National Library of Energy BETA

Sample records for gasoline product designated

  1. Design Case Summary: Production of Gasoline and Diesel from Biomass...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Design Case Summary: Production of Gasoline and Diesel from Biomass via Fast Pyrolysis, Hydrotreating, and Hydrocracking Design Case Summary: Production of Gasoline and Diesel from...

  2. Design Case Summary: Production of Gasoline and Diesel from Biomass via Fast Pyrolysis, Hydrotreating, and Hydrocracking

    SciTech Connect (OSTI)

    Jones, S. B.; Valkenburg, C.; Walkton, C. W.; Elliott, D. C.; Holladay, J. E.; Stevens, D. J.; Kinchin, C.; Czernik, S.

    2010-02-01

    The Biomass Program develops design cases to understand the current state of conversion technologies and to determine where improvements need to take place in the future. This design case is the first to establish detailed cost targest for the production of diesel and gasoline blendstock from biomass via a fast pyrolysis process.

  3. Production of Gasoline and Diesel from Biomass via Fast Pyrolysis...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Production of Gasoline and Diesel from Biomass via Fast Pyrolysis, Hydrotreating and Hydrocracking: A Design Case Production of Gasoline and Diesel from Biomass via Fast Pyrolysis,...

  4. Diesel vs Gasoline Production | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    vs Gasoline Production Diesel vs Gasoline Production A look at refinery decisions that decide "swing" between diesel and gasoline production deer08leister.pdf More Documents &...

  5. Production of Gasoline and Diesel from Biomass via Fast Pyrolysis, Hydrotreating and Hydrocracking: A Design Case

    SciTech Connect (OSTI)

    Jones, Susanne B.; Valkenburt, Corinne; Walton, Christie W.; Elliott, Douglas C.; Holladay, Johnathan E.; Stevens, Don J.; Kinchin, Christopher; Czernik, Stefan

    2009-02-25

    The purpose of this study is to evaluate a processing pathway for converting biomass into infrastructure-compatible hydrocarbon biofuels. This design case investigates production of fast pyrolysis oil from biomass and the upgrading of that bio-oil as a means for generating infrastructure-ready renewable gasoline and diesel fuels. This study has been conducted using similar methodology and underlying basis assumptions as the previous design cases for ethanol. The overall concept and specific processing steps were selected because significant data on this approach exists in the public literature. The analysis evaluates technology that has been demonstrated at the laboratory scale or is in early stages of commercialization. The fast pyrolysis of biomass is already at an early stage of commercialization, while upgrading bio-oil to transportation fuels has only been demonstrated in the laboratory and at small engineering development scale. Advanced methods of pyrolysis, which are under development, are not evaluated in this study. These may be the subject of subsequent analysis by OBP. The plant is designed to use 2000 dry metric tons/day of hybrid poplar wood chips to produce 76 million gallons/year of gasoline and diesel. The processing steps include: 1.Feed drying and size reduction 2.Fast pyrolysis to a highly oxygenated liquid product 3.Hydrotreating of the fast pyrolysis oil to a stable hydrocarbon oil with less than 2% oxygen 4.Hydrocracking of the heavy portion of the stable hydrocarbon oil 5.Distillation of the hydrotreated and hydrocracked oil into gasoline and diesel fuel blendstocks 6. Hydrogen production to support the hydrotreater reactors. The "as received" feedstock to the pyrolysis plant will be "reactor ready". This development will likely further decrease the cost of producing the fuel. An important sensitivity is the possibility of co-locating the plant with an existing refinery. In this case, the plant consists only of the first three steps: feed prep, fast pyrolysis, and upgrading. Stabilized, upgraded pyrolysis oil is transferred to the refinery for separation and finishing into motor fuels. The off-gas from the hydrotreaters is also transferred to the refinery, and in return the refinery provides lower-cost hydrogen for the hydrotreaters. This reduces the capital investment. Production costs near $2/gal (in 2007 dollars) and petroleum industry infrastructure-ready products make the production and upgrading of pyrolysis oil to hydrocarbon fuels an economically attractive source of renewable fuels. The study also identifies technical areas where additional research can potentially lead to further cost improvements.

  6. Production of Gasoline and Diesel from Biomass via Fast Pyrolysis, Hydrotreating and Hydrocracking: A Design Case

    SciTech Connect (OSTI)

    Jones, Susanne B.; Valkenburt, Corinne; Walton, Christie W.; Elliott, Douglas C.; Holladay, Johnathan E.; Stevens, Don J.; Kinchin, Christopher; Czernik, Stefan

    2009-02-28

    The purpose of this study is to evaluate a processing pathway for converting biomass into infrastructure-compatible hydrocarbon biofuels. This design case investigates production of fast pyrolysis oil from biomass and the upgrading of that bio-oil as a means for generating infrastructure-ready renewable gasoline and diesel fuels. This study has been conducted using the same methodology and underlying basis assumptions as the previous design cases for ethanol. The overall concept and specific processing steps were selected because significant data on this approach exists in the public literature. The analysis evaluates technology that has been demonstrated at the laboratory scale or is in early stages of commercialization. The fast pyrolysis of biomass is already at an early stage of commercialization, while upgrading bio-oil to transportation fuels has only been demonstrated in the laboratory and at small engineering development scale. Advanced methods of pyrolysis, which are under development, are not evaluated in this study. These may be the subject of subsequent analysis by OBP. The plant is designed to use 2000 dry metric tons/day of hybrid poplar wood chips to produce 76 million gallons/year of gasoline and diesel. The processing steps include: 1.Feed drying and size reduction 2.Fast pyrolysis to a highly oxygenated liquid product 3.Hydrotreating of the fast pyrolysis oil to a stable hydrocarbon oil with less than 2% oxygen 4.Hydrocracking of the heavy portion of the stable hydrocarbon oil 5.Distillation of the hydrotreated and hydrocracked oil into gasoline and diesel fuel blendstocks 6. Hydrogen production to support the hydrotreater reactors. The “as received” feedstock to the pyrolysis plant will be “reactor ready.” This development will likely further decrease the cost of producing the fuel. An important sensitivity is the possibility of co-locating the plant with an existing refinery. In this case, the plant consists only of the first three steps: feed prep, fast pyrolysis, and upgrading. Stabilized, upgraded pyrolysis oil is transferred to the refinery for separation and finishing into motor fuels. The off-gas from the hydrotreaters is also transferred to the refinery, and in return the refinery provides lower-cost hydrogen for the hydrotreaters. This reduces the capital investment. Production costs near $2/gal (in 2007 dollars) and petroleum industry infrastructure-ready products make the production and upgrading of pyrolysis oil to hydrocarbon fuels an economically attractive source of renewable fuels. The study also identifies technical areas where additional research can potentially lead to further cost improvements.

  7. High Efficiency Clean Combustion Engine Designs for Gasoline...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Engine Designs for Gasoline and Diesel Engines High Efficiency Clean Combustion Engine Designs for Gasoline and Diesel Engines 2009 DOE Hydrogen Program and Vehicle Technologies...

  8. Ethanol Demand in United States Gasoline Production

    SciTech Connect (OSTI)

    Hadder, G.R.

    1998-11-24

    The Oak Ridge National Laboratory (OWL) Refinery Yield Model (RYM) has been used to estimate the demand for ethanol in U.S. gasoline production in year 2010. Study cases examine ethanol demand with variations in world oil price, cost of competing oxygenate, ethanol value, and gasoline specifications. For combined-regions outside California summer ethanol demand is dominated by conventional gasoline (CG) because the premised share of reformulated gasoline (RFG) production is relatively low and because CG offers greater flexibility for blending high vapor pressure components like ethanol. Vapor pressure advantages disappear for winter CG, but total ethanol used in winter RFG remains low because of the low RFG production share. In California, relatively less ethanol is used in CG because the RFG production share is very high. During the winter in California, there is a significant increase in use of ethanol in RFG, as ethanol displaces lower-vapor-pressure ethers. Estimated U.S. ethanol demand is a function of the refiner value of ethanol. For example, ethanol demand for reference conditions in year 2010 is 2 billion gallons per year (BGY) at a refiner value of $1.00 per gallon (1996 dollars), and 9 BGY at a refiner value of $0.60 per gallon. Ethanol demand could be increased with higher oil prices, or by changes in gasoline specifications for oxygen content, sulfur content, emissions of volatile organic compounds (VOCS), and octane numbers.

  9. Ethanol Production and Gasoline Prices: A Spurious Correlation

    E-Print Network [OSTI]

    Rothman, Daniel

    Ethanol Production and Gasoline Prices: A Spurious Correlation Christopher R. Knittel and Aaron proponents of ethanol have argued that ethanol production greatly lowers gasoline prices, with one industry group claiming it reduced gasoline prices by 89 cents in 2010 and $1.09 in 2011. The estimates have been

  10. Production of gasoline and distillate fuels from light cycle oil

    SciTech Connect (OSTI)

    Derr, W.R. Jr.; Owens, P.J.; Sarli, M.S.

    1991-02-05

    This patent describes a process for the co-production of high quality gasoline and distillate products from catalytically cracked feedstocks. It comprises catalytically cracking a hydrocarbon feedstock to produce a substantially dealkylated cracked product, hydrocracking the substantially dealkylated product with a hydrocracking catalyst at a hydrogen partial pressure not greater than 1200 psig and a conversion to gasoline boiling range products not more than 75 wt. percent; separating the products of hydrocracking into a gasoline boiling range fraction, a first distillate range fraction boiling immediately above the gasoline fraction with an end point in the range of 450{degrees} to 500{degrees} F and a second, higher boiling distillate fraction which is more paraffinic than the first distillate fraction; recycling at least a portion of the first, lower boiling distillate fraction to the catalytic cracking step, recovering the second, higher boiling distillate fraction.

  11. Production of gasoline and distillate fuels from light cycle oil

    SciTech Connect (OSTI)

    Derr, W.R. Jr.; Owens, P.J.; Sarli, M.S.

    1991-01-15

    This patent describes a process for the co-production of high quality gasoline and distillate products from catalytically cracked feedstocks. It comprises: hydrocracking a substantially dealkylated feedstock with a hydrocracking catalyst at a hydrogen partial pressure not greater than 1200 psig and a conversion to gasoline boiling range products not more than 75 wt. percent; separating the products of hydrocracking into a gasoline boiling range fraction, a first distillate range fraction boiling immediately above the gasoline fraction with an end point in the range of 450{degrees} to 500{degrees} F. and a second distillate fraction boiling above the first distillate fraction; recycling at least a portion of the first distillate fraction to the hydrocracking step to effect saturation and partial cracking of aromatics in the recycled fraction to increase the paraffin content of the second distillate fraction; recovering the second distillate fraction.

  12. Comparing Scales of Environmental Effects from Gasoline and Ethanol Production

    SciTech Connect (OSTI)

    Parish, Esther S; Kline, Keith L; Dale, Virginia H; Efroymson, Rebecca Ann; McBride, Allen; Johnson, Timothy L; Hilliard, Michael R; Bielicki, Dr Jeffrey M

    2013-01-01

    Understanding the environmental effects of alternative fuel production is critical to characterizing the sustainability of energy resources to inform policy and regulatory decisions. The magnitudes of these environmental effects vary according to the intensity and scale of fuel production along each step of the supply chain. We compare the scales (i.e., spatial extent and temporal duration) of ethanol and gasoline production processes and environmental effects based on a literature review, and then synthesize the scale differences on space-time diagrams. Comprehensive assessment of any fuel-production system is a moving target, and our analysis shows that decisions regarding the selection of spatial and temporal boundaries of analysis have tremendous influences on the comparisons. Effects that strongly differentiate gasoline and ethanol supply chains in terms of scale are associated with when and where energy resources are formed and how they are extracted. Although both gasoline and ethanol production may result in negative environmental effects, this study indicates that ethanol production traced through a supply chain may impact less area and result in more easily reversed effects of a shorter duration than gasoline production.

  13. Response to "Ethanol Production and Gasoline Prices: A Spurious Correlation" by Knittel and Smith

    E-Print Network [OSTI]

    Rothman, Daniel

    Response to "Ethanol Production and Gasoline Prices: A Spurious Correlation" by Knittel and Smith Beardshear Hall, (515) 294-7612." #12;1 Response to "Ethanol Production and Gasoline Prices: A Spurious Relating Ethanol Production to Gasoline Prices" written by myself and Xiadong Du, and published in 2009

  14. Gasoline accounts for about half the U.S. consumption of petroleum products, and its

    E-Print Network [OSTI]

    2 Gasoline accounts for about half the U.S. consumption of petroleum products, and its price is the most visible among these products. As such, changes in gasoline prices are always under public scrutiny. Many claim to observe an asymmetric relationship between gasoline and oil prices -- specifically

  15. Petroleum Products Table 31. Motor Gasoline Prices by Grade...

    Gasoline and Diesel Fuel Update (EIA)

    Information AdministrationPetroleum Marketing Annual 2000 Table 31. Motor Gasoline Prices by Grade, Sales Type, PAD District, and State (Cents per Gallon Excluding Taxes) -...

  16. Energy and crude oil input requirements for the production of reformulated gasolines

    SciTech Connect (OSTI)

    Singh, M.; McNutt, B.

    1993-11-01

    The energy and crude oil requirements for the production of reformulated gasolines (RFG) are estimated. Both the energy and crude oil embodied in the final product and the process energy required to manufacture the RFG and its components are included. The effects on energy and crude oil use of using various oxygenates to meet the minimum oxygen content level required by the Clean Air Act Amendments are evaluated. The analysis illustrates that production of RFG requires more total energy than that of conventional gasoline but uses less crude oil. The energy and crude oil use requirements of the different RFGs vary considerably. For the same emissions performance level, RFG with ethanol requires substantially more total energy and crude oil than RFG with MTBE or ETBE. A specific proposal by the EPA designed to allow the use of ethanol in RFG would increase the total energy required to produce RFG by 2% and the total crude oil required by 2.0 to 2.5% over that for the base RFG with MTBE.

  17. Energy and crude oil input requirements for the production of reformulated gasolines

    SciTech Connect (OSTI)

    Singh, M.; McNutt, B.

    1993-10-01

    The energy and crude oil requirements for the production of reformulated gasoline (RFG) are estimated. The scope of the study includes both the energy and crude oil embodied in the final product and the process energy required to manufacture the RFG and its components. The effects on energy and crude oil use of employing various oxygenates to meet the minimum oxygen-content level required by the Clean Air Act Amendments are evaluated. The analysis shows that production of RFG requires more total energy, but uses less crude oil, than that of conventional gasoline. The energy and crude oil use requirements of the different RFGs vary considerably. For the same emissions performance level, RFG with ethanol requires substantially more total energy and crude oil than does RFG with methyl tertiary butyl ether (MTBE) or ethyl tertiary butyl ether. A specific proposal by the US Environmental Protection Agency, designed to allow the use of ethanol in RFG, would increase the total energy required to produce RFG by 2% and the total crude oil required by 2.0 to 2.5% over the corresponding values for the base RFG with MTBE.

  18. Ethanol Production and Gasoline Prices: A Spurious Correlation

    E-Print Network [OSTI]

    Smith, Aaron

    Ethanol made from corn comprises 10% of U.S. gasoline, up from 3% in 2003. This dramatic increase was spurred by recent policy initiatives such as the Renewable Fuel Standard and state-level blend mandates and supported ...

  19. Ethanol Demand in United States Production of Oxygenate-limited Gasoline

    SciTech Connect (OSTI)

    Hadder, G.R.

    2000-08-16

    Ethanol competes with methyl tertiary butyl ether (MTBE) to satisfy oxygen, octane, and volume requirements of certain gasolines. However, MTBE has water quality problems that may create significant market opportunities for ethanol. Oak Ridge National Laboratory (ORNL) has used its Refinery Yield Model to estimate ethanol demand in gasolines with restricted use of MTBE. Reduction of the use of MTBE would increase the costs of gasoline production and possibly reduce the gasoline output of U.S. refineries. The potential gasoline supply problems of an MTBE ban could be mitigated by allowing a modest 3 vol percent MTBE in all gasoline. In the U.S. East and Gulf Coast gasoline producing regions, the 3 vol percent MTBE option results in costs that are 40 percent less than an MTBE ban. In the U.S. Midwest gasoline producing region, with already high use of ethanol, an MTBE ban has minimal effect on ethanol demand unless gasoline producers in other regions bid away the local supply of ethanol. The ethanol/MTBE issue gained momentum in March 2000 when the Clinton Administration announced that it would ask Congress to amend the Clean Air Act to provide the authority to significantly reduce or eliminate the use of MTBE; to ensure that air quality gains are not diminished as MTBE use is reduced; and to replace the existing oxygenate requirement in the Clean Air Act with a renewable fuel standard for all gasoline. Premises for the ORNL study are consistent with the Administration announcement, and the ethanol demand curve estimates of this study can be used to evaluate the impact of the Administration principles and related policy initiatives.

  20. Canadian refiner finds simple route to reformulated gasoline production

    SciTech Connect (OSTI)

    Walsh, B. [North Atlantic Refining Ltd., Come By Chance, Newfoundland (Canada); McDonald, G.W.G. [IONA Ltd., Sarasota, FL (United States); Perkins, J.D. [United Catalysts Inc., Louisville, KY (United States)

    1997-03-17

    North Atlantic Refining Ltd. (NARL) operates a 105,000 b/sd hydrocracking refinery at Come By Chance, Newfoundland. NARL sells gasoline into markets in Newfoundland and the northeastern US. When the US Environmental Protection Agency instituted reformulated gasoline (RFG) requirements as part of the Clean Air Act amendments of 1990, NARL had to find a way to meet the specifications, even though the refinery is not within US territory. The refiner chose to add a small hydrogenation unit to treat the portion of the reformate stream containing benzene precursors. Since start-up of the unit in late 1995, it has achieved 100% benzene hydrogenation, thus allowing NARL to easily produce RFG containing less than 1.0 vol% benzene. The paper discusses procurement, hydrogen supply, catalyst, special features, start-up, operations, and process control.

  1. NATCOR -Xpress case study Margaret Oil produces three products: gasoline, jet fuel, and heating oil. The average

    E-Print Network [OSTI]

    Hall, Julian

    NATCOR - Xpress case study Margaret Oil produces three products: gasoline, jet fuel, and heating oil. To produce these products, Margaret purchases crude oil at a price of Ł11 per barrel. Each day to produce gasoline or jet fuel. Distilled oil can be used to produce all three products. The octane level

  2. NATCOR -Xpress case study (advanced) Margaret Oil produces three products: gasoline, jet fuel, and heating oil. The average

    E-Print Network [OSTI]

    Hall, Julian

    NATCOR - Xpress case study (advanced) Margaret Oil produces three products: gasoline, jet fuel, and heating oil. The average octane levels must be at least 8.5 for gasoline, 7 for jet fuel, and 4.5 for heating oil. To produce these products, Margaret can purchase two types of crude oil: crude 1 (at Ł12 per

  3. Gasoline Biodesulfurization Fact Sheet

    Broader source: Energy.gov [DOE]

    This petroleum industry fact sheet describes how biodesulfurization can yield lower sulfur gasoline at lower production costs.

  4. High Efficiency Clean Combustion Engine Designs for Gasoline and Diesel

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12,ExecutiveFinancing ProgramsDepartment of¡ ¢Help DesignPlan

  5. Production of Gasoline and Diesel from Biomass via Fast Pyrolysis,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Financing Tool Fits theCommitteeCrystallineReserve |DemonstrationClean,Product

  6. Refiner and Blender Net Production of Conventional Gasoline

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a. Space

  7. Refiner and Blender Net Production of Finished Motor Gasoline

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a. Space5,168 5,228 5,107ppm752

  8. Refiner and Blender Net Production of Reformulated Gasoline

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a. Space5,168 5,2283,130 2,993

  9. The Impact of Ethanol Production on U.S. and Regional Gasoline Prices and on the Profitability of the U.S. Oil Refinery Industry

    SciTech Connect (OSTI)

    Du, Xiaodong; Hayes, Dermot J.

    2008-04-01

    This report details pooled regional time-series data and panel data estimation used to quantify the impact of monthly ethanol production on monthly retail regular gasoline prices.

  10. Automobile Design A team charged with designing a new automobile is concerned about the gasoline mileage that

    E-Print Network [OSTI]

    Stine, Robert A.

    the gasoline mileage that can be achieved. The team is worried that the car's mileage will result in violations

  11. FEMP Designated Product: Lavatory Faucets

    Broader source: Energy.gov [DOE]

    FEMP suspended its product designation and purchasing specification for commercial faucets until further notice.

  12. TRITIUM PERMEATION AND TRANSPORT IN THE GASOLINE PRODUCTION SYSTEM COUPLED WITH HIGH TEMPERATURE GAS-COOLED REACTORS (HTGRS)

    SciTech Connect (OSTI)

    Chang H. Oh; Eung S. Kim; Mike Patterson

    2011-05-01

    This paper describes scoping analyses on tritium behaviors in the HTGR-integrated gasoline production system, which is based on a methanol-to-gasoline (MTG) plant. In this system, the HTGR transfers heat and electricity to the MTG system. This system was analyzed using the TPAC code, which was recently developed by Idaho National Laboratory. The global sensitivity analyses were performed to understand and characterize tritium behaviors in the coupled HTGR/MTG system. This Monte Carlo based random sampling method was used to evaluate maximum 17,408 numbers of samples with different input values. According to the analyses, the average tritium concentration in the product gasoline is about 3.05×10-3 Bq/cm3, and 62 % cases are within the tritium effluent limit (= 3.7x10-3 Bq/cm3[STP]). About 0.19% of released tritium is finally transported from the core to the gasoline product through permeations. This study also identified that the following four parameters are important concerning tritium behaviors in the HTGR/MTG system: (1) tritium source, (2) wall thickness of process heat exchanger, (3) operating temperature, and (4) tritium permeation coefficient of process heat exchanger. These four parameters contribute about 95 % of the total output uncertainties. This study strongly recommends focusing our future research on these four parameters to improve modeling accuracy and to mitigate tritium permeation into the gasol ine product. If the permeation barrier is included in the future study, the tritium concentration will be significantly reduced.

  13. Consumptive water use in the production of ethanonl and petroleum gasoline.

    SciTech Connect (OSTI)

    Wu, M.; Mintz, M.; Wang, M.; Arora, S.; Energy Systems

    2009-01-30

    The production of energy feedstocks and fuels requires substantial water input. Not only do biofuel feedstocks like corn, switchgrass, and agricultural residues need water for growth and conversion to ethanol, but petroleum feedstocks like crude oil and oil sands also require large volumes of water for drilling, extraction, and conversion into petroleum products. Moreover, in many cases, crude oil production is increasingly water dependent. Competing uses strain available water resources and raise the specter of resource depletion and environmental degradation. Water management has become a key feature of existing projects and a potential issue in new ones. This report examines the growing issue of water use in energy production by characterizing current consumptive water use in liquid fuel production. As used throughout this report, 'consumptive water use' is the sum total of water input less water output that is recycled and reused for the process. The estimate applies to surface and groundwater sources for irrigation but does not include precipitation. Water requirements are evaluated for five fuel pathways: bioethanol from corn, ethanol from cellulosic feedstocks, gasoline from Canadian oil sands, Saudi Arabian crude, and U.S. conventional crude from onshore wells. Regional variations and historic trends are noted, as are opportunities to reduce water use.

  14. Design Case Summary: Production of Gasoline and Diesel from Biomass...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    23% Natural Gas (at 7.68 per square 0.32 16% foot) Catalysts and Chemicals 0.15 7% Waste Disposal 0.01 negligible http:www.biofuels.energy.gov diesel fuel from woody...

  15. Recovery of near-anhydrous ethanol as gasoline additive from fermentation products

    SciTech Connect (OSTI)

    Boukouvalas, C.; Markoulaki, E.; Magoulas, K.; Tassios, D. [National Technical Univ. of Athens (Greece)

    1995-06-01

    The use of near-anhydrous ethanol, obtained from fermentation products through low pressure distillation, as a gasoline additive is examined. To this purpose, a reliable model for predicting the azeotropic composition of an ethanol-water mixture as a function of the pressure is presented. It is developed by considering the available thermodynamic consistent experimental data and using the Wilson and the virial equations for the liquid-and vapor-phase nonideality, respectively. It is concluded that, for an area with no extremely cold winters-minimum ambient temperature -20{degrees}C-alcohol with 96.5%(wt) purity can be used in a 90/10 (vol) gasohol mixture. Such an alcohol can be produced with a single distillation column operating at 140 mmHg pressure with an energy consumption of 5150 kJ/kg of product; or with a system of two columns with lower energy consumption but higher capital cost. These energy consumptions are very sensitive to the accuracy of the predicted azeotropic composition at the operating pressures.

  16. Long Term Processing Using Integrated Hydropyrolysis plus Hydroconversion (IH2) for the Production of Gasoline and Diesel from Biomass

    SciTech Connect (OSTI)

    Marker, Terry; Roberts, Michael; Linck, Martin; Felix, Larry; Ortiz-Toral, Pedro; Wangerow, Jim; McLeod, Celeste; Del Paggio, Alan; Gephart, John; Starr, Jack; Hahn, John

    2013-06-09

    Cellulosic and woody biomass can be directly converted to hydrocarbon gasoline and diesel blending components through the use of a new, economical, technology named integrated hydropyrolysis plus hydroconversion (IH2). The IH2 gasoline and diesel blending components are fully compatible with petroleum based gasoline and diesel, contain less than 1% oxygen and have less than 1 total acid number (TAN). The IH2 gasoline is high quality and very close to a drop in fuel. The life cycle analysis (LCA) shows that the use of the IH2 process to convert wood to gasoline and diesel results in a greater than 90% reduction in greenhouse gas emission compared to that found with fossil derived fuels. The technoeconomic analysis showed the conversion of wood using the IH2 process can produce gasoline and diesel at less than $2.00/gallon. In this project, the previously reported semi-continuous small scale IH2 test results were confirmed in a continuous 50 kg/day pilot plant. The continuous IH2 pilot plant used in this project was operated round the clock for over 750 hours and showed good pilot plant operability while consistently producing 26-28 wt % yields of high quality gasoline and diesel product. The IH2 catalyst showed good stability, although more work on catalyst stability is recommended. Additional work is needed to commercialize the IH2 technology including running large particle size biomass, modeling the hydropyrolysis step, studying the effects of process variables and building and operating a 1-50 ton/day demonstration scale plant. The IH2 is a true game changing technology by utilizing U.S. domestic renewable biomass resources to create transportation fuels, sufficient in quantity and quality to substantially reduce our reliance on foreign crude oil. Thus, the IH2 technology offers a path to genuine energy independence for the U. S., along with the creation of a significant number of new U.S. jobs to plant, grow, harvest, and process biomass crops into fungible fuels.

  17. Gasoline from coal in the state of Illinois: feasibility study. Volume I. Design. [KBW gasification process, ICI low-pressure methanol process and Mobil M-gasoline process

    SciTech Connect (OSTI)

    Not Available

    1980-01-01

    Volume 1 describes the proposed plant: KBW gasification process, ICI low-pressure methanol process and Mobil M-gasoline process, and also with ancillary processes, such as oxygen plant, shift process, RECTISOL purification process, sulfur recovery equipment and pollution control equipment. Numerous engineering diagrams are included. (LTN)

  18. Raman Scattering Sensor for Control of the Acid Alkylation Process in Gasoline Production

    SciTech Connect (OSTI)

    Uibel, Rory, H.; Smith, Lee M.; Benner, Robert, E.

    2006-04-19

    Gasoline refineries utilize a process called acid alkylation to increase the octane rating of blended gasoline, and this is the single most expensive process in the refinery. For process efficiency and safety reasons, the sulfuric acid can only be used while it is in the concentration range of 98 to 86 %. The conventional technique to monitor the acid concentration is time consuming and is typically conducted only a few times per day. This results in running higher acid concentrations than they would like to ensure that the process proceeds uninterrupted. Maintaining an excessively high acid concentration costs the refineries millions of dollars each year. Using SBIR funding, Process Instruments Inc. has developed an inline sensor for real time monitoring of acid concentrations in gasoline refinery alkylation units. Real time data was then collected over time from the instrument and its responses were matched up with the laboratory analysis. A model was then developed to correlate the laboratory acid values to the Raman signal that is transmitted back to the instrument from the process stream. The instrument was then used to demonstrate that it could create real-time predictions of the acid concentrations. The results from this test showed that the instrument could accurately predict the acid concentrations to within ~0.15% acid strength, and this level of prediction proved to be similar or better then the laboratory analysis. By utilizing a sensor for process monitoring the most economic acid concentrations can be maintained. A single smaller refinery (50,000 barrels/day) estimates that they should save over $120,000/year, with larger refineries saving considerably more.

  19. The Performance of Gasoline Fuels and Surrogates in Gasoline...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Performance of Gasoline Fuels and Surrogates in Gasoline HCCI Combustion The Performance of Gasoline Fuels and Surrogates in Gasoline HCCI Combustion Almost 2 dozen gasoline...

  20. Process Design and Economics for the Conversion of Lignocellulosic Biomass to Hydrocarbons via Indirect Liquefaction. Thermochemical Research Pathway to High-Octane Gasoline Blendstock Through Methanol/Dimethyl Ether Intermediates

    SciTech Connect (OSTI)

    Tan, Eric C. D.; Talmadge, Michael; Dutta, Abhijit; Hensley, Jesse; Schaidle, Josh; Biddy, Mary; Humbird, David; Snowden-Swan, Lesley J.; Ross, Jeff; Sexton, Danielle; Yap, Raymond; Lukas, John

    2015-03-01

    This report was developed as part of the U.S. Department of Energy’s Bioenergy Technologies Office’s (BETO’s) efforts to enable the development of technologies for the production of infrastructure-compatible, cost-competitive liquid hydrocarbon fuels from lignocellulosic biomass feedstocks. The research funded by BETO is designed to advance the state of technology of biomass feedstock supply and logistics, conversion, and overall system sustainability. It is expected that these research improvements will be made within the 2022 timeframe. As part of their involvement in this research and development effort, the National Renewable Energy Laboratory and the Pacific Northwest National Laboratory investigate the economics of conversion pathways through the development of conceptual biorefinery process models and techno-economic analysis models. This report describes in detail one potential conversion process for the production of high-octane gasoline blendstock via indirect liquefaction of biomass. The processing steps of this pathway include the conversion of biomass to synthesis gas or syngas via indirect gasification, gas cleanup, catalytic conversion of syngas to methanol intermediate, methanol dehydration to dimethyl ether (DME), and catalytic conversion of DME to high-octane, gasoline-range hydrocarbon blendstock product. The conversion process configuration leverages technologies previously advanced by research funded by BETO and demonstrated in 2012 with the production of mixed alcohols from biomass. Biomass-derived syngas cleanup via reforming of tars and other hydrocarbons is one of the key technology advancements realized as part of this prior research and 2012 demonstrations. The process described in this report evaluates a new technology area for the downstream utilization of clean biomass-derived syngas for the production of high-octane hydrocarbon products through methanol and DME intermediates. In this process, methanol undergoes dehydration to DME, which is subsequently converted via homologation reactions to high-octane, gasoline-range hydrocarbon products.

  1. Human-Centered Sustainable Product Design

    E-Print Network [OSTI]

    Agogino, Alice M.

    Inquiry ­! Green Building Design !! Week 2 ­! Brainstorming and Creative Design ­! Life Cycle Analysis / Sustainability Needs Human- centered design Uneconomical green design Unadopted green systems Sustainable systemsHuman-Centered Sustainable Product Design !!Module Overview !!Need Finding Methods 1 ME Module

  2. Ethanol Demand in United States Regional Production of Oxygenate-limited Gasoline

    SciTech Connect (OSTI)

    Hadder, G.R.

    2000-08-01

    The Energy Policy Act of 1992 (the Act) outlined a national energy strategy that called for reducing the nation's dependency on petroleum imports. The Act directed the Secretary of Energy to establish a program to promote and expand the use of renewable fuels. The Office of Transportation Technologies (OTT) within the U.S. Department of Energy (DOE) has evaluated a wide range of potential fuels and has concluded that cellulosic ethanol is one of the most promising near-term prospects. Ethanol is widely recognized as a clean fuel that helps reduce emissions of toxic air pollutants. Furthermore, cellulosic ethanol produces less greenhouse gas emissions than gasoline or any of the other alternative transportation fuels being considered by DOE.

  3. Reformulated gasoline quality issues

    SciTech Connect (OSTI)

    Gonzalez, R.G.; Felch, D.E.; Edgar, M.D.

    1995-11-01

    One year ago, a panel of industry experts were interviewed in the November/December 1994 issue of Fuel Reformulation (Vol. 4, No. 6). With the focus then and now on refinery investments, the panelists were asked to forecast which refining processes would grow in importance. It is apparent from their response, and from other articles and discussions throughout the year, that hydroprocessing and catalytic conversion processes are synergistic in the overall refinery design, with flexibility and process objectives varying on a unit-by-unit case. To an extent, future refinery investments in downstream petrochemicals, such as for paraxylene production, are based on available catalytic reforming feedstock. Just a importantly, hydroprocessing units (hydrotreating, hydrocracking) needed for clean fuel production (gasoline, diesel, aviation fuel), are heavily dependent on hydrogen production from the catalytic reformer. Catalytic reforming`s significant influence in the refinery hydrogen balance, as well as its status as a significant naphtha conversion route to higher-quality fuels, make this unit a high-priority issue for engineers and planners striving for flexibility.

  4. State Gasoline Taxes

    E-Print Network [OSTI]

    Learned, Edmund Philip

    1925-03-15

    of one cent per gallon on gasoline and naptha would yield at the present estimated production, $10,000,000.,>1 At that time the United States Government was having heavy expenses to meet. The European war had begun and there was a great deal... Report 767, 65th Congress, 2nd Session. 4. Laws of Oregon, 1919, Chapter 159. 5. Engineering News-Record, 91:967. (December 13, 1923.) 287] Learned: State Gasoline Taxes 9 registered 7,580,105 automobiles and motor trucks. At pres ent, there are over...

  5. Multiscale Strategic Planning Model for the Design of Integrated Ethanol and Gasoline Supply Chain

    E-Print Network [OSTI]

    Grossmann, Ignacio E.

    and Security Act of 2007 from the US, where the goal is to accomplish the production of 16 billion gallons of cellulosic biofuels by 2022 (Energy Independence and Security Act of 2007; National Biofuels Action Plan optimized production processes taking into account the use of raw materials, water and energy for first

  6. Gasoline from coal in the state of Illinois: feasibility study. Appendix 1. Design

    SciTech Connect (OSTI)

    Not Available

    1980-01-01

    Appendix 1 includes the overall design philosophy about units in parallel, specifications above actual need, spares maintenance, etc. Most of the report involves engineering work sheets for various equipments. (LTN)

  7. Product Design Specifications Starting Product Development Projects Right

    E-Print Network [OSTI]

    Salustri, Filippo A.

    Product Design Specifications Starting Product Development Projects Right Filippo A What? How? teams must solve same problem unfettered innovation v.risk management need to created balanced designs a structured control document a thinking tool a collaboration tool promotes innovation

  8. Teaching Design for Environment in Product Design Classes

    E-Print Network [OSTI]

    Baeriswyl, Michael C.

    The paper presents an approach to teaching design for environment (DFE) in the context of a product design and development course. The teaching method has been applied in our classes for graduate engineering, business, and ...

  9. Data mining in design of products and production systems

    E-Print Network [OSTI]

    Kusiak, Andrew

    Data mining in design of products and production systems Andrew Kusiak *, Matthew Smith Intelligent Data mining is acquiring its own identity by refining concepts from other disciplines, developing affected by the data mining pursuit. This paper outlines areas of product and manufacturing system design

  10. SP.778 Toy Product Design, Spring 2006

    E-Print Network [OSTI]

    Kudrowitz, Barry

    This course is an introduction to the product design process with an emphasis on designing for children and entertainment. Students will work in small teams to develop a working prototype of a toy. Throughout the semester ...

  11. Teaching product development by deterministic design

    E-Print Network [OSTI]

    Graham, Marc Miller

    2006-01-01

    The objective of this work was to develop a deterministic design and teaching process for the creation of new products ranging from books, to music, to consumer products. The foundation of the process is the Peer-Review ...

  12. Universal Product Design: Transforming User Activity Into Product Function 

    E-Print Network [OSTI]

    Kostovich, Vincent

    2010-07-14

    Many people have disabilities and would like to have all of the amenities typical of daily life. Universal product design is important in designing for the disabled and creating user-friendly products for all people. The goal of this thesis...

  13. With Mathematica Gasoline Inventory

    E-Print Network [OSTI]

    Reiter, Clifford A.

    Preprint 1 With Mathematica and J: Gasoline Inventory Simulation Cliff Reiter Computational for the number of gallons of gasoline sold by a station for a thousand weeks. The pattern involves demands with the delivery and storage of the gasoline and we desire not to run out of gasoline or exceed the station

  14. Weelchair exercise roller product design

    E-Print Network [OSTI]

    Su, Benjamin W

    2005-01-01

    Inspired by bicycle training rollers, a wheelchair exercise roller (an exercise machine for the application of wheelchair users) was designed from conception of idea to alpha prototype. Background and market data was ...

  15. Turn of the century refueling: A review of innovations in early gasoline refueling methods and analogies for hydrogen

    E-Print Network [OSTI]

    Melaina, Marc W

    2007-01-01

    Gasoline accounted for less than 10 percent of the volume of products recovered from the distillation

  16. Multi-Period Production Capacity Planning for Integrated Product and Production System Design*

    E-Print Network [OSTI]

    Saitou, Kazuhiro "Kazu"

    Multi-Period Production Capacity Planning for Integrated Product and Production System Design* Emre.ac.uk kazu@umich.edu .Abstract ­ This paper presents a simulation-based method to aid multi-period production capacity planning by quantifying the trade-off between product quality and production cost. The product

  17. Platform Design forPlatform Design for Customizable Products withCustomizable Products with

    E-Print Network [OSTI]

    (MPa) Volume (m^3) Market Demand (random) How can I handle this complex demand scenario? S2 S320 30 VPlatform Design forPlatform Design for Customizable Products withCustomizable Products with Non of Technology Atlanta, Georgia DETC2004/DTM-57469 Proceedings of DETC'04 ASME 2004 Design Engineering Technical

  18. Reformulating Competition? Gasoline Content Regulation and Wholesale Gasoline Prices

    E-Print Network [OSTI]

    Brown, Jennifer; Hastings, Justine; Mansur, Erin T.; Villas-Boas, Sofia B

    2007-01-01

    the underlying gasoline than does blending with MTBE. Hence,gasoline like CARB, it effectively differentiated the market. Blending

  19. Design Case Summary: Production of Gasoline and Diesel from Biomass via

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum Based| Department8, 20153Danielthrough theKDesert Peak EGS Project DOEDesignFast

  20. PLUTONIUM-238 PRODUCTION TARGET DESIGN STUDIES

    SciTech Connect (OSTI)

    Hurt, Christopher J [ORNL; Wham, Robert M [ORNL; Hobbs, Randall W [ORNL; Owens, R Steven [ORNL; Chandler, David [ORNL; Freels, James D [ORNL; Maldonado, G Ivan [ORNL

    2014-01-01

    A new supply chain is planned for plutonium-238 using existing reactors at the Oak Ridge National Laboratory (ORNL) and Idaho National Laboratory (INL) and existing chemical recovery facilities at ORNL. Validation and testing activities for new irradiation target designs have been conducted in three phases over a 2 year period to provide data for scale-up to production. Target design, qualification, target fabrication, and irradiation of fully-loaded targets have been accomplished. Data from post-irradiation examination (PIE) supports safety analysis and irradiation of future target designs.

  1. A Market-Driven Approach to Product Family Design A Market-Driven Approach to Product Family Design

    E-Print Network [OSTI]

    Chen, Wei

    A Market-Driven Approach to Product Family Design 1 A Market-Driven Approach to Product Family@psu.edu. #12;A Market-Driven Approach to Product Family Design 2 A Market-Driven Approach to Product Family research interests are in demand modeling, decision-based design, and market-driven product family design

  2. Principles of Green Design: Analyzing User Activities and Product Feedback 

    E-Print Network [OSTI]

    Esposito, Nicole 1988-

    2011-04-20

    This study investigated the design principles applicable to environmentally friendly product design. A practical approach was taken to examine principles that aid designers in producing an eco-friendly product that consumers will enjoy and use...

  3. Managing Product Variety inManaging Product Variety in the Design of Platforms forthe Design of Platforms for

    E-Print Network [OSTI]

    (MPa) Volume (m^3) Market Demand (random) How can I handle this complex demand scenario? Average ProfitManaging Product Variety inManaging Product Variety in the Design of Platforms forthe Design principles for designing product architectures that facilitate the production of customized products

  4. Reformulating Competition? Gasoline Content Regulation and Wholesale Gasoline Prices

    E-Print Network [OSTI]

    Brown, Jennifer; Hastings, Justine; Mansur, Erin T.; Villas-Boas, Sofia B

    2007-01-01

    and Heterogeneity in U.S. Gasoline Prices, working paper,and J. M . Perloff, 2002. Gasoline Price Differences: Taxes,Gardner, K.W. , 2004. U.S. Gasoline Requirements, ExxonMobil

  5. Life Cycle Assessment of Gasoline and Diesel Produced via Fast Pyrolysis and Hydroprocessing

    SciTech Connect (OSTI)

    Hsu, D. D.

    2011-03-01

    In this work, a life cycle assessment (LCA) estimating greenhouse gas (GHG) emissions and net energy value (NEV) of the production of gasoline and diesel from forest residues via fast pyrolysis and hydroprocessing, from production of the feedstock to end use of the fuel in a vehicle, is performed. The fast pyrolysis and hydrotreating and hydrocracking processes are based on a Pacific Northwest National Laboratory (PNNL) design report. The LCA results show GHG emissions of 0.142 kg CO2-equiv. per km traveled and NEV of 1.00 MJ per km traveled for a process using grid electricity. Monte Carlo uncertainty analysis shows a range of results, with all values better than those of conventional gasoline in 2005. Results for GHG emissions and NEV of gasoline and diesel from pyrolysis are also reported on a per MJ fuel basis for comparison with ethanol produced via gasification. Although pyrolysis-derived gasoline and diesel have lower GHG emissions and higher NEV than conventional gasoline does in 2005, they underperform ethanol produced via gasification from the same feedstock. GHG emissions for pyrolysis could be lowered further if electricity and hydrogen are produced from biomass instead of from fossil sources.

  6. Techno-economic Analysis for the Conversion of Lignocellulosic Biomass to Gasoline via the Methanol-to-Gasoline (MTG) Process

    SciTech Connect (OSTI)

    Jones, Susanne B.; Zhu, Yunhua

    2009-05-01

    Biomass is a renewable energy resource that can be converted into liquid fuel suitable for transportation applications. As a widely available biomass form, lignocellulosic biomass can have a major impact on domestic transportation fuel supplies and thus help meet the Energy Independence and Security Act renewable energy goals (U.S. Congress 2007). With gasification technology, biomass can be converted to gasoline via methanol synthesis and methanol-to-gasoline (MTG) technologies. Producing a gasoline product that is infrastructure ready has much potential. Although the MTG technology has been commercially demonstrated with natural gas conversion, combining MTG with biomass gasification has not been shown. Therefore, a techno-economic evaluation for a biomass MTG process based on currently available technology was developed to provide information about benefits and risks of this technology. The economic assumptions used in this report are consistent with previous U.S. Department of Energy Office of Biomass Programs techno-economic assessments. The feedstock is assumed to be wood chips at 2000 metric ton/day (dry basis). Two kinds of gasification technologies were evaluated: an indirectly-heated gasifier and a directly-heated oxygen-blown gasifier. The gasoline selling prices (2008 USD) excluding taxes were estimated to be $3.20/gallon and $3.68/gallon for indirectly-heated gasified and directly-heated. This suggests that a process based on existing technology is economic only when crude prices are above $100/bbl. However, improvements in syngas cleanup combined with consolidated gasoline synthesis can potentially reduce the capital cost. In addition, improved synthesis catalysts and reactor design may allow increased yield.

  7. Production plant separator system conceptual design

    SciTech Connect (OSTI)

    Ng, E.; Kan, T.

    1994-12-31

    A full conceptual design has been completed for a Uranium Atomic Vapor Laser Isotope Separation (U-AVLIS) production plant capable of producing {approximately}1700 metric tons of enriched uranium per year (MTU/y). This plant is the first step in the deployment of AVLIS enrichment technology, which will provide inexpensive, dependable, and environmentally safe uranium enrichment services to utility customers. Previous issues of the ISAM Semiannual Report describe other major systems in the plant, namely the laser, feed and product systems. This article describes the design of the separator system. The separator system is a a key component in the plant. After the feed conversion system converts uranium trioxide (UO{sub 3}) to a uranium-iron alloy, the alloy enters the separator system. In the separator, and intense electron beam vaporizes uranium metal in a vacuum chamber. In the laser system, fixed-frequency copper-vapor lasers pump tunable dye lasers. These precisely tuned dye lasers then selectively excite and ionize uranium-235 atoms in the vapor stream, leaving the uranium-238 atoms untouched. The photo-ions of uranium-235 are then drawn to an electrically biased collector, producing the enriched product stream. The remaining vapor flows through, producing the depleted tails stream. Both product and tails streams are continuously removed from the separator pod as flowing liquid uranium metal. Withdrawal containers are used to collect separately the enriched and depleted uranium. The enriched product will be converted by fuel fabricators to uranium dioxide (UO{sub 2}) and used to fabricate reactor fuel assemblies for utility customers.

  8. Design Case Summary: Production of Mixed Alcohols from Municipal...

    Office of Environmental Management (EM)

    place in the future. This design case establishes cost targets for converting MSW to ethanol and other mixed alcohols via gasification. Design Case Summary: Production of Mixed...

  9. Gasoline from Wood via Integrated Gasification, Synthesis, and Methanol-to-Gasoline Technologies

    SciTech Connect (OSTI)

    Phillips, S. D.; Tarud, J. K.; Biddy, M. J.; Dutta, A.

    2011-01-01

    This report documents the National Renewable Energy Laboratory's (NREL's) assessment of the feasibility of making gasoline via the methanol-to-gasoline route using syngas from a 2,000 dry metric tonne/day (2,205 U.S. ton/day) biomass-fed facility. A new technoeconomic model was developed in Aspen Plus for this study, based on the model developed for NREL's thermochemical ethanol design report (Phillips et al. 2007). The necessary process changes were incorporated into a biomass-to-gasoline model using a methanol synthesis operation followed by conversion, upgrading, and finishing to gasoline. Using a methodology similar to that used in previous NREL design reports and a feedstock cost of $50.70/dry ton ($55.89/dry metric tonne), the estimated plant gate price is $16.60/MMBtu ($15.73/GJ) (U.S. $2007) for gasoline and liquefied petroleum gas (LPG) produced from biomass via gasification of wood, methanol synthesis, and the methanol-to-gasoline process. The corresponding unit prices for gasoline and LPG are $1.95/gallon ($0.52/liter) and $1.53/gallon ($0.40/liter) with yields of 55.1 and 9.3 gallons per U.S. ton of dry biomass (229.9 and 38.8 liters per metric tonne of dry biomass), respectively.

  10. An innovative concept for deep water oil production platform design 

    E-Print Network [OSTI]

    Racine, Florian

    1994-01-01

    As more oil and gas are discovered in deep water, the offshore industry has become increasingly interested in the design of deep water offshore production facilities. A new design concept tentatively called FPSOT (Floating Production, Storage...

  11. Work Structuring to Achieve Integrated ProductProcess Design

    E-Print Network [OSTI]

    Tommelein, Iris D.

    Work Structuring to Achieve Integrated Product­Process Design Cynthia C. Y. Tsao, A.M.ASCE1 ; Iris presents "work structuring," a term used to describe the effort of integrating product and process design product and process design. We propose shifting the focus of work structuring from maximizing local trade

  12. A Systematic Approach for the Design of Integrated Energy and Chemicals Production 

    E-Print Network [OSTI]

    Noureldin, Mohamed Mahmoud

    2014-12-02

    on CO2 and H2O production, energy input and carbon deposition in dry reforming (P = 1 bar) ............................................ 36 Figure 12: Impact of CO2 sequestration on the maximum economic potential for hydrogen production... combined reformer ............... 131 xi LIST OF TABLES Page Table 1: Stoichiometric synfuel yield of various biomass constituents ............................. 8 Table 2: Gasoline yield of various biomass components...

  13. MTBE, Oxygenates, and Motor Gasoline (Released in the STEO October 1999)

    Reports and Publications (EIA)

    1999-01-01

    The blending of methyl tertiary butyl ether (MTBE) into motor gasoline has increased dramatically since it was first produced 20 years ago. MTBE usage grew in the early 1980's in response to octane demand resulting initially from the phaseout of lead from gasoline and later from rising demand for premium gasoline. The oxygenated gasoline program stimulated an increase in MTBE production between 1990 and 1994. MTBE demand increased from 83,000 in 1990 to 161,000 barrels per day in 1994. The reformulated gasoline (RFG) program provided a further boost to oxygenate blending. The MTBE contained in motor gasoline increased to 269,000 barrels per day by 1997.

  14. Advanced Particulate Filter Technologies for Direct Injection Gasoline Engine Applications

    Broader source: Energy.gov [DOE]

    Specific designs and material properties have to be developed for gasoline particulate filters based on the different engine and exhaust gas characteristic of gasoline engines compared to diesel engines, e.g., generally lower levels of engine-out particulate emissions or higher GDI exhaust gas temperatures

  15. Process for conversion of lignin to reformulated hydrocarbon gasoline

    DOE Patents [OSTI]

    Shabtai, Joseph S. (Salt Lake City, UT); Zmierczak, Wlodzimierz W. (Salt Lake City, UT); Chornet, Esteban (Golden, CO)

    1999-09-28

    A process for converting lignin into high-quality reformulated hydrocarbon gasoline compositions in high yields is disclosed. The process is a two-stage, catalytic reaction process that produces a reformulated hydrocarbon gasoline product with a controlled amount of aromatics. In the first stage, a lignin material is subjected to a base-catalyzed depolymerization reaction in the presence of a supercritical alcohol as a reaction medium, to thereby produce a depolymerized lignin product. In the second stage, the depolymerized lignin product is subjected to a sequential two-step hydroprocessing reaction to produce a reformulated hydrocarbon gasoline product. In the first hydroprocessing step, the depolymerized lignin is contacted with a hydrodeoxygenation catalyst to produce a hydrodeoxygenated intermediate product. In the second hydroprocessing step, the hydrodeoxygenated intermediate product is contacted with a hydrocracking/ring hydrogenation catalyst to produce the reformulated hydrocarbon gasoline product which includes various desirable naphthenic and paraffinic compounds.

  16. A Dozen Reasons for Raising Gasoline Taxes

    E-Print Network [OSTI]

    Wachs, Martin

    2003-01-01

    States have the right gasoline tax? University of Californiajuly). A primer on gasoline prices. http://www.eia.gov/pub/Reasons for Raising Gasoline Taxes Martin Wachs RESEARCH

  17. Incidence of Federal and State Gasoline Taxes

    E-Print Network [OSTI]

    Chouinard, Hayley; Perloff, Jeffrey M.

    2003-01-01

    State Specific * Share of Gasoline State Specific * (Share of Gasoline) 2 StateSpecific * (Share of Gasoline) 3 State Specific * (Share of

  18. Market Power in California's Gasoline Market

    E-Print Network [OSTI]

    Borenstein, Severin; Bushnell, James; Lewis, Matthew

    2004-01-01

    Price Study Kayser, Hilke A. , 2000. Gasoline Demand andCar Choice: Estimating Gasoline Demand Using HouseholdIN GASOLINE MARKETS.

  19. Stock Analysis with Correlation for Gasoline Companies

    E-Print Network [OSTI]

    Sun, Yi Xin

    2015-01-01

    with Correlation for Gasoline Companies A thesis submittedwith Correlation for Gasoline Companies by Yi Xin Sun Masterstudied to major gasoline companies based in United States.

  20. Design and Production Interface in Lean Production: A Performance Improvement Criteria Proposition Proceedings IGLC `98

    E-Print Network [OSTI]

    Tommelein, Iris D.

    Design and Production Interface in Lean Production: A Performance Improvement Criteria Proposition Proceedings IGLC `98 DESIGN AND PRODUCTION INTERFACE IN LEAN PRODUCTION: A PERFORMANCE IMPROVEMENT CRITERIA PROPOSITION Eduardo L. Isatto1 and Carlos T. Formoso2 ABSTRACT Failures on transferring Japanese production

  1. Capital and operating cost estimates. Volume I. Preliminary design and assessment of a 12,500 BPD coal-to-methanol-to-gasoline plant. [Grace C-M-G Plant, Henderson County, Kentucky

    SciTech Connect (OSTI)

    Not Available

    1982-08-01

    This Deliverable No. 18b - Capital and Operating Cost Estimates includes a detailed presentation of the 12,500 BPD coal-to-methanol-to-gasoline plant from the standpoint of capital, preoperations, start-up and operations cost estimation. The base capital cost estimate in June 1982 dollars was prepared by the Ralph M. Parsons Company under the direction of Grace. The escalated capital cost estimate as well as separate estimates for preoperations, startup and operations activities were developed by Grace. The deliverable consists of four volumes. Volume I contains details of methodology used in developing the capital cost estimate, summary information on a base June 1982 capital cost, details of the escalated capital cost estimate and separate sections devoted to preoperations, start-up, and operations cost. The base estimate is supported by detailed information in Volumes II, III and IV. The degree of detail for some units was constrained due to proprietary data. Attempts have been made to exhibit the estimating methodology by including data on individual equipment pricing. Proprietary details are available for inspection upon execution of nondisclosure and/or secrecy agreements with the licensors to whom the data is proprietary. Details of factoring certain pieces of equipment and/or entire modules or units from the 50,000 BPD capital estimate are also included. In the case of the escalated capital estimate, Grace has chosen to include a sensitivity analysis which allows for ready assessment of impacts of escalation rates (inflation), contingency allowances and the construction interest financing rates on the escalated capital cost. Each of the estimates associated with bringing the plant to commercial production rates has as a basis the schedule and engineering documentation found in Deliverable No. 14b - Process Engineering and Mechanical Design Report, No. 28b - Staffing Plans, No. 31b - Construction Plan, and No. 33b - Startup and Operation Plan.

  2. Generalized Graph Products for Network Design and Analysis

    E-Print Network [OSTI]

    Roughan, Matthew

    Generalized Graph Products for Network Design and Analysis Eric Parsonage, Hung X. Nguyen, Rhys--Network design, as it is currently practiced, involves putting devices together to create a network. However as a whole object. In this paper we develop generalized graph products that allow the mathematical design

  3. Material and Product Design Integration: Establishing Relationships between Design Variables of Both Domains

    E-Print Network [OSTI]

    Lu, Wen Feng

    Due to the increasing demand of application-specific and/or multi-functional materials, it is necessary to integrate material design and product design. To support such design integration, this paper proposes a methodology ...

  4. The potential for low petroleum gasoline

    SciTech Connect (OSTI)

    Hadder, G.R.; Webb, G.M.; Clauson, M.

    1996-06-01

    The Energy Policy Act requires the Secretary of Energy to determine the feasibility of producing sufficient replacement fuels to replace at least 30 percent of the projected consumption of motor fuels by light duty vehicles in the year 2010. The Act also requires the Secretary to determine the greenhouse gas implications of the use of replacement fuels. A replacement fuel is a non-petroleum portion of gasoline, including certain alcohols, ethers, and other components. The Oak Ridge National Laboratory Refinery Yield Model has been used to study the cost and refinery impacts for production of {open_quotes}low petroleum{close_quotes} gasolines, which contain replacement fuels. The analysis suggests that high oxygenation is the key to meeting the replacement fuel target, and a major contributor to cost increase is investment in processes to produce and etherify light olefins. High oxygenation can also increase the costs of control of vapor pressure, distillation properties, and pollutant emissions of gasolines. Year-round low petroleum gasoline with near-30 percent non-petroleum components might be produced with cost increases of 23 to 37 cents per gallon of gasoline, and with greenhouse gas emissions changes between a 3 percent increase and a 16 percent decrease. Crude oil reduction, with decreased dependence on foreign sources, is a major objective of the low petroleum gasoline program. For year-round gasoline with near-30 percent non-petroleum components, crude oil use is reduced by 10 to 12 percent, at a cost $48 to $89 per barrel. Depending upon resolution of uncertainties about extrapolation of the Environmental Protection Agency Complex Model for pollutant emissions, availability of raw materials and other issues, costs could be lower or higher.

  5. FCC Tail Gas olefins conversion to gasoline via catalytic distillation with aromatics

    SciTech Connect (OSTI)

    Partin, E.E. (Brown and Root U.S.A., Inc., Houston, TX (US))

    1988-01-01

    The goal of every refiner is to continually improve profitability by such means as increasing gasoline production, increasing gasoline octane pool and in cases where fuel balance becomes a problem, decreasing refinery fuel gas production. A new refinery process is currently being developed which accomplish these goals. Chemical Research and Licensing Company (CR and L) developed Catalytic Distillation technology in 1978 to produce MTBE. They have since used the Catalytic Distillation technique to produce cumene. CR and L has further developed this technology to convert olefin gases currently consumed as refinery fuel, to high octane gasoline components. The process, known as CATSTILL, alkylates olefin gases such as ethylene, propylene and butylene, present in FCC Tail Gas with light aromatics such as benzene, toluene and xylene, present in reformate, to produce additional quantities of high octane gasoline components. A portable CATSTILL demonstration plant has been constructed by Brown and Root U.S.A., under an agreement with CR and L, for placement in a refinery to further develop data necessary to design commercial plants. This paper presents current data relative to the CATSTILL development.

  6. Characteristics of successful risk management in product design

    E-Print Network [OSTI]

    Olechowski, Alison Louise

    The paper reports results of one of the largest empirical studies to-date on the impact of design risk management practices on product design success. Through a survey of 224 practices, 38 (in 7 categories) where found to ...

  7. New product development methods : a study of open design

    E-Print Network [OSTI]

    Smith, Ariadne G. (Ariadne Genevičve)

    2012-01-01

    This thesis explores the application of open design to the process of developing physical products. Open design is a type of decentralized innovation that is derived from applying principles of open source software and ...

  8. Design and Optimization of a Biochemical Production Platform...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Review Eric J. Steen, Ph.D. Lygos, Inc. DESIGN & OPTIMIZATION OF A BIOCHEMICAL PRODUCTION PLATFORM WITH BIOSENSOR-GUIDED SYNTHETIC EVOLUTION 2 CELLULOSIC SUGARS MALONYL-COA...

  9. Design, Construction, and Implementation of Novel Biofuel Production...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Design, Construction, and Implementation of Novel Biofuel Production Capabilities in Filamentous Fungi March 26, 2015 Technology Area Review Kenneth S. Bruno Pacific Northwest...

  10. Plant Design for the Production of DUAGG

    SciTech Connect (OSTI)

    Ferrada, J.J.

    2003-02-04

    The cost of producing DUAGG is an important consideration for any interested private firm in determining whether DUCRETE is economically viable as a material of construction in next-generation spent nuclear fuel casks. This study analyzed this project as if it was a stand-alone project. The capital cost includes engineering design, equipment costs and installation, start up, and management; the study is not intended to be a life-cycle cost analysis. The costs estimated by this study are shown in Table ES.1, and the conclusions of this study are listed in Table ES.2. The development of DUAGG and DUCRETE is a major thrust of the Depleted Uranium Uses Research and Development Project. An obvious use of depleted uranium is as a shielding material (e.g., DUCRETE). DUCRETE is made by replacing the conventional stone aggregate in concrete with DUAGG. One objective of this project is to bring the development of DUCRETE to a point at which a demonstrated basis exists for its commercial deployment. The estimation of the costs to manufacture DUAGG is an important part of this effort. Paul Lessing and William Quapp developed DUAGG and DUCRETE as part of an Idaho National Engineering and Environmental Laboratory (INEEL) program to find beneficial uses for depleted uranium (DU). Subsequently, this technology was licensed to Teton Technologies, Inc. The DUAGG process mixes DUO{sub 2} with sintering materials and additives to form pressed briquettes. These briquettes are sintered at 1300 C, and the very dense sintered briquettes are then crushed and classified into gap-graded size fractions. The graded DUAGG is then ready to be used to make high-strength heavy DUCRETE. The DUCRETE shielding will be placed into an annular steel cask-shell mold, which has internal steel reinforcing bars. The objectives of this study are to (1) use previous DUAGG process developments to design a plant that will produce DUAGG at a baseline rate, (2) determine the size of the equipment required to meet the DUAGG production scale, (3) estimate the facility's capital and operating costs, and (4) perform a parametric sensitivity analysis on those elements of cost that most affect the total operating expenses. Because the study does not include preoperational, decontamination, decommissioning, and closure costs, it cannot be considered a complete life-cycle cost analysis. However, the purpose of this analysis is to establish the potential viability of the DUAGG process as a private commercial venture to meet a market demand for advanced spent nuclear fuel (SNF) storage and transport casks.

  11. Advanced Gasoline Turbocharged Direct Injection (GTDI) Engine...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Vehicle Technologies Office Merit Review 2014: Advanced Gasoline Turbocharged Direct Injection (GTDI) Engine Development Advanced Gasoline Turbocharged Direct Injection...

  12. Short-Term Energy Outlook Model Documentation: Petroleum Product Prices Module

    Reports and Publications (EIA)

    2015-01-01

    The petroleum products price module of the Short-Term Energy Outlook (STEO) model is designed to provide U.S. average wholesale and retail price forecasts for motor gasoline, diesel fuel, heating oil, and jet fuel.

  13. Product Design for Energy: An Inverted Pyramid Approach 

    E-Print Network [OSTI]

    Gopalakrishnan, B.; Alkadi, N. M.; Plummer, R. W.

    2002-01-01

    bgopalak@mall.wvu.edu ABSTRACT The product design function is important within the spectrum of the product life cycle. Manufacturing processes are likely to consume much energy, as evidenced in aluminium and steel industries. The product design... materials such as aluminium and cast iron lend themselves to casting more easily than machining on account of their properties. Greater the hardness of the material more difficult it may be to machine. The product geometry may be critical in terms...

  14. Portuguese refiner starts up new gasoline complex

    SciTech Connect (OSTI)

    Not Available

    1995-03-13

    Petroleos de Portugal S.A. (Petrogal) has started up a new $85 million gasoline complex at its Sines, Portugal, refinery. The complex includes HF alkylation and Hydrisom units. The refinery also has completed an overall $650 million upgrade that includes a new visbreaker and vacuum column. Petrogal says the project has increased gasoline production to about 30,000 b/d. Major units constructed for the overall refinery expansion included: a 35,000 b/sd FCCU; a 26,000 b/sd visbreaker; a 45,000 b/sd vacuum distillation unit; two extractive mercaptan columns; an amylene treater; a sulfur-recovery system; and an 8,000 b/sd alkylation complex. The paper describes the gasoline complex, laboratory, safety, control room operation, and start-up.

  15. Is the gasoline tax regressive?

    E-Print Network [OSTI]

    Poterba, James M.

    1990-01-01

    Claims of the regressivity of gasoline taxes typically rely on annual surveys of consumer income and expenditures which show that gasoline expenditures are a larger fraction of income for very low income households than ...

  16. Designer proton-channel transgenic algae for photobiological hydrogen production

    DOE Patents [OSTI]

    Lee, James Weifu (Knoxville, TN)

    2011-04-26

    A designer proton-channel transgenic alga for photobiological hydrogen production that is specifically designed for production of molecular hydrogen (H.sub.2) through photosynthetic water splitting. The designer transgenic alga includes proton-conductive channels that are expressed to produce such uncoupler proteins in an amount sufficient to increase the algal H.sub.2 productivity. In one embodiment the designer proton-channel transgene is a nucleic acid construct (300) including a PCR forward primer (302), an externally inducible promoter (304), a transit targeting sequence (306), a designer proton-channel encoding sequence (308), a transcription and translation terminator (310), and a PCR reverse primer (312). In various embodiments, the designer proton-channel transgenic algae are used with a gas-separation system (500) and a gas-products-separation and utilization system (600) for photobiological H.sub.2 production.

  17. How to implement a gasoline pool lead phase-down

    SciTech Connect (OSTI)

    Al-Mutaz, I.S. [King Saud Univ., Riyadh (Saudi Arabia)

    1996-02-01

    Some operational changes can be made for immediate reduction of lead concentration of gasoline that require no capital investment. For a further lead reduction, installing new refinery units and/or modifications to existing ones are required. The production of unleaded gasoline in the Riyadh refinery required improvement of the clear research octane number (RON) of light naphtha, light isomerate and reformate. However, only a once-through isomerization unit is needed if MTBE blending is planned. The paper describes how the Riyadh refinery in Saudi Arabia phased lead from their gasoline production.

  18. Finished Motor Gasoline Net Production

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets 9,WhyConsumption6 Weekly5Data Series:

  19. Product Supplied for Finished Gasoline

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160

  20. COSTS MODELS IN DESIGN AND MANUFACTURING OF SAND CASTING PRODUCTS

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    COSTS MODELS IN DESIGN AND MANUFACTURING OF SAND CASTING PRODUCTS Nicolas PERRY Ass. Prof., IRCCy.Bernard@irccyn.ec-nantes.fr Abstract: In the early phases of the product life cycle, the costs controls became a major decision tool difficulties, we will present an approach using a concept of cost entity related to the design and realization

  1. Gasoline volatility: Environmental interactions with blending and processing

    SciTech Connect (OSTI)

    Unzelman, G.H. [ed.

    1996-05-01

    Gasoline volatility has long been an economic consideration for petroleum refiners. Although front-end volatility and Rvp (Reid vapor pressure) are primary factors, volatility can impact any part of the distillation range. Specifications, whether in-house, exchange or pipeline, require flexibility to optimize the bottom line with respect to marketed composition. Utilizing lower-value butanes, within Rvp and ASTM distillation limits, to maximize gasoline volume has been traditional. Also, optimizing the T{sub 90} (ASTM distillation temperature at 90% distilled), raises the end point and has been used to extend the gasoline barrel. In most refining situations, controlling back-end gasoline volatility is a function of gasoline vs. distillate volume, the latter generally the lower-value product. Recently, the concept of gasoline reformulation collide with the less complex approach of simply reducing vapor pressure to improve air quality. Reducing Rvp of gasoline shifts front-end composition, while reformulation, especially under future Complex Model rules, shifts volatility and composition over the entire boiling range. While low Rvp vs. RFG is a recent issue, gasoline volatility has always been an economic factor in petroleum refining and a performance factor for the auto maker.

  2. Human-Centered Sustainable Product Design

    E-Print Network [OSTI]

    Agogino, Alice M.

    !! Forecasting demand !! Ready to launch? Early concept testing questions? !! Market Worth: What visualize. !! If concept testing is mishandled by management, then blamed for product failure. Same as above. Multiple-product techniques can use side-by-side or staggered (sequential monadic

  3. High power target design and operation considerations for kaon production

    E-Print Network [OSTI]

    McDonald, Kirk

    High power target design and operation considerations for kaon production Philip Pile Collider · LESBIII kaon production target/issues 24/19/2013 #12;PROTON BEAM FY96 FY97 FY98/99 FY2000 FY2001 FY2002 1012 per second during spill · Production Angle: 0 degrees · Particle Flux (per 1013, 22 Ge

  4. Essays on Automotive Lending, Gasoline Prices, & Automotive Demand

    E-Print Network [OSTI]

    Schulz-Mahlendorf, Wilko Ziggy

    2013-01-01

    Gasoline PriceResponse to Chang- ing Gasoline Prices,” unpublishedShort-Run Price Elasticity of Gasoline Demand. ,” The Energy

  5. Motor gasoline assessment, Spring 1997

    SciTech Connect (OSTI)

    NONE

    1997-07-01

    The springs of 1996 and 1997 provide an excellent example of contrasting gasoline market dynamics. In spring 1996, tightening crude oil markets pushed up gasoline prices sharply, adding to the normal seasonal gasoline price increases; however, in spring 1997, crude oil markets loosened and crude oil prices fell, bringing gasoline prices down. This pattern was followed throughout the country except in California. As a result of its unique reformulated gasoline, California prices began to vary significantly from the rest of the country in 1996 and continued to exhibit distinct variations in 1997. In addition to the price contrasts between 1996 and 1997, changes occurred in the way in which gasoline markets were supplied. Low stocks, high refinery utilizations, and high imports persisted through 1996 into summer 1997, but these factors seem to have had little impact on gasoline price spreads relative to average spread.

  6. Assessment of Summer 1997 motor gasoline price increase

    SciTech Connect (OSTI)

    1998-05-01

    Gasoline markets in 1996 and 1997 provided several spectacular examples of petroleum market dynamics. The first occurred in spring 1996, when tight markets, following a long winter of high demand, resulted in rising crude oil prices just when gasoline prices exhibit their normal spring rise ahead of the summer driving season. Rising crude oil prices again pushed gasoline prices up at the end of 1996, but a warm winter and growing supplies weakened world crude oil markets, pushing down crude oil and gasoline prices during spring 1997. The 1996 and 1997 spring markets provided good examples of how crude oil prices can move gasoline prices both up and down, regardless of the state of the gasoline market in the United States. Both of these spring events were covered in prior Energy Information Administration (EIA) reports. As the summer of 1997 was coming to a close, consumers experienced yet another surge in gasoline prices. Unlike the previous increase in spring 1996, crude oil was not a factor. The late summer 1997 price increase was brought about by the supply/demand fundamentals in the gasoline markets, rather than the crude oil markets. The nature of the summer 1997 gasoline price increase raised questions regarding production and imports. Given very strong demand in July and August, the seemingly limited supply response required examination. In addition, the price increase that occurred on the West Coast during late summer exhibited behavior different than the increase east of the Rocky Mountains. Thus, the Petroleum Administration for Defense District (PADD) 5 region needed additional analysis (Appendix A). This report is a study of this late summer gasoline market and some of the important issues surrounding that event.

  7. EPA's designated products in eight categories: Construction Products

    E-Print Network [OSTI]

    Compost made from yard trimmings or food waste Garden and soaker hoses Hydraulic mulch Lawn and garden edging Plastic lumber landscaping timbers and posts Nonpaper Office Products Binders, clipboards, file waste receptacles Plastic desktop accessories Plastic envelopes Plastic trash bags Printer ribbon Toner

  8. Product Design in Enterprise Wide Optimization

    E-Print Network [OSTI]

    Grossmann, Ignacio E.

    · Flexibility · Re-usable Recyclable The magical combination = a sum much greater than the parts 6 #12;Puncture · Polymer lab/Pilot Plant/Production · Analytical labs ­ Team discussion ­ along with Alberta counterparts · Simulation tools ­ Polymers/Plus ­ process modeling ­ Predici ­ reactor modeling ­ Gap analysis of commercial

  9. EIS-0039: Motor Gasoline Deregulation and the Gasoline Tilt

    Broader source: Energy.gov [DOE]

    The Economic Regulatory Administration developed this EIS to evaluate the environmental impacts, including social and economic impacts, that may result from either of two proposed regulatory changes: (1) the exemption of motor gasoline from the Department of Energy's Mandatory Petroleum Price and Allocation Regulations, and (2) the adoption of the gasoline tilt, a proposed regulation that would allow refiners to recover an additional amount of their total increased costs on gasoline.

  10. Designing a flexible supply chain for new product launch

    E-Print Network [OSTI]

    Ha, Wei-Kwan Benjamin

    2005-01-01

    This thesis examines how companies tactically design flexible supply chains for new product launches. The research focus is on different strategies and tactics used by original equipment manufacturers to improve supply ...

  11. Multidisciplinary design problem solving on product development teams

    E-Print Network [OSTI]

    Bernstein, Joshua I. (Joshua Ian), 1974-

    2001-01-01

    This investigation, conducted under the auspices of the Lean Aerospace Initiative (LAI), studied how engineers from different specialties interpret and communicate about technical design problems while working on product ...

  12. The Komera Initiative : turning product design into public service

    E-Print Network [OSTI]

    Aust, Laura E

    2010-01-01

    Every mechanical engineering student at MIT takes the same courses: 2.009 being one of them. In our capstone product design course at MIT, most students glean an incredible amount from their teams, mentors, and projects, ...

  13. Gasoline reformulation: Part 1

    SciTech Connect (OSTI)

    NONE

    1996-06-01

    This first of a two-part article looks at the effects that gas reformulation and vehicle equipment have on emissions. Phase 1 of the AQIRP (Auto-Oil Air Quality Improvement Research Program) investigated the effect of gasoline properties and composition on emissions from pre-1990 vehicles. In the first half of phase 2, studies focused on better understanding two of the larger effects observed in Phase 1; namely, the effects of fuel sulfur and distillation properties on exhaust emissions. This testing used a fleet of 1989 vehicles. Data generated from both phases played significant roles in development of the US EPA Complex Model, and the CARB Predictive Model. These models predict vehicle emissions as a function of gasoline fuel properties, and represent major portions of reformulated gasoline regulations instituted in the US and California. Fleet-Average exhaust and hot soak evaporative mass emissions and calculated ozone-forming reactivity using the most recent Carter reactivity factors are reported for the various vehicle fleet and fuel combinations. Emissions data are also reported for subsets of the fleets including only the 4-cylinder passenger cars operating on common Fuel, C2, to assess the impact of vehicle technology effects on emissions.

  14. Adapting ADA Architectural Design Knowledge to Product Design: Groundwork for a Function Based Approach 

    E-Print Network [OSTI]

    Sangelkar, Shraddha Chandrakant

    2011-10-21

    , generate user activity and product function association rules that can be applied to the universal design of products. Proposed research activities are to identify thirty existing universal products and compare with its typical version to identify... promise in using the International Classification of Functioning, Disability and Health (ICF) lexicon to model user limitation. The actionfunction diagram provides a structured way to approach a problem in the early stage of design. The rules generated...

  15. Countries Gasoline Prices Including Taxes

    Gasoline and Diesel Fuel Update (EIA)

    Crude oil, gasoline, heating oil, diesel, propane, and other liquids including biofuels and natural gas liquids. Natural Gas Exploration and reserves, storage, imports and...

  16. Motor Gasoline Assessment, Spring 1997

    Reports and Publications (EIA)

    1997-01-01

    Analyzes the factors causing the run up of motor gasoline prices during spring 1996 and the different market conditions during spring 1997 that caused prices to decline.

  17. CREATING THE NORTHEAST GASOLINE SUPPLY RESERVE

    Broader source: Energy.gov [DOE]

    In 2012, Superstorm Sandy made landfall in the northeastern United States and caused heavy damage to two refineries and left more than 40 terminals in New York Harbor closed due to water damage and loss of power. This left some New York gas stations without fuel for as long as 30 days. As part of the Obama Administration’s ongoing response to the storm, the Department of Energy created the first federal regional refined product reserve, the Northeast Gasoline Supply Reserve.

  18. TEMPLATE DESIGN 2008 www.PosterPresentations.com

    E-Print Network [OSTI]

    Levinson, David M.

    TEMPLATE DESIGN © 2008 www.PosterPresentations.com Gasoline Prices and Traffic Safety, increased gasoline taxes are a considerable option because raised gasoline prices reduce traffic crashes directly. While higher gasoline prices due to crude oil price increases are not favored, higher gasoline

  19. Research identifies designs for lowering subsea production cost

    SciTech Connect (OSTI)

    Rothberg, R.H.; Hall, J.E. ); Douglas, L.D. ); Manuel, W.S. ); Kirkland, K.G.

    1993-03-08

    To reduce costs and simplify installation operations for subsea hardware, Amoco Production Co. in 1986 began the development of a diverless subsea production system (DSPS). At present, Amoco has completed the testing phase for selected prototype components and has completed a deepwater system design that incorporates many of these ideas. This program has yielded several configurations suitable for full-field development; however, the emphasis of the research and development program has been to identify, design, and test components of key subsystems. This first of a three-part series describes the design considerations, equipment configuration, and subsea trees.

  20. Variable-Rate State Gasoline Taxes

    E-Print Network [OSTI]

    Ang-Olson, Jeffrey; Wachs, Martin; Taylor, Brian D.

    2000-01-01

    J Bradshaw, "SLate ’F~es’ Gasoline Tax So ~t Wdl Rise," TheVarlable-Rate State Gasoline Taxers Jeffrey Ang-Olson MartinVariable-Rate State Gasoline Taxes Jeffrey Ang-Olson

  1. Variable-Rate State Gasoline Taxes

    E-Print Network [OSTI]

    Ang-Olson, Jeffrey; Wachs, Martin; Taylor, Brian D.

    1999-01-01

    Recent Changes in State Gasoline Taxation: An Analysis ofMarch The excise tax on gasoline in New York is 8.0 centsis also a sales tax on gasoline which recently stood at 7.8

  2. A short and simple explanation of how oil is converted into gasoline and then brought to

    E-Print Network [OSTI]

    A short and simple explanation of how oil is converted into gasoline and then brought to you Blending [Step 5] DiSTRibuTiON [Step 6] CONSumER uSE #12;3 SOuRCES 1 The most common method of obtaining the products produced from this petroleum, gasoline represents about half of the total product volume

  3. Market Power in California's Gasoline Market

    E-Print Network [OSTI]

    Borenstein, Severin; Bushnell, James; Lewis, Matthew

    2004-01-01

    Shares of Companies Producing Reformulated Gasoline inpossibility for a company that is in the gasoline storagegasoline producing refineries is divided among 8 companies.

  4. Northeast Gasoline Supply Reserve | Department of Energy

    Energy Savers [EERE]

    to gasoline disruptions as a result of hurricanes and other natural events. Hurricane Sandy in 2012 caused widespread issues related to the availability of gasoline. In...

  5. Gasoline Stock Charts

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming963 1.969CentralWells (MillionProved ReservesYearperDataGasoline Price

  6. The motor gasoline industry: Past, present, and future. [Contains glossary

    SciTech Connect (OSTI)

    Not Available

    1991-01-01

    Motor gasoline constitutes the largest single component of US demand for petroleum products and is the Nation's most widely used transportation fuel. Because of its importance as a transportation fuel, motor gasoline has been the focus of several regulatory and tax policy initiatives in recent years. Much of the US refining capacity is specifically geared toward maximizing motor gasoline production, and future investments by the petroleum industry in refining infrastructure are likely to be made largely to produce larger volumes of clean motor gasoline. This report addresses major events and developments that have had an impact on motor gasoline supply, distribution, prices, and demand. The report provides historical perspective as well as analyses of important events from the 1970's and 1980's. Long-term forecasts are provided for the period from 1990 to 2010 in an effort to present and analyze possible future motor gasoline trends. Other forecasts examine the near-term impact of the invasion of Kuwait. 18 figs., 10 tabs.

  7. ENHANCING MARKETING WITH ENGINEERING: OPTIMAL PRODUCT LINE DESIGN FOR HETEROGENEOUS MARKETS

    E-Print Network [OSTI]

    Papalambros, Panos

    ENHANCING MARKETING WITH ENGINEERING: OPTIMAL PRODUCT LINE DESIGN FOR HETEROGENEOUS MARKETS Jeremy of Business. #12;- 1 - ENHANCING MARKETING WITH ENGINEERING: OPTIMAL PRODUCT LINE DESIGN FOR HETEROGENEOUS MARKETS ABSTRACT Successful product line design and development often requires balancing technical

  8. Topsoe integrated gasoline synthesis (TIGAS)

    SciTech Connect (OSTI)

    Hansen, H.K.; Joensen, F.

    1987-01-01

    Integration of Haldor Topsoe's oxygenate (MeOH, DME) synthesis and the MTG process into one single synthesis loop provides a new low investment route to gasoline from natural gas. The integrated process has been demonstrated in an industrial pilot with a capacity of 1 MTPD gasoline since 1984. The pilot has operated successfully for more than 10,000 hours.

  9. Production line design and system analysis for new product introduction in electronics manufacturing

    E-Print Network [OSTI]

    Phadnis, Vrushank S. (Vrushank Shripad)

    2013-01-01

    In this research, a system level analysis was performed on a one piece flow layout design for a factory manufacturing AC motor control drives. The requirement was to create a layout for a new product while integrating ...

  10. Gasoline price volatility and the elasticity of demand for gasoline1 C.-Y. Cynthia Lina

    E-Print Network [OSTI]

    Lin, C.-Y. Cynthia

    - 1 - Gasoline price volatility and the elasticity of demand for gasoline1 C.-Y. Cynthia Lina, California Abstract We examine how gasoline price volatility impacts consumers' price elasticity of demand for gasoline. Results show that volatility in prices decreases consumer demand for gasoline in the intermediate

  11. Mu2e production solenoid cryostat conceptual design

    SciTech Connect (OSTI)

    Nicol, T.H.; Kashikhin, V.V.; Page, T.M.; Peterson, T.J.; /Fermilab

    2011-06-01

    Mu2e is a muon-to-electron conversion experiment being designed by an international collaboration of more than 65 scientists and engineers from more than 20 research institutions for installation at Fermilab. The experiment is comprised of three large superconducting solenoid magnet systems, production solenoid (PS), transport solenoid (TS) and detector solenoid (DS). A 25 kW, 8 GeV proton beam strikes a target located in the PS creating muons from the decay of secondary particles. These muons are then focused in the PS and the resultant muon beam is transported through the TS towards the DS. The production solenoid presents a unique set of design challenges as the result of high radiation doses, stringent magnetic field requirements, and large structural forces. This paper describes the conceptual design of the PS cryostat and will include discussions of the vacuum vessel, thermal shield, multi-layer insulation, cooling system, cryogenic piping, and suspension system.

  12. A design tool architecture for the rapid evaluation of product design tradeoffs in an Inernet-based system modeling environment

    E-Print Network [OSTI]

    Wronski, Jacob (Jacob Andrzej)

    2005-01-01

    This thesis presents a computer-aided design tool for the rapid evaluation of design tradeoffs in an integrated product modeling environment. The goal of this work is to provide product development organizations with better ...

  13. Asymmetric and nonlinear pass-through of crude oil prices to gasoline and natural gas prices

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Asymmetric and nonlinear pass-through of crude oil prices to gasoline and natural gas prices Ahmed distributed lags (NARDL) mod- el to examine the pass-through of crude oil prices into gasoline and natural gas-through of crude oil prices to the prices of refined petroleum products and other commodities. Most of them make

  14. Gasoline price spikes and regional gasoline context regulations : a structural approach

    E-Print Network [OSTI]

    Muehlegger, Erich J.

    2004-01-01

    Since 1999, gasoline prices in California, Illinois and Wisconsin have spiked occasionally well above gasoline prices in nearby states. In May and June 2000, for example, gasoline prices in Chicago rose twenty eight cents ...

  15. Conceptual designs for commercial OTEC-ammonia product plantships

    SciTech Connect (OSTI)

    Richards, D.; Dugger, G.L.; Francis, E.J.

    1980-12-01

    The U.S. Department of Energy program plan for OTEC calls for design of pilot/demonstration plantships leading to commercial development for energy intensive product options as well as OTEC facilities for direct delivery of electric power to shore via undersea cables. The Applied Physics Laboratory (APL) has investigated alternative product options and their relative commercial viabilities since 1975, and has studied and developed proposed designs for OTEC plantships to produce significant amounts of energy products from the ocean in a reliable, environmentally acceptable, and cost effective manner, including resolution of some of the critical engineering design items through analysis and tests. This paper discusses some of this earlier work in its relation to the conceptual commercial plantship designs presented and describes the OTEC power systems and ammonia plant process requirements, including integration-operational aspects. Estimated OTEC power capacities and energy flow usage prospects are presented. Specific plantship layouts are discussed including construction and deployment, and projected costs versus market potentials are summarized.

  16. Switchable photosystem-II designer algae for photobiological hydrogen production

    DOE Patents [OSTI]

    Lee, James Weifu (Knoxville, TN)

    2010-01-05

    A switchable photosystem-II designer algae for photobiological hydrogen production. The designer transgenic algae includes at least two transgenes for enhanced photobiological H.sub.2 production wherein a first transgene serves as a genetic switch that can controls photosystem II (PSII) oxygen evolution and a second transgene encodes for creation of free proton channels in the algal photosynthetic membrane. In one embodiment, the algae includes a DNA construct having polymerase chain reaction forward primer (302), a inducible promoter (304), a PSII-iRNA sequence (306), a terminator (308), and a PCR reverse primer (310). In other embodiments, the PSII-iRNA sequence (306) is replaced with a CF.sub.1-iRNA sequence (312), a streptomycin-production gene (314), a targeting sequence (316) followed by a proton-channel producing gene (318), or a PSII-producing gene (320). In one embodiment, a photo-bioreactor and gas-product separation and utilization system produce photobiological H.sub.2 from the switchable PSII designer alga.

  17. Effects of Vehicle Image in Gasoline-Hybrid Electric Vehicles

    E-Print Network [OSTI]

    Heffner, Reid R.; Kurani, Ken; Turrentine, Tom

    2005-01-01

    of Vehicle Image in Gasoline-Hybrid Electric Vehicles Reidof Vehicle Image in Gasoline-Hybrid Electric Vehicles Reidhigh demand for gasoline-hybrid electric vehicles (HEVs)?

  18. Comparing air quality impacts of hydrogen and gasoline

    E-Print Network [OSTI]

    Sperling, Dan; Wang, Guihua; Ogden, Joan M.

    2008-01-01

    of hydrogen, methanol and gasoline as fuels for fuel cellto petroleum pathways with gasoline and diesel vehicles.simplicity, we use the term ‘‘gasoline pathway” to refer to

  19. Demand and Price Uncertainty: Rational Habits in International Gasoline Demand

    E-Print Network [OSTI]

    Scott, K. Rebecca

    2013-01-01

    Sterner. 1991. Analysing gasoline demand elasticities: A2011. Measuring global gasoline and diesel price and incomeMutairi. 1995. Demand for gasoline in Kuwait: An empirical

  20. Path to High Efficiency Gasoline Engine | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Path to High Efficiency Gasoline Engine Path to High Efficiency Gasoline Engine Path to High Efficiency Gasoline Engine deer10johansson.pdf More Documents & Publications Partially...

  1. Carbonyl Emissions from Gasoline and Diesel Motor Vehicles

    E-Print Network [OSTI]

    Jakober, Chris A.

    2008-01-01

    fraction of light-duty gasoline vehicle particulate matterQuinone emissions from gasoline and diesel motor vehicles.32 organic compounds from gasoline- powered motor vehicles.

  2. Edgeworth Price Cycles: Evidence from the Toronto Retail Gasoline Market

    E-Print Network [OSTI]

    Noel, Michael

    2004-01-01

    Robbery, An Analysis of the Gasoline Crisis”, Bloomington:Dynamic Pricing in Retail gasoline Markets”, RAND Journal ofR. Gilbert. “Do Gasoline Markets Respond Asymmetrically to

  3. Revisiting the Income Effect: Gasoline Prices and Grocery Purchases

    E-Print Network [OSTI]

    Gicheva, Dora; Hastings, Justine; Villas-Boas, Sofia B

    2008-01-01

    University. Espey, M. , 1998. "Gasoline Demand Revisited: AnRun Price Elasticity of Gasoline Demand,” working paper.Elasticities of Demand for Gasoline in Canada and the United

  4. Retail Policies and Competition in the Gasoline Industry

    E-Print Network [OSTI]

    Borenstein, Severin; Bushnell, Jim

    2005-01-01

    California Gasoline Stations Major Company Operated NumberCalifornia Gasoline Stations Major Company Operated Numberpercentage of gasoline sold from company-operated stations

  5. Enhancing marketing with engineering: Optimal product line design for heterogeneous markets

    E-Print Network [OSTI]

    Papalambros, Panos

    Enhancing marketing with engineering: Optimal product line design for heterogeneous markets Jeremy design and development often require a balance of technical and market tradeoffs. Quantitative methods: John H. Roberts Keywords: Product line design Heterogeneity Decomposition Analytical target cascading

  6. Increasing Gas Prices: Good Economics, but Bad Public Relations Rising gasoline prices captured the attention of the press and politicians in recent months,

    E-Print Network [OSTI]

    Ahmad, Sajjad

    Increasing Gas Prices: Good Economics, but Bad Public Relations Rising gasoline prices captured interest during our current gasoline shortage. That is, a higher price rations the product to the best use for temporarily foregoing the state gasoline tax. Will that lower gas prices? No. Gas prices rose not because

  7. Invitation to our Design Trade Show Managing New Product Design: Design Theory and Methods

    E-Print Network [OSTI]

    Agogino, Alice M.

    ­ For those design researchers seeking collaboration, we provide a platform to generate that is activated by changes in car speed. 7. Ergonomic Laptop Case ­ A laptop case

  8. Costs Models in Design and Manufacturing of Sand Casting Products

    E-Print Network [OSTI]

    Perry, Nicolas; Bernard, Alain

    2010-01-01

    In the early phases of the product life cycle, the costs controls became a major decision tool in the competitiveness of the companies due to the world competition. After defining the problems related to this control difficulties, we will present an approach using a concept of cost entity related to the design and realization activities of the product. We will try to apply this approach to the fields of the sand casting foundry. This work will highlight the enterprise modelling difficulties (limits of a global cost modelling) and some specifics limitations of the tool used for this development. Finally we will discuss on the limits of a generic approach.

  9. Costs Models in Design and Manufacturing of Sand Casting Products

    E-Print Network [OSTI]

    Nicolas Perry; Magali Mauchand; Alain Bernard

    2010-11-26

    In the early phases of the product life cycle, the costs controls became a major decision tool in the competitiveness of the companies due to the world competition. After defining the problems related to this control difficulties, we will present an approach using a concept of cost entity related to the design and realization activities of the product. We will try to apply this approach to the fields of the sand casting foundry. This work will highlight the enterprise modelling difficulties (limits of a global cost modelling) and some specifics limitations of the tool used for this development. Finally we will discuss on the limits of a generic approach.

  10. The Performance of Gasoline Fuels and Surrogates in Gasoline HCCI Combustion

    Broader source: Energy.gov [DOE]

    Almost 2 dozen gasoline fuels, blending components, and surrogates were evaluated in a single-cylinder HCCI gasoline engine for combustion, emissions, and efficiency performance.

  11. Oxy-gasoline torch. Innovative technology summary report

    SciTech Connect (OSTI)

    1998-12-01

    Under the deactivation and decommissioning (D and D) Implementation Plan of the US Department of Energy`s (DOE) Fernald Environmental Management Project (FEMP), non-recyclable process components and debris that are removed from buildings undergoing D and D are disposed of in an on-site disposal facility (OSDF). Critical to the design and operation of the FEMP`s OSDF are provisions to protect against subsidence of the OSDF`s cap. Subsidence of the cap could occur if void spaces within the OSDF were to collapse under the overburden of debris and the OSDF cap. Subsidence may create significant depressions in the OSDF`s cap in which rainwater could collect and eventually seep into the OSDF. To minimize voids in the FEMP`s OSDF, large metallic components are cut into smaller segments that can be arranged more compactly when placed in the OSDF. Component segmentation using an oxy-acetylene cutting torch was the baseline approach used by the FEMP`s D and D contractor on Plant 1, Babcock and Wilcox (B and W) Services, Inc., for the dismantlement and size-reduction of large metal components. Although this technology has performed satisfactorily, improvements are sought in the areas of productivity, airborne contamination, safety, and cost. This demonstration investigated the feasibility of using an oxy-gasoline torch as an alternative to the baseline oxy-acetylene torch for segmenting D and D components. This report provides a comparative analysis of the cost and performance of the baseline oxy-acetylene torch currently used by B and W Services, Inc., and the innovative oxy-gasoline torch.

  12. Nottingham Trent University, PhD Studentship Opportunities in Product Design, October 2014 Theme/Project

    E-Print Network [OSTI]

    Evans, Paul

    , the treatment of facial palsy and the development of new additive manufacturing techniques for medical devices product design. The research will be carried out at the Advanced Design and Manufacturing engineering of materials, pre-manufacture (product design specification, conceptual design, embodiment design and detail

  13. Household gasoline demand in the United States

    E-Print Network [OSTI]

    Schmalensee, Richard

    1995-01-01

    Continuing rapid growth in U.S. gasoline consumption threatens to exacerbate environmental and congestion problems. We use flexible semiparametric and nonparametric methods to guide analysis of household gasoline consumption, ...

  14. Price Changes in the Gasoline Market - Are Midwestern Gasoline Prices Downward Sticky?

    Reports and Publications (EIA)

    1999-01-01

    The report concentrates on regional gasoline prices in the Midwest from October 1992 through June 1998.

  15. Product-Process Development Simulation to Support Specialty Contractor Involvement in Early Design

    E-Print Network [OSTI]

    Tommelein, Iris D.

    design of architecture-engineering-construction (AEC) products. Lean construction theory advocates such involvement. The practice of involving suppliers in product development and in manufacturing has proven

  16. Advanced Gasoline Turbocharged Direct Injection (GTDI) Engine...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Vehicle Technologies Office Merit Review 2015: Advanced Gasoline Turbocharged Direct Injection (GTDI) Engine Development Vehicle Technologies Office Merit Review 2014:...

  17. Short-Term Energy Outlook Model Documentation: Motor Gasoline Consumption Model

    Reports and Publications (EIA)

    2011-01-01

    The motor gasoline consumption module of the Short-Term Energy Outlook (STEO) model is designed to provide forecasts of total U.S. consumption of motor gasolien based on estimates of vehicle miles traveled and average vehicle fuel economy.

  18. Advanced Turbine Systems (ATS) program conceptual design and product development

    SciTech Connect (OSTI)

    1996-08-31

    Achieving the Advanced Turbine Systems (ATS) goals of 60% efficiency, single-digit NO{sub x}, and 10% electric power cost reduction imposes competing characteristics on the gas turbine system. Two basic technical issues arise from this. The turbine inlet temperature of the gas turbine must increase to achieve both efficiency and cost goals. However, higher temperatures move in the direction of increased NO{sub x} emission. Improved coatings and materials technologies along with creative combustor design can result in solutions to achieve the ultimate goal. GE`s view of the market, in conjunction with the industrial and utility objectives, requires the development of Advanced Gas Turbine Systems which encompass two potential products: a new aeroderivative combined-cycle system for the industrial market, and a combined-cycle system for the utility sector that is based on an advanced frame machine. The GE Advanced Gas Turbine Development program is focused on two specific products: (1) a 70 MW class industrial gas turbine based on the GE90 core technology utilizing an innovative air cooling methodology; (2) a 200 MW class utility gas turbine based on an advanced Ge heavy-duty machine utilizing advanced cooling and enhancement in component efficiency. Both of these activities required the identification and resolution of technical issues critical to achieving ATS goals. The emphasis for the industrial ATS was placed upon innovative cycle design and low emission combustion. The emphasis for the utility ATS was placed on developing a technology base for advanced turbine cooling, while utilizing demonstrated and planned improvements in low emission combustion. Significant overlap in the development programs will allow common technologies to be applied to both products. GE Power Systems is solely responsible for offering GE products for the industrial and utility markets.

  19. Method for producing gasoline-alcohol fuels

    SciTech Connect (OSTI)

    Black, C.

    1983-05-10

    A process for producing gasoline-ethanol blends comprises purifying dilute ethanol by extractive distillation and concentrating the ethanol by distillation followed by one or both of the following steps: (A) liquid extraction of ethanol into heated gasoline or (B) azeotropic distillation of ethanol with an entrainer followed by blending with gasoline.

  20. Motor Gasoline Outlook and State MTBE Bans

    Reports and Publications (EIA)

    2003-01-01

    The U.S. is beginning the summer 2003 driving season with lower gasoline inventories and higher prices than last year. Recovery from this tight gasoline market could be made more difficult by impending state bans on the blending of methyl tertiary butyl ether (MTBE) into gasoline that are scheduled to begin later this year.

  1. A decomposition-based approach for the integration of product development and manufacturing system design

    E-Print Network [OSTI]

    Kim, Yong-Suk, 1975-

    2002-01-01

    Using a structured approach to understand the interaction between product design decisions and manufacturing system design is critical to reflect manufacturing system issues early in the product development process. Early ...

  2. Functional design of mechanical products based on behavior-driven function-environment-structure modeling framework

    E-Print Network [OSTI]

    Zhang, W.Y.

    The relative significance of upstream design activity to downstream design activity is widely recognized, due to its critical role in determining the final product’s functionality. Although there are now some general ...

  3. TEMPLATE DESIGN 2008 www.PosterPresentations.com

    E-Print Network [OSTI]

    Levinson, David M.

    TEMPLATE DESIGN © 2008 www.PosterPresentations.com Gasoline Prices and Their Relationship to Drunk-Kwapisz, 2006), but drunk-driving crashes may also be affected by gasoline price changes. Gasoline prices are found to affect automobile crashes negatively in general­­higher gasoline prices lead to fewer traffic

  4. Design and Testing of a Labview- Controlled Catalytic Packed- Bed Reactor System For Production of Hydrocarbon Fuels

    SciTech Connect (OSTI)

    Street, J.; Yu, F.; Warnock, J.; Wooten, J.; Columbus, E.; White, M. G.

    2012-05-01

    Gasified woody biomass (producer gas) was converted over a Mo/H+ZSM-5 catalyst to produce gasolinerange hydrocarbons. The effect of contaminants in the producer gas showed that key retardants in the system included ammonia and oxygen. The production of gasoline-range hydrocarbons derived from producer gas was studied and compared with gasoline-range hydrocarbon production from two control syngas mixes. Certain mole ratios of syngas mixes were introduced into the system to evaluate whether or not the heat created from the exothermic reaction could be properly controlled. Contaminant-free syngas was used to determine hydrocarbon production with similar mole values of the producer gas from the gasifier. Contaminant-free syngas was also used to test an ideal contaminant-free synthesis gas situation to mimic our particular downdraft gasifier. Producer gas was used in this study to determine the feasibility of using producer gas to create gasoline-range hydrocarbons on an industrial scale using a specific Mo/H+ZSM-5 catalyst. It was determined that after removing the ammonia, other contaminants poisoned the catalyst and retarded the hydrocarbon production process as well.

  5. Expected Productivity-Based Risk Analysis in Conceptual Design: With Application to the

    E-Print Network [OSTI]

    Expected Productivity-Based Risk Analysis in Conceptual Design: With Application to the Terrestrial;Expected Productivity-Based Risk Analysis in Conceptual Design: With Application to the Terrestrial Planet;3 Expected Productivity-Based Risk Analysis in Conceptual Design: With Application to the Terrestrial Planet

  6. MULTI-PERIOD CAPACITY PLANNING FOR INTEGRATED PRODUCT-PROCESS DESIGN

    E-Print Network [OSTI]

    Saitou, Kazuhiro "Kazu"

    MULTI-PERIOD CAPACITY PLANNING FOR INTEGRATED PRODUCT-PROCESS DESIGN Emre Kazancioglu Department-process design, robust design, capacity plan- ning, discrete event simulation, Monte Carlo simula- tion, multi increas- ing product quality by investing on higher quality machinery drives the price of the product up

  7. M-C Power`s product design and improvement

    SciTech Connect (OSTI)

    Scroppo, J.A.; Laurens, R.M.; Petraglia, V.J.

    1995-12-31

    The sole mission of M-C Power is the development and subsequent commercialization of molten carbonate fuel cell (MCFC) stacks. These MCFC stacks are based on the Internally Manifolded Heat EXchanger plate design developed by the Institute of Gas Technology. Integration of the MCFC stack into a commercially viable power plant is the mission of the IMHEX{sup {reg_sign}} team. The team is composed of leaders in the packaging and design of power generation equipment, including fuel cell technology, and includes Stewart & Stevenson, Bechtel, The Institute of Gas Technology and M-C Power. In an effort to succeed in their respective missions, M-C Power and the IMHEX{sup {reg_sign}} team have developed a commercialization program. At the present time, the team is making the transition from Phase I (Technology Development) to Phase II (Product Design & Improvement) of the program. Phase II`s objective is a commercially viable (cost effective and technologically reliable) MCFC power plant ready for market by the turn of the century.

  8. Clearing the Air? The Effects of Gasoline Content Regulation on Air Quality

    E-Print Network [OSTI]

    Auffhammer, Maximilian; Kellogg, Ryan

    2009-01-01

    Reformulating Competition? Gasoline Content Regulationand Wholesale Gasoline Prices,” Journal of Environmentaland Heterogeneity in U.S. Gasoline Prices,” Journal of

  9. The Construction of Preference in Engineering Design and Implications for Green Products

    E-Print Network [OSTI]

    Papalambros, Panos

    ABSTRACT The Construction of Preference in Engineering Design and Implications for Green to designers; and that only some people have inconsistent preference for green products. (2 This dissertation incorporates the construction of preference into engineering design methodology

  10. Distributed & conceptual CAD (DC-CAD) : a new software solution for product design

    E-Print Network [OSTI]

    Egan, Mark D. (Mark Douglas), 1985-

    2007-01-01

    Many computer aided design (CAD) software packages focus on detailed design and not on early stage, conceptual design. The ability to conceptualize and sketch early versions of a product solution is currently limited to ...

  11. Risk Management in Product Design: Current State, Conceptual Model and Future Research

    E-Print Network [OSTI]

    Oehmen, Josef

    Risk management is an important element of product design. It helps to minimize the project- and product-related risks such as project budget and schedule overrun, or missing product cost and quality targets. Risk management ...

  12. A Continuous Solar Thermochemical Hydrogen Production Plant Design

    E-Print Network [OSTI]

    Luc, Wesley Wai

    C.E. , Richardson, D.M. , “Hydrogen Production from Water byThermochemical Hydrogen Production: Past and Present,”Muradove, N. , “Hydrogen Production via Solar Thermochemical

  13. Deepwater production drives design of new Gulf gas plant

    SciTech Connect (OSTI)

    Nielsen, R.A. [Amoco Corp., Houston, TX (United States); Petty, L.; Elliot, D.; Chen, R. [International Process Services Inc., Houston, TX (United States)

    1998-03-16

    Exploration and production success in deepwater, eastern Gulf of Mexico has created the need for additional gas-transmission and processing infrastructure. The Destin pipeline and the Pascagoula gas-processing plant are being built to serve this need. The Destin pipeline originates at a junction platform at Main Pass 260 and, after coming ashore near Pascagoula, Miss., will connect with five interstate gas-transmission pipelines, by-passing gas-transportation bottlenecks in Louisiana and Alabama. The Pascagoula plant will be built near the point the pipeline comes ashore and immediately before the first compressor station. The paper discusses handling condensate, design goals, achieving objectives, low life-cycle cost, and project schedule.

  14. Reformulated Gasoline Complex Model

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a.CORPORATION

  15. A Continuous Solar Thermochemical Hydrogen Production Plant Design

    E-Print Network [OSTI]

    Luc, Wesley Wai

    in order to meet design criteria. A total of 11 designproduct stream. The design criterion of this block wasin stream K2SO4SO3. The design criterion of this block was

  16. Process for conversion of lignin to reformulated, partially oxygenated gasoline

    DOE Patents [OSTI]

    Shabtai, Joseph S. (Salt Lake City, UT); Zmierczak, Wlodzimierz W. (Salt Lake City, UT); Chornet, Esteban (Golden, CO)

    2001-01-09

    A high-yield process for converting lignin into reformulated, partially oxygenated gasoline compositions of high quality is provided. The process is a two-stage catalytic reaction process that produces a reformulated, partially oxygenated gasoline product with a controlled amount of aromatics. In the first stage of the process, a lignin feed material is subjected to a base-catalyzed depolymerization reaction, followed by a selective hydrocracking reaction which utilizes a superacid catalyst to produce a high oxygen-content depolymerized lignin product mainly composed of alkylated phenols, alkylated alkoxyphenols, and alkylbenzenes. In the second stage of the process, the depolymerized lignin product is subjected to an exhaustive etherification reaction, optionally followed by a partial ring hydrogenation reaction, to produce a reformulated, partially oxygenated/etherified gasoline product, which includes a mixture of substituted phenyl/methyl ethers, cycloalkyl methyl ethers, C.sub.7 -C.sub.10 alkylbenzenes, C.sub.6 -C.sub.10 branched and multibranched paraffins, and alkylated and polyalkylated cycloalkanes.

  17. Essays on gasoline price spikes, environmental regulation of gasoline content, and incentives for refinery operation

    E-Print Network [OSTI]

    Muehlegger, Erich J

    2005-01-01

    Since 1999, regional retail and wholesale gasoline markets in the United States have experienced significant price volatility, both intertemporally and across geographic markets. In particular, gasoline prices in California, ...

  18. Expert Feature: Designing Better Products by Coordinating Marketing Research and Engineering

    E-Print Network [OSTI]

    Michalek, Jeremy J.

    Expert Feature: Designing Better Products by Coordinating Marketing Research and Engineering Jeremy to be responsible for the design, manufacturing and marketing of a new product. As industries and markets have grown, the scale, scope and complexity of these tasks has led to a division of labor: Marketing, design

  19. A Market-Driven Approach to the Design of Platform-Based Product Families

    E-Print Network [OSTI]

    Chen, Wei

    A Market-Driven Approach to the Design of Platform-Based Product Families Deepak Kumar* and Wei existing design methods integrate market considerations (e.g., customer preferences, competition variant in the family. The novel Market-Driven Product Family Design (MPFD) methodology proposed here

  20. Conceptual design report -- Gasification Product Improvement Facility (GPIF)

    SciTech Connect (OSTI)

    Sadowski, R.S.; Skinner, W.H.; House, L.S.; Duck, R.R. [CRS Sirrine Engineers, Inc., Greenville, SC (United States); Lisauskas, R.A.; Dixit, V.J. [Riley Stoker Corp., Worcester, MA (United States); Morgan, M.E.; Johnson, S.A. [PSI Technology Co., Andover, MA (United States). PowerServe Div.; Boni, A.A. [PSI-Environmental Instruments Corp., Andover, MA (United States)

    1994-09-01

    The problems heretofore with coal gasification and IGCC concepts have been their high cost and historical poor performance of fixed-bed gasifiers, particularly on caking coals. The Gasification Product Improvement Facility (GPIF) project is being developed to solve these problems through the development of a novel coal gasification invention which incorporates pyrolysis (carbonization) with gasification (fixed-bed). It employs a pyrolyzer (carbonizer) to avoid sticky coal agglomeration caused in the conventional process of gradually heating coal through the 400 F to 900 F range. In so doing, the coal is rapidly heated sufficiently such that the coal tar exists in gaseous form rather than as a liquid. Gaseous tars are then thermally cracked prior to the completion of the gasification process. During the subsequent endothermic gasification reactions, volatilized alkali can become chemically bound to aluminosilicates in (or added to) the ash. To reduce NH{sub 3} and HCN from fuel born nitrogen, steam injection is minimized, and residual nitrogen compounds are partially chemically reduced in the cracking stage in the upper gasifier region. Assuming testing confirms successful deployment of all these integrated processes, future IGCC applications will be much simplified, require significantly less mechanical components, and will likely achieve the $1,000/kWe commercialized system cost goal of the GPIF project. This report describes the process and its operation, design of the plant and equipment, site requirements, and the cost and schedule. 23 refs., 45 figs., 23 tabs.

  1. Gasoline Vehicle Exhuast Particle Sampling Study | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Vehicle Exhuast Particle Sampling Study Gasoline Vehicle Exhuast Particle Sampling Study 2003 DEER Conference Presentation: University of Minnesota 2003deerkittelson.pdf More...

  2. Blender Net Production of Finished Motor Gasoline

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1 Table 1.101 (Million Short6RU Ntight oil

  3. Clean gasoline via VRDS/RFCC

    SciTech Connect (OSTI)

    Reynolds, B.E. (Chevron Research and Technology Co., Richmond, CA (US)); Brown, E.C.; Silverman, M.A. (Stone and Webster Engineering Corp., Houston, TX (US))

    1992-04-01

    The need to convert the bottom of the barrel into clean transportation fuels continues to gain importance as crudes become heavier and demand shifts away from heavy, high-sulfur fuel oil products. Increasingly, the emphasis is on processes that can completely convert the residue to lighter products. This paper reports that thermal processes, such as coking-based technologies, suffer from the disadvantages of producing a large amount of low value byproduct (coke or low Btu gas) and require extensive further processing of product liquids. The combination of residuum hydrotreating or hydrodesulfurization (RDS) and residuum fluid catalytic cracking (RFCC) has gained wide acceptance due to the direct production of gasoline with only small amounts of low value byproducts. Moreover, the increasingly severe government regulations on diesel fuel quality together with a growth in demands suggests a combination of vacuum gas oil hydrocracking (VGO HDC), vacuum residuum hydrotreating (VRDS) and RFCC. A joint study by Chevron Research and Technology Co. and Stone and Webster Engineering Corp. (S and W) has shown that vacuum residuum (VR) can be economically upgraded using Chevron's VRDS process into feedstock for the S and W FCC process, even if all of the VGO is processed separately by hydrocracking.

  4. Biomass to Gasoline and DIesel Using Integrated Hydropyrolysis and Hydroconversion

    SciTech Connect (OSTI)

    Marker, Terry; Roberts, Michael; Linck, Martin; Felix, Larry; Ortiz-Toral, Pedro; Wangerow, Jim; Tan, Eric; Gephart, John; Shonnard, David

    2013-01-02

    Cellulosic and woody biomass can be directly converted to hydrocarbon gasoline and diesel blending components through the use of integrated hydropyrolysis plus hydroconversion (IH2). The IH2 gasoline and diesel blending components are fully compatible with petroleum based gasoline and diesel, contain less than 1% oxygen and have less than 1 total acid number (TAN). The IH2 gasoline is high quality and very close to a drop in fuel. The DOE funding enabled rapid development of the IH2 technology from initial proof-of-principle experiments through continuous testing in a 50 kg/day pilot plant. As part of this project, engineering work on IH2 has also been completed to design a 1 ton/day demonstration unit and a commercial-scale 2000 ton/day IH2 unit. These studies show when using IH2 technology, biomass can be converted directly to transportation quality fuel blending components for the same capital cost required for pyrolysis alone, and a fraction of the cost of pyrolysis plus upgrading of pyrolysis oil. Technoeconomic work for IH2 and lifecycle analysis (LCA) work has also been completed as part of this DOE study and shows IH2 technology can convert biomass to gasoline and diesel blending components for less than $2.00/gallon with greater than 90% reduction in greenhouse gas emissions. As a result of the work completed in this DOE project, a joint development agreement was reached with CRI Catalyst Company to license the IH2 technology. Further larger-scale, continuous testing of IH2 will be required to fully demonstrate the technology, and funding for this is recommended. The IH2 biomass conversion technology would reduce U.S. dependence on foreign oil, reduce the price of transportation fuels, and significantly lower greenhouse gas (GHG) emissions. It is a breakthrough for the widespread conversion of biomass to transportation fuels.

  5. Demand and Price Volatility: Rational Habits in International Gasoline Demand

    E-Print Network [OSTI]

    Scott, K. Rebecca

    2011-01-01

    H. , and James M. Gri˘ n. 1983. Gasoline demand in the OECDof dynamic demand for gasoline. Journal of Econometrics 77(An empirical analysis of gasoline demand in Denmark using

  6. Retail Policies and Competition in the Gasoline Industry

    E-Print Network [OSTI]

    Borenstein, Severin; Bushnell, Jim

    2005-01-01

    Total Volume Table 4 - Gasoline Price Components Year RetailEvidence from Retail Gasoline Markets." Journal of Law,and Competition in the Gasoline Industry I. II. III. IV. V.

  7. An Experimental Investigation of Low Octane Gasoline in Diesel...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Low Octane Gasoline in Diesel Engines An Experimental Investigation of Low Octane Gasoline in Diesel Engines Presentation given at the 16th Directions in Engine-Efficiency and...

  8. Volatility of Gasoline and Diesel Fuel Blends for Supercritical...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Gasoline and Diesel Fuel Blends for Supercritical Fuel Injection Volatility of Gasoline and Diesel Fuel Blends for Supercritical Fuel Injection Supercritical dieseline could be...

  9. In Vitro Genotoxicity of Gasoline and Diesel Engine Vehicle Exhaust...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Gasoline and Diesel Engine Vehicle Exhaust Particulate and Semi-Volatile Organic Compound Materials In Vitro Genotoxicity of Gasoline and Diesel Engine Vehicle Exhaust Particulate...

  10. Characterization of Pre-Commercial Gasoline Engine Particulates...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Pre-Commercial Gasoline Engine Particulates Through Advanced Aerosol Methods Characterization of Pre-Commercial Gasoline Engine Particulates Through Advanced Aerosol Methods...

  11. Diesel and Gasoline Engine Emissions: Characterization of Atmosphere...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Gasoline Engine Emissions: Characterization of Atmosphere Composition and Health Responses to Inhaled Emissions Diesel and Gasoline Engine Emissions: Characterization of...

  12. Load Expansion with Diesel/Gasoline RCCI for Improved Engine...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    with DieselGasoline RCCI for Improved Engine Efficiency and Emissions Load Expansion with DieselGasoline RCCI for Improved Engine Efficiency and Emissions This poster will...

  13. Revisiting the Income Effect: Gasoline Prices and Grocery Purchases

    E-Print Network [OSTI]

    Gicheva, Dora; Hastings, Justine; Villas-Boas, Sofia B

    2008-01-01

    Mortgage or Rent Gasoline and Motor Oil Income after taxesMortgage or Rent Gasoline and Motor Oil Income after taxes

  14. Revisiting the Income Effect: Gasoline Prices and Grocery Purchases

    E-Print Network [OSTI]

    Gicheva, Dora; Hastings, Justine; Villas-Boas, Sofia B

    2008-01-01

    Formulations Gasoline and Crude Oil Prices, 2000-2006 FigureI: Weekly Gasoline and Crude Oil Prices for2001- 2006 Crude Oil CA Regular Reformulated Figure II:

  15. Lean Gasoline System Development for Fuel Efficient Small Car...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Lean Gasoline System Development for Fuel Efficient Small Car Lean Gasoline System Development for Fuel Efficient Small Car Vehicle Technologies...

  16. Oxidation characteristics of gasoline direct-injection (GDI)...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    characteristics of gasoline direct-injection (GDI) engine soot: Catalytic effects of ash and modified kinetic correlation Title Oxidation characteristics of gasoline...

  17. Reductant Chemistry during LNT Regeneration for a Lean Gasoline...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Chemistry during LNT Regeneration for a Lean Gasoline Engine Reductant Chemistry during LNT Regeneration for a Lean Gasoline Engine Poster presented at the 16th Directions in...

  18. Fact #890: September 14, 2015 Gasoline Prices Are Affected by...

    Energy Savers [EERE]

    90: September 14, 2015 Gasoline Prices Are Affected by Changes in Refinery Output - Dataset Fact 890: September 14, 2015 Gasoline Prices Are Affected by Changes in Refinery Output...

  19. Advantages of Oxygenates Fuels over Gasoline in Direct Injection...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advantages of Oxygenates Fuels over Gasoline in Direct Injection Spark Ignition Engines Advantages of Oxygenates Fuels over Gasoline in Direct Injection Spark Ignition Engines...

  20. Fact #869: April 20, 2015 Gasoline Direct Injection Captures...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    9: April 20, 2015 Gasoline Direct Injection Captures 38% Market Share in Just Seven Years from First Significant Use Fact 869: April 20, 2015 Gasoline Direct Injection Captures...

  1. Dispensing Equipment Testing With Mid-Level Ethanol/Gasoline...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Dispensing Equipment Testing With Mid-Level EthanolGasoline Test Fluid Dispensing Equipment Testing With Mid-Level EthanolGasoline Test Fluid The National Renewable Energy...

  2. Impact of Ethanol Blending on U.S. Gasoline Prices

    SciTech Connect (OSTI)

    Not Available

    2008-11-01

    This study assesses the impact of ethanol blending on gasoline prices in the US today and the potential impact of ethanol on gasoline prices at higher blending concentrations.

  3. Gasoline prices decrease (Short version)

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry Natural GasNatural GasEIA lowerslong version) GasolineShort version)

  4. Gasoline prices decrease (long version)

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry Natural GasNatural GasEIA lowerslong version) GasolineShort

  5. Gasoline prices decrease (long version)

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry Natural GasNatural GasEIA lowerslong version) GasolineShort5, 2014

  6. Gasoline prices decrease (long version)

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry Natural GasNatural GasEIA lowerslong version) GasolineShort5,

  7. Gasoline prices decrease (long version)

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry Natural GasNatural GasEIA lowerslong version) GasolineShort5,long

  8. Gasoline prices decrease (short version)

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry Natural GasNatural GasEIA lowerslong version)Gasoline prices

  9. Gasoline prices decrease (short version)

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry Natural GasNatural GasEIA lowerslong version)Gasoline pricesshort

  10. Photobiological hydrogen production with switchable photosystem-II designer algae

    DOE Patents [OSTI]

    Lee, James Weifu

    2014-02-18

    A process for enhanced photobiological H.sub.2 production using transgenic alga. The process includes inducing exogenous genes in a transgenic alga by manipulating selected environmental factors. In one embodiment inducing production of an exogenous gene uncouples H.sub.2 production from existing mechanisms that would downregulate H.sub.2 production in the absence of the exogenous gene. In other embodiments inducing an exogenous gene triggers a cascade of metabolic changes that increase H.sub.2 production. In some embodiments the transgenic alga are rendered non-regenerative by inducing exogenous transgenes for proton channel polypeptides that are targeted to specific algal membranes.

  11. The impact of software design structure on product maintenance costs and measurement of economic benefits of product redesign

    E-Print Network [OSTI]

    Akaikine, Andrei

    2010-01-01

    This paper reports results of an empirical study that aimed to demonstrate the link between software product design structure and engineers' effort to perform a code modification in the context of a corrective maintenance ...

  12. Project Information Form Project Title Designing and Analyzing Policies for Renewable Fuels

    E-Print Network [OSTI]

    California at Davis, University of

    Project Information Form Project Title Designing and Analyzing Policies for Renewable Fuels the utilization of clean, renewable fuel sources in the production of finished motor gasoline. Many are the renewable fuel standard (RFS) at the national level and California's Low Carbon Fuels Standard (LCFS). Both

  13. Gasoline Biodesulfurization DE-FC07-97ID13570 FINAL REPORT

    SciTech Connect (OSTI)

    Pienkos, Philip T.

    2002-01-15

    Nine strains were identified to grow with gasoline as sole sulfur source. Two different genes were cloned from Gordonia terrae KGB1 and tested for the ability to support gasoline BDS. The first of these, fmoA, was cloned by screening a KGB1 gene library for the ability to convert indole to indigo (a sulfur-regulated capability in KGB1). The fmoA gene was overexpressed in a gasoline tolerant strain of Pseudomonas putida PpG1 and the recombinant strain was shown to convert thiophene to a dimer of thiophene sulfoxide at rates nearly two orders of magnitude higher than KGB1 could catalyze the reaction. Despite this high activity the recombinant PpG1 was unable to demonstrate any activity against gasoline either in shake flask or in bench-scale gasoline BDS bioreactor. A second gene (toeA) was cloned from KGB1 and shown to support growth of Rhodococcus erythropolis JB55 on gasoline. The toeA gene was also identified in another gasoline strain T. wratislaviensis EMT4, and was identified as a homolog of dszA from R. erythropolis IGTS8. Expression of this gene in JB55 supported conversion of DBTO2 (the natural substrate for DszA) to HPBS, but activity against gasoline was low and BDS results were inconsistent. It appeared that activity was directed against C2- and C3-thiophenes. Efforts to increase gene expression by plasmid manipulation, by addition of flavin reductase genes, or by expression in PpG1 were unsuccessful. The DszC protein (DBT monooxygenase) from IGTS8 has very little activity against the sulfur compounds in gasoline, but a mutant enzyme with a substitution of phenylalanine for valine at position 261 was shown to have an altered substrate range. This alteration resulted in increased activity against gasoline, with activity towards mainly C3- and C4-thiophenes and benzothiophene. A mutant library of dszB was constructed by RACHITT (W. C. Coco et al., DNA shuffling method for generating highly recombined genes and evolved enzymes. 2001. Nature Biotech. 19:354-359) method of in vitro recombination. Methods for analysis were developed and a preliminary analysis of the library was performed. A preliminary gasoline process design was constructed and process economics were determined based upon assumptions made from experimental results. The projected cost of gasoline BDS was determined to be competitive with current competing technologies.

  14. 15.783J / 2.739J / ESD.32J Product Design and Development, Spring 2002

    E-Print Network [OSTI]

    Eppinger, Steven D.

    Covers modern tools and methods for product design and development. The cornerstone is a project in which teams of management, engineering, and industrial design students conceive, design, and prototype a physical product. ...

  15. A Continuous Solar Thermochemical Hydrogen Production Plant Design

    E-Print Network [OSTI]

    Luc, Wesley Wai

    Enthalpy [MW] 1.6869e-07 4.5 Heat Integration The SA thermochemicalthermochemical cycle (WSTC) for hydrogen production is that the sum of enthalpies

  16. Information Hiding in Product Development: The Design Churn Effect

    E-Print Network [OSTI]

    Whitney, Daniel

    2002-06-07

    Execution of a complex product development project is facilitated through its decomposition into an interrelated set of localized development tasks. When a local ...

  17. Qualities That Define a Well-Designed Product 

    E-Print Network [OSTI]

    Pirics, Marjorie

    2011-08-08

    context. As a tool, this process will give myself and other young industrial designers a starting platform for their own designs. My hope is that my research project can play a small, yet significant role in the paradigm shift and perhaps allow me...

  18. A Continuous Solar Thermochemical Hydrogen Production Plant Design

    E-Print Network [OSTI]

    Luc, Wesley Wai

    continuous solar thermal production plant in order to determine the overall viability of the process.process flow sheet that realistically simulates the SA cycle as a continuous solar thermal productionprocess simulator that best simulates the SA cycle in a continuous solar thermal hydrogen production

  19. Linking Marketing and Engineering Product Design Decisions via Analytical Target Cascading

    E-Print Network [OSTI]

    Papalambros, Panos

    Linking Marketing and Engineering Product Design Decisions via Analytical Target CascadingĂ Jeremy to consumers and are feasible to produce. The resulting marketing and engineering design goals are driven of coordinating marketing and engineering design problems in a way that is proven to yield the joint optimal

  20. Universal Design Rules from Product Pairs and Association Rule Based Learning 

    E-Print Network [OSTI]

    Cowen, Nicholas L.

    2010-07-14

    of a manual can opener being the typical product and the electric can opener being the more universal design ...................................................................................................... 25 Fig. 14 The actionfunction... diagram for the typical manual can opener design .. 26 Fig. 15 The actionfunction diagram for the more universal electrical can opener design ...................................................................................................... 26...

  1. Article Revue XXX DESIGN AND VALIDATION OF A PRODUCT-DRIVEN CONTROL SYSTEM BASED ON A

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Author manuscript, published in "Production Planning & Control (2009) 142-156" DOI : 10.1080/09537280902Article Revue XXX 1 DESIGN AND VALIDATION OF A PRODUCT-DRIVEN CONTROL SYSTEM BASED ON A SIX SIGMA Driven System (PDS) concept can be seen as an innovative control concept that advocates that a product

  2. Product Design and Innovation Arthur L. Rosenthal, PhD

    E-Print Network [OSTI]

    Vajda, Sandor

    Draft by October 27 · 10/27 Risk Management - FMEA tool · AS12 Draft FMEA for Project Product - hard copy and PDF by Oct. 29 · 10/29 FMEA Workshop · AS13 Prepare Final Project Prodcut FMEA - hard copy

  3. Assessment of Summer 1997 Motor Gasoline Price Increase

    Reports and Publications (EIA)

    1998-01-01

    Assesses the 1997 late summer gasoline market and some of the important issues surrounding that event.

  4. Healthcare product-service system characterisation - implications for design

    E-Print Network [OSTI]

    Yip, Man Hang

    2015-06-30

    the Cambridge Service Alliance. For introducing me to service design and medical device design: Krista Keränen and Jon Johnson. For introducing me to actor-network theory: Alexander Orona. For broadening my knowledge of healthcare regulations: Alan Davies... is an unprecedented, enduring, and pervasive “global phenomenon”, affecting economic, social, and political aspects of life (Population Division DESA United Nations, 2002). On the one hand, there is a growing demand for new medical technologies from healthcare...

  5. Evaluating the End-of-Life Phase of Consumer Electronics:Methods and Tools to Improve Product Design and Material Recovery

    E-Print Network [OSTI]

    Mangold, Jennifer Ann

    2013-01-01

    Summary . . . . . . . . . . . . . . . . . Design Criteria into Include Product Design Criteria in the Recyclabilitymass, value, and design based criteria. This dissertation is

  6. Weigh options for meeting future gasoline sulfur specifications

    SciTech Connect (OSTI)

    Johnson, T.E.

    1997-03-01

    The most frequently mentioned methods for reducing pool gasoline sulfur to the 50-ppm range are FCC feed hydrotreating and desulfurization of heavy cat naptha (HCN). Of these, cat feed hydrotreating (CFH) is preferred because of the compelling economics of improved FCC gasoline yield. Also, the additional C{sub 3}/C{sub 4} olefin yield opens up the possibility of additional production of sulfur-free alkylate and oxygenate. In addition to the obvious yield benefits, the ability to upgrade lower quality, higher sulfur stocks for inclusion in the FCC charge slate, while lowering flue gas SO{sub x} emissions, is also advantageous to the refiner. However, depending o the level of FCC feed sulfur and the severity of hydrotreating used, it may not be possible to meet 50-ppm sulfur in the gasoline pool. Two possible solutions to this problem are to use: (1) a very severe cat feed hydrotreating operation (i.e., 98%-plus desulfurization), (2) partial conversion hydrocracking.

  7. Supply Chain Sustainability Analysis of Indirect Liquefaction of Blended Biomass to Produce High Octane Gasoline

    SciTech Connect (OSTI)

    Cai, Hao; Canter, Christina E.; Dunn, Jennifer B.; Tan, Eric; Biddy, Mary; Talmadge, Michael; Hartley, Damon S.; Snowden-Swan, Lesley

    2015-09-01

    The Department of Energy’s (DOE) Bioenergy Technologies Office (BETO) aims at developing and deploying technologies to transform renewable biomass resources into commercially viable, high-performance biofuels, bioproducts and biopower through public and private partnerships (DOE, 2015). BETO also performs a supply chain sustainability analysis (SCSA). This report describes the SCSA of the production of renewable high octane gasoline (HOG) via indirect liquefaction (IDL) of lignocellulosic biomass. This SCSA was developed for the 2017 design case for feedstock logistics (INL, 2014) and for the 2022 target case for HOG production via IDL (Tan et al., 2015). The design includes advancements that are likely and targeted to be achieved by 2017 for the feedstock logistics and 2022 for the IDL conversion process. The 2017 design case for feedstock logistics demonstrated a delivered feedstock cost of $80 per dry U.S. short ton by the year 2017 (INL, 2014). The 2022 design case for the conversion process, as modeled in Tan et al. (2015), uses the feedstock 2017 design case blend of biomass feedstocks consisting of pulpwood, wood residue, switchgrass, and construction and demolition waste (C&D) with performance properties consistent with a sole woody feedstock type (e.g., pine or poplar). The HOG SCSA case considers the 2017 feedstock design case (the blend) as well as individual feedstock cases separately as alternative scenarios when the feedstock blend ratio varies as a result of a change in feedstock availability. These scenarios could be viewed as bounding SCSA results because of distinctive requirements for energy and chemical inputs for the production and logistics of different components of the blend feedstocks.

  8. ADVANCED TURBINE SYSTEM CONCEPTUAL DESIGN AND PRODUCT DEVELOPMENT - Final Report

    SciTech Connect (OSTI)

    Albrecht H. Mayer

    2000-07-15

    Asea Brown Boveri (ABB) has completed its technology based program. The results developed under Work Breakdown Structure (WBS) 8, concentrated on technology development and demonstration have been partially implemented in newer turbine designs. A significant improvement in heat rate and power output has been demonstrated. ABB will use the knowledge gained to further improve the efficiency of its Advanced Cycle System, which has been developed and introduced into the marked out side ABB's Advanced Turbine System (ATS) activities. The technology will lead to a power plant design that meets the ATS performance goals of over 60% plant efficiency, decreased electricity costs to consumers and lowest emissions.

  9. Designer synthetic media for studying microbial-catalyzed biofuel production

    SciTech Connect (OSTI)

    Tang, Xiaoyu [Biogas Inst. of Ministry of Agriculture, Chengdu (China); da Costa Sousa, Leonardo [Michigan State Univ., East Lansing, MI (United States); Jin, Mingjie [Michigan State Univ., East Lansing, MI (United States); Chundawat, Shishir [Michigan State Univ., East Lansing, MI (United States); State Univ. of New Jersey, Piscataway, NJ (United States); Chambliss, Charles [Baylor Univ., Waco, TX (United States); Lau, Ming W [Michigan State Univ., East Lansing, MI (United States); Xiao, Zeyi [Sichuan Univ., Chengdu (China); Dale, Bruce E [Michigan State Univ., East Lansing, MI (United States); Balan, Venkatesh [Michigan State Univ., East Lansing, MI (United States)

    2015-01-01

    Background: The fermentation inhibition of yeast or bacteria by lignocellulose-derived degradation products, during hexose/pentose co-fermentation, is a major bottleneck for cost-effective lignocellulosic biorefineries. To engineer microbial strains for improved performance, it is critical to understand the mechanisms of inhibition that affect fermentative organisms in the presence of major components of a lignocellulosic hydrolysate. The development of a synthetic lignocellulosic hydrolysate (SH) media with a composition similar to the actual biomass hydrolysate will be an important advancement to facilitate these studies. In this work, we characterized the nutrients and plant-derived decomposition products present in AFEX™ pretreated corn stover hydrolysate (ACH). The SH was formulated based on the ACH composition and was further used to evaluate the inhibitory effects of various families of decomposition products during Saccharomyces cerevisiae 424A (LNH-ST) fermentation. Results: The ACH contained high levels of nitrogenous compounds, notably amides, pyrazines, and imidazoles. In contrast, a relatively low content of furans and aromatic and aliphatic acids were found in the ACH. Though most of the families of decomposition products were inhibitory to xylose fermentation, due to their abundance, the nitrogenous compounds showed the most inhibition. From these compounds, amides (products of the ammonolysis reaction) contributed the most to the reduction of the fermentation performance. However, this result is associated to a concentration effect, as the corresponding carboxylic acids (products of hydrolysis) promoted greater inhibition when present at the same molar concentration as the amides. Due to its complexity, the formulated SH did not perfectly match the fermentation profile of the actual hydrolysate, especially the growth curve. However, the SH formulation was effective for studying the inhibitory effect of various compounds on yeast fermentation. Conclusions: The formulation of SHs is an important advancement for future multi-omics studies and for better understanding the mechanisms of fermentation inhibition in lignocellulosic hydrolysates. The SH formulated in this work was instrumental for defining the most important inhibitors in the ACH. Major AFEX decomposition products are less inhibitory to yeast fermentation than the products of dilute acid or steam explosion pretreatments; thus, ACH is readily fermentable by yeast without any detoxification.

  10. Designer synthetic media for studying microbial-catalyzed biofuel production

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Tang, Xiaoyu; da Costa Sousa, Leonardo; Jin, Mingjie; Chundawat, Shishir; Chambliss, Charles; Lau, Ming W; Xiao, Zeyi; Dale, Bruce E; Balan, Venkatesh

    2015-01-01

    Background: The fermentation inhibition of yeast or bacteria by lignocellulose-derived degradation products, during hexose/pentose co-fermentation, is a major bottleneck for cost-effective lignocellulosic biorefineries. To engineer microbial strains for improved performance, it is critical to understand the mechanisms of inhibition that affect fermentative organisms in the presence of major components of a lignocellulosic hydrolysate. The development of a synthetic lignocellulosic hydrolysate (SH) media with a composition similar to the actual biomass hydrolysate will be an important advancement to facilitate these studies. In this work, we characterized the nutrients and plant-derived decomposition products present in AFEX™ pretreated corn stover hydrolysate (ACH). Themore »SH was formulated based on the ACH composition and was further used to evaluate the inhibitory effects of various families of decomposition products during Saccharomyces cerevisiae 424A (LNH-ST) fermentation. Results: The ACH contained high levels of nitrogenous compounds, notably amides, pyrazines, and imidazoles. In contrast, a relatively low content of furans and aromatic and aliphatic acids were found in the ACH. Though most of the families of decomposition products were inhibitory to xylose fermentation, due to their abundance, the nitrogenous compounds showed the most inhibition. From these compounds, amides (products of the ammonolysis reaction) contributed the most to the reduction of the fermentation performance. However, this result is associated to a concentration effect, as the corresponding carboxylic acids (products of hydrolysis) promoted greater inhibition when present at the same molar concentration as the amides. Due to its complexity, the formulated SH did not perfectly match the fermentation profile of the actual hydrolysate, especially the growth curve. However, the SH formulation was effective for studying the inhibitory effect of various compounds on yeast fermentation. Conclusions: The formulation of SHs is an important advancement for future multi-omics studies and for better understanding the mechanisms of fermentation inhibition in lignocellulosic hydrolysates. The SH formulated in this work was instrumental for defining the most important inhibitors in the ACH. Major AFEX decomposition products are less inhibitory to yeast fermentation than the products of dilute acid or steam explosion pretreatments; thus, ACH is readily fermentable by yeast without any detoxification.« less

  11. High Ethanol Fuel Endurance: A Study of the Effects of Running Gasoline with 15% Ethanol Concentration in Current Production Outboard Four-Stroke Engines and Conventional Two-Stroke Outboard Marine Engines

    SciTech Connect (OSTI)

    Hilbert, D.

    2011-10-01

    Three Mercury Marine outboard marine engines were evaluated for durability using E15 fuel -- gasoline blended with 15% ethanol. Direct comparison was made to operation on E0 (ethanol-free gasoline) to determine the effects of increased ethanol on engine durability. Testing was conducted using a 300-hour wide-open throttle (WOT) test protocol, a typical durability cycle used by the outboard marine industry. Use of E15 resulted in reduced CO emissions, as expected for open-loop, non-feedback control engines. HC emissions effects were variable. Exhaust gas and engine operating temperatures increased as a consequence of leaner operation. Each E15 test engine exhibited some deterioration that may have been related to the test fuel. The 9.9 HP, four-stroke E15 engine exhibited variable hydrocarbon emissions at 300 hours -- an indication of lean misfire. The 300HP, four-stroke, supercharged Verado engine and the 200HP, two-stroke legacy engine tested with E15 fuel failed to complete the durability test. The Verado engine failed three exhaust valves at 285 endurance hours while the 200HP legacy engine failed a main crank bearing at 256 endurance hours. All E0-dedicated engines completed the durability cycle without incident. Additional testing is necessary to link the observed engine failures to ethanol in the test fuel.

  12. A study of the spray injection Reynolds number effects on gasoline yields of an FCC riser reactor

    SciTech Connect (OSTI)

    Bowman, B. J.; Zhou, C. Q.; Chang, S. L.; Lottes, S. A.

    2000-04-03

    A computational analysis of the combined effects of feed oil injection parameters in a commercial-scale fluidized catalytic cracking riser reactor was performed using a three-phase, multiple species kinetic cracking computer code. The analysis showed that the injection operating parameters (droplet diameter and injection velocity) had strong impacts on the gasoline yields of the FCC unit. A spray injection Reynolds number combining the two parameters was defined. A correlation between the spray injection Reynolds number and the gasoline product yields for various feed injection conditions was developed. A range of spray injection Reynolds number for the maximum gasoline yield was identified.

  13. Edgeworth price cycles in retail gasoline markets

    E-Print Network [OSTI]

    Noel, Michael David, 1971-

    2002-01-01

    In this dissertation, I present three essays that are motivated by the interesting and dynamic price-setting behavior of firms in Canadian retail gasoline markets. In the first essay, I examine behavior at the market level ...

  14. Insights into Spring 2008 Gasoline Prices

    Reports and Publications (EIA)

    2008-01-01

    Gasoline prices rose rapidly in spring 2007 due a variety of factors, including refinery outages and lower than expected imports. This report explores those factors and looks at the implications for 2008.

  15. Reformulated Gasoline Market Affected Refiners Differently, 1995

    Reports and Publications (EIA)

    1996-01-01

    This article focuses on the costs of producing reformulated gasoline (RFG) as experienced by different types of refiners and on how these refiners fared this past summer, given the prices for RFG at the refinery gate.

  16. Vertical Integration in Gasoline Supply: An Empirical Test of Raising Rivals' Costs

    E-Print Network [OSTI]

    Gilbert, Richard; Hastings, Justine

    2001-01-01

    Vertical Integration in Gasoline Supply: An Empirical Testoligopoly, market power, gasoline Abstract: This paperand distribution of gasoline and the wholesale price of

  17. Edgeworth Price Cycles, Cost-based Pricing and Sticky Pricing in Retail Gasoline Markets

    E-Print Network [OSTI]

    Noel, Michael

    2004-01-01

    Robbery, An Analysis of the Gasoline Crisis”, Bloomington:Dynamic Pricing in Retail gasoline Markets”, RAND Journal ofR. Gilbert. “Do Gasoline Markets Respond Asymmetrically to

  18. Demand for gasoline is more price-inelastic than commonly thought

    E-Print Network [OSTI]

    Havranek, Tomas; Irsova, Zuzana; Janda, Karel

    2011-01-01

    of Transportation and Gasoline Demand. ” Bell Journal ofA Semiparametric Analysis of Gasoline Demand in the Uniteda dynamic demand function for gasoline with di?erent schemes

  19. The Speed of Gasoline Price Response in Markets With and Without Edgeworth Cycles

    E-Print Network [OSTI]

    Lewis, Matt; Noel, Michael

    2009-01-01

    An Examination of the Retail Gasoline Market,” July 2005.OH. , “Temporary Wholesale Gasoline Price Spikes have Long-from the Toronto Retail Gasoline Market,” Journal of

  20. Vertical Integration in Gasoline Supply: An Empirical Test of Raising Rivals' Costs

    E-Print Network [OSTI]

    Gilbert, Richard; Hastings, Justine

    2001-01-01

    Vertical Integration in Gasoline Supply: An Empirical Testfor the reŢning and distribution of gasoline and the whole-sale price of unbranded gasoline sold to independent

  1. Gasoline Price Differences: Taxes, Pollution Regulations, Mergers, Market Power, and Market Conditions

    E-Print Network [OSTI]

    Chouinard, Hayley; Perloff, Jeffrey M.

    2002-01-01

    1 2. A Reduced-Form Gasoline PriceThe Case of Retail Gasoline Markets,” The Journal of Law andof Organizational Form in Gasoline Retailing and the Costs

  2. Premium Gasoline Overbuying in the U.S.: Consumer-Based Choice Analysis

    E-Print Network [OSTI]

    Setiawan, Winardi; Sperling, Daniel

    1993-01-01

    1990), Economics gasoline pool octane of growth, U.S.sensitive to modest is gasoline price shifts. Theprimary1991b), Effect of gasoline octane quality on vehicle

  3. Premium Gasoline Overbuying in the U.S.: Consumer-Based Choice Analysis

    E-Print Network [OSTI]

    Setiawan, Winardi; Sperling, Daniel

    2001-01-01

    1990), Economics gasoline pool octane of growth, U.S.sensitive to modest is gasoline price shifts. Theprimary1991b), Effect of gasoline octane quality on vehicle

  4. Do Gasoline Prices Resond Asymmetrically to Cost Shocks? The Confounding Effect of Edgeworth Cycles

    E-Print Network [OSTI]

    Noel, Michael

    2007-01-01

    Atkinson, B . (2006) "Retail Gasoline Price Cycles: EvidenceEvidence on Asymmetric Gasoline Price Re­ and Statistics "of Adjustment of U K Retail Gasoline Prices to Cost Changes"

  5. Impact of California Reformulated Gasoline on Motor Vehicle Emissions. 2. Volatile Organic Compound Speciation and Reactivity

    E-Print Network [OSTI]

    Kirchstetter, Thomas; Singer, Brett; Harley, Robert

    1999-01-01

    California Reformulated Gasoline On Motor Vehicle EmissionsCalifornia Reformulated Gasoline on Motor Vehicle EmmissionsBerkeley Environ. ScLTechnoL gasoline Impact California of

  6. The Implications of a Gasoline Price Floor for the California Budget and Greenhouse Gas Emissions

    E-Print Network [OSTI]

    Borenstein, Severin

    2008-01-01

    May 2004. Espey, M. “Gasoline Demand Revisited: AnRun Price Elasticity of Gasoline Demand,” Energy Journal,114. Poterba, J. “Is the Gasoline Tax Regressive? ,” in D.

  7. Development of a Fischer-Tropsch Gasoline Process for the Steam Hydrogasification Technology

    E-Print Network [OSTI]

    Li, Yang

    2013-01-01

    M. ,   et   al. ,   Gasoline  conversion:  reactivity  al. ,   Methanol   to   gasoline   over   zeolite   H-­?of a Fischer-Tropsch Gasoline Process for the Steam

  8. Evidence of a Shift in the Short-Run Price Elasticity of Gasoline Demand

    E-Print Network [OSTI]

    Hughes, Jonathan; Knittel, Christopher R; Sperling, Dan

    2007-01-01

    An Empirical-Analysis of Gasoline Demand in Denmark UsingT. (1991). "Analyzing Gasoline Demand Elasticities: AConsumer Adjustment to a Gasoline Tax." The Review of

  9. Impact of California Reformulated Gasoline On Motor Vehicle Emissions. 1. Mass Emission Rates

    E-Print Network [OSTI]

    Kirchstetter, Thomas W.; Singer, Brett C.; Harley, Robert A.

    1999-01-01

    California reformulated gasoline on motor vehicle emissions.Impact of California Reformulated Gasoline OIl Motor Vehicleprogress, increased vehicle Gasoline Motor on Vehicle travel

  10. Lifecycle Analysis of Air Quality Impacts of Hydrogen and Gasoline Transportation Fuel Pathways

    E-Print Network [OSTI]

    Wang, Guihua

    2008-01-01

    of hydrogen, methanol and gasoline as fuels for fuel cellon Environmental Quality (TCEQ). Gasoline Vapor Recovery (Quality Impacts of Hydrogen and Gasoline Transportation Fuel

  11. Clearing the Air: The Clean Air Act, GATT and the WTO's Reformulated Gasoline Decision

    E-Print Network [OSTI]

    McCrory, Martin A.; Richards, Eric L.

    1998-01-01

    Reformulated and Conventional Gasoline, 5 MwIN. J. GLOBALReformulated and Conventional Gasoline, 35 I.L.M. 274, 277 (regulations governing gasoline formulation to ensure that

  12. Asymmetric Price Adjustment and Consumer Search: An Examination of the Retail Gasoline Market

    E-Print Network [OSTI]

    Lewis, Matt

    2004-01-01

    and R. Gilbert (1997) “Do Gasoline Prices Respond Asymmet-George. (2004) “Retail Gasoline Price Dynamics and LocalAsymmetries in Local Gasoline Markets” Energy Economics

  13. Asymmetric Price Adjustment and Consumer Search: An Examination of the Retail Gasoline Market

    E-Print Network [OSTI]

    Lewis, Matt

    2004-01-01

    Competition in Retail Gasoline Markets: Empirical EvidenceAn Examination of the Retail Gasoline Market Matt Lewis*An Examination of the Retail Gasoline Market Matthew Lewis ?

  14. The Speed of Gasoline Price Response in Markets With and Without Edgeworth Cycles

    E-Print Network [OSTI]

    Lewis, Matt; Noel, Michael

    2009-01-01

    An Examination of the Retail Gasoline Market,” July 2005.the Toronto Retail Gasoline Market,” Journal of IndustrialPower? Evidence from the Retail Gasoline Market,” Journal of

  15. Clearing the Air: The Clean Air Act, GATT and the WTO's Reformulated Gasoline Decision

    E-Print Network [OSTI]

    McCrory, Martin A.; Richards, Eric L.

    1998-01-01

    method requires oil companies to produce gasoline that meetsgas requirements. Companies could certify their gasoline byoil company. PDVSA claimed that the reformulated gasoline

  16. Gasoline Price Differences: Taxes, Pollution Regulations, Mergers, Market Power, and Market Conditions

    E-Print Network [OSTI]

    Chouinard, Hayley; Perloff, Jeffrey M.

    2002-01-01

    Gasoline Vertical Relations Lease Operated Company OperatedGasoline Vertical Relations Lease Operated Company OperatedGasoline Law (0 – 1) Vertical Relations Lease Operated (%) Company

  17. Accelerator production of tritium pollution prevention design assessment

    SciTech Connect (OSTI)

    Reynolds, R.; Nowacki, P.; Sheetz, S.O.; Lanik, P.

    1997-09-18

    This Pollution Prevention Design Assessment (PPDA) provides data for cost-benefit analysis of the potential environmental impact of the APT, is an integral part of pollution prevention/waste minimization, and is required by DOE for any activity generating radioactive, hazardous, and mixed wastes. It will also better position the APT to meet future requirements, since it is anticipated that regulatory and other requirements will continue to become more restrictive and demanding.

  18. Designating Efficiency Levels for Product Categories | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum Based| Department8, 20153Danielthrough theKDesert PeakofProducts &

  19. Chemistry Impacts in Gasoline HCCI

    SciTech Connect (OSTI)

    Szybist, James P [ORNL; Bunting, Bruce G [ORNL

    2006-09-01

    The use of homogeneous charge compression ignition (HCCI) combustion in internal combustion engines is of interest because it has the potential to produce low oxides of nitrogen (NOx) and particulate matter (PM) emissions while providing diesel-like efficiency. In HCCI combustion, a premixed charge of fuel and air auto-ignites at multiple points in the cylinder near top dead center (TDC), resulting in rapid combustion with very little flame propagation. In order to prevent excessive knocking during HCCI combustion, it must take place in a dilute environment, resulting from either operating fuel lean or providing high levels of either internal or external exhaust gas recirculation (EGR). Operating the engine in a dilute environment can substantially reduce the pumping losses, thus providing the main efficiency advantage compared to spark-ignition (SI) engines. Low NOx and PM emissions have been reported by virtually all researchers for operation under HCCI conditions. The precise emissions can vary depending on how well mixed the intake charge is, the fuel used, and the phasing of the HCCI combustion event; but it is common for there to be no measurable PM emissions and NOx emissions <10 ppm. Much of the early HCCI work was done on 2-stroke engines, and in these studies the CO and hydrocarbon emissions were reported to decrease [1]. However, in modern 4-stroke engines, the CO and hydrocarbon emissions from HCCI usually represent a marked increase compared with conventional SI combustion. This literature review does not report on HCCI emissions because the trends mentioned above are well established in the literature. The main focus of this literature review is the auto-ignition performance of gasoline-type fuels. It follows that this discussion relies heavily on the extensive information available about gasoline auto-ignition from studying knock in SI engines. Section 2 discusses hydrocarbon auto-ignition, the octane number scale, the chemistry behind it, its shortcomings, and its relevance to HCCI. Section 3 discusses the effects of fuel volatility on fuel and air mixing and the consequences it has on HCCI. The effects of alcohol fuels on HCCI performance, and specifically the effects that they have on the operable speed/load range, are reviewed in Section 4. Finally, conclusions are drawn in Section 5.

  20. Hands-on online : towards experiential product design education with online resources

    E-Print Network [OSTI]

    Ramos, Joshua D

    2013-01-01

    This pilot study investigates the potential for teaching experiential, hands-on product design online. Specifically, the work is a first attempt to elucidate differences in outcomes between residential, hands-on educational ...

  1. Structural design of a lunar lander spacecraft for the Texas space grant regolith oxygen production experiment 

    E-Print Network [OSTI]

    Baccus, Ronald Kregg

    1996-01-01

    The focus of this research is the determination of a structural design for the lunar lander spacecraft currently being developed by the Texas Space Grant Consortium to transport a regolith oxygen production experiment to the surface of the moon...

  2. Power Optimization of Sum-of-Products Design for Signal Processing Applications

    E-Print Network [OSTI]

    Heo, Seok Won

    2014-01-01

    constant," in Proc. VLSI Signal Processing, VI, pp. 388–396,products design for signal processing applications, in Proc.Workshop on VLSI Signal Processing, IX, Oct. –Nov. 1996, pp.

  3. Molten carbonate fuel cell product design improvement. Annual report, December 20, 1996--December 20, 1997

    SciTech Connect (OSTI)

    Maru, H.C.; Farooque, M.

    1998-09-01

    This program is designed to advance the carbonate fuel cell technology from the current full-size field test to the commercial design by the turn of the century. The specific objectives selected to attain the overall program goal are: Define power plant requirements and specifications; Establish the design for a multifuel, low-cost, modular, market-responsive power plant; Resolve power plant manufacturing issues and define the design for the commercial-scale manufacturing facility; Define the stack and balance-of-plant (BOP) equipment packaging arrangement and module designs; Acquire capability to support developmental testing of stacks and critical BOP equipment to prepare for commercial design; and Resolve stack and BOP equipment technology issues, and design, build, and field test a modular prototype power plant to demonstrate readiness for commercial entry. ERC is currently in the third year of the multiyear program for development and demonstration of a MW-class power plant. The product definition and specification have been derived with input from potential users, including the Fuel Cell Commercialization Group (FCCG). The baseline power plant final design has been completed. Detailed power plant system and packaging designs are being developed using stack and BOP development results. A MW-scale prototype modular power plant representative of the commercial design is planned. Based on the experience and data generated in the current program, ERC also plans to acquire manufacturing capability for market-entry products through expansion of the existing Torrington production facility.

  4. ME 4171 Environmentally Conscious Design & Manufacturing (Bras) Assignment Aircraft Fuel Tank Production Pollution Prevention

    E-Print Network [OSTI]

    is ready to be shipped. a) Draw a process diagram for the fuel tank production. (10 points) b) CreateME 4171 ­ Environmentally Conscious Design & Manufacturing (Bras) Assignment ­ Aircraft Fuel Tank Production Pollution Prevention A local company manufactures a wide variety of fabric fuel tanks for use

  5. Photobioreactor Design for Commercial Biofuel Production from Microalgae Aditya M. Kunjapur* and R. Bruce Eldridge

    E-Print Network [OSTI]

    Eldridge, R. Bruce

    Photobioreactor Design for Commercial Biofuel Production from Microalgae Aditya M. Kunjapur* and R This review paper describes systems used to cultivate microalgae for biofuel production. It addresses general of biofuel. This paper also highlights the concept of combining open and closed systems and concludes

  6. Energy, Environmental, and Economic Analyses of Design Concepts for the Co-Production of Fuels and Chemicals with Electricity via Co-Gasification of Coal and Biomass

    SciTech Connect (OSTI)

    Eric Larson; Robert Williams; Thomas Kreutz; Ilkka Hannula; Andrea Lanzini; Guangjian Liu

    2012-03-11

    The overall objective of this project was to quantify the energy, environmental, and economic performance of industrial facilities that would coproduce electricity and transportation fuels or chemicals from a mixture of coal and biomass via co-gasification in a single pressurized, oxygen-blown, entrained-flow gasifier, with capture and storage of CO{sub 2} (CCS). The work sought to identify plant designs with promising (Nth plant) economics, superior environmental footprints, and the potential to be deployed at scale as a means for simultaneously achieving enhanced energy security and deep reductions in U.S. GHG emissions in the coming decades. Designs included systems using primarily already-commercialized component technologies, which may have the potential for near-term deployment at scale, as well as systems incorporating some advanced technologies at various stages of R&D. All of the coproduction designs have the common attribute of producing some electricity and also of capturing CO{sub 2} for storage. For each of the co-product pairs detailed process mass and energy simulations (using Aspen Plus software) were developed for a set of alternative process configurations, on the basis of which lifecycle greenhouse gas emissions, Nth plant economic performance, and other characteristics were evaluated for each configuration. In developing each set of process configurations, focused attention was given to understanding the influence of biomass input fraction and electricity output fraction. Self-consistent evaluations were also carried out for gasification-based reference systems producing only electricity from coal, including integrated gasification combined cycle (IGCC) and integrated gasification solid-oxide fuel cell (IGFC) systems. The reason biomass is considered as a co-feed with coal in cases when gasoline or olefins are co-produced with electricity is to help reduce lifecycle greenhouse gas (GHG) emissions for these systems. Storing biomass-derived CO{sub 2} underground represents negative CO{sub 2} emissions if the biomass is grown sustainably (i.e., if one ton of new biomass growth replaces each ton consumed), and this offsets positive CO{sub 2} emissions associated with the coal used in these systems. Different coal:biomass input ratios will produce different net lifecycle greenhouse gas (GHG) emissions for these systems, which is the reason that attention in our analysis was given to the impact of the biomass input fraction. In the case of systems that produce only products with no carbon content, namely electricity, ammonia and hydrogen, only coal was considered as a feedstock because it is possible in theory to essentially fully decarbonize such products by capturing all of the coal-derived CO{sub 2} during the production process.

  7. The potential for alcohols and related ethers to displace conventional gasoline components

    SciTech Connect (OSTI)

    Hadder, G.R.; McNutt, B.D.

    1996-02-01

    The United States Department of Energy is required by law to determine the feasibility of producing sufficient replacement fuels to replace 30 percent of the projected United States consumption of motor fuels by light duty vehicles in the year 2010. A replacement fuel is a non-petroleum portion of gasoline, including alcohols, natural gas and certain other components. A linear program has been used to study refinery impacts for production of ``low petroleum`` gasolines, which contain replacement fuels. The analysis suggests that high oxygenation is the key to meeting the replacement fuel target, and major contributors to cost increase can include investment in processes to produce olefins for etherification with alcohols. High oxygenation can increase the costs of control of vapor pressure, distillation properties, and pollutant emissions of gasolines. Year-round low petroleum gasoline with near-30 percent non-petroleum might be produced with cost increases of 23 to 37 cents per gallon, with substantial decreases in greenhouse gas emissions in some cases. Cost estimates are sensitive to assumptions about extrapolation of a national model for pollutant emissions, availability of raw materials and other issues. Reduction in crude oil use, a major objective of the low petroleum gasoline program, is 10 to 17 percent in the analysis.

  8. The Speed of Gasoline Price Response in Markets With and Without Edgeworth Cycles

    E-Print Network [OSTI]

    Lewis, Matt; Noel, Michael

    2009-01-01

    Retail Gasoline Price Dynamics and Local Market Power,”of Local Market Power? Evidence from the Retail Gasoline

  9. Revisiting the Income Effect: Gasoline Prices and Grocery Purchases

    E-Print Network [OSTI]

    Gicheva, Dora; Hastings, Justine; Villas-Boas, Sofia B

    2008-01-01

    Gasoline and Crude Oil Prices, 2000-2006 Figure I:Weekly Gasoline and Crude Oil Prices for 2001- 2006 Crudeargue that increases in oil prices may lead to recessions

  10. Motor Gasoline Market Spring 2007 and Implications for Spring 2008

    Reports and Publications (EIA)

    2008-01-01

    This report focuses on the major factors that drove the widening difference between wholesale gasoline and crude oil prices in 2007 and explores how those factors might impact gasoline prices in 2008.

  11. Fact #569: May 4, 2009 Gasoline Prices Around the World

    Broader source: Energy.gov [DOE]

    A survey of worldwide gasoline prices for February and March, 2009, shows that European countries had the highest prices for gasoline with the Netherlands topping the list at $6.25 per gallon. The...

  12. Combustion and Emissions Performance of Dual-Fuel Gasoline and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Combustion and Emissions Performance of Dual-Fuel Gasoline and Diesel HECC on a Multi-Cylinder Light Duty Diesel Engine Combustion and Emissions Performance of Dual-Fuel Gasoline...

  13. Demand and Price Uncertainty: Rational Habits in International Gasoline Demand

    E-Print Network [OSTI]

    Scott, K. Rebecca

    2013-01-01

    global gasoline and diesel price and income elasticities.shift in the short-run price elasticity of gasoline demand.Habits and Uncertain Relative Prices: Simulating Petrol Con-

  14. Demand and Price Volatility: Rational Habits in International Gasoline Demand

    E-Print Network [OSTI]

    Scott, K. Rebecca

    2011-01-01

    shift in the short-run price elasticity of gasoline demand.A meta-analysis of the price elasticity of gasoline demand.2007. Consumer demand un- der price uncertainty: Empirical

  15. Analysis of Improved Reference Design for a Nuclear-Driven High Temperature Electrolysis Hydrogen Production Plant

    SciTech Connect (OSTI)

    Edwin A. Harvego; James E. O'Brien; Michael G. McKellar

    2010-06-01

    The use of High Temperature Electrolysis (HTE) for the efficient production of hydrogen without the greenhouse gas emissions associated with conventional fossil-fuel hydrogen production techniques has been under investigation at the Idaho National Engineering Laboratory (INL) for the last several years. The activities at the INL have included the development, testing and analysis of large numbers of solid oxide electrolysis cells, and the analyses of potential plant designs for large scale production of hydrogen using an advanced Very-High Temperature Reactor (VHTR) to provide the process heat and electricity to drive the electrolysis process. The results of these system analyses, using the UniSim process analysis software, have shown that the HTE process, when coupled to a VHTR capable of operating at reactor outlet temperatures of 800 °C to 950 °C, has the potential to produce the large quantities of hydrogen needed to meet future energy and transportation needs with hydrogen production efficiencies in excess of 50%. In addition, economic analyses performed on the INL reference plant design, optimized to maximize the hydrogen production rate for a 600 MWt VHTR, have shown that a large nuclear-driven HTE hydrogen production plant can to be economically competitive with conventional hydrogen production processes, particularly when the penalties associated with greenhouse gas emissions are considered. The results of this research led to the selection in 2009 of HTE as the preferred concept in the U.S. Department of Energy (DOE) hydrogen technology down-selection process. However, the down-selection process, along with continued technical assessments at the INL, has resulted in a number of proposed modifications and refinements to improve the original INL reference HTE design. These modifications include changes in plant configuration, operating conditions and individual component designs. This paper describes the resulting new INL reference design and presents results of system analyses performed to optimize the design and to determine required plant performance and operating conditions.

  16. Why Do Motor Gasoline Prices Vary Regionally? California Case Study

    Reports and Publications (EIA)

    1998-01-01

    Analysis of the difference between the retail gasoline prices in California and the average U.S. retail prices.

  17. National Survey of E85 and Gasoline Prices

    SciTech Connect (OSTI)

    Bergeron, P.

    2008-10-01

    Study compares the prices of E85 and regular gasoline nationally and regionally over time for one year.

  18. Gasoline prices continue to increase (short version)

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry Natural GasNatural GasEIA lowerslong version) TheGasolineGasoline

  19. Gasoline prices continue to increase (short version)

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry Natural GasNatural GasEIA lowerslong version) TheGasolineGasoline4,

  20. MaDE students will learn all aspects of product realization from product design to manufacturing technologies and operations. Through hands-on experience, the program will provide students with the ability to integrate various design and manufacturing pro

    E-Print Network [OSTI]

    Bustamante, Fabián E.

    prototyping technology into mainstream manufacturing processes 3. Training a workforce to use lean designMaDE students will learn all aspects of product realization from product design to manufacturing to integrate various design and manufacturing processes into an effective system. Information Technology HOW

  1. 1999 2000 2001 2002 2003 2004... 2005 2006 gasoline diesel

    E-Print Network [OSTI]

    Bierlaire, Michel

    1999 2000 2001 2002 2003 2004... 2005 2006 gasoline diesel price +10% gasolinegasoline gasoline diesel... ... 2007 20081998 2009 ...2010 home work home work diesel diesel ... gasoline diesel price -7 of a dynamic discrete-continuous choice model (DDCCM) of car ownership, usage and fuel type. The approach

  2. What Do Consumers Believe About Future Gasoline Soren T. Anderson

    E-Print Network [OSTI]

    Silver, Whendee

    What Do Consumers Believe About Future Gasoline Prices? Soren T. Anderson Michigan State University of consumers about their expectations of future gasoline prices. Overall, we find that consumer beliefs follow a random walk, which we deem a reasonable forecast of gasoline prices, but we find a deviation from

  3. ISSN 1745-9648 Gasoline Prices Jump Up on Mondays

    E-Print Network [OSTI]

    Feigon, Brooke

    ISSN 1745-9648 Gasoline Prices Jump Up on Mondays: an Outcome of Aggressive Competition? by Řystein Research Council is gratefully acknowledged. #12;Gasoline prices jump up on Mondays: An outcome, 2008 Abstract This paper examines Norwegian gasoline pump prices using daily station

  4. Automobile Prices, Gasoline Prices, and Consumer Demand for Fuel Economy

    E-Print Network [OSTI]

    Sadoulet, Elisabeth

    Automobile Prices, Gasoline Prices, and Consumer Demand for Fuel Economy Ashley Langer University 2008 Abstract The relationship between gasoline prices and the demand for vehicle fuel efficiency evidence that automobile manufacturers set vehicle prices as if consumers respond to gasoline prices. We

  5. Vertical Relationships and Competition in Retail Gasoline Markets

    E-Print Network [OSTI]

    California at Berkeley. University of

    PWP-075 Vertical Relationships and Competition in Retail Gasoline Markets: Empirical Evidence from in Retail Gasoline Markets Empirical Evidence from Contract Changes in Southern California Justine S, if any, of the differences in retail gasoline prices between markets is attributable to differences

  6. Short-Term Energy Outlook Model Documentation: Petroleum Products Supply Module

    Reports and Publications (EIA)

    2013-01-01

    The Petroleum Products Supply Module of the Short-Term Energy Outlook (STEO) model provides forecasts of petroleum refinery inputs (crude oil, unfinished oils, pentanes plus, liquefied petroleum gas, motor gasoline blending components, and aviation gasoline blending components) and refinery outputs (motor gasoline, jet fuel, distillate fuel, residual fuel, liquefied petroleum gas, and other petroleum products).

  7. Approved Module Information for PD4002, 2014/5 Module Title/Name: Product Design Innovation Module Code: PD4002

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for PD4002, 2014/5 Module Title/Name: Product Design Innovation Module: . MSc Product Design Innovation. Available to Exchange Students? Not Specified Module Learning to initiate Innovation or Entrepreneurial skills to create product or enterprise proposals and development

  8. IDENTIFYING THE USAGE PATTERNS OF METHYL TERT-BUTYL ETHER (MTBE) AND OTHER OXYGENATES IN GASOLINE USING GASOLINE

    E-Print Network [OSTI]

    IDENTIFYING THE USAGE PATTERNS OF METHYL TERT-BUTYL ETHER (MTBE) AND OTHER OXYGENATES IN GASOLINE USING GASOLINE SURVEYS By Michael J. Moran, Rick M. Clawges, and John S. Zogorski U.S. Geological Survey 1608 Mt. View Rapid City, SD 57702 Methyl tert-butyl ether (MTBE) is commonly added to gasoline

  9. Advanced product realization through model-based design and virtual prototyping

    SciTech Connect (OSTI)

    Andreas, R.D.

    1995-03-01

    Several government agencies and industrial sectors have recognized the need for, and payoff of, investing in the methodologies and associated technologies for improving the product realization process. Within the defense community as well as commercial industry, there are three major needs. First, they must reduce the cost of military products, of related manufacturing processes, and of the enterprises that have to be maintained. Second, they must reduce the time required to realize products while still applying the latest technologies. Finally, they must improve the predictability of process attributes, product performance, cost, schedule and quality. They must continue to advance technology, quickly incorporate their innovations in new products and in processes to produce them, and they need to capitalize on the raw computational power and communications bandwidth that continues to become available at decreasing cost. Sandia National Laboratories initiative is pursuing several interrelated, key concepts and technologies in order to enable such product realization process improvements: model-based design; intelligent manufacturing processes; rapid virtual and physical prototyping; and agile people/enterprises. While progress in each of these areas is necessary, this paper only addresses a portion of the overall initiative. First a vision of a desired future capability in model-based design and virtual prototyping is presented. This is followed by a discussion of two specific activities parametric design analysis of Synthetic Aperture Radars (SARs) and virtual prototyping of miniaturized high-density electronics -- that exemplify the vision as well as provide a status report on relevant work in progress.

  10. Price changes in the gasoline market: Are Midwestern gasoline prices downward sticky?

    SciTech Connect (OSTI)

    NONE

    1999-03-01

    This report examines a recurring question about gasoline markets: why, especially in times of high price volatility, do retail gasoline prices seem to rise quickly but fall back more slowly? Do gasoline prices actually rise faster than they fall, or does this just appear to be the case because people tend to pay more attention to prices when they`re rising? This question is more complex than it might appear to be initially, and it has been addressed by numerous analysts in government, academia and industry. The question is very important, because perceived problems with retail gasoline pricing have been used in arguments for government regulation of prices. The phenomenon of prices at different market levels tending to move differently relative to each other depending on direction is known as price asymmetry. This report summarizes the previous work on gasoline price asymmetry and provides a method for testing for asymmetry in a wide variety of situations. The major finding of this paper is that there is some amount of asymmetry and pattern asymmetry, especially at the retail level, in the Midwestern states that are the focus of the analysis. Nevertheless, both the amount asymmetry and pattern asymmetry are relatively small. In addition, much of the pattern asymmetry detected in this and previous studies could be a statistical artifact caused by the time lags between price changes at different points in the gasoline distribution system. In other words, retail gasoline prices do sometimes rise faster than they fall, but this is largely a lagged market response to an upward shock in the underlying wholesale gasoline or crude oil prices, followed by a return toward the previous baseline. After consistent time lags are factored out, most apparent asymmetry disappears.

  11. New process modeling [sic], design, and control strategies for energy efficiency, high product quality, and improved productivity in the process industries. Final project report

    SciTech Connect (OSTI)

    Ray, W. Harmon

    2002-06-05

    This project was concerned with the development of process design and control strategies for improving energy efficiency, product quality, and productivity in the process industries. In particular, (i) the resilient design and control of chemical reactors, and (ii) the operation of complex processing systems, was investigated. Specific topics studied included new process modeling procedures, nonlinear controller designs, and control strategies for multiunit integrated processes. Both fundamental and immediately applicable results were obtained. The new design and operation results from this project were incorporated into computer-aided design software and disseminated to industry. The principles and design procedures have found their way into industrial practice.

  12. The Extraction of Gasoline from Natural Gas

    E-Print Network [OSTI]

    Schroeder, J. P.

    1914-05-15

    . A large number of teste were mcde on samples of gas containing gasoline vapor prepared as described on a previous page. The solvents for these tests were first saturated with the oity natural gas by bubbling it thru the solvent for a considerable...

  13. Eliminating MTBE in Gasoline in 2006

    Reports and Publications (EIA)

    2006-01-01

    A review of the market implications resulting from the rapid change from methyl tertiary butyl ether (MTBE) to ethanol-blended reformulated gasoline (RFG) on the East Coast and in Texas. Strains in ethanol supply and distribution will increase the potential for price volatility in these regions this summer.

  14. Conceptual design study FY 1981: synfuels from fusion - using the tandem mirror reactor and a thermochemical cycle to produce hydrogen

    SciTech Connect (OSTI)

    Krikorian, O.H. (ed.)

    1982-02-09

    This report represents the second year's effort of a scoping and conceptual design study being conducted for the express purpose of evaluating the engineering potential of producing hydrogen by thermochemical cycles using a tandem mirror fusion driver. The hydrogen thus produced may then be used as a feedstock to produce fuels such as methane, methanol, or gasoline. The main objective of this second year's study has been to obtain some approximate cost figures for hydrogen production through a conceptual design study.

  15. Conceptual design of a new homogeneous reactor for medical radioisotope Mo-99/Tc-99m production

    SciTech Connect (OSTI)

    Liem, Peng Hong [Nippon Advanced Information Service (NAIS Co., Inc.) Scientific Computational Division, 416 Muramatsu, Tokaimura, Ibaraki (Japan); Tran, Hoai Nam [Chalmers University of Technology, Dept. of Applied Physics, Div. of Nuclear Engineering, SE-412 96 Gothenburg (Sweden); Sembiring, Tagor Malem [National Nuclear Energy Agency (BATAN), Center for Reactor Technology and Nuclear Safety, Kawasan Puspiptek, Serpong, Tangerang Selatan, Banten (Indonesia); Arbie, Bakri [PT MOTAB Technology, Kedoya Elok Plaza Blok DA 12, Jl. Panjang, Kebun Jeruk, Jakarta Barat (Indonesia)

    2014-09-30

    To partly solve the global and regional shortages of Mo-99 supply, a conceptual design of a nitrate-fuel-solution based homogeneous reactor dedicated for Mo-99/Tc-99m medical radioisotope production is proposed. The modified LEU Cintichem process for Mo-99 extraction which has been licensed and demonstrated commercially for decades by BATAN is taken into account as a key design consideration. The design characteristics and main parameters are identified and the advantageous aspects are shown by comparing with the BATAN's existing Mo-99 supply chain which uses a heterogeneous reactor (RSG GAS multipurpose reactor)

  16. The design and testing of subsea production equipment: Current practice and potential for the future

    SciTech Connect (OSTI)

    Cort, A.J.C.; Ford, J.T.

    1995-12-31

    This paper presents an analysis of the current approach to the design and testing of equipment used in subsea developments. The paper critically assesses the current equipment specification, design, manufacture and testing process. An essential part of the analysis is a review of the standards used by the industry and statutory regulations which impact on this process. It raises significant questions about the efficacy of the design and testing procedures and the role of the regulating bodies in that process. It discusses the impact of poor specification and design procedures, and inadequate testing, of the safety and reliability of the equipment. As a consequence of the analysis it is suggested that the manner in which equipment is specified, designed and tested may need to be changed in order to meet future needs. The above issues are focused, by considering the production of a subsea wellhead, from specification by the operator to delivery by the manufacturer.

  17. Bioventing approach to remediate a gasoline contaminated subsurface. Book chapter

    SciTech Connect (OSTI)

    Kampbell, D.H.; Wilson, J.T.; Griffin, C.J.

    1992-01-01

    Bioventing is a subsurface process using an air stream to enhance biodegradation of oily contaminants. Two pilot-scale bioventing systems were installed at a field site. Process operations began in October 1990. The field site is located at an air station. A spill in 1969 of about 100,000 kilograms aviation gasoline was caused by a broken underground transfer line. A major portion of the spilled product still persists as an oily-phase residue in a 80x360 meter plume. The subsurface is a uniform beach sand with the ground water level near five meters. Prior to startup of the venting systems, a grass cover was established and a nutrient solution was dispersed throughout the unsaturated subsurface. Subsurface air flow patterns are being determined with a tracer gas of sulfur hexafloride. Soil gas, core material, and underground water are being monitored to determine the extent of remediation. Objectives of the study are to demonstrate that surface emissions of gasoline are minimal, oily residue will be reduced to <100 mg fuel carbon/Kg core material, and the process will be applicable to full-scale remediation. Flow rate is based on a calculated residence time of 24 hours. Surface emission of fuel hydrocarbons have not exceeded 1 micrograms/liter soil gas.

  18. From Waste to Hydrogen: An Optimal Design of Energy Production and Distribution Network

    E-Print Network [OSTI]

    Fan, Yueyue

    , and oil dependence will largely depend on the success of producing clean energy from renewable resources of producing clean energy from renewable resources. This paper focuses on the optimal design of the production. In most cases, renewable resources are more dispersed than the fossil energy resources they replace

  19. Submitted to The First World Congress on Integrated Design and Process Technology Integrated Production Systems for

    E-Print Network [OSTI]

    Foss, Bjarne A.

    and petrochemical plants, oil-processing plants including re neries, pulp and paper plants, metallurgical plantsSubmitted to The First World Congress on Integrated Design and Process Technology Integrated Production Systems for The Process Industries yBjarne A. Foss 1, zRoger Klev, zMorten Levin, xKristian Lien y

  20. On the Identification of Agents in the Design of Production Control Systems

    E-Print Network [OSTI]

    Woolridge, Mike

    possible scenarios and changes that the system will encounter: agents automatically adapt to changing production processes (such as engine assembly or car painting) will still require a major engineering effort. Such an engineering effort has to move agents out of the laboratory and into the planning teams designing

  1. Molten carbonate fuel cell product design and improvement. Quarterly report, December 1994--March 1995

    SciTech Connect (OSTI)

    1995-08-01

    Primary objective is to establish the commercial readiness of MW- class IMHEX {reg_sign} MCFC power plants for distributed generation, cogeneration, and compressor station applications. The following tasks are reported: product definition/planning, system design/analysis, manufacturing process development, packaging/assembly, test facilities, and technology development/improvement/verification.

  2. V-Miner: Using Enhanced Parallel Coordinates to Mine Product Design and Test Data 1

    E-Print Network [OSTI]

    Illinois at Chicago, University of

    V-Miner: Using Enhanced Parallel Coordinates to Mine Product Design and Test Data 1 Kaidi Zhao patterns can be easily detected visually. The Visual Miner (V-Miner) software includes both automated or data mining. This paper begins with an introduction to the proposed techniques and the V-Miner system

  3. Designing an on-line multimedia maintenance manual for a production environment

    E-Print Network [OSTI]

    Brinkman, Willem-Paul

    - would better express the complex spatial and dynamic operations on hardware. Finally, maintenance36 Designing an on-line multimedia maintenance manual for a production environment W.P. Brinkman, V.P. Buil, R. Cullen1 , R. Gobits2 and F.L. van Nes e-mail: w.p.brinkman@tue.nl Abstract Maintenance

  4. Systematic Design of Modular Products at Telemechanique Daniel E. Whitney, Liaison Scientist, Manufacturing

    E-Print Network [OSTI]

    Whitney, Daniel

    , Manufacturing Summary Telemechanique designs, builds, sells, and uses internally a wide variety of automation business of providing computer- integrated manufacturing systems. They are generally highly engineered as well as the focus of my visit. Because the products it sells are used in automation systems that make

  5. Estimate product quality with ANNs

    SciTech Connect (OSTI)

    Brambilla, A. [Univ. of Pisa (Italy); Trivella, F. [Adicon Advanced Distillation Control SrL, Pisa (Italy)

    1996-09-01

    Artificial neural networks (ANNs) have been applied to predict catalytic reformer octane number (ON) and gasoline splitter product qualities. Results show that ANNs are a valuable tool to derive fast and accurate product quality measurements, and offer a low-cost alternative to online analyzers or rigorous mathematical models. The paper describes product quality measurements, artificial neural networks, ANN structure, estimating gasoline octane numbers, and estimating naphtha splitter product qualities.

  6. Approaches for identifying consumer preferences for the design of technology products : a case study of residential solar panels

    E-Print Network [OSTI]

    Chen, Heidi Qianyi

    2012-01-01

    This thesis investigates ways to obtain consumer preferences for technology products to help designers identify the key attributes that contribute to a product's market success. A case study of residential solar PV panels ...

  7. Approaches for Identifying Consumer Preferences for the Design of Technology Products: A Case Study of Residential Solar Panels

    E-Print Network [OSTI]

    Chen, Heidi Qianyi

    This paper investigates ways to obtain consumer preferences for technology products to help designers identify the key attributes that contribute to a product's market success. A case study of residential photovoltaic ...

  8. Abstract--The quality of the decisions during the design phase of a product development process is strongly

    E-Print Network [OSTI]

    Aristomenis, Antoniadis

    is strongly connected with the assessment of the product, process and organizational innovation dimensions a product innovation profile through an innovation survey. An Innovation Design Structure Matrix Tool (I is defined. Next the product innovation profile is mapped with the product development activities, in order

  9. Approved Module Information for ME3047, 2014/5 Module Title/Name: Product Design Final Year Project Module Code: ME3047

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    Approved Module Information for ME3047, 2014/5 Module Title/Name: Product Design Final Year Project Product Design. BSc Transport Product Design. BSc Product Design and Management. Available to Exchange the student should have ability in:- * Enable flexibility in approach using creativity and innovation

  10. Direct production of fractionated and upgraded hydrocarbon fuels from biomass

    DOE Patents [OSTI]

    Felix, Larry G.; Linck, Martin B.; Marker, Terry L.; Roberts, Michael J.

    2014-08-26

    Multistage processing of biomass to produce at least two separate fungible fuel streams, one dominated by gasoline boiling-point range liquids and the other by diesel boiling-point range liquids. The processing involves hydrotreating the biomass to produce a hydrotreatment product including a deoxygenated hydrocarbon product of gasoline and diesel boiling materials, followed by separating each of the gasoline and diesel boiling materials from the hydrotreatment product and each other.

  11. Designer organisms for photosynthetic production of ethanol from carbon dioxide and water

    DOE Patents [OSTI]

    Lee, James Weifu (Knoxville, TN)

    2011-07-05

    The present invention provides a revolutionary photosynthetic ethanol production technology based on designer transgenic plants, algae, or plant cells. The designer plants, designer algae, and designer plant cells are created such that the endogenous photosynthesis regulation mechanism is tamed, and the reducing power (NADPH) and energy (ATP) acquired from the photosynthetic water splitting and proton gradient-coupled electron transport process are used for immediate synthesis of ethanol (CH.sub.3CH.sub.2OH) directly from carbon dioxide (CO.sub.2) and water (H.sub.2O). The ethanol production methods of the present invention completely eliminate the problem of recalcitrant lignocellulosics by bypassing the bottleneck problem of the biomass technology. The photosynthetic ethanol-production technology of the present invention is expected to have a much higher solar-to-ethanol energy-conversion efficiency than the current technology and could also help protect the Earth's environment from the dangerous accumulation of CO.sub.2 in the atmosphere.

  12. New Vehicle Choice, Fuel Economy and Vehicle Incentives: An Analysis of Hybrid Tax Credits and the Gasoline Tax

    E-Print Network [OSTI]

    Martin, Elliott William

    2009-01-01

    Run Price Elasticity of Gasoline Demand', The Energy Journal2007) The Link Between Gasoline Prices and Vehicle Sales:Tax Credits and the Gasoline Tax Elliot William Martin

  13. New Vehicle Choices, Fuel Economy and Vehicle Incentives: An Analysis of Hybrid Tax Credits and Gasoline Tax

    E-Print Network [OSTI]

    Martin, Elliot William

    2009-01-01

    Run Price Elasticity of Gasoline Demand', The Energy Journal2007) The Link Between Gasoline Prices and Vehicle Sales:Tax Credits and the Gasoline Tax Elliot William Martin

  14. Applications of contaminant fate and bioaccumulation models in assessing ecological risks of chemicals: A case study for gasoline hydrocarbons

    E-Print Network [OSTI]

    MacLeod, Matthew; McKone, Thomas E.; Foster, Karen L.; Maddalena, Randy L.; Parkerton, Thomas F.; Mackay, Don

    2004-01-01

    the composition of the gasoline inventory, and can beand exposure assessment for gasoline; Trent University:of Chemicals: A Case Study for Gasoline Hydrocarbons Matthew

  15. Turn of the century refueling: A review of innovations in early gasoline refueling methods and analogies for hydrogen

    E-Print Network [OSTI]

    Melaina, Marc W

    2007-01-01

    NJ. Koenig, R. , 1984. Gasoline alley: service stations area parametric analysis of US gasoline station networks. Inof innovations in early gasoline refueling methods and

  16. Turn of the century refueling: A review of innovations in early gasoline refueling methods and analogies for hydrogen

    E-Print Network [OSTI]

    Melaina, Marc W

    2007-01-01

    from the Atlantic Gasoline Company. Smithsonian Institute (names in gasoline dispensing history, Bowser and Company,companies had started the shift from kerosene to gasoline as

  17. Detailed Kinetic Modeling of Gasoline Surrogate Mixtures

    SciTech Connect (OSTI)

    Mehl, M; Curran, H J; Pitz, W J; Westbrook, C K

    2009-03-09

    Real fuels are complex mixtures of thousands of hydrocarbon compounds including linear and branched paraffins, naphthenes, olefins and aromatics. It is generally agreed that their behavior can be effectively reproduced by simpler fuel surrogates containing a limited number of components. In this work, a recently revised version of the kinetic model by the authors is used to analyze the combustion behavior of several components relevant to gasoline surrogate formulation. Particular attention is devoted to linear and branched saturated hydrocarbons (PRF mixtures), olefins (1-hexene) and aromatics (toluene). Model predictions for pure components, binary mixtures and multi-component gasoline surrogates are compared with recent experimental information collected in rapid compression machine, shock tube and jet stirred reactors covering a wide range of conditions pertinent to internal combustion engines. Simulation results are discussed focusing attention on the mixing effects of the fuel components.

  18. Effect of Intake Air Filter Condition on Light-Duty Gasoline Vehicles

    SciTech Connect (OSTI)

    Thomas, John F; Huff, Shean P; West, Brian H; Norman, Kevin M

    2012-01-01

    Proper maintenance can help vehicles perform as designed, positively affecting fuel economy, emissions, and the overall drivability. This effort investigates the effect of one maintenance factor, intake air filter replacement, with primary focus on vehicle fuel economy, but also examining emissions and performance. Older studies, dealing with carbureted gasoline vehicles, have indicated that replacing a clogged or dirty air filter can improve vehicle fuel economy and conversely that a dirty air filter can be significantly detrimental to fuel economy. The effect of clogged air filters on the fuel economy, acceleration and emissions of five gasoline fueled vehicles is examined. Four of these were modern vehicles, featuring closed-loop control and ranging in model year from 2003 to 2007. Three vehicles were powered by naturally aspirated, port fuel injection (PFI) engines of differing size and cylinder configuration: an inline 4, a V6 and a V8. A turbocharged inline 4-cylinder gasoline direct injection (GDI) engine powered vehicle was the fourth modern gasoline vehicle tested. A vintage 1972 vehicle equipped with a carburetor (open-loop control) was also examined. Results reveal insignificant fuel economy and emissions sensitivity of modern vehicles to air filter condition, but measureable effects on the 1972 vehicle. All vehicles experienced a measured acceleration performance penalty with clogged intake air filters.

  19. Reformulated gasoline deal with Venezuela draws heat

    SciTech Connect (OSTI)

    Begley, R.

    1994-04-06

    A fight is brewing in Congress over a deal to let Venezuela off the hook in complying with the Clean Air Act reformulated gasoline rule. When Venezuela threatened to call for a GATT panel to challenge the rule as a trade barrier, the Clinton Administration negotiated to alter the rule, a deal that members of Congress are characterizing as {open_quotes}secret{close_quotes} and {open_quotes}back door.{close_quotes}

  20. Reformulated Gasoline Foreign Refinery Rules

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a.CORPORATIONReformulated

  1. MTBE, Oxygenates, and Motor Gasoline

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverseIMPACTThousandReport) | SciTechAdministrationMTBE Production Economics

  2. European Lean Gasoline Direct Injection Vehicle Benchmark

    SciTech Connect (OSTI)

    Chambon, Paul H; Huff, Shean P; Edwards, Kevin Dean; Norman, Kevin M; Prikhodko, Vitaly Y; Thomas, John F

    2011-01-01

    Lean Gasoline Direct Injection (LGDI) combustion is a promising technical path for achieving significant improvements in fuel efficiency while meeting future emissions requirements. Though Stoichiometric Gasoline Direct Injection (SGDI) technology is commercially available in a few vehicles on the American market, LGDI vehicles are not, but can be found in Europe. Oak Ridge National Laboratory (ORNL) obtained a European BMW 1-series fitted with a 2.0l LGDI engine. The vehicle was instrumented and commissioned on a chassis dynamometer. The engine and after-treatment performance and emissions were characterized over US drive cycles (Federal Test Procedure (FTP), the Highway Fuel Economy Test (HFET), and US06 Supplemental Federal Test Procedure (US06)) and steady state mappings. The vehicle micro hybrid features (engine stop-start and intelligent alternator) were benchmarked as well during the course of that study. The data was analyzed to quantify the benefits and drawbacks of the lean gasoline direct injection and micro hybrid technologies from a fuel economy and emissions perspectives with respect to the US market. Additionally that data will be formatted to develop, substantiate, and exercise vehicle simulations with conventional and advanced powertrains.

  3. Target Cascading for Design of Product Families Ryan Fellini, Hyung Min Kim, Michael Kokkolaras, Nestor Michelena, and Panos Papalambros

    E-Print Network [OSTI]

    Papalambros, Panos

    with predefined platforms. The single-product formulation is modified to accommodate the presence of shared are identi- fied based on the shared elements (i.e., the platform). The solution of the overall design of the product variants. A simple automotive design example is used to demonstrate the proposed methodology

  4. Analysis of Reference Design for Nuclear-Assisted Hydrogen Production at 750°C Reactor Outlet Temperature

    SciTech Connect (OSTI)

    Michael G. McKellar; Edwin A. Harvego

    2010-05-01

    The use of High Temperature Electrolysis (HTE) for the efficient production of hydrogen without the greenhouse gas emissions associated with conventional fossil-fuel hydrogen production techniques has been under investigation at the Idaho National Engineering Laboratory (INL) for the last several years. The activities at the INL have included the development, testing and analysis of large numbers of solid oxide electrolysis cells, and the analyses of potential plant designs for large scale production of hydrogen using a high-temperature gas-cooled reactor (HTGR) to provide the process heat and electricity to drive the electrolysis process. The results of this research led to the selection in 2009 of HTE as the preferred concept in the U.S. Department of Energy (DOE) hydrogen technology down-selection process. However, the down-selection process, along with continued technical assessments at the INL, has resulted in a number of proposed modifications and refinements to improve the original INL reference HTE design. These modifications include changes in plant configuration, operating conditions and individual component designs. This report describes the resulting new INL reference design coupled to two alternative HTGR power conversion systems, a Steam Rankine Cycle and a Combined Cycle (a Helium Brayton Cycle with a Steam Rankine Bottoming Cycle). Results of system analyses performed to optimize the design and to determine required plant performance and operating conditions when coupled to the two different power cycles are also presented. A 600 MWt high temperature gas reactor coupled with a Rankine steam power cycle at a thermal efficiency of 44.4% can produce 1.85 kg/s of hydrogen and 14.6 kg/s of oxygen. The same capacity reactor coupled with a combined cycle at a thermal efficiency of 42.5% can produce 1.78 kg/s of hydrogen and 14.0 kg/s of oxygen.

  5. Design, fabrication, and integration testing of the Garden Banks 388 subsea production template

    SciTech Connect (OSTI)

    Ledbetter, W.R.; Smith, D.W.; Pierce, D.M.; Padilla, J.R.

    1995-12-31

    Enserch Exploration`s Garden Banks 388 development has a production scheme based around a floating drilling and production facility and subsea drilling/production template. The Floating Production Facility (FPF) is a converted semisubmersible drilling rig that will drill and produce through a 24-well slot subsea template. This development is located in Block 388 of the Garden Banks area in the Gulf of Mexico approximately 200 miles southwest of New Orleans, Louisiana. The production system is being installed in an area of known oil and gas reserves and will produce to a shallow water platform 54 miles away at Eugene Island 315. The FPF will be permanently moored above the template. The subsea template has been installed in 2190 feet of water and will produce through a 2,000 foot free-standing production riser system to the FPF. The produced fluids are partially separated on the FPF before oil and gas are pumped through the template to export gathering lines that are connected to the shallow water facility. The system designed through-put is 40,000 BOPD of oil and 120 MMSCFD of gas.

  6. Heating, Ventilation, and Air Conditioning Design Strategy for a Hot-Humid Production Builder

    SciTech Connect (OSTI)

    Kerrigan, P.

    2014-03-01

    Building Science Corporation (BSC) worked directly with the David Weekley Homes - Houston division to develop a cost-effective design for moving the HVAC system into conditioned space. In addition, BSC conducted energy analysis to calculate the most economical strategy for increasing the energy performance of future production houses in preparation for the upcoming code changes in 2015. This research project addressed the following questions: 1. What is the most cost effective, best performing and most easily replicable method of locating ducts inside conditioned space for a hot-humid production home builder that constructs one and two story single family detached residences? 2. What is a cost effective and practical method of achieving 50% source energy savings vs. the 2006 International Energy Conservation Code for a hot-humid production builder? 3. How accurate are the pre-construction whole house cost estimates compared to confirmed post construction actual cost?

  7. Design Editorial Design Innovation

    E-Print Network [OSTI]

    Papalambros, Panos

    juxtaposition of innovation versus invention: "Invention is the first occurrence of an idea for a new product such as innovation strategies, product design, service inno- vation, cutting-edge designers, design awards, and green design. Much of that perspective on innovation is then tied to industrial or product design, often

  8. Fact #890: September 14, 2015 Gasoline Prices Are Affected by...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    in refinery output resulted in tight supplies on the West Coast. In addition, few refineries outside of California are equipped to produce the gasoline formulation that can be...

  9. DOE's Gasoline/Diesel PM Split Study | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 Diesel Engine Emissions Reduction (DEER) Conference Presentations and Posters 2005deerfujita.pdf More Documents & Publications DOE's GasolineDiesel PM Split Study DOE's...

  10. Carbonyl Emissions from Gasoline and Diesel Motor Vehicles

    E-Print Network [OSTI]

    Jakober, Chris A.

    2008-01-01

    emissions from gasoline and diesel motor vehicles. Environ.of four dilutions of diesel engine exhaust for a subchronicautomobiles and heavy-duty diesel trucks. Environ. Sci.

  11. Table 34. Reformulated Motor Gasoline Prices by Grade, Sales...

    U.S. Energy Information Administration (EIA) Indexed Site

    Information AdministrationPetroleum Marketing Annual 1998 Table 34. Reformulated Motor Gasoline Prices by Grade, Sales Type, PAD District, and Selected States (Cents per...

  12. Table 48. Prime Supplier Sales Volumes of Motor Gasoline by...

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    Petroleum Marketing Annual 1998 Table 48. Prime Supplier Sales Volumes of Motor Gasoline by Grade, Formulation, PAD District, and State (Thousand Gallons per Day) -...

  13. Table 32. Conventional Motor Gasoline Prices by Grade, Sales...

    U.S. Energy Information Administration (EIA) Indexed Site

    Information AdministrationPetroleum Marketing Annual 1998 Table 32. Conventional Motor Gasoline Prices by Grade, Sales Type, PAD District, and State (Cents per Gallon...

  14. Table 44. Refiner Motor Gasoline Volumes by Formulation, Sales...

    U.S. Energy Information Administration (EIA) Indexed Site

    250 Energy Information AdministrationPetroleum Marketing Annual 1998 Table 44. Refiner Motor Gasoline Volumes by Formulation, Sales Type, PAD District, and State (Thousand Gallons...

  15. Table 34. Reformulated Motor Gasoline Prices by Grade, Sales...

    Gasoline and Diesel Fuel Update (EIA)

    Information AdministrationPetroleum Marketing Annual 1999 Table 34. Reformulated Motor Gasoline Prices by Grade, Sales Type, PAD District, and Selected States (Cents per...

  16. Lean Gasoline System Development for Fuel Efficient Small Car...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Vehicle Technologies Program Annual Merit Review and Peer Evaluation ace063smith2011o.pdf More Documents & Publications Lean Gasoline System Development for Fuel...

  17. 3-Cylinder Turbocharged Gasoline Direct Injection: A High Value...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    High Value Solution for Euro VI Emissions 3-cylindery gasoline direct injection engines offer similar value in CO2 reduction capability (Euros% CO2 reduction) at a significantly...

  18. Gasoline Ultra Fuel Efficient Vehicle Program Update | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Vehicle Program Update Gasoline Ultra Fuel Efficient Vehicle Program Update Discusses hardware and system development activities to achieve in-vehicle fuel economy and emissions...

  19. Energy Department Announces First Regional Gasoline Reserve to...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    reserve right here in New York Harbor." "Like sandbags and stockpiles of food and medicine, this gasoline reserve is what the Northeast needs to be ready for supercharged...

  20. Table 32. Conventional Motor Gasoline Prices by Grade, Sales...

    U.S. Energy Information Administration (EIA) Indexed Site

    AdministrationPetroleum Marketing Annual 1998 Table 32. Conventional Motor Gasoline Prices by Grade, Sales Type, PAD District, and State (Cents per Gallon Excluding Taxes) -...

  1. Enabling and Expanding HCCI in PFI Gasoline Engines with High...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Vehicle Technologies Office Merit Review 2015: High-Dilution Stoichiometric Gasoline Direct-Injection (SGDI) Combustion Control Development Enabling the Next Generation of...

  2. Geographic Area Month Aviation Gasoline Kerosene-Type Jet Fuel

    Gasoline and Diesel Fuel Update (EIA)

    Excluding Taxes) - Continued Geographic Area Month Aviation Gasoline Kerosene-Type Jet Fuel Kerosene Sales to End Users Sales for Resale Sales to End Users Sales for Resale...

  3. Reducing the Particulate Emission Numbers in DI Gasoline Engines...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Emission Numbers in DI Gasoline Engines Formation of droplets was minimized through optimization of fuel vaporization and distribution avoiding airfuel zones richer than...

  4. Table 35. Refiner Motor Gasoline Prices by Grade, Sales Type...

    U.S. Energy Information Administration (EIA) Indexed Site

    of table. 134 Energy Information AdministrationPetroleum Marketing Annual 1999 Table 35. Refiner Motor Gasoline Prices by Grade, Sales Type, PAD District, and State (Cents per...

  5. Impacts of Oxygenated Gasoline Use on California Light-Duty Vehicle Emissions

    E-Print Network [OSTI]

    Kirchstetter, Thomas W.; Singer, Brett C.; Harley, Robert A.

    1996-01-01

    Addition of oxTgenates gasoline will not reduce ozone to (3)I. Y. remote sensing 1994 gasoline samples ranged from 0.7weight reported for liquid gasoline with an RVP Assoc. 1990,

  6. Asymmetric Price Adjustment and Consumer Search: An Examination of the Retail Gasoline Market

    E-Print Network [OSTI]

    Lewis, Matt

    2003-01-01

    Adjustment of U.K. Retail Gasoline Prices to Cost Changes. ”C. and R. Gilbert (1997) “Do Gasoline Prices Respond Asym-Asymmetries in Local Gasoline Markets” Energy Economics

  7. Factors Affecting Indoor Air Concentrations of Volatile Organic Compounds at a Site of Subsurface Gasoline Contamination

    E-Print Network [OSTI]

    Fischer, M.L.

    2011-01-01

    AT A SITE OF SUBSURFACE GASOLINE CONTAMINATION Marc L.A T A SITE OF SUBSURFACE GASOLINE CONTAMINATION Marc L.a site contaminated with gasoline. Although the high V O C

  8. Electric and Gasoline Vehicle Lifecycle Cost and Energy-Use Model

    E-Print Network [OSTI]

    Delucchi, Mark; Burke, Andy; Lipman, Timothy; Miller, Marshall

    2000-01-01

    147 Lifecycle cost (break-even gasoline price): base-casegrease. 37B part: Fuel Gasoline, for the conventional ICEVs.BTU-from-battery to mi/BTU-gasoline. C OST SUMMARY (F ORD T

  9. Asymmetric Price Adjustment and Consumer Search: An Examination of the Retail Gasoline Industry

    E-Print Network [OSTI]

    Lewis, Matt

    2003-01-01

    Adjustment of U.K. Retail Gasoline Prices to Cost Changes. ”C. and R. Gilbert (1997) “Do Gasoline Prices Respond Asym-Asymmetries in Local Gasoline Markets” Energy Economics

  10. Asymmetric Price Adjustment and Consumer Search: An Examination of the Retail Gasoline Market

    E-Print Network [OSTI]

    Lewis, Matt

    2004-01-01

    stations sell gasoline under a parent company’s brand name.to buy gasoline from their parent company. The parentRe?ning companies heavily advertise that the gasoline sold

  11. Asymmetric Price Adjustment and Consumer Search: An Examination of the Retail Gasoline Market

    E-Print Network [OSTI]

    Lewis, Matt

    2003-01-01

    stations sell gasoline under a parent company’s brand name.to buy gasoline from their parent company. The parentReŢning companies heavily advertise that the gasoline sold

  12. The Speed of Gasoline Price Response in Markets With and Without Edgeworth Cycles

    E-Print Network [OSTI]

    Lewis, Matt; Noel, Michael

    2009-01-01

    true cost of gasoline because re?ning companies manipulatebranded gasoline sold by large re?ning companies to theirbranded” gasoline of a major re?ning company such as BP,

  13. Asymmetric Price Adjustment and Consumer Search: An Examination of the Retail Gasoline Industry

    E-Print Network [OSTI]

    Lewis, Matt

    2003-01-01

    stations sell gasoline under a parent company’s brand name.to buy gasoline from their parent company. The parentReŢning companies heavily advertise that the gasoline sold

  14. Chemical kinetic modeling of component mixtures relevant to gasoline

    SciTech Connect (OSTI)

    Mehl, M; Curran, H J; Pitz, W J; Dooley, S; Westbrook, C K

    2008-05-29

    Detailed kinetic models of pyrolysis and combustion of hydrocarbon fuels are nowadays widely used in the design of internal combustion engines and these models are effectively applied to help meet the increasingly stringent environmental and energetic standards. In previous studies by the combustion community, such models not only contributed to the understanding of pure component combustion, but also provided a deeper insight into the combustion behavior of complex mixtures. One of the major challenges in this field is now the definition and the development of appropriate surrogate models able to mimic the actual features of real fuels. Real fuels are complex mixtures of thousands of hydrocarbon compounds including linear and branched paraffins, naphthenes, olefins and aromatics. Their behavior can be effectively reproduced by simpler fuel surrogates containing a limited number of components. Aside the most commonly used surrogates containing iso-octane and n-heptane only, the so called Primary Reference Fuels (PRF), new mixtures have recently been suggested to extend the reference components in surrogate mixtures to also include alkenes and aromatics. It is generally agreed that, including representative species for all the main classes of hydrocarbons which can be found in real fuels, it is possible to reproduce very effectively in a wide range of operating conditions not just the auto-ignition propensity of gasoline or Diesel fuels, but also their physical properties and their combustion residuals [1]. In this work, the combustion behavior of several components relevant to gasoline surrogate formulation is computationally examined. The attention is focused on the autoignition of iso-octane, hexene and their mixtures. Some important issues relevant to the experimental and modeling investigation of such fuels are discussed with the help of rapid compression machine data and calculations. Following the model validation, the behavior of mixtures is discussed on the basis of computational results.

  15. Heating, Ventilation, and Air Conditioning Design Strategy for a Hot-Humid Production Builder

    SciTech Connect (OSTI)

    Kerrigan, P.

    2014-03-01

    BSC worked directly with the David Weekley Homes - Houston division to redesign three floor plans in order to locate the HVAC system in conditioned space. The purpose of this project is to develop a cost effective design for moving the HVAC system into conditioned space. In addition, BSC conducted energy analysis to calculate the most economical strategy for increasing the energy performance of future production houses. This is in preparation for the upcoming code changes in 2015. The builder wishes to develop an upgrade package that will allow for a seamless transition to the new code mandate. The following research questions were addressed by this research project: 1. What is the most cost effective, best performing and most easily replicable method of locating ducts inside conditioned space for a hot-humid production home builder that constructs one and two story single family detached residences? 2. What is a cost effective and practical method of achieving 50% source energy savings vs. the 2006 International Energy Conservation Code for a hot-humid production builder? 3. How accurate are the pre-construction whole house cost estimates compared to confirmed post construction actual cost? BSC and the builder developed a duct design strategy that employs a system of dropped ceilings and attic coffers for moving the ductwork from the vented attic to conditioned space. The furnace has been moved to either a mechanical closet in the conditioned living space or a coffered space in the attic.

  16. HVAC Design Strategy for a Hot-Humid Production Builder, Houston, Texas (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2014-03-01

    BSC worked directly with the David Weekley Homes - Houston division to redesign three floor plans in order to locate the HVAC system in conditioned space. The purpose of this project is to develop a cost effective design for moving the HVAC system into conditioned space. In addition, BSC conducted energy analysis to calculate the most economical strategy for increasing the energy performance of future production houses. This is in preparation for the upcoming code changes in 2015. The builder wishes to develop an upgrade package that will allow for a seamless transition to the new code mandate. The following research questions were addressed by this research project: 1. What is the most cost effective, best performing and most easily replicable method of locating ducts inside conditioned space for a hot-humid production home builder that constructs one and two story single family detached residences? 2. What is a cost effective and practical method of achieving 50% source energy savings vs. the 2006 International Energy Conservation Code for a hot-humid production builder? 3. How accurate are the pre-construction whole house cost estimates compared to confirmed post construction actual cost? BSC and the builder developed a duct design strategy that employs a system of dropped ceilings and attic coffers for moving the ductwork from the vented attic to conditioned space. The furnace has been moved to either a mechanical closet in the conditioned living space or a coffered space in the attic.

  17. Clearing the Air? The Effects of Gasoline Content Regulation on Air Quality

    E-Print Network [OSTI]

    Auffhammer, Maximilian; Kellogg, Ryan

    2009-01-01

    components—particularly butane—in the gasoline they sell (times more reactive than butane, the compound that refinersprimarily by removing the VOC butane from their gasoline, as

  18. Fact #824: June 9, 2014 EPA Sulfur Standards for Gasoline | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for Gasoline Sulfur naturally occurs in gasoline and diesel fuel, contributing to pollution when the fuel is burned. Beginning in 2004, standards were set on the amount of...

  19. Factors Affecting Indoor Air Concentrations of Volatile Organic Compounds at a Site of Subsurface Gasoline Contamination

    E-Print Network [OSTI]

    Fischer, M.L.

    2011-01-01

    OF SUBSURFACE GASOLINE CONTAMINATION Marc L. Fischer, AbraOF SUBSURFACE GASOLINE CONTAMINATION Marc L. Fischer, Abrareporting indoor air contamination (6,7). Estimation of

  20. A Comparison of Two Gasoline and Two Diesel Cars with Varying...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    A Comparison of Two Gasoline and Two Diesel Cars with Varying Emission Control Technologies A Comparison of Two Gasoline and Two Diesel Cars with Varying Emission Control...

  1. Edgeworth Price Cycles, Cost-based Pricing and Sticky Pricing in Retail Gasoline Markets

    E-Print Network [OSTI]

    Noel, Michael

    2004-01-01

    Dynamic Pricing in Retail gasoline Markets”, RAND Journal ofin the Canadian Retail Gasoline Market”, Energy Economics [Associates. “Canadian Retail Petroleum Markets Study”, Re-

  2. This Week In Petroleum Gasoline Section

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices Global Crude Oil PricesRegular gasoline retail prices

  3. EIA lowers forecast for summer gasoline prices

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry Natural GasNatural GasEIA lowers forecast for summer gasoline prices

  4. Gasoline prices continue to fall (long version)

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry Natural GasNatural GasEIA lowers 2015ValuesEFueluplonglongGasoline

  5. Gasoline prices continue to increase (short version)

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry Natural GasNatural GasEIA lowerslong version) TheGasoline prices

  6. Gasoline prices continue to increase (short version)

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry Natural GasNatural GasEIA lowerslong version) TheGasoline

  7. Gasoline prices continue to rise (Short version)

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry Natural GasNatural GasEIA lowerslong version) Gasoline prices

  8. Gasoline prices continue to rise (long version)

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry Natural GasNatural GasEIA lowerslong version) Gasoline

  9. Author's personal copy Gasoline prices and traffic safety in Mississippi

    E-Print Network [OSTI]

    Levinson, David M.

    more than 16% from 1973 to 1974 when the oil crisis occurred. International oil prices historically-grade unleaded gasoline price data from the Energy Information Administration of the U.S. Department of EnergyAuthor's personal copy Gasoline prices and traffic safety in Mississippi Guangqing Chi a, , Arthur

  10. Empirical Regularities of Asymmetric Pricing in the Gasoline Industry

    E-Print Network [OSTI]

    Niebur, Ernst

    characteristics correlate with the speed of cost to retail price pass-through. The driving and commuting behaviorEmpirical Regularities of Asymmetric Pricing in the Gasoline Industry Marc Remer August 2, 2010 pricing in the retail gasoline industry, and also documents empirical regularities in the market. I find

  11. Designing catalysts for hydrogen production | Center for Bio-Inspired Solar

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalent BondingMeeting |Design CompetitionsFuel Production catalysts

  12. Manufacture of aromatic hydrocarbons from coal hydrogenation products

    SciTech Connect (OSTI)

    A.S. Maloletnev; M.A. Gyul'malieva [Institute for Fossil Fuels, Moscow (Russian Federation)

    2007-08-15

    The manufacture of aromatic hydrocarbons from coal distillates was experimentally studied. A flow chart for the production of benzene, ethylbenzene, toluene, and xylenes was designed, which comprised the hydrogen treatment of the total wide-cut (or preliminarily dephenolized) fraction with FBP 425{sup o}C; fractional distillation of the hydrotreated products into IBP-60, 60-180, 180-300, and 300-425{sup o}C fractions; the hydro-cracking of middle fractions for increasing the yield of gasoline fractions whenever necessary; the catalytic reform of the fractions with bp up to 180{sup o}C; and the extraction of aromatic hydrocarbons.

  13. Lean Gasoline Engine Reductant Chemistry During Lean NOx Trap Regeneration

    SciTech Connect (OSTI)

    Choi, Jae-Soon; Prikhodko, Vitaly Y; Partridge Jr, William P; Parks, II, James E; Norman, Kevin M; Huff, Shean P; Chambon, Paul H; Thomas, John F

    2010-01-01

    Lean NOx Trap (LNT) catalysts can effectively reduce NOx from lean engine exhaust. Significant research for LNTs in diesel engine applications has been performed and has led to commercialization of the technology. For lean gasoline engine applications, advanced direct injection engines have led to a renewed interest in the potential for lean gasoline vehicles and, thereby, a renewed demand for lean NOx control. To understand the gasoline-based reductant chemistry during regeneration, a BMW lean gasoline vehicle has been studied on a chassis dynamometer. Exhaust samples were collected and analyzed for key reductant species such as H2, CO, NH3, and hydrocarbons during transient drive cycles. The relation of the reductant species to LNT performance will be discussed. Furthermore, the challenges of NOx storage in the lean gasoline application are reviewed.

  14. Effects of gasoline composition on exhaust emissions and driveability

    SciTech Connect (OSTI)

    Hoshi, H.; Nakada, M.; Kato, M.; Okada, M.; Kayanuma, N.

    1990-01-01

    A study of the effects of changes in gasoline composition is one area to explore in our effort to reduce tailpipe emissions from vehicles. However, affects on vehicle performances should also be considered from the perspective of practical useage. In this paper, the influence of gasoline composition (aromatics), volatility, and MTBE blending on engine outlet and tailpipe emissions are discussed in particular, focusing on distillation properties which have a close relationship to driveability. Under stable driving conditions and without a catalitic converter, the effects of gasoline volatility is small, while aromatics in gasoline affect exhaust HC and NO{sub x} emissions. MTBE has a leaning effect on the engine intake air/fuel mixture. During a transient driving cycle, a high gasoline 50% distillation temperature causes poor driveability, as a result, HC emissions increase.

  15. Strategic supply system design - a holistic evaluation of operational and production cost for a biorefinery supply chain: Strategic biorefinery feedstock supply system design

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Lamers, Patrick; Tan, Eric C.D.; Searcy, Erin M.; Scarlata, Christopher J.; Cafferty, Kara G.; Jacobson, Jacob J.

    2015-08-20

    Pioneer cellulosic biore? neries across the United States rely on a conventional feedstock sup-ply system based on one-year contracts with local growers, who harvest, locally store, and deliver feed-stock in low-density format to the conversion facility. While the conventional system is designed for high biomass yield areas, pilot scale operations have experienced feedstock supply shortages and price volatilities due to reduced harvests and competition from other industries. Regional supply depend-ency and the inability to actively manage feedstock stability and quality, provide operational risks to the biore? nery, which translate into higher investment risk. The advanced feedstock supply system based onmore »a network of depots can mitigate many of these risks and enable wider supply system bene? ts. This paper compares the two concepts from a system-level perspective beyond mere logistic costs. It shows that while processing operations at the depot increase feedstock supply costs initially, they enable wider system bene? ts including supply risk reduction (leading to lower interest rates on loans), industry scale-up, conversion yield improvements, and reduced handling equipment and storage costs at the biore? nery. When translating these bene? ts into cost reductions per liter of gasoline equivalent (LGE), we ? nd that total cost reductions between –$0.46 to –$0.21 per LGE for biochemical and –$0.32 to –$0.12 per LGE for thermochemical conversion pathways are possible. Naturally, these system level bene? ts will differ between individual actors along the feedstock supply chain. Further research is required with respect to depot sizing, location, and ownership structures.« less

  16. Dispensing Equipment Testing with Mid-Level Ethanol/Gasoline Test Fluid: Summary Report

    SciTech Connect (OSTI)

    Boyce, K.; Chapin, J. T.

    2010-11-01

    The National Renewable Energy Laboratory's (NREL) Nonpetroleum-Based Fuel Task addresses the hurdles to commercialization of biomass-derived fuels and fuel blends. One such hurdle is the unknown compatibility of new fuels with current infrastructure, such as the equipment used at service stations to dispense fuel into automobiles. The U.S. Department of Energy's (DOE) Vehicle Technology Program and the Biomass Program have engaged in a joint project to evaluate the potential for blending ethanol into gasoline at levels higher than nominal 10 volume percent. This project was established to help DOE and NREL better understand any potentially adverse impacts caused by a lack of knowledge about the compatibility of the dispensing equipment with ethanol blends higher than what the equipment was designed to dispense. This report provides data about the impact of introducing a gasoline with a higher volumetric ethanol content into service station dispensing equipment from a safety and a performance perspective.

  17. Some modifications to the design of a parabolic solar concentrator for construction in Lesotho and their effects on power production

    E-Print Network [OSTI]

    Ferreira, Toni (Toni Jolene)

    2005-01-01

    An experimental study was performed to test the effectiveness of design modifications terms of efficiency and power production in an existing parabolic solar concentrator. The proposed modifications included limiting the ...

  18. Dependency models as a basis for analyzing software product platform modularity : a case study in strategic software design rationalization

    E-Print Network [OSTI]

    LaMantia, Matthew J. (Matthew John)

    2006-01-01

    It is broadly accepted among software managers and architects that maintaining the integrity of software designs is important for the long-term health and viability of software product platforms. The use of modular, ...

  19. Robust design as a driver of engine cylinder heads evolution : a framework for identifying product improvement paths

    E-Print Network [OSTI]

    Gómez de la Mora, Luz de Lourdes

    2005-01-01

    The fundamental goal of Robust Design is to improve the quality of a product by minimizing the effects of variation. A key contributor to robustness over the long term is R&D. Therefore, a framework is desired to help ...

  20. MDP-8 Cairo University Conference Proceeding of MDP-8, Cairo University Conference on Mechanical Design and Production Cairo, Egypt, January 4-6, 2004

    E-Print Network [OSTI]

    Saitou, Kazuhiro "Kazu"

    Design and Production Cairo, Egypt, January 4-6, 2004 591 CRASHWORTHINESS DESIGN USING META and Production Cairo, Egypt, January 4-6, 2004 Hamza and Saitou 592 optimization, ii) parametric optimization

  1. Electric field induced needle-pulsed arc discharge carbon nanotube production apparatus: Circuitry and mechanical design

    SciTech Connect (OSTI)

    Kia, Kaveh Kazemi; Bonabi, Fahimeh

    2012-12-15

    A simple and low cost apparatus is reported to produce multiwall carbon nanotubes and carbon nano-onions by a low power short pulsed arc discharge reactor. The electric circuitry and the mechanical design details and a micro-filtering assembly are described. The pulsed-plasma is generated and applied between two graphite electrodes. The pulse width is 0.3 {mu}s. A strong dc electric field is established along side the electrodes. The repetitive discharges occur in less than 1 mm distance between a sharp tip graphite rod as anode, and a tubular graphite as cathode. A hydrocarbon vapor, as carbon source, is introduced through the graphite nozzle in the cathode assembly. The pressure of the chamber is controlled by a vacuum pump. A magnetic field, perpendicular to the plasma path, is provided. The results show that the synergetic use of a pulsed-current and a dc power supply enables us to synthesize carbon nanoparticles with short pulsed plasma. The simplicity and inexpensiveness of this plan is noticeable. Pulsed nature of plasma provides some extra degrees of freedom that make the production more controllable. Effects of some design parameters such as electric field, pulse frequency, and cathode shape are discussed. The products are examined using scanning probe microscopy techniques.

  2. From User-Centered to Adoption-Centered Design: A Case Study of an HCI Research Innovation Becoming a Product

    E-Print Network [OSTI]

    Wobbrock, Jacob O.

    endure attempted dissemination as a commercial product. Although the extent to which any innovation innovations develop into commercial products [11]. Given that research- ers usually lack the knowledgeFrom User-Centered to Adoption-Centered Design: A Case Study of an HCI Research Innovation Becoming

  3. 646 IEEE TRANSACTIONS ON ROBOTICS AND AUTOMATION, VOL. 13, NO. 5, OCTOBER 1997 Design of Assembly Systems for Modular Products

    E-Print Network [OSTI]

    Kusiak, Andrew

    systems. Given a family of modular products, designing low cost assembly systems is an important problem to the challenge of agile manufacturing, companies are striving to provide a large variety of products at a low problem of the assembly system is formulated and solved by a tabu search based algorithm. Index Terms

  4. A. Kusiak, Data Mining in Design of Products and Production Systems, Proceedings of INCOM'2006: 12th IFAC/IFIP/IFORS/IEEE Symposium on Control Problems in Manufacturing, May 2006, Saint-Etienne, France, Vol. 1, pp. 49-53.

    E-Print Network [OSTI]

    Kusiak, Andrew

    A. Kusiak, Data Mining in Design of Products and Production Systems, Proceedings of INCOM'2006: 12-Etienne, France, Vol. 1, pp. 49-53. 49 DATA MINING IN DESIGN OF PRODUCTS AND PRODUCTION SYSTEMS Andrew Kusiak://www.icaen.uiowa.edu/~ankusiak Abstract: As a new science, data mining is acquiring its own identity by refining the concepts from other

  5. Approved Module Information for CE1004, 2014/5 Module Title/Name: Process and Product Design Module Code: CE1004

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    . * Concept of scale * Product innovation - customer needs, ideas generation, ideas selection, productApproved Module Information for CE1004, 2014/5 Module Title/Name: Process and Product Design Module on a realistic project Product Design * To understand the difference between commodity and speciality chemicals

  6. Who is Exposed to Gas Prices? How Gasoline Prices Affect Automobile Manufacturers and Dealerships

    E-Print Network [OSTI]

    Rothman, Daniel

    Who is Exposed to Gas Prices? How Gasoline Prices Affect Automobile Manufacturers and Dealerships-busse@kellogg.northwestern.edu, knittel@mit.edu, f-zettelmeyer@kellogg.northwestern.edu #12;Who is Exposed to Gas Prices? How Gasoline of gasoline prices, and consumer responses to gasoline prices have been well studied. In this paper

  7. Gasoline: An adaptable implementation of TreeSPH

    E-Print Network [OSTI]

    Wadsley, J; Quinn, T; Wadsley, James; Stadel, Joachim; Quinn, Thomas

    2003-01-01

    The key algorithms and features of the Gasoline code for parallel hydrodynamics with self-gravity are described. Gasoline is an extension of the efficient Pkdgrav parallel N-body code using smoothed particle hydrodynamics. Accuracy measurements, performance analysis and tests of the code are presented. Recent successful Gasoline applications are summarized. These cover a diverse set of areas in astrophysics including galaxy clusters, galaxy formation and gas-giant planets. Future directions for gasdynamical simulations in astrophysics and code development strategies for tackling cutting edge problems are discussed.

  8. Gasoline: An adaptable implementation of TreeSPH

    E-Print Network [OSTI]

    James Wadsley; Joachim Stadel; Thomas Quinn

    2003-03-24

    The key algorithms and features of the Gasoline code for parallel hydrodynamics with self-gravity are described. Gasoline is an extension of the efficient Pkdgrav parallel N-body code using smoothed particle hydrodynamics. Accuracy measurements, performance analysis and tests of the code are presented. Recent successful Gasoline applications are summarized. These cover a diverse set of areas in astrophysics including galaxy clusters, galaxy formation and gas-giant planets. Future directions for gasdynamical simulations in astrophysics and code development strategies for tackling cutting edge problems are discussed.

  9. Advanced turbine systems program conceptual design and product development. Annual report, August 1994--July 1995

    SciTech Connect (OSTI)

    1995-11-01

    This report summarizes the tasks completed under this project during the period from August 1, 1994 through July 31, 1994. The objective of the study is to provide the conceptual design and product development plan for an ultra high efficiency, environmentally superior and cost-competitive industrial gas turbine system to be commercialized by the year 2000. The tasks completed include a market study for the advanced turbine system; definition of an optimized recuperated gas turbine as the prime mover meeting the requirements of the market study and whose characteristics were, in turn, used for forecasting the total advanced turbine system (ATS) future demand; development of a program plan for bringing the ATS to a state of readiness for field test; and demonstration of the primary surface recuperator ability to provide the high thermal effectiveness and low pressure loss required to support the proposed ATS cycle.

  10. The relation of octane number, compression ratio, and exhaust temperature in the gasoline engine 

    E-Print Network [OSTI]

    Jentsch, Donald George

    1951-01-01

    THE RELATION OF OCTANE NUMHER& COMPRESSION RATIO& AND EXHAUST TEMPERATURE IN THE GASOLINE ENGINE A Tbeaie Donald George Jentsch THE RELATION OF OCTANE NUMBER, COMHKSSION RATIO, EXHAUST TEMPERATURE IN THE GASOLINE ENGINE By Donald George... throttle settings) a. Table VI - Aviation Gasolines 22 26 b. Table VI (a) ? Automotive Gasolines . . . 33 2. Spark set for maximum power at full throttle (Speed 2000 RPH at various throttle settings) a. Table VII ? Aviation Gasolines . . . . . 34 b...

  11. Low-Cost Hydrogen Distributed Production System Development

    SciTech Connect (OSTI)

    C.E. Thomas, Ph.D., President Franklin D. Lomax, Ph.D, CTO & Principal Investigator, and Maxim Lyubovski, Ph.D.

    2011-03-10

    H{sub 2}Gen, with the support of the Department of Energy, successfully designed, built and field-tested two steam methane reformers with 578 kg/day capacity, which has now become a standard commercial product serving customers in the specialty metals and PV manufacturing businesses. We demonstrated that this reformer/PSA system, when combined with compression, storage and dispensing (CSD) equipment could produce hydrogen that is already cost-competitive with gasoline per mile driven in a conventional (non-hybrid) vehicle. We further showed that mass producing this 578 kg/day system in quantities of just 100 units would reduce hydrogen cost per mile approximately 13% below the cost of untaxed gasoline per mile used in a hybrid electric vehicle. If mass produced in quantities of 500 units, hydrogen cost per mile in a FCEV would be 20% below the cost of untaxed gasoline in an HEV in the 2015-2020 time period using EIA fuel cost projections for natural gas and untaxed gasoline, and 45% below the cost of untaxed gasoline in a conventional car. This 20% to 45% reduction in fuel cost per mile would accrue even though hydrogen from this 578 kg/day system would cost approximately $4.14/kg, well above the DOE hydrogen cost targets of $2.50/kg by 2010 and $2.00/kg by 2015. We also estimated the cost of a larger, 1,500 kg/day SMR/PSA fueling system based on engineering cost scaling factors derived from the two H{sub 2}Gen products, a commercial 115 kg/day system and the 578 kg/day system developed under this DOE contract. This proposed system could support 200 to 250 cars per day, similar to a medium gasoline station. We estimate that the cost per mile from this larger 1,500 kg/day hydrogen fueling system would be 26% to 40% below the cost per mile of untaxed gasoline in an HEV and ICV respectively, even without any mass production cost reductions. In quantities of 500 units, we are projecting per mile cost reductions between 45% (vs. HEVs) and 62% (vs ICVs), with hydrogen costing approximately $2.87/kg, still above the DOE's 2010 $2.50/kg target. We also began laboratory testing of reforming ethanol, which we showed is currently the least expensive approach to making renewable hydrogen. Extended testing of neat ethanol in micro-reactors was successful, and we also were able to reform E-85 acquired from a local fueling station for 2,700 hours, although some modifications were required to handle the 15% gasoline present in E-85. We began initial tests of a catalyst-coated wall reformer tube that showed some promise in reducing the propensity to coke with E-85. These coated-wall tests ran for 350 hours. Additional resources would be required to commercialize an ethanol reformer operating on E-85, but there is no market for such a product at this time, so this ethanol reformer project was moth-balled pending future government or industry support. The two main objectives of this project were: (1) to design, build and test a steam methane reformer and pressure swing adsorption system that, if scaled up and mass produced, could potentially meet the DOE 2015 cost and efficiency targets for on-site distributed hydrogen generation, and (2) to demonstrate the efficacy of a low-cost renewable hydrogen generation system based on reforming ethanol to hydrogen at the fueling station.

  12. Strategic supply system design - a holistic evaluation of operational and production cost for a biorefinery supply chain

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Lamers, Patrick; Tan, Eric C.D.; Searcy, Erin M.; Scarlata, Christopher J.; Cafferty, Kara G.; Jacobson, Jacob J.

    2015-08-20

    Pioneer cellulosic biorefineries across the United States rely on a conventional feedstock supply system based on one-year contracts with local growers, who harvest, locally store, and deliver feed-stock in low-density format to the conversion facility. While the conventional system is designed for high biomass yield areas, pilot scale operations have experienced feedstock supply shortages and price volatilities due to reduced harvests and competition from other industries. Regional supply dependency and the inability to actively manage feedstock stability and quality, provide operational risks to the biorefinery, which translate into higher investment risk. The advanced feedstock supply system based on a networkmore »of depots can mitigate many of these risks and enable wider supply system benefits. This paper compares the two concepts from a system-level perspective beyond mere logistic costs. It shows that while processing operations at the depot increase feedstock supply costs initially, they enable wider system benefits including supply risk reduction (leading to lower interest rates on loans), industry scale-up, conversion yield improvements, and reduced handling equipment and storage costs at the biorefinery. When translating these benefits into cost reductions per liter of gasoline equivalent (LGE), we find that total cost reductions between -$0.46 to -$0.21 per LGE for biochemical and -$0.32 to -$0.12 per LGE for thermochemical conversion pathways are possible. Naturally, these system level benefits will differ between individual actors along the feedstock supply chain. Further research is required with respect to depot sizing, location, and ownership structures.« less

  13. Demand and Price Volatility: Rational Habits in International Gasoline Demand

    E-Print Network [OSTI]

    Scott, K. Rebecca

    2011-01-01

    A Joint Model of the Global Crude Oil Market and the U.S.Noureddine. 2002. World crude oil and natural gas: a demandelasticity of demand for crude oil, not gasoline. Results

  14. Demand and Price Uncertainty: Rational Habits in International Gasoline Demand

    E-Print Network [OSTI]

    Scott, K. Rebecca

    2013-01-01

    World crude oil and natural gas: a demand and supply model.analysis of the demand for oil in the Middle East. EnergyEstimates elasticity of demand for crude oil, not gasoline.

  15. Demand and Price Volatility: Rational Habits in International Gasoline Demand

    E-Print Network [OSTI]

    Scott, K. Rebecca

    2011-01-01

    World crude oil and natural gas: a demand and supply model.analysis of the demand for oil in the Middle East. EnergyEstimates elasticity of demand for crude oil, not gasoline.

  16. High compression ratio turbo gasoline engine operation using alcohol enhancement

    E-Print Network [OSTI]

    Lewis, Raymond (Raymond A.)

    2013-01-01

    Gasoline - ethanol blends were explored as a strategy to mitigate engine knock, a phenomena in spark ignition engine combustion when a portion of the end gas is compressed to the point of spontaneous auto-ignition. This ...

  17. Fact #639: September 6, 2010 Gasoline Tax Rates by State

    Broader source: Energy.gov [DOE]

    The Federal Excise Tax on motor gasoline is 18.4 cents per gallon for all states. Each state applies additional taxes which vary from state to state. As of July 2010, Alaska had the lowest overall...

  18. Energy Department Announces First Regional Gasoline Reserve to...

    Energy Savers [EERE]

    said Senator Edward J. Markey. "This gasoline reserve will ensure that just because a dangerous storm soaks our region, it doesn't mean that consumers have to get soaked at the...

  19. Comparing air quality impacts of hydrogen and gasoline

    E-Print Network [OSTI]

    Sperling, Dan; Wang, Guihua; Ogden, Joan M.

    2008-01-01

    pathways Light duty ?eet Urban air pollution 1. Introductionof light duty gasoline ?eets to urban air pollution usingThe PM 10 pollution is the least accurate in the light duty

  20. Demand and Price Uncertainty: Rational Habits in International Gasoline Demand

    E-Print Network [OSTI]

    Scott, K. Rebecca

    2013-01-01

    A Joint Model of the Global Crude Oil Market and the U.S.Noureddine. 2002. World crude oil and natural gas: a demandelasticity of demand for crude oil, not gasoline. Results

  1. Gasoline Prices, Fuel Economy, and the Energy Paradox

    E-Print Network [OSTI]

    Wozny, Nathan

    It is often asserted that consumers purchasing automobiles or other goods and services underweight the costs of gasoline or other "add-ons." We test this hypothesis in the US automobile market by examining the effects of ...

  2. Lean Gasoline System Development for Fuel Efficient Small Cars

    SciTech Connect (OSTI)

    2013-08-30

    The General Motors and DOE cooperative agreement program DE-EE0003379 is completed. The program has integrated and demonstrated a lean-stratified gasoline engine, a lean aftertreatment system, a 12V Stop/Start system and an Active Thermal Management system along with the necessary controls that significantly improves fuel efficiency for small cars. The fuel economy objective of an increase of 25% over a 2010 Chevrolet Malibu and the emission objective of EPA T2B2 compliance have been accomplished. A brief review of the program, summarized from the narrative is: The program accelerates development and synergistic integration of four cost competitive technologies to improve fuel economy of a light-duty vehicle by at least 25% while meeting Tier 2 Bin 2 emissions standards. These technologies can be broadly implemented across the U.S. light-duty vehicle product line between 2015 and 2025 and are compatible with future and renewable biofuels. The technologies in this program are: lean combustion, innovative passive selective catalyst reduction lean aftertreatment, 12V stop/start and active thermal management. The technologies will be calibrated in a 2010 Chevrolet Malibu mid-size sedan for final fuel economy demonstration.

  3. Petroleum Products Table 43. Refiner Motor Gasoline Volumes...

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    158.8 171.7 1,129.2 1,213.6 111.8 2,454.6 631.2 700.2 4,526.9 5,831.6 452.2 10,810.7 November ... 164.9 176.6 W 1,211.2 W 2,506.3 645.9...

  4. Petroleum Products Table 43. Refiner Motor Gasoline Volumes...

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    5.8 W W 739.0 1997 Average ... 0.9 W 391.3 98.2 2.4 61.0 5.4 7.2 19.8 452.2 Michigan January ... W W 759.3 74.4 8.7 199.9 63.6 99.8 W...

  5. Petroleum Products Table 43. Refiner Motor Gasoline Volumes...

    Gasoline and Diesel Fuel Update (EIA)

    2,815.4 3,589.6 5,598.2 - 9,187.8 June ... 13,788.8 14,403.5 18,700.0 51,246.4 7,372.8 77,319.2 2,937.3 3,022.2 3,617.2 5,435.9 - 9,053.1 July...

  6. Refinery & Blender Net Production of Finished Motor Gasoline

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet)Decade Year-0 Year-1 Year-2Feet)Thousand Cubic Feet)698 1.8732009

  7. Restructuring: The Changing Face of Motor Gasoline Marketing

    Reports and Publications (EIA)

    2001-01-01

    This report reviews the U.S. motor gasoline marketing industry during the period 1990 to 1999, focusing on changes that occurred during the period. The report incorporates financial and operating data from the Energy Information Administration's Financial Reporting System (FRS), motor gasoline outlet counts collected by the National Petroleum News from the states, and U.S. Census Bureau salary and employment data published in County Business Patterns.

  8. Integrating AI Planning and Integer Programming for Use in Integrated Product and Process Design

    E-Print Network [OSTI]

    Chowdhury, Abdur

    of design elements and plan elements, and a GUI for user control of the system's operation. Introduction is a collection of design elements (the electronic and mechanical parts to be used in the design) and process-plan elements (the manufacturing processes needed for the parts used in the design). Each design alternative

  9. Off-Highway Gasoline Consuption Estimation Models Used in the Federal Highway Administration Attribution Process: 2008 Updates

    SciTech Connect (OSTI)

    Hwang, Ho-Ling; Davis, Stacy Cagle

    2009-12-01

    This report is designed to document the analysis process and estimation models currently used by the Federal Highway Administration (FHWA) to estimate the off-highway gasoline consumption and public sector fuel consumption. An overview of the entire FHWA attribution process is provided along with specifics related to the latest update (2008) on the Off-Highway Gasoline Use Model and the Public Use of Gasoline Model. The Off-Highway Gasoline Use Model is made up of five individual modules, one for each of the off-highway categories: agricultural, industrial and commercial, construction, aviation, and marine. This 2008 update of the off-highway models was the second major update (the first model update was conducted during 2002-2003) after they were originally developed in mid-1990. The agricultural model methodology, specifically, underwent a significant revision because of changes in data availability since 2003. Some revision to the model was necessary due to removal of certain data elements used in the original estimation method. The revised agricultural model also made use of some newly available information, published by the data source agency in recent years. The other model methodologies were not drastically changed, though many data elements were updated to improve the accuracy of these models. Note that components in the Public Use of Gasoline Model were not updated in 2008. A major challenge in updating estimation methods applied by the public-use model is that they would have to rely on significant new data collection efforts. In addition, due to resource limitation, several components of the models (both off-highway and public-us models) that utilized regression modeling approaches were not recalibrated under the 2008 study. An investigation of the Environmental Protection Agency's NONROAD2005 model was also carried out under the 2008 model update. Results generated from the NONROAD2005 model were analyzed, examined, and compared, to the extent that is possible on the overall totals, to the current FHWA estimates. Because NONROAD2005 model was designed for emission estimation purposes (i.e., not for measuring fuel consumption), it covers different equipment populations from those the FHWA models were based on. Thus, a direct comparison generally was not possible in most sectors. As a result, NONROAD2005 data were not used in the 2008 update of the FHWA off-highway models. The quality of fuel use estimates directly affect the data quality in many tables published in the Highway Statistics. Although updates have been made to the Off-Highway Gasoline Use Model and the Public Use Gasoline Model, some challenges remain due to aging model equations and discontinuation of data sources.

  10. Systems analysis and futuristic designs of advanced biofuel factory concepts.

    SciTech Connect (OSTI)

    Chianelli, Russ; Leathers, James; Thoma, Steven George; Celina, Mathias Christopher; Gupta, Vipin P.

    2007-10-01

    The U.S. is addicted to petroleum--a dependency that periodically shocks the economy, compromises national security, and adversely affects the environment. If liquid fuels remain the main energy source for U.S. transportation for the foreseeable future, the system solution is the production of new liquid fuels that can directly displace diesel and gasoline. This study focuses on advanced concepts for biofuel factory production, describing three design concepts: biopetroleum, biodiesel, and higher alcohols. A general schematic is illustrated for each concept with technical description and analysis for each factory design. Looking beyond current biofuel pursuits by industry, this study explores unconventional feedstocks (e.g., extremophiles), out-of-favor reaction processes (e.g., radiation-induced catalytic cracking), and production of new fuel sources traditionally deemed undesirable (e.g., fusel oils). These concepts lay the foundation and path for future basic science and applied engineering to displace petroleum as a transportation energy source for good.

  11. Converting the Sun's Heat to Gasoline Solar Fuel Corporation is a clean tech company transforming the way gasoline, diesel and hydrogen fuels

    E-Print Network [OSTI]

    Jawitz, James W.

    million barrels, and nearly 9 million of that is gasoline. With fuel prices rising, consumers are lookingConverting the Sun's Heat to Gasoline Solar Fuel Corporation is a clean tech company transforming the way gasoline, diesel and hydrogen fuels are created and produced. The company has a proprietary

  12. Analyzing patterns of writing and sketching in the product design process

    E-Print Network [OSTI]

    Smith, Rebecca A. (Rebecca Anna)

    2009-01-01

    Design notebooks, or logbooks, are typically used to record notes during the design process. These notes consist of text entries as well as sketches with varying levels of detail. Previous research on the design process ...

  13. Cost-effective uprating of existing hydrogen production units

    SciTech Connect (OSTI)

    Cromarty, B.; Hooper, C.W. (ICI Katalco, Billingham (United Kingdom)); Chlapik, K. (ICI Katalco, Oakbrook Terrace, IL (United States))

    1994-01-01

    The demand for supplemental hydrogen production in refineries is growing significantly worldwide as environmental legislation concerning cleaner gasoline and diesel fuels is introduced. The main manufacturing method for this hydrogen uses the well-proven steam reforming process route. This article lists the advances in catalysts and technology in this area, and shows how they can be applied to existing hydrogen plants in order to maximize throughput. Such retrofit options are generally more cost-effective than the construction of a new hydrogen plant; due to the diversity of hydrogen plant designs and feedstocks used, however, a case-by-case evaluation is needed to determine the best options for a particular plant.

  14. Vertical Relationships and Competition in Retail Gasoline Markets: An Empirical Evidence from Contract Changes in Southern California

    E-Print Network [OSTI]

    Hastings, Justine

    2000-01-01

    Margaret E. “Vancouver's Gasoline-Price Wars: An EmpiricalEvidence from Retail Gasoline Markets” Journal of Law,The Case of Retail Gasoline Markets” Journal of Law and

  15. Size-Resolved Particle Number and Volume Emission Factors for On-Road Gasoline and Diesel Motor Vehicles

    E-Print Network [OSTI]

    Ban-Weiss, George A.

    2009-01-01

    matter from on-road gasoline and diesel vehicles.D.H. , Chase, R.E. , 1999b. Gasoline vehicle particle sizeFactors for On-Road Gasoline and Diesel Motor Vehicles

  16. Simultaneous Efficiency, NOx, and Smoke Improvements through Diesel/Gasoline Dual-Fuel Operation in a Diesel Engine 

    E-Print Network [OSTI]

    Sun, Jiafeng

    2014-08-05

    Diesel/gasoline dual-fuel combustion uses both gasoline and diesel fuel in diesel engines to exploit their different reactivities. This operation combines the advantages of diesel fuel and gasoline while avoiding their disadvantages, attains...

  17. Vertical Relationships and Competition in Retail Gasoline Markets: An Empirical Evidence from Contract Changes in Southern California

    E-Print Network [OSTI]

    Hastings, Justine

    2000-01-01

    the market of company-op gasoline stations. The legislationThrifty gasoline stations by Atlantic Richfield Company (price of gasoline is directly set (at company-op stations)

  18. How managing more efficiently substances in the design process of industrial products? An example from the aeronautics sector

    E-Print Network [OSTI]

    Lemagnen, Maud; Brissaud, Daniel

    2009-01-01

    Lowering environmental impacts of products, i.e. ecodesign, is considered today as a new and promising approach environment protection. This article focuses on ecodesign in the aeronautical sector through the analysis of the practices of a company that designs and produces engine equipments. Noise, gas emissions, fuel consumptions are the main environmental aspects which are targeted by aeronautics. From now on, chemical risk linked to the use of materials and production processes has to be traced, not only because of regulation pressure (e.g. REACh) but also because of customers requirements. So far, the aeronautical sector hasn't been focusing much on managing chemical risks at the design stage. However, new substances regulations notably require that chemical risk management should be by industries used as early as possible in their product development process. The aeronautics sector has therefore to elaborate new chemical risk management. The aim of this paper is to present a new method hat should be adap...

  19. LSST: from Science Drivers to Reference Design and Anticipated Data Products

    E-Print Network [OSTI]

    Z. Ivezic; J. A. Tyson; B. Abel; E. Acosta; R. Allsman; Y. AlSayyad; S. F. Anderson; J. Andrew; R. Angel; G. Angeli; R. Ansari; P. Antilogus; K. T. Arndt; P. Astier; E. Aubourg; T. Axelrod; D. J. Bard; J. D. Barr; A. Barrau; J. G. Bartlett; B. J. Bauman; S. Beaumont; A. C. Becker; J. Becla; C. Beldica; S. Bellavia; G. Blanc; R. D. Blandford; J. S. Bloom; J. Bogart; K. Borne; J. F. Bosch; D. Boutigny; W. N. Brandt; M. E. Brown; J. S. Bullock; P. Burchat; D. L. Burke; G. Cagnoli; D. Calabrese; S. Chandrasekharan; S. Chesley; E. C. Cheu; J. Chiang; C. F. Claver; A. J. Connolly; K. H. Cook; A. Cooray; K. R. Covey; C. Cribbs; W. Cui; R. Cutri; G. Daubard; G. Daues; F. Delgado; S. Digel; P. Doherty; R. Dubois; G. P. Dubois-Felsmann; J. Durech; M. Eracleous; H. Ferguson; J. Frank; M. Freemon; E. Gangler; E. Gawiser; J. C. Geary; P. Gee; M. Geha; R. R. Gibson; D. K. Gilmore; T. Glanzman; I. Goodenow; W. J. Gressler; P. Gris; A. Guyonnet; P. A. Hascall; J. Haupt; F. Hernandez; C. Hogan; D. Huang; M. E. Huffer; W. R. Innes; S. H. Jacoby; B. Jain; J. Jee; J. G. Jernigan; D. Jevremovic; K. Johns; R. L. Jones; C. Juramy-Gilles; M. Juric; S. M. Kahn; J. S. Kalirai; N. Kallivayalil; B. Kalmbach; J. P. Kantor; M. M. Kasliwal; R. Kessler; D. Kirkby; L. Knox; I. Kotov; V. L. Krabbendam; S. Krughoff; P. Kubanek; J. Kuczewski; S. Kulkarni; R. Lambert; L. Le Guillou; D. Levine; M. Liang; K-T. Lim; C. Lintott; R. H. Lupton; A. Mahabal; P. Marshall; S. Marshall; M. May; R. McKercher; M. Migliore; M. Miller; D. J. Mills; D. G. Monet; M. Moniez; D. R. Neill; J-Y. Nief; A. Nomerotski; M. Nordby; P. O'Connor; J. Oliver; S. S. Olivier; K. Olsen; S. Ortiz; R. E. Owen; R. Pain; J. R. Peterson; C. E. Petry; F. Pierfederici; S. Pietrowicz; R. Pike; P. A. Pinto; R. Plante; S. Plate; P. A. Price; M. Prouza; V. Radeka; J. Rajagopal; A. Rasmussen; N. Regnault; S. T. Ridgway; S. Ritz; W. Rosing; C. Roucelle; M. R. Rumore; S. Russo; A. Saha; B. Sassolas; T. L. Schalk; R. H. Schindler; D. P. Schneider; G. Schumacher; J. Sebag; G. H. Sembroski; L. G. Seppala; I. Shipsey; N. Silvestri; J. A. Smith; R. C. Smith; M. A. Strauss; C. W. Stubbs; D. Sweeney; A. Szalay; P. Takacs; J. J. Thaler; R. Van Berg; D. Vanden Berk; K. Vetter; F. Virieux; B. Xin; L. Walkowicz; C. W. Walter; D. L. Wang; M. Warner; B. Willman; D. Wittman; S. C. Wolff; W. M. Wood-Vasey; P. Yoachim; H. Zhan; for the LSST Collaboration

    2014-08-29

    (Abridged) We describe here the most ambitious survey currently planned in the optical, the Large Synoptic Survey Telescope (LSST). A vast array of science will be enabled by a single wide-deep-fast sky survey, and LSST will have unique survey capability in the faint time domain. The LSST design is driven by four main science themes: probing dark energy and dark matter, taking an inventory of the Solar System, exploring the transient optical sky, and mapping the Milky Way. LSST will be a wide-field ground-based system designed to obtain multiple images covering the sky visible from Cerro Pach\\'{o}n in northern Chile. The telescope will have an 8.4 m (6.5 m effective) primary mirror, a 9.6 deg$^2$ field of view, and a 3.2 Gigapixel camera. This system can image about 10,000 square degrees of sky in three clear nights using pairs of 15-second exposures twice per night, with typical 5$\\sigma$ depth for point sources of $r\\sim24.5$ (AB). The project is in the construction phase and will begin regular survey operations by 2022. The survey area will be contained within 30,000 deg$^2$ with $\\delta<+34.5^\\circ$, and will be imaged multiple times in six bands, $ugrizy$, covering the wavelength range 320--1050 nm. About 90\\% of the observing time will be devoted to a deep-wide-fast survey mode which will uniformly observe a 18,000 deg$^2$ region about 800 times (summed over all six bands) during the anticipated 10 years of operations, and yield a coadded map to $r\\sim27.5$. The remaining 10\\% of the observing time will be allocated to projects such as a Very Deep and Fast time domain survey. The goal is to make LSST data products, including a relational database of about 32 trillion observations of 40 billion objects, available to the public and scientists around the world.

  20. Review on Biomass Torrefaction Process and Product Properties and Design of Moving Bed Torrefaction System Model Development

    SciTech Connect (OSTI)

    Jaya Shankar Tumuluru; Christopher T. Wright; Shahab Sokhansanj

    2011-08-01

    A Review on Torrefaction Process and Design of Moving Bed Torrefaction System for Biomass Processing Jaya Shankar Tumuluru1, Shahab Sokhansanj2 and Christopher T. Wright1 Idaho National Laboratory Biofuels and Renewable Energy Technologies Department Idaho Falls, Idaho 83415 Oak Ridge National Laboratory Bioenergy Resource and Engineering Systems Group Oak Ridge, TN 37831 Abstract Torrefaction is currently developing as an important preprocessing step to improve the quality of biomass in terms of physical properties, and proximate and ultimate composition. Torrefaction is a slow heating of biomass in an inert or reduced environment to a maximum temperature of 300 C. Torrefaction can also be defined as a group of products resulting from the partially controlled and isothermal pyrolysis of biomass occurring in a temperature range of 200-230 C and 270-280 C. Thus, the process can also be called a mild pyrolysis as it occurs at the lower temperature range of the pyrolysis process. At the end of the torrefaction process, a solid uniform product with lower moisture content and higher energy content than raw biomass is produced. Most of the smoke-producing compounds and other volatiles are removed during torrefaction, which produces a final product that will have a lower mass but a higher heating value. There is a lack of literature on the design aspects of torrefaction reactor and a design sheet for estimating the dimensions of the torrefier based on capacity. This study includes (a) conducting a detailed review on the torrefaction of biomass in terms of understanding the process, product properties, off-gas compositions, and methods used, and (b) to design a moving bed torrefier, taking into account the basic fundamental heat and mass transfer calculations. Specific objectives include calculating the dimensions like diameter and height of the moving packed bed torrefier for different capacities ranging from 25-1000 kg/hr, designing the heat loads and gas flow rates, and developing an interactive excel sheet where the user can define design specifications.

  1. Advanced turbine systems program conceptual design and product development. Quarterly report, February 1995--April 1995

    SciTech Connect (OSTI)

    1995-06-01

    Research continued on the design of advanced turbine systems. This report describes the design and test of critical components such as blades, materials, cooling, combustion, and optical diagnostics probes.

  2. Socio-cognitive analysis of engineering systems design : shared knowledge, process, and product

    E-Print Network [OSTI]

    Avnet, Mark Sean

    2009-01-01

    This research is based on the well-known but seldom stated premise that the design of complex engineered systems is done by people -- each with their own knowledge, thoughts, and views about the system being designed. To ...

  3. Advanced turbine systems program -- Conceptual design and product development. Final report

    SciTech Connect (OSTI)

    1996-07-26

    This Final Technical Report presents the accomplishments on Phase 2 of the Advanced Turbine Systems (ATS). The ATS is an advanced, natural gas fired gas turbine system that will represent a major advance on currently available industrial gas turbines in the size range of 1--20 MW. This report covers a market-driven development. The Market Survey reported in Section 5 identified the customer`s performance needs. This market survey used analyses performed by Solar turbine Incorporated backed up by the analyses done by two consultants, Research Decision Consultants (RDC) and Onsite Energy Corporation (Onsite). This back-up was important because it is the belief of all parties that growth of the ATS will depend both on continued participation in Solar`s traditional oil and gas market but to a major extent on a new market. This new market is distributed electrical power generation. Difficult decisions have had to be made to meet the different demands of the two markets. Available resources, reasonable development schedules, avoidance of schedule or technology failures, probable acceptance by the marketplace, plus product cost, performance and environmental friendliness are a few of the complex factors influencing the selection of the Gas Fired Advanced Turbine System described in Section 3. Section 4 entitled ``Conversion to Coal`` was a task which addresses the possibility of a future interruption to an economic supply of natural gas. System definition and analysis is covered in Section 6. Two major objectives were met by this work. The first was identification of those critical technologies that can support overall attainment of the program goals. Separate technology or component programs were begun to identify and parameterize these technologies and are described in Section 7. The second objective was to prepare parametric analyses to assess performance sensitivity to operating variables and to select design approaches to meet the overall program goals.

  4. DESIGN AND DEVELOPMENT OF COST EFFECTIVE SURFACE MOUNTED WATER TURBINES FOR RURAL ELECTRICITY PRODUCTION

    E-Print Network [OSTI]

    Sóbester, András

    model and design of hydro dynamically balanced rotor. Small-scale hydro power is the key source of serving the ever increasing demand of power requirements in the shortest time are driving forces for small/low head hydro power generation. This project intends to design and develop cost effective design

  5. Modeling and Analysis of Natural Gas and Gasoline In A High Compressio...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Analysis of Natural Gas and Gasoline In A High Compression Ratio High Efficiency ICRE Modeling and Analysis of Natural Gas and Gasoline In A High Compression Ratio High...

  6. Biofuel Facts for the Road: The Energy Department and Your Gasoline...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Biofuel Facts for the Road: The Energy Department and Your Gasoline Pump Biofuel Facts for the Road: The Energy Department and Your Gasoline Pump December 18, 2014 - 2:08pm Addthis...

  7. Fact #675: May 16, 2011 Gasoline Prices by Region, May 2, 2011

    Office of Energy Efficiency and Renewable Energy (EERE)

    The West Coast region paid the highest prices for gasoline averaging $4.14 for a gallon of regular gasoline while the Rocky Mountain region paid the least at $3.70 per gallon. The southern states,...

  8. Do Gasoline Prices Resond Asymmetrically to Cost Shocks? The Confounding Effect of Edgeworth Cycles

    E-Print Network [OSTI]

    Noel, Michael

    2007-01-01

    2006) "Retail Gasoline Price Cycles: Evidence from Guelph,Station-Specific Retail Price D a t a " , mimeo. Bachmeier,on Asymmetric Gasoline Price Re­ and Statistics "Rockets and

  9. Motor Gasoline Consumption 2008 - Historical Perspective and Short-Term Projections

    Reports and Publications (EIA)

    2008-01-01

    This report reviews how gasoline markets relate to population, income, prices, and the growing role of ethanol. It also analyzes the structural shift in motor gasoline markets that took place in the late 1990s.

  10. Savings at the pump help push U.S. gasoline demand to 8-year...

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    Savings at the pump help push U.S. gasoline demand to 8-year high U.S. gasoline consumption this year is expected to top 9 million barrels per day for the first time since 2007. In...

  11. Novel Characterization of GDI Engine Exhaust for Gasoline and Mid-Level Gasoline-Alcohol Blends

    SciTech Connect (OSTI)

    Storey, John Morse; Lewis Sr, Samuel Arthur; Szybist, James P; Thomas, John F; Barone, Teresa L; Eibl, Mary A; Nafziger, Eric J; Kaul, Brian C

    2014-01-01

    Gasoline direct injection (GDI) engines can offer improved fuel economy and higher performance over their port fuel-injected (PFI) counterparts, and are now appearing in increasingly more U.S. and European vehicles. Small displacement, turbocharged GDI engines are replacing large displacement engines, particularly in light-duty trucks and sport utility vehicles, in order for manufacturers to meet more stringent fuel economy standards. GDI engines typically emit the most particulate matter (PM) during periods of rich operation such as start-up and acceleration, and emissions of air toxics are also more likely during this condition. A 2.0 L GDI engine was operated at lambda of 0.91 at typical loads for acceleration (2600 rpm, 8 bar BMEP) on three different fuels; an 87 anti-knock index (AKI) gasoline (E0), 30% ethanol blended with the 87 AKI fuel (E30), and 48% isobutanol blended with the 87 AKI fuel. E30 was chosen to maximize octane enhancement while minimizing ethanol-blend level and iBu48 was chosen to match the same fuel oxygen level as E30. Particle size and number, organic carbon and elemental carbon (OC/EC), soot HC speciation, and aldehydes and ketones were all analyzed during the experiment. A new method for soot HC speciation is introduced using a direct, thermal desorption/pyrolysis inlet for the gas chromatograph (GC). Results showed high levels of aromatic compounds were present in the PM, including downstream of the catalyst, and the aldehydes were dominated by the alcohol blending.

  12. Load Expansion with Diesel/Gasoline RCCI for Improved Engine Efficiency and Emissions

    Broader source: Energy.gov [DOE]

    This poster will describe preliminary emission results of gasoline/diesel RCCI in a medium-duty diesel engine.

  13. Advanced Membrane Systems: Recovering Wasteful and Hazardous Fuel Vapors at the Gasoline Tank

    Office of Energy Efficiency and Renewable Energy (EERE)

    Case study covering Compact Membrane Systems, Inc. and its membrane vapor processor that recovers fuel vapors from gasoline refueling.

  14. Characterization of Pre-Commercial Gasoline Engine Particulates Through Advanced Aerosol Methods

    Broader source: Energy.gov [DOE]

    Advanced aerosol analysis methods were used to examine particulates from single cylinder test engines running on gasoline and ethanol blends.

  15. The Implications of a Gasoline Price Floor for the California Budget and Greenhouse Gas Emissions

    E-Print Network [OSTI]

    Borenstein, Severin

    2008-01-01

    oil price, the expected retail gasoline price and consumption quantities are shown using a short-run demand elasticity assumption

  16. U.S. gasoline prices unchanged (short version)

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices Globaldieselgasoline prices28,gasoline1, 2014gasoline

  17. U.S. gasoline prices unchanged (short version)

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices Globaldieselgasoline prices28,gasoline1,gasoline

  18. Mild hydrocracking for middle distillate production

    SciTech Connect (OSTI)

    Tippett, T.W.; Ward, J.W.

    1985-03-01

    Twenty years ago the first Unicracking plant was installed at Union Oil Company's Los Angeles Refinery. Since that time, 58 Unicracking plants have been installed, converted from other technologies, or are in engineering. The Unicracking process installed at Los Angeles Refinery was pioneering in a number of ways. In particular, it was the first hydrocracking process to use molecular sieve based catalysts. It was also the first hydrocracking process to use integral process technology, namely, the total hydrofined product from the hydrotreater passed without separation into the cracking reactor. The original process was primarily designed to produce high yields of high octane gasoline. Since that time, there have been many changes in the requirements of refinery upgrading units due to changes in and availability of feedstocks, and due to changing product distribution slates. In response to these changing objectives, many modifications have occurred in the Unicracking process and catalysts. Some of the process and catalyst innovations recently implemented are discussed in this paper.

  19. An experimental study of the combustion characteristics in SCCI and CAI based on direct-injection gasoline engine

    SciTech Connect (OSTI)

    Lee, C.H.; Lee, K.H.

    2007-08-15

    Emissions remain a critical issue affecting engine design and operation, while energy conservation is becoming increasingly important. One approach to favorably address these issues is to achieve homogeneous charge combustion and stratified charge combustion at lower peak temperatures with a variable compression ratio, a variable intake temperature and a trapped rate of the EGR using NVO (negative valve overlap). This experiment was attempted to investigate the origins of these lower temperature auto-ignition phenomena with SCCI and CAI using gasoline fuel. In case of SCCI, the combustion and emission characteristics of gasoline-fueled stratified-charge compression ignition (SCCI) engine according to intake temperature and compression ratio was examined. We investigated the effects of air-fuel ratio, residual EGR rate and injection timing on the CAI combustion area. In addition, the effect of injection timing on combustion factors such as the start of combustion, its duration and its heat release rate was also investigated. (author)

  20. Elucidating secondary organic aerosol from diesel and gasoline vehicles through detailed characterization of

    E-Print Network [OSTI]

    Goldstein, Allen

    Elucidating secondary organic aerosol from diesel and gasoline vehicles through detailed 19, 2012 (received for review July 22, 2012) Emissions from gasoline and diesel vehicles and diesel vehicles, and find diesel exhaust is seven times more efficient at forming aerosol than gasoline

  1. he increasing frequency of detection of the widely used gasoline additive methyl tert-

    E-Print Network [OSTI]

    T he increasing frequency of detection of the widely used gasoline additive methyl tert- butyl, the September 15, 1999, Report of the Blue Ribbon Panel on Oxygenates in Gasoline (1) states that between 5 with large releases (e.g., LUFTs). Unprecedented growth in use Use of MTBE as a gasoline additive began

  2. Extension of a Negative Binomial GARCH Model: Analyzing the Effects of Gasoline Price and VMT on

    E-Print Network [OSTI]

    Pourahmadi, Mohsen

    Extension of a Negative Binomial GARCH Model: Analyzing the Effects of Gasoline Price and VMT. In addition, the relationship between monthly vehicle miles travelled (VMT) and gasoline prices in Texas was also examined. Ultimately, it is concluded that gasoline prices had no significant effect on DUI fatal

  3. ATOC/CHEM 5151 Problem 9 Combustion of Gasoline and Conservation of Mass

    E-Print Network [OSTI]

    Toohey, Darin W.

    ATOC/CHEM 5151 ­ Problem 9 Combustion of Gasoline and Conservation of Mass Answers will be posted Thursday, September 18, 2014 Gasoline is composed of a variety of hydrocarbons with 4 to 12 carbon atoms (e for the complete combustion of gasoline: _C8H18 + _O2 _CO2 + _H2O 1. Balance the equation (i.e., find

  4. Introduction The use of ethanol as a gasoline additive is likely to

    E-Print Network [OSTI]

    Alvarez, Pedro J.

    Introduction The use of ethanol as a gasoline additive is likely to increase in the near future investigators have developed mathematical models for predicting the effect of ethanol (added to gasoline at 10 these models provide valuable insight into the potential ground water impacts of ethanol in gasoline

  5. Atmospheric Environment 38 (2004) 14171423 Measurements of ion concentration in gasoline and diesel

    E-Print Network [OSTI]

    Yu, Fangqun

    2004-01-01

    Atmospheric Environment 38 (2004) 1417­1423 Measurements of ion concentration in gasoline of a gasoline engine (K-car) and a diesel engine (diesel generator). Under the experimental set-up reported all of the ions smaller than 3 nm in the gasoline engine exhaust, and is above 2.7 Â 108 cmŔ3

  6. Gasoline price effects on traffic safety in urban and rural areas: Evidence from Minnesota, 19982007

    E-Print Network [OSTI]

    Levinson, David M.

    Gasoline price effects on traffic safety in urban and rural areas: Evidence from Minnesota, 1998 February 2012 Received in revised form 3 May 2013 Accepted 24 May 2013 Keywords: Gasoline prices Traffic examines the role of gasoline prices in the occurrence of traffic crashes. However, no studies have

  7. Automakers' Short-Run Responses to Changing Gasoline Prices and the Implications for Energy Policy

    E-Print Network [OSTI]

    Edwards, Paul N.

    Automakers' Short-Run Responses to Changing Gasoline Prices and the Implications for Energy Policy as if consumers respond to gasoline prices. We estimate a selection-corrected regression equation and exploit operating costs between vehicles. Keywords: automobile prices, gasoline prices, environmental policy JEL

  8. CLEARING THE AIR? THE EFFECTS OF GASOLINE CONTENT REGULATION ON AIR QUALITY

    E-Print Network [OSTI]

    Edwards, Paul N.

    gasoline markets and raise prices paid by consumers. We provide the first comprehensive empirical estimatesCLEARING THE AIR? THE EFFECTS OF GASOLINE CONTENT REGULATION ON AIR QUALITY Maximilian Auffhammer and Ryan Kellogg* January 2009 Abstract This paper examines the effects of U.S. gasoline content

  9. Vertical Integration in Gasoline Supply: An Empirical Test of Raising Rivals' Costs

    E-Print Network [OSTI]

    California at Berkeley. University of

    gasoline prices. The 1997 acquisition of Unocal's West Coast refining and marketing assets by Tosco, and potentially confounding city-specific covariates. We find that Tosco increased the wholesale price of gasoline During the week of January 4-8, 1999, the average wholesale price of unbranded regular gasoline was 46

  10. Stranded Vehicles: How Gasoline Taxes Change the Value of Households' Vehicle Assets

    E-Print Network [OSTI]

    Rothman, Daniel

    of increases in gasoline prices varies across income, geography, and political affiliation. One standard that changes in gasoline prices can have sizable effects on the market value of vehicles. In this paper in gasoline prices affect the value of the vehicles that people own and how this varies across demographic

  11. The Origins of US Transportation Policy: Was There Ever Support for Gasoline Taxes?

    E-Print Network [OSTI]

    Rothman, Daniel

    and rationing and vehicle taxes over higher gasoline taxes or letting gasoline prices clear the market. GivenThe Origins of US Transportation Policy: Was There Ever Support for Gasoline Taxes? Christopher R. Knittel January 7, 2013 Abstract From 1864 to 1972, the real price of oil fell by, on average, over one

  12. The impact of gasoline price changes on traffic safety: a time geography explanation Guangqing Chi a,

    E-Print Network [OSTI]

    Levinson, David M.

    The impact of gasoline price changes on traffic safety: a time geography explanation Guangqing Chi, United States a r t i c l e i n f o Keywords: Time geography Gasoline prices Traffic safety Traffic crashes Fatal crashes Space­time path a b s t r a c t The impact of gasoline price changes on traffic

  13. forthcoming in Economic Letters Incidence of Federal and State Gasoline Taxes

    E-Print Network [OSTI]

    Perloff, Jeffrey M.

    on gasoline, and President Bill Clinton, when calling for an energy tax, proposed providing income a gasoline tax to generate revenue arose again in 2000 when some policy makers considered suspending the 4, unleaded gasoline in the first quarter of 2000 was $2.43 in Italy, $2.56 in Germany, $2.57 in France, $2

  14. The Impact of Ethanol Blending on U.S. Gasoline Prices

    SciTech Connect (OSTI)

    none,

    2008-11-01

    This study assesses the impact of ethanol blending on gasoline prices in the United States today and the potential impact of ethanol on gasoline prices at higher blending concentrations (10%, 15% and 20% of the total U.S. gasoline consumption).

  15. The Impact of Carbon Control on Low-Income Household Electricity and Gasoline Expenditures

    SciTech Connect (OSTI)

    Eisenberg, Joel Fred [ORNL

    2008-06-01

    In July of 2007 The Department of Energy's (DOE's) Energy Information Administration (EIA) released its impact analysis of 'The Climate Stewardship And Innovation Act of 2007,' known as S.280. This legislation, cosponsored by Senators Joseph Lieberman and John McCain, was designed to significantly cut U.S. greenhouse gas emissions over time through a 'cap-and-trade' system, briefly described below, that would gradually but extensively reduce such emissions over many decades. S.280 is one of several proposals that have emerged in recent years to come to grips with the nation's role in causing human-induced global climate change. EIA produced an analysis of this proposal using the National Energy Modeling System (NEMS) to generate price projections for electricity and gasoline under the proposed cap-and-trade system. Oak Ridge National Laboratory integrated those price projections into a data base derived from the EIA Residential Energy Consumption Survey (RECS) for 2001 and the EIA public use files from the National Household Transportation Survey (NHTS) for 2001 to develop a preliminary assessment of impact of these types of policies on low-income consumers. ORNL will analyze the impacts of other specific proposals as EIA makes its projections for them available. The EIA price projections for electricity and gasoline under the S.280 climate change proposal, integrated with RECS and NHTS for 2001, help identify the potential effects on household electric bills and gasoline expenditures, which represent S.280's two largest direct impacts on low-income household budgets in the proposed legislation. The analysis may prove useful in understanding the needs and remedies for the distributive impacts of such policies and how these may vary based on patterns of location, housing and vehicle stock, and energy usage.

  16. Design Concepts for Co-Production of Power, Fuels & Chemicals Via Coal/Biomass Mixtures

    SciTech Connect (OSTI)

    Rao, A. D.; Chen, Q.; Samuelsen, G. S.

    2012-09-30

    The overall goal of the program is to develop design concepts, incorporating advanced technologies in areas such as oxygen production, feed systems, gas cleanup, component separations and gas turbines, for integrated and economically viable coal and biomass fed gasification facilities equipped with carbon capture and storage for the following scenarios: (i) coproduction of power along with hydrogen, (ii) coproduction of power along with fuels, (iii) coproduction of power along with petrochemicals, and (iv) coproduction of power along with agricultural chemicals. To achieve this goal, specifically the following objectives are met in this proposed project: (i) identify advanced technology options and innovative preliminary design concepts that synergistically integrate plant subsections, (ii) develop steady state system simulations to predict plant efficiency and environmental signature, (iii) develop plant cost estimates by capacity factoring major subsystems or by major equipment items where required, and then capital, operating and maintenance cost estimates, and (iv) perform techno- economic analyses for the above described coproduction facilities. Thermal efficiencies for the electricity only cases with 90% carbon capture are 38.26% and 36.76% (HHV basis) with the bituminous and the lignite feedstocks respectively. For the coproduction cases (where 50% of the energy exported is in the form of electricity), the electrical efficiency, as expected, is highest for the hydrogen coproduction cases while lowest for the higher alcohols (ethanol) coproduction cases. The electrical efficiencies for Fischer-Tropsch coproduction cases are slightly higher than those for the methanol coproduction cases but it should be noted that the methanol (as well as the higher alcohol) coproduction cases produce the finished coproduct while the Fischer-Tropsch coproduction cases produce a coproduct that requires further processing in a refinery. The cross comparison of the thermal performance between the various coproduct cases is further complicated by the fact that the carbon footprint is not the same when carbon leaving with the coproduct are accounted for. The economic analysis and demand for a particular coproduct in the market place is a more meaningful comparison of the various coproduction scenarios. The first year cost of electricity calculated for the bituminous coal is $102.9/MWh while that for the lignite is $108.1/MWh. The calculated cost of hydrogen ranged from $1.42/kg to $2.77/kg depending on the feedstock, which is lower than the DOE announced hydrogen cost goal of $3.00/kg in July 14, 2005. Methanol cost ranged from $345/MT to $617/MT, while the market price is around $450/MT. For Fischer-Tropsch liquids, the calculated cost ranged from $65/bbl to $112/bbl, which is comparable to the current market price of crude oil at around $100/bbl. It should be noted, however, that F-T liquids contain no sulfur and nitrogen compounds. The calculated cost of alcohol ranged from $4.37/gal to $5.43/gal, while it ranged from $2.20/gal to $3.70/gal in a DOE funded study conducted by Louisiana State University. The Louisiana State University study consisted of a significantly larger plant than our study and benefited from economies of scale. When the plant size in our study is scaled up to similar size as in the Louisiana State University study, cost of alcohol is then reduced to a range of $3.24/gal to $4.28/gal, which is comparable. Urea cost ranged from $307/MT to $428/MT, while the market price is around $480/MT.

  17. Advanced turbine systems program conceptual design and product development quarterly report, May--July 1995

    SciTech Connect (OSTI)

    1995-08-01

    Progress for the quarter is reported in the areas of system definition and analysis and design and test of critical components.

  18. Advanced turbine systems program conceptual design and product development. Quarterly report, February, 1996--April, 1996

    SciTech Connect (OSTI)

    1996-07-08

    This paper describes the design and testing of critical gas turbine components. Development of catalytic combustors and diagnostic equipment is included.

  19. PRODUCTION TPBAR INPUTS FOR CORE DESIGNERS TTQP-1-116 Rev 15

    SciTech Connect (OSTI)

    Collins, Brian A.; Love, Edward F.; Thornhill, Cheryl K.

    2012-11-01

    The purpose of this controlled document is to provide a convenient reference for tritiumproducing burnable absorber rod (TPBAR) parameters used by reactor core designers.

  20. Design Case Summary: Production of Mixed Alcohols from Municipal Solid Waste via Gasification

    SciTech Connect (OSTI)

    None

    2010-03-01

    The Biomass Program develops design cases to understand the current state of conversion technologies and to determine where improvements need to take place in the future. This design case establishes cost targets for converting MSW to ethanol and other mixed alcohols via gasification.

  1. Utilization of Renewable Oxygenates as Gasoline Blending Components

    SciTech Connect (OSTI)

    Yanowitz, J.; Christensen, E.; McCormick, R. L.

    2011-08-01

    This report reviews the use of higher alcohols and several cellulose-derived oxygenates as blend components in gasoline. Material compatibility issues are expected to be less severe for neat higher alcohols than for fuel-grade ethanol. Very little data exist on how blending higher alcohols or other oxygenates with gasoline affects ASTM Standard D4814 properties. Under the Clean Air Act, fuels used in the United States must be 'substantially similar' to fuels used in certification of cars for emission compliance. Waivers for the addition of higher alcohols at concentrations up to 3.7 wt% oxygen have been granted. Limited emission testing on pre-Tier 1 vehicles and research engines suggests that higher alcohols will reduce emissions of CO and organics, while NOx emissions will stay the same or increase. Most oxygenates can be used as octane improvers for standard gasoline stocks. The properties of 2-methyltetrahydrofuran, dimethylfuran, 2-methylfuran, methyl pentanoate and ethyl pentanoate suggest that they may function well as low-concentration blends with gasoline in standard vehicles and in higher concentrations in flex fuel vehicles.

  2. Fact #890: September 14, 2015 Gasoline Prices Are Affected by...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2.925 3.615 3.869 Aug 03, 2015 2.747 2.785 2.615 2.584 2.485 2.897 3.549 3.781 Source: Energy Information Administration, Weekly Retail Gasoline and Diesel Prices, accessed...

  3. Masters Thesis- Criticality Alarm System Design Guide with Accompanying Alarm System Development for the Radioisotope Production Laboratory in Richland, Washington

    SciTech Connect (OSTI)

    Greenfield, Bryce A.

    2009-12-20

    A detailed instructional manual was created to guide criticality safety engineers through the process of designing a criticality alarm system (CAS) for Department of Energy (DOE) hazard class 1 and 2 facilities. Regulatory and technical requirements were both addressed. A list of design tasks and technical subtasks are thoroughly analyzed to provide concise direction for how to complete the analysis. An example of the application of the design methodology, the Criticality Alarm System developed for the Radioisotope Production Laboratory (RPL) of Richland, Washington is also included. The analysis for RPL utilizes the Monte Carlo code MCNP5 for establishing detector coverage in the facility. Significant improvements to the existing CAS were made that increase the reliability, transparency, and coverage of the system.

  4. Product design and development of an aerodynamic hydration system for bicycling and triathlon

    E-Print Network [OSTI]

    Cote, Mark (Mark Brian)

    2007-01-01

    Proper hydration and aerodynamic performance are both essential needs of a competitive cyclist or triathlete. Several aerodynamic systems have been developed for use on bicycles but few have been designed to be truly ...

  5. Man-portable power generation devices : product design and supporting algorithms

    E-Print Network [OSTI]

    Mitsos, Alexander

    2006-01-01

    A methodology for the optimal design and operation of microfabricated fuel cell systems is proposed and algorithms for relevant optimization problems are developed. The methodology relies on modeling, simulation and ...

  6. Impact of prototyping resource environments on idea generation in product design

    E-Print Network [OSTI]

    Schlecht, Lisa (Lisa Anne)

    2013-01-01

    Some of the world's most challenging problems will require distributed innovation capacity in order to create high-quality and sustainable solutions. However, access to prototyping resources varies and design strategies ...

  7. Managing chemical risk during design in aeronautics: from technical product data to exposure assessment

    E-Print Network [OSTI]

    Boyer, Edmond

    regulations and agreements. ACARE1 organization proposes the objective of reducing green houses gases to effluents flows (gas emissions, noise). Intrinsic impacts match with the product itself and the potential

  8. Product line-up design based on preference measurement : a case study on TV industry

    E-Print Network [OSTI]

    Park, Chang Bae, S.M. Massachusetts Institute of Technology

    2011-01-01

    Sony, in 2010, introduced innovative product line-up setting process for its TV, using the technique of market segmentation and conjoint analysis. This practice was expected to increase its sales compared to traditional ...

  9. Effects of federal risk management programs on investment, production, and contract design under uncertainty 

    E-Print Network [OSTI]

    Seo, Sangtaek

    2006-04-12

    Agricultural producers face uncertain agricultural production and market conditions. Much of the uncertainty faced by agricultural producers cannot be controlled by the producer, but can be managed. Several risk management programs are available...

  10. Analysis of the product development process for geographically distant teams in vehicle tophat design phases

    E-Print Network [OSTI]

    Puerto Valdez, Antonio del

    2010-01-01

    The current global economic recession is putting pressure to increase model variation on the car makers, while at the same time leveraging highly efficient and proven platforms and product development assets globally is ...

  11. Fact #858 February 2, 2015 Retail Gasoline Prices in 2014 Experienced the Largest Decline since 2008 – Dataset

    Office of Energy Efficiency and Renewable Energy (EERE)

    Excel file with dataset for Retail Gasoline Prices in 2014 Experienced the Largest Decline since 2008

  12. UST corrective action technologies: Engineering design of free product recovery systems. Project report

    SciTech Connect (OSTI)

    Parker, J.C.; Waddill, D.W.; Johnson, J.A.

    1996-03-01

    The objective of this project was to develop a technical assistance document for assessment of subsurface hydrocarbon spills and for evaluating effects of well placement and pumping rates on separate phase plume control and on free product recovery. Procedures developed for estimation of hydrocarbon spill volume include interpolation and spatial integration of measurements from soil cores, and fluid level data from monitoring wells. The first method involves vertical integration of soil concentration measurements to yield oil volume or species mass per unit area followed by kriging and areal integration to estimate the total mass or volume within the measurement zone. The second method involves kriging of well fluid levels, calculation of free oil volume per area using a physically based model for vertically hydrostatic three phase fluid distributions that converts well product thickness to soil product thickness, followed by areal integration to estimate the volume of free product floating on the water table. A procedure is presented to evaluate effects of steady-state water pumping from multiple point sources on the oil flow gradients to evaluate if hydraulic control of plume spreading will be obtained for a selected system of pumping wells and/or trenches. The applicability of trenches and vacuum-enhanced product recovery to hydrocarbon spills is also discussed.

  13. Mixture Designs 1. Design and Analysis of Mixture Experiments

    E-Print Network [OSTI]

    Buyske, Steve

    the total amounts of the components. In product formulations, examples would be gasoline, soaps (and all other components zero). The i xi term is called the linear blending term. The quadratic terms should not be thought of as interaction but instead are called nonlinear blending terms. If i j

  14. The economics of biological methods of hydrogen production

    E-Print Network [OSTI]

    Resnick, Richard J. (Richard Jay), 1971-

    2004-01-01

    The costs to produce and utilize hydrogen are extremely high per unit of energy when compared to fossil fuel energy sources such as natural gas or gasoline. The cheapest hydrogen production approaches today are also the ...

  15. Advanced turbine systems program conceptual design and product development. Annual report, August 1994--July 1995

    SciTech Connect (OSTI)

    1994-10-01

    Objective of the ATS program is to develop ultra-high efficiency, environmentally superior, and cost-competitive gas turbine systems for base-load application in utility, independent power producer, and industrial markets. This report discusses the major accomplishments achieved during the second year of the ATS Phase 2 program, particularly the design and test of critical components.

  16. Man-Portable Power Generation Devices: Product Design and Supporting Algorithms

    E-Print Network [OSTI]

    and operation of microfabricated fuel cell sys- tems is proposed and algorithms for relevant optimization here. Microfabricated fuel cell systems are a promising alternative to batteries for man- portable for the degree of Doctor of Philosophy in Chemical Engineering Abstract A methodology for the optimal design

  17. 23 March 2002 (c) 2002 Filippo A. Salustri 1 Product Design Specifications

    E-Print Network [OSTI]

    Salustri, Filippo A.

    Aka the 80/20 rule time cost Oops! #12;23 March 2002 (c) 2002 Filippo A. Salustri 3 What's the Problem://deed.ryerson.ca/~fil/ #12;23 March 2002 (c) 2002 Filippo A. Salustri 2 What's the Problem? The Pareto Principle in Design

  18. Using Data-Driven Analytics to Assess the Impact of Design Parameters on Production from Shale

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    Shale Esmaili, S., West Virginia University and Mohaghegh, S.D., Intelligent Solution Inc. and West of SPE copyright. Abstract The importance of production from Shale and its impact on the total US energy from Shale assets with different degrees of success. The notion that shale is a "statistical play" may

  19. MODEL BASED BIOMASS SYSTEM DESIGN OF FEEDSTOCK SUPPLY SYSTEMS FOR BIOENERGY PRODUCTION

    SciTech Connect (OSTI)

    David J. Muth, Jr.; Jacob J. Jacobson; Kenneth M. Bryden

    2013-08-01

    Engineering feedstock supply systems that deliver affordable, high-quality biomass remains a challenge for the emerging bioenergy industry. Cellulosic biomass is geographically distributed and has diverse physical and chemical properties. Because of this feedstock supply systems that deliver cellulosic biomass resources to biorefineries require integration of a broad set of engineered unit operations. These unit operations include harvest and collection, storage, preprocessing, and transportation processes. Design decisions for each feedstock supply system unit operation impact the engineering design and performance of the other system elements. These interdependencies are further complicated by spatial and temporal variances such as climate conditions and biomass characteristics. This paper develops an integrated model that couples a SQL-based data management engine and systems dynamics models to design and evaluate biomass feedstock supply systems. The integrated model, called the Biomass Logistics Model (BLM), includes a suite of databases that provide 1) engineering performance data for hundreds of equipment systems, 2) spatially explicit labor cost datasets, and 3) local tax and regulation data. The BLM analytic engine is built in the systems dynamics software package PowersimTM. The BLM is designed to work with thermochemical and biochemical based biofuel conversion platforms and accommodates a range of cellulosic biomass types (i.e., herbaceous residues, short- rotation woody and herbaceous energy crops, woody residues, algae, etc.). The BLM simulates the flow of biomass through the entire supply chain, tracking changes in feedstock characteristics (i.e., moisture content, dry matter, ash content, and dry bulk density) as influenced by the various operations in the supply chain. By accounting for all of the equipment that comes into contact with biomass from the point of harvest to the throat of the conversion facility and the change in characteristics, the BLM evaluates economic performance of the engineered system, as well as determining energy consumption and green house gas performance of the design. This paper presents a BLM case study delivering corn stover to produce cellulosic ethanol. The case study utilizes the BLM to model the performance of several feedstock supply system designs. The case study also explores the impact of temporal variations in climate conditions to test the sensitivity of the engineering designs. Results from the case study show that under certain conditions corn stover can be delivered to the cellulosic ethanol biorefinery for $35/dry ton.

  20. Optimal Model-Based Production Planning for

    E-Print Network [OSTI]

    Grossmann, Ignacio E.

    Motivation Refining Operation and crude cost variable cost of production Largest product price components Key to refinery profit and economics Refinery production planning models Operation optimization Crude selection Statement Cat Ref Hydrotreatment Gasoline blending Distillate blending Gas oil blending Cat Crack CDU crude1

  1. Impact of demand-enhancing farm policy on the agricultural sector: a firm level simulation of ethanol production subsidies 

    E-Print Network [OSTI]

    Wasson, Leta Susanne

    1990-01-01

    to a 60 cent per gallon subsidy on each gallon of ethanol blended with gasoline. Other federal incentives include the Crude Oil Windfall Profit Tax of 1980 which gave blenders of ethanol an income tax credit and extended the gasoline tax exemption... subsidies providing for all off- highway uses of diesel fuel and gasoline to be exempt from Federal Excise taxes. Also, the Federal Crop Insurance Corporation has provided insurance against production losses due to weather and other perils at subsidized...

  2. Use of ethyl-t-butyl ether (ETBE) as a gasoline blending component

    SciTech Connect (OSTI)

    Shiblom, C.M.; Schoonveld, G.A.; Riley, R.K.; Pahl, R.H.

    1990-01-01

    The U.S. Treasury Department recently ruled that the ethanol blenders tax credit applies to ethanol used to make ETBE for blending with gasoline. As a result, ETBE may soon become a popular gasoline blending component. Like MTBE ETBE adds oxygen to the fuel while contributing to other performance properties of the gasoline. Phillips Petroleum Company has completed limited driveability and material compatibility studies on gasolines containing ETBE and has determined the effect on various performance parameters such as octane, volatility, and distillation of ETBE in gasoline. Levels of ETBE ranging from 0.0 to 23.5 volume percent (3.7 weight percent oxygen) in gasoline were included in the investigation. Use in gasoline is currently limited to only 12.7 volume percent (2.0 weight percent oxygen) by the gasoline substantially similar rule. No detrimental effects of the ETBE on metal or elastomeric parts common to gasoline delivery and fueling system were found. Also, several favorable blending properties of eTBE in gasoline are apparent as compared to either MTBE or ethanol. This paper presents details of these results.

  3. Syngas Production By Thermochemical Conversion Of H2o And Co2 Mixtures Using A Novel Reactor Design

    SciTech Connect (OSTI)

    Pearlman, Howard; Chen, Chien-Hua

    2014-08-27

    The Department of Energy awarded Advanced Cooling Technologies, Inc. (ACT) an SBIR Phase II contract (#DE-SC0004729) to develop a high-temperature solar thermochemical reactor for syngas production using water and/or carbon dioxide as feedstocks. The technology aims to provide a renewable and sustainable alternative to fossil fuels, promote energy independence and mitigate adverse issues associated with climate change by essentially recycling carbon from carbon dioxide emitted by the combustion of hydrocarbon fuels. To commercialize the technology and drive down the cost of solar fuels, new advances are needed in materials development and reactor design, both of which are integral elements in this program.

  4. Process Design and Economics for Conversion of Lignocellulosic Biomass to Ethanol: Thermochemical Pathway by Indirect Gasification and Mixed Alcohol Synthesis

    SciTech Connect (OSTI)

    Dutta, A.; Talmadge, M.; Hensley, J.; Worley, M.; Dudgeon, D.; Barton, D.; Groendijk, P.; Ferrari, D.; Stears, B.; Searcy, E. M.; Wright, C. T.; Hess, J. R.

    2011-05-01

    This design report describes an up-to-date benchmark thermochemical conversion process that incorporates the latest research from NREL and other sources. Building on a design report published in 2007, NREL and its subcontractor Harris Group Inc. performed a complete review of the process design and economic model for a biomass-to-ethanol process via indirect gasification. The conceptual design presented herein considers the economics of ethanol production, assuming the achievement of internal research targets for 2012 and nth-plant costs and financing. The design features a processing capacity of 2,205 U.S. tons (2,000 metric tonnes) of dry biomass per day and an ethanol yield of 83.8 gallons per dry U.S. ton of feedstock. The ethanol selling price corresponding to this design is $2.05 per gallon in 2007 dollars, assuming a 30-year plant life and 40% equity financing with a 10% internal rate of return and the remaining 60% debt financed at 8% interest. This ethanol selling price corresponds to a gasoline equivalent price of $3.11 per gallon based on the relative volumetric energy contents of ethanol and gasoline.

  5. Esthetically Designed Municipal PV System Maximizes Energy Production and Revenue Return

    Office of Energy Efficiency and Renewable Energy (EERE)

    In late 2008, the City of Sebastopol, CA installed a unique 42 kW grid-interactive photovoltaic (PV) system to provide electricity for pumps of the Sebastopol municipal water system. The resulting innovative Sun Dragon PV system, located in a public park, includes design elements that provide optimized electrical performance and revenue generation for the energy produced while also presenting an artistic and unique appearance to park visitors.

  6. Design Case Summary: Production of Mixed Alcohols from Municipal Solid Waste via Gasification

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: AlternativeCommunication &20081-929-200499Actof2014 Budget Request PROGRAM DESIGN CASE SUMMARY

  7. Chemical kinetic modeling of component mixtures relevant to gasoline

    SciTech Connect (OSTI)

    Mehl, M; Curran, H J; Pitz, W J; Westbrook, C K

    2009-02-13

    Real fuels are complex mixtures of thousands of hydrocarbon compounds including linear and branched paraffins, naphthenes, olefins and aromatics. It is generally agreed that their behavior can be effectively reproduced by simpler fuel surrogates containing a limited number of components. In this work, a recently revised version of the kinetic model by the authors is used to analyze the combustion behavior of several components relevant to gasoline surrogate formulation. Particular attention is devoted to linear and branched saturated hydrocarbons (PRF mixtures), olefins (1-hexene) and aromatics (toluene). Model predictions for pure components, binary mixtures and multi-component gasoline surrogates are compared with recent experimental information collected in rapid compression machine, shock tube and jet stirred reactors covering a wide range of conditions pertinent to internal combustion engines. Simulation results are discussed focusing attention on the mixing effects of the fuel components.

  8. Assessment of California reformulated gasoline impact on vehicle fuel economy

    SciTech Connect (OSTI)

    Aceves, S., LLNL

    1997-01-01

    Fuel economy data contained in the 1996 California Air Resources Board (CARB) report with respect to the introduction of California Reformulated Gasoline (CaRFG) has been examined and reanalyzed by two additional statistical methodologies. Additional data has also been analyzed by these two statistical approaches. Within the assumptions of the analysis, point estimates for the reduction in fuel economy using CaRFG as compared to conventional, non-reformulated gasoline were 2-4%, with a 95% upper confidence bound of 6%. Substantial variations in fuel economy are routine and inevitable due to additional factors which affect mileage, even if there is no change in fuel reformulation. This additional analysis confirms the conclusion reached by CARB with respect to the impact of CaRFG on fuel economy.

  9. The use of daylight in the design of a controlled environment for food production in the Caribbean and other equatorial climates

    E-Print Network [OSTI]

    Charles, Curtis B

    1989-01-01

    This thesis addresses the use of daylight in the design of a controlled environment for food production in the Caribbean and other Equatorial climates. An expanding population has put a tremendous burden on the food ...

  10. MDP-8 Cairo University Conference Proceeding of MDP-8, Cairo University Conference on Mechanical Design and Production Cairo, Egypt, January 4-6, 2004

    E-Print Network [OSTI]

    Saitou, Kazuhiro "Kazu"

    Design and Production Cairo, Egypt, January 4-6, 2004 77 TOPOLOGY OPTIMIZATION OF STRUCTURAL SUPPORTS, Egypt, January 4-6, 2004 Shalaby and Saitou 78 This paper proposes a solution to prevent the buckling

  11. Reformulated Gasoline Sales to End Users Prices

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets160Product:7a.CORPORATIONReformulated

  12. Preliminary Economics for the Production of Pyrolysis Oil from Lignin in a Cellulosic Ethanol Biorefinery

    SciTech Connect (OSTI)

    Jones, Susanne B.; Zhu, Yunhua

    2009-04-01

    Cellulosic ethanol biorefinery economics can be potentially improved by converting by-product lignin into high valued products. Cellulosic biomass is composed mainly of cellulose, hemicellulose and lignin. In a cellulosic ethanol biorefinery, cellulose and hemicellullose are converted to ethanol via fermentation. The raw lignin portion is the partially dewatered stream that is separated from the product ethanol and contains lignin, unconverted feed and other by-products. It can be burned as fuel for the plant or can be diverted into higher-value products. One such higher-valued product is pyrolysis oil, a fuel that can be further upgraded into motor gasoline fuels. While pyrolysis of pure lignin is not a good source of pyrolysis liquids, raw lignin containing unconverted feed and by-products may have potential as a feedstock. This report considers only the production of the pyrolysis oil and does not estimate the cost of upgrading that oil into synthetic crude oil or finished gasoline and diesel. A techno-economic analysis for the production of pyrolysis oil from raw lignin was conducted. comparing two cellulosic ethanol fermentation based biorefineries. The base case is the NREL 2002 cellulosic ethanol design report case where 2000 MTPD of corn stover is fermented to ethanol (NREL 2002). In the base case, lignin is separated from the ethanol product, dewatered, and burned to produce steam and power. The alternate case considered in this report dries the lignin, and then uses fast pyrolysis to generate a bio-oil product. Steam and power are generated in this alternate case by burning some of the corn stover feed, rather than fermenting it. This reduces the annual ethanol production rate from 69 to 54 million gallons/year. Assuming a pyrolysis oil value similar to Btu-adjusted residual oil, the estimated ethanol selling price ranges from $1.40 to $1.48 (2007 $) depending upon the yield of pyrolysis oil. This is considerably above the target minimum ethanol selling price of $1.33 for the 2012 goal case process as reported in the 2007 State of Technology Model (NREL 2008). Hence, pyrolysis oil does not appear to be an economically attractive product in this scenario. Further research regarding fast pyrolysis of raw lignin from a cellulosic plant as an end product is not recommended. Other processes, such as high-pressure liquefaction or wet gasification, and higher value products, such as gasoline and diesel from fast pyrolysis oil should be considered in future studies.

  13. Advanced turbine systems program conceptual design and product development. Quarterly report, August--October 1995

    SciTech Connect (OSTI)

    1996-01-01

    This report describes the tasks completed for the advanced turbine systems program. The topics of the report include last row turbine blade development, single crystal blade casting development, ceramic materials development, combustion cylinder flow mapping, shroud film cooling, directional solidified valve development, shrouded blade cooling, closed-loop steam cooling, active tip clearance control, flow visualization tests, combustion noise investigation, TBC field testing, catalytic combustion development, optical diagnostics probe development, serpentine channel cooling tests, brush seal development, high efficiency compressor design, advanced air sealing development, advanced coating development, single crystal blade development, Ni-based disc forging development, and steam cooling effects on materials.

  14. The production-assembly-distribution system design problem: modeling and solution approaches 

    E-Print Network [OSTI]

    Liang, Dong

    2009-05-15

    used to make p ( 2 p ). Similarly, material flows are always transferred from facility 1 f to facility f and then to facility 2 f ; that is, ____________ *Part of this section is reprinted with permission from Wilhelm, W. E., D. Liang, B. R. T.... Vasudeva, D. Warrier, X. Zhu, S. Bulusu (2005) Design of international assembly sys- tems and their supply chains under NAFTA. Transportation Research Part E, 41, 467- 493. doi:10.1016/j.tre.2005.06.002 21 the corresponding facility relationship 12 f ff...

  15. Production

    Broader source: Energy.gov [DOE]

    Algae production R&D focuses on exploring resource use and availability, algal biomass development and improvements, characterizing algal biomass components, and the ecology and engineering of cultivation systems.

  16. Design manual for management of solid by-products from advanced coal technologies

    SciTech Connect (OSTI)

    1994-10-01

    Developing coal conversion technologies face major obstacles in byproduct management. This project has developed several management strategies based on field trials of small-scale landfills in an earlier phase of the project, as well as on published/unpublished sources detailing regulatory issues, current industry practice, and reuse opportunities. Field testing, which forms the basis for several of the disposal alternatives presented in this design manual, was limited to byproducts from Ca-based dry SO{sub 2} control technologies, circulating fluidized bed combustion ash, and bubbling bed fluidized bed combustion ash. Data on byproducts from other advanced coal technologies and on reuse opportunities are drawn from other sources (citations following Chapter 3). Field results from the 5 test cases examined under this project, together with results from other ongoing research, provide a basis for predictive modeling of long-term performance of some advanced coal byproducts on exposure to ambient environment. This manual is intended to provide a reference database and development plan for designing, permitting, and operating facilities where advanced coal technology byproducts are managed.

  17. Theoretical Design of a Thermosyphon for Efficient Process Heat Removal from Next Generation Nuclear Plant (NGNP) for Production of Hydrogen

    SciTech Connect (OSTI)

    Piyush Sabharwall; Fred Gunnerson; Akira Tokuhiro; Vivek Utgiker; Kevan Weaver; Steven Sherman

    2007-10-01

    The work reported here is the preliminary analysis of two-phase Thermosyphon heat transfer performance with various alkali metals. Thermosyphon is a device for transporting heat from one point to another with quite extraordinary properties. Heat transport occurs via evaporation and condensation, and the heat transport fluid is re-circulated by gravitational force. With this mode of heat transfer, the thermosyphon has the capability to transport heat at high rates over appreciable distances, virtually isothermally and without any requirement for external pumping devices. For process heat, intermediate heat exchangers (IHX) are required to transfer heat from the NGNP to the hydrogen plant in the most efficient way possible. The production of power at higher efficiency using Brayton Cycle, and hydrogen production requires both heat at higher temperatures (up to 1000oC) and high effectiveness compact heat exchangers to transfer heat to either the power or process cycle. The purpose for selecting a compact heat exchanger is to maximize the heat transfer surface area per volume of heat exchanger; this has the benefit of reducing heat exchanger size and heat losses. The IHX design requirements are governed by the allowable temperature drop between the outlet of the NGNP (900oC, based on the current capabilities of NGNP), and the temperatures in the hydrogen production plant. Spiral Heat Exchangers (SHE’s) have superior heat transfer characteristics, and are less susceptible to fouling. Further, heat losses to surroundings are minimized because of its compact configuration. SHEs have never been examined for phase-change heat transfer applications. The research presented provides useful information for thermosyphon design and Spiral Heat Exchanger.

  18. Fractional distillation of natural gasoline by means of a modified Podbielniak apparatus 

    E-Print Network [OSTI]

    Toombs, Alfred John Lawrence

    1939-01-01

    in4ebte4 to the Humble Oil an4 Hefiaing Company for supplying hia with the samples of stabiline4 natural gasolines whish were analgas4 Isbre410t iea ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 1 I. Deeeriytiaa ot Apyazebue . II. Proeedere . 1T... pxeotionation of a 84. 2 Roid Vapor Pxoeeuro Watuxal Gasoline, Coiuan Uheoaled ~ . ~ . ~ ~ . ~ . . ~ ~ . 50 VII. Data Obtained in tho prost%enation of a 84. 1 Eei4 Vapor Pressure Natural Gasoline, Caiman Cooled . . . . . . . . . 51 VXII Data Obtained...

  19. Design, Development and Operational Experience of Demonstration Facility for Cs-137 Source Pencil Production at Trombay - 13283

    SciTech Connect (OSTI)

    Patil, S.B.; Srivastava, P.; Mishra, S.K.; Khan, S.S.; Nair, K.N.S.

    2013-07-01

    Radioactive waste management is a vital aspect of any nuclear program. The commercial feasibility of the nuclear program largely depends on the efficiency of the waste management techniques. One of such techniques is the separation of high yield radio-nuclides from the waste and making it suitable for medical and industrial applications. This will give societal benefit in addition to revenue generation. Co-60, the isotope presently being used for medical applications, needs frequent replacement because of its short half life. Cs-137, the major constituent of the nuclear waste, is a suitable substitute for Co-60 as a radioactive source because of its longer half life (28 years). Indian nuclear waste management program has given special emphasis on utilization of Cs-137 for such applications. In view of this a demonstration facility has been designed for vitrification of Cs-137 in borosilicate glass, cast in stainless steel pencils, to be used as source pencils of 300 Ci strength for blood irradiation. An induction heated metallic melter of suitable capacity has been custom designed for the application and employed for the Cs-137 pencil fabrication facility. This article describes various systems, design features, experiments and resulting modifications, observations and remote handling features necessary for the actual operation of such facility. The layout of the facility has been planned in such a way that the same can be adopted in a hot cell for commercial production of source pencils. (authors)

  20. Advanced Turbine Systems program conceptual design and product development. Quarterly report, February--April 1994

    SciTech Connect (OSTI)

    1995-02-01

    Task 8.5 (active clearance control) was replaced with a test of the 2600F prototype turbine (Task 8.1T). Test 8.1B (Build/Teardown of prototype turbine) was added. Tasks 4 (conversion of gas-fired turbine to coal-fired turbine) and 5 (market study) were kicked off in February. Task 6 (conceptual design) was also initiated. Task 8.1 (advanced cooling technology) now has an approved test plan. Task 8.4 (ultra low NOx combustion technology) has completed the code development and background gathering phase. Task 8.6 (two-phase cooling of turbine vanes) is proceeding well; initial estimates indicate that nearly 2/3 of required cooling flow can be eliminated.