-Galactoside 2-{alpha}-Lfucosyltransferase has been cloned, and a mutation in this gene has been found to be responsible for an individual being a non-secretor. 30 figs.

  16. GDP-L-fucose: .beta.-D-galactoside 2-.alpha.-L-fucosyltransferases, DNA sequences encoding the same, method for producing the same and a method of genotyping a person

    DOE Patents [OSTI]

    Lowe, John B.; Lennon, Gregory; Rouquier, Sylvie; Giorgi, Dominique; Kelly, Robert J.

    1998-01-01

    The gene encoding GDP-L-fucose: .beta.-D-Galactoside 2-.alpha.-L-fucosyltransferase has been cloned, and a mutation in this gene has been found to be responsible for an individual being a non-secretor.

  17. Effect of increases in energy-related labor forces upon retailing in Alabama

    SciTech Connect (OSTI)

    Robicheaux, R.A.

    1983-06-01

    The heightened mining employment that will result from increased extraction of coal from Alabama's Warrior Coal Basin will boost retail sales and employment. The Warrior Coal Basin counties (Fayette, Jefferson, Tuscaloosa and Walker) are heavily dependent upon coal mining as a source of employment and wages. Further, since the counties' economies grew increasingly dependent upon coal mining activities throughout the 1970s, it was believed that it would be possible to measure, with some acceptable level of reliability, the impact of the steadily rising mining activity upon the area's retailing sector. Therefore, a small scale econometric model was developed which represents the interrelationships among income, mining and trade employment and retail sales in the four-county Warrior Coal Basin area. The results of two versions of the model are presented. In the first version, area-wide retail sales are treated in the aggregate. In the second version, retail sales are disaggregated into twelve categories (e.g., food, apparel, furniture, etc.). The models were specified using 1960 to 1976 data. The mining employment growth scenario used in this report called for steady increases in mining employment that culminated in an employment level that is 4000 above the baseline employment projections by 1985. Both versions of the model predicted that cumulative real regional income would increase by $1.39 billion over seven years with the added mining employment. The predicted impacts on trade employment and real retail sales varied between the two models, however. The aggregate model predicts the addition of 7500 trade workers and an additional $1.35 billion in real retail sales. The disaggregate model suggests that food stores, automobile dealers, general merchandise stores, gas stations and lumber and building materials retailers would enjoy the greatest positive benefits.

  18. Labor Standards Compliance, Contractor Labor Relations, and Contractor Workforce Restructuring Programs

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2014-09-29

    To ensure that contractors pursue collective bargaining practices that promote efficiency and economy in contract operations, judicious expenditure of public funds, equitable resolution of disputes, and effective collective bargaining relationships; that contractor relations/human resources specialists achieve consultations with management and operating contractors; and that appropriate labor standards are included in DOE/NNSA contracts and subcontracts. Cancels Chapters I-III of DOE O 350.1 Chg 4. Does not cancel other directives.

  19. Protective Force Program Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-06-30

    Provides detailed requirements to supplement DOE O 473.2, Protective Force Program, which establishes the requirements and responsibilities for management and operation of the Department of Energy (DOE) Protective Force (PF) Program. Does not cancel other directives.

  20. Administering Work Force Discipline

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-05-14

    The order provides requirements and responsibilities for administering work force discipline and corrective actions. Supersedes DOE O 3750.1.

  1. Fluid force transducer

    DOE Patents [OSTI]

    Jendrzejczyk, Joseph A.

    1982-01-01

    An electrical fluid force transducer for measuring the magnitude and direction of fluid forces caused by lateral fluid flow, includes a movable sleeve which is deflectable in response to the movement of fluid, and a rod fixed to the sleeve to translate forces applied to the sleeve to strain gauges attached to the rod, the strain gauges being connected in a bridge circuit arrangement enabling generation of a signal output indicative of the magnitude and direction of the force applied to the sleeve.

  2. The R6A-1 peptide binds to switch II of G{alpha}{sub i1} but is not a GDP-dissociation inhibitor

    SciTech Connect (OSTI)

    Willard, Francis S. . E-mail: fwillard@med.unc.edu; Siderovski, David P.

    2006-01-27

    Heterotrimeric G-proteins are molecular switches that convert signals from membrane receptors into changes in intracellular physiology. Recently, several peptides that bind heterotrimeric G-protein {alpha} subunits have been isolated including the novel G{alpha}{sub i1} . GDP binding peptides R6A and KB-752. The R6A peptide and its minimized derivative R6A-1 interact with G{alpha}{sub i1} . GDP. Based on spectroscopic analysis of BODIPYFL-GTP{gamma}S binding to G{alpha}{sub i1}, it has been reported that R6A-1 has guanine nucleotide dissociation inhibitor (GDI) activity against G{alpha}{sub i1} [W.W. Ja, R.W. Roberts, Biochemistry 43 (28) (2004) 9265-9275]. Using radioligand binding, we show that R6A-1 is not a GDI for G{alpha}{sub i1} subunits. Furthermore, we demonstrate that R6A-1 reduces the fluorescence quantum yield of the G{alpha}{sub i1}-BODIPYFL-GTP{gamma}S complex, thus explaining the previously reported GDI activity as a fluorescence artifact. We further show that R6A-1 has significant sequence similarity to the guanine nucleotide exchange factor peptide KB-752 that binds to switch II of G{alpha}{sub i1}. We use competitive binding analysis to show that R6A-1 also binds to switch II of G{alpha} subunits.

  3. UNITED STATES OF AMERICA BEFORE THE FEDERAL LABOR RELATIONS AUTHORITY

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    "" SEP-20-2007 08:33 FLRR -SFRO P.01/01 " UNITED STATES OF AMERICA BEFORE THE FEDERAL LABOR RELATIONS AUTHORITY U,S:DEPARTMENf OF ENERGY RICHLAND OPERA nONS OFFICE RICHLAND) W ASHlNGTON -Activity CASE NO. SF-RP-90080 -and- ..NAllONAL FEDERATION OF FEDERAL EMPLOYEES, LOCAL 181 -Petitioner/Exclusive Represen~tive -and- AMERICAN FEDERATION OF GOVERNMENT EMPLOYEES, AFL.CIO -Labor Organization AMENDMENT OF CERTIFICATION Pursuant to Section 2422.1 ofllie Regulations of the Federal Labor

  4. Coulomb force as an entropic force

    SciTech Connect (OSTI)

    Wang Tower

    2010-05-15

    Motivated by Verlinde's theory of entropic gravity, we give a tentative explanation to the Coulomb's law with an entropic force. When trying to do this, we find the equipartition rule should be extended to charges and the concept of temperature should be reinterpreted. If one accepts the holographic principle as well as our generalizations and reinterpretations, then Coulomb's law, the Poisson equation, and the Maxwell equations can be derived smoothly. Our attempt can be regarded as a new way to unify the electromagnetic force with gravity, from the entropic origin. Possibly some of our postulates are related to the D-brane picture of black hole thermodynamics.

  5. Y-12 Administration and Labor Relations building | Y-12 National Security

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Complex Administration and ... Y-12 Administration and Labor Relations building Employees leave the Y-12 Administration and Labor Relations building. Has anything changed much?

  6. Active Labor Unions Interfacing with DOE – June 2014

    Broader source: Energy.gov [DOE]

    This information book provides an overview of what has been learned through the interface with representative labor unions and related stakeholders as well as accomplishments and current efforts to address any identified areas of concern.

  7. Labor Department Offers $500 Million for Clean Energy Job Training

    Office of Energy Efficiency and Renewable Energy (EERE)

    The U.S. Department of Labor recently launched five grant competitions, totaling $500 million, to fund projects that prepare workers for green jobs in the energy efficiency and renewable energy industries.

  8. Labor Standards for DOE Management and Operating Contracts

    Office of Energy Efficiency and Renewable Energy (EERE)

    This Flash is issued to provide you an Acquisition Letter containing information and guidance regarding application of labor standards at the Department of Energy (DOE) and National Nuclear Security Administration (NNSA) management and operating (M&O) contract facilities.

  9. Labor and energy impacts of energy-conservation measures

    SciTech Connect (OSTI)

    Not Available

    1980-01-01

    Three papers are presented discussing the labor and energy impacts of energy-conservation measures, namely: Generation of the Industry/Occupation Wage Matrix and Related Matters, by Carole Green; Job Shifts from Energy Conservation (Salary Distribution Effects), by Robert A. Herendeen; and Energy and Labor Implication of Improving Thermal Integrity of New Houses, by John Joseph Nangle. A separate abstract was prepared for each paper.

  10. Hill Air Force Base

    Broader source: Energy.gov [DOE]

    Energy savings performance contracting at Hill Air Force Base generated much interest during a recent training session on energy management that downlinked 12 Department of Defense sites. Energy...

  11. China's Pathways to Achieving 40% ~ 45% Reduction in CO{sub 2} Emissions per Unit of GDP in 2020: Sectoral Outlook and Assessment of Savings Potential

    SciTech Connect (OSTI)

    Zheng, Nina; Fridley, David; Zhou, Nan; Levine, Mark; Price, Lynn; Ke, Jing

    2011-09-30

    Achieving China’s goal of reducing its carbon intensity (CO{sub 2} per unit of GDP) by 40% to 45% percent below 2005 levels by 2020 will require the strengthening and expansion of energy efficiency policies across the buildings, industries and transport sectors. This study uses a bottom-up, end-use model and two scenarios -- an enhanced energy efficiency (E3) scenario and an alternative maximum technically feasible energy efficiency improvement (Max Tech) scenario – to evaluate what policies and technical improvements are needed to achieve the 2020 carbon intensity reduction target. The findings from this study show that a determined approach by China can lead to the achievement of its 2020 goal. In particular, with full success in deepening its energy efficiency policies and programs but following the same general approach used during the 11th Five Year Plan, it is possible to achieve 49% reduction in CO{sub 2} emissions per unit of GDP (CO{sub 2} emissions intensity) in 2020 from 2005 levels (E3 case). Under the more optimistic but feasible assumptions of development and penetration of advanced energy efficiency technology (Max Tech case), China could achieve a 56% reduction in CO{sub 2} emissions intensity in 2020 relative to 2005 with cumulative reduction of energy use by 2700 Mtce and of CO{sub 2} emissions of 8107 Mt CO{sub 2} between 2010 and 2020. Energy savings and CO{sub 2} mitigation potential varies by sector but most of the energy savings potential is found in energy-intensive industry. At the same time, electricity savings and the associated emissions reduction are magnified by increasing renewable generation and improving coal generation efficiency, underscoring the dual importance of end-use efficiency improvements and power sector decarbonization.

  12. Protective Force Program Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-12-20

    Provides detailed requirements to supplement DOE O 473.2, PROTECTIVE FORCE PROGRAM, which establishes the requirements and responsibilities for management and operation of the Department of Energy (DOE) Protective Force (PF) Program. Change 1 revised pages in Chapters IV and VI on 12/20/2001.

  13. POLICY GUIDANCE MEMORANDUM #08 DOE Fair Labor Standards Act (FLSA) Exempt/Non-Exempt Status Determination

    Broader source: Energy.gov [DOE]

    This memorandum provides guidance on determining an employee's Fair Labor Standards Act status within the Department.

  14. OOTW Force Design Tools

    SciTech Connect (OSTI)

    Bell, R.E.; Hartley, D.S.III; Packard, S.L.

    1999-05-01

    This report documents refined requirements for tools to aid the process of force design in Operations Other Than War (OOTWs). It recommends actions for the creation of one tool and work on other tools relating to mission planning. It also identifies the governmental agencies and commands with interests in each tool, from whom should come the user advisory groups overseeing the respective tool development activities. The understanding of OOTWs and their analytical support requirements has matured to the point where action can be taken in three areas: force design, collaborative analysis, and impact analysis. While the nature of the action and the length of time before complete results can be expected depends on the area, in each case the action should begin immediately. Force design for OOTWs is not a technically difficult process. Like force design for combat operations, it is a process of matching the capabilities of forces against the specified and implied tasks of the operation, considering the constraints of logistics, transport and force availabilities. However, there is a critical difference that restricts the usefulness of combat force design tools for OOTWs: the combat tools are built to infer non-combat capability requirements from combat capability requirements and cannot reverse the direction of the inference, as is required for OOTWs. Recently, OOTWs have played a larger role in force assessment, system effectiveness and tradeoff analysis, and concept and doctrine development and analysis. In the first Quadrennial Defense Review (QDR), each of the Services created its own OOTW force design tool. Unfortunately, the tools address different parts of the problem and do not coordinate the use of competing capabilities. These tools satisfied the immediate requirements of the QDR, but do not provide a long-term cost-effective solution.

  15. Reduction-in-Force

    Broader source: Energy.gov [DOE]

    Reduction in force (RIF) is a set of regulations and procedures that are used to determine whether an employee keeps his or her present position, or whether the employee has a right to another...

  16. Protective Force Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1995-02-13

    To prescribe Department of Energy policy, responsibilities, and requirements for the management and operation of the Protective Force Program. Chg 1 dated 2-13-95. Cancels DOE O 5632.7 and DOE O 5632.8.

  17. Three-body forces

    SciTech Connect (OSTI)

    Nefkens, B.M.K.

    1986-10-15

    A review of current knowledge of three-body forces from experimental and theoretical standpoints is given. The 3-H and 3-He nuclei are discussed. Also, nucleon scattering from deuterium is discussed. (AIP)

  18. Federal Protective Force

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-07-15

    This Manual establishes requirements for the management and operation of the Department of Energy (DOE) Federal protective forces (FPFs). Cancels DOE M 470.4-3, Chg 1. Canceled by DOE O 473.3.

  19. Project Labor Agreements- Federal Acquisition Circular 2005-41

    Broader source: Energy.gov [DOE]

    A final rule was published in the Federal Register at 75 Fed. Reg. 19168 on April 13,201 0 implementing Executive Order 13502, which encourages agencies to consider using Project Labor Agreements on Federal construction projects at least $25,000,000 in total cost. A summary is attached for your information.

  20. Work Force Restructuring Activities

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Work Force Restructuring Activities December 10, 2008 Note: Current updates are in bold # Planned Site/Contractor HQ Approved Separations Status General * LM has finalized the compilation of contractor management team separation data for the end of FY07 actuals and end of FY08 and FY09 projections. LM has submitted to Congress the FY 2007 Annual Report on contractor work force restructuring activities. The report has been posted to the LM website. *LM conducted a DOE complex-wide data call to

  1. Work Force Discipline

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1983-03-23

    The order provides guidance and procedures and states responsibilities for maintaining work force discipline in DOE. Chg 1, dated 3-11-85; Chg 2, dated 1-6-86; Chg 3, dated 3-21-89; Chg 4, dated 8-2-90; Chg 5, dated 3-9-92; Chg 6, dated 8-21-92, cancels Chg 5.

  2. Protective Force Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-06-30

    Establishes policy, requirements, responsibilities, and authorities, for the management and operation of the Department of Energy (DOE) Protective Force (PF) Program. Extended until 7-7-06 by DOE N 251.64, dated 7-7-05 Cancels: DOE 5632.7A

  3. Direct Aerosol Forcing Uncertainty

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Mccomiskey, Allison

    2008-01-15

    Understanding sources of uncertainty in aerosol direct radiative forcing (DRF), the difference in a given radiative flux component with and without aerosol, is essential to quantifying changes in Earth's radiation budget. We examine the uncertainty in DRF due to measurement uncertainty in the quantities on which it depends: aerosol optical depth, single scattering albedo, asymmetry parameter, solar geometry, and surface albedo. Direct radiative forcing at the top of the atmosphere and at the surface as well as sensitivities, the changes in DRF in response to unit changes in individual aerosol or surface properties, are calculated at three locations representing distinct aerosol types and radiative environments. The uncertainty in DRF associated with a given property is computed as the product of the sensitivity and typical measurement uncertainty in the respective aerosol or surface property. Sensitivity and uncertainty values permit estimation of total uncertainty in calculated DRF and identification of properties that most limit accuracy in estimating forcing. Total uncertainties in modeled local diurnally averaged forcing range from 0.2 to 1.3 W m-2 (42 to 20%) depending on location (from tropical to polar sites), solar zenith angle, surface reflectance, aerosol type, and aerosol optical depth. The largest contributor to total uncertainty in DRF is usually single scattering albedo; however decreasing measurement uncertainties for any property would increase accuracy in DRF. Comparison of two radiative transfer models suggests the contribution of modeling error is small compared to the total uncertainty although comparable to uncertainty arising from some individual properties.

  4. Contractor Protective Force

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-11-05

    This Manual establishes requirements for the management and operation of the U.S. Department of Energy contractor protective forces. Cancels: DOE M 470.4-3 Chg 1, CRD (Attachment 2) only, except for Section C. Canceled by DOE O 473.3.

  5. DOE Labor Relations Training and Information Session, November 3-4, 2015

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Training Materials | Department of Energy Labor Relations Training and Information Session, November 3-4, 2015 Training Materials DOE Labor Relations Training and Information Session, November 3-4, 2015 Training Materials The Department of Energy held the First Annual DOE Labor Relations Training and Information Session on November 3-4, 2015. The training was held in Washington, DC and was designed for DOE site Human Resources personnel, representatives of DOE's contractor labor unions and

  6. Force Modulator System

    SciTech Connect (OSTI)

    Redmond Clark

    2009-04-30

    Many metal parts manufacturers use large metal presses to shape sheet metal into finished products like car body parts, jet wing and fuselage surfaces, etc. These metal presses take sheet metal and - with enormous force - reshape the metal into a fully formed part in a manner of seconds. Although highly efficient, the forces involved in forming metal parts also damage the press itself, limit the metals used in part production, slow press operations and, when not properly controlled, cause the manufacture of large volumes of defective metal parts. To date, the metal-forming industry has not been able to develop a metal-holding technology that allows full control of press forces during the part forming process. This is of particular importance in the automotive lightweighting efforts under way in the US automotive manufacturing marketplace. Metalforming Controls Technology Inc. (MC2) has developed a patented press control system called the Force Modulator that has the ability to control these press forces, allowing a breakthrough in stamping process control. The technology includes a series of hydraulic cylinders that provide controlled tonnage at all points in the forming process. At the same time, the unique cylinder design allows for the generation of very high levels of clamping forces (very high tonnages) in very small spaces; a requirement for forming medium and large panels out of HSS and AHSS. Successful production application of these systems testing at multiple stamping operations - including Ford and Chrysler - has validated the capabilities and economic benefits of the system. Although this technology has been adopted in a number of stamping operations, one of the primary barriers to faster adoption and application of this technology in HSS projects is system cost. The cost issue has surfaced because the systems currently in use are built for each individual die as a custom application, thus driving higher tooling costs. This project proposed to better

  7. TEXT Pro Force Training

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Basic Protective Force Training Program DOE/IG-0641 March 2004 * None of the 10 sites included instruction in rappelling even though it was part of the special response team core curriculum and continued to be offered by the Nonprolif- eration and National Security Institute; * Only one site conducted basic training on use of a shotgun, despite the fact that a num- ber of sites used the weapon for breaching exercises and other purposes; and, * Seven of the sites modified prescribed training

  8. ARMY SERVICE FORCES

    Office of Legacy Management (LM)

    ARMY SERVICE FORCES ' -, 1 MANHATTAN ENGINEER DISTRICT --t 4 IN "LPLI RC,' LR io EIDM CIS INTELLIGENCE AND SECURITY DIVISION CHICAGO BRANCH OFFICE i ., -,* - P. 0. Box 6770-A I ' 1 .' CHICAGO 80. ILLINOIS /lvb 15 February 1945 Subject: shipment Security Survey at &Uinckrodt Chemical Works. MEMORANDUM to the Officer in Charge. 1. The Mallinckrodt Chemical Works, St. Louis, Missouri, was contacted by the undersigned on 16 November 1944, for the purpose of -king an investigation to

  9. Sandia National Laboratories: Global Insight, Inc. / Department of Labor

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Facebook Twitter YouTube Flickr RSS Working with Sandia Global Insight, Inc. / Department of Labor Global Insight, Inc. (GII), was created by combining DRI (formerly Data Resources, Inc.) and WEFA (formerly Wharton Econometric Forecasting Associates). Due to copyright/distribution laws being derived from a proprietary service that Sandia pays for, Sandia can no longer provide GII factor information at this website. However, Sandia will continue to supply the DOL and the "combined key

  10. Labor-Management Roundtable Forrestal Building, Washington, DC

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Labor-Management Roundtable Forrestal Building, Washington, DC June 27, 2014 10:00 - 11:30 AM (EST) 7E-069 AGENDA Reciprocity Certification Presentation Plaque Presentation by Secretary of Energy Introductory Remarks Ernest J. Moniz, Secretary of Energy Roundtable Remarks/Discussion Union Leadership Closing Remarks Ernest J. Moniz, Secretary of Energy This meeting is about hearing the concerns of the Unions on Safety, Operations, and Communications. Representatives of DOE contractor employees

  11. Labor management positive change process (LMPCP) at Marissa Mine

    SciTech Connect (OSTI)

    Hird, T.; Becker, T.

    1997-12-01

    The authors discuss the {open_quotes}Labor Management Positive Change Process{close_quotes} (LMPCP) and the Marissa Mine. In the 1993 National Bituminous Coal Wage Agreement, there is a provision that allows for the establishment of the UMWA-BCOA labor management positive change process. This process provides the mechanism to deal with change. The major goal of this process is to increase job security, competitiveness, financial stability and opportunity for all employees covered by the agreement. The authors discuss the Marissa story concerning the LMPCP process. The process established some goals for the Marissa Mine. The main and most important goal was that the mine continue beyond the year 2000. They wanted to develop and implement a more cooperative working relationship; a relationship based on honesty, integrity, and mutual trust. They also wanted to utilize employees` responsibilities, skills, and ideas. They wanted to reinforce the shared belief that an ongoing partnership between labor and management is essential to the long-term success and growth of the industry. The results of some of the issues that were addressed include: employment has increased from 281 union employees to 332 employees; production increased from 3.1 million tons to 4.1 million tons; cost per ton was lowered over $5.00 per ton in the last two years; accidents have been reduced by 50 percent; the process has increased sales and helped develop new sales; and they have been able to improve attitudes among employees.

  12. Labor, nationalism, and imperialism in eastern Arabia: Britain, the Shaikhs, and the Gulf oil workers in Bahrain, Kuwait and Qatar, 1932-1956

    SciTech Connect (OSTI)

    Saleh, H.M.A.

    1991-01-01

    This study examines the lack of a noticeable indigenous labor movement in the contemporary Gulf Arab countries of Bahrain, Kuwait and Qatar; it focuses on the emergence, after the discovery of oil, of an industrial Gulf labor force, and on the evolution of the British policy towards oil and Gulf oil workers. The period examined begins with the discovery of oil in Bahrain in 1932 (the first such discovery on the Arab side of the Gulf), and ends with the Suez Crisis of 1956. The latter is a watershed event in Gulf history. It is argued that the Suez Crisis was in large part responsible for the long-term defeat of the indigenous labor movement in the Gulf. Attention is given to the parts played by the British Government of India, the Foreign Office, the local Shaikhs, the Gulf nationalists, and by the workers themselves. Policies towards workers passed through two different periods. In the first, 1932-1945, the Government of India had no direct interest in the Gulf labor situation; in the second, 1946-1956, the Foreign Office took increased interest in the welfare of local oil workers, primarily because of the importance of oil to reconstruction of the British economy after the war. However, the Suez Crisis in 1956 convinced the British to withdraw their support for the workers.

  13. NEW - DOE O 350.3, Labor Standards Compliance, Contractor Labor Relations, and Contractor Workforce Restructuring Programs

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    To ensure that contractors pursue collective bargaining practices that promote efficiency and economy in contract operations, judicious expenditure of public funds, equitable resolution of disputes, and effective collective bargaining relationships; that contractor relations/human resources specialists achieve consultations with management and operating contractors; and that appropriate labor standards are included in DOE/NNSA contracts and subcontracts. Cancels Chapters I-III of DOE O 350.1 Chg 4. Does not cancel other directives.

  14. Atomic Force Microscope

    SciTech Connect (OSTI)

    Day, R.D.; Russell, P.E.

    1988-12-01

    The Atomic Force Microscope (AFM) is a recently developed instrument that has achieved atomic resolution imaging of both conducting and non- conducting surfaces. Because the AFM is in the early stages of development, and because of the difficulty of building the instrument, it is currently in use in fewer than ten laboratories worldwide. It promises to be a valuable tool for obtaining information about engineering surfaces and aiding the .study of precision fabrication processes. This paper gives an overview of AFM technology and presents plans to build an instrument designed to look at engineering surfaces.

  15. Sector trends and driving forces of global energy use and greenhouse gas emissions: focus in industry and buildings

    SciTech Connect (OSTI)

    Price, Lynn; Worrell, Ernst; Khrushch, Marta

    1999-09-01

    Disaggregation of sectoral energy use and greenhouse gas emissions trends reveals striking differences between sectors and regions of the world. Understanding key driving forces in the energy end-use sectors provides insights for development of projections of future greenhouse gas emissions. This report examines global and regional historical trends in energy use and carbon emissions in the industrial, buildings, transport, and agriculture sectors, with a more detailed focus on industry and buildings. Activity and economic drivers as well as trends in energy and carbon intensity are evaluated. The authors show that macro-economic indicators, such as GDP, are insufficient for comprehending trends and driving forces at the sectoral level. These indicators need to be supplemented with sector-specific information for a more complete understanding of future energy use and greenhouse gas emissions.

  16. Miniature quartz resonator force transducer

    DOE Patents [OSTI]

    EerNisse, E.P.

    The invention relates to a piezoelectric quartz force transducer having the shape of a double-ended tuning fork.

  17. Miniature quartz resonator force transducer

    DOE Patents [OSTI]

    Eer Nisse, Errol P.

    1980-01-01

    The invention relates to a piezoelectric quartz force transducer having the shape of a double-ended tuning fork.

  18. Force-Field Parameter Fitter

    Energy Science and Technology Software Center (OSTI)

    2015-05-27

    ParFit is a flexible and extendable framework and library of classes for fitting force-field parameters to data from high-level ab-initio calculations on the basis of deterministic and stochastic algorithms. Currently, the code is fitting MM3 and Merck force-field parameters but could easily extend to other force-field types.

  19. Normal Force and Drag Force in Magnetorheological Finishing

    SciTech Connect (OSTI)

    Miao, C.; Shafrir, S.N.; Lambropoulos, J.C.; Jacobs, S.D.

    2010-01-13

    The material removal in magnetorheological finishing (MRF) is known to be controlled by shear stress, tau, which equals drag force, Fd, divided by spot area, As. However, it is unclear how the normal force, Fn, affects the material removal in MRF and how the measured ratio of drag force to normal force Fd/Fn, equivalent to coefficient of friction, is related to material removal. This work studies, for the first time for MRF, the normal force and the measured ratio Fd/Fn as a function of material mechanical properties. Experimental data were obtained by taking spots on a variety of materials including optical glasses and hard ceramics with a spot-taking machine (STM). Drag force and normal force were measured with a dual load cell. Drag force decreases linearly with increasing material hardness. In contrast, normal force increases with hardness for glasses, saturating at high hardness values for ceramics. Volumetric removal rate decreases with normal force across all materials. The measured ratio Fd/Fn shows a strong negative linear correlation with material hardness. Hard materials exhibit a low coefficient of friction. The volumetric removal rate increases with the measured ratio Fd/Fn which is also correlated with shear stress, indicating that the measured ratio Fd/Fn is a useful measure of material removal in MRF.

  20. HQ Employee/Labor Management Relations Division (HC-33) | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Employee/Labor Management Relations Division (HC-33) HQ Employee/Labor Management Relations Division (HC-33) Functions Provide labor/employee management relations advisory services to Headquarters staff, including union negotiations, adverse actions, grievances, and performance management; Represent management in third party situations or union negotiations; Provide work life information, referral and support services to Headquarters employees covering such areas as child care, elder

  1. Air Force Renewable Energy Programs

    Office of Energy Efficiency and Renewable Energy (EERE)

    Presentation covers Air Force Renewable Energy Programs and is given at the Spring 2011 Federal Utility Partnership Working Group (FUPWG) meeting.

  2. Force As A Momentum Current

    SciTech Connect (OSTI)

    Munera, Hector A.

    2010-07-28

    Advantages of a neo-Cartesian approach to classical mechanics are noted. If conservation of linear momentum is the fundamental principle, Newton's three laws become theorems. A minor paradox in static Newtonian mechanics is identified, and solved by reinterpreting force as a current of momentum. Contact force plays the role of a mere midwife in the exchange of momentum; however, force cannot be eliminated from physics because it provides the numerical value for momentum current. In this sense, in a neo-Cartesian formulation of mechanics the concept of force becomes strengthened rather than weakened.

  3. Continuous Forcing Data, Darwin, Australia

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Jakob, Christian

    2010-09-22

    Long term, large scale continuous forcing data set for three complete wet seasons (2004-2005, 2005-2006 and 2006-2007) in Darwin, Australia.

  4. Continuous Forcing Data, Darwin, Australia

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Jakob, Christian

    Long term, large scale continuous forcing data set for three complete wet seasons (2004-2005, 2005-2006 and 2006-2007) in Darwin, Australia.

  5. Army Energy Initiatives Task Force

    Broader source: Energy.gov [DOE]

    Presentation—given at the Fall 2011 Federal Utility Partnership Working Group (FUPWG) meeting—covers the Army Energy Initiatives Task Force.

  6. Sensing mode atomic force microscope

    DOE Patents [OSTI]

    Hough, Paul V. C.; Wang, Chengpu

    2006-08-22

    An atomic force microscope is described having a cantilever comprising a base and a probe tip on an end opposite the base; a cantilever drive device connected to the base; a magnetic material coupled to the probe tip, such that when an incrementally increasing magnetic field is applied to the magnetic material an incrementally increasing force will be applied to the probe tip; a moveable specimen base; and a controller constructed to obtain a profile height of a specimen at a point based upon a contact between the probe tip and a specimen, and measure an adhesion force between the probe tip and the specimen by, under control of a program, incrementally increasing an amount of a magnetic field until a release force, sufficient to break the contact, is applied. An imaging method for atomic force microscopy involving measuring a specimen profile height and adhesion force at multiple points within an area and concurrently displaying the profile and adhesion force for each of the points is also described. A microscope controller is also described and is constructed to, for a group of points, calculate a specimen height at a point based upon a cantilever deflection, a cantilever base position and a specimen piezo position; calculate an adhesion force between a probe tip and a specimen at the point by causing an incrementally increasing force to be applied to the probe tip until the probe tip separates from a specimen; and move the probe tip to a new point in the group.

  7. Sensing mode atomic force microscope

    DOE Patents [OSTI]

    Hough, Paul V.; Wang, Chengpu

    2004-11-16

    An atomic force microscope is described having a cantilever comprising a base and a probe tip on an end opposite the base; a cantilever drive device connected to the base; a magnetic material coupled to the probe tip, such that when an incrementally increasing magnetic field is applied to the magnetic material an incrementally increasing force will be applied to the probe tip; a moveable specimen base; and a controller constructed to obtain a profile height of a specimen at a point based upon a contact between the probe tip and a specimen, and measure an adhesion force between the probe tip and the specimen by, under control of a program, incrementally increasing an amount of a magnetic field until a release force, sufficient to break the contact, is applied. An imaging method for atomic force microscopy involving measuring a specimen profile height and adhesion force at multiple points within an area and concurrently displaying the profile and adhesion force for each of the points is also described. A microscope controller is also described and is constructed to, for a group of points, calculate a specimen height at a point based upon a cantilever deflection, a cantilever base position and a specimen piezo position; calculate an adhesion force between a probe tip and a specimen at the point by causing an incrementally increasing force to be applied to the probe tip until the probe tip separates from a specimen; and move the probe tip to a new point in the group.

  8. Interview: LaborWorks@NeighborWorks Provides Vermont Contractors With Help

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    When They Need It | Department of Energy Interview: LaborWorks@NeighborWorks Provides Vermont Contractors With Help When They Need It Interview: LaborWorks@NeighborWorks Provides Vermont Contractors With Help When They Need It LaborWorks@NeighborWorks is a nonprofit temporary labor pool formed to assist professional contractors involved with the HEAT Squad during busy periods when they couldn't keep up with demand or hire full-time help. This interview provides background information about

  9. Memorandum of Understanding between the U.S. Department of Labor...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    This Memorandum of Understanding (MOU) serves to set forth the authorities, responsibilities, and procedures by which the Department of Labor (DOL) and the Department of Energy ...

  10. New Study Shows Solar Manufacturing Costs Not Driven Primarily by Labor

    Broader source: Energy.gov [DOE]

    Production scale, not lower labor costs, drives China's current advantage in manufacturing photovoltaic (PV) solar energy systems, according to a new report released today by the Energy Department...

  11. Fiscal Year 2013 Department of Energy Annual Occupational Safety and Health Report for Federal Employees to the Secretary of Labor

    Broader source: Energy.gov [DOE]

    Fiscal Year 2013 Department of Energy Annual Occupational Safety and Health Report for Federal Employees to the Secretary of Labor.

  12. The miners of Windber: Class, ethnicity, and the labor movements in a Pennsylvania coal town, 1890s-1930s

    SciTech Connect (OSTI)

    Beik, M.A.

    1989-01-01

    Immigrant miners, the subject of this community study lived, worked, and struggled in an important bituminous coal town located in central Pennsylvania. Windber, a transposition of Berwind, was founded as a company town in 1897 by the Berwind White Coal Mining Company, a leading coal corporation. Most of the labor force, 4,000 to 5,000 miners, were recent arrivals from southern and eastern Europe. At least 25 different nationalities were represented in the town's population of 10,000. The company established an autocratic type of control in the workplace and the community. It was opposed to unionization by the United Mine Workers and operated an open-shop until the New Deal. The broad struggle of the miners and their families to end this autocratic control and by that get greater control over their lives and work in the nonunion period is the raison d'etre of this study. Sources used include oral histories, census, union files, church records, Slovak fraternal society papers, borough council records, organizers' papers, company employment records, printed documents, and rare newspaper collections. Part One is devoted to a social history of work and community. Topics covered include the company's labor, ethnic, and governing policies; the nature and composition of the social structure; the organization of work; the importance of the family economy; the functioning of immigrant communities within the larger American setting; and the competition for ethnic community leadership. The most important theme concerns the relationship of ethnic city to class formation and working class struggles. Windber's historic example shows that ethnic communities were not homogeneous entities but arenas of class conflict. Part Two is narrative presentation of the major struggle in which Windber mine participated.

  13. WEDNESDAY: Energy Secretary Chu and Labor Secretary Solis to Discuss Clean

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Jobs in Nevada | Department of Energy Chu and Labor Secretary Solis to Discuss Clean Energy Jobs in Nevada WEDNESDAY: Energy Secretary Chu and Labor Secretary Solis to Discuss Clean Energy Jobs in Nevada June 21, 2011 - 12:00am Addthis Washington, D.C. - On Wednesday, June 22, 2011, U.S. Energy Secretary Steven Chu and U.S. Labor Secretary Hilda L. Solis will host a media conference call to discuss Nevada's progress in developing a clean and renewable energy economy. Secretary Chu

  14. Initial validation of FORCE2

    SciTech Connect (OSTI)

    Burge, S.W.

    1991-06-01

    Erosion has been identified as one of the significant design issues in fluid beds. A cooperative R&D venture of industry, research, and government organizations was recently formed to meet the industry need for a better understanding of erosion in fluid beds. Research focussed on bed hydrodynamics, which are considered to be the primary erosion mechanism. As part of this work, ANL developed an analytical model (FLUFIX) for bed hydrodynamics. Partial validation was performed using data from experiments sponsored by the research consortium. Development of a three-dimensional fluid bed hydrodynamic model was part of Asea-Babcock`s in-kind contribution to the R&D venture. This model, FORCE2, was developed by Babcock & Wilcox`s Research and Development Division existing B&W program and on the gas-solids modeling and was based on an existing B&W program and on the gas-solids modeling technology developed by ANL and others. FORCE2 contains many of the features needed to model plant size beds and, therefore can be used along with the erosion technology to assess metal wastage in industrial equipment. As part of the development efforts, FORCE2 was partially validated using ANL`s two-dimensional model, FLUFIX, and experimental data. Time constraints as well as the lack of good hydrodynamic data, particularly at the plant scale, prohibited a complete validation of FORCE2. This report describes this initial validation of FORCE2.

  15. Sensing mode atomic force microscope

    DOE Patents [OSTI]

    Hough, Paul V. C.; Wang, Chengpu

    2003-01-01

    An atomic force microscope utilizes a pulse release system and improved method of operation to minimize contact forces between a probe tip affixed to a flexible cantilever and a specimen being measured. The pulse release system includes a magnetic particle affixed proximate the probe tip and an electromagnetic coil. When energized, the electromagnetic coil generates a magnetic field which applies a driving force on the magnetic particle sufficient to overcome adhesive forces exhibited between the probe tip and specimen. The atomic force microscope includes two independently displaceable piezo elements operable along a Z-axis. A controller drives the first Z-axis piezo element to provide a controlled approach between the probe tip and specimen up to a point of contact between the probe tip and specimen. The controller then drives the first Z-axis piezo element to withdraw the cantilever from the specimen. The controller also activates the pulse release system which drives the probe tip away from the specimen during withdrawal. Following withdrawal, the controller adjusts the height of the second Z-axis piezo element to maintain a substantially constant approach distance between successive samples.

  16. DOE Contractor Work Force Restructuring Approval Thresholds

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Contractor Work Force Restructuring Approval Thresholds Up to 100 employees Contractor can ... to provide approval for NNSA work force restructurings in consultation with LM 501 ...

  17. Automatic HTS force measurement instrument

    DOE Patents [OSTI]

    Sanders, Scott T.; Niemann, Ralph C.

    1999-01-01

    A device for measuring the levitation force of a high temperature superconductor sample with respect to a reference magnet includes a receptacle for holding several high temperature superconductor samples each cooled to superconducting temperature. A rotatable carousel successively locates a selected one of the high temperature superconductor samples in registry with the reference magnet. Mechanism varies the distance between one of the high temperature superconductor samples and the reference magnet, and a sensor measures levitation force of the sample as a function of the distance between the reference magnet and the sample. A method is also disclosed.

  18. Automatic HTS force measurement instrument

    DOE Patents [OSTI]

    Sanders, S.T.; Niemann, R.C.

    1999-03-30

    A device is disclosed for measuring the levitation force of a high temperature superconductor sample with respect to a reference magnet includes a receptacle for holding several high temperature superconductor samples each cooled to superconducting temperature. A rotatable carousel successively locates a selected one of the high temperature superconductor samples in registry with the reference magnet. Mechanism varies the distance between one of the high temperature superconductor samples and the reference magnet, and a sensor measures levitation force of the sample as a function of the distance between the reference magnet and the sample. A method is also disclosed. 3 figs.

  19. CNS, labor union donate $15,000 to local March of Dimes | Y-12...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2015 - 4:07pm At a recent kickoff luncheon, Y-12 Site Manager Bill Tindal (right) and Kimberly Mitchell of the Atomic Trades and Labor Council (left) gave a 15,000 check to Susie...

  20. REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7) was first posted on www.wdol.gov on 06/25/2013 ************************************************************************************ REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION By direction of the Secretary of Labor | WAGE AND HOUR DIVISION | WASHINGTON D.C. 20210 | | | | Wage Determination No.: 2005-2574 Diane C. Koplewski Division of | Revision No.: 17 Director Wage Determinations| Date Of Revision:

  1. Casimir force in absorbing multilayers

    SciTech Connect (OSTI)

    Tomas, M.S.

    2002-11-01

    The Casimir effect in a dispersive and absorbing multilayered system is considered adopting the (net) vacuum-field pressure point of view to the Casimir force. Using the properties of the macroscopic field operators appropriate for absorbing systems and a convenient compact form of the Green function for a multilayer, a straightforward and transparent derivation of the Casimir force in a lossless layer of an otherwise absorbing multilayer is presented. The resulting expression, in terms of the reflection coefficients of the surrounding stacks of layers, is of the same form as that obtained by Zhou and Spruch for a purely dispersive multilayer using the (surface) mode summation method [Phys. Rev. A 52, 297 (1995)]. Owing to the recursion relations that the generalized Fresnel coefficients satisfy, this result can be applied to more complex systems with planar symmetry. This is illustrated by calculating the Casimir force on a dielectric (metallic) slab in a planar cavity with realistic mirrors. Also, a relationship between the Casimir force and energy in two different layers is established.

  2. Fuel oil quality task force

    SciTech Connect (OSTI)

    Laisy, J.; Turk, V.

    1997-09-01

    In April, 1996, the R.W. Beckett Corporation became aware of a series of apparently unrelated symptoms that made the leadership of the company concerned that there could be a fuel oil quality problem. A task force of company employees and industry consultants was convened to address the topic of current No. 2 heating oil quality and its effect on burner performance. The task force studied changes in fuel oil specifications and trends in properties that have occurred over the past few years. Experiments were performed at Beckett and Brookhaven National Laboratory to understand the effect of changes in some fuel oil properties. Studies by other groups were reviewed, and field installations were inspected to gain information about the performance of fuel oil that is currently being used in the U.S. and Canada. There was a special concern about the use of red dye in heating oils and the impact of sulfur levels due to the October, 1993 requirement of low sulfur (<0.05%) for on-highway diesel fuel. The results of the task force`s efforts were published in July, 1996. The primary conclusion of the task force was that there is not a crisis or widespread general problem with fuel oil quality. Localized problems that were seen may have been related to refinery practices and/or non-traditional fuel sources. System cleanliness is very important and the cause of many oil burner system problems. Finally, heating oil quality should get ongoing careful attention by Beckett engineering personnel and heating oil industry groups.

  3. Solvent-induced forces in protein folding

    SciTech Connect (OSTI)

    Ben-Naim, A. (Hebrew Univ., Jerusalem (Israel))

    1990-08-23

    The solvent-induced forces between various groups on the protein are examined. It is found that the intramolecular hydrophilic forces are likely to be the strongest forces mediated through the solvent. It is argued that these are probably the most important solvent-induced driving forces in the process of protein folding.

  4. October 9, 2014- SEAB Task Force Meeting

    Broader source: Energy.gov [DOE]

    SECRETARY OF ENERGY ADVISORY BOARDTask Force Meeting on Technology Development for Environmental Management (EM)

  5. Kelvin Probe Force Microscopy in liquid using Electrochemical Force Microscopy

    SciTech Connect (OSTI)

    Collins, Liam; Jesse, Stephen; Kilpatrick, J.; Tselev, Alexander; Okatan, Mahmut Baris; Kalinin, Sergei V.; Rodriguez, Brian

    2015-01-01

    Conventional closed loop-Kelvin probe force microscopy (KPFM) has emerged as a powerful technique for probing electric and transport phenomena at the solid-gas interface. The extension of KPFM capabilities to probe electrostatic and electrochemical phenomena at the solid–liquid interface is of interest for a broad range of applications from energy storage to biological systems. However, the operation of KPFM implicitly relies on the presence of a linear lossless dielectric in the probe-sample gap, a condition which is violated for ionically-active liquids (e.g., when diffuse charge dynamics are present). Here, electrostatic and electrochemical measurements are demonstrated in ionically-active (polar isopropanol, milli-Q water and aqueous NaCl) and ionically-inactive (non-polar decane) liquids by electrochemical force microscopy (EcFM), a multidimensional (i.e., bias- and time-resolved) spectroscopy method. In the absence of mobile charges (ambient and non-polar liquids), KPFM and EcFM are both feasible, yielding comparable contact potential difference (CPD) values. In ionically-active liquids, KPFM is not possible and EcFM can be used to measure the dynamic CPD and a rich spectrum of information pertaining to charge screening, ion diffusion, and electrochemical processes (e.g., Faradaic reactions). EcFM measurements conducted in isopropanol and milli-Q water over Au and highly ordered pyrolytic graphite electrodes demonstrate both sample- and solvent-dependent features. Finally, the feasibility of using EcFM as a local force-based mapping technique of material-dependent electrostatic and electrochemical response is investigated. The resultant high dimensional dataset is visualized using a purely statistical approach that does not require a priori physical models, allowing for qualitative mapping of electrostatic and electrochemical material properties at the solid–liquid interface.

  6. Kelvin Probe Force Microscopy in liquid using Electrochemical Force Microscopy

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Collins, Liam; Jesse, Stephen; Kilpatrick, J.; Tselev, Alexander; Okatan, Mahmut Baris; Kalinin, Sergei V.; Rodriguez, Brian

    2015-01-01

    Conventional closed loop-Kelvin probe force microscopy (KPFM) has emerged as a powerful technique for probing electric and transport phenomena at the solid-gas interface. The extension of KPFM capabilities to probe electrostatic and electrochemical phenomena at the solid–liquid interface is of interest for a broad range of applications from energy storage to biological systems. However, the operation of KPFM implicitly relies on the presence of a linear lossless dielectric in the probe-sample gap, a condition which is violated for ionically-active liquids (e.g., when diffuse charge dynamics are present). Here, electrostatic and electrochemical measurements are demonstrated in ionically-active (polar isopropanol, milli-Q watermore » and aqueous NaCl) and ionically-inactive (non-polar decane) liquids by electrochemical force microscopy (EcFM), a multidimensional (i.e., bias- and time-resolved) spectroscopy method. In the absence of mobile charges (ambient and non-polar liquids), KPFM and EcFM are both feasible, yielding comparable contact potential difference (CPD) values. In ionically-active liquids, KPFM is not possible and EcFM can be used to measure the dynamic CPD and a rich spectrum of information pertaining to charge screening, ion diffusion, and electrochemical processes (e.g., Faradaic reactions). EcFM measurements conducted in isopropanol and milli-Q water over Au and highly ordered pyrolytic graphite electrodes demonstrate both sample- and solvent-dependent features. Finally, the feasibility of using EcFM as a local force-based mapping technique of material-dependent electrostatic and electrochemical response is investigated. The resultant high dimensional dataset is visualized using a purely statistical approach that does not require a priori physical models, allowing for qualitative mapping of electrostatic and electrochemical material properties at the solid–liquid interface.« less

  7. Hickam Air Force Base | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technology Validation » Hickam Air Force Base Hickam Air Force Base Photo of hybrid fuel cell bus at Hickam Air Force Base Hickam Air Force Base spans 2,850 acres in Honolulu, Hawaii. The military base is home to the 15th Airlift Wing, the Hawaii Air National Guard, and the Pacific Air Forces headquarters. With support from the Hawaii Center for Advanced Transportation Technologies and the Air Force Advanced Power Technology Office, Hickam added a fuel cell hybrid electric bus to its fleet in

  8. SAVANNAH RIVER SITE FORCE REPORT

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    FORCE REPORT 3rd Quarter - FY 2016 Data Date:June 30, 2016 Feds/ Prime Contract 1st Tier Teaming Subs Staff Aug / Support Service Craft / Union Hall / Trades Part Time / Limited Service Site TOTAL Federal Organizations DOE-SR 269 7 62 - - 338 DOE-OIG-SR 15 1 - - - 16 NNSA-SRFO 24 1 - 25 NNSA APM 20 2 12 - - 34 NNSA NA-23 10 - 3 - - 13 EM Only Total 269 8 62 - - 339 NNSA Only Total 54 2 16 - - 72 Other Funding Total 15 - - - - 15 Federal Total 338 10 78 - - 426 SRS Contracts SRNS 4,644 - 359 317

  9. ARMY SERiWE FORCES

    Office of Legacy Management (LM)

    ' This doc~omnt consists tif-..$---..-- PaWs ?5-i3s4 " No.,J ______ d&---.copies. series.-f;;i, ' ARMY SERiWE FORCES UNITED STATES ' ENGINEER OFFICE MANHP.~AN Dwmtcr CHIWOO A\RU o,,,c* P. 0. 90x 3140 A CHICA so, ILrlNole 20 June 1945 F' '2 0 Subject: Licenae Agreement - International Pulverizing Corporation - Subcoritract #7401-37-82. To: The District~Eqinssr, U. S. Engineer Office, Manhattan District, Oak Ridge, Tennessee. Attention: Contract Section. As llsted'below, there are

  10. Link Force Holdings Ltd | Open Energy Information

    Open Energy Info (EERE)

    search Name: Link Force Holdings Ltd Place: China Product: China-based energy saving LED street light maker. References: Link Force Holdings Ltd1 This article is a stub. You...

  11. US Wind Force LLC | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Name: US Wind Force LLC Place: Wexford, Pennsylvania Zip: PA 15090-9 Sector: Wind energy Product: US Wind Force, LLC is an independent, privately...

  12. ESPC Success Story - Dyess Air Force Base

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DYESS AIR FORCE BASE DYESS, TEXAS Water Conservation and Green Energy ESPC SUCCESS STORY Dyess Air Force Base and surrounding west Texas has been under extreme-drought water ...

  13. U.S. Air Force (USAF) Air Force Research Laboratory (AFRL)

    Broader source: Energy.gov (indexed) [DOE]

    Benjamin Leever U.S. Air Force (USAF) Air Force Research Laboratory (AFRL) DOE - DoD ... level - Fourth level Fifth level - - - DOD Application Commercial Counterparts Sensor ...

  14. September 2012, Work Force Retention Work Group Status Overview

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Work Force Retention Work Group Status Overview 2 Subgroups: Pro-Force and Non-Pro-Force Pro-Force Subgroup: Accomplishments: 1. Completion of 10 CFR 1046 Protective Force ...

  15. Op-Ed by Secretary of Energy Steven Chu and Secretary of Labor Hilda Solis:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building the American Clean Energy Economy | Department of Energy Op-Ed by Secretary of Energy Steven Chu and Secretary of Labor Hilda Solis: Building the American Clean Energy Economy Op-Ed by Secretary of Energy Steven Chu and Secretary of Labor Hilda Solis: Building the American Clean Energy Economy April 22, 2009 - 12:00am Addthis To commemorate Earth Day, the op-ed below on green jobs and energy independence by Secretaries Steven Chu and Hilda Solis ran in the following papers yesterday

  16. Micromechanism linear actuator with capillary force sealing

    DOE Patents [OSTI]

    Sniegowski, Jeffry J.

    1997-01-01

    A class of micromachine linear actuators whose function is based on gas driven pistons in which capillary forces are used to seal the gas behind the piston. The capillary forces also increase the amount of force transmitted from the gas pressure to the piston. In a major subclass of such devices, the gas bubble is produced by thermal vaporization of a working fluid. Because of their dependence on capillary forces for sealing, such devices are only practical on the sub-mm size scale, but in that regime they produce very large force times distance (total work) values.

  17. Hyperbaric Hydrothermal Atomic Force Microscope

    DOE Patents [OSTI]

    Knauss, Kevin G.; Boro, Carl O.; Higgins, Steven R.; Eggleston, Carrick M.

    2003-07-01

    A hyperbaric hydrothermal atomic force microscope (AFM) is provided to image solid surfaces in fluids, either liquid or gas, at pressures greater than normal atmospheric pressure. The sample can be heated and its surface imaged in aqueous solution at temperatures greater than 100.degree. C. with less than 1 nm vertical resolution. A gas pressurized microscope base chamber houses the stepper motor and piezoelectric scanner. A chemically inert, flexible membrane separates this base chamber from the sample cell environment and constrains a high temperature, pressurized liquid or gas in the sample cell while allowing movement of the scanner. The sample cell is designed for continuous flow of liquid or gas through the sample environment.

  18. Hyperbaric hydrothermal atomic force microscope

    DOE Patents [OSTI]

    Knauss, Kevin G.; Boro, Carl O.; Higgins, Steven R.; Eggleston, Carrick M.

    2002-01-01

    A hyperbaric hydrothermal atomic force microscope (AFM) is provided to image solid surfaces in fluids, either liquid or gas, at pressures greater than normal atmospheric pressure. The sample can be heated and its surface imaged in aqueous solution at temperatures greater than 100.degree. C. with less than 1 nm vertical resolution. A gas pressurized microscope base chamber houses the stepper motor and piezoelectric scanner. A chemically inert, flexible membrane separates this base chamber from the sample cell environment and constrains a high temperature, pressurized liquid or gas in the sample cell while allowing movement of the scanner. The sample cell is designed for continuous flow of liquid or gas through the sample environment.

  19. Dark Forces At The Tevatron

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Buckley, Matt; Fileviez Perez, Pavel; Hooper, Dan; Neil, Ethan

    2011-08-19

    A simple explanation of the W + dijet excess recently reported by the CDF collaboration involves the introduction of a new gauge boson with sizable couplings to quarks, but with no or highly suppressed couplings to leptons. Anomaly-free theories which include such a leptophobic gauge boson must also include additional particle content, which may include a stable and otherwise viable candidate for dark matter. Based on the couplings and mass of the Z` required to generate the CDF excess, we predict such a dark matter candidate to possess an elastic scattering cross section with nucleons on the order of σmore » ~ 10-40 cm2, providing a natural explanation for the signals reported by the CoGeNT and DAMA/LIBRA collaborations. In this light, CDF may be observing the gauge boson responsible for the force which mediates the interactions between the dark and visible matter of our universe.« less

  20. Davis-Bacon Labor Rates for Weatherization Work in Multifamily Buildings

    Broader source: Energy.gov [DOE]

    U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE) Weatherization Assistance Program Notice 10-04 deals with labor rates (wages) for weatherization work in large multifamily buildings that comply with the Davis-Bacon Act requirements of the 2009 Recovery Act.

  1. Authorize_Changes_Contractor_Work_Force_Restructuring_Policy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AuthorizeChangesContractorWorkForceRestructuringPolicy.pdf AuthorizeChangesContractorWorkForceRestructuringPolicy.pdf PDF icon AuthorizeChangesContractorWorkForceR...

  2. Casimir force between integrable and chaotic pistons

    SciTech Connect (OSTI)

    Alvarez, Ezequiel; Mazzitelli, Francisco D.; Wisniacki, Diego A. [Departamento de Fisica, Facultad de Ciencias Exactas y Naturales Universidad de Buenos Aires, and Instituto de Fisica de Buenos Aires, Concejo Nacional de Investigaciones Cientificas y Tecnicas, Ciudad Universitaria, Pabellon I, 1428 Buenos Aires (Argentina); Monastra, Alejandro G. [Gerencia de Investigacion y Aplicaciones, Comision Nacional de Energia Atomica, Concejo Nacional de Investigaciones Cientificas y Tecnicas, Avenida General Paz 1499, 1650 San Martin (Argentina)

    2010-11-15

    We have computed numerically the Casimir force between two identical pistons inside a very long cylinder, considering different shapes for the pistons. The pistons can be considered quantum billiards, whose spectrum determines the vacuum force. The smooth part of the spectrum fixes the force at short distances and depends only on geometric quantities like the area or perimeter of the piston. However, correcting terms to the force, coming from the oscillating part of the spectrum which is related to the classical dynamics of the billiard, could be qualitatively different for classically integrable or chaotic systems. We have performed a detailed numerical analysis of the corresponding Casimir force for pistons with regular and chaotic classical dynamics. For a family of stadium billiards, we have found that the correcting part of the Casimir force presents a sudden change in the transition from regular to chaotic geometries. This suggests that there could be signatures of quantum chaos in the Casimir effect.

  3. Protective Forces | National Nuclear Security Administration | (NNSA)

    National Nuclear Security Administration (NNSA)

    Protective Forces NNSA has some of the best trained and best equipped forces protecting its nuclear weapons and material. Since the events of September 11, 2001, NNSA has hired additional armed security police officers. It has also shifted towards a paramilitary, "tactical response force" that utilizes a robust mix of offensive and defensive qualified officers who are well-trained in small team and weapons tactics. It has improved its training capabilities by expanding training ranges

  4. ARM - PI Product - Direct Aerosol Forcing Uncertainty

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ProductsDirect Aerosol Forcing Uncertainty ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send PI Product : Direct Aerosol Forcing Uncertainty Understanding sources of uncertainty in aerosol direct radiative forcing (DRF), the difference in a given radiative flux component with and without aerosol, is essential to quantifying changes in Earth's radiation budget. We examine the uncertainty in DRF due to measurement

  5. Piezoresponse Force Microscopy: A Window into Electromechanical...

    Office of Scientific and Technical Information (OSTI)

    Behavior at the Nanoscale Citation Details In-Document Search Title: Piezoresponse Force Microscopy: A Window into Electromechanical Behavior at the Nanoscale Authors: Bonnell, ...

  6. Sandia Energy - Air Force Research Laboratory Testing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    from the Air Force Research Laboratory in Albuquerque utilized the site at the National Solar Thermal Test Facility to evaluate seismic and optical activity from explosives set...

  7. Sandia Energy - Air Force Research Laboratory Testing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the Air Force Research Laboratory (AFRL) in Albuquerque utilized the site at the National Solar Thermal Test Facility (NSTTF) to evaluate seismic and optical activity from...

  8. NREL: Measurements and Characterization - Atomic Force Microscopy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Atomic Force Microscopy Atomic Force Microscopy (AFM) operates in several modes. In contact mode, a tip that is attached to a cantilever is scanned over the sample surface, while the force between tip and sample is measured. While the tip is scanned laterally, the force is kept constant by moving the cantilever/tip assembly up and down, so that the deflection of the cantilever is kept constant. The vertical movement of the cantilever/tip assembly is recorded and used to generate an image of the

  9. Weardale Task Force | Open Energy Information

    Open Energy Info (EERE)

    that is developing a sustainable community in the East gate area which will be run on wind, solar, biomass, geothermal and hydro power. References: Weardale Task Force1...

  10. Nuclear Radiological Threat Task Force Established | National...

    National Nuclear Security Administration (NNSA)

    Nuclear Radiological Threat Task Force Established Washington, DC NNSA's Administrator Linton Brooks announces the establishment of the Nuclear Radiological Threat Reduction Task ...

  11. Interagency Energy Management Task Force Members

    Broader source: Energy.gov [DOE]

    The Interagency Energy Management Task Force is led by the Federal Energy Management Program director. Members include energy and sustainability managers from federal agencies.

  12. Elastic actuator for precise force control

    DOE Patents [OSTI]

    Pratt, G.A.; Williamson, M.M.

    1997-07-22

    The invention provides an elastic actuator consisting of a motor and a motor drive transmission connected at an output of the motor. An elastic element is connected in series with the motor drive transmission, and this elastic element is positioned to alone support the full weight of any load connected at an output of the actuator. A single force transducer is positioned at a point between a mount for the motor and an output of the actuator. This force transducer generates a force signal, based on deflection of the elastic element, that indicates force applied by the elastic element to an output of the actuator. An active feedback force control loop is connected between the force transducer and the motor for controlling the motor. This motor control is based on the force signal to deflect the elastic element an amount that produces a desired actuator output force. The produced output force is substantially independent of load motion. The invention also provides a torsional spring consisting of a flexible structure having at least three flat sections each connected integrally with and extending radially from a central section. Each flat section extends axially along the central section from a distal end of the central section to a proximal end of the central section. 30 figs.

  13. Elastic actuator for precise force control

    DOE Patents [OSTI]

    Pratt, Gill A.; Williamson, Matthew M.

    1997-07-22

    The invention provides an elastic actuator consisting of a motor and a motor drive transmission connected at an output of the motor. An elastic element is connected in series with the motor drive transmission, and this elastic element is positioned to alone support the full weight of any load connected at an output of the actuator. A single force transducer is positioned at a point between a mount for the motor and an output of the actuator. This force transducer generates a force signal, based on deflection of the elastic element, that indicates force applied by the elastic element to an output of the actuator. An active feedback force control loop is connected between the force transducer and the motor for controlling the motor. This motor control is based on the force signal to deflect the elastic element an amount that produces a desired actuator output force. The produced output force is substantially independent of load motion. The invention also provides a torsional spring consisting of a flexible structure having at least three flat sections each connected integrally with and extending radially from a central section. Each flat section extends axially along the central section from a distal end of the central section to a proximal end of the central section.

  14. Muon Collider Task Force Report

    SciTech Connect (OSTI)

    Ankenbrandt, C.; Alexahin, Y.; Balbekov, V.; Barzi, E.; Bhat, C.; Broemmelsiek, D.; Bross, A.; Burov, A.; Drozhdin, A.; Finley, D.; Geer, S.; /Fermilab /Argonne /Brookhaven /Jefferson Lab /LBL, Berkeley /MUONS Inc., Batavia /UCLA /UC, Riverside /Mississippi U.

    2007-12-01

    Muon Colliders offer a possible long term path to lepton-lepton collisions at center-of-mass energies {radical}s {ge} 1 TeV. In October 2006 the Muon Collider Task Force (MCTF) proposed a program of advanced accelerator R&D aimed at developing the Muon Collider concept. The proposed R&D program was motivated by progress on Muon Collider design in general, and in particular, by new ideas that have emerged on muon cooling channel design. The scope of the proposed MCTF R&D program includes muon collider design studies, helical cooling channel design and simulation, high temperature superconducting solenoid studies, an experimental program using beams to test cooling channel RF cavities and a 6D cooling demonstration channel. The first year of MCTF activities are summarized in this report together with a brief description of the anticipated FY08 R&D activities. In its first year the MCTF has made progress on (1) Muon Collider ring studies, (2) 6D cooling channel design and simulation studies with an emphasis on the HCC scheme, (3) beam preparations for the first HPRF cavity beam test, (4) preparations for an HCC four-coil test, (5) further development of the MANX experiment ideas and studies of the muon beam possibilities at Fermilab, (6) studies of how to integrate RF into an HCC in preparation for a component development program, and (7) HTS conductor and magnet studies to prepare for an evaluation of the prospects for of an HTS high-field solenoid build for a muon cooling channel.

  15. PV Installation Labor Market Analysis and PV JEDI Tool Developments (Presentation)

    SciTech Connect (OSTI)

    Friedman, B.

    2012-06-01

    The potential economic benefits of the growing renewable energy sector have led to increased federal, state, and local investments in solar industries, including federal grants for expanded workforce training for U.S. solar installers. However, there remain gaps in the data required to understand the size and composition of the workforce needed to meet the demand for solar power. Through primary research on the U.S. solar installation employer base, this report seeks to address that gap, improving policymakers and other solar stakeholders understanding of both the evolving needs of these employers and the economic opportunity associated with solar market development. Included are labor market data covering current U.S. employment, expected industry growth, and employer skill preferences for solar installation-related occupations. This study offers an in-depth look at the solar installation sectors. A study published by the Solar Foundation in October 2011 provides a census of labor data across the entire solar value chain.

  16. MEAM interatomic force calculation subroutine for LAMMPS

    Energy Science and Technology Software Center (OSTI)

    2010-10-25

    Interatomic force and energy calculation subroutine tobe used with the molecular dynamics simulation code LAMMPS (Ref a.). The code evaluates the total energy and atomic forces (energy gradient) according to cubic spine-based variant (Ref b.) of the Modified Embedded Atom Method (MEAM).

  17. An improved proximity force approximation for electrostatics

    SciTech Connect (OSTI)

    Fosco, Cesar D.; Instituto Balseiro, Universidad Nacional de Cuyo, R8402AGP Bariloche ; Lombardo, Fernando C.; IFIBA ; Mazzitelli, Francisco D.

    2012-08-15

    A quite straightforward approximation for the electrostatic interaction between two perfectly conducting surfaces suggests itself when the distance between them is much smaller than the characteristic lengths associated with their shapes. Indeed, in the so called 'proximity force approximation' the electrostatic force is evaluated by first dividing each surface into a set of small flat patches, and then adding up the forces due two opposite pairs, the contributions of which are approximated as due to pairs of parallel planes. This approximation has been widely and successfully applied in different contexts, ranging from nuclear physics to Casimir effect calculations. We present here an improvement on this approximation, based on a derivative expansion for the electrostatic energy contained between the surfaces. The results obtained could be useful for discussing the geometric dependence of the electrostatic force, and also as a convenient benchmark for numerical analyses of the tip-sample electrostatic interaction in atomic force microscopes. - Highlights: Black-Right-Pointing-Pointer The proximity force approximation (PFA) has been widely used in different areas. Black-Right-Pointing-Pointer The PFA can be improved using a derivative expansion in the shape of the surfaces. Black-Right-Pointing-Pointer We use the improved PFA to compute electrostatic forces between conductors. Black-Right-Pointing-Pointer The results can be used as an analytic benchmark for numerical calculations in AFM. Black-Right-Pointing-Pointer Insight is provided for people who use the PFA to compute nuclear and Casimir forces.

  18. armed forces | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    armed forces CNS employees greet Honor Air veterans Y-12 Deputy Site Manager Gene Sievers, left, and ProForce's Neal Wolfenbarger pose for photo at McGhee Tyson Airport in Knoxville, TN, as Wolfenbarger waits on his uncle to return from Washington, D.C. Veterans Day is important to all Americans, but it carries an even more elevated meaning to those

  19. Interview: LaborWorks@NeighborWorks Provides Vermont Contractors With Help When They Need It

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Focus Series LaborWorks@NeighborWorks Provides Vermont Contractors With Help When They Need It NeighborWorks of Western Vermont (NWWVT), a nonprofit home ownership organization based in Rutland County, Vermont, received $4.5 million in seed funding from the U.S. Department of Energy's Better Buildings Neighborhood Program to help Vermonters complete home energy efficiency upgrades. NWWVT created the Home Energy Assistance Team (HEAT Squad) in 2010 to make it easy for homeowners to proceed with

  20. Macroscopic model of scanning force microscope

    DOE Patents [OSTI]

    Guerra-Vela, Claudio; Zypman, Fredy R.

    2004-10-05

    A macroscopic version of the Scanning Force Microscope is described. It consists of a cantilever under the influence of external forces, which mimic the tip-sample interactions. The use of this piece of equipment is threefold. First, it serves as direct way to understand the parts and functions of the Scanning Force Microscope, and thus it is effectively used as an instructional tool. Second, due to its large size, it allows for simple measurements of applied forces and parameters that define the state of motion of the system. This information, in turn, serves to compare the interaction forces with the reconstructed ones, which cannot be done directly with the standard microscopic set up. Third, it provides a kinematics method to non-destructively measure elastic constants of materials, such as Young's and shear modules, with special application for brittle materials.

  1. Measurement of tool forces in diamond turning

    SciTech Connect (OSTI)

    Drescher, J.; Dow, T.A.

    1988-12-01

    A dynamometer has been designed and built to measure forces in diamond turning. The design includes a 3-component, piezoelectric transducer. Initial experiments with this dynamometer system included verification of its predicted dynamic characteristics as well as a detailed study of cutting parameters. Many cutting experiments have been conducted on OFHC Copper and 6061-T6 Aluminum. Tests have involved investigation of velocity effects, and the effects of depth and feedrate on tool forces. Velocity has been determined to have negligible effects between 4 and 21 m/s. Forces generally increase with increasing depth of cut. Increasing feedrate does not necessarily lead to higher forces. Results suggest that a simple model may not be sufficient to describe the forces produced in the diamond turning process.

  2. Sensing Current and Forces with SPM

    SciTech Connect (OSTI)

    Park, Jeong Y.; Maier, Sabine; Hendriksen, Bas; Salmeron, Miquel

    2010-07-02

    Atomic force microscopy (AFM) and scanning tunneling microscopy (STM) are well established techniques to image surfaces and to probe material properties at the atomic and molecular scale. In this review, we show hybrid combinations of AFM and STM that bring together the best of two worlds: the simultaneous detection of atomic scale forces and conduction properties. We illustrate with several examples how the detection of forces during STM and the detection of currents during AFM can give valuable additional information of the nanoscale material properties.

  3. air force | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    air force NNSA, Air Force Complete Successful B61-12 Life Extension Program Development Flight Test at Tonopah Test Range WASHINGTON - The National Nuclear Security Administration (NNSA) and United States Air Force completed the third development flight test of a non-nuclear B61-12 nuclear gravity bomb at Tonopah Test Range in Nevada on October 20, 2015. "This demonstration of effective end-to-end system... The man who trains everyone on the bombs Mark Meyer, training coordinator and field

  4. SCM Forcing Data Derived from NWP Analyses

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Jakob, Christian

    2008-01-15

    Forcing data, suitable for use with single column models (SCMs) and cloud resolving models (CRMs), have been derived from NWP analyses for the ARM (Atmospheric Radiation Measurement) Tropical Western Pacific (TWP) sites of Manus Island and Nauru.

  5. Force 9 Energy | Open Energy Information

    Open Energy Info (EERE)

    9 Energy Jump to: navigation, search Name: Force 9 Energy Place: Amersham, United Kingdom Zip: HP7 0UT Sector: Wind energy Product: Joint owner of Abercairny windfarm development....

  6. Micromechanical apparatus for measurement of forces (Patent)...

    Office of Scientific and Technical Information (OSTI)

    deflection element (e.g. a ring or annulus) suspended above a substrate for deflection by an applied force, and one or more distance scales for optically measuring the deflection. ...

  7. Solar Trackers at Nellis Air Force Base

    Broader source: Energy.gov [DOE]

    This photograph features one of many SunPower T20 Tracker that are part of the 14.2-megawatt photovoltaic (PV) systems installed at Nellis Air Force Base in Nevada, which was the largest PV system...

  8. Clinch River MRS Task Force Recommendations

    Broader source: Energy.gov [DOE]

    The Clinch River HRS Task Force was appointed in July 1985 by the Roane County Executive and the Oak Ridge City Council to evaluate the Monitored Retrievable Storage (MRS) facility proposed by the...

  9. Interpretation of long-range interatomic force

    SciTech Connect (OSTI)

    Buldum, A.; Ciraci, S.; Fong, C.Y.; Nelson, J.S.

    1999-02-01

    Recent direct mechanical measurements of atomic force microscopy showed that the force between the silicon tip and the silicon sample is long range in the attractive region and its magnitude at maximum is relatively smaller. These features disagree with previous theoretical predictions based on the {ital ab initio} calculations. We investigated the nature of forces between a silicon tip and the silicon (111)-(2{times}1) surface by performing first-principles pseudopotential and classical molecular dynamics calculations and by calculating the van der Waals interaction. The first two methods give forces that are short range in nature. Fair agreement between the experiment and theory is obtained when the van der Waals interaction is included. The effect of the tip induced deformation is analyzed. {copyright} {ital 1999} {ital The American Physical Society}

  10. protective force | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    The Protective Force successfully completed a recent assessment by the U.S. Department of Energy's Office of Enterprise Assessments. The Pantex Plant recently hosted the U.S. ...

  11. Attack optimization at moderate force levels

    SciTech Connect (OSTI)

    Canavan, G.H.

    1997-04-01

    Optimal offensive missile allocations for moderate offensive and defensive forces are derived and used to study their sensitivity to force structure parameters levels. It is shown that the first strike cost is a product of the number of missiles and a function of the optimum allocation. Thus, the conditions under which the number of missiles should increase or decrease in time is also determined by this allocation.

  12. DOE Contractor Work Force Restructuring Approval Thresholds

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Contractor Work Force Restructuring Approval Thresholds Up to 100 employees Contractor can make decision bit must notify DOE of intent of restructuring 101-200 employees DOE/NNSA field office is authorized to provide approval 201-500 employees LM is authorized to provide approval and NNSA Administrator is authorized to provide approval for NNSA work force restructurings in consultation with LM 501 and above employees Under Secretary/NNSA Administrator approval required

  13. Micromechanical apparatus for measurement of forces

    DOE Patents [OSTI]

    Tanner, Danelle Mary; Allen, James Joe

    2004-05-25

    A new class of micromechanical dynamometers has been disclosed which are particularly suited to fabrication in parallel with other microelectromechanical apparatus. Forces in the microNewton regime and below can be measured with such dynamometers which are based on a high-compliance deflection element (e.g. a ring or annulus) suspended above a substrate for deflection by an applied force, and one or more distance scales for optically measuring the deflection.

  14. Electrochemistry on the nanoscale: the force dimension (Journal...

    Office of Scientific and Technical Information (OSTI)

    Electrochemistry on the nanoscale: the force dimension Citation Details In-Document Search Title: Electrochemistry on the nanoscale: the force dimension Authors: Black, Jennifer M ...

  15. Electrochemistry at the Nanoscale: The Force Dimension (Journal...

    Office of Scientific and Technical Information (OSTI)

    Electrochemistry at the Nanoscale: The Force Dimension Citation Details In-Document Search Title: Electrochemistry at the Nanoscale: The Force Dimension Authors: Black, Jennifer M ...

  16. Climate Change Task Force Webinar Series | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    State, Local, and Tribal Leaders Task Force on Climate Preparedness and Resilience. ... Task Force on Climate Preparedness and Resilience, established by an Executive Order in ...

  17. Radiative Forcing of Climate Change (Book) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Visit OSTI to utilize additional information resources in energy science and technology. A ... Forcings due to Chemistry 6.7 The Direct Radiative Forcing of Tropospheric ...

  18. FORCE RECONSTRUCTION USING THE SUM OF WEIGHTED ACCELERATIONS

    Office of Scientific and Technical Information (OSTI)

    to produce the reconstructed and to mitigate the shock to the interiorcomponents. force. ... the impact forces so that interior components can be designed to withstand the shock. ...

  19. Task Force on Climate Preparedness and Resilience Announces Tribal...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Task Force on Climate Preparedness and Resilience Announces Tribal Climate Resilience Program Task Force on Climate Preparedness and Resilience Announces Tribal Climate Resilience ...

  20. Coating thickness and coverage effects on the forces between...

    Office of Scientific and Technical Information (OSTI)

    forces between silica nanoparticles in water. Citation Details In-Document Search Title: Coating thickness and coverage effects on the forces between silica nanoparticles in water. ...

  1. Linkage to Previous International PV Module QA Task Force Workshops...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Linkage to Previous International PV Module QA Task Force Workshops: Proposal for Rating System Linkage to Previous International PV Module QA Task Force Workshops: Proposal for ...

  2. Air Force Achieves Fuel Efficiency through Industry Best Practices...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Force Achieves Fuel Efficiency through Industry Best Practices Air Force Achieves Fuel Efficiency through Industry Best Practices Fact sheet offers an overview of the U.S. Air ...

  3. Before Senate Subcommittee on Strategic Forces - Committee on...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    on Strategic Forces - Committee on Armed Services Before Senate Subcommittee on Strategic Forces - Committee on Armed Services By: David Huizenga, Senior Advisor for...

  4. Nuclear Forces and High-Performance Computing: The Perfect Match...

    Office of Scientific and Technical Information (OSTI)

    Conference: Nuclear Forces and High-Performance Computing: The Perfect Match Citation Details In-Document Search Title: Nuclear Forces and High-Performance Computing: The Perfect ...

  5. Dyess Air Force Base Water Conservation and Green Energy | Department...

    Energy Savers [EERE]

    Dyess Air Force Base Water Conservation and Green Energy Dyess Air Force Base Water Conservation and Green Energy Fact sheet describes the Federal Energy Management Program (FEMP) ...

  6. Collaborative Utility Task Force Partners with DOE to Develop...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Collaborative Utility Task Force Partners with DOE to Develop Cyber Security Requirements for Advanced Metering Infrastructure Collaborative Utility Task Force Partners with DOE to ...

  7. Collective behaviors of the Casimir force in microelectromechanical...

    Office of Scientific and Technical Information (OSTI)

    Collective behaviors of the Casimir force in microelectromechanical systems Citation Details In-Document Search Title: Collective behaviors of the Casimir force in ...

  8. Clean Air Task Force CATF | Open Energy Information

    Open Energy Info (EERE)

    Force (CATF) Place: Boston, Massachusetts Zip: 2108 Product: Massachusetts-based scientific research and legal advocacy center. References: Clean Air Task Force (CATF)1 This...

  9. Government and Industry A Force for Collaboration at the Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Government and Industry A Force for Collaboration at the Energy Roadmap Update Workshop Government and Industry A Force for Collaboration at the Energy Roadmap Update Workshop ...

  10. Federal Task Force Sends Recommendations to President on Fostering...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Federal Task Force Sends Recommendations to President on Fostering Clean Coal Technology Federal Task Force Sends Recommendations to President on Fostering Clean Coal Technology ...

  11. Implementation Plan, 29 Recommendations of the Protective Force...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Implementation Plan, 29 Recommendations of the Protective Force Career Options Study Group - January 2011 Implementation Plan, 29 Recommendations of the Protective Force Career...

  12. Protective Force Protocols for ESS Supported Performance Tests...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Protective Force Protocols for ESS Supported Performance Tests and Exercises, March 12, 2007 Protective Force Protocols for ESS Supported Performance Tests and Exercises, March 12, ...

  13. Electrodynamic force of dielectric barrier discharge

    SciTech Connect (OSTI)

    Shang, J. S.; Roveda, F.; Huang, P. G.

    2011-06-01

    The periodic electrostatic force of dielectric barrier discharge (DBD) in nitrogen for flow control is investigated by a system of physics-based, two-dimensional model equations. The plasma generation process of DBD is mainly the avalanche growth of electrons through the secondary emission from cathode. Therefore, the charged particle motion of a succession of random micro discharges can be approximated by the drift-diffusion model. The force of DBD generated by charge separation and accumulation over the dielectrics is obtained by solving the model equations with the rigorous media interface boundary condition of Maxwell equations in the time domain. The discharge structure and force components by different electrical permittivity and amplitudes of externally applied electrical potential are delineated and quantified.

  14. Spray bottle apparatus with force multiply pistons

    DOE Patents [OSTI]

    Eschbach, Eugene A.

    1992-01-01

    The present invention comprises a spray bottle in which the pressure resulting from the gripping force applied by the user is amplified and this increased pressure used in generating a spray such as an aerosol or fluid stream. In its preferred embodiment, the invention includes a high pressure chamber and a corresponding piston which is operative for driving fluid out of this chamber at high pressure through a spray nozzle and a low pressure chamber and corresponding piston which is acted upon by the hydraulic pressure within the bottle resulting from the gripping force. The low pressure chamber and piston are of larger size than the high pressure chamber and piston. The pistons are rigidly connected so that the force created by the pressure acting on the piston in the low pressure chamber is transmitted to the piston in the high pressure chamber where it is applied over a more limited area thereby generating greater hydraulic pressure for use in forming the spray.

  15. Protective Force Contingency Planning Technical Standard

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE STANDARD PROTECTIVE FORCE CONTINGENCY PLANNING TECHNICAL STANDARD U.S. Department of Energy Washington, D.C. 20585 DOE-STD-1213-2014 JULY 2014 ──────────────── CHANGE NOTICE NO.1 SEPTEMBER 2015 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE This page intentionally left blank. DOE-STD-1213-2014 i ATTACHMENT 1 Change Notice No. 1 DOE-STD-1213-2014 September 2015 Protective Force Contingency Planning

  16. Fidelity imaging for atomic force microscopy

    SciTech Connect (OSTI)

    Ghosal, Sayan Salapaka, Murti

    2015-01-05

    Atomic force microscopy is widely employed for imaging material at the nanoscale. However, real-time measures on image reliability are lacking in contemporary atomic force microscopy literature. In this article, we present a real-time technique that provides an image of fidelity for a high bandwidth dynamic mode imaging scheme. The fidelity images define channels that allow the user to have additional authority over the choice of decision threshold that facilitates where the emphasis is desired, on discovering most true features on the sample with the possible detection of high number of false features, or emphasizing minimizing instances of false detections. Simulation and experimental results demonstrate the effectiveness of fidelity imaging.

  17. Strategic forces: Future requirements and options

    SciTech Connect (OSTI)

    Speed, R.D.

    1990-11-01

    In the wake of the collapse of the Warsaw Pact and the apparent ending of the Cold War, there have been renewed calls for radical cuts in US strategic forces to levels far below the 10,000 or so warheads allowed each side under the current START proposal. Since it now appears that NATO for the first time will have the capability to defeat a Soviet conventional attack without the necessity of threatening to resort to nuclear weapons, this should pave the way for the rethinking of US strategy and the reduction of US strategic weapons requirements. In this new environment, it seems plausible that, with a modification of the Flexible Response doctrine to forego attempts to disarm the Soviet Union, deterrence could be maintained with 1500 or so survivable strategic weapons. With a new strategy that confined US strategic weapons to the role of deterring the use of nuclear weapons by other countries, a survivable force of about 500 weapons would seem sufficient. With this premise, the implications for the US strategic force structure are examined for two cases: a treaty that allows each side 3000 warheads and one that allows each side 1000 warheads. In Part 1 of this paper, the weapons requirements for deterrence are examined in light of recent changes in the geopolitical environment. In Part 2, it is assumed that the President and Congress have decided that deep cuts in strategic forces are acceptable. 128 refs., 12 figs., 12 tabs. (JF)

  18. Direct Lorentz force compensation flowmeter for electrolytes

    SciTech Connect (OSTI)

    Vasilyan, S. Froehlich, Th.

    2014-12-01

    A simplified method of contactless Lorentz force (LF) measurements for flow meters on electrolytes is described and realized. Modification and comparative representation are discussed against recently well-developed methods. Based on the catapult effect, that current carrying conductor experiences a repulsive force in a magnetic field, we demonstrate force measurement method of LF velocimetry applications by commonly known electromagnetic force compensation principle. Measurement approach through zero point stability is considered to minimize mechanical influences and avoid gravimetric uncertainties. Here, the current carrying wires are static fixed in the vicinity of magnet system at zero point stable position, while occurring deflection of magnets by electrolyte flow is compensated by external applied current within wires. Measurements performed by developed servo-system which drives control loop by means of optical position sensor for simplified (i) single wire and (ii) coil-like extended compensation schemes. Guided by experiments on electrolyte flow, we demonstrate the applicability of adopted principle for conductivities ranging from 2 to 20?S/m. Further improvements are discussed in agreement with the parameters of demonstration setup, straightforward theory, and experimental results. We argue that this method is potentially suitable for: (a) applications with higher conductivity like molten metal (order of 10{sup 6?}S/m) assuming spatial configuration of setup and (b) for lower range of conductivity (below 1?S/m) while this is strongly subject to stiffness of system and noise mainly mechanical and thermal radiations.

  19. Protective Force Contingency Planning Technical Standard

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    NOT MEASUREMENT SENSITIVE DOE-STD-1213-2014 July 2014 DOE HANDBOOK PROTECTIVE FORCE CONTINGENCY PLANNING TECHNICAL STANDARD U.S. Department of Energy Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This page intentionally left blank. DOE-STD-1213-2014 i CONTENTS FOREWORD .............................................................................................................................v 1. INTRODUCTION

  20. U.S. Transport Task Force 2010

    SciTech Connect (OSTI)

    Diamond, P.H.

    2011-09-21

    The Transport Task Force (TTF) Meeting is a venue for vigorous scientific discourse and discussion on topics in transport and turbulence in fusion plasmas. Its participation is international. The 2010 meeting was highly effective, with 139 registered participants and 131 presentations. This is remarkable for an even year (IAEA year) meeting. The meeting clearly fostered progress in understanding and control of turbulent transport.

  1. NEW - DOE O 333.1, Administering Work Force Discipline

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    The order provides requirements and responsibilities for administering work force discipline and corrective actions.

  2. Work Force Retention Work Group Charter | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Force Retention Work Group Charter Work Force Retention Work Group Charter The Work force Retention Work Group is established to support the Department's critical focus on maintaining a high-performing work force at a time when a significant number of the workers needed to support DOE's national security mission are reaching retirement age. Work Force Retention Work Group Charter (86.92 KB) More Documents & Publications Workforce Retention Work Group Status Overview - September 2012 Training

  3. Air Force Enhanced Use Lease | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Enhanced Use Lease Air Force Enhanced Use Lease Presentation-given at the Fall 2012 Federal Utility Partnership Working Group (FUPWG) meeting-discusses the U.S. Air Force's (USAF's) enhanced use leases (EULs), including energy EULs and EUL goals. Download the Air Force Enhanced Use Lease presentation. (594.58 KB) More Documents & Publications Air Force Renewable Energy Programs Assessment of Small Modular Reactor Suitability for Use On or Near Air Force Space Command Installations SAND

  4. Federal Smart Grid Task Force | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Federal Smart Grid Task Force Federal Smart Grid Task Force Task Force Background The Federal Smart Grid Task Force was established under Title XIII of the Energy Independence and Security Act of 2007 (EISA) and includes experts from eleven Federal agencies. The Department of Energy is represented by the Office of Electricity Delivery and Energy Reliability which is the Task Force lead, as well as the Office of Energy Efficiency and Renewable Energy and the National Energy Technology Laboratory.

  5. Interagency Energy Management Task Force Members | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Interagency Energy Management Task Force Members Interagency Energy Management Task Force Members The Interagency Energy Management Task Force is led by the Federal Energy Management Program director. Members include energy and sustainability managers from federal agencies. Task Force Executive Director Dr. Timothy Unruh U.S. Department of Energy 202-586-5772 Task Force Members Organization Primary Contact Alternate Contact General Services Administration Mark Ewing Karren Curran National

  6. Atomically resolved force microscopy at room temperature

    SciTech Connect (OSTI)

    Morita, Seizo

    2014-04-24

    Atomic force microscopy (AFM) can now not only image individual atoms but also construct atom letters using atom manipulation method even at room temperature (RT). Therefore, the AFM is the second generation atomic tool following the scanning tunneling microscopy (STM). However the AFM can image even insulating atoms, and also directly measure/map the atomic force and potential at the atomic scale. Noting these advantages, we have been developing a bottom-up nanostructuring system at RT based on the AFM. It can identify chemical species of individual atoms and then manipulate selected atom species to the predesigned site one-by-one to assemble complex nanostructures consisted of multi atom species at RT. Here we introduce our results toward atom-by-atom assembly of composite nanostructures based on the AFM at RT including the latest result on atom gating of nano-space for atom-by-atom creation of atom clusters at RT for semiconductor surfaces.

  7. Friction forces on atoms after acceleration

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Intravaia, Francesco; Mkrtchian, Vanik E.; Buhmann, Stefan Yoshi; Scheel, Stefan; Dalvit, Diego A. R.; Henkel, Carsten

    2015-05-12

    The aim of this study is to revisit the calculation of atom–surface quantum friction in the quantum field theory formulation put forward by Barton (2010 New J. Phys. 12 113045). We show that the power dissipated into field excitations and the associated friction force depend on how the atom is boosted from being initially at rest to a configuration in which it is moving at constant velocity (v) parallel to the planar interface. In addition, we point out that there is a subtle cancellation between the one-photon and part of the two-photon dissipating power, resulting in a leading order contributionmore » to the frictional power which goes as v4. These results are also confirmed by an alternative calculation of the average radiation force, which scales as v3.« less

  8. Friction forces on atoms after acceleration

    SciTech Connect (OSTI)

    Intravaia, Francesco; Mkrtchian, Vanik E.; Buhmann, Stefan Yoshi; Scheel, Stefan; Dalvit, Diego A. R.; Henkel, Carsten

    2015-05-12

    The aim of this study is to revisit the calculation of atom–surface quantum friction in the quantum field theory formulation put forward by Barton (2010 New J. Phys. 12 113045). We show that the power dissipated into field excitations and the associated friction force depend on how the atom is boosted from being initially at rest to a configuration in which it is moving at constant velocity (v) parallel to the planar interface. In addition, we point out that there is a subtle cancellation between the one-photon and part of the two-photon dissipating power, resulting in a leading order contribution to the frictional power which goes as v4. These results are also confirmed by an alternative calculation of the average radiation force, which scales as v3.

  9. Illinois task force on global climate change

    SciTech Connect (OSTI)

    Griffin, B.S.

    1996-12-31

    The purpose of this report is to document progress in the areas of national policy development, emissions reduction, research and education, and adaptation, and to identify specific actions that will be undertaken to implement the Illinois state action plan. The task force has been tracking national and international climate change policy, and helping shape national policy agenda. Identification and implementation of cost-effective mitigation measures has been performed for emissions reduction. In the area of research and education, the task force is developing the capacity to measure climate change indicators, maintaining and enhancing Illinois relevant research, and strengthening climate change education. Activities relevant to adaptation to new policy include strengthening water laws and planning for adaptation. 6 figs., 4 tabs.

  10. protective forces | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    protective forces Design Basis Threat NNSA has taken aggressive action to improve the security of its nuclear weapons material (often referred to as special nuclear material, or SNM) and nuclear weapons in its custody. One major challenge has been, and remains, ensuring that SNM is well protected, while at the same time,... Information Security Information security deals with requirements for the protection and control of information and matter required to be classified or controlled by

  11. CASL - Lift Forces in Bubbly Flows

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lift Forces in Bubbly Flows The dynamics of two-phase (gas/liquid) bubbly flows are complex: bubbles deform and disperse; large latent heats and heat capacity differentials influence local boiling; and relatively small changes in heated surface temperatures yield order of magnitude changes in boiling complexity. Because the local void volume has a direct feedback effect on reactor neutron flux and fuel rod power production, prediction of local boiling rates and bulk boiling effects in nuclear

  12. Departmental Response: SEAB Task Force Recommendations on

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Departmental Response: SEAB Task Force Recommendations on Technology Development for Environmental Management Introduction In May 2014, Energy Secretary Ernest Moniz charged the Secretary of Energy Advisory Board (SEAB) to provide advice as to how the United States (U.S.) Department of Energy (DOE) could more effectively ensure the development of technology necessary for the Office of Environmental Management (EM) to complete its mission, cleanup of legacy waste sites. The SEAB formed a Task

  13. Squeeze bottle apparatus with force multiplying pistons

    DOE Patents [OSTI]

    Moss, Owen R.; Gordon, Norman R.; DeFord, Henry S.; Eschbach, Eugene A.

    1994-01-01

    The present invention comprises a spray bottle in which the pressure resulting from the gripping force applied by the user is amplified and this increased pressure used in generating a spray such as an aerosol or fluid stream. In its preferred embodiment, the invention includes a high pressure chamber and a corresponding piston which is operative for driving fluid out of this chamber at high pressure through a spray nozzle and a low pressure chamber, and a corresponding piston which is acted upon by the hydraulic pressure within the bottle resulting from the gripping force. The low pressure chamber and piston are of larger size than the high pressure chamber and piston. The pistons are rigidly connected so that the force created by the pressure acting on the piston in the low pressure chamber is transmitted to the piston in the high pressure chamber where it is applied over a more limited area, thereby generating greater hydraulic pressure for use in forming the spray.

  14. Manufacturing's Wake-Up Call

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Source: Bureau of Labor Statistics, Booz & Company GDP increases to as much as 25 ... flow, usage of materials and energy, energy conservation, and other components of productivity. ...

  15. Environmental security: Concepts and air force implementation

    SciTech Connect (OSTI)

    Walewski, J.A.

    1995-12-01

    With the end of the Cold War the Department of Defense (DoD) has been reorganized to establish the position of Deputy Under Secretary of Defense for Environmental Security. As a result, the definition of national security has been broadened to include the environment. Environment and protection of the interrelated resources are seen as vital components to the health and welfare of the United States. National security is dependent on environmental security. This paper introduces the role of environmental security as a component of current national security strategy; reviews DoD and the military services role in the domestic legacy of environmental impacts created by the cold war; details the status of current programs and methodologies used to improve environmental performance, compliance with environmental laws, and stewardship activities. Implementation will be demonstrated using Air Force policy, programs and activities underway, and a detailed explanation of Air Force environmental goals and objectives will be highlighted. Lessons learned to date will be covered in addition to future alternative strategies. Military readiness however does not preclude environmental stewardship. Many military lands have become virtual sanctuaries since years of restricted access and activity created islands of diverse ecosystems. Recent survey and inventory work on DoD lands have found some of the most pristine tracts remaining in the country. Consolidation of mission activities through base closure an realignment, and increasing weapon system sophistication, adds additional challenges to comply with environmental laws and regulation. This paper will define these unique environmental challenges, and discuss the methodologies used by the Air Force to fulfill its environmental stewardship role.

  16. [Band electronic structures and crystal packing forces

    SciTech Connect (OSTI)

    Not Available

    1993-01-01

    We investigated the electronic and structural properties of low-dimensional materials and explored the structure-property correlations governing their physical properties. Progress was made on how to interpret the scanning tunneling microscopy and atomic force microscopy images of layered materials and on how to account for charge density wave instabilities in 2-D metals. Materials studied included transition metal chalcogenides, transition metal halides, organic conducting salts, Mo bronzes, A[sub 2]PdH[sub 2], fullerenes, squarate tetrahydrate polymers Fe, Cu(C[sub 4]O[sub 4])4[center dot]H[sub 2]O, BEDT salts, etc.

  17. Stability at low symmetric force levels

    SciTech Connect (OSTI)

    Canavan, G.H.

    1997-09-01

    At low force levels stability indices depend primarily on the number of vulnerable missiles and the number of weapons on them. The index reduces to a product of the number of vulnerable missiles and the differences between normalized second and first strikes by vulnerable weapons. As the number of weapons per vulnerable missile decreases, the index rapidly approaches stability. Further reductions in vulnerable and survivable missiles and weapons do not affect stability, although they do reduce first and second strikes. Modest weapon reconstitution degrades stability significantly.

  18. Color force saturation in nuclear chromodynamics

    SciTech Connect (OSTI)

    Sivers, D.

    1985-01-01

    A simple representation of the Q anti QQ anti Q Green's Function in the strong coupling quenched approximation to lattice QCD is used to illustrate the nature of color force saturation in chromodynamics. The example shows that configuration mixing allows a binding energy of a few MeV in a Q anti QQ anti Q ''molecule'' formed from mesons with mass 1 GeV. In lattice QCD, configuration mixing can be calculated on the same footing with glueball exchange effects by measuring the appropriate operators in a Monte Carlo simulation. 3 refs., 5 figs.

  19. Coke cake behavior under compressive forces

    SciTech Connect (OSTI)

    Watakabe, S.; Takeda, T.; Itaya, H.; Suginobe, H.

    1997-12-31

    The deformation of the coke cake and load on the side wall during pushing were studied using an electric furnace equipped with a movable wall. Coke cake was found to deform in three stages under compressive forces. The coke cake was shortened in the pushing direction in the cake deformation stage, and load was generated on the side walls in the high wall load stage. Secondary cracks in the coke cake were found to prevent load transmission on the wall. The maximum load transmission rate was controlled by adjusting the maximum fluidity and mean reflectance of the blended coal.

  20. Development of Integrated ASR Model Forcing Data and Their Application...

    Office of Scientific and Technical Information (OSTI)

    ARM model forcing data, and (2) used the ARM forcing data to identify systematic biases in clouds and radiation in the CAM5 and design new physical parameterizations to improve it. ...

  1. Radiative Forcing of Climate Change (Book) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Search Results Book: Radiative Forcing of Climate Change Citation Details In-Document Search Title: Radiative Forcing of Climate Change Chapter 6 of the IPCC Third ...

  2. Government and Industry a Force for Collaboration at the Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    A Force for Collaboration at the Energy Roadmap Update Workshop Sept. 16, 2009 Energy ... forces at a workshop to help update the Roadmap to Secure Control Systems in the Energy ...

  3. ARM - Midlatitude Continental Convective Clouds - Single Column Model Forcing (xie-scm_forcing)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Xie, Shaocheng; McCoy, Renata; Zhang, Yunyan

    2012-10-25

    The constrained variational objective analysis approach described in Zhang and Lin [1997] and Zhang et al. [2001]was used to derive the large-scale single-column/cloud resolving model forcing and evaluation data set from the observational data collected during Midlatitude Continental Convective Clouds Experiment (MC3E), which was conducted during April to June 2011 near the ARM Southern Great Plains (SGP) site. The analysis data cover the period from 00Z 22 April - 21Z 6 June 2011. The forcing data represent an average over the 3 different analysis domains centered at central facility with a diameter of 300 km (standard SGP forcing domain size), 150 km and 75 km, as shown in Figure 1. This is to support modeling studies on various-scale convective systems.

  4. Laser interferometry force-feedback sensor for an interfacial force microscope

    DOE Patents [OSTI]

    Houston, Jack E.; Smith, William L.

    2004-04-13

    A scanning force microscope is provided with a force-feedback sensor to increase sensitivity and stability in determining interfacial forces between a probe and a sample. The sensor utilizes an interferometry technique that uses a collimated light beam directed onto a deflecting member, comprising a common plate suspended above capacitor electrodes situated on a substrate forming an interference cavity with a probe on the side of the common plate opposite the side suspended above capacitor electrodes. The probe interacts with the surface of the sample and the intensity of the reflected beam is measured and used to determine the change in displacement of the probe to the sample and to control the probe distance relative to the surface of the sample.

  5. Before the House Armed Services Subcommittee on Strategic Forces |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Armed Services Subcommittee on Strategic Forces Before the House Armed Services Subcommittee on Strategic Forces Before the House Armed Services Subcommittee on Strategic Forces By: Ines Tray, Assistant Secretary Office of Environmental Management Subject: EM FY 2011 Budget Request 3-25-10_Final_Testimony_(Triay).pdf (70.66 KB) More Documents & Publications Assistant Secretary Triay's Written Statement before the House Armed Services Subcommittee on Strategic Forces

  6. Before the Subcommittee on Strategic Forces - House Armed Services

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Committee | Department of Energy Strategic Forces - House Armed Services Committee Before the Subcommittee on Strategic Forces - House Armed Services Committee Testimony of Daniel B. Poneman, Deputy Secretary of Energy Before the Subcommittee on Strategic Forces - House Armed Services Committee 9-13-12_Daniel_Poneman_FT HASC.pdf (293.68 KB) More Documents & Publications Before the Subcommittee on Strategic Forces - House Committee on Armed Services Before the Subcommittee on Strategic

  7. Interagency Energy Management Task Force | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Management Task Force Interagency Energy Management Task Force The Federal Interagency Energy Management Task Force was created by the Federal Energy Management Improvement Act of 1988 to coordinate federal government activities that encourage energy conservation and energy efficiency. Led by the Federal Energy Management Program director and composed of federal energy managers, this task force serves as a forum for: Sharing lessons learned across agencies Providing analysis on technical

  8. Joining Forces to Empower Veterans | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Joining Forces to Empower Veterans Joining Forces to Empower Veterans November 10, 2015 - 11:20am Addthis Joining Forces to Empower Veterans Sarah Wagoner Sarah Wagoner Communications Specialist, Wind and Water Power Technologies Office Through the Energy Department's partnership with the federal Joining Forces campaign, companies from the energy, manufacturing, transportation, and information technology sectors have committed to hiring approximately 90,000 veterans and military spouses through

  9. Collective behaviors of the Casimir force in microelectromechanical systems

    Office of Scientific and Technical Information (OSTI)

    (Technical Report) | SciTech Connect Collective behaviors of the Casimir force in microelectromechanical systems Citation Details In-Document Search Title: Collective behaviors of the Casimir force in microelectromechanical systems Our goal was to explore the strong dependence of the Casimir force on the shape of the interacting bodies. We made significant progress and measured the Casimir force on silicon surface with rectangular corrugation and showed that the results agree with

  10. V.P. Biden Hosts the Middle Class Task Force

    Broader source: Energy.gov [DOE]

    Secretary Chu will join Vice President Biden at the White House as he hosts a Middle Class Task Force event.

  11. Draft Report of the Task Force on Methane Hydrates

    Broader source: Energy.gov [DOE]

    This report presents the findings and recommendations for the Secretary of Energy Advisory Board (SEAB) Task Force on Methane Hydrates.

  12. Annual report on contractor work force restructuring, fiscal year 1997

    SciTech Connect (OSTI)

    1998-03-01

    This report summarizes work force restructuring and community transition activities at all sites. It outlines work force restructuring activity for FY 1997, changing separation patterns, cost savings and separation costs, program assessment, activities to mitigate restructuring impacts, community transition activities, status of displaced workers, lessons learned, and emerging issues in worker and community transition. Work force restructuring and community transition activities for defense nuclear sites are summarized, as are work force restructuring activities at non-defense sites.

  13. GeoVision Study Task Forces | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Study Task Forces GeoVision Study Task Forces The Energy Department's GeoVision Study is undertaking rigorous analysis in seven specific topic areas that are led by team members from our national labs. Each task force will produce a deliverable required by the scope of the project. Task forces will be coordinated by the National Renewable Energy Laboratory. I. Exploration: Lab Lead - Lawrence Berkeley National Laboratory How geothermal resources are identified today Exploration costs and risks

  14. Report of the Task Force on Methane Hydrates

    Broader source: Energy.gov [DOE]

    This report presents the findings and recommendations for the Secretary of Energy Advisory Board (SEAB) Task Force on Methane Hydrates.

  15. Interagency Energy Management Task Force | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    About the Federal Energy Management Program » Interagency Energy Management Task Force Interagency Energy Management Task Force The Federal Interagency Energy Management Task Force was created by the Federal Energy Management Improvement Act of 1988 to coordinate federal government activities that encourage energy conservation and energy efficiency. Led by the Federal Energy Management Program director and composed of federal energy managers, this task force serves as a forum for: Sharing

  16. Design of the IPIRG-2 simulated seismic forcing function

    SciTech Connect (OSTI)

    Olson, R.; Scott, P.; Wilkowski, G.

    1996-02-01

    A series of pipe system experiments was conducted in IPIRG-2 that used a realistic seismic forcing function. Because the seismic forcing function was more complex than the single-frequency increasing-amplitude sinusoidal forcing function used in the IPIRG-1 pipe system experiments, considerable effort went into designing the function. This report documents the design process for the seismic forcing function used in the IPIRG-2 pipe system experiments.

  17. Material fabrication using acoustic radiation forces

    DOE Patents [OSTI]

    Sinha, Naveen N.; Sinha, Dipen N.; Goddard, Gregory Russ

    2015-12-01

    Apparatus and methods for using acoustic radiation forces to order particles suspended in a host liquid are described. The particles may range in size from nanometers to millimeters, and may have any shape. The suspension is placed in an acoustic resonator cavity, and acoustical energy is supplied thereto using acoustic transducers. The resulting pattern may be fixed by using a solidifiable host liquid, forming thereby a solid material. Patterns may be quickly generated; typical times ranging from a few seconds to a few minutes. In a one-dimensional arrangement, parallel layers of particles are formed. With two and three dimensional transducer arrangements, more complex particle configurations are possible since different standing-wave patterns may be generated in the resonator. Fabrication of periodic structures, such as metamaterials, having periods tunable by varying the frequency of the acoustic waves, on surfaces or in bulk volume using acoustic radiation forces, provides great flexibility in the creation of new materials. Periodicities may range from millimeters to sub-micron distances, covering a large portion of the range for optical and acoustical metamaterials.

  18. Nuclear Radiological Threat Task Force Established | National Nuclear

    National Nuclear Security Administration (NNSA)

    Security Administration | (NNSA) Radiological Threat Task Force Established Nuclear Radiological Threat Task Force Established Washington, DC NNSA's Administrator Linton Brooks announces the establishment of the Nuclear Radiological Threat Reduction Task Force (NRTRTF) to combat the threats posed by radiological dispersion devices or "dirty bombs."

  19. CCS Task Force - Executive Summary | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CCS Task Force - Executive Summary CCS Task Force - Executive Summary CCS Task Force - Executive Summary (90.47 KB) More Documents & Publications CCSTF - Final Report Before the Senate Energy and Natural Resources Committee Before the House Science, Space, and Technology Subcommittee on Energy and Environment

  20. A New Method of Comparing Forcing Agents in Climate Models

    SciTech Connect (OSTI)

    Kravitz, Benjamin S.; MacMartin, Douglas; Rasch, Philip J.; Jarvis, Andrew

    2015-10-14

    We describe a new method of comparing different climate forcing agents (e.g., CO2, CH4, and solar irradiance) that avoids many of the ambiguities introduced by temperature-related climate feedbacks. This is achieved by introducing an explicit feedback loop external to the climate model that adjusts one forcing agent to balance another while keeping global mean surface temperature constant. Compared to current approaches, this method has two main advantages: (i) the need to define radiative forcing is bypassed and (ii) by maintaining roughly constant global mean temperature, the effects of state dependence on internal feedback strengths are minimized. We demonstrate this approach for several different forcing agents and derive the relationships between these forcing agents in two climate models; comparisons between forcing agents are highly linear in concordance with predicted functional forms. Transitivity of the relationships between the forcing agents appears to hold within a wide range of forcing. The relationships between the forcing agents obtained from this method are consistent across both models but differ from relationships that would be obtained from calculations of radiative forcing, highlighting the importance of controlling for surface temperature feedback effects when separating radiative forcing and climate response.

  1. Costs of strikes between vulnerable missile forces

    SciTech Connect (OSTI)

    Canavan, G.H.

    1997-02-01

    This note derives the first and second strike magnitudes and costs for strikes between vulnerable missile forces with multiple warheads. The extension to mixes with invulnerable missiles is performed in a companion note. Stability increases as the number of weapons per missile is reduced. The optimal allocation of weapons between missiles and value is significant in predicting the stability impact of the reduction of the number of weapons per missile at large numbers of missiles, less significant in reducing the number of missiles for fixed weapons per missile. At low numbers of missiles, the stability indices for singlet and triplet configurations are comparable, as are the number of weapons each would deliver on value targets.

  2. Forcing continuous reconnection in hybrid simulations

    SciTech Connect (OSTI)

    Laitinen, T. V. Janhunen, P.; Jarvinen, R.; Kallio, E.

    2014-07-15

    We have performed hybrid simulations of driven continuous reconnection with open boundary conditions. Reconnection is started by a collision of two subsonic plasma fronts with opposite magnetic fields, without any specified magnetic field configuration as initial condition. Due to continued forced plasma inflow, a current sheet co-located with a dense and hot plasma sheet develops. The translational symmetry of the current sheet is broken by applying a spatial gradient in the inflow speed. We compare runs with and without localized resistivity: reconnection is initiated in both cases, but localized resistivity stabilizes it and enhances its efficiency. The outflow speed reaches about half of Alfvn speed. We quantify the conversion of magnetic energy to kinetic energy of protons and to Joule heating and show that with localized resistivity, kinetic energy of protons is increased on average five-fold in the reconnection in our simulation case.

  3. Information-based physics, influence, and forces

    SciTech Connect (OSTI)

    Walsh, James Lyons; Knuth, Kevin H.

    2015-01-13

    In recent works, Knuth and Bahreyni have demonstrated that the concepts of space and time are emergent in a coarse-grained model of direct particle-particle influence. In addition, Knuth demonstrated that observer-made inferences regarding the free particle, which is defined as a particle that influences others, but is not itself influenced, result in a situation identical to the Feynman checkerboard model of the Dirac equation. This suggests that the same theoretical framework that gives rise to an emergent spacetime is consistent with quantum mechanics. In this paper, we begin to explore the effect of influence on the emergent properties of a particle. This initial study suggests that when a particle is influenced, it is interpreted as accelerating in a manner consistent with special relativity implying that, at least in this situation, influence can be conceived of as a force.

  4. Total aerosol effect: forcing or radiative flux perturbation?

    SciTech Connect (OSTI)

    Lohmann, Ulrike; Storelvmo, Trude; Jones, Andy; Rotstayn, Leon; Menon, Surabi; Quaas, Johannes; Ekman, Annica; Koch, Dorothy; Ruedy, Reto

    2009-09-25

    Uncertainties in aerosol forcings, especially those associated with clouds, contribute to a large extent to uncertainties in the total anthropogenic forcing. The interaction of aerosols with clouds and radiation introduces feedbacks which can affect the rate of rain formation. Traditionally these feedbacks were not included in estimates of total aerosol forcing. Here we argue that they should be included because these feedbacks act quickly compared with the time scale of global warming. We show that for different forcing agents (aerosols and greenhouse gases) the radiative forcings as traditionally defined agree rather well with estimates from a method, here referred to as radiative flux perturbations (RFP), that takes these fast feedbacks and interactions into account. Thus we propose replacing the direct and indirect aerosol forcing in the IPCC forcing chart with RFP estimates. This implies that it is better to evaluate the total anthropogenic aerosol effect as a whole.

  5. U.S. - Canada Power System Outage Task Force: Final Report on...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    - Canada Power System Outage Task Force: Final Report on the Implementation of Task Force Recommendations U.S. - Canada Power System Outage Task Force: Final Report on the ...

  6. Work_Force_Restructuring_Activities_December_10_2008.pdf | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    WorkForceRestructuringActivitiesDecember102008.pdf WorkForceRestructuringActivitiesDecember102008.pdf PDF icon WorkForceRestructuringActivitiesDecember102008.pdf ...

  7. Unforced, Forced and Resonance-Forced Waves in a Spherical Atmosphere

    SciTech Connect (OSTI)

    Covey, Curt

    2015-10-27

    This technical report discusses a longstanding issue of atmospheric tides in weather-prediction and general circulation models (GCMs). Tidal signatures consistent with observations have appeared in the surface pressure output of GCMs since their inception (Hardy 1968, Hunt and Manabe 1968). Such models, however, are sufficiently complicated that the possibility of “getting the right answer for the wrong reasons” arises. Lindzen et al. (1968, hereafter LBK) showed that wave reflection at the upper boundary of a GCM can artificially enhance the tides. Covey et al. (2011, 2014) found that tidal output from a number of modern GCMs is surprisingly independent of their forcing. This finding is consistent with earlier suggestions that a compensating effect occurs in some models: lowering the model top reduces the forcing (solar heating of the ozone layer) but also enhances spurious wave reflection (Zwiers and Hamilton 1986, Hamilton et al. 2008).

  8. High-speed adaptive contact-mode atomic force microscopy imaging with near-minimum-force

    SciTech Connect (OSTI)

    Ren, Juan; Zou, Qingze

    2014-07-15

    In this paper, an adaptive contact-mode imaging approach is proposed to replace the traditional contact-mode imaging by addressing the major concerns in both the speed and the force exerted to the sample. The speed of the traditional contact-mode imaging is largely limited by the need to maintain precision tracking of the sample topography over the entire imaged sample surface, while large image distortion and excessive probe-sample interaction force occur during high-speed imaging. In this work, first, the image distortion caused by the topography tracking error is accounted for in the topography quantification. Second, the quantified sample topography is utilized in a gradient-based optimization method to adjust the cantilever deflection set-point for each scanline closely around the minimal level needed for maintaining stable probe-sample contact, and a data-driven iterative feedforward control that utilizes a prediction of the next-line topography is integrated to the topography feeedback loop to enhance the sample topography tracking. The proposed approach is demonstrated and evaluated through imaging a calibration sample of square pitches at both high speeds (e.g., scan rate of 75 Hz and 130 Hz) and large sizes (e.g., scan size of 30 ?m and 80??m). The experimental results show that compared to the traditional constant-force contact-mode imaging, the imaging speed can be increased by over 30 folds (with the scanning speed at 13 mm/s), and the probe-sample interaction force can be reduced by more than 15% while maintaining the same image quality.

  9. Full information acquisition in piezoresponse force microscopy

    SciTech Connect (OSTI)

    Somnath, Suhas; Belianinov, Alex; Jesse, Stephen; Kalinin, Sergei V.

    2015-12-28

    The information flow from the tip-surface junction to the detector electronics during the piezoresponse force microscopy (PFM) imaging is explored using the recently developed general mode (G-mode) detection. Information-theory analysis suggests that G-mode PFM in the non-switching regime, close to the first resonance mode, contains a relatively small (100 - 150) number of components containing significant information. The first two primary components are similar to classical PFM images, suggesting that classical lock-in detection schemes provide high veracity information in this case. At the same time, a number of transient components exhibit contrast associated with surface topography, suggesting pathway to separate the two. The number of significant components increases considerably in the non-linear and switching regimes and approaching to cantilever resonances, precluding the use of classical lock-in detection and necessitating the use of band excitation or G-mode detection schemes. As a result, the future prospects of full information imaging in SPM are discussed.

  10. Full information acquisition in piezoresponse force microscopy

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Somnath, Suhas; Belianinov, Alex; Jesse, Stephen; Kalinin, Sergei V.

    2015-12-28

    The information flow from the tip-surface junction to the detector electronics during the piezoresponse force microscopy (PFM) imaging is explored using the recently developed general mode (G-mode) detection. Information-theory analysis suggests that G-mode PFM in the non-switching regime, close to the first resonance mode, contains a relatively small (100 - 150) number of components containing significant information. The first two primary components are similar to classical PFM images, suggesting that classical lock-in detection schemes provide high veracity information in this case. At the same time, a number of transient components exhibit contrast associated with surface topography, suggesting pathway to separatemore » the two. The number of significant components increases considerably in the non-linear and switching regimes and approaching to cantilever resonances, precluding the use of classical lock-in detection and necessitating the use of band excitation or G-mode detection schemes. As a result, the future prospects of full information imaging in SPM are discussed.« less

  11. Multi-range force sensors utilizing shape memory alloys

    DOE Patents [OSTI]

    Varma, Venugopal K.

    2003-04-15

    The present invention provides a multi-range force sensor comprising a load cell made of a shape memory alloy, a strain sensing system, a temperature modulating system, and a temperature monitoring system. The ability of the force sensor to measure contact forces in multiple ranges is effected by the change in temperature of the shape memory alloy. The heating and cooling system functions to place the shape memory alloy of the load cell in either a low temperature, low strength phase for measuring small contact forces, or a high temperature, high strength phase for measuring large contact forces. Once the load cell is in the desired phase, the strain sensing system is utilized to obtain the applied contact force. The temperature monitoring system is utilized to ensure that the shape memory alloy is in one phase or the other.

  12. Task Force on Biofuels Infrastructure | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Task Force on Biofuels Infrastructure Task Force on Biofuels Infrastructure Under the federal Renewable Fuels Standard (RFS) adopted in 2005 and amended in 2007, the United States is committed to a substantial (five-fold) increase in its use of biofuels by 2022. The National Commission on Energy Policy (NCEP) convened a Biofuels Infrastructure Task Force in 2008 to examine the infrastructure implications of this relatively swift and unprecedented shift in the composition of the nation's

  13. Observed Aerosol Radiative Forcings: Comparison for Natural and Anthropogenic Sources

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Aerosol Radiative Forcings: Comparison for Natural and Anthropogenic Sources A. M. Vogelmann Center for Atmospheric Sciences and Center for Clouds, Chemistry and Climate Scripps Institution of Oceanography University of California San Diego, California Introduction The modeling of radiative forcing, and aerosol radiative forcing in particular, is one of the largest uncertainties in predicting climate change (Hansen et al. 1998). Addressing this uncertainty first requires an accurate

  14. Casimir Forces On A Silicon Micromechanical Chip (Journal Article) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Journal Article: Casimir Forces On A Silicon Micromechanical Chip Citation Details In-Document Search Title: Casimir Forces On A Silicon Micromechanical Chip Quantum fluctuations give rise to van der Waals and Casimir forces that dominate the interaction between electrically neutral objects at sub-micron separations. Under the trend of miniaturization, such quantum electrodynamical effects are expected to play an important role in micro- and nano-mechanical devices.

  15. Renewable Hydrogen Production at Hickam Air Force Base | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy at Hickam Air Force Base Renewable Hydrogen Production at Hickam Air Force Base Presented at the Renewable Hydrogen Workshop, Nov. 16, 2009, in Palm Springs, CA renewable_hydrogen_workshop_nov16_quinn.pdf (920.39 KB) More Documents & Publications Hickam Air Force Base Fuel Cell Vehicles: Early Implementation Experience Fuel Cell Hybrid Bus Lands at Hickam AFB: Hydrogen Fuel Cell & Infrastructure Technologies Program, Fuel Cell Bus Demonstration Project (Fact Sheet) Hawaii

  16. Federal Task Force Sends Recommendations to President on Fostering Clean

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Coal Technology | Department of Energy Task Force Sends Recommendations to President on Fostering Clean Coal Technology Federal Task Force Sends Recommendations to President on Fostering Clean Coal Technology August 12, 2010 - 12:00am Addthis WASHINGTON - President Obama's Interagency Task Force on Carbon Capture and Storage (CCS), co-chaired by the U.S. Environmental Protection Agency (EPA) and the Department of Energy (DOE), delivered a series of recommendations to the president today on

  17. Before the House Armed Services Subcommittee on Strategic Forces |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Armed Services Subcommittee on Strategic Forces Before the House Armed Services Subcommittee on Strategic Forces Before the House Armed Services Subcommittee on Strategic Forces By: Glenn Podonsky, Chief Health, Safety and Security Officer Subject: FY 2010 Budget Request 5_13_09_HSS_Fin_Testimony.pdf (109.5 KB) More Documents & Publications USW Health Safety and Environment Conference - HSS Workshop Department of Energy Office of Health, Safety and Security(HSS)

  18. Before the Subcommittee on Strategic Forces - House Committee on Armed

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services | Department of Energy Committee on Armed Services Before the Subcommittee on Strategic Forces - House Committee on Armed Services Testimony of Daniel B. Poneman, Deputy Secretary of Energy Before the Subcommittee on Strategic Forces - House Committee on Armed Services 2-28-13_Daniel_Poneman FT HAS.pdf (134.4 KB) More Documents & Publications Before the Subcommittee on Strategic Forces - House Armed Services Committee

  19. Protective Force Protocols for ESS Supported Performance Tests and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Exercises, March 12, 2007 | Department of Energy Protective Force Protocols for ESS Supported Performance Tests and Exercises, March 12, 2007 Protective Force Protocols for ESS Supported Performance Tests and Exercises, March 12, 2007 March 12, 2008 The DOE/NNSA has an established process for determining the effectiveness of a site's overall protection system, and a vital part of this process is the use of performance testing. This document - Protective Force Protocols for Engagement

  20. Fuel Cell Companies Commit to Hiring Veterans Through Joining Forces

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Initiative | Department of Energy Companies Commit to Hiring Veterans Through Joining Forces Initiative Fuel Cell Companies Commit to Hiring Veterans Through Joining Forces Initiative May 9, 2016 - 11:55am Addthis First Lady Michelle Obama and representatives of the fuel cell company, PDC Machines. The April event announced new private-sector commitments to train or hire 90,000 veterans and military spouses through the Joining Forces Initiative. Two Fuel Cell Technologies Office-supported

  1. Gregory H. Friedman: Before the Subcommittee on Strategic Forces Committee

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    on Armed Services U.S. House of Representatives | Department of Energy Strategic Forces Committee on Armed Services U.S. House of Representatives Gregory H. Friedman: Before the Subcommittee on Strategic Forces Committee on Armed Services U.S. House of Representatives February 28, 2013 Before the Subcommittee on Strategic Forces Committee on Armed Services U.S. House of Representatives Statement of Gregory H. Friedman, Inspector General, Department of Energy Mr. Chairman and Members of the

  2. Microsoft Word - Energy Code Enforcement Funding Task Force - Fact Sheet

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    [Final].docx | Department of Energy Energy Code Enforcement Funding Task Force - Fact Sheet [Final].docx Microsoft Word - Energy Code Enforcement Funding Task Force - Fact Sheet [Final].docx Microsoft Word - Energy Code Enforcement Funding Task Force - Fact Sheet [Final].docx (221.19 KB) More Documents & Publications Sonoma County Solar Implementation Plan Final Report - Grow Solar Wisconsin Team Energy Industry Days Additional Information

  3. University Research Reactor Task Force to the Nuclear Energy Research

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advisory Committee | Department of Energy University Research Reactor Task Force to the Nuclear Energy Research Advisory Committee University Research Reactor Task Force to the Nuclear Energy Research Advisory Committee In mid-February, 2001 The University Research Reactor (URR) Task Force (TF), a sub-group of the Department of Energy (DOE) Nuclear Energy Research Advisory Committee (NERAC), was asked to: * Analyze information collected by DOE, the NERAC "Blue Ribbon Panel,"

  4. Collaborative Utility Task Force Partners with DOE to Develop Cyber

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Security Requirements for Advanced Metering Infrastructure | Department of Energy Collaborative Utility Task Force Partners with DOE to Develop Cyber Security Requirements for Advanced Metering Infrastructure Collaborative Utility Task Force Partners with DOE to Develop Cyber Security Requirements for Advanced Metering Infrastructure The Advanced Metering Infrastructure Security (AMI-SEC) Task Force announces the release of the AMI System Security Requirements, a first-of-its-kind for the

  5. Air Force Announces Funding for Alternative Energy Research & Development

    Broader source: Energy.gov [DOE]

    The Air Force Research Laboratory (AFRL) has released a Broad Area Announcement (BAA) for over $25 million for Alternative Energy Research & Development.

  6. Before the Subcommittee on Strategic Forces - House Armed Services...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Armed Services Committee Before the Subcommittee on Strategic Forces - House Armed Services Committee Testimony of Daniel B. Poneman, Deputy Secretary of Energy Before the ...

  7. Hickam Air Force Base Fuel Cell Vehicles: Early Implementation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technical Report NRELTP-560-42233 October 2007 Hickam Air Force Base Fuel Cell Vehicles: Early Implementation Experience Leslie Eudy, National Renewable Energy Laboratory Kevin ...

  8. NPT Enters Into Force | National Nuclear Security Administration | (NNSA)

    National Nuclear Security Administration (NNSA)

    NPT Enters Into Force New York, United States The Treaty on the Non-Proliferation of Nuclear Weapons (NPT) goes into effect

  9. Air Force Civil Engineer Support Agency | Open Energy Information

    Open Energy Info (EERE)

    Civil Engineer Support Agency Jump to: navigation, search Name: Air Force Civil Engineer Support Agency Place: Florida Zip: 32403-5319 Sector: Renewable Energy Product:...

  10. Hydropower Vision Task Force Charter | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PDF icon Hydropower Vision Task Force Charter.pdf More Documents & Publications State Energy Advisory Board November 2011 Meeting Guide to Community Energy Strategic Planning State ...

  11. Ultrasonic-Based Mode-Synthesizing Atomic Force Microscopy -...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Only ultrasonic-based atomic force microscopy in the industry Sufficiently flexible for compatibility with spectroscopic approaches such as Raman spectroscopy Easily adaptable to ...

  12. A systematic fitting procedure for accurate force field models...

    Office of Scientific and Technical Information (OSTI)

    A systematic fitting procedure for accurate force field models to reproduce ab initio phonon spectra of nanostructures This content will become publicly available on January 31, ...

  13. Air Force Achieves Fuel Efficiency through Industry Best Practices |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Force Achieves Fuel Efficiency through Industry Best Practices Air Force Achieves Fuel Efficiency through Industry Best Practices Fact sheet offers an overview of the U.S. Air Force's fuel-efficiency program. af_fuelefficiency.pdf (939.66 KB) More Documents & Publications U.S. Air Force Energy Program Presentation National Clean Fleets Partnership Fact Sheet and Progress Update Report of the DOE-DOE Workshop on Fuel Cells in Aviation: Workshop Summary and Action Plan

  14. Temperature evolution of electromotive force from Pt on yttrium...

    Office of Scientific and Technical Information (OSTI)

    Temperature evolution of electromotive force from Pt on yttrium-iron-garnet under ferromagnetic resonance Citation Details In-Document Search Title: Temperature evolution of ...

  15. Nuclear Forces from Lattice Quantum Chromodynamics Martin J....

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Forces from Lattice Quantum Chromodynamics Martin J. Savage Institute for Nuclear Theory Large Scale Computing and Storage Requirements for Nuclear Physics (NP): Target 2017 April ...

  16. Nuclear Forces and High-Performance Computing: The Perfect Match...

    Office of Scientific and Technical Information (OSTI)

    DOE Contract Number: W-7405-ENG-48 Resource Type: Conference ... ELEMENTARY PARTICLES AND FIELDS; GLUONS; NUCLEAR FORCES; NUCLEAR PHYSICS; QUANTUM CHROMODYNAMICS; QUANTUM FIELD THEORY...

  17. An ensemble constrained variational analysis of atmospheric forcing...

    Office of Scientific and Technical Information (OSTI)

    An ensemble constrained variational analysis of atmospheric forcing data and its application to evaluate clouds in CAM5: Ensemble 3DCVA and Its Application Prev Next Title: ...

  18. A Nanocrystal Sensor for Luminescence Detection of Cellular Forces...

    Office of Scientific and Technical Information (OSTI)

    States Language: English Subject: 77 NANOSCIENCE AND NANOTECHNOLOGY; 47 OTHER INSTRUMENTATION tetrapod stress gauge, luminescent nanocrystals, cellular forces Word Cloud More...

  19. Phase contrast and operation regimes in multifrequency atomic force microscopy

    SciTech Connect (OSTI)

    Santos, Sergio

    2014-04-07

    In amplitude modulation atomic force microscopy the attractive and the repulsive force regimes induce phase shifts above and below 90°, respectively. In the more recent multifrequency approach, however, multiple operation regimes have been reported and the theory should be revisited. Here, a theory of phase contrast in multifrequency atomic force microscopy is developed and discussed in terms of energy transfer between modes, energy dissipation and the kinetic energy and energy transfer associated with externally driven harmonics. The single frequency virial that controls the phase shift might undergo transitions in sign while the average force (modal virial) remains positive (negative)

  20. Before the Senate Armed Services Subcommittee on Strategic Forces

    Broader source: Energy.gov [DOE]

    Subject: DOE Protective Forces' Personnel System Issues By: Glenn Podonsky, Chief Health, Safety and Security Officer Office of Health, Safety and Security

  1. Influence of surface potential on the adhesive force of radioactive...

    Office of Scientific and Technical Information (OSTI)

    of radioactive gold surfaces Citation Details In-Document Search Title: Influence of surface potential on the adhesive force of radioactive gold surfaces Authors: Kweon, Hyojin ...

  2. Before the Subcommittee on Strategic Forces - House Committee...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Committee on Armed Services Before the Subcommittee on Strategic Forces - House Committee on Armed Services Testimony of Daniel B. Poneman, Deputy Secretary of Energy Before the ...

  3. Experimental characterization of edge force on the Crookes radiometer

    SciTech Connect (OSTI)

    Ventura, Austin L.; Ketsdever, Andrew D.; Gimelshein, Natalia E.; Gimelshein, Sergey F.

    2014-12-09

    The contribution of edge force on the Crookes radiometer is experimentally investigated with three vane geometries. This work examines increasing the force per unit weight of a radiometer vane for applications such as near-space propulsion by increasing the vanes perimeter while decreasing the total surface area of the vane by means of machined holes in the vanes. Experimental results are given for three vane geometries. These results indicate that although force to vane weight ratios can be improved, the maximum force is achieved by a vane geometry that contains no hole features.

  4. Interagency Task Force Report on Agency Recommendations, Conditions...

    Open Energy Info (EERE)

    Agriculture, Environmental Protection Agency, Advisory Council on Historic Preservation (Work Group on the Coordination of Federal Mandates). 2001. Interagency Task Force Report...

  5. A measurable force driven by an excitonic condensate

    SciTech Connect (OSTI)

    Hakio?lu, T.; zgn, Ege; Gnay, Mehmet

    2014-04-21

    Free energy signatures related to the measurement of an emergent force (?10{sup ?9}N) due to the exciton condensate (EC) in Double Quantum Wells are predicted and experiments are proposed to measure the effects. The EC-force is attractive and reminiscent of the Casimir force between two perfect metallic plates, but also distinctively different from it by its driving mechanism and dependence on the parameters of the condensate. The proposed experiments are based on a recent experimental work on a driven micromechanical oscillator. Conclusive observations of EC in recent experiments also provide a strong promise for the observation of the EC-force.

  6. Mechanism of force mode dip-pen nanolithography

    SciTech Connect (OSTI)

    Yang, Haijun E-mail: swguo@sjtu.edu.cn; Xie, Hui; Rong, Weibin; Sun, Lining; Wu, Haixia; Guo, Shouwu E-mail: swguo@sjtu.edu.cn

    2014-05-07

    In this work, the underlying mechanism of the force mode dip-pen nanolithography (FMDPN) is investigated in depth by analyzing force curves, tapping mode deflection signals, and Z-scan voltage variations during the FMDPN. The operation parameters including the relative trigger threshold and surface delay parameters are vital to control the loading force and dwell time for ink deposition during FMDPN. A model is also developed to simulate the interactions between the atomic force microscope tip and soft substrate during FMDPN, and verified by its good performance in fitting our experimental data.

  7. Uranyl-Peroxide Nanocapsules in Aqueous Solution: Force Field...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Uranyl-Peroxide Nanocapsules in Aqueous Solution: Force Field Development and First Applications Previous Next List Pere Mir, Bess Vlaisavljevich, Allison L. Dzubak, Shuxian Hu,...

  8. Sandia Energy - New Mexico Renewable Energy Storage Task Force

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Renewable Energy Storage Task Force Home Infrastructure Security Renewable Energy Energy Partnership News News & Events Energy Storage Systems Energy Storage New Mexico Renewable...

  9. Before the Subcommittee on Strategic Forces - House Armed Services...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Written Statement by David Huizenga, Senior Advisor for Environmental Management For the Subcommittee on Strategic Forces - House Armed Services Committee PDF icon 5-9-13David...

  10. An ensemble constrained variational analysis of atmospheric forcing...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: An ensemble constrained variational analysis of atmospheric forcing data and its application to evaluate clouds in CAM5: Ensemble 3DCVA and Its Application ...

  11. Hickam Air Force Base Fuel Cell Vehicles: Early Implementation Experience

    Office of Energy Efficiency and Renewable Energy (EERE)

    This report sumarizes early implementation experience from an evaluation of two prototype fuel cell vehicles operating at Hickam Air Force Base in Honolulu, Hawaii.

  12. Half-harmonic Kelvin probe force microscopy with transfer function...

    Office of Scientific and Technical Information (OSTI)

    Using linear and half-harmonic BE enables quantitative correction of the cantilever transfer function. Half-harmonic band excitation Kelvin probe force microscopy (HBE KPFM) thus ...

  13. Hickam Air Force Base Fuel Cell Vehicles: Early Implementation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Renewable Hydrogen Production at Hickam Air Force Base Hydrogen and Fuel Cell Transit Bus Evaluations: Joint Evaluation Plan for the U.S. Department ...

  14. The Transient Circulation Response to Radiative Forcings and...

    Office of Scientific and Technical Information (OSTI)

    Using ensembles of 90-day climate model simulations with immediate switch-on forcings, including perturbed greenhouse gas concentrations, stratospheric ozone concentrations, and ...

  15. Comprehensive Energy Program at Patrick Air Force Base Set to...

    Office of Environmental Management (EM)

    Download the Patrick Air Force Base case study. (709.94 KB) More Documents & Publications FPL Energy Services ESCO Qualification Sheet UESC Project Overview: NASA Ames Research ...

  16. Forces in bolted joints: analysis methods and test results utilized...

    Office of Scientific and Technical Information (OSTI)

    nuclear core applications (LWBR Development Program) Citation Details In-Document Search Title: Forces in bolted joints: analysis methods and test results utilized for nuclear ...

  17. Time-Localization of Forced Oscillations in Power Systems

    SciTech Connect (OSTI)

    Follum, James D.; Pierre, John W.

    2015-07-26

    In power systems forced oscillations occur, and identification of these oscillations is important for the proper operation of the system. Two of the parameters of interest in analyzing and addressing forced oscillations are the starting and ending points. To obtain estimates of these parameters, this paper proposes a time-localization algorithm based on the geometric analysis of the sample cross-correlation between the measured data and a complex sinusoid at the frequency of the forced oscillation. Results from simulated and measured synchrophasor data demonstrate the algorithm's ability to accurately estimate the starting and ending points of forced oscillations.

  18. Transmission Services WIST Task Force Dynamic Transfer Capability...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ("WIST"), a Task Force of technical staff primarily from Northwest and California transmission providers and sub-regional entities, completed a report documenting Phase 1 of its...

  19. Before the Senate Subcommittee on Strategic Forces - Committee...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the Senate Subcommittee on Strategic Forces - Committee on Armed Services Testimony of James Ownedoff, Acting Principal Deputy Assistant Secretary for Environmental Management...

  20. Report of the Task Force on Statewide Transmission Siting and...

    Open Energy Info (EERE)

    the Task Force on Statewide Transmission Siting and Permitting (Colorado). NA: Colorado Public Utilities Commission. Retrieved from "http:en.openei.orgwindex.php?titleReport...

  1. Before the Subcommittee on Strategic Forces - House Armed Services...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    - House Armed Services Committee Before the Subcommittee on Strategic Forces - House Armed Services Committee Testimony of Daniel B. Poneman, Deputy Secretary of Energy Before the ...

  2. Memorandum, Protective Force Career Options Committee- July 23, 2009

    Broader source: Energy.gov [DOE]

    On March 31,2009, this office commissioned a study to examine career opportunities and retirement options for the Department of Energy (DOE) protective force members.

  3. Pantex Protective Force hailed as "well prepared, well trained...

    National Nuclear Security Administration (NNSA)

    The Pantex Plant recently hosted the U.S. Department of Energy's Office of Enterprise ... inspection. Related Topics pantex Pantex Plant protective force security Related News ...

  4. Efficient Determination of Accurate Force Fields for Porous Material...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Efficient Determination of Accurate Force Fields for Porous Material Using ab Initio Total Energy Calculations Previous Next List Jihan Kim, Li-Chiang Lin, Kyuho Lee, Jeffrey B. ...

  5. Mapping power-law rheology of living cells using multi-frequency force modulation atomic force microscopy

    SciTech Connect (OSTI)

    Takahashi, Ryosuke; Okajima, Takaharu

    2015-10-26

    We present multi-frequency force modulation atomic force microscopy (AFM) for mapping the complex shear modulus G* of living cells as a function of frequency over the range of 50–500 Hz in the same measurement time as the single-frequency force modulation measurement. The AFM technique enables us to reconstruct image maps of rheological parameters, which exhibit a frequency-dependent power-law behavior with respect to G{sup *}. These quantitative rheological measurements reveal a large spatial variation in G* in this frequency range for single cells. Moreover, we find that the reconstructed images of the power-law rheological parameters are much different from those obtained in force-curve or single-frequency force modulation measurements. This indicates that the former provide information about intracellular mechanical structures of the cells that are usually not resolved with the conventional force measurement methods.

  6. Motor vehicle output and GDP, 1968-2007.

    SciTech Connect (OSTI)

    Santini, D. J.; Poyer, D. A.

    2008-01-01

    In this paper, we assess the performance of the BEA series 'value of motor vehicle output' as an indicator of the business cycle over the period 1968-2007. We statistically assess the causal relationship between real motor vehicle output (RMVO) and real gross domestic product (RGDP). This is accomplished by standard estimation and statistical methods used to assess vector autoregressive models. This assessment represents the initial results of a more encompassing research project, the intent of which is to determine the dynamic interaction of the transport sector with the overall economy. It's a start to a more comprehensive assessment of how transport and economic activity interrelate.

  7. Wavenumber Locking And Pattern Formation In Spatially Forced Systems

    SciTech Connect (OSTI)

    Hagberg, Aric; Meron, Ehud; Manor, Rotem

    2008-01-01

    We study wavenumber locking and pattern formation resulting from weak spatially periodic one-dimensional forcing of two-dimensional systems. We consider systems that support stationary or traveling stripe patterns in the absence of the forcing, and assume that the one-dimensional forcing is aligned with the direction of the stripe patterns. When the forcing wavenumber is about twice as large as the wavenumber of the unforced system we find that the forcing can either select or stabilize a resonant stripe solution at half the forcing wavenumber, or create a new resonant solution. When the wavenumber mismatch is high we find that the wave-vector component of the pattern in the direction of the forcing can stilI lock at half the forcing wavenumber, but a wave-vector component in the orthogonal direction develops to compensate for the total wavenumber. As a result stationary two-dimensional rectangular and oblique patterns form. When the unforced system supports traveling waves resonant rectangular patterns remain stationary but the oblique patterns travel in a direction orthogonal to the traveling-waves.

  8. Forces and moments on a slender, cavitating body

    SciTech Connect (OSTI)

    Hailey, C.E.; Clark, E.L.; Buffington, R.J.

    1988-01-01

    Recently a numerical code has been developed at Sandia National Laboratories to predict the pitching moment, normal force, and axial force of a slender, supercavitating shape. The potential flow about the body and cavity is calculated using an axial distribution of source/sink elements. The cavity surface is assumed to be a constant pressure streamline, extending beyond the base of the model. Slender body approximation is used to model the crossflow for small angles of attack. A significant extension of previous work in cavitation flow is the inclusion of laminar and turbulent boundary layer solutions on the body. Predictions with this code, for axial force at zero angle of attack, show good agreement with experiments. There are virtually no published data availble with which to benchmark the pitching moment and normal force predictions. An experiment was designed to measure forces and moments on a supercavitation shape. The primary reason for the test was to obtain much needed data to benchmark the hydrodynamic force and moment predictions. Since the numerical prediction is for super cavitating shapes at very small cavitation numbers, the experiment was designed to be a ventilated cavity test. This paper describes the experimental procedure used to measure the pitching moment, axial and normal forces, and base pressure on a slender body with a ventilated cavity. Limited results are presented for pitching moment and normal force. 5 refs., 7 figs.

  9. Amplification and reversal of Knudsen force by thermoelectric heating

    SciTech Connect (OSTI)

    O'Neill, William J.; Wada, Mizuki; Strongrich, Andrew D.; Cofer, Anthony; Alexeenko, Alina A.

    2014-12-09

    We show that the Knudsen thermal force generated by a thermally-induced flow over a heated beam near a colder wall could be amplified significantly by thermoelectric heating. Bidirectional actuation is achieved by switching the polarity of the thermoelectric device bias voltage. The measurements of the resulting thermal forces at different rarefaction regimes, realized by changing geometry and gas pressure, are done using torsional microbalance. The repulsive or attractive forces between a thermoelectrically heated or cooled plate and a substrate are shown to be up to an order of magnitude larger than for previously studied configurations and heating methods due to favorable coupling of two thermal gradients. The amplification and reversal of the Knudsen force is confirmed by numerical solution of the Boltzmann-ESBGK kinetic model equation. Because of the favorable scaling with decreasing system size, the Knudsen force with thermoelectric heating offers a novel actuation and sensing mechanism for nano/microsystems.

  10. Gauge and averaging in gravitational self-force

    SciTech Connect (OSTI)

    Gralla, Samuel E.

    2011-10-15

    A difficulty with previous treatments of the gravitational self-force is that an explicit formula for the force is available only in a particular gauge (Lorenz gauge), where the force in other gauges must be found through a transformation law once the Lorenz-gauge force is known. For a class of gauges satisfying a 'parity condition' ensuring that the Hamiltonian center of mass of the particle is well-defined, I show that the gravitational self-force is always given by the angle average of the bare gravitational force. To derive this result I replace the computational strategy of previous work with a new approach, wherein the form of the force is first fixed up to a gauge-invariant piece by simple manipulations, and then that piece is determined by working in a gauge designed specifically to simplify the computation. This offers significant computational savings over the Lorenz gauge, since the Hadamard expansion is avoided entirely and the metric perturbation takes a very simple form. I also show that the rest mass of the particle does not evolve due to first-order self-force effects. Finally, I consider the 'mode sum regularization' scheme for computing the self-force in black hole background spacetimes, and use the angle-average form of the force to show that the same mode-by-mode subtraction may be performed in all parity-regular gauges. It appears plausible that suitably modified versions of the Regge-Wheeler and radiation gauges (convenient to Schwarzschild and Kerr, respectively) are in this class.

  11. Note: A rigid piezo motor with large output force and an effective method to reduce sliding friction force

    SciTech Connect (OSTI)

    Guo, Ying; Lu, Qingyou; Hou, Yubin

    2014-05-15

    We present a completely practical TunaDrive piezo motor. It consists of a central piezo stack sandwiched by two arm piezo stacks and two leg piezo stacks, respectively, which is then sandwiched and spring-clamped by a pair of parallel polished sapphire rods. It works by alternatively fast expanding and contracting the arm/leg stacks while slowly expanding/contracting the central stack simultaneously. The key point is that sufficiently fast expanding and contracting a limb stack can make its two sliding friction forces well cancel, resulting in the total sliding friction force is <10% of the total static friction force, which can help increase output force greatly. The piezo motor's high compactness, precision, and output force make it perfect in building a high-quality harsh-condition (vibration resistant) atomic resolution scanning probe microscope.

  12. Local nonlinear rf forces in inhomogeneous magnetized plasmas

    SciTech Connect (OSTI)

    Chen, Jiale; Gao, Zhe

    2014-06-15

    The local nonlinear forces induced by radio frequency (rf) waves are derived in inhomogeneous magnetized plasmas, where the inhomogeneity exists in the rf fields, in the static magnetic field as well as in the equilibrium density and temperature. The local parallel force is completely resonant, but a novel component dependent on those inhomogeneities is obtained as the result of the inhomogeneous transport of parallel resonant-absorbed momentum by the nonlinear perpendicular drift flux. In the local poloidal force, the component induced by the inhomogeneity of rf power absorption is also confirmed and it can be recognized as the residual effect from the incomplete cancellation between the rate of the diamagnetic poloidal momentum gain and the Lorentz force due to the radial diffusion-like flux. The compact expression for radial force is also obtained for the first time, whose nonresonant component is expressed as the sum of the ponderomotive force on particles and the gradients of the nonresonant perpendicular pressure and of the nonresonant momentum flux due to the finite temperature effect. Numerical calculations in a 1-D slab model show that the resonant component dependent on the inhomogeneities may be significant when the ion absorption dominates the resonant wave-particle interaction. A quantitative estimation shows that the novel component in the parallel force is important to understand the experiments of the ion-cyclotron-frequency mode-conversion flow drive.

  13. Black Carbon Radiative Forcing over the Tibetan Plateau

    SciTech Connect (OSTI)

    He, Cenlin; Li, Qinbin; Liou, K. N.; Takano, Y.; Gu, Yu; Qi, L.; Mao, Yuhao; Leung, Lai-Yung R.

    2014-11-28

    We estimate the snow albedo forcing and direct radiative forcing (DRF) of black carbon (BC) in the Tibetan Plateau using a global chemical transport model in conjunction with a stochastic snow model and a radiative transfer model. Our best estimate of the annual BC snow albedo forcing in the Plateau is 2.9 W m-2 (uncertainty: 1.55.0 W m-226 ). We find that BC-snow internal mixing increases the albedo forcing by 40-60% compared with external mixing and coated BC increases the forcing by 30-50% compared with uncoated BC, whereas Koch snowflakes reduce the forcing by 20-40% relative to spherical snow grains. Our best estimate of the annual BC DRF at the top of the atmosphere is 2.3 W m-2 (uncertainty: 0.74.3 W m-230 ) in the Plateau after scaling the modeled BC absorption optical depth to Aerosol Robotic Network (AERONET) observations. The BC forcings are attributed to emissions from different regions.

  14. Comparison of Cellulose Ib Simulations with Three Carbohydrate Force Fields

    SciTech Connect (OSTI)

    Matthews, J. F.; Beckham, G. T.; Bergenstrahle, M.; Brady, J. W.; Himmel, M. E.; Crowley, M. F.

    2012-02-14

    Molecular dynamics simulations of cellulose have recently become more prevalent due to increased interest in renewable energy applications, and many atomistic and coarse-grained force fields exist that can be applied to cellulose. However, to date no systematic comparison between carbohydrate force fields has been conducted for this important system. To that end, we present a molecular dynamics simulation study of hydrated, 36-chain cellulose I{beta} microfibrils at room temperature with three carbohydrate force fields (CHARMM35, GLYCAM06, and Gromos 45a4) up to the near-microsecond time scale. Our results indicate that each of these simulated microfibrils diverge from the cellulose I{beta} crystal structure to varying degrees under the conditions tested. The CHARMM35 and GLYCAM06 force fields eventually result in structures similar to those observed at 500 K with the same force fields, which are consistent with the experimentally observed high-temperature behavior of cellulose I. The third force field, Gromos 45a4, produces behavior significantly different from experiment, from the other two force fields, and from previously reported simulations with this force field using shorter simulation times and constrained periodic boundary conditions. For the GLYCAM06 force field, initial hydrogen-bond conformations and choice of electrostatic scaling factors significantly affect the rate of structural divergence. Our results suggest dramatically different time scales for convergence of properties of interest, which is important in the design of computational studies and comparisons to experimental data. This study highlights that further experimental and theoretical work is required to understand the structure of small diameter cellulose microfibrils typical of plant cellulose.

  15. ARM - PI Product - Continuous Forcing Data, Darwin, Australia

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ProductsContinuous Forcing Data, Darwin, Australia ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send PI Product : Continuous Forcing Data, Darwin, Australia Long term, large scale continuous forcing data set for three complete wet seasons (2004-2005, 2005-2006 and 2006-2007) in Darwin, Australia. Data Details Contact Christian Jakob Monash University christian.jakob@monash.edu +61 3 9905 4461 School of Earth,

  16. ARM - PI Product - SCM Forcing Data Derived from NWP Analyses

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ProductsSCM Forcing Data Derived from NWP Analyses ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send PI Product : SCM Forcing Data Derived from NWP Analyses Forcing data, suitable for use with single column models (SCMs) and cloud resolving models (CRMs), have been derived from NWP analyses for the ARM (Atmospheric Radiation Measurement) Tropical Western Pacific (TWP) sites of Manus Island and Nauru. Data Details

  17. Polarization force-induced changes in the dust sheath formation

    SciTech Connect (OSTI)

    Mayout, Saliha; Bentabet, Karima; Tribeche, Mouloud

    2015-09-15

    The modifications arising in the dusty plasma sheath structure due to the presence of polarization forces acting on the dust grains are investigated. The corresponding appropriate Bohm criterion for sheath formation is obtained. It is found that the critical Mach number, beyond which the dusty plasma electrostatic sheath sets in, decreases whenever the polarization effects become important. In addition, when the polarization force dominates over the electrical one, the dust plasma sheath cannot set in. This happens whenever the dust grain size exceeds a critical threshold. Moreover, the sheath electrostatic potential-gradient becomes abruptly steep, and the sheath thickness becomes broader as the polarization force effects strengthen.

  18. Effects of realistic tensor force on nuclear structure

    SciTech Connect (OSTI)

    Nakada, H.

    2012-10-20

    First-order tensor-force effects on nuclear structure are investigated in the self-consistent mean-field and RPA calculations with the M3Y-type semi-realistic interactions, which contain the realistic tensor force. The tensor force plays a key role in Z- or N-dependence of the shell structure, and in transitions involving spin degrees-of-freedom. It is demonstrated that the semi-realistic interactions successfully describe the N-dependence of the shell structure in the proton-magic nuclei (e.g. Ca and Sn), and the magnetic transitions (e.g. M1 transition in {sup 208}Pb).

  19. Approximate photochemical dynamics of azobenzene with reactive force fields

    SciTech Connect (OSTI)

    Li, Yan; Hartke, Bernd

    2013-12-14

    We have fitted reactive force fields of the ReaxFF type to the ground and first excited electronic states of azobenzene, using global parameter optimization by genetic algorithms. Upon coupling with a simple energy-gap transition probability model, this setup allows for completely force-field-based simulations of photochemical cis?trans- and trans?cis-isomerizations of azobenzene, with qualitatively acceptable quantum yields. This paves the way towards large-scale dynamics simulations of molecular machines, including bond breaking and formation (via the reactive force field) as well as photochemical engines (presented in this work)

  20. House Subcommittee on Strategic Forces of the Committee on Armed...

    Energy Savers [EERE]

    House Subcommittee on Strategic Forces of the Committee on Armed Services January 31, 2007 - 10:15am Addthis Statement of Energy Secretary Samuel W. Bodman Madam Chairman and ...

  1. Force Field Parameter Estimation of Functional Perfluoropolyether Lubricants

    SciTech Connect (OSTI)

    Smith, R.; Chung, P.S.; Steckel, J; Jhon, M.S.; Biegler, L.T.

    2011-01-01

    The head disk interface in hard disk drive can be considered one of the hierarchical multiscale systems, which require the hybridization of multiscale modeling methods with coarse-graining procedure. However, the fundamental force field parameters are required to enable the coarse-graining procedure from atomistic/molecular scale to mesoscale models .In this paper, we investigate beyond molecular level and perform ab-initio calculations to obtain the force field parameters. Intramolecular force field parameters for the Zdol and Ztetraol were evaluated with truncated PFPE molecules to allow for feasible quantum calculations while still maintaining the characteristic chemical structure of the end groups. Using the harmonic approximation to the bond and angle potentials, the parameters were derived from the Hessian matrix, and the dihedral force constants are fit to the torsional energy profiles generated by a series of constrained molecular geometry optimization.

  2. Air Force Generic In-Kind Consideration Trust Agreement | Open...

    Open Energy Info (EERE)

    Trust Agreement Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: Air Force Generic In-Kind Consideration Trust AgreementLegal Abstract...

  3. ARI Task Force, ECA Work to Stimulate Regional Economies

    Broader source: Energy.gov [DOE]

    WASHINGTON, D.C. – DOE’s Asset Revitalization Initiative (ARI) Task Force met with the Energy Communities Alliance (ECA) this week to advance the Department’s processes for transferring excess land...

  4. Report of the SEAB Hubs+ Task Force | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    the new Funding Constructs for Energy Research and Development (R&D) in the Department of Energy. The Task Force was charged with assisting the DOE in evaluating the management and...

  5. Proton Dripping Tests a Fundamental Force of Nature

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    off, similar to the water in this photo, leaving an oxygen-13 nucleus behind. Like gravity, the strong interaction is a fundamental force of nature. It is the essential "glue"...

  6. Air Force Guide to Unsolicited Proposals | Open Energy Information

    Open Energy Info (EERE)

    Guide to Unsolicited Proposals Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: Air Force Guide to Unsolicited ProposalsLegal Abstract...

  7. Air Force Generic In-Kind Consideration Delivery Agreement |...

    Open Energy Info (EERE)

    Delivery Agreement Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: Air Force Generic In-Kind Consideration Delivery AgreementLegal...

  8. Workshop on Atomic Force Microscopy, Nanometrology and More ...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Swarna Addepalli 2012.12.17 One of my colleagues from our global research center in India, K.G. V. Siva Kumar (Sivakumar), recently attended a workshop on Atomic Force...

  9. Force Field Parameter Estimation of Functional Perfluoropolyether Lubricants

    SciTech Connect (OSTI)

    Smith, R.; Chung, P.S.; Steckel, J; Jhon, M.S.; Biegler, L.T.

    2011-01-01

    The head disk interface in a hard disk drive can be considered to be one of the hierarchical multiscale systems, which require the hybridization of multiscale modeling methods with coarse-graining procedure. However, the fundamental force field parameters are required to enable the coarse-graining procedure from atomistic/molecular scale to mesoscale models. In this paper, we investigate beyond molecular level and perform ab initio calculations to obtain the force field parameters. Intramolecular force field parameters for Zdol and Ztetraol were evaluated with truncated PFPE molecules to allow for feasible quantum calculations while still maintaining the characteristic chemical structure of the end groups. Using the harmonic approximation to the bond and angle potentials, the parameters were derived from the Hessian matrix, and the dihedral force constants are fit to the torsional energy profiles generated by a series of constrained molecular geometry optimization.

  10. LORENTZ SELF-FORCE OF AN ELLIPSE CURRENT LOOP MODEL

    SciTech Connect (OSTI)

    Olmedo, Oscar; Zhang Jie; Kunkel, Valbona

    2013-07-10

    In this work, the Lorentz self-force of an ellipse current loop model is derived. We are motivated by the fact that it has been reported in the literature that coronal mass ejection morphology can resemble an ellipse in the field of view of coronagraph images. Deriving the Lorentz self-force using an ellipse geometry has the advantage of being able to be solved analytically, as opposed to other more complex geometries. The derived ellipse model is compared with the local curvature approximation, where the Lorentz self-force at the ellipse major/minor axis is compared with the Lorentz self-force of a torus with curvature equal to the local curvature at the ellipses major/minor axis. It is found that the local curvature approximation is valid for moderate values of eccentricity.

  11. Transport Task Force (TTF) 2011 | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    April 6, 2011, 9:00am to April 9, 2011, 5:00pm Conference Bahia Resort Hotel San Diego, CA USA Transport Task Force (TTF) 2011 The ultimate goal of the work of the Transport Task...

  12. Zero-Gravity Centrifugal Force | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to create centrifugal force create its on gravity? Example if you were spinning a iron ball in space, just as the earth spins, does the iron ball create its on gravity? scott...

  13. Asset Revitalization Initiative Task Force Issues Its Second Report

    Broader source: Energy.gov [DOE]

    The Asset Revitalization Initiative (ARI) Task Force is pleased to announce the release of its second report providing information to the public on historic actions to reuse U.S. Department of...

  14. Federal Protective Force - DOE Directives, Delegations, and Requiremen...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for the management and operation of the Department of Energy (DOE) Federal protective forces (FPFs). Cancels DOE M 470.4-3, Chg 1. Canceled by DOE O 473.3. m4704-8.pdf -- PDF...

  15. Modelled Black Carbon Radiative Forcing and Atmospheric Lifetime...

    Office of Scientific and Technical Information (OSTI)

    Adjusting model results to measurements in remote regions, and at high altitudes, leads to a 25% reduction in the multi-model median direct BC forcing from fossil fuel and biofuel ...

  16. Audit of Work Force Restructuring at the Fernald Environmental...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    U.S. Department of Energy Office of Inspector General AUDIT OF WORK FORCE RESTRUCTURING AT THE FERNALD ENVIRONMENTAL MANAGEMENT PROJECT Report Number: ER-B-96-01 Eastern Regional ...

  17. The Secretary of Energy Advisory Board Task Force to Support...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... SEAB Hubs + Report DOE Response to SEAB Hubs+ Report SEAB Task Force on HubsEFRCsBRCsARPA-E Members: Cherry Murray, Harvard University, TF Chair, * Rafael Bras, Georgia ...

  18. Colorado - Report of the Task Force on Statewide Transmission...

    Open Energy Info (EERE)

    Colorado - Report of the Task Force on Statewide Transmission Siting and Permitting Jump to: navigation, search OpenEI Reference LibraryAdd to library Report: Colorado - Report of...

  19. Appendix 3. Task Force Meeting Agendas and Materials Reviewed...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Force Meeting Agenda December 3-4, 2013 Lawrence Livermore National Laboratory HPCIC, Yosemite Room 7000 East Avenue Livermore, CA Tuesday, December 3 4:00-4:15 PM Introductions ...

  20. Expert systems and the CPI product substitution review: A needs analysis for the US Bureau of Labor Statistics

    SciTech Connect (OSTI)

    Arrowood, L.F.; Tonn, B.E.

    1992-02-01

    This report presents recommendations relative to the use of expert systems and machine learning techniques by the Bureau of Labor Statistics (BLS) to substantially automate product substitution decisions associated with the Consumer Price Index (CPI). Thirteen commercially available, PC-based expert system shells have received in-depth evaluations. Various machine learning techniques were also reviewed. Two recommendations are given: (1) BLS should use the expert system shell LEVEL5 OBJECT and establish a software development methodology for expert systems; and (2) BLS should undertake a small study to evaluate the potential of machine learning techniques to create and maintain the approximately 350 ELI-specific knowledge bases to be used in CPI product substitution review.

  1. Demonstration Assessment of Light-Emitting Diode Parking Structure Lighting at U.S. Department of Labor Headquarters

    SciTech Connect (OSTI)

    Kinzey, Bruce R.; Myer, Michael

    2013-03-01

    This report documents a solid-state lighting (SSL) technology demonstration at the parking structure of the U.S. Department of Labor (DOL) Headquarters in Washington, DC, in which light-emitting diode (LED) luminaires were substituted for the incumbent high-pressure sodium (HPS) luminaires and evaluated for relative light quantity and performance. The demonstration results show energy savings of 52% from the initial conversion of HPS to the LED product. These savings were increased to 88% by using occupancy sensor controls that were ultimately set to reduce power to 10% of high state operation after a time delay of 2.5 minutes. Because of the relatively high cost of the LED luminaires at their time of purchase for this project (2010), the simple payback periods were 6.5 years and 4.9 years for retrofit and new construction scenarios, respectively. Staff at DOL Headquarters reported high satisfaction with the operation of the LED product.

  2. Joining Forces: Clean Energy Companies Commit to Hire Veterans | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Joining Forces: Clean Energy Companies Commit to Hire Veterans Joining Forces: Clean Energy Companies Commit to Hire Veterans April 27, 2015 - 9:15am Addthis AirStreams Renewables trains veterans on how to get certified to work on wind towers. Last Thursday, the First Lady announced that companies from the energy, manufacturing, transportation and information technology sectors have committed to hiring approximately 90,000 veterans and military spouses over the next five years. |

  3. A Nanocrystal Sensor for Luminescence Detection of Cellular Forces

    SciTech Connect (OSTI)

    Choi, Charina; Chou, Jonathan; Lutker, Katie; Werb, Zena; Alivisatos, Paul

    2011-09-29

    Quantum dots have been used as bright fluorescent tags with high photostability to probe numerous biological systems. In this work we present the tetrapod quantum dot as a dynamic, next-generation nanocrystal probe that fluorescently reports cellular forces with spatial and temporal resolution. Its small size and colloidal state suggest that the tetrapod may be further developed as a tool to measure cellular forces in vivo and with macromolecular spatial resolution.

  4. Using Atom Interferometry to Search for New Forces

    SciTech Connect (OSTI)

    Wacker, Jay G.; /SLAC

    2009-12-11

    Atom interferometry is a rapidly advancing field and this Letter proposes an experiment based on existing technology that can search for new short distance forces. With current technology it is possible to improve the sensitivity by up to a factor of 10{sup 2} and near-future advances will be able to rewrite the limits for forces with ranges from 100 {micro}m to 1km.

  5. Before the Senate Armed Services, Subcommittee on Strategic Forces |

    Office of Environmental Management (EM)

    Services Before the Senate Armed Services Before the Senate Armed Services By: Ines Triay, Assistant Secretary Office of Environmenal Management Subject: EM FY 2011 Budget Request 04-21-2010_Final Testimony _2_Triay.pdf (42.96 KB) More Documents & Publications Assistant Secretary Triay's Written Statement before the House Armed Services Subcommittee on Strategic Forces (March 25, 2010) Assistant Secretary Triay's Written Statement before Senate Armed Services Subcommittee on Strategic Forces

  6. Generation of spin motive force in a soliton lattice

    SciTech Connect (OSTI)

    Ovchinnikov, A. S. Sinitsyn, V. E.; Bostrem, I. G.; Kishine, J.

    2013-05-15

    The generation of a spin motive force in a chiral helimagnet due to the action of two crossed magnetic fields is considered. The cases of pulsed and periodic magnetic fields directed along the helical axis under a perpendicular dc field are analyzed. It is shown that, in the case of a pulsed field, the spin motive force is related to dissipation, whereas in a periodic field, there is a reactive component that is not related to damping processes.

  7. WIPP Security Force Recognized for Outstanding Safety | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Security Force Recognized for Outstanding Safety WIPP Security Force Recognized for Outstanding Safety May 9, 2013 - 12:00pm Addthis U.S. Department of Energy Carlsbad Field Office Manager Joe Franco (right) presents the Star of Excellence Award to Security Walls, LLC Manager Richard De Los Santos. U.S. Department of Energy Carlsbad Field Office Manager Joe Franco (right) presents the Star of Excellence Award to Security Walls, LLC Manager Richard De Los Santos. Media Contact Deb

  8. July 2012, Work Force Retention Work Group Status Overview

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Work Force Retention Work Group Status Overview Accomplishments: 1. Progress on the completion of the 10 CFR 1046 modifications to address barriers to workforce retention. Written response to public comment is being drafted by HS-51. 2. Pro-Force (PF) union representative, Randy Lawson, identified this accomplishment as the single most significant step toward PF workforce retention in over 20 years. 3. Draft re-charter of PF Career Options Committee (PFCOC) to establish a PF Working Group

  9. A study of two-body forces in fluidization

    SciTech Connect (OSTI)

    Kashiwa, B. A.; Rauenzahn, Rick M.

    2004-01-01

    The effect of two-body forces on the structure of dynamic waves in fluidized beds is studied, with particular emphasis on expansion waves. Averaged equations of motion are used for the study, so the media appear to be interpenetrating continua. Both inertial and viscous two-body effects are considered for incompressible materials fluidized by an incompressible fluid. Inertial effects are included in the averaged momentum exchange force, using exact (classical) results for the potential flow generated by the motion of one submerged body relative to another body. Viscous effects are represented, in the limit of zero relative Reynolds number, by solutions to Stokes equations for the two-body problem. For simple one-dimensional motion the inertial force is repulsive always, giving a positive compressibility to the dispersed field total density; the force is of such a magnitude that the single-pressure continuum equations are unconditionally hyperbolic. The corresponding 1-D viscous force is attractive when the bodies move apart, and therefore introduces a negative compressibility to the dispersed field. Competition between the two-body inertial and viscous forces ultimately determines the nature of dynamic waves in a given fluidization system.

  10. Report of the Fermilab ILC Citizens' Task Force

    SciTech Connect (OSTI)

    2008-06-01

    Fermi National Accelerator Laboratory convened the ILC Citizens' Task Force to provide guidance and advice to the laboratory to ensure that community concerns and ideas are included in all public aspects of planning and design for a proposed future accelerator, the International Linear Collider. In this report, the members of the Task Force describe the process they used to gather and analyze information on all aspects of the proposed accelerator and its potential location at Fermilab in northern Illinois. They present the conclusions and recommendations they reached as a result of the learning process and their subsequent discussions and deliberations. While the Task Force was charged to provide guidance on the ILC, it became clear during the process that the high cost of the proposed accelerator made a near-term start for the project at Fermilab unlikely. Nevertheless, based on a year of extensive learning and dialogue, the Task Force developed a series of recommendations for Fermilab to consider as the laboratory develops all successor projects to the Tevatron. The Task Force recognizes that bringing a next-generation particle physics project to Fermilab will require both a large international effort and the support of the local community. While the Task Force developed its recommendations in response to the parameters of a future ILC, the principles they set forth apply directly to any large project that may be conceived at Fermilab, or at other laboratories, in the future. With this report, the Task Force fulfills its task of guiding Fermilab from the perspective of the local community on how to move forward with a large-scale project while building positive relationships with surrounding communities. The report summarizes the benefits, concerns and potential impacts of bringing a large-scale scientific project to northern Illinois.

  11. F.E. Warren Air Force Base Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    F.E. Warren Air Force Base Wind Farm Jump to: navigation, search Name F.E. Warren Air Force Base Wind Farm Facility F.E. Warren Air Force Base Sector Wind energy Facility Type...

  12. First interim report of the Federal Fleet Conversion Task Force

    SciTech Connect (OSTI)

    Not Available

    1993-08-01

    The Federal Fleet Conversion Task Force was created by Executive Order 12844, signed by President Clinton on April 21, 1993. In the Order, the President directed that purchases of alternative fueled vehicles by the Federal Government be substantially increased beyond the levels required by current law. The President charged the Task Force with developing recommendations for carrying out the Executive Order, with special emphasis on setting a course that will lead to the widespread use of alternative fueled vehicles by Federal, State, and local government fleets, by private fleets and, ultimately, by individuals. The chief recommendation of the Task Force is the establishment of a Presidential Clean Cities Initiative. To support creation of the Presidential Initiative, the Task Force identified 38 cities and regions, prioritized into three tiers, for concentrating the Initiative`s efforts in Fiscal Years 1994 through 1996. This concentration of effort is key to the effectiveness of the Initiative. The 38 cities and regions would receive priority funding for Federal vehicle purchases and for infrastructure development. In addition, the Task Force has made specific recommendations for overcoming numerous regulatory, economic, and technical barriers that have slowed the introduction of alternative fueled vehicles into general use.

  13. Dynamic force spectroscopy of parallel individual mucin1-antibody bonds

    SciTech Connect (OSTI)

    Sulchek, T A; Friddle, R W; Langry, K; Lau, E; Albrecht, H; Ratto, T; DeNardo, S; Colvin, M E; Noy, A

    2005-05-02

    We used atomic force microscopy (AFM) to measure the binding forces between Mucin1 (MUC1) peptide and a single chain antibody fragment (scFv) selected from a scFv library screened against MUC1. This binding interaction is central to the design of the molecules for targeted delivery of radioimmunotherapeutic agents for prostate and breast cancer treatment. Our experiments separated the specific binding interaction from non-specific interactions by tethering the antibody and MUC1 molecules to the AFM tip and sample surface with flexible polymer spacers. Rupture force magnitude and elastic characteristics of the spacers allowed identification of the bond rupture events corresponding to different number of interacting proteins. We used dynamic force spectroscopy to estimate the intermolecular potential widths and equivalent thermodynamic off rates for mono-, bi-, and tri-valent interactions. Measured interaction potential parameters agree with the results of molecular docking simulation. Our results demonstrate that an increase of the interaction valency leads to a precipitous decline in the dissociation rate. Binding forces measured for mono and multivalent interactions match the predictions of a Markovian model for the strength of multiple uncorrelated bonds in parallel configuration. Our approach is promising for comparison of the specific effects of molecular modifications as well as for determination of the best configuration of antibody-based multivalent targeting agents.

  14. Secretary of Energy Advisory Board (SEAB) Task Force on EM Technology...

    Energy Savers [EERE]

    Secretary of Energy Advisory Board (SEAB) Task Force on EM Technology Development Secretary of Energy Advisory Board (SEAB) Task Force on EM Technology Development Presentation...

  15. The Secretary of Energy Advisory Board (SEAB) Task Force on DOE...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Secretary of Energy Advisory Board (SEAB) Task Force on DOE National Laboratories The Secretary of Energy Advisory Board (SEAB) Task Force on DOE National Laboratories The...

  16. Photothermally excited force modulation microscopy for broadband nanomechanical property measurements

    SciTech Connect (OSTI)

    Wagner, Ryan Killgore, Jason P.

    2015-11-16

    We demonstrate photothermally excited force modulation microscopy (PTE FMM) for mechanical property characterization across a broad frequency range with an atomic force microscope (AFM). Photothermal excitation allows for an AFM cantilever driving force that varies smoothly as a function of drive frequency, thus avoiding the problem of spurious resonant vibrations that hinder piezoelectric excitation schemes. A complication of PTE FMM is that the sub-resonance cantilever vibration shape is fundamentally different compared to piezoelectric excitation. By directly measuring the vibrational shape of the cantilever, we show that PTE FMM is an accurate nanomechanical characterization method. PTE FMM is a pathway towards the characterization of frequency sensitive specimens such as polymers and biomaterials with frequency range limited only by the resonance frequency of the cantilever and the low frequency limit of the AFM.

  17. Analysis of scrams and forced outages at boiling water reactors

    SciTech Connect (OSTI)

    Earle, R. T.; Sullivan, W. P.; Miller, K. R.; Schwegman, W. J.

    1980-07-01

    This report documents the results of a study of scrams and forced outages at General Electric Boiling Water Reactors (BWRs) operating in the United States. This study was conducted for Sandia Laboratories under a Light Water Reactor Safety Program which it manages for the United States Department of Energy. Operating plant data were used to identify the causes of scrams and forced outages. Causes of scrams and forced outages have been summarized as a function of operating plant and plant age and also ranked according to the number of events per year, outage time per year, and outage time per event. From this ranking, identified potential improvement opportunities were evaluated to determine the associated benefits and impact on plant availability.

  18. Determining the role of hydration forces in protein folding

    SciTech Connect (OSTI)

    Sorenson, J.M. [Univ. of California, Berkeley, CA (United States). Dept. of Chemistry] [Univ. of California, Berkeley, CA (United States). Dept. of Chemistry; Hura, G. [Univ. of California, Berkeley, CA (United States)] [Univ. of California, Berkeley, CA (United States); [Lawrence Berkeley National Lab., CA (United States). Life Sciences Div.; Soper, A.K. [Rutherford Appleton Lab., Didcot (United Kingdom). ISIS Facility] [Rutherford Appleton Lab., Didcot (United Kingdom). ISIS Facility; Pertsemlidis, A. [Univ. of Texas Southwestern Medical Center, Dallas, TX (United States). Dept. of Biochemistry] [Univ. of Texas Southwestern Medical Center, Dallas, TX (United States). Dept. of Biochemistry; Head-Gordon, T. [Lawrence Berkeley National Lab., CA (United States)] [Lawrence Berkeley National Lab., CA (United States)

    1999-07-01

    One of the primary issues in protein folding is determining what forces drive folding and eventually stabilize the native state. A delicate balance exists between electrostatic forces such as hydrogen bonding and salt bridges, and the hydrophobic effect, which are present for both intramolecular protein interactions and intermolecular contributions with the surrounding aqueous environment. This article describes a combined experimental, theoretical, and computational effort to show how the complexity of aqueous hydration can influence the structure, folding and aggregation, and stability of model protein systems. The unification of the theoretical and experimental work is the development or discovery of effective amino acid interactions that implicitly include the effects of aqueous solvent. The authors show that consideration of the full range of complexity of aqueous hydration forces such as many-body effects, long-ranged character of aqueous solvation, and the assumptions made about the degree of protein hydrophobicity can directly impact the observed structure, folding, and stability of model protein systems.

  19. Detection of forced oscillations in power systems with multichannel methods

    SciTech Connect (OSTI)

    Follum, James D.

    2015-09-30

    The increasing availability of high fidelity, geographically dispersed measurements in power systems improves the ability of researchers and engineers to study dynamic behaviors in the grid. One such behavior that is garnering increased attention is the presence of forced oscillations. Power system engineers are interested in forced oscillations because they are often symptomatic of the malfunction or misoperation of equipment. Though the resulting oscillation is not always large in amplitude, the root cause may be serious. In this report, multi-channel forced oscillation detection methods are developed. These methods leverage previously developed detection approaches based on the periodogram and spectral-coherence. Making use of geographically distributed channels of data is shown to improved detection performance and shorten the delay before an oscillation can be detected in the online environment. Results from simulated and measured power system data are presented.

  20. Corroboration of magnetic forces in US Maglev design

    SciTech Connect (OSTI)

    Coffey, H.; He, J.; Wang, Z.

    1993-06-01

    Four System Concept Definition (SCD) contractors to the National Maglev Initiative (NMI) developed conceptual designs of maglev systems in 1991--1992. The objective of the work reported here was to perform independent calculations of the magnetic forces and fields of these four systems to assess the ``reasonableness`` of the results presented to the government. Commercial computer software was used for computing forces in the system employing nonlinear ferromagnetic materials and for some calculations of induced eddy current effects in finite-sized systems. Other cases required the use of models developed at ANL and verified by experiment, or in a few cases, new computer programs that have not been validated by experiment. The magnetic forces calculated by the contractors were found to be credible in every case evaluated. The stray fields were also found to be in reasonable agreement with those calculated by the contractors, but, for lack of spice, are not reported here.

  1. Corroboration of magnetic forces in US Maglev design

    SciTech Connect (OSTI)

    Coffey, H.; He, J.; Wang, Z.

    1993-01-01

    Four System Concept Definition (SCD) contractors to the National Maglev Initiative (NMI) developed conceptual designs of maglev systems in 1991--1992. The objective of the work reported here was to perform independent calculations of the magnetic forces and fields of these four systems to assess the reasonableness'' of the results presented to the government. Commercial computer software was used for computing forces in the system employing nonlinear ferromagnetic materials and for some calculations of induced eddy current effects in finite-sized systems. Other cases required the use of models developed at ANL and verified by experiment, or in a few cases, new computer programs that have not been validated by experiment. The magnetic forces calculated by the contractors were found to be credible in every case evaluated. The stray fields were also found to be in reasonable agreement with those calculated by the contractors, but, for lack of spice, are not reported here.

  2. On transition from Alfvn resonance to forced magnetic reconnection

    SciTech Connect (OSTI)

    Luan, Q. [MOE Key Lab of Materials Modification by Beams and School of Physics and Optoelectrical Technology, Dalian University of Technology, Dalian 116024 (China); Wang, X., E-mail: xgwang@hit.edu.cn [Department of Physics, Harbin Institute of Technology, Harbin 150001 (China)

    2014-07-15

    We revisit the transition from Alfvn resonance to forced magnetic reconnection with a focus on the property of their singularities. As the driven frequency tends to zero, the logarithmic singularity of Alfvn resonance shifts to the power-law singularity of forced reconnection, due to merging of the two resonance layers. The transition criterion depends on either kinetic effects or dissipations that resolve the singularity. As an example, a small but finite resistivity ? is introduced to investigate the transition process. The transition threshold is then obtained as the driven frequency reaches a level of ?O((?/k){sup 1/3})

  3. Micropatterning of metal substrate by adhesive force lithography

    SciTech Connect (OSTI)

    Seo, Soon-min; Park, Jeong-yong; Lee, Hong H.

    2005-03-28

    We introduce adhesive force lithography (AFL), a detachment-based method for patterning metal surface. In this method, all the polymer layer except for the desired pattern gets lifted up from the metal surface. The craze microstructure unique to thin polymer films on the order of 10{sup 2} nm is utilized for this AFL along with a difference in adhesive force at two interfaces. Poly(urethaneacrylate) mold, which has a high enough work of adhesion with polymer, makes AFL effective. This technique is purely additive, fast ({approx}10 s contact time), and applicable to large area patterning (10 cmx10 cm)

  4. Mitigated-force carriage for high magnetic field environments

    SciTech Connect (OSTI)

    Ludtka, Gerard M.; Ludtka, Gail M.; Wilgen, John B.; Murphy, Bart L.

    2015-05-19

    A carriage for high magnetic field environments includes a plurality of work-piece separators disposed in an operable relationship with a work-piece processing magnet having a magnetic field strength of at least 1 Tesla for supporting and separating a plurality of work-pieces by a preselected, essentially equal spacing, so that, as a first work-piece is inserted into the magnetic field, a second work-piece is simultaneously withdrawn from the magnetic field, so that an attractive magnetic force imparted on the first work-piece offsets a resistive magnetic force imparted on the second work-piece.

  5. Los Alamos National Security awards protective force contract for Los

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Alamos National Laboratory to SOC Los Alamos Protective force contract awarded to SOC Los Alamos Los Alamos National Security awards protective force contract for Los Alamos National Laboratory to SOC Los Alamos The contract is for three years with two one-year extension options and has a value of about $251 million. October 28, 2010 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation

  6. Chiral three-nucleon forces and pairing in nuclei

    SciTech Connect (OSTI)

    Lesinski, Thomas; Hebeler, K.; Duguet, Thomas C; Schwenk, Achim

    2012-01-01

    We present the first study of pairing in nuclei including three-nucleon forces. We perform systematic calculations of the odd-even mass staggering generated using a microscopic pairing interaction at first order in chiral low-momentum interactions. Significant repulsive contributions from the leading chiral three-nucleon forces are found. Two- and three-nucleon interactions combined account for approximately 70% of the experimental pairing gaps, which leaves room for self-energy and induced interaction effects that are expected to be overall attractive in nuclei.

  7. A NEW INTERPHASE FORCE IN TWO-PHASE FLUIDIZED BEDS

    SciTech Connect (OSTI)

    D. ZHANG; W. VANDERHEYDEN

    2001-05-01

    Mesoscale structures such as particle clusters have been observed both in experiments and in numerical simulations of circulating fluidized beds. In a numerical simulation, in order to account for the effects of such mesoscale structures, the computational grids have to be fine enough. The use of such fine grids is impractical in engineering applications due to excessive computational costs. To predict the macroscopic behavior of a fluidized bed with reasonable computation cost, they perform a second average over the averaged equations for two-phase flows. A mesoscale inter-phase exchange force is found to be the correlation of the particle volume fraction and the pressure gradient. This force is related to the mesoscale added mass of the two-phase flow. Typically, added mass for particle scale interactions is negligible in gas-solid flows since the gas density is small compared to density of solid particles. However, for a mesoscale structure, such as a bubble, the surrounding media is the mixture of gas and particles. The surrounding fluid density experienced by the mesoscale structure is the density of the surrounding mixture. Therefore, the added mass of a mesoscale structure, such as bubbles, cannot be neglected. The property of this new force is studied based on the numerical simulation of a fluidized bed using high grid resolution. It is shown that this force is important in the region where the particle volume fraction is high. The effects of the inhomogeneity to the interphase drag are also studied.

  8. Numerical studies of a plasma diode with external forcing

    SciTech Connect (OSTI)

    Rekaa, V. L.; Pecseli, H. L.; Trulsen, J. K.

    2012-08-15

    With reference to laboratory Q-machine studies we analyze the dynamics of a plasma diode under external forcing. Assuming a strong axial magnetic field, the problem is analyzed in one spatial dimension by a particle-in-cell code. The cathode is assumed to be operated in electron rich conditions, supplying an abundance of electrons. We compare different forcing schemes with the results obtained by solving the van der Pol equation. In one method of forcing we apply an oscillation in addition to the DC end plate bias and consider both amplitude and frequency variations. An alternative method of perturbation consists of modelling an absorbing grid at some internal position. Also in this case we can have a constant frequency with varying amplitude or alternatively an oscillation with chirped frequency but constant amplitude. We find that the overall features of the forced van der Pol equation are recovered, but the details in the plasma response need more attention to the harmonic responses, requiring extensions of the model equation. The analysis is extended by introducing collisional effects, where we emphasize charge exchange collisions of ions, since these processes usually have the largest cross sections and give significant modifications of the diode performance. In particular we find a reduction in oscillator frequency, although a linear scaling of the oscillation time with the system length remains also in this case.

  9. Furlough or Reduction in Force in the Senior Executive Service

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2003-05-15

    To establish requirements and assign responsibilities for furlough and reduction in force (RIF) of the Senior Executive Service (SES) in the Department of Energy (DOE) and the National Nuclear Security Administration (NNSA). Supersedes O DOE 3350.1 Chg 1 and DOE 3351.2 Chg 1.

  10. A note on entropic force and brane cosmology

    SciTech Connect (OSTI)

    Ling, Yi; Wu, Jian-Pin E-mail: jianpinwu@yahoo.com.cn

    2010-08-01

    Recently Verlinde proposed that gravity is an entropic force caused by information changes when a material body moves away from the holographic screen. In this note we apply this argument to brane cosmology, and show that the cosmological equation can be derived from this holographic scenario.

  11. Operation Ivy. Joint Task Force 132, 1952. Final report

    SciTech Connect (OSTI)

    Not Available

    1985-09-01

    This report covers the activities of the Joint Task Force 132 in Operation Ivy, in 1952 at Eniwetok Atoll. Shots Mike and King were detonated in conjunction with eleven experimental programs. This report describes the device, weapon, and experimental programs, giving as many preliminary conclusions as can be drawn from early analysis of the data.

  12. Guide for Establishment of a Contingency Protective Force

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2003-03-27

    The Guide was developed to provide assistance in ensuring continued safe and secure operation of DOE sites and facilities, protection of Departmental employees, and the public in the event of emergency situations involving the establishment and deployment of a contingency protective force and the conduct of sustained operations. Canceled by DOE N 251.80.

  13. Russian (C. I. S. ) strategic nuclear forces, end of 1992

    SciTech Connect (OSTI)

    Not Available

    1993-03-01

    Russian (C.I.S.) strategic nuclear forces are approximately the same size as a year ago. The SS-25 intercontinental ballistic missile (ICBM) is the only weapon system in production; it continues to be fielded. There are still approximately 3,100 warheads deployed in Ukraine, Kazakhstan, and Belarus.

  14. Department of Energy Establishes Asset Revitalization Task Force

    Broader source: Energy.gov [DOE]

    Washington, D.C. – Secretary of Energy Steven Chu today announced the establishment of a Task Force on Asset Revitalization to facilitate a discussion among the Department of Energy, communities around DOE sites, nonprofits, tribal governments, the private sector and other stakeholders to identify reuse approaches as environmental cleanup efforts reach completion.

  15. Memorandum, Protective Force Law Enforcement Authority- May 1, 2009

    Broader source: Energy.gov [DOE]

    Investigation allegations that contractor procetive force personnel at a DOE site exceeded their legistative ,regulatory, and policy-based authority by providing on-duty, armed off-site assistance to local law enforcement authorites during other than recapture/recovery operations, and by accessing the local law enforcement database for background checks during the course of on-site administrative traffic stops.

  16. Urban Consortium Energy Task Force - Year 21 Final Report

    SciTech Connect (OSTI)

    2003-04-01

    The Urban Consortium Energy Task Force (UCETF), comprised of representatives of large cities and counties in the United States, is a subgroup of the Urban Consortium, an organization of the nation's largest cities and counties joined together to identify, develop and deploy innovative approaches and technological solutions to pressing urban issues.

  17. Demonstration of Security Benefits of Renewable Generation at FE Warren Air Force Base

    SciTech Connect (OSTI)

    Warwick, William M.; Myers, Kurt; Seifert, Gary

    2010-12-31

    Report detailing field demonstration of security benefits of renewable generation at FE Warren Air Force Base.

  18. Force Control and Nonlinear Master-Slave Force Profile to Manage an Admittance Type Multi-Fingered Haptic User Interface

    SciTech Connect (OSTI)

    Anthony L. Crawford

    2012-08-01

    Natural movements and force feedback are important elements in using teleoperated equipment if complex and speedy manipulation tasks are to be accomplished in remote and/or hazardous environments, such as hot cells, glove boxes, decommissioning, explosives disarmament, and space to name a few. In order to achieve this end the research presented in this paper has developed an admittance type exoskeleton like multi-fingered haptic hand user interface that secures the users palm and provides 3-dimensional force feedback to the users fingertips. Atypical to conventional haptic hand user interfaces that limit themselves to integrating the human hands characteristics just into the systems mechanical design this system also perpetuates that inspiration into the designed user interfaces controller. This is achieved by manifesting the property differences of manipulation and grasping activities as they pertain to the human hand into a nonlinear master-slave force relationship. The results presented in this paper show that the admittance-type system has sufficient bandwidth that it appears nearly transparent to the user when the user is in free motion and when the system is subjected to a manipulation task, increased performance is achieved using the nonlinear force relationship compared to the traditional linear scaling techniques implemented in the vast majority of systems.

  19. U.S. - Canada Power System Outage Task Force: Final Report on the

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Implementation of Task Force Recommendations | Department of Energy - Canada Power System Outage Task Force: Final Report on the Implementation of Task Force Recommendations U.S. - Canada Power System Outage Task Force: Final Report on the Implementation of Task Force Recommendations On August 14, 2003, the largest power blackout in North American history affected an area with an estimated 50 million people and 61,800 megawatts (MW) of electric load in the states of Ohio, Michigan,

  20. DESIGN AND CONSTRUCTION OF A FORCE-REFLECTING TELEOPERATION SYSTEM

    SciTech Connect (OSTI)

    M.A. Ebadian, Ph.D.

    1999-01-01

    For certain applications, such as space servicing, undersea operations, and hazardous material handling tasks in nuclear reactors, the environments can be uncertain, complex, and hazardous. Lives may be in danger if humans were to work under these conditions. As a result, a man-machine system--a teleoperator system--has been developed to work in these types of environments. In a typical teleoperator system, the actual system operates at a remote site; the operator located away from this system usually receives visual information from a video image and/or graphical animation on the computer screen. Additional feedback, such as aural and force information, can significantly enhance performance of the system. Force reflection is a type of feedback in which forces experienced by the remote manipulator are fed back to the manual controller. Various control methods have been proposed for implementation on a teleoperator system. In order to examine different control schemes, a one Degree-Of-Freedom (DOF) Force-Reflecting Manual Controller (FRMC) is constructed and integrated into a PC. The system parameters are identified and constructed as a mathematical model. The Proportional-Integral-Derivative (PID) and fuzzy logic controllers are developed and tested experimentally. Numerical simulation results obtained from the mathematical model are compared with those of experimental data for both types of controllers. In addition, the concept of a telesensation system is introduced. A telesensation system is an advanced teleoperator system that attempts to provide the operator with sensory feedback. In this context, a telesensation system integrates the use of a Virtual Reality (VR) unit, FRMC, and Graphical User Interface (GUI). The VR unit is used to provide the operator with a 3-D visual effect. Various commercial VR units are reviewed and features compared for use in a telesensation system. As for the FRMC, the conceptual design of a 3-DOF FRMC is developed in an effort to

  1. Labor Standards for Construction

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    --------------------------Chapter 23.0 (September 2010) 1 Executive Order 13514 - Federal Leadership in Environmental, Energy, and Economic Performance Reference: FAR 23, 52.223, DEAR 923, 952.223, 970.23, and 970.5223 Overview Executive Order 13514 - Federal Leadership in Environmental, Energy, and Economic Performance continues an increasing awareness of mankind's effect on the Earth's environment. The Executive Order was issued as a follow on to Executive Order 13423, Strengthening Federal

  2. Labor Standards for Construction

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    --------------------------Chapter 43.3 (March 2013) 1 Maintaining Alignment of Project Management with Contract Management for Non-Management and Operating (M&O) Cost Reimbursement Contracts for Capital Asset Projects, Environmental Remediation, Decontamination and Decommissioning, Facility Operations, and Other Major Projects Purpose and Applicability This chapter provides guidance on how Contracting Officers (COs) should manage contract changes, and how COs and Federal Project Directors

  3. Labor Standards for Construction

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... neurotoxins, agents which act on the hematopoietic system, and agents which damage the lungs, skin, eyes, or mucous membranes; o Chemicals which are combustible liquids, compressed ...

  4. Labor Standards for Construction

    Office of Environmental Management (EM)

    ... for all allowable costs up to the cost and funding limits established in the contract. ... - Chapter 4 Forecasting Cost Overruns, Section 4.3 Resolving Potential Cost Overruns. ...

  5. Labor Standards for Construction

    Energy Savers [EERE]

    neurotoxins, agents which act on the hematopoietic system, and agents which damage the lungs, skin, eyes, or mucous membranes; o Chemicals which are combustible liquids,...

  6. Sensitive magnetic force detection with a carbon nanotube resonator

    SciTech Connect (OSTI)

    Willick, Kyle; Haapamaki, Chris; Baugh, Jonathan

    2014-03-21

    We propose a technique for sensitive magnetic point force detection using a suspended carbon nanotube (CNT) mechanical resonator combined with a magnetic field gradient generated by a ferromagnetic gate electrode. Numerical calculations of the mechanical resonance frequency show that single Bohr magneton changes in the magnetic state of an individual magnetic molecule grafted to the CNT can translate to detectable frequency shifts, on the order of a few kHz. The dependences of the resonator response to device parameters such as length, tension, CNT diameter, and gate voltage are explored and optimal operating conditions are identified. A signal-to-noise analysis shows that, in principle, magnetic switching at the level of a single Bohr magneton can be read out in a single shot on timescales as short as 10??s. This force sensor should enable new studies of spin dynamics in isolated single molecule magnets, free from the crystalline or ensemble settings typically studied.

  7. Mirror force induced wave dispersion in Alfvn waves

    SciTech Connect (OSTI)

    Damiano, P. A.; Johnson, J. R.

    2013-06-15

    Recent hybrid MHD-kinetic electron simulations of global scale standing shear Alfvn waves along the Earth's closed dipolar magnetic field lines show that the upward parallel current region within these waves saturates and broadens perpendicular to the ambient magnetic field and that this broadening increases with the electron temperature. Using resistive MHD simulations, with a parallel Ohm's law derived from the linear Knight relation (which expresses the current-voltage relationship along an auroral field line), we explore the nature of this broadening in the context of the increased perpendicular Poynting flux resulting from the increased parallel electric field associated with mirror force effects. This increased Poynting flux facilitates wave energy dispersion across field lines which in-turn allows for electron acceleration to carry the field aligned current on adjacent field lines. This mirror force driven dispersion can dominate over that associated with electron inertial effects for global scale waves.

  8. Eielson Air Force Base Operable Unit 2 baseline risk assessment

    SciTech Connect (OSTI)

    Lewis, R.E.; Jarvis, T.T.; Jarvis, M.R.; Whelan, G.

    1994-10-01

    Operable Unit 2 at Eielson Air Force Base (AFB) near Fairbanks, is one of several operable units characterized by petroleum, oil, and lubricant contamination, and by the presence of organic products floating at the water table, as a result of Air Force operations since the 1940s. The base is approximately 19,270 acres in size, and comprises the areas for military operations and a residential neighborhood for military dependents. Within Operable Unit 2, there are seven source areas. These source areas were grouped together primarily because of the contaminants released and hence are not necessarily in geographical proximity. Source area ST10 includes a surface water body (Hardfill Lake) next to a fuel spill area. The primary constituents of concern for human health include benzene, toluene, ethylbenzene, and xylenes (BTEX). Monitored data showed these volatile constituents to be present in groundwater wells. The data also showed an elevated level of trace metals in groundwater.

  9. Mitigated-force carriage for high magnetic field environments

    DOE Patents [OSTI]

    Ludtka, Gerard M; Ludtka, Gail M; Wilgen, John B; Murphy, Bart L

    2014-05-20

    A carriage for high magnetic field environments includes a first work-piece holding means for holding a first work-piece, the first work-piece holding means being disposed in an operable relationship with a work-piece processing magnet having a magnetic field strength of at least 1 Tesla. The first work-piece holding means is further disposed in operable connection with a second work-piece holding means for holding a second work-piece so that, as the first work-piece is inserted into the magnetic field, the second work-piece is simultaneously withdrawn from the magnetic field, so that an attractive magnetic force imparted on the first work-piece offsets a resistive magnetic force imparted on the second work-piece.

  10. Intermodulation electrostatic force microscopy for imaging surface photo-voltage

    SciTech Connect (OSTI)

    Borgani, Riccardo Forchheimer, Daniel; Thorn, Per-Anders; Haviland, David B.; Bergqvist, Jonas; Ingans, Olle

    2014-10-06

    We demonstrate an alternative to Kelvin Probe Force Microscopy for imaging surface potential. The open-loop, single-pass technique applies a low-frequency AC voltage to the atomic force microscopy tip while driving the cantilever near its resonance frequency. Frequency mixing due to the nonlinear capacitance gives intermodulation products of the two drive frequencies near the cantilever resonance, where they are measured with high signal to noise ratio. Analysis of this intermodulation response allows for quantitative reconstruction of the contact potential difference. We derive the theory of the method, validate it with numerical simulation and a control experiment, and we demonstrate its utility for fast imaging of the surface photo-voltage on an organic photo-voltaic material.

  11. Nonlethal weapons as force options for the Army

    SciTech Connect (OSTI)

    Alexander, J.B.

    1994-04-01

    This paper suggests that future challenges to US national security will be very different from those previously experienced. In a number of foreseeable circumstances, conventional military force will be inappropriate. The National Command Authority, and other appropriate levels of command, need expanded options available to meet threats for which the application of massive lethal force is counterproductive or inadvisable. It is proposed that nonlethal concepts be developed that provide additional options for military leaders and politicians. Included in this initiative should be exploration of policy, strategy, doctrine, and training issues as well as the development of selected technologies and weapons. In addition, civilian law enforcement agencies have similar requirements for less-than-lethal systems. This may be an excellent example for a joint technology development venture.

  12. Exploration of technologies of use to civil security forces

    SciTech Connect (OSTI)

    Farnum, E.H.; Petrovic, J.J.; McClellan, K.

    1997-10-01

    This is the final report of a one-year, Laboratory Directed Research and Development (LDRD) project at Los Alamos National Laboratory (LANL). Current civilian security may be enhanced by the use of flexible tile technology. This project explored the use of such materials in three areas: bomb disposal containers, portable armor, and protective vests. In particular, there has been no evaluation of the use of flexible tiles, functional graded ceramics, and ballistic modeling codes in developing improved systems. The state of the art in these three areas was reviewed and potential collaborators were contacted. Civil security forces, both state and Laboratory, were interviewed to determine issues and needs. From a collaboration established with the New Mexico State Police, the authors now know that the technology has the potential to increase protection without adding undue weight and will be usable by civilian police forces for some applications.

  13. Dilution and resonance-enhanced repulsion in nonequilibrium fluctuation forces

    SciTech Connect (OSTI)

    Bimonte, Giuseppe [Dipartimento di Scienze Fisiche, Universita di Napoli Federico II, Complesso Universitario MSA, Via Cintia, I-80126 Napoli (Italy); INFN Sezione di Napoli, I-80126 Napoli (Italy); Emig, Thorsten [Laboratoire de Physique Theorique et Modeles Statistiques, CNRS UMR 8626, Bat. 100, Universite Paris-Sud, F-91405 Orsay cedex (France); Krueger, Matthias; Kardar, Mehran [Massachusetts Institute of Technology, Department of Physics, Cambridge, Massachusetts 02139 (United States)

    2011-10-15

    In equilibrium, forces induced by fluctuations of the electromagnetic field between electrically polarizable objects (microscopic or macroscopic) in vacuum are generically attractive. The force may, however, become repulsive for microscopic particles coupled to thermal baths with different temperatures. We demonstrate that this nonequilibrium repulsion can be realized also between macroscopic objects, as planar slabs, if they are kept at different temperatures. It is shown that repulsion can be enhanced by (i) tuning of material resonances in the thermal region and by (ii) reducing the dielectric contrast due to ''dilution''. This can lead to stable equilibrium positions. We discuss the realization of these effects for aerogels, yielding repulsion down to submicron distances at realistic porosities.

  14. Model based control of dynamic atomic force microscope

    SciTech Connect (OSTI)

    Lee, Chibum; Salapaka, Srinivasa M.

    2015-04-15

    A model-based robust control approach is proposed that significantly improves imaging bandwidth for the dynamic mode atomic force microscopy. A model for cantilever oscillation amplitude and phase dynamics is derived and used for the control design. In particular, the control design is based on a linearized model and robust H{sub ∞} control theory. This design yields a significant improvement when compared to the conventional proportional-integral designs and verified by experiments.

  15. Renewable Hydrogen Production at Hickam Air Force Base

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hydrogen Production at Hickam Air Force Base November 2009 Hawaii Center for Advanced Transportation Technologies * Established by the High Technology Development Corporation (a Hawaii State Government Agency) in 1993 as Hawaii Electric Vehicle Demonstration Project. * Mission: develop and demonstrate technologies for future military and commercial transportation systems. * One of seven regional consortia that participated in the Defense Advanced Research Projects Agency (DARPA)

  16. Common Operating and Response Environment - U.S. Air Force

    Energy Science and Technology Software Center (OSTI)

    2009-10-02

    CORE is an architecture to bridge the gaps between disparate data integration and delivery of disparate information visualization. The CORE Technology Program includes a suite of tools and user-centered staff that can facilitate rapid delivery of a deployable integrated information to users. Integration of Air Force data streams, summarizing the information and providing team members with the information they need to rapidly understand and respond.

  17. Nano-mechanics of Tunable Adhesion using Non Covalent Forces

    SciTech Connect (OSTI)

    Kenneth Liechti

    2012-09-08

    The objective of this program was to examine, via experiment and atomistic and continuum analysis, coordinated noncovalent bonding over a range of length scales with a view to obtaining modulated, patterned and reversible bonding at the molecular level. The first step in this project was to develop processes for depositing self-assembled monolayers (SAMs) bearing carboxylic acid and amine moieties on Si (111) surfaces and probe tips of an interfacial force microscope (IFM). This allowed the adhesive portion of the interactions between functionalized surfaces to be fully captured in the force-displacement response (force profiles) that are measured by the IFM. The interactionswere extracted in the form of traction-separation laws using combined molecular and continuum stress analyses. In this approach, the results of molecular dynamics analyses of SAMs subjected to simple stress states are used to inform continuum models of their stress-strain behavior. Continuum analyses of the IFM experiment were then conducted, which incorporate the stress-strain behavior of the SAMs and traction-separation relations that represent the interactions between the tip and functionalized Si surface. Agreement between predicted and measured force profiles was taken to imply that the traction-separation relations have been properly extracted. Scale up to larger contact areas was considered by forming Si/SAM/Si sandwiches and then separating them via fracture experiments. The mode 1 traction-separation relations have been extracted using fracture mechanics concepts under mode 1 and mixed-mode conditions. Interesting differences were noted between the three sets of traction-separation relations.

  18. Apparatus having reduced mechanical forces for supporting high magnetic fields

    DOE Patents [OSTI]

    Prueitt, Melvin L.; Mueller, Fred M.; Smith, James L.

    1991-01-01

    The present invention identifies several configurations of conducting elements capable of supporting extremely high magnetic fields suitable for plasma confinement, wherein forces experienced by the conducting elements are significantly reduced over those which are present as a result of the generation of such high fields by conventional techniques. It is anticipated that the use of superconducting materials will both permit the attainment of such high fields and further permit such fields to be generated with vastly improved efficiency.

  19. Direct Aerosol Forcing: Sensitivity to Uncertainty in Measurements of

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Aerosol Optical and Situational Properties Direct Aerosol Forcing: Sensitivity to Uncertainty in Measurements of Aerosol Optical and Situational Properties McComiskey, Allison CIRES / NOAA Schwartz, Stephen Brookhaven National Laboratory Ricchiazzi, Paul University of California, Santa Barbara Lewis, Ernie Brookhaven National Laboratory Michalsky, Joseph DOC/NOAA/OAR/ESRL/GMD Ogren, John NOAA/CMDL Category: Radiation Understanding sources of uncertainty in estimating aerosol direct radiative

  20. Single Column Model Simulations of Cloud Sensitivity to Forcing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Single-Column Model Simulations of Cloud Sensitivity to Forcing A. D. Del Genio National Aeronautics and Space Administration Goddard Institute for Space Studies New York, New York A. B. Wolf National Aeronautics and Space Administration SGT, Inc., Goddard Institute for Space Studies New York, New York Introduction The Atmospheric Radiation Measurement (ARM) Program single-column modeling (SCM) framework has to date used several fairly brief intensive observing periods (IOPs) to evaluate the

  1. Climate System Response to External Forcings and Climate Change Projections

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    in CCSM4 | Argonne Leadership Computing Facility Climate System Response to External Forcings and Climate Change Projections in CCSM4 Authors: Meehl, G.A., Washington, WM, Arblaster, JM, Hu, A., Teng, H., Tebaldi, C., White III, J.B., Strand Jr., WG Results are presented from experiments performed with the Community Climate System Model version 4 (CCSM4) for the Coupled Model Intercomparison Project phase 5 (CMIP5). These include multiple ensemble members of 20th century climate with

  2. A new ion sensing deep atomic force microscope

    SciTech Connect (OSTI)

    Drake, Barney; Randall, Connor; Bridges, Daniel; Hansma, Paul K.

    2014-08-15

    Here we describe a new deep atomic force microscope (AFM) capable of ion sensing. A novel probe assembly incorporates a micropipette that can be used both for sensing ion currents and as the tip for AFM imaging. The key advance of this instrument over previous ion sensing AFMs is that it uses conventional micropipettes in a novel suspension system. This paper focuses on sensing the ion current passively while using force feedback for the operation of the AFM in contact mode. Two images are obtained simultaneously: (1) an AFM topography image and (2) an ion current image. As an example, two images of a MEMS device with a microchannel show peaks in the ion current as the pipette tip goes over the edges of the channel. This ion sensing AFM can also be used in other modes including tapping mode with force feedback as well as in non-contact mode by utilizing the ion current for feedback, as in scanning ion conductance microscopy. The instrument is gentle enough to be used on some biological samples such as plant leaves.

  3. Ponderomotive force in the presence of electric fields

    SciTech Connect (OSTI)

    Khazanov, G. V.; Krivorutsky, E. N.

    2013-02-15

    This paper presents averaged equations of particle motion in an electromagnetic wave of arbitrary frequency with its wave vector directed along the ambient magnetic field. The particle is also subjected to an E(vector sign) Multiplication-Sign B(vector sign) drift and a background electric field slowly changing in space and acting along the magnetic field line. The fields, wave amplitude, and the wave vector depend on the coordinate along the magnetic field line. The derivations of the ponderomotive forces are done by assuming that the drift velocity in the ambient magnetic field is comparable to the particle velocity. Such a scenario leads to new ponderomotive forces, dependent on the wave magnetic field intensity, and, as a result, to the additional energy exchange between the wave and the plasma particles. It is found that the parallel electric field can lead to the change of the particle-wave energy exchange rate comparable to that produced by the previously discussed ponderomotive forces.

  4. Nonlinear resonances and antiresonances of a forced sonic vacuum

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Pozharskiy, D.; Zhang, Y.; Williams, M. O.; McFarland, D. M.; Kevrekidis, P. G.; Vakakis, A. F.; Kevrekidis, I. G.

    2015-12-23

    We consider a harmonically driven acoustic medium in the form of a (finite length) highly nonlinear granular crystal with an amplitude- and frequency-dependent boundary drive. Despite the absence of a linear spectrum in the system, we identify resonant periodic propagation whereby the crystal responds at integer multiples of the drive period and observe that this can lead to local maxima of transmitted force at its fixed boundary. In addition, we identify and discuss minima of the transmitted force (“antiresonances”) between these resonances. Representative one-parameter complex bifurcation diagrams involve period doublings and Neimark-Sacker bifurcations as well as multiple isolas (e.g., ofmore » period-3, -4, or -5 solutions entrained by the forcing). We combine them in a more detailed, two-parameter bifurcation diagram describing the stability of such responses to both frequency and amplitude variations of the drive. This picture supports a notion of a (purely) “nonlinear spectrum” in a system which allows no sound wave propagation (due to zero sound speed: the so-called sonic vacuum). As a result, we rationalize this behavior in terms of purely nonlinear building blocks: apparent traveling and standing nonlinear waves.« less

  5. Nonlinear resonances and antiresonances of a forced sonic vacuum

    SciTech Connect (OSTI)

    Pozharskiy, D.; Zhang, Y.; Williams, M. O.; McFarland, D. M.; Kevrekidis, P. G.; Vakakis, A. F.; Kevrekidis, I. G.

    2015-12-23

    We consider a harmonically driven acoustic medium in the form of a (finite length) highly nonlinear granular crystal with an amplitude- and frequency-dependent boundary drive. Despite the absence of a linear spectrum in the system, we identify resonant periodic propagation whereby the crystal responds at integer multiples of the drive period and observe that this can lead to local maxima of transmitted force at its fixed boundary. In addition, we identify and discuss minima of the transmitted force (“antiresonances”) between these resonances. Representative one-parameter complex bifurcation diagrams involve period doublings and Neimark-Sacker bifurcations as well as multiple isolas (e.g., of period-3, -4, or -5 solutions entrained by the forcing). We combine them in a more detailed, two-parameter bifurcation diagram describing the stability of such responses to both frequency and amplitude variations of the drive. This picture supports a notion of a (purely) “nonlinear spectrum” in a system which allows no sound wave propagation (due to zero sound speed: the so-called sonic vacuum). As a result, we rationalize this behavior in terms of purely nonlinear building blocks: apparent traveling and standing nonlinear waves.

  6. Secondary structure of rat and human amylin across force fields

    SciTech Connect (OSTI)

    Hoffmann, Kyle Quynn; McGovern, Michael; Chiu, Chi -cheng; de Pablo, Juan J.; Paci, Emanuele

    2015-07-29

    The aggregation of human amylin has been strongly implicated in the progression of Type II diabetes. This 37-residue peptide forms a variety of secondary structures, including random coils, α-helices, and β-hairpins. The balance between these structures depends on the chemical environment, making amylin an ideal candidate to examine inherent biases in force fields. Rat amylin differs from human amylin by only 6 residues; however, it does not form fibrils. Therefore it provides a useful complement to human amylin in studies of the key events along the aggregation pathway. In this work, the free energy of rat and human amylin was determined as a function of α-helix and β-hairpin content for the Gromos96 53a6, OPLS-AA/L, CHARMM22/CMAP, CHARMM22*, Amberff99sb*-ILDN, and Amberff03w force fields using advanced sampling techniques, specifically bias exchange metadynamics. This work represents a first systematic attempt to evaluate the conformations and the corresponding free energy of a large, clinically relevant disordered peptide in solution across force fields. The NMR chemical shifts of rIAPP were calculated for each of the force fields using their respective free energy maps, allowing us to quantitatively assess their predictions. We show that the predicted distribution of secondary structures is sensitive to the choice of force-field: Gromos53a6 is biased towards β-hairpins, while CHARMM22/CMAP predicts structures that are overly α-helical. OPLS-AA/L favors disordered structures. Amberff99sb*-ILDN, AmberFF03w and CHARMM22* provide the balance between secondary structures that is most consistent with available experimental data. In contrast to previous reports, our findings suggest that the equilibrium conformations of human and rat amylin are remarkably similar, but that subtle differences arise in transient alpha-helical and beta-strand containing structures that the human peptide can more readily adopt. We hypothesize that these transient states enable

  7. Secondary structure of rat and human amylin across force fields

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Hoffmann, Kyle Quynn; McGovern, Michael; Chiu, Chi -cheng; de Pablo, Juan J.; Paci, Emanuele

    2015-07-29

    The aggregation of human amylin has been strongly implicated in the progression of Type II diabetes. This 37-residue peptide forms a variety of secondary structures, including random coils, α-helices, and β-hairpins. The balance between these structures depends on the chemical environment, making amylin an ideal candidate to examine inherent biases in force fields. Rat amylin differs from human amylin by only 6 residues; however, it does not form fibrils. Therefore it provides a useful complement to human amylin in studies of the key events along the aggregation pathway. In this work, the free energy of rat and human amylin wasmore » determined as a function of α-helix and β-hairpin content for the Gromos96 53a6, OPLS-AA/L, CHARMM22/CMAP, CHARMM22*, Amberff99sb*-ILDN, and Amberff03w force fields using advanced sampling techniques, specifically bias exchange metadynamics. This work represents a first systematic attempt to evaluate the conformations and the corresponding free energy of a large, clinically relevant disordered peptide in solution across force fields. The NMR chemical shifts of rIAPP were calculated for each of the force fields using their respective free energy maps, allowing us to quantitatively assess their predictions. We show that the predicted distribution of secondary structures is sensitive to the choice of force-field: Gromos53a6 is biased towards β-hairpins, while CHARMM22/CMAP predicts structures that are overly α-helical. OPLS-AA/L favors disordered structures. Amberff99sb*-ILDN, AmberFF03w and CHARMM22* provide the balance between secondary structures that is most consistent with available experimental data. In contrast to previous reports, our findings suggest that the equilibrium conformations of human and rat amylin are remarkably similar, but that subtle differences arise in transient alpha-helical and beta-strand containing structures that the human peptide can more readily adopt. We hypothesize that these transient states

  8. Manipulation of polystyrene nanoparticles on a silicon wafer in the peak force tapping mode in water: pH-dependent friction and adhesion force

    SciTech Connect (OSTI)

    Schiwek, Simon; Stark, Robert W. E-mail: dietz@csi.tu-darmstadt.de; Dietz, Christian E-mail: dietz@csi.tu-darmstadt.de; Heim, Lars-Oliver

    2015-03-14

    The friction force between nanoparticles and a silicon wafer is a crucial parameter for cleaning processes in the semiconductor industry. However, little is known about the pH-dependency of the friction forces and the shear strength at the interface. Here, we push polystyrene nanoparticles, 100 nm in diameter, with the tip of an atomic force microscope and measure the pH-dependency of the friction, adhesion, and normal forces on a silicon substrate covered with a native silicon dioxide layer. The peak force tapping mode was applied to control the vertical force on these particles. We successively increased the applied load until the particles started to move. The main advantage of this technique over single manipulation processes is the achievement of a large number of manipulation events in short time and in a straightforward manner. Geometrical considerations of the interaction forces at the tip-particle interface allowed us to calculate the friction force and shear strength from the applied normal force depending on the pH of an aqueous solution. The results clearly demonstrated that particle removal should be performed with a basic solution at pH 9 because of the low interaction forces between particle and substrate.

  9. Impact assessment of land use planning driving forces on environment

    SciTech Connect (OSTI)

    Chen, Longgao; Yang, Xiaoyan; Chen, Longqian; Li, Long

    2015-11-15

    Land use change may exert a negative impact on environmental quality. A state–impact–state (SIS) model describing a state transform under certain impacts has been integrated into land use planning (LUP) environmental impact assessment (LUPEA). This logical model is intuitive and easy to understand, but the exploration of impact is essential to establish the indicator system and to identify the scope of land use environmental impact when it is applied to a specific region. In this study, we investigated environmental driving forces from land use planning (LUPF), along with the conception, components, scope, and impact of LUPF. This method was illustrated by a case study in Zoucheng, China. Through the results, we concluded that (1) the LUPF on environment are impacts originated from the implementation of LUP on a regional environment, which are characterized by four aspects: magnitude, direction, action point, and its owner; (2) various scopes of LUPF on individual environmental elements based on different standards jointly define the final scope of LUPEA; (3) our case study in Zoucheng demonstrates the practicability of this proposed approach; (4) this method can be embedded into LUPEA with direction, magnitudes, and scopes of the LUPF on individual elements obtained, and the identified indicator system can be directly employed into LUPEA and (5) the assessment helps to identify key indicators and to set up a corresponding strategy to mitigate the negative impact of LUP on the environment, which are two important objectives of strategic environmental assessment (SEA) in LUP. - Highlights: • Environmental driving forces from land use planning (LUPF) are investigated and categorized. • Our method can obtains the direction, magnitudes and scopes of environmental driving forces. • The LUPEA scope is determined by the combination of various scopes of LUPF on individual elements. • LUPF assessment can be embedded into LUPEA. • The method can help to

  10. The cooperative monitoring of military forces: An exercise in strategy

    SciTech Connect (OSTI)

    1998-04-01

    This exercise examines a hypothetical security problem associated with conventional military forces and border security: a surprise attack. The goal of the exercise is to provide an opportunity to think about how cooperative monitoring can be part of regional security. Two hypothetical countries, VOLCANOES and MOUNTAINS, have been created for this exercise based on the US states of Arizona and New Mexico. They were selected for their size and variety of terrain. Hypothetical background information and characteristics of the two countries are provided. An outline of activities is given, including prioritization of security concerns and monitoring of objectives for security concerns. 6 tabs.

  11. Born on an Air Force base in Mississippi, Jan never

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    on an Air Force base in Mississippi, Jan never lived any place for more than three years as a child. Her family moved to Germany when she was seven, and she recalls trips all over Europe. "We visited Holland, camped in Italy for a summer, and toured numerous museums and castles. My dad had been a pilot in World War II and Korea, and he took us to Hitler's Eagle's Nest retreat, and even to the Dachau concentration camp. These made extremely strong impressions of the influences of cultural

  12. Entanglement entropy of two black holes and entanglement entropic force

    SciTech Connect (OSTI)

    Shiba, Noburo

    2011-03-15

    We study the entanglement entropy S{sub C} of the massless free scalar field on the outside region C of two black holes A and B whose radii are R{sub 1} and R{sub 2} and how it depends on the distance r(>>R{sub 1},R{sub 2}) between two black holes. If we can consider the entanglement entropy as thermodynamic entropy, we can see the entropic force acting on the two black holes from the r dependence of S{sub C}. We develop the computational method based on that of Bombelli et al. to obtain the r dependence of S{sub C} of scalar fields whose Lagrangian is quadratic with respect to the scalar fields. First, we study S{sub C} in (d+1)-dimensional Minkowski spacetime. In this case the state of the massless free scalar field is the Minkowski vacuum state, and we replace two black holes by two imaginary spheres and take the trace over the degrees of freedom residing in the imaginary spheres. We obtain the leading term of S{sub C} with respect to 1/r. The result is S{sub C}=S{sub A}+S{sub B}+(1/r{sup 2d-2})G(R{sub 1},R{sub 2}), where S{sub A} and S{sub B} are the entanglement entropy on the inside region of A and B, respectively, and G(R{sub 1},R{sub 2}){<=}0. We do not calculate G(R{sub 1},R{sub 2}) in detail, but we show how to calculate it. In the black hole case we use the method used in the Minkowski spacetime case with some modifications. We show that S{sub C} can be expected to be the same form as that in the Minkowski spacetime case. But in the black hole case, S{sub A} and S{sub B} depend on r, so we do not fully obtain the r dependence of S{sub C}. Finally, we assume that the entanglement entropy can be regarded as thermodynamic entropy and consider the entropic force acting on two black holes. We argue how to separate the entanglement entropic force from other forces and how to cancel S{sub A} and S{sub B} whose r dependences are not obtained. Then we obtain the physical prediction, which can be tested experimentally in principle.

  13. B&W Y-12 assumes responsibility for protective force | Y-12 National...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    assumes ... B&W Y-12 assumes responsibility for protective force Posted: October 29, 2012 - 4:30pm B&W Y-12 has assumed responsibility for the protective force at the Y-12 National ...

  14. NNSA, Air Force Conduct Successful W87/Minuteman III Joint Flight...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NNSA, Air Force Conduct Successful W87Minuteman III Joint Flight Test March 01, 2012 WASHINGTON, D.C. - The National Nuclear Security Administration (NNSA) and the U.S. Air Force ...

  15. A Reactive Force Field study of Li/C Systems for Electrical Energy...

    Office of Scientific and Technical Information (OSTI)

    A Reactive Force Field study of LiC Systems for Electrical Energy Storage Citation Details In-Document Search Title: A Reactive Force Field study of LiC Systems for Electrical ...

  16. Physicists hunt for dark forces at Jefferson Lab ( Nature) | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    hunt for dark forces at Jefferson Lab ( Nature) External Link: http://www.nature.com/news/physicists-hunt-for-dark-forces-1.10386 By jlab_admin on Tue, 2012-04-03

  17. Solar Community Comes Out in Full Force for SunShot Grand Challenge...

    Energy Savers [EERE]

    Solar Community Comes Out in Full Force for SunShot Grand Challenge Summit Solar Community Comes Out in Full Force for SunShot Grand Challenge Summit May 22, 2014 - 9:58am Addthis ...

  18. Spin-Flavor van der Waals Forces and NN interaction (Conference...

    Office of Scientific and Technical Information (OSTI)

    Title: Spin-Flavor van der Waals Forces and NN interaction A major goal in Nuclear Physics ... Because of this the resulting nuclear forces at sufficiently large distances correspond to ...

  19. Development of a quartz tuning-fork-based force sensor for measurements in the tens of nanoNewton force range during nanomanipulation experiments

    SciTech Connect (OSTI)

    Oiko, V. T. A. Rodrigues, V.; Ugarte, D.; Martins, B. V. C.; Silva, P. C.

    2014-03-15

    Understanding the mechanical properties of nanoscale systems requires new experimental and theoretical tools. In particular, force sensors compatible with nanomechanical testing experiments and with sensitivity in the nN range are required. Here, we report the development and testing of a tuning-fork-based force sensor for in situ nanomanipulation experiments inside a scanning electron microscope. The sensor uses a very simple design for the electronics and it allows the direct and quantitative force measurement in the 1100 nN force range. The sensor response is initially calibrated against a nN range force standard, as, for example, a calibrated Atomic Force Microscopy cantilever; subsequently, applied force values can be directly derived using only the electric signals generated by the tuning fork. Using a homemade nanomanipulator, the quantitative force sensor has been used to analyze the mechanical deformation of multi-walled carbon nanotube bundles, where we analyzed forces in the 540 nN range, measured with an error bar of a few nN.

  20. The Secretary of Energy Advisory Board (SEAB) Task Force on Methane

    Energy Savers [EERE]

    Hydrates | Department of Energy Methane Hydrates The Secretary of Energy Advisory Board (SEAB) Task Force on Methane Hydrates The Secretary of Energy Advisory Board (SEAB) Task Force on Methane Hydrates is composed of SEAB members and independent experts charged with recommending a framework for DOE methane hydrate research programs. Purpose of the Task Force: The purpose of this task force is to provide a framework for DOE's pre-commercial methane hydrate research effort, in particular, the

  1. ProForce marks 65 years protecting Sandia resources, facilities, people |

    National Nuclear Security Administration (NNSA)

    National Nuclear Security Administration | (NNSA) ProForce marks 65 years protecting Sandia resources, facilities, people Monday, October 26, 2015 - 12:00am NNSA Blog Current and former members of the Lab's Protective Force gathered to reflect on and recognize the contributions ProForce has made to securing Sandia National Laboratory's resources, facilities, and people. Over the past 65 years, the force has changed in size and structure but its mission has remained the same: To ensure the

  2. Interagency Task Force on Carbon Capture and Storage | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Interagency Task Force on Carbon Capture and Storage Interagency Task Force on Carbon Capture and Storage On February 3, 2010, President Obama sent a memorandum to the heads of fourteen Executive Departments and Federal Agencies establishing an Interagency Task Force on Carbon Capture and Storage. The goal was to develop a comprehensive and coordinated Federal strategy to speed the commercial development and deployment of clean coal technologies. The Task Force, co-chaired by the Department of

  3. Interim Report of the Task Force on DOE National Laboratories | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Interim Report of the Task Force on DOE National Laboratories Interim Report of the Task Force on DOE National Laboratories The SEAB Task Force on DOE National Laboratories was established by the Secretary of Energy on June 16, 2014, to provide advice, guidance, and recommendations on important issues related to improving the health and management of the labs. The Task Force has been charged to review past studies, Congressional reports and direction, and Departmental deliberations

  4. Secretary of Energy Advisory Board (SEAB) Task Force on EM Technology Development

    Broader source: Energy.gov [DOE]

    Presentation from the 2015 DOE National Cleanup Workshop by Gerald Boyd, Vice President, Stoller Newport News Nuclear; Task Force Member.

  5. THE EMPLOYEE'S GUIDE TO BENEFITS FOR THOSE AFFECTED BY REDUCTION IN FORCE

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EMPLOYEE'S THE EMPLOYEE'S THE EMPLOYEE'S THE EMPLOYEE'S GUIDE TO BENEFITS GUIDE TO BENEFITS GUIDE TO BENEFITS GUIDE TO BENEFITS FOR THOSE FOR THOSE FOR THOSE FOR THOSE AFFECTED BY AFFECTED BY AFFECTED BY AFFECTED BY REDUCTION IN REDUCTION IN REDUCTION IN REDUCTION IN FORCE FORCE FORCE FORCE U.S. OFFICE OF U.S. OFFICE OF U.S. OFFICE OF U.S. OFFICE OF PERSONNEL MANAGEMENT PERSONNEL MANAGEMENT PERSONNEL MANAGEMENT PERSONNEL MANAGEMENT WORKFORCE WORKFORCE WORKFORCE WORKFORCE RESTRUCTURING OFFICE

  6. Development of Integrated ASR Model Forcing Data and Their Applications to

    Office of Scientific and Technical Information (OSTI)

    Improve CAM (Technical Report) | SciTech Connect Development of Integrated ASR Model Forcing Data and Their Applications to Improve CAM Citation Details In-Document Search Title: Development of Integrated ASR Model Forcing Data and Their Applications to Improve CAM In this project, we have (1) improved the constrained variational analysis algorithm of ARM model forcing data, and (2) used the ARM forcing data to identify systematic biases in clouds and radiation in the CAM5 and design new

  7. U.S. Air Force Energy Program Presentation | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    U.S. Air Force Energy Program Presentation U.S. Air Force Energy Program Presentation Omar Mendoza, U.S. Air Force, presentation on the U.S. Air Force Energy Program at the Advanced Biofuels Industry Roundtable. 6_mendoza_roundtable.pdf (522.6 KB) More Documents & Publications Advanced Biofuels Industry Roundtable - List of Participants Advanced Drop-In Biofuels Initiative Agenda Airlines & Aviation Alternative Fuels: Our Drive to Be Early Market Adopters

  8. January 6, 2014 SEAB FracFocus 2.0 Task Force Meeting

    Broader source: Energy.gov [DOE]

    SECRETARY OF ENERGY ADVISORY BOARDFRACFOCUS 2.0 TASK FORCE MEETINGJanuary 6, 20141000 Independence Avenue, SW, Washington, DC

  9. Comprehensive Energy Program at Patrick Air Force Base Set to Exceed Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Goals | Department of Energy Comprehensive Energy Program at Patrick Air Force Base Set to Exceed Energy Goals Comprehensive Energy Program at Patrick Air Force Base Set to Exceed Energy Goals Federal Energy Management Program case study focuses on Patrick Air Force Base's use of a utility energy services contract to achieve its energy goals. Download the Patrick Air Force Base case study. (709.94 KB) More Documents & Publications FPL Energy Services ESCO Qualification Sheet UESC Project

  10. Choosing the forcing terms in an inexact Newton method

    SciTech Connect (OSTI)

    Eisenstat, S.C.; Walker, H.F.

    1994-12-31

    An inexact Newton method is a generalization of Newton`s method for solving F(x) = 0, F: {Re}{sup n} {r_arrow} {Re}{sup n}, in which each step reduces the norm of the local linear model of F. At the kth iteration, the norm reduction is usefully expressed by the inexact Newton condition where x{sub k} is the current approximate solution and s{sub k} is the step. In many applications, an {eta}{sub k} is first specified, and then an S{sub k} is found for which the inexact Newton condition holds. Thus {eta}{sub k} is often called a {open_quotes}forcing term{close_quotes}. In practice, the choice of the forcing terms is usually critical to the efficiency of the method and can affect robustness as well. Here, the authors outline several promising choices, discuss theoretical support for them, and compare their performance in a Newton iterative (truncated Newton) method applied to several large-scale problems.

  11. Sandia-Power Surety Task Force Hawaii foam analysis.

    SciTech Connect (OSTI)

    McIntyre, Annie

    2010-11-01

    The Office of Secretary of Defense (OSD) Power Surety Task Force was officially created in early 2008, after nearly two years of work in demand reduction and renewable energy technologies to support the Warfighter in Theater. The OSD Power Surety Task Force is tasked with identifying efficient energy solutions that support mission requirements. Spray foam insulation demonstrations were recently expanded beyond field structures to include military housing at Ft. Belvoir. Initial results to using the foam in both applications are favorable. This project will address the remaining key questions: (1) Can this technology help to reduce utility costs for the Installation Commander? (2) Is the foam cost effective? (3) What application differences in housing affect those key metrics? The critical need for energy solutions in Hawaii and the existing relationships among Sandia, the Department of Defense (DOD), the Department of Energy (DOE), and Forest City, make this location a logical choice for a foam demonstration. This project includes application and analysis of foam to a residential duplex at the Waikulu military community on Oahu, Hawaii, as well as reference to spray foam applied to a PACOM facility and additional foamed units on Maui, conducted during this project phase. This report concludes the analysis and describes the utilization of foam insulation at military housing in Hawaii and the subsequent data gathering and analysis.

  12. Placement and efficiency effects on radiative forcing of solar installations

    SciTech Connect (OSTI)

    Burg, Brian R.; Ruch, Patrick; Paredes, Stephan; Michel, Bruno

    2015-09-28

    The promise for harnessing solar energy being hampered by cost, triggered efforts to reduce them. As a consequence low-efficiency, low-cost photovoltaics (PV) panels prevail. Conversely, in the traditional energy sector efficiency is extremely important due to the direct costs associated to fuels. This also affects solar energy due to the radiative forcing caused by the dark solar panels. In this paper we extend the concept of energy payback time by including the effect of albedo change, which gives a better assessment of the system sustainability. We present an analysis on the short and medium term climate forcing effects of different solar collectors in Riyadh, Saudi Arabia and demonstrate that efficiency is important to reduce the collector area and cost. This also influences the embodied energy and the global warming potential. We show that a placement of a high concentration photovoltaic thermal solar power station outside of the city using a district cooling system has a double beneficial effect since it improves the solar conversion efficiency and reduces the energy demand for cooling in the city. We also explain the mechanisms of the current economic development of solar technologies and anticipate changes.

  13. Temperature evolution of electromotive force from Pt on yttrium-iron-garnet under ferromagnetic resonance

    SciTech Connect (OSTI)

    Ohshima, Ryo; Emoto, Hiroyuki; Shinjo, Teruya; Ando, Yuichiro; Shiraishi, Masashi

    2015-05-07

    Temperature evolution of electromotive force from Pt due to the inverse spin Hall effect is studied. Pure spin current is injected from yttrium-iron-garnet by using spin pumping technique. The electromotive force from the Pt monotonically decreases with decreasing temperature, and it is showed that there is a deviation between the measured and the calculated electromotive forces.

  14. Non-Kyoto Radiative Forcing in Long-Run Greenhouse Gas Emissions and Climate Change Scenarios

    SciTech Connect (OSTI)

    Rose, Steven K.; Richels, Richard G.; Smith, Steven J.; Riahi, Keywan; Stefler, Jessica; Van Vuuren, Detlef

    2014-04-27

    Climate policies designed to achieve climate change objectives must consider radiative forcing from the Kyoto greenhouse gas, as well as other forcing constituents, such as aerosols and tropospheric ozone. Net positive forcing leads to global average temperature increases. Modeling of non-Kyoto forcing is a relatively new component of climate management scenarios. Five of the nineteen models in the EMF-27 Study model both Kyoto and non-Kyoto forcing. This paper describes and assesses current non-Kyoto radiative forcing modeling within these integrated assessment models. The study finds negative forcing from aerosols masking significant positive forcing in reference non-climate policy projections. There are however large differences across models in projected non-Kyoto emissions and forcing, with differences stemming from differences in relationships between Kyoto and non-Kyoto emissions and fundamental differences in modeling structure and assumptions. Air pollution and non-Kyoto forcing decline in the climate policy scenarios. However, non-Kyoto forcing appears to be influencing mitigation results, including allowable carbon dioxide emissions, and further evaluation is merited. Overall, there is substantial uncertainty related to non-Kyoto forcing that must be considered.

  15. Laboratory measurement verification of laser hazard analysis for miles weapon simulators used in force on force exercises.

    SciTech Connect (OSTI)

    Augustoni, Arnold L.

    2006-08-01

    Due to the change in the batteries used with the Small Arm Laser Transmitters (SALT) from 3-volts dc to 3.6-volts dc and changes to SNL MILES operating conditions, the associated laser hazards of these units required re-evaluation to ensure that the hazard classification of the laser emitters had not changed as well. The output laser emissions of the SNL MILES, weapon simulators and empire guns, used in Force-On-Force (FOF) training exercises, was measured in accordance to the ANSI Standard Z136.4-2005, ''Recommended Practice for Laser Safety Measurements for Hazard Evaluation''. The laser hazard class was evaluated in accordance with the ANSI Standard Z136.1-2000, ''Safe Use of Lasers'', using ''worst'' case conditions associated with these MILES units. Laser safety assessment was conducted in accordance with the ANSI Standard Z136.6-2005, ''Safe Use of Lasers Outdoors''. The laser hazard evaluation of these MILES laser emitters was compared to and supersedes SAND Report SAND2002-0246, ''Laser Safety Evaluation of the MILES and Mini MILES Laser Emitting Components'', which used ''actual'' operating conditions of the laser emitters at the time of its issuance.

  16. Global Distribution and Climate Forcing of Marine Organic Aerosol - Part 2: Effects on Cloud Properties and Radiative Forcing

    SciTech Connect (OSTI)

    Gantt, Brett; Xu, Jun; Meskhidze, N.; Zhang, Yang; Nenes, Athanasios; Ghan, Steven J.; Liu, Xiaohong; Easter, Richard C.; Zaveri, Rahul A.

    2012-07-25

    A series of simulations with the Community Atmosphere Model version 5 (CAM5) with a 7-mode Modal Aerosol Model were conducted to assess the changes in cloud microphysical properties and radiative forcing resulting from marine organic aerosols. Model simulations show that the anthropogenic aerosol indirect forcing (AIF) predicted by CAM5 is decreased in absolute magnitude by up to 0.09 Wm{sup -2} (7 %) when marine organic aerosols are included. Changes in the AIF from marine organic aerosols are associated with small global increases in low-level incloud droplet number concentration and liquid water path of 1.3 cm{sup -3} (1.5 %) and 0.22 gm{sup -2} (0.5 %), respectively. Areas especially sensitive to changes in cloud properties due to marine organic aerosol include the Southern Ocean, North Pacific Ocean, and North Atlantic Ocean, all of which are characterized by high marine organic emission rates. As climate models are particularly sensitive to the background aerosol concentration, this small but non-negligible change in the AIF due to marine organic aerosols provides a notable link for ocean-ecosystem marine low-level cloud interactions and may be a candidate for consideration in future earth system models.

  17. Lieb-Liniger gas in a constant-force potential

    SciTech Connect (OSTI)

    Jukic, D.; Galic, S.; Buljan, H.; Pezer, R.

    2010-08-15

    We use Gaudin's Fermi-Bose mapping operator to calculate exact solutions for the Lieb-Liniger model in a linear (constant-force) potential (the constructed exact stationary solutions are referred to as the Lieb-Liniger-Airy wave functions). The ground-state properties of the gas in the wedgelike trapping potential are calculated in the strongly interacting regime by using Girardeau's Fermi-Bose mapping and the pseudopotential approach in the 1/c approximation (c denotes the strength of the interaction). We point out that quantum dynamics of Lieb-Liniger wave packets in the linear potential can be calculated by employing an N-dimensional Fourier transform as in the case of free expansion.

  18. Technology requirements for high-power Lithium Lorentz Force accelerators

    SciTech Connect (OSTI)

    Polk, J.; Frisbee, R.; Krauthamer, S.; Tikhonov, V.; Semenikhin, S.; Kim, V.

    1997-01-01

    Lithium Lorentz Force Accelerators (LFA{close_quote}s) are capable of processing very high power levels and are therefore applicable to a wide range of challenging missions. An analysis of a reusable orbit transfer vehicle with a solar or nuclear electric power source was performed to assess the applicability of high-power LFA{close_quote}s to this mission and to define engine performance and lifetime goals to help guide the technology development program. For this class of missions, the emphasis must be on achieving high efficiency at an Isp of 4000{endash}5000 s at power levels of 200{endash}250 kWe. The engines must demonstrate very reliable operation for a service life of about 3000 hours. These goals appear to be achievable with engine technologies currently under development. {copyright} {ital 1997 American Institute of Physics.}

  19. Response of the GISS GCM to prescribed forcings

    SciTech Connect (OSTI)

    Borenstein, S.R.

    1996-12-31

    The Global Circulation Model or GCM is a computer simulation of the Earth`s climate, used to predict future weather and climate from present conditions and known forcings. The GCM is a Cartesian grid-point model, run at a resolution of 4{degree}x5{degree} in the horizontal (latitude x longitude) and nine-layers in the vertical. The crucial question is: How accurately and reliably can this be done, given the extreme complication and non-linearity of the system being modelled as well as the intrinsically chaotic nature of the climate. One of the long term goals of the GCM is to predict the effect of anthropogenic greenhouse gases on the future climate. Comparative images representing the model simulations and observations of surface temperatures and precipitation are shown. By comparing the model data to real world observations, the GCM can be evaluated, criticized and ultimately modified to produce more realistic results.

  20. Molecular dynamics simulations of methane hydrate using polarizable force fields

    SciTech Connect (OSTI)

    Jiang, H.N.; Jordan, K.D.; Taylor, C.E.

    2007-03-01

    Molecular dynamics simulations of methane hydrate have been carried out using the AMOEBA and COS/G2 polarizable force fields. Properties examined include the temperature dependence of the lattice constant, the OC and OO radial distribution functions and the vibrational spectra. Both the AMOEBA and COS/G2 models are found to successfully account for the available experimental data, with overall slightly better agreement with experiment being found for the AMOEBA model. Several properties calculated using the AMOEBA and COS/G2 models differ appreciable from the corresponding results obtained previously using the polarizable TIP4P-FQ model. This appears to be due to the inadequacy of the treatment of polarization, especially, the restriction of polarization to in-plane only, in the TIP4P-FQ model.

  1. An Electromotive Force Measurement System for Alloy Fuels

    SciTech Connect (OSTI)

    Changhu Xing; Colby Jensen; Heng Ban; Robert Mariani; J. Rory Kennedy

    2010-11-01

    The development of advanced nuclear fuels requires a better understanding of the transmutation and micro-structural evolution of the materials. Alloy fuels have the advantage of high thermal conductivity and improved characteristics in fuel-cladding chemical reaction. However, information on thermodynamic and thermophysical properties is limited. The objective of this project is to design and build an experimental system to measure the thermodynamic properties of solid materials from which the understanding of their phase change can be determined. The apparatus was used to measure the electromotive force (EMF) of several materials in order to calibrate and test the system. The EMF of chromel was measured from 100C to 800C and compared with theoretical values. Additionally, the EMF measurement of Ni-Fe alloy was performed and compared with the Ni-Fe phase diagram. The prototype system is to be modified eventually and used in a radioactive hot-cell in the future.

  2. Annual training manual for security training: Protective force

    SciTech Connect (OSTI)

    Not Available

    1990-10-01

    Westinghouse is committed to high quality training relevant to the need of the Protective Forces at the Waste Isolation Pilot Plant (WIPP). The training programs at WIPP are designed to qualify Security personnel to perform WIPP security missions in a professional and responsible manner. The program consists of basic as well as sustainment training, as further described in this plan. This plan documents the WIPP Security training program for security personnel for calendar year 1990. The programs detailed in this plan are designed to adequately train persons to ensure the uninterrupted continuity of Department of Energy (DOE)/Westinghouse operations. The Security Training Program consists of four basic elements. These elements are (1) basic level training; (2) on-the-job training; (3) refresher training; and (4) in-service training.

  3. Force measuring valve assemblies, systems including such valve assemblies and related methods

    DOE Patents [OSTI]

    DeWall, Kevin George; Garcia, Humberto Enrique; McKellar, Michael George

    2012-04-17

    Methods of evaluating a fluid condition may include stroking a valve member and measuring a force acting on the valve member during the stroke. Methods of evaluating a fluid condition may include measuring a force acting on a valve member in the presence of fluid flow over a period of time and evaluating at least one of the frequency of changes in the measured force over the period of time and the magnitude of the changes in the measured force over the period of time to identify the presence of an anomaly in a fluid flow and, optionally, its estimated location. Methods of evaluating a valve condition may include directing a fluid flow through a valve while stroking a valve member, measuring a force acting on the valve member during the stroke, and comparing the measured force to a reference force. Valve assemblies and related systems are also disclosed.

  4. GravitoMagnetic force in modified Newtonian dynamics

    SciTech Connect (OSTI)

    Exirifard, Qasem

    2013-08-01

    We introduce the Gauge Vector-Tensor (GVT) theory by extending the AQUAL's approach to the GravitoElectroMagnetism (GEM) approximation of gravity. GVT is a generally covariant theory of gravity composed of a pseudo Riemannian metric and two U(1) gauge connections that reproduces MOND in the limit of very weak gravitational fields while remains consistent with the Einstein-Hilbert gravity in the limit of strong and Newtonian gravitational fields. GVT also provides a simple framework to study the GEM approximation to gravity. We illustrate that the gravitomagnetic force at the edge of a galaxy can be in accord with either GVT or ?CDM but not both. We also study the physics of the GVT theory around the gravitational saddle point of the Sun and Jupiter system. We notice that the conclusive refusal of the GVT theory demands measuring either both of the gravitoelectric and gravitomagnetic fields inside the Sun-Jupiter MOND window, or the gravitoelectric field inside two different solar GVT MOND windows. The GVT theory, however, will be favored by observing an anomaly in the gravitoelectric field inside a single MOND window.

  5. Atomic force microscopy investigation of the giant mimivirus

    SciTech Connect (OSTI)

    Kuznetsov, Yuri G.; Xiao Chuan; Sun Siyang; Raoult, Didier; Rossmann, Michael; McPherson, Alexander

    2010-08-15

    Mimivirus was investigated by atomic force microscopy in its native state following serial degradation by lysozyme and bromelain. The 750-nm diameter virus is coated with a forest of glycosylated protein fibers of lengths about 140 nm with diameters 1.4 nm. Fibers are capped with distinctive ellipsoidal protein heads of estimated Mr = 25 kDa. The surface fibers are attached to the particle through a layer of protein covering the capsid, which is in turn composed of the major capsid protein (MCP). The latter is organized as an open network of hexagonal rings with central depressions separated by 14 nm. The virion exhibits an elaborate apparatus at a unique vertex, visible as a star shaped depression on native particles, but on defibered virions as five arms of 50 nm width and 250 nm length rising above the capsid by 20 nm. The apparatus is integrated into the capsid and not applied atop the icosahedral lattice. Prior to DNA release, the arms of the star disengage from the virion and it opens by folding back five adjacent triangular faces. A membrane sac containing the DNA emerges from the capsid in preparation for fusion with a membrane of the host cell. Also observed from disrupted virions were masses of distinctive fibers of diameter about 1 nm, and having a 7-nm periodicity. These are probably contained within the capsid along with the DNA bearing sac. The fibers were occasionally observed associated with toroidal protein clusters interpreted as processive enzymes modifying the fibers.

  6. Tensor Forces and the Ground-State Structure of Nuclei

    SciTech Connect (OSTI)

    Rocco Schiavilla

    2007-03-01

    Two-nucleon momentum distributions are calculated for the ground states of nuclei with mass number A {le} 8, using accurate variational Monte Carlo wave functions derived from a realistic Hamiltonian with two- and three-nucleon potentials. The momentum distribution of 'np' pairs is found to be much larger than that of 'pp' pairs for values of the relative momentum in the range (300--600) MeV/c and vanishing total momentum. This large difference, more than an order of magnitude, is seen in all nuclei considered, and has a universal character originating from the tensor components present in any realistic nucleon-nucleon potential. The correlations induced by the tensor force strongly influence the structure of 'np' pairs, which are known to be predominantly in deuteron-like states, while they are ineffective for 'pp' pairs, which are mostly in {sup 1}S{sub 0} states. These features should be easily observable in two-nucleon knock-out processes, for example in A(e,e{prime} np) and A(e,e{prime} pp) reactions.

  7. Government Applications Task Force ground truth study of WAG 4

    SciTech Connect (OSTI)

    Evers, T.K.; Smyre, J.L.; King, A.L.

    1997-06-01

    This report documents the Government Applications Task Force (GATF) Buried Waste Project. The project was initiated as a field investigation and verification of the 1994 Strategic Environmental Research and Development Program`s (SERDP) Buried Waste Identification Project results. The GATF project team included staff from three US Department of Energy (DOE) Laboratories [Oak Ridge National Laboratory (ORNL), Los Alamos National Laboratory (LANL), and the Savannah River Technology Center (SRTC)] and from the National Exploitation Laboratory. Similar studies were conducted at each of the three DOE laboratories to demonstrate the effective use of remote sensing technologies. The three locations were selected to assess differences in buried waste signatures under various environmental conditions (i.e., climate, terrain, precipitation, geology, etc.). After a brief background discussion of the SERDP Project, this report documents the field investigation (ground truth) results from the 1994--1995 GATF Buried Waste Study at ORNL`s Waste Area Grouping (WAG) 4. Figures for this report are located in Appendix A.

  8. GCM parameterization of radiative forcing by Pinatubo aerosols

    SciTech Connect (OSTI)

    Lacis, A.A.; Mishchenko, M.I.

    1996-12-31

    This paper addresses the question of whether the general circulation model (GCM) parameterization of volcanic aerosol forcing can be adequately described in terms of just two physical aerosol parameters: (1) the aerosol column optical thickness and (2) the effective radius of the aerosol size distribution. Data recorded from the eruption of Mt. Pinatubo in the Philippines in June 1991 was analyzed to attempt to answer this question. The spatial distribution of the particle size showed considerable variability and was found to increase steadily following the eruption. The time evolution of the Pinatubo aerosol particle size distribution as derived from satellite data differed significantly, particularly in the early phases of the eruption, from that assumed in the initial GCM simulation of the Pinatubo eruption. A bimodal distribution was used to examine the possibility that the actual size distribution of the volcanic aerosol was multimodal. However, results suggested that in most cases the aerosol size distribution was essentially monomodal in nature. Results from the radiative model used in the calculations are also presented. 11 refs., 6 figs.

  9. Parallel electron force balance and the L-H transition

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Stoltzfus-Dueck, T.

    2016-05-23

    In one popular paradigm for the L-H transition, energy transfer to the mean flows directly depletes turbulence fluctuation energy, resulting in suppression of the turbulence and a corresponding transport bifurcation. To quantitatively evaluate this mechanism, one must remember that electron parallel force balance couples nonzonal velocity fluctuations with electron pressure fluctuations on rapid timescales, comparable with the electron transit time. For this reason, energy in the nonzonal velocity stays in a fairly fixed ratio to the free energy in electron density fluctuations, at least for frequency scales much slower than electron transit. Furthermore, in order for direct depletion of themore » energy in turbulent fluctuations to cause the L-H transition, energy transfer via Reynolds stress must therefore drain enough energy to significantly reduce the sum of the free energy in nonzonal velocities and electron pressure fluctuations. At low k⊥, the electron thermal free energy is much larger than the energy in nonzonal velocities, posing a stark challenge for this model of the L-H transition.« less

  10. Photothermal excitation setup for a modified commercial atomic force microscope

    SciTech Connect (OSTI)

    Adam, Holger; Rode, Sebastian; Schreiber, Martin; Kühnle, Angelika; Kobayashi, Kei; Yamada, Hirofumi

    2014-02-15

    High-resolution imaging in liquids using frequency modulation atomic force microscopy is known to suffer from additional peaks in the resonance spectrum that are unrelated to the cantilever resonance. These unwanted peaks are caused by acoustic modes of the liquid and the setup arising from the indirect oscillation excitation by a piezoelectric transducer. Photothermal excitation has been identified as a suitable method for exciting the cantilever in a direct manner. Here, we present a simple design for implementing photothermal excitation in a modified Multimode scan head from Bruker. Our approach is based on adding a few components only to keep the modifications as simple as possible and to maintain the low noise level of the original setup with a typical deflection noise density of about 15 fm/√(Hz) measured in aqueous solution. The success of the modification is illustrated by a comparison of the resonance spectra obtained with piezoelectric and photothermal excitation. The performance of the systems is demonstrated by presenting high-resolution images on bare calcite in liquid as well as organic adsorbates (Alizarin Red S) on calcite with simultaneous atomic resolution of the underlying calcite substrate.

  11. Actuation of atomic force microscopy microcantilevers using contact acoustic nonlinearities

    SciTech Connect (OSTI)

    Torello, D.; Degertekin, F. Levent

    2013-11-15

    A new method of actuating atomic force microscopy (AFM) cantilevers is proposed in which a high frequency (>5 MHz) wave modulated by a lower frequency (∼300 kHz) wave passes through a contact acoustic nonlinearity at the contact interface between the actuator and the cantilever chip. The nonlinearity converts the high frequency, modulated signal to a low frequency drive signal suitable for actuation of tapping-mode AFM probes. The higher harmonic content of this signal is filtered out mechanically by the cantilever transfer function, providing for clean output. A custom probe holder was designed and constructed using rapid prototyping technologies and off-the-shelf components and was interfaced with an Asylum Research MFP-3D AFM, which was then used to evaluate the performance characteristics with respect to standard hardware and linear actuation techniques. Using a carrier frequency of 14.19 MHz, it was observed that the cantilever output was cleaner with this actuation technique and added no significant noise to the system. This setup, without any optimization, was determined to have an actuation bandwidth on the order of 10 MHz, suitable for high speed imaging applications. Using this method, an image was taken that demonstrates the viability of the technique and is compared favorably to images taken with a standard AFM setup.

  12. The parallel approach to force/position control of robotic manipulators

    SciTech Connect (OSTI)

    Chiaverini, S.; Sciavicco, L.

    1993-08-01

    Force/position control strategies provide an effective framework to deal with tasks involving interaction with the environment. In this paper the parallel approach to force/position control of robotic manipulators is presented. It allows a complete use of the available sensor measurements by operating the control action in a full-dimensional space without using selection matrices. Conflicting situations between the position and force tasks are managed using a priority strategy: the force control loop is designed to prevail over the position control loop. This choice ensures limited deviations from the prescribed force trajectory in every situation, guaranteeing automatic recovery from unplanned collisions. A dynamic force/position parallel control law is presented and its performance in presence of an elastic environment is analyzed; simplification of the dynamic control law is also discussed leading to a PID-type parallel controller. Two case studies are worked out that show the effectiveness of the approach in application to an industrial robot.

  13. Non-monotonic resonance in a spatially forced Lengyel-Epstein model

    SciTech Connect (OSTI)

    Haim, Lev; Hagberg, Aric; Meron, Ehud

    2015-06-15

    We study resonant spatially periodic solutions of the Lengyel-Epstein model modified to describe the chlorine dioxide-iodine-malonic acid reaction under spatially periodic illumination. Using multiple-scale analysis and numerical simulations, we obtain the stability ranges of 2:1 resonant solutions, i.e., solutions with wavenumbers that are exactly half of the forcing wavenumber. We show that the width of resonant wavenumber response is a non-monotonic function of the forcing strength, and diminishes to zero at sufficiently strong forcing. We further show that strong forcing may result in a π/2 phase shift of the resonant solutions, and argue that the nonequilibrium Ising-Bloch front bifurcation can be reversed. We attribute these behaviors to an inherent property of forcing by periodic illumination, namely, the increase of the mean spatial illumination as the forcing amplitude is increased.

  14. The Secretary of Energy Advisory Board (SEAB) Task Force on Next Generation

    Energy Savers [EERE]

    High Performance Computing | Department of Energy Next Generation High Performance Computing The Secretary of Energy Advisory Board (SEAB) Task Force on Next Generation High Performance Computing The Secretary of Energy Advisory Board (SEAB) Task Force on Next Generation High Performance Computing is composed of SEAB members and independent experts charged with reviewing the mission and national capabilities related to next generation high performance computing. The Task Force will examine

  15. NNSA, Air Force Complete Successful B61-12 Life Extension Program

    National Nuclear Security Administration (NNSA)

    Instrumented Flight Tests | National Nuclear Security Administration | (NNSA) Instrumented Flight Tests February 09, 2015 WASHINGTON, D.C. - The National Nuclear Security Administration (NNSA) and United States Air Force completed eight successful B61-12 Life Extension Program (LEP) Vibration Fly Around/ Instrumented Measurement Vehicle (VFA/IMV) tests at Eglin Air Force Base and Edwards Air Force Base during July to December 2014.The VFA/IMV test series collected and verified flight

  16. Pantex Protective Force hailed as "well prepared, well trained" |

    National Nuclear Security Administration (NNSA)

    National Nuclear Security Administration | (NNSA) Protective Force hailed as "well prepared, well trained" Wednesday, November 25, 2015 - 9:15am successfully completed a recent assessment by the U.S. Department Members of Pantex's Protective Force on the firing range. The Protective Force successfully completed a recent assessment by the U.S. Department of Energy's Office of Enterprise Assessments. The Pantex Plant recently hosted the U.S. Department of Energy's Office of

  17. THE EMPLOYEE'S GUIDE TO BENEFITS FOR THOSE AFFECTED BY REDUCTION IN FORCE |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy THE EMPLOYEE'S GUIDE TO BENEFITS FOR THOSE AFFECTED BY REDUCTION IN FORCE THE EMPLOYEE'S GUIDE TO BENEFITS FOR THOSE AFFECTED BY REDUCTION IN FORCE THE EMPLOYEE'S GUIDE TO BENEFITS FOR THOSE AFFECTED BY REDUCTION IN FORCE (228.35 KB) More Documents & Publications Questions and Answers POLICY GUIDANCE MEMORANDUM #39 Phased Retirement OPM Briefing on Uniformed Services Employment and Reemployment Rights Act Training

  18. Government and Industry A Force for Collaboration at the Energy Roadmap

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Update Workshop | Department of Energy Government and Industry A Force for Collaboration at the Energy Roadmap Update Workshop Government and Industry A Force for Collaboration at the Energy Roadmap Update Workshop Roadmap to Secure Control Systems in the Energy Sector Government and Industry A Force for Collaboration at the Energy Roadmap Update Workshop (72.6 KB) More Documents & Publications First-ever ieRoadmap Workshop Reviews Progress in Achieving Roadmap Goals Security is Not an

  19. Air Force general visits Pantex, Y-12 | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    News / Air Force general visits ... Air Force general visits Pantex, Y-12 Posted: August 29, 2016 - 10:40am Brig. Gen. Mike Lutton (center) tours Y 12's Beta-2E with (from left) Abe Mathews, former NNSA Principal Deputy Administrator for Military Applications Brig. Gen. Stephen L. Davis, Rick Collier of the NNSA Production Office and CNS Deputy Enterprise Manager Michelle Reichert. Air Force Brig. Gen. Michael Lutton formally took position as the National Nuclear Security Administration's new

  20. Updates on the Interagency Task Force on Natural Gas Storage Safety -

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Working with Stakeholders | Department of Energy Updates on the Interagency Task Force on Natural Gas Storage Safety - Working with Stakeholders Updates on the Interagency Task Force on Natural Gas Storage Safety - Working with Stakeholders June 7, 2016 - 1:11pm Addthis Updates on the Interagency Task Force on Natural Gas Storage Safety – Working with Stakeholders Franklin (Lynn) Orr Franklin (Lynn) Orr Under Secretary for Science and Energy Marie Therese Dominguez Marie Therese

  1. Microsoft Word - IG-0742 LLNL ProForce Supply Room 101106.doc

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... The DOE Protective Force Manual states that contractors requiring firearmsarrest authority as a function or duty are issued "Arming and Arrest Credentials with Shield" and may be ...

  2. Long distance symmetries for nuclear forces and the similarity renormalization group

    SciTech Connect (OSTI)

    Szpigel, S.; Timoteo, V. S.; Arriola, E. R.

    2013-03-25

    In this work we study the emergence of long distance symmetries for nuclear forces within the framework of the similarity renormalization group approach.

  3. The Secretary of Energy Advisory Board (SEAB) Task Force on Federal...

    Broader source: Energy.gov (indexed) [DOE]

    Management Program (FEMP) and recommending a set of actions to advance it. The Task Force's work should be based on information provided by DOE's FEMP and related programs, ...

  4. NNSA, Air Force Complete Successful B61-12 Life Extension Program...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NNSA, Air Force Complete Successful B61-12 Life Extension Program Development Flight Test at Tonopah Test Range November 16, 2015 WASHINGTON - The National Nuclear Security ...

  5. Systems and methods of detecting force and stress using tetrapod nanocrystal

    DOE Patents [OSTI]

    Choi, Charina L.; Koski, Kristie J.; Sivasankar, Sanjeevi; Alivisatos, A. Paul

    2013-08-20

    Systems and methods of detecting force on the nanoscale including methods for detecting force using a tetrapod nanocrystal by exposing the tetrapod nanocrystal to light, which produces a luminescent response by the tetrapod nanocrystal. The method continues with detecting a difference in the luminescent response by the tetrapod nanocrystal relative to a base luminescent response that indicates a force between a first and second medium or stresses or strains experienced within a material. Such systems and methods find use with biological systems to measure forces in biological events or interactions.

  6. Maximum allowable hydraulic ram force for heel jet removal Tank 241-C-106

    SciTech Connect (OSTI)

    PAULSEN, S.S.

    2003-01-10

    This document contains an evaluation of the maximum force that can be used to actuate the hydraulic ram assembly without causing permanent damage to the riser or pit.

  7. Progress on Light-Ion Fusion Reactions with Three-Nucleon Forces...

    Office of Scientific and Technical Information (OSTI)

    Progress on Light-Ion Fusion Reactions with Three-Nucleon Forces Citation Details ... Visit OSTI to utilize additional information resources in energy science and technology. A ...

  8. Effect of polarization force on the Mach cones in a complex plasma

    SciTech Connect (OSTI)

    Bandyopadhyay, P. [Max-Planck Institut fuer Extraterrestrische Physik, D-85741, Garching (Germany); Institute for Plasma Research, Bhat, Gandhinagar-382428 (India); Jiang, K. [Max-Planck Institut fuer Extraterrestrische Physik, D-85741, Garching (Germany); Infineon Technologies AG, Am Campeon 1-12, D-85579 Neubiberg (Germany); Dey, R. [Max-Planck Institut fuer Plasma Physik, Boltzmannstr. 2, 85748, Garching (Germany); Morfill, G. E. [Max-Planck Institut fuer Extraterrestrische Physik, D-85741, Garching (Germany)

    2012-12-15

    We report the modifications of compressional Mach cone propagation characteristics due to the polarization force acting on micron size dust particles embedded in a non-uniform plasma. We solve the hydrodynamic fluid equations for highly charged dust particles to investigate the Mach cone by incorporating the polarization force in the momentum equation and observe the structural change on lateral wakes at different polarization force for a given Mach number and Epstein drag force. We also notice that the maximum amplitude of normalized dust density perturbation decreases with the increase of polarization interaction when the other parameters remain constant.

  9. CASL - CFD-Based Turbulence Force Evaluation for Grid-to-Rod Fretting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Phenomena CFD-Based Turbulence Force Evaluation for Grid-to-Rod Fretting Phenomena Article Background: Roger Lu - #83 - L1:CASL.P5.02 - Determine extent structural analysis amplifies (or damps) differences in pressure forces between different CFD codes for analysis of GTRF phenomenon (CASL.012) based on "CASL report CFD Turbulence Force Calculations and Grid-to-Rod Fretting Simulation" CFD-Based Turbulence Force Evaluation for Grid-to-Rod Fretting Phenomena R. Y. Lu and Z. Karoutas

  10. Report of the Task Force on FracFocus 2.0 | Department of Energy

    Energy Savers [EERE]

    Task Force on FracFocus 2.0 Report of the Task Force on FracFocus 2.0 This report presents the findings and recommendations for the Secretary of Energy Advisory Board (SEAB) Task Force on FracFocus. The Task Force was charged with reviewing how FracFocus 2.0 houses the information Federal and State regulatory agencies require as part of their regulatory functions with regard to disclosure of the composition and quantities of fracturing fluids injected into unconventional oil and gas wells. This

  11. A simple model simulating a fan as a source of axial and circumferential body forces

    Energy Science and Technology Software Center (OSTI)

    2002-07-01

    This software can be used in a computational fluids dynamics (CFD) code to represent a fan as a source of axial and circumferential body forces. The combined software can be used effectively in car design analyses that involve many underhood thermal management simulations. FANMOD uses as input the rotational speed of the fan, geometric fan data, and the lift and drag coefficients of the blades, and predicts the body forces generated by the fan inmore » the axial and circumferential directions. These forces can be used as momentum forces in a CFD code to simulate the effect of the fan in an underhood thermal management simulation.« less

  12. Tactical Response Force 1 graduation: a family reunion of sorts | Y-12

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National Security Complex Tactical Response Force 1 ... Tactical Response Force 1 graduation: a family reunion of sorts Posted: July 28, 2016 - 2:51pm Tactical Response Force 1 Class 3-16. "Family ties" makes a fitting theme for Tactical Response Force 1 Class 3-16's graduation ceremony. Three kinds of family attended the graduation at New Hope Center: graduates' proud parents, spouses and children; CNS employees watching their children or other relatives graduate; and the

  13. July 15, 2014 SEAB Task Force Meeting on Technology Development for Environmental Management

    Broader source: Energy.gov [DOE]

    The SEAB Task Force on Technology Development for Environmental Management met at U.S. Department of Energy in Washington, DC.

  14. FY 2017 Budget Hearing Before the House Armed Services Subcommittee on Strategic Forces

    Broader source: Energy.gov [DOE]

    NNSA and EM FY 2017 Budget Hearing Before the House Armed Services Subcommittee on Strategic Forces. Testimony of Monica Regalbuto, Assistant Secretary for Environmental Management.

  15. The Secretary of Energy Advisory Board (SEAB) Task Force on Nuclear Nonproliferation

    Broader source: Energy.gov [DOE]

    The Secretary of Energy Advisory Board (SEAB) Task Force on Nuclear Nonproliferation comprises SEAB members and individuals with expertise and experience in the technologies, institutions, and...

  16. Linkage to Previous International PV Module QA Task Force Workshops; Proposal for Rating System (Presentation)

    SciTech Connect (OSTI)

    Kurtz, S.; Wohlgemuth, J.; Sample, T.; Yamamichi, M.; Kondo, M.

    2013-05-01

    This presentation gives the historical background of the creation of the International PV QA Task Force as an introduction to the PV Module Reliability Workshop.

  17. Control of Prestressing Force in Rod for Reducing Bending in Beams

    SciTech Connect (OSTI)

    Wong, M. B.

    2010-05-21

    This paper presents a method to determine the prestressing force required in a rod for reducing the bending effects in a beam. The rod is positioned underneath the beam such that the prestressing force is counteracting the effects of beam bending. It has been found that the prestressing force may also increase the bending as a result of P-delta effect. Therefore, the choice of both the prestressing force and the rod eccentricity from the beam axis is important in determining the appropriate actions to resist the bending of the beam. Over-prestressing the rod may even induce bending or buckling failure in the beam in the reverse direction.

  18. Convergent conductivity corrections to the Casimir force via exponential basis functions

    SciTech Connect (OSTI)

    Cui, Song; Soh, Yeng Chai

    2010-12-15

    A closed-form finite conductivity correction factor for the ideal Casimir force is proposed, based on exponential basis functions. Our method can facilitate experimental verifications of theories in the study of the Casimir force. A theoretical analysis is given to explain why our method is accurate at both large and small separation gaps. Numerical computations have been performed to confirm that our method is accurate in various experimental configurations. Our approach is widely applicable to various Casimir force interactions between metals and dielectrics. Our study can be extended to the study of the repulsive Casimir force as well.

  19. On the calculation of internal forces in mechanically stressed polyatomic molecules

    SciTech Connect (OSTI)

    Avdoshenko, Stanislav M.; Konda, Sai Sriharsha M.; Makarov, Dmitrii E.

    2014-10-07

    We discuss how to define and to compute internal forces in a molecule subjected to mechanical stress. Because of the inherently many-body character of intramolecular interactions, internal forces cannot be uniquely defined without specifying a set of internal coordinates used to describe the molecular structure. When such a set is comprised of 3N − 6 interactomic distances (N being the number of atoms) and includes the bond lengths of interest, we show that the associated forces, while satisfying the equation F = ∂V/∂R (where R is the bond length, F is the internal force in this bond, and V is the potential energy of the molecule), can be determined from the molecular geometry alone. We illustrate these ideas using several toy models ranging from small molecules to a graphene sheet and show that the magnitude of the internal force in a bond is not necessarily a good predictor of its strength in response to mechanical loading. At the same time, analysis of internal forces reveals interesting phenomena such as the force multiplication effect, where weak external forces may, e.g., be used to break strong bonds, and offers insight into the catch-bond phenomenon where chemical reactivity is suppressed through application of a force.

  20. Conventional armed forces in Europe: Technology scenario development

    SciTech Connect (OSTI)

    Houser, G.M.

    1990-07-01

    In January 1986, the Soviet Union's Mikhail Gorbachev proposed elimination of all nuclear weapons by the year 2000. In April of that year, Mr. Gorbachev proposed substantial reductions of conventional weapons in Europe, from the Atlantic Ocean to the Ural Mountains, including reductions in operational-tactical nuclear weapons. In May 1986, the North Atlantic Treaty Organization (NATO) responded with the Brussels Declaration on Conventional Arms Control,'' which indicated readiness to open East/West discussions on establishing a mandate for negotiating conventional arms control throughout Europe. The Group of 23,'' which met in Vienna beginning in February 1987, concluded the meeting in January 1989 with a mandate for the Conventional Armed Forced in Europe (CFE) negotiations. On 6 March 1989, CFE talks began, and these talks have continued through six rounds (as of April 1990). Although US President George Bush, on 30 May 1989, called for agreement within six months to a year, and the Malta meeting of December 1989 called for completion of a CFE agreement by the end of 1990, much remains to be negotiated. This report provides three types of information. First, treaty provisions brought to the table by both sides are compared. Second, on the basis of these provisions, problem areas for each of the provision elements are postulated and possible scenarios for resolving these problem areas are developed. Third, the scenarios are used as requirements for tasks assigned program elements for possible US implementation of a CFE treaty. As progress is achieved during the negotiations, this report could be updated, as necessary, in each of the areas to provide a continuing systematic basis for program implementation and technology development. 8 refs.

  1. A metrological large range atomic force microscope with improved performance

    SciTech Connect (OSTI)

    Dai, Gaoliang; Wolff, Helmut; Pohlenz, Frank; Danzebrink, Hans-Ulrich

    2009-04-15

    A metrological large range atomic force microscope (Met. LR-AFM) has been set up and improved over the past years at Physikalisch-Technische Bundesanstalt (PTB). Being designed as a scanning sample type instrument, the sample is moved in three dimensions by a mechanical ball bearing stage in combination with a compact z-piezostage. Its topography is detected by a position-stationary AFM head. The sample displacement is measured by three embedded miniature homodyne interferometers in the x, y, and z directions. The AFM head is aligned in such a way that its cantilever tip is positioned on the sample surface at the intersection point of the three interferometer measurement beams for satisfying the Abbe measurement principle. In this paper, further improvements of the Met. LR-AFM are reported. A new AFM head using the beam deflection principle has been developed to reduce the influence of parasitic optical interference phenomena. Furthermore, an off-line Heydemann correction method has been applied to reduce the inherent interferometer nonlinearities to less than 0.3 nm (p-v). Versatile scanning functions, for example, radial scanning or local AFM measurement functions, have been implemented to optimize the measurement process. The measurement software is also improved and allows comfortable operations of the instrument via graphical user interface or script-based command sets. The improved Met. LR-AFM is capable of measuring, for instance, the step height, lateral pitch, line width, nanoroughness, and other geometrical parameters of nanostructures. Calibration results of a one-dimensional grating and a set of film thickness standards are demonstrated, showing the excellent metrological performance of the instrument.

  2. Free vibrations of U-shaped atomic force microscope probes

    SciTech Connect (OSTI)

    Rezaei, E.; Turner, J. A.

    2014-05-07

    Contact resonance atomic force microscope (AFM) methods have been used to quantify the elastic and viscoelastic properties of a variety of materials such as polymers, ceramics, biological materials, and metals with spatial resolution on the order of tens of nanometers. This approach involves measurement of the resonant frequencies of the AFM probe both for the free case and the case for which the tip is in contact with a sample. Vibration models of the probe and tip-sample contact models are then used to determine the sample properties from the frequency behavior and to create images of the sample properties. This work has been primarily focused on rectangular, single-beam probes for which the vibration models are relatively simple. Recently, U-shaped AFM probes have been developed to allow local heating of samples and the resonances of these probes are much more complex. In this article, a simplified analytical model of these U-shaped probes is described. This three beam model includes two beams clamped at one end and connected with a perpendicular cross beam at the other end. The beams are assumed only to bend in flexure and twist but their coupling allows a wide range of possible dynamic behavior. Results are presented for the first ten modes and the mode shapes are shown to have complex coupling between the flexure and twisting of the beams, particularly for the higher modes. All resonant frequency results are in good agreement with finite element results for the three probe designs and two values of thickness considered (all wavenumbers are within 3.0%). This work is anticipated to allow U-shaped probes to be used eventually for quantitative measurements of sample material properties during heating using a contact resonance approach.

  3. Autopilot for frequency-modulation atomic force microscopy

    SciTech Connect (OSTI)

    Kuchuk, Kfir; Schlesinger, Itai; Sivan, Uri

    2015-10-15

    One of the most challenging aspects of operating an atomic force microscope (AFM) is finding optimal feedback parameters. This statement applies particularly to frequency-modulation AFM (FM-AFM), which utilizes three feedback loops to control the cantilever excitation amplitude, cantilever excitation frequency, and z-piezo extension. These loops are regulated by a set of feedback parameters, tuned by the user to optimize stability, sensitivity, and noise in the imaging process. Optimization of these parameters is difficult due to the coupling between the frequency and z-piezo feedback loops by the non-linear tip-sample interaction. Four proportional-integral (PI) parameters and two lock-in parameters regulating these loops require simultaneous optimization in the presence of a varying unknown tip-sample coupling. Presently, this optimization is done manually in a tedious process of trial and error. Here, we report on the development and implementation of an algorithm that computes the control parameters automatically. The algorithm reads the unperturbed cantilever resonance frequency, its quality factor, and the z-piezo driving signal power spectral density. It analyzes the poles and zeros of the total closed loop transfer function, extracts the unknown tip-sample transfer function, and finds four PI parameters and two lock-in parameters for the frequency and z-piezo control loops that optimize the bandwidth and step response of the total system. Implementation of the algorithm in a home-built AFM shows that the calculated parameters are consistently excellent and rarely require further tweaking by the user. The new algorithm saves the precious time of experienced users, facilitates utilization of FM-AFM by casual users, and removes the main hurdle on the way to fully automated FM-AFM.

  4. Method for imaging liquid and dielectric materials with scanning polarization force microscopy

    DOE Patents [OSTI]

    Hu, Jun; Ogletree, D. Frank; Salmeron, Miguel; Xiao, Xudong

    1999-01-01

    The invention images dielectric polarization forces on surfaces induced by a charged scanning force microscope (SFM) probe tip. On insulators, the major contribution to the surface polarizability at low frequencies is from surface ions. The mobility of these ions depends strongly on the humidity. Using the inventive SFM, liquid films, droplets, and other weakly adsorbed materials have been imaged.

  5. Method for imaging liquid and dielectric materials with scanning polarization force microscopy

    DOE Patents [OSTI]

    Hu, J.; Ogletree, D.F.; Salmeron, M.; Xiao, X.

    1999-03-09

    The invention images dielectric polarization forces on surfaces induced by a charged scanning force microscope (SFM) probe tip. On insulators, the major contribution to the surface polarizability at low frequencies is from surface ions. The mobility of these ions depends strongly on the humidity. Using the inventive SFM, liquid films, droplets, and other weakly adsorbed materials have been imaged. 9 figs.

  6. Apparatus for imaging liquid and dielectric materials with scanning polarization force microscopy

    DOE Patents [OSTI]

    Hu, J.; Ogletree, D.F.; Salmeron, M.; Xiao, X.

    1998-04-28

    The invention images dielectric polarization forces on surfaces induced by a charged scanning force microscope (SFM) probe tip. On insulators, the major contribution to the surface polarizability at low frequencies is from surface ions. The mobility of these ions depends strongly on the humidity. Using the inventive SFM, liquid films, droplets, and other weakly adsorbed materials have been imaged. 9 figs.

  7. Apparatus for imaging liquid and dielectric materials with scanning polarization force microscopy

    DOE Patents [OSTI]

    Hu, Jun; Ogletree, D. Frank; Salmeron, Miguel; Xiao, Xudong

    1998-01-01

    The invention images dielectric polarization forces on surfaces induced by a charged scanning force microscope (SFM) probe tip. On insulators, the major contribution to the surface polarizability at low frequencies is from surface ions. The mobility of these ions depends strongly on the humidity. Using the inventive SFM, liquid films, droplets, and other weakly adsorbed materials have been imaged.

  8. The NEPA Task Force Report to the Council on Environmental Quality: Modernizing NEPA Implementation (CEQ, 2003)

    Broader source: Energy.gov [DOE]

    This report presents the results of research and consultations by the National Environmental Policy Task Force concerning the implementation of the environmental impact analysis requirement of the National Environmental Policy Act (NEPA). The task force interviewed federal agencies; reviewed public comments, literature, reports, and case studies; and spoke with individuals and representatives from federal, state, and local governments, tribes, and interest groups.

  9. Development of Integrated ASR Model Forcing Data and Their Applications to Improve CAM

    SciTech Connect (OSTI)

    Zhang, Minghua

    2016-01-01

    In this project, we have (1) improved the constrained variational analysis algorithm of ARM model forcing data, and (2) used the ARM forcing data to identify systematic biases in clouds and radiation in the CAM5 and design new physical parameterizations to improve it.

  10. Silicon cantilever functionalization for cellulose-specific chemical force imaging of switchgrass

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Lee, Ida; Evans, Barbara R.; Foston, Marcus B.; Ragauskas, Arthur J.

    2015-05-08

    A method for direct functionalization of silicon and silicon nitride cantilevers with bifunctional silanes was tested with model surfaces to determine adhesive forces for different hydrogen-bonding chemistries. Application for biomass surface characterization was tested by mapping switchgrass and isolated switchgrass cellulose in topographic and force-volume mode using a cellulose-specific cantilever.

  11. Silicon cantilever functionalization for cellulose-specific chemical force imaging of switchgrass

    SciTech Connect (OSTI)

    Lee, Ida; Evans, Barbara R; Foston, Marcus B; Ragauskas, Arthur J

    2015-01-01

    A method for direct functionalization of silicon and silicon nitride cantilevers with bifunctional silanes was tested with model surfaces to determine adhesive forces for different hydrogen-bonding chemistries. Application for biomass surface characterization was tested by mapping switchgrass and isolated switchgrass cellulose in topographic and force-volume mode using a cellulose-specific cantilever.

  12. Collaborative Research. Separating Forced and Unforced Decadal Predictability in Models and Observations

    SciTech Connect (OSTI)

    DelSole, Timothy

    2015-08-31

    The purpose of the proposed research was to identify unforced predictable components on decadal time scales, distinguish these components from forced predictable components, and to assess the reliability of model predictions of these components. The question of whether anthropogenic forcing changes decadal predictability, or gives rise to new forms of decadal predictability, also will be

  13. Reconstruction of dynamic forces during impact tests of a crushable structure

    SciTech Connect (OSTI)

    Bateman, V.I.; Carne, T.G.; Mayes, R.L.; Davie, N.T.

    1993-12-31

    A force reconstruction technique is being used to assess the dynamic performance of a crushable structure (a bomb nose) in both the axial (90{degree}) and slapdown (30{degree}) impact conditions. The dynamic force characteristics for the current nose design, determined from these tests, will be used to write a dynamic force specification for a new nose design that will replace the current nose. Two structures for experimentally determining the dynamic force -- deflection characteristics of the old and new noses have been designed and constructed. One structure has the same dynamic characteristics as the bomb and is being used for axial and slapdown orientations with rocket-propelled testing. The second structure has the same mass as the bomb and is being used for iterative axial testing of candidate designs with a pneumatic ram. The structural characteristics of these two structures have been determined and are presented. A force reconstruction algorithm using the Sum of Weighted Accelerations Technique (SWAT) has been developed for each of the two structures. The force reconstruction algorithms have been verified for both structures using laboratory data. The force reconstruction process and the resulting algorithms are described. Data verifying the force reconstruction algorithms is presented.

  14. January 6, 2014 SEAB FracFocus 2.0 Task Force Meeting Minutes

    Broader source: Energy.gov [DOE]

    The SEAB FracFocus 2.0 Task Force, chaired by John Deutch, held its first meeting on January 6, 2014.  The Task Force is charged with reviewing how FracFocus 2.0 houses the information Federal and...

  15. Linear and non-linear forced response of a conical, ducted, laminar premixed flame

    SciTech Connect (OSTI)

    Karimi, Nader; Brear, Michael J.; Jin, Seong-Ho; Monty, Jason P. [Department of Mechanical Engineering, University of Melbourne, Parkville, 3010 Vic. (Australia)

    2009-11-15

    This paper presents an experimental study on the dynamics of a ducted, conical, laminar premixed flame subjected to acoustic excitation of varying amplitudes. The flame transfer function is measured over a range of forcing frequencies and equivalence ratios. In keeping with previous works, the measured flame transfer function is in good agreement with that predicted by linear kinematic theory at low amplitudes of acoustic velocity excitation. However, a systematic departure from linear behaviour is observed as the amplitude of the velocity forcing upstream of the flame increases. This non-linearity is mostly in the phase of the transfer function and manifests itself as a roughly constant phase at high forcing amplitude. Nonetheless, as predicted by non-linear kinematic arguments, the response always remains close to linear at low forcing frequencies, regardless of the forcing amplitude. The origin of this phase behaviour is then sought through optical data post-processing. (author)

  16. Wave forces on an array of oscillating water column type free standing wave energy caissons

    SciTech Connect (OSTI)

    Neelamani, S.; Thiruvenkatasamy, K.

    1995-12-31

    The wave induced in-line forces on a 1:50 scale model of an array of Multi resonant Oscillating Water Column (MOWC) type free standing wave energy caisson were experimentally investigated. A range of hydrodynamic parameters with different damping of oscillating water column (OWC) chamber and various center to center spacings between the caissons were used. In general, the force on the MOWC caisson array is two times that of a vertical wall, for maximum damping of OWC chamber. Reduction of damping of the OWC air chamber reduces the force on the array of caissons. With reduced damping, forces on OWC array can even be smaller than that the ones on a vertical wall. For smaller center to center (C/C) spacing between the caissons with respect to its harbor width, OWC array acts like a perforated breakwater, attracting smaller wave forces and for higher C/C spacing, it behaves like a vertical wall.

  17. Crushable structure performance determined from reconstructed dynamic forces during impact tests

    SciTech Connect (OSTI)

    Bateman, V.I.

    1995-01-01

    A force reconstruction technique has been used to assess the dynamic performance of a crushable structure (a bomb nose) in both the axial (90{degrees}) and slapdown (30{degrees}) impact conditions. The dynamic force characteristics for the nose design, determined from these test results, have been used to write a dynamic force specification for a new nose design that will replace the old nose. The dynamic forces are reconstructed from measured acceleration responses with the Sum of Weighted Accelerations Technique (SWAT) developed at Sandia National Laboratories. Axial characterizations for the old nose are presented from tests at two SNL facilities: a rocket rail launcher facility and an 18-Inch horizontal actuator facility. The characterizations for the old nose are compared to the characterizations for two new nose designs. Slapdown characterizations for the old nose are presented. Incorporation of the test results into a dynamic force specification is discussed.

  18. FORCE2: A multidimensional flow program for gas solids flow theory guide

    SciTech Connect (OSTI)

    Burge, S.W.

    1991-05-01

    This report describes the theory and structure of the FORCE2 flow program. The manual describes the governing model equations, solution procedure and their implementation in the computer program. FORCE2 is an extension of an existing B&V multidimensional, two-phase flow program. FORCE2 was developed for application to fluid beds by flow implementing a gas-solids modeling technology derived, in part, during a joint government -- industry research program, ``Erosion of FBC Heat Transfer Tubes,`` coordinated by Argonne National Laboratory. The development of FORCE2 was sponsored by ASEA-Babcock, an industry participant in this program. This manual is the principal documentation for the program theory and organization. Program usage and post-processing of code predictions with the FORCE2 post-processor are described in a companion report, FORCE2 -- A Multidimensional Flow Program for Fluid Beds, User`s Guide. This manual is segmented into sections to facilitate its usage. In section 2.0, the mass and momentum conservation principles, the basis for the code, are presented. In section 3.0, the constitutive relations used in modeling gas-solids hydrodynamics are given. The finite-difference model equations are derived in section 4.0 and the solution procedures described in sections 5.0 and 6.0. Finally, the implementation of the model equations and solution procedure in FORCE2 is described in section 7.0.

  19. Computational Intelligence Based Data Fusion Algorithm for Dynamic sEMG and Skeletal Muscle Force Modelling

    SciTech Connect (OSTI)

    Chandrasekhar Potluri,; Madhavi Anugolu; Marco P. Schoen; D. Subbaram Naidu

    2013-08-01

    In this work, an array of three surface Electrography (sEMG) sensors are used to acquired muscle extension and contraction signals for 18 healthy test subjects. The skeletal muscle force is estimated using the acquired sEMG signals and a Non-linear Wiener Hammerstein model, relating the two signals in a dynamic fashion. The model is obtained from using System Identification (SI) algorithm. The obtained force models for each sensor are fused using a proposed fuzzy logic concept with the intent to improve the force estimation accuracy and resilience to sensor failure or misalignment. For the fuzzy logic inference system, the sEMG entropy, the relative error, and the correlation of the force signals are considered for defining the membership functions. The proposed fusion algorithm yields an average of 92.49% correlation between the actual force and the overall estimated force output. In addition, the proposed fusionbased approach is implemented on a test platform. Experiments indicate an improvement in finger/hand force estimation.

  20. Controlling the optical dipole force for molecules with field-induced alignment

    SciTech Connect (OSTI)

    Purcell, S. M.; Barker, P. F.

    2010-09-15

    We measure the role of field-induced alignment on the dipole force for molecules using a single focused nonresonant laser beam. We show that through the alignment process we can modify the effective polarizability by field polarization and thus control the center-of-mass motion of the molecule. We observe a maximum change of 20% in the dipole force on CS{sub 2} molecules when changing from linearly to circularly polarized light. Additionally, the effect of the dipole force on different vibrational states is also studied.