National Library of Energy BETA

Sample records for format purpose provide

  1. (U) modulator to provide a continuous stepped frequency signal format

    DOE Patents [OSTI]

    Walters, Glenn A. (Escondido, CA)

    1991-01-01

    A modulator provides a continuous signal format composed of discrete freqcy steps and is designed to eliminate frequency overlap or smearing normally associated with filter ringing.

  2. Holt Marine Education Fund Purpose: To foster education in the marine sciences by providing financial support

    E-Print Network [OSTI]

    Wright, Dawn Jeannine

    Holt Marine Education Fund Purpose: To foster education in the marine sciences by providing financial support to undergraduate or graduate students pursuing marine science studies. The request should have definite educational output for a course, public education, extension, etc. and be marine related

  3. Numerical studies of galaxy formation using special purpose hardware

    E-Print Network [OSTI]

    Matthias Steinmetz

    2002-01-25

    I review recent progress in numerically simulating the formation and evolution of galaxies in hierarchically clustering universes. Special emphasis is given to results based on high-resolution gas dynamical simulations using the N-body hardware integrator GRAPE. Applications address the origin of the spin of disk galaxies, the structure and kinematics of damped Lyman-alpha systems, and the origin of galaxy morphology and of galaxy scaling laws.

  4. Purpose

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Why, or why not? Would it be as good as the beans or spinach that we eat? Explanation Data on the side of a TOTAL cereal box indicates that one ounce (34 cup) provides 100% of...

  5. 03.612 Time Off for Voting. 1. Purpose. To provide staff members a reasonable period of time off

    E-Print Network [OSTI]

    03.612 Time Off for Voting. 1. Purpose. To provide staff members a reasonable period of time off a reasonable period of time off during the regular work day for voting on an official election day. This time should be reported as time worked and is not charged against vacation leave, comp time or salary

  6. Resistivity measurements at the bit provide real-time formation evaluation before invasion

    SciTech Connect (OSTI)

    Bergt, D.

    1995-06-01

    Real-time formation evaluation with today`s conventional horizontal drilling techniques is limited by the distance between the bit and resistivity measurements. Logging-while-drilling (LWD) sensors reach the formation long before wireline measurements, and so generally view it before wellbore degradation, but not before some invasion has occurred. Rapid invasion, called spurt, may mask true resistivity in some formations. The solution to this problem is to relocate logging measurements to the bit itself. A new LWD resistivity tool improves and simplifies formation evaluation by allowing geologists to visualize and log the formation around the wellbore before mud invasion or wellbore damage has occurred. The tool is normally run as a near-bit stabilizer on a rotary bottomhole assembly or just above the motor in a steerable assembly. It makes five formation evaluation resistivity measurements and an azimuthal gamma ray measurement. This paper reviews the performance of this tool.

  7. Blog Learning Project* Silver Level of Recognition Purpose: The Blog Learning Project provides students with the opportunity to utilize written language to clearly

    E-Print Network [OSTI]

    Illinois at Chicago, University of

    Blog Learning Project* ­ Silver Level of Recognition Purpose: The Blog Learning Project provides of their UIC Experiences. The written blog will perform three functions: 1) describe the nature of the UIC Experience. The blog will utilize written language to convey meaning. Instructions for the Blog Learning

  8. 03.110 Electronic Funds Transfer (EFT) of Salary. 1. Purpose. To provide a service to University of North Texas System

    E-Print Network [OSTI]

    03.110 Electronic Funds Transfer (EFT) of Salary. 1. Purpose. To provide a service to University to participate must complete and sign an Authorization Agreement for Electronic Funds Transfer of Salary Form Controller to electronically deposit an employee's salary directly to their account and to initiate

  9. Mentoring Blog Learning Project* Platinum Level of Recognition Purpose: The Mentoring Blog Learning Project provides you with the opportunity to mentor two other UIC

    E-Print Network [OSTI]

    Illinois at Chicago, University of

    Mentoring Blog Learning Project* ­ Platinum Level of Recognition Purpose: The Mentoring Blog to earn a UIC Experience Certificate. The Mentoring Blog Project consists of approaching two other UIC to earn a UIC Experience Certificate. You will then submit a written blog in which you describe your

  10. The purpose of this survey is to gather information needed to develop guidelines for ecological restoration project planning in Minnesota. We are asking you to provide cost and time estimates for site preparation,

    E-Print Network [OSTI]

    Sprott, Julien Clinton

    1 The purpose of this survey is to gather information needed to develop guidelines for ecological indicate which services & supplies are provided in-house, purchased/ hired out, or not offered or performed to page 7. Provided In-House Purchased/ Hired out Not Offered/ Not Performed A. Project Management

  11. This flowchart is meant to provide a suggested general overview of how Non-Resident Alien for tax purposes can complete their Federal tax filing requirements. (Normally, individuals who have resided in the U.S. for less than 5

    E-Print Network [OSTI]

    Snider, Barry B.

    This flowchart is meant to provide a suggested general overview of how Non-Resident Alien for tax are considered Non-Resident Aliens for tax purposes. Please consult I.R.S. Publication 519: U.S. Tax Guide for Aliens.) Did you claim a tax treaty for 2014? AND/OR Did you receive other taxable income or scholarship

  12. 2011 USGS Annual Ethics Training Ethics training is being provided this year in document format so that certain USGS-specific

    E-Print Network [OSTI]

    INTERESTS CERTIFICATION As part of their entry onto duty process, all USGS employees must sign1 2011 USGS Annual Ethics Training Ethics training is being provided this year in document format@usgs.gov In accordance with Office of Government (OGE) regulations, all annual ethics training must include the 14

  13. I. Purpose

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EPAct 2005 Section 242 Program I. Purpose In the Energy Policy Act of 2005 (EPAct 2005; Public Law 109-58) Congress established a new program to support the expansion of hydropower...

  14. Disclaimer: this is a translation of the Selection Announcement for PhD Courses. Its purpose is to provide information to foreign students. It has no legal value. The only official and legally binding

    E-Print Network [OSTI]

    Cesare, Bernardo

    Disclaimer: this is a translation of the Selection Announcement for PhD Courses. Its purpose.unipd.it/ricerca/dottorati-di-ricerca/bandi-e-graduatorie PHD COURSES SELECTION ANNOUNCEMENT 29th CYCLE Art. 1 ­ PURPOSE The University of Padova has opened the PhD Courses listed in Appendix 1 for the 2013/2014 Academic Year, 29th Cycle. Appendix 1

  15. The Dennis Cesarotti Scholarship in Safety and Industrial Hygiene The purpose of this fund is to provide financial support towards tuition and other educational related expenses for a senior

    E-Print Network [OSTI]

    Kostic, Milivoje M.

    The Dennis Cesarotti Scholarship in Safety and Industrial Hygiene The purpose of this fund in the safety area of study OR who have completed Industrial Hygiene (TECH 437) Candidates must have a minimum student who is seeking an undergraduate degree in the Industrial Management &Technology, Environmental

  16. Disclaimer: this is a translation of the Selection Announcement for PhD Courses. Its purpose is to provide information to foreign students. It has no legal value. The only official and legally binding

    E-Print Network [OSTI]

    Cesare, Bernardo

    Disclaimer: this is a translation of the Selection Announcement for PhD Courses. Its purpose.unipd.it/ricerca/dottorati-di-ricerca/bandi-e-graduatorie SELECTION ANNOUNCEMENT FOR ADMISSION TO THE PHD COURSE IN HISTORICAL, GEOGRAPHICAL AND ANTHROPOLOGICAL opened a PhD Course in Historical, Geographical and Anthropological Studies. This selection announcement

  17. Disclaimer: this is a translation of the Selection Announcement for PhD Course. Its purpose is to provide information to foreign students. It has no legal value. The only official and legally binding

    E-Print Network [OSTI]

    Cesare, Bernardo

    Disclaimer: this is a translation of the Selection Announcement for PhD Course. Its purpose.unipd.it/ricerca/dottorati-di-ricerca/bandi-e-graduatorie INTERNATIONAL PHD COURSE IN FUSION SCIENCE AND ENGINEERING in agreement with UNIVERSITÀ DEGLI STUDI DI NAPOLI of Padova publishes the Selection Announcement for admission to the PhD Course in Fusion science

  18. A Bill to amend the Internal Revenue Code of 1986 to provide incentives for domestic oil and natural gas exploration and production, and for other purposes. Introduced in the House of Representatives, One Hundred Third Congress, First Session, February 22, 1993

    SciTech Connect (OSTI)

    Not Available

    1993-01-01

    This Act may be cited as the [open quotes]Energy Independence, Infrastructure, and Investment Act of 1993[close quotes]. The purpose of this Bill is to amend the Internal Revenue Code of 1986 to provide incentives for domestic oil and natural gas exploration and production, and for other purposes. Title I of this Bill is Energy Independence Incentives. Title II is Infrastructure Incentives. Title III is Investment Incentives.

  19. S. 2166: A bill to reduce the Nation's dependence on imported oil, to provide for the energy security of the Nation, and for other purposes, introduced in the United States Senate, One Hundred Second Congress, Second Session, January 29, 1992

    SciTech Connect (OSTI)

    Not Available

    1992-01-01

    This bill, also referred to as the National Energy Security Act of 1992, contains the following: Title I - Findings and purposes: Goals, least-cost energy strategy, and Director of climate protection: Title II - Definitions; Title III (none); Title IV - Fleets and alternative fuels: Alternative fuel fleets, Electric and electric-hybrid vehicle demonstration, infrastructure development, and conforming amendments, Alternative fuels, Mass transit and training; Title V - Renewable energy: CORECT and COEECT, Renewable energy initiatives, Hydropower; Title VI - Energy efficiency: Industrial, commercial, and residential, Federal energy management, Utilities, State, local, insular, and tribal energy assistance, LIHEAP options pilot program; Title VII (none); Title VIII - Advanced nuclear reactor commercialization; Title IX - Nuclear reactor licensing; Title X - Uranium: Uranium enrichment, Uranium; Title XI - Natural gas; Title XII - Outer continental shelf; Title XIII - Research, development, demonstration and commercialization activities; Title XIV - Coal, coal technology, and electricity; Title XV - Public Utility Holding Company Act reform; Title XVI - Strategic Petroleum Reserve.

  20. Basics of Polar-Format algorithm for processing Synthetic Aperture Radar images.

    SciTech Connect (OSTI)

    Doerry, Armin Walter

    2012-05-01

    The purpose of this report is to provide a background to Synthetic Aperture Radar (SAR) image formation using the Polar Format (PFA) processing algorithm. This is meant to be an aid to those tasked to implement real-time image formation using the Polar Format processing algorithm.

  1. Salt Bridge Formation, Rev 9.1.99 Warner Instrument Corporation1

    E-Print Network [OSTI]

    Movileanu, Liviu

    Salt Bridge Formation, Rev 9.1.99 Warner Instrument Corporation1 A procedure for the formation of agar salt bridges. The purpose of an agar salt bridge is to provide an electrical connection the following procedure to create salt bridges. This procedure involves: 1) formation of bridges 2) preparing

  2. General purpose programmable accelerator board

    DOE Patents [OSTI]

    Robertson, Perry J. (Albuquerque, NM); Witzke, Edward L. (Edgewood, NM)

    2001-01-01

    A general purpose accelerator board and acceleration method comprising use of: one or more programmable logic devices; a plurality of memory blocks; bus interface for communicating data between the memory blocks and devices external to the board; and dynamic programming capabilities for providing logic to the programmable logic device to be executed on data in the memory blocks.

  3. Systems Analysis Workshop Purpose

    Broader source: Energy.gov [DOE]

    Presentation on SAW purpose to the DOE Systems Analysis Workshop held in Washington, D.C. July 28-29, 2004 to discuss and define role of systems analysis in DOE Hydrogen Program.

  4. Fit for Purpose Projects

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverse (Journal Article) |Final ReporttheHouse AppropriationsFit for Purpose

  5. The NeXus data format

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Könnecke, Mark; Akeroyd, Frederick A.; Bernstein, Herbert J.; Brewster, Aaron S.; Campbell, Stuart I.; Clausen, Björn; Cottrell, Stephen; Hoffmann, Jens Uwe; Jemian, Pete R.; Männicke, David; et al

    2015-01-30

    NeXus is an effort by an international group of scientists to define a common data exchange and archival format for neutron, X-ray and muon experiments. NeXus is built on top of the scientific data format HDF5 and adds domain-specific rules for organizing data within HDF5 files, in addition to a dictionary of well defined domain-specific field names. The NeXus data format has two purposes. First, it defines a format that can serve as a container for all relevant data associated with a beamline. This is a very important use case. Second, it defines standards in the form of application definitionsmore »for the exchange of data between applications. NeXus provides structures for raw experimental data as well as for processed data.« less

  6. FUPWG Purpose, Policies, and Operations

    Broader source: Energy.gov [DOE]

    Draft report—last updated July 22, 2010—discusses the purpose, policies, and operations of the Federal Utility Partnership Working Group (FUPWG).

  7. Purpose

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass mapSpeedingProgramExemptionsProteinTotal natural gasPurchase, Delivery,Purdue, GE

  8. Purpose

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass mapSpeedingProgramExemptionsProteinTotal natural gasPurchase, Delivery,Purdue, GE

  9. S. 2166: An act to reduce the Nation's dependence on imported oil, to provide for the energy security of the Nation, and for other purposes, introduced in the United States Senate and House of Representatives, One Hundred Second Congress, Second Session, February 19, 1992

    SciTech Connect (OSTI)

    Not Available

    1992-01-01

    This bill, also referred to as the National Energy Security Act of 1992, contains the following: Title I - Findings and purposes: Climate protection goals,least-cost energy strategy, and Director of climate protection: Title II - Definitions; Title III (none); Title IV - Fleets and alternative fuels: Alternative fuel fleets, Alternative fuels, Mass transit and training; Title V - Renewable energy: CORECT and COEECT, Renewable energy initiatives, Hydropower; Title VI - Energy efficiency: Industrial, commercial, and residential, Federal energy management, Utilities, State, local, insular, and tribal energy assistance, LIHEAP options pilot program, Consultative commission on western hemisphere energy and environment; Title VII (none); Title VIII - Advanced nuclear reactor commercialization; Title IX - Nuclear reactor licensing; Title X - Uranium: Uranium enrichment, Uranium; Title XI - Natural gas; Title XII - Outer continental shelf: Coastal communities impact assistance, Coastal resources enhancement fund, relationship to other law, Prohibition of leasing and preleasing activity; Title XIII - Research, development, demonstration and commercialization activities; Title XIV - Coal and coal technology, Electricity, Innovative technology transfer; Title XV - Public Utility Holding Company Act reform; Title XVI - Strategic Petroleum Reserve; Title XVII - Stratospheric ozone depletion; Title XVIII - Indian energy resource development commission; Title XIX - General provisions.

  10. Notes on Star Formation

    E-Print Network [OSTI]

    Krumholz, Mark R

    2015-01-01

    This book provides an introduction to the field of star formation at a level suitable for graduate students or advanced undergraduates in astronomy or physics. The structure of the book is as follows. The first two chapters begin with a discussion of observational techniques, and the basic phenomenology they reveal. The goal is to familiarize students with the basic techniques that will be used throughout, and to provide a common vocabulary for the rest of the book. The next five chapters provide a similar review of the basic physical processes that are important for star formation. Again, the goal is to provide a basis for what follows. The remaining chapters discuss star formation over a variety of scales, starting with the galactic scale and working down to the scales of individual stars and their disks. The book concludes with a brief discussion of the clearing of disks and the transition to planet formation. The book includes five problem sets, complete with solutions.

  11. Treating tar sands formations with karsted zones

    DOE Patents [OSTI]

    Vinegar, Harold J. (Bellaire, TX); Karanikas, John Michael (Houston, TX)

    2010-03-09

    Methods for treating a tar sands formation are described herein. The tar sands formation may have one or more karsted zones. Methods may include providing heat from one or more heaters to one or more karsted zones of the tar sands formation to mobilize fluids in the formation. At least some of the mobilized fluids may be produced from the formation.

  12. Providence Newberg Medical Center

    High Performance Buildings Database

    Newberg, Oregon In 2002, Providence Health & Services began planning a new 188,000 square foot medical center in Newberg, Oregon to respond to the growing community's need for accessible health care. Since this was Providence's first new hospital in almost thirty years, its leaders decided to approach the project through innovative planning, design, and construction, including the achievement of lifecycle energy savings and a potential LEED certification. The hospital is comprised of 40 inpatient beds with views out to the surrounding rural landscape or into lushly planted internal courtyards.

  13. Disclaimer: The materials in this guide are provided for informational purposes only. The use of

    E-Print Network [OSTI]

    Sun, Yi

    ................................................................15 F. Part 6­Information for Criminal Records Check .................................................................3 a. Criminal Activity

  14. NREL Materials Recycling Procedure Purpose To promote environmental sustainability and stewardship, NREL provides the

    E-Print Network [OSTI]

    collection locations for recyclable materials, excluding batteries and hazardous materials, from home. This procedure identifies appropriate materials, collection locations, and rules and processes for recycling. To recycle or dispose of hazardous materials from home, contact your county or city or go to the Colorado

  15. application for The purpose of this document is to provide an overview of the Homewood Institutional

    E-Print Network [OSTI]

    Gray, Jeffrey J.

    . The training modules are online and self-paced. The training can take several hours to complete but does not need to be completed in one session. The HIRB website includes information about which training modules to consider when submitting an application for educational research. Required Training All individuals listed

  16. A major purpose of the Techni-cal information Center is to provid

    E-Print Network [OSTI]

    Oak Ridge National Laboratory

    energy usage inclu- ding the HVAC interaction. The first study involves the interaction between a heat-pump

  17. GRAPESPH: Cosmological SPH simulations with the special purpose hardware GRAPE

    E-Print Network [OSTI]

    Matthias Steinmetz

    1995-04-15

    A combined N--body/SPH code is presented which benefits from the high speed of the special purpose hardware GRAPE (GRAvity PipE). Besides gravitational forces, GRAPE also returns the list of neighbours and can, therefore, be used to speed up the hydrodynamical part, too. After the interaction list has been passed, density, pressure forces, propagation and interpolation of particles etc. are calculated on the front end, a 50 MHz SUN SPARC 10. In order to combine SPH and GRAPE, possible limitations due to the hardware design of GRAPE are carefully analyzed and modifications compared to current SPH codes are discussed. The resulting code, GRAPESPH, is similarly flexible as TREESPH. It seems especially well suited to investigate the formation of individual objects in a large scale structure environment, like eg. galaxies or clusters. The total performance is at least half as good as treesph on a CRAY and for most applications it seems to be even better. The CPU time per time step is only slightly dependent on the clustering state. GRAPESPH, therefore, provides a very attractive alternative to the use of supercomputers in cosmology.

  18. XML Format for SESAME and LEOS

    SciTech Connect (OSTI)

    Durrenberger, J K; Neely, J R; Sterne, P A

    2009-04-29

    The objective of this document is to describe the XML format used by LLNL and LANL to represent the equation-of-state and related material information in the LEOS and SESAME data libraries. The primary purpose of this document is to describe a specific XML format for representing EOS data that is tailored to the nature of the underlying data and is amenable to conversion to both legacy SESAME and LEOS binary formats. The secondary purpose is to describe an XML format that lends itself to a 'natural' representation in a binary file format of the SESAME, pdb or hdf5 form so that this format and related tools can be used for the rapid and efficient development and implementation of prototype data structures. This document describes the XML format only. A working knowledge of LEOS and SESAME formats is assumed.

  19. FIT-FOR-PURPOSE LAND ADMINISTRATION

    E-Print Network [OSTI]

    FIT-FOR-PURPOSE LAND ADMINISTRATION AND THE POST-2015 DEVELOPMENT AGENDA ANNUAL WORLD BANK the coalescence the yardstick 3 #12;Methodology fit-for-purpose land administration urban and rural; it will influence land administration design 2. Fit-for-purpose is happening; but, needs purpose, stages, and future

  20. Formate-assisted pyrolysis

    DOE Patents [OSTI]

    DeSisto, William Joseph; Wheeler, Marshall Clayton; van Heiningen, Adriaan R. P.

    2015-03-17

    The present invention provides, among other thing, methods for creating significantly deoxygenated bio-oils form biomass including the steps of providing a feedstock, associating the feedstock with an alkali formate to form a treated feedstock, dewatering the treated feedstock, heating the dewatered treated feedstock to form a vapor product, and condensing the vapor product to form a pyrolysis oil, wherein the pyrolysis oil contains less than 30% oxygen by weight.

  1. Personal Property (Informational Purposes Only)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-01-26

    This draft has been scheduled for final review before the Directives Review Board on 02/5/2015. All major comments and concerns should be provided to your DRB representative by 02/3/2015, following your organization process. If you do not know who your representative is, please see the list of DRB members. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-1014).

  2. Treating tar sands formations with dolomite

    DOE Patents [OSTI]

    Vinegar, Harold J.; Karanikas, John Michael

    2010-06-08

    Methods for treating a tar sands formation are described herein. The tar sands formation may include dolomite and hydrocarbons. Methods may include providing heat at less than the decomposition temperature of dolomite from one or more heaters to at least a portion of the formation. At least some of the hydrocarbon fluids are mobilized in the formation. At least some of the hydrocarbon fluids may be produced from the formation.

  3. Treating nahcolite containing formations and saline zones

    DOE Patents [OSTI]

    Vinegar, Harold J

    2013-06-11

    A method for treating a nahcolite containing subsurface formation includes removing water from a saline zone in or near the formation. The removed water is heated using a steam and electricity cogeneration facility. The heated water is provided to the nahcolite containing formation. A fluid is produced from the nahcolite containing formation. The fluid includes at least some dissolved nahcolite. At least some of the fluid is provided to the saline zone.

  4. Notes2Providers.doc -1-Notes to Retail Providers

    E-Print Network [OSTI]

    providers that purchase electricity from a power pool that submits an Annual Report to the Energy CommissionNotes2Providers.doc -1- Notes to Retail Providers February 2003 Power Source Disclosure an energy mix or fuel mix different than the California Mix, (Net System Power)i . As a retail provider you

  5. Isolating Triggered Star Formation

    E-Print Network [OSTI]

    Elizabeth J. Barton; Jacob A. Arnold; Andrew R. Zentner; James S. Bullock; Risa H. Wechsler

    2007-08-21

    Galaxy pairs provide a potentially powerful means of studying triggered star formation from galaxy interactions. We use a large cosmological N-body simulation coupled with a well-tested semi-analytic substructure model to demonstrate that the majority of galaxies in close pairs reside within cluster or group-size halos and therefore represent a biased population, poorly suited for direct comparison to ``field'' galaxies. Thus, the frequent observation that some types of galaxies in pairs have redder colors than ``field'' galaxies is primarily a selection effect. We select galaxy pairs that are isolated in their dark matter halos with respect to other massive subhalos (N=2 halos) and a control sample of isolated galaxies (N=1 halos) for comparison. We then apply these selection criteria to a volume-limited subset of the 2dF Galaxy Redshift Survey with M_Bj ~ 5 above their average past value, while only 10% of isolated galaxies in the control sample show this level of enhancement. Thus, 14% (20 %) of the galaxies in these close pairs show clear triggered star formation. The isolation criteria we develop provide a means to constrain star formation and feedback prescriptions in hydrodynamic simulations and a very general method of understanding the importance of triggered star formation in a cosmological context. (Abridged.)

  6. Lot Times & After Hour Parking Policy Definition & Purpose

    E-Print Network [OSTI]

    Emshwiller, Eve

    Lot Times & After Hour Parking Policy Definition & Purpose This policy establishes standard Lot times, (2) establish consistent lot times, and (3) provide balance for after hours parking needs (public Police, and will annually review placement of lots in categories. · Parking is restricted to marked

  7. Neutron Scattering Society of America Purpose and New Initiatives

    E-Print Network [OSTI]

    1 Neutron Scattering Society of America (NSSA) Purpose and New Initiatives www.neutronscattering.org SNS/ANL School on Neutron and X-Ray Scattering June 2011 Visit us now on Facebook #12;2 What and provide a focal point for the neutron scattering community in the USA To identify the needs

  8. Neutron Scattering Society of America Purpose and New Initiatives

    E-Print Network [OSTI]

    Pennycook, Steve

    1 Neutron Scattering Society of America (NSSA) Purpose and New Initiatives www.neutronscattering.org SNS/ANL School on Neutron and X-Ray Scattering June 2010 Visit us now on Facebook #12;2 What and provide a focal point for the neutron scattering community in the USA To identify the needs

  9. Creating and maintaining a gas cap in tar sands formations

    DOE Patents [OSTI]

    Vinegar, Harold J. (Bellaire, TX); Karanikas, John Michael (Houston, TX); Dinkoruk, Deniz Sumnu (Houston, TX); Wellington, Scott Lee (Bellaire, TX)

    2010-03-16

    Methods for treating a tar sands formation are disclosed herein. Methods for treating a tar sands formation may include providing heat to at least part of a hydrocarbon layer in the formation from one or more heaters located in the formation. Pressure may be allowed to increase in an upper portion of the formation to provide a gas cap in the upper portion. At least some hydrocarbons are produced from a lower portion of the formation.

  10. Satellites provide the big picture

    E-Print Network [OSTI]

    Famiglietti, JS; Cazenave, A; Eicker, A; Reager, JT; Rodell, M; Velicogna, I

    2015-01-01

    provide the necessary “big-picture” spatial coverage, asprovide the big picture gether, these measurements will

  11. UNIT TYPE MILITARY PROVIDES IIT PROVIDES (Navy/Marines)

    E-Print Network [OSTI]

    Heller, Barbara

    UNIT TYPE MILITARY PROVIDES IIT PROVIDES Naval (Navy/Marines) 4 year­Type 1 Full tuition and fees. Room and board* for all 4 years. Navy (Must be currently enlisted personnel) STA-21 Seaman to Admiral

  12. Varying heating in dawsonite zones in hydrocarbon containing formations

    DOE Patents [OSTI]

    Vinegar, Harold J. (Bellaire, TX); Xie, Xueying (Houston, TX); Miller, David Scott (Katy, TX)

    2009-07-07

    A method for treating an oil shale formation comprising dawsonite includes assessing a dawsonite composition of one or more zones in the formation. Heat from one or more heaters is provided to the formation such that different amounts of heat are provided to zones with different dawsonite compositions. The provided heat is allowed to transfer from the heaters to the formation. Fluids are produced from the formation.

  13. Purpose of journals Some popular statistical journals

    E-Print Network [OSTI]

    Reich, Brian J.

    Outline · Purpose of journals · Some popular statistical journals · How to structure a journal article · What makes a good journal article? · Editorial structure of a journal · The review process · Submitting a paper · Acting as a referee 1 #12;Purpose of journals Research: The mechanism by which knowledge

  14. Solution mining dawsonite from hydrocarbon containing formations with a chelating agent

    DOE Patents [OSTI]

    Vinegar, Harold J. (Bellaire, TX)

    2009-07-07

    A method for treating an oil shale formation comprising dawsonite includes providing heat from one or more heaters to the formation to heat the formation. Hydrocarbon fluids are produced from the formation. At least some dawsonite in the formation is decomposed with the provided heat. A chelating agent is provided to the formation to dissolve at least some dawsonite decomposition products. The dissolved dawsonite decomposition products are produced from the formation.

  15. General Purpose Microcomputers in Energy Management 

    E-Print Network [OSTI]

    Schmidt, P. S.

    1981-01-01

    The development of general purpose microcomputers has brought powerful computing capability within the price range of virtually all energy managers, regardless of the size or sophistication of their operations. This paper discusses some areas...

  16. Modelling and control of satellite formations 

    E-Print Network [OSTI]

    Vaddi, Veera Venkata Sesha Sai

    2004-09-30

    ®erent satellites in a formation. To achieve the various mission objectives it is necessary for a formation to recon¯gure itself periodically. An analytical impulsive control scheme has been developed for this purpose. This control scheme has the distinct advantage... . . . . . . . . . . . . . . . . . . 15 1.4.2 Impulsive Control . . . . . . . . . . . . . . . . . . . 16 1.5 Goals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 1.6 Nonlinearity and Eccentricity Perturbations . . . . . . . . 18 1.7 Linear and Nonlinear Controllers...

  17. Ancillary Services Provided from DER

    SciTech Connect (OSTI)

    Campbell, J.B.

    2005-12-21

    Distributed energy resources (DER) are quickly making their way to industry primarily as backup generation. They are effective at starting and then producing full-load power within a few seconds. The distribution system is aging and transmission system development has not kept up with the growth in load and generation. The nation's transmission system is stressed with heavy power flows over long distances, and many areas are experiencing problems in providing the power quality needed to satisfy customers. Thus, a new market for DER is beginning to emerge. DER can alleviate the burden on the distribution system by providing ancillary services while providing a cost adjustment for the DER owner. This report describes 10 types of ancillary services that distributed generation (DG) can provide to the distribution system. Of these 10 services the feasibility, control strategy, effectiveness, and cost benefits are all analyzed as in the context of a future utility-power market. In this market, services will be provided at a local level that will benefit the customer, the distribution utility, and the transmission company.

  18. Demand Response Providing Ancillary Services

    E-Print Network [OSTI]

    1 Demand Response Providing Ancillary Services: A Comparison of Opportunities and Challenges in US to operate (likely price takers) ­ Statistical reliability (property of large aggregations of small resources size based on Mid-Atlantic Reserve Zone #12;Market Rules: Resource Size Min. Size (MW) Aggregation

  19. Power systems utilizing the heat of produced formation fluid

    DOE Patents [OSTI]

    Lambirth, Gene Richard (Houston, TX)

    2011-01-11

    Systems, methods, and heaters for treating a subsurface formation are described herein. At least one method includes treating a hydrocarbon containing formation. The method may include providing heat to the formation; producing heated fluid from the formation; and generating electricity from at least a portion of the heated fluid using a Kalina cycle.

  20. Rapid gas hydrate formation process

    DOE Patents [OSTI]

    Brown, Thomas D.; Taylor, Charles E.; Unione, Alfred J.

    2013-01-15

    The disclosure provides a method and apparatus for forming gas hydrates from a two-phase mixture of water and a hydrate forming gas. The two-phase mixture is created in a mixing zone which may be wholly included within the body of a spray nozzle. The two-phase mixture is subsequently sprayed into a reaction zone, where the reaction zone is under pressure and temperature conditions suitable for formation of the gas hydrate. The reaction zone pressure is less than the mixing zone pressure so that expansion of the hydrate-forming gas in the mixture provides a degree of cooling by the Joule-Thompson effect and provides more intimate mixing between the water and the hydrate-forming gas. The result of the process is the formation of gas hydrates continuously and with a greatly reduced induction time. An apparatus for conduct of the method is further provided.

  1. Purpose-Built Cyclotron DAVID WOOTAN

    E-Print Network [OSTI]

    McDonald, Kirk

    -Built Cyclotron Applications December 12, 2014 RaDIATE Collaboration Meeting 3 30 MeV protons Target Cold Neutrons Fission Materials Fusion Materials Isotopes High Energy Physics #12;Purpose-built Cyclotron has and Fusion energy programs are irradiation of fusion and fast reactor structural materials, where no suitable

  2. INSTITUTE FOR CYBER SECURITY Purpose-Centric

    E-Print Network [OSTI]

    Sandhu, Ravi

    INSTITUTE FOR CYBER SECURITY 1 Purpose-Centric Secure Information Sharing Ravi Sandhu Executive Director and Endowed Professor Institute for Cyber Security (ICS) University of Texas at San Antonio September 2009 ravi.sandhu@utsa.edu www.profsandhu.com © Ravi Sandhu #12;INSTITUTE FOR CYBER SECURITY Butler

  3. Non -commercial License 1. INTENT/PURPOSE

    E-Print Network [OSTI]

    Barthe, Loïc

    Non -commercial License 1. INTENT/PURPOSE: Non-commercial license of the XXXX software (the with a copy of this license. 3. INTELLECTUAL PROPERTY LICENSED: The rights to use, copy, modify, and compile the software, subject to the restrictions described in the present document. 5. SCOPE OF THE LICENSE NON

  4. 03.204 Employment Staff Personnel. 1. Purpose. To provide a systematic method for hiring regular staff and

    E-Print Network [OSTI]

    a vacant staff position must submit a Recruitment Request Form HRM-5 through the appropriate vice president the Recruitment Request Form. No recruitment action will be taken unless an approved Recruitment Request Form HRM Department, a completed Recruitment Summary Form HRM-5, Employment History Verification Form, Official

  5. General Provisions, Page 1 The purpose of this Human Resources Manual is to

    E-Print Network [OSTI]

    General Provisions, Page 1 Purpose The purpose of this Human Resources Manual is to: 1. Provide for submission of Human Resources System data. 4. Outline the conditions, methods and schedules of employee pay State University is a land-grant institution committed to offering access in it's educational, scholarly

  6. Geology Department Graduate Certificates: These certificates are designed to provide practicing professionals an opportunity to

    E-Print Network [OSTI]

    Geology Department Graduate Certificates: These certificates are designed to provide practicing are offered: Certificate in Engineering Geology Purpose The Graduate Certificate in Engineering Geology provides practicing geologists an opportunity to upgrade their engineering geology credentials while

  7. Festival 2 – Build Your Own General Purpose Unit Selection Speech Synthesiser 

    E-Print Network [OSTI]

    Clark, Robert A J; Richmond, Korin; King, Simon

    This paper describes version 2 of the Festival speech synthesis system. Festival 2 provides a development environment for concatenative speech synthesis, and now includes a general purpose unit selection speech synthesis ...

  8. Machine augmented composite materials for damping purposes 

    E-Print Network [OSTI]

    McCutcheon, David Matthew

    2005-02-17

    modulus [2]. The magnitude of the complex stiffness is determined by computing the square root of the sum of the squares of the storage modulus and the loss modulus. 1.2. Objective The development MAC materials that exhibit good damping properties...-1 MACHINE AUGMENTED COMPOSITE MATERIALS FOR DAMPING PURPOSES A Thesis by DAVID MATTHEW MCCUTCHEON Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER...

  9. Electrical Stimulation: Purpose, Application and Results. 

    E-Print Network [OSTI]

    Stiffler, D.M.; Savell, J.W.; Smith, G.C.; Dutson, T.R.; Carpenter, Z.L.

    1982-01-01

    -1375 Electrical Stimu ?on ?. Purpose, Applica ort-'ft~Re ults . , fES 3 _\\983 . [L]fi]ELJ 00000~ Texas Agricultural Extension Service ? The Texas A&M University System ? Daniel C. Pfannstiel, Director ? College Station, Texas ES is of greatest.... Dutson and Z. L. Carpenter* History The use of electrical stimulation (ES) for increasing meat tenderness is not a new idea. Benjamin Franklin remarked in 1749 that, "Killing turkeys electrically, with the pleasant side effect that it made them uncom...

  10. FAINT RADIO SOURCES AND STAR FORMATION HISTORY

    E-Print Network [OSTI]

    Waddington, Ian

    FAINT RADIO SOURCES AND STAR FORMATION HISTORY Deborah B. Haarsma 1 , R. Bruce Partridge 1 , Ian 85287­1504 USA Abstract. Faint extragalactic radio sources provide important information about the global history of star formation. Sensitive radio observations of the Hubble Deep Field and other fields

  11. Electromagnetic formation flight dipole solution planning

    E-Print Network [OSTI]

    Schweighart, Samuel A. (Samuel Adam), 1977-

    2005-01-01

    Electromagnetic Formation Flight (EMFF) describes the concept of using electromagnets (coupled with reaction wheels) to provide all of the necessary forces and torques needed to maintain a satellite's relative position and ...

  12. Environmental standards provide competitive advantage

    SciTech Connect (OSTI)

    Chynoweth, E.; Kirshner, E.

    1993-04-28

    Quality organizations are breaking new ground with the development of international standards for environmental management. These promise to provide the platform for chemical companies wanting to establish their environmental credibility with a global audience. [open quotes]It will be similar to auditing our customers to ISO 9000[close quote], says the environmental manager for a European chemical firm. [open quote]We will only want to deal with people who have got their environmental act together. And we'll be in a better competitive positions[close quote]. The International Organization for Standardization (ISO;Geneva) has set up a taskforce to develop an environmental management standard, which is expected to be completed by the mid-1990s. Observers think the ISO standard will draw heavily on the British Standard Institute's (BSI;London) environmental management standard, BS7750, which will likely be the first system adopted in the world. Published last year, BS7750 has been extensively piloted in the UK (CW, Sept. 30, 1992, p. 62) and is now set to be revised before being offically adopted by BSI. The UK's Chemical Industries Association (CIA;London) is anxious to prevent a proliferation of standards, and its report on BS7750 pilot projects calls for an approach integrating quality, environment, and health and safety. But standard setters, including ISO, appear to be moving in the opposite direction. In the US, the American national Standards Institute (ANSI;Washington) has started work on an environmental management standard.

  13. Water Formatics Engineered formation of nanobubbles networks

    E-Print Network [OSTI]

    Jacob, Eshel Ben

    Water Formatics Engineered formation of nanobubbles networks in water and aqueous solutions We present the idea that the anomalous effects of rf-treatments of water and aqueous solution resulted from-bubble exchange interactions. These exchange interactions are mediated by the ordering of the water molecules

  14. Heating systems for heating subsurface formations

    DOE Patents [OSTI]

    Nguyen, Scott Vinh (Houston, TX); Vinegar, Harold J. (Bellaire, TX)

    2011-04-26

    Methods and systems for heating a subsurface formation are described herein. A heating system for a subsurface formation includes a sealed conduit positioned in an opening in the formation and a heat source. The sealed conduit includes a heat transfer fluid. The heat source provides heat to a portion of the sealed conduit to change phase of the heat transfer fluid from a liquid to a vapor. The vapor in the sealed conduit rises in the sealed conduit, condenses to transfer heat to the formation and returns to the conduit portion as a liquid.

  15. Treating tar sands formations with dolomite

    DOE Patents [OSTI]

    Vinegar, Harold J.; Karanikas, John Michael

    2013-10-15

    A method for treating a karsted formation containing heavy hydrocarbons and dolomite includes providing heat to at least part of one or more karsted layers in the formation from one or more heaters located in the karsted layers. A temperature in at least one of the karsted layers is allowed to reach a decomposition temperature of dolomite in the formation. The dolomite is allowed to decompose and at least some hydrocarbons are produced from at least one of the karsted layers of the formation.

  16. Formation of porous gas hydrates

    E-Print Network [OSTI]

    Salamatin, Andrey N

    2015-01-01

    Gas hydrates grown at gas-ice interfaces are examined by electron microscopy and found to have a submicron porous texture. Permeability of the intervening hydrate layers provides the connection between the two counterparts (gas and water molecules) of the clathration reaction and makes further hydrate formation possible. The study is focused on phenomenological description of principal stages and rate-limiting processes that control the kinetics of the porous gas hydrate crystal growth from ice powders. Although the detailed physical mechanisms involved in the porous hydrate formation still are not fully understood, the initial stage of hydrate film spreading over the ice surface should be distinguished from the subsequent stage which is presumably limited by the clathration reaction at the ice-hydrate interface and develops after the ice grain coating is finished. The model reveals a time dependence of the reaction degree essentially different from that when the rate-limiting step of the hydrate formation at...

  17. Cooking with All-Purpose Flour (Spanish) 

    E-Print Network [OSTI]

    Anding, Jenna

    2008-12-09

    con harina de uso general La harina de uso general (all-purpose flour) es el tipo de harina que mejor se presta para la preparaci?n de panes, bisquets, pasteles, reposter?a y galletas. Tambi?n puede utilizarla para espesar salsas de todos tipos..., incluyendo el jugo de carne (gravy). Con frecuencia la harina se empaca en paquetes de 5 libras (5 libras de harina es el equivalente de 17? tazas). Es frecuente que se le a?adan vitaminas y hierro para hacerla m?s nutritiva. Manera de medirla Para medir la...

  18. International training course on nuclear materials accountability for safeguards purposes

    SciTech Connect (OSTI)

    Not Available

    1980-12-01

    The two volumes of this report incorporate all lectures and presentations at the International Training Course on Nuclear Materials Accountability and Control for Safeguards Purposes, held May 27-June 6, 1980, at the Bishop's Lodge near Santa Fe, New Mexico. The course, authorized by the US Nuclear Non-Proliferation Act and sponsored by the US Department of Energy in cooperation with the International Atomic Energy Agency, was developed to provide practical training in the design, implementation, and operation of a National system of nuclear materials accountability and control that satisfies both National and IAEA International safeguards objectives. Volume I, covering the first week of the course, presents the background, requirements, and general features of material accounting and control in modern safeguard systems. Volume II, covering the second week of the course, provides more detailed information on measurement methods and instruments, practical experience at power reactor and research reactor facilities, and examples of operating state systems of accountability and control.

  19. Attachment 1: DOE Phased Retirement Implementation Plan Purpose...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Plan Purpose: Phased retirement is designed to assist agencies with knowledge management and continuity of operations in the short term. Although the main purpose is to...

  20. Electronic multi-purpose material level sensor

    DOE Patents [OSTI]

    McEwan, T.E.

    1997-03-11

    The present electronic multi-purpose material level sensor is based on time domain reflectometry (TDR) of very short electrical pulses. Pulses are propagated along a transmission line that is partially immersed in a liquid, powder, or other substance such as grain in a silo. The time difference of the reflections at the start of the transmission line and the air/liquid interface are used to determine levels to better than 0.01 inch. The sensor is essentially independent of circuit element and temperature variations, and can be mass produced at an extremely low price. The transmission line may be a Goubau line, microstrip, coaxial cable, twin lead, CPS or CPW, and may typically be a strip placed along the inside wall of a tank. The reflected pulses also contain information about strata within the liquid such as sludge-build-up at the bottom of an oil tank. 9 figs.

  1. Electronic multi-purpose material level sensor

    DOE Patents [OSTI]

    McEwan, Thomas E. (Livermore, CA)

    1997-01-01

    The present electronic multi-purpose material level sensor is based on time domain reflectometry (TDR) of very short electrical pulses. Pulses are propagated along a transmission line that is partially immersed in a liquid, powder, or other substance such as grain in a silo. The time difference of the reflections at the start of the transmission line and the air/liquid interface are used to determine levels to better than 0.01 inch. The sensor is essentially independent of circuit element and temperature variations, and can be mass produced at an extremely low price. The transmission line may be a Goubau line, microstrip, coaxial cable, twin lead, CPS or CPW, and may typically be a strip placed along the inside wall of a tank. The reflected pulses also contain information about strata within the liquid such as sludge-build-up at the bottom of an oil tank.

  2. Solution mining and heating by oxidation for treating hydrocarbon containing formations

    DOE Patents [OSTI]

    Vinegar, Harold J. (Bellaire, TX); Stegemeier, George Leo (Houston, TX)

    2009-06-23

    A method for treating an oil shale formation comprising nahcolite includes providing a first fluid to a portion of the formation. A second fluid is produced from the portion. The second fluid includes at least some nahcolite dissolved in the first fluid. A controlled amount of oxidant is provided to the portion of the formation. Hydrocarbon fluids are produced from the formation.

  3. Heating subsurface formations by oxidizing fuel on a fuel carrier

    DOE Patents [OSTI]

    Costello, Michael; Vinegar, Harold J.

    2012-10-02

    A method of heating a portion of a subsurface formation includes drawing fuel on a fuel carrier through an opening formed in the formation. Oxidant is supplied to the fuel at one or more locations in the opening. The fuel is combusted with the oxidant to provide heat to the formation.

  4. General-purpose event generators for LHC physics

    SciTech Connect (OSTI)

    Buckley, Andy; Butterworth, Jonathan; Gieseke, Stefan; Grellscheid, David; Hoche, Stefan; Hoeth, Hendrik; Krauss, Frank; Lonnblad, Leif; Nurse, Emily; Richardson, Peter; Schumann, Steffen; Seymour, Michael H.; Sjostrand, Torbjorn; Skands, Peter; Webber, Bryan; /Cambridge U.

    2011-03-03

    We review the physics basis, main features and use of general-purpose Monte Carlo event generators for the simulation of proton-proton collisions at the Large Hadron Collider. Topics included are: the generation of hard-scattering matrix elements for processes of interest, at both leading and next-to-leading QCD perturbative order; their matching to approximate treatments of higher orders based on the showering approximation; the parton and dipole shower formulations; parton distribution functions for event generators; non-perturbative aspects such as soft QCD collisions, the underlying event and diffractive processes; the string and cluster models for hadron formation; the treatment of hadron and tau decays; the inclusion of QED radiation and beyond-Standard-Model processes. We describe the principal features of the Ariadne, Herwig++, Pythia 8 and Sherpa generators, together with the Rivet and Professor validation and tuning tools, and discuss the physics philosophy behind the proper use of these generators and tools. This review is aimed at phenomenologists wishing to understand better how parton-level predictions are translated into hadron-level events as well as experimentalists wanting a deeper insight into the tools available for signal and background simulation at the LHC.

  5. Production from multiple zones of a tar sands formation

    DOE Patents [OSTI]

    Karanikas, John Michael; Vinegar, Harold J

    2013-02-26

    A method for treating a tar sands formation includes providing heat to at least part of a hydrocarbon layer in the formation from a plurality of heaters located in the formation. The heat is allowed to transfer from the heaters to at least a portion of the formation. Fluids are produced from the formation through at least one production well that is located in at least two zones in the formation. The first zone has an initial permeability of at least 1 darcy. The second zone has an initial of at most 0.1 darcy. The two zones are separated by a substantially impermeable barrier.

  6. In situ oxidation of subsurface formations

    DOE Patents [OSTI]

    Beer, Gary Lee (Houston, TX); Mo, Weijian (Sugar Land, TX); Li, Busheng (Houston, TX); Shen, Chonghui (Calgary, CA)

    2011-01-11

    Methods and systems for treating a hydrocarbon containing formation described herein include providing heat to a first portion of the formation from a plurality of heaters in the first portion, producing produced through one or more production wells in a second portion of the formation, reducing or turning off heat provided to the first portion after a selected time, providing an oxidizing fluid through one or more of the heater wells in the first portion, providing heat to the first portion and the second portion through oxidation of at least some hydrocarbons in the first portion, and producing fluids through at least one of the production wells in the second portion. The produced fluids may include at least some oxidized hydrocarbons produced in the first portion.

  7. Participant Support Costs Participant support is often provided for awards made primarily for organized training,

    E-Print Network [OSTI]

    Salama, Khaled

    Participant Support Costs Participant support is often provided for awards made primarily costs cannot be used for any other purpose and thus cannot be rebudgeted into other areas without sponsor approval. The purpose of these funds is to support the costs of individual participants

  8. Planet formation and migration

    E-Print Network [OSTI]

    John C B Papaloizou; Caroline Terquem

    2005-11-28

    We review the observations of extrasolar planets, ongoing developments in theories of planet formation, orbital migration, and the evolution of multiplanet systems.

  9. Protection Program Operations (for Information Purposes Only)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-05-29

    This draft has been scheduled for final review before the Directives Review Board on 6-18-15. All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members at https://www.directives.doe.gov/beta/references/directives-review-board. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-4014). All major comments and concerns should be submitted by COB 6-17-15.

  10. Administering Workforce Discipline (Informational Purposes Only)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-01-26

    This draft has been scheduled for final review before the Directives Review Board on 02/5/2015. All major comments and concerns should be provided to your DRB representative by 02/3/2015, following your organization process. If you do not know who your representative is, please see the list of DRB members. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-1014).

  11. Facility Safety (For Informational Purposes Only)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2014-12-04

    This draft has been scheduled for final review before the Directives Review Board on 12/18/14. All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-1014). All major comments and concerns should be submitted by COB 12/16/2014.

  12. Federal Sustainable Print Management (Informational Purposes Only)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2014-09-21

    This draft has been scheduled for final review before the Directives Review Board on 10-1-15. All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members at https://www.directives.doe.gov/beta/references/directives-review-board. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-4014). All major comments and concerns should be submitted by COB 9-29-15.

  13. Position Management and Classification (Informational Purposes Only)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-01-26

    This draft has been scheduled for final review before the Directives Review Board on 02/5/2015. All major comments and concerns should be provided to your DRB representative by 02/3/2015, following your organization process. If you do not know who your representative is, please see the list of DRB members. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-1014).

  14. Independent Oversight Program (Informational Purposes Only)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-07-29

    This draft has been scheduled for final review before the Directives Review Board on 8-6-15. All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members at https://www.directives.doe.gov/beta/references/directives-review-board. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-4014). All major comments and concerns should be submitted by COB 8-5-15.

  15. Insider Threat Program (For Informational Purposes)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2014-03-10

    This draft has been scheduled for final review before the Directives Review Board on 03/20/14. All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members at https://www.directives.doe.gov/beta/references/directives-review-board. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-1014). All major comments and concerns should be submitted by COB 03/18/2014.

  16. Star Formation in the Local Milky Way

    E-Print Network [OSTI]

    Lada, Charles J

    2015-01-01

    Studies of molecular clouds and young stars near the sun have provided invaluable insights into the process of star formation. Indeed, much of our physical understanding of this topic has been derived from such studies. Perhaps the two most fundamental problems confronting star formation research today are: 1) determining the origin of stellar mass and 2) deciphering the nature of the physical processes that control the star formation rate in molecular gas. As I will briefly outline here, observations and studies of local star forming regions are making particularly significant contributions toward the solution of both these important problems.

  17. Coring in deep hardrock formations

    SciTech Connect (OSTI)

    Drumheller, D.S.

    1988-08-01

    The United States Department of Energy is involved in a variety of scientific and engineering feasibility studies requiring extensive drilling in hard crystalline rock. In many cases well depths extend from 6000 to 20,000 feet in high-temperature, granitic formations. Examples of such projects are the Hot Dry Rock well system at Fenton Hill, New Mexico and the planned exploratory magma well near Mammoth Lakes, California. In addition to these programs, there is also continuing interest in supporting programs to reduce drilling costs associated with the production of geothermal energy from underground sources such as the Geysers area near San Francisco, California. The overall progression in these efforts is to drill deeper holes in higher temperature, harder formations. In conjunction with this trend is a desire to improve the capability to recover geological information. Spot coring and continuous coring are important elements in this effort. It is the purpose of this report to examine the current methods used to obtain core from deep wells and to suggest projects which will improve existing capabilities. 28 refs., 8 figs., 2 tabs.

  18. New Advanced Refrigeration Technology Provides Clean Energy,...

    Office of Environmental Management (EM)

    Refrigeration Technology Provides Clean Energy, Low Utility Bills for Supermarkets New Advanced Refrigeration Technology Provides Clean Energy, Low Utility Bills for...

  19. 24th Annual BIA Tribal Providers Conference

    Broader source: Energy.gov [DOE]

    The BIA Tribal Providers Conference is the second largest conference in Alaska, providing opportunities for tribal leaders, native corporations and rural representatives to connect with federal...

  20. Acquisition Career Management Program (Informational Purposes Only)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2014-11-21

    This draft has been scheduled for final review before the Directives Review Board on 4-2-15 (delayed from 12-4-14 session). All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members at https://www.directives.doe.gov/beta/references/directives-review-board. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-4014). All major comments and concerns should be submitted by COB 3-31-15.

  1. Economics of dual purpose production alternatives in the Mexican tropics 

    E-Print Network [OSTI]

    Ochoa-Ochoa, Rene Federico

    1997-01-01

    Technological, marketing, and financial alternatives to the dual purpose production system in Central Veracruz, Mexico were analyzed to assess their economic viability. A large dual purpose production operation was ...

  2. Partnerships with Purpose INDUSTRY-LED RESEARCH COLLABORATIONS

    E-Print Network [OSTI]

    Wapstra, Erik

    of Revolution Design Gary Davidson at the Incat shipyard in Hobart. 2 PARTNERSHIPS WITH PURPOSE 2014 #12

  3. Petrophysical evaluation of subterranean formations

    DOE Patents [OSTI]

    Klein, James D; Schoderbek, David A; Mailloux, Jason M

    2013-05-28

    Methods and systems are provided for evaluating petrophysical properties of subterranean formations and comprehensively evaluating hydrate presence through a combination of computer-implemented log modeling and analysis. Certain embodiments include the steps of running a number of logging tools in a wellbore to obtain a variety of wellbore data and logs, and evaluating and modeling the log data to ascertain various petrophysical properties. Examples of suitable logging techniques that may be used in combination with the present invention include, but are not limited to, sonic logs, electrical resistivity logs, gamma ray logs, neutron porosity logs, density logs, NRM logs, or any combination or subset thereof.

  4. Formate brines -- New fluids for drilling and completions

    SciTech Connect (OSTI)

    Ramsey, M.S.; Shipp, J.A.

    1996-01-01

    The term ``formate brines`` refers broadly to three primary compounds dissolved in water -- sodium formate (NaCOOH), potassium formate (KCOOH) and cesium formate (CsCOOH). Each is chemically classified as an alkali-metal salt of formic acid. They offer properties that in many respects are superior to their predecessors, halide brines such as zinc bromide and calcium bromide, without the undesirable side effects of those more common halide brine systems. This article introduces the technology and provides an overview of published work to date regarding formates.

  5. Safety Topic Chemical Hood General purpose: prevent exposure to toxic, irritating, or noxious chemical

    E-Print Network [OSTI]

    Cohen, Robert E.

    Safety Topic ­ Chemical Hood General purpose: prevent exposure to toxic, irritating, or noxious chemical vapors and gases. A face velocity of 100 feet per minute (fpm) provides efficient vapor capture the better. (T) (F) A chemical hood can be used for storage of volatile, flammable, or odiferous materials

  6. ONE HEALTH ILLINOIS SUMMIT The purpose of the One Health Illinois Summit was

    E-Print Network [OSTI]

    Gilbert, Matthew

    ONE HEALTH ILLINOIS SUMMIT The purpose of the One Health Illinois Summit was: o To provide an update on the health of Illinois' human, animal and ecosystem communities o To encourage communication and food producers o To consider policy options designed to improve the health of Illinois communities

  7. Word formation in Thadou

    E-Print Network [OSTI]

    Haokip, Pauthang

    2014-01-01

    As stated above, compound words of Thadou are mostlyNote that the resulting new words are always nouns. a. b. c.bad’ (negative) Haokip: Word formation in Thadou a. â-sâa ?

  8. Intellectual Property (IP) Service Providers for Acquisition...

    Energy Savers [EERE]

    Property (IP) Service Providers for Acquisition and Assistance Transactions WA05056IBMWATSONRESEARCHCENTERWaiverofDomesticand.pdf Need to Consider Intentional...

  9. Residence Coordinator Agreement Concerning University Provided Housing

    E-Print Network [OSTI]

    Howitt, Ivan

    Residence Coordinator Agreement Concerning University Provided Housing I understand-campus apartments and provides such housing. My acceptance of employment also constitutes my agreement to the following terms related to housing provided to me by the University: 1. I agree to make no substantial

  10. Sealed Battery Block Provided With A Cooling System

    DOE Patents [OSTI]

    Verhoog, Roelof (Bordeaux, FR); Barbotin, Jean-Loup (Pompignac, FR)

    1999-11-16

    The present invention relates to a sealed battery block operating at a pressure of at least 1 bar relative, the battery including a container made of a plastics material and made up of a lid and of a case subdivided into wells by at least one partition, said battery being provided with a cooling system including two cheek plates made of a plastics material and co-operating with the outside faces of respective ones of two opposite walls of said case, each cheek plate co-operating with the corresponding wall to define a compartment provided with a plurality of ribs forming baffles for fluid flow purposes, and with an inlet orifice and an outlet orifice for the fluid, said battery being characterized in that each of said ribs extends in a direction that forms an angle relative to the plane of said partition lying in the range 60.degree. to 90.degree..

  11. Policy and Procedure for Providing Suppliers with Remote Access to IT Systems and Services

    E-Print Network [OSTI]

    Judd, Martin

    Policy and Procedure for Providing Suppliers with Remote Access to IT Systems and Services Purpose time to time be necessary to allow that supplier to have remote access to that service for support or development. Suppliers will often make it a requirement of the support contract that such access is provided

  12. AnonymousCloud: A Data Ownership Privacy Provider Framework in Cloud Computing

    E-Print Network [OSTI]

    Hamlen, Kevin W.

    AnonymousCloud: A Data Ownership Privacy Provider Framework in Cloud Computing Safwan Mahmud Khan their computation results are ultimately delivered. To provide this data ownership privacy, the cloud's distributed-anonymity; authentication; cloud computing; in- formation security; privacy; Tor I. INTRODUCTION Revolutionary advances

  13. Modelling of reoxidation inclusion formation in steel sand casting

    E-Print Network [OSTI]

    Beckermann, Christoph

    Modelling of reoxidation inclusion formation in steel sand casting A. J. Melendez, K. D. Carlson pouring, as well as their final locations on the surface of steel sand castings. Inclusions originate. The inclusion model is implemented in a general-purpose casting simulation code. The model is validated

  14. Hemodynamics Before and After Bleb Formation in Cerebral Aneurysms

    E-Print Network [OSTI]

    Frangi, Alejandro

    the intraaneurysmal hemodynamic pattern changes after bleb formation. Seven intracranial aneurysms harboring well of the vessel wall may be caused by elevated WSS associated with the inflow jet. However, the final shape the first attempt at testing this hypothesis. For this purpose, patient-specific computational fluid

  15. Crystal Structures of Phosphite Dehydrogenase Provide Insights...

    Office of Scientific and Technical Information (OSTI)

    Structures of Phosphite Dehydrogenase Provide Insights into Nicotinamide Cofactor Regeneration Citation Details In-Document Search Title: Crystal Structures of Phosphite...

  16. Hydrogen Fuel Cells Providing Critical Backup Power

    Broader source: Energy.gov [DOE]

    ReliOn, Inc., specializes in hydrogen fuel-cell backups for businesses have to stay functional during power outages -- companies like your wireless provider.

  17. Method and apparatus for vibrating a substrate during material formation

    DOE Patents [OSTI]

    Bailey, Jeffrey A. (Richland, WA) [Richland, WA; Roger, Johnson N. (Richland, WA) [Richland, WA; John, Munley T. (Benton City, WA) [Benton City, WA; Walter, Park R. (Benton City, WA) [Benton City, WA

    2008-10-21

    A method and apparatus for affecting the properties of a material include vibrating the material during its formation (i.e., "surface sifting"). The method includes the steps of providing a material formation device and applying a plurality of vibrations to the material during formation, which vibrations are oscillations having dissimilar, non-harmonic frequencies and at least two different directions. The apparatus includes a plurality of vibration sources that impart vibrations to the material.

  18. Irregular spacing of heat sources for treating hydrocarbon containing formations

    SciTech Connect (OSTI)

    Miller, David Scott; Uwechue, Uzo Philip

    2012-06-12

    A method for treating a hydrocarbon containing formation includes providing heat input to a first section of the formation from one or more heat sources located in the first section. Fluids are produced from the first section through a production well located at or near the center of the first section. The heat sources are configured such that the average heat input per volume of formation in the first section increases with distance from the production well.

  19. STRATEGIC PLAN Providing Australians with environmental

    E-Print Network [OSTI]

    Greenslade, Diana

    STRATEGIC PLAN 2010-2015 Providing Australians with environmental intelligence for safety to improve. The foundation of this Strategic Plan is maintaining our commitment to meeting our current, accounts, data-sets and standards. This Strategic Plan provides a long-term direction and action agenda

  20. August 13, 2001 To Retail Providers

    E-Print Network [OSTI]

    ://www.energy.ca.gov/regulations/retail_disclosure.html#retaildisclosure>. Sample power content labels for the "no specific purchase case" (default) and the "50% specific purchase Disclosure Regulations (SB 1305, Power Source Disclosure Program) In March of this year, the Energy Providers for providing customers with a quarterly power content label and additionally, in some cases

  1. February 10, 2003 Dear Retail Provider

    E-Print Network [OSTI]

    that purchase electricity from a power pool that submits an Annual Report to the Energy Commission may provideFebruary 10, 2003 Dear Retail Provider: Subject: Power Source Disclosure and Customer Credit on the mailing lists for the Power Source Disclosure Program and the Customer Credit Program. As someone involved

  2. BSL-3 Lab Provides New Opportunities

    E-Print Network [OSTI]

    Rock, Chris

    BSL-3 Lab Provides New Opportunities :: Texas Tech Today http://today.ttu.edu/2014/01/bsl-3-lab-provides-new-opportunities-for-texas-tech to biological pathogens and toxins. Written by Sally Logue Post 10Like Texas Tech University has dedicated a new contacted Texas Tech. "Texas Tech was able to utilize existing laboratory equipment and resources in the new

  3. and Providers With our vast network,

    E-Print Network [OSTI]

    Mease, Kenneth D.

    . In addition, we offer a number of quick and easy ways to locate participating providers. You can search for a provider by visiting our website, anthem.com/ca, or you can call Customer Service at the toll-free number health care. SC9722 Rev. 2/11 Anthem Blue Cross is the trade name of Blue Cross of California

  4. Component-based General-purpose Operating System Martin Decky

    E-Print Network [OSTI]

    Component-based General-purpose Operating System Martin Deck´y Charles University, Faculty to apply this programming and design paradigm in the domain of general-purpose operating systems. This paper analyzes several nice properties of component systems which might be beneficial in operating

  5. For discussion purposes only Biofuel and Poverty Nexus

    E-Print Network [OSTI]

    For discussion purposes only Biofuel and Poverty Nexus in Asia 13th Poverty and Environment Partnership Meeting Myo Thant Manila, 11 June 2008 #12;For discussion purposes only Interest in Biofuels has and policies · Number of countries · Different biofuel feedstock · Research on second generation technology #12

  6. University of Oxford Transgender Policy Purpose of this policy

    E-Print Network [OSTI]

    Henderson, Gideon

    University of Oxford Transgender Policy Purpose of this policy 1. The purpose of this policy the process of gender reassignment. The policy and associated guidance give more detail on how the Universitys Equality Policy applies to transgender people. 2. This policy also supports members of the University

  7. Astrophysics on the GRAPE Family of Special Purpose Computers

    E-Print Network [OSTI]

    Piet Hut; Jun Makino

    1998-11-26

    The GRAPE-4, the world's fastest computer in 1995-1997, has produced some major scientific results, through a wide diversity of large-scale simulations in astrophysics. Applications have ranged from planetary formation, through the evolution of star clusters and galactic nuclei, to the formation of galaxies and clusters of galaxies.

  8. NEWS & VIEWS PATTERN FORMATION

    E-Print Network [OSTI]

    Loss, Daniel

    no apologies for investing energy into problems of specific application to a particular process in nature, and having the curiosity to want to find out how they work. The general public, and especially children flow/surface growth system in a rarely explored region of parameter space for such pattern formation

  9. Creating fluid injectivity in tar sands formations

    DOE Patents [OSTI]

    Stegemeier, George Leo; Beer, Gary Lee; Zhang, Etuan

    2010-06-08

    Methods for treating a tar sands formation are described herein. Methods for treating a tar sands may include heating a portion of a hydrocarbon layer in the formation from one or more heaters located in the portion. The heat may be controlled to increase the permeability of at least part of the portion to create an injection zone in the portion with an average permeability sufficient to allow injection of a fluid through the injection zone. A drive fluid and/or an oxidizing fluid may be provided into the injection zone. At least some hydrocarbons are produced from the portion.

  10. Creating fluid injectivity in tar sands formations

    DOE Patents [OSTI]

    Stegemeier, George Leo; Beer, Gary Lee; Zhang, Etuan

    2012-06-05

    Methods for treating a tar sands formation are described herein. Methods for treating a tar sands may include heating a portion of a hydrocarbon layer in the formation from one or more heaters located in the portion. The heat may be controlled to increase the permeability of at least part of the portion to create an injection zone in the portion with an average permeability sufficient to allow injection of a fluid through the injection zone. A drive fluid and/or an oxidizing fluid may be provided into the injection zone. At least some hydrocarbons including mobilized hydrocarbons are produced from the portion.

  11. Static Pricing for a Network Service Provider

    E-Print Network [OSTI]

    Caro, Felipe

    This article studies the static pricing problem of a network service provider who has a fixed capacity and faces different types of customers (classes). Each type of customers can have its own capacity constraint but it ...

  12. CO{sub 2} Sequestration Capacity and Associated Aspects of the Most Promising Geologic Formations in the Rocky Mountain Region: Local-Scale Analyses

    SciTech Connect (OSTI)

    Laes, Denise; Eisinger, Chris; Morgan, Craig; Rauzi, Steve; Scholle, Dana; Scott, Phyllis; Lee, Si-Yong; Zaluski, Wade; Esser, Richard; Matthews, Vince; McPherson, Brian

    2013-07-30

    The purpose of this report is to provide a summary of individual local-­?scale CCS site characterization studies conducted in Colorado, New Mexico and Utah. These site-­? specific characterization analyses were performed as part of the “Characterization of Most Promising Sequestration Formations in the Rocky Mountain Region” (RMCCS) project. The primary objective of these local-­?scale analyses is to provide a basis for regional-­?scale characterization efforts within each state. Specifically, limits on time and funding will typically inhibit CCS projects from conducting high-­? resolution characterization of a state-­?sized region, but smaller (< 10,000 km{sup 2}) site analyses are usually possible, and such can provide insight regarding limiting factors for the regional-­?scale geology. For the RMCCS project, the outcomes of these local-­?scale studies provide a starting point for future local-­?scale site characterization efforts in the Rocky Mountain region.

  13. In situ recovery from residually heated sections in a hydrocarbon containing formation

    DOE Patents [OSTI]

    Vinegar, Harold J. (Bellaire, TX); Karanikas, John Michael (Houston, TX); Ryan, Robert Charles (Houston, TX)

    2010-12-14

    Methods of treating a tar sands formation is described herein. The methods may include providing heat to a first section of a hydrocarbon layer in the formation from a plurality of heaters located in the first section of the formation. Heat is transferred from the heaters so that at least a first section of the formation reaches a selected temperature. At least a portion of residual heat from the first section transfers from the first section to a second section of the formation. At least a portion of hydrocarbons in the second section are mobilized by providing a solvation fluid and/or a pressurizing fluid to the second section of the formation.

  14. Electric-utility DSM programs: Terminology and reporting formats

    SciTech Connect (OSTI)

    Hirst, E. ); Sabo, C. )

    1991-10-01

    The number, scope, effects, and costs of electric-utility demand-site management programs are growing rapidly in the United States. Utilities, their regulators, and energy policy makers need reliable information on the costs of, participation in, and energy and load effects of these programs to make informed decisions. In particular, information is needed on the ability of these programs to cost-effectively provide energy and capacity resources that are alternatives to power plants. This handbook addresses the need for additional and better information in two ways. First, it discusses the key concepts associated with DSM-program types, participation, energy and load effects, and costs. Second, the handbook offers definitions and a sample reporting form for utility DSM programs. The primary purpose in developing these definitions and this form is to encourage consistency in the collection and reporting of data on DSM programs. To ensure that the discussions, reporting formats, and definitions will be useful and used, development of this handbook was managed by a committee, with membership from electric utilities, state regulatory commissions, and the US Department of Energy. Also, this data-collection form was pretested by seven people from six utilities, who completed the form for nine DSM programs.

  15. 2004 Notes2Providers.doc -1-Notes to Retail Providers

    E-Print Network [OSTI]

    with the meter data reported to the system operator (Retail providers that purchase electricity from a power pool2004 Notes2Providers.doc -1- Notes to Retail Providers February 2005 Power Source Disclosure than the California Mix, (Net System Power)i . As a retail provider you are probably aware that all

  16. General relativity and cosmic structure formation

    E-Print Network [OSTI]

    Adamek, Julian; Durrer, Ruth; Kunz, Martin

    2015-01-01

    Numerical simulations are a versatile tool providing insight into the complicated process of structure formation in cosmology. This process is mainly governed by gravity, which is the dominant force on large scales. To date, a century after the formulation of general relativity, numerical codes for structure formation still employ Newton's law of gravitation. This approximation relies on the two assumptions that gravitational fields are weak and that they are only sourced by non-relativistic matter. While the former appears well justified on cosmological scales, the latter imposes restrictions on the nature of the "dark" components of the Universe (dark matter and dark energy) which are, however, poorly understood. Here we present the first simulations of cosmic structure formation using equations consistently derived from general relativity. We study in detail the small relativistic effects for a standard {\\Lambda}CDM cosmology which cannot be obtained within a purely Newtonian framework. Our particle-mesh N...

  17. Optimum Reservoir Operation for Flood Control and Conservation Purposes 

    E-Print Network [OSTI]

    Wurbs, Ralph A.; Cabezas, L. Morris; Tibbets, Michael N.

    1985-01-01

    space available for storing flood waters. Conservation purposes include municipal, industrial, and agricultural water supply, hydroelectric power, recreation, and instream flow maintenance. Common practice is to operate a reservoir only for conservation...

  18. Regulation Indentifier Number Title/Subject/Purpose Rule Type

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of a specific rule, please see the Federal Register at https:www.regulations.gov. Regulation Indentifier Number TitleSubjectPurpose Rule Type Status 1991-AB82 Acquisition...

  19. TITLE: DISPOSAL OF PROTECTED HEALTH INFORMATION POLICY & PURPOSE

    E-Print Network [OSTI]

    Salzman, Daniel

    TITLE: DISPOSAL OF PROTECTED HEALTH INFORMATION POLICY & PURPOSE: To assure confidential information including patient and research information is disposed of in an appropriate manner. PROCEDURE patient and research information. 1. All staff must assure that paper containing confidential patient

  20. Evolution, biodiversity, taxonomy FTIR spectroscopy and taxonomic purpose

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Evolution, biodiversity, taxonomy FTIR spectroscopy and taxonomic purpose: Contribution. taxonomy / FTIR spectroscopy / Streptococcus / Lactobacillus Résumé -- Apport de la spectroscopie infrarouge à transformée de Fourier en taxonomie : contribution à la classification de bactéries lactiques

  1. Emptiness Formation Probability

    E-Print Network [OSTI]

    Nicholas Crawford; Stephen Ng; Shannon Starr

    2014-12-30

    We present rigorous upper and lower bounds on the emptiness formation probability for the ground state of a spin-$1/2$ Heisenberg XXZ quantum spin system. For a $d$-dimensional system we find a rate of decay of the order $\\exp(-c L^{d+1})$ where $L$ is the sidelength of the box in which we ask for the emptiness formation event to occur. In the $d=1$ case this confirms previous predictions made in the integrable systems community, though our bounds do not achieve the precision predicted by Bethe ansatz calculations. On the other hand, our bounds in the case $d \\geq 2$ are new. The main tools we use are reflection positivity and a rigorous path integral expansion which is a variation on those previously introduced by Toth, Aizenman-Nachtergaele and Ueltschi.

  2. Method for providing a compliant cantilevered micromold

    DOE Patents [OSTI]

    Morales, Alfredo M. (Livermore, CA); Domeier, Linda A. (Danville, CA); Gonzales, Marcela G. (Shoreline, WA); Keifer, Patrick N. (Livermore, CA); Garino, Terry J. (Albuquerque, NM)

    2008-12-16

    A compliant cantilevered three-dimensional micromold is provided. The compliant cantilevered micromold is suitable for use in the replication of cantilevered microparts and greatly simplifies the replication of such cantilevered parts. The compliant cantilevered micromold may be used to fabricate microparts using casting or electroforming techniques. When the compliant micromold is used to fabricate electroformed cantilevered parts, the micromold will also comprise an electrically conducting base formed by a porous metal substrate that is embedded within the compliant cantilevered micromold. Methods for fabricating the compliant cantilevered micromold as well as methods of replicating cantilevered microparts using the compliant cantilevered micromold are also provided.

  3. Solution mining systems and methods for treating hydrocarbon containing formations

    DOE Patents [OSTI]

    Vinegar, Harold J. (Bellaire, TX); de Rouffignac, Eric Pierre (Rijswijk, NL); Schoeling, Lanny Gene (Katy, TX)

    2009-07-14

    A method for treating an oil shale formation comprising nahcolite is disclosed. The method includes providing a first fluid to a portion of the formation through at least two injection wells. A second fluid is produced from the portion through at least one injection well until at least two injection wells are interconnected such that fluid can flow between the two injection wells. The second fluid includes at least some nahcolite dissolved in the first fluid. The first fluid is injected through one of the interconnected injection wells. The second fluid is produced from at least one of the interconnected injection wells. Heat is provided from one or more heaters to the formation to heat the formation. Hydrocarbon fluids are produced from the formation.

  4. Systems and methods for producing hydrocarbons from tar sands formations

    DOE Patents [OSTI]

    Li, Ruijian (Katy, TX); Karanikas, John Michael (Houston, TX)

    2009-07-21

    A system for treating a tar sands formation is disclosed. A plurality of heaters are located in the formation. The heaters include at least partially horizontal heating sections at least partially in a hydrocarbon layer of the formation. The heating sections are at least partially arranged in a pattern in the hydrocarbon layer. The heaters are configured to provide heat to the hydrocarbon layer. The provided heat creates a plurality of drainage paths for mobilized fluids. At least two of the drainage paths converge. A production well is located to collect and produce mobilized fluids from at least one of the converged drainage paths in the hydrocarbon layer.

  5. Introduction Seismic inversion techniques provide us with

    E-Print Network [OSTI]

    Taylor, Mark A J

    Introduction Seismic inversion techniques provide us with information about the wave velocity stratigraphy requires a knowledge of the physical properties, such as the bulk and shear moduli, and the microstructure of media through which the waves travel. Understanding how seismic velocities depend

  6. Providing medical care within underserved communities has

    E-Print Network [OSTI]

    Almor, Amit

    Providing medical care within underserved communities has always been my dream. The Florence campus the health of the citizens of South Carolina. The Community Florence, SC is conveniently located as a primary care physician with an emphasis on rural populations. Professional Leadership Tract Living

  7. Providing Security With Insecure Systems Andrew Odlyzko

    E-Print Network [OSTI]

    Odlyzko, Andrew M.

    not caused by cyber­in­security. Even taking the crash into account, the world economy has been doing veryProviding Security With Insecure Systems Andrew Odlyzko School of Mathematics, University: Security, Economics, Human Factors Extended Abstract A Martian who arrived on Earth today would surely con

  8. IN-HOUSE COURSE Application Service Providers

    E-Print Network [OSTI]

    Furht, Borko

    Trends Description and Objective The objective of this course is to provide an in-depth survey software applications to businesses and consumers via the Internet. In this course we introduce components that enabled the ASP model, including advances in networking technologies, Internet deliverable software

  9. VISION STATEMENT We provide expert guidance

    E-Print Network [OSTI]

    Lance, Veronica P.

    splatter. An in-line HEPA filter (C) is used to protect the vacuum system (D) Please, No Food or Drink. In-line HEPA filters provide added protec- tion for the house vacuum system and must be used whenever in the Lab! Eating, drinking, smoking, handling con- tact lenses, applying cosmetics, and stor- ing food

  10. Ground water provides drinking water, irrigation for

    E-Print Network [OSTI]

    Saldin, Dilano

    they join tributaries to the Mississippi River. · The deep ground water divide is the underground boundary Deep ground water divide Racine Kenosha Walworth Waukesha Washington Ozaukee Milwaukee LAKE MICHIGANGround water provides drinking water, irrigation for crops and water for indus- tries. It is also

  11. Summer Curriculum Development Initiatives Summer Curriculum Development Initiatives provide support for faculty to engage in significant and extraordinary curriculum

    E-Print Network [OSTI]

    Olszewski Jr., Edward A.

    Summer Curriculum Development Initiatives A. Purpose Summer Curriculum Development Initiatives provide support for faculty to engage in significant and extraordinary curriculum development on behalf of June, are awarded annually to support concentrated curriculum development projects conducted during

  12. Cogeneration systems and processes for treating hydrocarbon containing formations

    DOE Patents [OSTI]

    Vinegar, Harold J. (Bellaire, TX); Fowler, Thomas David (Houston, TX); Karanikas, John Michael (Houston, TX)

    2009-12-29

    A system for treating a hydrocarbon containing formation includes a steam and electricity cogeneration facility. At least one injection well is located in a first portion of the formation. The injection well provides steam from the steam and electricity cogeneration facility to the first portion of the formation. At least one production well is located in the first portion of the formation. The production well in the first portion produces first hydrocarbons. At least one electrical heater is located in a second portion of the formation. At least one of the electrical heaters is powered by electricity from the steam and electricity cogeneration facility. At least one production well is located in the second portion of the formation. The production well in the second portion produces second hydrocarbons. The steam and electricity cogeneration facility uses the first hydrocarbons and/or the second hydrocarbons to generate electricity.

  13. Star Formation Histories in the Local Group

    E-Print Network [OSTI]

    Thomas M. Brown

    2004-07-09

    Deep color magnitude diagrams extending to the main sequence provide the most direct measure of the detailed star formation history in a stellar population. With large investments of observing time, HST can obtain such data for populations out to 1 Mpc, but its field of view is extremely small in comparison to the size of Local Group galaxies. This limitation severely constrains our understanding of galaxy formation. For example, the largest galaxy in the Local Group, Andromeda, offers an ideal laboratory for studying the formation of large spiral galaxies, but the galaxy shows substructure on a variety of scales, presumably due to its violent merger history. Within its remaining lifetime, HST can only sample a few sight-lines through this complex galaxy. In contrast, a wide field imager could provide a map of Andromeda's halo, outer disk, and tidal streams, revealing the spatially-dependent star formation history in each structure. The same data would enable many secondary studies, such as the age variation in Andromeda's globular cluster system, gigantic samples of variable stars, and microlensing tracers of the galaxy's dark matter distribution.

  14. Petroleum Engineering 321 Formation Evaluation

    E-Print Network [OSTI]

    measurements to estimate hydrocarbon reserves and petrophysical properties of the formation such as porosity Description: Introduction to well-log interpretation for formation evaluation of hydrocarbon, net pay thickness, water/hydrocarbon saturation, permeability, and saturation-dependent capillary

  15. Controlling formation fines at their sources to maintain well productivity

    SciTech Connect (OSTI)

    Nguyen, P.D.; Weaver, J.D.; Rickman, R.D.; Dusterhoft, R.G.; Parker, M.A.

    2007-05-15

    Migration of formation fines has been shown to cause production decline in many wells. Despite the availability of new downhole tools for use in well stimulation and completion, the ability to sustain desired production levels is often plagued with fines migration problems. The solution to this problem is appropriate treatment to mitigate fines migration at its source. This paper describes the use of an ultra-thin tackifying agent (UTTA) for stabilizing fines in high-rate producing or injection wells. This UTTA is applied as part of an initial prepad in fracturing or gravel-packing operations, as a remedial treatment, or as a post-treatment following acid fracturing or matrix acidizing treatments. The primary purpose of UTTA application is to immobilize formation fines so that they will not detach, migrate with flowing fluids, plug the pore channels, and reduce the flow path permeability. Results of laboratory testing indicate that the UTTA system is applicable to most types of formation fines, including coals, sandstones, and carbonates. Once injected into the formation matrix or proppant pack, the UTTA forms a thin film on formation surfaces, encapsulating the fines. Capillary action helps pull the tackifier into the contact points, fixing the particulate in place without plugging the pore throat. The UTTA does not require a shut-in time after its application. The thin film tackifier does not harden, but remains flexible, enhancing the ability of a formation to withstand stress cycling and allowing the formation to handle high shear stress during high flow rates.

  16. K-12 Professional Learning Communities (PLCs) in a Rural School District on the High Plains of Texas: Mechanism for Teacher Support of Innovative Formative Assessment and Instruction with Technology (iFAIT) 

    E-Print Network [OSTI]

    Talkmitt, Marcia J.

    2013-05-06

    The purpose of this study was to explore the evolution of collaborative practices of PLCs as they emerge when using technology based formative assessment via iFAIT or innovative Formative Assessment with Instruction and ...

  17. Methanol Masers and Star Formation

    E-Print Network [OSTI]

    A. M. Sobolev; A. B. Ostrovskii; M. S. Kirsanova; O. V. Shelemei; M. A. Voronkov; A. V. Malyshev

    2006-01-12

    Methanol masers which are traditionally divided into two classes provide possibility to study important parts of the star forming regions: Class~II masers trace vicinities of the massive YSOs while class~I masers are likely to trace more distant parts of the outflows where newer stars can form. There are many methanol transitions which produce observed masers. This allows to use pumping analysis for estimation of the physical parameters in the maser formation regions and its environment, for the study of their evolution. Extensive surveys in different masing transitions allow to conclude on the values of the temperatures, densities, dust properties, etc. in the bulk of masing regions. Variability of the brightest masers is monitored during several years. In some cases it is probably caused by the changes of the dust temperature which follow variations in the brightness of the central YSO reflecting the character of the accretion process. A unified catalogue of the class II methanol masers consisting of more than 500 objects is compiled. Analysis of the data shows that: physical conditions within the usual maser source vary considerably; maser brightness is determined by parameters of some distinguished part of the object - maser formation region; class II methanol masers are formed not within the outflows but in the regions affected by their propagation. It is shown that the "near" solutions for the kinematic distances to the sources can be used for statistical analysis. The luminosity function of the 6.7 GHz methanol masers is constructed. It is shown that improvement of the sensitivity of surveys can increase number of detected maser sources considerably.

  18. Configurable memory system and method for providing atomic counting operations in a memory device

    DOE Patents [OSTI]

    Bellofatto, Ralph E. (Ridgefield, CT); Gara, Alan G. (Mount Kisco, NY); Giampapa, Mark E. (Irvington, NY); Ohmacht, Martin (Yorktown Heights, NY)

    2010-09-14

    A memory system and method for providing atomic memory-based counter operations to operating systems and applications that make most efficient use of counter-backing memory and virtual and physical address space, while simplifying operating system memory management, and enabling the counter-backing memory to be used for purposes other than counter-backing storage when desired. The encoding and address decoding enabled by the invention provides all this functionality through a combination of software and hardware.

  19. Lead Safety Awareness This Bulletin provides information on the safe handling of lead

    E-Print Network [OSTI]

    Lead Safety Awareness PURPOSE This Bulletin provides information on the safe handling of lead and lead compounds during use and storage. Improper handling of lead and lead compounds may impact operations at Department of Energy (DOE) facilities. BACKGROUND Lead is found in batteries, pipes, solder

  20. Does Ovarian Cancer Treatment and Survival Differ by the Specialty Providing Chemotherapy?

    E-Print Network [OSTI]

    George, Edward I.

    Does Ovarian Cancer Treatment and Survival Differ by the Specialty Providing Chemotherapy? Jeffrey, Katrina A. Armstrong, and Thomas C. Randall A B S T R A C T Purpose Chemotherapy for ovarian cancer from 1991 through 2001 from eight SEER sites, we identified 344 patients with ovarian cancer who were

  1. Providence Heights Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to:EA EIS Report Url JumpTechnology Jump to:CapabilitiesProvidence

  2. Description of the New WASC Accreditation Process The purpose of WASC's revised approach to institutional review is to provide institutions with a

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    for the accreditation review in light of issues arising from our own planning and development process. Student learning and stage of development, more aligned with institutional priorities, and more focused on educational effectiveness. This will be accomplished by allowing institutions to propose their own self-studies that focus

  3. University of Utah Healthcare "Enterprise" Financial Assistance Policy The purpose of this policy is to provide guidelines for; UNCOMPENSATED AND UNDERCOMPENSATED

    E-Print Network [OSTI]

    Capecchi, Mario R.

    /GUARANTORS Definitions FPL: Federal Poverty Level Financial Assistance: when a patient is approved for Charity based

  4. USE OF COPYRIGHTED WORKS BY FACULTY AND STAFF -PRINT The purpose of this statement is to provide guidance to faculty and staff

    E-Print Network [OSTI]

    Salzman, Daniel

    may be recast, transformed or adapted. The exercise of any of these exclusive rights without permission for reproducing, distributing or adapting the work; the exclusive rights described above simply do the copyright was not properly renewed in the 28th year of their initial copyright term, and pre-1989 works may

  5. Various mortars for anti-fouling purposes in marine environments

    SciTech Connect (OSTI)

    Kanematsu, Hideyuki; Masuda, Tomoka; Miura, Yoko; Kuroda, Daisuke; Hirai, Nobumitsu; Yokoyama, Seiji

    2014-02-20

    The antifouling properties for some mortars with steel making slags were investigated by real marine immersion tests and a unique laboratory acceleration tests with a specially devised biofilm acceleration reactors. Mortars mixed with steel making slags containing abundant iron elements tended to form biofilm and also bifouling. The two kinds of biofilm formation tests were used in this study. Real immersion in marine environments and laboratory test with a specially devised biofilm acceleration reactor. The former evaluated the biofouling characteristics more properly, while the latter did the biofilm formation characteristics more effectively.

  6. A METHOD OF PREPARING FISHES FOR MUSEUM AND EXHIBITION PURPOSES

    E-Print Network [OSTI]

    translucency. If the specimen is coated with wax the detail is lost, while the soft ness is only on the surface, the result would prove more satisfactory. It has been found that wax answers this purpose admirably of the mold until a thick coating of wax is formed, then allow it to cool. Before the wax has hardened wire

  7. ETSU Emergency Notification Systems Purpose of the Alert Warning System

    E-Print Network [OSTI]

    Karsai, Istvan

    ETSU Emergency Notification Systems Purpose of the Alert Warning System The alert warning system on the ETSU and VA Campuses. The system consists of strategically placed sirens that warn the university/voice message system acts in conjunction with other emergency information systems ETSU has in place (ETSU Gold

  8. Page 1 of 7 (page number not for citation purposes)

    E-Print Network [OSTI]

    Page 1 of 7 (page number not for citation purposes) Chemistry Central Journal Open Access operations during large-scale virtual screening jobs. We also implemented an algorithm to output docked in a number of therapeutic programs at the lead discovery stage [1]. Published: 8 September 2008 Chemistry

  9. Purpose-designed Crop Plants for Biofuels BIOENERGY PROGRAM

    E-Print Network [OSTI]

    Purpose-designed Crop Plants for Biofuels BIOENERGY PROGRAM The Texas AgriLife Research Center for the biofuels industry. This program recognizes that the ideal combination of traits required for an economically and energetically sustainable biofuels industry does not yet exist in a single plant spe- cies

  10. Risk Management Policy INTERNAL AUDIT Purpose of this document

    E-Print Network [OSTI]

    Kent, University of

    Risk Management Policy INTERNAL AUDIT SERVICE 1 Sept 2008 Purpose of this document 1. This risk management policy forms part of the University's internal control and corporate governance arrangements. 2. The policy explains the University's underlying approach to risk management, documents the roles

  11. DUST FORMATION IN MACRONOVAE

    SciTech Connect (OSTI)

    Takami, Hajime; Ioka, Kunihito [Institute of Particle and Nuclear Studies, KEK, 1-1, Oho, Tsukuba 305-0801 (Japan); Nozawa, Takaya, E-mail: takami@post.kek.jp, E-mail: kunihito.ioka@kek.jp, E-mail: takaya.nozawa@nao.ac.jp [National Astronomical Observatory of Japan, 2-21-1, Osawa, Mitaka, Tokyo 181-8588 (Japan)

    2014-07-01

    We examine dust formation in macronovae (as known as kilonovae), which are the bright ejecta of neutron star binary mergers and one of the leading sites of r-process nucleosynthesis. In light of information about the first macronova candidate associated with GRB 130603B, we find that dust grains of r-process elements have difficulty forming because of the low number density of the r-process atoms, while carbon or elements lighter than iron can condense into dust if they are abundant. Dust grains absorb emission from ejecta with an opacity even greater than that of the r-process elements, and re-emit photons at infrared wavelengths. Such dust emission can potentially account for macronovae without r-process nucleosynthesis as an alternative model. This dust scenario predicts a spectrum with fewer features than the r-process model and day-scale optical-to-ultraviolet emission.

  12. MODULE and STRAND REVIEW 1.1 The purpose of this procedure is to ensure that there is a systematic annual

    E-Print Network [OSTI]

    Daley, Monica A.

    MODULE and STRAND REVIEW 1. PURPOSE 1.1 The purpose of this procedure is to ensure that there is a systematic annual process of review for the modules and strands, which the College provides as part of its educational provision. 2. SCOPE 2.1 This procedure currently encompasses the taught modules in the FdSc, BSc

  13. Abundance ratios in hierarchical galaxy formation

    E-Print Network [OSTI]

    D. Thomas

    1999-01-18

    The chemical enrichment and stellar abundance ratios of galaxies which form in a hierarchical clustering scheme are calculated. For this purpose I adopt the star formation histories (SFH) as they are delivered by semi-analytic models in Kauffmann (1996}. It turns out that the average SFH of cluster ellipticals does not yield globally alpha-enhanced stellar populations. The star burst that occurs when the elliptical forms in the major merger plays therefore a crucial role in producing alpha-enhancement. Only under the assumption that the IMF is significantly flattened with respect to the Salpeter value during the burst, a Mg/Fe overabundant population can be obtained. In particular for the interpretation of radial gradients in metallicity and alpha-enhancement, the mixing of global and burst populations are of great importance. The model predicts bright field galaxies to be less alpha-enhanced than their counterparts in clusters.

  14. FSU-2.0151 Supplier Diversity Program (1) There is hereby created the Florida State University Supplier Diversity Program ["Program"]. Its purpose shall

    E-Print Network [OSTI]

    McQuade, D. Tyler

    FSU-2.0151 Supplier Diversity Program (1) There is hereby created the Florida State University Supplier Diversity Program ["Program"]. Its purpose shall be to provide opportunities for small, minority

  15. Controlling and assessing pressure conditions during treatment of tar sands formations

    SciTech Connect (OSTI)

    Zhang, Etuan; Beer, Gary Lee

    2015-11-10

    A method for treating a tar sands formation includes providing heat to at least part of a hydrocarbon layer in the tar sands formation from a plurality of heaters located in the formation. Heat is allowed to transfer from the heaters to at least a portion of the formation. A pressure in the portion of the formation is controlled such that the pressure remains below a fracture pressure of the formation overburden while allowing the portion of the formation to heat to a selected average temperature of at least about 280.degree. C. and at most about 300.degree. C. The pressure in the portion of the formation is reduced to a selected pressure after the portion of the formation reaches the selected average temperature.

  16. 8/25/08 8:13 AMLung provides breathing room underwater -The Boston Globe Page 1 of 1http://www.boston.com/news/science/articles/2008/08/25/lung_provides_breathing_room_underwater?mode=PF

    E-Print Network [OSTI]

    Flynn, Morris R.

    ://www.boston.com/news/science/articles/2008/08/25/lung_provides_breathing_room_underwater?mode=PF THIS STORY HAS BEEN FORMATTED FOR EASY PRINTING Lung provides breathing room underwater By Michelle Sipics, Globe Correspondent | August 25, 2008 bucket. "I accidentally caught a backswimmer while I was lunging for a water strider," recalled

  17. 1400.1 Environmental Health and Safety Policy Statement Purpose To emphasize Rensselaer's commitment to ensure a safe and

    E-Print Network [OSTI]

    Linhardt, Robert J.

    1400 - 1 March 2014 1400.1 Environmental Health and Safety Policy Statement Purpose To emphasize members of the campus community. Policy Rensselaer is committed to providing a safe and healthy working and the Environmental Protection Agency, and implements a site-specific safety and health program. All employees

  18. CRUSH TESTING OF 9977 GENERAL PURPOSE FISSILE PACKAGINGS

    SciTech Connect (OSTI)

    Smith, A.

    2010-07-28

    The 9977 General Purpose Fissile Package (GPFP) was designed in response to the adoption of the crush test requirement in the US regulations for packages for radioactive materials (10 CFR 71). This presentation on crush testing of the 9977 GPFP Reviews origins of Crush Test Requirements and implementation of crush test requirements in 10 CFR 71. SANDIA testing performed to support the rule making is reviewed. The differences in practice, on the part of the US Department of Energy from those required by the NRC for commercial purposes, are explained. The design features incorporated into the 9977 GPFP to enable it to withstand the crush test and the crush tests performed on the 9977 are described. Lessons learned from crush testing of GPFP packagings are given.

  19. Chemical Dust Treatment of Cottonseed for Planting Purposes

    E-Print Network [OSTI]

    Smith, H. P. (Harris Pearson)

    1936-01-01

    -. lHEMICAL DUST TREATMENT OF COTTONSEED FOR PLANTING PURPOSES H. P. Smith, Chief, Division of Agricultural Engineering D. L. Jones, Superintendent, Substation No. 8, Lubl~ock D. T. Killough, Agronomist, Division of Agronomy H. C. Mc... Reports 3 6 to 41, inclusive. 10. Killough, D. T., "Cottonseed Treatment Proves Profitable." Progres- sive Farmer, Vol. 4 8, No. 3, March 19 3 3. 11. Lehman, S. G., "Studies on Treatment of Cottonseed." North Caro- lina Agricultural Experiment Station...

  20. High-Performance Special-Purpose Computers in Science

    E-Print Network [OSTI]

    Toshiyuki Fukushige; Piet Hut; Jun Makino

    1998-11-26

    The next decade will be an exciting time for computational physicists. After 50 years of being forced to use standardized commercial equipment, it will finally become relatively straightforward to adapt one's computing tools to one's own needs. The breakthrough that opens this new era is the now wide-spread availability of programmable chips that allow virtually every computational scientist to design his or her own special-purpose computer.

  1. Program Evaluation: Purpose and Costs | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Financing Tool Fits theCommitteeCrystallineReserveInformation ResourcesPreparationPurpose and Costs

  2. Program Evaluation: Purpose and Principles of Peer Reviews | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Financing Tool Fits theCommitteeCrystallineReserveInformation ResourcesPreparationPurpose and

  3. Program Evaluation: Define Review Purpose and Scope | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURINGEnergy Bills andOrderNATIONALofDefine Review Purpose and Scope Program Evaluation:

  4. Numerical study of the effect of oxygenated blending compounds on soot formation in shock tubes

    SciTech Connect (OSTI)

    Boehm, H.; Braun-Unkhoff, M.

    2008-04-15

    This numerical study deals with the influence of blends on the amount of soot formed in shock tubes, which were simulated by assuming a homogeneous plug flow reactor model. For this purpose, first, the reaction model used here was validated against experimental results previously obtained in the literature. Then, the soot volume fractions of various mixtures of methyl tert-butyl ether (MTBE)-benzene, isobutene-benzene, methanol-benzene, and ethanol-benzene diluted in argon were simulated and compared to the results of benzene-argon pyrolysis at 1721 K and 5.4 MPa. For MTBE, isobutene, methanol, and ethanol, small amounts of additives to benzene-argon mixtures promoted soot formation, for the shock tube model assumed, while higher concentrations of these additives led to smaller soot volume fractions in comparison to pure benzene-argon pyrolysis. The most significant soot promotion effect was found for the additives MTBE and isobutene. The channel for MTBE decomposition producing isobutene and methanol is very effective at temperatures beyond 1200 K. Thus, both MTBE-benzene and isobutene-benzene mixtures diluted in argon showed rather similar behavior in regard to soot formation. Special emphasis was directed toward the causes for the concentration-dependent influence of the blends on the amount of soot formed. Aromatic hydrocarbons and acetylene were identified as key gas-phase species that determine the trends in the formation of soot of various mixtures. From reaction flux analysis for phenanthrene, it was deduced that the combinative routes including phenyl species play a major role in forming PAHs, especially at early reaction times. It is found that the additives play an important role in providing material to grow side chains, such as by reaction channels including phenylacetylene or benzyl, which are confirmed to form aromatic hydrocarbons and thus to influence the amount of soot formed, particularly when the concentrations of the blends are increased. (author)

  5. Heating hydrocarbon containing formations in a line drive staged process

    DOE Patents [OSTI]

    Miller, David Scott (Katy, TX)

    2009-07-21

    Method for treating a hydrocarbon containing formation are described herein. Methods may include providing heat to a first section of the formation with one or more first heaters in the first section. First hydrocarbons may be heated in the first section such that at least some of the first hydrocarbons are mobilized. At least some of the mobilized first hydrocarbons may be produced through a production well located in a second section of the formation. The second section may be located substantially adjacent to the first section. A portion of the second section may be provided some heat from the mobilized first hydrocarbons, but is not conductively heated by heat from the first heaters. Heat may be provided to the second section with one or more second heaters in the second section to further heat the second section.

  6. Regulation Indentifier Number Title/Subject/Purpose Rule Type

    Energy Savers [EERE]

    hold pending publication of corresponding FAR rule. 1991-AB99 Acquisition Regulations: Export Control -rulemaking provides guidance on export control laws, including identification...

  7. Special purpose modes in photonic band gap fibers

    DOE Patents [OSTI]

    Spencer, James; Noble, Robert; Campbell, Sara

    2013-04-02

    Photonic band gap fibers are described having one or more defects suitable for the acceleration of electrons or other charged particles. Methods and devices are described for exciting special purpose modes in the defects including laser coupling schemes as well as various fiber designs and components for facilitating excitation of desired modes. Results are also presented showing effects on modes due to modes in other defects within the fiber and due to the proximity of defects to the fiber edge. Techniques and devices are described for controlling electrons within the defect(s). Various applications for electrons or other energetic charged particles produced by such photonic band gap fibers are also described.

  8. Stain Uses Recipe p-Anisaldehyde General purpose stain,

    E-Print Network [OSTI]

    Yao, Shao Q

    Particularly good for amino acids. Dissolve 1.5 g ninhydrin in 100mL of n-butanol and add 3 mL AcOH. KMnO4,4- dinitrophenylhydrazine, 60 mL of H2SO4, and 80 mL of H2O in 200 mL 95% EtOH. Bromocresol Green Acidic (pKA the solution just turns pale blue. Phosphomolybdic Acid General purpose Dissolve 10 g PMA in 100 mL absolute

  9. General Purpose Energy Storage (Technical Report) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfate Reducing(Journal Article) |productionPatent: FreeformArticle)Gamma sourceReport)General Purpose

  10. IMPACTS OF BIOFILM FORMATION ON CELLULOSE FERMENTATION

    SciTech Connect (OSTI)

    Leschine, Susan

    2009-10-31

    This project addressed four major areas of investigation: i) characterization of formation of Cellulomonas uda biofilms on cellulose; ii) characterization of Clostridium phytofermentans biofilm development; colonization of cellulose and its regulation; iii) characterization of Thermobifida fusca biofilm development; colonization of cellulose and its regulation; and iii) description of the architecture of mature C. uda, C. phytofermentans, and T. fusca biofilms. This research is aimed at advancing understanding of biofilm formation and other complex processes involved in the degradation of the abundant cellulosic biomass, and the biology of the microbes involved. Information obtained from these studies is invaluable in the development of practical applications, such as the single-step bioconversion of cellulose-containing residues to fuels and other bioproducts. Our results have clearly shown that cellulose-decomposing microbes rapidly colonize cellulose and form complex structures typical of biofilms. Furthermore, our observations suggest that, as cells multiply on nutritive surfaces during biofilms formation, dramatic cell morphological changes occur. We speculated that morphological changes, which involve a transition from rod-shaped cells to more rounded forms, might be more apparent in a filamentous microbe. In order to test this hypothesis, we included in our research a study of biofilm formation by T. fusca, a thermophilic cellulolytic actinomycete commonly found in compost. The cellulase system of T. fusca has been extensively detailed through the work of David Wilson and colleagues at Cornell, and also, genome sequence of a T. fusca strain has been determine by the DOE Joint Genome Institute. Thus, T. fusca is an excellent subject for studies of biofilm development and its potential impacts on cellulose degradation. We also completed a study of the chitinase system of C. uda. This work provided essential background information for understanding how C. uda colonizes and degrades insoluble substrates. Major accomplishments of the project include: • Development of media containing dialysis tubing (described by the manufacturer as “regenerated cellulose”) as sole carbon and energy source and a nutritive surface for the growth of cellulolytic bacteria, and development of various microscopic methods to image biofilms on dialysis tubing. • Demonstration that cultures of C. phytofermentans, an obligate anaerobe, C. uda, a facultative aerobe, and T. fusca, a filamentous aerobe, formed microbial communities on the surface of dialysis tubing, which possessed architectural features and functional characteristics typical of biofilms. • Demonstration that biofilm formation on the nutritive surface, cellulose, involves a complex developmental processes, including colonization of dialysis tubing, formation of cell clusters attached to the nutritive surface, cell morphological changes, formation of complex structures embedded in extracellular polymeric matrices, and dispersal of biofilm communities as the nutritive surface is degraded. • Determination of surface specificity and regulatory aspects of biofilm formation by C. phytofermentans, C. uda, and T. fusca. • Demonstration that biofilm formation by T. fusca forms an integral part of the life cycle of this filamentous cellulolytic bacterium, including studies on the role of mycelial pellet formation in the T. fusca life cycle and a comparison of mycelial pellets to surface-attached T. fusca biofilms. • Characterization of T. fusca biofilm EPS, including demonstration of a functional role for EPS constituents. • Correlation of T. fusca developmental life cycle and cellulase gene expression.

  11. Globular Cluster Formation in M82

    E-Print Network [OSTI]

    S. J. Lipscy; P. Plavchan

    2003-11-12

    We present high resolution mid-infrared (mid-IR; 11.7 and 17.65 micron) maps of the central 400 pc region of the starburst galaxy M82. Seven star forming clusters are identified which together provide ~ 15% of the total mid-IR luminosity of the galaxy. Combining the mid-IR data with thermal radio measurements and near- and mid-IR line emission, we find that these young stellar clusters have inferred masses and sizes comparable to globular clusters. At least 20% of the star formation in M82 is found to occur in super-star clusters.

  12. A Multi-Purpose Scenario-based Simulator for Smart House Environments

    E-Print Network [OSTI]

    Jahromi, Zahra Forootan; Manashty, Ali Reza

    2011-01-01

    Developing smart house systems has been a great challenge for researchers and engineers in this area because of the high cost of implementation and evaluation process of these systems, while being very time consuming. Testing a designed smart house before actually building it is considered as an obstacle towards an efficient smart house project. This is because of the variety of sensors, home appliances and devices available for a real smart environment. In this paper, we present the design and implementation of a multi-purpose smart house simulation system for designing and simulating all aspects of a smart house environment. This simulator provides the ability to design the house plan and different virtual sensors and appliances in a two dimensional model of the virtual house environment. This simulator can connect to any external smart house remote controlling system, providing evaluation capabilities to their system much easier than before. It also supports detailed adding of new emerging sensors and devi...

  13. Method for maximizing shale oil recovery from an underground formation

    DOE Patents [OSTI]

    Sisemore, Clyde J. (Livermore, CA)

    1980-01-01

    A method for maximizing shale oil recovery from an underground oil shale formation which has previously been processed by in situ retorting such that there is provided in the formation a column of substantially intact oil shale intervening between adjacent spent retorts, which method includes the steps of back filling the spent retorts with an aqueous slurry of spent shale. The slurry is permitted to harden into a cement-like substance which stabilizes the spent retorts. Shale oil is then recovered from the intervening column of intact oil shale by retorting the column in situ, the stabilized spent retorts providing support for the newly developed retorts.

  14. nIFTy Cosmology: Comparison of Galaxy Formation Models

    E-Print Network [OSTI]

    Knebe, Alexander; Thomas, Peter A; Benson, Andrew; Blaizot, Jeremy; Bower, Richard; Carretero, Jorge; Castander, Francisco J; Cattaneo, Andrea; Cora, Sofia A; Croton, Darren J; Cui, Weiguang; Cunnama, Daniel; De Lucia, Gabriella; Devriendt, Julien E; Elahi, Pascal J; Font, Andreea; Fontanot, Fabio; Garcia-Bellido, Juan; Gargiulo, Ignacio D; Gonzalez-Perez, Violeta; Helly, John; Henriques, Bruno; Hirschmann, Michaela; Lee, Jaehyun; Mamon, Gary A; Monaco, Pierluigi; Onions, Julian; Padilla, Nelson D; Power, Chris; Pujol, Arnau; Skibba, Ramin A; Somerville, Rachel S; Srisawat, Chaichalit; Vega-Martinez, Cristian A; Yi, Sukyoung K

    2015-01-01

    We present a comparison of 14 galaxy formation models: 12 different semi-analytical models and 2 halo-occupation distribution models for galaxy formation based upon the same cosmological simulation and merger tree information derived from it. The participating codes have proven to be very successful in their own right but they have all been calibrated independently using various observational data sets, stellar models, and merger trees. In this paper we apply them without recalibration and this leads to a wide variety of predictions for the stellar mass function, specific star formation rates, stellar-to- halo mass ratios, and the abundance of orphan galaxies. The scatter is much larger than seen in previous comparison studies primarily because the codes have been used outside of their native environment within which they are well tested and calibrated. The purpose of the `nIFTy comparison of galaxy formation models' is to bring together as many different galaxy formation modellers as possible and to investig...

  15. Method of producing drive fluid in situ in tar sands formations

    DOE Patents [OSTI]

    Mudunuri, Ramesh Raju (Houston, TX); Jaiswal, Namit (Houston, TX); Vinegar, Harold J. (Bellaire, TX); Karanikas, John Michael (Houston, TX)

    2010-03-23

    Methods of treating a tar sands formation are described herein. Methods for treating a tar sands may include providing heat to at least part of a hydrocarbon layer in the formation from one or more heaters located in the formation. The heat may be allowed to transfer from the heaters to at least a portion of the formation such that a drive fluid is produced in situ in the formation. The drive fluid may move at least some mobilized, visbroken, and/or pyrolyzed hydrocarbons from a first portion of the formation to a second portion of the formation. At least some of the mobilized, visbroken, and/or pyrolyzed hydrocarbons may be produced from the formation.

  16. General relativity and cosmic structure formation

    E-Print Network [OSTI]

    Julian Adamek; David Daverio; Ruth Durrer; Martin Kunz

    2015-09-05

    Numerical simulations are a versatile tool providing insight into the complicated process of structure formation in cosmology. This process is mainly governed by gravity, which is the dominant force on large scales. To date, a century after the formulation of general relativity, numerical codes for structure formation still employ Newton's law of gravitation. This approximation relies on the two assumptions that gravitational fields are weak and that they are only sourced by non-relativistic matter. While the former appears well justified on cosmological scales, the latter imposes restrictions on the nature of the "dark" components of the Universe (dark matter and dark energy) which are, however, poorly understood. Here we present the first simulations of cosmic structure formation using equations consistently derived from general relativity. We study in detail the small relativistic effects for a standard {\\Lambda}CDM cosmology which cannot be obtained within a purely Newtonian framework. Our particle-mesh N-body code computes all six degrees of freedom of the metric and consistently solves the geodesic equation for particles, taking into account the relativistic potentials and the frame-dragging force. This conceptually clean approach is very general and can be applied to various settings where the Newtonian approximation fails or becomes inaccurate, ranging from simulations of models with dynamical dark energy or warm/hot dark matter to core collapse supernova explosions.

  17. Microwave lamp with multi-purpose rotary motor

    DOE Patents [OSTI]

    Ury, M.G.; Turner, B.; Wooten, R.D.

    1999-02-02

    In a microwave powered electrodeless lamp, a single rotary motor is used to (a) rotate the bulb and (b) provide rotary motion to a blower or pump means for providing cooling fluid to the magnetron and/or to a forced gas cooler for providing cooling gas to the bulb. The blower may consist of only of an impeller without the usual blower housing. The motor, bulb stem and bulb, or motor, bulb stem, bulb and blower may be formed as an integral unit so as to facilitate replacement. 8 figs.

  18. Microwave lamp with multi-purpose rotary motor

    DOE Patents [OSTI]

    Ury, Michael G. (Bethesda, MD); Turner, Brian (Myersville, MD); Wooten, Robert D. (Rockville, MD)

    1999-01-01

    In a microwave powered electrodeless lamp, a single rotary motor is used to a) rotate the bulb and b) provide rotary motion to a blower or pump means for providing cooling fluid to the magnetron and/or to a forced gas cooling for providing cooler gas to the bulb. The blower may consist of only of an impeller without the usual blower housing. The motor, bulb stem and bulb, or motor, bulb stem, bulb and blower may be formed as an integral unit so as to facilitate replacement.

  19. Casting NETs provides bait for autoantibody-mediated arthritis

    E-Print Network [OSTI]

    Lew, Brian Raymond

    2011-01-01

    OF CALIFORNIA, SAN DIEGO Casting NETs provides bait forvii ABSTRACT OF THE THESIS Casting NETs provides bait for

  20. I. GENERAL AUDIT PROGRAM A. PURPOSE AND APPLICABILITY

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the funds, provided the segment has separate internal controls. (Regulation 48 CFR 9904.403-30(4) is not binding in this instance but is a useful reference to assist with this...

  1. Use-driven concept formation

    E-Print Network [OSTI]

    Roberts, Jennifer M. (Jennifer Marie)

    2010-01-01

    When faced with a complex task, humans often identify domain-specific concepts that make the task more tractable. In this thesis, I investigate the formation of domain-specific concepts of this sort. I propose a set of ...

  2. Brown dwarf formation Gilles Chabrier

    E-Print Network [OSTI]

    Joergens, Viki

    : not observed ! Constraints on BD formation/ejection by disk instability: magnetic field No B (pure hydro accretion - Collapse of a cloud -> starts forming small N-body clusters of small (~10-3 Msol

  3. Cross Domain Mathematical Concept Formation 

    E-Print Network [OSTI]

    Steel, Graham; Colton, Simon; Bundy, Alan; Walsh, Toby

    2000-01-01

    Many interesting concepts in mathematics are essentially "cross-domain" in nature, relating objects from more than one area of mathematics, e.g. prime order groups. These concepts are often vital to the formation of a ...

  4. In situ heat treatment of a tar sands formation after drive process treatment

    DOE Patents [OSTI]

    Vinegar, Harold J. (Bellaire, TX); Stanecki, John (Blanco, TX)

    2010-09-21

    A method for treating a tar sands formation includes providing a drive fluid to a hydrocarbon containing layer of the tar sands formation to mobilize at least some hydrocarbons in the layer. At least some first hydrocarbons from the layer are produced. Heat is provided to the layer from one or more heaters located in the formation. At least some second hydrocarbons are produced from the layer of the formation. The second hydrocarbons include at least some hydrocarbons that are upgraded compared to the first hydrocarbons produced by using the drive fluid.

  5. In situ heat treatment from multiple layers of a tar sands formation

    DOE Patents [OSTI]

    Vinegar, Harold J. (Bellaire, TX)

    2010-11-30

    A method for treating a tar sands formation is disclosed. The method includes providing a drive fluid to a first hydrocarbon containing layer of the formation to mobilize at least some hydrocarbons in the first layer. At least some of the mobilized hydrocarbons are allowed to flow into a second hydrocarbon containing layer of the formation. Heat is provided to the second layer from one or more heaters located in the second layer. At least some hydrocarbons are produced from the second layer of the formation.

  6. Environment and the cosmic evolution of star formation

    E-Print Network [OSTI]

    Ravi K. Sheth; Raul Jimenez; Ben Panter; Alan Heavens

    2006-04-27

    We present a mark correlation analysis of the galaxies in the Sloan Digital Sky Survey using weights provided by MOPED. The large size of the sample permits statistically significant statements about how galaxies with different metallicities and star formation histories are spatially correlated. Massive objects formed a larger fraction of their stars at higher redshifts and over shorter timescales than did less massive objects (sometimes called down-sizing). We find that those galaxies which dominated the cosmic star formation at z~3 are predominantly in clusters today, whereas galaxies which dominate the star formation at z~0 inhabit substantially lower mass objects in less dense regions today. Hence, our results indicate that star formation and chemical enrichment occured first in the denser regions of the Universe, and moved to less dense regions at later times.

  7. On conduction, cooling flows and galaxy formation

    E-Print Network [OSTI]

    Fabian, A C; Morris, R G

    2002-01-01

    On the basis of the universal gas fraction in clusters of galaxies, we estimate that the effective thermal conductivity required to balance radiative cooling in the cores, where the gas temperature is 3-10keV, is about one tenth of the Spitzer rate. This confirms that thermal conduction can be important for the energy balance provided that it is not highly suppressed by magnetic fields in the gas. We determine the global effective conductivity in a sample of 29 clusters using published X-ray data on the inferred cooling rates and show that most lie between one and one tenth of the Spitzer rate. More work on the profiles in cooling flow clusters is required to test the conduction hypothesis further. We examine the possibility that conduction operates during galaxy formation, and show that it provides a simple explanation for the upper-mass cutoff in galaxy masses.

  8. On conduction, cooling flows and galaxy formation

    E-Print Network [OSTI]

    A. C. Fabian; L. M. Voigt; R. G. Morris

    2002-06-25

    On the basis of the universal gas fraction in clusters of galaxies, we estimate that the effective thermal conductivity required to balance radiative cooling in the cores, where the gas temperature is 3-10keV, is about one tenth of the Spitzer rate. This confirms that thermal conduction can be important for the energy balance provided that it is not highly suppressed by magnetic fields in the gas. We determine the global effective conductivity in a sample of 29 clusters using published X-ray data on the inferred cooling rates and show that most lie between one and one tenth of the Spitzer rate. More work on the profiles in cooling flow clusters is required to test the conduction hypothesis further. We examine the possibility that conduction operates during galaxy formation, and show that it provides a simple explanation for the upper-mass cutoff in galaxy masses.

  9. SW New Mexico Oil Well Formation Tops

    SciTech Connect (OSTI)

    Shari Kelley

    2015-10-21

    Rock formation top picks from oil wells from southwestern New Mexico from scout cards and other sources. There are differing formation tops interpretations for some wells, so for those wells duplicate formation top data are presented in this file.

  10. Organic Tandem Solar Cells: Design and Formation

    E-Print Network [OSTI]

    Chen, Chun-Chao

    2015-01-01

    Angeles Organic Tandem Solar Cells: Design and Formation AOrganic Tandem Solar Cells: Design and Formation by Chun-multi-junction tandem solar-cell design. Given this design,

  11. REGULATORY COOPERATION COUNCIL - WORK PLANNING FORMAT: Natural...

    Energy Savers [EERE]

    FORMAT: Natural Gas Use in Transportation REGULATORY COOPERATION COUNCIL - WORK PLANNING FORMAT: Natural Gas Use in Transportation RCC Workplan NGV.PDF More Documents &...

  12. Modeling Coupled Processes in Clay Formations for Radioactive Waste Disposal

    SciTech Connect (OSTI)

    Liu, Hui-Hai; Rutqvist, Jonny; Zheng, Liange; Sonnenthal, Eric; Houseworth, Jim; Birkholzer, Jens

    2010-08-31

    As a result of the termination of the Yucca Mountain Project, the United States Department of Energy (DOE) has started to explore various alternative avenues for the disposition of used nuclear fuel and nuclear waste. The overall scope of the investigation includes temporary storage, transportation issues, permanent disposal, various nuclear fuel types, processing alternatives, and resulting waste streams. Although geologic disposal is not the only alternative, it is still the leading candidate for permanent disposal. The realm of geologic disposal also offers a range of geologic environments that may be considered, among those clay shale formations. Figure 1-1 presents the distribution of clay/shale formations within the USA. Clay rock/shale has been considered as potential host rock for geological disposal of high-level nuclear waste throughout the world, because of its low permeability, low diffusion coefficient, high retention capacity for radionuclides, and capability to self-seal fractures induced by tunnel excavation. For example, Callovo-Oxfordian argillites at the Bure site, France (Fouche et al., 2004), Toarcian argillites at the Tournemire site, France (Patriarche et al., 2004), Opalinus clay at the Mont Terri site, Switzerland (Meier et al., 2000), and Boom clay at Mol site, Belgium (Barnichon et al., 2005) have all been under intensive scientific investigations (at both field and laboratory scales) for understanding a variety of rock properties and their relations with flow and transport processes associated with geological disposal of nuclear waste. Clay/shale formations may be generally classified as indurated and plastic clays (Tsang et al., 2005). The latter (including Boom clay) is a softer material without high cohesion; its deformation is dominantly plastic. For both clay rocks, coupled thermal, hydrological, mechanical and chemical (THMC) processes are expected to have a significant impact on the long-term safety of a clay repository. For example, the excavation-damaged zone (EDZ) near repository tunnels can modify local permeability (resulting from induced fractures), potentially leading to less confinement capability (Tsang et al., 2005). Because of clay's swelling and shrinkage behavior (depending on whether the clay is in imbibition or drainage processes), fracture properties in the EDZ are quite dynamic and evolve over time as hydromechanical conditions change. To understand and model the coupled processes and their impact on repository performance is critical for the defensible performance assessment of a clay repository. Within the Natural Barrier System (NBS) group of the Used Fuel Disposition (UFD) Campaign at DOE's Office of Nuclear Energy, LBNL's research activities have focused on understanding and modeling such coupled processes. LBNL provided a report in this April on literature survey of studies on coupled processes in clay repositories and identification of technical issues and knowledge gaps (Tsang et al., 2010). This report will document other LBNL research activities within the natural system work package, including the development of constitutive relationships for elastic deformation of clay rock (Section 2), a THM modeling study (Section 3) and a THC modeling study (Section 4). The purpose of the THM and THC modeling studies is to demonstrate the current modeling capabilities in dealing with coupled processes in a potential clay repository. In Section 5, we discuss potential future R&D work based on the identified knowledge gaps. The linkage between these activities and related FEPs is presented in Section 6.

  13. Well completion process for formations with unconsolidated sands

    DOE Patents [OSTI]

    Davies, David K. (Kingwood, TX); Mondragon, III, Julius J. (Redondo Beach, CA); Hara, Philip Scott (Monterey Park, CA)

    2003-04-29

    A method for consolidating sand around a well, involving injecting hot water or steam through well casing perforations in to create a cement-like area around the perforation of sufficient rigidity to prevent sand from flowing into and obstructing the well. The cement area has several wormholes that provide fluid passageways between the well and the formation, while still inhibiting sand inflow.

  14. Perceptions of livestock producers, forage producers, wildlife managers, and forage-based service providers concerning extension and technology-transfer activities in south Texas and northeast Mexico 

    E-Print Network [OSTI]

    Folsom, Wendy Ann

    2001-01-01

    The purpose of this bi-national study was to determine the type, nature, and extent of existing extension and technology-transfer activities provided to livestock producers, forage producers, and wildlife managers in south ...

  15. Exploitation and Optimization of Reservoir Performance in Hunton Formation, Oklahoma

    SciTech Connect (OSTI)

    Mohan Kelkar

    2007-06-30

    Hunton formation in Oklahoma has been the subject of attention for the last ten years. The new interest started with the drilling of the West Carney field in 1995 in Lincoln County. Subsequently, many other operators have expanded the search for oil and gas in Hunton formation in other parts of Oklahoma. These fields exhibit many unique production characteristics, including: (1) decreasing water-oil or water-gas ratio over time; (2) decreasing gas-oil ratio followed by an increase; (3) poor prediction capability of the reserves based on the log data; and (4) low geological connectivity but high hydrodynamic connectivity. The purpose of this investigation is to understand the principal mechanisms affecting the production, and propose methods by which we can optimize the production from fields with similar characteristics.

  16. Varying properties of in situ heat treatment of a tar sands formation based on assessed viscosities

    DOE Patents [OSTI]

    Karanikas, John Michael; Vinegar, Harold J

    2014-03-04

    A method for treating a tar sands formation includes providing heat to at least part of a hydrocarbon layer in the formation from a plurality of heaters located in the formation. The heat is allowed to transfer from the heaters to at least a portion of the formation. A viscosity of one or more zones of the hydrocarbon layer is assessed. The heating rates in the zones are varied based on the assessed viscosities. The heating rate in a first zone of the formation is greater than the heating rate in a second zone of the formation if the viscosity in the first zone is greater than the viscosity in the second zone. Fluids are produced from the formation through the production wells.

  17. Recovery and regeneration of spent MHD seed material by the formate process

    DOE Patents [OSTI]

    Sheth, Atul C. (Tullahoma, TN); Holt, Jeffrey K. (Manchester, TN); Rasnake, Darryll G. (Manchester, TN); Solomon, Robert L. (Seattle, WA); Wilson, Gregory L. (Redmond, WA); Herrigel, Howard R. (Seattle, WA)

    1991-01-01

    The specification discloses a spent seed recovery and regeneration process for an MHM power plant employing an alkali metal salt seed material such as potassium salt wherein the spent potassium seed in the form of potassium sulfate is collected from the flue gas and reacted with calcium hydroxide and carbon monoxide in an aqueous solution to cause the formation of calcium sulfate and potassium formate. The pH of the solution is adjusted to supress formation of formic acid and to promote precipitation of any dissolved calcium salts. The solution containing potassium formate is then employed to provide the potassium salt in the form of potassium formate or, optionally, by heating the potassium formate under oxidizing conditions to convert the potassium formate to potassium carbonate.

  18. Recovery and regeneration of spent MHD seed material by the formate process

    DOE Patents [OSTI]

    Sheth, A.C.; Holt, J.K.; Rasnake, D.G.; Solomon, R.L.; Wilson, G.L.; Herrigel, H.R.

    1991-10-15

    The specification discloses a spent seed recovery and regeneration process for an MHD power plant employing an alkali metal salt seed material such as potassium salt wherein the spent potassium seed in the form of potassium sulfate is collected from the flue gas and reacted with calcium hydroxide and carbon monoxide in an aqueous solution to cause the formation of calcium sulfate and potassium formate. The pH of the solution is adjusted to suppress formation of formic acid and to promote precipitation of any dissolved calcium salts. The solution containing potassium formate is then employed to provide the potassium salt in the form of potassium formate or, optionally, by heating the potassium formate under oxidizing conditions to convert the potassium formate to potassium carbonate. 5 figures.

  19. State Roles in Providing Affordable Mass Transport Services for...

    Open Energy Info (EERE)

    State Roles in Providing Affordable Mass Transport Services for Low-Income Residents Jump to: navigation, search Tool Summary LAUNCH TOOL Name: State Roles in Providing Affordable...

  20. Tapping Landfill Gas to Provide Significant Energy Savings and...

    Office of Environmental Management (EM)

    Tapping Landfill Gas to Provide Significant Energy Savings and Greenhouse Gas Reductions - Case Study, 2013 Tapping Landfill Gas to Provide Significant Energy Savings and...

  1. Retrofit Diesel Emissions Control System Providing 50% NOxControl...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Diesel Emissions Control System Providing 50% NOxControl Retrofit Diesel Emissions Control System Providing 50% NOxControl 2005 Diesel Engine Emissions Reduction (DEER) Conference...

  2. Competition Provides Students with Real-World Engineering Experience...

    Energy Savers [EERE]

    Competition Provides Students with Real-World Engineering Experience Competition Provides Students with Real-World Engineering Experience April 10, 2013 - 12:00am Addthis Fifteen...

  3. ORNL thermomagnetic processing method provides path to new materials...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    thermomagnetic processing method provides path to new materials The high magnetic field environments are provided by fully recondensing commercial prototype superconducting magnet...

  4. Department of Energy to Provide Supercomputing Time to Run NOAA...

    Energy Savers [EERE]

    Department of Energy to Provide Supercomputing Time to Run NOAA's Climate Change Models Department of Energy to Provide Supercomputing Time to Run NOAA's Climate Change Models...

  5. Merit Review: EPAct State and Alternative Fuel Provider Fleets...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Merit Review: EPAct State and Alternative Fuel Provider Fleets 2012 Merit Review: EPAct State and Alternative Fuel Provider Fleets Vehicle...

  6. 2012 Merit Review: EPAct State and Alternative Fuel Provider...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Merit Review: EPAct State and Alternative Fuel Provider Fleets 2012 Merit Review: EPAct State and Alternative Fuel Provider Fleets 2012 DOE Hydrogen and Fuel Cells Program and...

  7. Tribal Leaders Provide White House with Input on Bolstering Climate...

    Energy Savers [EERE]

    Tribal Leaders Provide White House with Input on Bolstering Climate Resilience Tribal Leaders Provide White House with Input on Bolstering Climate Resilience January 7, 2015 -...

  8. Energy Department Announces Funding to Provide Better Visibility...

    Office of Environmental Management (EM)

    Provide Better Visibility into the Health of the Nation's Electric Grid Energy Department Announces Funding to Provide Better Visibility into the Health of the Nation's Electric...

  9. DOE Providing Additional Supercomputing Resources to Study Hurricane...

    Energy Savers [EERE]

    Providing Additional Supercomputing Resources to Study Hurricane Effects on Gulf Coast DOE Providing Additional Supercomputing Resources to Study Hurricane Effects on Gulf Coast...

  10. A general purpose I{sub DDQ} measurement circuit

    SciTech Connect (OSTI)

    Wallquist, K.M.; Hawkins, C.F. [Univ. of New Mexico, Albuquerque, NM (United States). Electrical & Computer Engineering Dept.; Righter, A.W. [Sandia National Labs., Albuquerque, NM (United States)

    1993-11-01

    A relatively high-speed I{sub DDQ} measurement circuit called QuiC-Mon is described. Depending upon IC settling times, upper measurement rates range from 50 kHz to 250 kHz at 100 nA resolution. It provides an inexpensive solution for fast, sensitive I{sub DDQ} measurements in CMOS IC wafer probe or packaged part production testing.

  11. Simrank: Rapid and sensitive general-purpose k-mer search tool

    SciTech Connect (OSTI)

    DeSantis, T.Z.; Keller, K.; Karaoz, U.; Alekseyenko, A.V; Singh, N.N.S.; Brodie, E.L; Pei, Z.; Andersen, G.L; Larsen, N.

    2011-04-01

    Terabyte-scale collections of string-encoded data are expected from consortia efforts such as the Human Microbiome Project (http://nihroadmap.nih.gov/hmp). Intra- and inter-project data similarity searches are enabled by rapid k-mer matching strategies. Software applications for sequence database partitioning, guide tree estimation, molecular classification and alignment acceleration have benefited from embedded k-mer searches as sub-routines. However, a rapid, general-purpose, open-source, flexible, stand-alone k-mer tool has not been available. Here we present a stand-alone utility, Simrank, which allows users to rapidly identify database strings the most similar to query strings. Performance testing of Simrank and related tools against DNA, RNA, protein and human-languages found Simrank 10X to 928X faster depending on the dataset. Simrank provides molecular ecologists with a high-throughput, open source choice for comparing large sequence sets to find similarity.

  12. FED, the Font "EDitor" and Font Formats

    E-Print Network [OSTI]

    Cohen, Joseph D.

    This memo describes FED, a program used for compiling and inspecting fonts: AST font format, a text format which can be used to create and edit fonts: and KST font format, the binary format used by SCRIMP, TJ6, and PUB.

  13. Bloodborne Pathogen Facts The University of New Orleans is committed to providing a safe and healthful work environment

    E-Print Network [OSTI]

    Li, X. Rong

    Pathogen: Microorganisms present in human blood that cause disease in humans. These includeBloodborne Pathogen Facts The University of New Orleans is committed to providing a safe) has been developed in accordance with the OSHA Bloodborne Pathogens Standard. The purpose of this ECP

  14. Method of fracturing a geological formation

    DOE Patents [OSTI]

    Johnson, James O. (2679-B Walnut, Los Alamos, NM 87544)

    1990-01-01

    An improved method of fracturing a geological formation surrounding a well bore is disclosed. A relatively small explosive charge is emplaced in a well bore and the bore is subsequently hydraulically pressurized to a pressure less than the formation breakdown pressure and preferably greater than the fracture propagation pressure of the formation. The charge is denoted while the bore is so pressurized, resulting in the formation of multiple fractures in the surrounding formation with little or no accompanying formation damage. Subsequent hydraulic pressurization can be used to propagate and extend the fractures in a conventional manner. The method is useful for stimulating production of oil, gas and possibly water from suitable geologic formations.

  15. Formation mechanism of fivefold deformation twins in nanocrystalline face-centered-cubic metals

    E-Print Network [OSTI]

    Zhu, Yuntian T.

    Formation mechanism of fivefold deformation twins in nanocrystalline face-centered-cubic metals Y Ellis Avenue, Chicago, Illinois 60637 R. Z. Valiev Ufa State Aviation Technical University, K. Marksa 12 on their formation mechanism and conditions. Here we propose a sequential twinning mechanism that provides a clear

  16. Poly(4-(aminomethyl)styrene)-b-polystyrene: Synthesis and Unilamellar Vesicle Formation

    E-Print Network [OSTI]

    Zasadzinski, Joseph A.

    Notes Poly(4-(aminomethyl)styrene)-b-polystyrene: Synthesis and Unilamellar Vesicle Formation formation from new block copolymers of the composition poly(4-(aminomethyl)- styrene)-b-polystyrene [P4AMSn of the associated styrene and is essentially "amphiphilic". In addition, the amine groups provide the option

  17. The Epoch of Galaxy Formation

    E-Print Network [OSTI]

    Raul Jimenez

    2001-10-09

    I present a biased review of when the epoch of formation of galaxies (both disks and ellipticals) maybe took place. I base my arguments in simple (mostly) analytic models that have been recently developed to reproduce most of the observed photometric, chemical and dynamical properties of galaxies both at low and high redshift.

  18. Earth and Terrestrial Planet Formation

    E-Print Network [OSTI]

    Jacobson, Seth A

    2015-01-01

    The growth and composition of Earth is a direct consequence of planet formation throughout the Solar System. We discuss the known history of the Solar System, the proposed stages of growth and how the early stages of planet formation may be dominated by pebble growth processes. Pebbles are small bodies whose strong interactions with the nebula gas lead to remarkable new accretion mechanisms for the formation of planetesimals and the growth of planetary embryos. Many of the popular models for the later stages of planet formation are presented. The classical models with the giant planets on fixed orbits are not consistent with the known history of the Solar System, fail to create a high Earth/Mars mass ratio, and, in many cases, are also internally inconsistent. The successful Grand Tack model creates a small Mars, a wet Earth, a realistic asteroid belt and the mass-orbit structure of the terrestrial planets. In the Grand Tack scenario, growth curves for Earth most closely match a Weibull model. The feeding zon...

  19. Cloud Formation, Evolution and Destruction

    E-Print Network [OSTI]

    Estalella, Robert

    Chapter 4 Cloud Formation, Evolution and Destruction We now begin to trace the journey towards a star. How long does this take? The answer is surprisingly short: a good many clouds already contain new stars and these stars tend to be young. The typical cloud cannot spend long, if any time at all

  20. Nuclear Explosive and Weapon Surety Program (Informational Purposes Only)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2014-11-21

    This draft has been scheduled for final review before the Directives Review Board on 12-4-2014. All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members at https://www.directives.doe.gov/beta/references/directives-review-board. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-4014). All major comments and concerns should be submitted by COB 12-2-2014.

  1. Implementation Guide for Developing Technical Safety Requirements (Informational Purposes Only)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-02-10

    This draft has been scheduled for final review before the Directives Review Board on 2/19/2015. All major comments and concerns should be provided to your DRB representative by 2/17/2015, following your organization process. If you do not know who your representative is, please see the list of DRB members. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-1014).

  2. Employee Performance and Recognition Program (Informational Purposes Only)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-07-29

    This draft has been scheduled for final review before the Directives Review Board on 8-6-15. All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members at https://www.directives.doe.gov/beta/references/directives-review-board. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-4014). All major comments and concerns should be submitted by COB 8-5-15.

  3. Laboratory Directed Research and Development (Informational Purposes Only)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-07-29

    This draft has been scheduled for final review before the Directives Review Board on 8-6-15. All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members at https://www.directives.doe.gov/beta/references/directives-review-board. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-4014). All major comments and concerns should be submitted by COB 8-5-15.

  4. Hazardous Materials Packaging and Transportation Safety (For Informational Purposes Only)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-10-23

    This draft has been scheduled for final review before the Directives Review Board on 11-4-15. All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members at https://www.directives.doe.gov/beta/references/directives-review-board. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-4014). All major comments and concerns should be submitted by COB 11-2-15.

  5. Magnetic Fields in Population III Star Formation

    SciTech Connect (OSTI)

    Turk, Matthew J.; Oishi, Jeffrey S.; Abel, Tom; Bryan, Greg

    2012-02-22

    We study the buildup of magnetic fields during the formation of Population III star-forming regions, by conducting cosmological simulations from realistic initial conditions and varying the Jeans resolution. To investigate this in detail, we start simulations from identical initial conditions, mandating 16, 32 and 64 zones per Jeans length, and studied the variation in their magnetic field amplification. We find that, while compression results in some amplification, turbulent velocity fluctuations driven by the collapse can further amplify an initially weak seed field via dynamo action, provided there is sufficient numerical resolution to capture vortical motions (we find this requirement to be 64 zones per Jeans length, slightly larger than, but consistent with previous work run with more idealized collapse scenarios). We explore saturation of amplification of the magnetic field, which could potentially become dynamically important in subsequent, fully-resolved calculations. We have also identified a relatively surprising phenomena that is purely hydrodynamic: the higher-resolved simulations possess substantially different characteristics, including higher infall-velocity, increased temperatures inside 1000 AU, and decreased molecular hydrogen content in the innermost region. Furthermore, we find that disk formation is suppressed in higher-resolution calculations, at least at the times that we can follow the calculation. We discuss the effect this may have on the buildup of disks over the accretion history of the first clump to form as well as the potential for gravitational instabilities to develop and induce fragmentation.

  6. J. Phys. B: Atom. Molec. Phys., Vol. 6, January 1973. Printed in Great Britain. 0 1973 Formation of HCO+ by the associative ionization of CH+0

    E-Print Network [OSTI]

    Berry, R. Stephen

    J. Phys. B: Atom. Molec. Phys., Vol. 6, January 1973. Printed in Great Britain. 0 1973 Formation of Chemistry and The James Franck Institute, The University of Chicago, Chicago, Illinois 60637, USA MS and shocks and may play a role in the formation of polyatomic species in interstellar space. Our purpose here

  7. New concept for a general purpose subsea installation system

    SciTech Connect (OSTI)

    Citi, G.; Cowen, S.; Radicioni, A.

    1996-12-31

    The first use of the Agip SAF System (Sistema Alti Fondali), an installation and maintenance system for subsea production systems up to 1,000 m water depth, was successfully performed on the Luna 40 well in 180 m w.d. The system successfully installed the christmas tree, flowline jumpers, control system and high pressure cap as well as deploying the LMRP to allow the commissioning of the well. The SAF system performed all the planned tasks during the installation of the Luna 40 subsea tree and now has to be considered an operational success. The system is based around a Master Vehicle that provides hydraulic power to, and controls a set of dedicated work modules. During the 2 test and 5 working dives, the Master Vehicle and the modules were subsea for a considerable period of time, up to 75 hours continuously, without any operational failures. This installation uncovered some system deficiencies that will have to be studied to improve the reliability and operability of the system. From the experience gained during this operation it has been shown that the system of a Master Vehicle providing locally generated hydraulic power is a feasible approach to many subsea installation problems. This paper describes the SAF system including improvements to be performed before being used operationally in up to 1,000 m of water and over. It also covers the necessary modifications required to allow the system to be deployed from a wide range of installation vessel.

  8. Formation and early evolution of the atmosphere BERNARD MARTY 1'2 & NICOLAS DAUPHAS 1

    E-Print Network [OSTI]

    . The protosolar nebula supplied a significant fraction of helium and neon, which were presumably trapped during to provide water, carbon and nitrogen is consistent with that required for the formation of the lunar craters

  9. Identification and characterization of Hydraulic Flow Units in the San Juan Formation, Orocual Field, Venezuela 

    E-Print Network [OSTI]

    Deghirmandjian, Odilia

    2001-01-01

    This thesis focuses on the integration of core and well log data in order to provide a petrophysical characterization of the Hydraulic Flow Units (HFU) in the San Juan Formation, Orocual Field, Venezuela. We used three separate approaches...

  10. Forward Modeling of the Induction Log Response of a Fractured Geologic Formation 

    E-Print Network [OSTI]

    Bray, Steven Hunter

    2013-05-02

    is a very powerful tool that provides valuable information to industry and researchers. Any way to further develop this proven method is beneficial. Whether it is characterizing hydro-fracking jobs or evaluating formations in exploration...

  11. Methods for synthesizing alane without the formation of adducts and free of halides

    DOE Patents [OSTI]

    Zidan, Ragaiy; Knight, Douglas A; Dinh, Long V

    2013-02-19

    A process is provided to synthesize an alane without the formation of alane adducts as a precursor. The resulting product is a crystallized .alpha.-alane and is a highly stable product and is free of halides.

  12. Korean Astronomical Society Provided by KAO Korean Astronomical Data Center Korean Astronomical Society Provided by KAO Korean Astronomical Data Center

    E-Print Network [OSTI]

    Shin, Junho

    Korean Astronomical Society Provided by KAO Korean Astronomical Data Center #12;Korean Astronomical Society Provided by KAO Korean Astronomical Data Center #12;Korean Astronomical Society Provided by KAO Korean Astronomical Data Center #12;Korean Astronomical Society Provided by KAO Korean Astronomical Data

  13. Modeling Reallocation of Reservoir Storage Capacity Between Flood Control and Conservation Purposes 

    E-Print Network [OSTI]

    Kim, Tae Jin

    2010-07-14

    Interest in converting portions of the large volumes of flood control storage capacity in federal multiple-purpose reservoirs in Texas and elsewhere to water supply and other conservation purposes has been growing for some time. Evaluation...

  14. SUBJECT: Laser Safety Program Purpose: The purpose of this Laser Safety Manual is to insure the safe use of lasers in

    E-Print Network [OSTI]

    SUBJECT: Laser Safety Program Purpose: The purpose of this Laser Safety Manual is to insure the safe use of lasers in research activities at the Colorado School of Mines (Mines or the School). This Laser Safety Manual outlines laser registration requirements, identifies hazards associated with using

  15. System-Level Logistics for Dual Purpose Canister Disposal

    SciTech Connect (OSTI)

    Kalinina, Elena A.

    2014-06-03

    The analysis presented in this report investigated how the direct disposal of dual purpose canisters (DPCs) may be affected by the use of standard transportation aging and disposal canisters (STADs), early or late start of the repository, and the repository emplacement thermal power limits. The impacts were evaluated with regard to the availability of the DPCs for emplacement, achievable repository acceptance rates, additional storage required at an interim storage facility (ISF) and additional emplacement time compared to the corresponding repackaging scenarios, and fuel age at emplacement. The result of this analysis demonstrated that the biggest difference in the availability of UNF for emplacement between the DPC-only loading scenario and the DPCs and STADs loading scenario is for a repository start date of 2036 with a 6 kW thermal power limit. The differences are also seen in the availability of UNF for emplacement between the DPC-only loading scenario and the DPCs and STADs loading scenario for the alternative with a 6 kW thermal limit and a 2048 start date, and for the alternatives with a 10 kW thermal limit and 2036 and 2048 start dates. The alternatives with disposal of UNF in both DPCs and STADs did not require additional storage, regardless of the repository acceptance rate, as compared to the reference repackaging case. In comparison to the reference repackaging case, alternatives with the 18 kW emplacement thermal limit required little to no additional emplacement time, regardless of the repository start time, the fuel loading scenario, or the repository acceptance rate. Alternatives with the 10 kW emplacement thermal limit and the DPCs and STADs fuel loading scenario required some additional emplacement time. The most significant decrease in additional emplacement time occurred in the alternative with the 6 kW thermal limit and the 2036 repository starting date. The average fuel age at emplacement ranges from 46 to 88 years. The maximum fuel age at emplacement ranges from 81 to 146 years. The difference in the average and maximum age of fuel at emplacement between the DPC-only and the DPCs and STADs fuel loading scenarios becomes less significant as the repository thermal limit increases and as the repository start date increases. In general, the role of STADs is to store young (30 year or younger) high burnup (45 GWD/MTU or higher) fuel. Recommendations for future study include detailed evaluation of the feasible alternatives with regard to the costs and factors not considered in this analysis, such as worker dose, dose to members of the public, and economic benefits to host entities. It is also recommended to conduct an additional analysis to evaluate the assumption regarding the transportability and disposability of DPCs for the next iteration of the direct disposal of DPCs study.

  16. Microchannel formation in seaice as habitat for microalgae

    E-Print Network [OSTI]

    K. Morawetz; S. Thoms; B. Kutschan

    2014-07-08

    The formation of saline brine channels in seaice is described by two coupled order parameters, the tetrahedricity as structure of ice and the salinity. Their evolution equations follow from a Ginzburg-Landau-functional in the form of a phase-field theory conserving salinity. The stability analysis provides the phase diagram in terms of two parameters, one describing the velocity of the freezing process and the other one characterizing the velocity of structure formation. In thermodynamics these parameters determine the supercooling or superheating region and the specific heat respectively. In contrast to the Turing model the diffusivity does not enter this phase diagram but determines only the structure size. The numerical solution shows a microstructure formation of brine inclusions in agreement with the measured samples dependent on the salinity and temperature.

  17. General-Purpose Heat Source Safety Verification Test program: Edge-on flyer plate tests

    SciTech Connect (OSTI)

    George, T.G.

    1987-03-01

    The radioisotope thermoelectric generator (RTG) that will supply power for the Galileo and Ulysses space missions contains 18 General-Purpose Heat Source (GPHS) modules. The GPHS modules provide power by transmitting the heat of STYPu -decay to an array of thermoelectric elements. Each module contains four STYPuO2-fueled clads and generates 250 W(t). Because the possibility of a launch vehicle explosion always exists, and because such an explosion could generate a field of high-energy fragments, the fueled clads within each GPHS module must survive fragment impact. The edge-on flyer plate tests were included in the Safety Verification Test series to provide information on the module/clad response to the impact of high-energy plate fragments. The test results indicate that the edge-on impact of a 3.2-mm-thick, aluminum-alloy (2219-T87) plate traveling at 915 m/s causes the complete release of fuel from capsules contained within a bare GPHS module, and that the threshold velocity sufficient to cause the breach of a bare, simulant-fueled clad impacted by a 3.5-mm-thick, aluminum-alloy (5052-T0) plate is approximately 140 m/s.

  18. General-Purpose Heat Source development: Safety Verification Test Program. Bullet/fragment test series

    SciTech Connect (OSTI)

    George, T.G.; Tate, R.E.; Axler, K.M.

    1985-05-01

    The radioisotope thermoelectric generator (RTG) that will provide power for space missions contains 18 General-Purpose Heat Source (GPHS) modules. Each module contains four /sup 238/PuO/sub 2/-fueled clads and generates 250 W/sub (t)/. Because a launch-pad or post-launch explosion is always possible, we need to determine the ability of GPHS fueled clads within a module to survive fragment impact. The bullet/fragment test series, part of the Safety Verification Test Plan, was designed to provide information on clad response to impact by a compact, high-energy, aluminum-alloy fragment and to establish a threshold value of fragment energy required to breach the iridium cladding. Test results show that a velocity of 555 m/s (1820 ft/s) with an 18-g bullet is at or near the threshold value of fragment velocity that will cause a clad breach. Results also show that an exothermic Ir/Al reaction occurs if aluminum and hot iridium are in contact, a contact that is possible and most damaging to the clad within a narrow velocity range. The observed reactions between the iridium and the aluminum were studied in the laboratory and are reported in the Appendix.

  19. Preliminary formation analysis for compressed air energy storage in depleted natural gas reservoirs : a study for the DOE Energy Storage Systems Program.

    SciTech Connect (OSTI)

    Gardner, William Payton

    2013-06-01

    The purpose of this study is to develop an engineering and operational understanding of CAES performance for a depleted natural gas reservoir by evaluation of relative permeability effects of air, water and natural gas in depleted natural gas reservoirs as a reservoir is initially depleted, an air bubble is created, and as air is initially cycled. The composition of produced gases will be evaluated as the three phase flow of methane, nitrogen and brine are modeled. The effects of a methane gas phase on the relative permeability of air in a formation are investigated and the composition of the produced fluid, which consists primarily of the amount of natural gas in the produced air are determined. Simulations of compressed air energy storage (CAES) in depleted natural gas reservoirs were carried out to assess the effect of formation permeability on the design of a simple CAES system. The injection of N2 (as a proxy to air), and the extraction of the resulting gas mixture in a depleted natural gas reservoir were modeled using the TOUGH2 reservoir simulator with the EOS7c equation of state. The optimal borehole spacing was determined as a function of the formation scale intrinsic permeability. Natural gas reservoir results are similar to those for an aquifer. Borehole spacing is dependent upon the intrinsic permeability of the formation. Higher permeability allows increased injection and extraction rates which is equivalent to more power per borehole for a given screen length. The number of boreholes per 100 MW for a given intrinsic permeability in a depleted natural gas reservoir is essentially identical to that determined for a simple aquifer of identical properties. During bubble formation methane is displaced and a sharp N2methane boundary is formed with an almost pure N2 gas phase in the bubble near the borehole. During cycling mixing of methane and air occurs along the boundary as the air bubble boundary moves. The extracted gas mixture changes as a function of time and proximity of the bubble boundary to the well. For all simulations reported here, with a formation radius above 50 m the maximum methane composition in the produced gas phase was less than 0.5%. This report provides an initial investigation of CAES in a depleted natural gas reservoir, and the results will provide useful guidance in CAES system investigation and design in the future.

  20. Controlled Irradiative Formation of Penitentes

    E-Print Network [OSTI]

    V. Bergeron; C. Berger; M. D. Betterton

    2006-01-24

    Spike-shaped structures are produced by light-driven ablation in very different contexts. Penitentes 1-4 m high are common on Andean glaciers, where their formation changes glacier dynamics and hydrology. Laser ablation can produce cones 10-100 microns high with a variety of proposed applications in materials science. We report the first laboratory generation of centimeter-scale snow and ice penitentes. Systematically varying conditions allows identification of the essential parameters controlling the formation of ablation structures. We demonstrate that penitente initiation and coarsening requires cold temperatures, so that ablation leads to sublimation rather than melting. Once penitentes have formed, further growth of height can occur by melting. The penitentes intially appear as small structures (3 mm high) and grow by coarsening to 1-5 cm high. Our results are an important step towards understanding and controlling ablation morphologies.

  1. Laser beam pulse formatting method

    DOE Patents [OSTI]

    Daly, T.P.; Moses, E.I.; Patterson, R.W.; Sawicki, R.H.

    1994-08-09

    A method for formatting a laser beam pulse using one or more delay loops is disclosed. The delay loops have a partially reflective beam splitter and a plurality of highly reflective mirrors arranged such that the laser beam pulse enters into the delay loop through the beam splitter and circulates therein along a delay loop length defined by the mirrors. As the laser beam pulse circulates within the delay loop a portion thereof is emitted upon each completed circuit when the laser beam pulse strikes the beam splitter. The laser beam pulse is thereby formatted into a plurality of sub-pulses. The delay loops are used in combination to produce complex waveforms by combining the sub-pulses using additive waveform synthesis. 8 figs.

  2. Shock Formation in Lovelock Theories

    E-Print Network [OSTI]

    Harvey S. Reall; Norihiro Tanahashi; Benson Way

    2014-09-12

    We argue that Lovelock theories of gravity suffer from shock formation, unlike General Relativity. We consider the propagation of (i) a discontinuity in curvature, and (ii) weak, high frequency, gravitational waves. Such disturbances propagate along characteristic hypersurfaces of a "background" spacetime and their amplitude is governed by a transport equation. In GR the transport equation is linear. In Lovelock theories, it is nonlinear and its solutions can blow up, corresponding to the formation of a shock. We show that this effect is absent in some simple cases e.g. a flat background spacetime, and demonstrate its presence for a plane wave background. We comment on weak cosmic censorship, the evolution of shocks, and the nonlinear stability of Minkowski spacetime, in Lovelock theories.

  3. A Minnesota Blizzard Provides Insight into Utility-Scale Wind...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    A Minnesota Blizzard Provides Insight into Utility-Scale Wind Turbine Wakes A Minnesota Blizzard Provides Insight into Utility-Scale Wind Turbine Wakes September 12, 2014 - 11:22am...

  4. Utilizing the Traction Drive Power Electronics System to Provide...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Traction Drive Power Electronics System to Provide Plug-in Capability for PHEVs Utilizing the Traction Drive Power Electronics System to Provide Plug-in Capability for PHEVs 2009...

  5. Wind Projects Providing Hope for Penn. Workers | Department of...

    Office of Environmental Management (EM)

    Projects Providing Hope for Penn. Workers Wind Projects Providing Hope for Penn. Workers March 8, 2010 - 11:28am Addthis Joshua DeLung The Recovery Act made three large-scale wind...

  6. Enzyme Structure Provides Insights into Cancer and Aging

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Enzyme Structure Provides Insights into Cancer and Aging Enzyme Structure Provides Insights into Cancer and Aging Print Wednesday, 25 February 2009 00:00 XPD helicase is an enzyme...

  7. DOE Inter-Tribal Technical Assistance Energy Provider Network...

    Energy Savers [EERE]

    Inter-Tribal Technical Assistance Energy Provider Network RFI DOE Inter-Tribal Technical Assistance Energy Provider Network RFI October 29, 2015 5:00PM EDT U.S. Department of...

  8. Membrane adhesion and domain formation

    E-Print Network [OSTI]

    Thomas R. Weikl; Reinhard Lipowsky

    2007-09-23

    We review theoretical results for the adhesion-induced phase behavior of biomembranes. The focus is on models in which the membranes are represented as discretized elastic sheets with embedded adhesion molecules. We present several mechanism that lead to the formation of domains during adhesion, and discuss the time-dependent evolution of domain patterns obtained in Monte-Carlo simulations. The simulated pattern dynamics has striking similarities to the pattern evolution observed during T cell adhesion.

  9. Technical Assistance to ISO's and Grid Operators For Loads Providing...

    Office of Environmental Management (EM)

    & Publications Loads Providing Ancillary Services: Review of International Experience Demand Response and Energy Storage Integration Study - Past Workshops Load Participation...

  10. Absorption and elimination of formate following oral administration of calcium formate in female human subjects

    E-Print Network [OSTI]

    Hanzlik, Robert P.; Fowler, Stephen C.; Eells, Janis T.

    2005-02-01

    Published abstract: Calcium formate is a water-soluble salt of an essential mineral nutrient with potential for use as a dietary calcium supplement. Formate ion is a product of endogenous and xenobiotic metabolism, but sustained high plasma formate...

  11. MODEL REQUEST FOR PROPOSALS TO PROVIDE ENERGY AND OTHER

    E-Print Network [OSTI]

    Firestone, Jeremy

    MODEL REQUEST FOR PROPOSALS TO PROVIDE ENERGY AND OTHER ATTRIBUTES FROM AN OFFSHORE WIND POWER Gallagher for their comments and suggestions. #12;2 Model Request for Proposals to Provide Energy and other..............................................................................................................14 #12;3 Model Request for Proposals to Provide Energy and other Attributes from an Offshore Wind

  12. The Mechanism of First Raindrops Formation in Deep Convective Clouds

    SciTech Connect (OSTI)

    Khain, Alexander; Prabha, Thara; Benmoshe, Nir; Pandithurai, G.; Ovchinnikov, Mikhail

    2013-08-22

    The formation of first raindrops in deep convective clouds is investigated. A combination of observational data analysis and 2-D and 3-D numerical bin microphysical simulations of deep convective clouds suggests that the first raindrops form at the top of undiluted or slightly diluted cores. It is shown that droplet size distributions in these regions are wider and contain more large droplets than in diluted volumes. The results of the study indicate that the initial raindrop formation is determined by the basic microphysical processes within ascending adiabatic volumes. It allows one to predict the height of the formation of first raindrops considering the processes of nucleation, diffusion growth and collisions. The results obtained in the study explain observational results reported by Freud and Rosenfeld (2012) according to which the height of first raindrop formation depends linearly on the droplet number concentration at cloud base. The results also explain why a simple adiabatic parcel model can reproduce this dependence. The present study provides a physical basis for retrieval algorithms of cloud microphysical properties and aerosol properties using satellites proposed by Rosenfeld et al. ( 2012). The study indicates that the role of mixing and entrainment in the formation of the first raindrops is not of crucial importance. It is also shown that low variability of effective and mean volume radii along horizontal traverses, as regularly observed by in situ measurements, can be simulated by high-resolution cloud models, in which mixing is parameterized by a traditional 1.5 order turbulence closure scheme.

  13. TOUGH2: A general-purpose numerical simulator for multiphase nonisothermal flows

    SciTech Connect (OSTI)

    Pruess, K. [Lawrence Berkeley Lab., CA (United States)

    1991-06-01

    Numerical simulators for multiphase fluid and heat flows in permeable media have been under development at Lawrence Berkeley Laboratory for more than 10 yr. Real geofluids contain noncondensible gases and dissolved solids in addition to water, and the desire to model such `compositional` systems led to the development of a flexible multicomponent, multiphase simulation architecture known as MULKOM. The design of MULKOM was based on the recognition that the mass-and energy-balance equations for multiphase fluid and heat flows in multicomponent systems have the same mathematical form, regardless of the number and nature of fluid components and phases present. Application of MULKOM to different fluid mixtures, such as water and air, or water, oil, and gas, is possible by means of appropriate `equation-of-state` (EOS) modules, which provide all thermophysical and transport parameters of the fluid mixture and the permeable medium as a function of a suitable set of primary thermodynamic variables. Investigations of thermal and hydrologic effects from emplacement of heat-generating nuclear wastes into partially water-saturated formations prompted the development and release of a specialized version of MULKOM for nonisothermal flow of water and air, named TOUGH. TOUGH is an acronym for `transport of unsaturated groundwater and heat` and is also an allusion to the tuff formations at Yucca Mountain, Nevada. The TOUGH2 code is intended to supersede TOUGH. It offers all the capabilities of TOUGH and includes a considerably more general subset of MULKOM modules with added capabilities. The paper briefly describes the simulation methodology and user features.

  14. Measurement of the Formation Rate of Muonic Hydrogen Molecules

    E-Print Network [OSTI]

    Andreev, V A; Carey, R M; Case, T A; Clayton, S M; Crowe, K M; Deutsch, J; Egger, J; Freedman, S J; Ganzha, V A; Gorringe, T; Gray, F E; Hertzog, D W; Hildebrandt, M; Kammel, P; Kiburg, B; Knaack, S; Kravtsov, P A; Krivshich, A G; Lauss, B; Lynch, K R; Maev, E M; Maev, O E; Mulhauser, F; Petitjean, C; Petrov, G E; Prieels, R; Schapkin, G N; Semenchuk, G G; Soroka, M A; Tishchenko, V; Vasilyev, A A; Vorobyov, A A; Vznuzdaev, M E; Winter, P

    2015-01-01

    Background: The rate \\lambda_pp\\mu\\ characterizes the formation of pp\\mu\\ molecules in collisions of muonic p\\mu\\ atoms with hydrogen. In measurements of the basic weak muon capture reaction on the proton to determine the pseudoscalar coupling g_P, capture occurs from both atomic and molecular states. Thus knowledge of \\lambda_pp\\mu\\ is required for a correct interpretation of these experiments. Purpose: Recently the MuCap experiment has measured the capture rate \\Lambda_S from the singlet p\\mu\\ atom, employing a low density active target to suppress pp\\mu\\ formation (PRL 110, 12504 (2013)). Nevertheless, given the unprecedented precision of this experiment, the existing experimental knowledge in \\lambda_pp\\mu\\ had to be improved. Method: The MuCap experiment derived the weak capture rate from the muon disappearance rate in ultra-pure hydrogen. By doping the hydrogen with 20 ppm of argon, a competing process to pp\\mu\\ formation was introduced, which allowed the extraction of \\lambda_pp\\mu\\ from the observed t...

  15. Implementation of a Cloud Data Server (CDS) for Providing Secure Service in E-Business

    E-Print Network [OSTI]

    Kesavaraja, D; Sasireka, D; 10.5121/ijdms.2010.2203

    2010-01-01

    Cloud Data Servers is the novel approach for providing secure service to e-business .Millions of users are surfing the Cloud for various purposes, therefore they need highly safe and persistent services. Usually hackers target particular Operating Systems or a Particular Controller. Inspiteof several ongoing researches Conventional Web Servers and its Intrusion Detection System might not be able to detect such attacks. So we implement a Cloud Data Server with Session Controller Architecture using Redundancy and Disconnected Data Access Mechanism. In this paper, we generate the hash code using MD5 algorithm. With the help of which we can circumvent even the attacks, which are undefined by traditional Systems .we implement Cloud Data Sever using Java and Hash Code backup Management using My SQL. Here we Implement AES Algorithm for providing more Security for the hash Code. The CDS using the Virtual Controller controls and monitors the Connections and modifications of the page so as to prevent malicious users fr...

  16. Structure formation: Models, Dynamics and Status

    E-Print Network [OSTI]

    T. Padmanabhan

    1995-08-25

    The constraints on the models for the structure formation arising from various cosmological observations at different length scales are reviewed. The status of different models for structure formation is examined critically in the light of these observations.

  17. Dynamics and control of electromagnetic satellite formations

    E-Print Network [OSTI]

    Ahsun, Umair, 1972-

    2007-01-01

    Satellite formation flying is an enabling technology for many space missions, especially for space-based telescopes. Usually there is a tight formation-keeping requirement that may need constant expenditure of fuel or at ...

  18. Formation damage in underbalanced drilling operations 

    E-Print Network [OSTI]

    Reyes Serpa, Carlos Alberto

    2003-01-01

    Formation damage has long been recognized as a potential source of reduced productivity and injectivity in both horizontal and vertical wells. From the moment that the pay zone is being drilled until the well is put on production, a formation...

  19. La cl informatique Formation Word XP

    E-Print Network [OSTI]

    Vellend, Mark

    La clé informatique Formation Word XP Aide-mémoire Hiver 2004 #12;#12;Formation Word XP Hiver 2004 1. PRÉSENTATION DE L'INTERFACE DE MICROSOFT WORD XP................ 1 1.1. L'interface générale

  20. Proportional structural effects of formative indicators

    E-Print Network [OSTI]

    Franke, George R.; Preacher, Kristopher J.; Rigdon, Ed E.

    2009-03-15

    that are proportional to their effects on the formative construct itself. This constraint has important implications for developing and testing formative models. This study demonstrates the existence of the constraint, shows that researchers must consider...

  1. Electromagnetic Formation Flight of Satellite Arrays

    E-Print Network [OSTI]

    Electromagnetic Formation Flight of Satellite Arrays Daniel W. Kwon and David W. Miller February 2005 SSL # 2-05 #12;#12;Electromagnetic Formation Flight of Satellite Arrays By DANIEL W. KWON S;#12;Electromagnetic Formation Flight of Satellite Arrays by DANIEL W. KWON Submitted to the Department of Aeronautics

  2. SAR image formation with azimuth interpolation after azimuth transform

    DOE Patents [OSTI]

    Doerry; Armin W. (Albuquerque, NM), Martin; Grant D. (Marlborough, MA), Holzrichter; Michael W. (Albuquerque, NM)

    2008-07-08

    Two-dimensional SAR data can be processed into a rectangular grid format by subjecting the SAR data to a Fourier transform operation, and thereafter to a corresponding interpolation operation. Because the interpolation operation follows the Fourier transform operation, the interpolation operation can be simplified, and the effect of interpolation errors can be diminished. This provides for the possibility of both reducing the re-grid processing time, and improving the image quality.

  3. Executive Summary HEALTH OF THE FRASER RIVER AQUATIC ECOSYSTEM The purpose of the Fraser River Action Plan (FRAP) was to restore the environmental health and

    E-Print Network [OSTI]

    iii Executive Summary HEALTH OF THE FRASER RIVER AQUATIC ECOSYSTEM Executive Summary The purpose in the Fraser Basin's aquatic ecosystem. The program was led by Environment Canada and conducted by scientists, was also used. The synthesis of information provided by these indicators records the status of the basin

  4. Electrochemical formation of field emitters

    SciTech Connect (OSTI)

    Bernhardt, Anthony F. (Berkeley, CA)

    1999-01-01

    Electrochemical formation of field emitters, particularly useful in the fabrication of flat panel displays. The fabrication involves field emitting points in a gated field emitter structure. Metal field emitters are formed by electroplating and the shape of the formed emitter is controlled by the potential imposed on the gate as well as on a separate counter electrode. This allows sharp emitters to be formed in a more inexpensive and manufacturable process than vacuum deposition processes used at present. The fabrication process involves etching of the gate metal and the dielectric layer down to the resistor layer, and then electroplating the etched area and forming an electroplated emitter point in the etched area.

  5. Formation Flying and Deformable Instruments

    SciTech Connect (OSTI)

    Rio, Yvon

    2009-05-11

    Astronomers have always attempted to build very stable instruments. They fight all that can cause mechanical deformation or image motion. This has led to well established technologies (autoguide, active optics, thermal control, tip/tilt correction), as well as observing methods based on the use of controlled motion (scanning, micro scanning, shift and add, chopping and nodding). Formation flying disturbs this practice. It is neither possible to reduce the relative motion to very small amplitudes, nor to control it at will. Some impacts on Simbol-X instrument design, and operation are presented.

  6. SUPPRESSION OF STAR FORMATION IN NGC 1266

    SciTech Connect (OSTI)

    Alatalo, Katherine; Lanz, Lauranne; Bitsakis, Theodoros; Appleton, Philip N.; Ogle, Patrick M.; Lacy, Mark; Lonsdale, Carol J.; Nyland, Kristina; Meier, David S.; Cales, Sabrina L.; Chang, Philip; Davis, Timothy A.; De Zeeuw, P. T.; Martín, Sergio

    2015-01-01

    NGC 1266 is a nearby lenticular galaxy that harbors a massive outflow of molecular gas powered by the mechanical energy of an active galactic nucleus (AGN). It has been speculated that such outflows hinder star formation (SF) in their host galaxies, providing a form of feedback to the process of galaxy formation. Previous studies, however, indicated that only jets from extremely rare, high-power quasars or radio galaxies could impart significant feedback on their hosts. Here we present detailed observations of the gas and dust continuum of NGC 1266 at millimeter wavelengths. Our observations show that molecular gas is being driven out of the nuclear region at M-dot {sub out}?110 M{sub ?} yr{sup –1}, of which the vast majority cannot escape the nucleus. Only 2 M {sub ?} yr{sup –1} is actually capable of escaping the galaxy. Most of the molecular gas that remains is very inefficient at forming stars. The far-infrared emission is dominated by an ultra-compact (? 50 pc) source that could either be powered by an AGN or by an ultra-compact starburst. The ratio of the SF surface density (?{sub SFR}) to the gas surface density (?{sub H{sub 2}}) indicates that SF is suppressed by a factor of ?50 compared to normal star-forming galaxies if all gas is forming stars, and ?150 for the outskirt (98%) dense molecular gas if the central region is powered by an ultra-compact starburst. The AGN-driven bulk outflow could account for this extreme suppression by hindering the fragmentation and gravitational collapse necessary to form stars through a process of turbulent injection. This result suggests that even relatively common, low-power AGNs are able to alter the evolution of their host galaxies as their black holes grow onto the M-? relation.

  7. NNSA Provides More Than $290 Million in Small Business Contract...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Security Administration (NNSA) today announced that it provided more than 290 million in small business obligations for federal prime contracts in fiscal year 2012. Almost 80...

  8. Using Partnerships to Drive Demand and Provide Services in Communities...

    Broader source: Energy.gov (indexed) [DOE]

    Program Multifamily and Low-Income Peer Exchange Call: Using Partnerships to Drive Demand and Provide Services in Communities, February 2, 2012. Call Slides and Discussion...

  9. Lab scientist from Española provides technical assistance to...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Espaola provides technical assistance to small New Mexico businesses Wind, solar and hydro energy production can be viable business options November 1, 2014 Scientist Marvin...

  10. Competition Provides Students with Real-World Engineering Experience...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to use less petroleum. These technologies will provide Americans with greater freedom of mobility and energy security, while lowering costs and reducing impacts on the...

  11. Texas - PUC Substantive Rule 25.198 - Electric Service Providers...

    Open Energy Info (EERE)

    Texas - PUC Substantive Rule 25.198 - Electric Service Providers-Open Access Comparable Transmission Service for Electric Utilities in the Electric Reliability Council of Texas...

  12. Microsoft PowerPoint - Marion Gold.Providence.Infrastructure...

    Broader source: Energy.gov (indexed) [DOE]

    panel approves 12.1 percent rate hike for electricity" -G. Wayne Miller, Providence Journal December 20, 2013 http:www.providencejournal.combreaking-newscontent...

  13. CRISPR--a widespread system that provides acquired resistance...

    Office of Scientific and Technical Information (OSTI)

    CRISPR--a widespread system that provides acquired resistance against phages in bacteria and archaea. Citation Details In-Document Search Title: CRISPR--a widespread system that...

  14. State and Alternative Fuel Provider Fleet Compliance Methods (Revised) (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2009-12-01

    Fact sheet describes the difference between Standard and Alternative Compliance requirements for state and alternative fuel provider fleets covered under the Energy Policy Acts of 1992 and 2005.

  15. State and Alternative Fuel Provider Fleet Compliance Methods (Revised) (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2014-03-01

    This fact sheet describes the difference between Standard and Alternative Compliance requirements for state and alternative fuel provider fleets covered by the Energy Policy Act.

  16. Sandia Energy - More California Gas Stations Can Provide Hydrogen...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    More California Gas Stations Can Provide Hydrogen than Previously Thought, Sandia Study Says Home Infrastructure Security Energy Transportation Energy CRF Facilities News News &...

  17. ARPES Provides Direct Evidence of Spin-Wave Coupling

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ARPES Provides Direct Evidence of Spin-Wave Coupling Print The electronic properties of a metal are determined by the dynamical behavior of its conduction electrons. Conventional...

  18. New Environmental Education Web Site Provides a Wealth of Information

    E-Print Network [OSTI]

    Stoss, Frederick W.

    1996-01-01

    expertise in environmental education and educational reform.New Environmental Education Web Site Provides a Wealth ofbring the topic of Environmental education to the classroom

  19. Compact, electro-hydraulic, variable valve actuation system providing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Compact, electro-hydraulic, variable valve actuation system providing variable lift, timing and duration to enable high efficiency engine combustion control Compact,...

  20. Opportunities for Mass Market Demand Response to Provide Ancillary Services

    SciTech Connect (OSTI)

    Pratt, Rob; Najewicz, Dave

    2011-10-01

    Discusses what is meant by mass market demand response to provide ancillary services and outlines opportunities for adoption, and barriers to adoption.

  1. Carrots for Utilities: Providing Financial Returns for Utility...

    Open Energy Info (EERE)

    Carrots for Utilities: Providing Financial Returns for Utility Investments in Energy Efficiency Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Carrots for Utilities:...

  2. Commercial Building Loads Providing Ancillary Services in PJM

    E-Print Network [OSTI]

    MacDonald, Jason

    2014-01-01

    P. Barooah, and S. Meyn. "Ancillary service for the grid viaet al. "Demand Response for Ancillary Services." (2013): 1-8Demand Response Providing Ancillary Services: A Comparison

  3. EECBG Success Story: Solar Projects Provide Energy to County...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solar Projects Provide Energy to County Fairgrounds September 23, 2010 - 1:01pm Addthis Solar panels have been installed at a shelter facility near Ulster County Fairgrounds. |...

  4. Merit Review: EPAct State and Alternative Fuel Provider Fleets...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications 2012 Merit Review: EPAct State and Alternative Fuel Provider Fleets Vehicle Technologies Office Merit Review 2014: EPAct State and Alternative...

  5. Commercial Building Loads Providing Ancillary Services in PJM

    E-Print Network [OSTI]

    MacDonald, Jason

    2014-01-01

    and Communications for Demand Response and Energy EfficiencyM. Hummon et al. "Demand Response for Ancillary Services." (and S. Kiliccote. 2012. “Demand Response Providing Ancillary

  6. OVTP Merit Review EPAct State & Alternative Fuel Provider Data...

    Energy Savers [EERE]

    Merit Review: EPAct State and Alternative Fuel Provider Fleets Vehicles Home About the Vehicle Technologies Office Plug-in Electric Vehicles & Batteries Fuel Efficiency &...

  7. General purpose steam table library : CASL L3:THM.CFD.P7.04 milestone report.

    SciTech Connect (OSTI)

    Carpenter, John H.; Belcourt, Noel; Nourgaliev, Robert

    2013-08-01

    Completion of the CASL L3 milestone THM.CFD.P7.04 provides a general purpose tabular interpolation library for material properties to support, in particular, standardized models for steam properties. The software consists of three parts, implementations of analytic steam models, a code to generate tables from those models, and an interpolation package to interface the tables to CFD codes such as Hydra-TH. Verification of the standard model is maintained through the entire train of routines. The performance of interpolation package exceeds that of freely available analytic implementation of the steam properties by over an order of magnitude.

  8. Heating tar sands formations while controlling pressure

    DOE Patents [OSTI]

    Stegemeier, George Leo (Houston, TX) [Houston, TX; Beer, Gary Lee (Houston, TX) [Houston, TX; Zhang, Etuan (Houston, TX) [Houston, TX

    2010-01-12

    Methods for treating a tar sands formation are described herein. Methods may include heating at least a section of a hydrocarbon layer in the formation from a plurality of heaters located in the formation. A pressure in the majority of the section may be maintained below a fracture pressure of the formation. The pressure in the majority of the section may be reduced to a selected pressure after the average temperature reaches a temperature that is above 240.degree. C. and is at or below pyrolysis temperatures of hydrocarbons in the section. At least some hydrocarbon fluids may be produced from the formation.

  9. Coke formation in visbreaking process

    SciTech Connect (OSTI)

    Yan, T.Y. )

    1987-04-01

    Visbreaking is a mild cracking process primarily used to reduce residual oil viscosity and thus decrease the amount of cutter stock required for blending to heavy fuels specification. It can also be used to produce incremental quantities of gasoline, middle distillates and catalytic cracker feeds. This process was widely used in the 1930s and 1940s and became obsolete until a few years ago. When the need for increased conversion of residues to light products became desirable, visbreaking offered economic advantages to many refining schemes - especially in Western Europe. Between 1978-1981, Exxon brought on stream seven visbreakers ranging from 1900 to 9100 tons/SD capacity. In January 1983, the world-wide visbreaking capacity was over 2 MM B/SD. The visbreaking process and its application in refinery operations have been well described. In general, the process economics improve as the process severity is increased but it is limited by coke formation in the process. For this reason, they have studied the kinetics of coke formation in the visbreaking process.

  10. Measurement of the Formation Rate of Muonic Hydrogen Molecules

    E-Print Network [OSTI]

    MuCap Collaboration; V. A. Andreev; T. I. Banks; R. M. Carey; T. A. Case; S. M. Clayton; K. M. Crowe; J. Deutsch; J. Egger; S. J. Freedman; V. A. Ganzha; T. Gorringe; F. E. Gray; D. W. Hertzog; M. Hildebrandt; P. Kammel; B. Kiburg; S. Knaack; P. A. Kravtsov; A. G. Krivshich; B. Lauss; K. R. Lynch; E. M. Maev; O. E. Maev; F. Mulhauser; C. Petitjean; G. E. Petrov; R. Prieels; G. N. Schapkin; G. G. Semenchuk; M. A. Soroka; V. Tishchenko; A. A. Vasilyev; A. A. Vorobyov; M. E. Vznuzdaev; P. Winter

    2015-02-03

    Background: The rate \\lambda_pp\\mu\\ characterizes the formation of pp\\mu\\ molecules in collisions of muonic p\\mu\\ atoms with hydrogen. In measurements of the basic weak muon capture reaction on the proton to determine the pseudoscalar coupling g_P, capture occurs from both atomic and molecular states. Thus knowledge of \\lambda_pp\\mu\\ is required for a correct interpretation of these experiments. Purpose: Recently the MuCap experiment has measured the capture rate \\Lambda_S from the singlet p\\mu\\ atom, employing a low density active target to suppress pp\\mu\\ formation (PRL 110, 12504 (2013)). Nevertheless, given the unprecedented precision of this experiment, the existing experimental knowledge in \\lambda_pp\\mu\\ had to be improved. Method: The MuCap experiment derived the weak capture rate from the muon disappearance rate in ultra-pure hydrogen. By doping the hydrogen with 20 ppm of argon, a competing process to pp\\mu\\ formation was introduced, which allowed the extraction of \\lambda_pp\\mu\\ from the observed time distribution of decay electrons. Results: The pp\\mu\\ formation rate was measured as \\lambda_pp\\mu = (2.01 +- 0.06(stat) +- 0.03(sys)) 10^6 s^-1. This result updates the \\lambda_pp\\mu\\ value used in the above mentioned MuCap publication. Conclusions: The 2.5x higher precision compared to earlier experiments and the fact that the measurement was performed at nearly identical conditions to the main data taking, reduces the uncertainty induced by \\lambda_pp\\mu\\ to a minor contribution to the overall uncertainty of \\Lambda_S and g_P, as determined in MuCap. Our final value for \\lambda_pp\\mu\\ shifts \\Lambda_S and g_P by less than one tenth of their respective uncertainties compared to our results published earlier.

  11. Child Care Provider Training Helping Early Childhood Educators

    E-Print Network [OSTI]

    Child Care Provider Training Helping Early Childhood Educators Provide Quality Care for Today that were not conducted by Extension. In addition to the face-to-face conferences, early childhood educators at these conferences on a variety of topics related to child care. Online Training. Extension's Early Childhood

  12. Fuel cells: providing heat and power in the urban environment

    E-Print Network [OSTI]

    Watson, Andrew

    Fuel cells: providing heat and power in the urban environment Jim Halliday, Alan Ruddell, Jane;Fuel cells: providing heat and power in the urban environment Tyndall Centre Technical Report No. 32 efficiencies, and therefore reduced CO2 emissions, compared to conventional centralised generation. Fuel cell

  13. Providing Internet access to Los Alamos National Laboratory technical reports: A case history in providing public access to previously restricted documents

    SciTech Connect (OSTI)

    Collins, K.A.

    1996-12-31

    The Los Alamos National Laboratory (LANL) Research Library recently fulfilled a strategic goal of providing worldwide desktop access via the Internet to full-image files of the complete unclassified holdings of Los Alamos technical reports in its Report Collection. This effort began in late 1994 with the scanning of paper and microfiche format reports. Concurrently, the Research Library helped to initiate shifting the model for publishing new technical reports from paper to electronic; the files could then be directly mounted on the Research Library`s Web server. Providing desktop access to these reports was instrumental in expediting the development of internal policies that would better define what documents, previously restricted to the general public, could be publicly released. Undoubtedly, the most significant category of such reports were previously classified reports that had been declassified, but had not gone through a further review for public release. Collaboration with LANL`s Classification Group led to approval for public release of 97% of these reports. The LANL Research Library`s Web site now offers unique and unprecedented access to the world of a huge body of technical reports never available before anywhere in any form. This paper discusses the issues and steps involved in this achievement.

  14. Modeling of Reoxidation Inclusion Formation in Steel Sand Casting K.D. Carlson, A.J. Melendez and C. Beckermann

    E-Print Network [OSTI]

    Beckermann, Christoph

    1 Modeling of Reoxidation Inclusion Formation in Steel Sand Casting K.D. Carlson, A.J. Melendez, as well as their final locations on the surface of steel sand castings. Inclusions originate on the melt. The inclusion model is implemented in a general-purpose casting simulation code. The model is validated

  15. Initial Assessment of U.S. Refineries for Purposes of Potential...

    Office of Scientific and Technical Information (OSTI)

    U.S. Refineries for Purposes of Potential Bio-Based Oil Insertions Freeman, Charles J.; Jones, Susanne B.; Padmaperuma, Asanga B.; Santosa, Daniel M.; Valkenburg, Corinne; Shinn,...

  16. Methods and apparatus for measurement of electronic properties of geological formations through borehole casing

    DOE Patents [OSTI]

    Vail, III, William B. (Bothell, WA)

    1989-01-01

    Methods and apparatus are provided for measuring electronic properties of geological formations and cement layers adjacent to cased boreholes including resistivities, polarization phenomena and dielectric constants. Current is passed from an electrode in electrical contact with the interior of the borehole casing to an electrode on the surface of the earth. At least three voltage measuring electrodes in electrical contact with the interior of the casing measure the voltage at various points thereon. The voltage differences between discrete pairs of the voltage measuring electrodes provide a measurement of differential current conducted into formation in the vicinity of those electrodes. These measurements facilitate calculation of the resistivities of the adjacent geological formations as well as an indication of whether cement is present. Measurements of the differential voltage response to transient currents provide a measurement of the polarization phenomena in formation as well as the capacitance of the casing in contact with the formation which is useful for determining whether oil and gas are present. Lithological characteristics of the formation such as the presence or absence of clay can also be determined. A calibration procedure is provided for minimizing errors induced by variations in the casing. The device also may be placed within the pipe attached to a drill bit while drilling open holes.

  17. Methods and apparatus for measurement of electronic properties of geological formations through borehole casing

    DOE Patents [OSTI]

    Vail, III, William B. (Bothell, WA)

    1991-01-01

    Methods and apparatus are provided for measuring electronic properties of geological formations and cement layers adjacent to cased boreholes including resistivities, polarization phenomena and dielectric constants. Current is passed from an electrode in electrical contact with the interior of the borehole casing to an electrode on the surface of the earth. At least three voltage measuring electrodes in electrical contact with the interior of the casing measure the voltage at various points thereon. The voltage differences between discrete pairs of the voltage measuring electrodes provide a measurement of the differential current conducted into formation in the vicinity of those electrodes. These measurements facilitate calculation of the resistivities of the adjacent geological formations as well as an indication of whether cement is present. Measurements of the differential voltage response to transient currents provide a measurement of the polarization phenomena in formation as well as the capacitance of the casing in contact with the formation which is useful for determining whether oil and gas present. Lithological characteristics of the formation such as the pressence or absence of clay can also be determined. A calibration procedure is provided for minimizing errors induced by variations in the casing. The device also may be placed within the pipe attached to a drill bit while drilling open holes.

  18. Methods and apparatus for measurement of electronic properties of geological formations through borehole casing

    DOE Patents [OSTI]

    Vail, W.B. III.

    1989-11-21

    Methods and apparatus are provided for measuring electronic properties of geological formations and cement layers adjacent to cased boreholes including resistivities, polarization phenomena and dielectric constants. Current is passed from an electrode in electrical contact with the interior of the borehole casing to an electrode on the surface of the earth. At least three voltage measuring electrodes in electrical contact with the interior of the casing measure the voltage at various points thereon. The voltage differences between discrete pairs of the voltage measuring electrodes provide a measurement of differential current conducted into formation in the vicinity of those electrodes. These measurements facilitate calculation of the resistivities of the adjacent geological formations as well as an indication of whether cement is present. Measurements of the differential voltage response to transient currents provide a measurement of the polarization phenomena in formation as well as the capacitance of the casing in contact with the formation which is useful for determining whether oil and gas are present. Lithological characteristics of the formation such as the presence or absence of clay can also be determined. A calibration procedure is provided for minimizing errors induced by variations in the casing. The device also may be placed within the pipe attached to a drill bit while drilling open holes. 48 figs.

  19. Methods and apparatus for measurement of electronic properties of geological formations through borehole casing

    DOE Patents [OSTI]

    Vail, W.B. III.

    1991-08-27

    Methods and apparatus are provided for measuring electronic properties of geological formations and cement layers adjacent to cased boreholes including resistivities, polarization phenomena and dielectric constants. Current is passed from an electrode in electrical contact with the interior of the borehole casing to an electrode on the surface of the earth. At least three voltage measuring electrodes in electrical contact with the interior of the casing measure the voltage at various points thereon. The voltage differences between discrete pairs of the voltage measuring electrodes provide a measurement of the differential current conducted into the formation in the vicinity of those electrodes. These measurements facilitate calculation of the resistivities of the adjacent geological formations as well as an indication of whether cement is present. Measurements of the differential voltage response to transient currents provide a measurement of the polarization phenomena in formation as well as the capacitance of the casing in contact with the formation which is useful for determining whether oil and gas are present. Lithological characteristics of the formation such as the presence or absence of clay can also be determined. A calibration procedure is provided for minimizing errors induced by variations in the casing. The device also may be placed within the pipe attached to a drill bit while drilling open holes. 48 figures.

  20. The Recent Cluster Formation Histories of NGC 5253 and NGC 3077: Environmental Impact on Star Formation

    E-Print Network [OSTI]

    J. Harris; D. Calzetti; J. S. Gallagher III; D. A. Smith; C. J. Conselice

    2003-11-20

    We present multicolor photometry of bright star cluster candidates in the nearby starburst galaxies NGC 3077 and NGC 5253, observed with the Hubble Space Telescope Wide Field and Planetary Camera 2 in both broadband (F300W, F547M and F814W) and narrowband (F487N and F656N) filters. By comparing the photometry with theoretical population synthesis models, we estimate the age and mass of each star cluster, which provides constraints on the recent star formation histories of the host galaxies. We compare the star cluster populations in these dwarf starburst galaxies to those of the nuclear starburst in the barred spiral M 83, and discuss implications for our understanding of the nature and evolution of starburst events.

  1. Electrochemical formation of field emitters

    DOE Patents [OSTI]

    Bernhardt, A.F.

    1999-03-16

    Electrochemical formation of field emitters, particularly useful in the fabrication of flat panel displays is disclosed. The fabrication involves field emitting points in a gated field emitter structure. Metal field emitters are formed by electroplating and the shape of the formed emitter is controlled by the potential imposed on the gate as well as on a separate counter electrode. This allows sharp emitters to be formed in a more inexpensive and manufacturable process than vacuum deposition processes used at present. The fabrication process involves etching of the gate metal and the dielectric layer down to the resistor layer, and then electroplating the etched area and forming an electroplated emitter point in the etched area. 12 figs.

  2. Adaptive Optics in Star Formation

    E-Print Network [OSTI]

    Wolfgang Brandner

    2003-09-29

    Over the past ten years, the concept of adaptive optics has evolved from early experimental stages to a standard observing tool now available at almost all major optical and near-infrared telescope facilities. Adaptive optics will also be essential in exploiting the full potential of the large optical/infrared interferometers currently under construction. Both observations with high-angular resolution and at high contrast, and with a high point source sensitivity are facilitated by adaptive optics. Among the areas which benefit most from the use of adaptive optics are studies of the circumstellar environment (envelopes, disks, outflows), substellar companions and multiple systems, and dense young stellar populations. This contribution highlights some of the recent advances in star formation studies facilitated by adaptive optics, and gives a brief tutorial on optimized observing and data reduction strategies.

  3. Formation of helical ion chains

    E-Print Network [OSTI]

    Ramil Nigmatullin; Adolfo del Campo; Gabriele De Chiara; Giovanna Morigi; Martin B. Plenio; Alex Retzker

    2015-08-25

    We study the nonequilibrium dynamics of the linear to zigzag structural phase transition exhibited by an ion chain confined in a trap with periodic boundary conditions. The transition is driven by reducing the transverse confinement at a finite quench rate, which can be accurately controlled. This results in the formation of zigzag domains oriented along different transverse planes. The twists between different domains can be stabilized by the topology of the trap and under laser cooling the system has a chance to relax to a helical chain with nonzero winding number. Molecular dynamics simulations are used to obtain a large sample of possible trajectories for different quench rates. The scaling of the average winding number with different quench rates is compared to the prediction of the Kibble-Zurek theory, and a good quantitative agreement is found.

  4. IN FORMATION PU BLIC ATION SC H EME TITLE Agency plan for The Australian National University

    E-Print Network [OSTI]

    1 | IN FORMATION PU BLIC ATION SC H EME TITLE Agency plan for The Australian National University on its website. It will be directly accessible from the webpage foi.anu.edu.au and be identified possible, provide online content that can be searched by web browsers Provide a search function

  5. Abstract: In this paper we provide a systematic review of generator-provided reactive support as an unbundled ancillary

    E-Print Network [OSTI]

    including generators, shunt capacitors/reactors, synchronous condensers and static VAr compensators. Since1 Abstract: In this paper we provide a systematic review of generator-provided reactive support costs, which are evaluated from the foregone profits of a generator in the real power markets

  6. Segue 1 - A Compressed Star Formation History Before Reionization

    E-Print Network [OSTI]

    Webster, David; Bland-Hawthorn, Joss

    2015-01-01

    Segue 1 is the current best candidate for a "first galaxy", a system which experienced only a single short burst of star formation and has since remained unchanged. Here we present possible star formation scenarios which can explain its unique metallicity distribution. While the majority of stars in all other ultra-faint dwarfs (UFDs) are within 0.5 dex of the mean [Fe/H] for the galaxy, 5 of the 7 stars in Segue 1 have a spread of $\\Delta$[Fe/H] $>0.8$ dex. We show that this distribution of metallicities canot be explained by a gradual build-up of stars, but instead requires clustered star formation. Chemical tagging allows the separate unresolved delta functions in abundance space to be associated with discrete events in space and time. This provides an opportunity to put the enrichment events into a time sequence and unravel the history of the system. We investigate two possible scenarios for the star formation history of Segue 1 using Fyris Alpha simulations of gas in a $10^7$ M$_\\odot$ dark matter halo. ...

  7. Developing a global strategy for a Brazilian engineering services provider

    E-Print Network [OSTI]

    Oliveira, Abner Lima de

    2008-01-01

    The Delta Model framework is used in this work to assess a engineering services provider's current and desired level of customer bonding and define a Strategic Plan towards a global operation. Several other frameworks serve ...

  8. Providing Microgrid Resilience during Emergencies using Distributed Energy Resources

    E-Print Network [OSTI]

    Eliassen, Frank

    Providing Microgrid Resilience during Emergencies using Distributed Energy Resources Sabita resilience of a microgrid during emergencies. First, we propose the use of electric vehicles (EVs the resilience of the microgrid, by utilizing the locally available renewable energy options, exploiting

  9. Texas - PUC Substantive Rule 25.174 - Electric Service Providers...

    Open Energy Info (EERE)

    Rule 25.174 - Electric Service Providers-Renewable Energy Resources and Use of Natural Gas Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal...

  10. Market and Policy Barriers for Demand Response Providing Ancillary Services

    Office of Energy Efficiency and Renewable Energy (EERE)

    In this study, we attempt to provide a comprehensive examination of various market and policy barriers to demand response providing ancillary services in both ISO/RTO and non-ISO/RTO regions, especially at the program provider level. It is useful to classify barriers in order to create a holistic understanding and identify parties that could be responsible for their removal. This study develops a typology of barriers focusing on smaller customers that must rely on a program provider (i.e., electric investor owned utility or IOU, ARC) to create an aggregated DR resource in order to bring ancillary services to the balancing authority. The barriers were identified through examinations of regulatory structures, market environments, and product offerings; and discussions with industry stakeholders and regulators.

  11. Providing Configuration Management Support in Software Engineering Environments

    E-Print Network [OSTI]

    Han, Jun

    Providing Configuration Management Support in Software Engineering Environments Jun Han Peninsula development project. A software engineering environment should not only pro- vide support for software products and software processes in general, but also pay attention to high level software engineering

  12. System Provides Clear Brain Scans of Awake, Unrestrained Mice...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    System Provides Clear Brain Scans of Awake, Unrestrained Mice dynamic imaging of mice Three markers attached to the head of a mouse enable the AwakeSPECT system to obtain detailed,...

  13. Enzyme Structure Provides Insights into Cancer and Aging

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Enzyme Structure Provides Insights into Cancer and Aging Print XPD helicase is an enzyme that unwinds the DNA double helix; it is one component of an essential repair mechanism...

  14. NREL's Building-Integrated Supercomputer Provides Heating and...

    Broader source: Energy.gov (indexed) [DOE]

    NREL teamed with Hewlett-Packard (HP) and Intel to develop the innovative warm-water, liquid-cooled Peregrine supercomputer, which not only operates efficiently but also provides...

  15. Higher Education Review (Plus) A handbook for alternative providers undergoing

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    (Plus) has two components. The first component is a check on financial sustainability, managementHigher Education Review (Plus) A handbook for alternative providers undergoing review in 2014).................................. 49 Annex 6: Appointment, training and management of reviewers

  16. 2012 APS-DPP Plasma Science Expo, Providence, RI | Princeton...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    APS-DPP Plasma Science Expo, Providence, RI View larger image IMG 1847 View larger image IMG 1598 View larger image IMG 1608 View larger image IMG 1609 View larger image IMG 1614...

  17. Texas - PUC Substantive Rule 25.5 - Electric Service Providers...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Legal Document- RegulationRegulation: Texas - PUC Substantive Rule 25.5 - Electric Service Providers-General ProvisionsLegal...

  18. Texas - PUC Substantive Rule 25.83 - Electric Service Providers...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Legal Document- RegulationRegulation: Texas - PUC Substantive Rule 25.83 - Electric Service Providers-Records, Reports, and other...

  19. Gregory H. Friedman: Provided for The Committee on Oversight...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Committee on Oversight and Government Reform U.S. House of Representatives Gregory H. Friedman: Provided for The Committee on Oversight and Government Reform U.S. House of...

  20. Paducah Package Steam Boilers to Provide Efficiency, Environmental...

    Energy Savers [EERE]

    and operates to provide steam on demand. The boilers are most efficient when they run at full capacity. When a boiler is turned down, the efficiency drops. To maximize...

  1. Centrifugal microdevices Chip-based analysis systems provide for

    E-Print Network [OSTI]

    Rogers, John A.

    Centrifugal microdevices Chip-based analysis systems provide for efficiency gains with respect the potential applications of such instruments. Centrifugation is a well- established sample pre or macromolecules of differing sizes in suspension. Macroscale centrifuges typically generate high centrifugal

  2. I. Purpose

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Year 2014 Omnibus Appropriations bill, however, includes 3,600,000 for conventional hydropower under section 242 of EPAct 2005. 1 Section 242 of EPAct 2005 (42 U.S.C. 15881)...

  3. I. Purpose

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Public Law 109-58) Congress established a new program to support the expansion of hydropower energy development at existing dams and impoundments through an incentive payment...

  4. I. Purpose

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    operator of qualified hydroelectric facilities for electric energy generated and sold from a qualified hydroelectric facility for a specified 10-year period. (See 42 U.S.C. 15881)...

  5. I. Purpose

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i nA Guide to TappingWORKof71 Hydrogen and Fuel Cells Successone of6'operator of

  6. I. Purpose

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i nA Guide to TappingWORKof71 Hydrogen and Fuel Cells Successone of6'operator

  7. I. Purpose

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i nA Guide to TappingWORKof71 Hydrogen and Fuel Cells Successone

  8. A Summary of Taxonomies of Digital System Failure Modes Provided by the DigRel Task Group

    SciTech Connect (OSTI)

    Chu T. L.; Yue M.; Postma, W.

    2012-06-25

    Recently, the CSNI directed WGRisk to set up a task group called DIGREL to initiate a new task on developing a taxonomy of failure modes of digital components for the purposes of PSA. It is an important step towards standardized digital I&C reliability assessment techniques for PSA. The objective of this paper is to provide a comparison of the failure mode taxonomies provided by the participants. The failure modes are classified in terms of their levels of detail. Software and hardware failure modes are discussed separately.

  9. Transient Pulse Formation in Jasmonate Signaling Pathway

    E-Print Network [OSTI]

    Subhasis Banerjee; Indrani Bose

    2010-03-03

    The jasmonate (JA) signaling pathway in plants is activated as defense response to a number of stresses like attacks by pests or pathogens and wounding by animals. Some recent experiments provide significant new knowledge on the molecular detail and connectivity of the pathway. The pathway has two major components in the form of feedback loops, one negative and the other positive. We construct a minimal mathematical model, incorporating the feedback loops, to study the dynamics of the JA signaling pathway. The model exhibits transient gene expression activity in the form of JA pulses in agreement with experimental observations. The dependence of the pulse amplitude, duration and peak time on the key parameters of the model is determined computationally. The deterministic and stochastic aspects of the pathway dynamics are investigated using both the full mathematical model as well as a reduced version of it. We also compare the mechanism of pulse formation with the known mechanisms of pulse generation in some bacterial and viral systems.

  10. Radio Triggered Star Formation in Cooling Flows

    E-Print Network [OSTI]

    B. R. McNamara

    1999-11-08

    The giant galaxies located at the centers of cluster cooling flows are frequently sites of vigorous star formation. In some instances, star formation appears to have been triggered by the galaxy's radio source. The colors and spectral indices of the young populations are generally consistent with short duration bursts or continuous star formation for durations much less than 1 Gyr, which is less than the presumed ages of cooling flows. The star formation properties are inconsistent with fueling by a continuously accreting cooling flow, although the prevalence of star formation is consistent with repeated bursts and periodic refueling. Star formation may be fueled, in some cases, by cold material stripped from neighboring cluster galaxies.

  11. On Iron Enrichment, Star Formation, and Type Ia Supernovae in Galaxy Clusters

    E-Print Network [OSTI]

    Michael Loewenstein

    2006-05-04

    The nature of star formation and Type Ia supernovae (SNIa) in galaxies in the field and in rich galaxy clusters are contrasted by juxtaposing the build-up of heavy metals in the universe inferred from observed star formation and supernovae rate histories with data on the evolution of Fe abundances in the intracluster medium (ICM). Models for the chemical evolution of Fe in these environments are constructed, subject to observational constraints, for this purpose. While models with a mean delay for SNIa of 3 Gyr and standard initial mass function (IMF) are consistent with observations in the field, cluster Fe enrichment immediately tracks a rapid, top-heavy phase of star formation -- although transport of Fe into the ICM may be more prolonged and star formation likely continues to redshifts formation mode. Star formation is >3 times more efficient in rich clusters than in the field, mitigating the overcooling problem in numerical cluster simulations. Both the fraction of baryons cycled through stars, and the fraction of the total present-day stellar mass in the form of stellar remnants, are substantially greater in clusters than in the field.

  12. Time sequenced heating of multiple layers in a hydrocarbon containing formation

    DOE Patents [OSTI]

    Goldberg, Bernard (Houston, TX); Hale, Arthur Herman (Houston, TX); Miller, David Scott (Katy, TX); Vinegar, Harold J. (Bellaire, TX)

    2009-12-22

    A method for treating a hydrocarbon containing formation may include providing heat to a first hydrocarbon layer in the formation from a first heater located in an opening in the formation. The opening and the first heater may have a horizontal or inclined portion located in the first hydrocarbon layer and at least one connecting portion extending between the horizontal or inclined portion and the surface. Isolation material is placed in the opening such that the isolation material partially isolates the layer in which the horizontal or inclined portion of the first heater is located. An additional horizontal or inclined opening portion that extends from at least one of the connecting portions of the opening is formed in a second hydrocarbon layer. A second heater to provide heat the second hydrocarbon formation is placed in the additional substantially horizontal opening portion.

  13. EXPERIMENTAL BUBBLE FORMATION IN A LARGE SCALE SYSTEM FOR NEWTONIAN AND NONNEWTONIAN FLUIDS

    SciTech Connect (OSTI)

    Leishear, R; Michael Restivo, M

    2008-06-26

    The complexities of bubble formation in liquids increase as the system size increases, and a photographic study is presented here to provide some insight into the dynamics of bubble formation for large systems. Air was injected at the bottom of a 28 feet tall by 30 inch diameter column. Different fluids were subjected to different air flow rates at different fluid depths. The fluids were water and non-Newtonian, Bingham plastic fluids, which have yield stresses requiring an applied force to initiate movement, or shearing, of the fluid. Tests showed that bubble formation was significantly different in the two types of fluids. In water, a field of bubbles was formed, which consisted of numerous, distributed, 1/4 to 3/8 inch diameter bubbles. In the Bingham fluid, large bubbles of 6 to 12 inches in diameter were formed, which depended on the air flow rate. This paper provides comprehensive photographic results related to bubble formation in these fluids.

  14. From Motor Babbling to Purposive Actions: Emerging Self-exploration in a Dynamical

    E-Print Network [OSTI]

    Der, Ralf

    From Motor Babbling to Purposive Actions: Emerging Self-exploration in a Dynamical Systems Approach­421, 2006. c Springer-Verlag Berlin Heidelberg 2006 #12;From Motor Babbling to Purposive Actions 407 role for human motor control, cf. [17] as an example. In the engineering sense the world model

  15. The Construction and Maintenance Plan for a Grand Banks Multi-Purpose Pipeline

    E-Print Network [OSTI]

    Bruneau, Steve

    The Construction and Maintenance Plan for a Grand Banks Multi-Purpose Pipeline D.W. (Don) Wilson, Director, North Atlantic Pipeline Partners, L.P. NOIA 2000 Conference June, 2000 #12;Grand Banks Multi-Purpose Pipeline Route January 2000 Grand Banks of Newfoundland Newfoundland Come by Chance St. John's Argentia 50o

  16. Floating insulated conductors for heating subsurface formations

    DOE Patents [OSTI]

    Burns, David; Goodwin, Charles R.

    2014-07-29

    A heating system for a subsurface formation includes a conduit located in a first opening in the subsurface formation. Three electrical conductors are located in the conduit. A return conductor is located inside the conduit. The return conductor is electrically coupled to the ends of the electrical conductors distal from the surface of the formation. Insulation is located inside the conduit. The insulation electrically insulates the three electrical conductors, the return conductor, and the conduit from each other.

  17. New Particle Formation Study Final Campaign Report

    SciTech Connect (OSTI)

    Smith, JN; McMurry, PH

    2015-01-01

    The scientific foci of the New Particle Formation Study were the formation and evolution of atmospheric aerosols and the impacts of newly formed particles on cloud processes. Specifically, we planned to: (1) to identify the species and mechanisms responsible for the initial steps of new particle formation, i.e., the formation of thermodynamically stable clusters; (2) investigate the role of acid-base chemistry in new particle growth through measurements of ammonia and amines as well as organic and inorganic acids in both atmospheric nanoparticles and the gas phase; (3) investigate the contribution of other surface area or volume-controlled processes to nanoparticle formation and growth; (4) create a comprehensive dataset related to new particle formation and growth that can be used as input for our own thermodynamic models as well as the modeling efforts by our Department of Energy (DOE) Aerosol Life Cycle working group collaborators; (5) characterize the increase of the number and activity of cloud condensation nuclei (CCN) due to particle formation and growth; (6) determine the regional extent of new particle formation to address the role that atmospheric transport plays in determining the impacts, if any, of new particle formation on cloud number and properties.

  18. Hydrogen Adsorption Induces Interlayer Carbon Bond Formation...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hydrogen Adsorption Induces Interlayer Carbon Bond Formation in Supported Few-Layer Graphene Friday, February 28, 2014 Among the allotropes of carbon, diamond has some of the most...

  19. Heating tar sands formations to visbreaking temperatures

    DOE Patents [OSTI]

    Karanikas, John Michael (Houston, TX); Colmenares, Tulio Rafael (Houston, TX); Zhang, Etuan (Houston, TX); Marino, Marian (Houston, TX); Roes, Augustinus Wilhelmus Maria (Houston, TX); Ryan, Robert Charles (Houston, TX); Beer, Gary Lee (Houston, TX); Dombrowski, Robert James (Houston, TX); Jaiswal, Namit (Houston, TX)

    2009-12-22

    Methods for treating a tar sands formation are described herein. Methods may include heating at least a section of a hydrocarbon layer in the formation from a plurality of heaters located in the formation. The heat may be controlled so that at least a majority of the section reaches an average temperature of between 200.degree. C. and 240.degree. C., which results in visbreaking of at least some hydrocarbons in the section. At least some visbroken hydrocarbon fluids may be produced from the formation.

  20. Standard Format and Content for Emergency Plans

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-08-21

    This volume addresses recommended emergency plan format and content for Operational Emergency Base Programs and Operational Emergency Hazardous Material Programs. Canceled by DOE G 151.1-3.

  1. Asymptotic behavior of dynamical variables and naked singularity formation in spherically symmetric gravitational collapse

    SciTech Connect (OSTI)

    Kawakami, Hayato; Mitsuda, Eiji; Nambu, Yasusada; Tomimatsu, Akira

    2009-07-15

    In considering the gravitational collapse of matter, it is an important problem to clarify what kind of conditions leads to the formation of naked singularity. For this purpose, we apply the 1+3 orthonormal frame formalism introduced by Uggla et al. to the spherically symmetric gravitational collapse of a perfect fluid. This formalism allows us to construct an autonomous system of evolution and constraint equations for scale-invariant dynamical variables normalized by the volume expansion rate of the timelike orthonormal frame vector. We investigate the asymptotic evolution of such dynamical variables towards the formation of a central singularity and present a conjecture that the steep spatial gradient for the normalized density function is a characteristic of the naked singularity formation.

  2. Method for providing uranium with a protective copper coating

    DOE Patents [OSTI]

    Waldrop, Forrest B. (Powell, TN); Jones, Edward (Knoxville, TN)

    1981-01-01

    The present invention is directed to a method for providing uranium metal with a protective coating of copper. Uranium metal is subjected to a conventional cleaning operation wherein oxides and other surface contaminants are removed, followed by etching and pickling operations. The copper coating is provided by first electrodepositing a thin and relatively porous flash layer of copper on the uranium in a copper cyanide bath. The resulting copper-layered article is then heated in an air or inert atmosphere to volatilize and drive off the volatile material underlying the copper flash layer. After the heating step an adherent and essentially non-porous layer of copper is electro-deposited on the flash layer of copper to provide an adherent, multi-layer copper coating which is essentially impervious to corrosion by most gases.

  3. Diffusive dynamics of contact formation in disordered polypeptides

    E-Print Network [OSTI]

    Gul Zerze; Jeetain Mittal; Robert B. Best

    2015-07-09

    Experiments measuring contact formation between a probe and quencher in disordered chains provide information on the fundamental dynamical timescales relevant to protein folding, but their interpretation usually relies on simplified one-dimensional (1D) diffusion models. Here, we use all-atom molecular simulations to capture both the time-scales of contact formation, as well as the scaling with the length of the peptide for tryptophan triplet quenching experiments. Capturing the experimental quenching times depends on the water viscosity, but more importantly on the configurational space explored by the chain. We also show that very similar results are obtained from Szabo-Schulten-Schulten theory applied to a 1D diffusion model derived from the simulations, supporting the validity of such models. However, we also find a significant reduction in diffusivity at small separations, those which are most important in determining the quenching rate.

  4. Diffusive dynamics of contact formation in disordered polypeptides

    E-Print Network [OSTI]

    Zerze, Gul; Best, Robert B

    2015-01-01

    Experiments measuring contact formation between a probe and quencher in disordered chains provide information on the fundamental dynamical timescales relevant to protein folding, but their interpretation usually relies on simplified one-dimensional (1D) diffusion models. Here, we use all-atom molecular simulations to capture both the time-scales of contact formation, as well as the scaling with the length of the peptide for tryptophan triplet quenching experiments. Capturing the experimental quenching times depends on the water viscosity, but more importantly on the configurational space explored by the chain. We also show that very similar results are obtained from Szabo-Schulten-Schulten theory applied to a 1D diffusion model derived from the simulations, supporting the validity of such models. However, we also find a significant reduction in diffusivity at small separations, those which are most important in determining the quenching rate.

  5. Soliton communication lines based on spectrally efficient modulation formats

    SciTech Connect (OSTI)

    Yushko, O V; Redyuk, A A

    2014-06-30

    We report the results of mathematical modelling of optical-signal propagation in soliton fibre-optic communication lines (FOCLs) based on spectrally efficient signal modulation formats. We have studied the influence of spontaneous emission noise, nonlinear distortions and FOCL length on the data transmission quality. We have compared the characteristics of a received optical signal for soliton and conventional dispersion compensating FOCLs. It is shown that in the presence of strong nonlinearity long-haul soliton FOCLs provide a higher data transmission performance, as well as allow higher order modulation formats to be used as compared to conventional communication lines. In the context of a coherent data transmission, soliton FOCLs allow the use of phase modulation with many levels, thereby increasing the spectral efficiency of the communication line. (optical communication lines)

  6. Ranging methods for developing wellbores in subsurface formations

    DOE Patents [OSTI]

    MacDonald, Duncan (Houston, TX)

    2011-09-06

    A method for forming two or more wellbores in a subsurface formation includes forming a first wellbore in the formation. A second wellbore is directionally drilled in a selected relationship relative to the first wellbore. At least one magnetic field is provided in the second wellbore using one or more magnets in the second wellbore located on a drilling string used to drill the second wellbore. At least one magnetic field is sensed in the first wellbore using at least two sensors in the first wellbore as the magnetic field passes by the at least two sensors while the second wellbore is being drilled. A position of the second wellbore is continuously assessed relative to the first wellbore using the sensed magnetic field. The direction of drilling of the second wellbore is adjusted so that the second wellbore remains in the selected relationship relative to the first wellbore.

  7. Format requirements of thermal neutron scattering data in a nuclear data format to succeed the ENDF format

    SciTech Connect (OSTI)

    Brown, D. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2014-03-31

    In November 2012, the Working Party on Evaluation Cooperation Subgroup 38 (WPEC-SG38) began with the task of developing a nuclear data format and supporting infrastructure to replace the now nearly 50 year old ENDF format. The first step in this process is to develop requirements for the new format and infrastructure. In this talk, I will review the status of ENDF's Thermal Scattering Law (TSL) formats as well as support for this data in the GND format (from which the new format is expected to evolve). Finally, I hope to begin a dialog with members of the thermal neutron scattering community so that their data needs can be accurately and easily accommodated by the new format and tools, as captured by the requirements document. During this discussion, we must keep in mind that the new tools and format must; Support what is in existing data files; Support new things we want to put in data files; and Be flexible enough for us to adapt it to future unanticipated challenges.

  8. Chaos in Terrestrial Planet Formation

    E-Print Network [OSTI]

    Volker Hoffmann; Simon L. Grimm; Ben Moore; Joachim Stadel

    2015-08-04

    Terrestrial planets are thought to be the result of a vast number of gravitational interactions and collisions between smaller bodies. We use numerical simulations to show that practically identical initial conditions result in a wide array of final planetary configurations. This highly chaotic behaviour questions the predictability of different scenarios for the formation and evolution of our solar system and planetary systems in general. However, multiple realisations of the same initial conditions can be used to predict certain global statistics. We present two sets of numerical experiments that quantify this behaviour. Firstly, we demonstrate that simulations with slightly displaced particles are completely divergent after ~500 years, irrespective of initial displacement, particle number, and code accuracy. If a single planetesimal is moved by less than one millimetre, then a different set of planets results -- this timescale for chaotic divergence decreases with increasing particle number. Secondly, we show final planetary configurations of initially similar simulations with and without giant planets after evolving them for ~148 Myr. We find that the same simulations including giant planets tend to generate higher mass planets at lower semi-major axes than simulations without gas giants. This prediction can be tested with forthcoming observational programs. By extracting outliers in the observations, we cautiously predict that Kepler-10, Kepler-9, 61 Vir, HD 134060, and HD 51608 may host as yet undetected giant planets.

  9. Turfgrass: Field to provide lab to research new technologies 

    E-Print Network [OSTI]

    Wythe, Kathy

    2011-01-01

    systems. Project members will use information gained from this project to develop educational materials for that area?s home consumers, he said. Field to provide lab to research new technologies 14 tx H2O Summer 2011 Turfgrass Continued (Left) Dr... will enter the industry with ?rst-hand experience in learning how to solve complex issues with new and innovative technologies.? Sco?s is providing ????,??? over ?ve years to create the research facility through the Texas A&M Foundation. A separate...

  10. Providing proof: Desalination technology tested for efficiency, economics 

    E-Print Network [OSTI]

    Bentz, Laura

    2012-01-01

    stream_source_info Providing proof_desalination.pdf.txt stream_content_type text/plain stream_size 11200 Content-Encoding ISO-8859-1 stream_name Providing proof_desalination.pdf.txt Content-Type text/plain; charset=ISO-8859...-1 12 tx H2O Fall 2012 ] Story by Laura Bentz A revolutionary desalination technology, invented by a Texas A&M University professor, could give Texas water suppliers a new way to purify water. ?ough not yet ready for widescale production...

  11. Provide Assistance to Improve Water Quality in Hood County 

    E-Print Network [OSTI]

    Lesikar, Bruce; Mechell, Justin; Clayton, Brent; Gerlich, Ryan

    2010-01-01

    water for industrial use, including cooling water for a natural gas?fired steam electric power plant and the Comanche Peak nuclear power plant. It is also a recreation haven for local water enthusiasts. Declining water quality in Lake Granbury has...-7442-9-486 INTRODUCTION The overall goal for this project was to provide a mechanism to educate local stakeholders about water quality issues that affect Lake Granbury. This project provided an assessment of existing and potential water quality threats related to on...

  12. Recent legislative changes affect the way we teach and provide service at Western. The Accessibility for Ontarians with Disabilities Act (AODA) has new requirements that came into effect as of January 1, 2014,

    E-Print Network [OSTI]

    Lennard, William N.

    . Accessible Educational and Training Resources Under the Information and Communication Standard, we are required to provide educational or training resources in an accessible format that takes into account records. Purchase educational materials that include an accessible or conversion-ready electronic format

  13. On spontaneous formation of current sheets: Untwisted magnetic fields

    SciTech Connect (OSTI)

    Bhattacharyya, R. [Udaipur Solar Observatory, Physical Research Laboratory, Dewali, Bari Road, Udaipur-313001 (India); National Center for Atmospheric Research, P.O. Box 3000, Boulder, Colorado 80307 (United States); Low, B. C.; Smolarkiewicz, P. K. [National Center for Atmospheric Research, P.O. Box 3000, Boulder, Colorado 80307 (United States)

    2010-11-15

    This is a study of the spontaneous formation of electric current sheets in an incompressible viscous fluid with perfect electrical conductivity, governed by the magnetohydrodynamic Navier-Stokes equations. Numerical solutions to two initial value problems are presented for a three-dimensional, periodic, untwisted magnetic field evolving, with no change in magnetic topology under the frozen-in condition and at characteristic fluid Reynolds numbers of the order of 500, from a nonequilibrium initial state with the fluid at rest. The evolution converts magnetic free energy into kinetic energy to be all dissipated away by viscosity so that the field settles into a minimum-energy, static equilibrium. The solutions demonstrate that, as a consequence of the frozen-in condition, current sheets must form during the evolution despite the geometric simplicity of the prescribed initial fields. In addition to the current sheets associated with magnetic neutral points and field reversal layers, other sheets not associated with such magnetic features are also in evidence. These current sheets form on magnetic flux surfaces. This property is used to achieve a high degree of the frozen-in condition in the simulations, by describing the magnetic field entirely in terms of the advection of its flux surfaces and integrating the resulting governing equations with a customized version of a general-purpose high-resolution (viz., nonoscillatory) hydrodynamical simulation code EULAG [J. M. Prusa et al., Comput. Fluids 37, 1193 (2008)]. Incompressibility imposes the additional global constraint that the flux surfaces must evolve with no change in the spatial volumes they enclose. In this approach, current sheet formation is demonstrated graphically by the progressive pressing together of suitably selected flux surfaces until their separation has diminished below the minimal resolved distance on a fixed grid. The frozen-in condition then fails in the simulation as the field reconnects through an effecting numerical resistivity. The principal results are related to the Parker theory of current-sheet formation and dissipation in the solar corona.

  14. Occupational therapy is a healthcare profession that provides services to

    E-Print Network [OSTI]

    Sibille, Etienne

    Occupational therapy is a healthcare profession that provides services to individuals of all ages of occupational therapy services, and contributor to the profession. The occupational therapist practitioner and healthcare, participates in clinical research, and advocates appropriately for clients and the profession

  15. Form 1410 FR.13 Instructions Internal Service Providers: Registration

    E-Print Network [OSTI]

    new customers, anticipated large reduction in customers, new products/services, and/or reduced Service Providers (ISPs) are required to complete an ISP Registration form when initially registering $100,000 annually), GC-Recharge Center > $100k (sponsored activity to $100,000 annually), or Cost

  16. Introduction This directory is intended to provide information about compost

    E-Print Network [OSTI]

    Liskiewicz, Maciej

    Introduction This directory is intended to provide information about compost producers herein. If you are a compost supplier in the mid-Atlantic region who would like to be included@vt.edu or 540-231-9739. Compost Producers and Suppliers Name and address Phone (P) [cell (CP), home (HP)], fax

  17. Preparing Turkey Safely Turkey provides protein along with other key

    E-Print Network [OSTI]

    Preparing Turkey Safely Nutrition Turkey provides protein along with other key nutrients. A serving is 3 ounces cooked poultry (about the size of a deck of cards). One serving of roasted, skinless turkey protein; iron--8% daily value Right Size Turkey Use this chart as a helpful guide: Whole bird ­ 1 pound

  18. Solar-Assisted Technology Provides Heat for California Industries

    E-Print Network [OSTI]

    Solar-Assisted Technology Provides Heat for California Industries Industrial/Agriculture/Water End 2011 The Issue Solar thermal technology focuses the Sun's rays to heat water, and is a promising renewable resource for California's industrial sector. Commercially available solar water heating

  19. Managing Routing Disruptions in Internet Service Provider Networks

    E-Print Network [OSTI]

    Rexford, Jennifer

    games, and commercial transactions. This new range of applications cannot tolerate poor network the impact of routing changes in their network. I. INTRODUCTION As the Internet becomes an ever more critical increasing pressure to provide good, predictable performance to a wide range of applications. Unfortunately

  20. Bacteria Marinobacter aquaeolei. Community Living. Microbes living in coral provide

    E-Print Network [OSTI]

    Bacteria Marinobacter aquaeolei. Community Living. Microbes living in coral provide nutrients Cleaning up. Bacteria are being tested for use as cleaning agents of toxic chemicals and pollutants in our.The big red and green dots (numbering about 1,000) are bacteria, and the very small background dots (about

  1. Photo Requirements Please provide an electronic photo that meets these

    E-Print Network [OSTI]

    Chapman, Michael S.

    Photo Requirements Please provide an electronic photo that meets these requirements. The photo must/8 inches (between 25 and 35 mm) from the bottom of the chin to the top of the head. See the photo · Be taken in clothing that you normally wear on a daily basis: - Uniforms should not be worn in your photo

  2. Submitted to manuscript (Please, provide the manuscript number!)

    E-Print Network [OSTI]

    Ziya, Serhan

    with Unknown Types Zhankun Sun, Nilay Tanik Argon, Serhan Ziya Department of Statistics and Operations Research of a job may not be available immediately, but can be revealed through some preliminary investigation. While investigation provides useful information, it also delays the provision of services. Therefore

  3. PROVIDING COMMUNITY AND COLLABORATION SERVICES TO MMOG PLAYERS*

    E-Print Network [OSTI]

    and improve the community activities among their members. The Community Network Game (CNG) project has focused adapted to the needs of MMOG players. They are provided by the so-called CNG Server and have been The Community Network Game (CNG) [5] is a research and innovation project funded by the European Commission

  4. Method for providing improved solid fuels from agglomerated subbituminous coal

    DOE Patents [OSTI]

    Janiak, Jerzy S. (Edmonton, CA); Turak, Ali A. (Edmonton, CA); Pawlak, Wanda (Edmonton, CA); Ignasiak, Boleslaw L. (Edmonton, CA)

    1989-01-01

    A method is provided for separating agglomerated subbituminous coal and the heavy bridging liquid used to form the agglomerates. The separation is performed by contacting the agglomerates with inert gas or steam at a temperature in the range of 250.degree. to 350.degree. C. at substantially atmospheric pressure.

  5. 1 Statistics Statistics plays an important role throughout society, providing

    E-Print Network [OSTI]

    Vertes, Akos

    1 Statistics STATISTICS Statistics plays an important role throughout society, providing data. They also explore how those skills can be applied to develop new initiatives. Statistics is one. UNDERGRADUATE Bachelor's program · Bachelor of Science with a major in statistics (http:// bulletin.gwu.edu/arts-sciences/statistics

  6. PROJECT GOALS To determine whether any ANU properties provide

    E-Print Network [OSTI]

    and likely outcomes for carbon sequestration planting. Analysis of land tenure, legal and environmental conditions relating to potential carbon sequestration sites. Two sites identified as providing meaningful opportunities for carbon sequestration. These two sites could potentially capture enough carbon to offset

  7. Development of a system to provide diagnostics-while-drilling.

    SciTech Connect (OSTI)

    Wise, Jack LeRoy; Jacobson, Ronald David; Finger, John Travis; Mansure, Arthur James; Knudsen, Steven Dell

    2003-06-01

    This report describes development of a system that provides high-speed, real-time downhole data while drilling. Background of the project, its benefits, major technical challenges, test planning, and test results are covered by relatively brief descriptions in the body of the report, with some topics presented in more detail in the attached appendices.

  8. Ecosystem services provided by palms in SE Asia

    E-Print Network [OSTI]

    Schierup, Mikkel Heide

    important in forest ecosystems and include some 600 species in SEA. Rural communities depend on palms provided by ecosystems and research into the value of these resources should: - Include rural communities of rural communities' harvest of palm products - Evaluate the potential of developing new palm products

  9. Admission Control Framework to Provide Guaranteed Delay in Errorprone Wireless

    E-Print Network [OSTI]

    Sarkar, Saswati

    1 Admission Control Framework to Provide Guaranteed Delay in Error­prone Wireless Channel Prasanna Chaporkar and Saswati Sarkar Abstract We consider a wireless system in which sessions traverse different­prone wireless system. By ``general'' we mean that the scheduling policies from a large class can be plugged

  10. Bimetallic Cluster Provides a Higher Activity Electrocatalyst for Methanol Oxidation*

    E-Print Network [OSTI]

    Weidner, John W.

    Bimetallic Cluster Provides a Higher Activity Electrocatalyst for Methanol Oxidation* Brenda L:Ru nanoparticles on carbon (PtRu/C) for use as an electrocatalyst for methanol oxidation. This bimetallic carbonyl support particles. Cyclic voltammo- grams of methanol oxidation from the two catalysts showed

  11. Providing vital services for our nation's ocean resources

    E-Print Network [OSTI]

    of the greatest threats to marine life. Habitat such as wetlands and coral reefs provide important feeding shellfish culture, alternative feeds, and equipment. #12;Protecting Marine Mammals and Endangered Species Protected marine life such as whales, sea turtles, corals, and salmon serve as sentinels of the sea

  12. 12691618. Fay Ajzenberg-Selove Undergraduate Scholarship provides encouragement for

    E-Print Network [OSTI]

    Yavuz, Deniz

    - Physics majors in summer research experiences. (Undergraduate) 12692082. Cornelius P. & Cynthia C. Browne to faculty. 12694069. Friends of the Physics Ingersoll Museum currently provides funding for display upgrades graduate students in the Department of Physics. 12692082. Cornelius P. and Cynthia C. Browne Fellowship

  13. National Wind Tecnology Center Provides Dual Axis Resonant Blade Testing

    ScienceCinema (OSTI)

    Felker, Fort

    2014-06-10

    NREL's Structural Testing Laboratory at the National Wind Technology Center (NWTC) provides experimental laboratories, computer facilities for analytical work, space for assembling components and turbines for atmospheric testing as well as office space for industry researchers. Fort Felker, center director at the NWTC, discusses NREL's state-of-the-art structural testing capabilities and shows a flapwise and edgewise blade test in progress.

  14. Providing Green SLAs in High Performance Computing Clouds

    E-Print Network [OSTI]

    the job but violates the Green SLA. We then propose (1) a power distribution and control infrastructure for scheduling jobs and power sources that maximizes provider profits while respecting Green SLAs, and (3) two of Green House Data's datacenters are 100% powered by renewable (wind) energy, a third (equipped with solar

  15. Supplanting ecosystem services provided by scavengers raises greenhouse gas

    E-Print Network [OSTI]

    Richner, Heinz

    Supplanting ecosystem services provided by scavengers raises greenhouse gas emissions Zebensui to human-induced increments in atmospheric concentrations of greenhouse gases (GHG) is one of the most concentrations of some gases such as carbon dioxide, methane or nitrous oxide (globally called greenhouse gases

  16. About the Stormwater Education Program provides stormwater education for

    E-Print Network [OSTI]

    Minnesota, University of

    About the Stormwater Education Program provides stormwater education for professionals with about 500 participants (in-person) per year. Stormwater U helps Minnesota communities (MS4s) in meeting achieve clean water goals. The program participants benefit by gaining needed stormwater knowledge

  17. CLIMATE STUDY Phase II: MU Student Services Providers Survey

    E-Print Network [OSTI]

    Taylor, Jerry

    MU CAMPUS CLIMATE STUDY VOLUME 2 Phase II: MU Student Services Providers Survey Phase III: MU CAMPUS CLIMATE STUDY: PHASES II ­ IV Over the past three years, members of the University of Missouri-Columbia (MU) have participated in the MU Campus Climate Study for Underrepresented Groups conducted by a team

  18. A Thomistic account of divine providence and human freedom 

    E-Print Network [OSTI]

    Lim, Joung Bin

    2007-04-25

    are unsatisfactory in that they too easily give up some of the important doctrines concerning God and humans. In Chapter III, I develop a Thomistic account of divine providence and human freedom. The Thomistic theory, I argue, well preserves traditional doctrines...

  19. National Wind Tecnology Center Provides Dual Axis Resonant Blade Testing

    SciTech Connect (OSTI)

    Felker, Fort

    2013-11-13

    NREL's Structural Testing Laboratory at the National Wind Technology Center (NWTC) provides experimental laboratories, computer facilities for analytical work, space for assembling components and turbines for atmospheric testing as well as office space for industry researchers. Fort Felker, center director at the NWTC, discusses NREL's state-of-the-art structural testing capabilities and shows a flapwise and edgewise blade test in progress.

  20. Sequence and comparative analysis of the chicken genome provide unique

    E-Print Network [OSTI]

    Hardison, Ross C.

    Sequence and comparative analysis of the chicken genome provide unique perspectives on vertebrate evolution International Chicken Genome Sequencing Consortium* *Lists of participants and affiliations appear ........................................................................................................................................................................................................................... We present here a draft genome sequence of the red jungle fowl, Gallus gallus. Because the chicken

  1. New Technology Provides Cost-Effective Emissions Control

    E-Print Network [OSTI]

    New Technology Provides Cost- Effective Emissions Control Solution for CHP Applications Renewable are the most cost-effective CHP technology less than three MW in size. With a cost effective) applications less than three megawatts (MW). Because they are relatively low cost and have high

  2. The Silver Tsunami Proposal Providing the Seniors of Carroll County

    E-Print Network [OSTI]

    Frantz, Kyle J.

    The Silver Tsunami Proposal Providing the Seniors of Carroll County with Personal Transportation for aging generations #12;Comparing Options The Silver Tsunami Proposal is: Cheaper than taxis More prevent the same collaboration. Silver Tsunami is acting as a mediating entity between various

  3. Demand Response Providing Ancillary A Comparison of Opportunities and

    E-Print Network [OSTI]

    LBNL-5958E Demand Response Providing Ancillary Services A Comparison of Opportunities Government or any agency thereof or The Regents of the University of California. #12;Demand Response System Reliability, Demand Response (DR), Electricity Markets, Smart Grid Abstract Interest in using

  4. The Ratio of Retrograde to Prograde Orbits: A Test for Kuiper Belt Binary Formation Theories

    E-Print Network [OSTI]

    Hilke E. Schlichting; Re'em Sari

    2008-07-03

    With the discovery of Kuiper Belt binaries that have wide separations and roughly equal masses new theories were proposed to explain their formation. Two formation scenarios were suggested by Goldreich and collaborators: In the first, dynamical friction that is generated by a sea of small bodies enables a transient binary to become bound ($L^2s$ mechanism); in the second, a transient binary gets bound by an encounter with a third body ($L^3$ mechanism). We show that these different binary formation scenarios leave their own unique signatures in the relative abundance of prograde to retrograde binary orbits. This signature is due to stable retrograde orbits that exist much further out in the Hill sphere than prograde orbits. It provides an excellent opportunity to distinguish between the different binary formation scenarios observationally. We predict that if binary formation proceeded while sub-Hill velocities prevailed, the vast majority of all comparable mass ratio binaries have retrograde orbits. This dominance of retrograde binary orbits is a result of binary formation via the $L^2s$ mechanism, or any other mechanism that dissipates energy in a smooth and gradual manner. For super-Hill velocities binary formation proceeds via the $L^3$ mechanism which produces a roughly equal number of prograde and retrograde binaries. These predictions assume that subsequent orbital evolution due to dynamical friction and dynamical stirring of the Kuiper belt did not alter the sense of the binary orbit after formation.

  5. Seismic facies and growth history of Miocene carbonate platforms, Wonocolo Formation, North Madura area, East Java Basin, Indonesia 

    E-Print Network [OSTI]

    Adhyaksawan, Rahadian

    2002-01-01

    The Miocene Wonocolo Formation in the North Madura area, East Java Basin, contains numerous isolated carbonate platforms that are broadly distributed across a ~3000 sq km area of the Indonesian back-arc region. The Wonocolo platforms provide...

  6. Use of growth factors and adhesive ligands to promote connective tissue progenitor colony formation from fresh marrow

    E-Print Network [OSTI]

    Marcantonio, Nicholas A. (Nicholas Alexander)

    2008-01-01

    The current gold standard for bone graft material is autologous bone, which provides mechanical support, possesses factors that promote bone formation, and contains connective tissue progenitors (CTPs), a heterogeneous ...

  7. Autonomous Helicopter Formation using Model Predictive Control

    E-Print Network [OSTI]

    Sastry, S. Shankar

    Autonomous Helicopter Formation using Model Predictive Control Hoam Chung and S. Shankar Sastry for teams of helicopters. However, the potential for accidents is greatly increased when helicopter teams to the problem of helicopter formations comprised of heterogenous vehicles. The disturbance attenuation property

  8. Methods for forming wellbores in heated formations

    DOE Patents [OSTI]

    Guimerans, Rosalvina Ramona; Mansure, Arthur James

    2012-09-25

    A method for forming a wellbore in a heated formation includes flowing liquid cooling fluid to a bottom hole assembly in a wellbore in a heated formation. At least a portion of the liquid cooling fluid is vaporized at or near a region to be cooled. Vaporizing the liquid cooling fluid absorbs heat from the region to be cooled.

  9. Robot Behavior Adaptation for Formation Maintenance

    E-Print Network [OSTI]

    López-Sánchez, Maite

    1 Robot Behavior Adaptation for Formation Maintenance Maite López-Sánchez maite@maia.ub.es WAI): ­1 or 2 reference robots to follow ­keeping fixed angle (formation property) ­and fixed distance d (separation distance) · related to robot visibility range, speed or reaction capabilities Basic behaviors I

  10. First Structure Formation and the First Stars

    E-Print Network [OSTI]

    Michael L. Norman; Tom Abel; Greg Bryan

    2000-05-11

    We discuss the results of recent 3D simulations of first structure formation in relationship to the formation of the first stars. On the basis of a new, high-resolution AMR simulation (spatial dynamic range = 30,000,000), we conclude that the first stars are likely to be massive.

  11. Estimation of the formation rates of polyatomic species of heavy metals in plutonium analyses using a multicollector ICP-MS with a desolvating nebulizer

    SciTech Connect (OSTI)

    Mitroshkov, Alexandre V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Olsen, Khris B. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Thomas, Linda M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-01-01

    The analyses of IAEA and environmental samples for Plutonium isotopic content are conducted normally at very low concentrations of Pu–usually in the range of part per trillion level and even more often at the parts per quadrillion level. To analyze such low concentrations, the interferences in the analytical solution must be reduced as much as possible. Polyatomic interferences (PIs), formed by the heavy metals (HMs) from Hf to Bi are known to create the problems for Pu isotopic analyses, because even the relatively high resolution of a modern multicollector ICP-MS is not enough to separate Pu isotopes from this PIs in most of the cases. Desolvating nebulizers (DSN) (e.g. APEX and AridusII) reduce significantly the formation of PIs compare to the use of wet plasma. The purpose of this work was to investigate the rate of formation of PIs, produced by HMs, when high resolution MC ICP-MS with desolvating nebulizer was used for Pu isotopic analyses and to estimate the influence of the metals present in the sample on the results of analyses. The NU Plasma HR Multicollector and AridusII desolvating nebulizer were used in this investigation. This investigation was done for all Pu isotopes normally analyzed by ICP-MS, including ²??Pu, with the exception of ²³?Pu, which most of the time can’t be analyzed by ICP-MS, because of the overwhelming presence of ²³?U in the solutions. The PI formation rates were determined and reported for all 12 HMs from Hf to Bi. Selected IAEA samples were scanned for the presence of HMs and the influence of HMs on the results of Pu isotopic analyses was evaluated. It was found that the implemented separation procedure provides sufficient separation of HM from Pu, although the effect of PIs on the measurement of low level isotopes like ²?¹Pu and ²?²Pu in some cases can still be observed.

  12. 1.6 Policy Development & Format Page 1 of 3 Policy Development & Format

    E-Print Network [OSTI]

    Hung, I-Kuai

    1.6 Policy Development & Format Page 1 of 3 Policy Development & Format Original Implementation: July 16, 2013 Last Revision: None A. POLICY FORMAT Each policy will have a title that is concise but descriptive. Each policy is indexed with a numeric indicator which indicates the position of the entry within

  13. Sequentially Triggered Star Formation in OB Associations

    E-Print Network [OSTI]

    Thomas Preibisch; Hans Zinnecker

    2006-10-27

    We discuss observational evidence for sequential and triggered star formation in OB associations. We first review the star formation process in the Scorpius-Centaurus OB association, the nearest OB association to the Sun, where several recent extensive studies have allowed us to reconstruct the star formation history in a rather detailed way. We then compare the observational results with those obtained for other OB associations and with recent models of rapid cloud and star formation in the turbulent interstellar medium. We conclude that the formation of whole OB subgroups (each consisting of several thousand stars) requires large-scale triggering mechanisms such as shocks from expanding wind and supernova driven superbubbles surrounding older subgroups. Other triggering mechanisms, like radiatively driven implosion of globules, also operate, but seem to be secondary processes, forming only small stellar groups rather than whole OB subgroups with thousands of stars.

  14. Maximizing Cloud Providers Revenues via Energy Aware Allocation Policies

    E-Print Network [OSTI]

    Mazzucco, Michele; Deters, Ralph

    2011-01-01

    Cloud providers, like Amazon, offer their data centers' computational and storage capacities for lease to paying customers. High electricity consumption, associated with running a data center, not only reflects on its carbon footprint, but also increases the costs of running the data center itself. This paper addresses the problem of maximizing the revenues of Cloud providers by trimming down their electricity costs. As a solution allocation policies which are based on the dynamic powering servers on and off are introduced and evaluated. The policies aim at satisfying the conflicting goals of maximizing the users' experience while minimizing the amount of consumed electricity. The results of numerical experiments and simulations are described, showing that the proposed scheme performs well under different traffic conditions.

  15. Williams Guest Wireless Williams College now provides free guest wifi access. This network access is provided for the express

    E-Print Network [OSTI]

    Aalberts, Daniel P.

    Williams Guest Wireless Williams College now provides free guest wifi access. This network network (nonsecure), some devices may not allow connections to an open wireless network. On Windows. 1 #12;Williams Guest Wireless (Continued) 2) A few seconds after your machine connects

  16. World`s developing regions provide spark for pipeline construction

    SciTech Connect (OSTI)

    Koen, A.D.; True, W.R.

    1996-02-05

    This paper reviews the proposed construction of oil and gas pipelines which are underway or proposed to be started in 1996. It breaks down the projects by region of the world, type of product to be carried, and diameter of pipeline. It also provides mileage for each category of pipeline. Major projects in each region are more thoroughly discussed giving details on construction expenditures, construction problems, and political issues.

  17. Providing protection: Agencies receive funding to repair, upgrade dams 

    E-Print Network [OSTI]

    Wythe, Kathy

    2009-01-01

    by Kathy Wythe tx H2O | pg. 26 Providing protection Agencies receive funding to repair, upgrade dams along with local partners, can apply for grant funds, he said. Construction of the dams began through four federal authorizations passed between... 1944 and 1981. Land rights were acquired from landowners, and local agencies constructed the dams with federal money from NRCS (formerly the Soil Conservation Service). Local sponsors?including cities, counties, local soil and water conservation...

  18. Commercial Building Loads Providing Ancillary Services in PJM

    SciTech Connect (OSTI)

    MacDonald, Jason; Kiliccote, Sila; Boch, Jim; Chen, Jonathan; Nawy, Robert

    2014-06-27

    The adoption of low carbon energy technologies such as variable renewable energy and electric vehicles, coupled with the efficacy of energy efficiency to reduce traditional base load has increased the uncertainty inherent in the net load shape. Handling this variability with slower, traditional resources leads to inefficient system dispatch, and in some cases may compromise reliability. Grid operators are looking to future energy technologies, such as automated demand response (DR), to provide capacity-based reliability services as the need for these services increase. While DR resources are expected to have the flexibility characteristics operators are looking for, demonstrations are necessary to build confidence in their capabilities. Additionally, building owners are uncertain of the monetary value and operational burden of providing these services. To address this, the present study demonstrates the ability of demand response resources providing two ancillary services in the PJM territory, synchronous reserve and regulation, using an OpenADR 2.0b signaling architecture. The loads under control include HVAC and lighting at a big box retail store and variable frequency fan loads. The study examines performance characteristics of the resource: the speed of response, communications latencies in the architecture, and accuracy of response. It also examines the frequency and duration of events and the value in the marketplace which can be used to examine if the opportunity is sufficient to entice building owners to participate.

  19. The Guided Improvement Algorithm for Exact, General-Purpose, Many-Objective Combinatorial Optimization

    E-Print Network [OSTI]

    Jackson, Daniel

    2009-07-03

    This paper presents a new general-purpose algorithm for exact solving of combinatorial many-objective optimization problems. We call this new algorithm the guided improvement algorithm. The algorithm is implemented on top ...

  20. Fourier Transform Methods of Deconvolving Scintigrams Using a General Purpose Digital Computer 

    E-Print Network [OSTI]

    Boardman, A. Keith

    1978-01-01

    The adaptation of a general purpose laboratory minicomputer for nuclear medicine imaging is described. Electronic interfaces have been designed and constructed to link nucleonic equipment to a PDP 12 computer. A computer ...

  1. What it means to be Christian: Kierkegaard's purpose as an author 

    E-Print Network [OSTI]

    Vaughn, Bradley Keith

    2003-01-01

    My purpose for this thesis is to understand and interpret the meaning and intent of Kierkegaard's authorship. Kierkegaard is emphatically concerned with making his reader aware of essential Christianity and what it means to be a Christian...

  2. Initial Assessment of U.S. Refineries for Purposes of Potential...

    Office of Scientific and Technical Information (OSTI)

    Initial Assessment of U.S. Refineries for Purposes of Potential Bio-Based Oil Insertions Citation Details In-Document Search Title: Initial Assessment of U.S. Refineries for...

  3. An Intranet and Internet based Information System for Administration and Information purposes*

    E-Print Network [OSTI]

    to enable asynchronous and synchronous cooperation, manipulation of information from heterogeneous sources1 An Intranet and Internet based Information System for Administration and Information purposes Panagiotis Computer Technology Institute, Kolokotroni 3, GR-26221, Patras, Greece Abstract This work presents

  4. Idaho IC 61-1701, Legislative Purposes and Findings for the Siting...

    Open Energy Info (EERE)

    Idaho IC 61-1701, Legislative Purposes and Findings for the Siting of Certain Electrical Transmission Facilities Jump to: navigation, search OpenEI Reference LibraryAdd to library...

  5. Formation of hollow nanocrystals through the nanoscale kirkendall effect

    SciTech Connect (OSTI)

    Yin, Yadong; Rioux, Robert M.; Erdonmez, Can K.; Hughes, Steven; Somorjai, Gabor A.; Alivisatos, A. Paul

    2004-03-11

    We demonstrate that hollow nanocrystals can be synthesized through a mechanism analogous to the Kirkendall Effect, in which pores form due to the difference in diffusion rates between two components in a diffusion couple. Cobalt nanocrystals are chosen as a primary example to show that their reaction in solution with oxygen, sulfur or selenium leads to the formation of hollow nanocrystals of the resulting oxide and chalcogenides. This process provides a general route to the synthesis of hollow nanostructures of large numbers of compounds. A simple extension of this process yields platinum-cobalt oxide yolk-shell nanostructures which may serve as nanoscale reactors in catalytic applications.

  6. A+M Collisional Databases in ALADDIN Format

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    ALADDIN (A Labelled Atomic Data Interface) is a database system developed in order to provide a standard and flexible format and interface for the exchange and management of atomic, molecular and plasma-material interaction data of interest to fusion research. As part of the Atomic and Molecular Data Information System (AMDIS), introduced by the IAEA Atomic and Molecular Data Unit, the ALADDIN interface is available on-line. Twelve databases from DOE and IAEA sources are available from the CFADC website under the heading A+M Collisional Databases.

  7. An analysis of a relay servomechanism utilizing a general purpose relay 

    E-Print Network [OSTI]

    Rekoff, Michael G

    1955-01-01

    LIBRARY A 4 M COLLEGE OF TEXAS AN ANALYSIS OF A RELAY SERVOMECHANISM UTILIZING A GENERAL PURPOSE RELAY A Thesis By Michael George Rekoff, Jr. Submitted to the Graduate School of the Agricultural and Mechanical College of Texas in partial... fulfillment of the requirements for the degree of MASTER OF SCIENCE Ma J or Sub J cot: Electrical Engineering May 1955 AN ANALYSIS OF A RELAY SERVOMECHANISM UTILIZING A GENERAL PURPOSE RELAY A Thesis Michael George Rekofi', Jr. Approved as to style...

  8. Coal Mine Information System Map Viewer The Coal Mine Information System (CMIS) Web site was created to provide online access to maps showing

    E-Print Network [OSTI]

    Polly, David

    . The CMIS Web site allows users to create maps showing the locations of surface and underground coal minesCoal Mine Information System Map Viewer Purpose The Coal Mine Information System (CMIS) Web site was created to provide online access to maps showing locations of coal mines in Indiana. Funding

  9. Near stream groundwater surface water interfaces (GSI) are considered to provide natural remediation for groundwater nitrate before it discharges into surface water bodies,

    E-Print Network [OSTI]

    Lawrence, Deborah

    #12;2 ABSTRACT Near stream groundwater surface water interfaces (GSI) are considered to provide natural remediation for groundwater nitrate before it discharges into surface water bodies, largely. The purpose of this study was to assess the combined influences of hydrological properties on groundwater

  10. Initiate Job Termination Request Salaried Job This job aid provides the steps for initiating a Job Termination Request form from the Manager Self

    E-Print Network [OSTI]

    Calgary, University of

    Page 1 Initiate Job Termination Request ­ Salaried Job Purpose This job aid provides the steps for initiating a Job Termination Request form from the Manager Self Service menu. This process is for Voluntary Terminations only. Please see your HR Services team for support with involuntary terminations. Complete

  11. PROJECT NAME: MEMPHIS AVE. DAM (EPWU Dam #4-TX07017) 1. Provide the name of all non-Federal interests planning to act as the sponsor, including

    E-Print Network [OSTI]

    US Army Corps of Engineers

    PROJECT NAME: MEMPHIS AVE. DAM (EPWU Dam #4-TX07017) 1. Provide the name of all non. The purpose for the feasibility study is to determine the need to update/upgrade the dam in order to assist (NFIP), which allows for flood insurance discounts to local residents. #12;Image 1: Dam location

  12. PROJECT NAME: SCENIC DRIVE DAM (EPWUDam #6-TX07019) 1. Provide the name of all non-Federal interests planning to act as the sponsor, including

    E-Print Network [OSTI]

    US Army Corps of Engineers

    PROJECT NAME: SCENIC DRIVE DAM (EPWUDam #6-TX07019) 1. Provide the name of all non. The purpose for the feasibility study is to determine the need to update/upgrade the dam in order to assist (NFIP), which allows for flood insurance discounts to local residents. #12;Image 1: Dam location

  13. PROJECT NAME: NASHVILLE AVE. DAM (EPWU Dam #3-1. Provide the name of all non-Federal interests planning to act as the sponsor, including

    E-Print Network [OSTI]

    US Army Corps of Engineers

    PROJECT NAME: NASHVILLE AVE. DAM (EPWU Dam #3- TX07016) 1. Provide the name of all non. The purpose for the feasibility study is to determine the need to update/upgrade the dam in order to assist;Image 1: Dam location and affected community areas l.egend lmoiReiJii

  14. PROJECT NAME: MOREHEAD AVE. DAM (EPWU Dam #2-TX07015) 1. Provide the name of all non-Federal interests planning to act as the sponsor, including

    E-Print Network [OSTI]

    US Army Corps of Engineers

    PROJECT NAME: MOREHEAD AVE. DAM (EPWU Dam #2- TX07015) 1. Provide the name of all non. The purpose for the feasibility study is to determine the need to update/upgrade the dam in order to assist (NFIP), which allows for flood insurance discounts to local residents. #12;Image 1: Dam location

  15. PROJECT NAME: CLIFF ST. DAM (EPWU Dam #10-TX07023) 1. Provide the name of all non-Federal interests planning to act as the sponsor, including

    E-Print Network [OSTI]

    US Army Corps of Engineers

    PROJECT NAME: CLIFF ST. DAM (EPWU Dam #10- TX07023) 1. Provide the name of all non. The purpose for the feasibility study is to determine the need to update/upgrade the dam in order to assist (NFIP), which allows for flood insurance discounts to local residents. #12;Image 1: Dam location

  16. PROJECT NAME: TREMONT AVE. DAM (EPWUDam #7-TX07020) 1. Provide the name of all non-Federal interests planning to act as the sponsor, including

    E-Print Network [OSTI]

    US Army Corps of Engineers

    PROJECT NAME: TREMONT AVE. DAM (EPWUDam #7- TX07020) 1. Provide the name of all non. The purpose for the feasibility study is to determine the need to update/upgrade the dam in order to assist (NFIP), which allows for flood insurance discounts to local residents. #12;Image 1: Dam location

  17. PROJECT NAME: MURCHISON AVE. DAM (EPWUDam #8--TX07021) 1. Provide the name of all non-Federal interests planning to act as the sponsor, including

    E-Print Network [OSTI]

    US Army Corps of Engineers

    PROJECT NAME: MURCHISON AVE. DAM (EPWUDam #8--TX07021) 1. Provide the name of all non. The purpose for the feasibility study is to determine the need to update/upgrade the dam in order to assist (NFIP), which allows for flood insurance discounts to local residents. #12;Image 1: Dam location

  18. Stress effects in structure formation

    E-Print Network [OSTI]

    Roy Maartens; Josep Triginer; David Matravers

    1999-07-14

    Residual velocity dispersion in cold dark matter induces stresses which lead to effects that are absent in the idealized dust model. A previous Newtonian analysis showed how this approach can provide a theoretical foundation for the phenomenological adhesion model. We develop a relativistic kinetic theory generalization which also incorporates the anisotropic velocity dispersion that will typically be present. In addition to density perturbations, we consider the rotational and shape distortion properties of clustering. These quantities together characterize the linear development of density inhomogeneity, and we find exact solutions for their evolution. As expected, the corrections are small and arise only in the decaying modes, but their effect is interesting. One of the modes for density perturbations decays less rapidly than the standard decaying mode. The new rotational mode generates precession of the axis of rotation. The new shape modes produce additional distortion that remains frozen in during the subsequent (linear) evolution, despite the rapid decay of the terms that caused it.

  19. Anode film formation and control

    DOE Patents [OSTI]

    Koski, O.; Marschman, S.C.

    1990-05-01

    A protective film is created about the anode within a cryolite-based electrolyte during electrolytic production of aluminum from alumina. The film functions to minimize corrosion of the anode by the cryolitic electrolyte and thereby extend the life of the anode. Various operating parameters of the electrolytic process are controlled to maintain the protective film about the anode in a protective state throughout the electrolytic reduction of alumina. Such parameters include electrolyte temperature, electrolyte ratio, current density, and Al[sub 2]O[sub 3] concentration. An apparatus is also disclosed to enable identification of the onset of anode corrosion due to disruption of the film to provide real time information regarding the state of the film. 3 figs.

  20. EXPLOITATION AND OPTIMIZATION OF RESERVOIR PERFORMANCE IN HUNTON FORMATION, OKLAHOMA

    SciTech Connect (OSTI)

    Mohan Kelkar

    2003-04-01

    West Carney Field produces from Hunton Formation. All the wells produce oil, water and gas. The main objective of this study is to understand the unique behavior observed in the field. This behavior includes: (1) Decrease in WOR over time; (2) Decrease in GOR at initial stages; (3) High decline rates of oil and gas; and (4) strong hydrodynamic connectivity between wells. This report specifically addresses two issues relevant to our understanding of the West Carney reservoir. By using core and log data as well as fluorescence information, we demonstrate that our hypothesis of how the reservoir is formed is consistent with these observations. Namely, oil migrated in water wet reservoir, over time, oil changed the wettability of some part of the reservoir, oil eventually leaked to upper formations prompting re-introduction of water into reservoir. Because of change in wettability, different pore size distributions responded differently to water influx. This hypothesis is consistent with fluorescence and porosity data, as we explain it in this quarterly report. The second issue deals with how to best calculate connected oil volume in the reservoir. The log data does not necessarily provide us with relevant information regarding oil in place. However, we have developed a new material balance technique to calculate the connected oil volume based on observed pressure and production data. By using the technique to four different fields producing from Hunton formation, we demonstrate that the technique can be successfully applied to calculate the connected oil in place.

  1. EXPLOITATION AND OPTIMIZATION OF RESERVOIR PERFORMANCE IN HUNTON FORMATION, OKLAHOMA

    SciTech Connect (OSTI)

    Mohan Kelkar

    2005-02-01

    Hunton formation in Oklahoma has displayed some unique production characteristics. These include high initial water-oil and gas-oil ratios, decline in those ratios over time and temporary increase in gas-oil ratio during pressure build up. The formation also displays highly complex geology, but surprising hydrodynamic continuity. This report addresses three key issues related specifically to West Carney Hunton field and, in general, to any other Hunton formation exhibiting similar behavior: (1) What is the primary mechanism by which oil and gas is produced from the field? (2) How can the knowledge gained from studying the existing fields can be extended to other fields which have the potential to produce? (3) What can be done to improve the performance of this reservoir? We have developed a comprehensive model to explain the behavior of the reservoir. By using available production, geological, core and log data, we are able to develop a reservoir model which explains the production behavior in the reservoir. Using easily available information, such as log data, we have established the parameters needed for a field to be economically successful. We provide guidelines in terms of what to look for in a new field and how to develop it. Finally, through laboratory experiments, we show that surfactants can be used to improve the hydrocarbons recovery from the field. In addition, injection of CO{sub 2} or natural gas also will help us recover additional oil from the field.

  2. The Role of Heating and Enrichment in Galaxy Formation

    E-Print Network [OSTI]

    Evan Scannapieco; Tom Broadhurst

    2000-10-11

    We show that the winds identified with high-redshift low-mass galaxies may strongly affect the formation of stars in more massive galaxies that form later. With 3D realizations of a simple linear growth model we track gas shocking, metal enrichment, and cooling, together with dark halo formation. We show that outflows typically strip baryonic material out of collapsing intermediate mass halos, suppressing star formation. More massive halos can trap the heated gas but collapse late, leading to a broad bimodal redshift distribution, with a larger characteristic mass associated with the lower redshift peak. This scenario accounts for the observed bell-shaped luminosity function of early type galaxies, explains the small number of Milky Way satellite galaxies relative to Cold Dark Matter models predictions, and provides a possible explanation for the lack of metal poor G-dwarfs in the solar neighborhood and the more general lack of low-metallicity stars in massive galaxies relative to ``closed-box'' models of chemical enrichment. Intergalactic medium heating from outflows should produce spectral distortions in the cosmic microwave background that will be measurable with the next generation of experiments.

  3. Corrosion Protection Provided by PV Module Packaging Materials

    SciTech Connect (OSTI)

    Jorgensen, G. J.; Kempe, M. D.; Terwilliger, K. M.; McMahon, T. J.

    2005-11-01

    The ability of glass/glass and glass/breathable backsheet constructions laminated with various encapsulant and/or edge seal materials to protect thin-film aluminum coatings deposited onto glass substrates was assessed. Although they provide the best moisture barrier available, glass/glass laminate constructions can trap harmful compounds that catalyze moisture-driven corrosion of the aluminum. Constructions with breathable backsheets allow higher rates of moisture ingress, but also allow egress of deleterious substances that can result in decreased corrosion.

  4. Extreme high-head portables provide more pumping options

    SciTech Connect (OSTI)

    Fiscor, S.

    2006-10-15

    Three years ago, Godwin Pumps, one of the largest manufacturers of portable pumps, introduced its Extreme Duty High Lift (HL) series of pumps and more mines are finding unique applications for these pumps. The Extreme HL series is a range single-stage Dri-Prime pumps with heads up to 600 feet and flows up to 5,000 gallons per minute. The American Coal Co.'s Galatia mine, an underground longwall mine in southern Illinois, used an HL 160 to replace a multiple-staged centrifugal pump. It provided Galatia with 1,500 gpm at 465 ft. 3 photos.

  5. Method for providing oxygen ion vacancies in lanthanide oxides

    DOE Patents [OSTI]

    Kay, D. Alan R. (4305 Lakeshore Rd., Burlington, CA); Wilson, William G. (820 Harden Dr., Pittsburgh, PA 15229)

    1989-12-05

    A method for desulfurization of fuel gases resulting from the incomplete combustion of sulfur containing hydrocarbons whereby the gases are treated with lanthanide oxides containing large numbers of oxygen-ion vacancies providing ionic porosity which enhances the ability of the lanthanide oxides to react more rapidly and completely with the sulfur in the fuel gases whereby the sulfur in such gases is reduced to low levels suitable for fuels for firing into boilers of power plants generating electricity with steam turbine driven generators, gas turbines, fuel cells and precursors for liquid fuels such as methanol and the like.

  6. Method for providing a low density high strength polyurethane foam

    DOE Patents [OSTI]

    Whinnery, Jr., Leroy L.; Goods, Steven H.; Skala, Dawn M.; Henderson, Craig C.; Keifer, Patrick N.

    2013-06-18

    Disclosed is a method for making a polyurethane closed-cell foam material exhibiting a bulk density below 4 lbs/ft.sup.3 and high strength. The present embodiment uses the reaction product of a modified MDI and a sucrose/glycerine based polyether polyol resin wherein a small measured quantity of the polyol resin is "pre-reacted" with a larger quantity of the isocyanate in a defined ratio such that when the necessary remaining quantity of the polyol resin is added to the "pre-reacted" resin together with a tertiary amine catalyst and water as a blowing agent, the polymerization proceeds slowly enough to provide a stable foam body.

  7. Energetic composites and method of providing chemical energy

    DOE Patents [OSTI]

    Danen, Wayne C. (Los Alamos, NM); Martin, Joe A. (Espanola, NM)

    1997-01-01

    A method for providing chemical energy and energetic compositions of matter consisting of thin layers of substances which will exothermically react with one another. The layers of reactive substances are separated by thin layers of a buffer material which prevents the reactions from taking place until the desired time. The reactions are triggered by an external agent, such as mechanical stress or an electric spark. The compositions are known as metastable interstitial composites (MICs). This class of compositions includes materials which have not previously been capable of use as energetic materials. The speed and products of the reactions can be varied to suit the application.

  8. Loads Providing Ancillary Services: Review of International Experience

    SciTech Connect (OSTI)

    Heffner, Grayson; Goldman, Charles; Kintner-Meyer, Michael

    2007-05-01

    In this study, we examine the arrangements for and experiences of end-use loads providing ancillary services (AS) in five electricity markets: Australia, the United Kingdom (UK), the Nordic market, and the ERCOT and PJM markets in the United States. Our objective in undertaking this review of international experience was to identify specific approaches or market designs that have enabled customer loads to effectively deliver various ancillary services (AS) products. We hope that this report will contribute to the ongoing discussion in the U.S. and elsewhere regarding what institutional and technical developments are needed to ensure that customer loads can meaningfully participate in all wholesale electricity markets.

  9. Energetic composites and method of providing chemical energy

    DOE Patents [OSTI]

    Danen, W.C.; Martin, J.A.

    1997-02-25

    A method is described for providing chemical energy and energetic compositions of matter consisting of thin layers of substances which will exothermically react with one another. The layers of reactive substances are separated by thin layers of a buffer material which prevents the reactions from taking place until the desired time. The reactions are triggered by an external agent, such as mechanical stress or an electric spark. The compositions are known as metastable interstitial composites (MICs). This class of compositions includes materials which have not previously been capable of use as energetic materials. The speed and products of the reactions can be varied to suit the application. 3 figs.

  10. ARPES Provides Direct Evidence of Spin-Wave Coupling

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsicloudden Documentation DataStreamsTotal OzoneStudy of theDepartmentARPES Provides

  11. ARPES Provides Direct Evidence of Spin-Wave Coupling

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsicloudden Documentation DataStreamsTotal OzoneStudy of theDepartmentARPES ProvidesARPES

  12. ARPES Provides Direct Evidence of Spin-Wave Coupling

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsicloudden Documentation DataStreamsTotal OzoneStudy of theDepartmentARPESARPES Provides

  13. Comments on: Texas Tech University mobile doppler radars provide unique

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11texas-tech-university-mobile-doppler-radars-provide-unique-wind-measurements-to-multi-instrument-doe-field-campaign

  14. East Providence, Rhode Island: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTIONRobertsdale, AlabamaETEC GmbH Jump to:Providence, Rhode Island: Energy Resources Jump to:

  15. Providence, Rhode Island: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource HistoryPotentialRuralUtilityScalePVGeneration Jump to:SpatialResolutionWidth (m)Power PtyProvidence, Rhode

  16. Providence County, Rhode Island: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to:EA EIS Report Url JumpTechnology Jump to:CapabilitiesProvidence County,

  17. Municipal Bond - Power Purchase Agreement Model Continues to Provide

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i nAand DOEDepartment of Energy Motion to Mr.This page providesLow-Cost

  18. Loop formation in polymers in crowded environment

    E-Print Network [OSTI]

    K. Haydukivska; V. Blavatska

    2015-11-12

    We analyze the probability of a single loop formation in a long flexible polymer chain in disordered environment in $d$ dimensions. The structural defects are considered to be correlated on large distances $r$ according to a power law $\\sim r^{-a}$. Working within the frames of continuous chain model and applying the direct polymer renormalization scheme, we obtain the values of critical exponents governing the scaling of probabilities of loop formation with various positions along the chain as function of loops length. Our results quantitatively reveal that the presence of structural defects in environment decreases the probability of loop formation in polymer macromolecules.

  19. Carbon nanotube formation by laser direct writing

    SciTech Connect (OSTI)

    Wu, Y.-T.; Su, H.-C.; Tsai, C.-M.; Liu, K.-L.; Chen, G.-D.; Huang, R.-H.; Yew, T.-R.

    2008-07-14

    This letter presents carbon nanotube (CNT) formation by laser direct writing using 248 nm KrF excimer pulsed laser in air at room temperature, which was applied to irradiate amorphous carbon (a-C) assisted by Ni catalysts underneath for the transformation of carbon species into CNTs. The CNTs were synthesized under appropriate combination of laser energy density and a-C thickness. The growth mechanism and key parameters to determine the success of CNT formation were also discussed. The demonstration of the CNT growth by laser direct writing in air at room temperature opens an opportunity of in-position CNT formation at low temperatures.

  20. ON THE FORMATION OF MULTIPLE STELLAR POPULATIONS IN GLOBULAR CLUSTERS

    SciTech Connect (OSTI)

    Charlie, Conroy; Spergel, David N. [Department of Astrophysical Sciences, Princeton University, Princeton, NJ 08544 (United States)

    2011-01-01

    Nearly all globular clusters (GCs) studied to date show evidence for multiple stellar populations, in stark contrast to the conventional view that GCs are a mono-metallic, coeval population of stars. This generic feature must therefore emerge naturally within massive star cluster formation. Building on earlier work, we propose a simple physical model for the early evolution (several 10{sup 8} yr) of GCs. We consider the effects of stellar mass loss, Type II supernovae (SNe II) and prompt Type Ia supernovae (SNe Ia), ram pressure, and accretion from the ambient interstellar medium (ISM) on the development of a young GC's own gas reservoir. In our model, SNe II from a first generation of star formation clears the GC of its initial gas reservoir. Over the next several 10{sup 8} yr, mass lost from asymptotic giant branch stars and matter accreted from the ambient ISM collect at the center of the GC. This material must remain quite cool (T {approx} 10{sup 2} K), but does not catastrophically cool on a crossing time because of the high Lyman-Werner flux density in young GCs. The collection of gas within the GC must compete with ram pressure from the ambient ISM. After several 10{sup 8} yr, the Lyman-Werner photon flux density drops by more than three orders of magnitude, allowing molecular hydrogen and then stars to form. After this second generation of star formation, SNe II from the second generation and then prompt SNe Ia associated with the first generation maintain a gas-free GC, thereby ending the cycle of star formation events. Our model makes clear predictions for the presence or absence of multiple stellar populations within GCs as a function of GC mass and formation environment. While providing a natural explanation for the approximately equal number of first- and second-generation stars in GCs, substantial accretion from the ambient ISM may produce fewer chemically peculiar second-generation stars than are observed. Analyzing intermediate-age LMC clusters, we find for the first time evidence for a mass threshold of {approx}10{sup 4} M{sub sun} below which LMC clusters appear to be truly coeval. This threshold mass is consistent with our predictions for the mass at which ram pressure is capable of clearing gas from clusters in the LMC at the present epoch. Recently, claims have been made that multiple populations within GCs require that GCs form at the center of their own dark matter halos. We argue that such a scenario is implausible. Observations of the young and intermediate-age clusters in the LMC and M31 will provide strong constraints on our proposed scenario.

  1. Providing Multi-Page Data Extraction Services with XWRAPComposer

    SciTech Connect (OSTI)

    Liu, Ling; Zhang, Jianjun; Han, Wei; Pu, Calton; Caverlee, James; Park, Sungkeun; Critchlow, Terence J.; Buttler, David; Coleman, Matthew A.

    2008-04-30

    Dynamic Web data sources – sometimes known collectively as the Deep Web – increase the utility of the Web by providing intuitive access to data repositories anywhere that Web access is available. Deep Web services provide access to real-time information, like entertainment event listings, or present a Web interface to large databases or other data repositories. Recent studies suggest that the size and growth rate of the dynamic Web greatly exceed that of the static Web, yet dynamic content is often ignored by existing search engine indexers owing to the technical challenges that arise when attempting to search the Deep Web. To address these challenges, we present DYNABOT, a service-centric crawler for discovering and clustering Deep Web sources offering dynamic content. DYNABOT has three unique characteristics. First, DYNABOT utilizes a service class model of the Web implemented through the construction of service class descriptions (SCDs). Second, DYNABOT employs a modular, self-tuning system architecture for focused crawling of the Deep Web using service class descriptions. Third, DYNABOT incorporates methods and algorithms for efficient probing of the Deep Web and for discovering and clustering Deep Web sources and services through SCD-based service matching analysis. Our experimental results demonstrate the effectiveness of the service class discovery, probing, and matching algorithms and suggest techniques for efficiently managing service discovery in the face of the immense scale of the Deep Web.

  2. Data from selected Almond Formation outcrops -- Sweetwater County, Wyoming

    SciTech Connect (OSTI)

    Jackson, S.R.; Rawn-Schatzinger, V.

    1993-12-01

    The objectives of this research program are to: (1) determine the reservoir characteristics and production problems of shoreline barrier reservoirs; and (2) develop methods and methodologies to effectively characterize shoreline barrier reservoirs to predict flow patterns of injected and produced fluids. Two reservoirs were selected for detailed reservoir characterization studies -- Bell Creek field, Carter County, Montana, that produces from the Lower Cretaceous (Albian-Cenomanian) Muddy Formation, and Patrick Draw field, Sweetwater County, Wyoming that produces from the Upper Cretaceous (Campanian) Almond Formation of the Mesaverde Group. An important component of the research project was to use information from outcrop exposures of the producing formations to study the spatial variations of reservoir properties and the degree to which outcrop information can be used in the construction of reservoir models. A report similar to this one presents the Muddy Formation outcrop data and analyses performed in the course of this study (Rawn-Schatzinger, 1993). Two outcrop localities, RG and RH, previously described by Roehler (1988) provided good exposures of the Upper Almond shoreline barrier facies and were studied during 1990--1991. Core from core well No. 2 drilled approximately 0.3 miles downdip of outcrop RG was obtained for study. The results of the core study will be reported in a separate volume. Outcrops RH and RG, located about 2 miles apart were selected for detailed description and drilling of core plugs. One 257-ft-thick section was measured at outcrop RG, and three sections {approximately}145 ft thick located 490 and 655 feet apart were measured at the outcrop RH. Cross-sections of these described profiles were constructed to determine lateral facies continuity and changes. This report contains the data and analyses from the studied outcrops.

  3. Mechanisms and Geochemical Models of Core Formation

    E-Print Network [OSTI]

    Rubie, David C

    2015-01-01

    The formation of the Earth's core is a consequence of planetary accretion and processes in the Earth's interior. The mechanical process of planetary differentiation is likely to occur in large, if not global, magma oceans created by the collisions of planetary embryos. Metal-silicate segregation in magma oceans occurs rapidly and efficiently unlike grain scale percolation according to laboratory experiments and calculations. Geochemical models of the core formation process as planetary accretion proceeds are becoming increasingly realistic. Single stage and continuous core formation models have evolved into multi-stage models that are couple to the output of dynamical models of the giant impact phase of planet formation. The models that are most successful in matching the chemical composition of the Earth's mantle, based on experimentally-derived element partition coefficients, show that the temperature and pressure of metal-silicate equilibration must increase as a function of time and mass accreted and so m...

  4. Modeling deposit formation in diesel injector nozzle

    E-Print Network [OSTI]

    Sudhiesh Kumar, Chintoo

    2009-01-01

    Formation of deposit in the diesel injector nozzle affects the injection behavior and hinders performance. Under running condition, deposit precursors are washed away by the ensuing injection. However, during the cool down ...

  5. Electromagnetic formation flight of satellite arrays

    E-Print Network [OSTI]

    Kwon, Daniel W., 1980-

    2005-01-01

    Proposed methods of actuating spacecraft in sparse aperture arrays use propellant as a reaction mass. For formation flying systems, propellant becomes a critical consumable which can be quickly exhausted while maintaining ...

  6. Kinetics of acrylamide formation in potato chips 

    E-Print Network [OSTI]

    Granda, Claudia Esthela

    2006-08-16

    Acrylamide is considered a carcinogen in animals and a possible carcinogen in humans. It has been found in starch rich foods cooked at high temperatures. Vacuum frying (10 Torr) was studied as a possible alternative to reduce acrylamide formation...

  7. HYDROCARBON FORMATION ON POLYMER-SUPPORTED COBALT

    E-Print Network [OSTI]

    Benner, Linda S.

    2013-01-01

    NV~ August 25-29, 1980 HYDROCARBON FORMATION ON POLYMER-catalyzed reduction of CO to hydrocarbons Tropscb. Among theof CO to saturated linear hydrocarbons and appears to retain

  8. Model Evaluation of the Thermo-Hydrological Response in Argillaceous Sedimentary Rock Repository for Direct Disposal of Dual-Purpose Canisters

    E-Print Network [OSTI]

    Zheng, Liange

    2014-01-01

    Alternative Concepts for Direct Disposal of Dual-PurposeRock Repository for Direct Disposal of Dual-PurposeRock Repository for Direct Disposal of Dual-Purpose

  9. Situ microbial plugging process for subterranean formations

    DOE Patents [OSTI]

    McInerney, Michael J. (Norman, OK); Jenneman, Gary E. (Norman, OK); Knapp, Roy M. (Norman, OK); Menzie, Donald E. (Norman, OK)

    1985-12-17

    Subterranean paths of water flow are impeded or changed by the facilitation of microbial growth therein. Either indigenous bacterial growth may be stimulated with nutrients or the formation may be first seeded with bacteria or their spores which inhibit fluid flow after proliferation. These methods and bacteria are usable to alter the flow of water in a waterflooded oil formation and to impede the outflow of contaminated water.

  10. Outboard motor provided with a four-stroke engine

    SciTech Connect (OSTI)

    Sumigawa, Y.

    1986-09-16

    This patent describes a lubricating system for an internal combustion engine having a lubricant reservoir adapted to contain a lubricant for the engine. The system includes an inlet line depending into the lubricant reservoir for supplying lubricant for an engine lubricating system, a strainer disposed at the inlet end of the inlet line for removing foreign particles from the lubricant entering the inlet line, a drain opening in the lubricant reservoir for draining lubricant therefrom, and a drain plug for closing the drain opening, the improvement is described comprising the drain opening and the strainer being sized and related for servicing of the strainer through the drain opening, and relief valve means for bypassing the strainer in providing unfiltered lubricant to the inlet line in the event the strainer becomes plugged.

  11. Hair treatment process providing dispersed colors by light diffraction

    DOE Patents [OSTI]

    Sutton, Richard Matthew Charles; Lamartine, Bruce Carvell; Orler, E. Bruce; Song, Shuangqi

    2015-12-22

    A hair treatment process for providing dispersed colors by light diffraction including (a) coating the hair with a material comprising a polymer, (b) pressing the hair with a pressing device including one or more surfaces, and (c) forming a secondary nanostructured surface pattern on the hair that is complementary to the primary nanostructured surface pattern on the one or more surfaces of the pressing device. The secondary nanostructured surface pattern diffracts light into dispersed colors that are visible on the hair. The section of the hair is pressed with the pressing device for from about 1 to 55 seconds. The polymer has a glass transition temperature from about 55.degree. C. to about 90.degree. C. The one or more surfaces include a primary nanostructured surface pattern.

  12. Gas engines provide cogeneration service for Fantoni MDF plant

    SciTech Connect (OSTI)

    Chellini, R.

    1996-12-01

    A large MDF (medium density fiberboard) plant recently started industrial production at the headquarters of Fantoni, in Osoppo (UDINE) Italy. Providing electric power and thermal energy to the process is a cogeneration plant based on four large spark-ignited gas engines. The new Osoppo MDF plant processes 800 m{sup 3} of finished boards per day in a manufacturing line that combines the most advanced technologies available from several European equipment manufacturers. The cogeneration plant features four type 12VA32G spark-ignited gas engines from Fincantieri`s Diesel Engine Division, driving 50Hz, 6.3 kV, 5400 kVA Ansaldo generators at 750 r/min. The turbocharged and intercooled engines are a spark-ignited version of the company`s A32 diesel. They feature 12 Vee-arranged cylinders with 320 mm bore and 390 mm stroke. 5 figs.

  13. Site assessment guidelines provide road map in due diligence

    SciTech Connect (OSTI)

    Not Available

    1994-03-01

    Buyers, sellers and lenders of commercial and industrial real estate since the 1980s have faced potential liability under CERCLA for property contamination. The law stipulates that buyers must exercise due diligence'', conducting all appropriate inquiry'' to determine past ownership and uses of a property, and whether contamination exists. Buyers of polluted property can avoid liability only by showing that contamination occurred before the property was transferred to them, and that they had no knowledge or reason to know'' about the contamination at the time of purchase. Owners or sellers of contaminated property, as well as buyers aware of the contamination at time of purchase, may be designated potentially responsible parties (PRPs) under CERCLA and held liable for site cleanup. Lenders that participate in managing a contaminated property also may be designated PRPs. EPA in 1992 provided a liability exemption for lenders with limited or no management responsibilities for a contaminated property.

  14. Hybrid Solar Lighting Provides Energy Savings and Reduces Waste Heat

    SciTech Connect (OSTI)

    Lapsa, Melissa Voss; Maxey, L Curt; Earl, Dennis Duncan; Beshears, David L; Ward, Christina D; Parks, James Edgar

    2006-01-01

    ABSTRACT Artificial lighting is the largest component of electricity use in commercial U.S. buildings. Hybrid solar lighting (HSL) provides an exciting new means of reducing energy consumption while also delivering significant ancillary benefits associated with natural lighting in buildings. As more than half of all federal facilities are in the Sunbelt region (defined as having an average direct solar radiation of greater than 4 kWh/m2/day) and as more than half of all square footage available in federal buildings is also in the Sunbelt, HSL is an excellent technology fit for federal facilities. The HSL technology uses a rooftop, 4-ft-wide dish and secondary mirror that track the sun throughout the day (Fig. 1). The collector system focuses the sunlight onto 127 optical fibers. The fibers serve as flexible light pipes and are connected to hybrid light fixtures that have special diffusion rods that spread out the light in all directions. One collector powers about eight hybrid light fixtures-which can illuminate about 1,000 square feet. The system tracks at 0.1 accuracy, required by the two-mirror geometry to keep the focused beam on the fiber bundle. When sunlight is plentiful, the optical fibers in the luminaires provide all or most of the light needed in an area. During times of little or no sunlight, a sensor controls the intensity of the artificial lamps to maintain a desired illumination level. Unlike conventional electric lamps, the natural light produces little to no waste heat and is cool to the touch. This is because the system's solar collector removes the infrared light-the part of the spectrum that generates a lot of the heat in conventional bulbs-from the sunlight.

  15. Provided to Michigan State University as an example system description for educational purposes only. All questions should be directed to the instructor, Dr. Betty H.C. Cheng at Michigan State University.

    E-Print Network [OSTI]

    idle when the vehicle is stopped, the average car's fuel economy will improve by about 3.5 %. While emissions are reduced by approximately 4%, making this a truly green technology. Assisted Direct Start emissions. The engine is automatically restarted when the driver releases the brake and engages the gas

  16. University of New Orleans Financial Conflict of Interest (FCOI) Information Digest The purpose of this Document is to provide to UNO researchers an overview of the 2011 revised U.S. Public Health Service (PHS) FCOI regulation

    E-Print Network [OSTI]

    Li, X. Rong

    ), Office of the Inspector General (OIG); Substance Abuse and Mental Health Services Administration (SAMHSA or disclosure of the monetary value. Subrecipient Institutions/Investigators and Reporting of identified FCOIs on their COI policy must report identified FCOIs to UNO in sufficient time to allow UNO to file reports

  17. The Pilot Program for Enhancement of Employee Whistleblower Protection (41 U.S.C. 4712)(the "Program") is effective until January 1, 2017. The purpose of the Program is to provide protections for

    E-Print Network [OSTI]

    Bushman, Frederic

    of a committee of Congress; · An Inspector General; · The Government Accountability Office; · A Federal employee submit it to the Inspector General of the Federal agency that issued the contract or grant in which been retaliated against because you reported one of the activities above, Penn wants to hear about it

  18. A Recipe for Galaxy Formation Shaun Cole

    E-Print Network [OSTI]

    Alfonso Aragon-Salamanca; Carlos S. Frenk; Julio F. Navarro; Stephen E. Zepf

    1994-02-01

    We present a detailed prescription for how galaxy formation can be modelled in hierarchical theories of structure formation. Our model incorporates the formation and merging of dark matter halos, the shock heating and radiative cooling of baryonic gas gravitationally confined in these halos, the formation of stars regulated by the energy released by evolving stars and supernovae, the merging of galaxies within dark matter halos, and the spectral evolution of the stellar populations that are formed. The procedure that we describe is very flexible and can be applied to any hierarchical clustering theory. We explore the effects of varying the stellar initial mass function, star formation rates and galaxy merging. The results we compare with an extensive range of observational data, including the B and K galaxy luminosity functions, galaxy colours, the Tully-Fisher relation and galaxy number counts.These data strongly constrain the models and enable the relative importance of each of the physical process to be assessed. We present a broadly successful model defined by a plausible choice of parameters. This fiducial model produces a much more acceptable luminosity function than most previous studies. This is achieved through a modest rate of galaxy mergers and strong suppression of star formation in halos of low circular velocity. However, it fails to produce galaxies as red as many observed ellipticals and, compared with the observed Tully-Fisher relation, the model galaxies have circular velocities which are too large. ** uuencoded compressed postscript file containing all text and figures.**

  19. Star formation relations in nearby molecular clouds

    SciTech Connect (OSTI)

    Evans, Neal J. II; Heiderman, Amanda; Vutisalchavakul, Nalin

    2014-02-20

    We test some ideas for star formation relations against data on local molecular clouds. On a cloud by cloud basis, the relation between the surface density of star formation rate and surface density of gas divided by a free-fall time, calculated from the mean cloud density, shows no significant correlation. If a crossing time is substituted for the free-fall time, there is even less correlation. Within a cloud, the star formation rate volume and surface densities increase rapidly with the corresponding gas densities, faster than predicted by models using the free-fall time defined from the local density. A model in which the star formation rate depends linearly on the mass of gas above a visual extinction of 8 mag describes the data on these clouds, with very low dispersion. The data on regions of very massive star formation, with improved star formation rates based on free-free emission from ionized gas, also agree with this linear relation.

  20. Program Abstracts: Formation and Growth of Atmospheric Aerosols

    SciTech Connect (OSTI)

    Peter H. McMurry; Markku Kulmala

    2006-09-07

    DOE provided $11,000 to sponsor the Workshop on New Particle Formation in the Atmosphere, which was held at The Riverwood Inn and Conference Center near Minneapolis, MN from September 7 to 9, 2006. Recent work has shown that new particle formation is an important atmospheric process that must be better understood due to its impact on cloud cover and the Earth's radiation balance. The conference was an informal gathering of atmospheric and basic scientists with expertise pertinent to this topic. The workshop included discussions of: • atmospheric modeling; • computational chemistry pertinent to clustering; • ions and ion induced nucleation; • basic laboratory and theoretical studies of nucleation; • studies on neutral molecular clusters; • interactions of organic compounds and sulfuric acid; • composition of freshly nucleated particles. Fifty six scientists attended the conference. They included 27 senior scientists, 9 younger independent scientists (assistant professor or young associate professor level), 7 postdocs, 13 graduate students, 10 women, 35 North Americans (34 from the U.S.), 1 Asian, and 20 Europeans. This was an excellent informal workshop on an important topic. An effort was made to include individuals from communities that do not regularly interact. A number of participants have provided informal feedback indicating that the workshop led to research ideas and possible future collaborations.

  1. Worming Their Way into Shape: Toroidal Formations in Micellar Solutions

    SciTech Connect (OSTI)

    Cardiel Rivera, Joshua J.; Tonggu, Lige; Dohnalkova, Alice; de la Iglesia, Pablo; Pozzo, Danilo C.; Shen, Amy

    2013-11-01

    We report the formation of nanostructured toroidal micellar bundles (nTMB) from a semidilute wormlike micellar solution, evidenced by both cryogenicelectron microscopy and transmission electron microscopy images. Our strategy for creating nTMB involves a two-step protocol consisting of a simple prestraining process followed by flow through a microfluidic device containing an array of microposts, producing strain rates in the wormlike micelles on the order of 105 s^1. In combination with microfluidic confinement, these unusually large strain rates allow for the formation of stable nTMB. Electron microscopy images reveal a variety of nTMB morphologies and provide the size distribution of the nTMB. Small-angle neutron scattering indicates the underlying microstructural transition from wormlike micelles to nTMB. We also show that other flow-induced approaches such as sonication can induce and control the emergence of onion-like and nTMB structures, which may provide a useful tool for nanotemplating.

  2. UNIVERSITY OF CALGARY Modeling Fracture Formation on Growing Surfaces

    E-Print Network [OSTI]

    Prusinkiewicz, Przemyslaw

    UNIVERSITY OF CALGARY Modeling Fracture Formation on Growing Surfaces by Pavol Federl A THESIS Fracture Formation on Growing Surfaces" submitted by Pavol Federl in partial fulfillment This thesis describes a framework for modeling fracture formation on differentially growing, bi- layered

  3. Method for reducing sulfate formation during regeneration of hot-gas desulfurization sorbents

    DOE Patents [OSTI]

    Bissett, Larry A. (Morgantown, WV); Strickland, Larry D. (Morgantown, WV); Rockey, John M. (Westover, WV)

    1994-01-01

    The regeneration of sulfur sorbents having sulfate forming tendencies and used for desulfurizing hot product gas streams such as provided by coal gasification is provided by employing a two-stage regeneration method. Air containing a sub-stoichiometric quantity of oxygen is used in the first stage for substantially fully regenerating the sorbent without sulfate formation and then regeneration of the resulting partially regenerated sorbent is completed in the second stage with air containing a quantity of oxygen slightly greater than the stoichiometric amount adequate to essentially fully regenerate the sorbent. Sulfate formation occurs in only the second stage with the extent of sulfate formation being limited only to the portion of the sulfur species contained by the sorbent after substantially all of the sulfur species have been removed therefrom in the first stage.

  4. Novel Electrolyzer Applications: Providing More Than Just Hydrogen

    SciTech Connect (OSTI)

    Eichman, J.; Harrison, K.; Peters, M.

    2014-09-01

    Hydrogen can be used for many different applications and can be integrated into many different system architectures. One of the methods for producing the hydrogen is to use an electrolyzer. This work explores the flexibility of electrolyzers to behave as responsive loads. Experimental tests were performed for a proton exchange membrane (PEM) and an alkaline electrolyzer to assess the operational flexibility of electrolyzers to behave as responsive loads. The results are compared to the operational requirements to participate in end-user facility energy management, transmission and distribution system support, and wholesale electricity market services. Electrolyzers begin changing their electricity demand within milliseconds of a set-point change. The settling time after a set-point change is on the order of seconds. It took 6.5 minutes for the PEM unit to execute a cold start and 1 minute to turn off. In addition, a frequency disturbance correction test was performed and electrolyzers were able to accelerate the speed that the grid frequency can be restored. Electrolyzers acting as demand response devices can respond sufficiently fast and for a long enough duration to participate in all of the applications explored. Furthermore, electrolyzers can be operated to support a variety of applications while also providing hydrogen for industrial processes, transportation fuel, or heating fuel. Additionally, favorable operating properties and a variety of potential system architectures showcase the flexibility of electrolyzer systems.

  5. Precision tip-tilt-piston actuator that provides exact constraint

    DOE Patents [OSTI]

    Hale, Layton C. (Livermore, CA)

    1999-01-01

    A precision device which can precisely actuate three degrees of freedom of an optic mount, commonly referred to as tip, tilt, and piston. The device consists of three identical flexure mechanisms, an optic mount to be supported and positioned, a structure that supports the flexure mechanisms, and three commercially available linear actuators. The advantages of the precision device is in the arrangement of the constraints offered by the flexure mechanism and not in the particular design of the flexure mechanisms, as other types of mechanisms could be substituted. Each flexure mechanism constrains two degrees of freedom in the plane of the mechanisms and one direction is actuated. All other degrees of freedom are free to move within the range of flexure mechanisms. Typically, three flexure mechanisms are equally spaced in angle about to optic mount and arranged so that each actuated degree of freedom is perpendicular to the plane formed by the optic mount. This arrangement exactly constrains the optic mount and allows arbitrary actuated movement of the plane within the range of the flexure mechanisms. Each flexure mechanism provides a mechanical advantage, typically on the order of 5:1, between the commercially available actuator and the functional point on the optic mount. This improves resolution by the same ratio and stiffness by the square of the ratio.

  6. Pressure monitoring technique provides cost-savings solution

    SciTech Connect (OSTI)

    Blanchard, J.O.

    1994-05-01

    EnergyNorth Natural Gas, Inc. solved its concern over cost-effectively retrieving various amounts of data over an extensive geographical area with a smart pressure transmitter. Much of the company's existing technology was either old, or required a substantial degree of manual intervention. It was determined that the age along with manual requirements would have an adverse effect on future management operations. The company explored the market for alternative solutions and the search led to the Rosemount Model 1151 Smart Pressure Transmitter. The transmitter was particularly appealing because it allowed direct communication with the transmitter through a modem without additional peripheral devices. The supplier was contacted directly regarding the interest in using the devices for monitoring the ENGI system pressures. Specifications for the HART protocol was provided which was used to determine how to utilize the transmitters to obtain cost-effective pressure readings. The smart transmitters proved to be the driving force behind the entire SCADA system installation. The use of these transmitters will pay for SCADA installation over a 5-year period.

  7. Mixed-mode diesel HCCI with External Mixture Formation: Preliminary...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Mixed-mode diesel HCCI with External Mixture Formation: Preliminary Results Mixed-mode diesel HCCI with External Mixture Formation: Preliminary Results 2003 DEER Conference...

  8. Formation and Stability of Impurity "Snakes" in Tokamak Plasmas...

    Office of Scientific and Technical Information (OSTI)

    Formation and Stability of Impurity "Snakes" in Tokamak Plasmas Citation Details In-Document Search Title: Formation and Stability of Impurity "Snakes" in Tokamak Plasmas Authors:...

  9. Evidence of a halo formation mechanism in the Spallation Neutron...

    Office of Scientific and Technical Information (OSTI)

    Published Article: Evidence of a halo formation mechanism in the Spallation Neutron Source linac Title: Evidence of a halo formation mechanism in the Spallation Neutron Source...

  10. Uncovering Fundamental Ash-Formation Mechanisms and Potential...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Uncovering Fundamental Ash-Formation Mechanisms and Potential Means to Control the Impact on DPF Performance and Engine Efficiency Uncovering Fundamental Ash-Formation Mechanisms...

  11. Energy Secretary Moniz Announces Formation of Nuclear Energy...

    Office of Environmental Management (EM)

    Formation of Nuclear Energy Tribal Working Group Energy Secretary Moniz Announces Formation of Nuclear Energy Tribal Working Group December 12, 2014 - 2:00pm Addthis News Media...

  12. The role of polymer formation during vapor phase lubrication...

    Office of Scientific and Technical Information (OSTI)

    The role of polymer formation during vapor phase lubrication of silicon. Citation Details In-Document Search Title: The role of polymer formation during vapor phase lubrication of...

  13. STRATIGRAPHY, STRUCTURE AND ROCK MASS PROPERTIES OF THE HARTLAND FORMATION, SECOND AVENUE SUBWAY, NYC, NY

    E-Print Network [OSTI]

    Merguerian, Charles

    STRATIGRAPHY, STRUCTURE AND ROCK MASS PROPERTIES OF THE HARTLAND FORMATION, SECOND AVENUE SUBWAY in NYC has provided an opportunity for a thorough three-dimensional study of the stratigraphy, structure of excavation. To Cite This Abstract: Merguerian, Charles; and Merguerian, J. Mickey, 2014a, Stratigraphy

  14. State Policies Provide Critical Support for Renewable Electricity

    SciTech Connect (OSTI)

    Barbose, Galen; Wiser, Ryan; Bolinger, Mark

    2008-07-15

    Growth in renewable energy in the U.S. over the past decade has been propelled by a number of forces, including rising fossil fuel prices, environmental concerns, and policy support at the state and federal levels. In this article, we review and discuss what are arguably the two most important types of state policies for supporting electricity generation from geothermal and other forms of renewable energy: renewables portfolio standards and utility integrated resource planning requirements. Within the Western U.S., where the vast majority of the nation's readily-accessible geothermal resource potential resides, these two types of state policies have been critical to the growth of renewable energy, and both promise to continue to play a fundamental role for the foreseeable future. In its essence, a renewables portfolio standard (RPS) requires utilities and other retail electricity suppliers to produce or purchase a minimum quantity or percentage of their generation supply from renewable resources. RPS purchase obligations generally increase over time, and retail suppliers typically must demonstrate compliance on an annual basis. Mandatory RPS policies are backed by various types of compliance enforcement mechanisms, although most states have incorporated some type of cost-containment provision, such as a cost cap or a cap on retail rate impacts, which could conceivably allow utilities to avoid (full) compliance with their RPS target. Currently, 27 states and the District of Columbia have mandatory RPS requirements. Within the eleven states of the contiguous Western U.S., all but three (Idaho, Utah, and Wyoming) now have a mandatory RPS legislation (Utah has a more-voluntary renewable energy goal), covering almost 80% of retail electricity sales in the region. Although many of these state policies have only recently been established, their impact is already evident: almost 1800 MW of new renewable capacity has been installed in Western states following the implementation of RPS policies. To date, wind energy has been the primary beneficiary of state RPS policies, representing approximately 83% of RPS-driven renewable capacity growth in the West through 2007. Geothermal energy occupies a distant second place, providing 7% of RPS-driven new renewable capacity in the West since the late 1990s, though geothermal's contribution on an energy (MWh) basis is higher. Looking to the future, a sizable quantity of renewable capacity beyond pre-RPS levels will be needed to meet state RPS mandates: about 25,000 MW by 2025 within the Western U.S. Geothermal energy is beginning to provide an increasingly significant contribution, as evidenced by the spate of new projects recently announced to meet state RPS requirements. Most of this activity has been driven by the RPS policies in California and Nevada, where the Geothermal Energy Association has identified 47 new geothermal projects, totaling more than 2,100 MW, in various stages of development. Additional geothermal projects in Arizona, New Mexico, Oregon, and Washington are also under development to meet those states RPS requirements. The other major state policy driver for renewable electricity growth, particularly in the West, is integrated resource planning (IRP). IRP was first formalized as a practice in the 1980s, but the practice was suspended in some states as electricity restructuring efforts began. A renewed interest in IRP has emerged in the past several years, however, with several Western states (California, Montana, and New Mexico) reestablishing IRP and others developing new rules to strengthen their existing processes. In its barest form, IRP simply requires that utilities periodically submit long-term resource procurement plans in which they evaluate alternative strategies for meeting their resource needs over the following ten to twenty years. However, many states have developed specific requirements for the IRP process that directly or indirectly support renewable energy. The most general of these is an explicit requirement that utilities evaluate renewables, and that

  15. Beginning of Construction for Purposes of the Renewable Electricity Production Tax Credit and Energy Investment Tax Credit

    Broader source: Energy.gov [DOE]

    Beginning of Construction for Purposes of the Renewable Electricity Production Tax Credit and Energy Investment Tax Credit

  16. Structure of a single-chain Fv bound to the 17 N-terminal amino acids of huntingtin provides insights into pathogenic amyloid formation and suppression

    E-Print Network [OSTI]

    De Genst, Erwin; Chirgadze, Dimitri Y.; Klein, Fabrice A. C.; Butler, David C.; Matak-Vinkovi?, Dijana; Trottier, Yvon; Huston, James S.; Messer, Anne; Dobson, Christopher M.

    2015-04-08

    -peroxidase antibodies. Crystallization, X-ray data collection and structure solution The C4 scFv antibody at 15 mg/ml was mixed with a 5-fold excess of a solubilized freeze-dried HTT(1-17) peptide in 20 mM Hepes buffer at pH 7.4 containing 150 mM NaCl. Crystals were... Avance 700-MHz spectrometer equipped with a cryogenic triple resonance probe (Bruker, Coventry, UK). The chemical shifts of individual spin systems (HN, N, Ca, Cb and CO) were collected manually and the backbone resonance assignments were achieved...

  17. LogTool: A Flexible, Publicly Available Data Analysis Tool Providing Graphical Analysis, Extraction of Data Subsets and Daytyping for Multiple Data Formats 

    E-Print Network [OSTI]

    Qualmann, R. L.; Goudge, P.; Baker, M.

    2007-01-01

    and anomalies in systems so possible cures can be identified. Data plots can be copied into reports and subsets of data extracted for use in numeric analyses outside LogTool. Data are stored in MDB files accessible by MS Access and other software. Log...

  18. Formation of thin walled ceramic solid oxide fuel cells

    DOE Patents [OSTI]

    Claar, Terry D. (Tisle, IL); Busch, Donald E. (Hinsdale, IL); Picciolo, John J. (Lockport, IL)

    1989-01-01

    To reduce thermal stress and improve bonding in a high temperature monolithic solid oxide fuel cell (SOFC), intermediate layers are provided between the SOFC's electrodes and electrolyte which are of different compositions. The intermediate layers are comprised of a blend of some of the materials used in the electrode and electrolyte compositions. Particle size is controlled to reduce problems involving differential shrinkage rates of the various layers when the entire structure is fired at a single temperature, while pore formers are provided in the electrolyte layers to be removed during firing for the formation of desired pores in the electrode layers. Each layer includes a binder in the form of a thermosetting acrylic which during initial processing is cured to provide a self-supporting structure with the ceramic components in the green state. A self-supporting corrugated structure is thus formed prior to firing, which the organic components of the binder and plasticizer removed during firing to provide a high strength, high temperature resistant ceramic structure of low weight and density.

  19. Porous wall hollow glass microspheres as a medium or substrate for storage and formation of novel materials

    DOE Patents [OSTI]

    Wicks, George G; Serkiz, Steven M.; Zidan, Ragaiy; Heung, Leung K.

    2014-06-24

    Porous wall hollow glass microspheres are provided as a template for formation of nanostructures such as carbon nanotubes, In addition, the carbon nanotubes in combination with the porous wall hollow glass microsphere provides an additional reaction template with respect to carbon nanotubes.

  20. The Impact of Mathematical Modeling on the Production of Special Purpose Cement

    E-Print Network [OSTI]

    Vuik, Kees

    to a sufficiently high temperature. These processes cause the reactions that transform the raw materials in the production industry? Our partnership with Almatis B.V., a special purpose cement manufacturer, resulted in the complete elimination of unscheduled plant shut-downs. Almatis now reports a much more stable manufacturing