National Library of Energy BETA

Sample records for fraudulent digital certificates

  1. T-706: Microsoft Fraudulent Digital Certificate Issued by DigiNotar

    Broader source: Energy.gov [DOE]

    Fraudulent Digital Certificate Issued by DigiNotar, a Certification Authority Present in the Trusted Root Certification Authorities

  2. Construction Certifications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Certifications Individual Permit: Construction Certifications Enhanced control measures ... Alamos, NM 87545 (505) 667-0216 Email Construction Certifications Enhanced Controls SMA ...

  3. Construction Certifications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Certifications Individual Permit: Construction Certifications Enhanced control measures were designed and installed at 67 Sites in 42 SMAs in 2012. Contact Environmental Communication & Public Involvement P.O. Box 1663 MS M996 Los Alamos, NM 87545 (505) 667-0216 Email Construction Certifications Enhanced Controls SMA Submittal Date and Letter Certification Document 2M-SMA-1 July 25, 2012 (see document for submittal letter and certification) Submittal of Certification of Installation of

  4. Grid Certificates

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Do not use if your system has a centrally managed trusted certificates diretory (this includes all NERSC login nodes). You can view your certificate information at any time by ...

  5. T-727:Microsoft Windows SSL/TLS Protocol Flaw Lets Remote Users...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    U-033: Microsoft Security Bulletin Summary for November 2011 T-706: Microsoft Fraudulent Digital Certificate Issued by DigiNotar U-259: RSA BSAFE SSL-C Lets Remote Users Decrypt ...

  6. Patent Certification | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Patent Certification Patent Certification SF-2050.11, Patent Certification (8.03 KB) More Documents & Publications DOE F 2050.11 C:FormsDOE F 2050.11.cdr Department of Energy ...

  7. WIPP Documents - EPA Certification

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    EPA Certification Compliance Certification Application DOE's 72,000-page application submitted to the U.S. Environmental Protection Agency showing how WIPP meets all applicable federal transuranic radioactive waste standards. (Click on CCA -1996) Compliance Recertification Application - 2004 The recertification application showing how WIPP continues to meet all applicable federal transuranic radioactive waste standards. Compliance Recertification Application - 2009 The recertification

  8. Solar Equipment Certification Requirement

    Broader source: Energy.gov [DOE]

    All active solar space-heating and water-heating systems that are sold, offered for sale, or installed on residential and commercial buildings in Minnesota must meet Solar Rating and Certification...

  9. Renewable Energy Professional Certification

    Broader source: Energy.gov [DOE]

    Department of Labor and Training issues Renewable Energy Professional (REP) Certificate to any individual who is currently registered contractor in RI and fulfills at least one of the qualifications:

  10. Hydrogen Equipment Certification Guide

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Equipment Certification Guide U.S. Department of Energy Fuel Cell Technologies Office December 10 th , 2015 Presenter: Nick Barilo Pacific Northwest National Laboratory (PNNL) Hydrogen Safety Program Manager DOE Host: Will James - DOE Fuel Cell Technologies Office 2 | Fuel Cell Technologies Office eere.energy.gov Question and Answer * Please type your questions into the question box 2 / / Hydrogen Equipment Certification Guide: Introduction and Kickoff for the Stakeholder Review Nick Barilo PNNL

  11. Closeout Forms: Patent Certification | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Closeout Forms: Patent Certification Closeout Forms: Patent Certification Closeout forms for the financial opportunities process. Patent Certification (DOE F2050.11) (71 KB) Patent Certification Instructions and Example (66.93 KB) More Documents & Publications DOE F 2050.11 C:\Forms\DOE F 2050.11.cdr Patent Certification

  12. Patent Certification Instructions and Example

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    FORM 2050.11 INSTRUCTIONS This form is used for submitting Interim and Final Patent Certifications and must include a listing of all "Subject Inventions" made under the award for the period being certified. If the form does not afford sufficient space, multiple forms may be used or plain sheets of paper with proper identification of information by item number may be attached. Contractor: List the Name of the Contractor/Subcontractor Interim Certification/Final Certification: Check the

  13. End Use and Fuel Certification

    Broader source: Energy.gov [DOE]

    Breakout Session 2: Frontiers and Horizons Session 2–B: End Use and Fuel Certification John Eichberger, Vice President of Government Relations, National Association for Convenience Stores

  14. Webinar: Hydrogen Equipment Certification Guide

    Broader source: Energy.gov [DOE]

    The Fuel Cell Technologies Office will present a live webinar titled "Hydrogen Equipment Certification Guide" on Thursday, December 10, from 1 to 2 p.m. EST.

  15. Vermont Water Quality Certification Application for Hydroelectric...

    Open Energy Info (EERE)

    Water Quality Certification Application for Hydroelectric Facilities Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: Vermont Water Quality Certification...

  16. REC Generator Certification Application - Texas | Open Energy...

    Open Energy Info (EERE)

    REC Generator Certification Application - Texas Jump to: navigation, search OpenEI Reference LibraryAdd to library Reference: REC Generator Certification Application - Texas...

  17. Puerto Rico - Renewable Energy Equipment Certification | Department...

    Broader source: Energy.gov (indexed) [DOE]

    State Puerto Rico Program Type Equipment Certification Summary Certification of Photovoltaic Equipment EAA specifies that PV equipment must meet UL 1703 requirements, and...

  18. Energy Department Issues Green Building Certification System...

    Energy Savers [EERE]

    Green Building Certification System Final Rule to Support Increased Energy Measurement and Efficient Building Design Energy Department Issues Green Building Certification System ...

  19. CERTIFICATE OF AUTHENTICITY

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CERTIFICATE OF AUTHENTICITY I hereby certify that this transcript constitutes an accurate record of the full Council meeting of the National Coal Council held on November 14,2008 at the Westin Grand Hotel, Washington, D.C. ~ i c h a e l G. Mueller, Chair National Coal Council I NATIONAL COAL COUNCIL 1 FULL COUNCIL MEETING FRIDAY NOVEMBER 14, 2 0 0 8 The Full Council meeting convened at 9 : 0 0 a.m. in the Washington Ballroom of the Westin Grand Hotel, 2 3 5 0 M Street, NW, Washington, DC, Chair

  20. Quick Guide: Renewable Energy Certificates (RECs)

    SciTech Connect (OSTI)

    2011-07-18

    Guide for Federal agencies considering renewable energy certificate (REC) purchases to fulfill Federal renewable energy requirements.

  1. Renewable Energy Certificate Program

    SciTech Connect (OSTI)

    Gwendolyn S. Andersen

    2012-07-17

    This project was primarily to develop and implement a curriculum which will train undergraduate and graduate students at the University seeking a degree as well as training for enrollees in a special certification program to prepare individuals to be employed in a broad range of occupations in the field of renewable energy and energy conservation. Curriculum development was by teams of Saint Francis University Faculty in the Business Administration and Science Departments and industry experts. Students seeking undergraduate and graduate degrees are able to enroll in courses offered within these departments which will combine theory and hands-on training in the various elements of wind power development. For example, the business department curriculum areas include economic modeling, finance, contracting, etc. The science areas include meteorology, energy conversion and projection, species identification, habitat protection, field data collection and analysis, etc.

  2. LEED Certification | Open Energy Information

    Open Energy Info (EERE)

    LEED CertificationU.S. Green Building Council Address: U.S. Green Building Council 2101 L Street, NW Suite 500 Place: Washington, District of Columbia Zip: 20037 Sector:...

  3. PMCDP/FPD Certification (renewal)

    Broader source: Energy.gov [DOE]

    Continuous Learning Requirements: Persons certified under the PMCDP – and FAC-P/PM – are required to complete 80 continuous learning points (CLPs) biennially to maintain certification. All FPDs...

  4. Certificate in Renewable Energy and the Environment Forms | Photosynth...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Certificate in Renewable Energy and the Environment Forms Certificate in Renewable Energy and the Environment Forms Students interested in the certificate program should first...

  5. Acquisition Certifications Program Handbook 3rd Edition released

    Broader source: Energy.gov [DOE]

    The Acquisition Certifications Program Handbook 3rd Edition is revised to reorganize content, incorporate all Policy Flashes related to certifications, and update requirements information for certifications.

  6. Bureau Veritas Certification Holding BVC Holding | Open Energy...

    Open Energy Info (EERE)

    Veritas Certification Holding BVC Holding Jump to: navigation, search Name: Bureau Veritas Certification Holding (BVC Holding) Place: Spain Product: Accredited as a certification...

  7. EPA Redesigns Conversion Certification Policies

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    EPA Redesigns Conversion Certification Policies At a recent meeting held in Washington, DC, officials from the U.S. Environmental Protection Agency (EPA) opened dialogue about proposed changes to its emission certification policies that affect alternative fuel vehicles (AFVs). "We are trying to accommo- date the Energy Policy Act (EPAct) and Executive Order requirements while trying to change enforce- ment policies and guidance with respect to conversions," said Rich Ackerman of EPA's

  8. Attachment L-1 - Entity Certificates

    National Nuclear Security Administration (NNSA)

    3] Attachment L-1 1 ENTITY CERTIFICATE The offeror shall submit evidence to substantiate the authority of the person signing the offer and submit in Volume I of the proposal. CERTIFICATE I, _______________________________________________, certify that I have the signatory authority as the _________________________________________ to sign this offer/contract on behalf of said entity and to bind the entity by the authority of its governing body and within the scope of its powers. Affix the

  9. Fueling Components Testing and Certification

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Standards and Codes * National Recognized Standards * Enforceable Docs by 2012 * Code Cycle 2012 Vehicles ∙ Commercialization 2015 ∙ 50,000 by 2017 ∙ Consumer price ∙ 80% in CA Infrastructure ∙ 200 Stations in CA ∙ Accurate and Safe Equipment ∙ Commercial Venture ∙ Station Certification Implementation ∙ Component Certification * Public Awareness * General Education ∙ Technician Training ∙ Safety, Reliability and Accurate Evolving Hydrogen Vehicle Industry 3 Time Line -

  10. Small Wind Turbine Certifications Signal Maturing Industry |...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Small Wind Turbine Certifications Signal Maturing Industry Small Wind Turbine Certifications Signal Maturing Industry January 6, 2014 - 10:00am Addthis A 5-kW wind turbine with a ...

  11. Applying for PMCDP/FPD Certification (initial)

    Broader source: Energy.gov [DOE]

    Certification applicants are nominated by their respective Program Secretarial Office (PSO) to apply for FPD certification – candidates may not apply without program sponsorship. Each participating...

  12. PREPARING FOR A SUCCESSFUL EVMS CERTIFICATION

    SciTech Connect (OSTI)

    CROWE SL; BASCHE AD

    2011-02-09

    The client, a government agency, requires its contractor to obtain an Earned Value Management System (EVMS) certification that meets the intent of ANSI/EIA-748-B, Earned Value Management Systems. The contractor has extensive experience with certification preparation, having completed two certifications within two years. Information from a previous EVMS certification and internal system surveillances are used to prepare for client-based EVMS certifications and bi-annual surveillances. The contractor also sent members of its group to assist other companies preparing for surveillances and certifications to perform 'Black Hat Reviews.' This paper is a lessons learned on preparing a team for EVMS certification. The information is also applicable for surveillances, since the contractor prepares its team for the surveillance in the same manner as the initial certification. Some of the areas covered include required documents, tracing the data through the systems, Control Account Manager (CAM) preparation, and system verification.

  13. Application for COR Certification-Recertification

    Broader source: Energy.gov (indexed) [DOE]

    Solicitation number 1. Previous certification (attached): Date last issued or renewed: 2. Experience: (Attach COR Summary of Experience...

  14. Acquisition Certifications Handbook 4th edition released

    Broader source: Energy.gov [DOE]

    The Acquisition Certifications Program Handbook 4th Edition is released with latest content related to Realty Specialist chapter.

  15. Certifications for Use with DOE Loan Guarantees

    Energy Savers [EERE]

    August 2005 U.S. DEPARTMENT OF ENERGY FINANCIAL ASSISTANCE CERTIFICATIONS AND ASSURANCES FOR USE WITH SF 424 Applicant: Solicitation No.: DE- The following certifications and assurances must be completed and submitted with each application for financial assistance. The name of the person responsible for making the certifications and assurances must be typed in the signature block on the forms. Certifications Regarding Lobbying; Debarment, Suspension and Other Responsibility Matters; and Drug

  16. certification, compliance and enforcement regulations for Commercial...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PDF icon certification, compliance and enforcement regulations for Commercial Refrigeration Equipment (CRE) More Documents & Publications Regulatory Burden RFI Executive Order ...

  17. Certifications and Professional Development | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Certifications and Professional Development Certifications and Professional Development The following information has been moved to Powerpedia: Acquisition Certifications Program (ACP) Project Management Career Development Program (PMCDP) Aviation Management Green Leases Executive Secretariat Energy Reduction at HQ Real Estate Approvals Documents and Publications Facilities and Infrastructure Federal Advisory Committee Management Freedom of Information Act Financial Assistance Information

  18. Personal Property Management Certification Brochure | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Management Certification Brochure Personal Property Management Certification Brochure Personal Property Management Certification Brochure (404.77 KB) More Documents & Publications Personal Property Briefings Initial Application for FAC-C, Purchasing, Financial Assistance and Property Management Certification Acquisition Career Management Handbook Change - Revised Contracting Officer's Representative Certification (COR)

  19. Digital Sofcell Digital Ultracap joint venture | Open Energy...

    Open Energy Info (EERE)

    Ultracap joint venture Jump to: navigation, search Name: Digital Sofcell - Digital Ultracap joint venture Product: Digital Sofcell will joint venture with Digital Ultracap to...

  20. certification, compliance and enforcement regulations for Commercial

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Refrigeration Equipment (CRE) | Department of Energy certification, compliance and enforcement regulations for Commercial Refrigeration Equipment (CRE) certification, compliance and enforcement regulations for Commercial Refrigeration Equipment (CRE) The current certification, compliance and enforcement regulations for Commercial Refrigeration Equipment (CRE) "simply makes no sense". The regulations define the basic model as any product that has a different energy use or efficiency

  1. Patent Certification - DOE F 2050.11

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    |DOE F 2050.11 (2-87) (Previous GC-792)||OMB Control No. 1910-0800| |PATENT CERTIFICATION| || |||Interim Certification| ||Contractor|||| |||||Final Certification| || | |||| ||DOE Prime and/or Subcontract Nos.|| ||Contractor hereby certifies that:| ||1.|All procedures for identifying and disclosing subject inventions as required by the patent clause of the contract have been followed throughout the reporting period.| ||| ||2.|There were no subcontracts or purchase orders involving research,

  2. Wind Testing and Certification | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Testing and Certification Wind Testing and Certification Recognizing that access to testing facilities is a key enabler of wind technology validation and commercialization, the Wind Program invests in and works with partners on the development of testing facilities that support research and certification of wind turbine technologies at the component, turbine, and wind plant levels. These testing facilities are geographically diverse, located in key wind energy regions, and possess unique testing

  3. CERTIFICATE OF AUTHENTICITY | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CERTIFICATE OF AUTHENTICITY CERTIFICATE OF AUTHENTICITY I hereby certify that this transcript constitutes an accurate record of the full Council meeting of the National Coal Council held on November 14,2008 at the Westin Grand Hotel, Washington, D.C. Tran_001.pdf CERTIFICATE OF AUTHENTICITY (4.5 MB) More Documents & Publications U.S. Offshore Wind Advanced Technology Demonstration Projects Public Meeting Transcript for Offshore Wind Demonstrations Office of Information Resources Office of

  4. Certificate Program Application | Photosynthetic Antenna Research Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Certificate Program Application Certificate Program Application Students who are interested in certificate program should submit the following online application. Please note that other forms are available HERE. Last Name (as it appears in SIS) * First Name (as it appears in SIS) * Student Number * Phone Number Email Address (WUSTL account) * School/College Major(s)/Minor(s) Expected Graduation Date Leave this field blank Submit

  5. CSA International Certification Discussion Hydrogen Technology Workshop |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy CSA International Certification Discussion Hydrogen Technology Workshop CSA International Certification Discussion Hydrogen Technology Workshop Slides from the U.S. Department of Energy Hydrogen Component and System Qualification Workshop held November 4, 2010 in Livermore, CA. csqw_gruss.pdf (1.25 MB) More Documents & Publications Fueling Components Testing and Certification Component and System Qualification Workshop Proceedings CODES & STANDARDS FOR THE

  6. Certifications and Professional Development | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Acquisition Certifications Program (ACP) Project Management Career Development Program (PMCDP) Aviation Management Green Leases Executive Secretariat Energy Reduction at HQ Real ...

  7. Renewable Energy Specifications, Testing and Certification Terms...

    Open Energy Info (EERE)

    of Reference Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Renewable Energy Specifications, Testing and Certification Terms of Reference AgencyCompany...

  8. CERTIFICATE OF AUTHENTICITY | Department of Energy

    Energy Savers [EERE]

    D.C. Tran001.pdf PDF icon CERTIFICATE OF AUTHENTICITY More Documents & Publications U.S. Offshore Wind Advanced Technology Demonstration Projects Public Meeting Transcript for...

  9. Vermont Section 401 Water Quality Certification Application ...

    Open Energy Info (EERE)

    Abstract Application required for Section 401 water quality certification under the Clean Water Act. Form Type ApplicationNotice Form Topic Section 401 Water Quality...

  10. SF-2050.11, Patent Certification

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    subject inventions as required by the patent clause of the con- tract have been ... State none when applicable. PATENT CERTIFICATION TITLE INVENTOR DATE ...

  11. Achievement Award Certificate Templates | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Office of Energy Efficiency and Renewable Energy (EERE) has designed basic templates for awarding certificates of achievement. The templates are Microsoft Word files, and all ...

  12. Solar Renewable Energy Certificates Program (SRECs)

    Broader source: Energy.gov [DOE]

    Solar Renewable Energy Certificates (SRECs) represent the renewable attributes of solar generation, bundled in minimum denominations of one megawatt-hour (MWh) of production. The legislation...

  13. Energy Department Issues Green Building Certification System...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Department Issues Green Building Certification System Final Rule to Support Increased Energy Measurement and Efficient Building Design Energy Department Issues Green...

  14. Arizona Corporation Commission Application for a Certificate...

    Open Energy Info (EERE)

    Application for a Certificate of Convenience and Necessity for Competitive Retail Electricity Services Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal...

  15. Colorado Water Quality Certification General Information | Open...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: Colorado Water Quality Certification General InformationLegal Abstract The Colorado Department of...

  16. Renewable Energy Professional Certificate | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Type SolarWind Contractor Licensing Summary Department of Labor and Training issues Renewable Energy Professional (REP) Certificate to any individual who is currently...

  17. FEMA - National Flood Insurance Program Elevation Certificate...

    Open Energy Info (EERE)

    and Instructions Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: FEMA - National Flood Insurance Program Elevation Certificate and Instructions...

  18. DOE Plan for 2302(c) Certification

    Broader source: Energy.gov [DOE]

    OSC's 2302(c) Certification Program allows federal agencies to meet the statutory obligation to inform their workforces about the rights and remedies available to them under the prohibited...

  19. Ethics and Drug-Free Certification Form

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    NEW EMPLOYEE ORIENTATION ETHICS BRIEFING CERTIFICATION OF ... (Print Name) I hereby certify that I have reviewed the New Employee Orientation information ...

  20. CERTIFICATION DOCKET WESTINGHOUSE ATOMIC POWER DEVELOPMENT PLANT

    Office of Legacy Management (LM)

    ... A survey cf the area of the "L' Building was performed and consisted of gamma-ray ... - Statement of Certification Westinghouse Atomic Power Development Plant East Pittsburgh ...

  1. WICF Certification, Compliance and Enforcement webinar | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    14, 2011 2014-10-06 DOE Certification, Compliance, and Enforcement Overview for Refrigerators, Refrigerator-Freezers, Freezers, Dehumidifiers, Room Air Conditioners, Clothes ...

  2. Verifying the ENERGY STAR Certification Application

    Broader source: Energy.gov [DOE]

    Do you verify commercial building applications for ENERGY STAR certification? This webinar, based on the ENERGY STAR Guide for Licensed Professionals, covers the role of the licensed professional,...

  3. WICF Certification, Compliance and Enforcement webinar

    Broader source: Energy.gov (indexed) [DOE]

    ... is Concurrent with Amended Energy Conservation Standards for Performance-Based ... the Product Specific Certification Statistics Sample Mean (x) Determine which ...

  4. Trainers’ Consortium: SWS/Certification Updates

    Broader source: Energy.gov [DOE]

    This presentation contains recent updates on SWS maintenance and the Home Energy Professional Certifications, given via the Trainers' Consortium call on December 1, 2015.

  5. Workplace Charging Credit for Green Building Certification |...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Leadership in Energy & Environmental Design (LEED) - Created by the U.S. Green Building Council, LEED is a green building certification where organizations can earn up to 100 ...

  6. Solar Equipment Certification | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Certification Summary Minnesota law requires that all active solar space-heating and water-heating systems, sold, offered for sale, or installed on residential and commercial...

  7. Guidelines for Home Energy Professionals Certifications | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Certifications Guidelines for Home Energy Professionals Certifications As part of the Guidelines for Home Energy Professionals project, the U.S. Department of Energy (DOE) collaborated with trainers and technicians from across the home performance industry to develop high-quality, nationally recognized professional certifications. Learn more about the certification blueprint, how to get certified, and resources for training centers below. Certification Blueprint The new certifications

  8. JGI Digital Scavenger Hunt

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    JGI Digital Scavenger Hunt JGI Digital Scavenger Hunt The NERSC webpages are a great resource for New and Old users, so this is the first stop on the JGI Digital Scavenger Hunt....

  9. WAC 463-60 Applications for Site Certification | Open Energy...

    Open Energy Info (EERE)

    WAC 463-60 Applications for Site CertificationLegal Abstract These rules set forth guidelines for preparation of applications for energy facility site certification...

  10. U-182: Microsoft Windows Includes Some Invalid Certificates

    Broader source: Energy.gov [DOE]

    The operating system includes some invalid intermediate certificates. The vulnerability is due to the certificate authorities and not the operating system itself.

  11. Vehicle Certification Test Fuel and Ethanol Flex Fuel Quality...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Vehicle Certification Test Fuel and Ethanol Flex Fuel Quality Vehicle Certification Test Fuel and Ethanol Flex Fuel Quality Breakout Session 2: Frontiers and Horizons Session 2-B: ...

  12. Newest Los Alamos facility receives LEED® Gold certification

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Newest facility receives LEED Gold certification Newest Los Alamos facility receives LEED Gold certification The Radiological Laboratory Utility Office Building is first to ...

  13. Energy Performance Certification of Buildings: A Policy Tool...

    Open Energy Info (EERE)

    Certification of Buildings: A Policy Tool to Improve Energy Efficiency Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Energy Performance Certification of Buildings: A...

  14. Montana 401 Water Quality Certification Webpage | Open Energy...

    Open Energy Info (EERE)

    Certification Webpage Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Montana 401 Water Quality Certification Webpage Abstract Contains information on...

  15. Oregon Section 401 Removal/Fill Certification Webpage | Open...

    Open Energy Info (EERE)

    Certification Webpage Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Oregon Section 401 RemovalFill Certification Webpage Abstract Provides overview...

  16. DOE Resolves Nearly All of its September 2010 Certification Enforcemen...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Nearly All of its September 2010 Certification Enforcement Actions DOE Resolves Nearly All of its September 2010 Certification Enforcement Actions October 19, 2010 - 10:39am ...

  17. 2014-04-28 Issuance: Certification of Commercial HVAC, Water...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    28 Issuance: Certification of Commercial HVAC, Water Heating, and Refrigeration Equipment; Final Rule 2014-04-28 Issuance: Certification of Commercial HVAC, Water Heating, and ...

  18. POLICY GUIDANCE MEMORANDUM #27 Certification Program on Prohibited...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    POLICY GUIDANCE MEMORANDUM 27 Certification Program on Prohibited Personnel Practices and ... POLICY GUIDANCE MEMORANDUM 27 Certification Program on Prohibited Personnel Practices and ...

  19. File:07FDCPURPAQualifyingFacilityCertificationProcess.pdf | Open...

    Open Energy Info (EERE)

    FDCPURPAQualifyingFacilityCertificationProcess.pdf Jump to: navigation, search File File history File usage Metadata File:07FDCPURPAQualifyingFacilityCertificationProcess.pdf Size...

  20. File:07TXBRECGeneratorCertification.pdf | Open Energy Information

    Open Energy Info (EERE)

    7TXBRECGeneratorCertification.pdf Jump to: navigation, search File File history File usage Metadata File:07TXBRECGeneratorCertification.pdf Size of this preview: 463 599 pixels....

  1. EPA Section 401 Water Quality Certification Manual | Open Energy...

    Open Energy Info (EERE)

    Section 401 Water Quality Certification Manual Jump to: navigation, search OpenEI Reference LibraryAdd to library Reference: EPA Section 401 Water Quality Certification Manual...

  2. Webinar December 10: Hydrogen Equipment Certification Guide

    Broader source: Energy.gov [DOE]

    The Fuel Cell Technologies Office will present a live webinar titled "Hydrogen Equipment Certification Guide" on Thursday, December 10, from 1 to 2 p.m. EST. The webinar will introduce the Hydrogen Equipment Certification Guide, a document intended to aid in equipment approval until listed equipment are available for the entirety of equipment and components.

  3. Compliance Certification Enforcement | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Compliance Certification Enforcement Compliance Certification Enforcement DOE enforces the energy and water conservation regulations established by the Office of Energy Efficiency and Renewable Energy, Appliance Standards Program to ensure that residential, commercial and industrial equipment deliver the energy and cost savings required by law. To ensure that all covered products comply with the energy and water conservation standards, the enforcement office reviews manufacturers' compliance

  4. Contractor Earned Value Management System Certification Status | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Contractor Earned Value Management System Certification Status Contractor Earned Value Management System Certification Status Certification Status for major EM Contracts Contractor Earned Value Management System Certification Status (129.04 KB) More Documents & Publications Department of Energy Earned Value Management Survey Results VPP Participant Status EM Major Contracts Awarded Since 2006

  5. Fueling Components Testing and Certification | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fueling Components Testing and Certification Fueling Components Testing and Certification These slides were presented at the Onboard Storage Tank Workshop on April 29, 2010. componentstesting_certification_ostw.pdf (257.49 KB) More Documents & Publications CSA International Certification Discussion Hydrogen Technology Workshop Component and System Qualification Workshop Proceedings CODES & STANDARDS FOR THE HYDROGEN ECONOMY

  6. Quick Guide: Renewable Energy Certificates (RECs) (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2011-07-01

    Guide for Federal agencies considering renewable energy certificate (REC) purchases to fulfill Federal renewable energy requirements.

  7. Certification of a weld produced by friction stir welding

    DOE Patents [OSTI]

    Obaditch, Chris; Grant, Glenn J

    2013-10-01

    Methods, devices, and systems for providing certification of friction stir welds are disclosed. A sensor is used to collect information related to a friction stir weld. Data from the sensor is compared to threshold values provided by an extrinsic standard setting organizations using a certification engine. The certification engine subsequently produces a report on the certification status of the weld.

  8. Digital Sensor Technology

    SciTech Connect (OSTI)

    Ted Quinn; Jerry Mauck; Richard Bockhorst; Ken Thomas

    2013-07-01

    The nuclear industry has been slow to incorporate digital sensor technology into nuclear plant designs due to concerns with digital qualification issues. However, the benefits of digital sensor technology for nuclear plant instrumentation are substantial in terms of accuracy, reliability, availability, and maintainability. This report demonstrates these benefits in direct comparisons of digital and analog sensor applications. It also addresses the qualification issues that must be addressed in the application of digital sensor technology.

  9. Guidelines for developing certification programs for newly generated TRU waste

    SciTech Connect (OSTI)

    Whitty, W.J.; Ostenak, C.A.; Pillay, K.K.S.; Geoffrion, R.R.

    1983-05-01

    These guidelines were prepared with direction from the US Department of Energy (DOE) Transuranic (TRU) Waste Management Program in support of the DOE effort to certify that newly generated TRU wastes meet the Waste Isolation Pilot Plant (WIPP) Waste Acceptance Criteria. The guidelines provide instructions for generic Certification Program preparation for TRU-waste generators preparing site-specific Certification Programs in response to WIPP requirements. The guidelines address all major aspects of a Certification Program that are necessary to satisfy the WIPP Waste Acceptance Criteria and their associated Compliance Requirements and Certification Quality Assurance Requirements. The details of the major element of a Certification Program, namely, the Certification Plan, are described. The Certification Plan relies on supporting data and control documentation to provide a traceable, auditable account of certification activities. Examples of specific parts of the Certification Plan illustrate the recommended degree of detail. Also, a brief description of generic waste processes related to certification activities is included.

  10. SEP and ISO 50001 Certification Process | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and ISO 50001 Certification Process SEP and ISO 50001 Certification Process Superior Energy Performance logo Learn about the certification process for ISO 50001 global energy management systems standard. In addition, learn about the added requirements for Superior Energy Performance® (SEP(tm)) certification. The detailed steps and free online resources outlined below can help your facility reduce energy costs, whether your facility is ready for certification or just beginning to explore energy

  11. FEMP Launches New Training Certificate Series | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Certificate Series FEMP Launches New Training Certificate Series September 24, 2015 - 4:00pm Addthis FEMP Launches New Training Certificate Series The U.S. Department of Energy's Federal Energy Management Program (FEMP) recently launched nine new FEMP certificate training series. Developed in association with FEMP's technical leads, each training certificate series provides a pathway for energy management professionals to enhance their careers through relevant, skills-based online training. Each

  12. Superior Energy Performance Certification Protocol | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Certification Protocol Superior Energy Performance Certification Protocol Superior Energy Performance logo The Superior Energy Performance® (SEP(tm)) Certification Protocol describes the purpose of the SEP program and defines the steps required for participation-from initial application through certification by an ANSI-ANAB accredited Verification Body. Superior Energy Performance Certification Protocol (December 2012) (1.2 MB) More Documents & Publications Becoming a Certified Practitioner

  13. Digital Ultracap Corp formerly Digital Ultracap LLC | Open Energy...

    Open Energy Info (EERE)

    Ultracap Corp formerly Digital Ultracap LLC Jump to: navigation, search Name: Digital Ultracap Corp (formerly Digital Ultracap LLC) Place: Netherlands Product: Partnership between...

  14. Puerto Rico- Solar and Wind Contractor Certification

    Broader source: Energy.gov [DOE]

    In October 2008, the Energy Affairs Administration (EAA) of Puerto Rico adopted regulations for the certification of photovoltaic (PV) systems and installers in response to the passing of Act No....

  15. Hanford Site Transuranic (TRU) Waste Certification Plan

    SciTech Connect (OSTI)

    GREAGER, T.M.

    1999-12-14

    The Hanford Site Transuranic Waste Certification Plan establishes the programmatic framework and criteria with in which the Hanford Site ensures that contract-handled TRU wastes can be certified as compliant with the WIPP WAC and TRUPACT-II SARP.

  16. Hanford Site Transuranic (TRU) Waste Certification Plan

    SciTech Connect (OSTI)

    GREAGER, T.M.

    1999-09-09

    The Hanford Site Transuranic Waste Certification Plan establishes the programmatic framework and criteria within which the Hanford Site ensures that contract-handled TRU wastes can be certified as compliant with the WIPP WAC and TRUPACT-II SARP.

  17. Home Energy Professional Certifications (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2012-11-01

    As the weatherization and home energy upgrade industries expand and gain recognition, the need for a qualified workforce becomes more apparent. The certification component of the Guidelines project was designed to create meaningful and lasting careers for weatherization workers. Intended for experienced home energy professionals, the four new certifications focus on the most common jobs in the industry: energy auditor, retrofit installer technician, crew leader, and quality control inspector.

  18. Microsoft Word - ISO certification article.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NSTec Recommended for ISO Certification in Quality, Environmental Management Systems National Security Technologies (NSTec), the operating contractor for the Nevada Test Site (NTS), has achieved a recommendation for International Organization for Standardization (ISO) certification from Lloyds Registrar Quality Assurance (LRQA). The organization is presented for recognition in both Quality Management and Environmental Management systems. The three-year plan to receive the prestigious ISO 9001

  19. Implementation, Certification and Enforcement | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Appliance & Equipment Standards » Implementation, Certification and Enforcement Implementation, Certification and Enforcement The U.S. Department of Energy (DOE) is authorized by the Energy Policy and Conservation Act of 1975 (as amended) to enforce compliance with the energy and water conservation standards established for certain consumer products and commercial and industrial equipment. To ensure the implementation of the current standards for covered appliances and equipment, DOE has

  20. ISO certification | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Education Organization Contact Us ISO certification ISO ISO Certification The Princeton Plasma Physics Laboratory is ISO certified. ISO 14000 is a family of standards related to environmental management that exists to help organizations (a) minimize how their operations (processes etc.) negatively affect the environment (i.e. cause adverse changes to air, water, or land); (b) comply with applicable laws, regulations, and other environmentally oriented requirements, and (c) continually improve

  1. Certificate of Current Cost and Pricing Data

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CERTIFICATE OF CURRENT COST AND PRICING DATA (OCT 1997) This is to certify that, to the best of my knowledge and belief, the cost or pricing data (as defined in section 15.401 of the Federal Acquisition Regulation (FAR) and required under FAR subsection 15.403-4) submitted, either actually or by specific identification in writing, to the Contracting Officer or to the Contracting Officer's representative in support of * are accurate, complete, and current as of **. This certification includes the

  2. Curtis Wynne Earns Certification as Safety Professional

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Curtis C. Wynne Earns Certification as Safety Professional CARLSBAD, N.M., May 24, 2001 - Curtis C. Wynne of Westinghouse TRU Solutions LLC (WTS) has earned designation as a Certified Safety Professional (CSP). Wynne, a native of Carlsbad, has been a Westinghouse employee since 1992. WTS is the management and operating contractor for the U.S. Department of Energy at the Waste Isolation Pilot Plant. The CSP designation meets the highest national standards for certification and is accredited by

  3. Certification of the Cessna 152 on 100% ethanol

    SciTech Connect (OSTI)

    Shauck, M.E.; Zanin, M.G.

    1997-12-31

    In June 1996, the Renewable Aviation Fuels Development Center (RAFDC) at Baylor University in Waco, Texas, received a Supplemental Type Certificate (STC) for the use of 100% ethanol as a fuel for the Cessna 152, the most popular training aircraft in the world. This is the first certification granted by the Federal Aviation Administration (FAA) for a non-petroleum fuel. Certification of an aircraft on a new fuel requires a certification of the engine followed by a certification of the airframe/engine combination. This paper will describe the FAA airframe certification procedure, the tests required and their outcome using ethanol as an aviation fuel in a Cessna 152.

  4. OSTIblog Articles in the certificate Topic | OSTI, US Dept of Energy Office

    Office of Scientific and Technical Information (OSTI)

    of Scientific and Technical Information certificate

  5. ISO and software quality assurance - licensing and certification of software professionals

    SciTech Connect (OSTI)

    Hare, J.; Rodin, L.

    1997-11-01

    This report contains viewgraphs on licensing and certifing of software professionals. Discussed in this report are: certification programs; licensing programs; why became certified; certification as a condition of empolyment; certification requirements; and examination structures.

  6. Waste certification: Who really is on first?

    SciTech Connect (OSTI)

    Smith, M.A.

    1989-11-01

    Waste certification is the process of stating whether or not a given waste package meets the acceptance criteria of whatever facility is receiving the package. Establishing a program for certification of low-level waste requires coordination of a variety of requirements and limitations, including regulations, physical characteristics of the waste and of the type of radiation emitted by radionuclides in the waste, uncertainty in measurements, quality assurance, and personnel exposures. The goal of such a program must be to provide an acceptable degree of assurance that the waste generating facility will be able to convince the waste receiving facility that individual waste packages do meet the applicable waste acceptance criteria. The preceding paragraph raises many questions: what is an acceptable degree of assurance? What does one have to do to convince a receiving facility? How can the measurement uncertainty be taken into account? This paper attempts to address several of those questions in the context of the development being done in the solid low-level waste (SLLW) certification program at the Oak Ridge National Laboratory (ORNL). First, a brief history of the SLLW certification program at ORNL is presented. The remaining discussions are devoted to considering the problems and pitfalls of implementing a waste certification program, concentrating on such areas as the responsibilities of various organizations and individuals, waste characterization techniques, handling levels of uncertainty, and development of waste acceptance criteria.

  7. Hawaii Water Quality Certification Form | Open Energy Information

    Open Energy Info (EERE)

    Water Quality Certification Form Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: Hawaii Water Quality Certification Form Form Type ApplicationNotice Form...

  8. Idaho Clean Water Act Section 401 Certification Webpage | Open...

    Open Energy Info (EERE)

    Clean Water Act Section 401 Certification Webpage Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Idaho Clean Water Act Section 401 Certification...

  9. T-603: Mac OS X Includes Some Invalid Comodo Certificates

    Office of Energy Efficiency and Renewable Energy (EERE)

    The operating system includes some invalid certificates. The vulnerability is due to the invalid certificates and not the operating system itself. Other browsers, applications, and operating systems are affected.

  10. Secretary Chu Statement on AP1000 Reactor Design Certification...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AP1000 Reactor Design Certification Secretary Chu Statement on AP1000 Reactor Design Certification December 22, 2011 - 3:25pm Addthis Washington, D.C. - U.S. Energy Secretary ...

  11. New Mexico Non-Taxable Transaction Certificate (NM NTTC) Request

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mexico Non-Taxable Transaction Certificate (NM NTTC) Request This form is for vendors of Los Alamos National Laboratory. To request a NM Non-Taxable Transaction Certificate (NTTC),...

  12. Video: FEMP eTraining New Certificate Series | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    describes the FEMP Certificate Series and lists the benefits of taking courses available from the various series topic areas

  13. Hydrogen Equipment Certification Guide Webinar | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Equipment Certification Guide Webinar Hydrogen Equipment Certification Guide Webinar Access the recording and download the presentation slides from the Fuel Cell Technologies Office webinar "Hydrogen Equipment Certification Guide" held on December 10, 2015. Hydrogen Equipment Certification Guide Webinar Slides (2.8 MB) More Documents & Publications H2 Refuel H-Prize Safety Guidance Webinar H2 Refuel H-Prize Safety Guidance Webinar National Hydrogen Safety Training Resource for

  14. NE-24 Gilman Hall, University of California, Certification Documentation

    Office of Legacy Management (LM)

    Gilman Hall, University of California, Certification Documentation Berkeley, California, Conditional Verlette Gatlin, MA-232 I am attaching for entry into the Public Document Room, two copies of the subject documentation. These documents are the backup data for the conditional certification that the site is radiologically acceptable for restricted use as noted in the certification statement published in the Federal Register. Inasmuch as the conditional certification is made public through the

  15. Home Energy Professional Certifications Fact Sheet | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Home Energy Professional Certifications Fact Sheet Home Energy Professional Certifications Fact Sheet As the weatherization and home energy upgrade industries expand and gain recognition, the need for a qualified workforce becomes more apparent. The certification component of the Guidelines project was designed to create meaningful and lasting careers for weatherization workers. Intended for experienced home energy professionals, the four new certifications focus on the most common jobs in the

  16. ISSUANCE 2015-12-22: ENERGY CONSERVATION PROGRAM: CERTIFICATION AND

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ENFORCEMENT; Notice of Proposed Rule | Department of Energy 2: ENERGY CONSERVATION PROGRAM: CERTIFICATION AND ENFORCEMENT; Notice of Proposed Rule ISSUANCE 2015-12-22: ENERGY CONSERVATION PROGRAM: CERTIFICATION AND ENFORCEMENT; Notice of Proposed Rule This document is the ENERGY CONSERVATION PROGRAM: CERTIFICATION AND ENFORCEMENT; Notice of Proposed Rule. Import Declaration NOPR.pdf (386.36 KB) More Documents & Publications ISSUANCE 2016-05-06: Energy Conservation Program: Certification

  17. Certifications and Assurances for Use with SF-424

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 U.S. DEPARTMENT OF ENERGY FINANCIAL ASSISTANCE CERTIFICATIONS AND ASSURANCES FOR USE WITH SF 424 Applicant: Solicitation No.: DE- The following certifications and assurances must be completed and submitted with each application for financial assistance. The name of the person responsible for making the certifications and assurances must be typed in the signature block on the forms. Certifications Regarding Lobbying; Debarment, Suspension and Other Responsibility Matters; and Drug Free

  18. Certification of DOE Reading Rooms | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Certification of DOE Reading Rooms Certification of DOE Reading Rooms Certification of DOE Reading Rooms by Ingrid Kolb, Chief FOIA Officer, October, 17, 2008. (57.79 KB) More Documents & Publications Memorandum from Secretary Moniz on the Freedom of Information Act (FOIA) Before the Subcommittee on National Parks - Senate Committee on Energy and Natural Resources DRAFT 2012 DOE Project Management Workshop Agenda

  19. Who Owns Renewable Energy Certificates?

    SciTech Connect (OSTI)

    Holt, Edward; Wiser, Ryan; Bolinger, Mark

    2006-06-01

    Renewable energy certificates (RECs) are tradable instruments that convey the attributes of a renewable energy generator and the right to make certain claims about energy purchases. RECs first appeared in US markets in the late 1990s and are particularly important in states that accept or require them as evidence of compliance with renewables portfolio standards (RPS). The emergence of RECs as a tradable commodity has made utilities, generators, and regulators increasingly aware of the need to specify who owns the RECs in energy transactions. In voluntary transactions, most agree that the question of REC ownership can and should be negotiated privately between the buyer and the seller, and should be clearly established by contract. Claims about purchasing or using renewable energy should only be made if REC ownership can be documented. In many other cases, however, renewable energy transactions are either mandated or encouraged through state or federal policy. Because of the recent appearance of RECs, legislation and regulation mandating the purchase of renewable energy has sometimes been silent on the disposition of the RECs associated with that generation. Furthermore, some renewable energy contracts pre-date the existence of RECs, and therefore do not address REC ownership. In both of these instances, the issue of REC ownership must often be answered by legislative or regulatory authorities. The resulting uncertainty in REC ownership has hindered the development of robust REC markets and has, in some cases, led to contention between buyers and sellers of renewable generation. This article, which is based on a longer Berkeley Lab report, reviews federal and state efforts to clarify the ownership of RECs from Qualifying Facilities (QFs) that sell their generation under the Public Utility Regulatory Policies Act (PURPA) of 1978. The full report also addresses state efforts to clarify REC ownership in two other situations, customer-owned generation that benefits

  20. Digital Sensor Technology

    SciTech Connect (OSTI)

    Thomas, Ken D.; Quinn, Edward L.; Mauck, Jerry L.; Bockhorst, Richard M.

    2015-02-01

    The nuclear industry has been slow to incorporate digital sensor technology into nuclear plant designs due to concerns with digital qualification issues. However, the benefits of digital sensor technology for nuclear plant instrumentation are substantial in terms of accuracy and reliability. This paper, which refers to a final report issued in 2013, demonstrates these benefits in direct comparisons of digital and analog sensor applications. Improved accuracy results from the superior operating characteristics of digital sensors. These include improvements in sensor accuracy and drift and other related parameters which reduce total loop uncertainty and thereby increase safety and operating margins. An example instrument loop uncertainty calculation for a pressure sensor application is presented to illustrate these improvements. This is a side-by-side comparison of the instrument loop uncertainty for both an analog and a digital sensor in the same pressure measurement application. Similarly, improved sensor reliability is illustrated with a sample calculation for determining the probability of failure on demand, an industry standard reliability measure. This looks at equivalent analog and digital temperature sensors to draw the comparison. The results confirm substantial reliability improvement with the digital sensor, due in large part to ability to continuously monitor the health of a digital sensor such that problems can be immediately identified and corrected. This greatly reduces the likelihood of a latent failure condition of the sensor at the time of a design basis event. Notwithstanding the benefits of digital sensors, there are certain qualification issues that are inherent with digital technology and these are described in the report. One major qualification impediment for digital sensor implementation is software common cause failure (SCCF).

  1. Digital rotation measurement unit

    DOE Patents [OSTI]

    Sanderson, S.N.

    1983-09-30

    A digital rotation indicator is disclosed for monitoring the position of a valve member having a movable actuator. The indicator utilizes mercury switches adapted to move in cooperation with the actuator. Each of the switches produces an output as it changes state when the actuator moves. A direction detection circuit is connected to the switches to produce a first digital signal indicative of the direction of rotation of the actuator. A count pulse generating circuit is also connected to the switches to produce a second digital pulse signal having count pulses corresponding to a change of state of any of the mercury switches. A reset pulse generating circuit is provided to generate a reset pulse each time a count pulse is generated. An up/down counter is connected to receive the first digital pulse signal and the second digital pulse signal and to count the pulses of the second digital pulse signal either up or down depending upon the instantaneous digital value of the first digital signal whereby a running count indicative of the movement of the actuator is maintained.

  2. Security Equipment and Systems Certification Program (SESCP)

    SciTech Connect (OSTI)

    Steele, B.J.; Papier, I.I.

    1996-06-20

    Sandia National Laboratories (SNL) and Underwriters Laboratories, Inc., (UL) have jointly established the Security Equipment and Systems Certification Program (SESCP). The goal of this program is to enhance industrial and national security by providing a nationally recognized method for making informed selection and use decisions when buying security equipment and systems. The SESCP will provide a coordinated structure for private and governmental security standardization review. Members will participate in meetings to identify security problems, develop ad-hoc subcommittees (as needed) to address these identified problems, and to maintain a communications network that encourages a meaningful exchange of ideas. This program will enhance national security by providing improved security equipment and security systems based on consistent, reliable standards and certification programs.

  3. JGI Digital Scavenger Hunt

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    JGI Digital Scavenger Hunt JGI Digital Scavenger Hunt The NERSC webpages are a great resource for New and Old users, so this is the first stop on the JGI Digital Scavenger Hunt. Here is your first clue: 1) Log on to Genepool (ssh -Y genepool.nersc.gov) 2) Load the JAMO (dev) module (module load jamo/dev) 3) Run the following sequence of commands and answer the questions: genpool10: ~ $ jamo What is the third letter of the sixth jamo command in the help menu? genepool10: ~ $ jamo info What is the

  4. Digital sonar system

    DOE Patents [OSTI]

    Young, Kenneth K.; Wilkes, R. Jeffrey

    1995-01-01

    A transponder of an active digital sonar system identifies a multifrequency underwater activating sonar signal received from a remote sonar transmitter. The transponder includes a transducer that receives acoustic waves, including the activating sonar signal, and generates an analog electrical receipt signal. The analog electrical receipt signal is converted to a digital receipt signal and cross-correlated with a digital transmission signal pattern corresponding to the activating sonar signal. A relative peak in the cross-correlation value is indicative of the activating sonar signal having been received by the transponder. In response to identifying the activating sonar signal, the transponder transmits a responding multifrequency sonar signal.

  5. Digital sonar system

    DOE Patents [OSTI]

    Young, K.K.; Wilkes, R.J.

    1995-11-21

    A transponder of an active digital sonar system identifies a multifrequency underwater activating sonar signal received from a remote sonar transmitter. The transponder includes a transducer that receives acoustic waves, including the activating sonar signal, and generates an analog electrical receipt signal. The analog electrical receipt signal is converted to a digital receipt signal and cross-correlated with a digital transmission signal pattern corresponding to the activating sonar signal. A relative peak in the cross-correlation value is indicative of the activating sonar signal having been received by the transponder. In response to identifying the activating sonar signal, the transponder transmits a responding multifrequency sonar signal. 4 figs.

  6. Fast transient digitizer

    DOE Patents [OSTI]

    Villa, Francesco

    1982-01-01

    Method and apparatus for sequentially scanning a plurality of target elements with an electron scanning beam modulated in accordance with variations in a high-frequency analog signal to provide discrete analog signal samples representative of successive portions of the analog signal; coupling the discrete analog signal samples from each of the target elements to a different one of a plurality of high speed storage devices; converting the discrete analog signal samples to equivalent digital signals; and storing the digital signals in a digital memory unit for subsequent measurement or display.

  7. Certificate in Environmental Monitoring Program Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Certificate in Environmental Monitoring Program Description Since a primary goal of the Neighborhood Environmental Watch Network (NEWNET) project is to provide information to the public, it is fitting that there are appropriate education programs. NEWNET has collaborated with several local high schools and colleges by providing them with local NEWNET stations. Some teaching curricula include a study of radiation and detection, data acquisition and plotting, meteorology, or uses of computers.

  8. Energy Efficient Digital Networks

    Broader source: Energy.gov (indexed) [DOE]

    and rising * About 7% of all U.S. electricity consumption -Much of this digitally networked already Our Future? Media room in high-end home Electronics are Different - Service ...

  9. Digital ac monitor

    DOE Patents [OSTI]

    Hart, George W.; Kern, Jr., Edward C.

    1987-06-09

    An apparatus and method is provided for monitoring a plurality of analog ac circuits by sampling the voltage and current waveform in each circuit at predetermined intervals, converting the analog current and voltage samples to digital format, storing the digitized current and voltage samples and using the stored digitized current and voltage samples to calculate a variety of electrical parameters; some of which are derived from the stored samples. The non-derived quantities are repeatedly calculated and stored over many separate cycles then averaged. The derived quantities are then calculated at the end of an averaging period. This produces a more accurate reading, especially when averaging over a period in which the power varies over a wide dynamic range. Frequency is measured by timing three cycles of the voltage waveform using the upward zero crossover point as a starting point for a digital timer.

  10. Digital ac monitor

    DOE Patents [OSTI]

    Hart, G.W.; Kern, E.C. Jr.

    1987-06-09

    An apparatus and method is provided for monitoring a plurality of analog ac circuits by sampling the voltage and current waveform in each circuit at predetermined intervals, converting the analog current and voltage samples to digital format, storing the digitized current and voltage samples and using the stored digitized current and voltage samples to calculate a variety of electrical parameters; some of which are derived from the stored samples. The non-derived quantities are repeatedly calculated and stored over many separate cycles then averaged. The derived quantities are then calculated at the end of an averaging period. This produces a more accurate reading, especially when averaging over a period in which the power varies over a wide dynamic range. Frequency is measured by timing three cycles of the voltage waveform using the upward zero crossover point as a starting point for a digital timer. 24 figs.

  11. Sloan digital sky survey

    SciTech Connect (OSTI)

    Kent, S.M.; Stoughton, C.; Newberg, H.; Loveday, J.; Petravick, D.; Gurbani, V.; Berman, E.; Sergey, G.; Lupton, R.

    1994-04-01

    The Sloan Digital Sky Survey will produce a detailed digital photometric map of half the northern sky to about 23 magnitude using a special purpose wide field 2.5 meter telescope. From this map we will select {approximately} 10{sup 6} galaxies and 10{sup 5} quasars, and obtain high resolution spectra using the same telescope. The imaging catalog will contain 10{sup 8} galaxies, a similar number of stars, and 10{sup 6} quasar candidates.

  12. NREL Earns Prestigious Safety and Environmental Certifications - News

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Releases | NREL Earns Prestigious Safety and Environmental Certifications February 15, 2012 The U.S. Department of Energy's National Renewable Energy Laboratory (NREL) has received three significant certifications demonstrating the lab's commitment to the environment, safety, and management excellence. Certifications earned by NREL include: ISO 14001:2004 (environment); ISO 9001:2008 (quality); and OHSAS 18001 (health and safety). In July 2011, a team of external auditors from NSF

  13. New Employee Orientation - Ethics Briefing Certification | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Ethics Briefing Certification New Employee Orientation - Ethics Briefing Certification Required Ethics Certification form where a new employee indicates that they have reviewed the New Employee Orientation information on the Standards of Ethical Conduct for Employees in the Executive Branch, 5 C.F. R. Part 2635, and the DOE 3792.3 Drug-Free Federal Workplace Testing Program. A employee signed copy of this form is required for the new employees orientation. Ethics and Drug-Free

  14. Certification and Listing Process and Procedures Workshop | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Certification and Listing Process and Procedures Workshop Certification and Listing Process and Procedures Workshop Slides from the U.S. Department of Energy Hydrogen Component and System Qualification Workshop held November 4, 2010 in Livermore, CA. csqw_mahnken.pdf (246.25 KB) More Documents & Publications Component and System Qualification Workshop Proceedings CSA International Certification Discussion Hydrogen Technology Workshop U.S. Department of Energy Onboard Storage Tank

  15. Zero Energy Ready Home Certificate Examples | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Certificate Examples Zero Energy Ready Home Certificate Examples These certificates are printed from RESNET Accredited Software, examples from REM/Rate and from EnergyGauge. Remrate Cert.pdf (138.35 KB) More Documents & Publications 2016 U.S. Department of Energy Race to Zero Student Design Competition Guide Review of Selected Home Energy Auditing Tools Overview of Existing Home Energy Labels

  16. Remedial Action Certification Docket - Sodium Reactor Experiment (SRE)

    Office of Legacy Management (LM)

    c~-?i-- I ,3-l Remedial Action Certification Docket - Sodium Reactor Experiment (SRE) .Complex and the Hot Cave Facility (Bldg. 003), Santa Susana ,Fie!d Laboratory, Chatsworth, California ..:'..~::Yerlette Gatl in, MA-232 I am attaching for entry into the Public Document Room, one copy of the N -23 subject documentat ion. These documents are the backup data for the certification that the facilfties are radiologically acceptable for b- unrestricted use as noted in the certification statement

  17. Memorandum, Clarification of Requirements for Certification in Title 10

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Code of Federal Regulations Part 712, Human Reliability Program | Department of Energy Clarification of Requirements for Certification in Title 10 Code of Federal Regulations Part 712, Human Reliability Program Memorandum, Clarification of Requirements for Certification in Title 10 Code of Federal Regulations Part 712, Human Reliability Program August 20, 2013 Clarification of Requirements for Certification in Title 10 Code of Federal Regulations Part 712, Human Reliability Program

  18. ORISE: EPA awards ENERGY STAR® certification to ORISE building for

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    superior energy efficiency ORISE building earns EPA's ENERGY STAR® certification for superior energy efficiency FOR IMMEDIATE RELEASE March 16, 2016 FY16-16 Chad Becker, Eddy Whitson and Kevin Fritts with EPA ENERGY STAR certificate Left to Right: Director of Facilities and Transportation Department Chad Becker, Facilities Management Services Manager Eddy Whitson and Sustainability Manager Kevin Fritts display the new EPA ENERGY STAR® certification for the ORISE Facilities and

  19. Fuel Cell Product Certification/Listing Lessons Learned | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Product Certification/Listing Lessons Learned Fuel Cell Product Certification/Listing Lessons Learned Slides from the U.S. Department of Energy Hydrogen Component and System Qualification Workshop held November 4, 2010 in Livermore, CA. csqw_radley.pdf (832.63 KB) More Documents & Publications Component and System Qualification Workshop Proceedings The Fuel Cell Mobile Light Project - A DOE Market Transformation Activity CSA International Certification Discussion Hydrogen

  20. Green Building Certification Systems Requirement for New Federal Buildings

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Major Renovations of Federal Buildings Final Rule | Department of Energy Green Building Certification Systems Requirement for New Federal Buildings and Major Renovations of Federal Buildings Final Rule Green Building Certification Systems Requirement for New Federal Buildings and Major Renovations of Federal Buildings Final Rule Document details the Green Building Certification Systems Requirement for New Federal Buildings and Major Renovations of Federal Buildings' Final Rule for 10 CFR

  1. Preparing for the Quality Control Inspector Certification Exam | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Preparing for the Quality Control Inspector Certification Exam Preparing for the Quality Control Inspector Certification Exam This presentation, prepared by the Building Performance Center and the Washington Department of Commerce, identifies how individuals can better prepare for the Home Energy Professional Quality Control Inspector Certification Exam. preparing_for_the_qci_ exam_4_18_14.pptx (17.26 MB) More Documents & Publications QCI Exam Test-Taking Tips from Community

  2. Certificate in Renewable Energy and the Environment | Photosynthetic

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Antenna Research Center Certificate in Renewable Energy and the Environment Certificate in Renewable Energy and the Environment Awarded by PARC/I-CARES, the Certificate in Renewable Energy and the Environment provides an organized channel for students who wish to pursue interdisciplinary energy studies in addition to their selected major and/or minor. The program combines academic courses, outreach interactions, hands-on research experiences, and networking opportunities. Courses are

  3. Buildings Energy Data Book: 9.3 Certification Programs

    Buildings Energy Data Book [EERE]

    1 North American Technician Excellence Program (1) Individuals Certified: Number of Certificates: Certifications Air Conditioning Air Distribution Heat Pump (3) Gas Furnace Oil Furnace Hydronics Gas Hydronics Oil Light Commercial Refrigeration Commercial Refrigeration Senior Technician Census Region South Midwest West Northeast Canada Note(s): Source(s): Personal Communication, Kathy Corr, North American Technical Excellence, February 16, 2012. 40% 26% 19% 14% 1% 1)Third party certification

  4. Newest Los Alamos facility receives LEED® Gold certification

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Newest facility receives LEED® Gold certification Newest Los Alamos facility receives LEED® Gold certification The Radiological Laboratory Utility Office Building is first to achieve both the Leadership in Energy and Environmental Design status and LEED Gold certification. June 13, 2012 Radiological Laboratory Utility Office Building Radiological Laboratory Utility Office Building Contact Kim Powell Communications Office (505) 695-6159 Email LOS ALAMOS, New Mexico, June 13, 2012-Los Alamos

  5. Vehicle Certification Test Fuel and Ethanol Flex Fuel Quality | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Vehicle Certification Test Fuel and Ethanol Flex Fuel Quality Vehicle Certification Test Fuel and Ethanol Flex Fuel Quality Breakout Session 2: Frontiers and Horizons Session 2-B: End Use and Fuel Certification Paul Machiele, Center Director for Fuel Programs, Office of Transportation & Air Quality, U.S. Environmental Protection Agency b13_machiele_2-b.pdf (124.12 KB) More Documents & Publications High Octane Fuels Can Make Better Use of Renewable Transportation Fuels The

  6. ISSUANCE 2016-02-26: ENERGY CONSERVATION PROGRAM: CERTIFICATION AND

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ENFORCEMENT-IMPORT DATA COLLECTION; NOTICE OF EXTENSION OF COMMENT PERIOD | Department of Energy ENERGY CONSERVATION PROGRAM: CERTIFICATION AND ENFORCEMENT-IMPORT DATA COLLECTION; NOTICE OF EXTENSION OF COMMENT PERIOD ISSUANCE 2016-02-26: ENERGY CONSERVATION PROGRAM: CERTIFICATION AND ENFORCEMENT-IMPORT DATA COLLECTION; NOTICE OF EXTENSION OF COMMENT PERIOD This document is the ENERGY CONSERVATION PROGRAM: CERTIFICATION AND ENFORCEMENT-IMPORT DATA COLLECTION; Notice of extension of comment

  7. ISSUANCE 2016-05-06: Energy Conservation Program: Certification and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Enforcement-Import Data Collection; Reopening of the Comment Period | Department of Energy Certification and Enforcement-Import Data Collection; Reopening of the Comment Period ISSUANCE 2016-05-06: Energy Conservation Program: Certification and Enforcement-Import Data Collection; Reopening of the Comment Period This document is the Energy Conservation Program: Certification and Enforcement-Import Data Collection; Reopening of the Comment Period. Import Declaration NOPR Reopening Comment

  8. Civil Penalty Actions For Certification Violations Resolved | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Civil Penalty Actions For Certification Violations Resolved Civil Penalty Actions For Certification Violations Resolved May 6, 2010 - 12:39pm Addthis Today, the Department of Energy announced that it had resolved civil penalty actions against four showerhead manufacturers for having violated the Department's water conservation certification regulations. To resolve these actions Zoe Industries, Altmans Products LLC, EZ-FLO International, and Watermark Designs Ltd. have now certified

  9. Microsoft Word - Smart Grid Certification and Labeling Program...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... The Green Building Certification Institute also offers individuals LEED educational materials and credentials (as LEED Accredited Professionals) for those who work in the industry ...

  10. Hawaii Clean Energy Initiative Certificate of Public Convenience...

    Open Energy Info (EERE)

    Reference LibraryAdd to library PermittingRegulatory Guidance - Instructions: Hawaii Clean Energy Initiative Certificate of Public Convenience and Necessity Permit...

  11. Appliance Standards Update and Review of Certification, Compliance...

    Energy Savers [EERE]

    for ASHRAE Conference, January 31, 2011 Appliance Standards Update and Review of Certification, Compliance and Enforcement Powerpoint Presentation for ASHRAE Conference, ...

  12. Vermont Section 401 Water Quality Certification Program | Open...

    Open Energy Info (EERE)

    navigation, search OpenEI Reference LibraryAdd to library Web Site: Vermont Section 401 Water Quality Certification Program Abstract Vermont Agency of Natural Resource's...

  13. Texas PUCT Substantive Rule 25.101, Certification Criteria, Electric...

    Open Energy Info (EERE)

    Help Apps Datasets Community Login | Sign Up Search Page Edit with form History Texas PUCT Substantive Rule 25.101, Certification Criteria, Electric Substantive Rules Jump...

  14. EPA 401 Water Quality Certification website | Open Energy Information

    Open Energy Info (EERE)

    OtherOther: EPA 401 Water Quality Certification websiteLegal Abstract The United States Environmental Protection Agency (EPA) provides various information and resources related...

  15. Guidelines for Applicants for Energy Facility Site Certificates...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: Guidelines for Applicants for Energy Facility Site CertificatesPermitting...

  16. EPA Handbook on 401 Water Quality Certifications | Open Energy...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: EPA Handbook on 401 Water Quality CertificationsPermittingRegulatory...

  17. Idaho Section 401 Certification Guidance | Open Energy Information

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: Idaho Section 401 Certification GuidancePermittingRegulatory GuidanceGuide...

  18. Certification of Completion of Level-2 Milestone 405: Deploy...

    Office of Scientific and Technical Information (OSTI)

    Environment Citation Details In-Document Search Title: Certification of Completion of Level-2 Milestone 405: Deploy Next-Generation Data Management and Analysis Environment ...

  19. Policy Flash 2013-54 Acquisition Certification Program Handbook...

    Broader source: Energy.gov (indexed) [DOE]

    Acquisition Certifications Program Handbook 4th Edition Questions concerning this policy flash should be directed to Linda Ott of the Office Acquistion and Project Management,...

  20. Clean Water Act Section 401 Certification Webpage | Open Energy...

    Open Energy Info (EERE)

    Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Clean Water Act Section 401 Certification Webpage Author United State Environmental Protection...

  1. Clean Water Act Section 401 Water Quality Certification: A Water...

    Open Energy Info (EERE)

    Certification: A Water Quality Protection Tool for States and Tribes Jump to: navigation, search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - Guide...

  2. Clean Water Act Section 401 Water Quality Certification A Water...

    Open Energy Info (EERE)

    Certification A Water Quality Protection Tool for States and Tribes Jump to: navigation, search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - Guide...

  3. NNSA and Defense Nuclear Facilities Safety Board certifications...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    allocated funding NNSA and Defense Nuclear Facilities Safety Board certifications free up 47 million in previously allocated funding The DNFSB and NNSA required the CMRR...

  4. New Year, New Certification Opportunities for Home Energy Workers...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    These new certifications cover the four most common home energy and weatherization job ... Trainees practice techniques on miniature model homes at the New River Center for Energy ...

  5. Green Building Certification Systems Requirement for New Federal...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Green Building Certification Systems Requirement for New Federal Buildings and Major Renovations of Federal Buildings Final Rule Fossil Fuel-Generated Energy Consumption Reduction ...

  6. WSDE 401 Water Quality Certification webpage | Open Energy Information

    Open Energy Info (EERE)

    Not Provided DOI Not Provided Check for DOI availability: http:crossref.org Online Internet link for WSDE 401 Water Quality Certification webpage Citation Washington State...

  7. Certification of Completion of Level-2 Milestone 405: Deploy...

    Office of Scientific and Technical Information (OSTI)

    Data Management and Analysis Environment Citation Details In-Document Search Title: Certification of Completion of Level-2 Milestone 405: Deploy Next-Generation Data Management and ...

  8. Iowa Water and Wastewater Operators Seek SEP Certification in...

    Energy Savers [EERE]

    Technical Assistance Superior Energy Performance Iowa Water and Wastewater Operators Seek SEP Certification in New Pilot Program Iowa Water and Wastewater Operators Seek SEP ...

  9. Policy Flash 2013-25 Acquisition Certifications Program Handbook...

    Broader source: Energy.gov (indexed) [DOE]

    downloadsacquisition-certifications-program-handbook Questions concerning this policy flash should be directed to Linda Ott of the Office of Acquisition and Project...

  10. Texas UST Registration and Self-Certification Form | Open Energy...

    Open Energy Info (EERE)

    Retrieved from "http:en.openei.orgwindex.php?titleTexasUSTRegistrationandSelf-CertificationForm&oldid791711" Feedback Contact needs updating Image needs...

  11. Photovoltaic module certification/laboratory accreditation criteria development

    SciTech Connect (OSTI)

    Osterwald, C.R. [National Renewable Energy Lab., Golden, CO (United States); Hammond, R.L.; Wood, B.D.; Backus, C.E.; Sears, R.L. [Arizona State Univ., Tempe, AZ (United States); Zerlaut, G.A. [SC-International Inc., Phoenix, AZ (United States); D`Aiello, R.V. [RD Associates, Tempe, AZ (United States)

    1995-04-01

    This document provides an overview of the structure and function of typical product certification/laboratory accreditation programs. The overview is followed by a model program which could serve as the basis for a photovoltaic (PV) module certification/laboratory accreditation program. The model covers quality assurance procedures for the testing laboratory and manufacturer, third-party certification and labeling, and testing requirements (performance and reliability). A 30-member Criteria Development Committee was established to guide, review, and reach a majority consensus regarding criteria for a PV certification/laboratory accreditation program. Committee members represented PV manufacturers, end users, standards and codes organizations, and testing laboratories.

  12. File:07CAAPlantCommissioningProcessApplicationForCertification...

    Open Energy Info (EERE)

    7CAAPlantCommissioningProcessApplicationForCertification.pdf Jump to: navigation, search File File history File usage Metadata File:07CAAPlantCommissioningProcessApplicationForCert...

  13. NMOCD - Form G-104 - Certificate of Compliance and Authorization...

    Open Energy Info (EERE)

    Jump to: navigation, search OpenEI Reference LibraryAdd to library General: NMOCD - Form G-104 - Certificate of Compliance and Authorization to Produce Geothermal Resources Author...

  14. Texas General Land Office Construction Certificate and Dune Protection...

    Open Energy Info (EERE)

    LibraryAdd to library PermittingRegulatory Guidance - Checklist: Texas General Land Office Construction Certificate and Dune Protection Permit Requirements...

  15. Washington 401 Water Quality Certification JARPA Process | Open...

    Open Energy Info (EERE)

    401 Water Quality Certification JARPA Process Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: Washington 401 Water Quality...

  16. Microsoft Word - Transmittal of the Certification Audit Report...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Drive East, Bldg. 1 Santa Fe, New Mexico 87505-6303 SUBJECT: Transmittal of the Certification Audit Report for the Argonne National LaboratoryCentral Characterization Project,...

  17. DOE/Mitsubishi Enter Consent Decree Dismissing Claims of Certification...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    certification violations in return for a 5000 voluntary contribution that will be made on Mitsubishi's behalf by the Air-Conditioning, Heating and Refrigeration Institute (AHRI). ...

  18. NREL: Energy Analysis - Renewable Energy Certificate and Green...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Renewable Energy Certificate and Green Power Markets NREL's market analysis group examines the implications of customer choice on the market demand for renewable energy as well as ...

  19. Green Building Certification Systems Requirement for New Federal...

    Office of Environmental Management (EM)

    Green Building Certification Systems Requirement for New Federal Buildings and Major Renovations of Federal Buildings OIRA Comparison Document Fossil Fuel-Generated Energy ...

  20. Digital Actuator Technology

    SciTech Connect (OSTI)

    Ken Thomas; Ted Quinn; Jerry Mauck; Richard Bockhorst

    2014-09-01

    There are significant developments underway in new types of actuators for power plant active components. Many of these make use of digital technology to provide a wide array of benefits in performance of the actuators and in reduced burden to maintain them. These new product offerings have gained considerable acceptance in use in process plants. In addition, they have been used in conventional power generation very successfully. This technology has been proven to deliver the benefits promised and substantiate the claims of improved performance. The nuclear industry has been reluctant to incorporate digital actuator technology into nuclear plant designs due to concerns due to a number of concerns. These could be summarized as cost, regulatory uncertainty, and a certain comfort factor with legacy analog technology. The replacement opportunity for these types of components represents a decision point for whether to invest in more modern technology that would provide superior operational and maintenance benefits. Yet, the application of digital technology has been problematic for the nuclear industry, due to qualification and regulatory issues. With some notable exceptions, the result has been a continuing reluctance to undertake the risks and uncertainties of implementing digital actuator technology when replacement opportunities present themselves. Rather, utilities would typically prefer to accept the performance limitations of the legacy analog actuator technologies to avoid impacts to project costs and schedules. The purpose of this report is to demonstrate that the benefits of digital actuator technology can be significant in terms of plant performance and that it is worthwhile to address the barriers currently holding back the widespread development and use of this technology. It addresses two important objectives in pursuit of the beneficial use of digital actuator technology for nuclear power plants: 1. To demonstrate the benefits of digital actuator

  1. Digital field ion microscopy

    SciTech Connect (OSTI)

    Sijbrandij, S.J.; Russell, K.F.; Miller, M.K.; Thomson, R.C.

    1998-01-01

    Due to environmental concerns, there is a trend to avoid the use of chemicals needed to develop negatives and to process photographic paper, and to use digital technologies instead. Digital technology also offers the advantages that it is convenient, as it enables quick access to the end result, allows image storage and processing on computer, allows rapid hard copy output, and simplifies electronic publishing. Recently significant improvements have been made to the performance and cost of camera-sensors and printers. In this paper, field ion images recorded with two digital cameras of different resolution are compared to images recorded on standard 35 mm negative film. It should be noted that field ion images exhibit low light intensity and high contrast. Field ion images were recorded from a standard microchannel plate and a phosphor screen and had acceptance angles of {approximately} 60{degree}. Digital recordings were made with a Digital Vision Technologies (DVT) MICAM VHR1000 camera with a resolution of 752 x 582 pixels, and a Kodak DCS 460 digital camera with a resolution of 3,060 x 2,036 pixels. Film based recordings were made with Kodak T-MAX film rated at 400 ASA. The resolving power of T-MAX film, as specified by Kodak, is between 50 and 125 lines per mm, which corresponds to between 1,778 x 1,181 and 4,445 x 2,953 pixels, i.e. similar to that from the DCS 460 camera. The intensities of the images were sufficient to be recorded with standard fl:1.2 lenses with exposure times of less than 2 s. Many digital cameras were excluded from these experiments due to their lack of sensitivity or the inability to record a full frame image due to the fixed working distance defined by the vacuum system. The digital images were output on a Kodak Digital Science 8650 PS dye sublimation color printer (300 dpi). All field ion micrographs presented were obtained from a Ni-Al-Be specimen.

  2. Prices and Certificates | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Prices and Certificates Print Text Size: A A A FeedbackShare Page Domestic Pricing Uranium and Thorium Ores and Impurity Reference Materials Price List and Certificates Uranium ...

  3. Media Promotes SEP Certification and DOE eGuide to Help Facilities...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technical Assistance Superior Energy Performance Media Promotes SEP Certification and DOE eGuide to Help Facilities Reduce Energy Use and Costs Media Promotes SEP Certification ...

  4. Digital optical conversion module

    DOE Patents [OSTI]

    Kotter, Dale K.; Rankin, Richard A.

    1991-02-26

    A digital optical conversion module used to convert an analog signal to a computer compatible digital signal including a voltage-to-frequency converter, frequency offset response circuitry, and an electrical-to-optical converter. Also used in conjunction with the digital optical conversion module is an optical link and an interface at the computer for converting the optical signal back to an electrical signal. Suitable for use in hostile environments having high levels of electromagnetic interference, the conversion module retains high resolution of the analog signal while eliminating the potential for errors due to noise and interference. The module can be used to link analog output scientific equipment such as an electrometer used with a mass spectrometer to a computer.

  5. Digital optical conversion module

    DOE Patents [OSTI]

    Kotter, D.K.; Rankin, R.A.

    1988-07-19

    A digital optical conversion module used to convert an analog signal to a computer compatible digital signal including a voltage-to-frequency converter, frequency offset response circuitry, and an electrical-to-optical converter. Also used in conjunction with the digital optical conversion module is an optical link and an interface at the computer for converting the optical signal back to an electrical signal. Suitable for use in hostile environments having high levels of electromagnetic interference, the conversion module retains high resolution of the analog signal while eliminating the potential for errors due to noise and interference. The module can be used to link analog output scientific equipment such as an electrometer used with a mass spectrometer to a computer. 2 figs.

  6. Certifications for use with DOE Loan Guarantees | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for use with DOE Loan Guarantees Certifications for use with DOE Loan Guarantees Certifications for Use with DOE Loan Guarantees (131.65 KB) More Documents & Publications Fixed Rate Agreement Interested Parties - Memo on Halting Title XVII Nuclear Loan Guarantees in MD, SC, GA, and TX Floating Rate Agreement

  7. Digital Image Correlation Engine

    SciTech Connect (OSTI)

    Turner, Dan; Crozier, Paul; Reu, Phil

    2015-10-06

    DICe is an open source digital image correlation (DIC) tool intended for use as a module in an external application or as a standalone analysis code. It's primary capability is computing full –field displacements and strains from sequences of digital These images are typically of a material sample undergoing a materials characterization experiment, but DICe is also useful for other applications (for example, trajectory tracking). DICe is machine portable (Windows, Linux and Mac) and can be effectively deployed on a high performance computing platform. Capabilities from DICe can be invoked through a library interface, via source code integration of DICe classes or through a graphical user interface.

  8. EERE Digital Data Management | Department of Energy

    Office of Environmental Management (EM)

    EERE Digital Data Management EERE Digital Data Management The Office of Energy Efficiency and Renewable Energy (EERE) Policy on Digital Data Management is part of the ...

  9. Digitally Marking RSA Moduli

    SciTech Connect (OSTI)

    Johnston, A.M.

    2000-10-09

    The moduli used in RSA (see [5]) can be generated by many different sources. The generator of that modulus (assuming a single entity generates the modulus) knows its factorization. They would have the ability to forge signatures or break any system based on this moduli. If a moduli and the RSA parameters associated with it were generated by a reputable source, the system would have higher value than if the parameters were generated by an unknown entity. So for tracking, security, confidence and financial reasons it would be beneficial to know who the generator of the RSA modulus was. This is where digital marking comes in. An RSA modulus ia digitally marked, or digitally trade marked, if the generator and other identifying features of the modulus (such as its intended user, the version number, etc.) can be identified and possibly verified by the modulus itself. The basic concept of digitally marking an RSA modulus would be to fix the upper bits of the modulus to this tag. Thus anyone who sees the public modulus can tell who generated the modulus and who the generator believes the intended user/owner of the modulus is.

  10. ELECTRONIC DIGITAL COMPUTER

    DOE Patents [OSTI]

    Stone, J.J. Jr.; Bettis, E.S.; Mann, E.R.

    1957-10-01

    The electronic digital computer is designed to solve systems involving a plurality of simultaneous linear equations. The computer can solve a system which converges rather rapidly when using Von Seidel's method of approximation and performs the summations required for solving for the unknown terms by a method of successive approximations.

  11. Final safety evaluation report related to the certification of the advanced boiling water reactor design. Volume 1: Main report

    SciTech Connect (OSTI)

    Not Available

    1994-07-01

    This safety evaluation report (SER) documents the technical review of the US Advanced Boiling Water Reactor (ABWR) standard design by the US Nuclear Regulatory Commission (NRC) staff. The application for the ABWR design was initially submitted by the General Electric Company, now GE Nuclear Energy (GE), in accordance with the procedures of Appendix O of Part 50 of Title 10 of the Code of Federal Regulations (10 CFR Part 50). Later GE requested that its application be considered as an application for design approval and subsequent design certification pursuant to 10 CFR {section} 52.45. The ABWR is a single-cycle, forced-circulation, boiling water reactor (BWR) with a rated power of 3,926 megawatts thermal (MWt) and a design power of 4,005 MWt. To the extent feasible and appropriate, the staff relied on earlier reviews for those ABWR design features that are substantially the same as those previously considered. Unique features of the ABWR design include internal recirculation pumps, fine-motion control rod drives, microprocessor-based digital logic and control systems, and digital safety systems. On the basis of its evaluation and independent analyses, the NRC staff concludes that, subject to satisfactory resolution of the confirmatory items identified in Section 1.8 of this SER, GE`s application for design certification meets the requirements of Subpart B of 10 CFR Part 52 that are applicable and technically relevant to the US ABWR standard design.

  12. Final safety evaluation report related to the certification of the advanced boiling water reactor design. Volume 2: Appendices

    SciTech Connect (OSTI)

    Not Available

    1994-07-01

    This safety evaluation report (SER) documents the technical review of the US Advanced Boiling Water Reactor (ABWR) standard design by the US Nuclear Regulatory Commission (NRC) staff. The application for the ABWR design was initially submitted by the General Electric Company, now GE Nuclear Energy (GE), in accordance with the procedures of Appendix O of Part 50 of Title 10 of the code of Federal Regulations (10 CFR Part 50). Later GE requested that its application be considered as an application for design approval and subsequent design certification pursuant to 10 CFR {section} 52.45. The ABWR is a single-cycle, forced-circulation, boiling water reactor (BWR) with a rated power of 3,926 megawatts thermal (MWt) and a design power of 4,005 MWt. To the extent feasible and appropriate, the staff relied on earlier reviews for those ABWR design features that are substantially the same as those previously considered. Unique features of the ABWR design include internal recirculation pumps, fine-motion control rod drives, microprocessor-based digital logic and control systems, and digital safety systems. On the basis of its evaluation and independent analyses, the NRC staff concludes that, subject to satisfactory resolution of the confirmatory items identified in Section 1.8 of this SER, GE`s application for design certification meets the requirements of Subpart B of 10 CFR Part 52 that are applicable and technically relevant to the US ABWR standard design.

  13. Hanford Site Transuranic (TRU) Waste Certification Plan

    SciTech Connect (OSTI)

    GREAGER, T.M.

    2000-12-01

    As a generator of transuranic (TRU) and TRU mixed waste destined for disposal at the Waste Isolation Pilot Plant (WIPP), the Hanford Site must ensure that its TRU waste meets the requirements of US. Department of Energy (DOE) 0 435.1, ''Radioactive Waste Management,'' and the Contact-Handled (CH) Transuranic Waste Acceptance Criteria for the Waste Isolation Pilot Plant (WIPP-WAC). WIPP-WAC requirements are derived from the WIPP Technical Safety Requirements, WIPP Safety Analysis Report, TRUPACT-II SARP, WIPP Land Withdrawal Act, WIPP Hazardous Waste Facility Permit, and Title 40 Code of Federal Regulations (CFR) 191/194 Compliance Certification Decision. The WIPP-WAC establishes the specific physical, chemical, radiological, and packaging criteria for acceptance of defense TRU waste shipments at WIPP. The WPP-WAC also requires that participating DOE TRU waste generator/treatment/storage sites produce site-specific documents, including a certification plan, that describe their program for managing TRU waste and TRU waste shipments before transferring waste to WIPP. Waste characterization activities provide much of the data upon which certification decisions are based. Waste characterization requirements for TRU waste and TRU mixed waste that contains constituents regulated under the Resource Conservation and Recovery Act (RCRA) are established in the WIPP Hazardous Waste Facility Permit Waste Analysis Plan (WAP). The Hanford Site Quality Assurance Project Plan (QAPjP) (HNF-2599) implements the applicable requirements in the WAP and includes the qualitative and quantitative criteria for making hazardous waste determinations. The Hanford Site must also ensure that its TRU waste destined for disposal at WPP meets requirements for transport in the Transuranic Package Transporter-11 (TRUPACT-11). The US. Nuclear Regulatory Commission (NRC) establishes the TRUPACT-11 requirements in the Safety Analysis Report for the TRUPACT-II Shipping Package (TRUPACT-11 SARP). In

  14. Hanford Site Transuranic (TRU) Waste Certification Plan

    SciTech Connect (OSTI)

    GREAGER, T.M.

    2000-12-06

    As a generator of transuranic (TRU) and TRU mixed waste destined for disposal at the Waste Isolation Pilot Plant (WIPP), the Hanford Site must ensure that its TRU waste meets the requirements of US. Department of Energy (DOE) 0 435.1, ''Radioactive Waste Management,'' and the Contact-Handled (CH) Transuranic Waste Acceptance Criteria for the Waste Isolation Pilot Plant (WIPP-WAC). WIPP-WAC requirements are derived from the WIPP Technical Safety Requirements, WIPP Safety Analysis Report, TRUPACT-II SARP, WIPP Land Withdrawal Act, WIPP Hazardous Waste Facility Permit, and Title 40 Code of Federal Regulations (CFR) 191/194 Compliance Certification Decision. The WIPP-WAC establishes the specific physical, chemical, radiological, and packaging criteria for acceptance of defense TRU waste shipments at WIPP. The WPP-WAC also requires that participating DOE TRU waste generator/treatment/storage sites produce site-specific documents, including a certification plan, that describe their program for managing TRU waste and TRU waste shipments before transferring waste to WIPP. Waste characterization activities provide much of the data upon which certification decisions are based. Waste characterization requirements for TRU waste and TRU mixed waste that contains constituents regulated under the Resource Conservation and Recovery Act (RCRA) are established in the WIPP Hazardous Waste Facility Permit Waste Analysis Plan (WAP). The Hanford Site Quality Assurance Project Plan (QAPjP) (HNF-2599) implements the applicable requirements in the WAP and includes the qualitative and quantitative criteria for making hazardous waste determinations. The Hanford Site must also ensure that its TRU waste destined for disposal at WPP meets requirements for transport in the Transuranic Package Transporter-11 (TRUPACT-11). The US. Nuclear Regulatory Commission (NRC) establishes the TRUPACT-11 requirements in the Safety Analysis Report for the TRUPACT-II Shipping Package (TRUPACT-11 SARP). In

  15. Compliance, Certification and Enforcement for US Appliance and Equipment Energy Efficiency Programs by US DOE

    Broader source: Energy.gov [DOE]

    Information about energy and water conservation standards, ENERGY STAR, and compliance and certification enforcement.

  16. Certificate of Property Receipt HQ Form 4420.1 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Certificate of Property Receipt HQ Form 4420.1 Certificate of Property Receipt HQ Form 4420.1 Certificate of Property Receipt HQ Form 4420.1 Certificate of Property Receipt HQ Form 4420.1 (233.35 KB) More Documents & Publications DOE HQ F 4420.1 DOE HQ F 580-2 DOE HQ F 580

  17. International comparison of product certification and verification methods for appliances

    SciTech Connect (OSTI)

    Zhou, Nan; Romankiewicz, John; Fridley, David; Zheng, Nina

    2012-06-01

    Enforcement of appliance standards and consumer trust in appliance labeling are important foundations of growing a more energy efficient economy. Product certification and verification increase compliance rates which in turn increase both energy savings and consumer trust. This paper will serve two purposes: 1) to review international practices for product certification and verification as they relate to the enforcement of standards and labeling programs in the U.S., E.U., Australia, Japan, Canada, and China; and 2) to make recommendations for China to implement improved certification processes related to their mandatory standards and labeling program such as to increase compliance rates and energy savings potential.

  18. International Comparison of Product Certification and Verification Methods for Appliances

    SciTech Connect (OSTI)

    Zhou, Nan; Romankiewicz, John; Fridley, David; Zheng, Nina

    2012-06-01

    Enforcement of appliance standards and consumer trust in appliance labeling are important foundations of growing a more energy efficient economy. Product certification and verification increase compliance rates which in turn increase both energy savings and consumer trust. This paper will serve two purposes: 1) to review international practices for product certification and verification as they relate to the enforcement of standards and labeling programs in the U.S., E.U., Australia, Japan, Canada, and China; and 2) to make recommendations for China to implement improved certification processes related to their mandatory standards and labeling program such as to increase compliance rates and energy savings potential.

  19. Buildings Energy Data Book: 9.3 Certification Programs

    Buildings Energy Data Book [EERE]

    2 Building Performance Institute (BPI) Certifications, by State State Certifications (1) State Certifications (1) Alabama 84 57 Nebraska 84 22 Alaska 153 5 Nevada 296 9 Arizona 1,035 6 New Hampshire 294 4 Arkansas 115 26 New Jersey 1,982 4 California 2,782 14 New Mexico 116 18 Colorado 914 6 New York 5,408 4 Connecticut 1,041 3 North Carolina 1,379 7 Delaware 152 6 North Dakota 1 684 D.C. 84 7 Ohio 756 15 Florida 234 81 Oklahoma 127 30 Georgia 650 15 Oregon 863 4 Hawaii 2 687 Pennsylvania 1,548

  20. Digital Image Correlation Engine

    Energy Science and Technology Software Center (OSTI)

    2015-10-06

    DICe is an open source digital image correlation (DIC) tool intended for use as a module in an external application or as a standalone analysis code. It's primary capability is computing full –field displacements and strains from sequences of digital These images are typically of a material sample undergoing a materials characterization experiment, but DICe is also useful for other applications (for example, trajectory tracking). DICe is machine portable (Windows, Linux and Mac) and canmore » be effectively deployed on a high performance computing platform. Capabilities from DICe can be invoked through a library interface, via source code integration of DICe classes or through a graphical user interface.« less

  1. Metrological digital audio reconstruction

    DOE Patents [OSTI]

    Fadeyev; Vitaliy , Haber; Carl

    2004-02-19

    Audio information stored in the undulations of grooves in a medium such as a phonograph record may be reconstructed, with little or no contact, by measuring the groove shape using precision metrology methods coupled with digital image processing and numerical analysis. The effects of damage, wear, and contamination may be compensated, in many cases, through image processing and analysis methods. The speed and data handling capacity of available computing hardware make this approach practical. Two examples used a general purpose optical metrology system to study a 50 year old 78 r.p.m. phonograph record and a commercial confocal scanning probe to study a 1920's celluloid Edison cylinder. Comparisons are presented with stylus playback of the samples and with a digitally re-mastered version of an original magnetic recording. There is also a more extensive implementation of this approach, with dedicated hardware and software.

  2. Digital scale converter

    DOE Patents [OSTI]

    Upton, Richard G.

    1978-01-01

    A digital scale converter is provided for binary coded decimal (BCD) conversion. The converter may be programmed to convert a BCD value of a first scale to the equivalent value of a second scale according to a known ratio. The value to be converted is loaded into a first BCD counter and counted down to zero while a second BCD counter registers counts from zero or an offset value depending upon the conversion. Programmable rate multipliers are used to generate pulses at selected rates to the counters for the proper conversion ratio. The value present in the second counter at the time the first counter is counted to the zero count is the equivalent value of the second scale. This value may be read out and displayed on a conventional seven-segment digital display.

  3. DIGITAL Q METER

    DOE Patents [OSTI]

    Briscoe, W.L.

    1962-02-13

    A digital Q meter is described for measuring the Q of mechanical or electrical devices. The meter comprises in combination a transducer coupled to an input amplifier, and an upper and lower level discriminator coupled to the amplifier and having their outputs coupled to an anticoincidence gate. The output of the gate is connected to a scaler. The lower level discriminator is adjusted to a threshold level of 36.8 percent of the operating threshold level of the upper level discriminator. (AEC)

  4. LEED Certification Training & Attaintment | OpenEI Community

    Open Energy Info (EERE)

    LEED Certification Training & Attaintment Home > Groups > OpenEI Community Central Sri sri's picture Submitted by Sri sri(5) Member 18 February, 2013 - 00:44 Any one can give...

  5. OAR 340-048 - Certification of Compliance with Water Quality...

    Open Energy Info (EERE)

    Procedures for processing applications for certification pursuant to Section 401 of the Clean Water Act. Published NA Year Signed or Took Effect 1985 Legal Citation OAR 340-048...

  6. V-198: Red Hat Enterprise MRG Messaging Qpid Python Certificate...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    8: Red Hat Enterprise MRG Messaging Qpid Python Certificate Validation Flaw Lets Remote Users Conduct Man-in-the-Middle Attacks V-198: Red Hat Enterprise MRG Messaging Qpid Python...

  7. 23 CCR 3855 et seq. - Water Quality Certification | Open Energy...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Legal Document- RegulationRegulation: 23 CCR 3855 et seq. - Water Quality CertificationLegal Published NA Year Signed or Took...

  8. Microsoft Word - Transmittal of the Certification Audit Report...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the Certification Audit Report for the Advanced Mixed Waste Treatment Program, Audit A-08-19 Dear Mr. ... II.C.2.c of the Waste Isolation Pilot Plant Hazardous Waste Facility Permit. ...

  9. 33 USC 1341 Permits and Licenses - Certification | Open Energy...

    Open Energy Info (EERE)

    1341 Permits and Licenses - CertificationLegal Published NA Year Signed or Took Effect 1977 Legal Citation 33 USC 1341 (1977) DOI Not Provided Check for DOI availability: http:...

  10. ISSUANCE 2016-05-06: Energy Conservation Program: Certification...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ISSUANCE 2015-12-22: ENERGY CONSERVATION PROGRAM: CERTIFICATION AND ENFORCEMENT; Notice of Proposed Rule Microsoft Word - CCEFinalRule02-07-11 Final Word.docx ISSUANCE 2016-02...

  11. New Year, New Certification Opportunities for Home Energy Workers

    Broader source: Energy.gov [DOE]

    The Energy Department has developed a new certification program for quality control inspectors, energy auditors, crew leaders, and retrofit installer technicians, as part of the Weatherization Assistance Program's Guidelines for Home Energy Professionals project.

  12. El Paso Electric Company - Small System Renewable Energy Certificate

    Open Energy Info (EERE)

    energy certificates (RECs) from its New Mexico customers who install small photovoltaic (PV) systems and wind systems up to 10 kilowatts (kW) in capacity and medium systems...

  13. FAQS Reference Guide – NNSA Package Certification Engineer

    Office of Energy Efficiency and Renewable Energy (EERE)

    This reference guide has been developed to address the competency statements in the April 2016 edition of DOE-Standard (STD)-1126-2016, NNSA Package Certification Engineer Functional Area Qualification Standard

  14. Application for a Certificate of Public Good for Net Metered...

    Open Energy Info (EERE)

    Certificate of Public Good for Net Metered Power Systems that are Non-Photovoltaic Systems Up to 150 kW (AC) in Capacity Jump to: navigation, search OpenEI Reference LibraryAdd to...

  15. Microsoft Word - Transmittal of the Certification Audit Report...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Drive East, Building 1 Santa Fe, New Mexico 87505-6303 Subject: Transmittal of the Certification Audit Report for the Hanford TRU Program Dear Mr. Zappe: Enclosed is the Hanford...

  16. Financial_Assistance_Certification-01.pdf | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    FinancialAssistanceCertification-01.pdf More Documents & Publications PolFlash10-30attach2.pdf OPAM Policy Acquisition Guides Microsoft Word - AL2006-07.doc...

  17. NREL Recommended for Prestigious Safety and Environmental Certifications -

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    News Releases | NREL Recommended for Prestigious Safety and Environmental Certifications June 10, 2014 The Energy Department's National Renewable Energy Laboratory (NREL) has been recommended for recertification to three significant international standards demonstrating the laboratory's commitment to the environment, safety, and quality excellence. The management system certifications include: ISO 14001:2004 (environment); OHSAS 18001:2007 (health and safety), and ISO 9001:2008 (quality,

  18. New Year, New Certification Opportunities for Home Energy Workers |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Year, New Certification Opportunities for Home Energy Workers New Year, New Certification Opportunities for Home Energy Workers January 8, 2014 - 12:00am Addthis The Energy Department's Weatherization Assistance Program (WAP) is well known for its efforts to improve the lives of low-income American families through energy efficient home upgrades, but it also focuses on establishing a skilled and certified workforce. As part of the Guidelines for Home Energy Professionals

  19. DOE Proposes Requirement for Certification of Admissibility for Covered

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Products and Equipment | Department of Energy Proposes Requirement for Certification of Admissibility for Covered Products and Equipment DOE Proposes Requirement for Certification of Admissibility for Covered Products and Equipment February 22, 2016 - 6:26pm Addthis DOE has issued a Notice of Proposed Rulemaking (NOPR) in which it proposes to require that a person importing into the United States any covered product or equipment subject to an applicable energy conservation standard provide,

  20. PMCDP Certification and Equivalency Guidelines | Department of Energy

    Energy Savers [EERE]

    and Equivalency Guidelines PMCDP Certification and Equivalency Guidelines This Certification and Equivalency Guidelines (CEG) establishes the U.S. Department of Energy (DOE) competency requirements for all DOE federal project management personnel to be certified as DOE Federal Projects Directors (FPDs) in accordance with DOE Order 361.1C, Acquisition Career Management Program, Chapter V (Project Management Career Development Program [PMCDP]). The purpose of the CEG is to provide requirements for

  1. Testing and Certification of Gaseous Storage Tanks for Vehicles: The

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    European Commission (EC) Perspective | Department of Energy Testing and Certification of Gaseous Storage Tanks for Vehicles: The European Commission (EC) Perspective Testing and Certification of Gaseous Storage Tanks for Vehicles: The European Commission (EC) Perspective These slides were presented at the International Hydrogen Fuel and Pressure Vessel Forum on September 27 - 29, 2010, in Beijing, China. ihfpv_moretto.pdf (1.17 MB) More Documents & Publications International Hydrogen

  2. CERTIFICATION DOCKET FOR AL-TECH SPECIALTY STEEL CORPORATION

    Office of Legacy Management (LM)

    NY. 0 -02-3 CERTIFICATION DOCKET FOR AL-TECH SPECIALTY STEEL CORPORATION (THE F01umz ALLEGHENY-LUDLUM STEEL CORPORATION) WATERVLIET, NEW YORK, AND OFFSITE PROPERTY IN DUNKIRK, NEW YORK Department of Energy Office of Nuclear Energy Office of Terminal Waste Disposal and Remedial Action Division of Remedial Action Projects CONTENTS Introduction to the Certification Docket for the Al-Tech Specialty Steel Corporation, (the Former Allegheny-Ludlum Steel Corporation) Watervliet, New York, and Offsite

  3. CERTIFICATION DOCKET FOR BETHLEHEM STEEL CORPORATION LACKAWANNA, NEW YORK

    Office of Legacy Management (LM)

    BETHLEHEM STEEL CORPORATION LACKAWANNA, NEW YORK Department of Energy Office of Nuclear Energy Office of Terminal Waste Disposal and Remedial Action Division of Remedial Action Projects CONTENTS Introduction to the Certification Docket for Bethlehem Steel Corporation, Lackawanna, New York Purpose Docket Contents Exhibit I: Summary of Activities at the Bethlehem Steel Corporation, Lackawanna, New York Exhibit II: Documents Supporting the Certification of the Bethlehem Steel Corporation,

  4. CERTIFICATION DOCKET FOR COLUMBIA UNIVERSITY NEW YORK, NEW YORK

    Office of Legacy Management (LM)

    COLUMBIA UNIVERSITY NEW YORK, NEW YORK Department of Energy Office of Nuclear Energy Office of Terminal Waste Disposal and Remedial Action Division of Remedial Action Projects CONTENTS Introduction to the Certification Docket for Columbia University, New York, New York Purpose Docket Contents Exhibit I: Summary of Activities at the Columbia University, New York, New York Exhibit II: Documents Supporting the Certification of the Columbia University, New York, New York Page I-l II- 1 . . . 111

  5. CERTIFICATION DOCKET ROHM & HAAS COMPANY PHILADELPHIA, PENNSYLVANIA

    Office of Legacy Management (LM)

    $f 2 .A , :j. 1' q CERTIFICATION DOCKET ROHM & HAAS COMPANY PHILADELPHIA, PENNSYLVANIA - Department of Energy Office of Nuclear Energy Office of Terminal Waste Disposal and Remedial Action Division of Remedial Action Projects x- ,m._- ~-____- -.. - CONTENTS - INTRODUCTION Purpose Docket Contents Exhibit I: Summary'of Activities at Rohm & Haas Company, Philadelphia, Pennsylvania Exhibit II: Documents Supporting the Certification of the Rohm & Haas Company, Philadelphia, Pennsylvania

  6. CNS employees earning FPE Graduate Certificates | Y-12 National Security

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Complex earning FPE ... CNS employees earning FPE Graduate Certificates Posted: June 4, 2015 - 5:33pm On Monday, 25 Consolidated Nuclear Security, LLC, employees went back to school. These employees are pursuing a graduate certificate in fire protection engineering through the Electrical Engineering and Computer Science Department at The University of Tennessee, Knoxville. CNS employees from Pantex and Y-12 National Security Complex are included in this initial cohort developing critical

  7. Certification and Rating of Attachments for Fenestration Technologies

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (DE-FOA-0001000) | Department of Energy Certification and Rating of Attachments for Fenestration Technologies (DE-FOA-0001000) Certification and Rating of Attachments for Fenestration Technologies (DE-FOA-0001000) November 5, 2013 - 4:43pm Addthis This funding opportunity is closed Through this Funding Opportunity Announcement (FOA) the Building Technologies Office (BTO) seeks to establish a performance rating mechanism for assessing the energy performance of fenestration attachments. DOE

  8. DIGITAL ARCHITECTURE PROJECT PLAN

    SciTech Connect (OSTI)

    Thomas, Ken

    2014-09-01

    The objective of this project is to develop an industry consensus document on how to scope and implement the underlying information technology infrastructure that is needed to support a vast array of real-time digital technologies to improve NPP work efficiency, to reduce human error, to increase production reliability and to enhance nuclear safety. A consensus approach is needed because: • There is currently a wide disparity in nuclear utility perspectives and positions on what is prudent and regulatory-compliant for introducing certain digital technologies into the plant environment. For example, there is a variety of implementation policies throughout the industry concerning electromagnetic compatibility (EMC), cyber security, wireless communication coverage, mobile devices for workers, mobile technology in the control room, and so forth. • There is a need to effectively share among the nuclear operating companies the early experience with these technologies and other forms of lessons-learned. There is also the opportunity to take advantage of international experience with these technologies. • There is a need to provide the industry with a sense of what other companies are implementing, so that each respective company can factor this into their own development plans and position themselves to take advantage of new work methods as they are validated by the initial implementing companies. In the nuclear power industry, once a better work practice has been proven, there is a general expectation that the rest of the industry will adopt it. However, the long-lead time of information technology infrastructure could prove to be a delaying factor. A secondary objective of this effort is to provide a general understanding of the incremental investment that would be required to support the targeted digital technologies, in terms of an incremental investment over current infrastructure. This will be required for business cases to support the adoption of these new

  9. Directory of Certificates of Compliance for radioactive materials packages: Certificates of Compliance. Volume 2, Revision 18

    SciTech Connect (OSTI)

    1995-10-01

    The purpose of this directory is to make available a convenient source of information on packagings which have been approved by the US Nuclear Regulatory Commission. To assist in identifying packaging, an index by Model Number and corresponding Certificate of Compliance Number is included at the front of Volumes 1 and 2. An alphabetical listing by user name is included in the back of Volume 3 of approved QA programs. The reports include a listing of all users of each package design and approved QA programs prior to the publication date.

  10. Digital Identities | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Digital Identities Digital Identities banner-957163_960_720.jpg Public Key Infrastructure (PKI) is a comprehensive system that provides public-key encryption and digital signature services: Authentication - Uniquely identifies the information originator and consumer Confidentiality or Privacy - Assures information and data are protected from unauthorized access Data integrity - Assures data has not been accidentally or deliberately altered Non-Repudiation - Provides proof of the integrity and

  11. Digital Lumens | Open Energy Information

    Open Energy Info (EERE)

    Lumens Jump to: navigation, search Name: Digital Lumens Address: 110 Canal Street Place: Boston, Massachusetts Zip: 02114 Region: Greater Boston Area Product: Intelligent Lighting...

  12. Stored program digital process controller

    DOE Patents [OSTI]

    Stephenson, Dwight L.

    1977-01-04

    A digital process control function generator wherein a timing clock, in conjunction with programmable read only memories controls variables in a process with respect to time.

  13. Hanford site transuranic waste certification plan

    SciTech Connect (OSTI)

    GREAGER, T.M.

    1999-05-12

    As a generator of transuranic (TRU) and TRU mixed waste destined for disposal at the Waste Isolation Pilot Plant (WIPP), the Hanford Site must ensure that its TRU waste meets the requirements of U.S. Department of Energy (DOE) Order 5820.2A, ''Radioactive Waste Management, and the Waste Acceptance Criteria for the Waste Isolation Pilot Plant' (DOE 1996d) (WIPP WAC). The WIPP WAC establishes the specific physical, chemical, radiological, and packaging criteria for acceptance of defense TRU waste shipments at WIPP. The WIPP WAC also requires that participating DOE TRU waste generator/treatment/storage sites produce site-specific documents, including a certification plan, that describe their management of TRU waste and TRU waste shipments before transferring waste to WIPP. The Hanford Site must also ensure that its TRU waste destined for disposal at WIPP meets requirements for transport in the Transuranic Package Transporter41 (TRUPACT-11). The U.S. Nuclear Regulatory Commission (NRC) establishes the TRUPACT-I1 requirements in the ''Safety Analysis Report for the TRUPACT-II Shipping Package'' (NRC 1997) (TRUPACT-I1 SARP).

  14. An investigation of DUA caching strategies for public key certificates

    SciTech Connect (OSTI)

    Cheung, T.C.

    1993-11-01

    Internet Privacy Enhanced Mail (PEM) provides security services to users of Internet electronic mail. PEM is designed with the intention that it will eventually obtain public key certificates from the X.500 directory service. However, such a capability is not present in most PEM implementations today. While the prevalent PEM implementation uses a public key certificate-based strategy, certificates are mostly distributed via e-mail exchanges, which raises several security and performance issues. In this thesis research, we changed the reference PEM implementation to make use of the X.500 directory service instead of local databases for public key certificate management. The thesis discusses some problems with using the X.500 directory service, explores the relevant issues, and develops an approach to address them. The approach makes use of a memory cache to store public key certificates. We implemented a centralized cache server and addressed the denial-of-service security problem that is present in the server. In designing the cache, we investigated several cache management strategies. One result of our study is that the use of a cache significantly improves performance. Our research also indicates that security incurs extra performance cost. Different cache replacement algorithms do not seem to yield significant performance differences, while delaying dirty-writes to the backing store does improve performance over immediate writes.

  15. Digital quadrature phase detection

    DOE Patents [OSTI]

    Smith, James A.; Johnson, John A.

    1992-01-01

    A system for detecting the phase of a frequency of phase modulated signal that includes digital quadrature sampling of the frequency or phase modulated signal at two times that are one quarter of a cycle of a reference signal apart, determination of the arctangent of the ratio of a first sampling of the frequency or phase modulated signal to the second sampling of the frequency or phase modulated signal, and a determination of quadrant in which the phase determination is increased by 2.pi. when the quadrant changes from the first quadrant to the fourth quadrant and decreased by 2.pi. when the quadrant changes from the fourth quadrant to the first quadrant whereby the absolute phase of the frequency or phase modulated signal can be determined using an arbitrary reference convention.

  16. Digital quadrature phase detection

    DOE Patents [OSTI]

    Smith, J.A.; Johnson, J.A.

    1992-05-26

    A system for detecting the phase of a frequency or phase modulated signal that includes digital quadrature sampling of the frequency or phase modulated signal at two times that are one quarter of a cycle of a reference signal apart, determination of the arctangent of the ratio of a first sampling of the frequency or phase modulated signal to the second sampling of the frequency or phase modulated signal, and a determination of quadrant in which the phase determination is increased by 2[pi] when the quadrant changes from the first quadrant to the fourth quadrant and decreased by 2[pi] when the quadrant changes from the fourth quadrant to the first quadrant whereby the absolute phase of the frequency or phase modulated signal can be determined using an arbitrary reference convention. 6 figs.

  17. U-217: Red Hat Certificate System Bugs Let Remote Users Conduct Cross-Site Scripting and Denial of Service Attacks

    Office of Energy Efficiency and Renewable Energy (EERE)

    Two vulnerabilities were reported in Red Hat Certificate System. A remote user can conduct cross-site scripting attacks. A remote authenticated user can revoke the CA certificate.

  18. EPA ENERGY STAR Webinar: How to Apply for the ENERGY STAR Certification

    Broader source: Energy.gov [DOE]

    Join us to learn about applying for ENERGY STAR Certification in Portfolio Manager. Understand the value of the ENERGY STAR certification, see the step-by-step process of applying, and gain tips to...

  19. Emerging Markets for Renewable Energy Certificates: Opportunities and Challenges

    SciTech Connect (OSTI)

    Holt, E.; Bird, L.

    2005-01-01

    Renewable energy certificates (RECs) represent the attributes of electricity generated from renewable energy sources. These attributes are unbundled from the physical electricity, and the two products-the attributes embodied in the certificates and the commodity electricity-may be sold or traded separately. RECs are quickly becoming the currency of renewable energy markets because of their flexibility and the fact that they are not subject to the geographic and physical limitations of commodity electricity. RECs are currently used by utilities and marketers to supply renewable energy products to end-use customers as well as to demonstrate compliance with regulatory requirements, such as renewable energy mandates. The purpose of this report is to describe and analyze the emerging market for renewable energy certificates. It describes how RECs are marketed, examines RECs markets including scope and prices, and identifies and describes the key challenges facing the growth and success of RECs markets.

  20. Photovoltaic module certification/laboratory accreditation criteria development: Implementation handbook

    SciTech Connect (OSTI)

    Osterwald, C.R.; Hammond, R.L.; Wood, B.D.; Backus, C.E.; Sears, R.L.; Zerlaut, G.A.; D`Aiello, R.V.

    1996-08-01

    This document covers the second phase of a two-part program. Phase I provided an overview of the structure and function of typical product certification/laboratory accreditation programs. This report (Phase H) provides most of the draft documents that will be necessary for the implementation of a photovoltaic (PV) module certification/laboratory accreditation program. These include organizational documents such as articles of incorporation, bylaws, and rules of procedure, as well as marketing and educational program documents. In Phase I, a 30-member criteria development committee was established to guide, review and reach a majority consensus regarding criteria for a PV certification/laboratory accreditation program. Committee members represented PV manufacturers, end users, standards and codes organizations, and testing laboratories. A similar committee was established for Phase II; the criteria implementation committee consisted of 29 members. Twenty-one of the Phase I committee members also served on the Phase II committee, which helped to provide program continuity during Phase II.

  1. Achieving WIPP certification for software: A white paper

    SciTech Connect (OSTI)

    Matthews, S.D.; Adams, K.; Twitchell, K.E.

    1998-07-01

    The NMT-1 and NMT-3 organizations within the Chemical and Metallurgical Research (CMR) facility at the Los Alamos National Laboratory (LANL) is working to achieve Waste Isolation Pilot Plant (WIPP) certification to enable them to transport their TRU waste to WIPP. In particular, the NMT-1 management is requesting support from the Idaho National Engineering and Environmental Laboratory (INEEL) to assist them in making the Laboratory Information Management System (LIMS) software WIPP certifiable. Thus, LIMS must be compliant with the recognized software quality assurance (SQA) requirements stated within the QAPD. Since the Idaho National Engineering and Environmental Laboratory (INEEL) has achieved WIPP certification, INEEL personnel can provide valuable assistance to LANL by sharing lessons learned and recommendations. Thus, this white paper delineates the particular software quality assurance requirements required for WIPP certification.

  2. Oak Ridge National Laboratory Transuranic Waste Certification Program

    SciTech Connect (OSTI)

    Smith, J.H.; Bates, L.D.; Box, W.D.; Aaron, W.S.; Setaro, J.A.

    1988-08-01

    The US Department of Energy (DOE) has requested that all DOE facilities handling defense transuranic (TRU) waste develop and implement a program whereby all TRU waste will be contained, stored, and shipped to the Waste Isolation Pilot Plant (WIPP) in accordance with the requirements set forth in the DOE certification documents WIPP-DOE-069, 114, 120, 137, 157, and 158. The program described in this report describes how Oak Ridge National Laboratory (ORNL) intends to comply with these requirements and the techniques and procedures used to ensure that ORNL TRU wastes are certifiable for shipment to WIPP. This document describes the program for certification of newly generated (NG) contact-handled transuranic (CH-TRU) waste. Previsions have been made for addenda, which will extend the coverage of this document to include certification of stored CH-TRU and NG and stored remote-handled transuranic (RH-TRU) waste, as necessary. 24 refs., 11 figs., 4 tabs.

  3. Renewable Energy & Energy Efficiency Partnership (REEEP) Digital...

    Open Energy Info (EERE)

    (REEEP) Digital Library Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Renewable Energy and Energy Efficiency Partnership (REEEP) Digital Library AgencyCompany...

  4. Digital Data Management Glossary | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Glossary Digital Data Management Glossary Digital data management glossary terms are defined below. Data preservation: Data preservation means providing for the usability of data ...

  5. New Mexico Non-Taxable Transaction Certificate (NM NTTC) Request

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mexico Non-Taxable Transaction Certificate (NM NTTC) Request This form is for vendors of Los Alamos National Laboratory. To request a NM Non-Taxable Transaction Certificate (NTTC), please provide the information requested below. Request can be submitted by mail, email or fax to: Los Alamos National Laboratory P.O. Box 1663 Accounts Payable, MS P240 Los Alamos, NM 87545 Fax: (505) 665-8357 processsupport@lanl.gov Company Name (as registered with Tax Authority) NOTE: If registered with the State

  6. Type 4 Tank Testing, Certification and Field Performance Data | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Type 4 Tank Testing, Certification and Field Performance Data Type 4 Tank Testing, Certification and Field Performance Data These slides were presented at the International Hydrogen Fuel and Pressure Vessel Forum on September 27 - 29, 2010, in Beijing, China. ihfpv_wong.pdf (2.29 MB) More Documents & Publications Hydrogen Tank Testing R&D CNG and Hydrogen Tank Safety, R&D, and Testing Developing SAE Safety Standards for Hydrogen and Fuel Cell Vehicles (FCVs)

  7. NERSC Hosts Digital Stargazing Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NERSC Hosts Digital Stargazing Portal NERSC Hosts Digital Stargazing Portal June 4, 2015 Legacy highres 1400x800 Courtesy of DECam Legacy Survey Even non-scientists can now browse sky survey images hosted at NERSC. The DECam Legacy Survey has published the first in a series of web-based catalogs that will offer an update to images of the night sky originally taken with the 15-year-old camera of the Sloan Digital Sky Survey. In the spirit of the new information age, the survey will share frequent

  8. Digital-data receiver synchronization

    DOE Patents [OSTI]

    Smith, Stephen F.; Turner, Gary W.

    2005-08-02

    Digital-data receiver synchronization is provided with composite phase-frequency detectors, mutually cross-connected comparison feedback or both to provide robust reception of digital data signals. A single master clock can be used to provide frequency signals. Advantages can include fast lock-up time in moderately to severely noisy conditions, greater tolerance to noise and jitter when locked, and improved tolerance to clock asymmetries.

  9. Training and Certification Requirements for Personnel Utilizing ETA Procedures

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    GAC005 Revision 1 Effective June 2008 Training and Certification Requirements for Personnel Utilizing ETA Procedures Prepared by Electric Transportation Applications Prepared by: _______________________________ Date:__________ Garrett P. Beauregard Approved by: ______________________________________________ Date: _______________ Donald B. Karner Procedure ETA-GAC005 Revision 1 2 ©2006 Electric Transportation Applications All Rights Reserved Table of Contents 1 Objective

  10. Artifacts in digital coincidence timing

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Moses, W. W.; Peng, Q.

    2014-10-16

    Digital methods are becoming increasingly popular for measuring time differences, and are the de facto standard in PET cameras. These methods usually include a master system clock and a (digital) arrival time estimate for each detector that is obtained by comparing the detector output signal to some reference portion of this clock (such as the rising edge). Time differences between detector signals are then obtained by subtracting the digitized estimates from a detector pair. A number of different methods can be used to generate the digitized arrival time of the detector output, such as sending a discriminator output into amore » time to digital converter (TDC) or digitizing the waveform and applying a more sophisticated algorithm to extract a timing estimator.All measurement methods are subject to error, and one generally wants to minimize these errors and so optimize the timing resolution. A common method for optimizing timing methods is to measure the coincidence timing resolution between two timing signals whose time difference should be constant (such as detecting gammas from positron annihilation) and selecting the method that minimizes the width of the distribution (i.e. the timing resolution). Unfortunately, a common form of error (a nonlinear transfer function) leads to artifacts that artificially narrow this resolution, which can lead to erroneous selection of the 'optimal' method. In conclusion, the purpose of this note is to demonstrate the origin of this artifact and suggest that caution should be used when optimizing time digitization systems solely on timing resolution minimization.« less

  11. Apparatus and method for managing digital resources by passing digital resource tokens between queues

    DOE Patents [OSTI]

    Crawford, Henry J.; Lindenstruth, Volker

    1999-01-01

    A method of managing digital resources of a digital system includes the step of reserving token values for certain digital resources in the digital system. A selected token value in a free-buffer-queue is then matched to an incoming digital resource request. The selected token value is then moved to a valid-request-queue. The selected token is subsequently removed from the valid-request-queue to allow a digital agent in the digital system to process the incoming digital resource request associated with the selected token. Thereafter, the selected token is returned to the free-buffer-queue.

  12. Apparatus and method for managing digital resources by passing digital resource tokens between queues

    DOE Patents [OSTI]

    Crawford, H.J.; Lindenstruth, V.

    1999-06-29

    A method of managing digital resources of a digital system includes the step of reserving token values for certain digital resources in the digital system. A selected token value in a free-buffer-queue is then matched to an incoming digital resource request. The selected token value is then moved to a valid-request-queue. The selected token is subsequently removed from the valid-request-queue to allow a digital agent in the digital system to process the incoming digital resource request associated with the selected token. Thereafter, the selected token is returned to the free-buffer-queue. 6 figs.

  13. Digitally controlled distributed phase shifter

    DOE Patents [OSTI]

    Hietala, V.M.; Kravitz, S.H.; Vawter, G.A.

    1993-08-17

    A digitally controlled distributed phase shifter is comprised of N phase shifters. Digital control is achieved by using N binary length-weighted electrodes located on the top surface of a waveguide. A control terminal is attached to each electrode thereby allowing the application of a control signal. The control signal is either one or two discrete bias voltages. The application of the discrete bias voltages changes the modal index of a portion of the waveguide that corresponds to a length of the electrode to which the bias voltage is applied, thereby causing the phase to change through the underlying portion of the waveguide. The digitally controlled distributed phase shift network has a total phase shift comprised of the sum of the individual phase shifters.

  14. Digitally controlled distributed phase shifter

    DOE Patents [OSTI]

    Hietala, Vincent M.; Kravitz, Stanley H.; Vawter, Gregory A.

    1993-01-01

    A digitally controlled distributed phase shifter is comprised of N phase shifters. Digital control is achieved by using N binary length-weighted electrodes located on the top surface of a waveguide. A control terminal is attached to each electrode thereby allowing the application of a control signal. The control signal is either one or two discrete bias voltages. The application of the discrete bias voltages changes the modal index of a portion of the waveguide that corresponds to a length of the electrode to which the bias voltage is applied, thereby causing the phase to change through the underlying portion of the waveguide. The digitally controlled distributed phase shift network has a total phase shift comprised of the sum of the individual phase shifters.

  15. Precision digital pulse phase generator

    DOE Patents [OSTI]

    McEwan, Thomas E.

    1996-01-01

    A timing generator comprises a crystal oscillator connected to provide an output reference pulse. A resistor-capacitor combination is connected to provide a variable-delay output pulse from an input connected to the crystal oscillator. A phase monitor is connected to provide duty-cycle representations of the reference and variable-delay output pulse phase. An operational amplifier drives a control voltage to the resistor-capacitor combination according to currents integrated from the phase monitor and injected into summing junctions. A digital-to-analog converter injects a control current into the summing junctions according to an input digital control code. A servo equilibrium results that provides a phase delay of the variable-delay output pulse to the output reference pulse that linearly depends on the input digital control code.

  16. Precision digital pulse phase generator

    DOE Patents [OSTI]

    McEwan, T.E.

    1996-10-08

    A timing generator comprises a crystal oscillator connected to provide an output reference pulse. A resistor-capacitor combination is connected to provide a variable-delay output pulse from an input connected to the crystal oscillator. A phase monitor is connected to provide duty-cycle representations of the reference and variable-delay output pulse phase. An operational amplifier drives a control voltage to the resistor-capacitor combination according to currents integrated from the phase monitor and injected into summing junctions. A digital-to-analog converter injects a control current into the summing junctions according to an input digital control code. A servo equilibrium results that provides a phase delay of the variable-delay output pulse to the output reference pulse that linearly depends on the input digital control code. 2 figs.

  17. Mesofluidic two stage digital valve

    DOE Patents [OSTI]

    Jansen, John F; Love, Lonnie J; Lind, Randall F; Richardson, Bradley S

    2013-12-31

    A mesofluidic scale digital valve system includes a first mesofluidic scale valve having a valve body including a bore, wherein the valve body is configured to cooperate with a solenoid disposed substantially adjacent to the valve body to translate a poppet carried within the bore. The mesofluidic scale digital valve system also includes a second mesofluidic scale valve disposed substantially perpendicular to the first mesofluidic scale valve. The mesofluidic scale digital valve system further includes a control element in communication with the solenoid, wherein the control element is configured to maintain the solenoid in an energized state for a fixed period of time to provide a desired flow rate through an orifice of the second mesofluidic valve.

  18. Additional Guidance for EERE Digital Data Management Plans |...

    Office of Environmental Management (EM)

    Services Funding Digital Data Management Additional Guidance for EERE Digital Data Management Plans Additional Guidance for EERE Digital Data Management Plans Beyond the ...

  19. Energy Savings Certificate Markets: Opportunities and Implementation Barriers

    SciTech Connect (OSTI)

    Friedman, B.; Bird, L.; Barbose, G.

    2009-07-01

    Early experiences with energy savings certificates (ESCs) have revealed their merits and the challenges associated with them. While in the United States ESC markets have yet to gain significant traction, lessons can be drawn from early experiences in the states of Connecticut and New York, as well as from established markets in Italy, France, and elsewhere. The staying power of European examples demonstrates that ESCs can help initiate more efficiency projects. This article compares ESCs with renewable energy certificates (RECs), looks at the unique opportunities and challenges they present, and reviews solutions and best practices demonstrated by early ESC markets. Three major potential ESC market types are also reviewed: compliance, voluntary, and carbon. Additionally, factors that will benefit ESC markets in the United States are examined: new state EEPS policies, public interest in tools to mitigate climate change, and the growing interest in a voluntary market for ESCs.

  20. The North American Market For Renewable Energy Certificates, 6. edition

    SciTech Connect (OSTI)

    2007-10-15

    The report provides a study of the Renewable Energy Certificate (REC) market and takes a comprehensive look at what RECs are, how they work, the role they can play in spurring renewable energy development, the different models for implementing RECs, current offerings of REC suppliers, and customer purchases of RECs. Topics covered include: an overview of green power; definition of what RECs are and how they work; discussion of the history of RECs and their uses; explanation of the benefits of RECs and the challenges they face; discussion of how RECs interact with Renewable Portfolio Standards; discussion of the REC certification process; overview of the current market for RECs in the U.S.; profiles of major North American REC tracking systems; and, profiles of 40 key North American REC market participants.

  1. Considerations for Emerging Markets for Energy Savings Certificates

    SciTech Connect (OSTI)

    Friedman, B.; Bird, L.; Barbose, G.

    2008-10-01

    Early experiences with energy savings certificates (ESCs) have revealed both their merit and the challenges associated with them. In the United States, there has been little activity to date, so any lessons must be drawn from experiences in Italy, the United Kingdom (UK), France, and elsewhere. The staying power of European examples, particularly in Italy, demonstrates that ESCs can help initiate more efficiency projects. Although a robust market for renewable energy certificates (RECs) has emerged in both the voluntary and policy compliance contexts in the United States, ESCs have yet to gain significant traction. This report looks at the opportunity presented by ESCs, the unique challenges they bring, a comparison with RECs that can inform expectations about ESC market development, and the solutions and best practices early ESC market experience have demonstrated. It also examines whether there are real market barriers that have kept ESCs from being adopted and what structural features are necessary to develop effective trading programs.

  2. SNL Phuysician's Certificate of Disability; SF 4560-G

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    60-G (2-2016) SANDIA PROPRIETARY INFORMATION Supersedes (9-2015) Issue Personally Identifiable Information (when completed) SANDIA PROPRIETARY INFORMATION Sandia National Laboratories INSTRUCTIONS FOR COMPLETING PHYSICIAN'S CERTIFICATE OF ILLNESS/INJURY (PCII) Effective March 1, 2016 INSTRUCTIONS TO MANAGER: The immediate manager of an employee who has been absent due to illness or injury for three (3) full consecutive calendar days, and anticipates the absence could meet criteria in #1 below,

  3. Certification for DOE G 414.1-1B

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2010-11-18

    This certification was reviewed by the Executive Steering Committee for the Quality Assurance (QA) Directives reform and the Guide was found to be relevant, appropriate and necessary. The Guide provides the Department with non-mandatory approaches for implementing Criteria 9, Management Assessment, and Criteria 10, Independent Assessment, for DOE O 414.1C, as well as found in Title 10 Code of Federal Regulations (CFR) 830, Subpart A.

  4. Simultaneous Authentication and Certification of Arms-Control Measurement Systems

    SciTech Connect (OSTI)

    MacArthur, Duncan W. [Los Alamos National Laboratory; Hauck, Danielle K. [Los Alamos National Laboratory; Thron, Jonathan L. [Los Alamos National Laboratory

    2012-07-09

    Most arms-control-treaty-monitoring scenarios involve a host party that makes a declaration regarding its nuclear material or items and a monitoring party that verifies that declaration. A verification system developed for such a use needs to be trusted by both parties. The first concern, primarily from the host party's point of view, is that any sensitive information that is collected must be protected without interfering in the efficient operation of the facility being monitored. This concern is addressed in what can be termed a 'certification' process. The second concern, of particular interest to the monitoring party, is that it must be possible to confirm the veracity of both the measurement system and the data produced by this measurement system. The monitoring party addresses these issues during an 'authentication' process. Addressing either one of these concerns independently is relatively straightforward. However, it is more difficult to simultaneously satisfy host party certification concerns and monitoring party authentication concerns. Typically, both parties will want the final access to the measurement system. We will describe an alternative approach that allows both parties to gain confidence simultaneously. This approach starts with (1) joint development of the measurement system followed by (2) host certification of several copies of the system and (3) random selection by the inspecting party of one copy to be use during the monitoring visit and one (or more) copy(s) to be returned to the inspecting party's facilities for (4) further hardware authentication; any remaining copies are stored under joint seal for use as spares. Following this process, the parties will jointly (5) perform functional testing on the selected measurement system and then (6) use this system during the monitoring visit. Steps (1) and (2) assure the host party as to the certification of whichever system is eventually used in the monitoring visit. Steps (1), (3), (4), and (5

  5. CERTIFICATION DOCKET FOR AL-TECHSPECIALTY STEEL CORPORATION

    Office of Legacy Management (LM)

    AL-TECHSPECIALTY STEEL CORPORATION (THEFoRMERALLEGHENY-LUDLUMSTEELCORPORATION) WATERVLIET,NEWYORK,ANDOFFSITEPROPER?YIN DUNKIRK,NEWYORK Department of Energy Office of Nuciear Energy Office of Terminal Waste Disposal and Remedial Action Division of Remedial Action Projects CONTENTS Page Introduction to the Certification Docket for the Al-Tech Specialty Steel Corporation, (the Former Allegheny-Ludlum Steel Corporation) Watervliet, New York, and Offsite Property in Dunkirk, New York Purpose Docket

  6. National Certification Standard for Ground Source Heat Pump Personnel

    SciTech Connect (OSTI)

    Kelly, John

    2013-07-31

    The National Certification Standard for the Geothermal Heat Pump Industry adds to the understanding of the barriers to rapid growth of the geothermal heat pump (GHP) industry by bringing together for the first time an analysis of the roles and responsibilities of each of the individual job tasks involved in the design and installation of GHP systems. The standard addresses applicable qualifications for all primary personnel involved in the design, installation, commissioning, operation and maintenance of GHP systems, including their knowledge, skills and abilities. The resulting standard serves as a foundation for subsequent development of curriculum, training and certification programs, which are not included in the scope of this project, but are briefly addressed in the standard to describe ways in which the standard developed in this project may form a foundation to support further progress in accomplishing those other efforts. Follow-on efforts may use the standard developed in this project to improve the technical effectiveness and economic feasibility of curriculum development and training programs for GHP industry personnel, by providing a more complete and objective assessment of the individual job tasks necessary for successful implementation of GHP systems. When incorporated into future certification programs for GHP personnel, the standard will facilitate increased consumer confidence in GHP technology, reduce the potential for improperly installed GHP systems, and assure GHP system quality and performance, all of which benefit the public through improved energy efficiency and mitigated environmental impacts of the heating and cooling of homes and businesses.

  7. Plasma digital density determining device

    DOE Patents [OSTI]

    Sprott, Julien C.; Lovell, Thomas W.; Holly, Donald J.

    1976-01-01

    The density of a decaying plasma in an electrically conducting enclosure is determined by applying an excitation to the cavity formed by the enclosure and counting digitally the number of resonant frequencies traversed by the combination of the cavity and the decaying plasma.

  8. Federal Digital Strategy | OpenEI Community

    Open Energy Info (EERE)

    Federal Digital Strategy Home Graham7781's picture Submitted by Graham7781(2017) Super contributor 19 September, 2012 - 14:32 OpenEI part of the Federal Digital Strategy data...

  9. DOE Convening Report on Certification of Commercial HVAC and CRE Products |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Convening Report on Certification of Commercial HVAC and CRE Products DOE Convening Report on Certification of Commercial HVAC and CRE Products This document is the convening report on the feasibility of a negotiated rulemaking to revise the certification program for commercial HVAC and CRE products published on October 2, 2012. convening_report_hvac_cre_1.pdf (1.01 MB) More Documents & Publications Lochinvar Preliminary Plan Comments Comment On:

  10. Underwriters Laboratories now accepting certification investigation requests for E85 fuel dispensing equipment

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    MEDIA CONTACT: Joe Hirschmugl Global Media Relations Supervisor Underwriters Laboratories Phone: +1 847 830-1404 E-mail: Joseph.F.Hirschmugl@us.ul.com PRESS RELEASE FOR IMMEDIATE RELEASE Underwriters Laboratories Announces Development of Certification Requirements for E85 Dispensers Now Accepting Product Submittals for Certification Investigation NORTHBROOK, Ill. Oct. 16, 2007 - Underwriters Laboratories (UL), North America's leading safety testing and certification organization, announced the

  11. 2014-04-17 DOE Certification, Compliance, and Enforcement Overview for

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Plumbing Products | Department of Energy 4-17 DOE Certification, Compliance, and Enforcement Overview for Plumbing Products 2014-04-17 DOE Certification, Compliance, and Enforcement Overview for Plumbing Products This presentation provides an overview of DOE certification, compliance, and enforcement for plumbing products. It was presented via webinar on April 17, 2014. iapmo_pmi_training_webinar_4-17-14.pdf (270.39 KB) More Documents & Publications IAPMO/PMI CCE Overview and Update

  12. 2014-04-28 Issuance: Certification of Commercial HVAC, Water Heating, and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Refrigeration Equipment; Final Rule | Department of Energy 28 Issuance: Certification of Commercial HVAC, Water Heating, and Refrigeration Equipment; Final Rule 2014-04-28 Issuance: Certification of Commercial HVAC, Water Heating, and Refrigeration Equipment; Final Rule This document is a pre-publication Federal Register final rule regarding the certification of commercial heating, ventilation, and air-conditioning (HVAC), water heating (WH), and refrigeration (CRE) equipment, as issued by

  13. EERE Digital Data Management | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Apply for Funding » EERE Digital Data Management EERE Digital Data Management The Office of Energy Efficiency and Renewable Energy (EERE) Policy on Digital Data Management is part of the implementation of the Department of Energy's Public Access Plan and was developed in alignment with the U.S. Department of Energy (DOE) Policy on Digital Data Management. EERE's mission is to create and sustain American leadership in the transition to a global clean energy economy. EERE leads the Department of

  14. Federal Digital Strategy | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Federal Digital Strategy Federal Digital Strategy New expectations require the Federal Government to be ready to deliver and receive digital information and services anytime, anywhere and on any device. It must do so safely, securely, and with fewer resources. To build for the future, the Federal Government has developed a Digital Strategy that embraces the opportunity to innovate more with less, and enables entrepreneurs to better leverage government data to improve the quality of services to

  15. DEWI OCC Offshore and Certification Centre GmbH DEWI OCC | Open...

    Open Energy Info (EERE)

    Cuxhaven, Germany Sector: Wind energy Product: A certification body for onshore and offshore wind turbines and components, accredited by the DAP (Deutsches...

  16. Certification for DOE O 440.2C, Aviation Management and Safety...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    KB Writer: Patricia Greeson Subjects: ID: CM Type: Certification Memo OPI: MA - Office of Management Status: Current Approved Date: Jul 16, 2015 CRD: No DNFSB: No Related History...

  17. NMAC 19.14.55 Certificate of Compliance and Authorization to...

    Open Energy Info (EERE)

    5 Certificate of Compliance and Authorization to Produce Geothermal Resources (Form G-104) Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document-...

  18. The value of assessments in Lawrence Livermore National Laboratory`s Waste Certification Programs

    SciTech Connect (OSTI)

    Ryan, E.M.

    1995-05-01

    This paper will discuss the value of assessments in Lawrence Livermore National Laboratory`s Waste Certification Programs by: introducing the organization and purpose of the LLNL Waste Certification Programs for transuranic, low-level, and hazardous waste; examining the differences in internal assessment/audit requirements for these programs; discussing the values and costs of assessments in a waste certification program; presenting practical recommendations to maximize the value of your assessment programs; and presenting improvements in LLNL`s waste certification processes that resulted from assessments.

  19. Certification for DOE O 472.2 Chg 1, Personnel Security - DOE...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    guidelines, regulations, standards, OMB guidance, relevant memoranda of understanding and public laws. Certification - O 472.2 Chg 1, Personnel Security - Approved 7-15-16.pdf --...

  20. Certificate-Based Approach to Marketing Green Power and Constructing New Wind Energy Facilities: Preprint

    SciTech Connect (OSTI)

    Blank, E.; Bird, L.; Swezey, B.

    2002-05-01

    The availability of wind energy certificates in Pennsylvania's retail electricity market has made a critical difference in the economic feasibility of developing 140 MW of new wind energy projects in the region. Certificates offer important benefits to both green power suppliers and buyers by reducing transaction barriers and thus lowering the cost of renewable energy. Buyers also benefit through the increased flexibility offered by certificate products. The experience described in this paper offers important insights for selling green power certificates and achieving new wind energy development in other areas of the country.

  1. Buildings Energy Data Book: 9.3 Certification Programs

    Buildings Energy Data Book [EERE]

    3 Association of Energy Engineers Energy Auditor Certifications, by State State State Alabama 78 62 Nebraska 5 369 Alaska 50 14 Nevada 8 340 Arizona 31 209 New Hampshire 14 94 Arkansas 3 979 New Jersey 73 121 California 110 343 New Mexico 13 160 Colorado 35 146 New York 117 166 Connecticut 33 109 North Carolina 37 261 Delaware 3 302 North Dakota 4 171 D.C. 12 51 Ohio 65 178 Florida 100 191 Oklahoma 14 271 Georgia 56 175 Oregon 13 298 Hawaii 7 196 Pennsylvania 82 155 Idaho 2 792 Rhode Island 7

  2. 2014-10-06 DOE Certification, Compliance, and Enforcement Overview for

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Refrigerators, Refrigerator-Freezers, Freezers, Dehumidifiers, Room Air Conditioners, Clothes Washers, Clothes Dryers, and Dishwashers | Department of Energy 06 DOE Certification, Compliance, and Enforcement Overview for Refrigerators, Refrigerator-Freezers, Freezers, Dehumidifiers, Room Air Conditioners, Clothes Washers, Clothes Dryers, and Dishwashers 2014-10-06 DOE Certification, Compliance, and Enforcement Overview for Refrigerators, Refrigerator-Freezers, Freezers, Dehumidifiers, Room

  3. Expanding Small Wind Turbine Certification Testing - Establishment of Regional Test Centers (Poster)

    SciTech Connect (OSTI)

    Jimenez, A.; Bowen, A.; Forsyth, T.; Huskey, A.; Sinclair, K.; van Dam, J.; Smith, J.

    2010-05-01

    Presented at the WINDPOWER 2010 Conference & Exhibition, 23-26 May 2010, Dallas, Texas. The rapid growth of the small wind turbine (SWT) market is attracting numerous entrants. Small wind turbine purchasers now have many options but often lack information (such as third-party certification) to select a quality turbine. Most SWTs do not have third-party certification due to the expense and difficulty of the certification process. Until recently, the only SWT certification bodies were in Europe. In North America, testing has been limited to U.S. Department of Energy (DOE) subsidized tests conducted at the National Wind Technology Center (NWTC) under the ongoing Independent Testing Project. The goal is to increase the number of certified turbines and gain greater consumer confidence in SWT technology. To reduce certification testing costs, DOE/NREL is assisting in establishing a network of Regional Test Centers (RTCs) to conduct SWT third-party certification testing. To jump-start these RTCs, DOE/NREL is providing financial and technical assistance for an initial round of tests. The goal is to establish a lower-cost U.S. small wind testing capability that will lead to increased SWT certification. This poster describes the project, describes how it fits within broader SWT certification activities, and provides current status.

  4. Certifications and Assurances for Use with SF-424 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Assurances for Use with SF-424 Certifications and Assurances for Use with SF-424 Certifications and Assurances for Use with SF-424 (117.48 KB) More Documents & Publications Assurances - Non-Construction Programs National Policy Assurances to be Incorporated as Award Terms Microsoft Word - National Policy AssurancesAwardTermsREVJuly2005.doc

  5. An Analysis of Wind Power Development in the Town of Hull, MA_Appendix 1_MEPA Certificate

    SciTech Connect (OSTI)

    Adams, Christopher

    2013-06-30

    This appendix consists of the CERTIFICATE OF THE SECRETARY OF ENERGY AND ENVIRONMENTAL AFFAIRS ON THE ENVIRONMENTAL NOTIFICATION FORM.

  6. Final safety evaluation report related to the certification of the System 80{sup +} design (Docket No. 52-002). Volume 2, Chapters 15--22 and appendices

    SciTech Connect (OSTI)

    Not Available

    1994-08-01

    This final safety evaluation report (FSER) documents the technical review of the System 80+ standard design by the US Nuclear Regulatory Commission (NRC) staff. The application for the system 80+ design was submitted by Combustion Engineering, Inc., now Asea Brown Boveri-Combustion Engineering (ABB-CE) as an application for design approval and subsequent design certification pursuant to 10 CFR {section} 52.45. System 80+ is a pressurized water reactor with a rated power of 3914 megawatts thermal (MWt) and a design power of 3992 MWt at which accidents are analyzed. Many features of the System 80+ are similar to those of ABB-CE`s System 80 design from which it evolved. Unique features of the System 80+ design include: a large spherical, steel containment; an in-containment refueling water storage tank; a reactor cavity flooding system, hydrogen ignitors and a safety depressurization system for severe accident mitigation; a combustion gas turbine for an alternate ac source; and an advanced digitally based control room. On the basis of its evaluation and independent analyses, the NRC staff concludes that ABB-CE`s application for design certification meets the requirements of Subpart B of 10 CFR Part 52 that are applicable and technically relevant to the System 80+ standard design. This document, Volume 2, contains Chapters 15 through 22 and Appendices A through E.

  7. Final safety evaluation report related to the certification of the System 80{sup +} design (Docket No. 52-002). Volume 1, Chapters 1--14

    SciTech Connect (OSTI)

    Not Available

    1994-08-01

    This final safety evaluation report (FSER) documents the technical review of the System 80+ standard design by the US Nuclear Regulatory Commission (NRC) staff. The application for the System 80+ design was submitted by Combustion Engineering, Inc., now Asea Brown Boveri-Combustion Engineering (ABB-CE) as an application for design approval and subsequent design certification pursuant to 10 CFR {section} 52.45. System 80+ is a pressurized water reactor with a rated power of 3914 megawatts thermal (MWt) and a design power of 3992 MWt at which accidents are analyzed. Many features of the System 80+ are similar to those of Abb-CE`s System 80 design from which it evolved. Unique features of the System 80+ design included: a large spherical, steel containment; an in-containment refueling water storage tank; a reactor cavity flooding system, hydrogen ignitors, and a safety depressurization system for severe accident mitigation; a combustion gas turbine for an alternate ac source; and an advanced digitally based control room. On the basis of its evaluation and independent analyses, the NRC staff concludes that ABB-CE`s application for design certification meets the requirements of Subpart B of 10 CFR Part 52 that are applicable and technically relevant to the System 80+ standard design. This document, Volume 1, contains Chapters 1 through 14 of this report.

  8. The certification process for tritium operators at TFTR

    SciTech Connect (OSTI)

    Gentile, C.A.; Murphy, S.E.; LaMarche, P.H.; Contino, A.M.; Gordon, S.

    1995-12-31

    The TFTR project, in concert with the PPPL Office of Certification and Training (OC and T), has established a program by which Tritium Operations Personnel are certified for their respective positions in accordance with DOE Order 5480.20A Personnel Selection, Qualification, and Training at DOE Nuclear Facilities and DOE Order 5480.19 conduct of Operations Requirements for DOE Facilities. The certification process commences during the candidate`s interview for the position of TFTR Tritium Operator. Prior to accepting a candidate into the tritium operation program, a detailed educational and work experience record is constructed for the candidate, including an interview by OC and T personnel to assess the candidates credentials and ability to successfully complete the program. The typical successful candidate for the position of TFTR Tritium Operator has worked in the nuclear or chemical industry for several years, and in many cases possess a college degree. A US Nuclear Navy background is quite common for many of the applicants. Candidates complete the program in 4 to 6 months, and typically move into supervisory positions (Tritium Shift Supervisors) within 2 to 3 years.

  9. Seismic Analysis Issues in Design Certification Applications for New Reactors

    SciTech Connect (OSTI)

    Miranda, M.; Morante, R.; Xu, J.

    2011-07-17

    The licensing framework established by the U.S. Nuclear Regulatory Commission under Title 10 of the Code of Federal Regulations (10 CFR) Part 52, “Licenses, Certifications, and Approvals for Nuclear Power Plants,” provides requirements for standard design certifications (DCs) and combined license (COL) applications. The intent of this process is the early reso- lution of safety issues at the DC application stage. Subsequent COL applications may incorporate a DC by reference. Thus, the COL review will not reconsider safety issues resolved during the DC process. However, a COL application that incorporates a DC by reference must demonstrate that relevant site-specific de- sign parameters are within the bounds postulated by the DC, and any departures from the DC need to be justified. This paper provides an overview of several seismic analysis issues encountered during a review of recent DC applications under the 10 CFR Part 52 process, in which the authors have participated as part of the safety review effort.

  10. Structural Design Challenges in Design Certification Applications for New Reactors

    SciTech Connect (OSTI)

    Miranda, M.; Braverman, J.; Wei, X.; Hofmayer, C.; Xu, J.

    2011-07-17

    The licensing framework established by the U.S. Nuclear Regulatory Commission under Title 10 of the Code of Federal Regulations (10 CFR) Part 52, “Licenses, Certifications, and Approvals for Nuclear Power Plants,” provides requirements for standard design certifications (DCs) and combined license (COL) applications. The intent of this process is the early reso- lution of safety issues at the DC application stage. Subsequent COL applications may incorporate a DC by reference. Thus, the COL review will not reconsider safety issues resolved during the DC process. However, a COL application that incorporates a DC by reference must demonstrate that relevant site-specific de- sign parameters are confined within the bounds postulated by the DC, and any departures from the DC need to be justified. This paper provides an overview of structural design chal- lenges encountered in recent DC applications under the 10 CFR Part 52 process, in which the authors have participated as part of the safety review effort.

  11. Certification Framework Based on Effective Trapping for Geologic Carbon Sequestration

    SciTech Connect (OSTI)

    Oldenburg, Curtis M.; Bryant, Steven L.; Nicot, Jean-Philippe

    2009-01-15

    We have developed a certification framework (CF) for certifying the safety and effectiveness of geologic carbon sequestration (GCS) sites. Safety and effectiveness are achieved if CO{sub 2} and displaced brine have no significant impact on humans, other living things, resources, or the environment. In the CF, we relate effective trapping to CO{sub 2} leakage risk which takes into account both the impact and probability of leakage. We achieve simplicity in the CF by using (1) wells and faults as the potential leakage pathways, (2) compartments to represent environmental resources that may be impacted by leakage, (3) CO{sub 2} fluxes and concentrations in the compartments as proxies for impact to vulnerable entities, (4) broad ranges of storage formation properties to generate a catalog of simulated plume movements, and (5) probabilities of intersection of the CO{sub 2} plume with the conduits and compartments. We demonstrate the approach on a hypothetical GCS site in a Texas Gulf Coast saline formation. Through its generality and flexibility, the CF can contribute to the assessment of risk of CO{sub 2} and brine leakage as part of the certification process for licensing and permitting of GCS sites around the world regardless of the specific regulations in place in any given country.

  12. Digital electronic bone growth stimulator

    DOE Patents [OSTI]

    Kronberg, James W.

    1995-01-01

    A device for stimulating bone tissue by applying a low level alternating current signal directly to the patient's skin. A crystal oscillator, a binary divider chain and digital logic gates are used to generate the desired waveforms that reproduce the natural electrical characteristics found in bone tissue needed for stimulating bone growth and treating osteoporosis. The device, powered by a battery, contains a switch allowing selection of the correct waveform for bone growth stimulation or osteoporosis treatment so that, when attached to the skin of the patient using standard skin contact electrodes, the correct signal is communicated to the underlying bone structures.

  13. Digital electronic bone growth stimulator

    DOE Patents [OSTI]

    Kronberg, J.W.

    1995-05-09

    A device is described for stimulating bone tissue by applying a low level alternating current signal directly to the patient`s skin. A crystal oscillator, a binary divider chain and digital logic gates are used to generate the desired waveforms that reproduce the natural electrical characteristics found in bone tissue needed for stimulating bone growth and treating osteoporosis. The device, powered by a battery, contains a switch allowing selection of the correct waveform for bone growth stimulation or osteoporosis treatment so that, when attached to the skin of the patient using standard skin contact electrodes, the correct signal is communicated to the underlying bone structures. 5 figs.

  14. Digital Gas Inc | Open Energy Information

    Open Energy Info (EERE)

    Gas Inc Jump to: navigation, search Name: Digital Gas Inc Place: Dallas, Texas Sector: Solar Product: Company with a number of subsidiaries involved in mining, solar power, waste...

  15. Axial Tomography from Digitized Real Time Radiography

    DOE R&D Accomplishments [OSTI]

    Zolnay, A. S.; McDonald, W. M.; Doupont, P. A.; McKinney, R. L.; Lee, M. M.

    1985-01-18

    Axial tomography from digitized real time radiographs provides a useful tool for industrial radiography and tomography. The components of this system are: x-ray source, image intensifier, video camera, video line extractor and digitizer, data storage and reconstruction computers. With this system it is possible to view a two dimensional x-ray image in real time at each angle of rotation and select the tomography plane of interest by choosing which video line to digitize. The digitization of a video line requires less than a second making data acquisition relatively short. Further improvements on this system are planned and initial results are reported.

  16. Digital Power Capital LLC | Open Energy Information

    Open Energy Info (EERE)

    Capital LLC Jump to: navigation, search Name: Digital Power Capital LLC Place: Greenwich, Connecticut Zip: 6830 Product: A private equity firm focused on new technologies that...

  17. Half Metallic Digital Ferromagnetic Heterostructure Composed...

    Office of Scientific and Technical Information (OSTI)

    Citation Details In-Document Search Title: Half Metallic Digital Ferromagnetic ... originating from hybridized Mn-d and nearest-neighbor Si-p states, and the corresponding ...

  18. Digital Surveying Directional Surveying Specialists | Open Energy...

    Open Energy Info (EERE)

    Surveying Specialists Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Digital Surveying Directional Surveying Specialists Author Directional Surveying...

  19. Half Metallic Digital Ferromagnetic Heterostructure Composed...

    Office of Scientific and Technical Information (OSTI)

    The authors propose and investigate the properties of a digital ferromagnetic ... Letters, vol. 96, NA, January 19, 2006, pp. 027211; Journal Volume: 96 Research Org: ...

  20. Digital Mapping Of Structurally Controlled Geothermal Features...

    Open Energy Info (EERE)

    GPS Units And Pocket Computers Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: Digital Mapping Of Structurally Controlled Geothermal Features...

  1. Digital Data Management Requirements | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Requirements Digital Data Management Requirements To integrate data management planning into an overall research plan, the following requirements will apply to all Office of Energy ...

  2. Digital Data Management Roles and Responsibilities | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Digital Data Management Roles and Responsibilities The roles and responsibilities associated with Office of Energy Efficiency and Renewable Energy (EERE) data management plans ...

  3. Digital Data Management Frequently Asked Questions | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Frequently Asked Questions Digital Data Management Frequently Asked Questions Submitting a Data Management Plan 1. I am submitting an applicationproposal for research funding in ...

  4. Advanced light water reactor plants System 80+{trademark} design certification program. Annual progress report, October 1, 1995--September 30, 1996

    SciTech Connect (OSTI)

    1996-12-31

    The purpose of this report is to provide a status of the progress that was made towards Design Certification of System 80+{trademark} during the US government`s 1996 fiscal year. The System 80+ Advanced Light Water Reactor (ALWR) is a 3931 MW (1350 MWe) Pressurized Water Reactor (PWR). The design covers an essentially complete plant. It is based on EPRI ALWR Utility Requirements Document (URD) improvements to the Standardized System 80 Nuclear Steam Supply System (NSSS) in operation at Palo Verde Units 1, 2 and 3. The NSSS is a traditional two-loop arrangement with two steam generators, two hot legs and four cold legs, each with a reactor coolant pump. The System 80+ standard design houses the NSSS in a spherical steel containment vessel which is enclosed in a concrete shield building, thus providing the safety advantages of a dual barrier to radioactivity release. Other major features include an all-digital, human-factors-engineered control room, an alternate electrical AC power source, an In-Containment Refueling Water Storage Tank (IRWST), and plant arrangements providing complete separation of redundant trains in safety systems.

  5. Advanced light water reactor plants System 80+{trademark} design certification program. Annual progress report, October 1, 1994--September 30, 1995

    SciTech Connect (OSTI)

    1998-09-01

    The purpose of this report is to provide the status of the progress that was made towards Design Certification of System 80+{trademark} during the US government`s 1995 fiscal year. The System 80+ Advanced Light Water Reactor (ALWR) is a 3931 MW (1350 MWe) Pressurized Water Reactor (PWR). The design covers an essentially complete plant. It is based on EPRI ALWR Utility Requirements Document (URD) improvements to the Standardized System 80 Nuclear Steam Supply System (NSSS) in operation at Palo Verde Units 1, 2, and 3. The NSSS is a traditional two-loop arrangement with two steam generators, two hot legs and four cold legs, each with a reactor coolant pump. The System 80+ standard design houses the NSSS in a spherical steel containment vessel which is enclosed in a concrete shield building, thus providing the safety advantages of a dual barrier to radioactivity release. Other major features include an all-digital, human-factors-engineered control room, an alternate electrical AC power source, an In-Containment Refueling Water Storage Tank (IRWST), and plant arrangements providing complete separation of redundant trains in safety systems.

  6. Certification for Small Wind Turbine Installers: What's the Hang Up?; Preprint

    SciTech Connect (OSTI)

    Oteri, F.; Sinclair, K.

    2012-03-01

    Several programs have been implemented to support the advancement of a professional, mature small wind industry and to ensure that this industry moves forward in a sustainable direction. The development of a standard for small wind turbine systems and the creation of the Small Wind Certification Council support small wind technology that is reliable and safe. Consumers and incentive programs will ultimately rely on certification to differentiate among systems sold in the U.S. market. Certification of small wind installers is yet another component deemed necessary for this industry to expand. The National Renewable Energy Laboratory, under the guidance and funding support of the U.S. Department of Energy, supported the development of small wind system installer certification provided via the North American Board of Certified Energy Practitioners. However, the small wind community is not supportive of the installer certification. There are currently only nine certified installers in the U.S. pool. This paper provides an overview of the installer certification program and why more small wind turbine installers are not pursuing this certification.

  7. Public/private key certification authority and key distribution. Draft

    SciTech Connect (OSTI)

    Long, J.P.; Christensen, M.J.; Sturtevant, A.P.; Johnston, W.E.

    1995-09-25

    Traditional encryption, which protects messages from prying eyes, has been used for many decades. The present concepts of encryption are built from that heritage. Utilization of modern software-based encryption techniques implies much more than simply converting files to an unreadable form. Ubiquitous use of computers and advances in encryption technology coupled with the use of wide-area networking completely changed the reasons for utilizing encryption technology. The technology demands a new and extensive infrastructure to support these functions. Full understanding of these functions, their utility and value, and the need for an infrastructure, takes extensive exposure to the new paradigm. This paper addresses issues surrounding the establishment and operation of a key management system (i.e., certification authority) that is essential to the successful implementation and wide-spread use of encryption.

  8. Solar Renewable Energy Certificate (SREC) Markets: Status and Trends

    SciTech Connect (OSTI)

    Bird, L.; Heeter, J.; Kreycik, C.

    2011-11-01

    This paper examines experience in solar renewable energy certificate (SREC) markets in the United States. It describes how SREC markets function--key policy design provisions, eligible technologies, state and regional eligibility rules, solar alternative compliance payments, measurement and verification methods, long-term contracting provisions, and rate caps. It also examines the trends of SREC markets--trading volumes, sourcing trends, trends in the size of solar photovoltaic (PV) systems driven by these markets, and trends in price and compliance. Throughout, the paper explores key issues and challenges facing SREC markets and attempts by policymakers to address some of these market barriers. Data and information presented in this report are derived from SREC tracking systems, brokers and auctions, published reports, and information gleaned from market participants and interviews with state regulators responsible for SREC market implementation. The last section summarizes key findings.

  9. V-165: Cisco WebEx for iOS Certificate Validation Flaw Lets Remote Users

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Spoof the Server | Department of Energy 65: Cisco WebEx for iOS Certificate Validation Flaw Lets Remote Users Spoof the Server V-165: Cisco WebEx for iOS Certificate Validation Flaw Lets Remote Users Spoof the Server May 28, 2013 - 12:46am Addthis PROBLEM: Cisco WebEx for iOS Certificate Validation Flaw Lets Remote Users Spoof the Server PLATFORM: Cisco WebEx for iOS 4.1, Other versions may also be affected. ABSTRACT: A vulnerability was reported in Cisco WebEx for iOS. REFERENCE LINKS:

  10. EVMS Training Snippet: 1.7 DOE EVMS Certification | Department of Energy

    Office of Environmental Management (EM)

    7 DOE EVMS Certification EVMS Training Snippet: 1.7 DOE EVMS Certification This EVMS Training Snippet, sponsored by the Office of Project Management (PM), covers the DOE Earned Value Management Systems Certification process. Link to Video Presentation (27:45) | Prior Snippet (1.6) | Next Snippet (1.8) | Return to Index Slides Only (435.57 KB) Slides with Notes (2.54 MB) Key Resources PMCDP EVMS PARS IIe FPD Resource Center PM Newsletter Forms and Templates More Documents & Publications EVMS

  11. RF digital-to-analog converter

    DOE Patents [OSTI]

    Conway, P.H.; Yu, D.U.L.

    1995-02-28

    A digital-to-analog converter is disclosed for producing an RF output signal proportional to a digital input word of N bits from an RF reference input, N being an integer greater or equal to 2. The converter comprises a plurality of power splitters, power combiners and a plurality of mixers or RF switches connected in a predetermined configuration. 18 figs.

  12. RF digital-to-analog converter

    DOE Patents [OSTI]

    Conway, Patrick H.; Yu, David U. L.

    1995-01-01

    A digital-to analogue converter for producing an RF output signal proportional to a digital input word of N bits from an RF reference input, N being an integer greater or equal to 2. The converter comprises a plurality of power splitters, power combiners and a plurality of mixers or RF switches connected in a predetermined configuration.

  13. Optical analog-to-digital converter

    DOE Patents [OSTI]

    Vawter, G. Allen; Raring, James; Skogen, Erik J.

    2009-07-21

    An optical analog-to-digital converter (ADC) is disclosed which converts an input optical analog signal to an output optical digital signal at a sampling rate defined by a sampling optical signal. Each bit of the digital representation is separately determined using an optical waveguide interferometer and an optical thresholding element. The interferometer uses the optical analog signal and the sampling optical signal to generate a sinusoidally-varying output signal using cross-phase-modulation (XPM) or a photocurrent generated from the optical analog signal. The sinusoidally-varying output signal is then digitized by the thresholding element, which includes a saturable absorber or at least one semiconductor optical amplifier, to form the optical digital signal which can be output either in parallel or serially.

  14. The Digital Revolution in Measurements

    SciTech Connect (OSTI)

    Kirkham, Harold

    2013-02-27

    This paper considers what it means to make a measurement, and the changes in measurement technology over the years. The impact of the latest changes, which have resulted in most electrical measurements being done digitally, is explored. It is argued that the process of measurement can be considered equivalent to one of data compression. The smart grid will certainly result in many more signals being made available, and therefore a great deal of data compression will be taking place. Measurements will be made in parts of the power system presently unmonitored, as well as parts that are already well covered by instrumentation. The smart grid engineer must decide what it means to have “useful” information. Unless care is taken, the signal processing may furnish information that is not useful, and may not even make sense. The paper concludes by examining the possibilities of data compression from multiple separate signals.

  15. Lessons learned in digital upgrade projects digital control system implementation at US nuclear power stations

    SciTech Connect (OSTI)

    Kelley, S.; Bolian, T. W.

    2006-07-01

    AREVA NP has gained significant experience during the past five years in digital upgrades at operating nuclear power stations in the US. Plants are seeking modernization with digital technology to address obsolescence, spare parts availability, vendor support, increasing age-related failures and diminished reliability. New systems offer improved reliability and functionality, and decreased maintenance requirements. Significant lessons learned have been identified relating to the areas of licensing, equipment qualification, software quality assurance and other topics specific to digital controls. Digital control systems have been installed in non safety-related control applications at many utilities within the last 15 years. There have also been a few replacements of small safety-related systems with digital technology. Digital control systems are proving to be reliable, accurate, and easy to maintain. Digital technology is gaining acceptance and momentum with both utilities and regulatory agencies based upon the successes of these installations. Also, new plants are being designed with integrated digital control systems. To support plant life extension and address obsolescence of critical components, utilities are beginning to install digital technology for primary safety-system replacement. AREVA NP analyzed operating experience and lessons learned from its own digital upgrade projects as well as industry-wide experience to identify key issues that should be considered when implementing digital controls in nuclear power stations.

  16. Accredited Certifications Bring a Higher Level of Quality to the Weatherization Industry

    Office of Energy Efficiency and Renewable Energy (EERE)

    With the announcement of the newly accredited Home Energy Professional certifications, the U.S. Department of Energy (DOE) continues to reaffirm its commitment to supporting an effective and highly skilled weatherization workforce.

  17. V-165: Cisco WebEx for iOS Certificate Validation Flaw Lets Remote...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The security issue is caused due to the application not properly verifying the server SSL certificate. This can be exploited to e.g. spoof the server via a MitM (Man-in-the-Middle) ...

  18. Texas TUC 37.051, Certificate of Convenience and Necessity Requirement...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Legal Document- RegulationRegulation: Texas TUC 37.051, Certificate of Convenience and Necessity RequirementsLegal Abstract...

  19. DOE Extends Comment Period on Certification and Enforcement Notice of Proposed Rulemaking

    Broader source: Energy.gov [DOE]

    In response to a formal request, the Department has extended to October 29, 2010, the deadline for submission of comments in response to the Notice or Proposed Rulemaking on the certification and...

  20. Comparison of Wind-Turbine Aeroelastic Codes Used for Certification: Preprint

    SciTech Connect (OSTI)

    Buhl, M. L., Jr.; Manjock, A.

    2006-01-01

    NREL created aeroelastic simulators for horizontal-axis wind turbines accepted by Germanischer Lloyd (GL) WindEnergie GmbH for manufacturers to use for on-shore wind turbine certification.

  1. DOE/Mitsubishi Enter Consent Decree Dismissing Claims of Certification Violations

    Broader source: Energy.gov [DOE]

    On May 7, 2010, DOE entered into a Consent Decree with Mitsubishi Electric & Electronics, USA Inc. dismissing alleged energy efficiency certification violations in return for a $5000 voluntary...

  2. DOE Resolves Nearly All of its September 2010 Certification Enforcement Actions

    Broader source: Energy.gov [DOE]

    The Energy Department's new Office of Enforcement, part of the General Counsel's Office, announced today that it has now successfully resolved 26 of the 30 certification enforcement cases brought...

  3. U.A.C. R317-15: Water Quality Certification | Open Energy Information

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Legal Document- RegulationRegulation: U.A.C. R317-15: Water Quality CertificationLegal Abstract This rule establishes procedures for...

  4. Cook Composites and Polymers Company Achieves Superior Energy Performance Gold Certification

    SciTech Connect (OSTI)

    2011-06-30

    The case study highlights a Cook Composites and Polymers Co. (CCP) plant in Houston, Texas as one of the first participants in the Superior Energy Performance (SEP) plant certification pilot program.

  5. 5 CCR 1002-82 401 Certification Regulation | Open Energy Information

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Legal Document- RegulationRegulation: 5 CCR 1002-82 401 Certification RegulationLegal Abstract Implementing regulations that...

  6. Colorado - C.R.S. 40-5-103, Certificate-Application for-Issuance...

    Open Energy Info (EERE)

    Colorado - C.R.S. 40-5-103, Certificate-Application for-Issuance Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: Colorado -...

  7. H.R.S. 269-7.5 - Certificates of Public Convenience and Necessity...

    Open Energy Info (EERE)

    -7.5 - Certificates of Public Convenience and Necessity Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: H.R.S. 269-7.5 -...

  8. 16 TAC, part 1, chapter 3, rule 3.93 Water Quality Certification...

    Open Energy Info (EERE)

    93 Water Quality Certification Definitions Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- RegulationRegulation: 16 TAC, part 1, chapter 3, rule...

  9. File:08-ID-c - Certificate of Public Convenience and Necessity...

    Open Energy Info (EERE)

    modified from its original state, some details may not fully reflect the modified file. Image title Lucidchart Author None Short title 08-ID-c - Certificate of Public Convenience...

  10. ARM 17-30-101 - Water Quality: 401 Certification | Open Energy...

    Open Energy Info (EERE)

    30-101 - Water Quality: 401 Certification Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- RegulationRegulation: ARM 17-30-101 - Water Quality:...

  11. O.A.R. 345-015 - Energy Facility Siting Council Site Certification...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Legal Document- RegulationRegulation: O.A.R. 345-015 - Energy Facility Siting Council Site Certification ProceduresLegal...

  12. O.A.R. 345-021 - Application for Site Certification | Open Energy...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Legal Document- RegulationRegulation: O.A.R. 345-021 - Application for Site CertificationLegal Abstract These administrative...

  13. Methods and systems for detecting abnormal digital traffic (Patent...

    Office of Scientific and Technical Information (OSTI)

    Methods and systems for detecting abnormal digital traffic Title: Methods and systems for detecting abnormal digital traffic Aspects of the present invention encompass methods and ...

  14. The Digital Road to Scientific Knowledge Diffusion; A Faster...

    Office of Scientific and Technical Information (OSTI)

    The Digital Road to Scientific Knowledge Diffusion; A Faster, Better Way to Scientific Progress? Citation Details In-Document Search Title: The Digital Road to Scientific Knowledge ...

  15. Improved Engine Control Strategies Enabled by Digital Signal...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Engine Control Strategies Enabled by Digital Signal-Processing Method for Zirconia Exhaust Sensors Improved Engine Control Strategies Enabled by Digital Signal-Processing Method ...

  16. The Sloan Digital Sky Survey Monitor Telescope Pipeline (Journal...

    Office of Scientific and Technical Information (OSTI)

    The Sloan Digital Sky Survey Monitor Telescope Pipeline Citation Details In-Document Search Title: The Sloan Digital Sky Survey Monitor Telescope Pipeline You are accessing a...

  17. SEARCH FOR SUPERMASSIVE BLACK HOLE BINARIES IN THE SLOAN DIGITAL...

    Office of Scientific and Technical Information (OSTI)

    THE SLOAN DIGITAL SKY SURVEY SPECTROSCOPIC SAMPLE Citation Details In-Document Search Title: SEARCH FOR SUPERMASSIVE BLACK HOLE BINARIES IN THE SLOAN DIGITAL SKY SURVEY ...

  18. DOE Policy for Digital Research Data Management | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Policy for Digital Research Data Management The Department of Energy (DOE) is ... Here, data management involves all stages of the digital data lifecycle including capture, ...

  19. Digital Data Management Additional Guidance | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Additional Guidance Digital Data Management Additional Guidance Beyond the Office of Energy Efficiency and Renewable Energy (EERE) digital data management requirements, the ...

  20. Conflict-of-Interest/Non-Disclosure Certificate For Reviewers Involved in

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the Selection of Subcontractors for NEUP Research and Development Funds | Department of Energy Conflict-of-Interest/Non-Disclosure Certificate For Reviewers Involved in the Selection of Subcontractors for NEUP Research and Development Funds Conflict-of-Interest/Non-Disclosure Certificate For Reviewers Involved in the Selection of Subcontractors for NEUP Research and Development Funds The Department of Energy has a policy that individuals with a conflict of interest cannot participate in the

  1. Microsoft Word - Smart Grid Certification and Labeling Program 09-11-2009 _3_.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NETL Modern Grid Strategy Powering our 21st-Century Economy SMART GRID CERTIFICATION AND LABELING Conducted by National Energy Technology Laboratory for the U.S. Department of Energy Office of Electricity Delivery and Energy Reliability September 2009 Office of Electricity Delivery and Energy Reliability Smart Grid Certification and Labeling 1 DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor

  2. Earning SEP Silver Certification Leads MedImmune to Significant Savings |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Technical Assistance » Superior Energy Performance » Earning SEP Silver Certification Leads MedImmune to Significant Savings Earning SEP Silver Certification Leads MedImmune to Significant Savings August 4, 2016 - 3:44pm Addthis A recently published case study demonstrates the value that Superior Energy Performance® (SEP(tm)) offers companies in the biopharmaceutical sector. The case study features MedImmune, a global biologics research and development arm of

  3. DOE Convening Report on Certification of Commercial HVAC and CRE Products

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Convening Report on Certification of Commercial HVAC and CRE Products, October 2, 2012 1 U.S. DEPARTMENT OF ENERGY CONVENING REPORT ON THE FEASIBILITY OF A NEGOTIATED RULEMAKING TO REVISE THE CERTIFICATION PROGRAM FOR COMMERCIAL HEATING, VENTILATING AIR CONDITIONING AND COMMERCIAL REFRIGERATION EQUIPMENT October 2, 2012 Alan W. Strasser, Esq., MA Convener On detail to: Office of the General Counsel U.S. Department of Energy (GC-71) 1000 Independence Avenue, SW Washington, DC 20585 From: U.S.

  4. ChemCam sends digital 'thumbs up'

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ChemCam sends digital 'thumbs up' ChemCam sends digital 'thumbs up' Members of the team got a digital thumbs up about the operational readiness of their instrument just hours after the rover landed on Martian soil. August 8, 2012 Researchers from LANL and the French Space Agency examine data from the Mars Science Laboratory Curiosity rover from inside the ChemCam Operations Center at NASA's Jet Propulsion Laboratory on Monday, Aug. 6, 2012, less than a day after the rover landed on Mars. The

  5. Digital electronic bone growth stimulator

    DOE Patents [OSTI]

    Kronberg, J.W.

    1993-01-01

    The present invention relates to the electrical treatment of biological tissue. In particular, the present invention discloses a device that produces discrete electrical pulse trains for treating osteoporosis and accelerating bone growth. According to its major aspects and broadly stated, the present invention consists of an electrical circuit configuration capable of generating Bassett-type waveforms shown with alternative signals provide for the treatment of either fractured bones or osteoporosis. The signal generator comprises a quartz clock, an oscillator circuit, a binary divider chain, and a plurality of simple, digital logic gates. Signals are delivered efficiently, with little or no distortion, and uniformly distributed throughout the area of injury. Perferably, power is furnished by widely available and inexpensive radio batteries, needing replacement only once in several days. The present invention can be affixed to a medical cast without a great increase in either weight or bulk. Also, the disclosed stimulator can be used to treat osteoporosis or to strengthen a healing bone after the cast has been removed by attaching the device to the patient`s skin or clothing.

  6. Digital radiography: a focus on clinical utility

    SciTech Connect (OSTI)

    Price, R.R.; Rollo, F.D.; Monahan, W.G.; James, A.E. Jr.

    1982-01-01

    This book is interesting and timely in that it covers the new and exciting area of digital radiography. The book begins with chapters on the physics, instrumentation, and terminology of digital radiography. Then cost-benefit ratios, legal implication, and outpatient vs. inpatient studies are discussed. The clinical chapters follow. These are applicable to the head and neck, heart, lungs, kidneys, peripheral arteries, and pediatric population. Discussion then centers on intraarterial digital subtraction, clinical experience at Wisconsin, nonangiography application of digital radiology in children, and analog film-screen subtraction intravenous angiography. The book ends by briefly discussing microwave imaging, nuclear magnetic resonance, emission tomography, real-time and Doppler sonography, analog tomography, and the future photoelectric radiology department.

  7. WIPP Compliance Certification Application calculations parameters. Part 2: Parameter documentation

    SciTech Connect (OSTI)

    Howarth, S.M.

    1997-11-14

    The Waste Isolation Pilot Plant (WIPP) in southeast New Mexico has been studied as a transuranic waste repository for the past 23 years. During this time, an extensive site characterization, design, construction, and experimental program was completed, which provided in depth understanding of the dominant processes that are most likely to influence the containment of radionuclides for 10,000 years. Nearly 1,500 parameters were developed using information gathered from this program and were input to numerical models for WIPP Compliance Certification Application (CCA) Performance Assessment (PA) calculations. The CCA probability models require input parameters that are defined by a statistical distribution. Developing parameters begins with the assignment of an appropriate distribution type, which is dependent on the type, magnitude, and volume of data or information available. Parameter development may require interpretation or statistical analysis of raw data, combining raw data with literature values, scaling laboratory or field data to fit code grid mesh sizes, or other transformations. Documentation of parameter development is designed to answer two questions: What source information was used to develop this parameter? and Why was this particular data set/information used? Therefore, complete documentation requires integrating information from code sponsors, parameter task leaders, performance assessment analysts, and experimental principal investigators. This paper, Part 2 of 2 parts, contains a discussion of the WIPP CCA PA Parameter Tracking System, document traceability and retrievability, and lessons learned from related audits and reviews.

  8. Reference material manufacture and certification for the AVNG

    SciTech Connect (OSTI)

    Hauck, Danielle K; Mac Arthur, Duncan; Thron, Jonathan L; Livke, Alexander; Kondratov, Sergey; Razinkov, Sergey

    2010-01-01

    Testing and demonstration of any radiation measurement system requires the use of appropriate radioactive sources. The AVNG implementation that we describe is an attribute measurement system built by RFNC - VNIIEF in Sarov, Russia. The AVNG detects neutron and gamma radiation signatures and displays the three unclassified attributes of 'plutonium presence,' 'plutonium mass > 2 kg,' and 'plutonium isotopic ratio ({sup 240}Pu to {sup 239}Pu) < 0.1.' The AVNG was tested using a number of reference material (RM) sources with masses and isotopic ratios above and below these thresholds. The AVNG was demonstrated in June 2009 using several of these sources in addition to detector calibration sources. Since the AVNG was designed to measure multi-kg plutonium sources, the RM was manufactured specifically for use with this system. In addition, the RM was used to test the thresholds in the AVNG, so the size and composition of each RM was certified prior to use. In this presentation, we will describe the various steps in the manufacture and certification of these RM sources.

  9. TRU waste certification and TRUPACT-2 payload verification

    SciTech Connect (OSTI)

    Hunter, E.K. . Waste Isolation Pilot Plant Project Office); Johnson, J.E. . Waste Isolation Div.)

    1990-01-01

    The Waste Isolation Pilot Plant (WIPP) established a policy that requires each waste shipper to verify that all waste shipments meet the requirements of the Waste Acceptance Criteria (WAC) prior to being shipped. This verification provides assurance that transuranic (TRU) wastes meet the criteria while still retained in a facility where discrepancies can be immediately corrected. Each Department of Energy (DOE) TRU waste facility planning to ship waste to the Waste Isolation Pilot Plant (WIPP) is required to develop and implement a specific program including Quality Assurance (QA) provisions to verify that waste is in full compliance with WIPP's WAC. This program is audited by a composite DOE and contractor audit team prior to granting the facility permission to certify waste. During interaction with the Nuclear Regulatory Commission (NRC) on payload verification for shipping in TRUPACT-II, a similar system was established by DOE. The TRUPACT-II Safety Analysis Report (SAR) contains the technical requirements and physical and chemical limits that payloads must meet (like the WAC). All shippers must plan and implement a payload control program including independent QA provisions. A similar composite audit team will conduct preshipment audits, frequent subsequent audits, and operations inspections to verify that all TRU waste shipments in TRUPACT-II meet the requirements of the Certificate of Compliance issued by the NRC which invokes the SAR requirements. 1 fig.

  10. New Whole-House Solutions Case Study: Meeting DOE Challenge Home Program Certification - Chicago, IL; Denver, CO; Devens, MA

    SciTech Connect (OSTI)

    2015-01-01

    In this project, three production home builders—K. Hovnanian Homes, David Weekley Homes, and Transformations, Inc.—partnered with Building America team Building Science Corporation to evaluate the certification of five test homes to the new DOE Challenge Home program performance standard (now DOE Zero Energy Ready Home program). The builders identified key benefits and barriers that impacted the certification of the test homes, and the likelihood of whether DOE Challenge Home certification would be pursued in future homes

  11. Daylighting Digital Dimmer | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Daylighting Digital Dimmer Daylighting Digital Dimmer Lead Performer: MoJo Labs Inc. - Longmont, CO DOE Total Funding: $992,918 Project Term: July 28, 2015 - July 27, 2017 Funding Opportunity: FY2015 Phase II Release 2 SBIR Awards PROJECT OBJECTIVE The novel solid-state lighting control architecture successfully demonstrated during the Phase I effort produced a product called the RiteBriteTM, which uses a patent-pending technology called Task-to-Wall (TTW) Translation. It provides

  12. File:UST Registration and Self-Certification Form 0724.pdf |...

    Open Energy Info (EERE)

    this file. Metadata This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from...

  13. Everything Digital: Converting the world in 2 Exabytes

    SciTech Connect (OSTI)

    Lesk, Michael

    2003-11-05

    Nearly everything created today is in digital format: music is on digital CDs, documents come from word processing, still photography is switching to digital cameras and even movies are now edited digitally. What about the past? We have projects like the Million Book Project scanning one million books, and we know technically how to convert everything: the problems are legal, economic and organizational.

  14. Concurrent signal combining and channel estimation in digital communications

    DOE Patents [OSTI]

    Ormesher, Richard C.; Mason, John J.

    2011-08-30

    In the reception of digital information transmitted on a communication channel, a characteristic exhibited by the communication channel during transmission of the digital information is estimated based on a communication signal that represents the digital information and has been received via the communication channel. Concurrently with the estimating, the communication signal is used to decide what digital information was transmitted.

  15. "Order Module--DOE O 426.2, PERSONNEL SELECTION, TRAINING, QUALIFICATION, AND CERTIFICATION REQUIREMENTS FOR DOE NUCLEAR FACILITIES

    Broader source: Energy.gov [DOE]

    "To establish selection, training, qualification, and certification requirements for contractor personnel who can impact the safety basis through their involvement in the operation, maintenance,...

  16. Appliance Standards Update and Review of Certification, Compliance and Enforcement Powerpoint Presentation for ASHRAE Conference, January 31, 2011

    Office of Energy Efficiency and Renewable Energy (EERE)

    This document is Appliance Standards Update and Review of Certification, Compliance and Enforcement Powerpoint Presentation for ASHRAE Conference, January 31, 2011

  17. Engineering Assessment and Certification of Integrity Lawrence Livermore National Laboratory - 321-R2 Tank System - April 2015

    SciTech Connect (OSTI)

    Abri, M.; Griffin, D.

    2015-05-28

    This Engineering Assessment and Certification of Integrity of retention tank system 321-R2 has been prepared for tank systems that store hazardous waste and have secondary containment.

  18. Hazardous Waste Certification Plan: Hazardous Waste Handling Facility, Lawrence Berkeley Laboratory

    SciTech Connect (OSTI)

    Not Available

    1992-02-01

    The purpose of this plan is to describe the organization and methodology for the certification of hazardous waste (HW) handled in the Lawrence Berkeley Laboratory (LBL) Hazardous Waste Handling Facility (HWHF). The plan also incorporates the applicable elements of waste reduction, which include both up-front minimization and end- product treatment to reduce the volume and toxicity of the waste; segregation of the waste as it applies to certification; and executive summary of the Quality Assurance Program Plan (QAPP) for the HWHF and a list of the current and planned implementing procedures used in waste certification. The plan provides guidance from the HWHF to waste generators, waste handlers, and the Systems Group Manager to enable them to conduct their activities and carry out their responsibilities in a manner that complies with several requirements of the Federal Resource Conservation and Resource Recovery Act (RCRA), the Federal Department of Transportation (DOT), and the State of California, Code of Regulations (CCR), Title 22.

  19. Low-level waste certification plan for the WSCF Laboratory Complex

    SciTech Connect (OSTI)

    Morrison, J.A.

    1994-09-19

    The solid, low-level waste certification plan for the Waste Sampling and Characterization Facility (WSCF) describes the organization and methodology for the certification of the solid low-level waste (LLW) that is transferred to the Hanford Site 200 Areas Storage and Disposal Facilities. This plan incorporates the applicable elements of waste reduction, including up-front minimization, and end product treatment to reduce the volume or toxicity of the waste. The plan also includes segregation of different waste types. This low-level waste certification plan applies only to waste generated in, or is the responsibility of the WSCF Laboratory Complex. The WSCF Laboratory Complex supports technical activities performed at the Hanford Site. Wet Chemical and radiochemical analyses are performed to support site operations, including environmental and effluent monitoring, chemical processing, RCRA and CERCLA analysis, and waste management activities. Environmental and effluent samples include liquid effluents, ground and surface waters, soils, animals, vegetation, and air filters.

  20. Manual for the certification of laboratories analyzing drinking water. Criteria and procedures quality assurance (third edition)

    SciTech Connect (OSTI)

    Not Available

    1992-09-01

    Contents: introduction; responsibilities; implementation--(regional laboratories and programs; principal state laboratories; local laboratories; other considerations for certification; requirements for maintaining certification status; criteria and procedures for downgrading/revoking certification status; reciprocity; training; technical services; and alternate analytical techniques); chemistry--(personnel; laboratory facilities; laboratory equipment and instrumentation; general laboratory practices; analytical methodology; sample collection, handling, and preservation; quality assurance; records and data reporting; and action response to laboratory); microbiology--(personnel; laboratory facilities; laboratory equipment and instrumentation; general laboratory practices; analytical methodology; sample collection, handling, and preservation; quality assurance; records and data reporting; and action response to laboratory); radiochemistry--(personnel; laboratory facilities; laboratory equipment and instrumentation; general laboratory practices; analytical methodology; sample collection, handling, and preservation; quality assurance; records and data reporting; and action response to laboratory); appendices.

  1. Digitally programmable signal generator and method

    DOE Patents [OSTI]

    Priatko, G.J.; Kaskey, J.A.

    1989-11-14

    Disclosed is a digitally programmable waveform generator for generating completely arbitrary digital or analog waveforms from very low frequencies to frequencies in the gigasample per second range. A memory array with multiple parallel outputs is addressed; then the parallel output data is latched into buffer storage from which it is serially multiplexed out at a data rate many times faster than the access time of the memory array itself. While data is being multiplexed out serially, the memory array is accessed with the next required address and presents its data to the buffer storage before the serial multiplexing of the last group of data is completed, allowing this new data to then be latched into the buffer storage for smooth continuous serial data output. In a preferred implementation, a plurality of these serial data outputs are paralleled to form the input to a digital to analog converter, providing a programmable analog output. 6 figs.

  2. Digitally programmable signal generator and method

    DOE Patents [OSTI]

    Priatko, Gordon J.; Kaskey, Jeffrey A.

    1989-01-01

    A digitally programmable waveform generator for generating completely arbitrary digital or analog waveforms from very low frequencies to frequencies in the gigasample per second range. A memory array with multiple parallel outputs is addressed; then the parallel output data is latched into buffer storage from which it is serially multiplexed out at a data rate many times faster than the access time of the memory array itself. While data is being multiplexed out serially, the memory array is accessed with the next required address and presents its data to the buffer storage before the serial multiplexing of the last group of data is completed, allowing this new data to then be latched into the buffer storage for smooth continuous serial data output. In a preferred implementation, a plurality of these serial data outputs are paralleled to form the input to a digital to analog converter, providing a programmable analog output.

  3. Direct-to-digital holography and holovision

    DOE Patents [OSTI]

    Thomas, Clarence E.; Baylor, Larry R.; Hanson, Gregory R.; Rasmussen, David A.; Voelkl, Edgar; Castracane, James; Simkulet, Michelle; Clow, Lawrence

    2000-01-01

    Systems and methods for direct-to-digital holography are described. An apparatus includes a laser; a beamsplitter optically coupled to the laser; a reference beam mirror optically coupled to the beamsplitter; an object optically coupled to the beamsplitter, a focusing lens optically coupled to both the reference beam mirror and the object; and a digital recorder optically coupled to the focusing lens. A reference beam is incident upon the reference beam mirror at a non-normal angle, and the reference beam and an object beam are focused by the focusing lens at a focal plane of the digital recorder to form an image. The systems and methods provide advantages in that computer assisted holographic measurements can be made.

  4. Digital gate pulse generator for cycloconverter control

    DOE Patents [OSTI]

    Klein, Frederick F.; Mutone, Gioacchino A.

    1989-01-01

    The present invention provides a digital gate pulse generator which controls the output of a cycloconverter used for electrical power conversion applications by determining the timing and delivery of the firing pulses to the switching devices in the cycloconverter. Previous gate pulse generators have been built with largely analog or discrete digital circuitry which require many precision components and periodic adjustment. The gate pulse generator of the present invention utilizes digital techniques and a predetermined series of values to develop the necessary timing signals for firing the switching device. Each timing signal is compared with a reference signal to determine the exact firing time. The present invention is significantly more compact than previous gate pulse generators, responds quickly to changes in the output demand and requires only one precision component and no adjustments.

  5. Virtual mask digital electron beam lithography

    DOE Patents [OSTI]

    Baylor, L.R.; Thomas, C.E.; Voelkl, E.; Moore, J.A.; Simpson, M.L.; Paulus, M.J.

    1999-04-06

    Systems and methods for direct-to-digital holography are described. An apparatus includes a laser; a beamsplitter optically coupled to the laser; a reference beam mirror optically coupled to the beamsplitter; an object optically coupled to the beamsplitter, a focusing lens optically coupled to both the reference beam mirror and the object; and a digital recorder optically coupled to the focusing lens. A reference beam is incident upon the reference beam mirror at a non-normal angle, and the reference beam and an object beam are focused by the focusing lens at a focal plane of the digital recorder to form an image. The systems and methods provide advantages in that computer assisted holographic measurements can be made. 5 figs.

  6. Virtual mask digital electron beam lithography

    DOE Patents [OSTI]

    Baylor, Larry R.; Thomas, Clarence E.; Voelkl, Edgar; Moore, James A.; Simpson, Michael L.; Paulus, Michael J.

    1999-01-01

    Systems and methods for direct-to-digital holography are described. An apparatus includes a laser; a beamsplitter optically coupled to the laser; a reference beam mirror optically coupled to the beamsplitter; an object optically coupled to the beamsplitter, a focusing lens optically coupled to both the reference beam mirror and the object; and a digital recorder optically coupled to the focusing lens. A reference beam is incident upon the reference beam mirror at a non-normal angle, and the reference beam and an object beam are focused by the focusing lens at a focal plane of the digital recorder to form an image. The systems and methods provide advantages in that computer assisted holographic measurements can be made.

  7. ISSUANCE 2016-06-10: Energy Conservation Program: Certification, Compliance, Labeling, and Enforcement for Electric Motors and Small Electric Motors, Notice of Proposed Rulemaking

    Broader source: Energy.gov [DOE]

    Energy Conservation Program: Certification, Compliance, Labeling, and Enforcement for Electric Motors and Small Electric Motors, Notice of Proposed Rulemaking

  8. MedImmune Becomes First Biotech Facility to Earn SEP Certification |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Technical Assistance » Superior Energy Performance » MedImmune Becomes First Biotech Facility to Earn SEP Certification MedImmune Becomes First Biotech Facility to Earn SEP Certification November 5, 2014 - 10:33am Addthis AMO is pleased to announce that MedImmune's facility in Gaithersburg, Maryland, is now certified to the U.S. Department of Energy's (DOE's) Superior Energy Performance(tm) (SEP) program and to ISO 50001. The facility improved its energy performance by

  9. Acquisition Career Management Handbook Change – Revised Contracting Officer's Representative Certification (COR)

    Broader source: Energy.gov [DOE]

    A recent review of the January 2009 issue of the Department of Energy (DOE) Acquisition Career Management Program (ACMP) Handbook identified many areas that require an update. Although the ACMP Handbook revisions are underway, the Office of Management and Budget (OMB), Office of Federal Procurement Policy (OFPP) issued OFPP Memorandum, “Revisions to the Federal Acquisition Certification for Contracting Officer’s Representatives (FAC-COR),” dated September 6, 2011. This OFPP Memorandum requires that agencies implement the revised FAC-COR certifications effective January 1, 2012.

  10. Failure Rates from Certification Testing to UL and IEC Standards for Flat

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Plate PV Modules | Department of Energy Rates from Certification Testing to UL and IEC Standards for Flat Plate PV Modules Failure Rates from Certification Testing to UL and IEC Standards for Flat Plate PV Modules Presented at the PV Module Reliability Workshop, February 26 - 27 2013, Golden, Colorado pvmrw13_ps2_cfv_pratt.pdf (331.77 KB) More Documents & Publications Agenda for the PV Module Reliability Workshop, February 26 - 27 2013, Golden, Colorado Literature Review of the Effects

  11. T-676: Apple iOS Certificate Chain Validation Flaw Lets Certain Remote

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Users Access or Modify SSL/TLS Sessions | Department of Energy 76: Apple iOS Certificate Chain Validation Flaw Lets Certain Remote Users Access or Modify SSL/TLS Sessions T-676: Apple iOS Certificate Chain Validation Flaw Lets Certain Remote Users Access or Modify SSL/TLS Sessions July 26, 2011 - 1:06am Addthis PROBLEM: A vulnerability was reported in Apple iOS. A remote user with the ability to conduct a man-in-the-middle attack can access or modify SSL/TLS sessions. PLATFORM: iOS 4.2.5

  12. Altos Hornos de Mexico blast furnace No. 5 certification in ISO-9002 standard

    SciTech Connect (OSTI)

    Gamez, O.; Liceaga, F.; Arredondo, J.

    1997-12-31

    Altos Hornos de Mexico`s Blast Furnace No. 5, as a means to improve its product quality, sought and obtained the certification of its quality system based on the international standard ISO-9002. The certification was obtained under this quality standard in Dec. 1995 and has successfully been maintained after two continuance audits. For blast furnace No. 5 (BF5) the benefits are reflected by a reduction in the hot metal silicon content variability, a decrease in fuel consumption and a higher productivity. Benefits were also obtained in the working environment where the personnel became more highly motivated, procedures were carried out to completion and the quality records were filled correctly.

  13. Latest Certification Gives Volvo Top Three Plants at Platinum Level of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Superior Energy Performance® | Department of Energy Latest Certification Gives Volvo Top Three Plants at Platinum Level of Superior Energy Performance® Latest Certification Gives Volvo Top Three Plants at Platinum Level of Superior Energy Performance® December 17, 2014 - 3:10pm Addthis <em>Photo courtesy of Volvo Group Trucks</em> Photo courtesy of Volvo Group Trucks AMO is pleased to announce that the Volvo Group Trucks facility in Hagerstown, Maryland, has become the third

  14. Digitally programmable signal generator and method

    SciTech Connect (OSTI)

    Priatko, G.J.; Kaskey, J.A.

    1986-09-02

    A digitally programmable signal generator (DPSG) and method are disclosed. The DPSG can be used in applications such as Atomic Vapor Laser Isotope Separation (AVLIS) to create an optimal match between the process laser's spectral profile and that of the vaporized material. Other applications include optical telecommunications, non-optical telecommunication in the microwave and radio spectrum, radar, electronic countermeasures, high speed computer interconnects, local area networks, high definition video transport and the multiplexing of large quantities of slow digital memory into high speed data streams. This invention extends the operation of DPSGs into the GHz range, while preserving all of the current art's DPSGs' operational features.

  15. Sandia National Laboratories: Sandia Digital Media

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sandia Digital Media Now Playing Featured Categories At Sandia Community Service Energy Engineering - Nuclear Health-Safety Historical Material National Security Sciences and Engineering Technical Training Search Videos Webinars There are no current webinars at this time. For Media Browse Sandia's Media B-Roll. For additional information, view Sandia's Media Contacts and Resources page.

  16. Consortium on Digital Energy CoDE | Open Energy Information

    Open Energy Info (EERE)

    on Digital Energy CoDE Jump to: navigation, search Name: Consortium on Digital Energy (CoDE) Place: London, England, United Kingdom Zip: EC2A 1QP Product: London-based consortium...

  17. The Sloan Digital Sky Survey Quasar Lens Search. IV. Statistical...

    Office of Scientific and Technical Information (OSTI)

    The Sloan Digital Sky Survey Quasar Lens Search. IV. Statistical Lens Sample from the Fifth Data Release Citation Details In-Document Search Title: The Sloan Digital Sky Survey...

  18. Development of GEM-Based Digital Hadron Calorimetry Using the...

    Office of Scientific and Technical Information (OSTI)

    Conference: Development of GEM-Based Digital Hadron Calorimetry Using the SLAC KPiX Chip Citation Details In-Document Search Title: Development of GEM-Based Digital Hadron...

  19. System 80+{trademark} Standard Design: CESSAR design certification. Volume 2: Amendment I

    SciTech Connect (OSTI)

    Not Available

    1990-12-21

    This report, entitled Combustion Engineering Standard Safety Analysis Report - Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These documents describe the Combustion Engineering, Inc. System 80+{sup TM} Standard Design. This report, Volume 2, in conjunction with Volume 3, provides the design of structures, components, equipment and systems.

  20. Protocol for DOE-VPP Star Site Re-certification Reviews

    Broader source: Energy.gov [DOE]

    This document provides the overall policy and the procedural protocols that will be utilized by the Office of Environment, Safety and Health in conducting re-certification reviews of facilities participating in the Department of Energy Voluntary Protection Program (DOE-VPP) at the Star recognition level.

  1. A West Valley Demonstration Project Milestone - Achieving Certification to Ship Waste to the Nevada Test Site

    SciTech Connect (OSTI)

    Jackson, J. P.; Pastor, R. S.

    2002-02-28

    The West Valley Demonstration Project (WVDP) has successfully pretreated and vitrified nearly all of the 600,000 gallons of liquid high-level radioactive waste that was generated at the site of the only commercial nuclear fuel reprocessing plant to have operated in the United States. Low-level waste (LLW) generated during the course of the cleanup effort now requires disposal. Currently the WVDP only ships Class A LLW for off-site disposal. It has been shipping Class A wastes to Envirocare of Utah, Inc. since 1997. However, the WVDP may also have a future need to ship Class B and Class C waste, which Envirocare is not currently authorized to accept. The Nevada Test Site (NTS), a U.S. Department of Energy (DOE) facility, can accept all three waste classifications. The WVDP set a goal to receive certification to begin shipping Class A wastes to NTS by 2001. Formal certification/approval was granted by the DOE Nevada Operations Office on July 12, 2001. This paper discusses how the WVDP contractor, West Valley Nuclear Services Company (WVNSCO), completed the activities required to achieve NTS certification in 2001 to ship waste to its facility. The information and lessons learned provided are significant because the WVDP is the only new generator receiving certification based on an NTS audit in January 2001 that resulted in no findings and only two observations--a rating that is unparalleled in the DOE Complex.

  2. System 80+{trademark} Standard Design: CESSAR design certification. Volume 10: Amendment I

    SciTech Connect (OSTI)

    Not Available

    1990-12-21

    This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80{sup +}{trademark} Standard Design. This volume 10 discusses the Steam and Power Conversion System and Radioactive Waste Management.

  3. A guide to the emissions certification procedures for alternative fuel aftermarket conversions

    SciTech Connect (OSTI)

    1998-01-01

    Emissions certification is still relatively new to the aftermarket vehicle conversion industry. Many in the industry think that as soon as a vehicle is converted to operate on compressed natural gas (CNG) or liquefied petroleum gas (LFG), it automatically runs as clean as or cleaner than it did on the conventional fuel. However, recent studies have shown that aftermarket conversions may not always reduce emissions. To achieve emissions benefits, the conversion equipment must be designed and calibrated specifically for the engine and emissions control system on which it has been installed, and the installation and setup must be performed so as to not adversely affect the vehicle`s original emissions performance. The reason for certification, then, is to ensure that these criteria are met, that the vehicle continues to perform properly, and that it continues to satisfy all appropriate emissions standards throughout its useful life. The authors have prepared this guide to help equipment manufacturers, distributors, and installers understand the emissions certification process for aftermarket conversions. The guide gives an overview of the certification requirements established by the US EPA and by the state of California.

  4. Training and Certification Program for Certified Energy Auditors (CEA) and Certified Building Commissioning Professionals (CBCP)

    SciTech Connect (OSTI)

    Kent, Bill

    2012-08-24

    The Association of Energy Engineers (AEE) has offered energy efficiency training and certification programs for over 30 years. During that time AEE has certified more than 22,000 professionals. All of our certification programs are the result of extensive industry research and program development and oversight by certification boards. For this project award, AEE proposed to work with the Department of Energy to utilize and extend existing industry recognized Certified Energy Auditor (CEA) and Certified Building Commissioning Professional (CBCP) programs under this Training Program Development Announcement. These expanded training programs will have significant impact in training professionals for building commissioning and energy auditing to achieve the goal of bringing existing buildings up to their optimal energy performance potential and ensuring that new buildings maintain their expected optimal level of performance. The goals and objectives of the training development project were achieved with the development of new training programs that are now being offered as self-sustaining commercial training and certification programs. These new programs are training and certifying professionals who are accomplishing the goal of increasing building energy performance in both existing and new buildings.

  5. Personnel Selection, Training, Qualification, and Certification Requirements for DOE Nuclear Facilities

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2010-04-21

    The order establishes selection, training, qualification, and certification requirements for contractor personnel who can impact the safety basis through their involvement in the operation, maintenance, and technical support of Hazard Category 1, 2, and 3 nuclear facilities. Admin Chg 1, dated 7-29-13, supersedes DOE O 426.2.

  6. Certification report for final closure of Y-12 Centralized Sanitary Landfill II, Oak Ridge, Tennessee

    SciTech Connect (OSTI)

    1995-12-31

    This report represents the Geotek Engineering Company, Inc., (Geotek) record of activities to support certification of final closure Of the subject Y-12 Centralized Sanitary Landfill II. Ex as noted herein, final closure of the landfill was completed in accordance with the Y-12 Centralized Sanitary Landfill 11 Closure/Post Closure Plan, Revision 2, submitted by the US Department of Energy (DOE) to the Tennessee Department of Environment and Conservation (TDEC) on April 14, 1992, and approved by TDEC on May 27, 1994 (the ``Closure Plan``). minor modification to the Closure Plan allowing partial closure of the Y-12 Centralized Sanitary Landfill II (Phase 1) was approved by TDEC on August 3, 1994. The Phase I portion of the closure for the subject landfill was completed on March 25, 1995. A closure certification report entitled Certification Report for Partial Closure of Y-12 Centralized Sanitary Landfill II was submitted to Lockheed Martin Energy Systems, Inc., (LMES) on March 28, 1995. The final closure represents the completion of the closure activities for the entire Y-12 Centralized Sanitary Landfill II Site. The contents of this report and accompanying certification are based on observations by Geotek engineers and geologists during closure activities and on review of reports, records, laboratory test results, and other information furnished to Geotek by LMES.

  7. System 80+{trademark} Standard Design: CESSAR design certification. Volume 6: Amendment I

    SciTech Connect (OSTI)

    Not Available

    1990-12-21

    This report, entitled Combustion Engineering Standard Safety Analysis Report - Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These documents describe the Combustion Engineering, Inc. System 80+{sup TM} Standard Design. This report, Volume 6, in conjunction with Volume 7, provides a description of engineered safety features.

  8. System 80+{trademark} Standard Design: CESSAR design certification. Volume 8: Amendment I

    SciTech Connect (OSTI)

    Not Available

    1990-12-21

    This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80{sup +}{trademark} Standard Design. This volume 8 provides a description of instrumentation and controls.

  9. Personnel Selection, Training, Qualification, and Certification Requirements for DOE Nuclear Facilities

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2010-04-21

    The order establishes selection, training, qualification, and certification requirements for contractor personnel who can impact the safety basis through their involvement in the operation, maintenance, and technical support of Hazard Category 1, 2, and 3 nuclear facilities. Cancels DOE O 5480.20A. Admin Chg 1, dated 7-29-13.

  10. System 80+{trademark} Standard Design: CESSAR design certification. Volume 9: Amendment I

    SciTech Connect (OSTI)

    Not Available

    1990-12-21

    This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80{sup +}{trademark} Standard Design. This volume 9 discusses Electric Power and Auxiliary Systems.

  11. Biofuels and certification. A workshop at the Harvard Kennedy School of Government. Summary report

    SciTech Connect (OSTI)

    Devereaux, Charan; Lee, Henry

    2009-06-01

    Liquid biofuels can provide a substitute for fossil fuels in the transportation sector. Many countries have mandated the use of biofuels, by creating targets for their use. If not implemented with care, however, actions that increase biofuel production can put upward pressure on food prices, increase greenhouse gas (GHG) emissions, and exacerbate degradation of land, forest, and water sources. A strong global biofuels industry will not emerge unless these environmental and social concerns are addressed. Interested parties around the world are actively debating the design and implementation of policies to meet the biofuel goals, particularly those established in the United States and Europe. In general, policy options for managing the potential risks and benefits of biofuel development should specify not only clear standards governing biofuel content and production processes, but also certification processes for verifying whether particular biofuels meet those standards, and specific metrics or indicators on which to base the certification. Historically, many standards in the energy and environment fields have ultimately been set or supported by governments. Many of the certification processes have been voluntary, carried out by independent third parties. The biofuels case is a young one, however, with questions of goals, standards, certification, and metrics still in interdependent flux. The workshop focused its discussions on certification issues, but found the discussions naturally reaching into ongoing debates regarding possible goals, standards, and metrics. Many countries are proposing that for a biofuel to qualify as contributing to government-mandated targets or goals, it must be certified to meet certain standards. These standards could be limited to the amount of GHG emitted in the production process or could include a number of other environmental sustainability concerns ranging from deforestation and biodiversity to water resources. While the threat to

  12. Establishment of a Graduate Certificate Program in Biobased Industrial Products Final Technical Report

    SciTech Connect (OSTI)

    John R. Schlup

    2005-11-04

    A certificate of graduate studies in Biobased Industrial Products is to be established at Kansas State University (KSU) along with the development of a similar program at Pittsburg State University, Pittsburg, KS. At KSU, the program of study will be coordinated through the steering committee of the Agricultural Products Utilization Forum (APUF); the certificate of graduate studies will be awarded through the Graduate School of Kansas State University. This certificate will establish an interdisciplinary program of study that will: (1) ensure participating students receive a broad education in several disciplines related to Biobased Industrial Products, (2) provide a documented course of study for students preferring a freestanding certificate program, and (3) provide a paradigm shift in student awareness away from petroleum-based feedstocks to the utilization of renewable resources for fuels and chemical feedstocks. The academic program described herein will accomplish this goal by: (1) providing exposure to several academic disciplines key to Biobased Industrial Products; (2) improving university/industry collaboration through an external advisory board, distance learning opportunities, and student internships; (3) expanding the disciplines represented on the students' supervisory committee; (4) establishing a seminar series on Biobased Industrial Products that draws upon expert speakers representing several disciplines; and (5) increasing collaboration between disciplines. Numerous research programs emphasizing Biobased Industrial Products currently exist at KSU and PSU. The certificate of graduate studies, the emphasis on interdisciplinary collaboration within the students? thesis research, the proposed seminar series, and formation of an industrial advisory board will: (1) provide an interdisciplinary academic experience that spans several departments, four colleges, four research centers, and two universities; (2) tangibly promote collaboration between KSU

  13. Recording multiple spatially-heterodyned direct to digital holograms in one digital image

    DOE Patents [OSTI]

    Hanson, Gregory R.; Bingham, Philip R.

    2008-03-25

    Systems and methods are described for recording multiple spatially-heterodyned direct to digital holograms in one digital image. A method includes digitally recording, at a first reference beam-object beam angle, a first spatially-heterodyned hologram including spatial heterodyne fringes for Fourier analysis; Fourier analyzing the recorded first spatially-heterodyned hologram by shifting a first original origin of the recorded first spatially-heterodyned hologram to sit on top of a first spatial-heterodyne carrier frequency defined by the first reference beam-object beam angle; digitally recording, at a second reference beam-object beam angle, a second spatially-heterodyned hologram including spatial heterodyne fringes for Fourier analysis; Fourier analyzing the recorded second spatially-heterodyned hologram by shifting a second original origin of the recorded second spatially-heterodyned hologram to sit on top of a second spatial-heterodyne carrier frequency defined by the second reference beam-object beam angle; applying a first digital filter to cut off signals around the first original origin and define a first result; performing a first inverse Fourier transform on the first result; applying a second digital filter to cut off signals around the second original origin and define a second result; and performing a second inverse Fourier transform on the second result, wherein the first reference beam-object beam angle is not equal to the second reference beam-object beam angle and a single digital image includes both the first spatially-heterodyned hologram and the second spatially-heterodyned hologram.

  14. Fundamental Concepts of Digital Image Processing

    DOE R&D Accomplishments [OSTI]

    Twogood, R. E.

    1983-03-01

    The field of a digital-image processing has experienced dramatic growth and increasingly widespread applicability in recent years. Fortunately, advances in computer technology have kept pace with the rapid growth in volume of image data in these and other applications. Digital image processing has become economical in many fields of research and in industrial and military applications. While each application has requirements unique from the others, all are concerned with faster, cheaper, more accurate, and more extensive computation. The trend is toward real-time and interactive operations, where the user of the system obtains preliminary results within a short enough time that the next decision can be made by the human processor without loss of concentration on the task at hand. An example of this is the obtaining of two-dimensional (2-D) computer-aided tomography (CAT) images. A medical decision might be made while the patient is still under observation rather than days later.

  15. The Focusing DIRC with Waveform Digitizing Electronics

    SciTech Connect (OSTI)

    Ruckman, L.L.; Nishimura, K.; Varner, G.S.; Vavra, J.; Aston, D.; Leith, D.W.G.S.; Ratcliff, B.; /SLAC

    2012-06-15

    We have tested a novel Cherenkov imaging detector called the Focusing DIRC (FDIRC) with waveform digitizing electronics. The prototype's concept is based on the BaBar DIRC with several important improvements: (a) much faster, pixelated photon detectors, (b) a mirror that makes the photon detector smaller and less sensitive to background in future applications, and (c) electronics capable of measuring single photon resolution to {sigma} {approx} 150 ps, which allows for correction due to chromatic error. In this test, the prototype has been instrumented with seven Hamamatsu H-8500 MaPMTs. Waveforms from {approx}450 pixels are digitized with waveform sampling electronics based on the BLAB2 ASIC, operating at a sampling speed of {approx}2.5 GSa/s. This version of the FDIRC prototype was tested in a large cosmic ray telescope providing muon tracks with {approx}1 mrad angular resolution and a muon momentum cutoff of {ge} 1.6 GeV/c.

  16. Digital computer operation of a nuclear reactor

    DOE Patents [OSTI]

    Colley, R.W.

    1982-06-29

    A method is described for the safe operation of a complex system such as a nuclear reactor using a digital computer. The computer is supplied with a data base containing a list of the safe state of the reactor and a list of operating instructions for achieving a safe state when the actual state of the reactor does not correspond to a listed safe state, the computer selects operating instructions to return the reactor to a safe state.

  17. Digital computer operation of a nuclear reactor

    DOE Patents [OSTI]

    Colley, Robert W.

    1984-01-01

    A method is described for the safe operation of a complex system such as a nuclear reactor using a digital computer. The computer is supplied with a data base containing a list of the safe state of the reactor and a list of operating instructions for achieving a safe state when the actual state of the reactor does not correspond to a listed safe state, the computer selects operating instructions to return the reactor to a safe state.

  18. The Digital Road to Scientific Knowledge Diffusion

    Office of Scientific and Technical Information (OSTI)

    Digital Road to Scientific Knowledge Diffusion A Faster, Better Way to Scientific Progress? By David E. Wojick, Walter L. Warnick, Bonnie C. Carroll, and June Crowe Introduction With the United States federal government spending over $130 billion annually for research and development, ways to increase the productivity of that research can have a significant return on investment. It is well known that all scientific advancement is based on work that has come before. Isaac Newton expressed this

  19. Portable Digital Radiography and Computed Tomography Manual

    SciTech Connect (OSTI)

    Not Available

    2007-11-01

    This user manual describes the function and use of the portable digital radiography and computed tomography (DRCT) scanner. The manual gives a general overview of x-ray imaging systems along with a description of the DRCT system. An inventory of the all the system components, organized by shipping container, is also included. In addition, detailed, step-by-step procedures are provided for all of the exercises necessary for a novice user to successfully collect digital radiographs and tomographic images of an object, including instructions on system assembly and detector calibration and system alignment. There is also a short section covering the limited system care and maintenance needs. Descriptions of the included software packages, the DRCT Digital Imager used for system operation, and the DRCT Image Processing Interface used for image viewing and tomographic data reconstruction are given in the appendixes. The appendixes also include a cheat sheet for more experienced users, a listing of known system problems and how to mitigate them, and an inventory check-off sheet suitable for copying and including with the machine for shipment purposes.

  20. DIGITAL TECHNOLOGY BUSINESS CASE METHODOLOGY GUIDE & WORKBOOK

    SciTech Connect (OSTI)

    Thomas, Ken; Lawrie, Sean; Hart, Adam; Vlahoplus, Chris

    2014-09-01

    Performance advantages of the new digital technologies are widely acknowledged, but it has proven difficult for utilities to derive business cases for justifying investment in these new capabilities. Lack of a business case is often cited by utilities as a barrier to pursuing wide-scale application of digital technologies to nuclear plant work activities. The decision to move forward with funding usually hinges on demonstrating actual cost reductions that can be credited to budgets and thereby truly reduce O&M or capital costs. Technology enhancements, while enhancing work methods and making work more efficient, often fail to eliminate workload such that it changes overall staffing and material cost requirements. It is critical to demonstrate cost reductions or impacts on non-cost performance objectives in order for the business case to justify investment by nuclear operators. This Business Case Methodology approaches building a business case for a particular technology or suite of technologies by detailing how they impact an operator in one or more of the three following areas: Labor Costs, Non-Labor Costs, and Key Performance Indicators (KPIs). Key to those impacts will be identifying where the savings are harvestable, meaning they result in an actual reduction in headcount and/or cost. The report consists of a Digital Technology Business Case Methodology Guide and an accompanying spreadsheet workbook that will enable the user to develop a business case.

  1. Image display device in digital TV

    DOE Patents [OSTI]

    Choi, Seung Jong

    2006-07-18

    Disclosed is an image display device in a digital TV that is capable of carrying out the conversion into various kinds of resolution by using single bit map data in the digital TV. The image display device includes: a data processing part for executing bit map conversion, compression, restoration and format-conversion for text data; a memory for storing the bit map data obtained according to the bit map conversion and compression in the data processing part and image data inputted from an arbitrary receiving part, the receiving part receiving one of digital image data and analog image data; an image outputting part for reading the image data from the memory; and a display processing part for mixing the image data read from the image outputting part and the bit map data converted in format from the a data processing part. Therefore, the image display device according to the present invention can convert text data in such a manner as to correspond with various resolution, carry out the compression for bit map data, thereby reducing the memory space, and support text data of an HTML format, thereby providing the image with the text data of various shapes.

  2. Digital I and C system upgrade integration technique

    SciTech Connect (OSTI)

    Huang, H. W.; Shih, C.; Wang, J. R.; Huang, K. C.

    2012-07-01

    This work developed an integration technique for digital I and C system upgrade, the utility can replace the I and C systems step by step systematically by this method. Inst. of Nuclear Energy Research (INER) developed a digital Instrumentation and Control (I and C) replacement integration technique on the basis of requirement of the three existing nuclear power plants (NPPs), which are Chin-Shan (CS) NPP, Kuo-Sheng (KS) NPP, and Maanshan (MS) NPP, in Taiwan, and also developed the related Critical Digital Review (CDR) Procedure. The digital I and C replacement integration technique includes: (I) Establishment of Nuclear Power Plant Digital Replacement Integration Guideline, (2) Preliminary Investigation on I and C System Digitalization, (3) Evaluation on I and C System Digitalization, and (4) Establishment of I and C System Digitalization Architectures. These works can be a reference for performing I and C system digital replacement integration of the three existing NPPs of Taiwan Power Company (TPC). A CDR is the review for a critical system digital I and C replacement. The major reference of this procedure is EPRI TR- 1011710 (2005) 'Handbook for Evaluating Critical Digital Equipment and Systems' which was published by the Electric Power Research Inst. (EPRI). With this document, INER developed a TPC-specific CDR procedure. Currently, CDR becomes one of the policies for digital I and C replacement in TPC. The contents of this CDR procedure include: Scope, Responsibility, Operation Procedure, Operation Flow Chart, CDR review items. The CDR review items include the comparison of the design change, Software Verification and Validation (SVandV), Failure Mode and Effects Analysis (FMEA), Evaluation of Diversity and Defense-in-depth (D3), Evaluation of Watchdog Timer, Evaluation of Electromagnetic Compatibility (EMC), Evaluation of Grounding for System/Component, Seismic Evaluation, Witness and Inspection, Lessons Learnt from the Digital I and C Failure Events. A

  3. DOE Publishes Petition of CSA Group for Classification as a Nationally Recognized Certification Program for Small Electric Motors

    Broader source: Energy.gov [DOE]

    The Department of Energy has published a Federal Register notice of petition and request for public comments regarding CSA Group for classification as a nationally recognized certification program for small electric motors.

  4. Green Building Certification Systems Requirement for New Federal Buildings and Major Renovations of Federal Buildings OIRA Comparison Document

    Broader source: Energy.gov [DOE]

    Document details the Green Building Certification Systems Requirement for New Federal Buildings and Major Renovations of Federal Buildings' OIRA Comparison Document for 10 CFR Parts 433, 435 and 436.

  5. Appliance Standards Update and Review of Certification, Compliance and Enforcement Powerpoint Presentation for ASHRAE Conference, January 31, 2011

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Buildings Regulatory Program Buildings Regulatory Program Appliance Standards Update and Review of Certification, Compliance and Enforcement John Cymbalsky, Ashley Armstrong, and Laura Barhydt US Department of Energy January 31, 2011 Presentation Outline Presentation Outline * Upcoming Relevant Rulemakings * Changes to Rulemaking Process * Executive Order 13563 * Overview of Compliance, Certification, and Enforcement * Detailed Questions and Answers 2 | U.S. Department of Energy energy.gov Long

  6. B Plant complex hazardous, mixed and low level waste certification plan

    SciTech Connect (OSTI)

    Beam, T.G.

    1994-11-01

    This plan describes the administrative steps and handling methodology for certification of hazardous waste, mixed waste, and low level waste generated at B Plant Complex. The plan also provides the applicable elements of waste reduction and pollution prevention, including up front minimization and end product reduction of volume and/or toxicity. The plan is written to satisfy requirements for Hanford Site waste generators to have a waste certification program in place at their facility. This plan, as described, applies only to waste which is generated at, or is the responsibility of, B Plant Complex. The scope of this plan is derived from the requirements found in WHC-EP-0063, Hanford Site Solid Waste Acceptance Criteria.

  7. Certification of U.S. instrumentation in Russian nuclear processing facilities

    SciTech Connect (OSTI)

    D.H. Powell; J.N. Sumner

    2000-07-12

    Agreements between the United States (U.S.) and the Russian Federation (R.F.) require the down-blending of highly enriched uranium (HEU) from dismantled Russian Federation nuclear weapons. The Blend Down Monitoring System (BDMS) was jointly developed by the Los Alamos National Laboratory (LANL) and the Oak Ridge National Laboratory (ORNL) to continuously monitor the enrichments and flow rates in the HEU blending operations at the R.F. facilities. A significant requirement of the implementation of the BDMS equipment in R.F. facilities concerned the certification of the BDMS equipment for use in a Russian nuclear facility. This paper discusses the certification of the BDMS for installation in R.F. facilities, and summarizes the lessons learned from the process that can be applied to the installation of other U.S. equipment in Russian nuclear facilities.

  8. Nuclear Power 2010 Program: Combined Construction and Operating License & Design Certification Demonstration Projects Lessons Learned Report

    Broader source: Energy.gov [DOE]

    The Nuclear Power 2010 (NP 2010) Construction and Operating License/Design Certification (COL/DC) Demonstration program together with the financial incentives provided by the Energy Policy Act of 2005 are the two primary reasons why a number of license applications for new nuclear construction are before the NRC today, and why the first new nuclear plants in over 30 years are under construction in the United States.

  9. Microsoft Word - Transmittal of the Certification Audit Report for the Hanford TRU Program.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    389:UFC 2300.00 Department of Energy Carlsbad Field Office P. O. Box 3090 Carlsbad, New Mexico 88221 October 15, 2008 Mr. Steve Zappe, Project Leader Hazardous Waste Bureau New Mexico Environment Department 2905 Rodeo Park Drive East, Building 1 Santa Fe, New Mexico 87505-6303 Subject: Transmittal of the Certification Audit Report for the Hanford TRU Program Dear Mr. Zappe: Enclosed is the Hanford TRU Program Audit Report for the processes performed to characterize and certify waste as required

  10. Regional Test Centers Project Expands U.S. Small Wind Certification Testing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Capability - News Releases | NREL Regional Test Centers Project Expands U.S. Small Wind Certification Testing Capability Organizations in Kansas, New York, Texas, and Utah to receive support to conduct small wind turbine tests March 5, 2010 On Feb. 9, 2010, The U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) and DOE's Wind and Hydropower Technologies Program announced the selection of four partners to establish small wind Regional Test Centers (RTCs) to conduct

  11. SU-B-213-05: Development of ABR Certification Standards

    SciTech Connect (OSTI)

    Seibert, J.

    2015-06-15

    The North American medical physics community validates the education received by medical physicists and the clinical qualifications for medical physicists through accreditation of educational programs and certification of medical physicists. Medical physics educational programs (graduate education and residency education) are accredited by the Commission on Accreditation of Medical Physics Education Programs (CAMPEP), whereas medical physicists are certified by several organizations, the most familiar of which is the American Board of Radiology (ABR). In order for an educational program to become accredited or a medical physicist to become certified, the applicant must meet certain specified standards set by the appropriate organization. In this Symposium, representatives from both CAMPEP and the ABR will describe the process by which standards are established as well as the process by which qualifications of candidates for accreditation or certification are shown to be compliant with these standards. The Symposium will conclude with a panel discussion. Learning Objectives: Recognize the difference between accreditation of an educational program and certification of an individual Identify the two organizations primarily responsible for these tasks Describe the development of educational standards Describe the process by which examination questions are developed GS is Executive Secretary of CAMPEP.

  12. EBR-II and TREAT Digitization Project

    SciTech Connect (OSTI)

    Griffith, George W.; Rabiti, Cristian

    2015-09-01

    Digitizing the technical drawings for EBR-II and TREAT provides multiple benefits. Moving the scanned or hard copy drawings to modern 3-D CAD (Computer Aided Drawing) format saves data that could be lost over time. The 3-D drawings produce models that can interface with other drawings to make complex assemblies. The 3-D CAD format can also include detailed material properties and parametric coding that can tie critical dimensions together allowing easier modification. Creating the new files from the old drawings has found multiple inconsistencies that are being flagged or corrected improving understanding of the reactor(s).

  13. Jefferson Lab Groups Encourage Digital Literacy Through Worldwide 'Hour

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Code' Campaign | Jefferson Lab Groups Encourage Digital Literacy Through Worldwide 'Hour of Code' Campaign Dana Cochran, Jefferson Lab staff member, helps students as they participate in a coding activity. Dana Cochran, Jefferson Lab staff member, helps students as they participate in a coding activity. Jefferson Lab Groups Encourage Digital Literacy Through Worldwide 'Hour of Code' Campaign To raise awareness of the need for digital literacy and a basic understanding of computer science,

  14. Human Reliability Analysis for Digital Human-Machine Interfaces

    SciTech Connect (OSTI)

    Ronald L. Boring

    2014-06-01

    This paper addresses the fact that existing human reliability analysis (HRA) methods do not provide guidance on digital human-machine interfaces (HMIs). Digital HMIs are becoming ubiquitous in nuclear power operations, whether through control room modernization or new-build control rooms. Legacy analog technologies like instrumentation and control (I&C) systems are costly to support, and vendors no longer develop or support analog technology, which is considered technologically obsolete. Yet, despite the inevitability of digital HMI, no current HRA method provides guidance on how to treat human reliability considerations for digital technologies.

  15. Physical + Digital: The New Power Couple |GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    product's individual parts and each part's unique lifecycles with digital tools like data lakes, model infrastructure, visualization, estimation, controls, and specialized...

  16. Sandia Energy - Digital In-Line Holography Helps Researchers...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    droplets of fuel are generated and behave in such cases. Sandia researchers developed 3-D measurement techniques based on digital in-line holography (DIH). Sandia advanced DIH...

  17. Impact of Utility Rates on PV Economics - Digital Appendix |...

    Open Energy Info (EERE)

    for The Impacts of Utility Rates and Building Type on the Economics of Commercial Photovoltaic Systems. This digital appendix contains supplement material for the NREL technical...

  18. EERE Digital Data Management Frequently Asked Questions | Department...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Frequently Asked Questions EERE Digital Data Management Frequently Asked Questions Submitting a Data Management Plan 1. I am submitting an applicationproposal for research funding ...

  19. DOE Policy for Digital Research Data Management: Suggested Elements...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Suggested Elements for a Data Management Plan DOE Policy for Digital Research Data Management: Suggested Elements for a Data Management Plan The Principal Investigator or other ...

  20. EERE Digital Data Management Glossary | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Digital data management glossary terms are defined below. Data preservation: Data preservation means providing for the usability of data beyond the lifetime of the research ...

  1. Jefferson Lab Groups Encourage Digital Literacy Through Worldwide...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    To raise awareness of the need for digital literacy and a basic understanding of computer science, Jefferson Lab's Information Technology Division and Science Education staff are ...

  2. Federal Register Vol. 76 No. 44, 12422-12505- Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and Commercial and Industrial Equipment (March 7, 2011)

    Office of Energy Efficiency and Renewable Energy (EERE)

    Federal Register Vol. 76 No. 44, 12422-12505 - Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and Commercial and Industrial Equipment (March 7, 2011)....

  3. World Record Earned Value Management System Certification for Cleanup of the East Tennessee Technology Park, Oak Ridge, Tennessee, USA - 13181

    SciTech Connect (OSTI)

    Haynes, Ray; Hirschy, Anita

    2013-07-01

    On projects that require Earned Value Management (EVMS) Certification, it is critical to quickly prepare for and then successfully obtain certification. This is especially true for government contracts. Projects that do poorly during the review are subject to financial penalties to their company and they lose creditability with their customer creating problems with the project at the outset. At East Tennessee Technology Park (ETTP), we began preparing for Department of Energy (DOE) certification early during proposal development. Once the contract was awarded, while still in transition phase from the previous contractor to our new company, we immediately began reviewing the project controls systems that were in place on the project and determined if any replacements needed to be made immediately. The ETTP contract required the scheduling software to be upgraded to Primavera P6 and we determined that no other software changes would be done prior to certification. Next, preparation of the Project Controls System Description (PCSD) and associated procedures began using corporate standards as related to the project controls systems. During the transition phase, development was started on the Performance Measurement Baseline which is the resource loaded schedule used to measure our performance on the project and which is critical to good Earned Value Management of the project. Early on, and throughout the baseline review, there was positive feedback from the Department of Energy that the quality of the new baseline was good. Having this superior baseline also contributed to our success in EVMS certification. The combined companies of URS and CH2M Hill had recent experience with certifications at other Department of Energy sites and we were able to capitalize on that knowledge and experience. Generic PCSD and procedures consistent with our co-operations approach to Earned Value Management were available to us and were easily tailorable to the specifics of our contract

  4. Digital X-ray Pipe Inspector Software

    Energy Science and Technology Software Center (OSTI)

    2009-10-29

    The Digital X-ray Pipe Inspector software requires a digital x-ray image of a pipe as input to the program, such as the image in Attachment A Figure 1. The image may be in a variety of software formats such as bitmap, jpeg, tiff, DICOM or DICONDE. The software allows the user to interactively select a region of interest from the image for analysis. This software is used to analyze digital x-ray images of pipes tomore » evaluate loss of wall thickness. The software specifically provides tools to analyze the image in (a) the pipe walls, (b) between the pipe walls. Traditional software uses only the information at the pipe wall while this new software also evaluates the image between the pipewalls. This makes the inspection process faster, more thorough, more efficient, and reduces expensive reshots. Attachment A Figure 2 shows a region of interest (a green box) drawn by the user around an anomaly in the pipe wall. This area is automatically analyzed by the external pipe wall tool with the result shown in Attachment A Figure 3. The edges of the pipe wall are detected and highlighted in yellow and areas where the wall thickness in less the the minimum wall threshold are shown in red. These measurements are typically made manually in other software programs, which lead to errors and inconsistency because the location of the edges are estimated by the user. Attachment A Figure 4 shows a region of interest (a green box) drawn by the user between the pipe walls. As can be seen there are intensity anomalies that correspond to wall defects. However, this information is not used directly by other software programs. In order to fully investigate these anomalies, the pipe would be reinspected in a different orientation to attempt to obtain a view of the anomaly in the pipe wall rather than the interior of the pipe. The pipe may need to be x-rayed a number of times to obtain the correct orientation. This is very costly and time consuming. The new software can perform the

  5. Digital radiography exposure indices: A review

    SciTech Connect (OSTI)

    Mothiram, Ursula; Brennan, Patrick C; Lewis, Sarah J; Moran, Bernadette; Robinson, John

    2014-06-15

    Digital radiography (DR) technologies have the advantage of a wide dynamic range compared to their film-screen predecessors, however, this poses a potential for increased patient exposure if left unchecked. Manufacturers have developed the exposure index (EI) to counter this, which provides radiographers with feedback on the exposure reaching the detector. As these EIs were manufacturer-specific, a wide variety of EIs existed. To offset this, the international standardised EI has been developed by the International Electrotechnical Commission (IEC) and the American Association of Physicists in Medicine (AAPM). The purpose of this article is to explore the current literature relating to EIs, beginning with the historical development of the EI, the development of the standardised EI and an exploration of common themes and studies as evidenced in the research literature. It is anticipated that this review will provide radiographers with a useful guide to understanding EIs, their application in clinical practice, limitations and suggestions for further research.

  6. Digital reverse propagation in focusing Kerr media

    SciTech Connect (OSTI)

    Goy, Alexandre; Psaltis, Demetri

    2011-03-15

    Lenses allow the formation of clear images in homogeneous linear media. Holography is an alternative imaging method, but its use is limited to cases in which it provides an advantage, such as three-dimensional imaging. In nonlinear media, lenses no longer work. The light produces intensity-dependent aberrations. The reverse propagation method used in digital holography to form images from recorded holograms works even in Kerr media [M. Tsang, D. Psaltis, and F. G. Omenetto, Opt. Lett. 28, 1873 (2003).]. The principle has been experimentally demonstrated recently in defocusing media [C. Barsi, W.Wan, and J.W. Fleischer, Nat. Photonics 3, 211 (2009).]. Here, we report experimental results in focusing media.

  7. Storage and retrieval of large digital images

    DOE Patents [OSTI]

    Bradley, Jonathan N.

    1998-01-01

    Image compression and viewing are implemented with (1) a method for performing DWT-based compression on a large digital image with a computer system possessing a two-level system of memory and (2) a method for selectively viewing areas of the image from its compressed representation at multiple resolutions and, if desired, in a client-server environment. The compression of a large digital image I(x,y) is accomplished by first defining a plurality of discrete tile image data subsets T.sub.ij (x,y) that, upon superposition, form the complete set of image data I(x,y). A seamless wavelet-based compression process is effected on I(x,y) that is comprised of successively inputting the tiles T.sub.ij (x,y) in a selected sequence to a DWT routine, and storing the resulting DWT coefficients in a first primary memory. These coefficients are periodically compressed and transferred to a secondary memory to maintain sufficient memory in the primary memory for data processing. The sequence of DWT operations on the tiles T.sub.ij (x,y) effectively calculates a seamless DWT of I(x,y). Data retrieval consists of specifying a resolution and a region of I(x,y) for display. The subset of stored DWT coefficients corresponding to each requested scene is determined and then decompressed for input to an inverse DWT, the output of which forms the image display. The repeated process whereby image views are specified may take the form an interaction with a computer pointing device on an image display from a previous retrieval.

  8. Storage and retrieval of large digital images

    DOE Patents [OSTI]

    Bradley, J.N.

    1998-01-20

    Image compression and viewing are implemented with (1) a method for performing DWT-based compression on a large digital image with a computer system possessing a two-level system of memory and (2) a method for selectively viewing areas of the image from its compressed representation at multiple resolutions and, if desired, in a client-server environment. The compression of a large digital image I(x,y) is accomplished by first defining a plurality of discrete tile image data subsets T{sub ij}(x,y) that, upon superposition, form the complete set of image data I(x,y). A seamless wavelet-based compression process is effected on I(x,y) that is comprised of successively inputting the tiles T{sub ij}(x,y) in a selected sequence to a DWT routine, and storing the resulting DWT coefficients in a first primary memory. These coefficients are periodically compressed and transferred to a secondary memory to maintain sufficient memory in the primary memory for data processing. The sequence of DWT operations on the tiles T{sub ij}(x,y) effectively calculates a seamless DWT of I(x,y). Data retrieval consists of specifying a resolution and a region of I(x,y) for display. The subset of stored DWT coefficients corresponding to each requested scene is determined and then decompressed for input to an inverse DWT, the output of which forms the image display. The repeated process whereby image views are specified may take the form an interaction with a computer pointing device on an image display from a previous retrieval. 6 figs.

  9. Digital Architecture – Results From a Gap Analysis

    SciTech Connect (OSTI)

    Oxstrand, Johanna Helene; Thomas, Kenneth David; Fitzgerald, Kirk

    2015-09-01

    The digital architecture is defined as a collection of IT capabilities needed to support and integrate a wide-spectrum of real-time digital capabilities for nuclear power plant performance improvements. The digital architecture can be thought of as an integration of the separate I&C and information systems already in place in NPPs, brought together for the purpose of creating new levels of automation in NPP work activities. In some cases, it might be an extension of the current communication systems, to provide digital communications where they are currently analog only. This collection of IT capabilities must in turn be based on a set of user requirements that must be supported for the interconnected technologies to operate in an integrated manner. These requirements, simply put, are a statement of what sorts of digital work functions will be exercised in a fully-implemented seamless digital environment and how much they will be used. The goal of the digital architecture research is to develop a methodology for mapping nuclear power plant operational and support activities into the digital architecture, which includes the development of a consensus model for advanced information and control architecture. The consensus model should be developed at a level of detail that is useful to the industry. In other words, not so detailed that it specifies specific protocols and not so vague that it is only provides a high level description of technology. The next step towards the model development is to determine the current state of digital architecture at typical NPPs. To investigate the current state, the researchers conducted a gap analysis to determine to what extent the NPPs can support the future digital technology environment with their existing I&C and IT structure, and where gaps exist with respect to the full deployment of technology over time. The methodology, result, and conclusions from the gap analysis are described in this report.

  10. NOTICE TO SUPPLIERS Fraudulent Quote Requests/Purchase Order E-Mail Activity

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    * The email message may be poorly written, with misspellings and awkward sentence structure. * The sender's email address is not the same as CNS standard email address domain. The email address domain for Y-12: xxx@y12.doe.gov, for Pantex: xxx@pantex.com. Email from either site may also be in this form: xxx@cns.doe.gov. * The message and purchase order requests shipment/delivery of products to non-CNS facilities. * The message will include an attachment that is designed to look like a purchase

  11. NOTICE TO SUPPLIERS Fraudulent Quote Requests/Purchase Order E-Mail Activity

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

     The email message may be poorly written, with misspellings and awkward sentence structure.  The senders email address is not the same as CNS standard email address domain. The email address domain for Y-12: xxx@y12.doe.gov, for Pantex: xxx@pantex.com.  The message and purchase order requests shipment/delivery of products to non-CNS facilities.  The message will include an attachment that is designed to look like a purchase order, and includes a logo or other graphic, and a signature

  12. EA-1991: 10 CFR 433 and 10 CFR 435: Green Building Certification Program Requirements

    Broader source: Energy.gov [DOE]

    This EA originally addressed the sustainable design requirements contained in the Federal building rule. Since the Notice of Proposed Rulemaking (NOPR), however, the DOE has modified and downscaled this rule to a procedural rule that only addresses only the green building certification requirements. While the final rule is significantly downscaled from the proposed rule, due to the fact that the previous EA was put out for public review, is tied to this rulemaking, and in order to maintain the integrity of the NEPA process, we continue to use the EA process for this rulemaking.

  13. Guide to Purchasing Green Power: Renewable Electricity, Renewable Energy Certificates, and On-Site Renewable Generation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Purchasing Green Power Renewable Electricity, Renewable Energy Certificates, and On-Site Renewable Generation DOE/EE-0307 This guide can be downloaded from: www1.eere.energy.gov/femp/technologies/renewable_purchasingpower.html www.epa.gov/greenpower/ www.wri.org/publications www.resource-solutions.org/publications.php Office of Air (6202J) EPA430-K-04-015 www.epa.gov/greenpower March 2010 ISBN: 1-56973-577-8 Guide to Purchasing Green Power i Table of Contents Summary

  14. Updated Class Deviation for FAR 52.209-5, Certifications Regarding Responsibility Matters

    Broader source: Energy.gov [DOE]

    Attached is the updated DOE Class Deviation for FAR 52.209-5, Certifications Regarding Responsibility Matters, addressing felony convictions under Federal laws and unpaid Federal tax liabilities. This Class Deviation was previously provided in Policy Flash 2012-40. The Class Deviation has been updated to reflect additional direction to federal agencies contained in Civilian Agency Acquisition Letter 2014-01. Solicitation provisions are now included for FY 2012 and 2013 funding actions, and for FY 2014 and subsequent year funding actions. A FAR case has been initiated to formally incorporate the guidance into the FAR.

  15. Theoretical investigations of defects in a Si-based digital ferromagne...

    Office of Scientific and Technical Information (OSTI)

    digital ferromagnetic heterostructure - a spintronic material Citation Details In-Document Search Title: Theoretical investigations of defects in a Si-based digital ...

  16. REVIEW OF NRC APPROVED DIGITAL CONTROL SYSTEMS ANALYSIS

    SciTech Connect (OSTI)

    D.W. Markman

    1999-09-17

    Preliminary design concepts for the proposed Subsurface Repository at Yucca Mountain indicate extensive reliance on modern, computer-based, digital control technologies. The purpose of this analysis is to investigate the degree to which the U. S. Nuclear Regulatory Commission (NRC) has accepted and approved the use of digital control technology for safety-related applications within the nuclear power industry. This analysis reviews cases of existing digitally-based control systems that have been approved by the NRC. These cases can serve as precedence for using similar types of digitally-based control technologies within the Subsurface Repository. While it is anticipated that the Yucca Mountain Project (YMP) will not contain control systems as complex as those required for a nuclear power plant, the review of these existing NRC approved applications will provide the YMP with valuable insight into the NRCs review process and design expectations for safety-related digital control systems. According to the YMP Compliance Program Guidance, portions of various NUREGS, Regulatory Guidelines, and nuclear IEEE standards the nuclear power plant safety related concept would be applied to some of the designs on a case-by-case basis. This analysis will consider key design methods, capabilities, successes, and important limitations or problems of selected control systems that have been approved for use in the Nuclear Power industry. An additional purpose of this analysis is to provide background information in support of further development of design criteria for the YMP. The scope and primary objectives of this analysis are to: (1) Identify and research the extent and precedence of digital control and remotely operated systems approved by the NRC for the nuclear power industry. Help provide a basis for using and relying on digital technologies for nuclear related safety critical applications. (2) Identify the basic control architecture and methods of key digital control

  17. Certification review of the DC-1 packaging for transport of HEU oxide

    SciTech Connect (OSTI)

    Primeau, S.J.; Thomas, G.R.

    1995-11-01

    The DC-1, a packaging for the transport of up to 19.7 kg of high-enriched uranium oxide, has been submitted for Department of Energy (DOE) Headquarters certification. The technical review for regulatory compliance is discussed from the reviewer`s standpoint, with emphasis on three notable aspects of the packaging design: (1) The packaging is the first submitted for DOE certification under the provisions of 10 CFR 71.55(c). (2) The containment vessels were fabricated in accordance with Section 8 of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code; however, additional inspection requirements were imposed at the time of fabrication. Compliance with the requirements of Section 3 of the ASME Code is discussed. (3) A temporary adapter plate is installed between the lid and body of each containment vessel to facilitate periodic leak testing of the containment boundaries. This procedure is compared against the recommendations in the American National Standards Institute (ANSI) N14.5 Standard.

  18. Certification of a Standard Reference Material for organics in crude oil

    SciTech Connect (OSTI)

    Not Available

    1983-06-20

    The objective of this program was to provide a complex matrix Standard Reference Material (SRM) certified for the concentrations of selected toxic organic compounds. This SRM will be useful in the chemical characterization and quality assurance efforts and methods development research of laboratories involved in the organic compound characterization of fuels. A petroleum crude oil (Wilmington crude) was selected as the matrix to be used in this effort. This material, when certified, will serve as a companion to SRM 1580, Organics in Shale Oil, that was certified in 1980 with Department of Energy support. The use of both SRM's will provide researchers with two points of calibration for analyses of compounds that are certified in both materials. In general, the certification of SRM's is accomplished through utilization of at least two totally independent techniques of analysis. In order for a parameter to be certified, the results of analyses by these independent methods must agree. The degree of agreement is specified as the uncertainty on the Certificate of Analysis. We have determined the concentrations of dibenzothiophene, phenol, o-cresol, and six polycyclic aromatic hydrocarbons by two independent analytical procedures each. Carbazole and benzo(e)pyrene were determined by electron impact gas chromatography/mass spectrometry (GC/MS) only. A summary of all results to date appears in the table appended to this report.

  19. Evaluation of the U.S. Department of Energy Challenge Home Program Certification of Production Builders

    SciTech Connect (OSTI)

    Kerrigan, P.; Loomis, H.

    2014-09-01

    The purpose of this project was to evaluate integrated packages of advanced measures in individual test homes to assess their performance with respect to Building America Program goals, specifically compliance with the DOE Challenge Home Program. BSC consulted on the construction of five test houses by three Cold Climate production builders in three separate US cities. BSC worked with the builders to develop a design package tailored to the cost-related impacts for each builder. Therefore, the resulting design packages do vary from builder to builder. BSC provided support through this research project on the design, construction and performance testing of the five test homes. Overall, the builders have concluded that the energy related upgrades (either through the prescriptive or performance path) represent reasonable upgrades. The builders commented that while not every improvement in specification was cost effective (as in a reasonable payback period), many were improvements that could improve the marketability of the homes and serve to attract more energy efficiency discerning prospective homeowners. However, the builders did express reservations on the associated checklists and added certifications. An increase in administrative time was observed with all builders. The checklists and certifications also inherently increase cost due to: 1. Adding services to the scope of work for various trades, such as HERS Rater, HVAC contractor; 2. Increased material costs related to the checklists, especially the EPA Indoor airPLUS and EPA WaterSense(R) Efficient Hot Water Distribution requirement.

  20. Certification of the Mound 1 kW package for shipping of plutonium dioxide source material

    SciTech Connect (OSTI)

    Annese, C.E.; Mount, M.K.

    1994-01-01

    The Department of Energy (DOE) has established procedures for obtaining certification of packagings used by DOE and its contractors for the transport of radioactive materials. Specifically, DOE Orders 5480.3 and 1540.2 provide references for other DOE Orders which must be followed when an applicant submits a Safety Analysis Report for Packaging (SARP). From the orders, Department EH of DOE, has internal oversight responsibility for transportation and Packaging safety; package certification falls under EH responsibility; transportation and packaging safety division in EH certifies packages for DOE; and use of DOE certified packages is authorized by DOT. An independent review of the SARP must confirm that the packaging designs and operations meet safety criteria at least equivalent to these standards. This paper will discuss the independent review process of the shielding section of the Mound 1 kW SARP; describe the geometry of the packaging and the load configurations; discuss the analysis of the various neutron and photon source terms that were used for the load configuration under analysis; and provide illustrations of the use of the monte-carlo code, COG{sup 3}, which was utilized to perform the shielding analysis.

  1. Evaluation of the U.S. Department of Energy Challenge Home Program Certification of Production Builders

    SciTech Connect (OSTI)

    Kerrigan, P.; Loomis, H.

    2014-09-01

    The purpose of this project was to evaluate integrated packages of advanced measures in individual test homes to assess their performance with respect to Building America program goals, specifically compliance with the DOE Challenge Home Program. BSC consulted on the construction of five test houses by three cold climate production builders in three U.S. cities and worked with the builders to develop a design package tailored to the cost-related impacts for each builder. Also, BSC provided support through performance testing of the five test homes. Overall, the builders have concluded that the energy related upgrades (either through the prescriptive or performance path) represent reasonable upgrades. The builders commented that while not every improvement in specification was cost effective (as in a reasonable payback period), many were improvements that could improve the marketability of the homes and serve to attract more energy efficiency discerning prospective homeowners. However, the builders did express reservations on the associated checklists and added certifications. An increase in administrative time was observed with all builders. The checklists and certifications also inherently increase cost due to: adding services to the scope of work for various trades, such as HERS Rater, HVAC contractor; and increased material costs related to the checklists, especially the EPA Indoor airPLUS and EPA WaterSense® Efficient Hot Water Distribution requirement.

  2. DOT Specification 7A Type A packaging certification study: getting ready for July 1, 1985

    SciTech Connect (OSTI)

    Edling, D.A.

    1985-01-01

    The Department of Energy has funded Mound to revise the Type A Packaging Certification Study originally issued in June 1975. An updated document is necessary because, effective July 1, 1985, 49 CFR 173.412(b) requires that any Spec. 7A packaging designed, manufactured, or certified after that date must be certified according to the Type A packaging test given in 173.465. As a result, shippers of Spec. 7A packagings must test and analyze their packaging and prepare a certification document before July 1985 in order to continue uninterrupted operation. (It should be noted that existing Spec. 7A packages manufactured and certified prior to July 1, 1985, may be used as long as the packagings continue to meet the Spec. 7A requirements. However, a Type A packaging designed, manufactured, or certified after July 1, 1985, must meet the requirements of 49 CFR effective on July 1, 1985.) Mound will identify those Type A packagings commonly used by DOE contractors and will begin a testing and analysis program to determine which packagings meet the new Type A requirement. Those packagings certified as DOE Spec. 7A Type A packagings will be featured in a document for all of DOE to use. 5 tabs.

  3. Feed-forward digital phase and amplitude correction system

    DOE Patents [OSTI]

    Yu, D.U.L.; Conway, P.H.

    1994-11-15

    Phase and amplitude modifications in repeatable RF pulses at the output of a high power pulsed microwave amplifier are made utilizing a digital feed-forward correction system. A controlled amount of the output power is coupled to a correction system for processing of phase and amplitude information. The correction system comprises circuitry to compare the detected phase and amplitude with the desired phase and amplitude, respectively, and a digitally programmable phase shifter and attenuator and digital logic circuitry to control the phase shifter and attenuator. The phase and amplitude of subsequent are modified by output signals from the correction system. 11 figs.

  4. Feed-forward digital phase and amplitude correction system

    DOE Patents [OSTI]

    Yu, David U. L.; Conway, Patrick H.

    1994-01-01

    Phase and amplitude modifications in repeatable RF pulses at the output of a high power pulsed microwave amplifier are made utilizing a digital feed-forward correction system. A controlled amount of the output power is coupled to a correction system for processing of phase and amplitude information. The correction system comprises circuitry to compare the detected phase and amplitude with the desired phase and amplitude, respectively, and a digitally programmable phase shifter and attenuator and digital logic circuitry to control the phase shifter and attenuator. The Phase and amplitude of subsequent are modified by output signals from the correction system.

  5. A Modular, Standards-based Digital Object Repository

    Energy Science and Technology Software Center (OSTI)

    2005-08-01

    The aDORe repository architecture, designed and implemented for ingesting, storing, and accessing a vast collection of Digital Objects. aDORe was originally created for use at the Research Library of the Los Alamos National Laboratory. The aDORe architecture is highly modular and standards-based. In the architecture, the MPEG-21 Digital Item Declaration Language is used as the XML-based format to represent Digital Objects that can consist of multiple datastreams as Open Archival Information System Archival Information Packagesmore » (OAIS AIPs).« less

  6. Optical domain analog to digital conversion methods and apparatus

    DOE Patents [OSTI]

    Vawter, Gregory A

    2014-05-13

    Methods and apparatus for optical analog to digital conversion are disclosed. An optical signal is converted by mapping the optical analog signal onto a wavelength modulated optical beam, passing the mapped beam through interferometers to generate analog bit representation signals, and converting the analog bit representation signals into an optical digital signal. A photodiode receives an optical analog signal, a wavelength modulated laser coupled to the photodiode maps the optical analog signal to a wavelength modulated optical beam, interferometers produce an analog bit representation signal from the mapped wavelength modulated optical beam, and sample and threshold circuits corresponding to the interferometers produce a digital bit signal from the analog bit representation signal.

  7. Bringing a Digital Mindset to Manufacturing | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Bringing a Digital Mindset to Manufacturing Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click to share on LinkedIn (Opens in new window) Click to share on Tumblr (Opens in new window) Bringing a Digital Mindset to Manufacturing The digital age will provide manufacturing insights that will save money and transform how we work across supply chains. By Christine M. Furstoss Technology Director, Materials &

  8. Digital data storage systems, computers, and data verification methods

    DOE Patents [OSTI]

    Groeneveld, Bennett J.; Austad, Wayne E.; Walsh, Stuart C.; Herring, Catherine A.

    2005-12-27

    Digital data storage systems, computers, and data verification methods are provided. According to a first aspect of the invention, a computer includes an interface adapted to couple with a dynamic database; and processing circuitry configured to provide a first hash from digital data stored within a portion of the dynamic database at an initial moment in time, to provide a second hash from digital data stored within the portion of the dynamic database at a subsequent moment in time, and to compare the first hash and the second hash.

  9. Criteria and Processes for the Certification of Non-Radioactive Hazardous and Non-Hazardous Wastes

    SciTech Connect (OSTI)

    Dominick, J

    2008-12-18

    This document details Lawrence Livermore National Laboratory's (LLNL) criteria and processes for determining if potentially volumetrically contaminated or potentially surface contaminated wastes are to be managed as material containing residual radioactivity or as non-radioactive. This document updates and replaces UCRL-AR-109662, Criteria and Procedures for the Certification of Nonradioactive Hazardous Waste (Reference 1), also known as 'The Moratorium', and follows the guidance found in the U.S. Department of Energy (DOE) document, Performance Objective for Certification of Non-Radioactive Hazardous Waste (Reference 2). The 1992 Moratorium document (UCRL-AR-109662) is three volumes and 703 pages. The first volume provides an overview of the certification process and lists the key radioanalytical methods and their associated Limits of Sensitivities. Volumes Two and Three contain supporting documents and include over 30 operating procedures, QA plans, training documents and organizational charts that describe the hazardous and radioactive waste management system in place in 1992. This current document is intended to update the previous Moratorium documents and to serve as the top-tier LLNL institutional Moratorium document. The 1992 Moratorium document was restricted to certification of Resource Conservation and Recovery Act (RCRA), State and Toxic Substances Control Act (TSCA) hazardous waste from Radioactive Material Management Areas (RMMA). This still remains the primary focus of the Moratorium; however, this document increases the scope to allow use of this methodology to certify other LLNL wastes and materials destined for off-site disposal, transfer, and re-use including non-hazardous wastes and wastes generated outside of RMMAs with the potential for DOE added radioactivity. The LLNL organization that authorizes off-site transfer/disposal of a material or waste stream is responsible for implementing the requirements of this document. The LLNL Radioactive and

  10. Transient digitizer with displacement current samplers

    DOE Patents [OSTI]

    McEwan, Thomas E.

    1996-01-01

    A low component count, high speed sample gate, and digitizer architecture using the sample gates is based on use of a signal transmission line, a strobe transmission line and a plurality of sample gates connected to the sample transmission line at a plurality of positions. The sample gates include a strobe pickoff structure near the strobe transmission line which generates a charge displacement current in response to propagation of the strobe signal on the strobe transmission line sufficient to trigger the sample gate. The sample gate comprises a two-diode sampling bridge and is connected to a meandered signal transmission line at one end and to a charge-holding cap at the other. The common cathodes are reverse biased. A voltage step is propagated down the strobe transmission line. As the step propagates past a capacitive pickoff, displacement current i=c(dv/dT), flows into the cathodes, driving the bridge into conduction and thereby charging the charge-holding capacitor to a value related to the signal. A charge amplifier converts the charge on the charge-holding capacitor to an output voltage. The sampler is mounted on a printed circuit board, and the sample transmission line and strobe transmission line comprise coplanar microstrips formed on a surface of the substrate. Also, the strobe pickoff structure may comprise a planar pad adjacent the strobe transmission line on the printed circuit board.

  11. Transient digitizer with displacement current samplers

    DOE Patents [OSTI]

    McEwan, T.E.

    1996-05-21

    A low component count, high speed sample gate, and digitizer architecture using the sample gates is based on use of a signal transmission line, a strobe transmission line and a plurality of sample gates connected to the sample transmission line at a plurality of positions. The sample gates include a strobe pickoff structure near the strobe transmission line which generates a charge displacement current in response to propagation of the strobe signal on the strobe transmission line sufficient to trigger the sample gate. The sample gate comprises a two-diode sampling bridge and is connected to a meandered signal transmission line at one end and to a charge-holding cap at the other. The common cathodes are reverse biased. A voltage step is propagated down the strobe transmission line. As the step propagates past a capacitive pickoff, displacement current i=c(dv/dT), flows into the cathodes, driving the bridge into conduction and thereby charging the charge-holding capacitor to a value related to the signal. A charge amplifier converts the charge on the charge-holding capacitor to an output voltage. The sampler is mounted on a printed circuit board, and the sample transmission line and strobe transmission line comprise coplanar microstrips formed on a surface of the substrate. Also, the strobe pickoff structure may comprise a planar pad adjacent the strobe transmission line on the printed circuit board. 16 figs.

  12. Self Certifications

    Broader source: Energy.gov [DOE]

    Title II of the Powerplant and Industrial Fuel Use Act of 1978 (FUA), as amended (42 U.S.C. 8301 et seq.), provides that no new baseload electric powerplant may be constructed or operated without the capability to use coal or another alternate fuel as a primary energy source. In order to meet the requirement of coal capability, the owner or operator of such facilities proposing to use natural gas or petroleum as its primary energy source shall certify, pursuant to FUA section 201(d), and Section 501.60(a)(2) of DOE's regulations to the Secretary of Energy prior to construction, or prior to operation as a base load powerplant, that such powerplant has the capability to use coal or another alternate fuel.

  13. Digital Television and Media Innovations | Princeton Plasma Physics...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    28, 2007, 4:15pm to 5:15pm Colloquia MBG Auditorium Digital Television and Media Innovations Dr. Michael A. Isnardi Sarnoff Corporation Colloquium Committee: The Princeton Plasma...

  14. OSTIblog Articles in the digitization Topic | OSTI, US Dept of...

    Office of Scientific and Technical Information (OSTI)

    ... OSTI's most recent contributions to... Related Topics: digitization, DOE Green Energy, preservation, Science.gov, ScienceCinema, ScienceEducation.gov Read more... You Can Be a Part ...

  15. Sandia Lightning Early Warning Network: Digital-based upgrade

    SciTech Connect (OSTI)

    Boyd, G.M.

    1994-05-01

    This report describes the layout and operation of the recently upgraded Sandia Lightning Early Warning Network, which was upgraded from an analog-based to a digital-based telemetry system.

  16. Live Broadcast on Transforming Digital Technologies Across Government

    Broader source: Energy.gov [DOE]

    On Thursday, March 24 at 1:00pm ET, join the Office of the Chief Information Office for a discussion on transforming digital technologies across the federal government.

  17. EERE Website and Digital Media Standards and Guidelines

    Broader source: Energy.gov [DOE]

    Find guidance on the Office of Energy Efficiency and Renewable Energy’s (EERE’s) requirements, standards, and best practices for websites and other digital media such as applications, videos, and social media.

  18. LM Completes X-Ray Film Digitization Project

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy (DOE) Office of Legacy Management (LM) has successfully completed a project to digitize nearly 400,000 medical x‑rays of former DOE contractor employees.

  19. GE's Digital Marketplace to Revolutionize Manufacturing | GE Global

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research GE's Digital Marketplace to Revolutionize Manufacturing Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click to share on LinkedIn (Opens in new window) Click to share on Tumblr (Opens in new window) GE's Digital Marketplace to Revolutionize Manufacturing GE will lead an effort to create an online community for manufacturing collaboration and data analysis The open source project will build the

  20. MULTIPLE INPUT BINARY ADDER EMPLOYING MAGNETIC DRUM DIGITAL COMPUTING APPARATUS

    DOE Patents [OSTI]

    Cooke-Yarborough, E.H.

    1960-12-01

    A digital computing apparatus is described for adding a plurality of multi-digit binary numbers. The apparatus comprises a rotating magnetic drum, a recording head, first and second reading heads disposed adjacent to the first and second recording tracks, and a series of timing signals recorded on the first track. A series of N groups of digit-representing signals is delivered to the recording head at time intervals corresponding to the timing signals, each group consisting of digits of the same significance in the numbers, and the signal series is recorded on the second track of the drum in synchronism with the timing signals on the first track. The multistage registers are stepped cyclically through all positions, and each of the multistage registers is coupled to the control lead of a separate gate circuit to open the corresponding gate at only one selected position in each cycle. One of the gates has its input coupled to the bistable element to receive the sum digit, and the output lead of this gate is coupled to the recording device. The inputs of the other gates receive the digits to be added from the second reading head, and the outputs of these gates are coupled to the adding register. A phase-setting pulse source is connected to each of the multistage registers individually to step the multistage registers to different initial positions in the cycle, and the phase-setting pulse source is actuated each N time interval to shift a sum digit to the bistable element, where the multistage register coupled to bistable element is operated by the phase- setting pulse source to that position in its cycle N steps before opening the first gate, so that this gate opens in synchronism with each of the shifts to pass the sum digits to the recording head.

  1. Digital-data receiver synchronization method and apparatus

    DOE Patents [OSTI]

    Smith, Stephen F. [Loudon, TN; Turner, Gary W. [Clinton, TN

    2009-09-08

    Digital data receiver synchronization is provided with composite phase-frequency detectors, mutually cross-connected comparison feedback or both to provide robust reception of digital data signals. A single master clock can be used to provide frequency signals. Advantages can include fast lock-up time in moderately to severely noisy conditions, greater tolerance to noise and jitter when locked, and improved tolerance to clock asymmetries.

  2. Digital-data receiver synchronization method and apparatus

    DOE Patents [OSTI]

    Smith, Stephen F.; Turner, Gary W.

    2005-12-06

    Digital-data receiver synchronization is provided with composite phase-frequency detectors, mutually cross-connected comparison feedback or both to provide robust reception of digital data signals. A single master clock may be used to provide frequency signals. Advantages can include fast lock-up time in moderately to severely noisy conditions, greater tolerance to noise and jitter when locked, and improved tolerance to clock asymmetries.

  3. DOE Data ID Service - Digital object identifiers for DOE scientific

    Office of Scientific and Technical Information (OSTI)

    research datasets | OSTI, US Dept of Energy Office of Scientific and Technical Information Data ID Service DataCite | Contact DOE Data ID Service DOE Data ID Service DOE Data ID Service The DOE Office of Scientific and Technical Information (OSTI) offers a service for registering datasets to help increase access to digital data from DOE-funded scientific research. Through the DOE Data ID Service, OSTI assigns persistent identifiers, known as Digital Object Identifiers (DOIs), to datasets

  4. An in-line thermal-neutron coincidence counter for WIPP (Waste Isolation Pilot Plant) certification measurements

    SciTech Connect (OSTI)

    Krick, M.S.; Osborne, L.; Polk, P.J.; Atencio, J.D.; Bjork, C.

    1989-10-01

    A custom-designed, in-line, thermal-neutron coincidence counter has been constructed for the certification of plutonium waste intended for storage at the Waste Isolation Pilot Plant. The mechanical and electrical components of the system and its performance characteristics are described. 6 refs., 16 figs.

  5. Data Acquisition Scan for Large Area Flat Panel Digital X-ray Detector Array

    Energy Science and Technology Software Center (OSTI)

    2004-05-01

    Interface large area flat panel digital detector and motion control system for computed tomographic data acquisition.

  6. The production and certification of a plutonium equal-atom reference material: NBL CRM 128

    SciTech Connect (OSTI)

    Crawford, D.W. . Office of Safeguards and Security); Gradle, C.G.; Soriano, M.D. )

    1990-07-01

    This report describes the design, production, and certification of the New Brunswick Laboratory plutonium equal-atom certified reference material (CRM), NBL CRM 128. The primary use of this CRM is for the determination of bias corrections encountered in the operation of a mass spectrometer. This reference material is available to the US Department of Energy contractor-operated and government-operated laboratories, as well as to the international nuclear safeguards community. The absolute, or unbiased, certified value for the CRM's Pu-242/Pu-239 ratio is 1.00063 {plus minus} 0.00026 (95% confidence interval) as of October 1, 1984. This value was obtained through the quantitative blending of high-purity, chemically and isotopically characterized separated isotopes, as well as through intercomparisons of CRM samples with calibration mixtures using thermal ionization mass spectrometry. 32 tabs.

  7. Development and certification of the innovative pioneer oil burner for residential heating appliances

    SciTech Connect (OSTI)

    Kamath, B.

    1997-09-01

    The Pioneer burner represents another important milestone for the oil heat industry. It is the first practical burner design that is designated for use in small capacity heating appliances matching the needs of modern energy efficient home designs. Firing in the range of 0.3 GPH to 0.65 GPH (40,000-90,000 Btu/hr) it allows for new oil heating appliance designs to compete with the other major fuel choices in the small design load residential market. This market includes energy efficient single family houses, town-houses, condominiums, modular units, and mobile homes. The firing range also is wide enough to cover a large percentage of more conventional heating equipment and home designs as well. Having recently passed Underwriters Laboratory certification tests the burner in now being field tested in several homes and samples are being made available to interested boiler and furnace manufacturers for product development and application testing.

  8. Case studies of the application of the Certification Framework to two geologic carbon sequestration sites

    SciTech Connect (OSTI)

    Oldenburg, Curtis M.; Nicot, J.-P.; Bryant, S.L.

    2008-11-01

    We have developed a certification framework (CF) for certifying that the risks of geologic carbon sequestration (GCS) sites are below agreed-upon thresholds. The CF is based on effective trapping of CO2, the proposed concept that takes into account both the probability and impact of CO2 leakage. The CF uses probability estimates of the intersection of conductive faults and wells with the CO2 plume along with modeled fluxes or concentrations of CO2 as proxies for impacts to compartments (such as potable groundwater) to calculate CO2 leakage risk. In order to test and refine the approach, we applied the CF to (1) a hypothetical large-scale GCS project in the Texas Gulf Coast, and (2) WESTCARB's Phase III GCS pilot in the southern San Joaquin Valley, California.

  9. Lightning Protection Certification for High Explosives Facilities at Lawrence Livermore National Laboratory

    SciTech Connect (OSTI)

    Clancy, T J; Brown, C G; Ong, M M; Clark, G A

    2006-01-11

    Presented here is an innovation in lighting safety certification, and a description of its implementation for high explosives processing and storage facilities at Lawrence Livermore National Laboratory. Lightning rods have proven useful in the protection of wooden structures; however, modern structures made of rebar, concrete, and the like, require fresh thinking. Our process involves a rigorous and unique approach to lightning safety for modern buildings, where the internal voltages and currents are quantified and the risk assessed. To follow are the main technical aspects of lightning protection for modern structures and these methods comply with the requirements of the National Fire Protection Association, the National Electrical Code, and the Department of Energy [1][2]. At the date of this release, we have certified over 70 HE processing and storage cells at our Site 300 facility.

  10. Model Components of the Certification Framework for Geologic Carbon Sequestration Risk Assessment

    SciTech Connect (OSTI)

    Oldenburg, Curtis M.; Bryant, Steven L.; Nicot, Jean-Philippe; Kumar, Navanit; Zhang, Yingqi; Jordan, Preston; Pan, Lehua; Granvold, Patrick; Chow, Fotini K.

    2009-06-01

    We have developed a framework for assessing the leakage risk of geologic carbon sequestration sites. This framework, known as the Certification Framework (CF), emphasizes wells and faults as the primary potential leakage conduits. Vulnerable resources are grouped into compartments, and impacts due to leakage are quantified by the leakage flux or concentrations that could potentially occur in compartments under various scenarios. The CF utilizes several model components to simulate leakage scenarios. One model component is a catalog of results of reservoir simulations that can be queried to estimate plume travel distances and times, rather than requiring CF users to run new reservoir simulations for each case. Other model components developed for the CF and described here include fault characterization using fault-population statistics; fault connection probability using fuzzy rules; well-flow modeling with a drift-flux model implemented in TOUGH2; and atmospheric dense-gas dispersion using a mesoscale weather prediction code.

  11. Los Alamos National Laboratory transuranic waste characterization and certification program - an overview of capabilities and capacity

    SciTech Connect (OSTI)

    Rogers, P.S.Z.; Sinkule, B.J.; Janecky, D.R.; Gavett, M.A. [and others

    1997-02-01

    The Los Alamos National Laboratory (LANL) has full capability to characterize transuranic (TRU) waste for shipment to and disposal at the Waste Isolation Pilot Plant (WIPP) for its projected opening. LANL TRU waste management operations also include facilities to repackage both drums of waste found not to be certifiable for WIPP and oversized boxes of waste that must be size reduced for shipment to WIPP. All characterization activities and repackaging are carried out under a quality assurance program designed to meet Carlsbad Area Office (CAO) requirements. The flow of waste containers through characterization operations, the facilities used for characterization, and the electronic data management system used for data package preparation and certification of TRU waste at LANL are described.

  12. Getting waste ready for shipment to the WIPP: integration of characterization and certification activities

    SciTech Connect (OSTI)

    Sinkule, B.; Knudsen, K.; Rogers, P.

    1996-06-01

    The Waste Isolation Pilot Plant (WIPP) Waste Acceptance Criteria (WAC) serve as the primary directive for assuring the safe handling, transportation, and disposal of transuranic (TRU) waste generated at Department of Energy (DOE) sites. The WIPP WAC address fulfillment of WIPP`s operational safety and performance assessment criteria, compliance with Resource Conservation and Recovery Act (RCRA) requirements, and preparation of waste packages that meet all transportation criteria. At individual generator sites, preparation of transuranic waste for final disposal at WIPP includes characterizing the waste to meet the requirements of the transuranic Waste Characterization Quality Assurance Program Plan (QAPP) and certifying waste containers to meet the WIPP WAC and the Transuranic Package Transporter-II Authorized Methods for Payload Control (TRAMPAC). This paper compares the quality assurance and quality control requirements specified in the WIPP WAC, QAPP, and TRAMPAC and discusses the potential to consolidate activities to comply with the TRU waste characterization and certification program requirements.

  13. Technology certification and technology acceptance: Promoting interstate cooperation and market development for innovative technologies

    SciTech Connect (OSTI)

    Brockbank, B.R.

    1995-03-01

    In the past two years, public and private efforts to promote development and deployment of innovative environmental technologies have shifted from the analysis of barriers to the implementation of a variety of initiatives aimed at surmounting those barriers. Particular attention has been directed at (1) streamlining fragmented technology acceptance processes within and among the states, and (2) alleviating disincentives, created by inadequate or unverified technology cost and performance data, for users and regulators to choose innovative technologies. Market fragmentation currently imposes significant cost burdens on technology developers and inhibits the investment of private capital in environmental technology companies. Among the responses to these problems are state and federal technology certification/validation programs, efforts to standardize cost/performance data reporting, and initiatives aimed at promoting interstate cooperation in technology testing and evaluation. This paper reviews the current status of these initiatives, identifies critical challenges to their success, and recommends strategies for addressing those challenges.

  14. Field Sampling Plan for the HWMA/RCRA Closure Certification of the TRA-731 Caustic and Acid Storage Tank System - 1997 Notice of Violation Consent Order

    SciTech Connect (OSTI)

    Evans, S.K.

    2002-01-31

    This Field Sampling Plan for the HWMA/RCRA Closure Certification of the TRA-731 Caustic and Acid Storage Tank System is one of two documents that comprise the Sampling and Analysis Plan for the HWMA/RCRA closure certification of the TRA-731 caustic and acid storage tank system at the Idaho National Engineering and Environmental Laboratory. This plan, which provides information about sampling design, required analyses, and sample collection and handling procedures, is to be used in conjunction with the Quality Assurance Project Plan for the HWMA/RCRA Closure Certification of the TRA-731 Caustic and Acid Storage Tank System.

  15. Field Sampling Plan for the HWMA/RCRA Closure Certification of the TRA-731 Caustic and Acid Storage Tank System - 1997 Notice of Violation Consent Order

    SciTech Connect (OSTI)

    Evans, Susan Kay; Orchard, B. J.

    2002-01-01

    This Field Sampling Plan for the HWMA/RCRA Closure Certification of the TRA-731 Caustic and Acid Storage Tank System is one of two documents that comprise the Sampling and Analysis Plan for the HWMA/RCRA closure certification of the TRA-731 caustic and acid storage tank system at the Idaho National Engineering and Environmental Laboratory. This plan, which provides information about sampling design, required analyses, and sample collection and handling procedures, is to be used in conjunction with the Quality Assurance Project Plan for the HWMA/RCRA Closure Certification of the TRA-731 Caustic and Acid Storage Tank System.

  16. Digital regulation of a phase controlled power converter

    SciTech Connect (OSTI)

    Schultheiss, C.; Haque, T.

    1995-12-01

    The Relativistic Heavy Ion Collider, now in construction at Brookhaven National Laboratory, will use phase controlled power converters for the main dipole and quadrupole magnet strings. The rectifiers in these power supplies will be controlled by a digital regulator based on the TI 320C30 Digital Signal Processor (DSP). The DSP implements the current loop, the voltage loop, and a system to actively reduce the sub-harmonic ripple components. Digital firing circuits consisting of a phase locked lop and counters are used to fire the SCRs. Corrections for the sub-harmonic reduction are calculated by the DSP and stored in registers in the firing circuit. These corrections are added in hardware, to the over-all firing count provided by the DSP. the resultant count is compared to a reference counter to fire the SCRs. This combination of a digital control system and the digital firing circuits allows the correction of the sub-harmonics in a real-time sense. A prototype of the regulator has been constructed, and the preliminary testing indicates a sub-harmonic reduction of 60 dB.

  17. The FBI compression standard for digitized fingerprint images

    SciTech Connect (OSTI)

    Brislawn, C.M.; Bradley, J.N.; Onyshczak, R.J.; Hopper, T.

    1996-10-01

    The FBI has formulated national standards for digitization and compression of gray-scale fingerprint images. The compression algorithm for the digitized images is based on adaptive uniform scalar quantization of a discrete wavelet transform subband decomposition, a technique referred to as the wavelet/scalar quantization method. The algorithm produces archival-quality images at compression ratios of around 15 to 1 and will allow the current database of paper fingerprint cards to be replaced by digital imagery. A compliance testing program is also being implemented to ensure high standards of image quality and interchangeability of data between different implementations. We will review the current status of the FBI standard, including the compliance testing process and the details of the first-generation encoder.

  18. US Department of Energys Regulatory Negotiations Convening on Commercial Certification for Heating, Ventilating, Air-Conditioning, and Refrigeration Equipment

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    US Department of Energy's Regulatory Negotiations Convening on Commercial Certification for Heating, Ventilating, Air-Conditioning, and Refrigeration Equipment Public Information for Convening Interviews I. What are the substantive issues DOE seeks to address? Strategies for grouping various basic models for purposes of certification; Identification of non-efficiency attributes, which do not impact the measured consumption of the equipment as tested by DOE's test procedure; The information that

  19. Integrated digital metamaterials enables ultra-compact optical diodes

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Shen, Bing; Polson, Randy; Menon, Rajesh

    2015-01-01

    We applied nonlinear optimization to design integrated digital metamaterials in silicon for unidirectional energy flow. Two devices, one for each polarization state, were designed, fabricated, and characterized. Both devices offer comparable or higher transmission efficiencies and extinction ratios, are easier to fabricate, exhibit larger bandwidths and are more tolerant to fabrication errors, when compared to alternatives. Furthermore, each device footprint is only 3?m 3?m, which is the smallest optical diode ever reported. To illustrate the versatility of digital metamaterials, we also designed a polarization-independent optical diode.

  20. Digital Twins of physical assets prevents unplanned downtime | GE Global

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research a 'Digital Twin' for physical assets can help achieve no unplanned downtime Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click to share on LinkedIn (Opens in new window) Click to share on Tumblr (Opens in new window) How a 'Digital Twin' for physical assets can help achieve no unplanned downtime Mark Grabb and Matt Nielsen, data scientists at GE Global Research, explain the importance of data

  1. Digital intermediate frequency QAM modulator using parallel processing

    DOE Patents [OSTI]

    Pao, Hsueh-Yuan; Tran, Binh-Nien

    2008-05-27

    The digital Intermediate Frequency (IF) modulator applies to various modulation types and offers a simple and low cost method to implement a high-speed digital IF modulator using field programmable gate arrays (FPGAs). The architecture eliminates multipliers and sequential processing by storing the pre-computed modulated cosine and sine carriers in ROM look-up-tables (LUTs). The high-speed input data stream is parallel processed using the corresponding LUTs, which reduces the main processing speed, allowing the use of low cost FPGAs.

  2. Preparation and provisional certification of NBL Spectrographic Impurity Standards, CRM 123 (1-7) and 124 (1-7)

    SciTech Connect (OSTI)

    Santoliquido, P.M.

    1983-09-01

    This report describes the design, production, and provisional certification of two new certified reference materials (CRMs): CRM No. 123 (1-7), U/sub 3/O/sub 8/ containing 18 trace elements, and CRM No. 124 (1-7), U/sub 3/O/sub 8/ containing 24 trace elements. The elements to be included and concentrations to be used were decided on the basis of information gathered from users of a previous CRM of this type, CRM No. 98 (1-7). The new CRMs were prepared by the addition of trace elements to high purity U/sub 3/O/sub 8/. Provisional certification was accomplished by an interlaboratory program in which four different laboratories analyzed the materials by carrier distillation dc arc emission spectrography.

  3. Certification Memo for DOE O 137.1B, Plan for Operating in the Event of a

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lapse in Appropriations - DOE Directives, Delegations, and Requirements CURRENT CM, Certification Memo for DOE O 137.1B, Plan for Operating in the Event of a Lapse in Appropriations by Patricia Greeson DOE O 137.1B has been reviewed by my organization and deemed to be in compliance with related Departmental Directives, Secretarial Delegations, organizational structure, budget guidelines, regulations, standards, OMB guidance, relevant memoranda of understanding and public laws. Certificataion

  4. Off-axis illumination direct-to-digital holography

    DOE Patents [OSTI]

    Thomas, Clarence E.; Price, Jeffery R.; Voelkl, Edgar; Hanson, Gregory R.

    2004-06-08

    Systems and methods are described for off-axis illumination direct-to-digital holography. A method of recording an off-axis illuminated spatially heterodyne hologram including spatially heterodyne fringes for Fourier analysis, includes: reflecting a reference beam from a reference mirror at a non-normal angle; reflecting an object beam from an object at an angle with respect to an optical axis defined by a focusing lens; focusing the reference beam and the object beam at a focal plane of a digital recorder to form the off-axis illuminated spatially heterodyne hologram including spatially heterodyne fringes for Fourier analysis; digitally recording the off-axis illuminated spatially heterodyne hologram including spatially heterodyne fringes for Fourier analysis; Fourier analyzing the recorded off-axis illuminated spatially heterodyne hologram including spatially heterodyne fringes by transforming axes of the recorded off-axis illuminated spatially heterodyne hologram including spatially heterodyne fringes in Fourier space to sit on top of a heterodyne carrier frequency defined as an angle between the reference beam and the object beam; applying a digital filter to cut off signals around an original origin; and then performing an inverse Fourier transform.

  5. Apparatus for direct-to-digital spatially-heterodyned holography

    DOE Patents [OSTI]

    Thomas, Clarence E.; Hanson, Gregory R.

    2006-12-12

    An apparatus operable to record a spatially low-frequency heterodyne hologram including spatially heterodyne fringes for Fourier analysis includes: a laser; a beamsplitter optically coupled to the laser; an object optically coupled to the beamsplitter; a focusing lens optically coupled to both the beamsplitter and the object; a digital recorder optically coupled to the focusing lens; and a computer that performs a Fourier transform, applies a digital filter, and performs an inverse Fourier transform. A reference beam and an object beam are focused by the focusing lens at a focal plane of the digital recorder to form a spatially low-frequency heterodyne hologram including spatially heterodyne fringes for Fourier analysis which is recorded by the digital recorder, and the computer transforms the recorded spatially low-frequency heterodyne hologram including spatially heterodyne fringes and shifts axes in Fourier space to sit on top of a heterodyne carrier frequency defined by an angle between the reference beam and the object beam and cuts off signals around an original origin before performing the inverse Fourier transform.

  6. Digital noise generators using one-dimensional chaotic maps

    SciTech Connect (OSTI)

    Martnez-onthe, J. A; Palacios-Luengas, L.; Cruz-Irisson, M.; Vazquez Medina, R.; Daz Mndez, J. A.

    2014-05-15

    This work shows how to improve the statistical distribution of signals produced by digital noise generators designed with one-dimensional (1-D) chaotic maps. It also shows that in a digital electronic design the piecewise linear chaotic maps (PWLCM) should be considered because they do not have stability islands in its chaotic behavior region, as it occurs in the case of the logistic map, which is commonly used to build noise generators. The design and implementation problems of the digital noise generators are analyzed and a solution is proposed. This solution relates the output of PWLCM, usually defined in the real numbers' domain, with a codebook of S elements, previously defined. The proposed solution scheme produces digital noise signals with a statistical distribution close to a uniform distribution. Finally, this work shows that it is possible to have control over the statistical distribution of the noise signal by selecting the control parameter of the PWLCM and using, as a design criterion, the bifurcation diagram.

  7. Role for Distributed Energy Resources (DER) in the Digital Economy

    SciTech Connect (OSTI)

    Key, Thomas S

    2007-11-01

    A large, and growing, part of the Nation's economy either serves or depends upon the information technology industry. These high-tech or "digital" enterprises are characterized by a dependence on electronic devices, need for completely reliable power supply, and intolerance to any power quality problems. In some cases these enterprises are densely populated with electronic loads and have very high energy usage per square foot. Serving these enterprises presents both electric power and equipment cooling challenges. Traditional electric utilities are often hard-pressed to deliver power that meets the stringent requirements of digital customers, and the economic and social consequences of a service quality or reliability problem can be large. New energy delivery and control options must be developed to effectively serve a digital economy. This report explores how distributed energy resources, partnerships between utility and customer to share the responsibility for service quality, innovative facility designs, higher energy efficiencies and waste-heat utilization can be coupled to meet the needs of a growing digital economy.

  8. Transmission of digital images within the NTSC analog format

    DOE Patents [OSTI]

    Nickel, George H.

    2004-06-15

    HDTV and NTSC compatible image communication is done in a single NTSC channel bandwidth. Luminance and chrominance image data of a scene to be transmitted is obtained. The image data is quantized and digitally encoded to form digital image data in HDTV transmission format having low-resolution terms and high-resolution terms. The low-resolution digital image data terms are transformed to a voltage signal corresponding to NTSC color subcarrier modulation with retrace blanking and color bursts to form a NTSC video signal. The NTSC video signal and the high-resolution digital image data terms are then transmitted in a composite NTSC video transmission. In a NTSC receiver, the NTSC video signal is processed directly to display the scene. In a HDTV receiver, the NTSC video signal is processed to invert the color subcarrier modulation to recover the low-resolution terms, where the recovered low-resolution terms are combined with the high-resolution terms to reconstruct the scene in a high definition format.

  9. The Sloan Digital Sky Survey COADD: 275 deg{sup 2} of deep Sloan...

    Office of Scientific and Technical Information (OSTI)

    Title: The Sloan Digital Sky Survey COADD: 275 degsup 2 of deep Sloan Digital Sky Survey imaging on stripe 82 We present details of the construction and characterization of the ...

  10. High-speed digital holography for neutral gas and electron density...

    Office of Scientific and Technical Information (OSTI)

    High-speed digital holography for neutral gas and electron density imaging This content will become publicly available on May 17, 2017 Prev Next Title: High-speed digital ...

  11. PR EPRlNT FUNDAMENTAL CONCEPTS OF DIGITAL IMAGE PROCESSING R...

    Office of Scientific and Technical Information (OSTI)

    ... Englewood Cliffs, NJ: Prentice-Hall, Inc., 1977. 3. Huang, T. S., Picture Processing and Digital Filtering. New York: Springer-Verlag, 1975. 14 4. Pratt, W. K., Digital Image ...

  12. Light Water Reactor Sustainability Program. Digital Architecture Requirements

    SciTech Connect (OSTI)

    Thomas, Kenneth; Oxstrand, Johanna

    2015-03-01

    The Digital Architecture effort is a part of the Department of Energy (DOE) sponsored Light-Water Reactor Sustainability (LWRS) Program conducted at Idaho National Laboratory (INL). The LWRS program is performed in close collaboration with industry research and development (R&D) programs that provides the technical foundations for licensing and managing the long-term, safe, and economical operation of current nuclear power plants (NPPs). One of the primary missions of the LWRS program is to help the U.S. nuclear industry adopt new technologies and engineering solutions that facilitate the continued safe operation of the plants and extension of the current operating licenses. Therefore, a major objective of the LWRS program is the development of a seamless digital environment for plant operations and support by integrating information from plant systems with plant processes for nuclear workers through an array of interconnected technologies. In order to get the most benefits of the advanced technology suggested by the different research activities in the LWRS program, the nuclear utilities need a digital architecture in place to support the technology. A digital architecture can be defined as a collection of information technology (IT) capabilities needed to support and integrate a wide-spectrum of real-time digital capabilities for nuclear power plant performance improvements. It is not hard to imagine that many processes within the plant can be largely improved from both a system and human performance perspective by utilizing a plant wide (or near plant wide) wireless network. For example, a plant wide wireless network allows for real time plant status information to easily be accessed in the control room, field workers’ computer-based procedures can be updated based on the real time plant status, and status on ongoing procedures can be incorporated into smart schedules in the outage command center to allow for more accurate planning of critical tasks. The goal

  13. Department of defense central heating plant operator training and certification program: An overview. Interim report

    SciTech Connect (OSTI)

    Brewer, M.K.; Moshage, R.E.

    1994-11-01

    The variety of equipment found in Department of Defense (DOD) central energy plants (CEPs) and the complexity of these plants demands the CEP operators are highly qualified personnel. Given the serious danger posed by improperly operated boilers, similar operations in the private sector have long maintained processes to establish credentials for their employees. The 1990 Clean Air Act Amendments (CAAA 1990) also recognize the importance of trained and certified fuel plant operators toward improving air quality. As a result of CAAA 1990, the U.S. Environmental Protection Agency (USEPA) will eventually require all operators of boilers with capacities greater than10 million BTU per hour (298 Boiler HP) to be trained and certified. A DOD-wide training and certification program for CEP operators needs to be developed and implemented to increase the safety and reduce the energy and environmental cost of operating central energy plants, and to meet the CAAA 1990 requirements. This study examined the training needs of central energy plant operators at DOD installations to identify the resources required to meet those needs and to assess their effectiveness in the field.

  14. Waste characterization for the F/H Effluent Treatment Facility in support of waste certification

    SciTech Connect (OSTI)

    Brown, D.F.

    1994-10-17

    The Waste Acceptance Criteria (WAC) procedures define the rules concerning packages of solid Low Level Waste (LLW) that are sent to the E-area vaults (EAV). The WACs tabulate the quantities of 22 radionuclides that require manifesting in waste packages destined for each type of vault. These quantities are called the Package Administrative Criteria (PAC). If a waste package exceeds the PAC for any radionuclide in a given vault, then specific permission is needed to send to that vault. To avoid reporting insignificant quantities of the 22 listed radionuclides, the WAC defines the Minimum Reportable Quantity (MRQ) of each radionuclide as 1/1000th of the PAC. If a waste package contains less than the MRQ of a particular radionuclide, then the package`s manifest will list that radionuclide as zero. At least one radionuclide has to be reported, even if all are below the MRQ. The WAC requires that the waste no be ``hazardous`` as defined by SCDHEC/EPA regulations and also lists several miscellaneous physical/chemical requirements for the packages. This report evaluates the solid wastes generated within the F/H Effluent Treatment Facility (ETF) for potential impacts on waste certification.

  15. Status and Trends in U.S. Compliance and Voluntary Renewable Energy Certificate Markets (2010 Data)

    SciTech Connect (OSTI)

    Heeter, J.; Bird, L.

    2011-10-01

    This report documents the status and trends of 'compliance'--renewable energy certificate (REC) markets used to meet state renewable portfolio standard (RPS) requirements--and 'voluntary' markets--those in which consumers and institutions purchase renewable energy to match their electricity needs on a voluntary basis. Today, 29 states and the District of Columbia have an RPS, more than half of all U.S. electricity customers have an option to purchase some type of green power product directly from a retail electricity provider, and all consumers have the option to purchase RECs. This report documents REC activities and trends in the United States. The compliance REC market analysis includes analysis of REC trading, regional REC markets, REC tracking systems, types of compliance RECs, compliance REC pricing trends, and an overview of compliance with RPS polices. The voluntary REC analysis presents data and analysis on voluntary market sales and customer participation, products and premiums, green pricing marketing and administrative expenses, voluntary REC pricing, and the voluntary carbon offsets market. The report concludes with a discussion of upcoming guidance from the Federal Trade Commission on green marketing claims, the emergence of community solar programs, and the potential impact of Dodd-Frank regulations on the REC market.

  16. Role of Renewable Energy Certificates in Developing New Renewable Energy Projects

    SciTech Connect (OSTI)

    Holt, E.; Sumner, J.; Bird, L.

    2011-06-01

    For more than a decade, renewable energy certificates (RECs) have grown in use, becoming a common way to track ownership of the renewable and environmental attributes of renewable electricity generation. In recent years, however, questions have risen about the role RECs play in the decision to build new renewable energy projects. Information from a variety of market participants suggests that the importance of RECs in building new projects varies depending on a number of factors, including electricity market prices, the cost-competitiveness of the project, the presence or absence of public policies supportive of new projects, contract duration, and the perspective of different market participants. While there is no single answer to the role that RECs play, there are situations in which REC revenues are essential to project economics, as well as some where REC revenues may have little impact. To strengthen the role RECs play in both compliance and voluntary markets, there are a number of options that could be considered. In compliance markets, lawmakers or regulators would have to adopt measures that strengthen the role of RECs in the development of new projects, while in voluntary markets, it would be up to program leaders and market participants themselves to implement measures.

  17. Design, fabrication, and certification of advanced modular PV power systems. Final technical progress report

    SciTech Connect (OSTI)

    Lambarski, T.; Minyard, G.

    1998-10-01

    Solar Electric Specialties Company (SES) has completed a two and a half year effort under the auspices of the US Department of Energy (DOE) PVMaT (Photovoltaic Manufacturing Technology) project. Under Phase 4A1 of the project for Product Driven System and Component Technology, the SES contract ``Design, Fabrication and Certification of Advanced Modular PV Power Systems`` had the goal to reduce installed system life cycle costs through development of certified (Underwriters Laboratories or other listing) and standardized prototype products for two of the product lines, MAPPS{trademark} (Modular Autonomous PV Power Supply) and Photogensets{trademark}. MAPPS are small DC systems consisting of Photovoltaic modules, batteries and a charge controller and producing up to about a thousand watt-hours per day. Photogensets are stand-alone AC systems incorporating a generator as backup for the PV in addition to a DC-AC inverter and battery charger. The program tasks for the two-year contract consisted of designing and fabricating prototypes of both a MAPPS and a Photogenset to meet agency listing requirements using modular concepts that would support development of families of products, submitting the prototypes for listing, and performing functionality testing at Sandia and NREL. Both prototypes were candidates for UL (Underwriters Laboratories) listing. The MAPPS was also a candidate for FM (Factory Mutual) approval for hazardous (incendiary gases) locations.

  18. U-017: HP MFP Digital Sending Software Lets Local Users Obtain Potentially Sensitive Information

    Broader source: Energy.gov [DOE]

    A vulnerability was reported in HP MFP Digital Sending Software. A local user can obtain potentially sensitive information.

  19. Interactive display system having a digital micromirror imaging device

    DOE Patents [OSTI]

    Veligdan, James T.; DeSanto, Leonard; Kaull, Lisa; Brewster, Calvin

    2006-04-11

    A display system includes a waveguide optical panel having an inlet face and an opposite outlet face. A projector cooperates with a digital imaging device, e.g. a digital micromirror imaging device, for projecting an image through the panel for display on the outlet face. The imaging device includes an array of mirrors tiltable between opposite display and divert positions. The display positions reflect an image light beam from the projector through the panel for display on the outlet face. The divert positions divert the image light beam away from the panel, and are additionally used for reflecting a probe light beam through the panel toward the outlet face. Covering a spot on the panel, e.g. with a finger, reflects the probe light beam back through the panel toward the inlet face for detection thereat and providing interactive capability.

  20. ANL CT Reconstruction Algorithm for Utilizing Digital X-ray

    Energy Science and Technology Software Center (OSTI)

    2004-05-01

    Reconstructs X-ray computed tomographic images from large data sets known as 16-bit binary sinograms when using a massively parallelized computer architecture such as a Beowuif cluster by parallelizing the X-ray CT reconstruction routine. The algorithm uses the concept of generation of an image from carefully obtained multiple 1-D or 2-D X-ray projections. The individual projections are filtered using a digital Fast Fourier Transform. The literature refers to this as filtered back projection.