National Library of Energy BETA

Sample records for form tool contents

  1. Prioritization Tool Measurement Input Form

    Office of Energy Efficiency and Renewable Energy (EERE)

    BTO encourages stakeholders to recommend updates and improvements to the Prioritization Tool by using the below Measure Input Form.

  2. Seal for fluid forming tools

    DOE Patents [OSTI]

    Golovashchenko, Sergey Fedorovich; Bonnen, John Joseph Francis

    2012-03-20

    An electro-hydraulic forming tool for forming a sheet metal blank in a one-sided die has first and second rigid rings that engage opposite sides of a sheet metal blank. The rigid rings are contained within slots on a die portion and a hydraulic force applicator portion of the forming tool. The seals are either resiliently biased by an elastomeric member or inherently resiliently biased into contact with the blank.

  3. Rib forming tool for tubing

    DOE Patents [OSTI]

    Rowley, James P.; Lewandowski, Edward F.; Groh, Edward F.

    1976-01-01

    Three cylindrical rollers are rotatably mounted equidistant from the center of a hollow tool head on radii spaced 120.degree. apart. Each roller has a thin flange; the three flanges lie in a single plane to form an internal circumferential rib in a rotating tubular workpiece. The tool head has two complementary parts with two rollers in one part of the head and one roller in the other part; the two parts are joined by a hinge. A second hinge, located so the rollers are between the two hinges, connects one of the parts to a tool bar mounted in a lathe tool holder. The axes of rotation of both hinges and all three rollers are parallel. A hole exposing equal portions of the three roller flanges is located in the center of the tool head. The two hinges permit the tool head to be opened and rotated slightly downward, taking the roller flanges out of the path of the workpiece which is supported on both ends and rotated by the lathe. The parts of the tool head are then closed on the workpiece so that the flanges are applied to the workpiece and form the rib. The tool is then relocated for forming of the next rib.

  4. Form:Tool | Open Energy Information

    Open Energy Info (EERE)

    Tool (Redirected from Form:Software Tool) Jump to: navigation, search Input your tool name below to add to the registry. If the tool is already in the registry, you will be able to...

  5. SWS Online Tool now includes Multifamily Content, plus a How...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SWS Online Tool now includes Multifamily Content, plus a How-To Webinar SWS Online Tool now includes Multifamily Content, plus a How-To Webinar This announcement contains ...

  6. Spray-formed tooling and aluminum strip

    SciTech Connect (OSTI)

    McHugh, K.M.

    1995-11-01

    Spray forming is an advanced materials processing technology that converts a bulk liquid metal to a near-net-shape solid by depositing atomized droplets onto a suitably shaped substrate. By combining rapid solidification processing with product shape control, spray forming can reduce manufacturing costs while improving product quality. De Laval nozzles offer an alternative method to the more conventional spray nozzle designs. Two applications are described: high-volume production of aluminum alloy strip, and the production of specialized tooling, such as injection molds and dies, for rapid prototyping.

  7. Form:Community Energy Tools | Open Energy Information

    Open Energy Info (EERE)

    Form Edit History Form:Community Energy Tools Jump to: navigation, search This is the 'Community Energy Tools' form. To add a page with this form, enter the page name below; if a...

  8. ARM - Ingest Supporting Tools and Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Engineering Home Workflow Graphic Engineering Workflow Document Tools for Workflow ECR ECO BCR Ingests Value-Added Products Reprocessing Instruments Data System Elements Field...

  9. Form:Tool | Open Energy Information

    Open Energy Info (EERE)

    to add to the registry. If the tool is already in the registry, you will be able to edit its existing information. Submit Retrieved from "http:en.openei.orgw...

  10. Cutting tool form compensation system and method

    DOE Patents [OSTI]

    Barkman, W.E.; Babelay, E.F. Jr.; Klages, E.J.

    1993-10-19

    A compensation system for a computer-controlled machining apparatus having a controller and including a cutting tool and a workpiece holder which are movable relative to one another along a preprogrammed path during a machining operation utilizes a camera and a vision computer for gathering information at a preselected stage of a machining operation relating to the actual shape and size of the cutting edge of the cutting tool and for altering the preprogrammed path in accordance with detected variations between the actual size and shape of the cutting edge and an assumed size and shape of the cutting edge. The camera obtains an image of the cutting tool against a background so that the cutting tool and background possess contrasting light intensities, and the vision computer utilizes the contrasting light intensities of the image to locate points therein which correspond to points along the actual cutting edge. Following a series of computations involving the determining of a tool center from the points identified along the tool edge, the results of the computations are fed to the controller where the preprogrammed path is altered as aforedescribed. 9 figures.

  11. Cutting tool form compensaton system and method

    DOE Patents [OSTI]

    Barkman, William E.; Babelay, Jr., Edwin F.; Klages, Edward J.

    1993-01-01

    A compensation system for a computer-controlled machining apparatus having a controller and including a cutting tool and a workpiece holder which are movable relative to one another along a preprogrammed path during a machining operation utilizes a camera and a vision computer for gathering information at a preselected stage of a machining operation relating to the actual shape and size of the cutting edge of the cutting tool and for altering the preprogrammed path in accordance with detected variations between the actual size and shape of the cutting edge and an assumed size and shape of the cutting edge. The camera obtains an image of the cutting tool against a background so that the cutting tool and background possess contrasting light intensities, and the vision computer utilizes the contrasting light intensities of the image to locate points therein which correspond to points along the actual cutting edge. Following a series of computations involving the determining of a tool center from the points identified along the tool edge, the results of the computations are fed to the controller where the preprogrammed path is altered as aforedescribed.

  12. OSTI search tools cited for "high quality" content | OSTI, US...

    Office of Scientific and Technical Information (OSTI)

    Thomson Scientific recently selected several OSTI search tools and Science.gov for inclusion in Current Web Contents(tm), a growing collection of scholarly Web sites. Thomson cited ...

  13. Method for forming an abrasive surface on a tool

    SciTech Connect (OSTI)

    Seals, R.D.; White, R.L.; Swindeman, C.J.; Kahl, W.K.

    1999-12-21

    A method for fabricating a tool used in cutting, grinding and machining operations, is provided. The method is used to deposit a mixture comprising an abrasive material and a bonding material on a tool surface. The materials are propelled toward the receiving surface of the tool substrate using a thermal spray process. The thermal spray process melts the bonding material portion of the mixture, but not the abrasive material. Upon impacting the tool surface, the mixture or composition solidifies to form a hard abrasive tool coating.

  14. Method for forming an abrasive surface on a tool

    DOE Patents [OSTI]

    Seals, Roland D.; White, Rickey L.; Swindeman, Catherine J.; Kahl, W. Keith

    1999-01-01

    A method for fabricating a tool used in cutting, grinding and machining operations, is provided. The method is used to deposit a mixture comprising an abrasive material and a bonding material on a tool surface. The materials are propelled toward the receiving surface of the tool substrate using a thermal spray process. The thermal spray process melts the bonding material portion of the mixture, but not the abrasive material. Upon impacting the tool surface, the mixture or composition solidifies to form a hard abrasive tool coating.

  15. Spray forming process for producing molds, dies and related tooling

    DOE Patents [OSTI]

    McHugh, Kevin M. (Idaho Falls, ID); Key, James F. (Idaho Falls, ID)

    1998-01-01

    A method for spray forming manufacturing of near-net-shape molds, dies and related toolings, wherein liquid material such as molten metal, metallic alloys, or polymers are atomized into fine droplets by a high temperature, high velocity gas and deposited onto a pattern. Quenching of the atomized droplets provides a heat sink, thereby allowing undercooled and partially solidified droplets to be formed in-flight. Composites can be formed by combining the atomized droplets with solid particles such as whiskers or fibers.

  16. Spray forming system for producing molds, dies and related tooling

    DOE Patents [OSTI]

    McHugh, Kevin M. (Idaho Falls, ID)

    2000-01-01

    A system for the spray forming manufacturing of near-net-shape molds, dies and related toolings, wherein liquid material such as molten metal, metallic alloys, or polymers are atomized into fine droplets by a high temperature, high velocity gas and deposited onto a pattern. Quenching of the atomized droplets provides a heat sink, thereby allowing undercooled and partially solidified droplets to be formed in-flight. Composites can be formed by combining the atomized droplets with solid particles such as powders, whiskers or fibers.

  17. Spray forming process for producing molds, dies and related tooling

    DOE Patents [OSTI]

    McHugh, K.M.; Key, J.F.

    1998-02-17

    A method is disclosed for spray forming manufacturing of near-net-shape molds, dies and related toolings, wherein liquid material such as molten metal, metallic alloys, or polymers are atomized into fine droplets by a high temperature, high velocity gas and deposited onto a pattern. Quenching of the atomized droplets provides a heat sink, thereby allowing undercooled and partially solidified droplets to be formed in-flight. Composites can be formed by combining the atomized droplets with solid particles such as whiskers or fibers. 17 figs.

  18. Building America Webinar: Put New Tools and Content on the Building...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Put New Tools and Content on the Building America Solution Center To Work for You Building America Webinar: Put New Tools and Content on the Building America Solution Center To...

  19. Building America Webinar: Put New Tools and Content on the Building...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Put New Tools and Content on the Building America Solution Center To Work for You Building America Webinar: Put New Tools and Content on the Building America Solution Center To ...

  20. Building America Webinar: Put New Tools and Content on the Building America

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solution Center To Work for You! | Department of Energy Put New Tools and Content on the Building America Solution Center To Work for You! Building America Webinar: Put New Tools and Content on the Building America Solution Center To Work for You! This webinar will describe new updates that have been implemented in the Building America Solution Center that offer exciting new tools and content that builders and industry professionals can put to work immediately. Building America Solution

  1. Building America Webinar: Put New Tools and Content on the Building...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Content on the Building America Solution Center To Work for You Building America Webinar: Put New Tools and Content on the Building America Solution Center To Work for You ...

  2. SWS Online Tool now includes Multifamily Content, plus a How-To Webinar |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy SWS Online Tool now includes Multifamily Content, plus a How-To Webinar SWS Online Tool now includes Multifamily Content, plus a How-To Webinar This announcement contains information on the integration of multifamily content in the SWS Online Tool, and a How-To Webinar on August 27, 2013. mf_content_now_available.pdf (116.96 KB) More Documents & Publications The Standard Work Specifications for Single-Family Home Energy Upgrades are now available€ at your

  3. Method and tool for contracting tubular members by electro-hydraulic forming before hydroforming

    DOE Patents [OSTI]

    Golovashchenko, Sergey Fedorovich

    2011-03-15

    A tubular preform is contracted in an electro-hydraulic forming operation. The tubular preform is wrapped with one or more coils of wire and placed in a chamber of an electro-hydraulic forming tool. The electro-hydraulic forming tool is discharged to form a compressed area on a portion of the tube. The tube is then placed in a hydroforming tool that expands the tubular preform to form a part.

  4. CESP Tool 6.1: Sample Scoring Form for Prioritizing Actions | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy 6.1: Sample Scoring Form for Prioritizing Actions CESP Tool 6.1: Sample Scoring Form for Prioritizing Actions CESP Tool 6.1: Sample Scoring Form for Prioritizing Actions from Step 6: Identify and Prioritize Actions, Guide to the Community Energy Strategic Planning. CESP Tool 6.1: Sample Scoring Form for Prioritizing Actions (44.38 KB) More Documents & Publications Guide to Community Energy Strategic Planning CESP Tool 2.2: Stakeholder Invite Community Energy Strategic Planning

  5. Spray-formed tooling for injection molding and die casting applications

    SciTech Connect (OSTI)

    K. M. McHugh; B. R. Wickham

    2000-06-26

    Rapid Solidification Process (RSP) Tooling{trademark} is a spray forming technology tailored for producing molds and dies. The approach combines rapid solidification processing and net-shape materials processing in a single step. The ability of the sprayed deposit to capture features of the tool pattern eliminates costly machining operations in conventional mold making and reduces turnaround time. Moreover, rapid solidification suppresses carbide precipitation and growth, allowing many ferritic tool steels to be artificially aged, an alternative to conventional heat treatment that offers unique benefits. Material properties and microstructure transformation during heat treatment of spray-formed H13 tool steel are described.

  6. Spray-formed Tooling for Injection Molding and Die Casting Applications

    SciTech Connect (OSTI)

    Mc Hugh, Kevin Matthew

    2000-06-01

    Rapid Solidification Process (RSP) ToolingTM is a spray forming technology tailored for producing molds and dies. The approach combines rapid solidification processing and net-shape materials processing in a single step. The ability of the sprayed deposit to capture features of the tool pattern eliminates costly machining operations in conventional mold making and reduces turnaround time. Moreover, rapid solidification suppresses carbide precipitation and growth, allowing many ferritic tool steels to be artificially aged, an alternative to conventional heat treatment that offers unique benefits. Material properties and microstructure transformation during heat treatment of spray-formed H13 tool steel are described.

  7. Method and tool for expanding tubular members by electro-hydraulic forming

    DOE Patents [OSTI]

    Golovashchenko, Sergey Fedorovich; Bonnen, John Joseph Francis

    2013-10-29

    An electro-hydraulic forming tool having one or more electrodes for forming parts with sharp corners. The electrodes may be moved and sequentially discharged several times to form various areas of the tube. Alternatively, a plurality of electrodes may be provided that are provided within an insulating tube that defines a charge area opening. The insulating tube is moved to locate the charge area opening adjacent one of the electrodes to form spaced locations on a preform. In other embodiments, a filament wire is provided in a cartridge or supported by an insulative support.

  8. Influence of Cooling Rate on Phase Formationin Spray-Formed H13 Tool Steel

    SciTech Connect (OSTI)

    K. M. Mchugh; Y. Lin; Y. Zhou; E. J. Lavernia

    2006-04-01

    Spray forming is an effective way to process many tool steels into near-net-shape molds, dies and related tooling. The general approach involves depositing atomized droplets onto a refractory pattern in order to image the pattern’s features. The pattern is removed and the die is fitted into a standard holding fixture. This approach results in significant cost and lead-time savings compared to conventional machining, Spray-formed dies perform well in many industrial forming operations, oftentimes exhibiting extended die life over conventional dies. Care must be exercised when spray forming tool steel dies to minimize porosity and control the nature and distribution of phases and residual stresses. Selection of post-deposition heat treatment is important to tailor the die’s properties (hardness, strength, impact energy, etc.) for a particular application. This paper examines how the cooling rate and other processing parameters during spray processing and heat treatment of H13 tool steel influence phase formation. Results of case studies on spray-formed die performance in forging, extrusion and die casting, conducted by industry during production runs, will be described.

  9. Glassy slags as novel waste forms for remediating mixed wastes with high metal contents

    SciTech Connect (OSTI)

    Feng, X.; Wronkiewicz, D.J.; Bates, J.K.; Brown, N.R.; Buck, E.C.; Gong, M.; Ebert, W.L.

    1994-03-01

    Argonne National Laboratory (ANL) is developing a glassy slag final waste form for the remediation of low-level radioactive and mixed wastes with high metal contents. This waste form is composed of various crystalline and metal oxide phases embedded in a silicate glass phase. This work indicates that glassy slag shows promise as final waste form because (1) it has similar or better chemical durability than high-level nuclear waste (HLW) glasses, (2) it can incorporate large amounts of metal wastes, (3) it can incorporate waste streams having low contents of flux components (boron and alkalis), (4) it has less stringent processing requirements (e.g., viscosity and electric conductivity) than glass waste forms, (5) its production can require little or no purchased additives, which can result in greater reduction in waste volume and overall treatment costs. By using glassy slag waste forms, minimum additive waste stabilization approach can be applied to a much wider range of waste streams than those amenable only to glass waste forms.

  10. Tool path influence on electric pulse aided deformation during incremental sheet metal forming

    SciTech Connect (OSTI)

    Asgar, J.; Lingam, R. Reddy, V. N.

    2013-12-16

    Titanium and its alloys are difficult to form at room temperature due to their high flow stress. Super plastic deformation of Ti alloys involves low strain rate forming at very high temperatures which need special tooling which can withstand high temperatures. It was observed that when high current density electric pulse is applied during deformation it reduces the flow stress through electron-dislocation interaction. This phenomenon is known as electro-plasticity. In the present work, importance of tool configuration to enhance the formability without much resistive heating is demonstrated for Incremental Sheet Metal Forming (ISMF). Tool configuration is selected to minimize the current carrying zone in DC pulse aided incremental forming to enhance the formability due to electro plasticity and the same is demonstrated by forming two pyramid shaped components of 30° and 45° wall angles using a Titanium alloy sheet of 0.6 mm thickness. Load measurement indicated that a critical current density is essential for the electro-plasticity to be effective and the same is realized with the load and temperature measurements.

  11. Method of forming fluorine-bearing diamond layer on substrates, including tool substrates

    DOE Patents [OSTI]

    Chang, R. P. H.; Grannen, Kevin J.

    2002-01-01

    A method of forming a fluorine-bearing diamond layer on non-diamond substrates, especially on tool substrates comprising a metal matrix and hard particles, such as tungsten carbide particles, in the metal matrix. The substrate and a fluorine-bearing plasma or other gas are then contacted under temperature and pressure conditions effective to nucleate fluorine-bearing diamond on the substrate. A tool insert substrate is treated prior to the diamond nucleation and growth operation by etching both the metal matrix and the hard particles using suitable etchants.

  12. Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Access Procedures for New Users Deposition Request Form Exit Form Flycutting Request Form Hot Embossing Request Form Metrology Request Form Microfabrication Project Proposal Form...

  13. CONTENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8.0 - HOISTING AND RIGGING IN HOSTILE ENVIRONMENTS February 18, 2010 Rev 1 Page 1 CHAPTER 18.0 TABLE OF CONTENTS TABLE OF CONTENTS..................................................................................................................................1 PAGINATION TABLE.....................................................................................................................................1 18.0 HOISTING AND RIGGING IN HOSTILE ENVIRONMENTS

  14. Building America Webinar: Put New Tools and Content on the Building America Solution Center To Work for You!

    Broader source: Energy.gov [DOE]

    The Building America Solution Center is known for its easy-to-follow, illustrated, step-by-step guides for installing the measures that make up high-performance homes. This webinar on July 22, 2015, described a number of updates that offer exciting new tools and content that builders and industry professionals can put to work immediately.

  15. CONTENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3.0 - CRITICAL, SPECIAL, & ENGINEERED LIFTS January 4, 2016 Rev 1 Page 1 CHAPTER 3.0 TABLE OF CONTENTS 3.0 CRITICAL LIFTS ....................................................................................................................................... 3 3.1 SCOPE .......................................................................................................................................................... 3 3.2 CRITICAL LIFT DETERMINATION

  16. CONTENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Volume 2, Sampling Technical Requirements Effective Date: 6/1/07 Vol. 2: i CONTENTS 1.0 SAMPLING AND ANALYSIS PROCESS .................................................................... 1-1 2.0 DATA QUALITY OBJECTIVES ................................................................................... 2-1 3.0 SAMPLING SYSTEMS .................................................................................................. 3-1 3.1 Facility Management

  17. CONTENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Volume 4, Laboratory Technical Requirements Effective Date: 6/1/07 Vol. 4: i CONTENTS 1.0 QUALITY ASSURANCE OBJECTIVES......................................................................... 1-1 1.1 DATA QUALITY OBJECTIVES............................................................................ 1-1 1.2 CLIENT DATA QUALITY REQUIREMENTS ..................................................... 1-2 1.2.1 Precision

  18. Contents

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Program and Book of Abstracts Contents Organizers i-ii Detailed Program iii-viii Oral presentations 1-38 Posters P1-P27 Program Schematic back cover The LAPD Symposium brings together scientists from laser physics, low- temperature plasma chemistry and physics, and nuclear fusion. The Symposium is an important, unique, and fruitful source for cross-fertilization between these fields. Major topics include laser-aided diagnostics for fusion plasmas, industrial process plasmas, and environmental

  19. Contents

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 August 2005 Contents Bechtel Nevada achieves 5 million hours! 1 WSI graduates fresh members of security 1 protective forces Handling radiation emergencies 2 SiteLines features a new editor 2 Rocky Flats survey 3 NTS Swift Water Rescue Team practices on the 3 Colorado River Drilling Program overcomes challenges at the NTS 3 Toastmasters: making effective communication a 4 worldwide reality Atomic Testing Museum update 4 Two more successful shots at JASPER 5 Hazardous Substance Inventory users 5

  20. Contents

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7 June/July 2005 Contents Fires burn Nevada Test Site in June NNSA/NSO and Department of Homeland Security break ground at the Nevada Test Site U1h ribbon cutting marks the remarkable New training grounds dedicated at NTS Changes enhance the EAP Unicorn subcritical experiment completes key milestone New communication system takes flight SiteLines goes online DNFSB visits U1a Funnel clouds at the Nevada Test Site Community Environmental Monitor receives EPA award Take Our Daughters and Sons to

  1. Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    132014 10:58 AM Submitted by Anonymous User This message was created by a Microsoft InfoPath form. The form data may be included as an attachment. Freedom of Information Act...

  2. Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    9:27 PM Submitted by Anonymous User This message was created by a Microsoft InfoPath form. The form data may be included as an attachment. Freedom of Information Act (FOIA)...

  3. Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Forms and Checklists Download or view forms and checklists used at WNR. IWD Forms 2100 - Integrated Work Document (IWD) Part 1, Activity Specific Information (word version) 2100_con - Integrated Work Document (IWD) Part 1, Activity Specific Information Continuation Page (word version) 2101 - Integrated Work Document (IWD) Part 2, FOD Requirements and Approval for Entry and Area Hazards and Controls, Non-Tenant Activity Form (word version) 2102 - Integrated Work Document (IWD) Part 2, FOD

  4. Influence of moisture content, particle size and forming temperature on productivity and quality of rice straw pellets

    SciTech Connect (OSTI)

    Ishii, Kazuei Furuichi, Toru

    2014-12-15

    Highlights: • Optimized conditions were determined for the production of rice straw pellets. • The moisture content and forming temperature are key factors. • High quality rice pellets in the lower heating value and durability were produced. - Abstract: A large amount of rice straw is generated and left as much in paddy fields, which causes greenhouse gas emissions as methane. Rice straw can be used as bioenergy. Rice straw pellets are a promising technology because pelletization of rice straw is a form of mass and energy densification, which leads to a product that is easy to handle, transport, store and utilize because of the increase in the bulk density. The operational conditions required to produce high quality rice straw pellets have not been determined. This study determined the optimal moisture content range required to produce rice straw pellets with high yield ratio and high heating value, and also determined the influence of particle size and the forming temperature on the yield ratio and durability of rice straw pellets. The optimal moisture content range was between 13% and 20% under a forming temperature of 60 or 80 °C. The optimal particle size was between 10 and 20 mm, considering the time and energy required for shredding, although the particle size did not significantly affect the yield ratio and durability of the pellets. The optimized conditions provided high quality rice straw pellets with nearly 90% yield ratio, ⩾12 MJ/kg for the lower heating value, and >95% durability.

  5. Chemical durability and degradation mechanisms of HT9 based alloy waste forms with variable Zr content

    SciTech Connect (OSTI)

    Olson, L. N.

    2015-10-30

    In Corrosion studies were undertaken on alloy waste forms that can result from advanced electrometallurgical processing techniques to better classify their durability and degradation mechanisms. The waste forms were based on the RAW3-(URe) composition, consisting primarily of HT9 steel and other elemental additions to simulate nuclear fuel reprocessing byproducts. The solution conditions of the corrosion studies were taken from an electrochemical testing protocol, and meant to simulate conditions in a repository. The alloys durability was examined in alkaline and acidic brines.

  6. Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the Privacy Act must be signed and, therefore, cannot be submitted : on this form. t Name Richard van Dijk Email , Orga nizati on Mailin g Addre ss city PA State I P Pion e Ex....

  7. Tool For Editing Structured Query Language Text Within ORACLE Forms Applications

    Energy Science and Technology Software Center (OSTI)

    1991-02-01

    SQTTEXT is an ORACLE SQL*Forms application that allows a programmer to view and edit all the Structured Query Language (SQL) text for a given application on one screen. This application is an outgrowth of the prototyping of an on-line system dictionary for the Worldwide Household Goods Information system for Transportation-Modernization decision support system being prototyped by the Oak Ridge National Laboratory, but it can be applied to all SQL*Forms software development, debugging, and maintenance.

  8. EERE Website Content Checklist

    Broader source: Energy.gov [DOE]

    This checklist is a tool to guide EERE content developers and editors in creating and reviewing content for websites.

  9. Quantitative assessment of alkali-reactive aggregate mineral content through XRD using polished sections as a supplementary tool to RILEM AAR-1 (petrographic method)

    SciTech Connect (OSTI)

    Castro, Nelia; Sorensen, Bjorn E.; Broekmans, Maarten A.T.M.

    2012-11-15

    The mineral content of 5 aggregate samples from 4 different countries, including reactive and non-reactive aggregate types, was assessed quantitatively by X-ray diffraction (XRD) using polished sections. Additionally, electron probe microanalyzer (EPMA) mapping and cathodoluminescence (CL) were used to characterize the opal-CT identified in one of the aggregate samples. Critical review of results from polished sections against traditionally powdered specimen has demonstrated that for fine-grained rocks without preferred orientation the assessment of mineral content by XRD using polished sections may represent an advantage over traditional powder specimens. Comparison of data on mineral content and silica speciation with expansion data from PARTNER project confirmed that the presence of opal-CT plays an important role in the reactivity of one of the studied aggregates. Used as a complementary tool to RILEM AAR-1, the methodology suggested in this paper has the potential to improve the strength of the petrographic method.

  10. Supercooled liquid water Estimation Tool

    Energy Science and Technology Software Center (OSTI)

    2012-05-04

    The Cloud Supercooled liquid water Estimation Tool (SEET) is a user driven Graphical User Interface (GUI) that estimates cloud supercooled liquid water (SLW) content in terms of vertical column and total mass from Moderate resolution Imaging Supercooled liquid water Estimation Tool Spectroradiometer (MODIS) spatially derived cloud products and realistic vertical cloud parameterizations that are user defined. It also contains functions for post-processing of the resulting data in tabular and graphical form.

  11. ARM - Metadata Management Tool

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    FormsMetadata Management Tool Ingest Ingest Workflow Graphic Supporting Workflow Documentation Supporting Tools and Forms Process Configuration Manager (PCM) Metadata Management Tool (MMT) ARM Data Integrator (ADI) Ingest Readiness Form Associated Status Reports Contacts Engineering Processes Engineering Home Workflow Graphic Engineering Workflow Document Tools for Workflow ECR ECO BCR Ingests Value-Added Products Reprocessing Instruments Data System Elements Field Campaign Startup Metadata

  12. Omics Tools

    Energy Science and Technology Software Center (OSTI)

    2012-12-21

    The Omics Tools package provides several small trivial tools for work in genomics. This single portable package, the “omics.jar” file, is a toolbox that works in any Java-based environment, including PCs, Macs, and supercomputers. The number of tools is expected to grow. One tool (called cmsearch.hadoop or cmsearch.local), calls the external cmsearch program to predict non-coding RNA in a genome. The cmsearch program is part of the third-party Infernal package. Omics Tools does not containmore » Infernal. Infernal may be installed separately. The cmsearch.hadoop subtool requires Apache Hadoop and runs on a supercomputer, though cmsearch.local does not and runs on a server. Omics Tools does not contain Hadoop. Hadoop mat be installed separartely The other tools (cmgbk, cmgff, fastats, pal, randgrp, randgrpr, randsub) do not interface with third-party tools. Omics Tools is written in Java and Scala programming languages. Invoking the “help” command shows currently available tools, as shown below: schaumbe@gpint06:~/proj/omics$ java -jar omics.jar help Known commands are: cmgbk : compare cmsearch and GenBank Infernal hits cmgff : compare hits among two GFF (version 3) files cmsearch.hadoop : find Infernal hits in a genome, on your supercomputer cmsearch.local : find Infernal hits in a genome, on your workstation fastats : FASTA stats, e.g. # bases, GC content pal : stem-loop motif detection by palindromic sequence search (code stub) randgrp : random subsample without replacement, of groups randgrpr : random subsample with replacement, of groups (fast) randsub : random subsample without replacement, of file lines For more help regarding a particular command, use: java -jar omics.jar command help Usage: java -jar omics.jar command args« less

  13. STEP Utility Data Release Form

    Broader source: Energy.gov [DOE]

    STEP Utility Data Release Form, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  14. THE NASA AMES PAH IR SPECTROSCOPIC DATABASE VERSION 2.00: UPDATED CONTENT, WEB SITE, AND ON(OFF)LINE TOOLS

    SciTech Connect (OSTI)

    Boersma, C.; Mattioda, A. L.; Allamandola, L. J.; Bauschlicher, C. W. Jr.; Ricca, A.; Cami, J.; Peeters, E.; De Armas, F. Sánchez; Saborido, G. Puerta; Hudgins, D. M.

    2014-03-01

    A significantly updated version of the NASA Ames PAH IR Spectroscopic Database, the first major revision since its release in 2010, is presented. The current version, version 2.00, contains 700 computational and 75 experimental spectra compared, respectively, with 583 and 60 in the initial release. The spectra span the 2.5-4000 ÎĽm (4000-2.5 cm{sup -1}) range. New tools are available on the site that allow one to analyze spectra in the database and compare them with imported astronomical spectra as well as a suite of IDL object classes (a collection of programs utilizing IDL's object-oriented programming capabilities) that permit offline analysis called the AmesPAHdbIDLSuite. Most noteworthy among the additions are the extension of the computational spectroscopic database to include a number of significantly larger polycyclic aromatic hydrocarbons (PAHs), the ability to visualize the molecular atomic motions corresponding to each vibrational mode, and a new tool that allows one to perform a non-negative least-squares fit of an imported astronomical spectrum with PAH spectra in the computational database. Finally, a methodology is described in the Appendix, and implemented using the AmesPAHdbIDLSuite, that allows the user to enforce charge balance during the fitting procedure.

  15. Mentee Profile Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Mentee Profile Form (241.46 KB) More Documents & Publications Mentor Profile Form Tools for the Mentor Tools for the Mentee Benefits Executive Resources Learning and Workforce ...

  16. Density and water content of nanoscale solid C-S-H formed in alkali-activated slag (AAS) paste and implications for chemical shrinkage

    SciTech Connect (OSTI)

    Thomas, Jeffrey J.; Allen, Andrew J.; Jennings, Hamlin M.

    2012-02-15

    Alkali-activated slag (AAS) paste was analyzed using small-angle neutron scattering (SANS). The scattering response indicates that the microstructure consists of a uniform matrix of hydration product with a high surface area studded with unhydrated cores of slag particles. In contrast with portland cement paste, no surface fractal scattering regime was detected, and elevated temperature curing (at 60 Degree-Sign C) had no detectable effect on the microstructure at any length scale studied. The specific surface area of the AAS pastes is about 25% higher than that of a portland cement paste cured under the same conditions. The composition and mass density of the nanoscale solid C-S-H phase formed in the AAS paste was determined using a previously developed neutron scattering method, in conjunction with a hydration model. The result ((CaO){sub 0.99}-SiO{sub 2}-(Al{sub 2}O{sub 3}){sub 0.06}-(H{sub 2}O){sub 0.97}, d = (2.73 {+-} 0.02) g/cm{sup 3}) is significantly lower in calcium and in water as compared to portland cement or pure tricalcium silicate paste. These values were used to calculate the chemical shrinkage that would result from complete hydration of the AAS paste. The result, (12.2 {+-} 1.5) cm{sup 3} of volumetric shrinkage per 100 g of unhydrated cement, is about twice the amount of chemical shrinkage exhibited by normal cement pastes.

  17. Service Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Service Forms Beamtime Request Form Deposition Request Form Exposure Request Form - pdf Fly Cutting Request Form Hot Embossing Request Form Metrology Request Form

  18. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    ,,"(202) 586-8800",,,"10302015 12:46:21 PM" "Back to Contents","Data 1: Rhode Island Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)"...

  19. JLF Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    jlf forms JLF Forms JLF Target Fab Request JLF Experiment Worksheet JLF-Experimental Team Registration Form JLF-LLNL Participant Registration Form JLF-External Participant Registration Form JLF-Debriefing Form

  20. Software Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software Tools Software Tools Copyright materials are released under different mechanisms: Open Source Software and Portfolio Software. CONTACT thumbnail of Kathleen McDonald Head ...

  1. Development Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    More Python Tools Python is an interpreted, general-purpose high-level programming language that is usually accompanied by a variety of useful tools for scientific programming...

  2. Method for forming materials

    DOE Patents [OSTI]

    Tolle, Charles R.; Clark, Denis E.; Smartt, Herschel B.; Miller, Karen S.

    2009-10-06

    A material-forming tool and a method for forming a material are described including a shank portion; a shoulder portion that releasably engages the shank portion; a pin that releasably engages the shoulder portion, wherein the pin defines a passageway; and a source of a material coupled in material flowing relation relative to the pin and wherein the material-forming tool is utilized in methodology that includes providing a first material; providing a second material, and placing the second material into contact with the first material; and locally plastically deforming the first material with the material-forming tool so as mix the first material and second material together to form a resulting material having characteristics different from the respective first and second materials.

  3. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","New Hampshire Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic ...

  4. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Data for" ,"Data 1","Kansas Natural Gas in Underground Storage ... 6:59:57 AM" "Back to Contents","Data 1: Kansas Natural Gas in Underground Storage ...

  5. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Data for" ,"Data 1","Nevada Nonhydrocarbon Gases Removed from Natural ... 1:08:57 AM" "Back to Contents","Data 1: Nevada Nonhydrocarbon Gases Removed from Natural ...

  6. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Consumed" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","District of Columbia Heat Content ...

  7. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click ... Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","32016" ,"Release ...

  8. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Data for" ,"Data 1","Minnesota Natural Gas Injections into Underground ... 7:00:26 AM" "Back to Contents","Data 1: Minnesota Natural Gas Injections into Underground ...

  9. Enrollment Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Enrollment Tools Enrollment Tools A comprehensive benefits package with plan options for health care and retirement to take care of our employees today and tomorrow. Contacts Benefits Office (505) 667-1806 Email Enrollment Tools New Hire Benefits Checklist (pdf) New Hire Enrollment Tool (xls

  10. Microsoft Word - LANL SCI CLEARANCE REQUEST FORM.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    classified information. Do not use MAC Preview tool to complete this form as the tool causes data corruption issues. Submit completed form and your IGPPS proposal to...

  11. Visual Analysis of Weblog Content

    SciTech Connect (OSTI)

    Gregory, Michelle L.; Payne, Deborah A.; McColgin, Dave; Cramer, Nick O.; Love, Douglas V.

    2007-03-26

    In recent years, one of the advances of the World Wide Web is social media and one of the fastest growing aspects of social media is the blogosphere. Blogs make content creation easy and are highly accessible through web pages and syndication. With their growing influence, a need has arisen to be able to monitor the opinions and insight revealed within their content. In this paper we describe a technical approach for analyzing the content of blog data using a visual analytic tool, IN-SPIRE, developed by Pacific Northwest National Laboratory. We highlight the capabilities of this tool that are particularly useful for information gathering from blog data.

  12. Online Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Microfabrication | Safety Online Forms, Guidelines & Policies Questions of How to Get Started? - Click here! User Forms: Beamtime Request Form - pdf CAMD Gas Cylinder Request Form - pdf Compressed Gas Purchase Order - pdf Exposure Request Form - pdf (How To Fill the Exposure Request Form?) Format for Annual User Reports - pdf Microfabrication Project Proposal Form - pdf Synchrotron Project Proposal Form - pdf Registration & Test Application for Facility Access & Radiation Badge - pdf

  13. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    ,,"(202) 586-8800",,,"5302016 7:40:48 PM" "Back to Contents","Data 1: Crude Oil Production" "Sourcekey","MCRFPUS1","MCRFPP11","MCRFPFL1","MCRFPNY1","MCRFPPA1","MCRFPVA1","M...

  14. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    ,,"(202) 586-8800",,,"5302016 7:40:48 PM" "Back to Contents","Data 1: Crude Oil Production" "Sourcekey","MCRFPUS2","MCRFPP12","MCRFPFL2","MCRFPNY2","MCRFPPA2","MCRFPVA2","M...

  15. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    ,,"(202) 586-8800",,,"5302016 7:40:47 PM" "Back to Contents","Data 1: Crude Oil Production" "Sourcekey","MCRFPUS1","MCRFPP11","MCRFPFL1","MCRFPNY1","MCRFPPA1","MCRFPVA1","M...

  16. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Data for" ,"Data 1","Kansas Natural Gas Gross Withdrawals from Oil ... 7:01:28 AM" "Back to Contents","Data 1: Kansas Natural Gas Gross Withdrawals from Oil ...

  17. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Data for" ,"Data 1","Kansas Natural Gas Gross Withdrawals from Gas ... 7:01:18 AM" "Back to Contents","Data 1: Kansas Natural Gas Gross Withdrawals from Gas ...

  18. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    AM" "Back to Contents","Data 1: Price of Liquefied U.S. Natural Gas Re-Exports to Brazil (Dollars per Thousand Cubic Feet)" "Sourcekey","NGMEPG0ERENUS-NBRDMCF"...

  19. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Data for" ,"Data 1","Nevada Natural Gas Gross Withdrawals from Gas ... 1:07:58 AM" "Back to Contents","Data 1: Nevada Natural Gas Gross Withdrawals from Gas ...

  20. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Data for" ,"Data 1","Nevada Natural Gas Withdrawals from Oil Wells ... 1:08:20 AM" "Back to Contents","Data 1: Nevada Natural Gas Withdrawals from Oil Wells ...

  1. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Data for" ,"Data 1","Nevada Natural Gas Deliveries to Electric Power ... 1:03:28 AM" "Back to Contents","Data 1: Nevada Natural Gas Deliveries to Electric Power ...

  2. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Data for" ,"Data 1","Nevada Price of Natural Gas Sold to Commercial ... 1:00:55 AM" "Back to Contents","Data 1: Nevada Price of Natural Gas Sold to Commercial ...

  3. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Data for" ,"Data 1","Motor Gasoline Sales to End Users Prices ... 8:28:36 AM" "Back to Contents","Data 1: Motor Gasoline Sales to End Users Prices " ...

  4. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    ...,"Energy Information Administration" ,"For Help, Contact:","infoctr@eia.gov" ,,"(202) 586-8800",,,"4292016 6:42:48 AM" "Back to Contents","Data 1: U.S. LNG Imports from Indonesia ...

  5. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Data for" ,"Data 1","Residual Fuel Oil Prices, Average - Sales to End Users ... AM" "Back to Contents","Data 1: Residual Fuel Oil Prices, Average - Sales to End Users " ...

  6. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    AM" "Back to Contents","Data 1: Price of Liquefied U.S. Natural Gas Re-Exports to Spain (Dollars per Thousand Cubic Feet)" "Sourcekey","NGMEPG0ERENUS-NSPDMCF"...

  7. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    "Back to Contents","Data 1: East Coast (PADD 1) Net Receipts of Crude Oil and Petroleum Products by Pipeline, Tanker, Barge and Rail" "Sourcekey","MTTNRP11","MCRNRP11","MPEMNP11...

  8. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    "Back to Contents","Data 1: Price of Liquefied U.S. Natural Gas Exports by Vessel to Japan (Dollars per Thousand Cubic Feet)" "Sourcekey","NGMEPG0EVENUS-NJADMCF"...

  9. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    AM" "Back to Contents","Data 1: Liquefied U.S. Natural Gas Exports by Vessel to Japan (Million Cubic Feet)" "Sourcekey","NGMEPG0EVENUS-NJAMMCF" "Date","Liquefied U.S....

  10. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    AM" "Back to Contents","Data 1: Price of Liquefied U.S. Natural Gas Re-Exports to Japan (Dollars per Thousand Cubic Feet)" "Sourcekey","NGMEPG0ERENUS-NJADMCF"...

  11. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    AM" "Back to Contents","Data 1: Price of Liquefied U.S. Natural Gas Re-Exports to Chile (Dollars per Thousand Cubic Feet)" "Sourcekey","NGMEPG0ERENUS-NCIDMCF"...

  12. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Data for" ,"Data 1","Crude Oil (Light-Sweet, Cushing, Oklahoma)",4,"Daily","726... to Contents","Data 1: Crude Oil (Light-Sweet, Cushing, Oklahoma)" "Sourcekey","RCLC1","...

  13. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Data for" ,"Data 1","Minnesota Price of Natural Gas Sold to Commercial ... 6:57:30 AM" "Back to Contents","Data 1: Minnesota Price of Natural Gas Sold to Commercial ...

  14. Percussion tool

    DOE Patents [OSTI]

    Reed, Teddy R.

    2006-11-28

    A percussion tool is described and which includes a housing mounting a tool bit; a reciprocally moveable hammer borne by the housing and which is operable to repeatedly strike the tool bit; and a reciprocally moveable piston enclosed within the hammer and which imparts reciprocal movement to the reciprocally moveable hammer.

  15. Time Ordered Astrophysics Scalable Tools

    Energy Science and Technology Software Center (OSTI)

    2011-12-14

    This software package provides tools for astrophysical experiments which record data in the form of individual time streams from discrete detectors. TOAST provides tools from meta-data manipulation and job set up, I/O operation, telescope pointing reconstruction, and map-making. It also provides tools for constructing simulated observations.

  16. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Alaska Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  17. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Alabama Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  18. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Arkansas Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  19. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Arizona Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  20. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","California Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  1. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Colorado Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  2. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","District of Columbia Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next

  3. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Delaware Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  4. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Florida Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  5. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Georgia Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  6. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Hawaii Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  7. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Iowa Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  8. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Idaho Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  9. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Illinois Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  10. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Kansas Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  11. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Louisiana Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  12. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Massachusetts Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  13. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Maryland Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  14. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Michigan Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  15. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Minnesota Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  16. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Missouri Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  17. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Mississippi Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  18. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Montana Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  19. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","North Carolina Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  20. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","North Dakota Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  1. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Nebraska Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  2. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","New Jersey Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  3. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","New Mexico Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  4. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Nevada Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  5. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","New York Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  6. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Ohio Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  7. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Oklahoma Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  8. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Oregon Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  9. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Pennsylvania Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  10. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Rhode Island Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  11. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","South Carolina Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  12. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","South Dakota Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  13. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Tennessee Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  14. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Texas Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  15. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Utah Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  16. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Virginia Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  17. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Vermont Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  18. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Washington Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  19. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Wisconsin Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  20. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","West Virginia Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  1. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Wyoming Heat Content of Natural Gas Deliveries to Consumers (BTU per Cubic Foot)",1,"Monthly","6/2016" ,"Release Date:","08/31/2016" ,"Next Release

  2. Double diameter boring tool

    DOE Patents [OSTI]

    Ashbaugh, Fred N.; Murry, Kenneth R.

    1988-12-27

    A boring tool and a method of operation are provided for boring two concentric holes of precision diameters and depths in a single operation. The boring tool includes an elongated tool body, a shank for attachment to a standard adjustable boring head which is used on a manual or numerical control milling machine and first and second diametrically opposed cutting edges formed for cutting in opposite directions. The diameter of the elongated tool body is substantially equal to the distance from the first cutting edge tip to the axis of rotation plus the distance from the second cutting edge tip to the axis of rotation. The axis of rotation of the tool is spaced from the tool centerline a distance substantially equal to one-half the distance from the second cutting edge tip to the axis of rotation minus one-half the distance from the first cutting edge tip to the axis of rotation. The method includes the step of inserting the boring tool into the boring head, adjusting the distance between the tool centerline and the tool axis of rotation as described above and boring the two concentric holes.

  3. Double diameter boring tool

    DOE Patents [OSTI]

    Ashbaugh, F.A.; Murry, K.R.

    1986-02-10

    A boring tool and a method of operation are provided for boring two concentric holes of precision diameters and depths in a single operation. The boring tool includes an elongated tool body, a shank for attachment to a standard adjustable boring head which is used on a manual or numerical control milling machine and first and second diametrically opposed cutting flutes formed for cutting in opposite directions. The diameter of the elongated tool body is substantially equal to the distance from the first flute tip to the axis of rotation plus the distance from the second flute tip to the axis of rotation. The axis of rotation of the tool is spaced from the tool centerline a distance substantially equal to one-half the distance from the second flute tip to the axis of rotation minus one-half the distance from the first flute tip to the axis of rotation. The method includes the step of inserting the boring tool into the boring head, adjusting the distance between the tool centerline and the tool axis of rotation as described above and boring the two concentric holes.

  4. Workbook Contents

    U.S. Energy Information Administration (EIA) Indexed Site

    Contents","Data 1: U.S., PAD Districts, and States" "Sourcekey","8NA8O0NUSC","8NA8O0R10C","8NA8O0SDEC","8NA8O0SFLC","8NA8O0SGAC","8NA8O0SMDC","8NA8O0SN...

  5. Wafer handling and placement tool

    DOE Patents [OSTI]

    Witherspoon, Linda L.

    1988-01-05

    A spring arm tool is provided for clamp engaging and supporting wafers while the tool is hand held. The tool includes a pair of relatively swingable jaw element supporting support arms and the jaw elements are notched to enjoy multiple point contact with a wafer peripheral portion. Also, one disclosed form of the tool includes remotely operable workpiece ejecting structure carried by the jaw elements thereof.

  6. Research Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software & Tools Development Network R&D Software-Defined Networking (SDN) Experimental Network Testbeds Performance (perfSONAR) Software & Tools Development Data for Researchers Partnerships Publications Workshops Contact Us Technical Assistance: 1 800-33-ESnet (Inside US) 1 800-333-7638 (Inside US) 1 510-486-7600 (Globally) 1 510-486-7607 (Globally) Report Network Problems: trouble@es.net Provide Web Site Feedback: info@es.net Software & Tools Development Over the years, ESnet

  7. Channel nut tool

    DOE Patents [OSTI]

    Olson, Marvin

    2016-01-12

    A method, system, and apparatus for installing channel nuts includes a shank, a handle formed on a first end of a shank, and an end piece with a threaded shaft configured to receive a channel nut formed on the second end of the shaft. The tool can be used to insert or remove a channel nut in a channel framing system and then removed from the channel nut.

  8. Secure content objects

    DOE Patents [OSTI]

    Evans, William D.

    2009-02-24

    A secure content object protects electronic documents from unauthorized use. The secure content object includes an encrypted electronic document, a multi-key encryption table having at least one multi-key component, an encrypted header and a user interface device. The encrypted document is encrypted using a document encryption key associated with a multi-key encryption method. The encrypted header includes an encryption marker formed by a random number followed by a derivable variation of the same random number. The user interface device enables a user to input a user authorization. The user authorization is combined with each of the multi-key components in the multi-key encryption key table and used to try to decrypt the encrypted header. If the encryption marker is successfully decrypted, the electronic document may be decrypted. Multiple electronic documents or a document and annotations may be protected by the secure content object.

  9. Software Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software Tools Software Tools Copyright materials are released under different mechanisms: Open Source Software and Portfolio Software. CONTACT thumbnail of Kathleen McDonald Head of Intellectual Property, Business Development Executive Kathleen McDonald Richard P. Feynman Center for Innovation (505) 665-9090 Email The Richard P. Feynman Center for Innovation (FCI) releases copyright materials from Los Alamos under different mechanisms. Open Source Software GitHub Explore all open source

  10. Regulatory Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Regulatory Tools Home CRA - 2004 Final Recertification Decision CRA Comments & Responses CCA - 1996 CRA CARDs & TSDs CCA CARDs & TSDs Regulatory Tools Title 40 CFR Part 191 Environmental Radiation Protection Standards for Management and Disposal of Spent Nuclear Fuel, High-Level and Transuranic Radioactive Wastes. Title 40 CFR Part 194 Criteria for the Certification and Re-Certification of the Waste Isolation Pilot Plant's Compliance With the 40 CFR Part 191 Disposal Regulations.

  11. ARM - Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Send Forms To assist researchers in the conduct of field campaigns or required administrative procedures (such as Baseline Change Requests), we provide a number of...

  12. Form Approved

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    OGE Form 450, 5 CFR Part 2634, Subpart I U.S. Office of Government Ethics (January 2007) (Replaces September 2002 edition) Form Approved OMB NO. 3209-0006 CONFIDENTIAL FINANCIAL DISCLOSURE REPORT Executive Branch Why Must I File? The duties and responsibilities of your position require you to file the Confidential Financial Disclosure Report to avoid involvement in a real or apparent conflict of interest. The purpose of this report is to assist employees and their agencies in avoiding conflicts

  13. Downhole tool

    DOE Patents [OSTI]

    Hall, David R.; Muradov, Andrei; Pixton, David S.; Dahlgren, Scott Steven; Briscoe, Michael A.

    2007-03-20

    A double shouldered downhole tool connection comprises box and pin connections having mating threads intermediate mating primary and secondary shoulders. The connection further comprises a secondary shoulder component retained in the box connection intermediate a floating component and the primary shoulders. The secondary shoulder component and the pin connection cooperate to transfer a portion of makeup load to the box connection. The downhole tool may be selected from the group consisting of drill pipe, drill collars, production pipe, and reamers. The floating component may be selected from the group consisting of electronics modules, generators, gyroscopes, power sources, and stators. The secondary shoulder component may comprises an interface to the box connection selected from the group consisting of radial grooves, axial grooves, tapered grooves, radial protrusions, axial protrusions, tapered protrusions, shoulders, and threads.

  14. RSP Tooling Technology

    SciTech Connect (OSTI)

    2001-11-20

    RSP Tooling{trademark} is a spray forming technology tailored for producing molds and dies. The approach combines rapid solidification processing and net-shape materials processing in a single step. The general concept involves converting a mold design described by a CAD file to a tooling master using a suitable rapid prototyping (RP) technology such as stereolithography. A pattern transfer is made to a castable ceramic, typically alumina or fused silica (Figure 1). This is followed by spray forming a thick deposit of a tooling alloy on the pattern to capture the desired shape, surface texture, and detail. The resultant metal block is cooled to room temperature and separated from the pattern. The deposit's exterior walls are machined square, allowing it to be used as an insert in a standard mold base. The overall turnaround time for tooling is about 3 to 5 days, starting with a master. Molds and dies produced in this way have been used in high volume production runs in plastic injection molding and die casting. A Cooperative Research and Development Agreement (CRADA) between the Idaho National Engineering and Environmental Laboratory (INEEL) and Grupo Vitro has been established to evaluate the feasibility of using RSP Tooling technology for producing molds and dies of interest to Vitro. This report summarizes results from Phase I of this agreement, and describes work scope and budget for Phase I1 activities. The main objective in Phase I was to demonstrate the feasibility of applying the Rapid Solidification Process (RSP) Tooling method to produce molds for the manufacture of glass and other components of interest to Vitro. This objective was successfully achieved.

  15. ProForm | Open Energy Information

    Open Energy Info (EERE)

    Spreadsheet ComplexityEase of Use: Simple Website: poet.lbl.govProform Cost: Free References: ProForm1 Related Tools General Equilibrium Modeling Package (GEMPACK)...

  16. Administrative Forms/Policies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Administrative Forms Microfab Project Proposal Form Exit Form After Hours Request Form

  17. CONSENT FORM

    Office of Legacy Management (LM)

    fly, zz--2 ~32n7 -3.27.2 / / . ' . 5" . CONSENT FORM Employees, contractor personnel, and agents of the U. S. Department of Energy are hereby given permission to enter upon the property described below in order to perform the radiation survey described in the attached letter dated . . June-11 , 1980. . . i Property Description: Staten Island Warehouse 2393 Richmond Terrace Port Richmond, New York ,Property identified as Block / j/ 0 ,i . Lot zG Name A Signature by owner(s) of property - or

  18. 2010 Solar Market Transformation Analysis and Tools | Open Energy...

    Open Energy Info (EERE)

    Image needs updating Reference needed Missing content Broken link Other Additional Comments Cancel Submit Categories: Tools Articles that incorporate public domain materials...

  19. Home Energy Score Data Collection Form | Department of Energy

    Energy Savers [EERE]

    Data Collection Form Home Energy Score Data Collection Form Input sheet for qualified assessors to collect data for input into the Home Energy Scoring Tool for evaluation. Data ...

  20. GlassForm

    Energy Science and Technology Software Center (OSTI)

    2011-09-16

    GlassForm is a software tool for generating preliminary waste glass formulas for a given waste stream. The software is useful because it reduces the number of verification melts required to develop a suitable additive composition. The software includes property models that calculate glass properties of interest from the chemical composition of the waste glass. The software includes property models for glass viscosity, electrical conductivity, glass transition temperature, and leach resistance as measured by the 7-daymore » product consistency test (PCT).« less

  1. Pneumatic soil removal tool

    DOE Patents [OSTI]

    Neuhaus, J.E.

    1992-10-13

    A soil removal tool is provided for removing radioactive soil, rock and other debris from the bottom of an excavation, while permitting the operator to be located outside of a containment for that excavation. The tool includes a fixed jaw, secured to one end of an elongate pipe, which cooperates with a movable jaw pivotably mounted on the pipe. Movement of the movable jaw is controlled by a pneumatic cylinder mounted on the pipe. The actuator rod of the pneumatic cylinder is connected to a collar which is slidably mounted on the pipe and forms part of the pivotable mounting assembly for the movable jaw. Air is supplied to the pneumatic cylinder through a handle connected to the pipe, under the control of an actuator valve mounted on the handle, to provide movement of the movable jaw. 3 figs.

  2. Pneumatic soil removal tool

    DOE Patents [OSTI]

    Neuhaus, John E.

    1992-01-01

    A soil removal tool is provided for removing radioactive soil, rock and other debris from the bottom of an excavation, while permitting the operator to be located outside of a containment for that excavation. The tool includes a fixed jaw, secured to one end of an elongate pipe, which cooperates with a movable jaw pivotably mounted on the pipe. Movement of the movable jaw is controlled by a pneumatic cylinder mounted on the pipe. The actuator rod of the pneumatic cylinder is connected to a collar which is slidably mounted on the pipe and forms part of the pivotable mounting assembly for the movable jaw. Air is supplied to the pneumatic cylinder through a handle connected to the pipe, under the control of an actuator valve mounted on the handle, to provide movement of the movable jaw.

  3. Fluid blade disablement tool

    DOE Patents [OSTI]

    Jakaboski, Juan-Carlos; Hughs, Chance G.; Todd, Steven N.

    2012-01-10

    A fluid blade disablement (FBD) tool that forms both a focused fluid projectile that resembles a blade, which can provide precision penetration of a barrier wall, and a broad fluid projectile that functions substantially like a hammer, which can produce general disruption of structures behind the barrier wall. Embodiments of the FBD tool comprise a container capable of holding fluid, an explosive assembly which is positioned within the container and which comprises an explosive holder and explosive, and a means for detonating. The container has a concavity on the side adjacent to the exposed surface of the explosive. The position of the concavity relative to the explosive and its construction of materials with thicknesses that facilitate inversion and/or rupture of the concavity wall enable the formation of a sharp and coherent blade of fluid advancing ahead of the detonation gases.

  4. Stack Trace Analysis Tool

    Energy Science and Technology Software Center (OSTI)

    2008-01-16

    STAT is a light weight debugging tool that gathers and merges stack traces from all of the processes in a parallel application. STAT uses the MRNet free based overlay network to broadcast commands from the tool front-end to the STAT daemons and for the front-end to gather the traces from the STAT daemons. As the traces propagate through the MRNet network tree, they are merged across all tasks to form a single call prefix tree.more » The call prefix tree can be examined to identify tasks with similar function call patterns and to delineate a small set of equivalence classes. A representative task from each of these classes can then be fed into a full feature debugger like TotalView for root cause analysis.« less

  5. Bonding Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Bonding Tools Bonding Tools Bonds are one of the most common forms of financing used by state and local governments, because they are a low-cost source of capital available to most entities. State and local officials may consider using bonds for a variety of clean energy purposes, including: Financing a specific set of energy upgrades in their own facilities (can be combined with an energy savings performance contract) Capitalizing finance programs (e.g., revolving loan fund) for public sector

  6. Collaboration Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Information Systems » Collaboration Tools Collaboration Tools Collaboration is much more than just sharing information. It is a form of teamwork and a process of exchanging ideas that positively impacts progress. While it is relatively easy to collaborate with your peers in the office, effective collaboration is difficult to achieve within distributed teams without use of technology. In order to bridge the distance between project teams, Office of Project Management Oversight & Assessments

  7. Directory of Energy Data Collection Forms: Forms in use as of October 1996

    SciTech Connect (OSTI)

    1996-12-01

    This is the twentieth edition of the Directory of Energy Collection Data Forms, an authoritative listing of selected public use forms currently used as basic energy information gathering tools by the Department of Energy.

  8. Method of determining a content of a nuclear waste container

    DOE Patents [OSTI]

    Bernardi, Richard T.; Entwistle, David

    2003-04-22

    A method and apparatus are provided for identifying contents of a nuclear waste container. The method includes the steps of forming an image of the contents of the container using digital radiography, visually comparing contents of the image with expected contents of the container and performing computer tomography on the container when the visual inspection reveals an inconsistency between the contents of the image and the expected contents of the container.

  9. Fluid sampling tool

    DOE Patents [OSTI]

    Garcia, A.R.; Johnston, R.G.; Martinez, R.K.

    1999-05-25

    A fluid sampling tool is described for sampling fluid from a container. The tool has a fluid collecting portion which is drilled into the container wall, thereby affixing it to the wall. The tool may have a fluid extracting section which withdraws fluid collected by the fluid collecting section. The fluid collecting section has a fluted shank with an end configured to drill a hole into a container wall. The shank has a threaded portion for tapping the borehole. The shank is threadably engaged to a cylindrical housing having an inner axial passageway sealed at one end by a septum. A flexible member having a cylindrical portion and a bulbous portion is provided. The housing can be slid into an inner axial passageway in the cylindrical portion and sealed to the flexible member. The bulbous portion has an outer lip defining an opening. The housing is clamped into the chuck of a drill, the lip of the bulbous section is pressed against a container wall until the shank touches the wall, and the user operates the drill. Wall shavings (kerf) are confined in a chamber formed in the bulbous section as it folds when the shank advances inside the container. After sufficient advancement of the shank, an o-ring makes a seal with the container wall. 6 figs.

  10. Frequency Response Analysis Tool

    SciTech Connect (OSTI)

    Etingov, Pavel V.; Kosterev, Dmitry; Dai, T.

    2014-12-31

    Frequency response has received a lot of attention in recent years at the national level, which culminated in the development and approval of North American Electricity Reliability Corporation (NERC) BAL-003-1 Frequency Response and Frequency Bias Setting Reliability Standard. This report is prepared to describe the details of the work conducted by Pacific Northwest National Laboratory (PNNL) in collaboration with the Bonneville Power Administration and Western Electricity Coordinating Council (WECC) Joint Synchronized Information Subcommittee (JSIS) to develop a frequency response analysis tool (FRAT). The document provides the details on the methodology and main features of the FRAT. The tool manages the database of under-frequency events and calculates the frequency response baseline. Frequency response calculations are consistent with frequency response measure (FRM) in NERC BAL-003-1 for an interconnection and balancing authority. The FRAT can use both phasor measurement unit (PMU) data, where available, and supervisory control and data acquisition (SCADA) data. The tool is also capable of automatically generating NERC Frequency Response Survey (FRS) forms required by BAL-003-1 Standard.

  11. Fluid sampling tool

    DOE Patents [OSTI]

    Garcia, Anthony R.; Johnston, Roger G.; Martinez, Ronald K.

    1999-05-25

    A fluid sampling tool for sampling fluid from a container. The tool has a fluid collecting portion which is drilled into the container wall, thereby affixing it to the wall. The tool may have a fluid extracting section which withdraws fluid collected by the fluid collecting section. The fluid collecting section has a fluted shank with an end configured to drill a hole into a container wall. The shank has a threaded portion for tapping the borehole. The shank is threadably engaged to a cylindrical housing having an inner axial passageway sealed at one end by a septum. A flexible member having a cylindrical portion and a bulbous portion is provided. The housing can be slid into an inner axial passageway in the cylindrical portion and sealed to the flexible member. The bulbous portion has an outer lip defining an opening. The housing is clamped into the chuck of a drill, the lip of the bulbous section is pressed against a container wall until the shank touches the wall, and the user operates the drill. Wall shavings (kerf) are confined in a chamber formed in the bulbous section as it folds when the shank advances inside the container. After sufficient advancement of the shank, an o-ring makes a seal with the container wall.

  12. SWS Online Tool now includes Multifamily Content, plus a How...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Amanda Evans of New Mexico Energymart Academy (NMEA) will share some of the unique training activities she has developed based on the SWS. Additionally, Josh Olsen from DOE will ...

  13. Use Release Instruction form in Site Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Release 77 TABLE OF CONTENTS September 23, 2015 Rev 1 Page 1 MAIN TABLE OF CONTENTS Effective Date 1.0 INTRODUCTION 042414 2.0 RESPONSIBILITIES 092315 3.0 CRITICAL, SPECIAL,...

  14. APPENDIX A: Forms and Instructions Form Form R93D-44 Form R93D...

    U.S. Energy Information Administration (EIA) Indexed Site

    and Instructions Form Form R93D-44 Form R93D-03 Form R93D-59 Instructions Form RT94-02 Form RT94-04 Form RT94-0 Form RT94-03 Form RT94-05 Form RT94-06 Instructions Form...

  15. Prioritization Tool Measurement Input Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    & Publications Austin Energy Data Dashboard Massachusetts -- SEP Data Dashboard Phoenix, Arizona Data Dashboard Buildings Home About Emerging Technologies Residential...

  16. Text-Alternative Version of Building America Webinar: Put New Tools and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Content on the Building America Solution Center | Department of Energy Put New Tools and Content on the Building America Solution Center Text-Alternative Version of Building America Webinar: Put New Tools and Content on the Building America Solution Center Building America: Put New Tools and Content on the Building America Solution Center to Work for You! July 22, 2015 Chrissi Antonopoulos, Energy Research Scientist, Pacific Northwest National Laboratory Michael Baechler, Senior Program

  17. Densified waste form and method for forming

    SciTech Connect (OSTI)

    Garino, Terry J.; Nenoff, Tina M.; Sava Gallis, Dorina Florentina

    2015-08-25

    Materials and methods of making densified waste forms for temperature sensitive waste material, such as nuclear waste, formed with low temperature processing using metallic powder that forms the matrix that encapsulates the temperature sensitive waste material. The densified waste form includes a temperature sensitive waste material in a physically densified matrix, the matrix is a compacted metallic powder. The method for forming the densified waste form includes mixing a metallic powder and a temperature sensitive waste material to form a waste form precursor. The waste form precursor is compacted with sufficient pressure to densify the waste precursor and encapsulate the temperature sensitive waste material in a physically densified matrix.

  18. Densified waste form and method for forming

    DOE Patents [OSTI]

    Garino, Terry J.; Nenoff, Tina M.; Sava Gallis, Dorina Florentina

    2016-05-17

    Materials and methods of making densified waste forms for temperature sensitive waste material, such as nuclear waste, formed with low temperature processing using metallic powder that forms the matrix that encapsulates the temperature sensitive waste material. The densified waste form includes a temperature sensitive waste material in a physically densified matrix, the matrix is a compacted metallic powder. The method for forming the densified waste form includes mixing a metallic powder and a temperature sensitive waste material to form a waste form precursor. The waste form precursor is compacted with sufficient pressure to densify the waste precursor and encapsulate the temperature sensitive waste material in a physically densified matrix.

  19. AIRMaster+ LogTool

    Broader source: Energy.gov [DOE]

    The AIRMaster+ LogTool is a companion tool to AIRMaster+ that helps industrial users determine the operating dynamics of a compressed system. Use the LogTool first to gather critical data in...

  20. Preset pivotal tool holder

    DOE Patents [OSTI]

    Asmanes, Charles

    1979-01-01

    A tool fixture is provided for precise pre-alignment of a radiused edge cutting tool in a tool holder relative to a fixed reference pivot point established on said holder about which the tool holder may be selectively pivoted relative to the fixture base member to change the contact point of the tool cutting edge with a workpiece while maintaining the precise same tool cutting radius relative to the reference pivot point.

  1. Software and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software and Tools Software and Tools The table below shows the software installed on Euclid that is managed by modules. Package Category Version Module Install Date Date Made ...

  2. Treatment Deployment Evaluation Tool

    SciTech Connect (OSTI)

    Rynearson, Michael Ardel; Plum, Martin Michael

    1999-08-01

    The U.S. Department of Energy (DOE) is responsible for the final disposition of legacy spent nuclear fuel (SNF). As a response, DOE's National Spent Nuclear Fuel Program (NSNFP) has been given the responsibility for the disposition of DOE -owned SNF. Many treatment technologies have been identified to treat some forms of SNF so that the resulting treated product is acceptable by the disposition site. One of these promising treatment processes is the electrometallurgical treatment (EMT) currently in development; a second is an Acid Wash Decladding process. The NSNFP has been tasked with identifying possible strategies for the deployment of these treatment processes in the event that the treatment path is deemed necessary. To support the siting studies of these strategies, economic evaluations are being performed to identify the least-cost deployment path. This model (tool) was developed to consider the full scope of costs, technical feasibility, process material disposition, and schedule attributes over the life of each deployment alternative. Using standard personal computer (PC) software, the model was developed as a comprehensive technology economic assessment tool using a Life-Cycle Cost (LCC) analysis methodology. Model development was planned as a systematic, iterative process of identifying and bounding the required activities to dispose of SNF. To support the evaluation process, activities are decomposed into lower level, easier to estimate activities. Sensitivity studies can then be performed on these activities, defining cost issues and testing results against the originally stated problem.

  3. CONTENT MODEL HOW-TO

    Energy Science and Technology Software Center (OSTI)

    003241MLTPL00 Content Model Guidelines  https://github.com/usgin/usginspecs/wiki/Content-Model-Guidelines 

  4. Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Information Resources » Tools Tools Below are links to tools that assist users with project planning and analysis. Spectrally Enhanced Lighting Spectrally Enhanced Lighting (SEL) is a cost-effective, low-risk design method for achieving significant energy savings by shifting lamp color from the warmer to the cooler (whiter) end of the color spectrum, more closely matching daylight. Residential Lighting Usage Estimate Tool The Residential Lighting Usage Estimate Tool is a companion to the

  5. Performance and Debugging Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tools Performance and Debugging Tools NERSC provides many popular debugging and profiling tools. Some of them are general-purpose tools and others are geared toward more specific tasks. A quick guideline on when to use which debugging tool is as follows: DDT and TotalView: general purpose parallel debuggers allowing users to interactively control the pace of execution of a program using a graphical user interface gdb: serial command line mode debugger; can be useful in quickly examining core

  6. Interactive Activity Detection Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Activity Detection Tools Interactive Activity Detection Tools Tools for detecting specified activities in video data provide a key intelligence capability. High numbers of false alarms, however, reduce tool effectiveness and analyst patience. User feedback reduces false alarms * This project will reduce the number of false alarms generated by activity detection tools (including single vehicle start / stop, multi-vehicle meetings and coordinated driving patterns) by exploiting user feedback in a

  7. CS2SAT Desktop Tool

    Energy Science and Technology Software Center (OSTI)

    2006-03-15

    The Idaho National Laboratory (INL) has developed a Control System Cyber Security Self-Assessment Tool (CS2SAT) desktop tool that provides a repeatable and systematic approach for control system users to assess the cyber security posture of their control system networks. The tool assists users in identifying the cyber security parameters of their systems and then offers security objectives, in the form of requirements, for improving the security of their specific network. Each requirement is linked tomore » a series of associated recommendations for compliance dependent upon the desired level of security protection. Each requirement is supported by links to the original standards document and recommendations are supported by links to whitepapers and other help documents. Package also includes two back-end supporting codes: CS2SAT Requirements Matrix and Control System Security Information System.« less

  8. EISA 432 Energy Audits Best Practices: Software Tools

    SciTech Connect (OSTI)

    Maryl Fisher

    2014-11-01

    Five whole building analysis software tools that can aid an energy manager with fulfilling energy audit and commissioning/retro-commissioning requirements were selected for review in this best practices study. A description of each software tool is provided as well as a discussion of the user interface and level of expertise required for each tool, a review of how to use the tool for analyzing energy conservation opportunities, the format and content of reports generated by the tool, and a discussion on the applicability of the tool for commissioning.

  9. Directory of Energy Data Collection Forms: Forms in use as of October 1993

    SciTech Connect (OSTI)

    Not Available

    1993-12-28

    This is the seventeenth edition of the Directory of Energy Data Collection forms, an authoritative listing of selected public use forms currently used as basic energy information gathering tools by the Department of Energy (DOE). Originally entitled EIA Data Collection forms, this directory provides an overview of DOE`s energy information collection programs for decisionmakers in Government and industry.

  10. CRA Content and Structure

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Home CRA - 2004 Final Recertification Decision CRA Comments & Responses CCA - 1996 CRA CARDs & TSDs CCA CARDs & TSDs Regulatory Tools

  11. Forms | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Forms Forms Computer Keyboard Keyboard DOE Forms DOE's forms are developed within the Department and approved by the DOE Forms Manager. The forms provided (below) are designed to serve the needs of two (or more) DOE Headquarters or field organizations. (You must have Adobe Acrobat(R) Reader to view and print the below files. Fillable forms are identified by the "fillable" icon, and require the full version of Adobe Acrobat software.) Forms by Subject Forms by Number Management &

  12. Fermilab Today - Related Content

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Related Content Subscribe | Contact Fermilab Today | Archive | Classifieds Search GO Classifieds Director's Corner Physics in a Nutshell Frontier Science Result Tip of the Week...

  13. Forms | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Forms Forms The following interactive Web-based forms in Adobe Acrobat Portable Document Format (PDF) are designed for online completion with Acrobat Reader. Input data will ...

  14. System and method for accumulative double sided incremental forming

    DOE Patents [OSTI]

    Cao, Jian; Malhotra, Rajiv

    2015-10-27

    A forming system includes first and second tools, moving assemblies, and a control unit. The moving assemblies move the first tool and the second tool relative to the sheet. The control unit is configured to control movement of the first tool and the second tool by the one or more moving assemblies by moving at least one of the first tool or the second tool in a first deformation direction to deform the sheet, then moving the first and second tools laterally relative to the sheet to a subsequent location while engaging the sheet, then moving at least one of the first tool or the second tool in the first deformation direction or an opposite second deformation direction to deform the sheet, and then continue moving the first and second tools to deform the sheet in order to create a three-dimensional component from the sheet.

  15. Improved tool grinding machine

    DOE Patents [OSTI]

    Dial, C.E. Sr.

    The present invention relates to an improved tool grinding mechanism for grinding single point diamond cutting tools to precise roundness and radius specifications. The present invention utilizes a tool holder which is longitudinally displaced with respect to the remainder of the grinding system due to contact of the tool with the grinding surface with this displacement being monitored so that any variation in the grinding of the cutting surface such as caused by crystal orientation or tool thicknesses may be compensated for during the grinding operation to assure the attainment of the desired cutting tool face specifications.

  16. Tool grinding machine

    DOE Patents [OSTI]

    Dial, Sr., Charles E.

    1980-01-01

    The present invention relates to an improved tool grinding mechanism for grinding single point diamond cutting tools to precise roundness and radius specifications. The present invention utilizes a tool holder which is longitudinally displaced with respect to the remainder of the grinding system due to contact of the tool with the grinding surface with this displacement being monitored so that any variation in the grinding of the cutting surface such as caused by crystal orientation or tool thickness may be compensated for during the grinding operation to assure the attainment of the desired cutting tool face specifications.

  17. TABLE OF CONTENTS

    National Nuclear Security Administration (NNSA)

    AC05-00OR22800 TABLE OF CONTENTS Contents Page # TOC - i SECTION A - SOLICITATION/OFFER AND AWARD ......................................................................... A-i SECTION B - SUPPLIES OR SERVICES AND PRICES/COSTS ........................................................ B-i B.1 SERVICES BEING ACQUIRED ....................................................................................B-2 B.2 TRANSITION COST, ESTIMATED COST, MAXIMUM AVAILABLE FEE, AND AVAILABLE FEE (Modification 295,

  18. Science Brief Submission Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Science Brief Submission Form Science Brief Submission Form Print Tuesday, 01 May 2007 00:00 Loading... < Prev

  19. Removal of introduced inorganic content from chipped forest residues via air classification

    SciTech Connect (OSTI)

    Lacey, Jeffrey A.; Aston, John E.; Westover, Tyler L.; Cherry, Robert S.; Thompson, David N.

    2015-08-04

    Inorganic content in biomass decreases the efficiency of conversion processes, especially thermochemical conversions. The combined concentrations of specific ash forming elements are the primary attributes that cause pine residues to be considered a degraded energy conversion feedstock, as compared to clean pine. Air classification is a potentially effective and economical tool to isolate high inorganic content biomass fractions away from primary feedstock sources to reduce their ash content. In this work, loblolly pine forest residues were air classified into 10 fractions whose ash content and composition were measured. Ash concentrations were highest in the lightest fractions (5.8–8.5 wt%), and in a heavy fraction of the fines (8.9–15.1 wt%). The removal of fractions with high inorganic content resulted in a substantial reduction in the ash content of the remaining biomass in forest thinnings (1.69–1.07 wt%) and logging residues (1.09–0.68 wt%). These high inorganic content fractions from both forest residue types represented less than 7.0 wt% of the total biomass, yet they contained greater than 40% of the ash content by mass. Elemental analysis of the air classified fractions revealed the lightest fractions were comprised of high concentrations of soil elements (silicon, aluminum, iron, sodium, and titanium). However, the elements of biological origin including calcium, potassium, magnesium, sulfur, manganese, and phosphorous were evenly distributed throughout all air classified fractions, making them more difficult to isolate into fractions with high mineral concentrations. Under the conditions reported in this study, an economic analysis revealed air classification could be used for ash removal for as little as $2.23 per ton of product biomass. As a result, this study suggests air classification is a potentially attractive technology for the removal of introduced soil minerals from pine forest residues.

  20. Removal of introduced inorganic content from chipped forest residues via air classification

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Lacey, Jeffrey A.; Aston, John E.; Westover, Tyler L.; Cherry, Robert S.; Thompson, David N.

    2015-08-04

    Inorganic content in biomass decreases the efficiency of conversion processes, especially thermochemical conversions. The combined concentrations of specific ash forming elements are the primary attributes that cause pine residues to be considered a degraded energy conversion feedstock, as compared to clean pine. Air classification is a potentially effective and economical tool to isolate high inorganic content biomass fractions away from primary feedstock sources to reduce their ash content. In this work, loblolly pine forest residues were air classified into 10 fractions whose ash content and composition were measured. Ash concentrations were highest in the lightest fractions (5.8–8.5 wt%), and inmore » a heavy fraction of the fines (8.9–15.1 wt%). The removal of fractions with high inorganic content resulted in a substantial reduction in the ash content of the remaining biomass in forest thinnings (1.69–1.07 wt%) and logging residues (1.09–0.68 wt%). These high inorganic content fractions from both forest residue types represented less than 7.0 wt% of the total biomass, yet they contained greater than 40% of the ash content by mass. Elemental analysis of the air classified fractions revealed the lightest fractions were comprised of high concentrations of soil elements (silicon, aluminum, iron, sodium, and titanium). However, the elements of biological origin including calcium, potassium, magnesium, sulfur, manganese, and phosphorous were evenly distributed throughout all air classified fractions, making them more difficult to isolate into fractions with high mineral concentrations. Under the conditions reported in this study, an economic analysis revealed air classification could be used for ash removal for as little as $2.23 per ton of product biomass. As a result, this study suggests air classification is a potentially attractive technology for the removal of introduced soil minerals from pine forest residues.« less

  1. Software and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software and Tools Software and Tools The table below shows the software installed on Euclid that is managed by modules. Package Category Version Module Install Date Date Made Default Last edited: 2016-03-21 13:44:4

  2. ARM - Data Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govDataData Tools Data Tools Software for Working with ARM NetCDF Data Most ARM data are archived and made available as time-series data in netCDF format. NetCDF (designed by ...

  3. ARM - Data Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govData Tools Data Tools Software for Working with ARM NetCDF Data Most ARM data are archived and made available as time-series data in netCDF format. NetCDF (designed by Unidata) ...

  4. Rotary fast tool servo system and methods

    DOE Patents [OSTI]

    Montesanti, Richard C.; Trumper, David L.

    2007-10-02

    A high bandwidth rotary fast tool servo provides tool motion in a direction nominally parallel to the surface-normal of a workpiece at the point of contact between the cutting tool and workpiece. Three or more flexure blades having all ends fixed are used to form an axis of rotation for a swing arm that carries a cutting tool at a set radius from the axis of rotation. An actuator rotates a swing arm assembly such that a cutting tool is moved in and away from the lathe-mounted, rotating workpiece in a rapid and controlled manner in order to machine the workpiece. A pair of position sensors provides rotation and position information for a swing arm to a control system. A control system commands and coordinates motion of the fast tool servo with the motion of a spindle, rotating table, cross-feed slide, and in-feed slide of a precision lathe.

  5. Tool Gear Version 2.3

    Energy Science and Technology Software Center (OSTI)

    2011-12-05

    Tool Gear Version 2 is an expanded collection of programs and software libraries that form the infrastructure on which software tools may be built. The software tools help application developers understand the performance of the programs or help them find programming errors. Tool Gear includes components for gathering data from target programs, either through direct instrumentations or by parsing the output of third-party tools, transmitting the data to a databse, organizing and storing the data,more » presenting it through a variety of graphical interfaces. Tool Gear is designed to be an extensible system, so users can manage a variety of data and create new ways to present it. Too Gear is sesigned to work with both sequential and parallel programs on multiple computer platforms« less

  6. Caliper and contour tool

    DOE Patents [OSTI]

    Fink, Conrad F. (Los Alamos, NM)

    1981-01-01

    The disclosure relates to a tool for borehole logging comprising a plurality of extendable caliper arms to determine borehole contour.

  7. Caliper and contour tool

    DOE Patents [OSTI]

    Fink, C.F.

    The disclosure relates to a tool for borehole logging comprising a plurality of extendable caliper arms to determine borehole contour.

  8. Demand Response Dispatch Tool

    SciTech Connect (OSTI)

    2012-08-31

    The Demand Response (DR) Dispatch Tool uses price profiles to dispatch demand response resources and create load modifying profiles. These annual profiles are used as inputs to production cost models and regional planning tools (e.g., PROMOD). The tool has been effectively implemented in transmission planning studies conducted by the Western Electricity Coordinating Council via its Transmission Expansion Planning and Policy Committee. The DR Dispatch Tool can properly model the dispatch of DR resources for both reliability and economic conditions.

  9. OOTW COST TOOLS

    SciTech Connect (OSTI)

    HARTLEY, D.S.III; PACKARD, S.L.

    1998-09-01

    This document reports the results of a study of cost tools to support the analysis of Operations Other Than War (OOTW). It recommends the continued development of the Department of Defense (DoD) Contingency Operational Support Tool (COST) as the basic cost analysis tool for 00TWS. It also recommends modifications to be included in future versions of COST and the development of an 00TW mission planning tool to supply valid input for costing.

  10. Fluid sampling tool

    DOE Patents [OSTI]

    Garcia, Anthony R.; Johnston, Roger G.; Martinez, Ronald K.

    2000-01-01

    A fluid-sampling tool for obtaining a fluid sample from a container. When used in combination with a rotatable drill, the tool bores a hole into a container wall, withdraws a fluid sample from the container, and seals the borehole. The tool collects fluid sample without exposing the operator or the environment to the fluid or to wall shavings from the container.

  11. A simple tool for estimating city-wide annual electrical energy...

    Office of Scientific and Technical Information (OSTI)

    A simple tool for estimating city-wide annual electrical energy savings from cooler surfaces Citation Details In-Document Search This content will become publicly available on ...

  12. Content Model Guidelines

    Energy Science and Technology Software Center (OSTI)

    2013-08-01

    This wiki page provides the public with all specifications needed to create a new spreadsheet (workbook) implementation of an information exchange, so that it conforms and functions properly with NGDS validation tools.

  13. Tool setting device

    DOE Patents [OSTI]

    Brown, Raymond J.

    1977-01-01

    The present invention relates to a tool setting device for use with numerically controlled machine tools, such as lathes and milling machines. A reference position of the machine tool relative to the workpiece along both the X and Y axes is utilized by the control circuit for driving the tool through its program. This reference position is determined for both axes by displacing a single linear variable displacement transducer (LVDT) with the machine tool through a T-shaped pivotal bar. The use of the T-shaped bar allows the cutting tool to be moved sequentially in the X or Y direction for indicating the actual position of the machine tool relative to the predetermined desired position in the numerical control circuit by using a single LVDT.

  14. TABLE OF CONTENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3, Revision 0 i TABLE OF CONTENTS 1.0 Summary .............................................................................................................................. 1 2.0 Introduction .......................................................................................................................... 1 3.0 Discussion ............................................................................................................................ 4 3.1 Selection of Tanks for Level Decrease

  15. TABLE OF CONTENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4, Revision 0 i TABLE OF CONTENTS 1.0 Summary .............................................................................................................................. 1 2.0 Introduction .......................................................................................................................... 1 3.0 Discussion ............................................................................................................................ 4 3.1 Selection of Tanks for Level Decrease

  16. TABLE OF CONTENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5, Revision 0 i TABLE OF CONTENTS 1.0 Summary .............................................................................................................................. 1 2.0 Introduction .......................................................................................................................... 1 3.0 Discussion ............................................................................................................................ 4 3.1 Selection of Tanks for Level Decrease

  17. Contents.key

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Paul Clavin Contents Combustion Waves and Fronts in Flows P. Clavin and G. Searby Cambridge University Press (to appear) Orders of magnitude 2 Lecture 1: 1-1: Overall...

  18. TABLE OF CONTENTS

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    008 High Temperature Superconductivity for Electric Systems Peer Review Final Report i TABLE OF CONTENTS High Temperature Superconductivity for Electric Systems Program Overview ...... 1 The Peer Review................................................................................................................ 3 Review Criteria ................................................................................................................. 5 Guidelines

  19. Table_of_Contents

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Table of Contents 1. Physical Security .............................................................................................................................. 1-1 101. Headquarters Security Badges ........................................................................................ 101-1 102. HSPD-12 Badges and the PIV Process ........................................................................... 102-1 103. Prohibited Articles

  20. TABLE OF CONTENTS

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    irecusa.org | LMI Guidelines | 0 www.irecusa.org | LMI Guidelines | i TABLE OF CONTENTS Executive Summary iv Content Overview vii Introduction 1 I. Identifying LMI Customers and Designing Facilities to Serve LMI Customers 5 A. LMI Customers 5 B. Designing Facilities to Serve LMI Customers 6 II. Barriers to Adoption and Opportunities for Engagement 11 A. Financial Barriers 11 B. Ownership Barriers and Split Incentives 14 C. Marketing, Education, and Outreach Barriers 15 D. Opportunities for

  1. Partnership Agreement Form

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    software tools, training webinars, technical guidance documents, and peer-to-peer networking opportunities Agreement: My organization is committed to continuous improvement in ...

  2. ARM - Ingest Readiness Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Engineering Home Workflow Graphic Engineering Workflow Document Tools for Workflow ECR ECO BCR Ingests Value-Added Products Reprocessing Instruments Data System Elements Field...

  3. Analysis Methods and Tools Standing Technical Committee Strategic Plan

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Analysis Methods and Tools Standing Technical Committee Strategic Plan - February 2012 Committee Chair: 2012 Ben Polly NREL 2/7/12 Committee Review DRAFT 2 Contents: 1. INTRODUCTION 1.1 Standing Technical Committee Strategic Plan Overview.......................................................................3 1.2 Prioritization of Gaps, Barriers and Needs...............................................................................................4 1.3 Summary of Analysis Methods and Tools STC

  4. Grinding tool for making hemispherical bores in hard materials

    DOE Patents [OSTI]

    Duran, E.L.

    1985-04-03

    A grinding tool for forming hemispherical bores in hard materials such as boron carbide. The tool comprises a hemicircular grinding bit, formed of a metal bond diamond matrix, which is mounted transversely on one end of a tubular tool shaft. The bit includes a spherically curved outer edge surface which is the active grinding surface of the tool. Two coolant fluid ports on opposite sides of the bit enable introduction of coolant fluid through the bore of the tool shaft so as to be emitted adjacent the opposite sides of the grinding bit, thereby providing optimum cooling of both the workpiece and the bit.

  5. Page 8, Benefit Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Form - 853 Kb - Allows an employee to enroll or waive health insurance coverage. SF-2817 - Life Insurance Election Form (Federal Employee Group Life Insurance) - 120 Kb - ...

  6. Form OE-417

    U.S. Energy Information Administration (EIA) Indexed Site

    Electricity Delivery and Energy Reliability Form OE-417 ELECTRIC EMERGENCY INCIDENT AND DISTURBANCE REPORT Form Approved OMB No. 1901-0288 Approval Expires 03312018 Burden Per...

  7. Alternative Fuels Data Center: Tools

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Tools to someone by E-mail Share Alternative Fuels Data Center: Tools on Facebook Tweet about Alternative Fuels Data Center: Tools on Twitter Bookmark Alternative Fuels Data Center: Tools on Google Bookmark Alternative Fuels Data Center: Tools on Delicious Rank Alternative Fuels Data Center: Tools on Digg Find More places to share Alternative Fuels Data Center: Tools on AddThis.com... Tools The Alternative Fuels Data Center offers a large collection of helpful tools. These calculators,

  8. Machine tool locator

    DOE Patents [OSTI]

    Hanlon, John A.; Gill, Timothy J.

    2001-01-01

    Machine tools can be accurately measured and positioned on manufacturing machines within very small tolerances by use of an autocollimator on a 3-axis mount on a manufacturing machine and positioned so as to focus on a reference tooling ball or a machine tool, a digital camera connected to the viewing end of the autocollimator, and a marker and measure generator for receiving digital images from the camera, then displaying or measuring distances between the projection reticle and the reference reticle on the monitoring screen, and relating the distances to the actual position of the autocollimator relative to the reference tooling ball. The images and measurements are used to set the position of the machine tool and to measure the size and shape of the machine tool tip, and examine cutting edge wear. patent

  9. Wachs Cutter Tooling Station (4495)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    purchase, build and install Wachs cutter tooling. The Wachs Cutter Tooling Station is similar to previously operated facility tooling and will utilize an existing hydraulic unit....

  10. Software Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Windows and Building Envelope » Software Tools Software Tools See past projects. Fenestration Software Tools Lead Performer: Lawrence Berkeley National Laboratory - Berkeley, CA

  11. HPC_Tools.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5, 2011 * Introduction * Debugging * Performance / Optimization Outline 3 * Scope of Today's Talks - Debugging and optimization tools - Some basic strategies * Take Aways - Common problems and strategies - How tools work in general - A few specific tools you can try Introduction 4 * Types of problems - "Serial" * Invalid memory references * Array reference out of bounds * Divide by zero * Uninitialized variables - Parallel * Unmatched sends/receives * Blocking receive before

  12. Demand Response Analysis Tool

    Energy Science and Technology Software Center (OSTI)

    2012-03-01

    Demand Response Analysis Tool is a software developed at the Lawrence Berkeley National Laboratory. It is initially funded by Southern California Edison. Our goal in developing this tool is to provide an online, useable, with standardized methods, an analysis tool to evaluate demand and demand response performance of commercial and industrial facilities. The tool provides load variability and weather sensitivity analysis capabilities as well as development of various types of baselines. It can be usedmore » by researchers, real estate management firms, utilities, or any individuals who are interested in analyzing their demand and demand response capabilities.« less

  13. Lustre Administrative Tool

    Energy Science and Technology Software Center (OSTI)

    2003-12-24

    The Lustre Administrative Tools (LAT) is a set of programs and utilities designed to facilitate management of the Lustre File System by System Administrators.

  14. Manifold tool guide

    DOE Patents [OSTI]

    Djordjevic, A.

    1983-12-27

    A tool guide is described that makes possible the insertion of cleaning and/or inspection tools into a manifold pipe that will dislocate and extract the accumulated sediment in such manifold pipes. The tool guide basically comprises a right angled tube (or other angled tube as required) which can be inserted in a large tube and locked into a radially extending cross pipe by adjustable spacer rods and a spring-loaded cone, whereby appropriate cleaning tools can be inserted into the cross pipe for cleaning, inspection, etc. 3 figs.

  15. Manifold tool guide

    DOE Patents [OSTI]

    Djordjevic, Aleksandar

    1983-12-27

    A tool guide that makes possible the insertion of cleaning and/or inspection tools into a manifold pipe that will dislocate and extract the accumulated sediment in such manifold pipes. The tool guide basically comprises a right angled tube (or other angled tube as required) which can be inserted in a large tube and locked into a radially extending cross pipe by adjustable spacer rods and a spring-loaded cone, whereby appropriate cleaning tools can be inserted into to cross pipe for cleaning, inspection, etc.

  16. Demand Response Dispatch Tool

    Energy Science and Technology Software Center (OSTI)

    2012-08-31

    The Demand Response (DR) Dispatch Tool uses price profiles to dispatch demand response resources and create load modifying profiles. These annual profiles are used as inputs to production cost models and regional planning tools (e.g., PROMOD). The tool has been effectively implemented in transmission planning studies conducted by the Western Electricity Coordinating Council via its Transmission Expansion Planning and Policy Committee. The DR Dispatch Tool can properly model the dispatch of DR resources for bothmore » reliability and economic conditions.« less

  17. Air Sparging Decision Tool

    Energy Science and Technology Software Center (OSTI)

    1996-06-10

    The Air Sparging Decision Tool is a computer decision aid to help environmental managers and field practitioners in evaluating the applicability of air sparging to a wide range of sites and for refining the operation of air sparging systems. The program provides tools for the practitioner to develop the conceptual design for an air sparging system suitable for the identified site. The Tool provides a model of the decision making process, not a detailed designmore » of air sparging systems. The Tool will quickly and cost effectively assist the practitioner in screening for applicability of the technology at a proposed site.« less

  18. lustre-tools-llnl

    Energy Science and Technology Software Center (OSTI)

    2010-12-17

    lustre-tools-llnl is a small set of commands that are helpful for using and administering a lustre file system.

  19. Demand Response Analysis Tool

    SciTech Connect (OSTI)

    2012-03-01

    Demand Response Analysis Tool is a software developed at the Lawrence Berkeley National Laboratory. It is initially funded by Southern California Edison. Our goal in developing this tool is to provide an online, useable, with standardized methods, an analysis tool to evaluate demand and demand response performance of commercial and industrial facilities. The tool provides load variability and weather sensitivity analysis capabilities as well as development of various types of baselines. It can be used by researchers, real estate management firms, utilities, or any individuals who are interested in analyzing their demand and demand response capabilities.

  20. Tools for Public Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    including Intellus, an online tool that provides transparency and accessibility to the environmental monitoring data from in and around Los Alamos National Laboratory. August 1,...

  1. EE Maximization Tool

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    News & Events Skip navigation links Marketing Resources Reports, Publications, and Research Utility Toolkit Utility Potential Calculator EE Maximization Tool Conduit Utility...

  2. AIRMaster+ Tool Introduction

    Broader source: Energy.gov [DOE]

    This presentation discusses typical compressed air system operation and discusses methods of system efficiency improvement through use of the AIRMaster+ and CAC LogTool software.

  3. Strain gauge installation tool

    DOE Patents [OSTI]

    Conard, Lisa Marie

    1998-01-01

    A tool and a method for attaching a strain gauge to a test specimen by maaining alignment of, and applying pressure to, the strain gauge during the bonding of the gauge to the specimen. The tool comprises rigid and compliant pads attached to a spring-loaded clamp. The pads are shaped to conform to the specimen surface to which the gauge is to be bonded. The shape of the pads permits the tool to align itself to the specimen and to maintain alignment of the gauge to the specimen during the bond curing process. A simplified method of attaching a strain gauge is provided by use of the tool.

  4. Manifold tool guide

    DOE Patents [OSTI]

    Djordjevic, A.

    1982-07-08

    A tool guide that makes possible the insertion of cleaning and/or inspection tools into a manifold pipe that will dislocate and extract the accumulated sediment in such manifold pipes. The tool guide basically comprises a right angled tube (or other angled tube as required) which can be inserted in a large tube and locked into a radially extending cross pipe by adjustable spacer rods and a spring-loaded cone, whereby appropriate cleaning tools can be inserted into to cross pipe for cleaning, inspection, etc.

  5. Ames Laboratory Personal Information Form | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ames Laboratory Personal Information Form ATTENTION: Forms that reside in an employee's official personnel file (OPF) now have barcodes in the bottom right-hand corner. The most common forms are the Personnel Requisitions, Change/Reappointment Requisition, AL-473 form, and Associateship form. The barcodes were placed on the forms for the Content Management system that Human Resources will implement to scan employee records. Effective immediately, if old versions of official personnel file (OPF)

  6. Form:SampleForm | Open Energy Information

    Open Energy Info (EERE)

    SampleForm Jump to: navigation, search Input the name of a Test Page below. If the resource already exists, you will be able to edit its information. AddEdit a Test Page The text...

  7. Structural Health Monitoring Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    May 30, 2014 Example Usages Contents Data Set Descriptions Integrating Examples Modal Analysis Condition-Based Monitoring Active Sensing Outlier Detection Data Set Descriptions ...

  8. EIA Electric Power Forms

    U.S. Energy Information Administration (EIA) Indexed Site

    Electric Power Forms EIA Electric Power Forms Listing of Publicly Available and Confidential Data EIA's statistical surveys encompass each significant electric supply and demand activity in the United States. Most of the electric power survey forms resulting data elements are published, but respondent confidentiality is required. The chart below shows the data elements for each survey form and how each data element is treated in regard to confidentiality. Data Categories Data collection forms

  9. Tool holder for preparation and inspection of a radiused edge cutting tool

    DOE Patents [OSTI]

    Asmanes, Charles

    1979-01-01

    A tool holding fixture is provided for removably holding a radiused edge cutting tool in a tool edge lapping apparatus. The fixture allows the operator to preset the lapping radius and angle before the tool holder is placed in the fixture and the holder may be removed from the lapping apparatus to inspect the tool and simply replaced in the fixture to continue lapping in accordance with a precise alignment without realignment of the tool relative to the lap. The tool holder includes a pair of self aligning bearings in the form of precision formed steel balls connected together by a rigid shaft. The tool is held by an arm extending from the shaft and the balls set in fixed position bearing cups and the holder is oscillated back and forth about a fixed axis of rotation to lap the tool radius by means of a reversibly driven belt-pulley arrangement coupled to the shaft between the bearings. To temporarily remove the holder, the drive belt is slipped over the rearward end of the holder and the holder is lifted out of the bearing cups.

  10. Table of Contents

    Energy Savers [EERE]

    ... The facility will remove impurities from surplus weapons-grade plutonium and mix it with depleted uranium oxide to form fuel pellets for commercial nuclear power reactors. MOX ...