Powered by Deep Web Technologies
Note: This page contains sample records for the topic "form parts iv-vii" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Method of forming and assembly of parts  

DOE Patents (OSTI)

A method of assembling two or more parts together that may be metal, ceramic, metal and ceramic parts, or parts that have different CTE. Individual parts are formed and sintered from particles that leave a network of interconnecting porosity in each sintered part. The separate parts are assembled together and then a fill material is infiltrated into the assembled, sintered parts using a method such as capillary action, gravity, and/or pressure. The assembly is then cured to yield a bonded and fully or near-fully dense part that has the desired physical and mechanical properties for the part's intended purpose. Structural strength may be added to the parts by the inclusion of fibrous materials.

Ripley, Edward B. (Knoxville, TN)

2010-12-28T23:59:59.000Z

2

Method of forming and assembly of metal parts and ceramic parts  

DOE Patents (OSTI)

A method of forming and assembling at least two parts together that may be metal, ceramic, or a combination of metal and ceramic parts. Such parts may have different CTE. Individual parts that are formed and sintered from particles leave a network of interconnecting porosity in each sintered part. The separate parts are assembled together and then a fill material is infiltrated into the assembled parts using a method such as capillary action, gravity, and/or pressure. The assembly is then cured to yield a bonded and fully or near-fully dense part that has the desired physical and mechanical properties for the part's intended purpose. Structural strength may be added to the parts by the inclusion of fibrous materials.

Ripley, Edward B. (Knoxville, TN)

2011-11-22T23:59:59.000Z

3

EEOC FORM715-01 PART A - D  

National Nuclear Security Administration (NNSA)

US Department of Energy National Nuclear Security Administration Management Directive 715 Fiscal Year 2008 National Nuclear Security Administration FY 2008 MD-715 EEO Program Status Report Table of Contents Page Parts A-C: Agency Identifying Information.............................................................1 Part D: Subordinate Components.........................................................................2 Part E: Executive Summary................................................................................4 Part F: Certification.....................................................................................10 Part G: Facility Self-Assessment.................................................................................11

4

2009 No part may be reproduced in any form without prior authorization.  

E-Print Network (OSTI)

Wing (198397) NASA/MDA/WU IFCS: NASA Ames Research Center, NASA Dryden, Boeing Phantom Works/11 Tragedies 1. Strategic Spare Parts Inventory 2. Vulnerability Assessments 3. Red Teaming 4. Secure

Amin, S. Massoud

5

Copyright! 2010!No!part!of!this!presentation!may!be! reproduced!in!any!form!without!prior!authorization.  

E-Print Network (OSTI)

electrical energy infrastructure ­ Transform!the!Network!into!a!Smart!Grid ­ Develop!an!Expanded!Transmission!ENERGY!&!GREEN!DESIGN!" Smart!Grid!Cities Material!from!the!Electric!part!of!this!presentation!may!be!reproduced!in!any!form without!prior!authorization. Energy map adapted

Amin, S. Massoud

6

Machine tool for lamellar forming of sheet metal parts for heat exchangers - MFAH 260  

Science Conference Proceedings (OSTI)

The present paper was done for the design of a machine tool used in the manufacturing process of lamellar forming for heat exchangers made of stainless steel. It present the working cycle that the machine tool must execute in order to attains the needed ...

V. Ispas; A. Hordoan; M. Steopan

2008-05-01T23:59:59.000Z

7

Medical History Questionnaire This form is voluntary. You may ignore it, complete parts of it, or fill it out fully. It is intended solely for  

E-Print Network (OSTI)

Medical History Questionnaire This form is voluntary. You may ignore it, complete parts of it, or fill it out fully. It is intended solely for your self-protection at sea, by making your medical history available for reference at Medical Advisory Systems/ MedAire, 80 E. Salado Parkway, Suite 610

Russell, Lynn

8

EEOC FORM  

National Nuclear Security Administration (NNSA)

U.S. Department of Energy U.S. Department of Energy National Nuclear Security Administration Management Directive-715 Fiscal Year 2012 DOE NNSA February 4, 2013 i National Nuclear Security Administration U.S. Department of Energy ANNUAL EEO PROGRAM STATUS REPORT EEO PLAN TO ATTAIN THE ESSENTIAL ELEMENTS OF A MODEL EEO PROGRAM Table of Contents Page FORM 715-01 Part A Department or Agency Identifying Information......................1 FORM 715-01 Part B Total Employment....................................................................1 FORM 715-01 Part C Agency Official(s) Responsible for oversight of EEO Program(s)................................................................................................................1

9

Form Approv  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

'JOE I' ':0 'JOE I' ':0 ) e " Flee/romc Form Approv ed by CGIR· 01120195 (8 ./1" United States Government Department of Energy Bonneville Power Administra ion memorandum DATE : uC l J !:' ZD y REPLY TO ATTN OF : KEP-4 SUBJECT: Environmental Clearance Memorandum TO ; Rob Ochs Project Manager - TELM-TPP-3 Proposed Action: Lane-Wendson No.1 Structure 10/5 Access Road Improvement and Pole Replacement Project Budget Information: Work Order # 224549 PP&A Project No.: 1117 Proposed by: Bonneville Power Administration (BPA) Categorical Exclusion Applied (from Sub part 0,10 C.F.R. Part) 021): B 1.3, Routine maintenance activities ... for structures, rights-of-way, infrastructures such as roads, equipment. .. routine maintenance activities, corrective ... .are required to maintain

10

EEOC FORM  

National Nuclear Security Administration (NNSA)

09 09 National Nuclear Security Administration FY 2009 MD-715 EEO Program Status Report Table of Contents Page Parts A-C: Agency Identifying Information .........................................................................2 Part D: Subordinate Components..........................................................................................4 Part E: Executive Summary ..................................................................................................5 Part F: Certification...............................................................................................................14 Part G: Essential Elements of a Model EEO Program (A-F)................................................16 Part H: Plan to Reach Model EEO Program Status

11

Form 101 Part II: Research Proposal - CECM  

E-Print Network (OSTI)

n = 10 variables and degree d = 50, we will need p > 509, a 51 bit prime whereas ..... The research area of each team member below includes computer algebra.

12

Microsoft Word - Epoxy Usage Form.docx  

NLE Websites -- All DOE Office Websites (Extended Search)

Division Form Rev. 41111 Monthly Epoxy Usage Form (Weight in Grams) Date Initials CTD 101K Stycast Catalyst Epon Resin Epicure Part A Part B Part C 2850 24LV 815828 3140...

13

2009 ASHRAE. THIS PREPRINT MAY NOT BE DISTRIBUTED IN PAPER OR DIGITAL FORM IN WHOLE OR IN PART. IT IS FOR DISCUSSION PURPOSES ONLY AT THE 2009 ASHRAE WINTER CONFERENCE. The archival version of this paper along with comments and author responses will be pu  

E-Print Network (OSTI)

2009 ASHRAE. THIS PREPRINT MAY NOT BE DISTRIBUTED IN PAPER OR DIGITAL FORM IN WHOLE OR IN PART. IT IS FOR DISCUSSION PURPOSES ONLY AT THE 2009 ASHRAE WINTER CONFERENCE. The archival version of this paper along with comments and author responses will be published in ASHRAE Transactions, Volume 115, Part 1. ASHRAE must

Pennycook, Steve

14

2005 ASHRAE. THIS PREPRINT MAY NOT BE DISTRIBUTED IN PAPER OR DIGITAL FORM IN WHOLE OR IN PART. IT IS FOR DISCUSSION PURPOSES ONLY AT THE 2005 ASHRAE WINTER MEETING. The archival version of this paper along with comments and author responses will be publi  

E-Print Network (OSTI)

©2005 ASHRAE. THIS PREPRINT MAY NOT BE DISTRIBUTED IN PAPER OR DIGITAL FORM IN WHOLE OR IN PART. IT IS FOR DISCUSSION PURPOSES ONLY AT THE 2005 ASHRAE WINTER MEETING. The archival version of this paper along with comments and author responses will be published in ASHRAE Transactions, Volume 111, Part 1. ASHRAE must

15

2003 ASHRAE. THIS PREPRINT MAY NOT BE DISTRIBUTED IN PAPER OR DIGITAL FORM IN WHOLE OR IN PART. IT IS FOR DISCUSSION PURPOSES ONLY AT THE 2003 ASHRAE ANNUAL MEETING. The archival version of this paper along with comments and author responses will be publi  

E-Print Network (OSTI)

2003 ASHRAE. THIS PREPRINT MAY NOT BE DISTRIBUTED IN PAPER OR DIGITAL FORM IN WHOLE OR IN PART. IT IS FOR DISCUSSION PURPOSES ONLY AT THE 2003 ASHRAE ANNUAL MEETING. The archival version of this paper along with comments and author responses will be published in ASHRAE Transactions, Volume 109, Part 2. ASHRAE must

16

Precision Wire Forming  

SciTech Connect

An air-operated semiautomatic wire former was designed and built at Mound Laboratory to form specific types of electrodes to be molded in plastic parts. Use of the semiautomatic wire former eliminates the sliding action of tooling on the surface of the electrode wire to be formed and properly aligns the crimped electrode surfaces to within required tolerance ranges. These are difficulties which are characteristic of conventional wire forming tooling. Interchangeable tooling is provided with the semiautomatic wire former for forming electrode wires in one plane; secondary tooling was designed and bulit for forming electrode wires in two planes; and a special series of tooling was designed for forming more complex wire forms.

Weeks, J. E.; Osborne, J. M.

1970-08-07T23:59:59.000Z

17

ARM - Forms  

NLE Websites -- All DOE Office Websites (Extended Search)

ARMForms About Become a User Recovery Act Mission FAQ History Organization Participants Facility Statistics Forms Contacts Facility Documents ARM Management Plan (PDF, 335KB) Field...

18

Copyright Form  

Science Conference Proceedings (OSTI)

5 of Part A returns reproduction rights to the U.S. government when required for U.S. ... used in a way that implies endorsement by TMS of a product or service,.

19

order form  

NLE Websites -- All DOE Office Websites (Extended Search)

Customer Order Form Customer Order Form Fermilab Education Office - Customer Order Form PO BOX 500, MS 777, Batavia, IL 60510 * ph. 630-840-8258 * fax 630-840-2500 * avarry@fnal.gov Date: This order be: SHIPPED PICKED UP? Bill to: Ship to: Contact/Institution name: Email: Phone: Fax: Payment method (please circle): Visa/MasterCard - Check - Purchase Order  Visa/MasterCard # P.O. # Exp Date: Quantity Ordered Item Name Item Description (color, size, etc.) Price Each Total Amount  For purchases over $200 only *IL residents ONLY: Add 7.5% sales tax to your order.

20

Sponsorship Form  

Science Conference Proceedings (OSTI)

May 20, 2007 ... Conference Banquet. $5,000. Signage, napkins. (limit 4 sponsors). Mail or fax this form to: TMS c/o Arlene Frances. Phone: (724) 776-9000, ext.

Note: This page contains sample records for the topic "form parts iv-vii" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Form Approved  

U.S. Energy Information Administration (EIA) Indexed Site

DISCLOSURE OF INFORMATION: The items RESPONDENT IDENTIFICATION Company Name and OTHER PARTY NAME (Item 1.A.), and SELLER'S NAME (Item 3.B.) on Form EIA-858 are DISCLOSURE OF INFORMATION: The items RESPONDENT IDENTIFICATION Company Name and OTHER PARTY NAME (Item 1.A.), and SELLER'S NAME (Item 3.B.) on Form EIA-858 are NOT considered confidential and may be publicly released in identifiable form. All other information you provide will be used for statistical purposes only. In accordance with the Confidential Information Protection provisions of Title V, Subtitle A of Public Law 107-347 and other applicable Federal laws, your responses will be kept confidential and will not be disclosed in identifiable form to anyone other than employees or agents without your consent. By law, every EIA employee, as well as every agent, is subject to a jail term, a fine of up to $250,000, or both if he or she discloses ANY identifiable information about you.

22

Coach Compliance Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Coach Compliance Form Coach Compliance Form My team is participating in the Department of Energy's Lithium-Ion Battery Car Competition as part of the National Science Bowl ® . I have reviewed the following documents with the participating students: o Safety Hazards of Batteries o Material Safety Data Sheet - Lithium Polymer Battery o Electric Battery Car Competition Rules ______________________________ ______________ Coach Signature Date Name of School: ____________________________________________ Name of Coach (Please Print): ________________________________ Coach's Email Address: ______________________________________ Please sign this form and either mail, fax or e-mail a pdf to the National Renewable Energy Laboratory: National Renewable Energy Laboratory

23

Registration Form  

NLE Websites -- All DOE Office Websites (Extended Search)

SNAP COLLABORATION MEETING JUNE 1 - 3, 2006 REGISTRATION FORM To register, please fill out the registration form below and click on the "SEND" button. Your registration will allow us to make security access and hospitality arrangements for you. Deadline: Please register NLT Wednesday, May 24, 2006. 1. Your Name (Last, First): 2. Your Institution: 3. Email address: 4. Citizenship (for non-DOE employees/guests): 5. Arrival date: 6. Departure Date: 7. Will you be attending the working dinner on Thursday, June 1? Yes No 8. Any dietary restrictions? Please click on the "Send" button below to email this form automatically to snap@lbl.gov. An automatic email reply receipt confirmation will be sent back to your email address. Send Reset Thank you!

24

Form1  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

B. U.S. DEPARTMENT OF ENERGY FORM 3304.2, B. U.S. DEPARTMENT OF ENERGY FORM 3304.2, APPROVAL OF EXPERT OR CONSULTANT EMPLOYMENT REQUEST U.S.DEPARTMENT OF ENERGY APPROVAL OF EXPERT OR CONSULTANT EMPLOYMENT REQUEST (Continued on Reverse) DOE F 3304.2 (01-07) 1. Name of Expert or Consultant: 2. Organization: 9. Current Employment (position, company, and location): 10. Home Address (city, state, and zip code): 11. Official Worksite (where services are to be performed): 12. APPROVALS 3. Action Requested: 4. Hourly Rate of Pay: 5. Nature of Appointment: 6. Period for Which Services Are Desired: 7. Estimated Number of Days to Be Worked: 8. Number of Days Worked Under Present Appointment: (Extension Only) 13. Description of Services Required: 14. Justification for this Expert/Consultant Action and Qualifications of Candidate Related to Need for Appointment:

25

Part Functions  

Science Conference Proceedings (OSTI)

Table 1   Functions served by parts...Mechanical power Shafts, connecting rods, gears Electricity Wires, lightbulb elements, resistors Provide a barrier (for example: reflect, cover, enclose,

26

Forms of matter and forms of radiation  

E-Print Network (OSTI)

The theory of defects in ordered and ill-ordered media is a well-advanced part of condensed matter physics. Concepts developed in this field also occur in the study of spacetime singularities, namely: i)- the topological theory of quantized defects (Kibble's cosmic strings) and ii)- the Volterra process for continuous defects, used to classify the Poincar\\'e symmetry breakings. We reassess the classification of Minkowski spacetime defects in the same theoretical frame, starting from the conjecture that these defects fall into two classes, as on they relate to massive particles or to radiation. This we justify on the empirical evidence of the Hubble's expansion. We introduce timelike and null congruences of geodesics treated as ordered media, viz. 'm'-crystals of massive particles and 'r'-crystals of massless particles, with parallel 4-momenta in M^4. Classifying their defects (or 'forms') we find (i) 'm'- and 'r'- Volterra continuous line defects and (ii) quantized topologically stable 'r'-defects, these latter forms being of various dimensionalities. Besides these 'perfect' forms, there are 'imperfect' disclinations that bound misorientation walls in three dimensions. We also speculate on the possible relation of these forms with the large-scale structure of the Universe.

Maurice Kleman

2009-05-28T23:59:59.000Z

27

PART I  

NLE Websites -- All DOE Office Websites (Extended Search)

DE-AC02-09CH11466 DE-AC02-09CH11466 Section D i PART I SECTION D PACKAGING AND MARKING TABLE OF CONTENTS PAGE NO. D.1 - PACKAGING D-1 D.2 - MARKING D-1 Contract No. DE-AC02-09CH11466 Section D D-1 PART I SECTION D - PACKAGING AND MARKING D.1 - PACKAGING Preservation, packaging, and packing for shipment or mailing of all work delivered hereunder shall be in accordance with good commercial practice and adequate to ensure acceptance by common carrier and safe transportation at the most economical rates. D.2 - MARKING Each package, report or other deliverable shall be accompanied by a letter or other document which: (a) Identifies the contract number under which the item is being delivered. (b) Identifies the contract requirement or other instruction which requires the

28

Benefit Forms | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

New Employee Orientation » Benefit Forms New Employee Orientation » Benefit Forms Benefit Forms The employment and benefits forms that you will be asked to complete as part of this orientation program can be numerous. Each, however, serves an important purpose in ensuring proper recording of your employment and benefit elections. This online program is designed to make the task a little easier. Each set of forms that you will work with has been compiled to ensure that you are only completing the essential documentation for your individual employment circumstance. Also, each set begins with an Employee Information Form that, upon completion, will auto-populate applicable data throughout the entire package. All of the forms are in PDF format and require Acrobat Reader to view and fill-in. When you open the form "Packages," it will load in a separate

29

Gammasphere Checklist form  

NLE Websites -- All DOE Office Websites (Extended Search)

Gammasphere Checklist - Submission Form Gammasphere Checklist - Submission Form The use of the FMA and Gammasphere, combined or separately, can involve a number of detection systems and special features. The details of how the measurement will be done should be presented as part of the proposal. Some information on these systems is on the web at www.phy.anl.gov/gammasphere/aux/index.html. For assistance in preparing a proposal and for helping the Program Advisory Committee get a more accurate picture of what is planned, we ask you to use the checklist below. Please check the devices that will be needed for the proposed measurement, and include the checklist with your proposal. Note that some of the items are still under development - others may require considerable planning. Note also that a number of the 'primary' detectors (those that may be needed to

30

Optimization of forming load and variables in deep drawing process ...  

E-Print Network (OSTI)

Mar 6, 2007 ... Abstract: Sheet metal forming is a significant manufacturing process for producing a large variety of automotive parts and aerospace parts as...

31

Data Capture Form Data capture form  

E-Print Network (OSTI)

Data Capture Form Data capture form Please make use of the data capture form relevant not on the common lists. The data capture form must be printed and used in the field during the census to capture all the data during the BCW. All data captured onto this form must please be submitted by the team

de Villiers, Marienne

32

APPENDIX A: Forms and Instructions Form Form R93D-44 Form R93D-03  

U.S. Energy Information Administration (EIA) Indexed Site

APPENDIX A: Forms and Instructions APPENDIX A: Forms and Instructions Form Form R93D-44 Form R93D-03 Form R93D-59 Instructions Form RT94-02 Form RT94-04 Form RT94-0! Form RT94-03 Form RT94-05 Form RT94-06 Instructions Form RT94-09 Instructions Form RT94-10 Form RT94-07 Form RT94-08 Form RT94-17 Form RT94-19 Form RT94-24 Form RT94-15 Form RT94-13 Form RT94-22 Form RT94-26 Form RT94-18 Form RT94-20 FormRT94-16 Form RT94-14 Form RT94-21 Form RT94-25 FormRT94-ll Form RT94-12 Form RT94-23 Form RT94-27 Section N (Vehicles) of 1993 RECS Questionnaire ............. Cover Letter for VIN Follow-up ........................... Vehicle Information Card (yellow, front only) ................. 1993 RECS Mail Questionnaire, Pages 4-5 (vehicle pages only) .... Instructions for Assembling RTECS Mid-Year Mailings ..........

33

Form 101 Part II: Research Proposal - CECM - Simon Fraser University  

E-Print Network (OSTI)

the benefits expected to accrue to Canadian industry, to the academic institution, ..... However, Steel, in unpublished work, had already implemented a simpler...

34

2013 Electricity Form Proposals  

U.S. Energy Information Administration (EIA) Indexed Site

Coal Survey Form Changes 2013 Proposals The U.S. Energy Information Administration (EIA) is proposing to change its data protection policy for the following survey forms: Form...

35

Process Deviation Form  

NLE Websites -- All DOE Office Websites (Extended Search)

3 Process Deviation Form 080822 Page 1 of 3 EOTA - Business Form Document Title: Process Deviation Form Document Number: F-013 Rev. 080822 Document Owner: Elizabeth Sousa Backup...

36

Assessor Forms and Information  

Science Conference Proceedings (OSTI)

Other Forms and Information for Assessors. What's on this page? ... Other Forms and Information. Assessor Biographical Sketch Template, PDF, Word. ...

2013-07-26T23:59:59.000Z

37

Tour Registration Form  

Science Conference Proceedings (OSTI)

Feb 25, 2000 ... Accompanying Persons and Plant Tours. REGISTRATION FORM. PLEASE COMPLETE FORM AND MAIL WITH CHECK TO: Helen L.

38

Forms | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Forms Forms Forms DOE Forms are developed within the Department, and approved by the DOE Forms Manager. These forms are designed to obtain or provide structured information common to the needs of two or more DOE field or Headquarters organizations. All of the forms here are in Portable Document Format (PDF). Adobe Acrobat(R) Reader is needed to view and print the PDF files. Fillable forms, identified by the "fillable" icon, require a full version of Adobe Acrobat software. DOE Forms Forms by Subject Forms by Number Management & Administration 0000 - 1999 Legal 2000 - 2999 Personnel Management 3000 - 3999 Logistic Management 4000 - 4999 Program Planning & Management 5000 - 5999 HQ Forms HQ Forms are developed or managed by a Headquarters organization, and

39

CIMS Course Application Form September 2013  

E-Print Network (OSTI)

CIMS Course Application Form 9th -13th September 2013 Name University/Company Address Address complete and return to Natalie Berge at: cims@surrey.ac.uk For applicants interested only in Part II

Doran, Simon J.

40

Forms | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Forms Forms The following interactive Web-based forms in Adobe Acrobat Portable Document Format (PDF) are designed for online completion with Acrobat Reader 3.0 or above. Input...

Note: This page contains sample records for the topic "form parts iv-vii" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

2013 Form W-4  

NLE Websites -- All DOE Office Websites (Extended Search)

Form W-4 (2013) Purpose. Complete Form W-4 so that your employer can withhold the correct federal income tax from your pay. Consider completing a new Form W-4 each year and when...

42

Forms | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

- 3999 Logistic Management 4000 - 4999 Program Planning & Management 5000 - 5999 HQ Forms HQ Forms are developed or managed by a Headquarters organization, and approved by the DOE...

43

LBNL Affiliate Forms - Cyclotron  

NLE Websites -- All DOE Office Websites (Extended Search)

Safety History Links Directions Webmaster User Info > New User Checklist > LBNL Affiliate Forms v.1 LBNLAffiliateForms.pdf (161k) Daphne Trowbridge-Williams,...

44

Tour Registration Form - TMS  

Science Conference Proceedings (OSTI)

Page 1. Tour Registration Form. Tour Registration Form. Please print legibly below: Participant's Full Name. Telephone. Fax. Mobile. E-mail. Method of...

45

Form:SampleForm | Open Energy Information  

Open Energy Info (EERE)

SampleForm Jump to: navigation, search Input the name of a Test Page below. If the resource already exists, you will be able to edit its information. AddEdit a Test Page The text...

46

SRS - Retiree Benefits - Forms  

NLE Websites -- All DOE Office Websites (Extended Search)

Forms Forms Medical Forms Return completed forms to: 5-200 Health Care Programs Enrollment Change Benefits Solutions Service Center Bldg 703-47A, Aiken, SC 29808 5-340 Medical Claim Form Claims Processing Center P.O. Box 100300, Columbia, SC 29202 -- Pharmacy Claim Form Caremark Prescription Drug Claim Processing Center, P.O. Box 52059, Phoenix, AZ 85072-2059 Dental Forms Return completed forms to: 5-200 Health Care Programs Enrollment Change Benefits Solutions Service Center Bldg 703-47A, Aiken, SC 29808 5-342 Dental Claim Form Claims Processing Center P.O. Box 100300, Columbia, SC 29202 Life Insurance Return completed forms to: 5-171 Contributory Group Life Application and Deduction Authorization Benefits Solutions Service Center Bldg 703-47A, Aiken, SC 29808

47

2014 Electricity Form Proposals  

U.S. Energy Information Administration (EIA) Indexed Site

Electricity and Renewable (Photovoltaic) Survey Form Changes Proposed for Electricity and Renewable (Photovoltaic) Survey Form Changes Proposed for 2014 The U.S. Energy Information Administration (EIA) is proposing changes to its electricity data collection in 2014. These changes involve the following surveys: Form EIA-63B, "Annual Photovoltaic Cell/Module Shipments Report," Form EIA-411, "Coordinated Bulk Power Supply Program Report," Form EIA-826, "Monthly Electric Utility Sales and Revenue Report with State Distributions," Form EIA-860, "Annual Electric Generator Report," Form EIA-860M, "Monthly Update to the Annual Electric Generator Report," Form EIA-861, "Annual Electric Power Industry Report," Form EIA-861S, "Annual Electric Power Industry Report (Short Form)," and

48

Ultrasonic Assembly of Thermoplastic Parts  

SciTech Connect

Four ultrasonic methods were evaluated for assembly of experimental plastic parts for detonators: (1) welding, (2) crimping and staking, (3) insertion, and (4) reactivation of adhesives. For welding, staking and insertion, plastics with low elastic moduli, such as acrylics and polycarbonate, produced the best results. Thermosetting, hot-melt, and solution adhesives could all be activated ultrasonically to form good bonds on plastics and other materials. This evaluation indicated that thermoplastic detonator parts could be assembled ultrasonically in shorter times than by present production techniques with high bond strengths and high product acceptance rates.

Schurman, W. R.

1970-03-31T23:59:59.000Z

49

EIA Electric Power Forms  

Gasoline and Diesel Fuel Update (EIA)

Electric Power Forms Electric Power Forms EIA Electric Power Forms Listing of Publicly Available and Confidential Data EIA's statistical surveys encompass each significant electric supply and demand activity in the United States. Most of the electric power survey forms resulting data elements are published, but respondent confidentiality is required. The chart below shows the data elements for each survey form and how each data element is treated in regard to confidentiality. Data Categories Data collection forms EIA- 411 EIA- 826 EIA- 860 EIA- 860M EIA- 861 EIA- 923 Frame Information Utility identification and iocation -- -- -- -- X -- Plant identification and iocation -- -- -- X -- X Generation and fuel Latitude and longitude -- -- X -- -- --

50

Exercise Evaluation Forms  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Hazardous Materials Hazardous Materials Exercise Evaluation Forms Prepared for the Department of Energy Office of Transportation and Emergency Management 02B00215-09.p65 This page intentionally left blank table of contents Transportation Emergency Preparedness Program (TEPP) planning tools planning tools Hazar Hazar Hazar Hazar Hazardous Materials dous Materials dous Materials dous Materials dous Materials Ex Ex Ex Ex Exer er er er ercise Ev cise Ev cise Ev cise Ev cise Evaluation Forms aluation Forms aluation Forms aluation Forms aluation Forms Objective 1: Initial Notification of Response Agencies and Response Personnel ........................................................ 3 Objective 2: Direction and Control .............................................................. 5 Objective 3: Incident Assessment ................................................................ 6

51

Weak Energy: Form and Function  

E-Print Network (OSTI)

The equation of motion for a time-independent weak value of a quantum mechanical observable contains a complex valued energy factor - the weak energy of evolution. This quantity is defined by the dynamics of the pre-selected and post-selected states which specify the observable's weak value. It is shown that this energy: (i) is manifested as dynamical and geometric phases that govern the evolution of the weak value during the measurement process; (ii) satisfies the Euler-Lagrange equations when expressed in terms of Pancharatnam (P) phase and Fubini-Study (FS) metric distance; (iii) provides for a PFS stationary action principle for quantum state evolution; (iv) time translates correlation amplitudes; (v) generalizes the temporal persistence of state normalization; and (vi) obeys a time-energy uncertainty relation. A similar complex valued quantity - the pointed weak energy of an evolving state - is also defined and several of its properties in PFS-coordinates are discussed. It is shown that the imaginary part of the pointed weak energy governs the state's survival probability and its real part is - to within a sign - the Mukunda-Simon geometric phase for arbitrary evolutions or the Aharonov-Anandan (AA) phase for cyclic evolutions. Pointed weak energy gauge transformations and the PFS 1-form are discussed and the relationship between the PFS 1-form and the AA connection 1-form is established.

Allen D. Parks

2013-04-09T23:59:59.000Z

52

Time, energy & form  

E-Print Network (OSTI)

Physical manifestations of time occur in natural forms of all sizes. Architectural form serves as shelter while providing a built envelope of human life, simultaneously influencing and influenced by energetic activities ...

McInnis, Martha Jane

1982-01-01T23:59:59.000Z

53

FOIA Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

You are here: DOEID Home > FOIA > FOIA Request Form You are here: DOEID Home > FOIA > FOIA Request Form U.S. Department of Energy Idaho (DOE-ID) Operations Office Electronic FOIA Request Form* To make an Electronic FOIA (E-FOIA) request, please provide the information below. Failure to enter accurate and complete information may render your FOIA request impossible to fulfill. For individuals making a request for personal records under FOIA or the Privacy Act, please fill out the Privacy Act Request Form ( This link opens an 14 kb size Adobe Acrobat File 15 kb), print out the form and have your identity validated by having the form notarized and send the form to DOE-Idaho Privacy Officer, 1955 Freemont Avenue, Mail Stop 1203, Idaho Falls, ID 83405. * Requests submitted under the Privacy Act must be signed and, therefore, cannot be submitted on this form.

54

PMP Tour Form  

Science Conference Proceedings (OSTI)

Tours operate rain or shine. PMP Tour Form. Complete and fax or e-mail this form by November 20 with payment information to: Master Tour Co. Ltd., Thailand.

55

Annual Survey Forms for Domestic Oil and Gas Reserves  

U.S. Energy Information Administration (EIA)

Zip Code PART III. ATTESTATION (I hereby swear or affirm that I have reviewed this Form EIA-23 report and am familiar with its contents, and that to

56

OMB Form 424A  

Science Conference Proceedings (OSTI)

... NOT RETURN YOUR COMPLETED FORM TO THE OFFICE OF MANAGEMENT AND BUDGET. ... In preparing the budget, adhere to any existing ...

2013-06-19T23:59:59.000Z

57

tour registration form  

Science Conference Proceedings (OSTI)

Jan 16, 2002 ... ACCOMPANYING PERSONS TOUR REGISTRATION FORM. 31. 131st Annual Meeting & Exhibition. February 17-21, 2002 Seattle,...

58

Retirement Plaque Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Retirement Plaque Request Form Retirement Plaque Request Form Fill out a separate form for each plaque requested. Allow two weeks for delivery. If you have any questions, please call Rudy Bartolo, Retirement Plaque Coordinator at ext. 5558. FORM MUST BE SUBMITTED (mailed or faxed) in order for work to commence. Return form to Retirement Plaque Coordinator, Mailstop 77R0125, or fax 4993. Please Print Clearly Requester's Name:_______________________________ Extension:_______________ Mail Stop: ________________ Today's date:__________________ With Frame _____ Without Frame_____ Date Needed: ________________________ Full name as it is to appear on plaque:_________________________________________ Number of years employed at Lab:______________ Beginning and ending dates of employment: ____________________________________

59

NEO - Forms Checklist  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

/4/2007; please do not use older versions /4/2007; please do not use older versions Office of Human Capital Management U.S. Department of Energy New Employee Orientation FORMS CHECKLIST EOD Date: _________________ Employee Name: ________________________ Organization: ____________________________ HR Specialist: ___________________________ Telephone Number: _______________________ Admin Contact: __________________________ Telephone Number: _______________________ New Employee Orientation Forms to be issued and collected HR Orientation Team: FORM COMPLETE & SIGNED FORM NAME AND NUMBER YES NO Comments 1. Photo ID 2. Passport; Birth Certificate; or U.S. Citizenship documentation 3. Job Offer Letter Bring on 1 st Day 4. Employment & Benefits Forms listed below

60

2013 Electricity Form Proposals  

U.S. Energy Information Administration (EIA) Indexed Site

Electricity Survey Form Changes in 2013 The U.S. Energy Information Administration (EIA) proposed changes to its electricity data collection in 2013. These changes involve three forms: Form EIA-861, "Annual Electric Power Industry Report" The addition of a new form, the Form EIA-861S, "Annual Electric Power Industry Report (Short Form)" Form EIA-923, "Power Plant Operations Report." The proposals were initially announced to the public via a Federal Register Notice published March 15, 2012. Comments regarding this proposed information collection were due by May 14, 2012. EIA reviewed all comments and made several revisions to the proposals as a result. A second Federal Register Notice was published on August 30, 2012. It outlined the proposals

Note: This page contains sample records for the topic "form parts iv-vii" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

2011Form EIA-902 Instructions  

U.S. Energy Information Administration (EIA) Indexed Site

FORM EIA-902 ANNUAL GEOTHERMAL HEAT PUMP SHIPMENTS REPORT GENERAL INFORMATION AND INSTRUCTIONS I. Purpose Form EIA-902 is designed to provide the data necessary for the U.S. Energy Information Administration (EIA), a part of the U.S. Department of Energy (DOE), to carry out its responsibilities tracking heat pump shipments in the geothermal heat pump industry and reporting information concerning the size and status of the industry. The data collected will be published in the Renewable Energy Annual and also be available through EIA's Internet site at http://www.eia.gov/fuelrenewable.html. II. Who Should Respond to This Survey This report is mandatory and required pursuant to the authority granted to the Department of Energy (DOE) by the Federal Energy Information Administration Act of 1974 (Public Law 93-

62

Form EIA-767  

U.S. Energy Information Administration (EIA) Indexed Site

Form EIA-767 (2005) STEAM-ELECTRIC PLANT OPERATION AND DESIGN REPORT Form Approved OMB No. 1905-0129 Approval Expires: 11/30/2007 PURPOSE Form EIA-767 collects information annually from all U.S. plants with a total existing or planned organic-fueled or combustible renewable steam-electric unit that has a generator nameplate rating of 10 megawatts or larger. This report is used for economic analyses conducted by the Department of Energy. The data from this form appear in the Electric Power Annual and the Annual Energy Review. The data collected on this form are used to monitor the current status and trends in the electric power industry and to evaluate the future of the industry. REQUIRED RESPONDENTS A Form EIA-767 must be completed and filed for each existing, under-construction, or planned

63

FFSE Online Membership Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Form Form This form is for people who would like to join or renew membership in Fermilab Friends for Science Education. If you would like to donate to FFSE, but not become a member, please go to the Donation Form. If you are a teacher and would like a joint membership in ISTA and FFSE, use the ISTA/FFSE Form. This form functions like a conventional online shopping cart. You add items to the cart with the "Add to Cart" button and may confirm what is in your cart with the "View Cart" button. To add more items when viewing the cart, click "Continue Shopping." You can choose to contribute to any or all of the options. There are three possible items available to put in the cart. You will be directed further to complete the transaction as you check out.

64

Process / CI Form  

NLE Websites -- All DOE Office Websites (Extended Search)

6 Process / Continual Improvement Form 11_0119 Page 1 of 3 6 Process / Continual Improvement Form 11_0119 Page 1 of 3 EOTA - Business Form Document Title: Process / Continual Improvement Form Document Number: F-016 Rev 11_0119 Document Owner: Elizabeth Sousa Backup Owner: David Rocha Approver(s): Melissa Otero Parent Document: P-012, Process / Continual Improvement Notify of Changes: EOTA Employees Referenced Document(s): N/A F-016 Process / Continual Improvement Form 11_0119 Page 2 of 3 Revision History: Rev. Description of Change A Initial Release 08_0425 Corrected minor problems and updated revision number. 11_0119 Merged F-019 Improvement Opportunity Planning Worksheet into this document F-016 Process / Continual Improvement Form 11_0119 Page 3 of 3

65

Science Brief Submission Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Science Brief Submission Form Science Brief Submission Form Science Brief Submission Form Print Tuesday, 01 May 2007 00:00 Science Brief Guidelines and Submission Form Please fill out the form below to submit a Science Brief and send ONE image (may be a composite of up to four images) from your publication directly to us at alscommunications@lbl.gov. Please note: The image must be high resolution, and, if there is text on the image, it must be scalable. We will let you know as soon as it is posted! * Required Your Name * Your Email Address * Your Affiliation Title of Publication * Link to Publication (if available) Beamline(s) * Journal Citation * Description of Research * 200 word maximum Image Caption * 50 word maximum Submit Never submit passwords through Google Forms. Powered by Google Docs Report Abuse - Terms of Service - Additional Terms

66

Membership form 11  

NLE Websites -- All DOE Office Websites (Extended Search)

Join, renew or donate online at ed.fnal.gov/ffse or use this form. Join, renew or donate online at ed.fnal.gov/ffse or use this form. Fermilab Friends for Science Education Membership Form Membership Levels Director's Club: $1,000.00 Patron: $500.00 Sponsor: $250.00 Dual: $100.00 Regular: $50.00 Teacher: $10.00 Name:_____________________________________________________________________ Partner's Name:_____________________________________________________________ Address:___________________________________________________________________ City, State, Zip:_____________________________________________________________ Telephone:_______________________ E-mail:__________________________

67

Housing Reservation Form  

Science Conference Proceedings (OSTI)

NOTE: PLEASE RETURN THIS FORM BY MAY 31, 2003 to: BY MAIL: Meghan Webb, Conference Services, University of Utah,. 110 S. Ft. Douglas Blvd., Salt...

68

ESIF Project Proposal Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Systems Integration Project Submittal Form Title of Project: Date Submitted: Name of PI at NREL: Name of PI: InstituteEmployer: Phone: Fax: Street Address: City: State: Country:...

69

2014 Coal Form Proposals  

U.S. Energy Information Administration (EIA)

Coal Survey Form Changes Proposed for 2014. The U.S. Energy Information Administration (EIA) has begun the process of re-clearing the coal survey ...

70

Author Biography Form  

Science Conference Proceedings (OSTI)

Author Biography Form. Title: ? Dr. ? Prof. ? Mr. ? Mrs. ? Ms. Gender: ? Male ? Female. Name: First. M.I.. Last. Current Status: Position: Company: Address:.

71

IEEE Copyright form  

Science Conference Proceedings (OSTI)

This form is intended for original, previously unpublished material submitted to lEEE .... IEEE Policy 6.17CLEARANCE OF PAPERSapplies to all material...

72

Housing Reservation Form  

Science Conference Proceedings (OSTI)

Zip. Phone. Fax. Credit Card Type*. Number. Expiration Date. Signature. * Visa, MasterCard and Discover credit cards are accepted. Mail or fax this form to:.

73

Mentee Profile Form  

Energy.gov (U.S. Department of Energy (DOE))

The information you provide on this form will assist us in providing you with a list of prospective mentors from which to choose the most appropriate match.

74

Mentor Profile Form  

Energy.gov (U.S. Department of Energy (DOE))

The information you provide on this form will assist us in providing you with a list of prospective mentee from which to choose the most appropriate match.

75

Shaping and Forming  

Science Conference Proceedings (OSTI)

"ElectroplasticityThe Effect of Electricity on the Mechanical Properties of Metals " ..... "Spray Forming: Alloys, Products, and Markets" (JOM-e: Overview),...

76

tour reservation form  

Science Conference Proceedings (OSTI)

Mar 15, 2004 ... 37. Send completed Charlotte Tour Registration Form with payment to: America Charters Ltd, 1251 W. Craighead Road, Charlotte, NC 28206.

77

Tour Reservations Form (PDF)  

Science Conference Proceedings (OSTI)

May 2, 2008 ... Page 1. Tour Form. REGISTRANT INFORMATION (Print or type.) Last Name. First Name. Middle ______. Street Address. City. /Province...

78

Corporate Sponsorship Form - TMS  

Science Conference Proceedings (OSTI)

Sponsorship Reservation Form in order to reserve a sponsorship. Final payment is due ... Payment terms are net 30 days unless other arrangements are made.

79

Participation Form | ENERGY STAR  

NLE Websites -- All DOE Office Websites (Extended Search)

application. Select the ENERGY STAR program you intend to participate in, and choose your primary contacts. Return this form to ENERGY STAR for consideration as a partner....

80

w: Reglstratlon Form  

Science Conference Proceedings (OSTI)

Please see Genera! hrfonnatiorr for what is included with each registration category. ASN\\ 0 o w: Reglstratlon Form m I . h Value package includes admission to...

Note: This page contains sample records for the topic "form parts iv-vii" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

FORM EIA-28  

U.S. Energy Information Administration (EIA) Indexed Site

FORM EIA-28 - Financial Reporting System FORM EIA-28 - Financial Reporting System Sch 5111 Sch 5110 EIA-28 Financial Reporting System Sch 5100 -- Page 1 of 1 2010 Reporting Year January 2011 Instructions i Contents Updates to Instructions for Reporting Year 2009 ....................................................................................................................ii I. General Instructions ................................................................................................................................................................ 1 A. Purpose and Legislative Authority..................................................................................................................................... 1 B. Filing Requirements...........................................................................................................................................................

82

Anniversary Scholarship Application Form  

E-Print Network (OSTI)

at the University of Cambridge should complete the application form below and send it to The Pakistan Application Pakistan. Pakistan nationals who attend schools outside Pakistan are not eligible. 2. Applicants must complete the scholarship application form should be submitted to: The Pakistan Application Centre Cambridge

Travis, Adrian

83

FFSE Online Membership Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Donation Form for FFSE Donation Form for FFSE This form is for people who would like like to donate to FFSE, but not become a member. If you would like to join or renew membership in Fermilab Friends for Science Education., please go to the Membership Form. You have three options for donating. A contribution to the general fund A contribution to the scholarship fund The purchase of a leaf for the Tree of Knowledge ($1,000) Use the tab key to go between text boxes; the keystrokes,"Return" and "Enter," have been disabled to avoid submitting the form prematurely. Donation to the General Fund PayPal - The safer, easier way to pay online! Contribution to Scholarship Fund The scholarship fund provides scholarships to: Schools to cover the cost of bus transportation to Fermilab for field trips. The cost averages about $100.

84

Method for forming materials  

DOE Patents (OSTI)

A material-forming tool and a method for forming a material are described including a shank portion; a shoulder portion that releasably engages the shank portion; a pin that releasably engages the shoulder portion, wherein the pin defines a passageway; and a source of a material coupled in material flowing relation relative to the pin and wherein the material-forming tool is utilized in methodology that includes providing a first material; providing a second material, and placing the second material into contact with the first material; and locally plastically deforming the first material with the material-forming tool so as mix the first material and second material together to form a resulting material having characteristics different from the respective first and second materials.

Tolle, Charles R. (Idaho Falls, ID); Clark, Denis E. (Idaho Falls, ID); Smartt, Herschel B. (Idaho Falls, ID); Miller, Karen S. (Idaho Falls, ID)

2009-10-06T23:59:59.000Z

85

NIST Part 2.pmd  

Science Conference Proceedings (OSTI)

... 14 Spin Echo Spectrometer offering neV energy resolution, based upon Jlich design, sponsored by NIST, Jlich and ExxonMobil part of CHRNS ...

2003-11-10T23:59:59.000Z

86

PASS Form 22933  

NLE Websites -- All DOE Office Websites (Extended Search)

Private: The information contained on this form is considered private and for administrative use only. Do not copy or distribute. Private: The information contained on this form is considered private and for administrative use only. Do not copy or distribute. PASS Form Information Form: 22933 Title of Experiment: "Comparing Chlorpyrifos Levels in Commercial vs. Organic Parsley" Principal Investigator: Lucinda Hemmick Institution: Longwood Sr. High School Primary Field of Research: Environmental Sciences Type of Proposal: Rapid Access On-site Access: Experiment will be performed on-site, in person by the PI's experimenters. The PI (and approved experimenters) may also request remote computer access for operating equipment, data collection and retrieving data. Research Abstract of this experiment. This section will be used for funding agency reporting purposes. This information and the proposal title may become public information.:

87

SGP Shipment Notification Form  

NLE Websites -- All DOE Office Websites (Extended Search)

PlainsShipment Notification Form PlainsShipment Notification Form SGP Related Links Facilities and Instruments Central Facility Boundary Facility Extended Facility Intermediate Facility Radiometric Calibration Facility Geographic Information ES&H Guidance Statement Operations Science Field Campaigns Visiting the Site Fact Sheet Images Information for Guest Scientists Contacts Shipment Notification Form Note: Red text indicates a required field. Your Notification Form has been submitted. Section 1 : Initiator Information Date Afilliation Name Phone Number Email Section 2 : Vendor Information Ship From Point of Contact Address Phone Section 3 : Carrier Information Shipping Company Tracking/AWB Number Number of Boxes Approximate Weight for EACH BOX Expected Ship Date Section 4 : Shipment List Description System/Instrument

88

Form EIA-920 - 2005  

U.S. Energy Information Administration (EIA) Indexed Site

Administration Administration Form EIA-920 (2004/2005) COMBINED HEAT AND POWER PLANT REPORT INSTRUCTIONS Form Approval OMB No. 1905-0129 Approval Expires: 11/30/2007 PURPOSE Form EIA-920 Combined Heat and Power Plant Report collects information from combined heat and power (CHP) plants in the United States. Data collected on this form include electric power generation, fuel consumption, fuel heat content, and fossil fuel stocks. These data are used to monitor the status and trends of the electric power industry, and appear in many EIA publications, including: Electric Power Monthly and Annual, Monthly and Annual Energy Reviews, Natural Gas Monthly and Annual, Quarterly Coal Report, and the Renewable Energy Annual. Further information can be found at

89

Form EIA-861 Instructions  

U.S. Energy Information Administration (EIA) Indexed Site

ANNUAL ELECTRIC POWER ANNUAL ELECTRIC POWER INDUSTRY REPORT INSTRUCTIONS FORM EIA-861 OMB No. 1905-0129 Approval Expires: 12/31/2015 Burden: 9.0 hrs PURPOSE Form EIA-861 collects information on the status of electric power industry participants involved in the generation, transmission, and distribution of electric energy in the United States, its territories, and Puerto Rico. The data from this form are used to accurately maintain the EIA list of electric utilities, to draw samples for other electric power surveys, and to provide input for the following EIA reports: Electric Power Monthly, Monthly Energy Review, Electric Power Annual, Annual Energy Outlook, and Annual Energy Review. The data collected on this form are used to monitor the current status and trends of the electric power industry and to evaluate the future

90

ARM - VAP Suggestion Form  

NLE Websites -- All DOE Office Websites (Extended Search)

ProductsVAP Suggestion Form ProductsVAP Suggestion Form Showcase Data ARM Best Estimate Data Products (ARMBE) This is a collection of data products that represents "best estimates" derived from several instruments and/or VAPs. We are interested in your feedback; please contact us. VAP Update Information on new, existing, and future value-added products for July-September 2013 is now available. Have a VAP idea? Use this form to let us know. Datastream Status Further details on the status of VAPs being processed or developed, can be found at on the ARM Value-Added Product (VAP) Status web page. Use the Data File Inventory tool to view VAP data availability at the file level. Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send VAP Suggestion Form

91

Page 8, Benefit Forms  

NLE Websites -- All DOE Office Websites (Extended Search)

- 154 Kb - Allows an employee to designate a beneficiary for unpaid compensation (e.g. salary, annual leave or awards). TSP-1 - Thrift Savings Plan Election Form (Thrift Savings...

92

Chemical Forms of Uranium  

NLE Websites -- All DOE Office Websites (Extended Search)

such as water vapor in the air, the UF6 and water react, forming corrosive hydrogen fluoride (HF) and a uranium-fluoride compound called uranyl fluoride (UO2F2). For this reason,...

93

Registration Form PDF  

Science Conference Proceedings (OSTI)

City: State/Province: Zip/Postal Code: Country: Telephone: Fax: E-mail: adVaNCE REGiSTRaTioN FoRM advance Registration deadline: January 16, 2009. 8.

94

Nomination Form DEPARTMENT / UNIT  

E-Print Network (OSTI)

Nomination Form DEPARTMENT / UNIT: CAMPUS ADDRESS: CLASSIFICATION / TITLE: DEPARTMENT EMAIL ADDRESS: DEPARTMENT TELEPHONE: 2011 FRANKLIN STAFF SERVICE AWARDS START DATE IN DEPARTMENT / UNIT: ACTUAL NUMBER MEMBER DEADLINE: FRIDAY MARCH 4, 2011 ADDITIONAL COMMENTS: Signature of Head / Director of Nominee's Unit

Arnold, Jonathan

95

Nomination Form DEPARTMENT / UNIT  

E-Print Network (OSTI)

Nomination Form DEPARTMENT / UNIT: CAMPUS ADDRESS: CLASSIFICATION / TITLE: DEPARTMENT EMAIL ADDRESS: DEPARTMENT TELEPHONE: 2013 FRANKLIN STAFF SERVICE AWARDS START DATE IN DEPARTMENT / UNIT: ACTUAL NUMBER MEMBER DEADLINE: MARCH 5, 2013 ADDITIONAL COMMENTS: Signature of Head / Director of Nominee's Unit

Arnold, Jonathan

96

Nomination Form DEPARTMENT / UNIT  

E-Print Network (OSTI)

Nomination Form DEPARTMENT / UNIT: CAMPUS ADDRESS: CLASSIFICATION / TITLE: DEPARTMENT EMAIL ADDRESS: DEPARTMENT TELEPHONE: 2012 FRANKLIN STAFF SERVICE AWARDS START DATE IN DEPARTMENT / UNIT: ACTUAL NUMBER MEMBER DEADLINE: FRIDAY MARCH 2, 2012 ADDITIONAL COMMENTS: Signature of Head / Director of Nominee's Unit

Arnold, Jonathan

97

Nomination Form DEPARTMENT / UNIT  

E-Print Network (OSTI)

Nomination Form DEPARTMENT / UNIT: CAMPUS ADDRESS: CLASSIFICATION / TITLE: DEPARTMENT EMAIL ADDRESS: DEPARTMENT TELEPHONE: 2014 FRANKLIN STAFF SERVICE AWARDS START DATE IN DEPARTMENT / UNIT: ACTUAL NUMBER MEMBER DEADLINE: MARCH 7, 2014 ADDITIONAL COMMENTS: Signature of Head / Director of Nominee's Unit

Arnold, Jonathan

98

EEO Intake Form  

Energy.gov (U.S. Department of Energy (DOE))

Download and fill out this form to start the process for Equal Employment Opportunity complaints at the Department of Energy. For more information about the EEO process, visit this site.

99

2011 Form EIA-63B Instructions  

U.S. Energy Information Administration (EIA) Indexed Site

U. S. DEPARTMENT OF ENERGY Form Approved U.S. ENERGY INFORMATION ADMINISTRATION OMB No. 1905-0196 Washington, DC 20585 Expires: 12/31/2013 FORM EIA-63B ANNUAL PHOTOVOLTAIC CELL/MODULE SHIPMENTS REPORT GENERAL INFORMATION AND INSTRUCTIONS I. Purpose Form EIA-63B is designed to provide the data necessary for the U.S. Energy Information Administration (EIA), a part of the U.S. Department of Energy (DOE), to carry out its responsibilities tracking photovoltaic cell/module shipments in the photovoltaic industry and

100

Miscellaneous Waste-Form FEPs  

SciTech Connect

The US DOE must provide a reasonable assurance that the performance objectives for the Yucca Mountain Project (YMP) potential radioactive-waste repository can be achieved for a 10,000-year post-closure period. The guidance that mandates this direction is under the provisions of 10 CFR Part 63 and the US Department of Energy's ''Revised Interim Guidance Pending Issuance of New US Nuclear Regulatory Commission (NRC) Regulations (Revision 01, July 22, 1999), for Yucca Mountain, Nevada'' (Dyer 1999 and herein referred to as DOE's Interim Guidance). This assurance must be demonstrated in the form of a performance assessment that: (1) identifies the features, events, and processes (FEPs) that might affect the performance of the potential geologic repository; (2) examines the effects of such FEPs on the performance of the potential geologic repository; (3) estimates the expected annual dose to a specified receptor group; and (4) provides the technical basis for inclusion or exclusion of specific FEPs.

A. Schenker

2000-12-08T23:59:59.000Z

Note: This page contains sample records for the topic "form parts iv-vii" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Fixture for mounting small parts for processing  

DOE Patents (OSTI)

This invention is comprised of a fixture for mounting small parts, such as fusion target spheres or microelectronic components. A glass stalk is drawn and truncated near its tip. The truncated end of the glass stalk is dipped into silicone rubber forming an extending streamer. After the rubber cures for approximately 24 hours, a small part is touched to the streamer, and will be held securely throughout processing. 5 figs.

Foreman, L.R.; Gomez, V.M.; Thomas, M.H.

1988-09-29T23:59:59.000Z

102

Secretarial Award Nomination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Secretary's Awards Program Nomination Form Secretary's Awards Program Nomination Form 1. Type of Award (Check Applicable Box) Secretary's Honor Awards Secretary's Departure Awards Secretary's James R. Schlesinger Award Exceptional Service Award Appreciation Award Excellence Award Distinguished Service Award Achievement Award Meritorious Service Award 2. Nominee (Full) Name Check if Group list is attached (As it is to appear on the certificate) For Departure and Appreciation Awards Only 3. Certificate Date 4. Award Presentation Date 5. Current Position Title 6. Award Justification: Continue on blank sheet of paper and attach if you need more space. 7. Award Citation: A citation of no more than 20 lines must be attached to nomination form. 8 . Requesting Office : 9a. Local Approvals: One or more signatures is typical but not required

103

Form EIA-920 - 2005  

U.S. Energy Information Administration (EIA) Indexed Site

20 (2004/2005) 20 (2004/2005) |COMBINED HEAT AND POWER PLANT REPORT INSTRUCTIONS|Form Approval OMB No. 1905-0129 Approval Expires: 11/30/2007 | |PURPOSE|Form EIA-920 Combined Heat and Power Plant Report collects information from combined heat and power (CHP) plants in the United States. Data collected on this form include electric power generation, fuel consumption, fuel heat content, and fossil fuel stocks. These data are used to monitor the status and trends of the electric power industry, and appear in many EIA publications, including: Electric Power Monthly and Annual, Monthly and Annual Energy Reviews, Natural Gas Monthly and Annual, Quarterly Coal Report, and the Renewable Energy Annual. Further information can be found at

104

Technology Transfer Reporting Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

form is to be completed by the TTO for individual inquiry/case activity during the quarter as required form is to be completed by the TTO for individual inquiry/case activity during the quarter as required by the Technology Transfer Commercialization Act of 2000. Mouse over definitions and descriptions appear over text/check boxes where appropriate. After completing this form, click on the submit button. *If you have no TTO activity for the quarter, please fill in your name, FY and quarter, lab or facility and check the box "No Quarterly Activity". Initial Ombuds Contact: ____________________ Type: Inquiry Case Ombuds Name: __________________________ Time Spent: (Hours) ______________ Final Ombuds Involvement: _________________ Laboratory or Facility: AMES ANL BNL LBNL INL KCP LANL NREL LLNL NBL NETL PNNL NNSS ORNL PXSO SRNL

105

User Financial Account Form  

NLE Websites -- All DOE Office Websites (Extended Search)

URA REVISED 2/20/13 URA REVISED 2/20/13 User Financial Account Form Establish a user financial account at SLAC to procure gases, chemicals, supplies or services to support your experiment at SLAC's user facilities and to send samples, dewars, or other equipment between SLAC and your institution. To open or renew your SLAC user financial account, complete and submit this form along with a Purchase Order (PO) from your institution. The PO should be made to SLAC National Accelerator Laboratory for the amount of estimated expenditures (the suggested minimum is $1,000). Send this form with the PO (or a letter from the financial officer of your institution) to: Jackie Kerlegan (SSRL) or Theresa Wong (LCLS) User Research Administration, MS 99 User Research Administration, MS 99 SLAC National Accelerator Laboratory

106

Compute Reservation Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Queue Look Queue Wait Times Hopper Queues and Policies Edison Queues and Policies Carver Queues and Policies Dirac Queues and Policies Compute Reservation Request Form Job Logs & Analytics Training & Tutorials Software Accounts & Allocations Policies Data Analytics & Visualization Data Management Policies Science Gateways User Surveys NERSC Users Group User Announcements Help Operations for: Passwords & Off-Hours Status 1-800-66-NERSC, option 1 or 510-486-6821 Account Support https://nim.nersc.gov accounts@nersc.gov 1-800-66-NERSC, option 2 or 510-486-8612 Consulting http://help.nersc.gov consult@nersc.gov 1-800-66-NERSC, option 3 or 510-486-8611 Home » For Users » Queues and Scheduling » Compute Reservation Request Form Compute Reservation Request Form

107

Travel Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Lodging Lodging Transportation SNAP COLLABORATION MEETING JUNE 1 - 3, 2006 TRAVEL FUNDING REQUEST FORM If you require Travel funding support from LBNL to attend the SNAP Collaboration Meeting, please fill out the travel request form below and click on the "SEND" button. As an alternative, you can simply email the requested information on the form to snap@lbl.gov Deadline: Please submit your request NLT Wednesday, May 10, 2006. Disclaimer: Please note that the submission of this request does not automatically constitute funding approval. 1. First Name Last Name 2. Has this travel funding support been pre-approved by the SNAP management? Yes No 3. If answer to #2 is "Yes": a) Approval by whom? b) What was the maximum reimbursement amount from SNAP?

108

Research Input Form  

NLE Websites -- All DOE Office Websites (Extended Search)

HighlightsSubmit HighlightsSubmit Form Submit a New Research Highlight Sort Highlights Submitter Title Research Area Working Group Submission Date DOE Progress Reports Notable Research Findings for 2001-2006 Biological and Environmental Research Abstracts Database Research Highlights Summaries Research Highlight Submittal Form Tell us about your research! This form is designed to collect summary information about working group research results. If you have any questions or comments, please contact the administrators. Journal or Book Reference(s) (if applicable): Look Up Your reference from the Publications Database. Limit two references. If you have not submitted the references, please Add it now. Area of Research: Radiation Processes Cloud Distributions/Characterizations Surface Properties General Circulation and Single Column

109

DOE FOIA Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Administration FOIA Request Form Administration FOIA Request Form To make an Electronic FOIA (E-FOIA) request, please provide the information below. Failure to enter accurate and complete information may render your FOIA request impossible to fulfill. * Requests submitted under the Privacy Act must be signed and, therefore, cannot be submitted on this form. Name: (Required) Organization: Address: (Required) Phone: FAX: Email: Reasonably Describe Records Describe the specific record (s) you seek with sufficient detail that a knowledgeable official of the activity may locate the record with a reasonable amount of effort. Such detail should include: dates, titles, file designations, and offices to be searched. Since most DOE records are not retained permanently, the more information that you provide, the better the opportunity there is to determine if the

110

Document Control Template-Form  

NLE Websites -- All DOE Office Websites (Extended Search)

5ADocument Control Template - ExcelForm EOTA - Business Form Document Title: P-001, Document Control Process Document Number: Document Control Template - Excel Form EOTA...

111

Document Control Template-Form  

NLE Websites -- All DOE Office Websites (Extended Search)

4Document Control Template - Form 110815.doc 110815 Page 1 of 5 EOTA - Business Form Document Title: Document Control Template - Form Document Number: F-004 Rev. 110815...

112

Detecting alien life forms  

NLE Websites -- All DOE Office Websites (Extended Search)

Detecting alien life forms Detecting alien life forms Name: Brian S Foster Status: N/A Age: N/A Location: N/A Country: N/A Date: N/A Question: What would you do to find out if there is any life form on other planets? Replies: If you mean intelligent life, probably the best way would be to listen for radio messages, since you could do this from very far away. Earth emits as much radio energy as a small star --- very noticeable. If you mean just any kind of life it gets harder and you would have to send a robot or human in a spacecraft to visit. You could then look for the absorption of reflected light by oxygen molecules in the atmosphere. Oxygen is such a reactive molecule that it can only stay in the atmosphere if it is continually replenished by something, such as plants photosynthesizing. We cannot of course know that other life will build itself as does life on Earth, out of carbon-containing molecules which are formed by cracking apart carbon dioxide molecules with light energy (releasing oxygen). So the only sure way would probably be to land on the planet and look around. And even then you might well miss something

113

Form EIA-871A  

U.S. Energy Information Administration (EIA) Indexed Site

Approval Approval OMB No.: 1905-0145 Expires: 11/30/2002 Form EIA-871A U.S. Department of Energy Commercial Buildings Energy Consumption Survey for 1999 BUILDING QUESTIONNAIRE TABLE OF CONTENTS About This Questionnaire ...................................................................................................... 3 Section A. Building Size and Age Square Footage .................................................................................................... 5 Floors .................................................................................................................... 8 Year Constructed .................................................................................................. 9 Section B. Principal Building Activity

114

Clean Metal Spray Forming  

Science Conference Proceedings (OSTI)

controlled transfer of liquid metal from the ESR pool to the spray forming system is performed using a ... heating to maintain superheat and avoid freezing of the liquid metal as it flows through the funnel. ... As is the case with all similar cross-.

115

Nomination Form DEPARTMENT / UNIT  

E-Print Network (OSTI)

Nomination Form DEPARTMENT / UNIT: CAMPUS ADDRESS: JOB TITLE: DEPARTMENT EMAIL ADDRESS: DEPARTMENT TELEPHONE: 2014 FRANKLIN STAFF EXCELLENCE AWARDS START DATE IN DEPARTMENT / UNIT: Nominee Information NAME / RESEARCHPROFESSIONAL Signature of Head / Director of Nominee's Unit: NOMINATION PACKET DEADLINE: MARCH 7, 2014 PLEASE

Arnold, Jonathan

116

Nomination Form DEPARTMENT / UNIT  

E-Print Network (OSTI)

Nomination Form DEPARTMENT / UNIT: CAMPUS ADDRESS: JOB TITLE: DEPARTMENT EMAIL ADDRESS: DEPARTMENT TELEPHONE: 2012 FRANKLIN STAFF EXCELLENCE AWARDS START DATE IN DEPARTMENT / UNIT: Nominee Information NAME / RESEARCHPROFESSIONAL Signature of Head / Director of Nominee's Unit: NOMINATION PACKET DEADLINE: FRIDAY MARCH 2, 2012

Arnold, Jonathan

117

Nomination Form DEPARTMENT / UNIT  

E-Print Network (OSTI)

Nomination Form DEPARTMENT / UNIT: CAMPUS ADDRESS: JOB TITLE: DEPARTMENT EMAIL ADDRESS: DEPARTMENT TELEPHONE: 2011 FRANKLIN STAFF EXCELLENCE AWARDS START DATE IN DEPARTMENT / UNIT: Nominee Information NAME / RESEARCHPROFESSIONAL Signature of Head / Director of Nominee's Unit: NOMINATION PACKET DEADLINE: FRIDAY MARCH 4, 2011

Arnold, Jonathan

118

Nomination Form DEPARTMENT / UNIT  

E-Print Network (OSTI)

Nomination Form DEPARTMENT / UNIT: CAMPUS ADDRESS: JOB TITLE: DEPARTMENT EMAIL ADDRESS: DEPARTMENT TELEPHONE: 2013 FRANKLIN STAFF EXCELLENCE AWARDS START DATE IN DEPARTMENT / UNIT: Nominee Information NAME / RESEARCHPROFESSIONAL Signature of Head / Director of Nominee's Unit: NOMINATION PACKET DEADLINE: MARCH 5, 2013 PLEASE

Arnold, Jonathan

119

Tour Reservation Form  

Science Conference Proceedings (OSTI)

TOUR ORDER FORM. Tour Date. Time. Cost. # of Tickets. Total Cost. #1. Sunday 2/9. 1:00 PM - 5:30 PM. $24.00. #2. Monday 2/10. 9:00 AM - 12:30 PM. $9.00.

120

Fermilab Today - Announcements Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Announcements Form Announcements Form Subscribe | Contact Us | Archive | Classifieds | Guidelines | Help Search GO Fermilab Announcements policy Announcements must be submitted no later than 12 p.m. (noon) the day before the desired run date. Last-minute announcements will be considered on a case-by-case basis. To place an urgent announcement into Fermilab Today, please contact the Office of Communication at (630) 840-3351. Announcements will run from the time they are submitted until the selected expiration date, which may be no later than one month after the submission date. Anyone who would like to run his or her announcement for longer than one month will need to resubmit the announcement after the first submission expires. Fermilab Today staff will feature as many headlines as space permits in Fermilab Today and link to the announcements on the Announcements webpage.

Note: This page contains sample records for the topic "form parts iv-vii" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

2008 Form 3468  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

545-0155 545-0155 Investment Credit Form 3468 ᮣ Attach to your tax return. See instructions. Attachment Sequence No. 52 Identifying number Name(s) shown on return 1 For Paperwork Reduction Act Notice, see instructions. Form 3468 (2008) c × 30% (.30) × 30% (.30) 5 Cat. No. 12276E If you are claiming the investment credit as a lessee based on a section 48(d) (as in effect on November 4, 1990) election, provide the following information. If you acquired more than one property as a lessee, attach a statement showing the information below. (99) Name of lessor $ $ b $ $ Department of the Treasury Internal Revenue Service 2 5a 5b 5c × $1,000 5d 5e × 30% (.30) × $3,000 Kilowatt capacity of property in f above ᮣ g h Enter the lesser of line 5f or 5g 3 4 2008

122

STANDARD FORM NO. 64  

Office of Legacy Management (LM)

/qz-5 /qz-5 STANDARD FORM NO. 64 rl . . .' . , G Ojice Memoawl crl LA STATES GOVER pi,+ ip; ; / (' , TO : F. M . Belmore, M remtor, Produution Division DATE: Deomnber FROM : R. F. Van Wy TV Mvision of Teohnioal Advisers SUBJECT: R?IQUEST FOR&m SYMBOL: TA:RFV:rle For use under ooxrkraot AT-300l=Gen-72 at Columibia University, m request 6 pieoes Of A toleranoe of plus ordinary uranium out to the sizes listed below. or llliZlU8 l/16" i8 sati8faotory. P x 1u x 1" 1" x 1 !k x 1" tixl x1" 3P 4 x 12 x 1" ororr-se&ion of l;% x 1" are reque8ted, rq~are to 2" square are aomptable. Please 1. 1. Havena, Pupin Phy8ioe Laboratory, Columbia University, New York City. 2 pieoerr 2 piece8 2 pieoea 2 pieces Although pieces with a

123

Publication Submission Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Pages Pages publicationsubmission Sign In Launch the Developer Dashboard SLAC National Accelerator Laboratory DOE | Stanford | SLAC | SSRL | LCLS | AD | PPA | Photon Science | PULSE | SIMES LCLS : Linac Coherent Light Source An Office of Science User Facility Search this site... Search Help (new window) Top Link Bar LCLS Lasers Expand Lasers LCLS Quick Launch Home About LCLS Expand About LCLS LCLS News Expand LCLS News User Resources Expand User Resources Instruments Expand Instruments Proposals Publications Expand Publications Schedules Machine Status Machine FAQs Safety Organization Expand Organization Directories Expand Directories Staff Resources Contact Us All Site Content Department of Energy Page Content Publication Submission Form Th Tell LCLS about new publications Please submit this form to notify LCLS about new publications relating to

124

SAFETY SHOE ISSUANCE FORM  

NLE Websites -- All DOE Office Websites (Extended Search)

SAFETY SHOE ISSUANCE FORM SAFETY SHOE ISSUANCE FORM The employee named below is authorized to purchase one pair of protective footwear, rated by ASTM F 2413-05 (or ANSI Z41-1999) to protect against workplace hazards. The Laboratory will subsidize this protective footwear issuance up to the authorized annual limit of $150.00. □ The employee named below is authorized to purchase one pair of fatigue reducing shoe insoles. The Laboratory will subsidize this shoe insole issuance up to the authorized annual limit of $35.00. Note: Box must be checked to indicate supervisor approval of the purchase of fatigue reducing shoe insoles. Employee Name:__________________________ Project ID Number:__________ Employee ID Number:______________________ Payroll Deduction:___________

125

ORPS User Registration Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DEPARTMENT OF ENERGY DEPARTMENT OF ENERGY OPERATIONAL EVENT INFORMATION SYSTEMS REGISTRATION FORM User Registration For: ORPS SUBMIT TO: U.S. DOE: PHONE: 800-473-4375 HSS InfoCenter, HS-1.22, 270CC FAX: 301-903-9823 1000 Independence Ave., SW Washington, DC 20585-0270 (Type or Print) 1. Name__________________________________________________________________________Birth date_______/_______ (Last) (First) (Middle Initial) (Month) (Day) 2.JobTitle_______________________________________________________________________________________________ 3. Company Name________________________________________________________________________________________ 4. Address________________________________________________ Mail Stop______________________________________

126

How do viruses form?  

NLE Websites -- All DOE Office Websites (Extended Search)

How do viruses form? How do viruses form? Name: street Location: N/A Country: N/A Date: N/A Question: How do viruses form? Replies: Well, I'll assume you mean how they replicate, since they do not (as far as we know) arise from inorganic materials. Viruses are generally thought of as obligate parasites -- that is, they need the assistance of another organism for their survival. Depending on the type of virus you're looking at you'll see many different ways of accomplishing the same goal -- reproduction. In very general terms, then, a virus will attach itself to an appropriate host cell and insert it's genetic code into the DNA of the host, which then goes thorough it's normal routine of reading through its own code to synthesize proteins and enzymes, and in the process inadvertently replicates the strand of viral DNA (or RNA, depending), which codes for its own proteins and concentrates within the cell. At some point, the cell will not be able to support that many viral particles within it's membrane, and it will die, releasing thousands of new viral particles into the environment to do the dirty deed all over again.

127

Design Code Survey Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Design Code Survey Form Design Code Survey Form Design Code Survey Form Survey of Safety Software Used in Design of Structures, Systems, and Components 1. Introduction The Department's Implementation Plan for Software Quality Assurance (SQA) that was developed in response to Defense Nuclear Facilities Safety Board Recommendation 2002-01, Quality Assurance for Safety-Related Software, includes a commitment (4.2.1.5) to conduct a survey of design codes currently in use to determine if any should be included as part of the toolbox codes. Design Code Survey Form September 11, 2003 More Documents & Publications Technical Standards, Safety Analysis Toolbox Codes - November 2003 DOE G 414.1-4, Safety Software Guide for Use with 10 CFR 830 Subpart A, Quality Assurance Requirements, and DOE O 414.1C, Quality Assurance

128

Little Climates -- Part One  

NLE Websites -- All DOE Office Websites (Extended Search)

Part One Part One Nature Bulletin No. 478-A January 27, 1973 Forest Preserve District of Cook County George W. Dunne, President Roland F. Eisenbeis, Supt. of Conservation LITTLE CLIMATES -- Part One: Weather in the Soi. Climate vitally affects our lives. Wherever we live, climate has largely determined the plant and animal life in that region, the development of civilization there and what people do. The climate of any region represents its overall weather picture: the sum of its weather today, tomorrow, and during past centuries. We are accustomed to think of climate as a set of conditions occurring entirely in the atmosphere above the earth's surface, and it may sound silly when we say that there are climates underground -- little climates just as real as those above -- but it's true, There are special kinds of weather in the soil.

129

FORM EIA-846(F)  

U.S. Energy Information Administration (EIA) Indexed Site

No. 1905-0169: Approval Expires March 31,1989 No. 1905-0169: Approval Expires March 31,1989 FORM EIA-846(F) (6-S-86) U.S. DEPARTMENT OF COMMERCE .(djSS^X BUREAU OF THE CENSUS ^p^TlJ^v ACTING AS COLLECTING AND COMPILING AGENT FOR / NOTICE - Response to this inquiry is required by lew (Federal Energy Administration Act of 1 974, as amended, P.L. 93-275). By Section 9 of Title 1 3, U.S. Code, your report to the Census Bureau is

130

Plutonium microstructures. Part 1  

Science Conference Proceedings (OSTI)

This report is the first of three parts in which Los Alamos and Lawrence Livermore National Laboratory metallographers exhibit a consolidated set of illustrations of inclusions that are seen in plutonium metal as a consequence of inherent and tramp impurities, alloy additions, and thermal or mechanical treatments. This part includes illustrations of nonmetallic and intermetallic inclusions characteristic of major impurity elements as an aid to identifying unknowns. It also describes historical aspects of the increased purity of laboratory plutonium samples, and it gives the composition of the etchant solutions and describes the etching procedure used in the preparation of each illustrated sample. 25 figures.

Cramer, E.M.; Bergin, J.B.

1981-09-01T23:59:59.000Z

131

SSRL29 Abstract Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Users are invited to submit abstracts highlighting research activities conducted over the past year at SSRL for oral or poster presentation at the meeting. Posters will be displayed throughout the meeting and will be highlighted during a poster session and reception on Monday, October 7. Graduate students submitting posters must also register for the Users' Meeting and are eligible for one of the poster prizes. All posters require submission of this form no later than September 23 to guarantee space and inclusion in the program materials. Users are invited to submit abstracts highlighting research activities conducted over the past year at SSRL for oral or poster presentation at the meeting. Posters will be displayed throughout the meeting and will be highlighted during a poster session and reception on Monday, October 7. Graduate students submitting posters must also register for the Users' Meeting and are eligible for one of the poster prizes. All posters require submission of this form no later than September 23 to guarantee space and inclusion in the program materials. Please Note: Fields marked with require entry. General Presentation Information Please select a presentation type: Oral Presentation Poster Presentation Invited Presentation: Users' Meeting Invited Presentation: Workshop Speaker

132

MPIF Parts Recognition  

Science Conference Proceedings (OSTI)

...ultimate tensile strength of 296 MPa (43 ksi). Brass forging, stainless casting, and zinc die casting were also considered, but could not approach the economies of powder metallurgy. The part also provides high hardness, wear resistance, and net shape. The new mortise lock design can change function...

133

SSRL28 Registration Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Need more information? Contact: Cathy Knotts Manager, URA SSRL, MS 99 2575 Sand Hill Road Menlo Park, CA 94025 28th Annual Stanford Synchrotron Radiation Laboratory Users' Meeting Menlo Park, California USA October 17-19, 2001 Registration Form -- CLOSED -- Full Name: Institution: Address: City: State: Zip Code: Country: Phone: Fax: E-mail: Citizenship: Registration: The Registration fee includes meeting materials, invited talks, poster presentations, and vendor exhibits. Registration ($150) Student Registration ($50) Users' Mtg. Invited Speaker Workshop Only (click here & see below) Meals and Social Events: Please specify quantity of tickets desired and if vegetarian meal preferred. Select 1-Regular 1-Vegetarian 2-Regular 2-Vegetarian 2-(1 of each) Lunch, Oct. 18 ($8 per person)

134

Form EIA-851Q  

U.S. Energy Information Administration (EIA) Indexed Site

ITEM 1: FACILITY INFORMATION ITEM 1: FACILITY INFORMATION Name: County: State: Owner: Type: Rated Capacity: Operating Status: ITEM 2: PRODUCTION Pounds U 3 O 8 October-2013 November-2013 December-2013 Total = 0.0 ITEM 3: PRODUCTION SOURCE Mine name(s) Pounds U 3 O 8 Other type: Pounds U 3 O 8 Total = 0.0 COMMENTS All other information you provide will be used for statistical purposes only. In accordance with the Confidential Information Protection provisions of Title V, Subtitle A of Public Law 107-347 and other applicable Federal laws, your responses will be kept confidential and will not be disclosed in identifiable form to anyone other than employees or agents without your consent. By law, every EIA employee, as well as every agent, is subject to a jail term, a fine of up to $250,000, or both if he or she discloses ANY identifiable

135

Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ergy ergy Categorical Exclusion Determination Form Proposed Action Title: (0472-1569) G~tomics - Double Sator Switched Reluctance Motor (DSSRM) Technology Progi'am or Field Office: Advanced Research Projects Agency - Energy Location(s) (City/County/State): San Diego, CA Proposed Action Description: General Atomics, in conjunction with the University of Texas-Dallas (UT Dallas), proposes to develop double-stator switched reluctance motor (DSSRM) for electric vehicles (EVs) that will eliminate the use of permanent magnet-based motors that rely on rare earth metals in EVs. General Atomics' application was selected for an initial 18-month period (Phase 1) of funding. The ARPA-E Program Director may decide to negotiate and fund project activities for an additional 18-month period (Phase II) after evaluating the work performed in Phase I. ARPA-E has not obligated

136

FORM EIA-846C  

U.S. Energy Information Administration (EIA) Indexed Site

No. 1905-0169: Approval Expires 04/30/91 No. 1905-0169: Approval Expires 04/30/91 FORM EIA-846C (5-1 89) U.S. DEPARTMENT Of COMMERCE BUREAU OF THE CENSUS ACTING AS COLLECTING AND COMPILING AGENT FOR UNITED STATES DEPARTMENT OF ENERGY ENERGY INFORMATION ADMINISTRATION Public reporting burden for this collection of information is estimated to average 8 hours per response, including the time of reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to the Energy Information Administration, Office of Statistical Standards, El-73, Mail Station: 1H-023 Forrestal, 1000 Independence Avenue, SW, Washington, DC 20485; and to the Office of Information and

137

Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

t t Categorical Exclusion Determination Form Proposed Action Title: (0471-1563) University of South Florida - Development of a Low Cost Thermal Energy Storage System Using Phase Change Materials with Enhanced Radiation Heat Transfer Program or Field Office: Advanced Research Projects Agency - Energy Location(s) (City/County/State): Tampa, FL Proposed Action Description: Funding will support development of low cost, industrially scalable capsules containing high-temperature phase change materials (PCMs) for use in thermal energy storage (TES) systems to enable continuous power supply from concentrated solar thermal and nuclear power plants. No nuclear research and development activities will take place under this project. ARPA-E has undertaken a review of the work to be performed

138

Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

n rgy n rgy Categorical Exclusion Determination Form Proposed Action Title: (0474-1555) University of Colorado - Boulder - Wafer-Level Sub-Module Integrated DCfDC Converter Program or Field Office: Advanced Research Projects Agency - Energy LocationCs) CCity/County/State): Colorado, Maine, Virginia Proposed Action Description: Funding will support development of a planar, wafer-level sub-module integrated converter (SubMIC) device that can be integrated into various types of photovoltaic (PV) modules to enable low-cost maximum power point tracking at high power processing efficiencies. Proposed work consists of indoor laboratory-based research and development (R&D), microfabrication activities, and analytical research, including: (1) simulated modeling and design of SubMIC components and integrated units, (2) development, fabrication, testing, and optimization

139

EOTA … Business Form  

NLE Websites -- All DOE Office Websites (Extended Search)

1 Internal Audit Report 11_0304 Page 1 of 3 1 Internal Audit Report 11_0304 Page 1 of 3 EOTA - Business Form Document Title: Internal Audit Report Document Number: F-011 Rev. 11_0304 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: P-007, Internal Audit Process Notify of Changes: Internal Auditors Referenced Document(s): N/A F-011 Internal Audit Report 11_0304 Page 2 of 3 Revision History: Rev. Description of Change A Initial Release 08_0502 Added "(PAR or IO may be required)" to Opportunity for Improvement section. 11_0304 Added Recommendation and Action Item Area F-011 Internal Audit Report 11_0304 Internal Audit Report Audit #: Lead Auditor: Audit Date: Audit Team: Document # Audited: Standard / Criteria Used:

140

Form EIA-861 Instructions  

U.S. Energy Information Administration (EIA) Indexed Site

ANNUAL ELECTRIC POWER ANNUAL ELECTRIC POWER INDUSTRY REPORT Form EIA-861 OMB No. 1905-0129 Approval Expires: 12/31/2015 Burden: 9 Hours NOTICE: This report is mandatory under the Federal Energy Administration Act of 1974 (Public Law 93-275). Failure to comply may result in criminal fines, civil penalties and other sanctions as provided by law. For further information concerning sanctions and data protections see the provisions on sanctions and the provisions concerning the confidentiality of information in the instructions. Title 18 U.S.C. 1001 makes it a criminal offense for any person knowingly and willingly to make to any Agency or Department of the United States any false, fictitious, or fraudulent statements as to any matter within its jurisdiction.

Note: This page contains sample records for the topic "form parts iv-vii" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

EOTA … Business Form  

NLE Websites -- All DOE Office Websites (Extended Search)

ISDF 042 Validation and Acceptance 11_0414 Page 1 of 4 ISDF 042 Validation and Acceptance 11_0414 Page 1 of 4 EOTA - Business Form Document Title: Validation and Acceptance Document Number: ISDF -042 Rev. 11_0414 Document Owner: Vickie Pleau Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: ISDP-002 Training Production Process Notify of Changes: MGT, ISD, QAM Referenced Document(s): ISDF-010 After Action Report ISDF 042 Validation and Acceptance 11_0414 Page 2 of 4 Revision History: Rev . Description of Change 10_0630 Initial Release 11_0414 Deleted FMT final Course Acceptance block ISDF 042 Validation and Acceptance 11_0414 Page 3 of 4 Course Validation and Acceptance Validation denotes the product meets customer operational expectations in the medium which it

142

EOTA … Business Form  

NLE Websites -- All DOE Office Websites (Extended Search)

4 New Employee Checklist 10_0806.docx Page 1 of 5 4 New Employee Checklist 10_0806.docx Page 1 of 5 EOTA - Business Form Document Title: New Employee Checklist Document Number: MGTF-004 Rev. 10_0806 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: MGTP-002, Skill Set / Training Process Notify of Changes: EOTA Managers Referenced Document(s): N/A MGTF-004 New Employee Checklist 10_0806.docx Page 2 of 5 Revision History: Rev. Description of Change A Initial Release B Changes made 2/28/08 08_0411 Added New Hire Orientation Course to checklist, added guidance for completion of checklist 09_0409 Updated "Responsible Person" on checklist. 09_0421 Added "Initiate/Update U.S. Access profile" as a new FMT responsibility. Renumbered checklist items.

143

Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

y y Categorical Exclusion Determination Form Proposed Action Title: (0471-1595) Regents of the University of Minnesota - Thermal Fuel: Solar Fuels via Partial Redox Cycles with Heat Recovery Program or Field Office: Advanced Research Projects Agency - Energy LocationCs) CCity/County/State): Minnesota, California, and Colorado. Proposed Action Description: Funding will support development of a dual zone solar thermochemical reactor to produce fuel using ceria-based reactive materials in partial redox cycles and high heat recovery levels through counter-circulation of solid state components. Proposed work consists of indoor laboratory-based research and development, including: (1) designing, fabricating, and characterizing an optimized ceria-based reactive element for use in the reactor to enable maximum fuel productivity and durability; (2) designing and fabricating a

144

Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

of n y of n y Categorical Exclusion Determination Form Proposed Action Title: (0471-1607) University of Florida - Solar Thermochemical Fuel Production via a Novel Low Pressure, Magnetically Stabilized, Non-Volatile Iron Oxide Looping Process Program or Field Office: Advanced Research Projects Agency - Energy LocationCs) CCity/County/State): Gainesville, FL Proposed Action Description: University of Florida proposes to develop a novel solar thermochemical reactor with inputs of water, recycled carbon dioxide (C02), and concentrated solar energy to cost-effectively produce Syngas, a renewable, carbon-neutral fuel. Project activities will include: (1) modeling, design, and fabrication of a high efficiency 1 OkW reactor prototype; (2) test analysis of bench-scale

145

Spray-formed tooling  

SciTech Connect

The United States Council for Automotive Research (USCAR) has formed a partnership with the Idaho National Engineering Laboratory (INEL) to develop a process for the rapid production of low-cost tooling based on spray forming technology developed at the INEL. Phase 1 of the program will involve bench-scale system development, materials characterization, and process optimization. In Phase 2, prototype systems will be de signed, constructed, evaluated, and optimized. Process control and other issues that influence commercialization will be addressed during this phase of the project. Technology transfer to USCAR, or a tooling vendor selected by USCAR, will be accomplished during Phase 3. The approach INEL is using to produce tooling, such as plastic injection molds and stamping dies, combines rapid solidification processing and net-shape materials processing into a single step. A bulk liquid metal is pressure-fed into a de Laval spray nozzle transporting a high velocity, high temperature inert gas. The gas jet disintegrates the metal into fine droplets and deposits them onto a tool pattern made from materials such as plastic, wax, clay, ceramics, and metals. The approach is compatible with solid freeform fabrication techniques such as stereolithography, selective laser sintering, and laminated object manufacturing. Heat is extracted rapidly, in-flight, by convection as the spray jet entrains cool inert gas to produce undercooled and semi-solid droplets. At the pattern, the droplets weld together while replicating the shape and surface features of the pattern. Tool formation is rapid; deposition rates in excess of 1 ton/h have been demonstrated for bench-scale nozzles.

McHugh, K.M.; Key, J.F.

1994-12-31T23:59:59.000Z

146

A Review, Part II  

E-Print Network (OSTI)

This paper is the second of a two-part review of methods for automated fault detection and diagnostics (FDD) and prognostics whose intent is to increase awareness of the HVAC&R research and development community to the body of FDD and prognostics developments in other fields as well as advancements in the field of HVAC&R. The first part of the review focused on generic FDD and prognostics, provided a framework for categorizing methods, described them, and identified their primary strengths and weaknesses (Katipamula and Brambley 2005). In this paper we address research and applications specific to the fields of HVAC&R, provide a brief discussion on the current state of diagnostics in buildings, and discuss the future of automated diagnostics in buildings.

Prognostics For Building Systems; Srinivas Katipamula; Phd Michael; R. Brambley

2004-01-01T23:59:59.000Z

147

Clause Matrix Part 1  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

23 23 K Clause Matrix for Department Of Energy Management and Operating Contracts Part I - FAR Clauses (Thru FAC 05-08 and DEAR Final Rule dated November 25, 2005) (1/10/2006) KEY: R = Required A = Required when applicable O = Optional M&O = Management and Operating contract UCF = Uniform Contract Format General instruction: Set forth below are clauses prescribed in FAR Part 52 (identified in the FAR Matrix for use in CR R&D, CR SVC, or CR CON contracts) which are to be used in DOE M&O contracts. This listing does not include solicitation provisions. FAR Clause Number Title Secondary DEAR Clause Citation M&O For Profit M&O Non- Profit UCF Prescribed In FAR Prescription/Notes 52.202-1 Definitions

148

New Employee Orientation- Forms Checklist  

Energy.gov (U.S. Department of Energy (DOE))

Listing of the forms to be issued and collected at a new employee's orientation. Please review the checklist to ensure that you bring all of the needed forms.

149

Radiation Safety Work Control Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Radiation Safety Work Control Form (see instructions on pg-2) Rev July-2012 Area: Form : Date: Preliminary Applicability Screen: (a) Will closing the beam line injection stoppers...

150

2011 Form EIA-63A Instructions  

U.S. Energy Information Administration (EIA) Indexed Site

U. S. DEPARTMENT OF ENERGY U. S. DEPARTMENT OF ENERGY Form Approved U.S. ENERGY INFORMATION ADMINISTRATION OMB No. 1905-0196 Washington, DC 20585 Expires: 12/31/2013 FORM EIA-63A ANNUAL SOLAR THERMAL COLLECTOR/REFLECTOR SHIPMENTS REPORT GENERAL INFORMATION AND INSTRUCTIONS I. Purpose Form EIA-63A is designed to provide the data necessary for the U.S. Energy Information Administration (EIA), a part of the U.S. Department of Energy (DOE), to carry out its responsibilities tracking collector/reflector shipments in the solar thermal industry and reporting information concerning the size and status of the industry. The data collected will be published in the Renewable Energy Annual and also be available through EIA's Internet site at http://www.eia.gov/fuelrenewable.html.

151

Waste form product characteristics  

SciTech Connect

The Department of Energy has operated nuclear facilities at the Idaho National Engineering Laboratory (INEL) to support national interests for several decades. Since 1953, it has supported the development of technologies for the storage and reprocessing of spent nuclear fuels (SNF) and the resultant wastes. However, the 1992 decision to discontinue reprocessing of SNF has left nearly 768 MT of SNF in storage at the INEL with unspecified plans for future dispositioning. Past reprocessing of these fuels for uranium and other resource recovery has resulted in the production of 3800 M{sup 3} calcine and a total inventory of 7600 M{sup 3} of radioactive liquids (1900 M{sup 3} destined for immediate calcination and the remaining sodium-bearing waste requiring further treatment before calcination). These issues, along with increased environmental compliance within DOE and its contractors, mandate operation of current and future facilities in an environmentally responsible manner. This will require satisfactory resolution of spent fuel and waste disposal issues resulting from the past activities. A national policy which identifies requirements for the disposal of SNF and high level wastes (HLW) has been established by the Nuclear Waste Policy Act (NWPA) Sec.8,(b) para(3)) [1982]. The materials have to be conditioned or treated, then packaged for disposal while meeting US Environmental Protection Agency (EPA) and Nuclear Regulatory Commission (NRC) regulations. The spent fuel and HLW located at the INEL will have to be put into a form and package that meets these regulatory criteria. The emphasis of Idaho Chemical Processing Plant (ICPP) future operations has shifted toward investigating, testing, and selecting technologies to prepare current and future spent fuels and waste for final disposal. This preparation for disposal may include mechanical, physical and/or chemical processes, and may differ for each of the various fuels and wastes.

Taylor, L.L.; Shikashio, R.

1995-01-01T23:59:59.000Z

152

_Part II - Contract Clauses  

National Nuclear Security Administration (NNSA)

M515 dated 9/9/13 M515 dated 9/9/13 Contract DE-AC04-94AL85000 Modification No. M202 Part II - Contract Clauses Section I TABLE OF CONTENTS 1. FAR 52.202-1 DEFINITIONS (JAN 2012) (REPLACED M473) ............................................................... 8 2. FAR 52.203-3 GRATUITIES (APR 1984)..................................................................................................... 8 3. FAR 52.203-5 COVENANT AGAINST CONTINGENT FEES (APR 1984) ............................................. 9 4. FAR 52.203-6 RESTRICTIONS ON SUBCONTRACTOR SALES TO THE GOVERNMENT (SEP 2006) (REPLACED M264) ............................................................................................................................ 10 5. FAR 52.203-7 ANTI-KICKBACK PROCEDURES (OCT 2010) (REPLACED M443) ......................... 10

153

The University of Texas at Austin Jan07 PART I CRIMES Reported Unfounded Actual Cleared % Clrd.  

E-Print Network (OSTI)

The University of Texas at Austin Jan07 PART I CRIMES Reported Unfounded Actual Cleared.1% DP Form #31 Page 1(Rev. 1/93) #12;The University of Texas at Austin Jan07 PART I CRIMES BURGLARY Form #31 Page 2(Rev. 1/93) #12;The University of Texas at Austin Jan07 PART I CRIMES BURGLARY

Johns, Russell Taylor

154

Form EIA-1605 Long Form for Voluntary Reporting of Greenhouse ...  

U.S. Energy Information Administration (EIA)

Section 8, Carbon Sequestration. Completing Part III. Sinks and Sequestration (A) Substance: The list of substances on which you may report is provided.

155

Draft ERUS 2014 OMB Supporting Statement, Part B  

Gasoline and Diesel Fuel Update (EIA)

NUMBER 1905-0129 SUPPORTING STATEMENT, PART B NUMBER 1905-0129 SUPPORTING STATEMENT, PART B i Supporting Statement for Survey Clearance: Electric Power and Renewable Surveys Part B: Collection of Information Employing Statistical Methods Assistant Administrator for Energy Statistics | Office of Electricity, Renewables & Uranium Statistics OMB Number 1905-0129 Independent Statistics & Analysis www.eia.gov U.S. Department of Energy Washington, DC 20585 FORM EIA-63B, Annual Photovoltaic Cell/Module Shipments Report FORM EIA-411, Coordinated Bulk Power Supply Program Report FORM EIA-826, Monthly Electric Utility Sales and Revenue Report with State Distributions FORM EIA-860, Annual Electric Generator Report FORM EIA-860M, Monthly Update to the Annual Electric Generator Report

156

DOE F 13258e Etectromc Form Approved by Forms Mgml. 04119  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

e Etectromc Form Approved by Forms Mgml. 04119 e Etectromc Form Approved by Forms Mgml. 04119 12006 (08-89) United States Government Department of Energy Bonneville Power Administration memorandum DATE ; Cl 2 7 ZDac REPLY TO AnN OF: KEPR-Bell-l SUBJECT: Environmental Cleareance Memorandum TO : Larry Benzinger - TFSF-Bell Loren Cummings - TFSF-Bell TLM Foreman III TLM Foreman I Proposed Action: Construct landings and access roads in support of wood pole replacement activities along the Spirit Tap to Colville-Boundary #1 Transmission Line . PP&A Project No.: PP&A 1267 Budget Information: WO# 188846 Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B1.3 Routine maintenance/custodial services for buildings, structures , infrastructures (e .g., pathways, roads, and railroad s) and equipment

157

Ex Parte Memorandum  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Tuesday, April 10, 2012, members of the Office of Security Policy and Office of Tuesday, April 10, 2012, members of the Office of Security Policy and Office of Physical Protection, both within the Department of Energy's Office of Health, Safety and Security, met with members of senior management team from the contractor providing protective force services for the Department of Energy Headquarters Forrestal and Germantown buildings. Participants to the meeting were as follows: Bill Dwyer, DOE Office of Physical Protection John Cronin, DOE Office of Security Policy Dave Dietz, DOE Office of Security Policy Mark Jamsay, Paragon Technical Services Terry Cuba, Paragon Technical Services DOE staff provided opening remarks. DOE noted that since the public comment period for the proposed amendments to 10 CFR Part 1046 is still open, areas of specific concern

158

Parts of Quantum States  

E-Print Network (OSTI)

It is shown that generic N-party pure quantum states (with equidimensional subsystems) are uniquely determined by their reduced states of just over half the parties; in other words, all the information in almost all N-party pure states is in the set of reduced states of just over half the parties. For N even, the reduced states in fewer than N/2 parties are shown to be an insufficient description of almost all states (similar results hold when N is odd). It is noted that Real Algebraic Geometry is a natural framework for any analysis of parts of quantum states: two simple polynomials, a quadratic and a cubic, contain all of their structure. Algorithmic techniques are described which can provide conditions for sets of reduced states to belong to pure or mixed states.

Nick S. Jones; Noah Linden

2004-07-15T23:59:59.000Z

159

Parts of quantum states  

Science Conference Proceedings (OSTI)

It is shown that generic N-party pure quantum states (with equidimensional subsystems) are uniquely determined by their reduced states of just over half the parties; in other words, all the information in almost all N-party pure states is in the set of reduced states of just over half the parties. For N even, the reduced states in fewer than N/2 parties are shown to be an insufficient description of almost all states (similar results hold when N is odd). It is noted that real algebraic geometry is a natural framework for any analysis of parts of quantum states: two simple polynomials, a quadratic and a cubic, contain all of their structure. Algorithmic techniques are described which can provide conditions for sets of reduced states to belong to pure or mixed states.

Jones, Nick S.; Linden, Noah [Department of Mathematics, University of Bristol, University Walk, Bristol BS8 1TW (United Kingdom)

2005-01-01T23:59:59.000Z

160

_PART I - THE SCHEDULE  

National Nuclear Security Administration (NNSA)

15 dated 9/9/13 Contract No. DE-AC04-94AL85000 15 dated 9/9/13 Contract No. DE-AC04-94AL85000 Modification No. M202 Part I - The Schedule Sections B through H TABLE OF CONTENTS B-1 SERVICES BEING ACQUIRED ...................................................................................... 4 B-2 CONTRACT TYPE AND VALUE (Rev. M218, M222, M236, M241, M261, M266, M288, M293, M312, M319, M344, M365, M400, M404, M443, M448, M473, M484, M0512, A0514) ............................................................................................................................ 4 B-3 AVAILABILITY OF APPROPRIATED FUNDS ................................................................. 8 B-9999 AMERICAN RECOVERY AND REINVESTMENT ACT WORK VALUES (Added M331; Modified: A335, A336, A340, A341, A342, A346, A347, A348, A349, A350,

Note: This page contains sample records for the topic "form parts iv-vii" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Ex Parte Memorandum  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Wednesday, March 14, 2012, members of the Protective Forces Career Options Wednesday, March 14, 2012, members of the Protective Forces Career Options Committee (PFCOC) met to discuss proposed changes to 10 CFR part 1046, which was published in the Federal Register on March 6, 2012 (77 FR 13206). 1 Participants to the meeting were as follows: Donald Barnes, DOE Office of Nuclear Energy Jason Brown, NCSP Oak Ridge John Cronin, DOE Office of Health, Safety and Security Jeffrey Cutler, Wohlner, Kaplon, Phillips, Young & Cutler (on behalf of NCSP) Dave Dietz, DOE Office of Health, Safety and Security Ken Freeman, DOE, Los Alamos National Laboratory Doug Fremont, DOE, National Nuclear Security Administration Steve Gibbs, WSI Rex A. Harding, NCSP, UPPSR Local 12S Martin Hewitt, NCSP, UPPSR Local 12S Rod Johnson, Pantex

162

DOE Form 1322.4  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2.4 2.4 (09-98) All other editions are obsolete. Instructions: Forward completed checklist/approval form(s) to your organizational Forms Manager for review and coordination of approval. Forms are approved by HR-41. U.S. DEPARTMENT OF ENERGY FORMS CHECKLIST / APPROVAL I. ANALYSIS II. DESIGN, PRINTING AND STORAGE 1. TYPE OF FORM / REPORT 4. DATA COLLECTION 2. TITLE 5. Current Form No.: 6. Prescribing Directive: 3. FREQUENCY OF USE Single Daily Weekly Quarterly Monthly Annually Semi-Annually New Revision Cancellation Yes No 7. Purpose and content of form / report have been reviewed, and are reasonable and in keeping with the function of the originating organization. Y N 9. Format is arranged in effective manner with data elements in logical sequence according to workflow or types of source documents.

163

SSRL Computer Account Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

SSRLLCLS Computer Account Request Form August 2009 Fill in this form and sign the security statement mentioned at the bottom of this page to obtain an account. Your Name:...

164

Part B - Requirements & Funding Information PART B - Requirements...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

authorities) B.3. Part B Identifier If this is a new IA, then leave this blank. After STRIPES creates the IA identifier number, the number will appear in Part A Section A.3....

165

Part B - Requirements & Funding Information PART B - Requirements...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

authorities B.3. Part B Identifier If this is a new IA, then leave this blank. After STRIPES creates the IA identifier number, the number will appear in Part A Section A.3....

166

Matryoshka of Special Democratic Forms  

E-Print Network (OSTI)

Special p-forms are forms which have components \\phi_{\\mu_1...\\mu_p} equal to +1,-1 or 0 in some orthonormal basis. A p-form \\phi\\in \\Lambda^p R^d is called democratic if the set of nonzero components {\\phi_{\\mu_1...\\mu_p}} is symmetric under the transitive action of a subgroup of O(d,Z) on the indices {1,...,d}. Knowledge of these symmetry groups allows us to define mappings of special democratic p-forms in d dimensions to special democratic P-forms in D dimensions for successively higher P \\geq p and D \\geq d. In particular, we display a remarkable nested stucture of special forms including a U(3)-invariant 2-form in six dimensions, a G_2-invariant 3-form in seven dimensions, a Spin(7)-invariant 4-form in eight dimensions and a special democratic 6-form \\Omega in ten dimensions. The latter has the remarkable property that its contraction with one of five distinct bivectors, yields, in the orthogonal eight dimensions, the Spin(7)-invariant 4-form. We discuss various properties of this ten dimensional form.

Chandrashekar Devchand; Jean Nuyts; Gregor Weingart

2008-12-16T23:59:59.000Z

167

Part I, DAA Overview  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

AO Role-Based Training AO Role-Based Training Office of the Chief Information Officer Objectives Gain Understanding and Working Knowledge of: AO Authority, Role and Responsibilities AO Structure Key Cyber Security Terms Cyber Security Program Management Structure Policy Hierarchy Risk Management Framework and Certification & Accreditation Process Relationship Accreditation Forms, Boundaries, Common Controls and Inheritance AO C&A Package Review Accreditation Decision Continuous Monitoring Office of the Chief Information Officer Who is the AO? Authorizing Official (AO)  Senior DOE Managers are AOs by DOE Order  Can delegate AO authority to other Federal Employee(s)  Delegation must be in writing - by name or position  Delegated AO cannot re-delegate the authority  AO authority covers all Operating Units under his/her

168

Part I, DAA Overview  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

AODR Role-Based Training AODR Role-Based Training Office of the Chief Information Officer Objectives Gain Understanding and Working Knowledge of: AODR Authority, Role and Responsibilities Key Cyber Security Terms Cyber Security Program Management Structure Policy Hierarchy Risk Management Framework and Certification and Accreditation Process Relationship Pre-AO C&A Package Review Accreditation Forms, Boundaries and Common Controls and Inheritance Accreditation Decision and Package Transmission Continuous Monitoring Office of the Chief Information Officer Who is the AODR?  Authorizing Official Designated Representative (AODR)  AODRs are appointed by the AO  AODR function can be performed by AO  AODR role is not a required role by DOE Order or National policy  If AODR position is appointed it can be filled by one

169

Delhi-- one city multiple destinies : impact of the metro rail on urban form  

E-Print Network (OSTI)

Cities grow and with it urban form, unique to each, keeps evolving. Delhi can be perceived as having a poly centric, poly-nodal, radial city structure and a circumferential and partly sectoral form. World over, cities have ...

Bagley, Saurabh, 1978-

2003-01-01T23:59:59.000Z

170

INTRODUCTION PART I 11 Introduction Part I Solid State NMR  

E-Print Network (OSTI)

10 PART I #12;INTRODUCTION ­ PART I 11 Introduction Part I ­ Solid State NMR OVERVIEW Nuclear magnetic resonance (NMR) spectroscopy can provide atomic-resolution structures of biological molecules. The exact resonance frequency depends on the chemical environment of each spins, as a result the NMR

Watts, Anthony

171

Classroom Projects -- Part One  

NLE Websites -- All DOE Office Websites (Extended Search)

One One Nature Bulletin No. 609 September 17, 1960 Forest Preserve District of Cook County Daniel Ryan, President Roberts Mann, Conservation Editor David H. Thompson, Senior Naturalist CLASSROOM PROJECTS -- PART ONE The essence, the fundamental purpose, of the outdoor education program conducted by our department is stated briefly in the introductory words of a book -- Natural Science Through the Seasons, by J. A. Partridge -- which we use and recommend for teachers: "To initiate children into the romance and wonder of science, and to enhance their natural desire to get to know the world around them and find an explanation of its phenomena. In this bulletin are a few examples of many projects that appeal to younsters and have proven successful in giving pupils more insight into their surroundings, including the flora and fauna, than can be obtained solely from books. These brief outlines are offered as starting points in areas of exploration and study. They may be supplemented by use of our nature bulletins, Partridge's book, the Golden Nature Guides, and publications by agencies such as the Illinois State Museum and the Illinois Office of Public Instruction.

172

Document Control Template-Form  

NLE Websites -- All DOE Office Websites (Extended Search)

2 Key Check-Out Form 10_0823 Page 1 of 3 2 Key Check-Out Form 10_0823 Page 1 of 3 EOTA - Business Form Document Title: Key Check-Out Form Document Number: MGTF-012 Rev. 10_0823 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: MGTP-003, Control of Customer Property Notify of Changes: MGT, ADM Referenced Document(s): N/A MGTF-012 Key Check-Out Form 10_0823 Page 2 of 3 Revision History: Rev. Description of Change 10_0823 Initial Release MGTF-012 Key Check-Out Form 10_0823 NATIONAL NUCLEAR SECURITY ADMINISTRATION Emergency Operations Training Academy Key Check-Out Form Name: Initial Suite Key: Date returned: Furniture Key: Date returned: Building Key: Date returned: Other Key(s): Date returned:

173

Document Control Template-Form  

NLE Websites -- All DOE Office Websites (Extended Search)

7 Equipment Check-Out Form 08_0411 Page 1 of 3 7 Equipment Check-Out Form 08_0411 Page 1 of 3 EOTA - Business Form Document Title: Equipment Check-Out Form Document Number: MGTF-007 Rev. 08_0411 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: MGTP-003, Control of Customer Property Notify of Changes: MGT, ADM Referenced Document(s): N/A MGTF-007 Equipment Check-Out Form 08_0411 Page 2 of 3 Revision History: Rev. Description of Change A Initial Release 08_0411 Footer removed as document is for internal use only MGTF-007 Equipment Check-Out Form 08_0411 NATIONAL NUCLEAR SECURITY ADMINISTRATION Emergency Operations Training Academy EQUIPMENT CHECK-OUT FORM Name: Date taken:

174

Calibration of the Improved Stratospheric and Mesospheric Sounder. Part I: Introduction, Spectral, and Radiometric Calibration  

Science Conference Proceedings (OSTI)

The Improved Stratospheric and Mesospheric Sounder (ISAMS) is an infrared spectroradiometer that formed part of the science instrument payload of the Upper Atmosphere Research Satellite. An essential part of the success of ISAMS in orbit was a ...

J. Ballard; C. W. P. Palmer; P. E. Morris; T. J. Nightingale; J. Firth; R. J. Knight; P. Venters; R. J. Wells; J. G. Whitney

1996-08-01T23:59:59.000Z

175

NIST Atomic Form Factors: Form factors and standard ...  

Science Conference Proceedings (OSTI)

... 2. Form Factors and Standard Definitions. ... with ? in, eg, ngstroms; the "anomalous" scattering factor f? (depending on x-ray energy E and the ...

176

Cryogenic Treatment of Metal Parts  

SciTech Connect

Cryogenic treatment and its variables have been described. Results of eight engineering tests carried out on cryotreated parts have been presented. Cryogenic treatment of metal parts enhances useful properties which in turn, improves various strengths. Our tests viz. Abrasion, Torsion, Fatigue, Tensile, Shear, Hardness and Impact on Mild steel, Cast Iron, Brass and Copper show that the cryogenic treatment improved useful properties of mild steel parts appreciably but did not show promise with brass and copper parts.

Chillar, Rahul [S. P. College of Engineering, Andheri (W), Mumbai - 400 058 (India); Agrawal, S. C. [Tata Institute of Fundamental Research, Colaba, Mumbai - 400 005 (India)

2006-03-31T23:59:59.000Z

177

form  

Science Conference Proceedings (OSTI)

184 THORN HILL ROAD. WARRENDALE, PA 15086-7514. USA. Promoting the global science and engineering Professions concerned with minerals, metals...

178

Seal for fluid forming tools  

SciTech Connect

An electro-hydraulic forming tool for forming a sheet metal blank in a one-sided die has first and second rigid rings that engage opposite sides of a sheet metal blank. The rigid rings are contained within slots on a die portion and a hydraulic force applicator portion of the forming tool. The seals are either resiliently biased by an elastomeric member or inherently resiliently biased into contact with the blank.

Golovashchenko, Sergey Fedorovich (Beverly Hills, MI); Bonnen, John Joseph Francis (Milford, MI)

2012-03-20T23:59:59.000Z

179

Employee In-Processing Forms  

Energy.gov (U.S. Department of Energy (DOE))

Editable PDF in-processing forms which can be filled out by new employees prior to their first day of work

180

Price/Cost Proposal Form  

NLE Websites -- All DOE Office Websites (Extended Search)

PRICECOST PROPOSAL FORM Page No. of NREL Solicitation Document Number: Offeror's Name and Address: Title of Proposed Effort and Task No., Phase No., or Project Total, As...

Note: This page contains sample records for the topic "form parts iv-vii" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Homeowner Soil Sample Information Form  

E-Print Network (OSTI)

Homeowners should submit this form with their soil samples when requesting a soil test from the Texas A&M Soil Testing Laboratory.

Provin, Tony

2007-04-11T23:59:59.000Z

182

Document Control Template-Form  

NLE Websites -- All DOE Office Websites (Extended Search)

3 Media Requests 080904 EOTA - Business Form Document Title: ITTP-018, Media Inventory Control Document Number: Media Requests ITT, ADM Ben Aragon NA Referenced Documents: Parent...

183

System for forming janus particles  

DOE Patents (OSTI)

The invention is a method of forming Janus particles, that includes forming an emulsion that contains initial particles, a first liquid, and a second liquid; solidifying the first liquid to form a solid that contains at least a portion of the initial particles on a surface of the solid; and treating the exposed particle sides with a first surface modifying agent, to form the Janus particles. Each of the initial particles on the surface has an exposed particle side and a blocked particle side.

Hong, Liang (Midland, MI); Jiang, Shan (Champaign, IL); Granick, Steve (Champaign, IL)

2011-01-25T23:59:59.000Z

184

PART 1. RESPONDENT IDENTIFICATION DATA PART 2. SUBMISSION ...  

U.S. Energy Information Administration (EIA)

Natural Gas Plant Liquids (NGPL) and Liquefied Refinery Gases (LRG)*: PART 4. TOTAL U.S. CRUDE OIL IMPORTS BY COUNTRY OF ORIGIN (Thousand Barrels) ...

185

Method of forming ceramic bricks  

SciTech Connect

A method for forming free standing ceramic bricks for use as tritium breeder material is disclosed. Aqueous solutions of sodium carbonate and potassium carbonate are mixed with an organic hydrocolloid dispersion and powdered lithium carbonate, spray dried, and ceramic bricks formed by molding in a die and firing.

Poeppel, Roger B. (Glen Ellyn, IL); Claar, Terry D. (Newark, DE); Silkowski, Peter (Urbana, IL)

1988-01-01T23:59:59.000Z

186

Comments on Form Factor Bounds  

E-Print Network (OSTI)

Improved model independent upper bounds on the weak transition form factors are derived using inclusive sum rules. Comparison of the new bounds with the old ones is made for the form factors h_{A_1} and h_V in B -> D* decays.

Chiang, C W

2000-01-01T23:59:59.000Z

187

Remarks on Form Factor Bounds  

E-Print Network (OSTI)

Improved model independent upper bounds on the weak transition form factors are derived using inclusive sum rules. Comparison of the new bounds with the old ones is made for the form factors h_{A_1} and h_V in B -> D* decays.

Cheng-Wei Chiang

1999-09-07T23:59:59.000Z

188

Method of forming ceramic bricks  

DOE Patents (OSTI)

A method for forming free standing ceramic bricks for use as tritium breeder material is disclosed. Aqueous solutions of sodium carbonate and potassium carbonate are mixed with an organic hydrocolloid dispersion and powdered lithium carbonate, spray dried, and ceramic bricks formed by molding in a die and firing.

Poeppel, R.B.; Claar, T.D.; Silkowski, P.

1987-04-22T23:59:59.000Z

189

Programmed design of ship forms  

Science Conference Proceedings (OSTI)

This paper describes a new category of CAD applications devoted to the definition and parameterization of hull forms, called programmed design. Programmed design relies on two prerequisites. The first one is a product model with a variety of types large ... Keywords: CAD language, Hull form, Parametric design, Product model, Programmed design

A. Rodrguez; L. Fernndez-Jambrina

2012-07-01T23:59:59.000Z

190

Electromagnetic form factors of hadrons  

SciTech Connect

A vector meson dominance model of the electromagnetic form factors of hadrons is developed which is based on the use of unstable particle propagators. Least-square fits are made to the proton, neutron, pion and kaon form factor data in both the space and time-like regions. A good fit to the low-energy nucleon form factor data is obtained using only rho, $omega$, and phi dominance, and leads to a determination of the vector meson resonance parameters in good agreement with experiment. The nucleon-vector meson coupling constants obey simple sum rules indicating that there exists no hard core contribution to the form factors within theoretical uncertainties. The prediction for the electromagnetic radii of the proton is in reasonable agreement with recent experiments. The pion and kaon charge form factors as deduced from the nucleon form factors assuming vector meson universality are compared to the data. The pion form factor agrees with the data in both the space and time-like regions. The pion charge radius is in agreement with the recent Dubna result, but the isovector P-wave pion-pion phase shift calculated from the theory disagrees with experiment. A possible contribution to the form factors from a heavy rho meson is also evaluated. (auth)

Zidell, V.S.

1976-01-01T23:59:59.000Z

191

Waste Pickup Form User's Guide  

E-Print Network (OSTI)

Waste Pickup Form User's Guide Updated: 3/13/12 #12;Introduction: Welcome to the Cal State University Fullerton Online Waste Pickup Form User's Guide. In this guide you will learn what you can use phosphorus-32) 3. To request a pickup of universal waste including light bulbs, aerosol cans, batteries

de Lijser, Peter

192

Copyright 2009 No part of this presentation may be reproduced in any form without prior authorization.  

E-Print Network (OSTI)

PV ideal for rural applications both in MN and elsewhere Orb Energy Working to make solar power Ethanol centric Limited solar opportunities Lack of cultural awareness Opportunities Increase public without prior authorization. Minnesota Energy Sources · Limited solar · Good location for wind, hydro

Amin, S. Massoud

193

Copyright 2009 No part of this presentation may be reproduced in any form without prior authorization.  

E-Print Network (OSTI)

and Programs I developed and/or led at EPRI Enterprise Information Security (EIS) Infrastructure Security. Information Networks for On-Line Trade, Security and Control EIS focusEIS focus TTC OASIS ISN WAMS CC-RTU DSA very quickly even at 23% growth rate per year. · Advanced Nuclear and renewable resources: ­ Solar

Amin, S. Massoud

194

Copyright 2008 No part of this presentation may be reproduced in any form without prior authorization.  

E-Print Network (OSTI)

demon- stration project for Xcel Energy, convert- ing a Ford Escape Hybrid PHEV vehicle to put power. Utilizing fully automated fast processing, the new technology will be capable of produc- ing one solar cell

Amin, S. Massoud

195

2009 No part may be reproduced in any form without prior authorization.  

E-Print Network (OSTI)

Vehicles ­ Developing and Using Alternative Transportation Fuels · Greening the electric power supply for grants for the manufacturing of advanced batteries and components. This includes the manufacturing of advanced lithium ion batteries, hybrid electrical systems, component manufacturers, and soft-ware designers

Amin, S. Massoud

196

Form 2100 (4/12) Integrated Work Document (IWD) Part 1, Activity Specific Information  

E-Print Network (OSTI)

Contractor must comply with the liability insurance and other pre-job submittal requirements listed from clients to whom the contractor has provided similar work and products Pre-Job Submittal and Consultant's Approval The contractor's pre-job submittals must include an original copy of the certificate

197

Copyright 2008 No part of this presentation may be reproduced in any form without prior authorization.  

E-Print Network (OSTI)

Technologies Corporation (UTC) 48% AA Dairy Digester biogas system converted 130kW diesel engine $363,000 EPA

Amin, S. Massoud

198

Fire Protection Account Request Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fire Protection System Account Request Form Fire Protection System Account Request Form To obtain a user id and password to access the Fire Protection system, please complete the form, save the file and email it to hssUserSupport@hq.doe.gov or print and fax it to 301-903-9823. We will provide a username and password to new account holders. Please allow several business days to process your account request. When your request is approved, you will be contacted with your

199

HHS SMALL BUSINESS REVIEW FORM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE Form 4220.2 (Revised March 14 2013) DOE Form 4220.2 (Revised March 14 2013) Office of Small and Disadvantaged Business Utilization DOE F 4220.2 - Small Business Review Form (03/14/2013) OSDBU Control Number: _______________________________________Date Received: ______________________________ A. Project Information 1. Requisition Number: ________________________ Acquisition Instrument Proposed/Contract Type: [ ] Contract No (Mod): ______________________ [ ] Departmental IDIQ No: ___________________ [ ] GSA Schedule: _________________________ [ ] GWAC Contract: ________________________ [ ] DOE BPA:_____________________________ 2. Acquisition Office and Program Element: CO/CS Name: Contact Information (Telephone and E-mail): 3. Description of services or supplies:

200

EIA-412 Form and Instructions  

U.S. Energy Information Administration (EIA) Indexed Site

12 (2003) |ANNUAL ELECTRIC INDUSTRY FINANCIAL REPORT |Form 12 (2003) |ANNUAL ELECTRIC INDUSTRY FINANCIAL REPORT |Form Approved OMB No. 1905-0129 Approval Expires 11/30/04 | | |GENERAL INFORMATION| |PURPOSE Form EIA-412 collects accounting, plant statistics, and transmission data from various electric industry entities in the United States. The data from this report appear in the following EIA publications: Financial Statistics of Major U.S. Publicly Owned Electric Utilities and Electric Power Annual. The data collected on this form are used to monitor the current status and trends of the electric power industry and to evaluate the future of the industry.| |REQUIRED RESPONDENTS The accounting data (Schedules 1 through 8) are to be completed by each municipality, political subdivision, State, and Federal entity engaged in the generation, transmission, or distribution of

Note: This page contains sample records for the topic "form parts iv-vii" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Process for forming planarized films  

DOE Patents (OSTI)

A planarization process and apparatus which employs plasma-enhanced chemical vapor deposition (PECVD) to form plarnarization films of dielectric or conductive carbonaceous material on step-like substrates.

Pang, Stella W. (Arlington, MA); Horn, Mark W. (North Chelmsford, MA)

1991-01-01T23:59:59.000Z

202

Medical Treatment Authorization Form _____________________________________________________________________ DOB___/____/____  

E-Print Network (OSTI)

Medical Treatment Authorization Form if they are in excess of other valid and collectible insurance. 1. List any medical conditions that camp personnel): _____________________________________________________________________________________ _____________________________________________________________________________________ 2. List any medications currently taking

203

Materials Week '97: Registration Form  

Science Conference Proceedings (OSTI)

Failure Analysis/Characterization and Testing Conferences (MC) ... (NOTES: This offer is available to full conference registrants only; also, you must print this form and mail or fax it with your signature in order to qualify ... Country of Citizenship.

204

Instructions for Form EIA-1605  

U.S. Energy Information Administration (EIA)

U.S. Department of Energy U.S. Energy Information Administration ... Section 1605(b) of the Energy Policy Act (EPAct) of 1992 (42 USC 13385). The form implements the

205

Triggered pore-forming agents  

DOE Patents (OSTI)

An inactive pore-forming agent which is activated to lytic function by a condition such as pH, light, heat, reducing potential, or metal ion concentration, or substance such as a protease, at the surface of a cell.

Bayley, Hagan (Grafton, MA); Walker, Barbara J. (Auburn, MA); Chang, Chung-yu (Worcester, MA); Niblack, Brett (Nashville, TN); Panchal, Rekha (Shrewsbury, MA)

1998-01-01T23:59:59.000Z

206

Residential California adobe : mud form  

E-Print Network (OSTI)

Northern California has a rich tradition of adobe architecture . Formed with earth, defined by site, climate and use, the adobe structures exemplify a building methodology in harmony with nature and the lifestyle of it's ...

Daymond, Diana Leigh

1985-01-01T23:59:59.000Z

207

Automated Part Tracking and Metrology Applied to a Manufacturing Process  

E-Print Network (OSTI)

This paper presents a case study in the design of an automated part tracking and metrology systems for an industrial manufacturing system. A major productivity challenge of this facility is managing each batch of parts as it is formed, treated, and processed. Currently this is handled with paper forms that are transferred manually with each batch, resulting in scheduling problems, lost parts, and a general lack of ability to track orders through the production process. Problems in quality control also lead to significant waste. Required part measurements are taken and recorded manually, and are not considered reliable by plant management. The prototype design is an automated part tracking and quality control system to enhance productivity. The system uses RFID technology to identify parts and associate them with a particular order, giving management real-time information on the location of any product batch in the plant. In addition, part measurement quality control is enhanced with digitized calipers and scales, thus increases reliability of part measurement accuracy through human error reduction.

Morelli, F.; Halbert, T.; Hignight, M.; Kell, Z.; Lacy, J.; Rasmussen, B. P.

2013-01-01T23:59:59.000Z

208

2014 Teacher Workshop Registration Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Teacher Workshop Registration Form Teacher Workshop Registration Form Workshop name and dates: (Please check those you want to attend; fees do not include Aurora University graduate credit.) Insects at Work in Our World: $110 June 19-20 Beauty and Charm at Fermilab: $275 July 14-18 Particles and Prairies: $275 July 21-25 Phriendly Physics: $275 July 28-August 1 The Prairie - Our Heartland: $175

209

Method for forming metal contacts  

DOE Patents (OSTI)

Methods of forming metal contacts with metal inks in the manufacture of photovoltaic devices are disclosed. The metal inks are selectively deposited on semiconductor coatings by inkjet and aerosol apparatus. The composite is heated to selective temperatures where the metal inks burn through the coating to form an electrical contact with the semiconductor. Metal layers are then deposited on the electrical contacts by light induced or light assisted plating.

Reddington, Erik; Sutter, Thomas C; Bu, Lujia; Cannon, Alexandra; Habas, Susan E; Curtis, Calvin J; Miedaner, Alexander; Ginley, David S; Van Hest, Marinus Franciscus Antonius Maria

2013-09-17T23:59:59.000Z

210

Methods of forming hardened surfaces  

DOE Patents (OSTI)

The invention encompasses a method of forming a metallic coating. A metallic glass coating is formed over a metallic substrate. After formation of the coating, at least a portion of the metallic glass can be converted into a crystalline material having a nanocrystalline grain size. The invention also encompasses metallic coatings comprising metallic glass. Additionally, the invention encompasses metallic coatings comprising crystalline metallic material, with at least some of the crystalline metallic material having a nanocrystalline grain size.

Branagan, Daniel J. (Iona, ID)

2004-07-27T23:59:59.000Z

211

INEL spray-forming research  

SciTech Connect

Spray forming is a near-net-shape fabrication technology in which a spray of finely atomized liquid droplets is deposited onto a suitably shaped substrate or mold to produce a coherent solid. The technology offers unique opportunities for simplifying materials processing without sacrificing, and oftentimes substantially improving, product quality. Spray forming can be performed with a wide range of metals and nonmetals, and offers property improvements resulting from rapid solidification (e.g. refined microstructures, extended solid solubilities and reduced segregation). Economic benefits result from process simplification and the elimination of unit operations. Researchers at the Idaho National Engineering Laboratory (INEL) are developing spray-forming technology for producing near-net-shape solids and coatings of a variety of metals, polymers, and composite materials. Results from several spray-forming programs are presented to illustrate the range of capabilities of the technique as well as the accompanying technical and economic benefits. Low-carbon steel strip >0.75 mm thick and polymer membranes for gas/gas and liquid/liquid separations that were spray formed are discussed; recent advances in spray forming molds, dies, and other tooling using low-melting-point metals are described.

McHugh, K.M.; Key, J.F.

1992-01-01T23:59:59.000Z

212

INEL spray-forming research  

SciTech Connect

Spray forming is a near-net-shape fabrication technology in which a spray of finely atomized liquid droplets is deposited onto a suitably shaped substrate or mold to produce a coherent solid. The technology offers unique opportunities for simplifying materials processing without sacrificing, and oftentimes substantially improving, product quality. Spray forming can be performed with a wide range of metals and nonmetals, and offers property improvements resulting from rapid solidification (e.g. refined microstructures, extended solid solubilities and reduced segregation). Economic benefits result from process simplification and the elimination of unit operations. Researchers at the Idaho National Engineering Laboratory (INEL) are developing spray-forming technology for producing near-net-shape solids and coatings of a variety of metals, polymers, and composite materials. Results from several spray-forming programs are presented to illustrate the range of capabilities of the technique as well as the accompanying technical and economic benefits. Low-carbon steel strip >0.75 mm thick and polymer membranes for gas/gas and liquid/liquid separations that were spray formed are discussed; recent advances in spray forming molds, dies, and other tooling using low-melting-point metals are described.

McHugh, K.M.; Key, J.F.

1992-12-31T23:59:59.000Z

213

Method and tool for contracting tubular members by electro-hydraulic forming before hydroforming  

SciTech Connect

A tubular preform is contracted in an electro-hydraulic forming operation. The tubular preform is wrapped with one or more coils of wire and placed in a chamber of an electro-hydraulic forming tool. The electro-hydraulic forming tool is discharged to form a compressed area on a portion of the tube. The tube is then placed in a hydroforming tool that expands the tubular preform to form a part.

Golovashchenko, Sergey Fedorovich (Beverly Hills, MI)

2011-03-15T23:59:59.000Z

214

National Nuclear Security Administration Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Form Categorical Exclusion Determination Form NEPA ID#: Proposed Action Title: Program or Field Office: Location(s) (City/County/State): Proposed Action Description: Categorical Exclusion(s) Applied: For the complete DOE National Environmental Policy Act regulations regarding categorical exclusions, including the full text of each categorical exclusion, see Subpart D of 10 CFR Part 1021. Regulatory Requirements in 10 CFR 1021.410(b): (See full text in regulation) The proposal fits within a class of actions that is listed in Appendix A or B to 10 CFR Part 1021, Subpart D. To fit within the classes of actions listed in 10 CFR Part 1021, Subpart D, Appendix B, a proposal must be one that would not: (1) threaten

215

Procurement-Related Forms | Y-12 National Security Complex  

NLE Websites -- All DOE Office Websites (Extended Search)

Procurement-Related Forms Procurement-Related Forms Procurement-Related Forms The following procurement-related forms are provided in PDF fillable and/or Word format. Click the link in the "Format" column to open a copy of the form or right-click to download. To sort the table by UCN number or title, click the associated column heading. Number* Title/Description Format** UCN-04452S B&W Y-12 Subcontractor Personnel Exit Checklist PDF-fil UCN-6573 Subcontractor's Invoice for Travel and/or Services PDF-fil UCN-13816B Request for Waiver or Deviation Word UCN-13816C Request for Waiver or Deviation (Continued) Word UCN-20087A Suspect/Counterfeit Part Headmark List PDF UCN-20856 Nonpossessing Security Plan PDF-fil, Word UCN-21329 Subcontract Technical Representative (STR) Change Notice PDF-fil

216

DOE Headquarters FOIA Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Oak Ridge Office FOIA Request Form Oak Ridge Office FOIA Request Form To make an Electronic FOIA (E-FOIA) request, please provide the information below. Failure to enter accurate and complete information may render your FOIA request impossible to fulfill. * Requests submitted under the Privacy Act must be signed and, therefore, cannot be submitted on this form. Name: (Required) Organization: Address: (Required) Phone: FAX: Email: Reasonably Describe Records Describe the specific record (s) you seek with sufficient detail that a knowledgeable official of the activity may locate the record with a reasonable amount of effort. Such detail should include: dates, titles, file designations, and offices to be searched. Since most DOE records are not retained permanently, the more information that you provide, the better the opportunity there is to determine if the

217

EIA-412 Form and Instructions  

U.S. Energy Information Administration (EIA) Indexed Site

12 (2003) 12 (2003) ANNUAL ELECTRIC INDUSTRY FINANCIAL REPORT Form Approved OMB No. 1905-0129 Approval Expires 11/30/04 GENERAL INFORMATION PURPOSE Form EIA-412 collects accounting, plant statistics, and transmission data from various electric industry entities in the United States. The data from this report appear in the following EIA publications: Financial Statistics of Major U.S. Publicly Owned Electric Utilities and Electric Power Annual. The data collected on this form are used to monitor the current status and trends of the electric power industry and to evaluate the future of the industry. REQUIRED RESPONDENTS The accounting data (Schedules 1 through 8) are to be completed by each municipality, political subdivision, State, and Federal entity engaged in the generation,

218

Radiation Safety Work Control Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Radiation Safety Work Control Form Radiation Safety Work Control Form (see instructions on pg-2) Rev July-2012 Area: Form #: Date: Preliminary Applicability Screen: (a) Will closing the beam line injection stoppers mitigate the radiological hazards introduced by the proposed work? Yes No (b) Can the closed state of the beam line injection stoppers be assured during the proposed work (ie., work does NOT involve injection stoppers or associated HPS)? Yes No If the answers to both questions are yes, the work can be performed safely under an SSRL RSWCF. If the answer to either question is no, then the work must be performed under a SPEAR3 RSWCF. Section 1: Description of work to be done, including date and time. (Person Responsible completes section)

219

LFS Subcontract Form of Agreement  

NLE Websites -- All DOE Office Websites (Extended Search)

SFA (Rev. 5, 4/5/13) Subcontract Form of Agreement SFA (Rev. 5, 4/5/13) Subcontract Form of Agreement Dated 5-20-13 Subcontract No. 241314 Page 1 of 2 Subcontract Form of Agreement Subcontractor: TBD Subcontract No.: 241314 Address: * Contact: * Telephone: * Facsimile: * E-mail: * D-U-N-S No.: * NAICS Code: 334111 This subcontract, effective on the date of signature by the last party to sign, is hereby made and entered into by and between Los Alamos National Security, LLC (CONTRACTOR), and the above named SUBCONTRACTOR who hereby agree that all Work specified below, which is a portion of the goods and services to be provided by CONTRACTOR for the United States Department of Energy National Nuclear Security Administration (OWNER), shall be performed by the SUBCONTRACTOR in accordance with all

220

Microsoft Word - FORM46002.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

MANAGEMENT REPORTING MANAGEMENT REPORTING Progress Report Special Status Report SCIENTIFIC/TECHNICAL REPORTING (Reports/Products must be submitted with appropriate DOE F 241. The 241 forms are available at www.osti.gov/elink.) Report/Product Form Final Scientific/Technical Report DOE F 241.3 Conference papers/proceedings* DOE F 241.3 Software/Manual DOE F 241.4 Other (see special instructions) DOE F 241.3 * Scientific and technical conferences only FINANCIAL REPORTING SF-269, Financial Status Report SF-269A, Financial Status Report (Short Form) SF-272, Federal Cash Transactions Report CLOSEOUT REPORTING Patent Certification Property Certification Other (see Special Instructions) OTHER REPORTING Other (see Special Instructions)

Note: This page contains sample records for the topic "form parts iv-vii" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Substrate system for spray forming  

SciTech Connect

A substrate system for receiving a deposit of sprayed metal droplets including a movable outer substrate on which the sprayed metal droplets are deposited. The substrate system also includes an inner substrate disposed adjacent the outer substrate where the sprayed metal droplets are deposited on the outer substrate. The inner substrate includes zones of differing thermal conductivity to resist substrate layer porosity and to resist formation of large grains and coarse constituent particles in a bulk layer of the metal droplets which have accumulated on the outer substrate. A spray forming apparatus and associated method of spray forming a molten metal to form a metal product using the substrate system of the invention is also provided.

Chu, Men G. (Export, PA); Chernicoff, William P. (Harrisburg, PA)

2000-01-01T23:59:59.000Z

222

Substrate system for spray forming  

DOE Patents (OSTI)

A substrate system for receiving a deposit of sprayed metal droplets including a movable outer substrate on which the sprayed metal droplets are deposited. The substrate system also includes an inner substrate disposed adjacent the outer substrate where the sprayed metal droplets are deposited on the outer substrate. The inner substrate includes zones of differing thermal conductivity to resist substrate layer porosity and to resist formation of large grains and coarse constituent particles in a bulk layer of the metal droplets which have accumulated on the outer substrate. A spray forming apparatus and associated method of spray forming a molten metal to form a metal product using the substrate system of the invention is also provided.

Chu, Men G. (Export, PA); Chernicoff, William P. (Harrisburg, PA)

2002-01-01T23:59:59.000Z

223

PROCESS OF FORMING POWDERED MATERIAL  

DOE Patents (OSTI)

A process of forming high-density compacts of a powdered ceramic material is described by agglomerating the powdered ceramic material with a heat- decompossble binder, adding a heat-decompossble lubricant to the agglomerated material, placing a quantity of the material into a die cavity, pressing the material to form a compact, pretreating the compacts in a nonoxidizing atmosphere to remove the binder and lubricant, and sintering the compacts. When this process is used for making nuclear reactor fuel elements, the ceramic material is an oxide powder of a fissionsble material and after forming, the compacts are placed in a cladding tube which is closed at its ends by vapor tight end caps, so that the sintered compacts are held in close contact with each other and with the interior wall of the cladding tube.

Glatter, J.; Schaner, B.E.

1961-07-14T23:59:59.000Z

224

Method of forming structural heliostat  

DOE Patents (OSTI)

In forming a heliostat having a main support structure and pivoting and tilting motors and gears and a mirror module for reflecting solar energy onto a collector, the improvement characterized by a method of forming the mirror module in which the mirror is laid upon a solid rigid supporting bed in one or more sections, with or without focusing; a mirror backing sheet is applied by first applying respective thin layers of silicone grease and, thereafter, progressively rolling application to eliminate air bubbles; followed by affixing of a substrate assembly to the mirror backing sheet to form a mirror module that does not curve because of thermally induced stresses and differential thermal expansion or contraction effects. The silicone grease also serves to dampen fluttering of the mirror and protect the mirror backside against adverse effects of the weather. Also disclosed are specific details of preferred embodiments.

Anderson, Alfred J. (Littleton, CO)

1984-06-26T23:59:59.000Z

225

QTR Ex Parte Communications | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Ex Parte Communications QTR Ex Parte Communications Ex parte communications received during the Department of Energy Quadrennial Technology Review. qtrexpartecommunications0.pd...

226

Ex parte Communication | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Communication Ex parte Communication Ex parte communication on AHAM's development of an ice maker energy test procedure Ex parte Communication More Documents & Publications...

227

Paperclips Etc. Special Order Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PSS-02.2 (March 7, 2011) Replaces PSS-02.1 PSS-02.2 (March 7, 2011) Replaces PSS-02.1 PAPERCLIPS Etc. SPECIAL Orders Form This form is used to order supplies that are not readily available in the DOE HQ self-service supply stores or for items that require approval by Office Management. All supplies ordered MUST be used for Official Government Business only. Requestor's Name: ___________________________________________________ Date: __________________ Phone Number: __________________ DOE ID Badge No.: ________________________________________ Catalog Name: ______________________________________________________ Org Code: ______________ Item Number Page # Item Description Quantity Store Use Only ALL printed names (legible), signatures and dates are required before your Special order is processed.

228

The University of Texas at Austin Jan-11 PART I CRIMES Reported Unfounded Actual Cleared % Clrd.  

E-Print Network (OSTI)

The University of Texas at Austin Jan-11 PART I CRIMES Reported Unfounded Actual Cleared % Clrd. 1.7% DP Form #31 - Page 1(Rev. 1/93) #12;The University of Texas at Austin Jan-11 PART I CRIMES BURGLARY/93) #12;The University of Texas at Austin Jan-11 PART I CRIMES BURGLARY & THEFT TARGET SECTION (List Other

Johns, Russell Taylor

229

The University of Texas at Austin Jan-00 PART I CRIMES Reported Unfounded Actual Cleared % Clrd.  

E-Print Network (OSTI)

The University of Texas at Austin Jan-00 PART I CRIMES Reported Unfounded Actual Cleared % Clrd. 1.3% DP Form #31 - Page 1(Rev. 1/93) #12;The University of Texas at Austin Jan-00 PART I CRIMES BURGLARY of Texas at Austin Jan-00 PART I CRIMES BURGLARY & THEFT TARGET SECTION (List Other Target Areas) #/Month

Johns, Russell Taylor

230

The University of Texas at Austin Jan-06 PART I CRIMES Reported Unfounded Actual Cleared % Clrd.  

E-Print Network (OSTI)

The University of Texas at Austin Jan-06 PART I CRIMES Reported Unfounded Actual Cleared % Clrd. 1 Total % Rcvd. 1.0% DP Form #31 - Page 1(Rev. 1/93) #12;The University of Texas at Austin Jan-06 PART I/93) #12;The University of Texas at Austin Jan-06 PART I CRIMES BURGLARY & THEFT TARGET SECTION (List Other

Johns, Russell Taylor

231

The University of Texas at Austin Jan-09 PART I CRIMES Reported Unfounded Actual Cleared % Clrd.  

E-Print Network (OSTI)

The University of Texas at Austin Jan-09 PART I CRIMES Reported Unfounded Actual Cleared % Clrd. 1. 8.0% DP Form #31 - Page 1(Rev. 1/93) #12;The University of Texas at Austin Jan-09 PART I CRIMES/93) #12;The University of Texas at Austin Jan-09 PART I CRIMES BURGLARY & THEFT TARGET SECTION (List Other

Johns, Russell Taylor

232

The University of Texas at Austin Jan-08 PART I CRIMES Reported Unfounded Actual Cleared % Clrd.  

E-Print Network (OSTI)

The University of Texas at Austin Jan-08 PART I CRIMES Reported Unfounded Actual Cleared % Clrd. 1 Total % Rcvd. 2.2% DP Form #31 - Page 1(Rev. 1/93) #12;The University of Texas at Austin Jan-08 PART I(Rev. 1/93) #12;The University of Texas at Austin Jan-08 PART I CRIMES BURGLARY & THEFT TARGET SECTION

Johns, Russell Taylor

233

The University of Texas at Austin Jan-04 PART I CRIMES Reported Unfounded Actual Cleared % Clrd.  

E-Print Network (OSTI)

The University of Texas at Austin Jan-04 PART I CRIMES Reported Unfounded Actual Cleared % Clrd. 1.1% DP Form #31 - Page 1(Rev. 1/93) #12;The University of Texas at Austin Jan-04 PART I CRIMES BURGLARY University of Texas at Austin Jan-04 PART I CRIMES BURGLARY & THEFT TARGET SECTION (List Other Target Areas

Johns, Russell Taylor

234

The University of Texas at Austin Jan-10 PART I CRIMES Reported Unfounded Actual Cleared % Clrd.  

E-Print Network (OSTI)

The University of Texas at Austin Jan-10 PART I CRIMES Reported Unfounded Actual Cleared % Clrd. 1 of Texas at Austin Jan-10 PART I CRIMES BURGLARY & THEFT TARGET SECTION Maintenance Shops Offices 6 OF REPORT DP Form #31 - Page 2(Rev. 1/93) #12;The University of Texas at Austin Jan-10 PART I CRIMES

Johns, Russell Taylor

235

Secondary Waste Form Down-Selection Data PackageFluidized Bed Steam Reforming Waste Form  

SciTech Connect

The Hanford Site in southeast Washington State has 56 million gallons of radioactive and chemically hazardous wastes stored in 177 underground tanks (ORP 2010). The U.S. Department of Energy (DOE), Office of River Protection (ORP), through its contractors, is constructing the Hanford Tank Waste Treatment and Immobilization Plant (WTP) to convert the radioactive and hazardous wastes into stable glass waste forms for disposal. Within the WTP, the pretreatment facility will receive the retrieved waste from the tank farms and separate it into two treated process streams. These waste streams will be vitrified, and the resulting waste canisters will be sent to offsite (high-level waste [HLW]) and onsite (immobilized low-activity waste [ILAW]) repositories. As part of the pretreatment and ILAW processing, liquid secondary wastes will be generated that will be transferred to the Effluent Treatment Facility (ETF) on the Hanford Site for further treatment. These liquid secondary wastes will be converted to stable solid waste forms that will be disposed of in the Integrated Disposal Facility (IDF). To support the selection of a waste form for the liquid secondary wastes from WTP, Washington River Protection Solutions (WRPS) has initiated secondary waste form testing work at Pacific Northwest National Laboratory (PNNL). In anticipation of a down-selection process for a waste form for the Solidification Treatment Unit to be added to the ETF, PNNL is developing data packages to support that down-selection. The objective of the data packages is to identify, evaluate, and summarize the existing information on the four waste forms being considered for stabilizing and solidifying the liquid secondary wastes. At the Hanford Site, the FBSR process is being evaluated as a supplemental technology for treating and immobilizing Hanford LAW radioactive tank waste and for treating secondary wastes from the WTP pretreatment and LAW vitrification processes.

Qafoku, Nikolla; Westsik, Joseph H.; Strachan, Denis M.; Valenta, Michelle M.; Pires, Richard P.

2011-09-12T23:59:59.000Z

236

ORPS User Registration Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ORPS User Registration Form ORPS User Registration Form August 09, 2007 Operational Event Information Systems Registration Form For Occurrence Reporting and Processing System ORPS...

237

Opinion of Counsel Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Opinion of Counsel Form Opinion of Counsel Form For use with natural gas authorization filings Opinion of Counsel Form - Natural Gas Regulation...

238

Sources: Energy Information Administration, Form EIA-182,  

Annual Energy Outlook 2012 (EIA)

Form EIA-182, "Domestic Crude Oil First Purchase Report"; Form EIA-856, "Monthly Foreign Crude Oil Acquisition Report"; and Form EIA-14, "Refiners' Monthly Cost Report." 0...

239

RRC Form H-11 | Open Energy Information  

Open Energy Info (EERE)

Page Edit with form History Facebook icon Twitter icon RRC Form H-11 Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Reference Material: RRC Form H-11 Details...

240

Technology Transfer Reporting Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technology Transfer Reporting Form Technology Transfer Reporting Form Technology Transfer Reporting Form More Documents & Publications DOE F 3230.6A Technology Partnership...

Note: This page contains sample records for the topic "form parts iv-vii" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

TEPP - Exercise Evaluation Forms | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Forms Hazardous Materials Exercise Evaluation Forms Exercise Evaluation Forms More Documents & Publications TEPP - Spent Nuclear Fuel Radiography Device Soil DensityMoisture Gauge...

242

WELLNESS LIFESTYLE AGREEMENT COMMITMENT FORM  

E-Print Network (OSTI)

WELLNESS LIFESTYLE AGREEMENT COMMITMENT FORM The Wellness Lifestyle Program is located in Reynolds will actively participate in the wellness program to make Reynolds Hall a healthy and supportive place or more consequences: conduct referral; administrative removal from the Wellness Program and

Weston, Ken

243

Spin-forming Project Report  

Science Conference Proceedings (OSTI)

In a second development order, spin-forming equipment was again evaluated using the test shape, a hemispherical shell. In this second development order, pure vanadium and alloy titanium (Ti-6Al-4V) were spin-formed, as well as additional copper and 21-6-9 stainless. In the first development order the following materials had been spin-formed: copper (alloy C11000 ETP), 6061 aluminum, 304L stainless steel, 21-6-9 stainless steel, and tantalum-2.5% tungsten. Significant challenges included properly adjusting the rotations-per-minute (RPM), cracking at un-beveled edges and laser marks, redressing of notches, surface cracking, non-uniform temperature evolution in the titanium, and cracking of the tailstock. Lessons learned were that 300 RPM worked better than 600 RPM for most materials (at the feed rate of 800 mm/min); beveling the edges to lower the stress reduces edge cracking; notches, laser marks, or edge defects in the preform doom the process to cracking and failure; coolant is required for vanadium spin-forming; increasing the number of passes to nine or more eliminates surface cracking for vanadium; titanium develops a hot zone in front of the rollers; and the tailstock should be redesigned to eliminate the cylindrical stress concentrator in the center.

Switzner, Nathan; Henry, Dick

2009-03-20T23:59:59.000Z

244

A simple proof of Jordan normal form  

E-Print Network (OSTI)

In this note, a simple proof Jordan normal form and rational form of matrices over a field is given.

Chen, Yuqun

2011-01-01T23:59:59.000Z

245

CONTACTS FOR INFORMATION MANAGEMENT: Forms, Information Collection...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CONTACTS FOR INFORMATION MANAGEMENT: Forms, Information Collection (PRA), & Records CONTACTS FOR INFORMATION MANAGEMENT: Forms, Information Collection (PRA), & Records Name Contact...

246

Method of forming clathrate ice  

DOE Patents (OSTI)

A method of forming clathrate ice in a supercooled water-based liquid contained in a vessel is disclosed. Initially, an oscillator device is located in the liquid in the vessel. The oscillator device is then oscillated ultrasonically so that small crystals are formed in the liquid. These small crystals serve as seed crystals for ice formation in the liquid and thereby prevent supercooling of the liquid. Preferably, the oscillating device is controlled by a thermostat which initiates operation of the oscillator device when the temperature of the liquid is lowered to the freezing point. Thereafter, the operation of the oscillator device is terminated when ice is sensed in the liquid by an ice sensor.

Hino, Toshiyuki (Tokyo, JP); Gorski, Anthony J. (Lemont, IL)

1987-01-01T23:59:59.000Z

247

Method of forming calthrate ice  

DOE Patents (OSTI)

A method of forming clathrate ice in a supercooled water-based liquid contained in a vessel is disclosed. Initially, an oscillator device is located in the liquid in the vessel. The oscillator device is then oscillated ultransonically so that small crystals are formed in the liquid. Thes small crystals serve as seed crystals for ice formation in the liquid and thereby prevent supercooling of the liquid. Preferably, the oscillating device is controlled by a thermostat which initiates operation of the oscillator device when the temperature of the liquid is lowered to the freezing point. Thereafter, the operation of the oscillator device is terminated when ice is sensed in the liquid by an ice sensor.

Hino, T.; Gorski, A.J.

1985-09-30T23:59:59.000Z

248

EEO PRECOMPLAINT COUNSELING INTAKE FORM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NATIONAL ORIGIN (SPECIFY) NATIONAL ORIGIN (SPECIFY) SEX ( ) FEMALE ( ) MALE DISABILITY ( ) MENTAL ( ) PHYSICAL AGE (SPECIFY DATE OF BIRTH) REPRISAL (List prior EEO activity, case number if known, and date of activity) GENETIC INFORMATION PREGNANCY SEXUAL ORIENTATION STATUS AS A PARENT - 2 - ISSUE(S) IN THE COMPLAINT (CHECK APPROPRIATE BOX/BOXES) NONSELECTION AWARDS RETIREMENT DETAIL TIME AND ATTENDANCE SUSPENSION REASSIGNMENT SEPARATION/TERMINATION DUTY HOURS REPRIMAND PERFORMANCE APPRAISAL SEXUAL HARASSMENT ASSIGNMENT OF DUTIES WORK CONDITIONS OTHER (SPECIFY) PART 3. EVENT INFORMATION: PROVIDE A BRIEF DESCRIPTION OF EACH ALLEGED DISCRIMINATORY INCIDENT, INCLUDING THE SPECIFIC DATE OF THE INCIDENT,

249

EEO PRECOMPLAINT COUNSELING INTAKE FORM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NATIONAL ORIGIN (SPECIFY) SEX ( ) FEMALE ( ) MALE DISABILITY ( ) MENTAL ( ) PHYSICAL AGE (SPECIFY DATE OF BIRTH) REPRISAL (List prior EEO activity, case number if known, and date of activity) GENETIC INFORMATION PREGNANCY SEXUAL ORIENTATION STATUS AS A PARENT - 2 - ISSUE(S) IN THE COMPLAINT (CHECK APPROPRIATE BOX/BOXES) NONSELECTION AWARDS RETIREMENT DETAIL TIME AND ATTENDANCE SUSPENSION REASSIGNMENT SEPARATION/TERMINATION DUTY HOURS REPRIMAND PERFORMANCE APPRAISAL SEXUAL HARASSMENT ASSIGNMENT OF DUTIES WORK CONDITIONS OTHER (SPECIFY) PART 3. EVENT INFORMATION: PROVIDE A BRIEF DESCRIPTION OF EACH ALLEGED DISCRIMINATORY INCIDENT, INCLUDING THE SPECIFIC DATE OF THE INCIDENT,

250

DOE Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

U.S. Department of Energy Categorical Exclusion Determination Form Program or Field Office: TRIBAL ENERGY PROGRAM Project Title SD-TEP-ROSEBUD SIOUX TRIBE Location: Tribal ROSEBUD SIOUX TRIBE SD American Recovery and Reinvestment Act: Proposed Action or Project Description The Rosebud Sioux Tribe (RST) and Citizens Wind propose to complete the required pre-construction activities necessary to secure funding for the proposed 190 MW North Antelope Highlands wind farm,

251

DOE Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

U.S. Department of Energy Categorical Exclusion Determination Form Program or Field Office: TRIBAL ENERGY PROGRAM NV Project Title NV-TEP-FALLON PAIUTE-SHOSHONE Location: Tribal FALLON PAIUTE-SHOSHONE American Recovery and Reinvestment Act: Proposed Action or Project Description The Fallon Paiute-Shoshone Tribe proposes to develop a sustainable energy park utilizing renewable energy resources at the Tribe's Reservation in Churchill County, Nevada. This proposed energy park

252

DOE Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

U.S. Department of Energy Categorical Exclusion Determination Form Program or Field Office: Energy Efficiency and Conservation Block Grant Program Project Title CA-TRIBE-LOS COYOTES BAND OF CAHUILLA AND CUPENO INDIANS Location: Tribe CA-TRIBE-LOS COYOTES BAND OF CAHUILLA AND CUPENO INDIANS CA American Recovery and Reinvestment Act: Proposed Action or Project Description The Los Coyotes Band of Cahuilla and Cupeno Indians of California proposes to replace tribal members'

253

DOE Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

U.S. Department of Energy Categorical Exclusion Determination Form Program or Field Office: TRIBAL ENERGY PROGRAM OK Project Title OK-TEP-CHEROKEE NATION BUSINESSES Location: Tribal CHEROKEE NATION BUSINESSES American Recovery and Reinvestment Act: Proposed Action or Project Description The Cherokee Wind Energy Development proposed project is for development, design, and installation of a 127.5 megawatt wind farm to offset Tribal electrical load; sell excess electricity to local, regional, and

254

Microsoft Word - PART 970.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PART 970 PART 970 - DOE MANAGEMENT AND OPERATING CONTRACTS Subpart 970.01 - Management and Operating Contract Regulatory System Sec. 970.0100 Scope of part. 970.0103 Publication and codification. Subpart 970.03 - Improper Business Practices and Personal Conflicts of Interest 970.0309 Whistleblower protection of contractor employees. 970.0309-1 Applicability. 970.0370 Management controls and improvements. 970.0370-1 Policy. 970.0370-2 Contract clause. 970.0371 Conduct of employees of DOE management and operating contractors. 970.0371-1 Scope of section. 970.0371-2 Applicability. 970.0371-3 Definition. 970.0371-4 Gratuities. 970.0371-5 Use of privileged information. 970.0371-6 Incompatibility between regular duties and private interests. 970.0371-7 Outside employment of contractor employees.

255

Employee In-Processing Forms | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

New Employee Orientation » Employee In-Processing New Employee Orientation » Employee In-Processing Forms Employee In-Processing Forms The employment forms found in this section collect important and necessary information about you that will be used to verify your identity and eligibility for Federal Employment, capture all creditable Federal Service Time, establish direct deposit for salary payment, and enumerate exemptions for Federal and state Income Tax. SF-144 - Statement of Prior Federal Service - The information collected in this form is used to document all creditable time spent in Federal Service Employment (including Military, Part-time, and Seasonal). DOE F 1600.7 - Applicant Disability/Race/National Origin and Sex Identification - Identifies race and national origin for statistical purposes only; not filed in the Official Personnel Folder.

256

Microsoft Word - ORPS Facility Registration Form 20070109.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ORPS FACILITY REGISTRATION FORM ORPS FACILITY REGISTRATION FORM Submit completed form to: U.S. Department of Energy HSS InfoCenter, HS-1.22, 270CC 1000 Independence Ave., SW Washington, DC 20585-0270 FAX: 301-903-9823 PHONE: 800-473-4375 Note: * Only one facility per form * Type or print all entries 1. TYPE OF CHANGE Add a Facility (Complete Section 1.A, then go to Section 2) Change a Facility (Complete Section 1.B, then go to Section) Delete a Facility (Complete Section 1.C, then go to Section 2) A. Add a New Facility Use this section if you are adding a facility that has never submitted ORPS reports. If the new facility includes any part of a previously existing facility, a re-mapping plan of previously submitted ORPS Reports must be provided. DATA DESCRIPTION DATA LENGTH DATA INPUT

257

Preliminary waste form characteristics report Version 1.0. Revision 1  

SciTech Connect

This report focuses on radioactive waste form characteristics that will be used to design a waste package and an engineered barrier system (EBS) for a suitable repository as part of the Yucca Mountain Project. The term waste form refers to irradiated reactor fuel, other high-level waste (HLW) in various physical forms, and other radioactive materials (other than HLW) which are received for emplacement in a geologic repository. Any encapsulating of stabilizing matrix is also referred to as a waste form.

Stout, R.B.; Leider, H.R. [eds.

1991-10-11T23:59:59.000Z

258

FORMING PROTECTIVE FILMS ON METAL  

DOE Patents (OSTI)

Methods are described of inhibiting the corrosion of ferrous metal by contact with heavy liquid metals such as bismuth and gallium at temperatures above 500 icient laborato C generally by bringing nltrogen and either the metal zirconium, hafnium, or titanium into reactlve contact with the ferrous metal to form a thin adherent layer of the nitride of the metal and thereafter maintaining a fractional percentage of the metal absorbed in the heavy liquid metal in contact with the ferrous metal container. The general purpose for uslng such high boiling liquid metals in ferrous contalners would be as heat transfer agents in liquid-metal-fueled nuclear reactors.

Gurinsky, D.H.; Kammerer, O.F.; Sadofsky, J.; Weeks, J.R.

1958-12-16T23:59:59.000Z

259

DOE Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

U.S. Department of Energy Categorical Exclusion Determination Form Program or Field Office: TRIBAL ENERGY PROGRAM NV Project Title NV-TEP-WASHOE WISK'E'EM PROJECT Location: Tribal WASHOE WISK'E'EM PROJECT American Recovery and Reinvestment Act: Proposed Action or Project Description The Washoe Tribe of Nevada and California (Washoe Tribe) proposes to install four small (approximately 1.0-1.5 kW) vertical wind turbines at designated locations on Tribal lands to offset energy costs for the

260

Live visuals tutorial: part III  

Science Conference Proceedings (OSTI)

In this part of the course, we give a tutorial on how to compose live visuals. First, we talk about hardware and software setup needed for a live visual performance. Then we present concepts to prepare and organize huge media libraries allowing for instant ...

Pascal Mueller

2007-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "form parts iv-vii" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Integrally formed radio frequency quadrupole  

DOE Patents (OSTI)

An improved radio frequency quadrupole (10) is provided having an elongate housing (11) with an elongate central axis (12) and top, bottom and two side walls (13a-d) symmetrically disposed about the axis, and vanes (14a-d) formed integrally with the walls (13a-d), the vanes (14a-d) each having a cross-section at right angles to the central axis (12) which tapers inwardly toward the axis to form electrode tips (15a-d) spaced from each other by predetermined distances. Each of the four walls (13a-d), and the vanes (14a-d) integral therewith, is a separate structural element having a central lengthwise plane (16) passing through the tip of the vane, the walls (13a-d) having flat mounting surfaces (17, 18) at right angles to and parallel to the control plane (16), respectively, which are butted together to position the walls and vane tips relative to each other.

Abbott, Steven R. (Concord, CA)

1989-01-01T23:59:59.000Z

262

FermiCulture Subscription Form  

NLE Websites -- All DOE Office Websites (Extended Search)

The FermiCulture email list is used to send email announcements and reminders about upcoming cultural events at Fermilab (e.g., the Fermilab Arts, Film, and Lecture series). This is a private, announcement-only mail list and will never be used for spamming or discussions. Subscribers receive approximately five emails per month. Use the form below to subscribe to (or unsubscribe from) the FermiCulture list. The FermiCulture email list is used to send email announcements and reminders about upcoming cultural events at Fermilab (e.g., the Fermilab Arts, Film, and Lecture series). This is a private, announcement-only mail list and will never be used for spamming or discussions. Subscribers receive approximately five emails per month. Use the form below to subscribe to (or unsubscribe from) the FermiCulture list. Email address: Name (First Last): Subscribe to email list Unsubscribe from email list Send Reset The Regular Mailing List If you would like to receive mailings through the regular mail of upcoming cultural events at Fermilab and are not on our mailing list, then please fill out the information below. Name: Address: City: State: Zip: Country: E-mail:

263

A1. Form EIA-176 Figure Energy Information Administration  

Gasoline and Diesel Fuel Update (EIA)

Form EIA-176 Form EIA-176 Figure Energy Information Administration / Natural Gas Annual 1996 214 EIA-176, ANNUAL REPORT OF NATURAL AND SUPPLEMENTAL GAS SUPPLY AND DISPOSITION, 19 PART IV: SUPPLY OF NATURAL AND SUPPLEMENTAL GAS RECEIVED WITHIN OR TRANSPORTED INTO REPORT STATE RESPONDENT COPY Page 2 PART III: TYPE OF COMPANY AND GAS ACTIVITIES OPERATED IN THE REPORT STATE 1.0 Type of Company (check one) 1.0 Control No. 2.0 Company Name 3.0 Report State 4.0 Resubmittal EIA Date: a b c d e Investor owned distributor Municipally owned distributor Interstate pipeline Intrastate pipeline Storage operator f g h i j SNG plant operator Integrated oil and gas Producer Gatherer Processor k Other (specify) 2.0 Gas Activities Operated On-system Within the Report State (check all that apply) a b c d e Produced Natural Gas

264

Document Control Template-Form  

NLE Websites -- All DOE Office Websites (Extended Search)

4 Publication Review and Approval 11_0608.doc608 Page 1 of 3 4 Publication Review and Approval 11_0608.doc608 Page 1 of 3 EOTA - Business Form Document Title: Publication Review and Approval Document Number: ITTF-014 Rev. 11_0608 Document Owner: Ben Aragon Backup Owner: Janet Lee Approver(s): Melissa Otero Parent Document: ITTP-015 Website Development Maintenance Notify of Changes: EOTA Employees Referenced Document(s): N/A ITTF-014 Publication Review and Approval 11_0608.doc608 Page 2 of 3 Revision History: Rev. Description of Changes A Initial Release 08_0523 Added review section for QA. Added "Approved w/changes" section. Changed "Corrections" and "Reason" to "Recommendations". Adjusted spacing on document. 08_1105 Added review section for Project Manager. Adjusted spacing on document.

265

Form factors from lattice QCD  

Science Conference Proceedings (OSTI)

Precision computation of hadronic physics with lattice QCD is becoming feasible. The last decade has seen precent-level calculations of many simple properties of mesons, and the last few years have seen calculations of baryon masses, including the nucleon mass, accurate to a few percent. As computational power increases and algorithms advance, the precise calculation of a variety of more demanding hadronic properties will become realistic. With this in mind, I discuss the current lattice QCD calculations of generalized parton distributions with an emphasis on the prospects for well-controlled calculations for these observables as well. I will do this by way of several examples: the pion and nucleon form factors and moments of the nucleon parton and generalized-parton distributions.

Dru Renner

2012-04-01T23:59:59.000Z

266

National Nuclear Security Administration Categorical Exclusion Determination Form  

National Nuclear Security Administration (NNSA)

National Nuclear Security Administration National Nuclear Security Administration Categorical Exclusion Determination Form NEPA ID#: Proposed Action Title: Program or Field Office: Location(s) (City/County/State): Proposed Action Description: Categorical Exclusion(s) Applied: For the complete DOE National Environmental Policy Act regulations regarding categorical exclusions, including the full text of each categorical exclusion, see Subpart D of 10 CFR Part 1021. Regulatory Requirements in 10 CFR 1021.410(b): (See full text in regulation) The proposal fits within a class of actions that is listed in Appendix A or B to 10 CFR Part 1021, Subpart D. To fit within the classes of actions listed in 10 CFR Part 1021, Subpart D, Appendix B, a proposal must be one that would not: (1) threaten

267

ACHRE Report: Part I Overview  

NLE Websites -- All DOE Office Websites (Extended Search)

Part I: Overview Part I: Overview When the Advisory Committee began work in April 1994 we were charged with determining whether "the [radiation] experiments' design and administration adequately met the ethical and scientific standards, including standards of informed consent, that prevailed at the time of the experiments and that exist today" and also to "determine the ethical and scientific standards and criteria by which it shall evaluate human radiation experiments." Although this charge seems straightforward, it is in fact difficult to determine what the appropriate standards should be for evaluating the conduct and policies of thirty or fifty years ago. First, we needed to determine the extent to which the standards of that time are similar to the standards of today. To the extent that there were differences we needed to determine the relative roles of each in making moral evaluations.

268

Geometric Qualification of Production Parts  

SciTech Connect

Computer Aided Design (CAD) is a commonly utilized software tool to conceptualize and create the part designs that are then used as input for product definition, or for the manufacture of production parts within commercial industry and, more specifically, at the Kansas City Plant (KCP). However, data created on CAD systems is, at times, unable to regenerate within the originating CAD system or be shared or translated for use by a dissimilar CAD system. Commercial software has been developed to help identify or qualify these difficulties that occur in the usage of this data. This project reviewed the different commercial software packages available for the activity of qualification and made recommendations for availability and use in the design processes at the KCP prior to the release of the product definition.

J. A. Bradley

2005-09-30T23:59:59.000Z

269

CAIRS Registration Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

HSS InfoCenter at (301) 903-9823 CAIRS Registration Form More Documents & Publications ORPS User Registration Form Fire Protection System Account Request Form Policy Flash 2013-15...

270

DUF6 EIS Public Comment Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Public Comment Form Public Comment Form The public comment period for the Depleted UF6 Supplemental Analysis is closed. The public comment form is no longer available. Sorry The...

271

How is an egg shell formed?  

NLE Websites -- All DOE Office Websites (Extended Search)

How is an egg shell formed? Name: Tim Location: NA Country: NA Date: NA Question: How is an egg shell formed? Replies: Egg shells are formed by a complex interaction between a...

272

Form:Property | Open Energy Information  

Open Energy Info (EERE)

Form Edit History Facebook icon Twitter icon Form:Property Jump to: navigation, search Form to create Properties. Enter a name and the Property will be created in Property...

273

Classical and quantal atomic form factors for arbitrary transitions D. Vrinceanu and M. R. Flannery  

E-Print Network (OSTI)

to collision with particles or exposure to electromagnetic radiation which induces a sudden change q be decomposed into an internal structure part, provided by the form factor of the target, and a dynamic part is the probability of an internal transition arising from any external impulsive perturbation whether due

274

Labor Standards Interview Form | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Standards Interview Form Labor Standards Interview Form SF 1445.pdf More Documents & Publications Labor Standards for Construction Chapter 22 - Labor Standards for Construction CRB...

275

DOE Forms Management FAQ's | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Departmental Form (developed for use department-wide by DOE personnel only) Headquarters (HQ) Form (developed or managed by a DOE Headquarters organization and are generally for...

276

RRC Form H-1 | Open Energy Information  

Open Energy Info (EERE)

Login | Sign Up Search Page Edit with form History Facebook icon Twitter icon RRC Form H-1 Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Reference...

277

Change Request Forms | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Link - Under Development NMMSS Change of Authorized Contacts Response Form (Last updated: August 14, 2013) NMMSS Change of Project Number Response Form (Last updated: August 14,...

278

Fermilab at Work | Manuals and Forms  

NLE Websites -- All DOE Office Websites (Extended Search)

Performance Appraisal Forms Procedures for Researchers (PFX) Records Storage (RSD) Form Safety Manuals Time and Labor Reporting Tune IT Up Travel Policies Last modified: 0220...

279

Form:Utility Rate | Open Energy Information  

Open Energy Info (EERE)

Form Edit History Facebook icon Twitter icon Form:Utility Rate Jump to: navigation, search Add or Update Utility Rate Information Retrieved from "http:en.openei.orgw...

280

Form:ExplorationActivity | Open Energy Information  

Open Energy Info (EERE)

Form Edit History Facebook icon Twitter icon Form:ExplorationActivity Jump to: navigation, search Input a name below to add an "Exploration Activity'. If the activity already...

Note: This page contains sample records for the topic "form parts iv-vii" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Novel silicon fabrication process for high-aspect-ratio micromachined parts  

Science Conference Proceedings (OSTI)

Bulk micromachining generally refers to processes involving wet chemical etching of structures formed out of the silicon substrate and so is limited to fairly large, crude structures. Surface micromachining allows intricate patterning of thin films of polysilicon and other materials to form essentially two-dimensional layered parts (since the thickness of the parts is limited by the thickness of the deposited films). There is a third type of micromachining in which the part is formed by filling a mold which was defined by photolithographic means. Historically micromachining molds have been formed in some sort of photopolymer, be it with x-ray lithography (``LIGA``) or more conventional UV lithography, with the aim of producing piece parts. Recently, however, several groups including ours at Sandia have independently come up with the idea of forming the mold for mechanical parts by etching into the silicon substrate itself. In Sandia`s mold process, the mold is recessed into the substrate using a deep silicon trench etch, lined with a sacrificial or etch-stop layer, and then filled with any of a number of mechanical materials. The completed structures are not ejected from the mold to be used as piece parts rather, the mold is dissolved from around selected movable segments of the parts, leaving the parts anchored to the substrate. Since the mold is recessed into the substrate, the whole micromechanical structure can be formed, planarized, and integrated with standard silicon microelectronic circuits before the release etch. In addition, unlike surface-micromachined parts, the thickness of the molded parts is limited by the depth of the trench etch (typically 10--50 {mu}m) rather than the thickness of deposited polysilicon (typically 2 {mu}m). The capability of fabricating thicker (and therefore much stiffer and more massive) parts is critical for motion-sensing structures involving large gimballed platforms, proof masses, etc.

Fleming, J.G.; Barron, C.C.

1995-08-01T23:59:59.000Z

282

Ex parte communication | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

summary of ex parte discussion with Mitsubishi on Variable Refrigerant Flow HVAC systems Ex parte communication More Documents & Publications Mitsubishi Electric:...

283

Optical apparatus for forming correlation spectrometers and optical processors  

DOE Patents (OSTI)

Optical apparatus is disclosed for forming correlation spectrometers and optical processors. The optical apparatus comprises one or more diffractive optical elements formed on a substrate for receiving light from a source and processing the incident light. The optical apparatus includes an addressing element for alternately addressing each diffractive optical element thereof to produce for one unit of time a first correlation with the incident light, and to produce for a different unit of time a second correlation with the incident light that is different from the first correlation. In preferred embodiments of the invention, the optical apparatus is in the form of a correlation spectrometer; and in other embodiments, the apparatus is in the form of an optical processor. In some embodiments, the optical apparatus comprises a plurality of diffractive optical elements on a common substrate for forming first and second gratings that alternately intercept the incident light for different units of time. In other embodiments, the optical apparatus includes an electrically-programmable diffraction grating that may be alternately switched between a plurality of grating states thereof for processing the incident light. The optical apparatus may be formed, at least in part, by a micromachining process. 24 figs.

Butler, M.A.; Ricco, A.J.; Sinclair, M.B.; Senturia, S.D.

1999-05-18T23:59:59.000Z

284

Microsoft Word - SS Part A ERUS 2014 12 17 13.docx  

Gasoline and Diesel Fuel Update (EIA)

Supporting Statement for Survey Clearance: Supporting Statement for Survey Clearance: Electric Power & Renewable Electricity Surveys Part A: Justification Assistant Administrator for Energy Statistics | Office of Electricity, Renewables & Uranium Statistics OMB Number 1905-0129 Independent Statistics & Analysis www.eia.gov U.S. Department of Energy Washington, DC 20585 FORM EIA-63B, Annual Photovoltaic Cell/Module Shipments Report FORM EIA-411, Coordinated Bulk Power Supply Program Report FORM EIA-826, Monthly Electric Utility Sales and Revenue Report with State Distributions FORM EIA-860, Annual Electric Generator Report FORM EIA-860M, Monthly Update to the Annual Electric Generator Report FORM EIA-861, Annual Electric

285

Environmental Degradation Nuclear IX-Housing Form  

Science Conference Proceedings (OSTI)

ENVIRONMENTAL DEGRADATION OF MATERIALS IN NUCLEAR POWER SYSTEMSWATER REACTORS. HOUSING. RESERVATION FORM.

286

Canonical Forms for Symmetric and Regular Structures  

Science Conference Proceedings (OSTI)

Matrices associated with symmetric and regular structures can be arranged into certain block patterns known as Canonical forms. Using such forms, the decomposition of structural matrices into block diagonal forms, is considerably simplified. In this ... Keywords: 15A18, 74S05, Block diagonalization, Decomposition, Group theory, Matrix canonical form, Regular structure, Symmetric structure

Ali Kaveh; H. Fazli

2012-06-01T23:59:59.000Z

287

EIA - 2008 New Electric Power Forms  

Gasoline and Diesel Fuel Update (EIA)

New Electricity Survey Forms New Electricity Survey Forms What's happening with electric power forms? In 2008 EIA is consolidating 6 data collection forms into 2 forms. Fill out forms electronically (Available soon!) Not registered? Why is that a good thing? * For Electricity Generators: This reduces the number of forms to submit. (Re-registering is not required!) * For EIA and Taxpayers: This streamlines the collection process for better efficiency. * For Everyone: This enables us to provide additional information about the electric power industry. figure showing what electricity forms merge into the new forms Click for more information on the New EIA-860 Click for more information on the New EIA-923 Resources to help you with the changes Printable Forms & Instructions 923 860

288

FORMING AN O STAR VIA DISK ACCRETION?  

Science Conference Proceedings (OSTI)

We present a study of outflow, infall, and rotation in a {approx}10{sup 5} L{sub Sun} star-forming region, IRAS 18360-0537, with Submillimeter Array and IRAM 30 m observations. The 1.3 mm continuum map shows a 0.5 pc dust ridge, of which the central compact part has a mass of {approx}80 M{sub Sun} and harbors two condensations, MM1 and MM2. The CO (2-1) and SiO (5-4) maps reveal a biconical outflow centered at MM1, which is a hot molecular core (HMC) with a gas temperature of 320 {+-} 50 K and a mass of {approx}13 M{sub Sun }. The outflow has a gas mass of 54 M{sub Sun} and a dynamical timescale of 8 Multiplication-Sign 10{sup 3} yr. The kinematics of the HMC are probed by high-excitation CH{sub 3}OH and CH{sub 3}CN lines, which are detected at subarcsecond resolution and unveil a velocity gradient perpendicular to the outflow axis, suggesting a disk-like rotation of the HMC. An infalling envelope around the HMC is evidenced by CN lines exhibiting a profound inverse P Cygni profile, and the estimated mass infall rate, 1.5 Multiplication-Sign 10{sup -3} M{sub Sun} yr{sup -1}, is well comparable to that inferred from the mass outflow rate. A more detailed investigation of the kinematics of the dense gas around the HMC is obtained from the {sup 13}CO and C{sup 18}O (2-1) lines; the position-velocity diagrams of the two lines are consistent with the model of a free-falling and Keplerian-like rotating envelope. The observations suggest that the protostar of a current mass {approx}10 M{sub Sun} embedded within MM1 will develop into an O star via disk accretion and envelope infall.

Qiu Keping [Max-Planck-Institut fuer Radioastronomie, Auf dem Huegel 69, D-53121 Bonn (Germany); Zhang Qizhou [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States); Beuther, Henrik; Fallscheer, Cassandra, E-mail: kqiu@mpifr-bonn.mpg.de [Max-Planck-Institut fuer Astronomie, Koenigstuhl 17, D-69117 Heidelberg (Germany)

2012-09-10T23:59:59.000Z

289

The University of Texas at Austin Jan-02 PART I CRIMES Reported Unfounded Actual Cleared % Clrd.  

E-Print Network (OSTI)

The University of Texas at Austin Jan-02 PART I CRIMES Reported Unfounded Actual Cleared % Clrd. 1 Theft Total $280 $280 Total % Rcvd 0.4% DP Form #31 - Page 1(Rev. 1/93) #12;The University of Texas/93)Co #12;The University of Texas at Austin Jan-02 PART I CRIMES BURGLARY & THEFT TARGET SECTION (List

Johns, Russell Taylor

290

CAPITAL PROGRAMMING GUIDE (PART 7)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CAPITAL PROGRAMMING GUIDE CAPITAL PROGRAMMING GUIDE V 2.0 SUPPLEMENT TO OFFICE OF MANAGEMENT AND BUDGET CIRCULAR A-11, PART 7: PLANNING, BUDGETING, AND ACQUISITION OF CAPITAL ASSETS JUNE 2006 CAPITAL PROGRAMMING GUIDE LIST OF ABBREVIATIONS LIST OF ABBREVIATIONS ACP Agency Capital Plan CI Commercial Items COTS Commercial-off-the-shelf ESPC Energy Savings Performance Contract EVM Earned Value Management FAR Federal Acquisition Regulation FARA Federal Acquisition Reform Act (Clinger-Cohen Act) of 1996 1 (Division D of Pub. L. No. 104-106) FASA Federal Acquisition Streamlining Act of 1994 (Pub. L. No. 103-355) FRPC Federal Real Property Council GAO Government Accountability Office GPRA Government Performance and Results Act of 1993 (Pub. L. No. 103-62)

291

The Effect of Breaking Waves on a Coupled Model of Wind and Ocean Surface Waves. Part I: Mature Seas  

Science Conference Proceedings (OSTI)

This is the first of a two-part investigation of a coupled wind and wave model that includes the enhanced form drag of breaking waves. In Part I here the model is developed and applied to mature seas. Part II explores the solutions in a wide ...

Tobias Kukulka; Tetsu Hara

2008-10-01T23:59:59.000Z

292

Process GovernancePart II Process GovernancePart II  

E-Print Network (OSTI)

Process Governance is important and necessary in all business sectors, because: 1-organizations have to protect their interest in solving whatever old and new problems they encounter; 2- Process Management has many applications (knowledge management, information system design and implementation, etc.); 3- within organizations, different units/areas express different interests in Process Management; 4- Process Management initiatives can be integrated according to the benefits they generate; 5- power over cross processes should be balanced, i.e., in Process Management there should be persons responsible and others co-responsible for certain actions; and 6- Process Management yields results for all involved; this, in the long term, will lead to disputes over responsibilities in its field of action. In order to enable organizations to create and adopt models of Process Governance, some authors on the subject define frameworks that structure the field in which Governance is conceived and operated. The main definitions and frameworks set out in the literature were discussed in Process Governance Part I published in the October BPTrends Update. Drawing on analysis of these existing Process Governance architectures, on vast experience in consulting projects in companies representing a wide diversity of industries, and on research

Rafael Paim; Raquel Flexa

2011-01-01T23:59:59.000Z

293

Change Request Forms | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Change Request Forms | National Nuclear Security Administration Change Request Forms | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Change Request Forms Home > About Us > Our Programs > Nuclear Security > Nuclear Materials Management & Safeguards System > NMMSS Information, Reports & Forms > Change Request Forms Change Request Forms

294

Ex Parte Communications | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Open Government » Ex Parte Communications Open Government » Ex Parte Communications Ex Parte Communications Ex Parte Communication Guidance Guidance on Ex Parte Communications in Rulemaking Proceedings (October 2009) Ex Parte Communications Received Assistance to Foreign Atomic Energy Activities Nuclear Energy Institute Letter Regarding Proposed Revision of 10 CFR 810 - (March 13, 2012) Exelon Statement Regarding Nuclear Safety and 10 CFR 810 - (May 9, 2012) Nuclear Energy Institute Regarding Proposed Revision of 10 CFR 810 - (June 11, 2012) Ex Parte Communication with the Department of Energy - (August 1, 2013) Memorandum of Ex Parte Communication with the Department of Energy - (August 21, 2013) Memo for the Initial GAO Meeting on Part 810 - (September 10, 2013) American Nuclear Society (ANS) - October 28, 2013

295

Musical form in non-narrative video  

E-Print Network (OSTI)

"Musical Form in Non- Narrative Video" explores musical structure as a model for visual form over time, specifically in the creation of artistic video. Video is a medium in which sound and image coexist at the source as ...

Sebring, Ellen Irene

1986-01-01T23:59:59.000Z

296

Form:Buildings Model | Open Energy Information  

Open Energy Info (EERE)

Buildings Model Jump to: navigation, search This is the 'Buildings Model' form. To add a page with this form, enter the page name below; if a page with that name already exists,...

297

Form:Buildings Publication | Open Energy Information  

Open Energy Info (EERE)

Buildings Publication Jump to: navigation, search This is the 'Buildings Publication' form. To add a page with this form, enter the page name below; if a page with that name...

298

FORMS AND INSTRUCTIONS FOR SUBMITTING ELECTRIC  

E-Print Network (OSTI)

CALIFORNIA ENERGY COMMISSION FORMS AND INSTRUCTIONS FOR SUBMITTING ELECTRIC TRANSMISSION Instructions for Electric Transmission Forms ............................................................. 6 Electric transmission, transmission corridor, data request. #12;1 Background The California Energy

299

An Alternative Form for Potential Vorticity  

Science Conference Proceedings (OSTI)

A form of potential vorticity is described that has conservation properties similar to those of Ertel's potential vorticity (EPV) but removes the exponential variation with height displayed by EPV. This form is thus more suitable for inspecting ...

Leslie R. Lait

1994-06-01T23:59:59.000Z

300

FINAL STAFF REPORT FORMS AND INSTRUCTIONS FOR  

E-Print Network (OSTI)

is acceptable, but a narrative should explain the units reported (for example, number of customers or number .................................................9 Form 1.3 Peak Demand by Sector (Bundled Customers..................................................................................................12 Form 2.3 Customer Counts and Other Inputs

Note: This page contains sample records for the topic "form parts iv-vii" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Metered Mail Form International Mail Only  

E-Print Network (OSTI)

Metered Mail Form International Mail Only Charge to Department USPS First Class Mail International International Metered Mail Form and must be kept separate from all other domestic mail. · International mail

Palmeri, Thomas

302

Form W-9 (Rev. January 2011)  

NLE Websites -- All DOE Office Websites (Extended Search)

to establish your U.S. status and avoid withholding on your share of partnership income. Cat. No. 10231X Form W-9 (Rev. 1-2011) Form W-9 (Rev. 1-2011) Page 2 The person who gives...

303

Appendix C - Forms for Reporting State Data  

NLE Websites -- All DOE Office Websites (Extended Search)

C - Forms for Reporting State Data Copies of the two forms used by States to report motor fuel use are attached. FHWA-551M reports a monthly consumption of motor fuel. (2 page...

304

Form:RRSection | Open Energy Information  

Open Energy Info (EERE)

Form Edit History Facebook icon Twitter icon Form:RRSection Jump to: navigation, search Enter the title of the Geothermal Regulatory Roadmap section you would like to create. If...

305

Form:Utility Company | Open Energy Information  

Open Energy Info (EERE)

Form Edit History Facebook icon Twitter icon Form:Utility Company Jump to: navigation, search Input your utility company name below to add to the registry. If the company is...

306

Form EIA-861 Instructions - Energy Information Administration  

U.S. Energy Information Administration (EIA)

PART C. GREEN PRICING. Green Pricing Programs are Voluntary Retail Programs. ... An entity sells Green Energy for an additional $5.50 per 100 kWh block:

307

Microsoft Word - record_of_invention form  

Record of Invention. ... taking care to identify each part clearly in the description of the invention. D.4. Disclosure to others should be by written ...

308

On a New Form of Quantum Mechanics  

E-Print Network (OSTI)

We propose a new form of nonrelativistic quantum mechanics which is based on a quantum version of the action principle.

N. N. Gorobey; A. S. Lukyanenko

2008-07-22T23:59:59.000Z

309

Employee Concerns Reporting Form | National Nuclear Security...  

National Nuclear Security Administration (NNSA)

Reporting Form | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing...

310

Electronic Comment Form | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Electronic Comment Form | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response...

311

Building Public Trust: Part 2  

NLE Websites -- All DOE Office Websites (Extended Search)

2: Protecting Future Human Subjects 2: Protecting Future Human Subjects Overview The success of the effort to open the historical record will be measured, in part, by whether we avoid repeating the mistakes of the past. ACHRE's review of human radiation experiments raised questions of whether the current system of protection is adequate for all types of human subjects research. The measures described below will strengthen the protection of human subjects and address ACHRE's findings. The measures described below will strengthen the protection of human subjects and address ACHRE's findings. Federal responsibilities for maintaining ethics in human subjects research are dispersed in several agencies and committees in the government. First, each agency is responsible for the ethical admin-istration of its programs, including grants and contracts. Second, the President's Office of Science and Technology Policy has a statutory oversight role, and will continue to monitor and address issues of science and ethics. Third, the Department of Health and Human Services has a convening role among agencies that are bound by the Common Rule the Federal Policy for the Protection of Human Subjects which, along with Food and Drug Administration (FDA) regulations, governs all federally conducted, funded, or regulated research (56 Federal Register 28010, June 18, 1991). Finally, the National Bioethics Advisory Commission (NBAC) an independent body recently established by the President is taking up some of the most pressing ethical issues faced by this country.

312

ORPS Facility Registration Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Facility Registration Form Facility Registration Form ORPS Facility Registration Form August 9, 2007 Add, Change or Delete a Facility for Occurrence Reporting and Processing System Submit completed form to: U.S. Department of Energy HSS InfoCenter, HS-1.22, 270CC 1000 Independence Ave., SW Washington, DC 20585-0270 FAX: 301-903-9823 PHONE: 800-473-4375 Note: Only one facility per form Type or print all entries TYPE OF CHANGE: Add a Facility (Complete Section 1.A, then go to Section 2) Change a Facility (Complete Section 1.B, then go to Section) Delete a Facility (Complete Section 1.C, then go to Section 2) ORPS Facility Registration Form More Documents & Publications ORPS User Registration Form DOE-TSPP-9, Maintenance of DOE Technical Standards - August 1, 2000 EA-1442: Final Environmental Assessment

313

Interpolation (Part I) - CECM - Simon Fraser University  

E-Print Network (OSTI)

... ' &. $. %. Overview. ? Polynomial interpolation. ? The basic theorem. ? Lagrange form, Neville's method. ? Divided-difference method. ? Hermite interpolation.

314

Electrochemical Apparatus with Disposable and Modifiable Parts  

NLE Websites -- All DOE Office Websites (Extended Search)

Electrochemical Apparatus with Disposable and Modifiable Parts Electrochemical Apparatus with Disposable and Modifiable Parts Electrochemical Apparatus with Disposable and Modifiable Parts The invention also includes electrochemical apparatus that can interface with optical instrumentation. If the working electrode is transparent, light from an optical fiber may be directed through the working electrode and into a cuvette. July 3, 2013 Electrochemical Apparatus with Disposable and Modifiable Parts Available for thumbnail of Feynman Center (505) 665-9090 Email Electrochemical Apparatus with Disposable and Modifiable Parts Applications: Electrochemical experiments in solution Electrochemical experiments on surfaces Bulk electrolysis experiments Fuel cells Corrosion studies Academic Labs Teaching and research Benefits: Incorporates disposable, commercially available cuvettes

315

Part B - Requirements & Funding Information PART B - Requirements and Funding Information  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

b. Part B 1 b. Part B 1 Part B - Requirements & Funding Information PART B - Requirements and Funding Information Gray highlights are instructions. Remove the instructions from the interagency agreement. Attachment 3.b. Part B 2 PART B - Requirements & Funding Information B.1. Purpose This is an interagency transaction. An interagency transaction is an intra-governmental transaction when the servicing agency uses internal resources to support the requesting agency requirement and is a reimbursable activity that requires an interagency agreement. This Part of the interagency agreement (IA) (hereinafter 'Part B') serves as the funding document. It provides specific information on the requirements of the Department of Energy, hereinafter 'the Requesting

316

Secondary Waste Form Down Selection Data Package Ceramicrete  

SciTech Connect

As part of high-level waste pretreatment and immobilized low activity waste processing, liquid secondary wastes will be generated that will be transferred to the Effluent Treatment Facility on the Hanford Site for further treatment. These liquid secondary wastes will be converted to stable solid waste forms that will be disposed in the Integrated Disposal Facility. Currently, four waste forms are being considered for stabilization and solidification of the liquid secondary wastes. These waste forms are Cast Stone, Ceramicrete, DuraLith, and Fluidized Bed Steam Reformer. The preferred alternative will be down selected from these four waste forms. Pacific Northwest National Laboratory is developing data packages to support the down selection process. The objective of the data packages is to identify, evaluate, and summarize the existing information on the four waste forms being considered for stabilization and solidification of the liquid secondary wastes. The information included will be based on information available in the open literature and from data obtained from testing currently underway. This data package is for the Ceramicrete waste form. Ceramicrete is a relatively new engineering material developed at Argonne National Laboratory to treat radioactive and hazardous waste streams (e.g., Wagh 2004; Wagh et al. 1999a, 2003; Singh et al. 2000). This cement-like waste form can be used to treat solids, liquids, and sludges by chemical immobilization, microencapsulation, and/or macroencapsulation. The Ceramicrete technology is based on chemical reaction between phosphate anions and metal cations to form a strong, dense, durable, low porosity matrix that immobilizes hazardous and radioactive contaminants as insoluble phosphates and microencapsulates insoluble radioactive components and other constituents that do not form phosphates. Ceramicrete is a type of phosphate-bonded ceramic, which are also known as chemically bonded phosphate ceramics. The Ceramicrete binder is formed through an acid-base reaction between calcined magnesium oxide (MgO; a base) and potassium hydrogen phosphate (KH{sub 2}PO{sub 4}; an acid) in aqueous solution. The reaction product sets at room temperature to form a highly crystalline material. During the reaction, the hazardous and radioactive contaminants also react with KH{sub 2}PO{sub 4} to form highly insoluble phosphates. In this data package, physical property and waste acceptance data for Ceramicrete waste forms fabricated with wastes having compositions that were similar to those expected for secondary waste effluents, as well as secondary waste effluent simulants from the Hanford Tank Waste Treatment and Immobilization Plant were reviewed. With the exception of one secondary waste form formulation (25FA+25 W+1B.A. fabricated with the mixed simulant did not meet the compressive strength requirement), all the Ceramicrete waste forms that were reviewed met or exceeded Integrated Disposal Facility waste acceptance criteria.

Cantrell, Kirk J.; Westsik, Joseph H.

2011-08-31T23:59:59.000Z

317

Ex Parte Memorandum | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Parte Memorandum Parte Memorandum Ex Parte Memorandum On Wednesday, May 5, 2010, representatives from various signatories to the consensus agreement met with representatives from the Department of Energy. Advocates for the consensus agreement urged the Department of Energy to adopt the entire agreement, except provisions relating to building codes which require congressional action. The parties also discussed the need to develop effective enforcement mechanisms in general, and in particular if the Department of Energy decides to adopt regional standards for the residential heating and cooling systems covered by the consensus agreement. Ex Parte Memorandum More Documents & Publications Ex Parte Memorandum Ex Parte Memorandum - Natural Resources Defense Council Docket No. EERE-2011-BT-NOA-0067 and RIN Number 1904-AC52 Ex parte

318

ProForm | Open Energy Information  

Open Energy Info (EERE)

ProForm ProForm Jump to: navigation, search Tool Summary Name: ProForm Agency/Company /Organization: Lawrence Berkeley National Laboratory Sector: Climate, Energy Focus Area: - Landfill Gas, Energy Efficiency, Solar, Wind Topics: Co-benefits assessment, - Environmental and Biodiversity, Finance Resource Type: Software/modeling tools User Interface: Spreadsheet Complexity/Ease of Use: Moderate Website: poet.lbl.gov/Proform/ Cost: Paid References: ProForm[1] Related Tools ICCT Roadmap Model General Equilibrium Modeling Package (GEMPACK) Modeling International Relationships in Applied General Equilibrium (MIRAGE) ... further results Find Another Tool FIND DEVELOPMENT IMPACTS ASSESSMENT TOOLS Logo: ProForm ProForm is a software tool designed to support a basic assessment of the

319

Paperclips Supply Store Forms | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Paperclips Supply Store Forms Paperclips Supply Store Forms Paperclips Supply Store Forms Catalog Order Form for Non-Stocked or Specialty Items For any non-stocked or special item that needs to be ordered, the Catalog Order Form (pdf) needs to be filled in. All supplies ordered MUST be used for Official Government Business. All catalog orders are subject to full payment or a restocking fee if items ordered are returned to the supplier due to the customer not picking up the item(s) within five days of receipt by the store personnel or the customer deciding to return the item(s). This form is fillable and also saveable with the Acrobat Reader or through your web browser. Request Supply Store Purchasing Authority for a Non-Federal Employee In order for non-federal headquarters personnel to gain access to make

320

Quick Plastic Forming of Aluminum Sheet Metal  

NLE Websites -- All DOE Office Websites (Extended Search)

General Motors' President North America, Gary Cowger, General Motors' President North America, Gary Cowger, reviews the 2004 Chevy Malibu Maxx after introducing it to the media at the New York Auto Show. (photo courtesy of General Motors) Quick Plastic Forming of Aluminum Sheet Metal Background Aluminum automotive components made using a hot blow forming process are reducing vehicle weight and increasing the fuel efficiency of today's cars. However, before General Motors (GM) and the U.S. Department of Energy (DOE) sponsored research in this technol- ogy, blow forming of aluminum was not a viable process for automakers. The prior blow forming process,

Note: This page contains sample records for the topic "form parts iv-vii" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Security Forms | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Management & Safeguards System Security Forms Federal Information Processing Standards Publications (FIPS PUBS) FIPS-Associated Documents FIPS 140-2 Security Requirements...

322

Fermilab | Take Five for Goal Zero | Forms  

NLE Websites -- All DOE Office Websites (Extended Search)

Forms Work Planning Work Permit & Notification Hazard Analysis Electrical Hazard Analysis Pressure Testing Permit General LOTO Procedure Excavation Permit NEPA Project Information...

323

Configuration Change Proposal Form | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

and Office Management Areas. Green-DNS-Form09.doc More Documents & Publications Cyber Security Procurement Language for Control Systems Version 1.8 OPC Security Whitepaper...

324

Frequently Asked Questions Form EIA-857  

U.S. Energy Information Administration (EIA) Indexed Site

Natural Gas Survey Forms FAQ Natural Gas Survey Forms FAQ EIA-857, "Monthly Report of Natural Gas Purchases and Deliveries to Consumers" You may always call Amy Sweeney for assistance at (202) 586-2627 or e-mail us at OOG.SURVEYS@eia.gov. Q1. How do I get a copy of the form and/or the instructions? Q2. What version of the form should I use? Q3. How do I submit the form? Q4. When is the form due? Q5. My company does not have the information required on the Form EIA-857 within 30 days after the end of the report month. Can we get an extension? Q6. Who should I inform of a change in the contact person in our company for Form EIA-857? Q7. Who should I inform if our company is sold, merged with another company, or buys another natural gas company? Q8. Why does my company always get selected to file Form EIA-857?

325

SPRAY FORMING--EXPERIMENT, ANALYSIS, AND ... - TMS  

Science Conference Proceedings (OSTI)

... Jt. EPD/MDMD Synthesis Control & Analysis in Materials Processing .... IN THE SPRAY-FORMED ALUMINUM ALLOY PREFORMS: Ram B. Bhagat, Maurice...

326

Ocean Feedback Form | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Feedback Form Ocean Data Tools Technical Guide Map Gallery Regional Planning Feedback Ocean You are here Data.gov Communities Ocean Comments or Suggestions Name * Email Topic...

327

2000 TMS Annual Meeting Housing Form  

Science Conference Proceedings (OSTI)

Feb 18, 2000 ... PLEASE COMPLETE THE FORM BELOW AND RETURN TO: Opryland Hotel & Convention Center. Attn: Reservations Manager (c-mmm).

328

Spray Forming: Alloys, Products, and Markets  

Science Conference Proceedings (OSTI)

Due to the single-step processing cycle, spray-formed aluminum alloys can be produced at substantially lower costs than P/M products, approaching cost levels ...

329

SPRAY FORMING--EXPERIMENT, ANALYSIS, AND ...  

Science Conference Proceedings (OSTI)

In addition, details of the requirements for large-scale production of spray-formed alloys and process developments to reduce costs and improve product...

330

Assessment of Preferred Depleted Uranium Disposal Forms  

NLE Websites -- All DOE Office Websites (Extended Search)

. . 7 3.2 PRELIMINARY ASSESSMENT OF DU DISPOSAL AT OTHER SITES . . . . . . . . . . 8 3.3 COSTS OF PRODUCTION, TRANSPORTATION, AND DISPOSAL OF DU WASTE FORMS . . . . . . . . . . ....

331

Request for Training Exemption/Waiver Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Modified for use by Photon Sciences Effective 06282013 Photon Sciences Request for Training Reciprocity Form For General Employee Radiological Training (GERT) Individuals may be...

332

Questions and Answers - How do atoms form?  

NLE Websites -- All DOE Office Websites (Extended Search)

(Biggest and smallest atom?) Questions and Answers Main Index Next Question (Does gravity affect atoms?) Does gravity affect atoms? How do atoms form? The current view is that...

333

Sample Forms | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Sample Forms Home > About Us > Our Programs > Nuclear Security > Nuclear Materials Management &...

334

Security Forms | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Security Forms Home > About Us > Our Programs > Nuclear Security > Nuclear Materials...

335

Julian Szekely Memorial Symposium Registration Form  

Science Conference Proceedings (OSTI)

... housing reservations by downloading and mailing or faxing the Housing Reservation Form, which is an Adobe Acrobat portable document format (.pdf) file .

336

Alumina-forming Austenitic Alloys Licensed | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

for alumina scales to form on the exterior of the steel, which provides significant oxidation resistance. In addition, the alloy displays excellent creep strength at high...

337

For Researchers: Forms and Policies - Lawrence Berkeley ...  

Policy: Conflict of Interest in Licensing. Form: Conflict of Interest TT 100-LBNL (.doc) ... U.S. DEPARTMENT OF ENERGY OFFICE OF SCIENCE UNIVERSITY OF CALIFORNIA.

338

SPARQL Query Form | OpenEI  

Open Energy Info (EERE)

624878 Varnish cache server SPARQL Query Form Default Graph URI Query text select distinct ?Concept where a ?Concept LIMIT 100 Display Results As: Auto HTML Spreadsheet XML...

339

Fermilab at Work - Manuals and Forms  

NLE Websites -- All DOE Office Websites (Extended Search)

Fermilab at Work Home Home FAW Home Fermilab Now Directories and Maps Work Resources Policies and Forms Administration Lab Life Physics Links Experiments and Projects Divisions and...

340

CRA Memorandum form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

form This memorandum summarizes salient inputs to the CRA locational price forecasting model (GE MAPS). The model geographic footprint encompasses the US portion of the...

Note: This page contains sample records for the topic "form parts iv-vii" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Magnesium: Digital Resource Center - ARTICLE: Forming of ...  

Science Conference Proceedings (OSTI)

Sep 20, 2007 ... This paper addresses the formability of magnesium extrusions with respect to rotary-draw bending and hydro-mechanical forming, presenting...

342

Sample Forms | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Sample Forms | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our...

343

Form W-8BEN (Rev. February 2006)  

NLE Websites -- All DOE Office Websites (Extended Search)

Form W-8BEN (Rev. February 2006) Department of the Treasury Internal Revenue Service Certificate of Foreign Status of Beneficial Owner for United States Tax Withholding See...

344

Nucleon Form Factor Measurements and Interpretation  

SciTech Connect

The data base for the form factors of the nucleon obtained from elastic ep scattering is discussed, as well as some recent developments in their calculation.

Charles F. Perdrisat

2007-08-22T23:59:59.000Z

345

Employee Assistance Self-ID Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Request for Assistance During an Emergency Employee Self Identification This form is to be used by persons who expect that they will need assistance during an emergency. The...

346

Using partial sensor information to orient parts  

SciTech Connect

Parts orienting, the process of bringing parts in initially unknown orientations to a goal orientation, is an important aspect of automated assembly. The most common industrial orienting systems are vibratory bowl feeders, which use the shape and mass properties of parts to orient them. Bowl feeders rely on a sequence of mechanical operations and typically do not use sensors. In this paper, the authors describe the use of partial information sensors along with a sequence of pushing operations to eliminate uncertainty in the orientation of parts. The authors characterize the shorter execution lengths of sensor-based plans and show that sensor-based plans are more powerful than sensorless plans in that they can bring a larger class of parts to distinct orientations. The authors characterize the relation among part shape, orientability; and recognizability to identify conditions under which a single plan can orient and recognize multiple part shapes. Although part shape determines the results of the actions and the sensed information, the authors establish that differences in part shape do not always lead to differences in part behavior. The authors show that for any convex polygon, there exists an infinite set of nonsimilar convex polygons that behave identically under linear normal pushes. Furthermore, there exists a infinite set of nonsimilar convex polygons whose behavior cannot be distinguished even with diameter sensing after each push. They authors have implemented several planners and demonstrated generated plans in experiments.

Akella, S.; Mason, M.T.

1999-10-01T23:59:59.000Z

347

Short communication: Reasoning with part-part relations in a description logic  

Science Conference Proceedings (OSTI)

In this paper, we propose an extension of the SROIQ description logic (DL) in order to support part-part relations among concepts in knowledge representation. The proposed extension introduces a conjunction of a pair of role inclusion axioms (RIAs) and ... Keywords: Description logic, Manufacturing, Ontology, Part-part relation, Tableau algorithm

Nenad Krdavac; Dragan Gaevi?

2011-03-01T23:59:59.000Z

348

Jet acollinearity and quark form factors  

Science Conference Proceedings (OSTI)

Perturbative Quantum Chromodynamic corrections involving the emission of gluons which are both soft and collinear are discussed for both hadronic production of lepton pairs and e/sup +/e/sup -/ annihilation. The result is an exponential, double logarithmic quark form factor. The effect of sub-leading corrections and the possible experimental observation of the form factor are discussed.

Stirling, W.J.

1980-01-01T23:59:59.000Z

349

This form is used to activate claim  

E-Print Network (OSTI)

. IMPORTANT: Claim reimbursements can only be paid from the TIAA-CREF Money Market Mutual Fund. You may need. 4. Fax your completed form to 800 914-8922, or mail the form to: TIAA-CREF P.O. Box 1259 Charlotte

350

Metered Mail Form Domestic Mail Only  

E-Print Network (OSTI)

Metered Mail Form Domestic Mail Only For USPS Mail Only Charge to Department First Class Mail Media Meter Form. · All outgoing USPS Mail that needs postage should be kept separate from all other mail already be sealed prior to being metered. Failure to properly seal this type of mail could result

Palmeri, Thomas

351

DOE Emergency Exercise Feedback Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE Emergency Exercise Feedback Form DOE Emergency Exercise Feedback Form Emergency Exercise Feedback Form DOE Emergency Exercise Feedback Form More Documents & Publications...

352

On Line Beamline Commissioning Activity Approval Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Commissioning Activity Approval Form Commissioning Activity Approval Form This form is to be filled by the Commissioning Activity Team Leader. No beamline commissioning activities will be allowed to run without a properly completed, approved, and posting of this commissioning approval form. You will be notified by e-mail upon approval. Sector Beamline Expected Start Date Expected Duration 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 BM ID ( Give a Unit) Activity Description( Give only a brief description) Commissioning Team Members First and Last Name Affiliation Phone Number 1. 2. 3. 4. 5. 6. Special Safety Concerns Commissioning Activity Team Leader Name E-Mail Address Submit Commissioning Activity Approval Form Clear all Fields and start All over again!!!

353

Form W-8BEN (Rev. February 2006)  

NLE Websites -- All DOE Office Websites (Extended Search)

Form Form W-8BEN (Rev. February 2006) Department of the Treasury Internal Revenue Service Certificate of Foreign Status of Beneficial Owner for United States Tax Withholding ᮣ See separate instructions. ᮣ Give this form to the withholding agent or payer. Do not send to the IRS. OMB No. 1545-1621 Do not use this form for: Instead, use Form: ● A foreign partnership, a foreign simple trust, or a foreign grantor trust (see instructions for exceptions) W-8ECI or W-8IMY ● A foreign government, international organization, foreign central bank of issue, foreign tax-exempt organization, foreign private foundation, or government of a U.S. possession that received effectively connected income or that is claiming the applicability of section(s) 115(2), 501(c), 892, 895, or 1443(b) (see instructions)

354

Qualifying radioactive waste forms for geologic disposal  

SciTech Connect

We have developed a phased strategy that defines specific program-management activities and critical documentation for producing radioactive waste forms, from pyrochemical processing of spent nuclear fuel, that will be acceptable for geologic disposal by the US Department of Energy. The documentation of these waste forms begins with the decision to develop the pyroprocessing technology for spent fuel conditioning and ends with production of the last waste form for disposal. The need for this strategy is underscored by the fact that existing written guidance for establishing the acceptability for disposal of radioactive waste is largely limited to borosilicate glass forms generated from the treatment of aqueous reprocessing wastes. The existing guidance documents do not provide specific requirements and criteria for nonstandard waste forms such as those generated from pyrochemical processing operations.

Jardine, L.J. [Lawrence Livermore National Lab., CA (United States); Laidler, J.J.; McPheeters, C.C. [Argonne National Lab., IL (United States)

1994-09-01T23:59:59.000Z

355

Miscellaneous Forms | Y-12 National Security Complex  

NLE Websites -- All DOE Office Websites (Extended Search)

Miscellaneous Forms Miscellaneous Forms Miscellaneous Forms The following miscellaneous forms are provided in PDF fillable and/or Word format. Click the link in the "Format" column to open a copy of the form or right-click to download. Number* Title/Description Format** SF-85 Questionnaire for Non-Sensitive Positions PDF-fil UCN-13A Relocation Expense Report PDF-fil, PDF print UCN-15436 Gifts and Grants Request PDF-fil, Word UCN-16708 Request for Authorization to Ship SNM or Non-SNM Material (U) Word UCN-16790A Approval of Product Returned for Accountable Material and Non-Accountable Weapons Material (U) PDF print UCN-20650 Statement of Interest in Maintaining Section 3161 Employment Eligibility PDF-fil UCN-20904 Supplier Qualification Questionnaire Word

356

Transilient Turbulence Theory. Part II: Turbulent Adjustment  

Science Conference Proceedings (OSTI)

Turbulent adjustment is a scheme where dynamic instabilities in the flow are eliminated by turbulence. It is a form of first-order turbulence closure that is applicable to numerical forecast models of the atmosphere. The responsive form of ...

Roland B. Stull; Takehiko Hasegawa

1984-12-01T23:59:59.000Z

357

Part B - Requirements & Funding Information  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

B - Requirements & Funding Information B - Requirements & Funding Information PART B - Requirements & Funding Information .......................................................................................... 2 PART B - Requirements & Funding Information B.1. Purpose This Part of the IA (hereinafter 'Part B') serves as the funding document. It provides specific information on the requirements of the Department of Energy, hereinafter 'the Requesting Agency' sufficient to demonstrate a bona fide need and identifies funds associated with the requirement to allow [insert the name of agency/organization that will provide acquisition services for the Department of Energy], hereinafter 'the Servicing Agency,' to provide acquisition assistance and conduct an interagency acquisition.

358

Memorandum Memorializing Ex Parte Communication - August 12,...  

NLE Websites -- All DOE Office Websites (Extended Search)

Memorandum Memorializing Ex Parte Communication - August 12, 2011 On August 9, 2011, the Air-Conditioning, Heating and Refrigeration Institute's (AHRI) Unitary Small Engineering...

359

Ex parte memorandum | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

meeting with Small Business Refiners about DOE's planned survey to revise its "Small Refineries Exemption Study" of January 2009. Ex parte memorandum More Documents & Publications...

360

Gravity Wave Fine Structure Interactions, Part 1: Influences of Fine-Structure Form and Orientation on Flow Evolution and Instability  

Science Conference Proceedings (OSTI)

Four idealized direct numerical simulations are performed to examine the dynamics arising from the superposition of a monochromatic gravity wave and sinusoidal linear and rotary fine structure in the velocity field. These simulations are motivated ...

David C. Fritts; Ling Wang; Joseph A. Werne

Note: This page contains sample records for the topic "form parts iv-vii" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Copyright! 2010!No!part!of!this!presentation!may!be! reproduced!in!any!form!without!prior!authorization.  

E-Print Network (OSTI)

!our!addiction!to!oil!by!transforming! transportation ­ Electrify!Transportation:!Plug"In!Hybrid!Electric!Vehicles ­ Develop!and!Use!Alternative!Transportation!prior!authorization. Enable the Future Integrate microgrids, diverse generation and storage resources into a smart self!our!addiction!to!oil!by!transforming! transportation ­ Electrify!Transportation:!Plug"In!Hybrid! Electric!Vehicles ­ Develop!and!Use!Alternative!Transportation

Amin, S. Massoud

362

Copyright! 2010!No!part!of!this!presentation!may!be! reproduced!in!any!form!without!prior!authorization.  

E-Print Network (OSTI)

!Power!Research!Institute!(EPRI),!and!support!from!EPRI,!NSF,! and!ORNL!for!my!graduate!students' doctoral!research!is!gratefully!acknowledged. Canada"U.S.!Workshop!on!Smart!Grid!prior!authorization. Smart!Grid:!Tsunami!of!Data!Developing New!devices!in!the!home enabled!by!the!smart!meter You!prior!authorization. "Smart!Grid" Components!&!Devices Google!Power!Meter Smart!Meters Source:!IBM!Smart!Grid! Secure!Smart!Grids

Amin, S. Massoud

363

Copyright! 2010!No!part!of!this!presentation!may!be! reproduced!in!any!form!without!prior!authorization.  

E-Print Network (OSTI)

activity in Smart Grid. iii. Architecture ­ the architectures of smart grid from both the consumersWorkforce Development - Meeting the Educational Challenge of the Smart Sustainable Grid Future Grid the Educational Challenge of the Smart Sustainable Grid Project Team Chanan Singh, Mladen Kezunovic Texas A

Amin, S. Massoud

364

The proton form factor ratio results from Jefferson Lab  

Science Conference Proceedings (OSTI)

The ratio of the proton form factors, GE p/GMp, has been measured extensively, from Q2 of 0.5 GeV2 to 8.5 GeV2, at the Jefferson Laboratory, using the polarization transfer method. This ratio is extracted directly from the measured ratio of the transverse and longitudinal polarization components of the recoiling proton in elastic electron-proton scattering. The polarization transfer results are of unprecedented high precision and accuracy, due in large part to the small systematic uncertainties associated with the experimental technique. There is an approved experiment at JLab, GEP(5), to continue the ratio measurements to 12 GeV2. A dedicated experimental setup, the Super Bigbite Spectrometer (SBS), will be built for this purpose. It will be equipped with a focal plane polarimeter to measure the polarization of the recoil protons. The scattered electrons will be detected in an electromagnetic calorimeter. In this presentation, I will review the status of the proton elastic electromagnetic form factors and discuss a number of theoretical approaches to describe nucleon form factors.

Vina Punjabi

2012-09-01T23:59:59.000Z

365

$sup 238$Pu fuel form activities  

SciTech Connect

This report for STYPu Fuel Form Activities has one main section: SRP-PuFF Facility. The SRL portion of this program has been completed. The program status, budget information, and milestone schedules are discussed. The SRP portion of this report summarizes production of STYPuO2 fuel forms for use in radioisotopic thermoelectric generators (RTG's) in the Plutonium Fuel Form (Puff) Facility at the Savannah River Plant. The PuFF Facility has been placed in a production readiness mode of operation pending funding of additional heat source programs.

1987-06-01T23:59:59.000Z

366

Plasma formed ion beam projection lithography system  

DOE Patents (OSTI)

A plasma-formed ion-beam projection lithography (IPL) system eliminates the acceleration stage between the ion source and stencil mask of a conventional IPL system. Instead a much thicker mask is used as a beam forming or extraction electrode, positioned next to the plasma in the ion source. Thus the entire beam forming electrode or mask is illuminated uniformly with the source plasma. The extracted beam passes through an acceleration and reduction stage onto the resist coated wafer. Low energy ions, about 30 eV, pass through the mask, minimizing heating, scattering, and sputtering.

Leung, Ka-Ngo (Hercules, CA); Lee, Yung-Hee Yvette (Berkeley, CA); Ngo, Vinh (San Jose, CA); Zahir, Nastaran (Greenbrae, CA)

2002-01-01T23:59:59.000Z

367

Methods of forming semiconductor devices and devices formed using such methods  

SciTech Connect

Single source precursors are subjected to carbon dioxide to form particles of material. The carbon dioxide may be in a supercritical state. Single source precursors also may be subjected to supercritical fluids other than supercritical carbon dioxide to form particles of material. The methods may be used to form nanoparticles. In some embodiments, the methods are used to form chalcopyrite materials. Devices such as, for example, semiconductor devices may be fabricated that include such particles. Methods of forming semiconductor devices include subjecting single source precursors to carbon dioxide to form particles of semiconductor material, and establishing electrical contact between the particles and an electrode.

Fox, Robert V; Rodriguez, Rene G; Pak, Joshua

2013-05-21T23:59:59.000Z

368

Applications of P/M Structural Parts  

Science Conference Proceedings (OSTI)

Table 16   Automotive applications for P/M parts...Exhaust flanges EGR base plate HEGOS bosses HVAC Air conditioner compressor clutch hub Air conditioner compressor swash plate Interior fittings Lock parts (striking plate/latch) Rearview mirror mounts Pinion gears (door windows) Seat safety belt locks Speedometer gear Airbag hardware Seat...

369

enter part number BNC / RP-BNC  

E-Print Network (OSTI)

enter part number Products 7/16 1.0/2.3 1.6/5.6 AFI AMC BNC / RP-BNC C FAKRA SMB FME HN MCX Mini ------- Product Search ------- Inventory Search Search Results for: 31-10152-RFX Results: 1 - 1 of 1 Part Number. All rights reserved. Copyright | Terms & Conditions | RF E-Mail Client | Contact Us | Amphenol

Berns, Hans-Gerd

370

IUPAC-NIST Solubility Data Series. 95. Alkaline Earth Carbonates in Aqueous Systems. Part 2. Ca  

Science Conference Proceedings (OSTI)

The alkaline earth carbonates are an important class of minerals. This article is part of a volume in the IUPAC-NIST Solubility Data Series that compiles and critically evaluates solubility data of the alkaline earth carbonates in water and in simple aqueous electrolyte solutions. Part 1 outlined the procedure adopted in this volume, and presented the beryllium and magnesium carbonates. Part 2, the current paper, compiles and critically evaluates the solubility data of calcium carbonate. The chemical forms included are the anhydrous CaCO{sub 3} types calcite, aragonite, and vaterite, the monohydrate monohydrocalcite (CaCO{sub 3}{center_dot} H{sub 2}O), the hexahydrate ikaite (CaCO{sub 3}{center_dot}6H{sub 2}O), and an amorphous form. The data were analyzed with two model variants, and thermodynamic data of each form consistent with each of the models and with the CODATA key values for thermodynamics are presented.

De Visscher, Alex; Vanderdeelen, Jan [Department of Chemical and Petroleum Engineering, and Centre for Environmental Engineering Research and Education (CEERE), Schulich School of Engineering, University of Calgary, Calgary, Alberta, T2N 1N4 (Canada); Department of Applied Analytical and Physical Chemistry, Faculty of Bioscience Engineering, Ghent University, B-9000 Ghent (Belgium)

2012-06-15T23:59:59.000Z

371

UL Ex Parte communications | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

UL Ex Parte communications UL Ex Parte communications UL Ex Parte communications On December 27, I was contacted by Ms. Ashley Armstrong, U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Building Technologies Program and asked if I would be willing to meet with her and certain US DOE staff to discuss UL's "different testing and certification offerings as they relate to electric motors". Ex parte comm_1_7_2013.pdf More Documents & Publications EERE-2010-BT-STD-0027 Ex Parte Letter NEMA Motor Training re DOE Motors Rule 15 July 2013. Docket No. EERE-2010-BT-STD-0027 Energy Conservation Standards for Commercial and Industrial Electric Motors: Public Meeting and Availability of the Preliminary Technical Support Document 77 Fed. Reg. 43015 (July 23,

372

Property:PartOf | Open Energy Information  

Open Energy Info (EERE)

PartOf PartOf Jump to: navigation, search Property Name PartOf Property Type Page Description Similar to Property:TypeOf, this property identifies pages that represent a larger concept that encompasses the subject page. This is most commonly used in geospatial relationships, to say that a city is PartOf a state. This is a property of type Page. Subproperties This property has the following 2 subproperties: G GRR/Section 4-FD-a - Exploration Permit BLM N User:Nlangle/test3 Pages using the property "PartOf" Showing 25 pages using this property. (previous 25) (next 25) 2 2-M Probe Survey + Glossary + A Aaronsburg, Pennsylvania + Centre County, Pennsylvania +, Pennsylvania + Abbeville County, South Carolina + South Carolina + Abbeville, Alabama + Henry County, Alabama +, Alabama +, Alabama's 2nd congressional district +

373

Memorandum Memorializing Ex Parte Communication, DOE impending  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Memorandum Memorializing Ex Parte Communication, DOE impending Memorandum Memorializing Ex Parte Communication, DOE impending determination of coverage for commercial and industrial fans, blowers, and fume hoods. Memorandum Memorializing Ex Parte Communication, DOE impending determination of coverage for commercial and industrial fans, blowers, and fume hoods. The meeting was requested by AMCA International to introduce the association's leadership, standards, and experience in developing fan standards to DOE; to learn more about the DOE process for developing regulations for fan efficiency standards; and to inform DOE on how commercial and industrial fan markets work. AMCA_Ex_Parte.pdf More Documents & Publications DOE-STD-1168-2013 DOE Meeting Memorandum: Ex Parte Communications Independent Oversight Review, Savannah River Site - August 2011

374

UL Ex Parte communications | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

UL Ex Parte communications UL Ex Parte communications UL Ex Parte communications On December 27, I was contacted by Ms. Ashley Armstrong, U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Building Technologies Program and asked if I would be willing to meet with her and certain US DOE staff to discuss UL's "different testing and certification offerings as they relate to electric motors". Ex parte comm_1_7_2013.pdf More Documents & Publications EERE-2010-BT-STD-0027 Ex Parte Letter NEMA Motor Training re DOE Motors Rule 15 July 2013. Docket No. EERE-2010-BT-STD-0027 Energy Conservation Standards for Commercial and Industrial Electric Motors: Public Meeting and Availability of the Preliminary Technical Support Document 77 Fed. Reg. 43015 (July 23,

375

Form:Reference | Open Energy Information  

Open Energy Info (EERE)

Form Form Edit History Facebook icon Twitter icon » Form:Reference Jump to: navigation, search Input the title of a Reference below. If the reference already exists, you will be able to edit its information. Add/Edit Reference The text entered into this field will be used as the name of the reference; for example, the title of a book or name of the journal article. Example references Claritas Rise, Mars- Pre-Tharsis Magmatism? An Improved Equilibrium-Kinetics Speciation Algorithm For Redox Reactions In Variably Saturated Subsurface Flow Systems True-Temperature Determination Of Geothermal Reservoirs ... further results This form and reference requirements are based on the Council of Science Editors (CSE) (author-date) citation style. For more details about this

376

Form Approval: OMB No. 1905-0129  

U.S. Energy Information Administration (EIA) Indexed Site

Due Date: 2013 Due Date: 2013 Form Approval: OMB No. 1905-0129 Approval Expires: 12/31/2015 Burden hours: 0.75 SCHEDULE 1. IDENTIFICATION Contact Information Form EIA-861S ANNUAL ELECTRIC POWER INDUSTRY REPORT (Short Form) NOTICE: This report is mandatory under the Federal Energy Administration Act of 1974 (Public Law 93-275). Failure to comply may result in criminal fines, civil penalties and other sanctions as provided by law. For further information concerning sanctions and data protections see the provisions on sanctions and the provisions concerning the confidentiality of information in the instructions. Title 18 U.S.C. 1001 makes it a criminal offense for any person knowingly and willingly to make to any Agency or Department of the United States any false, fictitious, or fraudulent statements as to any matter within its jurisdiction. Entities that report using the Form EIA-861 do

377

Precipitation in Spray-Formed IN 718  

Science Conference Proceedings (OSTI)

Treatment of the spray formed alloy at 1025 and 1010C led to no 6 phase in the microstructure .... partial funding of this work. References. 1. E.E. Brown and...

378

Iterated Differential Forms II: Riemannian Geometry Revisited  

E-Print Network (OSTI)

A natural extension of Riemannian geometry to a much wider context is presented on the basis of the iterated differential form formalism developed in math.DG/0605113 and an application to general relativity is given.

A. M. Vinogradov; L. Vitagliano

2006-09-11T23:59:59.000Z

379

The NERSC Allocation Request Form (ERCAP)  

NLE Websites -- All DOE Office Websites (Extended Search)

NIM (NERSC Information Management portal) NIM (NERSC Information Management portal) Awarded projects Policies Data Analytics & Visualization Data Management Policies Science Gateways User Surveys NERSC Users Group User Announcements Help Operations for: Passwords & Off-Hours Status 1-800-66-NERSC, option 1 or 510-486-6821 Account Support https://nim.nersc.gov accounts@nersc.gov 1-800-66-NERSC, option 2 or 510-486-8612 Consulting http://help.nersc.gov consult@nersc.gov 1-800-66-NERSC, option 3 or 510-486-8611 How to Submit a 2014 ERCAP Request Home » For Users » Accounts & Allocations » Allocations » Allocation Request Form (ERCAP) Show All | 1 2 3 4 5 ... 16 | Next » The NERSC Allocation Request Form (ERCAP) Requests to use NERSC resources are submitted annually via a web form known as the ERCAP (Energy Research Computing Allocations Process) Request Form.

380

Benefits Forms and Information | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

New Employee Orientation » Benefits Forms and New Employee Orientation » Benefits Forms and Information Benefits Forms and Information As a Federal employee, you may have the opportunity to participate in a number of employee benefit and family-friendly programs. If your appointment to Federal employment confers eligibility, you may elect to participate in health, dental, and life insurance programs; retirement savings plans; flexible spending accounts; long-term care insurance; and vacation and sick leave. In addition, there are a number of family-friendly programs that the Department of Energy (DOE) offers its employees, such as alternative work schedules, flexiplace/telecommuting, transit subsidy, child development centers, and exercise and wellness facilities. The employment forms found in this section collect important and necessary

Note: This page contains sample records for the topic "form parts iv-vii" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

DUF6 Final EIS Document Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

EIS Request Form EIS Request Form Final EIS Document Request Form Use the form below to order copies of the DUF6 Conversion Facility Final EISs and Records of Decision. Step 3 Select the EIS that you want to receive. Select one of the three options below. My request applies to the Paducah Conversion Facility EIS My request applies to the Portsmouth Conversion Facility EIS My request applies to both the Paducah and the Portsmouth Conversion Facility EISs Step 1 Request EIS copies. Choose one or more of the following: Mail me a compact disc (CD-ROM) of the Final EIS and Record of Decision. Mail me a printed copy of the Final EIS and Record of Decision. Step 2 Enter your personal information. You must submit your full name and complete address including zip code to receive postal mail. You must provide an email address if you want to receive email notifications.

382

EOTA - Business Form Document Title: Nonconformance Report  

NLE Websites -- All DOE Office Websites (Extended Search)

5 Nonconformance Report 07_1206.doc 07_1206 Page 1 of 3 5 Nonconformance Report 07_1206.doc 07_1206 Page 1 of 3 EOTA - Business Form Document Title: Nonconformance Report Document Number: F-015 Rev. 07_12-06 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: P-011, Nonconforming Material / Product Process Notify of Changes: EOTA Employees Referenced Document(s): N/A F-015 Nonconformance Report 07_1206.doc 07_1206 Page 2 of 3 Revision History: Rev. Description of Change A Initial Release 07_1206 Converted form F-015 to a Word Form. Changed layout of form. No content changes were done. C D E F-015 Nonconformance Report 07_1206.doc 07_1206 Page 1 of 1 Nonconformance Report (NCR) General Information NCR # -

383

Form:Policy Organization | Open Energy Information  

Open Energy Info (EERE)

Add a Policy Organization Input your policy organization name below to add to the registry. If your policy organization is already in the registry, the form will be populated with...

384

FFSE/ISTA Online Membership Form  

NLE Websites -- All DOE Office Websites (Extended Search)

the tab key to go between text boxes; the keystrokes,"Return" and "Enter," have been disabled to avoid submitting the form prematurely. If you have questions about the membership...

385

Front contact solar cell with formed emitter  

SciTech Connect

A bipolar solar cell includes a backside junction formed by an N-type silicon substrate and a P-type polysilicon emitter formed on the backside of the solar cell. An antireflection layer may be formed on a textured front surface of the silicon substrate. A negative polarity metal contact on the front side of the solar cell makes an electrical connection to the substrate, while a positive polarity metal contact on the backside of the solar cell makes an electrical connection to the polysilicon emitter. An external electrical circuit may be connected to the negative and positive metal contacts to be powered by the solar cell. The positive polarity metal contact may form an infrared reflecting layer with an underlying dielectric layer for increased solar radiation collection.

Cousins, Peter John (Menlo Park, CA)

2012-07-17T23:59:59.000Z

386

Assessment of Preferred Depleted Uranium Disposal Forms  

SciTech Connect

The Department of Energy (DOE) is in the process of converting about 700,000 metric tons (MT) of depleted uranium hexafluoride (DUF6) containing 475,000 MT of depleted uranium (DU) to a stable form more suitable for long-term storage or disposal. Potential conversion forms include the tetrafluoride (DUF4), oxide (DUO2 or DU3O8), or metal. If worthwhile beneficial uses cannot be found for the DU product form, it will be sent to an appropriate site for disposal. The DU products are considered to be low-level waste (LLW) under both DOE orders and Nuclear Regulatory Commission (NRC) regulations. The objective of this study was to assess the acceptability of the potential DU conversion products at potential LLW disposal sites to provide a basis for DOE decisions on the preferred DU product form and a path forward that will ensure reliable and efficient disposal.

Croff, A.G.; Hightower, J.R.; Lee, D.W.; Michaels, G.E.; Ranek, N.L.; Trabalka, J.R.

2000-06-01T23:59:59.000Z

387

Photochromic sculpture: volumetric color-forming pixels  

Science Conference Proceedings (OSTI)

In contrast to light-emitting displays like plasma display panels (PDPs) and liquid crystal displays (LCDs), color-forming displays like "E-Ink" which displays information by reflecting surrounding light are being actively researched as a technology ...

Tomoko Hashida; Yasuaki Kakehi; Takeshi Naemura

2011-08-01T23:59:59.000Z

388

A Note on the Jordan Canonical Form  

E-Print Network (OSTI)

A proof of the Jordan canonical form, suitable for a first course in linear algebra, is given. The proof includes the uniqueness of the number and sizes of the Jordan blocks.

Azad, H

2010-01-01T23:59:59.000Z

389

Rearrangement Phylogeny of Genomes in Contig Form  

Science Conference Proceedings (OSTI)

There has been a trend in increasing phylogenetic coverage for genome sequencing while decreasing the sequencing coverage for each genome. With lower coverage, there is an increasing number of genomes being published in contig form. Rearrangement algorithms, ...

Adriana Muoz; David Sankoff

2009-04-01T23:59:59.000Z

390

A Bakery : in search of appropriate form  

E-Print Network (OSTI)

During the process of designing a building there occurs the continuous task of finding the forms, materials and structure that are fit to the particular building or situation at hand. It is the intent to combine these ...

Kuzmic, Katri

1982-01-01T23:59:59.000Z

391

TMS Fall Meeting '99 Registration Form  

Science Conference Proceedings (OSTI)

Nov 4, 1999 ... Focusing on physical metallurgy and materials, the 1999 TMS Fall Meeting will ... Print out this form, complete it, and fax or mail it to the TMS...

392

DRAFT STAFF REPORT FORMS AND INSTRUCTIONS FOR  

E-Print Network (OSTI)

plans showing how demand for energy and annual peak load will be met by specific supply)............................................................. 20 Supply Form S-2: Energy Balance Table RESOURCE PLANS Prepared in Support of the 2013 Integrated Energy Policy Report

393

Microsoft Word - Reservation Form.doc  

Science Conference Proceedings (OSTI)

RESERVATION FORM / ????? ???????????? Date: April 02-06, 2013 / ????: 02-06 ?????? 2013 ?. Special Guest Room Rate for AOCS group / ??????????? ???? ??? ?????? (Group code G-PO58) King room, 230 Euro, including VAT (20%), inc

394

Perfect Implementation of Normal-Form Mechanisms  

E-Print Network (OSTI)

Privacy and trust affect our strategic thinking, yet they have not been precisely modeled in mechanism design. In settings of incomplete information, traditional implementations of a normal-form mechanism ---by disregarding ...

Izmalkov, Sergei

395

Dry lubricant films for aluminum forming.  

DOE Green Energy (OSTI)

During metal forming process, lubricants are crucial to prevent direct contact, adhesion, transfer and scuffing of workpiece materials and tools. Boric acid films can be firmly adhered to the clean aluminum surfaces by spraying their methanol solutions and provide extremely low friction coefficient (about 0.04). The cohesion strengths of the bonded films vary with the types of aluminum alloys (6061, 6111 and 5754). The sheet metal forming tests indicate that boric acid films and the combined films of boric acid and mineral oil can create larger strains than the commercial liquid and solid lubricants, showing that they possess excellent lubricities for aluminum forming. SEM analyses indicate that boric acid dry films separate the workpiece and die materials, and prevent their direct contact and preserve their surface qualities. Since boric acid is non-toxic and easily removed by water, it can be expected that boric acid films are environmentally friendly, cost effective and very efficient lubricants for sheet aluminum cold forming.

Wei, J.; Erdemir, A.; Fenske, G. R.

1999-03-30T23:59:59.000Z

396

Exergy analysis of incremental sheet forming  

E-Print Network (OSTI)

Research in the last 15 years has led to die-less incremental forming processes that are close to realization in an industrial setup. Whereas many studies have been carried out with the intention of investigating technical ...

Dittrich, M. A.

397

Electronic Forms & Pen Computers Improve Building Commissioning  

NLE Websites -- All DOE Office Websites (Extended Search)

Electronic Forms & Pen Computers Improve Building Commissioning Speaker(s): Rich Sydlowski Date: August 8, 2001 - 12:00pm Location: Bldg. 90 Seminar HostPoint of Contact:...

398

Innovative forming and fabrication technologies : new opportunities.  

Science Conference Proceedings (OSTI)

The advent of light metal alloys and advanced materials (polymer, composites, etc.) have brought the possibility of achieving important energy reductions into the full life cycle of these materials, especially in transportation applications. 1 These materials have gained acceptance in the aerospace industry but use of light metal alloys needs to gain wider acceptance in other commercial transportation areas. Among the main reasons for the relatively low use of these materials are the lack of manufacturability, insufficient mechanical properties, and increased material costs due to processing inefficiencies. Considering the enormous potential energy savings associated with the use of light metal alloys and advanced materials in transportation, there is a need to identify R&D opportunities in the fields of materials fabrication and forming aimed at developing materials with high specific mechanical properties combined with energy efficient processes and good manufacturability. This report presents a literature review of the most recent developments in the areas of fabrication and metal forming focusing principally on aluminum alloys. In the first section of the document, the different sheet manufacturing technologies including direct chill (DC) casting and rolling, spray forming, spray rolling, thin slab, and strip casting are reviewed. The second section of the document presents recent research on advanced forming processes. The various forming processes reviewed are: superplastic forming, electromagnetic forming, age forming, warm forming, hydroforming, and incremental forming. Optimization of conventional forming processes is also discussed. Potentially interesting light metal alloys for high structural efficiency including aluminum-scandium, aluminum-lithium, magnesium, titanium, and amorphous metal alloys are also reviewed. This section concludes with a discussion on alloy development for manufacturability. The third section of the document reviews the latest developments in fiber-reinforced composite materials. Emerging curing processes are presented along with a discussion on the possible developments in biocomposite materials. The fourth section presents recent developments in the fabrication of bulk nanomaterials and nanoparticles reinforced materials. Advanced joining technologies are presented in the fifth section. Future research is proposed in the last section.

Davis, B.; Hryn, J.; Energy Systems; Kingston Process Metallurgy, Inc.

2008-01-31T23:59:59.000Z

399

Method of forming a chemical composition  

DOE Patents (OSTI)

A method of forming a chemical composition such as a chemical hydride is described and which includes the steps of selecting a composition having chemical bonds and which is capable of forming a chemical hydride; providing a source of hydrogen; and exposing the selected composition to an amount of ionizing radiation to encourage the changing of the chemical bonds of the selected composition, and chemically reacting the selected composition with the source of hydrogen to facilitate the formation of a chemical hydride.

Bingham, Dennis N. (Idaho Falls, ID); Wilding, Bruce M. (Idaho Falls, ID); Klingler, Kerry M. (Idaho Falls, ID); Zollinger, William T. (Idaho Falls, ID); Wendt, Kraig M. (Idaho Falls, ID)

2007-10-09T23:59:59.000Z

400

SEPARATIONS AND WASTE FORMS CAMPAIGN IMPLEMENTATION PLAN  

SciTech Connect

This Separations and Waste Forms Campaign Implementation Plan provides summary level detail describing how the Campaign will achieve the objectives set-forth by the Fuel Cycle Reasearch and Development (FCRD) Program. This implementation plan will be maintained as a living document and will be updated as needed in response to changes or progress in separations and waste forms research and the FCRD Program priorities.

Vienna, John D.; Todd, Terry A.; Peterson, Mary E.

2012-11-26T23:59:59.000Z

Note: This page contains sample records for the topic "form parts iv-vii" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Method for forming cooperative binary ionic solids  

DOE Patents (OSTI)

A nanostructured molecular unit and method for forming is described where a cationic porphyrin having an ethanolic substituent species and a metal in the porphyrin cavity is combined with an anionic porphyrin having a sulfonate substituent species and a metal in the porphyrin cavity to form by self-assembly a nanostructured molecular unit with a morphology comprising four dendritic elements connected at a central node.

Shelnutt, John A.; Martin, Kathleen E.; Wang, Zhongchun; Medforth, Craig J.

2013-03-05T23:59:59.000Z

402

BERA Forms, Brookhaven Employees Recreation Association (BERA)  

NLE Websites -- All DOE Office Websites (Extended Search)

Forms Forms PDF Adobe Acrobat Reader is needed to view some files on this page. Get Reader | troubleshoot Request to serve Alcohol on-Site Form and Alcohol Policy (pdf) Guidelines to start a new BERA Club/Activity (pdf) Injury Report Form (pdf) Confirmation of Medical Insurance Receipt (pdf) BERA Club Activities - Insurance Information Weight Room or fitness activities: Any contractor or family member (this includes spouse/partner, adult children, guests/contractors) wishing to use the Weight Room MUST present a copy of their medical insurance card and initial a receipt that states they have insurance in place in order to participate in any fitness activities or the weight room. The Recreation Office (Bldg 400) will keep this receipt on file. BERA League Sports: BSA paid employees must fill out this BERA Sports Clearance Form* (pdf) and go through the clearance procedure with OMC @ 490 (not BERA Office). Once reviewed by OMC, the clearance form will be mailed to the player who must then furnish a copy to the captain in order to practice or play.

403

Process for forming transparent aerogel insulating arrays  

DOE Patents (OSTI)

An improved supercritical drying process for forming transparent silica aerogel arrays is described. The process is of the type utilizing the steps of hydrolyzing and condensing aloxides to form alcogels. A subsequent step removes the alcohol to form aerogels. The improvement includes the additional step, after alcogels are formed, of substituting a solvent, such as CO/sub 2/, for the alcohol in the alcogels, the solvent having a critical temperature less than the critical temperature of the alcohol. The resulting gels are dried at a supercritical temperature for the selected solvent, such as CO/sub 2/, to thereby provide a transparent aerogel array within a substantially reduced (days-to-hours) time period. The supercritical drying occurs at about 40/sup 0/C instead of at about 270/sup 0/C. The improved process provides increased yields of large scale, structurally sound arrays. The transparent aerogel array, formed in sheets or slabs, as made in accordance with the improved process, can replace the air gap within a double glazed window, for example, to provide a substantial reduction in heat transfer. The thus formed transparent aerogel arrays may also be utilized, for example, in windows of refrigerators and ovens, or in the walls and doors thereof or as the active material in detectors for analyzing high energy elementary particles or cosmic rays.

Tewari, P.H.; Hunt, A.J.

1985-09-04T23:59:59.000Z

404

Process for forming transparent aerogel insulating arrays  

DOE Patents (OSTI)

An improved supercritical drying process for forming transparent silica aerogel arrays is described. The process is of the type utilizing the steps of hydrolyzing and condensing aloxides to form alcogels. A subsequent step removes the alcohol to form aerogels. The improvement includes the additional step, after alcogels are formed, of substituting a solvent, such as CO.sub.2, for the alcohol in the alcogels, the solvent having a critical temperature less than the critical temperature of the alcohol. The resulting gels are dried at a supercritical temperature for the selected solvent, such as CO.sub.2, to thereby provide a transparent aerogel array within a substantially reduced (days-to-hours) time period. The supercritical drying occurs at about 40.degree. C. instead of at about 270.degree. C. The improved process provides increased yields of large scale, structurally sound arrays. The transparent aerogel array, formed in sheets or slabs, as made in accordance with the improved process, can replace the air gap within a double glazed window, for example, to provide a substantial reduction in heat transfer. The thus formed transparent aerogel arrays may also be utilized, for example, in windows of refrigerators and ovens, or in the walls and doors thereof or as the active material in detectors for analyzing high energy elementry particles or cosmic rays.

Tewari, Param H. (Milpitas, CA); Hunt, Arlon J. (Oakland, CA)

1986-01-01T23:59:59.000Z

405

Radionuclide Retention in Concrete Waste Forms  

Science Conference Proceedings (OSTI)

Assessing long-term performance of Category 3 waste cement grouts for radionuclide encasement requires knowledge of the radionuclide-cement interactions and mechanisms of retention (i.e., sorption or precipitation); the mechanism of contaminant release; the significance of contaminant release pathways; how waste form performance is affected by the full range of environmental conditions within the disposal facility; the process of waste form aging under conditions that are representative of processes occurring in response to changing environmental conditions within the disposal facility; the effect of waste form aging on chemical, physical, and radiological properties; and the associated impact on contaminant release. This knowledge will enable accurate prediction of radionuclide fate when the waste forms come in contact with groundwater. The information presented in the report provides data that 1) quantify radionuclide retention within concrete waste form materials similar to those used to encapsulate waste in the Low-Level Waste Burial Grounds (LLBG); 2) measure the effect of concrete waste form properties likely to influence radionuclide migration; and 3) quantify the stability of uranium-bearing solid phases of limited solubility in concrete.

Mattigod, Shas V.; Bovaird, Chase C.; Wellman, Dawn M.; Wood, Marcus I.

2010-09-30T23:59:59.000Z

406

Directory of Energy Data Collection Forms: Forms in use as of October 1996  

SciTech Connect

This is the twentieth edition of the Directory of Energy Collection Data Forms, an authoritative listing of selected public use forms currently used as basic energy information gathering tools by the Department of Energy.

NONE

1996-12-01T23:59:59.000Z

407

Method of forming metallic coatings on polymeric substrates and of forming graded polymeric coatings or films  

DOE Patents (OSTI)

The invention described herein relates to methods of forming graded polymeric coatings or films on a desired substrate and of forming metallic coatings on polymeric or other nonmetallic substrates. In particular, it relates to methods of forming such coatings or films by sorption and/or diffusion of metals into coatings or films of polymeric material deposited by conventional techniques on a desired substrate.

Liepins, R.

1981-03-11T23:59:59.000Z

408

Directory of Energy Data Collection Forms: Forms in use as of October 1993  

Science Conference Proceedings (OSTI)

This is the seventeenth edition of the Directory of Energy Data Collection forms, an authoritative listing of selected public use forms currently used as basic energy information gathering tools by the Department of Energy (DOE). Originally entitled EIA Data Collection forms, this directory provides an overview of DOE`s energy information collection programs for decisionmakers in Government and industry.

Not Available

1993-12-28T23:59:59.000Z

409

ICE Order Form Hands-On Science Kits Prices effective through June 30, 2012.  

E-Print Network (OSTI)

ICE Order Form Hands-On Science Kits Prices effective through June 30, 2012. ______ 99-001 DNA on Solid-State Model Kit purchases. ICE Photochromic T-shirt (colors change in sunlight) ______ 93 $_________ ______ 11-002 ICE Gift Certificate ___$25 ___$50 ___$75 ___$100 $_________ Replacement Parts, Manuals, Kit

Wisconsin at Madison, University of

410

ICE Order Form Hands-On Science Kits Prices effective through March 31, 2013.  

E-Print Network (OSTI)

ICE Order Form Hands-On Science Kits Prices effective through March 31, 2013. ______ 99-001 DNA Kit purchases. ICE Photochromic T-shirt (colors change in sunlight) ______ 93-002 Adult sizes ___S $_________ ______ 11-002 ICE Gift Certificate ___$25 ___$50 ___$75 ___$100 $_________ Replacement Parts, Manuals, Kit

Wisconsin at Madison, University of

411

ICE Order Form Hands-On Science Kits Prices effective through September 30, 2012.  

E-Print Network (OSTI)

ICE Order Form Hands-On Science Kits Prices effective through September 30, 2012. ______ 99 Kit purchases. ICE Photochromic T-shirt (colors change in sunlight) ______ 93-002 Adult sizes ___S $_________ ______ 11-002 ICE Gift Certificate ___$25 ___$50 ___$75 ___$100 $_________ Replacement Parts, Manuals, Kit

Wisconsin at Madison, University of

412

ICE Order Form Hands-On Science Kits Prices effective through June 30, 2012.  

E-Print Network (OSTI)

ICE Order Form Hands-On Science Kits Prices effective through June 30, 2012. ______ 99-001 DNA Kit purchases. ICE Photochromic T-shirt (colors change in sunlight) ______ 93-002 Adult sizes ___S $_________ ______ 11-002 ICE Gift Certificate ___$25 ___$50 ___$75 ___$100 $_________ Replacement Parts, Manuals, Kit

Sheridan, Jennifer

413

ICE Order Form Hands-On Science Kits Prices effective through December 31, 2011.  

E-Print Network (OSTI)

ICE Order Form Hands-On Science Kits Prices effective through December 31, 2011. ______ 99-001 DNA on Solid-State Model Kit purchases. ICE Photochromic T-shirt (colors change in sunlight) ______ 93 $_________ ______ 11-002 ICE Gift Certificate ___$25 ___$50 ___$75 ___$100 $_________ Replacement parts, manuals

Wisconsin at Madison, University of

414

Automatic rule-based assessment of e-government application forms  

Science Conference Proceedings (OSTI)

This paper describes our current progress in designing and developing an AI rule-based module that automatically assesses e-Government application forms based on local laws and regulations. The rule-based module is part of a larger AI knowledge management ... Keywords: automatic assessment, expert system, rule-based system

Andy Hon Wai Chun

2007-04-01T23:59:59.000Z

415

A Hybrid Forming System: Electrical-Assisted Double Side Incremental Forming (EADSIF) Process for Enhanced Formability and Geometrical Flexibility  

Science Conference Proceedings (OSTI)

The objectives of this project are to establish the scientific bases, engineering technologies and energy/emission impact of a novel dieless forming process, Double side Incremental Forming (DSIF), and to explore the effectiveness of its hybrid variation, Electrical-Assisted Double Side Incremental Forming (EADSIF), on increasing the formability of metallic sheets. The scope of this project includes: (1) the analysis of environmental performance of the proposed new process as compared to conventional sheet metal forming processes; (2) the experimental investigation of the process capabilities of DSIF and EADSIF via the self-designed and newly established lab-scale EADSIF equipment; (3) the development of the essential software in executing the new proposed process, i.e., the toolpath generation algorithms; and finally (4) the exploration of the electricity effect on material deformation. The major accomplishments, findings and conclusions obtained through this one and a half years exploratory project are: (1) The first industrial medium-size-scale DSIF machine using two hexapods, capable of handling a sheet area up to 675 mm x 675 mm, was successfully completed at Ford. (2) The lab-scale of the DSIF machine was designed, fabricated and assembled to form a workpiece up to 250 mm x 250 mm. (3) Parts with arbitrary freeform double-curvatures using the genetic, not geometric-specific tooling were successfully formed using both machines. (4) The methodology of the life cycle analysis of DSIF was developed and energy consumption was measured and compared to conventional forming processes. It was found that the DSIF process can achieve 40% to 90% saving when the number of parts produced is less than 50. Sensitivity analysis was performed and showed that even at very large number of produced parts (greater than 2000), incremental forming saves at least 5% of the energy used in conventional forming. (5) It was proposed to use the offset between the two universal tools in DSIF to actively create a squeezing effect on sheet metal and therefore, increase the geometric accuracy. The idea was confirmed through both experimental and numerical validations. (6) A novel toolpath strategy, i.e., the so-called In-to-out toolpath or accumulative toolpath, was proposed to further increase formability and geometric accuracy compared to the SPIF configuration. A dimensional form accuracy of 1 mm can be achieved using the new strategy. (7) The effect of electricity on magnesium alloy was experimentally investigated. It was found that the formability has a ridge with respect to the applied current density and pulse duration. This finding implies that there are multiple choices of process parameters that are workable depending on the desired microstructure. The above results demonstrated that DSIF/EADSIF is a promising forming technology that can create impacts in revolutionizing how the prototyping and small volume production of sheet metals will be fabricated, i.e., it can (1) eliminate the need of casting and machining of drawing dies; (2) tailor material utilization to function requirement therefore achieving a light weight product; (3) reduce the amount of sheet metal scraps; and (4) shorten the engineering and manufacturing time for sheet metal parts from the current 8 {approx} 25 weeks to less than 1 week after the technology is fully developed. DSIF/EADSIF can be implemented in aerospace, automotive and appliance industries, or be used for producing personalized and point-of-use products in medical industry. Our analysis has shown that once developed, verified and demonstrated, the implementation and growth of DSIF will increase U.S. manufacturing competitiveness, advance machine tool and software industries, and create opportunities for emerging clean energy and low-carbon economy with estimated energy savings of 11 TBtu and CO2 reduction of 1 million tons per year. The work has been disseminated into three (3) journal articles and two (2) provisional patent submissions. A new company has been spun off from this research group aiming to c

Jian Cao; Z. Cedric Xia; Timothy G. Gutowski; John Roth

2012-04-28T23:59:59.000Z

416

Spray forming lead strip. Final report  

SciTech Connect

A cooperative research project was conducted between the Idaho National Engineering Laboratory (INEL) and Johnson Controls, Inc. (JCI) to adapt the INEL spray forming process to produce near-net-shape lead alloy strip. The emphasis of the work was to spray form lead strip samples at INEL, using a variety of spray conditions, for characterization at JCI. An existing glove box apparatus was modified at INEL to spray form lead. The main spray forming components were housed inside the glove box. They included a spray nozzle, tundish (crucible), substrate assembly, gas heater and furnaces to heat the nozzle and tundish. To spray form metal strip, liquid metal was pressure-fed at a controlled rate through a series of circular orifices that span the width of the nozzle. There the metal contacted high velocity, high temperature inert gas (nitrogen) which atomized the molten material into fine droplets, entrained the droplets in a directed flow, and deposited them onto glass plates that were swept through the spray plume to form strip samples. In-flight convection cooling of the droplets followed by conduction and convection cooling at the substrate resulted in rapid solidification of the deposit. During operation, the inside of the glove box was purged with an inert gas to limit the effects of in-flight oxidation of the particles and spray-formed strips, as well as to protect personnel from exposure to airborne lead particulate. Remote controls were used to start/stop the spray and control the speed and position of the substrate. In addition, substrate samples were loaded into the substrate translator manually using the gloved side ports of the box. In this way, the glove box remained closed during a series of spray trials, and was opened only when loading the crucible with a lead charge or when removing lead strip samples for shipment to JCI.

McHugh, K.

1996-04-10T23:59:59.000Z

417

Ex Parte Meeting with DOE and Navigant Consulting on Battery...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Ex Parte Meeting with DOE and Navigant Consulting on Battery Charger Energy Ex Parte Meeting with DOE and Navigant Consulting on Battery Charger Energy Ex parte guidance for...

418

Method of forming aluminum oxynitride material and bodies formed by such methods  

DOE Patents (OSTI)

Methods of forming aluminum oxynitride (AlON) materials include sintering green bodies comprising aluminum orthophosphate or another sacrificial material therein. Such green bodies may comprise aluminum, oxygen, and nitrogen in addition to the aluminum orthophosphate. For example, the green bodies may include a mixture of aluminum oxide, aluminum nitride, and aluminum orthophosphate or another sacrificial material. Additional methods of forming aluminum oxynitride (AlON) materials include sintering a green body including a sacrificial material therein, using the sacrificial material to form pores in the green body during sintering, and infiltrating the pores formed in the green body with a liquid infiltrant during sintering. Bodies are formed using such methods.

Bakas, Michael P. (Ammon, ID); Lillo, Thomas M. (Idaho Falls, ID); Chu, Henry S. (Idaho Falls, ID)

2010-11-16T23:59:59.000Z

419

C:\Forms\DOE F 3220.5.cdr  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5 5 (8/86) (8/86) PREVIOUSLY AD-37 (All other editions are obsolete) PRIVACY ACT STATEMENT, Information about an individual called for on this form and which pertains to the individual's rights benefits and privileges may become part of a "System of Records" subject to the Privacy Act of 1974. That Act provides that information be collected directly from the individual to the greatest extent practicable, and that such records pertaining to him are subject to his access upon request. The purpose of the information is to provide the basis for DOE review and approval of contractor employee's compensation for reimbursement at the specified level under the contract. If information is inadequate or incomplete, action on the request may be delayed or withheld.

420

Transuranic contaminated waste form characterization and data base  

SciTech Connect

This report outlines the sources, quantities, characteristics and treatment of transuranic wastes in the United States. This document serves as part of the data base necessary to complete preparation and initiate implementation of transuranic wastes, waste forms, waste container and packaging standards and criteria suitable for inclusion in the present NRC waste management program. No attempt is made to evaluate or analyze the suitability of one technology over another. Indeed, by the nature of this report, there is little critical evaluation or analysis of technologies because such analysis is only appropriate when evaluating a particular application or transuranic waste streams. Due to fiscal restriction, the data base is developed from a myriad of technical sources and does not necessarily contain operating experience and the current status of all technologies. Such an effort was beyond the scope of this report.

McArthur, W.C.; Kniazewycz, B.G.

1980-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "form parts iv-vii" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Method of forming and starting a sodium sulfur battery  

SciTech Connect

A method of forming a sodium sulfur battery and of starting the reactive capability of that battery when heated to a temperature suitable for battery operation is disclosed. An anodic reaction zone is constructed in a manner that sodium is hermetically sealed therein, part of the hermetic seal including fusible material which closes up openings through the container of the anodic reaction zone. The hermetically sealed anodic reaction zone is assembled under normal atmospheric conditions with a suitable cathodic reaction zone and a cation-permeable barrier. When the entire battery is heated to an operational temperature, the fusible material of the hermetically sealed anodic reaction zone is fused, thereby allowing molten sodium to flow from the anodic reaction zone into reactive engagement with the cation-permeable barrier.

Paquette, David G. (Costa Mesa, CA)

1981-01-01T23:59:59.000Z

422

Recent INEL spray-forming developments  

SciTech Connect

Spray forming is a near-net-shape fabrication technology in which a spray of finely atomized liquid droplets is deposited onto a suitably shaped substrate or mold to produce a coherent solid. The technology offers unique opportunities for simplifying materials processing, oftentimes while substantially improving product quality. Spray forming can be performed with a wide range of metals and nonmetals, and offersproperty improvements resulting from rapid solidification (eg. refined microstructures, extended solid solubilities and reduced segregation). Economic benefits result from process simplification and the elimination of unit operations. Researchers at the Idaho National Engineering Laboratory (INEL) are developing spray-forming technology for producing near-net-shape solids and coatings of a variety of metals, polymers, and composite materials using de Laval nozzles. Results from several spray-forming programs are presented to illustrate the range of capabilities of the approach as well as the technical and economic benefits. These programs involved the production of low-carbon steel strip and SiC particulate reinforced aluminum strip; recent advances in spray forming tooling using low-melting-point metals are also described.

McHugh, K.M.; Key, J.F.

1992-01-01T23:59:59.000Z

423

Recent INEL spray-forming developments  

SciTech Connect

Spray forming is a near-net-shape fabrication technology in which a spray of finely atomized liquid droplets is deposited onto a suitably shaped substrate or mold to produce a coherent solid. The technology offers unique opportunities for simplifying materials processing, oftentimes while substantially improving product quality. Spray forming can be performed with a wide range of metals and nonmetals, and offersproperty improvements resulting from rapid solidification (eg. refined microstructures, extended solid solubilities and reduced segregation). Economic benefits result from process simplification and the elimination of unit operations. Researchers at the Idaho National Engineering Laboratory (INEL) are developing spray-forming technology for producing near-net-shape solids and coatings of a variety of metals, polymers, and composite materials using de Laval nozzles. Results from several spray-forming programs are presented to illustrate the range of capabilities of the approach as well as the technical and economic benefits. These programs involved the production of low-carbon steel strip and SiC particulate reinforced aluminum strip; recent advances in spray forming tooling using low-melting-point metals are also described.

McHugh, K.M.; Key, J.F.

1992-12-31T23:59:59.000Z

424

FORMED CORE SAMPLER HYDRAULIC CONDUCTIVITY TESTING  

SciTech Connect

A full-scale formed core sampler was designed and functionally tested for use in the Saltstone Disposal Facility (SDF). Savannah River National Laboratory (SRNL) was requested to compare properties of the formed core samples and core drilled samples taken from adjacent areas in the full-scale sampler. While several physical properties were evaluated, the primary property of interest was hydraulic conductivity. Differences in hydraulic conductivity between the samples from the formed core sampler and those representing the bulk material were noted with respect to the initial handling and storage of the samples. Due to testing conditions, the site port samples were exposed to uncontrolled temperature and humidity conditions prior to testing whereas the formed core samples were kept in sealed containers with minimal exposure to an uncontrolled environment prior to testing. Based on the results of the testing, no significant differences in porosity or density were found between the formed core samples and those representing the bulk material in the test stand.

Miller, D.; Reigel, M.

2012-09-25T23:59:59.000Z

425

Directory of energy data collection forms. Forms in use as of October 1995  

SciTech Connect

This is an authoritative listing of selected public use forms currently used as basic energy information gathering tools by the Department of Energy (DOE). This directory provides an overview of DOE`s energy information collection programs for decisionmakers in Government and industry. Forms designed to collect energy information and used by the Energy Information Administration (EIA) as of October 1995 are included in this directory. For each form listed in this directory, an abstract is included that describes the form`s uses, its respondents, and the data collected. For the reader`s convenience in finding specific types of collections, several indices have been provided in this directory. A listing of the forms grouped by energy source and function begins on page 26. Beginning on page 38 are the publications derived from the collections, and on page 50, are the forms linked to general respondent categories.

NONE

1996-01-01T23:59:59.000Z

426

Metal Silicides: An Integral Part of Microelectronics  

Science Conference Proceedings (OSTI)

Metal silicide thin films are integral parts of all microelectronics devices. .... with activation energy around 11.5 eV for refractory metal/silicon systems and 0.5 eV

427

Oilseeds of the future: Part 2  

Science Conference Proceedings (OSTI)

inform's examination of some of the trait-modified oilseeds currently in research and development pipelines around the world continues with this month's look at work in cottonseed, flax, and oil palm. Oilseeds of the future: Part 2 Oil

428

Geometric Mechanics -Part I January 13, 2009  

E-Print Network (OSTI)

Geometric Mechanics - Part I Bob Rink January 13, 2009 Contents 1 Mechanical systems 4 1.1 Two Lagrangian mechanics 9 2.1 New position variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-Lagrange equations . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 2.4 Natural mechanical systems

Hanssmann, Heinz

429

Geometric Mechanics -Part I January 23, 2009  

E-Print Network (OSTI)

Geometric Mechanics - Part I Bob Rink January 23, 2009 Contents 1 Mechanical systems 4 1.1 Two Lagrangian mechanics 9 2.1 New position variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-Lagrange equations . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 2.4 Natural mechanical systems

Rink, Bob

430

Car Parts Self-Assembled From  

E-Print Network (OSTI)

Car Parts Self-Assembled From DNA Next: Navigation Helmet Cr SoundTech, Clay Dillow, clean energy, desali desalinization, electricity production, micro cells, wastewater Not bad for a microbe Microbial fuel cell desalinates water while generating electricity: This microbial

431

Freeway Analysis Manual: Parts 1 and 2  

E-Print Network (OSTI)

BERKELEY Freeway Analysis Manual: Parts 1 and 2 Dolf May,AND 2 OF FREEWAY ANALYSIS MANUAL Prepared by Dolf May LannonThis Freeway Analysis Manual is intended for those who are

May, Dolf; Leiman, Lannon

2005-01-01T23:59:59.000Z

432

Equatorial Velocity Profiles. Part I: Meridional Component  

Science Conference Proceedings (OSTI)

A time series or vertical profiles of horizontal velocity was collected in the western equatorial Indian Ocean during late spring of 1976. The meridional velocity component is examined here, the zonal component in Part II of this paper. The ...

Kathleen O'Neill

1984-12-01T23:59:59.000Z

433

New Hailstone Physics. Part II: Results  

Science Conference Proceedings (OSTI)

In Part I the six variables for heat and mass transfer, HMT, of spherical hailstones are reduced to four without any approximations or loss of accuracy. This reduction of parameter dimensions is complemented by the volume reduction of the ...

Roland List

434

Coordinated part delivery using distributed planning  

E-Print Network (OSTI)

In this thesis, we develop a distributed mobile robot platform to deliver parts around a model construction site. The platform's robots, specialized into delivery robots and assembly robots, use a distributed coverage ...

Bolger, Adrienne (Adrienne M.)

2010-01-01T23:59:59.000Z

435

Forms & Applications | Stanford Synchrotron Radiation Lightsource  

NLE Websites -- All DOE Office Websites (Extended Search)

Forms & Applications Forms & Applications Forms: Before You Arrive User Information Log in to the User Portal to Register or Update Contact Informatioin Proposals Submit Proposals via User Portal (including Rapid Access and Letters of Intent) Proposal Extension Requests X-ray/VUV/SMB Macromolecular Crystallography (MC) User Agreements Non-Proprietary User Agreement Proprietary Research User Agreement Beam Time & Support Requests Log in to User Portal to Submit Beam Time or User Support Requests Computer Account X-ray/VUV/SMB Macromolecular Crystallography Use of SLAC Information Resources (submit with account request) User Financial Account User Financial Account Gas & Cryogenics Liquid Helium & Standard/Specialty Shipping & Receiving Hazardous Materials Shipper Non-Hazardous Materials Shipper

436

FAQs for Survey Forms 805 and 815  

Gasoline and Diesel Fuel Update (EIA)

Forms 805 and 815 Forms 805 and 815 On the EIA-815 survey, what should be reported in the "Fuel Uses & Losses During Month" column? The fuel use and loss column should only be used to report losses caused by spills, fires, contamination, and volumes used as fuel at a terminal. Data reported in these cells and all cells on the EIA-815 survey should always be positive. Do not use the fuel uses and losses column to correct line imbalances due to rounding. Line imbalances due to heat or pressure related variations, gauging problems, accounting adjustments and rounding that are less than or equal to 5 thousand barrels are acceptable. Line imbalances larger than 5 thousand barrels should be investigated for possible errors. EIA-805 Survey form & instructions Contact: Robert Merriam,

437

FAQs for Survey Forms 809 and 819  

Gasoline and Diesel Fuel Update (EIA)

9 and 819 9 and 819 EIA-809 (Weekly Oxygenate Report) How do I submit the form? There are four ways to submit the EIA-809 form. Secure File Transfer: https://signon.eia.doe.gov/upload/noticeoog.jsp The Secure File Transfer System uses the secure hypertext transfer protocol (HTTPS), an industry standard method to send information over the web using secure, encrypted processes. Electronic Filing Option: The PC Electronic Data Reporting Option (PEDRO) is a Windows-based application that will enable you to enter data interactively, import data from your own database, validate your data online, and transmit the encrypted data electronically to EIA via the Internet or a dial-up modem. To receive this free software call (202) 586-9659. Email: oog.surveys@eia.gov Fax forms to: (202) 586-1076

438

Security Forms and Information | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Services » New Employee Orientation » Security Forms and Services » New Employee Orientation » Security Forms and Information Security Forms and Information Homeland Security Presidential Directive HSPD-12 established new policy for a common identification standard for Federal Employees and contractors. As of October 27, 2005, all new Federal employees assigned to the DOE Headquarters complex are required to present two identity source documents (i.e., U.S. Passport, driver's license, identification card with photograph issued by a Federal, state, or local government agency, etc.), have their fingerprints taken, and undergo a background investigation (the identity proofing process) prior to reporting for duty or being issued a DOE standard badge (identity or PIV badge). Most likely, your HR representative and/or administrative personnel have

439

FAQs for Survey Form EIA-182  

Gasoline and Diesel Fuel Update (EIA)

FAQs for Survey Form EIA-182 FAQs for Survey Form EIA-182 What is the purpose of this survey? Form EIA-182, "Domestic Crude Oil First Purchase Report" is designed to collect data on both the average cost and volume associated with the physical and financial transfer of domestic crude oil off the property on which it was produced. The monthly reported data represent the initial market value and volume of domestic crude oil production. What are the published domestic crude oil first purchase prices? The domestic crude oil first purchase price is associated with only those companies that purchase crude oil the moment the oil leaves the lease on which it was produced. Companies are asked to report the average cost per barrel and total volume purchased for requested crude streams purchased in

440

STUDENT INTERN RELOCATION BENEFIT REQUEST FORM  

NLE Websites -- All DOE Office Websites (Extended Search)

01-RBR (8-2013) 01-RBR (8-2013) UCI (When Completed) UCI (When Completed) STUDENT INTERN RELOCATION BENEFIT REQUEST FORM Instructions for New Hire, Re-hire or Year-round Intern returning to Sandia work site from remote location: Review eligibility criteria below. If you believe that you may be eligible to receive relocation benefits from Sandia, complete and sign this form, then return to the CA or NM Student Intern Programs office. ELIGIBILITY CRITERIA Name: Phone: Email: School/Academic Residence Address Permanent Address Address 1 Address 2 City State Zip Code Student Acknowledgement: I certify that the information stated on this form is correct and complete to best of my knowledge. I

Note: This page contains sample records for the topic "form parts iv-vii" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

APS Visitor Registration Form | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

APS Visitor Registration Form APS Visitor Registration Form To request access as a visitor who will not do hands-on work, please complete this form. For assistance, contact the APS User Office by phone at (630) 252-9090 or by email at apsuser@aps.anl.gov. Please request access directly by contacting the APS User Office by phone at (630) 252-9090 or by email at apsuser@aps.anl.gov. If you are concerned about sending your passport and visa information, leave those fields blank and fax a letter to (630) 252-9250. To Request APS Visitor Registration, please enter the following: * indicates required field First Name*: Middle Initial/Name*: Last Name*: Title: Organization*: Department: Address 1*: Address 2: City*: State*: Zip Code*: Country: Phone*: Fax: E-mail Address*: Gender*: Female

442

FAQs for Survey Form EIA-14  

Gasoline and Diesel Fuel Update (EIA)

Form EIA-14 Form EIA-14 What is the purpose of this survey? Form EIA-14, "Refiners' Monthly Cost Report" is designed to collect summary data regarding crude oil prices by Petroleum Administration for Defense Districts (PADDs). The data are used to provide the government and the public monthly prices on refiner acquisition cost of crude oil. How are my data used to publish Refiner Acquisition Cost of Crude Oil? Your data, total cost and total volume, is combined with the data of other respondents. The sum of the costs for data from all of the respondents is divided by the sum of the volumes to calculate the Refiner Acquisition Cost (RAC) of crude oil. The composite RAC is the average cost of both domestic and imported crude oil. Where can I find the published data?

443

Mixed low-level waste form evaluation  

Science Conference Proceedings (OSTI)

A scoping level evaluation of polyethylene encapsulation and vitreous waste forms for safe storage of mixed low-level waste was performed. Maximum permissible radionuclide concentrations were estimated for 15 indicator radionuclides disposed of at the Hanford and Savannah River sites with respect to protection of the groundwater and inadvertent intruder pathways. Nominal performance improvements of polyethylene and glass waste forms relative to grout are reported. These improvements in maximum permissible radionuclide concentrations depend strongly on the radionuclide of concern and pathway. Recommendations for future research include improving the current understanding of the performance of polymer waste forms, particularly macroencapsulation. To provide context to these estimates, the concentrations of radionuclides in treated DOE waste should be compared with the results of this study to determine required performance.

Pohl, P.I.; Cheng, Wu-Ching; Wheeler, T.; Waters, R.D.

1997-03-01T23:59:59.000Z

444

Density of Spray-Formed Materials  

SciTech Connect

Spray Forming is an advanced materials processing technology that transforms molten metal into a near-net-shape solid by depositing atomized droplets onto a substrate. Depending on the application, the spray-formed material may be used in the as-deposited condition or it may undergo post-deposition processing. Regardless, the density of the as-deposited material is an important issue. Porosity is detrimental because it can significantly reduce strength, toughness, hardness and other properties. While it is not feasible to achieve fully-dense material in the as-deposited state, density greater than 99% of theoretical density is possible if the atomization and impact conditions are optimized. Thermal conditions at the deposit surface and droplet impact angle are key processing parameters that influence the density of the material. This paper examines the factors that contribute to porosity formation during spray forming and illustrates that very high as-deposited density is achieved by optimizing processing parameters.

Kevin M. McHugh; Volker Uhlenwinkel; Nils Ellendr

2008-06-01T23:59:59.000Z

445

Paramagnetic form factors from itinerant electron theory  

Science Conference Proceedings (OSTI)

Elastic neutron scattering experiments performed over the past two decades have provided accurate information about the magnetic form factors of paramagnetic transition metals. These measurements have traditionally been analyzed in terms of an atomic-like theory. There are, however, some cases where this procedure does not work, and there remains the overall conceptual problem of using an atomistic theory for systems where the unpaired-spin electrons are itinerant. We have recently developed computer codes for efficiently evaluating the induced magnetic form factors of fcc and bcc itinerant electron paramagnets. Results for the orbital and spin contributions have been obtained for Cr, Nb, V, Mo, Pd and Rh based on local density bands. By using calculated spin enhancement parameters, we find reasonable agreement between theory and neutron form factor data. In addition, these zero parameter calculations yield predictions for the bulk susceptibility on an absolute scale which are in reasonable agreement with experiment in all treated cases except palladium.

Cooke, J.F.; Liu, S.H.; Liu, A.J.

1984-09-01T23:59:59.000Z

446

Benchmarking boiler tube failures - Part 2  

Science Conference Proceedings (OSTI)

Part 1 of this article characterised the EUCG (formerly the Electric Utility Cost Group) Fossil Productivity Committee's study of 14 utilities with 219 baseload coal-fired steam plants (about 20% of the total number of coal plants in the USA) and their experience fighting tube leaks. Part 2 characterizes the sample of plants studied and summarises the data at the fleet level. The next study is scheduled for summer 2006. 3 figs., 2 tabs.

James Patrick; Robert Oldani; Daryl Von Behren [Ameren (United States)

2005-12-01T23:59:59.000Z

447

Atomization methods for forming magnet powders  

SciTech Connect

The invention encompasses methods of utilizing atomization, methods for forming magnet powders, methods for forming magnets, and methods for forming bonded magnets. The invention further encompasses methods for simulating atomization conditions. In one aspect, the invention includes an atomization method for forming a magnet powder comprising: a) forming a melt comprising R.sub.2.1 Q.sub.13.9 B.sub.1, Z and X, wherein R is a rare earth element; X is an element selected from the group consisting of carbon, nitrogen, oxygen and mixtures thereof; Q is an element selected from the group consisting of Fe, Co and mixtures thereof; and Z is an element selected from the group consisting of Ti, Zr, Hf and mixtures thereof; b) atomizing the melt to form generally spherical alloy powder granules having an internal structure comprising at least one of a substantially amorphous phase or a substantially nanocrystalline phase; and c) heat treating the alloy powder to increase an energy product of the alloy powder; after the heat treatment, the alloy powder comprising an energy product of at least 10 MGOe. In another aspect, the invention includes a magnet comprising R, Q, B, Z and X, wherein R is a rare earth element; X is an element selected from the group consisting of carbon, nitrogen, oxygen and mixtures thereof; Q is an element selected from the group consisting of Fe, Co and mixtures thereof; and Z is an element selected from the group consisting of Ti, Zr, Hf and mixtures thereof; the magnet comprising an internal structure comprising R.sub.2.1 Q.sub.13.9 B.sub.1.

Sellers, Charles H. (Idaho Falls, ID); Branagan, Daniel J. (Idaho Falls, ID); Hyde, Timothy A. (Idaho Falls, ID)

2000-01-01T23:59:59.000Z

448

Spray-formed tooling and aluminum strip  

SciTech Connect

Spray forming is an advanced materials processing technology that converts a bulk liquid metal to a near-net-shape solid by depositing atomized droplets onto a suitably shaped substrate. By combining rapid solidification processing with product shape control, spray forming can reduce manufacturing costs while improving product quality. De Laval nozzles offer an alternative method to the more conventional spray nozzle designs. Two applications are described: high-volume production of aluminum alloy strip, and the production of specialized tooling, such as injection molds and dies, for rapid prototyping.

McHugh, K.M.

1995-11-01T23:59:59.000Z

449

High temperature methods for forming oxidizer fuel  

DOE Patents (OSTI)

A method of treating a formation fluid includes providing formation fluid from a subsurface in situ heat treatment process. The formation fluid is separated to produce a liquid stream and a first gas stream. The first gas stream includes carbon dioxide, hydrogen sulfide, hydrocarbons, hydrogen or mixtures thereof. Molecular oxygen is separated from air to form a molecular oxygen stream comprising molecular oxygen. The first gas stream is combined with the molecular oxygen stream to form a combined stream comprising molecular oxygen and the first gas stream. The combined stream is provided to one or more downhole burners.

Bravo, Jose Luis (Houston, TX)

2011-01-11T23:59:59.000Z

450

How to Submit Forms: Exclusionary List: For the PC Electronic Data  

U.S. Energy Information Administration (EIA) Indexed Site

For the PC Electronic Data For the PC Electronic Data - DATE OF THIS REPORT: 1 3 Reseller/Retailer 2 4 Retailer 1 3 Sold or leased to another firm. See PART 3 of the instructions. 2 4 Permanently ceased operation. See PART 3 of the instructions. https://signon.eia.doe.gov/upload/noticeoog.jsp Reporting Option (PEDRO) software, call (202) 586- 9659. Mailing Address: City: OOG.SURVEYS@eia.doe.gov Email: Electronic Transmission: Physical Address: Fax No.: (e.g., Street Address, Bldg, Floor, Suite) (e.g., PO Box, RR) Original Mo Day Call: Year Questions? Type of Report (Check One ): Number of States for which you are reporting: Year Company Name: http://www.eia.gov/survey/form/eia_782a/list782a.pdf Instructions: http://www.eia.gov/survey/form/eia_782a/instructions.pdf FORM EIA-782A REFINERS'/GAS PLANT OPERATORS' MONTHLY PETROLEUM PRODUCT SALES REPORT

451

U.S. Department of Energy NEPA Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Select the appropriate categorical exclusion(s) from Appendix B to Subpart D of 10 CFR Part 1021 (for Appendix (A) use bottom two pull-down menus) Select the appropriate categorical exclusion(s) from Appendix B to Subpart D of 10 CFR Part 1021 (for Appendix (A) use bottom two pull-down menus) 1) Develop an energy efficiency and conservation strategy, 2) technical consultant to conduct an analysis of the potential for a biomass to energy project, 3) hire a Sustainability Coordinator, 4) create an enhanced residential curbside recycling program, 5) streetlight retrofits. The original forms were signed by Gary Hartman on behalf of EERE on 4/1/2010. The original CX determination form is attached. Oak Ridge Office EEC Strategy and Analysis, Retrofits and Recycling Program MI- City- Dearborn Print Form for Records Submit to Website Submit via Email X- A9 - Information gathering/data analysis/document preparation/dissemination

452

Southwestern Power Administration Categorical Exclusion Determination Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Associated Electric Cooperative, Inc. Substation Improvements Associated Electric Cooperative, Inc. Substation Improvements Program or Field Office: Southwestern Power Administration Location{s) (City/County/State): Springfield, Missouri, Greene County Proposed Action Description: Associated Electric Cooperative, Inc. proposes to install new underground conduit and cable in Southwestern Power Administrations' Springfield, Missouri electrical substation. Categorical ExciusionCs) Al'l'lied: 10 CFR 1021, Appendix B to Subpart D, Part B4.6- Additions and modifications to electric power transmission facilities within a previously disturbed or developed facility . For the complete DOE National Environmental Policy Act regulations regarding categorical exclusions, including the full text of each categorical exclusion, see Subpart D of 10 CFR Part 1021.

453

Southwestern Power Administration Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Associated Electric Cooperative, Inc. Substation Improvements Associated Electric Cooperative, Inc. Substation Improvements Program or Field Office: Southwestern Power Administration Location{s) (City/County/State): Springfield, Missouri, Greene County Proposed Action Description: Associated Electric Cooperative, Inc. proposes to install new underground conduit and cable in Southwestern Power Administrations' Springfield, Missouri electrical substation. Categorical ExciusionCs) Al'l'lied: 10 CFR 1021, Appendix B to Subpart D, Part B4.6- Additions and modifications to electric power transmission facilities within a previously disturbed or developed facility . For the complete DOE National Environmental Policy Act regulations regarding categorical exclusions, including the full text of each categorical exclusion, see Subpart D of 10 CFR Part 1021.

454

Annual Electric Utility Data - Form EIA-906 Database  

U.S. Energy Information Administration (EIA) Indexed Site

Detailed data files > Historic Form EIA-906 Historic Form EIA-906 Detailed Data with previous form data (EIA-759) Historic electric utility data files include information on net...

455

Document Certification and Transmittal Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Transmittal Form Document Certification and Transmittal Form Use this form to submit a NEPA document to the Office of NEPA Policy and Compliance for website posting....

456

DOE Emergency Special Needs Self-Identification Form | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Emergency Special Needs Self-Identification Form DOE Emergency Special Needs Self-Identification Form Emergency Special Needs Self-Identification Form DOE Emergency Special Needs...

457

New Species of Cyanobacteria Forms Intracellular Carbonates  

NLE Websites -- All DOE Office Websites (Extended Search)

New Species of Cyanobacteria Forms Intracellular Carbonates Print New Species of Cyanobacteria Forms Intracellular Carbonates Print A new species of cyanobacteria-photosynthetic bacteria that occupy a wide array of habitats-was discovered in the Mexican Lake of Alchichica where massive carbonate rocks form. Cyanobacteria have been impacting the global carbon cycle of the Earth for more than 2.3 billion years by assimilating CO2 into organic compounds and triggering calcium carbonate (CaCO3) precipitation. Despite the importance of this cyanobacteria-mediated CaCO3 biomineralization, the mechanistic details of this process are still poorly understood. Scientists agree that calcification in cyanobacteria is an extracellular process: Photosynthesizing cells commonly export the photosynthesis byproduct CO32- outside their cells where it bonds with an alkaline earth metal like Ca2+. The cyanobacteria recently found in Lake Alchichica, however, forms amorphous Ca-, Mg-, Sr- and Ba-rich carbonates intracellularly. This discovery significantly modifies the traditional view of how bacteria induce CaCO3 precipitation and may improve understanding of the fossil record by hinting at ancient traces of life in rocks, or designing new routes for sequestering CO2 or 90Sr in minerals.

458

Plate forming and break down pizza box  

SciTech Connect

A standard corrugated paper pizza box is provided with slit cuts cut through the top panel of the pizza box in a shape to form four circular serving plates with a beveled raised edge and cross slit cuts through the bottom panel of the pizza box separating the box into four essentially equal portions for easy disposal.

Pantisano, Frank (411 Linda Ave., Blackwood, NJ 08012); Devine, Scott M. (B7 Fairways Apartments, Blackwood, NJ 08012)

1992-01-01T23:59:59.000Z

459

New Species of Cyanobacteria Forms Intracellular Carbonates  

NLE Websites -- All DOE Office Websites (Extended Search)

New Species of Cyanobacteria New Species of Cyanobacteria Forms Intracellular Carbonates New Species of Cyanobacteria Forms Intracellular Carbonates Print Wednesday, 30 January 2013 00:00 A new species of cyanobacteria-photosynthetic bacteria that occupy a wide array of habitats-was discovered in the Mexican Lake of Alchichica where massive carbonate rocks form. Cyanobacteria have been impacting the global carbon cycle of the Earth for more than 2.3 billion years by assimilating CO2 into organic compounds and triggering calcium carbonate (CaCO3) precipitation. Despite the importance of this cyanobacteria-mediated CaCO3 biomineralization, the mechanistic details of this process are still poorly understood. Scientists agree that calcification in cyanobacteria is an extracellular process: Photosynthesizing cells commonly export the photosynthesis byproduct CO32- outside their cells where it bonds with an alkaline earth metal like Ca2+. The cyanobacteria recently found in Lake Alchichica, however, forms amorphous Ca-, Mg-, Sr- and Ba-rich carbonates intracellularly. This discovery significantly modifies the traditional view of how bacteria induce CaCO3 precipitation and may improve understanding of the fossil record by hinting at ancient traces of life in rocks, or designing new routes for sequestering CO2 or 90Sr in minerals.

460

New Species of Cyanobacteria Forms Intracellular Carbonates  

NLE Websites -- All DOE Office Websites (Extended Search)

New Species of Cyanobacteria Forms Intracellular Carbonates Print New Species of Cyanobacteria Forms Intracellular Carbonates Print A new species of cyanobacteria-photosynthetic bacteria that occupy a wide array of habitats-was discovered in the Mexican Lake of Alchichica where massive carbonate rocks form. Cyanobacteria have been impacting the global carbon cycle of the Earth for more than 2.3 billion years by assimilating CO2 into organic compounds and triggering calcium carbonate (CaCO3) precipitation. Despite the importance of this cyanobacteria-mediated CaCO3 biomineralization, the mechanistic details of this process are still poorly understood. Scientists agree that calcification in cyanobacteria is an extracellular process: Photosynthesizing cells commonly export the photosynthesis byproduct CO32- outside their cells where it bonds with an alkaline earth metal like Ca2+. The cyanobacteria recently found in Lake Alchichica, however, forms amorphous Ca-, Mg-, Sr- and Ba-rich carbonates intracellularly. This discovery significantly modifies the traditional view of how bacteria induce CaCO3 precipitation and may improve understanding of the fossil record by hinting at ancient traces of life in rocks, or designing new routes for sequestering CO2 or 90Sr in minerals.

Note: This page contains sample records for the topic "form parts iv-vii" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Forming foam structures with carbon foam substrates  

Science Conference Proceedings (OSTI)

The invention provides foams of desired cell sizes formed from metal or ceramic materials that coat the surfaces of carbon foams which are subsequently removed. For example, metal is located over a sol-gel foam monolith. The metal is melted to produce a metal/sol-gel composition. The sol-gel foam monolith is removed, leaving a metal foam.

Landingham, Richard L.; Satcher, Jr., Joe H.; Coronado, Paul R.; Baumann, Theodore F.

2012-11-06T23:59:59.000Z

462

COMMISSION REPORT FORMS AND INSTRUCTIONS FOR  

E-Print Network (OSTI)

Director #12;ABSTRACT These electric transmission forms ask utility owners of bulk electric transmission on their projects. Electric transmission system owners in California have until March 18, 2011 to submit their data: Electric transmission, bulk electric transmission system facilities, transmission corridor, data request

463

4-H Club Officer Handbook - Forms  

E-Print Network (OSTI)

This section from the 4-H Club Officer Handbook contains key forms that various clubs leader rely on to help them carry out their duties. Included are sample checks and deposit slips to help make practice perfect for the Treasurer. Taking minutes and keeping track of attendance are tasks made more simple with a sample roster, agenda worksheet and contact sheet.

Howard, Jeff W.

2006-08-09T23:59:59.000Z

464

Methods for forming wellbores in heated formations  

DOE Patents (OSTI)

A method for forming a wellbore in a heated formation includes flowing liquid cooling fluid to a bottom hole assembly in a wellbore in a heated formation. At least a portion of the liquid cooling fluid is vaporized at or near a region to be cooled. Vaporizing the liquid cooling fluid absorbs heat from the region to be cooled.

Guimerans, Rosalvina Ramona; Mansure, Arthur James

2012-09-25T23:59:59.000Z

465

MEDICAL/ DENTAL/ VISION ENROLLMENT / CHANGE FORM  

E-Print Network (OSTI)

MEDICAL/ DENTAL/ VISION ENROLLMENT / CHANGE FORM Changes are effective the 1st of the next month UNM Medical Plan Third Party Administrator Election Dental Plan Election Vision Plan Election Lovelace: (Add or Remove) Mark Type of Coverage for each Enrollee Spouse Add Remove Medical Dental Vision

New Mexico, University of

466

Texas Union Pizza Order Form ROOM RESERVED ______________________________________________________  

E-Print Network (OSTI)

#12;#12;Texas Union Pizza Order Form ROOM RESERVED: ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ Pick-up All orders are to be picked up at the Texas Union Hospitality Center desk in the south end West with the Texas Union Policies and Procedures. I understand that I will be held responsible for any debts incurred

Texas at Austin, University of

467

Normal Forms for General Polynomial Matrices - CECM  

E-Print Network (OSTI)

triangular form has many obvious advantages for such operations as solving linear equations it ... where the powers of a positive integer ? give an appropriate shift. ... are useful for nullspace and polynomial system solving problems. ...... [28] V. M. Popov, Some Properties of Control Systems with Irreducible Matrix Transfer ...

468

COMMISSION REPORT FORMS AND INSTRUCTIONS FOR  

E-Print Network (OSTI)

explain the units reported (for example, number of customers or number of accounts), and whether Division. Publication number: CEC-200-2010-007-CMF. iii #12;TABLE OF CONTENTS ABSTRACT ................................................7 Form 1.3 Peak Demand by Sector (Bundled Customers

469

Technetium Waste Form Development Progress Report  

SciTech Connect

The approach being followed to evaluate the use of an iron-based alloy waste form to immobilize the Tc-bearing waste streams generated during the aqueous and electrochemical processing of used fuel that is being studied in the DOE Advanced Fuel Cycle Initiative (AFCI) is presented in this report. The objective is to develop an alloy waste form that provides high waste loading within waste form processing limitations, meets waste form performance requirements for durability and the long-term retention of radionuclides, and can be produced with consistent physical, chemical, and radiological properties that meet regulatory acceptance requirements for disposal. Microanalysis using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) was used to analyze non-radioactive Fe-Mo-Re samples. A sample was prepared for SEM; however, significant unforeseen instrument problems led to delays in conducting the detailed work. The TEM was not available for this particular sample and therefore only preliminary SEM work can be reported. The results are in agreement with previous studies [Ebert 2009]; however, a rhenium-rich region within the Re-Mo phase is clearly visible.

Buck, Edgar C.

2010-02-26T23:59:59.000Z

470

Spray Forming Aluminum - Final Report (Phase II)  

SciTech Connect

The U.S. Department of Energy - Office of Industrial Technology (DOE) has an objective to increase energy efficient and enhance competitiveness of American metals industries. To support this objective, ALCOA Inc. entered into a cooperative program to develop spray forming technology for aluminum. This Phase II of the DOE Spray Forming Program would translate bench scale spray forming technology into a cost effective world class process for commercialization. Developments under DOE Cooperative Agreement No. DE-FC07-94ID13238 occurred during two time periods due to budgetary constraints; April 1994 through September 1996 and October 1997 and December 1998. During these periods, ALCOA Inc developed a linear spray forming nozzle and specific support processes capable of scale-up for commercial production of aluminum sheet alloy products. Emphasis was given to alloys 3003 and 6111, both being commercially significant alloys used in the automotive industry. The report reviews research performed in the following areas: Nozzel Development, Fabrication, Deposition, Metal Characterization, Computer Simulation and Economics. With the formation of a Holding Company, all intellectual property developed in Phases I and II of the Project have been documented under separate cover for licensing to domestic producers.

D. D. Leon

1999-07-08T23:59:59.000Z

471

Page 1 of 1 Author Query Form  

E-Print Network (OSTI)

of uranium by aerosols. 237 Heavy Element Colloids in Nevada Test Site 238 Migration of plutonium and other also been 315 proposed as a waste form for immobilization of plutonium 316 from dismantled nuclear properties of plutonium in natural 566 waters. Environ. Sci. Technol. 1985, 19 (2), 127­ 567 131. 568 28. Kim

Utsunomiya, Satoshi

472

LAND USE, COVER AND FORMS CLASSIFICATION SYSTEM  

E-Print Network (OSTI)

upon request other state agencies in their mapping activities. Although our primary responsibility. 1 #12;2 A committee representing eight state agencies was formed in 1973 to improve land resources data coordination within the various state agencies by reducing duplication of effort and increasing

Binford, Michael W.

473

BRAZIL VISITING FELLOWSHIP SCHEME Application Form  

E-Print Network (OSTI)

BRAZIL VISITING FELLOWSHIP SCHEME Application Form APPLICATIONS SHOULD BE TYPEWRITTEN AND BOXES of attendance Qualifications awarded and class of Honours, etc. Principal Subject(s) taken #12;BRAZIL VISITING): Date(s) From To To Nature of work and Position held Name and address of employer #12;BRAZIL VISITING

Birmingham, University of

474

Active superconducting devices formed of thin films  

DOE Patents (OSTI)

Active superconducting devices are formed of thin films of superconductor which include a main conduction channel which has an active weak link region. The weak link region is composed of an array of links of thin film superconductor spaced from one another by voids and selected in size and thickness such that magnetic flux can propagate across the weak link region when it is superconducting. Magnetic flux applied to the weak link region will propagate across the array of links causing localized loss of superconductivity in the links and changing the effective resistance across the links. The magnetic flux can be applied from a control line formed of a superconducting film deposited coplanar with the main conduction channel and weak link region on a substrate. The devices can be formed of any type to superconductor but are particularly well suited to the high temperature superconductors since the devices can be entirely formed from coplanar films with no overlying regions. The devices can be utilized for a variety of electrical components, including switching circuits, amplifiers, oscillators and modulators, and are well suited to microwave frequency applications.

Martens, Jon S. (Madison, WI); Beyer, James B. (Madison, WI); Nordman, James E. (Madison, WI); Hohenwarter, Gert K. G. (Madison, WI)

1991-05-28T23:59:59.000Z

475

Manifold free multiple sheet superplastic forming  

DOE Patents (OSTI)

Fluid-forming compositions in a container attached to enclosed adjacent sheets are heated to relatively high temperatures to generate fluids (gases) that effect inflation of the sheets. Fluid rates to the enclosed space between the sheets can be regulated by the canal from the container. Inflated articles can be produced by a continuous, rather than batch-type, process.

Elmer, John W. (Danville, CA); Bridges, Robert L. (Knoxville, TN)

2001-01-01T23:59:59.000Z

476

Forming test collections with no system pooling  

Science Conference Proceedings (OSTI)

Forming test collection relevance judgments from the pooled output of multiple retrieval systems has become the standard process for creating resources such as the TREC, CLEF, and NTCIR test collections. This paper presents a series of experiments examining ... Keywords: evaluation of qrel sets, test collection formation

Mark Sanderson; Hideo Joho

2004-07-01T23:59:59.000Z

477

New Species of Cyanobacteria Forms Intracellular Carbonates  

NLE Websites -- All DOE Office Websites (Extended Search)

New Species of Cyanobacteria Forms Intracellular Carbonates Print New Species of Cyanobacteria Forms Intracellular Carbonates Print A new species of cyanobacteria-photosynthetic bacteria that occupy a wide array of habitats-was discovered in the Mexican Lake of Alchichica where massive carbonate rocks form. Cyanobacteria have been impacting the global carbon cycle of the Earth for more than 2.3 billion years by assimilating CO2 into organic compounds and triggering calcium carbonate (CaCO3) precipitation. Despite the importance of this cyanobacteria-mediated CaCO3 biomineralization, the mechanistic details of this process are still poorly understood. Scientists agree that calcification in cyanobacteria is an extracellular process: Photosynthesizing cells commonly export the photosynthesis byproduct CO32- outside their cells where it bonds with an alkaline earth metal like Ca2+. The cyanobacteria recently found in Lake Alchichica, however, forms amorphous Ca-, Mg-, Sr- and Ba-rich carbonates intracellularly. This discovery significantly modifies the traditional view of how bacteria induce CaCO3 precipitation and may improve understanding of the fossil record by hinting at ancient traces of life in rocks, or designing new routes for sequestering CO2 or 90Sr in minerals.

478

April, 27, 2010 Forms of Energy  

E-Print Network (OSTI)

Coal Methane Nuclear Oil Renewable Wind Solar Hydro Ethanol?? #12;#12;Carbon Based Energy CoalEnergy and Emissions Christina Gosnell ATOC 3500 April, 27, 2010 #12;Forms of Energy Traditional,744 Mercury 0.000 0.007 0.016 Fossil Fuel Emission Levels Pounds per Billion Btu of Energy Input #12;C+ O2

Toohey, Darin W.

479

Directory of energy data collection forms: Forms in use as of October 1994  

SciTech Connect

This 18th edition directory provides an overview of DOE`s energy information collection programs for decisionmakers in Government and industry; selected public use forms currently used as basic energy information gathering tools by DOE are covered. For each form, an abstract is included that describes the form`s uses, its respondents, and the data collected. Also shown are frequently requested items: energy sources and functions covered by the form, general categories of respondents, collection frequency, public laws and regulations, reporting requirement, name and phone number of the data collection manager, and the publications resulting from the data collection. Indexes, arranged according to energy source/function, publications, respondent categories, former EIA form number designations, and collection authorities, are provided.

Not Available

1994-12-15T23:59:59.000Z

480

Form EIA-923 Form Approval: OMB No. 1905-0129 POWER PLANT ...  

U.S. Energy Information Administration (EIA)

PURPOSE Form EIA-923 collects information from electric power plants and combined heat ... Facilities that do not generate electricity but serve either as a transfer ...

Note: This page contains sample records for the topic "form parts iv-vii" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Regeneration of Lost Parts in Animals  

NLE Websites -- All DOE Office Websites (Extended Search)

Regeneration of Lost Parts in Animals Regeneration of Lost Parts in Animals Nature Bulletin No. 751 April 11, 1964 Forest Preserve District of Cook County Seymour Simon, President David H. Thompson, Senior Naturalist REGENERATION OF LOST PARTS IN ANIMALS For ages, mankind has been fascinated with the idea that lost parts of animals can be regrown. According to Greek legend, one of the twelve "labors" of Hercules was the destruction of the Hydra, a gigantic monster with nine serpents' heads. Finding that as soon as one head was cut off two new ones grew in its place, at last he burned out their roots with firebrands. All animals have the power of regeneration to a greater or lesser degree. In man and higher animals it is quite limited. We see it most often in the healing of wounds and the mending of bones. A lost fingernail can be replaced but not a lost finger. Lower animals have a much greater ability to replace parts. For instance, the little half-inch flatworm, Planaria, that lives under rocks in clean creeks can be cut into as many as 32 pieces and each fragment is able to rebuild a miniature flatworm complete with head, tail, eyes, mouth and internal organs.

482

Prediction of Part Distortion in Die Casting  

SciTech Connect

The die casting process is one of the net shape manufacturing techniques and is widely used to produce high production castings with tight tolerances for many industries. An understanding of the stress distribution and the deformation pattern of parts produced by die casting will result in less deviation from the part design specification, a better die design and eventually more productivity and cost savings. This report presents methods that can be used to simulate the die casting process in order to predict the deformation and stresses in the produced part and assesses the degree to which distortion modeling is practical for die casting at the current time. A coupled thermal-mechanical finite elements model was used to simulate the die casting process. The simulation models the effect of thermal and mechanical interaction between the casting and the die. It also includes the temperature dependant material properties of the casting. Based on a designed experiment, a sensitivity analysis was conducted on the model to investigate the effect of key factors. These factors include the casting material model, material properties and thermal interaction between casting and dies. To verify the casting distortion predictions, it was compared against the measured dimensions of produced parts. The comparison included dimensions along and across the parting plane and the flatness of one surface.

R. Allen Miller

2005-03-30T23:59:59.000Z

483

APPLICATION FO FLOW FORMING FOR USE IN RADIOACTIVE MATERIAL PACKAGING DESIGNS  

SciTech Connect

This paper reports on the development and testing performed to demonstrate the use of flow forming as an alternate method of manufacturing containment vessels for use in radioactive material shipping packaging designs. Additionally, ASME Boiler and Pressure Vessel Code, Section III, Subsection NB compliance along with the benefits compared to typical welding of containment vessels will be discussed. SRNL has completed fabrication development and the testing on flow formed containment vessels to demonstrate the use of flow forming as an alternate method of manufacturing a welded 6-inch diameter containment vessel currently used in the 9975 and 9977 radioactive material shipping packaging. Material testing and nondestructive evaluation of the flow formed parts demonstrate compliance to the minimum material requirements specified in applicable parts of ASME Boiler and Pressure Vessel Code, Section II. Destructive burst testing shows comparable results to that of a welded design. The benefits of flow forming as compared to typical welding of containment vessels are significant: dimensional control is improved due to no weld distortion; less final machining; weld fit-up issues associated with pipes and pipe caps are eliminated; post-weld non-destructive testing (i.e., radiography and die penetrant tests) is not necessary; and less fabrication steps are required. Results presented in this paper indicate some of the benefits in adapting flow forming to design of future radioactive material shipping packages containment vessels.

Blanton, P.; Eberl, K.; Abramczyk, G.

2012-07-11T23:59:59.000Z

484

J . Fluid Mech. (1980),vol. 100, part 4, pp. 705-737 Printed in &eat Britain  

E-Print Network (OSTI)

J . Fluid Mech. (1980),vol. 100, part 4, pp. 705-737 Printed in &eat Britain 706 Vortex dynamics, and if they equilibrate between mergings, conservation of energy and angular momentum #12;Vortex dynamics of the turbulent, with vortices of one generation merging to form the larger vortices of the next generation. The reader

Siggia, Eric

485

Complete Set of all Reporting Forms | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Forms More Documents & Publications Natural Gas Exports by Pipeline out of the U.S. Form LNG Exports by Truck out of the U.S. Form CNG Exports by Truck out of the U.S. Form...

486

In-Transit Natural Gas Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

In-Transit Natural Gas Form In-Transit Natural Gas Form Excel Version of In-Transit Natural Gas Form.xlsx PDF Version of In-Transit Natural Gas Form More Documents & Publications...

487

EIA - 2008 New Electric Power EIA-860 Form  

U.S. Energy Information Administration (EIA)

New EIA-860 Schedule 6. Formerly collected on the EIA-767. Part A. Plant Configuration (Schedule 2) Part B. Boiler Information Air Emission Standards (Schedule 4 ...

488

Re: Ex parte communication | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Re: Ex parte communication Re: Ex parte communication Re: Ex parte communication On April 20, 2010, Scott Bates, Corporate Vice President and General Counsel, and Karen Meyers, Director of Government Affairs, both of the Rheem Manufacturing Company ("Rheem"), accompanied by their counsel, Bill Anaya of Alston & Bird, LLP, met with Department of Energy ("DOE") officials Scott Harris, General Counsel, Maureen McLaughlin, Special Assistant to the General Counsel, and Stephanie Weiner, Special Assistant, Office of the General Counsel. At the meeting, Rheem applauded the leadership being provided by the Office of the General Counsel across a broad portfolio of policies and initiatives. Participants discussed Rheem's engagement as a company that brings a broad range of products, including air conditioners, furnaces,

489

Re: Ex parte communication | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Ex parte communication Ex parte communication Re: Ex parte communication On April 20, 2010, Scott Bates, Corporate Vice President and General Counsel, and Karen Meyers, Director of Government Affairs, both of the Rheem Manufacturing Company ("Rheem"), accompanied by their counsel, Bill Anaya of Alston & Bird, LLP, met with Department of Energy ("DOE") officials Scott Harris, General Counsel, Maureen McLaughlin, Special Assistant to the General Counsel, and Stephanie Weiner, Special Assistant, Office of the General Counsel. At the meeting, Rheem applauded the leadership being provided by the Office of the General Counsel across a broad portfolio of policies and initiatives. Participants discussed Rheem's engagement as a company that brings a broad range of products, including air conditioners, furnaces,

490

10 CFR Part 830, Nuclear Safety Management  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

10 10 Federal Register / Vol. 66, No. 7 / Wednesday, January 10, 2001 / Rules and Regulations issued August 5, 1998, are adopted as a final rule with the following change: PART 1446-PEANUTS 1. The authority citation for part 7 CFR part 1446 continues to read as follows: Authority: 7 U.S.C. 7271; 15 U.S.C. 714b and 714c. 2. Paragraph (c) of § 1446.102 is amended by adding a new sentence to the end of the paragraph to read as follows: § 1446.102 Administration. * * * * * (c) Supervisory authority. * * * Further, the Director of TPD, FSA, may authorize the wavier or modification of deadlines and other requirements, except statutory deadlines or requirements, in cases where lateness or the failure to meet such other requirements does not adversely affect operation of the program. 3. Paragraph (3) of the definition of

491

Testing user form | OpenEI Community  

Open Energy Info (EERE)

Testing user form Testing user form Home > Groups > Databus Testing notification of group Q&A Submitted by Prusso on 26 June, 2013 - 06:25 2 answers Points: 0 You may need to edit your profile notification settings. I see that both Prusso and Deanhiller have group subscriptions set up, but I am not certain that they are configured correctly. I enabled more content by group notifications in the notification settings, I don't think this was correctly passing all selected content types even though that value was the default. I also enabled notifications for individual types and tested on my profile. The appropriate content types are now appearing in my subscription list, so I suggest that you re-visit notification settings and add a new subscription- MY ACCOUNT --> NOTIFICATION SETTINGS --> ADD SUBSCRIPTION -->

492

Fermilab | Science Next Door | Subscription Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Facebook row spacer Twitter row spacer YouTube row spacer Subscribe | Fermilab Home row spacer row spacer row spacer Subscribe to Science Next Door If you would like to receive Science Next Door, Fermilab's monthly email community newsletter, please fill in the form below. If you are already receiving Science Next Door and you would like to unsubscribe, you may use the same form. If you have questions, please email fermilab@fnal.gov. Please select: Subscribe to Science Next Door Unsubscribe from Science Next Door Email address: Name (First Last): Send Reset row spacer row spacer row spacer Fermi National Accelerator Laboratory Fermi National Accelerator Laboratory Office of Science / U.S. Department of Energy Managed by Fermi Research Alliance, LLC

493

First Name Last Name EMPLOYEE INFORMATION FORM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

First Name First Name Last Name EMPLOYEE INFORMATION FORM Date of Birth SSN Married Not Married Male Female Current Home Address Line 1 Current Home Address Line 2 City State Zip Zip+4 Home Phone Number Department/Agency Operating Administration Office Position Title Grade Work Address Line 1 Work Address Line 2 City State Zip Zip+4 Office Phone Number Affidavit Date Appointment Date Apartment # Middle Name Use as Beneficiary Yes No U.S. Department of Energy 1000 Independence Ave. SW Washington DC 20585 STANDARD FORM 144 (Rev. 10/95) Page 2 Office of Personnel Management The Guide to Processing Personnel Actions STATEMENT OF PRIOR FEDERAL SERVICE To be Completed by Employee NSN 7540-00-634-4101 Previous Edition Usable 144-114 1. Name (Last, First, Middle Initial) 2. Social Security Number 3. Date of Birth (Month, Day, Year)

494

Employee Assistance Self-ID Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Request for Assistance During an Emergency Request for Assistance During an Emergency Employee Self Identification This form is to be used by persons who expect that they will need assistance during an emergency. The purpose of this form is to help Program Office supervisors and the Incident Management Team ensure that plans are in place to assist persons with temporary or permanent disabilities during an emergency. The Incident Management Team would rather work with someone on a specific plan of action before an emergency than have an individual experience a problem in the middle of an emergency. Note: There are many conditions which might require assistance during an emergency. Conditions can be temporary (e.g., a broken leg, on chemotherapy drugs, or pregnancy) or permanent (e.g., a hearing loss, an amputated limb,

495

Testing user form | OpenEI Community  

Open Energy Info (EERE)

Testing user form Testing user form Home > Groups > Databus Testing notification of group Q&A Submitted by Prusso on 26 June, 2013 - 06:25 2 answers Points: 0 You may need to edit your profile notification settings. I see that both Prusso and Deanhiller have group subscriptions set up, but I am not certain that they are configured correctly. I enabled more content by group notifications in the notification settings, I don't think this was correctly passing all selected content types even though that value was the default. I also enabled notifications for individual types and tested on my profile. The appropriate content types are now appearing in my subscription list, so I suggest that you re-visit notification settings and add a new subscription- MY ACCOUNT --> NOTIFICATION SETTINGS --> ADD SUBSCRIPTION -->

496

Steam-channel-expanding steam form drive  

SciTech Connect

In a viscous oil reservoir in which the stratification of the rock permeability is insufficient to confine steam within the most permeable strata, oil can be produced by forming and expanding a steam channel through which steam is flowed and oil is produced. Steam is injected and fluid is produced at rates causing a steam channel to be extended between locations that are horizontally separated. A foam-forming mixture of steam, noncondensable gas and surfactant is then injected into the steam channel to provide foam and a relatively high pressure gradient within the channel, without plugging the channel. A flow of steam-containing fluid through the steam channel is continued in a manner such that the magnitudes of the pressure gradient, the rate of oil production, and the rate of steam channel expansion exceed those which could be provided by steam alone. 10 claims, 6 figures.

Dilgren, R.E.; Hirasaki, G.J.; Hill, H.J.; Whitten, D.G.

1978-05-02T23:59:59.000Z

497

Conductor assembly formed about a curved axis  

DOE Patents (OSTI)

A conductor assembly of the type which, when conducting current, generates a magnetic field or in which, in the presence of a changing magnetic field, a voltage is induced. In the assembly a first layer, tubular in shape, is formed about an axis. The axis includes a curved portion along which a conductor may be positioned to define a first conductor path. The first layer also includes a curved portion having a shape that includes a curve extending along the curved portion of the axis. A first conductor is arranged about the curved portion of the first layer in a first helical configuration including a curved segment, helical in shape and formed about the curved portion of the axis. The configuration is capable of sustaining a magnetic field having multipole components oriented in directions transverse to the axis.

Meinke, Rainer (Melbourne, FL)

2011-02-15T23:59:59.000Z

498

Secondary Waste Forms and Technetium Management  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Secondary Waste Forms and Secondary Waste Forms and Technetium Management Joseph H. Westsik, Jr. Pacific Northwest National Laboratory EM HLW Corporate Board Meeting November 18, 2010 What are Secondary Wastes? Process condensates and scrubber and/or off-gas treatment liquids from the pretreatment and ILAW melter facilities at the Hanford WTP. Sent from WTP to the Effluent Treatment Facility (ETF) for treatment and disposal Treated liquid effluents under the ETF State Wastewater Discharge Permit Solidified liquid effluents under the Dangerous Waste Permit for disposal at the Integrated Disposal Facility (IDF) Solidification Treatment Unit to be added to ETF to provide capacity for WTP secondary liquid wastes 2 Evaporator Condensate Solution Evaporator Pretreatment Melter SBS/ WESP Secondary

499

Attachment to Registered Lobbyist Disclosure Form: R  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Registered Lobbyist Disclosure Form: R. Paul Detwiler Registered Lobbyist Disclosure Form: R. Paul Detwiler April 17, 2009 10:10 - 11:15 am At the request of the staff of Pennsylvania State Sen. Jim Ferlo, I attended a meeting of the Pittsburgh Green Innovators to answer logistical questions regarding the availability of Recovery Act funding for energy efficiency and renewable energy projects in Pittsburgh. The meeting was attended by elected officials, their staffs, a representative of a private foundation and others; it focused on a particular project -- renovation of a former vocational school campus in Pittsburgh. The meeting was also attended by Charles J. Kolling, Jr., who identified himself as a registered lobbyist in response to a question I posed to those in attendance. My remarks were limited to logistical matters

500

WeldingFabr&MetalForm  

NLE Websites -- All DOE Office Websites (Extended Search)

Welding, Welding, Fabrication, and Metal Forming Manufacturing Technologies The department consists of three trades: weld- ing; fabrication and assembly; and precision metal forming. These interrelated groups use similar equipment and rely on each other's skills. One stop will get you the service of three reliable trades. The team manufactures and assembles proto- type hardware and has the in-house capability of producing hardware with sizes ranging from thumbnail to rail-car. Expertise includes aircraft quality sheet metal construction, certified weld- ing, and assembly. The staff has experience managing a variety of activities: design modifi- cation assistance; in-house fabrication; and project management and can work with your engineers to transform sketches and ideas into working prototypes.