National Library of Energy BETA

Sample records for functional design document

  1. SANSMIC design document.

    SciTech Connect (OSTI)

    Weber, Paula D.; Rudeen, David Keith

    2015-07-01

    The United States Strategic Petroleum Reserve (SPR) maintains an underground storage system consisting of caverns that were leached or solution mined in four salt domes located near the Gulf of Mexico in Texas and Louisiana. The SPR comprises more than 60 active caverns containing approximately 700 million barrels of crude oil. Sandia National Labo- ratories (SNL) is the geotechnical advisor to the SPR. As the most pressing need at the inception of the SPR was to create and fill storage volume with oil, the decision was made to leach the caverns and fill them simultaneously (leach-fill). Therefore, A.J. Russo developed SANSMIC in the early 1980s which allows for a transient oil-brine interface (OBI) making it possible to model leach-fill and withdrawal operations. As the majority of caverns are currently filled to storage capacity, the primary uses of SANSMIC at this time are related to the effects of small and large withdrawals, expansion of existing caverns, and projecting future pillar to diameter ratios. SANSMIC was identified by SNL as a priority candidate for qualification. This report continues the quality assurance (QA) process by documenting the "as built" mathematical and numerical models that comprise this document. The pro- gram flow is outlined and the models are discussed in detail. Code features that were added later or were not documented previously have been expounded. No changes in the code's physics have occurred since the original documentation (Russo, 1981, 1983) although recent experiments may yield improvements to the temperature and plume methods in the future.

  2. Cryptographic Trust Management System Design Document

    SciTech Connect (OSTI)

    Edgar, Thomas W.; Clements, Samuel L.; Hadley, Mark D.; Maiden, Wendy M.; Manz, David O.; Zabriskie, Sean J.

    2010-08-04

    Deliverable for DOE NSTB Cryptographic Trust Management project. Design document to follow the Requirements document submitted in Sept 2009.

  3. Tank Monitoring and Document control System (TMACS) As Built Software Design Document

    SciTech Connect (OSTI)

    GLASSCOCK, J.A.

    2000-01-27

    This document describes the software design for the Tank Monitor and Control System (TMACS). This document captures the existing as-built design of TMACS as of November 1999. It will be used as a reference document to the system maintainers who will be maintaining and modifying the TMACS functions as necessary. The heart of the TMACS system is the ''point-processing'' functionality where a sample value is received from the field sensors and the value is analyzed, logged, or alarmed as required. This Software Design Document focuses on the point-processing functions.

  4. Project W-441, cold vacuum drying facility design requirements document

    SciTech Connect (OSTI)

    O`Neill, C.T.

    1997-05-08

    This document has been prepared and is being released for Project W-441 to record the design basis for the design of the Cold Vacuum Drying Facility. This document sets forth the physical design criteria, Codes and Standards, and functional requirements that were used in the design of the Cold Vacuum Drying Facility. This document contains section 3, 4, 6, and 9 of the Cold Vacuum Drying Facility Design Requirements Document. The remaining sections will be issued at a later date. The purpose of the Facility is to dry, weld, and inspect the Multi-Canister Overpacks before transport to dry storage.

  5. COG Software Architecture Design Description Document

    SciTech Connect (OSTI)

    Buck, R M; Lent, E M

    2009-09-21

    This COG Software Architecture Design Description Document describes the organization and functionality of the COG Multiparticle Monte Carlo Transport Code for radiation shielding and criticality calculations, at a level of detail suitable for guiding a new code developer in the maintenance and enhancement of COG. The intended audience also includes managers and scientists and engineers who wish to have a general knowledge of how the code works. This Document is not intended for end-users. This document covers the software implemented in the standard COG Version 10, as released through RSICC and IAEA. Software resources provided by other institutions will not be covered. This document presents the routines grouped by modules and in the order of the three processing phases. Some routines are used in multiple phases. The routine description is presented once - the first time the routine is referenced. Since this is presented at the level of detail for guiding a new code developer, only the routines invoked by another routine that are significant for the processing phase that is being detailed are presented. An index to all routines detailed is included. Tables for the primary data structures are also presented.

  6. Design requirements document for the interim store phase I solidified high-level waste function 4.2.4.1.2

    SciTech Connect (OSTI)

    Calmus, R.B.

    1996-09-30

    The U.S. Department of Energy (DOE) has embarked upon a course to acquire Hanford site.t,,nk waste tr:atment and immobilization services using privatized facilities. This plan contains a two-phased approach. Phase I is a ``proof-of-principle/commercial demonstration-scale`` effort and Phase II is a full-scale production effort. In accordance with the planned approach, interim storage and disposal of various products from privatized facilities are to be DOE furnished. The path forward adopted for Phase I solidified high-level waste (HLW) interim storage entails use of Vaut 2 and 3 in the Hanford Site Spent Nuclear Fuels Canister Storage Building (CSB), to be located in the Hanford Site 200 East Area. This design requirements document establishes the functions, with associated requirements, allocated to the Phase I solidified HLW interim storage system. These requirements will be used as the basis for conceptual design of the CSB and supporting systems. This document will also provide the basis for preparation of a performance specification for design and construction activities necessary to achieve the overall project mission.

  7. Design Principles for Materials with Magnetic Functionality ...

    Office of Scientific and Technical Information (OSTI)

    Design Principles for Materials with Magnetic Functionality Citation Details In-Document Search Title: Design Principles for Materials with Magnetic Functionality This report ...

  8. Design documentation: Krypton encapsulation preconceptual design

    SciTech Connect (OSTI)

    Knecht, D.A.

    1994-10-01

    US EPA regulations limit the release of Krypton-85 to the environment from commercial facilities after January 1, 1983. In order to comply with these regulations, Krypton-85, which would be released during reprocessing of commercial nuclear fuel, must be collected and stored. Technology currently exists for separation of krypton from other inert gases, and for its storage as a compressed gas in steel cylinders. The requirements, which would be imposed for 100-year storage of Krypton-85, have led to development of processes for encapsulation of krypton within a stable solid matrix. The objective of this effort was to provide preconceptual engineering designs, technical evaluations, and life cycle costing data for comparison of two alternate candidate processes for encapsulation of Krypton-85. This report has been prepared by The Ralph M. Parsons Company for the US Department of Energy.

  9. GENII Version 2 Software Design Document

    SciTech Connect (OSTI)

    Napier, Bruce A.; Strenge, Dennis L.; Ramsdell, James V.; Eslinger, Paul W.; Fosmire, Christian J.

    2004-03-08

    This document describes the architectural design for the GENII-V2 software package. This document defines details of the overall structure of the software, the major software components, their data file interfaces, and specific mathematical models to be used. The design represents a translation of the requirements into a description of the software structure, software components, interfaces, and necessary data. The design focuses on the major components and data communication links that are key to the implementation of the software within the operating framework. The purpose of the GENII-V2 software package is to provide the capability to perform dose and risk assessments of environmental releases of radionuclides. The software also has the capability of calculating environmental accumulation and radiation doses from surface water, groundwater, and soil (buried waste) media when an input concentration of radionuclide in these media is provided. This report represents a detailed description of the capabilities of the software product with exact specifications of mathematical models that form the basis for the software implementation and testing efforts. This report also presents a detailed description of the overall structure of the software package, details of main components (implemented in the current phase of work), details of data communication files, and content of basic output reports. The GENII system includes the capabilities for calculating radiation doses following chronic and acute releases. Radionuclide transport via air, water, or biological activity may be considered. Air transport options include both puff and plume models, each allow use of an effective stack height or calculation of plume rise from buoyant or momentum effects (or both). Building wake effects can be included in acute atmospheric release scenarios. The code provides risk estimates for health effects to individuals or populations; these can be obtained using the code by applying

  10. Designating and Supporting NEPA Document Managers (DOE, 1998) | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Designating and Supporting NEPA Document Managers (DOE, 1998) Designating and Supporting NEPA Document Managers (DOE, 1998) The purpose of this memorandum is to emphasize the important role that National Environmental Policy Act (NEPA) Document Managers play in the success of the DOE's NEPA compliance program and to help maximize their effectiveness. Designating and Supporting NEPA Document Managers (462.08 KB) More Documents & Publications Lessons Learned Quarterly Report,

  11. Surveillance Analysis Computer System (SACS) software design document (SDD)

    SciTech Connect (OSTI)

    Glasscock, J.A.

    1995-09-01

    This document contains the Software Design Description for Phase II of the SACS project, and Impact Level 3Q system

  12. Research Update: Towards designed functionalities in oxide-based...

    Office of Scientific and Technical Information (OSTI)

    Research Update: Towards designed functionalities in oxide-based electronic materials Citation Details In-Document Search Title: Research Update: Towards designed functionalities...

  13. Tank waste remediation system functions and requirements document

    SciTech Connect (OSTI)

    Carpenter, K.E

    1996-10-03

    This is the Tank Waste Remediation System (TWRS) Functions and Requirements Document derived from the TWRS Technical Baseline. The document consists of several text sections that provide the purpose, scope, background information, and an explanation of how this document assists the application of Systems Engineering to the TWRS. The primary functions identified in the TWRS Functions and Requirements Document are identified in Figure 4.1 (Section 4.0) Currently, this document is part of the overall effort to develop the TWRS Functional Requirements Baseline, and contains the functions and requirements needed to properly define the top three TWRS function levels. TWRS Technical Baseline information (RDD-100 database) included in the appendices of the attached document contain the TWRS functions, requirements, and architecture necessary to define the TWRS Functional Requirements Baseline. Document organization and user directions are provided in the introductory text. This document will continue to be modified during the TWRS life-cycle.

  14. Designating and Supporting NEPA Document Managers

    Office of Energy Efficiency and Renewable Energy (EERE)

    The purpose of this memorandum is to emphasize the important role that National Environmental Policy Act (NEPA) Document Managers play in the success of the DOE's NEPA compliance program and to help maximize their effectiveness.

  15. System design document U-AVLIS control system architecture

    SciTech Connect (OSTI)

    Viebeck, P.G.

    1994-02-16

    This document describes the architecture of the integrated control system for the U-AVLIS process. It includes an overview of the major control system components and their interfaces to one another. Separate documents are utilized to fully describe each component mentioned herein. The purpose of this document is to introduce the reader to the integrated U-AVLIS control system. It describes the philosophy of the control system architecture and how all of the control system components are integrated. While the other System Design Documents describe in detail the design of individual control system components, this document puts those components into their correct context within the entire integrated control system.

  16. Preliminary design requirements document for the initial single-shell tank retrieval system

    SciTech Connect (OSTI)

    Hertzel, J.S., Westinghouse Hanford

    1996-07-24

    The scope of this Preliminary Design Requirements Document is to identify and define the functions, with associated requirements, which must be performed to demonstrate and accomplish the initial single-shell tank saltcake retrieval from selected tanks. This document sets forth functions, requirements, performance requirements and design constraints necessary to begin conceptual design for the Initial Single-shell Tank Retrieval System. System and physical interfaces between the Initial Single-shell Tank Retrieval System project and the Tank Waste Remediation are identified. The constraints, performance requirements, and transfer of information and data across a technical interface will be documented in an Interface Control Document. The design requirements provided in this document will be augmented by additional detailed design to be documented by the project.

  17. Preliminary design requirements document for Project W-378, low-level waste vitrification plant

    SciTech Connect (OSTI)

    Swanson, L.M.

    1995-03-31

    The scope of this preliminary Design Requirements Document (DRD) is to identify and define the functions, with associated requirements, which must be performed to accomplish vitrification and disposal of the pretreated low-level waste (LLW) fraction of the Hanford Site tank waste. This document sets forth function requirements, performance requirements and design constraints necessary to begin conceptual design for the Low-Level Waste Vitrification Plant (LLWVP). System and physical interfaces between the LLWVP Project and the Tank Waste Remediation System (TWRS) are identified. The constraints, performance requirements, and transfer of information and data across a technical interface will be documented in an Interface Control Document. The design requirements provided in this document will be augmented by additional detailed design data to be documented by the project.

  18. Severe Accident Test Station Design Document

    SciTech Connect (OSTI)

    Snead, Mary A.; Yan, Yong; Howell, Michael; Keiser, James R.; Terrani, Kurt A.

    2015-09-01

    The purpose of the ORNL severe accident test station (SATS) is to provide a platform for evaluation of advanced fuels under projected beyond design basis accident (BDBA) conditions. The SATS delivers the capability to map the behavior of advanced fuels concepts under accident scenarios across various temperature and pressure profiles, steam and steam-hydrogen gas mixtures, and thermal shock. The overall facility will include parallel capabilities for examination of fuels and irradiated materials (in-cell) and non-irradiated materials (out-of-cell) at BDBA conditions as well as design basis accident (DBA) or loss of coolant accident (LOCA) conditions. Also, a supporting analytical infrastructure to provide the data-needs for the fuel-modeling components of the Fuel Cycle Research and Development (FCRD) program will be put in place in a parallel manner. This design report contains the information for the first, second and third phases of design and construction of the SATS. The first phase consisted of the design and construction of an out-of-cell BDBA module intended for examination of non-irradiated materials. The second phase of this work was to construct the BDBA in-cell module to test irradiated fuels and materials as well as the module for DBA (i.e. LOCA) testing out-of-cell, The third phase was to build the in-cell DBA module. The details of the design constraints and requirements for the in-cell facility have been closely captured during the deployment of the out-of-cell SATS modules to ensure effective future implementation of the in-cell modules.

  19. Central Equatorial Pacific Experiment (CEPEX). Design document

    SciTech Connect (OSTI)

    Not Available

    1993-04-01

    The Earth`s climate has varied significantly in the past, yet climate records reveal that in the tropics, sea surface temperatures seem to have been remarkably stable, varying by less than a few degrees Celsius over geologic time. Today, the large warm pool of the western Pacific shows similar characteristics. Its surface temperature always exceeds 27{degree}C, but never 31{degree}C. Heightened interest in this observation has been stimulated by questions of global climate change and the exploration of stabilizing climate feedback processes. Efforts to understand the observed weak sensitivity of tropical sea surface temperatures to climate forcing has led to a number of competing ideas about the nature of this apparent thermostat. Although there remains disagreement on the processes that regulate tropical sea surface temperature, most agree that further progress in resolving these differences requires comprehensive field observations of three-dimensional water vapor concentrations, solar and infrared radiative fluxes, surface fluxes of heat and water vapor, and cloud microphysical properties. This document describes the Central Equatorial Pacific Experiment (CEPEX) plan to collect such observations over the central equatorial Pacific Ocean during March of 1993.

  20. Functional Area Criteria & Review Approach Documents

    Broader source: Energy.gov [DOE]

    CRADS provided on this page are provided as examples of functional area Objectives and Criteria used to evaluate how requirements are meet. They are only examples and should not be utilized as is. In accordance with DOE Standard 3006-2010, CRADs should be developed by team members to reflect the specifics of the proposed review (i.e., breadth and depth) as defined in the approved Plan of Action.

  1. Canister Storage Building (CSB) Design Basis Accident Analysis Documentation

    SciTech Connect (OSTI)

    CROWE, R.D.

    1999-09-09

    This document provides the detailed accident analysis to support ''HNF-3553, Spent Nuclear Fuel Project Final Safety, Analysis Report, Annex A,'' ''Canister Storage Building Final Safety Analysis Report.'' All assumptions, parameters, and models used to provide the analysis of the design basis accidents are documented to support the conclusions in the Canister Storage Building Final Safety Analysis Report.

  2. Cold Vacuum Drying (CVD) Facility Design Basis Accident Analysis Documentation

    SciTech Connect (OSTI)

    PIEPHO, M.G.

    1999-10-20

    This document provides the detailed accident analysis to support HNF-3553, Annex B, Spent Nuclear Fuel Project Final Safety Analysis Report, ''Cold Vacuum Drying Facility Final Safety Analysis Report (FSAR).'' All assumptions, parameters and models used to provide the analysis of the design basis accidents are documented to support the conclusions in the FSAR.

  3. Canister Storage Building (CSB) Design Basis Accident Analysis Documentation

    SciTech Connect (OSTI)

    CROWE, R.D.; PIEPHO, M.G.

    2000-03-23

    This document provided the detailed accident analysis to support HNF-3553, Spent Nuclear Fuel Project Final Safety Analysis Report, Annex A, ''Canister Storage Building Final Safety Analysis Report''. All assumptions, parameters, and models used to provide the analysis of the design basis accidents are documented to support the conclusions in the Canister Storage Building Final Safety Analysis Report.

  4. Canister storage building design basis accident analysis documentation

    SciTech Connect (OSTI)

    KOPELIC, S.D.

    1999-02-25

    This document provides the detailed accident analysis to support HNF-3553, Spent Nuclear Fuel Project Final Safety Analysis Report, Annex A, ''Canister Storage Building Final Safety Analysis Report.'' All assumptions, parameters, and models used to provide the analysis of the design basis accidents are documented to support the conclusions in the Canister Storage Building Final Safety Analysis Report.

  5. Attachment L-7b Vietnam Design Requirements Document is an Official

    National Nuclear Security Administration (NNSA)

    b Vietnam Design Requirements Document is an Official Use Only document please see Section ... The Government considers the Vietnam Design Requirements Document, Attachment L-7b an ...

  6. Design requirements document for Project W-465, immobilized low-activity waste interim storage

    SciTech Connect (OSTI)

    Burbank, D.A.

    1998-05-19

    The scope of this Design Requirements Document (DRD) is to identify the functions and associated requirements that must be performed to accept, transport, handle, and store immobilized low-activity waste (ILAW) produced by the privatized Tank Waste Remediation System (TWRS) treatment contractors. The functional and performance requirements in this document provide the basis for the conceptual design of the TWRS ILAW Interim Storage facility project and provides traceability from the program level requirements to the project design activity. Technical and programmatic risk associated with the TWRS planning basis are discussed in the Tank Waste Remediation System Decisions and Risk Assessment (Johnson 1994). The design requirements provided in this document will be augmented by additional detailed design data documented by the project.

  7. Design requirements document for project W-520, immobilized low-activity waste disposal

    SciTech Connect (OSTI)

    Ashworth, S.C.

    1998-08-06

    This design requirements document (DRD) identifies the functions that must be performed to accept, handle, and dispose of the immobilized low-activity waste (ILAW) produced by the Tank Waste Remediation System (TWRS) private treatment contractors and close the facility. It identifies the requirements that are associated with those functions and that must be met. The functional and performance requirements in this document provide the basis for the conceptual design of the Tank Waste Remediation System Immobilized Low-Activity Waste disposal facility project (W-520) and provides traceability from the program-level requirements to the project design activity.

  8. Liquid Observation Well (LOW) Functional Design

    SciTech Connect (OSTI)

    Paul, B.

    1995-01-04

    This document presents the Functional Design Criteria for installing Liquid Observation Wells (LOWS) into single-shell tanks containing either ferrocyanide or organic waste. The LOWs will be designed to accommodate the deployment of gamma, neutron, and electromagnetic induction probes and to interface with the existing tank structure and environment.

  9. Supplemental design requirements document solid waste operations complex

    SciTech Connect (OSTI)

    Ocampo, V.P.; Boothe, G.F.; Broz, D.R.; Eaton, H.E.; Greager, T.M.; Huckfeldt, R.A.; Kooiker, S.L.; Lamberd, D.L.; Lang, L.L.; Myers, J.B.

    1994-11-01

    This document provides additional and supplemental information to the WHC-SD-W112-FDC-001, WHC-SD-W113-FDC-001, and WHC-SD-W100-FDC-001. It provides additional requirements for the design and summarizes Westinghouse Hanford Company key design guidance and establishes the technical baseline agreements to be used for definitive design common to the Solid Waste Operations Complex (SWOC) Facilities (Project W-112, Project W-113, and WRAP 2A).

  10. The System 80+ Standard Plant design control document. Volume 17

    SciTech Connect (OSTI)

    1997-12-31

    This Design Control Document (DCD) is a repository of information comprising the System 80+{trademark} Standard Plant Design. The DCD also provides that design-related information to be incorporated by reference in the design certification rule for the System 80+ Standard Plant Design. Applicants for a combined license pursuant to 10 CFR 52 must ensure that the final Design Certification Rule and the associated Statements of Consideration are used when making all licensing decisions relevant to the System 80+ Standard Plant Design. The Design Control Document contains the DCD introduction, The Certified Design Material (CDM) [i.e., ``Tier 1``] and the Approved Design Material (ADM) [i.e., ``Tier 2``] for the System 80+ Standard Plant Design. The CDM includes the following sections: (1) Introductory material; (2) Certified Design Material for System 80+ systems and structures; (3) Certified Design Material for non-system-based aspects of the System 80+ Certified design; (4) Interface requirements; and (5) Site parameters. The ADM, to the extent applicable for the System 80+ Standard Plant Design, includes: (1) the information required for the final safety analysis report under 20 CFR 50.34; (2) other relevant information required by 10 CFR 52.47; and (3) emergency operations guidelines. This volume contains parts 2-7 and appendix 15A for section 15 (Accident Analysis) of the ADM Design and Analysis. Topics covered in these parts are: decrease in heat removal; decrease in RCS flow rate; power distribution anomalies; increase in RCS inventory; decrease in RCS inventory; release of radioactive materials. The appendix covers radiological release models. Also contained here are five technical specifications for section 16 (Technical Specifications) of the ADM Design and Analysis. They are: TS 1.0 Use and Applications; TS 2.0 Safety Limits; TS 3.0 LCO Availability; TS 3.1 Reactivity Control; and TS 3.2 Power Distribution.

  11. Options Study Documenting the Fast Reactor Fuels Innovative Design Activity

    SciTech Connect (OSTI)

    Jon Carmack; Kemal Pasamehmetoglu

    2010-07-01

    This document provides presentation and general analysis of innovative design concepts submitted to the FCRD Advanced Fuels Campaign by nine national laboratory teams as part of the Innovative Transmutation Fuels Concepts Call for Proposals issued on October 15, 2009 (Appendix A). Twenty one whitepapers were received and evaluated by an independent technical review committee.

  12. GCtool for fuel cell systems design and analysis : user documentation.

    SciTech Connect (OSTI)

    Ahluwalia, R.K.; Geyer, H.K.

    1999-01-15

    GCtool is a comprehensive system design and analysis tool for fuel cell and other power systems. A user can analyze any configuration of component modules and flows under steady-state or dynamic conditions. Component models can be arbitrarily complex in modeling sophistication and new models can be added easily by the user. GCtool also treats arbitrary system constraints over part or all of the system, including the specification of nonlinear objective functions to be minimized subject to nonlinear, equality or inequality constraints. This document describes the essential features of the interpreted language and the window-based GCtool environment. The system components incorporated into GCtool include a gas flow mixer, splitier, heater, compressor, gas turbine, heat exchanger, pump, pipe, diffuser, nozzle, steam drum, feed water heater, combustor, chemical reactor, condenser, fuel cells (proton exchange membrane, solid oxide, phosphoric acid, and molten carbonate), shaft, generator, motor, and methanol steam reformer. Several examples of system analysis at various levels of complexity are presented. Also given are instructions for generating two- and three-dimensional plots of data and the details of interfacing new models to GCtool.

  13. Designating and Supporting NEPA Document Managers (November 24, 1998)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    UUI= f- 1;;2b.~ (08-93) United States Government Department of Energy memorandum DATE:November 24, 1998 RA~~Y 6~ Office ofNEPA Policy and Assistance:Daniel:6-9760 SUBJECT: Designating and Supporting NEPA Document Managers TO: Secretarial Officersand Heads ofField Organizations The purpose of this memorandumis to emphasizeto you the important role your National EnvironmentalPolicy Act (NEPA) Document Managers play in the success of the Department's NEPA compliance program and to help you

  14. Solar Power Tower Design Basis Document, Revision 0

    SciTech Connect (OSTI)

    ZAVOICO,ALEXIS B.

    2001-07-01

    This report contains the design basis for a generic molten-salt solar power tower. A solar power tower uses a field of tracking mirrors (heliostats) that redirect sunlight on to a centrally located receiver mounted on top a tower, which absorbs the concentrated sunlight. Molten nitrate salt, pumped from a tank at ground level, absorbs the sunlight, heating it up to 565 C. The heated salt flows back to ground level into another tank where it is stored, then pumped through a steam generator to produce steam and make electricity. This report establishes a set of criteria upon which the next generation of solar power towers will be designed. The report contains detailed criteria for each of the major systems: Collector System, Receiver System, Thermal Storage System, Steam Generator System, Master Control System, and Electric Heat Tracing System. The Electric Power Generation System and Balance of Plant discussions are limited to interface requirements. This design basis builds on the extensive experience gained from the Solar Two project and includes potential design innovations that will improve reliability and lower technical risk. This design basis document is a living document and contains several areas that require trade-studies and design analysis to fully complete the design basis. Project- and site-specific conditions and requirements will also resolve open To Be Determined issues.

  15. Project W-236A, work plan for preparation of a design requirements document

    SciTech Connect (OSTI)

    Groth, B.D.

    1995-01-30

    This work plan outlines the tasks necessary, and defines the organizational responsibilities for preparing a Design Requirements Document (DRD) for project W-236A, Multi-Function Waste Tank Facility (MWTF). A DRD is a Systems Engineering document which bounds, at a high level, the requirements of a discrete system element of the Tank Waste Remediation System (TWRS) Program. This system element is usually assigned to a specific project, in this case the MWTF. The DRD is the document that connects the TWRS program requirements with the highest level projects requirements and provides the project`s link to the overall TWRS mission. The MWTF DRD effort is somewhat unique in that the project is already in detailed design, whereas a DRO is normally prepared prior to preliminary design. The MWTF design effort was initiated with a Functional Design Criteria (FDC) and a Supplemental Design Requirements Document (SDRD) bounding the high level requirements. Another unique aspect of this effort is that some of the TWRS program requirements are still in development. Because of these unique aspects of the MWTF DRD development, the MWTF will be developed from existing TWRS Program requirements and project specific requirements contained in the FDC and SDRD. The following list describes the objectives of the MWTF DRD: determine the primary functions of the tanks through a functional decomposition of the TWRS Program high level functions; allocate the primary functions to a sub-system architecture for the tanks; define the fundamental design features in terms of performance requirements for the system and subsystems; identify system interfaces and design constraints; and document the results in a DRD.

  16. Document

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    171 Federal Register / Vol. 75, No. 108 / Monday, June 7, 2010 / Notices an accessible format (e.g., braille, large print, audiotape, or computer diskette) on request to the contact person listed under FOR FURTHER INFORMATION CONTACT. Electronic Access to This Document You can view this document, as well as all other documents of this Department published in the Federal Register, in text or Adobe Portable Document Format (PDF) on the Internet at the following site: http://www.ed.gov/

  17. Decision document for function 4.2.4 dispose waste

    SciTech Connect (OSTI)

    Claghorn, R.D.

    1996-09-23

    This report formally documents the planning assumptions for Function 4.2.4, Dispose Waste, to provide a basis for lower level Tank Waste Remediation System (TWRS) Disposal Program decisions and analyses. The TWRS Environmental Impact Statement (DOE/EIS 1996) and a supplemental Environmental Impact Statement for closure of operable units will provide the ultimate Records of Decision for the TWRS strategy at this level. However, in the interim, this decision document provides a formal basis for the TWRS Dispose Waste planning assumptions. Function 4.2.4 addresses the disposition of immobilized high-level waste (IHLW), the disposition of immobilized low-activity waste (ILAW), and closure of the tank farm operable units.

  18. Decision document for function 4.2.4 dispose waste

    SciTech Connect (OSTI)

    Mcconville, C.M.

    1996-09-23

    This report formally documents the planning assumptions for Function 4.2.4, {ital Dispose Waste} to provide a basis for lower level Tank Waste Remediation System (TWRS) Disposal Program decisions and analyses. The TWRS Environmental Impact Statement (DOE/EIS 1996) and a supplemental Environmental Impact Statement for closure of operable units will provide the ultimate Records of Decision for the TWRS strategy at this level. However, in the interim, this decision document provides a formal basis for the TWRS Dispose Waste planning assumptions. Function 4.2.4 addresses the disposition of immobilized high-level waste (IHLW), the disposition of immobilized low-activity waste (ILAW), and closure of the tank farm operable units.

  19. Cold Vacuum Drying facility design basis accident analysis documentation

    SciTech Connect (OSTI)

    CROWE, R.D.

    2000-08-08

    This document provides the detailed accident analysis to support HNF-3553, Annex B, Spent Nuclear Fuel Project Final Safety Analysis Report (FSAR), ''Cold Vacuum Drying Facility Final Safety Analysis Report.'' All assumptions, parameters, and models used to provide the analysis of the design basis accidents are documented to support the conclusions in the FSAR. The calculations in this document address the design basis accidents (DBAs) selected for analysis in HNF-3553, ''Spent Nuclear Fuel Project Final Safety Analysis Report'', Annex B, ''Cold Vacuum Drying Facility Final Safety Analysis Report.'' The objective is to determine the quantity of radioactive particulate available for release at any point during processing at the Cold Vacuum Drying Facility (CVDF) and to use that quantity to determine the amount of radioactive material released during the DBAs. The radioactive material released is used to determine dose consequences to receptors at four locations, and the dose consequences are compared with the appropriate evaluation guidelines and release limits to ascertain the need for preventive and mitigative controls.

  20. Documents

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Summation version Stakeholder Summation version DOE Documents Environmental Management SSAB 15 Year Anniversary Paper (presented at the Waste Management Symposium, March 4, 2009)...

  1. Phase I privatization - raw and potable water design requirements document

    SciTech Connect (OSTI)

    Parazin, R.J.

    1996-09-30

    The U.S. Department of Energy has chosen to accomplish the Tank Waste Remediation System disposal mission via privatization. The disposal mission has been divided into two phases. Phase I, a `proof of concept` phase, will establish and demonstrate the technical, commercial, and procurement capabilities necessary for privatization to proceed. Once established on this relatively small scale, privatization will be expanded, through a second competition, in the form of a second phase (Phase II) to dispose of the remainder of the tank waste. The Phase I privatization site will be located in the former Grout Disposal Site area. To prepare the site for use for the private contractors, utilities must be extended from the 200 East Area infrastructure. This document describes the design requirements for the prime water services; i.e raw, fire suppression and sanitary (potable) to be provided to the private contractors. These requirements will be used in directing the conceptual design of these proposed water services.

  2. Supplemental design requirements document, Multifunction Waste Tank Facility, Project W-236A. Revision 1

    SciTech Connect (OSTI)

    Groth, B.D.

    1995-01-11

    The Multi-Function Waste Tank Facility (MWTF) consists of four, nominal 1 million gallon, underground double-shell tanks, located in the 200-East area, and two tanks of the same capacity in the 200-West area. MWTF will provide environmentally safe storage capacity for wastes generated during remediation/retrieval activities of existing waste storage tanks. This document delineates in detail the information to be used for effective implementation of the Functional Design Criteria requirements.

  3. Software Design Document for the AMP Nuclear Fuel Performance Code

    SciTech Connect (OSTI)

    Philip, Bobby; Clarno, Kevin T; Cochran, Bill

    2010-03-01

    The purpose of this document is to describe the design of the AMP nuclear fuel performance code. It provides an overview of the decomposition into separable components, an overview of what those components will do, and the strategic basis for the design. The primary components of a computational physics code include a user interface, physics packages, material properties, mathematics solvers, and computational infrastructure. Some capability from established off-the-shelf (OTS) packages will be leveraged in the development of AMP, but the primary physics components will be entirely new. The material properties required by these physics operators include many highly non-linear properties, which will be replicated from FRAPCON and LIFE where applicable, as well as some computationally-intensive operations, such as gap conductance, which depends upon the plenum pressure. Because there is extensive capability in off-the-shelf leadership class computational solvers, AMP will leverage the Trilinos, PETSc, and SUNDIALS packages. The computational infrastructure includes a build system, mesh database, and other building blocks of a computational physics package. The user interface will be developed through a collaborative effort with the Nuclear Energy Advanced Modeling and Simulation (NEAMS) Capability Transfer program element as much as possible and will be discussed in detail in a future document.

  4. Document

    National Nuclear Security Administration (NNSA)

    of the Draft EIS was also published in four local and regional newspapers (in English and Spanish) and over 200 copies of the document were distributed to federal, state...

  5. Document

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    published in the Federal Register, in text or Adobe Portable Document Format (PDF) on the Internet at the following site: http:www.ed.gov newsfedregister. To use PDF you must...

  6. Document

    National Nuclear Security Administration (NNSA)

    The Code of Federal Regulations is sold by the Superintendent of Documents. Prices of new books are listed in the first FEDERAL REGISTER issue of each week. Rules and Regulations ...

  7. Document

    National Nuclear Security Administration (NNSA)

    ... is available on the Internet through the NEPA Web site at http:www.gc.energy.govnepa. ... internet Web site at http:www.ferc.gov under the link to Documents and Filings. ...

  8. Document

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Beth Burandt, Document Manager, Office of River Protection, U.S. Department of Energy, Post Office Box 450, Mail Stop H6-60, Richland, WA 99352, Electronic mail: TC&WMEIS@saic.com. ...

  9. Conformance Tool High Level Design Document: IEC 61850 Cyber Security Acceleration Project

    SciTech Connect (OSTI)

    Edgar, Thomas W.

    2013-05-01

    This document is the high level design document for the Pacific Northwest National Laboratory (PNNL) IEC 62351-3, 4 and 6 standards conformance test software toolkit.

  10. SANSMIC design document. (Technical Report) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    documenting the "as built" mathematical and numerical models that comprise this document. ... to the temperature and plume methods in the future. less Authors: Weber, ...

  11. Document

    National Nuclear Security Administration (NNSA)

    60017 Federal Register / Vol. 76, No. 188 / Wednesday, September 28, 2011 / Notices 1 Enforcement of Statutes, Orders, Rules, and Regulations, 132 FERC ¶ 61,216 (2010). Persons who wish to comment only on the environmental review of this project should submit an original and two copies of their comments to the Secretary of the Commission. Environmental commentors will be placed on the Commission's environmental mailing list, will receive copies of the environmental documents, and will be

  12. Document

    Office of Environmental Management (EM)

    4 Federal Register / Vol. 68, No. 79 / Thursday, April 24, 2003 / Notices j. Deadline for filing comments and/ or motions: May 19, 2003. All documents (original and eight copies) should be filed with: Magalie R. Salas, Secretary, Federal Energy Regulatory Commission, 888 First Street, NE., Washington, DC 20426. Please include the project number (P- 10855-005) on any comments or motions filed. k. Description of Request: Upper Peninsula Power Company (UPPCO) proposes to add additional acreage to

  13. Document

    Office of Environmental Management (EM)

    of Energy Docket_N._EO-05-01signedby_Secretary_Bodman-_dated_92806.PDF Docket_N._EO-05-01signedby_Secretary_Bodman-_dated_92806.PDF (104.04 KB) More Documents & Publications Department of Energy Order No. 202-07-1 Senator Dingell Letter to Secretary Bodman Support for City of Alexandria's Comments on the District of Columbia Public Service Commission, Docket No. EO-05-01

    Dockets Open for Public Comment Dockets Open for Public Comment Below is a list of the dockets that are currently

  14. Design of the IPIRG-2 simulated seismic forcing function

    SciTech Connect (OSTI)

    Olson, R.; Scott, P.; Wilkowski, G.

    1996-02-01

    A series of pipe system experiments was conducted in IPIRG-2 that used a realistic seismic forcing function. Because the seismic forcing function was more complex than the single-frequency increasing-amplitude sinusoidal forcing function used in the IPIRG-1 pipe system experiments, considerable effort went into designing the function. This report documents the design process for the seismic forcing function used in the IPIRG-2 pipe system experiments.

  15. Supplemental design requirements document enhanced radioactive and mixed waste storage: Phase 5, Project W-113

    SciTech Connect (OSTI)

    Ocampo, V.P.

    1994-11-01

    This Supplemental Design Requirements Document (SDRD) is used to communicate Project W-113 specific plant design information from Westinghouse Hanford Company (WHC) to the United States Department of Energy (DOE) and the cognizant Architect Engineer (A/E). The SDRD is prepared after the completion of the project Conceptual Design report (CDR) and prior to the initiation of definitive design. Information in the SDRD serves two purposes: to convey design requirements that are too detailed for inclusion in the Functional Design Criteria (FDC) report and to serve as a means of change control for design commitments in the Title I and Title II design. The Solid Waste Retrieval Project (W-113) SDRD has been restructured from the equipment based outline used in previous SDRDs to a functional systems outline. This was done to facilitate identification of deficiencies in the information provided in the initial draft SDRD and aid design confirmation. The format and content of this SDRD adhere as closely as practicable to the requirements of WHC-CM-6-1, Standard Engineering Practices for Functional Design Criteria.

  16. Software design implementation document for TRAC-M data structures

    SciTech Connect (OSTI)

    Jolly-Woodruff, S. [Ogden Environmental and Energy Services (United States); Mahaffy, J. [Pennsylvania State Univ., University Park, PA (United States); Giguere, P.; Dearing, J.; Boyack, B. [Los Alamos National Lab., NM (United States)

    1997-07-01

    The Transient Reactor Analysis Code (TRAC)-M system-wide and component data structures are to be reimplemented by using the new features of Fortran 90 (F90). There will be no changes to the conceptual design, data flow, or computational flow with respect to the current TRAC-P, except that readability, maintainability, and extensibility will be improved. However, the task described here is a basic step that does not meet all future needs of the code, especially regarding extensibility. TRAC-M will be fully functional and will produce null computational changes with respect to TRAC-P, Version 5.4.25; computational efficiency will not be degraded significantly. The existing component and functional modularity and possibilities for coarse-grained parallelism will be retained.

  17. Document

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    97 Federal Register / Vol. 75, No. 65 / Tuesday, April 6, 2010 / Notices 1 DOE anticipates that, pursuant to Cal. Pub. Res. Code section 21000 et seq., California agencies will impose mitigation measures to address potential impacts and project design elements to verify the sequestration of CO 2 injected for EOR. will meet to review, develop and provide recommendations on all aspects of the academic and administrative policies of the University; examine all aspects of professional military

  18. Attachment L-7b Vietnam Design Requirements Document is an Official

    National Nuclear Security Administration (NNSA)

    b Vietnam Design Requirements Document is an Official Use Only document please see Section NNS-L-2000 for instructions to Obtain. Section NNS-L-2000 (a) (8) Official Use Only (OUO) Document. The Government considers the Vietnam Design Requirements Document, Attachment L-7b an OUO Document and it cannot be made available to the public via any public webpages (e.g. FebBizOpps, FedConnect, DICCE2 acquisition webpage, Reading Room). The Vietnam Design Requirements Document (DRD) may assist Offerors

  19. Functional Design Engineering Inc | Open Energy Information

    Open Energy Info (EERE)

    Functional Design Engineering Inc Jump to: navigation, search Name: Functional Design Engineering Inc Region: United States Sector: Marine and Hydrokinetic Website:...

  20. Microgrid Design Toolkit (MDT) Technical Documentation and Component Summaries

    SciTech Connect (OSTI)

    Arguello, Bryan; Gearhart, Jared Lee; Jones, Katherine A.; Eddy, John P.

    2015-09-01

    The Microgrid Design Toolkit (MDT) is a decision support software tool for microgrid designers to use during the microgrid design process. The models that support the two main capabilities in MDT are described. The first capability, the Microgrid Sizing Capability (MSC), is used to determine the size and composition of a new microgrid in the early stages of the design process. MSC is a mixed-integer linear program that is focused on developing a microgrid that is economically viable when connected to the grid. The second capability is focused on refining a microgrid design for operation in islanded mode. This second capability relies on two models: the Technology Management Optimization (TMO) model and Performance Reliability Model (PRM). TMO uses a genetic algorithm to create and refine a collection of candidate microgrid designs. It uses PRM, a simulation based reliability model, to assess the performance of these designs. TMO produces a collection of microgrid designs that perform well with respect to one or more performance metrics.

  1. Review and Approval of Nuclear Facility Safety Basis and Safety Design Basis Documents

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2014-12-19

    This Standard describes a framework and the criteria to be used for approval of (1) safety basis documents, as required by 10 Code of Federal Regulation (C.F.R.) 830, Nuclear Safety Management, and (2) safety design basis documents, as required by Department of Energy (DOE) Standard (STD)-1189-2008, Integration of Safety into the Design Process.

  2. Supplemental design requirements document enhanced radioactive and mixed waste storage Phase V Project W-112

    SciTech Connect (OSTI)

    Ocampo, V.P.; Boothe, G.F.; Greager, T.M.; Johnson, K.D.; Kooiker, S.L.; Martin, J.D.

    1994-11-01

    This document provides additional and supplemental information to WHC-SD-W112-FDC-001, Project W-112 for radioactive and mixed waste storage. It provides additional requirements for the design and summarizes Westinghouse Hanford Company key design guidance and establishes the technical baseline agreements to be used for definitive design of the Project W-112 facilities.

  3. Technical Support Document: 50% Energy Savings Design Technology Packages for Highway Lodging Buildings

    SciTech Connect (OSTI)

    Jiang, Wei; Gowri, Krishnan; Lane, Michael D.; Thornton, Brian A.; Rosenberg, Michael I.; Liu, Bing

    2009-09-28

    This Technical Support Document (TSD) describes the process, methodology and assumptions for development of the 50% Energy Savings Design Technology Packages for Highway Lodging Buildings, a design guidance document intended to provide recommendations for achieving 50% energy savings in highway lodging properties over the energy-efficiency levels contained in ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings.

  4. Technical Support Document: 50% Energy Savings Design Technology Packages for Medium Office Buildings

    SciTech Connect (OSTI)

    Thornton, Brian A.; Wang, Weimin; Lane, Michael D.; Rosenberg, Michael I.; Liu, Bing

    2009-09-01

    This Technical Support Document (TSD) describes the process and methodology for development of the Advanced Energy Design Guide for Medium Offices (AEDG-MO or the Guide), a design guidance document which intends to provide recommendations for achieving 50% energy savings in medium office buildings that just meet the requirements of ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings.

  5. Design Principles for Materials with Magnetic Functionality

    SciTech Connect (OSTI)

    Thompson, Joe David

    2015-11-05

    This report describes the processes involved with refining and testing design principles of high density, magnetic materials and while observing their magnetic functionality.

  6. Equipment design guidance document for flammable gas waste storage tank new equipment

    SciTech Connect (OSTI)

    Smet, D.B.

    1996-04-11

    This document is intended to be used as guidance for design engineers who are involved in design of new equipment slated for use in Flammable Gas Waste Storage Tanks. The purpose of this document is to provide design guidance for all new equipment intended for application into those Hanford storage tanks in which flammable gas controls are required to be addressed as part of the equipment design. These design criteria are to be used as guidance. The design of each specific piece of new equipment shall be required, as a minimum to be reviewed by qualified Unreviewed Safety Question evaluators as an integral part of the final design approval. Further Safety Assessment may be also needed. This guidance is intended to be used in conjunction with the Operating Specifications Documents (OSDs) established for defining work controls in the waste storage tanks. The criteria set forth should be reviewed for applicability if the equipment will be required to operate in locations containing unacceptable concentrations of flammable gas.

  7. Functional and operational requirements document : building 1012, Battery and Energy Storage Device Test Facility, Sandia National Laboratories, New Mexico.

    SciTech Connect (OSTI)

    Johns, William H.

    2013-11-01

    This report provides an overview of information, prior studies, and analyses relevant to the development of functional and operational requirements for electrochemical testing of batteries and energy storage devices carried out by Sandia Organization 2546, Advanced Power Sources R&D. Electrochemical operations for this group are scheduled to transition from Sandia Building 894 to a new Building located in Sandia TA-II referred to as Building 1012. This report also provides background on select design considerations and identifies the Safety Goals, Stakeholder Objectives, and Design Objectives required by the Sandia Design Team to develop the Performance Criteria necessary to the design of Building 1012. This document recognizes the Architecture-Engineering (A-E) Team as the primary design entity. Where safety considerations are identified, suggestions are provided to provide context for the corresponding operational requirement(s).

  8. Review and Approval of Nuclear Facility Safety Basis and Safety Design Basis Documents

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SENSITIVE DOE-STD-1104-2014 December 2014 Superseding DOE-STD-1104-2009 DOE STANDARD REVIEW AND APPROVAL OF NUCLEAR FACILITY SAFETY BASIS AND SAFETY DESIGN BASIS DOCUMENTS U.S. Department of Energy AREA SAFT Washington, DC 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-STD-1104-2014 i FOREWORD 1. This Standard describes a framework and the criteria to be used for approval of (1) safety basis documents, as required by 10 Code of Federal Regulation

  9. Network architecture functional description and design

    SciTech Connect (OSTI)

    Stans, L.; Bencoe, M.; Brown, D.; Kelly, S.; Pierson, L.; Schaldach, C.

    1989-05-25

    This report provides a top level functional description and design for the development and implementation of the central network to support the next generation of SNL, Albuquerque supercomputer in a UNIX{reg sign} environment. It describes the network functions and provides an architecture and topology.

  10. NRC review of Electric Power Research Institute`s advanced light water reactor utility requirements document. Passive plant designs, chapters 2-13, project number 669

    SciTech Connect (OSTI)

    Not Available

    1994-08-01

    The Electric Power Research Institute (EPRI) is preparing a compendium of technical requirements, referred to as the {open_quotes}Advanced Light Water Reactor [ALWR] Utility Requirements Document{close_quotes}, that is acceptable to the design of an ALWR power plant. When completed, this document is intended to be a comprehensive statement of utility requirements for the design, construction, and performance of an ALWR power plant for the 1990s and beyond. The Requirements Document consists of three volumes. Volume I, {open_quotes}ALWR Policy and Summary of Top-Tier Requirements{close_quotes}, is a management-level synopsis of the Requirements Document, including the design objectives and philosophy, the overall physical configuration and features of a future nuclear plant design, and the steps necessary to take the proposed ALWR design criteria beyond the conceptual design state to a completed, functioning power plant. Volume II consists of 13 chapters and contains utility design requirements for an evolutionary nuclear power plant [approximately 1350 megawatts-electric (MWe)]. Volume III contains utility design requirements for nuclear plants for which passive features will be used in their designs (approximately 600 MWe). In April 1992, the staff of the Office of Nuclear Reactor Regulation, U.S. Nuclear Regulatory Commission, issued Volume 1 and Volume 2 (Parts 1 and 2) of its safety evaluation report (SER) to document the results of its review of Volumes 1 and 2 of the Requirements Document. Volume 1, {open_quotes}NRC Review of Electric Power Research Institute`s Advanced Light Water Reactor Utility Requirements Document - Program Summary{close_quotes}, provided a discussion of the overall purpose and scope of the Requirements Document, the background of the staff`s review, the review approach used by the staff, and a summary of the policy and technical issues raised by the staff during its review.

  11. Technical Support Document: Development of the Advanced Energy Design Guide for Small Hospitals and Healthcare Facilities--30% Guide

    SciTech Connect (OSTI)

    Bonnema, E.; Doebber, I.; Pless, S.; Torcellini, P.

    2010-03-01

    This Technical Support Document describes the process and methodology for the development of the Advanced Energy Design Guide for Small Hospitals and Healthcare Facilities.

  12. System specification/system design document comment review: Plutonium Stabilization and Packaging System. Notes of conference

    SciTech Connect (OSTI)

    1996-07-01

    A meeting was held between DOE personnel and the BNFL team to review the proposed resolutions to DOE comments on the initial issue of the system specification and system design document for the Plutonium Stabilization and Packaging System. The objectives of this project are to design, fabricate, install, and start up a glovebox system for the safe repackaging of plutonium oxide and metal, with a requirement of a 50-year storage period. The areas discussed at the meeting were: nitrogen in can; moisture instrumentation; glovebox atmosphere; can marking-bar coding; weld quality; NFPA-101 references; inner can swabbing; ultimate storage environment; throughput; convenience can screw-top design; furnace/trays; authorization basis; compactor safety; schedule for DOE review actions; fire protection; criticality safety; applicable standards; approach to MC and A; homogeneous oxide; resistance welder power; and tray overfill. Revised resolutions were drafted and are presented.

  13. Functional design criteria 241-AP-102 Flexible Receiver System

    SciTech Connect (OSTI)

    Roblyer, S.P.

    1995-02-16

    A mixer pump was installed in the 1.07 m (42-in.) riser of the central pump pit of tank 241-AP-102 to mitigate potential fluid separation particle sedimentation by mixing the tank`s contents. The mixer pump performed this function until failure. Its removal is now necessary to meet possible tank content removal commitments or other corrective actions. The proposed removal procedure requires a flexible receiver that will provide a barrier to contamination during removal and transfer of the pump to the mixer pump storage container. This document describes the functional design criteria of the flexible receiver. These criteria include the functional and performance requirements of the flexible receiver as a barrier to contamination during normal conditions and contingencies and the instrumentation requirements.

  14. Review and Approval of Nuclear Facility Safety Basis and Safety Design Basis Documents

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SENSITIVE DOE-STD-1104-2009 May 2009 Superseding DOE-STD-1104-96 DOE STANDARD REVIEW AND APPROVAL OF NUCLEAR FACILITY SAFETY BASIS AND SAFETY DESIGN BASIS DOCUMENTS U.S. Department of Energy AREA SAFT Washington, DC 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-STD-1104-2009 ii Available on the Department of Energy Technical Standards web page at http://www.hss.energy.gov/nuclearsafety/ns/techstds/ DOE-STD-1104-2009 iii CONTENTS FOREWORD

  15. Hardware design document for the Infrasound Prototype for a CTBT IMS station

    SciTech Connect (OSTI)

    Breding, D.R.; Kromer, R.P.; Whitaker, R.W.; Sandoval, T.

    1997-11-01

    The Hardware Design Document (HDD) describes the various hardware components used in the Comprehensive Test Ban Treaty (CTBT) Infrasound Prototype and their interrelationships. It divides the infrasound prototype into hardware configurations items (HWCIs). The HDD uses techniques such as block diagrams and parts lists to present this information. The level of detail provided in the following sections should be sufficient to allow potential users to procure and install the infrasound system. Infrasonic monitoring is a low cost, robust, and effective technology for detecting atmospheric explosions. Low frequencies from explosion signals propagate to long ranges (few thousand kilometers) where they can be detected with an array of sensors.

  16. De novo design of functional proteins: Toward artificial hydrogenases

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    De novo design of functional proteins: Toward artificial hydrogenases Authors: Faiella, M., Roy, A., Sommer, D., Ghirlanda, G. Title: De novo design of functional proteins: Toward ...

  17. Technical Support Document: The Development of the Advanced Energy Design Guide for Small Retail Buildings

    SciTech Connect (OSTI)

    Liu, Bing; Jarnagin, Ronald E.; Winiarski, David W.; Jiang, Wei; McBride, Merle F.; Crall, C.

    2006-09-30

    The Advanced Energy Design Guide for Small Retail Buildings (AEDG-SR) was developed by a partnership of organizations, including the American Society of Heating, Refrigerating and Air Conditioning Engineers (ASHRAE), the American Institute of Architects (AIA), the Illuminating Engineering Society of North America (IESNA), the United States Green Buildings Council (USGBC), and the Department of Energy (DOE). The guide is intended to offer recommendations to achieve 30% energy savings and thus to encourage steady progress towards net-zero energy buildings. The baseline level energy use was set at buildings built at the turn of the millennium, which are assumed to be based on ANSI/ASHRAE/IESNA Standard 90.1-1999, Energy Standard for Buildings Except Low-Rise Residential Buildings (refer to as the ?Standard? in this report). ASHRAE and its partners are engaged in the development of a series of guides for small commercial buildings, with the AEDG-SR being the second in the series. Previously the partnership developed the Advanced Energy Design Guide for Small Office Buildings: Achieving 30% Energy Savings Over ANSI/ASHRAE/IESNA Standard 90.1-1999, which was published in late 2004. The technical support document prepared by PNNL details how the energy analysis performed in support of the Guide and documents development of recommendation criteria.

  18. Project Management Policy & Guidance Documents | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Policy & Guidance Documents Project Management Policy & Guidance Documents << Return to Directives & Documents | Proceed to Publications & Documents >> Document Type Function

  19. Functional design criteria for standard hydrogen monitoring system portable platform

    SciTech Connect (OSTI)

    Schneider, T.C.

    1997-01-17

    Functional design description for a Standard-E cabinet arrangement Standard Hydrogen Monitoring System Portable Platform.

  20. Final safety analysis report for the Galileo Mission: Volume 1, Reference design document

    SciTech Connect (OSTI)

    Not Available

    1988-05-01

    The Galileo mission uses nuclear power sources called Radioisotope Thermoelectric Generators (RTGs) to provide the spacecraft's primary electrical power. Because these generators contain nuclear material, a Safety Analysis Report (SAR) is required. A preliminary SAR and an updated SAR were previously issued that provided an evolving status report on the safety analysis. As a result of the Challenger accident, the launch dates for both Galileo and Ulysses missions were later rescheduled for November 1989 and October 1990, respectively. The decision was made by agreement between the DOE and the NASA to have a revised safety evaluation and report (FSAR) prepared on the basis of these revised vehicle accidents and environments. The results of this latest revised safety evaluation are presented in this document (Galileo FSAR). Volume I, this document, provides the background design information required to understand the analyses presented in Volumes II and III. It contains descriptions of the RTGs, the Galileo spacecraft, the Space Shuttle, the Inertial Upper Stage (IUS), the trajectory and flight characteristics including flight contingency modes, and the launch site. There are two appendices in Volume I which provide detailed material properties for the RTG.

  1. Dynamic (G2) Model Design Document, 24590-WTP-MDD-PR-01-002, Rev. 12

    SciTech Connect (OSTI)

    Deng, Yueying; Kruger, Albert A.

    2013-12-16

    The Hanford Tank Waste Treatment and Immobilization Plant (WTP) Statement of Work (Department of Energy Contract DE-AC27-01RV14136, Section C) requires the contractor to develop and use process models for flowsheet analyses and pre-operational planning assessments. The Dynamic (G2) Flowsheet is a discrete-time process model that enables the project to evaluate impacts to throughput from eventdriven activities such as pumping, sampling, storage, recycle, separation, and chemical reactions. The model is developed by the Process Engineering (PE) department, and is based on the Flowsheet Bases, Assumptions, and Requirements Document (24590-WTP-RPT-PT-02-005), commonly called the BARD. The terminologies of Dynamic (G2) Flowsheet and Dynamic (G2) Model are interchangeable in this document. The foundation of this model is a dynamic material balance governed by prescribed initial conditions, boundary conditions, and operating logic. The dynamic material balance is achieved by tracking the storage and material flows within the plant as time increments. The initial conditions include a feed vector that represents the waste compositions and delivery sequence of the Tank Farm batches, and volumes and concentrations of solutions in process equipment before startup. The boundary conditions are the physical limits of the flowsheet design, such as piping, volumes, flowrates, operation efficiencies, and physical and chemical environments that impact separations, phase equilibriums, and reaction extents. The operating logic represents the rules and strategies of running the plant.

  2. Technical Support Document: Development of the Advanced Energy Design Guide for Large Hospitals - 50% Energy Savings

    SciTech Connect (OSTI)

    Bonnema, E.; Leach, M.; Pless, S.

    2013-06-01

    This Technical Support Document describes the process and methodology for the development of the Advanced Energy Design Guide for Large Hospitals: Achieving 50% Energy Savings Toward a Net Zero Energy Building (AEDG-LH) ASHRAE et al. (2011b). The AEDG-LH is intended to provide recommendations for achieving 50% whole-building energy savings in large hospitals over levels achieved by following Standard 90.1-2004. The AEDG-LH was created for a 'standard' mid- to large-size hospital, typically at least 100,000 ft2, but the strategies apply to all sizes and classifications of new construction hospital buildings. Its primary focus is new construction, but recommendations may be applicable to facilities undergoing total renovation, and in part to many other hospital renovation, addition, remodeling, and modernization projects (including changes to one or more systems in existing buildings).

  3. Computer code input for thermal hydraulic analysis of Multi-Function Waste Tank Facility Title II design

    SciTech Connect (OSTI)

    Cramer, E.R.

    1994-10-01

    The input files to the P/Thermal computer code are documented for the thermal hydraulic analysis of the Multi-Function Waste Tank Facility Title II design analysis.

  4. Safeguards Guidance Document for Designers of Commercial Nuclear Facilities: International Nuclear Safeguards Requirements and Practices For Uranium Enrichment Plants

    SciTech Connect (OSTI)

    Robert Bean; Casey Durst

    2009-10-01

    This report is the second in a series of guidelines on international safeguards requirements and practices, prepared expressly for the designers of nuclear facilities. The first document in this series is the description of generic international nuclear safeguards requirements pertaining to all types of facilities. These requirements should be understood and considered at the earliest stages of facility design as part of a new process called “Safeguards-by-Design.” This will help eliminate the costly retrofit of facilities that has occurred in the past to accommodate nuclear safeguards verification activities. The following summarizes the requirements for international nuclear safeguards implementation at enrichment plants, prepared under the Safeguards by Design project, and funded by the U.S. Department of Energy (DOE) National Nuclear Security Administration (NNSA), Office of NA-243. The purpose of this is to provide designers of nuclear facilities around the world with a simplified set of design requirements and the most common practices for meeting them. The foundation for these requirements is the international safeguards agreement between the country and the International Atomic Energy Agency (IAEA), pursuant to the Treaty on the Non-proliferation of Nuclear Weapons (NPT). Relevant safeguards requirements are also cited from the Safeguards Criteria for inspecting enrichment plants, found in the IAEA Safeguards Manual, Part SMC-8. IAEA definitions and terms are based on the IAEA Safeguards Glossary, published in 2002. The most current specification for safeguards measurement accuracy is found in the IAEA document STR-327, “International Target Values 2000 for Measurement Uncertainties in Safeguarding Nuclear Materials,” published in 2001. For this guide to be easier for the designer to use, the requirements have been restated in plainer language per expert interpretation using the source documents noted. The safeguards agreement is fundamentally a

  5. Document Details Document Number

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Document Details Document Number Date of Document Document Title/Description [Links below to each document] D195066340 Not listed. N/A REVISIONS IN STRATIGRAPHIC NOMENCLATURE OF COLUMBIA RIVER BASALT GROUP D196000240 Not listed. N/A EPA DENIAL OF LINER LEACHATE COLLECTION SYSTEM REQUIREMENTS D196005916 Not listed. N/A LATE CENOZOIC STRATIGRAPHY AND TECTONIC EVOLUTION WITHIN SUBSIDING BASIN SOUTH CENTRAL WASHINGTON D196025993 RHO-BWI-ST-14 N/A SUPRABASALT SEDIMENTS OF COLD CREEK SYNCLINE AREA

  6. NASA low power DIPS [Dynamic Isotope Power System] conceptual design requirements document

    SciTech Connect (OSTI)

    Johnson, G.; Determan, W.; Otting, W.

    1990-01-01

    This document describes the requirements for a low power (0.5--1.0 kwe) Dynamic Isotope Power System (DIPS) for interplanetary and space exploration missions using the Mariner Mark II spacecraft. The reference mission used to establish these requirements was the Cassini orbiter mission to Saturn. Requirements specific to two other missions (Outer Planet Orbiter/Probe and Comet Nucleus Sample Return) are also included. A list of references used to develop these requirements is provided. 17 refs., 2 figs., 2 tabs.

  7. Technical Support Document: Development of the Advanced Energy Design Guide for Small Hospitals and Healthcare Facilities--30% Guide

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6314 March 2010 Technical Support Document: Development of the Advanced Energy Design Guide for Small Hospitals and Healthcare Facilities-30% Guide Eric Bonnema, Ian Doebber, Shanti Pless, and Paul Torcellini National Renewable Energy Laboratory 1617 Cole Boulevard, Golden, Colorado 80401-3393 303-275-3000 * www.nrel.gov NREL is a national laboratory of the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Operated by the Alliance for Sustainable Energy, LLC Contract No.

  8. Functional design criteria for project W-252, phase II liquid effluent treatment and disposal. Revision 2

    SciTech Connect (OSTI)

    Hatch, C.E.

    1995-05-01

    This document is the Functional Design Criteria for Project W-252. Project W-252 provides the scope to provide BAT/AKART (best available technology...) to 200 Liquid Effluent Phase II streams (B-Plant). This revision (Rev. 2) incorporates a major descoping of the project. The descoping was done to reflect a combination of budget cutting measures allowed by a less stringent regulatory posture toward the Phase II streams

  9. COLLOQUIUM: Functional Capabilities and Design of the ITER EC...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MBG Auditorium, PPPL (284 cap.) COLLOQUIUM: Functional Capabilities and Design of the ITER EC H&CD System Dr. Mark Henderson ITER Organization A 24MW Electron Cyclotron (EC) system ...

  10. Kilowatt Reactor Using Stirling TechnologY (KRUSTY) Demonstration. CEDT Phase 1 Preliminary Design Documentation

    SciTech Connect (OSTI)

    Sanchez, Rene Gerardo; Hutchinson, Jesson D.; Mcclure, Patrick Ray; Myers, William L.

    2015-08-20

    The intent of the integral experiment request IER 299 (called KiloPower by NASA) is to assemble and evaluate the operational performance of a compact reactor configuration that closely resembles the flight unit to be used by NASA to execute a deep space exploration mission. The reactor design will include heat pipes coupled to Stirling engines to demonstrate how one can generate electricity when extracting energy from a “nuclear generated” heat source. This series of experiments is a larger scale follow up to the DUFF series of experiments1,2 that were performed using the Flat-Top assembly.

  11. Design criteria document, Fire Protection Task, K Basin Essential Systems Recovery, Project W-405

    SciTech Connect (OSTI)

    Johnson, B.H.

    1994-12-14

    The K Basin were constructed in the early 1950`s with a 20 year design life. The K Basins are currently in their third design life and are serving as a near term storage facility for irradiated N Reactor fuel until an interim fuel storage solution can be implemented. In April 1994, Project W-405, K Basin Essential Systems Recovery, was established to address (among other things) the immediate fire protection needs of the 100K Area. A Fire Barrier Evaluation was performed for the wall between the active and inactive areas of the 105KE and 105KW buildings. This evaluation concludes that the wall is capable of being upgraded to provide an equivalent level of fire resistance as a qualified barrier having a fire resistance rating of 2 hours. The Fire Protection Task is one of four separate Tasks included within the scope of Project W405, K Basin Essential systems Recovery. The other three Tasks are the Water Distribution System Task, the Electrical System Task, and the Maintenance Shop/Support Facility Task. The purpose of Project W-405`s Fire Protection Task is to correct Life Safety Code (NFPA 101) non-compliances and to provide fire protection features in Buildings 105KE, 105KW and 190KE that are essential for assuring the safe operation and storage of spent nuclear fuel at the 100K Area Facilities` Irradiated Fuel Storage Basins (K Basins).

  12. Center for the Computational Design of Functional Layered Materials (CCDM)

    Office of Science (SC) Website

    | U.S. DOE Office of Science (SC) the Computational Design of Functional Layered Materials (CCDM) Energy Frontier Research Centers (EFRCs) EFRCs Home Centers EFRC External Websites Research Science Highlights News & Events Publications History Contact BES Home Centers Center for the Computational Design of Functional Layered Materials (CCDM) Print Text Size: A A A FeedbackShare Page CCDM Header Director John Perdew Lead Institution Temple University Year Established 2014 Mission To

  13. SNF AGING SYSTEM DESCRIPTION DOCUMENT

    SciTech Connect (OSTI)

    L.L. Swanson

    2005-04-06

    The purpose of this system description document (SDD) is to establish requirements that drive the design of the spent nuclear fuel (SNF) aging system and associated bases, which will allow the design effort to proceed. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD follows the design with regard to the description of the system. The description provided in the SDD reflects the current results of the design process. Throughout this SDD, the term aging cask applies to vertical site-specific casks and to horizontal aging modules. The term overpack is a vertical site-specific cask that contains a dual-purpose canister (DPC) or a disposable canister. Functional and operational requirements applicable to this system were obtained from ''Project Functional and Operational Requirements'' (F&OR) (Curry 2004 [DIRS 170557]). Other requirements that support the design process were taken from documents such as ''Project Design Criteria Document'' (PDC) (BSC 2004 [DES 171599]), ''Site Fire Hazards Analyses'' (BSC 2005 [DIRS 172174]), and ''Nuclear Safety Design Bases for License Application'' (BSC 2005 [DIRS 171512]). The documents address requirements in the ''Project Requirements Document'' (PRD) (Canori and Leitner 2003 [DIRS 166275]). This SDD includes several appendices. Appendix A is a Glossary; Appendix B is a list of key system charts, diagrams, drawings, lists and additional supporting information; and Appendix C is a list of

  14. ELECTRICAL SUPPORT SYSTEM DESCRIPTION DOCUMENT

    SciTech Connect (OSTI)

    S. Roy

    2004-06-24

    The purpose of this revision of the System Design Description (SDD) is to establish requirements that drive the design of the electrical support system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience/users are design engineers. This type of SDD both ''leads'' and ''trails'' the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to electrical support systems are obtained from the ''Project Functional and Operational Requirements'' (F&OR) (Siddoway 2003). Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), and fire hazards analyses. The above-mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canon and Leitner 2003) requirements. This SDD contains several appendices that include supporting information. Appendix B lists key system charts, diagrams, drawings, and lists, and Appendix C includes a list of system procedures.

  15. Technical Support Document: Development of the Advanced Energy Design Guide for Medium to Big Box Retail Buildings - 50% Energy Savings

    SciTech Connect (OSTI)

    Bonnema, E.; Leach, M.; Pless, S.

    2013-06-01

    This Technical Support Document describes the process and methodology for the development of the Advanced Energy Design Guide for Medium to Big Box Retail Buildings: Achieving 50% Energy Savings Toward a Net Zero Energy Building (AEDG-MBBR) ASHRAE et al. (2011b). The AEDG-MBBR is intended to provide recommendations for achieving 50% whole-building energy savings in retail stores over levels achieved by following ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings (Standard 90.1-2004) (ASHRAE 2004b). The AEDG-MBBR was developed in collaboration with the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), the American Institute of Architects (AIA), the Illuminating Engineering Society of North America (IES), the U.S. Green Building Council (USGBC), and the U.S. Department of Energy.

  16. Technical Support Document: Development of the Advanced Energy Design Guide for Medium to Big Box Retail Buildings - 50% Energy Savings

    SciTech Connect (OSTI)

    Bonnema, Eric; Leach, Matt; Pless, Shanti

    2013-06-05

    This Technical Support Document describes the process and methodology for the development of the Advanced Energy Design Guide for Medium to Big Box Retail Buildings: Achieving 50% Energy Savings Toward a Net Zero Energy Building (AEDG-MBBR) ASHRAE et al. (2011b). The AEDG-MBBR is intended to provide recommendations for achieving 50% whole-building energy savings in retail stores over levels achieved by following ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings (Standard 90.1-2004) (ASHRAE 2004b). The AEDG-MBBR was developed in collaboration with the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), the American Institute of Architects (AIA), the Illuminating Engineering Society of North America (IES), the U.S. Green Building Council (USGBC), and the U.S. Department of Energy.

  17. Multi-Function Waste Tank Facility thermal hydraulic analysis for Title II design

    SciTech Connect (OSTI)

    Cramer, E.R.

    1994-11-10

    The purpose of this work was to provide the thermal hydraulic analysis for the Multi-Function Waste Tank Facility (MWTF) Title II design. Temperature distributions throughout the tank structure were calculated for subsequent use in the structural analysis and in the safety evaluation. Calculated temperatures of critical areas were compared to design allowables. Expected operating parameters were calculated for use in the ventilation system design and in the environmental impact documentation. The design requirements were obtained from the MWTF Functional Design Criteria (FDC). The most restrictive temperature limit given in the FDC is the 200 limit for the haunch and dome steel and concrete. The temperature limit for the rest of the primary and secondary tanks and concrete base mat and supporting pad is 250 F. Also, the waste should not be allowed to boil. The tank geometry was taken from ICF Kaiser Engineers Hanford drawing ES-W236A-Z1, Revision 1, included here in Appendix B. Heat removal rates by evaporation from the waste surface were obtained from experimental data. It is concluded that the MWTF tank cooling system will meet the design temperature limits for the design heat load of 700,000 Btu/h, even if cooling flow is lost to the annulus region, and temperatures change very slowly during transients due to the high heat capacity of the tank structure and the waste. Accordingly, transients will not be a significant operational problem from the viewpoint of meeting the specified temperature limits.

  18. Document Reviews

    Broader source: Energy.gov [DOE]

    The Office of Document Reviews, within the Office of Health, Safety and Security information and document declassification efforts promote the release of information needed by an informed citizenry...

  19. Elementary tetrahelical protein design for diverse oxidoreductase...

    Office of Scientific and Technical Information (OSTI)

    Elementary tetrahelical protein design for diverse oxidoreductase functions Citation Details In-Document Search Title: Elementary tetrahelical protein design for diverse...

  20. Other Documents

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    since 2009 5 U.S.C. § 552 10 CFR 1004 Other Documents Transuranic Waste Defense Determination Approval Form

  1. WIPP Documents

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Large file size alert This symbol means the document may be a large file size. Environmental Monitoring Documents about environmental monitoring at WIPP, including annual site environmental reports Environmental Protection Agency Certification Documents about WIPP's EPA certification Federal Regulations Standards and compliance criteria for WIPP Hazardous Waste Facility Permit Documents related to the state of New Mexico's oversight of WIPP under the authority of the Resource Conservation and

  2. Functional design criteria for Project W-252, Phase II Liquid Effluent Treatment and Disposal: Revision 1

    SciTech Connect (OSTI)

    Hatch, C.E.

    1994-11-10

    This document provides the functional design criteria required for the Phase 2 Liquid Effluent Treatment and Disposal Project, Project W-252. Project W-252 shall provide new facilities and existing facility modifications required to implement Best Available Technology/All Known, Available, and Reasonable Methods of Prevention, Control, and Treatment (BAT/AKART) for the 200 East Phase II Liquid Effluent Streams. The project will also provide a 200 East Area Phase II Effluent Collection System (PTECS) for connection to a disposal system for relevant effluent streams to which BAT/AKART has been applied. Liquid wastestreams generated in the 200 East Area are currently discharged to the soil column. Included in these wastestreams are cooling water, steam condensate, raw water, and sanitary wastewaters. It is the policy of the DOE that the use of soil columns to treat and retain radionuclides and nonradioactive contaminants be discontinued at the earliest practical time in favor of wastewater treatment and waste minimization. In 1989, the DOE entered into an interagency agreement with Ecology and EPA. This agreement is referred to as the Hanford Federal Facility Agreement and Consent Order (Tri-Party Agreement). Project W-252 is one of the projects required to achieve the milestones set forth in the Tri-Party Agreement. One of the milestones requires BAT/AKART implementation for Phase II streams by October 1997. This Functional Design Criteria (FDC) document provides the technical baseline required to initiate Project W-252 to meet the Tri-Party Agreement milestone for the application of BAT/AKART to the Phase II effluents.

  3. Interfacial Properties and Design of Functional Energy Materials

    SciTech Connect (OSTI)

    Sumpter, Bobby G [ORNL; Liang, Liangbo [ORNL; Nicolai, Adrien [Rensselaer Polytechnic Institute (RPI); Meunier, V. [Rensselaer Polytechnic Institute (RPI)

    2014-01-01

    The vital importance of energy to society continues to demand a relentless pursuit of energy responsive materials that can bridge fundamental chemical structures at the molecular level and achieve improved functionality, such as efficient energy conversion/storage/transmission, over multiple length scales. This demand can potentially be realized by harnessing the power of self-assembly a spontaneous process where molecules or much larger entities form ordered aggregates as a consequence of predominately non-covalent (weak) interactions. Self-assembly is the key to bottom-up design of molecular devices, because the nearly atomic-level control is very difficult to realize in a top-down, e.g., lithographic approach. However, while function (e.g., charge mobility) in simple systems such as single crystals can often be predicted, predicting the function of the great variety of self-assembled molecular architectures is complicated by the lack of understanding and control over nanoscale interactions, mesoscale architectures, and macroscale (long-range) order. To establish a foundation toward delivering practical solutions, it is critical to develop an understanding of the chemical and physical mechanisms responsible for the self-assembly of molecular and hybrid materials on various substrates. Typically molecular self-assembly involves poorly understood non-covalent intermolecular and substrate-molecule interactions compounded by local and/or collective influences from the substrate atomic lattice (symmetry and/or topological features) and electronic structure. Thus, progress towards unraveling the underlying physicochemical processes that control the structure and macroscopic physical, mechanical, electrical, and transport properties of materials increasingly requires tight integration of theory, modeling and simulation with precision synthesis, advanced experimental characterization, and device measurements. In this mode, theory and simulation can greatly accelerate the

  4. Scanned Document

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Narrows Dam - Power Section Intake Trash Racks Location: Steel trash racks located at the ... documenting the condition of the rusted trash racks and adjacent corroded steel guides. ...

  5. Document Flowdown Tool

    SciTech Connect (OSTI)

    2010-12-31

    DFTool performs the following: ? A tool to conduct, capture, document, and manage a systematic review and flowdown of contractual requirements/documents to the site, facility, and project-level implementing documents. ? Ability to alert/email document owners to impending changes/updates and impacts to upper-level linked documents. ? Custom ability to generate reports and/or include custom functionalities based on other needs or consideration for site use. ? Ability to be accessed by all personnel (particularly document owners). ? Shows both document flow-up and flow-down. ? Provides visibility where links/flowdown does not currently exist or is incorrect so it can be changed/updated (no visibility currently exists). ? Ability to capture requirements and ultimately link to an existing/proven requirements-based commitment tracking system which can be used (electively) at the facility/organizational-level

  6. Document Flowdown Tool

    Energy Science and Technology Software Center (OSTI)

    2010-12-31

    DFTool performs the following: • A tool to conduct, capture, document, and manage a systematic review and flowdown of contractual requirements/documents to the site, facility, and project-level implementing documents. • Ability to alert/email document owners to impending changes/updates and impacts to upper-level linked documents. • Custom ability to generate reports and/or include custom functionalities based on other needs or consideration for site use. • Ability to be accessed by all personnel (particularly document owners). •more » Shows both document flow-up and flow-down. • Provides visibility where links/flowdown does not currently exist or is incorrect so it can be changed/updated (no visibility currently exists). • Ability to capture requirements and ultimately link to an existing/proven requirements-based commitment tracking system which can be used (electively) at the facility/organizational-level« less

  7. Technical Support Document: Development of the Advanced Energy Design Guide for Medium Box Retail -- 50% Energy Savings

    SciTech Connect (OSTI)

    Hale, E. T.; Macumber, D. L.; Long, N. L.; Griffith, B. T.; Benne, K. S.; Pless, S. D.; Torcellini, P. A.

    2008-09-01

    This report provides recommendations that architects, designers, contractors, developers, owners, and lessees of medium box retail buildings can use to achieve whole-building energy savings of at least 50% over ASHRAE Standard 90.1-2004. The recommendations are given by climate zone and address building envelope, fenestration, lighting systems, HVAC systems, building automation and controls, outside air treatment, service water heating, plug loads, and photovoltaic systems. The report presents several paths to 50% savings, which correspond to different levels of integrated design. These are recommendations only, and are not part of a code or standard. The recommendations are not exhaustive, but we do try to emphasize the benefits of integrated building design, that is, a design approach that analyzes a building as a whole system, rather than as a disconnected collection of individually engineered subsystems.

  8. Sections prepared for inclusion in an IAEA technical document handbook on Designing and Implementing a Physical Protection System

    SciTech Connect (OSTI)

    Snell, Mark K.

    2015-11-01

    Two major sections were drafted (each with several subsections) for the IAEA dealing with designing and implementing a Physical Protection System (PPS). Areas addressed were Search Systems and the evaluation of PPS effectiveness.

  9. Structure-Based Design of Functional Amyloid Materials

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Li, Dan; Jones, Eric M.; Sawaya, Michael R.; Furukawa, Hiroyasu; Luo, Fang; Ivanova, Magdalena; Sievers, Stuart A.; Wang, Wenyuan; Yaghi, Omar M.; Liu, Cong; et al

    2014-12-04

    We report that amyloid fibers, once exclusively associated with disease, are acquiring utility as a class of biological nanomaterials. We introduce a method that utilizes the atomic structures of amyloid peptides, to design materials with versatile applications. As a model application, we designed amyloid fibers capable of capturing carbon dioxide from flue gas, to address the global problem of excess anthropogenic carbon dioxide. By measuring dynamic separation of carbon dioxide from nitrogen, we show that fibers with designed amino acid sequences double the carbon dioxide binding capacity of the previously reported fiber formed by VQIVYK from Tau protein. In amore » second application, we designed fibers that facilitate retroviral gene transfer. Finally, by measuring lentiviral transduction, we show that designed fibers exceed the efficiency of polybrene, a commonly used enhancer of transduction. The same procedures can be adapted to the design of countless other amyloid materials with a variety of properties and uses.« less

  10. Structure-Based Design of Functional Amyloid Materials

    SciTech Connect (OSTI)

    Li, Dan; Jones, Eric M.; Sawaya, Michael R.; Furukawa, Hiroyasu; Luo, Fang; Ivanova, Magdalena; Sievers, Stuart A.; Wang, Wenyuan; Yaghi, Omar M.; Liu, Cong; Eisenberg, David S.

    2014-12-04

    We report that amyloid fibers, once exclusively associated with disease, are acquiring utility as a class of biological nanomaterials. We introduce a method that utilizes the atomic structures of amyloid peptides, to design materials with versatile applications. As a model application, we designed amyloid fibers capable of capturing carbon dioxide from flue gas, to address the global problem of excess anthropogenic carbon dioxide. By measuring dynamic separation of carbon dioxide from nitrogen, we show that fibers with designed amino acid sequences double the carbon dioxide binding capacity of the previously reported fiber formed by VQIVYK from Tau protein. In a second application, we designed fibers that facilitate retroviral gene transfer. Finally, by measuring lentiviral transduction, we show that designed fibers exceed the efficiency of polybrene, a commonly used enhancer of transduction. The same procedures can be adapted to the design of countless other amyloid materials with a variety of properties and uses.

  11. Untitled Document

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    For questions on the Environmental Assessment for Conducting Astrophysics and Other Basic Science Experiments at the WIPP Site, email Harold.Johnson@ or call (505) 234-7349. Environmental Assessment for Conducting Astrophysics and Other Basic Science Experiments at the WIPP Site Final - January, 2001 This document has been provided to you in PDF format. Please install Adobe Acrobat Reader before accessing these documents. Cover Sheet, Table of Contents, List of Tables, List of Figures, and

  12. Document Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 Document Information Document # FOIA-2009-0054 7 Revision Title FREEDOM OF INFORMATION ACT REQUEST (FOI 2009-0054) Date 09/02/2009 Originator RIEHLE DC Originator Co. [LOE-RL Recipient JARVIS R Recipient Co. HEART OF __________AMERICA NW References Keywords OCE, FOIA, SENSITIVE, PRIVATE CITIZEN Projects Other Inf ormation___________________________ WHC-SD-W025-AP-001, Rev. 2 1 1.0 INTRODUCTION 2 3 4 This response action plan (RAP) has been prepared for the Low-Level 5 Burial Grounds, Trenches

  13. Document Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SECTION 5 of 5 Document Information Document # FOIA2011-01376 Revision Title FREEDOM OF INFORMATION ACT REQUEST (FOI 2011-01 376) [SEC. 5 OF 5] Date 07/26/2011 Originator RIEHLE DC Originator Co. DOE-RL Recipient O'BRIEN L Recipient Co. HOA References 4, WRPI -SV-1 706, 0031161, WRPI -SV-1 603, 2404-WB, 2404-WC, 5, SW-040-043, W-040-0439 6, EM-RL- PHMC-SOLIDWASTE-2008-0007, EM-RL-PHMC- SOLI DWASTE-2010-0003, WRAP-RP-1 1-03 Keywords OCE, FOIA, SENSITIVE Projects Other Information Attachment V

  14. Document Title

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Services » Document Library Document Library August 31, 2016 Consent-Based Siting Summary of Public Input Meeting Consent-Based Siting Summary of Public Input Meeting August 16, 2016 NEAC CHARGE LETTERS August 8, 2016 Consent-Based Siting Meeting with the Town of Wiscasset, Maine (June 3, 2016) Consent-Based Siting Meeting with the Town of Wiscasset, Maine (June 3, 2016) July 19, 2016 Excess Uranium Management On July 19, 2016, the Department issued a Request for Information on the effects of

  15. Microsoft Word - Document2

    Buildings Energy Data Book [EERE]

    09 D I S C L A I M E R This document was designed for the internal use of the United States Department of Energy. This document will be occasionally updated and, therefore, this copy may not reflect the most current version. This document was prepared as account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or

  16. First principles materials design of novel functional oxides

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Cooper, Valentino R.; Voas, Brian K.; Bridges, Craig A.; Morris, James R.; Beckman, Scott P.

    2016-05-31

    We review our efforts to develop and implement robust computational approaches for exploring phase stability to facilitate the prediction-to-synthesis process of novel functional oxides. These efforts focus on a synergy between (i) electronic structure calculations for properties predictions, (ii) phenomenological/empirical methods for examining phase stability as related to both phase segregation and temperature-dependent transitions and (iii) experimental validation through synthesis and characterization. We illustrate this philosophy by examining an inaugural study that seeks to discover novel functional oxides with high piezoelectric responses. Lastly, our results show progress towards developing a framework through which solid solutions can be studied to predictmore » materials with enhanced properties that can be synthesized and remain active under device relevant conditions.« less

  17. Functional design criteria W-367, 222-S ancillary equipment addition

    SciTech Connect (OSTI)

    McVey, C.B.

    1995-02-21

    This paper reviews the designs and performance of tubular solid oxide fuel cells (SOFCs). A large number of tubular cells of the porous support tube type have been electrically tested, some to times over 50,000 hours; these cells have shown excellent performance and performance stability. Since 1984, successfully larger electrical generators utilizing these cells have been built and operated; a 20 kW integrated SOFC system operated for 7064 hours during 1993-1994. Results of development efforts to reduce cost and increase power output of tubular cells by eliminating porous support tube and increasing active length are described, and plans to utilize such air electrode supported cells in future SOFC systems are discussed.

  18. Functional Design Criteria plutonium stabilization and handling (PUSH) project W-460

    SciTech Connect (OSTI)

    NELSON, D.W.

    1999-09-02

    This Functional Design Criteria (FDC) contains information to guide the design of the Stabilization and Packaging Equipment necessary to oxidize and package the remaining plutonium-bearing Special Nuclear Materials (SNM) currently in the Plutonium Finishing Plant (PFP) inventory. The FDC also guides the design of vault modifications to allow storage of 3013 packages of stabilized SNM for up to 50 years.

  19. Untitled Document

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... to emplacement of these wastes at WIPP in consideration of the current baseline design. ... Isolation Pilot Plant Transuranic Waste Baseline Inventory Report (WTWBIR), which ...

  20. Document1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PREDICTING DESIGN WIND TURBINE LOADS FROM LIMITED DATA: COMPARING RANDOM PROCESS AND RANDOM PEAK MODELS LeRoy M. Fitzwater And Steven R. Winterstein Department of Civil &...

  1. AFFECTED DOCUMENT

    Office of Legacy Management (LM)

    ADMIN RCD _ COMM REF _ RESPONSE TRACKING INFORMAnON I lOWED BY: (ORG) I TARGET DATE I I I CLOSING CCN COMPL. DATE I I CLOSING REF I I lOWED BY: (ORG) I I I I I TARGET DATE I CLOSING CCN COMPL DATE CLOSING REF TECHNICAL SERVICES DIVISION (TSD) BACKFIT (Documents dated prior to 1 November 1988) FUSRAP COMMUNICATIONS DISTRIBUTION DOEIORO TECHNICAL SERVICES DIVISION (CE-53) BECHTEL NATIONAl.. INC. - JOB 14501 AI$Wl E.e... COMM DATE b~5i=-'/T-'-I'''' ADDR CODE I I I I CLOSES CCN WBS 1/~ .. :2 O~

  2. Ehron Documents

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ehron Documents 1993 S-F-1325.12 CORRESPONDENCE CONTROL FORM (11-90) OFFICE OF THE EXECLTIVE SECRETARIAT ACTIVITY ADD DO NOT DETACH FROM ORIGINAL CORRESPONDENCE 01/19/93 10:17 SOURCE CODE pM PUBLIC MAIL SPEC INT: _ CONTROL N( S93-000578 DATE CORR: 01/13/93 DATERECD: 01/19/93 DATECNTRL: 01/19/93 -DATE DUE: LETTER: MEMO: TWX: _OTHER: MOTION TO:SECY: X DEPSEC: UN SEC: OTHER: ROM:FLOWERS,G PATRICK TX O REMARKS: ENRON CORP. UB J : LEGAL -=--_- LITIGATION FOR USE fY ACT N OFFICE ONLY MOTION FOR LEAVE

  3. NEPA Documentation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Note for: Cynthia Quarterman Keith Harper From: Carol Borgstrom Subject: NEPA Documentation Date: December 3, 2008 Attached, per your request, are two lists: (1) DOE environmental assessments (EAs) issued since 12/1/2006 and (2) DOE environmental impact statements (EISs) issued since 12/1/2006. Also, per your request, is a copy of a general NEPA briefing provided to the Acting Deputy Secretary in May 2008. Please let me know if you have any further questions (carol.borgstrom @hq.doe.gov;

  4. Enron Documents

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    f Enron Documents 1994 U.S. DEPARTMENT OF ENERGY 13S. 12 CORRESPONDENCE CONTROL FORM 1) OFFICE OF THE EXECUTIVE SECRETARIAT 8CTIVITY ADD DO NOT DETACH FROM ORIGINAL CORRESPONDENCE 0/03/Y4 10: O0 5OURCECODE PM PUBLIC MAIL :?EC INT: CONTROL NO: ES94-012853 ,ATE CORR: 04/25/94 DATE RECD: 05/02/94 DATE CNTRL: 05/03/94 DATE DUE: NONE :TTER: X MEMO: TWX: _ OTHER: TO: SECY: X DEP SEC: _ UN SEC: OTHER: )M:LAY,KENNETH L \ TX O REMARKS: RELATES TO ES94-009882. i ENRON CORP. J: PUBLIC INFORMATION NATIONAL

  5. Enron Documents

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6 ,. OFC OU.S. DEPARTMENT OF ENERGY OFFICE OF THE EXECUTIVE SECRETARIAT CORRESPONDENCE CONTROL TICKET IMPORTANT ES NUMBER:- ES96-000274 EXTERNAL kTE OF DOC: 12/28/95 REC'D: 01/04/96 CONTROLLED: 01/04/96 DUE: 01/26/96 FROM: I HAVE A DREAM NOTE REA: SUBJECT INFORMS SECRETARY THAT ENRON SUMMARY: GORP HAS MADE A CONTRIBUTION TO "I HAVE A DREAM - HOUSTON" IN THE SECRETARY HONOR SOURCE: PUBLIC MAIL DOCUMENT TYPE: LETTER ADDRESSED TO: SECRETARY FOR SIGNATURE OF: SECRETARY ACTION TO: OFFICE OF

  6. SSC Safety Review Document

    SciTech Connect (OSTI)

    Toohig, T.E.

    1988-11-01

    The safety strategy of the Superconducting Super Collider (SSC) Central Design Group (CDG) is to mitigate potential hazards to personnel, as far as possible, through appropriate measures in the design and engineering of the facility. The Safety Review Document identifies, on the basis of the Conceptual Design Report (CDR) and related studies, potential hazards inherent in the SSC project independent of its site. Mitigative measures in the design of facilities and in the structuring of laboratory operations are described for each of the hazards identified.

  7. ARM - Conference Documents

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govPublicationsConference Documents Publications Journal Articles Conference Documents Program Documents Technical Reports Publications Database Public Information Materials Image...

  8. Untitled Document

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Many high performance distributed applications use only a small fraction of their available bandwidth. A common cause of this problem is not a flaw in the application design, but rather improperly tuned net- work settings. Proper tuning techniques, such as set- ting the correct TCP buffers and using parallel streams, are well known in the networking commu- nity, but outside the networking community they are infrequently applied. In this paper, we describe a service that makes the task of network

  9. Design acceptance summary report for the new generation transfer pump (NGTP)

    SciTech Connect (OSTI)

    IRONS, J.

    1999-10-27

    This report documents design review of the New Generation Transfer Pump versus the functions and requirements of the SY-101 Rapid Mitigation Project. Previously unpublished documentation for the pump is included in support of the design.

  10. Design review plan for Multi-Function Waste Tank Facility (Project W-236A)

    SciTech Connect (OSTI)

    Renfro, G.G.

    1994-12-20

    This plan describes how the Multi-Function Waste Tank Facility (MWTF) Project conducts reviews of design media; describes actions required by Project participants; and provides the methodology to ensure that the design is complete, meets the technical baseline of the Project, is operable and maintainable, and is constructable. Project W-236A is an integrated project wherein the relationship between the operating contractor and architect-engineer is somewhat different than that of a conventional project. Working together, Westinghouse Hanford Company (WHC) and ICF Karser Hanford (ICF KH) have developed a relationship whereby ICF KH performs extensive design reviews and design verification. WHC actively participates in over-the-shoulder reviews during design development, performs a final review of the completed design, and conducts a formal design review of the Safety Class I, ASME boiler and Pressure Vessel Code items in accordance with WHC-CM-6-1, Standard Engineering Practices.

  11. Reference Documents | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reference Documents Reference Documents The following are reference documents utilized by CNS staff to perform its functions. Understanding Process Plant Schedule Slippage and Startup Costs A Review of Cost Estimation in New Technologies - Implications for Energy Process Plants Understanding Cost Growth and Performance Shortfalls in Pioneer Process Plants Pioneer Plants Study User's Manual The Formation of Pioneer Plant Projects in Chemical Processing Firms Industry Information Practices and the

  12. Functional design criteria, Project W-211, Initial Tank Retrieval Systems. Revision 1

    SciTech Connect (OSTI)

    Rieck, C.A.

    1995-02-07

    This document provides the technical baseline for retrieval of waste from ten double-shell tanks in the SY, AN, AP, AW, AY, and AZ tank farms. In order to retrieve waste from these tanks, systems are needed to mix the sludge with the supernate and pump the waste mixture from the tank. For 101-SY, the existing mitigation pump will be used to mix the waste and Project W-211 will provide for waste removal. The retrieval scope for the other nine tanks includes both the waste mixing and removal functions.

  13. Renewable Fuels Module - NEMS Documentation

    Reports and Publications (EIA)

    2014-01-01

    This report documents the objectives, analytical approach, and design of the National Energy Modeling System (NEMS) Renewable Fuels Module (RFM) as it relates to the production of the Annual Energy Outlook forecasts.

  14. Characterization of objective-function spaces in optimal design of experiments

    SciTech Connect (OSTI)

    Crary, S.

    1994-12-31

    I present a systematic study of the objective-function spaces for finding exact I-optimal designs of experiments on continuous cuboidal spaces for multivariate second order models. The study looked at the number of equally good {open_quotes}global{close_quotes} minima and the aggregate hyper-volume of their basins of attraction, the number of local minima and the hyper-volumes of their basins, and the frequency with which the putatively optimal designs possessed a continuous symmetry or a reflection symmetry. This information can be used to speed search algorithms for optimal designs. For example, reflection symmetries can be identified early in a search, and the dimension of the search space significantly reduced. Our software pro gram I-OPT, which is available via anonymous ftp, uses a variety of application-specific speed-ups to find I-, D-, A-, and composite-optimal designs for a wide class of linear statistical model functions.

  15. ARM - Data Documentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Documentation Policies, Plans, Descriptions Data Documentation Home Data Sharing and Distribution Policy Data Management and Documentation Plan Data Product Registration and ...

  16. Document creation, linking, and maintenance system

    DOE Patents [OSTI]

    Claghorn, Ronald

    2011-02-15

    A document creation and citation system designed to maintain a database of reference documents. The content of a selected document may be automatically scanned and indexed by the system. The selected documents may also be manually indexed by a user prior to the upload. The indexed documents may be uploaded and stored within a database for later use. The system allows a user to generate new documents by selecting content within the reference documents stored within the database and inserting the selected content into a new document. The system allows the user to customize and augment the content of the new document. The system also generates citations to the selected content retrieved from the reference documents. The citations may be inserted into the new document in the appropriate location and format, as directed by the user. The new document may be uploaded into the database and included with the other reference documents. The system also maintains the database of reference documents so that when changes are made to a reference document, the author of a document referencing the changed document will be alerted to make appropriate changes to his document. The system also allows visual comparison of documents so that the user may see differences in the text of the documents.

  17. Document | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Document Document Extracted Pages Document (52.04 KB) More Documents & Publications ADR Policy Federal Register Microsoft Word - ADR Revised Policy82508Reformatted.doc 2009 ECR FINAL REPORT 2010

  18. CANISTER HANDLING FACILITY DESCRIPTION DOCUMENT

    SciTech Connect (OSTI)

    J.F. Beesley

    2005-04-21

    The purpose of this facility description document (FDD) is to establish requirements and associated bases that drive the design of the Canister Handling Facility (CHF), which will allow the design effort to proceed to license application. This FDD will be revised at strategic points as the design matures. This FDD identifies the requirements and describes the facility design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This FDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This FDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the facility. Knowledge of these requirements is essential in performing the design process. The FDD follows the design with regard to the description of the facility. The description provided in this FDD reflects the current results of the design process.

  19. HEPA Filter Differential Pressure Fan Interlock System Functional Requirements and Technical Design Criteria

    SciTech Connect (OSTI)

    TUCK, J.A.

    2000-05-11

    Double-shell tanks (DSTs) and Double Contained Receiver Tanks (DCRTs) are actively ventilated, along with certain single-shell tanks (SSTs) and other RPP facilities. The exhaust air stream on a typical primary ventilation system is drawn through two stages of high-efficiency particulate air (HEPA) filtration to ensure confinement of airborne radioactive materials. Active ventilation exhaust stacks require a stack CAM interlock to detect releases from postulated accidents, and to shut down the exhaust fan when high radiation levels are detected in the stack airstream. The stack CAM interlock is credited as a mitigating control to stop continued unfiltered radiological and toxicological discharges from the stack, which may result from an accident involving failure of a HEPA filter. This document defines the initial technical design baseline for a HEPA filter AP fan interlock system.

  20. QA role in advanced energy activities: Reductionism, emergence, and functionalism; presuppositions in designing internal QA audits

    SciTech Connect (OSTI)

    Bodnarczuk, M.

    1988-06-01

    After a brief overview of the mission of Fermilab, this paper explores some of the problems associated with designing internal QA audits. The paper begins with several examples of how audits should not be designed, then goes on to analyze two types of presuppositions about organizational structure (reductionism and emergence) that can be misleading and skew the data sample if folded too heavily into the checklist. A third type of presupposition (functionalism), is proposed as a viable way of achieving a more well-rounded measure of the performance of an organization, i.e. its effectiveness, not just compliance.

  1. WIPP Documents - All documents by number

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Note: Documents that do not have document numbers are not included in this listing. Large file size alert This symbol means the document may be a large file size. All documents by number Common document prefixes DOE/CAO DOE/TRU DOE/CBFO DOE/WIPP DOE/EA NM DOE/EIS Other DOE/CAO Back to top DOE/CAO 95-1095, Oct. 1995 Remote Handled Transuranic Waste Study This study was conducted to satisfy the requirements defined by the WIPP Land Withdrawal Act and considered by DOE to be a prudent exercise in

  2. Decommissioning Documents | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Decommissioning Documents PDF icon Decommissioning Documents More Documents & Publications Decommissioning Benchmarking Study Final Report Decommissioning Handbook ...

  3. End-to-end automated microfluidic platform for synthetic biology: from design to functional analysis

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Linshiz, Gregory; Jensen, Erik; Stawski, Nina; Bi, Changhao; Elsbree, Nick; Jiao, Hong; Kim, Jungkyu; Mathies, Richard; Keasling, Jay D.; Hillson, Nathan J.

    2016-02-02

    Synthetic biology aims to engineer biological systems for desired behaviors. The construction of these systems can be complex, often requiring genetic reprogramming, extensive de novo DNA synthesis, and functional screening. Here, we present a programmable, multipurpose microfluidic platform and associated software and apply the platform to major steps of the synthetic biology research cycle: design, construction, testing, and analysis. We show the platform’s capabilities for multiple automated DNA assembly methods, including a new method for Isothermal Hierarchical DNA Construction, and for Escherichia coli and Saccharomyces cerevisiae transformation. The platform enables the automated control of cellular growth, gene expression induction, andmore » proteogenic and metabolic output analysis. Finally, taken together, we demonstrate the microfluidic platform’s potential to provide end-to-end solutions for synthetic biology research, from design to functional analysis.« less

  4. Light Duty Utility Arm interface control document plan

    SciTech Connect (OSTI)

    Engstrom, J.W.

    1994-12-27

    This document describes the interface control documents that will be used to identify and control interface features throughout all phases of the Light Duty Utility Arm (LDUA) development and design. After the system is built, delivered and installed in the Cold Test Facility and later at the tank farm, the Interface Control Documents can be used in maintaining the configuration control process. The Interface Control Document will consist of Interface Control Drawings and a data base directly tied to the Interface Control Drawings. The data base can be used as an index to conveniently find interface information. Design drawings and other text documents that contain interface information will appear in the database. The Interface Control Drawings will be used to document and control the data and information that define the interface boundaries between systems, subsystems and equipment. Also, the interface boundaries will define the areas of responsibility for systems and subsystems. The drawing will delineate and identify all the physical and functional interfaces that required coordination to establish and maintain compatibility between the co-functioning equipment, computer software, and the tank farm facilities. An appendix contains the Engineering interface control database system riser manual.

  5. Chemical Industry R&D Roadmap for Nanomaterials By Design. From Fundamentals to Function

    SciTech Connect (OSTI)

    none,

    2003-12-01

    Vision2020 agreed to join NNI and the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy (DOE/EERE) in sponsoring the "Nanomaterials and the Chemical Industry Roadmap Workshop" on September 30-October 2, 2002. This roadmap, Chemical Industry R&D Roadmap for Nanomaterials By Design: From Fundamentals to Function, is based on the scientific priorities expressed by workshop participants from the chemical industry, universities, and government laboratories.

  6. EERE Template for Microsoft Word Document Standard Cover and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Template for Microsoft Word Document Standard Cover and Second Page EERE Template for Microsoft Word Document Standard Cover and Second Page This template was designed for print ...

  7. TMACS version description document

    SciTech Connect (OSTI)

    GLASSCOCK, J.A.

    1999-05-13

    This document updates the Version Description Document with the changes incorporated in the Revision 11.0 software installation on the Tank Monitor and Control System (TMACS).

  8. Documents - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    regarding Hanford's previous mission of plutonium production. Posting every document dating back to 1943 on this website would be unrealistic. However, certain documents are...

  9. INCOMING DOCUMENT CONTROL FORM DOCUMENT DESCRIPTION ORGANIZATIO

    Office of Legacy Management (LM)

    INCOMING DOCUMENT CONTROL FORM DOCUMENT DESCRIPTION ORGANIZATIO )ATE COMPLETED: ACTION NUMBER: I ! I I DOCUMENT CONTROL DATE INITIALS DATA BASE: ACTION LOG: FILED: To : Doug Tonkay, OTS Decen From: MIchele Landis, dRW Subject: Draft report ~ Result= of the Radiologic; Former Ore Storage Site, Palmerton, Pennsylvania Attached is one copy of the draft report. PIE provide your comments to me by January 16, 1990. tlichele Landis ,9, 1989 "ey at the review and Results of the Radiological SJrvey

  10. Preparation of Documented Safety Analysis for Decommissioning...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... for the purpose of establishing functional and performance requirements for safety ... and long-term stewardship. DOE O 430.1B, Attachment 3 Documented Safety Analysis (DSA). ...

  11. Document | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Document Document Extracted Pages Document (64.65 KB) More Documents & Publications EIS-0396: Advance Notice of Intent o Prepare an Environmental Impact Statement EIS-0396: Notice of Intent to Prepare a Programmatic Environmental Impact Statement Meeting Minutes: February 20-21, 2007

  12. DOE-STD-1172-2003; Safety Software Quality Assurance Functional...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Supporting Knowledge, Skills, and Abilities a. Identify how functional requirements and applicability of safety analysis and design computer codes are defined, documented, and ...

  13. Light-Weight Radioisotope Heater Unit Safety Analysis Report (LWRHU-SAR). Volume I. A. Introduction and executive summary. B. Reference Design Document (RDD)

    SciTech Connect (OSTI)

    Johnson, E.W.

    1985-10-01

    The orbiter and probe portions of the NASA Galileo spacecraft contain components which require auxiliary heat during the mission. To meet these needs, the Department of Energy's (DOE's) Office of Special Nuclear Projects (OSNP) has sponsored the design, fabrication, and testing of a one-watt encapsulated plutonium dioxide-fueled thermal heater named the Light-Weight Radioisotope Heater Unit (LWRHU). This report addresses the radiological risks which might be encountered by people both at the launch area and worldwide should postulate mission failures or malfunctions occur, which would result in the release of the LWRHUs to the environment. Included are data from the design, mission descriptions, postulated accidents with their consequences, test data, and the derived source terms and personnel exposures for the various events.

  14. Light-Weight Radioisotope Heater Unit final safety analysis report (LWRHU-FSAR): Volume 1: A. Introduction and executive summary: B. Reference Design Document (RDD)

    SciTech Connect (OSTI)

    Johnson, E.W.

    1988-10-01

    The orbiter and probe portions of the National Aeronautics and Space Administration (NASA) Galileo spacecraft contain components which require auxiliary heat during the mission. To meet these needs, the Department of Energy's (DOE's) Office of Special Applications (OSA) has sponsored the design, fabrication, and testing of a one-watt encapsulated plutonium dioxide-fueled thermal heater named the Light-Weight Radioisotope Heater Unit (LWRHU). This report, prepared by Monsanto Research Corporation (MRC), addresses the radiological risks which might be encountered by people both at the launch area and worldwide should postulated mission failures or malfunctions occur, resulting in the release of the LWRHUs to the environment. Included are data from the design, mission descriptions, postulated accidents with their consequences, test data, and the derived source terms and personnel exposures for the various events. 11 refs., 44 figs., 11 tabs.

  15. Designing a minimum-functionality neutron and gamma measurement instrument with a focus on authentication

    SciTech Connect (OSTI)

    Karpius, Peter J; Williams, Richard B

    2009-01-01

    During the design and construction of the Next-Generation Attribute-Measurement System, which included a largely commercial off-the-shelf (COTS), nondestructive assay (NDA) system, we realized that commercial NDA equipment tends to include numerous features that are not required for an attribute-measurement system. Authentication of the hardware, firmware, and software in these instruments is still required, even for those features not used in this application. However, such a process adds to the complexity, cost, and time required for authentication. To avoid these added authenticat ion difficulties, we began to design NDA systems capable of performing neutron multiplicity and gamma-ray spectrometry measurements by using simplified hardware and software that avoids unused features and complexity. This paper discusses one possible approach to this design: A hardware-centric system that attempts to perform signal analysis as much as possible in the hardware. Simpler processors and minimal firmware are used because computational requirements are kept to a bare minimum. By hard-coding the majority of the device's operational parameters, we could cull large sections of flexible, configurable hardware and software found in COTS instruments, thus yielding a functional core that is more straightforward to authenticate.

  16. Interim Approach to the MRS facility design

    SciTech Connect (OSTI)

    Not Available

    1992-01-01

    The purpose is to present the proposed Interim Approach to the Monitored Retrievable Storage (MRS) facility design development. This Interim Approach document fulfills the function allocated to the OCRWM-SEMP (DOE/RW-0051REVlP, March 1990, Section 5.2 Approach to the MRS Design) until the MRS section of the OCRWM-SEMP is approved. Until completion of the OCRWM-SEMP, this Interim Approach document will be approved and controlled according to the Program Change Control Procedure (DOE/RW-0223REV3P). This document discusses the general approach to Conceptual Design (CD), Title I Design, and Title II Design activities.

  17. AVLIS documentation overview and tables of contents

    SciTech Connect (OSTI)

    Not Available

    1984-11-15

    Three documents constitute the executive summary series in Data Package III: this document (Documentation Overview and Tables of Contents (E001)) plus the AVLIS Production Plant Executive Summary (E010) and the AVLIS Production Plant Overall Design Report (E020). They provide progressively greater detail on the key information and conclusions contained within the data package. The Executive Summary and Overall Design Report present summaries of each Data Package III document. They are intended to provide a global overview of AVLIS Production Plant deployment including program planning, project management, schedules, engineering design, production, operations, capital cost, and operating cost. The purpose of Overview and Tables of Contents is threefold: to briefly review AVLIS goals for Data Package III documentation, to present an overview of the contents of the data package, and to provide a useful guide to information contained in the numerous documents comprising the package.

  18. Audit Implementation Design Plan | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Audit Implementation Design Plan Document Number: NA Effective Date: 08

  19. PDF Document (1182k)

    Office of Legacy Management (LM)

    Only critical information was scanned. Entire document is available upon request - Click here to email a request....

  20. Classification Documents and Publications

    Broader source: Energy.gov [DOE]

    Certain documents and publications created or issued by the Office of Classification are available from this page.

  1. WIPP RCRA Documents menu

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    RCRA Documents Menu Permit Modifications Available for Public Comment Final Documents Draft Documents None currently available RCRA-Related Documents EEG Preliminary Comments on the Fundamental Bases of the Characterization Requirements for Disposal of Transuranic Waste at the Waste Isolation Pilot Plant and Findings and Recommendations of the Transuranic Waste Characterization Task Force Final Report EEG Response to NAS WIPP Committee Questions for May 19, 2003 Meeting Quality Assurance Program

  2. TITLE XVII GOVERNING DOCUMENTS

    Broader source: Energy.gov [DOE]

    The following lists documents that provide the statutory and legislative framework for the Title XVII loan guarantee program.

  3. GTT Tranmission Workshop- Documents

    Broader source: Energy.gov [DOE]

    Use the links below to download documents from the GTT Transmission Workshop, held November 1-2, 2012.

  4. Sandia Energy - SCADA Documents

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Documents Home Stationary Power Safety, Security & Resilience of Energy Infrastructure Grid Modernization Cyber Security for Electric Infrastructure National Supervisory Control...

  5. ARM - XDC Documentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Documentation External Data Center Order Data Description of External Data Streams Data Viewers and Plots (selected data sets) XDC Documentation XDC Documentation BNL's ARM Related General Report The monthly reports on work done for the ARM Project. Description of External Data Streams Documentation of External Data-Streams includes sources, measurements, area, time-ranges, contacts, etc. External Projects Contacts Includes information on external projects covering ARM ACRF sites. Instructions

  6. SPEAR3 | Technical Documentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Technical Documentation Hardware Component Database: Mechanical Electrical Drawing shor tcuts BPM Development SSRL | SLAC | Stanford University | SSRL Computing | SLAC Computing...

  7. Office of Document Reviews

    Broader source: Energy.gov [DOE]

    The Office of Document Reviews ensures that all documents prepared at DOE Headquarters are properly marked to identify the level and category of protected information they contain (if any) and to ensure that all documents the Department prepares or is required to review under applicable statutes for public release contain no information requiring protection under law, regulations and Executive orders.

  8. Functional design criteria for FY 1993-2000 groundwater monitoring wells

    SciTech Connect (OSTI)

    Williams, B.A.

    1996-01-01

    The purpose of this revision is to update the Line Item Project, 93-L-GFW-152 Functional Design Criteria (FDC) to reflect changes approved in change control M-24-91-6, Engineering Change Notices (ECNs), and expand the scope to include subsurface investigations along with the borehole drilling. This revision improves the ability and effectiveness of maintaining RCRA and Operational groundwater compliance by combining borehole and well drilling with subsurface data gathering objectives. The total projected number of wells to be installed under this project has decreased from 200 and the scope has been broadened to include additional subsurface investigation activities that usually occur simultaneously with most traditional borehole drilling and monitoring well installations. This includes borehole hydrogeologic characterization activities, and vadose monitoring. These activities are required under RCRA 40 CFR 264 and 265 and WAC 173-303 for site characterization, groundwater and vadose assessment and well placement.

  9. Computational design of intrinsic molecular rectifiers based on asymmetric functionalization of N-phenylbenzamide

    SciTech Connect (OSTI)

    Ding, Wendu; Koepf, Matthieu; Koenigsmann, Christopher; Batra, Arunabh; Venkataraman, Latha; Negre, Christian F. A.; Brudvig, Gary W.; Crabtree, Robert H.; Schmuttenmaer, Charles A.; Batista, Victor S.

    2015-11-03

    Here, we report a systematic computational search of molecular frameworks for intrinsic rectification of electron transport. The screening of molecular rectifiers includes 52 molecules and conformers spanning over 9 series of structural motifs. N-Phenylbenzamide is found to be a promising framework with both suitable conductance and rectification properties. A targeted screening performed on 30 additional derivatives and conformers of N-phenylbenzamide yielded enhanced rectification based on asymmetric functionalization. We demonstrate that electron-donating substituent groups that maintain an asymmetric distribution of charge in the dominant transport channel (e.g., HOMO) enhance rectification by raising the channel closer to the Fermi level. These findings are particularly valuable for the design of molecular assemblies that could ensure directionality of electron transport in a wide range of applications, from molecular electronics to catalytic reactions.

  10. Computational design of intrinsic molecular rectifiers based on asymmetric functionalization of N-phenylbenzamide

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Ding, Wendu; Koepf, Matthieu; Koenigsmann, Christopher; Batra, Arunabh; Venkataraman, Latha; Negre, Christian F. A.; Brudvig, Gary W.; Crabtree, Robert H.; Schmuttenmaer, Charles A.; Batista, Victor S.

    2015-11-03

    Here, we report a systematic computational search of molecular frameworks for intrinsic rectification of electron transport. The screening of molecular rectifiers includes 52 molecules and conformers spanning over 9 series of structural motifs. N-Phenylbenzamide is found to be a promising framework with both suitable conductance and rectification properties. A targeted screening performed on 30 additional derivatives and conformers of N-phenylbenzamide yielded enhanced rectification based on asymmetric functionalization. We demonstrate that electron-donating substituent groups that maintain an asymmetric distribution of charge in the dominant transport channel (e.g., HOMO) enhance rectification by raising the channel closer to the Fermi level. These findingsmore » are particularly valuable for the design of molecular assemblies that could ensure directionality of electron transport in a wide range of applications, from molecular electronics to catalytic reactions.« less

  11. Steam Reforming, 6-in. Bench-Scale Design and Testing Project -- Technical and Functional Requirements Description

    SciTech Connect (OSTI)

    Losinski, Sylvester John; Marshall, Douglas William

    2002-08-01

    Feasibility studies and technology development work are currently being performed on several processes to treat radioactive liquids and solids currently stored at the Idaho Nuclear Technology and Engineering Center (INTEC), located within the Idaho National Engineering and Environmental Laboratory (INEEL). These studies and development work will be used to select a treatment process for treatment of the radioactive liquids and solids to meet treatment milestones of the Settlement Agreement between the Department of Energy and the State of Idaho. One process under consideration for treating the radioactive liquids and solids, specifically Sodium-Bearing Waste (SBW) and tank heel solids, is fluid bed steam reforming (FBSR). To support both feasibility and development studies a bench-scale FBSR is being designed and constructed. This report presents the technical and functional requirements, experimental objectives, process flow sheets, and equipment specifications for the bench-scale FBSR.

  12. System Design Description PFP Thermal Stabilization

    SciTech Connect (OSTI)

    RISENMAY, H.R.

    2000-04-25

    The purpose of this document is to provide a system design description (SDD) and design basis for the Plutonium Finishing Plant (PFP) Thermal Stabilization project. The chief objective of the SDD is to document the Structures, Systems, and Components (SSCs) that establish and maintain the facility Safety Envelope necessary for normal safe operation of the facility; as identified in the FSAR, the OSRs, and Safety Assessment Documents (SADs). This safety equipment documentation should satisfy guidelines for the SDD given in WHC-SD-CP-TI-18 1, Criteria for Identification and Control of Equipment Necessary for Preservation of the Safety Envelope and Safe Operation of PFP. The basis for operational, alarm response, maintenance, and surveillance procedures are also identified and justified in this document. This document and its appendices address the following elements of the PFP Thermal Stabilization project: Functional and design requirements; Design description; Safety Envelope Analysis; Safety Equipment Class; and Operational, maintenance and surveillance procedures.

  13. Designing Dual-functionalized Gels for Self-reconfiguration and Autonomous Motion

    SciTech Connect (OSTI)

    Kuksenok, Olga; Balazs, Anna C.

    2015-04-30

    Human motion is enabled by the concerted expansion and contraction of interconnected muscles that are powered by inherent biochemical reactions. One of the challenges in the field of biomimicry is eliciting this form of motion from purely synthetic materials, which typically do not generate internalized reactions to drive mechanical action. Moreover, for practical applications, this bio-inspired motion must be readily controllable. Herein, we develop a computational model to design a new class of polymer gels where structural reconfigurations and internalized reactions are intimately linked to produce autonomous motion, which can be directed with light. These gels contain both spirobenzopyran (SP) chromophores and the ruthenium catalysts that drive the oscillatory Belousov-Zhabotinsky (BZ) reaction. Importantly, both the SP moieties and the BZ reaction are photosensitive. When these dual-functionalized gels are exposed to non-uniform illumination, the localized contraction of the gel (due to the SP moieties) in the presence of traveling chemical waves (due to the BZ reaction) leads to new forms of spontaneous, self-sustained movement, which cannot be achieved by either of the mono-functionalized networks.

  14. Designing Dual-functionalized Gels for Self-reconfiguration and Autonomous Motion

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Kuksenok, Olga; Balazs, Anna C.

    2015-04-30

    Human motion is enabled by the concerted expansion and contraction of interconnected muscles that are powered by inherent biochemical reactions. One of the challenges in the field of biomimicry is eliciting this form of motion from purely synthetic materials, which typically do not generate internalized reactions to drive mechanical action. Moreover, for practical applications, this bio-inspired motion must be readily controllable. Herein, we develop a computational model to design a new class of polymer gels where structural reconfigurations and internalized reactions are intimately linked to produce autonomous motion, which can be directed with light. These gels contain both spirobenzopyran (SP)more » chromophores and the ruthenium catalysts that drive the oscillatory Belousov-Zhabotinsky (BZ) reaction. Importantly, both the SP moieties and the BZ reaction are photosensitive. When these dual-functionalized gels are exposed to non-uniform illumination, the localized contraction of the gel (due to the SP moieties) in the presence of traveling chemical waves (due to the BZ reaction) leads to new forms of spontaneous, self-sustained movement, which cannot be achieved by either of the mono-functionalized networks.« less

  15. Tuning the Topology and Functionality of Metal–Organic Frameworks by Ligand Design

    SciTech Connect (OSTI)

    Zhao, Dan; Timmons, Daren J; Yuan, Daqiang; Zhou, Hong-Cai

    2011-02-15

    Metal–organic frameworks (MOFs)—highly crystalline hybrid materials that combine metal ions with rigid organic ligands—have emerged as an important class of porous materials. The organic ligands add flexibility and diversity to the chemical structures and functions of these materials. In this Account, we summarize our laboratory’s experience in tuning the topology and functionality of MOFs by ligand design. These investigations have led to new materials with interesting properties. By using a ligand that can adopt different symmetry conformations through free internal bond rotation, we have obtained two MOFs that are supramolecular stereoisomers of each other at different reaction temperatures. In another case, where the dimerized ligands function as a D₃-Piedfort unit spacer, we achieve chiral (10,3)-a networks. In the design of MOF-based materials for hydrogen and methane storage, we focused on increasing the gas affinity of frameworks by using ligands with different geometries to control the pore size and effectively introduce unsaturated metal centers (UMCs) into the framework. Framework interpenetration in PCN-6 (PCN stands for porous coordination network) can lead to higher hydrogen uptake. Because of the proper alignment of the UMCs, PCN-12 holds the record for uptake of hydrogen at 77 K/760 Torr. In the case of methane storage, PCN-14 with anthracene-derived ligand achieves breakthrough storage capacity, at a level 28% higher than the U.S. Department of Energy target. Selective gas adsorption requires a pore size comparable to that of the target gas molecules; therefore, we use bulky ligands and network interpenetration to reduce the pore size. In addition, with the help of an amphiphilic ligand, we were able to use temperature to continuously change pore size in a 2D layer MOF. Adding charge to an organic ligand can also stabilize frameworks. By ionizing the amine group within mesoMOF-1, the resulting electronic repulsion keeps the network from

  16. Remedial action plan and site design for stabilization of the inactive Uranium Mill Tailings Site at Lowman, Idaho: Attachment 1, Specifications and design drawings, LOW; Subcontract Documents: Bid schedule, special conditions, specifications, subcontract drawings. Final design for construction, Appendix B of the Cooperative Agreement

    SciTech Connect (OSTI)

    Not Available

    1991-09-01

    This volume contains subcontract documents which include: bidding requirements; terms and conditions; specifications; and subcontract drawings.

  17. Enron Documents 2000 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    0 Enron Documents 2000 Enron Documents for 2000, enron2000.pdf PDF icon Enron Documents 2000 More Documents & Publications Enron Documents 1996 FOIA - Enron Documents Documents ...

  18. Enron Documents 1998 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    8 Enron Documents 1998 Enron Documents 1998 PDF icon Enron Documents 1998 More Documents & Publications FOIA - Enron Documents Enron Documents 1993 Enron Documents 1996

  19. Enron Documents 1993 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3 Enron Documents 1993 Enron Documents 1993. enron1993.pdf PDF icon Enron Documents 1993 More Documents & Publications FOIA - Enron Documents Enron Documents 1998 Enron Documents ...

  20. Enron Documents 1996 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6 Enron Documents 1996 Enron Documents 1996 PDF icon Enron Documents 1996 More Documents & Publications Enron Documents 2000 FOIA - Enron Documents Enron Documents 2001

  1. NETL DOCUMENT LIBRARY

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Library NETL Document Library You can search for documents by selecting the appropriate link with in the content section or use the Search feature below Coal Document Library In response to concerns of climate change, the United States is contemplating a complete and rapid transformation of the way it both produces and consumes energy to significantly reduce its carbon emissions. The integrated Coal Program focuses on retaining the benefits of continuing to use coal to produce electric power.

  2. Community impact documents

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Community » Community impact documents Community impact documents Fact sheets, program summaries, and other documents provide insight into the Laboratory's community efforts and impact in Northern New Mexico. Contacts Kathy Keith Community Partnerships Office (505) 665-4400 Email Making a difference in Northern New Mexico Fact sheets by county Los Alamos (pdf) Rio Arriba (pdf) San Miguel and Mora (pdf) Santa Fe (pdf) Taos (pdf) General Community Commitment Plan (pdf) | Archive Community Leaders

  3. Bylaws and Other Documents

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Bylaws and Other Documents Postdoc Association Bylaws Bylaws and information about rules of order, meeting conduct, and motions. Contact Postdoc Program Office Email How to go about properly conducting business at a General Assembly Meeting Refer to the postdoc bylaws and other documents, below, for information on how to go about properly conducting business at a LAPA General Assembly (GA) Meeting. The first two documents will be available on the tables at the GA meetings for reference: Bylaws

  4. Archived Publications and Documents

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Archived Publications and Documents Print ALS 20-Year Roadmap, 2003 Presentations made to the BESAC subcommittee on the 20-Year BES Facilities Roadmap, with references and relevant...

  5. Plans, Updates, Regulatory Documents

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Permit for Storm Water Documents Individual Permit NPDES No. NM0030759 (pdf) Storm Water Plans Site Discharge Pollution Prevention Plan (SDPPP) Volume 1 - Los AlamosPueblo...

  6. EFRC Management Reference Document

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    EFRC management reference document Energy Frontier Research Centers Acknowledgments of Support (v.1, October 2009) Office of Basic Energy Sciences Office of Science US Department ...

  7. Documents for Foreign Nationals

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    present the following documents when they register at the ALS User Services Office: Passport: Passport must show issue and expiration date, passport number, and photo. I-94...

  8. EECBG 2016 Guidance Documents

    Broader source: Energy.gov [DOE]

    The Energy Efficiency and Conservation Block Grant (EECBG) Program released guidance documents that explain how the recipients of EECBG funds need to report and manage those funds.

  9. Hazard Baseline Documentation

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1995-12-04

    This standard establishes uniform Office of Environmental Management (EM) guidance on hazard baseline documents that identify and control radiological and non-radiological hazards for all EM facilities.

  10. Documents | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Documents Memorandum from Secretary Moniz on the Freedom of Information Act (PDF) Agency Improvement Plan (PDF) FOIA Backlog Reduction Goals for Fiscal Years 2008, 2009, and 2010 ...

  11. Buy American Guidance Documents

    Office of Energy Efficiency and Renewable Energy (EERE)

    Projects funded by the American Recovery and Reinvestment Act of 2009 (Recovery Act) were required to follow the Buy American Provision. Below are Buy American guidance documents.

  12. 340 Facility Secondary Containment and Leak Detection Project W-302 Functional Design Criteria

    SciTech Connect (OSTI)

    Stordeur, R.T.

    1995-03-01

    This functional design criteria for the upgrade to the 340 radioactive liquid waste storage facility (Project W-302) specifically addresses the secondary containment issues at the current vault facility of the 340 Complex. This vault serves as the terminus for the Radioactive Liquid Waste System (RLWS). Project W-302 is necessary in order to bring this portion of the Complex into full regulatory compliance. The project title, ``340 Facility Secondary Containment and Leak Detection``, illustrates preliminary thoughts of taking corrective action directly upon the existing vault (such as removing the tanks, lining the vault, and replacing tanks). However, based on the conclusion of the engineering study, ``Engineering Study of the 300 Area Process Wastewater Handling System``, WHC-SD-WM-ER-277 (as well as numerous follow-up meetings with cognizant staff), this FDC prescribes a complete replacement of the current tank/vault system. This offers a greater array of tanks, and provides greater operating flexibility and ease of maintenance. This approach also minimizes disruption to RLWS services during ``tie-in``, as compared to the alternative of trying to renovate the old vault. The proposed site is within the current Complex area, and maintains the receipt of RLWS solutions through gravity flow.

  13. IDC System Specification Document.

    SciTech Connect (OSTI)

    Clifford, David J.

    2014-12-01

    This document contains the system specifications derived to satisfy the system requirements found in the IDC System Requirements Document for the IDC Reengineering Phase 2 project. Revisions Version Date Author/Team Revision Description Authorized by V1.0 12/2014 IDC Reengineering Project Team Initial delivery M. Harris

  14. Sandia Energy - Reference Model Documents

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Documents Home Stationary Power Energy Conversion Efficiency Water Power Reference Model Project (RMP) Reference Model Documents Reference Model DocumentsTara Camacho-Lopez2015-05-...

  15. WIPP Documents - All documents by title

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    All documents by title A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 40 CFR Part 191 Environmental radiation protection standards for management and disposal of spent nuclear fuel, high-level and transuranic radioactive wastes. 40 CFR Part 194 Criteria for the certification and re-certification of theWaste Isolation Pilot Plant's compliance with the 40 CFR Part 191 disposal regulations. A Back to top Accelerating Cleanup: Paths to Closure The Department of Energy Carlsbad Field Office's

  16. DOCUMENT RELEASE FORM C

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    RELEASE FORM C (1) Document Number: RPP-RPT-431 74 (2) Revision Number: (3) Effective Date: 9/30/2009 (4) Document Type: El Digital Image El Hard copy (a) Number of pages (including the DRF) or 107 E PDF E] Video number of digital images (5) Release Type 0 New El Cancel El Page Change El complete Revision (6) Document Title: 2009 Auto-TOR for Tank 241 -T-204 (7) Change/Release Initial Issuance Description: (8) Change Initial Issuance Justification: (9) Associated (a) Structure Location: (c)

  17. Geochemistry Technical Basis Document

    SciTech Connect (OSTI)

    Benedict, Jr, F Christopher; Rose, Timothy P; Thomas, James M; Waddell, Richard; Jacobson, Roger

    2004-03-18

    This document presents a methodology whereby geochemical data can more effectively contribute to the development , calibration, and verification of groundwater flow and slute transport models for the Underground Test Area (UGTA) Project.

  18. Document (17k)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    document.xml.rels &3; wordrelssettings.xml.rels &3; wordrels &3; worddocument.xml SAM PLE APPROVAL MEMORANDUM FOR ADMINISTRATIVE CHANGES ONLY (Updated 2-26-2013) (NOTE: Per...

  19. Controlled Document Tracking Software

    Energy Science and Technology Software Center (OSTI)

    1992-08-24

    MANTRACK is an automated, controlled document tracking system which does the following and reduces staff time required to perform these tasks: generates transmittal letters/receipts for every controlled copy issued (merged from a current distribution list), tracks the return of transmittal receipts, facilitates the check-in of the large number of transmittal receipts returned (using a barcode reader), generates a reminder list which prompts the cyclic review and evaluation of existing documents, generates overdue reminders for themore » return of past-due transmittal receipts, tracks the number of Procedure Change Directives (PCD) currently in effect for each procedure, generates and maintains current distribution lists for each document, generates a current table of contents when updates to the document (usually a procedure manual) are made.« less

  20. RACEE Phase 2 Documents

    Office of Energy Efficiency and Renewable Energy (EERE)

    In Phase 2 of the Remote Alaskan Communities Energy Efficiency (RACEE) Competition, the U.S. Department of Energy provided targeted technical assistance to up to 20 selected Community Efficiency Champions. The documents below are resources for Phase 2.

  1. Cray XT Documentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    & Cray XT Documentation Search Preferences | Advanced Search Home Browse Books Man Pages Glossary Platforms Cray XC Cray XE and Cray XK Cray XT Cray X2 Cray X1 Data...

  2. Cray XE Documentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cray XE and Cray XK Documentation Search Preferences | Advanced Search Home Browse Books Man Pages Glossary Platforms Cray XC Cray XE and Cray XK Cray XT Cray X2 Cray X1 Data...

  3. WIPP Documents - Nuclear Safety

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nuclear Safety DOE/WIPP-07-3372, Revision 5b, WIPP Documented Safety Analysis Approved April 2016 The Documented Safety Analysis addresses all hazards (both radiological and nonradiological) and the controls necessary to provide adequate protection to the public, workers, and the environment. The WIPP DSA demonstrates the extent to which the Waste Isolation Pilot Plant can be operated safely with respect to workers, the public, and the environment. DOE/WIPP-07-3373, Revision 5b, WIPP Technical

  4. TWRS configuration management requirement source document

    SciTech Connect (OSTI)

    Vann, J.M.

    1997-09-17

    The TWRS Configuration Management (CM) Requirement Source document prescribes CM as a basic product life-cycle function by which work and activities are conducted or accomplished. This document serves as the requirements basis for the TWRS CM program. The objective of the TWRS CM program is to establish consistency among requirements, physical/functional configuration, information, and documentation for TWRS and TWRS products, and to maintain this consistency throughout the life-cycle of TWRS and the product, particularly as changes are being made.

  5. SURFACE INDUSTRIAL HVAC SYSTEM DESCRIPTION DOCUMENT

    SciTech Connect (OSTI)

    M.M. Ansari

    2005-04-05

    The purpose of this system description document (SDD) is to establish requirements that drive the design of the surface industrial heating, ventilation, and air-conditioning (HVAC) system and its bases to allow the design effort to proceed to license application. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the system. Knowledge of these requirements is essential to performing the design process. The SDD follows the design with regard to the description of the system. The description that provided in this SDD reflects the current results of the design process.

  6. Hazard baseline documentation

    SciTech Connect (OSTI)

    Not Available

    1994-08-01

    This DOE limited technical standard establishes uniform Office of Environmental Management (EM) guidance on hazards baseline documents that identify and control radiological and nonradiological hazards for all EM facilities. It provides a road map to the safety and health hazard identification and control requirements contained in the Department`s orders and provides EM guidance on the applicability and integration of these requirements. This includes a definition of four classes of facilities (nuclear, non-nuclear, radiological, and other industrial); the thresholds for facility hazard classification; and applicable safety and health hazard identification, controls, and documentation. The standard applies to the classification, development, review, and approval of hazard identification and control documentation for EM facilities.

  7. Document clustering methods, document cluster label disambiguation methods, document clustering apparatuses, and articles of manufacture

    DOE Patents [OSTI]

    Sanfilippo, Antonio; Calapristi, Augustin J.; Crow, Vernon L.; Hetzler, Elizabeth G.; Turner, Alan E.

    2009-12-22

    Document clustering methods, document cluster label disambiguation methods, document clustering apparatuses, and articles of manufacture are described. In one aspect, a document clustering method includes providing a document set comprising a plurality of documents, providing a cluster comprising a subset of the documents of the document set, using a plurality of terms of the documents, providing a cluster label indicative of subject matter content of the documents of the cluster, wherein the cluster label comprises a plurality of word senses, and selecting one of the word senses of the cluster label.

  8. Documents for Foreign Nationals

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Documents for Foreign Nationals Print All foreign nationals (non-U.S. citizens) intending to work at the ALS must ensure that they have all relevant travel and visa documents completed and approved before they will be permitted to work at Berkeley Lab. Owing to increased security measures, it is particularly important to begin the visa application process early in order to avoid delays that may result in lost beamtime, etc. NOTE: Researchers who are citizens of, or were born in, T4 countries

  9. IXPUG ISC15 Documents

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Training » IXPUG ISC15 Documents IXPUG ISC15 Documents Sort by: Default | Name | Date (low-high) | Date (high-low) | Source | Category BoF: IXPUG ISC15 BoF Introduction July 15, 2015 | Author(s): Thomas Steinke, ZIB | Download File: 1Welcome.pdf | pdf | 98 KB BoF: How Effective is SIMD in Case of Divergent Code Execution? Author(s): Florian Wende | Download File: ISC15-IXPUG-BoF-ZIB-Wende.pdf | pdf | 744 KB Workshop: Language Impact on Vectorization: Vector Programming in Fortran Author(s):

  10. Controlling OSHA PSM documentation

    SciTech Connect (OSTI)

    Person, J.S. [Warren-Forthought, Inc., Angleton, TX (United States)

    1997-06-01

    At present, most companies in the hazardous materials process industries are knowledgeable in the requirements of the OSHA Process Safety Management (PSM) standard (29 CFR 1910.119), issued in May of 1992. The current question facing many of these companies is no longer ``How does one comply?`` but rather, ``What does one do with all the documentation generated from the OSHA PSM Standard?``. Using an Electronic Performance Support System (EPSS) for delivering and controlling OSHA PSM documentation will be discussed. This paper will address the important components of an EPSS and successful case studies.

  11. DOCUMENT RELEASE FORM

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 (2) Revision Number: 0 (3) Effective Date: 9/28/2009 (4) Document Type: [] Digital Image El Hard copy (a) Number of pages (including the DRF) or 74 0PDF E] Video number of digital images (5) Release Type E New El cancel l Page Change El complete Revision (6) Document Title: 2009 Auto-TCR for Tank 241-13-204 (7) Change/Release Initial Issuance Description: (8) Change Initial Issuance Justification: (9) Associated (a) Structure Location: (c) Building Number: Structure, System, and Component N/A

  12. DOCUMENT RELEASE FORM

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    31 97 (2) Revision Number: 0 -- (3) Effective Date: 9/30/2009 (4) Document Type: E] Digital Image l Hard copy (a) Number of pages (including the DRF) or 84 0 POE E Video number of digital images (5) Release Type Z New 1:1 Cancel liiPage Change Elcomplete Revision (6) Document Title: 2009 Auto-TOR for Tank 241 -TY-1 05 (7) Change/Release Initial Issuance Description: (8) Change Initial Issuance Justification: (9) Associated (a) Structure Location: (c) Building Number: Structure, System, and

  13. QUEST2: Release 1, SA/Release 1 supporting documents deliverable set

    SciTech Connect (OSTI)

    Braaten, F.D.

    1995-02-27

    This document contains deliverables which reflect the last of the System Architecture phase analysis for the Quality, Environmental, Safety Tracking System redesign (QUEST2) project. These deliverables are focused on the final insights required to start functional design of the first QUEST2 release. They include the data definitions, conversion rules, standards for design and user interface, performance criteria, and rules to be followed during the prototyping activity described in the Project Management Plan.

  14. Remedial action plan and site design for stabilization of the inactive uranium mill tailings site at Tuba City, Arizona: Phase 2, Construction, Subcontract documents: Appendix E, final report. [Uranium Mill Tailings Remedial Action (UMTRA) Project

    SciTech Connect (OSTI)

    Not Available

    1989-08-01

    This appendix discusses Phase II construction and subcontract documents uranium mill site near Tuba City, Arizona. It contains the bid schedule, special conditions, specifications, and subcontract drawings.

  15. Document Splash Screen for Redirecting to Updated Document

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Document Imaging Document Imaging Converting Paper Documents into Electronic Files Converting paper documents into electronic files helps us manage, store, access and archive the organizational information we have "locked up" in paper documents. Utilizing high-quality document scanners, a top-end six-engine Optical Character Recognition (OCR) system and maintaining Quality Controls to provide a successful Imaging solution. Once converted, these electronic files can be indexed and

  16. Civilian Radioactive Waste Management System Requirements Document

    SciTech Connect (OSTI)

    C.A. Kouts

    2006-05-10

    The CRD addresses the requirements of Department of Energy (DOE) Order 413.3-Change 1, ''Program and Project Management for the Acquisition of Capital Assets'', by providing the Secretarial Acquisition Executive (Level 0) scope baseline and the Program-level (Level 1) technical baseline. The Secretarial Acquisition Executive approves the Office of Civilian Radioactive Waste Management's (OCRWM) critical decisions and changes against the Level 0 baseline; and in turn, the OCRWM Director approves all changes against the Level 1 baseline. This baseline establishes the top-level technical scope of the CRMWS and its three system elements, as described in section 1.3.2. The organizations responsible for design, development, and operation of system elements described in this document must therefore prepare subordinate project-level documents that are consistent with the CRD. Changes to requirements will be managed in accordance with established change and configuration control procedures. The CRD establishes requirements for the design, development, and operation of the CRWMS. It specifically addresses the top-level governing laws and regulations (e.g., ''Nuclear Waste Policy Act'' (NWPA), 10 Code of Federal Regulations (CFR) Part 63, 10 CFR Part 71, etc.) along with specific policy, performance requirements, interface requirements, and system architecture. The CRD shall be used as a vehicle to incorporate specific changes in technical scope or performance requirements that may have significant program implications. Such may include changes to the program mission, changes to operational capability, and high visibility stakeholder issues. The CRD uses a systems approach to: (1) identify key functions that the CRWMS must perform, (2) allocate top-level requirements derived from statutory, regulatory, and programmatic sources, and (3) define the basic elements of the system architecture and operational concept. Project-level documents address CRD requirements by further

  17. Documents | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Documents Memorandum from Secretary Moniz on the Freedom of Information Act (PDF) Agency Improvement Plan (PDF) FOIA Backlog Reduction Goals for Fiscal Years 2008, 2009, and 2010 (PDF) Ultra-Deepwater and Unconventional Natural Gas and Other Petroleum Resources (COMING SOON) Updated Report on Executive Order 13392 Implementation (PDF) Certification DOE Reading Rooms (pdf)

  18. PSP Program close out documentation

    SciTech Connect (OSTI)

    Andringa, K.; Hootman, H.E.; Ferrara, A.S.; Smith, P.K.; Congdon, J.W.; Randolph, H.W.; Young, R.H.; Driggers, F.E.; Topp, S.V.

    1985-12-31

    In December 1982 DOE-SR directed SRL to study the feasibility and impact of a program to lower the U-236 content of the Highly Enriched Uranium (HEU) stockpile used as fuel for the SRP reactors. In response to this request SRL assessed four technologies, Atomic Vapor Laser Isotope Separation (AVLIS), Molecular Laser Isotope Separation (MLIS), Gas Centrifuge, and the Plasma Separation Process (PSP) for this purpose with the assistance of the Engineering Department. In April 1983 cost/benefit analyses for these processes, high spot cost estimates for production facilities, and process uncertainties were submitted to DOE-SR with a recommendation to proceed with the conceptual design and supporting development programs for a facility based on the use of the PSP process. The current program status for the PSP development program at SRL and the design and documentation of a production facility at SRP, referred to as the Fuel Improvement Demonstration Facility (FIDF), is described in this report.

  19. PSP Program close out documentation

    SciTech Connect (OSTI)

    Andringa, K.; Hootman, H.E.; Ferrara, A.S.; Smith, P.K.; Congdon, J.W.; Randolph, H.W.; Young, R.H.; Driggers, F.E.; Topp, S.V.

    1985-01-01

    In December 1982 DOE-SR directed SRL to study the feasibility and impact of a program to lower the U-236 content of the Highly Enriched Uranium (HEU) stockpile used as fuel for the SRP reactors. In response to this request SRL assessed four technologies, Atomic Vapor Laser Isotope Separation (AVLIS), Molecular Laser Isotope Separation (MLIS), Gas Centrifuge, and the Plasma Separation Process (PSP) for this purpose with the assistance of the Engineering Department. In April 1983 cost/benefit analyses for these processes, high spot cost estimates for production facilities, and process uncertainties were submitted to DOE-SR with a recommendation to proceed with the conceptual design and supporting development programs for a facility based on the use of the PSP process. The current program status for the PSP development program at SRL and the design and documentation of a production facility at SRP, referred to as the Fuel Improvement Demonstration Facility (FIDF), is described in this report.

  20. NEPA Documents | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services » NEPA Documents NEPA Documents To see a list of available NEPA documents by type and sorted by publication date, click on the links below. Documents listed in this section are available to members of the public. To see documents not electronically available to the public see the Secure NEPA Documents page for more information. Categorical Exclusion (CX) Determinations Categorical exclusions are categories of actions that DOE has determined, by regulation, do not individually or

  1. Microsoft Word - Document1 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Document1 Microsoft Word - Document1 PDF icon Microsoft Word - Document1 More Documents & Publications Microsoft Word - Document2 Microsoft Word - ARRAAttachment12v1.doc Microsoft ...

  2. Enron Documents 2001 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1 Enron Documents 2001 Enron Documents 2001, enron2001.pdf PDF icon Enron Documents 2001 More Documents & Publications Enron Documents 2002 Biography - Spencer Abraham, Secretary, ...

  3. Documents Related to the INL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Financial Assistance & Solicitations > INL Contract > Documents Related INL Blue Line Free Acrobat Reader Link The documents listed below represent an electronic copy of...

  4. Documents Related to the ICP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Financial Assistance & Solicitations > ICP Contract > Documents Related ICP Blue Line Free Acrobat Reader Link The documents listed below are related to the Idaho Cleanup...

  5. ARM - Program Documents & Technical Reports

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govPublicationsProgram Documents & Technical Reports Additional Sorting By Report Type Annual Report (16) Instrument Handbook (100) Program Document (35) Quarterly Report (44) ...

  6. 2016 Information Repository Documents

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6 Information Repository Documents WIPP Annual Waste Minimization Report Class 1* Permit Modifications and NMED Responses Class 1 and Class 1* Modifications WIPP Hazardous Waste Facility Permit EPA I.D. Number NM4890139088-TSDF John E. Kieling/Hazardous Waste Bureau dated January 27, 2016 Class 1* Modification, requiring prior agency approval, seeking to Revise Closure Schedule Dates in Attachment G Class 1 Permit Modifications and NMED Responses Class 1 Modifications WIPP Hazardous Waste

  7. WINDExchange: Document Not Found

    Wind Powering America (EERE)

    EERE Logo WINDExchange WINDExchange Document Not Found The page you are looking for is no longer available. The U.S. Department of Energy Wind Program's stakeholder and engagement outreach information is now available through WINDExchange. WINDExchange continues DOE's efforts to make high-quality information and outreach materials readily available, including: maps of wind resources and installed wind capacity a bimonthly e-newsletter webinars and podcasts publications educational programs

  8. Archived Publications and Documents

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Archived Publications and Documents Print ALS 20-Year Roadmap, 2003 Presentations made to the BESAC subcommittee on the 20-Year BES Facilities Roadmap, with references and relevant links. Beamline Data Sheets Data sheets for individual ALS beamlines. The Atomic and Molecular Facility on Beamline 10.0.1 A guide to Beamline 10's facilities for general users studying atomic and molecular physics. (LBL PUB-832) World Class Protein Crystallography A guide to the facilities and capabilities of the

  9. WIPP Documents - Other

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Other Accelerating Cleanup: Paths to Closure The Department of Energy Carlsbad Field Office's proposed approach to cleaning up and closing transuranic waste storage sites. August 2004 Solid Waste Management Report Solid Waste Management Unit Activities from May 1, 2004 through July 31, 2004, August 2004 Quarterly Progress Report The Karst and Related Issues at the Waste Isolation Pilot Plant Dated 6/23/09 Pioneering Nuclear Waste Disposal DOE/CAO-00-3124, Feb. 2000 Documents the 40-plus year

  10. Microsoft Word - Document3

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... With most consumer products, design trumps, and housing is no different. Register for the webinar Update your subscriptions, modify your password or email address, or stop ...

  11. Enron Documents 1995

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 U.S. DEPARTMENT OF ENERGY OFFICE OF THE EXECUTIVE SECRETARIAT CORRESPONDENCE CONTROL TICKET IMPORTANT ES NUMBER: ES95-000672 EXTERNAL 'E OF DOC: 01/10/95 REC'D: 01/13/95 CONTROLLED: 01/13/95 DUE: FROM: HILLINGS,E JOSEPH DC O NOTES AREA: ENRON WASHINGTON, INC. SUBJECT ENCLOSES MOST RECENT ISSUE OF SUMMARY: "ENRON BUSINESS" SOURCE: PUBLIC MAIL DOCUMENT TYPE: LETTER ADDRESSED TO: SECRETARY FOR SIGNATURE OF: ACTION TO: POLICY ACTION TYPE: For your information ACTION OFFICER:

  12. Complete Experiment Safety Documentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Complete Experiment Safety Documentation Print User Safety Overview Upon receiving beam time: 1. Log in to ALSHub to complete an Experiment Safety Sheet (ESS). The ALS This e-mail address is being protected from spambots. You need JavaScript enabled to view it is available to support you through this process. Please contact This e-mail address is being protected from spambots. You need JavaScript enabled to view it at the email link or at (510) 486-7222 at if you have questions or need more

  13. Complete Experiment Safety Documentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Complete Experiment Safety Documentation Print User Safety Overview Upon receiving beam time: 1. Log in to ALSHub to complete an Experiment Safety Sheet (ESS). The ALS This e-mail address is being protected from spambots. You need JavaScript enabled to view it is available to support you through this process. Please contact This e-mail address is being protected from spambots. You need JavaScript enabled to view it at the email link or at (510) 486-7222 at if you have questions or need more

  14. Microsoft Word - Document1

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Greg Coulter [mailto:greg.coulter405@gmail.com] Sent: Friday, October 29, 2010 4:13 PM To: Barhydt, Laura Cc: Armstrong, Ashley; Leon Chapa Ismael Ricardo (GE Infra Energy Subject: GE-Prolec CCE Meeting October 19,2010 Ms. Barhydt, This e-mail documents the GE-Prolec CCE meeting of October 19, 2010 concerning Docket No. EERE-2010-BT-CE-0014. Mr. Ismael Leon and myself met with Ms. Ashley Armstrong, Ms. Celia Sher, Ms. Stephanie Weiner, and Ms. Laura Barhydt in your offices and discussed the

  15. Microsoft Word - Document5

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Serene Fang [mailto:Serene.Fang@aljazeera.net] Sent: Friday, September 26, 2014 3:17 PM To: Holloway, Jerry N Subject: RE: Media request - WRPS re: Hanford Hello Jerry, Here's a formal FOIA for the media material I'm interested in. If I need to send this to anyone else on the WRPS, ORP, DOE team, please let me know. This is a request under the Freedom of Information Act. I specifically request: - Any inspection video or documentation video or photographs of AY-102, the leaking double-shell tank

  16. Complete Experiment Safety Documentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Complete Experiment Safety Documentation Print User Safety Overview Upon receiving beam time: 1. Log in to ALSHub to complete an Experiment Safety Sheet (ESS). The ALS This e-mail address is being protected from spambots. You need JavaScript enabled to view it is available to support you through this process. Please contact This e-mail address is being protected from spambots. You need JavaScript enabled to view it at the email link or at (510) 486-7222 at if you have questions or need more

  17. Complete Experiment Safety Documentation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Complete Experiment Safety Documentation Print User Safety Overview Upon receiving beam time: 1. Log in to ALSHub to complete an Experiment Safety Sheet (ESS). The ALS This e-mail address is being protected from spambots. You need JavaScript enabled to view it is available to support you through this process. Please contact This e-mail address is being protected from spambots. You need JavaScript enabled to view it at the email link or at (510) 486-7222 at if you have questions or need more

  18. Microsoft Word - Document3

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for the NGNP and further define the reactor's performance, safety and functional requirements, as well as the estimated cost and schedule for its construction and operation. ...

  19. SRS ECOLOGY ENVIRONMENTAL INFORMATION DOCUMENT

    SciTech Connect (OSTI)

    Wike, L; Doug Martin, D; Eric Nelson, E; Nancy Halverson, N; John Mayer, J; Michael Paller, M; Rodney Riley, R; Michael Serrato, M

    2006-03-01

    The SRS Ecology Environmental Information Document (EEID) provides a source of information on the ecology of Savannah River Site (SRS). The SRS is a U.S. Department of Energy (DOE)--owned property on the upper Atlantic Coastal Plain of South Carolina, centered approximately 40 kilometers (25 miles) southeast of Augusta, Georgia. The entire site was designated a National Environmental Research Park in 1972 by the Atomic Energy Commission, the predecessor of DOE. This document summarizes and synthesizes ecological research and monitoring conducted on the three main types of ecosystems found at SRS: terrestrial, wetland and aquatic. It also summarizes the available information on the threatened and endangered species found on the Savannah River Site. SRS is located along the Savannah River and encompasses an area of 80,267 hectares (310 square miles) in three South Carolina counties. It contains diverse habitats, flora, and fauna. Habitats include upland terrestrial areas, wetlands, streams, reservoirs, and the adjacent Savannah River. These diverse habitats support a variety of plants and animals, including many commercially or recreationally valuable species and several rare, threatened, or endangered species. Soils are the basic terrestrial resource, influencing the development of terrestrial biological communities. Many different soils exist on the SRS, from hydric to well-drained, and from sand to clay. In general, SRS soils are predominantly well-drained loamy sands.

  20. Precise documentation of well-structured programs

    SciTech Connect (OSTI)

    Parnas, D.L.; Madey, J.; Iglewski, M.

    1997-11-01

    This paper describes a new form of program documentation that is precise, systematic and readable. This documentation comprises a set of displays supplemented by a lexicon and an index. Each display presents a program fragment in such a way that its correctness can be examined without looking at any other display. Each display has three parts: (1) the specification of the program presented in the display, (2) the program itself, and (3) the specifications of programs invoked by this program. The displays are intended to be used by Software Engineers as a reference document during inspection and maintenance. This paper also introduces a specification technique that is a refinement of Mills functional approach to program documentation and verification; programs are specified and described in tabular form.

  1. WASTE PACKAGE TRANSPORTER DESIGN

    SciTech Connect (OSTI)

    D.C. Weddle; R. Novotny; J. Cron

    1998-09-23

    The purpose of this Design Analysis is to develop preliminary design of the waste package transporter used for waste package (WP) transport and related functions in the subsurface repository. This analysis refines the conceptual design that was started in Phase I of the Viability Assessment. This analysis supports the development of a reliable emplacement concept and a retrieval concept for license application design. The scope of this analysis includes the following activities: (1) Assess features of the transporter design and evaluate alternative design solutions for mechanical components. (2) Develop mechanical equipment details for the transporter. (3) Prepare a preliminary structural evaluation for the transporter. (4) Identify and recommend the equipment design for waste package transport and related functions. (5) Investigate transport equipment interface tolerances. This analysis supports the development of the waste package transporter for the transport, emplacement, and retrieval of packaged radioactive waste forms in the subsurface repository. Once the waste containers are closed and accepted, the packaged radioactive waste forms are termed waste packages (WP). This terminology was finalized as this analysis neared completion; therefore, the term disposal container is used in several references (i.e., the System Description Document (SDD)) (Ref. 5.6). In this analysis and the applicable reference documents, the term ''disposal container'' is synonymous with ''waste package''.

  2. Appendix A: Conceptual Documents

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... from lightning strikes; scope and design of protection as defined in Section 111. b. ... Comply with applicable recommendations of IEEE 142-1991 and IEEE 1100-2005 and NFPA 780. ...

  3. DOCUMENT RELEASE FORM

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... including Design Growth" as 52.998. 14 Page 19 listing NFPA 70-1999 National Electric Code., Can 1999 edition of NFPA 70 be used for this modification, or NESC need to be listed? ...

  4. Internal Audit Documents | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Internal Audit Internal Audit Documents Internal Audit Charter Internal Audit Policy Post Award Auditing of Cost Reimbursable Subcontracts Policy 2008 Audit Plan 2009 Audit Plan 2010 Audit Plan 2011 Audit Plan 2012 Audit Plan 2013 Audit Plan 2014 Audit Plan 2015 Audit Plan 2016 Audit Plan Audit Implementation Design Plan Corrective Action Plan Procedure

  5. Project Management Publications & Documents | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Publications & Documents Project Management Publications & Documents << Return to Directives & Documents | Proceed to Policy & Guidance >> Filter by Source Filter by Topic

  6. Waste receiving and processing facility module 1, detailed design report

    SciTech Connect (OSTI)

    Not Available

    1993-10-01

    WRAP 1 baseline documents which guided the technical development of the Title design included: (a) A/E Statement of Work (SOW) Revision 4C: This DOE-RL contractual document specified the workscope, deliverables, schedule, method of performance and reference criteria for the Title design preparation. (b) Functional Design Criteria (FDC) Revision 1: This DOE-RL technical criteria document specified the overall operational criteria for the facility. The document was a Revision 0 at the beginning of the design and advanced to Revision 1 during the tenure of the Title design. (c) Supplemental Design Requirements Document (SDRD) Revision 3: This baseline criteria document prepared by WHC for DOE-RL augments the FDC by providing further definition of the process, operational safety, and facility requirements to the A/E for guidance in preparing the design. The document was at a very preliminary stage at the onset of Title design and was revised in concert with the results of the engineering studies that were performed to resolve the numerous technical issues that the project faced when Title I was initiated, as well as, by requirements established during the course of the Title II design.

  7. Directives Requiring Additional Documentation - DOE Directives,

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Delegations, and Requirements Requiring Additional Documentation by Website Administrator PDF document icon DirectivesRequiringAdditionalDocumentation (1).pdf - PDF document, 35 KB (36219

  8. ARM - Data Management and Documentation Plan

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DocumentationData Management and Documentation Plan Policies, Plans, Descriptions Data Documentation Home Data Sharing and Distribution Policy Data Management and Documentation ...

  9. Residential Demand Module - NEMS Documentation

    Reports and Publications (EIA)

    2014-01-01

    Model Documentation - Documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Residential Sector Demand Module. The report catalogues and describes the model assumptions, computational methodology, parameter estimation techniques, and FORTRAN source code.

  10. Guidance Documents | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Guidance Documents Guidance Documents Guidance documents for the financial opportunities process. Recipient's Guide to Negotiation with EERE (281.39 KB) DOE Guide to Financial Assistance (539.53 KB) DOE Merit Review Guide (223.37 KB) Technology Readiness Levels (TRLs) (255.77 KB) Generally Unallowable Costs (256.08 KB) Catalog of Federal Domestic Assistance Numbers (CFDA) (253.83 KB) More Documents & Publications Financial Assistance Guide (2013) Revised Guide for Financial Assistance