Powered by Deep Web Technologies
Note: This page contains sample records for the topic "gas rig counts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

U. S. rig count drops below 600, a post-1940 low  

SciTech Connect (OSTI)

This paper reports that the Baker Hughes Inc. count of active U.S. rotary rigs as of June 12 fell to less than 600 the first time since that tally began in 1940. The previous modern record low was set at 610 the previous week. Baker Hughes reported about 1,400 rigs idle in the U.S. last week. Using a different criteria, the Smith International count of U.S. active rigs fell seven units to 653 the week ended June 12, compared with a count of 910 the previous year. Baker Hughes predecessor Hughes Tool Co. began keeping monthly records of active U.S. rigs in January 1940. The lowest monthly count that year was 857. It changed to a weekly count in January 1949. The milestone was met wit calls for relief for the U.S. upstream sector from industry and government officials in Washington.

Not Available

1992-06-22T23:59:59.000Z

2

42nd Annual Reed rig census  

SciTech Connect (OSTI)

The eleven-year trend of attrition in the US rig fleet slowed significantly this year as only 12 rigs, or less than 1%, left the available fleet. The number of rotary rigs available for drilling in the US now stands at 1,841. but for the 42-year history of the Reed Tool Co. Rotary Rig Census, the 1973 available rig count of 1,767 remains the record low for yet another year. The count of rigs active during the 45-day census period also declined since last year's census. The active count was down 4.5% to 1,221 from 1,279 in 1993. As a consequence, rig utilization fell to 66.3% in 1994, from 69.0% last year. Notably, a strong shift to gas from oil drilling has occurred. Of the 1,221 rigs active in the census period, 540 were drilling for gas on the last well vs. 356 drilling for oil. Compared to last year, this is an increase in gas drilling of 29% and a decrease in oil drilling 22%. (Rigs targeting both oil and gas totaled 325 in 1994.)

Stokes, T.A.; Rodriquez, M.R. (Reed Tool Co., Houston, TX (United States))

1994-10-01T23:59:59.000Z

3

The Feasibility of Natural Gas as a Fuel Source for Modern Land-Based Drilling Rigs  

E-Print Network [OSTI]

The purpose of this study is to determine the feasibility of replacing diesel with natural gas as a fuel source for modern drilling rigs. More specifically, this thesis (1) establishes a control baseline by examining operational characteristics...

Nunn, Andrew Howard

2012-02-14T23:59:59.000Z

4

Gas Filled Detectors counting & tracking of  

E-Print Network [OSTI]

Gas Filled Detectors counting & tracking of particles energy loss generation of electron-ion+ pairs #12;Gas Filled Detectors Primary and Total Ionization fast charged particles ionize the atoms of a gas fraction of resulting primary electrons have enough kinetic energy to ionize other atoms #12;Gas Filled

Peletier, Reynier

5

Continuous injection of an inert gas through a drill rig for drilling into potentially hazardous areas  

DOE Patents [OSTI]

A drill rig for drilling in potentially hazardous areas includes a drill having conventional features such as a frame, a gear motor, gear box, and a drive. A hollow rotating shaft projects through the drive and frame. An auger, connected to the shaft is provided with a multiplicity of holes. An inert gas is supplied to the hollow shaft and directed from the rotating shaft to the holes in the auger. The inert gas flows down the hollow shaft, and then down the hollow auger and out through the holes in the bottom of the auger into the potentially hazardous area. 3 figs.

McCormick, S.H.; Pigott, W.R.

1997-12-30T23:59:59.000Z

6

Continuous injection of an inert gas through a drill rig for drilling into potentially hazardous areas  

DOE Patents [OSTI]

A drill rig for drilling in potentially hazardous areas includes a drill having conventional features such as a frame, a gear motor, gear box, and a drive. A hollow rotating shaft projects through the drive and frame. An auger, connected to the shaft is provided with a multiplicity of holes. An inert gas is supplied to the hollow shaft and directed from the rotating shaft to the holes in the auger. The inert gas flows down the hollow shaft, and then down the hollow auger and out through the holes in the bottom of the auger into the potentially hazardous area.

McCormick, Steve H. (Idaho Falls, ID); Pigott, William R. (Idaho Falls, ID)

1997-01-01T23:59:59.000Z

7

Continuous injection of an inert gas through a drill rig for drilling into potentially hazardous areas  

SciTech Connect (OSTI)

A drill rig for drilling in potentially hazardous areas includes a drill having conventional features such as a frame, a gear motor, gear box, and a drive. A hollow rotating shaft projects through the drive and frame. An auger, connected to the shaft is provided with a multiplicity of holes. An inert gas is supplied to the hollow shaft and directed from the rotating shaft to the holes in the auger. The inert gas flows down the hollow shaft, and then down the hollow auger, and out through the holes in the bottom of the auger into the potentially hazardous area.

McCormick, S.H.; Pigott, W.R.

1998-04-01T23:59:59.000Z

8

39th annual Reed rig census  

SciTech Connect (OSTI)

This paper reports on cutbacks in U.S. exploration and development drilling during the first half of 1991 which squeezed most of the optimism out of the drilling industry. Just how rough the year has been is underscored by the results of this year's rig census. The number of rotary rigs available for U.S. drilling declined by only 69 units (3%) during the past 12 months. But despite those withdrawals from competition, only 66% of the remaining rigs were working at the time the census was taken. Results of the 1991 census contrasted sharply with the stability and optimism that seemed apparent a year ago when 72% of the available rig fleet met the census definition of active. At that time, the mini-boom in horizontal drilling coupled with tax-credit- driven gas drilling led to a relatively high rig utilization rate and suggested that rig supply and demand might be close to an economically acceptable balance. However, it quickly became apparent in early 1991 that industry optimism was unjustified. Horizontal drilling began to drop and the lowest natural gas prices in 12 years triggered rapid declines in gas drilling. Although oil prices have been relatively stable and above $18 per bbl since January 1989, most major operators have concluded that a better return on investment can be had outside the U.S. and have drastically cut their domestic drilling budgets. These factors, combined with softened energy demand from the worldwide recession, further slowed U.S. drilling. The long awaited balance between rig supply and demand has seemingly slipped away. The 1991 Reed rig census describes an industry facing several more rough years. Details of this year's census include: The available U.S. fleet now stands at 2,251 rigs, down by 69 from the 2,320-unit total in 1990, and the lowest since 1976. Rigs meeting the census definition of active numbered 1,485, down 192 (11.4%) from the 1,677 active rigs counted a year earlier.

Crowhurst, M.E.; Fitts, R.L. (Reed Tool Co., Houston, TX (US))

1991-10-01T23:59:59.000Z

9

www.myresources.com.au OIL & GAS BULLETIN VOL. 15, NO. 11 PAGE 9 Safety first: Oil rigs off the north west shelf will be studied for  

E-Print Network [OSTI]

www.myresources.com.au OIL & GAS BULLETIN VOL. 15, NO. 11 PAGE 9 NEWS Safety first: Oil rigs off that as times and trends change, tight gas and shale gas is being more and more considered as a potentially prices rise, and a shift from coal to gas energy sources is experienced, tight gas and shale gas is now

10

34th annual reed rotary rig census  

SciTech Connect (OSTI)

This article reports that the number of rigs active according to the 1986 census is 1052, which represents a decline of 1573 rigs from 1985 figures. This 60 percent decrease is the largest decline of active rigs in the 34-year history of the census. The 1986 census takers found 3993 rigs are available with the capacity to drill deeper than 3000 ft. The count has thus declined by 416 rigs (9 percent) from the 1985 total of 4409. Rig availability declined for the fourth consecutive year following nine straight years of fleet expansion (1974-1982). During the past four years, 1651 rigs have been removed from the drilling fleet representing a 29 percent decline from the record high number of rigs available in 1982. The 1986 decline in the available U.S. fleet is considerably less than what many industry observers had been anticipating. A larger decrease in the rig fleet has not been realized for a number of reasons.

Hutchinson, D.L.; Pastusek, P.E.

1986-10-01T23:59:59.000Z

11

44. Annual Reed rig census  

SciTech Connect (OSTI)

Reed Tool Company`s 44th annual rotary rig census found a spirit of increased optimism in the US oil and gas drilling industry. Rig utilization rose to 77% this year, the highest since the boom times of 15 years ago. A combination of a higher number of active rigs and another decline in available units to a historical low, led to this higher-than-average utilization rate. The paper discusses results from the survey.

Stokes, T.A.; Rodriguez, M.R. [Reed Tool Co., Houston, TX (United States)

1996-10-01T23:59:59.000Z

12

36th annual Reed rig census  

SciTech Connect (OSTI)

For the sixth straight year, the number of rigs available in the U.S. declined. Five hundred and seventy-nine rotary rigs dropped out of drilling industry competition during the past 12 months as attrition forced rig supply closer toward balance with demand. Significant highlights of this year's census are: The U.S. rig fleet now stands at 2,752 drilling rigs, a 17.4% reduction from the census count in 1987. This is the largest percentage decline and the third largest absolute decline in available rigs in census history; The 1988 census active count was 1,532 rigs, up 10% over 1987; The 1988 census utilization rate was 55.7%, up from the 41.7% reported last year and a 110% improvement over the all-time low of 26.3% in 1986; Every region in the country reported a reduction in total available rigs. Each region also reported an increase in the active ring count with the exception of Ark-La-Tex; California had the highest utilization rate in the census (63.9%), and all regions reported a utilization rate greater than 50% with the exception of Ark-La-Tex, which reported a 45.5% rate; The number of rig owners declined 12% from 691 to 608. The decline in available rigs would have been greater, but owners brought back 226 rigs that had been dropped from previous census tabulations.

Fitts, R.L.; Crowhurst, M.E. (Reed Tool Co., Houston, TX (US))

1988-10-01T23:59:59.000Z

13

Advanced industrial gas turbine technology readiness demonstration program. Phase II. Final report: compressor rig fabrication assembly and test  

SciTech Connect (OSTI)

The results of a component technology demonstration program to fabricate, assemble and test an advanced axial/centrifugal compressor are presented. This work was conducted to demonstrate the utilization of advanced aircraft gas turbine cooling and high pressure compressor technology to improve the performance and reliability of future industrial gas turbines. Specific objectives of the compressor component testing were to demonstrate 18:1 pressure ratio on a single spool at 90% polytropic efficiency with 80% fewer airfoils as compared to current industrial gas turbine compressors. The compressor design configuration utilizes low aspect ratio/highly-loaded axial compressor blading combined with a centrifugal backend stage to achieve the 18:1 design pressure ratio in only 7 stages and 281 axial compressor airfoils. Initial testing of the compressor test rig was conducted with a vaneless centrifugal stage diffuser to allow documentation of the axial compressor performance. Peak design speed axial compressor performance demonstrated was 91.8% polytropic efficiency at 6.5:1 pressure ratio. Subsequent documentation of the combined axial/centrifugal performance with a centrifugal stage pipe diffuser resulted in the demonstration of 91.5% polytropic efficiency and 14% stall margin at the 18:1 overall compressor design pressure ratio. The demonstrated performance not only exceeded the contract performance goals, but also represents the highest known demonstrated compressor performance in this pressure ratio and flow class. The performance demonstrated is particularly significant in that it was accomplished at airfoil loading levels approximately 15% higher than that of current production engine compressor designs. The test results provide conclusive verification of the advanced low aspect ratio axial compressor and centrifugal stage technologies utilized.

Schweitzer, J. K.; Smith, J. D.

1981-03-01T23:59:59.000Z

14

U.S. Offshore Crude Oil and Natural Gas Rotary Rigs in Operation (Number of  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelinesProved ReservesFeet)per Thousand28 198 18Biomass Gas (Million CubicTotal(Billion

15

U.S. Onshore Crude Oil and Natural Gas Rotary Rigs in Operation (Number of  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelinesProved ReservesFeet)per Thousand28 198 18Biomass Gas (MillionElements) Decade

16

Rig activity; 1989 was the worst year on record  

SciTech Connect (OSTI)

This article discusses the quantity of oil rotary rigs running in the United States during 1989. Rotary rigs running in 1989 averaged 870, down 7.1% from 1988 and arguably the worst performance since anyone bothered to count. A quick check into dusty historical records reveals that in 1942 the rotary rig count averaged 761 (this was the result of a deliberate government policy of scaling back drilling). However, the number is misleading, because in the early 1940s cable-tool rigs were around 40% to 45% of the total operating at any given time.

Not Available

1990-02-01T23:59:59.000Z

17

Hoisting & Rigging Lift Plan  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Plan Stanford Synchrotron Radiation Laboratory May 16, 2005 SSRL-HRLP-000-R0 Page 3 of 3 Guidelines for Generating a Rigging Sketch The lift plan required a rigging sketch or...

18

Four rigs refurbished for West Africa drilling  

SciTech Connect (OSTI)

In April and May 1990, Shell Petroleum Development Co. of Nigeria Ltd. awarded Noble Drilling West Africa Inc. four separate contracts to drill oil and gas wells in the inland waterways of Nigeria. The contracted rigs included a shallow water jack up, the NN-1, and three posted barges, the Gene Rosser, the Chuck Syring, and the Lewis Dugger. The jack up was built in 1978, and the three posted barges are 1980s vintage. Three of the rigs have been idle for a number of years. The Shell Nigeria contracts required major modifications to the rigs before putting them into international service. Noble replaced or refurbished all major pieces of equipment in the drilling, power, and service systems on the rigs. Rig crews serviced all other equipment. A significant amount of general service piping and electrical wiring was replaced. Each rig also required additional motor control centers to support the new drilling and mud processing equipment. Alfa-Laval waste-heat water desalination plants and new sewage treatment units were installed on all four rigs. Because of the tidal variances and high silt conditions expected in the African waterways, all engine cooling systems were converted from heat exchangers to radiators. Rotary tables were made common on all rigs at 37 1/2 in. Noble had all traveling equipment completely inspected and modified as necessary. Strict attention was paid to certification and documentation of all equipment. Safety upgrades conformed to both Shell and Noble standards. Fire and gas detection systems were installed throughout each rig. Water and foam deluge systems were installed in the wellhead areas, and new foam systems and monitors were installed on the helldecks.

Not Available

1991-06-10T23:59:59.000Z

19

Hoisting & Rigging Assessment Form  

Broader source: Energy.gov [DOE]

  Assess the institutional and department/division hoisting and rigging (including forklift, overhead cranes small hoists, and mobile cranes) requirements, policies, procedures, and work practices...

20

Rig activity; 1991 is now the worst year on record  

SciTech Connect (OSTI)

This paper reports that U.S. rotary oil well drilling rig activity reached year-end levels above 1,100 rigs and averaged over 1,000 in 1990, the first increase since 1984. In 1991, however, operating rigs dropped once again, this time to an all time recorded low and once again, most forecasters erred on the high side. Rotary rigs running in 1991 averaged 862.8, a 14.4% drop below the 1990 activity level of 1007.8 rigs. The rig count, began at 1,068 in January, but fell steadily for the remainder of the year. A brief upturn at mid-year failed to hold up and the year-end increases in drilling we had come to expect since 1986 never materialized.

Not Available

1992-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "gas rig counts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

40th annual Reed rig census  

SciTech Connect (OSTI)

This paper reports that declines characterize the 1992 rig census-in the number of available drilling rigs, in the number of active rigs, in rig utilization rate, in the number of rig owners and in industry optimism. The number of rotary rigs available for U.S. drilling fell by 255 units (11.3%) during the past 12 months, an attrition rate almost four times greater than in 1991. But despite the high attrition, only 59.7% of remaining rigs were working during the time the census was taken. Results of the 1992 census bring emphasis to an industry trend that became apparent in early 1991. The major oil companies, and many independents, continued their exodus form the U.S., and the remaining independents, which were hurt by low natural gas prices and unfavorable tax treatment of intangible drilling costs, were not able to pick u the drilling slack. Consequently, the past year has been disastrous for many U.S. drilling contractors, and the outlook for this industry segment remains bleak.

Fitts, R.L.; Stokes, T.A. (Reed Tool Co., Houston, TX (United States))

1992-10-01T23:59:59.000Z

22

International land rig locator  

SciTech Connect (OSTI)

Mechanical specifications, ratings, locations, and status are listed for each of the 5,000 contract rotary drilling rigs operated by the more than 700 independent drilling contractors throughout the Free World.

Not Available

1984-03-01T23:59:59.000Z

23

International land rig locator  

SciTech Connect (OSTI)

Mechanical specifications, ratings, locations, and status are listed for each of the 5,000 contract rotary drilling rigs operated by more than 700 independent drilling contractors throughout the Free World.

Not Available

1983-09-01T23:59:59.000Z

24

Advanced Hot Section Materials and Coatings Test Rig  

SciTech Connect (OSTI)

Phase I of the Hyperbaric Advanced Hot Section Materials & Coating Test Rig Program has been successfully completed. Florida Turbine Technologies has designed and planned the implementation of a laboratory rig capable of simulating the hot gas path conditions of coal gas fired industrial gas turbine engines. Potential uses of this rig include investigations into environmental attack of turbine materials and coatings exposed to syngas, erosion, and thermal-mechanical fatigue. The principle activities during Phase 1 of this project included providing several conceptual designs for the test section, evaluating various syngas-fueled rig combustor concepts, comparing the various test section concepts and then selecting a configuration for detail design. Conceptual definition and requirements of auxiliary systems and facilities were also prepared. Implementation planning also progressed, with schedules prepared and future project milestones defined. The results of these tasks continue to show rig feasibility, both technically and economically.

Dan Davis

2006-09-30T23:59:59.000Z

25

The Oil and Gas Journal databook, 1986 edition  

SciTech Connect (OSTI)

This annual contains the following: Foreword by Gene Kinney; OGJ 400; Crude Oil Assays; Worldwide Petrochemical Survey; Midyear Forecast and Review; Worldwide Gas Processing Report; Ethylene Report; Sulfur Survey; International Refining; Catalyst Compilation; Pipeline Economics Report; Worldwide Production and Refining Report; Annual Refining Survey; Morgan Pipeline Cost Index, Oil and Gas; Nelson Cost Index; Hughes Rig Count; Smith Rig Count; OGJ Production Report and the API Refinery Reports. Also featured is the Oil and Gas Journal Index, which lists every article published in the Journal in 1985, referenced by article title or subject.

Not Available

1986-01-01T23:59:59.000Z

26

Field Demonstraton of Existing Microhole Coiled Tubing Rig (MCTR) Technology  

SciTech Connect (OSTI)

The performance of an advanced Microhole Coiled Tubing Rig (MCTR) has been measured in the field during the drilling of 25 test wells in the Niobrara formation of Western Kansas and Eastern Colorado. The coiled tubing (CT) rig designed, built and operated by Advanced Drilling Technologies (ADT), was documented in its performance by GTI staff in the course of drilling wells ranging in depth from 500 to nearly 3,000 feet. Access to well sites in the Niobrara for documenting CT rig performance was provided by Rosewood Resources of Arlington, VA. The ADT CT rig was selected for field performance evaluation because it is one of the most advanced commercial CT rig designs that demonstrate a high degree of process integration and ease of set-up and operation. Employing an information collection protocol, data was collected from the ADT CT rig during 25 drilling events that encompassed a wide range of depths and drilling conditions in the Niobrara. Information collected included time-function data, selected parametric information indicating CT rig operational conditions, staffing levels, and field observations of the CT rig in each phase of operation, from rig up to rig down. The data obtained in this field evaluation indicates that the ADT CT rig exhibited excellent performance in the drilling and completion of more than 25 wells in the Niobrara under varied drilling depths and formation conditions. In the majority of the 25 project well drilling events, ROP values ranged between 300 and 620 feet per hour. For all but the lowest 2 wells, ROP values averaged approximately 400 feet per hour, representing an excellent drilling capability. Most wells of depths between 500 and 2,000 feet were drilled at a total functional rig time of less than 16 hours; for wells as deep at 2,500 to 3,000 feet, the total rig time for the CT unit is usually well under one day. About 40-55 percent of the functional rig time is divided evenly between drilling and casing/cementing. The balance of time is divided among the remaining four functions of rig up/rig down, logging, lay down bottomhole assembly, and pick up bottomhole assembly. Observations made during all phases of CT rig operation at each of the project well installations have verified a number of characteristics of the technology that represent advantages that can produce significant savings of 25-35 percent per well. Attributes of the CT rig performance include: (1) Excellent hole quality with hole deviation amounting to 1-2 degrees; (2) Reduced need for auxiliary equipment; (3) Efficient rig mobilization requiring only four trailers; (4) Capability of ''Zero Discharge'' operation; (5) Improved safety; and, (6) Measurement while drilling capability. In addition, commercial cost data indicates that the CT rig reduces drilling costs by 25 to 35% compared to conventional drilling technology. Widespread commercial use of the Microhole Coiled Tubing technology in the United States for onshore Lower-48 drilling has the potential of achieving substantially positive impacts in terms of savings to the industry and resource expansion. Successfully commercialized Microhole CT Rig Technology is projected to achieve cumulative savings in Lower-48 onshore drilling expenditures of approximately 6.8 billion dollars by 2025. The reduced cost of CT microhole drilling is projected to enable the development of gas resources that would not have been economic with conventional methods. Because of the reduced cost of drilling achieved with CT rig technology, it is estimated that an additional 22 Tcf of gas resource will become economic to develop. In the future, the Microhole Coiled Tubing Rig represents an important platform for the continued improvement of drilling that draws on a new generation of various technologies to achieve goals of improved drilling cost and reduced impact to the environment.

Kent Perry; Samih Batarseh; Sheriff Gowelly; Thomas Hayes

2006-05-09T23:59:59.000Z

27

The hybrid SZ power spectrum: Combining cluster counts and SZ fluctuations to probe gas physics  

E-Print Network [OSTI]

Sunyaev-Zeldovich (SZ) effect from a cosmological distribution of clusters carry information on the underlying cosmology as well as the cluster gas physics. In order to study either cosmology or clusters one needs to break the degeneracies between the two. We present a toy model showing how complementary informations from SZ power spectrum and the SZ flux counts, both obtained from upcoming SZ cluster surveys, can be used to mitigate the strong cosmological influence (especially that of sigma_8) on the SZ fluctuations. Once the strong dependence of the cluster SZ power spectrum on sigma_8 is diluted, the cluster power spectrum can be used as a tool in studying cluster gas structure and evolution. The method relies on the ability to write the Poisson contribution to the SZ power spectrum in terms the observed SZ flux counts. We test the toy model by applying the idea to simulations of SZ surveys.

J. M. Diego; Subhabrata Majumdar

2004-02-18T23:59:59.000Z

28

Design of a bicycle rig  

E-Print Network [OSTI]

A design of a bicycle (bike) rig was conducted. This bike rig is designed to be used for aerodynamics measurement testing of bicycles, cyclists and cycling related items in a wind tunnel. This paper discusses the design ...

Racz, Rastislav

2010-01-01T23:59:59.000Z

29

Odessa fabricator builds rig specifically for geothermal drilling...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

in the nation's oil and gas fields. Now the Odessa-based company is branching out into alternative energy. The company recently delivered its first Thermal Single rig, a...

30

The oil and gas journal databook, 1991 edition  

SciTech Connect (OSTI)

This book provides the statistical year in review plus selected articles that cover significant events of the past year. In addition, the Data Book features the popular surveys and special reports that quantify industry activity throughout the year. This book contains information on Midyear forecast and review; Worldwide gas processing report; Ethylene report; Sulfur survey; International refining survey; Nelson cost index; Smith rig count; API refinery report; API imports of crude and products; The catalyst compilation; Annual refining survey; Worldwide construction report; Pipeline economics report; Worldwide production and refining report; Morgan pipeline cost index for oil and gas; Hughes rig count; OBJ production report.

Not Available

1991-01-01T23:59:59.000Z

31

New depths with mobile rig  

SciTech Connect (OSTI)

Magee-Poole Drilling Company, a drilling contractor operating out of the south Texas drilling center of Alice, claims it operates the largest mobile drilling rig in the world. That is, it's the only wheel mounted portable rig that drills to 16,000 feet with 4 1/2-inch drill pipe - at least 3000 feet deeper than the previous mobile drilling rig ratings. The unit is designated the Ingersoll-Rand 1500 Series. What's more significant, according to co-owner Don Magee, is that the rig's portability gets the rotary table turning to the right sooner; it drills more footage per year. It rigs up in 1 1/2 days versus 3 to 4 days for a conventional skid type rig normally used at these depths. The unit's compact arrangement, with more components combined into single loads, makes possible its higher mobility. A conventional skid rig might require 25 to 30 truckloads to move the rig components, mud system, fuel and water tank, houses for utilities, storage and crew change, generators, and drill pipe. The new rig moves in anywhere from four to nine loads less. Further, the rig components weigh less without sacrificing durability.

Not Available

1982-03-01T23:59:59.000Z

32

Hoisting & Rigging ISMS Assessment Form  

Broader source: Energy.gov (indexed) [DOE]

that provide a foundation for effectively integrating safety into hoisting and rigging operations. Conduct interviews with managerssupervisors and workers to determine their...

33

rig_specs.indd  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched5 Industrial Carbon CaptureFY08 Joint JOULECorrectiveResearchrfryRIG SPECIFICATIONS R

34

Comparing rig power transmission systems  

SciTech Connect (OSTI)

Installed power on drilling rigs has increased steadily since the inception of rotary drilling technology as a result of technical advances and the need to penetrate deeper horizons. Higher power levels for the pumps, rotary table and drawworks are also required for drilling deep wells within an economically reasonable period. Power initially available on a rig had been about 35 kW on average, whereas power values on modern rigs drilling ultra-deep wells are on the order of several thousand kW. The installed power values on modern drilling rigs, subdivided with respect to depth range, are shown. After safety, economic factors are of paramount importance to rig operators. Among these, which include low acquisition cost, long service life and ease of maintenance, a particularly decisive factor is high efficiency.

Gutsche, W.; Noevig, T.

1989-04-01T23:59:59.000Z

35

Oil and gas journal databook, 1987 edition  

SciTech Connect (OSTI)

This book is an annual compendium of surveys and special reports reviewed by experts. The 1987 edition opens with a forward by Gene Kinney, co-publisher of the Oil and Gas Journal and includes the OGJ 400 Report, Crude Oil Assays, Worldwide Petrochemical Survey, the Midyear Forecast and Reviews, the Worldwide Gas Processing Report, the Ethylene Report, Sulfur Survey, the International Refining, Catalyst Compilation, Annual Refining Survey, Worldwide Construction Report, Pipeline Economics Report, Worldwide Production and Refining Report, the Morgan Pipeline Cost Index for Oil and Gas, the Nelson Cost Index, the Hughes Rig Count, the Smith Rig Count, the OGJ Production Report, the API Refinery Report, API Crude and Product Stocks, APU Imports of Crude and Products, and the complete Oil and Gas Journal 1986 Index of articles.

Not Available

1987-01-01T23:59:59.000Z

36

Hoisting and Rigging (Formerly Hoisting and Rigging Manual)  

SciTech Connect (OSTI)

This standard is intended as a reference document to be used by supervisors, line managers, safety personnel, equipment operators, and any other personnel responsible for safety of hoisting and rigging operations at DOE sites. It quotes or paraphrases the US OSHA and ANSI requirements. It also encompasses, under one cover,hoisting and rigging requirements, codes, standards, and regulations, eliminating the need to maintain extensive (and often incomplete) libraries of hoisting and rigging standards throughout DOE. The standard occasionally goes beyond the minimum general industry standards established by OSHA and ANSI, and also delineates the more stringent requirements necessary to accomplish the complex, diversified, critical, and often hazardous hoisting and rigging work found with the DOE complex.

NONE

1995-06-01T23:59:59.000Z

37

Focus on rotary drill rigs  

SciTech Connect (OSTI)

This article discusses the drill rig, focusing on the rotary drill rigs. There are two principal drilling methods - rotary and percussion. In certain situations, percussion drilling is the most practical method, but for most applications, rotary drilling using the rotary-tricone bit with either steel-toothed cones or carbide inserts, is the common and accepted drilling technique. There are four principal reasons for a rotary drill rig: to provide power to the rotary-tricone bit; to provide air to clean the hole; to provide a life-support system for the rotary-tricone bits; and, to provide a stable and efficient platform from which to drill the hole.

Schivley, G.P. Jr.

1987-06-01T23:59:59.000Z

38

Earth drill rig  

SciTech Connect (OSTI)

This patent describes an earth drill rig wherein an upwardly and downwardly moving drill-string-turning rotary table is rotated by a kelly bar connected at its lower end to a vertical drive shaft, the kelly bar being journalled for rotation in and fixed against axial movement with respect to a drill frame assembly and the rotary table being mounted for axial movement on and along the drill frame assembly. The drill frame assembly is pivotally mounted on a vehicle on a substantially horizontal axis for pivoting between an upright position and a substantially horizontal position for transportation. The improvement described here comprises the drill frame assembly pivot axis positioned below the lower end of the kelly bar and above the upper end of the vertical drive shaft, and a universal coupling connecting the lower end of the kelly bar and the vertical drive shaft the universal coupling comprising universal joints at opposite ends of an elongated slip joint connector and connected there-by for relative axial movement but driving coupling between the universal joints. The universal joints lie generally on a circle of which the drill frame assembly pivot axis is the center. The drill frame assembly can be moved between the upright and the substantially horizontal positions without disconnecting the kelly bar from the vertical drive shaft, the kelly bar being revolvable by the drive shaft through substantially the entire range of movement of the drill frame assembly.

Rassieur, C.L.

1987-01-27T23:59:59.000Z

39

Drill rig hook  

SciTech Connect (OSTI)

A hook for suspending a pipe string or other load in a well rig, including a tubular outer body supported by a first connector structure which is attachable to a suspending line, a tubular inner body which supports a second connector structure preferably taking the form of a hook, with the inner body being received within the outer body and being yieldingly urged upwardly relative thereto by a resilient unit or assembly located within the inner body, and with a structure within the inner body bearing upwardly against and supporting the resilient assembly and attached to the first connector structure. A cam mechanism between the inner and outer bodies automatically cams the inner body to a predetermined rotary position upon upward movement, with a locking device or devices serving to retain the inner body in fixed rotary position and/or to lock the camming mechanism in a fixed position in a manner determining the rotary setting to which the inner body returns upon upward movement. The mentioned first and/or second connectors may each consist of two parts receivable within one of the tubular bodies and held in operative connecting engagement therewith by a spacer between the two parts. A link suporting member may be formed separately from the load suporting hook, to be detachable therefrom for a repair or replacement.

Zimmermann, A.

1985-02-12T23:59:59.000Z

40

E-Print Network 3.0 - advanced seal rig Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2 3 4 5 > >> Page: << < 1 2 3 4 5 > >> 41 Heat Transfer Research, 2010, Vol. 41, No. 6 Turbine Aero-Heat Transfer Studies Summary: , rotating turbine research rigs, realistic gas...

Note: This page contains sample records for the topic "gas rig counts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

45th annual Reed rig census  

SciTech Connect (OSTI)

Since 1983, Reed Tool Co.`s annual rotary rig census has reported 14 consecutive annual reductions in the U.S. rig fleet. This year, the downward trend has reversed and more rigs have been added to the available fleet than have left. Robust drilling activity has also spurred higher rig utilization in 1997. Utilization climbed to 86.9% this year, more than ten percentage points higher than a year ago and the highest since 1981. Data and trends are discussed.

Stokes, T.A.; Rodriguez, M.R. [Reed Tool Co., Houston, TX (United States)

1997-10-01T23:59:59.000Z

42

Rigged Hilbert spaces for chaotic dynamical systems  

SciTech Connect (OSTI)

We consider the problem of rigging for the Koopman operators of the Renyi and the baker maps. We show that the rigged Hilbert space for the Renyi maps has some of the properties of a strict inductive limit and give a detailed description of the rigged Hilbert space for the baker maps. {copyright} {ital 1996 American Institute of Physics.}

Suchanecki, Z. [International Solvay Institutes for Physics and Chemistry, CP 231, Campus Plaine ULB, Bd. du Triomphe, 1050 Brussels (Belgium)] [International Solvay Institutes for Physics and Chemistry, CP 231, Campus Plaine ULB, Bd. du Triomphe, 1050 Brussels (Belgium); [Hugo Steinhaus Center and Institute of Mathematics, Wrocl/aw Technical University, ul. Wybrzeze Wyspianskiego 27, 50-370 Wroclaw (Poland); Antoniou, I. [International Solvay Institutes for Physics and Chemistry, CP 231, Campus Plaine ULB, Bd. du Triomphe, 1050 Brussels (Belgium)] [International Solvay Institutes for Physics and Chemistry, CP 231, Campus Plaine ULB, Bd. du Triomphe, 1050 Brussels (Belgium); [Theoretische Natuurkunde Free University of Brussels; Tasaki, S. [International Solvay Institutes for Physics and Chemistry, CP 231, Campus Plaine ULB, Bd. du Triomphe, 1050 Brussels, Belgium and] [International Solvay Institutes for Physics and Chemistry, CP 231, Campus Plaine ULB, Bd. du Triomphe, 1050 Brussels, Belgium and; [Institute for Fundamental Chemistry 34-4 Takano Nishihiraki-cho Kyoto 606 (Japan); Bandtlow, O.F. [International Solvay Institutes for Physics and Chemistry, CP 231, Campus Plaine ULB, Bd. du Triomphe, 1050 Brussels (Belgium)] [International Solvay Institutes for Physics and Chemistry, CP 231, Campus Plaine ULB, Bd. du Triomphe, 1050 Brussels (Belgium); [Cavendish Laboratory, University of Cambridge, Madingley Road, Cambridge CB30HE (United Kingdom)

1996-11-01T23:59:59.000Z

43

Hoisting and rigging manual: Uncontrolled document  

SciTech Connect (OSTI)

This document is a draft copy of a Hoisting and Rigging Manual for the Department of Energy. The manual is divided into ten chapters. The chapter titles follow: terminology and definitions; operator training and qualification; overhead and gantry cranes; mobile cranes; forklift trucks; hoists; hooks; wire rope, slings, and rigging accessories; construction hoisting and rigging equipment requirements; references.

NONE

1991-05-01T23:59:59.000Z

44

PNNL Hoisting and Rigging Manual  

SciTech Connect (OSTI)

This manual describes the safe and cost effective operation, inspection, maintenance, and repair requirements for cranes, hoists, fork trucks, slings, rigging hardware, and hoisting equipment. It is intended to be a user's guide to requirements, codes, laws, regulations, standards, and practices that apply to Pacific Northwest National Laboratory (PNNL) and its subcontractors.

Haynie, Todd O.; Fullmer, Michael W.

2008-12-29T23:59:59.000Z

45

Scheduling Workover Rigs for Onshore Oil Production  

E-Print Network [OSTI]

Scheduling Workover Rigs for Onshore Oil. Production. Dario J. Aloise, Daniel Aloise, Caroline T.M. Rocha. Universidade Federal do Rio Grande do Norte,.

2003-06-23T23:59:59.000Z

46

Digital Pulse-Shape Discrimination Applied to an Ultra-Low-Background Gas-Proportional Counting System: First Results  

SciTech Connect (OSTI)

Abstract A new ultra-low-background proportional counter (ULBPC) design was recently developed at Pacific Northwest National Laboratory (PNNL). This design, along with an ultra-low-background counting system (ULBCS) which provides passive and active shielding with radon exclusion, has been developed to complement a new shallow underground laboratory (~30 meters water-equivalent) constructed at PNNL. After these steps to mitigate dominant backgrounds (cosmic rays, external gamma-rays, radioactivity in materials), remaining background events do not exclusively arise from ionization of the proportional counter gas. Digital pulse-shape discrimination (PSD) is thus employed to further improve measurement sensitivity. In this work, a template shape is generated for each individual sample measurement of interest, a "self-calibrating" template. Differences in event topology can also cause differences in pulse shape. In this work, the temporal region analyzed for each event is refined to maximize background discrimination while avoiding unwanted sensitivity to event topology. This digital PSD method is applied to sample and background data, and initial measurement results from a biofuel methane sample are presented in the context of low-background measurements currently being developed.

Aalseth, Craig E.; Day, Anthony R.; Fuller, Erin S.; Hoppe, Eric W.; Keillor, Martin E.; Mace, Emily K.; Myers, A. W.; Overman, Cory T.; Panisko, Mark E.; Seifert, Allen; Warren, Glen A.; Williams, Richard M.

2013-05-01T23:59:59.000Z

47

Electricity on the rig; part I -- electric applications on drilling and workover rigs  

SciTech Connect (OSTI)

This article points out that not only have electric motors replaced diesel engines and mechanical transmissions, but solid-state equipment is rapidly taking the place of rotary equipment in variable speed drivers and control systems. The SCR (silicon controlled rectifier) type of speed control has replaced other types by a large margin of acceptance on drilling rigs and has begun to be used on workover and service rigs. In most cases, electrical power is generated at the rig site with diesel-AC generators. On mechanically driven rigs, single diesel-generator sets operate to supply power for lighting and electrical motor loads. When high levels of power are required, such as on SCR-powered rigs, multiple generators are operated in electrical-parallel and each contributes to the total power required.

McNair, W.L.

1983-03-01T23:59:59.000Z

48

Department of Mechanical Engineering Dresser-Rand 1: LNG Test Rig Movable LSD Vanes  

E-Print Network [OSTI]

(LSD) vanes which can easily be incorporated into current test rigs for centrifugal gas compressors diffuser vane system would increase the efficiency of a centrifugal compressor by about 1%. The sponsor to a radial line from the compressor's center. Objectives To develop a system of movable low solidity diffuser

Demirel, Melik C.

49

Mixed Stream Test Rig (MISTER) Startup Report  

SciTech Connect (OSTI)

This report describes the work accomplished to date to design, procure, assemble, authorize, and startup the Mixed Stream Test Rig (MISTER) at the Idaho National Laboratory (INL). It describes the reasons for establishing this capability, physical configuration of the test equipment, operations methodology, initial success, and plans for completing the initial 1,000 hour test.

Charles Park

2011-02-01T23:59:59.000Z

50

Rigs to reefs: a petroleum industry perspective  

E-Print Network [OSTI]

, by implementing an ocean dumping program in conjunction with a rigs-to-reefs program, and through the development of new technology and methods to reduce transportation costs. Zn addition, the overall cost to industry participation can be reduced through... Environmental Enhancement and Fishing in the Seas (REEFS)" Task Force. This task force was comprised of representatives of federal and state government agencies, the oil and ocean industries, and the commercial and recreational fishing communities. Secretary...

Dubose, William Perry

1988-01-01T23:59:59.000Z

51

Open Rigging Through XML: Character Setup Utilizing Metadata and Node Based Editing  

E-Print Network [OSTI]

Manager. . . . . 22 7 The Rig Manager interface for an empty scene. . . . . . . . . . . . . . 23 8 The Rig Manager interface and “Rig Edit Mode” label on the viewport after clicking the “Create Rig” button. . . . . . . . . . . . . . . . . . . 24 9 The Rig... and replace them with code that performs the desired actions. For example, the node-based interface can be used to replace the task of authoring rig 6 definition files in a text editor so that the user never needs to learn the rig definition format. 7 3...

Kelly, Logan Scott

2014-02-19T23:59:59.000Z

52

DOE-STD-1090-2007; Hoisting and Rigging Standard (Formerly Hoisting...  

Broader source: Energy.gov (indexed) [DOE]

5 CONSTRUCTION HOISTING AND RIGGING EQUIPMENT REQUIREMENTS 15-i This chapter outlines the requirements for the safe use of hoisting and rigging equipment on construction projects...

53

HOISTING & RIGGING Assessment Plan--NNSA/Nevada Site Office Facility...  

Broader source: Energy.gov (indexed) [DOE]

on a scheduled basis, certifying that safe operations are in compliance with good conduct of operations. DOE-STD-1090-2001 HoistingRiggingPlan.doc More Documents &...

54

Rotating head for rotary drilling rigs  

SciTech Connect (OSTI)

A rotating head is claimed for a rotary drilling rig which is to be secured to the top of a well pipe having an inner rotating portion with an opening therethrough which permits passage of drill pipe, pipe joints, and Kelly tools; the rotating portion has an annular drive rubber formed integrally with the top portion thereof. A rotating head drive bushing having an opening with a cross-sectional shape generally conforming to the cross-section of the Kelly tool to permit only sliding motion therebetween is provided with helical external ridges which produce a disengagable gripping action with the opening in the drive rubber at the top of the rotating portion of the rotating head. The rotating portion has a conventional stripper rubber at the bottom thereof and is mounted with a double roller bearing to provide low friction motion with respect to the fixed portion of the head. The double roller bearing is lubricated with a viscous lubricating material and paddles are provided between the sets of rollers of the double roller bearing for distributing the viscous lubricating material and in particular propel it onto the upper set of bearings; the upper body portion of the rotating head is readily detachable from the lower sleeve portion which is normally welded to the well conductor pipe.

Adams, J.R.

1983-09-27T23:59:59.000Z

55

Human rigHts advocacy in action  

E-Print Network [OSTI]

in memoriam 26 2 nonesuch//Autumn 2011 Greencoat 80 Silk is carbon balanced ­ where the carbon intensity has purchased. Carbon balancing by the World Land Trust tackles climate change through projects that both offset 18 Brave new world 22 thought that counts 27 In pictures snapshots 5 taken 29 Regulars Bristol

Bristol, University of

56

Workover well control. Part 3. Conventional rigs, snubbing units handle a variety of workover jobs  

SciTech Connect (OSTI)

The conventional rig, the most widely used rig for workovers, performs several common functions: tripping in and out of the hole, rotating the work string, and circulating fluid. Its primary component groups are the derrick, hoisting systems, rotary tools, circulating systems, and tubular goods. Rig sizing depends on the job requirements; the typical workover rig is a small-capacity, single unit used for concentric work. A workover rig's most important feature is its portability; compartmentalizing the rig permits transporting it offshore in packages smaller than 8000 lb and allows small cranes to replace derrick barges for loading operations.

Adams, N.

1981-08-31T23:59:59.000Z

57

Microsoft Word - Alcoa Extension EBT ROD Attachments - 2010-10...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Administration, August 30, 2010 Figure 2 - Natural Gas Rig Count U.S. Natural Gas Rotary Rigs in Operation (Count) 0 200 400 600 800 1000 1200 1400 1600 1800 A u g - 0 6 O...

58

Background  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Administration, January 14, 2011 Figure 2 - Natural Gas Rig Count U.S. Natural Gas Rotary Rigs in Operation (Count) 0 400 800 1200 1600 2000 J a n - 0 7 M a r - 0 7 M a y -...

59

Inventory management of steel plates at an oil rig construction company .  

E-Print Network [OSTI]

??Keppel Fels produces make-to-order oil exploration rigs for the global market. Each rig requires close to 6000 metric tons of steel in the course of… (more)

Tan, Chien Yung

2006-01-01T23:59:59.000Z

60

Inventory management of steel plates at an oil rig construction company  

E-Print Network [OSTI]

Keppel Fels produces make-to-order oil exploration rigs for the global market. Each rig requires close to 6000 metric tons of steel in the course of its production. Optimal management of this steel is very critical in this ...

Tan, Chien Yung

2006-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "gas rig counts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Hoisting and Rigging: Lift Planning and Control for Ordinary Lifts  

E-Print Network [OSTI]

operator Follow specific instructions/procedures for attachment of the rigging gear to the load. Use. Repeat as necessary until the load is evenly balanced. Follow "Conduct of Operator" requirements2 Stop at the work site and follow the plan Assign a designated leader Ensure all personnel involved in the lift

Wechsler, Risa H.

62

Mixed Stream Test Rig Winter FY-2011 Report  

SciTech Connect (OSTI)

This report describes the data and analysis of the initial testing campaign of the Mixed Stream Test Rig (MISTER) at Idaho National Laboratory (INL). It describes the test specimen selection, physical configuration of the test equipment, operations methodology, and data and analysis of specimens exposed in two environments designed to represent those expected for high temperature steam electrolysis (HTSE).

Chalres Park; Tedd Lister; Kevin DeWall

2011-04-01T23:59:59.000Z

63

Quality Counts Certificate  

E-Print Network [OSTI]

This certificate accompanies the Quality Counts program. 1 page. It comes in packages of 25 certificates....

Chilek, Kevin

2007-01-31T23:59:59.000Z

64

Rotary torque and rpm indicator for oil well drilling rigs  

SciTech Connect (OSTI)

Monitoring the torque applied by the rotary table to the drill string and the rpm of the drill string is provided. An intermediate adapter is positioned between the drill kelly and the rotary table. A strain gauge is attached to the intermediate adapter to measure torsional deformation and provide an indication of rotary torque. Transmission of torque data is accomplished by radio frequency transmission utilizing a transmitter on the intermediate adapter. A receiver is mounted to the side of the drill rig floor to receive and demodulate the torque signal. The intermediate adapter is rotating at the same rate as the drill string. Detection of the revolutions utilizing the changing R.F. Field strength is accomplished at the edge of the drill rig platform or elsewhere with a stationary sensor which doubles as the torque receiver. A highly directional torque transmitter antenna mounted on the adapter is used with the major lobe lying parallel to the rig floor and perpendicular to the pipe. By detecting the envelope of the radio frequency field strength, each rotation is marked by a peak. This enables continuous torque and rpm monitoring.

Chien, L.C.

1981-08-25T23:59:59.000Z

65

CPS 8.1 Hoisting and Rigging, 2/25/2000  

Broader source: Energy.gov [DOE]

The objective of this surveillance is to examine hoisting and rigging operations to ensure that safe equipment and work practices are being used.  The surveillance includes verification that...

66

The rig of the eleventh-century ship at Serce Liman, Turkey  

E-Print Network [OSTI]

was designed for maximum cargo capacity. The hydrostatic properties of this hull were such that it probably would have retained sufficient righting ability and speed with a double-lateen rig. Thus, the proposed two-masted lateen rig for this ship would have... and Recording Procedures Off-Site Recording Procedures Preliminary Hull Reconstruction Hull Remains Ship's Gear: Anchors Ship's Gear: Rigging Elements Ship's Cargo: Date and Nationality of the Vessel 1 3 8 9 11 16 16 19 CHAPTER II. MEDIEVAL RIGS...

Matthews, Sheila Diane

1983-01-01T23:59:59.000Z

67

Drilling through gas hydrates formations: possible problems and suggested solution  

E-Print Network [OSTI]

Gas hydrate research in the last two decades has taken various directions ranging from ways to understand the safe and economical production of this enormous resource to drilling problems. as more rigs and production platforms move into deeper...

Amodu, Afolabi Ayoola

2009-05-15T23:59:59.000Z

68

Rig-site system allows water reuse, cuts cleanup costs  

SciTech Connect (OSTI)

A new well-site treatment system is described which extends the use of solids control equipment to help solve the common drilling problems of water supply and/or wastewater disposal. The new closed-loop system combines water treatment with more conventional solids handling to continuously create clean water. The results include: re-use of water for rig cleaning, mud, and even cement makeup with no need to eject liquid to the environment; greatly reduced water-input requirements; and division of the conventional wastewater pit into an active treatment operations pit and an overflow reserve pit for emergency storage.

Neidhardt, D.

1985-03-04T23:59:59.000Z

69

MHK Technologies/Ocean Energy Rig | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpIncMAKGalway Bay IEOWC < MHK Technologies Jump to:Rig < MHK

70

Technical and economic evaluation of selected compact drill rigs for drilling 10,000 foot geothermal production wells  

SciTech Connect (OSTI)

This report summarizes the investigation and evaluation of several {open_quotes}compact{close_quotes} drill rigs which could be used for drilling geothermal production wells. Use of these smaller rigs would save money by reducing mobilization costs, fuel consumption, crew sizes, and environmental impact. Advantages and disadvantages of currently-manufactured rigs are identified, and desirable characteristics for the {open_quotes}ideal{close_quotes} compact rig are defined. The report includes a detailed cost estimate of a specific rig, and an evaluation of the cost/benefit ratio of using this rig. Industry contacts for further information are given.

Huttrer, G.W. [Geothermal Management Company, Inc., Frisco, CO (United States)

1997-11-01T23:59:59.000Z

71

Safety First Safety Last Safety Always Inspect rigging equipment for material handling before use  

E-Print Network [OSTI]

Safety First Safety Last Safety Always Inspect rigging equipment for material handling before use. Rigging Equipment for Material Handling Safety Tip #19 At your job or at the plate, you can't get home on the reverse side of this safety tip sheet. Please refrain from reading the information verbatim

Minnesota, University of

72

Structural Basis of Viral RNA Recognition by RIG-I-Like Receptors  

E-Print Network [OSTI]

binding surface also abolished RIG-I signaling in cells. In order to compare the RIG-I/RNA interactions with other RLRs, we also determined the dsRNA binding surface of MDA5 CTD by NMR titration studies. MDA5 CTD has a similar binding surface...

Lu, Cheng

2012-10-19T23:59:59.000Z

73

Effects of Combustor Rig Exposure on a Porous-Matrix Oxide Composite  

E-Print Network [OSTI]

Effects of Combustor Rig Exposure on a Porous-Matrix Oxide Composite Michael A. Mattoni, James Y combustor on microstructural stability and property retention of an all-oxide fiber-reinforced ceramic combustor rig under conditions that simulate the pertinent heat loads and combustion environ- ments.11

Zok, Frank

74

The design of a test rig for the identification of dynamic coefficients of a high temperature magnetic bearing  

E-Print Network [OSTI]

This thesis is a report on the research and Micrographics. development to design a test rig for the identification of the dynamic coefficients of a radial magnetic bearing. The test rig development is intended for dynamic coefficient observation...

Rahtika, I Putu Gede Sopan

1998-01-01T23:59:59.000Z

75

New ultra-deepwater rig with dual rotaries will reduce costs  

SciTech Connect (OSTI)

The Discoverer Enterprise, a next generation, ultra-deepwater drill ship with a dual rotary system, will decrease drilling and completion costs by reducing bottom hole assembly (BHA) and tubular preparation time. Transocean Offshore received a contract from Amoco Corp. to build the ultra-deep floating rig and is scheduled to spud its first well in July 1998. It will generally work in water deeper than 6,000 ft. The rig design involves a new approach that addresses the overall well-construction process and equipment required to decrease significantly deepwater drilling time. The Discoverer is the first ultra-deepwater rig designed specifically for handling subsea completions and extended well tests. The paper discusses increased deepwater rig demand, rig construction costs, drillship design, well construction, development drilling, and cost justification.

Cole, J.C.; Herrmann, R.P.; Scott, R.J. [Transocean Offshore Inc., Houston, TX (United States); Shaughnessy, J.M. [Amoco Corp., Houston, TX (United States)

1997-05-26T23:59:59.000Z

76

Calibration and performance of a selective catalytic reduction (SCR) bench rig for NOx? emissions control  

E-Print Network [OSTI]

A laboratory test rig was designed and built to easily test SCR (Selective Catalytic Reduction) technology. Equipped with three 6 kW heaters, connections for liquid N2 and an assortment of test gases, and a connection with ...

Castro Galnares, Sebastián (Castro Galnares Wright Paz)

2008-01-01T23:59:59.000Z

77

Nucleotide sequences and modifications that determine RIG-I/RNA binding and signaling activities  

E-Print Network [OSTI]

Cytoplasmic viral RNAs with 5? triphosphates (5?ppp) are detected by the RNA helicase RIG-I, initiating downstream signaling and alpha/beta interferon (IFN-?/?) expression that establish an antiviral state. We demonstrate ...

Urzi, Dina

78

Design and analysis of a composite flywheel preload loss test rig  

E-Print Network [OSTI]

INTRODUCTION...................................................................................1 1.1 Overview.............................................................................1 1.2 Literature Review..................................................................2 1.3 Objectives and Novel Contributions...................................4 II PLM FLYWHEEL TEST RIG DESIGN................................................. 6 2.1 Design Process...

Preuss, Jason Lee

2004-09-30T23:59:59.000Z

79

Analytical and experimental investigations of a labyrinth seal test rig and damper seals for turbomachinery  

E-Print Network [OSTI]

applications is discussed. The direct damping coefficients of the shaft seals are determined experimentally by processing measured displacement vibration impact response data with an equivalent single degree of freedom model of the cantilever beam test rig...

Shultz, Richard Raymond

1997-01-01T23:59:59.000Z

80

Design, fabrication and testing of a bearing test rig and preliminary studies on oil mist lubrication  

E-Print Network [OSTI]

DESIGN, FABRICATION AND TESTING OF A BEARING TEST RIG AND PRELIMINARY STUDIES ON OIL MIST LUBRICATION A Thesis by ABDUS SHAMIM Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements... for the degree of MASTER OF SCIENCE August 1990 Major Subject: Mechanical Engineering DESIGN, FABRICATION AND TESTING OF A BEARING TEST RIG AND PRELIMINARY STUDIES ON OIL MIST LUBRICATION A Thesis by ABDUS SHAMIM Approved as to style and content by: C...

Shamim, Abdus

1990-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "gas rig counts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Design of irradiation rig for reactor testing of prototype bolometers for ITER  

SciTech Connect (OSTI)

We describe the design of an experimental rig, which was developed to allow reactor testing at relevant conditions, i.e. vacuum and {approx}400 deg.C temperature, of prototype resistive bolometers, which will be used in ITER to acquire information on the radiated power distribution from the main plasma and in the diverter region. The main feature of the design is that the rig has no active temperature control. (authors)

Gusarov, A.; Huysmans, S. [SCK.CEN Belgian Nucrear Research Center, 2400 Mol (Belgium); Meister, H. [Max-Planck-Institut fuer Plasmaphysik, Boltzmannstr. 2, D-85748 Garching b. Muenchen (Germany); Hodgson, E. [Euratom/CIEMAT Fusion Association, Avenida Complutense 22, 28040 Madrid (Spain)

2011-07-01T23:59:59.000Z

82

Fast counting electronics for neutron coincidence counting  

DOE Patents [OSTI]

An amplifier-discriminator is tailored to output a very short pulse upon an above-threshold input from a detector which may be a /sup 3/He detector. The short pulse output is stretched and energizes a light emitting diode (LED) to provide a visual output of operation and pulse detection. The short pulse is further fed to a digital section for processing and possible ORing with other like generated pulses. Finally, the output (or ORed output) is fed to a derandomizing buffer which converts the rapidly and randomly occurring pulses into synchronized and periodically spaced-apart pulses for the accurate counting thereof. Provision is also made for the internal and external disabling of each individual channel of amplifier-discriminators in an ORed plurality of same.

Swansen, J.E.

1985-03-05T23:59:59.000Z

83

Fast counting electronics for neutron coincidence counting  

DOE Patents [OSTI]

An amplifier-discriminator is tailored to output a very short pulse upon an above-threshold input from a detector which may be a .sup.3 He detector. The short pulse output is stretched and energizes a light emitting diode (LED) to provide a visual output of operation and pulse detection. The short pulse is further fed to a digital section for processing and possible ORing with other like generated pulses. Finally, the output (or ORed output ) is fed to a derandomizing buffer which converts the rapidly and randomly occurring pulses into synchronized and periodically spaced-apart pulses for the accurate counting thereof. Provision is also made for the internal and external disabling of each individual channel of amplifier-discriminators in an ORed plurality of same.

Swansen, James E. (Los Alamos, NM)

1987-01-01T23:59:59.000Z

84

Quality Counts Exhibitor Card  

E-Print Network [OSTI]

This exhibitor card identifies young livestock exhibitors as participants in the Quality Counts! program. The card is printed with a leather-style background on heavy card stock. It features the 4-H clover and the FFA logo, as well as the logo...

Chilek, Kevin; Gregory, Elizabeth

2004-01-27T23:59:59.000Z

85

TECHNICAL PAPER Design and fabrication of microchannel test rig  

E-Print Network [OSTI]

of the ultra-micro wave rotor (UlWR). 1 Introduction Ultra micro gas turbines (UlGT) is expected to be a next

Müller, Norbert

86

Controls and Measurements of KU Engine Test Cells for Biodiesel, SynGas, and Assisted Biodiesel Combustion  

E-Print Network [OSTI]

the following: University of Kansas's Feedstock-to-Tailpipe Initiative's Synthesis Gas Reforming rig, Feedstock-to-Tailpipe Initiative's Biodiesel Single Cylinder Test Stand, and a unique Reformate Assisted Biodiesel Combustion architecture. The main...

Cecrle, Eric Daniel

2011-04-06T23:59:59.000Z

87

Diverter/bop system and method for a bottom supported offshore drilling rig  

SciTech Connect (OSTI)

This patent describes a system adapted for alternative use as a diverter or a blowout preventer for a bottom supported drilling rig and adapted for positioning beneath a rotary table of the drilling rig, the system comprising: a fluid flow controller having a controller housing with a lower opening and an upper opening and a vertical flow path therebetween and an outlet passage provided in its housing wall, and at least two bases. A method is described for installing a system adapted for alternative connection as a diverter or a blowout preventer for a bottom supported drilling rig positioned beneath a rotary table of the drilling rig after structural casing has been set in a borehole. The method comprises: positioning a first telescoping spool having a lower end and an upper end below the rotary table, the first spool having a first base disposed at its upper end, the first base having a port disposed in its wall; aligning a fluid flow controller having a controller housing wall outlet passage and adapted for alternative use as a diverter or a blowout preventer so that the controller is substantially vertically aligned between a bore of the rotary table above and the structural casing below; and securing the fluid flow controller beneath the drilling rig rotary table.

Roche, J.R.; Alexander, G.G.

1987-03-03T23:59:59.000Z

88

Developmental test report, assessment of XT-70E percussion drill rig operation in tank farms  

SciTech Connect (OSTI)

The following report documents the testing of the XT-70E percussion drill rig for use in the 241-SX Tank Farm. The test is necessary to support evaluation of the safety and authorization level of the proposed activity of installing up to three new drywells in the 241- SX Tank Farm. The proposed activity plans to install drywells by percussion drilling 7 inch O.D./6 inch I.D. pipe in close proximity of underground storage tanks and associated equipment. The load transmitted from the drill rig`s percussion hammer through the ground to the tank structure and equipment is not known and therefore testing is required to ensure the activity is safe and authorized.

Dougherty, L.F., Westinghouse Hanford

1996-09-10T23:59:59.000Z

89

Test rig and particulate deposit and cleaning evaluation processes using the same  

DOE Patents [OSTI]

A rig and test program for determining the amount, if any, of contamination that will collect in the passages of a fluid flow system, such as a power plant fluid delivery system to equipment assemblies or sub-assemblies, and for establishing methods and processes for removing contamination therefrom. In the presently proposed embodiment, the rig and test programs are adapted in particular to utilize a high-pressure, high-volume water flush to remove contamination from substantially the entire fluid delivery system, both the quantity of contamination and as disposed or deposited within the system.

Schroder, Mark Stewart (Hendersonville, NC); Woodmansee, Donald Ernest (Schenectady, NY); Beadie, Douglas Frank (Greer, SC)

2002-01-01T23:59:59.000Z

90

Mode localization results and laboratory demonstration techniques with a multi-pendulum rig  

E-Print Network [OSTI]

. Perturbed system mode shapes, analytical, for R' = 0. 015. 16 Table III. Perturbed system mode shapes, analytical, for R' = 0. 04 (K, = 0. 908 N-m/rad, 1, = 0, 532 m). 17 Table IV. Perturbed system mode shapes, analytical, for R' = 0. 15 (K, = 3. 90 N.... Pendulum rig schematic Figure 2. Detail of pendulum rig. Figure 3. Graphical depiction of mode shapes given in Table I. 10 Figure 4. Depiction of perturbed mode shapes given in Table's II, III, and IV for: (a) Rs=0. 015; (b) R =0. 04; and (c) R =0. 15...

Bollich, Robert Kenneth Gerard

1992-01-01T23:59:59.000Z

91

[Outlook for 1997 in the oil and gas industries of the US  

SciTech Connect (OSTI)

This section contains 7 small articles that deal with the outlook for the following areas: US rotary rigs (Moving back up, finally); US production (Crude decline continues, gas rising); producing oil wells (Oil stays steady); producing gas wells (Well numbers up again); drilling and producing depths (New measured depths records); and US reserves (Gas reserves jump; oil dips slightly).

NONE

1997-02-01T23:59:59.000Z

92

Local Frequency Based Estimators for Anomaly Detection in Oil and Gas Applications  

E-Print Network [OSTI]

Local Frequency Based Estimators for Anomaly Detection in Oil and Gas Applications Alexander Singh industrial applications such as the smart grid and oil and gas are continuously monitored. The massive to positively impact the bottom line. In the oil and gas industry, modern oil rigs are outfitted with thousands

Slatton, Clint

93

Department of Mechanical Engineering Fall 2009 Air Products-Entrained Particle Flow Test Rig  

E-Print Network [OSTI]

PENNSTATE Department of Mechanical Engineering Fall 2009 Air Products-Entrained Particle Flow Test are causing catalyst plugging. Objectives Air Products requested that a test rig be constructed to entrain the hydrogen reforming facilities and aid Air Products in understanding the plugging problem. Approach

Demirel, Melik C.

94

AbstractThe red snapper (Lutjanus campechanus) is currently under rig  

E-Print Network [OSTI]

653 Abstract­The red snapper (Lutjanus campechanus) is currently under rig orous federal and state of annuli in otolith thin sections have been used to age many species of fish, including red snapper. However, the utility of this method for aging red snapper has been questioned by those who dispute both

95

Department of Mechanical Engineering Spring 2012 LNG Test Rig Movable LSD Vanes  

E-Print Network [OSTI]

Dresser-Rand is a major company within the centrifugal compressor industry. Gases are compressed in multistage centrifugal compressors to reduce the volume up to 400 times. At the outlet of the impeller test rigs to find the optimized angle and use it in the centrifugal compressors they produce

Demirel, Melik C.

96

A Built for Purpose Micro-Hole Coiled Tubing Rig (MCTR)  

SciTech Connect (OSTI)

This report will serve as the final report on the work performed from the contract period October 2005 thru April 2007. The project 'A Built for Purpose Microhole Coiled Tubing Rig (MCTR)' purpose was to upgrade an existing state-of-the-art Coiled Tubing Drilling Rig to a Microhole Coiled Tubing Rig (MCTR) capable of meeting the specifications and tasks of the Department of Energy. The individual tasks outlined to meet the Department of Energy's specifications are: (1) Concept and development of lubricator and tool deployment system; (2) Concept and development of process control and data acquisition; (3) Concept and development of safety and efficiency improvements; and (4) Final unit integration and testing. The end result of the MCTR upgrade has produced a unit capable of meeting the following requirements: (1) Capable of handling 1-inch through 2-3/8-inch coiled tubing (Currently dressed for 2-3/8-inch coiled tubing and capable of running up to 3-1/2-inch coiled tubing); (2) Capable of drilling and casing surface, intermediate, production and liner hole intervals; (3) Capable of drilling with coiled tubing and has all controls and installation piping for a top drive; (4) Rig is capable of running 7-5/8-inch range 2 casing; and (5) Capable of drilling 5,000 ft true vertical depth (TVD) and 6,000 ft true measured depth (TMD).

Bart Patton

2007-09-30T23:59:59.000Z

97

U.S. Offshore Crude Oil and Natural Gas Rotary Rigs in Operation (Number of  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines AboutDecemberSteamYearTexas--StateWinterYear Jan Feb MarRevision DecreasesDecade

98

U.S. Onshore Crude Oil and Natural Gas Rotary Rigs in Operation (Number of  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines AboutDecemberSteamYearTexas--StateWinterYear Jan Feb MarRevision

99

U.S. Crude Oil and Natural Gas Active Well Service Rigs in operation  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelinesProved ReservesFeet)per Thousand28 198 18 Q 10 14.0Sales (Million

100

U.S. Crude Oil and Natural Gas Rotary Rigs in Operation (Number of  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelinesProved ReservesFeet)per Thousand28 198 18 Q 10 14.0Sales (MillionElements) Decade

Note: This page contains sample records for the topic "gas rig counts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

U.S. Crude Oil and Natural Gas Active Well Service Rigs in operation  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines AboutDecemberSteamYearTexas--State OffshoreProduction Forecast- Analysis of

102

U.S. Crude Oil and Natural Gas Rotary Rigs in Operation (Number of  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines AboutDecemberSteamYearTexas--State OffshoreProduction Forecast- Analysis ofElements)

103

U.S. Natural Gas Rotary Rigs in Operation (Number of Elements)  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines AboutDecemberSteamYearTexas--StateWinterYear Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov

104

U.S. Natural Gas Rotary Rigs in Operation (Number of Elements)  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelinesProved ReservesFeet)per Thousand28 198 18

105

Fluid Inclusion Gas Analysis  

SciTech Connect (OSTI)

Fluid inclusion gas analysis for wells in various geothermal areas. Analyses used in developing fluid inclusion stratigraphy for wells and defining fluids across the geothermal fields. Each sample has mass spectrum counts for 180 chemical species.

Dilley, Lorie

2013-01-01T23:59:59.000Z

106

Fluid Inclusion Gas Analysis  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

Fluid inclusion gas analysis for wells in various geothermal areas. Analyses used in developing fluid inclusion stratigraphy for wells and defining fluids across the geothermal fields. Each sample has mass spectrum counts for 180 chemical species.

Dilley, Lorie

107

Rigging skeletal perissodactyl and artiodactyl ungulate limbs using analytic inverse kinematic-based solutions for a feature film production environment  

E-Print Network [OSTI]

The goal of this thesis is to develop and construct a repeatable, scalable, and portable rigging solution for the skeletal limbs of ungulates, maximizing functionality while streamlining intuitive interface controls for a feature film production...

Telford, William Lawrence, Jr

2007-04-25T23:59:59.000Z

108

A test rig for the identification of rotordynamic coefficients of fluid film bearings  

E-Print Network [OSTI]

. The test bearing articles were considered for cryogenic applications where the actual lubrication medium is liquid hydrogen or liquid oxygen. The parameter identification method used an advanced pseudo-random forcing excitation and a technique based...A TEST RIG FOR THE IDENTIFICATION OF ROTORDYNAMIC COEFFICIENTS OF FLUID FILM BEARINGS A Thesis LEWIS MILLER ROBISON III Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements...

Robison, Lewis Miller

1995-01-01T23:59:59.000Z

109

Diverter bop system and method for a bottom supported offshore drilling rig  

SciTech Connect (OSTI)

A system and method for installing a fluid flow controller and telescoping spools beneath an offshore bottom supported drilling rig rotary table is disclosed. Upper and lower telescoping spools are provided for initially connecting a Diverter/BOP convertible fluid flow controller between structural casing in the well and a permanent housing beneath the drilling rig rotary table. Clamp means are provided for clamping the rig vent line to an opening in the housing wall of the fluid flow controller during drilling of the borehole through the structural casing in preparation for setting and cementing the conductor casing. In that mode, the system is adapted as a diverter system. After the well is drilled for the conductor casing and the conductor casing is cemented and cut off at its top, a mandrel is fitted at the top of the conductor casing to which the lower end of the lower spool may be connected. The system may be used in this configuration as a diverter system, or after removal of the vent line and connection of a kill line to the housing outlet, the system may be used as a low pressure blowout preventer system.

Roche, J. R.; Alexander, G. G.; Carbaugh, W. L.

1985-06-25T23:59:59.000Z

110

Counting Guns in Early America  

E-Print Network [OSTI]

Bang! Historian Explodes American Gun Myths, M INN . S TAR Tat 339-40 (1994). Counting Guns in Early America, Wm. & Maryto estimate levels of gun ownership in early America. This

Lindgren, James

2002-01-01T23:59:59.000Z

111

A New Technique for Studying the Fano Factor And the Mean Energy Per Ion Pair in Counting Gases  

DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

A new method is presented for deriving the Fano factor and the mean energy per ion pair in the ultrasoft x-ray energy range. It is based on counting electrons deposited by a photon in a low-pressure gas, and is applicable for all counting gases. The energy dependence of these parameters for several hydrocarbons and gas mixtures is presented.

Pansky, A.; Breskin, A.; Chechik, R.

1996-04-01T23:59:59.000Z

112

Standardization of 241Am by digital coincidence counting, liquid scintillation counting and defined solid angle counting  

E-Print Network [OSTI]

The nuclide 241Am decays by alpha emission to 237Np. Most of the decays (84.6 %) populate the excited level of 237Np with energy of 59.54 keV. Digital Coincidence Counting was applied to standardize a solution of 241Am by alpha-gamma coincidence counting with efficiency extrapolation. Electronic discrimination was implemented with a pressurized proportional counter and the results were compared with two other independent techniques: Liquid Scintillation Counting using the logical sum of double coincidences in a TDCR array and Defined Solid Angle Counting taking into account activity inhomogeneity in the active deposit. The results show consistency between the three methods within a limit of a 0.3%. An ampoule of this solution will be sent to the International Reference System (SIR) during 2009. Uncertainties were analysed and compared in detail for the three applied methods.

C. Balpardo; M. E. Capoulat; D. Rodrigues; P. Arenillas

2010-05-10T23:59:59.000Z

113

Hanford whole body counting manual  

SciTech Connect (OSTI)

This document describes the Hanford Whole Body Counting Program as it is administered by Pacific Northwest Laboratory (PNL) in support of the US Department of Energy--Richland Operations Office (DOE-RL) and its Hanford contractors. Program services include providing in vivo measurements of internally deposited radioactivity in Hanford employees (or visitors). Specific chapters of this manual deal with the following subjects: program operational charter, authority, administration, and practices, including interpreting applicable DOE Orders, regulations, and guidance into criteria for in vivo measurement frequency, etc., for the plant-wide whole body counting services; state-of-the-art facilities and equipment used to provide the best in vivo measurement results possible for the approximately 11,000 measurements made annually; procedures for performing the various in vivo measurements at the Whole Body Counter (WBC) and related facilities including whole body counts; operation and maintenance of counting equipment, quality assurance provisions of the program, WBC data processing functions, statistical aspects of in vivo measurements, and whole body counting records and associated guidance documents. 16 refs., 48 figs., 22 tabs.

Palmer, H.E.; Rieksts, G.A.; Lynch, T.P.

1990-06-01T23:59:59.000Z

114

Counting Bitangents with Stable Maps  

E-Print Network [OSTI]

This paper is an elementary introduction to the theory of moduli spaces of curves and maps. As an application to enumerative geometry, we show how to count the number of bitangent lines to a projective plane curve of degree $d$ by doing intersection theory on moduli spaces.

David Ayala; Renzo Cavalieri

2005-12-22T23:59:59.000Z

115

Natural Gas Discovery and Development Impacts on Rio Vista and Its Community  

E-Print Network [OSTI]

Modern Rotary Drilling Rig………………………………………………………………………………….Equipment Used on Modern Rotary Drilling Rig 142 Figure A2.Used on Modern Rotary Drilling Rig Source: California

Gbedema, Tometi Koku

2006-01-01T23:59:59.000Z

116

Department of Mechanical Engineering Spring 2010 Kenya Water Well Drill Rig Redesign of Engine Drive Train System & Support Tower  

E-Print Network [OSTI]

of Engine Drive Train System & Support Tower Overview The team was presented with the task of redesigning the engine drive train system and support structure for a water drill rig to be used in Kenya. The original engine drive train system was fabricated by a professional machinist and had many intricate components

Demirel, Melik C.

117

Finger-Count & Radial-Stroke Shortcuts  

E-Print Network [OSTI]

Finger-Count & Radial-Stroke Shortcuts: Two Techniques for Augmenting Linear Menus on Multi-finger Interaction techniques ·Principles ·Finger-Counting ·Radial-Stroke 5 #12;Finger-Counting ·Express a pair;Radial-Stroke Shortcuts ·Principle ·Radial-stroke · Marking menus [Kurtenbach 91] · Multi-Stroke menus

Bailly, Gilles

118

Counting Rises, Levels and Drops in Compositions 1 Counting Rises, Levels and  

E-Print Network [OSTI]

Counting Rises, Levels and Drops in Compositions 1 Counting Rises, Levels and Drops in Compositions Mansour Department of Mathematics, Haifa University, Israel #12;Counting Rises, Levels and Drops;Counting Rises, Levels and Drops in Compositions 3 Definitions · A composition = 12 . . . m of n N

Heubach, Silvia

119

Low Background Counting At SNOLAB  

SciTech Connect (OSTI)

It is a continuous and ongoing effort to maintain radioactivity in materials and in the environment surrounding most underground experiments at very low levels. These low levels are required so that experiments can achieve the required detection sensitivities for the detection of low-energy neutrinos, searches for dark matter and neutrinoless double-beta decay. SNOLAB has several facilities which are used to determine these low background levels in the materials and the underground environment. This proceedings will describe the SNOLAB High Purity Germanium Detector which has been in continuous use for the past five years and give results of many of the items that have been counted over that period. Brief descriptions of SNOLAB's alpha-beta and electrostatic counters will be given, and the radon levels at SNOLAB will be discussed.

Lawson, Ian; Cleveland, Bruce [SNOLAB, 1039 Regional Rd 24, Lively, ON P3Y 1N2 (Canada)

2011-04-27T23:59:59.000Z

120

The Minnesota Bicycle and Pedestrian Counting Initiative  

E-Print Network [OSTI]

The Minnesota Bicycle and Pedestrian Counting Initiative: Methodologies for Non-motorized Traffic Monitoring 22 May 2013 #12;Today's Presentation · MN Bicycle and Pedestrian Counting Initiative ­ Research objectives and guiding principles ­ Trends in non-motorized traffic monitoring ­ Bicycle and pedestrian

Minnesota, University of

Note: This page contains sample records for the topic "gas rig counts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Exploration of Novel Fuels for Gas Turbine (ENV-406) Modeling of T60 Test Rig with Diesel & Biodiesel Fuels  

E-Print Network [OSTI]

& Biodiesel Fuels Mémoire Mina Youssef Maîtrise en génie mécanique Maître ès sciences (M.Sc.) Québec, Canada de biodiesel B20. La matrice de test numérique constitue de quatre cas d'écoulement réactifs c to simulate the liquid combustion of conventional and non- conventional biodiesel fuels, in particularly the B

122

1166 IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, VOL. 48, NO. 6, DECEMBER 1999 A Multichannel Photon Counting System for  

E-Print Network [OSTI]

of which are in the fields of medical electronics (confocal microscopy) and bio-electronics, air pollution. Index Terms-- Air pollution, laser gas sensor, multichannel gas monitoring, optoelectronic measurement a multichannel photon- counting system for the in situ quantitative monitoring of up to five air pollutants

Athens, University of

123

Low cost crowd counting using audio tones  

E-Print Network [OSTI]

With mobile devices becoming ubiquitous, collaborative applications have become increasingly pervasive. In these applications, there is a strong need to obtain a count of the number of mobile devices present in an area, ...

Kannan, Pravein Govindan

124

Complexity of Counting CSP with Complex Weights  

E-Print Network [OSTI]

We give a complexity dichotomy theorem for the counting Constraint Satisfaction Problem (#CSP in short) with complex weights. To this end, we give three conditions for its tractability. Let F be any finite set of complex-valued functions, then we prove that #CSP(F) is solvable in polynomial time if all three conditions are satisfied; and is #P-hard otherwise. Our complexity dichotomy generalizes a long series of important results on counting problems: (a) the problem of counting graph homomorphisms is the special case when there is a single symmetric binary function in F; (b) the problem of counting directed graph homomorphisms is the special case when there is a single not-necessarily-symmetric binary function in F; and (c) the standard form of #CSP is when all functions in F take values in {0,1}.

Cai, Jin-Yi

2011-01-01T23:59:59.000Z

125

Galaxy counts at 450 and 850 microns  

E-Print Network [OSTI]

Surveys of the distant Universe have been made using the SCUBA submillimeter(submm)-wave camera at the JCMT. 450- and 850-micron data is taken simultaneously by SCUBA in the same 5-square-arcmin field. Deep 850-micron counts of high-redshift dusty galaxies have been published; however, at 450 microns both the atmospheric transmission and antenna efficiency are lower, and the atmospheric noise is higher, and so only upper limits to the 450-micron counts have been reported so far. Here we apply the methods used by Blain et al. (1999) to derive deep 850-micron counts from SCUBA images of lensing clusters to the 450-micron images that were obtained in parallel, in which four sources were detected. We present the first 450-micron galaxy count. This analysis has only just become possible because the volume of data and the difficulty of calibration are both greater for the 450-micron array. In light of recent work, in which the identification of two of the galaxies in our sample was clarified, we also update our deep 850-micron counts.

Andrew W. Blain; Rob Ivison; Jean-Paul Kneib; Ian Smail

1999-08-03T23:59:59.000Z

126

Small (5 million Btu/h) and large (300 million Btu/h) thermal test rigs for coal and coal slurry burner development  

SciTech Connect (OSTI)

NEI International Combustion Ltd. of Derby, England, now operates two thermal test rigs for the development of burners capable of handling coal-water slurries (CWS). A general description of the large rig and its capacity was given. Also, the necessary conversions of the equipment to handle CWS were described. Information on the properties of the CWS was included. This consisted of chemical analysis of the parent coal and the slurry, sieve analysis of a dry sample, and viscosity versus temperature data of the CWS. The process of design development of the burner was outlined. Ten illustrations were presented, including schematic diagrams of equipment and graphs of data.

Allen, J.W.; Beal, P.R.; Hufton, P.F.

1983-01-01T23:59:59.000Z

127

Differential white cell count by centrifugal microfluidics.  

SciTech Connect (OSTI)

We present a method for counting white blood cells that is uniquely compatible with centrifugation based microfluidics. Blood is deposited on top of one or more layers of density media within a microfluidic disk. Spinning the disk causes the cell populations within whole blood to settle through the media, reaching an equilibrium based on the density of each cell type. Separation and fluorescence measurement of cell types stained with a DNA dye is demonstrated using this technique. The integrated signal from bands of fluorescent microspheres is shown to be proportional to their initial concentration in suspension. Among the current generation of medical diagnostics are devices based on the principle of centrifuging a CD sized disk functionalized with microfluidics. These portable 'lab on a disk' devices are capable of conducting multiple assays directly from a blood sample, embodied by platforms developed by Gyros, Samsung, and Abaxis. [1,2] However, no centrifugal platform to date includes a differential white blood cell count, which is an important metric complimentary to diagnostic assays. Measuring the differential white blood cell count (the relative fraction of granulocytes, lymphocytes, and monocytes) is a standard medical diagnostic technique useful for identifying sepsis, leukemia, AIDS, radiation exposure, and a host of other conditions that affect the immune system. Several methods exist for measuring the relative white blood cell count including flow cytometry, electrical impedance, and visual identification from a stained drop of blood under a microscope. However, none of these methods is easily incorporated into a centrifugal microfluidic diagnostic platform.

Sommer, Gregory Jon; Tentori, Augusto M.; Schaff, Ulrich Y.

2010-07-01T23:59:59.000Z

128

A concept for marine shallow drilling Drill test from R/V Hkom Mosby in Nov. 1995 Commercial rig built by GeoDrilling  

E-Print Network [OSTI]

A concept for marine shallow drilling Drill test from R/V HÃ¥kom Mosby in Nov. 1995 Commercial rig built by GeoDrilling BACKGROUND There is a quantum leap between the costs of marine operations using conventional sediment coring devices with or without piston for 10-15 m of core recovery and drilling from

Kristoffersen, Yngve

129

COUNTING WITH IRRATIONAL TILES SCOTT GARRABRANT  

E-Print Network [OSTI]

and rational side lengths. Note that the dark shaded tiles here are bookends, i.e. every tiling of [1 Ã? n] must f(n) is in F1, i.e. equal to fT (n) for all n 1 and some rational set of tiles T as aboveCOUNTING WITH IRRATIONAL TILES SCOTT GARRABRANT AND IGOR PAK Abstract. We introduce and study

Pak, Igor

130

Wholebody radiation counting system. Final report  

SciTech Connect (OSTI)

The purpose of this research was to develop a system that would allow the Health Physics staff of the Nuclear Engineering Department of Rensselaer Polytechnic Institute to conduct wholebody radiation counting of all assigned personnel and to determine if a multiple-crystal arrangement had any benefits over the single-crystal system. The research had three main objectives: to design and construct the electronic hardware necessary to collect data from a series of three NaI(Tl) scintilation crystals; to develop the computer software necessary to interpret this data and calculate concentrations present within those individuals tested; and to interface the Helgeson Wholebody Counter with the Vax 11/750 Computer System. This system includes a Texas Instruments TM990-101M Microcomputer which acts as the main control unit for the operator and as the interface with the Vax computer. Additionally, the final system included a computer interface and data acquisition module and it uses a Digital Equipment Corporation VAX 11/750 Computer System for a majority of the data manipulation. This system, as all wholebody counting systems, is characterized by its ability to detect low levels of radionuclide concentration while maintaining adequate resolution to identify the exact isotopes present within the person being counted.

Fechter, G.M.

1985-05-01T23:59:59.000Z

131

Full Counting Statistics of Stationary Particle Beams  

E-Print Network [OSTI]

We present a general scheme for treating particle beams as many particle systems. This includes the full counting statistics and the requirements of Bose/Fermi symmetry. In the stationary limit, i.e., for longer and longer beams, the total particle number diverges, and a description in Fock space is no longer possible. We therefore extend the formalism to include stationary beams. These beams exhibit a well-defined "local" counting statistics, by which we mean the full counting statistics of all clicks falling into any given finite interval. We treat in detail a model of a source, creating particles in a fixed state, which then evolve under the free time evolution, and we determine the resulting stationary beam in the far field. In comparison to the one-particle picture we obtain a correction due to Bose/Fermi statistics, which depends on the emission rate. We also consider plane waves as stationary many particle states, and determine the distribution of intervals between successive clicks in such a beam.

J. Kiukas; A. Ruschhaupt; R. F. Werner

2011-03-07T23:59:59.000Z

132

Galactic structure studies with BATC star counts  

E-Print Network [OSTI]

We report the first results of star counts carried out with the National Astronomical Observatories (NAOC) 60/90 cm Schmidt Telescope in 15 intermediate-band filters from 3000 to 10000 {\\AA} in the BATC survey. We analyze a sample of over 1400 main sequence stars ($14\\le$V$\\le21$), which lie in the field with central coordinates R.A.=$09^h53^m13^s.30$ and DEC=47$^\\circ49^{\\prime}00^{\\prime\\prime}.0$ (J2000). The field of view is 0.95 deg$^{2}$, and the spatial scale was $1\\arcsec.67$. In our model, the distribution of stars perpendicular to the plane of the Galaxy is given by two exponential disks (thin disk plus thick disk) and a de Vaucouleurs halo. Based on star counts, we derive the scale heights of the thin disk to be $320^{+14}_{-15}$ pc and of the thick disk to be $640^{+30}_{-32}$ pc, respectively, with a local density of $7.0\\pm1%$ of the thin disk. We find that the observed counts support an axial ratio of $c/a\\le0.6$ for a de Vaucouleurs $r^{1/4}$ law, implying a more flattened halo. We also derive...

Du, C; Ma, J; Chen, A B C; Yang, Y; Li, J; Wu, H; Jiang, Z; Chen, J; Du, Cuihua; Zhou, Xu; Ma, Jun; Chen, Alfred B-C; Yang, Yanbin; Li, Jiuli; Wu, Hong; Jiang, Zhaoji; Chen, Jiansheng

2003-01-01T23:59:59.000Z

133

Estimation and specification tests of count data recreation demand functions  

E-Print Network [OSTI]

addressed this issue by employing various estimators which are based on a count distribution. Although researchers have recognized the need to model recreation demand as stemming from a count data generating process, there is little guidance in selecting... a stochastic model for this type of data, Previous research in this area has so far engaged only in heuristic comparisons of various count data estimators. Hence, as in standard regression analysis, it is desirable to test whether the fitted count...

Gomez, Irma Adriana

1991-01-01T23:59:59.000Z

134

Using Prefetching to Improve Reference-Counting Garbage Collectors  

E-Print Network [OSTI]

Using Prefetching to Improve Reference-Counting Garbage Collectors Harel Paz 1 and Erez Petrank 2 1-counting collector. We propose potential prefetching opportunities for the advanced reference-counting collector and report an implementation of a collector that employs such prefetch- ing. The proposed prefetch

Petrank, Erez

135

Integrating Generations with Advanced Reference Counting Garbage Collectors  

E-Print Network [OSTI]

Integrating Generations with Advanced Reference Counting Garbage Collectors Hezi Azatchi 1 and Erez@cs.technion.ac.il Abstract. We study an incorporation of generations into a modern reference counting collector. We start with the two on-the- y collectors suggested by Levanoni and Petrank: a reference counting collector

Krintz, Chandra

136

Deep gas plays are persuading companies like Getty and Mesa petroleum to invest in lease acquisitions  

SciTech Connect (OSTI)

Much of the big money being spent in the Permian Basin may be going to elaborate tertiary projects for improved oil recovery, but the deep natural gas reserves in the Delaware Basin continue to draw the big drilling and leasing dollars. According to the petroleum information's Rotary Report of late April 1981, Texas Railroad Commission district No. 8 in west Texas had 148 rigs running. Of those, 60 were in a 4-county area of Loving, Pecos, Ward, and Reeves Counties. Thirty-four of those rigs in that area were drilling to objectives below 15,000 ft. In the March University Lands Lease Auction, high dollars were directed to portions of west Texas that include the Delaware Basin.

Mickey, V.

1981-06-01T23:59:59.000Z

137

Active neutron multiplicity counting of bulk uranium  

SciTech Connect (OSTI)

This paper describes a new nondestructive assay technique being developed to assay bulk uranium containing kilogram quantities of {sup 235}U. The new technique uses neutron multiplicity analysis of data collected with a coincidence counter outfitted with AmLi neutron sources. We have calculated the expected neutron multiplicity count rate and assay precision for this technique and will report on its expected performance as a function of detector design characteristics, {sup 235 }U sample mass, AmLi source strength, and source-to-sample coupling. 11 refs., 2 figs., 2 tabs.

Ensslin, N.; Krick, M.S.; Langner, D.G.; Miller, M.C.

1991-01-01T23:59:59.000Z

138

Impact of Fuel Interchangeability on dynamic Instabilities in Gas Turbine Engines  

SciTech Connect (OSTI)

Modern, low NOx emitting gas turbines typically utilize lean pre-mixed (LPM) combustion as a means of achieving target emissions goals. As stable combustion in LPM systems is somewhat intolerant to changes in operating conditions, precise engine tuning on a prescribed range of fuel properties is commonly performed to avoid dynamic instabilities. This has raised concerns regarding the use of imported liquefied natural gas (LNG) and natural gas liquids (NGL’s) to offset a reduction in the domestic natural gas supply, which when introduced into the pipeline could alter the fuel BTU content and subsequently exacerbate problems such as combustion instabilities. The intent of this study is to investigate the sensitivity of dynamically unstable test rigs to changes in fuel composition and heat content. Fuel Wobbe number was controlled by blending methane and natural gas with various amounts of ethane, propane and nitrogen. Changes in combustion instabilities were observed, in both atmospheric and pressurized test rigs, for fuels containing high concentrations of propane (> 62% by vol). However, pressure oscillations measured while operating on typical “LNG like” fuels did not appear to deviate significantly from natural gas and methane flame responses. Mechanisms thought to produce changes in the dynamic response are discussed.

Ferguson, D.H.; Straub, D.L.; Richards, G.A.; Robey, E.H.

2007-03-01T23:59:59.000Z

139

155The Great Gulf Oil Catastrophe of 2010 NASA's Terra satellite flew over the Deepwater Horizon rig's oil spill in the Gulf  

E-Print Network [OSTI]

rig's oil spill in the Gulf of Mexico on Saturday, May 1 and captured the above natural-color image of Mexico. NOAA's estimated release rate of oil spilling into the Gulf is 200,000 gallons per day since/meter 2 ? B) kg/meter 2 ? Problem 4 ­ The density of crude oil is about D=850 kg/m 3 . From your estimate

140

DEVELOPMENT AND DEMONSTRATION OF AN ULTRA LOW NOx COMBUSTOR FOR GAS TURBINES  

SciTech Connect (OSTI)

Alzeta Corporation has developed surface-stabilized fuel injectors for use with lean premixed combustors which provide extended turndown and ultra-low NOX emission performance. These injectors use a patented technique to form interacting radiant and blue-flame zones immediately above a selectively-perforated porous metal surface. This allows stable operation at low reaction temperatures. This technology is being commercialized under the product name nanoSTAR. Initial tests demonstrated low NOX emissions but, were limited by flashback failure of the injectors. The weld seams required to form cylindrical injectors from flat sheet material were identified as the cause of the failures. The approach for this project was to first develop new fabrication methods to produce injectors without weld seams, verify similar emissions performance to the original flat sheet material and then develop products for microturbines and small gas turbines along parallel development paths. A 37 month project was completed to develop and test a surface stabilized combustion system for gas turbine applications. New fabrication techniques developed removed a technological barrier to the success of the product by elimination of conductive weld seams from the injector surface. The injectors demonstrated ultra low emissions in rig tests conducted under gas turbine operating conditions. The ability for injectors to share a common combustion chamber allowing for deployment in annular combustion liner was also demonstrated. Some further development is required to resolve integration issues related to specific engine constraints, but the nanoSTAR technology has clearly demonstrated its low emissions potential. The overall project conclusions can be summarized: (1) A wet-laid casting method successfully eliminated weld seams from the injector surface without degrading performance. (2) Gas turbine cycle analysis identified several injector designs and control schemes to start and load engines using nanoSTAR technology. A mechanically simple single zone injector can be used in Solar Turbine's Taurus 60 engine. (3) Rig testing of single monolithic injectors demonstrated sub 3 ppmv NOX and sub 10 ppmv CO and UHC emissions (all corrected to 15% O2) at Taurus 60 full-load pressure and combustion air inlet temperature. (4) Testing of two nanoSTAR injectors in Solar Turbine's sector rig demonstrated the ability for injectors to survive when fired in close proximity at Taurus 60 full load pressure and combustion air inlet temperature. (5) Sector rig tests demonstrated emissions performance and range of operability consistent with single injector rig tests. Alzeta has committed to the commercialization of nanoSTAR injectors and has sufficient production capability to conclude development and meet initial demand.

NEIL K. MCDOUGALD

2005-04-30T23:59:59.000Z

Note: This page contains sample records for the topic "gas rig counts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Effects of Propane/Natural Gas Blended Fuels on Gas Turbine Pollutant Emissions  

SciTech Connect (OSTI)

Liquefied natural gas (LNG) imports to the U.S. are expected to grow significantly over the next 10-15 years. Likewise, it is expected that changes to the domestic gas supply may also introduce changes in natural gas composition. As a result of these anticipated changes, the composition of fuel sources may vary significantly from conventional domestic natural gas supplies. This paper will examine the effects of fuel variability on pollutant emissions for premixed gas turbine conditions. The experimental data presented in this paper have been collected from a pressurized single injector combustion test rig at the National Energy Technology Laboratory (NETL). The tests are conducted at 7.5 atm with a 588 K air preheat. A propane blending facility is used to vary the Wobbe Index of the site natural gas. The results indicate that propane addition of about five (vol.) percent does not lead to a significant change in the observed NOx or CO emissions. These results are different from data collected on some engine applications and potential reasons for these differences will be described.

Straub, D.L.; Ferguson, D.H.; Casleton, K.H.; Richards, G.A.

2007-03-01T23:59:59.000Z

142

Diatomaceous earth and activated bauxite used as granular sorbents for the removal of sodium chloride vapor from hot flue gas  

SciTech Connect (OSTI)

Diatomaceous earth and activated bauxite were tested as granular sorbents for use as filter media in granular-bed filters for the removal of gaseous alkali metal compounds from the hot (800/sup 0/C) flue gas of PFBC. Tests were performed at atmospheric pressure, using NaCl vapor transported in relatively dry simulated flue gas of PFBC. Either a fixed-bed combustor or a high-temperature sorption test rig was used. The effects of sorbent bed temperature, superficial gas velocity, gas hourly space velocity, and NaCl-vapor concentration in flue gas on the sorption behavior of these two sorbents and their ultimate sorption capacities were determined. Both diatomaceous earth and activated bauxite were found to be very effective in removing NaCl vapor from flue gas. Preliminary cost evaluations showed that they are economically attractive as granular sorbents for cleaning alkali vapor from simulated flue gas.

Lee, S.H.D.; Swift, W.M.; Johnson, I.

1980-01-01T23:59:59.000Z

143

Low background counting techniques at SNOLAB  

SciTech Connect (OSTI)

Many of the experiments currently searching for dark matter, studying properties of neutrinos or searching for neutrinoless double beta decay require very low levels of radioactive backgrounds both in their own construction materials and in the surrounding environment. These low background levels are required so that the experiments can achieve the required sensitivities for their searches. SNOLAB has several facilities which are used to directly measure these radioactive backgrounds. This proceedings will describe SNOLAB's High Purity Germanium Detectors, one of which has been in continuous use for the past seven years measuring materials for many experiments in operation or under construction at SNOLAB. A description of the characterisation of SNOLAB's new germanium well detector will be presented. In addition, brief descriptions of SNOLAB's alpha-beta and electrostatic counters will be presented and a description of SNOLAB's future low background counting laboratory will be given.

Lawson, Ian; Cleveland, Bruce [SNOLAB, 1039 Regional Rd 24, Lively, ON P3Y 1N2 (Canada)] [SNOLAB, 1039 Regional Rd 24, Lively, ON P3Y 1N2 (Canada)

2013-08-08T23:59:59.000Z

144

Ion counting efficiencies at the IGISOL facility  

E-Print Network [OSTI]

At the IGISOL-JYFLTRAP facility, fission mass yields can be studied at high precision. Fission fragments from a U target are passing through a Ni foil and entering a gas filled chamber. The collected fragments are guided through a mass separator to a Penning trap where their masses are identified. This simulation work focuses on how different fission fragment properties (mass, charge and energy) affect the stopping efficiency in the gas cell. In addition, different experimental parameters are varied (e. g. U and Ni thickness and He gas pressure) to study their impact on the stopping efficiency. The simulations were performed using the Geant4 package and the SRIM code. The main results suggest a small variation in the stopping efficiency as a function of mass, charge and kinetic energy. It is predicted that heavy fragments are stopped about 9% less efficiently than the light fragments. However it was found that the properties of the U, Ni and the He gas influences this behavior. Hence it could be possible to optimize the efficiency.

A. Al-Adili; K. Jansson; M. Lantz; A. Solders; C. Gustavsson; A. Mattera; A. V. Prokofiev; V. Rakopoulos; D. Tarrío; S. Wiberg; M. Österlund; S. Pomp

2014-09-02T23:59:59.000Z

145

Absolute nuclear material assay using count distribution (LAMBDA) space  

DOE Patents [OSTI]

A method of absolute nuclear material assay of an unknown source comprising counting neutrons from the unknown source and providing an absolute nuclear material assay utilizing a model to optimally compare to the measured count distributions. In one embodiment, the step of providing an absolute nuclear material assay comprises utilizing a random sampling of analytically computed fission chain distributions to generate a continuous time-evolving sequence of event-counts by spreading the fission chain distribution in time.

Prasad, Manoj K. (Pleasanton, CA); Snyderman, Neal J. (Berkeley, CA); Rowland, Mark S. (Alamo, CA)

2012-06-05T23:59:59.000Z

146

Acoustic Method for Fish Counting and Fish Sizing in Tanks  

E-Print Network [OSTI]

Counting and Fish Sizing in Tanks W.A. Kuperman and Philippedistributed among its 97 tanks to maximize feed-conversionrequires inventory- ing tanks regularly. Currently, this is

Kuperman, William A.; Roux, Philippe

2004-01-01T23:59:59.000Z

147

Acoustic Method for Fish Counting and Fish Sizing in Tanks  

E-Print Network [OSTI]

measurements in an echoic tank. ICES Journal of Marineto fish counting in a tank. Journal of the Acousticaland materials of the cylindrical tanks for the experiments.

Roux, Philippe; Conti, Stéphane; Demer, David; Maurer, Benjamin D.

2005-01-01T23:59:59.000Z

148

Model methodology and data description of the Production of Onshore Lower 48 Oil and Gas model  

SciTech Connect (OSTI)

This report documents the methodology and data used in the Production of Onshore Lower 48 Oil and Gas (PROLOG) model. The model forecasts annual oil and natural gas production on a regional basis. Natural gas is modeled by gas category, generally conforming to categories defined by the Natural Gas Policy Act (NGPA) of 1978, as well as a category representing gas priced by way of a spot market (referred to as ''spot'' gas). A linear program is used to select developmental drilling activities for conventional oil and gas and exploratory drilling activities for deep gas on the basis of their economic merit, subject to constraints on available rotary rigs and constraints based on historical drilling patterns. Using exogenously specified price paths for oil and gas, net present values are computed for fixed amounts of drilling activity for oil and gas development and deep gas exploration in each of six onshore regions. Through maximizing total net present value, the linear program provides forecasts of drilling activities, reserve additions, and production. Oil and shallow gas exploratory drilling activities are forecast on the basis of econometrically derived equations, which are dependent on specified price paths for the two fuels. 10 refs., 3 figs., 10 tabs.

Not Available

1988-09-01T23:59:59.000Z

149

Shallow gas well drilling with coiled tubing in the San Juan Basin  

SciTech Connect (OSTI)

Coiled tubing is being utilized to drill new wells, for re-entry drilling to deepen or laterally extend existing wells, and for underbalanced drilling to prevent formation damage. Less than a decade old, coiled tubing drilling technology is still in its inaugral development stage. Initially, utilizing coiled tubing was viewed as a {open_quotes}science project{close_quotes} to determine the validity of performing drilling operations in-lieu of the conventional rotary rig. Like any new technology, the initial attempts were not always successful, but did show promise as an economical alternative if continued efforts were made in the refinement of equipment and operational procedures. A multiwell project has been completed in the San Juan Basin of Northwestern New Mexico which provides documentation indicating that coiled tubing can be an alternative to the conventional rotary rig. A 3-well pilot project, a 6-well project was completed uniquely utilizing the combined resources of a coiled tubing service company, a producing company, and a drilling contractor. This combination of resources aided in the refinement of surface equipment, personnel, mud systems, jointed pipe handling, and mobilization. The results of the project indicate that utilization of coiled tubing for the specific wells drilled was an economical alternative to the conventional rotary rig for drilling shallow gas wells.

Moon, R.G.; Ovitz, R.W.; Guild, G.J.; Biggs, M.D.

1996-12-31T23:59:59.000Z

150

Near-Zero NOx Combustion Technology for ATS Mercury 50 Gas Turbine  

SciTech Connect (OSTI)

A project to demonstrate a near-zero NOx, catalytic combustion technology for natural gas-fired, industrial gas turbines is described. In a cooperative effort between Solar Turbines Incorporated and Precision Combustion Incorporated (PCI), proof-of-concept rig testing of PCI's fuel-rich catalytic combustion technology has been completed successfully. The primary technical goal of the project was to demonstrate NOx and CO emissions below 5ppm and 10 ppm, respectively, (corrected to 15% O{sub 2}) at realistic gas turbine operating conditions. The program consisted of two tasks. In the first task, a single prototype RCL{trademark} (Rich Catalytic Lean Burn) module was demonstrated at Taurus 70 (7.5 Mw) operating conditions (1.6 MPa, 16 atm) in a test rig. For a Taurus 70 engine, eight to twelve RCL modules will be required, depending on the final system design. In the second task, four modules of a similar design were adapted to a Saturn engine (1 Mw) test rig (600 kPa, 6 atm) to demonstrate gas turbine light-off and operation with an RCL combustion system. This project was initially focused on combustion technology for the Mercury 50 engine. However, early in the program, the Taurus 70 replaced the Mercury. This substitution was motivated by the larger commercial market for an ultra-low NOx Taurus 70 in the near-term. Rig tests using a single prototype RCL module at Taurus 70 conditions achieved NOx emissions as low as 0.75 ppm. A combustor turndown of approximately 110C (200F) was achieved with NOx and CO emissions below 3 ppm and 10 ppm, respectively. Catalyst light-off occurred at an inlet temperature of 310C (590F). Once lit the module remained active at inlet air temperatures as low as 204C (400F). Combustor pressure oscillations were acceptably low during module testing. Single module rig tests were also conducted with the Taurus 70 module reconfigured with a central pilot fuel injector. Such a pilot will be required in a commercial RCL system for turbine light-off and transient operation. At and near simulated full load engine conditions, the pilot operated at low pilot fueling rates without degrading overall system emissions. In the second project task, a set of four Taurus 70 modules was tested in an existing Saturn engine rig. The combustion system allowed smooth engine startup and load variation. At steady state conditions (between 82% and 89.7% engine speed; 32% and 61% load), NOx and CO emissions were below 3ppm and 10ppm, respectively. Rig limitations unrelated to the RCL technology prevented low emissions operation outside of this speed range. Combustor pressure oscillations were low, below 0.25 % (peak-to-peak) of the mean combustor pressure.

Kenneth Smith

2004-12-31T23:59:59.000Z

151

The rigging material from Boscawen: setting the sails of a mid-eighteenth-century warship during the French and Indian War  

E-Print Network [OSTI]

304 305 307 306 310 311 312 313 314 402 403 404 407 ~ 10 411 412 413 414 J : 415 7 501 5Q2 503 504 505 506 507 5 ' 6 510 511 12 613 514 616 . . . ~S' 602 603 604 606 607 609 610 611 -"'a 613 614 615 ~ sTEM ? ll AMDEM PE~| ETEEM~ Figure 3-l... 83 . . . 139 vn LIST OF FIGURES FIGURE 3-1 3-2 The Boscawen excavation grid plan The Boscawen excavation site plan . Page 22 24 4-1 A concentration of rigging material recovered from the stern . . . . . . . . . . . . 27 4-2 4-3 4-4 4...

Flanigan, Alan Thomas

1999-01-01T23:59:59.000Z

152

Hoisting and Rigging  

Broader source: Energy.gov (indexed) [DOE]

cracks, or other defects after the load test is completed. 14.2.7 MAINTENANCE a. A preventive maintenance program shall be established based upon manufacturer's...

153

Hoisting and Rigging  

Broader source: Energy.gov (indexed) [DOE]

MAINTENANCE Chapter 16 16-8 Miscellaneous Lifting Devices 16.4.1 MAINTENANCE PROGRAM A preventive maintenance program based on the manufacturer's recommendations shall be...

154

Hoisting and Rigging  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.ProgramJulietip sheetK-4In 2013 many|Humans have been harnessingof

155

Hoisting and Rigging  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.ProgramJulietip sheetK-4In 2013 many|Humans have been harnessingof1-i CHAPTER

156

Hoisting and Rigging  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.ProgramJulietip sheetK-4In 2013 many|Humans have been harnessingof1-i CHAPTER

157

Hoisting and Rigging  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.ProgramJulietip sheetK-4In 2013 many|Humans have been harnessingof1-i CHAPTER

158

Hoisting and Rigging  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.ProgramJulietip sheetK-4In 2013 many|Humans have been harnessingof1-i CHAPTER4

159

Hoisting and Rigging  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.ProgramJulietip sheetK-4In 2013 many|Humans have been harnessingof1-i

160

Hoisting and Rigging  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.ProgramJulietip sheetK-4In 2013 many|Humans have been harnessingof1-i4 LIFTING

Note: This page contains sample records for the topic "gas rig counts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Hoisting and Rigging  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.ProgramJulietip sheetK-4In 2013 many|Humans have been harnessingof1-i4

162

Hoisting and Rigging  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.ProgramJulietip sheetK-4In 2013 many|Humans have been harnessingof1-i48 HOISTS

163

Hoisting and Rigging  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.ProgramJulietip sheetK-4In 2013 many|Humans have been harnessingof1-i48 HOISTS

164

Hoisting and Rigging  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.ProgramJulietip sheetK-4In 2013 many|Humans have been harnessingof1-i48

165

Hoisting and Rigging  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.ProgramJulietip sheetK-4In 2013 many|Humans have been harnessingof1-i487

166

rig upgrades2.qxp  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched5 Industrial Carbon CaptureFY08 Joint JOULECorrectiveResearchrfry

167

Chapter 10 - RIGGING HARDWARE  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed New Substation SitesStanding FriedelIron-Sulfur ProteinChallengeforMorgan-10-10.0 -

168

Rig Efficiency Paper  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines AboutDecemberSteamYear Jan FebThousand Cubic Feet)Year Jan Feb MarAuthor: John

169

Correlated neutron counting for the 21st century  

SciTech Connect (OSTI)

Correlated neutron counting techniques, such as neutron coincidence and multiplicity counting, are widely employed at nuclear fuel cycle facilities for the accountancy of nuclear material such as plutonium. These techniques need to be improved and enhanced to meet the challenges of complex measurement items and future nuclear safeguards applications, for example; the non-destructive assay of spent nuclear fuel, high counting rate applications, small sample measurements, and Helium-3 replacement. At the same time simulation tools, used for the design of detection systems based on these techniques, are being developed in anticipation of future needs. This seminar will present the theory and current state of the practice of temporally correlated neutron counting. A range of future safeguards applications will then be presented in the context of research projects at Los Alamos National Laboratory.

Evans, Louise G [Los Alamos National Laboratory

2010-12-01T23:59:59.000Z

170

Energy conservation, counting statistics, and return to equilibrium  

E-Print Network [OSTI]

Energy conservation, counting statistics, and return to equilibrium V. Jaksi´c1 , J. Panangaden1 lim t QS(, t), QR = lim 0 lim t QR(, t). As a consequence of energy conservation, we expect that QS

Jaksic, Vojkan

171

Melt Infiltrated Ceramic Matrix Composites for Shrouds and Combustor Liners of Advanced Industrial Gas Turbines  

SciTech Connect (OSTI)

This report covers work performed under the Advanced Materials for Advanced Industrial Gas Turbines (AMAIGT) program by GE Global Research and its collaborators from 2000 through 2010. A first stage shroud for a 7FA-class gas turbine engine utilizing HiPerComp{reg_sign}* ceramic matrix composite (CMC) material was developed. The design, fabrication, rig testing and engine testing of this shroud system are described. Through two field engine tests, the latter of which is still in progress at a Jacksonville Electric Authority generating station, the robustness of the CMC material and the shroud system in general were demonstrated, with shrouds having accumulated nearly 7,000 hours of field engine testing at the conclusion of the program. During the latter test the engine performance benefits from utilizing CMC shrouds were verified. Similar development of a CMC combustor liner design for a 7FA-class engine is also described. The feasibility of using the HiPerComp{reg_sign} CMC material for combustor liner applications was demonstrated in a Solar Turbines Ceramic Stationary Gas Turbine (CSGT) engine test where the liner performed without incident for 12,822 hours. The deposition processes for applying environmental barrier coatings to the CMC components were also developed, and the performance of the coatings in the rig and engine tests is described.

Gregory Corman; Krishan Luthra; Jill Jonkowski; Joseph Mavec; Paul Bakke; Debbie Haught; Merrill Smith

2011-01-07T23:59:59.000Z

172

Interdependence of the Electricity Generation System and the Natural Gas System and Implications for Energy Security  

E-Print Network [OSTI]

Approved for public release; distribution is unlimited. Lexington Massachusetts This page intentionally left blank. EXECUTIVE SUMMARY Concern about energy security on domestic Department of Defense installations has led to the possibility of using natural gas-fired electricity generators to provide power in the event of electric grid failures. As natural gas is an increasingly base-load fuel for electricity generation in the United States, the electricity generation system has become increasingly dependent on the operation of the natural gas system. However, as the natural gas system is also partly dependent on electricity for its ability to deliver natural gas from the well-head to the consumer, the question arises of whether, in the event of an electric grid failure, the natural gas would continue to flow. As the natural gas transmission system largely uses natural gas from the pipelines as a source of power, once the gas has been extracted from the ground, the system is less dependent on the electric grid. However, some of the drilling rigs, processing units, and pipeline compressors do depend on electric power, making the vulnerability to the system to a disruption in the national electricity supply network vary depending on the cause, breadth, and geographic location of the disruption. This is due to the large numbers of players in the natural gas production and

N. Judson; N. Judson

2013-01-01T23:59:59.000Z

173

Arrowhead Center: Modeling Energy Market Volatility Report Title: Modeling Energy Market Volatility  

E-Print Network [OSTI]

in New Mexico 2 2 US Oil Rig Counts and WTI Spot Prices January 2000 to December 2009 7 3 US Natural Gas GDP: Percent Change from Standard National Control, Summary 17 12 New Mexico Oil and Gas Extraction Employment: Percent Change from Standard National Control, Detail Level 18 13 New Mexico Oil Total Employment

Johnson, Eric E.

174

E-Print Network 3.0 - alpha particle counting Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

alpha particles. (b) Daily cosmic ray count rate... alpha particles from SWOOPS. (b) Hourly average cosmic ray count rate from COSPINKET instrument. (c... particle...

175

JOURNAL DE PHYSIQUE CoZZoque C7, suppte'ment au n07, Tome 40, JuiZZet 1979, page C7-477 THE RF-ION SOURCE RIG 10FOR INTENSEHYDROGEN ION BEAMS  

E-Print Network [OSTI]

- are accelerated,too, by the s w mechanism. We obtain an intense electrodeless, non-them1 rf-plasma. The ham- advantages of our rf-plasma source called RIG 10 (-Radio-Frequency- Ion-erator of 10 an in diameter): This type of ion- source has no discharge electrodes immersed in the discharge plasma

Paris-Sud XI, Université de

176

31 Aug 2009 (updated 31 Aug 2009) SLAC-I-730-0A21J-031-R000 1 of 1 Hoisting and Rigging: Mobile Crane Pre-use Inspection Form  

E-Print Network [OSTI]

://www- group.slac.stanford.edu/esh/eshmanual/references/hoistingFormMobile.pdf Revision Record: https://www- internal.slac.stanford.edu/esh/docreview/reports/revisions.asp?ProductID=464 Department: Field Safety and Building Inspection Office Program: Hoisting and Rigging Authority: ESH Manual, Chapter 41, "Hoisting

Wechsler, Risa H.

177

Evaluation of using cyclocranes to support drilling & production of oil & gas in wetland areas. Sixth quarterly technical progress report, incorporating milestone schedule/status, October 1993--December 1993  

SciTech Connect (OSTI)

This report is a progress report on a planned program falling under wetlands area research related to drilling, production, and transportation of oil and gas resources. Specifically the planned program addresses an evaluation of using cyclocraft to transport drill rigs, mud, pipes and other materials and equipment in a cost effective and environmentally safe manner to support oil and gas drilling and production operations in wetland areas. During this period, task 5, subscale tests, and task 7, environmental impacts, were completed. Work was continued on task 10, technology transfer, and the preparation of the final report as part of task 11.

Eggington, W.J.

1994-04-01T23:59:59.000Z

178

Quantum Physics and Signal Processing in Rigged Hilbert Spaces by means of Special Functions, Lie Algebras and Fourier and Fourier-like Transforms  

E-Print Network [OSTI]

Quantum Mechanics and Signal Processing in the line R, are strictly related to Fourier Transform and Weyl-Heisenberg algebra. We discuss here the addition of a new discrete variable that measures the degree of the Hermite functions and allows to obtain the projective algebra io(2). A Rigged Hilbert space is found and a new discrete basis in R obtained. The operators {O[R]} defined on R are shown to belong to the Universal Enveloping Algebra UEA[io(2)] allowing, in this way, their algebraic discussion. Introducing in the half-line a Fourier-like Transform, the procedure is extended to R^+ and can be easily generalized to R^n and to spherical reference systems.

Enrico Celeghini; Mariano A. del Olmo

2014-11-11T23:59:59.000Z

179

Production of Onshore Lower-48 Oil and Gas-model methodology and data description. [PROLOG  

SciTech Connect (OSTI)

This report documents the methodology and data used in the Production of Onshore Lower-48 Oil and Gas (PROLOG) model. The model forecasts annual oil and natural gas production on a regional basis. A linear program is used to select drilling activities for conventional oil and gas on the basis of their economic merit, subject to constraints on available rotary rigs and constraints based on historical drilling patterns. Using an exogenously specified price path, net present values are computed for fixed amounts of drilling activity for oil and gas, and for exploration and development in each of six onshore regions. Forecasts of drilling for enhanced gas recovery (EGR) are exogenously determined, and this drilling is included when considering the constraints on drilling rigs. The report is organized as follows. Chapter 2 is a general overview of the model, describing the major characteristics of the methodology and the logical interaction of the various modules. Chapter 3 specifies the structure of the linear program including the equations for the objective function and the constraints. The details of the methodology used to model exploratory, developmental, and deep gas drilling are presented in Chapters 4-6, respectively. Chapter 7 presents a discussion of the economic evaluation which takes place in each discounted cash flow calculation performed by the model. Cost equations are presented, and various user-specified options as to how to incorporate these costs are discussed. Methodological details and equations used to model finding rates and revisions are given in Chapter 8. Possible areas of future enhancements to the PROLOG model are presented in Chapter 9.

Carlson, M.; Kurator, W.; Mariner-Volpe, B.; O'Neill, R.; Trapmann, W.

1982-06-01T23:59:59.000Z

180

Compensated count-rate circuit for radiation survey meter  

DOE Patents [OSTI]

A count-rate compensating circuit is provided which may be used in a portable Geiger-Mueller (G-M) survey meter to ideally compensate for counting loss errors in the G-M tube detector. In a G-M survey meter, wherein the pulse rate from the G-M tube is converted into a pulse rate current applied to a current meter calibrated to indicate dose rate, the compensated circuit generates and controls a reference voltage in response to the rate of pulses from the detector. This reference voltage is gated to the current-generating circuit at a rate identical to the rate of pulses coming from the detector so that the current flowing through the meter is varied in accordance with both the frequency and amplitude of the reference voltage pulses applied thereto so that the count rate is compensated ideally to indicate a true count rate within 1% up to a 50% duty cycle for the detector. A positive feedback circuit is used to control the reference voltage so that the meter output tracks true count rate indicative of the radiation dose rate.

Todd, Richard A. (Powell, TN)

1981-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "gas rig counts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Industrial Gas Turbine Engine Catalytic Pilot Combustor-Prototype Testing  

SciTech Connect (OSTI)

PCI has developed and demonstrated its Rich Catalytic Lean-burn (RCL®) technology for industrial and utility gas turbines to meet DOEâ??s goals of low single digit emissions. The technology offers stable combustion with extended turndown allowing ultra-low emissions without the cost of exhaust after-treatment and further increasing overall efficiency (avoidance of after-treatment losses). The objective of the work was to develop and demonstrate emission benefits of the catalytic technology to meet strict emissions regulations. Two different applications of the RCL® concept were demonstrated: RCL® catalytic pilot and Full RCL®. The RCL® catalytic pilot was designed to replace the existing pilot (a typical source of high NOx production) in the existing Dry Low NOx (DLN) injector, providing benefit of catalytic combustion while minimizing engine modification. This report discusses the development and single injector and engine testing of a set of T70 injectors equipped with RCL® pilots for natural gas applications. The overall (catalytic pilot plus main injector) program NOx target of less than 5 ppm (corrected to 15% oxygen) was achieved in the T70 engine for the complete set of conditions with engine CO emissions less than 10 ppm. Combustor acoustics were low (at or below 0.1 psi RMS) during testing. The RCL® catalytic pilot supported engine startup and shutdown process without major modification of existing engine controls. During high pressure testing, the catalytic pilot showed no incidence of flashback or autoignition while operating over a wide range of flame temperatures. In applications where lower NOx production is required (i.e. less than 3 ppm), in parallel, a Full RCL® combustor was developed that replaces the existing DLN injector providing potential for maximum emissions reduction. This concept was tested at industrial gas turbine conditions in a Solar Turbines, Incorporated high-pressure (17 atm.) combustion rig and in a modified Solar Turbines, Incorporated Saturn engine rig. High pressure single-injector rig and modified engine rig tests demonstrated NOx less than 2 ppm and CO less than 10 ppm over a wide flame temperature operating regime with low combustion noise (<0.15% peak-to-peak). Minimum NOx for the optimized engine retrofit Full RCL® designs was less than 1 ppm with CO emissions less than 10 ppm. Durability testing of the substrate and catalyst material was successfully demonstrated at pressure and temperature showing long term stable performance of the catalytic reactor element. Stable performance of the reactor element was achieved when subjected to durability tests (>5000 hours) at simulated engine conditions (P=15 atm, Tin=400C/750F.). Cyclic tests simulating engine trips was also demonstrated for catalyst reliability. In addition to catalyst tests, substrate oxidation testing was also performed for downselected substrate candidates for over 25,000 hours. At the end of the program, an RCL® catalytic pilot system has been developed and demonstrated to produce NOx emissions of less than 3 ppm (corrected to 15% O2) for 100% and 50% load operation in a production engine operating on natural gas. In addition, a Full RCL® combustor has been designed and demonstrated less than 2 ppm NOx (with potential to achieve 1 ppm) in single injector and modified engine testing. The catalyst/substrate combination has been shown to be stable up to 5500 hrs in simulated engine conditions.

Shahrokh Etemad; Benjamin Baird; Sandeep Alavandi; William Pfefferle

2009-09-30T23:59:59.000Z

182

Phase transitions in full counting statistics for periodic pumping  

E-Print Network [OSTI]

We discuss the problem of full counting statistics for periodic pumping. The probability generating function is usually defined on a circle of the "physical" values of the counting parameter, with its periodicity corresponding to charge quantization. The extensive part of the generating function can either be an analytic function on this circle or have singularities. These two cases may be interpreted as different thermodynamic phases in time domain. We discuss several examples of phase transitions between these phases for classical and quantum systems. Finally, we prove a criterion for the "analytic" phase in the problem of a quantum pump for noninteracting fermions.

Dmitri A. Ivanov; Alexander G. Abanov

2010-07-16T23:59:59.000Z

183

Proceedings of Symposia in Pure Mathematics Nodal domains on graphs -How to count them and why?  

E-Print Network [OSTI]

century by the pioneering work of Chladni on the nodal structures of vibrating plates. Counting nodal

Smilansky, Uzy

184

Development of a Low NOx Medium sized Industrial Gas Turbine Operating on Hydrogen-Rich Renewable and Opportunity Fuels  

SciTech Connect (OSTI)

This report presents the accomplishments at the completion of the DOE sponsored project (Contract # DE-FC26-09NT05873) undertaken by Solar Turbines Incorporated. The objective of this 54-month project was to develop a low NOx combustion system for a medium sized industrial gas turbine engine operating on Hydrogen-rich renewable and opportunity Fuels. The work in this project was focused on development of a combustion system sized for 15MW Titan 130 gas turbine engine based on design analysis and rig test results. Although detailed engine evaluation of the complete system is required prior to commercial application, those tasks were beyond the scope of this DOE sponsored project. The project tasks were organized in three stages, Stages 2 through 4. In Stage 2 of this project, Solar Turbines Incorporated characterized the low emission capability of current Titan 130 SoLoNOx fuel injector while operating on a matrix of fuel blends with varying Hydrogen concentration. The mapping in this phase was performed on a fuel injector designed for natural gas operation. Favorable test results were obtained in this phase on emissions and operability. However, the resulting fuel supply pressure needed to operate the engine with the lower Wobbe Index opportunity fuels would require additional gas compression, resulting in parasitic load and reduced thermal efficiency. In Stage 3, Solar characterized the pressure loss in the fuel injector and developed modifications to the fuel injection system through detailed network analysis. In this modification, only the fuel delivery flowpath was modified and the air-side of the injector and the premixing passages were not altered. The modified injector was fabricated and tested and verified to produce similar operability and emissions as the Stage 2 results. In parallel, Solar also fabricated a dual fuel capable injector with the same air-side flowpath to improve commercialization potential. This injector was also test verified to produce 15-ppm NOx capability on high Hydrogen fuels. In Stage 4, Solar fabricated a complete set of injectors and a combustor liner to test the system capability in a full-scale atmospheric rig. Extensive high-pressure single injector rig test results show that 15-ppm NOx guarantee is achievable from 50% to 100% Load with fuel blends containing up to 65% Hydrogen. Because of safety limitations in Solar Test Facility, the atmospheric rig tests were limited to methane-based fuel blends. Further work to validate the durability and installed engine capability would require long-term engine field test.

Srinivasan, Ram

2013-07-31T23:59:59.000Z

185

U.S. Natural Gas Count of Underground Storage Capacity (Number of Elements)  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelinesProved ReservesFeet)per Thousand28 198 18 QInternationalYear Jan Feb Mar Apr May Jun

186

U.S. Natural Gas Count of Underground Storage Capacity (Number of Elements)  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines AboutDecemberSteamYearTexas--StateWinter 2013-14 WellsDecadeCubic Feet)Gulf of

187

U.S. Natural Gas Count of Underground Storage Capacity (Number of Elements)  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2007York"Hawaii" "Sector", (MillionDecade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5Year

188

Transport coefficients of a massive pion gas  

E-Print Network [OSTI]

We review or main results concerning the transport coefficients of a light meson gas, in particular we focus on the case of a massive pion gas. Leading order results according to the chiral power-counting are presented for the DC electrical conductivity, thermal conductivity, shear viscosity, and bulk viscosity. We also comment on the possible correlation between the bulk viscosity and the trace anomaly in QCD, as well as the relation between unitarity and a minimum of the quotient $\\eta/s$ near the phase transition.

D. Fernandez-Fraile; A. Gomez Nicola

2009-12-20T23:59:59.000Z

189

Compensated count-rate circuit for radiation survey meter  

DOE Patents [OSTI]

A count-rate compensating circuit is provided which may be used in a portable Geiger-Mueller (G-M) survey meter to ideally compensate for couting loss errors in the G-M tube detector. In a G-M survey meter, wherein the pulse rate from the G-M tube is converted into a pulse rate current applied to a current meter calibrated to indicate dose rate, the compensation circuit generates and controls a reference voltage in response to the rate of pulses from the detector. This reference voltage is gated to the current-generating circuit at a rate identical to the rate of pulses coming from the detector so that the current flowing through the meter is varied in accordance with both the frequency and amplitude of the reference voltage pulses applied thereto so that the count rate is compensated ideally to indicate a true count rate within 1% up to a 50% duty cycle for the detector. A positive feedback circuit is used to control the reference voltage so that the meter output tracks true count rate indicative of the radiation dose rate.

Todd, R.A.

1980-05-12T23:59:59.000Z

190

Note on refined topological vertex, Jack polynomials and instanton counting  

E-Print Network [OSTI]

In this article, we calculated the refined topological vertex for the one parameter case using the Jack symmetric functions. Also, we obtain the partition function for elliptic N=2 models, the results coincide with those of Nekrasov instanton counting partition functions for the $N=2^{\\ast}$ theories.

Jianfeng Wu

2010-12-10T23:59:59.000Z

191

Counts of northern elephant seals, Mirounga angustirostris, from  

E-Print Network [OSTI]

176 Counts of northern elephant seals, Mirounga angustirostris, from large-format aerial northern elephant seals, Mirounga angustirostris, at rooker- ies in the United States and Mexico elephant seals (Bar- tholomew and Boolootian, 1960; Carlisle andAplin, 1966, 1971; Odell, 1971;Antonelis et

192

Counting Complexity Classes over the Reals I: The Additive Case  

E-Print Network [OSTI]

2 1 Faculty of Computer Science, Electrical Engineering, and Mathematics Paderborn University, D with the goal of providing numerical computations (as performed e.g., in numerical analysis or computational counting classes in the model of addi- tive BSS-machines [15]. The computation nodes of these machines

Bürgisser, Peter

193

MA10209 Algebra 1A Counting Partitions: GCS  

E-Print Network [OSTI]

a slightly different question. How many ways are there to partition five people into three teams, one of sizeMA10209 Algebra 1A Counting Partitions: GCS 30-x-11 The course website is http://people on enumerating partitions. Suppose that you have five people, and you wish to put them into three teams: a blue

Smith, Geoff

194

Pin-Count-Aware Online Testing of Digital Microfluidic Biochips  

E-Print Network [OSTI]

Pin-Count-Aware Online Testing of Digital Microfluidic Biochips Yang Zhao and Krishnendu, and bioassay malfunctions in microfluidic biochips. To reduce product cost for disposable biochips, testing microfluidics is an emerging technology that pro- vides fluid-handling capability on a chip [1]. By reducing

Chakrabarty, Krishnendu

195

Number counts in homogeneous and inhomogeneous dark energy models  

E-Print Network [OSTI]

In the simple case of a constant equation of state, redshift distribution of collapsed structures may constrain dark energy models. Different dark energy models having the same energy density today but different equations of state give quite different number counts. Moreover, we show that introducing the possibility that dark energy collapses with dark matter (``inhomogeneous'' dark energy) significantly complicates the picture. We illustrate our results by comparing four dark energy models to the standard $\\Lambda$-model. We investigate a model with a constant equation of state equal to -0.8, a phantom energy model and two scalar potentials (built out of a combination of two exponential terms). Although their equations of state at present are almost indistinguishable from a $\\Lambda$-model, both scalar potentials undergo quite different evolutions at higher redshifts and give different number counts. We show that phantom dark energy induces opposite departures from the $\\Lambda$-model as compared with the other models considered here. Finally, we find that inhomogeneous dark energy enhances departures from the $\\Lambda$-model with maximum deviations of about 15% for both number counts and integrated number counts. Larger departures from the $\\Lambda$-model are obtained for massive structures which are rare objects making it difficult to statistically distinguish between models.

N. J. Nunes; A. C. da Silva; N. Aghanim

2006-02-01T23:59:59.000Z

196

Bicycle and pedestrian counting initiative monitors nonmotorized traffic in Minnesota  

E-Print Network [OSTI]

Bicycle and pedestrian counting initiative monitors nonmotorized traffic in Minnesota transitways of Transportation (MnDOT) to develop guidelines and analyze information collected in bicycle and pedestrian traffic methods for monitoring and assessing bicycle and pedestrian traffic that can be used in both permanent

Minnesota, University of

197

29Counting Atoms in a Molecule The complex molecule Propanal  

E-Print Network [OSTI]

29Counting Atoms in a Molecule The complex molecule Propanal was discovered in a dense interstellar is the ratio of carbon atoms to hydrogen atoms in propanal? Problem 4 - If the mass of a hydrogen atom of a propanal molecule in AMUs? Problem 5 - What is the complete chemical formula for propanal? C3 H __ O

198

Electromagnetic fields and transport coefficients in a hot pion gas  

E-Print Network [OSTI]

We present recent results on finite temperature electromagnetic form factors and the electrical conductivity in a pion gas. The standard Chiral Perturbation Theory power counting needs to be modified for transport coefficients. We pay special attention to unitarity and to possible applications for dilepton and photon production.

A. Gomez Nicola; D. Fernandez-Fraile

2006-08-24T23:59:59.000Z

199

Final report on evaluation of cyclocraft support of oil and gas operations in wetland areas  

SciTech Connect (OSTI)

The cyclocraft is a proven hybrid aircraft, capable of VTOL, lifting heavy and bulky loads, highly controllable, having high safety characteristics and low operating costs. Mission Research Corporation (MRC), under Department of Energy sponsorship, is evaluating the potential use of cyclocraft in the transport of drill rigs, mud, pipes and other materials and equipment, in a cost effective and environmentally safe manner, to support oil and gas drilling, production, and transportation operations in wetland areas. Based upon the results of an earlier parametric study, a cyclocraft design, having a payload capacity of 45 tons and designated H.1 Cyclocraft, was selected for further study, including the preparation of a preliminary design and a development plan, and the determination of operating costs. This report contains all of the results derived from the program to evaluate the use of cyclocraft in the support of oil and gas drilling and production operations in wetland areas.

Eggington, W.J.; Stevens, P.M.; John, C.J.; Harder, B.J.; Lindstedt, D.M.

1994-10-01T23:59:59.000Z

200

Total Gamma Count Rate Analysis Method for Nondestructive Assay Characterization  

SciTech Connect (OSTI)

A new approach to nondestructively characterize waste for disposal, based on total gamma response, has been developed at the Idaho Cleanup Project by CH2M-WG Idaho, LLC and Idaho State University, and is called the total gamma count rate analysis method. The total gamma count rate analysis method measures gamma interactions that produce energetic electrons or positrons in a detector. Based on previous experience with waste assays, the radionuclide content of the waste container is then determined. This approach potentially can yield minimum detection limits of less than 10 nCi/g. The importance of this method is twofold. First, determination of transuranic activity can be made for waste containers that are below the traditional minimum detection limits. Second, waste above 10 nCi/g and below 100 nCi/g can be identified, and a potential path for disposal resolved.

Cecilia R. Hoffman; Yale D. Harker

2006-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "gas rig counts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Melt Infiltrated Ceramic Composites (Hipercomp) for Gas Turbine Engine Applications  

SciTech Connect (OSTI)

This report covers work performed under the Continuous Fiber Ceramic Composites (CFCC) program by GE Global Research and its partners from 1994 through 2005. The processing of prepreg-derived, melt infiltrated (MI) composite systems based on monofilament and multifilament tow SiC fibers is described. Extensive mechanical and environmental exposure characterizations were performed on these systems, as well as on competing Ceramic Matrix Composite (CMC) systems. Although current monofilament SiC fibers have inherent oxidative stability limitations due to their carbon surface coatings, the MI CMC system based on multifilament tow (Hi-Nicalon ) proved to have excellent mechanical, thermal and time-dependent properties. The materials database generated from the material testing was used to design turbine hot gas path components, namely the shroud and combustor liner, utilizing the CMC materials. The feasibility of using such MI CMC materials in gas turbine engines was demonstrated via combustion rig testing of turbine shrouds and combustor liners, and through field engine tests of shrouds in a 2MW engine for >1000 hours. A unique combustion test facility was also developed that allowed coupons of the CMC materials to be exposed to high-pressure, high-velocity combustion gas environments for times up to {approx}4000 hours.

Gregory Corman; Krishan Luthra

2005-09-30T23:59:59.000Z

202

Replacing Motors Counting Savings: Results from a 100 Motor Study  

E-Print Network [OSTI]

REPLACING MOTORS, COUNTING SAVINGS: RESULTS FROM A 100 MOTOR STUDY Nicole M. Kaufman Motor Systems Engineer Advanced Energy Raleigh, NC ABSTRACT Software tools such as MotorMaster+ aid facility personnel in conducting payback... analyses for replacing motors. These tools make assumptions on the motors’ operational efficiency in their calculations. By observing 100 pre-EPCA (Energy Policy & Conservation Act) motors in operation, removing them from service and conducting IEEE...

Kaufman, N. M.

2006-01-01T23:59:59.000Z

203

Power Counting Regime of Chiral Extrapolation and Beyond  

E-Print Network [OSTI]

Finite-range regularised (FRR) chiral effective field theory is presented in the context of approximation schemes ubiquitous in modern lattice QCD calculations. Using FRR techniques, the power-counting regime (PCR) of chiral perturbation theory can be estimated. To fourth-order in the expansion at the 1% tolerance level, we find m_\\pi < 180 MeV for the PCR, extending only a small distance beyond the physical pion mass.

Derek B. Leinweber; Anthony W. Thomas; Ross D. Young

2005-10-12T23:59:59.000Z

204

Power spectrum of the fluctuation of Chebyshev's prime counting function  

E-Print Network [OSTI]

The one-sided power spectrum of the fluctuation of Chebyshev's weighted prime counting function is numerically estimated based on samples of the fluctuating function of different sizes. The power spectrum is also estimated analytically for large frequency based on Riemann hypothesis and the exact formula for the fluctuating function in terms of all the non-trivial Riemann zeroes. Our analytical estimate is consistent with our numerical estimate of a 1/f^2 power spectrum.

Boon Leong Lan; Shaohen Yong

2005-06-20T23:59:59.000Z

205

Counting states in the Bousso-Polchinski Landscape  

E-Print Network [OSTI]

Starting from an exact counting of small and positive cosmological constant states in the Bousso-Polchinski Landscape we recover a well-known approximate formula and a systematic method of improvement by means of the Poisson summation formula. This is a contribution to the special Volume published by the University of Zaragoza in honor of Julio Abad Anto\\~nanzas. En memoria de nuestro amigo, compa\\~nero y maestro Julio.

Cesar Asensio; Antonio Segui

2009-03-11T23:59:59.000Z

206

Automatic alpha-track counting with image analysis systems  

E-Print Network [OSTI]

to establish an explanation of why an increased calibration factor, for a track counting system, is observed with increasing photometer readings. Second, TSD measurements were made for films irradiated with a depleted uranium source in order to determine... the usefulness of uranium as a fast exposure facility for quality control (QC) films for the etch process. The results of this work concluded that uranium was not a good QC source for the current etching process for the exposure methods used. Finally, total...

Shymanski, Michael Joseph

2012-06-07T23:59:59.000Z

207

Modelling ISO Galaxy Counts with Luminosity and Merger Rate Evolution  

E-Print Network [OSTI]

We model galaxy evolution in the 6.75 and 15 micron passbands of the ISO satellite, by combining models of galaxy evolution at optical wavelengths (which are consistent with the optical galaxy counts) with observed spectral energy distributions in the infra-red. Our model is consistent with the local 12 micron galaxy luminosity, if 3.5 per cent of spirals at z=0 are in interacting pairs with mid-infra-red luminosities enhanced by major starbursts. Source counts from deep ISO surveys exceed non-evolving predictions but are more consistent with our evolving model. The steep number count of 6.75 micron sources appears to be explained primarily by evolving early-type galaxies, whereas at 15 microns the main contributors are star-forming spirals and starbursting interacting/merging galaxies. The 31 per cent of 15 micron sources which are visibly interacting galaxies have high mid-infra-red/optical flux ratios indicating major starbursts combined with dust extinction. The numbers and high mean redshift of these sources suggest the merger-starbursts are increasing in luminosity with redshift, approximately as (1+z)^2, in addition to undergoing (1+z)^2 number evolution reflecting the optically observed increase with redshift in the fraction of interacting galaxies.

Nathan Roche; Steve Eales

1998-12-10T23:59:59.000Z

208

Gas sensor  

DOE Patents [OSTI]

A gas sensor is described which incorporates a sensor stack comprising a first film layer of a ferromagnetic material, a spacer layer, and a second film layer of the ferromagnetic material. The first film layer is fabricated so that it exhibits a dependence of its magnetic anisotropy direction on the presence of a gas, That is, the orientation of the easy axis of magnetization will flip from out-of-plane to in-plane when the gas to be detected is present in sufficient concentration. By monitoring the change in resistance of the sensor stack when the orientation of the first layer's magnetization changes, and correlating that change with temperature one can determine both the identity and relative concentration of the detected gas. In one embodiment the stack sensor comprises a top ferromagnetic layer two mono layers thick of cobalt deposited upon a spacer layer of ruthenium, which in turn has a second layer of cobalt disposed on its other side, this second cobalt layer in contact with a programmable heater chip.

Schmid, Andreas K.; Mascaraque, Arantzazu; Santos, Benito; de la Figuera, Juan

2014-09-09T23:59:59.000Z

209

Proceedings of Symposia in Pure Mathematics Nodal domains on graphs -How to count them and why?  

E-Print Network [OSTI]

by the pioneering work of Chladni on the nodal structures of vibrating plates. Counting nodal domains started

Smilansky, Uzy

210

NATURAL GAS MARKET ASSESSMENT  

E-Print Network [OSTI]

CALIFORNIA ENERGY COMMISSION NATURAL GAS MARKET ASSESSMENT PRELIMINARY RESULTS In Support.................................................................................... 6 Chapter 2: Natural Gas Demand.................................................................................................. 10 Chapter 3: Natural Gas Supply

211

Automatic fruit recognition and counting from multiple images1 , C.A. Glasbey a,  

E-Print Network [OSTI]

Automatic fruit recognition and counting from multiple images1 Y. Songa , C.A. Glasbey a, , G.e. measuring the observable characteristics of living10 organisms, such as counting the number of fruits and counting fruits from images12 in cluttered greenhouses. The plants are 3-metre high peppers with fruits

Glasbey, Chris

212

Optical People Counting for Demand Controlled Ventilation: A Pilot Study of Counter Performance  

SciTech Connect (OSTI)

This pilot scale study evaluated the counting accuracy of two people counting systems that could be used in demand controlled ventilation systems to provide control signals for modulating outdoor air ventilation rates. The evaluations included controlled challenges of the people counting systems using pre-planned movements of occupants through doorways and evaluations of counting accuracies when naive occupants (i.e., occupants unaware of the counting systems) passed through the entrance doors of the building or room. The two people counting systems had high counting accuracy accuracies, with errors typically less than 10percent, for typical non-demanding counting events. However, counting errors were high in some highly challenging situations, such as multiple people passing simultaneously through a door. Counting errors, for at least one system, can be very high if people stand in the field of view of the sensor. Both counting system have limitations and would need to be used only at appropriate sites and where the demanding situations that led to counting errors were rare.

Fisk, William J.; Sullivan, Douglas

2009-12-26T23:59:59.000Z

213

Neutron counting and gamma spectroscopy with PVT detectors.  

SciTech Connect (OSTI)

Radiation portals normally incorporate a dedicated neutron counter and a gamma-ray detector with at least some spectroscopic capability. This paper describes the design and presents characterization data for a detection system called PVT-NG, which uses large polyvinyl toluene (PVT) detectors to monitor both types of radiation. The detector material is surrounded by polyvinyl chloride (PVC), which emits high-energy gamma rays following neutron capture reactions. Assessments based on high-energy gamma rays are well suited for the detection of neutron sources, particularly in border security applications, because few isotopes in the normal stream of commerce have significant gamma ray yields above 3 MeV. Therefore, an increased count rate for high-energy gamma rays is a strong indicator for the presence of a neutron source. The sensitivity of the PVT-NG sensor to bare {sup 252}Cf is 1.9 counts per second per nanogram (cps/ng) and the sensitivity for {sup 252}Cf surrounded by 2.5 cm of polyethylene is 2.3 cps/ng. The PVT-NG sensor is a proof-of-principal sensor that was not fully optimized. The neutron detector sensitivity could be improved, for instance, by using additional moderator. The PVT-NG detectors and associated electronics are designed to provide improved resolution, gain stability, and performance at high-count rates relative to PVT detectors in typical radiation portals. As well as addressing the needs for neutron detection, these characteristics are also desirable for analysis of the gamma-ray spectra. Accurate isotope identification results were obtained despite the common impression that the absence of photopeaks makes data collected by PVT detectors unsuitable for spectroscopic analysis. The PVT detectors in the PVT-NG unit are used for both gamma-ray and neutron detection, so the sensitive volume exceeds the volume of the detection elements in portals that use dedicated components to detect each type of radiation.

Mitchell, Dean James; Brusseau, Charles A.

2011-06-01T23:59:59.000Z

214

Experimental research on emission and removal of dioxins in flue gas from a co-combustion of MSW and coal incinerator  

SciTech Connect (OSTI)

This paper describes the experimental study of dioxins removal from flue gas from a co-combustion municipal solid waste and coal incinerator by means of a fluidized absorption tower and a fabric filter. A test rig has been set up. The flow rate of flue gas of the test rig is 150-2000 m{sup 3}/h. The system was composed of a humidification and cooling system, an absorption tower, a demister, a slurry make-up tank, a desilter, a fabric filter and a measurement system. The total height of the absorption tower was 6.5 m, and the diameter of the reactor pool was 1.2 m. When the absorbent was 1% limestone slurry, the recirculation ratio was 3, the jet rate was 5-15 m/s and the submerged depth of the bubbling pipe under the slurry was 0.14 m, the removal efficiency for dioxins was 99.35%. The concentration of dioxins in the treated flue gas was 0.1573 x 10{sup -13} kg/Nm{sup 3} and the concentration of oxygen was 11%. This concentration is comparable to the emission standards of other developed countries.

Zhong Zhaoping [Department of Power Engineering, Research Institute of Thermal Energy Engineering, Key Laboratory of Clean Coal Power Generation and Combustion Technology of Ministry of Education, Southeast University, Nanjing 210096 (China)]. E-mail: zzhong@seu.edu.cn; Jin Baosheng [Department of Power Engineering, Research Institute of Thermal Energy Engineering, Key Laboratory of Clean Coal Power Generation and Combustion Technology of Ministry of Education, Southeast University, Nanjing 210096 (China); Huang Yaji [Department of Power Engineering, Research Institute of Thermal Energy Engineering, Key Laboratory of Clean Coal Power Generation and Combustion Technology of Ministry of Education, Southeast University, Nanjing 210096 (China); Zhou Hongcang [Department of Power Engineering, Research Institute of Thermal Energy Engineering, Key Laboratory of Clean Coal Power Generation and Combustion Technology of Ministry of Education, Southeast University, Nanjing 210096 (China); Lan Jixiang [Department of Power Engineering, Research Institute of Thermal Energy Engineering, Key Laboratory of Clean Coal Power Generation and Combustion Technology of Ministry of Education, Southeast University, Nanjing 210096 (China)

2006-07-01T23:59:59.000Z

215

Metals processing control by counting molten metal droplets  

DOE Patents [OSTI]

Apparatus and method for controlling metals processing (e.g., ESR) by melting a metal ingot and counting molten metal droplets during melting. An approximate amount of metal in each droplet is determined, and a melt rate is computed therefrom. Impedance of the melting circuit is monitored, such as by calculating by root mean square a voltage and current of the circuit and dividing the calculated current into the calculated voltage. Analysis of the impedance signal is performed to look for a trace characteristic of formation of a molten metal droplet, such as by examining skew rate, curvature, or a higher moment.

Schlienger, Eric (Albuquerque, NM); Robertson, Joanna M. (Safford, AZ); Melgaard, David (Albuquerque, NM); Shelmidine, Gregory J. (Tijeras, NM); Van Den Avyle, James A. (Corrales, NM)

2000-01-01T23:59:59.000Z

216

Determination of glomerular filtration rate by external counting methods  

E-Print Network [OSTI]

comparing the DTPA to other accepted methods; the results were very favorable for the use of ggmTC-DTPA. Klopper et al. , sa1d mTc-DTPA ". . . rapidly prepared by a kit method, is a useful addition to the list of radiopharmaceuticals that can be used... points. First, the external counting method is suitable as a true means of determining the glomerular filtration rate (GFR). Second, the method is applicable to cats. To do this, five dogs were injected with ggmTc(Sn)-DTPA. Plasma samples were drawn...

Sartor, Tammy Lee

1981-01-01T23:59:59.000Z

217

Nissan: ISO 50001 - What Counts! | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in3.pdfEnergyDepartment of Energy Advanced Framing -Nissan: ISO 50001 - What Counts!

218

Georgia Tech Dangerous Gas  

E-Print Network [OSTI]

1 Georgia Tech Dangerous Gas Safety Program March 2011 #12;Georgia Tech Dangerous Gas Safety.......................................................................................................... 5 6. DANGEROUS GAS USAGE REQUIREMENTS................................................. 7 6.1. RESTRICTED PURCHASE/ACQUISITION RULES: ................................................ 7 7. FLAMMABLE GAS

Sherrill, David

219

Rigging and Hoisting Job Performance Measure (TQ-RIG-P)  

E-Print Network [OSTI]

performing associated job tasks by the individual identified above: _______ Equipment Operator Qualification equipment with equal or lower capacities. Overhead Crane Operator Qualifications (Mark those successfully demonstrated) Type Controls or PowerEquipment Type Ton Range/Limit Qualification Codes Manual Pendant Remote

Ohta, Shigemi

220

FAINT SUBMILLIMETER GALAXY COUNTS AT 450 {mu}m  

SciTech Connect (OSTI)

We present the results of SCUBA-2 observations at 450 {mu}m and 850 {mu}m of the field lensed by the massive cluster A370. With a total survey area >100 arcmin{sup 2} and 1{sigma} sensitivities of 3.92 and 0.82 mJy beam{sup -1} at 450 and 850 {mu}m, respectively, we find a secure sample of 20 sources at 450 {mu}m and 26 sources at 850 {mu}m with a signal-to-noise ratio (S/N) > 4. Using the latest lensing model of A370 and Monte Carlo simulations, we derive the number counts at both wavelengths. The 450 {mu}m number counts probe a factor of four deeper than the counts recently obtained from the Herschel Space Telescope at similar wavelengths, and we estimate that {approx}47%-61% of the 450 {mu}m extragalactic background light resolved into individual sources with 450 {mu}m fluxes greater than 4.5 mJy. The faint 450 {mu}m sources in the 4{sigma} sample have positional accuracies of 3 arcsec, while brighter sources (S/N >6{sigma}) are good to 1.4 arcsec. Using a deep radio map (1{sigma} {approx} 6 {mu}Jy) we find that the percentage of submillimeter sources having secure radio counterparts is 85% for 450 {mu}m sources with intrinsic fluxes >6 mJy and 67% for 850 {mu}m sources with intrinsic fluxes >4 mJy. We also find that 67% of the >4{sigma} 450 {mu}m sources are detected at 850 {mu}m, while the recovery rate at 450 {mu}m of >4{sigma} 850 {mu}m sources is 54%. Combined with the source redshifts estimated using millimetric flux ratios, the recovered rate is consistent with the scenario where both 450 {mu}m and 20 cm emission preferentially select lower redshift dusty sources, while 850 {mu}m emission traces a higher fraction of dusty sources at higher redshifts. We identify potential counterparts in various wavelengths from X-ray to mid-infrared and measure the multiwavelength photometry, which we then use to analyze the characteristics of the sources. We find three X-ray counterparts to our robust submillimeter sample (S/N > 5), giving an active galactic nucleus fraction for our 450 (850) {mu}m sample of 3/8 (3/9) or 38% (33%). We also find a correlation between the K{sub s} band and the 850 {mu}m/20 cm flux ratio.

Chen, Chian-Chou; Cowie, Lennox L.; Barger, Amy J.; Casey, Caitlin M.; Lee, Nicholas; Sanders, David B.; Williams, Jonathan P. [Institute for Astronomy, University of Hawaii, 2680 Woodlawn Drive, Honolulu, HI 96822 (United States)] [Institute for Astronomy, University of Hawaii, 2680 Woodlawn Drive, Honolulu, HI 96822 (United States); Wang, Wei-Hao [Academia Sinica Institute of Astronomy and Astrophysics, P.O. Box 23-141, Taipei 10617, Taiwan (China)] [Academia Sinica Institute of Astronomy and Astrophysics, P.O. Box 23-141, Taipei 10617, Taiwan (China)

2013-01-10T23:59:59.000Z

Note: This page contains sample records for the topic "gas rig counts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Development and Demonstration of Mobile, Small Footprint Exploration and Development Well System for Arctic Unconventional Gas Resources (ARCGAS)  

SciTech Connect (OSTI)

Traditionally, oil and gas field technology development in Alaska has focused on the high-cost, high-productivity oil and gas fields of the North Slope and Cook Inlet, with little or no attention given to Alaska's numerous shallow, unconventional gas reservoirs (carbonaceous shales, coalbeds, tight gas sands). This is because the high costs associated with utilizing the existing conventional oil and gas infrastructure, combined with the typical remoteness and environmental sensitivity of many of Alaska's unconventional gas plays, renders the cost of exploring for and producing unconventional gas resources prohibitive. To address these operational challenges and promote the development of Alaska's large unconventional gas resource base, new low-cost methods of obtaining critical reservoir parameters prior to drilling and completing more costly production wells are required. Encouragingly, low-cost coring, logging, and in-situ testing technologies have already been developed by the hard rock mining industry in Alaska and worldwide, where an extensive service industry employs highly portable diamond-drilling rigs. From 1998 to 2000, Teck Cominco Alaska employed some of these technologies at their Red Dog Mine site in an effort to quantify a large unconventional gas resource in the vicinity of the mine. However, some of the methods employed were not fully developed and required additional refinement in order to be used in a cost effective manner for rural arctic exploration. In an effort to offset the high cost of developing a new, low-cost exploration methods, the US Department of Energy, National Petroleum Technology Office (DOE-NPTO), partnered with the Nana Regional Corporation and Teck Cominco on a technology development program beginning in 2001. Under this DOE-NPTO project, a team comprised of the NANA Regional Corporation (NANA), Teck Cominco Alaska and Advanced Resources International, Inc. (ARI) have been able to adapt drilling technology developed for the mineral industry for use in the exploration of unconventional gas in rural Alaska. These techniques have included the use of diamond drilling rigs that core small diameter (< 3.0-inch) holes coupled with wireline geophysical logging tools and pressure transient testing units capable of testing in these slimholes.

Paul Glavinovich

2002-11-01T23:59:59.000Z

222

Refined BPS state counting from Nekrasov's formula and Macdonald functions  

E-Print Network [OSTI]

It has been argued that the Nekrasov's partition function gives the generating function of refined BPS state counting in the compactification of M theory on local Calabi-Yau spaces. We show that a refined version of the topological vertex we proposed before (hep-th/0502061) is a building block of the Nekrasov's partition function with two equivariant parameters. Compared with another refined topological vertex by Iqbal-Kozcaz-Vafa (hep-th/0701156), our refined vertex is expressed entirely in terms of the specialization of the Macdonald symmetric functions which is related to the equivariant character of the Hilbert scheme of points on C^2. We provide diagrammatic rules for computing the partition function from the web diagrams appearing in geometric engineering of Yang-Mills theory with eight supercharges. Our refined vertex has a simple transformation law under the flop operation of the diagram, which suggests that homological invariants of the Hopf link are related to the Macdonald functions.

Hidetoshi Awata; Hiroaki Kanno

2009-03-10T23:59:59.000Z

223

Counting of Sieber-Richter pairs of periodic orbits  

E-Print Network [OSTI]

In the framework of the semiclassical approach the universal spectral correlations in the Hamiltonian systems with classical chaotic dynamics can be attributed to the systematic correlations between actions of periodic orbits which (up to the switch in the momentum direction) pass through approximately the same points of the phase space. By considering symbolic dynamics of the system one can introduce a natural ultrametric distance between periodic orbits and organize them into clusters. Each cluster consists of orbits approaching closely each other in the phase space. We study the distribution of cluster sizes for the backer's map in the asymptotic limit of long trajectories. This problem is equivalent to the one of counting degeneracies in the length spectrum of the {\\it de Bruijn} graphs. Based on this fact, we derive the probability $\\P_k$ that $k$ randomly chosen periodic orbits belong to the same cluster. Furthermore, we find asymptotic behaviour of the largest cluster size $|\\Cll_{\\max}|$ and derive th...

Gutkin, Boris

2011-01-01T23:59:59.000Z

224

Fuel gas conditioning process  

DOE Patents [OSTI]

A process for conditioning natural gas containing C.sub.3+ hydrocarbons and/or acid gas, so that it can be used as combustion fuel to run gas-powered equipment, including compressors, in the gas field or the gas processing plant. Compared with prior art processes, the invention creates lesser quantities of low-pressure gas per unit volume of fuel gas produced. Optionally, the process can also produce an NGL product.

Lokhandwala, Kaaeid A. (Union City, CA)

2000-01-01T23:59:59.000Z

225

Hoisting & Rigging Lift Plan  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickr FlickrGuidedCH2MLLC History Publications

226

RMOTC - Field Information - Rig Specifications  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar HomePromising Science for1 20115, 2001Data sets Notice: As ofOnline

227

EIS-0201: Coyote Springs Cogeneration Project Morrow Count, Oregon  

Broader source: Energy.gov [DOE]

This environmental impact statement analyzes the protential impacts of the Coyote Springs Cogeneration Project, a proposed natural gas-fired cogeneration power plant near Boardman, Oregon. The proposed power plant would be built on a 22-acre site in the Port of Morrow Industrial Park. The plant would have two combustion turbines that would generate 440 average megawatts of energy when completed.

228

Pennsylvania's Natural Gas Future  

E-Print Network [OSTI]

1 Pennsylvania's Natural Gas Future Penn State Natural Gas Utilization Workshop Bradley Hall sales to commercial and industrial customers ­ Natural gas, power, oil · Power generation ­ FossilMMBtuEquivalent Wellhead Gas Price, $/MMBtu Monthly US Spot Oil Price, $/MMBtu* U.S. Crude Oil vs. Natural Gas Prices, 2005

Lee, Dongwon

229

Evaluation of using cyclocranes to support drilling and production of oil and gas in wetland areas. Fourth quarterly technical progress report, Second quarter, 1993  

SciTech Connect (OSTI)

The planned program falls under wetlands area research related to drilling, production, and transportation of oil and gas resources. Specifically the planned program addresses an evaluation of using cyclocraft to transport drill rigs, mud, pipes and other materials and equipment in a cost effective and environmentally safe manner to support oil and gas drilling and production operations in wetland areas. The cyclocraft is a proven hybrid aircraft that utilizes aerostatic and aerodynamic lift. This type of aircraft has considerable payload capacity, VTOL capability, high controllability, low operating cost, low downwash and high safety. The benefits of using a cyclocraft to transport drill rigs and materials over environmentally-sensitive surfaces would be significant. The cyclocraft has considerable cost and operational advantages over the helicopter. The major activity during the second quarter of 1993 was focussed on completion of Task 4, Preliminary Design. The selected design has been designated H.1 Cyclocraft by MRC. Also during the report period, Task 6, Ground Support, was completed and a report containing the results was submitted to DOE. This task addressed the complete H.1 Cyclocraft system, i.e. it included the need personnel, facilities and equipment to support cyclocraft operations in wetland areas.

Eggington, W.J.

1993-09-01T23:59:59.000Z

230

Evaluation of using cyclocranes to support drilling and production of oil and gas in wetland areas. Fifth quarterly technical progress report, Third quarter, 1993  

SciTech Connect (OSTI)

The planned program falls under wetlands area research related to drilling, production, and transportation of oil and gas resources. Specifically the planned program addresses an evaluation of using cyclocraft to transport drill rigs, mud, pipes and other materials and equipment in a cost effective and environmentally safe manner to support oil and gas drilling and production operations in wetland areas. The cyclocraft is a proven hybrid aircraft that utilizes aerostatic and aerodynamic lift. This type of aircraft has considerable payload capacity, VTOL capability, high controllability, low operating cost, low downwash and high safety. The benefits of using a cyclocraft to transport drill rigs and materials over environmentally-sensitive surfaces would be significant. The cyclocraft has considerable cost and operational advantages over the helicopter. In 1992, Task 1, Environmental Considerations, and Task 2, Transport Requirements, were completed. In the first two quarters of 1993, Task 3, Parametric Analysis, Task 4, Preliminary Design, and Task 6, Ground Support, were completed. Individual reports containing results obtained from each of these tasks were submitted to DOE. In addition, through June 30, 1993, a Subscale Test Plan was prepared under Task 5, Subscale Tests, and work was initiated on Task 7, Environmental Impacts, Task 8, Development Plan, Task 9, Operating Costs, and Task 10, Technology Transfer.

Eggington, W.J.

1993-12-31T23:59:59.000Z

231

Transport properties of a meson gas  

E-Print Network [OSTI]

We present recent results on a systematic method to calculate transport coefficients for a meson gas (in particular, we analyze a pion gas) at low temperatures in the context of Chiral Perturbation Theory. Our method is based on the study of Feynman diagrams with a power counting which takes into account collisions in the plasma by means of a non-zero particle width. In this way, we obtain results compatible with analysis of Kinetic Theory with just the leading order diagram. We show the behavior with temperature of electrical and thermal conductivities and shear and bulk viscosities, and we discuss the fundamental role played by unitarity. We obtain that bulk viscosity is negligible against shear viscosity near the chiral phase transition. Relations between the different transport coefficients and bounds on them based on different theoretical approximations are also discussed. We also comment on some applications to heavy-ion collisions.

D. Fernandez-Fraile; A. Gomez Nicola

2007-07-09T23:59:59.000Z

232

Cryogenic, high-resolution x-ray detector with high count rate capability  

DOE Patents [OSTI]

A cryogenic, high-resolution X-ray detector with high count rate capability has been invented. The new X-ray detector is based on superconducting tunnel junctions (STJs), and operates without thermal stabilization at or below 500 mK. The X-ray detector exhibits good resolution (.about.5-20 eV FWHM) for soft X-rays in the keV region, and is capable of counting at count rates of more than 20,000 counts per second (cps). Simple, FET-based charge amplifiers, current amplifiers, or conventional spectroscopy shaping amplifiers can provide the electronic readout of this X-ray detector.

Frank, Matthias (Oakland, CA); Mears, Carl A. (Windsor, CA); Labov, Simon E. (Berkeley, CA); Hiller, Larry J. (Livermore, CA); Barfknecht, Andrew T. (Menlo Park, CA)

2003-03-04T23:59:59.000Z

233

Gas Storage Act (Illinois)  

Broader source: Energy.gov [DOE]

Any corporation which is engaged in or desires to engage in, the distribution, transportation or storage of natural gas or manufactured gas, which gas, in whole or in part, is intended for ultimate...

234

Gas Utilities (New York)  

Broader source: Energy.gov [DOE]

This chapter regulates natural gas utilities in the State of New York, and describes standards and procedures for gas meters and accessories, gas quality, line and main extensions, transmission and...

235

Industrial Gas Turbines  

Broader source: Energy.gov [DOE]

A gas turbine is a heat engine that uses high-temperature, high-pressure gas as the working fluid. Part of the heat supplied by the gas is converted directly into mechanical work. High-temperature,...

236

Gas Utilities (Maine)  

Broader source: Energy.gov [DOE]

Rules regarding the production, sale, and transfer of manufactured gas will also apply to natural gas. This section regulates natural gas utilities that serve ten or more customers, more than one...

237

Counting small RNA in disease-causing organisms  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to User GroupInformationE-GovNatural Gas

238

Gas Production Tax (Texas)  

Broader source: Energy.gov [DOE]

A tax of 7.5 percent of the market value of natural gas produced in the state of Texas is imposed on every producer of gas.

239

Natural gas dehydration apparatus  

DOE Patents [OSTI]

A process and corresponding apparatus for dehydrating gas, especially natural gas. The process includes an absorption step and a membrane pervaporation step to regenerate the liquid sorbent.

Wijmans, Johannes G; Ng, Alvin; Mairal, Anurag P

2006-11-07T23:59:59.000Z

240

Historical Natural Gas Annual  

U.S. Energy Information Administration (EIA) Indexed Site

8 The Historical Natural Gas Annual contains historical information on supply and disposition of natural gas at the national, regional, and State level as well as prices at...

Note: This page contains sample records for the topic "gas rig counts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Historical Natural Gas Annual  

U.S. Energy Information Administration (EIA) Indexed Site

6 The Historical Natural Gas Annual contains historical information on supply and disposition of natural gas at the national, regional, and State level as well as prices at...

242

Historical Natural Gas Annual  

U.S. Energy Information Administration (EIA) Indexed Site

7 The Historical Natural Gas Annual contains historical information on supply and disposition of natural gas at the national, regional, and State level as well as prices at...

243

Whole-body counting in the Marshall Islands  

SciTech Connect (OSTI)

In 1978 the Marshall Islands Radiological Safety Program was organized to perform radiation measurements and assess radiation doses for the people of the Bikini, Enewetak, Rongelap and Utirik Atolls. One of the major field components of this program is whole- body counting (WBC). WBC is used to monitor the quantity of gamma- emitting radionuclides present in individuals. A primary objective of the program was to establish {sup 137}Cesium body contents among the Enewetak, Rongelap and Utirik populations. {sup 137}Cs was the only gamma-emitting fission radionuclide detected in the 1,967 persons monitored. {sup 137}Cs body burdens tended to increase with age for both sexes, and were higher in males. The average {sup 137}Cs dose Annual Effective Dose for the three populations was as follows: For Enewetak, the dose was 22{+-}4 {mu}Sv. For Utirik, the dose was 33{+-} 3 {mu}Sv. Since 1985 the Rongelap people have been self-exiled to Mejatto. Biological elimination should have reduced their dose to virtually zero, and the measured dose was 2{+-}2 {mu}Sv. If they had remained on Rongelap Island, the calculated dose would have been 99 {mu}Sv, which is about one-third of the background dose. 7 refs., 1 tab. (MHB)

Sun, L.C.; Clinton, J.; Kaplan, E.; Meinhold, C.B.

1991-01-01T23:59:59.000Z

244

A two-stage model for incidence and prevalence in point-level spatial count data  

E-Print Network [OSTI]

A two-stage model for incidence and prevalence in point-level spatial count data Virginia Recta about the underlying data generating process. We utilize a two-stage spatial generalized linear mixed and real data from an ecological field survey. 1 Introduction Spatial count data arise frequently

Haran, Murali

245

THE EFFECT OF RADIATIVE COOLING THE SUNYAEVZELDOVICH CLUSTER COUNTS AND ANGULAR POWER SPECTRA: ANALYTIC TREATMENT  

E-Print Network [OSTI]

, strength of thermal signals is directly proportional thermal energy of confined clusters. Unlike darkTHE EFFECT OF RADIATIVE COOLING THE SUNYAEV­ZELDOVICH CLUSTER COUNTS AND ANGULAR POWER SPECTRA­Zeldovich (SZ) cluster counts and power spectra. It appears that analytic results good agreement with those

Boehringer, Hans

246

THE MITTAGLEFFLER PROCESS AND A SCALING LIMIT FOR THE BLOCK COUNTING PROCESS OF  

E-Print Network [OSTI]

THE MITTAG­LEFFLER PROCESS AND A SCALING LIMIT FOR THE BLOCK COUNTING PROCESS OF THE BOLTHAUSEN, for example an explicit formula for the joint moments of its finite dimensional distributions. The main result states that the block counting process of the Bolthausen­Sznitman n-coalescent, properly scaled

Möhle, Martin

247

COUNTING DESCENTS, RISES, AND LEVELS, WITH PRESCRIBED FIRST ELEMENT, IN WORDS  

E-Print Network [OSTI]

COUNTING DESCENTS, RISES, AND LEVELS, WITH PRESCRIBED FIRST ELEMENT, IN WORDS Sergey Kitaev1 the distribution of descents, levels, and rises according to whether the first letter of the descent, rise 0654060 1 #12;2 COUNTING DESCENTS, RISES, AND LEVELS, WITH PRESCRIBED FIRST ELEMENT, IN WORDS Subsequently

Kitaev, Sergey

248

Bioimaging 4 (1996) 93106. Printed in the UK Fluorescent dot counting in  

E-Print Network [OSTI]

Bioimaging 4 (1996) 93­106. Printed in the UK Fluorescent dot counting in interphase cell nuclei allows the enumeration of chromosomal abnormalities in interphase cell nuclei. This process is called dot counting. To estimate the distribution of chromosomes per cell, a large number of cells have to be analysed

van Vliet, Lucas J.

249

FISH and Chips: Automation of Fluorescent Dot Counting in Interphase Cell Nuclei  

E-Print Network [OSTI]

) in each cell nucleus. This system works with two fluorescent dyes, one for the DNA hybridization dotsFISH and Chips: Automation of Fluorescent Dot Counting in Interphase Cell Nuclei Hans Netten,1 Ian abnormalities in inter- phase cell nuclei. This process is called dot counting. To estimate the distribution

van Vliet, Lucas J.

250

Automated Design of Digital Microfluidic Lab-on-Chip under Pin-Count Constraints  

E-Print Network [OSTI]

Automated Design of Digital Microfluidic Lab-on-Chip under Pin-Count Constraints Tao Xu, USA. E-mail: {tao,krish}@ee.duke.edu ABSTRACT Digital microfluidic biochips, as referred to as lab-referencing, Lab-on-Chip, Microfluidics, Pin-count constraints 1. INTRODUCTION Microfluidics technology has made

Chakrabarty, Krishnendu

251

AACR Cancer Progress Report 2012 Making Research Count for Patients: A New Day  

E-Print Network [OSTI]

AACR Cancer Progress Report 2012 Making Research Count for Patients: A New Day www.cancerprogressreport.org · www.aacr.org #12;AACR Cancer Progress Report 2012 Making Research Count for Patients: A New Day www.cancerprogressreport.org · www.aacr.org Also published as: American Association for Cancer Research. AACR cancer progress report

Sherman, S. Murray

252

AN EXAMINATION OF BICYCLE COUNTS AND SPEEDS ASSOCIATED WITH THE INSTALLATION OF BIKE LANES  

E-Print Network [OSTI]

AN EXAMINATION OF BICYCLE COUNTS AND SPEEDS ASSOCIATED WITH THE INSTALLATION OF BIKE LANES IN ST An Examination of Bicycle Counts and Speeds Associated with the Installation of Bike Lanes in St. Petersburg It is assumed that installation of bicycle facilities will result in an increase in the number of bicyclists

North Carolina at Chapel Hill, University of

253

Fast Counting of Triangles in Large Real Networks: Algorithms and Laws  

E-Print Network [OSTI]

to the vast machin- ery of eigenvalue algorithms and fine-tunings. Eigen- values can be easily computed. In this paper, we provide two algorithms, the Eigen- Triangle for counting the total number of triangles in a graph, and the EigenTriangleLocal algorithm that gives the count of triangles that contain a desired

Megalooikonomou, Vasilis

254

Dark counts of superconducting nanowire single-photon detector under illumination  

E-Print Network [OSTI]

An abnormal increase in the SDE was observed for superconducting nanowire single-photon detectors (SNSPDs) when the bias current (Ib) was close to the switching current (Isw). By introducing the time-correlated single-photon counting technique, we investigated the temporal histogram of the detection counts of an SNSPD under illumination. The temporal information helps us to distinguish photon counts from dark counts in the time domain. In this manner, the dark count rate (DCR) under illumination and the accurate SDE can be determined. The DCR under moderate illumination may be significantly larger than the conventional DCR measured without illumination under a high Ib, which causes the abnormal increase in the SDE. The increased DCR may be explained by the suppression of Isw under illumination.

Chen, Sijing; Zhang, Weijun; Yang, Xiaoyan; Li, Hao; Zhang, Lu; Wang, Zhen; Xie, Xiaoming

2015-01-01T23:59:59.000Z

255

A test device for premixed gas turbine combustion oscillations  

SciTech Connect (OSTI)

This report discusses design and operation of a single-nozzle test combustor for studying lean, premixed combustion oscillations from gas turbine fuel nozzles. It was used to study oscillations from a prototype fuel nozzle that produced oscillations during testing in a commercial engine. Similar, but not identical, oscillations were recorded in the test device. Basic requirements of the device design were that the flame geometry be maintained and acoustic losses be minimized; this was achieved by using a Helmholtz resonator as the combustor geometry. Surprisingly, the combustor oscillated strongly at several frequencies, without modification of the resonator. Brief survey of operating conditions suggests that it may be helpful to characterize oscillating behavior in terms of reference velocity and inlet air temperature with the rig backpressure playing a smaller role. The preliminary results do not guarantee that the single-nozzle test device will reproduce arbitrary oscillations that occur on a complete engine test. Nozzle/nozzle interactions may complicate the response, and oscillations controlled by acoustic velocities transverse to the nozzle axis may not be reproduced in a test device that relies on a bulk Helmholtz mode. Nevertheless, some oscillations can be reproduced, and the single-nozzle test device allows both active and passive control strategies to be tested relatively inexpensively.

Richards, G.A.; Gemmen, R.S.; Yip, M.J.

1996-03-01T23:59:59.000Z

256

Energy conservation, counting statistics, and return to equilibrium  

E-Print Network [OSTI]

We study a microscopic Hamiltonian model describing an N-level quantum system S coupled to an infinitely extended thermal reservoir R. Initially, the system S is in an arbitrary state while the reservoir is in thermal equilibrium at temperature T. Assuming that the coupled system S+R is mixing with respect to the joint thermal equilibrium state, we study the Full Counting Statistics (FCS) of the energy transfers S->R and R->S in the process of return to equilibrium. The first FCS describes the increase of the energy of the system S. It is an atomic probability measure, denoted $P_{S,\\lambda,t}$, concentrated on the set of energy differences $\\sigma(H_S)-\\sigma(H_S)$ ($\\sigma(H_S)$ is the spectrum of the Hamiltonian of S, $t$ is the length of the time interval during which the measurement of the energy transfer is performed, and $\\lambda$ is the strength of the interaction between S and R). The second FCS, $P_{R,\\lambda,t}$, describes the decrease of the energy of the reservoir R and is typically a continuous probability measure whose support is the whole real line. We study the large time limit $t\\rightarrow\\infty$ of these two measures followed by the weak coupling limit $\\lambda\\rightarrow 0$ and prove that the limiting measures coincide. This result strengthens the first law of thermodynamics for open quantum systems. The proofs are based on modular theory of operator algebras and on a representation of $P_{R,\\lambda,t}$ by quantum transfer operators.

Vojkan Jaksic; Jane Panangaden; Annalisa Panati; Claude-Alain Pillet

2014-09-30T23:59:59.000Z

257

Compressed gas manifold  

DOE Patents [OSTI]

A compressed gas storage cell interconnecting manifold including a thermally activated pressure relief device, a manual safety shut-off valve, and a port for connecting the compressed gas storage cells to a motor vehicle power source and to a refueling adapter. The manifold is mechanically and pneumatically connected to a compressed gas storage cell by a bolt including a gas passage therein.

Hildebrand, Richard J. (Edgemere, MD); Wozniak, John J. (Columbia, MD)

2001-01-01T23:59:59.000Z

258

OIL & GAS INSTITUTE Introduction  

E-Print Network [OSTI]

OIL & GAS INSTITUTE CONTENTS Introduction Asset Integrity Underpinning Capabilities 2 4 4 6 8 9 10 COMPETITIVENESS UNIVERSITY of STRATHCLYDE OIL & GAS INSTITUTE OIL & GAS EXPERTISE AND PARTNERSHIPS #12;1 The launch of the Strathclyde Oil & Gas Institute represents an important step forward for the University

Mottram, Nigel

259

Noble gas magnetic resonator  

DOE Patents [OSTI]

Precise measurements of a precessional rate of noble gas in a magnetic field is obtained by constraining the time averaged direction of the spins of a stimulating alkali gas to lie in a plane transverse to the magnetic field. In this way, the magnetic field of the alkali gas does not provide a net contribution to the precessional rate of the noble gas.

Walker, Thad Gilbert; Lancor, Brian Robert; Wyllie, Robert

2014-04-15T23:59:59.000Z

260

Transportation and Greenhouse Gas Mitigation  

E-Print Network [OSTI]

fuels (eg diesel, compressed natural gas). Electricity (infossil fuels, such as compressed natural gas and liquefied

Lutsey, Nicholas P.; Sperling, Dan

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "gas rig counts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Natural gas monthly  

SciTech Connect (OSTI)

The Natural Gas Monthly highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. From time to time, the Natural Gas Monthly features articles designed to assist readers in using and interpreting natural gas information.

NONE

1998-01-01T23:59:59.000Z

262

Development of gas turbine combustor fed with bio-fuel oil  

SciTech Connect (OSTI)

Considering the increasing interest in the utilization of biofuels derived from biomass pyrolysis, ENEL/CRT carried out some experimental investigations on feasibility of biofuels utilization in the electricity production systems. The paper considers the experimental activity for the development and the design optimization of a gas turbine combustor suitable to be fed with biofuel oil, on the basis of the pressurized combustion performance obtained in a small gas turbine combustor fed with bio-fuel oil and ethanol/bio-fuel oil mixtures. Combustion tests were performed using the combustion chamber of a 40 kWe gas turbine. A small pressurized rig has been constructed including a nozzle for pressurization and a heat recovering combustion air preheating system, together with a proper injection system consisting of two dual fuel atomizers. Compressed air allowed a good spray quality and a satisfactory flame instability, without the need of a pilot frame, also when firing crude bio-fuel only. A parametric investigation on the combustion performance has been performed in order to evaluate the effect of fuel properties, operating conditions and injection system geometry, especially as regards CO and NO{sub x} emissions and smoke index.

Ardy, P.L.; Barbucci, P.; Benelli, G. [ENEL SpA R& D Dept., Pisa (Italy)] [and others

1995-11-01T23:59:59.000Z

263

A model independent approach towards resource count and precision limits in a general measurement  

E-Print Network [OSTI]

A formulation towards quantifying resource count used in a measurement, that is independent of the model of the measurement dynamics(Quantum/Classical), is considered. For any general measurement with $(M+1)$ discrete outcomes, it is found that there is a unique probability distribution that minimizes the measurement error, with the error scaling as $1/M$. For a measurement with a finite resource$(R)$, this absolute bound implies the resource count to be equal to the possible outcomes i.e. $R=M$. This formulation therefore provides a model independent route towards estimating resource count used in any general measurement scheme.

H. M. Bharath; Saikat Ghosh

2014-06-12T23:59:59.000Z

264

Cost of Gas Adjustment for Gas Utilities (Maine)  

Broader source: Energy.gov [DOE]

This rule, applicable to gas utilities, establishes rules for calculation of gas cost adjustments, procedures to be followed in establishing gas cost adjustments and refunds, and describes reports...

265

Ceramic stationary gas turbine development program -- Fifth annual summary  

SciTech Connect (OSTI)

A program is being performed under the sponsorship of the US Department of Energy, Office of Industrial Technologies, to improve the performance of stationary gas turbines in cogeneration through the selective replacement of metallic hot section components with ceramic parts. The program focuses on design, fabrication, and testing of ceramic components, generating a materials properties data base, and applying life prediction and nondestructive evaluation (NDE). The development program is being performed by a team led by Solar Turbines Incorporated, and which includes suppliers of ceramic components, US research laboratories, and an industrial cogeneration end user. The Solar Centaur 50S engine was selected for the development program. The program goals included an increase in the turbine rotor inlet temperature (TRIT) from 1,010 C (1,850 F) to 1,121 C (2,050 F), accompanied by increases in thermal efficiency and output power. The performance improvements are attributable to the increase in TRIT and the reduction in cooling air requirements for the ceramic parts. The ceramic liners are also expected to lower the emissions of NOx and CO. Under the program uncooled ceramic blades and nozzles have been inserted for currently cooled metal components in the first stage of the gas producer turbine. The louvre-cooled metal combustor liners have been replaced with uncooled continuous-fiber reinforced ceramic composite (CFCC) liners. Modifications have been made to the engine hot section to accommodate the ceramic parts. To date, all first generation designs have been completed. Ceramic components have been fabricated, and are being tested in rigs and in the Centaur 50S engine. Field testing at an industrial co-generation site was started in May, 1997. This paper will provide an update of the development work and details of engine testing of ceramic components under the program.

Price, J.R.; Jimenez, O.; Faulder, L.; Edwards, B.; Parthasarathy, V.

1999-10-01T23:59:59.000Z

266

Enhanced membrane gas separations  

SciTech Connect (OSTI)

An improved membrane gas separation process is described comprising: (a) passing a feed gas stream to the non-permeate side of a membrane system adapted for the passage of purge gas on the permeate side thereof, and for the passage of the feed gas stream in a counter current flow pattern relative to the flow of purge gas on the permeate side thereof, said membrane system being capable of selectively permeating a fast permeating component from said feed gas, at a feed gas pressure at or above atmospheric pressure; (b) passing purge gas to the permeate side of the membrane system in counter current flow to the flow of said feed gas stream in order to facilitate carrying away of said fast permeating component from the surface of the membrane and maintaining the driving force for removal of the fast permeating component through the membrane from the feed gas stream, said permeate side of the membrane being maintained at a subatmospheric pressure within the range of from about 0.1 to about 5 psia by vacuum pump means; (c) recovering a product gas stream from the non-permeate side of the membrane; and (d) discharging purge gas and the fast permeating component that has permeated the membrane from the permeate side of the membrane, whereby the vacuum conditions maintained on the permeate side of the membrane by said vacuum pump means enhance the efficiency of the gas separation operation, thereby reducing the overall energy requirements thereof.

Prasad, R.

1993-07-13T23:59:59.000Z

267

Technical Bulletin A Guide to Absolute Counting Using the BD Accuri C6 Flow Cytometer  

E-Print Network [OSTI]

Contents 1 Introduction 2 Preventive maintenance 2 Performance validation 3 Sample preparation 5 Counting Preventive maintenance As with any laboratory instrument, optimal performance requires proper system maintenance. The following table shows the suggested preventive maintenance routine. For detailed procedures

268

Analytical Performance of Accelerator Mass Spectrometry and Liquid Scintillation Counting for  

E-Print Network [OSTI]

Analytical Performance of Accelerator Mass Spectrometry and Liquid Scintillation Counting for Accelerator Mass Spectrometry, Lawrence Livermore National Laboratory, 7000 East Avenue, Livermore, California of California, San Francisco, California 94143 Accelerator mass spectrometry (AMS) has been applied

Hammock, Bruce D.

269

Packaging and qualification of single photon counting avalanche photodiode focal plane arrays  

E-Print Network [OSTI]

Avalanche Photodiode (APD) photon counting arrays are finding an increasing role in defense applications in laser radar and optical communications. As these system concepts mature, the need for reliable screening, test, ...

Verghese, Simon

270

Measurement of the Neutron Lifetime by Counting Trapped Protons in a Cold Neutron Beam  

E-Print Network [OSTI]

A measurement of the neutron lifetime $\\tau_{n}$ performed by the absolute counting of in-beam neutrons and their decay protons has been completed. Protons confined in a quasi-Penning trap were accelerated onto a silicon detector held at a high potential and counted with nearly unit efficiency. The neutrons were counted by a device with an efficiency inversely proportional to neutron velocity, which cancels the dwell time of the neutron beam in the trap. The result is $\\tau_{n} = (886.6\\pm1.2{\\rm [stat]}\\pm3.2{\\rm [sys]})$ s, which is the most precise measurement of the lifetime using an in-beam method. The systematic uncertainty is dominated by neutron counting, in particular the mass of the deposit and the $^{6}$Li({\\it{n,t}}) cross section. The measurement technique and apparatus, data analysis, and investigation of systematic uncertainties are discussed in detail.

J. S. Nico; M. S. Dewey; D. M. Gilliam; F. E. Wietfeldt; X. Fei; W. M. Snow; G. L. Greene; J. Pauwels; R. Eykens; A. Lamberty; J. Van Gestel; R. D. Scott

2004-11-19T23:59:59.000Z

271

Patterns of Ethnic, Linguistic, and Geographic Heterogeneity of Palmar Interdigital Ridge Counts in the Indian Subcontinent  

E-Print Network [OSTI]

Published data on palmar interdigital ridge counts (a–b, b–c, and c–d) among 57 populations from the Indian subcontinent were analyzed with reference to ethnic, socioeconomic, linguistic, and geographic affiliations of the ...

Reddy, B. Mohan; Demarchi, Dario A.; Bharati, S.; Kumar, Vikrant; Crawford, Michael H.

2004-01-01T23:59:59.000Z

272

Note: Operation of gamma-ray microcalorimeters at elevated count rates using filters with constraints  

SciTech Connect (OSTI)

Microcalorimeter sensors operated near 0.1 K can measure the energy of individual x- and gamma-ray photons with significantly more precision than conventional semiconductor technologies. Both microcalorimeter arrays and higher per pixel count rates are desirable to increase the total throughput of spectrometers based on these devices. The millisecond recovery time of gamma-ray microcalorimeters and the resulting pulse pileup are significant obstacles to high per pixel count rates. Here, we demonstrate operation of a microcalorimeter detector at elevated count rates by use of convolution filters designed to be orthogonal to the exponential tail of a preceding pulse. These filters allow operation at 50% higher count rates than conventional filters while largely preserving sensor energy resolution.

Alpert, B. K.; Horansky, R. D.; Bennett, D. A.; Doriese, W. B.; Fowler, J. W.; Ullom, J. N. [National Institute of Standards and Technology, Boulder, Colorado 80305 (United States); Hoover, A. S.; Rabin, M. W. [Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States)

2013-05-15T23:59:59.000Z

273

Effect of obliteration on crater-count chronologies for Martian surfaces Matthew R. Smith,1  

E-Print Network [OSTI]

Effect of obliteration on crater-count chronologies for Martian surfaces Matthew R. Smith,1 Alan R as evidence for young and geologically significant surface activity. Citation: Smith, M. R., A. R. Gillespie

Montgomery, David R.

274

Natural Gas & Local Governments  

E-Print Network [OSTI]

-trailers New business ventures Frac services Water hauling Brine water remediation Pipeline Group #12;2. Sublette County, Wyoming Largest gas-producing county in Wyoming (44% of states gas

Boyer, Elizabeth W.

275

Microminiature gas chromatograph  

DOE Patents [OSTI]

A microminiature gas chromatograph (.mu.GC) comprising a least one silicon wafer, a gas injector, a column, and a detector. The gas injector has a normally closed valve for introducing a mobile phase including a sample gas in a carrier gas. The valve is fully disposed in the silicon wafer(s). The column is a microcapillary in silicon crystal with a stationary phase and is mechanically connected to receive the mobile phase from the gas injector for the molecular separation of compounds in the sample gas. The detector is mechanically connected to the column for the analysis of the separated compounds of sample gas with electronic means, e.g., ion cell, field emitter and PIN diode.

Yu, Conrad M. (Antioch, CA)

1996-01-01T23:59:59.000Z

276

Microminiature gas chromatograph  

DOE Patents [OSTI]

A microminiature gas chromatograph ({mu}GC) comprising a least one silicon wafer, a gas injector, a column, and a detector. The gas injector has a normally closed valve for introducing a mobile phase including a sample gas in a carrier gas. The valve is fully disposed in the silicon wafer(s). The column is a microcapillary in silicon crystal with a stationary phase and is mechanically connected to receive the mobile phase from the gas injector for the molecular separation of compounds in the sample gas. The detector is mechanically connected to the column for the analysis of the separated compounds of sample gas with electronic means, e.g., ion cell, field emitter and PIN diode. 7 figs.

Yu, C.M.

1996-12-10T23:59:59.000Z

277

Recirculating rotary gas compressor  

DOE Patents [OSTI]

A positive displacement, recirculating Roots-type rotary gas compressor is described which operates on the basis of flow work compression. The compressor includes a pair of large diameter recirculation conduits which return compressed discharge gas to the compressor housing, where it is mixed with low pressure inlet gas, thereby minimizing adiabatic heating of the gas. The compressor includes a pair of involutely lobed impellers and an associated port configuration which together result in uninterrupted flow of recirculation gas. The large diameter recirculation conduits equalize gas flow velocities within the compressor and minimize gas flow losses. The compressor is particularly suited to applications requiring sustained operation at higher gas compression ratios than have previously been feasible with rotary pumps, and is particularly applicable to refrigeration or other applications requiring condensation of a vapor. 12 figs.

Weinbrecht, J.F.

1992-02-25T23:59:59.000Z

278

Recirculating rotary gas compressor  

DOE Patents [OSTI]

A positive displacement, recirculating Roots-type rotary gas compressor which operates on the basis of flow work compression. The compressor includes a pair of large diameter recirculation conduits (24 and 26) which return compressed discharge gas to the compressor housing (14), where it is mixed with low pressure inlet gas, thereby minimizing adiabatic heating of the gas. The compressor includes a pair of involutely lobed impellers (10 and 12) and an associated port configuration which together result in uninterrupted flow of recirculation gas. The large diameter recirculation conduits equalize gas flow velocities within the compressor and minimize gas flow losses. The compressor is particularly suited to applications requiring sustained operation at higher gas compression ratios than have previously been feasible with rotary pumps, and is particularly applicable to refrigeration or other applications requiring condensation of a vapor.

Weinbrecht, John F. (601 Oakwood Loop, NE., Albuquerque, NM 87123)

1992-01-01T23:59:59.000Z

279

Oil and Gas Exploration  

E-Print Network [OSTI]

Metals Industrial Minerals Oil and Gas Geothermal Exploration Development Mining Processing Nevada, oil and gas, and geothermal activities and accomplishments in Nevada: production statistics, exploration and development including drilling for petroleum and geothermal resources, discoveries of ore

Tingley, Joseph V.

280

Gas and Oil (Maryland)  

Broader source: Energy.gov [DOE]

The Department of the Environment has the authority to enact regulations pertaining to oil and gas production, but it cannot prorate or limit the output of any gas or oil well. A permit from the...

Note: This page contains sample records for the topic "gas rig counts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Natural gas annual 1996  

SciTech Connect (OSTI)

This document provides information on the supply and disposition of natural gas to a wide audience. The 1996 data are presented in a sequence that follows natural gas from it`s production to it`s end use.

NONE

1997-09-01T23:59:59.000Z

282

Purchased Gas Adjustment Rules (Tennessee)  

Broader source: Energy.gov [DOE]

The Purchased Gas Adjustment Rules are implemented by the Tennessee Regulatory Authority (Authority). Purchased Gas Adjustment (PGA) Rules are intended to permit the company/LDC (local gas...

283

COMPUTATIONAL OPTIMIZATION OF GAS COMPRESSOR ...  

E-Print Network [OSTI]

Feb 26, 2015 ... When considering cost-optimal operation of gas transport net- works ..... The four most frequently used drive types are gas turbines, gas driven.

2015-02-26T23:59:59.000Z

284

Residual gas analysis device  

DOE Patents [OSTI]

A system is provided for testing the hermeticity of a package, such as a microelectromechanical systems package containing a sealed gas volume, with a sampling device that has the capability to isolate the package and breach the gas seal connected to a pulse valve that can controllably transmit small volumes down to 2 nanoliters to a gas chamber for analysis using gas chromatography/mass spectroscopy diagnostics.

Thornberg, Steven M. (Peralta, NM)

2012-07-31T23:59:59.000Z

285

Natural gas annual 1994  

SciTech Connect (OSTI)

The Natural Gas Annual provides information on the supply and disposition of natural gas to a wide audience including industry, consumers, Federal and State agencies, and educational institutions. The 1994 data are presented in a sequence that follows natural gas (including supplemental supplies) from its production to its end use. This is followed by tables summarizing natural gas supply and disposition from 1990 to 1994 for each Census Division and each State. Annual historical data are shown at the national level.

NONE

1995-11-17T23:59:59.000Z

286

Natural gas annual 1995  

SciTech Connect (OSTI)

The Natural Gas Annual provides information on the supply and disposition of natural gas to a wide audience including industry, consumers, Federal and State agencies, and educational institutions. The 1995 data are presented in a sequence that follows natural gas (including supplemental supplies) from its production to its end use. This is followed by tables summarizing natural gas supply and disposition from 1991 to 1995 for each Census Division and each State. Annual historical data are shown at the national level.

NONE

1996-11-01T23:59:59.000Z

287

Gas Cylinders: Proper Management  

E-Print Network [OSTI]

Compressed Gas Cylinders: Proper Management And Use Published by the Office of Environment, Health;1 Introduction University of California, Berkeley (UC Berkeley) departments that use compressed gas cylinders (MSDS) and your department's Job Safety Analyses (JSAs). Talk to your gas supplier about hands

Boyer, Elizabeth W.

288

Gas Chromatography -Mass Spectrometry  

E-Print Network [OSTI]

GCMS - 1 Gas Chromatography - Mass Spectrometry GC-MS ANALYSIS OF ETHANOL AND BENZENE IN GASOLINE Last updated: June 17, 2014 #12;GCMS - 2 Gas Chromatography - Mass Spectrometry GC-MS ANALYSIS). The goal of this experiment is to separate the components in a sample of gasoline using Gas Chromatography

Nizkorodov, Sergey

289

Static gas expansion cooler  

DOE Patents [OSTI]

Disclosed is a cooler for television cameras and other temperature sensitive equipment. The cooler uses compressed gas ehich is accelerated to a high velocity by passing it through flow passageways having nozzle portions which expand the gas. This acceleration and expansion causes the gas to undergo a decrease in temperature thereby cooling the cooler body and adjacent temperature sensitive equipment.

Guzek, J.C.; Lujan, R.A.

1984-01-01T23:59:59.000Z

290

Valve for gas centrifuges  

DOE Patents [OSTI]

The invention is pneumatically operated valve assembly for simulatenously (1) closing gas-transfer lines connected to a gas centrifuge or the like and (2) establishing a recycle path between two on the lines so closed. The value assembly is especially designed to be compact, fast-acting, reliable, and comparatively inexpensive. It provides large reductions in capital costs for gas-centrifuge cascades.

Hahs, C.A.; Rurbage, C.H.

1982-03-17T23:59:59.000Z

291

Tracing Noble Gas Radionuclides in the Environment  

E-Print Network [OSTI]

Trace analysis of radionuclides is an essential and versatile tool in modern science and technology. Due to their ideal geophysical and geochemical properties, long-lived noble gas radionuclides, in particular, 39Ar (t1/2 = 269 yr), 81Kr (t1/2 = 2.3x10^5 yr) and 85Kr (t1/2 = 10.8 yr), have long been recognized to have a wide range of important applications in Earth sciences. In recent years, significant progress has been made in the development of practical analytical methods, and has led to applications of these isotopes in the hydrosphere (tracing the flow of groundwater and ocean water). In this article, we introduce the applications of these isotopes and review three leading analytical methods: Low-Level Counting (LLC), Accelerator Mass Spectrometry (AMS) and Atom Trap Trace Analysis (ATTA).

P. Collon; W. Kutschera; Z. -T. Lu

2004-02-11T23:59:59.000Z

292

Welcome FUPWG- Natural Gas Overview  

Broader source: Energy.gov [DOE]

Presentation—given at the Federal Utility Partnership Working Group (FUPWG) Fall 2008 meeting—provides an overview of natural gas, including emissions, compressed natural gas (CNG) vehicles, and landfill gas supplement for natural gas system.

293

Natural gas leak mapper  

DOE Patents [OSTI]

A system is described that is suitable for use in determining the location of leaks of gases having a background concentration. The system is a point-wise backscatter absorption gas measurement system that measures absorption and distance to each point of an image. The absorption measurement provides an indication of the total amount of a gas of interest, and the distance provides an estimate of the background concentration of gas. The distance is measured from the time-of-flight of laser pulse that is generated along with the absorption measurement light. The measurements are formated into an image of the presence of gas in excess of the background. Alternatively, an image of the scene is superimosed on the image of the gas to aid in locating leaks. By further modeling excess gas as a plume having a known concentration profile, the present system provides an estimate of the maximum concentration of the gas of interest.

Reichardt, Thomas A. (Livermore, CA); Luong, Amy Khai (Dublin, CA); Kulp, Thomas J. (Livermore, CA); Devdas, Sanjay (Albany, CA)

2008-05-20T23:59:59.000Z

294

Flue gas desulfurization  

DOE Patents [OSTI]

A process and apparatus for removing sulfur oxide from combustion gas to form Na.sub.2 SO.sub.4 and for reducing the harmful effects of Na.sub.2 SO.sub.4 on auxiliary heat exchangers in which a sodium compound is injected into the hot combustion gas forming liquid Na.sub.2 SO.sub.4 in a gas-gas reaction and the resultant gas containing Na.sub.2 SO.sub.4 is cooled to below about 1150.degree. K. to form particles of Na.sub.2 SO.sub.4 prior to contact with at least one heat exchanger with the cooling being provided by the recycling of combustion gas from a cooled zone downstream from the introduction of the cooling gas.

Im, Kwan H. (Lisle, IL); Ahluwalia, Rajesh K. (Clarendon Hills, IL)

1985-01-01T23:59:59.000Z

295

EIA Energy Information Administration  

U.S. Energy Information Administration (EIA) Indexed Site

week to end at 28.30 or 4.88 per MMBtu. For the week ended April 27, the Baker Hughes Rotary Rig Count for the number of drilling rigs actively exploring for or developing...

296

EIA Energy Information Administration  

U.S. Energy Information Administration (EIA) Indexed Site

for higher consumer prices in the upcoming winter. Other Market Trends: The Baker Hughes Rotary Rig Count of the number of drilling rigs actively exploring for or developing oil...

297

Gas Hydrate Storage of Natural Gas  

SciTech Connect (OSTI)

Environmental and economic benefits could accrue from a safe, above-ground, natural-gas storage process allowing electric power plants to utilize natural gas for peak load demands; numerous other applications of a gas storage process exist. A laboratory study conducted in 1999 to determine the feasibility of a gas-hydrates storage process looked promising. The subsequent scale-up of the process was designed to preserve important features of the laboratory apparatus: (1) symmetry of hydrate accumulation, (2) favorable surface area to volume ratio, (3) heat exchanger surfaces serving as hydrate adsorption surfaces, (4) refrigeration system to remove heat liberated from bulk hydrate formation, (5) rapid hydrate formation in a non-stirred system, (6) hydrate self-packing, and (7) heat-exchanger/adsorption plates serving dual purposes to add or extract energy for hydrate formation or decomposition. The hydrate formation/storage/decomposition Proof-of-Concept (POC) pressure vessel and supporting equipment were designed, constructed, and tested. This final report details the design of the scaled POC gas-hydrate storage process, some comments on its fabrication and installation, checkout of the equipment, procedures for conducting the experimental tests, and the test results. The design, construction, and installation of the equipment were on budget target, as was the tests that were subsequently conducted. The budget proposed was met. The primary goal of storing 5000-scf of natural gas in the gas hydrates was exceeded in the final test, as 5289-scf of gas storage was achieved in 54.33 hours. After this 54.33-hour period, as pressure in the formation vessel declined, additional gas went into the hydrates until equilibrium pressure/temperature was reached, so that ultimately more than the 5289-scf storage was achieved. The time required to store the 5000-scf (48.1 hours of operating time) was longer than designed. The lower gas hydrate formation rate is attributed to a lower heat transfer rate in the internal heat exchanger than was designed. It is believed that the fins on the heat-exchanger tubes did not make proper contact with the tubes transporting the chilled glycol, and pairs of fins were too close for interior areas of fins to serve as hydrate collection sites. A correction of the fabrication fault in the heat exchanger fin attachments could be easily made to provide faster formation rates. The storage success with the POC process provides valuable information for making the process an economically viable process for safe, aboveground natural-gas storage.

Rudy Rogers; John Etheridge

2006-03-31T23:59:59.000Z

298

An Advisory System For Selecting Drilling Technologies and Methods in Tight Gas Reservoirs  

E-Print Network [OSTI]

). 13 Fig. 6? Rotary drilling process (Bourgoyne et al. 1986). Two main systems are currently used to rotate the drill bit. As of 2007, for onshore drilling, 55% of the drilling rigs are equipped with a rotary table and Kelly- bushing while 45... ................................................................................................ 11 2.2.2. Discussion .................................................................................................. 12 2.3 Fit For Purpose Land Rig ................................................................................. 16 2.4 Slim...

Pilisi, Nicolas

2010-01-16T23:59:59.000Z

299

Cosmic ray neutron background reduction using localized coincidence veto neutron counting  

DOE Patents [OSTI]

This invention relates to both the apparatus and method for increasing the sensitivity of measuring the amount of radioactive material in waste by reducing the interference caused by cosmic ray generated neutrons. The apparatus includes: (a) a plurality of neutron detectors, each of the detectors including means for generating a pulse in response to the detection of a neutron; and (b) means, coupled to each of the neutrons detectors, for counting only some of the pulses from each of the detectors, whether cosmic ray or fission generated. The means for counting includes a means that, after counting one of the pulses, vetos the counting of additional pulses for a prescribed period of time. The prescribed period of time is between 50 and 200 .mu.s. In the preferred embodiment the prescribed period of time is 128 .mu.s. The veto means can be an electronic circuit which includes a leading edge pulse generator which passes a pulse but blocks any subsequent pulse for a period of between 50 and 200 .mu.s. Alternately, the veto means is a software program which includes means for tagging each of the pulses from each of the detectors for both time and position, means for counting one of the pulses from a particular position, and means for rejecting those of the pulses which originate from the particular position and in a time interval on the order of the neutron die-away time in polyethylene or other shield material. The neutron detectors are grouped in pods, preferably at least 10. The apparatus also includes means for vetoing the counting of coincidence pulses from all of the detectors included in each of the pods which are adjacent to the pod which includes the detector which produced the pulse which was counted.

Menlove, Howard O. (Los Alamos, NM); Bourret, Steven C. (Los Alamos, NM); Krick, Merlyn S. (Los Alamos, NM)

2002-01-01T23:59:59.000Z

300

Carbon sequestration in natural gas reservoirs: Enhanced gas recovery and natural gas storage  

E-Print Network [OSTI]

gas reservoirs for carbon sequestration and enhanced gasproduction and carbon sequestration, Society of Petroleumfeasibiilty of carbon sequestration with enhanced gas

Oldenburg, Curtis M.

2003-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "gas rig counts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Flue gas desulfurization  

DOE Patents [OSTI]

The invention involves a combustion process in which combustion gas containing sulfur oxide is directed past a series of heat exchangers to a stack and in which a sodium compound is added to the combustion gas in a temparature zone of above about 1400 K to form Na/sub 2/SO/sub 4/. Preferably, the temperature is above about 1800 K and the sodium compound is present as a vapor to provide a gas-gas reaction to form Na/sub 2/SO/sub 4/ as a liquid. Since liquid Na/sub 2/SO/sub 4/ may cause fouling of heat exchanger surfaces downstream from the combustion zone, the process advantageously includes the step of injecting a cooling gas downstream of the injection of the sodium compound yet upstream of one or more heat exchangers to cool the combustion gas to below about 1150 K and form solid Na/sub 2/SO/sub 4/. The cooling gas is preferably a portion of the combustion gas downstream which may be recycled for cooling. It is further advantageous to utilize an electrostatic precipitator downstream of the heat exchangers to recover the Na/sub 2/SO/sub 4/. It is also advantageous in the process to remove a portion of the combustion gas cleaned in the electrostatic precipitator and recycle that portion upstream to use as the cooling gas. 3 figures.

Im, K.H.; Ahluwalia, R.K.

1984-05-01T23:59:59.000Z

302

Oil and Gas field code master list 1995  

SciTech Connect (OSTI)

This is the fourteenth annual edition of the Energy Information Administration`s (EIA) Oil and Gas Field Code Master List. It reflects data collected through October 1995 and provides standardized field name spellings and codes for all identified oil and/or gas fields in the US. The Field Code Index, a listing of all field names and the States in which they occur, ordered by field code, has been removed from this year`s publications to reduce printing and postage costs. Complete copies (including the Field Code Index) will be available on the EIA CD-ROM and the EIA World-Wide Web Site. Future editions of the complete Master List will be available on CD-ROM and other electronic media. There are 57,400 field records in this year`s Oil and Gas Field Code Master List. As it is maintained by EIA, the Master List includes the following: field records for each State and county in which a field resides; field records for each offshore area block in the Gulf of Mexico in which a field resides; field records for each alias field name (see definition of alias below); and fields crossing State boundaries that may be assigned different names by the respective State naming authorities. Taking into consideration the double-counting of fields under such circumstances, EIA identifies 46,312 distinct fields in the US as of October 1995. This count includes fields that no longer produce oil or gas, and 383 fields used in whole or in part for oil or gas Storage. 11 figs., 6 tabs.

NONE

1995-12-01T23:59:59.000Z

303

Gas shielding apparatus  

DOE Patents [OSTI]

An apparatus for preventing oxidation by uniformly distributing inert shielding gas over the weld area of workpieces such as pipes being welded together. The apparatus comprises a chamber and a gas introduction element. The chamber has an annular top wall, an annular bottom wall, an inner side wall and an outer side wall connecting the top and bottom walls. One side wall is a screen and the other has a portion defining an orifice. The gas introduction element has a portion which encloses the orifice and can be one or more pipes. The gas introduction element is in fluid communication with the chamber and introduces inert shielding gas into the chamber. The inert gas leaves the chamber through the screen side wall and is dispersed evenly over the weld area.

Brandt, D.

1984-06-05T23:59:59.000Z

304

Valve for gas centrifuges  

DOE Patents [OSTI]

The invention is a pneumatically operated valve assembly for simultaneously (1) closing gas-transfer lines connected to a gas centrifuge or the like and (2) establishing a recycle path between two of the lines so closed. The valve assembly is especially designed to be compact, fast-acting, reliable, and comparatively inexpensive. It provides large reductions in capital costs for gas-centrifuge cascades.

Hahs, Charles A. (Oak Ridge, TN); Burbage, Charles H. (Oak Ridge, TN)

1984-01-01T23:59:59.000Z

305

Thermodynamics of Chaplygin gas  

E-Print Network [OSTI]

We clarify thermodynamics of the Chaplygin gas by introducing the integrability condition. All thermal quantities are derived as functions of either volume or temperature. Importantly, we find a new general equation of state, describing the Chaplygin gas completely. We confirm that the Chaplygin gas could show a unified picture of dark matter and energy which cools down through the universe expansion without any critical point (phase transition).

Yun Soo Myung

2011-05-11T23:59:59.000Z

306

Star-formation rates from young-star counts and the structure of the ISM across the NGC346/N66 complex in the SMC  

E-Print Network [OSTI]

The rate at which interstellar gas is converted into stars, and its dependence on environment, is one of the pillars on which our understanding of the visible Universe is build. We present a comparison of the surface density of young stars (Sigma_*) and dust surface density (Sigma_d) across NGC346 (N66) in 115 independent pixels of 6x6 pc^2. We find a correlation between Sigma_* and Sigma_d with a considerable scatter. A power law fit to the data yields a steep relation with an exponent of 2.6+-0.2. We convert Sigma_d to gas surface density (Sigma_g) and Sigma_* to star formation rate (SFR) surface densities (Sigma_SFR), using simple assumptions for the gas-to-dust mass ratio and the duration of star formation. The derived total SFR (4+-1 10^-3 M_sun/yr) is consistent with SFR estimated from the Ha emission integrated over the Ha nebula. On small scales the Sigma_SFR derived using Ha systematically underestimates the count-based Sigma_SFR, by up to a factor of 10. This is due to ionizing photons escaping the ...

Hony, S; Galliano, F; Galametz, M; Cormier, D; Chen, C -H R; Dib, S; Hughes, A; Klessen, R S; Roman-Duval, J; Smith, L; Bernard, J -P; Bot, C; Carlson, L; Gordon, K; Indebetouw, R; Lebouteiller, V; Lee, M -Y; Madden, S C; Meixner, M; Oliveira, J; Rubio, M; Sauvage, M; Wu, R

2015-01-01T23:59:59.000Z

307

Anomalous dimensions determine the power counting -- Wilsonian RG analysis of nuclear EFT --  

E-Print Network [OSTI]

The Legendre flow equation, a version of exact Wilsonian renormalization group (WRG) equation, is employed to consider the power counting issues in Nuclear Effective Field Theory. A WRG approach is an ideal framework because it is nonperturbative and does not require any prescribed power counting rule. The power counting is determined systematically from the scaling dimensions of the operators at the nontrivial fixed point. The phase structure is emphasized and the inverse of the scattering length, which is identified as a relevant coupling, is shown to play a role of the order parameter. The relations to the work done by Birse, McGovern, and Richardson and to the Kaplan-Savage-Wise scheme are explained.

Koji Harada; Hirofumi Kubo

2006-10-24T23:59:59.000Z

308

On power-counting renormalizability of Ho?ava gravity with detailed balance  

E-Print Network [OSTI]

We consider the version of Ho\\v{r}ava gravity where "detailed balance" is consistently implemented, such as to limitate the huge proliferation of couplings in the full theory and to obtain an healthy dynamics at low-energy. Since a superpotential which is third-order in spatial derivatives is not sufficient to guarantee the power-counting renormalizability of the spin-0 graviton, then one needs to go an order beyond in derivatives, building up a superpotential up to fourth-order spatial derivatives. Here, we perturb the action to quadratic order around flat space, and show that power-counting renormalizability of the spin-0 graviton is achieved only by setting to zero a specific coupling of the theory, while the spin-2 graviton is always power-counting renormalizable for any choice of the couplings. This result raises serious doubts about the use of detailed balance.

Daniele Vernieri

2015-02-23T23:59:59.000Z

309

On power-counting renormalizability of Ho\\v{r}ava gravity with detailed balance  

E-Print Network [OSTI]

We consider the version of Ho\\v{r}ava gravity where "detailed balance" is consistently implemented, such as to limitate the huge proliferation of couplings in the full theory and to obtain an healthy dynamics at low-energy. Since a superpotential which is third-order in spatial derivatives is not sufficient to guarantee the power-counting renormalizability of the spin-0 graviton, then one needs to go an order beyond in derivatives, building up a superpotential up to fourth-order spatial derivatives. Here, we perturb the action to quadratic order around flat space, and show that power-counting renormalizability of the spin-0 graviton is achieved only by setting to zero a specific coupling of the theory, while the spin-2 graviton is always power-counting renormalizable for any choice of the couplings. This result raises serious doubts about the use of detailed balance.

Vernieri, Daniele

2015-01-01T23:59:59.000Z

310

Ammonia synthesis gas purification  

SciTech Connect (OSTI)

This patent describes the purification of a reformed gas mixture following water gas shift conversion to produce a purified ammonia synthesis gas stream. The improved processing sequence consisting essentially of: (A) Selectively catalytically oxidizing the residual carbon monoxide content of the gas mixture to carbon dioxide so as to reduce the carbon monoxide content of the gas mixture to less than about 20 ppm, the selective catalytic oxidation being carried out with an excess of air, with the excess oxygen being catalytically reacted with a small amount of hydrogen so that the residual oxygen level is reduced to less than about 3 ppm; (B) removing the bulk of the carbon dioxide content of the gas mixture by liquid absorption; (C) Removing residual amounts of carbon monoxide, carbon dioxide and water by selective adsorption on the fixed beds of a thermal swing adsorption system, a dry, purified ammonia ammonia synthesis gas stream containing less than a total of 10 ppm of carbon monoxide and carbon dioxide being recovered from the thermal swing adsorption system; (D) Passing the resulting dry, purified ammonia synthesis gas stream having a low content of methane to an ammonia production operation without intermediate passage of the ammonia synthesis gas stream to a methanation unit or to a cryogenic unit for removal of carbon monoxide and carbon dioxide therefrom; whereby the efficiency of the overall purification operation and the effective utilization of hydrogen are enhanced.

Fuderer, A.

1986-02-25T23:59:59.000Z

311

Liquefied Natural Gas (Iowa)  

Broader source: Energy.gov [DOE]

This document adopts the standards promulgated by the National Fire Protection Association as rules for the transportation, storage, handling, and use of liquefied natural gas. The NFPA standards...

312

Reversible Acid Gas Capture  

ScienceCinema (OSTI)

Pacific Northwest National Laboratory scientist David Heldebrant demonstrates how a new process called reversible acid gas capture works to pull carbon dioxide out of power plant emissions.

Dave Heldebrant

2012-12-31T23:59:59.000Z

313

Natural Gas Rules (Louisiana)  

Broader source: Energy.gov [DOE]

The Louisiana Department of Natural Resources administers the rules that govern natural gas exploration and extraction in the state. DNR works with the Louisiana Department of Environmental...

314

String Gas Baryogenesis  

E-Print Network [OSTI]

We describe a possible realization of the spontaneous baryogenesis mechanism in the context of extra-dimensional string cosmology and specifically in the string gas scenario.

G. L. Alberghi

2010-02-19T23:59:59.000Z

315

Polyport atmospheric gas sampler  

DOE Patents [OSTI]

An atmospheric gas sampler with a multi-port valve which allows for multi, sequential sampling of air through a plurality of gas sampling tubes mounted in corresponding gas inlet ports. The gas sampler comprises a flow-through housing which defines a sampling chamber and includes a gas outlet port to accommodate a flow of gases through the housing. An apertured sample support plate defining the inlet ports extends across and encloses the sampling chamber and supports gas sampling tubes which depend into the sampling chamber and are secured across each of the inlet ports of the sample support plate in a flow-through relation to the flow of gases through the housing during sampling operations. A normally closed stopper means mounted on the sample support plate and operatively associated with each of the inlet ports blocks the flow of gases through the respective gas sampling tubes. A camming mechanism mounted on the sample support plate is adapted to rotate under and selectively lift open the stopper spring to accommodate a predetermined flow of gas through the respective gas sampling tubes when air is drawn from the housing through the outlet port.

Guggenheim, S. Frederic (Teaneck, NJ)

1995-01-01T23:59:59.000Z

316

,"Colorado Natural Gas Prices"  

U.S. Energy Information Administration (EIA) Indexed Site

Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Colorado Natural Gas Prices",8,"Monthly","112014","1151989" ,"Release Date:","1302015"...

317

Oil and Gas (Indiana)  

Broader source: Energy.gov [DOE]

This division of the Indiana Department of Natural Resources provides information on the regulation of oil and gas exploration, wells and well spacings, drilling, plugging and abandonment, and...

318

Oil and Gas Outlook  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Gas Outlook For Independent Petroleum Association of America November 13, 2014 | Palm Beach, FL By Adam Sieminski, Administrator U.S. Energy Information Administration Recent...

319

Natural gas annual 1997  

SciTech Connect (OSTI)

The Natural Gas Annual provides information on the supply and disposition of natural gas to a wide audience including industry, consumers, Federal and State agencies, and educational institutions. The 1997 data are presented in a sequence that follows natural gas (including supplemental supplies) from its production to its end use. This is followed by tables summarizing natural gas supply and disposition from 1993 to 1997 for each Census Division and each State. Annual historical data are shown at the national level. 27 figs., 109 tabs.

NONE

1998-10-01T23:59:59.000Z

320

Gas venting system  

DOE Patents [OSTI]

A system to vent a moist gas stream is disclosed. The system includes an enclosure and an electrochemical cell disposed within the enclosure, the electrochemical cell productive of the moist gas stream. A first vent is in fluid communication with the electrochemical cell for venting the moist gas stream to an exterior of the enclosure, and a second vent is in fluid communication with an interior of the enclosure and in thermal communication with the first vent for discharging heated air to the exterior of the enclosure. At least a portion of the discharging heated air is for preventing freezing of the moist gas stream within the first vent.

Khan, Amjad; Dreier, Ken Wayne; Moulthrop, Lawrence Clinton; White, Erik James

2010-06-29T23:59:59.000Z

Note: This page contains sample records for the topic "gas rig counts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

ADONIS, high count-rate HP-Ge {gamma} spectrometry algorithm: Irradiated fuel assembly measurement  

SciTech Connect (OSTI)

ADONIS is a digital system for gamma-ray spectrometry, developed by CEA. This system achieves high count-rate gamma-ray spectrometry with correct dynamic dead-time correction, up to, at least, more than an incoming count rate of 3.10{sup 6} events per second. An application of such a system at AREVA NC's La Hague plant is the irradiated fuel scanning facility before reprocessing. The ADONIS system is presented, then the measurement set-up and, last, the measurement results with reference measurements. (authors)

Pin, P. [AREVA NC La Hague - Nuclear Measurement Team, 50444 Beaumont-Hague Cedex (France); Barat, E.; Dautremer, T.; Montagu, T. [CEA - Saclay, LIST, Electronics and Signal Processing Laboratory, 91191 Gif sur Yvette (France); Normand, S. [CEA - Saclay, LIST, Sensors and Electronic Architectures Laboratory, 91191 Gif sur Yvette (France)

2011-07-01T23:59:59.000Z

322

Photon counting for quantum key distribution with Peltier cooled InGaAs/InP APD's  

E-Print Network [OSTI]

The performance of three types of InGaAs/InP avalanche photodiodes is investigated for photon counting at 1550 nm in the temperature range of thermoelectric cooling. The best one yields a dark count probability of $% 2.8\\cdot 10^{-5}$ per gate (2.4 ns) at a detection efficiency of 10% and a temperature of -60C. The afterpulse probability and the timing jitter are also studied. The results obtained are compared with those of other papers and applied to the simulation of a quantum key distribution system. An error rate of 10% would be obtained after 54 kilometers.

Damien Stucki; Grégoire Ribordy; André Stefanov; Hugo Zbinden; John G. Rarity; Tom Wall

2001-06-01T23:59:59.000Z

323

Photon counting for quantum key distribution with Peltier cooled InGaAs/InP APD's  

E-Print Network [OSTI]

The performance of three types of InGaAs/InP avalanche photodiodes is investigated for photon counting at 1550 nm in the temperature range of thermoelectric cooling. The best one yields a dark count probability of $% 2.8\\cdot 10^{-5}$ per gate (2.4 ns) at a detection efficiency of 10% and a temperature of -60C. The afterpulse probability and the timing jitter are also studied. The results obtained are compared with those of other papers and applied to the simulation of a quantum key distribution system. An error rate of 10% would be obtained after 54 kilometers.

Stucki, D; Stefanov, A; Zbinden, H; Rarity, J G; Wall, T; Stucki, Damien; Ribordy, Gr\\'{e}goire; Stefanov, Andr\\'{e}; Zbinden, Hugo; Rarity, John G.; Wall, Tom

2001-01-01T23:59:59.000Z

324

47 Natural Gas Market Trends NATURAL GAS MARKET TRENDS  

E-Print Network [OSTI]

47 Natural Gas Market Trends Chapter 5 NATURAL GAS MARKET TRENDS INTRODUCTION Natural gas discusses current natural gas market conditions in California and the rest of North America, followed on the outlook for demand, supply, and price of natural gas for the forecasted 20-year horizon. It also addresses

325

Fission gas detection system  

DOE Patents [OSTI]

A device for collecting fission gas released by a failed fuel rod which device uses a filter to pass coolant but which filter blocks fission gas bubbles which cannot pass through the filter due to the surface tension of the bubble.

Colburn, Richard P. (Pasco, WA)

1985-01-01T23:59:59.000Z

326

Illinois Natural Gas Summary  

U.S. Energy Information Administration (EIA) Indexed Site

Withdrawals NA NA NA NA NA NA 1991-2014 From Gas Wells NA NA NA NA NA NA 1991-2014 From Oil Wells NA NA NA NA NA NA 1991-2014 From Shale Gas Wells NA NA NA NA NA NA 2007-2014...

327

Montana Natural Gas Summary  

U.S. Energy Information Administration (EIA) Indexed Site

Withdrawals NA NA NA NA NA NA 1991-2014 From Gas Wells NA NA NA NA NA NA 1991-2014 From Oil Wells NA NA NA NA NA NA 1991-2014 From Shale Gas Wells NA NA NA NA NA NA 2007-2014...

328

Gas Kick Mechanistic Model  

E-Print Network [OSTI]

-gain and temperature profile in the annulus. This research focuses on these changes in these parameters to be able to detect the occurrence of gas kick and the circulation of the gas kick out from the well. In this thesis, we have developed a model that incorporates...

Zubairy, Raheel

2014-04-18T23:59:59.000Z

329

Gas pump with movable gas pumping panels  

DOE Patents [OSTI]

Apparatus for pumping gas continuously a plurality of articulated panels of getter material, each of which absorbs gases on one side while another of its sides is simultaneously reactivated in a zone isolated by the panels themselves from a working space being pumped.

Osher, John E. (Alamo, CA)

1984-01-01T23:59:59.000Z

330

Challenges, uncertainties and issues facing gas production from gas hydrate deposits  

E-Print Network [OSTI]

of Gas Price ($/Mscf) for Offshore Gas Hydrate StudyEvaluation of deepwater gas-hydrate systems. The Leadingfor Gas Production from Gas Hydrates Reservoirs. J. Canadian

Moridis, G.J.

2011-01-01T23:59:59.000Z

331

Supersonic gas compressor  

DOE Patents [OSTI]

A gas compressor based on the use of a driven rotor having a compression ramp traveling at a local supersonic inlet velocity (based on the combination of inlet gas velocity and tangential speed of the ramp) which compresses inlet gas against a stationary sidewall. In using this method to compress inlet gas, the supersonic compressor efficiently achieves high compression ratios while utilizing a compact, stabilized gasdynamic flow path. Operated at supersonic speeds, the inlet stabilizes an oblique/normal shock system in the gasdyanamic flow path formed between the rim of the rotor, the strakes, and a stationary external housing. Part load efficiency is enhanced by the use of a pre-swirl compressor, and using a bypass stream to bleed a portion of the intermediate pressure gas after passing through the pre-swirl compressor back to the inlet of the pre-swirl compressor. Inlet guide vanes to the compression ramp enhance overall efficiency.

Lawlor, Shawn P. (Bellevue, WA); Novaresi, Mark A. (San Diego, CA); Cornelius, Charles C. (Kirkland, WA)

2007-11-13T23:59:59.000Z

332

Cryogenic treatment of gas  

DOE Patents [OSTI]

Systems and methods of treating a gas stream are described. A method of treating a gas stream includes cryogenically separating a first gas stream to form a second gas stream and a third stream. The third stream is cryogenically contacted with a carbon dioxide stream to form a fourth and fifth stream. A majority of the second gas stream includes methane and/or molecular hydrogen. A majority of the third stream includes one or more carbon oxides, hydrocarbons having a carbon number of at least 2, one or more sulfur compounds, or mixtures thereof. A majority of the fourth stream includes one or more of the carbon oxides and hydrocarbons having a carbon number of at least 2. A majority of the fifth stream includes hydrocarbons having a carbon number of at least 3 and one or more of the sulfur compounds.

Bravo, Jose Luis (Houston, TX); Harvey, III, Albert Destrehan (Kingwood, TX); Vinegar, Harold J. (Bellaire, TX)

2012-04-03T23:59:59.000Z

333

Underground Storage of Natural Gas and Liquefied Petroleum Gas (Nebraska)  

Broader source: Energy.gov [DOE]

This statute declares underground storage of natural gas and liquefied petroleum gas to be in the public interest if it promotes the conservation of natural gas and permits the accumulation of...

334

Shale gas production: potential versus actual greenhouse gas emissions  

E-Print Network [OSTI]

Estimates of greenhouse gas (GHG) emissions from shale gas production and use are controversial. Here we assess the level of GHG emissions from shale gas well hydraulic fracturing operations in the United States during ...

O’Sullivan, Francis Martin

335

Peoples Gas and North Shore Gas- Bonus Rebate Program (Illinois)  

Broader source: Energy.gov [DOE]

The Peoples Gas and North Shore Gas Natural Gas Savings Programs are offering the following bonus rebates (in addition to the joint utilities bonus rebate). For both offers below, installation must...

336

Intermountain Gas Company (IGC)- Gas Heating Rebate Program  

Broader source: Energy.gov [DOE]

The Intermountain Gas Company's (IGC) Gas Heating Rebate Program offers customers a $200 per unit rebate when they convert to a high efficiency natural gas furnace that replaces a heating system...

337

EIA - Natural Gas Pipeline Network - Natural Gas Supply Basins...  

Gasoline and Diesel Fuel Update (EIA)

with selected updates U.S. Natural Gas Supply Basins Relative to Major Natural Gas Pipeline Transportation Corridors, 2008 U.S. Natural Gas Transporation Corridors out of Major...

338

Gas Storage Technology Consortium  

SciTech Connect (OSTI)

Gas storage is a critical element in the natural gas industry. Producers, transmission and distribution companies, marketers, and end users all benefit directly from the load balancing function of storage. The unbundling process has fundamentally changed the way storage is used and valued. As an unbundled service, the value of storage is being recovered at rates that reflect its value. Moreover, the marketplace has differentiated between various types of storage services, and has increasingly rewarded flexibility, safety, and reliability. The size of the natural gas market has increased and is projected to continue to increase towards 30 trillion cubic feet (TCF) over the next 10 to 15 years. Much of this increase is projected to come from electric generation, particularly peaking units. Gas storage, particularly the flexible services that are most suited to electric loads, is critical in meeting the needs of these new markets. In order to address the gas storage needs of the natural gas industry, an industry driven consortium was created--the Gas Storage Technology Consortium (GSTC). The objective of the GSTC is to provide a means to accomplish industry-driven research and development designed to enhance operational flexibility and deliverability of the Nation's gas storage system, and provide a cost effective, safe, and reliable supply of natural gas to meet domestic demand. This report addresses the activities for the quarterly period of April 1, 2005 through June 30, 2005. During this time period efforts were directed toward (1) GSTC administration changes, (2) participating in the American Gas Association Operations Conference and Biennial Exhibition, (3) issuing a Request for Proposals (RFP) for proposal solicitation for funding, and (4) organizing the proposal selection meeting.

Joel Morrison

2005-09-14T23:59:59.000Z

339

14 MHz rate photon counting with room temperature InGaAs/InP avalanche photodiodes  

E-Print Network [OSTI]

14 MHz rate photon counting with room temperature InGaAs/InP avalanche photodiodes PAUL L. VOSS based on InGaAs/InP avalanche photodiodes for use at 1.55 mm wavelength. Operation at room temperature at the above wavelengths for conventional high light-level measurements with PIN or ava- lanche photodiodes

Köprülü, Kahraman Güçlü

340

Calibration of the Accuscan II In Vivo System for Whole Body Counting  

SciTech Connect (OSTI)

This report describes the April 2011 calibration of the Accuscan II HpGe In Vivo system for whole body counting. The source used for the calibration was a NIST traceable BOMAB manufactured by DOE as INL2006 BOMAB containing Eu-154, Eu-155, Eu-152, Sb-125 and Y-88 with energies from 27 keV to 1836 keV with a reference date of 11/29/2006. The actual usable energy range was 86.5 keV to 1597 keV on 4/21/2011. The BOMAB was constructed inside the Accuscan II counting 'tub' in the order of legs, thighs, abdomen, thorax/arms, neck, and head. Each piece was taped to the backwall of the counter. The arms were taped to the thorax. The phantom was constructed between the v-ridges on the backwall of the Accuscan II counter. The energy and efficiency calibrations were performed using the INL2006 BOMAB. The calibrations were performed with the detectors in the scanning mode. This report includes an overview introduction and records for the energy/FWHM and efficiency calibration including performance verification and validation counting. The Accuscan II system was successfully calibrated for whole body counting and verified in accordance with ANSI/HPS N13.30-1996 criteria.

Orval R. Perry; David L. Georgeson

2011-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "gas rig counts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Calibration of the Accuscan II IN Vivo System for High Energy Lung Counting  

SciTech Connect (OSTI)

This report describes the April 2011 calibration of the Accuscan II HpGe In Vivo system for high energy lung counting. The source used for the calibration was a NIST traceable lung set manufactured at the University of Cincinnati UCLL43AMEU & UCSL43AMEU containing Am-241 and Eu-152 with energies from 26 keV to 1408 keV. The lung set was used in conjunction with a Realistic Torso phantom. The phantom was placed on the RMC II counting table (with pins removed) between the v-ridges on the backwall of the Accuscan II counter. The top of the detector housing was positioned perpendicular to the junction of the phantom clavicle with the sternum. This position places the approximate center line of the detector housing with the center of the lungs. The energy and efficiency calibrations were performed using a Realistic Torso phantom (Appendix I) and the University of Cincinnati lung set. This report includes an overview introduction and records for the energy/FWHM and efficiency calibration including performance verification and validation counting. The Accuscan II system was successfully calibrated for high energy lung counting and verified in accordance with ANSI/HPS N13.30-1996 criteria.

Ovard R. Perry; David L. Georgeson

2011-07-01T23:59:59.000Z

342

Trends in Texas youth livestock exhibition and County Extension agent perceptions and adoption of quality counts  

E-Print Network [OSTI]

the comparison, market livestock projects have increased by 7.06% since 2000. Beef cattle and goats have increased, while sheep and swine have slightly decreased. Roughly a third of Texas counties will be utilizing the Quality Counts curriculum during the year...

Coufal, Dustin Wayne

2009-05-15T23:59:59.000Z

343

SMART OCEANS BC Media Backgrounder From sensors to decisions when seconds count  

E-Print Network [OSTI]

SMART OCEANS BC ­ Media Backgrounder From sensors to decisions ­ when seconds count Introduction Oceans 2.0 and high speed, real-time analytics to monitor the #12;hundreds of sensors. Funding for Smart to develop fast event detection and enable a mobile Oceans 2.0 for use in geographically remote sensor

Pedersen, Tom

344

ASSESSMENT OF POTENTIAL BIAS WITH SNOWSHOE HARE FECAL PELLET-PLOT COUNTS  

E-Print Network [OSTI]

385 ASSESSMENT OF POTENTIAL BIAS WITH SNOWSHOE HARE FECAL PELLET-PLOT COUNTS DENNIS MURRAY, 1 National Forest, Coeur d'Alene, ID 83815, USA Abstract: The fecal pellet-plot method has been used biases associated with the technique have not been addressed ade- quately. We studied hare pellet

345

PELLET COUNT INDICES COMPARED TO MARKRECAPTURE ESTIMATES FOR EVALUATING SNOWSHOE HARE DENSITY  

E-Print Network [OSTI]

PELLET COUNT INDICES COMPARED TO MARK­RECAPTURE ESTIMATES FOR EVALUATING SNOWSHOE HARE DENSITY L in the contiguous United States. Efforts to evalu- ate hare densities using pellets have traditionally been based there was concordance between pellet-based predictions and mark­recapture density estimates of hares. We developed local

346

Estimating low-density snowshoe hare populations using fecal pellet counts  

E-Print Network [OSTI]

Estimating low-density snowshoe hare populations using fecal pellet counts Dennis L. Murray, James americanus) populations found at high densities can be estimated using fecal pellet densities on rectangular of fecal pellet plots for estimating hare populations by correlating pellet densities with estimated hare

347

A Study Of Texas Youth Livestock Exhibitors Knowledge Within The Constructs Of The Quality Counts Assessment  

E-Print Network [OSTI]

A Study Of Texas Youth Livestock Exhibitors Knowledge Within The Constructs Of The Quality Counts Assessment. (August 2013) J. D. Ragland, B.S., M. S. Chairman of Advisory Committee: Dr. Steve Fraze. The purpose of this study was to examine...

Ragland, J. Derrick

2013-08-09T23:59:59.000Z

348

The Challenges of Getting To Mars: Launching Curiosity Status check to proceed with terminal count.  

E-Print Network [OSTI]

count. Atlas systems, propulsion. Go! Hydraulics. Go! Pneumatics. Go! LO2. Go! Water. Go! Centaur! Facility. Go! RFFTS. Go! Flight control. Go! Instrumentation. Go! Comm. Go! VCQ. Go! Umbilicals. Go! UCS that we're using, the Atlas 5-541. This is the first flight of a 541 launch vehicle. What we do is we

349

Fractal characterization of fracture networks: An improved box-counting technique  

E-Print Network [OSTI]

Fractal characterization of fracture networks: An improved box-counting technique Ankur Roy,1 fracture networks as fractals and estimating their fractal dimensions (D). If this analysis yields a power and r is the box size, then the network is considered to be fractal. However, researchers are divided

Perfect, Ed

350

How to count efficiently all affine roots of a polynomial system \\Lambda  

E-Print Network [OSTI]

on the lifting of the artificial origins exist and can be derived dynamically, as described in sections 4, 5How to count efficiently all affine roots of a polynomial system \\Lambda Ioannis Z. Emiris y Jan system; how­ ever, it has so far mostly dealt with roots having nonzero coordinates. We shift attention

Verschelde, Jan

351

MA.KETODAY COUNT: A MUTUAL SUPPORT GROUP FOR THE DYING  

E-Print Network [OSTI]

The purpose of· this paper is to discuss the aspects of a local chapter of 1Vlake Today Count. MTCis a mutual support group for persons with terminal illnesses. Organized in 1974, it is part afwhat tome have' called the tlhappy death movement...

Bradfield, Cecil D.; Myers, R. Ann

1980-04-01T23:59:59.000Z

352

Online Speed Scaling Based on Active Job Count to Minimize Flow plus Energy  

E-Print Network [OSTI]

Online Speed Scaling Based on Active Job Count to Minimize Flow plus Energy Tak-Wah Lam Lap-Kei Lee research on online job scheduling has gradually taken speed scaling and energy usage into consideration algorithms that aim at minimizing the total flow time plus energy usage. The results are divided into two

Wong, Prudence W.H.

353

Cosmology Constraints from the Weak Lensing Peak Counts and the Power Spectrum in CFHTLenS  

DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

?Lensing peaks have been proposed as a useful statistic, containing cosmological information from non-Gaussianities that is inaccessible from traditional two-point statistics such as the power spectrum or two-point correlation functions. Here we examine constraints on cosmological parameters from weak lensing peak counts, using the publicly available data from the 154 deg2 CFHTLenS survey. We utilize a new suite of ray-tracing N-body simulations on a grid of 91 cosmological models, covering broad ranges of the three parameters ?m, ?8, and w, and replicating the galaxy sky positions, redshifts, and shape noise in the CFHTLenS observations. We then build an emulator that interpolates the power spectrum and the peak counts to an accuracy of ? 5%, and compute the likelihood in the three-dimensional parameter space (?m, ?8, w) from both observables. We find that constraints from peak counts are comparable to those from the power spectrum, and somewhat tighter when different smoothing scales are combined. Neither observable can constrain w without external data. When the power spectrum and peak counts are combined, the area of the error “banana” in the (?m, ?8) plane reduces by a factor of ? two, compared to using the power spectrum alone. For a flat ? cold dark matter model, combining both statistics, we obtain the constraint ?8(?m/0.27)0.63 = 0.85+0.03-0.03.

Liu, Jia [Department of Astronomy and Astrophysics, Columbia University, New York, NY, (United States); May, Morgan [Physics Department, Brookhaven National Laboratory, Upton, NY, (United States); Petri, Andrea [Department of Physics, Columbia University, New York, NY, (United States); Haiman, Zoltan [Department of Astronomy and Astrophysics, Columbia University, New York, NY, (United States); Institute for Strings, Cosmology, and Astroparticle Physics (ISCAP), Columbia University, New York, (United States); Hui, Lam [Department of Physics, Columbia University, New York, NY, (United States); Institute for Strings, Cosmology, and Astroparticle Physics (ISCAP), Columbia University, New York, (United States); Kratochvil, Jan M. [Astrophysics and Cosmology Research Unit, University of KwaZulu-Natal, Westville, Durban, (South Africa)

2015-03-01T23:59:59.000Z

354

Submitted to the Annals of Applied Statistics ESTIMATING LIMITS FROM POISSON COUNTING DATA  

E-Print Network [OSTI]

. In particle acceler- ator experiments, the counts are indirect measurements of the number of particles background noise, such as ambient particles. In many cases there is also multiplicative noise, caused for example by photon censoring or particle decay, which further complicates the process of estimating

Liu, Chuanhai

355

A Specific Multi-channel Photon-Counting Unit for Air-Pollution Measurement  

E-Print Network [OSTI]

A Specific Multi-channel Photon-Counting Unit for Air-Pollution Measurement Papageorgas P.1.g. confocal microscopy), air pollution optical measurements, laser sounding of the atmosphere for the in situ quantitative monitoring of up to five air pollutants simultaneously and one calibration channel

Athens, University of

356

BIOMEDICAL ENGINEERING YOU CAN COUNT ON OUR BIOMEDICAL ENGINEERING INTERNS FOR ANY PROJECTS  

E-Print Network [OSTI]

BIOMEDICAL ENGINEERING YOU CAN COUNT ON OUR BIOMEDICAL ENGINEERING INTERNS FOR ANY PROJECTS ·Integrationofbiomedicaltechnologiesinhospitalsettings KEY TOOLS MASTERED: > C/C++ > LabVIEW > MATLAB > AutoCAD(BiomedicalEngineeringconcentrationinMechanicalEngineering) > PSPICE(BiomedicalEngineeringconcentrationinMechanicalEngineering) #12;DO YOU REQUIRE A CANDIDATE

Skorobogatiy, Maksim

357

natural gas+ condensing flue gas heat recovery+ water creation...  

Open Energy Info (EERE)

natural gas+ condensing flue gas heat recovery+ water creation+ CO2 reduction+ cool exhaust gases+ Energy efficiency+ commercial building energy efficiency+ industrial energy...

358

EIA - Natural Gas Pipeline Network - Largest Natural Gas Pipeline...  

U.S. Energy Information Administration (EIA) Indexed Site

Interstate Pipelines Table About U.S. Natural Gas Pipelines - Transporting Natural Gas based on data through 20072008 with selected updates Thirty Largest U.S. Interstate Natural...

359

,"New York Natural Gas Gross Withdrawals from Shale Gas (Million...  

U.S. Energy Information Administration (EIA) Indexed Site

,,"(202) 586-8800",,,"2262015 9:43:21 AM" "Back to Contents","Data 1: New York Natural Gas Gross Withdrawals from Shale Gas (Million Cubic Feet)"...

360

Questar Gas- Home Builder Gas Appliance Rebate Program (Idaho)  

Broader source: Energy.gov [DOE]

Questar Gas provides incentives for home builders who incorporate energy efficiency into new construction. Rebates are provided for energy efficient gas equipment placed into new construction....

Note: This page contains sample records for the topic "gas rig counts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Questar Gas- Home Builder Gas Appliance Rebate Program  

Broader source: Energy.gov [DOE]

Questar Gas provides incentives for home builders to construct energy efficient homes. Rebates are provided for energy efficient gas equipment. Builders can also receive whole house rebates for...

362

Questar Gas- Home Builder Gas Appliance Rebate Program  

Broader source: Energy.gov [DOE]

Questar Gas provides incentives for home builders to construct energy efficient homes. Rebates are provided for both energy efficient gas equipment and whole home Energy Star certification. All...

363

Oil and Gas CDT Using noble gas isotopes to develop a mechanistic understanding of shale gas  

E-Print Network [OSTI]

Oil and Gas CDT Using noble gas isotopes to develop a mechanistic understanding of shale gas, desorbtion, tracing, migration Overview The discovery of shale gas in UK Shales demonstrates how important and no doubt will vary from shale to shale. An improved understanding of the controls on gas production from

Henderson, Gideon

364

The Gas/Electric Partnership  

E-Print Network [OSTI]

The electric and gas industries are each in the process of restructuring and "converging" toward one mission: providing energy. Use of natural gas in generating electric power and use of electricity in transporting natural gas will increase...

Schmeal, W. R.; Royall, D.; Wrenn, K. F. Jr.

365

Oil and Gas Program (Tennessee)  

Broader source: Energy.gov [DOE]

The Oil and Gas section of the Tennessee Code, found in Title 60, covers all regulations, licenses, permits, and laws related to the production of natural gas. The laws create the Oil and Gas...

366

Oil and Gas Production (Missouri)  

Broader source: Energy.gov [DOE]

A State Oil and Gas Council regulates and oversees oil and gas production in Missouri, and conducts a biennial review of relevant rules and regulations. The waste of oil and gas is prohibited. This...

367

Oil and Gas Supply Module  

Gasoline and Diesel Fuel Update (EIA)

Onshore Lower 48 Oil and Gas Supply Submodule, Offshore Oil and Gas Supply Submodule, Oil Shale Supply Submodule1, and Alaska Oil and Gas Supply Submodule. A detailed description...

368

Oil and Gas Supply Module  

Gasoline and Diesel Fuel Update (EIA)

Onshore Lower 48 Oil and Gas Supply Submodule, Offshore Oil and Gas Supply Submodule, Oil Shale Supply Submodule, and Alaska Oil and Gas Supply Submodule. A detailed description of...

369

Exhaust gas recirculation apparatus  

SciTech Connect (OSTI)

Apparatus is disclosed for recirculating combustion exhaust gases to the burner region of a Stirling cycle hot-gas engine to lower combustion temperature and reduct NO/sub x/ formation includes a first wall separating the exhaust gas stream from the inlet air stream, a second wall separating the exhaust gas stream from the burner region, and low flow resistance ejectors formed in the first and second walls for admitting the inlet air to the burner region and for entraining and mixing with the inlet air portion of the exhaust gas stream. In a preferred embodiment the ejectors are arranged around the periphery of a cylindrical burner region and oriented to admit the air/exhaust gas mixture tangentially to promote mixing. In another preferred embodiment a single annular ejector surrounds and feeds the air/exhaust gas mixture to a cylindrical burner region. The annular ejector includes an annular plate with radially-directed flow passages to provide an even distribution of the air/exhaust gas mixture to the burner region.

Egnell, R.A.; Hansson, B.L.

1981-07-14T23:59:59.000Z

370

Gas Storage Technology Consortium  

SciTech Connect (OSTI)

Gas storage is a critical element in the natural gas industry. Producers, transmission and distribution companies, marketers, and end users all benefit directly from the load balancing function of storage. The unbundling process has fundamentally changed the way storage is used and valued. As an unbundled service, the value of storage is being recovered at rates that reflect its value. Moreover, the marketplace has differentiated between various types of storage services and has increasingly rewarded flexibility, safety, and reliability. The size of the natural gas market has increased and is projected to continue to increase towards 30 trillion cubic feet (TCF) over the next 10 to 15 years. Much of this increase is projected to come from electric generation, particularly peaking units. Gas storage, particularly the flexible services that are most suited to electric loads, is crucial in meeting the needs of these new markets. To address the gas storage needs of the natural gas industry, an industry-driven consortium was created - the Gas Storage Technology Consortium (GSTC). The objective of the GSTC is to provide a means to accomplish industry-driven research and development designed to enhance the operational flexibility and deliverability of the nation's gas storage system, and provide a cost-effective, safe, and reliable supply of natural gas to meet domestic demand. This report addresses the activities for the quarterly period of January1, 2007 through March 31, 2007. Key activities during this time period included: {lg_bullet} Drafting and distributing the 2007 RFP; {lg_bullet} Identifying and securing a meeting site for the GSTC 2007 Spring Proposal Meeting; {lg_bullet} Scheduling and participating in two (2) project mentoring conference calls; {lg_bullet} Conducting elections for four Executive Council seats; {lg_bullet} Collecting and compiling the 2005 GSTC Final Project Reports; and {lg_bullet} Outreach and communications.

Joel L. Morrison; Sharon L. Elder

2007-03-31T23:59:59.000Z

371

Gas Storage Technology Consortium  

SciTech Connect (OSTI)

Gas storage is a critical element in the natural gas industry. Producers, transmission & distribution companies, marketers, and end users all benefit directly from the load balancing function of storage. The unbundling process has fundamentally changed the way storage is used and valued. As an unbundled service, the value of storage is being recovered at rates that reflect its value. Moreover, the marketplace has differentiated between various types of storage services, and has increasingly rewarded flexibility, safety, and reliability. The size of the natural gas market has increased and is projected to continue to increase towards 30 trillion cubic feet (TCF) over the next 10 to 15 years. Much of this increase is projected to come from electric generation, particularly peaking units. Gas storage, particularly the flexible services that are most suited to electric loads, is critical in meeting the needs of these new markets. In order to address the gas storage needs of the natural gas industry, an industry-driven consortium was created--the Gas Storage Technology Consortium (GSTC). The objective of the GSTC is to provide a means to accomplish industry-driven research and development designed to enhance operational flexibility and deliverability of the Nation's gas storage system, and provide a cost effective, safe, and reliable supply of natural gas to meet domestic demand. This report addresses the activities for the quarterly period of April 1 to June 30, 2006. Key activities during this time period include: (1) Develop and process subcontract agreements for the eight projects selected for cofunding at the February 2006 GSTC Meeting; (2) Compiling and distributing the three 2004 project final reports to the GSTC Full members; (3) Develop template, compile listserv, and draft first GSTC Insider online newsletter; (4) Continue membership recruitment; (5) Identify projects and finalize agenda for the fall GSTC/AGA Underground Storage Committee Technology Transfer Workshop in San Francisco, CA; and (6) Identify projects and prepare draft agenda for the fall GSTC Technology Transfer Workshop in Pittsburgh, PA.

Joel L. Morrison; Sharon L. Elder

2006-07-06T23:59:59.000Z

372

Gas Storage Technology Consortium  

SciTech Connect (OSTI)

Gas storage is a critical element in the natural gas industry. Producers, transmission and distribution companies, marketers, and end users all benefit directly from the load balancing function of storage. The unbundling process has fundamentally changed the way storage is used and valued. As an unbundled service, the value of storage is being recovered at rates that reflect its value. Moreover, the marketplace has differentiated between various types of storage services and has increasingly rewarded flexibility, safety, and reliability. The size of the natural gas market has increased and is projected to continue to increase towards 30 trillion cubic feet over the next 10 to 15 years. Much of this increase is projected to come from electric generation, particularly peaking units. Gas storage, particularly the flexible services that are most suited to electric loads, is crucial in meeting the needs of these new markets. To address the gas storage needs of the natural gas industry, an industry-driven consortium was created--the Gas Storage Technology Consortium (GSTC). The objective of the GSTC is to provide a means to accomplish industry-driven research and development designed to enhance the operational flexibility and deliverability of the nation's gas storage system, and provide a cost-effective, safe, and reliable supply of natural gas to meet domestic demand. This report addresses the activities for the quarterly period of April 1, 2007 through June 30, 2007. Key activities during this time period included: (1) Organizing and hosting the 2007 GSTC Spring Meeting; (2) Identifying the 2007 GSTC projects, issuing award or declination letters, and begin drafting subcontracts; (3) 2007 project mentoring teams identified; (4) New NETL Project Manager; (5) Preliminary planning for the 2007 GSTC Fall Meeting; (6) Collecting and compiling the 2005 GSTC project final reports; and (7) Outreach and communications.

Joel L. Morrison; Sharon L. Elder

2007-06-30T23:59:59.000Z

373

Gas Storage Technology Consortium  

SciTech Connect (OSTI)

Gas storage is a critical element in the natural gas industry. Producers, transmission and distribution companies, marketers, and end users all benefit directly from the load balancing function of storage. The unbundling process has fundamentally changed the way storage is used and valued. As an unbundled service, the value of storage is being recovered at rates that reflect its value. Moreover, the marketplace has differentiated between various types of storage services, and has increasingly rewarded flexibility, safety, and reliability. The size of the natural gas market has increased and is projected to continue to increase towards 30 trillion cubic feet (TCF) over the next 10 to 15 years. Much of this increase is projected to come from electric generation, particularly peaking units. Gas storage, particularly the flexible services that are most suited to electric loads, is critical in meeting the needs of these new markets. In order to address the gas storage needs of the natural gas industry, an industry-driven consortium was created--the Gas Storage Technology Consortium (GSTC). The objective of the GSTC is to provide a means to accomplish industry-driven research and development designed to enhance operational flexibility and deliverability of the Nation's gas storage system, and provide a cost effective, safe, and reliable supply of natural gas to meet domestic demand. This report addresses the activities for the quarterly period of January 1, 2006 through March 31, 2006. Activities during this time period were: (1) Organize and host the 2006 Spring Meeting in San Diego, CA on February 21-22, 2006; (2) Award 8 projects for co-funding by GSTC for 2006; (3) New members recruitment; and (4) Improving communications.

Joel L. Morrison; Sharon L. Elder

2006-05-10T23:59:59.000Z

374

Gas only nozzle  

DOE Patents [OSTI]

A diffusion flame nozzle gas tip is provided to convert a dual fuel nozzle to a gas only nozzle. The nozzle tip diverts compressor discharge air from the passage feeding the diffusion nozzle air swirl vanes to a region vacated by removal of the dual fuel components, so that the diverted compressor discharge air can flow to and through effusion holes in the end cap plate of the nozzle tip. In a preferred embodiment, the nozzle gas tip defines a cavity for receiving the compressor discharge air from a peripheral passage of the nozzle for flow through the effusion openings defined in the end cap plate.

Bechtel, William Theodore (15 Olde Coach Rd., Scotia, NY 12302); Fitts, David Orus (286 Sweetman Rd., Ballston Spa, NY 12020); DeLeonardo, Guy Wayne (60 St. Stephens La., Glenville, NY 12302)

2002-01-01T23:59:59.000Z

375

Gas ampoule-syringe  

DOE Patents [OSTI]

A gas ampoule for the shipment and delivery of radioactive gases. The gas ampoule having a glass tube with serum bottle stopper on one and a plunger tip in the opposite end all fitting in a larger plastic tube threaded on each end with absorbent between the tubes, is seated onto the internal needle assembly via a bushing associated with the plunger and locked into the syringe barrel via barrel-bushing locking caps. The design practically eliminates the possibility of personnel contamination due to an inadvertent exposure of such personnel to the contained radioactive gas.

Gay, D.D.

1985-02-02T23:59:59.000Z

376

Gas ampoule-syringe  

DOE Patents [OSTI]

A gas ampoule for the shipment and delivery of radioactive gases. The gas ampoule having a glass tube with serum bottle stopper on one end and a plunger tip in the opposite end all fitting in a larger plastic tube threaded on each end with absorbent between the tubes, is seated onto the internal needle assembly via a bushing associated with the plunger and locked into the syringe barrel via barrel-bushing locking caps. The design practically eliminates the possibility of personnel contamination due to an inadvertent exposure of such personnel to the contained radioactive gas.

Gay, Don D. (Aiken, SC)

1986-01-01T23:59:59.000Z

377

Landfill Gas Resources and Technologies  

Broader source: Energy.gov [DOE]

This page provides a brief overview of landfill gas energy resources and technologies supplemented by specific information to apply landfill gas energy within the Federal sector.

378

Citizens Gas- Residential Efficiency Rebates  

Broader source: Energy.gov [DOE]

Citizens Gas of Indiana offers rebates to its residential customers for the installation of several types of efficient natural gas appliances. Rebates are generally available for residential homes...

379

Regulations For Gas Companies (Tennessee)  

Broader source: Energy.gov [DOE]

The Regulations for Gas Companies, implemented by the Tennessee Regulatory Authority (Authority) outline the standards for metering, distribution and electricity generation for utilities using gas....

380

Historical Natural Gas Annual 1999  

U.S. Energy Information Administration (EIA) Indexed Site

1999 The Historical Natural Gas Annual contains historical information on supply and disposition of natural gas at the national, regional, and State level as well as prices at...

Note: This page contains sample records for the topic "gas rig counts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Natural Gas | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Fossil Natural Gas Natural Gas September 15, 2014 NETL Releases Hydraulic Fracturing Study The National Energy Technology Laboratory has released a technical report on the...

382

ComEd, Nicor Gas, Peoples Gas and North Shore Gas- Bonus Rebate Program (Illinois)  

Broader source: Energy.gov [DOE]

ComEd, Nicor Gas, Peoples Gas and North Shore Gas are offering a Complete System Replacement Rebate Program to residential customers. The program is a bundled promotion in partnership with ComEd...

383

Gas Pipelines (Texas)  

Broader source: Energy.gov [DOE]

This chapter applies to any entity that owns, manages, operates, leases, or controls a pipeline for the purpose of transporting natural gas in the state for sale or compensation, as well as any...

384

Gas-Saving Tips  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Properly Tuned Fixing a car that is noticeably out of tune or has failed an emis- sions test can improve its gas mileage by an average of 4 percent. However, results vary based on...

385

Natural gas repowering experience  

SciTech Connect (OSTI)

Gas Research Institute has led a variety of projects in the past two years with respect to repowering with natural gas. These activities, including workshops, technology evaluations, and market assessments, have indicated that a significant opportunity for repowering exists. It is obvious that the electric power industry`s restructuring and the actual implementation of environmental regulations from the Clean Air Act Amendments will have significant impact on repowering with respect to timing and ultimate size of the market. This paper summarizes the results and implications of these activities in repowering with natural gas. It first addresses the size of the potential market and discusses some of the significant issues with respect to this market potential. It then provides a perspective on technical options for repowering which are likely to be competitive in the current environment. Finally, it addresses possible actions by the gas industry and GRI to facilitate development of the repowering market.

Bautista, P.J.; Fay, J.M. [Gas Research Institute, Chicago, IL (United States); Gerber, F.B. [BENTEK Energy Research, DeSoto, TX (United States)

1995-12-31T23:59:59.000Z

386

Gas Separation Using Membranes  

E-Print Network [OSTI]

Commercial membrane-based gas separator systems based upon high-flux, asymmetric polysulfone hollow fibers were first introduced in 1977 by Monsanto. These systems were packaged in compact modules containing large amounts of permeation surface area...

Koros, W. J.; Paul, D. R.

1984-01-01T23:59:59.000Z

387

Holographic Chaplygin gas model  

E-Print Network [OSTI]

In this paper we consider a correspondence between the holographic dark energy density and Chaplygin gas energy density in FRW universe. Then we reconstruct the potential and the dynamics of the scalar field which describe the Chaplygin cosmology.

M R Setare

2007-04-27T23:59:59.000Z

388

Gas Pipeline Securities (Indiana)  

Broader source: Energy.gov [DOE]

This statute establishes that entities engaged in the transmission of gas by pipelines are not required to obtain the consent of the Utility Regulatory Commission for issuance of stocks,...

389

Natural Gas Regulations (Kentucky)  

Broader source: Energy.gov [DOE]

Kentucky Administrative Regulation title 805 promulgates the rules and regulations pertaining to natural gas production in Kentucky. In addition to KAR title 405, chapter 30, which pertains to any...

390

Natural gas monthly  

SciTech Connect (OSTI)

This document highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Data presented include volume and price, production, consumption, underground storage, and interstate pipeline activities.

NONE

1996-05-01T23:59:59.000Z

391

Greenhouse Gas Emissions (Minnesota)  

Broader source: Energy.gov [DOE]

This statute sets goals for the reduction of statewide greenhouse gas emissions by at least 15 percent by 2015, 30 percent by 2025, and 80 percent by 2050, calculated relative to 2005 levels. These...

392

Home Safety: Radon Gas  

E-Print Network [OSTI]

Every home should be tested for radon, an invisible, odorless, radioactive gas that occurs naturally. Radon is estimated to be the second leading cause of lung cancer in the United States. However, with proper equipment, radon is easy to detect... poten- tial for radon (Fig. 1), homes in Texas have been found to have radon levels that exceed U.S. Environ- mental Protection Agency (EPA) recommendations. Every home is susceptible to a radon gas problem. Health/cancer risks Radon produces...

Shaw, Bryan W.; Denny, Monica L.

1999-11-12T23:59:59.000Z

393

U-GAS process  

SciTech Connect (OSTI)

The Institute of Gas Technology (IGT) has developed an advanced coal gasification process. The U-GAS process has been extensively tested in a pilot plant to firmly establish process feasibility and provide a large data base for scale-up and design of the first commercial plant. The U-GAS process is considered to be one of the more flexible, efficient, and economical coal gasification technologies developed in the US during the last decade. The U-GAS technology is presently available for licensing from GDC, Inc., a wholly-owned subsidiary of IGT. The U-GAS process accomplishes four important functions in a single-stage, fluidized-bed gasifier: It decakes coal, devolatilizes coal, gasifies coal, and agglomerates and separates ash from char. Simultaneously with coal gasification, the ash is agglomerated into spherical particles and separated from the bed. Part of the fluidizing gas enters the gasifier through a sloping grid. The remaining gas flows upward at a high velocity through the ash agglomerating device and forms a hot zone within the fluidized bed. High-ash-content particles agglomerate under these conditions and grow into larger and heavier particles. Agglomerates grow in size until they can be selectively separated and discharged from the bed into water-filled ash hoppers where they are withdrawn as a slurry. In this manner, the fluidized bed achieves the same low level of carbon losses in the discharge ash generally associated with the ash-slagging type of gasifier. Coal fines elutriated from the fluidized bed are collected in two external cyclones. Fines from the first cyclone are returned to the bed and fines from the second cyclone are returned to the ash agglomerating zone, where they are gasified, and the ash agglomerated with bed ash. The raw product gas is virtually free of tar and oils, thus simplifying ensuing heat recovery and purification steps.

Schora, F.C.; Patel, J.G.

1982-01-01T23:59:59.000Z

394

Detection of illicit HEU production in gaseous centrifuge enrichment plants using neutron counting techniques on product cylinders  

SciTech Connect (OSTI)

Innovative and novel safeguards approaches are needed for nuclear energy to meet global energy needs without the threat of nuclear weapons proliferation. Part of these efforts will include creating verification techniques that can monitor uranium enrichment facilities for illicit production of highly-enriched uranium (HEU). Passive nondestructive assay (NDA) techniques will be critical in preventing illicit HEU production because NDA offers the possibility of continuous and unattended monitoring capabilities with limited impact on facility operations. Gaseous centrifuge enrichment plants (GCEP) are commonly used to produce low-enriched uranium (LEU) for reactor fuel. In a GCEP, gaseous UF{sub 6} spins at high velocities in centrifuges to separate the molecules containing {sup 238}U from those containing the lighter {sup 235}U. Unfortunately, the process for creating LEU is inherently the same as HEU, creating a proliferation concern. Insuring that GCEPs are producing declared enrichments poses many difficult challenges. In a GCEP, large cascade halls operating thousands of centrifuges work together to enrich the uranium which makes effective monitoring of the cascade hall economically prohibitive and invasive to plant operations. However, the enriched uranium exiting the cascade hall fills product cylinders where the UF{sub 6} gas sublimes and condenses for easier storage and transportation. These product cylinders hold large quantities of enriched uranium, offering a strong signal for NDA measurement. Neutrons have a large penetrability through materials making their use advantageous compared to gamma techniques where the signal is easily attenuated. One proposed technique for detecting HEU production in a GCEP is using neutron coincidence counting at the product cylinder take off stations. This paper discusses findings from Monte Carlo N-Particle eXtended (MCNPX) code simulations that examine the feasibility of such a detector.

Freeman, Corey R [Los Alamos National Laboratory; Geist, William H [Los Alamos National Laboratory

2010-01-01T23:59:59.000Z

395

Shale gas production: potential versus actual greenhouse gas emissions*  

E-Print Network [OSTI]

Shale gas production: potential versus actual greenhouse gas emissions* Francis O, monitor and verify greenhouse gas emissions and climatic impacts. This reprint is one of a series intended Environ. Res. Lett. 7 (2012) 044030 (6pp) doi:10.1088/1748-9326/7/4/044030 Shale gas production: potential

396

Oil and Gas CDT Coupled flow of water and gas  

E-Print Network [OSTI]

Oil and Gas CDT Coupled flow of water and gas during hydraulic fracture in shale The University of Oxford http://www.earth.ox.ac.uk/people/profiles/academic/joec Key Words Shale gas, hydraulic fracture, groundwater contamination, transport in porous media Overview Recovery of natural gas from mudstone (shale

Henderson, Gideon

397

HD gas analysis with Gas Chromatography and Quadrupole Mass Spectrometer  

E-Print Network [OSTI]

A gas analyzer system has been developed to analyze Hydrogen-Deuteride (HD) gas for producing frozen-spin polarized HD targets, which are used for hadron photoproduction experiments at SPring-8. Small amounts of ortho-H$_{2}$ and para-D$_{2}$ gas mixtures ($\\sim$0.01%) in the purified HD gas are a key to realize a frozen-spin polarized target. In order to obtain reliable concentrations of these gas mixtures in the HD gas, we produced a new gas analyzer system combining two independent measurements with the gas chromatography and the QMS. The para-H$_{2}$, ortho-H$_{2}$, HD, and D$_{2}$ are separated using the retention time of the gas chromatography and the mass/charge. It is found that the new gas analyzer system can measure small concentrations of $\\sim$0.01% for the otho-H$_2$ and D$_2$ with good S/N ratios.

T. Ohta; S. Bouchigny; J. -P. Didelez; M. Fujiwara; K. Fukuda; H. Kohri; T. Kunimatsu; C. Morisaki; S. Ono; G. Rouille; M. Tanaka; K. Ueda; M. Uraki; M. Utsuro; S. Y. Wang; M. Yosoi

2011-01-28T23:59:59.000Z

398

Laser Oil and Gas Well Drilling Demonstration Videos  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

ANL's Laser Applications Laboratory and collaborators are examining the feasibility of adapting high-power laser technology to drilling for gas and oil. The initial phase is designed to establish a scientific basis for developing a commercial laser drilling system and determine the level of gas industry interest in pursuing future research. Using lasers to bore a hole offers an entirely new approach to mechanical drilling. The novel drilling system would transfer light energy from lasers on the surface, down a borehole by a fiber optic bundle, to a series of lenses that would direct the laser light to the rock face. Researchers believe that state-of-the-art lasers have the potential to penetrate rock many times faster than conventional boring technologies - a huge benefit in reducing the high costs of operating a drill rig. Because the laser head does not contact the rock, there is no need to stop drilling to replace a mechanical bit. Moreover, researchers believe that lasers have the ability to melt the rock in a way that creates a ceramic sheath in the wellbore, eliminating the expense of buying and setting steel well casing. A laser system could also contain a variety of downhole sensors, including visual imaging systems that could communicate with the surface through the fiber optic cabling. Earlier studies have been promising, but there is still much to learn. One of the primary objectives of the new study will be to obtain much more precise measurements of the energy requirements needed to transmit light from surface lasers down a borehole with enough power to bore through rocks as much as 20,000 feet or more below the surface. Another objective will be to determine if sending the laser light in sharp pulses, rather than as a continuous stream, could further increase the rate of rock penetration. A third aspect will be to determine if lasers can be used in the presence of drilling fluids. In most wells, thick fluids called "drilling muds" are injected into the borehole to wash out rock cuttings and keep water and other fluids from the underground formations from seeping into the well. The technical challenge will be to determine whether too much laser energy is expended to clear away the fluid where the drilling is occurring. (Copied with editing from http://www.ne.anl.gov/facilities/lal/laser_drilling.html). The demonstration videos, provided here in QuickTime format, are accompanied by patent documents and PDF reports that, together, provide an overall picture of this fascinating project.

399

Gas Storage Technology Consortium  

SciTech Connect (OSTI)

Gas storage is a critical element in the natural gas industry. Producers, transmission and distribution companies, marketers, and end users all benefit directly from the load balancing function of storage. The unbundling process has fundamentally changed the way storage is used and valued. As an unbundled service, the value of storage is being recovered at rates that reflect its value. Moreover, the marketplace has differentiated between various types of storage services, and has increasingly rewarded flexibility, safety, and reliability. The size of the natural gas market has increased and is projected to continue to increase towards 30 trillion cubic feet (TCF) over the next 10 to 15 years. Much of this increase is projected to come from electric generation, particularly peaking units. Gas storage, particularly the flexible services that are most suited to electric loads, is critical in meeting the needs of these new markets. In order to address the gas storage needs of the natural gas industry, an industry-driven consortium was created-the Gas Storage Technology Consortium (GSTC). The objective of the GSTC is to provide a means to accomplish industry-driven research and development designed to enhance operational flexibility and deliverability of the Nation's gas storage system, and provide a cost effective, safe, and reliable supply of natural gas to meet domestic demand. This report addresses the activities for the quarterly period of July 1, 2006 to September 30, 2006. Key activities during this time period include: {lg_bullet} Subaward contracts for all 2006 GSTC projects completed; {lg_bullet} Implement a formal project mentoring process by a mentor team; {lg_bullet} Upcoming Technology Transfer meetings: {sm_bullet} Finalize agenda for the American Gas Association Fall Underground Storage Committee/GSTC Technology Transfer Meeting in San Francisco, CA. on October 4, 2006; {sm_bullet} Identify projects and finalize agenda for the Fall GSTC Technology Transfer Meeting, Pittsburgh, PA on November 8, 2006; {lg_bullet} Draft and compile an electronic newsletter, the GSTC Insider; and {lg_bullet} New members update.

Joel L. Morrison; Sharon L. Elder

2006-09-30T23:59:59.000Z

400

GAS STORAGE TECHNOLOGY CONSORTIUM  

SciTech Connect (OSTI)

Gas storage is a critical element in the natural gas industry. Producers, transmission and distribution companies, marketers, and end users all benefit directly from the load balancing function of storage. The unbundling process has fundamentally changed the way storage is used and valued. As an unbundled service, the value of storage is being recovered at rates that reflect its value. Moreover, the marketplace has differentiated between various types of storage services, and has increasingly rewarded flexibility, safety, and reliability. The size of the natural gas market has increased and is projected to continue to increase towards 30 trillion cubic feet (TCF) over the next 10 to 15 years. Much of this increase is projected to come from electric generation, particularly peaking units. Gas storage, particularly the flexible services that are most suited to electric loads, is critical in meeting the needs of these new markets. In order to address the gas storage needs of the natural gas industry, an industry-driven consortium was created--the Gas Storage Technology Consortium (GSTC). The objective of the GSTC is to provide a means to accomplish industry-driven research and development designed to enhance operational flexibility and deliverability of the Nation's gas storage system, and provide a cost effective, safe, and reliable supply of natural gas to meet domestic demand. To accomplish this objective, the project is divided into three phases that are managed and directed by the GSTC Coordinator. Base funding for the consortium is provided by the U.S. Department of Energy (DOE). In addition, funding is anticipated from the Gas Technology Institute (GTI). The first phase, Phase 1A, was initiated on September 30, 2003, and is scheduled for completion on March 31, 2004. Phase 1A of the project includes the creation of the GSTC structure, development of constitution (by-laws) for the consortium, and development and refinement of a technical approach (work plan) for deliverability enhancement and reservoir management. This report deals with the second 3-months of the project and encompasses the period December 31, 2003, through March 31, 2003. During this 3-month, the dialogue of individuals representing the storage industry, universities and the Department of energy was continued and resulted in a constitution for the operation of the consortium and a draft of the initial Request for Proposals (RFP).

Robert W. Watson

2004-04-17T23:59:59.000Z

Note: This page contains sample records for the topic "gas rig counts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

GAS STORAGE TECHNOLOGY CONSORTIUM  

SciTech Connect (OSTI)

Gas storage is a critical element in the natural gas industry. Producers, transmission and distribution companies, marketers, and end users all benefit directly from the load balancing function of storage. The unbundling process has fundamentally changed the way storage is used and valued. As an unbundled service, the value of storage is being recovered at rates that reflect its value. Moreover, the marketplace has differentiated between various types of storage services, and has increasingly rewarded flexibility, safety, and reliability. The size of the natural gas market has increased and is projected to continue to increase towards 30 trillion cubic feet (TCF) over the next 10 to 15 years. Much of this increase is projected to come from electric generation, particularly peaking units. Gas storage, particularly the flexible services that are most suited to electric loads, is critical in meeting the needs of these new markets. In order to address the gas storage needs of the natural gas industry, an industry-driven consortium was created--the Gas Storage Technology Consortium (GSTC). The objective of the GSTC is to provide a means to accomplish industry-driven research and development designed to enhance operational flexibility and deliverability of the Nation's gas storage system, and provide a cost effective, safe, and reliable supply of natural gas to meet domestic demand. To accomplish this objective, the project is divided into three phases that are managed and directed by the GSTC Coordinator. Base funding for the consortium is provided by the U.S. Department of Energy (DOE). In addition, funding is anticipated from the Gas Technology Institute (GTI). The first phase, Phase 1A, was initiated on September 30, 2003, and was completed on March 31, 2004. Phase 1A of the project included the creation of the GSTC structure, development and refinement of a technical approach (work plan) for deliverability enhancement and reservoir management. This report deals with Phase 1B and encompasses the period April 1, 2004, through June 30, 2004. During this 3-month period, a Request for Proposals (RFP) was made. A total of 17 proposals were submitted to the GSTC. A proposal selection meeting was held June 9-10, 2004 in Morgantown, West Virginia. Of the 17 proposals, 6 were selected for funding.

Robert W. Watson

2004-07-15T23:59:59.000Z

402

Beyond the Hubble Deep Field Limiting Magnitude: Faint Galaxy Number Counts from Surface-Brightness Fluctuations  

E-Print Network [OSTI]

The faint end of the differential galaxy number counts, n(m), in the Hubble Deep Field (HDF) North has been determined for the F450W, F606W, and F814W filters by means of surface-brightness fluctuation (SBF) measurements. This technique allows us to explore n(m) beyond the limiting magnitude of the HDF, providing new, stronger constraints on the faint end of n(m). This has allowed us to test the validity of previous number count studies and to produce a new determination of the faint end of n(m) for magnitudes fainter than 28.8 in the AB system and to extend this estimate down to 31. This value represents an extension of more than two magnitudes beyond the limits of previous photometric studies. The obtained n(m) slopes are \\gamma=0.27, 0.21, and 0.26 in B_{450}, V_{606}, and I_{814}, respectively.

A. Marin-Franch; A. Aparicio

2003-05-16T23:59:59.000Z

403

Characteristic Count Rate Profiles for a Rotating Modulator Gamma-Ray Imager  

E-Print Network [OSTI]

Rotating modulation is a technique for indirect imaging in the hard x-ray and soft gamma-ray energy bands, which may offer an advantage over coded aperture imaging at high energies. A rotating modulator (RM) consists of a single mask of co-planar parallel slats typically spaced equidistance apart, suspended above an array of circular non-imaging detectors. The mask rotates, temporally modulating the transmitted image of the object scene. The measured count rate profiles of each detector are folded modulo the mask rotational period, and the object scene is reconstructed using pre-determined characteristic modulation profiles. The use of Monte Carlo simulation to derive the characteristic count rate profiles is accurate but computationally expensive; an analytic approach is preferred for its speed of computation. We present both the standard and a new advanced characteristic formula describing the modulation pattern of the RM; the latter is a more robust description of the instrument response developed as part ...

Budden, Brent S; Case, Gary L; Cherry, Michael L

2011-01-01T23:59:59.000Z

404

Gas intrusion into SPR caverns  

SciTech Connect (OSTI)

The conditions and occurrence of gas in crude oil stored in Strategic Petroleum Reserve, SPR, caverns is characterized in this report. Many caverns in the SPR show that gas has intruded into the oil from the surrounding salt dome. Historical evidence and the analyses presented here suggest that gas will continue to intrude into many SPR caverns in the future. In considering why only some caverns contain gas, it is concluded that the naturally occurring spatial variability in salt permeability can explain the range of gas content measured in SPR caverns. Further, it is not possible to make a one-to-one correlation between specific geologic phenomena and the occurrence of gas in salt caverns. However, gas is concluded to be petrogenic in origin. Consequently, attempts have been made to associate the occurrence of gas with salt inhomogeneities including anomalies and other structural features. Two scenarios for actual gas intrusion into caverns were investigated for consistency with existing information. These scenarios are gas release during leaching and gas permeation through salt. Of these mechanisms, the greater consistency comes from the belief that gas permeates to caverns through the salt. A review of historical operating data for five Bryan Mound caverns loosely supports the hypothesis that higher operating pressures reduce gas intrusion into caverns. This conclusion supports a permeability intrusion mechanism. Further, it provides justification for operating the caverns near maximum operating pressure to minimize gas intrusion. Historical gas intrusion rates and estimates of future gas intrusion are given for all caverns.

Hinkebein, T.E.; Bauer, S.J.; Ehgartner, B.L.; Linn, J.K.; Neal, J.T.; Todd, J.L.; Kuhlman, P.S.; Gniady, C.T. [Sandia National Labs., Albuquerque, NM (United States). Underground Storage Technology Dept.; Giles, H.N. [Dept. of Energy, Washington, DC (United States). Strategic Petroleum Reserve

1995-12-01T23:59:59.000Z

405

REVISED NATURAL GAS MARKET ASSESSMENT  

E-Print Network [OSTI]

CALIFORNIA ENERGY COMMISSION REVISED NATURAL GAS MARKET ASSESSMENT In Support of the 2007's natural gas market. It covers natural gas demand, supply, infrastructure, price, and possible alternative and the related Scenarios Project, and additional updated information. California natural gas demand growth

406

Gas releases from salt  

SciTech Connect (OSTI)

The occurrence of gas in salt mines and caverns has presented some serious problems to facility operators. Salt mines have long experienced sudden, usually unexpected expulsions of gas and salt from a production face, commonly known as outbursts. Outbursts can release over one million cubic feet of methane and fractured salt, and are responsible for the lives of numerous miners and explosions. Equipment, production time, and even entire mines have been lost due to outbursts. An outburst creates a cornucopian shaped hole that can reach heights of several hundred feet. The potential occurrence of outbursts must be factored into mine design and mining methods. In caverns, the occurrence of outbursts and steady infiltration of gas into stored product can effect the quality of the product, particularly over the long-term, and in some cases renders the product unusable as is or difficult to transport. Gas has also been known to collect in the roof traps of caverns resulting in safety and operational concerns. The intent of this paper is to summarize the existing knowledge on gas releases from salt. The compiled information can provide a better understanding of the phenomena and gain insight into the causative mechanisms that, once established, can help mitigate the variety of problems associated with gas releases from salt. Outbursts, as documented in mines, are discussed first. This is followed by a discussion of the relatively slow gas infiltration into stored crude oil, as observed and modeled in the caverns of the US Strategic Petroleum Reserve. A model that predicts outburst pressure kicks in caverns is also discussed.

Ehgartner, B.; Neal, J.; Hinkebein, T.

1998-06-01T23:59:59.000Z

407

Counts-in-Cylinders in the Sloan Digital Sky Survey with Comparisons to N-Body  

SciTech Connect (OSTI)

Environmental statistics provide a necessary means of comparing the properties of galaxies in different environments and a vital test of models of galaxy formation within the prevailing, hierarchical cosmological model. We explore counts-in-cylinders, a common statistic defined as the number of companions of a particular galaxy found within a given projected radius and redshift interval. Galaxy distributions with the same two-point correlation functions do not necessarily have the same companion count distributions. We use this statistic to examine the environments of galaxies in the Sloan Digital Sky Survey, Data Release 4. We also make preliminary comparisons to four models for the spatial distributions of galaxies, based on N-body simulations, and data from SDSS DR4 to study the utility of the counts-in-cylinders statistic. There is a very large scatter between the number of companions a galaxy has and the mass of its parent dark matter halo and the halo occupation, limiting the utility of this statistic for certain kinds of environmental studies. We also show that prevalent, empirical models of galaxy clustering that match observed two- and three-point clustering statistics well fail to reproduce some aspects of the observed distribution of counts-in-cylinders on 1, 3 and 6-h{sup -1}Mpc scales. All models that we explore underpredict the fraction of galaxies with few or no companions in 3 and 6-h{sup -1} Mpc cylinders. Roughly 7% of galaxies in the real universe are significantly more isolated within a 6 h{sup -1} Mpc cylinder than the galaxies in any of the models we use. Simple, phenomenological models that map galaxies to dark matter halos fail to reproduce high-order clustering statistics in low-density environments.

Berrier, Heather D.; Barton, Elizabeth J.; /UC, Irvine; Berrier, Joel C.; /Arkansas U.; Bullock, James S.; /UC, Irvine; Zentner, Andrew R.; /Pittsburgh U.; Wechsler, Risa H. /KIPAC, Menlo Park /SLAC

2010-12-16T23:59:59.000Z

408

Gas cleaning system and method  

SciTech Connect (OSTI)

A gas cleaning system for removing at least a portion of contaminants, such as halides, sulfur, particulates, mercury, and others, from a synthesis gas (syngas). The gas cleaning system may include one or more filter vessels coupled in series for removing halides, particulates, and sulfur from the syngas. The gas cleaning system may be operated by receiving gas at a first temperature and pressure and dropping the temperature of the syngas as the gas flows through the system. The gas cleaning system may be used for an application requiring clean syngas, such as, but not limited to, fuel cell power generation, IGCC power generation, and chemical synthesis.

Newby, Richard Allen

2006-06-06T23:59:59.000Z

409

Calibration of the Accuscan II In Vivo System for I-125 Thyroid Counting  

SciTech Connect (OSTI)

This report describes the March 2011 calibration of the Accuscan II HpGe In Vivo system for I-125 thyroid counting. The source used for the calibration was a DOE manufactured Am-241/Eu-152 source contained in a 22 ml vial BEA Am-241/Eu-152 RMC II-1 with energies from 26 keV to 344 keV. The center of the detector housing was positioned 64 inches from the vault floor. This position places the approximate center line of the detector housing at the center line of the source in the phantom thyroid tube. The energy and efficiency calibration were performed using an RMC II phantom (Appendix J). Performance testing was conducted using source BEA Am-241/Eu-152 RMC II-1 and Validation testing was performed using an I-125 source in a 30 ml vial (I-125 BEA Thyroid 002) and an ANSI N44.3 phantom (Appendix I). This report includes an overview introduction and records for the energy/FWHM and efficiency calibration including performance verification and validation counting. The Accuscan II system was successfully calibrated for counting the thyroid for I-125 and verified in accordance with ANSI/HPS N13.30-1996 criteria.

Ovard R. Perry; David L. Georgeson

2011-07-01T23:59:59.000Z

410

Calibration of the Accuscan II In Vivo System for I-131 Thyroid Counting  

SciTech Connect (OSTI)

This report describes the March 2011 calibration of the Accuscan II HpGe In Vivo system for I-131 thyroid counting. The source used for the calibration was an Analytics mixed gamma source 82834-121 distributed in an epoxy matrix in a Wheaton Liquid Scintillation Vial with energies from 88.0 keV to 1836.1 keV. The center of the detectors was position 64-feet from the vault floor. This position places the approximate center line of the detectors at the center line of the source in the thyroid tube. The calibration was performed using an RMC II phantom (Appendix J). Validation testing was performed using a Ba-133 source and an ANSI N44.3 Phantom (Appendix I). This report includes an overview introduction and records for the energy/FWHM and efficiency calibrations including verification counting. The Accuscan II system was successfully calibrated for counting the thyroid for I-131 and verified in accordance with ANSI/HPS N13.30-1996 criteria.

Orval R. Perry; David L. Georgeson

2011-07-01T23:59:59.000Z

411

Number Counts of GALEX Sources in FUV (1530A) and NUV (2310A) Bands  

E-Print Network [OSTI]

Number Counts of galaxies in two GALEX bands (FUV: 1530A and NUV: 2310A, both in AB magnitudes) are reported. They provide for the first time in the literature homogeneously calibrated number counts of UV galaxies covering continuously a very wide range of UV magnitude (14 -- 23.8). Both the FUV and NUV counts are inconsistent with a non-evolution model, while they are in good agreement with evolution models (essentially luminosity evolution) derived from the high-z UV luminosity functions of Arnouts et al. (2004). It is found that the contribution from galaxies detected by GALEX to the UV background is 0.68+-0.10 nW m-2 sr-1 at 1530A and 0.99+-0.15 nW m-2 sr-1 at 2310A. These are 66+-9% and 44+-6% of the total contributions of galaxies to the the UV background at 1530A, respectively, as estimated using the evolution models. ...

C. Kevin Xu; Jose Donas; Stephane Arnouts; Ted K. Wyder; Mark Seibert; Jorge Iglesias-Paramo; Jeremy Blaizot; Todd Small; Bruno Milliard; David Schiminovich; D. Christopher Martin; Tom A. Barlow; Luciana Bianchi; Yong-Ik Byun; Karl Forster; Peter G. Friedman; Timothy M. Heckman; Patrick N. Jelinsky; Young-Wook Lee; Barry F. Madore; Roger F. Malina; Patrick Morrissey; Susan G. Neff; R. Michael Rich

2004-11-12T23:59:59.000Z

412

NATURAL GAS STORAGE ENGINEERING Kashy Aminian  

E-Print Network [OSTI]

NATURAL GAS STORAGE ENGINEERING Kashy Aminian Petroleum & Natural Gas Engineering, West Virginia University, Morgantown, WV, USA. Shahab D. Mohaghegh Petroleum & Natural Gas Engineering, West Virginia University, Morgantown, WV, USA. Keywords: Gas Storage, Natural Gas, Storage, Deliverability, Inventory

Mohaghegh, Shahab

413

GAS STORAGE TECHNOLOGY CONSORTIUM  

SciTech Connect (OSTI)

Gas storage is a critical element in the natural gas industry. Producers, transmission and distribution companies, marketers, and end users all benefit directly from the load balancing function of storage. The unbundling process has fundamentally changed the way storage is used and valued. As an unbundled service, the value of storage is being recovered at rates that reflect its value. Moreover, the marketplace has differentiated between various types of storage services, and has increasingly rewarded flexibility, safety, and reliability. The size of the natural gas market has increased and is projected to continue to increase towards 30 trillion cubic feet (TCF) over the next 10 to 15 years. Much of this increase is projected to come from electric generation, particularly peaking units. Gas storage, particularly the flexible services that are most suited to electric loads, is critical in meeting the needs of these new markets. In order to address the gas storage needs of the natural gas industry, an industry-driven consortium was created--the Gas Storage Technology Consortium (GSTC). The objective of the GSTC is to provide a means to accomplish industry-driven research and development designed to enhance operational flexibility and deliverability of the Nation's gas storage system, and provide a cost effective, safe, and reliable supply of natural gas to meet domestic demand. To accomplish this objective, the project is divided into three phases that are managed and directed by the GSTC Coordinator. The first phase, Phase 1A, was initiated on September 30, 2003, and was completed on March 31, 2004. Phase 1A of the project included the creation of the GSTC structure, development and refinement of a technical approach (work plan) for deliverability enhancement and reservoir management. This report deals with Phase 1B and encompasses the period July 1, 2004, through September 30, 2004. During this time period there were three main activities. First was the ongoing negotiations of the four sub-awards working toward signed contracts with the various organizations involved. Second, an Executive Council meeting was held at Penn State September 9, 2004. And third, the GSTC participated in the SPE Eastern Regional Meeting in Charleston, West Virginia, on September 16th and 17th. We hosted a display booth with the Stripper Well Consortium.

Robert W. Watson

2004-10-18T23:59:59.000Z

414

Optimization of condensing gas drive  

E-Print Network [OSTI]

- cal, undersaturated reservoir with gas being injected into the crest and oil being produced from the base of the structure. Fractional oil re- covery at gas breakthrough proved to be less sensitive to changes in oil withdrawal rates as the gas... injection pressure was increased. The validity of the model was established by accurately simulating several low pressure gas drives conducted in the laboratory. Oil recoveries at gas breakthrough using the model compared closely with those recoveries...

Lofton, Larry Keith

1977-01-01T23:59:59.000Z

415

Gas separation membrane module assembly  

DOE Patents [OSTI]

A gas-separation membrane module assembly and a gas-separation process using the assembly. The assembly includes a set of tubes, each containing gas-separation membranes, arranged within a housing. The housing contains a tube sheet that divides the space within the housing into two gas-tight spaces. A permeate collection system within the housing gathers permeate gas from the tubes for discharge from the housing.

Wynn, Nicholas P (Palo Alto, CA); Fulton, Donald A. (Fairfield, CA)

2009-03-31T23:59:59.000Z

416

Oil and gas developments in western Canada in 1987  

SciTech Connect (OSTI)

Exploratory drilling in western Canada increased by 21% in 1987 whereas total drilling increased by 32%. The seismic crew count increased 4% to 671 crew-months, and land expenditures increased 166% to $793 million. No major plays broke during 1987 in western Canada. The 2 major plays resulting from 1986 activity - Caroline, Alberta, and Tableland, Saskatchewan - continued to expand in 1987. By year end at Caroline, industry drilled 14 wells, which included 6 Swan Hills gas wells, 3 uphole gas wells, 3 wells standing or suspended, and 2 dry holes. The reserves for this field now are 17 billion m/sup 3/ of sales gas, 32 million m/sup 3/ of condensate, and 20 million MT of sulfur. At Tableland and surrounding areas, industry has drilled 11 oil wells and 16 dry holes. No overall reserve figures have been published for this play. In Alberta, operators had their best exploratory oil success in the Cretaceous Second White Specks and in the Devonian Nisku, Leduc, Gilwood, and Keg River; the best exploratory gas success was in the Cretaceous Viking and Paddy, and Devonian Nisku and Leduc. In British Columbia, gas drilling was successful in the Cretaceous of the Deep Basin, as well as in the Mississippian Kiskatinaw and the Triassic Halfway. In Saskatchewan, both the shallow Cretaceous gas play and the deep Devonian Winnipegosis oil play continued to expand, whereas in Manitoba the main exploration target was the Mississippian carbonates and Bakken Formation. The Northwest Territories, Beaufort Sea, and Arctic Islands had a poor year, with only 4 exploratory wells drilled - all dry holes. 7 figs., 10 tabs.

Portigal, M.H.; Creed, R.M.; Hogg, J.R.; Hewitt, M.D.

1988-10-01T23:59:59.000Z

417

Gas separation process  

SciTech Connect (OSTI)

The method for production of high purity hydrogen and high purity carbon monoxide from a mixed gas stream comprising these components together with carbon dioxide and a zero to a minor amount of one or more other gaseous contaminants is described comprising the steps of: (a) passing the mixed gas stream into and through a first bed of solid adsorbent capable of selectively adsorbing carbon dioxide and water while discharging from the bed a dry CO/sub 2/-freed effluent; (b) introducing the dry CO/sub 2/-freed effluent into a cryogenic environment for cooling the same therein under conditions effective for condensation of at least the major part of the carbon monoxide present in the dry CO/sub 2/-freed effluent; (c) withdrawing from the cryogenic environment carbon monoxide of high purity; (d) separately withdrawing from the cryogenic environment an uncondensed first gas stream product comprised of crude hydrogen and subjecting the first gas stream product to selective adsorption of non-hydrogen components therefrom in a second bed of solid absorbent, while recovering from the second bed the non-sorbed fraction as a product stream of essentially pure hydrogen; (e) purging the second solid adsorbent bed to desorb non-hydrogen components sorbed therein in step (d), and withdrawing from the bed a gas stream comprising the desorbed non-hydrogen components.

Nicholas, D.M.; Hopkins, J.A.; Roden, T.M.; Bushinsky, J.P.

1988-03-22T23:59:59.000Z

418

Ultrafast gas switching experiments  

SciTech Connect (OSTI)

We describe recent experiments which studied the physics of ultrafast gas breakdown under the extreme overvoltages which occur when a high pressure gas switch is pulse charged to hundreds of kV in 1 ns or less. The highly overvolted peaking gaps produce powerful electromagnetic pulses with risetimes < 100 ps which can be used for ultrawideband radar systems, particle accelerators, laser drivers, bioelectromagnetic studies, electromagnetic effects testing, and for basic studies of gas breakdown physics. We have produced and accurately measured pulses with 50 to 100 ps risetimes to peak levels of 75 to 160 kV at pulse repetition frequencies (PRF) to I kHz. A unique gas switch was developed to hold off hundreds of kV with parasitic inductance less than I nH. An advanced diagnostic system using Fourier compensation was developed to measure single-shot risetimes below 35 ps. The complete apparatus is described and wave forms are presented. The measured data are compared with a theoretical model which predicts key features including dependence on gas species and pressure. We have applied this technology to practical systems driving ultrawideband radiating antennas and bounded wave simulators. For example, we have developed a thyristor/pulse transformer based system using a highly overvolted cable switch. This pulser driving a Sandia- designed TEM cell, provides an ultra wideband impulse with < 200 ps risetime to the test object at a PRF > 1 kHz at > 100 kV/m E field.

Frost, C.A.; Martin, T.H.; Patterson, P.E.; Rinehart, L.F.; Rohwein, G.J.; Roose, L.D.; Aurand, J.F.; Buttram, M.T.

1996-11-01T23:59:59.000Z

419

Life-cycle analysis of shale gas and natural gas.  

SciTech Connect (OSTI)

The technologies and practices that have enabled the recent boom in shale gas production have also brought attention to the environmental impacts of its use. Using the current state of knowledge of the recovery, processing, and distribution of shale gas and conventional natural gas, we have estimated up-to-date, life-cycle greenhouse gas emissions. In addition, we have developed distribution functions for key parameters in each pathway to examine uncertainty and identify data gaps - such as methane emissions from shale gas well completions and conventional natural gas liquid unloadings - that need to be addressed further. Our base case results show that shale gas life-cycle emissions are 6% lower than those of conventional natural gas. However, the range in values for shale and conventional gas overlap, so there is a statistical uncertainty regarding whether shale gas emissions are indeed lower than conventional gas emissions. This life-cycle analysis provides insight into the critical stages in the natural gas industry where emissions occur and where opportunities exist to reduce the greenhouse gas footprint of natural gas.

Clark, C.E.; Han, J.; Burnham, A.; Dunn, J.B.; Wang, M. (Energy Systems); ( EVS)

2012-01-27T23:59:59.000Z

420

Gas turbine sealing apparatus  

DOE Patents [OSTI]

A gas turbine includes forward and aft rows of rotatable blades, a row of stationary vanes between the forward and aft rows of rotatable blades, an annular intermediate disc, and a seal housing apparatus. The forward and aft rows of rotatable blades are coupled to respective first and second portions of a disc/rotor assembly. The annular intermediate disc is coupled to the disc/rotor assembly so as to be rotatable with the disc/rotor assembly during operation of the gas turbine. The annular intermediate disc includes a forward side coupled to the first portion of the disc/rotor assembly and an aft side coupled to the second portion of the disc/rotor assembly. The seal housing apparatus is coupled to the annular intermediate disc so as to be rotatable with the annular intermediate disc and the disc/rotor assembly during operation of the gas turbine.

Wiebe, David J; Wessell, Brian J; Ebert, Todd; Beeck, Alexander; Liang, George; Marussich, Walter H

2013-02-19T23:59:59.000Z

Note: This page contains sample records for the topic "gas rig counts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

The Intense Radiation Gas  

E-Print Network [OSTI]

We present a new dispersion relation for photons that are nonlinearly interacting with a radiation gas of arbitrary intensity due to photon-photon scattering. It is found that the photon phase velocity decreases with increasing radiation intensity, it and attains a minimum value in the limit of super-intense fields. By using Hamilton's ray equations, a self-consistent kinetic theory for interacting photons is formulated. The interaction between an electromagnetic pulse and the radiation gas is shown to produce pulse self-compression and nonlinear saturation. Implications of our new results are discussed.

M. Marklund; P. K. Shukla; B. Eliasson

2005-03-08T23:59:59.000Z

422

Gas turbine combustor transition  

DOE Patents [OSTI]

A method is described for converting a steam cooled transition to an air cooled transition in a gas turbine having a compressor in fluid communication with a combustor, a turbine section in fluid communication with the combustor, the transition disposed in a combustor shell and having a cooling circuit connecting a steam outlet and a steam inlet and wherein hot gas flows from the combustor through the transition and to the turbine section, includes forming an air outlet in the transition in fluid communication with the cooling circuit and providing for an air inlet in the transition in fluid communication with the cooling circuit. 7 figs.

Coslow, B.J.; Whidden, G.L.

1999-05-25T23:59:59.000Z

423

Gas turbine combustor transition  

DOE Patents [OSTI]

A method of converting a steam cooled transition to an air cooled transition in a gas turbine having a compressor in fluid communication with a combustor, a turbine section in fluid communication with the combustor, the transition disposed in a combustor shell and having a cooling circuit connecting a steam outlet and a steam inlet and wherein hot gas flows from the combustor through the transition and to the turbine section, includes forming an air outlet in the transition in fluid communication with the cooling circuit and providing for an air inlet in the transition in fluid communication with the cooling circuit.

Coslow, Billy Joe (Winter Park, FL); Whidden, Graydon Lane (Great Blue, CT)

1999-01-01T23:59:59.000Z

424

EIA - Natural Gas Publications  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30Natural Gas Glossary529 633 622 56623Primary MetalsOriginCapacityNatural Gas

425

Shale Gas Production  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S. Natural GasquestionnairesquestionnairesGasA.San JuanGas Production

426

Acidic gas capture by diamines  

DOE Patents [OSTI]

Compositions and methods related to the removal of acidic gas. In particular, the present disclosure relates to a composition and method for the removal of acidic gas from a gas mixture using a solvent comprising a diamine (e.g., piperazine) and carbon dioxide. One example of a method may involve a method for removing acidic gas comprising contacting a gas mixture having an acidic gas with a solvent, wherein the solvent comprises piperazine in an amount of from about 4 to about 20 moles/kg of water, and carbon dioxide in an amount of from about 0.3 to about 0.9 moles per mole of piperazine.

Rochelle, Gary (Austin, TX); Hilliard, Marcus (Missouri City, TX)

2011-05-10T23:59:59.000Z

427

Natural gas monthly, April 1999  

SciTech Connect (OSTI)

The Natural Gas Monthly (NGM) highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. From time to time, the NGM features articles designed to assist readers in using and interpreting natural gas information. There are two feature articles in this issue: Natural gas 1998: Issues and trends, Executive summary; and Special report: Natural gas 1998: A preliminary summary. 6 figs., 28 tabs.

NONE

1999-05-06T23:59:59.000Z

428

Natural gas monthly, July 1997  

SciTech Connect (OSTI)

The Natural Gas Monthly (NGM) highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. From time to time, the NGM features articles designed to assist readers in using and interpreting natural gas information. The feature article this month is entitled ``Intricate puzzle of oil and gas reserves growth.`` A special report is included on revisions to monthly natural gas data. 6 figs., 24 tabs.

NONE

1997-07-01T23:59:59.000Z

429

Gas Cooling Through Galaxy Formations  

E-Print Network [OSTI]

Abstract-- Gas cooling was studied in two different boxes of sizes and by simulation at same redshifts. The gas cooling is shown in four different redshifts (z=1.15, 0.5, 0.1 and 0). In the simulation the positions of the clumps of cooled gas were studied with slices of the two volumes and also the density of cooled gas of the two volumes shown in the simulation. From the process of gas cooling it is clear that this process gives different results in the two cases. Index Term- Gas Cooling, Simulation, galaxy Formation. I.

Mariwan A. Rasheed; Mohamad A. Brza

430

Natural gas monthly, October 1996  

SciTech Connect (OSTI)

The Natural Gas Monthly (NGM) is prepared in the Data Operations Branch of the Reserves and Natural Gas Division, Office of Oil and Gas, Energy Information Administration (EIA), U.S. Department of Energy (DOE). The NGM highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. From time to time, the NGM features articles designed to assist readers in using and interpreting natural gas information.

NONE

1996-10-01T23:59:59.000Z

431

Hoisting and Rigging Technical Advisory Committee Membership...  

Broader source: Energy.gov (indexed) [DOE]

Advisory Committee Membership Roster NAME ORGANIZATION E-MAIL PHONE Abramson, Doug DOE, NNSA, NA-3.6 doug.abramson@hq.doe.gov (301) 903-7328 Aponte, Xavier NNSA, Nevada Site Office...

432

Drill Rig Safety Topics of the Presentation  

E-Print Network [OSTI]

;Inspect Cooling System & Fan #12;The Most Injury Related Activity Handling Drill Pipe Tools Casing #12;Automated Loading Arms w/ Radio Remote Controls #12;Automatic Pipe Handling System w/ Tilt Out Top Head #12

433

RIGGED HILBERT SPACES FOR CHAOTIC DYNAMICAL SYSTEMS  

E-Print Network [OSTI]

1 , and O.F. Bandtlow 1;4 1 International Solvay Institutes for Physics and Chemistry CP 231, Campus

Bandtlow, Oscar

434

Hanford Hoisting and Rigging Manual - Hanford Site  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickr FlickrGuided Self-AssemblyOctober 2012FebruaryAbout Us

435

Compressed Gas Cylinder Policy  

E-Print Network [OSTI]

contained in cylinders display chemical hazards that include toxic, flammable, corrosive, pyrophoric on their side but stored in a way to prevent damage to the product label. In a free standing gas cylinder the height of the cylinder. So that the cylinder label is easily viewed. On a dry surface allowing no contact

436

Natural Gas Purchasing Options  

E-Print Network [OSTI]

As a result of economic and regulatory changes, the natural gas marketplace now offers multiple options for purchasers. The purpose of this panel is to discuss short-term purchasing options and how to take advantage of these options both to lower...

Watkins, G.

437

Gas turbine diagnostic system  

E-Print Network [OSTI]

In the given article the methods of parametric diagnostics of gas turbine based on fuzzy logic is proposed. The diagnostic map of interconnection between some parts of turbine and changes of corresponding parameters has been developed. Also we have created model to define the efficiency of the compressor using fuzzy logic algorithms.

Talgat, Shuvatov

2011-01-01T23:59:59.000Z

438

Gas-controlled dynamic vacuum insulation with gas gate  

DOE Patents [OSTI]

Disclosed is a dynamic vacuum insulation comprising sidewalls enclosing an evacuated chamber and gas control means for releasing hydrogen gas into a chamber to increase gas molecule conduction of heat across the chamber and retrieving hydrogen gas from the chamber. The gas control means includes a metal hydride that absorbs and retains hydrogen gas at cooler temperatures and releases hydrogen gas at hotter temperatures; a hydride heating means for selectively heating the metal hydride to temperatures high enough to release hydrogen gas from the metal hydride; and gate means positioned between the metal hydride and the chamber for selectively allowing hydrogen to flow or not to flow between said metal hydride and said chamber. 25 figs.

Benson, D.K.; Potter, T.F.

1994-06-07T23:59:59.000Z

439

Gas-controlled dynamic vacuum insulation with gas gate  

DOE Patents [OSTI]

Disclosed is a dynamic vacuum insulation comprising sidewalls enclosing an evacuated chamber and gas control means for releasing hydrogen gas into a chamber to increase gas molecule conduction of heat across the chamber and retrieving hydrogen gas from the chamber. The gas control means includes a metal hydride that absorbs and retains hydrogen gas at cooler temperatures and releases hydrogen gas at hotter temperatures; a hydride heating means for selectively heating the metal hydride to temperatures high enough to release hydrogen gas from the metal hydride; and gate means positioned between the metal hydride and the chamber for selectively allowing hydrogen to flow or not to flow between said metal hydride and said chamber.

Benson, David K. (Golden, CO); Potter, Thomas F. (Denver, CO)

1994-06-07T23:59:59.000Z

440

Methods of natural gas liquefaction and natural gas liquefaction plants utilizing multiple and varying gas streams  

DOE Patents [OSTI]

A method of natural gas liquefaction may include cooling a gaseous NG process stream to form a liquid NG process stream. The method may further include directing the first tail gas stream out of a plant at a first pressure and directing a second tail gas stream out of the plant at a second pressure. An additional method of natural gas liquefaction may include separating CO.sub.2 from a liquid NG process stream and processing the CO.sub.2 to provide a CO.sub.2 product stream. Another method of natural gas liquefaction may include combining a marginal gaseous NG process stream with a secondary substantially pure NG stream to provide an improved gaseous NG process stream. Additionally, a NG liquefaction plant may include a first tail gas outlet, and at least a second tail gas outlet, the at least a second tail gas outlet separate from the first tail gas outlet.

Wilding, Bruce M; Turner, Terry D

2014-12-02T23:59:59.000Z

Note: This page contains sample records for the topic "gas rig counts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Primer on gas integrated resource planning  

SciTech Connect (OSTI)

This report discusses the following topics: gas resource planning: need for IRP; gas integrated resource planning: methods and models; supply and capacity planning for gas utilities; methods for estimating gas avoided costs; economic analysis of gas utility DSM programs: benefit-cost tests; gas DSM technologies and programs; end-use fuel substitution; and financial aspects of gas demand-side management programs.

Goldman, C.; Comnes, G.A.; Busch, J.; Wiel, S. [Lawrence Berkeley Lab., CA (United States)

1993-12-01T23:59:59.000Z

442

LASER STABILIZATION FOR NEAR ZERO NO{sub x} GAS TURBINE COMBUSTION SYSTEMS  

SciTech Connect (OSTI)

Historically, the development of new industrial gas turbines has been primarily driven by the intent to achieve higher efficiency, lower operating costs and lower emissions. Higher efficiency and lower cost is obtained through higher turbine operating temperatures, while reduction in emissions is obtained by extending the lean operating limit of the combustor. However reduction in the lean stability limit of operation is limited greatly by the chemistry of the combustion process and by the occurrence of thermo-acoustic instabilities. Solar Turbines, CFD Research Corporation, and Los Alamos National Laboratory have teamed to advance the technology associated with laser-assisted ignition and flame stabilization, to a level where it could be incorporated onto a gas turbine combustor. The system being developed is expected to enhance the lean stability limit of the swirl stabilized combustion process and assist in reducing combustion oscillations. Such a system has the potential to allow operation at the ultra-lean conditions needed to achieve NO{sub x} emissions below 5 ppm without the need of exhaust treatment or catalytic technologies. The research effort was focused on analytically modeling laser-assisted flame stabilization using advanced CFD techniques, and experimentally demonstrating the technology, using a solid-state laser and low-cost durable optics. A pulsed laser beam was used to generate a plasma pool at strategic locations within the combustor flow field such that the energy from the plasma became an ignition source and helped maintain a flame at ultra lean operating conditions. The periodic plasma generation and decay was used to nullify the fluctuations in the heat release from the flame itself, thus decoupling the heat release from the combustor acoustics and effectively reducing the combustion oscillations. The program was built on an existing technology base and includes: extending LANL's existing laser stabilization experience to a sub-scale combustor rig, performing and validating CFD predictions, and ultimately conducting a full system demonstration in a multi-injector combustion system at Solar Turbines.

Vivek Khanna

2002-09-30T23:59:59.000Z

443

Retained Gas Sampling Results for the Flammable Gas Program  

SciTech Connect (OSTI)

The key phenomena of the Flammable Gas Safety Issue are generation of the gas mixture, the modes of gas retention, and the mechanisms causing release of the gas. An understanding of the mechanisms of these processes is required for final resolution of the safety issue. Central to understanding is gathering information from such sources as historical records, tank sampling data, tank process data (temperatures, ventilation rates, etc.), and laboratory evaluations conducted on tank waste samples.

J.M. Bates; L.A. Mahoney; M.E. Dahl; Z.I. Antoniak

1999-11-18T23:59:59.000Z

444

A comparison of gastrointestinal nematode egg counts, larval cultures, larval identifications and their correlation with adult worms found in calves  

E-Print Network [OSTI]

A CONPAHISON QF GASTROINTESTINAL NEJATODE FtiG COUIfTSp LARVAL CULTURES, LARVAL IDENTIFICATIONS AaiD THEIR CORREIJiTION TlITH ADULT VIORL5 FOUND IN CALVES A thea s Luis Villasenor L, ichel Submitted to the Graduate College of the Texas Mc... for their valuable counsel in the preparation of this manuscript. TAKE OF CONTENTS INTRODUCTION Page REVIEV OF LITERATURE . ~ - ~ ~ - ~ - - - - ~ ~ ~ ~ 3 Egg Counting Procedures Egg identification Factors altering egg counts Variations in nematode egg...

Villasenor Michel, Luis

1968-01-01T23:59:59.000Z

445

Correlation of habitat parameters with whistle-count densities of bobwhite (Colinus virginianus) and scaled quail (Callipepla squamata) in Texas  

E-Print Network [OSTI]

with clumps of invading brush characteristic of the Gulf Prairies and Marshes. 'p ;t Table Z. Hean habitat diversity and interspersion indices for the whistle-count transects within the 10 ecological areas in Texas. Ecological area Number of transects.... Included within this category were the numbe& of intersecting fences, shrubrows, windbreaks, powerlines, roads, and railroad right-of-ways, and whether or not these structures para', ieled the whistle-count transect. The number of edges (an abrupt...

Reid, Rob Ray

1977-01-01T23:59:59.000Z

446

Chemically reacting plumes, gas hydrate dissociation and dendrite solidification  

E-Print Network [OSTI]

II Gas hydrates Introductionto gas hydrates . . . . . . . . . . 1.127 Gas hydrate dissociation in porous media . 1.

Conroy, Devin Thomas

2008-01-01T23:59:59.000Z

447

The impact of main belt asteroids on infrared--submillimetre photometry and source counts  

E-Print Network [OSTI]

> Among the components of the infrared and submillimetre sky background, the closest layer is the thermal emission of dust particles and minor bodies in the Solar System. This contribution is especially important for current and future infrared and submillimetre space instruments --like those of Spitzer, Akari and Herschel -- and must be characterised by a reliable statistical model. > We describe the impact of the thermal emission of main belt asteroids on the 5...1000um photometry and source counts, for the current and future spaceborne and ground-based instruments, in general, as well as for specific dates and sky positions. > We used the statistical asteroid model (SAM) to calculate the positions of main belt asteroids down to a size of 1km, and calculated their infrared and submillimetre brightness using the standard thermal model. Fluctuation powers, confusion noise values and number counts were derived from the fluxes of individual asteroids. > We have constructed a large database of infrared and submillimetre fluxes for SAM asteroids with a temporal resolution of 5 days, covering the time span January 1, 2000 -- December 31, 2012. Asteroid fluctuation powers and number counts derived from this database can be obtained for a specific observation setup via our public web-interface. > Current space instruments working in the mid-infrared regime (Akari and Spitzer Space Telescopes) are affected by asteroid confusion noise in some specific areas of the sky, while the photometry of space infrared and submillimetre instruments in the near future (e.g. Herschel and Planck Space Observatories) will not be affected by asteroids. Faint main belt asteroids might also be responsible for most of the zodiacal emission fluctuations near the ecliptic.

Cs. Kiss; A. Pal; Th. G. Mueller; P. Abraham

2007-11-28T23:59:59.000Z

448

The European Large Area ISO Survey VIII: 90-micron final analysis and source counts  

E-Print Network [OSTI]

We present a re--analysis of the European Large Area ISO Survey (ELAIS) 90mum observations carried out with ISOPHOT, an instrument on board the ESA's Infrared Space Observatory (ISO). With more than 12 sq. deg., the ELAIS survey is the largest area covered by ISO in a single program and is about one order of magnitude deeper than the IRAS 100mum survey. The data analysis is presented and was mainly performed with the Phot Interactive Analysis software but using the pairwise method of Stickel et al. (2003) for signal processing from ERD (Edited Raw Data) to SCP (Signal per Chopper Plateau). The ELAIS 90mum catalogue contains 229 reliable sources with fluxes larger than 70 mJy and is available at www.blackwell-synergy.com. Number counts are presented and show an excess above the no-evolution model prediction. This confirms the strong evolution detected at shorter(15mum) and longer (170mum) wavelengths in other ISO surveys. The ELAIS counts are in agreement with previous works at 90mum and in particular with the deeper counts extracted from the Lockman hole observations. Comparison with recent evolutionary models show that the models of Franceschini et al. and Guiderdoni et al. which includes a heavily-extinguished population of galaxies give the best fit to the data. Deeper observations are nevertheless required to better discriminate between the model predictions in the far-infrared and are scheduled with the Spitzer Space Telescope which already started operating and will also be performed by ASTRO-F.

Ph. Heraudeau; S. Oliver; C. del Burgo; C. Kiss; M. Stickel; T. Mueller; M. Rowan-Robinson; A. Efstathiou; C. Surace; L. V. Toth; S. Serjeant; D. M. Alexander; A. Franceschini; D. Lemke; I. Perez-Fournon; T. Morel; J-L. Puget; D. Rigopoulou; B. Rocca-Volmerange; A. Verma

2004-10-15T23:59:59.000Z

449

Calibration of the JET neutron yield monitors using the delayed neutron counting technique  

SciTech Connect (OSTI)

The time-resolved neutron yield is routinely measured on the JET tokamak using a set of fission chambers. At present, the preferred technique is to employ activation reactions to determine the neutron fluence at a well-chosen position and to relate the measured fluence to the total neutron emission by means of neutron transport calculations. The delayed neutron counting method is a particularly convenient method of performing the activation measurement and the fission cross sections are accurately known. This paper outlines the measurement technique as used on JET.

van Belle, P.; Jarvis, O.N.; Sadler, G. (JET Joint Undertaking, Abingdon, Oxfordshire OX14 3EA (Great Britain)); de Leeuw, S.; D'Hondt, P. (C.E.N./S.C.K., B-2400 Mol (Belgium)); Pillon, M. (Associazione EURATOM-ENEA, CRE Frascati (Italy))

1990-10-01T23:59:59.000Z

450

Standard test method for determination of technetium-99 in uranium hexafluoride by liquid scintillation counting  

E-Print Network [OSTI]

1.1 This test method is a quantitative method used to determine technetium-99 (99Tc) in uranium hexafluoride (UF6) by liquid scintillation counting. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

American Society for Testing and Materials. Philadelphia

2008-01-01T23:59:59.000Z

451

Lindblad equation approach for the full counting statistics of work and heat in driven quantum systems  

E-Print Network [OSTI]

We formulate the general approach based on the Lindblad equation to calculate the full counting statistics of work and heat produced by driven quantum systems weakly coupled with a Markovian thermal bath. The approach can be applied to a wide class of dissipative quantum systems driven by an arbitrary force protocol. We show the validity of general fluctuation relations and consider several generic examples. The possibilities of using calorimetric measurements to test the presence of coherence and entanglement in the open quantum systems are discussed.

Mihail Silaev; Tero T. Heikkilä; Pauli Virtanen

2014-06-25T23:59:59.000Z

452

A system for the determination of uranium in meteorites by delayed -neutron counting  

E-Print Network [OSTI]

by Becquerel during his search for the newly discovered "x-rays" (found by Roentgen in 1895) in a variety of phosphorescent minerals. In his pro- cedure Becquerel exposed the minerals to light, wrapped them in black paper to exc!ude all additional light... tivity. 16. F[RHE 2, Side (I) and Top (II) Views of Counting Assenhly 17. Aluminum was chosen as the detector cathode material because of its lower neutron cross section as compared to the other avails'nle material which was brass (Al: 0. 23 b; Cu...

Riley, John Edward

2012-06-07T23:59:59.000Z

453

Effects, determination, and correction of count rate nonlinearity in multi-channel analog electron detectors  

SciTech Connect (OSTI)

Detector counting rate nonlinearity, though a known problem, is commonly ignored in the analysis of angle resolved photoemission spectroscopy where modern multichannel electron detection schemes using analog intensity scales are used. We focus on a nearly ubiquitous “inverse saturation” nonlinearity that makes the spectra falsely sharp and beautiful. These artificially enhanced spectra limit accurate quantitative analysis of the data, leading to mistaken spectral weights, Fermi energies, and peak widths. We present a method to rapidly detect and correct for this nonlinearity. This algorithm could be applicable for a wide range of nonlinear systems, beyond photoemission spectroscopy.

Reber, T. J.; Plumb, N. C.; Waugh, J. A.; Dessau, D. S. [Department of Physics, University of Colorado, Boulder, Colorado 80309-0390 (United States)] [Department of Physics, University of Colorado, Boulder, Colorado 80309-0390 (United States)

2014-04-15T23:59:59.000Z

454

Noise Equivalent Counts Based Emission Image Reconstruction Algorithm of Tomographic Gamma Scanning  

E-Print Network [OSTI]

Tomographic Gamma Scanning (TGS) is a technique used to assay the nuclide distribution and radioactivity in nuclear waste drums. Both transmission and emission scans are performed in TGS and the transmission image is used for the attenuation correction in emission reconstructions. The error of the transmission image, which is not considered by the existing reconstruction algorithms, negatively affects the final results. An emission reconstruction method based on Noise Equivalent Counts (NEC) is presented. Noises from the attenuation image are concentrated to the projection data to apply the NEC Maximum-Likelihood Expectation-Maximization algorithm. Experiments are performed to verify the effectiveness of the proposed method.

Ke Wang; Zheng Li; Wei Feng; Dong Han

2014-04-17T23:59:59.000Z

455

Detection of coherent superpositions of phase states by full counting statistics in a Bose Josephson junction  

SciTech Connect (OSTI)

We study a Bose Josephson junction realized with a double-well potential. We propose a strategy to observe the coherent superpositions of phase states occurring during the time evolution after a sudden rise of the barrier separating the two wells. We show that their phase content can be obtained by the full counting statistics of the spin-boson operators characterizing the junction, which could be mapped out by repeated measurements of the population imbalance after rotation of the state. This measurement can distinguish between coherent superpositions and incoherent mixtures, and can be used for a two-dimensional tomographic reconstruction of the phase content of the state.

Ferrini, G.; Minguzzi, A.; Hekking, F. W. J. [Laboratoire de Physique et Modelisation des Milieux Condenses, Universite Joseph Fourier-CNRS, BP 166, 38042 Grenoble (France)

2009-10-15T23:59:59.000Z

456

Gas Utility Pipeline Tax (Texas)  

Broader source: Energy.gov [DOE]

All gas utilities, including any entity that owns, manages, operates, leases, or controls a pipeline for the purpose of transporting natural gas in the state for sale or compensation, as well as...

457

Gas Code of Conduct (Connecticut)  

Broader source: Energy.gov [DOE]

The Gas Code of Conduct sets forth the standard of conduct for transactions, direct or indirect, between gas companies and their affiliates. The purpose of these regulations is to promote...

458

Natural Gas Exports from Iran  

Reports and Publications (EIA)

This assessment of the natural gas sector in Iran, with a focus on Iran’s natural gas exports, was prepared pursuant to section 505 (a) of the Iran Threat Reduction and Syria Human Rights Act of 2012 (Public Law No: 112-158). As requested, it includes: (1) an assessment of exports of natural gas from Iran; (2) an identification of the countries that purchase the most natural gas from Iran; (3) an assessment of alternative supplies of natural gas available to those countries; (4) an assessment of the impact a reduction in exports of natural gas from Iran would have on global natural gas supplies and the price of natural gas, especially in countries identified under number (2); and (5) such other information as the Administrator considers appropriate.

2012-01-01T23:59:59.000Z

459

Regulation of Natural Gas (Texas)  

Broader source: Energy.gov [DOE]

This legislation provides for the protection of public and private interests with regards to natural gas production, prohibits waste, and compels ratable production to enable owners of gas in a...

460

Citizens Gas- Commercial Efficiency Rebates  

Broader source: Energy.gov [DOE]

Citizens Gas of Indiana offers rebates to commercial customers for the installation of several types of efficient natural gas appliances, as well as certain equipment upgrades and tune-up services....

Note: This page contains sample records for the topic "gas rig counts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Minimum Gas Service Standards (Ohio)  

Broader source: Energy.gov [DOE]

Natural gas companies in Ohio are required to follow the Minimum Gas Service Standards, which are set and enforced by the Public Utilities Commission of Ohio. These rules are found in chapter 4901...

462

Oil and Gas Conservation (Montana)  

Broader source: Energy.gov [DOE]

Parts 1 and 2 of this chapter contain a broad range of regulations pertaining to oil and gas conservation, including requirements for the regulation of oil and gas exploration and extraction by the...

463

Gas Water Heater Energy Losses  

E-Print Network [OSTI]

residential gas-fired storage water heater was modeled underin a typical residential storage water heater that meets thereplace a gas-fired storage water heater with a conventional

Biermayer, Peter

2012-01-01T23:59:59.000Z

464

Natural Gas Supply Vulnerability in Europe.  

E-Print Network [OSTI]

??Demand for natural gas has been increasing steadily the past few years. Most European countries depend heavily on natural gas imports due to insufficient gas… (more)

Gungor, Bekir

2013-01-01T23:59:59.000Z

465

Natural Gas Reforming | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Hydrogen Production Natural Gas Reforming Natural Gas Reforming Photo of Petroleum Refinery Natural gas reforming is an advanced and mature production process that builds upon...

466

Natural Gas and Hydrogen Infrastructure Opportunities Workshop...  

Broader source: Energy.gov (indexed) [DOE]

Natural Gas and Hydrogen Infrastructure Opportunities Workshop Agenda Natural Gas and Hydrogen Infrastructure Opportunities Workshop Agenda Agenda for the Natural Gas and Hydrogen...

467

Gas sensor incorporating a porous framework  

DOE Patents [OSTI]

The disclosure provides sensor for gas sensing including CO.sub.2 gas sensors comprising a porous framework sensing area for binding an analyte gas.

Yaghi, Omar M; Czaja, Alexander U; Wang, Bo; Galatsis, Kosmas; Wang, Kang L; Furukawa, Hiroyasu

2014-05-27T23:59:59.000Z

468

Gas sensor incorporating a porous framework  

SciTech Connect (OSTI)

The disclosure provides sensor for gas sensing including CO.sub.2 gas sensors comprising a porous framework sensing area for binding an analyte gas.

Yaghi, Omar M.; Czaja, Alexander U.; Wang, Bo; Furukawa, Hiroyasu; Galatsis, Kosmas; Wang, Kang L.

2013-07-09T23:59:59.000Z

469

Molecular Gas in Early-type Galaxies  

E-Print Network [OSTI]

toward the center (first seen in the molecular gas in A+3.4 Molecular Gas Mass . . . . . . .of the molecular gas . . . . . . . . . . 2.4.3 Mass of

Alatalo, Katherine Anne

2012-01-01T23:59:59.000Z

470

Report: Natural Gas Infrastructure Implications of Increased...  

Energy Savers [EERE]

interstate natural gas pipeline transmission system across a range of future natural gas demand scenarios that drive increased electric power sector natural gas use. To perform...

471

Marine electromagnetic methods for gas hydrate characterization  

E-Print Network [OSTI]

1.2 Gas Hydrates . . . . . . . .1.2.1 Distribution of Gas Hydrates . . . . . . . . . . .1.2.2 Importance of Gas Hydrates . . . . .

Weitemeyer, Karen Andrea

2008-01-01T23:59:59.000Z

472

Marine Electromagnetic Methods for Gas Hydrate Characterization  

E-Print Network [OSTI]

1.2 Gas Hydrates . . . . . . . .1.2.1 Distribution of Gas Hydrates . . . . . . . . . . .1.2.2 Importance of Gas Hydrates . . . . .

Weitemeyer, Karen A

2008-01-01T23:59:59.000Z

473

Roadmap for Development of Natural Gas Vehicle Fueling Infrastructructure and Analysis of Vehicular Natural Gas Consumption by Niche Sector  

SciTech Connect (OSTI)

Vehicular natural gas consumption is on the rise, totaling nearly 200 million GGEs in 2005, despite declines in total NGV inventory in recent years. This may be attributed to greater deployment of higher fuel use medium- and heavy-duty NGVs as compared to the low fuel use of the natural gas-powered LDVs that exited the market through attrition, many of which were bi-fuel. Natural gas station counts are down to about 1100 from their peak of about 1300. Many of the stations that closed were under-utilized or not used at all while most new stations were developed with greater attention to critical business fundamentals such as site selection, projected customer counts, peak and off-peak fueling capacity needs and total station throughput. Essentially, the nation's NGV fueling infrastructure has been--and will continue--going through a 'market correction'. While current economic fundamentals have shortened payback and improved life-cycle savings for investment in NGVs and fueling infrastructure, a combination of grants and other financial incentives will still be needed to overcome general fleet market inertia to maintain status quo. Also imperative to the market's adoption of NGVs and other alternative fueled vehicle and fueling technologies is a clear statement of long-term federal government commitment to diversifying our nation's transportation fuel use portfolio and, more specifically, the role of natural gas in that policy. Based on the current NGV market there, and the continued promulgation of clean air and transportation policies, the Western Region is--and will continue to be--the dominant region for vehicular natural gas use and growth. In other regions, especially the Northeast, Mid-Atlantic states and Texas, increased awareness and attention to air quality and energy security concerns by the public and - more important, elected officials--are spurring policies and programs that facilitate deployment of NGVs and fueling infrastructure. Because of their high per-vehicle fuel use, central fueling and sensitivity to fuel costs, fleets will continue to be the primary target for NGV deployment and station development efforts. The transit sector is projected to continue to account for the greatest vehicular natural gas use and for new volume growth. New tax incentives and improved life-cycle economics also create opportunities to deploy additional vehicles and install related vehicular natural gas fueling infrastructure in the refuse, airport and short-haul sectors. Focusing on fleets generates the highest vehicular natural gas throughout but it doesn't necessarily facilitate public fueling infrastructure because, generally, fleet operators prefer not to allow public access due to liability concerns and revenue and tax administrative burdens. While there are ways to overcome this reluctance, including ''outside the fence'' retail dispensers and/or co-location of public and ''anchor'' fleet dispensing capability at a mutually convenient existing or new retail location, each has challenges that complicate an already complex business transaction. Partnering with independent retail fuel station companies, especially operators of large ''truck stops'' on the major interstates, to include natural gas at their facilities may build public fueling infrastructure and demand enough to entice the major oil companies to once again engage. Garnering national mass media coverage of success in California and Utah where vehicular natural gas fueling infrastructure is more established will help pave the way for similar consumer market growth and inclusion of public accessibility at stations in other regions. There isn't one ''right'' business model for growing the nation's NGV inventory and fueling infrastructure. Different types of station development and ownership-operation strategies will continue to be warranted for different customers in different markets. Factors affecting NGV deployment and station development include: regional air quality compliance status and the state and/or local political climate regarding mandates and/or in

Stephen C. Yborra

2007-04-30T23:59:59.000Z

474

Gas Storage Technology Consortium  

SciTech Connect (OSTI)

The EMS Energy Institute at The Pennsylvania State University (Penn State) has managed the Gas Storage Technology Consortium (GSTC) since its inception in 2003. The GSTC infrastructure provided a means to accomplish industry-driven research and development designed to enhance the operational flexibility and deliverability of the nation's gas storage system, and provide a cost-effective, safe, and reliable supply of natural gas to meet domestic demand. The GSTC received base funding from the U.S. Department of Energy's (DOE) National Energy Technology Laboratory (NETL) Oil & Natural Gas Supply Program. The GSTC base funds were highly leveraged with industry funding for individual projects. Since its inception, the GSTC has engaged 67 members. The GSTC membership base was diverse, coming from 19 states, the District of Columbia, and Canada. The membership was comprised of natural gas storage field operators, service companies, industry consultants, industry trade organizations, and academia. The GSTC organized and hosted a total of 18 meetings since 2003. Of these, 8 meetings were held to review, discuss, and select proposals submitted for funding consideration. The GSTC reviewed a total of 75 proposals and committed co-funding to support 31 industry-driven projects. The GSTC committed co-funding to 41.3% of the proposals that it received and reviewed. The 31 projects had a total project value of $6,203,071 of which the GSTC committed $3,205,978 in co-funding. The committed GSTC project funding represented an average program cost share of 51.7%. Project applicants provided an average program cost share of 48.3%. In addition to the GSTC co-funding, the consortium provided the domestic natural gas storage industry with a technology transfer and outreach infrastructure. The technology transfer and outreach were conducted by having project mentoring teams and a GSTC website, and by working closely with the Pipeline Research Council International (PRCI) to jointly host technology transfer meetings and occasional field excursions. A total of 15 technology transfer/strategic planning workshops were held.

Joel Morrison; Elizabeth Wood; Barbara Robuck

2010-09-30T23:59:59.000Z

475

Natural gas monthly, June 1997  

SciTech Connect (OSTI)

The Natural Gas Monthly (NGM) highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. From time to time, the NGM features articles designed to assist readers in using and interpreting natural gas information. 6 figs., 24 tabs.

NONE

1997-06-01T23:59:59.000Z

476

Natural gas monthly, November 1993  

SciTech Connect (OSTI)

The Natural Gas Monthly (NGM) highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground state data are also reported. From time to time, the NGM features articles designed to assist readers in using and interpreting natural gas information.

Not Available

1993-11-29T23:59:59.000Z

477

Natural gas monthly: December 1993  

SciTech Connect (OSTI)

The Natural Gas Monthly (NGM) highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. Articles are included which are designed to assist readers in using and interpreting natural gas information.

Not Available

1993-12-01T23:59:59.000Z

478

Natural gas monthly, June 1999  

SciTech Connect (OSTI)

The Natural Gas Monthly (NGM) highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. From time to time, the NGM features articles designed to assist readers in using and interpreting natural gas information. 6 figs., 25 tabs.

NONE

1999-06-01T23:59:59.000Z

479

Natural gas monthly, July 1998  

SciTech Connect (OSTI)

The Natural Gas Monthly (NGM) highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. From time to time, the NGM features articles designed to assist readers in using and interpreting natural gas information. 6 figs., 25 tabs.

NONE

1998-07-01T23:59:59.000Z

480

Natural gas monthly, April 1995  

SciTech Connect (OSTI)

The Natural Gas Monthly highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. From time to time, the NGM features articles designed to assist readers in using and interpreting natural gas information. 6 figs., 31 tabs.

NONE

1995-04-27T23:59:59.000Z

Note: This page contains sample records for the topic "gas rig counts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Natural gas monthly, October 1998  

SciTech Connect (OSTI)

The Natural Gas Monthly (NGM) highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. From time to time, the NGM features articles designed to assist readers in using and interpreting natural gas information. 6 figs., 27 tabs.

NONE

1998-10-01T23:59:59.000Z

482

Natural Gas Monthly, March 1996  

SciTech Connect (OSTI)

The Natural Gas Monthly (NGM) highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. From time to time, the NGM features articles designed to assist readers in using and interpreting natural gas information.

NONE

1996-03-25T23:59:59.000Z

483

Natural gas monthly, June 1998  

SciTech Connect (OSTI)

The Natural Gas Monthly (NGM) highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. From time to time, the NGM features articles designed to assist readers in using and interpreting natural gas information. 6 figs., 27 tabs.

NONE

1998-06-01T23:59:59.000Z

484

Natural gas monthly, September 1998  

SciTech Connect (OSTI)

The National Gas Monthly (NGM) highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. From time to time, the NGM features articles designed to assist readers in using and interpreting natural gas information. 6 figs., 27 tabs.

NONE

1998-09-01T23:59:59.000Z

485

Natural gas monthly, May 1999  

SciTech Connect (OSTI)

The Natural Gas Monthly (NGM) highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. From time to time the NGM features articles designed to assist readers in using and interpreting natural gas information. 6 figs., 27 tabs.

NONE

1999-05-01T23:59:59.000Z

486

Oil and Gas Air Heaters  

E-Print Network [OSTI]

, the relation of hot-air temperature, oil or gas consumption and fresh airflow is determined based on energy equilibrium....

Kou, G.; Wang, H.; Zhou, J.

2006-01-01T23:59:59.000Z

487

LIQUEFIED NATURAL GAS IN CALIFORNIA  

E-Print Network [OSTI]

CALIFORNIA ENERGY COMMISSION LIQUEFIED NATURAL GAS IN CALIFORNIA: HISTORY, RISKS, AND SITING Tyler Contributors Dave Maul Manager NATURAL GAS & SPECIAL PROJECTS OFFICE Terrence O'Brien, Deputy Commissioner and Leader of the Governor's Natural Gas Working Group #12;This paper was prepared as the result

488

Preparation of ammonia synthesis gas  

SciTech Connect (OSTI)

Ammonia synthesis gas having excess nitrogen is produced in a reactor-exchanger primary reformer followed by an autothermal secondary reformer wherein process air for the latter is preheated by heat exchange with gas turbine exhaust and the primary reformer is heated by synthesis gas from the secondary reformer.

Shires, P.J.; van Dijk, C.P.; Cassata, J.R.; Mandelik, B.G.

1984-10-30T23:59:59.000Z

489

Gas Slow Control System Specifications  

E-Print Network [OSTI]

AMS-02 TRD Gas Slow Control System Specifications v 4.2 26-06-2006 A. Bartoloni, B. Borgia, F. Bucci, F. R. Spada INFN Sezione di Roma 1- Roma, Italy #12;2/45 #12;3/45 1. ABSTRACT 5 2. GAS SYSTEM FUNCTIONAL DESCRIPTION 5 3. GAS CONTROL SYSTEM 8 4. CONTROL SYSTEM COMPONENTS 12 a. Universal Control System

Roma "La Sapienza", Università di

490

Gas Exchange, Partial Pressure Gradients,  

E-Print Network [OSTI]

Gas Exchange, Partial Pressure Gradients, and the Oxygen Window Johnny E. Brian, Jr., M of circulatory and gas transport physiology, and the best place to start is with normobaric physiology. LIFE affect the precise gas exchange occurring in individual areas of the lungs and body tissues. To make

Riba Sagarra, Jaume

491

Natural gas monthly, January 1999  

SciTech Connect (OSTI)

The Natural Gas Monthly (NGM) highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. 6 figs., 28 tabs.

NONE

1999-02-01T23:59:59.000Z

492

Natural gas monthly, November 1998  

SciTech Connect (OSTI)

The Natural Gas Monthly (NGM) highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. 6 figs., 27 tabs.

NONE

1998-11-01T23:59:59.000Z

493

Natural gas monthly, February 1999  

SciTech Connect (OSTI)

The Natural Gas Monthly (NGM) highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. 6 figs., 28 tabs.

NONE

1999-02-01T23:59:59.000Z

494

Automated gas chromatography  

DOE Patents [OSTI]

An apparatus and process for the continuous, near real-time monitoring of low-level concentrations of organic compounds in a liquid, and, more particularly, a water stream. A small liquid volume of flow from a liquid process stream containing organic compounds is diverted by an automated process to a heated vaporization capillary where the liquid volume is vaporized to a gas that flows to an automated gas chromatograph separation column to chromatographically separate the organic compounds. Organic compounds are detected and the information transmitted to a control system for use in process control. Concentrations of organic compounds less than one part per million are detected in less than one minute. 7 figs.

Mowry, C.D.; Blair, D.S.; Rodacy, P.J.; Reber, S.D.

1999-07-13T23:59:59.000Z

495

Gas turbine sealing apparatus  

DOE Patents [OSTI]

A sealing apparatus in a gas turbine. The sealing apparatus includes a seal housing apparatus coupled to a disc/rotor assembly so as to be rotatable therewith during operation of the gas turbine. The seal housing apparatus comprises a base member, a first leg portion, a second leg portion, and spanning structure. The base member extends generally axially between forward and aft rows of rotatable blades and is positioned adjacent to a row of stationary vanes. The first leg portion extends radially inwardly from the base member and is coupled to the disc/rotor assembly. The second leg portion is axially spaced from the first leg portion, extends radially inwardly from the base member, and is coupled to the disc/rotor assembly. The spanning structure extends between and is rigidly coupled to each of the base member, the first leg portion, and the second leg portion.

Marra, John Joseph; Wessell, Brian J.; Liang, George

2013-03-05T23:59:59.000Z

496

Gas turbine premixing systems  

DOE Patents [OSTI]

Methods and systems are provided for premixing combustion fuel and air within gas turbines. In one embodiment, a combustor includes an upstream mixing panel configured to direct compressed air and combustion fuel through premixing zone to form a fuel-air mixture. The combustor includes a downstream mixing panel configured to mix additional combustion fuel with the fule-air mixture to form a combustion mixture.

Kraemer, Gilbert Otto; Varatharajan, Balachandar; Evulet, Andrei Tristan; Yilmaz, Ertan; Lacy, Benjamin Paul

2013-12-31T23:59:59.000Z

497

Gas filled panel insulation  

DOE Patents [OSTI]

A structural or flexible highly insulative panel which may be translucent, is formed from multi-layer polymeric material in the form of an envelope surrounding a baffle. The baffle is designed so as to minimize heat transfer across the panel, by using material which forms substantially closed spaces to suppress convection of the low conductivity gas fill. At least a portion of the baffle carries a low emissivity surface for suppression of infrared radiation. 18 figures.

Griffith, B.T.; Arasteh, D.K.; Selkowitz, S.E.

1993-12-14T23:59:59.000Z

498

Gas-driven microturbine  

SciTech Connect (OSTI)

This paper describes an invention which relates to microtechnology and the fabrication process for developing microelectrical systems. It describes a means for fabricating a gas-driven microturbine capable of providing autonomous propulsion in which the rapidly moving gases are directed through a micromachined turbine to power devices by direct linkage or turbo-electric generators components in a domain ranging from tenths of micrometers to thousands of micrometers.

Sniegowski, J.J.; Rodgers, M.S.; McWhorter, P.J.; Aeschliman, D.P.; Miller, W.M.

1996-06-27T23:59:59.000Z

499

Chaplygin electron gas model  

E-Print Network [OSTI]

We provide a new electromagnetic mass model admitting Chaplygin gas equation of state. We investigate three specializations, the first characterized by a vanishing effective pressure, the second provided with a constant effective density and the third is described by a constant effective pressure. For these specializations two particular cases are discussed. In addition, for specialization I, case I we found isotropic coordinate as well as Kretschmann scalar, and for specialization III, case II two special scenarios have been studied.

I. Radinschi; F. Rahaman; M. Kalam; K. Chakraborty

2008-11-01T23:59:59.000Z

500

Gas stream cleanup  

SciTech Connect (OSTI)

This report describes the current status and recent accomplishments of gas stream cleanup (GSCU) projects sponsored by the Morgantown Energy Technology Center (METC) of the US Department of Energy (DOE). The primary goal of the Gas Stream Cleanup Program is to develop contaminant control strategies that meet environmental regulations and protect equipment in advanced coal conversion systems. Contaminant control systems are being developed for integration into seven advanced coal conversion processes: Pressurized fludized-bed combustion (PFBC), Direct coal-fueled turbine (DCFT), Intergrated gasification combined-cycle (IGCC), Gasification/molten carbonate fuel cell (MCFC), Gasification/solid oxide fuel cell (SOFC), Coal-fueled diesel (CFD), and Mild gasification (MG). These advanced coal conversion systems present a significant challenge for development of contaminant control systems because they generate multi-contaminant gas streams at high-pressures and high temperatures. Each of the seven advanced coal conversion systems incorporates distinct contaminant control strategies because each has different contaminant tolerance limits and operating conditions. 59 refs., 17 figs., 5 tabs.

Bossart, S.J.; Cicero, D.C.; Zeh, C.M.; Bedick, R.C.

1990-08-01T23:59:59.000Z