Powered by Deep Web Technologies
Note: This page contains sample records for the topic "gas processors associa" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Closed-cycle gas turbine chemical processor  

SciTech Connect

A closed-cycle gas turbine chemical processor separates the functions of combustion air and dilution fluid in a gas turbine combustor. The output of the turbine stage of the gas turbine is cooled and recirculated to its compressor from where a proportion is fed to a dilution portion of its combustor and the remainder is fed to a chemical recovery system wherein at least carbon dioxide is recovered therefrom. Fuel and combustion air are fed to a combustion portion of the gas turbine combustor. In a preferred embodiment of the invention, the gas turbine is employed to drive an electric generator. A heat recovery steam generator and a steam turbine may be provided to recover additional energy from the gas turbine exhaust. The steam turbine may be employed to also drive the electric generator. additional heat may be added to the heat recovery steam generator for enhancing the electricity generated using heat recovery combustors in which the functions of combustion and dilution are separated. The chemical recovery system may employ process steam tapped from an intermediate stage of the steam turbine for stripping carbon dioxide from an absorbent liquid medium which is used to separate it from the gas stream fed to it. As the amount of carbon dioxide in the fuel fed to the chemical processor increases, the amount of process steam required to separate it from the absorbent fluid medium increases and the contribution to generated electricity by the steam turbine correspondingly decreases.

Stahl, C. R.

1985-07-16T23:59:59.000Z

2

A natural-gas fuel processor for a residential fuel cell system.  

Science Conference Proceedings (OSTI)

A system model was used to develop an autothermal reforming fuel processor to meet the targets of 80% efficiency (higher heating value) and start-up energy consumption of less than 500 kJ when operated as part of a 1-kWe natural-gas fueled fuel cell system for cogeneration of heat and power. The key catalytic reactors of the fuel processor--namely the autothermal reformer, a two-stage water gas shift reactor and a preferential oxidation reactor--were configured and tested in a breadboard apparatus. Experimental results demonstrated a reformate containing {approx} 48% hydrogen (on a dry basis and with pure methane as fuel) and less than 5 ppm CO. The effects of steam-to-carbon and part load operations were explored.

Adachi, H.; Ahmed, S.; Lee, S. H. D.; Papadias, D.; Ahluwalia, R. K.; Bendert, J. C.; Kanner, S. A.; Yamazaki, Y.; Japan Institute of Energy

2009-03-01T23:59:59.000Z

3

Integrated fuel processor development.  

DOE Green Energy (OSTI)

The Department of Energy's Office of Advanced Automotive Technologies has been supporting the development of fuel-flexible fuel processors at Argonne National Laboratory. These fuel processors will enable fuel cell vehicles to operate on fuels available through the existing infrastructure. The constraints of on-board space and weight require that these fuel processors be designed to be compact and lightweight, while meeting the performance targets for efficiency and gas quality needed for the fuel cell. This paper discusses the performance of a prototype fuel processor that has been designed and fabricated to operate with liquid fuels, such as gasoline, ethanol, methanol, etc. Rated for a capacity of 10 kWe (one-fifth of that needed for a car), the prototype fuel processor integrates the unit operations (vaporization, heat exchange, etc.) and processes (reforming, water-gas shift, preferential oxidation reactions, etc.) necessary to produce the hydrogen-rich gas (reformate) that will fuel the polymer electrolyte fuel cell stacks. The fuel processor work is being complemented by analytical and fundamental research. With the ultimate objective of meeting on-board fuel processor goals, these studies include: modeling fuel cell systems to identify design and operating features; evaluating alternative fuel processing options; and developing appropriate catalysts and materials. Issues and outstanding challenges that need to be overcome in order to develop practical, on-board devices are discussed.

Ahmed, S.; Pereira, C.; Lee, S. H. D.; Krumpelt, M.

2001-12-04T23:59:59.000Z

4

Reduces a processor's energy consumption  

E-Print Network (OSTI)

). Clearly, this is energy inefficient and wasteful of energy. 2 More precisely, the faster that a processor decide that energy is being wasted and will decrease the frequency/voltage level. Translation: LowerReduces a processor's energy consumption by up to 70% Diminishes greenhouse gas emissions Improves

5

Gas processors wary of forecasts--warier still of regulatory snarls  

SciTech Connect

The past year in the gas processing industry has demonstrated the futility of forecasts and the hazards of governmental interference in the market system. By year-end, many of the key assumptions on which earlier forecasts of propane shortage were based had come unravelled: the usual crop-drying market failed to materialize, a mild winter reduced heating demands, conservation measures further reduced demand, and consumers balked at the price increases that were made possible and perhaps even necessary by rulings from the Cost of Living Council. The most recent authoritative study (that by the Federal Energy Office) of short-range propane supply--demand says, in effect, that the record propane inventories now in storage will make the difference between shortage and adequacy during 1974, and possibly through 1975, depending on the weather and whether conservation measures are continued. Though the study is an excellent appraisal of the possible and even the probable if all its assumptions are valid, it should be referenced with due regard for its assumptions, the vagaries of the weather, and particularly the further disrupting effects of governmental actions. One deterrent to a free-market resolution of supply problems is an amendmentto the Federal Energy Administration Act of 1974 which singles out propane for price controls, possibly fostering a rigidity that cannot respond to changing market conditions and is likely to decrease supplies. Of all gas liquids, only ethane is projected to continue significant increases in production. The growth of gas processing and the maintenance of U.S. LP-gas markets depend on the rapid development of the international industry.

Cannon, R.E.

1974-07-08T23:59:59.000Z

6

Integrated fuel processor development challenges.  

DOE Green Energy (OSTI)

In the absence of a hydrogen-refueling infrastructure, the success of the fuel cell system in the market will depend on fuel processors to enable the use of available fuels, such as gasoline, natural gas, etc. The fuel processor includes several catalytic reactors, scrubbers to remove chemical species that can poison downstream catalysts or the fuel cell electrocatalyst, and heat exchangers. Most fuel cell power applications seek compact, lightweight hardware with rapid-start and load- following capabilities. Although packaging can partially address the size and volume, balancing the performance parameters while maintaining the fuel conversion (to hydrogen) efficiency requires careful integration of the unit operations and processes. Argonne National Laboratory has developed integrated fuel processors that are compact and light, and that operate efficiently. This paper discusses some of the difficulties encountered in the development process, focusing on the factors/components that constrain performance, and areas that need further research and development.

Ahmed, S.; Pereira, Lee, S. H. D.; Kaun, T.; Krumpelt, M.

2002-01-09T23:59:59.000Z

7

Cr-free Fe-based metal oxide catalysts for high temperature water gas shift reaction of fuel processor using LPG  

Science Conference Proceedings (OSTI)

The goal of this study was to identify the most suitable chromium-free iron-based catalysts for the HTS (high temperature shift) reaction of a fuel processor using LPG. Hexavalent chromium (Cr6+) in the commercial HTS catalyst has been regarded as hazardous material. We selected Ni and Co as the substitution for chromium in the Fe-based HTS catalyst and investigated the HTS activities of these Crfree catalysts at LPG reformate condition. Cr-free Fe-based catalysts which contain Ni, Zn, or Co instead of Cr were prepared by coprecipitation method and the performance of the catalysts in HTS was evaluated under gas mixture conditions (42% H2, 10% CO, 37% H2O, 8% CO2, and 3% CH4; R (reduction factor): about 1.2) similar to the gases from steam reforming of LPG (100% conversion at steam/carbon ratio = 3), which is higher than R (under 1) of typically studied LNG reformate condition. Among the prepared Cr-free Febased catalysts, the 5 wt%-Co/Fe/20 wt%-Ni and 5 wt%-Zn/Fe/20 wt%-Ni catalysts showed good catalytic activity under this reaction condition simulating LPG reformate gas.

lee, Joon Y.; Lee, Dae-Won; Lee, Kwan Young; Wang, Yong

2009-08-15T23:59:59.000Z

8

Processor Description Languages  

Science Conference Proceedings (OSTI)

Efficient design of embedded processors plays a critical role in embedded systems design. Processor description languages and their associated specification, exploration and rapid prototyping methodologies are used to find the best possible design for ... Keywords: Computer Architecture, Computer Science

Prabhat Mishra; Nikil Dutt

2008-05-01T23:59:59.000Z

9

Sandia secure processor : a native Java processor.  

SciTech Connect

The Sandia Secure Processor (SSP) is a new native Java processor that has been specifically designed for embedded applications. The SSP's design is a system composed of a core Java processor that directly executes Java bytecodes, on-chip intelligent IO modules, and a suite of software tools for simulation and compiling executable binary files. The SSP is unique in that it provides a way to control real-time IO modules for embedded applications. The system software for the SSP is a 'class loader' that takes Java .class files (created with your favorite Java compiler), links them together, and compiles a binary. The complete SSP system provides very powerful functionality with very light hardware requirements with the potential to be used in a wide variety of small-system embedded applications. This paper gives a detail description of the Sandia Secure Processor and its unique features.

Wickstrom, Gregory Lloyd; Gale, Jason Carl; Ma, Kwok Kee

2003-08-01T23:59:59.000Z

10

The epsilon dataflow processor  

Science Conference Proceedings (OSTI)

The epsilon dataflow architecture is designed for high speed uniprocessor execution as well as for parallel processing. The epsilon architecture directly matches ready operands, thus eliminating the need for associative matching stores. epsilon also supports low cost data fan out and critical sections. A 10 MFLOPS CMOS/TTL processor prototype is running and its performance has been measured with several benchmarks. The prototype processor has demonstrated sustained performance exceeding that of comparable control flow processors running at higher clock rates (three times faster than a 20 MHz transputer and 24 times faster than a Sun on a suite of arithmetic tests, for example). 22 refs., 16 figs.

Grafe, V.G.; Davidson, G.S.; Hoch, J.E.; Holmes, V.P.

1988-01-01T23:59:59.000Z

11

Three dimensional flow processor  

DOE Patents (OSTI)

The 3D-flow processor is a general purpose programmable data stream pipelined device that allows fast data movement in six directions for digital signal processing applications such as identifying objects in a matrix in a programmable form. The 3D-flow processor can be used in one dimensional, two dimensional, and three dimensional topologies capable of sustaining an input data rate of up to 100 million data (or frames) per second in a parallel processing system.

Crosetto, D.B.

1992-01-01T23:59:59.000Z

12

Hardware multiplier processor  

DOE Patents (OSTI)

A hardware processor is disclosed which in the described embodiment is a memory mapped multiplier processor that can operate in parallel with a 16 bit microcomputer. The multiplier processor decodes the address bus to receive specific instructions so that in one access it can write and automatically perform single or double precision multiplication involving a number written to it with or without addition or subtraction with a previously stored number. It can also, on a single read command automatically round and scale a previously stored number. The multiplier processor includes two concatenated 16 bit multiplier registers, two 16 bit concatenated 16 bit multipliers, and four 16 bit product registers connected to an internal 16 bit data bus. A high level address decoder determines when the multiplier processor is being addressed and first and second low level address decoders generate control signals. In addition, certain low order address lines are used to carry uncoded control signals. First and second control circuits coupled to the decoders generate further control signals and generate a plurality of clocking pulse trains in response to the decoded and address control signals.

Pierce, Paul E. (Albuquerque, NM)

1986-01-01T23:59:59.000Z

13

High-pressure coal fuel processor development  

DOE Green Energy (OSTI)

The objective of Subtask 1.1 Engine Feasibility was to conduct research needed to establish the technical feasibility of ignition and stable combustion of directly injected, 3,000 psi, low-Btu gas with glow plug ignition assist at diesel engine compression ratios. This objective was accomplished by designing, fabricating, testing and analyzing the combustion performance of synthesized low-Btu coal gas in a single-cylinder test engine combustion rig located at the Caterpillar Technical Center engine lab in Mossville, Illinois. The objective of Subtask 1.2 Fuel Processor Feasibility was to conduct research needed to establish the technical feasibility of air-blown, fixed-bed, high-pressure coal fuel processing at up to 3,000 psi operating pressure, incorporating in-bed sulfur and particulate capture. This objective was accomplished by designing, fabricating, testing and analyzing the performance of bench-scale processors located at Coal Technology Corporation (subcontractor) facilities in Bristol, Virginia. These two subtasks were carried out at widely separated locations and will be discussed in separate sections of this report. They were, however, independent in that the composition of the synthetic coal gas used to fuel the combustion rig was adjusted to reflect the range of exit gas compositions being produced on the fuel processor rig. Two major conclusions resulted from this task. First, direct injected, ignition assisted Diesel cycle engine combustion systems can be suitably modified to efficiently utilize these low-Btu gas fuels. Second, high pressure gasification of selected run-of-the-mine coals in batch-loaded fuel processors is feasible. These two findings, taken together, significantly reduce the perceived technical risks associated with the further development of the proposed coal gas fueled Diesel cycle power plant concept.

Greenhalgh, M.L.

1992-11-01T23:59:59.000Z

14

Multimode power processor  

DOE Patents (OSTI)

In one embodiment, a power processor which operates in three modes: an inverter mode wherein power is delivered from a battery to an AC power grid or load; a battery charger mode wherein the battery is charged by a generator; and a parallel mode wherein the generator supplies power to the AC power grid or load in parallel with the battery. In the parallel mode, the system adapts to arbitrary non-linear loads. The power processor may operate on a per-phase basis wherein the load may be synthetically transferred from one phase to another by way of a bumpless transfer which causes no interruption of power to the load when transferring energy sources. Voltage transients and frequency transients delivered to the load when switching between the generator and battery sources are minimized, thereby providing an uninterruptible power supply. The power processor may be used as part of a hybrid electrical power source system which may contain, in one embodiment, a photovoltaic array, diesel engine, and battery power sources. 31 figs.

O' Sullivan, G.A.; O' Sullivan, J.A.

1999-07-27T23:59:59.000Z

15

Multimode power processor  

SciTech Connect

In one embodiment, a power processor which operates in three modes: an inverter mode wherein power is delivered from a battery to an AC power grid or load; a battery charger mode wherein the battery is charged by a generator; and a parallel mode wherein the generator supplies power to the AC power grid or load in parallel with the battery. In the parallel mode, the system adapts to arbitrary non-linear loads. The power processor may operate on a per-phase basis wherein the load may be synthetically transferred from one phase to another by way of a bumpless transfer which causes no interruption of power to the load when transferring energy sources. Voltage transients and frequency transients delivered to the load when switching between the generator and battery sources are minimized, thereby providing an uninterruptible power supply. The power processor may be used as part of a hybrid electrical power source system which may contain, in one embodiment, a photovoltaic array, diesel engine, and battery power sources.

O' Sullivan, George A. (Pottersville, NJ); O' Sullivan, Joseph A. (St. Louis, MO)

1999-01-01T23:59:59.000Z

16

Distributed processor allocation for launching applications in a massively connected processors complex  

DOE Patents (OSTI)

A compute processor allocator architecture for allocating compute processors to run applications in a multiple processor computing apparatus is distributed among a subset of processors within the computing apparatus. Each processor of the subset includes a compute processor allocator. The compute processor allocators can share a common database of information pertinent to compute processor allocation. A communication path permits retrieval of information from the database independently of the compute processor allocators.

Pedretti, Kevin (Goleta, CA)

2008-11-18T23:59:59.000Z

17

Logic Simulation Using Graphics Processors.  

E-Print Network (OSTI)

??Logic Simulation is widely used to verify the logical correctness of hardware designs. In this work, we present the implementation of a generic graphics processor… (more)

Perinkulam, Atchuthan S

2007-01-01T23:59:59.000Z

18

Embedded DSP Processor Design: Application Specific Instruction Set Processors  

Science Conference Proceedings (OSTI)

This book provides design methods for Digital Signal Processors and Application Specific Instruction set Processors, based on the author's extensive, industrial design experience. Top-down and bottom-up design methodologies are presented, providing valuable ... Keywords: Circuits, Data Processing, Electricity, Microelectronics

Dake Liu

2008-05-01T23:59:59.000Z

19

High-pressure coal fuel processor development  

DOE Green Energy (OSTI)

Caterpillar shares DOE/METC interest in demonstrating the technology required to displace petroleum-based engine fuels with various forms of low cost coal. Current DOE/METC programs on mild gasification and coal-water-slurries are addressing two approaches to this end. Engine and fuel processor system concept studies by Caterpillar have identified a third, potentially promising, option. This option includes high-pressure fuel processing of run-of-the-mine coal and direct injection of the resulting low-Btu gas stream into an ignition assisted, high compression ratio diesel engine. The compactness and predicted efficiency of the system make it suitable for application to line-haul railroad locomotives. A successful conclusion of the program will enable further component development work and full-scale system demonstrations of this potentially important technology. This paper covers the work on fuel processor rig testing completed in FY92.

Greenhalgh, M.L.; Wen, C.S.; Smith, L.

1992-12-31T23:59:59.000Z

20

High-pressure coal fuel processor development  

DOE Green Energy (OSTI)

Caterpillar shares DOE/METC interest in demonstrating the technology required to displace petroleum-based engine fuels with various forms of low cost coal. Current DOE/METC programs on mild gasification and coal-water-slurries are addressing two approaches to this end. Engine and fuel processor system concept studies by Caterpillar have identified a third, potentially promising, option. This option includes high-pressure fuel processing of run-of-the-mine coal and direct injection of the resulting low-Btu gas stream into an ignition assisted, high compression ratio diesel engine. The compactness and predicted efficiency of the system make it suitable for application to line-haul railroad locomotives. A successful conclusion of the program will enable further component development work and full-scale system demonstrations of this potentially important technology. This paper covers the work on fuel processor rig testing completed in FY92.

Greenhalgh, M.L.; Wen, C.S.; Smith, L.

1992-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "gas processors associa" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Relational joins on graphics processors  

Science Conference Proceedings (OSTI)

We present a novel design and implementation of relational join algorithms for new-generation graphics processing units (GPUs). The most recent GPU features include support for writing to random memory locations, efficient inter-processor communication, ... Keywords: graphics processors, join, parallel processing, primitive, relational database, sort

Bingsheng He; Ke Yang; Rui Fang; Mian Lu; Naga Govindaraju; Qiong Luo; Pedro Sander

2008-06-01T23:59:59.000Z

22

Edison processor information is not uner  

NLE Websites -- All DOE Office Websites (Extended Search)

processor information is no longer under NDA Edison processor information is no longer under NDA September 11, 2013 (0 Comments) Ivy Bridge was announced by Intel on 9102013....

23

High-pressure coal fuel processor development  

DOE Green Energy (OSTI)

Caterpillar shares DOE/METC interest in demonstrating the technology required to displace petroleum-based engine fuels with various forms of low cost coal. Current DOE/METC programs on mild gasification and coal-water-slurries are addressing two approaches to this end. Engine and fuel processor system concept studies by Caterpillar have identified a third, potentially promising, option. This option includes high-pressure fuel processing of run-of-the-mine coal and direct injection of the resulting low-Btu gas stream into an ignition assisted, high compression ratio diesel engine. The compactness and predicted efficiency of the system make it suitable for application to line-haul railroad locomotives. Two overall conclusions resulted from Task 1. First direct injected, ignition assisted Diesel cycle engine combustion systems can be suitably modified to efficiently utilize low-Btu gas fuels. Second, high pressure gasification of selected run-of-the-mine coals in batch-loaded fuel processors is feasible. These two findings, taken together, significantly reduce the perceived technical risk associated with the further development of the proposed coal gas fueled Diesel cycle power plant concept. The significant conclusions from Task 2 were: An engine concept, derived from a Caterpillar 3600 series engine, and a fuel processor concept, based on scaling up a removable-canister configuration from the test rig, appear feasible; and although the results of this concept study are encouraging, further, full-scale component research and development are required before attempting a full-scale integrated system demonstration effort.

Greenhalgh, M.L. (Caterpillar, Inc., Peoria, IL (United States))

1992-12-01T23:59:59.000Z

24

Flexible MIPS soft processor architecture  

E-Print Network (OSTI)

The flexible MIPS soft processor architecture borrows selected technologies from high-performance computing to deliver a modular, highly customizable CPU targeted towards FPGA implementations for embedded systems; the ...

Carli, Roberto

2008-01-01T23:59:59.000Z

25

Flexible MIPS Soft Processor Architecture  

E-Print Network (OSTI)

The flexible MIPS soft processor architecture borrows selected technologies from high-performance computing to deliver a modular, highly customizable CPU targeted towards FPGA implementations for embedded systems; the ...

Carli, Roberto

2008-06-16T23:59:59.000Z

26

Programming reaction-diffusion processors  

Science Conference Proceedings (OSTI)

In reaction-diffusion (RD) processors, both the data and the results of the computation are encoded as concentration profiles of the reagents. The computation is performed via the spreading and interaction of wave fronts. Most prototypes of RD computers ...

Andrew Adamatzky

2004-09-01T23:59:59.000Z

27

Database for LDV Signal Processor Performance Analysis  

Science Conference Proceedings (OSTI)

A comparative and quantitative analysis of various laser velocimeter signal processors is difficult because standards for characterzing signal bursts have not been established. This leaves the researcher to select a signal processor based only on manufacturers'' ...

Baker Glenn D.; Murphy R. Jay; Meyers James F.

1989-09-01T23:59:59.000Z

28

Automotive Fuel Processor Development and Demonstration with Fuel Cell Systems  

DOE Green Energy (OSTI)

The potential for fuel cell systems to improve energy efficiency and reduce emissions over conventional power systems has generated significant interest in fuel cell technologies. While fuel cells are being investigated for use in many applications such as stationary power generation and small portable devices, transportation applications present some unique challenges for fuel cell technology. Due to their lower operating temperature and non-brittle materials, most transportation work is focusing on fuel cells using proton exchange membrane (PEM) technology. Since PEM fuel cells are fueled by hydrogen, major obstacles to their widespread use are the lack of an available hydrogen fueling infrastructure and hydrogen's relatively low energy storage density, which leads to a much lower driving range than conventional vehicles. One potential solution to the hydrogen infrastructure and storage density issues is to convert a conventional fuel such as gasoline into hydrogen onboard the vehicle using a fuel processor. Figure 2 shows that gasoline stores roughly 7 times more energy per volume than pressurized hydrogen gas at 700 bar and 4 times more than liquid hydrogen. If integrated properly, the fuel processor/fuel cell system would also be more efficient than traditional engines and would give a fuel economy benefit while hydrogen storage and distribution issues are being investigated. Widespread implementation of fuel processor/fuel cell systems requires improvements in several aspects of the technology, including size, startup time, transient response time, and cost. In addition, the ability to operate on a number of hydrocarbon fuels that are available through the existing infrastructure is a key enabler for commercializing these systems. In this program, Nuvera Fuel Cells collaborated with the Department of Energy (DOE) to develop efficient, low-emission, multi-fuel processors for transportation applications. Nuvera's focus was on (1) developing fuel processor subsystems (fuel reformer, CO cleanup, and exhaust cleanup) that were small enough to integrate on a vehicle and (2) evaluating the fuel processor system performance for hydrogen production, efficiency, thermal integration, startup, durability and ability to integrate with fuel cells. Nuvera carried out a three-part development program that created multi-fuel (gasoline, ethanol, natural gas) fuel processing systems and investigated integration of fuel cell / fuel processor systems. The targets for the various stages of development were initially based on the goals of the DOE's Partnership for New Generation Vehicles (PNGV) initiative and later on the Freedom Car goals. The three parts are summarized below with the names based on the topic numbers from the original Solicitation for Financial Assistance Award (SFAA).

Nuvera Fuel Cells

2005-04-15T23:59:59.000Z

29

Optimization Online - Processor Speed Control with Thermal ...  

E-Print Network (OSTI)

Sep 29, 2007 ... Processor Speed Control with Thermal Constraints. Almir Mutapcic(almirm ***at** * stanford.edu) Stephen Boyd(boyd ***at*** stanford.edu)

30

Customizable Fuel Processor Technology Benefits Fuel Cell ...  

Customizable Fuel Processor Technology Benefits Fuel Cell Power Industry (ANL-IN-00-030) Argonne National Laboratory. Contact ANL About This ...

31

Geothermal Food Processors Agricultural Drying Low Temperature...  

Open Energy Info (EERE)

Login | Sign Up Search Page Edit with form History Facebook icon Twitter icon Geothermal Food Processors Agricultural Drying Low Temperature Geothermal Facility Jump to:...

32

Prototype Cathode Processor (PCP) - Nuclear Engineering Division...  

NLE Websites -- All DOE Office Websites (Extended Search)

processor has allowed the prototype unit to purify, by distillation, several hundred kilograms of uranium chloride salt produced by the Chemical Sciences and Engineering Division...

33

AN ULTRAFAST FOURIER TRANSFORM PARALLEL PROCESSOR  

E-Print Network (OSTI)

that uses the UFTPP 2-D processor of Filtered Projectionsprojections algorithm are The cited. be Assisted operation.Image Reconstruction from Projections Conclusion REFERENCES

Greenberg, W.L.

2013-01-01T23:59:59.000Z

34

Intelligent Economic Alarm Processor (IEAP)  

E-Print Network (OSTI)

The advent of electricity market deregulation has placed great emphasis on the availability of information, the analysis of this information, and the subsequent decision-making to optimize system operation in a competitive environment. This creates a need for better ways of correlating the market activity with the physical grid operating states in real time and sharing such information among market participants. Choices of command and control actions may result in different financial consequences for market participants and severely impact their profits. This work provides a solution, the Intelligent Economic Alarm Processor to be implemented in a control center to assist the grid operator in rapidly identifying the faulted sections and market operation management. The task of fault section estimation is difficult when multiple faults, failures of protection devices, and false data are involved. A Fuzzy Reasoning Petri-nets approach has been proposed to tackle the complexities. In this approach, the fuzzy reasoning starting from protection system status data and ending with estimation of faulted power system section is formulated by Petri-nets. The reasoning process is implemented by matrix operations. Next, in order to better feed the FRPN model with more accurate inputs, the failure rates of the protections devices are analyzed. A new approach to assess the circuit breaker’s life cycle or deterioration stages using its control circuit data is introduced. Unlike the traditional “mean time” criteria, the deterioration stages have been mathematically defined by setting up the limits of various performance indices. The model can be automatically updated as the new real-time condition-based data become available to assess the CB’s operation performance using probability distributions. The economic alarm processor module is discussed in the end. This processor firstly analyzes the fault severity based on the information retrieved from the fault section estimation module, and gives the changes in the LMPs, total generation cost, congestion revenue etc. with electricity market schedules and trends. Then some suggested restorative actions are given to optimize the overall system benefit. When market participants receive such information in advance, they make estimation about the system operator's restorative action and their competitors' reaction to it.

Guan, Yufan

2013-08-01T23:59:59.000Z

35

Hill-climbing SMT processor resource distribution  

Science Conference Proceedings (OSTI)

The key to high performance in Simultaneous MultiThreaded (SMT) processors lies in optimizing the distribution of shared resources to active threads. Existing resource distribution techniques optimize performance only indirectly. They infer potential ... Keywords: Hill-climbing algorithm, SMT processor, limit study

Seungryul Choi; Donald Yeung

2009-02-01T23:59:59.000Z

36

Adaptive load sharing for network processors  

Science Conference Proceedings (OSTI)

A novel scheme for processing packets in a router is presented that provides load sharing among multiple network processors distributed within the router. It is complemented by a feedback control mechanism designed to prevent processor overload. Incoming ... Keywords: computer networks, feedback control, load balancing, load sharing, packet processing, router architecture

Lukas Kencl; Jean-Yves Le Boudec

2008-04-01T23:59:59.000Z

37

High-pressure coal fuel processor development. Final report  

DOE Green Energy (OSTI)

Caterpillar shares DOE/METC interest in demonstrating the technology required to displace petroleum-based engine fuels with various forms of low cost coal. Current DOE/METC programs on mild gasification and coal-water-slurries are addressing two approaches to this end. Engine and fuel processor system concept studies by Caterpillar have identified a third, potentially promising, option. This option includes high-pressure fuel processing of run-of-the-mine coal and direct injection of the resulting low-Btu gas stream into an ignition assisted, high compression ratio diesel engine. The compactness and predicted efficiency of the system make it suitable for application to line-haul railroad locomotives. Two overall conclusions resulted from Task 1. First direct injected, ignition assisted Diesel cycle engine combustion systems can be suitably modified to efficiently utilize low-Btu gas fuels. Second, high pressure gasification of selected run-of-the-mine coals in batch-loaded fuel processors is feasible. These two findings, taken together, significantly reduce the perceived technical risk associated with the further development of the proposed coal gas fueled Diesel cycle power plant concept. The significant conclusions from Task 2 were: An engine concept, derived from a Caterpillar 3600 series engine, and a fuel processor concept, based on scaling up a removable-canister configuration from the test rig, appear feasible; and although the results of this concept study are encouraging, further, full-scale component research and development are required before attempting a full-scale integrated system demonstration effort.

Greenhalgh, M.L. [Caterpillar, Inc., Peoria, IL (United States)

1992-12-01T23:59:59.000Z

38

NETL: News Release - Data Acquisition Processor Fills Gap for Extreme  

NLE Websites -- All DOE Office Websites (Extended Search)

9, 2010 9, 2010 Data Acquisition Processor Fills Gap for Extreme Down-hole Conditions Honeywell Develops Unique Reprogrammable High Temperature Device Morgantown, WV - Honeywell International, Inc. has developed a Reconfigurable Processor for Data Acquisition (RPDA) - a reprogrammable, multi-functional device that can operate at temperatures up to 250oC (482oF). The system is housed in a rugged package suitable for deep down-hole oil and natural gas logging and measurement-while-drilling (MWD) operations, and permanent wellbore installation applications. The project was funded through a cooperative agreement with the National Energy Technology Laboratory (NETL) under the Office of Fossil Energy's Oil and Natural Gas Program. Deep wells are generally defined as having a true vertical depth (TVD) greater than 15,000 feet, while ultra-deep wells are deeper than 25,000 feet TVD. Potential recoverable natural gas and oil resources from deep formations are significant, and deep wells tend to produce at much higher daily rates than conventional shallower wells.

39

Low-voltage embedded biomedical processor design  

E-Print Network (OSTI)

Advances in mobile electronics are fueling new possibilities in a variety of applications, one of which is ambulatory medical monitoring with body-worn or implanted sensors. Digital processors on such sensors serve to ...

Kwong, Joyce Y. S. (Joyce Yui Si)

2010-01-01T23:59:59.000Z

40

IBM POWER7 multicore server processor  

Science Conference Proceedings (OSTI)

The IBM POWER® processor is the dominant reduced instruction set computing microprocessor in the world today, with a rich history of implementation and innovation over the last 20 years. In this paper, we describe the key features of ...

B. Sinharoy; R. Kalla; W. J. Starke; H. Q. Le; R. Cargnoni; J. A. Van Norstrand; B. J. Ronchetti; J. Stuecheli; J. Leenstra; G. L. Guthrie; D. Q. Nguyen; B. Blaner; C. F. Marino; E. Retter; P. Williams

2011-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "gas processors associa" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Development of an External Fuel Processor for a Solid Oxide Fuel Cell  

DOE Green Energy (OSTI)

A 250 kW External Fuel Processor was developed and tested that will supply the gases needed by a pipeline natural gas fueled, solid oxide fuel cell during all modes of operation. The fuel processor consists of three major subsystems--a desulfurizer to remove fuel sulfur to an acceptable level, a synthesis gas generator to support plant heat-up and low load fuel cell operations, and a start gas generator to supply a non-flammable, reducing gas to the fuel cell during startup and shutdown operations. The desulfurization subsystem uses a selective catalytic sulfur oxidation process that was developed for operation at elevated pressure and removes the fuel sulfur to a total sulfur content of less than 80 ppbv. The synthesis gas generation subsystem uses a waterless, catalytic partial oxidation reactor to produce a hydrogen-rich mixture from the natural gas and air. An operating window was defined that allows carbon-free operation while maintaining catalyst temperatures that will ensure long-life of the reactor. The start gas subsystem generates an oxygen-free, reducing gas from the pipeline natural gas using a low-temperature combustion technique. These physically and thermally integrated subsystems comprise the 250 kW External Fuel Processor. The 250 kW External Fuel Processor was tested at the Rolls-Royce facility in North Canton, Ohio to verify process performance and for comparison with design specifications. A step wise operation of the automatic controls through the startup, normal operation and shutdown sequences allowed the control system to be tuned and verified. A fully automated system was achieved that brings the fuel processor through its startup procedure, and then await commands from the fuel cell generator module for fuel supply and shutdown. The fuel processor performance met all design specifications. The 250 kW External Fuel Processor was shipped to an American Electric Power site where it will be tested with a Rolls-Royce solid oxide fuel cell generator module.

Daniel Birmingham; Crispin Debellis; Mark Perna; Anant Upadhyayula

2008-02-28T23:59:59.000Z

42

Quad County Corn Processors | Open Energy Information  

Open Energy Info (EERE)

Quad County Corn Processors Quad County Corn Processors Jump to: navigation, search Name Quad County Corn Processors Place Galva, Iowa Zip 51020 Product Farmer owned corn processing facility management company. Coordinates 38.38422°, -97.537539° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":38.38422,"lon":-97.537539,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

43

Midwest Grain Processors MGP | Open Energy Information  

Open Energy Info (EERE)

Midwest Grain Processors MGP Midwest Grain Processors MGP Jump to: navigation, search Name Midwest Grain Processors (MGP) Place Lakota, Iowa Zip 50451 Product Iowa-based bioethanol producer using corn as feedstock. Coordinates 48.042535°, -98.335979° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":48.042535,"lon":-98.335979,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

44

Large-scale Nanostructure Simulations from X-ray Scattering Data On Graphics Processor Clusters  

E-Print Network (OSTI)

X-ray Scattering Data On Graphics Processor Clusters Abhinavaccelerators. General purpose graphics processors o?er ?nethe form factors on graphics processors. Form Factor Kernel

Sarje, Abhinav

2012-01-01T23:59:59.000Z

45

Natural gas industry directory  

SciTech Connect

This directory has information on the following: associations and organizations; exploration and production; gas compression; gas processors; gathering and transmission companies; liquefied natural gas; local distribution companies; marketing firms; regulatory agencies; service companies; suppliers and manufacturers; and regional buyer`s guide.

NONE

1999-11-01T23:59:59.000Z

46

On dynamic load balancing on graphics processors  

Science Conference Proceedings (OSTI)

To get maximum performance on the many-core graphics processors it is important to have an even balance of the workload so that all processing units contribute equally to the task at hand. This can be hard to achieve when the cost of a task is not known ...

Daniel Cederman; Philippas Tsigas

2008-06-01T23:59:59.000Z

47

IBM system z10 processor cache subsystem microarchitecture  

Science Conference Proceedings (OSTI)

With the introduction of the high-frequency IBM System z10™ processor design, a new, robust cache hierarchy was needed to enable up to 80 of these processors aggregated into a tightly coupled symmetric multiprocessor (SMP) system to ...

P. Mak; C. R. Walters; G. E. Strait

2009-01-01T23:59:59.000Z

48

Gas  

Science Conference Proceedings (OSTI)

... Implements a gas based on the ideal gas law. It should be noted that this model of gases is niave (from many perspectives). ...

49

High-pressure coal fuel processor development. Task 1, Proof of principle testing  

DOE Green Energy (OSTI)

The objective of Subtask 1.1 Engine Feasibility was to conduct research needed to establish the technical feasibility of ignition and stable combustion of directly injected, 3,000 psi, low-Btu gas with glow plug ignition assist at diesel engine compression ratios. This objective was accomplished by designing, fabricating, testing and analyzing the combustion performance of synthesized low-Btu coal gas in a single-cylinder test engine combustion rig located at the Caterpillar Technical Center engine lab in Mossville, Illinois. The objective of Subtask 1.2 Fuel Processor Feasibility was to conduct research needed to establish the technical feasibility of air-blown, fixed-bed, high-pressure coal fuel processing at up to 3,000 psi operating pressure, incorporating in-bed sulfur and particulate capture. This objective was accomplished by designing, fabricating, testing and analyzing the performance of bench-scale processors located at Coal Technology Corporation (subcontractor) facilities in Bristol, Virginia. These two subtasks were carried out at widely separated locations and will be discussed in separate sections of this report. They were, however, independent in that the composition of the synthetic coal gas used to fuel the combustion rig was adjusted to reflect the range of exit gas compositions being produced on the fuel processor rig. Two major conclusions resulted from this task. First, direct injected, ignition assisted Diesel cycle engine combustion systems can be suitably modified to efficiently utilize these low-Btu gas fuels. Second, high pressure gasification of selected run-of-the-mine coals in batch-loaded fuel processors is feasible. These two findings, taken together, significantly reduce the perceived technical risks associated with the further development of the proposed coal gas fueled Diesel cycle power plant concept.

Greenhalgh, M.L.

1992-11-01T23:59:59.000Z

50

Rethinking custom ISE identification: a new processor-agnostic method  

Science Conference Proceedings (OSTI)

The last decade has witnessed the emergence of the Application Specific Instruction-set Processor (ASIP) as a viable platform for embedded systems. Extensible ASIPs allow the user to augment a base processor with Instruction Set Extensions (ISEs) that ... Keywords: ISE identification, custom processors, maximal cluster

Ajay K. Verma; Philip Brisk; Paolo Ienne

2007-09-01T23:59:59.000Z

51

Summary report : universal fuel processor.  

DOE Green Energy (OSTI)

The United States produces only about 1/3 of the more than 20 million barrels of petroleum that it consumes daily. Oil imports into the country are roughly equivalent to the amount consumed in the transportation sector. Hence the nation in general, and the transportation sector in particular, is vulnerable to supply disruptions and price shocks. The situation is anticipated to worsen as the competition for limited global supplies increases and oil-rich nations become increasingly willing to manipulate the markets for this resource as a means to achieve political ends. The goal of this project was the development and improvement of technologies and the knowledge base necessary to produce and qualify a universal fuel from diverse feedstocks readily available in North America and elsewhere (e.g. petroleum, natural gas, coal, biomass) as a prudent and positive step towards mitigating this vulnerability. Three major focus areas, feedstock transformation, fuel formulation, and fuel characterization, were identified and each was addressed. The specific activities summarized herein were identified in consultation with industry to set the stage for collaboration. Two activities were undertaken in the area of feedstock transformation. The first activity focused on understanding the chemistry and operation of autothermal reforming, with an emphasis on understanding, and therefore preventing, soot formation. The second activity was focused on improving the economics of oxygen production, particularly for smaller operations, by integrating membrane separations with pressure swing adsorption. In the fuel formulation area, the chemistry of converting small molecules readily produced from syngas directly to fuels was examined. Consistent with the advice from industry, this activity avoided working on improving known approaches, giving it an exploratory flavor. Finally, the fuel characterization task focused on providing a direct and quantifiable comparison of diesel fuel and JP-8.

Coker, Eric Nicholas; Rice, Steven F. (Sandia National Laboratories, Livermore, CA); Kemp, Richard Alan; Stewart, Constantine A.; Miller, James Edward; Cornelius, Christopher James; Staiger, Chad Lynn; Pickett, Lyle M. (Sandia National Laboratories, Livermore, CA)

2008-01-01T23:59:59.000Z

52

Deep Trek Re-configurable Processor for Data Acquisition (RPDA)  

Science Conference Proceedings (OSTI)

This report summarizes technical progress achieved during the cooperative research agreement between Honeywell and U.S. Department of Energy to develop a high-temperature Re-configurable Processor for Data Acquisition (RPDA). The RPDA development has incorporated multiple high-temperature (225C) electronic components within a compact co-fired ceramic Multi-Chip-Module (MCM) package. This assembly is suitable for use in down-hole oil and gas applications. The RPDA module is programmable to support a wide range of functionality. Specifically this project has demonstrated functional integrity of the RPDA package and internal components, as well as functional integrity of the RPDA configured to operate as a Multi-Channel Data Acquisition Controller. This report reviews the design considerations, electrical hardware design, MCM package design, considerations for manufacturing assembly, test and screening, and results from prototype assembly and characterization testing.

Bruce Ohme; Michael Johnson

2009-06-30T23:59:59.000Z

53

A quantum information processor with trapped ions  

E-Print Network (OSTI)

Quantum computers hold the promise to solve certain problems exponentially faster than their classical counterparts. Trapped atomic ions are among the physical systems in which building such a computing device seems viable. In this work we present a small-scale quantum information processor based on a string of $^{40}$Ca${^+}$ ions confined in a macroscopic linear Paul trap. We review our set of operations which includes non-coherent operations allowing us to realize arbitrary Markovian processes. In order to build a larger quantum information processor it is mandatory to reduce the error rate of the available operations which is only possible if the physics of the noise processes is well understood. We identify the dominant noise sources in our system and discuss their effects on different algorithms. Finally we demonstrate how our entire set of operations can be used to facilitate the implementation of algorithms by examples of the quantum Fourier transform and the quantum order finding algorithm.

Philipp Schindler; Daniel Nigg; Thomas Monz; Julio T. Barreiro; Esteban Martinez; Shannon X. Wang; Stephan Quint; Matthias F. Brandl; Volckmar Nebendahl; Christian F. Roos; Michael Chwalla; Markus Hennrich; Rainer Blatt

2013-08-14T23:59:59.000Z

54

The new UA1 calorimeter trigger processor  

SciTech Connect

The UA1 First Level Trigger Processor (TP) is a fast digital machine with a highly parallel pipelined architecture of fast TTL combinational and programmable logic controlled by programmable microsequencers. The TP uses 100,000 IC's housed in 18 crates each containing 21 fastbus sized modules. It is hardwired with a very high level of interconnection. The energy deposited in the upgraded calorimeter is digitised into 1700 bytes of input data every beam crossing. The Processor selects in 1.5 microseconds events for further processing. The new electron trigger has improved hadron jet rejection, achieved by requiring low energy deposition around the electro-magnetic cluster. A missing transverse energy trigger and a total energy trigger have also been implemented.

Baird, S.A.; Campbell, D.; Cawthraw, M.; Coughlan, J.; Flynn, P.; Galagadera, S.; Grayer, G.; Halsall, R.; Shah, T.P.; Stephens, R.

1989-02-01T23:59:59.000Z

55

Novel Water-Neutral Diesel Fuel Processor and Sulfur Trap„Precision Combustion  

NLE Websites -- All DOE Office Websites (Extended Search)

Novel Water-Neutral Diesel Fuel Novel Water-Neutral Diesel Fuel Processor and Sulfur Trap-Precision Combustion Background Solid-Oxide Fuel Cell (SOFC) technology for auxiliary power units (APUs) offers the potential for major contributions toward Department of Energy (DOE) objectives such as clean energy deployment and improved efficiency. Reforming of conventional liquid fuels to produce synthesis gas (syngas) fuel for SOFC stacks is a practical approach for operating fuel cell APUs

56

DOE Hydrogen Analysis Repository: Quick Starting Fuel Processors - A  

NLE Websites -- All DOE Office Websites (Extended Search)

Quick Starting Fuel Processors - A Feasibility Study Quick Starting Fuel Processors - A Feasibility Study Project Summary Full Title: Quick Starting Fuel Processors - A Feasibility Study Project ID: 164 Principal Investigator: Shabbir Ahmed Brief Description: This project studied the feasibility of fast-starting fuel processors to meet DOE goals for on-board fuel processing. Keywords: On-board fuel processor Purpose Study the feasibility of developing fast-starting fuel processors that can meet DOE's targets, investigate designs and strategies capable of meeting the start-up targets, and validate models using experimental and hardware data. Performer Principal Investigator: Shabbir Ahmed Organization: Argonne National Laboratory (ANL) Address: 9700 South Cass Ave Argonne, IL 60439 Telephone: 630-252-4553

57

PCOUNT: A power aware fetch policy in Simultaneous Multithreading processors  

Science Conference Proceedings (OSTI)

The Simultaneous Multithreading (SMT) architecture improves the resource efficiency via scheduling and executing concurrent threads in the same core. Moreover, fetch policies are proposed to assign priorities in the fetch stage to manage the shared resources. ... Keywords: power efficiency, power aware fetch policy, simultaneous multithreading processor, simultaneous multithreading architecture, resource efficiency, concurrent thread, power consumption, power management scheme, multicore processor, shared system resource, SMT environment, SMT processor, PCOUNT, computation resource, memory accessing resource, PCOUNT fetches, CPU cycle

Lichen Weng; Gang Quan; Chen Liu

2011-07-01T23:59:59.000Z

58

The Potential of the Cell Processor for Scientific Computing  

E-Print Network (OSTI)

Journal of High Performance Computing Applications, 2004. L.Novel Processor Architecture for High Performance Computing.High Performance Computing in the Asia- Pacific Region,

Williams, Samuel; Shalf, John; Oliker, Leonid; Husbands, Parry; Kamil, Shoaib; Yelick, Katherine

2005-01-01T23:59:59.000Z

59

Dense and Sparse Matrix Operations on the Cell Processor  

E-Print Network (OSTI)

Journal of High Performance Computing Applications, 2004. L.Novel Processor Architecture for High Performance Computing.High Performance Computing in the Asia-Pacific Region, 2000.

Williams, Samuel W.; Shalf, John; Oliker, Leonid; Husbands, Parry; Yelick, Katherine

2005-01-01T23:59:59.000Z

60

Acceleration of CFD and Data Analysis Using Graphics Processors.  

E-Print Network (OSTI)

??Graphics processing units function well as high performance computing devices for scientific computing. The non-standard processor architecture and high memory bandwidth allow graphics processing units… (more)

Khajeh Saeed, Ali

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "gas processors associa" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Forthcoming Upgrades to the ARM MMCRs: Improved Radar Processor...  

NLE Websites -- All DOE Office Websites (Extended Search)

Improved Radar Processor and Dual-Polarization K. P. Moran, B. E. Martner, and K. A. Clark National Oceanic and Atmospheric Administration Environmental Technology Laboratory...

62

Design and implementation of a MicroBlaze-based warp processor  

Science Conference Proceedings (OSTI)

While soft processor cores provided by FPGA vendors offer designers with increased flexibility, such processors typically incur penalties in performance and energy consumption compared to hard processor core alternatives. The recently developed technology ... Keywords: FPGA, Warp processors, configurable logic, dynamic optimization, hardware/software partitioning, just-in-time (JIT) compilation, soft processor cores

Roman Lysecky; Frank Vahid

2009-04-01T23:59:59.000Z

63

Instantaneous current modeling in a complex VLIW processor core  

Science Conference Proceedings (OSTI)

Measuring and modeling instantaneous current consumption or current dynamics of a processor is important in embedded system designs, wireless communications, low-energy mobile computing, security of communications, and reliability. In this paper, we ... Keywords: Instruction-level current model, current and power measurement in a processor, instantaneous current model, power and energy model

Radu Muresan; Catherine Gebotys

2005-05-01T23:59:59.000Z

64

Efficient event-driven simulation of parallel processor architectures  

Science Conference Proceedings (OSTI)

In this paper we present a new approach for generating high-speed optimized event-driven instruction set level simulators for adaptive massively parallel processor architectures. The simulator generator is part of a methodology for the systematic mapping, ... Keywords: embedded tools, modeling, processor arrays, simulation

Alexey Kupriyanov; Dmitrij Kissler; Frank Hannig; Jürgen Teich

2007-04-01T23:59:59.000Z

65

Asynchronous ARM processor employing an adaptive pipeline architecture  

Science Conference Proceedings (OSTI)

This paper presented an asynchronous ARM processor employing adaptive pipeline and enhanced control schemes. This adaptive pipeline employed stage-skipping and stage-combining. The stage-skipping removed the redundant stage operations, bubbles. The stage-combining ... Keywords: adaptive pipeline, asynchronous design, processor

Je-Hoon Lee; Seung-Sook Lee; Kyoung-Rok Cho

2007-03-01T23:59:59.000Z

66

Soft-core processor study for node-based architectures.  

SciTech Connect

Node-based architecture (NBA) designs for future satellite projects hold the promise of decreasing system development time and costs, size, weight, and power and positioning the laboratory to address other emerging mission opportunities quickly. Reconfigurable Field Programmable Gate Array (FPGA) based modules will comprise the core of several of the NBA nodes. Microprocessing capabilities will be necessary with varying degrees of mission-specific performance requirements on these nodes. To enable the flexibility of these reconfigurable nodes, it is advantageous to incorporate the microprocessor into the FPGA itself, either as a hardcore processor built into the FPGA or as a soft-core processor built out of FPGA elements. This document describes the evaluation of three reconfigurable FPGA based processors for use in future NBA systems--two soft cores (MicroBlaze and non-fault-tolerant LEON) and one hard core (PowerPC 405). Two standard performance benchmark applications were developed for each processor. The first, Dhrystone, is a fixed-point operation metric. The second, Whetstone, is a floating-point operation metric. Several trials were run at varying code locations, loop counts, processor speeds, and cache configurations. FPGA resource utilization was recorded for each configuration. Cache configurations impacted the results greatly; for optimal processor efficiency it is necessary to enable caches on the processors. Processor caches carry a penalty; cache error mitigation is necessary when operating in a radiation environment.

Van Houten, Jonathan Roger; Jarosz, Jason P.; Welch, Benjamin James; Gallegos, Daniel E.; Learn, Mark Walter

2008-09-01T23:59:59.000Z

67

Minimizing weighted waiting time variance on a single processor  

Science Conference Proceedings (OSTI)

This paper considers the problem of scheduling n non-preemptive jobs on a single processor. Each job may have different size and weight. The objective is to minimize the weighted waiting time variance (WWTV). It is shown that the proof of one previous ... Keywords: Single processor scheduling, Weighted completion time variance, Weighted waiting time variance

Xiaoyun Xu

2011-11-01T23:59:59.000Z

68

SPOCS: Application Specific Signal Processor for OFDM Communication Systems  

Science Conference Proceedings (OSTI)

This paper presents an Application-Specific Signal Processor (ASSP) for Orthogonal Frequency Division Multiplexing (OFDM) Communication Systems, called SPOCS. The instruction set and its architecture are specially designed for OFDM systems, such as Fast ... Keywords: ASSP, Application-Specific Instruction-Set Processor (ASIP), Bit manipulation, Communications, DSP, FFT, OFDM

Jae Hyun Baek; Sung Dae Kim; Myung H. Sunwoo

2008-12-01T23:59:59.000Z

69

Hierarchical Verification for Increasing Performance in Reliable Processors  

Science Conference Proceedings (OSTI)

Dynamic verification using the checker processor introduces severe degradation in performance unless the checker is as fast as the main processor core. Without widening the checker's bandwidth, we propose an active verification management (AVM) approach ... Keywords: Active verification management, Correctness non-critically, Fault tolerance, Filter checker, Hierarchical verification, Performance

Joonhyuk Yoo; Manoj Franklin

2008-06-01T23:59:59.000Z

70

Energy Department, Northwest Food Processors Association Set Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Department, Northwest Food Processors Association Set Energy Department, Northwest Food Processors Association Set Energy Efficiency Goals for Industry Energy Department, Northwest Food Processors Association Set Energy Efficiency Goals for Industry February 17, 2009 - 12:00am Addthis PORTLAND, OR - The U.S. Department of Energy (DOE) and the Northwest Food Processors Association today set ambitious goals to reduce energy use and carbon emissions in the industrial sector. DOE Industrial Technologies Program Manager Douglas Kaempf and Northwest Food Processors Association (NWFPA) President David Zepponi signed a Memorandum of Understanding (MOU) announcing an industry-wide target of reducing energy intensity (energy use per unit of output) by 25 percent over the next ten years. This aggressive goal demonstrates the continued leadership of the Northwest region and the

71

Inside: Instruction selection/identification & design exploration for extensible processors  

E-Print Network (OSTI)

This paper presents the INSIDE system that rapidly searches the design space for extensible processors, given area and performance constraints of an embedded application, while minimizing the design turn-around-time. Our system consists of a) a methodology to determine which code segments are most suited for implementation as a set of extensible instructions, b) a heuristic algorithm to select pre-configured extensible processors as well as extensible instructions (library), and c) an estimation tool which rapidly estimates the performance of an application on a generated extensible processor. By selecting the right combination of a processor core plus extensible instructions, we achieve a performance increase on average of 2.03x (up to 7x) compared to the base processor core at a minimum hardware overhead of 25 % on average. 1.

Newton Cheung; Sri Parameswaran; Jörg Henkel

2002-01-01T23:59:59.000Z

72

Parallel processor-based raster graphics system architecture  

DOE Patents (OSTI)

An apparatus for generating raster graphics images from the graphics command stream includes a plurality of graphics processors connected in parallel, each adapted to receive any part of the graphics command stream for processing the command stream part into pixel data. The apparatus also includes a frame buffer for mapping the pixel data to pixel locations and an interconnection network for interconnecting the graphics processors to the frame buffer. Through the interconnection network, each graphics processor may access any part of the frame buffer concurrently with another graphics processor accessing any other part of the frame buffer. The plurality of graphics processors can thereby transmit concurrently pixel data to pixel locations in the frame buffer.

Littlefield, Richard J. (Seattle, WA)

1990-01-01T23:59:59.000Z

73

Control of Natural Gas Catalytic Partial Oxidation for Hydrogen Generation in Fuel Cell Applications1  

E-Print Network (OSTI)

Control of Natural Gas Catalytic Partial Oxidation for Hydrogen Generation in Fuel Cell Ghosh3 , Huei Peng2 Abstract A fuel processor that reforms natural gas to hydrogen-rich mixture to feed of the hydrogen in the fuel processor is based on catalytic partial oxidation of the methane in the natural gas

Peng, Huei

74

A user manual for GINGER and its post-processor XPLOTGIN  

E-Print Network (OSTI)

to GINGER at NERSC . . . . . . . . . . . . . . . . . . . .Processors at NERSC . . . . . . . . . . 2.5.1 Cray-T3EMultiple Processors at NERSC . Output Diagnostics Control

Fawley, William M.

2002-01-01T23:59:59.000Z

75

Adaptive Cache Compression for High-Performance Processors  

Science Conference Proceedings (OSTI)

Modern processors use two or more levels ofcache memories to bridge the rising disparity betweenprocessor and memory speeds. Compression canimprove cache performance by increasing effectivecache capacity and eliminating misses. However,decompressing ...

Alaa R. Alameldeen; David A. Wood

2004-06-01T23:59:59.000Z

76

Performance of OpenMP Benchmarks on Multicore Processors  

Science Conference Proceedings (OSTI)

The appearance of Multicore processors brings high performance computing to the desktop and opens the doors of mainstream computing for parallel computing. This paradigm shift leads the integration of parallel programming standards for high-end shard-memory ...

Ami Marowka

2008-06-01T23:59:59.000Z

77

Performance and energy efficiency in simple simultaneous multithreading processor cores  

E-Print Network (OSTI)

Simultaneous multithreading, where instructions from different threads share processor resources, has shown promise in delivering high throughput with little area and power overhead. We compare where in the performance ...

Uhler, Richard Stephen

2010-01-01T23:59:59.000Z

78

EVAL: Utilizing processors with variation-induced timing errors  

Science Conference Proceedings (OSTI)

Parameter variation in integrated circuits causes sections of a chip to be slower than others. If, to prevent any resulting timing errors, we design processors for worst-case parameter values, we may lose substantial performance. An alternate approach ...

Smruti Sarangi; Brian Greskamp; Abhishek Tiwari; Josep Torrellas

2008-11-01T23:59:59.000Z

79

Suggested integrated optical implementation of pipelined polynomial processors  

SciTech Connect

Optical systolic pipeline processors for polynomial evaluation can be built using horner's rule. With integrated optics techniques, it will be possible to fabricate large order pipelines operating at very high speeds. 10 references.

Verber, C.M.; Kenan, R.P.; Caulfield, H.J.; Ludman, J.E.; Stilwell, P.D., Jr.

1983-01-01T23:59:59.000Z

80

Pipeline Behavior Prediction for Superscalar Processors by Abstract Interpretation  

E-Print Network (OSTI)

For real time systems not only the logical function is important but also the timing behavior, e. g. hard real time systems must react inside their deadlines. To guarantee this it is necessary to know upper bounds for the worst case execution times (WCETs). The accuracy of the prediction of WCETs depends strongly on the ability to model the features of the target processor. Cache memories, pipelines and parallel functional units are architectural components which are responsible for the speed gain of modern processors. It is not trivial to determine their influence when predicting the worst case execution time of programs. This paper describes a method to predict the behavior of pipelined superscalar processors and reports initial results of prototypical implementation for the SuperSPARC I processor.

Jörn Schneider; Christian Ferdinand

1999-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "gas processors associa" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Pine Lake Corn Processors LLC | Open Energy Information  

Open Energy Info (EERE)

Farmer owned investment and management team which developed and manages the Pine Lake ethanol plant. References Pine Lake Corn Processors LLC1 LinkedIn Connections CrunchBase...

82

Geothermal Food Processors Agricultural Drying Low Temperature Geothermal  

Open Energy Info (EERE)

Food Processors Agricultural Drying Low Temperature Geothermal Food Processors Agricultural Drying Low Temperature Geothermal Facility Jump to: navigation, search Name Geothermal Food Processors Agricultural Drying Low Temperature Geothermal Facility Facility Geothermal Food Processors Sector Geothermal energy Type Agricultural Drying Location Fernley, Nevada Coordinates 39.6079683°, -119.2518349° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[]}

83

Instruction Packing for a 32-bit Stack-Based Processor  

E-Print Network (OSTI)

Abstract- This work proposed a design and development of a 32-bit stack-based processor for embedded systems. A reference processor has a 32-bit stack-based instruction set. This work proposed a technique of instruction packing which packs several instructions into one 32-bit instruction unit. Therefore, the instruction size is reduced. The result of the experiment shows that the proposed technique achieves around 30 % reduction in code size.

Witcharat Lertteerawattana; Tanes Jedsadawaranon; Prabhas Chongstitvatana

2007-01-01T23:59:59.000Z

84

Building compilers for DirectX 9.0 compatible graphics processors  

Science Conference Proceedings (OSTI)

Custom graphics processors or GPUs have been available for a few years now. Currently these graphics processors are slowing evolving to generalized stream processors. These custom vector processors [1] have special support for vector and matrix data ... Keywords: computer graphics, micro-programmable graphics hardware, virtual machines

Yahya H. Mirza

2003-10-01T23:59:59.000Z

85

Extended Durability Testing of an External Fuel Processor for a Solid Oxide Fuel Cell (SOFC)  

SciTech Connect

Durability testing was performed on an external fuel processor (EFP) for a solid oxide fuel cell (SOFC) power plant. The EFP enables the SOFC to reach high system efficiency (electrical efficiency up to 60%) using pipeline natural gas and eliminates the need for large quantities of bottled gases. LG Fuel Cell Systems Inc. (formerly known as Rolls-Royce Fuel Cell Systems (US) Inc.) (LGFCS) is developing natural gas-fired SOFC power plants for stationary power applications. These power plants will greatly benefit the public by reducing the cost of electricity while reducing the amount of gaseous emissions of carbon dioxide, sulfur oxides, and nitrogen oxides compared to conventional power plants. The EFP uses pipeline natural gas and air to provide all the gas streams required by the SOFC power plant; specifically those needed for start-up, normal operation, and shutdown. It includes a natural gas desulfurizer, a synthesis-gas generator and a start-gas generator. The research in this project demonstrated that the EFP could meet its performance and durability targets. The data generated helped assess the impact of long-term operation on system performance and system hardware. The research also showed the negative impact of ambient weather (both hot and cold conditions) on system operation and performance.

Mark Perna; Anant Upadhyayula; Mark Scotto

2012-11-05T23:59:59.000Z

86

VHISPER: a high speed dual mode VLIW and Superscalar Processor  

E-Print Network (OSTI)

Considerable effort has gone into streamlining the logic in pipelined processors. Further Increases in speed for a pipelined processor will probably come about from. either increasing the pipeline depth, superpipelining or increasing the width of tile datapath or control path. The later can be achieved by either issuing more than one instruction per cycle, Superscalar, or by using a VLIW (Very Long Instruction Word) architecture in which many operations are performed in parallel by a single instruction. To achieve an overall gain in performance, significant increases in speed must be accompanied) by highly utilized resources. Idle resources contribute little to performance while increasing overall system costs and power consumption. As pipeline depth increases, a single instruction stream call riot keep all tile pipeline stages in a processor fully utilized. Control and data dependencies within the instruction stream limit the number of instructions that can be active for a given instruction stream. So better functional utilization can be achieved by using instructions from multiple streams. A new instruction issue scheme using multiple threads is presented for a dual mode processor. VHISPER, VLIW High speed Superscale Processor. The scheme is designed to increase throughout and maintain a fairly resource utilization. A multithread VHISPER architecture is modeled in Verilog and the instruction issue scheme is tested on this model. Obtained results indicate that VHISPER performs 43% better in the VLIW mode than in the 2nd degree Superscalar mode and 25 % better than in the 3rd degree Superscale mode.

Mellacheruvu, Rajesh Kumar

1994-01-01T23:59:59.000Z

87

Rapid energy estimation of computations on FPGA based soft processors  

E-Print Network (OSTI)

Abstract — FPGA based soft processors are an attractive option for implementing embedded applications. As energy efficiency has become a key performance metric, techniques that can quickly and accurately obtain the energy performance of these soft processors are needed. While low-level simulation based on traditional FPGA design flow is too time consuming for obtaining such energy performance, we propose a methodology based on instruction level energy profiling. We first analyze the energy dissipation of various instructions. An energy estimator is built using this information. To illustrate the effectiveness of our approach, the energy performance of several FFT and matrix multiplication software programs running on a state-of-the-art soft processor is evaluated using the estimator. Compared with the results obtained through low-level simulation, an average estimation error of 5.9 % is observed in our experiments. I.

Jingzhao Ou; Viktor K. Prasanna

2004-01-01T23:59:59.000Z

88

Microprogrammable high-speed bit slice image processor  

Science Conference Proceedings (OSTI)

The processor's basic architecture is dynamically alterable into either a serial or pipelined configuration achieving higher speed than either architecture alone could provide. The speed is enhanced further by the availability of eight parallel paths allowing a maximum throughput in excess of 40 million operations per second. The algorithms implemented include sobel edge, shape/connectivity, laplacian, histogram flattening and compression, a sophisticated peak detection scheme, and a destreaking function. Being microprogrammable, the processor will allow implementation of additional algorithms for alternative applications. Ensuing discussion develops the overall architecture from a functional point of view illustrating the parallelism in the design which allowed efficient implementation of this general class of algorithms.

Thomas, P.E.; Glass, R.D.

1981-01-01T23:59:59.000Z

89

Analysis of dynamic power management on multi-core processors  

Science Conference Proceedings (OSTI)

Power management of multi-core processors is extremely important because it allows power/energy savings when all cores are not used. OS directed power management according to ACPI (Advanced Power and Configurations Interface) specifications is the common ... Keywords: ACPI, multi-core, operating system, performance, power management

W. Lloyd Bircher; Lizy K. John

2008-06-01T23:59:59.000Z

90

Processor Pipelines and Their Properties for Static WCET Analysis  

E-Print Network (OSTI)

When developing real-time systems, the worst-case execution time (WCET) is a commonly used measure for predicting and analyzing program and system timing behavior. Such estimates should preferrably be provided by static WCET analysis tools. Their analysis is made difficult by features of common processors, such as pipelines and caches.

Jakob Engblom; Bengt Jonsson

2002-01-01T23:59:59.000Z

91

Stability of a processor sharing queue with varying throughput  

E-Print Network (OSTI)

In this paper, we present a stability criterion for Processor Sharing queues, in which the throughput may depend on the number of customers in the system (in such cases such as interferences between the users). Such a system is represented by a point measure-valued stochastic recursion keeping track of the remaining processing times of the customers.

Moyal, Pascal

2008-01-01T23:59:59.000Z

92

Dynamic MIPS rate stabilization in out-of-order processors  

Science Conference Proceedings (OSTI)

Today's microprocessor cores reach high performance levels not only by their high clock rate but also by the concurrent execution of a large number of instructions. Because of the relationship between power and frequency, it becomes attractive to run ... Keywords: embedded systems, ooo processors, real-time systems, stabilization, variability

Jinho Suh; Michel Dubois

2009-06-01T23:59:59.000Z

93

Overcoming the Limitations of Conventional Vector Processors Christos Kozyrakis  

E-Print Network (OSTI)

file (VRF), the difficulty of im- plementing precise exceptions for vector instructions, and the high to support all-to-all communication between the functional units, as it is the case with the centralized VRF-processor, a multi-lane vector design with a centralized VRF. For the EEMBC benchmarks and assuming equal die area

Kozyrakis, Christos

94

Rank based dynamic voltage and frequency scaling fortiled graphics processors  

Science Conference Proceedings (OSTI)

With increasing interest in sophisticated graphics capabilities in mobile systems, energy consumption of graphics hardware is becoming a major design concern in addition to the traditional performance enhancement criteria. Our study of various modern ... Keywords: dynamic voltage and frequency scaling, graphics processor, low power, workload prediction

B.V.N Silpa; Gummidipudi Krishnaiah; Preeti Ranjan Panda

2010-10-01T23:59:59.000Z

95

Rapid Energy Estimation of Computations on FPGA based Soft Processors  

E-Print Network (OSTI)

such energy performance, we propose a methodology based on instruction level energy profiling. We first, techniques that can quickly and ac- curately obtain the energy dissipation of the software programs executing1 Rapid Energy Estimation of Computations on FPGA based Soft Processors Jingzhao Ou and Viktor K

Hwang, Kai

96

Scheduling workflow applications on processors with different capabilities  

Science Conference Proceedings (OSTI)

Efficient scheduling of workflow applications represented by weighted directed acyclic graphs (DAG) on a set of heterogeneous processors is essential for achieving high performance. The optimization problem is NP-complete in general. A few heuristics ... Keywords: DAG, Heterogeneous systems, List scheduling, Task scheduling, Workflow

Zhiao Shi; Jack J. Dongarra

2006-05-01T23:59:59.000Z

97

Selective word reading for high performance and low power processor  

Science Conference Proceedings (OSTI)

In this paper, we propose Selective Word Reading (SWR) technique for a low power processor without a loss of performance. The development of this technique was motivated by the differences between store unit sizes per storage level. In typical cases, ... Keywords: cache architecture, cache controller, cache memory, low power, selective word, word-interleaved cache

Yun Kyo Cho; Seong Tae Jhang; Chu Shik Jhon

2011-11-01T23:59:59.000Z

98

The IXM2 Parallel Associative Processor for AI  

Science Conference Proceedings (OSTI)

Describes the IXM2 associative processor and its main application in speech-to-speech translation. The IXM2 is a semantic memory system machine that began as a faithful implementation of the NETL semantic network machine and grew into a massively parallel ...

Tetsuya Higuchi; Kennichi Handa; Naoto Takahashi; Tatsumi Furuya; Hitoshi Iida; Eiishiro Sumita; Kozo Oi; Hiroaki Kitano

1994-11-01T23:59:59.000Z

99

Transactional memories for multi-processor FPGA platforms  

Science Conference Proceedings (OSTI)

Programming efficiency of heterogeneous concurrent systems is limited by the use of lock-based synchronization mechanisms. Transactional memories can greatly improve the programming efficiency of such systems. In field-programmable computing machines, ... Keywords: Multi-processor FPGAs, Transactional memories

Christoforos Kachris; Chidamber Kulkarni

2011-01-01T23:59:59.000Z

100

Performance modelling of a network processor using POOSL  

Science Conference Proceedings (OSTI)

The increasing complexity of innovative real-time hardware/software systems forced industry to consider system-level design methods. Before actually implementing a system with hardware and software components, system-level design methods enable analysing ... Keywords: concurrency, formal description techniques, network processor, parallel object-oriented specification language, performance modelling, system-level design

B. D. Theelen; J. P. M. Voeten; R. D. J. Kramer

2003-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "gas processors associa" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Development of 50 kW Fuel Processor for Stationary Fuel Cell Applications  

DOE Green Energy (OSTI)

The objective of the project was to develop and test a fuel processor capable of producing high hydrogen concentration (>98%) with less than ppm quantities of carbon dioxide and carbon monoxide at lower capital cost and higher efficiency, compared to conventional natural gas reformers. It was intended that we achieve our objective by developing simple reactor/process design, and high durability CO2 absorbents, to replace pressure swing adsorption (PSA) or membrane separators. Cost analysis indicated that we would not meet DOE cost goals so the project was terminated before construction of the full scale fuel processor. The work on adsorbent development was focused on the development of calcium oxide-based reversible CO2 absorbents with various microstructures and morphologies to determine the optimum microstructure for long-term reversible CO2 absorption. The effect of powder production process variables was systematically studied including: the final target compositions, the reagents from which the final products were derived, the pore forming additives, the processing time and temperature. The sorbent materials were characterized in terms of their performance in the reversible reaction with CO2 and correlation made to their microstructure.

James F. Stevens; Balaji Krishnamurthy; Paolina Atanassova; Kerry Spilker

2007-08-29T23:59:59.000Z

102

FlexCC2: An Optimizing Retargetable C Compiler for DSP Processors  

Science Conference Proceedings (OSTI)

The design of efficient compilers for embedded processors has emerged with the growing importance of embedded application-specific processors and DSPs in consumer, multimedia and communication applications. We present in this paper the FlexCC2 compiler. ...

Valérie Bertin; Jean-Marc Daveau; Philippe Guillaume; Thierry Lepley; Denis Pilat; Claire Richard; Miguel Santana; Thomas Thery

2002-10-01T23:59:59.000Z

103

NOAA Awarded 2.6 Million Processor Hours at NERSC to Run Climate...  

NLE Websites -- All DOE Office Websites (Extended Search)

NOAA Awarded 2.6 Million Processor Hours at NERSC to Run Climate Change Models NOAA Awarded 2.6 Million Processor Hours at NERSC to Run Climate Change Models September 11, 2008...

104

Custom-Instruction Synthesis for Extensible-Processor Platforms  

E-Print Network (OSTI)

Efficiency and flexibility are critical, but often conflicting, design goals in embedded system design. The recent emergence of extensible processors promises a favorable tradeoff between efficiency and flexibility, while keeping design turnaround times short. Current extensible processor design flows automate several tedious tasks, but typically require designers to manually select the parts of the program that are to be implemented as custom instructions. In this work, we describe an automatic methodology to select custom instructions to augment an extensible processor, in order to maximize its efficiency for a given application program. We demonstrate that the number of custom instruction candidates grows rapidly with program size, leading to a large design space, and that the quality (speedup) of custom instructions varies significantly across this space, motivating the need for the proposed flow. Our methodology features cost functions to guide the custom instruction selection process, as well as static and dynamic pruning techniques to eliminate inferior parts of the design space from consideration. Furthermore, we employ a two-stage process, wherein a limited number of promising instruction candidates are first short-listed using efficient selection criteria, and then evaluated in more detail through cycle-accurate instruction set simulation and synthesis of the corresponding hardware, to identify the custom instruction combinations that result in the highest program speedup or maximize speedup under a given area constraint. We have evaluated the proposed techniques using a state-of-the-art extensible processor platform, in the context of a commercial design flow. Experiments with several benchmark programs indicate that custom processors synthesized using automa...

Fei Sun; Student Member; Anand Raghunathan; Srivaths Ravi; Senior Member; Niraj K. Jha

2004-01-01T23:59:59.000Z

105

Fast algorithms for thermal constrained performance optimization in DAG scheduling on multi-core processors  

Science Conference Proceedings (OSTI)

Thermal management is highly crucial for efficient exploitation of the potentially enormous computational power offered by advanced multi-core processors. Higher temperatures can adversely affect these processors. Without any thermal constraint, a task ... Keywords: application-oriented task graphs, DAG scheduling, thermal constrained performance optimization, advanced multicore processors, PAVD, TAVD, greedy-based approach

H. F. Sheikh; I. Ahmad

2011-07-01T23:59:59.000Z

106

Low-power TinyOS tuned processor platform for wireless sensor network motes  

Science Conference Proceedings (OSTI)

In this article we describe a low-power processor platform for use in Wireless Sensor Network (WSN) nodes (motes). WSN motes are small, battery-powered devices comprised of a processor, sensors, and a radio frequency transceiver. It is expected that ... Keywords: Embedded system design, Wireless Sensor Network, hardware-software codesign, low power processor

R. K. Raval; C. H. Fernandez; C. J. Bleakley

2010-05-01T23:59:59.000Z

107

Specification-based Compaction of Directed Tests for Functional Validation of Pipelined Processors  

E-Print Network (OSTI)

Set Test Generation Processor Specification Compaction (States & Transitions) Coverage Model (FSM states/transitions) Processor Model (FSM) Figure 1: Functional test compaction methodology Figure 1 shows of a processor, we create a finite state machine (FSM) model and define FSM state and transition coverage metrics

Mishra, Prabhat

108

JV 38-APPLICATION OF COFIRING AND COGENERATION FOR SOUTH DAKOTA SOYBEAN PROCESSORS  

DOE Green Energy (OSTI)

Cogeneration of heat and electricity is being considered by the South Dakota Soybean Processors for its facility in Volga, South Dakota, and a new facility to be located in Brewster, Minnesota. The Energy & Environmental Research Center has completed a feasibility study, with 40% funding provided from the U.S. Department of Energy's Jointly Sponsored Research Program to determine the potential application of firing biomass fuels combined with coal and comparative economics of natural gas-fired turbines. Various biomass fuels are available at each location. The most promising options based on availability are as follows. The economic impact of firing 25% biomass with coal can increase return on investment by 0.5 to 1.5 years when compared to firing natural gas. The results of the comparative economics suggest that a fluidized-bed cogeneration system will have the best economic performance. Installation for the Brewster site is recommended based on natural gas prices not dropping below a $4.00/MMBtu annual average delivered cost. Installation at the Volga site is only recommended if natural gas prices substantially increase to $5.00/MMBtu on average. A 1- to 2-year time frame will be needed for permitting and equipment procurement.

Darren D. Schmidt

2002-11-01T23:59:59.000Z

109

A2 Processor User's Manual for Blue Gene/Q  

NLE Websites -- All DOE Office Websites (Extended Search)

A2 Processor A2 Processor User's Manual for Blue Gene/Q Note: This document and the information it contains are provided on an as-is basis. There is no plan for providing for future updates and corrections to this document. October 23, 2012 Version 1.3 Title Page ® Copyright and Disclaimer © Copyright International Business Machines Corporation 2010, 2012 Printed in the United States of America October 2012 IBM, the IBM logo, and ibm.com are trademarks or registered trademarks of International Business Machines Corp., registered in many jurisdictions worldwide. Other product and service names might be trademarks of IBM or other compa- nies. A current list of IBM trademarks is available on the Web at "Copyright and trademark information" at www.ibm.com/legal/copytrade.shtml.

110

G.: Developing energy-aware strategies for the blackfin processor  

E-Print Network (OSTI)

Energy usage is becoming an increasingly important design constraint for all computer systems. This issue is particularly critical in battery powered, embedded designs. Although many embedded processors have developed sophisticated power management schemes, few have produced an accurate, easy-to-use energy estimation framework. In this presentation we will describe the development of an instruction-level energy modeling framework for the Analog Devices Blackfin family of processors. Using this model, we are able to accurately estimate the energy consumed when running this code. While our main goal is to demonstrate that we can perform accurate energy estimation, we also plan to develop a framework that is fully integrated with compilation in order to produce more energy-efficient binaries. In this abstract we briefly describe our methodology and show data that illustrate some of the difficulties encountered when attempting to statically model energy. 1

Steven V; Richard Gentile

2004-01-01T23:59:59.000Z

111

HVDC control system based on parallel digital signal processors  

Science Conference Proceedings (OSTI)

A numerical HVDC control system operating in real time has been developed for a simulator to be used for operator training. The control system, implemented with digital signal processors (DSPs), consists of typical HVDC control functions such as the synchronizing unit, the regulation unit, the protection unit, the firing unit, the tap changer and the reactive power regulation unit. Results from the steady-state and the transient performance validation tests carried out on the IREQ power system simulator are provided.

Maharsi, Y.; Do, V.Q.; Sood, V.K.; Casoria, S.; Belanger, J. [Hydro-Quebec, Varennes, Quebec (Canada)

1995-05-01T23:59:59.000Z

112

High Capacity Network Link Emulation Using Network Processors  

E-Print Network (OSTI)

Network link emulation constitutes an important part of network emulation, wherein links in the topology are emulated to subject the network tra#c to di#erent bandwidths, latencies, packet loss distributions, and queuing models. Increasingly, experimenters are creating topologies with substantial emulation bandwidths; contributed both by a large number of low-speed links and a small number of high-speed links. It is a significant challenge for a link emulator to meet this requirement in real time. Existing solutions for link emulation use general-purpose PC-class machines; the well-understood hardware and software PC platform make it attractive for quick implementation and easy deployment. A PC architecture is largely optimized for compute bound applications with large amounts of exploitable instruction-level parallelism (ILP) and good memory reference locality. Networking applications, on the other hand, have little ILP and instead exhibit a coarser packet-level parallelism. In this thesis, we propose using network processors for building high capacity link emulators. Network processors are programmable processors that employ a multithreaded, multiprocessor architecture to exploit packet-level parallelism, and have instruction sets and hardware support geared towards e#cient implementation of common networking tasks. To evaluate our proposal, we have designed and implemented a link emulator, LinkEM, on the IXP1200 network processor. We present the design and a mapping of LinkEM's tasks across the multiple microengines and hardware threads of the IXP1200. We also give a detailed evaluation of LinkEM, which includes validating its emulation accuracy, and measuring its emulation throughput and link multiplexing capacity. Our evaluation shows that LinkEM has a factor of be...

Abhijeet A. Joglekar; Abhijeet A. Joglekar; Abhijeet A. Joglekar; John Carter; John Regehr; Date Jay Lepreau; David S. Chapman

2004-01-01T23:59:59.000Z

113

Synthesis of Custom Processors based on Extensible Platforms  

E-Print Network (OSTI)

E#ciency and flexibility are critical, but often conflicting, design goals in embedded system design. The recent emergence of extensible processors promises a favorable tradeo# between e#- ciency and flexibility, while keeping design turnaround times short. Current extensible processor design flows automate several tedious tasks, but typically require designers to manually select the parts of the program that are to be implemented as custom instructions. In this work, we describe an automatic methodology to select custom instructions to augment an extensible processor, in order to maximize its e#ciency for a given application program. We demonstrate that the number of custom instruction candidates grows rapidly with program size, leading to a large design space, and that the quality (speedup) of custom instructions varies significantly across this space, motivating the need for the proposed flow. Our methodology features cost functions to guide the custom instruction selection process, as well as static and dynamic pruning techniques to eliminate inferior parts of the design space from consideration. Further, we employ a two-stage process, wherein a limited number of promising instruction candidates are first selected, and then evaluated in more detail through cycle-accurate instruction set simulation and synthesis of the corresponding hardware, to identify the custom instruction combinations that result in the highest program speedup or maximize speedup under a given area constraint.

Fei Sun; Srivaths Ravi; Anand Raghunathan; Niraj K. Jha

2002-01-01T23:59:59.000Z

114

Development of an embedded 3D graphics processor  

E-Print Network (OSTI)

Limitations in processing ability cause major graphical enhancements, such as support for real-time 3D graphics, to be next to impossible within embedded devices. Due to the size, power, and heat dissipation requirements, modern graphics hardware is usually restricted to systems on the scale of personal computers or larger. For this thesis, we have defined a 3D graphics co-processor that is targeted to work on a more embedded scale. The system is specified by limiting it to fixed-point light processing and rasterization. A set of object primitives and instructions are defined to adequately describe almost any scene. These primitives are used to design the algorithms and architecture behind a set of modular functional units. The units are used to realize the processor requirements and features, which include light processing, z-buffering, texturing, and transparency. In order to ensure that the system architecture is versatile in its design, the functional units are analyzed for performance, reconfigurability, and possible trade-offs. A set of both synchronous and asynchronous architectures are proposed using the functional unit blocks. Through cycle accurate comparative simulation, we analyzed the effectiveness of each architecture and found that a hybrid architecture provides the best hardware to speed trade-off between the architectures considered. An appropriate system interface and parallel configuration are also discussed. The end result of the thesis provides a road map for anyone designing a general purpose or application optimized embedded 3D co-processor.

Murray, Brian

2002-01-01T23:59:59.000Z

115

Sequence information signal processor for local and global string comparisons  

DOE Patents (OSTI)

A sequence information signal processing integrated circuit chip designed to perform high speed calculation of a dynamic programming algorithm based upon the algorithm defined by Waterman and Smith. The signal processing chip of the present invention is designed to be a building block of a linear systolic array, the performance of which can be increased by connecting additional sequence information signal processing chips to the array. The chip provides a high speed, low cost linear array processor that can locate highly similar global sequences or segments thereof such as contiguous subsequences from two different DNA or protein sequences. The chip is implemented in a preferred embodiment using CMOS VLSI technology to provide the equivalent of about 400,000 transistors or 100,000 gates. Each chip provides 16 processing elements, and is designed to provide 16 bit, two's compliment operation for maximum score precision of between -32,768 and +32,767. It is designed to provide a comparison between sequences as long as 4,194,304 elements without external software and between sequences of unlimited numbers of elements with the aid of external software. Each sequence can be assigned different deletion and insertion weight functions. Each processor is provided with a similarity measure device which is independently variable. Thus, each processor can contribute to maximum value score calculation using a different similarity measure.

Peterson, John C. (Alta Loma, CA); Chow, Edward T. (San Dimas, CA); Waterman, Michael S. (Culver City, CA); Hunkapillar, Timothy J. (Pasadena, CA)

1997-01-01T23:59:59.000Z

116

Optimal Quantization of Periodic Task Requests on Multiple Identical Processors  

E-Print Network (OSTI)

We simplify the periodic tasks scheduling problem by making a trade off between processor load and computational complexity. A set N of periodic tasks, each characterized by its density # i , contains n possibly unique values of # i . We transform N through a process called quantization, in which each # i N is mapped onto a service level s j L, where L jjl # n and # i s j (this second condition differentiates this problem from the p-median problem on the real line). We define the Periodic Task Quantization problem with Deterministic input (PTQ-D) and present an optimal polynomial time dynamic programming solution. We also introduce the problem PTQ-S (with Stochastic input) and present an optimal solution. We examine, in a simulation study, the trade off penalty of excess processor load needed to service the set of quantized tasks over the original set, and find that, through quantization onto as few as 15 or 20 service levels, no more than 5 percent processor load is required above the amount requested. Finally, we demonstrate that the scheduling of a set of periodic tasks is greatly simplified through quantization and we present a fast online algorithm that schedules quantized periodic tasks.

Laura E. Jackson; George N. Rouskas

2003-01-01T23:59:59.000Z

117

Design of a multithreaded data cache for a hyperscalar processor  

E-Print Network (OSTI)

A multithreaded data cache for a hyperscalar processor is designed and optimized in this study. The data cache can support two simultaneous requests from a single thread at each cycle. It is assumed that the multithreaded processor using the data cache can generate at most two requests from a single thread at each cycle and then it switches to another thread and repeats the operation. The data cache can handle separate requests from different threads at each cycle. The cache is lockup-free or non-blocking which allows it to serve the request from one thread while servicing the misses from another. The miss penalty is reduced by using a data forwarding technique which will forward the missed data to the CPU as soon as the cache fetches it from memory. The cache can support one outstanding request per thread. So, only one new request from one thread will not be generated unless the previous request has been satisfied. A simulation model of the data cache is developed by using Verilog Hardware Description Language. Trace-driven simulation is carried out to optimize the cache for this high performance processor.

Shahnaz, Munira

1995-01-01T23:59:59.000Z

118

Highly scalable linear solvers on thousands of processors.  

SciTech Connect

In this report we summarize research into new parallel algebraic multigrid (AMG) methods. We first provide a introduction to parallel AMG. We then discuss our research in parallel AMG algorithms for very large scale platforms. We detail significant improvements in the AMG setup phase to a matrix-matrix multiplication kernel. We present a smoothed aggregation AMG algorithm with fewer communication synchronization points, and discuss its links to domain decomposition methods. Finally, we discuss a multigrid smoothing technique that utilizes two message passing layers for use on multicore processors.

Domino, Stefan Paul (Sandia National Laboratories, Albuquerque, NM); Karlin, Ian (University of Colorado at Boulder, Boulder, CO); Siefert, Christopher (Sandia National Laboratories, Albuquerque, NM); Hu, Jonathan Joseph; Robinson, Allen Conrad (Sandia National Laboratories, Albuquerque, NM); Tuminaro, Raymond Stephen

2009-09-01T23:59:59.000Z

119

Solving $k$-Nearest Vector Problem on Multiple Graphics Processors  

E-Print Network (OSTI)

In a recommendation system, customers' preferences are encoded into vectors, and finding the nearest vectors to each vector is an essential part. We define this part of problem as a $k$-nearest vector problem and give an effective algorithm to solve it on multiple graphics processor units (GPUs). By an experiment, we show that when the size of the problem is large, an implementation of the algorithm on two GPUs runs more than 260 times faster than a single core implementation on a latest CPU. We also show that our algorithm scales well with respect to the number of GPUs.

Kato, Kimikazu

2009-01-01T23:59:59.000Z

120

Image matrix processor for fast multi-dimensional computations  

DOE Patents (OSTI)

An apparatus for multi-dimensional computation which comprises a computation engine, including a plurality of processing modules. The processing modules are configured in parallel and compute respective contributions to a computed multi-dimensional image of respective two dimensional data sets. A high-speed, parallel access storage system is provided which stores the multi-dimensional data sets, and a switching circuit routes the data among the processing modules in the computation engine and the storage system. A data acquisition port receives the two dimensional data sets representing projections through an image, for reconstruction algorithms such as encountered in computerized tomography. The processing modules include a programmable local host, by which they may be configured to execute a plurality of different types of multi-dimensional algorithms. The processing modules thus include an image manipulation processor, which includes a source cache, a target cache, a coefficient table, and control software for executing image transformation routines using data in the source cache and the coefficient table and loading resulting data in the target cache. The local host processor operates to load the source cache with a two dimensional data set, loads the coefficient table, and transfers resulting data out of the target cache to the storage system, or to another destination.

Roberson, George P. (Tracy, CA); Skeate, Michael F. (Livermore, CA)

1996-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "gas processors associa" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Unmixed fuel processors and methods for using the same  

DOE Patents (OSTI)

Disclosed herein are unmixed fuel processors and methods for using the same. In one embodiment, an unmixed fuel processor comprises: an oxidation reactor comprising an oxidation portion and a gasifier, a CO.sub.2 acceptor reactor, and a regeneration reactor. The oxidation portion comprises an air inlet, effluent outlet, and an oxygen transfer material. The gasifier comprises a solid hydrocarbon fuel inlet, a solids outlet, and a syngas outlet. The CO.sub.2 acceptor reactor comprises a water inlet, a hydrogen outlet, and a CO.sub.2 sorbent, and is configured to receive syngas from the gasifier. The regeneration reactor comprises a water inlet and a CO.sub.2 stream outlet. The regeneration reactor is configured to receive spent CO.sub.2 adsorption material from the gasification reactor and to return regenerated CO.sub.2 adsorption material to the gasification reactor, and configured to receive oxidized oxygen transfer material from the oxidation reactor and to return reduced oxygen transfer material to the oxidation reactor.

Kulkarni, Parag Prakash (Tustin, CA); Cui, Zhe (Irvine, CA)

2010-08-24T23:59:59.000Z

122

Realization Of Algebraic Processor For XML Documents Processing  

Science Conference Proceedings (OSTI)

In this paper, are presented some possibilities concerning the implementation of an algebraic method for XML hierarchical data processing which makes faster the XML search mechanism. Here is offered a different point of view for creation of advanced algebraic processor (with all necessary software tools and programming modules respectively). Therefore, this nontraditional approach for fast XML navigation with the presented algebraic processor may help to build an easier user-friendly interface provided XML transformations, which can avoid the difficulties in the complicated language constructions of XSL, XSLT and XPath. This approach allows comparatively simple search of XML hierarchical data by means of the following types of functions: specification functions and so named build-in functions. The choice of programming language Java may appear strange at first, but it isn't when you consider that the applications can run on different kinds of computers. The specific search mechanism based on the linear algebra theory is faster in comparison with MSXML parsers (on the basis of the developed examples with about 30%). Actually, there exists the possibility for creating new software tools based on the linear algebra theory, which cover the whole navigation and search techniques characterizing XSLT/XPath. The proposed method is able to replace more complicated operations in other SOA components.

Georgiev, Bozhidar [Fac. Computer Systems and Control Technical University of Sofia, TU-Sofia, Sofia (Bulgaria); Georgieva, Adriana [Fac. Applied Mathematics and Informatics Technical University of Sofia, TU-Sofia, Sofia (Bulgaria)

2010-10-25T23:59:59.000Z

123

Multi-processor including data flow accelerator module  

DOE Patents (OSTI)

An accelerator module for a data flow computer includes an intelligent memory. The module is added to a multiprocessor arrangement and uses a shared tagged memory architecture in the data flow computer. The intelligent memory module assigns locations for holding data values in correspondence with arcs leading to a node in a data dependency graph. Each primitive computation is associated with a corresponding memory cell, including a number of slots for operands needed to execute a primitive computation, a primitive identifying pointer, and linking slots for distributing the result of the cell computation to other cells requiring that result as an operand. Circuitry is provided for utilizing tag bits to determine automatically when all operands required by a processor are available and for scheduling the primitive for execution in a queue. Each memory cell of the module may be associated with any of the primitives, and the particular primitive to be executed by the processor associated with the cell is identified by providing an index, such as the cell number for the primitive, to the primitive lookup table of starting addresses. The module thus serves to perform functions previously performed by a number of sections of data flow architectures and coexists with conventional shared memory therein. A multiprocessing system including the module operates in a hybrid mode, wherein the same processing modules are used to perform some processing in a sequential mode, under immediate control of an operating system, while performing other processing in a data flow mode.

Davidson, George S. (Albuquerque, NM); Pierce, Paul E. (Albuquerque, NM)

1990-01-01T23:59:59.000Z

124

Optical apparatus for forming correlation spectrometers and optical processors  

DOE Patents (OSTI)

Optical apparatus is disclosed for forming correlation spectrometers and optical processors. The optical apparatus comprises one or more diffractive optical elements formed on a substrate for receiving light from a source and processing the incident light. The optical apparatus includes an addressing element for alternately addressing each diffractive optical element thereof to produce for one unit of time a first correlation with the incident light, and to produce for a different unit of time a second correlation with the incident light that is different from the first correlation. In preferred embodiments of the invention, the optical apparatus is in the form of a correlation spectrometer; and in other embodiments, the apparatus is in the form of an optical processor. In some embodiments, the optical apparatus comprises a plurality of diffractive optical elements on a common substrate for forming first and second gratings that alternately intercept the incident light for different units of time. In other embodiments, the optical apparatus includes an electrically-programmable diffraction grating that may be alternately switched between a plurality of grating states thereof for processing the incident light. The optical apparatus may be formed, at least in part, by a micromachining process. 24 figs.

Butler, M.A.; Ricco, A.J.; Sinclair, M.B.; Senturia, S.D.

1999-05-18T23:59:59.000Z

125

Image matrix processor for fast multi-dimensional computations  

DOE Patents (OSTI)

An apparatus for multi-dimensional computation is disclosed which comprises a computation engine, including a plurality of processing modules. The processing modules are configured in parallel and compute respective contributions to a computed multi-dimensional image of respective two dimensional data sets. A high-speed, parallel access storage system is provided which stores the multi-dimensional data sets, and a switching circuit routes the data among the processing modules in the computation engine and the storage system. A data acquisition port receives the two dimensional data sets representing projections through an image, for reconstruction algorithms such as encountered in computerized tomography. The processing modules include a programmable local host, by which they may be configured to execute a plurality of different types of multi-dimensional algorithms. The processing modules thus include an image manipulation processor, which includes a source cache, a target cache, a coefficient table, and control software for executing image transformation routines using data in the source cache and the coefficient table and loading resulting data in the target cache. The local host processor operates to load the source cache with a two dimensional data set, loads the coefficient table, and transfers resulting data out of the target cache to the storage system, or to another destination. 10 figs.

Roberson, G.P.; Skeate, M.F.

1996-10-15T23:59:59.000Z

126

Xetal-II: A Low-Power Massively-Parallel Processor for Video Scene Analysis  

Science Conference Proceedings (OSTI)

A processor architecture combining high-performance and low-power is presented. A prototype chip, Xetal-II, has been realized in 90 nm CMOS technology based on the proposed architecture. Recent experimental results show a compute performance of up to ... Keywords: Low-power VLSI, Parallel processing, Processor tile, SIMD, Smart cameras, Video scene analysis

Anteneh A. Abbo; Richard P. Kleihorst; Ben Schueler

2011-01-01T23:59:59.000Z

127

A Power Capping Controller for Multicore Processors N. Almoosa, W. Song, Y. Wardi and S. Yalamanchili  

E-Print Network (OSTI)

is over- provisioned with a lower average performance per square foot. Similarly, the packaging cost of a multicore processor is determined by the target peak power dissipation. Higher package costs incurred by high peak power dissipation targets increases the cost of the processor even though peak loads may

Lee, Hsien-Hsin "Sean"

128

Low-Complexity Policies for Energy-Performance Tradeoff in Chip-Multi-Processors  

E-Print Network (OSTI)

1 Low-Complexity Policies for Energy-Performance Tradeoff in Chip-Multi-Processors Avshalom Elyada 32000, Israel Abstract Chip-Multi-Processors (CMP) utilize multiple energy-efficient Processing Elements (PEs) to deliver high performance while maintaining an efficient ratio of performance to energy

Ginosar, Ran

129

Automatic Generation of Symbolic Reliability Functions for Processor-Memory-Switch Structures  

Science Conference Proceedings (OSTI)

Calculation of the reliability of computer system architectures with built-in redundancy, such as multiprocessors, is gaining in importance. The task of computing the reliability function for arbitrary Processor-Memory-Switch (PMS) interconnection structures, ... Keywords: symbolic hard-failure reliability functions, Automatic generation of symbolic reliability functions, processor-memory-switch (PMS) structures, reliability computation program

V. Kini; D. P. Siewiorek

1982-08-01T23:59:59.000Z

130

A hybrid heuristic-genetic algorithm for task scheduling in heterogeneous processor networks  

Science Conference Proceedings (OSTI)

Efficient task scheduling on heterogeneous distributed computing systems (HeDCSs) requires the consideration of the heterogeneity of processors and the inter-processor communication. This paper presents a two-phase algorithm, called H2GS, for task scheduling ... Keywords: Directed acyclic graph, Genetic algorithms, Heterogeneous systems, List-based scheduling heuristics, Parallel and distributed processing, Task scheduling

Mohammad I. Daoud; Nawwaf Kharma

2011-11-01T23:59:59.000Z

131

Asymmetric scaling on network packet processors in the dark silicon era  

Science Conference Proceedings (OSTI)

This paper introduces a new architectural technique called asymmetric scaling on heterogeneous multi-core network processor architectures to mitigate the problem of dark silicon in future process technologies. In asymmetric scaling, the number of low ... Keywords: asymmetric scaling, dark silicon, heterogeneous architectures, network processor

Sourav Roy, Xiaomin Lu, Edmund Gieske, Peng Yang, Jim Holt

2013-10-01T23:59:59.000Z

132

Analyzing throughput of power and thermal-constraint multicore processor under NBTI effect  

Science Conference Proceedings (OSTI)

NBTI (Negative Bias Temperature Instability) which can degrade the switching speed of PMOS transistors has become a major reliability challenge. In this paper, we investigate the throughput impact of NBTI on power and thermal-constraint multicore processors ... Keywords: NBTI, multicore processor, negative bias temperature instability, process variation

Shi-Qun Zheng; Ing-Chao Lin; Yen-Han Lee

2011-05-01T23:59:59.000Z

133

Bonneville Power Administration Communication Alarm Processor (CAP). Final report  

Science Conference Proceedings (OSTI)

Power systems operations and maintenance currently face an ever-increasing need for a high level of computerized support. This paper is the final report of a research and development effort undertaken by the Bonneville Power Administration to develop a computerized decision support system to aid operations and maintenance personnel isolate and diagnose faults on a microwave communication system used for centralized dispatch operations. The system, called CAP for Communication Alarm Processor, provides statistical analysis of microwave communication system alarms, as well as an expert system capability for fault isolation and diagnosis. CAP is implemented on a DEC VAX Station 3100 computer, utilizing both knowledge-based programming principles as well as conventional programming techniques.

MacGregor, D.G. [MacGregor-Bates, Inc., Eugene, OR (United States); Goeltz, R. [Oak Ridge National Lab., TN (United States)

1995-01-01T23:59:59.000Z

134

Computing trends using graphic processor in high energy physics  

E-Print Network (OSTI)

One of the main challenges in Heavy Energy Physics is to make fast analysis of high amount of experimental and simulated data. At LHC-CERN one p-p event is approximate 1 Mb in size. The time taken to analyze the data and obtain fast results depends on high computational power. The main advantage of using GPU(Graphic Processor Unit) programming over traditional CPU one is that graphical cards bring a lot of computing power at a very low price. Today a huge number of application(scientific, financial etc) began to be ported or developed for GPU, including Monte Carlo tools or data analysis tools for High Energy Physics. In this paper, we'll present current status and trends in HEP using GPU.

Niculescu, Mihai

2011-01-01T23:59:59.000Z

135

Computing trends using graphic processor in high energy physics  

E-Print Network (OSTI)

One of the main challenges in Heavy Energy Physics is to make fast analysis of high amount of experimental and simulated data. At LHC-CERN one p-p event is approximate 1 Mb in size. The time taken to analyze the data and obtain fast results depends on high computational power. The main advantage of using GPU(Graphic Processor Unit) programming over traditional CPU one is that graphical cards bring a lot of computing power at a very low price. Today a huge number of application(scientific, financial etc) began to be ported or developed for GPU, including Monte Carlo tools or data analysis tools for High Energy Physics. In this paper, we'll present current status and trends in HEP using GPU.

Mihai Niculescu; Sorin-Ion Zgura

2011-06-30T23:59:59.000Z

136

A graphics processor-based intranuclear cascade and evaporation simulation  

E-Print Network (OSTI)

Monte Carlo simulations of the transport of protons in human tissue have been deployed on graphics processing units (GPUs) with impressive results. To provide a more complete treatment of non-elastic nuclear interactions in these simulations, we developed a fast intranuclear cascade-evaporation simulation for the GPU. This can be used to model non-elastic proton collisions on any therapeutically relevant nuclei at incident energies between 20 and 250 MeV. Predictions are in good agreement with Geant4.9.6p2. It takes approximately 2 s to calculate $1\\times 10^6$ 200 MeV proton-$^{16}$O interactions on a NVIDIA GTX680 GPU. A speed-up factor of $\\sim$20 relative to one Intel i7-3820 core processor thread was achieved.

H. Wan Chan Tseung; C. Beltran

2013-09-30T23:59:59.000Z

137

Predicting the Pipeline Behavior of Superscalar Processors by Abstract Interpretation  

E-Print Network (OSTI)

Interpretation Jorn Schneider , Reinhard Wilhelm Christian Ferdinand Universitat des Saarlandes AbsInt Angewandte Informatik GmbH Fachbereich Informatik Universitat des Saarlandes Postfach 15 11 50 Starterzentrum { Gebaude 45 D-66041 Saarbrucken, Germany D-66123 Saarbrucken, Germany js@cs.uni-sb.de, wilhelm@cs.uni-sb.de ferdinand@AbsInt.de Abstract For real time systems not only the logical function is important but also the timing behavior, e. g. hard real time systems must react inside their deadlines. To guarantee this it is necessary to know upper bounds for the worst case execution times (WCETs). The accuracy of the prediction of WCETs depends strongly on the ability to model the features of the target processor.

Schneider; Reinhard Wilhelm; Christian Ferdin; Universitat Des Saarl; Es Absint Angew; Te Informatik Gmbh

2000-01-01T23:59:59.000Z

138

XOP, a fast versatile processor, as a building block for parallel processing in high energy physics experiments  

E-Print Network (OSTI)

XOP, a fast versatile processor, as a building block for parallel processing in high energy physics experiments

Bähler, P; Lingjaerde, Tor; Ljuslin, C; Van Praag, A; Werner, P

1986-01-01T23:59:59.000Z

139

J.F.: Challenges in Mapping Graph Exploration Algorithms on Advanced Multi-core Processors  

E-Print Network (OSTI)

Multi-core processors are a shift of paradigm in computer architecture that promises a dramatic increase in performance. But multi-core processors also bring an unprecedented level of complexity in algorithmic design and software development. In this paper we describe the challenges and design choices involved in parallelizing a breadth-first search (BFS) algorithm on a state-of-the-art multi-core processor, the Cell Broadband Engine (Cell BE). Our experiments obtained on a pre-production Cell BE board running at 3.2 GHz show almost linear speedups when using multiple synergistic processing units, and an impressive level of performance when compared to other processors. The Cell BE is typically an order of magnitude faster than conventional processors, such as the AMD Opteron and the Intel Pentium 4 and Woodcrest, an order of magnitude faster than the MTA-2 multi-threaded processor, and two orders of magnitude faster than a BlueGene/L processor. 1

Oreste Villa; Daniele Paolo Scarpazza; Fabrizio Petrini; Juan Fernández Peinador

2007-01-01T23:59:59.000Z

140

A variational eigenvalue solver on a quantum processor  

E-Print Network (OSTI)

Quantum computers promise to efficiently solve important problems that are intractable on a conventional computer. For quantum systems, where the dimension of the problem space grows exponentially, finding the eigenvalues of certain operators is one such intractable problem and remains a fundamental challenge. The quantum phase estimation algorithm can efficiently find the eigenvalue of a given eigenvector but requires fully coherent evolution. We present an alternative approach that greatly reduces the requirements for coherent evolution and we combine this method with a new approach to state preparation based on ans\\"atze and classical optimization. We have implemented the algorithm by combining a small-scale photonic quantum processor with a conventional computer. We experimentally demonstrate the feasibility of this approach with an example from quantum chemistry: calculating the ground state molecular energy for He-H+, to within chemical accuracy. The proposed approach, by drastically reducing the coherence time requirements, enhances the potential of the quantum resources available today and in the near future.

Alberto Peruzzo; Jarrod McClean; Peter Shadbolt; Man-Hong Yung; Xiao-Qi Zhou; Peter J. Love; Alán Aspuru-Guzik; Jeremy L. O'Brien

2013-04-10T23:59:59.000Z

Note: This page contains sample records for the topic "gas processors associa" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

On a Processor Sharing Queue That Models Balking  

E-Print Network (OSTI)

We consider the processor sharing $M/M/1$-PS queue which also models balking. A customer that arrives and sees $n$ others in the system "balks" (i.e., decides not to enter) with probability $1-b_n$. If $b_n$ is inversely proportional to $n+1$, we obtain explicit expressions for a tagged customer's sojourn time distribution. We consider both the conditional distribution, conditioned on the number of other customers present when the tagged customer arrives, as well as the unconditional distribution. We then evaluate the results in various asymptotic limits. These include large time (tail behavior) and/or large $n$, lightly loaded systems where the arrival rate $\\lambda\\to 0$, and heavily loaded systems where $\\lambda\\to\\infty$. We find that the asymptotic structure for the problem with balking is much different from the standard $M/M/1$-PS queue. We also discuss a perturbation method for deriving the asymptotics, which should apply to more general balking functions.

Zhen, Qiang; Knessl, Charles

2009-01-01T23:59:59.000Z

142

Introducing the PilGRIM: a processor for executing lazy functional languages  

Science Conference Proceedings (OSTI)

Processor designs specialized for functional languages received very little attention in the past 20 years. The potential for exploiting more parallelism and the developments in hardware technology, ask for renewed investigation of this topic. In this ...

Arjan Boeijink; Philip K. F. Hölzenspies; Jan Kuper

2010-09-01T23:59:59.000Z

143

BUILDING MANY-CORE PROCESSOR-TO-DRAM NETWORKS WITH MONOLITHIC CMOS SILICON PHOTONICS  

E-Print Network (OSTI)

Silicon photonics is a promising technology for addressing memory bandwidth limitations in future many-core processors. This article first introduces a new monolithic silicon-photonic technology, which uses a standard bulk ...

Batten, Christopher

144

A Raw processor interface to an 802.11b/g RF front end  

E-Print Network (OSTI)

The Raw microprocessor is a tiled architecture processor designed by the Computer Architecture Group at MIT. Raw was designed in part to be extremely good at performing streaming-type algorithms such as those found in ...

Walker, Benjamin Philip Eugene Zaks

2004-01-01T23:59:59.000Z

145

ATAC : A 1000-core cache coherent processor with on-chip optical network  

E-Print Network (OSTI)

Based on current trends, multicore processors will have 1000 cores or more within the next decade. However, their promise of increased performance will only be realized if their inherent scaling and programming challenges ...

Kurian, George, S.M. Massachusetts Institute of Technology

2010-01-01T23:59:59.000Z

146

Scheduling algorithm: tasks scheduling algorithm for multiple processors with dynamic reassignment  

Science Conference Proceedings (OSTI)

Distributed computing systems [DCSs] offer the potential for improved performance and resource sharing. To make the best use of the computational power available, it is essential to assign the tasks dynamically to that processor whose characteristics ...

Pradeep Kumar Yadav; M. P. Singh; Harendra Kumar

2008-01-01T23:59:59.000Z

147

Safe and Protected Execution for the Morph/AMRM Reconfigurable Processor  

E-Print Network (OSTI)

Technology scaling of CMOS processes brings relatively faster transistors (gates) and slower interconnects (wires), making viable the addition of reconfigurability to increase performance. In the Morph/AMRM system, we are exploring the addition of reconfigurable logic, deeply integrated with the processor core, employing the reconfigurability to manage the cache, datapath, and pipeline resources more effectively. However, integration of reconfigurable logic introduces significant protection and safety challenges for multiprocess execution. We analyze the protection structures in a state of the art microprocessor core (R10000), identifying the few critical logic blocks and demonstrating that the majority of the logic in the processor core can be safely reconfigured. Subsequently, we propose a protection architecture for the Morph/AMRM reconfigurable processor which enable nearly the full range of power of reconfigurability in the processor core while requiring only a small number of fixed logic features which to ensure safe, protected multiprocess execution. 1.

Andrew A. Chien; Jay Byun

1999-01-01T23:59:59.000Z

148

Cogeneration of Fast Motion Estimation Processors and Algorithms for Advanced Video Coding  

Science Conference Proceedings (OSTI)

This paper presents a flexible and scalable motion estimation processor capable of supporting the processing requirements for high-definition (HD) video using the H.264 Advanced Video Codec, which is suited for FPGA implementation. Unlike most previous ...

Jose L. Nunez-Yanez; Atukem Nabina; Eddie Hung; George Vafiadis

2012-03-01T23:59:59.000Z

149

A Processor to get UV-A and UV-B Radiation Products from the...  

NLE Websites -- All DOE Office Websites (Extended Search)

A Processor to get UV-A and UV-B Radiation Products from the ECMWF Forecast System Morcrette, Jean-Jacques European Centre for Medium-Range Weather Forecasts Category: Radiation A...

150

Composition kernel: a multi-core processor virtualization layer for rich functional smart products  

Science Conference Proceedings (OSTI)

Future ambient intelligence environments will embed powerful multi-core processors to compose various functionalities into a smaller number of hardware components. This makes the maintainability of intelligent environments better because it is not easy ...

Tatsuo Nakajima; Yuki Kinebuchi; Alexandre Courbot; Hiromasa Shimada; Tsung-Han Lin; Hitoshi Mitake

2010-10-01T23:59:59.000Z

151

A user manual for GINGER and its post-processor XPLOTGIN  

E-Print Network (OSTI)

GINGER FEL Code Manual: Version 1.3f — December 2001i GINGER FEL Code Manual: Version 1.3f — December 2001 iiiA User Manual for GINGER and its Post-Processor XPLOTGIN

Fawley, William M.

2002-01-01T23:59:59.000Z

152

SLAC Scanner Processor: a FASTBUS module for data collection and processing  

SciTech Connect

A new, general purpose, programmable FASTBUS module, the SLAC Scanner Processor (SSP), is introduced. Both hardware and software elements of SSP operation are discussed. The role of the SSP within the upgraded Mark II Detector at SLAC is described.

Brafman, H.; Glanzman, T.; Lankford, A.J.; Olsen, J.; Paffrath, L.

1984-10-01T23:59:59.000Z

153

A unified processor model for compiler verification and simulation using ASM  

Science Conference Proceedings (OSTI)

For safety critical embedded systems the correctness of the processor, toolchain and compiler is an important issue. Translation validation is one approach for compiler verification. A common semantic framework to represent source and target language ...

Roland Lezuo; Andreas Krall

2012-06-01T23:59:59.000Z

154

Interprocessor communication speed and performance in distributed-memory parallel processors  

Science Conference Proceedings (OSTI)

We have simulated several numerical and non-numerical algorithms on five distributed-memory parallel processors (DMPPs). All five DMPPs have the same topology (a torus), and the same number of nodes. The architectures differ only in the communication ...

M. Annaratone; C. Pommerell; R. Rühl

1989-04-01T23:59:59.000Z

155

An effective network processor design framework: using multi-objective evolutionary algorithms and object oriented techniques to optimise the intel IXP1200 network processor  

Science Conference Proceedings (OSTI)

In this paper we present a framework for design space exploration of a network processor, that incorporates parameterisation, power and cost analysis. This method utilises multi-objective evolutionary algorithms and object oriented analysis and design. ... Keywords: design space exploration, evolutionary approaches, object oriented

Liam Noonan; Colin Flanagan

2006-12-01T23:59:59.000Z

156

Evaluation of soft-core processors on a Xilinx Virtex-5 field programmable gate array.  

SciTech Connect

Node-based architecture (NBA) designs for future satellite projects hold the promise of decreasing system development time and costs, size, weight, and power and positioning the laboratory to address other emerging mission opportunities quickly. Reconfigurable field programmable gate array (FPGA)-based modules will comprise the core of several of the NBA nodes. Microprocessing capabilities will be necessary with varying degrees of mission-specific performance requirements on these nodes. To enable the flexibility of these reconfigurable nodes, it is advantageous to incorporate the microprocessor into the FPGA itself, either as a hard-core processor built into the FPGA or as a soft-core processor built out of FPGA elements. This document describes the evaluation of three reconfigurable FPGA-based soft-core processors for use in future NBA systems: the MicroBlaze (uB), the open-source Leon3, and the licensed Leon3. Two standard performance benchmark applications were developed for each processor. The first, Dhrystone, is a fixed-point operation metric. The second, Whetstone, is a floating-point operation metric. Several trials were run at varying code locations, loop counts, processor speeds, and cache configurations. FPGA resource utilization was recorded for each configuration.

Learn, Mark Walter

2011-04-01T23:59:59.000Z

157

Proceedings of symposium on operation and maintenance of synthetic gas plants  

SciTech Connect

The Symposium on Operation and Maintenance of Synthetic Gas Plants sponsored by the Gas Processors Association and the American Petroleum Institute (Division of Refining) was held at the Statler Hilton Hotel, Dallas, Texas, October 10, 1973. Four papers have been entered individually into EDB. (LTN)

1973-01-01T23:59:59.000Z

158

Evaluating the Effect of Data-Reuse Transformations on Processor Power Consumption  

E-Print Network (OSTI)

. Processor power savings that can be obtained by the application of data-reuse transformations on multimedia applications are discussed in this paper. Data Transfer and Storage Exploration methodologies primarily aim at memory related power reduction by moving data accesses to smaller memories, which are less power costly. However, it is shown that the applied code transformations have also a significant effect on the processor power consumption. Physical measurements of the average current drawn by instruction sequences provide a way to evaluate the processor power consumption of alternative code implementations. Simulation results prove that code transformations based on memory hierarchy exploration can have a significantly larger impact on power than existing software energy optimizing methodologies. 1

Alexander Chatzigeorgiou; Er Chatzigeorgiou; Stamatiki Kougia; Spiridon Nikolaidis

2001-01-01T23:59:59.000Z

159

Interconnection arrangement of routers of processor boards in array of cabinets supporting secure physical partition  

DOE Patents (OSTI)

A multiple processor computing apparatus includes a physical interconnect structure that is flexibly configurable to support selective segregation of classified and unclassified users. The physical interconnect structure includes routers in service or compute processor boards distributed in an array of cabinets connected in series on each board and to respective routers in neighboring row cabinet boards with the routers in series connection coupled to routers in series connection in respective neighboring column cabinet boards. The array can include disconnect cabinets or respective routers in all boards in each cabinet connected in a toroid. The computing apparatus can include an emulator which permits applications from the same job to be launched on processors that use different operating systems.

Tomkins, James L. (Albuquerque, NM); Camp, William J. (Albuquerque, NM)

2007-07-17T23:59:59.000Z

160

Test Time Reduction Reusing Multiple Processors in a Network-on-Chip Based Architecture  

E-Print Network (OSTI)

The increasing complexity and the short life cycles of embedded systems are pushing the current system-on-chip designs towards a rapid increasing on the number of programmable processing units, while decreasing the gate count for custom logic. Considering this trend, this work proposes a test planning method capable of reusing available processors as test sources and sinks, and the on-chip network as the test access mechanism. Experimental results are based on ITC'02 benchmarks and on two open core processors compliant with MIPS and SPARC instruction set. The results show that the cooperative use of both the on-chip network and the embedded processors can increase the test parallelism and reduce the test time without additional cost in area and pins.

Amory, Alexandre M; Moraes, Fernando G; Moreno, Edson I

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "gas processors associa" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Implementation of a sampled receiver using TMS320C30 signal processor  

E-Print Network (OSTI)

Advances in digital signal processors have prompted the development of various algorithms for use in all digital data receivers. This thesis discusses the implementation of a joint detection and symbol synchronization algorithm using two Texas Instruments TMS32OC30 (C30) Digital Signal Processors, one as a transmitter of digital data, and another as a sampled receiver used to implement the algorithm. It is shown that when using raised cosine pulses for transmission of symbols, and sampling of these symbols is at least 4 times above the Nyquist rate, the performance results using the TMS32OC30 Digital Signal Processor coincide with those theoretically derived. Furthermore, it is also shown that the timing estimate produced by the algorithm can be used to compensate for differing transmitter/receiver clock rates.

Van Slyke, Braddon Michael

1996-01-01T23:59:59.000Z

162

Navy real-time signal processor development: second generation planned service standard  

SciTech Connect

The author describe the development of the enhanced modular signal processor (EMSP) as a multi-processor signal processing system. The approach to specifying system performance and programming environment along with an acquisition approach meant to encourage vigorous competition for the engineering development contract award is discussed. The commodity management concept for EMSP's in-service lifetime involves interface management within the system and controlled technology infusion. This important plan to stay abreast of technology and to meet user community requirements for product stability is described. 2 references.

Robbins, C.B.

1981-01-01T23:59:59.000Z

163

Packet-switched intercommunication network for distributed memory, parallel processor computers  

DOE Patents (OSTI)

The Lambda network is a single stage, packet-switched interprocessor communication network for a distributed memory, parallel processor computer. Its design arises from the desired network characteristics of minimizing mean and maximum packet transfer time, local routing, expandability, deadlock avoidance, and fault tolerance. The network is based on fixed degree nodes and has O(log[sub 2n]) mean and maximum packet transfer distances where n is the number of processors. The routing method is detailed, as are methods for expandability, deadlock avoidance, and fault tolerance.

Napolitano, L.M. Jr.

1990-01-01T23:59:59.000Z

164

Packet-switched intercommunication network for distributed memory, parallel processor computers  

DOE Patents (OSTI)

The Lambda network is a single stage, packet-switched interprocessor communication network for a distributed memory, parallel processor computer. Its design arises from the desired network characteristics of minimizing mean and maximum packet transfer time, local routing, expandability, deadlock avoidance, and fault tolerance. The network is based on fixed degree nodes and has O(log{sub 2n}) mean and maximum packet transfer distances where n is the number of processors. The routing method is detailed, as are methods for expandability, deadlock avoidance, and fault tolerance.

Napolitano, L.M. Jr.

1990-12-31T23:59:59.000Z

165

IdlePower: Application-Aware Management of Processor Idle States Hrishikesh Amur Ripal Nathuji Mrinmoy Ghosh  

E-Print Network (OSTI)

is that the processor is unable to transition to a power-saving deep C-state. 60. 65. 70. 75. 80. 85. 90. 95. 100. 0 1 2IdlePower: Application-Aware Management of Processor Idle States Hrishikesh Amur Ripal Nathuji. With careful adaptation schemes, the system can save power by entering different idle states dynamically

Lee, Hsien-Hsin "Sean"

166

Efficient parallel architecture for multi-level forward discrete wavelet transform processors  

Science Conference Proceedings (OSTI)

A resource efficient and high-performance architecture for a two-dimensional multi-level discrete wavelet transform processor is presented in this paper. The JPEG2000 standard integer lossless 5-3 filter has been implemented. It achieves optimal hardware ...

Syed Mahfuzul Aziz; Duc Minh Pham

2012-09-01T23:59:59.000Z

167

On Sojourn Times in the Finite Capacity $M/M/1$ Queue with Processor Sharing  

E-Print Network (OSTI)

We consider a processor shared $M/M/1$ queue that can accommodate at most a finite number $K$ of customers. We give an exact expression for the sojourn time distribution in the finite capacity model, in terms of a Laplace transform. We then give the tail behavior, for the limit $K\\to\\infty$, by locating the dominant singularity of the Laplace transform.

Zhen, Qiang

2009-01-01T23:59:59.000Z

168

A pre- and post-processor for the ICOOL muon transport code  

SciTech Connect

ICOOL[1] is a Fortran77 macroparticle transport code widely used by researchers to study the front end of a neutrino factory/muon collider[2]. In part due to the desire that ICOOL be usable over multiple computer platforms and operating systems, the code uses simple text files for input/output services. This choice together with user-driven requests for greater and greater choice of lattice element type and configuration has led to ICOOL input decks becoming rather difficult to compose and modify easily. Moreover, the lack of a standard graphical post-processor has prevented many ICOOL users from extracting all but the most simple results from the output files. Here I present two attempts to improve this situation: First, a simple but quite general graphical pre-processor (NIME) written in the Tcl/TK[3] to permit users to write and maintain ASCII-formatted input files by use of simple macro definitions and expansions. Second, an interactive post-processor written in Fortran90 and NCAR graphics, which allows users to define, extract, and then examine the behavior of various particle subsets. In this paper I show some examples of use of both the pre- and post-processor for a standard ICOOL run.

Fawley, W.M.

2001-05-30T23:59:59.000Z

169

Analysis of High-level Address Code Transformations for Programmable Processors  

E-Print Network (OSTI)

- imisation complemented with loop-invariant code hoisting, and non-linear operator strength reduction a crucial bottleneck in the overall system performance. To handle this complex arithmetic special hardware units have been used in processors, which may be either programmable or custom hardware[1, 2]. Custom

Gupta, Rajesh

170

CAeSaR: unified cluster-assignment scheduling and communication reuse for clustered VLIW processors  

Science Conference Proceedings (OSTI)

Clustered architectures have been proposed as a solution to the scalability problem of wide ILP processors. VLIW architectures, being wide-issue by design, benefit significantly from clustering. Such architectures, being both statically scheduled and ... Keywords: cluster assignment, clustered VLIW, instruction scheduling

Vasileios Porpodas; Marcelo Cintra

2013-09-01T23:59:59.000Z

171

Ideas on a 1st level multi-track r-phi vertex trigger processor  

E-Print Network (OSTI)

97-06 The implementation of a microvertex trigger with a R-Phi strip geometry for detecting B meson decay vertices has been proposed in the LHCb progress report [Ref. 1]. This report reviews the implementation ideas for 1st level vertex trigger including stip readout, hardware linefinding and technologies to implement a vertex processor operating at 1 Mhz input rate.

Buytaert, J; Jost, B; Müller, H; Ruf, T; Ruf, Thomas

1997-01-01T23:59:59.000Z

172

Improving grid performance through processor allocation considering both speed heterogeneity and resource fragmentation  

Science Conference Proceedings (OSTI)

Grid performance are usually measured by the average turnaround time of all jobs in the system. A job's turnaround time consists of two parts: queue waiting time and actual execution time, which in a heterogeneous grid environment, are severely affected ... Keywords: Grid, Processor allocation, Resource fragmentation, Speed heterogeneity

Po-Chi Shih; Kuo-Chan Huang; Yeh-Ching Chung

2012-06-01T23:59:59.000Z

173

A generic network interface architecture for a networked processor array (NePA)  

Science Conference Proceedings (OSTI)

Recently Network-on-Chip (NoC) technique has been proposed as a promising solution for on-chip interconnection network. However, different interface specification of integrated components raises a considerable difficulty for adopting NoC techniques. ... Keywords: interconnection network, multiprocessor systemon-chip (MPSoC), network interface, network-on-chip (NoC), networked processor array (NePA)

Seung Eun Lee; Jun Ho Bahn; Yoon Seok Yang; Nader Bagherzadeh

2008-02-01T23:59:59.000Z

174

A New Thermal-Conscious System-Level Methodology for Energy-Efficient Processor Voltage Selection  

E-Print Network (OSTI)

A New Thermal-Conscious System-Level Methodology for Energy-Efficient Processor Voltage Selection a thermal-conscious system-level methodology to make energy-efficient voltage selection (VS) for nanometer), thermal resistance, are integrated and considered in our system models, and their impacts on energy

Wang, Yu

175

Hard Real-Time Garbage Collection for a Java Chip Multi-Processor  

E-Print Network (OSTI)

or hard copies of all or part of this work for personal or classroom use is granted without fee provided, these approaches implement substantial parts or all of the garbage collector in hard- ware. In contrast, ourHard Real-Time Garbage Collection for a Java Chip Multi-Processor Wolfgang Puffitsch Institute

176

Hard Real-Time Garbage Collection on Chip Multi-Processors  

E-Print Network (OSTI)

Hard Real-Time Garbage Collection on Chip Multi-Processors DISSERTATION submitted in partial are however not suited for use in hard real-time systems. As a failure in these systems can have catastrophic of the respective system. In the past few years, methods for garbage collection that are suitable for use in hard

177

The Red Storm Architecture and Early Experiences with Multi-Core Processors  

Science Conference Proceedings (OSTI)

The Red Storm architecture, which was conceived by Sandia National Laboratories and implemented by Cray, Inc., has become the basis for most successful line of commercial supercomputers in history. The success of the Red Storm architecture is due largely ... Keywords: High-Performance Computing, Large-Scale Computers, Massively Parallel Processor, Multiprocessing Systems, Parallel Processing Systems, Supercomputers

Ron Brightwell; William J. Camp; Sudip Dosanjh; Suzanne M. Kelly; John Levesque; Paul T. Lin; Vinod Tipparaju; Courtenay T. Vaughan; James L. Tomkins

2010-04-01T23:59:59.000Z

178

Flexible Compiler-Managed L0 Buffers for Clustered VLIW Processors  

Science Conference Proceedings (OSTI)

Wire delays are a major concern for current and forthcoming processors.One approach to attack this problem is to divide the processorinto semi-independent units referred to as clusters. Acluster usually consists of a local register file and a subset ...

Enric Gibert; Jesús Sánchez; Antonio González

2003-12-01T23:59:59.000Z

179

Evaluation of the SUN UltraSparc T2+ Processor for Computational Science  

Science Conference Proceedings (OSTI)

The Sun UltraSparc T2+ processor was designed for throughput computing and thread level parallelism. In this paper we evaluate its suitability for computational science. A set of benchmarks representing typical building blocks of scientific applications ... Keywords: Computational Science, Evaluation, Niagara2, Sun UltraSparc T2+

Martin Sandrieser; Sabri Pllana; Siegfried Benkner

2009-05-01T23:59:59.000Z

180

Vorton dynamics: a case study of developing a fluid dynamics model for a vector processor  

Science Conference Proceedings (OSTI)

The raw performance of vector processors such as the CDC CYBER-205 has been well documented. The ability to apply this raw power to ever more complex algebraic algorithms has been reported in [9]. The final step in making computers of this class truly ... Keywords: CYBER-205, computational fluid dynamics, programming, vorton model

M. J. Kascic, Jr.

1984-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "gas processors associa" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Power Consumption Reduction Explorations in Processors by Enhancing Performance Using Small ESL Reprogrammable eFPGAs  

Science Conference Proceedings (OSTI)

Power consumption has become the biggest challenge in industry for chip design. We will present that by using small reprogrammable embedded FPGAs (eFPGA) coupled with a processor we can achieve power and energy reduction with a very small silicon overhead. ... Keywords: embedded FPGA, Power Consumption, Reconfigurable computing, MIPS, eFPGA accelerator

Syed Zahid Ahmed; Julien Eydoux; Michael Fernandez; Laurent Rougé; Gilles Sassatelli; Lionel Torres

2008-12-01T23:59:59.000Z

182

Converting massive TLP to DLP: a special-purpose processor for molecular orbital computations  

Science Conference Proceedings (OSTI)

We propose an application specific processor for computational quantum chemistry. The kernel of interest is the computation of electron repulsion integrals (ERIs), which vary in control flow with different input data. This lack of uniformity limits the ... Keywords: address generation, content-addressable memory, data-level parallelism, thread-level parallelism, vector processing

Tirath Ramdas; Gregory K. Egan; David Abramson; Kim Baldridge

2007-05-01T23:59:59.000Z

183

ThermOS: system support for dynamic thermal management of chip multi-processors  

Science Conference Proceedings (OSTI)

Constraining the temperature of computing systems has become a dominant aspect in the design of integrated circuits. The supply voltage decrease has lost its pace even though the feature size is shrinking constantly. This results in an increased number ... Keywords: CMP, DTM, OS, chip multi-processor, chip-multiprocessor, dynamic thermal management, multi-core, multicore, operating system

Filippo Sironi, Martina Maggio, Riccardo Cattaneo, Giovanni Francesco Del Nero, Donatella Sciuto, Marco Domenico Santambrogio

2013-10-01T23:59:59.000Z

184

A survey on hardware-aware and heterogeneous computing on multicore processors and accelerators  

Science Conference Proceedings (OSTI)

In the last few years, the landscape of parallel computing has been subject to profound and highly dynamic changes. The paradigm shift towards multicore and manycore technologies coupled with accelerators in a heterogeneous environment is offering a ... Keywords: accelerators, hardware-aware computing, heterogeneity, multicore and manycore processors, numerical simulation, parallel programming

Rainer Buchty; Vincent Heuveline; Wolfgang Karl; Jan-Philipp Weiss

2012-05-01T23:59:59.000Z

185

Parallelization of XPath queries using multi-core processors: challenges and experiences  

Science Conference Proceedings (OSTI)

In this study, we present experiences of parallelizing XPath queries using the Xalan XPath engine on shared-address space multi-core systems. For our evaluation, we consider a scenario where an XPath processor uses multiple threads to concurrently navigate ...

Rajesh Bordawekar; Lipyeow Lim; Oded Shmueli

2009-03-01T23:59:59.000Z

186

A dual-processor solution for the MAC layer of a software defined radio terminal  

Science Conference Proceedings (OSTI)

Considerable work has been devoted to studying flexible computation structures for the physical layer of a software defined radio (SDR) terminal. However there has been almost no research on protocol processors for the upper layer protocols such as the ... Keywords: SDR terminal, protocol processing, wireless platform

Hyunseok Lee; Trevor Mudge

2005-09-01T23:59:59.000Z

187

Microwave tomography for breast cancer detection on Cell broadband engine processors  

Science Conference Proceedings (OSTI)

Microwave tomography (MT) is a safe screening modality that can be used for breast cancer detection. The technique uses the dielectric property contrasts between different breast tissues at microwave frequencies to determine the existence of abnormalities. ... Keywords: Breast cancer detection, Cell BE processor, Finite-difference time-domain (FDTD), Microwave tomography (MT)

Meilian Xu; Parimala Thulasiraman; Sima Noghanian

2012-09-01T23:59:59.000Z

188

The RISC processor module for FASTBUS computation applications. Final technical report  

SciTech Connect

The FASTBUS system specification for high-energy physics and other data-system applications anticipates the use of multiple, high-performance processor modules for data control and event reduction associated with experiments in the physical sciences. Existing processor designs will be unable to cope with the projected data-reduction and event-handling requirements of the complex experiments planned for the next generation of particle accelerators. Data-handling strategies for experimental physics are evolving from systems based upon a single central computer to those with arrays of high-speed, sophisticated, front-end processing elements. The advent of accelerators such as LEP and LHC, and beyond, is forcing the architecture of these processors toward the simpler RISC designs to enhance both speed and the software-development issue. This report describes the prototype development of a FASTBUS RISC Processor Module (FRPM) for use as a standard processing element in FASTBUS data-acquisition systems under a Phase II SBIR grant through the U.S. Department of Energy, Division of Energy Research. The FRPM hosts a reduced instruction set computer--the SPARCengine-2 by Sun Microcomputer Systems, Inc.--capable of executing 4.2 million floating point instructions per second with a clock of up to 40 MHz. The prototype FRPM supports a port to the FASTBUS crate segment by way of a standard-logic interface. The FRPM processor operates under a commercially available real-time operating system, and application software can be developed on workstation and mainframe computer systems. We further cover the chronology of the Phase II work, a discussion of the objectives, and our experiences with an ASIC manufacturer in attempting to complete the fabrication of a chip implementing the FASTBUS Master Interface (FMI).

NONE

1996-02-01T23:59:59.000Z

189

ARM: Millimeter Wave Cloud Radar (MMCR), replaces mmcrcal and mmcrmoments datastreams following C-40 processor upgrade of 2003.09.09  

DOE Data Explorer (OSTI)

Millimeter Wave Cloud Radar (MMCR), replaces mmcrcal and mmcrmoments datastreams following C-40 processor upgrade of 2003.09.09

Kevin Widener; Nitin Bharadwaj; Karen Johnson

190

Autothermal and partial oxidation reformer-based fuel processor, method for improving catalyst function in autothermal and partial oxidation reformer-based processors  

DOE Patents (OSTI)

The invention provides a fuel processor comprising a linear flow structure having an upstream portion and a downstream portion; a first catalyst supported at the upstream portion; and a second catalyst supported at the downstream portion, wherein the first catalyst is in fluid communication with the second catalyst. Also provided is a method for reforming fuel, the method comprising contacting the fuel to an oxidation catalyst so as to partially oxidize the fuel and generate heat; warming incoming fuel with the heat while simultaneously warming a reforming catalyst with the heat; and reacting the partially oxidized fuel with steam using the reforming catalyst.

Ahmed, Shabbir; Papadias, Dionissios D.; Lee, Sheldon H. D.; Ahluwalia, Rajesh K.

2013-01-08T23:59:59.000Z

191

NOAA Awarded 2.6 Million Processor Hours at NERSC to Run Climate Change  

NLE Websites -- All DOE Office Websites (Extended Search)

NOAA Awarded 2.6 NOAA Awarded 2.6 Million Processor Hours at NERSC to Run Climate Change Models NOAA Awarded 2.6 Million Processor Hours at NERSC to Run Climate Change Models September 11, 2008 WASHINGTON, DC - The U.S. Department of Energy's (DOE) Office of Science will make available more than 10 million hours of computing time for the U.S. Commerce Department's National Oceanic and Atmospheric Administration (NOAA) to explore advanced climate change models at three of DOE's national laboratories as part of a three-year memorandum of understanding on collaborative climate research signed today by the two agencies. NOAA will work with climate change models as well as perform near real-time high-impact (non-production) weather prediction research using computing time on DOE Office of Science resources including two of the world's top

192

Large scale integration based, signal processor-its application and possible evolution  

Science Conference Proceedings (OSTI)

The micro-vector processor (MVP) is designed for applications ranging from expendable single-processor weapons and buoys to large multiprocessor federated systems. Multiple applications, easy reprogrammability, and low-power operation were achieved with an architecture that provides high throughput at moderate clock rates and maximum use of lsi circuts. The MVP software design includes support for both application programming in high-level language and implementation of signal-processing algorithms in a symbolic microprogramming language. These two programmability levels reduce software costs for new applications and for changing requirements. Two examples are used to illustrate MVP applications: cruise missile guidance and a multichannel acoustic beamformer. The MVP architecture, or some close derivative, is considered suitable for reimplementation in very large-scale integration. 2 references.

Harland, W.L.; Carvell, R. Jr.

1981-01-01T23:59:59.000Z

193

Survey of ANL organization plans for word processors, personal computers, workstations, and associated software  

SciTech Connect

The Computing and Telecommunications Division (CTD) has compiled this Survey of ANL Organization Plans for Word Processors, Personal Computers, Workstations, and Associated Software to provide DOE and Argonne with a record of recent growth in the acquisition and use of personal computers, microcomputers, and word processors at ANL. Laboratory planners, service providers, and people involved in office automation may find the Survey useful. It is for internal use only, and any unauthorized use is prohibited. Readers of the Survey should use it as a reference that documents the plans of each organization for office automation, identifies appropriate planners and other contact people in those organizations, and encourages the sharing of this information among those people making plans for organizations and decisions about office automation. The Survey supplements information in both the ANL Statement of Site Strategy for Computing Workstations and the ANL Site Response for the DOE Information Technology Resources Long-Range Plan.

Fenske, K.R.

1991-11-01T23:59:59.000Z

194

Survey of ANL organization plans for word processors, personal computers, workstations, and associated software. Revision 3  

SciTech Connect

The Computing and Telecommunications Division (CTD) has compiled this Survey of ANL Organization Plans for Word Processors, Personal Computers, Workstations, and Associated Software to provide DOE and Argonne with a record of recent growth in the acquisition and use of personal computers, microcomputers, and word processors at ANL. Laboratory planners, service providers, and people involved in office automation may find the Survey useful. It is for internal use only, and any unauthorized use is prohibited. Readers of the Survey should use it as a reference that documents the plans of each organization for office automation, identifies appropriate planners and other contact people in those organizations, and encourages the sharing of this information among those people making plans for organizations and decisions about office automation. The Survey supplements information in both the ANL Statement of Site Strategy for Computing Workstations and the ANL Site Response for the DOE Information Technology Resources Long-Range Plan.

Fenske, K.R.

1991-11-01T23:59:59.000Z

195

T-631: Cisco XR 12000 Series Shared Port Adapters Interface Processor  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

31: Cisco XR 12000 Series Shared Port Adapters Interface 31: Cisco XR 12000 Series Shared Port Adapters Interface Processor Vulnerability T-631: Cisco XR 12000 Series Shared Port Adapters Interface Processor Vulnerability May 26, 2011 - 3:35pm Addthis PROBLEM: A vulnerability was reported in Cisco IOS XR 12000. A remote user can cause denial of service conditions. PLATFORM: This vulnerability affects any device that is running Cisco IOS XR Software Releases 3.9.0, 3.9.1, 3.9.2, 4.0.0, 4.0.1, 4.0.2, or 4.1.0 and has a SPA interface processor installed. Vulnerability affects all Engine 5 Line Cards on the Cisco XR 12000 Series Routers. The engine 5 line cards are the SIP-600, SIP-601, SIP-501, and SIP-401. ABSTRACT: This vulnerability affects any device that is running affected releases of Cisco IOS XR Software and has an IPv4 address configured on any of the SPA

196

T-631: Cisco XR 12000 Series Shared Port Adapters Interface Processor  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1: Cisco XR 12000 Series Shared Port Adapters Interface 1: Cisco XR 12000 Series Shared Port Adapters Interface Processor Vulnerability T-631: Cisco XR 12000 Series Shared Port Adapters Interface Processor Vulnerability May 26, 2011 - 3:35pm Addthis PROBLEM: A vulnerability was reported in Cisco IOS XR 12000. A remote user can cause denial of service conditions. PLATFORM: This vulnerability affects any device that is running Cisco IOS XR Software Releases 3.9.0, 3.9.1, 3.9.2, 4.0.0, 4.0.1, 4.0.2, or 4.1.0 and has a SPA interface processor installed. Vulnerability affects all Engine 5 Line Cards on the Cisco XR 12000 Series Routers. The engine 5 line cards are the SIP-600, SIP-601, SIP-501, and SIP-401. ABSTRACT: This vulnerability affects any device that is running affected releases of Cisco IOS XR Software and has an IPv4 address configured on any of the SPA

197

Energy optimization of Application-Specific Instruction-Set Processors by using hardware accelerators in semicustom ICs technology  

Science Conference Proceedings (OSTI)

The increasing complexity of applications with a decreasing time-to-market requirement has created a strong interest in both high-performance and flexible embedded processors with a strong consideration for battery life. Low-power optimizations are therefore ... Keywords: Application-Specific Instruction-Set Processors (ASIPs), Architecture Description Languages (ADLs), Cell-based IC (CBIC), Field Programmable Gate Arrays (FPGA), Language for Instruction Set Architecture (LISA), Wavelets

Uwe Meyer-Baese; Guillermo Botella; Soumak Mookherjee; Encarnación Castillo; Antonio García

2012-03-01T23:59:59.000Z

198

NETL: Oil & Natural Gas Projects  

NLE Websites -- All DOE Office Websites (Extended Search)

Deep Trek Re-configurable Processor for Data Acquisition Deep Trek Re-configurable Processor for Data Acquisition DE-FC26-06NT42947 Goal The goal of this project is to develop and qualify a Re-configurable Processor for Data Acquisition (RPDA) by packaging previously developed components in an advanced high-temperature Multi-Chip Module (MCM), and by developing configuration software that may be embedded within the RPDA to link data-acquisition system Analog Front-Ends to digital system busses. Performer Honeywell International Inc., Plymouth, MN 55441 Background Electronic data acquisition systems are necessary to make deep oil and gas drilling and production cost effective, yet the basic electronic components from which such systems are built will not operate reliably at the high temperatures encountered in deep wells. As well depths increase beyond 15,000 feet, temperatures above 200°C are relatively common. In some cases the target reservoir temperature may be as high as 300°C.

199

An Investigation into Reliability, Availability, and Serviceability (RAS) Features for Massively Parallel Processor Systems  

SciTech Connect

A study has been completed into the RAS features necessary for Massively Parallel Processor (MPP) systems. As part of this research, a use case model was built of how RAS features would be employed in an operational MPP system. Use cases are an effective way to specify requirements so that all involved parties can easily understand them. This technique is in contrast to laundry lists of requirements that are subject to misunderstanding as they are without context. As documented in the use case model, the study included a look at incorporating system software and end-user applications, as well as hardware, into the RAS system.

KELLY, SUZANNE M.; OGDEN, JEFFREY BRANDON

2002-10-01T23:59:59.000Z

200

New York University (NYU) ultracomputer-a general-purpose parallel processor  

SciTech Connect

The authors present the design for a MIMD parallel processor composed of thousands of autonomous elements. This machine uses an enhanced omega-network to approximate the ideal behavior of Schwartz's paracomputer model of computation and to implement efficiently the important replace-add synchronization primitive. The novelty of the design lies in the enhanced network, particularly in the constituent switches and interfaces. The results of analytic and simulation studies of the network are accompanied by a sample of efforts to implement parallel variants of important scientific codes. 15 references.

Gottlieb, A.; Grishman, R.; Kruskal, C.P.; Mcauliffe, K.P.; Rudolph, L.; Snir, M.

1981-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "gas processors associa" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Information coding of exciting laser pulses in an optical echo-processor  

SciTech Connect

We report the possibility of controlling the distribution of quantum bits within an inhomogeneously broadened line of a resonant transition in recording and transforming information in optical echo-processors. We consider the efficiency of realisation of the elementary logic XOR gate based on a two-pulse excitation of a resonant medium with phase memory. The encoded information is incorporated into the temporal shape of laser pulses in the form of amplitude modulation of an 'echelon' of present ('1') and absent ('0') pulse-codes for obtaining more efficient logic elements that reduce the noise in a quantum communication channel. (optical information processing)

Rusanova, I A [Kazan (Volga Region) Federal University, Kazan (Russian Federation)] [Kazan (Volga Region) Federal University, Kazan (Russian Federation)

2013-07-31T23:59:59.000Z

202

Parallel Agent-Based Simulations on Clusters of GPUs and Multi-Core Processors  

SciTech Connect

An effective latency-hiding mechanism is presented in the parallelization of agent-based model simulations (ABMS) with millions of agents. The mechanism is designed to accommodate the hierarchical organization as well as heterogeneity of current state-of-the-art parallel computing platforms. We use it to explore the computation vs. communication trade-off continuum available with the deep computational and memory hierarchies of extant platforms and present a novel analytical model of the tradeoff. We describe our implementation and report preliminary performance results on two distinct parallel platforms suitable for ABMS: CUDA threads on multiple, networked graphical processing units (GPUs), and pthreads on multi-core processors. Message Passing Interface (MPI) is used for inter-GPU as well as inter-socket communication on a cluster of multiple GPUs and multi-core processors. Results indicate the benefits of our latency-hiding scheme, delivering as much as over 100-fold improvement in runtime for certain benchmark ABMS application scenarios with several million agents. This speed improvement is obtained on our system that is already two to three orders of magnitude faster on one GPU than an equivalent CPU-based execution in a popular simulator in Java. Thus, the overall execution of our current work is over four orders of magnitude faster when executed on multiple GPUs.

Aaby, Brandon G [ORNL; Perumalla, Kalyan S [ORNL; Seal, Sudip K [ORNL

2010-01-01T23:59:59.000Z

203

Ruslands Gas.  

E-Print Network (OSTI)

??This paper is about Russian natural gas and the possibility for Russia to use its reserves of natural gas politically towards the European Union to… (more)

Elkjær, Jonas Bondegaard

2009-01-01T23:59:59.000Z

204

The exigency of benchmark and compiler drift: Designing tomorrow’s processors with yesterday’s tools  

E-Print Network (OSTI)

Due to the amount of time required to design a new processor, one set of benchmark programs may be used during the design phase while another may be the standard when the design is finally delivered. Using one benchmark suite to design a processor while using a different, presumably more current, suite to evaluate its ultimate performance may lead to sub-optimal design decisions if there are large differences between the characteristics of the two suites and their respective compilers. We call this change across time “drift”. To evaluate the impact of using yesterday’s benchmark and compiler technology to design tomorrow’s processors, we compare common benchmarks from the SPEC 95 and SPEC 2000 benchmark suites. Our results yield three key conclusions. First, we show that the amount of drift, for common programs in successive SPEC benchmark suites, is significant. In

Joshua J. Yi; Hans Vandierendonck; Lieven Eeckhout; David J. Lilja

2006-01-01T23:59:59.000Z

205

User's Guide to PreComp (Pre-Processor for Computing Composite Blade Properties)  

DOE Green Energy (OSTI)

PreComp (Pre-processor for computing Composite blade structural properties) was developed to compute the stiffness and inertial properties of a composite blade. The code may also be used to compute the structural properties of a metallic blade by treating it as a special case of an isotropic composite material. This guide provides step-by-step instructions on how to prepare input files (specify blade external geometry and internal structural layup of composite laminates), how to execute the code, and how to interpret the output properties. PreComp performs extensive checks for completeness, range, and viability of input data; these are also discussed in this manual. The code runs fast, usually in a fraction of a second, and requires only a modest knowledge of the composites and laminates schedule typically used in blades.

Bir, G. S.

2006-01-01T23:59:59.000Z

206

Performance-Aware Power Management in Embedded Controllers with Multiple-Voltage Processors  

E-Print Network (OSTI)

The goal of this work is to minimize the energy dissipation of embedded controllers without jeopardizing the quality of control (QoC). Taking advantage of the dynamic voltage scaling (DVS) technology, this paper develops a performance-aware power management scheme for embedded controllers with processors that allow multiple voltage levels. The periods of control tasks are adapted online with respect to the current QoC, thus facilitating additional energy reduction over standard DVS. To avoid the waste of CPU resources as a result of the discrete voltage levels, a resource reclaiming mechanism is employed to maximize the CPU utilization and also to improve the QoC. Simulations are conducted to evaluate the performance of the proposed scheme. Compared with the optimal standard DVS scheme, the proposed scheme is shown to be able to save remarkably more energy while maintaining comparable QoC.

Xia, Feng; Ma, Longhua; Sun, Youxian; Dong, Jinxiang

2008-01-01T23:59:59.000Z

207

Operation of commercial R3000 processors in the Low Earth Orbit (LEO) space environment  

SciTech Connect

Spacecraft processors must operate with minimal degradation of performance in the Low Earth Orbit (LEO) radiation environment, which includes the effects of total accumulated ionizing dose and Single Event Phenomena (SEP) caused by protons and cosmic rays. Commercially available microprocessors can offer a number of advantages relative to radiation-hardened devices, including lower cost, reduced development and procurement time, extensive software support, higher density and performance. However, commercially available systems are not normally designed to tolerate effects induced by the LEO environment. Lawrence Livermore National Laboratory (LLNL) and others have extensively tested the MIPS R3000 Reduced Instruction Set Computer (RISC) microprocessor family for operation in LEO environments. We have characterized total dose and SEP effects for altitudes and inclinations of interest to systems operating in LEO, and we postulate techniques for detection and alleviation of SEP effects based on experimental results. 12 refs.

Kaschmitter, J.L.; Shaeffer, D.L.; Colella, N.J. [Lawrence Livermore National Lab., CA (United States); McKnett, C.L.; Coakley, P.G. [JAYCOR, Santa Monica, CA (United States)

1990-08-09T23:59:59.000Z

208

Single event effects and performance predictions for space applications of RISC processors  

Science Conference Proceedings (OSTI)

Proton and ion Single Event Phenomena (SEP) tests were performed on 32-b processors including R3000A's from all commercial manufacturers along with the Performance PR3400 family, Integrated Device Technology Inc. 79R3081, LSI Logic Corporation LR33000HC, and Intel i80960MX parts. The microprocessors had acceptable upset rates for operation in a low earth orbit or a lunar mission such as CLEMENTINE with a wide range in proton total dose failure. Even though R3000A devices are 60% smaller in physical area than R3000 devices, there was a 340% increase in device Single Event Upset (SEU) cross section. Software tests of varying complexity demonstrate that registers and other functional blocks using register architecture dominate the cross section. The current approach of giving a single upset cross section can lead to erroneous upset rates depending on the application software.

Kimbrough, J.R.; Colella, N.J.; Denton, S.M.; Shaeffer, D.L.; Shih, D.; Wilburn, J.W. (Lawrence Livermore National Lab., CA (United States)); Coakley, P.G. (JAYCOR, San Diego, CA (United States)); Casteneda, C. (Crocker Nuclar Lab., Davis, CA (United States)); Koga, R. (Aerospace Corp., El Segundo, CA (United States)); Clark, D.A.; Ullmann, J.L. (Los Alamos National Lab., NM (United States))

1994-12-01T23:59:59.000Z

209

Operation of commercial R3000 processors in the low earth orbit (LEO) space environment  

SciTech Connect

Spacecraft processors must operate with minimal degradation of performance in the Low Earth Orbit (LEO) radiation environment, which includes the effects of total accumulated ionizing dose and Single Event Phenomena (SEP) caused by protons and cosmic rays. Commercially available microprocessors can offer a number of advantages relative to radiation-hardened devices, including lower cost, reduced development and procurement time, extensive software support, higher density and performance. However, commercially available systems are not normally designed to tolerate effects induced by the LEO environments. Lawrence Livermore National Laboratory (LLNL) and others have extensively tested the MIPS R3000 Reduced Instruction Set Computer (RISC) microprocessor family for operation in LEO environments. In this paper the authors characterize total dose and SEP effects for altitudes and inclinations of interest to systems operating in LEO, and the authors postulate techniques for detection and alleviation of SEP effects based on experimental results.

Kaschmitter, J.L.; Shaeffer, D.L.; Colella, N.J. (Lawrence Livermore National Lab., CA (United States)); McKnett, C.L.; Coakley, P.G. (JAYCOR, Santa Monica, CA (United States))

1991-12-01T23:59:59.000Z

210

Leakage-Aware Reallocation for Periodic Real-Time Tasks on Multicore Processors  

E-Print Network (OSTI)

It is an increasingly important issue to reduce the energy consumption of computing systems. In this paper, we consider partition based energy-aware scheduling of periodic real-time tasks on multicore processors. The scheduling exploits dynamic voltage scaling (DVS) and core sleep scheduling to reduce both dynamic and leakage energy consumption. If the overhead of core state switching is non-negligible, however, the performance of this scheduling strategy in terms of energy efficiency might degrade. To achieve further energy saving, we extend the static task scheduling with run-time task reallocation. The basic idea is to aggregate idle time among cores so that as many cores as possible could be put into sleep in a way that the overall energy consumption is reduced. Simulation results show that the proposed approach results in up to 20% energy saving over traditional leakage-aware DVS.

Huang, Hongtao; Wang, Jijie; Lei, Siyu; Wu, Guowei

2010-01-01T23:59:59.000Z

211

Entanglement distribution for a practical quantum-dot-based quantum processor architecture  

E-Print Network (OSTI)

We propose a quantum dot architecture for enabling universal quantum information processing. Quantum registers, consisting of arrays of vertically stacked self-assembled semiconductor quantum dots, are connected by chains of in-plane self-assembled dots. We propose an entanglement distributor, a device for producing and distributing maximally entangled qubits on demand, communicated through in-plane dot chains. This enables the transmission of entanglement to spatially separated register stacks, providing a resource for the realisation of a sizeable quantum processor built from coupled register stacks of practical size. Our entanglement distributor could be integrated into many of the present proposals for self-assembled quantum dot-based quantum computation. Our device exploits the properties of simple, relatively short, spin-chains and does not require microcavities. Utilizing the properties of self-assembled quantum dots, after distribution the entanglement can be mapped into relatively long lived spin qubits and purified, providing a flexible, distributed, off-line resource.

Timothy P. Spiller; Irene D'Amico; Brendon W. Lovett

2006-01-19T23:59:59.000Z

212

Fast String Search on Multicore Processors: Mapping fundamental algorithms onto parallel hardware  

Science Conference Proceedings (OSTI)

String searching is one of these basic algorithms. It has a host of applications, including search engines, network intrusion detection, virus scanners, spam filters, and DNA analysis, among others. The Cell processor, with its multiple cores, promises to speed-up string searching a lot. In this article, we show how we mapped string searching efficiently on the Cell. We present two implementations: • The fast implementation supports a small dictionary size (approximately 100 patterns) and provides a throughput of 40 Gbps, which is 100 times faster than reference implementations on x86 architectures. • The heavy-duty implementation is slower (3.3-4.3 Gbps), but supports dictionaries with tens of thousands of strings.

Scarpazza, Daniele P.; Villa, Oreste; Petrini, Fabrizio

2008-04-01T23:59:59.000Z

213

Recent Results from the EVN MkIV Data Processor at JIVE  

E-Print Network (OSTI)

Recent achievements at the EVN MkIV data processor at JIVE include decreasing the read-out time for the whole correlator to 0.25 seconds (or 0.125 s for half the correlator), improving the end quality of user data (e.g., applying an improved 2-bit van Vleck correction), developing new astronomical capabilities (e.g., oversampling to x 4, wider-field mapping), and strengthening liaison procedures with PIs (e.g., pipelining, the EVN Archive facility). At the same time, the move to a disk-based EVN and regular incorporation of FTP fringe-checks is well underway, resulting in more reliable data quality. We will review these developments, highlighting how they may broaden the kinds of astronomy you can do. We'll also go over some measures you can take to help you get the most out of these new/improved features.

R. M. Campbell

2004-12-30T23:59:59.000Z

214

Preemptive scheduling of jobs with tied parameters on a single processor to minimize the number of late jobs  

Science Conference Proceedings (OSTI)

We have n jobs with release times and due-dates to be scheduled on a single-machine that can handle at most one job at a time. Our objective is to minimize the number of late jobs, ones completed after their due-dates. This problem is known to ... Keywords: algorithm, due date, late job, release date, scheduling single processor

Nodari Vakhania

2010-01-01T23:59:59.000Z

215

Optimizing the performance of streaming numerical kernels on the IBM Blue Gene/P PowerPC 450 processor  

Science Conference Proceedings (OSTI)

Several emerging petascale architectures use energy-efficient processors with vectorized computational units and in-order thread processing. On these architectures the sustained performance of streaming numerical kernels, ubiquitous in the solution of ... Keywords: Blue Gene/P, SIMD, code generation, high-performance computing, performance optimization

Tareq Malas, Aron J. Ahmadia, Jed Brown, John A. Gunnels, David E. Keyes

2013-05-01T23:59:59.000Z

216

GATS 1.0: a novel GA-based scheduling algorithm for task scheduling on heterogeneous processor nets  

Science Conference Proceedings (OSTI)

We present a novel GA-based scheduling algorithm for heterogeneous processor networks that succeeds in generating task schedules with completion times that are 7% and 10.1% shorter than those produced by two of the best existing scheduling algorithms ... Keywords: genetic algorithm, heterogeneous systems, parallel processing, scheduling

Mohammad Daoud; Nawwaf Kharma

2005-06-01T23:59:59.000Z

217

A 65nm dual-mode baseband and multimedia application processor SoC with advanced power and memory management  

Science Conference Proceedings (OSTI)

A Dual-mode baseband (W-CDMA/HSDPA and GSM/GPRS/EDGE) and multimedia application processor SoC is described. The SoC fabricated in triple-Vth 65nm CMOS has 3 CPU cores and 20 separate power domains to achieve both high performance and low power. The ...

Tatsuya Kamei; Tetsuhiro Yamada; Takao Koike; Masayuki Ito; Takahiro Irita; Kenichi Nitta; Toshihiro Hattori; Shinichi Yoshioka

2009-01-01T23:59:59.000Z

218

Gas purification  

SciTech Connect

Natural gas having a high carbon dioxide content is contacted with sea water in an absorber at or near the bottom of the ocean to produce a purified natural gas.

Cook, C.F.; Hays, G.E.

1982-03-30T23:59:59.000Z

219

Natural Gas  

U.S. Energy Information Administration (EIA)

Natural Gas. Under the baseline winter weather scenario, EIA expects end-of-October working gas inventories will total 3,830 billion cubic feet (Bcf) and end March ...

220

Gas Week  

Reports and Publications (EIA)

Presented by: Guy F. Caruso, EIA AdministratorPresented to: Gas WeekHouston, TexasSeptember 24, 2003

Information Center

2003-09-24T23:59:59.000Z

Note: This page contains sample records for the topic "gas processors associa" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Computational Particle Dynamic Simulations on Multicore Processors (CPDMu) Final Report â?? Phase I  

SciTech Connect

Statement of Problem - Department of Energy has many legacy codes for simulation of computational particle dynamics and computational fluid dynamics applications that are designed to run on sequential processors and are not easily parallelized. Emerging high-performance computing architectures employ massively parallel multicore architectures (e.g., graphics processing units) to increase throughput. Parallelization of legacy simulation codes is a high priority, to achieve compatibility, efficiency, accuracy, and extensibility. General Statement of Solution - A legacy simulation application designed for implementation on mainly-sequential processors has been represented as a graph G. Mathematical transformations, applied to G, produce a graph representation {und G} for a high-performance architecture. Key computational and data movement kernels of the application were analyzed/optimized for parallel execution using the mapping G {yields} {und G}, which can be performed semi-automatically. This approach is widely applicable to many types of high-performance computing systems, such as graphics processing units or clusters comprised of nodes that contain one or more such units. Phase I Accomplishments - Phase I research decomposed/profiled computational particle dynamics simulation code for rocket fuel combustion into low and high computational cost regions (respectively, mainly sequential and mainly parallel kernels), with analysis of space and time complexity. Using the research team's expertise in algorithm-to-architecture mappings, the high-cost kernels were transformed, parallelized, and implemented on Nvidia Fermi GPUs. Measured speedups (GPU with respect to single-core CPU) were approximately 20-32X for realistic model parameters, without final optimization. Error analysis showed no loss of computational accuracy. Commercial Applications and Other Benefits - The proposed research will constitute a breakthrough in solution of problems related to efficient parallel computation of particle and fluid dynamics simulations. These problems occur throughout DOE, military and commercial sectors: the potential payoff is high. We plan to license or sell the solution to contractors for military and domestic applications such as disaster simulation (aerodynamic and hydrodynamic), Government agencies (hydrological and environmental simulations), and medical applications (e.g., in tomographic image reconstruction). Keywords - High-performance Computing, Graphic Processing Unit, Fluid/Particle Simulation. Summary for Members of Congress - Department of Energy has many simulation codes that must compute faster, to be effective. The Phase I research parallelized particle/fluid simulations for rocket combustion, for high-performance computing systems.

Mark S. Schmalz

2011-07-24T23:59:59.000Z

222

Tennessee Natural Gas Number of Gas and Gas Condensate Wells...  

U.S. Energy Information Administration (EIA) Indexed Site

Gas and Gas Condensate Wells (Number of Elements) Tennessee Natural Gas Number of Gas and Gas Condensate Wells (Number of Elements) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5...

223

Virginia Natural Gas Number of Gas and Gas Condensate Wells ...  

Gasoline and Diesel Fuel Update (EIA)

Gas and Gas Condensate Wells (Number of Elements) Virginia Natural Gas Number of Gas and Gas Condensate Wells (Number of Elements) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5...

224

Arkansas Natural Gas Number of Gas and Gas Condensate Wells ...  

Gasoline and Diesel Fuel Update (EIA)

Gas and Gas Condensate Wells (Number of Elements) Arkansas Natural Gas Number of Gas and Gas Condensate Wells (Number of Elements) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5...

225

Oklahoma Natural Gas Number of Gas and Gas Condensate Wells ...  

Gasoline and Diesel Fuel Update (EIA)

Gas and Gas Condensate Wells (Number of Elements) Oklahoma Natural Gas Number of Gas and Gas Condensate Wells (Number of Elements) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5...

226

Louisiana Natural Gas Number of Gas and Gas Condensate Wells...  

U.S. Energy Information Administration (EIA) Indexed Site

Gas and Gas Condensate Wells (Number of Elements) Louisiana Natural Gas Number of Gas and Gas Condensate Wells (Number of Elements) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5...

227

Maryland Natural Gas Number of Gas and Gas Condensate Wells ...  

Annual Energy Outlook 2012 (EIA)

Gas and Gas Condensate Wells (Number of Elements) Maryland Natural Gas Number of Gas and Gas Condensate Wells (Number of Elements) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5...

228

Kentucky Natural Gas Number of Gas and Gas Condensate Wells ...  

U.S. Energy Information Administration (EIA) Indexed Site

Gas and Gas Condensate Wells (Number of Elements) Kentucky Natural Gas Number of Gas and Gas Condensate Wells (Number of Elements) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5...

229

Pennsylvania Natural Gas Number of Gas and Gas Condensate Wells...  

Gasoline and Diesel Fuel Update (EIA)

Gas and Gas Condensate Wells (Number of Elements) Pennsylvania Natural Gas Number of Gas and Gas Condensate Wells (Number of Elements) Decade Year-0 Year-1 Year-2 Year-3 Year-4...

230

Michigan Natural Gas Number of Gas and Gas Condensate Wells ...  

Annual Energy Outlook 2012 (EIA)

Gas and Gas Condensate Wells (Number of Elements) Michigan Natural Gas Number of Gas and Gas Condensate Wells (Number of Elements) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5...

231

Colorado Natural Gas Number of Gas and Gas Condensate Wells ...  

Gasoline and Diesel Fuel Update (EIA)

Gas and Gas Condensate Wells (Number of Elements) Colorado Natural Gas Number of Gas and Gas Condensate Wells (Number of Elements) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5...

232

Global-Aware and Multi-Order Context-Based Prefetching for High-Performance Processors  

Science Conference Proceedings (OSTI)

Data prefetching is widely used in high-end computing systems to accelerate data accesses and to bridge the increasing performance gap between processor and memory. Context-based prefetching has become a primary focus of study in recent years due to its general applicability. However, current context-based prefetchers only adopt the context analysis of a single order, which suffers from low prefetching coverage and thus limits the overall prefetching effectiveness. Also, existing approaches usually consider the context of the address stream from a single instruction but not the context of the address stream from all instructions, which further limits the context-based prefetching effectiveness. In this study, we propose a new context-based prefetcher called the Global-aware and Multi-order Context-based (GMC) prefetcher. The GMC prefetcher uses multi-order, local and global context analysis to increase prefetching coverage while maintaining prefetching accuracy. In extensive simulation testing of the SPEC-CPU2006 benchmarks with an enhanced CMP$im simulator, the proposed GMC prefetcher was shown to outperform existing prefetchers and to reduce the data-access latency effectively. The average Instructions Per Cycle (IPC) improvement of SPEC CINT2006 and CFP2006 benchmarks with GMC prefetching was over 55% and 44% respectively.

Chen, Yong [ORNL; Zhu, Huaiyu [Illinois Institute of Technology; Roth, Philip C [ORNL; Jin, Hui [Illinois Institute of Technology; Sun, Xian-He [Illinois Institute of Technology

2011-01-01T23:59:59.000Z

233

Optimizing performance of superscalar codes for a single Cray X1MSP processor  

Science Conference Proceedings (OSTI)

The growing gap between sustained and peak performance for full-scale complex scientific applications on conventional supercomputers is a major concern in high performance computing. The recently-released vector-based Cray X1 offers to bridge this gap for many demanding scientific applications. However, this unique architecture contains both data caches and multi-streaming processing units, and the optimal programming methodology is still under investigation. In this paper we investigate Cray X1 code optimization for a suite of computational kernels originally designed for superscalar processors. For our study, we select four applications from the SPLASH2 application suite (1-D FFT,Radix, Ocean, and Nbody), two kernels from the NAS benchmark suite (3-DFFT and CG), and a matrix-matrix multiplication kernel. Results show that for many cases, the addition of vectorization compiler directives results faster runtimes. However, to achieve a significant performance improvement via increased vector length, it is often necessary to restructure the program at the source level sometimes leading to algorithmic level transformations. Additionally, memory bank conflicts may result in substantial performance losses. These conflicts can often be exacerbated when optimizing code for increased vector lengths, and must be explicitly minimized. Finally, we investigate the relationship of the X1 data caches on overall performance.

Shan, Hongzhang; Strohmaier, Erich; Oliker, Leonid

2004-06-08T23:59:59.000Z

234

REFORMING OF LIQUID HYDROCARBONS IN A NOVEL HYDROGEN-SELECTIVE MEMBRANE-BASED FUEL PROCESSOR  

DOE Green Energy (OSTI)

We propose to develop an inorganic metal-metal composite membrane to study reforming of liquid hydrocarbons and methanol by equilibrium shift in membrane-reactor configuration, viewed as fuel processor. Based on our current understanding and experience in the Pd-ceramic composite membrane, we propose to further develop this membrane to a Pd and Pd-Ag alloy membrane on microporous stainless steel support to provide structural reliability from distortion due to thermal cycling. Because of the metal-metal composite structure, we believe that the associated end-seal problem in the Pd-ceramic composite membrane in tubular configuration would not be an issue at all. We plan to test this membrane as membrane-reactor-separator for reforming liquid hydrocarbons and methanol for simultaneous production and separation of high-purity hydrogen for PEM fuel cell applications. To improve the robustness of the membrane film and deep penetration into the pores, we have used osmotic pressure field in the electroless plating process. Using this novel method, we deposited thin Pd-film on the inside of microporous stainless steel tube and the deposited film appears to robust and defect free. Work is in progress to evaluate the hydrogen perm-selectivity of the Pd-stainless steel membrane.

Shamsuddin Ilias

2003-06-30T23:59:59.000Z

235

USE OF A DIESEL FUEL PROCESSOR FOR RAPID AND EFFICIENT REGENERATION OF SINGLE LEG NOX ADSORBER SYSTEMS  

DOE Green Energy (OSTI)

Lean NOx adsorber systems are one of the primary candidate technologies for the control of NOx from diesel engines to meet the 2007-2010 US emissions regulations, which require a 90% reduction of NOx from the 2004 regulations. Several of the technical challenges facing this technology are regeneration at low exhaust temperatures and the efficient use of diesel fuel to minimize fuel penalty. A diesel processor system has been developed and tested in a single leg NOx adsorber configuration on a diesel engine test stand. During NOx adsorber regeneration, this fuel processor system performs reduces the exhaust O2 level to zero and efficiently processes the diesel fuel to H2 and CO. Combined with a Nox adsorber catalyst, this system has demonstrated NOx reduction above 90%, regeneration of the NOx adsorber H2/CO pulses as short as 1 second and fuel penalties in the 3 to 4% range at 50% load. This fuel processor system can also be used to provide the desulfation cycle required with sulfur containing fuels as well as providing thermal management for PM filter regeneration.

Betta, R; Cizeron, J; Sheridan, D; Davis, T

2003-08-24T23:59:59.000Z

236

Fault-Tolerant Average Execution Time Optimization for General-Purpose Multi-Processor System-On-Chips, Design  

E-Print Network (OSTI)

Abstract 1 Fault-tolerance is due to the semiconductor technology development important, not only for safety-critical systems but also for general-purpose (non-safety critical) systems. However, instead of guaranteeing that deadlines always are met, it is for general-purpose systems important to minimize the average execution time (AET) while ensuring fault-tolerance. For a given job and a soft (transient) error probability, we define mathematical formulas for AET that includes bus communication overhead for both voting (active replication) and rollback-recovery with checkpointing (RRC). And, for a given multi-processor system-on-chip (MPSoC), we define integer linear programming (ILP) models that minimize AET including bus communication overhead when: (1) selecting the number of checkpoints when using RRC, (2) finding the number of processors and job-to-processor assignment when using voting, and (3) defining fault-tolerance scheme (voting or RRC) per job and defining its usage for each job. Experiments demonstrate significant savings in AET. I.

Mikael Väyrynen; Virendra Singh; Erik Larsson

2011-01-01T23:59:59.000Z

237

Investigating the effectiveness of many-core network processors for high performance cyber protection systems. Part I, FY2011.  

SciTech Connect

This report documents our first year efforts to address the use of many-core processors for high performance cyber protection. As the demands grow for higher bandwidth (beyond 1 Gbits/sec) on network connections, the need to provide faster and more efficient solution to cyber security grows. Fortunately, in recent years, the development of many-core network processors have seen increased interest. Prior working experiences with many-core processors have led us to investigate its effectiveness for cyber protection tools, with particular emphasis on high performance firewalls. Although advanced algorithms for smarter cyber protection of high-speed network traffic are being developed, these advanced analysis techniques require significantly more computational capabilities than static techniques. Moreover, many locations where cyber protections are deployed have limited power, space and cooling resources. This makes the use of traditionally large computing systems impractical for the front-end systems that process large network streams; hence, the drive for this study which could potentially yield a highly reconfigurable and rapidly scalable solution.

Wheeler, Kyle Bruce; Naegle, John Hunt; Wright, Brian J.; Benner, Robert E., Jr.; Shelburg, Jeffrey Scott; Pearson, David Benjamin; Johnson, Joshua Alan; Onunkwo, Uzoma A.; Zage, David John; Patel, Jay S.

2011-09-01T23:59:59.000Z

238

Natural Gas  

Energy.gov (U.S. Department of Energy (DOE))

The Energy Department supports research and policy options to ensure environmentally sustainable domestic and global supplies of oil and natural gas.

239

Gas separating  

DOE Patents (OSTI)

Feed gas is directed tangentially along the non-skin surface of gas separation membrane modules comprising a cylindrical bundle of parallel contiguous hollow fibers supported to allow feed gas to flow from an inlet at one end of a cylindrical housing through the bores of the bundled fibers to an outlet at the other end while a component of the feed gas permeates through the fibers, each having the skin side on the outside, through a permeate outlet in the cylindrical casing. 3 figs.

Gollan, A.

1988-03-29T23:59:59.000Z

240

Missouri Natural Gas Number of Gas and Gas Condensate ...  

U.S. Energy Information Administration (EIA)

Missouri Natural Gas Number of Gas and Gas Condensate Wells (Number of Elements) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6

Note: This page contains sample records for the topic "gas processors associa" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Recovery Act: Integrated DC-DC Conversion for Energy-Efficient Multicore Processors  

SciTech Connect

In this project, we have developed the use of thin-film magnetic materials to improve in energy efficiency of digital computing applications by enabling integrated dc-dc power conversion and management with on-chip power inductors. Integrated voltage regulators also enables fine-grained power management, by providing dynamic scaling of the supply voltage in concert with the clock frequency of synchronous logic to throttle power consumption at periods of low computational demand. The voltage converter generates lower output voltages during periods of low computational performance requirements and higher output voltages during periods of high computational performance requirements. Implementation of integrated power conversion requires high-capacity energy storage devices, which are generally not available in traditional semiconductor processes. We achieve this with integration of thin-film magnetic materials into a conventional complementary metal-oxide-semiconductor (CMOS) process for high-quality on-chip power inductors. This project includes a body of work conducted to develop integrated switch-mode voltage regulators with thin-film magnetic power inductors. Soft-magnetic materials and inductor topologies are selected and optimized, with intent to maximize efficiency and current density of the integrated regulators. A custom integrated circuit (IC) is designed and fabricated in 45-nm CMOS silicon-on-insulator (SOI) to provide the control system and power-train necessary to drive the power inductors, in addition to providing a digital load for the converter. A silicon interposer is designed and fabricated in collaboration with IBM Research to integrate custom power inductors by chip stacking with the 45-nm CMOS integrated circuit, enabling power conversion with current density greater than 10A/mm2. The concepts and designs developed from this work enable significant improvements in performance-per-watt of future microprocessors in servers, desktops, and mobile devices. These new approaches to scaled voltage regulation for computing devices also promise significant impact on electricity consumption in the United States and abroad by improving the efficiency of all computational platforms. In 2006, servers and datacenters in the United States consumed an estimated 61 billion kWh or about 1.5% of the nation's total energy consumption. Federal Government servers and data centers alone accounted for about 10 billion kWh, for a total annual energy cost of about $450 million. Based upon market growth and efficiency trends, estimates place current server and datacenter power consumption at nearly 85 billion kWh in the US and at almost 280 billion kWh worldwide. Similar estimates place national desktop, mobile and portable computing at 80 billion kWh combined. While national electricity utilization for computation amounts to only 4% of current usage, it is growing at a rate of about 10% a year with volume servers representing one of the largest growth segments due to the increasing utilization of cloud-based services. The percentage of power that is consumed by the processor in a server varies but can be as much as 30% of the total power utilization, with an additional 50% associated with heat removal. The approaches considered here should allow energy efficiency gains as high as 30% in processors for all computing platforms, from high-end servers to smart phones, resulting in a direct annual energy savings of almost 15 billion kWh nationally, and 50 billion kWh globally. The work developed here is being commercialized by the start-up venture, Ferric Semiconductor, which has already secured two Phase I SBIR grants to bring these technologies to the marketplace.

Shepard, Kenneth L

2013-03-31T23:59:59.000Z

242

GVT Algorithms and Discrete Event Dynamics on 128K+ Processor Cores  

Science Conference Proceedings (OSTI)

Parallel discrete event simulation (PDES) represents a class of codes that are challenging to scale to large number of processors due to tight global timestamp-ordering and fine-grained event execution. One of the critical factors in scaling PDES is the efficiency of the underlying global virtual time (GVT) algorithm needed for correctness of parallel execution and speed of progress. Although many GVT algorithms have been proposed previously, few have been proposed for scalable asynchronous execution and none customized to exploit one-sided communication. Moreover, the detailed performance effects of actual GVT algorithm implementations on large platforms are unknown. Here, three major GVT algorithms intended for scalable execution on high-performance systems are studied: (1) a synchronous GVT algorithm that affords ease of implementation, (2) an asynchronous GVT algorithm that is more complex to implement but can relieve blocking latencies, and (3) a variant of the asynchronous GVT algorithm, proposed and studied for the first time here, to exploit one-sided communication in extant supercomputing platforms. Performance results are presented of implementations of these algorithms on over 64,000 cores of a Cray XT5 system, exercised on a range of parameters: optimistic and conservative synchronization, fine- to medium-grained event computation, synthetic and non-synthetic applications, and different lookahead values. Performance of tens of billions of events executed per second are registered, exceeding the speeds of any known PDES engine, and showing asynchronous GVT algorithms to outperform state-of-the-art synchronous GVT algorithms. Detailed PDES-specific runtime metrics are presented to further the understanding of tightly-coupled discrete event execution dynamics on massively parallel platforms.

Perumalla, Kalyan S [ORNL; Park, Alfred J [ORNL; Tipparaju, Vinod [ORNL

2011-01-01T23:59:59.000Z

243

Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

,366 ,366 95,493 1.08 0 0.00 1 0.03 29,406 0.56 1,206 0.04 20,328 0.64 146,434 0.73 - Natural Gas 1996 Million Percent of Million Percent of Cu. Feet National Total Cu. Feet National Total Net Interstate Movements: Industrial: Marketed Production: Vehicle Fuel: Deliveries to Consumers: Electric Residential: Utilities: Commercial: Total: South Carolina South Carolina 88. Summary Statistics for Natural Gas South Carolina, 1992-1996 Table 1992 1993 1994 1995 1996 Reserves (billion cubic feet) Estimated Proved Reserves (dry) as of December 31 ....................................... 0 0 0 0 0 Number of Gas and Gas Condensate Wells Producing at End of Year.............................. 0 0 0 0 0 Production (million cubic feet) Gross Withdrawals From Gas Wells ......................................... 0 0 0 0 0 From Oil Wells ...........................................

244

Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

0,216 0,216 50,022 0.56 135 0.00 49 1.67 85,533 1.63 8,455 0.31 45,842 1.45 189,901 0.95 - Natural Gas 1996 Million Percent of Million Percent of Cu. Feet National Total Cu. Feet National Total Net Interstate Movements: Industrial: Marketed Production: Vehicle Fuel: Deliveries to Consumers: Electric Residential: Utilities: Commercial: Total: M a r y l a n d Maryland 68. Summary Statistics for Natural Gas Maryland, 1992-1996 Table 1992 1993 1994 1995 1996 Reserves (billion cubic feet) Estimated Proved Reserves (dry) as of December 31 ....................................... NA NA NA NA NA Number of Gas and Gas Condensate Wells Producing at End of Year.............................. 9 7 7 7 8 Production (million cubic feet) Gross Withdrawals From Gas Wells ......................................... 33 28 26 22 135 From Oil Wells ...........................................

245

Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

21,547 21,547 4,916 0.06 0 0.00 0 0.00 7,012 0.13 3 0.00 7,099 0.22 19,031 0.10 N e w H a m p s h i r e New Hampshire 77. Summary Statistics for Natural Gas New Hampshire, 1992-1996 Table 1992 1993 1994 1995 1996 Reserves (billion cubic feet) Estimated Proved Reserves (dry) as of December 31 ....................................... 0 0 0 0 0 Number of Gas and Gas Condensate Wells Producing at End of Year.............................. 0 0 0 0 0 Production (million cubic feet) Gross Withdrawals From Gas Wells ......................................... 0 0 0 0 0 From Oil Wells ........................................... 0 0 0 0 0 Total.............................................................. 0 0 0 0 0 Repressuring ................................................ 0 0 0 0 0 Nonhydrocarbon Gases Removed ............... 0 0 0 0 0 Wet After Lease Separation..........................

246

Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

139,881 139,881 26,979 0.30 463 0.00 115 3.92 27,709 0.53 19,248 0.70 28,987 0.92 103,037 0.52 A r i z o n a Arizona 50. Summary Statistics for Natural Gas Arizona, 1992-1996 Table 1992 1993 1994 1995 1996 Reserves (billion cubic feet) Estimated Proved Reserves (dry) as of December 31 ....................................... NA NA NA NA NA Number of Gas and Gas Condensate Wells Producing at End of Year.............................. 6 6 6 7 7 Production (million cubic feet) Gross Withdrawals From Gas Wells ......................................... 721 508 711 470 417 From Oil Wells ........................................... 72 110 48 88 47 Total.............................................................. 794 618 759 558 464 Repressuring ................................................ 0 0 0 0 0 Nonhydrocarbon Gases Removed ............... 0 0 0 0 0 Wet After Lease

247

Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

Middle Middle Atlantic Middle Atlantic 37. Summary Statistics for Natural Gas Middle Atlantic, 1992-1996 Table 1992 1993 1994 1995 1996 Reserves (billion cubic feet) Estimated Proved Reserves (dry) as of December 31 ....................................... 1,857 1,981 2,042 1,679 1,928 Number of Gas and Gas Condensate Wells Producing at End of Year.............................. 36,906 36,857 26,180 37,159 38,000 Production (million cubic feet) Gross Withdrawals From Gas Wells ......................................... 161,372 152,717 140,444 128,677 152,494 From Oil Wells ........................................... 824 610 539 723 641 Total.............................................................. 162,196 153,327 140,982 129,400 153,134 Repressuring ................................................ 0 0 0 0 0 Nonhydrocarbon Gases Removed

248

Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

386,690 386,690 102,471 1.16 0 0.00 43 1.47 142,319 2.72 5,301 0.19 98,537 3.12 348,671 1.74 M i n n e s o t a Minnesota 71. Summary Statistics for Natural Gas Minnesota, 1992-1996 Table 1992 1993 1994 1995 1996 Reserves (billion cubic feet) Estimated Proved Reserves (dry) as of December 31 ....................................... 0 0 0 0 0 Number of Gas and Gas Condensate Wells Producing at End of Year.............................. 0 0 0 0 0 Production (million cubic feet) Gross Withdrawals From Gas Wells ......................................... 0 0 0 0 0 From Oil Wells ........................................... 0 0 0 0 0 Total.............................................................. 0 0 0 0 0 Repressuring ................................................ 0 0 0 0 0 Nonhydrocarbon Gases Removed ............... 0 0 0 0 0 Wet After Lease Separation..........................

249

Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

1,108,583 1,108,583 322,275 3.63 298 0.00 32 1.09 538,749 10.28 25,863 0.95 218,054 6.90 1,104,972 5.52 I l l i n o i s Illinois 61. Summary Statistics for Natural Gas Illinois, 1992-1996 Table 1992 1993 1994 1995 1996 Reserves (billion cubic feet) Estimated Proved Reserves (dry) as of December 31 ....................................... NA NA NA NA NA Number of Gas and Gas Condensate Wells Producing at End of Year.............................. 382 385 390 372 370 Production (million cubic feet) Gross Withdrawals From Gas Wells ......................................... 337 330 323 325 289 From Oil Wells ........................................... 10 10 10 10 9 Total.............................................................. 347 340 333 335 298 Repressuring ................................................ 0 0 0 0 0 Nonhydrocarbon Gases Removed ...............

250

Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

286,485 286,485 71,533 0.81 25 0.00 31 1.06 137,225 2.62 5,223 0.19 72,802 2.31 286,814 1.43 M i s s o u r i Missouri 73. Summary Statistics for Natural Gas Missouri, 1992-1996 Table 1992 1993 1994 1995 1996 Reserves (billion cubic feet) Estimated Proved Reserves (dry) as of December 31 ....................................... NA NA NA NA NA Number of Gas and Gas Condensate Wells Producing at End of Year.............................. 5 8 12 15 24 Production (million cubic feet) Gross Withdrawals From Gas Wells ......................................... 27 14 8 16 25 From Oil Wells ........................................... 0 0 0 0 0 Total.............................................................. 27 14 8 16 25 Repressuring ................................................ 0 0 0 0 0 Nonhydrocarbon Gases Removed ............... 0 0 0 0 0 Wet After Lease Separation..........................

251

Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

411,951 411,951 100,015 1.13 0 0.00 5 0.17 114,365 2.18 45,037 1.65 96,187 3.05 355,609 1.78 Massachusetts Massachusetts 69. Summary Statistics for Natural Gas Massachusetts, 1992-1996 Table 1992 1993 1994 1995 1996 Reserves (billion cubic feet) Estimated Proved Reserves (dry) as of December 31 ....................................... 0 0 0 0 0 Number of Gas and Gas Condensate Wells Producing at End of Year.............................. 0 0 0 0 0 Production (million cubic feet) Gross Withdrawals From Gas Wells ......................................... 0 0 0 0 0 From Oil Wells ........................................... 0 0 0 0 0 Total.............................................................. 0 0 0 0 0 Repressuring ................................................ 0 0 0 0 0 Nonhydrocarbon Gases Removed ............... 0 0 0 0 0 Wet After Lease Separation..........................

252

Natural gas  

E-Print Network (OSTI)

www.eia.gov Over time the electricity mix gradually shifts to lower-carbon options, led by growth in natural gas and renewable generation U.S. electricity net generation trillion kilowatthours 6

Adam Sieminski Administrator; Adam Sieminski Usnic; Adam Sieminski Usnic

2013-01-01T23:59:59.000Z

253

Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

68,747 68,747 34,577 0.39 0 0.00 34 1.16 14,941 0.29 0 0.00 11,506 0.36 61,058 0.31 I d a h o Idaho 60. Summary Statistics for Natural Gas Idaho, 1992-1996 Table 1992 1993 1994 1995 1996 Reserves (billion cubic feet) Estimated Proved Reserves (dry) as of December 31 ....................................... 0 0 0 0 0 Number of Gas and Gas Condensate Wells Producing at End of Year.............................. 0 0 0 0 0 Production (million cubic feet) Gross Withdrawals From Gas Wells ......................................... 0 0 0 0 0 From Oil Wells ........................................... 0 0 0 0 0 Total.............................................................. 0 0 0 0 0 Repressuring ................................................ 0 0 0 0 0 Nonhydrocarbon Gases Removed ............... 0 0 0 0 0 Wet After Lease Separation.......................... 0 0 0 0 0 Vented

254

Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

0 0 0 0.00 0 0.00 0 0.00 540 0.01 0 0.00 2,132 0.07 2,672 0.01 H a w a i i Hawaii 59. Summary Statistics for Natural Gas Hawaii, 1992-1996 Table 1992 1993 1994 1995 1996 Reserves (billion cubic feet) Estimated Proved Reserves (dry) as of December 31 ....................................... 0 0 0 0 0 Number of Gas and Gas Condensate Wells Producing at End of Year.............................. 0 0 0 0 0 Production (million cubic feet) Gross Withdrawals From Gas Wells ......................................... 0 0 0 0 0 From Oil Wells ........................................... 0 0 0 0 0 Total.............................................................. 0 0 0 0 0 Repressuring ................................................ 0 0 0 0 0 Nonhydrocarbon Gases Removed ............... 0 0 0 0 0 Wet After Lease Separation.......................... 0 0 0 0 0 Vented and Flared

255

Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

483,052 483,052 136,722 1.54 6,006 0.03 88 3.00 16,293 0.31 283,557 10.38 41,810 1.32 478,471 2.39 F l o r i d a Florida 57. Summary Statistics for Natural Gas Florida, 1992-1996 Table 1992 1993 1994 1995 1996 Reserves (billion cubic feet) Estimated Proved Reserves (dry) as of December 31 ....................................... 47 50 98 92 96 Number of Gas and Gas Condensate Wells Producing at End of Year.............................. 0 0 0 0 0 Production (million cubic feet) Gross Withdrawals From Gas Wells ......................................... 0 0 0 0 0 From Oil Wells ........................................... 7,584 8,011 8,468 7,133 6,706 Total.............................................................. 7,584 8,011 8,468 7,133 6,706 Repressuring ................................................ 0 0 0 0 0 Nonhydrocarbon Gases Removed ...............

256

Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

291,898 291,898 113,995 1.29 0 0.00 4 0.14 88,078 1.68 3,491 0.13 54,571 1.73 260,140 1.30 I o w a Iowa 63. Summary Statistics for Natural Gas Iowa, 1992-1996 Table 1992 1993 1994 1995 1996 Reserves (billion cubic feet) Estimated Proved Reserves (dry) as of December 31 ....................................... 0 0 0 0 0 Number of Gas and Gas Condensate Wells Producing at End of Year.............................. 0 0 0 0 0 Production (million cubic feet) Gross Withdrawals From Gas Wells ......................................... 0 0 0 0 0 From Oil Wells ........................................... 0 0 0 0 0 Total.............................................................. 0 0 0 0 0 Repressuring ................................................ 0 0 0 0 0 Nonhydrocarbon Gases Removed ............... 0 0 0 0 0 Wet After Lease Separation.......................... 0 0 0

257

Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

Vehicle Fuel: Vehicle Fuel: Deliveries to Consumers: Electric Residential: Utilities: Commercial: Total: New England New England 36. Summary Statistics for Natural Gas New England, 1992-1996 Table 691,089 167,354 1.89 0 0.00 40 1.36 187,469 3.58 80,592 2.95 160,761 5.09 596,215 2.98 1992 1993 1994 1995 1996 Reserves (billion cubic feet) Estimated Proved Reserves (dry) as of December 31 ....................................... 0 0 0 0 0 Number of Gas and Gas Condensate Wells Producing at End of Year.............................. 0 0 0 0 0 Production (million cubic feet) Gross Withdrawals From Gas Wells ......................................... 0 0 0 0 0 From Oil Wells ........................................... 0 0 0 0 0 Total.............................................................. 0 0 0 0 0 Repressuring ................................................

258

Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

29,693 29,693 0 0.00 0 0.00 6 0.20 17,290 0.33 0 0.00 16,347 0.52 33,644 0.17 District of Columbia District of Columbia 56. Summary Statistics for Natural Gas District of Columbia, 1992-1996 Table 1992 1993 1994 1995 1996 Reserves (billion cubic feet) Estimated Proved Reserves (dry) as of December 31 ....................................... 0 0 0 0 0 Number of Gas and Gas Condensate Wells Producing at End of Year.............................. 0 0 0 0 0 Production (million cubic feet) Gross Withdrawals From Gas Wells ......................................... 0 0 0 0 0 From Oil Wells ........................................... 0 0 0 0 0 Total.............................................................. 0 0 0 0 0 Repressuring ................................................ 0 0 0 0 0 Nonhydrocarbon Gases Removed ............... 0 0 0 0 0 Wet After Lease Separation..........................

259

Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

42,980 42,980 14,164 0.16 0 0.00 1 0.03 9,791 0.19 23,370 0.86 6,694 0.21 54,020 0.27 D e l a w a r e Delaware 55. Summary Statistics for Natural Gas Delaware, 1992-1996 Table 1992 1993 1994 1995 1996 Reserves (billion cubic feet) Estimated Proved Reserves (dry) as of December 31 ....................................... 0 0 0 0 0 Number of Gas and Gas Condensate Wells Producing at End of Year.............................. 0 0 0 0 0 Production (million cubic feet) Gross Withdrawals From Gas Wells ......................................... 0 0 0 0 0 From Oil Wells ........................................... 0 0 0 0 0 Total.............................................................. 0 0 0 0 0 Repressuring ................................................ 0 0 0 0 0 Nonhydrocarbon Gases Removed ............... 0 0 0 0 0 Wet After Lease Separation..........................

260

Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

-49,536 -49,536 7,911 0.09 49,674 0.25 15 0.51 12,591 0.24 3 0.00 12,150 0.38 32,670 0.16 North Dakota North Dakota 82. Summary Statistics for Natural Gas North Dakota, 1992-1996 Table 1992 1993 1994 1995 1996 Reserves (billion cubic feet) Estimated Proved Reserves (dry) as of December 31 ....................................... 496 525 507 463 462 Number of Gas and Gas Condensate Wells Producing at End of Year.............................. 104 101 104 99 108 Production (million cubic feet) Gross Withdrawals From Gas Wells ......................................... 12,461 18,892 19,592 16,914 16,810 From Oil Wells ........................................... 47,518 46,059 43,640 39,760 38,906 Total.............................................................. 59,979 64,951 63,232 56,674 55,716 Repressuring ................................................

Note: This page contains sample records for the topic "gas processors associa" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

226,798 226,798 104,124 1.17 0 0.00 0 0.00 58,812 1.12 2,381 0.09 40,467 1.28 205,783 1.03 North Carolina North Carolina 81. Summary Statistics for Natural Gas North Carolina, 1992-1996 Table 1992 1993 1994 1995 1996 Reserves (billion cubic feet) Estimated Proved Reserves (dry) as of December 31 ....................................... 0 0 0 0 0 Number of Gas and Gas Condensate Wells Producing at End of Year.............................. 0 0 0 0 0 Production (million cubic feet) Gross Withdrawals From Gas Wells ......................................... 0 0 0 0 0 From Oil Wells ........................................... 0 0 0 0 0 Total.............................................................. 0 0 0 0 0 Repressuring ................................................ 0 0 0 0 0 Nonhydrocarbon Gases Removed ............... 0 0 0 0 0 Wet After Lease Separation..........................

262

Reactant gas composition for fuel cell potential control  

DOE Patents (OSTI)

A fuel cell (10) system in which a nitrogen (N.sub.2) gas is used on the anode section (11) and a nitrogen/oxygen (N.sub.2 /O.sub.2) gaseous mix is used on the cathode section (12) to maintain the cathode at an acceptable voltage potential during adverse conditions occurring particularly during off-power conditions, for example, during power plant shutdown, start-up and hot holds. During power plant shutdown, the cathode section is purged with a gaseous mixture of, for example, one-half percent (0.5%) oxygen (O.sub.2) and ninety-nine and a half percent (99.5%) nitrogen (N.sub.2) supplied from an ejector (21) bleeding in air (24/28) into a high pressure stream (27) of nitrogen (N.sub.2) as the primary or majority gas. Thereafter the fuel gas in the fuel processor (31) and the anode section (11) is purged with nitrogen gas to prevent nickel (Ni) carbonyl from forming from the shift catalyst. A switched dummy electrical load (30) is used to bring the cathode potential down rapidly during the start of the purges. The 0.5%/99.5% O.sub.2 /N.sub.2 mixture maintains the cathode potential between 0.3 and 0.7 volts, and this is sufficient to maintain the cathode potential at 0.3 volts for the case of H.sub.2 diffusing to the cathode through a 2 mil thick electrolyte filled matrix and below 0.8 volts for no diffusion at open circuit conditions. The same high pressure gas source (20) is used via a "T" juncture ("T") to purge the anode section and its associated fuel processor (31).

Bushnell, Calvin L. (Glastonbury, CT); Davis, Christopher L. (Tolland, CT)

1991-01-01T23:59:59.000Z

263

Gas Delivered  

Gasoline and Diesel Fuel Update (EIA)

. Average . Average Price of Natural Gas Delivered to Residential Consumers, 1980-1996 Figure 1980 1982 1984 1986 1988 1990 1992 1994 1996 0 2 4 6 8 10 0 40 80 120 160 200 240 280 320 Dollars per Thousand Cubic Feet Dollars per Thousand Cubic Meters Nominal Dollars Constant Dollars Sources: Nominal dollars: Energy Information Administration (EIA), Form EIA-176, "Annual Report of Natural and Supplemental Gas Supply and Disposition." Constant dollars: Prices were converted to 1995 dollars using the chain-type price indexes for Gross Domestic Product (1992 = 1.0) as published by the U. S. Department of Commerce, Bureau of Economic Analysis. Residential: Prices in this publication for the residential sector cover nearly all of the volumes of gas delivered. Commercial and Industrial: Prices for the commercial and industrial sectors are often associated with

264

GAS TURBINES  

E-Print Network (OSTI)

In the age of volatile and ever increasing natural gas fuel prices, strict new emission regulations and technological advancements, modern IGCC plants are the answer to growing market demands for efficient and environmentally friendly power generation. IGCC technology allows the use of low cost opportunity fuels, such as coal, of which there is a more than a 200-year supply in the U.S., and refinery residues, such as petroleum coke and residual oil. Future IGCC plants are expected to be more efficient and have a potential to be a lower cost solution to future CO2 and mercury regulations compared to the direct coal fired steam plants. Siemens has more than 300,000 hours of successful IGCC plant operational experience on a variety of heavy duty gas turbine models in Europe and the U.S. The gas turbines involved range from SGT5-2000E to SGT6-3000E (former designations are shown on Table 1). Future IGCC applications will extend this experience to the SGT5-4000F and SGT6-4000F/5000F/6000G gas turbines. In the currently operating Siemens ’ 60 Hz fleet, the SGT6-5000F gas turbine has the most operating engines and the most cumulative operating hours. Over the years, advancements have increased its performance and decreased its emissions and life cycle costs without impacting reliability. Development has been initiated to verify its readiness for future IGCC application including syngas combustion system testing. Similar efforts are planned for the SGT6-6000G and SGT5-4000F/SGT6-4000F models. This paper discusses the extensive development programs that have been carried out to demonstrate that target emissions and engine operability can be achieved on syngas operation in advanced F-class 50 Hz and 60 Hz gas turbine based IGCC applications.

Power For L; Satish Gadde; Jianfan Wu; Anil Gulati; Gerry Mcquiggan; Berthold Koestlin; Bernd Prade

2006-01-01T23:59:59.000Z

265

Electricity in lieu of nautral gas and oil for industrial thermal energy: a preliminary survey  

SciTech Connect

In 1974, industrial processors accounted for nearly 50% of the nation's natural gas consumption and nearly 20% of its consumption of petroleum. This report is a preliminary assessment of the potential capability of the process industries to substitute utility-generated electricity for these scarce fuels. It is tacitly assumed that virtually all public utilities will soon be relying on coal or nuclear fission for primary energy. It was concluded that the existing technology will permit substitution of electricity for approximately 75% of the natural gas and petroleum now being consumed by industrial processors, which is equivalent to an annual usage of 800 million barrels of oil and 9 trillion cubic feet of gas at 1974 levels. Process steam generation, used throughout industry and representing 40% of its energy usage, offers the best near-term potential for conversion to electricity. Electric boilers and energy costs for steam are briefly discussed. Electrically driven heat pumps are considered as a possible method to save additional low-grade energy. Electrical reheating at high temperatures in the primary metals sector will be an effective way to conserve gas and oil. A wholesale shift by industry to electricity to replace gas and oil will produce impacts on the public utilities and, perhaps, those of a more general socio-economic nature. The principal bar to large-scale electrical substitution is economics, not technology. 174 references.

Tallackson, J. R.

1979-02-01T23:59:59.000Z

266

Gas laser  

SciTech Connect

According to the invention, the gas laser comprises a housing which accommodates two electrodes. One of the electrodes is sectional and has a ballast resistor connected to each section. One of the electrodes is so secured in the housing that it is possible to vary the spacing between the electrodes in the direction of the flow of a gas mixture passed through an active zone between the electrodes where the laser effect is produced. The invention provides for a maximum efficiency of the laser under different operating conditions.

Kosyrev, F. K.; Leonov, A. P.; Pekh, A. K.; Timofeev, V. A.

1980-08-12T23:59:59.000Z

267

Nebraska Natural Gas Number of Gas and Gas Condensate Wells ...  

U.S. Energy Information Administration (EIA)

Nebraska Natural Gas Number of Gas and Gas Condensate Wells (Number of Elements) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9; 1980's: 15:

268

Mississippi Natural Gas Number of Gas and Gas Condensate Wells ...  

U.S. Energy Information Administration (EIA)

Mississippi Natural Gas Number of Gas and Gas Condensate Wells (Number of Elements) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9; 1980's:

269

Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

1,554,530 1,554,530 311,229 3.51 3,094,431 15.67 442 15.08 299,923 5.72 105,479 3.86 210,381 6.66 927,454 4.64 Mountain Mountain 43. Summary Statistics for Natural Gas Mountain, 1992-1996 Table 1992 1993 1994 1995 1996 Reserves (billion cubic feet) Estimated Proved Reserves (dry) as of December 31 ....................................... 38,711 38,987 37,366 39,275 38,944 Number of Gas and Gas Condensate Wells Producing at End of Year.............................. 30,965 34,975 38,539 38,775 41,236 Production (million cubic feet) Gross Withdrawals From Gas Wells ......................................... 2,352,729 2,723,393 3,046,159 3,131,205 3,166,689 From Oil Wells ........................................... 677,771 535,884 472,397 503,986 505,903 Total.............................................................. 3,030,499 3,259,277 3,518,556

270

Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

1,592,465 1,592,465 716,648 8.08 239,415 1.21 182 6.21 457,792 8.73 334,123 12.23 320,153 10.14 1,828,898 9.14 South Atlantic South Atlantic 40. Summary Statistics for Natural Gas South Atlantic, 1992-1996 Table 1992 1993 1994 1995 1996 Reserves (billion cubic feet) Estimated Proved Reserves (dry) as of December 31 ....................................... 3,307 3,811 4,496 4,427 4,729 Number of Gas and Gas Condensate Wells Producing at End of Year.............................. 39,412 35,149 41,307 37,822 36,827 Production (million cubic feet) Gross Withdrawals From Gas Wells ......................................... 206,766 208,892 234,058 236,072 233,409 From Oil Wells ........................................... 7,584 8,011 8,468 7,133 6,706 Total.............................................................. 214,349 216,903 242,526 243,204 240,115

271

Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

1,999,161 1,999,161 895,529 10.10 287,933 1.46 1,402 47.82 569,235 10.86 338,640 12.39 308,804 9.78 2,113,610 10.57 Pacific Contiguous Pacific Contiguous 44. Summary Statistics for Natural Gas Pacific Contiguous, 1992-1996 Table 1992 1993 1994 1995 1996 Reserves (billion cubic feet) Estimated Proved Reserves (dry) as of December 31 ....................................... 3,896 3,781 3,572 3,508 2,082 Number of Gas and Gas Condensate Wells Producing at End of Year.............................. 1,142 1,110 1,280 1,014 996 Production (million cubic feet) Gross Withdrawals From Gas Wells ......................................... 156,635 124,207 117,725 96,329 88,173 From Oil Wells ........................................... 294,800 285,162 282,227 289,430 313,581 Total.............................................................. 451,435 409,370

272

Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

-122,394 -122,394 49,997 0.56 178,984 0.91 5 0.17 37,390 0.71 205 0.01 28,025 0.89 115,622 0.58 West Virginia West Virginia 96. Summary Statistics for Natural Gas West Virginia, 1992-1996 Table 1992 1993 1994 1995 1996 Reserves (billion cubic feet) Estimated Proved Reserves (dry) as of December 31 ....................................... 2,356 2,439 2,565 2,499 2,703 Number of Gas and Gas Condensate Wells Producing at End of Year.............................. 38,250 33,716 39,830 36,144 35,148 Production (million cubic feet) Gross Withdrawals From Gas Wells ......................................... E 182,000 171,024 183,773 186,231 178,984 From Oil Wells ........................................... 0 0 0 0 0 Total.............................................................. E 182,000 171,024 183,773 186,231 178,984 Repressuring ................................................

273

Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

134,294 32,451 0.37 0 0.00 32 1.09 43,764 0.83 10,456 0.38 39,786 1.26 126,488 0.63 C o n n e c t i c u t Connecticut 54. Summary Statistics for Natural Gas Connecticut, 1992-1996...

274

Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

73,669 73,669 141,300 1.59 221,822 1.12 3 0.10 46,289 0.88 33,988 1.24 31,006 0.98 252,585 1.26 A r k a n s a s Arkansas 51. Summary Statistics for Natural Gas Arkansas, 1992-1996 Table 1992 1993 1994 1995 1996 Reserves (billion cubic feet) Estimated Proved Reserves (dry) as of December 31 ....................................... 1,750 1,552 1,607 1,563 1,470 Number of Gas and Gas Condensate Wells Producing at End of Year.............................. 3,500 3,500 3,500 3,988 4,020 Production (million cubic feet) Gross Withdrawals From Gas Wells ......................................... 171,543 166,273 161,967 161,390 182,895 From Oil Wells ........................................... 39,364 38,279 33,446 33,979 41,551 Total.............................................................. 210,906 204,552 195,413 195,369 224,446 Repressuring ................................................

275

Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

-1,080,240 -1,080,240 201,024 2.27 1,734,887 8.78 133 4.54 76,629 1.46 136,436 4.99 46,152 1.46 460,373 2.30 O k l a h o m a Oklahoma 84. Summary Statistics for Natural Gas Oklahoma, 1992-1996 Table 1992 1993 1994 1995 1996 Reserves (billion cubic feet) Estimated Proved Reserves (dry) as of December 31 ....................................... 13,926 13,289 13,487 13,438 13,074 Number of Gas and Gas Condensate Wells Producing at End of Year.............................. 28,902 29,118 29,121 29,733 29,733 Production (million cubic feet) Gross Withdrawals From Gas Wells ......................................... 1,674,405 1,732,997 1,626,858 1,521,857 1,467,695 From Oil Wells ........................................... 342,950 316,945 308,006 289,877 267,192 Total.............................................................. 2,017,356 2,049,942 1,934,864

276

Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

7,038,115 7,038,115 3,528,911 39.78 13,646,477 69.09 183 6.24 408,861 7.80 1,461,718 53.49 281,452 8.91 5,681,125 28.40 West South Central West South Central 42. Summary Statistics for Natural Gas West South Central, 1992-1996 Table 1992 1993 1994 1995 1996 Reserves (billion cubic feet) Estimated Proved Reserves (dry) as of December 31 ....................................... 87,198 84,777 88,034 88,734 62,357 Number of Gas and Gas Condensate Wells Producing at End of Year.............................. 92,212 95,288 94,233 102,525 102,864 Production (million cubic feet) Gross Withdrawals From Gas Wells ......................................... 11,599,913 11,749,649 11,959,444 11,824,788 12,116,665 From Oil Wells ........................................... 2,313,831 2,368,395 2,308,634 2,217,752 2,151,247 Total..............................................................

277

Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

77,379 77,379 94,481 1.07 81,435 0.41 8 0.27 70,232 1.34 1,836 0.07 40,972 1.30 207,529 1.04 K e n t u c k y Kentucky 65. Summary Statistics for Natural Gas Kentucky, 1992-1996 Table 1992 1993 1994 1995 1996 Reserves (billion cubic feet) Estimated Proved Reserves (dry) as of December 31 ....................................... 1,084 1,003 969 1,044 983 Number of Gas and Gas Condensate Wells Producing at End of Year.............................. 12,483 12,836 13,036 13,311 13,501 Production (million cubic feet) Gross Withdrawals From Gas Wells ......................................... 79,690 86,966 73,081 74,754 81,435 From Oil Wells ........................................... 0 0 0 0 0 Total.............................................................. 79,690 86,966 73,081 74,754 81,435 Repressuring ................................................

278

Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

-67,648 -67,648 75,616 0.85 480,828 2.43 0 0.00 16,720 0.32 31,767 1.16 29,447 0.93 153,549 0.77 Pacific Noncontiguous Pacific Noncontiguous 45. Summary Statistics for Natural Gas Pacific Noncontiguous, 1992-1996 Table 1992 1993 1994 1995 1996 Reserves (billion cubic feet) Estimated Proved Reserves (dry) as of December 31 ....................................... 9,638 9,907 9,733 9,497 9,294 Number of Gas and Gas Condensate Wells Producing at End of Year.............................. 112 113 104 100 102 Production (million cubic feet) Gross Withdrawals From Gas Wells ......................................... 198,603 190,139 180,639 179,470 183,747 From Oil Wells ........................................... 2,427,110 2,588,202 2,905,261 3,190,433 3,189,837 Total.............................................................. 2,625,713 2,778,341

279

Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

-310,913 -310,913 110,294 1.24 712,796 3.61 2 0.07 85,376 1.63 22,607 0.83 57,229 1.81 275,508 1.38 K a n s a s Kansas 64. Summary Statistics for Natural Gas Kansas, 1992-1996 Table 1992 1993 1994 1995 1996 Reserves (billion cubic feet) Estimated Proved Reserves (dry) as of December 31 ....................................... 9,681 9,348 9,156 8,571 7,694 Number of Gas and Gas Condensate Wells Producing at End of Year.............................. 18,400 19,472 19,365 22,020 21,388 Production (million cubic feet) Gross Withdrawals From Gas Wells ......................................... 580,572 605,578 628,900 636,582 629,755 From Oil Wells ........................................... 79,169 82,579 85,759 86,807 85,876 Total.............................................................. 659,741 688,157 714,659 723,389 715,631 Repressuring ................................................

280

Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

819,046 819,046 347,043 3.91 245,740 1.24 40 1.36 399,522 7.62 32,559 1.19 201,390 6.38 980,555 4.90 M i c h i g a n Michigan 70. Summary Statistics for Natural Gas Michigan, 1992-1996 Table 1992 1993 1994 1995 1996 Reserves (billion cubic feet) Estimated Proved Reserves (dry) as of December 31 ....................................... 1,223 1,160 1,323 1,294 2,061 Number of Gas and Gas Condensate Wells Producing at End of Year.............................. 3,257 5,500 6,000 5,258 5,826 Production (million cubic feet) Gross Withdrawals From Gas Wells ......................................... 120,287 126,179 136,989 146,320 201,123 From Oil Wells ........................................... 80,192 84,119 91,332 97,547 50,281 Total.............................................................. 200,479 210,299 228,321 243,867 251,404 Repressuring ................................................

Note: This page contains sample records for the topic "gas processors associa" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

W W y o m i n g -775,410 50,253 0.57 666,036 3.37 14 0.48 13,534 0.26 87 0.00 9,721 0.31 73,609 0.37 Wyoming 98. Summary Statistics for Natural Gas Wyoming, 1992-1996 Table 1992 1993 1994 1995 1996 Reserves (billion cubic feet) Estimated Proved Reserves (dry) as of December 31 ....................................... 10,826 10,933 10,879 12,166 12,320 Number of Gas and Gas Condensate Wells Producing at End of Year.............................. 3,111 3,615 3,942 4,196 4,510 Production (million cubic feet) Gross Withdrawals From Gas Wells ......................................... 751,693 880,596 949,343 988,671 981,115 From Oil Wells ........................................... 285,125 142,006 121,519 111,442 109,434 Total.............................................................. 1,036,817 1,022,602 1,070,862 1,100,113 1,090,549 Repressuring

282

Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

-67,648 -67,648 75,616 0.85 480,828 2.43 0 0.00 16,179 0.31 31,767 1.16 27,315 0.86 150,877 0.75 A l a s k a Alaska 49. Summary Statistics for Natural Gas Alaska, 1992-1996 Table 1992 1993 1994 1995 1996 Reserves (billion cubic feet) Estimated Proved Reserves (dry) as of December 31 ....................................... 9,638 9,907 9,733 9,497 9,294 Number of Gas and Gas Condensate Wells Producing at End of Year.............................. 112 113 104 100 102 Production (million cubic feet) Gross Withdrawals From Gas Wells ......................................... 198,603 190,139 180,639 179,470 183,747 From Oil Wells ........................................... 2,427,110 2,588,202 2,905,261 3,190,433 3,189,837 Total.............................................................. 2,625,713 2,778,341 3,085,900 3,369,904 3,373,584 Repressuring

283

Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

628,189 628,189 449,511 5.07 765,699 3.88 100 3.41 528,662 10.09 39,700 1.45 347,721 11.01 1,365,694 6.83 West North Central West North Central 39. Summary Statistics for Natural Gas West North Central, 1992-1996 Table 1992 1993 1994 1995 1996 Reserves (billion cubic feet) Estimated Proved Reserves (dry) as of December 31 ....................................... 10,177 9,873 9,663 9,034 8,156 Number of Gas and Gas Condensate Wells Producing at End of Year.............................. 18,569 19,687 19,623 22,277 21,669 Production (million cubic feet) Gross Withdrawals From Gas Wells ......................................... 594,551 626,728 651,594 655,917 648,822 From Oil Wells ........................................... 133,335 135,565 136,468 134,776 133,390 Total.............................................................. 727,886 762,293

284

Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

1,048,760 1,048,760 322,661 3.64 18,131 0.09 54 1.84 403,264 7.69 142,688 5.22 253,075 8.01 1,121,742 5.61 N e w Y o r k New York 80. Summary Statistics for Natural Gas New York, 1992-1996 Table 1992 1993 1994 1995 1996 Reserves (billion cubic feet) Estimated Proved Reserves (dry) as of December 31 ....................................... 329 264 242 197 232 Number of Gas and Gas Condensate Wells Producing at End of Year.............................. 5,906 5,757 5,884 6,134 6,208 Production (million cubic feet) Gross Withdrawals From Gas Wells ......................................... 22,697 20,587 19,937 17,677 17,494 From Oil Wells ........................................... 824 610 539 723 641 Total.............................................................. 23,521 21,197 20,476 18,400 18,134 Repressuring ................................................

285

Natural Gas  

Annual Energy Outlook 2012 (EIA)

3.91 119,251 0.60 229 7.81 374,824 7.15 2,867 0.10 189,966 6.01 915,035 4.57 O h i o Ohio 83. Summary Statistics for Natural Gas Ohio, 1992-1996 Table 1992 1993 1994 1995 1996...

286

Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

0 0.00 53 1.81 147,893 2.82 7,303 0.27 93,816 2.97 398,581 1.99 W i s c o n s i n Wisconsin 97. Summary Statistics for Natural Gas Wisconsin, 1992-1996 Table 1992 1993 1994...

287

Gas Prices  

NLE Websites -- All DOE Office Websites (Extended Search)

Prices Gasoline Prices for U.S. Cities Click on the map to view gas prices for cities in your state. AK VT ME NH NH MA MA RI CT CT DC NJ DE DE NY WV VA NC SC FL GA AL MS TN KY IN...

288

Natural Gas  

Annual Energy Outlook 2012 (EIA)

10,799 1,953 0.02 0 0.00 0 0.00 2,523 0.05 24 0.00 2,825 0.09 7,325 0.04 V e r m o n t Vermont 93. Summary Statistics for Natural Gas Vermont, 1992-1996 Table 1992 1993 1994 1995...

289

Natural Gas  

Annual Energy Outlook 2012 (EIA)

845,998 243,499 2.75 135,000 0.68 35 1.19 278,606 5.32 7,239 0.26 154,642 4.90 684,022 3.42 P e n n s y l v a n i a Pennsylvania 86. Summary Statistics for Natural Gas...

290

Unconventional Natural Gas  

NLE Websites -- All DOE Office Websites (Extended Search)

Natural Gas Unconventional Natural Gas Los Alamos scientists are committed to the efficient and environmentally-safe development of major U.S. natural gas and oil resources....

291

Underground Natural Gas Storage  

U.S. Energy Information Administration (EIA)

Underground Natural Gas Storage. Measured By. Disseminated Through. Monthly Survey of Storage Field Operators -- asking injections, withdrawals, base gas, working gas.

292

,"Texas Natural Gas Summary"  

U.S. Energy Information Administration (EIA) Indexed Site

Natural Gas Wellhead Price (Dollars per Thousand Cubic Feet)","Texas Natural Gas Imports Price (Dollars per Thousand Cubic Feet)","Price of Texas Natural Gas Exports...

293

,"Mississippi Natural Gas Summary"  

U.S. Energy Information Administration (EIA) Indexed Site

Natural Gas Wellhead Price (Dollars per Thousand Cubic Feet)","Mississippi Natural Gas Imports Price All Countries (Dollars per Thousand Cubic Feet)","Mississippi Natural Gas...

294

,"Montana Natural Gas Summary"  

U.S. Energy Information Administration (EIA) Indexed Site

Natural Gas Wellhead Price (Dollars per Thousand Cubic Feet)","Montana Natural Gas Imports Price (Dollars per Thousand Cubic Feet)","Price of Montana Natural Gas Exports...

295

,"Michigan Natural Gas Summary"  

U.S. Energy Information Administration (EIA) Indexed Site

Natural Gas Wellhead Price (Dollars per Thousand Cubic Feet)","Michigan Natural Gas Imports Price (Dollars per Thousand Cubic Feet)","Price of Michigan Natural Gas Exports...

296

2. Gas Productive Capacity  

U.S. Energy Information Administration (EIA)

2. Gas Productive Capacity Gas Capacity to Meet Lower 48 States Requirements The United States has sufficient dry gas productive capacity at the wellhead to meet ...

297

Carbon sequestration in natural gas reservoirs: Enhanced gas recovery and natural gas storage  

E-Print Network (OSTI)

by numerical simulation below. pipeline gas shalecushion gas sand shale CH4 working gas CH4 working gas sand

Oldenburg, Curtis M.

2003-01-01T23:59:59.000Z

298

GAS SEAL  

DOE Patents (OSTI)

A seal is described for a cover closing an opening in the top of a pressure vessel that may house a nuclear reactor. The seal comprises a U-shaped trough formed on the pressure vessel around the opening therein, a mass of metal in the trough, and an edge flange on the cover extending loosely into the trough and dipping into the metal mass. The lower portion of the metal mass is kept melted, and the upper portion, solid. The solid pontion of the metal mass prevents pressure surges in the vessel from expelling the liquid portion of the metal mass from the trough; the liquld portion, thus held in place by the solid portion, does not allow gas to go through, and so gas cannot escape through shrinkage holes in the solid portion.

Monson, H.; Hutter, E.

1961-07-11T23:59:59.000Z

299

Shale gas is natural gas trapped inside  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Shale gas is natural gas trapped inside formations of shale - fine grained sedimentary rocks that can be rich sources of petroleum and natural gas. Just a few years ago, much of...

300

Implementation of ITU-T V.90 standard PCM modem in TMS320C6201 digital signal processor  

E-Print Network (OSTI)

In this thesis work, the basic functionality of a ITU-T Standard V.90 modem is implemented in a TMS320C6201 Digital Signal Processor (DSP). The encoder, equalizer and decoder functions of a V.90 modem are programmed in the DSP using C language. The program has been written to analyze the performance of the modem functions using standard algorithms. The standard V.90 modulus encoder and an easy but effective constellation selection technique have been implemented. In the receiver side, two different equalization techniques are implemented and their performance in the DSP is compared. The cycle timing of the functions has been benchmarked. The pseudo real-time implementation for the equalizers shows significant functional aspects of the equalizer. The real-time observation technique showed that the RLS equalization algorithm performance was much better than the simple LMS approach.

Molla, Shahedolla Mohammed

2001-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "gas processors associa" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Number of Gas and Gas Condensate Wells  

Annual Energy Outlook 2012 (EIA)

5 2000 2001 2002 2003 2004 Number of Gas and Gas Condensate Wells Producing at End of Year ... 152 170 165 195 224 Production (million cubic feet)...

302

Number of Gas and Gas Condensate Wells  

Gasoline and Diesel Fuel Update (EIA)

9 2000 2001 2002 2003 2004 Number of Gas and Gas Condensate Wells Producing at End of Year ... 280 300 225 240 251 Production (million cubic feet)...

303

Natural Gas Gross Withdrawals from Gas Wells  

U.S. Energy Information Administration (EIA)

Natural Gas Gross Withdrawals and Production (Volumes in Million Cubic Feet) Data Series: ... coalbed production data are included in Gas Well totals.

304

Natural Gas Gross Withdrawals from Gas Wells  

U.S. Energy Information Administration (EIA) Indexed Site

Withdrawals from Gas Wells Gross Withdrawals from Oil Wells Gross Withdrawals from Shale Gas Wells Gross Withdrawals from Coalbed Wells Repressuring Vented and Flared...

305

Natural Gas Vehicles  

Energy.gov (U.S. Department of Energy (DOE))

Natural gas vehicles (NGVs) are either fueled exclusively with compressed natural gas or liquefied natural gas (dedicated NGVs) or are capable of natural gas and gasoline fueling (bi-fuel NGVs).

306

Natural Gas Monthly  

Annual Energy Outlook 2012 (EIA)

Gas: Gas in place at the time that a reservoir was converted to use as an underground storage reservoir, as in contrast to injected gas volumes. Natural Gas: A gaseous mixture...

307

Architectures of flexible symmetric key crypto engines—a survey: From hardware coprocessor to multi-crypto-processor system on chip  

Science Conference Proceedings (OSTI)

Throughput, flexibility, and security form the design trilogy of reconfigurable crypto engines; they must be carefully considered without reducing the major role of classical design constraints, such as surface, power consumption, dependability, and ... Keywords: Cryptosystems, crypto MPSoC, crypto array, crypto coprocessor, crypto processor, reconfigurable architecture

Lilian Bossuet, Michael Grand, Lubos Gaspar, Viktor Fischer, Guy Gogniat

2013-08-01T23:59:59.000Z

308

Gas Metrology Portal  

Science Conference Proceedings (OSTI)

... automobile industry meeting more stringent … more. Audit of EPA Protocol Gas Suppliers EPA Protocol gas mixture calibration ...

2012-12-19T23:59:59.000Z

309

Energy Information Directory of the Energy Information Administration  

U.S. Energy Information Administration (EIA)

Gas processing - safety practices; Gas processing - testing procedures; Gas Processors Association; Gas Research Institute; Gas Technology Institute; Gas transmission;

310

Fuel gas conditioning process  

DOE Patents (OSTI)

A process for conditioning natural gas containing C.sub.3+ hydrocarbons and/or acid gas, so that it can be used as combustion fuel to run gas-powered equipment, including compressors, in the gas field or the gas processing plant. Compared with prior art processes, the invention creates lesser quantities of low-pressure gas per unit volume of fuel gas produced. Optionally, the process can also produce an NGL product.

Lokhandwala, Kaaeid A. (Union City, CA)

2000-01-01T23:59:59.000Z

311

English-Spanish glossary: offshore exploration and production, gas processing, and valves  

Science Conference Proceedings (OSTI)

This series of articles contains 3 different English-Spanish glossaries of related terms used in the oil industry. The glossary of the offshore exploration and production involves a summary of terms used in the offshore oil activity. It also includes names of singular equipment used in offshore drilling, as well as several navigation terms in relation to the floating oil structures. With the help of the Gas Processors Association it was possible to compile a glossary of gas processing with a concise selection of common terms of the industry of gas processing. The glossary of valves includes more than 200 terms of the industry of valves in a specialized glossary, and several explanations about the application and operation of valves.

Not Available

1981-12-01T23:59:59.000Z

312

Texas Natural Gas Gross Withdrawals from Gas Wells (Million Cubic...  

U.S. Energy Information Administration (EIA) Indexed Site

View History: Monthly Annual Download Data (XLS File) Texas Natural Gas Gross Withdrawals from Gas Wells (Million Cubic Feet) Texas Natural Gas Gross Withdrawals from Gas Wells...

313

Lake Charles, LA Natural Gas Liquefied Natural Gas Imports from...  

Gasoline and Diesel Fuel Update (EIA)

Lake Charles, LA Natural Gas Liquefied Natural Gas Imports from Trinidad and Tobago (Million Cubic Feet) Lake Charles, LA Natural Gas Liquefied Natural Gas Imports from Trinidad...

314

Cameron, LA Natural Gas Liquefied Natural Gas Imports from Trinidad...  

Gasoline and Diesel Fuel Update (EIA)

Natural Gas Liquefied Natural Gas Imports from Trinidad and Tobago (Million Cubic Feet) Cameron, LA Natural Gas Liquefied Natural Gas Imports from Trinidad and Tobago (Million...

315

Savine Pass, LA Natural Gas Liquefied Natural Gas Imports from...  

Annual Energy Outlook 2012 (EIA)

Savine Pass, LA Natural Gas Liquefied Natural Gas Imports from Trinidad and Tobago (Million Cubic Feet) Savine Pass, LA Natural Gas Liquefied Natural Gas Imports from Trinidad and...

316

Golden Pass, TX Natural Gas Liquefied Natural Gas Imports (price...  

Gasoline and Diesel Fuel Update (EIA)

Golden Pass, TX Natural Gas Liquefied Natural Gas Imports (price) (Dollars per Thousand Cubic Feet) Golden Pass, TX Natural Gas Liquefied Natural Gas Imports (price) (Dollars per...

317

North Dakota Natural Gas Gross Withdrawals from Shale Gas (Million...  

Gasoline and Diesel Fuel Update (EIA)

Monthly Annual Download Data (XLS File) North Dakota Natural Gas Gross Withdrawals from Shale Gas (Million Cubic Feet) North Dakota Natural Gas Gross Withdrawals from Shale Gas...

318

Oklahoma Natural Gas Gross Withdrawals from Shale Gas (Million...  

Gasoline and Diesel Fuel Update (EIA)

Monthly Annual Download Data (XLS File) Oklahoma Natural Gas Gross Withdrawals from Shale Gas (Million Cubic Feet) Oklahoma Natural Gas Gross Withdrawals from Shale Gas...

319

Arkansas Natural Gas Gross Withdrawals from Shale Gas (Million...  

U.S. Energy Information Administration (EIA) Indexed Site

Monthly Annual Download Data (XLS File) Arkansas Natural Gas Gross Withdrawals from Shale Gas (Million Cubic Feet) Arkansas Natural Gas Gross Withdrawals from Shale Gas...

320

Montana Natural Gas Gross Withdrawals from Shale Gas (Million...  

Gasoline and Diesel Fuel Update (EIA)

Monthly Annual Download Data (XLS File) Montana Natural Gas Gross Withdrawals from Shale Gas (Million Cubic Feet) Montana Natural Gas Gross Withdrawals from Shale Gas (Million...

Note: This page contains sample records for the topic "gas processors associa" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Ohio Natural Gas Gross Withdrawals from Shale Gas (Million Cubic...  

U.S. Energy Information Administration (EIA) Indexed Site

Monthly Annual Download Data (XLS File) Ohio Natural Gas Gross Withdrawals from Shale Gas (Million Cubic Feet) Ohio Natural Gas Gross Withdrawals from Shale Gas (Million...

322

Wyoming Natural Gas Gross Withdrawals from Shale Gas (Million...  

Gasoline and Diesel Fuel Update (EIA)

Monthly Annual Download Data (XLS File) Wyoming Natural Gas Gross Withdrawals from Shale Gas (Million Cubic Feet) Wyoming Natural Gas Gross Withdrawals from Shale Gas (Million...

323

Virginia Natural Gas Gross Withdrawals from Shale Gas (Million...  

U.S. Energy Information Administration (EIA) Indexed Site

Monthly Annual Download Data (XLS File) Virginia Natural Gas Gross Withdrawals from Shale Gas (Million Cubic Feet) Virginia Natural Gas Gross Withdrawals from Shale Gas...

324

Pennsylvania Natural Gas Gross Withdrawals from Shale Gas (Million...  

Annual Energy Outlook 2012 (EIA)

Monthly Annual Download Data (XLS File) Pennsylvania Natural Gas Gross Withdrawals from Shale Gas (Million Cubic Feet) Pennsylvania Natural Gas Gross Withdrawals from Shale Gas...

325

California Natural Gas Gross Withdrawals from Shale Gas (Million...  

Gasoline and Diesel Fuel Update (EIA)

Monthly Annual Download Data (XLS File) California Natural Gas Gross Withdrawals from Shale Gas (Million Cubic Feet) California Natural Gas Gross Withdrawals from Shale Gas...

326

New Mexico Natural Gas Gross Withdrawals from Shale Gas (Million...  

Annual Energy Outlook 2012 (EIA)

Monthly Annual Download Data (XLS File) New Mexico Natural Gas Gross Withdrawals from Shale Gas (Million Cubic Feet) New Mexico Natural Gas Gross Withdrawals from Shale Gas...

327

Louisiana Natural Gas Gross Withdrawals from Shale Gas (Million...  

U.S. Energy Information Administration (EIA) Indexed Site

Monthly Annual Download Data (XLS File) Louisiana Natural Gas Gross Withdrawals from Shale Gas (Million Cubic Feet) Louisiana Natural Gas Gross Withdrawals from Shale Gas...

328

West Virginia Natural Gas Gross Withdrawals from Shale Gas (Million...  

Annual Energy Outlook 2012 (EIA)

Annual Download Data (XLS File) West Virginia Natural Gas Gross Withdrawals from Shale Gas (Million Cubic Feet) West Virginia Natural Gas Gross Withdrawals from Shale Gas...

329

Michigan Natural Gas Gross Withdrawals from Shale Gas (Million...  

Gasoline and Diesel Fuel Update (EIA)

Monthly Annual Download Data (XLS File) Michigan Natural Gas Gross Withdrawals from Shale Gas (Million Cubic Feet) Michigan Natural Gas Gross Withdrawals from Shale Gas...

330

Texas Natural Gas Gross Withdrawals from Shale Gas (Million Cubic...  

Annual Energy Outlook 2012 (EIA)

Monthly Annual Download Data (XLS File) Texas Natural Gas Gross Withdrawals from Shale Gas (Million Cubic Feet) Texas Natural Gas Gross Withdrawals from Shale Gas (Million...

331

Colorado Natural Gas Gross Withdrawals from Shale Gas (Million...  

Gasoline and Diesel Fuel Update (EIA)

Monthly Annual Download Data (XLS File) Colorado Natural Gas Gross Withdrawals from Shale Gas (Million Cubic Feet) Colorado Natural Gas Gross Withdrawals from Shale Gas...

332

Savine Pass, LA Natural Gas Liquefied Natural Gas Imports from...  

U.S. Energy Information Administration (EIA) Indexed Site

Savine Pass, LA Natural Gas Liquefied Natural Gas Imports from Egypt (Million Cubic Feet) Savine Pass, LA Natural Gas Liquefied Natural Gas Imports from Egypt (Million Cubic Feet)...

333

Highgate Springs, VT Natural Gas Liquefied Natural Gas Imports...  

U.S. Energy Information Administration (EIA) Indexed Site

Highgate Springs, VT Natural Gas Liquefied Natural Gas Imports from Canada (Million Cubic Feet) Highgate Springs, VT Natural Gas Liquefied Natural Gas Imports from Canada (Million...

334

Northeast Gateway, LA Natural Gas Liquefied Natural Gas Imports...  

U.S. Energy Information Administration (EIA) Indexed Site

Gateway, LA Natural Gas Liquefied Natural Gas Imports from Egypt (Million Cubic Feet) Northeast Gateway, LA Natural Gas Liquefied Natural Gas Imports from Egypt (Million Cubic...

335

South Dakota Natural Gas Withdrawals from Gas Wells (Million...  

Annual Energy Outlook 2012 (EIA)

View History: Monthly Annual Download Data (XLS File) South Dakota Natural Gas Withdrawals from Gas Wells (Million Cubic Feet) South Dakota Natural Gas Withdrawals from Gas Wells...

336

South Dakota Natural Gas Removed from Natural Gas (Million Cubic...  

U.S. Energy Information Administration (EIA) Indexed Site

View History: Monthly Annual Download Data (XLS File) South Dakota Natural Gas Removed from Natural Gas (Million Cubic Feet) South Dakota Natural Gas Removed from Natural Gas...

337

Reforming of Liquid Hydrocarbons in a Novel Hydrogen-Selective Membrane-Based Fuel Processor  

DOE Green Energy (OSTI)

In this work, asymmetric dense Pd/porous stainless steel composite membranes were fabricated by depositing palladium on the outer surface of the tubular support. The electroless plating method combined with an osmotic pressure field was used to deposit the palladium film. Surface morphology and microstructure of the composite membranes were characterized by SEM and EDX. The SEM and EDX analyses revealed strong adhesion of the plated pure palladium film on the substrate and dense coalescence of the Pd film. Membranes were further characterized by conducting permeability experiments with pure hydrogen, nitrogen, and helium gases at temperatures from 325 to 450 C and transmembrane pressure differences from 5 to 45 psi. The permeation results showed that the fabricated membranes have both high hydrogen permeability and selectivity. For example, the hydrogen permeability for a composite membrane with a 20 {micro}m Pd film was 3.02 x 10{sup -5} moles/m{sup 2}.s.Pa{sup 0.765} at 450 C. Hydrogen/nitrogen selectivity for this composite membrane was 1000 at 450 C with a transmembrane pressure difference of 14.7 psi. Steam reforming of methane is one of the most important chemical processes in hydrogen and syngas production. To investigate the usefulness of palladium-based composite membranes in membrane-reactor configuration for simultaneous production and separation of hydrogen, steam reforming of methane by equilibrium shift was studied. The steam reforming of methane using a packed-bed inert membrane tubular reactor (PBIMTR) was simulated. A two-dimensional pseudo-homogeneous reactor model with parallel flow configuration was developed for steam reforming of methane. The shell volume was taken as the feed and sweep gas was fed to the inside of the membrane tube. Radial diffusion was taken into account for concentration gradient in the radial direction due to hydrogen permeation through the membrane. With appropriate reaction rate expressions, a set of partial differential equations was derived using the continuity equation for the reaction system and then solved by finite difference method with appropriate boundary and initial conditions. An iterative scheme was used to obtain a converged solution. Membrane reactor performance was compared to that in a traditional non-membrane packed-bed reactor (PBR). Their performances were also compared with thermodynamic equilibrium values achievable in a conventional non-membrane reactor. Numerical results of the models show that the methane conversions in the PBIMTR are always higher than that in the PBR, as well as thermodynamic equilibrium conversions. For instance, at a reaction pressure of 6 atm, a temperature of 650 C, a space velocity of 900/16.0 SCCM/gm{sub cat}, a steam to methane molar feed ratio of 3.0, a sweep ratio of 0.15, the conversion in the membrane reactor is about 86.5%, while the conversion in the non-membrane reactor is about 50.8%. The corresponding equilibrium conversion is about 56.4%. The effects on the degree of conversion and hydrogen yield were analyzed for different parameters such as temperature, reactor pressure, feed and sweep flow rate, feed molar ratio, and space time. From the analysis of the model results, it is obvious that the membrane reactor operation can be optimized for conversion or yield through the choice of proper operating and design parameters. Comparisons with available literature data for both membrane and non-membrane reactors showed a good agreement.

Shamsuddin Ilias

2006-03-10T23:59:59.000Z

338

Space-charge-dominated beam dynamics simulations using the massively parallel processors (MPPs) of the Cray T3D  

Science Conference Proceedings (OSTI)

Computer simulations using the multi-particle code PARMELA with a three-dimensional point-by-point space charge algorithm have turned out to be very helpful in supporting injector commissioning and operations at Thomas Jefferson National Accelerator Facility (Jefferson Lab, formerly called CEBAF). However, this algorithm, which defines a typical N{sup 2} problem in CPU time scaling, is very time-consuming when N, the number of macro-particles, is large. Therefore, it is attractive to use massively parallel processors (MPPs) to speed up the simulations. Motivated by this, the authors modified the space charge subroutine for using the MPPs of the Cray T3D. The techniques used to parallelize and optimize the code on the T3D are discussed in this paper. The performance of the code on the T3D is examined in comparison with a Parallel Vector Processing supercomputer of the Cray C90 and an HP 735/15 high-end workstation.

Liu, H.

1996-10-01T23:59:59.000Z

339

Method and apparatus for combinatorial logic signal processor in a digitally based high speed x-ray spectrometer  

DOE Patents (OSTI)

A high speed, digitally based, signal processing system which accepts a digitized input signal and detects the presence of step-like pulses in the this data stream, extracts filtered estimates of their amplitudes, inspects for pulse pileup, and records input pulse rates and system livetime. The system has two parallel processing channels: a slow channel, which filters the data stream with a long time constant trapezoidal filter for good energy resolution; and a fast channel which filters the data stream with a short time constant trapezoidal filter, detects pulses, inspects for pileups, and captures peak values from the slow channel for good events. The presence of a simple digital interface allows the system to be easily integrated with a digital processor to produce accurate spectra at high count rates and allow all spectrometer functions to be fully automated. Because the method is digitally based, it allows pulses to be binned based on time related values, as well as on their amplitudes, if desired.

Warburton, William K. (1300 Mills St., Menlo Park, CA 94025); Zhou, Zhiquing (Carl) (Fremont, CA)

1999-01-01T23:59:59.000Z

340

Number of Gas and Gas Condensate Wells  

Annual Energy Outlook 2012 (EIA)

3 2000 2001 2002 2003 2004 Number of Gas and Gas Condensate Wells Producing at End of Year ... 22,442 22,117 23,554 18,774 16,718 Production...

Note: This page contains sample records for the topic "gas processors associa" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Number of Gas and Gas Condensate Wells  

Annual Energy Outlook 2012 (EIA)

2004 1 2000 2001 2002 2003 2004 Number of Gas and Gas Condensate Wells Producing at End of Year... 341,678 373,304 387,772 393,327 405,048 Production...

342

Number of Gas and Gas Condensate Wells  

Gasoline and Diesel Fuel Update (EIA)

1 2000 2001 2002 2003 2004 Number of Gas and Gas Condensate Wells Producing at End of Year ... 1,169 1,244 1,232 1,249 1,272 Production (million...

343

DOE Fuel Cell Pre-Solicitation Workshop - Breakout Group 4: Low Temperature Fuel Cell System BOP & FUEL Processors For Stationary and Automotive  

NLE Websites -- All DOE Office Websites (Extended Search)

BREAKOUT GROUP 4: LOW TEMPERATURE FUEL CELL SYSTEM BOP & FUEL PROCESSORS FOR STATIONARY AND AUTOMOTIVE BREAKOUT GROUP 4: LOW TEMPERATURE FUEL CELL SYSTEM BOP & FUEL PROCESSORS FOR STATIONARY AND AUTOMOTIVE PARTICIPANTS O NAME RGANIZATION Shabbir Ahmed Argonne National Laboratory Chris Ainscough NUVERA Rod Borup Los Alamos National Laboratory Vince Contini Battelle Rick Cutright PlugPower LLC David Frank Hydrogenics Jamie Holladay Pacific Northwest National Laboratory Terry Johnson Sandia National Laboratory Sridhas Kanuri UTC Power Ted Krause Argonne National Laboratory Michael McCarthy Protonex Technology Corporation Pinakin Patel FuelCell Energy Inc. Dennis Rapodios Argonne National Laboratory Eric Simpkins IdaTech LLC Anna Stefanopoulou University of Michigan Ken Stroh Los Alamos National Laboratory Olivier Verdu HELION Doug Wheeler National Renewable Energy Laboratory

344

Gas Slit Camera (GSC) onboard MAXI on ISS  

E-Print Network (OSTI)

The Gas Slit Camera (GSC) is an X-ray instrument on the MAXI (Monitor of All-sky X-ray Image) mission on the International Space Station. It is designed to scan the entire sky every 92-minute orbital period in the 2--30 keV band and to achieve the highest sensitivity among the X-ray all-sky monitors ever flown so far. The GSC employs large-area position-sensitive proportional counters with the total detector area of 5350 cm$^2$. The on-board data processor has functions to format telemetry data as well as to control the high voltage of the proportional counters to protect them from the particle irradiation. The paper describes the instruments, on-board data processing, telemetry data formats, and performance specifications expected from the ground calibration tests.

Mihara, Tatehiro; Sugizaki, Mutsumi; Serino, Motoko; Matsuoka, Masaru; Kohama, Mitsuhiro; Kawasaki, Kazuyoshi; Tomida, Hiroshi; Ueno, Shiro; Kawai, Nobuyuki; Kataoka, Jun; Morii, Mikio; Yoshida, Atsumasa; Yamaoka, Kazutaka; Nakahira, Satoshi; Negoro, Hitoshi; Isobe, Naoki; Yamauchi, Makoto; Sakurai, Ikuya

2011-01-01T23:59:59.000Z

345

Gas Utilities (New York)  

Energy.gov (U.S. Department of Energy (DOE))

This chapter regulates natural gas utilities in the State of New York, and describes standards and procedures for gas meters and accessories, gas quality, line and main extensions, transmission and...

346

Gas amplified ionization detector for gas chromatography  

DOE Patents (OSTI)

A gas-amplified ionization detector for gas chromatography which possesses increased sensitivity and a very fast response time is described. Solutes eluding from a gas chromatographic column are ionized by uv photoionization of matter eluting therefrom. The detector is capable of generating easily measured voltage signals by gas amplification/multiplication of electron products resulting from the uv photoionization of at least a portion of each solute passing through the detector. 4 figs.

Huston, G.C.

1989-11-27T23:59:59.000Z

347

ComEd, Nicor Gas, Peoples Gas and North Shore Gas - Bonus Rebate...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ComEd, Nicor Gas, Peoples Gas and North Shore Gas - Bonus Rebate Program (Illinois) ComEd, Nicor Gas, Peoples Gas and North Shore Gas - Bonus Rebate Program (Illinois) Eligibility...

348

South Dakota Natural Gas Number of Gas and Gas Condensate Wells...  

U.S. Energy Information Administration (EIA) Indexed Site

View History: Annual Download Data (XLS File) South Dakota Natural Gas Number of Gas and Gas Condensate Wells (Number of Elements) South Dakota Natural Gas Number of Gas and Gas...

349

International Energy Outlook - Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

Natural Gas International Energy Outlook 2004 Natural Gas Natural gas is the fastest growing primary energy source in the IEO2004 forecast. Consumption of natural gas is projected...

350

Multi-cluster processor operating only select number of clusters during each phase based on program statistic monitored at predetermined intervals  

DOE Patents (OSTI)

In a processor having multiple clusters which operate in parallel, the number of clusters in use can be varied dynamically. At the start of each program phase, the configuration option for an interval is run to determine the optimal configuration, which is used until the next phase change is detected. The optimum instruction interval is determined by starting with a minimum interval and doubling it until a low stability factor is reached.

Balasubramonian, Rajeev (Sandy, UT); Dwarkadas, Sandhya (Rochester, NY); Albonesi, David (Ithaca, NY)

2009-02-10T23:59:59.000Z

351

Natural Gas Annual Archives  

U.S. Energy Information Administration (EIA)

Petroleum & Other Liquids. Crude oil, gasoline, heating oil, diesel, propane, and other liquids including biofuels and natural gas liquids. Natural Gas

352

Liquefied Natural Gas  

U.S. Energy Information Administration (EIA)

Petroleum & Other Liquids. Crude oil, gasoline, heating oil, diesel, propane, and other liquids including biofuels and natural gas liquids. Natural Gas

353

EIA - Natural Gas Publications  

Annual Energy Outlook 2012 (EIA)

and a weather snapshot. Monthly Natural Gas Monthly Natural and supplemental gas production, supply, consumption, disposition, storage, imports, exports, and prices in the...

354

Natural Gas Annual 2005  

U.S. Energy Information Administration (EIA)

Oil and Gas Field Code Master List ... Hawaii, 2001-2005 ... Energy Information Administration/Natural Gas Annual 2005 vii 54.

355

Natural Gas Exports (Summary)  

U.S. Energy Information Administration (EIA)

Estimates for Canadian pipeline volumes are derived from the Office of Fossil Energy, Natural Gas Imports and Exports, and EIA estimates of dry natural gas imports.

356

Gas scrubbing liquids  

DOE Patents (OSTI)

Fully chlorinated and/or fluorinated hydrocarbons are used as gas scrubbing liquids for preventing noxious gas emissions to the atmosphere.

Lackey, Walter J. (Oak Ridge, TN); Lowrie, Robert S. (Oak Ridge, TN); Sease, John D. (Knoxville, TN)

1981-01-01T23:59:59.000Z

357

Natural Gas Processed  

U.S. Energy Information Administration (EIA) Indexed Site

Gross Withdrawals From Gas Wells Gross Withdrawals From Oil Wells Gross Withdrawals From Shale Gas Wells Gross Withdrawals From Coalbed Wells Repressuring Nonhydrocarbon Gases...

358

Natural Gas Weekly Update  

Annual Energy Outlook 2012 (EIA)

natural gas prices, successful application of horizontal drilling, and hydraulic fracturing, as well as significant investments made by natural gas companies in production...

359

Natural Gas Dry Production  

U.S. Energy Information Administration (EIA) Indexed Site

Withdrawals from Gas Wells Gross Withdrawals from Oil Wells Gross Withdrawals from Shale Gas Wells Gross Withdrawals from Coalbed Wells Repressuring Vented and Flared...

360

Natural Gas Production  

U.S. Energy Information Administration (EIA)

Natural Gas Production. Measured By. Disseminated Through. Survey of Producing States and Mineral Management Service “Evolving Estimate” in Natural Gas Monthly.

Note: This page contains sample records for the topic "gas processors associa" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Natural Gas Weekly Update  

Annual Energy Outlook 2012 (EIA)

7, 2009 Next Release: May 14, 2009 Overview Prices Storage Other Market Trends Natural Gas Transportation Update Overview (For the Week Ending Wednesday, May 6, 2009) Natural gas...

362

February Natural Gas Monthly  

Annual Energy Outlook 2012 (EIA)

Gas Annual. Preliminary Monthly Data Preliminary monthly data in the "balancing item" cat- egory are calculated by subtracting dry gas production, withdrawals from storage,...

363

November Natural Gas Monthly  

Annual Energy Outlook 2012 (EIA)

Gas Annual. Preliminary Monthly Data Preliminary monthly data in the "balancing item" cat- egory are calculated by subtracting dry gas production, withdrawals from storage,...

364

January Natural Gas Monthly  

Annual Energy Outlook 2012 (EIA)

Gas Annual. Preliminary Monthly Data Preliminary monthly data in the "balancing item" cat- egory are calculated by subtracting dry gas production, withdrawals from storage,...

365

March Natural Gas Monthly  

Gasoline and Diesel Fuel Update (EIA)

Gas Annual. Preliminary Monthly Data Preliminary monthly data in the "balancing item" cat- egory are calculated by subtracting dry gas production, withdrawals from storage,...

366

May Natural Gas Monthly  

Annual Energy Outlook 2012 (EIA)

Gas Annual. Preliminary Monthly Data Preliminary monthly data in the "balancing item" cat- egory are calculated by subtracting dry gas production, withdrawals from storage,...

367

CONTINUOUS GAS ANALYZER  

DOE Patents (OSTI)

A reagent gas and a sample gas are chemically combined on a continuous basis in a reaction zone maintained at a selected temperature. The reagent gas and the sample gas are introduced to the reaction zone at preselected. constant molar rates of flow. The reagent gas and the selected gas in the sample mixture combine in the reaction zone to form a product gas having a different number of moles from the sum of the moles of the reactants. The difference in the total molar rates of flow into and out of the reaction zone is measured and indicated to determine the concentration of the selected gas.

Katz, S.; Weber, C.W.

1960-02-16T23:59:59.000Z

368

Historical Natural Gas Annual  

Annual Energy Outlook 2012 (EIA)

8 The Historical Natural Gas Annual contains historical information on supply and disposition of natural gas at the national, regional, and State level as well as prices at...

369

Historical Natural Gas Annual  

Gasoline and Diesel Fuel Update (EIA)

7 The Historical Natural Gas Annual contains historical information on supply and disposition of natural gas at the national, regional, and State level as well as prices at...

370

Historical Natural Gas Annual  

Annual Energy Outlook 2012 (EIA)

6 The Historical Natural Gas Annual contains historical information on supply and disposition of natural gas at the national, regional, and State level as well as prices at...

371

Natural gas production from Arctic gas hydrates  

Science Conference Proceedings (OSTI)

The natural gas hydrates of the Messoyakha field in the West Siberian basin of Russia and those of the Prudhoe Bay-Kuparuk River area on the North Slope of Alaska occur within a similar series of interbedded Cretaceous and Tertiary sandstone and siltstone reservoirs. Geochemical analyses of gaseous well-cuttings and production gases suggest that these two hydrate accumulations contain a mixture of thermogenic methane migrated from a deep source and shallow, microbial methane that was either directly converted to gas hydrate or was first concentrated in existing traps and later converted to gas hydrate. Studies of well logs and seismic data have documented a large free-gas accumulation trapped stratigraphically downdip of the gas hydrates in the Prudhoe Bay-Kuparuk River area. The presence of a gas-hydrate/free-gas contact in the Prudhoe Bay-Kuparuk River area is analogous to that in the Messoyakha gas-hydrate/free-gas accumulation, from which approximately 5.17x10[sup 9] cubic meters (183 billion cubic feet) of gas have been produced from the hydrates alone. The apparent geologic similarities between these two accumulations suggest that the gas-hydrated-depressurization production method used in the Messoyakha field may have direct application in northern Alaska. 30 refs., 15 figs., 3 tabs.

Collett, T.S. (Geological Survey, Denver, CO (United States))

1993-01-01T23:59:59.000Z

372

EIA - Natural Gas Pipeline Network - Natural Gas Pipeline Mileage...  

U.S. Energy Information Administration (EIA) Indexed Site

Home > Natural Gas > About U.S. Natural Gas Pipelines > Natural Gas Pipeline Mileage by State About U.S. Natural Gas Pipelines - Transporting Natural Gas based on data through...

373

Transportation and Greenhouse Gas Mitigation  

E-Print Network (OSTI)

fuels (eg diesel, compressed natural gas). Electricity (infossil fuels, such as compressed natural gas and liquefied

Lutsey, Nicholas P.; Sperling, Dan

2008-01-01T23:59:59.000Z

374

SMB Host Processor Overhead  

NLE Websites -- All DOE Office Websites (Extended Search)

SMB SMB SMB Description There are two benchmarks included here. The msg_rate test measures the sustained MPI message rate using a communication pattern found in many real applications. For a complete explanation of the routine refer to http://www.cs.sandia.gov/smb/msgrate.html. The mpi_overhead test uses a post-work-wait method using MPI non-blocking send and receive calls to measure the user level overhead of the respective MPI calls. For a complete explanation of the routine refer to http://www.cs.sandia.gov/smb/overhead.html. Download SMB tar file How to Build The source files are in the src directory, in smb_1.0-1/src/mpi_overhead and smb_1.0-1/src/msgrate. Edit the Makefile for your environment and type 'make.' How to Run The executables run a single message at a time. The "run_script" scripts

375

Of Processors and Processing  

Science Conference Proceedings (OSTI)

Digital signal processing is a stealth technology. It is the core enabling technology in everything from your cellphone to the Mars Rover. It goes much further than just enabling a one-time breakthrough product. It provides ever-increasing capability; ...

Gene Frantz; Ray Simar

2004-03-01T23:59:59.000Z

376

Utah Natural Gas Number of Gas and Gas Condensate Wells (Number...  

Annual Energy Outlook 2012 (EIA)

Gas and Gas Condensate Wells (Number of Elements) Utah Natural Gas Number of Gas and Gas Condensate Wells (Number of Elements) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5...

377

Arizona Natural Gas Number of Gas and Gas Condensate Wells (Number...  

Annual Energy Outlook 2012 (EIA)

Gas and Gas Condensate Wells (Number of Elements) Arizona Natural Gas Number of Gas and Gas Condensate Wells (Number of Elements) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5...

378

Kansas Natural Gas Number of Gas and Gas Condensate Wells (Number...  

U.S. Energy Information Administration (EIA) Indexed Site

Gas and Gas Condensate Wells (Number of Elements) Kansas Natural Gas Number of Gas and Gas Condensate Wells (Number of Elements) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5...

379

Alaska Natural Gas Number of Gas and Gas Condensate Wells (Number...  

Annual Energy Outlook 2012 (EIA)

Gas and Gas Condensate Wells (Number of Elements) Alaska Natural Gas Number of Gas and Gas Condensate Wells (Number of Elements) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5...

380

North Dakota Natural Gas Number of Gas and Gas Condensate Wells...  

Annual Energy Outlook 2012 (EIA)

Gas and Gas Condensate Wells (Number of Elements) North Dakota Natural Gas Number of Gas and Gas Condensate Wells (Number of Elements) Decade Year-0 Year-1 Year-2 Year-3 Year-4...

Note: This page contains sample records for the topic "gas processors associa" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Montana Natural Gas Number of Gas and Gas Condensate Wells (Number...  

Annual Energy Outlook 2012 (EIA)

Gas and Gas Condensate Wells (Number of Elements) Montana Natural Gas Number of Gas and Gas Condensate Wells (Number of Elements) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5...

382

West Virginia Natural Gas Number of Gas and Gas Condensate Wells...  

Gasoline and Diesel Fuel Update (EIA)

Gas and Gas Condensate Wells (Number of Elements) West Virginia Natural Gas Number of Gas and Gas Condensate Wells (Number of Elements) Decade Year-0 Year-1 Year-2 Year-3 Year-4...

383

Wyoming Natural Gas Number of Gas and Gas Condensate Wells (Number...  

Gasoline and Diesel Fuel Update (EIA)

Gas and Gas Condensate Wells (Number of Elements) Wyoming Natural Gas Number of Gas and Gas Condensate Wells (Number of Elements) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5...

384

Indiana Natural Gas Number of Gas and Gas Condensate Wells (Number...  

Gasoline and Diesel Fuel Update (EIA)

Gas and Gas Condensate Wells (Number of Elements) Indiana Natural Gas Number of Gas and Gas Condensate Wells (Number of Elements) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5...

385

New York Natural Gas Number of Gas and Gas Condensate Wells ...  

U.S. Energy Information Administration (EIA) Indexed Site

Gas and Gas Condensate Wells (Number of Elements) New York Natural Gas Number of Gas and Gas Condensate Wells (Number of Elements) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5...

386

Nevada Natural Gas Number of Gas and Gas Condensate Wells (Number...  

Annual Energy Outlook 2012 (EIA)

Gas and Gas Condensate Wells (Number of Elements) Nevada Natural Gas Number of Gas and Gas Condensate Wells (Number of Elements) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5...

387

Oregon Natural Gas Number of Gas and Gas Condensate Wells (Number...  

Annual Energy Outlook 2012 (EIA)

Gas and Gas Condensate Wells (Number of Elements) Oregon Natural Gas Number of Gas and Gas Condensate Wells (Number of Elements) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5...

388

Alabama Natural Gas Number of Gas and Gas Condensate Wells (Number...  

U.S. Energy Information Administration (EIA) Indexed Site

Gas and Gas Condensate Wells (Number of Elements) Alabama Natural Gas Number of Gas and Gas Condensate Wells (Number of Elements) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5...

389

Ohio Natural Gas Number of Gas and Gas Condensate Wells (Number...  

Annual Energy Outlook 2012 (EIA)

Gas and Gas Condensate Wells (Number of Elements) Ohio Natural Gas Number of Gas and Gas Condensate Wells (Number of Elements) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5...

390

Carbon sequestration in natural gas reservoirs: Enhanced gas recovery and natural gas storage  

E-Print Network (OSTI)

as cushion gas for natural gas storage, Energy and Fuels,GAS RECOVERY AND NATURAL GAS STORAGE Curtis M. Oldenburgits operation as a natural gas storage reservoir. In this

Oldenburg, Curtis M.

2003-01-01T23:59:59.000Z

391

New Mexico Natural Gas Number of Gas and Gas Condensate Wells...  

U.S. Energy Information Administration (EIA) Indexed Site

Gas and Gas Condensate Wells (Number of Elements) New Mexico Natural Gas Number of Gas and Gas Condensate Wells (Number of Elements) Decade Year-0 Year-1 Year-2 Year-3 Year-4...

392

Texas Natural Gas Number of Gas and Gas Condensate Wells (Number...  

Gasoline and Diesel Fuel Update (EIA)

Gas and Gas Condensate Wells (Number of Elements) Texas Natural Gas Number of Gas and Gas Condensate Wells (Number of Elements) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5...

393

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Simulation of the system behavior of hydrate-bearing geologic media involves solving fully coupled mass and heat balance equations. The models need to simulate equilibrium or kinetic processes of hydrate formation and dissociation. TOUGH+HYDRATE is a widely used code for gas hydrate simulations. The code can model non-isothermal gas release, phase changes and flow of fluids and heat. It accounts for up to four mass components and four possible phases. Because hydrate simulations require intensive computational effort, many studies that involve serial processors are limited by problems of complexity and scale. With the growing availability of multi-core CPUs, Linux clusters, and super-computers, the use of parallel processing methods is a distinct advantage. This study develops a domain decomposition approach for large-scale gas hydrate simulations using parallel computation. The approach partitions the simulation domain into small sub-domains. The full simulation domain is simulated integrally by using multiple processes. Each process will be in charge of one portion of the simulation domain for updating thermophysical properties, assembling mass and energy balance equations, solving linear equation systems, and performing other local computations. The linear equation systems are solved in parallel by multiple processes with a parallel linear solver. The multiple processes are run in parallel on shared- or distributed memory multiple-CPU computers. A hybrid approach, running multiple processes in each CPU and using multiple CPUs, may achieve additional speedup. During calculations, communication between processes is needed to update sub-domain boundary parameters. An efficient inter-process communication scheme has been developed. The new approach was implemented into the TOUGH+HYDRATE code and demonstrates excellent speedup and very good scalability. For many large-scale problems, this method can obtain linear or super-linear speedup. This paper will show applications of the new approach to simulate three dimensional field-scale models for gas production from gas-hydrate

394

Measurements of gas permeability on crushed gas shale.  

E-Print Network (OSTI)

??In the last decade, more attention has been given to unconventional gas reservoirs, including tight gas shales. Accurate description of gas transport and permeability measurements… (more)

Guarnieri, R.V.

2012-01-01T23:59:59.000Z

395

EIA - Natural Gas Pipeline Network - Natural Gas Transmission...  

Annual Energy Outlook 2012 (EIA)

Transmission Path Diagram About U.S. Natural Gas Pipelines - Transporting Natural Gas based on data through 20072008 with selected updates Natural Gas Transmission Path Natural...

396

Montana-Dakota Utilities (Gas) - Commercial Natural Gas Efficiency...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Commercial Natural Gas Efficiency Rebate Program Montana-Dakota Utilities (Gas) - Commercial Natural Gas Efficiency Rebate Program Eligibility Commercial Savings For Other Heating...

397

Baltimore Gas and Electric Company (Gas) - Residential Energy...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

(Gas) - Residential Energy Efficiency Rebate Program Baltimore Gas and Electric Company (Gas) - Residential Energy Efficiency Rebate Program Eligibility Residential Savings For...

398

EIA - Natural Gas Pipeline Network - Generalized Natural Gas...  

Annual Energy Outlook 2012 (EIA)

Gas based on data through 20072008 with selected updates Generalized Natural Gas Pipeline Capacity Design Schematic Generalized Natural Gas Pipeline Capcity Design Schematic...

399

Natural Gas Gross Withdrawals from Gas Wells (Summary)  

U.S. Energy Information Administration (EIA) Indexed Site

Gas Wells Gross Withdrawals Gross Withdrawals From Gas Wells Gross Withdrawals From Oil Wells Gross Withdrawals From Shale Gas Wells Gross Withdrawals From Coalbed Wells...

400

EIA - Natural Gas Pipeline Network - Natural Gas Transportation...  

Gasoline and Diesel Fuel Update (EIA)

Corridors > Major U.S. Natural Gas Transportation Corridors Map About U.S. Natural Gas Pipelines - Transporting Natural Gas based on data through 20072008 with selected updates...

Note: This page contains sample records for the topic "gas processors associa" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

December Natural Gas Monthly  

Annual Energy Outlook 2012 (EIA)

DOEEIA-0130(9712) Distribution CategoryUC-950 Natural Gas Monthly December 1997 Energy Information Administration Office of Oil and Gas U.S. Department of Energy Washington, DC...

402

Natural Gas Annual, 2001  

Gasoline and Diesel Fuel Update (EIA)

1 1 EIA Home > Natural Gas > Natural Gas Data Publications Natural Gas Annual, 2001 The Natural Gas Annual, 2001 provides information on the supply and disposition of natural gas in the United States. Production, transmission, storage, deliveries, and price data are published by State for 2001. Summary data are presented for each State for 1997 to 2001. The data that appear in the tables of the Natural Gas Annual, 2001 are available as self-extracting executable files in ASCII TXT or CSV file format. This volume emphasizes information for 2001, although some tables show a five-year history. Please read the file entitled README.V1 for a description and documentation of information included in this file. Also available are files containing the following data: Summary Statistics - Natural Gas in the United States, 1997-2001 (Table 1) ASCII TXT, and Natural Gas Supply and Disposition by State, 2001 (Table 2) ASCII TXT.

403

Southern California Gas Co  

Gasoline and Diesel Fuel Update (EIA)

Southern California Gas Co ... 236,147,041 98,326,527 274,565,356 690,930 139,093,560 748,823,414 Lone Star Gas Co......

404

Natural Gas Weekly Update  

Gasoline and Diesel Fuel Update (EIA)

Btu per cubic foot as published in Table A2 of the Annual Energy Review 2001. Source: Energy Information Administration, Office of Oil and Gas. Storage: Working gas in storage...

405

Natural Gas Weekly Update  

Annual Energy Outlook 2012 (EIA)

to withdraw natural gas from storage to meet current demand. Wellhead Prices Annual Energy Review More Price Data Storage Working gas in storage decreased to 2,406 Bcf as of...

406

Natural Gas Weekly Update  

Annual Energy Outlook 2012 (EIA)

natural gas futures also reversed gains made in the previous week. Wellhead Prices Annual Energy Review More Price Data Storage Working natural gas in storage increased by 63 Bcf...

407

Natural Gas Weekly Update  

Annual Energy Outlook 2012 (EIA)

Working gas in storage was 3,121 Bcf as of Friday, Oct 24, 2003, according to the Energy Information Administration (EIA) Weekly Natural Gas Storage Report. This is 2.7...

408

Recirculating rotary gas compressor  

DOE Patents (OSTI)

A positive displacement, recirculating Roots-type rotary gas compressor is described which operates on the basis of flow work compression. The compressor includes a pair of large diameter recirculation conduits which return compressed discharge gas to the compressor housing, where it is mixed with low pressure inlet gas, thereby minimizing adiabatic heating of the gas. The compressor includes a pair of involutely lobed impellers and an associated port configuration which together result in uninterrupted flow of recirculation gas. The large diameter recirculation conduits equalize gas flow velocities within the compressor and minimize gas flow losses. The compressor is particularly suited to applications requiring sustained operation at higher gas compression ratios than have previously been feasible with rotary pumps, and is particularly applicable to refrigeration or other applications requiring condensation of a vapor. 12 figs.

Weinbrecht, J.F.

1992-02-25T23:59:59.000Z

409

Recirculating rotary gas compressor  

DOE Patents (OSTI)

A positive displacement, recirculating Roots-type rotary gas compressor which operates on the basis of flow work compression. The compressor includes a pair of large diameter recirculation conduits (24 and 26) which return compressed discharge gas to the compressor housing (14), where it is mixed with low pressure inlet gas, thereby minimizing adiabatic heating of the gas. The compressor includes a pair of involutely lobed impellers (10 and 12) and an associated port configuration which together result in uninterrupted flow of recirculation gas. The large diameter recirculation conduits equalize gas flow velocities within the compressor and minimize gas flow losses. The compressor is particularly suited to applications requiring sustained operation at higher gas compression ratios than have previously been feasible with rotary pumps, and is particularly applicable to refrigeration or other applications requiring condensation of a vapor.

Weinbrecht, John F. (601 Oakwood Loop, NE., Albuquerque, NM 87123)

1992-01-01T23:59:59.000Z

410

,"Kentucky Natural Gas Summary"  

U.S. Energy Information Administration (EIA) Indexed Site

Gas New Reservoir Discoveries in Old Fields (Billion Cubic Feet)","Kentucky Dry Natural Gas Reserves Estimated Production (Billion Cubic Feet)" 28306,451,1,35,17,,,10,3,0,48...

411

,"Oklahoma Natural Gas Summary"  

U.S. Energy Information Administration (EIA) Indexed Site

Gas New Reservoir Discoveries in Old Fields (Billion Cubic Feet)","Oklahoma Dry Natural Gas Reserves Estimated Production (Billion Cubic Feet)" 28306,13889,36,837,1016,,,1129,181,...

412

,"Florida Natural Gas Summary"  

U.S. Energy Information Administration (EIA) Indexed Site

Gas New Reservoir Discoveries in Old Fields (Billion Cubic Feet)","Florida Dry Natural Gas Reserves Estimated Production (Billion Cubic Feet)" 28306,151,-1,1,6,,,0,0,0,36...

413

,"Wyoming Natural Gas Summary"  

U.S. Energy Information Administration (EIA) Indexed Site

Gas New Reservoir Discoveries in Old Fields (Billion Cubic Feet)","Wyoming Dry Natural Gas Reserves Estimated Production (Billion Cubic Feet)" 28306,6305,-3,226,165,,,884,391,10,...

414

,"Ohio Natural Gas Summary"  

U.S. Energy Information Administration (EIA) Indexed Site

Gas New Reservoir Discoveries in Old Fields (Billion Cubic Feet)","Ohio Dry Natural Gas Reserves Estimated Production (Billion Cubic Feet)" 28306,495,-3,48,11,,,113,0,31,60...

415

,"Kansas Natural Gas Summary"  

U.S. Energy Information Administration (EIA) Indexed Site

Gas New Reservoir Discoveries in Old Fields (Billion Cubic Feet)","Kansas Dry Natural Gas Reserves Estimated Production (Billion Cubic Feet)" 28306,11457,-3,122,171,,,219,21,7,7...

416

,"Utah Natural Gas Summary"  

U.S. Energy Information Administration (EIA) Indexed Site

Gas New Reservoir Discoveries in Old Fields (Billion Cubic Feet)","Utah Dry Natural Gas Reserves Estimated Production (Billion Cubic Feet)" 28306,877,0,37,79,,,93,32,2,62...

417

Oil & Natural Gas Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

Res., 104(B10), 22985-23003. Collett, T.S. (1992), Potential of gas hydrates outlined, Oil Gas J., 90(25), 84-87. 70 Cook, A.E., Goldberg, D., and R.L. Kleinberg (2008),...

418

Natural gas annual 1996  

Science Conference Proceedings (OSTI)

This document provides information on the supply and disposition of natural gas to a wide audience. The 1996 data are presented in a sequence that follows natural gas from it`s production to it`s end use.

NONE

1997-09-01T23:59:59.000Z

419

Oil and Gas Exploration  

E-Print Network (OSTI)

Metals Industrial Minerals Oil and Gas Geothermal Exploration Development Mining Processing Nevada, oil and gas, and geothermal activities and accomplishments in Nevada: production statistics, exploration and development including drilling for petroleum and geothermal resources, discoveries of ore

Tingley, Joseph V.

420

Landfill Gas | Open Energy Information  

Open Energy Info (EERE)

Landfill Gas Jump to: navigation, search TODO: Add description List of Landfill Gas Incentives Retrieved from "http:en.openei.orgwindex.php?titleLandfillGas&oldid267173"...

Note: This page contains sample records for the topic "gas processors associa" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

5. Natural Gas Liquids Statistics  

U.S. Energy Information Administration (EIA)

5. Natural Gas Liquids Statistics Natural Gas Liquids Proved Reserves U.S. natural gas liquids proved reserves decreased 7 percent to 7,459 million ...

422

Transportation and Greenhouse Gas Mitigation  

E-Print Network (OSTI)

Summary of transportation greenhouse gas mitigation optionsof alternative fuels. Low greenhouse gas fuels Mixing ofreplacement. Greenhouse gas budgets for households and

Lutsey, Nicholas P.; Sperling, Dan

2008-01-01T23:59:59.000Z

423

,"North Dakota Natural Gas Summary"  

U.S. Energy Information Administration (EIA) Indexed Site

Natural Gas Wellhead Price (Dollars per Thousand Cubic Feet)","North Dakota Natural Gas Imports Price (Dollars per Thousand Cubic Feet)","North Dakota Natural Gas Exports...

424

Natural Gas Outlook  

Reports and Publications (EIA)

Presented by: Guy F. Caruso, EIA AdministratorPresented to: Ohio Oil & Gas Association ConferenceMarch 12, 2004

Information Center

2004-03-12T23:59:59.000Z

425

Gas Turbine Engines  

Science Conference Proceedings (OSTI)

...times higher than atmospheric pressure.Ref 25The gas turbine was developed generally for main propulsion and power

426

Natural Gas Weekly Update  

Annual Energy Outlook 2012 (EIA)

with active programs. More information is available at: http:www.eia.doe.govcneafelectricitypagerestructuringrestructureelect.html. Information about natural gas...

427

Oil & Natural Gas Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

... 6 Task 5: Carbon Inputs and Outputs to Gas Hydrate Systems ... 7 Task 6: Numerical Models for...

428

Natural gas annual 1994  

SciTech Connect

The Natural Gas Annual provides information on the supply and disposition of natural gas to a wide audience including industry, consumers, Federal and State agencies, and educational institutions. The 1994 data are presented in a sequence that follows natural gas (including supplemental supplies) from its production to its end use. This is followed by tables summarizing natural gas supply and disposition from 1990 to 1994 for each Census Division and each State. Annual historical data are shown at the national level.

NONE

1995-11-17T23:59:59.000Z

429

Natural gas annual 1995  

Science Conference Proceedings (OSTI)

The Natural Gas Annual provides information on the supply and disposition of natural gas to a wide audience including industry, consumers, Federal and State agencies, and educational institutions. The 1995 data are presented in a sequence that follows natural gas (including supplemental supplies) from its production to its end use. This is followed by tables summarizing natural gas supply and disposition from 1991 to 1995 for each Census Division and each State. Annual historical data are shown at the national level.

NONE

1996-11-01T23:59:59.000Z

430

Natural Gas Outlook  

Reports and Publications (EIA)

Presented to: Ohio Oil & Gas Association Conference, March 12, 2004 Presented by: Guy F. Caruso, Administrator, Energy Information Administration

Information Center

2004-03-12T23:59:59.000Z

431

Residual gas analysis device  

SciTech Connect

A system is provided for testing the hermeticity of a package, such as a microelectromechanical systems package containing a sealed gas volume, with a sampling device that has the capability to isolate the package and breach the gas seal connected to a pulse valve that can controllably transmit small volumes down to 2 nanoliters to a gas chamber for analysis using gas chromatography/mass spectroscopy diagnostics.

Thornberg, Steven M. (Peralta, NM)

2012-07-31T23:59:59.000Z

432

Valve for gas centrifuges  

DOE Patents (OSTI)

The invention is pneumatically operated valve assembly for simulatenously (1) closing gas-transfer lines connected to a gas centrifuge or the like and (2) establishing a recycle path between two on the lines so closed. The value assembly is especially designed to be compact, fast-acting, reliable, and comparatively inexpensive. It provides large reductions in capital costs for gas-centrifuge cascades.

Hahs, C.A.; Rurbage, C.H.

1982-03-17T23:59:59.000Z

433

Gas turbine engines  

SciTech Connect

A core engine or gas generator is described for use in a range of gas turbine engines. A multi-stage compressor and a single stage supersonic turbine are mounted on a single shaft. The compressor includes a number of stages of variable angle and the gas generator has an annular combustion chamber.

MacDonald, A.G.

1976-05-18T23:59:59.000Z

434

Pennsylvania's Natural Gas Future  

E-Print Network (OSTI)

sales to commercial and industrial customers ­ Natural gas, power, oil · Power generation ­ Fossil backed by a growing portfolio of assets. #12;Shale Gas Geography 5 | MARCELLUS SHALE COALITION #12;Shale Permits Price #12;Pricing Trend of Oil and Gas in the US $- $5.00 $10.00 $15.00 $20.00 $25.00 USDper

Lee, Dongwon

435

Compressed Gas Cylinder Policy  

E-Print Network (OSTI)

, storage, and usage of compressed gas cylinders. 2.0 POLICY Colorado School of Mines ("Mines" or "the, storage, and usage requirements outlined below. This policy is applicable school-wide including all, or electrical circuits. Flammable gas cylinders must be stored in the building's gas cylinder storage cage until

436

Natural gas monthly  

Science Conference Proceedings (OSTI)

Monthly highlights of activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry are presented. Feature articles for this issue are: Natural Gas Overview for Winter 1983-1984 by Karen A. Kelley; and an Analysis of Natural Gas Sales by John H. Herbert. (PSB)

Not Available

1983-11-01T23:59:59.000Z

437

American Journal of Computational Linguistics M i c r o f i c h e 6 Published by the Center for Applied Linguistics for the Associa-  

E-Print Network (OSTI)

PROBLENS: JOURNAL PRICES R I S I N G i 1 a 1 8 8 11 ~ R DP I S A SUMMER SCHOOL: REPORT OF COURSES, LECTURES 8 1 8 8 12 SUMMER SCHOOL A r STUTTGART: REPORT OF LECTURES I I I a I 14 INFORMATICS AND PHIL S VOLUME11 - NUMBER 2 DECEMBER 1974 C O N T E N T S P E R S O N A L N O T E S , I 8 , I I 8 I # I I , I I I

438

Number of Gas and Gas Condensate Wells  

Gasoline and Diesel Fuel Update (EIA)

3 3 2000 2001 2002 2003 2004 Number of Gas and Gas Condensate Wells Producing at End of Year ................................... 0 0 0 0 0 Production (million cubic feet) Gross Withdrawals From Gas Wells................................................ 0 0 0 0 0 From Oil Wells.................................................. 0 0 0 0 0 Total................................................................... 0 0 0 0 0 Repressuring ...................................................... 0 0 0 0 0 Vented and Flared.............................................. 0 0 0 0 0 Wet After Lease Separation................................ 0 0 0 0 0 Nonhydrocarbon Gases Removed ..................... 0 0 0 0 0 Marketed Production ..........................................

439

Number of Gas and Gas Condensate Wells  

Gasoline and Diesel Fuel Update (EIA)

1 1 2000 2001 2002 2003 2004 Number of Gas and Gas Condensate Wells Producing at End of Year ................................... 0 0 0 0 0 Production (million cubic feet) Gross Withdrawals From Gas Wells................................................ 0 0 0 0 0 From Oil Wells.................................................. 0 0 0 0 0 Total................................................................... 0 0 0 0 0 Repressuring ...................................................... 0 0 0 0 0 Vented and Flared.............................................. 0 0 0 0 0 Wet After Lease Separation................................ 0 0 0 0 0 Nonhydrocarbon Gases Removed ..................... 0 0 0 0 0 Marketed Production ..........................................

440

Number of Gas and Gas Condensate Wells  

Gasoline and Diesel Fuel Update (EIA)

9 9 2000 2001 2002 2003 2004 Number of Gas and Gas Condensate Wells Producing at End of Year ................................... 0 0 0 0 0 Production (million cubic feet) Gross Withdrawals From Gas Wells................................................ 0 0 0 0 0 From Oil Wells.................................................. 0 0 0 0 0 Total................................................................... 0 0 0 0 0 Repressuring ...................................................... 0 0 0 0 0 Vented and Flared.............................................. 0 0 0 0 0 Wet After Lease Separation................................ 0 0 0 0 0 Nonhydrocarbon Gases Removed ..................... 0 0 0 0 0 Marketed Production ..........................................

Note: This page contains sample records for the topic "gas processors associa" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Number of Gas and Gas Condensate Wells  

Gasoline and Diesel Fuel Update (EIA)

9 9 2000 2001 2002 2003 2004 Number of Gas and Gas Condensate Wells Producing at End of Year ................................... 0 0 0 0 0 Production (million cubic feet) Gross Withdrawals From Gas Wells................................................ 0 0 0 0 0 From Oil Wells.................................................. 0 0 0 0 0 Total................................................................... 0 0 0 0 0 Repressuring ...................................................... 0 0 0 0 0 Vented and Flared.............................................. 0 0 0 0 0 Wet After Lease Separation................................ 0 0 0 0 0 Nonhydrocarbon Gases Removed ..................... 0 0 0 0 0 Marketed Production ..........................................

442

Number of Gas and Gas Condensate Wells  

Gasoline and Diesel Fuel Update (EIA)

1 1 2000 2001 2002 2003 2004 Number of Gas and Gas Condensate Wells Producing at End of Year ................................... 0 0 0 0 0 Production (million cubic feet) Gross Withdrawals From Gas Wells................................................ 0 0 0 0 0 From Oil Wells.................................................. 7,279 6,446 3,785 3,474 3,525 Total................................................................... 7,279 6,446 3,785 3,474 3,525 Repressuring ...................................................... 0 0 0 0 0 Vented and Flared.............................................. 0 0 0 0 0 Wet After Lease Separation................................ 7,279 6,446 3,785 3,474 3,525 Nonhydrocarbon Gases Removed ..................... 788 736 431

443

Number of Gas and Gas Condensate Wells  

Gasoline and Diesel Fuel Update (EIA)

5 5 2000 2001 2002 2003 2004 Number of Gas and Gas Condensate Wells Producing at End of Year ................................... 15,206 15,357 16,957 17,387 18,120 Production (million cubic feet) Gross Withdrawals From Gas Wells................................................ 463,929 423,672 401,396 369,624 350,413 From Oil Wells.................................................. 63,222 57,773 54,736 50,403 47,784 Total................................................................... 527,151 481,445 456,132 420,027 398,197 Repressuring ...................................................... 896 818 775 714 677 Vented and Flared.............................................. 527 481 456 420 398 Wet After Lease Separation................................

444

Number of Gas and Gas Condensate Wells  

Gasoline and Diesel Fuel Update (EIA)

7 7 2000 2001 2002 2003 2004 Number of Gas and Gas Condensate Wells Producing at End of Year ................................... 9 8 7 9 6 Production (million cubic feet) Gross Withdrawals From Gas Wells................................................ 368 305 300 443 331 From Oil Wells.................................................. 1 1 0 0 0 Total................................................................... 368 307 301 443 331 Repressuring ...................................................... 0 0 0 0 0 Vented and Flared.............................................. 0 0 0 0 0 Wet After Lease Separation................................ 368 307 301 443 331 Nonhydrocarbon Gases Removed ..................... 0 0 0 0 0 Marketed Production ..........................................

445

Number of Gas and Gas Condensate Wells  

Gasoline and Diesel Fuel Update (EIA)

7 7 2000 2001 2002 2003 2004 Number of Gas and Gas Condensate Wells Producing at End of Year ................................... 98 96 106 109 111 Production (million cubic feet) Gross Withdrawals From Gas Wells................................................ 869 886 904 1,187 1,229 From Oil Wells.................................................. 349 322 288 279 269 Total................................................................... 1,218 1,208 1,193 1,466 1,499 Repressuring ...................................................... 0 0 0 0 0 Vented and Flared.............................................. 0 0 5 12 23 Wet After Lease Separation................................ 1,218 1,208 1,188 1,454 1,476 Nonhydrocarbon Gases Removed .....................

446

Number of Gas and Gas Condensate Wells  

Gasoline and Diesel Fuel Update (EIA)

9 9 2000 2001 2002 2003 2004 Number of Gas and Gas Condensate Wells Producing at End of Year ................................... 4 4 4 4 4 Production (million cubic feet) Gross Withdrawals From Gas Wells................................................ 0 0 0 0 0 From Oil Wells.................................................. 7 7 6 6 5 Total................................................................... 7 7 6 6 5 Repressuring ...................................................... 0 0 0 0 0 Vented and Flared.............................................. 0 0 0 0 0 Wet After Lease Separation................................ 7 7 6 6 5 Nonhydrocarbon Gases Removed ..................... 0 0 0 0 0 Marketed Production ..........................................

447

Number of Gas and Gas Condensate Wells  

Gasoline and Diesel Fuel Update (EIA)

3 3 2000 2001 2002 2003 2004 Number of Gas and Gas Condensate Wells Producing at End of Year ................................... 0 0 0 0 0 Production (million cubic feet) Gross Withdrawals From Gas Wells................................................ 0 0 0 0 0 From Oil Wells.................................................. 0 0 0 0 0 Total................................................................... 0 0 0 0 0 Repressuring ...................................................... 0 0 0 0 0 Vented and Flared.............................................. 0 0 0 0 0 Wet After Lease Separation................................ 0 0 0 0 0 Nonhydrocarbon Gases Removed ..................... 0 0 0 0 0 Marketed Production ..........................................

448

Number of Gas and Gas Condensate Wells  

Gasoline and Diesel Fuel Update (EIA)

5 5 2000 2001 2002 2003 2004 Number of Gas and Gas Condensate Wells Producing at End of Year ................................... 0 0 0 0 0 Production (million cubic feet) Gross Withdrawals From Gas Wells................................................ 0 0 0 0 0 From Oil Wells.................................................. 0 0 0 0 0 Total................................................................... 0 0 0 0 0 Repressuring ...................................................... 0 0 0 0 0 Vented and Flared.............................................. 0 0 0 0 0 Wet After Lease Separation................................ 0 0 0 0 0 Nonhydrocarbon Gases Removed ..................... 0 0 0 0 0 Marketed Production ..........................................

449

Number of Gas and Gas Condensate Wells  

Gasoline and Diesel Fuel Update (EIA)

3 3 2000 2001 2002 2003 2004 Number of Gas and Gas Condensate Wells Producing at End of Year ................................... 0 0 0 0 0 Production (million cubic feet) Gross Withdrawals From Gas Wells................................................ 0 0 0 0 0 From Oil Wells.................................................. 0 0 0 0 0 Total................................................................... 0 0 0 0 0 Repressuring ...................................................... 0 0 0 0 0 Vented and Flared.............................................. 0 0 0 0 0 Wet After Lease Separation................................ 0 0 0 0 0 Nonhydrocarbon Gases Removed ..................... 0 0 0 0 0 Marketed Production ..........................................

450

Number of Gas and Gas Condensate Wells  

Gasoline and Diesel Fuel Update (EIA)

3 3 2000 2001 2002 2003 2004 Number of Gas and Gas Condensate Wells Producing at End of Year ................................... 0 0 0 0 0 Production (million cubic feet) Gross Withdrawals From Gas Wells................................................ 0 0 0 0 0 From Oil Wells.................................................. 0 0 0 0 0 Total................................................................... 0 0 0 0 0 Repressuring ...................................................... 0 0 0 0 0 Vented and Flared.............................................. 0 0 0 0 0 Wet After Lease Separation................................ 0 0 0 0 0 Nonhydrocarbon Gases Removed ..................... 0 0 0 0 0 Marketed Production ..........................................

451

Number of Gas and Gas Condensate Wells  

Gasoline and Diesel Fuel Update (EIA)

3 3 2000 2001 2002 2003 2004 Number of Gas and Gas Condensate Wells Producing at End of Year ................................... 0 0 0 0 0 Production (million cubic feet) Gross Withdrawals From Gas Wells................................................ 0 0 0 0 0 From Oil Wells.................................................. 0 0 0 0 0 Total................................................................... 0 0 0 0 0 Repressuring ...................................................... 0 0 0 0 0 Vented and Flared.............................................. 0 0 0 0 0 Wet After Lease Separation................................ 0 0 0 0 0 Nonhydrocarbon Gases Removed ..................... 0 0 0 0 0 Marketed Production ..........................................

452

Number of Gas and Gas Condensate Wells  

Gasoline and Diesel Fuel Update (EIA)

1 1 2000 2001 2002 2003 2004 Number of Gas and Gas Condensate Wells Producing at End of Year ................................... 0 0 0 0 0 Production (million cubic feet) Gross Withdrawals From Gas Wells................................................ 0 0 0 0 0 From Oil Wells.................................................. 0 0 0 0 0 Total................................................................... 0 0 0 0 0 Repressuring ...................................................... 0 0 0 0 0 Vented and Flared.............................................. 0 0 0 0 0 Wet After Lease Separation................................ 0 0 0 0 0 Nonhydrocarbon Gases Removed ..................... 0 0 0 0 0 Marketed Production ..........................................

453

Number of Gas and Gas Condensate Wells  

Gasoline and Diesel Fuel Update (EIA)

7 7 2000 2001 2002 2003 2004 Number of Gas and Gas Condensate Wells Producing at End of Year ................................... 380 350 400 430 280 Production (million cubic feet) Gross Withdrawals From Gas Wells................................................ 0 0 0 0 0 From Oil Wells.................................................. 1,150 2,000 2,050 1,803 2,100 Total................................................................... 1,150 2,000 2,050 1,803 2,100 Repressuring ...................................................... NA NA NA 0 NA Vented and Flared.............................................. NA NA NA 0 NA Wet After Lease Separation................................ 1,150 2,000 2,050 1,803 2,100 Nonhydrocarbon Gases Removed .....................

454

Number of Gas and Gas Condensate Wells  

Gasoline and Diesel Fuel Update (EIA)

5 5 2000 2001 2002 2003 2004 Number of Gas and Gas Condensate Wells Producing at End of Year ................................... 0 0 0 0 0 Production (million cubic feet) Gross Withdrawals From Gas Wells................................................ 0 0 0 0 0 From Oil Wells.................................................. 0 0 0 0 0 Total................................................................... 0 0 0 0 0 Repressuring ...................................................... 0 0 0 0 0 Vented and Flared.............................................. 0 0 0 0 0 Wet After Lease Separation................................ 0 0 0 0 0 Nonhydrocarbon Gases Removed ..................... 0 0 0 0 0 Marketed Production ..........................................

455

Number of Gas and Gas Condensate Wells  

Gasoline and Diesel Fuel Update (EIA)

1 1 2000 2001 2002 2003 2004 Number of Gas and Gas Condensate Wells Producing at End of Year ................................... 1,502 1,533 1,545 2,291 2,386 Production (million cubic feet) Gross Withdrawals From Gas Wells................................................ 899 1,064 1,309 1,464 3,401 From Oil Wells.................................................. 0 0 0 0 0 Total................................................................... 899 1,064 1,309 1,464 3,401 Repressuring ...................................................... NA NA NA 0 NA Vented and Flared.............................................. NA NA NA 0 NA Wet After Lease Separation................................ 899 1,064 1,309 1,464 3,401 Nonhydrocarbon Gases Removed .....................

456

Number of Gas and Gas Condensate Wells  

Gasoline and Diesel Fuel Update (EIA)

9 9 2000 2001 2002 2003 2004 Number of Gas and Gas Condensate Wells Producing at End of Year ................................... 0 0 0 0 0 Production (million cubic feet) Gross Withdrawals From Gas Wells................................................ 0 0 0 0 0 From Oil Wells.................................................. 0 0 0 0 0 Total................................................................... 0 0 0 0 0 Repressuring ...................................................... 0 0 0 0 0 Vented and Flared.............................................. 0 0 0 0 0 Wet After Lease Separation................................ 0 0 0 0 0 Nonhydrocarbon Gases Removed ..................... 0 0 0 0 0 Marketed Production ..........................................

457

Number of Gas and Gas Condensate Wells  

Gasoline and Diesel Fuel Update (EIA)

3 3 2000 2001 2002 2003 2004 Number of Gas and Gas Condensate Wells Producing at End of Year ................................... 0 0 0 0 0 Production (million cubic feet) Gross Withdrawals From Gas Wells................................................ 0 0 0 0 0 From Oil Wells.................................................. 0 0 0 0 0 Total................................................................... 0 0 0 0 0 Repressuring ...................................................... 0 0 0 0 0 Vented and Flared.............................................. 0 0 0 0 0 Wet After Lease Separation................................ 0 0 0 0 0 Nonhydrocarbon Gases Removed ..................... 0 0 0 0 0 Marketed Production ..........................................

458

Number of Gas and Gas Condensate Wells  

Gasoline and Diesel Fuel Update (EIA)

7 7 2000 2001 2002 2003 2004 Number of Gas and Gas Condensate Wells Producing at End of Year ................................... 0 0 0 0 0 Production (million cubic feet) Gross Withdrawals From Gas Wells................................................ 0 0 0 0 0 From Oil Wells.................................................. 0 0 0 0 0 Total................................................................... 0 0 0 0 0 Repressuring ...................................................... 0 0 0 0 0 Vented and Flared.............................................. 0 0 0 0 0 Wet After Lease Separation................................ 0 0 0 0 0 Nonhydrocarbon Gases Removed ..................... 0 0 0 0 0 Marketed Production ..........................................

459

Number of Gas and Gas Condensate Wells  

Gasoline and Diesel Fuel Update (EIA)

3 3 2000 2001 2002 2003 2004 Number of Gas and Gas Condensate Wells Producing at End of Year ................................... 7 7 5 7 7 Production (million cubic feet) Gross Withdrawals From Gas Wells................................................ 34 32 22 48 34 From Oil Wells.................................................. 0 0 0 0 0 Total................................................................... 34 32 22 48 34 Repressuring ...................................................... 0 0 0 0 0 Vented and Flared.............................................. 0 0 0 0 0 Wet After Lease Separation................................ 34 32 22 48 34 Nonhydrocarbon Gases Removed ..................... 0 0 0 0 0 Marketed Production ..........................................

460

Number of Gas and Gas Condensate Wells  

Gasoline and Diesel Fuel Update (EIA)

1 1 2000 2001 2002 2003 2004 Number of Gas and Gas Condensate Wells Producing at End of Year ................................... 0 0 0 0 0 Production (million cubic feet) Gross Withdrawals From Gas Wells................................................ 0 0 0 0 0 From Oil Wells.................................................. 0 0 0 0 0 Total................................................................... 0 0 0 0 0 Repressuring ...................................................... 0 0 0 0 0 Vented and Flared.............................................. 0 0 0 0 0 Wet After Lease Separation................................ 0 0 0 0 0 Nonhydrocarbon Gases Removed ..................... 0 0 0 0 0 Marketed Production ..........................................

Note: This page contains sample records for the topic "gas processors associa" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Number of Gas and Gas Condensate Wells  

Gasoline and Diesel Fuel Update (EIA)

1 1 2000 2001 2002 2003 2004 Number of Gas and Gas Condensate Wells Producing at End of Year ......................................... 0 0 0 0 0 Production (million cubic feet) Gross Withdrawals From Gas Wells...................................................... 0 0 0 0 0 From Oil Wells........................................................ 0 0 0 0 0 Total......................................................................... 0 0 0 0 0 Repressuring ............................................................ 0 0 0 0 0 Vented and Flared .................................................... 0 0 0 0 0 Wet After Lease Separation...................................... 0 0 0 0 0 Nonhydrocarbon Gases Removed............................ 0 0 0 0 0 Marketed Production

462

Number of Gas and Gas Condensate Wells  

Gasoline and Diesel Fuel Update (EIA)

7 7 2000 2001 2002 2003 2004 Number of Gas and Gas Condensate Wells Producing at End of Year ................................... 0 0 0 0 0 Production (million cubic feet) Gross Withdrawals From Gas Wells................................................ 0 0 0 0 0 From Oil Wells.................................................. 0 0 0 0 0 Total................................................................... 0 0 0 0 0 Repressuring ...................................................... 0 0 0 0 0 Vented and Flared.............................................. 0 0 0 0 0 Wet After Lease Separation................................ 0 0 0 0 0 Nonhydrocarbon Gases Removed ..................... 0 0 0 0 0 Marketed Production ..........................................

463

Number of Gas and Gas Condensate Wells  

Gasoline and Diesel Fuel Update (EIA)

7 7 2000 2001 2002 2003 2004 Number of Gas and Gas Condensate Wells Producing at End of Year ................................... 17 20 18 15 15 Production (million cubic feet) Gross Withdrawals From Gas Wells................................................ 1,412 1,112 837 731 467 From Oil Wells.................................................. 0 0 0 0 0 Total................................................................... 1,412 1,112 837 731 467 Repressuring ...................................................... 0 0 0 0 0 Vented and Flared.............................................. 0 0 0 0 0 Wet After Lease Separation................................ 1,412 1,112 837 731 467 Nonhydrocarbon Gases Removed ..................... 198 3 0 0 0 Marketed Production

464

Number of Gas and Gas Condensate Wells  

Gasoline and Diesel Fuel Update (EIA)

7 7 2000 2001 2002 2003 2004 Number of Gas and Gas Condensate Wells Producing at End of Year ................................... 0 0 0 0 0 Production (million cubic feet) Gross Withdrawals From Gas Wells................................................ 0 0 0 0 0 From Oil Wells.................................................. 0 0 0 0 0 Total................................................................... 0 0 0 0 0 Repressuring ...................................................... 0 0 0 0 0 Vented and Flared.............................................. 0 0 0 0 0 Wet After Lease Separation................................ 0 0 0 0 0 Nonhydrocarbon Gases Removed ..................... 0 0 0 0 0 Marketed Production ..........................................

465

ComEd, Nicor Gas, Peoples Gas & North Shore Gas - Bonus Rebate...  

Open Energy Info (EERE)

Rebates Central Air Conditioner Unit 14 SEER or above: 350 Central Air Conditioner Unit Energy Star rated: 500 Nicor Gas, Peoples Gas & North Shore Gas Furnace: 200 - 500...

466

Experimental Study of Main Gas Ingestion and Purge Gas Egress Flow in Model Gas Turbine Stages.  

E-Print Network (OSTI)

??Efficient performance of gas turbines depends, among several parameters, on the mainstream gas entry temperature. At the same time, transport of this high temperature gas… (more)

Balasubramanian, Jagdish Harihara

2010-01-01T23:59:59.000Z

467

EIA - Natural Gas Pipeline Network - Natural Gas Supply Basins ...  

U.S. Energy Information Administration (EIA)

About U.S. Natural Gas Pipelines - Transporting Natural Gas based on data through 2007/2008 with selected updates

468

Natural Gas Industrial Price  

Gasoline and Diesel Fuel Update (EIA)

Citygate Price Residential Price Commercial Price Industrial Price Electric Power Price Gross Withdrawals Gross Withdrawals From Gas Wells Gross Withdrawals From Oil Wells Gross Withdrawals From Shale Gas Wells Gross Withdrawals From Coalbed Wells Repressuring Nonhydrocarbon Gases Removed Vented and Flared Marketed Production NGPL Production, Gaseous Equivalent Dry Production Imports By Pipeline LNG Imports Exports Exports By Pipeline LNG Exports Underground Storage Capacity Gas in Underground Storage Base Gas in Underground Storage Working Gas in Underground Storage Underground Storage Injections Underground Storage Withdrawals Underground Storage Net Withdrawals Total Consumption Lease and Plant Fuel Consumption Pipeline & Distribution Use Delivered to Consumers Residential Commercial Industrial Vehicle Fuel Electric Power Period: Monthly Annual

469

NUCLEAR GAS ENGINE  

SciTech Connect

A preliminary design study of the nuclear gas engine, consisting of a gas-cooled reactor directly coupled to a reciprocating engine, is presented. The principles of operation of the proposed gas engine are outlined and typical variations anre discussed. The nuclear gas engine is compared with other reciprocating engines and air compressors. A comparison between the ideal and actual cycles is made, with particular attention given to pumping, heat, and other losses to be expected. The applications and development of the nuclear gas engine are discussed. (W.D.M.)

Fraas, A.P.

1958-09-25T23:59:59.000Z

470

Southwest Gas Corporation - Southwest Gas Corporation - Residential...  

Open Energy Info (EERE)

Insulation: 0.15sq ft Floor Insulation: 0.30sq ft Builders Energy Star Certified Home: 450 Natural Gas Tankless Water Heater: 450 Attic Insulation: 0.15sq ft Equipment...

471

Natural Gas Annual 2006  

Gasoline and Diesel Fuel Update (EIA)

6 6 Released: October 31, 2007 The Natural Gas Annual 2006 Summary Highlights provides an overview of the supply and disposition of natural gas in 2006 and is intended as a supplement to the Natural Gas Annual 2006. The Natural Gas Annual 2006 Summary Highlights provides an overview of the supply and disposition of natural gas in 2006 and is intended as a supplement to the Natural Gas Annual 2006. Natural Gas Annual --- Full report in PDF (5 MB) Special Files --- All CSV files contained in a self-extracting executable file. Respondent/Company Level Natural Gas Data Files Annual Natural and Supplemental Gas Supply and Disposition Company level data (1996 to 2007) as reported on Form EIA-176 are provided in the EIA-176 Query System and selected data files. EIA-191A Field Level Underground Natural Gas Storage Data: Detailed annual data (2006 and 2007) of storage field capacity, field type, and maximum deliverability as of December 31st of the report year, as reported by operators of all U.S. underground natural gas storage fields.

472

Natural-gas liquids  

SciTech Connect

Casinghead gasoline or natural gasoline, now more suitably known as natural-gas liquids (NGL), was a nuisance when first found, but was developed into a major and profitable commodity. This part of the petroleum industry began at about the turn of the century, and more than 60 yr later the petroleum industry recovers approx. one million bbl of natural-gas liquids a day from 30 billion cu ft of natural gas processed in more than 600 gasoline plants. Although casinghead gasoline first was used for automobile fuel, natural-gas liquids now are used for fuel, industrial solvents, aviation blending stock, synthetic rubber, and many other petrochemical uses. Production from the individual plants is shipped by tank car, tank truck, pipeline, and tankers all over the world. Most of the natural-gas liquids come from wet natural gas which contains a considerable quantity of vapor, ranging from 0.5 to 6 gal/Mcf, and some particularly rich gases contain even more which can be liquefied. Nonassociated gas is generally clean, with a comparatively small quantity of gasoline, 0.1 to 0.5 gas/Mcf. The natural-gas liquids branch of the industry is build around the condensation of vapors in natural gas. Natural-gas liquids are processed either by the compression method or by adsorption processes.

Blackstock, W.B.; McCullough, G.W.; McCutchan, R.C.

1968-01-01T23:59:59.000Z

473

Natural gas sdtrategic plan  

SciTech Connect

The US Department of Energy`s natural gas program is aimed at meeting simultaneously our national energy needs, reducing oil imports, protecting our environment, and improving our economy The Natural Gas Strategic Plan for 1995 represents a Department-wide effort to articulate the key issues related to the expanded development and utilization of natural gas, and defines the roles of the federal government and US industry in partnering to accomplish the strategic goals defined. The four overarching goals of the Natural Gas Strategic Plan are to: foster the development of advanced natural gas technologies; encourage the adoption of advanced natural gas technologies in new and existing markets; support the removal of policy impediments to natural gas use in new and existing markets; and foster technologies and policies to maximize the environmental benefits of natural gas use. DOE`s proposed fiscal year (FY) 1996 budget represents a commitment to natural gas research, development, and demonstration (RD&D) from reservoir to end use. DOE has redirected and increased funding for its natural gas exploration, production, delivery and storage, processing, and utilization RD&D programs, shifting funds from other energy programs to programs that will enhance efficiency and advance the role of natural gas in our domestic energy resources portfolio.

1995-06-01T23:59:59.000Z

474

Gas Hydrate Storage of Natural Gas  

Science Conference Proceedings (OSTI)

Environmental and economic benefits could accrue from a safe, above-ground, natural-gas storage process allowing electric power plants to utilize natural gas for peak load demands; numerous other applications of a gas storage process exist. A laboratory study conducted in 1999 to determine the feasibility of a gas-hydrates storage process looked promising. The subsequent scale-up of the process was designed to preserve important features of the laboratory apparatus: (1) symmetry of hydrate accumulation, (2) favorable surface area to volume ratio, (3) heat exchanger surfaces serving as hydrate adsorption surfaces, (4) refrigeration system to remove heat liberated from bulk hydrate formation, (5) rapid hydrate formation in a non-stirred system, (6) hydrate self-packing, and (7) heat-exchanger/adsorption plates serving dual purposes to add or extract energy for hydrate formation or decomposition. The hydrate formation/storage/decomposition Proof-of-Concept (POC) pressure vessel and supporting equipment were designed, constructed, and tested. This final report details the design of the scaled POC gas-hydrate storage process, some comments on its fabrication and installation, checkout of the equipment, procedures for conducting the experimental tests, and the test results. The design, construction, and installation of the equipment were on budget target, as was the tests that were subsequently conducted. The budget proposed was met. The primary goal of storing 5000-scf of natural gas in the gas hydrates was exceeded in the final test, as 5289-scf of gas storage was achieved in 54.33 hours. After this 54.33-hour period, as pressure in the formation vessel declined, additional gas went into the hydrates until equilibrium pressure/temperature was reached, so that ultimately more than the 5289-scf storage was achieved. The time required to store the 5000-scf (48.1 hours of operating time) was longer than designed. The lower gas hydrate formation rate is attributed to a lower heat transfer rate in the internal heat exchanger than was designed. It is believed that the fins on the heat-exchanger tubes did not make proper contact with the tubes transporting the chilled glycol, and pairs of fins were too close for interior areas of fins to serve as hydrate collection sites. A correction of the fabrication fault in the heat exchanger fin attachments could be easily made to provide faster formation rates. The storage success with the POC process provides valuable information for making the process an economically viable process for safe, aboveground natural-gas storage.

Rudy Rogers; John Etheridge

2006-03-31T23:59:59.000Z

475

Natural Gas Annual, 2004  

Gasoline and Diesel Fuel Update (EIA)

4 4 EIA Home > Natural Gas > Natural Gas Data Publications Natural Gas Annual, 2004 Natural Gas Annual 2004 Release date: December 19, 2005 Next release date: January 2007 The Natural Gas Annual, 2004 provides information on the supply and disposition of natural gas in the United States. Production, transmission, storage, deliveries, and price data are published by State for 2004. Summary data are presented for each State for 2000 to 2004. The data that appear in the tables of the Natural Gas Annual, 2004 is available as self-extracting executable file or CSV file format. This volume emphasizes information for 2004, although some tables show a five-year history. Please read the file entitled README.V1 for a description and documentation of information included in this file.

476

Natural gas leak mapper  

DOE Patents (OSTI)

A system is described that is suitable for use in determining the location of leaks of gases having a background concentration. The system is a point-wise backscatter absorption gas measurement system that measures absorption and distance to each point of an image. The absorption measurement provides an indication of the total amount of a gas of interest, and the distance provides an estimate of the background concentration of gas. The distance is measured from the time-of-flight of laser pulse that is generated along with the absorption measurement light. The measurements are formated into an image of the presence of gas in excess of the background. Alternatively, an image of the scene is superimosed on the image of the gas to aid in locating leaks. By further modeling excess gas as a plume having a known concentration profile, the present system provides an estimate of the maximum concentration of the gas of interest.

Reichardt, Thomas A. (Livermore, CA); Luong, Amy Khai (Dublin, CA); Kulp, Thomas J. (Livermore, CA); Devdas, Sanjay (Albany, CA)

2008-05-20T23:59:59.000Z

477

NETL: Oil & Natural Gas Projects  

NLE Websites -- All DOE Office Websites (Extended Search)

of Texas-Austin, Austin, TX Background A significant portion of U.S. natural gas production comes from unconventional gas resources such as tight gas sands. Tight gas sands...

478

Gas Pipelines:- long, thin, bombs?  

Science Conference Proceedings (OSTI)

... Gas Pipelines:- long, thin, bombs? Gas pipelines attract substantial reseach to improve safety and cut costs. They operate ...

479

Natural Gas 1995: Preliminary Highlights  

U.S. Energy Information Administration (EIA)

Energy Information Administration / Natural Gas Monthly April 1996 1. ... Widespread economic growth ... Growth in electric utility gas con-

480

ComEd, Nicor Gas, Peoples Gas and North Shore Gas - Bonus Rebate Program  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ComEd, Nicor Gas, Peoples Gas and North Shore Gas - Bonus Rebate ComEd, Nicor Gas, Peoples Gas and North Shore Gas - Bonus Rebate Program (Illinois) ComEd, Nicor Gas, Peoples Gas and North Shore Gas - Bonus Rebate Program (Illinois) < Back Eligibility Residential Savings Category Heating & Cooling Commercial Heating & Cooling Cooling Heating Maximum Rebate $1,000 Program Info Start Date 01/01/2013 Expiration Date 04/30/2013 State Illinois Program Type Utility Rebate Program Rebate Amount ComEd Rebates Central Air Conditioner Unit 14 SEER or above: $350 Central Air Conditioner Unit Energy Star rated: $500 Nicor Gas, Peoples Gas and North Shore Gas Furnace: $200 - $500 (varies based on gas company and unit installed) Provider ComEd Energy ComEd, Nicor Gas, Peoples Gas and North Shore Gas are offering a Complete System Replacement Rebate Program to residential customers. The program is

Note: This page contains sample records for the topic "gas processors associa" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

U.S. Natural Gas Supplemental Gas - Biomass Gas (Million Cubic...  

Gasoline and Diesel Fuel Update (EIA)

Biomass Gas (Million Cubic Feet) U.S. Natural Gas Supplemental Gas - Biomass Gas (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9...

482

Natural Gas Annual 2008  

Gasoline and Diesel Fuel Update (EIA)

8 8 Released: March 2, 2010 The Natural Gas Annual 2008 provides information on the supply and disposition of natural gas in the United States. Production, transmission, storage, deliveries, and price data are published by State for 2008. Summary data are presented for each State for 2004 to 2008. The Natural Gas Annual 2008 Summary Highlights provides an overview of the supply and disposition of natural gas in 2008 and is intended as a supplement to the Natural Gas Annual 2008. Natural Gas Annual --- Full report in PDF (5 MB) Special Files --- All CSV files contained in a self-extracting executable file. Respondent/Company Level Natural Gas Data Files Annual Natural and Supplemental Gas Supply and Disposition Company level data (1996 to 2008) as reported on Form EIA-176 are provided in the EIA-176 Query System and selected data files. EIA-191A Field Level Underground Natural Gas Storage Data: Detailed annual data (2005 to 2008) of storage field capacity, field type, and maximum deliverability as of December 31st of the report year, as reported by operators of all U.S. underground natural gas storage fields.

483

Natural Gas Annual 2007  

Gasoline and Diesel Fuel Update (EIA)

7 7 Released: January 28, 2009 The Natural Gas Annual 2007 provides information on the supply and disposition of natural gas in the United States. Production, transmission, storage, deliveries, and price data are published by State for 2007. Summary data are presented for each State for 2003 to 2007. The Natural Gas Annual 2007 Summary Highlights provides an overview of the supply and disposition of natural gas in 2007 and is intended as a supplement to the Natural Gas Annual 2007. Natural Gas Annual --- Full report in PDF (5 MB) Special Files --- All CSV files contained in a self-extracting executable file. Respondent/Company Level Natural Gas Data Files Annual Natural and Supplemental Gas Supply and Disposition Company level data (1996 to 2007) as reported on Form EIA-176 are provided in the EIA-176 Query System and selected data files. EIA-191A Field Level Underground Natural Gas Storage Data: Detailed annual data (2005 to 2007) of storage field capacity, field type, and maximum deliverability as of December 31st of the report year, as reported by operators of all U.S. underground natural gas storage fields.

484

Natural Gas Annual, 2003  

Gasoline and Diesel Fuel Update (EIA)

3 3 EIA Home > Natural Gas > Natural Gas Data Publications Natural Gas Annual, 2003 Natural Gas Annual 2003 Release date: December 22, 2004 Next release date: January 2006 The Natural Gas Annual, 2003 provides information on the supply and disposition of natural gas in the United States. Production, transmission, storage, deliveries, and price data are published by State for 2003. Summary data are presented for each State for 1999 to 2003. “The Natural Gas Industry and Markets in 2003” is a special report that provides an overview of the supply and disposition of natural gas in 2003 and is intended as a supplement to the Natural Gas Annual 2003. The data that appear in the tables of the Natural Gas Annual, 2003 is available as self-extracting executable file or CSV file format. This volume emphasizes information for 2003, although some tables show a five-year history. Please read the file entitled README.V1 for a description and documentation of information included in this file.

485

Natural Gas Annual, 2002  

Gasoline and Diesel Fuel Update (EIA)

2 2 EIA Home > Natural Gas > Natural Gas Data Publications Natural Gas Annual, 2002 Natural Gas Annual 2002 Release date: January 29, 2004 Next release date: January 2005 The Natural Gas Annual, 2002 provides information on the supply and disposition of natural gas in the United States. Production, transmission, storage, deliveries, and price data are published by State for 2002. Summary data are presented for each State for 1998 to 2002. “The Natural Gas Industry and Markets in 2002” is a special report that provides an overview of the supply and disposition of natural gas in 2002 and is intended as a supplement to the Natural Gas Annual 2002. Changes to data sources for this Natural Gas Annual, as a result of ongoing data quality efforts, have resulted in revisions to several data series. Production volumes have been revised for the Federal offshore and several States. Several data series based on the Form EIA-176, including deliveries to end-users in several States, were also revised. Additionally, revisions have been made to include updates to the electric power and vehicle fuel end-use sectors.

486

Natural Gas Annual 2009  

Gasoline and Diesel Fuel Update (EIA)

9 9 Released: December 28, 2010 The Natural Gas Annual 2009 provides information on the supply and disposition of natural gas in the United States. Production, transmission, storage, deliveries, and price data are published by State for 2009. Summary data are presented for each State for 2005 to 2009. The Natural Gas Annual 2009 Summary Highlights provides an overview of the supply and disposition of natural gas in 2009 and is intended as a supplement to the Natural Gas Annual 2009. Natural Gas Annual --- Full report in PDF (5 MB) Special Files --- All CSV files contained in a self-extracting executable file. Respondent/Company Level Natural Gas Data Files Annual Natural and Supplemental Gas Supply and Disposition Company level data (1996 to 2009) as reported on Form EIA-176 are provided in the EIA-176 Query System and selected data files. EIA-191A Field Level Underground Natural Gas Storage Data: Detailed annual data (2005 to 2009) of storage field capacity, field type, and maximum deliverability as of December 31st of the report year, as reported by operators of all U.S. underground natural gas storage fields.

487

Flue gas desulfurization  

DOE Patents (OSTI)

The invention involves a combustion process in which combustion gas containing sulfur oxide is directed past a series of heat exchangers to a stack and in which a sodium compound is added to the combustion gas in a temparature zone of above about 1400 K to form Na/sub 2/SO/sub 4/. Preferably, the temperature is above about 1800 K and the sodium compound is present as a vapor to provide a gas-gas reaction to form Na/sub 2/SO/sub 4/ as a liquid. Since liquid Na/sub 2/SO/sub 4/ may cause fouling of heat exchanger surfaces downstream from the combustion zone, the process advantageously includes the step of injecting a cooling gas downstream of the injection of the sodium compound yet upstream of one or more heat exchangers to cool the combustion gas to below about 1150 K and form solid Na/sub 2/SO/sub 4/. The cooling gas is preferably a portion of the combustion gas downstream which may be recycled for cooling. It is further advantageous to utilize an electrostatic precipitator downstream of the heat exchangers to recover the Na/sub 2/SO/sub 4/. It is also advantageous in the process to remove a portion of the combustion gas cleaned in the electrostatic precipitator and recycle that portion upstream to use as the cooling gas. 3 figures.

Im, K.H.; Ahluwalia, R.K.

1984-05-01T23:59:59.000Z

488

Carbon sequestration in natural gas reservoirs: Enhanced gas recovery and natural gas storage  

E-Print Network (OSTI)

gas reservoirs for carbon sequestration and enhanced gasproduction and carbon sequestration, Society of Petroleumfeasibiilty of carbon sequestration with enhanced gas

Oldenburg, Curtis M.

2003-01-01T23:59:59.000Z

489

Natural Gas Weekly Update  

Gasoline and Diesel Fuel Update (EIA)

2, 2011 at 2:00 P.M. 2, 2011 at 2:00 P.M. Next Release: Thursday, May 19, 2011 Overview Prices Storage Other Market Trends Natural Gas Transportation Update Overview (For the Week Ending Wednesday, May 11, 2011) Natural gas prices fell across the board as oil prices dropped steeply along with most other major commodities. At the Henry Hub, the natural gas spot price fell 36 cents from $4.59 per million Btu (MMBtu) on Wednesday, May 4, to $4.23 per MMBtu on Wednesday, May 11. At the New York Mercantile Exchange, the price of the near-month natural gas contract (June 2011) dropped almost 9 percent, falling from $4.577 per MMBtu last Wednesday to $4.181 yesterday. Working natural gas in storage rose by 70 billion cubic feet (Bcf) to 1,827 Bcf, according to EIAÂ’s Weekly Natural Gas Storage Report.

490

Natural Gas Weekly Update  

Gasoline and Diesel Fuel Update (EIA)

2, 2010 at 2:00 P.M. 2, 2010 at 2:00 P.M. Next Release: Thursday, July 29, 2010 Overview Prices Storage Other Market Trends Natural Gas Transportation Update Overview (For the Week Ending Wednesday, July 21, 2010) Natural gas prices rose across market locations in the lower 48 States during the report week. The Henry Hub natural gas spot price rose 31 cents, or 7 percent, during the week, averaging $4.70 per million Btu (MMBtu) yesterday, July 21. At the New York Mercantile Exchange (NYMEX), the price of the August 2010 natural gas futures contract for delivery at the Henry Hub rose about 21 cents, or 5 percent, ending the report week at $4.513 per MMBtu. Working natural gas in storage increased to 2,891 billion cubic feet (Bcf) as of Friday, July 16, according to EIAÂ’s Weekly Natural Gas Storage

491

GAS METERING PUMP  

DOE Patents (OSTI)

A liquid piston gas pump is described, capable of pumping minute amounts of gas in accurately measurable quantities. The pump consists of a flanged cylindrical regulating chamber and a mercury filled bellows. Sealed to the ABSTRACTS regulating chamber is a value and having a gas inlet and outlet, the inlet being connected by a helical channel to the bellows. A gravity check valve is in the gas outlet, so the gas passes through the inlet and the helical channel to the bellows where the pumping action as well as the metering is accomplished by the actuation of the mercury filled bellows. The gas then flows through the check valve and outlet to any associated apparatus.

George, C.M.

1957-12-31T23:59:59.000Z

492

Thermodynamics of Chaplygin gas  

E-Print Network (OSTI)

We clarify thermodynamics of the Chaplygin gas by introducing the integrability condition. All thermal quantities are derived as functions of either volume or temperature. Importantly, we find a new general equation of state, describing the Chaplygin gas completely. We confirm that the Chaplygin gas could show a unified picture of dark matter and energy which cools down through the universe expansion without any critical point (phase transition).

Yun Soo Myung

2008-12-02T23:59:59.000Z

493

GAS DISCHARGE DEVICES  

DOE Patents (OSTI)

The construction of gas discharge devices where the object is to provide a gas discharge device having a high dark current and stabilized striking voltage is described. The inventors have discovered that the introduction of tritium gas into a discharge device with a subsequent electrical discharge in the device will deposit tritium on the inside of the chamber. The tritium acts to emit beta rays amd is an effective and non-hazardous way of improving the abovementioned discharge tube characteristics

Arrol, W.J.; Jefferson, S.

1957-08-27T23:59:59.000Z

494

Thermodynamics of Chaplygin gas  

E-Print Network (OSTI)

We clarify thermodynamics of the Chaplygin gas by introducing the integrability condition. All thermal quantities are derived as functions of either volume or temperature. Importantly, we find a new general equation of state, describing the Chaplygin gas completely. We confirm that the Chaplygin gas could show a unified picture of dark matter and energy which cools down through the universe expansion without any critical point (phase transition).

Myung, Yun Soo

2008-01-01T23:59:59.000Z

495

Pulsed gas laser  

DOE Patents (OSTI)

A pulsed gas laser is constituted by Blumlein circuits wherein space metal plates function both as capacitors and transmission lines coupling high frequency oscillations to a gas filled laser tube. The tube itself is formed by spaced metal side walls which function as connections to the electrodes to provide for a high frequency, high voltage discharge in the tube to cause the gas to lase. Also shown is a spark gap switch having structural features permitting a long life.

Anderson, Louis W. (Madison, WI); Fitzsimmons, William A. (Madison, WI)

1978-01-01T23:59:59.000Z

496

Valve for gas centrifuges  

DOE Patents (OSTI)

The invention is a pneumatically operated valve assembly for simultaneously (1) closing gas-transfer lines connected to a gas centrifuge or the like and (2) establishing a recycle path between two of the lines so closed. The valve assembly is especially designed to be compact, fast-acting, reliable, and comparatively inexpensive. It provides large reductions in capital costs for gas-centrifuge cascades.

Hahs, Charles A. (Oak Ridge, TN); Burbage, Charles H. (Oak Ridge, TN)

1984-01-01T23:59:59.000Z

497

31808,"AECTRA REFG & MKTG",1,133,"MOTOR GAS, FINISHED UNLEADED...  

U.S. Energy Information Administration (EIA) Indexed Site

PROCESSOR-TX","UNKNOWN PROCESSOR-TX","TX","TEXAS",3 31808,"AGWAY PETRO CORP",1,231,"PROPANENGL",0712,"CHAMPL-RS PT, NY","NEW YORK",1,260,"CANADA",3,0,0,,,,, 31808,"ALPENA OIL...

498

Natural Gas Weekly Update  

Annual Energy Outlook 2012 (EIA)

each of the consumption sectors, excluding the industrial sector, according to BENTEK Energy Services, LLC. Moderating temperatures likely contributed to lower natural gas...

499

4. Natural Gas Statistics  

U.S. Energy Information Administration (EIA)

hydraulic fracturing, including shales and low permeability (tight) formations. Total U.S. dry natural gas reserves additions replaced 237 percent of 2007 dry

500

Greenhouse Gas Emission Measurements  

Science Conference Proceedings (OSTI)

... climate change as a serious problem and that greenhouse gas (GHG ... models to determine the baselines of GHG emissions and the effect of GHG ...

2010-10-05T23:59:59.000Z