National Library of Energy BETA

Sample records for fort bend brazoria

  1. An Archaeological Survey for the Bastille Pipline and Gulag Well Site in Fort Bend County Texas 

    E-Print Network [OSTI]

    Moore, William; Baxter, Edward

    2015-07-28

    An archaeological survey of a proposed natural gas pipeline (2500 feet) and well site (three acres) on the Central Unit of the Texas Department of Criminal Justice in Fort Bend County, Texas was performed by Brazos Valley Research Associates (BVRA...

  2. EIS-0473: W.A. Parish Post-Combustion CO2 Capture and Sequestration Project (PCCS), Fort Bend County, TX

    Broader source: Energy.gov [DOE]

    This EIS evaluates the environmental impacts of a proposal to provide financial assistance for a project proposed by NRG Energy, Inc (NRG). DOE selected NRG’s proposed W.A. Parish Post-Combustion CO2 Capture and Sequestration Project for a financial assistance award through a competitive process under the Clean Coal Power Initiative Program. NRG would design, construct and operate a commercial-scale carbon dioxide (CO2) capture facility at its existing W.A. Parish Generating Station in Fort Bend County, Texas; deliver the CO2 via a new pipeline to the existing West Ranch oil field in Jackson County, Texas, for use in enhanced oil recovery operations; and demonstrate monitoring techniques to verify the permanence of geologic CO2 storage.

  3. EIS-0487: Freeport LNG Liquefaction Project, Brazoria County, Texas

    Broader source: Energy.gov [DOE]

    Federal Energy Regulatory Commission (FERC) prepared an EIS to analyze the potential environmental impacts of a proposal to construct and operate the Freeport Liquefied Natural Gas (LNG) Liquefaction Project, which would expand an existing LNG import terminal and associated facilities in Brazoria County, Texas, to enable the terminal to liquefy and export LNG. DOE, Office of Fossil Energy – a cooperating agency in preparing the EIS – has an obligation under Section 3 of the Natural Gas Act to authorize the import and export of natural gas, including LNG, unless it finds that the import or export is not consistent with the public interest.

  4. An Archaeological Survey for the Scott Number 3 Well in Brazoria County Texas 

    E-Print Network [OSTI]

    Moore, William; Bishop, Phillip; Baxter, Edward

    2015-07-30

    An archaeological survey of a proposed well site on the Retrieve Unit of the Texas Department of Criminal Justice in central Brazoria County, Texas was performed by Brazos Valley Research Associates (BVRA) on October 6, 2009 under antiquities permit...

  5. STRATIRGAPHY AND GEOCHRONOLOGY OF THE VERNOR MAMMOTH SITE, CLUTE, BRAZORIA COUNTY, TEXAS 

    E-Print Network [OSTI]

    Urista, Juan C.

    2010-01-16

    Remains of a mammoth, other Pleistocene fauna, and a wooden bowl were recovered from the Vernor site located in Clute, Brazoria County on the Texas Gulf Coast. Stratigraphy, sedimentology, and geochronology were used to ...

  6. Fort Bragg

    SciTech Connect (OSTI)

    2009-11-01

    This is a combined heat and power (CHP) project profile on a 5 MW combustion turbine at Fort Bragg in North Carolina.

  7. An Archaeological Survey for Suemaur Exploration & Production, LLC's Hoskins Mound-Olympia and Mckinley Prospects Well Pad Sites and Access Roads in Brazoria County Texas 

    E-Print Network [OSTI]

    Moore, William

    2015-07-30

    An archaeological survey of two proposed well pad sites and access roads in the Brazoria National Wildlife Refuge in south Brazoria County, Texas was performed by Brazos Valley Research Associates (BVRA) on February 5, ...

  8. An Archaeological Survey for Suemaur Exploration & Production, LLC's Hoskins Mound-Pocono Prospect Well Pad Site and Access Road in Brazoria County Texas 

    E-Print Network [OSTI]

    Moore, William

    2015-07-30

    An archaeological survey of a proposed well pad site and access road in the Brazoria National Wildlife Refuge in south Brazoria County, Texas was performed by Brazos Valley Research Associates (BVRA) on February 5, 2010. The area investigated...

  9. Fort Belvoir 1988 -2011

    E-Print Network [OSTI]

    US Army Corps of Engineers

    #12;BRAC at Fort Belvoir 1988 - 2011 by Gustav Person Installation Historian U.S. Army Garrison for the Fort Belvoir Garrison, first directed the writing of this history, and provided extensive guidance, the Garrison BRAC Outreach Chief. Mark Strycula, an Installation Volunteer during 2010-2011, and a budding

  10. Fort Bend County, Texas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoopButtePowerEdistoWhiskeyFootprint Ventures Jump to:45Development Strategies

  11. Reversal bending fatigue testing

    DOE Patents [OSTI]

    Wang, Jy-An John; Wang, Hong; Tan, Ting

    2014-10-21

    Embodiments for apparatuses for testing reversal bending fatigue in an elongated beam are disclosed. Embodiments are configured to be coupled to first and second end portions of the beam and to apply a bending moment to the beam and create a pure bending condition in an intermediate portion of the beam. Embodiments are further configured to cyclically alternate the direction of the bending moment applied to the beam such that the intermediate portion of the beam cyclically bends in opposite directions in a pure bending condition.

  12. Nebraska Nuclear Profile - Fort Calhoun

    U.S. Energy Information Administration (EIA) Indexed Site

    Fort Calhoun" "Unit","Summer Capacity (MW)","Net Generation (Thousand MWh)","Summer Capacity Factor (Percent)","Type","Commercial Operation Date","License Expiration Date"...

  13. Water resource opportunity assessment: Fort Dix

    SciTech Connect (OSTI)

    Sullivan, G.P.; Hostick, D.J.; Elliott, D.B.; Fitzpatrick, Q.K.; Dahowski, R.T.; Dison, D.R

    1996-12-01

    This report provides the results of the water resource opportunity assessments performed by Pacific Northwest National Laboratory at the Fort Dix facility located in Fort Dix, New Jersey.

  14. Microhole Tubing Bending Report

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Oglesby, Ken

    2012-01-01

    A downhole tubing bending study was made and is reported herein. IT contains a report and 2 excel spreadsheets to calculate tubing bending and to estimate contact points of the tubing to the drilled hole wall (creating a new support point).

  15. Microhole Tubing Bending Report

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Oglesby, Ken

    A downhole tubing bending study was made and is reported herein. IT contains a report and 2 excel spreadsheets to calculate tubing bending and to estimate contact points of the tubing to the drilled hole wall (creating a new support point).

  16. Bending map and strong convergence

    E-Print Network [OSTI]

    Schlenker, Jean-Marc

    to a * *complete hyperbolic metric associates its bending measured geodesic lamination. In the p* *resent paper Bending map and strong convergence Abstract The bending map of a hyperbolic 3-manifold with boundary maps a geometr* *ically hyper

  17. Fort Polk EEAP. Final report

    SciTech Connect (OSTI)

    Busch, R.D.; Scheuch, K.E.; Shishman, T.T.

    1986-07-17

    This Final Presentation provides a summary of the work done under Increments A, B, E, and G of the Energy Engineering Analysis Program (EEAP) for Fort Polk Louisiana. The work was accomplished under Contract DACA63-80-C-0166 plus modifications with the Fort Worth District, Corps of Engineers. The vast majority of consumed energy at Fort Polk consists of electricity and natural gas. In FY75, Fort Polk used 48,399,000 kWh of electricity at a cost of $600,000. During that same period, 782,637 MCF of natural gas was purchased for $484,000. The total FY75 energy use was 1,368,327 MBtu.

  18. Fort Carson Wind Resource Assessment

    SciTech Connect (OSTI)

    Robichaud, R.

    2012-10-01

    This report focuses on the wind resource assessment, the estimated energy production of wind turbines, and economic potential of a wind turbine project on a ridge in the southeastern portion of the Fort Carson Army base.

  19. Bending map and strong convergence

    E-Print Network [OSTI]

    Schlenker, Jean-Marc

    metric associates its bending measured geodesic lamination. In the present paper, we investigate someBending map and strong convergence Cyril LECUIRE May 2004 Abstract The bending map of a hyperbolic 3-manifold with boundary maps a geometrically hyper- bolic metric to its bending measured geodesic

  20. Environmental assessment of the brine pipeline replacement for the Strategic Petroleum Reserve Bryan Mound Facility in Brazoria County, Texas

    SciTech Connect (OSTI)

    Not Available

    1993-09-01

    The Department of Energy (DOE) has prepared an environmental assessment (EA), DOE/EA-0804, for the proposed replacement of a deteriorated brine disposal pipeline from the Strategic Petroleum Reserve (SPR) Bryan Mound storage facility in Brazoria County, Texas, into the Gulf of Mexico. In addition, the ocean discharge outfall would be moved shoreward by locating the brine diffuser at the end of the pipeline 3.5 miles offshore at a minimum depth of 30 feet. The action would occur in a floodplain and wetlands; therefore, a floodplain/wetlands assessment has been prepared in conjunction with this EA. Based on the analyses in the EA, DOE has determined that the proposed action is not a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act (NEPA) of 1969 (42 USC. 4321, et seg.). Therefore, the preparation of an Environmental Impact Statement (EIS) is not required, and the Department is issuing this Finding of No Significant Impact (FONSI). This FONSI also includes a Floodplain Statement of Findings in accordance with 10 CFR Part 1022.

  1. Louisiana Nuclear Profile - River Bend

    U.S. Energy Information Administration (EIA) Indexed Site

    River Bend" "Unit","Summer capacity (mw)","Net generation (thousand mwh)","Summer capacity factor (percent)","Type","Commercial operation date","License expiration date"...

  2. Cultural resources survey and assessment of the proposed Department of Energy Freeport to Texas City pipeline, Brazoria and Galveston Counties, Texas. Final report

    SciTech Connect (OSTI)

    Castille, G.J.; Whelan, J.P. Jr.

    1986-01-01

    An intensive survey and testing program of selected segments of a proposed Department of Energy pipeline were conducted by Coastal Environments, Inc., Baton Rouge, Louisiana, during December 1985 and January 1986. The proposed pipeline runs from Texas City, Galveston County to Bryan Mound, Brazoria County. The pedestrian survey was preceded by historical records survey to locate possible historic sites within the DOE righ-of-way. Four prehistoric sites within the ROW (41BO159, 160, 161, 162) and one outside the ROW (41BO163) were located. All are Rangia cuneata middens. The survey results are discussed with particular reference to the environmental settings of the sites and the effectiveness of the survey procedure. Two of the sites located within the ROW were subjected to additional testing. The results of the backhoe testing program are included in the site descriptions, and the scientific value of the sites are presented. 52 refs., 20 figs., 10 tabs.

  3. TECHNOLOGICAL FLUENCY THROUGH CIRCUIT BENDING

    E-Print Network [OSTI]

    ;Textbook Handmade Electronic Music Nicolas Collins #12;Circuit Bending Creatively hacking and re-purposing (upcycling?) electronics in the service of making sound ! Hardware Hacking vs. Circuit Bending #12 Toy hacking Oscillators Final project #12;Readings / Context Experimental and electronic music

  4. fort jackson UNIVERSITY OF SOUTH CAROLINA accessible

    E-Print Network [OSTI]

    Almor, Amit

    fort jackson UNIVERSITY OF SOUTH CAROLINA accessible dream choose convenient think form your own at the University of South Carolina Fort Jackson. Our program offers immediate benefits--convenience, flexibility can be applied to a four-year program at South Carolina and are transferable to most other colleges

  5. Fort Boise Veteran's Hospital District Heating Low Temperature...

    Open Energy Info (EERE)

    Fort Boise Veteran's Hospital District Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Fort Boise Veteran's Hospital District Heating Low Temperature...

  6. City of Fort Collins Comment on Information Collection Extension...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2011 City of Fort Collins Comment on Information Collection Extension, October 2011 The City of Fort Collins provided comments to the Department of Energy's notice of intent to...

  7. Passive, achromatic, nearly isochronous bending system

    DOE Patents [OSTI]

    Douglas, David R.; Yunn, Byung C.

    2004-05-18

    A particle beam bending system having a geometry that applies active bending only beyond the chord of the orbit for any momentum component. Using this bending configuration, all momentum components emerge dispersed in position only; all trajectories are parallel by construction. Combining a pair of such bends with reflective symmetry produces a bend cell that is, by construction, achromatic to all orders. By the particular choice of 45.degree. individual bends, a pair of such achromats can be used as the basis of a 180.degree. recirculation arc. Other rational fractions of a full 180.degree. bend serve equally well (e.g., 2 bends/cell.times.90.degree./bend.times.1 cell /arc; 2 bends/cell.times.30.degree./bend.times.3 cells/arc, etc), as do combinations of multiple bending numerologies (e.g., 2 bends/cell.times.22.5.degree./bend.times.2 cells+2 bends/cell.times.45.degree./bend.times.1 cell). By the choice of entry pole face rotation of the first magnet and exit pole face rotation of the second magnet (with a value to be determined from the particular beam stability requirements imposed by the choice of bending angle and beam properties to be used in any particular application), desirable focusing properties can be introduced and beam stability can be insured.

  8. Renewable Energy Opportunities at Fort Hood, Texas

    SciTech Connect (OSTI)

    Solana, Amy E.; Warwick, William M.; Orrell, Alice C.; Russo, Bryan J.; Parker, Kyle R.; Weimar, Mark R.; Horner, Jacob A.; Manning, Anathea

    2011-11-14

    This report presents the results of Pacific Northwest National Laboratory's (PNNL) follow-on renewable energy (RE) assessment of Fort Hood. Fort Hood receives many solicitations from renewable energy vendors who are interested in doing projects on site. Based on specific requests from Fort Hood staff so they can better understand these proposals, and the results of PNNL's 2008 RE assessment of Fort Hood, the following resources were examined in this assessment: (1) Municipal solid waste (MSW) for waste-to-energy (WTE); (2) Wind; (3) Landfill gas; (4) Solar photovoltaics (PV); and (5) Shale gas. This report also examines the regulatory issues, development options, and environmental impacts for the promising RE resources, and includes a review of the RE market in Texas.

  9. Method for uniformly bending conduits

    DOE Patents [OSTI]

    Dekanich, S.J.

    1984-04-27

    The present invention is directed to a method for bending metal tubing through various radii while maintaining uniform cross section of the tubing. The present invention is practical by filling the tubing to a sufficient level with water, freezing the water to ice and bending the ice-filled tubing in a cooled die to the desired radius. The use of the ice as a filler material provides uniform cross-sectional bends of the tubing and upon removal of the ice provides an uncontaminated interior of the tubing which will enable it to be used in its intended application without encountering residual contaminants in the tubing due to the presence of the filler material.

  10. Compaction managed mirror bend achromat

    DOE Patents [OSTI]

    Douglas, David (Yorktown, VA)

    2005-10-18

    A method for controlling the momentum compaction in a beam of charged particles. The method includes a compaction-managed mirror bend achromat (CMMBA) that provides a beamline design that retains the large momentum acceptance of a conventional mirror bend achromat. The CMMBA also provides the ability to tailor the system momentum compaction spectrum as desired for specific applications. The CMMBA enables magnetostatic management of the longitudinal phase space in Energy Recovery Linacs (ERLs) thereby alleviating the need for harmonic linearization of the RF waveform.

  11. Renewable Energy Opportunities at Fort Polk, Louisiana

    SciTech Connect (OSTI)

    Solana, Amy E.; Boyd, Brian K.; Horner, Jacob A.; Gorrissen, Willy J.; Orrell, Alice C.; Weimar, Mark R.; Hand, James R.; Russo, Bryan J.; Williamson, Jennifer L.

    2010-11-17

    This document provides an overview of renewable resource potential at Fort Polk, based primarily upon analysis of secondary data sources supplemented with limited on-site evaluations. This effort focuses on grid-connected generation of electricity from renewable energy sources and also on ground source heat pumps for heating and cooling buildings. The effort was funded by the U.S. Army Installation Management Command (IMCOM) as follow-on to the 2005 Department of Defense (DoD) Renewables Assessment. The site visit to Fort Polk took place on February 16, 2010.

  12. Renewable Energy Opportunities at Fort Sill, Oklahoma

    SciTech Connect (OSTI)

    Boyd, Brian K.; Hand, James R.; Horner, Jacob A.; Orrell, Alice C.; Russo, Bryan J.; Weimar, Mark R.; Nesse, Ronald J.

    2011-03-31

    This document provides an overview of renewable resource potential at Fort Sill, based primarily upon analysis of secondary data sources supplemented with limited on-site evaluations. This effort focuses on grid-connected generation of electricity from renewable energy sources and on ground source heat pumps for heating and cooling buildings. The effort was funded by the U.S. Army Installation Management Command (IMCOM) as follow-on to the 2005 Department of Defense (DoD) Renewables Assessment. The site visit to Fort Sill took place on June 10, 2010.

  13. Fort Bidwell Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View New PagesSustainable Urban Transport JumpFlowood,PevafersaMapFile JumpTestingForseoFortFort

  14. Continuity of the bending map Cyril LECUIRE

    E-Print Network [OSTI]

    Schlenker, Jean-Marc

    Continuity of the bending map Cyril LECUIRE May 2004 Abstract The bending map of a hyperbolic 3-manifold maps a convex cocompact hyperbolic metric on a hyperbolic 3-manifold with boundary to its bending measured geodesic lamination. As proved in [KeS] and [KaT], this map is continuous. In the present paper we

  15. Equilibria for anisotropic bending energies Bennett Palmer

    E-Print Network [OSTI]

    Palmer, Bennett

    Equilibria for anisotropic bending energies Bennett Palmer Department of Mathematics, Idaho State involving an anisotropic bending energy for surfaces. Surfaces with boundary and closed equilibria are discussed. Keywords: plate, bending energy, Willmore functional , anisotropic PACS: 87.16.Dg, 02.40.Hw

  16. Fort Pierce Utilities Authority- Solar Water Heating Rebate

    Office of Energy Efficiency and Renewable Energy (EERE)

    Note: Fort Pierce Utilities Authority has completed its rebate program for 2015. Check the website for updates.

  17. Fort Collins Utilities - Commercial and Industrial Energy Efficiency...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Commercial and Industrial Energy Efficiency Rebate Program Fort Collins Utilities - Commercial and Industrial Energy Efficiency Rebate Program < Back Eligibility Commercial...

  18. 1490 Campus Delivery Fort Collins, Colorado 80523-1490

    E-Print Network [OSTI]

    (s) of employee/team members being nominated: Dr. Charles Allen Work Location: Fort Polk, LA Dr. Allen is the most tireless work in the Botany Program at Fort Polk. Dr. Allen fulfills the requirements set forth he discusses the efforts being made to document the flora of Fort Polk, and by publishing articles

  19. U.S. ARMY GARRISON FORT WAINWRIGHT QUARTERLY UPDATE FOR

    E-Print Network [OSTI]

    U.S. ARMY GARRISON FORT WAINWRIGHT QUARTERLY UPDATE FOR ALASKA NATIVE TRIBES January 2013, Issue 30 This is a quarterly update on United States Army Garrison Fort Wainwright activities and issues of interest); the garrison's Command Sergeant Major American Indian/Alaska Native Heritage Month Observed at Fort Wainwright

  20. Process Optimization Assessments at Fort Leonard Wood, Missouri and Fort Carson, Colorado 

    E-Print Network [OSTI]

    Lin, M.; Vavrin, J.; Smith, W.

    2004-01-01

    Assessments at Fort Leonard Wood, Missouri and Fort Carson, Colorado Mike C.J. Lin U.S. Army Corps of Engineers Engineer Research Development Center, Construction Engineering Research Laboratory Champaign, Illinois John L. Vavrin U.S. Army Corps... a specific Level II scope of work, respective roles, and the most expeditious path forward. This begins with a formal review of this report, combined with a planning session to organize the Level II program. REFERENCES 1. Lin, Mike C.J., et...

  1. Renewable Energy Opportunities at Fort Hood, Texas

    SciTech Connect (OSTI)

    Chvala, William D.; Warwick, William M.; Dixon, Douglas R.; Solana, Amy E.; Weimar, Mark R.; States, Jennifer C.; Reilly, Raymond W.

    2008-06-30

    The document provides an overview of renewable resource potential at Fort Hood based primarily upon analysis of secondary data sources supplemented with limited on-site evaluations. The effort was funded by the U.S. Army Installation Management Command (IMCOM) as follow-on to the 2005 DoD Renewables Assessment. This effort focuses on grid-connected generation of electricity from renewable energy sources and also ground source heat pumps for heating and cooling buildings, as directed by IMCOM.

  2. Fort Bragg Embraces Groundbreaking Heat Pump Technology

    SciTech Connect (OSTI)

    none,

    2013-03-01

    The U.S. Army’s Fort Bragg partnered with the Department of Energy (DOE) to develop and implement solutions to build new, low-energy buildings that are at least 50% below Standard 90.1-2007 of the American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE), the American National Standards Institute (ANSI), and the Illuminating Engineering Society of North America (IESNA) as part of DOE’s Commercial Building Partnerships (CBP) Program.

  3. Cove Fort Geothermal Project | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTIONRobertsdale, Alabama (Utility Company)|Alabama: Energy Resources JumpCove Fort Geothermal

  4. PARTICLE ACCELERATORS; ACCELERATORS; BEAM DUMPS; BENDING; CHANNELING...

    Office of Scientific and Technical Information (OSTI)

    Channeling through Bent Crystals Mack, Stephanie; Ottawa U. SLAC 43 PARTICLE ACCELERATORS; ACCELERATORS; BEAM DUMPS; BENDING; CHANNELING; CRYSTAL LATTICES; DETECTION; FORTRAN;...

  5. Exact map through ideal bends (again?)

    SciTech Connect (OSTI)

    Michelotti, L.

    1995-06-01

    There are three logically independent facets to calculating the transfer map through a bend magnet: physics, geometry, and representation. We will derive the exact map for transit through ideal bends while separating these three, esp., isolating the geometry problem from the other two.

  6. Fort Collins Utilities - Residential and Small Commercial Appliance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Residential and Small Commercial Appliance Rebate Program Fort Collins Utilities - Residential and Small Commercial Appliance Rebate Program < Back Eligibility Residential Savings...

  7. Update On Geothermal Exploration At Fort Bidwell, Surprise Valley...

    Open Energy Info (EERE)

    Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: Update On Geothermal Exploration At Fort Bidwell, Surprise Valley California Abstract A...

  8. Direct-Current Resistivity Survey At Cove Fort Area (Warpinski...

    Open Energy Info (EERE)

    Direct-Current Resistivity Survey At Cove Fort Area (Warpinski, Et Al., 2002) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Direct-Current...

  9. Direct-Current Resistivity Survey At Cove Fort Area - Vapor ...

    Open Energy Info (EERE)

    Direct-Current Resistivity Survey At Cove Fort Area - Vapor (Warpinski, Et Al., 2004) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity:...

  10. Direct-Current Resistivity Survey At Cove Fort Area - Vapor ...

    Open Energy Info (EERE)

    2002) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Direct-Current Resistivity Survey At Cove Fort Area - Vapor (Warpinski, Et Al., 2002)...

  11. Direct-Current Resistivity Survey At Cove Fort Area (Warpinski...

    Open Energy Info (EERE)

    Direct-Current Resistivity Survey At Cove Fort Area (Warpinski, Et Al., 2004) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Direct-Current...

  12. Direct-Current Resistivity At Cove Fort Area - Liquid (Warpinski...

    Open Energy Info (EERE)

    Direct-Current Resistivity At Cove Fort Area - Liquid (Warpinski, Et Al., 2004) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Direct-Current...

  13. SPIDERS Phase 2 Fort Carson Technology Transition Consolidated...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Carson Technology Transition Consolidated Report SPIDERS Phase 2 Fort Carson Technology Transition Consolidated Report Final program public report for phase 2 summarizes the key...

  14. Fort Bidwell Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View New PagesSustainable Urban Transport JumpFlowood,PevafersaMapFile JumpTestingForseoFort

  15. Fort Bliss Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LISTStar2-0057-EA Jump to:ofEnia SpAFlex Fuels EnergyToolFort Bliss Geothermal Area

  16. Fort Loudoun Electric Coop | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LISTStar2-0057-EA Jump to:ofEnia SpAFlex Fuels EnergyToolFort Bliss Geothermal

  17. Fort Pierce Utilities Auth | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LISTStar2-0057-EA Jump to:ofEnia SpAFlex Fuels EnergyToolFort Bliss

  18. Fort Valley Utility Comm | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LISTStar2-0057-EA Jump to:ofEnia SpAFlex Fuels EnergyToolFort BlissUtility Comm Jump

  19. Cove Fort Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTIONRobertsdale, Alabama (Utility Company)|Alabama: Energy Resources JumpCove Fort Geothermal Area

  20. Fort Payne Improvement Auth | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoopButtePowerEdistoWhiskeyFootprint Ventures Jump to:45DevelopmentLauderdale,Fort

  1. A two-mode fiber optic-bending sensor 

    E-Print Network [OSTI]

    Covington, Charles Eric

    1993-01-01

    relating the bending sensitivity to the shape of the profile's asymmetry are discussed. A temperature and strain compensated bending sensor for bending over arbitrary paths is demonstrated as an application of this technology. Some alternate two...

  2. Minimal Bending Energies of Bilayer Polyhedra

    E-Print Network [OSTI]

    Christoph A. Haselwandter; Rob Phillips

    2011-06-10

    Motivated by recent experiments on bilayer polyhedra composed of amphiphilic molecules, we study the elastic bending energies of bilayer vesicles forming polyhedral shapes. Allowing for segregation of excess amphiphiles along the ridges of polyhedra, we find that bilayer polyhedra can indeed have lower bending energies than spherical bilayer vesicles. However, our analysis also implies that, contrary to what has been suggested on the basis of experiments, the snub dodecahedron, rather than the icosahedron, generally represents the energetically favorable shape of bilayer polyhedra.

  3. Brazoria Offshore | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoop IncIowaWisconsin:PontiacInformation Forest Service Climate ChangeOffshore Jump

  4. Fort Collins County State of the Community Report 

    E-Print Network [OSTI]

    Prelog, Rachel; Raza, Fathima; Hamidah, Nur

    2015-01-01

    of bike trails, Fort Collins has earned itself recognition as a Platinum-level Bicycle Friendly Community by the League of American Bicyclists and ranked among the top 10-best cities for bicycling by Bicycle Magazine. The robust bicycle culture is one...-44-88-1212-1616 -19 .43 FORT COLLINS ASIAN POPULATION FIGURE 7 FIGURE 8 State of the community report Pg. 12 Income The residents of Fort Collins enjoy a relatively high quality of life in part to their high earning potential. With a median family income...

  5. Targeting Net Zero Energy at Fort Carson: Assessment and Recommendations

    SciTech Connect (OSTI)

    Anderson, K.; Markel, T.; Simpson, M.; Leahey, J.; Rockenbaugh, C.; Lisell, L.; Burman, K.; Singer, M.

    2011-10-01

    The U.S. Army's Fort Carson installation was selected to serve as a prototype for net zero energy assessment and planning. NREL performed the comprehensive assessment to appraise the potential of Fort Carson to achieve net zero energy status through energy efficiency, renewable energy, and electric vehicle integration. This report summarizes the results of the assessment and provides energy recommendations. This study is part of a larger cross-laboratory effort that also includes an assessment of renewable opportunities at seven other DoD Front Range installations, a microgrid design for Fort Carson critical loads and an assessment of regulatory and market-based barriers to a regional secure smart grid.

  6. A QUANTITATIVE STUDY OF THE VEGETATION SURROUNDING POPULATIONS OF UVULARIA SESSILIFOLIA (LILIACEAE) AT FORT POLK

    E-Print Network [OSTI]

    ) AT FORT POLK IN WEST CENTRAL LOUISIANA, U.S.A. Ariel Dauzart, Charles Allen, Stacy Huskins, and Jacob Delahoussaye Colorado State University, Fort Polk 1645 23rd Street Fort Polk, Louisiana 71459, U.S.A. abstract are reported from Fort Polk in Vernon Parish. Some of these are small with only a few or only one stem

  7. UF Geomatics Fort Lauderdale Research & Education Center (FLREC)

    E-Print Network [OSTI]

    Mazzotti, Frank

    a Geoinformatics student group from Aalto University in Finland. As part of an FSMS Broward Chapter meeting/IFAS Fort Lauderdale Geomatics Research Group with the Poligoni Geoinformatics student delegation from Aalto

  8. Fort Pierce Utilities Authority- Residential Energy Efficiency Rebate Program

    Office of Energy Efficiency and Renewable Energy (EERE)

    Fort Pierce Utilities Authority offers a variety of incentives for their residential customers to save energy in their homes. Rebates are available for room A/C units, insulation upgrades, central...

  9. INDIANA UNIVERSITYPURDUE UNIVERSITY FORT WAYNE INFORMATION TECHNOLOGY SERVICES

    E-Print Network [OSTI]

    Hamburger, Peter

    INDIANA UNIVERSITY­PURDUE UNIVERSITY FORT WAYNE INFORMATION TECHNOLOGY SERVICES Retiree & Emeritus's Authentication and Authorization policy: http://www.purdue.edu/policies/information-technology/viib1.html 1.2. Ethical Guidelines for IPFW Information Technology Users http

  10. Four years of operations and results with FORTE

    SciTech Connect (OSTI)

    Klingner, P. L. (Phillip L.); Carlson, L. D. (Leslie D.); Dingler, R. D. (Robert D.); Esch-Mosher, D. M. (Diana M.); Jacobson, A. R.; Roussel-Dupre, D. (Diane)

    2001-01-01

    The FORTE (Fast Onboard Recording of Transient Events) satellite was launched on 29 August 1997 and has been in continuous operation since that time. FORTE was placed in a nearly circular, 825-km-altitude, 70 degrees inclination orbit by a Pegasus rocket funded by Air Force Space Test Program. The Department of Energy funded the FORTE satellite, which was designed and built at Los Alamos. FORTE's successful launch and engineered robustness were a result of several years of dedicated work by the joint Los Alamos National Laboratory/Sandia National Laboratory project team, led through mission definition, payload and satellite development, and launch by Dr. Stephen Knox. The project is now led by Dr. Abram Jacobson. FORTE carries a suite of instruments, an optical system and a rf system, for the study of lightning and anthropogenic signals. As a result of this effort, new understandings of lightning events have emerged as well as a more complete understanding of the relationship between optical and rf lightning events. This paper will provide an overview of the FORTE satellite and will discuss the on orbit performance of the subsystems.

  11. How paper folds: bending with local constraints

    E-Print Network [OSTI]

    Jemal Guven; Martin Michael Mueller

    2007-12-06

    A variational framework is introduced to describe how a surface bends when it is subject to local constraints on its geometry. This framework is applied to describe the patterns of a folded sheet of paper. The unstretchability of paper implies a constraint on the surface metric; bending is penalized by an energy quadratic in mean curvature. The local Lagrange multipliers enforcing the constraint are identified with a conserved tangential stress that couples to the extrinsic curvature of the sheet. The framework is illustrated by examining the deformation of a flat sheet into a generalized cone.

  12. Community Environmental Response Facilitation Act (CERFA) report. Fort Devens Facility, Fort Devens, Massachusetts. Final report

    SciTech Connect (OSTI)

    Gnewuch, S.

    1994-04-01

    This report presents the results of the Community Environmental Response Facilitation Act (CERFA) investigation conducted by Arthur D. Little, Inc. at Fort Devens, a U.S. Government property selected for closure by the Base Realignment and Closure (BRAC) Commission. The primary objective of this investigation as required under CERFA, is for federal agencies to expeditiously identify real property offering the greatest opportunity for immediate reuse and redevelopment. The property examined under this investigation is a 9,280-acre site located approximately 35 miles northwest of Boston, Massachusetts. Arthur D. Little reviewed existing investigation documents, U.S. Environmental Protection Agency (EPA), state, and county regulatory records, environmental data bases, and title documents pertaining to Fort Devens during this investigation. This information was used to divide the installation into four categories of parcels: CERFA parcels, CERFA parcels with qualifiers, CERFA disqualified parcels, and CERFA excluded parcels. Arthur D. Little's investigation and subsequent parcelization of the installation determined that approximately 2,526 acres of the facility fall within the CERFA parcel category. Approximately 566 acres of the facility were identified as CERFA parcels with qualifiers, approximately 1,305 acres of installation property are identified as CERFA disqualified parcels, and approximately 4,883 areas of the facility were identified as CERFA excluded parcels, essentially the entire South Post.

  13. Modeling of bend discontinuity in plasmonic and spoof plasmonic waveguides

    E-Print Network [OSTI]

    Rahbarihagh, Yaghoob; Shahabadi, Mahmoud

    2015-01-01

    The paper proposes a method to characterize the bend discontinuity for plasmonic and spoof plasmonic waveguides in terms of scattering parameters. By means of this method, the waveguide is modelled by a two-port network and its scattering parameters are extracted. The parameters for the L-shaped sharp curved bends at different frequencies and under different bending angles are determined.

  14. TOPOLOGICAL ASYMPTOTIC ANALYSIS OF THE KIRCHHOFF PLATE BENDING PROBLEM

    E-Print Network [OSTI]

    Samuel, Amstutz

    . The paper is organized as follows. Section 2 describes the model associated to the Kirchhoff plate bendingTOPOLOGICAL ASYMPTOTIC ANALYSIS OF THE KIRCHHOFF PLATE BENDING PROBLEM S. AMSTUTZ AND A.A. NOVOTNY associated to the Kirchhoff plate bending problem, when a circular inclusion is introduced at an arbitrary

  15. Micromechanical Models for Bending Behavior of Woven Composites

    E-Print Network [OSTI]

    Soykasap, Omer

    ; these bundles are not homogenous through the thickness. This paper presents micromechanical models for bending 1). This papers studies bending behavior of plain weave composites. A schematic crossMicromechanical Models for Bending Behavior of Woven Composites ¨O. Soykasap Department

  16. Computer-aided engineering analysis of tooth-bending

    E-Print Network [OSTI]

    Grujicic, Mica

    reliability, Horizontal axis wind turbine, Tooth-bending fatigue failure Paper type Research paper 1Computer-aided engineering analysis of tooth-bending fatigue-based failure in horizontal-axis wind-life of a wind-turbine gearbox in the case when the service-life is controlled by the gear-tooth bending

  17. Fracture of surface cracks loaded in bending

    SciTech Connect (OSTI)

    Chao, Y.J.; Reuter, W.G.

    1997-12-31

    Theoretical background of the constraint effect in brittle fracture of solids is reviewed. Fracture test data from D6-aC, a high strength steel, using three-point-bend (SE(B)) specimens and surface cracked plate (SC(B)) specimens under bending are presented. It is shown that the SE(B) data has an elevated fracture toughness for increasing a/W, i.e., a crack geometry with a larger T/K corresponds to a higher K{sub c} which is consistent with the theoretical prediction. The fundamental fracture properties, i.e., the critical strain and the critical distance, determined from the SE(B) test data are then applied to the interpretation and prediction of the SC(B) test data. Reasonable agreement is achieved for the crack growth initiation site and the load.

  18. Renewable Energy Opportunities at Fort Drum, New York

    SciTech Connect (OSTI)

    Brown, Scott A.; Orrell, Alice C.; Solana, Amy E.; Williamson, Jennifer L.; Hand, James R.; Russo, Bryan J.; Weimar, Mark R.; Rowley, Steven; Nesse, Ronald J.

    2010-10-20

    This document provides an overview of renewable resource potential at Fort Drum, based primarily upon analysis of secondary data sources supplemented with limited on-site evaluations. This effort focuses on grid-connected generation of electricity from renewable energy sources and also on ground source heat pumps for heating and cooling buildings. The effort was funded by the U.S. Army Installation Management Command (IMCOM) as follow-on to the 2005 Department of Defense (DoD) Renewables Assessment. The site visit to Fort Drum took place on May 4 and 5, 2010.

  19. Renewable Energy Opportunities at Fort Campbell, Tennessee/Kentucky

    SciTech Connect (OSTI)

    Hand, James R.; Horner, Jacob A.; Kora, Angela R.; Orrell, Alice C.; Russo, Bryan J.; Weimar, Mark R.; Nesse, Ronald J.

    2011-03-31

    This document provides an overview of renewable resource potential at Fort Campbell, based primarily upon analysis of secondary data sources supplemented with limited on-site evaluations. This effort focuses on grid-connected generation of electricity from renewable energy sources and also on ground source heat pumps for heating and cooling buildings. The effort was funded by the U.S. Army Installation Management Command (IMCOM) as follow-on to the 2005 Department of Defense (DoD) Renewables Assessment. The site visit to Fort Campbell took place on June 10, 2010.

  20. El Paso County Geothermal Project at Fort Bliss

    Office of Energy Efficiency and Renewable Energy (EERE)

    DOE Geothermal Peer Review 2010 - Presentation. Project objective: Determine if, and where, economically viable low temperature geothermal resources might exist in the McGregor test area ?or if necessary at other lesser known sites that exist on the Fort Bliss Military Reservation ?and to determine at what location they can be best accessed without compromising the tactical and strategic missions of Fort Bliss. Determine if identified resources have adequate temperatures and flow rates/volumes to justify development at any scale, with an eye toward the 20 megawatt target identified. Over base need: 45 megawatts.

  1. California’s North Coast Fishing Communities Historical Perspective and Recent Trends: Fort Bragg/Noyo Harbor Fishing Community Profile

    E-Print Network [OSTI]

    Pomeroy, Caroline; Thomson, Cynthia J.; Stevens, Melissa M.

    2011-01-01

    3/29/10. Fort Bragg/Noyo Harbor Fishing Community ProfileFort Bragg/Noyo Harbor Fishing Community Profile Henning.Fort Bragg/Noyo Harbor Fishing Community Profile PSMFC.

  2. Direct-Current Resistivity At Cove Fort Area (Warpinski, Et Al...

    Open Energy Info (EERE)

    Direct-Current Resistivity At Cove Fort Area (Warpinski, Et Al., 2002) (Redirected from Direct-Current Resistivity At Cove Fort Area - Vapor (Warpinski, Et Al., 2002)) Jump to:...

  3. New sensitivity analysis subordinated to a Jean-Claude Fort

    E-Print Network [OSTI]

    Boyer, Edmond

    , Sobol indices Introduction From more than one decade, uncertainty propagation and sensitivity analysisNew sensitivity analysis subordinated to a contrast Jean-Claude Fort , Thierry Klein , Nabil Rachdi May 8, 2013 Abstract In a model of the form Y = h(X1, . . . , Xd) where the goal is to es- timate

  4. 1490 Campus Delivery Fort Collins, Colorado 80523-1490

    E-Print Network [OSTI]

    with local government to modernize water management and prevent pollution. She is an active force in changing to water related natural resource management for the DoD at Fort Wainwright, Alaska. The first program to management and protecting wetlands and waters of the US. It is a major part of the Natural Resources

  5. EIS-0090: Fort Peck-Havre Transmission Line Project, Montana

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy’s Western Area Power Administration prepared this statement to assess the potential environmental and socioeconomic implications of its proposed action to construct and operate a 230kV transmission line from Fort Peck to Havre, Montana, with three intermediate interconnecting substations.

  6. Colorado State University, Fort Collins, CO Weather Station

    E-Print Network [OSTI]

    normal (151% of normal). This remains the 3rd snowiest season (Sept-June) in the 122 year record. The topColorado State University, Fort Collins, CO Weather Station Monthly Summary Report Month: June Year for the month. This ranks as the 29th warmest in the 122 year record (1889-2010). The most recent year

  7. Fort Collins CSU Campus Weather Station Commemoration and Open House

    E-Print Network [OSTI]

    Collett Jr., Jeffrey L.

    Fort Collins CSU Campus Weather Station Commemoration and Open House Please join us in celebrating the fascinating history and important scientific contributions of the Campus Weather Station to Colorado State, July 28, 2014 from 3 - 6 p.m. with remarks at 3:30 p.m. At the Campus Weather Station*** Community Open

  8. Fort Irwin Integrated Resource Assessment. Volume 2, Baseline detail

    SciTech Connect (OSTI)

    Richman, E.E.; Keller, J.M.; Dittmer, A.L.; Hadley, D.L.

    1994-01-01

    This report documents the assessment of baseline energy use at Fort Irwin, a US Army Forces Command facility near Barstow, California. It is a companion report to Volume 1, Executive Summary, and Volume 3, Integrated Resource Assessment. The US Army Forces Command (FORSCOM) has tasked the US Department of Energy (DOE) Federal Energy Management Program (FEMP), supported by the Pacific Northwest Laboratory (PNL), to identify, evaluate, and assist in acquiring all cost-effective energy projects at Fort Irwin. This is part of a model program that PNL has designed to support energy-use decisions in the federal sector. This program (1) identifies and evaluates all cost-effective energy projects; (2) develops a schedule at each installation for project acquisition considering project type, size, timing, and capital requirements, as well as energy and dollar savings; and (3) targets 100% of the financing required to implement energy efficiency projects. PNL applied this model program to Fort Irwin. This analysis examines the characteristics of electric, propane gas, and vehicle fuel use for a typical operating year. It records energy-use intensities for the facilities at Fort Irwin by building type and energy end use. It also breaks down building energy consumption by fuel type, energy end use, and building type. A complete energy consumption reconciliation is presented that accounts for all energy use among buildings, utilities, and applicable losses.

  9. IPFW Student Housing 4110 Crescent Avenue, Fort Wayne, IN 46815

    E-Print Network [OSTI]

    Hamburger, Peter

    IPFW Student Housing 4110 Crescent Avenue, Fort Wayne, IN 46815 T: (260) 481-4180 F: (260) 481 ­ 12 Installments. Complete this form and return it to Student Housing and we will deliver your new Signature: ______________________________ Date: _______ Return this form to the student housing office by e

  10. Proc. FORTE 2015, (c) Springer Sliced Path Prefixes

    E-Print Network [OSTI]

    Beyer, Dirk

    . Proc. FORTE 2015, (c) Springer Sliced Path Prefixes: An Effective Method to Enable Refinement Selection Dirk Beyer, Stefan Löwe, and Philipp Wendler University of Passau, Germany Abstract. Automatic a significant impact on the verification effectiveness and efficiency. 1 Introduction In the field of automatic

  11. Bend, Oregon: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental JumpInformation Beaufort County,BelBelvedere, SouthBend, Oregon: Energy

  12. Bend, Oregon: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental JumpInformation Beaufort County,BelBelvedere, SouthBend, Oregon:

  13. Regional Service Planning for the Coastal Bend 

    E-Print Network [OSTI]

    Coastal Bend Council of Governments

    2006-12-01

    -Type text/plain; charset=ISO-8859-1 ?R?E?G?I?O?N?A?L? ?S?E?R?V?I?C?E? ?P?L?A?N?N?I?N?G ?F?O?R? ?T?H?E? ?C?O?A?S?T?A?L? ?B?E?N?D ?R?e?g?i?o?n?a?l? ?P?u?b?l?i?c? ?T?r?a?n?s?p?o?r?t?a?t?i?o?n ?C?o?o?r?d?i?n?a?t?i?o?n? ?S?t?u?d?y ?w...?w?w?.?r?e?g?i?o?n?a?l?s?e?r?v?i?c?e?p?l?a?n?n?i?n?g?.?o?r?g ?D?e?c?e?m?b?e?r? ?1?,? ?2?0?0?6 Regional Service Planning for the Coastal Bend Regional Public Transportation Coordination Study This study was funded by financial grant from the Texas...

  14. Suppression of microbunching instability using bending magnets in FEL linacs

    E-Print Network [OSTI]

    Qiang, Ji

    2014-01-01

    using bending magnets in FEL linacs Ji Qiang, Chad E.for free electron laser (FEL) radiation. In this letter, weaccelerators for next generation FEL light sources. Instead

  15. Master Environmental Plan: Fort Wingate Depot Activity, Gallup, New Mexico

    SciTech Connect (OSTI)

    Biang, C.A.; Yuen, C.R.; Biang, R.P.; Antonopoulos, A.A.; Ditmars, J.D.

    1990-12-01

    The master environmental plan is based on an environmental assessment of the areas requiring environmental evaluation (AREEs) at Fort Wingate Depot Activity near Gallup, New Mexico. The Fort Wingate Depot Activity is slated for closure under the Base Closure and Realignment Act, Public Law 100--526. The MEP assesses the current status, describes additional data requirements, recommends actions for the sites, and establishes a priority order for actions. The plan was developed so that actions comply with hazardous waste and water quality regulations of the State of New Mexico and applicable federal regulations. It contains a brief history of the site, relevant geological and hydrological information, and a description of the current status for each AREE along with a discussion of the available site-specific data that pertain to existing or potential contamination and the impact on the environment. 35 refs., 27 figs., 23 tabs.

  16. Informal report on measurements of slant TEC by FORTE

    SciTech Connect (OSTI)

    Massey, R.S.

    1997-11-21

    Los Alamos National Laboratory`s Space and Atmospheric Sciences group is now operating the FORTE satellite, which has two sets of instruments: optical detectors and radio detectors. In this report the author describes work with one set of radio detectors that allow measurements of the total electron content (TEC) traversed by VHF radiation originating at an electromagnetic pulse (EMP) generator located at Los Alamos.

  17. FRAMEWORK GEOLOGY OF FORT UNION COAL IN THE WILLISTON BASIN

    E-Print Network [OSTI]

    Chapter WF FRAMEWORK GEOLOGY OF FORT UNION COAL IN THE WILLISTON BASIN By R.M. Flores,1 C.W. Keighin,1 A.M. Ochs,2 P.D. Warwick,1 L.R. Bader,1 and E.C. Murphy3 in U.S. Geological Survey Professional Paper 1625-A 1 U.S. Geological Survey 2 Consultant, U.S. Geological Survey, Denver, Colorado 3 North

  18. Geothermal heat pumps at Fort Polk: Early results

    SciTech Connect (OSTI)

    Hughes, P.J.; Shonder, J.A.

    1996-12-31

    At Fort Polk, LA an entire city (4,003 military family housing units) is being converted to geothermal heat pumps (GHP) under a performance contract. At the same time other efficiency measures such as compact fluorescent lights (CFLs), low-flow water outlets, and attic insulation are being installed. If these contracts and this technology are to be used widely in US Department of Defense (DoD) facilities and other public buildings, better data from actual projects is the key. Being the first GHP project of this type and size, Fort Polk proved to be very challenging for all concerned. To get from RFP to start of construction took several years. This hard work by others created a once-in-a-lifetime opportunity to address many of the due diligence issues that delayed the Fort Polk project. So that future projects can move faster, an evaluation has been undertaken to address the following barriers: absence of a documented large-scale demonstration of GHP energy, demand, and maintenance savings (a barrier to acceptance by federal customers, performance contractors, and investors); newness of large-scale facility capital renewal procurements at federal facilities under energy savings performance contracts (ESPCs) or traditional appropriations (lack of case studies); and variability in current GHP design tools (increases risks and costs for federal customers, performance contractors, investors and designers). This paper presents early energy and demand savings results based on data collection through January 1996.

  19. Statistical mechanics of bend flexoelectricity and the twist-bend phase in bent-core liquid crystals

    E-Print Network [OSTI]

    Shaikh M. Shamid; Subas Dhakal; Jonathan V. Selinger

    2013-05-21

    We develop a Landau theory for bend flexoelectricity in liquid crystals of bent-core molecules. In the nematic phase of the model, the bend flexoelectric coefficient increases as we reduce the temperature toward the nematic to polar phase transition. At this critical point, there is a second order transition from high-temperature uniform nematic phase to low-temperature nonuniform polar phase composed of twist-bend or splay-bend deformations. To test the predictions of Landau theory, we perform Monte Carlo simulations to find the director and polarization configurations as functions of temperature, applied electric field, and interaction parameters.

  20. Bending behavior of general unsymmetric laminates 

    E-Print Network [OSTI]

    Danielson, Kent Thomas

    1987-01-01

    ( ?, ) I + P12[2 ( ? ) (b ) ) + P22(4 (b ) ) 2 2 2 2 2 2 ~ ~ [p [~Sm RRmnR ] p [~Sn Rmncm 1 1 16 2 2 26 2 b2 pq porn q~n 422 qab + p66(" ', b' )H, n- [ ' 2)((-1)' - 1J((-1)n - 1) = p mn~ (38c) where m = l, . . . , ~ and R and S are the same... ng Unsymmetr1c lam1nates exhibit a coupl1ng between membrane strains and curvatures. Th1s "Bending-Stretching Coupl ing" greatly complicates the analysis compared to that of symmetric lam1nates. Currently, unsymmetr1c laminates are used only 1n a...

  1. Structure-borne sound Flexural wave (bending wave)

    E-Print Network [OSTI]

    Berlin,Technische Universität

    1 Structure-borne sound · Flexural wave (bending wave) »One dimensional (beam) +(/x)dx +(/x)dx = (/x) (/x)dx=(2/x2)dx Mz +(Mz/x)dx Mz vy Fy Fy +(Fy/x)dx Structure-borne sound · Bending wave ­ flexural wave #12;2 Structure-borne sound · Two obliquely propagating waves + - + + - + - Structure

  2. Classification of perturbations for membranes with bending 10October 1996

    E-Print Network [OSTI]

    Wiese, Kay Jörg

    EISEVIER Classification of perturbations for membranes with bending 10October 1996 Physics a manifold with van- ishing tension but with bending rigidity. In this case r(x) is the amplitude structure. The goal is to find the eigen- operators of the renormalization-group flow. The paper

  3. Secondary natural gas recovery: Targeted applications for infield reserve growth in midcontinent reservoirs, Boonsville Field, Fort Worth Basin, Texas. Topical report, May 1993--June 1995

    SciTech Connect (OSTI)

    Hardage, B.A.; Carr, D.L.; Finley, R.J.; Tyler, N.; Lancaster, D.E.; Elphick, R.Y.; Ballard, J.R.

    1995-07-01

    The objectives of this project are to define undrained or incompletely drained reservoir compartments controlled primarily by depositional heterogeneity in a low-accommodation, cratonic Midcontinent depositional setting, and, afterwards, to develop and transfer to producers strategies for infield reserve growth of natural gas. Integrated geologic, geophysical, reservoir engineering, and petrophysical evaluations are described in complex difficult-to-characterize fluvial and deltaic reservoirs in Boonsville (Bend Conglomerate Gas) field, a large, mature gas field located in the Fort Worth Basin of North Texas. The purpose of this project is to demonstrate approaches to overcoming the reservoir complexity, targeting the gas resource, and doing so using state-of-the-art technologies being applied by a large cross section of Midcontinent operators.

  4. An Evaluation of the Fort Polk Energy Savings Performance Contract

    SciTech Connect (OSTI)

    Hughes, Patrick; Shonder, John A

    1998-08-01

    The US Army, in cooperation with an energy services company (ESCO), used private capital to retrofit 4003 family housing units on the Fort Polk, Louisiana, military base with geothermal heat pumps (GHPs). The project was performed under an energy savings performance contract (ESPC) that provides for the army and the ESCO to share the cost savings realized through the energy retrofit over the 20-year life of the contract. Under the terms of the contract, the ESCO is responsible for maintaining the GHPs and provides ongoing measurement and verification (M&V) to assure cost and energy savings to the Army. An independent evaluation conducted by the Department of Energy's Oak Ridge National Laboratory indicates that the GHPS systems in combination with other energy retrofit measures have reduced annual whole-community electrical consumption by 33%, and natural gas consumption by 100%. These energy savings correspond to an estimated reduction in CO{sub 2} emissions of 22,400 tons per year. Peak electrical demand has been reduced by 43%. The electrical energy and demand savings correspond to an improvement in the whole-community annual electric load factor from 0.52 to 0.62. As a result of the project, Fort Polk saves about $450,000 annually and benefits from complete renewal of the major energy consuming systems in family housing and maintenance of those systems for 20 years. Given the magnitude of the project, the cost and energy savings achieved, and the lessons learned during its design and implementation, the Fort Polk ESPC can provide a model for other housing-related energy savings performance contracts in both the public and private sectors.

  5. An evaluation of the Fort Polk energy savings performance contract

    SciTech Connect (OSTI)

    Hughes, P.J.; Shonder, J.A.

    1998-11-01

    The US Army, in cooperation with an energy services company (ESCO), used private capital to retrofit 4,003 family housing units on the Fort Polk, Louisiana, military base with geothermal heat pumps (GHPs). The project was performed under an energy savings performance contract (ESPC) that provides for the Army and the ESCO to share the cost savings realized through the energy retrofit over the 20-year life of the contract. Under the terms of the contract, the ESCO is responsible for maintaining the GHPs and provides ongoing measurement and verification (M and V) to assure cost and energy savings to the Army. An independent evaluation conducted by the Department of Energy`s Oak Ridge National Laboratory indicates that the GHP systems in combination with other energy retrofit measures have reduced annual whole-community electrical consumption by 33%, and natural gas consumption by 100%. These energy savings correspond to an estimated reduction in CO{sub 2} emissions of 22,400 tons per year. Peak electrical demand has been reduced by 43%. The electrical energy and demand savings correspond to an improvement in the whole-community annual electric load factor from 0.52 to 0.62. As a result of the project, Fort Polk saves about $450,000 annually and benefits from complete renewal of the major energy consuming systems in family housing and maintenance of those systems for 20 years. Given the magnitude of the project, the cost and energy savings achieved, and the lessons learned during its design and implementation, the Fort Polk ESPC can provide a model for other housing-related energy savings performance contracts in both the public and private sectors.

  6. U.S. Army Fort Knox: Using the Earth for Space Heating and Cooling (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2010-04-01

    FEMP case study overview of the geothermal/ground source heat pump project at the U.S. Army Fort Knox Disney Barracks.

  7. U.S. Army Fort Knox: Using the Earth for Space Heating and Cooling

    SciTech Connect (OSTI)

    2010-04-01

    FEMP case study overview of the geothermal/ground source heat pump project at the U.S. Army Fort Knox Disney Barracks.

  8. Fort Worth, Texas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LISTStar2-0057-EA Jump to:ofEnia SpAFlex Fuels EnergyToolFort BlissUtility Comm

  9. Thermochronometry At Fort Bliss Area (DOE GTP) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to:EA EISTJ AutomationTexas/WindEnergyOpenInformationThermoEnergy03)Fort

  10. Cove Fort Geothermal Power Plant | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTIONRobertsdale, Alabama (Utility Company)|Alabama: Energy Resources JumpCove Fort Geothermal AreaCove

  11. City of Fort Meade, Florida (Utility Company) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmentalBowerbank,CammackFLIRChurchFontanelle, Iowa (Utility Company) Jump to:City of Fort

  12. MHK Projects/Fort Adams | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsource HistoryScenarios Towards 2050 JumpCoos Bay OPT WaveFishers Island TidalFort Adams

  13. MHK Projects/Fort Ross North | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsource HistoryScenarios Towards 2050 JumpCoos Bay OPT WaveFishers Island TidalFort

  14. MHK Projects/Fort Ross South | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsource HistoryScenarios Towards 2050 JumpCoos Bay OPT WaveFishers Island TidalFortSouth

  15. Boralex Fort Fairfield Biomass Facility | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoop IncIowaWisconsin:Pontiac Biomass FacilityBluegrassBoralex Beaver LivermoreFort

  16. Workplace Charging Challenge Partner: City of Fort Collins | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematics And Statistics » USAJobs SearchAMERICA'SEnergy Safely TearEnergyCignaEnergy Fort

  17. Cast-stone sectors for lining bends in pipework

    SciTech Connect (OSTI)

    Chechulin, V.A.; Novikov, A.I.; Karpov, V.M.; Sotnik, A.A.; Sedyshev, B.L.

    1987-03-01

    The authors disclose an efficient method for lining the bends of pipelines used to deliver coal dust to the burners of coal-fired power plants or to transport coal slurries in mining and preparation enterprises. The method consists of melting a wear-resistant silicate compound and casting it in the form of rings whose increased width on the outboard side accounts for the angle of the bend when the rings are installed consecutively inside the pipe. Enhanced service life estimations and cost benefit analyses are given for pipe bends thus lined in both of the above applications.

  18. Strategic Energy Management Plan For Fort Buchanan, Puerto Rico

    SciTech Connect (OSTI)

    Parker, Steven A.; Hunt, W. D.

    2001-10-31

    This document reports findings and recommendations as a result of a design assistance project with Fort Buchanan with the goals of developing a Strategic Energy Management Plan for the Site. A strategy has been developed with three major elements in mind: 1) development of a strong foundation from which to build, 2) understanding technologies that are available, and 3) exploring financing options to fund the implementation of improvements. The objective of this report is to outline a strategy that can be used by Fort Buchanan to further establish an effective energy management program. Once a strategy is accepted, the next step is to take action. Some of the strategies defined in this Plan may be implemented directly. Other strategies may require the development of a more sophisticated tactical, or operational, plan to detail a roadmap that will lead to successful realization of the goal. Similarly, some strategies are not single events. Rather, some strategies will require continuous efforts to maintain diligence or to change the culture of the Base occupants and their efforts to conserve energy resources.

  19. Air Quality and Road Emission Results for Fort Stewart, Georgia

    SciTech Connect (OSTI)

    Kirkham, Randy R.; Driver, Crystal J.; Chamness, Mickie A.; Barfuss, Brad C.

    2004-02-02

    The Directorate of Public Works Environmental & Natural Resources Division (Fort Stewart /Hunter Army Airfield) contracted with the Pacific Northwest National Laboratory (PNNL) to monitor particulate matter (PM) concentrations on Fort Stewart, Georgia. The purpose of this investigation was to establish a PM sampling network using monitoring equipment typically used in U.S. Environmental Protection Agency (EPA) ''saturation sampling'', to determine air quality on the installation. In this initial study, the emphasis was on training-generated PM, not receptor PM loading. The majority of PM samples were 24-hr filter-based samples with sampling frequency ranging from every other day, to once every six days synchronized with the EPA 6th day national sampling schedule. Eight measurement sites were established and used to determine spatial variability in PM concentrations and evaluate whether fluctuations in PM appear to result from training activities and forest management practices on the installation. Data collected to date indicate the average installation PM2.5 concentration is lower than that of nearby urban Savannah, Georgia. At three sites near the installation perimeter, analyses to segregate PM concentrations by direction of air flow across the installation boundary indicate that air (below 80 ft) leaving the installation contains less PM2.5 than that entering the installation. This is reinforced by the observation that air near the ground is cleaner on average than the air at the top of the canopy.

  20. Landform technology at fort polk, louisiana: lessons learned. Final report

    SciTech Connect (OSTI)

    Smith, J.L.; Grafton, J.D.; Mann, D.K.

    1992-03-01

    Fort Polk, LA, is located in central Vernon Parish in West-Central Louisiana, about 6 miles southeast of the town of Leesville. In early 1983, a combination of factors prompted Fort Polk to explore alternatives for disposing of sewage sludge and contaminated soil. Changes in Louisiana's Solid Waste Rules and Regulations ended the practice of disposing of contaminated soil in the installation's landfill. Changing regulations were also affecting the disposal of sewage sludge. The technology investigated in this research is landfarming, a treatment process in which waste is mixed with the surface soil and is degraded, transformed, or immobilized. The surface soil is used as the treatment medium and the process is based primarily on the principle of aerobic decomposition of organic wastes. Compared to other land disposal treatments such as landfills and surface impoundments, landfarming has the potential to reduce monitoring and maintenance costs, as well as cleanup liabilities. Because of these reduced costs and liabilities, and the relatively low initial and operating costs, landfarming has received much attention as an ultimate disposal alternative.

  1. Solar Energy Development Assistance for Fort Hunter Liggett

    SciTech Connect (OSTI)

    Russo, Bryan J.; Hoffman, Michael G.; Chvala, William D.

    2011-03-30

    Pacific Northwest National Laboratory provided assistance to Fort Hunter Liggett to determine the opportunities for solar energy development on the site. Increasing use of renewable energy is mandated by several executive orders and legislation. Fort Hunter Liggett has many attributes that enhance its suitability for renewable energy development. First, the site is located south of San Francisco in a remote portion of the costal foothills. Brush and forest fires are frequent and often result in power outages, which subsequently impacts the site’s training mission. In addition, the site’s blended electric rate during fiscal year (FY) 2010 was high at 12 ¢/kWh. Lastly, the solar resource is moderately high; the site receives nearly 5.7 kWh/m2/day on a south facing, latitude-tilted surface. In light of these factors, the site is a clear candidate for a solar photovoltaic array. Prior to Pacific Northwest National Laboratory’s (PNNL) involvement, the site secured funding for a 1 megawatt (MW) photovoltaic (PV) array that will also provide shading for site vehicles. To best implement this project, PNNL conducted a site visit and was tasked with providing the site technical guidance and support regarding module selection, array siting, and other ancillary issues.

  2. The seasonality of aerosol properties in Big Bend National Park 

    E-Print Network [OSTI]

    Allen, Christopher Lee

    2007-04-25

    ), to characterize the seasonal variability of the Big Bend regions aerosol optical properties. Mass extinction efficiencies and relative humidity scattering enhancement factors were calculated for both externally and internally mixed aerosol populations for all size...

  3. The determination of thru-thickness residual bending stresses 

    E-Print Network [OSTI]

    Rinehart, Adam James

    2000-01-01

    In order to understand the fatigue behavior of dents in pressurized pipelines it is necessary to understand the residual stresses that result from cyclic plastic bending. Three approaches are taken here in studying a beam cross section: a discrete...

  4. Sun Ultra 80 SPEC CFP95 Sun Forte Inter-Array Padding for Data Localization

    E-Print Network [OSTI]

    Kasahara, Hironori

    Sun Ultra 80 SPEC CFP95 Sun Forte 5.5 Inter-Array Padding for Data Localization with Static for data localization to minimize cache conflict misses. In the evaluation on Sun Ultra 80 using SPEC CFP95, the OSCAR multigrain compiler gave us up to 5.5 times speedup against Sun Forte automatic paralleling

  5. Thermal design of the fast-on-orbit recording of transient events (FORTE) satellite

    SciTech Connect (OSTI)

    Akau, R.L.; Behr, V.L.; Whitaker, R.

    1994-10-01

    Analytical tools were used to design a thermal control system for the FORTE satellite. An overall spacecraft thermal model was developed to provide boundary temperatures for detailed thermal models of the FORTE instruments. The thermal design will be presented and thermal model results discussed.

  6. Mechanical characterization of NiTi wires under pure bending G.Antherieu1

    E-Print Network [OSTI]

    Payan, Yohan

    crystallographic states: cold-worked, austenitic and martensitic. Results of a bending test on a steel wire and moment measurement during pure bending tests on steel wires (Figure 1) Bending moment/load measurements.m; the minimum reached radius of curvature was about 1.5cm. Results of a bending test on a steel wire

  7. Bounding the bending of a hyperbolic 3-manifold Martin Bridgeman and Richard D. Canary

    E-Print Network [OSTI]

    Canary, Dick

    , 2015 Abstract In this paper we obtain bounds on the total bending of the boundary of the convex coreBounding the bending of a hyperbolic 3-manifold Martin Bridgeman and Richard D. Canary April 19 the bending lamination. The bending lamination inherits a transverse measure which keeps track of how much

  8. Modeling and Identification of Material Parameters in Coupled Torsion and Bending

    E-Print Network [OSTI]

    coupled torsion and bending. In this paper we present a model (Section 2) for coupled torsion and bending and damping (bending and torsional) in vibration experiments. The model presented in this paper is itself new3 y 3 y Modeling and Identification of Material Parameters in Coupled Torsion and Bending H

  9. Bounding the bending of a hyperbolic 3manifold Martin Bridgeman and Richard D. Canary \\Lambda

    E-Print Network [OSTI]

    Canary, Dick

    September 29, 2002 Abstract In this paper we obtain bounds on the total bending of the boundaryBounding the bending of a hyperbolic 3­manifold Martin Bridgeman and Richard D. Canary \\Lambda, called the bending lamination. The bending lamination inherits a transverse measure which keeps track

  10. Fort Hood solar cogeneration facility conceptual design study

    SciTech Connect (OSTI)

    Not Available

    1981-05-01

    A study is done on the application of a tower-focus solar cogeneration facility at the US Fort Hood Army Base in Killeen, Texas. Solar-heated molten salt is to provide the steam for electricity and for room heating, room cooling, and domestic hot water. The proposed solar cogeneration system is expected to save the equivalent of approximately 10,500 barrels of fuel oil per year and to involve low development risks. The site and existing plant are described, including the climate and plant performance. The selection of the site-specific configuration is discussed, including: candidate system configurations; technology assessments, including risk assessments of system development, receiver fluids, and receiver configurations; system sizing; and the results of trade studies leading to the selection of the preferred system configuration. (LEW)

  11. Landscape influences on headwater streams on Fort Stewart, Georgia, USA

    SciTech Connect (OSTI)

    Jager, Yetta [ORNL; Bevelhimer, Mark S [ORNL; al., et. [Various Institutes

    2011-01-01

    Military landscapes represent a mixture of undisturbed natural ecosystems, developed areas, and lands that support different types and intensities of military training. Research to understand water-quality influences of military landscapes usually involves intensive sampling in a few watersheds. In this study, we developed a survey design of accessible headwater watersheds intended to improve our ability to distinguish land water relationships in general, and training influences, in particular, on Fort Stewart, GA. We sampled and analyzed water from watershed outlets. We successfully developed correlative models for total suspended solids (TSS), total nitrogen (TN), organic carbon (OC), and organic nitrogen (ON), which dominated in this blackwater ecosystem. TSS tended to be greater in samples after rainfall and during the growing season, and models that included %Wetland suggested a build-and-flush relationship. We also detected a positive association between TSS and tank-training, which suggests a need to intercept sediment-laden runoff from training areas. Models for OC showed a negative association with %Grassland. TN and ON both showed negative associations with %Grassland, %Wetland, and %Forest. Unexpected positive associations were observed between OC and equipmenttraining activity and between ON and %Bare ground ? Roads. Future studies that combine our survey-based approach with more intensive monitoring of the timing and intensity of training would be needed to better understand the mechanisms for these empirical relationships involving military training. Looking beyond local effects on Fort Stewart streams, we explore questions about how exports of OC and nitrogen from coastal military installations ultimately influence estuaries downstream.

  12. Case1: Outlet of the pipe without a bend and a weld Case2: Outlet of the pipe with 90/90 bend and 30 weld

    E-Print Network [OSTI]

    McDonald, Kirk

    1 #12;Case1: Outlet of the pipe without a bend and a weld Case2: Outlet of the pipe with 90°/90° bend and 30° weld 2 #12;3 Y X Z symmetry Velocity Inlet Wall Pressure Outlet Wall Normalized by Djet inlet from pipeflow study with a 30° weld out of bend plan, and with a 90°/90° bend. Mesh: 15M. #12;Hg

  13. Electricity Generation from Geothermal Resources on the Fort Peck Reservation in Northeast Montana

    SciTech Connect (OSTI)

    Carlson, Garry J.; Birkby, Jeff

    2015-05-12

    Tribal lands owned by Assiniboine and Sioux Tribes on the Fort Peck Indian Reservation, located in Northeastern Montana, overlie large volumes of deep, hot, saline water. Our study area included all the Fort Peck Reservation occupying roughly 1,456 sq miles. The geothermal water present in the Fort Peck Reservation is located in the western part of the Williston Basin in the Madison Group complex ranging in depths of 5500 to 7500 feet. Although no surface hot springs exist on the Reservation, water temperatures within oil wells that intercept these geothermal resources in the Madison Formation range from 150 to 278 degrees F.

  14. An ozone climatology of the Dallas-Fort Worth area and its relationship to meteorology 

    E-Print Network [OSTI]

    Nobis, Timothy Edward

    1998-01-01

    The Environmental protection agency has established a hics. National Ambient Air Quality Standard for surface ozone through the Clean Air Act and its amendments. The Dallas / Fort Worth area is in violation of these standards, and to date...

  15. Aggregate stability, infiltration, and glomalin in eroded and compacted soils on Fort Hood Military Reservation 

    E-Print Network [OSTI]

    Applewhite, James Kenneth

    2008-10-10

    on soil aggregation, infiltration, and levels of glomalin. A field study was done on plots located inside Fort Hood on a Nuff silty clay (fine-silty, carbonatic, thermic Udic Calciustoll). The plots were amended with composted dairy manure, inorganic...

  16. Assiniboine and Sioux Tribes of the Fort Peck Indian Reservation- 2010 Project

    Broader source: Energy.gov [DOE]

    The feasibility analysis will fully characterize the Fort Peck Reservation’s geothermal resource, as well as examine the economic, technical, environmental, social, and tribal issues involved in developing geothermal resources for electrical generation.

  17. Baseline Report for the Fort Hood Army Base: Sept. 1, 2002 - Aug. 31, 2003 

    E-Print Network [OSTI]

    Haberl, J. S.; Baltazar-Cervantes, J. C.; Liu, Z.; Claridge, D. E.; Turner, W. D.

    2003-01-01

    .................................................................................................................. 28 2.3.5. West Electrical Substation .................................................................................................................. 32 2.3.6. North Fort Hood Substation.......................................................................................................... 38 3.1.1.4. Chiller monitoring ........................................................................................................................... 38 3.1.1.5. Natural gas monitoring...

  18. Building the water edge : a public event for art and artists at Fort Point Channel

    E-Print Network [OSTI]

    Godwin, Audrey

    1996-01-01

    The thesis deals with building the water edge at Fort Point Channel, between Congress Street and Summer Street Bridges. It serves as a public event that intends to establish continuity of movement along the waterfront. The ...

  19. Project Reports for Assiniboine and Sioux Tribes of the Fort Peck Indian Reservation- 2010 Project

    Broader source: Energy.gov [DOE]

    The feasibility analysis will fully characterize the Fort Peck Reservation’s geothermal resource, as well as examine the economic, technical, environmental, social, and tribal issues involved in developing geothermal resources for electrical generation.

  20. Population size and contaminant exposure of bats using caves on Fort Hood Military Base 

    E-Print Network [OSTI]

    Land, Tarisha Ann

    2001-01-01

    Seasonal cave usage patterns were determined in an effort to understand the ecology of a bat colony at Shell Mountain Bat Cave in Fort Hood, Texas. Exit counts were conducted one night each month for 13 consecutive months ...

  1. A SUMMARY OF COAL IN THE FORT UNION FORMATION (TERTIARY), BIGHORN BASIN,

    E-Print Network [OSTI]

    Chapter SB A SUMMARY OF COAL IN THE FORT UNION FORMATION (TERTIARY), BIGHORN BASIN, WYOMING assessment of selected Tertiary coal beds and zones in the Northern RockyMountains and Great Plains region, U...........................................................................................................................SB-1 Coal Production History

  2. Habitat Restoration/Enhancement Fort Hall Reservation : 2008 Annual Report.

    SciTech Connect (OSTI)

    Osborne, Hunter

    2009-07-23

    Habitat enhancement, protection and monitoring were the focus of the Resident Fisheries Program during 2008. Enhancement and protection included sloping, fencing and planting wetlands plugs at sites on Spring Creek (Head-waters). Many previously constructed instream structures (rock barbs and wing dams) were repaired throughout the Fort Hall Indian Reservation (Reservation). Physical sampling during 2008 included sediment and depth measurements (SADMS) in Spring Creek at the Car Removal site. SADMS, used to track changes in channel morphology and specifically track movements of silt through Bottoms stream systems were completed for 5 strata on Spring Creek. Water temperature and chemistry were monitored monthly on Spring Creek, Clear Creek, Diggie Creek, and Portneuf (Jimmy Drinks) and Blackfoot rivers. Fish population densities and biomass were sampled in five reservation streams which included nine sites. Sampling protocols were identical to methods used in past years. Numbers of fish in Spring Creek series remained relatively low, however, there was an increase of biomass overall since 1993. Salmonid fry densities were monitored near Broncho Bridge and were similar to 2006, and 2007, however, as in years past, high densities of macrophytes make it very difficult to see fry in addition to lack of field technicians. Mean catch rate by anglers on Bottoms streams stayed the same as 2007 at 1.5/hr. Numbers of fish larger than 18-inches caught by anglers increased from 2007 at .20 to .26/hr.

  3. Trace fossils of Fort Hays Limestone Member of Niobrara Chalk (Upper Cretaceous), west-central Kansas

    E-Print Network [OSTI]

    Frey, R. W.

    1970-07-17

    THE UNIVERSITY OF KANSAS PALEONTOLOGICAL CONTRIBUTIONS ARTICLE 53 (CRETACEOUS 2) TRACE FOSSILS OF FORT HAYS LIMESTONE MEMBER OF NIOBRARA CHALK (UPPER CRETACEOUS), WEST-CENTRAL KANSAS ROBERT W. FREY University of Georgia Marine Institute, Sapelo... Figures, 10 Plates, 4 Tables TRACE FOSSILS OF FORT HAYS LIMESTONE MEMBER OF NIOBRARA CHALK (UPPER CRETACEOUS), WEST-CENTRAL KANSAS' ROBERT W. FREY University of Georgia Marine Institute, Sapelo Island, Georgia CONTENTS PAGE PAGE ABSTRACT 5 Thalassinoides...

  4. Tension bending ratcheting tests of 304 stainless steel

    SciTech Connect (OSTI)

    Larson, L.D.; Jones, D.P.; Rapp, D.G.

    1996-12-31

    This paper discusses results of an experimental program conducted to investigate the strain ratcheting behavior of 304 stainless steel under various combinations of applied membrane load and displacement controlled cyclic bending strain. Tests were performed on uniaxial specimens at temperatures of 70 F (21 C) and 550 F (288 C). Bending strain, ratchet strain and axial displacement of the specimens were monitored throughout the tests. Membrane stress to monotonic yield stress ratios of 2/3, 1/2, and 1/3 were tested with pseudo-elastic bending stress to yield stress ratios ranging from 1.4 to 10.7. Test output was in the form of plots of cumulative axial membrane strain versus cycles up to the point of shakedown, i.e., the point at which no additional progressive strain was observed. Shakedown was demonstrated in the 500 F tests but not the room temperature tests. The 550 F results are shown in terms of shakedown membrane strain versus equivalent bending stress ratio for each of the tested membrane stress ratios. The cyclic and monotonic stress-strain curves for the test materials are presented to enable the use of various models for predicting the ratcheting and shakedown behavior. The results may be used to develop improved ratcheting and shakedown rules permitting a relaxation of the traditional ratcheting rules in the ASME Boiler and Pressure Vessel Code.

  5. Flexpad: Highly Flexible Bending Interactions for Projected Handheld Displays

    E-Print Network [OSTI]

    Flexpad: Highly Flexible Bending Interactions for Projected Handheld Displays Jürgen Steimle MIT of plain paper or foam into flexible, highly deformable, and spatially aware handheld displays. We present application examples: curved cross-cuts in volumetric images, deforming virtual paper characters, and slicing

  6. Bending Waves in Flattened Stellar Systems a Department of Mathematics

    E-Print Network [OSTI]

    Bending Waves in Flattened Stellar Systems a C. Hunter Department of Mathematics Florida State the explanation of galactic warps, that is the topic of this paper. Massive dark halos may very well play a major supported in part by National Science Foundation Grant DMS­9304012. This paper is based on an invited talk

  7. The Clinch Bend Regional Industrial Site and economic development opportunities

    SciTech Connect (OSTI)

    1995-12-31

    This effort focuses initially on the Clinch Bend site. Other sites and developable tracts of land are identified with the assistance of communities in proximity to Oak Ridge, the State of Tennessee, and others, and compared with the projected site requirements for large industrial facilities.

  8. Experimental estimation of dynamic plastic bending moments by plastic hinge models

    SciTech Connect (OSTI)

    Sogo, T.; Ujihashi, S.; Matsumoto, H.; Adachi, T.

    1995-12-31

    In the present paper, the experimental estimation of dynamic plastic bending moments for metallic materials is investigated. The three-point bending, test under impact and static loads is applied to aluminum alloy (JIS A6063S) and mild steel (JIS SS400). It is confirmed that tile dynamic bending deformations in three-point bending test can be modeled as a plastic hinge, tile experimental results show that the consumed energies of the specimens are proportional to the bending angles. The ratio of the consumed energy to the bending angle is approximately equal to the plastic bending moment. In the case of aluminum alloy, the dynamic plastic bending moments for the different average bending angular velocities coincide with the static plastic bending moments. On the other hand, in the case of mild steel, the dynamic plastic bending moments are proportional to the average bending angular velocities. As a result, we confirm that the present method based on the plastic hinge model and the consumed energy is efficient for determining tile dynamic plastic bending moment.

  9. The influence of return bends on the downstream pressure drop and condensation heat transfer in tubes

    E-Print Network [OSTI]

    Traviss, Donald P.

    1971-01-01

    The influence of return bends on the downstream pressure drop and heat transfer coefficient of condensing refrigerant R-12 was studied experimentally. Flow patterns in glass return bends of 1/2 to 1 in. radius and 0.315 ...

  10. Numerical and experimental investigation of laser induced tube bending Wenchuan Li andY. Lawrence Yao

    E-Print Network [OSTI]

    Yao, Y. Lawrence

    normally requires repeated annealing when mechanical bending is used. Silve, et a!. investigated procedures for laser bending ofsquare cross-section tubes ofmild steel1 · Different scanning sequences were compared

  11. Characterization of bending stiffness and spontaneous buckling of alpha-helices and coiled coils 

    E-Print Network [OSTI]

    Lakkaraju, Sirish Kaushik

    2009-05-15

    Elasticity of ?-helices and coiled coils have often been described by a linear response to local bending with bending stiffness (Kb) and persistence length (Lp) describing their flexibility. However, we observed that the non-bonded forces along...

  12. 2255 Management Way, Fort Collins, CO Addy.Visor@business.colostate.edu 555-444-2222 Colorado State University, Fort Collins, CO 3.83 GPA

    E-Print Network [OSTI]

    responsibilities while balancing a full course load and internship Rocket Launch Project Manager Intern May 20XXAddy Visor 2255 Management Way, Fort Collins, CO · Addy.Visor@business.colostate.edu · 555 Administration May 20XX Concentrations in Management & Corporate Finance *Dean's List All Semesters RELATED

  13. Quantization of bending deformations of polygons , hypergeometric integrals and the Gassner

    E-Print Network [OSTI]

    Millson, John

    bending Hamiltonians. 1 #12;The point of this paper is to compute the representation ^ ;r : Pn ! Aut(T ;rQuantization of bending deformations of polygons in E 3 , hypergeometric integrals and the Gassner of the bending deformations of n-gons in E3 studied in KM] and Kly] give rise to a Hamiltonian action

  14. Bending Burning Matches and Crumpling Burning Paper Texas A&M University

    E-Print Network [OSTI]

    Keyser, John

    Bending Burning Matches and Crumpling Burning Paper Zeki Melek Texas A&M University Department burning. Specifically, we can simulate the bending of burning matches, and the folding of burning paper objects. Examples include the upward bending seen in burning matches and the crumpling of burning paper

  15. A fast multipole boundary element method for solving the thin plate bending problem

    E-Print Network [OSTI]

    Liu, Yijun

    in this paper. The method is based on the Kirchhoff thin plate bending theory and the biharmonic equationA fast multipole boundary element method for solving the thin plate bending problem S. Huang, Y: Fast multipole method Boundary element method Thin plate bending problem a b s t r a c t A fast

  16. Mechanics-Based Modeling of Bending and Torsion in Active Cannulas

    E-Print Network [OSTI]

    transmissions. In this paper, we consider both bending and torsion, describing the total elastic energy storedMechanics-Based Modeling of Bending and Torsion in Active Cannulas D. Caleb Rucker, and Robert J cannula more accurately than previous models, reducing tip error by 72% over a bending-only model, and 35

  17. Quantization of bending deformations of polygons 3 , hypergeometric integrals and the Gassner

    E-Print Network [OSTI]

    Millson, John

    of all bending Hamiltonians. 1 #12; The point of this paper is to compute the representation â?? ae fflQuantization of bending deformations of polygons in E 3 , hypergeometric integrals and the Gassner of the bending deformations of n­gons in E 3 studied in [KM] and [Kly] give rise to a Hamiltonian action

  18. The peeling behavior of thin films with finite bending stiffness and the implications on gecko adhesion

    E-Print Network [OSTI]

    . This paper assesses the influence of the bending stiffness on thin film peeling and argues that detailedThe peeling behavior of thin films with finite bending stiffness and the implications on gecko the bending stiffness of the spatula has a strong influence on the peeling force which is neglected

  19. Macromolecules 1994,27,981-988 981 Bending and Twisting Elasticity of DNA

    E-Print Network [OSTI]

    Siggia, Eric

    to bending persistence, persistence of internal twisting degrees of f r e e d ~ m . ~ ~ ~In this paper, weMacromolecules 1994,27,981-988 981 Bending and Twisting Elasticity of DNA J. F.Marko' and E to the independentbendingandtorsionalenergiesincorporatedin previoustheories,apreviouslyunknowncoupling between twist and bend. If the backbone is given

  20. Slow convergence of the BEM with constant elements in solving beam bending problems

    E-Print Network [OSTI]

    Liu, Yijun

    beam bending problems. This paper presents some BEM results with large-scale 2D models of simple beamSlow convergence of the BEM with constant elements in solving beam bending problems Y.J. Liu n , Y online 13 November 2013 Keywords: Boundary element method Constant element Beam bending problem a b s t r

  1. Modified Theis equation by considering the bending effect of the confining unit

    E-Print Network [OSTI]

    Jiao, Jiu Jimmy

    . This paper investigated the impact of the bending effect of the confining unit on drawdown. An analyticalModified Theis equation by considering the bending effect of the confining unit Xu Sheng Wang a rigidity and therefore may bend like a plate to a certain extent. The increase in the effective stress

  2. Guiding, bending, and splitting of electromagnetic waves in highly confined photonic crystal waveguides

    E-Print Network [OSTI]

    , they have not reported any optical measurements on this sharp-bend structure.16 In this paper, weGuiding, bending, and splitting of electromagnetic waves in highly confined photonic crystal experimentally demonstrated the guiding, bending, and splitting of electromagnetic EM waves in highly confined

  3. Facet bending in the driven crystalline curvature flow in the plane

    E-Print Network [OSTI]

    Ikegami, Takashi

    Facet bending in the driven crystalline curvature flow in the plane Yoshikazu Giga1 , Piotr Rybka2, then they begin to bend. Key words: singular energies, bending of facets, driven curvature flow, variational prin- clidean curvature. In this paper we are interested in the case when is not C1, for example

  4. MHK Projects/Vicksburg Bend | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsource HistoryScenarios Towards 2050 JumpCoosSlough Bend

  5. 9/4/2014 NEWS OF THE WEIRD | Fort Myers Newspaper | News, Business, Real Estate and Arts in Fort Myers FL | Florida http://fortmyers.floridaweekly.com/news/2014-08-27/News_of_The_Weird/NEWS_OF_THE_WEIRD.html?print=1 1/3

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    9/4/2014 NEWS OF THE WEIRD | Fort Myers Newspaper | News, Business, Real Estate and Arts in Fort's the story? 13 Points Mentioned #12;9/4/2014 NEWS OF THE WEIRD | Fort Myers Newspaper | News, Business, Real Estate and Arts in Fort Myers FL | Florida http://fortmyers.floridaweekly.com/news/2014-08-27/News

  6. Bending light on demand by holographic sculpturing its wavefront

    E-Print Network [OSTI]

    Latychevskaia, Tatiana

    2015-01-01

    A classical light beam propagates along a straight line and does not bend unless in a medium of variable refractive index. It is well known that by modifying the wavefront in a certain manner, the light intensity can be turned into a certain shape. Examples are optical lenses or Fresnel Zone Plates for focusing an incident wave to a point at the focal plane. Another example are Airy beams created by modifying the phase distribution of the wavefront into an Airy function resulting in a bending of the light intensity while propagating. A further example is holography, where the phase of the wavefront passing through a hologram is changed to mimic the object wavefront, thus providing the illusion that the original object is present in space. However, all these known techniques allow for limited light modifications: either focusing within a limited region in space2 or shaping a certain class of parametric curves along the optical axis or creating a bend in a quadratic-dependent declination as in the case of Airy ...

  7. Control of Prestressing Force in Rod for Reducing Bending in Beams

    SciTech Connect (OSTI)

    Wong, M. B.

    2010-05-21

    This paper presents a method to determine the prestressing force required in a rod for reducing the bending effects in a beam. The rod is positioned underneath the beam such that the prestressing force is counteracting the effects of beam bending. It has been found that the prestressing force may also increase the bending as a result of P-delta effect. Therefore, the choice of both the prestressing force and the rod eccentricity from the beam axis is important in determining the appropriate actions to resist the bending of the beam. Over-prestressing the rod may even induce bending or buckling failure in the beam in the reverse direction.

  8. Fort Smith, mother post of the southwest quartermaster supply and archeological patterning 

    E-Print Network [OSTI]

    Bento, Sylvia Deborah

    1988-01-01

    the supplies and haul them to Fort Smith. This process was extremely time consuming and expensive. When steamers attempted to ride the low water they would often collide with floating debris and become stranded. The steamer New World was stuck 10 miles... below Pine Bluff ? Arkansas? for six months (NcClel land 18'55) . Unable to get the vessel out of the r iver & the For t Smith quartermaster, then Captain French& knew that a way had to be found to get the stores from the steamer to Fort Smith...

  9. Energy engineering analysis program, Fort Polk, Louisiana. Pre-final executive summary, increment `f`

    SciTech Connect (OSTI)

    1987-11-01

    Executive Order 12003, dated 19 July 1977, initiated the U.S. Army`s energy conservation effort. Specifically, the Executive Order led to the development of the Army Facilities Energy Plan which directs Army Staff and Major Army Commands to develop detailed implementation plans for energy conservation. As a result of these directives, the Fort Worth District of the U.S. Army Corps of Engineers contracted for an Energy Engineering Analysis Program (EEAP) at Fort Polk, Louisiana. The EEAP included Increments `A`, `B`, `E`, and `O`.

  10. Fort Collins, Colorado on Track to Net Zero | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12, 2015ExecutiveFluorescent LampFort Collins, Colorado on Track to Net Zero Fort

  11. Design and optimization of a high-efficiency nanoscale 90 light-bending structure by mode selection and tailoring

    E-Print Network [OSTI]

    Chau, Kenneth

    before and after the bend. In this paper, we design a nanoscale light-bending struc- ture capable of 90Design and optimization of a high-efficiency nanoscale 90° light-bending structure by mode of a nanoscale structure to enable 90° visible light-bending. The geometry and constituent materials

  12. Demonstration of high waveguide bending efficiency (>90%) in a photonic-crystal slab at 1.5m wavelengths

    E-Print Network [OSTI]

    -crystal waveguide bend. In this paper, we reported the first quantitative experimental study of bending efficiency in a photonic crystal waveguide bend at =1.5µm. The paper is structured as follows. In the first part. In the second part of paper, we report the quantitative analysis of bending efficiency in a photonic- crystal

  13. Reversible Bending Fatigue Testing on Zry-4 Surrogate Rods

    SciTech Connect (OSTI)

    Wang, Jy-An John; Wang, Hong; Bevard, Bruce Balkcom; Howard, Rob L

    2014-01-01

    Testing high-burnup spent nuclear fuel (SNF) presents many challenges in areas such as specimen preparation, specimen installation, mechanical loading, load control, measurements, data acquisition, and specimen disposal because these tasks are complicated by the radioactivity of the test specimens. Research and comparison studies conducted at Oak Ridge National Laboratory (ORNL) resulted in a new concept in 2010 for a U-frame testing setup on which to perform hot-cell reversible bending fatigue testing. Subsequently, the three-dimensional finite element analysis and the engineering design of components were completed. In 2013 the ORNL team finalized the upgrade of the U-frame testing setup and the integration of the U-frame setup into a Bose dual linear motor test bench to develop a cyclic integrated reversible-bending fatigue tester (CIRFT). A final check was conducted on the CIRFT test system in August 2013, and the CIRFT was installed in the hot cell in September 2013 to evaluate both the static and dynamic mechanical response of SNF rods under simulated loads. The fatigue responses of Zircaloy-4 (Zry-4) cladding and the role of pellet pellet and pellet clad interactions are critical to SNF vibration integrity, but such data are not available due to the unavailability of an effective testing system. While the deployment of the developed CIRFT test system in a hot cell will provide the opportunity to generate the data, the use of a surrogate rod has proven quite effective in identifying the underlying deformation mechanism of an SNF composite rod under an equivalent loading condition. This paper presents the experimental results of using surrogate rods under CIRFT reversible cyclic loading. Specifically, monotonic and cyclic bending tests were conducted on surrogate rods made of a Zry-4 tube and alumina pellet inserts, both with and without an epoxy bond.

  14. Ice plug employed on subsea pipeline bend during repair

    SciTech Connect (OSTI)

    1997-12-22

    The first controlled-temperature ice plug in the bend of an offshore gas trunkline has been carried out for Phillips Petroleum Co. Norway on its Norpipe A.S. platform in the German sector of the North Sea. The procedure was part of a subsea valve repair operation. The ice plug was successfully formed offshore and tested to a differential pressure of 1,450 psi. Repair of two valves required only 5 days during which time gas production was operating at close to 50--60% via the platform bypass, says the service company. The paper discusses the procedure.

  15. Particle deposition in ventilation ducts: Connectors, bends anddeveloping flow

    SciTech Connect (OSTI)

    Sippola, Mark R.; Nazaroff, William W.

    2004-03-01

    In ventilation duct flow the turbulent flow profile is commonly disturbed or not fully developed and these conditions are likely to influence particle deposition to duct surfaces. Particle deposition rates at eight S-connectors, in two 90{sup o} duct bends and in two ducts where the turbulent flow profile was not fully developed were measured in a laboratory duct system with both galvanized steel and internally insulated ducts with hydraulic diameters of 15.2 cm. In the steel duct system, experiments with nominal particle diameters of 1, 3, 5, 9 and 16 {micro}m were conducted at each of three nominal air speeds: 2.2, 5.3 and 9.0 m/s. In the insulated duct system, deposition of particles with nominal diameters of 1, 3, 5, 8 and 13 {micro}m was measured at nominal air speeds of 2.2, 5.3 and 8.8 m/s. Fluorescent techniques were used to directly measure the deposition velocities of monodisperse fluorescent particles to duct surfaces. Deposition at S-connectors, in bends and in straight ducts with developing turbulence was often greater than deposition in straight ducts with fully developed turbulence for equal particle sizes, air speeds and duct surface orientations. Deposition rates at all locations were found to increase with an increase in particle size or air speed. High deposition rates at S-connectors resulted from impaction and these rates were nearly independent of the orientation of the S-connector. Deposition rates in the two 90{sup o} bends differed by more than an order of magnitude in some cases, probably because of the difference in turbulence conditions at the bend inlets. In straight steel ducts where the turbulent flow profile was developing, the deposition enhancement relative to fully developed turbulence generally increased with air speed and decreased with downstream distance from the duct inlet. This enhancement was greater at the duct ceiling and wall than at the duct floor. In insulated ducts, deposition enhancement was less pronounced overall than in steel ducts. Trends that were observed in steel ducts were present, but weaker, in insulated ducts.

  16. MHK Projects/Walker Bend Project | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View NewTexas:Montezuma,Information MHKMHK5 < MHKKembla < MHK Projects2Walker Bend

  17. Big Bend, Wisconsin: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental JumpInformation BeaufortBentMichigan:Greece) JumpGeorgia: EnergyEnergyBend,

  18. MHK Projects/Cow Island Bend | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsource HistoryScenarios Towards 2050 JumpCoos Bay OPT Wave Park < MHKIsland Bend <

  19. MHK Projects/New Madrid Bend Project | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsource HistoryScenarios Towards 2050 JumpCoos Bay OPTHalf|Myette PointMadrid Bend Project

  20. MHK Projects/Newton Bend Project | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsource HistoryScenarios Towards 2050 JumpCoos Bay OPTHalf|Myette PointMadrid Bend2Newton

  1. MHK Projects/Slough Bend | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsource HistoryScenarios Towards 2050 JumpCoosSlough Bend < MHK Projects Jump to:

  2. MHK Projects/Springfield Bend | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsource HistoryScenarios Towards 2050 JumpCoosSlough Bend < MHK Projects

  3. MHK Projects/St Rose Bend | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsource HistoryScenarios Towards 2050 JumpCoosSlough Bend < MHK ProjectsSt Clair

  4. Big Bend Hot Springs Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoop IncIowaWisconsin: EnergyYorkColoradoBelcher HomesBeverly,Lake, California:Big Bend

  5. Transworld Research Network 37/661 (2), Fort P.O., Trivandrum-695 023, Kerala, India

    E-Print Network [OSTI]

    Movileanu, Liviu

    Transworld Research Network 37/661 (2), Fort P.O., Trivandrum-695 023, Kerala, India Recent Res. Devel. Biophys., 3(2004): 61-86 ISBN: 81-7895-130-4 4 The birth, life and death of statistical pores

  6. Fort Meade demonstration test LEDS in freezer rooms, fiber optics in display cases

    SciTech Connect (OSTI)

    Parker, Steven; Parker, Graham B.

    2008-10-25

    Demonstration projects at Fort George G. Meade, MD, substituted LED lighting for incandescent bulbs in commisary wal-in freezers and fiber optic lighting in reach-in display cases. The goal was to reduce energy consumption and the results were positive. Journal article published in Public Works Digest

  7. EA-1922: Combined Power and Biomass Heating System, Fort Yukon, Alaska

    Broader source: Energy.gov [DOE]

    DOE (lead agency), Denali Commission (cooperating agency) and USDA Rural Utilities Services (cooperating agency) are proposing to provide funding to support the final design and construction of a biomass combined heat and power plant and associated district heating system to the Council of Athabascan Tribal Governments and the Gwitchyaa Zhee Corporation. The proposed biomass district heating system would be located in Fort Yukon Alaska.

  8. Hydrogen bonding in solid ammonia from ab initio calculations A. D. Fortes,a)

    E-Print Network [OSTI]

    Vocadlo, Lidunka

    Hydrogen bonding in solid ammonia from ab initio calculations A. D. Fortes,a) J. P. Brodholt, I. G the tendency toward symmetrization of the hydrogen bonds at high pressures and find that, unlike pure ice that ammonia IV does not contain a bifurcated hydrogen bond, as has previously been suggested. © 2003 American

  9. EIS-0069: Solvent Refined Coal-II Demonstration Project, Fort Martin, Monongalia County, West Virginia

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy developed this statement to assess the potential environmental, economic and social impacts associated with the construction and short-term operation of a 6,000-tons-per-stream-day-capacity facility that will demonstrate the technical operability, economic viability, and environmental acceptability of the solvent refined coal process at Fort Martin, West Virginia.

  10. Completing pseudojump operators R. Coles, R. Downey, C. Jockusch, and G. LaForte

    E-Print Network [OSTI]

    Completing pseudojump operators R. Coles, R. Downey, C. Jockusch, and G. LaForte June 29, 2006 which can be completed to the jump by given c.e. operators. 1 Introduction The most natural example theorem, Theorem 3.1 of [3], is a completion result for pseudojump operators, asserting that for any index

  11. Community Environmental Response Facilitation Act (CERFA) report. Fort Des Moines, Des Moines, Iowa. Final report

    SciTech Connect (OSTI)

    Young, B.; Rausch, K.; Kang, J.

    1994-04-01

    This report presents the results of the Community Environmental Response Facilitation Act (CERFA) investigation conducted by The Earth Technology Corporation (TETC) at the Fort Des Moines, a U.S. Government property selected for closure by the Base Realignment and Closure (BRAC) Commission. Under CERFA Federal agencies are required to identify real property that can be immediately reused and redeveloped. Satisfying this objective requires the identification of real property where no hazardous substances or petroleum products, regulated by the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), were stored for one year or more, known to have been released, or disposed. Fort Des Moines is a 53.28-acre site located in Polk County, Iowa, within the city limits of Des Moines. The installation's primary mission is to provide support and shelter for the U.S. Army Reserve. Activities associated with the property that have environmental significance are photographic processing, vehicle maintenance, printing, and fuel storage. TETC reviewed existing investigation documents; U.S. Environmental Protection Agency (USEPA), State, and county regulatory records; environmental data bases; and title documents pertaining to Fort Des Moines during this investigation. In addition, TETC conducted interviews and visual inspections of Fort Des Moines as well as visual inspections and data base searches for the surrounding properties. Information in this CERFA Report was current as of April 1994.

  12. CSU's Atmospheric Science 50th Anniversary Fort Collins, CO, July 2012

    E-Print Network [OSTI]

    Collett Jr., Jeffrey L.

    Climate Change Science Thomas C. Peterson NOAA's National Climatic Data Center Asheville, North Carolina's National Climatic Data Center #12;CSU's Atmospheric Science 50th Anniversary Fort Collins, CO, July 2012 4 NOAA's National Climatic Data Center What it is not · Not the latest research ­ For that see the July

  13. Transworld Research Network 37/661 (2), Fort P.O., Trivandrum-695 023, Kerala, India

    E-Print Network [OSTI]

    Kaiser, Ralf I.

    Transworld Research Network 37/661 (2), Fort P.O., Trivandrum-695 023, Kerala, India Gas Phase sequential addition steps of ground-state atomic carbon, carbon molecules (C2 and C3) and small hydrocarbon of aromatic fuels. Thus, understanding of the C2 reactions with unsaturated hydrocarbons should be helpful

  14. FRAMEWORK GEOLOGY OF FORT UNION COAL IN THE EASTERN ROCK SPRINGS UPLIFT,

    E-Print Network [OSTI]

    Chapter GF FRAMEWORK GEOLOGY OF FORT UNION COAL IN THE EASTERN ROCK SPRINGS UPLIFT, GREATER GREEN RIVER BASIN, WYOMING By R.M. Flores,1 A.M. Ochs,2 and L.R. Bader1 in U.S. Geological Survey Professional Paper 1625-A 1 U.S. Geological Survey 2 Consultant, U.S. Geological Survey, Denver, Colorado 1999

  15. FORT UNION COAL IN THE POWDER RIVER BASIN, WYOMING AND MONTANA: A SYNTHESIS

    E-Print Network [OSTI]

    Chapter PS FORT UNION COAL IN THE POWDER RIVER BASIN, WYOMING AND MONTANA: A SYNTHESIS By R of selected Tertiary coal beds and zones in the Northern RockyMountains and Great Plains region, U Resource assessment of selected Tertiary coal beds and zones in the Northern Rocky Mountains and Great

  16. FORT UNION COAL IN THE GREATER GREEN RIVER BASIN, EAST FLANK OF THE ROCK SPRINGS UPLIFT,

    E-Print Network [OSTI]

    Chapter GS FORT UNION COAL IN THE GREATER GREEN RIVER BASIN, EAST FLANK OF THE ROCK SPRINGS UPLIFT 1999 Resource assessment of selected Tertiary coal beds and zones in the Northern Rocky in the toolbar to return. 1999 Resource assessment of selected Tertiary coal beds and zones in the Northern Rocky

  17. Finite element residual stress analysis of induction heating bended ferritic steel piping

    SciTech Connect (OSTI)

    Kima, Jong Sung; Kim, Kyoung-Soo; Oh, Young-Jin; Chang, Hyung-Young; Park, Heung-Bae

    2014-10-06

    Recently, there is a trend to apply the piping bended by induction heating process to nuclear power plants. Residual stress can be generated due to thermo-mechanical mechanism during the induction heating bending process. It is well-known that the residual stress has important effect on crack initiation and growth. The previous studies have focused on the thickness variation. In part, some studies were performed for residual stress evaluation of the austenitic stainless steel piping bended by induction heating. It is difficult to find the residual stresses of the ferritic steel piping bended by the induction heating. The study assessed the residual stresses of induction heating bended ferriticsteel piping via finite element analysis. As a result, it was identified that high residual stresses are generated on local outersurface region of the induction heating bended ferritic piping.

  18. Analytical quantitative description of wide plate U-free bend process of intelligent control

    E-Print Network [OSTI]

    Su, Chun-jian; Guo, Su-min

    2013-01-01

    According to flexure theory of plate, on the premise of plane deformation assumption, an analytic model of U-free bend theory is proposed in this paper, which considered the harden, anisotropy and elastic deformation of material. Then the theoretical analysis on U-free bending of wide plate is made, the change rules of bending force with bending stroke and formula of target angularity are obtained, the various factors affecting bending force and rebound are analyzed. Furthermore, theoretical calculation and experiment and simulation results are compared, which provided theoretical basis for identifying parameters of the wide plate U-free bending intelligent control as well as determining variables of the input layer and output layer of prediction model.

  19. Extreme bendability of DNA double helix due to bending asymmetry

    E-Print Network [OSTI]

    Hossein Salari; B. Eslami-Mossallam; M. S. Naderi; M. R. Ejtehadi

    2015-05-23

    Experimental data of the DNA cyclization (J-factor) at short length scales, as a way to study the elastic behavior of tightly bent DNA, exceed the theoretical expectation based on the wormlike chain (WLC) model by several orders of magnitude. Here, we propose that asymmetric bending rigidity of the double helix in the groove direction can be responsible for extreme bendability of DNA at short length scales and it also facilitates DNA loop formation at these lengths. To account for the bending asymmetry, we consider the asymmetric elastic rod (AER) model which has been introduced and parametrized in an earlier study (B. Eslami-Mossallam and M. Ejtehadi, Phys. Rev. E 80, 011919 (2009)). Exploiting a coarse grained representation of DNA molecule at base pair (bp) level, and using the Monte Carlo simulation method in combination with the umbrella sampling technique, we calculate the loop formation probability of DNA in the AER model. We show that, for DNA molecule has a larger J-factor compared to the WLC model which is in excellent agreement with recent experimental data.

  20. Experiments and analyses on undermatched interleaf specimens in bending

    SciTech Connect (OSTI)

    Parks, D.M.; Ganti, S.; McClintock, F.A.; Epstein, J.S.; Lloyd, L.R.; Reuter, W.G.

    1995-12-31

    Model weldment fracture specimens have been fabricated, tested, and analyzed using finite elements. The specimens consist of an interleaf of commercially pure titanium diffusion-bonded to a harder alloy titanium. A deep edge crack is introduced symmetrically into the interleaf, and the specimens are loaded in pure bending. Variation of the thickness (2h) of the soft interleaf layer provides insight into effects of weld geometry in strongly undermatched weldments tested in plane strain bending. Ductile crack growth (beyond blunting) initiated at loads giving J {doteq} 95 kJ/m{sup 2} in all specimens. In the thickest interleaf geometries, stable tearing was obtained, but in the thinnest interleaf (2h {doteq} 3mm), crack initiation resulted in a massive pop-in of 5.4 mm across an initial ligament of 12 mm. Finite element studies show that the thinnest interleaf geometry had slightly higher peak stress triaxiality at the beginning of cracking, and that the highest triaxiality extended over a larger region than in the thicker interleaf specimens loaded to the same initiation J-values. More importantly, the blockage of plastic straining above and below the crack tip in the 3 mm interleaf specimen forced higher values of plastic strain to spread forward into the {+-} 45{degree} sector of highest stress triaxiality directly ahead of the crack tip. The higher strains, in conjunction with the slightly higher stress triaxiality, led to the unstable pop-in initiation.

  1. Extreme bendability of DNA double helix due to bending asymmetry

    E-Print Network [OSTI]

    Salari, Hossein; Naderi, M S; Ejtehadi, M R

    2015-01-01

    Experimental data of the DNA cyclization (J-factor) at short length scales, as a way to study the elastic behavior of tightly bent DNA, exceed the theoretical expectation based on the wormlike chain (WLC) model by several orders of magnitude. Here, we propose that asymmetric bending rigidity of the double helix in the groove direction can be responsible for extreme bendability of DNA at short length scales and it also facilitates DNA loop formation at these lengths. To account for the bending asymmetry, we consider the asymmetric elastic rod (AER) model which has been introduced and parametrized in an earlier study (B. Eslami-Mossallam and M. Ejtehadi, Phys. Rev. E 80, 011919 (2009)). Exploiting a coarse grained representation of DNA molecule at base pair (bp) level, and using the Monte Carlo simulation method in combination with the umbrella sampling technique, we calculate the loop formation probability of DNA in the AER model. We show that, for DNA molecule has a larger J-factor compared to the WLC model w...

  2. Ultrafast dynamics of liquid water: Frequency fluctuations of the OH stretch and the HOH bend

    SciTech Connect (OSTI)

    Imoto, Sho; Xantheas, Sotiris S.; Saito, Shinji

    2013-07-28

    Frequency fluctuations of the OH stretch and the HOH bend in liquid water are reported from the third-order response function evaluated using the TTM3-F potential for water. The simulated two-dimensional infrared (IR) spectra of the OH stretch are similar to previously reported theoretical results. The present study suggests that the frequency fluctuation of the HOH bend is faster than that of the OH stretch. The ultrafast loss of the frequency correlation of the HOH bend is due to the strong couplings with the OH stretch as well as the intermolecular hydrogen bond bend.

  3. A Superconducting Bending Magnet System for a Compact Synchrotron Light Source

    E-Print Network [OSTI]

    Green, M.A.

    2011-01-01

    Garren, "Optimization of Superconducting Bending Magnets foral, "Development of a Superconducting Compact Storage Ringsdesigns M. A Green, "Superconducting Dipole Magnets for

  4. Could Gila Bend, Arizona, Become the Solar Capital of the World?

    Broader source: Energy.gov [DOE]

    Serving approximately 9,000 homes with clean renewable energy, the Paloma and Cotton Center solar plants highlight the rapidly rising solar corridor in Gila Bend, Arizona.

  5. Twist-bend instability for toroidal DNA condensates

    E-Print Network [OSTI]

    Igor M. Kulic; Denis Andrienko; Markus Deserno

    2003-12-08

    We propose that semiflexible polymers in poor solvent collapse in two stages. The first stage is the well known formation of a dense toroidal aggregate. However, if the solvent is sufficiently poor, the condensate will undergo a second structural transition to a twisted entangled state, in which individual filaments lower their bending energy by additionally orbiting around the mean path along which they wind. This ``topological ripening'' is consistent with known simulations and experimental results. It connects and rationalizes various experimental observations ranging from strong DNA entanglement in viral capsids to the unusually short pitch of the cholesteric phase of DNA in sperm-heads. We propose that topological ripening of DNA toroids could improve the efficiency and stability of gene delivery.

  6. Unsteady laminar flow and convective heat transfer in a sharp 180 bend

    E-Print Network [OSTI]

    Chung, Yongmann M.

    Unsteady laminar flow and convective heat transfer in a sharp 180° bend Yongmann M. Chung a , Paul Unsteady laminar flow and heat transfer in a sharp 180° bend is studied numerically to investigate to be strong. Ó 2002 Elsevier Science Inc. All rights reserved. Keywords: Laminar; Unsteady; Heat transfer

  7. Carbon emissions in China: How far can new efforts bend the curve?

    E-Print Network [OSTI]

    Carbon emissions in China: How far can new efforts bend the curve? Xiliang Zhang, Valerie J future; and improve methods to model, monitor and verify greenhouse gas emissions and climatic impacts emissions in China: How far can new efforts bend the curve? Xiliang Zhang§* , Valerie J. Karplus , Tianyu Qi

  8. Improved bends for two-dimensional photonic crystal , Ya Yan Lu b

    E-Print Network [OSTI]

    Lu, Ya Yan

    is a three-dimensional (3D) structure with a 2D periodicity. Typically, it is a dielectric slab. Keywords: Optical waveguides, photonic crystal waveguides, waveguide bends, optimal design, numerical material to realize such waveguide bends. Mekis et al. [2] first theoretically demonstrated high

  9. A POSTERIORI ERROR ANALYSIS OF THE LINKED INTERPOLATION TECHNIQUE FOR PLATE BENDING PROBLEMS

    E-Print Network [OSTI]

    Lovadina, Carlo

    A POSTERIORI ERROR ANALYSIS OF THE LINKED INTERPOLATION TECHNIQUE FOR PLATE BENDING PROBLEMS CARLO Interpolation Tech- nique' to approximate the solution of plate bending problems. We show that the proposed. 1. Introduction. In this paper we present an a posteriori error analysis for the so-called `Linked

  10. Bending stiffness calculation for nanosize structures E. A. IVANOVA, A. M. KRIVTSOV and N. F. MOROZOV

    E-Print Network [OSTI]

    Krivtsov, Anton M.

    Bending stiffness calculation for nanosize structures E. A. IVANOVA, A. M. KRIVTSOV and N. F of corrections taking into account the scale effects. The presented paper is devoted to theoretical investigation of the influence of the scale effects on the bending stiffness of a nanocrystal, which is extended in one direction

  11. Structural Stability of Carbon Nanotube Films: The Role of Bending Buckling

    E-Print Network [OSTI]

    Zhigilei, Leonid V.

    Structural Stability of Carbon Nanotube Films: The Role of Bending Buckling Alexey N. Volkov treatment of CNT materials.22 In this paper we report the results of a computa- tional investigation self-assembly of CNTs into continuous networks of bundles and reveal that the bending buckling

  12. LOCKING-FREE FINITE ELEMENT METHOD FOR A BENDING MOMENT FORMULATION OF TIMOSHENKO BEAMS

    E-Print Network [OSTI]

    Rodríguez, Rodolfo

    LOCKING-FREE FINITE ELEMENT METHOD FOR A BENDING MOMENT FORMULATION OF TIMOSHENKO BEAMS FELIPE LEPE, DAVID MORA, AND RODOLFO RODR´IGUEZ Abstract. In this paper we study a finite element formulation of the transverse displacement, rota- tion, shear stress and bending moment. By using the classical Babuska

  13. FL43CH19-Shelley ARI 10 September 2010 19:30 Flapping and Bending Bodies

    E-Print Network [OSTI]

    Shelley, Michael

    FL43CH19-Shelley ARI 10 September 2010 19:30 R E V I E W S IN A D V A N CE Flapping and Bending, flutter, flexible bodies, instability, drag reduction Abstract The flapping or bending of a flexible is important to applications such as paper processing (Watanabe et al. 2002), as well as to possible approaches

  14. High-Temperature Infrared Measurements in the Region of the Bending Fundamental of H12

    E-Print Network [OSTI]

    Quapp, Wolfgang

    High-Temperature Infrared Measurements in the Region of the Bending Fundamental of H12 C14 N, H12 C allowed us to measure the bending vibrational levels up to the 0 1111 0 state, at more than 7900 cm 1 in this paper and in a recent paper on deuterated isotopomers. © 2000 Academic Press Key Words: HCN; bond

  15. FINITE ELEMENT ANALYSIS OF A BENDING MOMENT FORMULATION FOR THE VIBRATION PROBLEM OF A

    E-Print Network [OSTI]

    Rodríguez, Rodolfo

    FINITE ELEMENT ANALYSIS OF A BENDING MOMENT FORMULATION FOR THE VIBRATION PROBLEM OF A NON-HOMOGENEOUS TIMOSHENKO BEAM FELIPE LEPE, DAVID MORA, AND RODOLFO RODR´IGUEZ Abstract. In this paper we analyze a low-homogeneous Timoshenko beam. We consider a formulation in which the bending moment is introduced as an additional unknown

  16. Bending tests of carbon nanotube thin-film transistors on flexible Daniel Pham1

    E-Print Network [OSTI]

    Chen, Ray

    Bending tests of carbon nanotube thin-film transistors on flexible substrate Daniel Pham1 , Harish, San Marcos, TX 78666. ABSTRACT Bending tests of carbon nanotube thin-film transistors on flexible substrate have been characterized in this paper. The device channel consisting of dense, aligned, 99% pure

  17. Bulging and bending of Kelvin-Helmholtz billows controlled by symmetry and phase of initial perturbation

    E-Print Network [OSTI]

    Gelfgat, Alexander

    Bulging and bending of Kelvin-Helmholtz billows controlled by symmetry and phase of initial or oblique initial wave, the resulting instability can set in as a spanwise bending or bulging of a two-dimensional instabilities. 1. Introduction The present paper is devoted to study of secondary three

  18. Modeling and Bayesian parameter estimation for shape memory alloy bending actuators

    E-Print Network [OSTI]

    . In this paper we employ a computationally efficient model for a SMA bending actuator. Furthermore, we utilizeModeling and Bayesian parameter estimation for shape memory alloy bending actuators John H. Crewsa Carolina State University, Raleigh, NC, United States ABSTRACT In this paper, we employ a homogenized

  19. EFFECT OF MOISTURE ON BENDING AND BREAKING RESISTANCE (IF COMMERCIAL ORIENTED STRANDBOARDS1

    E-Print Network [OSTI]

    ) ABSTRACT This is ZI short addendum to an earlier paper (Wu and Suchsland 1997) on bending resistance (E.1EFFECT OF MOISTURE ON BENDING AND BREAKING RESISTANCE (IF COMMERCIAL ORIENTED STRANDBOARDS1 Qinglin the quality and performance of OSB. In an F ) ~ ~ ~ ~ ~ ~ ~ ~Wu and Suchsland However, the paper did

  20. Bending and Twisting of Suspended Single-Walled Carbon Nanotubes in

    E-Print Network [OSTI]

    Wikswo, John

    Bending and Twisting of Suspended Single-Walled Carbon Nanotubes in Solution Ya-Qiong Xu, Arthur-stranded DNA. By analyzing their thermal fluctuations, we are able to obtain the torsional and bending manipulate nanotubes by molecular-scale forces. In this paper, we present the first measurement

  1. Stability Analysis of the Immersed Boundary Method for a Two-dimensional Membrane with Bending Rigidity

    E-Print Network [OSTI]

    Huang, Huaxiong

    Stability Analysis of the Immersed Boundary Method for a Two-dimensional Membrane with Bending Rigidity Zhaoxin Gong1 , Huaxiong Huang1,2 and Chuanjing Lu1 Abstract: In this paper, we analyse with bending rigidity. The smoothed version, using a standard regularization technique for the singular force

  2. CONVERGENCE OF NUMERICAL APPROXIMATIONS TO A PHASE FIELD BENDING ELASTICITY MODEL OF

    E-Print Network [OSTI]

    CONVERGENCE OF NUMERICAL APPROXIMATIONS TO A PHASE FIELD BENDING ELASTICITY MODEL OF MEMBRANE, Number 1, Pages 1­18 CONVERGENCE OF NUMERICAL APPROXIMATIONS TO A PHASE FIELD BENDING ELASTICITY MODEL OF MEMBRANE DEFORMATIONS QIANG DU AND XIAOQIANG WANG This paper is dedicated to Prof.Max Gunzburger

  3. Light's Bending Angle due to Black Holes: From the Photon Sphere to Infinity

    E-Print Network [OSTI]

    Savitri V. Iyer; Arlie O. Petters

    2007-03-15

    The bending angle of light is a central quantity in the theory of gravitational lensing. We develop an analytical perturbation framework for calculating the bending angle of light rays lensed by a Schwarzschild black hole. Using a perturbation parameter given in terms of the gravitational radius of the black hole and the light ray's impact parameter, we determine an invariant series for the strong-deflection bending angle that extends beyond the standard logarithmic deflection term used in the literature. In the process, we discovered an improvement to the standard logarithmic deflection term. Our perturbation framework is also used to derive as a consistency check, the recently found weak deflection bending angle series. We also reformulate the latter series in terms of a more natural invariant perturbation parameter, one that smoothly transitions between the weak and strong deflection series. We then compare our invariant strong deflection bending-angle series with the numerically integrated exact formal bending angle expression, and find less than 1% discrepancy for light rays as far out as twice the critical impact parameter. The paper concludes by showing that the strong and weak deflection bending angle series together provide an approximation that is within 1% of the exact bending angle value for light rays traversing anywhere between the photon sphere and infinity.

  4. M i l i u m The Bending of Plates of Dissimilar

    E-Print Network [OSTI]

    M i l i u m The Bending of Plates of Dissimilar Materials Willi Cracks1 M. L. WILLIAMS.2 The authors are to be commended for com- pleting an analysis of the companion bending problem for a cracked. In the extensional paper [5), it was pointed out. that, there were two sets of (complex) solutions corre- sponding

  5. ROBUST BDDC PRECONDITIONERS FOR REISSNER-MINDLIN PLATE BENDING PROBLEMS AND MITC ELEMENTS

    E-Print Network [OSTI]

    Lovadina, Carlo

    ROBUST BDDC PRECONDITIONERS FOR REISSNER-MINDLIN PLATE BENDING PROBLEMS AND MITC ELEMENTS L. BEIR Method by Constraints (BDDC) is constructed and analyzed for the Reissner-Mindlin plate bending problem. The main results of the paper are the proof and numerical verification that the proposed BDDC plate

  6. Mechanics of Bending, Torsion, and Variable Precurvature in Multi-Tube Active Cannulas

    E-Print Network [OSTI]

    Mechanics of Bending, Torsion, and Variable Precurvature in Multi-Tube Active Cannulas D. Caleb by their use of preshaped tubes that transmit bending moments as they slide within one an- other. In this paper we consider the general case of an arbitrary number of component tubes and precurvatures that vary

  7. Predicting the ultimate bending capacity of concrete beams from the ``relaxation ratio'' analysis of AE signals

    E-Print Network [OSTI]

    Predicting the ultimate bending capacity of concrete beams from the ``relaxation ratio'' analysis Available online 26 July 2005 Abstract This paper presents an alternative approach to the problem, based the unloading and loading phases of a cycle test and it showed a clear correlation with the bending failure load

  8. Oregon Lake Watch Program Training Sunday -June 22, 2014 from noon to 6 pm -Bend, OR

    E-Print Network [OSTI]

    : Downtown Bend Library, 601 NW Wall St. Bend, OR (between NW Kansas Ave and NW Louisiana Ave) head upstairs to the Hutchinson Room. Free parking is available in parking lots directly east and south of the library Notes - Water Quality monitoring o Description of types of data we will collect o Collection protocols o

  9. HIV-1 Fusion Peptide Decreases Bending Energy and Promotes Curved Fusion Intermediates

    E-Print Network [OSTI]

    Nagle, John F.

    HIV-1 Fusion Peptide Decreases Bending Energy and Promotes Curved Fusion Intermediates Stephanie in human immunodeficiency virus (HIV) infection is fusion between the viral envelope and the T x-ray scattering is that the bending modulus KC is greatly reduced upon addition of the HIV fusion

  10. Transformation optofluidics for large-angle light bending and tuning{{ L. K. Chin,a

    E-Print Network [OSTI]

    Zheludev, Nikolay

    Transformation optofluidics for large-angle light bending and tuning{{ Y. Yang,*a L. K. Chin,a J. M DOI: 10.1039/c2lc40442g Transformation optics is a new art of light bending by designing materials with spatially variable parameters for developing wave-manipulation devices. Here, we introduce a transformation

  11. POWER SUPPLIES FOR THE BENDING MAGNETS OF THE BEP AND VEPP-2000 STORAGE RING

    E-Print Network [OSTI]

    Kozak, Victor R.

    to the control computer. Particularities of the supply design do not allow realizing complete symmetry of powerPOWER SUPPLIES FOR THE BENDING MAGNETS OF THE BEP AND VEPP-2000 STORAGE RING K.M. Gorchakov, S new complex VEPP-2000. The two new power supply for bending magnet was built for BEP and VEPP-2000

  12. Bending Creep Test to Measure the Viscosity of Porous Materials during Sintering

    E-Print Network [OSTI]

    Messing, Gary L.

    Bending Creep Test to Measure the Viscosity of Porous Materials during Sintering Sang-Ho Lee creep test is proposed for measuring the change in viscosity of a porous material during densification be measured. Experiments with porous Y2O3-stabilized ZrO2 beams were used to illustrate the bending creep test

  13. Towards photonic integrated circuits : design and fabrication of passive InP waveguide bends

    E-Print Network [OSTI]

    Rodriguez, Sarah J. (Sarah Janelle), 1979-

    2004-01-01

    Waveguide bends, in the (In,Ga)(As,P) material system, have been simulated, fabricated and tested. A process is developed for waveguides of 1 [micro]m through 7[micro]m widths. Waveguides containing S-bends of varying ...

  14. Site inspection addendum. Fort Meade feasibility study and remedial investigation/site inspection Fort George G. Meade, Maryland. Revision 1. Final report

    SciTech Connect (OSTI)

    NONE

    1995-12-01

    This Site Inspection Addendum Report has been prepared to address the Site Inspection portion of the Feasibility Study (FS) and Remedial Investigation/Site Inspection (RI/SI) activities at Fort George G. Meade. It has been prepared under Delivery Order No. 009 and a Change Order dated July 15, 1993, for the U.S. Army Environmental Center (USAEC), formerly known as the U.S. Army Toxic and Hazardous Materials Agency (USATHAMA). This report fulfills the requirements of deliverable ELIN A004 under Delivery Order 0009 of the Total Environmental Program Support (TEPS) contract DAAAl5-91-D-00l6. The purpose of this Site Inspection Addendum (SIA) report is to report the findings of Arthur D. Little`s SIA investigation. The overall purpose of an SI is to evaluate if chemical releases or potential contamination has occurred at suspected sites and to determine if further investigation is warranted. This study is an addendum to a previous SI and addresses data gaps remaining from or identified in that document. Six sites at Fort George G. Meade (FGGM) are included in the SIA: DPDO Salvage Yard and Transform Storage Area; DPDO Salvage Yard and Transformer Storage Area; Fire Training Area; Helicopter Hangar Area; Inactive Landfill No. 2, Ordnance Demolition Area Soldiers Lake.

  15. Energy Engineering Analysis Program - Fort Polk, Louisiana. Executive summary. Final report

    SciTech Connect (OSTI)

    1986-03-01

    The CRS Group, Inc. is pleased to submit this Final Report covering Increments A, B, E, and G of the Energy Engineering Analysis Program (EEAP) for Fort Polk, Louisiana work accomplished under Contract DACA63-80-C-0166 plus modifications with the Fort Worth District, Corps of Engineers. The work presented in these volumes presents the results in which 32 energy conserving measures (ECM`s) have been investigated for ECIP potential for Increments A (existing buildings including Family Housing) and B (existing utilities and energy distribution systems and a centralized Energy Monitoring and Control System-EMCS). Additionally, five scenarios for implementation of a Central Energy Plant (CEP) were studied under Increment E and an analysis of using waste POL as a fuel source in three scenarios was made. Four projects were analyzed under Increment G to identify additional energy savings.

  16. Isotope effect in normal-to-local transition of acetylene bending modes

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Ma, Jianyi; Xu, Dingguo; Guo, Hua; Tyng, Vivian; Kellman, Michael E.

    2012-01-01

    The normal-to-local transition for the bending modes of acetylene is considered a prelude to its isomerization to vinylidene. Here, such a transition in fully deuterated acetylene is investigated using a full-dimensional quantum model. It is found that the local benders emerge at much lower energies and bending quantum numbers than in the hydrogen isotopomer HCCH. This is accompanied by a transition to a second kind of bending mode called counter-rotator, again at lower energies and quantum numbers than in HCCH. These transitions are also investigated using bifurcation analysis of two empirical spectroscopic fitting Hamiltonians for pure bending modes, which helpsmore »to understand the origin of the transitions semiclassically as branchings or bifurcations out of the trans and normal bend modes when the latter become dynamically unstable. The results of the quantum model and the empirical bifurcation analysis are in very good agreement.« less

  17. The Effect of Element Formulation on the Prediction of Boost Effects in Numerical Tube Bending

    SciTech Connect (OSTI)

    Bardelcik, A.; Worswick, M.J.

    2005-08-05

    This paper presents advanced FE models of the pre-bending process to investigate the effect of element formulation on the prediction of boost effects in tube bending. Tube bending experiments are conducted with 3'' (OD) IF (Interstitial-Free) steel tube on a fully instrumented Eagle EPT-75 servo-hydraulic mandrel-rotary draw tube bender. Experiments were performed in which the bending boost was varied at three levels and resulted in consistent trends in the strain and thickness distribution within the pre-bent tubes. A numerical model of the rotary draw tube bender was used to simulate pre-bending of the IF tube with the three levels of boost from the experiments. To examine the effect of element formulation on the prediction of boost, the tube was modeled with shell and solid elements. Both models predicted the overall strain and thickness results well, but showed different trends in each of the models.

  18. Isotope effect in normal-to-local transition of acetylene bending modes

    SciTech Connect (OSTI)

    Ma, Jianyi; Xu, Dingguo; Guo, Hua; Tyng, Vivian; Kellman, Michael E.

    2012-01-01

    The normal-to-local transition for the bending modes of acetylene is considered a prelude to its isomerization to vinylidene. Here, such a transition in fully deuterated acetylene is investigated using a full-dimensional quantum model. It is found that the local benders emerge at much lower energies and bending quantum numbers than in the hydrogen isotopomer HCCH. This is accompanied by a transition to a second kind of bending mode called counter-rotator, again at lower energies and quantum numbers than in HCCH. These transitions are also investigated using bifurcation analysis of two empirical spectroscopic fitting Hamiltonians for pure bending modes, which helps to understand the origin of the transitions semiclassically as branchings or bifurcations out of the trans and normal bend modes when the latter become dynamically unstable. The results of the quantum model and the empirical bifurcation analysis are in very good agreement.

  19. Facilities management: the development of a model for building condition assessment surveys conducted at Fort Riley, Kansas 

    E-Print Network [OSTI]

    Riblett, Carl Olin

    1993-01-01

    The purpose of this study is to document the research and design of a condition assessment system for buildings by utilizing case study methods for the facilities located at Fort Riley, Kansas, an Army military installation. ...

  20. Building America Whole-House Solutions for New Home: Fort Devens: Cold Climate Market-Rate Townhomes

    Broader source: Energy.gov [DOE]

    Fort Devens: Cold Climate Market-Rate Townhomes Targeting HERS Index of 40, Harvard, Massachusetts (Fact Sheet), Building America Case Study: Efficient Solutions for New and Existing Homes, Building Technologies Office (BTO)

  1. Reinhabiting the Fort Point Channel : a proposal for transforming and extending the warehouse district in South Boston

    E-Print Network [OSTI]

    Dale, John Randall

    1986-01-01

    The focus of this design investigation is the warehouse fabric of the Fort Point Channel and its potentials as a model for further development This extensive configuration of warehouses and access roads is the product of ...

  2. Annual Radiological Environmental Monitoring Program Report for the Fort St. Vrain Independent Spent Fuel Storage Installation

    SciTech Connect (OSTI)

    Hall, Gregory Graham; Newkirk, Jay Ronald; Borst, Frederick Jon

    2002-02-01

    This report presents the results of the 2001 Radiological Environmental Monitoring Program conducted in accordance with 10 CFR 72.44 for the Fort St. Vrain Independent Spent Fuel Storage Installation. A description of the facility and the monitoring program is provided. The results of monitoring the predominant radiation exposure pathway, direct and scattered radiation exposure, indicate the facility operation has not contributed to any increase in the estimated maximum potential dose commitment to the general public.

  3. Combating soil erosion: AgriLife scientist discovering what works for Fort Hood 

    E-Print Network [OSTI]

    Wythe, Kathy

    2008-01-01

    of this partnership, Dr. Dennis Hoffman, senior research scientist, and other researchers at Texas AgriLife Research Blackland Research and Extension Center began monitoring water quality. They measured nutrient and sediment losses across many of Fort Hood?s... watersheds. As a result of the monitoring NRCS and ITAM put in more than 30 sediment retention ponds to trap sediment contained in stormwater runoff. ?We then began to monitor watersheds to estimate sediment trapping as a result of the ponds,? Hoffman...

  4. Methodology for the evaluation of a 4000-home geothermal heat pump retrofit at Fort Polk, Louisiana

    SciTech Connect (OSTI)

    Hughes, P.J.; Shonder, J.A.; White, D.L.; Huang, H.L.

    1998-03-01

    The US Army and a private energy service company are developing a comprehensive energy efficiency project to upgrade the family housing at Fort Polk, Louisiana. The project includes converting the space conditioning systems of more than 4,000 housing units to geothermal (or ground-source) heat pumps (GHPs). This interim report describes the methodology of the evaluation associated with this project, including the field monitoring that has been conducted at the base.

  5. Energy Engineering Analysis Program (EEAP) Fort Polk airfield lighting; lighting retrofit

    SciTech Connect (OSTI)

    1993-03-01

    The purpose of this study is to analyze the existing lighting types and levels at three different maintenance hangars (Buildings. No. 4262, No. 4295, and No. 4297) at Fort Polk and to make recommendations for the most economical and preferred new lighting fixtures, arrangements, and method of control. The Life Cycle Cost In Design (LCCID) program was used to determine the Life Cycle Cost (LCC) and Savings to Investment Ratio (SIR) for the analyzed retrofit for a 20 year study life.

  6. Energy Engineering Analysis Program, Fort Polk, Louisiana. Final executive summary, increment `f`

    SciTech Connect (OSTI)

    1988-06-01

    Executive Order 12003, dated 19 July 1977, initiated the U.S. Army`s energy conservation effort. Specifically, the Executive Order led to the development of the Army Facilities Energy Plan which directs Army Staff and Major Army Commands to develop detailed implementation plans for energy conservation. As a result of these directives, the Fort Worth District of the U.S. Army Corps of Engineers contracted for an Energy Engineering Analysis Program (EEAP) at Fort Polk, Louisiana. The EEAP included Increments `A`, `B`, `E`, and `G`. To accomplish the intent of Increment `P`, namely, providing low cost/no cost energy savings recommendations in the form of specific, practical instructions for use by the Facility Engineer, the following general steps were taken: (1) Consider treasures identified in Detailed Scope of Work. (2) identify other potential Low Cost/No Cost energy Conservation Measures (ECM) through discussions with Fort Polk personnel and field surveys by Graham Associates engineers. (3) Review Increments `A`, `B`, and `G` for ECM`s within the Facility Engineer`s funding authority; $200,000 for alteration projects and $1,000,000 for maintenance and repair type work. (4) Evaluate ECM`s using relevant data for other Increments of the ESAP, and develop new data where appropriate.

  7. Effect of Loading Mode and Coating on Dynamic Fatigue of Optical Fiber in Two-Point Bending

    E-Print Network [OSTI]

    Matthewson, M. John

    and hence on the reliability of the bending technique. This paper presents dynamic fatigue results usingEffect of Loading Mode and Coating on Dynamic Fatigue of Optical Fiber in Two-Point Bending Science and Engineering, Rutgers University, Piscataway, New Jersey 08855-0909 Tho-point bending

  8. JOURNAL OF DISPLAY TECHNOLOGY, VOL. 1, NO. 2, DECEMBER 2005 207 Bending Angle Effects on the Multi-Domain

    E-Print Network [OSTI]

    Wu, Shin-Tson

    ]. In this paper, we analyzed the bending-angle effect of the chevron-shaped electrodes in the multi-domain (MDJOURNAL OF DISPLAY TECHNOLOGY, VOL. 1, NO. 2, DECEMBER 2005 207 Bending Angle Effects on the Multi, which combines the finite element and finite difference methods for fast solutions. The bending angle

  9. Identities for the fundamental solution of thin plate bending problems and the nonuniqueness of the hypersingular BIE solution

    E-Print Network [OSTI]

    Liu, Yijun

    for the fundamental solution of thin plate bending problems are presented in this paper. These identities canIdentities for the fundamental solution of thin plate bending problems and the nonuniqueness bending Boundary integral equation Boundary element method a b s t r a c t Four integral identities

  10. Digital Method of Analyzing the Bending Stiffness of Non-Crimp Fabrics

    SciTech Connect (OSTI)

    Soteropoulos, Dimitri; Fetfatsidis, Konstantine; Sherwood, James A.; Langworthy, Joanna [Department of Mechanical Engineering, University of Massachusetts, Lowell One University Ave., Lowell, MA 01854 (United States)

    2011-05-04

    A digital-analytical method for characterizing the bending behavior of NCFs (Non-Crimp Fabrics) is developed. The study is based on a hanging fabric loaded to a known displacement. The image of the deformed fabric is captured digitally, and then analyzed to describe the deformed shape of the beam using x-y coordinates. The bending stiffness of the fabric is then determined through an iterative method using a finite element method (ABAQUS). This effective bending stiffness is of importance in the formation of wave defects in NCFs during manufacturing processes such as thermoforming, vacuum assisted resin transfer molding, and compression molding.

  11. The importance of jet bending in gamma-ray AGNs—revisited

    SciTech Connect (OSTI)

    Graham, P. J.; Tingay, S. J.

    2014-04-01

    We investigate the hypothesis that ?-ray-quiet active galactic nuclei (AGNs) have a greater tendency for jet bending than ?-ray-loud AGNs, revisiting the analysis of Tingay et al. We perform a statistical analysis using a large sample of 351 radio-loud AGNs along with ?-ray identifications from the Fermi Large Area Telescope (LAT). Our results show no statistically significant differences in jet-bending properties between ?-ray-loud and ?-ray-quiet populations, indicating that jet bending is not a significant factor for ?-ray detection in AGNs.

  12. Curvature of a cantilever beam subjected to an equi-biaxial bending moment

    SciTech Connect (OSTI)

    Krulevitch, P.; Johnson, G.C.

    1998-04-28

    Results from a finite element analysis of a cantilever beam subjected to an equi-biaxial bending moment demonstrate that the biaxial modulus E/(I-v) must be used even for narrow beams.

  13. Late Cretaceous to Paleocene oroclinal bending in the central Pontides (Turkey)

    E-Print Network [OSTI]

    Utrecht, Universiteit

    Late Cretaceous to Paleocene oroclinal bending in the central Pontides (Turkey) Maud J. M. Meijers (Turkey), Tectonics, 29, TC4016, doi:10.1029/2009TC002620. 1. Introduction [2] The Turkish Pontides

  14. Energy losses in thermally cycled optical fibers constrained in small bend radii

    SciTech Connect (OSTI)

    Guild, Eric; Morelli, Gregg

    2012-09-23

    High energy laser pulses were fired into a 365?m diameter fiber optic cable constrained in small radii of curvature bends, resulting in a catastrophic failure. Q-switched laser pulses from a flashlamp pumped, Nd:YAG laser were injected into the cables, and the spatial intensity profile at the exit face of the fiber was observed using an infrared camera. The transmission of the radiation through the tight radii resulted in an asymmetric intensity profile with one half of the fiber core having a higher peak-to-average energy distribution. Prior to testing, the cables were thermally conditioned while constrained in the small radii of curvature bends. Single-bend, double-bend, and U-shaped eometries were tested to characterize various cable routing scenarios.

  15. Implementation of a python version of a scaled boundary finite element method for plate bending analysis

    E-Print Network [OSTI]

    Chen, Lingfeng, M. Eng. Massachusetts Institute of Technology

    2014-01-01

    Common finite element programs for plate bending analysis are complicated and limited by the common plate theories. Such programs are usually not user-friendly for designers to implement. Lately, Hou Man et al. from the ...

  16. Geothermal heat pump energy savings performance contract at Fort Polk, LA: Lessons learned

    SciTech Connect (OSTI)

    Shonder, J.A.; Hughes, P.J.; Gordon, R.; Giffin, T.

    1997-08-01

    At Fort Polk, LA the space conditioning systems of 4,003 military family housing units have been converted to geothermal heat pumps (GHP) under an energy savings performance contract (ESPC). At the same time, other efficiency measures, such as compact fluorescent lights (CFLs), low-flow shower heads, and attic insulation, were installed. An independent evaluation of the Fort Polk ESPC was carried out. Findings indicate that the project has resulted in a 25.6 million kWh savings in electrical energy use, or 32.4% of the pre-retrofit electrical consumption in family housing, for a typical meteorological year. Peak electrical demand has also been reduced by 6,541 kW, which is 39.6% of the pre-retrofit peak demand. Natural gas savings are about 260,000 therms per year. In addition, the ESPC has allowed the Army to effectively cap its future expenditures for family housing HVAC maintenance at about 77% of its previous costs. Given these successful results, the Fort Polk ESPC can provide a model for other ESPCs in both the public and the private sectors. The purpose of this paper is to outline the method by which the ESPC was engineered and implemented, both from the standpoint of the facility owner (the US Army) and the energy services company (ESCO) which is carrying out the contract. The lessons learned from this experience should be useful to other owners, ESCOs and investors in the implementation of future ESPCs. It should be noted that the energy savings presented in this document are the apparent energy savings observed in the monitored data, and are not to be confused with the contracted energy savings used as the basis for payments. To determine the contracted energy savings, the apparent energy savings may require adjustments for such things as changes in indoor temperature performance criteria, additions of ceiling fans, and other factors.

  17. Geothermal Heat Pump Energy Savings Performance Contract at Fort Polk, LA: Lessons Learned

    SciTech Connect (OSTI)

    Hughes, Patrick; Shonder, John A; Gordon, Richard; Giffin, Tom

    1997-06-01

    At Fort Polk, Louisiana, the space-conditioning systems of 4,003 military family housing units have been converted to geothermal heat pumps (GHPs) under an energy savings performance contract. At the same time, other efficiency measures, such as compact fluorecent lights, low-flow shower heads, and attic insulation, were installed. An independent evaluation of the Fort Polk energy savings performance contract was carried out. Findings indicate that the project has resulted in a 25.6 million kWh savings in electrical energy use, or 32.4% of the pre-retrofit electrical consumption in family housing, for a typical meteorological year. Peak electrical demand has also been reduced by about 6,761 kW, which is 40.2% of the pre-retrofit peak demand. Natural gas savings are about 260,000 therms per year. In addition, the energy savings performance contract has allowed the Army to effectively cap its future expenditures for family housing HVAC maintenance at about 77% of its previous costs. Given these successful results, the Fort Polk performance contract can provide a model for other contracts in both the public and private sectors. The purpose of this paper is to outline the method by which the contract was engineed and implemented, both from the standpoint of the facility owner (the U.S. Army) and the energy services company that is carrying out the contract. The lessons learned from this experience should be useful to other owners, service companies, and investors in the implementation of future service contracts. It should be noted that the energy savings presented in this document are the 'apparent' energy savings observed in the monitored data and not to be mistaken for the 'contract' energy savings used as the basis for payments. To determine the 'contracted' energy savings, the 'apparent' energy savings may require adjustments for such things as changes in the indoor temperature performance criteria, additions of ceiling fans, and other factors.

  18. Numerical simulations of the bending of narrow-angle-tail radio jets by ram pressure or pressure gradients

    SciTech Connect (OSTI)

    Soker, N.; Sarazin, C.L.; O'Dea, C.P.

    1988-04-01

    Three-dimensional numerical hydrodynamic simulations are used to study the bending of radio jets. The simulations are compared with observations of jets in narrow-angle-tail radio sources. Two mechanisms for the observed bending are considered: direct bending of quasi-continuous jets by ram pressure from intergalactic gas and bending by pressure gradients in the interstellar gas of the host galaxy, the pressure gradients themselves being the result of ram pressure by intergalactic gas. It is shown that the pressure gradients are much less effective in bending jets, implying that the jets have roughly 30 times lower momentum fluxes if they are bent by this mechanism. Ram-pressure bending produces jets with kidney-shaped cross sections; when observed from the side, these jets appear to have diffuse extensions on the downstream side. On the other hand, pressure-gradient bending causes the jets to be densest near their upstream side. 31 references.

  19. The Role of Occupant Behavior in Achieving Net Zero Energy: A Demonstration Project at Fort Carson

    SciTech Connect (OSTI)

    Judd, Kathleen S.; Sanquist, Thomas F.; Zalesny, Mary D.; Fernandez, Nicholas

    2013-09-30

    This study, sponsored by the U.S. General Services Administration’s Office of Federal High-Performance Green Buildings, aimed to understand the potential for institutional and behavioral change to enhance the performance of buildings, through a demonstration project with the Department of Defense in five green buildings on the Fort Carson, Colorado, Army base. To approach this study, the research team identified specific occupant behaviors that had the potential to save energy in each building, defined strategies that might effectively support behavior change, and implemented a coordinated set of actions during a three-month intervention.

  20. Fort Devens: Cold Climate, Energy-Efficient, Market-Rate Townhomes

    SciTech Connect (OSTI)

    Zoeller, W.; Slattery, M.; Grab, J.

    2013-08-01

    In 2009, Mass Development issued an RFQ and subsequent RFP for teams to develop moderately priced high-efficiency homes on two sites within the Devens Regional Enterprise Zone. MassDevelopment, a Massachusetts agency that owns the Devens site (formerly Fort Devens Army Base, in Harvard, Massachusetts), set a goal of producing a replicable example of current and innovative sustainable building practices with a near-zero energy potential. Metric Development, as primary developer and construction manager, formed one of the successful teams that included CARB and Cambridge Seven Architects (C7A).

  1. Geothermal Direct Use Feasibility Study on the Fort Bidwell Indian Reservation

    SciTech Connect (OSTI)

    Dale Merrick

    2007-04-20

    The Fort Bidwell Indian Reservation (FBIR) is rich in renewable energy resources. Development of its geothermal resources has the potential to profoundly affect the energy and economic future of the FBIC. Geothermal energy can contribute to making the reservation energy self-sufficient and, potentially, an energy exporter. The feasibility study assessed the feasibility of installing a geothermal district heating system to provide low-cost, efficient heating of existing and planned residences, community buildings and water, using an existing geothermal well, FB-3.

  2. Flow Test At Fort Bliss Area (DOE GTP) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View New PagesSustainable Urban Transport Jump to:Flanders,Information85-1986) JumpFort Bliss

  3. 2-M Probe At Fort Bliss Area (DOE GTP) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to:EAand Dalton Jump to:Wylie, Texas:V.S.A.EnergyInformation DeadFlintFort

  4. Density Log at Fort Bliss Area (DOE GTP) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoopButtePower VenturesInformation9) WindGridDeepi hassourceDemocratic RepublicFort

  5. Bending rigidity of stiff polyelectrolyte chains: Single chain and a bundle of multichains

    E-Print Network [OSTI]

    Bae-Yeun Ha; D. Thirumalai

    2003-12-12

    We study the bending rigidity of highly charged stiff polyelectrolytes, for both a single chain and many chains forming a bundle. A theory is developed to account for the interplay between competitive binding of counterions and charge correlations in softening the polyelectrolyte (PE) chains. The presence of even a small concentration of multivalent counterions leads to a dramatic reduction in the bending rigidity of the chains that are nominally stiffened by the repulsion between their backbone charges. The variation of the bending rigidity as a function of $f_{0}$, the fraction of charged monomers on the chain, does not exhibits simple scaling behavior; it grows with increasing $f_{0}$ below a critical value of $f_{0}$. Beyond the critical value, however, the chain becomes softer as $f_{0}$ increases. The bending rigidity also exhibits intriguing dependence on the concentration of multivalent counterion $n_{2}$; for highly charged PEs, the bending rigidity decreases as $n_2$ increases from zero, while it increases with increasing $n_{2}$ beyond a certain value of $n_{2}$. When polyelectrolyte chains form a $N$-loop condensate (e.g., a toroidal bundle formed by $N$ turns (winds) of the chain), the inter-loop coupling further softens the condensate, resulting in the bending free energy of the condensate that scales as $N$ for large $N$.

  6. Depositional history of the Mississippian Ullin and Fort Payne Formations in the Illinois Basin

    SciTech Connect (OSTI)

    Lasemi, Z.; Treworgy, J.D.; Norby, R.D. (Illinois State Geological Survey, Champaign, IL (United States))

    1994-04-01

    Field and subsurface data suggest that the mid-Mississippian Ullin Limestone in the Illinois Basin is composed of coalesced Waulsortian-type mounds and porous bryozoan-dominated buildups. Waulsortian mounds in the basin contain a lime mudstone to wackestone core that is flanked and capped by in situ porous bryozoan bafflestone or transported crinoidal-bryozoan packstone and grainstone. The mound core facies appear to be most common in the lower part of the Ullin and is thicker in a deeper outer-ramp setting. Shoreward and up-section (upper part of the outer-ramp through mid-ramp setting), the core facies is generally thinner, while the flanking and capping facies are thicker. Isopachous maps of the Ullin and Fort Payne suggest the presence of several large areas of thick carbonate buildups (Ullin) surrounded by a deep-water, sub-oxic environment (Fort Payne) in the Illinois Basin. Progradation of these buildups and associated facies resulted in a shallower ramp setting during deposition of the upper Ullin. Storm-generated carbonate sandwaves became widespread on this ramp. Sandwaves were mobile and for the most part unfavorable sites for further development of thick mud mounds and/or in situ bryozoan buildups. However, isolated mounds and flanking buildups are present in the upper part of the Ullin, and, together with the sandwaves, formed an irregular topography that led to the development of oolitic grainstone shoals during deposition of the overlying Salem Limestone.

  7. Seeing Savings from an ESPC Project in Fort Polk's Utility Bills

    SciTech Connect (OSTI)

    Shonder, J.A.

    2005-03-08

    Federal agencies have implemented many energy efficiency projects over the years with direct funding or alternative financing vehicles such as energy savings performance contracts (ESPCs). While it is generally accepted that these projects save energy and costs, the savings are usually not obvious in the utility bills. This is true for many valid technical reasons, even when savings are verified in other ways to the highest degree of certainty. However, any perceived deficiency in the evidence for savings is problematic when auditors or other observers evaluate the outcome of energy projects and the achievements of energy management programs. This report discusses under what circumstances energy savings should or should not be evident in utility bills. In the special case of a large ESPC project at the Army's Fort Polk, the analysis of utility bills carried out by the authors does unequivocally confirm and quantify savings. The data requirements and methods for arriving at definitive answers through utility bill analysis are demonstrated in our discussion of the Fort Polk project. The following paragraphs address why the government generally should not expect to see savings from ESPC projects in their utility bills. We also review lessons learned and best practices for measurement and verification (M&V) that can assure best value for the government and are more practical, straightforward, and cost-effective than utility bill analysis.

  8. Yukon Exploration and GEoloGY 2009 293 Soil reconnaissance of the Fort Selkirk volcanic field, Yukon (115I/13 and 14)

    E-Print Network [OSTI]

    Sanborn, Paul

    Yukon Exploration and GEoloGY 2009 293 Soil reconnaissance of the Fort Selkirk volcanic field of the Fort Selkirk volcanic field, Yukon (115I/13 and 14). In: Yukon Exploration and Geology 2009, K.E. MacFarlane, L.H. Weston and L.R. Blackburn (eds.), Yukon Geological Survey, p. 293-304. aBStraCt Valley

  9. Brazoria County, Texas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmentalBowerbank, Maine: Energy Resources

  10. The bends in the slopes of radial abundance gradients in the disks of spiral galaxies -- do they exist?

    E-Print Network [OSTI]

    L. S. Pilyugin

    2002-10-17

    Spiral galaxies with a reported bend in the slope of gradient in the oxygen abundances (O/H)_R23, derived with traditionally used R23 - method, were examined. It is shown that the artificial origin of the reported bends can be naturally explained. Two reasons that result in a false bend in the slope of (O/H)_R23 gradient are indicated. It is concluded that at the present time there is no example of a galaxy with an undisputable established bend in the slope of the oxygen abundance gradient.

  11. A Comparison of Static and Dynamic Traffic Assignment Under Tolls: A Study of the Dallas-Fort Worth Network

    E-Print Network [OSTI]

    Kockelman, Kara M.

    A Comparison of Static and Dynamic Traffic Assignment Under Tolls: A Study of the Dallas-Fort Worth, most of the work in the literature uses static transportation models for analysis. The benefits comparison of static traffic assignment with the VISTA model, a simulation-based dynamic traffic assignment

  12. Preliminary assessment report for Fort Jacob F. Wolters, Installation 48555, Mineral Wells, Texas. Installation Restoration Program

    SciTech Connect (OSTI)

    Dennis, C.B.

    1993-08-01

    This report presents the results of the preliminary assessment (PA) conducted by Argonne National Laboratory at the Texas Army National Guard (TXARNG) property near Mineral Wells, Texas. Preliminary assessments of federal facilities are being conducted to compile the information necessary for completing preremedial activities and to provide a basis for establishing corrective actions in response to releases of hazardous substances. The principal objective of the PA is to characterize the site accurately and determine the need for further action by examining site activities, quantities of hazardous substances present, and potential pathways by which contamination could affect public health and the environment. This PA satisfies, for the Fort Wolters property, the requirement of the Department of Defense Installation Restoration Program.

  13. Preliminary assessment report for Fort Custer Training Center, Installation 26035, Augusta, Michigan. Installation Restoration Program

    SciTech Connect (OSTI)

    Flaim, S.; Krokosz, M.

    1993-08-01

    This report presents the results of the preliminary assessment (PA) conducted by Argonne National Laboratory at the Michigan Army National Guard property near Augusta, Michigan. Preliminary assessments of federal facilities are being conducted to compile the information necessary for completing preremedial activities and to provide a basis for establishing corrective actions in response to releases of hazardous substances. The principal objective of the PA is to characterize the site accurately and determine the need for further action by examining site activities, quantities of hazardous substances present, and potential pathways by which contamination could affect public health and the environment. This PA satisfies, for the Fort Custer Training Center, phase I of the Department of Defense Installation Restoration Program. The environmentally significant operations associated with the property are (1) storage of hazardous materials and hazardous waste, (2) storage and dispensing of fuel, (3) washing of vehicles and equipment, and (4) weapons training ranges that may have accumulated lead.

  14. Integrated Assessment Plan Template and Operational Demonstration for SPIDERS Phase 2: Fort Carson

    SciTech Connect (OSTI)

    Barr, Jonathan L.; Tuffner, Francis K.; Hadley, Mark D.; Kreyling, Sean J.; Schneider, Kevin P.

    2013-09-01

    This document contains the Integrated Assessment Plan (IAP) for the Phase 2 Operational Demonstration (OD) of the Smart Power Infrastructure Demonstration for Energy Reliability (SPIDERS) Joint Capability Technology Demonstration (JCTD) project. SPIDERS will be conducted over a three year period with Phase 2 being conducted at Fort Carson, Colorado. This document includes the Operational Demonstration Execution Plan (ODEP) and the Operational Assessment Execution Plan (OAEP), as approved by the Operational Manager (OM) and the Integrated Management Team (IMT). The ODEP describes the process by which the OD is conducted and the OAEP describes the process by which the data collected from the OD is processed. The execution of the OD, in accordance with the ODEP and the subsequent execution of the OAEP, will generate the necessary data for the Quick Look Report (QLR) and the Utility Assessment Report (UAR). These reports will assess the ability of the SPIDERS JCTD to meet the four critical requirements listed in the Implementation Directive (ID).

  15. Fort Devens. Cold Climate, Energy-Efficient, Market-Rate Townhomes

    SciTech Connect (OSTI)

    Zoeller, William; Slattery, Matt; Grab, Joanna

    2013-08-01

    In 2009, Mass Development issued a RFP for teams to develop moderately priced high-efficiency homes on two sites within the Devens Regional Enterprise Zone. MassDevelopment, a Massachusetts agency that owns the Devens site (formerly Fort Devens Army Base, in Harvard, Massachusetts), set a goal of producing a replicable example of current and innovative sustainable building practices with a near-zero energy potential. Metric Development, as primary developer and construction manager, formed one of the successful teams that included CARB and Cambridge Seven Architects (C7A). This report describes the development of high performance, affordable, and replicable designs developed by the team in test homes and plans to move forward with the next buildings.

  16. Bending elasticity of a curved amphiphilic film decorated anchored copolymers: a small angle neutron scattering study

    E-Print Network [OSTI]

    Jacqueline Appell; Christian Ligoure; Gregoire Porte

    2004-06-30

    Microemulsion droplets (oil in water stabilized by a surfactant film) are progressively decorated with increasing amounts of poly ethylene- oxide (PEO) chains anchored in the film by the short aliphatic chain grafted at one end of the PEO chain . The evolution of the bending elasticity of the surfactant film with increasing decoration is deduced from the evolution in size and polydispersity of the droplets as reflected by small angle neutron scattering. The optimum curvature radius decreases while the bending rigidity modulus remains practically constant. The experimental results compare well with the predictions of a model developed for the bending properties of a curved film decorated by non-adsorbing polymer chains, which takes into account, the finite curvature of the film and the free diffusion of the chains on the film.

  17. The evaluation of a 4000-home geothermal heat pump retrofit at Fort Polk, Louisiana: Final Report

    SciTech Connect (OSTI)

    Hughes, P.J.; Shonder, J.A.

    1998-03-01

    This report documents an independent evaluation of an energy retrofit of 4,003 family housing units at Fort Polk, Louisiana, under an energy savings performance contract (ESPC). Replacement of the heating, cooling, and water heating systems in these housing units with geothermal heat pumps (GHPs) anchored the retrofit; low-flow shower heads and compact fluorescent lighting were also installed, as well as attic insulation where needed. Statistically valid findings indicate that the project will save 25.8 million kWh, or 32.5% of the pre-retrofit whole-community electrical consumption, and 100% of the whole-community natural gas previously used for space conditioning and water heating (260,000 therms) in a typical meteorological year. At the end-use level, the GHPs were found to save about 42% of the pre-retrofit electrical consumption for heating, cooling, and water heating in housing units that were all-electric in the pre-retrofit period. This report also demonstrates an improved method of predicting energy savings. Using an engineering model calibrated to pre-retrofit energy use data collected in the field, the method predicted actual energy savings on one of the electric feeders at Fort Polk with a very high degree of accuracy. The accuracy of this model was in turn dependent on data-calibrated models of the geothermal heat pump and ground heat exchanger that are described in this report. In addition this report documents the status of vertical borehole ground heat exchanger (BHEx) design methods at the time this project was designed, and demonstrates methods of using data collected from operating GHP systems to benchmark BHEx design methods against a detailed engineering model calibrated to date. The authors also discuss the ESPC`s structure and implementation and how the experience gained here can contribute to the success of future ESPCs.

  18. FRC Performance Comparison: Direct Tensile Test, FRC Performance Comparison: Direct Tensile Test, BeamBeamType Bending Test, and Round Panel TestType Bending Test, and Round Panel Test

    E-Print Network [OSTI]

    Chao, Shih-Ho

    FRC Performance Comparison: Direct Tensile Test, FRC Performance Comparison: Direct Tensile Test, BeamBeamType Bending Test, and Round Panel TestType Bending Test, and Round Panel Test ShihShihHo ChaoTo compare the performance of FRC materials when evaluated by three major types of material tests (Unia ial

  19. Reaction dynamics of atomic chlorine with methane: Importance of methane bending and torsional excitation in controlling reactivity

    E-Print Network [OSTI]

    Reaction dynamics of atomic chlorine with methane: Importance of methane bending and torsional with methane vibrationally excited in trace quantities into low-energy bending and torsional modes­7 and detailed the effect on reactivity of C­H stretch vibrational excitation.5­7 This paper concerns our most

  20. Experimental and Analytical Modeling of Concrete-Filled FRP Tubes Subjected to Combined Bending and Axial Loads

    E-Print Network [OSTI]

    structures were considered. Axial load - bending moment interaction curves are presented. The paper presents1 Experimental and Analytical Modeling of Concrete-Filled FRP Tubes Subjected to Combined Bending and Axial Loads Amir Fam 1 , Bart Flisak 2 and Sami Rizkalla 3 Abstract This paper presents test results

  1. Visual Languages `94 Repenning, A., "Bending Icons: Syntactic and Semantic Transformation of Icons," Proceedings of the 1994 IEEE

    E-Print Network [OSTI]

    Repenning, Alexander

    Visual Languages `94 Reprint: Repenning, A., "Bending Icons: Syntactic and Semantic Transformation-303. Bending Icons: Syntactic and Semantic Transformations of Icons Alex Repenning Department of Computer. These transformations can significantly reduce the laborious work of icon designers and programmers. This paper

  2. PHYSICAL REVIEW E 85, 011902 (2012) Estimating the bending modulus of a FtsZ bacterial-division protein filament

    E-Print Network [OSTI]

    Allard, Jun

    2012-01-01

    -division protein filament Eric N. Cytrynbaum* Department of Mathematics, University of British Columbia, Vancouver into a highly curved conformation, we estimate the FtsZ filament bending modulus to be 310­390 pN nm2 . If we estimated values and, if correct, may raise challenges for models that rely on filament bending to generate

  3. A numerical method for predicting the bending fatigue life of NiTi and stainless steel root canal

    E-Print Network [OSTI]

    Zheng, Yufeng

    A numerical method for predicting the bending fatigue life of NiTi and stainless steel root canal. A numerical method for predicting the bending fatigue life of NiTi and stainless steel root canal instruments­titanium alloy (NiTi) and stainless steel (SS) endodontic files using finite element analysis. Methodology

  4. Four-point-bending-fatigue behavior of the Zr-based Vitreloy 105 bulk metallic glass

    SciTech Connect (OSTI)

    Morrison, M. L. [University of Tennessee, Knoxville (UTK); Buchanan, R. A. [University of Tennessee, Knoxville (UTK); Liaw, Peter K [University of Tennessee, Knoxville (UTK); Green, B. A. [University of Tennessee, Knoxville (UTK); Wang, G Y [University of Tennessee, Knoxville (UTK); Liu, Chain T [ORNL; Horton Jr, Joe A [ORNL

    2007-01-01

    The purpose of this study was to make a direct comparison between four-point-bending and uniaxial fatigue tests with the Zr{sub 52.5}Cu{sub 17.9}Ni{sub 14.6}Al{sub 10.0}Ti{sub 5.0} (at.%) BMG alloy (Vitreloy 105). The fatigue lifetimes in four-point bending were found to be greater than those reported in uniaxial testing. However, the fatigue-endurance limit found in four-point bending was slightly less than that reported for uniaxial fatigue. Thus, the significant differences between fatigue studies in the literature are not likely due to this difference in testing geometry. On the contrary, the fatigue lifetimes were found to be highly dependent upon surface defects and material quality. The four-point-bending-fatigue performance of the Vit 105 alloy was found to be greater than most BMGs and similar to the 300 M high-strength steel and other crystalline alloys in spite of not being 'perfectly amorphous.' Due to the detrimental effects of these inhomogeneities and wear at the supporting pins, this fatigue behavior can be assumed to be a conservative estimate of the potential fatigue performance of a perfectly amorphous and homogeneous BMG.

  5. Theoretical solution for light transmission of a bended hollow light guide

    SciTech Connect (OSTI)

    Kocifaj, Miroslav; Darula, Stanislav; Kittler, Richard [ICA, Slovak Academy of Sciences, 9, Dubravska Road, 845 03 Bratislava (Slovakia); Kundracik, Frantisek [Department of Experimental Physics, FMPI, Comenius University, Mlynska dolina, 842 48 Bratislava (Slovakia)

    2010-08-15

    Hollow light guides with very high reflective inner surfaces are novel daylight systems that collect sunlight and skylight available on the roof of buildings transporting it into deep or windowless interiors in building cores. Thus the better utilization of daylight can result in energy savings and wellbeing in these enclosed indoor spaces. An analytical complex solution of a straight tube system was solved in the HOLIGILM method with a user-friendly tool available on the http://www.holigilm.info. An even more difficult light flow transport is to be determined in bended tubes usually placed on sloped roofs where a bend is necessary to adjust the vertical pass through the ceilings. This paper presents the theoretical derivation of the model with its graphical representation and coordinate system respecting backward ray-tracing bend distortions. To imagine the resulting illuminance on the horizontal plane element in the interior, the virtual ray (i.e. luminance in an elementary solid angle) has to pass the ceiling diffuser interface, the inner mirror like tube with a bend, through a roof cupola attachment to the element of the sky and sun light source. Due to this complexity and the lengthy derivation and explanations more practical applications will be published later in a separate contribution. (author)

  6. Design, Manufacture and Testing of A Bend-Twist D-Spar

    SciTech Connect (OSTI)

    Ong, Cheng-Huat; Tsai, Stephen W.

    1999-06-01

    Studies have indicated that an adaptive wind turbine blade design can significantly enhance the performance of the wind turbine blade on energy capture and load mitigation. In order to realize the potential benefits of aeroelastic tailoring, a bend-twist D-spar, which is the backbone of a blade, was designed and fabricated to achieve the objectives of having maximum bend-twist coupling and fulfilling desirable structural properties (031 & GJ). Two bend-twist D-spars, a hybrid of glass and carbon fibers and an all-carbon D-spar, were fabricated using a bladder process. One of the D-spars, the hybrid D-spar, was subjected to a cantilever static test and modal testing. Various parameters such as materials, laminate schedule, thickness and internal rib were examined in designing a bend-twist D-spar. The fabrication tooling, the lay-up process and the joint design for two symmetric clamshells are described in this report. Finally, comparisons between the experimental test results and numerical results are presented. The comparisons indicate that the numerical analysis (static and modal analysis) agrees well with test results.

  7. Static and fatigue bending behavior of pultruded GFRP sandwich panels with through-thickness fiber insertions

    E-Print Network [OSTI]

    Static and fatigue bending behavior of pultruded GFRP sandwich panels with through-thickness fiber testing a b s t r a c t This paper presents the findings of a research program that was undertaken to evaluate the effective elastic modulus, shear modulus and degree of composite interaction of the panels

  8. Fast-response no-bias-bend liquid crystal displays using nanostructured surfaces

    E-Print Network [OSTI]

    Fast-response no-bias-bend liquid crystal displays using nanostructured surfaces Fion Sze-Yan Yeung 21 December 2005; published online 7 February 2006 We present results of a fast-response no of liquid crystal displays LCDs re- quire fast response times. For example, image blurring due to slow

  9. An investigation of axial stresses in a fabric reinforced plastic subjected to repeated bending 

    E-Print Network [OSTI]

    Kavanaugh, Herbert C

    1964-01-01

    &~. A. 7, Crs, sr? Sonoe. noous Stress Disl r~uuti rn C = 6E', CQ ps. Theoret;osl Stree Zzstrxbutxon Tn outernost F&ber ~Fi ure ~1 ~Fi 14 Theoretical Stress Distribution In Composite Material Due To Bending 50 Cycles to White Dot 2, 407, 000...

  10. Guided wave radiation from a point source in the proximity of a pipe bend

    SciTech Connect (OSTI)

    Brath, A. J.; Nagy, P. B.; Simonetti, F.; Instanes, G.

    2014-02-18

    Throughout the oil and gas industry corrosion and erosion damage monitoring play a central role in managing asset integrity. Recently, the use of guided wave technology in conjunction with tomography techniques has provided the possibility of obtaining point-by-point maps of wall thickness loss over the entire volume of a pipeline section between two ring arrays of ultrasonic transducers. However, current research has focused on straight pipes while little work has been done on pipe bends which are also the most susceptible to developing damage. Tomography of the bend is challenging due to the complexity and computational cost of the 3-D elastic model required to accurately describe guided wave propagation. To overcome this limitation, we introduce a 2-D anisotropic inhomogeneous acoustic model which represents a generalization of the conventional unwrapping used for straight pipes. The shortest-path ray-tracing method is then applied to the 2-D model to compute ray paths and predict the arrival times of the fundamental flexural mode, A0, excited by a point source on the straight section of pipe entering the bend and detected on the opposite side. Good agreement is found between predictions and experiments performed on an 8” diameter (D) pipe with 1.5 D bend radius. The 2-D model also reveals the existence of an acoustic lensing effect which leads to a focusing phenomenon also confirmed by the experiments. The computational efficiency of the 2-D model makes it ideally suited for tomography algorithms.

  11. EIS-0296: South Oregon Coast Reinforcement Project, Coos Bay/North Bend, Oregon

    Broader source: Energy.gov [DOE]

    This EIS analyzes BPA's proposed action to build a 500- kilovolt (kV) transmission line and new substation to reinforce electrical service to the southern coast of the state of Oregon. Nucor Steel, a division of Nucor Corporation, may build a new steel mill in the Coos Bay/North Bend, Oregon, area.

  12. EIS-0296: South Oregon Coast Reinforcement Project, Coos Bay/North Bend, Oregon

    Broader source: Energy.gov [DOE]

    Bonneville Power Administration proposes to build a 500- kilovolt (kV) transmission line and new substation to reinforce electrical service to the southern coast of the state of Oregon. Nucor Steel, a division of Nucor Corporation, may build a new steel mill in the Coos Bay/North Bend, Oregon, area.

  13. Modified Timoshenko formula for bending of ultrathin strained bilayer films Ji Zang and Feng Liua

    E-Print Network [OSTI]

    Simons, Jack

    - tions, such as coating, epitaxial growth of thin films, and device interconnection.3­7 Recently, classical Timoshenko formula has been used to calculate the bending curvature or radius of rolledAs/InAs nano- tubes from rolling up released GaAs/InAs bilayer films of only a few MLs thick.11 Nanotubes

  14. Electromagnetic detection of plate hydration due to bending faults at the Middle America Trench

    E-Print Network [OSTI]

    Constable, Steve

    images show that the extensive network of trench parallel normal faults penetrates the entire oceanic bending faults on the incoming oceanic plate of the Middle America Trench offshore Nicaragua have been observed to penetrate to mantle depths, suggesting a permeable pathway for hydration of the crust

  15. Modeling Soil Quality Thresholds to Ecosystem Recovery at Fort Benning, Georgia, USA

    SciTech Connect (OSTI)

    Garten Jr., C.T.

    2004-03-08

    The objective of this research was to use a simple model of soil C and N dynamics to predict nutrient thresholds to ecosystem recovery on degraded soils at Fort Benning, Georgia, in the southeastern USA. The model calculates aboveground and belowground biomass, soil C inputs and dynamics, soil N stocks and availability, and plant N requirements. A threshold is crossed when predicted soil N supplies fall short of predicted N required to sustain biomass accrual at a specified recovery rate. Four factors were important to development of thresholds to recovery: (1) initial amounts of aboveground biomass, (2) initial soil C stocks (i.e., soil quality), (3) relative recovery rates of biomass, and (4) soil sand content. Thresholds to ecosystem recovery predicted by the model should not be interpreted independent of a specified recovery rate. Initial soil C stocks influenced the predicted patterns of recovery by both old field and forest ecosystems. Forests and old fields on soils with varying sand content had different predicted thresholds to recovery. Soil C stocks at barren sites on Fort Benning generally lie below predicted thresholds to 100% recovery of desired future ecosystem conditions defined on the basis of aboveground biomass (18000 versus 360 g m{sup -2} for forests and old fields, respectively). Calculations with the model indicated that reestablishment of vegetation on barren sites to a level below the desired future condition is possible at recovery rates used in the model, but the time to 100% recovery of desired future conditions, without crossing a nutrient threshold, is prolonged by a reduced rate of forest growth. Predicted thresholds to ecosystem recovery were less on soils with more than 70% sand content. The lower thresholds for old field and forest recovery on more sandy soils are apparently due to higher relative rates of net soil N mineralization in more sandy soils. Calculations with the model indicate that a combination of desired future conditions, initial levels of soil quality (defined by soil C stocks), and the rate of biomass accumulation determines the predicted success of ecosystem recovery on disturbed soils.

  16. Paleoecology and depositional environment of Fort Hays Limestone Member, Niobrara Chalk (Upper Cretaceous), west-central Kansas

    E-Print Network [OSTI]

    Frey, R. W.

    1972-05-12

    OF KANSAS PALEONTOLOGICAL CONTRIBUTIONS ARTICLE 58 (CRETACEOUS 3) PALEOECOLOGY AND DEPOSITIONAL ENVIRONMENT OF FORT HAYS LIMESTONE MEMBER, NIOBRARA CHALK (UPPER CRETACEOUS), WEST-CENTRAL KANSAS ROBERT W. FREY Department of Geology, University of Georgia..., Athens The University of Kansas Paleontological Institute THE UNIVERSITY OF KANSAS PUBLICATIONS MAY 12, 1972 THE UNIVERSITY OF KANSAS PALEONTOLOGICAL CONTRIBUTIONS Article 58 (Cretaceous 3), 72 Pages, 14 Figures, 15 Plates, 6 Tables PALEOECOLOGY...

  17. Regional analysis of rhythmic bedding in the Fort Hays limestone member, Niobrara Formation (Upper Cretaceous), US western interior

    SciTech Connect (OSTI)

    Laferriere, A.P.

    1987-01-01

    Results of a regional stratigraphic investigation of the rhythmically bedded Fort Hays limestone member of Kansas, Colorado, and New Mexico indicate at least two levels of cyclicity. Regional development of these cycles strongly supports the hypothesis that they are climatic in origin. Departures from simple cyclical patterns resulted from sedimentary effects of Late Cretaceous orogenic activity, erosional events associated with eustatic sea level changes, diagenetic modification, and possibly from interference between orbital parameters having different periodicities. The vulnerability of Milankovitch-type cyclicity to overprinting by tectono-sedimentologic effects makes units such as the Fort Hays useful as indicators of subtle tectonic activity. Regional thickness changes in groups of shale-limestone couplets were identified, correlated, and mapped in the subsurface using geophysical well log information in order to locate subtle structural elements that influenced Fort Hays sedimentation. In the Denver-Julesburg Basin of Colorado and western Kansas, thinning of the section between Fort Hays marker horizons occurs dominantly along northeastwardly trending belts that resulted apparently from Late Cretaceous reactivation of the Transcontinental Arch. Isotopic and petrographic analyses were conducted on pelagic (carbonate matrix) and benthic (inoceramid bivalve) constituents of selected shale/limestone couplets. These data suggest that there was little difference in temperature or salinity between times of terrigenous detrital input and times of nearly pure carbonate deposition. Isotopic information from matrix samples suggests a westward decrease in salinity of surface water in the Western Interior Sea. Isotopic data from largely unaltered inoceramid bivalves indicate bottom-water conditions of near-normal marine salinity.

  18. Community Environmental Response Facilitation Act (CERFA) report, Fort Benjamin Harrison, Indiana. Final report

    SciTech Connect (OSTI)

    Not Available

    1994-04-01

    Fort Benjamin Harrison (FBH) has been investigated by Arthur D. Little, Inc. under the Community Environmental Response Facilitation Act (CERFA). FBH is located 12 miles northeast of downtown Indianapolis, Indiana. The installation's mission includes administrative and training activities. The objective of CERFA is to expeditiously identify real property offering the greatest opportunity for immediate reuse and redevelopment. This investigation included interviews, visual inspections, and review of existing documents, regulatory records, data bases, and title documents. This information was used to divide the installation into four categories of parcels. CERFA parcels approximately 1,825 acres of the facility have no history of Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) regulated hazardous substance or petroleum product release, disposal, or storage. CERFA parcels with qualifiers approximately 78 acres had no evidence of such release, disposal, or storage, but contained non-CERCLA hazards, such as asbestos or radon. CERFA disqualified parcels for approximately 399 acres of the investigated areas there is a history of release, disposal, or storage for one year or more of CERCLA-regulated hazardous substances or petroleum products; and CERFA excluded parcels approximately 201 acres have an existing mandate for retention by the federal government or have already been designated for transfer.

  19. Electrical Energy and Demand Savings from a Geothermal Heat Pump ESPC at Fort Polk, LA

    SciTech Connect (OSTI)

    Shonder, John A; Hughes, Patrick

    1997-06-01

    At Fort Polk, Louisiana, the space-conditioning systems of an entire city (4,003 military family housing units) have been converted to geothermal heat pumps (GHPs) under an energy savings performance contract. At the same time, other efficiency measures, such as compact fluorescent lights, low-flow hot water outlets, and attic insulation, were installed. Pre- and post-retrofit data were taken at 15-minute intervals on energy flows through the electrical distribution feeders that serve the family housing areas of the post. Fifteen-minute interval data were also taken on energy use from a sample of the residences. The analysis presented in this paper shows that for a typical meteorological year, the retrofits result in an electrical energy savings of approximately 25.6 million kWh, or 32.4% of the pre-retrofit electrical use in family housing. Peak electrical demand has also been reduced by about 6.8 MW, which is 40% of pre-retrofit peak demand. In addition, the retrofits save about 260,000 therms per year of natural gas. It should be noted that the energy savings presented in this document are the 'apparent' energy savings observed in the monitored data and are not to be mistaken for the 'contracted' energy savings used as the basis for payments. To determine the 'contracted' energy savings, the 'apparent' energy savings may require adjustments for such things as changes in indoor temperature performance criteri, addition of ceiling fans, and other factors.

  20. A exact solution is presented for the cylindrical bending vibration of simply supported function-ally graded plates. Displacement functions that identically satisfy boundary conditions are used to

    E-Print Network [OSTI]

    Vel, Senthil

    ABSTRACT A exact solution is presented for the cylindrical bending vibration of simply supported-to-thickness ratios. Keywords: Functionally graded material; thick plate; cylindrical bending; vibration. INTRODUCTION for the Cylindrical Bending Vibration of Functionally Graded Plates S. S. VEL AND R. C. BATRA Proceedings

  1. Numerical analysis of a locking-free mixed finite element method for a bending moment formulation of Reissner-Mindlin plate model

    E-Print Network [OSTI]

    Rodríguez, Rodolfo

    ´on, Chile. This paper deals with the approximation of the bending of a clamped plate modeled by ReissnerNumerical analysis of a locking-free mixed finite element method for a bending moment formulation the thickness t is small. Here, we propose a new mixed formulation in terms of the bending moments, shear stress

  2. Curvature-Induced Bunch Self-Interaction for an Energy-Chirped Bunch in Magnetic Bends

    SciTech Connect (OSTI)

    Rui Li

    2006-01-04

    The curvature-induced bunch collective interaction in magnetic bends can be studied using effective forces in the canonical formulation of the coherent synchrotron radiation (CSR) effect. In this paper, for an electron distribution moving ultrarelativistically in a bending system, the dynamics of a particle in the electron distribution is derived from the Hamiltonian of the particle in terms of the bunch internal coordinates. The consequent Vlasov equation manifests explicitly how the phase space distribution is perturbed by the effective CSR forces. In particular, we study the impact of an initial linear energy chirp of the bunch on the behavior of the effective longitudinal CSR force, which arises due to the modification of the retardation relation as a result of the energy-chirping-induced longitudinal-horizontal correlation of the bunch distribution (bunch tilt) in dispersive regions.

  3. Light bending in the galactic halo by Rindler-Ishak method

    SciTech Connect (OSTI)

    Bhattacharya, Amrita; Nandi, Kamal K.; Isaev, Ruslan; Scalia, Massimo; Cattani, Carlo E-mail: subfear@gmail.com E-mail: ccattani@unisa.it

    2010-09-01

    After the work of Rindler and Ishak, it is now well established that the bending of light is influenced by the cosmological constant ? appearing in the Schwarzschild-de Sitter spacetime. We show that their method, when applied to the exact Mannheim-Kazanas-de Sitter solution of the Weyl conformal gravity, nicely yields the expected answer together with several other physically interesting new terms. Apart from ?, the solution is parametrized by a conformal parameter ?, which is known to play a dominant role in the galactic halo gravity. The application of the method yields exactly the same ?? correction to Schwarzschild bending as obtained by standard methods. Different cases are analyzed, which include some corrections to the special cases considered in the original paper by Rindler and Ishak.

  4. A new hydrocarbon empirical potential in angle bending calculation for the molecular dynamics simulation

    SciTech Connect (OSTI)

    Ping, Tan Ai; Hoe, Yeak Su

    2014-07-10

    Typically, short range potential only depends on neighbouring atoms and its parameters function can be categorized into bond stretching, angle bending and bond rotation potential. In this paper, we present our work called Angle Bending (AB) potential, whereas AB potential is the extension of our previous work namely Bond Stretching (BS) potential. Basically, potential will tend to zero after truncated region, potential in specific region can be represented by different piecewise polynomial. We proposed the AB piecewise potential which is possible to solve a system involving three atoms. AB potential able to handle the potential of covalent bonds for three atoms as well as two atoms cases due to its degeneracy properties. Continuity for the piecewise polynomial has been enforced by coupling with penalty methods. There are still plenty of improvement spaces for this AB potential. The improvement for three atoms AB potential will be studied and further modified into torsional potential which are the ongoing current research.

  5. Strain concentrations in pipelines with concrete coating full scale bending tests and analytical calculations

    SciTech Connect (OSTI)

    Verley, R.; Ness, O.B. [Statoil, Trondheim (Norway)

    1995-12-31

    This paper presents the results of full scale bending tests on 16 in. and 20 in. diameter, concrete coated pipes with polyethene and asphalt corrosion coatings. Constant moment, four-point bending was applied to a pipe string consisting of one pipe joint welded between two half-length joints. The strain concentration factor (SCF) at the field joints (FJ), expressing the ratio between the strain in the FJ and the average strain for the pipe joint, was investigated and compared to predictions using an analytical model presented in an accompanying paper (Ness and Verley, 1995). Material tests on the pipe steel, the corrosion coating and the concrete were conducted. The analytical model is found to give a good prediction of the strain distribution along the pipe joint, for both the steel and the concrete, and therefore also of the SCF. The sliding of the concrete over the steel is also predicted reasonably well.

  6. Methods and apparatus for twist bend coupled (TCB) wind turbine blades

    DOE Patents [OSTI]

    Moroz, Emilian Mieczyslaw; LeMieux, David Lawrence; Pierce, Kirk Gee

    2006-10-10

    A method for controlling a wind turbine having twist bend coupled rotor blades on a rotor mechanically coupled to a generator includes determining a speed of a rotor blade tip of the wind turbine, measuring a current twist distribution and current blade loading, and adjusting a torque of a generator to change the speed of the rotor blade tip to thereby increase an energy capture power coefficient of the wind turbine.

  7. Null trajectories and bending of light in charged black holes with quintessence

    E-Print Network [OSTI]

    Sharmanthie Fernando; Scott Meadows; Kevon Reis

    2015-06-15

    We have studied null geodesics of the charged black hole surrounded by quintessence. Quintessence is a candidate for dark energy and is represented by a scalar field. Here, we have done a detailed study of the photon trajectories. The exact solutions for the trajectories are obtained in terms of the Jacobi-elliptic integrals for all possible energy and angular momentum of the photons. We have also studied the bending angle using the Rindler and Ishak method.

  8. Folds above angular fault bends: mechanical constraints for backlimb trishear kinematic models 

    E-Print Network [OSTI]

    Zhang, Li

    2004-11-15

    for the degree of MASTER OF SCIENCE Approved as to style and content by: Judith S. Chester (Chair of Committee) Frederick M. Chester (Member) Charles P. Aubeny (Member) Andrew Hajash Jr. (Head of Department) August 2003 Major Subject: Geology iii ABSTRACT Folds... above Angular Fault Bends: Mechanical Constraints for Backlimb Trishear Kinematic Models. (August 2003) Li Zhang, B.E.; M.S., Southwest Petroleum Institute, P.R.China Chair of Advisory Committee: Dr. Judith S. Chester The backlimb trishear velocity eld...

  9. Limited site investigation of Landfills 1 and 4, Fort Lewis, Washington

    SciTech Connect (OSTI)

    Last, G.V.; Eddy, P.A.; Airhart, S.P.; Olsen, K.R.; Raymond, J.R.; Dahl, D.R.

    1990-08-01

    The information presented in this report was collected during limited site investigation activities conducted in the vicinity of Landfills 1 and 4 at Fort Lewis. The purpose of this work was to provide a means of detecting and evaluating the impacts of these inactive landfills on ground-water quality and adjacent lands. This effort included the design and construction of ground-water monitoring systems for compliance with applicable federal and state regulations governing Resource Conservation and Recovery Act (RCRA)-type landfills. Ground-water samples were collected from both existing (1981 and 1984) wells and the newly installed (1988) wells. The analytical results from the water samples indicate that the ground water in and around Landfill 1 contains limited contamination. Contaminants may include volatile organic compounds and nitrate. The primary concern in the area around Landfill 1 was the determination that ground water from two wells may contain cis-1,2-dichloroethylene and 1,1,1-trichloroethylene above drinking water standards. Nitrate levels in the downgradient wells were greater than those in upgradient wells and exceeded drinking water standards in some of the less-representative samples. Analyses of ground-water samples from wells in and around Landfill 4 indicate several contaminants may be present. These include volatile organic compounds (principally cis-1,2-dichloroethylene and 1,1,1-trichloroethylene), coliform, oil and grease, and perhaps some metals (iron and magnesium). The primary concern in the area around Landfill 4 was the determination that ground water from five wells contained cis-1,2-dichloroethylene and 1,1,1-trichloroethylene above drinking water standards. The source of contaminants beneath either landfill cannot yet be identified. Insufficient data exist to disprove or confirm either landfill as possible contributors. 19 refs., 32 figs., 17 tabs.

  10. Conceptual design report for handling Fort St. Vrain fuel element components

    SciTech Connect (OSTI)

    Gavalya, R.A.

    1993-09-01

    This report presents conceptual designs for containment of high-level wastes (HLW) and low-level wastes (LLW) that will result from disassembly of fuel elements from the High Temperature Gas-Cooled Reactor at the Fort St. Vrain nuclear power plant in Platteville, Colorado. Hexagonal fuel elements will enter the disassembly area as a HLW and exit as either as HLW or LLW. The HLW will consist of spent fuel compacts that have been removed from the hexagonal graphite block. Graphite dust and graphite particles produced during the disassembly process will also be routed to the container that will hold the HLW spent fuel compacts. The LLW will consist of the emptied graphite block. Three alternatives have been introduced for interim storage of the HLW containers after the spent fuel has been loaded. The three alternatives are: (a) store containers where fuel elements are currently being stored, (b) construct a new dry storage facility, and (c) employ Multi-Purpose Canisters (currently in conceptual design stage). Containment of the LLW graphite block will depend on several factors: (a) LLW classification, (b) radiation levels, and (c) volume-reducing technique (if used). Packaging may range from cardboard boxes for incinerable wastes to 55-ton cask inserts for remote-handled wastes. Before final designs for the containment of the HLW and LLW can be developed, several issues need to be addressed: (a) packing factor for fuel compacts in HLW container, (b) storage/disposal of loaded HLW containers, (c) characterization of the emptied graphite blocks, and (d) which technique for volume-reduction purposes (if any) will be used.

  11. Off-fault Damage Associated with a Localized Bend in the North Branch San Gabriel Fault, California 

    E-Print Network [OSTI]

    Becker, Andrew 1987-

    2012-08-15

    , such as bends and steps, are thought to affect earthquake rupture propagation and energy radiation, but the effects are not completely understood. We hypothesize that the rate of accumulation of new damage decreases as fault maturity increases, and damage...

  12. Collapsed Molecular Rectangles Based on Rhenium(I) Coordination of Ethynylpyridyl Porphyrins Synthesis, Structure, and Bending-Induced

    E-Print Network [OSTI]

    FULL PAPER Collapsed Molecular Rectangles Based on Rhenium(I) Coordination of Ethynylpyridyl Porphyrins Synthesis, Structure, and Bending-Induced Charge-Transfer Behavior Kurt D. Benkstein,[a] Charlotte

  13. Theoretical and experimental study of the bending influence on the capacitance of interdigitated micro-electrodes patterned on flexible substrates

    SciTech Connect (OSTI)

    Molina-Lopez, F.; Briand, D.; Rooij, N. F. de [Ecole Polytechnique Fédérale de Lausanne (EPFL) - Institute of Microengineering (IMT) – Sensors, Actuators and Microsystems Laboratory - SAMLAB, 2002 Neuchâtel (Switzerland); Kinkeldei, T.; Tröster, G. [Eidgenössische Technische Hochschule Zürich (ETHZ) – Electronics Laboratory, 8092 Zurich (Switzerland)

    2013-11-07

    Interdigitated electrodes are common structures in the fields of microelectronics and MEMS. Recent developments in flexible electronics compel an understanding of such structures under bending constraints. In this work, the behavior of interdigitated micro-electrodes when subjected to circular bending has been theoretically and experimentally studied through changes in capacitance. An analytical model has been developed to calculate the expected variation in capacitance of such structures while undergoing outward and inward bending along the direction perpendicular to the electrodes. The model combines conformal mapping techniques to account for the electric field redistribution and fundamental aspects of solid mechanics in order to define the geometrical deformation of the electrodes while bending. To experimentally verify our theoretical predictions, several interdigitated electrode structures with different geometries were fabricated on polymeric substrates by means of photolithography. The samples, placed in a customized bending setup, were bent to controlled radii of curvature while measuring their capacitance. A maximum variation in capacitance of less than 3% was observed at a minimum radius of curvature of 2.5?mm for all the devices tested with very thin electrodes whereas changes of up to 7% were found on stiffer, plated electrodes. Larger or smaller variations would be possible, in theory, by adjusting the geometry of the device. This work establishes a useful predictive tool for the design and evaluation of truly flexible/bendable electronics consisting of interdigitated structures, allowing one to tune the bending influence on the capacitance value through geometrical design.

  14. American Recovery and Reinvestment Act (ARRA) FEMP Technical Assistance U.S. Army Project 181 Implementation Challenges in Deployment of an Energy Security Microgrid for Army Reserve Facilities located on the Former Fort Devens Army Base

    SciTech Connect (OSTI)

    Warwick, William M.

    2010-09-30

    This documents reports on a request for technical assistance from Fort Devens to analyze procurement of energy from nearby renewable generating resources.

  15. On simple and accurate finite element models for nonlinear bending analysis of beams and plates 

    E-Print Network [OSTI]

    Urthaler Lapeira, Yetzirah Yksya

    2007-09-17

    –ce of Graduate Studies of Texas A&M University in partial fulflllment of the requirements for the degree of DOCTOR OF PHILOSOPHY Approved by: Chair of Committee, J.N. Reddy Committee Members, Steve Suh Harry Hogan Goong Chen Head of Department, Dennis O’Neal May... Bolivar Chair of Advisory Committee: Dr. J.N. Reddy This study is concerned with the development of simple and accurate alterna- tive flnite element models to displacement flnite element models for geometrically nonlinear bending analysis of beams...

  16. Control of Springback in Sheet Metal U-bending Through Design Experiment

    SciTech Connect (OSTI)

    Chirita, Bogdan; Brabie, Gheorghe

    2007-05-17

    For the U-bending of sheet metals, springback represents the most important failure mode that is affecting the parts. The purpose of this study was to develop a method for the reduction or the elimination of springback from the designing stage of the forming process. This paper describes a numerical procedure that combines simulation of springback by finite element method with a fractional factorial design and proposes the optimization of the forming parameters and tools geometry for the reduction of springback intensity. At the end of the study we were able to obtain an important improvement of part precision using the parameters predicted by the factorial design.

  17. American Recovery and Reinvestment Act (ARRA) Federal Energy Management Program Technical Assistance Project 282 Renewable Energy Opportunities at Fort Gordon, Georgia

    SciTech Connect (OSTI)

    Boyd, Brian K.; Gorrissen, Willy J.; Hand, James R.; Horner, Jacob A.; Orrell, Alice C.; Russo, Bryan J.; Weimar, Mark R.; Williamson, Jennifer L.; Nesse, Ronald J.

    2010-09-30

    This document provides an overview of renewable resource potential at Fort Gordon, based primarily upon analysis of secondary data sources supplemented with limited on-site evaluations. This effort focuses on grid-connected generation of electricity from renewable energy sources and also on ground source heat pumps for heating and cooling buildings. The effort was funded by the American Recovery and Reinvestment Act (ARRA) as follow-on to the 2005 Department of Defense (DoD) Renewables Assessment. The site visit to Fort Gordon took place on March 9, 2010.

  18. Molecular origin of the difference in the HOH bend of the IR spectra between liquid water and ice

    SciTech Connect (OSTI)

    Imoto, Sho; Xantheas, Sotiris S.; Saito, Shinji

    2013-02-07

    The intensity of the HOH bend in the IR spectrum of ice is significantly smaller than the corresponding one in liquid water. This difference in the IR intensities of the HOH bend in the two systems is investigated using MD simulations with the flexible, polarizable, ab-initio based TTM3-F model for water, a potential that correctly reproduces the experimentally observed increase of the HOH bend in liquid water and ice from the water monomer value. We have identified two factors that are responsible for the difference in the intensity of the HOH bend in liquid water and ice: (i) the decrease of the intensity of the HOH bend in ice caused by the strong anti-correlation between the permanent dipole moment of a molecule and the induced dipole moment of a neighboring hydrogen bond acceptor molecule and (ii) the weakening of this anti-correlation by the disordered hydrogen bond network in liquid water. The presence of the anti-correlation in ice is further confirmed by ab initio electronic structure calculations of water pentamer clusters extracted from the trajectories of the MD simulations for ice and liquid water.

  19. Combined Effects of Gravity, Bending Moment, Bearing Clearance, and Input Torque on Wind Turbine Planetary Gear Load Sharing: Preprint

    SciTech Connect (OSTI)

    Guo, Y.; Keller, J.; LaCava, W.

    2012-09-01

    This computational work investigates planetary gear load sharing of three-mount suspension wind turbine gearboxes. A three dimensional multibody dynamic model is established, including gravity, bending moments, fluctuating mesh stiffness, nonlinear tooth contact, and bearing clearance. A flexible main shaft, planetary carrier, housing, and gear shafts are modeled using reduced degrees-of-freedom through modal compensation. This drivetrain model is validated against the experimental data of Gearbox Reliability Collaborative for gearbox internal loads. Planet load sharing is a combined effect of gravity, bending moment, bearing clearance, and input torque. Influences of each of these parameters and their combined effects on the resulting planet load sharing are investigated. Bending moments and gravity induce fundamental excitations in the rotating carrier frame, which can increase gearbox internal loads and disturb load sharing. Clearance in carrier bearings reduces the bearing load carrying capacity and thus the bending moment from the rotor can be transmitted into gear meshes. With bearing clearance, the bending moment can cause tooth micropitting and can induce planet bearing fatigue, leading to reduced gearbox life. Planet bearings are susceptible to skidding at low input torque.

  20. The shape of the DNA minor groove directs binding by the DNA-bending protein Fis

    SciTech Connect (OSTI)

    Stella, Stefano; Cascio, Duilio; Johnson, Reid C.

    2010-06-21

    The bacterial nucleoid-associated protein Fis regulates diverse reactions by bending DNA and through DNA-dependent interactions with other control proteins and enzymes. In addition to dynamic nonspecific binding to DNA, Fis forms stable complexes with DNA segments that share little sequence conservation. Here we report the first crystal structures of Fis bound to high- and low-affinity 27-base-pair DNA sites. These 11 structures reveal that Fis selects targets primarily through indirect recognition mechanisms involving the shape of the minor groove and sequence-dependent induced fits over adjacent major groove interfaces. The DNA shows an overall curvature of {approx}65{sup o}, and the unprecedented close spacing between helix-turn-helix motifs present in the apodimer is accommodated by severe compression of the central minor groove. In silico DNA structure models show that only the roll, twist, and slide parameters are sufficient to reproduce the changes in minor groove widths and recreate the curved Fis-bound DNA structure. Models based on naked DNA structures suggest that Fis initially selects DNA targets with intrinsically narrow minor grooves using the separation between helix-turn-helix motifs in the Fis dimer as a ruler. Then Fis further compresses the minor groove and bends the DNA to generate the bound structure.

  1. Illumination of interior spaces by bended hollow light guides: Application of the theoretical light propagation method

    SciTech Connect (OSTI)

    Darula, Stanislav; Kocifaj, Miroslav; Kittler, Richard [ICA, Slovak Academy of Sciences, Bratislava (Slovakia); Kundracik, Frantisek [Department of Experimental Physics, FMPI, Comenius University, Bratislava (Slovakia)

    2010-12-15

    To ensure comfort and healthy conditions in interior spaces the thermal, acoustics and daylight factors of the environment have to be considered in the building design. Due to effective energy performance in buildings the new technology and applications also in daylight engineering are sought such as tubular light guides. These allow the transport of natural light into the building core reducing energy consumption. A lot of installations with various geometrical and optical properties can be applied in real buildings. The simplest set of tubular light guide consists of a transparent cupola, direct tube with high reflected inner surface and a ceiling cover or diffuser redistributing light into the interior. Such vertical tubular guide is often used on flat roofs. When the roof construction is inclined a bend in the light guide system has to be installed. In this case the cupola is set on the sloped roof which collects sunlight and skylight from the seen part of the sky hemisphere as well as that reflected from the ground and opposite facades. In comparison with the vertical tube some additional light losses and distortions of the propagated light have to be expected in bended tubular light guides. Recently the theoretical model of light propagation was already published and its applications are presented in this study solving illuminance distributions on the ceiling cover interface and further illuminance distribution on the working plane in the interior. (author)

  2. Reduction of Beam Emittance of Pep-X Using Quadruple Bend Achromat Cell

    SciTech Connect (OSTI)

    Wang, Min-Huey; Cai, Yunhai; Hettel, Robert; Nosochkov, Yuri; /SLAC

    2009-05-26

    SLAC National Accelerator Laboratory is studying an option of building a high brightness synchrotron light source machine, PEP-X, in the existing PEP-II tunnel [1, 2]. By replacing 6 arcs of FODO cells of PEPII High Energy Ring (HER) with two arcs of DBA and four arcs of TME and installation of 89.3 m long damping wiggler an ultra low beam emittance of 0.14 nm-rad (including intra-beam scattering) at 4.5 GeV is achieved. In this paper we study the possibility to further reduce the beam emittance by releasing the constraint of the dispersion free in the DBA straight. The QBA (Quadruple Bend Achromat) cell is used to replace the DBA. The ratio of outer and inner bending angle is optimized. The dispersion function in the non-dispersion straight is controlled to compromise with lower emittance and beam size at the dispersion straight. An undulator of period length 23 mm, maximum magnetic field of 1.053 T, and total periods of 150 is used to put in the 30 straights to simulate the effects of these IDs on the beam emittance and energy spread. The brightness including all the ID effects is calculated and compared to the original PEP-X design.

  3. Flow visualization study of inverted U-bend two-phase flow

    SciTech Connect (OSTI)

    Ishii, M.; Kim, S.B.; Lee, R.

    1986-12-01

    A hot-leg U-bend experiment was performed. The experimental condition simulated the two-phase flow in a B and W primary loop during a small break loss of coolant accident or during some other abnormal transients. The loop design was based on the scaling criteria developed previously and the loop was operated either in a natural circulation mode or in a forced circulation mode using nitrogen gas and water. The two-phase flow regimes at the hot-leg were identified on the basis of visual observation. The phase separation at the top of the inverted U-bend was observed at low gas flow rate. The void fractions were measured using differential pressure transducers and compared with the prediction from the drift-flux model. The natural circulation flow interruption occurred in two different modes, namely, quasi-periodic and semi-permanent modes. This phenomenon is mainly dependent on the difference in the hydrostatic head in the riser and downcomer, and the flow regime at hot-leg. Besides this flow interruption phenomenon, dynamic flow instabilities of considerable amplitudes have been observed.

  4. Suite of three protein crystallography beamlines with single superconducting bend magnet as the source

    SciTech Connect (OSTI)

    MacDowell, Alastair A.; Celestre, Richard S.; Howells, Malcolm; McKinney, Wayne; Krupnick, James; Cambie, Daniella; Domning, Edward E; Duarte, Robert M.; Kelez, Nicholas; Plate, David W.; Cork, Carl W.; Earnest, Thomas N.; Dickert, Jeffery; Meigs, George; Ralston, Corie; Holton, James M.; Alber, Thomas; Berger, James M.; Agard, David A.; Padmore, Howard A.

    2004-08-01

    At the Advanced Light Source (ALS), three protein crystallography (PX) beamlines have been built that use as a source one of the three 6 Tesla single pole superconducting bending magnets (superbends) that were recently installed in the ring. The use of such single pole superconducting bend magnets enables the development of a hard x-ray program on a relatively low energy 1.9 GeV ring without taking up insertion device straight sections. The source is of relatively low power, but due to the small electron beam emittance, it has high brightness. X-ray optics are required to preserve the brightness and to match the illumination requirements for protein crystallography. This was achieved by means of a collimating premirror bent to a plane parabola, a double crystal monochromator followed by a toroidal mirror that focuses in the horizontal direction with a 2:1 demagnification. This optical arrangement partially balances aberrations from the collimating and toroidal mirrors such that a tight focused spot size is achieved. The optical properties of the beamline are an excellent match to those required by the small protein crystals that are typically measured. The design and performance of these new beamlines are described.

  5. SiC-CMC-Zircaloy-4 Nuclear Fuel Cladding Performance during 4-Point Tubular Bend Testing

    SciTech Connect (OSTI)

    IJ van Rooyen; WR Lloyd; TL Trowbridge; SR Novascone; KM Wendt; SM Bragg-Sitton

    2013-09-01

    The U.S. Department of Energy Office of Nuclear Energy (DOE NE) established the Light Water Reactor Sustainability (LWRS) program to develop technologies and other solutions to improve the reliability, sustain the safety, and extend the life of current reactors. The Advanced LWR Nuclear Fuel Development Pathway in the LWRS program encompasses strategic research focused on improving reactor core economics and safety margins through the development of an advanced fuel cladding system. Recent investigations of potential options for “accident tolerant” nuclear fuel systems point to the potential benefits of silicon carbide (SiC) cladding. One of the proposed SiC-based fuel cladding designs being investigated incorporates a SiC ceramic matrix composite (CMC) as a structural material supplementing an internal Zircaloy-4 (Zr-4) liner tube, referred to as the hybrid clad design. Characterization of the advanced cladding designs will include a number of out-of-pile (nonnuclear) tests, followed by in-pile irradiation testing of the most promising designs. One of the out-of-pile characterization tests provides measurement of the mechanical properties of the cladding tube using four point bend testing. Although the material properties of the different subsystems (materials) will be determined separately, in this paper we present results of 4-point bending tests performed on fully assembled hybrid cladding tube mock-ups, an assembled Zr-4 cladding tube mock-up as a standard and initial testing results on bare SiC-CMC sleeves to assist in defining design parameters. The hybrid mock-up samples incorporated SiC-CMC sleeves fabricated with 7 polymer impregnation and pyrolysis (PIP) cycles. To provide comparative information; both 1- and 2-ply braided SiC-CMC sleeves were used in this development study. Preliminary stress simulations were performed using the BISON nuclear fuel performance code to show the stress distribution differences for varying lengths between loading points and clad configurations. The 2-ply sleeve samples show a higher bend momentum compared to those of the 1-ply sleeve samples. This is applicable to both the hybrid mock-up and bare SiC-CMC sleeve samples. Comparatively both the 1- and 2-ply hybrid mock-up samples showed a higher bend stiffness and strength compared with the standard Zr-4 mock-up sample. The characterization of the hybrid mock-up samples showed signs of distress and preliminary signs of fraying at the protective Zr-4 sleeve areas for the 1-ply SiC-CMC sleeve. In addition, the microstructure of the SiC matrix near the cracks at the region of highest compressive bending strain shows significant cracking and flaking. The 2-ply SiC-CMC sleeve samples showed a more bonded, cohesive SiC matrix structure. This cracking and fraying causes concern for increased fretting during the actual use of the design. Tomography was proven as a successful tool to identify open porosity during pre-test characterization. Although there is currently insufficient data to make conclusive statements regarding the overall merit of the hybrid cladding design, preliminary characterization of this novel design has been demonstrated.

  6. Device and method for measuring multi-phase fluid flow in a conduit having an abrupt gradual bend

    DOE Patents [OSTI]

    Ortiz, M.G.

    1998-02-10

    A system is described for measuring fluid flow in a conduit having an abrupt bend. The system includes pressure transducers, one disposed in the conduit at the inside of the bend and one or more disposed in the conduit at the outside of the bend but spaced a distance therefrom. The pressure transducers measure the pressure of fluid in the conduit at the locations of the pressure transducers and this information is used by a computational device to calculate fluid flow rate in the conduit. For multi-phase fluid, the density of the fluid is measured by another pair of pressure transducers, one of which is located in the conduit elevationally above the other. The computation device then uses the density measurement along with the fluid pressure measurements, to calculate fluid flow. 1 fig.

  7. Device and method for measuring multi-phase fluid flow in a conduit having an abrupt gradual bend

    DOE Patents [OSTI]

    Ortiz, Marcos German (Idaho Falls, ID)

    1998-01-01

    A system for measuring fluid flow in a conduit having an abrupt bend. The system includes pressure transducers, one disposed in the conduit at the inside of the bend and one or more disposed in the conduit at the outside of the bend but spaced a distance therefrom. The pressure transducers measure the pressure of fluid in the conduit at the locations of the pressure transducers and this information is used by a computational device to calculate fluid flow rate in the conduit. For multi-phase fluid, the density of the fluid is measured by another pair of pressure transducers, one of which is located in the conduit elevationally above the other. The computation device then uses the density measurement along with the fluid pressure measurements, to calculate fluid flow.

  8. Microstructure Development during High-Velocity Deformation P.J. FERREIRA, J.B. VANDER SANDE, M. AMARAL FORTES, and A. KYROLAINEN

    E-Print Network [OSTI]

    Ferreira, Paulo J.

    . AMARAL FORTES, and A. KYROLAINEN An austenitic stainless steel was deformed at high (103 s 1 ) strain the tendency for -martensite formation, and suppress the amount of -martensite. The increased presence to high strain rates due to their jump fre- quency. The suppression of -martensite can be explained

  9. 1998 * Tsou, M. and Buttenfield, B.P. Client/Server Components and Metadata Objects for Distributed Geographic Information Services. Proceedings, GIS/LIS '98, Fort Worth, TX,

    E-Print Network [OSTI]

    Tsou, Ming-Hsiang

    Geographic Information Services. Proceedings, GIS/LIS '98, Fort Worth, TX, November, 1998: 590-599. CLIENT management of geographic information is pushing the GIS community to establish an open GIS architecture/server components underlie specification of task-oriented programming, and the modularization of GIS software

  10. NOx, SOx and CO2 Emissions Reduction from Continuous Commissioning® (CC®) Measures at the Rent-A-Car Facility in the Dallas-Fort Worth International Airport 

    E-Print Network [OSTI]

    Baltazar-Cervantes, J. C.; Haberl, J. S.; Yazdani, B.

    2006-10-27

    The Energy Systems Laboratory (ESL) at the Texas Engineering Experiment Station, Texas A&M University System was contracted to fulfill a Continuous Commissioning® (CC®)project on the Rent-a-Car facility (RAC) of the Dallas-Fort Worth International...

  11. ION GNSS 2006, Fort Worth TX, 26-29 September 2006 1/14 Integrated GPS/INS System for Pedestrian Navigation in a

    E-Print Network [OSTI]

    Calgary, University of

    ION GNSS 2006, Fort Worth TX, 26-29 September 2006 1/14 Integrated GPS/INS System for Pedestrian research is focused on integrated IMU/GPS navigation systems for pedestrian and vehicular navigation. Dr evaluates the performance of a shoe/foot mounted inertial system for pedestrian navigation application. Two

  12. Preliminary assessment report for Fort William Henry Harrison, Montana Army National Guard, Helena, Montana. Installation Restoration Program

    SciTech Connect (OSTI)

    DuWaldt, J.; Meyer, T.

    1993-07-01

    This report presents the results of the preliminary assessment (PA) conducted by Argonne National Laboratory at a Montana Army National Guard (MTARNG) property near Helena, Montana. Preliminary assessments of federal facilities are being conducted to compile the information necessary for completing preremedial activities and to provide a basis for establishing corrective actions in response to releases of hazardous substances. The principal objective of the PA is to characterize the site accurately and determine the need for further action by examining site activities, quantities of hazardous substances present, and potential pathways by which contamination could affect public health and the environment. This PA satisfies, for the Fort William Henry Harrison property, requirements of the Department of Defense Installation Restoration Program.

  13. Comparison of practical vertical ground heat exchanger sizing methods to a Fort Polk data/model benchmark

    SciTech Connect (OSTI)

    Thornton, J.W.; McDowell, T.P.; Hughes, P.J.

    1997-09-01

    The results of five practical vertical ground heat exchanger sizing programs are compared against a detailed simulation model that has been calibrated to monitored data taken from one military family housing unit at Fort Polk, Louisiana. The calibration of the detailed model to data is described in a companion paper. The assertion that the data/detailed model is a useful benchmark for practical sizing methods is based on this calibration. The results from the comparisons demonstrate the current level of agreement between vertical ground heat exchanger sizing methods in common use. It is recommended that the calibration and comparison exercise be repeated with data sets from additional sites in order to build confidence in the practical sizing methods.

  14. Transmission spectra of a double-clad fibre structure under bending

    SciTech Connect (OSTI)

    Zlodeev, I V; Ivanov, Oleg V

    2013-06-30

    We have studied a fibre-optic structure whose operation relies on conversion of core and cladding modes that are coupled across the interface between two fibres differing in refractive index profile. The structure contains a section of an SM630 double-clad, small-core, single-mode fibre inserted between two SMF-28 standard fibres. We have measured the transmission spectrum of the structure when the SM630 fibre was bent and analysed the mode structure of the double-clad fibre and the origin of dips in its transmission spectrum. The resonance dips have been found to shift to longer wavelengths with increasing fibre curvature. We have evaluated the shift as a function of the length of the inserted fibre, its bend direction and the nature of the input fibre. (fiber optics)

  15. Transfer of optical signals around bends in two-dimensional linear photonic networks

    E-Print Network [OSTI]

    Georgios M. Nikolopoulos

    2014-11-13

    The ability to navigate light signals in two-dimensional networks of waveguide arrays is a prerequisite for the development of all-optical integrated circuits for information processing and networking. In this article, we present a theoretical analysis of bending losses in linear photonic lattices with engineered couplings, and discuss possible ways for their minimization. In contrast to previous work in the field, the lattices under consideration operate in the linear regime, in the sense that discrete solitons cannot exist. The present results suggest that the functionality of linear waveguide networks can be extended to operations that go beyond the recently demonstrated point-to-point transfer of signals, such as blocking, routing, logic functions, etc.

  16. Some new schemes for producing high-accuracy elliptical X-ray mirrors by elastic bending

    SciTech Connect (OSTI)

    Padmore, H.A.; Howells, M.R.; Irick, S.; Renner, T.; Sandler, R.; Koo, Y.-M.

    1996-08-01

    Although x-ray micro-foci can be produced by a variety of diffractive methods, grazing incidence mirrors are the only route to an achromatic focus. In this paper we describe our efforts to produce elliptically shaped mirrors with the very high figure accuracy necessary for producing a micro-focus. The motivation for this work is provided by the need to produce achromatic foci for a range of applications ranging from tunable micro-focus x-ray photoelectron spectroscopy ({mu}-XPS) at soft x-ray energies to micro-focus white beam x-ray diffraction ({mu}-XRD) at hard x-ray energies. We describe the methodology of beam bending, a practical example of a system we have produced for {mu}-XRD, and results demonstrating the production of a surface with micro-radian figure accuracy.

  17. Homoclinic snaking in plane Couette flow: bending, skewing, and finite-size effects

    E-Print Network [OSTI]

    Gibson, John F

    2015-01-01

    Invariant solutions of shear flows have recently been extended from spatially periodic solutions in minimal flow units to spatially localized solutions on extended domains. One set of spanwise-localized solutions of plane Couette flow exhibits homoclinic snaking, a process by which steady-state solutions grow additional structure smoothly at their fronts when continued parametrically. Homoclinic snaking is well understood mathematically in the context of the one-dimensional Swift-Hohenberg equation. Consequently, the snaking solutions of plane Couette flow form a promising connection between the largely phenomenological study of laminar-turbulent patterns in viscous shear flows and the mathematically well-developed field of pattern-formation theory. In this paper we present a numerical study of the snaking solutions, generalizing beyond the fixed streamwise wavelength of previous studies. We find a number of new solution features, including bending, skewing, and finite-size effects. We show that the finite-si...

  18. Device and method for measuring fluid flow in a conduit having a gradual bend

    DOE Patents [OSTI]

    Ortiz, M.G.; Boucher, T.J.

    1998-11-10

    A system is described for measuring fluid flow in a conduit having a gradual bend or arc, and a straight section. The system includes pressure transducers, one or more disposed in the conduit on the outside of the arc, and one disposed in the conduit in a straight section thereof. The pressure transducers measure the pressure of fluid in the conduit at the locations of the pressure transducers and this information is used by a computational device to calculate fluid flow rate in the conduit. For multi-phase fluid, the density of the fluid is measured by another pair of pressure transducers, one of which is located in the conduit elevationally above the other. The computation device then uses the density measurement along with the fluid pressure measurements, to calculate fluid flow. 1 fig.

  19. Device and method for measuring fluid flow in a conduit having a gradual bend

    DOE Patents [OSTI]

    Ortiz, Marcos German (Idaho Falls, ID); Boucher, Timothy J (Helena, MT)

    1998-01-01

    A system for measuring fluid flow in a conduit having a gradual bend or arc, and a straight section. The system includes pressure transducers, one or more disposed in the conduit on the outside of the arc, and one disposed in the conduit in a straight section thereof. The pressure transducers measure the pressure of fluid in the conduit at the locations of the pressure transducers and this information is used by a computational device to calculate fluid flow rate in the conduit. For multi-phase fluid, the density of the fluid is measured by another pair of pressure transducers, one of which is located in the conduit elevationally above the other. The computation device then uses the density measurement along with the fluid pressure measurements, to calculate fluid flow.

  20. Mechanically Programmable Bend Radius for Fiber-Reinforced Soft Kevin C. Galloway1, Panagiotis Polygerinos2, Conor J. Walsh3, and Robert J. Wood4

    E-Print Network [OSTI]

    Wood, Robert

    guidelines exist for achieving a variety of motions with soft actuators such as bending, contraction, extension, and twisting. These guidelines typically involve multi-step molding of composite materials swells radially and contracts lengthwise upon pressurization to shorten the overall length [5]. A bending

  1. Transport in microdroplets via channel bends Physics of Fluids (in press, 2015) Quantifying transport within a two-cell microdroplet induced by circular and sharp

    E-Print Network [OSTI]

    Balasuriya, Sanjeeva

    Transport in microdroplets via channel bends Physics of Fluids (in press, 2015) Quantifying transport within a two-cell microdroplet induced by circular and sharp channel bends Sanjeeva Balasuriya1 the role of piecewise circular or straight channel boundaries on the transport within a two

  2. This document contains the draft version of the following paper: S.K. Gupta and D.A. Bourne. Sheet metal bending: Generating shared setups.

    E-Print Network [OSTI]

    Gupta, Satyandra K.

    This document contains the draft version of the following paper: S.K. Gupta and D.A. Bourne. Sheet metal bending: Generating shared setups. ASME Journal of Manufacturing Science and Engineering, 121 Dr. S.K. Gupta (skgupta@umd.edu). #12;Sheet Metal Bending: Generating Shared Setups Satyandra K

  3. This document contains the draft version of the following paper: S.K. Gupta and D. Rajagopal. Sheet metal bending: Forming part families for

    E-Print Network [OSTI]

    Gupta, Satyandra K.

    This document contains the draft version of the following paper: S.K. Gupta and D. Rajagopal. Sheet metal bending: Forming part families for shared setup generation. Journal of Manufacturing Systems, 21 Dr. S.K. Gupta (skgupta@umd.edu). #12;Sheet Metal Bending: Forming Part Families for Generating

  4. This document contains the draft version of the following paper: U. Alva and S.K. Gupta. Automated design of sheet metal punches for bending

    E-Print Network [OSTI]

    Gupta, Satyandra K.

    part. The flat part needs to be bent along the bend lines to create the final part. In this paper, weThis document contains the draft version of the following paper: U. Alva and S.K. Gupta. Automated design of sheet metal punches for bending multiple parts in a single setup. Robotics and Computer

  5. Design Parameters for a 7.2 Tesla Bending Magnet for a 1.5 GeV Compact Light Source

    E-Print Network [OSTI]

    Green, M.A.

    2011-01-01

    a Central Induction of 7 tesla [l] D. B. Cline A. A. Gmen.Design Parameters for a 7.2 Tesla Bending Magnet for a 1.5Design Parameters for a 7.2 Tesla Bending Magnet for a 1.5

  6. Deformation of polymer lms by bending forces Gerald Patzold , Thorsten Hapke, Andreas Linke, and Dieter W. Heermann

    E-Print Network [OSTI]

    Heermann, Dieter W.

    Deformation of polymer lms by bending forces Gerald Patzold , Thorsten Hapke, Andreas Linke (July 15, 1996) Abstract We study the deformation of nano{scale polymer lms which are subject characterization of deformed states for such lms. We resolve the kinetic and the dynamic stage of the deformation

  7. 286 OPTICS LETTERS / Vol. 26, No. 5 / March 1, 2001 Quantitative analysis of bending efficiency in photonic-crystal

    E-Print Network [OSTI]

    -loss optical waveguide bend is a key component for building future integrated photonic circuits. A conventional, Sandia National Laboratories, P.O. Box 5800, Albuquerque, New Mexico 87185 S. G. Johnson and J. D designed line defect in a photonic- crystal structure, a guiding band can be created within the photonic

  8. Fast Response No-Bias-Bend LCD F. S. Y. Yeung, Y. W. Li and H. S. Kwok

    E-Print Network [OSTI]

    Fast Response No-Bias-Bend LCD F. S. Y. Yeung, Y. W. Li and H. S. Kwok Center for Display Research, Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong ABSTRACT Fast for fast switching applications [6-10]. Its response time can be very fast since there is no backflow

  9. In-situ scanning electron microscopy study of fracture events during back-end-of-line microbeam bending tests

    SciTech Connect (OSTI)

    Vanstreels, K. Zahedmanesh, H.; Bender, H.; Gonzalez, M.; De Wolf, I.; Lefebvre, J.; Bhowmick, S.

    2014-11-24

    This paper demonstrates the direct observation of crack initiation, crack propagation, and interfacial delamination events during in-situ microbeam bending tests of FIB milled BEOL structures. The elastic modulus and the critical force of fracture of the BEOL beam samples were compared for beams of different length and width.

  10. Would Tondu power plant trade health for jobs? From the August 28, 2005, issue of the South Bend Tribune

    E-Print Network [OSTI]

    Shrader-Frechette, Kristin

    's benefits, it may not be clean enough for "Cancer Alley." Its costs and experimental nature may make using such as ours. DOE says sulfuric acid releases from the American Electric Power "clean coal" plant in CheshireWould Tondu power plant trade health for jobs? From the August 28, 2005, issue of the South Bend

  11. The bending and dynamic mechanical properties of cortical bone: the effects of sodium fluoride and the relationship to physical properties 

    E-Print Network [OSTI]

    McCurdy-Rahn, Megan Calista

    1998-01-01

    treatment reduced the dynamic storage and three-point bending moduli, the yield and ultimate strengths, and ratio of yield to ultimate strength. This protocol also increased the tan 8, loss modulus, energy absorbed to failure, and percent of energy absorbed...

  12. Vegetation patterns of Pine Canyon, Big Bend National Park, Texas, in relation to elevation and slope aspect 

    E-Print Network [OSTI]

    Harris, Bryan Joseph

    1997-01-01

    Data on the woody vegetation of Pine Canyon, Big Bend National Park, Texas was gathered on an elevational gradient from 1250 m to 2000 m elevation using the point-centered quarter method. Sampling was conducted at 12 sites at 1250 m, 1500 m, 1625 m...

  13. Dolphins swim by rhythmically bending a variably flexible beam their vertebral column. With the evolution of fully

    E-Print Network [OSTI]

    Long Jr., John H.

    Dolphins swim by rhythmically bending a variably flexible beam ­ their vertebral column. With the evolution of fully aquatic swimming behavior, the vertebral column of cetaceans has undergone comprehensive with terrestrial mammals, vertebral columns with reduced thoracic spinous processes, unfused and lengthened sacral

  14. Reversible Bending Fatigue Test System for Investigating Vibration Integrity of Spent Nuclear Fuel during Transportation

    SciTech Connect (OSTI)

    Wang, Jy-An John; Wang, Hong; Bevard, Bruce Balkcom; Howard, Rob L; Flanagan, Michelle

    2013-01-01

    Transportation packages for spent nuclear fuel (SNF) must meet safety requirements under normal and accident conditions as specified by federal regulations. During transportation, SNF experiences unique conditions and challenges to cladding integrity due to the vibrational and impact loading during road or rail shipment. Oak Ridge National Laboratory (ORNL) has been developing testing capabilities that can be used to improve the understanding of the impacts on SNF integrity due to vibration loading, especially for high burn-up SNF in normal transportation operation conditions. This information can be used to meet the nuclear industry and U.S. Nuclear Regulatory Commission needs in the area of safety and security of spent nuclear fuel storage and transport operations. The ORNL developed test system can perform reversible-bending fatigue testing to evaluate both the static and dynamic mechanical response of SNF rods under simulated loads. The testing apparatus is also designed to meet the challenges of hot-cell operation, including remote installation and detachment of the SNF test specimen, in-situ test specimen deformation measurement, and implementation of a driving system suitable for use in a hot cell. The system contains a U-frame set-up equipped with uniquely designed grip rigs, to protect SNF rod and to ensure valid test results, and use of 3 specially designed LVDTs to obtain the in-situ curvature measurement. A variety of surrogate test rods have been used to develop and calibrate the test system as well as in performing a series of systematic cyclic fatigue tests. The surrogate rods include stainless steel (SS) cladding, SS cladding with cast epoxy, and SS cladding with alumina pellets inserts simulating fuel pellets. Testing to date has shown that the interface bonding between the SS cladding and the alumina pellets has a significant impact on the bending response of the test rods as well as their fatigue strength. The failure behaviors observed from tested surrogate rods provides a fundamental understanding of the underlying failure mechanisms of the SNF surrogate rod under vibration which has not been achieved previously. The newly developed device is scheduled to be installed in the hot-cell in summer 2013 to test high burnup SNF.

  15. Goos-Hänchen effect and bending of spin wave beams in thin magnetic films

    SciTech Connect (OSTI)

    Gruszecki, P. Krawczyk, M.; Romero-Vivas, J.; Dadoenkova, Yu. S.; Dadoenkova, N. N.; Lyubchanskii, I. L.

    2014-12-15

    For magnon spintronic applications, the detailed knowledge of spin wave (SW) beam dispersion, transmission (reflection) of SWs passing through (reflected from) interfaces, or borders or the scattering of SWs by inhomogeneities is crucial. These wave properties are decisive factors on the usefulness of a particular device. Here, we demonstrate, using micromagnetic simulations supported by an analytical model, that the Goos-Hänchen (GH) shift exists for SW reflecting from thin film edge and that with the effect becomes observable. We show that this effect will exist for a broad range of frequencies in the dipole-exchange range, with the magnetization degree of pinning at the film edge as the crucial parameter, whatever its nature. Moreover, we have also found that the GH effect can be accompanied or even dominating by a bending of the SW beam due to the inhomogeneity of the internal magnetic field. This inhomogeneity, created by demagnetizing field taking place at the film edge, causes gradual change of SWs refractive index. The refraction of the SW beams by the non-uniformity of the magnetic field enables the exploration of graded index magnonics and metamaterial properties for the transmission and processing of information at nanoscale.

  16. Ultrahigh strain-rate bending of copper nanopillars with laser-generated shock waves

    SciTech Connect (OSTI)

    Colorado, H. A.; Department of Mechanical Engineering, Universidad de Antioquia, Medellin ; Navarro, A.; Prikhodko, S. V.; Yang, J. M.; Ghoniem, N.; Gupta, V.; Department of Mechanical and Aerospace Engineering, University of California Los Angeles, Los Angeles, California 90095

    2013-12-21

    An experimental study to bend FIB-prepared cantilevered single crystal Cu nanopillars of several hundred nanometers in diameter and length at ultrahigh strain rate is presented. The deformation is induced by laser-generated stress waves, resulting in local strain rates exceeding 10{sup 7} s{sup ?1}. Loading of nano-scale Cu structures at these extremely short loading times shows unique deformation characteristics. At a nominal stress value of 297 MPa, TEM examination along with selected area electron diffraction characterization revealed that twins within the unshocked Cu pillars interacted with dislocations that nucleated from free surfaces of the pillars to form new subgrain boundaries. MD simulation results were found to be consistent with the very low values of the stress required for dislocation activation and nucleation because of the extremely high surface area to volume ratio of the nanopillars. Specifically, simulations show that the stress required to nucleate dislocations at these ultrahigh strain rates is about one order of magnitude smaller than typical values required for homogeneous nucleation of dislocation loops in bulk copper single crystals under quasi-static conditions.

  17. Fracture behavior of ceramic laminates in bending-I. Modeling of crack propagation

    SciTech Connect (OSTI)

    Phillipps, A.J.; Clegg, W.J.; Clyne, T.W. . Dept. of Materials Science and Metallurgy)

    1993-03-01

    This paper concerns the fracture behavior of specimens made up of ceramic sheets, separated by thin interlayers, which act to deflect cracks and thus to prevent catastrophic failure of the specimen. The treatment is divided into two parts. In this paper, the behavior of this type of material during bending is quantitatively modeled. The model is based on through-thickness cracks propagating when a critical stress is reached and interfacial cracks then advancing a distance dictated by the available energy. The variation in laminae strengths is modeled using a Monte Carlo method to determine the strength of successive laminae for a given Weibull modulus. The model is used to predict load/displacement plots and to explore the effects of changes in loading geometry and specimen variables, including Young's modulus, lamina strength, loading span, interfacial toughness, as well as lamina and sample thickness. A distinction is drawn between the energy actually absorbed in causing complete failure of the specimen as measured from the area under the load/displacement curve, and the amount of energy necessary to cause the crack propagation which occurred. These differ if the energy available to drive the interfacial cracks is more than sufficient for them to reach the ends of the specimen or if energy is dissipated elsewhere in the system. A criterion is derived by which specimens can be designed so as to minimize the difference between these two quantities. The significance of this concept in optimizing the toughness of these laminated materials is briefly discussed.

  18. Bending response of 3-D woven and braided preform composite materials

    SciTech Connect (OSTI)

    Pochiraju, K.; Parvizi-Majidi, A.; Chou, T.W.; Shah, B.

    1994-12-31

    Three dimensional textile carbon-epoxy composites exhibit general anisotropy. Further, these materials may possess different modulus in uniaxial tension than that in compression. In an earlier material characterization effort, the tension, compression, and shear properties of these composites were determined. In this paper, theoretical modeling of flexure of the textile composites and experimental correlation are presented. Four point bending tests were conducted according to STM D709 standards to determine the load to mid-span deflection relationships for typical textile composites. The results of experimental analysis are compared with classical beam theory, theory of elasticity solutions considering material orthotropy and shear deflection, and finite element analysis considering material orthotropy and finite deformation/rotations. The derivation of a harmonic function, required for the theory of elasticity solution, is described in the paper. Homogeneous orthotropic elastic properties are assumed for the 3-D textile composites, which is a reasonable approximation for specimens considerably larger than the repeated geometric unit of the fiber preform. The so called ``flex modulus`` is determined from the experimental data.

  19. Piezoresistive characterization of bottom-up, n-type silicon microwires undergoing bend deformation

    SciTech Connect (OSTI)

    McClarty, Megan M.; Oliver, Derek R. E-mail: Derek.Oliver@umanitoba.ca; Bruce, Jared P.; Freund, Michael S. E-mail: Derek.Oliver@umanitoba.ca

    2015-01-12

    The piezoresistance of silicon has been studied over the past few decades in order to characterize the material's unique electromechanical properties and investigate their wider applicability. While bulk and top-down (etched) micro- and nano-wires have been studied extensively, less work exists regarding bottom-up grown microwires. A facile method is presented for characterizing the piezoresistance of released, phosphorus-doped silicon microwires that have been grown, bottom-up, via a chemical vapour deposition, vapour-liquid-solid process. The method uses conductive tungsten probes to simultaneously make electrical measurements via direct ohmic contact and apply mechanical strain via bend deformation. These microwires display piezoresistive coefficients within an order of magnitude of those expected for bulk n-type silicon; however, they show an anomalous response at degenerate doping concentrations (?10{sup 20?}cm{sup ?3}) when compared to lower doping concentrations (?10{sup 17?}cm{sup ?3}), with a stronger piezoresistive coefficient exhibited for the more highly doped wires. This response is postulated to be due to the different growth mechanism of bottom-up microwires as compared to top-down.

  20. Seasonal Price Change and Costs of Storing Grain Sorghum in the Coastal Bend

    E-Print Network [OSTI]

    Whitney, Howard S.; Moore, Clarence A.

    1957-01-01

    .369 14,532 2,302 2,858 3.386 4,740 1,382 2,992 14.355 33,574 10.660 9,905 7,181 8,224 7,295 24,161 95,410 132,506 8,379 11,726 65,763 68,048 2.957 7,261 227,679 321,262 Coastal Bend, the marketing season in this study begins in June and ends....19 2.30 2.38 2.42 2.48 2.54 2.48 2.64 2.61 2.66 Range: high 3.41 3.17 2.82 3.12 3.21 3.36 3.68 3.79 3.09 3.60 3.68 3.58 low 1.99 1.71 1.52 1.66 1.47 1.72 1.86 1.93 2.04 2.00 2.05 2.09 Absolute range 1.42 1.46 1.30 1.46 1.74 1.64 1.82 1.86 - 1.05 1...

  1. Finite element modeling of concentrating solar collectors for evauation of gravity loads, bending, and optical characterization.

    SciTech Connect (OSTI)

    Christian, Joshua M.; Ho, Clifford Kuofei

    2010-04-01

    Understanding the effects of gravity and wind loads on concentrating solar power (CSP) collectors is critical for performance calculations and developing more accurate alignment procedures and techniques. This paper presents a rigorous finite-element model of a parabolic trough collector that is used to determine the impact of gravity loads on bending and displacements of the mirror facets and support structure. The geometry of the LUZ LS-2 parabolic trough collector was modeled using SolidWorks, and gravity-induced loading and displacements were simulated in SolidWorks Simulation. The model of the trough collector was evaluated in two positions: the 90{sup o} position (mirrors facing upward) and the 0{sup o} position (mirrors facing horizontally). The slope errors of the mirror facet reflective surfaces were found by evaluating simulated angular displacements of node-connected segments along the mirror surface. The ideal (undeformed) shape of the mirror was compared to the shape of the deformed mirror after gravity loading. Also, slope errors were obtained by comparing the deformed shapes between the 90{sup o} and 0{sup o} positions. The slope errors resulting from comparison between the deformed vs. undeformed shape were as high as {approx}2 mrad, depending on the location of the mirror facet on the collector. The slope errors resulting from a change in orientation of the trough from the 90{sup o} position to the 0{sup o} position with gravity loading were as high as {approx}3 mrad, depending on the location of the facet.

  2. Polarization measurement and vertical aperture optimization for obtaining circularly polarized bend-magnet radiation

    SciTech Connect (OSTI)

    Kortright, J.; Rice, M.; Hussain, Z.; Padmore, H.; Adamson, A.; Huff, W.; Young, A.; Moler, E.; Kellar, S.; Ynzunza, R.; Palomares, F.; Daimon, H.; Tober, E.; Fadley, C. [Center for X-Ray Optics, Advanced Light Source, Chemical Sciences Division, Materials Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States)] [Center for X-Ray Optics, Advanced Light Source, Chemical Sciences Division, Materials Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States); [Physics Department, University of California-Davis, Davis, CA 95616 (United States); [Department of Material Physics, Osaka University, Osaka (Japan)

    1996-09-01

    Using multilayer linear polarizers, we have characterized the polarization state of radiation from bend-magnet beamline 9.3.2 at the Advanced Light Source as a function of vertical opening angle at photon energies of 367 and 722 eV. Both a fine slit and a coarse semi-aperture were stepped across the beam to accept different portions of the vertical radiation fan. Polarimetry yields the degree of linear polarization directly and the degree of circular polarization indirectly assuming an immeasurably small amount of unpolarized radiation based on the close agreement of the theoretical and experimental results for linear polarization. The results are in good agreement with theoretical calculations, with departures from theory resulting from uncertainty in the effective aperture of the measured beam. The narrow 0.037-mrad aperture on the orbit plane transmits a beam whose degree of linear polarization exceeds 0.99 at these energies. The wide semi-aperture blocking the beam from above and below transmits a beam with a maximum figure of merit, given by the square root of flux times the degree of circular polarization, when the aperture edge is on the orbit plane thus blocking only half of the total available flux. {copyright} {ital 1996 American Institute of Physics.}

  3. Bending Frustration of Lipid-Water Mesophases Based on Cubic Minimal Surfaces

    E-Print Network [OSTI]

    U. S. Schwarz; G. Gompper

    2001-02-26

    Inverse bicontinuous cubic phases are ubiquitous in lipid-water mixtures and consist of a lipid bilayer forming a cubic minimal surface, thereby dividing space into two cubic networks of water channels. For small hydrocarbon chain lengths, the monolayers can be modeled as parallel surfaces to a minimal midsurface. The bending energy of the cubic phases is determined by the distribution of Gaussian curvature over the minimal midsurfaces which we calculate for seven different structures (G, D, P, I-WP, C(P), S and F-RD). We show that the free-energy densities of the structures G, D and P are considerably lower than those of the other investigated structures due to their narrow distribution of Gaussian curvature. The Bonnet transformation between G, D, and P implies that these phases coexist along a triple line, which also includes an excess water phase. Our model includes thermal membrane undulations. Our qualitative predictions remain unchanged when higher order terms in the curvature energy are included. Calculated phase diagrams agree well with the experimental results for 2:1 lauric acid/dilauroyl phosphatidylcholine and water.

  4. Technical and regulatory review of the Rover nuclear fuel process for use on Fort St. Vrain fuel

    SciTech Connect (OSTI)

    Hertzler, T.

    1993-02-01

    This report describes the results of an analysis for processing and final disposal of Fort St. Vrain (FSV) irradiated fuel in Rover-type equipment or technologies. This analysis includes an evaluation of the current Rover equipment status and the applicability of this technology in processing FSV fuel. The analyses are based on the physical characteristics of the FSV fuel and processing capabilities of the Rover equipment. Alternate FSV fuel disposal options are also considered including fuel-rod removal from the block, disposal of the empty block, or disposal of the entire fuel-containing block. The results of these analyses document that the current Rover hardware is not operable for any purpose, and any effort to restart this hardware will require extensive modifications and re-evaluation. However, various aspects of the Rover technology, such as the successful fluid-bed burner design, can be applied with modification to FSV fuel processing. The current regulatory climate and technical knowledge are not adequately defined to allow a complete analysis and conclusion with respect to the disposal of intact fuel blocks with or without the fuel rods removed. The primary unknowns include the various aspects of fuel-rod removal from the block, concentration of radionuclides remaining in the graphite block after rod removal, and acceptability of carbon in the form of graphite in a high level waste repository.

  5. Fort Devens: Cold Climate Market-Rate Townhomes Targeting HERS Index of 40, Harvard, Massachusetts (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-11-01

    Achieving aggressive energy efficiency targets requires tight coordination and clear communication among owners, designers, builders, and subcontractors. For this townhome project, MassDevelopment, the quasi-governmental agency owner, selected Metric Development of Boston, teaming with the U.S. Department of Energy (DOE) Consortium for Advanced Residential Buildings (CARB) and Cambridge Seven Architects, to build very high performing market-rate homes. Fort Devens is part of a decommissioned army base in working-class Harvard, Massachusetts, approximately one hour northwest of Boston. The team proposed 12 net zero energy-ready townhomes, meaning that the application of renewable energy systems would result in annual net zero energy use in the homes. The homes were also designed to achieve a Home Energy Rating System (HERS) Index Score of 41 before adding renewables. For this project, CARB drew on its experience working with Rural Development Inc. on a series of affordable townhomes in northern Massachusetts. The team carefully planned the site to maximize solar access, daylighting, and efficient building forms. The basic strategy was to design a very efficient thermal enclosure while minimizing incremental cost increases compared with standard construction. Using BEopt modeling software, the team established the requirements of the enclosure and investigated multiple assembly options. They settled on double-wall construction with dense-pack cellulose fill. High performance vinyl windows (U-0.24, solar heat gain coefficient [SHGC]-0.22), a vented R-59 attic, and exceptional air sealing completed the package.

  6. Analysis of Aquifer Response, Groundwater Flow, and PlumeEvolution at Site OU 1, Former Fort Ord, California

    SciTech Connect (OSTI)

    Jordan, Preston D.; Oldenburg, Curtis M.; Su, Grace W.

    2005-02-24

    This report presents a continuation from Oldenburg et al. (2002) of analysis of the hydrogeology, In-Situ Permeable Flow Sensor (ISPFS) results, aquifer response, and changes in the trichloroethylene (TCE) groundwater plume at Operational Unit 1 (OU 1) adjacent to the former Fritzsche Army Airfield at the former Fort Ord Army Base, located on Monterey Bay in northern Monterey County. Fuels and solvents were burned on a portion of OU 1 called the Fire Drill Area (FDA) during airport fire suppression training between 1962 and 1985. This activity resulted in soil and groundwater contamination in the unconfined A-aquifer. In the late 1980's, soil excavation and bioremediation were successful in remediating soil contamination at the site. Shortly thereafter, a groundwater pump, treat, and recharge system commenced operation. This system has been largely successful at remediating groundwater contamination at the head of the groundwater plume. However, a trichloroethylene (TCE) groundwater plume extends approximately 3000 ft (900 m) to the northwest away from the FDA. In the analyses presented here, we augment our prior work (Oldenburg et al., 2002) with new information including treatment-system totalizer data, recent water-level and chemistry data, and data collected from new wells to discern trends in contaminant migration and groundwater flow that may be useful for ongoing remediation efforts. Some conclusions from the prior study have been modified based on these new analyses, and these are pointed out clearly in this report.

  7. Estimated Maintenance Cost Savings from a Geothermal Heat Pump Energy Savings Performance Contract at Fort Polk, LA

    SciTech Connect (OSTI)

    Shonder, John A; Hughes, Patrick

    1997-06-01

    At Fort Polk, Louisiana, the space-conditioning systems of an entire city (4,003 military family housing units) have been converted to geothermal heat pumps (GHPs) under an energy savings performance contract. At the same time, other efficiency measures, such as compact fluorescent lights, low-flow hot water outlets, and attic insulation, were installed. These retrofits were performed by an energy services company at no up-front cost to the Army. The company has also assumed responsibility for maintenance of all equipment installed. In return, it receives a percentage of the energy and maintenance savings realized by the Army. In developing the energy savings performance contract, the Army estimated its pre-retrofit maintenance costs from bids received on a request for proposals. In this paper, a more rigorous cost estimate is developed, based on a survey of maintenance records for the pre-retrofit HVAC equipment. The reliability of the equipment is also estimated using an actuarial method to determine the number of units requiring replacement each year and the effect of these replacements on annual maintenance costs.

  8. Estimated maintenance cost savings from a geothermal heat pump energy savings performance contract at Fort Polk, Louisiana

    SciTech Connect (OSTI)

    Shonder, J.A.; Hughes, P.J.

    1997-12-31

    At Fort Polk, Louisiana, the space-conditioning systems of an entire city (4,003 military family housing units) have been converted to geothermal heat pumps (GHPs) under an energy savings performance contract. At the same time, other efficiency measures, such as compact fluorescent lights, low-flow hot water outlets, and attic insulation, were installed. These retrofits were performed by an energy services company at no up-front cost to the Army. The company has also assumed responsibility for maintenance of all the equipment installed. In return, it receives a percentage of the energy and maintenance savings realized by the Army. In developing the energy savings performance contract, the Army estimated its pre-retrofit maintenance costs from bids received on a request for proposals. In this paper, a more rigorous cost estimate is developed, based on a survey of maintenance records for the pre-retrofit HVAC equipment. The reliability of the equipment is also estimated using an actuarial method to determine the number of units requiring replacement each year and the effect of these replacements on annual maintenance costs.

  9. Detailed workplan for innovative technology demonstrations to support existing treatment operations at the Installation Logistics Center, DSERTS Site FTLE-33, Fort Lewis, Washington

    SciTech Connect (OSTI)

    Liikala, T.L.

    1998-07-01

    This workplan is an assemblage of documents for use by Pacific Northwest National Laboratory (PNNL) to direct and control project activities at Fort Lewis, Washington. Fort Lewis is a FORSCOM installation, whose Logistics Center (DSERTS Site FTLE-33) was placed on the National priorities List (NPL) in December 1989, as a result of trichloroethene (TCE) contamination in groundwater beneath the site. Site background information and brief descriptions of the Fort Lewis project and the main supporting documents, which will be used to direct and control the project activities, are provided. These are followed by a summary of the Work Breakdown Structure (WBS) elements, a general project schedule, a list of major deliverables, and a budget synopsis. Test plans for specific elements (Bench-Scale Testing) will be developed separately as those elements are initiated. If additional activities not specifically addressed in the Project Management Plan (Attachment 1) are added to the work scope, addendums to this workplan will be prepared to cover those activities.

  10. Twist-bend heliconical chiral nematic liquid crystal phase of an achiral rigid bent-core mesogen

    E-Print Network [OSTI]

    Dong Chen; Michi Nakata; Renfan Shao; Michael R. Tuchband; Min Shuai; Ute Baumeister; Wolfgang Weissflog; David M. Walba; Matthew A. Glaser; Joseph E. Maclennan; Noel A. Clark

    2013-08-16

    The chiral, heliconical (twist-bend) nematic ground state is reported in an achiral, rigid, bent-core mesogen (UD68). Similar to the nematic twist-bend (NTB) phase observed in bent molecular dimers, the NTB phase of UD68 forms macroscopic, smectic-like focal-conic textures and exhibits nanoscale, periodic modulation with no associated modulation of the electron density, i.e., without a detectable lamellar x-ray reflection peak. The NTB helical pitch is pTB ~ 14 nm. When an electric field is applied normal to the helix axis, a weak electroclinic effect is observed, revealing 50 um-scale left- and right-handed domains in a chiral conglomerate.

  11. Note: Rigid holder to host and bend a crystal for multiple volume reflection of a particle beam

    SciTech Connect (OSTI)

    Carassiti, V.; Melchiorri, M.

    2010-06-15

    A holder to lodge and bend a silicon crystal to excite multivolume reflection of a high-energy particle beam has been designed and fabricated. A mechanically robust and stable structure fastens a crystal at best condition for experiments. The holder has allowed the observation of 12-time repeated volume reflection with very high efficiency. We detail the most important features behind the construction of the holder together with the characterization of the crystal being bent by the holder.

  12. Strain rate and inertial effects on impact loaded single-edge notch bend specimens

    SciTech Connect (OSTI)

    Vargas, P.M.; Dodds, R.H. Jr.

    1995-12-31

    Many problems in fracture mechanics of ductile metals involve surface breaking defects located in structures subjected to impact or blast. When the severity of impact loads is sufficient to produce large inelastic deformations, the assessment of crack-tip conditions must include the effects of plasticity, strain rate and inertia. This work examines the interaction of impact loading, inelastic material deformation and rate sensitivity with the goal of improving the interpretation of ductile fracture toughness values measured under dynamic loading. The authors focus on shallow and deeply notched bend test specimens, SE(B)s, employed routinely to measure the static fracture toughness of a material. A thorough understanding of the test specimen`s dynamic behavior is a prerequisite to the application of measured fracture properties in structural applications. Three-dimensional, nonlinear dynamic analyses are performed for SE(B) fracture specimens subjected to impact loading. Loading rates obtained in conventional drop tower tests are applied in the analyses. An explicit time integration procedure coupled with an efficient (one-point) element integration scheme is employed to compute the dynamic response of the specimen. Strain-rate sensitivity is introduced via a new, efficient implementation of the Bodner-Partom viscoplastic constitutive model. Material properties for A533B steel are used in the analyses. Static analyses of the SE(B) specimens provide baseline responses for assessment of inertial effects. Similarly, dynamic analyses using a strain-rate insensitive material provide reference responses for the assessment of strain rate effects. Strains at key locations on the specimens and the support reactions are extracted from the analyses to assess the accuracy of static formulas commonly used to estimate applied J values. Inertial effects on the applied J are quantified by examining the acceleration component of J evaluated through a domain integral procedure.

  13. Calculation of the transverse kicks generated by the bends of a hollow electron lens

    SciTech Connect (OSTI)

    Stancari, Giulio

    2014-03-25

    Electron lenses are pulsed, magnetically confined electron beams whose current-density profile is shaped to obtain the desired effect on the circulating beam in high-energy accelerators. They were used in the Fermilab Tevatron collider for abort-gap clearing, beam-beam compensation, and halo scraping. A beam-beam compensation scheme based upon electron lenses is currently being implemented in the Relativistic Heavy Ion Collider at Brookhaven National Laboratory. This work is in support of a conceptual design of hollow electron beam scraper for the Large Hadron Collider. It also applies to the implementation of nonlinear integrable optics with electron lenses in the Integrable Optics Test Accelerator at Fermilab. We consider the axial asymmetries of the electron beam caused by the bends that are used to inject electrons into the interaction region and to extract them. A distribution of electron macroparticles is deposited on a discrete grid enclosed in a conducting pipe. The electrostatic potential and electric fields are calculated using numerical Poisson solvers. The kicks experienced by the circulating beam are estimated by integrating the electric fields over straight trajectories. These kicks are also provided in the form of interpolated analytical symplectic maps for numerical tracking simulations, which are needed to estimate the effects of the electron lens imperfections on proton lifetimes, emittance growth, and dynamic aperture. We outline a general procedure to calculate the magnitude of the transverse proton kicks, which can then be generalized, if needed, to include further refinements such as the space-charge evolution of the electron beam, magnetic fields generated by the electron current, and longitudinal proton dynamics.

  14. Identifying Oil Exploration Leads using Intergrated Remote Sensing and Seismic Data Analysis, Lake Sakakawea, Fort Berthold Indian Reservation, Willistion Basin

    SciTech Connect (OSTI)

    Scott R. Reeves; Randal L. Billingsley

    2004-02-26

    The Fort Berthold Indian Reservation, inhabited by the Arikara, Mandan and Hidatsa Tribes (now united to form the Three Affiliated Tribes) covers a total area of 1530 mi{sup 2} (980,000 acres). The Reservation is located approximately 15 miles east of the depocenter of the Williston basin, and to the southeast of a major structural feature and petroleum producing province, the Nesson anticline. Several published studies document the widespread existence of mature source rocks, favorable reservoir/caprock combinations, and production throughout the Reservation and surrounding areas indicating high potential for undiscovered oil and gas resources. This technical assessment was performed to better define the oil exploration opportunity, and stimulate exploration and development activities for the benefit of the Tribes. The need for this assessment is underscored by the fact that, despite its considerable potential, there is currently no meaningful production on the Reservation, and only 2% of it is currently leased. Of particular interest (and the focus of this study) is the area under the Lake Sakakawea (formed as result of the Garrison Dam). This 'reservoir taking' area, which has never been drilled, encompasses an area of 150,000 acres, and represents the largest contiguous acreage block under control of the Tribes. Furthermore, these lands are Tribal (non-allotted), hence leasing requirements are relatively simple. The opportunity for exploration success insofar as identifying potential leads under the lake is high. According to the Bureau of Land Management, there have been 591 tests for oil and gas on or immediately adjacent to the Reservation, resulting in a total of 392 producing wells and 179 plugged and abandoned wells, for a success ratio of 69%. Based on statistical probability alone, the opportunity for success is high.

  15. Low-risk and cost-effective prior savings estimates for large-scale energy conservation projects in housing: Learning from the Fort Polk GHP project

    SciTech Connect (OSTI)

    Shonder, J.A.; Hughes, P.J.; Thornton, J.W.

    1997-08-01

    Many opportunities exist for large-scale energy conservation projects in housing. Energy savings performance contracting (ESPC) is now receiving greater attention, as a means to implement such projects. This paper proposes an improved method for prior (to construction) savings estimates for these projects. The proposed approach to prior estimates is verified against data from Fort Polk, LA. In the course of evaluating the ESPC at Fort Polk, the authors have collected energy use data which allowed them to develop calibrated engineering models which accurately predict pre-retrofit energy consumption. They believe that such calibrated models could be used to provide much more accurate estimates of energy savings in retrofit projects. The improved savings estimating approach described here is based on an engineering model calibrated to field-collected data from the pre-retrofit period. A dynamic model of pre-retrofit energy use was developed for all housing and non-housing loads on a complete electrical feeder at Fort Polk. The model included the heat transfer characteristics of the buildings, the pre-retrofit air source heat pump, a hot water consumption model and a profile for electrical use by lights and other appliances. Energy consumption for all 200 apartments was totaled, and by adjusting thermostat setpoints and outdoor air infiltration parameters, the models were matched to field-collected energy consumption data for the entire feeder. The energy conservation measures were then implemented in the calibrated model: the air source heat pumps were replaced by geothermal heat pumps with desuperheaters; hot water loads were reduced to account for the low-flow shower heads; and lighting loads were reduced to account for fixture delamping and replacement with compact fluorescent lights. The analysis of pre- and post-retrofit data indicates that the retrofits have saved 30.3% of pre-retrofit electrical energy consumption on the feeder modeled in this paper.

  16. Profits and Losses from On-farm Drying and Storage of Grain Sorghum in Central Texas and the Coastal Bend

    E-Print Network [OSTI]

    Hildreth, R. J.; Moore, C. A.

    1958-01-01

    AND STORAGE OF GRAIN SORGHUM FOR UNITS OF SELECTED SIZE AND TYPE - - Item Round bin Quonset type Dimensions Capacity1 2-2,200 bushel 1-32 x 60 bins building 2.274 cwt. 7.815 cwt. Annual costs --- Dollars - - - Depreciation on structure, fans, grain...' . 'N @ and Storage. of < 4 GJ@$& A. .-+-%aL in Central Texas and tte Coastal Bend TEXAS AGRICULTURAL EXPERIMENT STATION R. D. LEWIS. DIRECTOR. COLLEGE STATION. TEXAS IN COOPERATION WITH THE UNITED STATES DEPARTMENT OF AGRICULTURE SUMMARY...

  17. Home sweet home: Texas A&M AgriLife opens the first WaterSense-labeled house in Dallas-Fort Worth 

    E-Print Network [OSTI]

    Lee, Leslie

    2013-01-01

    2013 Story by Leslie Lee Photo by Leslie Lee, Texas Water Resources Institute. Home sweet home Texas A&M AgriLife opens the ?rst WaterSense-labeled house in Dallas-Fort Worth On any given evening in the ????s, a?er a long day of working...-foot ?oor plan, the ??-year-old home wouldn?t have looked like much of an a?raction. But today, a?er a water-minded renovation of the once-abandoned house, the thousands of visitors who have toured it this year would probably disagree. ?e ???? version...

  18. A double crystal monochromator using tangentially bend crystals in combination with toroidal mirror focusing

    SciTech Connect (OSTI)

    Feng, Jun, Thompson,A.C.; Padmore,H.A.

    2000-02-24

    In collaboration with the Chemistry Department at the University of California at Berkeley, the ALS is building a beamline for structural determination in materials chemistry. The system will be used for single crystal x-ray diffraction on crystals that are too small or disordered for examination on laboratory systems, and typically will be used for crystals in the 5 - 20 micron regime. As some of the materials being designed are of the size of small proteins, phasing using direct methods is problematic, and so use of multiple wavelength anomalous dispersion techniques will be employed in many cases. The production of new compounds has been revolutionized in recent years with the development of combinatorial synthesis techniques, and a major b2048 to further advances in this field is access to rapid measurement of structural parameters. The specification of the beamline follows from these points. It must have a small focal spot to match closely the size of the crystals, high resolution for MAD techniques, and a high flux in the small focus. The strategy for satisfying these constraints is to us a system which is compact and which uses the minimum number of components. This is done in this case by using a pseudo channel cut crystal monochromator with tangentially bent crystals, in combination with a 1:1 focusing toroidal mirror. The toroidal mirror at 1:1 magnification has only very small aberrations, and from a 220 (h) by 25 (v) [micro] m FWHM source, an image of 220 by 45 [micro]m FWHM should be produced for a 3 mrad horizontal aperture for a full vertical aperture. This has already been achieved on an existing beamline. The crystal monochromator uses tangentially bent crystals in a concave - convex configuration to achieve matching of Bragg angles to the divergent source, while maintaining zero focusing power. A useful feature of this arrangement is that while there is an optimum crystal curvature for each energy that gives the expected Darwin width limited resolution, fixing the curvature gives approximately ideal resolution over typically 2 keV for the ALS bending magnet source. A further simplification is that the whole optical system will be inside the shield wall, with only a small pipe emerging from the shield wall to feed a standard commercial diffraction system. This means that the mirror will be at only 6.5 m from the source. This means that the toroidal mirror can be as short as 300 mm while collecting most of the vertical radiation fan. In addition, as the required tangential slope error is related to the angular size of the source, putting the mirror close reduces the slope error requirements substantially. These aspects together should result in a simple, low cost and very high performance system for small crystal, small molecule cr2048llography.

  19. Effects of toughness anisotropy and combined tension, torsion, and bending loads on fracture behavior of ferritic nuclear pipe

    SciTech Connect (OSTI)

    Mohan, R.; Marshall, C.; Ghadiali, N.; Wilkowski, G. [Battelle, Columbus, OH (United States)

    1997-04-01

    This paper summarizes work on angled through-wall-crack initiation and combined loading effects on ferritic nuclear pipe performed as part of the Nuclear Regulatory Commission`s research program entitled {open_quotes}Short Cracks In Piping an Piping Welds{close_quotes}. The reader is referred to Reference 1 for details of the experiments and analyses conducted as part of this program. The major impetus for this work stemmed from the observation that initially circumferentially oriented cracks in carbon steel pipes exhibited a high tendency to grow at a different angle when the cracked pipes were subjected to bending or bending plus pressure loads. This failure mode was little understood, and the effect of angled crack grown from an initially circumferential crack raised questions about how cracks in a piping system subjected to combined loading with torsional stresses would behave. There were three major efforts undertaken in this study. The first involved a literature review to assess the causes of toughness anisotropy in ferritic pipes and to develop strength and toughness data as a function of angle from the circumferential plane. The second effort was an attempt to develop a screening criterion based on toughness anisotropy and to compare this screening criterion with experimental pipe fracture data. The third and more significant effort involved finite element analyses to examine why cracks grow at an angle and what is the effect of combined loads with torsional stresses on a circumferentially cracked pipe. These three efforts are summarized.

  20. Refraction-Based Alternative Explanation for: Bending of Light Near a Star, Gravitational Red/Blue Shift and Black-Hole

    E-Print Network [OSTI]

    R. C. Gupta; Anirudh Pradhan; Sushant Gupta

    2010-04-09

    Many of the general-relativity-tests such as bending of light near a star and gravitational red/blue shift are explained without general-relativity & without Newtonian-approach. The authors first cast doubts on both, the Newtonian and the relativistic approach; and proposes a novel alternative-explanation. The new alternative explanation is based on refraction-phenomenon of optics. Estimation of results, with new approach, are in agreement with known values. Though physics is different, but it is argued that general-relativity based gravitational-bending and refraction-based bending have more in common than is generally realized. Also discussed are black-hole and gravitational-lensing in the new perspective of refraction. The new refraction-based theory makes a few new predictions and also suggests a few tests..

  1. Refraction-Based Alternative Explanation for: Bending of Light Near a Star, Gravitational Red/Blue Shift and Black-Hole

    E-Print Network [OSTI]

    R. C. Gupta; Anirudh Pradhan; Sushant Gupta

    2015-10-22

    In this research-paper, many of the general-relativity-tests such as bending of light near a star and gravitational red/blue shift are explained without general-relativity & even without Newtonian-approach. The authors first raise questions on the validity of both, the Newtonian and the relativistic approach; and then propose a novel alternative-explanation. The new alternative explanation is based on refraction-phenomenon of optics. Estimation of results with new approach are in agreement with known values. Though physics is different, but it is argued that general-relativity based gravitational-bending and refraction based bending have more in common than is generally realized. Also discussed are black-hole and gravitational-lensing in the new perspective of refraction. The new refraction-based theory makes a few new predictions and also suggests a few tests.

  2. AVTA Federal Fleet PEV Readiness Data Logging and Characterization Study for the National Park Service: Fort Vancouver National Historic Site

    SciTech Connect (OSTI)

    Stephen Schey; Jim Francfort

    2014-03-01

    Battelle Energy Alliance, LLC, managing and operating contractor for the U.S. Department of Energy’s Idaho National Laboratory, is the lead laboratory for the U.S. Department of Energy’s Advanced Vehicle Testing. Battelle Energy Alliance, LLC contracted with Intertek Testing Services, North America (ITSNA) to collect data on federal fleet operations as part of the Advanced Vehicle Testing Activity’s Federal Fleet Vehicle Data Logging and Characterization study. The Advanced Vehicle Testing Activity study seeks to collect data to validate the use of advanced electric drive vehicle transportation. This report focuses on the Fort Vancouver National Historic Site (FVNHS) fleet to identify daily operational characteristics of select vehicles and report findings on vehicle and mission characterizations to support the successful introduction of electric vehicles (EVs) into the agencies’ fleet. Individual observations of the selected vehicles provided the basis for recommendations related to EV adoption and whether a battery electric vehicle (BEV) or plug-in hybrid electric vehicle (PHEV) (collectively plug-in electric vehicles) could fulfill the mission requirements. FVNHS identified three vehicles in its fleet for consideration. While the FVNHS vehicles conduct many different missions, only two (i.e., support and pool missions) were selected by agency management to be part of this fleet evaluation. The logged vehicles included a pickup truck and a minivan. This report will show that BEVs and PHEVs are capable of performing the required missions and providing an alternative vehicle for both mission categories, because each has sufficient range for individual trips and time available each day for charging to accommodate multiple trips per day. These charging events could occur at the vehicle’s home base, high-use work areas, or in intermediate areas along routes that the vehicles frequently travel. Replacement of vehicles in the current fleet would result in significant reductions in emission of greenhouse gases and petroleum use, while also reducing fuel costs. The Vancouver, Washington area and neighboring Portland, Oregon are leaders in adoption of PEVs in the United States1. PEV charging stations, or more appropriately identified as electric vehicle supply equipment, located on the FVNHS facility would be a benefit for both FVNHS fleets and general public use. Fleet drivers and park visitors operating privately owned plug-in electric vehicles benefit by using the charging infrastructure. ITSNA recommends location analysis of the FVNHS site to identify the optimal station placement for electric vehicle supply equipment. ITSNA recognizes the support of Idaho National Laboratory and ICF International for their efforts to initiate communication with the National Parks Service and FVNHS for participation in this study. ITSNA is pleased to provide this report and is encouraged by the high interest and support from the National Park Service and FVNHS personnel

  3. An Archaeological Survey for the Scott Number 2 Well in Brazoria County Texas 

    E-Print Network [OSTI]

    Moore, William; Baxter, Edward

    2015-07-28

    within the region is low at 0.001 – 0.1 sites per square mile. Threats to sites in the area consist of mainly of urban sprawl, agriculture, and destruction by relic collectors. Most of the archaeological surveys in the county consist of small area... area. The remaining studies have been conducted by universities, private contractors, and avocational archaeologists. Most of these projects can be found by checking the Abstracts in Texas Contract Archeology series published by the THC (Moore 1990...

  4. EIS-0001: Strategic Petroleum Reserve, Bryan Mound Salt Dome, Brazoria County, Texas

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Strategic Petroleum Reserve prepared this SEIS to address the environmental impacts of construction and operation of two types of brine disposal systems and a new water supply system. This EIS supplements FES 76/77-6, Bryan Mound Storage Site.

  5. An environmental study of the subsurface Miocene of Brazoria and Galveston counties, Texas 

    E-Print Network [OSTI]

    Linder, Henry Darrell

    1962-01-01

    ~ 16 Vertical Djstrihution of Environments. ~. . . . . 19 Tezacoo Es Kainer, Hoo 1 ~ ~ o r e ~ y r ~ ~ ~ 19 Humble, Houston FermI and Development Company Hoe 1 5 ~ . a ~ ~ r' a ~ ~ ~ a a a o ~ ~ . e ~ ~ ~ 22 TABLE OF CGHTBHTS cont'd Rage Pan... American, Houston F~as and Development CoeeQg Haa 1-D 'e ~ ~ ~ ~ a a ~ ' ~ ~ ~ ~ ~ e 24 ?, Amer&de Houston Farms ~? d Development COBP&nF HOa 2 a ~ a a ~ ~ ~ ~ ~ ~ . ~ ~ e a ' ~ e '26 Cho~line State Tract ', A" 1 Ho. 1 , . . . . . 27 Shell, St:te Tract...

  6. An exact solution for the history-dependent material and delamination behavior of laminated plates subjected to cylindrical bending

    SciTech Connect (OSTI)

    Williams, Todd O

    2009-01-01

    The exact solution for the history-dependent behavior of laminated plates subjected to cylindrical bending is presented. The solution represents the extension of Pagano's solution to consider arbitrary types of constitutive behaviors for the individual lamina as well as arbitrary types of cohesive zones models for delamination behavior. Examples of the possible types of material behavior are plasticity, viscoelasticity, viscoplasticity, and damaging. Examples of possible CZMs that can be considered are linear, nonlinear hardening, as well as nonlinear with softening. The resulting solution is intended as a benchmark solution for considering the predictive capabilities of different plate theories. Initial results are presented for several types of history-dependent material behaviors. It is shown that the plate response in the presence of history-dependent behaviors can differ dramatically from the elastic response. These results have strong implications for what constitutes an appropriate plate theory for modeling such behaviors.

  7. SEM in situ MiniCantilever Beam Bending of U-10Mo/Zr/Al Fuel Elements

    SciTech Connect (OSTI)

    Mook, William; Baldwin, Jon K.; Martinez, Ricardo M.; Mara, Nathan A.

    2014-06-16

    In this work, the fracture behavior of Al/Zr and Zr/dU-10Mo interfaces was measured via the minicantilever bend technique. The energy dissipation rates were found to be approximately 3.7-5 mj/mm2 and 5.9 mj/mm2 for each interface, respectively. It was found that in order to test the Zr/U-10Mo interface, location of the hinge of the cantilever was a key parameter. While this test could be adapted to hot cell use through careful alignment fixturing and measurement of crack lengths with an optical microscope (as opposed to SEM, which was used here out of convenience), machining of the cantilevers via MiniMill in such a way as to locate the interfaces at the cantilever hinge, as well as proper placement of a femtosecond laser notch will continue to be key challenges in a hot cell environment.

  8. The small hive beetle, Aethina tumida, was first detected in the United States in 996 near Charleston, South Carolina. In the spring of 998 in Fort Pierce, Florida, a scientist with the

    E-Print Network [OSTI]

    Tarpy, David R.

    Charleston, South Carolina. In the spring of 998 in Fort Pierce, Florida, a scientist with the Florida, the only recorded sightings of this insect occurred in the south- ern regions of Africa. During the summer spread quickly. That same year, beekeepers and inspectors also reported occurrences in Georgia, South

  9. L.J. van Vliet and P.W. Verbeek, Curvature and bending energy in digitized 2D and 3D images, in: SCIA'93, Proc. Scandinavian Conference on Image Analysis, Tromso, Norway, 1993, 1403-1410.

    E-Print Network [OSTI]

    van Vliet, Lucas J.

    L.J. van Vliet and P.W. Verbeek, Curvature and bending energy in digitized 2D and 3D images, in-1410. Curvature and Bending Energy in Digitized 2D and 3D Images Lucas J. van Vliet and Piet W. Verbeek Pattern. In this paper we estimate object curvature directly from a properly sampled gray- scale image using 2D isotropic

  10. L.J. van Vliet and P.W. Verbeek, Curvature and bending energy in digitized 2D and 3D images, in: SCIA'93, Proc. 8 th Scandinavian Conference on Image Analysis, Tromso, Norway, 1993, 14031410.

    E-Print Network [OSTI]

    van Vliet, Lucas J.

    L.J. van Vliet and P.W. Verbeek, Curvature and bending energy in digitized 2D and 3D images, in­1410. Curvature and Bending Energy in Digitized 2D and 3D Images Lucas J. van Vliet and Piet W. Verbeek Pattern. In this paper we estimate object curvature directly from a properly sampled gray­ scale image using 2D isotropic

  11. New Whole-House Solutions Case Study: Fort Devens: Cold Climate Market-Rate Townhomes Targeting HERS Index of 40, Harvard, Massachusetts

    SciTech Connect (OSTI)

    2013-11-01

    Achieving aggressive energy efficiency targets requires tight coordination and clear communication among owners, designers, builders, and subcontractors. For this townhome project, MassDevelopment, the quasi-governmental agency owner, selected Metric Development of Boston, teaming with Building America team Consortium for Advanced Residential Buildings (CARB) and Cambridge Seven Architects, to build very high performing market-rate homes. Fort Devens is part of a decommissioned army base in working-class Harvard, Massachusetts, approximately one hour northwest of Boston. The team proposed 12 net zero energy-ready townhomes that were also designed to achieve a Home Energy Rating System (HERS) Index Score of 41 before adding renewables. The team carefully planned the site to maximize solar access, daylighting, and efficient building forms.

  12. Low-Risk and Cost-Effective Prior Savings Estimates for Large-Scale Energy Conservation Projects in Housing: Learning from the Fort Polk GHP Project

    SciTech Connect (OSTI)

    Shonder, John A; Hughes, Patrick; Thornton, Jeff W.

    1997-08-01

    Many opportunities exist for large-scale energy conservation projects in housing: military housing, federally-subsidized low-income housing, and planned communities (condominiums, townhomes, senior centers) to name a few. Energy savings performance contracting (ESPC) is now receiving greater attention, as a means to implement such projects. This paper proposes an improved method for prior (to construction) savings estimates for these projects. More accurate prior estimates reduce project risk, decrease financing costs, and help avoid post-construction legal disputes over performance contract baseline adjustments. The proposed approach to prior estimates is verified against data from Fort Polk, LA. In the course of evaluating the ESPC at Fort Polk, Louisiana, we have collected energy use data - both at the electrical feeder level and at the level of individual residences - which allowed us to develop calibrated engineering models which accurately predict pre-retrofit energy consumption. We believe that such calibrated models could be used to provide much more accurate estimates of energy savings in retrofit projects, particularly in cases where the energy consumption of large populations of housing can be captured on one or a few meters. The improved savings estimating approach described here is based on an engineering model calibrated to field-collected data from the pre-retrofit period. A dynamic model of pre-retrofit energy use was developed for all housing and non-housing loads on a complete electrical feeder at Fort Polk. The feeder serves 46 buildings containing a total of 200 individual apartments. Of the 46 buildings, there are three unique types, and among these types the only difference is compass orientation. The model included the heat transfer characteristics of the buildings, the pre-retrofit air source heat pump, a hot water consumption model and a profile for electrical use by lights and other appliances. Energy consumption for all 200 apartments was totaled, and by adjusting thermostat setpoints and outdoor air infiltration parameters, the models were matched to field-collected energy consumption data for the entire feeder. The energy conservation measures were then implemented in the calibrated model: the air source heat pumps were replaced by geothermal heat pumps (GHPs) with desuperheaters; hot water loads were reduced to account for the low-flow shower heads; and lighting loads were reduced to account for fixture delamping and replacement with compact fluorescent lights (CFLs). Our analysis of pre- and post-retrofit data (Shonder and Hughes, 1997) indicates that the retrofits have saved 30.3% of pre-retrofit electrical energy consumption on the feeder modeled in this paper. Using the method outlined, we have been able to predict this savings within 0.1% of its measured value, using only pre-construction energy consumption data, and data from one pilot test site. It is well-known that predictions of savings from energy conservation programs are often optimistic, especially in the case of residential retrofits. Fels and keating (1993) cite several examples of programs which achieved as little as 20% of the predicted energy savings. Factors which influence the sometimes large discrepancies between actual and predicted savings include changes in occupancy, take-back effects (in which more efficient system operation leads occupants to choose higher levels of comfort), and changes in base energy use (e.g. through purchase of additional appliances such as washing machines and clothes dryers). An even larger factor, perhaps, is the inaccuracy inherent in the engineering models (BLAST, DOE-2, etc.) commonly used to estimate building energy consumption, if these models are not first calibrated to site-monitored data. For example, prior estimates of base-wide savings from the Fort Polk ESPC were on the order of 40% of pre-retrofit electrical use; our analysis has shown the true savings for the entire project (which includes 16 separate electrical feeders) to be about 32%. It should be noted that the retrofits ca

  13. Direct observation of the effective bending moduli of a fluid membrane: Free-energy cost due to the reference-plane deformations

    E-Print Network [OSTI]

    Yoshihiro Nishiyama

    2003-07-10

    Effective bending moduli of a fluid membrane are investigated by means of the transfer-matrix method developed in our preceding paper. This method allows us to survey various statistical measures for the partition sum. The role of the statistical measures is arousing much attention, since Pinnow and Helfrich claimed that under a suitable statistical measure, that is, the local mean curvature, the fluid membranes are stiffened, rather than softened, by thermal undulations. In this paper, we propose an efficient method to observe the effective bending moduli directly: We subjected a fluid membrane to a curved reference plane, and from the free-energy cost due to the reference-plane deformations, we read off the effective bending moduli. Accepting the mean-curvature measure, we found that the effective bending rigidity gains even in the case of very flexible membrane (small bare rigidity); it has been rather controversial that for such non-perturbative regime, the analytical prediction does apply. We also incorporate the Gaussian-curvature modulus, and calculated its effective rigidity. Thereby, we found that the effective Gaussian-curvature modulus stays almost scale-invariant. All these features are contrasted with the results under the normal-displacement measure.

  14. Effect of stainless steel weld overlay cladding on the structural integrity of flawed steel plates in bending. Series 1

    SciTech Connect (OSTI)

    Corwin, W.R.; Robinson, G.C.; Nanstad, R.K.; Merkle, J.G.; Berggren, R.G.; Goodwin, G.M.; Swain, R.L.; Owings, T.D.

    1985-04-01

    The Heavy-Section Steel Technology (HSST) Stainless Steel Cladding Evaluations were undertaken to study the interaction of stainless steel cladding on the inside surface of a reactor pressure vessel with flaws initiating and propagating in base metal. With the more recent focus of safety studies on overcooling type transients, for which the behavior of small flaws is important, stainless steel cladding may have a key role in controlling the propagation and/or arrest of propagating flaws. A complicating factor in understanding the role of stainless steel cladding in this setting is the scarcity of data on its fracture toughness as a function of radiation dose and the fabrication process. The initial phase of the HSST evaluations addresses this question by testing the response of 51-mm-thick flawed plates clad with single-wire, submerged-arc weld overlays of different toughness levels. The tests completed indicate that cladding of moderate toughness had a limited ability to enhance the structural arrest toughness of a beam in bending. The specimen design and fabrication techniques employed for this first completed series of tests resulted in flaw and specimen configurations that prevented adequate control of the stress state at pop-in of the hydrogen-charged electron-beam welds. As a result, analyses of the tests by two approximate techniques and by the ORMGEN-ADINA-ORVIRT finite-element programs were not completely consistent.

  15. A BEAMLINE FOR HIGH PRESSURE STUDIES AT THE ADVANCED LIGHT SOURCE WITH A SUPERCONDUCTING BENDING MAGNET AS THE SOURCE

    SciTech Connect (OSTI)

    Kunz, M; MacDowell, A A; Caldwell, W A; Cambie, D; Celestre, R S; Domning, E E; Duarte, R M; Gleason, A; Glossinger, J; Kelez, N; Plate, D W; Yu, T; Zaug, J M; Padmore, H A; Jeanloz, R; Alivisatos, A P; Clark, S M

    2005-04-19

    A new facility for high-pressure diffraction and spectroscopy using diamond anvil high-pressure cells has been built at the Advanced Light Source on Beamline 12.2.2. This beamline benefits from the hard X-radiation generated by a 6 Tesla superconducting bending magnet (superbend). Useful x-ray flux is available between 5 keV and 35 keV. The radiation is transferred from the superbend to the experimental enclosure by the brightness preserving optics of the beamline. These optics are comprised of: a plane parabola collimating mirror (M1), followed by a Kohzu monochromator vessel with a Si(111) crystals (E/{Delta}E {approx} 7000) and a W/B{sub 4}C multilayer (E/{Delta}E {approx} 100), and then a toroidal focusing mirror (M2) with variable focusing distance. The experimental enclosure contains an automated beam positioning system, a set of slits, ion chambers, the sample positioning goniometry and area detectors (CCD or image-plate detector). Future developments aim at the installation of a second end station dedicated for in situ laser-heating on one hand and a dedicated high-pressure single-crystal station, applying both monochromatic as well as polychromatic techniques.

  16. A Beamline for High-Pressure Studies at the Advanced Light Sourcewith a Superconducting Bending Magnet as the Source

    SciTech Connect (OSTI)

    Kunz, Martin; MacDowell, Alastair A.; Caldwell, Wendel A.; Cambie, Daniella; Celestre, Richard S.; Domning, Edward E.; Duarte,Robert M.; Gleason, Arianna E.; Glossinger, James M.; Kelez, Nicholas; Plate, David W.; Yu, Tony; Zaug, Joeseph M.; Padmore, Howard A.; Jeanloz,Raymond; Alivisatos, A. Paul; Clark, Simon M.

    2005-06-30

    A new facility for high-pressure diffraction and spectroscopy using diamond anvil high-pressure cells has been built at the Advanced Light Source on Beamline 12.2.2. This beamline benefits from the hard X-radiation generated by a 6 Tesla superconducting bending magnet (superbend). Useful x-ray flux is available between 5 keV and 35 keV. The radiation is transferred from the superbend to the experimental enclosure by the brightness preserving optics of the beamline. These optics are comprised of: a plane parabola collimating mirror (M1), followed by a Kohzu monochromator vessel with a Si(111) crystals (E/DE {approx}7000) and a W/B4C multilayers (E/DE {approx} 100), and then a toroidal focusing mirror (M2) with variable focusing distance. The experimental enclosure contains an automated beam positioning system, a set of slits, ion chambers, the sample positioning goniometry and area detectors (CCD or image-plate detector). Future developments aim at the installation of a second end station dedicated for in situ laser-heating on one hand and a dedicated high-pressure single-crystal station, applying both monochromatic as well as polychromatic techniques.

  17. Observation of Work Functions, Metallicity, Band Bending, Interfacial Dipoles by EUPS for Characterizing High-k/Metal Interfaces

    SciTech Connect (OSTI)

    Tomie, Toshihisa; Ishitsuka, Tomoaki; Ootsuka, Teruhisa; Ota, Hiroyuki

    2011-11-10

    EUPS (EUV excited photoelectron spectroscopy) is a novel photoelectron spectroscopy technique, in which a sample is excited with 4.86 nm (255 eV), 3-ns pulse EUV light emitted from a laser-produced plasma and the resulting electron spectrum is analyzed with a time-of-flight (TOF) analyzer. EUPS gives information of the topmost atoms because the escape depth of photo-electrons excited by 4.86 nm light is only 0.5 nm. EUPS can evaluate band-bending because the peak density of the excitation light on the sample is extremely high, so that bent electronic bands in semiconductors can be flattened. Secondary electron spectra, from which the vacuum level of the material surface can be determined, are obtained very quickly owing to the use of a TOF analyzer, The metal gate related issues are one of the most challenging topics facing CMOS technology. This paper demonstrates EUPS as a powerful method for characterizing high-k/metal interfaces by showing data from direct observations of interfacial dipoles.

  18. Tetrahedral Symmetry for Methane The infrared spectrum of methane shows two absorptions: a bend at 1306 cm-1 and a stretch at 3019 cm-1. Demonstrate that a

    E-Print Network [OSTI]

    Rioux, Frank

    Tetrahedral Symmetry for Methane The infrared spectrum of methane shows two absorptions: a bend symmetry for methane is consistent with this spectroscopic data. Also predict how many Raman active modes methane should have. E C3 C2 S4 A1 : x2 + y2 + z2 A2 C Td 1 1 2 3 3 1 1 1 0 0 1 1 2 1 1 1 1 0 1 1 1 1 0 1

  19. EIS-0473: EPA Notice of Availability of a Final Environmental...

    Broader source: Energy.gov (indexed) [DOE]

    EPA Notice of Availability of the W.A. Parish Post-Combustion CO2 Capture and Sequestration Project (PCCS), Fort Bend County, TX Final Environmental Impact Statement....

  20. VOLUME 82, NUMBER 22 P H Y S I C A L R E V I E W L E T T E R S 31 MAY 1999 Bending and Base-Stacking Interactions in Double-Stranded DNA

    E-Print Network [OSTI]

    Zhang, Yang

    is proposed by taking into account the structural properties of realistic dsDNA. Bending energy of the sugar and un- winding instability of DNA. We suggest that the present model, after some revisions, will also

  1. Estimating the Energy, Demand and Cost Savings from a Geothermal Heat Pump ESPC Project at Fort Polk, LA Through Utility Bill Analysis.

    SciTech Connect (OSTI)

    Shonder, John A; Hughes, Patrick

    2006-01-01

    Energy savings performance contracts (ESPCs) are a method of financing energy conservation projects using the energy cost savings generated by the conservation measures themselves. Ideally, reduced energy costs are visible as reduced utility bills, but in fact this is not always the case. On large military bases, for example, a single electric meter typically covers hundreds of individual buildings. Savings from an ESPC involving only a small number of these buildings will have little effect on the overall utility bill. In fact, changes in mission, occupancy, and energy prices could cause substantial increases in utility bills. For this reason, other, more practical, methods have been developed to measure and verify savings in ESPC projects. Nevertheless, increasing utility bills--when ESPCs are expected to be reducing them--are problematic and can lead some observers to question whether savings are actually being achieved. In this paper, the authors use utility bill analysis to determine energy, demand, and cost savings from an ESPC project that installed geothermal heat pumps in the family housing areas of the military base at Fort Polk, Louisiana. The savings estimates for the first year after the retrofits were found to be in substantial agreement with previous estimates that were based on submetered data. However, the utility bills also show that electrical use tended to increase as time went on. Since other data show that the energy use in family housing has remained about the same over the period, the authors conclude that the savings from the ESPC have persisted, and increases in electrical use must be due to loads unassociated with family housing. This shows that under certain circumstances, and with the proper analysis, utility bills can be used to estimate savings from ESPC projects. However, these circumstances are rare and over time the comparison may be invalidated by increases in energy use in areas unaffected by the ESPC.

  2. Fort Devens: Cold Climate Market-Rate Townhomes Targeting HERS Index of 40, Harvard, Massachusetts (Fact Sheet), Building America Case Study: Whole-House Solutions for New Homes, Building Technologies Office (BTO)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12, 2015ExecutiveFluorescent LampFort Collins, Colorado on Track to Net Zero

  3. Fort Benning Indianhead Townhome Renovations

    SciTech Connect (OSTI)

    Stephenson, R.; Roberts, S.; Butler, T.; Kim, E.

    2012-12-01

    The NAHB Research Center partnered with production builder Winchester/Camberley Homes to build a DOE Building America New Construction Test House (NCTH). This single family, detached house, located in the mixed-humid climate zone of Silver Spring, MD, was completed in June 2011. The primary goal for this house was to improve energy efficiency by 30% over the Building America B10 benchmark by developing and implementing an optimized energy solutions package design that could be cost effectively and reliably constructed on a production basis using quality management practices. The intent of this report is to outline the features of this house, discuss the implementation of the energy efficient design, and report on short-term testing results. During the interactive design process of this project, numerous iterations of the framing, air sealing, insulation, and space conditioning systems were evaluated for energy performance, cost, and practical implementation. The final design featured numerous advanced framing techniques, high levels of insulation, and the HVAC system entirely within conditioned space. Short-term testing confirmed a very tight thermal envelope and efficient and effective heating and cooling. In addition, relevant heating, cooling, humidity, energy, and wall cavity moisture data will be collected and presented in a future long-term report.

  4. Priority Groundwater Management Areas: Overview and Frequently Asked Questions 

    E-Print Network [OSTI]

    Silvy, Valeen; Lesikar, Bruce J.; Persyn, Russell A.

    2008-11-07

    Menard County UWCD ? 8/14/1999 46 Clearwater UWCD ? 8/21/1999 47 Presidio County UWCD ? 8/31/1999 48 Guadalupe County GCD ? 11/14/1999 49 Bee GCD ? 1/20/2001 50 Blanco-Pedernales GCD ? 1/23/2001 51 Brewster County GCD ? 11/6/2001 52 Coastal Bend GCD ? 11... groundwater management and planning. Anderson Andrews Angelina Aransas Archer Armstrong Atascosa Austin Bailey Bandera Bastrop Baylor Bee Bell Bexar Blanco Borden Bosque Bowie Brazoria Brazos Brewster Briscoe Brooks Brown Burleson Burnet Caldwell Calhoun...

  5. Time-resolved measurement of photon emission during fast crack propagation in three-point bending fracture of silica glass and soda lime glass

    SciTech Connect (OSTI)

    Shiota, Tadashi, E-mail: tshiota@ceram.titech.ac.jp; Sato, Yoshitaka; Yasuda, Kouichi [Department of Metallurgy and Ceramics Science, Tokyo Institute of Technology, 2-12-1-S7-13 Ookayama, Meguro-ku, Tokyo 152-8550 (Japan)] [Department of Metallurgy and Ceramics Science, Tokyo Institute of Technology, 2-12-1-S7-13 Ookayama, Meguro-ku, Tokyo 152-8550 (Japan)

    2014-03-10

    Simultaneous time-resolved measurements of photon emission (PE) and fast crack propagation upon bending fracture were conducted in silica glass and soda lime glass. Observation of fracture surfaces revealed that macroscopic crack propagation behavior was similar between the silica glass and soda lime glass when fracture loads for these specimens were comparable and cracks propagated without branching. However, a large difference in the PE characteristics was found between the two glasses. In silica glass, PE (645–655?nm) was observed during the entire crack propagation process, whereas intense PE (430–490?nm and 500–600?nm) was observed during the initial stages of propagation. In contrast, only weak PE was detected in soda lime glass. These results show that there is a large difference in the atomic processes involved in fast crack propagation between these glasses, and that PE can be used to study brittle fracture on the atomic scale.

  6. Noncontacting laser photocarrier radiometric depth profilometry of harmonically modulated band bending in the space-charge layer at doped SiO{sub 2}-Si interfaces

    SciTech Connect (OSTI)

    Mandelis, Andreas; Batista, Jerias; Gibkes, Juergen; Pawlak, Michael; Pelzl, Josef [Institute fuer Experimentalphysik III, Festkoerperspekroskopie, Ruhr-Universitaet Bochum, Bochum D-44801, Germany and Center for Advanced Diffusion-Wave Technologies, Department of Mechanical and Industrial Engineering, University of Toronto, Ontario, M5S 3G8 (Canada); Center for Advanced Diffusion-Wave Technologies, Department of Mechanical and Industrial Engineering, University of Toronto, Ontario, M5S 3G8 (Canada); Institut fuer Experimentalphysik III, Festkoerperspekroskopie, Ruhr-Universitaet Bochum, Bochum D-44801 (Germany); Institut fuer Experimentalphysik III, Festkoerperspekroskopie, Ruhr-Universitaet Bochum, Bochum D-44801, Germany and Institute of Physics, Nicolaus Copernicus University, Grudziadzka 5/7, 87-100 Torun (Poland); Institut fuer Experimentalphysik III, Festkoerperspekroskopie, Ruhr-Universitat Bochum, Bochum D-44801 (Germany)

    2005-04-15

    Laser infrared photocarrier radiometry (PCR) was used with a harmonically modulated low-power laser pump and a superposed dc superband-gap optical bias (a secondary laser beam) to control and monitor the space-charge-layer (SCL) width in oxidized p-Si-SiO{sub 2} and n-Si-SiO{sub 2} interfaces (wafers) exhibiting charged interface-state related band bending. Applying the theory of PCR-SCL dynamics [A. Mandelis, J. Appl. Phys. 97, 083508 (2005)] to the experiments yielded various transport parameters of the samples as well as depth profiles of the SCL exhibiting complete ( p-type Si) or partial (n-type Si) band flattening, to a degree controlled by widely different minority-carrier capture cross section at each interface. The uncompensated charge density at the interface was also calculated from the theory.

  7. Device and method for measuring multi-phase fluid flow and density of fluid in a conduit having a gradual bend

    DOE Patents [OSTI]

    Ortiz, Marcos German (Idaho Falls, ID); Boucher, Timothy J. (Helena, MT)

    1998-01-01

    A system for measuring fluid flow in a conduit having a gradual bend or arc, and a straight section. The system includes pressure transducers, one or more disposed in the conduit on the outside of the arc, and one disposed in the conduit in a straight section thereof. The pressure transducers measure the pressure of fluid in the conduit at the locations of the pressure transducers and this information is used by a computational device to calculate fluid flow rate in the conduit. For multi-phase fluid, the density of the fluid is measured by another pair of pressure transducers, one of which is located in the conduit elevationally above the other. The computation device then uses the density measurement along with the fluid pressure measurements, to calculate fluid flow.

  8. Device and method for measuring multi-phase fluid flow and density of fluid in a conduit having a gradual bend

    DOE Patents [OSTI]

    Ortiz, M.G.; Boucher, T.J.

    1998-10-27

    A system is described for measuring fluid flow in a conduit having a gradual bend or arc, and a straight section. The system includes pressure transducers, one or more disposed in the conduit on the outside of the arc, and one disposed in the conduit in a straight section thereof. The pressure transducers measure the pressure of fluid in the conduit at the locations of the pressure transducers and this information is used by a computational device to calculate fluid flow rate in the conduit. For multi-phase fluid, the density of the fluid is measured by another pair of pressure transducers, one of which is located in the conduit elevationally above the other. The computation device then uses the density measurement along with the fluid pressure measurements, to calculate fluid flow. 1 fig.

  9. Progress Letter Report on Bending Fatigue Test System Development for Spent Nuclear Fuel Vibration Integrity Study (Out-of-cell fatigue testing development - Task 2.4)

    SciTech Connect (OSTI)

    Wang, Jy-An John [ORNL; Wang, Hong [ORNL; Cox, Thomas S [ORNL; Baldwin, Charles A [ORNL; Bevard, Bruce Balkcom [ORNL

    2013-08-01

    Vibration integrity of high burn-up spent nuclear fuel in transportation remains to be a critical component of US nuclear waste management system. The structural evaluation of package for spent fuel transportation eventually will need to see if the content or spent fuel is in a subcritical condition. However, a system for testing and characterizing such spent fuel is still lacking mainly due to the complication involved with dealing radioactive specimens in a hot cell environment. Apparently, the current state-of-the-art in spent fuel research and development is quite far away from the delivery of reliable mechanical property data for the assessment of spent fuels in the transport package evaluation. Under the sponsorship of US NRC, ORNL has taken the challenge in developing a robust testing system for spent fuel in hot cell. An extensive literature survey was carried out and unique requirements of such testing system were identified. The U-frame setup has come to the top among various designs examined for reverse bending fatigue test of spent fuel rod. The U-frame has many features that deserve mentioned here: Easy to install spent fuel rod in test; Less linkages than in conventional bending test setup such as three-point or four-point bending; Target the failure mode relevant to the fracture of spent fuel rod in transportation by focusing on pure bending; The continuous calibrations and modifications resulted in the third generation (3G) U-frame testing setup. Rigid arms are split along the LBB axis at rod sample ends. For each arm, this results in a large arm body and an end piece. Mating halves of bushings were modified into two V-shaped surfaces on which linear roller bearings (LRB) are embedded. The rod specimen is installed into the test fixture through opening and closing slide end-pieces. The 3G apparently has addressed major issues of setup identified in the previous stage and been proven to be eligible to be further pursued in this project. On the other hand, the purchase of universal testing machine or Bose dual LM2 TB was completed and the testing system was delivered to ORNL in August 2012. The preliminary confirmation of the system and on-site training were given by Bose field engineer and regional manager on 8/1-8/2/2012. The calibration of Bose testing system has been performed by ORNL because the integration of ORNL setup into the Bose TestBench occurred after the installation. Major challenge with this process arose from two aspects: 1) the load control involves two load cells, and 2) U-frame setup itself is a non-standard specimen. ORNL has been able to implement the load control through Cycle Indirect along with pinning the U-frame setup. Two meetings with ORNL hot-cell group (November 2012 and January 2013) were held to discuss the potential issues with both epoxy mounting of rigid sleeve and U-frame setup. Many suggestions were provided to make the procedure friendlier to the manipulator in hot cell. Addressing of these suggestions resulted in another cycle of modifications of both vise mold and setup. The initial meeting with ORNL I&C group occurred in November 2012 with regard to the Bose cable modification and design of central panel to integrate the cables and wires. The first round of cable modification and central panel fabrication was completed in February 2012. The testing with the modified cables exhibited substantial noises and the testing system was not shown to be stable. It was believed the cross talk was responsible to the noise, and a central panel with a better grounding and shielding was highly recommended. The central panel has been re-designed and fabricated in March 2013. In the subsequent period, the ORNL made substantial effort to debug the noises with the load cell channel, and to resolve the noises and nonlinearity with RDP LVDTs related to the integration of RDP LVDTs to Bose system. At the same time, ORNL has completed the verification tests of Bose test system, including cycle tests under reversal bending in load control, bending tests under monotonic load, and cycle test

  10. EIS-0021: Strategic Petroleum Reserve, Seaway Group Salt Domes, Brazoria County, Texas (also see EIS-0075-S and EIS-0029)

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy's Strategic Petroleum Reserve Office developed this statement to analyze the environmental impacts which would occur during site preparation and operation of oil storage facilities at each of five proposed candidate sites in the Seaway Group of salt domes.

  11. An archaeological survey of the proposed Camp Mohawk County Park in East-Central Brazoria County, Texas 

    E-Print Network [OSTI]

    Moore, William

    2015-06-12

    with terminations include 4 feathered, 1 hinge, and 1 step. One lip flake and thr ee biface thinning flakes are also represented. One flake is of opal or opalized wood, and the rest are of local gravels. One flake has been crazed from heat, and another...

  12. Shallow Flaws Under Biaxial Loading Conditions, Part II: Application of a Weibull Stress Analysis of the Cruciform Bend Specimen Using a Hydrostatic Stress Criterion

    SciTech Connect (OSTI)

    Bass, B.R.; McAfee, W.J.; Williams, P.T.

    1999-08-01

    Cruciform beam fracture mechanics specimensl have been developed in the Heavy Section Steel Technology (HSST) Program at Oak Ridge National Laboratory (ORNL) to introduce a prototypic, far- field, out-of-plane biaxird bending stress component in the test section that approximates the nonlinear biaxial stresses resulting from pressurized-thernxd-shock or pressure-temperature loading of a nuclear reactor pressure vessel (RPV). Matrices of cruciform beam tests were developed to investigate and quantify the effects of temperature, biaxial loading, and specimen size on fracture initiation toughness of two-dimensional (constant depth), shtdlow, surface flaws. Tests were conducted under biaxial load ratios ranging from uniaxial to equibiaxial. These tests demonstrated that biaxial loading can have a pronounced effect on shallow-flaw fracture toughness in the lower transition temperature region for RPV materials. Two and three- parameter Weibull models have been calibrated using a new scheme (developed at the University of Illinois) that maps toughness data from test specimens with distinctly different levels of crack-tip constraint to a small scale yielding (SSY) Weibull stress space. These models, using the new hydrostatic stress criterion in place of the more commonly used maximum principal stress in the kernel of the OW integral definition, have been shown to correlate the experimentally observed biaxiaI effect in cruciform specimens, thereby providing a scaling mechanism between uniaxial and biaxial loading states.

  13. A high sensitivity fiber optic macro-bend based gas flow rate transducer for low flow rates: Theory, working principle, and static calibration

    SciTech Connect (OSTI)

    Schena, Emiliano; Saccomandi, Paola; Silvestri, Sergio [Center for Integrated Research, Unit of Measurements and Biomedical Instrumentation, Universita Campus Bio-Medico di Roma, Via Alvaro del Portillo, 21, 00128 Rome (Italy)

    2013-02-15

    A novel fiber optic macro-bend based gas flowmeter for low flow rates is presented. Theoretical analysis of the sensor working principle, design, and static calibration were performed. The measuring system consists of: an optical fiber, a light emitting diode (LED), a Quadrant position sensitive Detector (QD), and an analog electronic circuit for signal processing. The fiber tip undergoes a deflection in the flow, acting like a cantilever. The consequent displacement of light spot center is monitored by the QD generating four unbalanced photocurrents which are function of fiber tip position. The analog electronic circuit processes the photocurrents providing voltage signal proportional to light spot position. A circular target was placed on the fiber in order to increase the sensing surface. Sensor, tested in the measurement range up to 10 l min{sup -1}, shows a discrimination threshold of 2 l min{sup -1}, extremely low fluid dynamic resistance (0.17 Pa min l{sup -1}), and high sensitivity, also at low flow rates (i.e., 33 mV min l{sup -1} up to 4 l min{sup -1} and 98 mV min l{sup -1} from 4 l min{sup -1} up to 10 l min{sup -1}). Experimental results agree with the theoretical predictions. The high sensitivity, along with the reduced dimension and negligible pressure drop, makes the proposed transducer suitable for medical applications in neonatal ventilation.

  14. NESC VII European project: demonstration of warm pre-stressing effect in biaxial loading conditions - Bending tests on 18MND5 cruciform specimens and their interpretation

    SciTech Connect (OSTI)

    Jacquemoud, C.; Yuritzinn, T.; Marie, S.

    2012-07-01

    In the framework of the NESC VII European project, a large experimental program has been dedicated to characterize the Warm Pre-Stressing (WPS) effect in different testing configurations. One of the CEA (France) contributions to this project is the realization of five point bending tests on large cruciform specimens considering different WPS loading cycles. The five cruciform specimens, sponsored by EDF (France) and IRSN (France), are made of 18MND5 steel. Two of them have been tested on a same LCF (Load-Cool-Fracture) loading cycle and two others on the same LCTF (Load-Cool-Transient-Fracture) loading cycle. The experimental results presented in this paper give a successful demonstration of the WPS effect in biaxial loading conditions either on a LCF or on a LCTF cycle. During the test interpretations, different models have then been tested and compared in order to evaluate their ability to predict the cleavage fracture in the case of different WPS loading cycles. They all provide very conservative predictions whatever loading cycle is concerned. (authors)

  15. State-to-state photodissociation of carbonyl sulfide ({nu}{sub 2}=0,1|JlM). II. The effect of initial bending on coherence of S({sup 1}D{sub 2}) polarization

    SciTech Connect (OSTI)

    Brom, Alrik J. van den; Rakitzis, T. Peter; Janssen, Maurice H. M. [Laser Center and Department of Chemistry, Vrije Universiteit, de Boelelaan 1083, 1081 HV Amsterdam (Netherlands); Department of Physics, University of Crete, Heraklion 71110, Greece and Institute of Electronic Structure and Laser of the Foundation for Research and Technology-Hellas (IESL-FORTH), P.O. Box 1527, 71110 Heraklion (Greece); Laser Center and Department of Chemistry, Vrije Universiteit, de Boelelaan 1083, 1081 HV Amsterdam (Netherlands)

    2005-10-22

    Photodissociation studies using ion imaging are reported, measuring the coherence of the polarization of the S({sup 1}D{sub 2}) fragment from the photolysis of single-quantum state-selected carbonyl sulfide (OCS) at 223 and 230 nm. A hexapole state-selector focuses a molecular beam of OCS parent molecules in the ground state ({nu}{sub 2}=0 vertical bar JM=10) or in the first excited bending state ({nu}{sub 2}=1 vertical bar JlM=111). At 230 nm photolysis the Im[a{sub 1}{sup (1p}{sub arallel}{sup ,perpendicular})] moment for the fast S({sup 1}D{sub 2}) channel increases by about 50% when the initial OCS parent state changes from the vibrationless ground state to the first excited bending state. No dependence on the initial bending state is found for photolysis at 223 nm. We observe separate rings in the slow channel of the velocity distribution of S({sup 1}D{sub 2}) correlating to single CO(J) rotational states. The additional available energy for photolysis at 223 nm is found to be channeled mostly into the CO(J) rotational motion. An improved value for the OC-S bond energy D{sub 0}=4.292 eV is reported.

  16. EIS-0473: DOE Notice of Availability of a Draft Environmental...

    Office of Environmental Management (EM)

    Notice of Availability of a Draft Environmental Impact Statement W.A. Parish Post-Combustion CO2 Capture and Sequestration Project, Fort Bend County, TX DOE announces the...

  17. EIS-0473: EPA Notice of Availability of a Draft Environmental...

    Broader source: Energy.gov (indexed) [DOE]

    Post-Combustion CO2 Capture and Sequestration Project, Fort Bend County, TX EPA announces the availability of the W.A. Parish Post-Combusion CO2 W.A. Parish Post-Combustion CO2...

  18. EIS-0473: Record of Decision | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EIS-0473: Record of Decision EIS-0473: Record of Decision W.A. Parish Post-Combustion CO2 Capture and Sequestration Project, Fort Bend County, Texas DOE announces its decision to...

  19. EIS-0021: Final Environmental Impact Statement

    Broader source: Energy.gov [DOE]

    Strategic Petroleum Reserve, Seaway Group Salt Domes, Brazoria County, Texas (also see EIS-0075-S and EIS-0029)

  20. Feasibility Study of Economics and Performance of Solar Photovoltaics at the Former Fort Ord Army Base Site in Marina, California. A Study Prepared in Partnership with the Environmental Protection Agency for the RE-Powering America's Land Initiative: Siting Renewable Energy on Potentially Contaminated Land and Mine Sites

    SciTech Connect (OSTI)

    Stoltenberg, B.; Konz, C.; Mosey, G.

    2013-05-01

    The U.S. Environmental Protection Agency (EPA), in accordance with the RE-Powering America's Land initiative, selected the Former Fort Ord Army Base (FOAB) site in Marina, California, for a feasibility study of renewable energy production. The National Renewable Energy Laboratory (NREL) provided technical assistance for this project. The purpose of this report is to assess the site for a possible photovoltaic (PV) system installation and estimate the cost, performance, and site impacts of different PV options. In addition, the report recommends financing options that could assist in the implementation of a PV system at the site.

  1. Wildlife Biologists Open Pool Fort Wainwright, Donnelly,

    E-Print Network [OSTI]

    , including a main post area of 4,470 acres, 8,825 acres of ranges, and over 890,000 acres of military

  2. About Fort Collins About Colorado State University

    E-Print Network [OSTI]

    Collins are the museum, the public library, the civic symphony, and the University's own University Center 2014-2015 ALL STATEMENTS MADE IN THIS AND SIMILAR PUBLICATIONS DISTRIBUTED GENERALLY TO PROSPECTIVE course or program or to perform any other activity, function, or obligation mentioned in this catalog

  3. Fort D.A. Russell, Wyo. 

    E-Print Network [OSTI]

    Unknown

    2011-09-05

    military education institutions, primarily the Skelton Panel, Chiefs of Staff of the Air Force, and ACSC Commandants. Many minor changes were made to the ACSC curriculum during this time. Significant curricular changes made were not lasting changes. New...

  4. Fort Bliss Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View New PagesSustainable Urban Transport JumpFlowood,PevafersaMapFile

  5. Cove Fort Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LISTStar EnergyLawler,CoalConcordiaConsumerLEDS Tier I ActivitiesCoulombCovalent

  6. Fort Totten Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoopButtePowerEdistoWhiskeyFootprint Ventures Jump

  7. The Chemical Composition of Some Soils of Angelina, Brazoria, Cameron, Cherokee, Delta, Lamar, Hidalgo, Lavaca, Montgomery, Nacogdoches, Robertson, Rusk, Webb and Wilson Counties. 

    E-Print Network [OSTI]

    Fraps, G. S. (George Stronach)

    1909-01-01

    and texture and showing a yellowish gray color. The ~rganic matter contained in the first few inches gives the surface soil a grayish color. The topography is rolling with excellent surface drainage. The soil is f*-,;:ly retentive of moisture, and when... overflows. T11e principal timber growth is pecan and ash. This is one of the most desirable soils of the bottom, as it is very fertile. has good drainage, and is easily cultivated. ll'rost of it is under cultivation at present. Sugar cane is thc principal...

  8. Sensing bending in a compliant biomimetic fish

    E-Print Network [OSTI]

    Kaczmarek, Adam S

    2006-01-01

    This thesis examines the problem of sensing motion in a compliant biomimetic device. Specifically, it will examine the motion of a tail in a biomimetic fish. To date, the fish has been an open-loop system, the motion of ...

  9. Fermilab Today | Indiana University South Bend Profile

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Encapsulation of various detector components for deployment in bubble chamber. Radon emanation and diffusion measurements. PARTICLE PHYSICS RESEARCH FOCUS: Search for WIMP...

  10. Modeling the SS 433 Jet Bends

    E-Print Network [OSTI]

    Canizares, Claude R.

    We fit Chandra HETGS data obtained for the unusual X-ray binary SS 433. While line strengths and continuum levels hardly change, the jet Doppler shifts show aperiodic variations that probably result from shocks in interactions ...

  11. Horseshoe Bend Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsource History View NewGuam: Energyarea,Magazine Jump to:II Wind Farm

  12. Property:BendingMeasurement | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsourceII JumpQuarterly SmartDB-2,InformationAwardee Jump to:Beam(m) Jump to:Property

  13. EIS-0464: DOE Notice of Availability of the Draft Environmental...

    Office of Environmental Management (EM)

    Notice of Availability of the Draft Environmental Impact Statement Lake Charles Carbon Capture and Sequestration Project, Lake Charles, Louisiana and Brazoria County, Texas DOE...

  14. EIS-0464: EPA Notice of Availability of Final Environmental Impact...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EPA Notice of Availability of Final Environmental Impact Statement Lake Charles Carbon Capture and Sequestration Project, Lake Charles, Louisiana and Brazoria County, Texas EPA...

  15. EIS-0464: EPA Notice of Availability of the Draft Environmental...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Notice of Availability of the Draft Environmental Impact Statement Lake Charles Carbon Capture and Sequestration Project, Lake Charles, Louisiana and Brazoria County, Texas The...

  16. EIS-0487: EPA Notice of Availability of Draft Environmental Impact...

    Energy Savers [EERE]

    EIS-0487: EPA Notice of Availability of Draft Environmental Impact Statement Freeport LNG Liquefaction Project, Brazoria County, Texas EPA announces the availability of the...

  17. Update On Geothermal Exploration At Fort Bidwell, Surprise Valley

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page| Open Energy Information Serbia-EnhancingEt Al.,Turin, New York:Power CompanyCROSS-VALIDATION OF SWERA'sCalifornia |

  18. Colorado State University, Fort Collins, CO Weather Station

    E-Print Network [OSTI]

    ). This ranks as the 2nd snowiest water year (Oct-Jan) in the 122 year record. Note: Water year 1980 (Oct Year: 2010 Report created by: Wendy Ryan Temperature: Mean Tmax was 43.3 which is 1.3 degrees above normal for the month. This ranks as the 48th warmest in the 122 year record (1889-2010) tied with 1941

  19. Indiana University Purdue University Fort Office of International Education

    E-Print Network [OSTI]

    Hamburger, Peter

    Email 24 Postal mail 24 Telephone 24 RETURNING HOME 25 Study Abroad Program Evaluation 25 Study Abroad will also learn to see yourself and your culture in a different light. Remember to keep an open mind while things in mind as you prepare for your journey overseas: 1. "If you want to feel at home, stay at home

  20. Energy Department Recognizes Fort Worth for Leadership in Advancing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    by 39 percent and cutting electricity bills by 2.5 million each year. The plant's anaerobic digester captures and recycles methane gas to generate 75 percent of the...

  1. Continuous Commissioning® of the Dallas/Fort Worth International Airport 

    E-Print Network [OSTI]

    Yazdani, B.; Schroeder, F.; Kramer, L.; Baltazar, J. C.; Turner, W. D.; Wei, G.; Deng, S.; Henson, R.; Dennis, J. R.; T., R.

    2008-01-01

    savings from the CC work. The savings are approximately $60,000 (?40,000) for nine months. Projected 12-month savings are $80,000 (?53,000), representing a savings of approximately $1 per square foot per year (?6.2/m 2 per year). There are still... load causes this building to ?peak? at night. The savings from the CC process are in excess of 18% of the total building energy consumption, including lighting. The dollar savings amounted to about $0.80 per ft2 or ?5.50 per m2). DFW...

  2. Energy Management Practices at Dalls/Fort Worth International Airport 

    E-Print Network [OSTI]

    Dennis, J. R.

    2013-01-01

    ? Energy & Utilities Services Business Unit ? Energy Management Section ? Energy Manager ? Energy Engineer ? Energy Analyst ? Designer (CADD and GIS Support) ? Electrical Supervisor (27 employees) ? SEAMS Scheduler Energy Management Mission..., October 9, 2013 Supply-Side Management (cont.) ? Environmental Stewardship ? Electricity ? Onsite Renewable ? Wind ? Economically, geographically and operationally not practical ? Solar ? Economically not practical unless heavily subsidized...

  3. Contrasting Eruption Styles Of The 147 Kimberlite, Fort A La...

    Open Energy Info (EERE)

    main infill. Finally, blocks of the main infill tilted and possibly slumped into the subsidence structure developed above the emptied explosion chamber of 147. The different...

  4. Development of Baseline Monthly Utility Models for Fort Hood, Texas 

    E-Print Network [OSTI]

    Reddy, T. A.; Saman, N. F.; Claridge, D. E.; Haberl, J. S.; Turner, W. D.; Chalifoux, A.

    1996-01-01

    ) + f3 c * DD(r J (3) where DD (r ) are the degree-days to the base r, and the subscripts c and h stand for cooling and heating respectively. Note that eqs. (1) and (2) represent a model with three regression parameters, i.e, a 3-P model, while eq...

  5. Colorado State University, Fort Collins, CO Weather Station

    E-Print Network [OSTI]

    as the 3rd warmest in the 122 year record (1889-2010). The most recent year it was this warm or greater Year: 2010 Report created by: Wendy Ryan Temperature: Mean Tmax was 67.8 which is 3.6 degrees above normal for the month. This ranks as the 22nd warmest in the 122 year record (1889-2010) tied with 1907

  6. corbin des ign Indiana University-Purdue University Fort Wayne

    E-Print Network [OSTI]

    Hamburger, Peter

    Design MP18076 Silver Cup Metallic --- --- Cool Gray 11 MP00584 --- 03 Silver Metallic COLOR PALETTE 02. Removable, gravity lock, 1/8" (th.) non-glare acrylic lens. 1/8" (th.) painted acrylic backer panel

  7. Fort Yukon, Chalkyitsik, & Venetie Biomass Boiler Feasibility Study

    SciTech Connect (OSTI)

    Greg Koontz, ME William A. Wall, PhD

    2009-03-31

    The Council of Athabascan Tribal Governments (CATG) is a consortium of ten Gwich'in and Koyukon Athabascan tribes settled in 10 remote villages and are linked by the Yukon River System. The CATG mission is to maintain the Yukon Flats region as Indian Country by asserting traditional rights and taking responsibility for developing tribal technical capacity to manage the land and resources. It is the intent of CATG to explore and develop all opportunities for a renewable and self-sufficient energy program for each of the villages. CATG envisions utilization of forest resources both for construction and energy as one of the best long-term strategies for integrating the economic goals for the region as well as supporting the cultural and social issues. The intent for this feasibility project is to focus specifically on biomass utilization for heat, first, and for future electrical generation within the region, second. An initial determination has already been made regarding the importance of wood energy as a primary source of renewable energy to displace diesel fuel in the Yukon Flats region. A desktop study of other potential renewable resources was conducted in 2006.

  8. ASSIMILATION DE DONNES POUR LES FEUX DE FORT

    E-Print Network [OSTI]

    internationale #12;CADRE Combustion CERFACS - UMD · Global Change · CFD · Aviation & Environnement 3 équipes Dept. 7 septembre 2010 #12;CADRE Combustion · Double cursus INSA-UPS · 6 mois de stage (février à aoûtPropagation de la flamme Large échelle COMBUSTIONCOMBUSTION Zone de combustion Topologie de front #12

  9. Fort Drum integrated resource assessment. Volume 1, Executive summary

    SciTech Connect (OSTI)

    Dixon, D.R.; Armstrong, P.R.; Daellenbach, K.K.

    1993-09-01

    Some of the most difficult problems that a federal site has in reducing its energy consumption in a cost-effective manner revolve around understanding where the energy is being used, and what technologies could be employed to decrease the energy use. Many large federal sites have one or two meters to track electric energy use for several thousand buildings and numerous industrial processes. Even where meters are available on individual buildings or family housing units, the meters are not consistently read. When the federal energy manager has been able to identify high energy users, he or she may not have the background, training, or resources to determine the most cost-effective options for reducing this energy use. This can lead to selection of suboptimal projects that prevent the site from achieving the full life-cycle cost savings. The US Department of Energy (DOE) Federal Energy Management Program (FEMP), supported by the Pacific Northwest Laboratory (PNL), has developed a model program that provides a systematic approach to evaluating energy opportunities that (1) identifies the building groups and end uses that use the most energy (not just have the greatest energy-use intensity), and (2) evaluates the numerous options for retrofit or installation of new technology that will result in the selection of the most cost-effective technologies. In essence, this model program provides the federal energy manager with a roadmap to significantly reduce energy use in a planned, rational, cost-effective fashion that is not biased by the constraints of the typical funding sources available to federal sites. The results from this assessment process can easily be turned into a five- to ten-year energy management plan that identifies where to start and how to proceed in order to reach the mandated energy consumption targets.

  10. Savings Report for the Fort Hood Army Base 

    E-Print Network [OSTI]

    Song, S.; Liu, Z.; Cho, S.; Baltazar-Cervantes, J. C.; Haberl, J. S.

    2005-01-01

    ,740 6,439 6,439 100.0% 0 0 87022 ENLISTED UPH 42,306 23,936 23,936 100.0% 54 54 100.0% 85020 COMMISARY 105,659 165,961 36,107 21.8% 470 156 33.2% 26 11,822 2,572 21.8% 1 39 13 33.2% 28000 1ST CAV 129,635 300,217 300,217 100.0% 0 0 33001 MEDAC 38,406 118...

  11. City of Fort Wayne 2014 Award Nomination: Public Spaces

    E-Print Network [OSTI]

    Hamburger, Peter

    are permanent and most are located in public spaces that are easily visible from the road and accessible #12;OUTCOMES · Tourism increased due to additional statewide and regional recognition in magazines

  12. 1490 Campus Delivery Fort Collins, Colorado 80523-1490

    E-Print Network [OSTI]

    and innovative environmental practices and partnerships that promote the quality of life and increase efficiencies without compromising mission success. A panel of judges with relevant expertise, education; environmental quality; sustainability; environmental restoration; cultural resources management

  13. Renewable Energy Development on Fort Mojave Reservation Feasiblity Study

    SciTech Connect (OSTI)

    Russell Gum, ERCC analytics LLC

    2008-03-17

    The Ft. Mojave tribe, whose reservation is located along the Colorado River in the states of Arizona, California, and Nevada near the point where all three states meet, has a need for increased energy supplies. This need is a direct result of the aggressive and successful economic development projects undertaken by the tribe in the last decade. While it is possible to contract for additional energy supplies from fossil fuel sources it was the desire of the tribal power company, AHA MACAV Power Service (AMPS) to investigate the feasibility and desirability of producing power from renewable sources as an alternative to increased purchase of fossil fuel generated power and as a possible enterprise to export green power. Renewable energy generated on the reservation would serve to reduce the energy dependence of the tribal enterprises on off reservation sources of energy and if produced in excess of reservation needs, add a new enterprise to the current mix of economic activities on the reservation. Renewable energy development would also demonstrate the tribe’s support for improving environmental quality, sustainability, and energy independence both on the reservation and for the larger community.

  14. U.S. Army Fort Carson Photovoltaics Project Lease

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solar I, LLC, 31897 Del Obispo, Suite 224 Sun Juan Capistrano, CA 92675 and, if to the United States, to the District Engineer, U.S. Army Corps of Engineers, Omaha District,...

  15. A Comparative Study of the Mississippian Barnett Shale, Fort...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    III. Because type II kerogen generates a greater quantity of hydrocarbons and at a lower temperature, the conversion of Barnett organic matter to natural gas was probably a more...

  16. Geographic Information System At Cove Fort Area - Vapor (Nash...

    Open Energy Info (EERE)

    Gregory D. Nash, Christopher Kesler, Michael C. Adam (2002) Geographic Information Systems- Tools For Geotherm Exploration, Tracers Data Analysis, And Enhanced Data...

  17. 1490 Campus Delivery Fort Collins, Colorado 80523-1490

    E-Print Network [OSTI]

    by the Deputy to the Garrison Commander, Mr. Mark Hamelin (Thanks to everyone for taking care of this important issue). Mr. Hazebrook's efforts afforded him commendations from the Garrison Commander, COL Donna

  18. Development of Baseline Monthly Utility Models for Fort Hood, Texas 

    E-Print Network [OSTI]

    Reddy, T. A.; Saman, N. F.; Claridge, D. E.; Haberl, J. S.; Turner, W. D.; Chalifoux, A.

    1996-01-01

    -available weather data for Temple, Texas covered only through May 1994. In view of the objectives of this study, it was decided to limit the present analysis at the cantonment area level from January 1989 to December 1993 data only. the effects of parameters... of the presence of functional discontinuities, called "change points". A widely adopted convention is to refer to a single variable model with, say, three parameters as a 3-P SV model. This study will limit itself to SV models only, and consequently the term...

  19. Cloud Peak-Fort McKinney folio, Wyoming 

    E-Print Network [OSTI]

    Darton, Nelson Horatio, 1865-1948.; Salisbury, Rollin D., 1858-1922.

    1906-01-01

    Overall soil productivity is declining in the U.S. due to loss of soil organic matter (SOM). Decreased SOM lowers soil water storage, reduces water infiltration, slows aggregate formation, and depletes soil of nutrients. ...

  20. NOUVELLE PUBLICATION SCIENTIFIQUE Des les dans la fort tropicale humide

    E-Print Network [OSTI]

    van Tiggelen, Bart

    tropicales. Rostain demuestra que estas poblaciones eran capaces de desarrollar una agricultura intensiva en camellones, -la cual sustentaba una densidad demográfica significativa-, y construir senderos, montículos

  1. Fort Rucker UESC Energy Conservation Project, Completed Dec....

    Energy Savers [EERE]

    the existing 40 ton DX * Replaced the AHU * Replaced the steam boiler with hot water boiler * Installed Controls * Installed dedicated AHU to serve a meeting room * Solved...

  2. DOE - Office of Legacy Management -- Fort St Vrain - 011

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal Gas &SCE-SessionsSouth Dakota Edgemont, SouthLaboratoryDiv - NYCorp-Fordham University

  3. Fort Belvoir, Virginia: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View New PagesSustainable Urban Transport JumpFlowood,PevafersaMapFile JumpTestingForseo

  4. Fort Bliss, Texas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View New PagesSustainable Urban Transport JumpFlowood,PevafersaMapFileBliss, Texas: Energy

  5. Fort Carson, Colorado: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View New PagesSustainable Urban Transport JumpFlowood,PevafersaMapFileBliss, Texas: EnergyCarson,

  6. Fort Collins, Colorado: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View New PagesSustainable Urban Transport JumpFlowood,PevafersaMapFileBliss, Texas:

  7. Fort Defiance, Arizona: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View New PagesSustainable Urban Transport JumpFlowood,PevafersaMapFileBliss, Texas:Jump to:

  8. Fort Devens, Massachusetts: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View New PagesSustainable Urban Transport JumpFlowood,PevafersaMapFileBliss, Texas:Jump to:Devens,

  9. Fort Hunt, Virginia: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View New PagesSustainable Urban Transport JumpFlowood,PevafersaMapFileBliss, Texas:Jump

  10. Fort Knox, Kentucky: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View New PagesSustainable Urban Transport JumpFlowood,PevafersaMapFileBliss, Texas:JumpKnox,

  11. Fort Lee, New Jersey: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View New PagesSustainable Urban Transport JumpFlowood,PevafersaMapFileBliss, Texas:JumpKnox,Lee,

  12. Fort McKinley, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View New PagesSustainable Urban Transport JumpFlowood,PevafersaMapFileBliss,

  13. Fort Meade, Maryland: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View New PagesSustainable Urban Transport JumpFlowood,PevafersaMapFileBliss,Meade, Maryland: Energy

  14. Fort Ripley, Minnesota: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View New PagesSustainable Urban Transport JumpFlowood,PevafersaMapFileBliss,Meade, Maryland:

  15. Fort Rucker, Alabama: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View New PagesSustainable Urban Transport JumpFlowood,PevafersaMapFileBliss,Meade, Maryland:Rucker,

  16. Fort Salonga, New York: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View New PagesSustainable Urban Transport JumpFlowood,PevafersaMapFileBliss,Meade,

  17. Fort Snelling, Minnesota: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View New PagesSustainable Urban Transport JumpFlowood,PevafersaMapFileBliss,Meade,Snelling,

  18. Fort Washington, Pennsylvania: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View New PagesSustainable Urban Transport

  19. Fort Worth, Texas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View New PagesSustainable Urban Transport

  20. Geothermometry At Fort Bliss Area (DOE GTP) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View New PagesSustainable UrbanKentucky:Bore TechnologiesAssessmentOpenFish Lake Valley Area

  1. Spontaneous Potential At Fort Bidwell Area (Laney, 2005) | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page| Open Energy Information Serbia-Enhancing CapacityVectren) Jump to:Spill Prevention and

  2. Multispectral Imaging At Fort Bliss Area (DOE GTP) | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland: EnergyInformationOliver, Pennsylvania:(CTI PFAN)Open EnergyOpen

  3. NREL: Continuum Magazine - Helping Fort Carson Meet DOD Energy Goals

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass map shines light on771/6/14 Contact:NewsWebmaster Please enter yoursolar array in a

  4. SPIDERS Phase 2 Fort Carson Technology Transition Consolidated Report |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURINGEnergy BillsNo. 195 -Rob Robertseere.energy.govFreedom ofDepartment of Energy

  5. City of Fort Collins, Colorado (Utility Company) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LISTStar Energy LLCLtdEllsworth, Iowa (UtilityCollins Utilities Smart Grid

  6. City of Fort Morgan, Colorado (Utility Company) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LISTStar Energy LLCLtdEllsworth, Iowa (UtilityCollins Utilities Smart GridMorgan,

  7. Fort Belknap Electric Coop Inc | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LISTStar2-0057-EA Jump to:ofEnia SpAFlex Fuels EnergyTool

  8. Town of Fort Laramie, Wyoming (Utility Company) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoop Inc JumpHeterInformation PolicyTinnaBraman, OklahomaTownInformation

  9. Radiometrics At Fort Bliss Area (DOE GTP) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to:EA EIS Report UrlNM-b < RAPID‎ |RENERCO

  10. Town of Fort Supply, Oklahoma (Utility Company) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to:EA EISTJThin Film Solar TechnologiesCFRTopTenDanvers, MA) JumpTown of

  11. City of Fort Pierre, South Dakota (Utility Company) | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmentalBowerbank,CammackFLIRChurchFontanelle, Iowa (Utility Company) Jump to:City of

  12. Fort Collins - Green Building Requirement for City-Owned Buildings |

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i nA Guide to Tapping into Funding forFY'17andPurchased energyEnergyFactA

  13. Fort Collins Utilities - Home Efficiency Program | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i nA Guide to Tapping into Funding forFY'17andPurchased energyEnergyFactA<

  14. Fort Defiance, Arizona: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoopButtePowerEdistoWhiskeyFootprint Ventures Jump to:45Development

  15. Fort Lauderdale, Florida: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoopButtePowerEdistoWhiskeyFootprint Ventures Jump to:45DevelopmentLauderdale, Florida:

  16. Fort Lupton, Colorado: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoopButtePowerEdistoWhiskeyFootprint Ventures Jump to:45DevelopmentLauderdale,

  17. Fort Wayne, Indiana: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoopButtePowerEdistoWhiskeyFootprint Ventures JumpIndiana: Energy Resources Jump to:

  18. Multispectral Imaging At Cove Fort Area (Laney, 2005) | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsourceII Jump to: navigation, searchsource

  19. City of Fort Collins, Colorado (Utility Company) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoopButte County,Camilla,ThermalCuba City, Wisconsin (Utility Company)CityCityCity

  20. City of Fort Collins Comment on Information Collection Extension, October

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i n c i p aDepartment of Energy < Back EligibilityEnergy2011 |