Powered by Deep Web Technologies
Note: This page contains sample records for the topic "gas revolution technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Review: Structuring an Energy Technology Revolution  

E-Print Network (OSTI)

Structuring an Energy Technology Revolution By Charles WeissB. Structuring an Energy Technology Revolution. Cambridge,increases in spending on energy technology and innovation,

Kunnas, Jan

2010-01-01T23:59:59.000Z

2

Revolution Now: The Future Arrives for Four Clean Energy Technologies |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Revolution Now: The Future Arrives for Four Clean Energy Revolution Now: The Future Arrives for Four Clean Energy Technologies Revolution Now: The Future Arrives for Four Clean Energy Technologies This report focuses on four technology revolutions that are here today. In the last five years they have achieved dramatic reductions in cost and this has been accompanied by a surge in consumer, industrial and commercial deployment. Although these four technologies still represent a small percentage of their total market (e.g. electricity, cars and lighting), they are growing rapidly. The four key technologies this report focuses on are: Onshore wind power Polysilicon photovoltaic modules LED lighting Electric vehicles Editor's note: The original report has been updated to fix inaccuracies in some graph labels. Revolution Now -- The Future Arrives for Four Clean Energy Technologies.pdf

3

Revolution Now: The Future Arrives for Four Clean Energy Technologies |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Revolution Now: The Future Arrives for Four Clean Energy Revolution Now: The Future Arrives for Four Clean Energy Technologies Revolution Now: The Future Arrives for Four Clean Energy Technologies This report focuses on four technology revolutions that are here today. In the last five years they have achieved dramatic reductions in cost and this has been accompanied by a surge in consumer, industrial and commercial deployment. Although these four technologies still represent a small percentage of their total market (e.g. electricity, cars and lighting), they are growing rapidly. The four key technologies this report focuses on are: Onshore wind power Polysilicon photovoltaic modules LED lighting Electric vehicles Editor's note: The original report has been updated to fix inaccuracies in some graph labels. Revolution Now -- The Future Arrives for Four Clean Energy Technologies.pdf

4

Solar Photovoltaics Research and Technology: The Revolution ...  

Science Conference Proceedings (OSTI)

Moreover, technology progress and ownership for next-generation solar PV mandates a ... Dislocations in Si-Doped LEC GaAs Revisited: A Spectrum Image

5

Transportation Revolution  

NLE Websites -- All DOE Office Websites (Extended Search)

To transform the vehicle sector, the U.S. auto manufacturing industry is actively developing new technologies and products. This transportation revolution will also affect...

6

Coming revolution in world oil markets. [Abetted by conservation, fuel substitution, and better technologies  

SciTech Connect

Dr. Singer feels that a revolution will take place in the world oil market provided government does not enact counterproductive policies, but stands aside to let market forces achieve their inevitable results. He observes that by the end of this decade, and certainly in the 1990s, the free world may require less than half of the oil it uses today - some 20 million barrels per day (mbd) instead of 50 mbd. However, some 75% of this oil, instead of the current 25%, will be refined into gasoline and other motor fuels, while natural gas, nuclear energy and coal in different forms will substitute for most of the fuel oil to produce heat and steam - generally at much lower cost. Oil has become too expensive to burn, and a major adjustment in world-wide use patterns is overdue. Three factors will bring about these dramatic changes: First, new coal technologies: they make it convenient to replace heavy fuel oil in existing oil-fired boilers. Second, advances in refinery technology: they can produce more light products, gasoline and motor fuels, and less heavy fuel oil from a barrel of crude oil. Third, and above all, the laws of economics: higher oil prices, by themselves, encourage conservation and substitution. In addition, large price differentials between higher-quality light crudes and heavy crudes that normally yield less gasoline put a significant premium on refinery upgrading. And wholesale prices for gasoline are greater and are rising faster than those of residual fuel oil. Squeezing out more gasoline can increase the value of a barrel of crude substantially. Dr. Singer notes that the coming revolution is not generally recognized because many of the demand and supply trends are just emerging. He proceeds to discuss the staggering consequences of such a revolution.

Singer, S.F.

1981-02-04T23:59:59.000Z

7

Revolution Now  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Revolution Now Revolution Now The Future Arrives for Four Clean Energy Technologies September 17, 2013 Lead author Dr. Levi Tillemann, Special Advisor for Policy and International Affairs Contributors Fredric Beck, DOE Wind Technology Program Dr. James Brodrick, DOE Solid-State Lighting Program Dr. Austin Brown, DOE National Renewable Energy Laboratory David Feldman, DOE National Renewable Energy Laboratory Tien Nguyen, DOE Fuel Cells Technology Office Jacob Ward, DOE Vehicles Technology Program Gaining Force ................................................................................................................................................ 1 U.S. Land-Based Wind Power ........................................................................................................................ 2

8

Gas utilization technologies  

SciTech Connect

One of the constant challenges facing the research community is the identification of technology needs 5 to 15 years from now. A look back into history indicates that the forces driving natural gas research have changed from decade to decade. In the 1970s research was driven by concerns for adequate supply; in the 1980s research was aimed at creating new markets for natural gas. What then are the driving forces for the 1990s? Recent reports from the natural gas industry have helped define a new direction driven primarily by market demand for natural gas. A study prepared by the Interstate Natural Gas Association of America Foundation entitled ``Survey of Natural Research, Development, and Demonstration RD&D Priorities`` indicated that in the 1990s the highest research priority should be for natural gas utilization and that technology development efforts should not only address efficiency and cost, but environmental and regulatory issues as well. This study and others, such as the report by the American Gas Association (A.G.A.) entitled ``Strategic Vision for Natural Gas Through the Year 2000,`` clearly identify the market sectors driving today`s technology development needs. The biggest driver is the power generation market followed by the industrial, transportation, appliance, and gas cooling markets. This is best illustrated by the GRI 1994 Baseline Projection on market growth in various sectors between the year 1992 and 2010. This paper highlights some of the recent technology developments in each one of these sectors.

Biljetina, R.

1994-09-01T23:59:59.000Z

9

Gas Storage Technology Consortium  

Science Conference Proceedings (OSTI)

Gas storage is a critical element in the natural gas industry. Producers, transmission and distribution companies, marketers, and end users all benefit directly from the load balancing function of storage. The unbundling process has fundamentally changed the way storage is used and valued. As an unbundled service, the value of storage is being recovered at rates that reflect its value. Moreover, the marketplace has differentiated between various types of storage services, and has increasingly rewarded flexibility, safety, and reliability. The size of the natural gas market has increased and is projected to continue to increase towards 30 trillion cubic feet (TCF) over the next 10 to 15 years. Much of this increase is projected to come from electric generation, particularly peaking units. Gas storage, particularly the flexible services that are most suited to electric loads, is critical in meeting the needs of these new markets. In order to address the gas storage needs of the natural gas industry, an industry-driven consortium was created-the Gas Storage Technology Consortium (GSTC). The objective of the GSTC is to provide a means to accomplish industry-driven research and development designed to enhance operational flexibility and deliverability of the Nation's gas storage system, and provide a cost effective, safe, and reliable supply of natural gas to meet domestic demand. This report addresses the activities for the quarterly period of July 1, 2006 to September 30, 2006. Key activities during this time period include: {lg_bullet} Subaward contracts for all 2006 GSTC projects completed; {lg_bullet} Implement a formal project mentoring process by a mentor team; {lg_bullet} Upcoming Technology Transfer meetings: {sm_bullet} Finalize agenda for the American Gas Association Fall Underground Storage Committee/GSTC Technology Transfer Meeting in San Francisco, CA. on October 4, 2006; {sm_bullet} Identify projects and finalize agenda for the Fall GSTC Technology Transfer Meeting, Pittsburgh, PA on November 8, 2006; {lg_bullet} Draft and compile an electronic newsletter, the GSTC Insider; and {lg_bullet} New members update.

Joel L. Morrison; Sharon L. Elder

2006-09-30T23:59:59.000Z

10

Gas Storage Technology Consortium  

Science Conference Proceedings (OSTI)

Gas storage is a critical element in the natural gas industry. Producers, transmission and distribution companies, marketers, and end users all benefit directly from the load balancing function of storage. The unbundling process has fundamentally changed the way storage is used and valued. As an unbundled service, the value of storage is being recovered at rates that reflect its value. Moreover, the marketplace has differentiated between various types of storage services, and has increasingly rewarded flexibility, safety, and reliability. The size of the natural gas market has increased and is projected to continue to increase towards 30 trillion cubic feet (TCF) over the next 10 to 15 years. Much of this increase is projected to come from electric generation, particularly peaking units. Gas storage, particularly the flexible services that are most suited to electric loads, is critical in meeting the needs of these new markets. In order to address the gas storage needs of the natural gas industry, an industry driven consortium was created--the Gas Storage Technology Consortium (GSTC). The objective of the GSTC is to provide a means to accomplish industry-driven research and development designed to enhance operational flexibility and deliverability of the Nation's gas storage system, and provide a cost effective, safe, and reliable supply of natural gas to meet domestic demand. This report addresses the activities for the quarterly period of April 1, 2005 through June 30, 2005. During this time period efforts were directed toward (1) GSTC administration changes, (2) participating in the American Gas Association Operations Conference and Biennial Exhibition, (3) issuing a Request for Proposals (RFP) for proposal solicitation for funding, and (4) organizing the proposal selection meeting.

Joel Morrison

2005-09-14T23:59:59.000Z

11

Gas Storage Technology Consortium  

Science Conference Proceedings (OSTI)

The EMS Energy Institute at The Pennsylvania State University (Penn State) has managed the Gas Storage Technology Consortium (GSTC) since its inception in 2003. The GSTC infrastructure provided a means to accomplish industry-driven research and development designed to enhance the operational flexibility and deliverability of the nation's gas storage system, and provide a cost-effective, safe, and reliable supply of natural gas to meet domestic demand. The GSTC received base funding from the U.S. Department of Energy's (DOE) National Energy Technology Laboratory (NETL) Oil & Natural Gas Supply Program. The GSTC base funds were highly leveraged with industry funding for individual projects. Since its inception, the GSTC has engaged 67 members. The GSTC membership base was diverse, coming from 19 states, the District of Columbia, and Canada. The membership was comprised of natural gas storage field operators, service companies, industry consultants, industry trade organizations, and academia. The GSTC organized and hosted a total of 18 meetings since 2003. Of these, 8 meetings were held to review, discuss, and select proposals submitted for funding consideration. The GSTC reviewed a total of 75 proposals and committed co-funding to support 31 industry-driven projects. The GSTC committed co-funding to 41.3% of the proposals that it received and reviewed. The 31 projects had a total project value of $6,203,071 of which the GSTC committed $3,205,978 in co-funding. The committed GSTC project funding represented an average program cost share of 51.7%. Project applicants provided an average program cost share of 48.3%. In addition to the GSTC co-funding, the consortium provided the domestic natural gas storage industry with a technology transfer and outreach infrastructure. The technology transfer and outreach were conducted by having project mentoring teams and a GSTC website, and by working closely with the Pipeline Research Council International (PRCI) to jointly host technology transfer meetings and occasional field excursions. A total of 15 technology transfer/strategic planning workshops were held.

Joel Morrison; Elizabeth Wood; Barbara Robuck

2010-09-30T23:59:59.000Z

12

Gas Storage Technology Consortium  

Science Conference Proceedings (OSTI)

Gas storage is a critical element in the natural gas industry. Producers, transmission and distribution companies, marketers, and end users all benefit directly from the load balancing function of storage. The unbundling process has fundamentally changed the way storage is used and valued. As an unbundled service, the value of storage is being recovered at rates that reflect its value. Moreover, the marketplace has differentiated between various types of storage services, and has increasingly rewarded flexibility, safety, and reliability. The size of the natural gas market has increased and is projected to continue to increase towards 30 trillion cubic feet (TCF) over the next 10 to 15 years. Much of this increase is projected to come from electric generation, particularly peaking units. Gas storage, particularly the flexible services that are most suited to electric loads, is critical in meeting the needs of these new markets. In order to address the gas storage needs of the natural gas industry, an industry-driven consortium was created--the Gas Storage Technology Consortium (GSTC). The objective of the GSTC is to provide a means to accomplish industry-driven research and development designed to enhance operational flexibility and deliverability of the Nation's gas storage system, and provide a cost effective, safe, and reliable supply of natural gas to meet domestic demand. This report addresses the activities for the quarterly period of January 1, 2006 through March 31, 2006. Activities during this time period were: (1) Organize and host the 2006 Spring Meeting in San Diego, CA on February 21-22, 2006; (2) Award 8 projects for co-funding by GSTC for 2006; (3) New members recruitment; and (4) Improving communications.

Joel L. Morrison; Sharon L. Elder

2006-05-10T23:59:59.000Z

13

Gas Storage Technology Consortium  

SciTech Connect

Gas storage is a critical element in the natural gas industry. Producers, transmission and distribution companies, marketers, and end users all benefit directly from the load balancing function of storage. The unbundling process has fundamentally changed the way storage is used and valued. As an unbundled service, the value of storage is being recovered at rates that reflect its value. Moreover, the marketplace has differentiated between various types of storage services and has increasingly rewarded flexibility, safety, and reliability. The size of the natural gas market has increased and is projected to continue to increase towards 30 trillion cubic feet over the next 10 to 15 years. Much of this increase is projected to come from electric generation, particularly peaking units. Gas storage, particularly the flexible services that are most suited to electric loads, is crucial in meeting the needs of these new markets. To address the gas storage needs of the natural gas industry, an industry-driven consortium was created--the Gas Storage Technology Consortium (GSTC). The objective of the GSTC is to provide a means to accomplish industry-driven research and development designed to enhance the operational flexibility and deliverability of the nation's gas storage system, and provide a cost-effective, safe, and reliable supply of natural gas to meet domestic demand. This report addresses the activities for the quarterly period of April 1, 2007 through June 30, 2007. Key activities during this time period included: (1) Organizing and hosting the 2007 GSTC Spring Meeting; (2) Identifying the 2007 GSTC projects, issuing award or declination letters, and begin drafting subcontracts; (3) 2007 project mentoring teams identified; (4) New NETL Project Manager; (5) Preliminary planning for the 2007 GSTC Fall Meeting; (6) Collecting and compiling the 2005 GSTC project final reports; and (7) Outreach and communications.

Joel L. Morrison; Sharon L. Elder

2007-06-30T23:59:59.000Z

14

Gas Storage Technology Consortium  

Science Conference Proceedings (OSTI)

Gas storage is a critical element in the natural gas industry. Producers, transmission and distribution companies, marketers, and end users all benefit directly from the load balancing function of storage. The unbundling process has fundamentally changed the way storage is used and valued. As an unbundled service, the value of storage is being recovered at rates that reflect its value. Moreover, the marketplace has differentiated between various types of storage services and has increasingly rewarded flexibility, safety, and reliability. The size of the natural gas market has increased and is projected to continue to increase towards 30 trillion cubic feet (TCF) over the next 10 to 15 years. Much of this increase is projected to come from electric generation, particularly peaking units. Gas storage, particularly the flexible services that are most suited to electric loads, is crucial in meeting the needs of these new markets. To address the gas storage needs of the natural gas industry, an industry-driven consortium was created - the Gas Storage Technology Consortium (GSTC). The objective of the GSTC is to provide a means to accomplish industry-driven research and development designed to enhance the operational flexibility and deliverability of the nation's gas storage system, and provide a cost-effective, safe, and reliable supply of natural gas to meet domestic demand. This report addresses the activities for the quarterly period of January1, 2007 through March 31, 2007. Key activities during this time period included: {lg_bullet} Drafting and distributing the 2007 RFP; {lg_bullet} Identifying and securing a meeting site for the GSTC 2007 Spring Proposal Meeting; {lg_bullet} Scheduling and participating in two (2) project mentoring conference calls; {lg_bullet} Conducting elections for four Executive Council seats; {lg_bullet} Collecting and compiling the 2005 GSTC Final Project Reports; and {lg_bullet} Outreach and communications.

Joel L. Morrison; Sharon L. Elder

2007-03-31T23:59:59.000Z

15

GAS STORAGE TECHNOLOGY CONSORTIUM  

SciTech Connect

Gas storage is a critical element in the natural gas industry. Producers, transmission and distribution companies, marketers, and end users all benefit directly from the load balancing function of storage. The unbundling process has fundamentally changed the way storage is used and valued. As an unbundled service, the value of storage is being recovered at rates that reflect its value. Moreover, the marketplace has differentiated between various types of storage services, and has increasingly rewarded flexibility, safety, and reliability. The size of the natural gas market has increased and is projected to continue to increase towards 30 trillion cubic feet (TCF) over the next 10 to 15 years. Much of this increase is projected to come from electric generation, particularly peaking units. Gas storage, particularly the flexible services that are most suited to electric loads, is critical in meeting the needs of these new markets. In order to address the gas storage needs of the natural gas industry, an industry-driven consortium was created--the Gas Storage Technology Consortium (GSTC). The objective of the GSTC is to provide a means to accomplish industry-driven research and development designed to enhance operational flexibility and deliverability of the Nation's gas storage system, and provide a cost effective, safe, and reliable supply of natural gas to meet domestic demand. To accomplish this objective, the project is divided into three phases that are managed and directed by the GSTC Coordinator. Base funding for the consortium is provided by the U.S. Department of Energy (DOE). In addition, funding is anticipated from the Gas Technology Institute (GTI). The first phase, Phase 1A, was initiated on September 30, 2003, and was completed on March 31, 2004. Phase 1A of the project included the creation of the GSTC structure, development and refinement of a technical approach (work plan) for deliverability enhancement and reservoir management. This report deals with Phase 1B and encompasses the period April 1, 2004, through June 30, 2004. During this 3-month period, a Request for Proposals (RFP) was made. A total of 17 proposals were submitted to the GSTC. A proposal selection meeting was held June 9-10, 2004 in Morgantown, West Virginia. Of the 17 proposals, 6 were selected for funding.

Robert W. Watson

2004-07-15T23:59:59.000Z

16

GAS STORAGE TECHNOLOGY CONSORTIUM  

Science Conference Proceedings (OSTI)

Gas storage is a critical element in the natural gas industry. Producers, transmission and distribution companies, marketers, and end users all benefit directly from the load balancing function of storage. The unbundling process has fundamentally changed the way storage is used and valued. As an unbundled service, the value of storage is being recovered at rates that reflect its value. Moreover, the marketplace has differentiated between various types of storage services, and has increasingly rewarded flexibility, safety, and reliability. The size of the natural gas market has increased and is projected to continue to increase towards 30 trillion cubic feet (TCF) over the next 10 to 15 years. Much of this increase is projected to come from electric generation, particularly peaking units. Gas storage, particularly the flexible services that are most suited to electric loads, is critical in meeting the needs of these new markets. In order to address the gas storage needs of the natural gas industry, an industry-driven consortium was created--the Gas Storage Technology Consortium (GSTC). The objective of the GSTC is to provide a means to accomplish industry-driven research and development designed to enhance operational flexibility and deliverability of the Nation's gas storage system, and provide a cost effective, safe, and reliable supply of natural gas to meet domestic demand. To accomplish this objective, the project is divided into three phases that are managed and directed by the GSTC Coordinator. Base funding for the consortium is provided by the U.S. Department of Energy (DOE). In addition, funding is anticipated from the Gas Technology Institute (GTI). The first phase, Phase 1A, was initiated on September 30, 2003, and is scheduled for completion on March 31, 2004. Phase 1A of the project includes the creation of the GSTC structure, development of constitution (by-laws) for the consortium, and development and refinement of a technical approach (work plan) for deliverability enhancement and reservoir management. This report deals with the second 3-months of the project and encompasses the period December 31, 2003, through March 31, 2003. During this 3-month, the dialogue of individuals representing the storage industry, universities and the Department of energy was continued and resulted in a constitution for the operation of the consortium and a draft of the initial Request for Proposals (RFP).

Robert W. Watson

2004-04-17T23:59:59.000Z

17

Vehicle Technologies Office: Natural Gas Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Natural Gas Research to someone by E-mail Share Vehicle Technologies Office: Natural Gas Research on Facebook Tweet about Vehicle Technologies Office: Natural Gas Research on...

18

Changing society using new technologies: Youth participation in the social media revolution and its implications for the development of democracy in sub-Saharan Africa  

Science Conference Proceedings (OSTI)

This paper considers the adequacy of simple access to technology for acquiring active citizenship skills. The paper posits questions and then provides tentative answers to the questions: Is acquiring the latest technology a prerequisite for ... Keywords: Citizenship education, Developing countries, Social media revolution, Technology access

Alnaaz Kassam

2013-06-01T23:59:59.000Z

19

Oil & Natural Gas Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

Res., 104(B10), 22985-23003. Collett, T.S. (1992), Potential of gas hydrates outlined, Oil Gas J., 90(25), 84-87. 70 Cook, A.E., Goldberg, D., and R.L. Kleinberg (2008),...

20

Oil & Natural Gas Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

... 6 Task 5: Carbon Inputs and Outputs to Gas Hydrate Systems ... 7 Task 6: Numerical Models for...

Note: This page contains sample records for the topic "gas revolution technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Pot Gas Cooling Technologies  

Science Conference Proceedings (OSTI)

... has been enormously increased by the suppliers of pot gas treatment plants, ... and Capillary Instabilities in Carbon-anode using Lattice Boltzmann Method.

22

Oil & Natural Gas Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

8 FXe 0.1 1 10 100 1000 FNeFKr 0.001 0.01 0.1 1 10 Air-Like XeKr Enrichment from GasOil source Material Solubility Fractionation Hydrate Fractionation (Non-thermogenic source)...

23

Revolution Now | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Revolution Now Revolution Now Revolution Now Policies and investments to support emerging clean energy technology are a cornerstone of the Energy Department's work to advance the energy economy of tomorrow. Thanks to decades of these policies and investments, the clean energy future has already arrived for four key technologies: wind turbines, solar panels, electric vehicles and LED light bulbs, each of which has seen drops in cost and growth in consumer demand over the past four years. Revolution Now: The Future Arrives for Four Clean Energy Technologies tells the story of how these four technologies successfully crossed "the valley of death" -- what entrepreneurs commonly call the gap between research and wide-scale deployment -- and joined a burgeoning consumer market for

24

Gas hydrates: Technology status report  

Science Conference Proceedings (OSTI)

In 1983, the US Department of Energy (DOE) assumed the responsibility for expanding the knowledge base and for developing methods to recover gas from hydrates. These are ice-like mixtures of gas and water where gas molecules are trapped within a framework of water molecules. This research is part of the Unconventional Gas Recovery (UGR) program, a multidisciplinary effort that focuses on developing the technology to produce natural gas from resources that have been classified as unconventional because of their unique geologies and production mechanisms. Current work on gas hydrates emphasizes geological studies; characterization of the resource; and generic research, including modeling of reservoir conditions, production concepts, and predictive strategies for stimulated wells. Complementing this work is research on in situ detection of hydrates and field tests to verify extraction methods. Thus, current research will provide a comprehensive technology base from which estimates of reserve potential can be made, and from which industry can develop recovery strategies. 7 refs., 3 figs., 6 tabs.

Not Available

1987-01-01T23:59:59.000Z

25

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

System Dynamics Geological & Env. Systems Materials Science Contacts TECHNOLOGIES Oil & Natural Gas Supply Deepwater Technology Enhanced Oil Recovery Gas Hydrates Natural Gas...

26

Unconventional gas outlook: resources, economics, and technologies  

Science Conference Proceedings (OSTI)

The report explains the current and potential of the unconventional gas market including country profiles, major project case studies, and new technology research. It identifies the major players in the market and reports their current and forecasted projects, as well as current volume and anticipated output for specific projects. Contents are: Overview of unconventional gas; Global natural gas market; Drivers of unconventional gas sources; Forecast; Types of unconventional gas; Major producing regions Overall market trends; Production technology research; Economics of unconventional gas production; Barriers and challenges; Key regions: Australia, Canada, China, Russia, Ukraine, United Kingdom, United States; Major Projects; Industry Initiatives; Major players. Uneconomic or marginally economic resources such as tight (low permeability) sandstones, shale gas, and coalbed methane are considered unconventional. However, due to continued research and favorable gas prices, many previously uneconomic or marginally economic gas resources are now economically viable, and may not be considered unconventional by some companies. Unconventional gas resources are geologically distinct in that conventional gas resources are buoyancy-driven deposits, occurring as discrete accumulations in structural or stratigraphic traps, whereas unconventional gas resources are generally not buoyancy-driven deposits. The unconventional natural gas category (CAM, gas shales, tight sands, and landfill) is expected to continue at double-digit growth levels in the near term. Until 2008, demand for unconventional natural gas is likely to increase at an AAR corresponding to 10.7% from 2003, aided by prioritized research and development efforts. 1 app.

Drazga, B. (ed.)

2006-08-15T23:59:59.000Z

27

Clean Cities: Natural Gas Vehicle Technology Forum  

NLE Websites -- All DOE Office Websites (Extended Search)

Forum Forum Natural Gas Vehicle Technology Form (NGVTF) logo The Natural Gas Vehicle Technology Forum (NGVTF) supports development and deployment of commercially competitive natural gas engines, vehicles, and infrastructure. Learn about NGVTF's purpose, activities, meetings, stakeholders, steering committee, and webinars. Purpose Led by the National Renewable Energy Laboratory in partnership with the U.S. Department of Energy and the California Energy Commission, NGVTF unites a diverse group of stakeholders to: Share information and resources Identify natural gas engine, vehicle, and infrastructure technology targets Facilitate government-industry research, development, demonstration, and deployment (RDD&D) to achieve targets Communicate high-priority needs of natural gas vehicle end users to natural gas equipment and vehicle manufacturers

28

Natural gas pipeline technology overview.  

Science Conference Proceedings (OSTI)

The United States relies on natural gas for one-quarter of its energy needs. In 2001 alone, the nation consumed 21.5 trillion cubic feet of natural gas. A large portion of natural gas pipeline capacity within the United States is directed from major production areas in Texas and Louisiana, Wyoming, and other states to markets in the western, eastern, and midwestern regions of the country. In the past 10 years, increasing levels of gas from Canada have also been brought into these markets (EIA 2007). The United States has several major natural gas production basins and an extensive natural gas pipeline network, with almost 95% of U.S. natural gas imports coming from Canada. At present, the gas pipeline infrastructure is more developed between Canada and the United States than between Mexico and the United States. Gas flows from Canada to the United States through several major pipelines feeding U.S. markets in the Midwest, Northeast, Pacific Northwest, and California. Some key examples are the Alliance Pipeline, the Northern Border Pipeline, the Maritimes & Northeast Pipeline, the TransCanada Pipeline System, and Westcoast Energy pipelines. Major connections join Texas and northeastern Mexico, with additional connections to Arizona and between California and Baja California, Mexico (INGAA 2007). Of the natural gas consumed in the United States, 85% is produced domestically. Figure 1.1-1 shows the complex North American natural gas network. The pipeline transmission system--the 'interstate highway' for natural gas--consists of 180,000 miles of high-strength steel pipe varying in diameter, normally between 30 and 36 inches in diameter. The primary function of the transmission pipeline company is to move huge amounts of natural gas thousands of miles from producing regions to local natural gas utility delivery points. These delivery points, called 'city gate stations', are usually owned by distribution companies, although some are owned by transmission companies. Compressor stations at required distances boost the pressure that is lost through friction as the gas moves through the steel pipes (EPA 2000). The natural gas system is generally described in terms of production, processing and purification, transmission and storage, and distribution (NaturalGas.org 2004b). Figure 1.1-2 shows a schematic of the system through transmission. This report focuses on the transmission pipeline, compressor stations, and city gates.

Folga, S. M.; Decision and Information Sciences

2007-11-01T23:59:59.000Z

29

Vehicle Technologies Office: Natural Gas Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Natural Gas Research Natural Gas Research Natural gas offers tremendous opportunities for reducing the use of petroleum in transportation. Medium and heavy-duty fleets, which have significant potential to use natural gas, currently consume more than a third of the petroleum in transportation in the U.S. Natural gas is an excellent fit for a wide range of heavy-duty applications, especially transit buses, refuse haulers, and Class 8 long-haul or delivery trucks. In addition, natural gas can be a very good choice for light-duty vehicle fleets with central refueling. See the Alternative Fuels Data Center for a description of the uses and benefits of natural gas vehicles or its Laws and Incentives database for information on tax incentives. The Vehicle Technologies Office (VTO) supports the development of natural gas engines and research into renewable natural gas production.

30

Federal Energy Management Program: Landfill Gas Resources and Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Landfill Gas Landfill Gas Resources and Technologies to someone by E-mail Share Federal Energy Management Program: Landfill Gas Resources and Technologies on Facebook Tweet about Federal Energy Management Program: Landfill Gas Resources and Technologies on Twitter Bookmark Federal Energy Management Program: Landfill Gas Resources and Technologies on Google Bookmark Federal Energy Management Program: Landfill Gas Resources and Technologies on Delicious Rank Federal Energy Management Program: Landfill Gas Resources and Technologies on Digg Find More places to share Federal Energy Management Program: Landfill Gas Resources and Technologies on AddThis.com... Energy-Efficient Products Technology Deployment Renewable Energy Federal Requirements Renewable Resources & Technologies

31

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy System Dynamics Geological & Env. Systems Materials Science Contacts TECHNOLOGIES Oil & Natural Gas Supply Deepwater Technology Enhanced Oil Recovery Gas Hydrates Natural...

32

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy System Dynamics Geological & Env. Systems Materials Science Contacts TECHNOLOGIES Oil & Natural Gas Supply Deepwater Technology Enhanced Oil Recovery Gas Hydrates Natural...

33

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Application of fiber optic temperature and strain sensing technology to gas hydrates Application of fiber optic temperature and strain sensing technology to gas hydrates Authors:...

34

DOE's Early Investment in Shale Gas Technology Producing Results...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE's Early Investment in Shale Gas Technology Producing Results Today DOE's Early Investment in Shale Gas Technology Producing Results Today February 2, 2011 - 12:00pm Addthis...

35

GTI online - matching gas technologies with global gas markets  

SciTech Connect

The International Centre for Gas Technology Information (ICGTI) is a technology information centre of the International Energy Agency (IEA). Its members account for more than half the world`s natural gas production and consumption. ICGTI has established a web site, GTI Online (http://www.icgti.org). GTI Online is designed to cover all aspects of the gas industry from production to end-use as well as supporting technologies, including market assessment, national energy policies, environmental information and computing and modeling techniques. It si designed to use existing information sources whenever possible, so as not to duplicate public and/or commercial efforts. It is intended to fill the gap in providing useful international information to both the US and global market.

Lang, M., Manor, D.

1997-10-01T23:59:59.000Z

36

Fuel Cell Technologies Office: Natural Gas and Hydrogen Infrastructure  

NLE Websites -- All DOE Office Websites (Extended Search)

Natural Gas and Natural Gas and Hydrogen Infrastructure Opportunities Workshop to someone by E-mail Share Fuel Cell Technologies Office: Natural Gas and Hydrogen Infrastructure Opportunities Workshop on Facebook Tweet about Fuel Cell Technologies Office: Natural Gas and Hydrogen Infrastructure Opportunities Workshop on Twitter Bookmark Fuel Cell Technologies Office: Natural Gas and Hydrogen Infrastructure Opportunities Workshop on Google Bookmark Fuel Cell Technologies Office: Natural Gas and Hydrogen Infrastructure Opportunities Workshop on Delicious Rank Fuel Cell Technologies Office: Natural Gas and Hydrogen Infrastructure Opportunities Workshop on Digg Find More places to share Fuel Cell Technologies Office: Natural Gas and Hydrogen Infrastructure Opportunities Workshop on AddThis.com...

37

Landfill gas recovery: a technology status report  

DOE Green Energy (OSTI)

Landfill gas, which consists mainly of methane and carbon dioxide, can be recovered and used as a fuel. Processing will upgrade it to a high-Btu gas of pipeline quality. There are more than a dozen commercial landfill-gas recovery facilities in the US at present, all at relatively large sites. The amount of gas produced by a given site is a function of size, composition, and age of the landfill. Various techniques can be used to enhance gas production and yield, including controlled addition of moisture and nutrients; bacterial seeding and pH control also appear useful. Several computer models have been developed to examine the effects of various parameters on gas production and yield; these can aid in predicting optimum gas recovery and in maintaining the proper chemical balance within the producing portion of the landfill. Economically, a site's viability depends on its location and potential users, current competing energy costs, and legislation governing the site's operation. Legal problems of site operation can occur because of environmental and safety issues, as well as from questions of gas ownership, liability, and public utility commission considerations. Currently, R and D is under way to improve present recovery techniques and to develop new technologies and concepts. Cost comparisons and potential environmental impacts are being examined. Additional research is needed in the areas of gas enhancement, decompositional analysis, computer modeling, gas characterization, instrumentation, and engineering cost analysis. 77 references, 11 figures, 23 tables.

Zimmermann, R.E.; Lytwynyshyn, G.R.; Wilkey, M.L.

1983-08-01T23:59:59.000Z

38

Clean Cities: Natural Gas Vehicle Technology Forum Leadership Committee  

NLE Websites -- All DOE Office Websites (Extended Search)

Vehicle Technology Forum Vehicle Technology Forum Leadership Committee Meeting to someone by E-mail Share Clean Cities: Natural Gas Vehicle Technology Forum Leadership Committee Meeting on Facebook Tweet about Clean Cities: Natural Gas Vehicle Technology Forum Leadership Committee Meeting on Twitter Bookmark Clean Cities: Natural Gas Vehicle Technology Forum Leadership Committee Meeting on Google Bookmark Clean Cities: Natural Gas Vehicle Technology Forum Leadership Committee Meeting on Delicious Rank Clean Cities: Natural Gas Vehicle Technology Forum Leadership Committee Meeting on Digg Find More places to share Clean Cities: Natural Gas Vehicle Technology Forum Leadership Committee Meeting on AddThis.com... Goals & Accomplishments Partnerships National Clean Fleets Partnership

39

Natural Gas Technologies Center | Open Energy Information  

Open Energy Info (EERE)

Technologies Center Technologies Center Jump to: navigation, search Logo: Natural Gas Technologies Center Name Natural Gas Technologies Center Address 1350, Nobel, Boucherville, Quebec, Canada Place Montreal, Quebec Zip J4B 5H3 Number of employees 11-50 Year founded 1992 Phone number 1.450.449.4774 Coordinates 45.5678623°, -73.4186892° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":45.5678623,"lon":-73.4186892,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

40

Oil & Natural Gas Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

May -October, 2009 May -October, 2009 Submitted by: Rice University, University of Texas, and Oklahoma State University George J. Hirasaki and Walter Chapman, Chemical and Biomolecular Engineering Gerald R. Dickens, Colin A. Zelt, and Brandon E. Dugan, Earth Science Kishore K. Mohanty, University of Texas Priyank Jaiswal, Oklahoma State University November, 2009 DOE Award No.: DE-FC26-06NT42960 John Terneus, Program Officer Rice University - MS 362 6100 Main St. Houston, TX 77251-1892 Phone: 713-348-5416; FAX: 713-348-5478; Email: gjh@rice.edu Prepared for: United States Department of Energy National Energy Technology Laboratory Office of Fossil Energy 2 Table of Contents Disclaimer .......................................................................................................... 3

Note: This page contains sample records for the topic "gas revolution technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Western gas sands: Technology status report  

Science Conference Proceedings (OSTI)

Research on western gas sands is conducted by the US Department of Energy's Morgantown Technology Center to encourage the development of very low permeability gas sands in the western United States. The current search is an outgrowth of earlier Government research on tight sands in which nuclear and massive hydraulics fracturing stimulations were tested without definitive results. Based on input from the gas industry, universities, and geologic and engineering consulting firms, activites were broadened to include fundamental research and development. Consequently, the focus of the research for the last several years has been on improving diagnostic instruments for evaluating reservoir and stimulation performances, interpreting geophysical and engineering data, and stimulation techniques. Intergrated geologic studies of three depositional basins that contain tight lenticular sandstone units have also been pursued as part of this new effort. To date, the following tentative conclusions have been formulated: The permeability of the tight gas sands can be as much as three to four orders of magnitude lower than that of conventional gas deposits. Nineteen western geologic basins and trends have been identified that contain significant volumes of tight gas. Gas resources in the priority geologic basins have been estimated as follows: Piceance Basin, 420 Tcf.; Greater Green River Basin, 4971 Tcf.; and Uinta Basin, 21 Tcf. The critical parameters for successfully developing tight sandstone resources are the presence of natural fractures within a reservoir and the effective propped length of hydraulically induced fractures. Stimulation technology is presently insufficient to efficiently recover gas from lenticular, tight reservoirs. 15 refs., 14 figs., 3 tabs.

Not Available

1988-01-01T23:59:59.000Z

42

Oil and Natural Gas Program Commericialized Technologies and...  

NLE Websites -- All DOE Office Websites (Extended Search)

OIL AND NATURAL GAS PROGRAM National Energy Technology Laboratory 2 Natural Gas and Oil Exploration and Production Enhanced Oil Recovery NETL has advanced the science of enhanced...

43

Clean Cities: Natural Gas Vehicle Technology Forum Technical...  

NLE Websites -- All DOE Office Websites (Extended Search)

infrastructure technology development and marketing, small scale liquefied natural gas (LNG) production, and codes & standards. Many attendees also toured Pacific Gas & Electric's...

44

Technology Key to Harnessing Natural Gas Potential | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Key to Harnessing Natural Gas Potential Technology Key to Harnessing Natural Gas Potential July 18, 2012 - 3:52pm Addthis Deputy Secretary Daniel Poneman tours Proinlosa Energy...

45

DOE's Early Investment in Shale Gas Technology Producing Results...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

sands, and methane from coalbeds, DOE developed and stimulated the deployment of advanced exploration and production technologies. These technologies recovered new gas supplies...

46

Gas Reactor Technology R&D  

NLE Websites -- All DOE Office Websites (Extended Search)

U.S. Department of Energy to Invest U.S. Department of Energy to Invest up to $7.3 Million for "Deep-Burn" Gas-Reactor Technology R&D Artist's rendering of Nuclear Plant An artist's rendering of the Next Generation Nuclear Plant concept. The U.S. Department of Energy today announced a Funding Opportunity Announcement (FOA) valued at $7.3 million for universities, commercial entities, National Laboratories with expertise in the concept of nuclear fuel "Deep-Burn" in which plutonium and higher transuranics recycled from spent nuclear fuel are destroyed. The funding opportunity seeks to establish the technological foundations that will support the role of the very-high-temperature, gas-cooled reactor (VHTR) in the nuclear fuel cycle -- which is one of the prototype reactors being researched/developed under

47

NETL: Oil and Natural Gas: Deepwater Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

Deepwater Technology Deepwater Technology Research Project Summaries Reference Shelf O&G Document Archive Deepwater (and Ultra-Deepwater, 5000 feet of water depth and beyond) is recognized as one of the last remaining areas of the world were oil and natural gas resources remain to be discovered and produced. The architecture of the systems employed to cost-effectively develop these resources in an environmentally safe manner, reflect some of industry’s most advanced engineering accomplishments. NETL is funding research to catalyze further advances that can help Gulf of Mexico discoveries progress to production quickly and safely, and that can help maximize oil and gas recovery from fields that are currently at the edge of industry capabilities. Many of these efforts are focused on subsea production

48

Technologies for the oil and gas industry  

DOE Green Energy (OSTI)

This is the final report of a five-month, Laboratory Directed Research and Development (LDRD) project at Los Alamos National Laboratory (LANL). The authors performed a preliminary design study to explore the plausibility of using pulse-tube refrigeration to cool instruments in a hot down-hole environment for the oil and gas industry or geothermal industry. They prepared and distributed a report showing that this appears to be a viable technology.

Goff, S.J.; Swift, G.W.; Gardner, D.L.

1998-12-31T23:59:59.000Z

49

Clean Cities: Natural Gas Vehicle Technology Forum 2013 Meeting  

NLE Websites -- All DOE Office Websites (Extended Search)

Forum 2013 Meeting to someone by E-mail Share Clean Cities: Natural Gas Vehicle Technology Forum 2013 Meeting on Facebook Tweet about Clean Cities: Natural Gas Vehicle Technology...

50

Clean Cities: Natural Gas Vehicle Technology Forum 2013 Meeting  

NLE Websites -- All DOE Office Websites (Extended Search)

Forum 2013 Meeting Natural Gas Vehicle Technology Form (NGVTF) logo The Natural Gas Vehicle Technology Forum (NGVTF) will hold a meeting for stakeholders on Oct. 22-23, 2013, at...

51

NETL: Natural Gas Resources, Enhanced Oil Recovery, Deepwater Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

and Natural Gas Projects and Natural Gas Projects Index of Research Project Summaries Use the links provided below to access detailed DOE/NETL project information, including project reports, contacts, and pertinent publications. Search Natural Gas and Oil Projects Current Projects Natural Gas Resources Shale Gas Environmental Other Natural Gas Resources Ehanced Oil Recovery CO2 EOR Environmental Other EOR & Oil Resources Deepwater Technology Offshore Architecture Safety & Environmental Other Deepwater Technology Methane Hydrates DOE/NETL Projects Completed Projects Completed Natural Gas Resources Completed Enhanced Oil Recovery Completed Deepwater Technology Completed E&P Technologies Completed Environmental Solutions Completed Methane Hydrates Completed Transmission & Distribution

52

Physical gas stream cleanup: Technology status report  

SciTech Connect

This report is a summary of the status of particulate control technologies for use at high temperatures and high pressures. The technologies are being developed under the Physical Gas Stream Cleanup Program that is administered by the US Department of Energy, Morgantown Energy Technology Center. The intended uses of the particulate control technologies are to protect components in advanced coal systems, such as integrated gasification combined cycles, pressurized fluidized-bed combustion combined cycles, gasification molten carbonate fuel cells, and direct coal-fueled turbines. The use of particulate control technologies for these advanced energy conversion systems requires separation and collection of particles at temperatures in excess of 1000/sup 0/F and at pressures in excess of 7 atmospheres. These temperature and pressure regimes represent a drastic departure from those of conventional technologies. The Physical Gas Stream Cleanup Program seeks to establish a technical and economic data base that will demonstrate the feasibility of high-temperature, high-pressure particulate control. Particulate control concepts and their corresponding research and development projects are described in this report. These projects include subpilot-scale tests of an electrostatic precipitator, a ceramic cross-flow filter, and a screenless granular-bed filter on a 30-inch diameter pressurized fluidized-bed combustor. Bench-scale tests will also be conducted using a ceramic cross-flow filter, a ceramic bag filter, and an electrostatic precipitator on a 6-inch diameter fluidized-bed gasifier. Additional research involves laboratory evaluation of acoustic agglomeration, turbulence characterization and suppression in cyclones and characterization of ceramic fabrics for bag filters. Each project and significant accomplishments in FY 85 are described. 14 refs., 25 figs., 5 tabs.

1986-04-01T23:59:59.000Z

53

Small gas-turbine-engine technology  

SciTech Connect

Performance of small gas turbine engines in the 250 to 1000 hp size range is significantly lower than that of large engines. Engines of this size are typically used in rotorcraft, commutercraft, general aviation, and cruise missile applications. Principal reasons for lower efficiencies of smaller engines are well known: Component efficiencies are lower by as much as 8 to 10 percentage points because of size effects. Small engines are designed for lower cycle pressures and temperatures because of smaller blading and cooling limitations. The highly developed analytical and manufacturing techniques evolved for large engines are not directly transferrable to small engines. Thus, it has been recognized that a focused effort addressing technologies for small engines was needed and could significantly impact their performance. Recently, in-house and contract studies were undertaken to identify advanced engine cycle and component requirements for substantial performance improvement of small gas turbines for projected year 2000 applications. This paper presents results of both in-house research and contract studies, conducted with Allison, AVCO Lycoming, Garrett, Teledyne CAE, and Williams International Rotorcraft results are emphasized. Projected fuel savings of 22-42% could be attained. Accompanying direct operating cost reductions of 11-17%, depending on fuel cost, were also estimated. High payoff technologies are identified for all engine applications, and recent results of experimental research to evolve the high payoff technologies are described.

Niedwiecki, R.W.; Meitner, P.L.

1991-01-01T23:59:59.000Z

54

Microbial proteomics: the quiet revolution  

SciTech Connect

Technological developments in DNA sequencing and their application to study thousands of microbial genomes or even microbial ecosystems still today often make the headlines of general newspapers and scientific journals. These revolutionary changes are hiding another revolution that is unfolding more quietly in the background: the development of microbial proteomics to study genome expression products. It is important to recognize that while DNA sequencing reveals extensive details about the genomic potential of an organism or community, proteomic measurements reveal the functional gene products that are present and operational under specific environmental conditions, and thus perhaps better characterize the critical biomolecules that execute the life processes (enzymes, signaling, structural factors, etc.).

Seraphin, Bertrand [University of Strasbourg, France; Hettich, Robert {Bob} L [ORNL

2012-01-01T23:59:59.000Z

55

Fuel Cell Technologies Office: Compressed Natural Gas and Hydrogen Fuels  

NLE Websites -- All DOE Office Websites (Extended Search)

Compressed Natural Gas Compressed Natural Gas and Hydrogen Fuels Workshop to someone by E-mail Share Fuel Cell Technologies Office: Compressed Natural Gas and Hydrogen Fuels Workshop on Facebook Tweet about Fuel Cell Technologies Office: Compressed Natural Gas and Hydrogen Fuels Workshop on Twitter Bookmark Fuel Cell Technologies Office: Compressed Natural Gas and Hydrogen Fuels Workshop on Google Bookmark Fuel Cell Technologies Office: Compressed Natural Gas and Hydrogen Fuels Workshop on Delicious Rank Fuel Cell Technologies Office: Compressed Natural Gas and Hydrogen Fuels Workshop on Digg Find More places to share Fuel Cell Technologies Office: Compressed Natural Gas and Hydrogen Fuels Workshop on AddThis.com... Publications Program Publications Technical Publications Educational Publications

56

Clean Cities: Natural Gas Vehicle Technology Forum 2011 Meeting  

NLE Websites -- All DOE Office Websites (Extended Search)

1 Meeting to someone by E-mail 1 Meeting to someone by E-mail Share Clean Cities: Natural Gas Vehicle Technology Forum 2011 Meeting on Facebook Tweet about Clean Cities: Natural Gas Vehicle Technology Forum 2011 Meeting on Twitter Bookmark Clean Cities: Natural Gas Vehicle Technology Forum 2011 Meeting on Google Bookmark Clean Cities: Natural Gas Vehicle Technology Forum 2011 Meeting on Delicious Rank Clean Cities: Natural Gas Vehicle Technology Forum 2011 Meeting on Digg Find More places to share Clean Cities: Natural Gas Vehicle Technology Forum 2011 Meeting on AddThis.com... Goals & Accomplishments Partnerships National Clean Fleets Partnership National Parks Initiative Electric Vehicle Infrastructure Training Program Advanced Vehicle Technology Competitions Natural Gas Transit & School Bus Users Group

57

Oil & Natural Gas Projects Exploration and Production Technologies | Open  

Open Energy Info (EERE)

Oil & Natural Gas Projects Exploration and Production Technologies Oil & Natural Gas Projects Exploration and Production Technologies Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Oil & Natural Gas Projects Exploration and Production Technologies Author U.S. Department of Energy Published Publisher Not Provided, Date Not Provided DOI Not Provided Check for DOI availability: http://crossref.org Online Internet link for Oil & Natural Gas Projects Exploration and Production Technologies Citation U.S. Department of Energy. Oil & Natural Gas Projects Exploration and Production Technologies [Internet]. [cited 2013/10/15]. Available from: http://www.netl.doe.gov/technologies/oil-gas/Petroleum/projects/EP/Explor_Tech/P225.htm Retrieved from "http://en.openei.org/w/index.php?title=Oil_%26_Natural_Gas_Projects_Exploration_and_Production_Technologies&oldid=688583

58

Clean Cities: Natural Gas Vehicle Technology Forum 2012 Meeting  

NLE Websites -- All DOE Office Websites (Extended Search)

2 Meeting to someone by E-mail 2 Meeting to someone by E-mail Share Clean Cities: Natural Gas Vehicle Technology Forum 2012 Meeting on Facebook Tweet about Clean Cities: Natural Gas Vehicle Technology Forum 2012 Meeting on Twitter Bookmark Clean Cities: Natural Gas Vehicle Technology Forum 2012 Meeting on Google Bookmark Clean Cities: Natural Gas Vehicle Technology Forum 2012 Meeting on Delicious Rank Clean Cities: Natural Gas Vehicle Technology Forum 2012 Meeting on Digg Find More places to share Clean Cities: Natural Gas Vehicle Technology Forum 2012 Meeting on AddThis.com... Goals & Accomplishments Partnerships National Clean Fleets Partnership National Parks Initiative Electric Vehicle Infrastructure Training Program Advanced Vehicle Technology Competitions Natural Gas Transit & School Bus Users Group

59

Clean Cities: Natural Gas Vehicle Technology Forum 2014 Meeting  

NLE Websites -- All DOE Office Websites (Extended Search)

About About Printable Version Share this resource Send a link to Clean Cities: Natural Gas Vehicle Technology Forum 2014 Meeting to someone by E-mail Share Clean Cities: Natural Gas Vehicle Technology Forum 2014 Meeting on Facebook Tweet about Clean Cities: Natural Gas Vehicle Technology Forum 2014 Meeting on Twitter Bookmark Clean Cities: Natural Gas Vehicle Technology Forum 2014 Meeting on Google Bookmark Clean Cities: Natural Gas Vehicle Technology Forum 2014 Meeting on Delicious Rank Clean Cities: Natural Gas Vehicle Technology Forum 2014 Meeting on Digg Find More places to share Clean Cities: Natural Gas Vehicle Technology Forum 2014 Meeting on AddThis.com... Goals & Accomplishments Partnerships National Clean Fleets Partnership National Parks Initiative Electric Vehicle Infrastructure Training Program

60

A Clean Energy Revolution -- Now | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

A Clean Energy Revolution -- Now A Clean Energy Revolution -- Now A Clean Energy Revolution -- Now September 19, 2013 - 3:52pm Addthis A Clean Energy Revolution -- Now Dr. Ernest Moniz Dr. Ernest Moniz Secretary of Energy #CleanTechNow: Learn more Watch a video featuring Secretary Moniz that highlights four key energy technologies that have already made America's clean energy future a reality. Read the full "Revolution Now" report. Use the tag #CleanTechNow to share photos on Twitter, Instagram or via email newmedia@hq.doe.gov how clean energy technology already plays a role in your daily life. We'll feature our favorite submissions on Energy.gov next week. Editor's note: This article originally appeared on WhiteHouse.gov. For decades, America has chased after the promise of clean, domestic

Note: This page contains sample records for the topic "gas revolution technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

User`s guide to natural gas technologies  

SciTech Connect

Natural gas technologies that were new five years ago have now been tested in the real world. Those shown to be successful are being improved constantly, and adopted quickly, now that the initial developmental stage is past. This book describes some of these important technological improvements, covering both new engineering concepts and new products which have emerged, as well as important innovations to existing technologies. Many of the chapters include economic analyses which identify the cost savings attributable to the technologies described. Specific areas of development addressed include gas cooling, chillers, desiccant technologies, cogeneration, heating systems, and other natural gas technologies.

Payne, F.W. [ed.] [comp.

1999-09-01T23:59:59.000Z

62

Federal Funding for Technological Revolutions ...  

Science Conference Proceedings (OSTI)

... be in the front lines of cancer treatment, making surgery, radiation treatment and ... Disclaimer / Freedom of Information Act (FOIA) / No Fear Act Policy ...

63

Clean Cities: Natural Gas Vehicle Technology Forum 2005 Meeting and  

NLE Websites -- All DOE Office Websites (Extended Search)

2005 Meeting and Presentations to someone by E-mail 2005 Meeting and Presentations to someone by E-mail Share Clean Cities: Natural Gas Vehicle Technology Forum 2005 Meeting and Presentations on Facebook Tweet about Clean Cities: Natural Gas Vehicle Technology Forum 2005 Meeting and Presentations on Twitter Bookmark Clean Cities: Natural Gas Vehicle Technology Forum 2005 Meeting and Presentations on Google Bookmark Clean Cities: Natural Gas Vehicle Technology Forum 2005 Meeting and Presentations on Delicious Rank Clean Cities: Natural Gas Vehicle Technology Forum 2005 Meeting and Presentations on Digg Find More places to share Clean Cities: Natural Gas Vehicle Technology Forum 2005 Meeting and Presentations on AddThis.com... Goals & Accomplishments Partnerships National Clean Fleets Partnership National Parks Initiative

64

Clean Cities: Natural Gas Vehicle Technology Forum 2010 Meeting and  

NLE Websites -- All DOE Office Websites (Extended Search)

10 Meeting and Presentations to someone by E-mail 10 Meeting and Presentations to someone by E-mail Share Clean Cities: Natural Gas Vehicle Technology Forum 2010 Meeting and Presentations on Facebook Tweet about Clean Cities: Natural Gas Vehicle Technology Forum 2010 Meeting and Presentations on Twitter Bookmark Clean Cities: Natural Gas Vehicle Technology Forum 2010 Meeting and Presentations on Google Bookmark Clean Cities: Natural Gas Vehicle Technology Forum 2010 Meeting and Presentations on Delicious Rank Clean Cities: Natural Gas Vehicle Technology Forum 2010 Meeting and Presentations on Digg Find More places to share Clean Cities: Natural Gas Vehicle Technology Forum 2010 Meeting and Presentations on AddThis.com... Goals & Accomplishments Partnerships National Clean Fleets Partnership National Parks Initiative

65

Impact of Unconventional Gas Technology in the Annual Energy ...  

U.S. Energy Information Administration (EIA)

Impact of Unconventional Gas Technology in the Annual Energy Outlook 2000 by Ted McCallister U.S. natural gas demand is projected to exceed 30 trillion cubic feet per ...

66

NETL: News Release - Successful Oil and Gas Technology Transfer...  

NLE Websites -- All DOE Office Websites (Extended Search)

23, 2010 Successful Oil and Gas Technology Transfer Program Extended to 2015 Long-Term Success of Stripper Well Consortium Supports Small Oil and Gas Producers Washington, D.C. -...

67

Advanced Technologies For Stripper Gas Well Enhancement  

SciTech Connect

Stripper gas and oil well operators frequently face a dilemma regarding maximizing production from low-productivity wells. With thousands of stripper wells in the United States covering extensive acreage, it is difficult to identify easily and efficiently marginal or underperforming wells. In addition, the magnitude of reviewing vast amounts of data places a strain on an operator's work force and financial resources. Schlumberger DCS, in cooperation with the National Energy Technology Laboratory (NETL) and the U.S. Department of Energy (DOE), has created software and developed in-house analysis methods to identify remediation potential in stripper wells relatively easily. This software is referred to as Stripper Well Analysis Remediation Methodology (SWARM). SWARM was beta-tested with data pertaining to two gas fields located in northwestern Pennsylvania and had notable results. Great Lakes Energy Partners, LLC (Great Lakes) and Belden & Blake Corporation (B&B) both operate wells in the first field studied. They provided data for 729 wells, and we estimated that 41 wells were candidates for remediation. However, for reasons unbeknownst to Schlumberger these wells were not budgeted for rework by the operators. The second field (Cooperstown) is located in Crawford, Venango, and Warren counties, Pa and has more than 2,200 wells operated by Great Lakes. This paper discusses in depth the successful results of a candidate recognition study of this area. We compared each well's historical production with that of its offsets and identified 339 underperformers before considering remediation costs, and 168 economically viable candidates based on restimulation costs of $50,000 per well. From this data, we prioritized a list based on the expected incremental recoverable gas and 10% discounted net present value (NPV). For this study, we calculated the incremental gas by subtracting the volumes forecasted after remediation from the production projected at its current configuration. Assuming that remediation efforts increased production from the 168 marginal wells to the average of their respective offsets, approximately 6.4 Bscf of gross incremental gas with a NPV approximating $4.9 million after investment, would be made available to the domestic market. Seventeen wells have successfully been restimulated to date and have already obtained significant production increases. At the time of this report, eight of these wells had enough post-rework production data available to forecast the incremental gas and verify the project's success. This incremental gas is estimated at 615 MMscf. The outcome of the other ten wells will be determined after more post-refrac production data becomes available. Plans are currently underway for future restimulations. The success of this project has shown the value of this methodology to recognize underperforming wells quickly and efficiently in fields containing hundreds or thousands of wells. This contributes considerably to corporate net income and domestic natural gas and/or oil reserves.

Ronald J. MacDonald; Charles M. Boyer; Joseph H. Frantz Jr; Paul A. Zyglowicz

2005-04-01T23:59:59.000Z

68

NETL: News Release - Natural Gas Compression Technology Improves...  

NLE Websites -- All DOE Office Websites (Extended Search)

2 Natural Gas Compression Technology Improves Transport and Efficiencies, Lowers Operating Costs Innovative Compressor Design Can Extend Productive Life of Stripper Wells,...

69

INAL Office of Fossil Energy Oil & Natural Gas Technology DOE...  

NLE Websites -- All DOE Office Websites (Extended Search)

INAL Office of Fossil Energy Oil & Natural Gas Technology DOE Award No.: DE-FE0010175 Quarterly Research Performance Progress Report (Period ending 06302013) PLANNING OF A MARINE...

70

Clean Cities: Natural Gas Vehicle Technology Forum Technical...  

NLE Websites -- All DOE Office Websites (Extended Search)

Winter 2003) to someone by E-mail Share Clean Cities: Natural Gas Vehicle Technology Forum Technical Committee Meeting (Winter 2003) on Facebook Tweet about Clean Cities: Natural...

71

Role of Alternative Energy Sources: Natural Gas Technology Assessment  

NLE Websites -- All DOE Office Websites (Extended Search)

Role of Alternative Energy Sources: Natural Gas Technology Assessment June 30, 2012 DOENETL-20121539 OFFICE OF FOSSIL ENERGY Disclaimer This report was prepared as an account of...

72

Office of Fossil Energy Oil & Natural Gas Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

Fossil Energy Oil & Natural Gas Technology Detection and Production of Methane Hydrate End of Phase 2 Topical Report Reporting Period: June, 2007-June, 2008 Submitted by: Rice...

73

NETL: News Release - DOE to Sponsor Upcoming Greenhouse Gas Technologi...  

NLE Websites -- All DOE Office Websites (Extended Search)

Conference Web Site WASHINGTON, D. C. - The Department of Energy's Office of Fossil Energy announced today that the 9th International Conference on Greenhouse Gas Technologies...

74

Vehicle Technologies Office: Natural Gas Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Natural Gas Research Natural gas offers tremendous opportunities for reducing the use of petroleum in transportation. Medium and heavy-duty fleets, which have significant potential...

75

Remote Gas Well Monitoring Technology Applied to Marcellus Shale Site |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Remote Gas Well Monitoring Technology Applied to Marcellus Shale Remote Gas Well Monitoring Technology Applied to Marcellus Shale Site Remote Gas Well Monitoring Technology Applied to Marcellus Shale Site February 10, 2012 - 12:00pm Addthis Washington, DC - A technology to remotely monitor conditions at energy-rich Marcellus Shale gas wells to help insure compliance with environmental requirements has been developed through a research partnership funded by the U.S. Department of Energy (DOE). NETL-RUA researcher Dr. Michael McCawley hasdeveloped a technology to remotely monitor theenvironment around energy-rich Marcellus Shale gas wells. Photo courtesy of West Virginia University.The technology - which involves three wireless monitoring modules to measure volatile organic compounds, dust, light and sound - is currently being tested at a Marcellus

76

Greenhouse Gas Return on Investment: A New Metric for Energy Technology  

E-Print Network (OSTI)

Gas INTRODUCTION Alternative energy technologies such asmotivations of alternative energy technologies: mitigatingaddresses the goal of alternative energy technology

Reich-Weiser, Corinne; Dornfeld, David; Horne, Steve

2008-01-01T23:59:59.000Z

77

Landfill Gas Resources and Technologies | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Landfill Gas Resources and Technologies Landfill Gas Resources and Technologies Landfill Gas Resources and Technologies October 7, 2013 - 9:27am Addthis Photo of a bulldozer on top of a large trash mound in a landfill with a cloudy sky in the backdrop. Methane and other gases produced from landfill decomposition can be leveraged for energy. This page provides a brief overview of landfill gas energy resources and technologies supplemented by specific information to apply landfill gas energy within the Federal sector. Overview Landfill gases are a viable energy resource created during waste decomposition. Landfills are present in most communities. These resources can be tapped to generate heat and electricity. As organic waste decomposes, bio-gas is produced made up of roughly half methane, half carbon dioxide, and small amounts of non-methane organic

78

Bio Gas Technologies LTd | Open Energy Information  

Open Energy Info (EERE)

is involved in designing, constructing, owning and operating Gas-to-Energy and Cogeneration systems. Bio-Gas currently has 8.5 MW of new renewable power in commercial...

79

The impacts of technology on global unconventional gas supply  

E-Print Network (OSTI)

As energy supplies from known resources are declining, the development of new energy sources is mandatory. One reasonable source is natural gas from unconventional resources. This study focus on three types of unconventional gas resources: coalbeds, tight sands, and shales. Whereas these resources are abundant, they have largely been overlooked and understudied, especially outside of North America. New technologies, including those needed to unlock unconventional gas (UCG) resources, have been acknowledged to be the most significant factor in increasing natural gas supply in the United States. This study evaluates advances in critical technology that will most likely increase supply the most. Advanced technology is one of the main drivers in increasing unconventional natural gas production, as observed in the United States, Canada, and Australia. 3D seismic, horizontal drilling, multilateral completion, water and gel based fracturing, coiled tubing rig, enhanced recovery, and produced water treatments are current important technologies critical in developing unconventional gas resources. More advanced technologies with significant impacts are expected to be available in the next decades. Fit-to-purpose technology reduces the cost to recover gas from unconventional resources. The better the unconventional gas resources are characterized, the better we can tailor specific technology to recover the gas, and less cost are needed. Analogy assumption is a good start in deciding which critical technology to be transferred to undeveloped unconventional reservoirs. If the key properties of two unconventional gas basins or formations are more or less similar, it is expected that the impact of certain technology applied in one basin or formation will resemble the impact to the other basin or formation.

Yanty, Evi

2007-08-01T23:59:59.000Z

80

Successful Oil and Gas Technology Transfer Program Extended to 2015 |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Successful Oil and Gas Technology Transfer Program Extended to 2015 Successful Oil and Gas Technology Transfer Program Extended to 2015 Successful Oil and Gas Technology Transfer Program Extended to 2015 June 23, 2010 - 1:00pm Addthis Washington, D.C. - The Stripper Well Consortium (SWC) - a program that has successfully provided and transferred technological advances to small, independent oil and gas operators over the past nine years - has been extended to 2015 by the U.S. Department of Energy (DOE). An industry-driven consortium initiated in 2000, SWC's goal is to keep "stripper wells" productive in an environmentally safe manner, maximizing the recovery of domestic hydrocarbon resources. The consortium is managed and administered by The Pennsylvania State University on behalf of DOE; the Office of Fossil Energy's (FE) National Energy Technology Laboratory (NETL)

Note: This page contains sample records for the topic "gas revolution technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Market Analysis for Natural Gas Compression Technologies  

Science Conference Proceedings (OSTI)

The natural gas compression market offers huge growth potential for the electric utility industry. As utilities search for ways to expand electricity sales, a combination of economic, environmental, and regulatory factors are further encouraging the use of electric motors in a market that has long been dominated by gas-driven systems. This report provides information and strategies that can help utilities capture a larger share of the gas compression market.

1997-03-21T23:59:59.000Z

82

Improved Gas Sampling Device - Available Technologies - PNNL  

Summary. This is an improved device for gas sampling and analysis in which the design of the device includes features for maximizing the surface area ...

83

NETL: Oil & Natural Gas Technologies Reference Shelf  

NLE Websites -- All DOE Office Websites (Extended Search)

NETL Oil & Natural Gas Technologies Reference Shelf NETL Oil & Natural Gas Technologies Reference Shelf E&P Focus Newsletter Banner The oil and gas exploration and production R&D newsletter, E&P Focus, highlights the latest developments in R&D being carried out by NETL. E&P Focus promotes the widespread dissemination of research results among all types of oil and gas industry stakeholders: producers, researchers, educators, regulators, and policymakers. Each issue provides up-to-date information regarding extramural projects managed under the Strategic Center for Natural Gas and Oil’s traditional oil and gas program, the EPAct Section 999 Program administered by the Research Partnership to Secure Energy for America (RPSEA), and in-house oil and gas research carried out by NETL’s Office of Research and Development.

84

Advanced Gas Storage Concepts: Technologies for the Future  

Science Conference Proceedings (OSTI)

This full text product includes: 1) A final technical report titled Advanced Underground Gas Storage Concepts, Refrigerated-Mined Cavern Storage and presentations from two technology transfer workshops held in 1998 in Houston, Texas, and Pittsburgh, Pennsylvania (both on the topic of Chilled Gas Storage in Mined Caverns); 2) A final technical report titled Natural Gas Hydrates Storage Project, Final Report 1 October 1997 - 31 May 1999; 3) A final technical report titled Natural Gas Hydrates Storage Project Phase II: Conceptual Design and Economic Study, Final Report 9 June - 10 October 1999; 4) A final technical report titled Commerical Potential of Natural Gas Storage in Lined Rock Caverns (LRC) and presentations from a DOE-sponsored workshop on Alternative Gas Storage Technologies, held Feb 17, 2000 in Pittsburgh, PA; and 5) Phase I and Phase II topical reports titled Feasibility Study for Lowering the Minimum Gas Pressure in Solution-Mined Caverns Based on Geomechanical Analyses of Creep-Induced Damage and Healing.

Freeway, Katy (PB-KBB Inc.) [PB-KBB Inc.; Rogers, R.E. (Mississippi State University) [Mississippi State University; DeVries, Kerry L.; Nieland, Joel D.; Ratigan, Joe L.; Mellegard, Kirby D. (RESPEC) [RESPEC

2000-02-01T23:59:59.000Z

85

Natural Gas Compression Technology Improves Transport and Efficiencies,  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Natural Gas Compression Technology Improves Transport and Natural Gas Compression Technology Improves Transport and Efficiencies, Lowers Operating Costs Natural Gas Compression Technology Improves Transport and Efficiencies, Lowers Operating Costs May 10, 2012 - 1:00pm Addthis Washington, DC - An award-winning compressor design that decreases the energy required to compress and transport natural gas, lowers operating costs, improves efficiencies and reduces the environmental footprint of well site operations has been developed by a Massachusetts-based company with support from the U.S. Department of Energy (DOE). OsComp Systems designed and tested the novel compressor design with funding from the DOE-supported Stripper Well Consortium, an industry-driven organization whose members include natural gas and petroleum producers,

86

NETL: Oil & Natural Gas Technologies Reference Shelf  

NLE Websites -- All DOE Office Websites (Extended Search)

Reference Shelf Reference Shelf NETL Oil & Natural Gas Technologies Reference Shelf Solicitations Project Summaries Publications News Releases Software/Databases CDs/DVDs EOR Illustrations Welcome to the NETL Oil & Natural Gas Technologies Reference Shelf. Recently released and in-demand reference materials are available directly from this page using the links below. Online Database of Oil and Natural Gas Research Results Now Available The Knowledge Management Database (KMD) provides easy access to the results of nearly four decades of research supported by the Office of Fossil Energy’s Oil and Natural Gas Program. The database portal provides access to content from dozens of CDs and DVDs related to oil and natural gas research that FE's National Energy Technology Laboratory has published over the years. It

87

Natural Gas Pipeline Research: Best Practices in Monitoring Technology  

E-Print Network (OSTI)

Natural Gas Pipeline Research: Best Practices in Monitoring Technology Energy Systems Research pipelines from outofstate supply basins located in the southwestern United States, the Rocky Mountains, and Canada. These pipelines run throughout the state, including underneath high population areas

88

Bench-Scale Demonstration of Hot-Gas Desulfurization Technology  

SciTech Connect

The U.S. Department of Energy (DOE), Federal Energy Technology Center (FETC), is sponsoring research in advanced methods for controlling contaminants in hot coal gasifier gas (coal-derived fuel-gas) streams of integrated gasification combined-cycle (IGCC) power systems. The hot gas cleanup work seeks to eliminate the need for expensive heat recovery equipment, reduce efficiency losses due to quenching, and minimize wastewater treatment costs.

Jeffrey W. Portzer; Santosh K. Gangwal

1998-12-01T23:59:59.000Z

89

Sensible Solar Fueling Energy Revolution in Georgia | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Sensible Solar Fueling Energy Revolution in Georgia Sensible Solar Fueling Energy Revolution in Georgia Sensible Solar Fueling Energy Revolution in Georgia May 14, 2010 - 3:35pm Addthis Joshua DeLung During his recent commencement address at the Georgia Institute of Technology, Energy Secretary Steven Chu hailed the ingenuity of the engineers responsible for the Industrial Revolution. He noted, however, that the carbon emissions from that pivotal era have caused the world's climate to change drastically. "More frequent heat waves and increased water stress in many areas of the world are predicted," he said. "Rising sea levels and the severity of hurricanes and cyclones will threaten low-lying coastal areas. The climate will change so rapidly that many species, including many people, will have

90

Sensible Solar Fueling Energy Revolution in Georgia | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Sensible Solar Fueling Energy Revolution in Georgia Sensible Solar Fueling Energy Revolution in Georgia Sensible Solar Fueling Energy Revolution in Georgia May 14, 2010 - 3:35pm Addthis Joshua DeLung During his recent commencement address at the Georgia Institute of Technology, Energy Secretary Steven Chu hailed the ingenuity of the engineers responsible for the Industrial Revolution. He noted, however, that the carbon emissions from that pivotal era have caused the world's climate to change drastically. "More frequent heat waves and increased water stress in many areas of the world are predicted," he said. "Rising sea levels and the severity of hurricanes and cyclones will threaten low-lying coastal areas. The climate will change so rapidly that many species, including many people, will have

91

Gas-Fired Distributed Energy Resource Technology Characterizations  

DOE Green Energy (OSTI)

The U. S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE) is directing substantial programs in the development and encouragement of new energy technologies. Among them are renewable energy and distributed energy resource technologies. As part of its ongoing effort to document the status and potential of these technologies, DOE EERE directed the National Renewable Energy Laboratory to lead an effort to develop and publish Distributed Energy Technology Characterizations (TCs) that would provide both the department and energy community with a consistent and objective set of cost and performance data in prospective electric-power generation applications in the United States. Toward that goal, DOE/EERE - joined by the Electric Power Research Institute (EPRI) - published the Renewable Energy Technology Characterizations in December 1997.As a follow-up, DOE EERE - joined by the Gas Research Institute - is now publishing this document, Gas-Fired Distributed Energy Resource Technology Characterizations.

Goldstein, L.; Hedman, B.; Knowles, D.; Freedman, S. I.; Woods, R.; Schweizer, T.

2003-11-01T23:59:59.000Z

92

NETL: News Release - DOE's Early Investment in Shale Gas Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

2, 2011 2, 2011 DOE's Early Investment in Shale Gas Technology Producing Results Today Washington, DC - A $92 million research investment in the 1970s by the U.S. Department of Energy (DOE) is today being credited with technological contributions that have stimulated development of domestic natural gas from shales. The result: more U.S. jobs, increased energy security, and higher revenues for states and the Federal Government. Spurred by the technological advancements resulting from this investment, U.S. shale gas production continues to grow, amounting to more than 8 billion cubic feet per day, or about 14 percent of the total volume of dry natural gas produced in the United States. DOE's Energy Information Administration (EIA) projects that the shale gas share of U.S. natural gas production will reach 45 percent by 2035. The EIA also projects that 827 trillion cubic feet of natural gas is now recoverable from U.S. shales using currently available technology-an increase of nearly 500 trillion cubic feet over earlier estimates.

93

New Membrane Technology Boosts Efficiency in Industrial Gas Processes  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Membrane Technology and Membrane Technology and Research, Inc. (MTR), based in Menlo Park, CA, is a privately- owned developer, manufacturer, and supplier of customized membrane process solutions. Currently, the company's principal membrane products are * VaporSep® systems to remove organic vapors from air and nitrogen * NitroSep TM and fuel gas conditioning systems for natural gas treatment * Hydrogen recovery systems for refinery and other applications MTR's current R&D is extending use of membranes to carbon sequestration and biofuels separations. www.mtrinc.com New Membrane Technology Boosts Efficiency in Industrial Gas Processes Challenge Membrane technology was first commercialized in the 1960s and 1970s for well-known applications such as water filtration

94

Gas Turbine Technology, Part A: Overview, Cycles, and Thermodynamic Performance  

E-Print Network (OSTI)

The growth of cogeneration technology has accelerated in recent years, and it is estimated that fifty percent of the cogeneration market will involve gas turbines. To several energy engineers, gas turbine engines present a new and somewhat perplexing prime mover. This paper (Parts A & B) intends to treat the area of gas turbine technology to provide a broad overview and understanding of this subject. This paper (Part A) covers the basics of gas turbine cycles, thermodynamics and performance considerations that are important in cogeneration. Simple, regenerative and combined cycles will be discussed, along with important performance losses (inlet and exit losses and part load operation). Waste heat recovery, as it relates to gas turbine performance, will also be discussed. This paper will provide the basic equations enabling quick computations to be made. Topics such as typical efficiencies, evaporative cooling costs, emissions, etc. will be discussed. A brief discussion of advanced cycles such as the dual fluid cycle and close cycles is also made.

Meher-Homji, C. B.; Focke, A. B.

1985-05-01T23:59:59.000Z

95

Technology Opportunities to Reduce U.S. Greenhouse Gas Emissions  

Science Conference Proceedings (OSTI)

This report serves as the technology basis of a needed national climate change technology strategy, with the confidence that a strong technology R&D program will deliver a portfolio of technologies with the potential to provide very substantial greenhouse gas emission reductions along with continued economic growth. Much more is needed to define such a strategy, including identification of complementary deployment policies and analysis to support the seeping and prioritization of R&D programs. A national strategy must be based upon governmental, industrial, and academic partnerships.

Not Available

1997-10-01T23:59:59.000Z

96

Technology Key to Harnessing Natural Gas Potential | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technology Key to Harnessing Natural Gas Potential Technology Key to Harnessing Natural Gas Potential Technology Key to Harnessing Natural Gas Potential July 18, 2012 - 3:52pm Addthis Deputy Secretary Daniel Poneman tours Proinlosa Energy Corp. in Houston, Texas. Proinlosa is a company in the wind turbine manufacturing supply chain that develops tower parts and has benefitted from the Production Tax Credit (PTC). | Photo courtesy of Keri Fulton. Deputy Secretary Daniel Poneman tours Proinlosa Energy Corp. in Houston, Texas. Proinlosa is a company in the wind turbine manufacturing supply chain that develops tower parts and has benefitted from the Production Tax Credit (PTC). | Photo courtesy of Keri Fulton. Daniel B. Poneman Daniel B. Poneman Deputy Secretary of Energy What does this project do? Builds on President Obama's call for a new era for American energy

97

Advanced natural gas fuel technologies for military installations. Final report  

SciTech Connect

Energy conservation efforts reduced Department of Defense (DoD) fossil fuel consumption considerably between FYX5 and FY9 I, yet electricity consumption increased. Electricity consumption accounts for only one-third of DoD energy use, but over half of DoD energy costs. In addition, the production of electricity at coal or nuclear plants often creates environmental concerns, while the use of clean-burning natural gas does not; its use can help DoD bases comply with increasingly stringent environmental regulations. Recent developments in natural gas-fired technologies also demonstrate improved efficiency and productivity at lower costs. This report identifies state-of-the-art and emerging natural gas utilization technologies with potential application on DoD installations. This report describes various technologies that have potential residential, commercial, or industrial applications on DoD installations. Applications include heating, cooling, power generation, food preparation, and several industrial processes.

Savoie, M.J.; Freeman, P.M.; Blazek, C.F.; Potts, N.L.

1994-09-01T23:59:59.000Z

98

Emerging Energy-Efficiency and Greenhouse Gas Mitigation Technologies for  

NLE Websites -- All DOE Office Websites (Extended Search)

Emerging Energy-Efficiency and Greenhouse Gas Mitigation Technologies for Emerging Energy-Efficiency and Greenhouse Gas Mitigation Technologies for the Pulp and Paper Industry Title Emerging Energy-Efficiency and Greenhouse Gas Mitigation Technologies for the Pulp and Paper Industry Publication Type Report Year of Publication 2012 Authors Kong, Lingbo, Ali Hasanbeigi, and Lynn K. Price Date Published 12/2012 Publisher Lawrence Berkeley National Laboratory Keywords emerging technologies, energy efficiency, ghg, Low Emission & Efficient Industry, pulp and paper Abstract The pulp and paper industry ranks fourth in terms of energy consumption among industries worldwide. Globally, the pulp and paper industry accounted for approximately 5 percent of total world industrial final energy consumption in 2007, and contributed 2 percent of direct carbon dioxide (CO2)emissions from industry. Worldwide pulp and paper demand and production are projected to increase significantly by 2050, leading to an increase in this industry's absolute energy use and greenhouse gas (GHG) emissions. Development of new energy-efficiency and GHG mitigation technologies and their deployment in the market will be crucial for the pulp and paper industry's mid- and long-term climate change mitigation strategies. This report describes the industry's processes and compiles available information on the energy savings, environmental and other benefits, costs, commercialization status, and references for 36 emerging technologies to reduce the industry's energy use and GHG emissions. Although studies from around the world identify a variety of sector-specific and cross-cutting energy-efficiency technologies that have already been commercialized for the pulp and paper industry, information is scarce and/or scattered regarding emerging or advanced energy-efficiency and low-carbon technologies that are not yet commercialized. The purpose of this report is to provide engineers, researchers, investors, paper companies, policy makers, and other interested parties with easy access to a well-structured resource of information on these technologies.

99

Clean Cities: Natural Gas Vehicle Technology Forum 2014 Meeting  

NLE Websites -- All DOE Office Websites (Extended Search)

Forum 2014 Meeting Forum 2014 Meeting Natural Gas Vehicle Technology Form (NGVTF) logo The Natural Gas Vehicle Technology Forum (NGVTF) will hold a meeting for stakeholders on Jan. 14-15, 2014, at Brookhaven National Laboratory in Upton, New York. Meeting Details Date: Jan. 14-15, 2014 | Icon of a calendar. Add to my calendar Location: Brookhaven National Laboratory 33 Lewis Rd. Upton, NY 11961 The National Renewable Energy Laboratory is hosting this meeting in partnership with the U.S. Department of Energy and the California Energy Commission to support the development and deployment of commercially competitive natural gas engines, vehicles, and infrastructure. NGVTF is free and open to stakeholders, so join the conversation about natural gas engines, vehicles, infrastructure, and codes and standards.

100

Engineering analysis of biomass gasifier product gas cleaning technology  

DOE Green Energy (OSTI)

For biomass gasification to make a significant contribution to the energy picture in the next decade, emphasis must be placed on the generation of clean, pollutant-free gas products. This reports attempts to quantify levels of particulated, tars, oils, and various other pollutants generated by biomass gasifiers of all types. End uses for biomass gases and appropriate gas cleaning technologies are examined. Complete systems analysis is used to predit the performance of various gasifier/gas cleanup/end use combinations. Further research needs are identified. 128 refs., 20 figs., 19 tabs.

Baker, E.G.; Brown, M.D.; Moore, R.H.; Mudge, L.K.; Elliott, D.C.

1986-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "gas revolution technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Toward Production From Gas Hydrates: Current Status, Assessment of Resources, and Simulation-Based Evaluation of Technology and Potential  

E-Print Network (OSTI)

www.netl.doe.gov/technologies/oil-gas/publications/Hydrates/Exploration priorities for marine gas hydrates, Fire In Thewww.netl.doe.gov/technologies/oil-gas/publications/Hydrates/

Moridis, George J.

2008-01-01T23:59:59.000Z

102

Evaluating the income and employment impacts of gas cooling technologies  

SciTech Connect

The purpose of this study is to estimate the potential employment and income benefits of the emerging market for gas cooling products. The emphasis here is on exports because that is the major opportunity for the U.S. heating, ventilating, and air-conditioning (HVAC) industry. But domestic markets are also important and considered here because without a significant domestic market, it is unlikely that the plant investments, jobs, and income associated with gas cooling exports would be retained within the United States. The prospects for significant gas cooling exports appear promising for a variety of reasons. There is an expanding need for cooling in the developing world, natural gas is widely available, electric infrastructures are over-stressed in many areas, and the cost of building new gas infrastructure is modest compared to the cost of new electric infrastructure. Global gas cooling competition is currently limited, with Japanese and U.S. companies, and their foreign business partners, the only product sources. U.S. manufacturers of HVAC products are well positioned to compete globally, and are already one of the faster growing goods-exporting sectors of the U.S. economy. Net HVAC exports grew by over 800 percent from 1987 to 1992 and currently exceed $2.6 billion annually (ARI 1994). Net gas cooling job and income creation are estimated using an economic input-output model to compare a reference case to a gas cooling scenario. The reference case reflects current policies, practices, and trends with respect to conventional electric cooling technologies. The gas cooling scenario examines the impact of accelerated use of natural gas cooling technologies here and abroad.

Hughes, P.J. [Oak Ridge National Lab., TN (United States); Laitner, S.

1995-03-01T23:59:59.000Z

103

Technology Opportunities to Reduce U.S. Greenhouse Gas Emissions  

SciTech Connect

The rise in greenhouse gas emissions from fossil fuel combustion and industrial and agricultural activities has aroused international concern about the possible impacts of these emissions on climate. Greenhouse gases--mostly carbon dioxide, some methane, nitrous oxide and other trace gases--are emitted to the atmosphere, enhancing an effect in which heat reflected from the earth's surface is kept from escaping into space, as in a greenhouse. Thus, there is concern that the earth's surface temperature may rise enough to cause global climate change. Approximately 90% of U.S. greenhouse gas emissions from anthropogenic sources come from energy production and use, most of which are a byproduct of the combustion of fossil fuels. On a per capita basis, the United States is one of the world's largest sources of greenhouse gas emissions, comprising 4% of the world's population, yet emitting 23% of the world's greenhouse gases. Emissions in the United States are increasing at around 1.2% annually, and the Energy Information Administration forecasts that emissions levels will continue to increase at this rate in the years ahead if we proceed down the business-as-usual path. President Clinton has presented a two-part challenge for the United States: reduce greenhouse gas emissions and grow the economy. Meeting the challenge will mean that in doing tomorrow's work, we must use energy more efficiently and emit less carbon for the energy expended than we do today. To accomplish these goals, President Clinton proposed on June 26, 1997, that the United States ''invest more in the technologies of the future''. In this report to Secretary of Energy Pena, 47 technology pathways are described that have significant potential to reduce carbon dioxide emissions. The present study was completed before the December 1997 United Nations Framework Convention on Climate Change and is intended to provide a basis to evaluate technology feasibility and options to reduce greenhouse gas emissions. These technology pathways (which are described in greater detail in Appendix B, Technology Pathways) address three areas: energy efficiency, clean energy, and carbon sequestration (removing carbon from emissions and enhancing carbon storage). Based on an assessment of each of these technology pathways over a 30-year planning horizon, the directors of the Department of Energy's (DOE's) national laboratories conclude that success will require pursuit of multiple technology pathways to provide choices and flexibility for reducing greenhouse gas emissions. Advances in science and technology are necessary to reduce greenhouse gas emissions from the United States while sustaining economic growth and providing collateral benefits to the nation.

National Lab Directors, . .

2001-04-05T23:59:59.000Z

104

Technology Opportunities to Reduce U.S. Greenhouse Gas Emissions  

SciTech Connect

The rise in greenhouse gas emissions from fossil fuel combustion and industrial and agricultural activities has aroused international concern about the possible impacts of these emissions on climate. Greenhouse gases--mostly carbon dioxide, some methane, nitrous oxide and other trace gases--are emitted to the atmosphere, enhancing an effect in which heat reflected from the earth's surface is kept from escaping into space, as in a greenhouse. Thus, there is concern that the earth's surface temperature may rise enough to cause global climate change. Approximately 90% of U.S. greenhouse gas emissions from anthropogenic sources come from energy production and use, most of which are a byproduct of the combustion of fossil fuels. On a per capita basis, the United States is one of the world's largest sources of greenhouse gas emissions, comprising 4% of the world's population, yet emitting 23% of the world's greenhouse gases. Emissions in the United States are increasing at around 1.2% annually, and the Energy Information Administration forecasts that emissions levels will continue to increase at this rate in the years ahead if we proceed down the business-as-usual path. President Clinton has presented a two-part challenge for the United States: reduce greenhouse gas emissions and grow the economy. Meeting the challenge will mean that in doing tomorrow's work, we must use energy more efficiently and emit less carbon for the energy expended than we do today. To accomplish these goals, President Clinton proposed on June 26, 1997, that the United States ''invest more in the technologies of the future''. In this report to Secretary of Energy Pena, 47 technology pathways are described that have significant potential to reduce carbon dioxide emissions. The present study was completed before the December 1997 United Nations Framework Convention on Climate Change and is intended to provide a basis to evaluate technology feasibility and options to reduce greenhouse gas emissions. These technology pathways (which are described in greater detail in Appendix B, Technology Pathways) address three areas: energy efficiency, clean energy, and carbon sequestration (removing carbon from emissions and enhancing carbon storage). Based on an assessment of each of these technology pathways over a 30-year planning horizon, the directors of the Department of Energy's (DOE's) national laboratories conclude that success will require pursuit of multiple technology pathways to provide choices and flexibility for reducing greenhouse gas emissions. Advances in science and technology are necessary to reduce greenhouse gas emissions from the United States while sustaining economic growth and providing collateral benefits to the nation.

National Lab Directors, . .

2001-04-05T23:59:59.000Z

105

Gas Analysis Of Geothermal Fluid Inclusions- A New Technology For  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » Gas Analysis Of Geothermal Fluid Inclusions- A New Technology For Geothermal Exploration Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Report: Gas Analysis Of Geothermal Fluid Inclusions- A New Technology For Geothermal Exploration Details Activities (7) Areas (6) Regions (0) Abstract: To increase our knowledge of gaseous species in geothermal systems by fluid inclusion analysis in order to facilitate the use of gas analysis in geothermal exploration. The knowledge of gained by this program can be applied to geothermal exploration, which may expand geothermal

106

A Revolution in Lighting  

NLE Websites -- All DOE Office Websites (Extended Search)

Advancing the Science and Technology of Materials and Reactors * Pushing the Envelope on LED and VCSEL Efficiency and Color * Developing the Smart Luminaire FY02 Continuation...

107

FY-2001 Accomplishments in Off-gas Treatment Technology Development  

SciTech Connect

This report summarizes the efforts funded by the Tank Focus Area to investigate nitrogen oxide (NOx) destruction (a.k.a. deNOx) technologies and off-gas scrubber system designs. The primary deNOx technologies that were considered are staged combustion (a.k.a. NOx reburning), selective catalytic reduction, selective non-catalytic reduction, and steam reformation. After engineering studies and a team evaluation were completed, selective catalytic reduction and staged combustion were considered the most likely candidate technologies to be deployed in a sodium-bearing waste vitrification facility. The outcome of the team evaluation factored heavily in the establishing a baseline configuration for off-gas and secondary waste treatment systems.

Marshall, Douglas William

2001-09-01T23:59:59.000Z

108

Revolution Environmental | Open Energy Information  

Open Energy Info (EERE)

Revolution Environmental Revolution Environmental Jump to: navigation, search Name Revolution Environmental Place Chicago, Illinois Zip 60654 Sector Efficiency, Services Product Chicago-based firm that provides a range of environmental related services such as energy efficiency and electrical vehicle infrastructure. Coordinates 41.88415°, -87.632409° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":41.88415,"lon":-87.632409,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

109

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Mechanisms by Which Methane Gas and Methane Hydrate Coexist In Ocean Sediments Mechanisms by Which Methane Gas and Methane Hydrate Coexist In Ocean Sediments Mechanisms by Which Methane Gas and Methane Hydrate Coexist In Ocean Sediments Authors: Maša Prodanovic (speaker), Javad Behseresht, Yao Peng, Steven L. Bryant, Antone K. Jain and Ruben Juanes Venue: 2008 Offshore Technology Conference, Houston, Texas, May 5-8, 2008 ( http://www.spe.org and http://www.smenet.org [external sites] ) Abstract: A spectrum of behavior is encountered in methane hydrate provinces, especially ocean sediments, ranging from essentially static accumulations where the pore space is filled with hydrate and brine, to active seeps where hydrate and methane gas phase co-exist in the hydrate stability zone (HSZ). The grain-scale models of drainage and fracturing presented demonstrate key processes involved in pressure-driven gas phase invasion of a sediment. A novel extension of invasion percolation to infinite-acting, physically representative networks is used to evaluate the connectivity of water in a gas-drained sediment. A novel implementation of the level set method (LSM) is used to determine the capillarity-controlled displacement of brine by gas from sediment and from fractures within the sediment. The discrete element method (DEM) is extended to model the coupling between the pore fluids and the solid, and thereby predict the onset of sediment fracturing by gas phase pressure under in situ loading conditions. The DEM grain mechanics model accounts for the different pressure of brine and methane gas in a “membrane” two-fluid model. The fluid-fluid configuration from LSM can be mapped directly to the pore space in DEM, thereby coupling the drainage and mechanics models. The type of behavior that can emerge from the coupled processes is illustrated with an extended LSM model. The extension computes grain displacement by the gas phase with a simple kinematic rule.

110

Preparation of environmental analyses for synfuel and unconventional gas technologies  

DOE Green Energy (OSTI)

Government agencies that offer financial incentives to stimulate the commercialization of synfuel and unconventional gas technologies usually require an analysis of environmental impacts resulting from proposed projects. This report reviews potentially significant environmental issues associated with a selection of these technologies and presents guidance for developing information and preparing analyses to address these issues. The technologies considered are western oil shale, tar sand, coal liquefaction and gasification, peat, unconventional gas (western tight gas sands, eastern Devonian gas shales, methane from coal seams, and methane from geopressured aquifers), and fuel ethanol. Potentially significant issues are discussed under the general categories of land use, air quality, water use, water quality, biota, solid waste disposal, socioeconomics, and health and safety. The guidance provided in this report can be applied to preparation and/or review of proposals, environmental reports, environmental assessments, environmental impact statements, and other types of environmental analyses. The amount of detail required for any issue discussed must, by necessity, be determined on a case-by-case basis.

Reed, R.M. (ed.)

1982-09-01T23:59:59.000Z

111

GE power generation technology challenges for advanced gas turbines  

SciTech Connect

The GE Utility ATS is a large gas turbine, derived from proven GEPG designs and integrated GEAE technology, that utilizes a new turbine cooling system and incorporates advanced materials. This system has the potential to achieve ATS objectives for a utility sized machine. Combined with use of advanced Thermal Barrier Coatings (TBC`s), the new cooling system will allow higher firing temperatures and improved cycle efficiency that represents a significant improvement over currently available machines. Developing advances in gas turbine efficiency and emissions is an ongoing process at GEPG. The third generation, ``F`` class, of utility gas turbines offers net combined cycle efficiencies in the 55% range, with NO{sub x} programs in place to reduce emissions to less than 10 ppM. The gas turbines have firing temperatures of 2350{degree}F, and pressure ratios of 15 to 1. The turbine components are cooled by air extracted from the cycle at various stages of the compressor. The heat recovery cycle is a three pressure steam system, with reheat. Throttle conditions are nominally 1400 psi and 1000{degree}F reheat. As part of GEPG`s ongoing advanced power generation system development program, it is expected that a gas fired advanced turbine system providing 300 MW power output greater than 58% net efficiency and < 10 ppM NO{sub x} will be defined. The new turbine cooling system developed with technology support from the ATS program will achieve system net efficiency levels in excess of 60%.

Cook, C.S.; Nourse, J.G.

1993-11-01T23:59:59.000Z

112

Biomass--The next revolution in surfactants?  

Science Conference Proceedings (OSTI)

Neil A. Burns examines this potential player in the surfactant valuechain. Biomass--The next revolution in surfactants? Inform Magazine Inform Archives Surfactants and Detergents Biomass--The next revolution in surfactants? Neil A. Burn

113

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Decreasing Air Emission Impacts From Oil and Gas Development Decreasing Air Emission Impacts From Oil and Gas Development Decreasing Air Emission Impacts From Oil and Gas Development Authors: Charles B. McComas, PE; J. Daniel Arthur, PE; Gerry Baker; G. Lee Moody; and David B. Cornue, PG, CHMM Venue: American Chemical Society (53rd Pentasectional Meeting) – Halliburton Energy Services Technology Center, Duncan, OK, March 8, 2008 (http://www.acs.org [external site]) Abstract: Research funded by the United States Department of Energy’s National Energy Technology Laboratory and conducted under the direction of the Interstate Oil and Gas Compact Commission has examined concerns related to air emissions resulting from domestic onshore oil and gas exploration and production operations. Current air issues such as ambient air quality standards and non-attainment areas, regulatory compliance and regional inconsistencies, as well as global climate change and carbon sequestration are a few of the subjects perceived to represent potential barriers to energy development. The topic of air quality and how it relates to onshore oil and gas exploration and production activities is examined from the position of environmental sustainability. These concerns can be addressed through reasonable and prudent practices that industry may implement in order to avoid, minimize, or mitigate air emissions. Additionally, air emissions parameters that are not currently regulated (e.g.: CH4 and CO2) may become the subject of increased concern in the future and, therefore, add to the list of issues facing oil and gas exploration and production. Suggestions for further research opportunities with the potential to benefit responsible energy resource development are also presented.

114

Technical Progress Report for the Gas Storage Technology Consortium  

Science Conference Proceedings (OSTI)

Gas storage is a critical element in the natural gas industry. Producers, transmission and distribution companies, marketers, and end users all benefit directly from the load balancing function of storage. The unbundling process has fundamentally changed the way storage is used and valued. As an unbundled service, the value of storage is being recovered at rates that reflect its value. Moreover, the marketplace has differentiated between various types of storage services, and has increasingly rewarded flexibility, safety, and reliability. The size of the natural gas market has increased and is projected to continue to increase towards 30 trillion cubic feet (TCF) over the next 10 to 15 years. Much of this increase is projected to come from electric generation, particularly peaking units. Gas storage, particularly the flexible services that are most suited to electric loads, is critical in meeting the needs of these new markets. In order to address the gas storage needs of the natural gas industry, an industry-driven consortium was created--the Gas Storage Technology Consortium (GSTC). The objective of the GSTC is to provide a means to accomplish industry-driven research and development designed to enhance operational flexibility and deliverability of the Nation's gas storage system, and provide a cost effective, safe, and reliable supply of natural gas to meet domestic demand. This report addresses the activities for the quarterly period of July 1, 2005 through September 30, 2005. During this time period efforts were directed toward (1) receiving proposals in response to the RFP, and (2) organizing and hosting the proposal selection meeting on August 30-31, 2005.

Joel L. Morrison

2005-10-24T23:59:59.000Z

115

Technical Progress Report for the Gas Storage Technology Consortium  

Science Conference Proceedings (OSTI)

Gas storage is a critical element in the natural gas industry. Producers, transmission and distribution companies, marketers, and end users all benefit directly from the load balancing function of storage. The unbundling process has fundamentally changed the way storage is used and valued. As an unbundled service, the value of storage is being recovered at rates that reflect its value. Moreover, the marketplace has differentiated between various types of storage services, and has increasingly rewarded flexibility, safety, and reliability. The size of the natural gas market has increased and is projected to continue to increase towards 30 trillion cubic feet (TCF) over the next 10 to 15 years. Much of this increase is projected to come from electric generation, particularly peaking units. Gas storage, particularly the flexible services that are most suited to electric loads, is critical in meeting the needs of these new markets. In order to address the gas storage needs of the natural gas industry, an industry-driven consortium was created--the Gas Storage Technology Consortium (GSTC). The objective of the GSTC is to provide a means to accomplish industry-driven research and development designed to enhance operational flexibility and deliverability of the Nation's gas storage system, and provide a cost effective, safe, and reliable supply of natural gas to meet domestic demand. This report addresses the activities for the quarterly period of October 1, 2005 through December 31, 2005. Activities during this time period were: (1) Nomination and election of Executive Council members for 2006-07 term, (2) Release the 2006 GSTC request-for-proposals (RFP), (3) Recruit and invoice membership for FY2006, (4) Improve communication efforts, and (5) Continue planning the GSTC spring meeting in San Diego, CA on February 21-22, 2006.

Joel L. Morrison; Sharon L. Elder

2006-02-27T23:59:59.000Z

116

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation  

NLE Websites -- All DOE Office Websites (Extended Search)

Designing a Pilot-Scale Experiment for the Production of Natural Gas Hydrates and Sequestration of CO2 in Geologic Reservoirs Designing a Pilot-Scale Experiment for the Production of Natural Gas Hydrates and Sequestration of CO2 in Geologic Reservoirs Designing a Pilot-Scale Experiment for the Production of Natural Gas Hydrates and Sequestration of CO2 in Geologic Reservoirs Authors: Mark White and Pete McGrail Venue: The 9th International Conference on Greenhouse Gas Technologies will be held November 16-20, 2008 at The Omni Shoreham Hotel in Washington, DC. The Conference will be organized by MIT in collaboration with the IEA Greenhouse Gas R&D Programme (IEA GHG), with major sponsorship from the US Department of Energy. http://mit.edu/ghgt9/ . Abstract: Under high pressure and low temperature conditions small nonpolar molecules (typically gases) can combine with water to form crystalline structures known as clathrate hydrates. Methane (CH4) and carbon dioxide (CO2) form nearly identical clathrate structures (sI), with the CO2 hydrate being thermodynamically favored. Vast accumulations of methane hydrates have been found in suboceanic deposits and beneath the arctic permafrost. Because of the large volumetric storage densities, clathrate hydrates on the deep ocean floor have been suggested as a sequestration option for CO2. Alternatively, CO2 hydrates can be formed in the geologic settings of naturally occurring accumulations of methane hydrates. Global assessments of natural gas resources have shown that gas hydrate resources exceed those of conventional resources, which is indicative of the potential for clathrate hydrate sequestration of CO2. Recovery of natural gas from hydrate-bearing geologic deposits has the potential for being economically viable, but there remain significant technical challenges in converting these natural accumulations into a useable resource. Currently, conventional methods for producing methane hydrates from geologic settings include depressurization, thermal stimulation, and inhibitor injection. Although CO2 clathrates generally are not naturally as abundant as those of CH4, their occurrence forms the foundation of an unconventional approach for producing natural gas hydrates that involves the exchange of CO2 with CH4 in the hydrate structure. This unconventional concept has several distinct benefits over the conventional methods: 1) the heat of formation of CO2 hydrate is greater than the heat of dissociation of CH4 hydrate, providing a low-grade heat source to support additional methane hydrate dissociation, 2) exchanging CO2 with CH4 will maintain the mechanical stability of the geologic formation, and 3) the process is environmentally friendly, providing a sequestration mechanism for the injected CO2. The exchange production technology would not be feasible without the favorable thermodynamics of CO2 hydrates over CH4 hydrates. This situation yields challenges for the technology to avoid secondary hydrate formation and clogging of the geologic repository. Laboratory-scale experiments have demonstrated the feasibility of producing natural gas and sequestering CO2 using the direct exchange technology in geologic media. These experiments have duplicated numerically using the STOMP-HYD simulator, which solves the nonisothermal multifluid flow and transport equations for mixed hydrate systems in geologic media. This paper describes the design (via numerical simulation) of a pilot-scale demonstration test of the CO2 exchange production and sequestration technology for a geologic setting beneath the arctic permafrost, involving a gas-hydrate interval overlying a free-gas interval (i.e., Class 1 Hydrate Accumulation).

117

Development of Micro-Pattern Gas Detectors Technologies  

E-Print Network (OSTI)

The proposed R&D collaboration, RD51, aims at facilitating the development of advanced gas-avalanche detector technologies and associated electronic-readout systems, for applications in basic and applied research. Advances in particle physics have always been enabled by parallel advances in radiation-detector technology. Radiation detection and imaging with gas-avalanche detectors, capable of economically covering large detection volumes with a low material budget, have been playing an important role in many fields. Besides their widespread use in particle-physics and nuclear-physics experiments, gaseous detectors are employed in many other fields: astro-particle research and applications such as medical imaging, material science, and security inspection. While extensively employed at the LHC, RHIC, and other advanced HEP experiments, present gaseous detectors (wire-chambers, drift-tubes, resistive-plate chambers and others) have limitations which may prevent their use in future experiments. Present tec...

Gregor, I; Richer, J; Santos, D; Barsuk, S; Bencze, G; Hamar, G; Shah, M K; Catanesi, M G; Colaleo, A; Maggi, M; Loddo, F; Poli lener, M; Bagliesi, M; Temming, K K; Richter, R; Lahonde-hamdoun, C; Dris, M; Geralis, T; Kiss, G; Chechik, R; Ochi, A; Hartjes, F; Lopes, I M; Deshpande, A; Franz, A; Ketzer, B F; Dabrowski, W; Ferreira, A; Bastos de oliveira, C A; Ferreira natal da luz, P H; Plazas de pinzon, M C; Hillemanns, H; Tsarfati, T; Voss, B J R; Dafni, T; Carmona martinez, J M; Stocchi, A; Dinu, N; Bezshyyko, O; Bernard, D R L; Semeniouk, I; Giebels, B; Frotin, M; Marton, K; De leo, R; De lucia, E; Alviggi, M; Bellerive, A; Zimmermann, S U; Martin-albo simon, J; Serra diaz cano, L; Derre, J; Giomataris, I; Peyaud, A; Schune, P; Delagnes, E; Delbart, A; Wang, W; Markou, A; Edo, Y; Hessey, N P; Neves, F F; Solovov, V; Xia, L; Stoll, S; Gasik, P J; Sampsonidis, D; Mindur, B; Zielinska, A Z; Sauli, F; Watts, D A; Calapez de albuquerque veloso, J F; Kahlaoui, N; Sharma, A; Wotschack, J; Bilevych, Y; Zenker, K; Cebrian guajardo, S V; Luzon marco, G M; Dalmaz, A E; Geffroy, N A; Guillaudin, O J H; Cornebise, P; Lounis, A; Bruel, P J; Ruan, M; Haddad, Y; Laszlo, A; Mukerjee, K; Nappi, E; Nuzzo, S V; Cafagna, F S; Bencivenni, G; Cecchi, R; Tessarotto, F; Levorato, S; Munoz-vidal, J; Sorel, M; Liubarsky, I; Riallot, M; Jeanneau, F; Nizery, F G; Maltezos, S; Tsipolitis, G; Kyriakis, A; Lyashenko, A; Van der graaf, H; Alfonsi, M; Alexa, C; Liyanage, N; Dehmelt, K; Hemmick, T K; Polychronakos, V; Purschke, M L; Ball, M; Cisbani, E; Garibaldi, F; Koperny, S Z; Mora mas, F; Das neves dias carramate, L F; Formenti, F; Van stenis, M; Desch, K K; Soyk, D; Segui iglesia, L; Gonzalez diaz, D; Garcia pascual, J A; Adloff, C J; Chefdeville, M; Vouters, G; Poilleux, P R; Ranieri, A; Quinto, M; Lami, S; Shekhtman, L; Dolgov, A; Bamberger, A; Herten, G; Landgraf, U; Kortner, O; Ferrero, A; Legou, P; Aune, S; Attie, D M; Bressler, S; Tsigaridas, S; Surrow, B; Gnanvo, K A K; Feege, N M; Woody, C L; Boehmer, F V; Bhattacharya, S; Capogni, M; Hohlmann, M; Veenhof, R J; Tapan, I; Dangendorf, V; Castro serrato, H; De oliveira, R; Ropelewski, L; Franchino, S; Behnke, T; Diago ortega, A; Gracia garza, J; Peltier, F; Bourrion, O R; Boudry, V; Radicioni, E; Lai, A; Shemyakina, E; Gomez cadenas, J J; Yahlali haddou, N; Giganon, A E; Titov, M; Galan lacarra, J A; Komai, H; Van bakel, N A; Tchepel, V; Repond, J O; Metcalfe, J E; Li, Y; Kourkoumelis, C; Majumdar, N; Kowalski, T; Fiutowski, T; Da rocha azevedo, C D; Trabelsi, A; Riegler, W; Killenberg, M; Lupberger, M; Rosemann, C G; Iguaz gutierrez, F J; Drancourt, C; Samarati, J; Mayet, F; Geerebaert, Y; Fodor, Z P; De robertis, G; Murtas, F; Domenici, D; Morello, G; Scribano memoria, A; Dalla torre, S; Gregori, M; Menon, G; Bondar, A; Buzulutskov, A; Schwegler, P; Ferrario, P; Lorca galindo, D; Alvarez puerta, V; Colas, P M A; Neyret, D; Zito, M; Ferrer ribas, E; Procureur, S; Gazis, E; Breskin, A; Schon, R; Martoiu, V S; Dorheim, S; Petridou, C; Mukhopadhyay, S; Urciuoli, G M; Bucciantonio, M; Bhopatkar, V S; Biagi, S F; Ji, X; Capeans garrido, M D M; Schindler, H; Kaminski, J; Krautscheid, T; Lippmann, C; Arora, R; Garcia irastorza, I; Tomas alquezar, A; Karyotakis, Y; Jacquemier, J N; Puill, V; Wicek, F B; Burmistrov, L; Singh, K P; Pugliese, G; Berardi, V; Oldeman, R; Felici, G; Mannocchi, G; Iengo, P; Giordano, R; Latino, G; Kroha, H; Lux, T; Monrabal-capilla, F; Kunne, F; Charles, G; Chaus, A; Alexopoulos, T; Daskalakis, G; Yu, B; Xiao, Z; Tzanakos, G; Frullani, S; Toledo alarcon, J F; Sahin, O; Kalkan, Y; Giboni, K; Klempt, W; Muller, H; Krieger, C; Herrera munoz, D C; Gaglione, R; Breton, D R; Bhattacharyya, S; Abbrescia, M; Erriquez, O; Paticchio, V; Cardini, A; Aloisio, A; Turini, N; Bressan, A; Tikhonov, Y; Dixit, M S; Schumacher, M; Simon, F R; Nowak, S; Sforza, F; Sanchez nieto, F J; Herlant, S; Glonti, G; Fanourakis, G; Varga, D; Arazi, L; Homma, Y; Timmermans, J; Koppert, W; Ferreira marques, R; Fonte, P; Underwood, D G; Semertzidis, Y K; Azmoun, B; Fassouliotis, D; Wiacek, P; Esteve bosch, R; Fernandes dos santos, C A; Dos santos covita, D; Monteiro da silva, A L; Marques ferreira dos santos, J

118

Sizzling Qatar boom sparked by foreign money, technology, and gas  

Science Conference Proceedings (OSTI)

International oil companies have collected advanced upstream and downstream technology and focused it on the small Persian Gulf emirate of Qatar, a roughly 110 mile long by 50 mile wide, thumb-like peninsula that juts out from Saudi Arabia. The emirate, in a burst of enlightened self interest, has opened its doors to international companies and is now riding a wave of foreign investment and new technology to major increases in oil, natural gas, and petrochemical production. The largest natural gas reserve in the world is under Qatari waters and is the driver for the activity that includes two LNG plants. Qatar has proven that you don`t need crude oil in the Persian Gulf to be important. Activities are discussed.

Aalund, L.R.

1998-04-27T23:59:59.000Z

119

Assessment of Gas Turbine Compressor Health Monitoring Technologies: Interim Report  

Science Conference Proceedings (OSTI)

A major risk item in gas turbine machinery is compressor rotor/stator blade failure, which can lead to the downstream propagation of components through the compressor. Several events of this nature have occurred over the last few years, in some cases causing catastrophic damage to the entire compressor. In response to these issues, a number of compressor monitoring approaches have been proposed, with different degrees of commercial penetration and technological readiness. The simplest approach is to ...

2013-12-18T23:59:59.000Z

120

The eCommerce Revolution  

Science Conference Proceedings (OSTI)

This paper looks ahead to the mid-term and longer-term effects of the eCommerce revolution. We are in the last few years of the domination of the industrial economy soon the information economy, or network economy, will take its place as the ...

S. Steward; J. Callaghan; T. Rea

1999-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "gas revolution technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Technology-Based Oil and Natural Gas Plays: Shale Shock! Could ...  

U.S. Energy Information Administration (EIA)

Technology-Based Oil and Natural Gas Plays: Shale Shock! Could There Be Billions in the Bakken? Through the use of technology, U.S. oil and natural gas operators are ...

122

Bio-Gas Technologies, LLC | Open Energy Information  

Open Energy Info (EERE)

Bio-Gas Technologies, LLC Bio-Gas Technologies, LLC Jump to: navigation, search Name Bio-Gas Technologies, LLC Address 2025 George St. Place Sandusky, Ohio Zip 44870 Sector Biomass, Renewable Energy, Wind energy Product Agriculture;Business and legal services;Consulting; Energy provider: power production;Energy provider: wholesale;Engineering/architectural/design;Installation;Investment/finances;Maintenance and repair;Manufacturing Phone number 419-663-8000 Website http://www.biogastech.com Coordinates 41.4369°, -82.747133° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":41.4369,"lon":-82.747133,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

123

Options for Gas-to-Liquids Technology in Alaska  

Science Conference Proceedings (OSTI)

The purposes of this work was to assess the effect of applying new technology to the economics of a proposed natural gas-to-liquids (GTL) plant, to evaluate the potential of a slower-paced, staged deployment of GTL technology, and to evaluate the effect of GTL placement of economics. Five scenarios were economically evaluated and compared: a no-major-gas-sales scenario, a gas-pipeline/LNG scenario, a fast-paced GTL development scenario, a slow-paced GTL development scenario, and a scenario which places the GTL plant in lower Alaska, instead of on the North Slope. Evaluations were completed using an after-tax discounted cash flow analysis. Results indicate that the slow-paced GTL scenario is the only one with a rate of return greater than 10 percent. The slow-paced GTL development would allow cost saving on subsequent expansions. These assumed savings, along with the lowering of the transportation tariff, combine to distinquish this option for marketing the North Slope gas from the other scenarios. Critical variables that need further consideration include the GTL plant cost, the GTL product premium, and operating and maintenance costs.

Robertson, Eric Partridge

1999-10-01T23:59:59.000Z

124

Options for gas-to-liquids technology in Alaska  

Science Conference Proceedings (OSTI)

The purpose of this work was to assess the effect of applying new technology to the economics of a proposed natural gas-to-liquids (GTL) plant, to evaluate the potential of a slower-paced, staged deployment of GTL technology, and to evaluate the effect of GTL placement of economics. Five scenarios were economically evaluated and compared: a no-major-gas-sales scenario, a gas-pipeline/LNG scenario, a fast-paced GTL development scenario, a slow-paced GTL development scenario, and a scenario which places the GTL plant in lower Alaska, instead of on the North Slope. Evaluations were completed using an after-tax discounted cash flow analysis. Results indicate that the slow-paced GTL scenario is the only one with a rate of return greater than 10%. The slow-paced GTL development would allow cost saving on subsequent expansions. These assumed savings, along with the lowering of the transportation tariff, combine to distinguish this option for marketing the North Slope gas from the other scenarios. Critical variables that need further consideration include the GTL plant cost, the GTL product premium, and operating and maintenance costs.

Robertson, E.P.

1999-12-01T23:59:59.000Z

125

Assisting Transit Agencies with Natural Gas Bus Technologies; Natural Gas Trasit Users Group (Fact Sheet)  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

and and infrastructure research, development, and deployment through its FreedomCAR and Vehicle Technologies Program to help the United States reduce its dependence on imported petro- leum and to pave the way to a future transportation network based on hydrogen. Natural gas vehicles can also reduce emissions of regulated pollutants compared with vehicles powered by conventional fuels such as gasoline

126

The 1991 natural gas vehicle challenge: Developing dedicated natural gas vehicle technology  

SciTech Connect

An engineering research and design competition to develop and demonstrate dedicated natural gas-powered light-duty trucks, the Natural Gas Vehicle (NGV) Challenge, was held June 6--11, 1191, in Oklahoma. Sponsored by the US Department of Energy (DOE), Energy, Mines, and Resources -- Canada (EMR), the Society of Automative Engineers (SAE), and General Motors Corporation (GM), the competition consisted of rigorous vehicle testing of exhaust emissions, fuel economy, performance parameters, and vehicle design. Using Sierra 2500 pickup trucks donated by GM, 24 teams of college and university engineers from the US and Canada participated in the event. A gasoline-powered control testing as a reference vehicle. This paper discusses the results of the event, summarizes the technologies employed, and makes observations on the state of natural gas vehicle technology.

Larsen, R.; Rimkus, W. [Argonne National Lab., IL (United States); Davies, J. [General Motors of Canada Ltd., Toronto, ON (Canada); Zammit, M. [AC Rochester, NY (United States); Patterson, P. [USDOE, Washington, DC (United States)

1992-02-01T23:59:59.000Z

127

The 1991 natural gas vehicle challenge: Developing dedicated natural gas vehicle technology  

SciTech Connect

An engineering research and design competition to develop and demonstrate dedicated natural gas-powered light-duty trucks, the Natural Gas Vehicle (NGV) Challenge, was held June 6--11, 1191, in Oklahoma. Sponsored by the US Department of Energy (DOE), Energy, Mines, and Resources -- Canada (EMR), the Society of Automative Engineers (SAE), and General Motors Corporation (GM), the competition consisted of rigorous vehicle testing of exhaust emissions, fuel economy, performance parameters, and vehicle design. Using Sierra 2500 pickup trucks donated by GM, 24 teams of college and university engineers from the US and Canada participated in the event. A gasoline-powered control testing as a reference vehicle. This paper discusses the results of the event, summarizes the technologies employed, and makes observations on the state of natural gas vehicle technology.

Larsen, R.; Rimkus, W. (Argonne National Lab., IL (United States)); Davies, J. (General Motors of Canada Ltd., Toronto, ON (Canada)); Zammit, M. (AC Rochester, NY (United States)); Patterson, P. (USDOE, Washington, DC (United States))

1992-01-01T23:59:59.000Z

128

Gas Technology Institute (Partnership for Advanced Residential Retrofit) |  

Open Energy Info (EERE)

Technology Institute (Partnership for Advanced Residential Retrofit) Technology Institute (Partnership for Advanced Residential Retrofit) Jump to: navigation, search Name Gas Technology Institute Place Des Plaines, IL Website http://www.gastechnology.org/ Coordinates 42.0333623°, -87.8833991° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.0333623,"lon":-87.8833991,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

129

New generation enrichment monitoring technology for gas centrifuge enrichment plants  

SciTech Connect

The continuous enrichment monitor, developed and fielded in the 1990s by the International Atomic Energy Agency, provided a go-no-go capability to distinguish between UF{sub 6} containing low enriched (approximately 4% {sup 235}U) and highly enriched (above 20% {sup 235}U) uranium. This instrument used the 22-keV line from a {sup 109}Cd source as a transmission source to achieve a high sensitivity to the UF{sub 6} gas absorption. The 1.27-yr half-life required that the source be periodically replaced and the instrument recalibrated. The instrument's functionality and accuracy were limited by the fact that measured gas density and gas pressure were treated as confidential facility information. The modern safeguarding of a gas centrifuge enrichment plant producing low-enriched UF{sub 6} product aims toward a more quantitative flow and enrichment monitoring concept that sets new standards for accuracy stability, and confidence. An instrument must be accurate enough to detect the diversion of a significant quantity of material, have virtually zero false alarms, and protect the operator's proprietary process information. We discuss a new concept for advanced gas enrichment assay measurement technology. This design concept eliminates the need for the periodic replacement of a radioactive source as well as the need for maintenance by experts. Some initial experimental results will be presented.

Ianakiev, Kiril D [Los Alamos National Laboratory; Alexandrov, Boian, S. [Los Alamos National Laboratory; Boyer, Brian, D. [Los Alamos National Laboratory; Hill, Thomas, R. [Los Alamos National Laboratory; Macarthur, Duncan, W. [Los Alamos National Laboratory; Marks, Thomas [Los Alamos National Laboratory; Moss, Calvin, E. [Los Alamos National Laboratory; Sheppard, Gregory, A. [Los Alamos National Laboratory; Swinhoe, Martyn, T. [Los Alamos National Laboratory

2008-01-01T23:59:59.000Z

130

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation  

NLE Websites -- All DOE Office Websites (Extended Search)

Mapping Study to Characterize NSCR Performance on a Natural Gas-Fueled Engine Mapping Study to Characterize NSCR Performance on a Natural Gas-Fueled Engine Mapping Study to Characterize NSCR Performance on a Natural Gas-Fueled Engine Authors: Mohamed Toema (speaker), Sarah Nuss-Warren, and Kirby S. Chapman, Kansas State University National Gas Machinery Laboratory; James McCarthy and Thomas McGrath, Innovative Environmental Solutions Inc. Venue: ASME Internal Combustion Engine Division 2009 Spring Technical Conference, May 3–6, Milwaukee, WI. http://www.asmeconferences.org/ICES09/index.cfm [external site]. Abstract: The researchers are conducting a project to characterize pollutant emissions performance of field gas-fired four-stroke cycle rich burn engines equipped with non-selective catalytic reduction (NSCR) technology. Engine emissions and operating parameters are being monitored on three engines over an extended period. In addition, a mapping study was conducted on one engine. The NSCR was operated at various controlled air-to-fuel (AF) ratios while emission measurements were conducted and engine operating parameters monitored. NOx, CO, and oxygen were measured using both EPA reference method technology and the portable analyzer used in the long-term study. In the mapping study, ammonia, formaldehyde, CO, NOx, and speciated hydrocarbon emissions were recorded in real-time using an extractive FTIR system. This paper focuses on the engine mapping phase. The mapping tests demonstrated a trade-off between NOx emissions and CO, ammonia, and hydrocarbon emissions. Richer engine operation (lower AF) decreases NOx emissions at the expense of higher CO, ammonia, and hydrocarbons. Leaner operation has the opposite effect. The results to date of the semi-continuous monitoring are presented in a separate paper.

131

Natural Gas Technologies II Conference - Ingenuity & Innovation  

NLE Websites -- All DOE Office Websites (Extended Search)

Natural Gas Technologies II Conference - Ingenuity & Innovation Natural Gas Technologies II Conference - Ingenuity & Innovation Session 10 - Gas Industry Forum February 8-11, 2004 Phoenix, Arizona Table of Contents Disclaimer Program [PDF-102KB] Biographies [PDF-107KB] Presentations Disclaimer This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government or any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof.

132

Nepal's Election: A Peaceful Revolution?  

E-Print Network (OSTI)

............................................................................25 F. CRISIS GROUP BOARD OF TRUSTEES................................................................................................27 Asia Report N155 3 July 2008 NEPALS ELECTION: A PEACEFUL REVOLUTION? EXECUTIVE SUMMARY Nepals constituent... , catapulting the country into regional leader- ship on gender representation. Thanks largely to the PR component, no fewer than 25 parties have secured CA seats, reflecting a kaleidoscope of ideological and regional or community-specific agendas. The MJF...

International Crisis Group

2008-07-03T23:59:59.000Z

133

Building Technologies Office: Gas-Fired Absorption Heat Pump Water Heater  

NLE Websites -- All DOE Office Websites (Extended Search)

Gas-Fired Absorption Gas-Fired Absorption Heat Pump Water Heater Research Project to someone by E-mail Share Building Technologies Office: Gas-Fired Absorption Heat Pump Water Heater Research Project on Facebook Tweet about Building Technologies Office: Gas-Fired Absorption Heat Pump Water Heater Research Project on Twitter Bookmark Building Technologies Office: Gas-Fired Absorption Heat Pump Water Heater Research Project on Google Bookmark Building Technologies Office: Gas-Fired Absorption Heat Pump Water Heater Research Project on Delicious Rank Building Technologies Office: Gas-Fired Absorption Heat Pump Water Heater Research Project on Digg Find More places to share Building Technologies Office: Gas-Fired Absorption Heat Pump Water Heater Research Project on AddThis.com...

134

New Generating Technology to Reduce Greenhouse Gas Emissions  

U.S. Energy Information Administration (EIA) Indexed Site

Generating Technology to Generating Technology to Reduce Greenhouse Gas Emissions ENERGY INFORMATION ADMINISTRATION 30 TH BIRTHDAY CONFERENCE April 7, 2008 Linda G. Stuntz Stuntz, Davis & Staffier, P.C. Stuntz, Davis & Staffier, P.C. 2 The Target * Energy related emissions of CO2 will increase by about 16% in AEO 2008 Reference Case between 2006 and 2030 (5,890 MM metric tons to 6,859 MM metric tons). (#s from Caruso Senate Energy testimony of 3/4/08). * Last year, emissions from electricity generation were 40% of total energy-related GHG emissions. * Based on projected annual electricity demand growth of 1.1%. Stuntz, Davis & Staffier, P.C. 3 The Target Cont'd * 16.4 GW of new nuclear + 2.7 GW Uprates of existing plants less 4.5 GW of retirements. * Coal responsible for 54% of generation in 2030.

135

NETL: Gasification Systems - Advanced Acid Gas Separation Technology for  

NLE Websites -- All DOE Office Websites (Extended Search)

Feed Systems Feed Systems Advanced Acid Gas Separation Technology for the Utilization of Low-Rank Coals Project Number: DE-FE0007759 Refinery offgas PSA at Air Products' facility in Baytown, TX Refinery offgas PSA at Air Products' facility in Baytown, TX. Air Products, in collaboration with the University of North Dakota Energy and Environmental Research Center (EERC), is testing its Sour Pressure Swing Adsorption (Sour PSA) process that separates syngas into an hydrogen-rich stream and second stream comprising of sulfur compounds(primarily hydrogen sulfide)carbon dioxide (CO2), and other impurities. The adsorbent technology testing that has been performed to date utilized syngas streams derived from higher rank coals and petcoke. Using data from experiments based on petcoke-derived syngas, replacing the

136

Office of Fossil Energy Oil & Natural Gas Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

Fossil Energy Fossil Energy Oil & Natural Gas Technology Detection and Production of Methane Hydrate End of Phase 2 Topical Report Reporting Period: June, 2007-June, 2008 Submitted by: Rice University and University of Houston George J. Hirasaki and Walter Chapman, Chemical and Biomolecular Engineering Gerald R. Dickens, Colin A. Zelt, and Brandon E. Dugan, Earth Science Kishore K. Mohanty, University of Houston June, 2008 DOE Award No.: DE-FC26-06NT42960 Rice University - MS 362 6100 Main St. Houston, TX 77251-1892 Phone: 713-348-5416; FAX: 713-348-5478; Email: gjh@rice.edu University of Houston Department of Chemical Engineering 4800 Calhoun Street Houston, TX 77204-4004 Prepared for: United States Department of Energy National Energy Technology Laboratory

137

BENCH-SCALE DEMONSTRATION OF HOT-GAS DESULFURIZATION TECHNOLOGY  

SciTech Connect

The U.S. Department of Energy (DOE), Federal Energy Technology Center (FETC), is sponsoring research in advanced methods for controlling contaminants in hot coal gasifier gas (coal-derived fuel-gas) streams of integrated gasification combined-cycle (IGCC) power systems. The hot gas cleanup work seeks to eliminate the need for expensive heat recovery equipment, reduce efficiency losses due to quenching, and minimize wastewater treatment costs. Hot-gas desulfurization research has focused on regenerable mixed-metal oxide sorbents that can reduce the sulfur in coal-derived fuel-gas to less than 20 ppmv and can be regenerated in a cyclic manner with air for multicycle operation. Zinc titanate (Zn{sub 2} TiO{sub 4} or ZnTiO{sub 3}), formed by a solid-state reaction of zinc oxide (ZnO) and titanium dioxide (TiO{sub 2}), is currently one of the leading sorbents. Overall chemical reactions with Zn{sub 2} TiO{sub 4} during the desulfurization (sulfidation)-regeneration cycle are shown below: Sulfidation: Zn{sub 2} TiO{sub 4} + 2H{sub 2}S {yields} 2ZnS + TiO{sub 2} + 2H{sub 2}O; Regeneration: 2ZnS + TiO{sub 2} + 3O{sub 2} {yields} Zn{sub 2} TiO{sub 4} + 2SO{sub 2} The sulfidation/regeneration cycle can be carried out in a fixed-bed, moving-bed, or fluidized-bed reactor configuration. The fluidized-bed reactor configuration is most attractive because of several potential advantages including faster kinetics and the ability to handle the highly exothermic regeneration to produce a regeneration offgas containing a constant concentration of SO{sub 2}.

Unknown

1999-10-01T23:59:59.000Z

138

Economical analysis of a new gas to ethylene technology  

E-Print Network (OSTI)

Ethylene is one of the most important petrochemical intermediates and feedstocks for many different products. The motivating force of this work is to compare a new process of ethylene production developed at Texas A&M University to the most common processes. Ethylene is produced commercially using a wide variety of feedstocks ranging from ethane to heavy fuel oils. Of them, the thermal cracking of ethane and propane using a fired tubular heater is the most common process in the United States. In Europe and Japan, where natural gas is not abundant, thermal cracking of naphtha using a fired heater is the most common process. In addition to these processes; ethylene could also be produced from crude oil by autothermic and fluidized bed techniques and from coal and heavy oils by synthesis from carbon monoxide and hydrogen. At Texas A&M University, a group of researchers developed a new process that can convert natural gas into liquids (GTL) or to ethylene (GTE). This technology is a direct conversion method that does not require producing syngas. When selecting a process for ethylene production, the dominant factor is the selection of hydrocarbon feedstocks. Based upon plant capacity of 321 million pounds of ethylene per year, this study has shown that using natural gas, as a feedstock, is more economical than using ethane, propane, naphtha, and other feedstocks. Therefore, it is more economical to convert natural gas directly to ethylene than separating ethane or propane from natural gas and then converting it to ethylene. A process simulation package ProMax is used to run the GTE process; and a software program, Capcost, is used to evaluate fixed capital costs of the GTE process. Finally, the cost index is used to update the cost of the other processes of ethylene production today.

Abedi, Ali Abdulhamid

2003-05-01T23:59:59.000Z

139

Advanced Hydraulic Fracturing Technology for Unconventional Tight Gas Reservoirs  

Science Conference Proceedings (OSTI)

The objectives of this project are to develop and test new techniques for creating extensive, conductive hydraulic fractures in unconventional tight gas reservoirs by statistically assessing the productivity achieved in hundreds of field treatments with a variety of current fracturing practices ranging from 'water fracs' to conventional gel fracture treatments; by laboratory measurements of the conductivity created with high rate proppant fracturing using an entirely new conductivity test - the 'dynamic fracture conductivity test'; and by developing design models to implement the optimal fracture treatments determined from the field assessment and the laboratory measurements. One of the tasks of this project is to create an 'advisor' or expert system for completion, production and stimulation of tight gas reservoirs. A central part of this study is an extensive survey of the productivity of hundreds of tight gas wells that have been hydraulically fractured. We have been doing an extensive literature search of the SPE eLibrary, DOE, Gas Technology Institute (GTI), Bureau of Economic Geology and IHS Energy, for publicly available technical reports about procedures of drilling, completion and production of the tight gas wells. We have downloaded numerous papers and read and summarized the information to build a database that will contain field treatment data, organized by geographic location, and hydraulic fracture treatment design data, organized by the treatment type. We have conducted experimental study on 'dynamic fracture conductivity' created when proppant slurries are pumped into hydraulic fractures in tight gas sands. Unlike conventional fracture conductivity tests in which proppant is loaded into the fracture artificially; we pump proppant/frac fluid slurries into a fracture cell, dynamically placing the proppant just as it occurs in the field. From such tests, we expect to gain new insights into some of the critical issues in tight gas fracturing, in particular the roles of gel damage, polymer loading (water-frac versus gel frac), and proppant concentration on the created fracture conductivity. To achieve this objective, we have designed the experimental apparatus to conduct the dynamic fracture conductivity tests. The experimental apparatus has been built and some preliminary tests have been conducted to test the apparatus.

Stephen Holditch; A. Daniel Hill; D. Zhu

2007-06-19T23:59:59.000Z

140

#CleanTechNow: America's Clean Energy Revolution | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

#CleanTechNow: America's Clean Energy Revolution #CleanTechNow: America's Clean Energy Revolution #CleanTechNow: America's Clean Energy Revolution September 17, 2013 - 10:21am Addthis Levi Tillemann Levi Tillemann Special Advisor for Policy and International Affairs How can I participate? Read a blog post from Secretary Ernest Moniz about the report and the Clean Energy revolution. All week on energy.gov, we'll be highlighting four key clean energy technologies that are already making America's clean energy future a reality. Share your photos of how clean energy technology already plays a role in your everyday life, using the tag #CleanTechNow. Submit your #CleanTechNow photos via Twitter, Instagram, Facebook or email at newmedia@hq.doe.gov. We'll share our favorites next week. Over the past four years, America's clean energy future has come into

Note: This page contains sample records for the topic "gas revolution technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

#CleanTechNow: America's Clean Energy Revolution | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

#CleanTechNow: America's Clean Energy Revolution #CleanTechNow: America's Clean Energy Revolution #CleanTechNow: America's Clean Energy Revolution September 17, 2013 - 10:21am Addthis Levi Tillemann Levi Tillemann Special Advisor for Policy and International Affairs How can I participate? Read a blog post from Secretary Ernest Moniz about the report and the Clean Energy revolution. All week on energy.gov, we'll be highlighting four key clean energy technologies that are already making America's clean energy future a reality. Share your photos of how clean energy technology already plays a role in your everyday life, using the tag #CleanTechNow. Submit your #CleanTechNow photos via Twitter, Instagram, Facebook or email at newmedia@hq.doe.gov. We'll share our favorites next week. Over the past four years, America's clean energy future has come into

142

The Information Revolution: Software's Critical Connection  

Science Conference Proceedings (OSTI)

... Revolution, the kinds of changes it demanded in the ... how we think about what the demands will be ... systems with all that that implies, everything from ...

2010-10-05T23:59:59.000Z

143

Technology and Greenhouse Gas Emissions: An IntegratedScenario Analysis  

SciTech Connect

This report describes an analysis of possible technology-based scenarios for the U.S. energy system that would result in both carbon savings and net economic benefits. We use a modified version of the Energy Information Administration's National Energy Modeling System (LBNL-NEMS) to assess the potential energy, carbon, and bill savings from a portfolio of carbon saving options. This analysis is based on technology resource potentials estimated in previous bottom-up studies, but it uses the integrated LBNL-NEMS framework to assess interactions and synergies among these options. The analysis in this paper builds on previous estimates of possible "technology paths" to investigate four major components of an aggressive greenhouse gas reduction strategy: (1) the large scale implementation of demand-side efficiency, comparable in scale to that presented in two recent policy studies on this topic; (2) a variety of "alternative" electricity supply-side options, including biomass cofiring, extension of the renewable production tax credit for wind, increased industrial cogeneration, and hydropower refurbishment. (3) the economic retirement of older and less efficient existing fossil-find power plants; and (4) a permit charge of $23 per metric ton of carbon (1996 $/t),l assuming that carbon trading is implemented in the US, and that the carbon permit charge equilibrates at this level. This level of carbon permit charge, as discussed later in the report, is in the likely range for the Clinton Administration's position on this topic.

Koomey, J.G.; Latiner, S.; Markel, R.J.; Marnay, C.; Richey, R.C.

1998-09-01T23:59:59.000Z

144

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation  

NLE Websites -- All DOE Office Websites (Extended Search)

Variation in Long-Term Emissions Data from NSCR-Equipped Natural Gas-Fueled Engine Variation in Long-Term Emissions Data from NSCR-Equipped Natural Gas-Fueled Engine Variation in Long-Term Emissions Data from NSCR-Equipped Natural Gas-Fueled Engine Authors: Kirby S. Chapman (speaker), Mohamed Toema, and Sarah Nuss-Warren, Kansas State University National Gas Machinery Laboratory. Venue: ASME Internal Combustion Engine Division 2009 Spring Technical Conference, May 3–6, Milwaukee, WI. http://www.asmeconferences.org/ICES09/index.cfm [external site]. Abstract: This paper describes work on a project to characterize pollutant emissions performance of non-selective catalytic reduction (NSCR) technology, including a catalyst and air-to-fuel ratio controller (AFRC), applied to four-stroke cycle rich-burn engines. Emissions and engine data were collected semi-continuously with a portable emissions analyzer on three engines in the Four Corners area. In addition, periodic emissions measurements that included ammonia were conducted several times. Data collected from October 2007 through August 2008 show significant variation in emissions levels over hours, days, and longer periods of time, as well as seasonal variation. As a result of these variations, simultaneous control of NOx to below a few hundred parts per million (ppm) and CO to below 1,000 ppm volumetric concentration was not consistently achieved. Instead, the NSCR/AFRC systems were able to simultaneously control both species to these levels for only a fraction of the time the engines were monitored. Both semi-continuous emissions data and periodically collected emissions data support a NOx-CO trade-off and a NOx-ammonia tradeoff in NSCR-equipped engines.

145

Available Technologies: JIB-2689 Compact Microchip Gas Sensor  

Natural gas leak detector for residential or commercial buildings; ... Affordable mass production; More energy efficient than current gas sensors ; ...

146

Technology drives natural gas production growth from shale ...  

U.S. Energy Information Administration (EIA)

Crude oil, gasoline, heating oil, diesel, ... Rapid increases in natural gas production from shale gas formations resulted from widespread application ...

147

Oil & Natural Gas Technology DOE Award No.: FWP 49462  

E-Print Network (OSTI)

Used by Marcellus Shale Gas Producers Submitted by: John A. Veil Argonne National Laboratory Argonne, and gas shales. Figure 1 shows EIA projections of the source of natural gas supplies through 2030 productive oil and gas activities in the country today are shale gas plays. Figure 1 ­ U.S. Natural Gas

Boyer, Elizabeth W.

148

Environmental Energy Technologies Division Energy Analysis Department Managing Natural Gas Price  

E-Print Network (OSTI)

-fired generation contracts 2) Reduces Natural Gas Prices: Increased RE reduces natural gas demand, and consequently Quantity Q0 P0 P1 Q1 Original Demand ShiftedDemandq Theory: Increased use of RE will reduce natural gasEnvironmental Energy Technologies Division · Energy Analysis Department Managing Natural Gas Price

149

Vehicle Technologies Office: Fact #276: July 14, 2003 Natural Gas Reserves,  

NLE Websites -- All DOE Office Websites (Extended Search)

6: July 14, 2003 6: July 14, 2003 Natural Gas Reserves, Production, and Consumption, 2000 to someone by E-mail Share Vehicle Technologies Office: Fact #276: July 14, 2003 Natural Gas Reserves, Production, and Consumption, 2000 on Facebook Tweet about Vehicle Technologies Office: Fact #276: July 14, 2003 Natural Gas Reserves, Production, and Consumption, 2000 on Twitter Bookmark Vehicle Technologies Office: Fact #276: July 14, 2003 Natural Gas Reserves, Production, and Consumption, 2000 on Google Bookmark Vehicle Technologies Office: Fact #276: July 14, 2003 Natural Gas Reserves, Production, and Consumption, 2000 on Delicious Rank Vehicle Technologies Office: Fact #276: July 14, 2003 Natural Gas Reserves, Production, and Consumption, 2000 on Digg Find More places to share Vehicle Technologies Office: Fact #276:

150

Technology Adoption and Regulatory Regimes: Gas Turbines Electricity Generators from 1980 to 2001  

E-Print Network (OSTI)

cost of natural gas and the enactment of the Power Plant &Power Plant & Industrial Fuel Use Act and the natural gaspower plant emissions, created a premium for clean-burning technologies. With natural gas

Ishii, Jun

2004-01-01T23:59:59.000Z

151

A Clean Energy Revolution -- Now | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

A Clean Energy Revolution -- Now A Clean Energy Revolution -- Now September 19, 2013 - 3:52pm Addthis A Clean Energy Revolution -- Now Dr. Ernest Moniz Dr. Ernest Moniz Secretary...

152

Natural gas and efficient technologies: A response to global warming  

DOE Green Energy (OSTI)

It has become recognized by the international scientific community that global warming due to fossil fuel energy buildup of greenhouse CO{sub 2} in the atmosphere is a real environmental problem. Worldwide agreement has also been reached to reduce CO{sub 2} emissions. A leading approach to reducing CO{sub 2} emissions is to utilize hydrogen-rich fuels and improve the efficiency of conversion in the power generation, transportation and heating sectors of the economy. In this report, natural gas, having the highest hydrogen content of all the fossil fuels, can have an important impact in reducing CO{sub 2} emissions. This paper explores natural gas and improved conversion systems for supplying energy to all three sectors of the economy. The improved technologies include combined cycle for power generation, the Carnol system for methanol production for the transportation sector and fuel cells for both power generation and transportation use. The reduction in CO{sub 2} from current emissions range from 13% when natural gas is substituted for gasoline in the transportation sector to 45% when substituting methanol produced by the Carnol systems (hydrogen from thermal decomposition of methane reacting with CO{sub 2} from coal-fired power plants) used in the transportation sector. CO{sub 2} reductions exceeding 60% can be achieved by using natural gas in combined cycle for power generation and Carnol methanol in the transportation sector and would, thus, stabilize CO{sub 2} concentration in the atmosphere predicted to avoid undue climate change effects. It is estimated that the total fossil fuel energy bill in the US can be reduced by over 40% from the current fuel bill. This also allows a doubling in the unit cost for natural gas if the current energy bill is maintained. Estimates of the total net incremental replacement capital cost for completing the new improved equipment is not more than that which will have to be spent to replace the existing equipment conducting business as usual.

Steinberg, M.

1998-02-01T23:59:59.000Z

153

Technology Solutions for Mitigating Environmental Impacts of Oil and Gas E&P Activity  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Solutions for Mitigating Technology Solutions for Mitigating Environmental Impacts of Oil and Gas E&P Activity The mission of the Environmental Program is to promote a reliable, affordable, and secure supply of domestic oil and clean-burning natural gas, by providing cost-effective environmental regulatory compliance technologies, enhancing environmental protections during oil and gas E&P operations, and facilitating the development and use of scientific, risk-based environmental regulatory frameworks.

154

Documentation and review of Eastern gas shales technology. Annual report, April 1, 1985-February 28, 1986  

Science Conference Proceedings (OSTI)

The report provides coverage on a project (1) to provide technology-transfer support for the Eastern Gas Shales Project Area, promoting the awareness and application of the program products through periodic publication of Eastern Devonian Gas Shales Technology Review and (2) to quantify impacts of technology improvements on shale gas cost-supply relationships, in order to aid in guiding the thrust of GRI's research program.

Skrinak, V.M.

1986-06-01T23:59:59.000Z

155

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Coupled Hydrological, Thermal and Geomechanical Analysis of Wellbore Stability in Hydrate-Bearing Sediments Coupled Hydrological, Thermal and Geomechanical Analysis of Wellbore Stability in Hydrate-Bearing Sediments Coupled Hydrological, Thermal and Geomechanical Analysis of Wellbore Stability in Hydrate-Bearing Sediments (OTC 19672) Authors: Jonny Rutqvist (speaker), George J. Moridis, and Tarun Grover Venue: 2008 Offshore Technology Conference, Houston, Texas, May 5-8, 2008 ( http://www.spe.org and http://www.smenet.org [external sites] ) Abstract: This study investigated coupled multiphase flow, themal, thermodynamic and geomechanical behavior of oceanic Hydrate Bearing Sediments (HBS), during depressurization-induced gas production in general, and potential wellbore in-stability and casing deformation in particular. The project investigated the geomechanical changes and wellbore stability for two alternative cases of production using a horizontal well in a Class 3 deposit and a vertical well in a Class 2 deposit. The research compared the geomechanical responses and the potential adverse geomechanical effects for the two different cases. Analysis shows that geomechanical responses during depressurization-induced gas production from oceanic hydrate deposits is driven by the reservoir-wide pressure decline (Delta P), which in turn is controlled by the induced pressure decline near the wellbore. Because any change quickly propagates within the entire reservoir, the reservoir wide geomechanical response can occur within a few days of production induced pressure decline.

156

Implementing the Climate Change Policy Revolution in  

E-Print Network (OSTI)

Implementing the Climate Change Policy Revolution in British Columbia (BC) The Tansley Lecture Johnson-Shoyama Graduate School of Public Policy #12;Implementing the Climate Change Policy Revolution Johnson-Shoyama Graduate School of Public Policy Tansley Lecture 2010 #12;#12;Implementing the Climate

Peak, Derek

157

Gas shales characterization and technology development and transfer. Annual technical report, October 1991-September 1992  

Science Conference Proceedings (OSTI)

The objective of the Technology Transfer work area was to compile and publish the Technology Review, Sponsor Gas Shales Workshops, and manage the Marietta College Natural Gas Supply Information Center. In the Technical and Economic Evaluations work area, the objective was to quantify the gas shale resource and determine the potential economic benefits of future shale research. The objectives of the third work area, Field Projects in the Antrim Shale were to improve gas producibility from the Antrim Shale by optimizing stimulations and production practices and to develop log-based gas content and gas in-place calculations.

Wicks, D.; Decker, D.; Reeves, S.

1992-10-01T23:59:59.000Z

158

Wireless technology collects real-time information from oil and gas wells  

NLE Websites -- All DOE Office Websites (Extended Search)

Wireless technology collects real-time information from oil and gas Wireless technology collects real-time information from oil and gas wells Wireless technology collects real-time information from oil and gas wells The patented system delivers continuous electromagnetic data on the reservoir conditions, enabling economical and effective monitoring and analysis. April 3, 2012 One of several active projects, LANL and Chevron co-developed INFICOMM(tm), a wireless technology used to collect real-time temperature and pressure information from sensors in oil and gas wells, including very deep wells already producing oil and gas and drilling operations for new wells. One of several active projects, LANL and Chevron co-developed INFICOMM(tm), a wireless technology used to collect real-time temperature and pressure information from sensors in oil and gas wells, including very deep wells

159

Water management technologies used by Marcellus Shale Gas Producers.  

Science Conference Proceedings (OSTI)

Natural gas represents an important energy source for the United States. According to the U.S. Department of Energy's (DOE's) Energy Information Administration (EIA), about 22% of the country's energy needs are provided by natural gas. Historically, natural gas was produced from conventional vertical wells drilled into porous hydrocarbon-containing formations. During the past decade, operators have increasingly looked to other unconventional sources of natural gas, such as coal bed methane, tight gas sands, and gas shales.

Veil, J. A.; Environmental Science Division

2010-07-30T23:59:59.000Z

160

DOE-Funded Primer Underscores Technology Advances, Challenges of Shale Gas  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE-Funded Primer Underscores Technology Advances, Challenges of DOE-Funded Primer Underscores Technology Advances, Challenges of Shale Gas Development DOE-Funded Primer Underscores Technology Advances, Challenges of Shale Gas Development April 14, 2009 - 1:00pm Addthis Washington, D.C. - The U.S. Department of Energy (DOE) announces the release of "Modern Shale Gas Development in the United States: A Primer." The Primer provides regulators, policy makers, and the public with an objective source of information on the technology advances and challenges that accompany deep shale gas development. Natural gas production from hydrocarbon rich deep shale formations, known as "shale gas," is one of the most quickly expanding trends in onshore domestic oil and gas exploration. The lower 48 states have a wide

Note: This page contains sample records for the topic "gas revolution technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Fuel Cell Technologies Office: Natural Gas and Hydrogen Infrastructure...  

NLE Websites -- All DOE Office Websites (Extended Search)

Natural Gas and Hydrogen Infrastructure Opportunities Workshop Argonne National Laboratory held a Natural Gas and Hydrogen Infrastructure Opportunities Workshop October 18-19,...

162

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Gas Production From Oceanic Class 2 Hydrate Accumulations Gas Production From Oceanic Class 2 Hydrate Accumulations Authors: George J. Moridis, Matt T. Reagan, Lawrence Berkeley...

163

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

to provide lean injection gas for reservoir energy, to provide fuel for potential viscous oil thermal recovery, or to supplement future export gas. The associated fresh water...

164

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Gas-hydrate concentration and uncertainty estimation from electrical resistivity logs: examples from Green Canyon, Gulf of Mexico Gas-hydrate concentration and uncertainty...

165

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Gas Production From Class 2 Hydrate Accumulations in the Permafrost Gas Production From Class 2 Hydrate Accumulations in the Permafrost Authors: Moridis, George (speaker) and...

166

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

studies have provided strong indications that it is possible to produce large volumes of gas from natural hydrate deposits at high rates for long times from gas hydrate...

167

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Strategies for Gas Production From Oceanic Class 3 Hydrate Accumulations Strategies for Gas Production From Oceanic Class 3 Hydrate Accumulations Authors: George J. Moridis, Matt...

168

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Geologic Controls on the Occurrence of Gas Hydrates in the Indian Continental Margin Geologic Controls on the Occurrence of Gas Hydrates in the Indian Continental Margin: Results...

169

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Reactive transport modeling of oceanic gas hydrate instability and dissociation in response to climate change Reactive transport modeling of oceanic gas hydrate instability and...

170

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Scale Study of Hydrate Formation in Sediments from Methane Gas Grain Scale Study of Hydrate Formation in Sediments from Methane Gas: Role of Capillarity Authors: Javad Behseresht,...

171

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Similarity Solution for Gas Production From Dissociating Hydrates in Geologic Media Similarity Solution for Gas Production From Dissociating Hydrates in Geologic Media Authors:...

172

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Produced Water Treatment Using Gas Hydrate Formation at the Wellhead Produced Water Treatment Using Gas Hydrate Formation at the Wellhead Authors: John and Deidre Boysen Venue:...

173

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Mechanisms by Which Methane Gas and Methane Hydrate Coexist In Ocean Sediments Mechanisms by Which Methane Gas and Methane Hydrate Coexist In Ocean Sediments Authors: Maa...

174

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Identifying gas hydrate prospects offshore India Identifying gas hydrate prospects offshore India Authors: Collett, Timothy S. (speaker: Winters, Bill, U.S. Geological Survey)....

175

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Gas hydrates: A multidisciplinary research opportunity Gas hydrates: A multidisciplinary research opportunity Author: William F. Waite, U.S. Geological Survey (USGS) Venue:...

176

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

2007 (https:www.confmanager.commain.cfm?cid680&nid5792 external site). Abstract: Gas hydrate may contain significant natural gas resources in both onshore arctic and...

177

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Yates Formation Gas-Reservoir and Seal Facies, Depositional and Diagenetic Model and Well-log Responses Yates Formation Gas-Reservoir and Seal Facies, Depositional and Diagenetic...

178

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Oceanic Gas Hydrate Instability and Dissociation in Response to Climate Change Oceanic Gas Hydrate Instability and Dissociation in Response to Climate Change Authors: Moridis,...

179

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Early Cretaceous and Early Paleogene. Such temperatures would impact the distribution of gas hydrate in marine sediment. Clearly, the vertical extent of the Gas Hydrate Stability...

180

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

The Use of Horizontal Wells in Gas Production from Hydrate Accumulations The Use of Horizontal Wells in Gas Production from Hydrate Accumulations Authors: George J. Moridis...

Note: This page contains sample records for the topic "gas revolution technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

The Feasibility of Monitoring Gas Hydrate Production with Geophysical Methods Feasibility of Monitoring Gas Hydrate Production with Geophysical Methods Authors: M.B. Kowalsky...

182

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Sensitivity Analysis of Gas Production from Class 2 and Class 3 Hydrate Deposits Sensitivity Analysis of Gas Production from Class 2 and Class 3 Hydrate Deposits (OTC 19554)...

183

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Geological complexities in shale gas systems Geological complexities in shale gas systems Authors: H. Rowe, R. G. Loucks, S. C. Ruppel, and S. Rimmer Venue: 2008 American...

184

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

from natural gas hydrates, plugging pipelines, stability and safety of drilling of platforms, as well as how dissociation of gas hydrates and sequestration of CO2 within the...

185

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Field Evaluation of a Surfactant-Modified Zeolite System for Removal of Organics from Produced Water Field Evaluation of a Surfactant-Modified Zeolite System for Removal of Organics from Produced Water Field Evaluation of a Surfactant-Modified Zeolite System for Removal of Organics from Produced Water Authors: Robert S. Bowman, New Mexico Technological University, Socorro, NM; Enid J. Sullivan, Los Alamos National Laboratory, Los Alamos, NM; and Lynn E. Katz and Kerry A. Kinney, University of Texas, Austin, TX. Venue: 44th Annual Meeting of the Clay Minerals Society in Santa Fe, NM, June 3–7, 2007 (http://www.clays.org/home/HomeAnnualMeeting.html [external site]). Abstract: About 2.3 billion cubic meters (600 billion gallons) of wastewater (produced water) is generated each year as a byproduct of oil and gas operations in the continental United States. Disposal of this water represents about 10% of the cost of hydrocarbon production. Inexpensive treatment technologies can lower the cost of disposal and generate higher-quality water for other uses. Surfactant-modified zeolite (SMZ) has been shown to effectively sorb a variety of nonpolar organic compounds from water. SMZ was tested as a medium to remove benzene, toluene, ethylbenzene, and xylenes (BTEX) from produced water generated during extraction of coalbed natural gas. BTEX removal is necessary prior to surface discharge of produced waters or as a pretreatment for reverse osmosis. We demonstrated in laboratory column experiments that BTEX-saturated SMZ is readily regenerated by air sparging. There was no loss in BTEX sorption capacity, and a minor decrease in hydraulic conductivity, after 50 sorption/regeneration cycles. Based upon the laboratory results, a pilot-scale produced-water treatment system was designed and tested at a reinjection facility in the San Juan Basin of New Mexico. The SMZ-based system was designed to treat up to 110 liters (30 gallons) of produced water per hour on a continuous basis by running two SMZ columns in series. The system performed as predicted, based on laboratory results, over repeated feed and regeneration cycles during the month-long operation. The BTEX-laden sparge gases were treated with a vapor-phase bioreactor system, resulting in an emissions-free process

186

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Numerical Studies of Geomechanical Stability of Hydrate-Bearing Sediments Numerical Studies of Geomechanical Stability of Hydrate-Bearing Sediments Authors: George J. Moridis, Jonny Rutqvist, Lawrence Berkeley National Laboratory. Venue: 2007 Offshore Technology Conference, Houston, TX, April 30–May 1, 2007 (http://www.otcnet.org/ [external site]). Abstract: The thermal and mechanical loading of hydrate-bearing sediments (HBS) can result in hydrate dissociation and a significant pressure increase, with potentially adverse consequences on the integrity and stability of the wellbore assembly, the HBS, and the bounding formations. The perception of HBS instability, coupled with insufficient knowledge of their geomechanical behavior and the absence of predictive capabilities, has resulted in a strategy of avoidance of HBS when locating offshore production platforms. These factors can also impede the development of hydrate deposits as gas resources. For the analysis of the geomechanical stability of HBS, project researchers developed and used a numerical model that integrates a commercial geomechanical code into a simulator describing the coupled processes of fluid flow, heat transport, and thermodynamic behavior in geologic media. The geomechanical code includes elastoplastic models for quasi-static yield and failure analysis and viscoplastic models for time-dependent (creep) analysis. The hydrate simulator can model the non-isothermal hydration reactions (equilibrium or kinetic), phase behavior, and flow of fluids and heat in HBS, and can handle any combination of hydrate dissociation mechanisms. The simulations can account for the interdependence of changes in the hydraulic, thermodynamic, and geomechanical properties of the HBS, in addition to swelling/shrinkage, displacement (subsidence), and possible geomechanical failure. Researchers investigated in three cases the coupled hydraulic, thermodynamic, and geomechanical behavior of oceanic HBS systems. The first involves hydrate heating as warm fluids from deeper, conventional reservoirs ascend to the ocean floor through uninsulated pipes intersecting the HBS. The second case involves mechanical loading caused by the weight of structures placed on HBS at the ocean floor, and the third describes system response during gas production from a hydrate deposit. The results indicate that the stability of HBS in the vicinity of warm pipes may be significantly affected, especially near the ocean floor where the sediments are unconsolidated and more compressible. Conversely, the increased pressure caused by the weight of structures on the ocean floor increases the stability of hydrates, while gas production from oceanic deposits minimally affects the geomechanical stability of HBS under the conditions that are deemed desirable for production.

187

Communication to the 10th International Conference on Greenhouse Gas Control Technologies (GHGT 10), Amsterdam, September 19-23, 2010.  

E-Print Network (OSTI)

Communication to the 10th International Conference on Greenhouse Gas Control Technologies (GHGT 10 on Greenhouse Gas Control Technologies GHGT-10, Amsterdam : Pays-Bas (2010)" #12;2. Historical context Total. The captured gas is compressed and transported for about 30km reusing an existing natural gas pipeline. The gas

Paris-Sud XI, Université de

188

Gas Mileage of 1998 Vehicles by Quantum Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

8 Quantum Technologies Vehicles EPA MPG MODEL City Comb Hwy 1998 Quantum Technologies Chevrolet Cavalier 4 cyl, 2.2 L, Automatic 3-spd, CNG Compare 1998 Quantum Technologies...

189

Advanced Acid Gas Separation Technology for Clean Power and Syngas  

NLE Websites -- All DOE Office Websites (Extended Search)

Syngas Processing Systems Syngas Processing Systems Advanced Acid Gas Separation Technology for Clean Power and Syngas Applications Air Products and Chemicals, Inc. Project Number: FE0013363 Project Description In this project, Air Products will operate a two-bed mobile system at the National Carbon Capture Center (NCCC) facility. A slipstream of authentic, high-hydrogen syngas based on low-rank coal will be evaluated as the feedstock. Testing will be conducted for approximately eight weeks, thereby providing far longer adsorbent exposure data than demonstrated to date. By utilizing real-world, high- hydrogen syngas, information necessary to understand the utility of the system for methanol production will be made available. In addition, Air Products will also operate a multi-bed PSA process development unit (PDU), located at its Trexlertown, PA headquarters, to evaluate the impact of incorporating pressure equalization steps in the process cycle. This testing will be conducted utilizing a sulfur-free, synthetic syngas, and will improve the reliability of the prediction of the system's operating performance at commercial scale.

190

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Permeability of Laboratory-Formed Hydrate-Bearing Sand Permeability of Laboratory-Formed Hydrate-Bearing Sand Permeability of Laboratory-Formed Hydrate-Bearing Sand (OTC 19536) Authors: Timothy J. Kneafsey (speaker), Yongkoo Seol, Arvind Gupta, and Liviu Tomutsa Venue: 2008 Offshore Technology Conference, Houston, Texas, May 5-8, 2008 http://www.spe.org and http://www.smenet.org [external sites] Abstract: Methane hydrate was formed in moist sand under confining stress in a long, x-ray transparent pressure vessel. Three initial water saturations were used to form three different methane hydrate saturations. X-ray computed tomography (CT) was used to observe location-specific density changes, caused by hydrate formation and flowing water. Gas permeability was measured in each test for dry sand, moist sand, frozen sand, and hydrate-bearing sand. Results of these measurements are presented. Water was flowed through the hydrate-bearing sand, and the changes in water saturation were observed using CT scanning. Inverse modeling will be performed using these data to extend the relative permeability measurements

191

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Characterization of Nonequilibrium Sorption of Gasoline Components by Surfactant-Modified Zeolite Characterization of Nonequilibrium Sorption of Gasoline Components by Surfactant-Modified Zeolite Characterization of Nonequilibrium Sorption of Gasoline Components by Surfactant-Modified Zeolite Authors: Joshua A. Simpson and Robert S. Bowman, New Mexico Technological University, Socorro, NM Venue: 44th Annual Meeting of the Clay Minerals Society in Santa Fe, NM, June 3–7, 2007 (http://www.clays.org/home/HomeAnnualMeeting.html [external site]). Abstract: Surfactant-modified zeolite (SMZ) has been shown to effectively remove benzene, toluene, ethylbenzene, and xylene (BTEX) from water generated during oil and natural gas production (produced water). The BTEX sorption isotherms are linear and noncompetitive, suggesting that the removal mechanism is partitioning into the surfactant’s hydrophobic bilayer formed on SMZ. Even though BTEX sorption in batch systems is rapid, chemical equilibrium models do not accurately describe BTEX transport through packed beds of SMZ. Comparison with transport of a nonreactive tracer (tritium) suggests that two-site, diffusive nonequilibrium sorption-desorption controls BTEX transport. We conducted batch experiments with SMZ to determine the nonequilibrium sorption kinetics of each BTEX constituent. The kinetic measurements were used to parameterize a nonequilibrium transport model to predict BTEX removal under varying flow conditions. The accuracy of predictions is being tested using laboratory column experiments with produced water from the San Juan Basin of New Mexico

192

A review of biomass integrated-gasifier/gas turbine combined cycle technology and its  

E-Print Network (OSTI)

A review of biomass integrated-gasifier/gas turbine combined cycle technology and its application Copersucar, CP 162, Piracicaba, SP ­ Brazil ­ 13400-970 Biomass integrated-gasifier/gas turbine combined-from-sugarcane program. 1. Introduction The biomass integrated-gasifier/gas turbine combined cy- cle (BIG

193

NATURAL GAS REBURNING TECHNOLOGY FOR NOx REDUCTION FROM MSW COMBUSTION SYSTEMS  

E-Print Network (OSTI)

NATURAL GAS REBURNING TECHNOLOGY FOR NOx REDUCTION FROM MSW COMBUSTION SYSTEMS ABSTRACf CRAIG A series, injection of up to 15% (HHV basis) natural gas reduced NOx by 50-70% while maintain ing, Illinois DAVID G. LINZ Gas Research Institute Chicago, Illinois ducing NOx emISSIons from municipal solid

Columbia University

194

Economic Implications of Natural Gas Vehicle Technology in U.S. Private Automobile Transportation  

E-Print Network (OSTI)

is as a result of the more expensive fuel storage tank required to store natural gas safely and effectively). Because of the relative density of natural gas and size of CNG storage containers, CNG vehicles typically1 Economic Implications of Natural Gas Vehicle Technology in U.S. Private Automobile Transportation

195

NETL: News Release - DOE, Penn State To Establish Gas Storage Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

September 11, 2003 September 11, 2003 DOE, Penn State To Establish Gas Storage Technology Consortium Goal is to Improve Performance of the Nation's Underground Gas Storage Infrastructure Map of U.S. natural gas storage sites - click for larger image FOSSIL FACT: The nation's gas industry stores natural gas in more than 400 underground storage reservoirs and salt caverns throughout the country. Click here for larger image UNIVERSITY PARK , PA - The Pennsylvania State University has been selected by the U.S. Department of Energy to establish and operate an underground gas storage technology consortium. The agreement between Penn State and DOE's National Energy Technology Laboratory Strategic Center for Natural Gas will last four-and-a-half years at a total cost of $3 million. The first phase of the agreement will last

196

DOE-Sponsored Technology Enhances Recovery of Natural Gas in Wyoming |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Sponsored Technology Enhances Recovery of Natural Gas in Sponsored Technology Enhances Recovery of Natural Gas in Wyoming DOE-Sponsored Technology Enhances Recovery of Natural Gas in Wyoming March 26, 2009 - 1:00pm Addthis Washington, DC --Research sponsored by the U.S. Department of Energy (DOE) Oil and Natural Gas Program has found a way to distinguish between groundwater and the water co-produced with coalbed natural gas, thereby boosting opportunities to tap into the vast supply of natural gas in Wyoming as well as Montana. In a recently completed project, researchers at the University of Wyoming used the isotopic carbon-13 to carbon-12 ratio to address environmental issues associated with water co-produced with coalbed natural gas. The research resulted in a patent application for this unique use of the ratio.

197

DOE-Sponsored Technology Enhances Recovery of Natural Gas in Wyoming |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technology Enhances Recovery of Natural Gas in Technology Enhances Recovery of Natural Gas in Wyoming DOE-Sponsored Technology Enhances Recovery of Natural Gas in Wyoming March 26, 2009 - 1:00pm Addthis Washington, DC --Research sponsored by the U.S. Department of Energy (DOE) Oil and Natural Gas Program has found a way to distinguish between groundwater and the water co-produced with coalbed natural gas, thereby boosting opportunities to tap into the vast supply of natural gas in Wyoming as well as Montana. In a recently completed project, researchers at the University of Wyoming used the isotopic carbon-13 to carbon-12 ratio to address environmental issues associated with water co-produced with coalbed natural gas. The research resulted in a patent application for this unique use of the ratio. An added benefit of the project, which was managed by the National Energy

198

Assisting Transit Agencies with Natural Gas Bus Technologies  

DOE Green Energy (OSTI)

A 2-page fact sheet summarizing the U.S. Department of Energy Natural Gas Transit Users Group, which provides assistance to transit agencies implementing natural gas vehicles into their fleets.

Not Available

2005-04-01T23:59:59.000Z

199

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Oceanic gas hydrate dissociation in response to climate change and the fate of hydrate-derived methane Oceanic gas hydrate dissociation in response to climate change and the fate...

200

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Project This presentation is related to the NETL project DE-FC26-05NT15551, Coalbed Natural Gas Produced Water Treatment Using Gas Hydrate Formation at the Wellhead. The...

Note: This page contains sample records for the topic "gas revolution technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

for the purpose of predicting how natural gas hydrates affect the safety of deepwater oil and gas E&P operations. In addition, the project is providing data that can be used in...

202

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

of methane from hydrate and associated free-gas accumulations in areas of existing oil and gas infrastructure on the Alaska North Slope. The project will develop and test...

203

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Low Temperature X-ray Diffraction Study of Natural Gas Hydrate Samples from the Gulf of Mexico Low Temperature X-ray Diffraction Study of Natural Gas Hydrate Samples from the Gulf...

204

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Scientific Objectives of the Gulf of Mexico Gas Hydrate JIP Leg II Drilling Scientific Objectives of the Gulf of Mexico Gas Hydrate JIP Leg II Drilling Authors: E. Jones, T....

205

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Grain-Scale Study of Hydrate Formation in Sediments from Methane Gas: A Coupled Fluid-Solid Interaction Model Grain-Scale Study of Hydrate Formation in Sediments from Methane Gas:...

206

Available Technologies: CO2 As Cushion Gas for Compressed Air ...  

APPLICATIONS OF TECHNOLOGY: Energy storage for intermittent renewable energy sources (wind, solar) Carbon sequestration; ADVANTAGES:

207

Available Technologies: TRAMS: A New Tracer Gas Airflow ...  

APPLICATIONS OF TECHNOLOGY: Balancing of airflows in heating, ventilation, air conditioning (HVAC) systems in commercial buildings;

208

Technology options and effective policies to reduce greenhouse gas  

E-Print Network (OSTI)

in increased security of supply - depending on the role of natural gas. When Europe's energy system faces there is a great deal of uncertainty to this assumption. Natural gas prices within Europe, although not explicitly policy. However, in this case, renewables, natural gas and advanced coal- fired plants with CCS are key

209

TITLE OF THE CD (English): OIML R 137-1 and -2 Gas meters ...  

Science Conference Proceedings (OSTI)

... gas meters only) volume of gas corresponding to one full revolution of the ... 5.11 Overload flow Gas meters with internal moving parts shall meet the ...

2010-10-21T23:59:59.000Z

210

What is needed for the steam revolution  

E-Print Network (OSTI)

In four sequences, standing beside a huge steam wheel, Simon Schaffer discusses some of the things that are needed for the development of the steam revolution. These include reliable cylinders (from gun manufacture), good boilers ( from brewing...

Dugan, David

2004-08-18T23:59:59.000Z

211

Wind Revolutions LLC | Open Energy Information  

Open Energy Info (EERE)

Revolutions LLC Revolutions LLC Jump to: navigation, search Name Wind Revolutions LLC Place Denver, Colorado Zip 80202 Sector Wind energy Product Wind Revolutions is a wind energy project developer with three projects currently under development in Wyoming and three other projects in early stages in California, New Mexico, and Arizona. Coordinates 39.74001°, -104.992259° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":39.74001,"lon":-104.992259,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

212

2 Int. J. Oil, Gas and Coal Technology, Vol. 2, No. 1, 2009 Copyright 2009 Inderscience Enterprises Ltd.  

E-Print Network (OSTI)

2 Int. J. Oil, Gas and Coal Technology, Vol. 2, No. 1, 2009 Copyright © 2009 Inderscience, Gas, and Coal Technology, Vol. 2, No. 1, pp.2­23. Biographical notes: Shahab D. Mohaghegh is currently

Mohaghegh, Shahab

213

Int. J. Oil, Gas and Coal Technology, Vol. 1, Nos. 1/2, 2008 65 Copyright 2008 Inderscience Enterprises Ltd.  

E-Print Network (OSTI)

Int. J. Oil, Gas and Coal Technology, Vol. 1, Nos. 1/2, 2008 65 Copyright © 2008 Inderscience using neural networks', Int. J. Oil, Gas and Coal Technology, Vol. 1, Nos. 1/2, pp.65­80. Biographical

Mohaghegh, Shahab

214

AVESTAR® - Shale Gas Processing (SGP)  

NLE Websites -- All DOE Office Websites (Extended Search)

Shale Gas Processing (SGP) Shale Gas Processing (SGP) SPG The shale gas revolution is transforming America's energy landscape and economy. The shale gas boom, including the Marcellus play in Appalachia, is driving job creation and investment in the energy sector and is also helping to revive other struggling sectors of the economy like manufacturing. Continued growth in domestic shale gas processing requires that energy companies maximize the efficiency and profitability from their operations through excellent control and drive maximum business value from all their plant assets, all while reducing negative environmental impact and improving safety. Changing demographics and rapidly evolving plant automation and control technologies also necessitate training and empowering the next-generation of shale gas process engineering and

215

Gas Mileage of 1999 Vehicles by Quantum Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

9 Quantum Technologies Vehicles EPA MPG MODEL City Comb Hwy 1999 Quantum Technologies Chevrolet Cavalier 4 cyl, 2.2 L, Automatic 3-spd, Regular Gasoline Compare 1999 Quantum...

216

Microbial Fuel Cells Offer Innovative Technology for Oil, Gas ...  

Microbial Fuel Cells Offer Innovative Technology ... where organics and salt contaminate water in significant amounts during fossil fuels production.

217

Gas Analysis Of Geothermal Fluid Inclusions- A New Technology...  

Open Energy Info (EERE)

exploration. The knowledge of gained by this program can be applied to geothermal exploration, which may expand geothermal production. Knowledge of the gas contents in...

218

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Authors: Yongkoo Seol and Timothy J. Kneafsey Venue: 6th International Conference on Gas Hydrates (ICGH 2008), Vancouver, British Columbia, CANADA, July 6-10, 2008. http:...

219

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

with the bulk water phase, anticipating preferential growth of methane hydrate there. Gas invasion of sediments is one mechanism by which methane hydrates are believed to form....

220

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

and environmentally sound regulation of the exploration and production of natural gas and crude oil. The items envisioned for the IOGCC to undertake are national in scope....

Note: This page contains sample records for the topic "gas revolution technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

behavior of oceanic Hydrate Bearing Sediments (HBS), during depressurization-induced gas production in general, and potential wellbore in-stability and casing deformation in...

222

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

before the installation of facilities for hydrate deposits can proceed, and if gas production from hydrate deposits is to become reality. HBS are often unconsolidated, and are...

223

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

possibility. This view began to change in recent years with the realization that this unconventional resource could possibly be developed with existing conventional oil and gas...

224

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

strength and acoustic properties of repressurized samples from the 2006 National Gas Hydrate Program of India Expedition Triaxial strength and acoustic properties of...

225

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation  

NLE Websites -- All DOE Office Websites (Extended Search)

to create a computerized database inventory of compressor engines being used in the oil and natural gas exploration and production industry to evaluate emissions control...

226

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

and quantification of the methane hydrate resource potential associated with the Barrow Gas Field Characterization and quantification of the methane hydrate resource potential...

227

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

of Geology, Mining, and Minerals. Venue: Society of Petroleum Engineers Asia Pacific Oil & Gas Conference in Jakarta, Indonesia, October 30November 1, 2007 (http:...

228

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

mechanics Authors: Antone K. Jain and Ruben Juanes Venue: International Conference on Gas Hydrates, Vancouver, Canada, July 7-10, 2008. ( http:www.icgh.org external site )...

229

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

the dominant microbial communities in marine sediments containing high concentrations of gas hydrates Distribution of the dominant microbial communities in marine sediments...

230

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation  

NLE Websites -- All DOE Office Websites (Extended Search)

II: Subsurface sequestration of methane-derived carbon in gas-hydrate-bearing marine sediments HyFlux - Part II: Subsurface sequestration of methane-derived carbon in...

231

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Reservoirs Authors: J. Phirani. & K. K. Mohanty Venue: 6th International Conference on Gas Hydrates (ICGH 2008), Vancouver, British Columbia, CANADA, July 6-10, 2008. http:...

232

Advanced Acid Gas Separation Technology for the Utilization of...  

NLE Websites -- All DOE Office Websites (Extended Search)

can be adapted to carbon dioxide (CO 2 ) capture while supplying synthesis gas (syngas) to produce power, hydrogen (H 2 ), chemical products or combinations thereof....

233

Int. J. Oil, Gas and Coal Technology, Vol. 5, No. 1, 2012 1 Copyright 2012 Inderscience Enterprises Ltd.  

E-Print Network (OSTI)

Int. J. Oil, Gas and Coal Technology, Vol. 5, No. 1, 2012 1 Copyright © 2012 Inderscience Reservoir Modelling of Oil and Gas Producing Shale Reservoirs; Case Studies, Int. J. Oil, Gas, and Coal

Mohaghegh, Shahab

234

Texas Revolution Introduction: In this lesson, students will play a game to represent the Texas Revolution.  

E-Print Network (OSTI)

Texas Revolution Introduction: In this lesson, students will play a game to represent the Texas to use in conjunction with teaching the battles of the Texas Revolution. A large area is needed the students into two teams: the Mexican Army and the Texas Army. Line each team up, shoulder to shoulder

Wilkins, Neal

235

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Mechanical strength and seismic property measurements of hydrate-bearing sediments Mechanical strength and seismic property measurements of hydrate-bearing sediments Mechanical strength and seismic property measurements of hydrate-bearing sediments (HBS) during hydrate formation and loading tests (OTC 19559) Authors: Seiji Nakagawa (speaker), Timothy J. Kneafsey, and George J. Moridis Venue: 2008 Offshore Technology Conference, Houston, Texas, May 5-8, 2008 http://www.spe.org and http://www.smenet.org [external sites] Abstract: An on-going effort on conducting laboratory triaxial compression tests on synthetic methane hydrate-bearing sediment cores is presented. Methane hydrate is formed within a sand pack inside a test cell under controlled temperature and confining stress, and triaxial compression tests are performed while monitoring seismic properties. A unique aspect of the experiment is that the formation and dissociation of hydrate in a sediment core, and the failure of the sample during loading tests, can be monitored in real time using both seismic waves and x-ray CT imaging. For this purpose, a specially designed triaxial (geomechanical) test cell was built. This cell allows for conducting seismic wave measurements on a sediment core using compressional and shear (torsion) waves. Concurrently, CT images can be obtained through an x-ray-transparent cell wall. These are used to determine the porosity distribution within a sample owing to both original sand packing and formation of hydrate in the pore space. For interpreting the results from both seismic measurements and geomechanical tests, characterization of sample heterogeneity can be critically important. In this paper, the basic functions of the test cell are presented, with the results of preliminary experiments using non-hydrate bearing sandpack and sandstone core. These measurements confirmed that (1) clear x-ray images of gas-fluid boundaries within a sediment/rock core can be obtained through a thick aluminum test cell wall, (2) the test cell functions correctly during loading tests, and (3) both compressional and shear waves can be measured during a loading test. Further experiments using methane-hydrate-bearing samples will be presented at the conference

236

DOE Technology Successes - "Breakthrough" Gas Turbines | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE Technology Successes - "Breakthrough" Gas Turbines DOE Technology Successes - "Breakthrough" Gas Turbines DOE Technology Successes - "Breakthrough" Gas Turbines For years, gas turbine manufacturers faced a barrier that, for all practical purposes, capped power generating efficiencies for turbine-based power generating systems. The barrier was temperature. Above 2300 degrees F, available cooling technologies were insufficient to protect the turbine blades and other internal components from heat degradation. Since higher temperatures are the key to higher efficiencies, this effectively limited the generating efficiency at which a turbine power plant could convert the energy in the fuel into electricity. The Department of Energy's Office of Fossil Energy took on the challenge of turbine temperatures in 1992, and nine years later, its private sector

237

Environmental benefits of advanced oil and gas exploration and production technology  

SciTech Connect

THROUGHOUT THE OIL AND GAS LIFE CYCLE, THE INDUSTRY HAS APPLIED AN ARRAY OF ADVANCED TECHNOLOGIES TO IMPROVE EFFICIENCY, PRODUCTIVITY, AND ENVIRONMENTAL PERFORMANCE. THIS REPORT FOCUSES SPECIFICALLY ON ADVANCES IN EXPLORATION AND PRODUCTION (E&P) OPERATIONS.

1999-10-01T23:59:59.000Z

238

Impacts of Unconventional Gas Technology in the Annual Energy Outlook 2000  

Reports and Publications (EIA)

This paper describes the methodology used in the National Energy Modeling System (NEMS) to represent unconventional gas technologies and their impacts on projections in the Annual EnergyOutlook 2000 (AEO2000).

Information Center

2000-11-01T23:59:59.000Z

239

New Membrane Technology Boosts Efficiency in Industrial Gas Processes  

Energy.gov (U.S. Department of Energy (DOE))

Fact sheet from Membrane Technology and Research, Inc. about its pilot-scale industrial membrane system that was funded by the SBIR program.

240

Why We Need Better Ethics for Emerging Technologies  

Science Conference Proceedings (OSTI)

Technological revolutions are dissected into three stages: the introduction stage, the permeation stage, and the power stage. The information revolution is a primary example of this tripartite model. A hypothesis about ethics is proposed, namely, ethical ...

James H. Moor

2005-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "gas revolution technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Integrated Warm Gas Multicontaminant Cleanup Technologies for Coal-Derived Syngas  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Warm Gas Multicontaminant Integrated Warm Gas Multicontaminant Cleanup Technologies for Coal-Derived Syngas Description Integrated Gasification Combined Cycle (IGCC) technology offers a means to utilize coal -the most abundant fuel in the United States-to produce a host of products, ranging from electricity to value-added chemicals like transportation fuels and hydrogen, in an efficient, environmentally friendly manner. However, the overall cost (capital, operating,

242

Natural Gas Basics, Vehicle Technologies Program (VTP) (Fact...  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

in a tank at a pressure of 3,000 to 3,600 pounds per square inch. Liquefied natural gas (LNG) is super- cooled and stored in its liquid phase at -260F in special insulated tanks....

243

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

project DE-FC26-06NT42950, Harsh-Environment Electronics Packaging for Downhole Oil & Gas Exploration, is to develop new packaging techniques for downhole electronics that...

244

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

(speaker); Hunter, Robert B., Arctic Slope Regional Corp. Venue: 9th Annual Far North Oil & Gas Forum, Calgary, Alta., November 26-27, 2007 (http:www.insightinfo.com...

245

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

appear to be a good choice as a replacement for traditional fossil fuelscoal, oil, and natural gas. But the energy output-to-input ratio analysis for the crop-to-fuel...

246

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation  

NLE Websites -- All DOE Office Websites (Extended Search)

Designing a Pilot-Scale Experiment for the Production of Natural Gas Hydrates and Sequestration of CO2 in Geologic Reservoirs Designing a Pilot-Scale Experiment for the Production...

247

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Hydrate Energy resource Studies in the United States Gas Hydrate Energy resource Studies in the United States Authors: T.Collett (USGS), R. Boswell (DOE), K. Rose (DOE), W. Agena...

248

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

of Class 2 and Class 3 Hydrate Deposits during Co-Production with Conventional Gas The Performance of Class 2 and Class 3 Hydrate Deposits during Co-Production with...

249

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

C. Ruppel and R. G. Loucks (http:www.aapg.org) Abstract: The Woodford Formation, a key oil and gas source rock in the Permian Basin of Texas and New Mexico, is part of an...

250

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

analysis of the composition of volatile hydrocarbons, including methane, ethane, and propane and fixed natural gases (i.e., O2, CO2, and N2+Ar) from headspace void gas and gases...

251

Office of Fossil Energy Oil & Natural Gas Technology DOE Award...  

NLE Websites -- All DOE Office Websites (Extended Search)

with the top of the gas hydrate stability field. Average plume methane, ethane, and propane concentrations in the mixed layer are 7, 630, and 9,540 times saturation,...

252

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Pore-Scale Mechanistic Study of the Preferential Mode of Hydrate Formation in Sediments: Fluid Flow Aspects Pore-Scale Mechanistic Study of the Preferential Mode of Hydrate Formation in Sediments: Fluid Flow Aspects Pore-Scale Mechanistic Study of the Preferential Mode of Hydrate Formation in Sediments: Fluid Flow Aspects Authors: Javad Behseresht, Masa Prodanovic, and Steven Bryant, University of Texas at Austin. Venue: American Geophysical Union fall meeting, San Francisco, CA, December 10-14, 2007 (http://www.agu.org/meetings/fm07/ [external site]). Abstract: A spectrum of behavior is encountered in ocean sediments bearing methane hydrates, ranging from essentially static accumulations where hydrate and brine co-exist, to active cold seeps where hydrate and a methane gas phase co-exist in the hydrate stability zone (HSZ). In this and a companion paper (Jain and Juanes), the researchers describe methods to test the following hypothesis: The coupling between drainage and fracturing, both induced by pore pressure, determines whether methane gas entering the HSZ is converted completely to hydrate. The researchers will describe a novel implementation of the level set method to determine the capillarity-controlled displacement of brine by gas from sediment and from fractures within the sediment. Predictions of fluid configurations in infinite-acting-model sediments indicate that the brine in drained sediment (after invasion by methane gas) is better connected than previously believed. This increases the availability of water and the rate of counter-diffusion of salinity ions, thus relaxing the limit on hydrate build-up within the gas-invaded grain matrix. Simulated drainage of a fracture in sediment shows that points of contact between fracture faces are crucial. They allow residual water saturation to remain within an otherwise gas-filled fracture. Simulations of imbibition—which can occur, for example, after drainage into surrounding sediment reduces gas phase pressure in the fracture—indicate that the gas/water interfaces at contact points significantly shift the threshold pressures for withdrawal of gas. During both drainage and imbibition, the contact points greatly increase water availability for hydrate formation within the fracture. The researchers will discuss coupling this capillarity-controlled displacement model with a discrete element model for grain-scale mechanics. The coupled model provides a basis for evaluating the macroscopic conditions (thickness of gas accumulation below the hydrate stability zone, average sediment grain size, principal earth stresses) favoring co-existence of methane gas and hydrate in the HSZ. Explaining the range of behavior is useful in assessing resource volumes and evaluating pore-to-core scale flow paths in production strategies

253

Assessment of Gas Turbine Combustion Dynamics Monitoring Technologies: Interim Report  

Science Conference Proceedings (OSTI)

This report examines commercially available combustion dynamics monitoring systems (CDMS) and monitoring centers for use on gas turbine engines, specifically 7FA, 501F/5000F/8000H engines. The report provides a current review of combustion monitoring issues and methods, details of operation and available features for various CDMS, including, interviews with equipment suppliers and monitoring center providers, and end-user interviews.BackgroundGas turbines are ...

2013-12-18T23:59:59.000Z

254

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Reactive transport modeling of oceanic gas hydrate instability and dissociation in response to climate change Reactive transport modeling of oceanic gas hydrate instability and dissociation in response to climate change Reactive transport modeling of oceanic gas hydrate instability and dissociation in response to climate change Authors: Matthew T. Reagan and George J. Moridis Venue: 6th International Conference on Gas Hydrates 2008, Vancouver, British Columbia, July 9-12, 2008 (http://www.icgh.org [external site]) Abstract: Paleoceanographic evidence has been used to postulate that methane from oceanic hydrates may have had a significant role in regulating past global climate. The implication is that global oceanic deposits of methane gas hydrate is the main culprit for a sequence of rapid global warming affects that occurred during the late Quaternary period. However, the behavior of contemporary oceanic methane hydrate deposits subjected to rapid temperature changes, like those predicted under future climate change scenarios, is poorly understood. To determine the fate of the carbon stored in these hydrates, we performed coupled thermo-hydrological-chemical simulations of oceanic gas hydrate accumulations subjected to temperature changes at the seafloor, and assessed the potential for methane release into the ecosystem. Our modeling analysis considered the properties of benthic sediments, the saturation and distribution of the hydrates, the ocean depth, the initial seafloor temperature, and the effects of benthic biogeochemical activity. The results show that while many deep hydrate deposits are indeed stable during periods of rapid ocean temperature changes, shallow deposits (such as those found in arctic regions or in the Gulf of Mexico) can undergo rapid dissociation and produce significant carbon fluxes over a period of decades. These fluxes may exceed the ability of the seafloor environment (via anaerobic oxidation of methane and the formation of carbonates) to sequester the released carbon. This model will provide a source term to regional or global climate models in order to assess the coupling of gas hydrate deposits to changes in the global climate.

255

New Years Revolutions | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

New Years Revolutions New Years Revolutions New Years Revolutions January 3, 2012 - 9:42am Addthis Drew Bittner Web Manager, Office of Energy Efficiency and Renewable Energy Happy New Year to all you Energy Savers out there! Now that 2012 calendars are up and we (hopefully) remember to use '12 instead of '11 where necessary (does anyone write checks anymore?), it's time to think about the New Year's resolutions we made and are (hopefully again) still keeping. For instance... if you've been putting off getting an energy assessment of your home, why wait? Now is a good time to find out if you have cracks, leaks or other places where heat is escaping; you can start making your home more energy efficient today. Have you put off replacing your traditional light bulbs with energy efficient ones? Well, check out our page on lighting and get started! There

256

New Years Revolutions | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Years Revolutions Years Revolutions New Years Revolutions January 3, 2012 - 9:42am Addthis Drew Bittner Web Manager, Office of Energy Efficiency and Renewable Energy Happy New Year to all you Energy Savers out there! Now that 2012 calendars are up and we (hopefully) remember to use '12 instead of '11 where necessary (does anyone write checks anymore?), it's time to think about the New Year's resolutions we made and are (hopefully again) still keeping. For instance... if you've been putting off getting an energy assessment of your home, why wait? Now is a good time to find out if you have cracks, leaks or other places where heat is escaping; you can start making your home more energy efficient today. Have you put off replacing your traditional light bulbs with energy efficient ones? Well, check out our page on lighting and get started! There

257

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Gas-hydrate concentration and uncertainty estimation from electrical resistivity logs: examples from Green Canyon, Gulf of Mexico Gas-hydrate concentration and uncertainty estimation from electrical resistivity logs: examples from Green Canyon, Gulf of Mexico Carbon isotope evidence (13C and 14C) for fossil methane-derived dissolved organic carbon from gas hydrate-bearing cold seeps Authors: Pohlman, J.W. (speaker), Coffin, R.B., and Osburn, C.L., U.S. Naval Research Laboratory, Washington, D.C.; Bauer, J.E., College of William & Mary, Williamsburg, VA; Venue: Goldschmidt 2007 Atoms to Planets conference in Cologne, Germany, August 19-24, 2007 http://www.the-conference.com/conferences/2007/gold2007/ [external site]. Abstract: No abstract available yet. Related NETL Project: The proposed research of the related NETL project DE-AI26-05NT42496, “Conducting Scientific Studies of Natural Gas Hydrates to Support the DOE Efforts to Evaluate and Understand Methane Hydrates,” is to conduct scientific studies of natural gas hydrates to support DOE efforts to evaluate and understand methane hydrates, their potential as an energy resource, and the hazard they may pose to ongoing drilling efforts. This project

258

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Production Strategies for Marine Hydrate Reservoirs Production Strategies for Marine Hydrate Reservoirs Production Strategies for Marine Hydrate Reservoirs Authors: J. Phirani. & K. K. Mohanty Venue: 6th International Conference on Gas Hydrates (ICGH 2008), Vancouver, British Columbia, CANADA, July 6-10, 2008. http://www.ichg.org/showcontent.aspx?MenuID=287 [external site]. Abstract: Large quantities of natural gas hydrate are present in marine sediments. This research is aimed at assessing production of natural gas from these deposits. We had developed a multiphase, multicomponent, thermal, 3D simulator in the past, which can simulate production of hydrates both in equilibrium and kinetic modes. Four components (hydrate, methane, water and salt) and five phases (hydrate, gas, aqueous-phase, ice and salt precipitate) are considered in the simulator. The intrinsic kinetics of hydrate formation or dissociation is considered using the Kim–Bishnoi model. Water freezing and ice melting are tracked with primary variable switch method (PVSM) by assuming equilibrium phase transition. In this work, we simulate depressurization and warm water flooding for hydrate production in a hydrate reservoir underlain by a water layer. Water flooding has been studied as a function of well spacing, well orientation, and injection temperature. Results show that depressurization is limited by the supply of heat of hydrate formation. Warm water flooding can supply this heat of formation. Gas production rate is higher for the water flooding than depressurization. Optimum configuration for wells and water temperature are identified.

259

Editorial and Introduction of the Special Issue for the Ninth International Conference on Greenhouse Gas Control Technologies in the International Journal of Greenhouse Gas Control  

Science Conference Proceedings (OSTI)

Short one page editorial to introduce the +30 peer reviewed papers contained within the Special Issue for the Ninth International Conference on Greenhouse Gas Control Technologies in the International Journal of Greenhouse Gas Control

Dooley, James J.; Benson, Sally M.; Karimjee, Anhar; Rubin, Edward S.

2010-03-01T23:59:59.000Z

260

Modeling Greenhouse Gas Energy Technology Responses to Climate Change  

Science Conference Proceedings (OSTI)

Models of the global energy system can help shed light on the competition and complementarities among technologies and energy systems both in the presence and absence of actions to affect the concentration of greenhouse gases. This paper explores the role of modeling in the analysis of technology deployment in addressing climate change. It examines the competition among technologies in a variety of markets, and explores conditions under which new markets, such as for hydrogen and carbon disposal, or modern commercial biomass, could emerge. Carbon capture and disposal technologies are shown have the potential to play a central role in controlling the cost of stabilizing the concentration of greenhouse gases, the goal of the UN Framework Convention on Climate Change.

Edmonds, James A.; Clarke, John F.; Dooley, James J.; Kim, Son H.; Smith, Steven J.

2004-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "gas revolution technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Oil & Natural Gas Technology DOE Award No.: DE-NT0005227 Final Report  

NLE Websites -- All DOE Office Websites (Extended Search)

Oil & Natural Gas Technology Oil & Natural Gas Technology DOE Award No.: DE-NT0005227 Final Report Membrane Technology for Produced Water in Lea County Submitted by: Lea County Government 100 N. Main Lovington, NM 88260 And New Mexico Institute of Mining and Technology 801 Leroy Place Socorro, NM 87801 Report Authors: Cecilia E. Nelson, Principal Investigator Lea County Government and Ashok Kumar Ghosh, Ph.D., P.E. Principal Researcher, New Mexico Institute of Mining and Technology Prepared for: United States Department of Energy National Energy Technology Laboratory Office of Fossil Energy Report Date: September 20, 2011 Reporting Period: October 1, 2008 - June 30, 2011 2 DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United

262

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Produced Water Treatment Using Gas Hydrate Formation at the Wellhead Produced Water Treatment Using Gas Hydrate Formation at the Wellhead Produced Water Treatment Using Gas Hydrate Formation at the Wellhead Authors: John and Deidre Boysen Venue: International Petroleum and Biofuels Environmental Conference, November 11-13, 2008, Albuquerque, NM cese@utulsa.edu Abstract: Economic and efficient produced water management is complex. Produced waters contain mixtures of organic and inorganic compounds, including heavy metals. Many of these constituents interfere with treatment processes that are selective for other constituents. Further, the concentrations of organic and inorganic constituents vary widely with location and producing formation. In addition, regulations related to discharge and beneficial uses vary from state to state, basin-to-basin and well location to well location.

263

Fuel Cell Technologies Office: Compressed Natural Gas and Hydrogen Fuels  

NLE Websites -- All DOE Office Websites (Extended Search)

Compressed Natural Gas and Hydrogen Fuels Workshop Compressed Natural Gas and Hydrogen Fuels Workshop Fuel experts from China, India, and the United States shared lessons learned about deploying CNG- and hydrogen-fueled vehicles in public transit fleets and the consumer sector at the Compressed Natural Gas and Hydrogen Fuels: Lessons Learned for the Safe Deployment of Vehicles workshop. The U.S. Department of Energy (DOE) and the U.S. Department of Transportation (DOT) hosted the workshop on December 10-11, 2009. Here you'll find information about the workshop's focus, agenda and notes, and presentations. Some of the following documents are available as Adobe Acrobat PDFs. Download Adobe Reader. Focus of the Workshop The workshop aimed to: Compare fuel properties-including blends-industries, and applications (e.g., product specifications, tanks, reliability, safety procedures, risk mitigation, and dispensing)

264

Gas Turbine Technology, Part B: Components, Operations and Maintenance  

E-Print Network (OSTI)

This paper builds on Part A and discusses the hardware involved in gas turbines as well as operations and maintenance aspects pertinent to cogeneration plants. Different categories of gas turbines are reviewed such as heavy duty aeroderivative, single and split shaft. The pros and cons of different types are reviewed. Gas turbine component types - axial and centrifugal compressors and different turbine types, along with combustor types will be discussed. Important considerations during machine specifications are also reviewed. Practical aspects such as coatings, materials, fuel handling and auxiliary systems will also be highlighted. Operations and maintenance aspects including Preventative Maintenance, Repairs, Fuel and Air Filtration, Compressor Washing and Reliability is discussed. Typical operating and maintenance costs are provided. This paper presents an extensive bibliography to enable readers to follow up any topic in detail.

Meher-Homji, C. B.; Focke, A. B.

1985-05-01T23:59:59.000Z

265

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Physical properties of sediment from the 2006 National Gas Hydrate Program expedition offshore India Physical properties of sediment from the 2006 National Gas Hydrate Program expedition offshore India Physical properties of sediment from the 2006 National Gas Hydrate Program expedition offshore India Authors: Winters, W.J., (U.S. Geological Survey, speaker), Gomes, M., Giosan, L., Johnson, J., Kastner, M., Torres, M.E., Long, P.E., Schaef, H.T., Rose, K., and the NGHP-01 Shipboard Scientific Party. Venue: India’s Directorate General of Hydrocarbons’ International Conference on Gas Hydrates in Nodia (New Delhi), India, February 6–8, 2008 (http://www.dghindia.org/site/pdfattachments/upcomingevents/Updated_Programme_gAS[1].pdf [PDF-external site]). Abstract: The scientific goals of the NGHP Expedition 01 physical properties program are to a) constrain baseline index properties of host sediment; b) ground-truth well-log, seismic, and other shipboard data sets; c) relate textural characteristics to gas hydrate occurrence and small-scale porous media effects; and d) relate index properties and textural analyses to gas hydrate occurrence and regional sedimentologic interpretations. During the shipboard phase of NGHP-01, baseline bulk physical properties, such as water content, grain density, bulk density, and porosity, were determined on more than 1,800 sediment samples from 14 sites located in four study areas. Overall, physical properties change more significantly near the seafloor, then at a much more gradual rate with depth. The transition depth varies between sites but can range from about 12 to as deep as 200 meters beneath the seafloor. In addition, shear strength, electrical resistivity, magnetic susceptibility, thermal conductivity, and acoustic velocity measurements were conducted to further characterize the sediment. These measurements, when combined with sedimentologic and geochemical studies, delineate the role of the host sediment in hydrate formation and occurrence and are used in modeling the response of hydrate-bearing sediment to natural change or drilling operations. Strong correlation typically exists between physical properties determined from shipboard analyses and well-log studies. More than 500 shore-based grain-size analyses have been conducted that indicate that most sediment is characterized as clayey silt to silty clay with a median grain size that is near or slightly greater than the silt-clay boundary. Grain-size analyses are being conducted on samples identified by infrared imaging as having high concentrations of gas hydrate in recovered core samples. These analyses will be used to study porous-media effects and geologic controls on the occurrence of gas hydrate in situ.

266

Safety research plan for gas-supply technologies. Final report, March 1982-February 1983  

SciTech Connect

The objective of this study was to develop a multiyear research plan addressing the safety issues of the following gas supply technologies: conventional natural gas, including deep and sour gas wells; unconventional natural gas (Devonian shale, tight gas sands, coalbed methane, and geopressured methane); SNG from coal (surface and in situ), and SNG from biomass. A total of 51 safety issues were identified in the initial review. These safety issues were screened to eliminate those hazards which appeared to be relatively insignificant in terms of accident severity or frequency, or because the potential for resolving the problem through research was considered very low. Twenty-six remaining safety issues were prioritized, and of these, 9 were selected as priority research projects: two under conventional gas; one under unconventional natural gas; and six under SNG from coal. No safety research issues in the biomass area appear to warrant priority consideration.

Tipton, L.M.; Junkin, P.D.

1983-06-01T23:59:59.000Z

267

Climate VISION: PrivateSector Initiatives: Oil and Gas: Technology Pathways  

Office of Scientific and Technical Information (OSTI)

Technology Pathways Technology Pathways The oil and gas industry is a very diverse and complex sector of the energy economy. It ranges from exploration to production, processing, transportation, and distribution. All of these segments are elements of the natural gas industry and the oil industry but are different for oil than for natural gas. An example of a technology pathway for the oil refining industry is the Petroleum Refining Vision and Roadmap, which was developed through a joint effort of government and industry. Other technology roadmaps of relevance to Climate VISION participants either are being developed or will be developed in the future. The oil refining example is provided initially. Others will be added as they become available. Petroleum refining is one of nine energy-intensive industries that is

268

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation  

NLE Websites -- All DOE Office Websites (Extended Search)

II: Subsurface sequestration of methane-derived carbon in gas-hydrate-bearing marine sediments II: Subsurface sequestration of methane-derived carbon in gas-hydrate-bearing marine sediments HyFlux - Part II: Subsurface sequestration of methane-derived carbon in gas-hydrate-bearing marine sediments Authors: Naehr, T.H., Asper, V., Garcia, O., Kastner, M., Leifer, I., MacDonald, I.R., Solomon, E., Yvon-Lewis, S., and Zimmer, B. Venue: AGU Fall Meeting, San Francisco, CA, December 15-19 2008 -- Session OS25: Methane Flux from Naturally Occurring Marine Gas Hydrates http://www.agu.org Abstract: The recently funded DOE/NETL study "HyFlux: Remote sensing and sea-truth measurements of methane flux to the atmosphere" (see MacDonald et al.: HyFlux - Part I) will combine sea surface, water column and shallow subsurface observations to improve our estimates of methane flux from submarine seeps and associated gas hydrate deposits to the water column and atmosphere along the Gulf of Mexico continental margin and other selected areas world-wide. As methane-rich fluids rise towards the sediment-water interface, they will interact with sulfate-rich pore fluids derived from overlying bottom water, which results in the formation of an important biogeochemical redox boundary, the so-called sulfate-methane interface, or SMI. Both methane and sulfate are consumed within the SMI and dissolved inorganic carbon, mostly bicarbonate (HCO3-) and hydrogen sulfide are produced, stimulating authigenic carbonate precipitation at and immediately below the SMI. Accordingly, the formation of authigenic carbonates in methane- and gas-hydrate-rich sediments will sequester a portion of the methane-derived carbon. To date, however, little is known about the quantitative aspects of these reactions. Rates of DIC production are not well constrained, but recent biogeochemical models indicate that CaCO3 precipitation rates may be as high as 120 µmol cm-2a-1. Therefore, AOM-driven carbonate precipitation must be considered when assessing the impact of gas-hydrate-derived methane on the global carbon cycle.

269

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on Gas  

NLE Websites -- All DOE Office Websites (Extended Search)

Gas Hydrate Research and Stratigraphic Test Results, Milne Point Unit, Alaska North Slope Gas Hydrate Research and Stratigraphic Test Results, Milne Point Unit, Alaska North Slope Gas Hydrate Research and Stratigraphic Test Results, Milne Point Unit, Alaska North Slope Authors: Robert Hunter (ASRC Energy), Scott Digert (BPXA), Tim Collett (USGS), Ray Boswell (USDOE) Venue: AAPG National Meeting Gas Hydrate session, Oral Presentation, San Antonio, TX, April 22, 2008 (http://www.AAPG.org [external site]) Abstract: This BP-DOE collaborative research project is helping determine whether or not gas hydrate can become a technically and economically recoverable gas resource. Reservoir characterization, development modeling, and associated studies indicate that 0-0.34 trillion cubic meters (TCM) gas may be technically recoverable from the estimated 0.92 TCM gas-in-place within the Eileen gas hydrate accumulation on the Alaska North Slope (ANS). Reservoir modeling indicates sufficient potential for technical recovery to justify proceeding into field operations to acquire basic reservoir and fluid data from the Mount Elbert gas hydrate prospect in the Milne Point Unit (MPU). Successful drilling and data acquisition in the Mount Elbert-01 stratigraphic test well was completed during February 3-19, 2007. Data was acquired from 131 meters of core (30.5 meters gas hydrate-bearing), extensive wireline logging, and wireline production testing operations using Modular Dynamics Testing (MDT). The stratigraphic test validated the 3D seismic interpretation of the MPU gas hydrate-bearing Mount Elbert prospect. Onsite core sub- sampling preserved samples for later analyses of interstitial water geochemistry, physical properties, thermal properties, organic geochemistry, petrophysics, and mechanical properties. MDT testing was accomplished within two gas hydrate-bearing intervals, and acquired during four long shut-in period tests. Four gas samples and one pre-gas hydrate dissociation formation water sample were collected. MDT analyses are helping to improve understanding of gas hydrate dissociation, gas production, formation cooling, and long-term production potential as well as help calibrate reservoir simulation models.

270

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Simulation of the system behavior of hydrate-bearing geologic media involves solving fully coupled mass and heat balance equations. The models need to simulate equilibrium or kinetic processes of hydrate formation and dissociation. TOUGH+HYDRATE is a widely used code for gas hydrate simulations. The code can model non-isothermal gas release, phase changes and flow of fluids and heat. It accounts for up to four mass components and four possible phases. Because hydrate simulations require intensive computational effort, many studies that involve serial processors are limited by problems of complexity and scale. With the growing availability of multi-core CPUs, Linux clusters, and super-computers, the use of parallel processing methods is a distinct advantage. This study develops a domain decomposition approach for large-scale gas hydrate simulations using parallel computation. The approach partitions the simulation domain into small sub-domains. The full simulation domain is simulated integrally by using multiple processes. Each process will be in charge of one portion of the simulation domain for updating thermophysical properties, assembling mass and energy balance equations, solving linear equation systems, and performing other local computations. The linear equation systems are solved in parallel by multiple processes with a parallel linear solver. The multiple processes are run in parallel on shared- or distributed memory multiple-CPU computers. A hybrid approach, running multiple processes in each CPU and using multiple CPUs, may achieve additional speedup. During calculations, communication between processes is needed to update sub-domain boundary parameters. An efficient inter-process communication scheme has been developed. The new approach was implemented into the TOUGH+HYDRATE code and demonstrates excellent speedup and very good scalability. For many large-scale problems, this method can obtain linear or super-linear speedup. This paper will show applications of the new approach to simulate three dimensional field-scale models for gas production from gas-hydrate

271

TECHNOLOGIES TO ENHANCE OPERATION OF THE EXISTING NATURAL GAS COMPRESSION INFRASTRUCTURE  

Science Conference Proceedings (OSTI)

This report documents work performed in Phase I of the project entitled: ''Technologies to Enhance Operation of the Existing Natural Gas Compression Infracture''. The project objective is to develop and substantiate methods for operating integral engine/compressors in gas pipeline service, which reduce fuel consumption, increase capacity, and enhance mechanical integrity. The report describes a number of potential enhancements to the existing natural gas compression infrastructure that have been identified and tested on four different integral engine/compressors in natural gas transmission service.

Anthony J. Smalley; Ralph E. Harris; Gary D. Bourn

2004-08-01T23:59:59.000Z

272

TECHNOLOGIES TO ENHANCE OPERATION OF THE EXISTING NATURAL GAS COMPRESSION INFRASTRUCTURE  

Science Conference Proceedings (OSTI)

This report documents work performed in Phase I of the project entitled: ''Technologies to Enhance Operation of the Existing Natural Gas Compression Infrastructure''. The project objective is to develop and substantiate methods for operating integral engine/compressors in gas pipeline service, which reduce fuel consumption, increase capacity, and enhance mechanical integrity. The report describes a number of potential enhancements to the existing natural gas compression infrastructure that have been identified and qualitatively demonstrated in tests on three different integral engine/compressors in natural gas transmission service.

Anthony J. Smalley; Ralph E. Harris; Gary D. Bourn

2004-03-01T23:59:59.000Z

273

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

The geomechanical response of Hydrate-Bearing Sediments (HBS) is a serious concern that needs to be addressed before the installation of facilities for hydrate deposits can proceed, and if gas production from hydrate deposits is to become reality. HBS are often unconsolidated, and are characterized by low shear strength. Heat from external sources, that cross the formation or depressurization-based production, can induce dissociation of hydrates (a strong cementing agent), and degradation of the structural stability of the HBS. Changes in pressure and temperature, phase changes, and the evolution of an expanding (and structurally weak) gas zone can significantly alter the distribution of loads in the sediments. The corresponding changes in the local stress and strain fields can result in substantial changes in the hydrologic, thermal and geomechanical properties of the system, displacement, and potentially failure.

274

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Hydraulic Fracturing and Sand Control Hydraulic Fracturing and Sand Control Hydraulic Fracturing and Sand Control Author: M. Sharma Venue: Industry Workshop, Austin, Texas, May 7, 2008 (http://www.cpge.utexas.edu) Abstract: The Hydraulic Fracturing and Sand Control project consists of a set of 9 projects (5 related to fracturing and 4 related to sand control) that are currently underway. The project began in 2006 and is planned to continue for at least 2 years (2008). Each member company contributes $50,000 per year as a grant to the University and in return receives all the research results from the projects underway. F1. Energized fractures in tight gas sands/ gas shales (Kyle Freihof, Mukul Sharma) F2. Refracturing and stress reorientation in sands / shales (Vasudev Singh, Nicolas Rousell, Mukul Sharma)

275

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation  

NLE Websites -- All DOE Office Websites (Extended Search)

A Grain-Scale Coupled Model of Multiphase Fluid Flow and Sediment Mechanics A Grain-Scale Coupled Model of Multiphase Fluid Flow and Sediment Mechanics A Grain-Scale Coupled Model of Multiphase Fluid Flow and Sediment Mechanics – Application to Methane Hydrates in Natural Systems Authors: Antone K. Jain and Ruben Juanes Venue: American Geophysical Union Fall Meeting, San Francisco, CA, December 15-19, 2008 – Special Session H06: Particle Tracking Simulation of Fluid Flow and Mass Transport. http://www.agu.org/meetings/fm08/ Abstract: A discrete element model is presented for the simulation, at the grain scale, of gas migration in brine-saturated deformable media. The model rigorously accounts for the presence of two fluids in the pore space by incorporating grain forces due to pore fluid pressures, and surface tension between fluids. The coupled model permits investigating an essential process that takes place at the base of the hydrate stability zone: the upward migration of methane in its own free gas phase. The ways in which gas migration may take place were elucidated: (1) by capillary invasion in a rigid-like medium; and (2) by initiation and propagation of a fracture. Results indicate that the main factor controlling the mode of gas transport in the sediment is the grain size, and that coarse-grain sediments favor capillary invasion, whereas fracturing dominates in fine-grain media. The results have important implications for understanding hydrates in natural systems. The results predict that, in fine sediments, hydrate will likely form in veins that follow a fracture-network pattern, and the hydrate concentration in this type of accumulations will likely be quite low. In coarse sediments, the buoyant methane gas is likely to invade the pore space more uniformly, in a process akin to invasion percolation, and the overall pore occupancy is likely to be much higher than for a fracture-dominated regime. These implications are consistent with field observations of methane hydrates in natural

276

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Geologic Framework of the 2005 Keathley Canyon Geologic Framework of the 2005 Keathley Canyon Gas Hydrate Research Well, Northern Gulf of Mexico Authors: D.R. Hutchinson, P.E. Hart, T.S. Collett, K.M. Edwards, and D.C. Twichell, U.S. Geological Survey, and F. Snyder, WesternGeco-Schlumberger. Venue: American Geophysical Union’s 2007 Joint Assembly, Acapulco, Mexico, May 22-25, 2007 (http://www.agu.org/meetings/ja07/ [external site]). Abstract: The project was located in the Casey Basin in the northern Gulf of Mexico at 1,335 m water depth. A grid of 2-D high-resolution multichannel seismic lines around the drill sites, targeted for imaging depths down to at least 1,000 m subbottom, reveals multiple disconformities that bound seven mappable seismic stratigraphic units. A major disconformity in the middle of the units stands out for its angular baselapping geometry. From the seismic and drilling data, three episodes of sedimentary deposition and deformation are inferred. The oldest episode consists of fine-grained muds deposited during a period of relative stability in the basin (Units E, F, and G). A second episode (Units C and D) consists of large vertical displacements associated with infilling and ponding of sediment. This second interval corresponds with intercalated fine and coarse-grained material in the drill hole, which sampled the thin edges of much thicker units. The final episode (Units A and B) occurred during much-subdued vertical displacement. Hemipelagic drape (Unit A) characterizes the modern seafloor deposits. The basin is mostly filled. Its sill is part of a subsiding graben that is only 10-20 m shallower than the deepest point in the basin, indicating that gravity-driven transport would mostly bypass the basin. Contemporary faulting along the basin margins has selectively reactivated an older group of faults. The intercalated sand and mud deposits of Units C and D are tentatively correlated with late Pleistocene deposition derived from the western shelf-edge delta/depocenter of the Mississippi River, which was probably most active from 320 ka to 70 ka (Winker and Booth, 2000). Gas hydrate occurs within near-vertical fractures in Units E and F of the oldest episode. The presence of sand within the gas hydrate stability zone is not sufficient to concentrate gas hydrate, even though dispersed gas hydrate occurs deeper in the fractured mud/clay-rich sections of Units E and F.

277

Long-range assessment of R and D policy for gas-related conversion technologies and unconventional natural gas resources  

Science Conference Proceedings (OSTI)

This study analyzes the energy impacts on the US energy-economy system on a set of successful R and D programs. These programs are presumed to have led to the commercialization of innovative technologies that increase the US gaseous fuels resource base and promote the development of advanced natural gas conversion technologies for residential/commercial uses. The GRI and its principal subcontractor, TRW Incorporated, provided the detailed specifications of the energy conditions for both a Base Case and an R and D Policy Case. These conditions can be broadly categorized in terms of key energy resource price assumptions, energy resource availabilities, technology characterizations and market penetration guidelines for all energy technologies. Dale W. Jorgenson Associates (DJA) developed a set of demographic and economic projections including population, employment, and real GNP growth rates. The GRI and TRW staff provided the technology characterizations for most of the gas-related technologies and a number of other technologies. The data for the remaining technology characterizations were taken, for the most part, from Bhagat et al. This report presents the energy results from the BNL/DJA energy-economy system as executed under GRI specifications. It is intended to serve as a complement to the DJA report on the macro-economic consequences of these specifications. Certain assumption incorporated in the R and D and Base scenarios relating to market penetration were identified as particularly sensitive. In light of the uncertainty inherent in them, an additional set of sensitivity runs were requested by GRI and are presented in Appendix B.

Kydes, A.S.; Rabinowitz, J.

1980-04-25T23:59:59.000Z

278

The Technology Path to Deep Greenhouse Gas Emissions Cuts by 2050: The  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Path to Deep Greenhouse Gas Emissions Cuts by 2050: The Technology Path to Deep Greenhouse Gas Emissions Cuts by 2050: The Pivotal Role of Electricity Title The Technology Path to Deep Greenhouse Gas Emissions Cuts by 2050: The Pivotal Role of Electricity Publication Type Journal Article Refereed Designation Unknown Year of Publication 2012 Authors Williams, James H., Andrew DeBenedictis, Rebecca Ghanadan, Amber Mahone, Jack Moore, William R. Morrow, Snuller Price, and Margaret S. Torn Journal Science Volume 335 Start Page 53 Issue 6064 Pagination 53-59 Date Published 01/2012 Abstract Several states and countries have adopted targets for deep reductions in greenhouse gas emissions by 2050, but there has been little physically realistic modeling of the energy and economic transformations required. We analyzed the infrastructure and technology path required to meet California's goal of an 80% reduction below 1990 levels, using detailed modeling of infrastructure stocks, resource constraints, and electricity system operability. We found that technically feasible levels of energy efficiency and decarbonized energy supply alone are not sufficient; widespread electrification of transportation and other sectors is required. Decarbonized electricity would become the dominant form of energy supply, posing challenges and opportunities for economic growth and climate policy. This transformation demands technologies that are not yet commercialized, as well as coordination of investment, technology development, and infrastructure deployment.

279

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation  

NLE Websites -- All DOE Office Websites (Extended Search)

Conditions under Which Gaseous Methane Will Fracture Ocean Sediments and Penetrate Through the Hydrate Stability Zone Conditions under Which Gaseous Methane Will Fracture Ocean Sediments and Penetrate Through the Hydrate Stability Zone Conditions under Which Gaseous Methane Will Fracture Ocean Sediments and Penetrate Through the Hydrate Stability Zone: Modeling Multiphase Flow and Sediment Mechanics at the Pore-Scale Authors: Antone K. Jain and Ruben Juanes Venue: American Geophysical Union Fall Meeting, San Francisco, CA, December 15-19, 2008 – Special Session H06: Particle Tracking Simulation of Fluid Flow and Mass Transport. http://www.agu.org/meetings/fm08/ Abstract: Two competing processes were simulated, capillary invasion and fracture opening, by which free methane gas penetrates the Hydrate Stability Zone (HSZ). In situ conditions were predicted in which the methane propagates fractures and flows all the way through the HSZ and into the ocean, bypassing hydrate formation. In the fully coupled model, the discrete element method was used to simulate the sediment mechanics, and pore fluid pressures and surface tension between the gas and brine were accounted for by incorporating additional sets of pressure forces and adhesion forces. Results indicate that given enough capillary pressure, the main factor controlling the mode of gas transport is the grain size, and show that coarse-grain sediments favor capillary invasion and widespread hydrate formation, whereas fracturing dominates in fine-grain sediments. The fracturing threshold was calculated as a function of grain size, capillary pressure, and seafloor depth, and place these results in the context of naturally-occurring hydrate

280

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on Gas  

NLE Websites -- All DOE Office Websites (Extended Search)

Hydrate Energy resource Studies in the United States Hydrate Energy resource Studies in the United States Gas Hydrate Energy resource Studies in the United States Authors: T.Collett (USGS), R. Boswell (DOE), K. Rose (DOE), W. Agena (USGS), and R. Baker (DOE) Venue: American Chemical Society Meeting, March 22-26, 2009, Salt Lake City, Utah http://portal.acs.org/portal/acs/corg/content?_nfpb=true&_pageLabel=PP_MEETINGS&node_id=86&use_sec=false&__uuid=614acbfd-ce1c-4a0b-98de-348a14738f4e [external site] Abstract: In 1982, scientists onboard the Research Vessel Glomar Challenger retrieved a meter-long sample of massive gas hydrate off the coast of Guatemala. This sample became the impetus for the first United States national research and development program dedicated to gas hydrates. By the mid 1990s, it was widely accepted that gas hydrates represented a vast storehouse of gas. Recognizing the importance of gas hydrate research and the need for coordinated efforts, Congress and the President of the United States enacted Public Law 106-193, the Methane Hydrate Research and Development Act of 2000. Authorization for this program was extended to 2010 as part of the Energy Policy Act of 2005. Many of the current gas hydrate projects in the United States are conducted within this program, which is administered by the U. S. Department of Energy in collaboration with six other U.S. federal agencies, and conducted in partnership with private industry, academic institutions, and DOE’s National Laboratories. In addition, other U.S. federal agencies conduct significant self-directed gas hydrate research; most notably the gas hydrate resource assessment activities conducted by U.S. Department of Interior agencies (the U.S. Geological Survey and the Minerals Management Service).

Note: This page contains sample records for the topic "gas revolution technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

De-Watering of Hunton Reservoirs De-Watering of Hunton Reservoirs De-Watering of Hunton Reservoirs Author: Mohan Kelkar, University of Tulsa, Tulsa, OK. Venue: Tulsa Association of Petroleum Landmen meeting in Tulsa, OK, April 19, 2007 (http://www.landman.org [external site]). Abstract: The Hunton reservoir in Oklahoma represents one of the largest discoveries in Oklahoma in recent history. Since 1995, several Hunton reservoir fields have been exploited by various operators. The principle behind this exploitation remains the same: The wells produce large quantities of water, and along with it, significant quantities of natural gas and sometimes oil. Examination of various fields producing from the Hunton reservoir indicates that the economic success from these fields is not uniform. Some fields produce significant quantities of oil, whereas some fields only produce gas. In some fields, horizontal wells work best, whereas in some other fields, vertical wells do a good job. The water production from the fields ranges from as low as few hundred barrels per day to several thousand barrels per day. In this paper, we present the results from various fields to indicate the parameters needed in a Hunton field to make it economically successful. We restrict our evaluation to parameters that can be easily measured or are readily available. These include log data (gamma ray, resistivity, neutron, and density), initial potential data, production data (oil, gas, and water—if available) and well configuration (vertical or horizontal). By analyzing the recovery of oil and gas according to various reservoir parameters, we developed a methodology for predicting the future success of the field. For example, a clear relationship exists between porosity of the rock and initial hydrocarbon saturation: The higher the oil saturation, the better the recovery factor. Initial potential is critical in determining possible recovery. Horizontal wells cost 1.5 to 2 times more than vertical wells and may not provide the additional recovery to justify the costs. The Hunton formation is extensive in Oklahoma. If we want to extend the success of some of the fields to other areas, we need clear guidelines in terms of what is needed to exploit those fields. This paper provides some of those guidelines based on the examination of the currently producing fields.

282

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Capillarity-controlled displacements in sediments with moveable grains Capillarity-controlled displacements in sediments with moveable grains Capillarity-controlled displacements in sediments with moveable grains: Implications for growth of methane hydrates Authors: Maša Prodanovic (speaker), Steven L. Bryant Venue: SPE Annual Technical Conference and Exhibition, Denver, Colorado, 21-24 September, 2008. http://www.spe.org [external site]. Abstract: We consider immiscible displacements when fluid/fluid interfaces are controlled by capillary forces. The progressive quasistatic (PQS) algorithm based on the level set method readily determines the geometry of these interfaces at the pore level. Capillary pressure generally exerts a net force on grains supporting an interface. We extend PQS to implement a kinematic model of grain displacement in response to that force. We examine the changes in the drainage curve caused by this coupling. We compute the interfacial area associated with the bulk water phase, anticipating preferential growth of methane hydrate there. Gas invasion of sediments is one mechanism by which methane hydrates are believed to form. In unconsolidated ocean sediments the capillary pressure exerted by an accumulated gas phase below the hydrate stability zone can be large enough to move grains apart. This motion alters the pore throat sizes which control subsequent drainage of the sediment. A model for the dynamics of this process is useful for assessing the competition between drainage (controlled by capillary forces) and fracturing (controlled by pore pressure and earth stresses). This in turn provides insight into the possible growth habits within the hydrate stability zone. When grains can move in response to net force exerted by the gas phase, small variations in an otherwise uniform distribution of pore throat sizes quickly lead to self-reinforcing, focused channels of gas phase. In contrast to behavior in stationary grains, the drainage curve exhibits no clear percolation threshold. Displacements in materials with broad throat size distributions also exhibit self-reinforcing channels. Behind the leading edge of the displacement front, the net force exerted on the grains tends to push them together. This effectively seals off these regions from subsequent invasion. Thus hydrate growth tends to be localized along the channel of displaced grains. This is the first quantitative grain-scale study of the drainage behavior when grains can move in response to invasion events. The coupling leads to qualitatively different displacement patterns. The method presented for studying this behavior is applicable to any granular material and to other applications, such as sand production.

283

Advanced combustion technologies for gas turbine power plants  

DOE Green Energy (OSTI)

Objectives are to develop actuators for enhancing the mixing between gas streams, increase combustion stability, and develop hgih-temperature materials for actuators and sensors in combustors. Turbulent kinetic energy maps of an excited jet with co-flow in a cavity with a partially closed exhaust end are given with and without a longitudinal or a transverse acoustic field. Dielectric constants and piezoelectric coefficients were determined for Sr{sub 2}(Nb{sub x}Ta{sub 1-x}){sub 2}O{sub 7} ceramics.

Vandsburger, U. [Virginia Polytechnic Inst. and State Univ., Blacksburg, VA (United States). Dept. of Mechanical Engineering; Roe, L.A. [Arkansas Univ., Fayetteville, AR (United States). Dept. of Mechanical Engineering; Desu, S.B. [Virginia Polytechnic Inst. and State Univ., Blacksburg, VA (United States). Dept. of Materials Science and Engineering

1995-12-31T23:59:59.000Z

284

Welding and Repair Technology Center: Gas Metal Arc Welding Lessons  

Science Conference Proceedings (OSTI)

Modern gas metal arc welding (GMAW) systems no longer operate with a symmetric, fixed pulse. The new systems have closed-loop feedback and are waveform-controlled systems that vary the arc characteristics hundreds of times per second to stabilize the arc. The main advantage of these systems is the ease of operation when manual applications are required or out-of-position welding is applied. The systems allow flexibility in the stand-off distance (contact tip to work distance) while maintaining an ...

2013-09-30T23:59:59.000Z

285

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Fluid Flow through Heterogeneous Methane-Hydrate Bearing Sand Fluid Flow through Heterogeneous Methane-Hydrate Bearing Sand Fluid Flow through Heterogeneous Methane-Hydrate Bearing Sand: Observations Using X-Ray CT Scanning Authors: Yongkoo Seol and Timothy J. Kneafsey Venue: 6th International Conference on Gas Hydrates (ICGH 2008), Vancouver, British Columbia, CANADA, July 6-10, 2008. http://www.icgh.org/ [external site] Abstract: The effects of porous medium heterogeneity on methane hydrate formation, water flow through the heterogeneous hydrate-bearing sand, and hydrate dissociation were observed in an experiment using a heterogeneous sand column with prescribed heterogeneities. X-ray computed tomography (CT) was used to monitor saturation changes in water, gas, and hydrate during hydrate formation, water flow, and hydrate dissociation. The sand column was packed in several segments having vertical and horizontal layers with two distinct grain-size sands. The CT images showed that as hydrate formed, the water and hydrate saturations were dynamically redistributed by variations in capillary strength of the medium (the tendency for a material to imbibe water), which changed with the presence and saturation of hydrate. Water preferentially flowed through fine sand near higher hydrate-saturation regions where the capillary strength was elevated relative to the lower hydrate saturation regions. Hydrate dissociation initiated by depressurization varied with different grain sizes and hydrate saturations.

286

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Saline Water Disposal in the Uinta Basin, Utah Saline Water Disposal in the Uinta Basin, Utah Saline Water Disposal in the Uinta Basin, Utah Authors: Michael D. Vanden Berg, Stephanie Carney, Michael D. Laine, Craig D. Morgan, Utah Geological Survey; and Paul B. Anderson, consulting geologist. Venue: Poster Session: Responsible Development, Sustainability, and Climate Science—Groundwater and Site Remediation, June 9, 2009, American Association of Petroleum Geologists annual meeting, Denver, CO, June 7 to 10, 2009. http://www.aapg.org/denver/ [external site] Abstract: Saline water disposal is the single most pressing issue with regard to increasing petroleum and natural gas production in the Uinta Basin of Utah. Conventional oil and gas fields in the basin provide 67% of Utah’s total crude oil production and 71% of Utah’s total natural gas, the latter of which has increased 175% in the last 10 years. As petroleum production increases, so does saline water production, creating an increased need for economic and environmentally responsible disposal plans. Current water disposal wells are near capacity, and permitting for new wells is being delayed because of a lack of technical data regarding potential disposal aquifers and questions concerning contamination of fresh water sources. Many Uinta Basin operators claim that petroleum and natural gas production cannot reach its full potential until a suitable, long-term saline water disposal solution is determined. Researchers have begun efforts to re-map the base of the moderately saline aquifer within the Uinta Basin using more robust data and more sophisticated GIS techniques than previous efforts. Below this base, they believe that saline water can be injected without damage to the overlying freshwater reservoirs. Water chemistry data are being collected from wells of operators and governmental agencies. These ground-truth data are supplemented with water chemistry information calculated from geophysical logs. In addition to the new GIS-based map, the researchers are constructing cross sections showing the stratigraphic position of the moderately saline to very saline transition and its relationship to potential seals and disposal zones in the Uinta Basin. A potentially suitable disposal zone for large volume saline water disposal is the fresh to slightly saline Bird’s-Nest aquifer. This aquifer is located in the oil shale zone of the Green River formation’s Parachute Creek member and is 200 to 300 ft above the kerogen-rich Mahogany zone. A significant concern is that saline water disposal into the Bird’s-Nest by conventional gas producers may hinder oil shale development by creating unforeseen economic and technical hurdles. With increased saline water disposal, the water quality in the Bird’s-Nest could degrade and create additional water disposal problems for oil shale development companies. Researchers have examined this aquifer in outcrop, core, and geophysical logs and have gained a better understanding of its areal extent, thickness, and zones of differing water chemistry

287

NETL: News Release - DOE Seeks "Small-Footprint" Oil and Gas Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

June 16, 2004 June 16, 2004 DOE Seeks "Small-Footprint" Oil and Gas Technologies Two-Inch "Microholes" Could Lessen Environmental Impacts, Costs The Department of Energy (DOE) today announced a major new research and development initiative to develop "microhole" technologies - those that use portable drilling rigs with a smaller footprint and lower environmental impact. The program is designed to bring about faster, cheaper and safer oil and gas projects. "This is a major new research and development initiative that is aimed at reducing the environmental footprint of oil and gas operations at the same time it reduces costs and increases America's oil and gas production," Secretary of Energy Spencer Abraham said. "It's clear this initiative will help meet President Bush's goals for energy and the environment."

288

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on Gas  

NLE Websites -- All DOE Office Websites (Extended Search)

Gas and Oil in Utah: Potential, New Discoveries, and Hot Plays Gas and Oil in Utah: Potential, New Discoveries, and Hot Plays Gas and Oil in Utah: Potential, New Discoveries, and Hot Plays Author: Thomas C. Chidsey, Petroleum Section Chief, Utah Geological Survey, Salt Lake City, UT. Venue: International Oil Scouts Association’s 84th annual meeting, Stein Eriksen Lodge, Park City, UT, June 17–20, 2007, (http://www.oilscouts.com/index-main.html [external site]). Abstract: Utah’s natural gas and oil exploration history extends back more than 100 years, fluctuating greatly due to discoveries, price trends, and changing exploration targets. During the boom period of the early 1980s, activity peaked at over 500 wells per year. After slowing in the 1990s, drilling activity has again increased, reaching an all-time peak of 1,058 wells spudded and over 2,000 APDs (application for permit to drill) filed in 2006. This increase in activity has been spurred by high prices for both natural gas and oil and by the perception that Utah is highly prospective and underexplored. In recent years, the proportion of new wells exploring for gas has increased greatly. Total cumulative natural gas production from Utah fields now exceeds 8 Tcf. Recent successful drilling has been expanding reserves by about 10 percent per year, one of the highest rates of gas reserves increase in the country. Although gas production from some fields declined during the late 1990s, two factors caused overall gas production to increase. The development of coalbed natural gas (CBNG) accumulations in the Cretaceous Ferron Sandstone play, in particular Drunkards Wash field in central Utah, has increased the State’s annual gas production by 20–30 percent. Also, deeper exploratory and development drilling in the eastern and southern Uinta Basin during the past 5 years has led to discoveries of substantial gas accumulations in tight-sand reservoirs of the Tertiary Wasatch Formation, Cretaceous Mesaverde Group, and Jurassic Entrada and Wingate Sandstones. Significant potential exists for other coalfields (Book Cliffs, Sego, and Wasatch Plateau) around the Uinta Basin to yield CBNG, and the extent of deeper conventional and tight-gas plays remains to be explored. In addition, shale gas reservoirs in the Mississippian Manning Canyon Shale, Pennsylvanian Hermosa Group, and Cretaceous Mancos Shale of central, southeastern, and northeastern Utah, respectively, have tremendous untapped potential. Utah oilfields have produced a cumulative total of 1.3 billion barrels (bbl) of oil. Although annual production decreased from a peak of 41 million bbl in 1985 to 13 million bbl in 2003, the trend has since reversed, and 2005 production reached nearly 17 million bbl. A component (about one-third of the increase) of this turnaround has been the 2004 discovery of Covenant field in the central Utah thrust belt, or "Hingeline." This new field has already produced 3 million bbl of Mississippian-sourced oil from the Jurassic Navajo Sandstone in a thrusted anticline formed during the Sevier orogeny. This new oil play is the focus of extensive leasing and exploration activity—comparable to the late 1970s and early 1980s in the Utah-Wyoming salient of the thrust belt to the north.

289

TECHNOLOGIES TO ENHANCE OPERATION OF THE EXISTNG NATURAL GAS COMPRESSION INFRASTRUCTURE  

Science Conference Proceedings (OSTI)

This report documents work performed in the third quarter of the project entitled: ''Technologies to Enhance Operation of the Existing Natural Gas Compression Infrastructure''. The project objective is to develop and substantiate methods for operating integral engine/compressors in gas pipeline service, which reduce fuel consumption, increase capacity, and enhance mechanical integrity. The report describes the following work: first field test; test data analysis.

Anthony J. Smalle; Ralph E. Harris; Gary D. Bourn

2003-07-01T23:59:59.000Z

290

TECHNOLOGIES TO ENHANCE OPERATION OF THE EXISTING NATURAL GAS COMPRESSION INFRASTRUCTURE  

Science Conference Proceedings (OSTI)

This report documents work performed in the fourth quarter of the project entitled: ''Technologies to Enhance Operation of the Existing Natural Gas Compression Infrastructure''. The project objective is to develop and substantiate methods for operating integral engine/compressors in gas pipeline service, which reduce fuel consumption, increase capacity, and enhance mechanical integrity. The report describes the following work: second field test; test data analysis for the first field test; operational optimization plans.

Anthony J. Smalley; Ralph E. Harris; Gary D. Bourn

2003-10-01T23:59:59.000Z

291

TECHNOLOGIES TO ENHANCE OPERATION OF THE EXISTING NATURAL GAS COMPRESSION INFRASTRUCTURE  

Science Conference Proceedings (OSTI)

This report documents work performed in the fifth quarter of the project entitled: ''Technologies to Enhance Operation of the Existing Natural Gas Compression Infrastructure''. The project objective is to develop and substantiate methods for operating integral engine/compressors in gas pipeline service, which reduce fuel consumption, increase capacity, and enhance mechanical integrity. The report describes the following work: completion of analysis of data from first visit to second site; preparation for follow-up testing.

Anthony J. Smalley; Ralph E. Harris; Gary D. Bourn

2004-01-01T23:59:59.000Z

292

[Gas cooled fuel cell systems technology development program  

DOE Green Energy (OSTI)

Objective is the development of a gas-cooled phosphoric acid fuel cell for electric utility power plant application. Primary objectives are to: demonstrate performance endurance in 10-cell stacks at 70 psia, 190 C, and 267 mA/cm[sup 2]; improve cell degradation rate to less than 8 mV/1000 hours; develop cost effective criteria, processes, and design configurations for stack components; design multiple stack unit and a single 100 kW fuel cell stack; design a 375 kW fuel cell module and demonstrate average cell beginning-of-use performance; manufacture four 375-kW fuel cell modules and establish characteristics of 1.5 MW pilot power plant. The work is broken into program management, systems engineering, fuel cell development and test, facilities development.

Not Available

1988-03-01T23:59:59.000Z

293

New techniques and products solve industry problems. [New technology available for the natural gas pipeline industry  

SciTech Connect

Recently introduced technology advances in data handling, manipulation and delivery; new gas and storage marketing products; a nonintrusive pipe-crack arrester; and responsive pipe-coating mill construction show promise for cutting industry costs by increasing efficiency in pipe line construction, repair, rehabilitation, and operations. The products, services and methods described in this new technology survey include: a PC-compatible dataserver that requires no user programming; flexible, responsive gas transportation scheme; evaluation of possible further uses on brittle transmission lines for fiberglass-reinforced resin composite; new multilayer epoxy PE coating mill in Corinth, Greece, near areas where large pipe line construction and rehabilitation projects are contemplated.

Bullion, L.

1993-09-01T23:59:59.000Z

294

TECHNOLOGY TRANSFER TO U.S. INDEPENDENT OIL AND NATURAL GAS PRODUCERS  

SciTech Connect

The Petroleum Technology Transfer Council (PTTC) continued pursuing its mission of helping U.S. independent oil and natural gas producers make timely, informed technology decisions. Networking opportunities that occur with a Houston Headquarters (HQ) location are increasing name awareness. Focused efforts by Executive Director Don Duttlinger to interact with large independents, national service companies and some majors are continuing to supplement the support base of the medium to smaller industry participants around the country. PTTC is now involved in many of the technology-related activities that occur in high oil and natural gas activity areas. Access to technology remains the driving force for those who do not have in-house research and development capabilities and look to the PTTC to provide services and options for increased efficiency.

Unknown

2003-04-30T23:59:59.000Z

295

NEW AND NOVEL FRACTURE STIMULATION TECHNOLOGIES FOR THE REVITALIZATION OF EXISTING GAS STORAGE WELLS  

SciTech Connect

Gas storage wells are prone to continued deliverability loss at a reported average rate of 5% per annum (in the U.S.). This is a result of formation damage due to the introduction of foreign materials during gas injection, scale deposition and/or fines mobilization during gas withdrawal, and even the formation and growth of bacteria. As a means to bypass this damage and sustain/enhance well deliverability, several new and novel fracture stimulation technologies were tested in gas storage fields across the U.S. as part of a joint U.S. Department of Energy and Gas Research Institute R&D program. These new technologies include tip-screenout fracturing, hydraulic fracturing with liquid CO{sub 2} and proppant, extreme overbalance fracturing, and high-energy gas fracturing. Each of these technologies in some way address concerns with fracturing on the part of gas storage operators, such as fracture height growth, high permeability formations, and fluid sensitivity. Given the historical operator concerns over hydraulic fracturing in gas storage wells, plus the many other unique characteristics and resulting stimulation requirements of gas storage reservoirs (which are described later), the specific objective of this project was to identify new and novel fracture stimulation technologies that directly address these concerns and requirements, and to demonstrate/test their potential application in gas storage wells in various reservoir settings across the country. To compare these new methods to current industry deliverability enhancement norms in a consistent manner, their application was evaluated on a cost per unit of added deliverability basis, using typical non-fracturing well remediation methods as the benchmark and considering both short-term and long-term deliverability enhancement results. Based on the success (or lack thereof) of the various fracture stimulation technologies investigated, guidelines for their application, design and implementation have been developed. A final research objective was to effectively deploy the knowledge and experience gained from the project to the gas storage industry at-large.

Unknown

1999-12-01T23:59:59.000Z

296

Oil and gas technology transfer activities and potential in eight major producing states. Volume 1  

Science Conference Proceedings (OSTI)

In 1990, the Interstate Oil and Gas Compact Commission (the Compact) performed a study that identified the structure and deficiencies of the system by which oil and gas producers receive information about the potential of new technologies and communicate their problems and technology needs back to the research community. The conclusions of that work were that major integrated companies have significantly more and better sources of technology information than independent producers. The majors also have significantly better mechanisms for communicating problems to the research and development (R&D) community. As a consequence, the Compact recommended analyzing potential mechanisms to improve technology transfer channels for independents and to accelerate independents acceptance and use of existing and emerging technologies. Building on this work, the Compact, with a grant from the US Department Energy, has reviewed specific technology transfer organizations in each of eight major oil producing states to identify specific R&D and technology transfer organizations, characterize their existing activities, and identify potential future activities that could be performed to enhance technology transfer to oil and gas producers. The profiles were developed based on information received from organizations,follow-up interviews, site visit and conversations, and participation in their sponsored technology transfer activities. The results of this effort are reported in this volume. In addition, the Compact has also developed a framework for the development of evaluation methodologies to determine the effectiveness of technology transfer programs in performing their intended functions and in achieving desired impacts impacts in the producing community. The results of that work are provided in a separate volume.

Not Available

1993-07-01T23:59:59.000Z

297

Proceedings of the 1999 Oil and Gas Conference: Technology Options for Producer Survival  

Science Conference Proceedings (OSTI)

The 1999 Oil & Gas Conference was cosponsored by the U.S. Department of Energy (DOE), Office of Fossil Energy, Federal Energy Technology Center (FETC) and National Petroleum Technology Office (NPTO) on June 28 to 30 in Dallas, Texas. The Oil & Gas Conference theme, Technology Options for Producer Survival, reflects the need for development and implementation of new technologies to ensure an affordable, reliable energy future. The conference was attended by nearly 250 representatives from industry, academia, national laboratories, DOE, and other Government agencies. Three preconference workshops (Downhole Separation Technologies: Is it Applicable for Your Operations, Exploring and developing Naturally Fractured Low-Permeability Gas Reservoirs from the Rocky Mountains to the Austin Chalk, and Software Program Applications) were held. The conference agenda included an opening plenary session, three platform sessions (Sessions 2 and 3 were split into 2 concurrent topics), and a poster presentation reception. The platform session topics were Converting Your Resources Into Reserves (Sessions 1 and 2A), Clarifying Your Subsurface Vision (Session 2B), and High Performance, Cost Effective Drilling, Completion, Stimulation Technologies (Session 3B). In total, there were 5 opening speakers, 30 presenters, and 16 poster presentations.

None available

2000-04-12T23:59:59.000Z

298

A fuel cycle framework for evaluating greenhouse gas emission reduction technology  

SciTech Connect

Energy-related greenhouse gas (GHG) emissions arise from a number of fossil fuels, processes and equipment types throughout the full cycle from primary fuel production to end-use. Many technology alternatives are available for reducing emissions based on efficiency improvements, fuel switching to low-emission fuels, GHG removal, and changes in end-use demand. To conduct systematic analysis of how new technologies can be used to alter current emission levels, a conceptual framework helps develop a comprehensive picture of both the primary and secondary impacts of a new technology. This paper describes a broad generic fuel cycle framework which is useful for this purpose. The framework is used for cataloging emission source technologies and for evaluating technology solutions to reduce GHG emissions. It is important to evaluate fuel mix tradeoffs when investigating various technology strategies for emission reductions. For instance, while substituting natural gas for coal or oil in end-use applications to reduce CO{sub 2} emissions, natural gas emissions of methane in the production phase of the fuel cycle may increase. Example uses of the framework are given.

Ashton, W.B.; Barns, D.W. (Pacific Northwest Lab., Richland, WA (USA)); Bradley, R.A. (USDOE Office of Policy, Planning and Analysis, Washington, DC (USA). Office of Environmental Analysis)

1990-05-01T23:59:59.000Z

299

The Digital Revolution in Measurements  

Science Conference Proceedings (OSTI)

This paper considers what it means to make a measurement, and the changes in measurement technology over the years. The impact of the latest changes, which have resulted in most electrical measurements being done digitally, is explored. It is argued that the process of measurement can be considered equivalent to one of data compression. The smart grid will certainly result in many more signals being made available, and therefore a great deal of data compression will be taking place. Measurements will be made in parts of the power system presently unmonitored, as well as parts that are already well covered by instrumentation. The smart grid engineer must decide what it means to have useful information. Unless care is taken, the signal processing may furnish information that is not useful, and may not even make sense. The paper concludes by examining the possibilities of data compression from multiple separate signals.

Kirkham, Harold

2013-02-27T23:59:59.000Z

300

NETL: Oil & Natural Gas Technologies Reference Shelf - Coalbed Methane  

NLE Websites -- All DOE Office Websites (Extended Search)

Coalbed Methane Production and Reclamation Field Tour Coalbed Methane Production and Reclamation Field Tour Coalbed Methane Production and Reclamation Field Tour Author: John Wheaton, Montana Tech of the University of Montana, Butte, MT. Venue: The tour will be conducted starting in Gillette, WY, and extend along the northern Powder River Basin, on June 3, 2007, under the auspices of the American Society for Mining and Reclamation (http://ces.ca.uky.edu/asmr/ [external site]). Abstract: This field tour will emphasize successful reclamation in an alternative type of coal industry in the Powder River Basin: coalbed methane. The tour will leave Gillette, WY, at 7:30 a.m., Sunday, June 3, 2007, and travel to Sheridan, WY, and back, touring coalbed methane production areas. Stops will include active drilling and producing areas to learn about the footprint and approach to development of coalbed methane. Reclamation includes drilling pads and linear trenching for water and gas pipelines. Produced-water management is a major expense and concern. Among the water management options we plan to see are stock-watering facilities, infiltration ponds, irrigation sites, and water treatment facilities. A landowner will join us and be able to answer questions from the ranching perspective for part of the tour. Lunches are included in the price of the tour.

Note: This page contains sample records for the topic "gas revolution technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Enabling Technology for Monitoring & Predicting Gas Turbine Health & Performance in COAL IGCC Powerplants  

SciTech Connect

The ''Enabling & Information Technology To Increase RAM for Advanced Powerplants'' program, by DOE request, has been re-directed, de-scoped to two tasks, shortened to a 2-year period of performance, and refocused to develop, validate and accelerate the commercial use of enabling materials technologies and sensors for Coal IGCC powerplants. The new program has been re-titled as ''Enabling Technology for Monitoring & Predicting Gas Turbine Health & Performance in IGCC Powerplants'' to better match the new scope. This technical progress report summarizes the work accomplished in the reporting period April 1, 2004 to August 31, 2004 on the revised Re-Directed and De-Scoped program activity. The program Tasks are: Task 1--IGCC Environmental Impact on high Temperature Materials: This first materials task has been refocused to address Coal IGCC environmental impacts on high temperature materials use in gas turbines and remains in the program. This task will screen material performance and quantify the effects of high temperature erosion and corrosion of hot gas path materials in Coal IGCC applications. The materials of interest will include those in current service as well as advanced, high-performance alloys and coatings. Task 2--Material In-Service Health Monitoring: This second task develops and demonstrates new sensor technologies to determine the in-service health of advanced technology Coal IGCC powerplants, and remains in the program with a reduced scope. Its focus is now on only two critical sensor need areas for advanced Coal IGCC gas turbines: (1) Fuel Quality Sensor for detection of fuel impurities that could lead to rapid component degradation, and a Fuel Heating Value Sensor to rapidly determine the fuel heating value for more precise control of the gas turbine, and (2) Infra-Red Pyrometer to continuously measure the temperature of gas turbine buckets, nozzles, and combustor hardware.

Kenneth A. Yackly

2004-09-30T23:59:59.000Z

302

Enabling Technology for Monitoring & Predicting Gas Turbine Health & Performance in IGCC Powerplants  

SciTech Connect

The ''Enabling & Information Technology To Increase RAM for Advanced Powerplants'' program, by DOE request, was re-directed, de-scoped to two tasks, shortened to a 2-year period of performance, and refocused to develop, validate and accelerate the commercial use of enabling materials technologies and sensors for coal/IGCC powerplants. The new program was re-titled ''Enabling Technology for Monitoring & Predicting Gas Turbine Health & Performance in IGCC Powerplants''. This final report summarizes the work accomplished from March 1, 2003 to March 31, 2004 on the four original tasks, and the work accomplished from April 1, 2004 to July 30, 2005 on the two re-directed tasks. The program Tasks are summarized below: Task 1--IGCC Environmental Impact on high Temperature Materials: The first task was refocused to address IGCC environmental impacts on high temperature materials used in gas turbines. This task screened material performance and quantified the effects of high temperature erosion and corrosion of hot gas path materials in coal/IGCC applications. The materials of interest included those in current service as well as advanced, high-performance alloys and coatings. Task 2--Material In-Service Health Monitoring: The second task was reduced in scope to demonstrate new technologies to determine the inservice health of advanced technology coal/IGCC powerplants. The task focused on two critical sensing needs for advanced coal/IGCC gas turbines: (1) Fuel Quality Sensor to rapidly determine the fuel heating value for more precise control of the gas turbine, and detection of fuel impurities that could lead to rapid component degradation. (2) Infra-Red Pyrometer to continuously measure the temperature of gas turbine buckets, nozzles, and combustor hardware. Task 3--Advanced Methods for Combustion Monitoring and Control: The third task was originally to develop and validate advanced monitoring and control methods for coal/IGCC gas turbine combustion systems. This task was refocused to address pre-mixed combustion phenomenon for IGCC applications. The work effort on this task was shifted to another joint GE Energy/DOE-NETL program investigation, High Hydrogen Pre-mixer Designs, as of April 1, 2004. Task 4--Information Technology (IT) Integration: The fourth task was originally to demonstrate Information Technology (IT) tools for advanced technology coal/IGCC powerplant condition assessment and condition based maintenance. The task focused on development of GateCycle. software to model complete-plant IGCC systems, and the Universal On-Site Monitor (UOSM) to collect and integrate data from multiple condition monitoring applications at a power plant. The work on this task was stopped as of April 1, 2004.

Kenneth A. Yackly

2005-12-01T23:59:59.000Z

303

Enabling Technology for Monitoring & Predicting Gas Turbine Health & Performance in IGCC Powerplants  

DOE Green Energy (OSTI)

The ''Enabling & Information Technology To Increase RAM for Advanced Powerplants'' program, by DOE request, was re-directed, de-scoped to two tasks, shortened to a 2-year period of performance, and refocused to develop, validate and accelerate the commercial use of enabling materials technologies and sensors for coal/IGCC powerplants. The new program was re-titled ''Enabling Technology for Monitoring & Predicting Gas Turbine Health & Performance in IGCC Powerplants''. This final report summarizes the work accomplished from March 1, 2003 to March 31, 2004 on the four original tasks, and the work accomplished from April 1, 2004 to July 30, 2005 on the two re-directed tasks. The program Tasks are summarized below: Task 1--IGCC Environmental Impact on high Temperature Materials: The first task was refocused to address IGCC environmental impacts on high temperature materials used in gas turbines. This task screened material performance and quantified the effects of high temperature erosion and corrosion of hot gas path materials in coal/IGCC applications. The materials of interest included those in current service as well as advanced, high-performance alloys and coatings. Task 2--Material In-Service Health Monitoring: The second task was reduced in scope to demonstrate new technologies to determine the inservice health of advanced technology coal/IGCC powerplants. The task focused on two critical sensing needs for advanced coal/IGCC gas turbines: (1) Fuel Quality Sensor to rapidly determine the fuel heating value for more precise control of the gas turbine, and detection of fuel impurities that could lead to rapid component degradation. (2) Infra-Red Pyrometer to continuously measure the temperature of gas turbine buckets, nozzles, and combustor hardware. Task 3--Advanced Methods for Combustion Monitoring and Control: The third task was originally to develop and validate advanced monitoring and control methods for coal/IGCC gas turbine combustion systems. This task was refocused to address pre-mixed combustion phenomenon for IGCC applications. The work effort on this task was shifted to another joint GE Energy/DOE-NETL program investigation, High Hydrogen Pre-mixer Designs, as of April 1, 2004. Task 4--Information Technology (IT) Integration: The fourth task was originally to demonstrate Information Technology (IT) tools for advanced technology coal/IGCC powerplant condition assessment and condition based maintenance. The task focused on development of GateCycle. software to model complete-plant IGCC systems, and the Universal On-Site Monitor (UOSM) to collect and integrate data from multiple condition monitoring applications at a power plant. The work on this task was stopped as of April 1, 2004.

Kenneth A. Yackly

2005-12-01T23:59:59.000Z

304

The Keynesian Revolution: A Research School Analysis  

E-Print Network (OSTI)

and 1932 (Badger 1989: 18, 20-22). The situation in Europe was just as bad: in Britain, national income contracted by 3% a year between 1929 and 1931 (M. Thomas 1994: 343). On the Continent there were bank collapses in a number of countries... . In discussing the marginalist revolution of the 1870s, Mirowski (1984: 364) notes the unity of technique [between] physics and economics?, but also argues that economics suffers from physics envy? (see Mirowski 1989...

Cord, Robert Anthony

2009-01-01T23:59:59.000Z

305

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Super-Cement for Annular Seal & Long-Term Integrity in Deep, Hot Wells Super-Cement for Annular Seal & Long-Term Integrity in Deep, Hot Wells Super-Cement for Annular Seal & Long-Term Integrity in Deep, Hot Wells Authors: Fred Sabins, Kevin Edgely, and Larry Watters, CSI Technologies, LLC, Houston, TX. Venue: 2007 Drilling Engineering Association Workshop, Moody Gardens Hotel, Galveston, TX, June 19-20, 2007 (http://www.dea-global.org) [external site]). Abstract: Successful laboratory and field testing of Ultra-Seal® R and Pre-Stressed Cement will be presented. The application of these materials can dramatically reduce the costs of re-establishing annular seal integrity in deep, hot wells, thereby significantly lowering life-cycle well costs. CSI Technologies chose two cement types for further field testing in the third phase of the project to develop a “supercement” for work in high-temperature/high-pressure (HT/HP) wells. HT/HP wells often encounter problems with isolation of production zones due to cement failures. This can result in expensive repair jobs and costly shut-ins of high-volume wells. CSI determined that resin and magnesium oxide cements showed very good mechanical properties and bonding characteristics and are controllable at HT/HP conditions. The resin cement has been used successfully in more than 50 field plugging jobs and in one HT/HP squeeze job. CSI developed a second supercement formulation that is Portland cement- based and functions by generating substantial expansion during the curing process. This material functions in the confined wellbore environment by developing significant cement matrix compressive stress during cure, resulting in a compressive pre-load. In practice, the compressive pre-load functions to elevate the effective tensile strength of the material because the compressive stress must be relieved before the material can experience tensile stress. Additionally, the pre-load functions to keep the material tightly bound to the wellbore tubulars, thereby reducing the tendency of repeated stress cycles to form a microannulus.

306

Economic benefits of R and D on gas supply technologies. [Unconventioal natural gas resources which are tight sands, Devonian shale, coal seam gas, and gas co-produced with water  

SciTech Connect

Advanced natural gas supply technologies, if successful, could lower the average cost of gas to consumers by 18% and increase the expected gas demand by 2 quads/year by the year 2000. Advanced production techniques for unconventional gas will have by far the greatest impact on future gas prices, providing economic benefits of between $200 billion and $320 billion. Advanced SNG from coal will provide only a $9 billion benefit if unconventional gas meets all of its performance targets. However, higher demand and failure of unconventional gas R and D could raise the benefits of SNG research to $107 billion. SNG research provides a hedge value that increases the likelihood of receiving a positive payoff from gas supply R and D. Changing the performance goals for SNG research to emphasize cost reduction rather than acceleration of the date of commercialization would greatly increase the potential benefits of the program. 9 references, 8 figures, 5 tables.

Darrow, K.G.; Ashby, A.B.; Nesbitt, D.M.; Marshalla, R.A.

1985-01-01T23:59:59.000Z

307

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Drilling Tests of an Active Vibration Damper Drilling Tests of an Active Vibration Damper Drilling Tests of an Active Vibration Damper Authors: Mark Wassell, Martin Cobern, Carl Perry, Jason Barbely, and Daniel Burgess, APS Technology, Inc. Venue: Drilling Engineering Association’s 2007 DEA Workshop in Galveston, TX, June 19-20, 2007 Abstract: Testing of an active drilling vibration damper (AVD) system at TerraTek Laboratory, under conditions designed to induce vibration, demonstrated that the use of the AVD reduced vibration, maintained more consistent weight-on-bit, and increased rate of penetration (ROP). These tests demonstrated that the AVD is likely to provide significant time and cost savings, particularly in deep wells. The results of these tests will be outlined. Related NETL Project: The goal of the related NETL project DE-FC26-02NT41664, “Drilling Vibration Monitoring and Control System,” is to improve ROP and reduce the incidence of premature equipment failures in deep hard rock drilling environments by reducing harmful drillstring vibration.

308

Assessment of basic research needs for greenhouse gas control technologies  

SciTech Connect

This paper is an outgrowth of an effort undertaken by the Department of Energy's Office of Energy Research to assess the fundamental research needs to support a national program in carbon management. Five topics were identified as areas where carbon management strategies and technologies might be developed: (1) capture of carbon dioxide, decarbonization strategies, and carbon dioxide disposal and utilization; (2) hydrogen development and fuel cells; (3) enhancement of the natural carbon cycle; (4) biomass production and utilization; and (5) improvement of the efficiency of energy production, conversion, and utilization. Within each of these general areas, experts came together to identify targets of opportunity for fundamental research likely to lead to the development of mid- to long-term solutions for stabilizing or decreasing carbon dioxide and other greenhouse gases in the atmosphere. Basic research to support the options outlined above are far reaching-from understanding natural global processes such as the ocean and terrestrial carbon cycles to development of new materials and concepts for chemical separation. Examples of fundamental research needs are described in this paper.

Benson, S.M.; Chandler, W.; Edmonds, J.; Houghton, J.; Levine, M.; Bates, L.; Chum, H.; Dooley, J.; Grether, D.; Logan, J.; Wiltsee, G.; Wright, L.

1998-09-01T23:59:59.000Z

309

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Updated Results from Deep Trek High-Temperature Electronics Development Programs Updated Results from Deep Trek High-Temperature Electronics Development Programs Updated Results from Deep Trek High-Temperature Electronics Development Programs Author: Bruce W. Ohme, Honeywell Inc., Plymouth, MN. Venue: HITEN 2007 (High-Temperature Electronics Network conference), St. Catherine’s College, Oxford, U.K., September 17–19, 2007, (http://science24.com/event/hiten2007 [external site]). Abstract: Electronics are used in modern oil and gas exploration to collect, log, and/or process data such as heading and inclination, weight on the bit, vibration, seismic/acoustic response, temperature, pressure, radiation, and resistivity of the strata. High-temperature electronics are needed that can operate reliably in deep-well conditions (up to 250oC). Under its Deep Trek program, the U.S. Department of Energy has funded two projects led by Honeywell. The first project, launched in 2003 and being completed this year, established a production-level integrated circuit manufacturing process, components, and design tools specifically targeting high-temperature environments (up to 250oC). The second project, launched in 2006 and expected to be completed in 2008, will develop rugged packaging suitable for downhole shock and vibration levels that will be used to house and demonstrate components developed in the earlier project. This paper will describe updated results from both of these projects, including previously unreported results obtained from prototype testing of a high-resolution analog-to-digital converter (ADC); a high-temperature, single-poly, floating-gate EEPROM (electrically erasable programmable read-only memory); and a 12-bit, successive-approximation ADC. Also, a multi-chip module being developed as a complete downhole processing unit will be discussed

310

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Estimating Fracture Reorientation Due to Fluid Injection/Production Estimating Fracture Reorientation Due to Fluid Injection/Production Estimating Fracture Reorientation Due to Fluid Injection/Production Authors: Zongyu Zhai and Mukul M. Sharma, University of Texas at Austin. Venue: Society of Petroleum Engineers’ Production and Operations Symposium, Oklahoma City, OK, April 1–3, 2007 (http://www.spe.org/ [external site]). Abstract: The injection or production of large volumes of fluid into or from a reservoir can result in significant changes to the effective in-situ stress distributions. Field evidence of this has been provided in the past by mapping refracturing treatments in tight gas sands and microseismic monitoring of injection wells in waterflooded reservoirs. A poro-elastic model is presented to show how the extent of fracture reorientation can be estimated under different conditions of fluid injection and production. The extent of fracture reorientation is a function of the in-situ stresses, the mechanical properties of the rock, and the pore pressure gradients. In reservoirs where the pore pressure gradients are complicated due to multiple injection and production wells, fracture reorientation is sensitive to the net pore-pressure gradients. Fractures tend to reorient themselves towards the injection wells and away from production wells, if the pressure gradients are comparable to the in-situ stress contrast. While far-field principal stress orientations are impacted only by in-situ stresses and pore-pressure gradients, near-wellbore in-situ stress orientation is also impacted by the hoop stress and the wellbore pressure. These can have a significant effect on near-wellbore fracture reorientation. The results of our model are compared with field observations obtained from microseismic monitoring of water injection wells. The implications of the results to refracturing operations and candidate well selection are discussed.

311

NETL: News Release - 3-D Seismic Technology Locates Natural Gas in  

NLE Websites -- All DOE Office Websites (Extended Search)

January 10, 2005 January 10, 2005 3-D Seismic Technology Locates Natural Gas in Fractured Reservoirs DOE-Sponsored Project Taps New Supplies of "Tight" Gas RIO ARRIBA COUNTY, N.M. - Large volumes of natural gas are being tapped from the tight rocks of the San Juan Basin in New Mexico's Rio Arriba County using a new technology developed in a project sponsored by the U.S. Department of Energy (DOE). In this cost-shared project, GeoSpectrum, Inc., of Midland, Texas, uses 3-D seismic to locate fractures in the earth that provide access to millions of cubic feet of untapped natural gas in four new wells-including one well that is now producing up to 2 million cubic feet per day. "The key innovation in this project is the integration of technologies that map previously unseen fracture lineaments and perturbations in seismic data, and then target fracture "sweet spots" where multiple fractures intersect," said geophysicist Francis Toro, who manages the project for DOE's National Energy Technology Laboratory.

312

Development and Application of Gas Sensing Technologies to Enable Boiler Balancing  

E-Print Network (OSTI)

01/2004 Development and Application of Gas Sensing Technologies to Enable Boiler Balancing to monitor total NOx (0-1000 ppm), CO (0-1000 ppm) and O2 (1-15%) within the convective pass of the boiler of such sensor systems will dramatically alter how boilers are operated, since much of the emissions creation

Dutta, Prabir K.

313

Oil & Natural Gas Technology DOE Award No.: DE-FC26-04NT15510  

E-Print Network (OSTI)

i Oil & Natural Gas Technology DOE Award No.: DE-FC26-04NT15510 Final Report A Systems Approach has compiled and presented a broad base of information and knowledge needed by independent oil and exploration in the New Albany Shale Group, a Devonian black shale source rock, in Illinois was completed due

314

NATURAL GAS REBURNING TECHNOLOGY FOR NOx REDUCTION FROM MSW COMBUSTION SYSTEMS  

E-Print Network (OSTI)

NATURAL GAS REBURNING TECHNOLOGY FOR NOx REDUCTION FROM MSW COMBUSTION SYSTEMS Discussion by CRAIG's increased turbulent mixing is on the CO profile and what the incremental NOx reduction experienced was from that this alone would contribute to a significant reduction in the NO", generated. The authors are careful

Columbia University

315

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Novel Applications for Biogeophysics: Prospects for Detecting Key Subseafloor Geomicrobiological Processes or Habitats Novel Applications for Biogeophysics: Prospects for Detecting Key Subseafloor Geomicrobiological Processes or Habitats Novel Applications for Biogeophysics: Prospects for Detecting Key Subseafloor Geomicrobiological Processes or Habitats Authors: Rick Colwell, Oregon State University, and Dimitris Ntarlagiannis, Rutgers University. Venue: American Geophysical Union’s 2007 Joint Assembly, Acapulco Mexico, May 21-25, 2007 (http://www.agu.org/ [external site]). Abstract: The new subdiscipline of biogeophysics has focused mostly on the geophysical signatures of microbial processes in contaminated subsurface environments usually undergoing remediation. However, the use of biogeophysics to examine the biogeochemistry of marine sediments has not yet been well integrated into conceptual models that describe subseafloor processes. Current examples of geophysical measurements that have been used to detect geomicrobiological processes or infer their location in the seafloor include sound surveillance system (SOSUS)-derived data that detect seafloor eruptive events, deep and shallow cross-sectional seismic surveys that determine the presence of hydraulically conductive zones or gas-bearing sediments (e.g., bottom-simulating reflectors or bubble-rich strata), and thermal profiles. One possible area for innovative biogeophysical characterization of the seafloor involves determining the depth of the sulfate-methane interface (SMI) in locations where sulfate diffuses from the seawater and methane emanates from subsurface strata. The SMI demarcates a stratum where microbially driven anaerobic methane oxidation (AMO) is dependent upon methane as an electron donor and sulfate as an electron acceptor. AMO is carried out by a recently defined, unique consortium of microbes that metabolically temper the flux of methane into the overlying seawater. The depth of the SMI is, respectively, shallow or deep according to whether a high or low rate of methane flux occurs from the deep sediments. Presently, the SMI can only be determined by direct measurements of methane and sulfate concentrations in the interstitial waters or by molecular biological techniques that target the microbes responsible for creating the SMI. Both methods require collection and considerable analysis of sediment samples. Therefore, detection of the SMI by non-destructive methods would be advantageous. As a key biogeochemical threshold in marine sediments, the depth of the SMI defines methane charge in marine sediments, whether it is from dissolved methane or from methane hydrates. As such, a biogeophysical strategy for determining SMI depth would represent an important contribution to assessing methane charge with respect to climate change, sediment stability, or potential energy resources.

316

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Fine-Scale Control of Microbial Communities in Deep Marine Sediments Fine-Scale Control of Microbial Communities in Deep Marine Sediments Fine-Scale Control of Microbial Communities in Deep Marine Sediments that Contain Hydrates and High Concentrations of Methane Authors: Colwell, F. (speaker, Oregon State University), Hangsterfer, A., Brodie, E., Daly, R., Holland, M., Briggs, B., Carini, P., Torres, M., Kastner, M., Long, P., Schaef, H., Delwiche, M., Winters, W., and Riedel, M. Venue: American Geophysical Union’s fall meeting in San Francisco, CA, December 10–14, 2007 (http://www.agu.org/meetings/fm07/ [external site]). Abstract: Deep subseafloor sediments with high concentrations of organic carbon and microbially generated methane contain microbial communities that play an important role in the biogeochemical cycling of carbon. However, there remains a limited understanding of the fine (centimeter)-scale sediment properties (e.g., grain size, presence/absence of hydrates) that determine key microbial attributes in deep marine sediments. This project’s objective is to determine the quantity, diversity, and distribution of microbial communities in the context of abiotic properties in gas-rich marine sediments. DNA was extracted from deep marine sediments cored from various continental shelf locations, including offshore India and the Cascadia Margin. Abiotic characterization of the same sediments included grain size analysis, chloride concentrations in sediment pore waters, and presence of hydrates in the sediments as determined by thermal anomalies. As in past studies of such systems, most of the samples yielded low levels of DNA (0.3-1.5 ng/g of sediment). Bacterial DNA appeared to be more easily amplified than archaeal DNA. Initial attempts to amplify DNA using primers specific for the methanogen functional gene, methyl-CoM-reductase, were unsuccessful. Infrequently, cores from relatively shallow sediments (e.g., 0.5 mbsf Leg 204, 1251B-1H) from central (Hydrate Ridge) and northern (offshore Vancouver Island) Cascadia and from India’s eastern margin contained macroscopically visible, pigmented biofilms. One of these biofilms was composed of high concentrations of cell clusters when viewed microscopically. The predominant cells in the Hydrate Ridge biofilm were large (ca. 10 um) cocci, and preliminary characterization of the 16S rDNA amplified and sequenced from this biofilm suggests the prevalence of a microbe with 97% similarity to mycobacteria. These discrete biofilm communities appear to be distinctive relative to the normally sparse distribution of cells in the sediments. By determining how the abiotic properties of deep marine sediments control the numbers and distribution of microbial communities that process organic matter, project researchers hope to provide better parameters for computational models that describe carbon cycling in these systems.

317

Technology on In-Situ Gas Generation to Recover Residual Oil Reserves  

Science Conference Proceedings (OSTI)

This final technical report covers the period October 1, 1995 to February 29, 2008. This chapter begins with an overview of the history of Enhanced Oil Recovery techniques and specifically, CO2 flood. Subsequent chapters conform to the manner consistent with the Activities, Tasks, and Sub-tasks of the project as originally provided in Exhibit C1 in the Project Management Plan dated September 20, 1995. These chapters summarize the objectives, status and conclusions of the major project activities performed during the project period. The report concludes by describing technology transfer activities stemming from the project and providing a reference list of all publications of original research work generated by the project team or by others regarding this project. The overall objective of this project was a final research and development in the United States a technology that was developed at the Institute for Geology and Development of Fossil Fuels in Moscow, Russia. Before the technology can be convincingly adopted by United States oil and gas producers, the laboratory research was conducted at Mew Mexico Institute of Mining and Technology. The experimental studies were conducted to measure the volume and the pressure of the CO{sub 2} gas generated according to the new Russian technology. Two experimental devices were designed, built and used at New Mexico Tech facilities for these purposes. The designed setup allowed initiating and controlling the reaction between the 'gas-yielding' (GY) and 'gas-forming' (GF) agents proposed by Russian technology. The temperature was controlled, and the generated gas pressure and volume were recorded during the reaction process. Additionally, the effect of surfactant addition on the effectiveness of the process was studied. An alternative GY reactant was tested in order to increase the efficiency of the CO2 gas generation process. The slim tube and the core flood experimental studies were conducted to define the sweep efficiency of the in-situ generated CO{sub 2} gas. A set of core flood experiments were conducted to define effect of surfactant on recovery efficiency. The results demonstrated obvious advantages of the foamy system over the brine solution in order to achieve higher sweep efficiency and recovery coefficient. It is shown that a slug injection is not an efficient method for mixing GY and GF solutions and it can't generate considerable gas inside the slim-tube.

Sayavur Bakhtiyarov

2008-02-29T23:59:59.000Z

318

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Multivariate Modeling of 3D9C Data for Constructing a Static Reservoir Model of Algal Mounds in the Paradox Basin, CO Multivariate Modeling of 3D9C Data for Constructing a Static Reservoir Model of Algal Mounds in the Paradox Basin, CO Multivariate Modeling of 3D9C Data for Constructing a Static Reservoir Model of Algal Mounds in the Paradox Basin, CO Authors: Paul La Pointe, FracMan Technology Group, Golder Associates Inc., Redmond, WA; Robert D. Benson, Colorado School of Mines, Golden, CO; and Claudia Rebne, Legacy Energy, Denver, CO. Venue: American Association of Petroleum Geologists/Rocky Mountain Section Annual Meeting in Snowbird, UT, October 7-9, 2007. Abstract: A 3D9C survey was carried out over a 6 square mile portion of the Roadrunner and Towaoc fields on the Ute Mountain Ute reservation in southwestern Colorado. This survey was jointly funded by DOE and the Southern Ute tribe’s Red Willow Corporation to promote development of Ismay algal mound plays in the Paradox Basin within Ute Mountain Tribal lands and elsewhere in the Paradox Basin. Multicomponent data were utilized to better delineate the external mound geometry as well as to estimate internal mound reservoir parameters such as matrix permeability, saturation, and porosity. Simple cross-plotting of various multicomponent attributes against reservoir properties did not provide the desired predictive accuracy, in part due to sub-optimal frequency content in components derived from the shear wave data. However, a multivariate statistical analysis greatly improved the predictive accuracy. These multivariate regressions were then used to prescribe reservoir properties for a static reservoir model, which in turn formed the basis for a dynamic reservoir simulation model of the project area to assess the usefulness of the multivariate relations developed. This poster presentation will illustrate the workflow used to carry out the multivariate modeling, key maps of the reservoir properties that were derived, the static model, and results from the dynamic simulation used to assess the usefulness of the approach. Results from wells drilled based on the seismic data also will be presented.

319

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Detailed Imaging of Facies and Fluid Distribution Within Carbonate Oil Reservoirs Detailed Imaging of Facies and Fluid Distribution Within Carbonate Oil Reservoirs Crosswell Seismic Amplitude-Versus-Offset for Detailed Imaging of Facies and Fluid Distribution Within Carbonate Oil Reservoirs Authors: Sean P. Trisch, Wayne D. Pennington, and Roger Turpening, Michigan Technological University, Houghton, MI. Venue: Seismological Society of America’s annual meeting in Waikaloa, Kona, HI., April 11–13, 2007 Abstract: Imaging of the Earth’s crust is increasingly being accomplished through the use of borehole-based sensors. Experience gained in recent crosswell seismic surveys may assist endeavors to image the near-borehole environment near plate boundaries or other places of scientific interest. A high-resolution crosswell seismic data set was collected over a Silurian (Niagaran) reef in Michigan’s Lower Peninsula. The survey was optimized for both reflection imaging purposes and the gathering of a wide range of incidence angles. The reflection image was intended to aid in interpretation of the reef structure at a level of detail never before possible with seismic methods. The survey was also conducted to maximize data available for study of the dependence of amplitudes with angle-of-incidence. Prestack angle data were processed to half-degree intervals and utilized for enhanced interpretation of the seismic image through partial stacks and through amplitude variation with angle (AVA) analyses. Frequencies as high as 3,000 Hz (the limit of the source sweep) were recorded, with a predominant signal at about 2,000 Hz; the well separation was 600 m, and the target reef is at 1,400–1,525 m depth. Many of the interfaces present within the area have small reflection amplitudes at narrow angles that increase substantially near the critical angle. Analyses were performed on various interfaces in the seismic section to compare with Zoeppritz-equation solutions, using rock data acquired through an extensive library of seismic and well logging data available for the area. These models were then compared with the actual AVA character acquired at the interface and matched as closely as possible. Through this analysis and match process, various rock property estimates were inferred or refined.

320

Oil & Natural Gas Technology DOE Award No.: DE-FE0000408 Final Report  

NLE Websites -- All DOE Office Websites (Extended Search)

Oil & Natural Gas Technology Oil & Natural Gas Technology DOE Award No.: DE-FE0000408 Final Report October 2009 - September 2012 Post Retort, Pre Hydro-treat Upgrading of Shale Oil Submitted by: Ceramatec Inc 2425 S. 900 W. Salt Lake City, UT 84119 Prepared by: John H. Gordon, PI Prepared for: United States Department of Energy National Energy Technology Laboratory January 25, 2013 Office of Fossil Energy Final Report: October 2009 - September 2012 Ceramatec Inc, 1 Disclaimer This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their em- ployees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process

Note: This page contains sample records for the topic "gas revolution technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

168 Int. J. Oil, Gas and Coal Technology, Vol. 2, No. 2, 2009 Copyright 2009 Inderscience Enterprises Ltd.  

E-Print Network (OSTI)

168 Int. J. Oil, Gas and Coal Technology, Vol. 2, No. 2, 2009 Copyright © 2009 Inderscience.Y. (2009) `Geology and coal potential of Somaliland', Int. J. Oil, Gas and Coal Technology, Vol. 2, No. 2, pp.168­185. Biographical notes: Mohammed Y. Ali has a degree in Exploration Geology, MSc

Ali, Mohammed

322

A TECHNOLOGY ASSESSMENT AND FEASIBILITY EVALUATION OF NATURAL GAS ENERGY FLOW MEASUREMENT ALTERNATIVES  

Science Conference Proceedings (OSTI)

Deregulation and open access in the natural gas pipeline industry has changed the gas business environment towards greater reliance on local energy flow rate measurement. What was once a large, stable, and well-defined source of natural gas is now a composite from many small suppliers with greatly varying gas compositions. Unfortunately, the traditional approach to energy flow measurement [using a gas chromatograph (GC) for composition assay in conjunction with a flow meter] is only cost effective for large capacity supplies (typically greater than 1 to 30 million scfd). A less costly approach will encourage more widespread use of energy measurement technology. In turn, the US will benefit from tighter gas inventory control, more efficient pipeline and industrial plant operations, and ultimately lower costs to the consumer. An assessment of the state and direction of technology for natural gas energy flow rate measurement is presented. The alternative technologies were ranked according to their potential to dramatically reduce capital and operating and maintenance (O and M) costs, while improving reliability and accuracy. The top-ranked technologies take an unconventional inference approach to the energy measurement problem. Because of that approach, they will not satisfy the fundamental need for composition assay, but have great potential to reduce industry reliance on the GC. Technological feasibility of the inference approach was demonstrated through the successful development of data correlations that relate energy measurement properties (molecular weight, mass-based heating value, standard density, molar ideal gross heating value, standard volumetric heating value, density, and volume-based heating value) to three inferential properties: standard sound speed, carbon dioxide concentration, and nitrogen concentration (temperature and pressure are also required for the last two). The key advantage of this approach is that inexpensive on-line sensors may be used to measure the inferential variables, which can then be applied (through the data correlations) to convert existing flow meters (ultrasonic, orifice, turbine, rotary, Coriolis, diaphragm, etc.) for on-line energy measurement. The practical issues for field development were evaluated using two transducers extracted from a $100 ultrasonic domestic gas meter, and a $400 infrared sensor.

Kendricks A. Behring II; Eric Kelner; Ali Minachi; Cecil R. Sparks; Thomas B. Morrow; Steven J. Svedeman

1999-01-01T23:59:59.000Z

323

COMPUTER LITERACY, ACCESS AND USE OF TECHNOLOGY IN THE FAMILY AND CONSUMER SCIENCES CLASSROOM.  

E-Print Network (OSTI)

??For years, schools across the nation have been joining the technology revolution. Today, students have at least some form of technology available to them in (more)

Jenkins, Dana Renee

2008-01-01T23:59:59.000Z

324

104 Int. J. Oil, Gas and Coal Technology, Vol. 4, No. 2, 2011 Copyright 2011 Inderscience Enterprises Ltd.  

E-Print Network (OSTI)

approach in modelling and simulation of shale gas reservoirs: application to New Albany Shale', Int. J. Oil104 Int. J. Oil, Gas and Coal Technology, Vol. 4, No. 2, 2011 Copyright © 2011 Inderscience Enterprises Ltd. A new practical approach in modelling and simulation of shale gas reservoirs: application

Mohaghegh, Shahab

325

IEEE TRANSACTION ON CONTROL SYSTEM TECHNOLOGY, VOL. XX, NO. Y, MONTH 2003 1 Control of Natural Gas Catalytic Partial  

E-Print Network (OSTI)

IEEE TRANSACTION ON CONTROL SYSTEM TECHNOLOGY, VOL. XX, NO. Y, MONTH 2003 1 Control of Natural Gas that reforms natural gas to hydrogen-rich mixture to feed the anode field of fuel cell stack is considered partial oxidation of the methane in the natural gas. We present a model-based control analysis and design

Peng, Huei

326

Greenhouse gas emission impacts of alternative-fueled vehicles: Near-term vs. long-term technology options  

DOE Green Energy (OSTI)

Alternative-fueled vehicle technologies have been promoted and used for reducing petroleum use, urban air pollution, and greenhouse gas emissions. In this paper, greenhouse gas emission impacts of near-term and long-term light-duty alternative-fueled vehicle technologies are evaluated. Near-term technologies, available now, include vehicles fueled with M85 (85% methanol and 15% gasoline by volume), E85 (85% ethanol that is produced from corn and 15% gasoline by volume), compressed natural gas, and liquefied petroleum gas. Long-term technologies, assumed to be available around the year 2010, include battery-powered electric vehicles, hybrid electric vehicles, vehicles fueled with E85 (ethanol produced from biomass), and fuel-cell vehicles fueled with hydrogen or methanol. The near-term technologies are found to have small to moderate effects on vehicle greenhouse gas emissions. On the other hand, the long-term technologies, especially those using renewable energy (such as biomass and solar energy), have great potential for reducing vehicle greenhouse gas emissions. In order to realize this greenhouse gas emission reduction potential, R and D efforts must continue on the long-term technology options so that they can compete successfully with conventional vehicle technology.

Wang, M.Q.

1997-05-20T23:59:59.000Z

327

TECHNOLOGY TRANSFER TO U.S. INDEPENDENT OIL AND NATURAL GAS PRODUCERS  

SciTech Connect

During FY99, the Petroleum Technology Transfer Council (PTTC) continued pursuing its mission of helping U.S. independent oil and gas producers make timely, informed technology decisions. PTfC's national organization has active grassroots programs that connect with independents through its 10 Regional Lead Organizations (RLOs). These activities--including technology workshops, resource centers, websites, newsletters, and other outreach efforts--are guided by regional Producer Advisory Groups (PAGs). The role of the national headquarters (HQ) staff includes planning and managing the PTTC program, conducting nation-wide technology transfer activities, and implementing a comprehensive communications effort. This technical progress report summarizes PTTC's accomplishments during FY99, which lay the groundwork for further growth in the future.

Donald Duttlinger

1999-12-01T23:59:59.000Z

328

TECHNOLOGY TRANSFER TO U.S. INDEPENDENT OIL AND NATURAL GAS PRODUCERS  

SciTech Connect

During FY99, the Petroleum Technology Transfer Council (PTTC) continued pursuing its mission of helping U.S. independent oil and gas producers make timely, informed technology decisions. PTTC's national organization has active grassroots programs that connect with independents through its 10 Regional Lead Organizations (RLOs). These activities--including technology workshops, resource centers, websites, newsletters, and other outreach efforts--are guided by regional Producer Advisory Groups (PAGs). The role of the national headquarters (HQ) staff includes planning and managing the PTTC program, conducting nation-wide technology transfer activities, and implementing a comprehensive communications effort. This technical progress report summarizes PTTC's accomplishments during FY99, which lay the groundwork for further growth in the future.

Unknown

1999-10-31T23:59:59.000Z

329

TECHNOLOGY TRANSFER TO U.S. INDEPENDENT OIL AND NATURAL GAS PRODUCERS  

SciTech Connect

During FY00, the Petroleum Technology Transfer Council (PTTC) continued pursuing its mission of helping U.S. independent oil and gas producers make timely, informed technology decisions. PTTC's national organization has active grassroots programs that connect with independents through its 10 Regional Lead Organizations (RLOs). These activities--including technology workshops, resource centers, websites, newsletters, and other outreach efforts--are guided by regional Producer Advisory Groups (PAGs). The role of the national headquarters (HQ) staff includes planning and managing the PTTC program, conducting nation-wide technology transfer activities, and implementing a comprehensive communications effort. This technical progress report summarizes PTTC's accomplishments during FY00, which lay the groundwork for further growth in the future.

Unknown

2000-05-01T23:59:59.000Z

330

F-Class Gas Turbine Technology Summary: Design Features, Reliability Statistics, and Durability Issues  

Science Conference Proceedings (OSTI)

This report summarizes the design features and capabilities of current F-class gas turbine models, and includes reliability/availability statistics and a summary of durability issues. The design matrix table includes models GT24/GT26 by Alstom, 7FA/9FA and 7FB/9FB by General Electric, M501F/M701F by Mitsubishi, and W501F by Siemens, presented in a format that facilitates a comparison of their design characteristics.BackgroundGas turbine technology continues ...

2012-12-31T23:59:59.000Z

331

In situ experiments of geothermal well stimulation using gas fracturing technology  

DOE Green Energy (OSTI)

The results of an experimental study of gas fracturing technology for geothermal well stimulation demonstrated that multiple fractures could be created to link water-filled boreholes with existing fractures. The resulting fracture network and fracture interconnections were characterized by mineback as well as flow tests. Commercial oil field fracturing tools were used successfully in these experiments. Simple scaling laws for gas fracturing and a brief discussion of the application of this technique to actual geothermal well stimulation are presented. 10 refs., 42 figs., 4 tabs.

Chu, T.Y.; Warpinski, N.; Jacobson, R.D.

1988-07-01T23:59:59.000Z

332

STATE OF THE ART AND FUTURE DEVELOPMENTS IN NATURAL GAS ENGINE TECHNOLOGIES  

DOE Green Energy (OSTI)

Current, state of the art natural gas engines provide the lowest emission commercial technology for use in medium heavy duty vehicles. NOx emission levels are 25 to 50% lower than state of the art diesel engines and PM levels are 90% lower than non-filter equipped diesels. Yet, in common with diesel engines, natural gas engines are challenged to become even cleaner and more efficient to meet environmental and end-user demands. Cummins Westport is developing two streams of technologies to achieve these goals for medium-heavy and heavy-heavy duty applications. For medium-heavy duty applications, lowest possible emissions are sought on SI engines without significant increase in complexity and with improvements in efficiency and BMEP. The selected path builds on the capabilities of the CWI Plus technology and recent diesel engine advances in NOx controls, providing potential to reduce emissions to 2010 values in an accelerated manner and without the use of Selective Catalytic Reduction or NOx Storage and Reduction technology. For heavy-heavy duty applications where high torque and fuel economy are of prime concern, the Westport-Cycle{trademark} technology is in field trial. This technology incorporates High Pressure Direct Injection (HPDI{trademark}) of natural gas with a diesel pilot ignition source. Both fuels are delivered through a single, dual common rail injector. The operating cycle is entirely unthrottled and maintains the high compression ratio of a diesel engine. As a result of burning 95% natural gas rather than diesel fuel, NOx emissions are halved and PM is reduced by around 70%. High levels of EGR can be applied while maintaining high combustion efficiency, resulting in extremely low NOx potential. Some recent studies have indicated that DPF-equipped diesels emit less nanoparticles than some natural gas vehicles [1]. It must be understood that the ultrafine particles emitted from SI natural gas engines are generally accepted to consist predominantly of VOCs [2], and that lubricating oil is a major contributor. Fitting an oxidation catalyst to the natural gas engine leads to a reduction in nanoparticles emissions in comparison to engines without aftertreatment [2,3,4]. In 2001, the Cummins Westport Plus technology was introduced with the C Gas Plus engine, a popular choice for transit bus applications. This incorporates drive by wire, fully integrated, closed loop electronic controls and a standard oxidation catalyst for all applications. The B Gas Plus and the B Propane Plus engines, with application in shuttle and school buses were launched in 2002 and 2003. The gas-specific oxidation catalyst operates in concert with an optimized ring-pack and liner combination to reduce total particulate mass below 0.01g/bhphr, combat ultrafine particles and control VOC emissions.

Dunn, M

2003-08-24T23:59:59.000Z

333

TECHNOLOGY TRANSFER TO U.S. INDEPENDENT OIL AND NATURAL GAS PRODUCERS  

SciTech Connect

The Petroleum Technology Transfer Council (PTTC) continued pursuing its mission of helping U.S. independent oil and natural gas producers make timely, informed technology decisions. Networking opportunities that occur with a Houston Headquarters (HQ) location are increasing name awareness. Focused efforts by Executive Director Don Duttlinger to interact with large independents, national service companies and some majors are continuing to supplement the support base of the medium to smaller industry participants around the country. PTTC is now involved in many of the technology-related activities that occur in high oil and natural gas activity areas. Access to technology remains the driving force for those who do not have in-house research and development capabilities and look to the PTTC to provide services and options for increased efficiency. Looking forward to the future, the Board, Regional Lead Organization (RLO) Directors and HQ staff developed a 10-year vision outlining what PTTC needs to accomplish in supporting a national energy plan. This vision has been communicated to Department of Energy (DOE) staff and PTTC looks forward to continuing this successful federal-state-industry partnership. As part of this effort, several more examples of industry using information gained through PTTC activities to impact their bottom line were identified. Securing the industry pull on technology acceptance was the cornerstone of this directional plan.

Unknown

2002-05-31T23:59:59.000Z

334

TECHNOLOGY TRANSFER TO U.S. INDEPENDENT OIL AND NATURAL GAS PRODUCERS  

SciTech Connect

In pursuing its mission of helping U.S. independent oil and gas producers make timely, informed technology decisions, the Petroleum Technology Transfer Council (PTTC) functions as a cohesive national organization that implements industry's directives through active regional programs. The role of the national headquarters (HQ) organization includes planning and managing the PTTC program, conducting nation-wide technology transfer activities, and implementing a comprehensive communications effort. PTTC relies on 10 Regional Lead Organizations (RLOs) as its main program delivery mechanism to industry. Through its regions, PTTC connects with independent oil and gas producers--through technology workshops, resources centers, websites, newsletters, and other outreach efforts. The organization effectively combines federal, state, and industry funding to achieve important goals for all of these sectors. This integrated funding base, combined with industry volunteers guiding PTTC's activities and the dedication of national and regional staff, are achieving notable results. PTTC is increasingly recognized as a critical resource for information and access to technologies, especially for smaller companies. This technical progress report summarizes PTTC's accomplishments during FY98, and its strategy for achieving further growth in the future.

Unknown

1998-10-31T23:59:59.000Z

335

TECHNOLOGY TRANSFER TO U.S. INDEPENDENT OIL AND NATURAL GAS PRODUCERS  

SciTech Connect

The Petroleum Technology Transfer Council (PTTC) continued pursuing its mission of helping U.S. independent oil and gas producers make timely, informed technology decisions during Fiscal Year 2000 (FY00). Functioning as a cohesive national organization, PTTC has active grassroots programs through its ten Regional Lead Organizations (RLOs) who bring research and academia to the table via their association with geological surveys and engineering departments. The regional directors connect with independent oil and gas producers through technology workshops, resource centers, websites, newsletters, various technical publications and other outreach efforts. These are guided by regional Producer Advisory Groups (PAGs), who are area operators and service companies working with the Regional Lead Organizations. The role of the national headquarters (HQ) staff includes planning and managing the PTTC program, conducting nation-wide technology transfer activities, and implementing a comprehensive communications effort. The organization effectively combines federal, state, and industry funding to achieve important goals for all of these sectors. This integrated funding base, combined with industry volunteers guiding PTTC's activities and the dedication of national and regional staff, are achieving notable results. PTTC is increasingly recognized as a critical resource for information and access to technologies, especially for smaller companies. This technical progress report summarizes PTTC's accomplishments during FY00, which lays the groundwork for further growth in the future. At a time of many industry changes and market movements, the organization has built a reputation and expectation to address industry needs of getting information distributed quickly which can impact the bottom line immediately.

Unknown

2000-11-01T23:59:59.000Z

336

Oil & Natural Gas Technology DOE Award No.: DE-FC26-01NT41330  

NLE Websites -- All DOE Office Websites (Extended Search)

8 8 (October 2009 - March 2010) Characterizing Natural Gas Hydrates in the Deep Water Gulf of Mexico: Applications for Safe Exploration and Production Activities Principal Author: John T. Balczewski Chevron Energy Technology Company 1400 Smith Street Houston, TX 77002 Prepared for: United States Department of Energy National Energy Technology Laboratory June 2010 Office of Fossil Energy i DISCLAIMER "This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, expressed or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus,

337

TECHNOLOGY TRANSFER TO U.S. INDEPENDENT OIL AND NATURAL GAS PRODUCERS  

SciTech Connect

The Petroleum Technology Transfer Council (PTTC) continued pursuing its mission of assisting U.S. independent oil and gas producers make timely, informed technology decisions by providing access to information during Fiscal Year 2002 (FY02). Functioning as a cohesive national organization, PTTC has active grassroots programs through its ten Regional Lead Organizations (RLOs) and three satellite offices that efficiently extend the program reach. They bring research and academia to the table via their association with geological surveys and engineering departments. The regional directors interact with independent oil and gas producers through technology workshops, resource centers, websites, newsletters, various technical publications and other outreach efforts. These are guided by regional Producer Advisory Groups (PAGs), who are area operators and service companies working with the regional networks. The role of the national Headquarters (HQ) staff includes planning and managing the PTTC program, conducting nation wide technology transfer activities, and implementing a comprehensive communications effort. The organization effectively combines federal funding through the Department of Energy's (DOE) Office of Fossil Energy with state and industry funding to achieve important goals for all of these sectors. This integrated funding base is combined with industry volunteers guiding PTTC's activities and the dedication of national and regional staff to achieve notable results. PTTC is increasingly recognized as a critical resource for information and access to technologies, especially for smaller companies without direct contact with R&D efforts. The DOE participation is managed through the National Energy Technology Laboratory (NETL), which deploys a national natural gas program via the Strategic Center for Natural Gas (SCNG) and a national oil program through the National Petroleum Technology Office (NTPO). This technical progress report summarizes PTTC's accomplishments during FY02. Activities were maintained at recent record levels. Strategic planning from multiple sources within the framework of the organization gives PTTC the vision to have even more impact in the future. The Houston Headquarters (HQ) location has strived to serve PTTC well in better connecting with producers and the service sector. PTTC's reputation for unbiased bottom line information stimulates cooperative ventures with other organizations. Efforts to build the contact database, exhibit at more trade shows and a new E-mail Technology Alert service are expanding PTTC's audience. All considered, the PTTC network has proven to be an effective way to reach domestic producers locally, regionally and nationally.

Unknown

2002-11-01T23:59:59.000Z

338

Application of new and novel fracture stimulation technologies to enhance the deliverability of gas storage wells  

SciTech Connect

Based on the information presented in this report, our conclusions regarding the potential for new and novel fracture stimulation technologies to enhance the deliverability of gas storage wells are as follows: New and improved gas storage well revitalization methods have the potential to save industry on the order of $20-25 million per year by mitigating deliverability decline and reducing the need for costly infill wells Fracturing technologies have the potential to fill this role, however operators have historically been reluctant to utilize this approach due to concerns with reservoir seal integrity. With advanced treatment design tools and methods, however, this risk can be minimized. Of the three major fracturing classifications, namely hydraulic, pulse and explosive, two are believed to hold potential to gas storage applications (hydraulic and pulse). Five particular fracturing technologies, namely tip-screenout fracturing, fracturing with liquid carbon dioxide, and fracturing with gaseous nitrogen, which are each hydraulic methods, and propellant and nitrogen pulse fracturing, which are both pulse methods, are believed to hold potential for gas storage applications and will possibly be tested as part of this project. Field evidence suggests that, while traditional well remediation methods such as blowing/washing, mechanical cleaning, etc. do improve well deliverability, wells are still left damaged afterwards, suggesting that considerable room for further deliverability enhancement exists. Limited recent trials of hydraulic fracturing imply that this approach does in fact provide superior deliverability results, but further RD&D work is needed to fully evaluate and demonstrate the benefits and safe application of this as well as other fracture stimulation technologies.

NONE

1995-04-01T23:59:59.000Z

339

Evaluation of Thermal Zero Liquid Discharge Treatment Technologies for Combined Cycle Gas Turbine Power Plants  

Science Conference Proceedings (OSTI)

A study was conducted to identify and update key details of zero liquid discharge (ZLD) water management systems currently operating at U.S. gas-fired combined cycle generating stations (CC). The study focused on not only the technologies applied, but also on the advantages and shortcomings of the various processes and summarized the lessons learned from the operating systems. Most ZLD's were found to employ one of four different types of water pretreatment process assemblies consisting of the following:...

2011-12-19T23:59:59.000Z

340

Choosing a coke-oven gas desulfurization system: a review of current technology  

SciTech Connect

Installation of coke-oven gas desulphurizing systems is primarily the result of air pollution control regulations. Although not currently profitable, operating costs can be minimized by choosing the technology most suited to the particular application. The Stretford Holmes, Takahax/Hirohax, Koppers Vacuum Carbonate, Sulfiban and Dravo/Still processes are discussed, together with criteria for economic analysis based on technical and by-product market evaluations.

Lynch, P.A.

1982-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "gas revolution technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Program on Technology Innovation: Combustion Exhaust Gas Monitoring with Laser Absorption Sensors  

Science Conference Proceedings (OSTI)

In current plant practice, the operator of a coal-fired boiler must typically rely on a limited number of point measurements of exhaust-gas oxygen and nitric oxides (NOX) to support combustion and selective catalytic reduction (SCR) control efforts with the goal of meeting emissions reduction mandates. As a possible alternative, tunable diode laser technology offers the potential for enabling a much richer set of measurements to be obtained using in situ, species-specific laser absorption sensors. This t...

2012-07-11T23:59:59.000Z

342

Solid-Phase Biotreatment Technology Studies Using Manufactured Gas Plant (MGP) Soils  

Science Conference Proceedings (OSTI)

The utility industry has been conducting site investigations to assess the presence of tar residuals at manufactured gas plant sites and to determine appropriate remediation actions. Tars typically contain volatile organic compounds (VOCs) and semi-volatile polycyclic aromatic hydrocarbon (PAH) compounds. This report evaluates the feasibility of remediating such tarry materials using a patented solid-phase bioremediation technology to target PAH degradation. Bench- and pilot scale treatability trials det...

2000-03-27T23:59:59.000Z

343

Mineral-wool industry: opportunities for natural gas technologies. Topical report, January-July 1987  

SciTech Connect

To quantify the opportunities for natural gas and identify technological advances needed to capture such opportunities, the mineral-wool industry was analyzed with respect to the principal companies, their capabilities, and markets. The mineral-wool industry is stable with a slightly declining market. Of its market segments, only commercial acoustic insulation (which is currently dominant) is likely to be affected by growth in the next ten years. The principal process is based on treatment of blast-furnace slags in a cupola furnace using coke as the fuel and reducing agent. Expanded use of gas, as a substitute for coke, would eliminate environmental problems and expand the latitude of suitable raw materials. The study provides insights into the mineral-wool industry and identifies factors that may constitute bases for future usage of natural gas.

Not Available

1988-05-01T23:59:59.000Z

344

Topsoe`s Wet gas Sulfuric Acid (WSA) process: An alternative technology for recovering refinery sulfur  

SciTech Connect

The Topsoe Wet gas Sulfuric Acid (WSA) process is a catalytic process which produces concentrated sulfuric acid from refinery streams containing sulfur compounds such as H{sub 2}S (Claus plant feed), Claus plant tail gas, SO{sub 2} (FCC off-gas, power plants), and spent sulfuric acid (alkylation acid). The WSA process recovers up to 99.97% of the sulfur value in the stream as concentrated sulfuric acid (93--98.5 wt%). No solid waste products or waste water is produced and no chemicals are consumed in the process. The simple process layout provides low capital cost and attractive operating economy. Twenty four commercial WSA plants have been licensed. The WSA process is explained in detail and comparisons with alternative sulfur management technology are presented. Environmental regulations applying to SO{sub x} abatement and sulfuric acid production plants are explained in the context of WSA plant operation.

Ward, J.W. [Haldor Topsoe, Inc., Houston, TX (United States)

1995-09-01T23:59:59.000Z

345

Fuel-cycle greenhouse gas emissions impacts of alternative transportation fuels and advanced vehicle technologies.  

DOE Green Energy (OSTI)

At an international conference on global warming, held in Kyoto, Japan, in December 1997, the United States committed to reduce its greenhouse gas (GHG) emissions by 7% over its 1990 level by the year 2012. To help achieve that goal, transportation GHG emissions need to be reduced. Using Argonne's fuel-cycle model, I estimated GHG emissions reduction potentials of various near- and long-term transportation technologies. The estimated per-mile GHG emissions results show that alternative transportation fuels and advanced vehicle technologies can help significantly reduce transportation GHG emissions. Of the near-term technologies evaluated in this study, electric vehicles; hybrid electric vehicles; compression-ignition, direct-injection vehicles; and E85 flexible fuel vehicles can reduce fuel-cycle GHG emissions by more than 25%, on the fuel-cycle basis. Electric vehicles powered by electricity generated primarily from nuclear and renewable sources can reduce GHG emissions by 80%. Other alternative fuels, such as compressed natural gas and liquefied petroleum gas, offer limited, but positive, GHG emission reduction benefits. Among the long-term technologies evaluated in this study, conventional spark ignition and compression ignition engines powered by alternative fuels and gasoline- and diesel-powered advanced vehicles can reduce GHG emissions by 10% to 30%. Ethanol dedicated vehicles, electric vehicles, hybrid electric vehicles, and fuel-cell vehicles can reduce GHG emissions by over 40%. Spark ignition engines and fuel-cell vehicles powered by cellulosic ethanol and solar hydrogen (for fuel-cell vehicles only) can reduce GHG emissions by over 80%. In conclusion, both near- and long-term alternative fuels and advanced transportation technologies can play a role in reducing the United States GHG emissions.

Wang, M. Q.

1998-12-16T23:59:59.000Z

346

Fuel-cycle greenhouse gas emissions impacts of alternative transportation fuels and advanced vehicle technologies.  

SciTech Connect

At an international conference on global warming, held in Kyoto, Japan, in December 1997, the United States committed to reduce its greenhouse gas (GHG) emissions by 7% over its 1990 level by the year 2012. To help achieve that goal, transportation GHG emissions need to be reduced. Using Argonne's fuel-cycle model, I estimated GHG emissions reduction potentials of various near- and long-term transportation technologies. The estimated per-mile GHG emissions results show that alternative transportation fuels and advanced vehicle technologies can help significantly reduce transportation GHG emissions. Of the near-term technologies evaluated in this study, electric vehicles; hybrid electric vehicles; compression-ignition, direct-injection vehicles; and E85 flexible fuel vehicles can reduce fuel-cycle GHG emissions by more than 25%, on the fuel-cycle basis. Electric vehicles powered by electricity generated primarily from nuclear and renewable sources can reduce GHG emissions by 80%. Other alternative fuels, such as compressed natural gas and liquefied petroleum gas, offer limited, but positive, GHG emission reduction benefits. Among the long-term technologies evaluated in this study, conventional spark ignition and compression ignition engines powered by alternative fuels and gasoline- and diesel-powered advanced vehicles can reduce GHG emissions by 10% to 30%. Ethanol dedicated vehicles, electric vehicles, hybrid electric vehicles, and fuel-cell vehicles can reduce GHG emissions by over 40%. Spark ignition engines and fuel-cell vehicles powered by cellulosic ethanol and solar hydrogen (for fuel-cell vehicles only) can reduce GHG emissions by over 80%. In conclusion, both near- and long-term alternative fuels and advanced transportation technologies can play a role in reducing the United States GHG emissions.

Wang, M. Q.

1998-12-16T23:59:59.000Z

347

Technology-Based Oil and Natural Gas Plays: Shale Shock! Could There Be Billions in the Bakken?  

Gasoline and Diesel Fuel Update (EIA)

Technology-Based Technology-Based Oil and Natural Gas Plays: Shale Shock! Could There Be Billions in the Bakken? Through the use of technology, U.S. oil and natural gas operators are converting previously uneconomic oil and natural gas resources into proved reserves and production. The Bakken Formation of the Williston Basin is a success story of horizontal drilling, fracturing, and completion technologies. The recent, highly productive oil field discoveries within the Bakken Formation did not come from venturing out into deep uncharted waters heretofore untapped by man, nor from blazing a trail into pristine environs never open to drilling before. Instead, success came from analysis of geologic data on a decades-old producing area, identification of uptapped resources, and application of the new drilling and completion technology necessary to exploit them. In short, it came from using technology

348

Strategies for the Commercialization and Deployment of Greenhouse Gas Intensity-Reducing Technologies and Practices  

Science Conference Proceedings (OSTI)

New technologies will be a critical component--perhaps the critical component--of our efforts to tackle the related challenges of energy security, climate change, and air pollution, all the while maintaining a strong economy. But just developing new technologies is not enough. Our ability to accelerate the market penetration of clean energy, enabling, and other climate-related technologies will have a determining impact on our ability to slow, stop, and reverse the growth in greenhouse gas (GHG) emissions. Title XVI, Subtitle A, of the Energy Policy Act of 2005 (EPAct 2005) directs the Administration to report on its strategy to promote the commercialization and deployment (C&D) of GHG intensity-reducing technologies and practices. The Act also requests the Administration to prepare an inventory of climate-friendly technologies suitable for deployment and to identify the barriers and commercial risks facing advanced technologies. Because these issues are related, they are integrated here within a single report that we, representing the Committee on Climate Change Science and Technology Integration (CCCSTI), are pleased to provide the President, the Congress, and the public. Over the past eight years, the Administration of President George W. Bush has pursued a series of policies and measures aimed at encouraging the development and deployment of advanced technologies to reduce GHG emissions. This report highlights these policies and measures, discusses the barriers to each, and integrates them within a larger body of other extant policy. Taken together, more than 300 policies and measures described in this document may be viewed in conjunction with the U.S. Climate Change Technology Program's (CCTP's) Strategic Plan, published in September 2006, which focuses primarily on the role of advanced technology and associated research and development (R&D) for mitigating GHG emissions. The CCTP, a multi-agency technology planning and coordination program, initiated by President Bush, and subsequently authorized in EPAct2005, is responsible for preparing this report on behalf CCCSTI. This report systematically examines the market readiness of key technologies important to meeting climate change mitigation goals. It assesses the barriers and business risks impeding their progress and greater market application. Importantly, by documenting the hundreds of Federal policies, programs, regulations, incentives, and other activities that are in effect and operating today to address these barriers, it provides a broad context for evaluating the adequacy of current policy and the potential need, if any, for additional measures that might be undertaken by government or industry. Finally, it draws conclusions about the current situation, identifies gaps and opportunities, and suggests analytical principles that should be applied to assess and formulate policies and measures to accelerate the commercialization and deployment of these technologies.

Committee on Climate Change Science and Technology Integration (CCCSTI)

2009-01-01T23:59:59.000Z

349

TECHNOLOGY TRANSFER TO U.S. INDEPENDENT OIL AND NATURAL GAS PRODUCERS  

SciTech Connect

The Petroleum Technology Transfer Council (PTTC) continued pursuing its mission of helping U.S. independent oil and gas producers make timely, informed technology decisions during Fiscal Year 2001 (FY01). Functioning as a cohesive national organization, PTTC has active grassroots programs through its ten Regional Lead Organizations (RLOs). They bring research and academia to the table via their association with geological surveys and engineering departments. The regional directors interact with independent oil and gas producers through technology workshops, resource centers, websites, newsletters, various technical publications and other outreach efforts. These are guided by regional Producer Advisory Groups (PAGs), who are area operators and service companies working with the regional networks. The role of the national Headquarters (HQ) staff includes planning and managing the PTTC program, conducting nation wide technology transfer activities, and implementing a comprehensive communications effort. The organization effectively combines federal funding through the Department of Energy's (DOE) Office of Fossil Energy, state, and industry funding to achieve important goals for all of these sectors. This integrated funding base, combined with industry volunteers guiding PTTC's activities and the dedication of national and regional staff, are achieving notable results. PTTC is increasingly recognized as a critical resource for information and access to technologies, especially for smaller companies without direct contact to R&D efforts. This technical progress report summarizes PTTC's accomplishments during FY01, which lays the groundwork for further growth in the future. At a time of many industry changes and wide market movements, the organization itself is adapting to change. PTTC has built a reputation and expectation among producers and other industry participants to quickly distribute information addressing technical needs. The organization efficiently has an impact on business economics as the focus remains on proven applicable technologies, which target cost reduction and efficiency gains.

Donald Duttlinger

2001-11-01T23:59:59.000Z

350

Innovation in Nuclear Technology for the Least Product Price and Cost  

SciTech Connect

In energy markets, costs dominate for all new technology introductions (pressure valves, gas turbines, reactors) both now and far into the future. Technology improves, and costs are reduced as markets are penetrated with the trend following a learning/experience curve (MCE) based on classic economic forces. The curve followed is governed by development costs and market targets, and nuclear systems follow such a curve in order to compete with other technologies and projected future cost for alternate energy initiatives. Funding impacts directly on market penetration and on the ''learning rate.'' The CANDU/AECL development path (experience curve) is a chosen balance between evolution and revolution for a competitive advantage.

Duffey, Romney

2003-09-01T23:59:59.000Z

351

The evaluation of waterfrac technology in low-permeability gas sands in the East Texas basin  

E-Print Network (OSTI)

The petroleum engineering literature clearly shows that large proppant volumes and concentrations are required to effectively stimulate low-permeability gas sands. To pump large proppant concentrations, one must use a viscous fluid. However, many operators believe that low-viscosity, low-proppant concentration fracture stimulation treatments known as ??waterfracs?? produce comparable stimulation results in low-permeability gas sands and are preferred because they are less expensive than gelled fracture treatments. This study evaluates fracture stimulation technology in tight gas sands by using case histories found in the petroleum engineering literature and by using a comparison of the performance of wells stimulated with different treatment sizes in the Cotton Valley sands of the East Texas basin. This study shows that large proppant volumes and viscous fluids are necessary to optimally stimulate tight gas sand reservoirs. When large proppant volumes and viscous fluids are not successful in stimulating tight sands, it is typically because the fracture fluids have not been optimal for the reservoir conditions. This study shows that waterfracs do produce comparable results to conventional large treatments in the Cotton Valley sands of the East Texas basin, but we believe it is because the conventional treatments have not been optimized. This is most likely because the fluids used in conventional treatments are not appropriate or have not been used appropriately for Cotton Valley conditions.

Tschirhart, Nicholas Ray

2005-08-01T23:59:59.000Z

352

Development and Application of Gas Sensing Technologies to Enable Boiler Balancing  

SciTech Connect

Identifying gas species and their quantification is important for optimization of many industrial applications involving high temperatures, including combustion processes. CISM (Center for Industrial Sensors and Measurements) at the Ohio State University has developed CO, O{sub 2}, NO{sub x}, and CO{sub 2} sensors based on TiO{sub 2} semiconducting oxides, zirconia and lithium phosphate based electrochemical sensors and sensor arrays for high-temperature emission control. The underlying theme in our sensor development has been the use of materials science and chemistry to promote high-temperature performance with selectivity. A review article presenting key results of our studies on CO, NO{sub x}, CO{sub 2} and O{sub 2} sensors is described in: Akbar, Sheikh A.; Dutta, Prabir K. Development and Application of Gas Sensing Technologies for Combustion Processes, PowerPlant Chemistry, 9(1) 2006, 28-33.

Dutta, Prabir

2008-12-31T23:59:59.000Z

353

TECHNOLOGIES TO ENHANCE THE OPERATION OF EXISTING NATURAL GAS COMPRESSION INFRASTRUCTURE  

Science Conference Proceedings (OSTI)

This quarterly report documents work performed under Tasks 15, 16, and 18 through 23 of the project entitled: ''Technologies to Enhance the Operation of Existing Natural Gas Compression Infrastructure''. The project objective is to develop and substantiate methods for operating integral engine/compressors in gas pipeline service, which reduce fuel consumption, increase capacity, and enhance mechanical integrity. The report first documents a survey site test performed on a TCVC10 engine/compressor installed at Dominion's Groveport Compressor Station. This test completes planned screening efforts designed to guide selection of one or more units for design analysis and testing with emphasis on identification and reduction of compressor losses. The report further presents the validation of the simulation model for the Air Balance tasks and outline of conceptual manifold designs.

Anthony J. Smalley; Ralph E. Harris; Gary D. Bourn; Danny M. Deffenbaugh

2005-07-27T23:59:59.000Z

354

TECHNOLOGIES TO ENHANCE THE OPERATION OF EXISTING NATURAL GAS COMPESSION INFRASTRUCTURE  

SciTech Connect

This quarterly report documents work performed under Tasks 15, 16, and 18 through 23 of the project entitled: ''Technologies to Enhance the Operation of Existing Natural Gas Compression Infrastructure''. The project objective is to develop and substantiate methods for operating integral engine/compressors in gas pipeline service, which reduce fuel consumption, increase capacity, and enhance mechanical integrity. The report presents results of design analysis performed on the TCVC10 engine/compressor installed at Dominion's Groveport Compressor Station to develop options and guide decisions for reducing pulsations and enhancing compressor system efficiency and capacity. The report further presents progress on modifying and testing the laboratory GMVH6 at SwRI for correcting air imbalance.

Anthony J. Smalley; Ralph E. Harris; Gary D. Bourn; Danny M. Deffenbaugh

2006-01-24T23:59:59.000Z

355

TECHNOLOGIES TO ENHANCE THE OPERATION OF EXISTNG NATURAL GAS COMPRESSION INFRASTRUCTURE  

Science Conference Proceedings (OSTI)

This quarterly report documents work performed under Tasks 15, 16, and 18 through 23 of the project entitled: ''Technologies to Enhance the Operation of the Existing Natural Gas Compression Infrastructure''. The project objective is to develop and substantiate methods for operating integral engine/compressors in gas pipeline service, which reduce fuel consumption, increase capacity, and enhance mechanical integrity. The report first documents a survey test performed on an HBA-6 engine/compressor installed at Duke Energy's Bedford Compressor Station. This is one of several tests planned, which will emphasize identification and reduction of compressor losses. Additionally, this report presents a methodology for distinguishing losses in compressor attributable to valves, irreversibility in the compression process, and the attached piping (installation losses); it illustrates the methodology with data from the survey test. The report further presents the validation of the simulation model for the Air Balance tasks and outline of conceptual manifold designs.

Anthony J. Smalley; Ralph E. Harris; Gary D. Bourn; Danny M. Deffenbaugh

2005-01-28T23:59:59.000Z

356

Demonstration of Natural Gas Engine Driven Air Compressor Technology at Department of Defense Industrial Facilities  

E-Print Network (OSTI)

Recent downsizing and consolidation of Department of Defense (DOD) facilities provides an opportunity to upgrade remaining facilities with more efficient and less polluting equipment. Use of air compressors by the DOD is widespread and the variety of tools and machinery that operate on compressed air is increasing. The energy cost of operating a natural gas engine-driven air compressor (NGEDAC) is usually lower than the cost of operating an electric-driven air compressor. Initial capital costs are offset by differences in prevailing utility rates, efficiencies of partial load operation, reductions in peak demand, heat recovery, and avoiding the cost of back-up generators. Natural gas, a clean-burning fuel, is abundant and readily available. In an effort to reduce its over-all environmental impact and energy consumption, the U.S. Army plans to apply NGEDAC technology in support of fixed facilities compressed air systems. Site assessment and demonstration results are presented in this paper.

Lin, M.; Aylor, S. W.; Van Ormer, H.

2002-04-01T23:59:59.000Z

357

TECHNOLOGIES TO ENHANCE THE OPERATION OF EXISTING NATURAL GAS COMPRESSION INFRASTRUCTURE  

Science Conference Proceedings (OSTI)

This quarterly report documents work performed under Tasks 15, 16, and 18 through 23 of the project entitled: ''Technologies to Enhance the Operation of Existing Natural Gas Compression Infrastructure''. The project objective is to develop and substantiate methods for operating integral engine/compressors in gas pipeline service, which reduce fuel consumption, increase capacity, and enhance mechanical integrity. The report first summarizes key results from survey site tests performed on an HBA-6 installed at Duke Energy's Bedford compressor station, and on a TCVC10 engine/compressor installed at Dominion's Groveport Compressor Station. The report then presents results of design analysis performed on the Bedford HBA-6 to develop options and guide decisions for reducing pulsations and enhancing compressor system efficiency and capacity. The report further presents progress on modifying and testing the laboratory GMVH6 at SwRI for correcting air imbalance.

Anthony J. Smalley; Ralph E. Harris; Gary D. Bourn; Danny M. Deffenbaugh

2005-10-27T23:59:59.000Z

358

Title: A brief history of the Rolls-Royce University Technology Centre in Gas Turbine Noise at the Institute of Sound and Vibration Research  

E-Print Network (OSTI)

Report Title: A brief history of the Rolls-Royce University Technology Centre in Gas Turbine Noise and systems engineering, gas turbine transmission systems and gas turbine noise. The UTC in gas turbine noise to generation and propagation of noise from gas turbine engines. Aircraft noise is a critical technical issue

Sóbester, András

359

Science and Technology Development to Integrate Energy Production and Greenhouse Gas Management  

SciTech Connect

This paper reviews the carbon cycle from the point of view of past and present human influence. Potential future human input to the cycle through science and technology to manage atmospheric greenhouse gas are considered. The review suggests that humans will need to ingeniously exploit even more energy to integrate its use with control of atmospheric greenhouse gases. Continuing development and application of energy is essential if the development of human society is to be sustained through the coming centuries. The continuing development of nuclear energy seems an essential energy supply component.

Pendergast, D.

2004-10-03T23:59:59.000Z

360

Hydrogen Gas Production from Nuclear Power Plant in Relation to Hydrogen Fuel Cell Technologies Nowadays  

Science Conference Proceedings (OSTI)

Recently, world has been confused by issues of energy resourcing, including fossil fuel use, global warming, and sustainable energy generation. Hydrogen may become the choice for future fuel of combustion engine. Hydrogen is an environmentally clean source of energy to end-users, particularly in transportation applications because without release of pollutants at the point of end use. Hydrogen may be produced from water using the process of electrolysis. One of the GEN-IV reactors nuclear projects (HTGRs, HTR, VHTR) is also can produce hydrogen from the process. In the present study, hydrogen gas production from nuclear power plant is reviewed in relation to commercialization of hydrogen fuel cell technologies nowadays.

Yusibani, Elin [Research Center for Hydrogen Industrial Use and Storage, AIST (Japan); Department of Physics, Universitas Syiah Kuala (Indonesia); Kamil, Insan; Suud, Zaki [Department of Physics, Institut Teknologi Bandung (Indonesia)

2010-06-22T23:59:59.000Z

Note: This page contains sample records for the topic "gas revolution technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Oil & Natural Gas Technology DOE Award No.: DE-FC26-01NT41330  

NLE Websites -- All DOE Office Websites (Extended Search)

R19 R19 (April 2010 - September 2010) Characterizing Natural Gas Hydrates in the Deep Water Gulf of Mexico: Applications for Safe Exploration and Production Activities Principal Author: John T. Balczewski Chevron Energy Technology Company 6001 Bollinger Canyon Road, CHVPKD San Ramon, CA 94583 Prepared for: United States Department of Energy National Energy Technology Laboratory October 2010 Office of Fossil Energy i DISCLAIMER "This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, expressed or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus,

362

TECHNOLOGY TRANSFER TO U.S. INDEPENDENT OIL AND NATURAL GAS PRODUCERS  

SciTech Connect

The Petroleum Technology Transfer Council (PTTC) continued pursuing its mission of helping U.S. independent oil and natural gas producers make timely, informed technology decisions. PTTC's Board made a strategic decision to relocate the Headquarters (HQ) office from Washington, DC to Houston, Texas. Driving force behind relocation was to better connect with independent producers, but cost savings could also be realized. Relocation was accomplished in late December 2000, with the HQ office being fully operational by January 2001. Early indications are that the HQ relocation is, in fact, enabling better networking with senior executives of independents in the Houston oil community. New Board leadership, elected in March 2001, will continue to effectively guide PTTC.

Unknown

2001-05-01T23:59:59.000Z

363

CRC handbook of laser science and technology. Volume 3. Gas lasers  

Science Conference Proceedings (OSTI)

This book describes the fundamentals of gas lasers. It provides information and data on neutral gas lasers, ionized gas lasers, and molecular gas lasers. Concluding this volume is an extensive table of all gas laser wavelengths.

Weber, M.J.

1982-01-01T23:59:59.000Z

364

Advanced Acid Gas Separation Technology for the Utilization of Low Rank Coals  

SciTech Connect

Air Products has developed a potentially ground-breaking technology Sour Pressure Swing Adsorption (PSA) to replace the solvent-based acid gas removal (AGR) systems currently employed to separate sulfur containing species, along with CO{sub 2} and other impurities, from gasifier syngas streams. The Sour PSA technology is based on adsorption processes that utilize pressure swing or temperature swing regeneration methods. Sour PSA technology has already been shown with higher rank coals to provide a significant reduction in the cost of CO{sub 2} capture for power generation, which should translate to a reduction in cost of electricity (COE), compared to baseline CO{sub 2} capture plant design. The objective of this project is to test the performance and capability of the adsorbents in handling tar and other impurities using a gaseous mixture generated from the gasification of lower rank, lignite coal. The results of this testing are used to generate a high-level pilot process design, and to prepare a techno-economic assessment evaluating the applicability of the technology to plants utilizing these coals.

Kloosterman, Jeff

2012-12-31T23:59:59.000Z

365

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on the  

NLE Websites -- All DOE Office Websites (Extended Search)

the Performance of Class 2 and Class 3 Hydrate Deposits during Co-Production with Conventional Gas the Performance of Class 2 and Class 3 Hydrate Deposits during Co-Production with Conventional Gas The Performance of Class 2 and Class 3 Hydrate Deposits during Co-Production with Conventional Gas (OTC 19435) Authors: George J. Moridis (speaker), Matthew T. Reagan, and Keni Zhang Venue: 2008 Offshore Technology Conference, Houston, Texas, May 5-8, 2008 ( http://www.spe.org and http://www.smenet.org [external sites] ) Abstract: Recent numerical studies have provided strong indications that it is possible to produce large volumes of gas from natural hydrate deposits at high rates (in excess of 10 MMSCFD) for long times by depressurization-induced dissociation of hydrates. Of the various factors that can adversely affect the production potential of hydrates, low temperatures have one of the strongest negative impacts. These can be caused by low initial temperatures, increasing stability of the hydrate (as defined by the deviation between the temperature of the deposit and the equilibrium temperature at the reservoir pressure), and by an advanced stage of dissociation (a strongly endothermic reaction) when substantial amounts of hydrates remain. The reasons for the production decline include a reduction in the rate of the hydrate dissociation at lower temperatures and the evolution of flow restrictions in the vicinity of the well caused by the formation of hydrate and/or ice in the vicinity of the wellbore. The latter is caused by continuous cooling, and is the reason why large amounts of gas that may have been released in the reservoir in the course of earlier dissociation cannot be easily recovered.

366

What Makes a Revolution? Disruptive Technology and Social Change  

Science Conference Proceedings (OSTI)

Never before? Every age tends to think it is special, facing problems that have never occurred before [mdash ] the 'arrogance of the present'. Disruption has occurred before, yet this generation (or the last, or the next) might well be facing unique ...

P. M. Hughes; G. Cosier

2001-10-01T23:59:59.000Z

367

DOE-Supported Technology Passes Scale-Up Test Converting CO DOE-Sponsored Research Improves Gas Turbine Performance  

NLE Websites -- All DOE Office Websites (Extended Search)

into Valuable Materials into Valuable Materials Publications News Release Release Date: June 17, 2013 DOE-Sponsored Research Improves Gas Turbine Performance DOE Lab Receives Award for Work on Drilling Technology An innovative airfoil manufacturing technology that promises to improve the performance of state-of-the-art gas turbines has been commercialized through research sponsored by the U.S. Department of Energy. Photo courtesy of Mikro Systems, Inc. Washington, D.C. - An innovative airfoil manufacturing technology that promises to improve the performance of state-of-the-art gas turbines has been commercialized through research sponsored by the U.S. Department of Energy (DOE). The technology - which is expected to contribute to cleaner, more reliable and affordable domestic energy production as well as creating new

368

Signposts of Change in Evolving Natural Gas Markets: Key Factors Affecting Expected Future Supply and Demand for Natural Gas in the United States  

Science Conference Proceedings (OSTI)

In recent years, the North American natural gas industry has undergone a major restructuring as a result of the so-called shale revolution.This is an amazing situation when one considers the magnitude of the changes the shale revolution has spurred not only in domestic natural gas markets, but across many sectors of the overall economy.In essence, the shale revolution is a black swan event that many industry observers consider to have been a once in more than ...

2013-12-18T23:59:59.000Z

369

Technology Adoption and Regulatory Regimes: Gas Turbines Electricity Generators from 1980 to 2001  

E-Print Network (OSTI)

Scheibel (1997) Current Gas Turbine Developments and Futurefor Heavy-Duty Gas Turbines, October 2000. Available onlineNext Evolution of the F Gas Turbine, April 2001. Available

Ishii, Jun

2004-01-01T23:59:59.000Z

370

TECHNOLOGY TRANSFER TO U.S. INDEPENDENT OIL AND NATURAL GAS PRODUCERS  

Science Conference Proceedings (OSTI)

The Petroleum Technology Transfer Council (PTTC) continued pursuing its mission of assisting U.S. independent oil and gas producers to make timely, informed technology decisions. Functioning as a cohesive national organization, PTTC has active grassroots programs through its 10 Regional Lead Organizations (RLOs) and 3 Satellite Offices that encompass all of the oil- and natural gas-producing regions in the U.S. Active volunteer leadership from the Board and regional Producer Advisory Groups keeps activities focused on producer's needs. Technical expertise and personal networks of national and regional staff enable PTTC to deliver focused, technology-related information in a manner that is cost and time effective for independents. The organization effectively combines federal funding through the Department of Energy's (DOE) Office of Fossil Energy with matching state and industry funding, forming a unique partnership. This final report summarizes PTTC's accomplishments. In this final fiscal year of the contract, activities exceeded prior annual activity levels by significant percentages. Strategic planning implemented during the year is focusing PTTC's attention on changes that will bear fruit in the future. Networking and connections are increasing PTTC's sphere of influence with both producers and the service sector. PTTC's reputation for unbiased bottom-line information stimulates cooperative ventures. In FY03 PTTC's regions held 169 workshops, drawing 8,616 attendees. There were nearly 25,000 reported contacts. This represents a 38% increase in attendance and 34% increase in contacts as compared to FY02 activity. Repeat attendance at regional workshops, a measure of customer satisfaction and value received, remained strong at 50%. 39% of participants in regional workshops respond ''Yes'' on feedback forms when asked if they are applying technologies based on knowledge gained through PTTC. This feedback confirms that producers are taking action with the information they receive. RLO Directors captured examples demonstrating how PTTC activities influenced industry activity. Additional follow-up in all regions explored industry's awareness of PTTC and the services it provides. PTTC publishes monthly case studies in the ''Petroleum Technology Digest in World Oil'' and monthly Tech Connections columns in the ''American Oil and Gas Reporter''. Email Tech Alerts are utilized to notify the O&G community of DOE solicitations and demonstration results, PTTC key technical information and meetings, as well as industry highlights. Workshop summaries are posted online at www.pttc.org. PTTC maintains an active exhibit schedule at national industry events. The national communications effort continues to expand the audience PTTC reaches. The network of national and regional websites has proven effective for conveying technology-related information and facilitating user's access to basic oil and gas data, which supplement regional and national newsletters. The regions frequently work with professional societies and producer associations in co-sponsored events and there is a conscious effort to incorporate findings from DOE-supported research, development and demonstration (RD&D) projects within events. The level of software training varies by region, with the Rocky Mountain Region taking the lead. Where appropriate, regions develop information products that provide a service to industry and, in some cases, generate moderate revenues. Data access is an on-going industry priority, so all regions work to facilitate access to public source databases. Various outreach programs also emanate from the resource centers, including targeted visits to producers.

Donald F. Duttlinger; E. Lance Cole

2003-12-15T23:59:59.000Z

371

The Fuel Processing Research Facility - A Platform for the Conduct of Synthesis Gas Technology R&D  

DOE Green Energy (OSTI)

Vision 21 is the U. S. Department of Energy's initiative to deploy high efficiency, ultraclean co-production coal conversion power plants in the twenty-first century. These plants will consist of power and co-production modules, which are integrated to meet specific power and chemical markets. A variety of fuel gas processing technology issues involving gas separations, cleanup, gas-to-liquid fuels production and chemical synthesis, to mention a few, will be addressed by the program. The overall goal is to effectively eliminate, at competitive costs, environmental concerns associated with the use of fossil fuels for producing electricity and transportation fuels. The Fuel Processing Research Facility (FPRF) was developed as a fuel-flexible platform to address many of these technology needs. The facility utilizes a simplified syngas generator that is capable of producing 2,000 standard cubic feet per hour of 900 degree Celsius and 30 atmosphere synthesis gas that can be tailored to the gas composition of interest. It was built on a ''mid-scale'' level in an attempt to successfully branch the traditionally difficult scale-up from laboratory to pilot scale. When completed, the facility will provide a multi-faceted R&D area for the testing of fuel cells, gas separation technologies, and other gas processing unit operations.

Monahan, Michael J.; Berry, David A.; Gardner, Todd H.; Lyons, K. David

2001-11-06T23:59:59.000Z

372

StarWars Laser Technology Applied to Drilling and Completing Gas Wells  

NLE Websites -- All DOE Office Websites (Extended Search)

u' m .,. . Society of Petroleum Engineers u I SPE 49259 StarWars Laser Technology Applied to Drilling and Completing Gas Wells R.M. Graves, SPE, Colorado School of Mines; and D.G. O'Brien, PE, SPE, Solutions Engineering Copyr@ht 1998, Scdety of Petroleum Engineers, Inc. This paper was prapared for presentation at the 1998 SPE Annual Technicar Conference and Exhibition bald in New Orteans, Lcuisiana, 27-30 September 1998, This paper waa selected for presentation by en SPE Program Commiftee folrowing review of information contained in an abstract submitted by the author(a). Contents of the paper, as prasented, have not been reviewed by the Society of Petroleum Engineers and are subject to correction by the author(s). The materiar, as presented, does not necessarily reflect any position of the .%ciety of Petroleum Engineers, its officers, or members. Papers prasented at SPE meetings

373

Near-Zero NOx Combustion Technology for ATS Mercury 50 Gas Turbine  

SciTech Connect

A project to demonstrate a near-zero NOx, catalytic combustion technology for natural gas-fired, industrial gas turbines is described. In a cooperative effort between Solar Turbines Incorporated and Precision Combustion Incorporated (PCI), proof-of-concept rig testing of PCI's fuel-rich catalytic combustion technology has been completed successfully. The primary technical goal of the project was to demonstrate NOx and CO emissions below 5ppm and 10 ppm, respectively, (corrected to 15% O{sub 2}) at realistic gas turbine operating conditions. The program consisted of two tasks. In the first task, a single prototype RCL{trademark} (Rich Catalytic Lean Burn) module was demonstrated at Taurus 70 (7.5 Mw) operating conditions (1.6 MPa, 16 atm) in a test rig. For a Taurus 70 engine, eight to twelve RCL modules will be required, depending on the final system design. In the second task, four modules of a similar design were adapted to a Saturn engine (1 Mw) test rig (600 kPa, 6 atm) to demonstrate gas turbine light-off and operation with an RCL combustion system. This project was initially focused on combustion technology for the Mercury 50 engine. However, early in the program, the Taurus 70 replaced the Mercury. This substitution was motivated by the larger commercial market for an ultra-low NOx Taurus 70 in the near-term. Rig tests using a single prototype RCL module at Taurus 70 conditions achieved NOx emissions as low as 0.75 ppm. A combustor turndown of approximately 110C (200F) was achieved with NOx and CO emissions below 3 ppm and 10 ppm, respectively. Catalyst light-off occurred at an inlet temperature of 310C (590F). Once lit the module remained active at inlet air temperatures as low as 204C (400F). Combustor pressure oscillations were acceptably low during module testing. Single module rig tests were also conducted with the Taurus 70 module reconfigured with a central pilot fuel injector. Such a pilot will be required in a commercial RCL system for turbine light-off and transient operation. At and near simulated full load engine conditions, the pilot operated at low pilot fueling rates without degrading overall system emissions. In the second project task, a set of four Taurus 70 modules was tested in an existing Saturn engine rig. The combustion system allowed smooth engine startup and load variation. At steady state conditions (between 82% and 89.7% engine speed; 32% and 61% load), NOx and CO emissions were below 3ppm and 10ppm, respectively. Rig limitations unrelated to the RCL technology prevented low emissions operation outside of this speed range. Combustor pressure oscillations were low, below 0.25 % (peak-to-peak) of the mean combustor pressure.

Kenneth Smith

2004-12-31T23:59:59.000Z

374

Greenhouse Gas Return on Investment: A New Metric for Energy Technology  

E-Print Network (OSTI)

to decision making beyond energy technology. ACKNOWLEDGMENTSA New Metric for Energy Technology Corinne Reich-Weiser ,INTRODUCTION Alternative energy technologies such as solar,

Reich-Weiser, Corinne; Dornfeld, David; Horne, Steve

2008-01-01T23:59:59.000Z

375

Membrane technologies for hydrogen and carbon monoxide recovery from residual gas streams. Tecnologas de membranas para la recuperacin de hidrgeno y monxido de carbono de gases residuales.  

E-Print Network (OSTI)

??This PhD thesis work is aimed to the separation and recovery of valuable gases from industrial residual gas streams by means of membrane technology. In (more)

David, Oana Cristina

2012-01-01T23:59:59.000Z

376

A technical and economic analysis of a natural gas combined cycle power plant with carbon dioxide capture using membrane separation technology.  

E-Print Network (OSTI)

?? Carbon dioxide (CO2) capture and storage (CCS) is a key technology to reduce anthropogenic greenhouse gas emissions and mitigate the potential effects of climate (more)

Ducker, Michael Jay

2012-01-01T23:59:59.000Z

377

Gas  

Science Conference Proceedings (OSTI)

... Implements a gas based on the ideal gas law. It should be noted that this model of gases is niave (from many perspectives). ...

378

Greenhouse Gas Return on Investment: A New Metric for Energy Technology  

E-Print Network (OSTI)

CarbonPlanet, 2007, Greenhouse Gas Emissions by Country,In this discussion of greenhouse gas emissions and energyGreenhouse Gas Return on Investment: A New Metric for Energy

Reich-Weiser, Corinne; Dornfeld, David; Horne, Steve

2008-01-01T23:59:59.000Z

379

Technology Adoption and Regulatory Regimes: Gas Turbines Electricity Generators from 1980 to 2001  

E-Print Network (OSTI)

conjunction with falling natural gas prices, has spurred thesigni?cant fall in natural gas prices in 1985. Furthermore,attributable to a bump in natural gas prices during 1993. 29

Ishii, Jun

2004-01-01T23:59:59.000Z

380

Technology Adoption and Regulatory Regimes: Gas Turbines Electricity Generators from 1980 to 2001  

E-Print Network (OSTI)

with falling natural gas prices, has spurred the developmentsigni?cant fall in natural gas prices in 1985. Furthermore,to a bump in natural gas prices during 1993. 29 In contrast,

Ishii, Jun

2004-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "gas revolution technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Assessing the Potential of Using Hydrate Technology to Capture, Store and Transport Gas for the Caribbean Region  

E-Print Network (OSTI)

Monetizing gas has now become a high priority issue for many countries. Natural gas is a much cleaner fuel than oil and coal especially for electricity generation. Approximately 40 percent of the world's natural gas reserves remain unusable because of lack of economic technology. Gas produced with oil poses a challenge of being transported and is typically flared or re-injected into the reservoir. These are gas transportation issues we now face. Gas hydrate may be a viable means of capturing, storing and transporting stranded and associated gas. For example, stranded gas in Trinidad could be converted to gas hydrates and transported to the islands of the Caribbean. This study will seek to address some of the limitations from previous studies on transporting natural gas as a hydrate while focusing on small scale transportation of natural gas to the Caribbean Islands. This work proposes a workflow for capturing, storing and transporting gas in the hydrate form, particularly for Caribbean situations where there are infrastructural constraints such as lack of pipelines. The study shows the gas hydrate value chain for transportation of 5 MMscf/d of natural gas from Trinidad to Jamaica. The analysis evaluated the water required for hydrate formation, effect of composition on hydrate formation, the energy balance of the process, the time required for formation, transportation and dissociation and preliminary economics. The overall energy requirement of the process which involves heating, cooling and expansion is about 15-20 percent of the energy of the gas transported in hydrate form. The time estimated for the overall process is 2030 hrs. The estimated capital cost to capture and transport 5 MMscf/d from Trinidad to Jamaica is about US$ 30 million. The composition of the gas sample can affect the conditions of formation, heating value and the expansion process. In summary, there is great potential for transporting natural gas by gas hydrate on a small scale based on the proposed hydrate work flow. This study did not prove commerciality at this time, however, some of the limitations require further evaluations and these include detailed modeling of the formation time, dissociation time and heat transfer capabilities.

Rajnauth, Jerome Joel

2010-12-01T23:59:59.000Z

382

Energy & the Industrial Revolution: Past, Present & Future | Argonne  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy & the Industrial Revolution: Past, Present & Future Energy & the Industrial Revolution: Past, Present & Future Event Sponsor: Director's Special Colloquium Start Date: Nov 22 2013 - 10:00am Building/Room: Building 402/Auditorium Location: Argonne National Laboratory Speaker(s): Arun Majumdar Speaker(s) Title: Google As we work to develop clean, sustainable and innovative approaches to our nation's greatest energy challenges, Argonne researchers are constantly seeking new insights into the future of the global energy economy. The laboratory is pleased to welcome Director's Special Colloquium speaker Arun Majumdar, who will give a presentation on "Energy & the Industrial Revolution: Past, Present & Future." Dr. Majumdar, a recognized leader in energy innovation, drives energy initiatives at Google.org (the company's charitable arm) and advises the

383

Oil & Natural Gas Technology DOE Award No.: DE-FC26-01NT41330  

NLE Websites -- All DOE Office Websites (Extended Search)

occurring gas hydrates can cause problems relating to drilling and production of oil and gas, as well as building and operating pipelines. Other objectives of this project...

384

Final Report on Testing of Off-Gas Treatment Technologies for Abatement of Atmospheric Emissions of Chlorinated Volatile Organic Compounds  

SciTech Connect

The purpose of this report is to summarize the results of the program for off-gas treatment of atmospheric emissions of chlorinated volatile organic compounds (CVOCs), in particular trichloroethylene (TCE) and perchloroethylene (PCE). This program was funded through the Department of Energy Office of Technology Development`s VOC`s in Non-Arid Soils Integrated Demonstration (VNID). The off-gas treatment program was initiated after testing of in-situ air stripping with horizontal wells was completed (Looney et al., 1991). That successful test expectedly produced atmospheric emissions of CVOCs that were unabated. It was decided after that test that an off-gas treatment is an integral portion of remediation of CVOC contamination in groundwater and soil but also because several technologies were being developed across the United States to mitigate CVOC emissions. A single platform for testing off-gas treatment technologies would facilitate cost effective evaluation of the emerging technologies. Another motivation for the program is that many CVOCs will be regulated under the Clean Air Act Amendments of 1990 and are already regulated by many state regulatory programs. Additionally, compounds such as TCE and PCE are pervasive subsurface environmental contaminants, and, as a result, a small improvement in terms of abatement efficiency or cost will significantly reduce CVOC discharges to the environment as well as costs to United States government and industry.

Jarosch, T.R.; Haselow, J.S.; Rossabi, J.; Burdick, S.A.; Raymond, R.; Young, J.E.; Lombard, K.H.

1995-01-23T23:59:59.000Z

385

Pathways to Sustainability: Evolution or Revolution?  

E-Print Network (OSTI)

The purposes of this chapter is to delve more deeply into the processes and determinants of technological, organisational, and social innovation and to discuss their implications for selecting instruments and policies to ...

Ashford, Nicholas

2005-01-01T23:59:59.000Z

386

High-temperature turbine technology program hot-gas path development test. Part II. Testing  

SciTech Connect

This topical report of the US Department of Energy High-Temperature Turbine Technology (DOE-HTTT) Phase II program presents the results of testing full-scale water-cooled first-stage and second-stage turbine nozzles at design temperature and pressure to verify that the designs are adequate for operation in a full-scale turbine environment. Low-cycle fatigue life of the nozzles was demonstrated by subjecting cascade assemblies to several hundred simulated startup/shutdown turbine cycles. This testing was accomplished in the Hot-Gas Path Development Test Stand (HGPDTS), which is capable of evaluating full-scale combustion and turbine nozzle components. A three-throat cascade of the first-stage turbine nozzle was successfully tested at a nozzle inlet gas temperature of 2630/sup 0/F and a nozzle inlet pressure of 11.3 atmospheres. In addition to steady-state operation at the design firing temperature, the nozzle cascade was exposed to a simulated startup/shutdown turbine cycle by varying the firing temperature. A total of 42 h at the design point and 617 thermal cycles were accumulated during the test periods. First-stage nozzle test results show that measured metal and coolant temperatures correspond well to the predicted design values. This nozzle design has been shown to be fully satisfactory for the application (2600/sup 0/F), with growth capability to 3000/sup 0/F firing temperature. A post-test metallurgical examination of sectioned portions of the tested nozzles shows a totally bonded structure, confirming the test results and attesting to the successful performance of water-cooled composite nozzle hardware.

Horner, M.W.

1982-03-01T23:59:59.000Z

387

LOW-ENGINE-FRICTION TECHNOLOGY FOR ADVANCED NATURAL-GAS RECIPROCATING ENGINES  

Science Conference Proceedings (OSTI)

This program aims at improving the efficiency of advanced natural-gas reciprocating engines (ANGRE) by reducing piston/ring assembly friction without major adverse effects on engine performance, such as increased oil consumption and emissions. An iterative process of simulation, experimentation and analysis, are being followed towards achieving the goal of demonstrating a complete optimized low-friction engine system. To date, a detailed set of piston/ring dynamic and friction models have been developed and applied that illustrated the fundamental relationships between design parameters and friction losses. Various low-friction strategies and ring-design concepts have been explored, and engine experiments have been done on a full-scale Waukesha VGF F18 in-line 6 cylinder power generation engine rated at 370 kW at 1800 rpm. Current accomplishments include designing and testing ring-packs using a subtle top-compression-ring profile (skewed barrel design), lowering the tension of the oil-control ring, employing a negative twist to the scraper ring to control oil consumption. Initial test data indicate that piston ring-pack friction was reduced by 35% by lowering the oil-control ring tension alone, which corresponds to a 1.5% improvement in fuel efficiency. Although small in magnitude, this improvement represents a first step towards anticipated aggregate improvements from other strategies. Other ring-pack design strategies to lower friction have been identified, including reduced axial distance between the top two rings, tilted top-ring groove. Some of these configurations have been tested and some await further evaluation. Colorado State University performed the tests and Waukesha Engine Dresser, Inc. provided technical support. Key elements of the continuing work include optimizing the engine piston design, application of surface and material developments in conjunction with improved lubricant properties, system modeling and analysis, and continued technology demonstration in an actual full-sized reciprocating natural-gas engine.

Victor W. Wong; Tian Tian; Grant Smedley; Jeffrey Jocsak

2004-09-30T23:59:59.000Z

388

IMPROVED TUBULARS FOR BETTER ECONOMICS IN DEEP GAS WELL DRILLING USING MICROWAVE TECHNOLOGY  

Science Conference Proceedings (OSTI)

The main objective of the research program has been to improve the rate-of-penetration in deep hostile environments by improving the life cycle and performance of coiled-tubing, an important component of a deep well drilling system for oil and gas exploration, by utilizing the latest developments in the microwave materials technology. Originally, it was proposed to accomplish this by developing an efficient and economically viable continuous microwave process to sinter continuously formed/extruded steel powder for the manufacture of seamless coiled tubing and other tubular products. However, based on the results and faced with insurmountable difficulties in the extrusion and de-waxing processes, the approach of achieving the goals of the program has been slightly changed. In the continuation proposal an approach of microwave sintering combined with Cold Isostatic Press (CIP) and joining (by induction or microwave) is adopted. This process can be developed into a semi-continuous sintering process if the CIP can produce parts fast enough to match the microwave sintering rates. Originally, the entire program was spread over three phases with the following goals: Phase I: Demonstration of the feasibility concept of continuous microwave sintering process for tubular steel products. Phase II: Design, building and testing of a prototype microwave system which shall be combined with a continuous extruder for steel tubular objects. Phase III: Execution of the plan for commercialization of the technology by one of the industrial partners. However, since some of the goals of the phase I were not completed, an extension of nine months was granted and we continued extrusion experiments, designed and built semicontinuous microwave sintering unit.

Dinesh Agrawal; Paul Gigl; Mahlon Dennis; Roderic Stanley

2005-03-01T23:59:59.000Z

389

Health and environmental effects of oil and gas technologies: research needs  

Science Conference Proceedings (OSTI)

This report discusses health and environmental issues associated with oil and gas technologies as they are currently perceived - both those that exist and those that are expected to emerge over the next two decades. The various sections of this report contain discussions of specific problem areas and relevant new research activities which should be pursued. This is not an exhaustive investigation of all problem areas, but the report explores a wide range of issues to provide a comprehensive picture of existing uncertainties, trends, and other factors that should serve as the focus of future research. The problem areas of major concern include: effects of drilling fluids, offshore accidents, refineries and worker health, and biota and petroleum spills, indoor air pollution, information transfer, and unconventional resources. These are highlighted in the Executive Summary because they pose serious threats to human health and the environment, and because of the sparcity of accumulated knowledge related to their definition. Separate abstracts have been prepared for selected sections of this report for inclusion in the Energy Data Base. (DMC)

Brown, R. D.

1981-07-01T23:59:59.000Z

390

Application of coiled-tubing-drilling technology on a deep underpressured gas reservoir  

Science Conference Proceedings (OSTI)

The Upper-Mississippian Elkton formation is a dolomitized shallow-water carbonate consisting of dense limestones and porous dolomites. The Elkton was deposited in an open-shelf environment as crinoid grainstones, coral packstones, and lime muds. Deposition of impermeable shales and siltstones of the Lower Cretaceous created the lateral and updip seals. Reservoir thickness can be up to 20 m, with porosities reaching 20% and averaging 10%. The reservoir gas contains approximately 0.5% hydrogen sulfide. Well 11-18 was to be completed in the Harmatten Elkton pool. The pool went on production in 1967 at an initial pressure of 23,500 kPa. At the current pressure of 16,800 kPa, the remaining reserves are underpressured at 6.5 kPa/m, and underbalanced horizontal drilling was selected as the most suitable technique for exploiting remaining reserves. Coiled-tubing (CT) technology was selected to ensure continuous underbalanced conditions and maintain proper well control while drilling. The paper describes the equipment, CT drilling summary, and drilling issues.

NONE

1997-06-01T23:59:59.000Z

391

Improved Tubulars for Better Economics in Deep Gas Well Drilling Using Microwave Technology  

Science Conference Proceedings (OSTI)

The main objective of the entire research program has been to improve the rate-of-penetration in deep hostile environments by improving the life cycle and performance of coiled-tubing, an important component of a deep well drilling system for oil and gas exploration, by utilizing the latest developments in the microwave materials technology. Based on the results of the Phase I and insurmountable difficulties faced in the extrusion and de-waxing processes, the approach of achieving the goals of the program was slightly changed in the Phase II in which an approach of microwave sintering combined with Cold Isostatic Press (CIP) and joining (by induction or microwave) has been adopted. This process can be developed into a semicontinuous sintering process if the CIP can produce parts fast enough to match the microwave sintering rates. The main objective of the Phase II research program is to demonstrate the potential to economically manufacture microwave processed coiled tubing with improved performance for extended useful life under hostile coiled tubing drilling conditions. After the completion of the Phase II, it is concluded that scale up and sintering of a thin wall common O.D. size tubing that is widely used in the market is still to be proved and further experimentation and refinement of the sintering process is needed in Phase III. Actual manufacturing capability of microwave sintered, industrial quality, full length tubing will most likely require several million dollars of investment.

Dinesh Agrawal

2006-09-30T23:59:59.000Z

392

Improved Tubulars for Better Economics in Deep Gas Well Drilling using Microwave Technology  

Science Conference Proceedings (OSTI)

The main objective of the entire research program has been to improve the rate-of-penetration in deep hostile environments by improving the life cycle and performance of coiled-tubing, an important component of a deep well drilling system for oil and gas exploration, by utilizing the latest developments in the microwave materials technology. Based on the results of the Phase I and insurmountable difficulties faced in the extrusion and de-waxing processes, the approach of achieving the goals of the program was slightly changed in the Phase II in which an approach of microwave sintering combined with Cold Isostatic Press (CIP) and joining (by induction or microwave) has been adopted. This process can be developed into a semicontinuous sintering process if the CIP can produce parts fast enough to match the microwave sintering rates. The main objective of the Phase II research program is to demonstrate the potential to economically manufacture microwave processed coiled tubing with improved performance for extended useful life under hostile coiled tubing drilling conditions. After the completion of the Phase II, it is concluded that scale up and sintering of a thin wall common O.D. size tubing that is widely used in the market is still to be proved and further experimentation and refinement of the sintering process is needed in Phase III. Actual manufacturing capability of microwave sintered, industrial quality, full length tubing will most likely require several million dollars of investment.

Dinesh Agrawal; Paul Gigl; Mark Hunt; Mahlon Dennis

2007-07-31T23:59:59.000Z

393

The development of coke smelting and the industrial revolution  

E-Print Network (OSTI)

Abraham Darby and the origins of the industrial revolution in Britain. Alan Macfarlane talks to John about the reasons for the area near Birmingham becoming the epi-centre of the industrial development, and the development of coke furnaces and iron...

Macfarlane, Alan

2004-08-05T23:59:59.000Z

394

Integrated Warm Gas Multicontaminant Cleanup Technologies for Coal-Derived Syngas  

SciTech Connect

One of the key obstacles for the introduction of commercial gasification technology for the production of power with Integrated Gasification Combined Cycle (IGCC) plants or the production of value added chemicals, transportation fuels, and hydrogen has been the cost of these systems. This situation is particularly challenging because the United States has ample coal resources available as raw materials and effective use of these raw materials could help us meet our energy and transportation fuel needs while significantly reducing our need to import oil. One component of the cost of these systems that faces strong challenges for continuous improvement is removing the undesirable components present in the syngas. The need to limit the increase in cost of electricity to < 35% for new coal-based power plants which include CO{sub 2} capture and sequestration addresses both the growing social concern for global climate change resulting from the emission of greenhouse gas and in particular CO{sub 2} and the need to control cost increases to power production necessary to meet this social objective. Similar improvements to technologies for trace contaminants are getting similar pressure to reduce environmental emissions and reduce production costs for the syngas to enable production of chemicals from coal that is cost competitive with oil and natural gas. RTI, with DOE/NETL support, has been developing sorbent technologies that enable capture of trace contaminants and CO{sub 2} at temperatures above 400 °F that achieve better capture performance, lower costs and higher thermal efficiency. This report describes the specific work of sorbent development for mercury (Hg), arsenic (As), selenium (Se), cadmium (Cd), and phosphorous (P) and CO{sub 2} removal. Because the typical concentrations of Hg, As, Se, Cd, and P are less than 10 ppmv, the focus has been on single-use sorbents with sufficient capacity to ensure replacement costs are cost effective. The research in this report describes the development efforts which expand this sorbent development effort to include Se, Cd, and P as well as Hg and As. Additional research has focused on improving removal performance with the goal of achieving effluent concentrations that are suitable for chemical production applications. By contrast, sorbent development for CO{sub 2} capture has focused on regenerable sorbents that capture the CO{sub 2} byproduct at higher CO{sub 2} pressures. Previous research on CO{sub 2} sorbents has demonstrated that the most challenging aspect of developing CO{sub 2} sorbents is regeneration. The research documented in this report investigates options to improve regeneration of the CO{sub 2} capture sorbents. This research includes effort on addressing existing regeneration limitations for sorbents previously developed and new approaches that focus initially on the regeneration performance of the sorbent.

Turk, Brian; Gupta, Raghubir; Sharma, Pradeepkumar; Albritton, Johnny; Jamal, Aqil

2010-09-30T23:59:59.000Z

395

Energy and greenhouse gas emission effects of corn and cellulosic ethanol with technology improvements and land use changes.  

Science Conference Proceedings (OSTI)

Use of ethanol as a transportation fuel in the United States has grown from 76 dam{sup 3} in 1980 to over 40.1 hm{sup 3} in 2009 - and virtually all of it has been produced from corn. It has been debated whether using corn ethanol results in any energy and greenhouse gas benefits. This issue has been especially critical in the past several years, when indirect effects, such as indirect land use changes, associated with U.S. corn ethanol production are considered in evaluation. In the past three years, modeling of direct and indirect land use changes related to the production of corn ethanol has advanced significantly. Meanwhile, technology improvements in key stages of the ethanol life cycle (such as corn farming and ethanol production) have been made. With updated simulation results of direct and indirect land use changes and observed technology improvements in the past several years, we conducted a life-cycle analysis of ethanol and show that at present and in the near future, using corn ethanol reduces greenhouse gas emission by more than 20%, relative to those of petroleum gasoline. On the other hand, second-generation ethanol could achieve much higher reductions in greenhouse gas emissions. In a broader sense, sound evaluation of U.S. biofuel policies should account for both unanticipated consequences and technology potentials. We maintain that the usefulness of such evaluations is to provide insight into how to prevent unanticipated consequences and how to promote efficient technologies with policy intervention.

Wang, M.; Han, J.; Haq, Z; Tyner, .W.; Wu, M.; Elgowainy, A. (Energy Systems)

2011-05-01T23:59:59.000Z

396

Technology Adoption and Regulatory Regimes: Gas Turbines Electricity Generators from 1980 to 2001  

E-Print Network (OSTI)

of U.S. regulation and high natural gas prices. The returnregulation (PIFUA), motivated by foreign policy concerns surrounding the Oil Crisis, severely limited the use of natural gas

Ishii, Jun

2004-01-01T23:59:59.000Z

397

X-ray analysis can improve recovery of oil and natural gas |...  

NLE Websites -- All DOE Office Websites (Extended Search)

and gas industries are undergoing a revolution that has opened up previously inaccessible resources trapped in shale and tight play formations. Oil and GasFact SheetJanuary 2013...

398

IEA-Renewable Energy Technologies, Bioenergy Agreement Task 37: Energy from Biogas and Landfill Gas  

E-Print Network (OSTI)

and Landfill Gas Teknologiområde: Anvendt forskning og udvikling, herunder viden formidling, -udveksling og-Bioenergy, Task 37- Energy from Biogas and Landfill Gas", via samarbejde, informationsudveksling, fælles analyser and landfill gas. I dette tidsinterval er en række aktiviteter blevet gennemført, herunder deltagelse til task

399

OPTIMIZING TECHNOLOGY TO REDUCE MERCURY AND ACID GAS EMISSIONS FROM ELECTRIC POWER PLANTS  

DOE Green Energy (OSTI)

Maps showing potential mercury, sulfur, chlorine, and moisture emissions for U.S. coal by county of origin were made from publicly available data (plates 1, 2, 3, and 4). Published equations that predict mercury capture by emission control technologies used at U.S. coal-fired utilities were applied to average coal quality values for 169 U.S. counties. The results were used to create five maps that show the influence of coal origin on mercury emissions from utility units with: (1) hot-side electrostatic precipitator (hESP), (2) cold-side electrostatic precipitator (cESP), (3) hot-side electrostatic precipitator with wet flue gas desulfurization (hESP/FGD), (4) cold-side electrostatic precipitator with wet flue gas desulfurization (cESP/FGD), and (5) spray-dry adsorption with fabric filter (SDA/FF) emission controls (plates 5, 6, 7, 8, and 9). Net (lower) coal heating values were calculated from measured coal Btu values, and estimated coal moisture and hydrogen values; the net heating values were used to derive mercury emission rates on an electric output basis (plate 10). Results indicate that selection of low-mercury coal is a good mercury control option for plants having hESP, cESP, or hESP/FGD emission controls. Chlorine content is more important for plants having cESP/FGD or SDA/FF controls; optimum mercury capture is indicated where chlorine is between 500 and 1000 ppm. Selection of low-sulfur coal should improve mercury capture where carbon in fly ash is used to reduce mercury emissions. Comparison of in-ground coal quality with the quality of commercially mined coal indicates that existing coal mining and coal washing practice results in a 25% reduction of mercury in U.S. coal before it is delivered to the power plant. Further pre-combustion mercury reductions may be possible, especially for coal from Texas, Ohio, parts of Pennsylvania and much of the western U.S.

Jeffrey C. Quick; David E. Tabet; Sharon Wakefield; Roger L. Bon

2005-10-01T23:59:59.000Z

400

Integrated Warm Gas Multicontaminant Cleanup Technologies for Coal-Derived Syngas  

Science Conference Proceedings (OSTI)

One of the key obstacles for the introduction of commercial gasification technology for the production of power with Integrated Gasification Combined Cycle (IGCC) plants or the production of value added chemicals, transportation fuels, and hydrogen has been the cost of these systems. This situation is particularly challenging because the United States has ample coal resources available as raw materials and effective use of these raw materials could help us meet our energy and transportation fuel needs while significantly reducing our need to import oil. One component of the cost of these systems that faces strong challenges for continuous improvement is removing the undesirable components present in the syngas. The need to limit the increase in cost of electricity to oil and natural gas. RTI, with DOE/NETL support, has been developing sorbent technologies that enable capture of trace contaminants and CO{sub 2} at temperatures above 400 °F that achieve better capture performance, lower costs and higher thermal efficiency. This report describes the specific work of sorbent development for mercury (Hg), arsenic (As), selenium (Se), cadmium (Cd), and phosphorous (P) and CO{sub 2} removal. Because the typical concentrations of Hg, As, Se, Cd, and P are less than 10 ppmv, the focus has been on single-use sorbents with sufficient capacity to ensure replacement costs are cost effective. The research in this report describes the development efforts which expand this sorbent development effort to include Se, Cd, and P as well as Hg and As. Additional research has focused on improving removal performance with the goal of achieving effluent concentrations that are suitable for chemical production applications. By contrast, sorbent development for CO{sub 2} capture has focused on regenerable sorbents that capture the CO{sub 2} byproduct at higher CO{sub 2} pressures. Previous research on CO{sub 2} sorbents has demonstrated that the most challenging aspect of developing CO{sub 2} sorbents is regeneration. The research documented in this report investigates options to improve regeneration of the CO{sub 2} capture sorbents. This research includes effort on addressing existing regeneration limitations for sorbents previously developed and new approaches that focus initially on the regeneration performance of the sorbent.

Turk, Brian; Gupta, Raghubir; Sharma, Pradeepkumar; Albritton, Johnny; Jamal, Aqil

2010-09-30T23:59:59.000Z

Note: This page contains sample records for the topic "gas revolution technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Greenhouse Emission Reductions and Natural Gas Vehicles: A Resource Guide on Technology Options and Project Development  

Science Conference Proceedings (OSTI)

Accurate and verifiable emission reductions are a function of the degree of transparency and stringency of the protocols employed in documenting project- or program-associated emissions reductions. The purpose of this guide is to provide a background for law and policy makers, urban planners, and project developers working with the many Greenhouse Gas (GHG) emission reduction programs throughout the world to quantify and/or evaluate the GHG impacts of Natural Gas Vehicle (NGVs). In order to evaluate the GHG benefits and/or penalties of NGV projects, it is necessary to first gain a fundamental understanding of the technology employed and the operating characteristics of these vehicles, especially with regard to the manner in which they compare to similar conventional gasoline or diesel vehicles. Therefore, the first two sections of this paper explain the basic technology and functionality of NGVs, but focus on evaluating the models that are currently on the market with their similar conventional counterparts, including characteristics such as cost, performance, efficiency, environmental attributes, and range. Since the increased use of NGVs, along with Alternative Fuel Vehicle (AFVs) in general, represents a public good with many social benefits at the local, national, and global levels, NGVs often receive significant attention in the form of legislative and programmatic support. Some states mandate the use of NGVs, while others provide financial incentives to promote their procurement and use. Furthermore, Federal legislation in the form of tax incentives or procurement requirements can have a significant impact on the NGV market. In order to implement effective legislation or programs, it is vital to have an understanding of the different programs and activities that already exist so that a new project focusing on GHG emission reduction can successfully interact with and build on the experience and lessons learned of those that preceded it. Finally, most programs that deal with passenger vehicles--and with transportation in general--do not address the climate change component explicitly, and thus there are few GHG reduction goals that are included in these programs. Furthermore, there are relatively few protocols that exist for accounting for the GHG emissions reductions that arise from transportation and, specifically, passenger vehicle projects and programs. These accounting procedures and principles gain increased importance when a project developer wishes to document in a credible manner, the GHG reductions that are achieved by a given project or program. Section four of this paper outlined the GHG emissions associated with NGVs, both upstream and downstream, and section five illustrated the methodology, via hypothetical case studies, for measuring these reductions using different types of baselines. Unlike stationary energy combustion, GHG emissions from transportation activities, including NGV projects, come from dispersed sources creating a need for different methodologies for assessing GHG impacts. This resource guide has outlined the necessary context and background for those parties wishing to evaluate projects and develop programs, policies, projects, and legislation aimed at the promotion of NGVs for GHG emission reduction.

Orestes Anastasia; NAncy Checklick; Vivianne Couts; Julie Doherty; Jette Findsen; Laura Gehlin; Josh Radoff

2002-09-01T23:59:59.000Z

402

Toward Production From Gas Hydrates: Current Status, Assessment of Resources, and Simulation-Based Evaluationof Technology and Potential  

SciTech Connect

Gas hydrates are a vast energy resource with global distribution in the permafrost and in the oceans. Even if conservative estimates are considered and only a small fraction is recoverable, the sheer size of the resource is so large that it demands evaluation as a potential energy source. In this review paper, we discuss the distribution of natural gas hydrate accumulations, the status of the primary international R&D programs, and the remaining science and technological challenges facing commercialization of production. After a brief examination of gas hydrate accumulations that are well characterized and appear to be models for future development and gas production, we analyze the role of numerical simulation in the assessment of the hydrate production potential, identify the data needs for reliable predictions, evaluate the status of knowledge with regard to these needs, discuss knowledge gaps and their impact, and reach the conclusion that the numerical simulation capabilities are quite advanced and that the related gaps are either not significant or are being addressed. We review the current body of literature relevant to potential productivity from different types of gas hydrate deposits, and determine that there are consistent indications of a large production potential at high rates over long periods from a wide variety of hydrate deposits. Finally, we identify (a) features, conditions, geology and techniques that are desirable in potential production targets, (b) methods to maximize production, and (c) some of the conditions and characteristics that render certain gas hydrate deposits undesirable for production.

Reagan, Matthew; Moridis, George J.; Collett, Timothy; Boswell, Ray; Kurihara, M.; Reagan, Matthew T.; Koh, Carolyn; Sloan, E. Dendy

2008-02-12T23:59:59.000Z

403

LOW-ENGINE-FRICTION TECHNOLOGY FOR ADVANCED NATURAL-GAS RECIPROCATING ENGINES  

Science Conference Proceedings (OSTI)

This program aims at improving the efficiency of advanced natural-gas reciprocating engines (ANGRE) by reducing piston and piston ring assembly friction without major adverse effects on engine performance, such as increased oil consumption and wear. An iterative process of simulation, experimentation and analysis is being followed towards achieving the goal of demonstrating a complete optimized low-friction engine system. To date, a detailed set of piston and piston-ring dynamic and friction models have been developed and applied that illustrate the fundamental relationships between design parameters and friction losses. Low friction ring designs have already been recommended in a previous phase, with full-scale engine validation partially completed. Current accomplishments include the addition of several additional power cylinder design areas to the overall system analysis. These include analyses of lubricant and cylinder surface finish and a parametric study of piston design. The Waukesha engine was found to be already well optimized in the areas of lubricant, surface skewness and honing cross-hatch angle, where friction reductions of 12% for lubricant, and 5% for surface characteristics, are projected. For the piston, a friction reduction of up to 50% may be possible by controlling waviness alone, while additional friction reductions are expected when other parameters are optimized. A total power cylinder friction reduction of 30-50% is expected, translating to an engine efficiency increase of two percentage points from its current baseline towards the goal of 50% efficiency. Key elements of the continuing work include further analysis and optimization of the engine piston design, in-engine testing of recommended lubricant and surface designs, design iteration and optimization of previously recommended technologies, and full-engine testing of a complete, optimized, low-friction power cylinder system.

Victor Wong; Tian Tian; Luke Moughon; Rosalind Takata; Jeffrey Jocsak

2005-09-30T23:59:59.000Z

404

INAL Office of Fossil Energy Oil & Natural Gas Technology DOE Award No.: DE-FE0010175  

NLE Websites -- All DOE Office Websites (Extended Search)

INAL INAL Office of Fossil Energy Oil & Natural Gas Technology DOE Award No.: DE-FE0010175 Quarterly Research Performance Progress Report (Period ending 06/30/2013) PLANNING OF A MARINE METHANE HYDRATE PRESSURE CORING PROGRAM FOR THE WALKER RIDGE AND GREEN CANYON AREAS OF THE GULF OF MEXICO Project Period (10/1/2012 - 9/30/2013 (suggested 30 March 2014)) Submitted by: Gary D. Humphrey, Project PI Signature Fugro GeoConsulting, Inc DUNS #: 118972301 6100 Hillcroft Houston, TX 77081-1009 e-mail: GHumphrey@Fugro.com Phone number: (713) 369-5600 Prepared for: United States Department of Energy National Energy Technology Laboratory Submission Date: July 31, 2013 Executive Summary This research effort will focus on developing a site characterization program for naturally occurring gas

405

TECHNOLOGIES TO ENHANCE THE OPERATION OF EXISTING NATURAL GAS COMPRESSION INFRASTRUCTURE  

SciTech Connect

This project has documented and demonstrated the feasibility of technologies and operational choices for companies who operate the large installed fleet of integral engine compressors in pipeline service. Continued operations of this fleet is required to meet the projected growth of the U.S. gas market. Applying project results will meet the goals of the DOE-NETL Natural Gas Infrastructure program to enhance integrity, extend life, improve efficiency, and increase capacity, while managing NOx emissions. These benefits will translate into lower cost, more reliable gas transmission, and options for increasing deliverability from the existing infrastructure on high demand days. The power cylinders on large bore slow-speed integral engine/compressors do not in general combust equally. Variations in cylinder pressure between power cylinders occur cycle-to-cycle. These variations affect both individual cylinder performance and unit average performance. The magnitude of the variations in power cylinder combustion is dependent on a variety of parameters, including air/fuel ratio. Large variations in cylinder performance and peak firing pressure can lead to detonation and misfires, both of which can be damaging to the unit. Reducing the variation in combustion pressure, and moving the high and low performing cylinders closer to the mean is the goal of engine balancing. The benefit of improving the state of the engine ''balance'' is a small reduction in heat rate and a significant reduction in both crankshaft strain and emissions. A new method invented during the course of this project is combustion pressure ratio (CPR) balancing. This method is more effective than current methods because it naturally accounts for differences in compression pressure, which results from cylinder-to-cylinder differences in the amount of air flowing through the inlet ports and trapped at port closure. It also helps avoid compensation for low compression pressure by the addition of excess fuel to achieve equalizing peak firing pressure, even if some of the compression pressure differences are attributed to differences in cylinder and piston geometry, clearance, and kinematics. The combination of high-pressure fuel injection and turbocharging should produce better mixing of fuel and air in lean mixtures. Test results documented modest improvements in heat rate and efficiency and significant improvements in emissions. The feasibility of a closed-loop control of waste-gate setting, which will maintain an equivalence ratio set point, has been demonstrated. This capability allows more direct tuning to enhance combustion stability, heat rate, or emissions. The project has documented the strong dependence of heat rate on load. The feasibility of directly measuring power and torque using the GMRC Rod Load Monitor (RLM) has been demonstrated. This capability helps to optimize heat rate while avoiding overload. The crankshaft Strain Data Capture Module (SDCM) has shown the sensitivity to changes in operating conditions and how they influence crankshaft bending strain. The results indicate that: balancing reduces the frequency of high-strain excursions, advanced timing directly increases crankshaft dynamic strain, reduced speed directly reduces strain, and high-pressure fuel injection reduces crankshaft strain slightly. The project demonstrated that when the timing is advanced, the heat rate is reduced, and when the timing is retarded, the heat rate is increased. One reason why timing is not advanced as much as it might be is the potential for detonation on hot days. A low-cost knock detector was demonstrated that allowed active control to use timing to allow the heat rate benefit to be realized safely. High flow resistance losses in the pulsation control systems installed on some compressors have been shown to hurt efficiency of both compressor and engine/compressor system. Improved pulsation control systems have the potential to recover almost 10% of available engine power. Integrity enhancements and reduced component failure probability will enhance aggregate

Anthony J. Smalley; Ralph E. Harris; Gary D. Bourn; Ford A. Phillips; Danny M. Deffenbaugh

2006-05-31T23:59:59.000Z

406

Development of Brazing Technology for Use in High- Temperature Gas Separation Equipment  

DOE Green Energy (OSTI)

The development of high-temperature electrochemical devices such as oxygen and hydrogen separators, fuel gas reformers, solid oxide fuel cells, and chemical sensors is part of a rapidly expanding segment of the solid state technology market. These devices employ an ionic conducting ceramic as the active membrane that establishes the electrochemical potential of the device, either under voltage (i.e. to carry out gas separation) or under chemical gradient (to develop an electrical potential and thereby generate electrical power). Because the device operates under an ionic gradient that develops across the electrolyte, hermiticity across this layer is paramount. That is, not only must this thin ceramic membrane be dense with no interconnected porosity, but it must be connected to the rest of the device, typically constructed from a heat resistant alloy, with a high-temperature, gas-tight seal. A significant engineering challenge in fabricating these devices is how to effectively join the thin electrochemically active membrane to the metallic body of the device such that the resulting seal is hermetic, rugged, and stable during continuous high temperature operation. Active metal brazing is the typical method of joining ceramic and metal engineering components. It employs a braze alloy that contains one or more reactive elements, often titanium, which will chemically reduce the ceramic faying surface and greatly improve its wetting behavior and adherence with the braze. However, recent studies of these brazes for potential use in fabricating high-temperature electrochemical devices revealed problems with interfacial oxidation and subsequent joint failure [1,2]. Specifically, it was found that the introduction of the ceramic electrolyte and/or heat resistant metal substrate dramatically affects the inherent oxidation behavior of the braze, often in a deleterious manner. These conclusions pointed to the need for an oxidation resistant, high-temperature ceramic-to-metal braze and consequently lead to the development of the novel reactive air brazing (RAB) concept. The goal in RAB is to reactively modify one or both oxide faying surfaces with an oxide compound dissolved in a molten noble metal alloy such that the newly formed surface is readily wetted by the remaining liquid filler material. In many respects, this concept is similar to active metal brazing, except that joining can be conducted in air and the final joint will be resistant to oxidation at high temperature. Potentially, there are a number of metal oxide-noble metal systems that can be considered for RAB, including Ag-CuO, Ag-V2O5, and Pt-Nb2O5. Our current interest is in determining whether the Ag-CuO system is suitable for air brazing functional ceramic-to-metal joints such as those needed in practical electrochemical devices. In a series of studies, the wetting behavior of the Ag-CuO braze was investigated with respect to a number of potential hydrogen separation, oxygen separation, and fuel cell electrolyte membrane materials and heat resistant metal systems, including: alumina, (La0.6Sr0.4)(Co0.2Fe0.8)O3, (La0.8Sr0.2)FeO3, YSZ, fecralloy, and Crofer-22APU. Selected findings from these studies as well as from our work on joint strength and durability during high-temperature exposure testing will be discussed.

Weil, K.S.; Hardy, J.S.; Kim, J.Y.

2003-04-23T23:59:59.000Z

407

Reactor User Interface Technology Development Roadmaps for a High Temperature Gas-Cooled Reactor Outlet Temperature of 750 degrees C  

DOE Green Energy (OSTI)

This report evaluates the technology readiness of the interface components that are required to transfer high-temperature heat from a High Temperature Gas-Cooled Reactor (HTGR) to selected industrial applications. This report assumes that the HTGR operates at a reactor outlet temperature of 750C and provides electricity and/or process heat at 700C to conventional process applications, including the production of hydrogen.

Ian Mckirdy

2010-12-01T23:59:59.000Z

408

TECHNOLOGIES TO ENHANCE THE OPERATION OF EXISTING NATURAL GAS COMPRESSION INFRASTRUCTURE - MANIFOLD DESIGN FOR CONTROLLING ENGINE AIR BALANCE  

SciTech Connect

This document provides results and conclusions for Task 15.0--Detailed Analysis of Air Balance & Conceptual Design of Improved Air Manifolds in the ''Technologies to Enhance the Operation of Existing Natural Gas Compression Infrastructure'' project. SwRI{reg_sign} is conducting this project for DOE in conjunction with Pipeline Research Council International, Gas Machinery Research Council, El Paso Pipeline, Cooper Compression, and Southern Star, under DOE contract number DE-FC26-02NT41646. The objective of Task 15.0 was to investigate the perceived imbalance in airflow between power cylinders in two-stroke integral compressor engines and develop solutions via manifold redesign. The overall project objective is to develop and substantiate methods for operating integral engine/compressors in gas pipeline service, which reduce fuel consumption, increase capacity, and enhance mechanical integrity.

Gary D. Bourn; Ford A. Phillips; Ralph E. Harris

2005-12-01T23:59:59.000Z

409

Influence of technological factors on statics of hydrogen sulfide absorption from coke-oven gas by the ammonia process  

SciTech Connect

The basic technological factors that determine the effectiveness of hydrogen sulfide absorption from coke-oven gas by the cyclic ammonia process are the initial H/sub 2/S content of the gas, the degree of purification, the absorption temperature and the NH/sub 3/ and CO/sub 2/ contents of the absorbent solution. The effects of these factors on the statics of hydrogen sulfide absorption are studied. The investigation is based on the phase-equilibrium distributions of components in the absorption-desorption gas-cleaning cycle. The mathematical model is presented which includes the solution of a system of chemical equilibrium equations for reactions in the solution, material balances, and electrical neutrality. 4 references, 5 figures, 1 table.

Nazarov, V.G.; Kamennykh, B.M.; Rus'yanov, N.D.

1983-01-01T23:59:59.000Z

410

BIODESULF(TM), A Novel Biological Technology for the Removal of H2S From Sour Natural Gas  

Science Conference Proceedings (OSTI)

The state-of-the-art technologies for the removal of sulfur compounds from Sour Natural Gas (SNG) are not cost-effective when scaled down to approximately 2-5 MMSCFD. At the same time, the SNG Production is increasing at 3-6 TCF/Yr and -78 TCF potential reserves are also sour. Assuming only 3% treatment of this potential SNG market is for small volume processing, the potential U.S. Market is worth $0.14 to $0.28 billion. Therefore, the Gas Processing Industry is seeking novel, cost-effective, environmentally compatible and operator friendly technologies applicable to the small volume producers in the range of less than 1 MMSCFD to - 5 MMSCFD. A novel biological process, BIODESTJLFTM (patent pending), developed at ARCTECH removes H{sub 2}S and other sulfur contaminants that make the Natural Gas Sour. The removal is accomplished by utilizing an adapted mixed microbial culture (consortium). A variety of anaerobic microbial consortia from ARCTECH`s Microbial Culture Collection were grown and tested for removal of H{sub 2}S. One of these consortia, termed SS-11 was found to be particularly effective. Utilizing the SS-11 consortium, a process has been developed on a laboratory-scale to remove sulfur species from Sour Natural Gas at well head production pressures and temperatures. The process has been independently evaluated and found to be promising in effectively removing H{sub 2}S and other sulfur species cost effectively.

Srivastava, K.C.; Stashick, J.J.; Johnson, P.E.; Kaushik, N.K.

1997-10-01T23:59:59.000Z

411

Case Studies from the Climate Technology Partnership: Landfill Gas Projects in South Korea and Lessons Learned  

Science Conference Proceedings (OSTI)

This paper examines landfill gas projects in South Korea. Two case studies provide concrete examples of lessons learned and offer practical guidance for future projects.

Larney, C.; Heil, M.; Ha, G. A.

2006-12-01T23:59:59.000Z

412

Alternative-fuels technology: Natural gas vehicles as a way to curb urban air pollution  

DOE Green Energy (OSTI)

This report describes the use of natural gas as an alternative fuel in various vehicles. Safety and emissions resulting from combustion are briefly discussed.

NONE

1995-02-01T23:59:59.000Z

413

An Advisory System For Selecting Drilling Technologies and Methods in Tight Gas Reservoirs.  

E-Print Network (OSTI)

??The supply and demand situation is crucial for the oil and gas industry during the first half of the 21st century. For the future, we (more)

Pilisi, Nicolas

2010-01-01T23:59:59.000Z

414

Research projects needed for expediting development of domestic oil and gas resources through arctic, offshore, and drilling technology  

Science Conference Proceedings (OSTI)

This document contains the research projects which were identified at an industry-government workshop on Arctic, Offshore, and Drilling Technology (AODT) held at Bartlesville Energy Technology Center, January 5-7, 1981. The purpose of the workshop was to identify those problem areas where government research could provide technology advancement that would assist industry in accelerating the discovery and development of US oil and gas resouces. The workshop results are to be used to guide an effective research program. The workshop identified and prioritized the tasks that need to be implemented. All of the projects listed in the Arctic and Offshore sections were selected as appropriate for a Department of Energy (DOE) research role. The drilling projects identified as appropriate only for industry research have been separated in the Drilling section of this report.

Canja, S.; Williams, C.R.

1982-04-01T23:59:59.000Z

415

VIDEO: Celebrating Women's Leadership in the Clean Energy Revolution |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

VIDEO: Celebrating Women's Leadership in the Clean Energy VIDEO: Celebrating Women's Leadership in the Clean Energy Revolution VIDEO: Celebrating Women's Leadership in the Clean Energy Revolution September 30, 2013 - 4:29pm Addthis Watch highlights from the 2013 Women in Clean Energy Symposium -- an annual event that is working to build a community of professionals dedicated to advancing the careers and goals of women in clean energy. | Video by Matty Greene, Energy Department. Erin R. Pierce Erin R. Pierce Digital Communications Specialist, Office of Public Affairs Last week we shared a recap of the 2013 Women in Clean Energy Symposium. The event, a key component of the Clean Energy Education & Empowerment initiative (C3E), provides a forum for thought leaders across the clean energy sector to devise innovative solutions to the nation's most

416

The Manycore Revolution and Parallel Software Projects at NERSC  

NLE Websites -- All DOE Office Websites (Extended Search)

The Manycore The Manycore Revolution and Parallel Software The Manycore Revolution and Parallel Software | Tags: Math & Computer Science PGAS.jpg Key Challenges: A new software ecosystem is expected to emerge over the next decade to support changes brought about by manycore and multicore systems. The question is whether languages like Unified Parallel C (UPC), which runs on all of the major DOE Office of Science platforms, can provide the best path forward, lowering the barrier to entry for parallel computing and making parallel machines more attractive as commercial products. Why it Matters: Although MPI is currently the de facto standard for programming supercomputers, partitioned global address space (PGAS) languages offer advantages in both programmability and performance. They

417

Technologies  

Technologies Materials. Aggregate Spray for Air Particulate; Actuators Made From Nanoporous Materials; Ceramic Filters; Energy Absorbing Material; Diode Arrays for ...

418

Technologies  

Science & Technology. Weapons & Complex Integration. News Center. News Center. Around the Lab. Contacts. For Reporters. Livermore Lab Report. ...

419

Technologies  

Technologies Energy. Advanced Carbon Aerogels for Energy Applications; Distributed Automated Demand Response; Electrostatic Generator/Motor; Modular Electromechanical ...

420

Technologies  

Technologies Energy, Utilities, & Power Systems. Advanced Carbon Aerogels for Energy Applications; Distributed Automated Demand Response; Electrostatic Generator/Motor

Note: This page contains sample records for the topic "gas revolution technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Technologies  

Technologies Research Tools. Cell-Free Assembly of NanoLipoprotein Particles; Chemical Prism; Lawrence Livermore Microbial Detection Array (LLMDA) ...

422

Author's copy. Final version published by Elsevier in Energy Procedia volume 1 number 1, pages 2809-2816, February 2009. Proceedings of the 9th International Conference on Greenhouse Gas Control Technologies (GHGT-  

E-Print Network (OSTI)

-2816, February 2009. Proceedings of the 9th International Conference on Greenhouse Gas Control Technologies (GHGT in "Greenhouse Gas Control Technologies 9, Proceedings of the 9th International Conference on Greenhouse Gas shortterm and long term risk assessments, descriptions of gas transport and injection technical solutions

Paris-Sud XI, Université de

423

Field Test of Manufactured Gas Plant Remediation Technologies: Material Removal and Handling  

Science Conference Proceedings (OSTI)

Common manufactured gas plant (MGP) site structures are often sources of contamination and present a number of unique material removal and handling challenges. This report provides results from a field-scale study involving the excavation of the contents of a subgrade gas holder tank. Specifically discussed are the material handling activities needed to prepare MGP impacted soils and debris for remediation processes.

1996-02-02T23:59:59.000Z

424

A revolution in micropower : the catalytic nanodiode.  

DOE Green Energy (OSTI)

Our ability to field useful, nano-enabled microsystems that capitalize on recent advances in sensor technology is severely limited by the energy density of available power sources. The catalytic nanodiode (reported by Somorjai's group at Berkeley in 2005) was potentially an alternative revolutionary source of micropower. Their first reports claimed that a sizable fraction of the chemical energy may be harvested via hot electrons (a 'chemicurrent') that are created by the catalytic chemical reaction. We fabricated and tested Pt/GaN nanodiodes, which eventually produced currents up to several microamps. Our best reaction yields (electrons/CO{sub 2}) were on the order of 10{sup -3}; well below the 75% values first reported by Somorjai (we note they have also been unable to reproduce their early results). Over the course of this Project we have determined that the whole concept of 'chemicurrent', in fact, may be an illusion. Our results conclusively demonstrate that the current measured from our nanodiodes is derived from a thermoelectric voltage; we have found no credible evidence for true chemicurrent. Unfortunately this means that the catalytic nanodiode has no future as a micropower source.

Cross, Karen Charlene; Heller, Edwin J.; Figiel, Jeffrey James; Coker, Eric Nicholas; Creighton, James Randall; Koleske, Daniel David; Bogart, Katherine Huderle Andersen; Coltrin, Michael Elliott; Pawlowski, Roger Patrick; Baucom, Kevin C.

2010-11-01T23:59:59.000Z