Powered by Deep Web Technologies
Note: This page contains sample records for the topic "form eia-920 combined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Form EIA-920 - 2005  

U.S. Energy Information Administration (EIA) Indexed Site

Administration Administration Form EIA-920 (2004/2005) COMBINED HEAT AND POWER PLANT REPORT INSTRUCTIONS Form Approval OMB No. 1905-0129 Approval Expires: 11/30/2007 PURPOSE Form EIA-920 Combined Heat and Power Plant Report collects information from combined heat and power (CHP) plants in the United States. Data collected on this form include electric power generation, fuel consumption, fuel heat content, and fossil fuel stocks. These data are used to monitor the status and trends of the electric power industry, and appear in many EIA publications, including: Electric Power Monthly and Annual, Monthly and Annual Energy Reviews, Natural Gas Monthly and Annual, Quarterly Coal Report, and the Renewable Energy Annual. Further information can be found at

2

Form EIA-920 - 2005  

U.S. Energy Information Administration (EIA) Indexed Site

20 (2004/2005) 20 (2004/2005) |COMBINED HEAT AND POWER PLANT REPORT INSTRUCTIONS|Form Approval OMB No. 1905-0129 Approval Expires: 11/30/2007 | |PURPOSE|Form EIA-920 Combined Heat and Power Plant Report collects information from combined heat and power (CHP) plants in the United States. Data collected on this form include electric power generation, fuel consumption, fuel heat content, and fossil fuel stocks. These data are used to monitor the status and trends of the electric power industry, and appear in many EIA publications, including: Electric Power Monthly and Annual, Monthly and Annual Energy Reviews, Natural Gas Monthly and Annual, Quarterly Coal Report, and the Renewable Energy Annual. Further information can be found at

3

Form EIA-906, EIA-920, and EIA-923 Databases | OpenEI  

Open Energy Info (EERE)

906, EIA-920, and EIA-923 Databases 906, EIA-920, and EIA-923 Databases Dataset Summary Description The EIA-906, EIA-920, EIA-923 and predecessor forms provide monthly and annual data on generation and fuel consumption at the power plant and prime mover level. A subset of plants, steam-electric plants 10 MW and above, also provides boiler level and generator level data. Data for utility plants are available from 1970, and for non-utility plants from 1999. Beginning with January 2004 data collection, the EIA-920 was used to collect data from the combined heat and power plant (cogeneration) segment of the non-utility sector; also as of 2004, nonutilities filed the annual data for nonutility source and disposition of electricity. Beginning in 2007, environmental data was collected on Schedules 8A - 8F of the Form 923 and includes by-product

4

Form EIA-906, EIA-920, and EIA-923 Databases

Open Energy Info (EERE)

forms provide monthly and annual data on generation and fuel consumption at the power plant and prime mover level. A subset of plants, steam-electric plants 10 MW and above,...

5

EIA-906 & EIA-920, and EIA-923 Database Notes  

U.S. Energy Information Administration (EIA) Indexed Site

Form EIA-767. Where no 2005 Form EIA-767 data was available, an even alloation among boilersgenerators was made. " ,40240,"Schedule 8, Environmental Information ","The 2007...

6

Microsoft Word - figure_15.doc  

Annual Energy Outlook 2012 (EIA)

Report of Natural and Supplemental Gas Supply and Disposition"; Form EIA-906, "Power Plant Report"; Form EIA-920, "Combined Heat and Power Plant Report"; and Form EIA-923,...

7

Quarterly Coal Report April - June 2012 - U.S. Energy ...  

U.S. Energy Information Administration (EIA)

Production1 Imports Waste Coal Supplied ... 1 Includes refuse recovery. ... "Power Plant Report," Form EIA-920, "Combined Heat and Power Plant ...

8

Summary of the Fall 2004 ASA Meeting  

U.S. Energy Information Administration (EIA) Indexed Site

8 and 29, 2004 8 and 29, 2004 with the Energy Information Administration 1000 Independence Ave., SW. Washington, D.C. 20585 Thursday, October 28, 2004 1. EIA Program to Evaluate Form EIA-920, Combined Heat and Power Plant Report, Robert Rutchik, SMG, EIA In early 2004, EIA disseminated the new survey, Form EIA-920, Combined Heat and Power Plant (CHP) Report to CHP facilities to collect data on their total fuel used, fuel used to generate electricity, generation, and fossil fuel stocks. The survey's primary purpose was to collect fuel used to generate electricity. It should be less than facilities total fuel used. The EIA-920 evaluation was part of EIA's new survey quality self-assessment program and it had three major purposes: Do respondents understand the primary concept that reported total

9

Glass Ceramic Waste Forms for Combined CS+LN+TM Fission Products Waste Streams  

SciTech Connect

In this study, glass ceramics were explored as an alternative waste form for glass, the current baseline, to be used for immobilizing alkaline/alkaline earth + lanthanide (CS+LN) or CS+LN+transition metal (TM) fission-product waste streams generated by a uranium extraction (UREX+) aqueous separations type process. Results from past work on a glass waste form for the combined CS+LN waste streams showed that as waste loading increased, large fractions of crystalline phases precipitated upon slow cooling.[1] The crystalline phases had no noticeable impact on the waste form performance by the 7-day product consistency test (PCT). These results point towards the development of a glass ceramic waste form for treating CS+LN or CS+LN+TM combined waste streams. Three main benefits for exploring glass ceramics are: (1) Glass ceramics offer increased solubility of troublesome components in crystalline phases as compared to glass, leading to increased waste loading; (2) The crystalline network formed in the glass ceramic results in higher heat tolerance than glass; and (3) These glass ceramics are designed to be processed by the same melter technology as the current baseline glass waste form. It will only require adding controlled canister cooling for crystallization into a glass ceramic waste form. Highly annealed waste form (essentially crack free) with up to 50X lower surface area than a typical High-Level Waste (HLW) glass canister. Lower surface area translates directly into increased durability. This was the first full year of exploring glass ceramics for the Option 1 and 2 combined waste stream options. This work has shown that dramatic increases in waste loading are achievable by designing a glass ceramic waste form as an alternative to glass. Table S1 shows the upper limits for heat, waste loading (based on solubility), and the decay time needed before treatment can occur for glass and glass ceramic waste forms. The improvements are significant for both combined waste stream options in terms of waste loading and/or decay time required before treatment. For Option 1, glass ceramics show an increase in waste loading of 15 mass % and reduction in decay time of 24 years. Decay times of {approx}50 years or longer are close to the expected age of the fuel that will be reprocessed when the modified open or closed fuel cycle is expected to be put into action. Option 2 shows a 2x to 2.5x increase in waste loading with decay times of only 45 years. Note that for Option 2 glass, the required decay time before treatment is only 35 years because of the waste loading limits related to the solubility of MoO{sub 3} in glass. If glass was evaluated for similar waste loadings as those achieved in Option 2 glass ceramics, the decay time would be significantly longer than 45 years. These glass ceramics are not optimized, but already they show the potential to dramatically reduce the amount of waste generated while still utilizing the proven processing technology used for glass production.

Crum, Jarrod V.; Turo, Laura A.; Riley, Brian J.; Tang, Ming; Kossoy, Anna; Sickafus, Kurt E.

2010-09-23T23:59:59.000Z

10

Summary Report: Glass-Ceramic Waste Forms for Combined Fission Products  

SciTech Connect

Glass-ceramic waste form development began in FY 2010 examining two combined waste stream options: (1) alkaline earth (CS) + lanthanide (Ln), and (2) + transition metal (TM) fission-product waste streams generated by the uranium extraction (UREX+) separations process. Glass-ceramics were successfully developed for both options however; Option 2 was selected over Option 1, at the conclusion of 2010, because Option 2 immobilized all three waste streams with only a minimal decrease in waste loading. During the first year, a series of three glass (Option 2) were fabricated that varied waste loading-WL (42, 45, and 50 mass%) at fixed molar ratios of CaO/MoO{sub 3} and B{sub 2}O{sub 3}/alkali both at 1.75. These glass-ceramics were slow cooled and characterized in terms of phase assemblage and preliminary irradiation stability. This fiscal year, further characterization was performed on the FY 2010 Option 2 glass-ceramics in terms of: static leach testing, phase analysis by transmission electron microscopy (TEM), and irradiation stability (electron and ion). Also, a new series of glass-ceramics were developed for Option 2 that varied the additives: Al{sub 2}O{sub 3} (0-6 mass%), molar ratio of CaO/MoO{sub 3} and B{sub 2}O{sub 3}/alkali (1.75 to 2.25) and waste loading (50, 55, and 60 mass%). Lastly, phase pure powellite and oxyapatite were synthesized for irradiation studies. Results of this fiscal year studies showed compositional flexibility, chemical stability, and radiation stability in the current glass-ceramic system. First, the phase assemblages and microstructure of all of the FY 2010 and 2011 glass-ceramics are very similar once subjected to the slow cool heat treatment. The phases identified in these glass-ceramics were oxyapatite, powellite, cerianite, and ln-borosilicate. This shows that variations in waste loading or additives can be accommodated without drastically changing the phase assemblage of the waste form, thus making the processing and performance characteristics of the waste form more predictable/flexible. However, in the future, the glass phase still needs to be accurately characterized to determine the effects of waste loading and additives on the glass structure. Initial investigations show a borosilicate glass phase rich in silica. Second, the normalized concentrations of elements leached from the waste form during static leach testing were all below 0.6 g/L after 28d at 90 C, by the Product Consistency Test (PCT), method B. These normalized concentrations are on par with durable waste glasses such as the Low-Activity Reference Material (LRM) glass. The release rates for the crystalline phases (oxyapatite and powellite) appear to be lower (more durable) than the glass phase based on the relatively low release rates of Mo, Ca, and Ln found in the crystalline phases compared to Na and B that are mainly observed in the glass phase. However, further static leach testing on individual crystalline phases is needed to confirm this statement. Third, Ion irradiation and In situ TEM observations suggest that these crystalline phases (such as oxyapatite, ln-borosilicate, and powellite) in silicate based glass ceramic waste forms exhibit stability to 1000 years at anticipated doses (2 x 10{sup 10}-2 x 10{sup 11} Gy). This is adequate for the short lived isotopes in the waste, which lead to a maximum cumulative dose of {approx}7 x 10{sup 9} Gy, reached after {approx}100 yrs, beyond which the dose contributions are negligible. The cumulate dose calculations are based on a glass-ceramic at WL = 50 mass%, where the fuel has a burn-up of 51GWd/MTIHM, immobilized after 5 yr decay from reactor discharge.

Crum, Jarrod V.; Riley, Brian J.; Turo, Laura A.; Tang, Ming; Kossoy, Anna

2011-09-23T23:59:59.000Z

11

Microsoft Word - figure_06_07.doc  

Gasoline and Diesel Fuel Update (EIA)

16.0 16.4 13.0 11.7 11.0 0 2 4 6 8 10 12 14 16 18 20 22 2006 2007 2008 2009 2010 Sources: Energy Information Administration (EIA), Form EIA-176, "Annual Report of Natural and Supplemental Gas Supply and Disposition"; Form EIA-64A, "Annual Report of the Origin of Natural Gas Liquids Production"; Office of Fossil Energy, U.S. Department of Energy, Natural Gas Imports and Exports; Form EIA-895, "Annual Quantity and Value of Natural Gas Production Report"; Form EIA-914, "Monthly Natural Gas Production Report"; Form EIA-906, "Power Plant Report"; Form EIA-920, "Combined Heat and Power Plant Report"; Form EIA-923, "Power Plant Operations Report"; Form EIA-886, "Annual Survey of Alternative Fueled Vehicles"; State agencies; and EIA estimates based

12

Microsoft Word - figure_06_07.doc  

Gasoline and Diesel Fuel Update (EIA)

16.4 16.0 16.4 13.0 11.7 0 2 4 6 8 10 12 14 16 18 20 22 2005 2006 2007 2008 2009 Sources: Energy Information Administration (EIA), Form EIA-176, "Annual Report of Natural and Supplemental Gas Supply and Disposition"; Form EIA-64A, "Annual Report of the Origin of Natural Gas Liquids Production"; Office of Fossil Energy, U.S. Department of Energy, Natural Gas Imports and Exports; Form EIA-895, "Annual Quantity and Value of Natural Gas Production Report"; Form EIA-914, "Monthly Natural Gas Production Report"; Form EIA-906, "Power Plant Report"; Form EIA-920, "Combined Heat and Power Plant Report"; Form EIA-923, "Power Plant Operations Report"; Form EIA-886, "Annual Survey of Alternative Fueled Vehicles"; State agencies; and EIA estimates based

13

U.S. Energy Information Administration | Natural Gas Annual  

U.S. Energy Information Administration (EIA) Indexed Site

2 2 13.0 11.7 10.8 8.0 5.9 0 2 4 6 8 10 12 14 16 2008 2009 2010 2011 2012 Sources: Energy Information Administration (EIA), Form EIA-176, "Annual Report of Natural and Supplemental Gas Supply and Disposition"; Form EIA-64A, "Annual Report of the Origin of Natural Gas Liquids Production"; Office of Fossil Energy, U.S. Department of Energy, Natural Gas Imports and Exports; Form EIA-895, "Annual Quantity and Value of Natural Gas Production Report"; Form EIA-914, "Monthly Natural Gas Production Report"; Form EIA-906, "Power Plant Report"; Form EIA-920, "Combined Heat and Power Plant Report"; Form EIA- 923, "Power Plant Operations Report"; Form EIA-886, "Annual Survey of Alternative Fueled Vehicles"; state agencies; and EIA estimates based on historical data.

14

Microsoft Word - figure_06_07.doc  

Gasoline and Diesel Fuel Update (EIA)

14.7 15.2 16.4 16.0 16.4 0 2 4 6 8 10 12 14 16 18 20 2003 2004 2005 2006 2007 Percent Sources: Energy Information Administration (EIA), Form EIA-176, "Annual Report of Natural and Supplemental Gas Supply and Disposition"; Form EIA-64A, "Annual Report of the Origin of Natural Gas Liquids Production"; Office of Fossil Energy, U.S. Department of Energy, Natural Gas Imports and Exports; Form EIA-895A, "Annual Quantity and Value of Natural Gas Production Report"; Form EIA-914, "Monthly Natural Gas Production Report"; Form EIA-906, "Power Plant Report"; Form EIA-920, "Combined Heat and Power Plant Report"; Form EIA-923, "Power Plant Operations Report"; Form EIA-886, "Annual Survey of Alternative Fueled Vehicle Suppliers and Users"; and EIA estimates.

15

Microsoft Word - figure_06_07.doc  

Gasoline and Diesel Fuel Update (EIA)

1 1 16.4 13.0 11.7 10.8 8.0 0 2 4 6 8 10 12 14 16 18 20 22 2007 2008 2009 2010 2011 Sources: Office of Fossil Energy, U.S. Department of Energy, "Natural Gas Imports and Exports." Sources: Energy Information Administration (EIA), Form EIA-176, "Annual Report of Natural and Supplemental Gas Supply and Disposition"; Form EIA-64A, "Annual Report of the Origin of Natural Gas Liquids Production"; Office of Fossil Energy, U.S. Department of Energy, Natural Gas Imports and Exports; Form EIA-895, "Annual Quantity and Value of Natural Gas Production Report"; Form EIA-914, "Monthly Natural Gas Production Report"; Form EIA-906, "Power Plant Report"; Form EIA-920, "Combined Heat and Power Plant Report"; Form EIA-

16

Microsoft Word - figure_15.doc  

Gasoline and Diesel Fuel Update (EIA)

0 0 0 2 4 6 8 10 2003 2004 2005 2006 2007 Trillion Cubic Feet 0 50 100 150 200 250 Billion Cubic Meters Residential Commercial Industrial Electric Power Sources: Energy Information Administration (EIA), Form EIA-176, "Annual Report of Natural and Supplemental Gas Supply and Disposition"; Form EIA-906, "Power Plant Report"; Form EIA-920, "Combined Heat and Power Plant Report"; and Form EIA-923, "Power Plant Operations Report." Figure 15. Natural Gas Delivered to Consumers in the United States, 2003-2007 Cautionary Note: Number of Residential and Commercial Consumers The Energy Information Administration (EIA) expects that there may be some double counting in the number of residential and commercial customers reported for 2003 through 2007.

17

Improving the Carbon Dioxide Emission Estimates from the Combustion of Fossil Fuels in California  

E-Print Network (OSTI)

Natural Gas Production Report EIA-920 Combined Heat and Power Plant906 Power Plant Report EIA-910 Monthly Natural Gas MarketersPower Plant Operations Report EIA-1605 Voluntary Reporting of Greenhouse Gases FE-746R Import and Export of Natural

de la Rue du Can, Stephane

2010-01-01T23:59:59.000Z

18

Strange Quark Contribution to the Vector and Axial Form Factors of the Nucleon: Combined Analysis of G0, HAPPEx, and Brookhaven E734 Data  

E-Print Network (OSTI)

The strange quark contribution to the vector and axial form factors of the nucleon has been determined for momentum transfers in the range $0.45Lab, and elastic $\

S. F. Pate; D. W. McKee; V. Papavassiliou

2008-05-19T23:59:59.000Z

19

Novel heat pipe combination  

SciTech Connect

The basic heat pipe principle is employed in a heat pipe combination wherein two heat pipes are combined in opposing relationship to form an integral unit; such that the temperature, heat flow, thermal characteristics, and temperature-related parameters of a monitored environment or object exposed to one end of the heat pipe combination can be measured and controlled by controlling the heat flow of the opposite end of the heat pipe combination.

Arcella, F.G.

1978-01-10T23:59:59.000Z

20

Forecast Combinations  

E-Print Network (OSTI)

Forecast combinations have frequently been found in empirical studies to produce better forecasts on average than methods based on the ex-ante best individual forecasting model. Moreover, simple combinations that ignore correlations between forecast errors often dominate more refined combination schemes aimed at estimating the theoretically optimal combination weights. In this chapter we analyze theoretically the factors that determine the advantages from combining forecasts (for example, the degree of correlation between forecast errors and the relative size of the individual models’ forecast error variances). Although the reasons for the success of simple combination schemes are poorly understood, we discuss several possibilities related to model misspecification, instability (non-stationarities) and estimation error in situations where thenumbersofmodelsislargerelativetothe available sample size. We discuss the role of combinations under asymmetric loss and consider combinations of point, interval and probability forecasts. Key words: Forecast combinations; pooling and trimming; shrinkage methods; model misspecification, diversification gains

Allan Timmermann; Jel Codes C

2006-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "form eia-920 combined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

ARM - Forms  

NLE Websites -- All DOE Office Websites (Extended Search)

ARMForms About Become a User Recovery Act Mission FAQ History Organization Participants Facility Statistics Forms Contacts Facility Documents ARM Management Plan (PDF, 335KB) Field...

22

EEOC FORM  

National Nuclear Security Administration (NNSA)

U.S. Department of Energy U.S. Department of Energy National Nuclear Security Administration Management Directive-715 Fiscal Year 2012 DOE NNSA February 4, 2013 i National Nuclear Security Administration U.S. Department of Energy ANNUAL EEO PROGRAM STATUS REPORT EEO PLAN TO ATTAIN THE ESSENTIAL ELEMENTS OF A MODEL EEO PROGRAM Table of Contents Page FORM 715-01 Part A Department or Agency Identifying Information......................1 FORM 715-01 Part B Total Employment....................................................................1 FORM 715-01 Part C Agency Official(s) Responsible for oversight of EEO Program(s)................................................................................................................1

23

order form  

NLE Websites -- All DOE Office Websites (Extended Search)

Customer Order Form Customer Order Form Fermilab Education Office - Customer Order Form PO BOX 500, MS 777, Batavia, IL 60510 * ph. 630-840-8258 * fax 630-840-2500 * avarry@fnal.gov Date: This order be: SHIPPED PICKED UP? Bill to: Ship to: Contact/Institution name: Email: Phone: Fax: Payment method (please circle): Visa/MasterCard - Check - Purchase Order  Visa/MasterCard # P.O. # Exp Date: Quantity Ordered Item Name Item Description (color, size, etc.) Price Each Total Amount  For purchases over $200 only *IL residents ONLY: Add 7.5% sales tax to your order.

24

Sponsorship Form  

Science Conference Proceedings (OSTI)

May 20, 2007 ... Conference Banquet. $5,000. Signage, napkins. (limit 4 sponsors). Mail or fax this form to: TMS c/o Arlene Frances. Phone: (724) 776-9000, ext.

25

Form Approved  

U.S. Energy Information Administration (EIA) Indexed Site

DISCLOSURE OF INFORMATION: The items RESPONDENT IDENTIFICATION Company Name and OTHER PARTY NAME (Item 1.A.), and SELLER'S NAME (Item 3.B.) on Form EIA-858 are DISCLOSURE OF INFORMATION: The items RESPONDENT IDENTIFICATION Company Name and OTHER PARTY NAME (Item 1.A.), and SELLER'S NAME (Item 3.B.) on Form EIA-858 are NOT considered confidential and may be publicly released in identifiable form. All other information you provide will be used for statistical purposes only. In accordance with the Confidential Information Protection provisions of Title V, Subtitle A of Public Law 107-347 and other applicable Federal laws, your responses will be kept confidential and will not be disclosed in identifiable form to anyone other than employees or agents without your consent. By law, every EIA employee, as well as every agent, is subject to a jail term, a fine of up to $250,000, or both if he or she discloses ANY identifiable information about you.

26

Search Combinators  

E-Print Network (OSTI)

The ability to model search in a constraint solver can be an essential asset for solving combinatorial problems. However, existing infrastructure for defining search heuristics is often inadequate. Either modeling capabilities are extremely limited or users are faced with a general-purpose programming language whose features are not tailored towards writing search heuristics. As a result, major improvements in performance may remain unexplored. This article introduces search combinators, a lightweight and solver-independent method that bridges the gap between a conceptually simple modeling language for search (high-level, functional and naturally compositional) and an efficient implementation (low-level, imperative and highly non-modular). By allowing the user to define application-tailored search strategies from a small set of primitives, search combinators effectively provide a rich domain-specific language (DSL) for modeling search to the user. Remarkably, this DSL comes at a low implementation cost to the...

Schrijvers, Tom; Wuille, Pieter; Samulowitz, Horst; Stuckey, Peter J

2012-01-01T23:59:59.000Z

27

Registration Form  

NLE Websites -- All DOE Office Websites (Extended Search)

SNAP COLLABORATION MEETING JUNE 1 - 3, 2006 REGISTRATION FORM To register, please fill out the registration form below and click on the "SEND" button. Your registration will allow us to make security access and hospitality arrangements for you. Deadline: Please register NLT Wednesday, May 24, 2006. 1. Your Name (Last, First): 2. Your Institution: 3. Email address: 4. Citizenship (for non-DOE employees/guests): 5. Arrival date: 6. Departure Date: 7. Will you be attending the working dinner on Thursday, June 1? Yes No 8. Any dietary restrictions? Please click on the "Send" button below to email this form automatically to snap@lbl.gov. An automatic email reply receipt confirmation will be sent back to your email address. Send Reset Thank you!

28

Form1  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

B. U.S. DEPARTMENT OF ENERGY FORM 3304.2, B. U.S. DEPARTMENT OF ENERGY FORM 3304.2, APPROVAL OF EXPERT OR CONSULTANT EMPLOYMENT REQUEST U.S.DEPARTMENT OF ENERGY APPROVAL OF EXPERT OR CONSULTANT EMPLOYMENT REQUEST (Continued on Reverse) DOE F 3304.2 (01-07) 1. Name of Expert or Consultant: 2. Organization: 9. Current Employment (position, company, and location): 10. Home Address (city, state, and zip code): 11. Official Worksite (where services are to be performed): 12. APPROVALS 3. Action Requested: 4. Hourly Rate of Pay: 5. Nature of Appointment: 6. Period for Which Services Are Desired: 7. Estimated Number of Days to Be Worked: 8. Number of Days Worked Under Present Appointment: (Extension Only) 13. Description of Services Required: 14. Justification for this Expert/Consultant Action and Qualifications of Candidate Related to Need for Appointment:

29

Form Approv  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

'JOE I' ':0 'JOE I' ':0 ) e " Flee/romc Form Approv ed by CGIR· 01120195 (8 ./1" United States Government Department of Energy Bonneville Power Administra ion memorandum DATE : uC l J !:' ZD y REPLY TO ATTN OF : KEP-4 SUBJECT: Environmental Clearance Memorandum TO ; Rob Ochs Project Manager - TELM-TPP-3 Proposed Action: Lane-Wendson No.1 Structure 10/5 Access Road Improvement and Pole Replacement Project Budget Information: Work Order # 224549 PP&A Project No.: 1117 Proposed by: Bonneville Power Administration (BPA) Categorical Exclusion Applied (from Sub part 0,10 C.F.R. Part) 021): B 1.3, Routine maintenance activities ... for structures, rights-of-way, infrastructures such as roads, equipment. .. routine maintenance activities, corrective ... .are required to maintain

30

Gammasphere Checklist form  

NLE Websites -- All DOE Office Websites (Extended Search)

Gammasphere Checklist - Submission Form Gammasphere Checklist - Submission Form The use of the FMA and Gammasphere, combined or separately, can involve a number of detection systems and special features. The details of how the measurement will be done should be presented as part of the proposal. Some information on these systems is on the web at www.phy.anl.gov/gammasphere/aux/index.html. For assistance in preparing a proposal and for helping the Program Advisory Committee get a more accurate picture of what is planned, we ask you to use the checklist below. Please check the devices that will be needed for the proposed measurement, and include the checklist with your proposal. Note that some of the items are still under development - others may require considerable planning. Note also that a number of the 'primary' detectors (those that may be needed to

31

Data Capture Form Data capture form  

E-Print Network (OSTI)

Data Capture Form Data capture form Please make use of the data capture form relevant not on the common lists. The data capture form must be printed and used in the field during the census to capture all the data during the BCW. All data captured onto this form must please be submitted by the team

de Villiers, Marienne

32

Form EIA-923 Form Approval: OMB No. 1905-0129 POWER PLANT ...  

U.S. Energy Information Administration (EIA)

PURPOSE Form EIA-923 collects information from electric power plants and combined heat ... Facilities that do not generate electricity but serve either as a transfer ...

33

APPENDIX A: Forms and Instructions Form Form R93D-44 Form R93D-03  

U.S. Energy Information Administration (EIA) Indexed Site

APPENDIX A: Forms and Instructions APPENDIX A: Forms and Instructions Form Form R93D-44 Form R93D-03 Form R93D-59 Instructions Form RT94-02 Form RT94-04 Form RT94-0! Form RT94-03 Form RT94-05 Form RT94-06 Instructions Form RT94-09 Instructions Form RT94-10 Form RT94-07 Form RT94-08 Form RT94-17 Form RT94-19 Form RT94-24 Form RT94-15 Form RT94-13 Form RT94-22 Form RT94-26 Form RT94-18 Form RT94-20 FormRT94-16 Form RT94-14 Form RT94-21 Form RT94-25 FormRT94-ll Form RT94-12 Form RT94-23 Form RT94-27 Section N (Vehicles) of 1993 RECS Questionnaire ............. Cover Letter for VIN Follow-up ........................... Vehicle Information Card (yellow, front only) ................. 1993 RECS Mail Questionnaire, Pages 4-5 (vehicle pages only) .... Instructions for Assembling RTECS Mid-Year Mailings ..........

34

Process Deviation Form  

NLE Websites -- All DOE Office Websites (Extended Search)

3 Process Deviation Form 080822 Page 1 of 3 EOTA - Business Form Document Title: Process Deviation Form Document Number: F-013 Rev. 080822 Document Owner: Elizabeth Sousa Backup...

35

2013 Electricity Form Proposals  

U.S. Energy Information Administration (EIA) Indexed Site

Coal Survey Form Changes 2013 Proposals The U.S. Energy Information Administration (EIA) is proposing to change its data protection policy for the following survey forms: Form...

36

Assessor Forms and Information  

Science Conference Proceedings (OSTI)

Other Forms and Information for Assessors. What's on this page? ... Other Forms and Information. Assessor Biographical Sketch Template, PDF, Word. ...

2013-07-26T23:59:59.000Z

37

Tour Registration Form  

Science Conference Proceedings (OSTI)

Feb 25, 2000 ... Accompanying Persons and Plant Tours. REGISTRATION FORM. PLEASE COMPLETE FORM AND MAIL WITH CHECK TO: Helen L.

38

Gap and stripline combined monitor  

DOE Patents (OSTI)

A combined gap and stripline monitor device for measuring the intensity and position of a charged particle beam bunch in a beam pipe of a synchrotron radiation facility is disclosed. The monitor has first and second beam pipe portions with an axial gap therebetween. An outer pipe cooperates with the first beam pipe portion to form a gap enclosure, while inner strips cooperate with the first beam pipe portion to form a stripline monitor, with the stripline length being the same as the gap enclosure length. 4 figs.

Yin, Y.

1986-08-19T23:59:59.000Z

39

Gap and stripline combined monitor  

DOE Patents (OSTI)

A combined gap and stripline monitor device (10) for measuring the intensity and position of a charged particle beam bunch in a beam pipe of a synchotron radiation facility. The monitor has first and second beam pipe portions (11a, 11b) with an axial gap (12) therebetween. An outer pipe (14) cooperates with the first beam pipe portion (11a) to form a gap enclosure, while inner strips (23a-d) cooperate with the first beam pipe portion (11a) to form a stripline monitor, with the stripline length being the same as the gap enclosure length.

Yin, Yan (Palo Alto, CA)

1986-01-01T23:59:59.000Z

40

A Bakery : in search of appropriate form  

E-Print Network (OSTI)

During the process of designing a building there occurs the continuous task of finding the forms, materials and structure that are fit to the particular building or situation at hand. It is the intent to combine these ...

Kuzmic, Katri

1982-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "form eia-920 combined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Spray-formed tooling  

SciTech Connect

The United States Council for Automotive Research (USCAR) has formed a partnership with the Idaho National Engineering Laboratory (INEL) to develop a process for the rapid production of low-cost tooling based on spray forming technology developed at the INEL. Phase 1 of the program will involve bench-scale system development, materials characterization, and process optimization. In Phase 2, prototype systems will be de signed, constructed, evaluated, and optimized. Process control and other issues that influence commercialization will be addressed during this phase of the project. Technology transfer to USCAR, or a tooling vendor selected by USCAR, will be accomplished during Phase 3. The approach INEL is using to produce tooling, such as plastic injection molds and stamping dies, combines rapid solidification processing and net-shape materials processing into a single step. A bulk liquid metal is pressure-fed into a de Laval spray nozzle transporting a high velocity, high temperature inert gas. The gas jet disintegrates the metal into fine droplets and deposits them onto a tool pattern made from materials such as plastic, wax, clay, ceramics, and metals. The approach is compatible with solid freeform fabrication techniques such as stereolithography, selective laser sintering, and laminated object manufacturing. Heat is extracted rapidly, in-flight, by convection as the spray jet entrains cool inert gas to produce undercooled and semi-solid droplets. At the pattern, the droplets weld together while replicating the shape and surface features of the pattern. Tool formation is rapid; deposition rates in excess of 1 ton/h have been demonstrated for bench-scale nozzles.

McHugh, K.M.; Key, J.F.

1994-12-31T23:59:59.000Z

42

Forms | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Forms Forms Forms DOE Forms are developed within the Department, and approved by the DOE Forms Manager. These forms are designed to obtain or provide structured information common to the needs of two or more DOE field or Headquarters organizations. All of the forms here are in Portable Document Format (PDF). Adobe Acrobat(R) Reader is needed to view and print the PDF files. Fillable forms, identified by the "fillable" icon, require a full version of Adobe Acrobat software. DOE Forms Forms by Subject Forms by Number Management & Administration 0000 - 1999 Legal 2000 - 2999 Personnel Management 3000 - 3999 Logistic Management 4000 - 4999 Program Planning & Management 5000 - 5999 HQ Forms HQ Forms are developed or managed by a Headquarters organization, and

43

2013 Form W-4  

NLE Websites -- All DOE Office Websites (Extended Search)

Form W-4 (2013) Purpose. Complete Form W-4 so that your employer can withhold the correct federal income tax from your pay. Consider completing a new Form W-4 each year and when...

44

Forms | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Forms Forms The following interactive Web-based forms in Adobe Acrobat Portable Document Format (PDF) are designed for online completion with Acrobat Reader 3.0 or above. Input...

45

Forms | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

- 3999 Logistic Management 4000 - 4999 Program Planning & Management 5000 - 5999 HQ Forms HQ Forms are developed or managed by a Headquarters organization, and approved by the DOE...

46

LBNL Affiliate Forms - Cyclotron  

NLE Websites -- All DOE Office Websites (Extended Search)

Safety History Links Directions Webmaster User Info > New User Checklist > LBNL Affiliate Forms v.1 LBNLAffiliateForms.pdf (161k) Daphne Trowbridge-Williams,...

47

Tour Registration Form - TMS  

Science Conference Proceedings (OSTI)

Page 1. Tour Registration Form. Tour Registration Form. Please print legibly below: Participant's Full Name. Telephone. Fax. Mobile. E-mail. Method of ...

48

High temperature methods for forming oxidizer fuel  

DOE Patents (OSTI)

A method of treating a formation fluid includes providing formation fluid from a subsurface in situ heat treatment process. The formation fluid is separated to produce a liquid stream and a first gas stream. The first gas stream includes carbon dioxide, hydrogen sulfide, hydrocarbons, hydrogen or mixtures thereof. Molecular oxygen is separated from air to form a molecular oxygen stream comprising molecular oxygen. The first gas stream is combined with the molecular oxygen stream to form a combined stream comprising molecular oxygen and the first gas stream. The combined stream is provided to one or more downhole burners.

Bravo, Jose Luis (Houston, TX)

2011-01-11T23:59:59.000Z

49

Form:SampleForm | Open Energy Information  

Open Energy Info (EERE)

SampleForm Jump to: navigation, search Input the name of a Test Page below. If the resource already exists, you will be able to edit its information. AddEdit a Test Page The text...

50

SRS - Retiree Benefits - Forms  

NLE Websites -- All DOE Office Websites (Extended Search)

Forms Forms Medical Forms Return completed forms to: 5-200 Health Care Programs Enrollment Change Benefits Solutions Service Center Bldg 703-47A, Aiken, SC 29808 5-340 Medical Claim Form Claims Processing Center P.O. Box 100300, Columbia, SC 29202 -- Pharmacy Claim Form Caremark Prescription Drug Claim Processing Center, P.O. Box 52059, Phoenix, AZ 85072-2059 Dental Forms Return completed forms to: 5-200 Health Care Programs Enrollment Change Benefits Solutions Service Center Bldg 703-47A, Aiken, SC 29808 5-342 Dental Claim Form Claims Processing Center P.O. Box 100300, Columbia, SC 29202 Life Insurance Return completed forms to: 5-171 Contributory Group Life Application and Deduction Authorization Benefits Solutions Service Center Bldg 703-47A, Aiken, SC 29808

51

2014 Electricity Form Proposals  

U.S. Energy Information Administration (EIA) Indexed Site

Electricity and Renewable (Photovoltaic) Survey Form Changes Proposed for Electricity and Renewable (Photovoltaic) Survey Form Changes Proposed for 2014 The U.S. Energy Information Administration (EIA) is proposing changes to its electricity data collection in 2014. These changes involve the following surveys: Form EIA-63B, "Annual Photovoltaic Cell/Module Shipments Report," Form EIA-411, "Coordinated Bulk Power Supply Program Report," Form EIA-826, "Monthly Electric Utility Sales and Revenue Report with State Distributions," Form EIA-860, "Annual Electric Generator Report," Form EIA-860M, "Monthly Update to the Annual Electric Generator Report," Form EIA-861, "Annual Electric Power Industry Report," Form EIA-861S, "Annual Electric Power Industry Report (Short Form)," and

52

EIA Electric Power Forms  

Gasoline and Diesel Fuel Update (EIA)

Electric Power Forms Electric Power Forms EIA Electric Power Forms Listing of Publicly Available and Confidential Data EIA's statistical surveys encompass each significant electric supply and demand activity in the United States. Most of the electric power survey forms resulting data elements are published, but respondent confidentiality is required. The chart below shows the data elements for each survey form and how each data element is treated in regard to confidentiality. Data Categories Data collection forms EIA- 411 EIA- 826 EIA- 860 EIA- 860M EIA- 861 EIA- 923 Frame Information Utility identification and iocation -- -- -- -- X -- Plant identification and iocation -- -- -- X -- X Generation and fuel Latitude and longitude -- -- X -- -- --

53

Exercise Evaluation Forms  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Hazardous Materials Hazardous Materials Exercise Evaluation Forms Prepared for the Department of Energy Office of Transportation and Emergency Management 02B00215-09.p65 This page intentionally left blank table of contents Transportation Emergency Preparedness Program (TEPP) planning tools planning tools Hazar Hazar Hazar Hazar Hazardous Materials dous Materials dous Materials dous Materials dous Materials Ex Ex Ex Ex Exer er er er ercise Ev cise Ev cise Ev cise Ev cise Evaluation Forms aluation Forms aluation Forms aluation Forms aluation Forms Objective 1: Initial Notification of Response Agencies and Response Personnel ........................................................ 3 Objective 2: Direction and Control .............................................................. 5 Objective 3: Incident Assessment ................................................................ 6

54

FOIA Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

You are here: DOEID Home > FOIA > FOIA Request Form You are here: DOEID Home > FOIA > FOIA Request Form U.S. Department of Energy Idaho (DOE-ID) Operations Office Electronic FOIA Request Form* To make an Electronic FOIA (E-FOIA) request, please provide the information below. Failure to enter accurate and complete information may render your FOIA request impossible to fulfill. For individuals making a request for personal records under FOIA or the Privacy Act, please fill out the Privacy Act Request Form ( This link opens an 14 kb size Adobe Acrobat File 15 kb), print out the form and have your identity validated by having the form notarized and send the form to DOE-Idaho Privacy Officer, 1955 Freemont Avenue, Mail Stop 1203, Idaho Falls, ID 83405. * Requests submitted under the Privacy Act must be signed and, therefore, cannot be submitted on this form.

55

Time, energy & form  

E-Print Network (OSTI)

Physical manifestations of time occur in natural forms of all sizes. Architectural form serves as shelter while providing a built envelope of human life, simultaneously influencing and influenced by energetic activities ...

McInnis, Martha Jane

1982-01-01T23:59:59.000Z

56

PMP Tour Form  

Science Conference Proceedings (OSTI)

Tours operate rain or shine. PMP Tour Form. Complete and fax or e-mail this form by November 20 with payment information to: Master Tour Co. Ltd., Thailand.

57

Form EIA-1605  

U.S. Energy Information Administration (EIA)

L Recycling of Fly Ash M Demand-Side Management or Other Emission Reduction Programs N Combined Heat and Power O Other Action-Specific Methods O1 ...

58

OMB Form 424A  

Science Conference Proceedings (OSTI)

... NOT RETURN YOUR COMPLETED FORM TO THE OFFICE OF MANAGEMENT AND BUDGET. ... In preparing the budget, adhere to any existing ...

2013-06-19T23:59:59.000Z

59

tour registration form  

Science Conference Proceedings (OSTI)

Jan 16, 2002 ... ACCOMPANYING PERSONS TOUR REGISTRATION FORM. 31. 131st Annual Meeting & Exhibition. February 17-21, 2002 • Seattle, ...

60

Forms of matter and forms of radiation  

E-Print Network (OSTI)

The theory of defects in ordered and ill-ordered media is a well-advanced part of condensed matter physics. Concepts developed in this field also occur in the study of spacetime singularities, namely: i)- the topological theory of quantized defects (Kibble's cosmic strings) and ii)- the Volterra process for continuous defects, used to classify the Poincar\\'e symmetry breakings. We reassess the classification of Minkowski spacetime defects in the same theoretical frame, starting from the conjecture that these defects fall into two classes, as on they relate to massive particles or to radiation. This we justify on the empirical evidence of the Hubble's expansion. We introduce timelike and null congruences of geodesics treated as ordered media, viz. 'm'-crystals of massive particles and 'r'-crystals of massless particles, with parallel 4-momenta in M^4. Classifying their defects (or 'forms') we find (i) 'm'- and 'r'- Volterra continuous line defects and (ii) quantized topologically stable 'r'-defects, these latter forms being of various dimensionalities. Besides these 'perfect' forms, there are 'imperfect' disclinations that bound misorientation walls in three dimensions. We also speculate on the possible relation of these forms with the large-scale structure of the Universe.

Maurice Kleman

2009-05-28T23:59:59.000Z

Note: This page contains sample records for the topic "form eia-920 combined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Retirement Plaque Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Retirement Plaque Request Form Retirement Plaque Request Form Fill out a separate form for each plaque requested. Allow two weeks for delivery. If you have any questions, please call Rudy Bartolo, Retirement Plaque Coordinator at ext. 5558. FORM MUST BE SUBMITTED (mailed or faxed) in order for work to commence. Return form to Retirement Plaque Coordinator, Mailstop 77R0125, or fax 4993. Please Print Clearly Requester's Name:_______________________________ Extension:_______________ Mail Stop: ________________ Today's date:__________________ With Frame _____ Without Frame_____ Date Needed: ________________________ Full name as it is to appear on plaque:_________________________________________ Number of years employed at Lab:______________ Beginning and ending dates of employment: ____________________________________

62

NEO - Forms Checklist  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

/4/2007; please do not use older versions /4/2007; please do not use older versions Office of Human Capital Management U.S. Department of Energy New Employee Orientation FORMS CHECKLIST EOD Date: _________________ Employee Name: ________________________ Organization: ____________________________ HR Specialist: ___________________________ Telephone Number: _______________________ Admin Contact: __________________________ Telephone Number: _______________________ New Employee Orientation Forms to be issued and collected HR Orientation Team: FORM COMPLETE & SIGNED FORM NAME AND NUMBER YES NO Comments 1. Photo ID 2. Passport; Birth Certificate; or U.S. Citizenship documentation 3. Job Offer Letter Bring on 1 st Day 4. Employment & Benefits Forms listed below

63

2013 Electricity Form Proposals  

U.S. Energy Information Administration (EIA) Indexed Site

Electricity Survey Form Changes in 2013 The U.S. Energy Information Administration (EIA) proposed changes to its electricity data collection in 2013. These changes involve three forms: Form EIA-861, "Annual Electric Power Industry Report" The addition of a new form, the Form EIA-861S, "Annual Electric Power Industry Report (Short Form)" Form EIA-923, "Power Plant Operations Report." The proposals were initially announced to the public via a Federal Register Notice published March 15, 2012. Comments regarding this proposed information collection were due by May 14, 2012. EIA reviewed all comments and made several revisions to the proposals as a result. A second Federal Register Notice was published on August 30, 2012. It outlined the proposals

64

Precision Wire Forming  

SciTech Connect

An air-operated semiautomatic wire former was designed and built at Mound Laboratory to form specific types of electrodes to be molded in plastic parts. Use of the semiautomatic wire former eliminates the sliding action of tooling on the surface of the electrode wire to be formed and properly aligns the crimped electrode surfaces to within required tolerance ranges. These are difficulties which are characteristic of conventional wire forming tooling. Interchangeable tooling is provided with the semiautomatic wire former for forming electrode wires in one plane; secondary tooling was designed and bulit for forming electrode wires in two planes; and a special series of tooling was designed for forming more complex wire forms.

Weeks, J. E.; Osborne, J. M.

1970-08-07T23:59:59.000Z

65

Combined-cycle power tower  

DOE Green Energy (OSTI)

This paper evaluates a new power tower concept that offers significant benefits for commercialization of power tower technology. The concept uses a molten nitrate salt centralreceiver plant to supply heat, in the form of combustion air preheat, to a conventional combined-cycle power plant. The evaluation focused on first commercial plants, examined three plant capacities (31, 100, and 300 MWe), and compared these plants with a solar-only 100-MWe plant and with gas-only combined-cycle plants in the same three capacities. Results of the analysis point to several benefits relative to the solar-only plant including low energy cost for first plants, low capital cost for first plants, reduced risk with respect to business uncertainties, and the potential for new markets. In addition, the concept appears to have minimal technology development requirements. Significantly, the results show that it is possible to build a first plant with this concept that can compete with existing gas-only combined-cycle plants.

Bohn, M.S.; Williams, T.A.; Price, H.W.

1994-10-01T23:59:59.000Z

66

Science Brief Submission Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Science Brief Submission Form Science Brief Submission Form Science Brief Submission Form Print Tuesday, 01 May 2007 00:00 Science Brief Guidelines and Submission Form Please fill out the form below to submit a Science Brief and send ONE image (may be a composite of up to four images) from your publication directly to us at alscommunications@lbl.gov. Please note: The image must be high resolution, and, if there is text on the image, it must be scalable. We will let you know as soon as it is posted! * Required Your Name * Your Email Address * Your Affiliation Title of Publication * Link to Publication (if available) Beamline(s) * Journal Citation * Description of Research * 200 word maximum Image Caption * 50 word maximum Submit Never submit passwords through Google Forms. Powered by Google Docs Report Abuse - Terms of Service - Additional Terms

67

Form EIA-767  

U.S. Energy Information Administration (EIA) Indexed Site

Form EIA-767 (2005) STEAM-ELECTRIC PLANT OPERATION AND DESIGN REPORT Form Approved OMB No. 1905-0129 Approval Expires: 11/30/2007 PURPOSE Form EIA-767 collects information annually from all U.S. plants with a total existing or planned organic-fueled or combustible renewable steam-electric unit that has a generator nameplate rating of 10 megawatts or larger. This report is used for economic analyses conducted by the Department of Energy. The data from this form appear in the Electric Power Annual and the Annual Energy Review. The data collected on this form are used to monitor the current status and trends in the electric power industry and to evaluate the future of the industry. REQUIRED RESPONDENTS A Form EIA-767 must be completed and filed for each existing, under-construction, or planned

68

FFSE Online Membership Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Form Form This form is for people who would like to join or renew membership in Fermilab Friends for Science Education. If you would like to donate to FFSE, but not become a member, please go to the Donation Form. If you are a teacher and would like a joint membership in ISTA and FFSE, use the ISTA/FFSE Form. This form functions like a conventional online shopping cart. You add items to the cart with the "Add to Cart" button and may confirm what is in your cart with the "View Cart" button. To add more items when viewing the cart, click "Continue Shopping." You can choose to contribute to any or all of the options. There are three possible items available to put in the cart. You will be directed further to complete the transaction as you check out.

69

Process / CI Form  

NLE Websites -- All DOE Office Websites (Extended Search)

6 Process / Continual Improvement Form 11_0119 Page 1 of 3 6 Process / Continual Improvement Form 11_0119 Page 1 of 3 EOTA - Business Form Document Title: Process / Continual Improvement Form Document Number: F-016 Rev 11_0119 Document Owner: Elizabeth Sousa Backup Owner: David Rocha Approver(s): Melissa Otero Parent Document: P-012, Process / Continual Improvement Notify of Changes: EOTA Employees Referenced Document(s): N/A F-016 Process / Continual Improvement Form 11_0119 Page 2 of 3 Revision History: Rev. Description of Change A Initial Release 08_0425 Corrected minor problems and updated revision number. 11_0119 Merged F-019 Improvement Opportunity Planning Worksheet into this document F-016 Process / Continual Improvement Form 11_0119 Page 3 of 3

70

Membership form 11  

NLE Websites -- All DOE Office Websites (Extended Search)

Join, renew or donate online at ed.fnal.gov/ffse or use this form. Join, renew or donate online at ed.fnal.gov/ffse or use this form. Fermilab Friends for Science Education Membership Form Membership Levels Director's Club: $1,000.00 Patron: $500.00 Sponsor: $250.00 Dual: $100.00 Regular: $50.00 Teacher: $10.00 Name:_____________________________________________________________________ Partner's Name:_____________________________________________________________ Address:___________________________________________________________________ City, State, Zip:_____________________________________________________________ Telephone:_______________________ E-mail:__________________________

71

Housing Reservation Form  

Science Conference Proceedings (OSTI)

NOTE: PLEASE RETURN THIS FORM BY MAY 31, 2003 to: BY MAIL: Meghan Webb, Conference Services, University of Utah,. 110 S. Ft. Douglas Blvd., Salt ...

72

ESIF Project Proposal Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Systems Integration Project Submittal Form Title of Project: Date Submitted: Name of PI at NREL: Name of PI: InstituteEmployer: Phone: Fax: Street Address: City: State: Country:...

73

w: Reglstratlon Form  

Science Conference Proceedings (OSTI)

Please see Genera! hrfonnatiorr for what is included with each registration category. ASN\\ 0 o w: Reglstratlon Form m I“ . h Value package includes admission to ...

74

IEEE Copyright form  

Science Conference Proceedings (OSTI)

This form is intended for original, previously unpublished material submitted to lEEE .... IEEE Policy 6.17—CLEARANCE OF PAPERS—applies to all material ...

75

Author Biography Form  

Science Conference Proceedings (OSTI)

Author Biography Form. Title: ? Dr. ? Prof. ? Mr. ? Mrs. ? Ms. Gender: ? Male ? Female. Name: First. M.I.. Last. Current Status: Position: Company: Address:.

76

Housing Reservation Form  

Science Conference Proceedings (OSTI)

Zip. Phone. Fax. Credit Card Type*. Number. Expiration Date. Signature. * Visa, MasterCard and Discover credit cards are accepted. Mail or fax this form to:.

77

2014 Coal Form Proposals  

U.S. Energy Information Administration (EIA)

Coal Survey Form Changes Proposed for 2014. The U.S. Energy Information Administration (EIA) has begun the process of re-clearing the coal survey ...

78

Shaping and Forming  

Science Conference Proceedings (OSTI)

"Electroplasticity—The Effect of Electricity on the Mechanical Properties of Metals " ..... "Spray Forming: Alloys, Products, and Markets" (JOM-e: Overview), ...

79

tour reservation form  

Science Conference Proceedings (OSTI)

Mar 15, 2004 ... 37. Send completed Charlotte Tour Registration Form with payment to: America Charters Ltd, 1251 W. Craighead Road, Charlotte, NC 28206.

80

Tour Reservations Form (PDF)  

Science Conference Proceedings (OSTI)

May 2, 2008 ... Page 1. Tour Form. REGISTRANT INFORMATION (Print or type.) Last Name. First Name. Middle ______. Street Address. City. /Province ...

Note: This page contains sample records for the topic "form eia-920 combined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Mentee Profile Form  

Energy.gov (U.S. Department of Energy (DOE))

The information you provide on this form will assist us in providing you with a list of prospective mentors from which to choose the most appropriate match.

82

Mentor Profile Form  

Energy.gov (U.S. Department of Energy (DOE))

The information you provide on this form will assist us in providing you with a list of prospective mentee from which to choose the most appropriate match.

83

Corporate Sponsorship Form - TMS  

Science Conference Proceedings (OSTI)

Sponsorship Reservation Form in order to reserve a sponsorship. Final payment is due ... Payment terms are net 30 days unless other arrangements are made.

84

Participation Form | ENERGY STAR  

NLE Websites -- All DOE Office Websites (Extended Search)

application. Select the ENERGY STAR program you intend to participate in, and choose your primary contacts. Return this form to ENERGY STAR for consideration as a partner....

85

Method for forming cooperative binary ionic solids  

DOE Patents (OSTI)

A nanostructured molecular unit and method for forming is described where a cationic porphyrin having an ethanolic substituent species and a metal in the porphyrin cavity is combined with an anionic porphyrin having a sulfonate substituent species and a metal in the porphyrin cavity to form by self-assembly a nanostructured molecular unit with a morphology comprising four dendritic elements connected at a central node.

Shelnutt, John A.; Martin, Kathleen E.; Wang, Zhongchun; Medforth, Craig J.

2013-03-05T23:59:59.000Z

86

FORM EIA-28  

U.S. Energy Information Administration (EIA) Indexed Site

FORM EIA-28 - Financial Reporting System FORM EIA-28 - Financial Reporting System Sch 5111 Sch 5110 EIA-28 Financial Reporting System Sch 5100 -- Page 1 of 1 2010 Reporting Year January 2011 Instructions i Contents Updates to Instructions for Reporting Year 2009 ....................................................................................................................ii I. General Instructions ................................................................................................................................................................ 1 A. Purpose and Legislative Authority..................................................................................................................................... 1 B. Filing Requirements...........................................................................................................................................................

87

Anniversary Scholarship Application Form  

E-Print Network (OSTI)

at the University of Cambridge should complete the application form below and send it to The Pakistan Application Pakistan. Pakistan nationals who attend schools outside Pakistan are not eligible. 2. Applicants must complete the scholarship application form should be submitted to: The Pakistan Application Centre Cambridge

Travis, Adrian

88

FFSE Online Membership Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Donation Form for FFSE Donation Form for FFSE This form is for people who would like like to donate to FFSE, but not become a member. If you would like to join or renew membership in Fermilab Friends for Science Education., please go to the Membership Form. You have three options for donating. A contribution to the general fund A contribution to the scholarship fund The purchase of a leaf for the Tree of Knowledge ($1,000) Use the tab key to go between text boxes; the keystrokes,"Return" and "Enter," have been disabled to avoid submitting the form prematurely. Donation to the General Fund PayPal - The safer, easier way to pay online! Contribution to Scholarship Fund The scholarship fund provides scholarships to: Schools to cover the cost of bus transportation to Fermilab for field trips. The cost averages about $100.

89

Method for forming materials  

DOE Patents (OSTI)

A material-forming tool and a method for forming a material are described including a shank portion; a shoulder portion that releasably engages the shank portion; a pin that releasably engages the shoulder portion, wherein the pin defines a passageway; and a source of a material coupled in material flowing relation relative to the pin and wherein the material-forming tool is utilized in methodology that includes providing a first material; providing a second material, and placing the second material into contact with the first material; and locally plastically deforming the first material with the material-forming tool so as mix the first material and second material together to form a resulting material having characteristics different from the respective first and second materials.

Tolle, Charles R. (Idaho Falls, ID); Clark, Denis E. (Idaho Falls, ID); Smartt, Herschel B. (Idaho Falls, ID); Miller, Karen S. (Idaho Falls, ID)

2009-10-06T23:59:59.000Z

90

Coach Compliance Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Coach Compliance Form Coach Compliance Form My team is participating in the Department of Energy's Lithium-Ion Battery Car Competition as part of the National Science Bowl ® . I have reviewed the following documents with the participating students: o Safety Hazards of Batteries o Material Safety Data Sheet - Lithium Polymer Battery o Electric Battery Car Competition Rules ______________________________ ______________ Coach Signature Date Name of School: ____________________________________________ Name of Coach (Please Print): ________________________________ Coach's Email Address: ______________________________________ Please sign this form and either mail, fax or e-mail a pdf to the National Renewable Energy Laboratory: National Renewable Energy Laboratory

91

Clinton Combined Utility Sys | Open Energy Information  

Open Energy Info (EERE)

Clinton Combined Utility Sys Clinton Combined Utility Sys Jump to: navigation, search Name Clinton Combined Utility Sys Place South Carolina Utility Id 3804 Utility Location Yes Ownership M NERC Location SERC NERC SERC Yes Operates Generating Plant Yes Activity Generation Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Electric Large General Service Commercial General Electric Service Commercial Residential Rate Residential Average Rates Residential: $0.1250/kWh Commercial: $0.1140/kWh Industrial: $0.0851/kWh References ↑ "EIA Form EIA-861 Final Data File for 2010 - File1_a"

92

ARM - VAP Suggestion Form  

NLE Websites -- All DOE Office Websites (Extended Search)

ProductsVAP Suggestion Form ProductsVAP Suggestion Form Showcase Data ARM Best Estimate Data Products (ARMBE) This is a collection of data products that represents "best estimates" derived from several instruments and/or VAPs. We are interested in your feedback; please contact us. VAP Update Information on new, existing, and future value-added products for July-September 2013 is now available. Have a VAP idea? Use this form to let us know. Datastream Status Further details on the status of VAPs being processed or developed, can be found at on the ARM Value-Added Product (VAP) Status web page. Use the Data File Inventory tool to view VAP data availability at the file level. Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send VAP Suggestion Form

93

PASS Form 22933  

NLE Websites -- All DOE Office Websites (Extended Search)

Private: The information contained on this form is considered private and for administrative use only. Do not copy or distribute. Private: The information contained on this form is considered private and for administrative use only. Do not copy or distribute. PASS Form Information Form: 22933 Title of Experiment: "Comparing Chlorpyrifos Levels in Commercial vs. Organic Parsley" Principal Investigator: Lucinda Hemmick Institution: Longwood Sr. High School Primary Field of Research: Environmental Sciences Type of Proposal: Rapid Access On-site Access: Experiment will be performed on-site, in person by the PI's experimenters. The PI (and approved experimenters) may also request remote computer access for operating equipment, data collection and retrieving data. Research Abstract of this experiment. This section will be used for funding agency reporting purposes. This information and the proposal title may become public information.:

94

SGP Shipment Notification Form  

NLE Websites -- All DOE Office Websites (Extended Search)

PlainsShipment Notification Form PlainsShipment Notification Form SGP Related Links Facilities and Instruments Central Facility Boundary Facility Extended Facility Intermediate Facility Radiometric Calibration Facility Geographic Information ES&H Guidance Statement Operations Science Field Campaigns Visiting the Site Fact Sheet Images Information for Guest Scientists Contacts Shipment Notification Form Note: Red text indicates a required field. Your Notification Form has been submitted. Section 1 : Initiator Information Date Afilliation Name Phone Number Email Section 2 : Vendor Information Ship From Point of Contact Address Phone Section 3 : Carrier Information Shipping Company Tracking/AWB Number Number of Boxes Approximate Weight for EACH BOX Expected Ship Date Section 4 : Shipment List Description System/Instrument

95

Chemical Forms of Uranium  

NLE Websites -- All DOE Office Websites (Extended Search)

such as water vapor in the air, the UF6 and water react, forming corrosive hydrogen fluoride (HF) and a uranium-fluoride compound called uranyl fluoride (UO2F2). For this reason,...

96

Registration Form PDF  

Science Conference Proceedings (OSTI)

City: State/Province: Zip/Postal Code: Country: Telephone: Fax: E-mail: adVaNCE REGiSTRaTioN FoRM advance Registration deadline: January 16, 2009. 8.

97

Page 8, Benefit Forms  

NLE Websites -- All DOE Office Websites (Extended Search)

- 154 Kb - Allows an employee to designate a beneficiary for unpaid compensation (e.g. salary, annual leave or awards). TSP-1 - Thrift Savings Plan Election Form (Thrift Savings...

98

EEO Intake Form  

Energy.gov (U.S. Department of Energy (DOE))

Download and fill out this form to start the process for Equal Employment Opportunity complaints at the Department of Energy. For more information about the EEO process, visit this site.

99

Nomination Form DEPARTMENT / UNIT  

E-Print Network (OSTI)

Nomination Form DEPARTMENT / UNIT: CAMPUS ADDRESS: CLASSIFICATION / TITLE: DEPARTMENT EMAIL ADDRESS: DEPARTMENT TELEPHONE: 2011 FRANKLIN STAFF SERVICE AWARDS START DATE IN DEPARTMENT / UNIT: ACTUAL NUMBER MEMBER DEADLINE: FRIDAY MARCH 4, 2011 ADDITIONAL COMMENTS: Signature of Head / Director of Nominee's Unit

Arnold, Jonathan

100

Nomination Form DEPARTMENT / UNIT  

E-Print Network (OSTI)

Nomination Form DEPARTMENT / UNIT: CAMPUS ADDRESS: CLASSIFICATION / TITLE: DEPARTMENT EMAIL ADDRESS: DEPARTMENT TELEPHONE: 2013 FRANKLIN STAFF SERVICE AWARDS START DATE IN DEPARTMENT / UNIT: ACTUAL NUMBER MEMBER DEADLINE: MARCH 5, 2013 ADDITIONAL COMMENTS: Signature of Head / Director of Nominee's Unit

Arnold, Jonathan

Note: This page contains sample records for the topic "form eia-920 combined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Nomination Form DEPARTMENT / UNIT  

E-Print Network (OSTI)

Nomination Form DEPARTMENT / UNIT: CAMPUS ADDRESS: CLASSIFICATION / TITLE: DEPARTMENT EMAIL ADDRESS: DEPARTMENT TELEPHONE: 2012 FRANKLIN STAFF SERVICE AWARDS START DATE IN DEPARTMENT / UNIT: ACTUAL NUMBER MEMBER DEADLINE: FRIDAY MARCH 2, 2012 ADDITIONAL COMMENTS: Signature of Head / Director of Nominee's Unit

Arnold, Jonathan

102

Nomination Form DEPARTMENT / UNIT  

E-Print Network (OSTI)

Nomination Form DEPARTMENT / UNIT: CAMPUS ADDRESS: CLASSIFICATION / TITLE: DEPARTMENT EMAIL ADDRESS: DEPARTMENT TELEPHONE: 2014 FRANKLIN STAFF SERVICE AWARDS START DATE IN DEPARTMENT / UNIT: ACTUAL NUMBER MEMBER DEADLINE: MARCH 7, 2014 ADDITIONAL COMMENTS: Signature of Head / Director of Nominee's Unit

Arnold, Jonathan

103

Form EIA-861 Instructions  

U.S. Energy Information Administration (EIA) Indexed Site

ANNUAL ELECTRIC POWER ANNUAL ELECTRIC POWER INDUSTRY REPORT INSTRUCTIONS FORM EIA-861 OMB No. 1905-0129 Approval Expires: 12/31/2015 Burden: 9.0 hrs PURPOSE Form EIA-861 collects information on the status of electric power industry participants involved in the generation, transmission, and distribution of electric energy in the United States, its territories, and Puerto Rico. The data from this form are used to accurately maintain the EIA list of electric utilities, to draw samples for other electric power surveys, and to provide input for the following EIA reports: Electric Power Monthly, Monthly Energy Review, Electric Power Annual, Annual Energy Outlook, and Annual Energy Review. The data collected on this form are used to monitor the current status and trends of the electric power industry and to evaluate the future

104

Klystron-linac combination  

DOE Patents (OSTI)

A combination klystron-linear accelerator which utilizes anti-bunch electrons generated in the klystron section as a source of electrons to be accelerated in the accelerator section. Electron beam current is controlled by second harmonic bunching, constrictor aperture size and magnetic focusing. Rf coupling is achieved by internal and external coupling.

Stein, W.E.

1980-04-24T23:59:59.000Z

105

Chemistry of combined residual chlorination  

DOE Green Energy (OSTI)

The decay of the combined chlorine residual was investigated in this work. Recent concerns about the formation of undesirable compounds such as chloroform with free residual chlorination have focused attention on the alternative use of combined residual chlorination. This work investigates the applicability of reactions proposed to describe the transformations and decay of the combined residual with time. Sodium hypochlorite was added to buffered solutions of ammonia with the chlorine residual being monitored over periods extending up to 10 days. The reaction was studied at four initial concentrations of hypochlorite of 100, 50, 25 and 10 mg/L as Cl/sub 2/ with molar application ratios of chlorine to ammonia, defined herein as M ratios, of 0.90, 0.50, 0.25 and 0.05 at each hypochlorite dose. Sixty-eight experiments were conducted at the pH of 6.6 and 7.2. The conclusions are: (1) in the absence of free chlorine, the concentration of NH/sub 3/ does not seem to affect the rate of disappearance of the residual other than through the formation of NHCl/sub 2/ by NH/sub 2/Cl hydrolysis; (2) the reaction between NHCl/sub 2/ and NH/sub 4//sup +/ to form NH/sub 2/Cl is either much slower than reported by Gray et. al. or the mechanism is different with a rate limiting step not involving NH/sub 3/ or NH/sub 4//sup +/; (3) a redox reaction in addition to the first-order decomposition of NHCl/sub 2/ appears necessary. Model simulation results indicated that a reaction of the type NH/sub 2/Cl + NHCl/sub 2/ ..-->.. P added to the first-order NHCl/sub 2/ decomposition can explain the results observed except at the higher chlorine doses.

Leao, S.F.; Selleck, R.E.

1982-01-01T23:59:59.000Z

106

Technology Transfer Reporting Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

form is to be completed by the TTO for individual inquiry/case activity during the quarter as required form is to be completed by the TTO for individual inquiry/case activity during the quarter as required by the Technology Transfer Commercialization Act of 2000. Mouse over definitions and descriptions appear over text/check boxes where appropriate. After completing this form, click on the submit button. *If you have no TTO activity for the quarter, please fill in your name, FY and quarter, lab or facility and check the box "No Quarterly Activity". Initial Ombuds Contact: ____________________ Type: Inquiry Case Ombuds Name: __________________________ Time Spent: (Hours) ______________ Final Ombuds Involvement: _________________ Laboratory or Facility: AMES ANL BNL LBNL INL KCP LANL NREL LLNL NBL NETL PNNL NNSS ORNL PXSO SRNL

107

User Financial Account Form  

NLE Websites -- All DOE Office Websites (Extended Search)

URA REVISED 2/20/13 URA REVISED 2/20/13 User Financial Account Form Establish a user financial account at SLAC to procure gases, chemicals, supplies or services to support your experiment at SLAC's user facilities and to send samples, dewars, or other equipment between SLAC and your institution. To open or renew your SLAC user financial account, complete and submit this form along with a Purchase Order (PO) from your institution. The PO should be made to SLAC National Accelerator Laboratory for the amount of estimated expenditures (the suggested minimum is $1,000). Send this form with the PO (or a letter from the financial officer of your institution) to: Jackie Kerlegan (SSRL) or Theresa Wong (LCLS) User Research Administration, MS 99 User Research Administration, MS 99 SLAC National Accelerator Laboratory

108

Travel Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Lodging Lodging Transportation SNAP COLLABORATION MEETING JUNE 1 - 3, 2006 TRAVEL FUNDING REQUEST FORM If you require Travel funding support from LBNL to attend the SNAP Collaboration Meeting, please fill out the travel request form below and click on the "SEND" button. As an alternative, you can simply email the requested information on the form to snap@lbl.gov Deadline: Please submit your request NLT Wednesday, May 10, 2006. Disclaimer: Please note that the submission of this request does not automatically constitute funding approval. 1. First Name Last Name 2. Has this travel funding support been pre-approved by the SNAP management? Yes No 3. If answer to #2 is "Yes": a) Approval by whom? b) What was the maximum reimbursement amount from SNAP?

109

Secretarial Award Nomination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Secretary's Awards Program Nomination Form Secretary's Awards Program Nomination Form 1. Type of Award (Check Applicable Box) Secretary's Honor Awards Secretary's Departure Awards Secretary's James R. Schlesinger Award Exceptional Service Award Appreciation Award Excellence Award Distinguished Service Award Achievement Award Meritorious Service Award 2. Nominee (Full) Name Check if Group list is attached (As it is to appear on the certificate) For Departure and Appreciation Awards Only 3. Certificate Date 4. Award Presentation Date 5. Current Position Title 6. Award Justification: Continue on blank sheet of paper and attach if you need more space. 7. Award Citation: A citation of no more than 20 lines must be attached to nomination form. 8 . Requesting Office : 9a. Local Approvals: One or more signatures is typical but not required

110

Research Input Form  

NLE Websites -- All DOE Office Websites (Extended Search)

HighlightsSubmit HighlightsSubmit Form Submit a New Research Highlight Sort Highlights Submitter Title Research Area Working Group Submission Date DOE Progress Reports Notable Research Findings for 2001-2006 Biological and Environmental Research Abstracts Database Research Highlights Summaries Research Highlight Submittal Form Tell us about your research! This form is designed to collect summary information about working group research results. If you have any questions or comments, please contact the administrators. Journal or Book Reference(s) (if applicable): Look Up Your reference from the Publications Database. Limit two references. If you have not submitted the references, please Add it now. Area of Research: Radiation Processes Cloud Distributions/Characterizations Surface Properties General Circulation and Single Column

111

DOE FOIA Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Administration FOIA Request Form Administration FOIA Request Form To make an Electronic FOIA (E-FOIA) request, please provide the information below. Failure to enter accurate and complete information may render your FOIA request impossible to fulfill. * Requests submitted under the Privacy Act must be signed and, therefore, cannot be submitted on this form. Name: (Required) Organization: Address: (Required) Phone: FAX: Email: Reasonably Describe Records Describe the specific record (s) you seek with sufficient detail that a knowledgeable official of the activity may locate the record with a reasonable amount of effort. Such detail should include: dates, titles, file designations, and offices to be searched. Since most DOE records are not retained permanently, the more information that you provide, the better the opportunity there is to determine if the

112

Compute Reservation Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Queue Look Queue Wait Times Hopper Queues and Policies Edison Queues and Policies Carver Queues and Policies Dirac Queues and Policies Compute Reservation Request Form Job Logs & Analytics Training & Tutorials Software Accounts & Allocations Policies Data Analytics & Visualization Data Management Policies Science Gateways User Surveys NERSC Users Group User Announcements Help Operations for: Passwords & Off-Hours Status 1-800-66-NERSC, option 1 or 510-486-6821 Account Support https://nim.nersc.gov accounts@nersc.gov 1-800-66-NERSC, option 2 or 510-486-8612 Consulting http://help.nersc.gov consult@nersc.gov 1-800-66-NERSC, option 3 or 510-486-8611 Home » For Users » Queues and Scheduling » Compute Reservation Request Form Compute Reservation Request Form

113

Document Control Template-Form  

NLE Websites -- All DOE Office Websites (Extended Search)

5ADocument Control Template - ExcelForm EOTA - Business Form Document Title: P-001, Document Control Process Document Number: Document Control Template - Excel Form EOTA...

114

Document Control Template-Form  

NLE Websites -- All DOE Office Websites (Extended Search)

4Document Control Template - Form 110815.doc 110815 Page 1 of 5 EOTA - Business Form Document Title: Document Control Template - Form Document Number: F-004 Rev. 110815...

115

Detecting alien life forms  

NLE Websites -- All DOE Office Websites (Extended Search)

Detecting alien life forms Detecting alien life forms Name: Brian S Foster Status: N/A Age: N/A Location: N/A Country: N/A Date: N/A Question: What would you do to find out if there is any life form on other planets? Replies: If you mean intelligent life, probably the best way would be to listen for radio messages, since you could do this from very far away. Earth emits as much radio energy as a small star --- very noticeable. If you mean just any kind of life it gets harder and you would have to send a robot or human in a spacecraft to visit. You could then look for the absorption of reflected light by oxygen molecules in the atmosphere. Oxygen is such a reactive molecule that it can only stay in the atmosphere if it is continually replenished by something, such as plants photosynthesizing. We cannot of course know that other life will build itself as does life on Earth, out of carbon-containing molecules which are formed by cracking apart carbon dioxide molecules with light energy (releasing oxygen). So the only sure way would probably be to land on the planet and look around. And even then you might well miss something

116

Clean Metal Spray Forming  

Science Conference Proceedings (OSTI)

controlled transfer of liquid metal from the ESR pool to the spray forming system is performed using a ... heating to maintain superheat and avoid freezing of the liquid metal as it flows through the funnel. ... As is the case with all similar cross-.

117

Tour Reservation Form  

Science Conference Proceedings (OSTI)

TOUR ORDER FORM. Tour Date. Time. Cost. # of Tickets. Total Cost. #1. Sunday 2/9. 1:00 PM - 5:30 PM. $24.00. #2. Monday 2/10. 9:00 AM - 12:30 PM. $9.00.

118

Nomination Form DEPARTMENT / UNIT  

E-Print Network (OSTI)

Nomination Form DEPARTMENT / UNIT: CAMPUS ADDRESS: JOB TITLE: DEPARTMENT EMAIL ADDRESS: DEPARTMENT TELEPHONE: 2014 FRANKLIN STAFF EXCELLENCE AWARDS START DATE IN DEPARTMENT / UNIT: Nominee Information NAME / RESEARCHPROFESSIONAL Signature of Head / Director of Nominee's Unit: NOMINATION PACKET DEADLINE: MARCH 7, 2014 PLEASE

Arnold, Jonathan

119

Nomination Form DEPARTMENT / UNIT  

E-Print Network (OSTI)

Nomination Form DEPARTMENT / UNIT: CAMPUS ADDRESS: JOB TITLE: DEPARTMENT EMAIL ADDRESS: DEPARTMENT TELEPHONE: 2012 FRANKLIN STAFF EXCELLENCE AWARDS START DATE IN DEPARTMENT / UNIT: Nominee Information NAME / RESEARCHPROFESSIONAL Signature of Head / Director of Nominee's Unit: NOMINATION PACKET DEADLINE: FRIDAY MARCH 2, 2012

Arnold, Jonathan

120

Nomination Form DEPARTMENT / UNIT  

E-Print Network (OSTI)

Nomination Form DEPARTMENT / UNIT: CAMPUS ADDRESS: JOB TITLE: DEPARTMENT EMAIL ADDRESS: DEPARTMENT TELEPHONE: 2011 FRANKLIN STAFF EXCELLENCE AWARDS START DATE IN DEPARTMENT / UNIT: Nominee Information NAME / RESEARCHPROFESSIONAL Signature of Head / Director of Nominee's Unit: NOMINATION PACKET DEADLINE: FRIDAY MARCH 4, 2011

Arnold, Jonathan

Note: This page contains sample records for the topic "form eia-920 combined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Nomination Form DEPARTMENT / UNIT  

E-Print Network (OSTI)

Nomination Form DEPARTMENT / UNIT: CAMPUS ADDRESS: JOB TITLE: DEPARTMENT EMAIL ADDRESS: DEPARTMENT TELEPHONE: 2013 FRANKLIN STAFF EXCELLENCE AWARDS START DATE IN DEPARTMENT / UNIT: Nominee Information NAME / RESEARCHPROFESSIONAL Signature of Head / Director of Nominee's Unit: NOMINATION PACKET DEADLINE: MARCH 5, 2013 PLEASE

Arnold, Jonathan

122

Form EIA-871A  

U.S. Energy Information Administration (EIA) Indexed Site

Approval Approval OMB No.: 1905-0145 Expires: 11/30/2002 Form EIA-871A U.S. Department of Energy Commercial Buildings Energy Consumption Survey for 1999 BUILDING QUESTIONNAIRE TABLE OF CONTENTS About This Questionnaire ...................................................................................................... 3 Section A. Building Size and Age Square Footage .................................................................................................... 5 Floors .................................................................................................................... 8 Year Constructed .................................................................................................. 9 Section B. Principal Building Activity

123

Dry lubricant films for aluminum forming.  

DOE Green Energy (OSTI)

During metal forming process, lubricants are crucial to prevent direct contact, adhesion, transfer and scuffing of workpiece materials and tools. Boric acid films can be firmly adhered to the clean aluminum surfaces by spraying their methanol solutions and provide extremely low friction coefficient (about 0.04). The cohesion strengths of the bonded films vary with the types of aluminum alloys (6061, 6111 and 5754). The sheet metal forming tests indicate that boric acid films and the combined films of boric acid and mineral oil can create larger strains than the commercial liquid and solid lubricants, showing that they possess excellent lubricities for aluminum forming. SEM analyses indicate that boric acid dry films separate the workpiece and die materials, and prevent their direct contact and preserve their surface qualities. Since boric acid is non-toxic and easily removed by water, it can be expected that boric acid films are environmentally friendly, cost effective and very efficient lubricants for sheet aluminum cold forming.

Wei, J.; Erdemir, A.; Fenske, G. R.

1999-03-30T23:59:59.000Z

124

STANDARD FORM NO. 64  

Office of Legacy Management (LM)

/qz-5 /qz-5 STANDARD FORM NO. 64 rl . . .' . , G Ojice Memoawl crl LA STATES GOVER pi,+ ip; ; / (' , TO : F. M . Belmore, M remtor, Produution Division DATE: Deomnber FROM : R. F. Van Wy TV Mvision of Teohnioal Advisers SUBJECT: R?IQUEST FOR&m SYMBOL: TA:RFV:rle For use under ooxrkraot AT-300l=Gen-72 at Columibia University, m request 6 pieoes Of A toleranoe of plus ordinary uranium out to the sizes listed below. or llliZlU8 l/16" i8 sati8faotory. P x 1u x 1" 1" x 1 !k x 1" tixl x1" 3P 4 x 12 x 1" ororr-se&ion of l;% x 1" are reque8ted, rq~are to 2" square are aomptable. Please 1. 1. Havena, Pupin Phy8ioe Laboratory, Columbia University, New York City. 2 pieoerr 2 piece8 2 pieoea 2 pieces Although pieces with a

125

Fermilab Today - Announcements Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Announcements Form Announcements Form Subscribe | Contact Us | Archive | Classifieds | Guidelines | Help Search GO Fermilab Announcements policy Announcements must be submitted no later than 12 p.m. (noon) the day before the desired run date. Last-minute announcements will be considered on a case-by-case basis. To place an urgent announcement into Fermilab Today, please contact the Office of Communication at (630) 840-3351. Announcements will run from the time they are submitted until the selected expiration date, which may be no later than one month after the submission date. Anyone who would like to run his or her announcement for longer than one month will need to resubmit the announcement after the first submission expires. Fermilab Today staff will feature as many headlines as space permits in Fermilab Today and link to the announcements on the Announcements webpage.

126

2008 Form 3468  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

545-0155 545-0155 Investment Credit Form 3468 ᮣ Attach to your tax return. See instructions. Attachment Sequence No. 52 Identifying number Name(s) shown on return 1 For Paperwork Reduction Act Notice, see instructions. Form 3468 (2008) c × 30% (.30) × 30% (.30) 5 Cat. No. 12276E If you are claiming the investment credit as a lessee based on a section 48(d) (as in effect on November 4, 1990) election, provide the following information. If you acquired more than one property as a lessee, attach a statement showing the information below. (99) Name of lessor $ $ b $ $ Department of the Treasury Internal Revenue Service 2 5a 5b 5c × $1,000 5d 5e × 30% (.30) × $3,000 Kilowatt capacity of property in f above ᮣ g h Enter the lesser of line 5f or 5g 3 4 2008

127

Publication Submission Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Pages Pages publicationsubmission Sign In Launch the Developer Dashboard SLAC National Accelerator Laboratory DOE | Stanford | SLAC | SSRL | LCLS | AD | PPA | Photon Science | PULSE | SIMES LCLS : Linac Coherent Light Source An Office of Science User Facility Search this site... Search Help (new window) Top Link Bar LCLS Lasers Expand Lasers LCLS Quick Launch Home About LCLS Expand About LCLS LCLS News Expand LCLS News User Resources Expand User Resources Instruments Expand Instruments Proposals Publications Expand Publications Schedules Machine Status Machine FAQs Safety Organization Expand Organization Directories Expand Directories Staff Resources Contact Us All Site Content Department of Energy Page Content Publication Submission Form Th Tell LCLS about new publications Please submit this form to notify LCLS about new publications relating to

128

SAFETY SHOE ISSUANCE FORM  

NLE Websites -- All DOE Office Websites (Extended Search)

SAFETY SHOE ISSUANCE FORM SAFETY SHOE ISSUANCE FORM The employee named below is authorized to purchase one pair of protective footwear, rated by ASTM F 2413-05 (or ANSI Z41-1999) to protect against workplace hazards. The Laboratory will subsidize this protective footwear issuance up to the authorized annual limit of $150.00. □ The employee named below is authorized to purchase one pair of fatigue reducing shoe insoles. The Laboratory will subsidize this shoe insole issuance up to the authorized annual limit of $35.00. Note: Box must be checked to indicate supervisor approval of the purchase of fatigue reducing shoe insoles. Employee Name:__________________________ Project ID Number:__________ Employee ID Number:______________________ Payroll Deduction:___________

129

Structural load combinations  

SciTech Connect

This paper presents the latest results of the program entitled, ''Probability Based Load Combinations For Design of Category I Structures''. In FY 85, a probability-based reliability analysis method has been developed to evaluate safety of shear wall structures. The shear walls are analyzed using stick models with beam elements and may be subjected to dead load, live load and in-plane eqrthquake. Both shear and flexure limit states are defined analytically. The limit state probabilities can be evaluated on the basis of these limit states. Utilizing the reliability analysis method mentioned above, load combinations for the design of shear wall structures have been established. The proposed design criteria are in the load and resistance factor design (LRFD) format. In this study, the resistance factors for shear and flexure and load factors for dead and live loads are preassigned, while the load factor for SSE is determined for a specified target limit state probability of 1.0 x 10/sup -6/ or 1.0 x 10/sup -5/ during a lifetime of 40 years. 23 refs., 9 tabs.

Hwang, H.; Reich, M.; Ellingwood, B.; Shinozuka, M.

1985-01-01T23:59:59.000Z

130

ORPS User Registration Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DEPARTMENT OF ENERGY DEPARTMENT OF ENERGY OPERATIONAL EVENT INFORMATION SYSTEMS REGISTRATION FORM User Registration For: ORPS SUBMIT TO: U.S. DOE: PHONE: 800-473-4375 HSS InfoCenter, HS-1.22, 270CC FAX: 301-903-9823 1000 Independence Ave., SW Washington, DC 20585-0270 (Type or Print) 1. Name__________________________________________________________________________Birth date_______/_______ (Last) (First) (Middle Initial) (Month) (Day) 2.JobTitle_______________________________________________________________________________________________ 3. Company Name________________________________________________________________________________________ 4. Address________________________________________________ Mail Stop______________________________________

131

How do viruses form?  

NLE Websites -- All DOE Office Websites (Extended Search)

How do viruses form? How do viruses form? Name: street Location: N/A Country: N/A Date: N/A Question: How do viruses form? Replies: Well, I'll assume you mean how they replicate, since they do not (as far as we know) arise from inorganic materials. Viruses are generally thought of as obligate parasites -- that is, they need the assistance of another organism for their survival. Depending on the type of virus you're looking at you'll see many different ways of accomplishing the same goal -- reproduction. In very general terms, then, a virus will attach itself to an appropriate host cell and insert it's genetic code into the DNA of the host, which then goes thorough it's normal routine of reading through its own code to synthesize proteins and enzymes, and in the process inadvertently replicates the strand of viral DNA (or RNA, depending), which codes for its own proteins and concentrates within the cell. At some point, the cell will not be able to support that many viral particles within it's membrane, and it will die, releasing thousands of new viral particles into the environment to do the dirty deed all over again.

132

Spray-formed tooling and aluminum strip  

SciTech Connect

Spray forming is an advanced materials processing technology that converts a bulk liquid metal to a near-net-shape solid by depositing atomized droplets onto a suitably shaped substrate. By combining rapid solidification processing with product shape control, spray forming can reduce manufacturing costs while improving product quality. De Laval nozzles offer an alternative method to the more conventional spray nozzle designs. Two applications are described: high-volume production of aluminum alloy strip, and the production of specialized tooling, such as injection molds and dies, for rapid prototyping.

McHugh, K.M.

1995-11-01T23:59:59.000Z

133

Superconducting combined function magnets  

SciTech Connect

Superconducting accelerators and storage rings, presently under construction or in the design phase, are based on separate dipole and quadrupole magnets. It is here suggested that a hybrid lattice configuration consisting of dipoles and combined function gradient magnets would: (1) reduce the number of magnet units and their total cost; and (2) increase the filling factor and thus the energy at a given field. Coil cross sections are presented for the example of the Brookhaven Colliding Beam Accelerator. An asymmetric two-layer cable gradient magnet would have transfer functions of 10.42 G/A and 0.628 G cm/sup -1//A versus 15.77 G/A and 2.03 G cm/sup -1//A of the present separate dipoles and quadrupoles.

Hahn, H.; Fernow, R.C.

1983-01-01T23:59:59.000Z

134

Easley Combined Utility System | Open Energy Information  

Open Energy Info (EERE)

Easley Combined Utility System Easley Combined Utility System Jump to: navigation, search Name Easley Combined Utility System Place South Carolina Utility Id 6709 Utility Location Yes Ownership M NERC Location SERC NERC SERC Yes Operates Generating Plant Yes Activity Generation Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Church electric service rate (Inside city limits) Commercial Church electric service rate (Outside city limits) Commercial Residential service rate (Inside city limits) Residential Residential service rate (Outside city limits) Residential

135

FORM EIA-846(F)  

U.S. Energy Information Administration (EIA) Indexed Site

No. 1905-0169: Approval Expires March 31,1989 No. 1905-0169: Approval Expires March 31,1989 FORM EIA-846(F) (6-S-86) U.S. DEPARTMENT OF COMMERCE .(djSS^X BUREAU OF THE CENSUS ^p^TlJ^v ACTING AS COLLECTING AND COMPILING AGENT FOR / NOTICE - Response to this inquiry is required by lew (Federal Energy Administration Act of 1 974, as amended, P.L. 93-275). By Section 9 of Title 1 3, U.S. Code, your report to the Census Bureau is

136

SSRL29 Abstract Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Users are invited to submit abstracts highlighting research activities conducted over the past year at SSRL for oral or poster presentation at the meeting. Posters will be displayed throughout the meeting and will be highlighted during a poster session and reception on Monday, October 7. Graduate students submitting posters must also register for the Users' Meeting and are eligible for one of the poster prizes. All posters require submission of this form no later than September 23 to guarantee space and inclusion in the program materials. Users are invited to submit abstracts highlighting research activities conducted over the past year at SSRL for oral or poster presentation at the meeting. Posters will be displayed throughout the meeting and will be highlighted during a poster session and reception on Monday, October 7. Graduate students submitting posters must also register for the Users' Meeting and are eligible for one of the poster prizes. All posters require submission of this form no later than September 23 to guarantee space and inclusion in the program materials. Please Note: Fields marked with require entry. General Presentation Information Please select a presentation type: Oral Presentation Poster Presentation Invited Presentation: Users' Meeting Invited Presentation: Workshop Speaker

137

Combined Diagram: A Graphical Representation of Combination Evaporation Rates  

Science Conference Proceedings (OSTI)

Combination methods estimate the partition of sensible and latent heat fluxes at the surface by combining the surface energy balance equation with the transfer equations for temperature and water vapor in the atmospheric surface layer. This paper ...

Ricardo C. Muñoz

2012-08-01T23:59:59.000Z

138

Biomass Gasification Combined Cycle  

DOE Green Energy (OSTI)

Gasification combined cycle continues to represent an important defining technology area for the forest products industry. The ''Forest Products Gasification Initiative'', organized under the Industry's Agenda 2020 technology vision and supported by the DOE ''Industries of the Future'' program, is well positioned to guide these technologies to commercial success within a five-to ten-year timeframe given supportive federal budgets and public policy. Commercial success will result in significant environmental and renewable energy goals that are shared by the Industry and the Nation. The Battelle/FERCO LIVG technology, which is the technology of choice for the application reported here, remains of high interest due to characteristics that make it well suited for integration with the infrastructure of a pulp production facility. The capital cost, operating economics and long-term demonstration of this technology area key input to future economically sustainable projects and must be verified by the 200 BDT/day demonstration facility currently operating in Burlington, Vermont. The New Bern application that was the initial objective of this project is not currently economically viable and will not be implemented at this time due to several changes at and around the mill which have occurred since the inception of the project in 1995. The analysis shows that for this technology, and likely other gasification technologies as well, the first few installations will require unique circumstances, or supportive public policies, or both to attract host sites and investors.

Judith A. Kieffer

2000-07-01T23:59:59.000Z

139

FORM EIA-846C  

U.S. Energy Information Administration (EIA) Indexed Site

No. 1905-0169: Approval Expires 04/30/91 No. 1905-0169: Approval Expires 04/30/91 FORM EIA-846C (5-1 89) U.S. DEPARTMENT Of COMMERCE BUREAU OF THE CENSUS ACTING AS COLLECTING AND COMPILING AGENT FOR UNITED STATES DEPARTMENT OF ENERGY ENERGY INFORMATION ADMINISTRATION Public reporting burden for this collection of information is estimated to average 8 hours per response, including the time of reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to the Energy Information Administration, Office of Statistical Standards, El-73, Mail Station: 1H-023 Forrestal, 1000 Independence Avenue, SW, Washington, DC 20485; and to the Office of Information and

140

Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

t t Categorical Exclusion Determination Form Proposed Action Title: (0471-1563) University of South Florida - Development of a Low Cost Thermal Energy Storage System Using Phase Change Materials with Enhanced Radiation Heat Transfer Program or Field Office: Advanced Research Projects Agency - Energy Location(s) (City/County/State): Tampa, FL Proposed Action Description: Funding will support development of low cost, industrially scalable capsules containing high-temperature phase change materials (PCMs) for use in thermal energy storage (TES) systems to enable continuous power supply from concentrated solar thermal and nuclear power plants. No nuclear research and development activities will take place under this project. ARPA-E has undertaken a review of the work to be performed

Note: This page contains sample records for the topic "form eia-920 combined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

EOTA … Business Form  

NLE Websites -- All DOE Office Websites (Extended Search)

ISDF 042 Validation and Acceptance 11_0414 Page 1 of 4 ISDF 042 Validation and Acceptance 11_0414 Page 1 of 4 EOTA - Business Form Document Title: Validation and Acceptance Document Number: ISDF -042 Rev. 11_0414 Document Owner: Vickie Pleau Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: ISDP-002 Training Production Process Notify of Changes: MGT, ISD, QAM Referenced Document(s): ISDF-010 After Action Report ISDF 042 Validation and Acceptance 11_0414 Page 2 of 4 Revision History: Rev . Description of Change 10_0630 Initial Release 11_0414 Deleted FMT final Course Acceptance block ISDF 042 Validation and Acceptance 11_0414 Page 3 of 4 Course Validation and Acceptance Validation denotes the product meets customer operational expectations in the medium which it

142

EOTA … Business Form  

NLE Websites -- All DOE Office Websites (Extended Search)

4 New Employee Checklist 10_0806.docx Page 1 of 5 4 New Employee Checklist 10_0806.docx Page 1 of 5 EOTA - Business Form Document Title: New Employee Checklist Document Number: MGTF-004 Rev. 10_0806 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: MGTP-002, Skill Set / Training Process Notify of Changes: EOTA Managers Referenced Document(s): N/A MGTF-004 New Employee Checklist 10_0806.docx Page 2 of 5 Revision History: Rev. Description of Change A Initial Release B Changes made 2/28/08 08_0411 Added New Hire Orientation Course to checklist, added guidance for completion of checklist 09_0409 Updated "Responsible Person" on checklist. 09_0421 Added "Initiate/Update U.S. Access profile" as a new FMT responsibility. Renumbered checklist items.

143

SSRL28 Registration Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Need more information? Contact: Cathy Knotts Manager, URA SSRL, MS 99 2575 Sand Hill Road Menlo Park, CA 94025 28th Annual Stanford Synchrotron Radiation Laboratory Users' Meeting Menlo Park, California USA October 17-19, 2001 Registration Form -- CLOSED -- Full Name: Institution: Address: City: State: Zip Code: Country: Phone: Fax: E-mail: Citizenship: Registration: The Registration fee includes meeting materials, invited talks, poster presentations, and vendor exhibits. Registration ($150) Student Registration ($50) Users' Mtg. Invited Speaker Workshop Only (click here & see below) Meals and Social Events: Please specify quantity of tickets desired and if vegetarian meal preferred. Select 1-Regular 1-Vegetarian 2-Regular 2-Vegetarian 2-(1 of each) Lunch, Oct. 18 ($8 per person)

144

Form EIA-851Q  

U.S. Energy Information Administration (EIA) Indexed Site

ITEM 1: FACILITY INFORMATION ITEM 1: FACILITY INFORMATION Name: County: State: Owner: Type: Rated Capacity: Operating Status: ITEM 2: PRODUCTION Pounds U 3 O 8 October-2013 November-2013 December-2013 Total = 0.0 ITEM 3: PRODUCTION SOURCE Mine name(s) Pounds U 3 O 8 Other type: Pounds U 3 O 8 Total = 0.0 COMMENTS All other information you provide will be used for statistical purposes only. In accordance with the Confidential Information Protection provisions of Title V, Subtitle A of Public Law 107-347 and other applicable Federal laws, your responses will be kept confidential and will not be disclosed in identifiable form to anyone other than employees or agents without your consent. By law, every EIA employee, as well as every agent, is subject to a jail term, a fine of up to $250,000, or both if he or she discloses ANY identifiable

145

Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ergy ergy Categorical Exclusion Determination Form Proposed Action Title: (0472-1569) G~tomics - Double Sator Switched Reluctance Motor (DSSRM) Technology Progi'am or Field Office: Advanced Research Projects Agency - Energy Location(s) (City/County/State): San Diego, CA Proposed Action Description: General Atomics, in conjunction with the University of Texas-Dallas (UT Dallas), proposes to develop double-stator switched reluctance motor (DSSRM) for electric vehicles (EVs) that will eliminate the use of permanent magnet-based motors that rely on rare earth metals in EVs. General Atomics' application was selected for an initial 18-month period (Phase 1) of funding. The ARPA-E Program Director may decide to negotiate and fund project activities for an additional 18-month period (Phase II) after evaluating the work performed in Phase I. ARPA-E has not obligated

146

Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

y y Categorical Exclusion Determination Form Proposed Action Title: (0471-1595) Regents of the University of Minnesota - Thermal Fuel: Solar Fuels via Partial Redox Cycles with Heat Recovery Program or Field Office: Advanced Research Projects Agency - Energy LocationCs) CCity/County/State): Minnesota, California, and Colorado. Proposed Action Description: Funding will support development of a dual zone solar thermochemical reactor to produce fuel using ceria-based reactive materials in partial redox cycles and high heat recovery levels through counter-circulation of solid state components. Proposed work consists of indoor laboratory-based research and development, including: (1) designing, fabricating, and characterizing an optimized ceria-based reactive element for use in the reactor to enable maximum fuel productivity and durability; (2) designing and fabricating a

147

Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

n rgy n rgy Categorical Exclusion Determination Form Proposed Action Title: (0474-1555) University of Colorado - Boulder - Wafer-Level Sub-Module Integrated DCfDC Converter Program or Field Office: Advanced Research Projects Agency - Energy LocationCs) CCity/County/State): Colorado, Maine, Virginia Proposed Action Description: Funding will support development of a planar, wafer-level sub-module integrated converter (SubMIC) device that can be integrated into various types of photovoltaic (PV) modules to enable low-cost maximum power point tracking at high power processing efficiencies. Proposed work consists of indoor laboratory-based research and development (R&D), microfabrication activities, and analytical research, including: (1) simulated modeling and design of SubMIC components and integrated units, (2) development, fabrication, testing, and optimization

148

EOTA … Business Form  

NLE Websites -- All DOE Office Websites (Extended Search)

1 Internal Audit Report 11_0304 Page 1 of 3 1 Internal Audit Report 11_0304 Page 1 of 3 EOTA - Business Form Document Title: Internal Audit Report Document Number: F-011 Rev. 11_0304 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: P-007, Internal Audit Process Notify of Changes: Internal Auditors Referenced Document(s): N/A F-011 Internal Audit Report 11_0304 Page 2 of 3 Revision History: Rev. Description of Change A Initial Release 08_0502 Added "(PAR or IO may be required)" to Opportunity for Improvement section. 11_0304 Added Recommendation and Action Item Area F-011 Internal Audit Report 11_0304 Internal Audit Report Audit #: Lead Auditor: Audit Date: Audit Team: Document # Audited: Standard / Criteria Used:

149

Form EIA-861 Instructions  

U.S. Energy Information Administration (EIA) Indexed Site

ANNUAL ELECTRIC POWER ANNUAL ELECTRIC POWER INDUSTRY REPORT Form EIA-861 OMB No. 1905-0129 Approval Expires: 12/31/2015 Burden: 9 Hours NOTICE: This report is mandatory under the Federal Energy Administration Act of 1974 (Public Law 93-275). Failure to comply may result in criminal fines, civil penalties and other sanctions as provided by law. For further information concerning sanctions and data protections see the provisions on sanctions and the provisions concerning the confidentiality of information in the instructions. Title 18 U.S.C. 1001 makes it a criminal offense for any person knowingly and willingly to make to any Agency or Department of the United States any false, fictitious, or fraudulent statements as to any matter within its jurisdiction.

150

Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

of n y of n y Categorical Exclusion Determination Form Proposed Action Title: (0471-1607) University of Florida - Solar Thermochemical Fuel Production via a Novel Low Pressure, Magnetically Stabilized, Non-Volatile Iron Oxide Looping Process Program or Field Office: Advanced Research Projects Agency - Energy LocationCs) CCity/County/State): Gainesville, FL Proposed Action Description: University of Florida proposes to develop a novel solar thermochemical reactor with inputs of water, recycled carbon dioxide (C02), and concentrated solar energy to cost-effectively produce Syngas, a renewable, carbon-neutral fuel. Project activities will include: (1) modeling, design, and fabrication of a high efficiency 1 OkW reactor prototype; (2) test analysis of bench-scale

151

New Employee Orientation- Forms Checklist  

Energy.gov (U.S. Department of Energy (DOE))

Listing of the forms to be issued and collected at a new employee's orientation. Please review the checklist to ensure that you bring all of the needed forms.

152

Radiation Safety Work Control Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Radiation Safety Work Control Form (see instructions on pg-2) Rev July-2012 Area: Form : Date: Preliminary Applicability Screen: (a) Will closing the beam line injection stoppers...

153

FAQs for Survey Form EIA-14  

Gasoline and Diesel Fuel Update (EIA)

Form EIA-14 Form EIA-14 What is the purpose of this survey? Form EIA-14, "Refiners' Monthly Cost Report" is designed to collect summary data regarding crude oil prices by Petroleum Administration for Defense Districts (PADDs). The data are used to provide the government and the public monthly prices on refiner acquisition cost of crude oil. How are my data used to publish Refiner Acquisition Cost of Crude Oil? Your data, total cost and total volume, is combined with the data of other respondents. The sum of the costs for data from all of the respondents is divided by the sum of the volumes to calculate the Refiner Acquisition Cost (RAC) of crude oil. The composite RAC is the average cost of both domestic and imported crude oil. Where can I find the published data?

154

Spray forming process for producing molds, dies and related tooling  

DOE Patents (OSTI)

A method for spray forming manufacturing of near-net-shape molds, dies and related toolings, wherein liquid material such as molten metal, metallic alloys, or polymers are atomized into fine droplets by a high temperature, high velocity gas and deposited onto a pattern. Quenching of the atomized droplets provides a heat sink, thereby allowing undercooled and partially solidified droplets to be formed in-flight. Composites can be formed by combining the atomized droplets with solid particles such as whiskers or fibers.

McHugh, Kevin M. (Idaho Falls, ID); Key, James F. (Idaho Falls, ID)

1998-01-01T23:59:59.000Z

155

Waste form product characteristics  

SciTech Connect

The Department of Energy has operated nuclear facilities at the Idaho National Engineering Laboratory (INEL) to support national interests for several decades. Since 1953, it has supported the development of technologies for the storage and reprocessing of spent nuclear fuels (SNF) and the resultant wastes. However, the 1992 decision to discontinue reprocessing of SNF has left nearly 768 MT of SNF in storage at the INEL with unspecified plans for future dispositioning. Past reprocessing of these fuels for uranium and other resource recovery has resulted in the production of 3800 M{sup 3} calcine and a total inventory of 7600 M{sup 3} of radioactive liquids (1900 M{sup 3} destined for immediate calcination and the remaining sodium-bearing waste requiring further treatment before calcination). These issues, along with increased environmental compliance within DOE and its contractors, mandate operation of current and future facilities in an environmentally responsible manner. This will require satisfactory resolution of spent fuel and waste disposal issues resulting from the past activities. A national policy which identifies requirements for the disposal of SNF and high level wastes (HLW) has been established by the Nuclear Waste Policy Act (NWPA) Sec.8,(b) para(3)) [1982]. The materials have to be conditioned or treated, then packaged for disposal while meeting US Environmental Protection Agency (EPA) and Nuclear Regulatory Commission (NRC) regulations. The spent fuel and HLW located at the INEL will have to be put into a form and package that meets these regulatory criteria. The emphasis of Idaho Chemical Processing Plant (ICPP) future operations has shifted toward investigating, testing, and selecting technologies to prepare current and future spent fuels and waste for final disposal. This preparation for disposal may include mechanical, physical and/or chemical processes, and may differ for each of the various fuels and wastes.

Taylor, L.L.; Shikashio, R.

1995-01-01T23:59:59.000Z

156

CRYSTALLINE CERAMIC WASTE FORMS: REFERENCE FORMULATION REPORT  

Science Conference Proceedings (OSTI)

The research conducted in this work package is aimed at taking advantage of the long term thermodynamic stability of crystalline ceramics to create more durable waste forms (as compared to high level waste glass) in order to reduce the reliance on engineered and natural barrier systems. Durable ceramic waste forms that incorporate a wide range of radionuclides have the potential to broaden the available disposal options and to lower the storage and disposal costs associated with advanced fuel cycles. Assemblages of several titanate phases have been successfully demonstrated to incorporate radioactive waste elements, and the multiphase nature of these materials allows them to accommodate variation in the waste composition. Recent work has shown that they can be successfully produced from a melting and crystallization process. The objective of this report is to explain the design of ceramic host systems culminating in a reference ceramic formulation for use in subsequent studies on process optimization and melt property data assessment in support of FY13 melter demonstration testing. The waste stream used as the basis for the development and testing is a combination of the projected Cs/Sr separated stream, the Trivalent Actinide - Lanthanide Separation by Phosphorous reagent Extraction from Aqueous Komplexes (TALSPEAK) waste stream consisting of lanthanide fission products, the transition metal fission product waste stream resulting from the transuranic extraction (TRUEX) process, and a high molybdenum concentration with relatively low noble metal concentrations. In addition to the combined CS/LN/TM High Mo waste stream, variants without Mo and without Mo and Zr were also evaluated. Based on the results of fabricating and characterizing several simulated ceramic waste forms, two reference ceramic waste form compositions are recommended in this report. The first composition targets the CS/LN/TM combined waste stream with and without Mo. The second composition targets with CS/LN/TM combined waste stream with Mo and Zr removed. Waste streams that contain Mo must be produced in reducing environments to avoid Cs-Mo oxide phase formation. Waste streams without Mo have the ability to be melt processed in air. A path forward for further optimizing the processing steps needed to form the targeted phase assemblages is outlined in this report. Processing modifications including melting in a reducing atmosphere, and controlled heat treatment schedules are anticipated to improve the targeted elemental partitioning.

Brinkman, K.; Fox, K.; Marra, J.

2012-05-15T23:59:59.000Z

157

A Novel in situ Trigger Combination Method  

Science Conference Proceedings (OSTI)

Searches for rare physics processes using particle detectors in high-luminosity colliding hadronic beam environments require the use of multi-level trigger systems to reject colossal background rates in real time. In analyses like the search for the Higgs boson, there is a need to maximize the signal acceptance by combining multiple different trigger chains when forming the offline data sample. In such statistically limited searches, datasets are often amassed over periods of several years, during which the trigger characteristics evolve and their performance can vary significantly. Reliable production cross-section measurements and upper limits must take into account a detailed understanding of the effective trigger inefficiency for every selected candidate event. We present as an example the complex situation of three trigger chains, based on missing energy and jet energy, to be combined in the context of the search for the Higgs (H) boson produced in association with a W boson at the Collider Detector at Fermilab (CDF). We briefly review the existing techniques for combining triggers, namely the inclusion, division, and exclusion methods. We introduce and describe a novel fourth in situ method whereby, for each candidate event, only the trigger chain with the highest a priori probability of selecting the event is considered. The in situ combination method has advantages of scalability to large numbers of differing trigger chains and of insensitivity to correlations between triggers. We compare the inclusion and in situ methods for signal event yields in the CDF WH search.

Buzatu, Adrian; Warburton, Andreas; /McGill U.; Krumnack, Nils; /Baylor U.; Yao, Wei-Ming; /LBL, Berkeley

2012-06-01T23:59:59.000Z

158

Innovative forming and fabrication technologies : new opportunities.  

Science Conference Proceedings (OSTI)

The advent of light metal alloys and advanced materials (polymer, composites, etc.) have brought the possibility of achieving important energy reductions into the full life cycle of these materials, especially in transportation applications. 1 These materials have gained acceptance in the aerospace industry but use of light metal alloys needs to gain wider acceptance in other commercial transportation areas. Among the main reasons for the relatively low use of these materials are the lack of manufacturability, insufficient mechanical properties, and increased material costs due to processing inefficiencies. Considering the enormous potential energy savings associated with the use of light metal alloys and advanced materials in transportation, there is a need to identify R&D opportunities in the fields of materials fabrication and forming aimed at developing materials with high specific mechanical properties combined with energy efficient processes and good manufacturability. This report presents a literature review of the most recent developments in the areas of fabrication and metal forming focusing principally on aluminum alloys. In the first section of the document, the different sheet manufacturing technologies including direct chill (DC) casting and rolling, spray forming, spray rolling, thin slab, and strip casting are reviewed. The second section of the document presents recent research on advanced forming processes. The various forming processes reviewed are: superplastic forming, electromagnetic forming, age forming, warm forming, hydroforming, and incremental forming. Optimization of conventional forming processes is also discussed. Potentially interesting light metal alloys for high structural efficiency including aluminum-scandium, aluminum-lithium, magnesium, titanium, and amorphous metal alloys are also reviewed. This section concludes with a discussion on alloy development for manufacturability. The third section of the document reviews the latest developments in fiber-reinforced composite materials. Emerging curing processes are presented along with a discussion on the possible developments in biocomposite materials. The fourth section presents recent developments in the fabrication of bulk nanomaterials and nanoparticles reinforced materials. Advanced joining technologies are presented in the fifth section. Future research is proposed in the last section.

Davis, B.; Hryn, J.; Energy Systems; Kingston Process Metallurgy, Inc.

2008-01-31T23:59:59.000Z

159

A Novel in situ Trigger Combination Method  

E-Print Network (OSTI)

Searches for rare physics processes using particle detectors in high-luminosity colliding hadronic beam environments require the use of multi-level trigger systems to reject colossal background rates in real time. In analyses like the search for the Higgs boson, there is a need to maximize the signal acceptance by combining multiple different trigger chains when forming the offline data sample. In such statistically limited searches, datasets are often amassed over periods of several years, during which the trigger characteristics evolve and their performance can vary significantly. Reliable production cross-section measurements and upper limits must take into account a detailed understanding of the effective trigger inefficiency for every selected candidate event. We present as an example the complex situation of three trigger chains, based on missing energy and jet energy, to be combined in the context of the search for the Higgs (H) boson produced in association with a W boson at the Collider Detector at F...

Buzatu, Adrian; Krumnack, Nils; Yao, Wei-Ming

2012-01-01T23:59:59.000Z

160

Baseline Glass Development for Combined Fission Products Waste Streams  

SciTech Connect

Borosilicate glass was selected as the baseline technology for immobilization of the Cs/Sr/Ba/Rb (Cs), lanthanide (Ln) and transition metal fission product (TM) waste steams as part of a cost benefit analysis study.[1] Vitrification of the combined waste streams have several advantages, minimization of the number of waste forms, a proven technology, and similarity to waste forms currently accepted for repository disposal. A joint study was undertaken by Pacific Northwest National Laboratory (PNNL) and Savannah River National Laboratory (SRNL) to develop acceptable glasses for the combined Cs + Ln + TM waste streams (Option 1) and Cs + Ln combined waste streams (Option 2) generated by the AFCI UREX+ set of processes. This study is aimed to develop baseline glasses for both combined waste stream options and identify key waste components and their impact on waste loading. The elemental compositions of the four-corners study were used along with the available separations data to determine the effect of burnup, decay, and separations variability on estimated waste stream compositions.[2-5] Two different components/scenarios were identified that could limit waste loading of the combined Cs + LN + TM waste streams, where as the combined Cs + LN waste stream has no single component that is perceived to limit waste loading. Combined Cs + LN waste stream in a glass waste form will most likely be limited by heat due to the high activity of Cs and Sr isotopes.

Crum, Jarrod V.; Billings, Amanda Y.; Lang, Jesse B.; Marra, James C.; Rodriguez, Carmen P.; Ryan, Joseph V.; Vienna, John D.

2009-06-29T23:59:59.000Z

Note: This page contains sample records for the topic "form eia-920 combined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

HEAVY BARYONS: A COMBINED LARGE Nc AND HEAVY QUARK EXPANSION FOR ELECTROWEAK CURRENTS  

E-Print Network (OSTI)

The combined large Nc and heavy quark limit for baryons containing a single heavy quark is discussed. The combined large Nc and heavy quark expansion of the heavy quark bilinear operators is obtained. In the combined expansion the corrections proportional to mN/mQ are summed to all orders. In particular, the combined expansion can be used to determine semileptonic form factors of heavy baryons in the combined limit. 1

Boris A. Gelman

2002-01-01T23:59:59.000Z

162

A Bayesian Framework for Combining Valuation Estimates  

E-Print Network (OSTI)

Obtaining more accurate equity value estimates is the starting point for stock selection, value-based indexing in a noisy market, and beating benchmark indices through tactical style rotation. Unfortunately, discounted cash flow, method of comparables, and fundamental analysis typically yield discrepant valuation estimates. Moreover, the valuation estimates typically disagree with market price. Can one form a superior valuation estimate by averaging over the individual estimates, including market price? This article suggests a Bayesian framework for combining two or more estimates into a superior valuation estimate. The framework justifies the common practice of averaging over several estimates to arrive at a final point estimate.

Kenton K. Yee

2007-07-24T23:59:59.000Z

163

Benefit Forms | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

New Employee Orientation » Benefit Forms New Employee Orientation » Benefit Forms Benefit Forms The employment and benefits forms that you will be asked to complete as part of this orientation program can be numerous. Each, however, serves an important purpose in ensuring proper recording of your employment and benefit elections. This online program is designed to make the task a little easier. Each set of forms that you will work with has been compiled to ensure that you are only completing the essential documentation for your individual employment circumstance. Also, each set begins with an Employee Information Form that, upon completion, will auto-populate applicable data throughout the entire package. All of the forms are in PDF format and require Acrobat Reader to view and fill-in. When you open the form "Packages," it will load in a separate

164

SSRL Computer Account Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

SSRLLCLS Computer Account Request Form August 2009 Fill in this form and sign the security statement mentioned at the bottom of this page to obtain an account. Your Name:...

165

DOE Form 1322.4  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2.4 2.4 (09-98) All other editions are obsolete. Instructions: Forward completed checklist/approval form(s) to your organizational Forms Manager for review and coordination of approval. Forms are approved by HR-41. U.S. DEPARTMENT OF ENERGY FORMS CHECKLIST / APPROVAL I. ANALYSIS II. DESIGN, PRINTING AND STORAGE 1. TYPE OF FORM / REPORT 4. DATA COLLECTION 2. TITLE 5. Current Form No.: 6. Prescribing Directive: 3. FREQUENCY OF USE Single Daily Weekly Quarterly Monthly Annually Semi-Annually New Revision Cancellation Yes No 7. Purpose and content of form / report have been reviewed, and are reasonable and in keeping with the function of the originating organization. Y N 9. Format is arranged in effective manner with data elements in logical sequence according to workflow or types of source documents.

166

Matryoshka of Special Democratic Forms  

E-Print Network (OSTI)

Special p-forms are forms which have components \\phi_{\\mu_1...\\mu_p} equal to +1,-1 or 0 in some orthonormal basis. A p-form \\phi\\in \\Lambda^p R^d is called democratic if the set of nonzero components {\\phi_{\\mu_1...\\mu_p}} is symmetric under the transitive action of a subgroup of O(d,Z) on the indices {1,...,d}. Knowledge of these symmetry groups allows us to define mappings of special democratic p-forms in d dimensions to special democratic P-forms in D dimensions for successively higher P \\geq p and D \\geq d. In particular, we display a remarkable nested stucture of special forms including a U(3)-invariant 2-form in six dimensions, a G_2-invariant 3-form in seven dimensions, a Spin(7)-invariant 4-form in eight dimensions and a special democratic 6-form \\Omega in ten dimensions. The latter has the remarkable property that its contraction with one of five distinct bivectors, yields, in the orthogonal eight dimensions, the Spin(7)-invariant 4-form. We discuss various properties of this ten dimensional form.

Chandrashekar Devchand; Jean Nuyts; Gregor Weingart

2008-12-16T23:59:59.000Z

167

Titanium sealing glasses and seals formed therefrom  

DOE Patents (OSTI)

Alkaline-earth lanthanoborate sealing-glass compositions containing CaO, La.sub.2 O.sub.3, B.sub.2 O.sub.3, TiO.sub.2 and Al.sub.2 O.sub.3 in various combinations of mole-% are provided. These sealing-glass compositions are useful for forming hermetic glass-to-metal seals with titanium and titanium alloys that have a high aqueous durability for component or device applications requiring exposure to moisture, water or body fluids. Particular applications of the titanium sealing-glass compositions include forming glass-to-metal seals for lithium batteries and implanted biomedical devices (e.g. batteries, pacemakers, defibrillators, pumps).

Brow, Richard K. (Albuquerque, NM); McCollister, Howard L. (Albuquerque, NM); Phifer, Carol C. (Albuquerque, NM); Day, Delbert E. (Rolla, MO)

1997-01-01T23:59:59.000Z

168

Combination moisture and hydrogen getter  

DOE Patents (OSTI)

A combination moisture and hydrogen getter comprises (a) a moisture getter comprising a readily oxidizable metal; and (b) a hydrogen getter comprising (i) a solid acetylenic compound and (ii) a hydrogenation catalyst. A method of scavenging moisture from a closed container uses the combination moisture and hydrogen getter to irreversibly chemically reduce the moisture and chemically bind the resultant hydrogen.

Harrah, Larry A. (Albuquerque, NM); Mead, Keith E. (Peralta, NM); Smith, Henry M. (Overland Park, KS)

1983-01-01T23:59:59.000Z

169

Document Control Template-Form  

NLE Websites -- All DOE Office Websites (Extended Search)

2 Key Check-Out Form 10_0823 Page 1 of 3 2 Key Check-Out Form 10_0823 Page 1 of 3 EOTA - Business Form Document Title: Key Check-Out Form Document Number: MGTF-012 Rev. 10_0823 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: MGTP-003, Control of Customer Property Notify of Changes: MGT, ADM Referenced Document(s): N/A MGTF-012 Key Check-Out Form 10_0823 Page 2 of 3 Revision History: Rev. Description of Change 10_0823 Initial Release MGTF-012 Key Check-Out Form 10_0823 NATIONAL NUCLEAR SECURITY ADMINISTRATION Emergency Operations Training Academy Key Check-Out Form Name: Initial Suite Key: Date returned: Furniture Key: Date returned: Building Key: Date returned: Other Key(s): Date returned:

170

Document Control Template-Form  

NLE Websites -- All DOE Office Websites (Extended Search)

7 Equipment Check-Out Form 08_0411 Page 1 of 3 7 Equipment Check-Out Form 08_0411 Page 1 of 3 EOTA - Business Form Document Title: Equipment Check-Out Form Document Number: MGTF-007 Rev. 08_0411 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: MGTP-003, Control of Customer Property Notify of Changes: MGT, ADM Referenced Document(s): N/A MGTF-007 Equipment Check-Out Form 08_0411 Page 2 of 3 Revision History: Rev. Description of Change A Initial Release 08_0411 Footer removed as document is for internal use only MGTF-007 Equipment Check-Out Form 08_0411 NATIONAL NUCLEAR SECURITY ADMINISTRATION Emergency Operations Training Academy EQUIPMENT CHECK-OUT FORM Name: Date taken:

171

Answerfinder - question answering by combining lexical, syntactic and semantic information  

E-Print Network (OSTI)

We present a question answering system that combines information at the lexical, syntactic, and semantic levels, in the process to find and rank the candidate answer sentences. The candidate exact answers are extracted from the candidate answer sentences by means of a combination of information-extraction techniques (named entity recognition) and patterns based on logical forms. The system participated in the question answering track of TREC 2004. 1

Diego Mollá; Mary Gardiner

2004-01-01T23:59:59.000Z

172

NIST Atomic Form Factors: Form factors and standard ...  

Science Conference Proceedings (OSTI)

... 2. Form Factors and Standard Definitions. ... with ? in, eg, Ångstroms; the "anomalous" scattering factor f? (depending on x-ray energy E and the ...

173

form  

Science Conference Proceedings (OSTI)

184 THORN HILL ROAD. WARRENDALE, PA 15086-7514. USA. Promoting the global science and engineering Professions concerned with minerals, metals ...

174

Seal for fluid forming tools  

SciTech Connect

An electro-hydraulic forming tool for forming a sheet metal blank in a one-sided die has first and second rigid rings that engage opposite sides of a sheet metal blank. The rigid rings are contained within slots on a die portion and a hydraulic force applicator portion of the forming tool. The seals are either resiliently biased by an elastomeric member or inherently resiliently biased into contact with the blank.

Golovashchenko, Sergey Fedorovich (Beverly Hills, MI); Bonnen, John Joseph Francis (Milford, MI)

2012-03-20T23:59:59.000Z

175

Autonomous grain combine control system  

DOE Patents (OSTI)

A system for controlling a grain combine having a rotor/cylinder, a sieve, a fan, a concave, a feeder, a header, an engine, and a control system. The feeder of the grain combine is engaged and the header is lowered. A separator loss target, engine load target, and a sieve loss target are selected. Grain is harvested with the lowered header passing the grain through the engaged feeder. Separator loss, sieve loss, engine load and ground speed of the grain combine are continuously monitored during the harvesting. If the monitored separator loss exceeds the selected separator loss target, the speed of the rotor/cylinder, the concave setting, the engine load target, or a combination thereof is adjusted. If the monitored sieve loss exceeds the selected sieve loss target, the speed of the fan, the size of the sieve openings, or the engine load target is adjusted.

Hoskinson, Reed L.; Kenney, Kevin L.; Lucas, James R.; Prickel, Marvin A.

2013-06-25T23:59:59.000Z

176

Employee In-Processing Forms  

Energy.gov (U.S. Department of Energy (DOE))

Editable PDF in-processing forms which can be filled out by new employees prior to their first day of work 

177

System for forming janus particles  

DOE Patents (OSTI)

The invention is a method of forming Janus particles, that includes forming an emulsion that contains initial particles, a first liquid, and a second liquid; solidifying the first liquid to form a solid that contains at least a portion of the initial particles on a surface of the solid; and treating the exposed particle sides with a first surface modifying agent, to form the Janus particles. Each of the initial particles on the surface has an exposed particle side and a blocked particle side.

Hong, Liang (Midland, MI); Jiang, Shan (Champaign, IL); Granick, Steve (Champaign, IL)

2011-01-25T23:59:59.000Z

178

Homeowner Soil Sample Information Form  

E-Print Network (OSTI)

Homeowners should submit this form with their soil samples when requesting a soil test from the Texas A&M Soil Testing Laboratory.

Provin, Tony

2007-04-11T23:59:59.000Z

179

Document Control Template-Form  

NLE Websites -- All DOE Office Websites (Extended Search)

3 Media Requests 080904 EOTA - Business Form Document Title: ITTP-018, Media Inventory Control Document Number: Media Requests ITT, ADM Ben Aragon NA Referenced Documents: Parent...

180

Price/Cost Proposal Form  

NLE Websites -- All DOE Office Websites (Extended Search)

PRICECOST PROPOSAL FORM Page No. of NREL Solicitation Document Number: Offeror's Name and Address: Title of Proposed Effort and Task No., Phase No., or Project Total, As...

Note: This page contains sample records for the topic "form eia-920 combined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

A Novel in situ Trigger Combination Method  

E-Print Network (OSTI)

Searches for rare physics processes using particle detectors in high-luminosity colliding hadronic beam environments require the use of multi-level trigger systems to reject colossal background rates in real time. In analyses like the search for the Higgs boson, there is a need to maximize the signal acceptance by combining multiple different trigger chains when forming the offline data sample. In such statistically limited searches, datasets are often amassed over periods of several years, during which the trigger characteristics evolve and system performance can vary significantly. Reliable production cross-section measurements and upper limits must take into account a detailed understanding of the effective trigger inefficiency for every selected candidate event. We present as an example the complex situation of three trigger chains, based on missing energy and jet energy, that were combined in the context of the search for the Higgs (H) boson produced in association with a $W$ boson at the Collider Detector at Fermilab (CDF). We briefly review the existing techniques for combining triggers, namely the inclusion, division, and exclusion methods. We introduce and describe a novel fourth in situ method whereby, for each candidate event, only the trigger chain with the highest a priori probability of selecting the event is considered. We compare the inclusion and novel in situ methods for signal event yields in the CDF $WH$ search. This new combination method, by virtue of its scalability to large numbers of differing trigger chains and insensitivity to correlations between triggers, will benefit future long-running collider experiments, including those currently operating on the Large Hadron Collider.

Adrian Buzatu; Andreas Warburton; Nils Krumnack; Wei-Ming Yao

2012-06-21T23:59:59.000Z

182

Programmed design of ship forms  

Science Conference Proceedings (OSTI)

This paper describes a new category of CAD applications devoted to the definition and parameterization of hull forms, called programmed design. Programmed design relies on two prerequisites. The first one is a product model with a variety of types large ... Keywords: CAD language, Hull form, Parametric design, Product model, Programmed design

A. Rodríguez; L. Fernández-Jambrina

2012-07-01T23:59:59.000Z

183

Method of forming ceramic bricks  

SciTech Connect

A method for forming free standing ceramic bricks for use as tritium breeder material is disclosed. Aqueous solutions of sodium carbonate and potassium carbonate are mixed with an organic hydrocolloid dispersion and powdered lithium carbonate, spray dried, and ceramic bricks formed by molding in a die and firing.

Poeppel, Roger B. (Glen Ellyn, IL); Claar, Terry D. (Newark, DE); Silkowski, Peter (Urbana, IL)

1988-01-01T23:59:59.000Z

184

Electromagnetic form factors of hadrons  

SciTech Connect

A vector meson dominance model of the electromagnetic form factors of hadrons is developed which is based on the use of unstable particle propagators. Least-square fits are made to the proton, neutron, pion and kaon form factor data in both the space and time-like regions. A good fit to the low-energy nucleon form factor data is obtained using only rho, $omega$, and phi dominance, and leads to a determination of the vector meson resonance parameters in good agreement with experiment. The nucleon-vector meson coupling constants obey simple sum rules indicating that there exists no hard core contribution to the form factors within theoretical uncertainties. The prediction for the electromagnetic radii of the proton is in reasonable agreement with recent experiments. The pion and kaon charge form factors as deduced from the nucleon form factors assuming vector meson universality are compared to the data. The pion form factor agrees with the data in both the space and time-like regions. The pion charge radius is in agreement with the recent Dubna result, but the isovector P-wave pion-pion phase shift calculated from the theory disagrees with experiment. A possible contribution to the form factors from a heavy rho meson is also evaluated. (auth)

Zidell, V.S.

1976-01-01T23:59:59.000Z

185

Waste Pickup Form User's Guide  

E-Print Network (OSTI)

Waste Pickup Form User's Guide Updated: 3/13/12 #12;Introduction: Welcome to the Cal State University Fullerton Online Waste Pickup Form User's Guide. In this guide you will learn what you can use phosphorus-32) 3. To request a pickup of universal waste including light bulbs, aerosol cans, batteries

de Lijser, Peter

186

Comments on Form Factor Bounds  

E-Print Network (OSTI)

Improved model independent upper bounds on the weak transition form factors are derived using inclusive sum rules. Comparison of the new bounds with the old ones is made for the form factors h_{A_1} and h_V in B -> D* decays.

Chiang, C W

2000-01-01T23:59:59.000Z

187

Remarks on Form Factor Bounds  

E-Print Network (OSTI)

Improved model independent upper bounds on the weak transition form factors are derived using inclusive sum rules. Comparison of the new bounds with the old ones is made for the form factors h_{A_1} and h_V in B -> D* decays.

Cheng-Wei Chiang

1999-09-07T23:59:59.000Z

188

Method of forming ceramic bricks  

DOE Patents (OSTI)

A method for forming free standing ceramic bricks for use as tritium breeder material is disclosed. Aqueous solutions of sodium carbonate and potassium carbonate are mixed with an organic hydrocolloid dispersion and powdered lithium carbonate, spray dried, and ceramic bricks formed by molding in a die and firing.

Poeppel, R.B.; Claar, T.D.; Silkowski, P.

1987-04-22T23:59:59.000Z

189

Industrial Distributed Energy: Combined Heat & Power | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Industrial Distributed Energy: Combined Heat & Power Industrial Distributed Energy: Combined Heat & Power Information about the Department of Energy's Industrial Technologies...

190

The Combination of Renewable Energy Effective Use and Architecture Design  

E-Print Network (OSTI)

Through introducing the renewable energy and its characteristics, it is illuminated that renewable energy use has much superiority. At the same time, through introducing renewable energy technology, which is used in architecture, and elaborating on the form in which renewable energy is combined with architecture, this paper expresses the architectural design concept that architectural design should be organic and unified with renewable energy use.

Zhou, Y.

2006-01-01T23:59:59.000Z

191

GUIDELINES FOR CERTIFICATION OF COMBINED HEAT AND POWER SYSTEMS  

E-Print Network (OSTI)

Description 1 CHP System Name 2 CEC Plant ID 3 EIA Plant ID 4 Qualifying Facility ID (if applicable) 5 Thermal, and emissions related to combined heat and power (CHP) system power plant operations. This information is used the power plant is first reported on Form CEC-2843. The respondent should use the Commission assigned code

192

Spray forming system for producing molds, dies and related tooling  

DOE Patents (OSTI)

A system for the spray forming manufacturing of near-net-shape molds, dies and related toolings, wherein liquid material such as molten metal, metallic alloys, or polymers are atomized into fine droplets by a high temperature, high velocity gas and deposited onto a pattern. Quenching of the atomized droplets provides a heat sink, thereby allowing undercooled and partially solidified droplets to be formed in-flight. Composites can be formed by combining the atomized droplets with solid particles such as powders, whiskers or fibers.

McHugh, Kevin M. (Idaho Falls, ID)

2000-01-01T23:59:59.000Z

193

Fire Protection Account Request Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fire Protection System Account Request Form Fire Protection System Account Request Form To obtain a user id and password to access the Fire Protection system, please complete the form, save the file and email it to hssUserSupport@hq.doe.gov or print and fax it to 301-903-9823. We will provide a username and password to new account holders. Please allow several business days to process your account request. When your request is approved, you will be contacted with your

194

HHS SMALL BUSINESS REVIEW FORM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE Form 4220.2 (Revised March 14 2013) DOE Form 4220.2 (Revised March 14 2013) Office of Small and Disadvantaged Business Utilization DOE F 4220.2 - Small Business Review Form (03/14/2013) OSDBU Control Number: _______________________________________Date Received: ______________________________ A. Project Information 1. Requisition Number: ________________________ Acquisition Instrument Proposed/Contract Type: [ ] Contract No (Mod): ______________________ [ ] Departmental IDIQ No: ___________________ [ ] GSA Schedule: _________________________ [ ] GWAC Contract: ________________________ [ ] DOE BPA:_____________________________ 2. Acquisition Office and Program Element: CO/CS Name: Contact Information (Telephone and E-mail): 3. Description of services or supplies:

195

Multi-fidelity optimization for sheet metal forming process  

Science Conference Proceedings (OSTI)

Traditional design optimization for industry problems often requires many runs of costly high-fidelity finite element models. Multi-fidelity techniques offer a means to reducing prohibitive computational cost by combining cheap low-fidelity analyses ... Keywords: Drawbead design, Moving least squares (MLS), Multi-fidelity optimization, Multiobjective optimization, Response surface method (RSM), Sheet-metal forming

Guangyong Sun; Guangyao Li; Shiwei Zhou; Wei Xu; Xujing Yang; Qing Li

2011-07-01T23:59:59.000Z

196

Combining optical spectroscopy and interferometry  

E-Print Network (OSTI)

Modern optical spectrographs and optical interferometers push the limits in the spectral and spatial regime, providing important new tools for the exploration of the universe. In this contribution I outline the complementary nature of spectroscopic & interferometric observations and discuss different strategies for combining such data. Most remarkable, the latest generation of "spectro-interferometric" instruments combine the milliarcsecond angular resolution achievable with interferometry with spectral capabilities, enabling direct constraints on the distribution, density, kinematics, and ionization structure of the gas component in protoplanetary disks. I will present some selected studies from the field of star- & planet formation and hot star research in order to illustrate these fundamentally new observational opportunities.

Kraus, Stefan

2013-01-01T23:59:59.000Z

197

Medical Treatment Authorization Form _____________________________________________________________________ DOB___/____/____  

E-Print Network (OSTI)

Medical Treatment Authorization Form if they are in excess of other valid and collectible insurance. 1. List any medical conditions that camp personnel): _____________________________________________________________________________________ _____________________________________________________________________________________ 2. List any medications currently taking

198

Process for forming planarized films  

DOE Patents (OSTI)

A planarization process and apparatus which employs plasma-enhanced chemical vapor deposition (PECVD) to form plarnarization films of dielectric or conductive carbonaceous material on step-like substrates.

Pang, Stella W. (Arlington, MA); Horn, Mark W. (North Chelmsford, MA)

1991-01-01T23:59:59.000Z

199

Materials Week '97: Registration Form  

Science Conference Proceedings (OSTI)

Failure Analysis/Characterization and Testing Conferences (MC) ... (NOTES: This offer is available to full conference registrants only; also, you must print this form and mail or fax it with your signature in order to qualify ... Country of Citizenship.

200

Instructions for Form EIA-1605  

U.S. Energy Information Administration (EIA)

U.S. Department of Energy U.S. Energy Information Administration ... Section 1605(b) of the Energy Policy Act (EPAct) of 1992 (42 USC 13385). The form implements the

Note: This page contains sample records for the topic "form eia-920 combined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Triggered pore-forming agents  

DOE Patents (OSTI)

An inactive pore-forming agent which is activated to lytic function by a condition such as pH, light, heat, reducing potential, or metal ion concentration, or substance such as a protease, at the surface of a cell.

Bayley, Hagan (Grafton, MA); Walker, Barbara J. (Auburn, MA); Chang, Chung-yu (Worcester, MA); Niblack, Brett (Nashville, TN); Panchal, Rekha (Shrewsbury, MA)

1998-01-01T23:59:59.000Z

202

EIA-412 Form and Instructions  

U.S. Energy Information Administration (EIA) Indexed Site

12 (2003) |ANNUAL ELECTRIC INDUSTRY FINANCIAL REPORT |Form 12 (2003) |ANNUAL ELECTRIC INDUSTRY FINANCIAL REPORT |Form Approved OMB No. 1905-0129 Approval Expires 11/30/04 | | |GENERAL INFORMATION| |PURPOSE Form EIA-412 collects accounting, plant statistics, and transmission data from various electric industry entities in the United States. The data from this report appear in the following EIA publications: Financial Statistics of Major U.S. Publicly Owned Electric Utilities and Electric Power Annual. The data collected on this form are used to monitor the current status and trends of the electric power industry and to evaluate the future of the industry.| |REQUIRED RESPONDENTS The accounting data (Schedules 1 through 8) are to be completed by each municipality, political subdivision, State, and Federal entity engaged in the generation, transmission, or distribution of

203

Residential California adobe : mud form  

E-Print Network (OSTI)

Northern California has a rich tradition of adobe architecture . Formed with earth, defined by site, climate and use, the adobe structures exemplify a building methodology in harmony with nature and the lifestyle of it's ...

Daymond, Diana Leigh

1985-01-01T23:59:59.000Z

204

2014 Teacher Workshop Registration Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Teacher Workshop Registration Form Teacher Workshop Registration Form Workshop name and dates: (Please check those you want to attend; fees do not include Aurora University graduate credit.) Insects at Work in Our World: $110 June 19-20 Beauty and Charm at Fermilab: $275 July 14-18 Particles and Prairies: $275 July 21-25 Phriendly Physics: $275 July 28-August 1 The Prairie - Our Heartland: $175

205

Method for forming metal contacts  

DOE Patents (OSTI)

Methods of forming metal contacts with metal inks in the manufacture of photovoltaic devices are disclosed. The metal inks are selectively deposited on semiconductor coatings by inkjet and aerosol apparatus. The composite is heated to selective temperatures where the metal inks burn through the coating to form an electrical contact with the semiconductor. Metal layers are then deposited on the electrical contacts by light induced or light assisted plating.

Reddington, Erik; Sutter, Thomas C; Bu, Lujia; Cannon, Alexandra; Habas, Susan E; Curtis, Calvin J; Miedaner, Alexander; Ginley, David S; Van Hest, Marinus Franciscus Antonius Maria

2013-09-17T23:59:59.000Z

206

Methods of forming hardened surfaces  

DOE Patents (OSTI)

The invention encompasses a method of forming a metallic coating. A metallic glass coating is formed over a metallic substrate. After formation of the coating, at least a portion of the metallic glass can be converted into a crystalline material having a nanocrystalline grain size. The invention also encompasses metallic coatings comprising metallic glass. Additionally, the invention encompasses metallic coatings comprising crystalline metallic material, with at least some of the crystalline metallic material having a nanocrystalline grain size.

Branagan, Daniel J. (Iona, ID)

2004-07-27T23:59:59.000Z

207

INEL spray-forming research  

SciTech Connect

Spray forming is a near-net-shape fabrication technology in which a spray of finely atomized liquid droplets is deposited onto a suitably shaped substrate or mold to produce a coherent solid. The technology offers unique opportunities for simplifying materials processing without sacrificing, and oftentimes substantially improving, product quality. Spray forming can be performed with a wide range of metals and nonmetals, and offers property improvements resulting from rapid solidification (e.g. refined microstructures, extended solid solubilities and reduced segregation). Economic benefits result from process simplification and the elimination of unit operations. Researchers at the Idaho National Engineering Laboratory (INEL) are developing spray-forming technology for producing near-net-shape solids and coatings of a variety of metals, polymers, and composite materials. Results from several spray-forming programs are presented to illustrate the range of capabilities of the technique as well as the accompanying technical and economic benefits. Low-carbon steel strip >0.75 mm thick and polymer membranes for gas/gas and liquid/liquid separations that were spray formed are discussed; recent advances in spray forming molds, dies, and other tooling using low-melting-point metals are described.

McHugh, K.M.; Key, J.F.

1992-01-01T23:59:59.000Z

208

INEL spray-forming research  

SciTech Connect

Spray forming is a near-net-shape fabrication technology in which a spray of finely atomized liquid droplets is deposited onto a suitably shaped substrate or mold to produce a coherent solid. The technology offers unique opportunities for simplifying materials processing without sacrificing, and oftentimes substantially improving, product quality. Spray forming can be performed with a wide range of metals and nonmetals, and offers property improvements resulting from rapid solidification (e.g. refined microstructures, extended solid solubilities and reduced segregation). Economic benefits result from process simplification and the elimination of unit operations. Researchers at the Idaho National Engineering Laboratory (INEL) are developing spray-forming technology for producing near-net-shape solids and coatings of a variety of metals, polymers, and composite materials. Results from several spray-forming programs are presented to illustrate the range of capabilities of the technique as well as the accompanying technical and economic benefits. Low-carbon steel strip >0.75 mm thick and polymer membranes for gas/gas and liquid/liquid separations that were spray formed are discussed; recent advances in spray forming molds, dies, and other tooling using low-melting-point metals are described.

McHugh, K.M.; Key, J.F.

1992-12-31T23:59:59.000Z

209

H gas turbine combined cycle  

SciTech Connect

A major step has been taken in the development of the Next Power Generation System--``H`` Technology Combined Cycle. This new gas turbine combined-cycle system increases thermal performance to the 60% level by increasing gas turbine operating temperature to 1,430 C (2,600 F) at a pressure ratio of 23 to 1. Although this represents a significant increase in operating temperature for the gas turbine, the potential for single digit NOx levels (based upon 15% O{sub 2}, in the exhaust) has been retained. The combined effect of performance increase and environmental control is achieved by an innovative closed loop steam cooling system which tightly integrates the gas turbine and steam turbine cycles. The ``H`` Gas Turbine Combined Cycle System meets the goals and objectives of the DOE Advanced Turbine System Program. The development and demonstration of this new system is being carried out as part of the Industrial/Government cooperative agreement under the ATS Program. This program will achieve first commercial operation of this new system before the end of the century.

Corman, J.

1995-12-31T23:59:59.000Z

210

The combined Lagrangian advection method  

Science Conference Proceedings (OSTI)

We present and test a new hybrid numerical method for simulating layerwise-two-dimensional geophysical flows. The method radically extends the original Contour-Advective Semi-Lagrangian (CASL) algorithm [5] by combining three computational elements for ... Keywords: Contour advection, Pseudo-spectral, Two-dimensional turbulence, Vortex methods

David G. Dritschel; Jérôme Fontane

2010-07-01T23:59:59.000Z

211

Carbon dioxide disposal in solid form  

SciTech Connect

Coal reserves can provide for the world`s energy needs for centuries. However, coal`s long term use may be severely curtailed if the emission of carbon dioxide into the atmosphere is not eliminated. We present a safe and permanent method of carbon dioxide disposal that is based on combining carbon dioxide chemically with abundant raw materials to form stable carbonate minerals. We discuss the availability of raw materials and potential process designs. We consider our initial rough cost estimate of about 3{cents}/kWh encouraging. The availability of a carbon dioxide fixation technology would serve as insurance in case global warming, or the perception of global warming, causes severe restrictions on carbon dioxide emissions. If the increased energy demand of a growing world population is to be satisfied from coal, the implementation of such a technology would quite likely be unavoidable.

Lackner, K.S.; Butt, D.P.; Sharp, D.H. [Los Alamos National Lab., NM (United States); Wendt, C.H. [Auxon Corp., (United States)

1995-12-31T23:59:59.000Z

212

Converting energy from fusion into useful forms  

E-Print Network (OSTI)

If fusion power reactors are to be feasible, it will still be necessary to convert the energy of the nuclear reaction into usable form. The heat produced will be removed from the reactor core by a primary coolant, which might be water, helium, molten lithium-lead, molten lithium-containing salt, or CO2. The heat could then be transferred to a conventional Rankine cycle or Brayton (gas turbine) cycle. Alternatively it could be used for thermochemical processes such as producing hydrogen or other transport fuels. Fusion presents new problems because of the high energy neutrons released. These affect the selection of materials and the operating temperature, ultimately determining the choice of coolant and working cycle. The limited temperature ranges allowed by present day irradiated structural materials, combined with the large internal power demand of the plant, will limit the overall thermal efficiency. The operating conditions of the fusion power source, the materials, coolant, and energy conversion system w...

Kovari, M; Jenkins, I; Kiely, C

2014-01-01T23:59:59.000Z

213

Texaco, carbide form hydrogen plant venture  

Science Conference Proceedings (OSTI)

This paper reports that Texaco Inc. and Union Carbide Industrial Gases Inc. (UCIG) have formed a joint venture to develop and operate hydrogen plants. The venture, named HydroGEN Supply Co., is owned by Texaco Hydrogen Inc., a wholly owned subsidiary of Texaco, and UCIG Hydrogen Services Inc., a wholly owned subsidiary of UCIG. Plants built by HydroGEN will combine Texaco's HyTEX technology for hydrogen production with UCIG's position in cryogenic and advanced air separation technology. Texaco the U.S. demand for hydrogen is expected to increase sharply during the next decade, while refinery hydrogen supply is expected to drop. The Clean Air Act amendments of 1990 require U.S. refiners to lower aromatics in gasoline, resulting in less hydrogen recovered by refiners from catalytic reforming units. Meanwhile, requirements to reduce sulfur in diesel fuel will require more hydrogen capacity.

Not Available

1992-03-30T23:59:59.000Z

214

ATTACHMENT 10 PERSONNEL QUALIFICATIONS FORM  

E-Print Network (OSTI)

: Power Plant Cooling 19. Marine Biologist: Wave Energy, Once-through Cooling Technologies E. Industrial/Distribution Technologies and Power Electronics C. Energy Related Advanced Generation 10. Combined Cooling, Heating and Power (CCHP) Technologies and Applications 11. Fuel Cell Technologies 12. Reciprocating Engines 13

215

DOE Headquarters FOIA Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Oak Ridge Office FOIA Request Form Oak Ridge Office FOIA Request Form To make an Electronic FOIA (E-FOIA) request, please provide the information below. Failure to enter accurate and complete information may render your FOIA request impossible to fulfill. * Requests submitted under the Privacy Act must be signed and, therefore, cannot be submitted on this form. Name: (Required) Organization: Address: (Required) Phone: FAX: Email: Reasonably Describe Records Describe the specific record (s) you seek with sufficient detail that a knowledgeable official of the activity may locate the record with a reasonable amount of effort. Such detail should include: dates, titles, file designations, and offices to be searched. Since most DOE records are not retained permanently, the more information that you provide, the better the opportunity there is to determine if the

216

EIA-412 Form and Instructions  

U.S. Energy Information Administration (EIA) Indexed Site

12 (2003) 12 (2003) ANNUAL ELECTRIC INDUSTRY FINANCIAL REPORT Form Approved OMB No. 1905-0129 Approval Expires 11/30/04 GENERAL INFORMATION PURPOSE Form EIA-412 collects accounting, plant statistics, and transmission data from various electric industry entities in the United States. The data from this report appear in the following EIA publications: Financial Statistics of Major U.S. Publicly Owned Electric Utilities and Electric Power Annual. The data collected on this form are used to monitor the current status and trends of the electric power industry and to evaluate the future of the industry. REQUIRED RESPONDENTS The accounting data (Schedules 1 through 8) are to be completed by each municipality, political subdivision, State, and Federal entity engaged in the generation,

217

Radiation Safety Work Control Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Radiation Safety Work Control Form Radiation Safety Work Control Form (see instructions on pg-2) Rev July-2012 Area: Form #: Date: Preliminary Applicability Screen: (a) Will closing the beam line injection stoppers mitigate the radiological hazards introduced by the proposed work? Yes No (b) Can the closed state of the beam line injection stoppers be assured during the proposed work (ie., work does NOT involve injection stoppers or associated HPS)? Yes No If the answers to both questions are yes, the work can be performed safely under an SSRL RSWCF. If the answer to either question is no, then the work must be performed under a SPEAR3 RSWCF. Section 1: Description of work to be done, including date and time. (Person Responsible completes section)

218

Method of forming structural heliostat  

DOE Patents (OSTI)

In forming a heliostat having a main support structure and pivoting and tilting motors and gears and a mirror module for reflecting solar energy onto a collector, the improvement characterized by a method of forming the mirror module in which the mirror is laid upon a solid rigid supporting bed in one or more sections, with or without focusing; a mirror backing sheet is applied by first applying respective thin layers of silicone grease and, thereafter, progressively rolling application to eliminate air bubbles; followed by affixing of a substrate assembly to the mirror backing sheet to form a mirror module that does not curve because of thermally induced stresses and differential thermal expansion or contraction effects. The silicone grease also serves to dampen fluttering of the mirror and protect the mirror backside against adverse effects of the weather. Also disclosed are specific details of preferred embodiments.

Anderson, Alfred J. (Littleton, CO)

1984-06-26T23:59:59.000Z

219

Substrate system for spray forming  

SciTech Connect

A substrate system for receiving a deposit of sprayed metal droplets including a movable outer substrate on which the sprayed metal droplets are deposited. The substrate system also includes an inner substrate disposed adjacent the outer substrate where the sprayed metal droplets are deposited on the outer substrate. The inner substrate includes zones of differing thermal conductivity to resist substrate layer porosity and to resist formation of large grains and coarse constituent particles in a bulk layer of the metal droplets which have accumulated on the outer substrate. A spray forming apparatus and associated method of spray forming a molten metal to form a metal product using the substrate system of the invention is also provided.

Chu, Men G. (Export, PA); Chernicoff, William P. (Harrisburg, PA)

2000-01-01T23:59:59.000Z

220

Substrate system for spray forming  

DOE Patents (OSTI)

A substrate system for receiving a deposit of sprayed metal droplets including a movable outer substrate on which the sprayed metal droplets are deposited. The substrate system also includes an inner substrate disposed adjacent the outer substrate where the sprayed metal droplets are deposited on the outer substrate. The inner substrate includes zones of differing thermal conductivity to resist substrate layer porosity and to resist formation of large grains and coarse constituent particles in a bulk layer of the metal droplets which have accumulated on the outer substrate. A spray forming apparatus and associated method of spray forming a molten metal to form a metal product using the substrate system of the invention is also provided.

Chu, Men G. (Export, PA); Chernicoff, William P. (Harrisburg, PA)

2002-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "form eia-920 combined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

PROCESS OF FORMING POWDERED MATERIAL  

DOE Patents (OSTI)

A process of forming high-density compacts of a powdered ceramic material is described by agglomerating the powdered ceramic material with a heat- decompossble binder, adding a heat-decompossble lubricant to the agglomerated material, placing a quantity of the material into a die cavity, pressing the material to form a compact, pretreating the compacts in a nonoxidizing atmosphere to remove the binder and lubricant, and sintering the compacts. When this process is used for making nuclear reactor fuel elements, the ceramic material is an oxide powder of a fissionsble material and after forming, the compacts are placed in a cladding tube which is closed at its ends by vapor tight end caps, so that the sintered compacts are held in close contact with each other and with the interior wall of the cladding tube.

Glatter, J.; Schaner, B.E.

1961-07-14T23:59:59.000Z

222

LFS Subcontract Form of Agreement  

NLE Websites -- All DOE Office Websites (Extended Search)

SFA (Rev. 5, 4/5/13) Subcontract Form of Agreement SFA (Rev. 5, 4/5/13) Subcontract Form of Agreement Dated 5-20-13 Subcontract No. 241314 Page 1 of 2 Subcontract Form of Agreement Subcontractor: TBD Subcontract No.: 241314 Address: * Contact: * Telephone: * Facsimile: * E-mail: * D-U-N-S No.: * NAICS Code: 334111 This subcontract, effective on the date of signature by the last party to sign, is hereby made and entered into by and between Los Alamos National Security, LLC (CONTRACTOR), and the above named SUBCONTRACTOR who hereby agree that all Work specified below, which is a portion of the goods and services to be provided by CONTRACTOR for the United States Department of Energy National Nuclear Security Administration (OWNER), shall be performed by the SUBCONTRACTOR in accordance with all

223

Microsoft Word - FORM46002.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

MANAGEMENT REPORTING MANAGEMENT REPORTING Progress Report Special Status Report SCIENTIFIC/TECHNICAL REPORTING (Reports/Products must be submitted with appropriate DOE F 241. The 241 forms are available at www.osti.gov/elink.) Report/Product Form Final Scientific/Technical Report DOE F 241.3 Conference papers/proceedings* DOE F 241.3 Software/Manual DOE F 241.4 Other (see special instructions) DOE F 241.3 * Scientific and technical conferences only FINANCIAL REPORTING SF-269, Financial Status Report SF-269A, Financial Status Report (Short Form) SF-272, Federal Cash Transactions Report CLOSEOUT REPORTING Patent Certification Property Certification Other (see Special Instructions) OTHER REPORTING Other (see Special Instructions)

224

Sources: Energy Information Administration, Form EIA-182,  

Annual Energy Outlook 2012 (EIA)

Form EIA-182, "Domestic Crude Oil First Purchase Report"; Form EIA-856, "Monthly Foreign Crude Oil Acquisition Report"; and Form EIA-14, "Refiners' Monthly Cost Report." 0...

225

Opinion of Counsel Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Opinion of Counsel Form Opinion of Counsel Form For use with natural gas authorization filings Opinion of Counsel Form - Natural Gas Regulation...

226

ORPS User Registration Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ORPS User Registration Form ORPS User Registration Form August 09, 2007 Operational Event Information Systems Registration Form For Occurrence Reporting and Processing System ORPS...

227

Technology Transfer Reporting Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technology Transfer Reporting Form Technology Transfer Reporting Form Technology Transfer Reporting Form More Documents & Publications DOE F 3230.6A Technology Partnership...

228

TEPP - Exercise Evaluation Forms | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Forms Hazardous Materials Exercise Evaluation Forms Exercise Evaluation Forms More Documents & Publications TEPP - Spent Nuclear Fuel Radiography Device Soil DensityMoisture Gauge...

229

RRC Form H-11 | Open Energy Information  

Open Energy Info (EERE)

Page Edit with form History Facebook icon Twitter icon RRC Form H-11 Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Reference Material: RRC Form H-11 Details...

230

Paperclips Etc. Special Order Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PSS-02.2 (March 7, 2011) Replaces PSS-02.1 PSS-02.2 (March 7, 2011) Replaces PSS-02.1 PAPERCLIPS Etc. SPECIAL Orders Form This form is used to order supplies that are not readily available in the DOE HQ self-service supply stores or for items that require approval by Office Management. All supplies ordered MUST be used for Official Government Business only. Requestor's Name: ___________________________________________________ Date: __________________ Phone Number: __________________ DOE ID Badge No.: ________________________________________ Catalog Name: ______________________________________________________ Org Code: ______________ Item Number Page # Item Description Quantity Store Use Only ALL printed names (legible), signatures and dates are required before your Special order is processed.

231

WELLNESS LIFESTYLE AGREEMENT COMMITMENT FORM  

E-Print Network (OSTI)

WELLNESS LIFESTYLE AGREEMENT COMMITMENT FORM The Wellness Lifestyle Program is located in Reynolds will actively participate in the wellness program to make Reynolds Hall a healthy and supportive place or more consequences: conduct referral; administrative removal from the Wellness Program and

Weston, Ken

232

Spin-forming Project Report  

Science Conference Proceedings (OSTI)

In a second development order, spin-forming equipment was again evaluated using the test shape, a hemispherical shell. In this second development order, pure vanadium and alloy titanium (Ti-6Al-4V) were spin-formed, as well as additional copper and 21-6-9 stainless. In the first development order the following materials had been spin-formed: copper (alloy C11000 ETP), 6061 aluminum, 304L stainless steel, 21-6-9 stainless steel, and tantalum-2.5% tungsten. Significant challenges included properly adjusting the rotations-per-minute (RPM), cracking at un-beveled edges and laser marks, redressing of notches, surface cracking, non-uniform temperature evolution in the titanium, and cracking of the tailstock. Lessons learned were that 300 RPM worked better than 600 RPM for most materials (at the feed rate of 800 mm/min); beveling the edges to lower the stress reduces edge cracking; notches, laser marks, or edge defects in the preform doom the process to cracking and failure; coolant is required for vanadium spin-forming; increasing the number of passes to nine or more eliminates surface cracking for vanadium; titanium develops a hot zone in front of the rollers; and the tailstock should be redesigned to eliminate the cylindrical stress concentrator in the center.

Switzner, Nathan; Henry, Dick

2009-03-20T23:59:59.000Z

233

A simple proof of Jordan normal form  

E-Print Network (OSTI)

In this note, a simple proof Jordan normal form and rational form of matrices over a field is given.

Chen, Yuqun

2011-01-01T23:59:59.000Z

234

CONTACTS FOR INFORMATION MANAGEMENT: Forms, Information Collection...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CONTACTS FOR INFORMATION MANAGEMENT: Forms, Information Collection (PRA), & Records CONTACTS FOR INFORMATION MANAGEMENT: Forms, Information Collection (PRA), & Records Name Contact...

235

Applicability of slags as waste forms for hazardous waste  

SciTech Connect

Slags, which are a combination of glassy and ceramic phases, were produced by the Component Development and Integration Facility, using a combination of soil and metal feeds. The slags were tested for durability using accelerated test methods in both water vapor and liquid water for time periods up to 179 days. The results indicated that under both conditions there was little reaction of the slag, in terms of material released to solution, or the reaction of the slag to form secondary mineral phases. The durability of the slags tested exceeded that of current high-level nuclear glass formulations and are viable materials, for waste disposal.

Bates, J.K.; Buck, E.C.; Dietz, N.L.; Wronkiewicz, D.J.; Feng, X. [Argonne National Lab., IL (United States); Whitworth, C.; Filius, K.; Battleson, D. [MSE, Inc., Butte, MT (United States)

1994-07-01T23:59:59.000Z

236

Advanced manufacturing by spray forming: Aluminum strip and microelectromechanical systems  

SciTech Connect

Spray forming is an advanced materials processing technology that converts a bulk liquid metal to a near-net-shape solid by depositing atomized droplets onto a suitably shaped substrate. By combining rapid solidification processing with product shape control, spray forming can reduce manufacturing costs while improving product quality. INEL is developing a unique spray-forming method based on de Laval (converging/diverging) nozzle designs to produce near-net-shape solids and coatings of metals, polymers, and composite materials. Properties of the spray-formed material are tailored by controlling the characteristics of the spray plume and substrate. Two examples are described: high-volume production of aluminum alloy strip, and the replication of micron-scale features in micropatterned polymers during the production of microelectromechanical systems.

McHugh, K.M.

1994-12-31T23:59:59.000Z

237

2011Form EIA-902 Instructions  

U.S. Energy Information Administration (EIA) Indexed Site

FORM EIA-902 ANNUAL GEOTHERMAL HEAT PUMP SHIPMENTS REPORT GENERAL INFORMATION AND INSTRUCTIONS I. Purpose Form EIA-902 is designed to provide the data necessary for the U.S. Energy Information Administration (EIA), a part of the U.S. Department of Energy (DOE), to carry out its responsibilities tracking heat pump shipments in the geothermal heat pump industry and reporting information concerning the size and status of the industry. The data collected will be published in the Renewable Energy Annual and also be available through EIA's Internet site at http://www.eia.gov/fuelrenewable.html. II. Who Should Respond to This Survey This report is mandatory and required pursuant to the authority granted to the Department of Energy (DOE) by the Federal Energy Information Administration Act of 1974 (Public Law 93-

238

Method of forming clathrate ice  

DOE Patents (OSTI)

A method of forming clathrate ice in a supercooled water-based liquid contained in a vessel is disclosed. Initially, an oscillator device is located in the liquid in the vessel. The oscillator device is then oscillated ultrasonically so that small crystals are formed in the liquid. These small crystals serve as seed crystals for ice formation in the liquid and thereby prevent supercooling of the liquid. Preferably, the oscillating device is controlled by a thermostat which initiates operation of the oscillator device when the temperature of the liquid is lowered to the freezing point. Thereafter, the operation of the oscillator device is terminated when ice is sensed in the liquid by an ice sensor.

Hino, Toshiyuki (Tokyo, JP); Gorski, Anthony J. (Lemont, IL)

1987-01-01T23:59:59.000Z

239

Method of forming calthrate ice  

DOE Patents (OSTI)

A method of forming clathrate ice in a supercooled water-based liquid contained in a vessel is disclosed. Initially, an oscillator device is located in the liquid in the vessel. The oscillator device is then oscillated ultransonically so that small crystals are formed in the liquid. Thes small crystals serve as seed crystals for ice formation in the liquid and thereby prevent supercooling of the liquid. Preferably, the oscillating device is controlled by a thermostat which initiates operation of the oscillator device when the temperature of the liquid is lowered to the freezing point. Thereafter, the operation of the oscillator device is terminated when ice is sensed in the liquid by an ice sensor.

Hino, T.; Gorski, A.J.

1985-09-30T23:59:59.000Z

240

Combination of Manually Digitized Radar and GOES IR for Real-Time Display of Rainfall Intensity  

Science Conference Proceedings (OSTI)

Manually Digitized Radar (MDR) and Geostationary Operational Environmental Satellite (GOES) thermal infrared (IR) data were merged to form a higher-resolution radar/IR product than that represented by the MDR. The combination MDR/IR maps were ...

Paul H. Heinemann; J. David Martsolf; John F. Gerber; Daniel L. Smith

1987-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "form eia-920 combined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Lossless multi-way power combining and outphasing for radio frequency power amplifiers  

E-Print Network (OSTI)

For applications requiring the use of power amplifiers (PAs) operating at high frequencies and power levels, it is often preferable to construct multiple low power PAs and combine their output powers to form a high-power ...

Jurkov, Alexander S

2013-01-01T23:59:59.000Z

242

Distributed Generation as Combined Heat and Power (DG-CHP) (New...  

Open Energy Info (EERE)

Edit with form History Share this page on Facebook icon Twitter icon Distributed Generation as Combined Heat and Power (DG-CHP) (New York) This is the approved revision of...

243

DOE Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

U.S. Department of Energy Categorical Exclusion Determination Form Program or Field Office: Energy Efficiency and Conservation Block Grant Program Project Title CA-TRIBE-LOS COYOTES BAND OF CAHUILLA AND CUPENO INDIANS Location: Tribe CA-TRIBE-LOS COYOTES BAND OF CAHUILLA AND CUPENO INDIANS CA American Recovery and Reinvestment Act: Proposed Action or Project Description The Los Coyotes Band of Cahuilla and Cupeno Indians of California proposes to replace tribal members'

244

DOE Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

U.S. Department of Energy Categorical Exclusion Determination Form Program or Field Office: TRIBAL ENERGY PROGRAM Project Title SD-TEP-ROSEBUD SIOUX TRIBE Location: Tribal ROSEBUD SIOUX TRIBE SD American Recovery and Reinvestment Act: Proposed Action or Project Description The Rosebud Sioux Tribe (RST) and Citizens Wind propose to complete the required pre-construction activities necessary to secure funding for the proposed 190 MW North Antelope Highlands wind farm,

245

DOE Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

U.S. Department of Energy Categorical Exclusion Determination Form Program or Field Office: TRIBAL ENERGY PROGRAM NV Project Title NV-TEP-FALLON PAIUTE-SHOSHONE Location: Tribal FALLON PAIUTE-SHOSHONE American Recovery and Reinvestment Act: Proposed Action or Project Description The Fallon Paiute-Shoshone Tribe proposes to develop a sustainable energy park utilizing renewable energy resources at the Tribe's Reservation in Churchill County, Nevada. This proposed energy park

246

DOE Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

U.S. Department of Energy Categorical Exclusion Determination Form Program or Field Office: TRIBAL ENERGY PROGRAM OK Project Title OK-TEP-CHEROKEE NATION BUSINESSES Location: Tribal CHEROKEE NATION BUSINESSES American Recovery and Reinvestment Act: Proposed Action or Project Description The Cherokee Wind Energy Development proposed project is for development, design, and installation of a 127.5 megawatt wind farm to offset Tribal electrical load; sell excess electricity to local, regional, and

247

Combined Corex/DRI technology  

Science Conference Proceedings (OSTI)

A feasible steelmaking alternative, the Corex/direct reduction/electric arc furnace combination, provides an economic route for the production of high quality steel products. This combination is a major step into a new generation of iron and steel mills. These mills are based on the production of liquid steel using noncoking coal and comply with the increasing demands of environmental protection. The favorable production costs are based on: Utilization of Corex and DRI/HBI plants; Production of hot metal equal to blast furnace quality; Use of low cost raw materials such as noncoking coal and lump ore; Use of process gas as reducing agent for DRI/HBI production; and Use of electric arc furnace with high hot metal input as the steelmaking process. The high flexibility of the process permits the adjustment of production in accordance with the strategy of the steel mills. New but proven technologies and applications of the latest state of art steelmaking process, e.g., Corex, in conjunction with DRI production as basic raw material for an electric arc furnace, will insure high quality, high availability, optimized energy generation at high efficiency rates, and high product quality for steelmaking.

Flickenschild, A.J.; Reufer, F. [Deutsche Voest-Alpine Industrieanlagenbau GmbH, Dusseldorf (Germany); Eberle, A.; Siuka, D. [Voest-Alpine Industrieanlagenbau, Linz (Austria)

1996-08-01T23:59:59.000Z

248

Weak Energy: Form and Function  

E-Print Network (OSTI)

The equation of motion for a time-independent weak value of a quantum mechanical observable contains a complex valued energy factor - the weak energy of evolution. This quantity is defined by the dynamics of the pre-selected and post-selected states which specify the observable's weak value. It is shown that this energy: (i) is manifested as dynamical and geometric phases that govern the evolution of the weak value during the measurement process; (ii) satisfies the Euler-Lagrange equations when expressed in terms of Pancharatnam (P) phase and Fubini-Study (FS) metric distance; (iii) provides for a PFS stationary action principle for quantum state evolution; (iv) time translates correlation amplitudes; (v) generalizes the temporal persistence of state normalization; and (vi) obeys a time-energy uncertainty relation. A similar complex valued quantity - the pointed weak energy of an evolving state - is also defined and several of its properties in PFS-coordinates are discussed. It is shown that the imaginary part of the pointed weak energy governs the state's survival probability and its real part is - to within a sign - the Mukunda-Simon geometric phase for arbitrary evolutions or the Aharonov-Anandan (AA) phase for cyclic evolutions. Pointed weak energy gauge transformations and the PFS 1-form are discussed and the relationship between the PFS 1-form and the AA connection 1-form is established.

Allen D. Parks

2013-04-09T23:59:59.000Z

249

Combined power plants -- Past, present, and future  

Science Conference Proceedings (OSTI)

The early history of combined power plants is described, together with the birth of the CCGT plant (the combined cycle gas turbine). Sustained CCGT development in the 1970s and 1980s, based on sound thermodynamic considerations, is outlined. Finally more recent developments and future prospects for the combined gas turbine/steam turbine combined plant are discussed.

Horlock, J.H. [Whittle Lab., Cambridge (United Kingdom)

1995-10-01T23:59:59.000Z

250

Combination drilling and skiving tool  

DOE Patents (OSTI)

A combination drilling and skiving tool including a longitudinally extending hollow skiving sleeve slidably and concentrically mounted on a right-handed twist drill. Dogs or pawls provided on the internal periphery of the skiving sleeve engage with the helical grooves of the drill. During a clockwise rotation of the tool, the drill moves downwardly and the sleeve translates upwardly, so that the drill performs a drilling operation on a workpiece. On the other hand, the drill moves upwardly and the sleeve translates downwardly, when the tool is rotated in a counter-clockwise direction, and the sleeve performs a skiving operation. The drilling and skiving operations are separate, independent and exclusive of each other.

Stone, William J. (Kansas City, MO)

1989-01-01T23:59:59.000Z

251

Efficiency combined cycle power plant  

SciTech Connect

This patent describes a method of operating a combined cycle power plant. It comprises: flowing exhaust gas from a combustion turbine through a heat recovery steam generator (HRSG); flowing feed water through an economizer section of the HRSG at a flow rate and providing heated feed water; flowing a first portion of the heated feed water through an evaporator section of the HRSG and producing saturated steam at a production rate, the flow rate of the feed water through the economizer section being greater than required to sustain the production rate of steam in the evaporator section; flowing fuel for the turbine through a heat exchanger; and, flowing a second portion of the heated feed water provided by the economizer section through the heat exchanger then to an inlet of the economizer section, thereby heating the fuel flowing through the heat exchanger.

Pavel, J.; Meyers, G.A.; Baldwin, T.S.

1990-06-12T23:59:59.000Z

252

NREL: Climate Neutral Research Campuses - Combined Heat and Power  

NLE Websites -- All DOE Office Websites (Extended Search)

Combined Heat and Power Combined Heat and Power Combined heat and power (CHP) systems on research campuses can reduce climate impact by 15% to 30% and yield a positive financial return, because they recover heat that is typically wasted in the generation of electric power and deliver that energy in a useful form. The following links go to sections that describe how CHP may fit into your climate action plans. Considerations Sample Project Related Links CHP systems can take advantage of large central heating plants and steam distribution systems that are available on many campuses. CHP systems may be new at a particular facility, but the process and equipment involve well-established industrial technologies. The U.S. Environmental Protection Agency CHP Partnership offers technical information and resources that

253

DOE Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

U.S. Department of Energy Categorical Exclusion Determination Form Program or Field Office: TRIBAL ENERGY PROGRAM NV Project Title NV-TEP-WASHOE WISK'E'EM PROJECT Location: Tribal WASHOE WISK'E'EM PROJECT American Recovery and Reinvestment Act: Proposed Action or Project Description The Washoe Tribe of Nevada and California (Washoe Tribe) proposes to install four small (approximately 1.0-1.5 kW) vertical wind turbines at designated locations on Tribal lands to offset energy costs for the

254

FORMING PROTECTIVE FILMS ON METAL  

DOE Patents (OSTI)

Methods are described of inhibiting the corrosion of ferrous metal by contact with heavy liquid metals such as bismuth and gallium at temperatures above 500 icient laborato C generally by bringing nltrogen and either the metal zirconium, hafnium, or titanium into reactlve contact with the ferrous metal to form a thin adherent layer of the nitride of the metal and thereafter maintaining a fractional percentage of the metal absorbed in the heavy liquid metal in contact with the ferrous metal container. The general purpose for uslng such high boiling liquid metals in ferrous contalners would be as heat transfer agents in liquid-metal-fueled nuclear reactors.

Gurinsky, D.H.; Kammerer, O.F.; Sadofsky, J.; Weeks, J.R.

1958-12-16T23:59:59.000Z

255

Transmission electron microscopy analysis of corroded metal waste forms.  

SciTech Connect

This report documents the results of analyses with transmission electron microscopy (TEM) combined with energy dispersive X-ray spectroscopy (EDS) and selected area electron diffraction (ED) of samples of metallic waste form (MWF) materials that had been subjected to various corrosion tests. The objective of the TEM analyses was to characterize the composition and microstructure of surface alteration products which, when combined with other test results, can be used to determine the matrix corrosion mechanism. The examination of test samples generated over several years has resulted in refinements to the TEM sample preparation methods developed to preserve the orientation of surface alteration layers and the underlying base metal. The preservation of microstructural spatial relationships provides valuable insight for determining the matrix corrosion mechanism and for developing models to calculate radionuclide release in repository performance models. The TEM results presented in this report show that oxide layers are formed over the exposed steel and intermetallic phases of the MWF during corrosion in aqueous solutions and humid air at elevated temperatures. An amorphous non-stoichiometric ZrO{sub 2} layer forms at the exposed surfaces of the intermetallic phases, and several nonstoichiometric Fe-O layers form over the steel phases in the MWF. These oxide layers adhere strongly to the underlying metal, and may be overlain by one or more crystalline Fe-O phases that probably precipitated from solution. The layer compositions are consistent with a corrosion mechanism of oxidative dissolution of the steel and intermetallic phases. The layers formed on the steel and intermetallic phases form a continuous layer over the exposed waste form, although vertical splits in the layer and corrosion in pits and crevices were seen in some samples. Additional tests and analyses are needed to verify that these layers passivate the underlying metals and if passivation can break down as the MWF corrodes. The importance of localized corrosion should also be determined.

Dietz, N. L.

2005-04-15T23:59:59.000Z

256

Integrally formed radio frequency quadrupole  

DOE Patents (OSTI)

An improved radio frequency quadrupole (10) is provided having an elongate housing (11) with an elongate central axis (12) and top, bottom and two side walls (13a-d) symmetrically disposed about the axis, and vanes (14a-d) formed integrally with the walls (13a-d), the vanes (14a-d) each having a cross-section at right angles to the central axis (12) which tapers inwardly toward the axis to form electrode tips (15a-d) spaced from each other by predetermined distances. Each of the four walls (13a-d), and the vanes (14a-d) integral therewith, is a separate structural element having a central lengthwise plane (16) passing through the tip of the vane, the walls (13a-d) having flat mounting surfaces (17, 18) at right angles to and parallel to the control plane (16), respectively, which are butted together to position the walls and vane tips relative to each other.

Abbott, Steven R. (Concord, CA)

1989-01-01T23:59:59.000Z

257

FermiCulture Subscription Form  

NLE Websites -- All DOE Office Websites (Extended Search)

The FermiCulture email list is used to send email announcements and reminders about upcoming cultural events at Fermilab (e.g., the Fermilab Arts, Film, and Lecture series). This is a private, announcement-only mail list and will never be used for spamming or discussions. Subscribers receive approximately five emails per month. Use the form below to subscribe to (or unsubscribe from) the FermiCulture list. The FermiCulture email list is used to send email announcements and reminders about upcoming cultural events at Fermilab (e.g., the Fermilab Arts, Film, and Lecture series). This is a private, announcement-only mail list and will never be used for spamming or discussions. Subscribers receive approximately five emails per month. Use the form below to subscribe to (or unsubscribe from) the FermiCulture list. Email address: Name (First Last): Subscribe to email list Unsubscribe from email list Send Reset The Regular Mailing List If you would like to receive mailings through the regular mail of upcoming cultural events at Fermilab and are not on our mailing list, then please fill out the information below. Name: Address: City: State: Zip: Country: E-mail:

258

Combined current collector and electrode separator  

DOE Patents (OSTI)

This relates to reactive metal cells wherein there is a cathode and a consumable anode. It is necessary to separate the cathode from the anode so that an electrolyte may constantly flow over the face of the anode opposing the cathode. It has been found that this separator may also beneficially function as a current collector. The combined current collector and separator includes a peripheral supporting frame of which a portion may function as a bus-bar. A plurality of bars or ribs extend in parallel relation across the opening defined by the supporting frame and are electrically connected to the bus-bar portion. It is preferred that each bar or rib have a pointed or line edge which will engage and slightly bite into the associated anode to maintain the bar or rib in electrical contact with the anode. This abstract forms no part of the specification of this application and is not to be construed as limiting the claims of the application. 6 figs.

Gerenser, R.J.; Littauer, E.L.

1983-08-23T23:59:59.000Z

259

DUF6 EIS Public Comment Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Public Comment Form Public Comment Form The public comment period for the Depleted UF6 Supplemental Analysis is closed. The public comment form is no longer available. Sorry The...

260

CAIRS Registration Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

HSS InfoCenter at (301) 903-9823 CAIRS Registration Form More Documents & Publications ORPS User Registration Form Fire Protection System Account Request Form Policy Flash 2013-15...

Note: This page contains sample records for the topic "form eia-920 combined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

How is an egg shell formed?  

NLE Websites -- All DOE Office Websites (Extended Search)

How is an egg shell formed? Name: Tim Location: NA Country: NA Date: NA Question: How is an egg shell formed? Replies: Egg shells are formed by a complex interaction between a...

262

Form:Property | Open Energy Information  

Open Energy Info (EERE)

Form Edit History Facebook icon Twitter icon Form:Property Jump to: navigation, search Form to create Properties. Enter a name and the Property will be created in Property...

263

Document Control Template-Form  

NLE Websites -- All DOE Office Websites (Extended Search)

4 Publication Review and Approval 11_0608.doc608 Page 1 of 3 4 Publication Review and Approval 11_0608.doc608 Page 1 of 3 EOTA - Business Form Document Title: Publication Review and Approval Document Number: ITTF-014 Rev. 11_0608 Document Owner: Ben Aragon Backup Owner: Janet Lee Approver(s): Melissa Otero Parent Document: ITTP-015 Website Development Maintenance Notify of Changes: EOTA Employees Referenced Document(s): N/A ITTF-014 Publication Review and Approval 11_0608.doc608 Page 2 of 3 Revision History: Rev. Description of Changes A Initial Release 08_0523 Added review section for QA. Added "Approved w/changes" section. Changed "Corrections" and "Reason" to "Recommendations". Adjusted spacing on document. 08_1105 Added review section for Project Manager. Adjusted spacing on document.

264

Form factors from lattice QCD  

Science Conference Proceedings (OSTI)

Precision computation of hadronic physics with lattice QCD is becoming feasible. The last decade has seen precent-level calculations of many simple properties of mesons, and the last few years have seen calculations of baryon masses, including the nucleon mass, accurate to a few percent. As computational power increases and algorithms advance, the precise calculation of a variety of more demanding hadronic properties will become realistic. With this in mind, I discuss the current lattice QCD calculations of generalized parton distributions with an emphasis on the prospects for well-controlled calculations for these observables as well. I will do this by way of several examples: the pion and nucleon form factors and moments of the nucleon parton and generalized-parton distributions.

Dru Renner

2012-04-01T23:59:59.000Z

265

Miscellaneous Waste-Form FEPs  

SciTech Connect

The US DOE must provide a reasonable assurance that the performance objectives for the Yucca Mountain Project (YMP) potential radioactive-waste repository can be achieved for a 10,000-year post-closure period. The guidance that mandates this direction is under the provisions of 10 CFR Part 63 and the US Department of Energy's ''Revised Interim Guidance Pending Issuance of New US Nuclear Regulatory Commission (NRC) Regulations (Revision 01, July 22, 1999), for Yucca Mountain, Nevada'' (Dyer 1999 and herein referred to as DOE's Interim Guidance). This assurance must be demonstrated in the form of a performance assessment that: (1) identifies the features, events, and processes (FEPs) that might affect the performance of the potential geologic repository; (2) examines the effects of such FEPs on the performance of the potential geologic repository; (3) estimates the expected annual dose to a specified receptor group; and (4) provides the technical basis for inclusion or exclusion of specific FEPs.

A. Schenker

2000-12-08T23:59:59.000Z

266

Labor Standards Interview Form | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Standards Interview Form Labor Standards Interview Form SF 1445.pdf More Documents & Publications Labor Standards for Construction Chapter 22 - Labor Standards for Construction CRB...

267

DOE Forms Management FAQ's | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Departmental Form (developed for use department-wide by DOE personnel only) Headquarters (HQ) Form (developed or managed by a DOE Headquarters organization and are generally for...

268

Fermilab at Work | Manuals and Forms  

NLE Websites -- All DOE Office Websites (Extended Search)

Performance Appraisal Forms Procedures for Researchers (PFX) Records Storage (RSD) Form Safety Manuals Time and Labor Reporting Tune IT Up Travel Policies Last modified: 0220...

269

Change Request Forms | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Link - Under Development NMMSS Change of Authorized Contacts Response Form (Last updated: August 14, 2013) NMMSS Change of Project Number Response Form (Last updated: August 14,...

270

Form:Utility Rate | Open Energy Information  

Open Energy Info (EERE)

Form Edit History Facebook icon Twitter icon Form:Utility Rate Jump to: navigation, search Add or Update Utility Rate Information Retrieved from "http:en.openei.orgw...

271

Form:ExplorationActivity | Open Energy Information  

Open Energy Info (EERE)

Form Edit History Facebook icon Twitter icon Form:ExplorationActivity Jump to: navigation, search Input a name below to add an "Exploration Activity'. If the activity already...

272

RRC Form H-1 | Open Energy Information  

Open Energy Info (EERE)

Login | Sign Up Search Page Edit with form History Facebook icon Twitter icon RRC Form H-1 Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Reference...

273

Form design of product image using grey relational analysis and neural network models  

Science Conference Proceedings (OSTI)

This paper presents a new approach to determining the best design combination of product form elements for matching a given product image represented by a word pair. A grey relational analysis (GRA) model is used to examine the relationship between product ... Keywords: Kansei Engineering, grey prediction, grey relational analysis, neural networks, product form, product image

Hsin-Hsi Lai; Yang-Cheng Lin; Chung-Hsing Yeh

2005-10-01T23:59:59.000Z

274

Combined Analysis: structure-texture-microstructure-phase-  

E-Print Network (OSTI)

Combined Analysis: structure-texture-microstructure-phase- stresses-reflectivity determination by x #12;Combined Analysis: structure-texture-microstructure-phase-stresses- reflectivity determination ................................................................................................. 83 2.10.1 The phase problem in diffraction

Paris-Sud XI, Université de

275

Machine translation system combination by confusion forest  

Science Conference Proceedings (OSTI)

The state-of-the-art system combination method for machine translation (MT) is based on confusion networks constructed by aligning hypotheses with regard to word similarities. We introduce a novel system combination framework in which hypotheses are ...

Taro Watanabe; Eiichiro Sumita

2011-06-01T23:59:59.000Z

276

Model combination by decomposition and aggregation  

E-Print Network (OSTI)

This thesis focuses on a general problem in statistical modeling, namely model combination. It proposes a novel feature-based model combination method to improve model accuracy and reduce model uncertainty. In this method, ...

Xu, Mingyang, 1974-

2004-01-01T23:59:59.000Z

277

Improving abstract interpretations by combining domains  

Science Conference Proceedings (OSTI)

In this paper we consider static analyses based on abstract interpretation of logic programs over combined domains. It is known that analyses over combined domains potentially provide more information than obtainable by performing the independent abstract ...

M. Codish; A. Mulkers; M. Bruynooghe; M. García de la Banda; M. Hermenegildo

1993-08-01T23:59:59.000Z

278

Industrial Distributed Energy: Combined Heat & Power  

Energy.gov (U.S. Department of Energy (DOE))

Information about the Department of Energy’s Industrial Technologies Program and its Combined Heat and Power program.

279

Combined Cycle Performance Tracking Guideline: Interim Report  

Science Conference Proceedings (OSTI)

The Electric Power Research Institute’s (EPRI’s) Combined Cycle Performance Monitoring and Recovery Guideline (EPRI report 1023971) was developed in 2012 to provide plant owners and operators with a comprehensive guideline for identifying and quantifying combined-cycle performance losses and appropriate recovery activities for a generic F-Class combined-cycle power plant (CCPP). This report, Combined-Cycle Performance Tracking Guideline, has been developed as an adjunct ...

2013-12-23T23:59:59.000Z

280

Results from Combined NMR and Electrochemical Impedance ...  

Science Conference Proceedings (OSTI)

Presentation Title, Oxygen-vacancy Transport in Heavily Doped Cubic Zirconia: Results from Combined NMR and Electrochemical Impedance Spectroscopies.

Note: This page contains sample records for the topic "form eia-920 combined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Combined cycle total energy system  

SciTech Connect

A system is described for the co-generation of steam and electricity comprising: a source of gaseous fuel, a source of air, means for mixing the fuel and air to form a relatively lean fuel/air mixture, a gas turbine, a first fuel/air mixture compressor directly driven by the turbine, a second fuel/air mixture compressor driven by the turbine for further compressing the fuel/air mixture, a catalytic burner between the second compressor and gas turbine, a motor/generator, a steam turbine, means coupling the gas turbine, motor/generator, first and second compressors and steam turbine to one another, a source of water, a steam boiler connected to the source of water and to the exhaust system of the gas turbine, a steam economizer connected to the boiler, a steam superheater in heat exchange relationship with the exhaust system of the gas turbine disposed between the economizer and the steam turbine, and controllable means for bypassing superheated steam from the superheater around the steam turbine to maximize steam or electric power output of the system selectively.

Joy, J.R.

1986-06-17T23:59:59.000Z

282

Canonical Forms for Symmetric and Regular Structures  

Science Conference Proceedings (OSTI)

Matrices associated with symmetric and regular structures can be arranged into certain block patterns known as Canonical forms. Using such forms, the decomposition of structural matrices into block diagonal forms, is considerably simplified. In this ... Keywords: 15A18, 74S05, Block diagonalization, Decomposition, Group theory, Matrix canonical form, Regular structure, Symmetric structure

Ali Kaveh; H. Fazli

2012-06-01T23:59:59.000Z

283

Environmental Degradation Nuclear IX-Housing Form  

Science Conference Proceedings (OSTI)

ENVIRONMENTAL DEGRADATION OF MATERIALS IN NUCLEAR POWER SYSTEMS—WATER REACTORS. HOUSING. RESERVATION FORM.

284

EIA - 2008 New Electric Power Forms  

Gasoline and Diesel Fuel Update (EIA)

New Electricity Survey Forms New Electricity Survey Forms What's happening with electric power forms? In 2008 EIA is consolidating 6 data collection forms into 2 forms. Fill out forms electronically (Available soon!) Not registered? Why is that a good thing? * For Electricity Generators: This reduces the number of forms to submit. (Re-registering is not required!) * For EIA and Taxpayers: This streamlines the collection process for better efficiency. * For Everyone: This enables us to provide additional information about the electric power industry. figure showing what electricity forms merge into the new forms Click for more information on the New EIA-860 Click for more information on the New EIA-923 Resources to help you with the changes Printable Forms & Instructions 923 860

285

Electric Power detailed State data  

U.S. Energy Information Administration (EIA) Indexed Site

Detailed State Data Detailed State Data Annual data for 2012 Release Date: November 12, 2013 Next Release Date: November 2014 Revision/Corrections Annual data format 1990 - 2012 Net Generation by State by Type of Producer by Energy Source (EIA-906, EIA-920, and EIA-923)1 XLS 1990 - 2012 Fossil Fuel Consumption for Electricity Generation by Year, Industry Type and State (EIA-906, EIA-920, and EIA-923)2 XLS 1990 - 2011 Existing Nameplate and Net Summer Capacity by Energy Source, Producer Type and State (EIA-860)1, 3 XLS 2011 - 2016 Proposed Nameplate and Net Summer Capacity by Year, Energy Source, and State (EIA-860)1 XLS 1990 - 2011 U.S. Electric Power Industry Estimated Emissions by State (EIA-767, EIA-906, EIA-920, and EIA-923)4 XLS 1990 - 2012 Average Price by State by Provider (EIA-861)5 XLS

286

Change Request Forms | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Change Request Forms | National Nuclear Security Administration Change Request Forms | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Change Request Forms Home > About Us > Our Programs > Nuclear Security > Nuclear Materials Management & Safeguards System > NMMSS Information, Reports & Forms > Change Request Forms Change Request Forms

287

Improving abstract interpretations by combining domains  

E-Print Network (OSTI)

This article considers static analysis based on abstract interpretation of logic programs over combined domains. It is known that analyses over combined domains provide more information potentially than obtained by the independent analyses. However, the construction of a combined analysis often requires redefining the basic operations for the combined domain. A practical ap-proach to maintain precision in combined analyses of logic programs which reuses the individual analyses and does not redefine the basic operations is illustrated, The advantages of the approach are that (1) proofs of correctness for the new domains are not required and (2) implementations can be reused. The approach is demonstrated by showing that a combined sharing analysis — constructed from “old” proposals — compares well with other “new” proposals suggested in recent

Michael Codish; Anne Mulkers; Maurice Bruynooghe; Maria Garcia De La Banda; Manuel Hermenegildo

1995-01-01T23:59:59.000Z

288

Combined Heat and Power (CHP) Systems | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technology Development » Smart Grid » Distributed Technology Development » Smart Grid » Distributed Energy » Combined Heat and Power (CHP) Systems Combined Heat and Power (CHP) Systems The CHP systems program aimed to facilitate acceptance of distributed energy in end-use sectors by forming partnerships with industry consortia in the commercial building, merchant stores, light industrial, supermarkets, restaurants, hospitality, health care and high-tech industries. In high-tech industries such as telecommunications, commercial data processing and internet services, the use of electronic data and signal processing have become a cornerstone in the U.S. economy. These industries represent high potential for CHP and distributed energy due to their ultra-high reliability and power quality requirements and related large

289

A Dark Energy model combining DGP gravity and Chaplygin gas  

E-Print Network (OSTI)

The expansion of the Universe is accelerating, as testified by observations of supernovae of type Ia as a function of redshift. Explanations are of two types: modifications of Einstein gravity or new forms of energy, coined dark energy.The accelerated expansion is explained here by a combination of Dvali-Gabadadze-Porrati (DGP) model gravity and Chaplygin gas dark energy. Both models are characterized by a length scale L which may be the same. The continuity equation for the combined model is derived in flat geometry, and solved by numerical methods. The solution is shown to have the expected properties: at very small scales (aenergy density behaves as pressureless dust, at very large scales (a>>L) as a cosmological constant. The modifications to the DGP model and the Chaplygin gas model occur for values of a L. The results show an increase in the present dark energy density relative to the plain DGP model.

Matts Roos

2007-04-06T23:59:59.000Z

290

Ultrasonic Fatigue Testing System Combined with Nondestructive ...  

Science Conference Proceedings (OSTI)

Presentation Title, Ultrasonic Fatigue Testing System Combined with ... High and Very High Cycle Fatigue in Al and Cu Thin Films on Si Substrate.

291

Duke Energy's Edwardsport Integrated Gasification Combined Cycle...  

NLE Websites -- All DOE Office Websites (Extended Search)

Duke Energy's Edwardsport Integrated Gasification Combined Cycle (IGCC) Station presently under construction in Knox County, Indiana. (Photos courtesy of Duke Energy.) Gasification...

292

Enhancing Open Circuit Voltage by Combining Thermoelectric ...  

Science Conference Proceedings (OSTI)

Enhancing Open Circuit Voltage by Combining Thermoelectric Materials and Dye -Sensitized Solar Cell in Series · Estimation of Compressive Strength of High ...

293

Combining Nanotubes and Antibodies for Breast Cancer ' ...  

Science Conference Proceedings (OSTI)

... of the special combination—the antibody and the nanotube—have critical ... The carbon nanotubes attached to the antibodies also become linked to ...

2012-10-15T23:59:59.000Z

294

The Materials Project: Combining Quantum Chemistry Calculations...  

NLE Websites -- All DOE Office Websites (Extended Search)

The Materials Project: Combining Quantum Chemistry Calculations with Supercomputing Centers for New Materials Discovery Speaker(s): Anubhav Jain Date: December 18, 2012 - 12:00pm...

295

Musical form in non-narrative video  

E-Print Network (OSTI)

"Musical Form in Non- Narrative Video" explores musical structure as a model for visual form over time, specifically in the creation of artistic video. Video is a medium in which sound and image coexist at the source as ...

Sebring, Ellen Irene

1986-01-01T23:59:59.000Z

296

FINAL STAFF REPORT FORMS AND INSTRUCTIONS FOR  

E-Print Network (OSTI)

is acceptable, but a narrative should explain the units reported (for example, number of customers or number .................................................9 Form 1.3 Peak Demand by Sector (Bundled Customers..................................................................................................12 Form 2.3 Customer Counts and Other Inputs

297

Form:Buildings Model | Open Energy Information  

Open Energy Info (EERE)

Buildings Model Jump to: navigation, search This is the 'Buildings Model' form. To add a page with this form, enter the page name below; if a page with that name already exists,...

298

Form:Buildings Publication | Open Energy Information  

Open Energy Info (EERE)

Buildings Publication Jump to: navigation, search This is the 'Buildings Publication' form. To add a page with this form, enter the page name below; if a page with that name...

299

FORMS AND INSTRUCTIONS FOR SUBMITTING ELECTRIC  

E-Print Network (OSTI)

CALIFORNIA ENERGY COMMISSION FORMS AND INSTRUCTIONS FOR SUBMITTING ELECTRIC TRANSMISSION Instructions for Electric Transmission Forms ............................................................. 6 Electric transmission, transmission corridor, data request. #12;1 Background The California Energy

300

Metered Mail Form International Mail Only  

E-Print Network (OSTI)

Metered Mail Form International Mail Only Charge to Department USPS First Class Mail International International Metered Mail Form and must be kept separate from all other domestic mail. · International mail

Palmeri, Thomas

Note: This page contains sample records for the topic "form eia-920 combined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Form W-9 (Rev. January 2011)  

NLE Websites -- All DOE Office Websites (Extended Search)

to establish your U.S. status and avoid withholding on your share of partnership income. Cat. No. 10231X Form W-9 (Rev. 1-2011) Form W-9 (Rev. 1-2011) Page 2 The person who gives...

302

Appendix C - Forms for Reporting State Data  

NLE Websites -- All DOE Office Websites (Extended Search)

C - Forms for Reporting State Data Copies of the two forms used by States to report motor fuel use are attached. FHWA-551M reports a monthly consumption of motor fuel. (2 page...

303

Form:RRSection | Open Energy Information  

Open Energy Info (EERE)

Form Edit History Facebook icon Twitter icon Form:RRSection Jump to: navigation, search Enter the title of the Geothermal Regulatory Roadmap section you would like to create. If...

304

Form:Utility Company | Open Energy Information  

Open Energy Info (EERE)

Form Edit History Facebook icon Twitter icon Form:Utility Company Jump to: navigation, search Input your utility company name below to add to the registry. If the company is...

305

Microsoft Word - Epoxy Usage Form.docx  

NLE Websites -- All DOE Office Websites (Extended Search)

Division Form Rev. 41111 Monthly Epoxy Usage Form (Weight in Grams) Date Initials CTD 101K Stycast Catalyst Epon Resin Epicure Part A Part B Part C 2850 24LV 815828 3140...

306

An Alternative Form for Potential Vorticity  

Science Conference Proceedings (OSTI)

A form of potential vorticity is described that has conservation properties similar to those of Ertel's potential vorticity (EPV) but removes the exponential variation with height displayed by EPV. This form is thus more suitable for inspecting ...

Leslie R. Lait

1994-06-01T23:59:59.000Z

307

Combination spindle-drive system for high precision machining  

DOE Patents (OSTI)

A combination spindle-drive is provided for fabrication of optical quality surface finishes. Both the spindle-and-drive utilize the spindle bearings for support, thereby removing the conventional drive-means bearings as a source of vibration. An airbearing spindle is modified to carry at the drive end a highly conductive cup-shaped rotor which is aligned with a stationary stator to produce torque in the cup-shaped rotor through the reaction of eddy currents induced in the rotor. This arrangement eliminates magnetic attraction forces and all force is in the form of torque on the cup-shaped rotor.

Gerth, Howard L. (Knoxville, TN)

1977-07-26T23:59:59.000Z

308

On a New Form of Quantum Mechanics  

E-Print Network (OSTI)

We propose a new form of nonrelativistic quantum mechanics which is based on a quantum version of the action principle.

N. N. Gorobey; A. S. Lukyanenko

2008-07-22T23:59:59.000Z

309

Electronic Comment Form | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Electronic Comment Form | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response...

310

Employee Concerns Reporting Form | National Nuclear Security...  

National Nuclear Security Administration (NNSA)

Reporting Form | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing...

311

Form EIA-860 Annual Electric Generator Report | OpenEI  

Open Energy Info (EERE)

761 761 Varnish cache server Browse Upload data GDR 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation: XID: 2142263761 Varnish cache server Form EIA-860 Annual Electric Generator Report Dataset Summary Description The Form EIA-860 is a generator-level survey that collects specific information about existing and planned generators and associated environmental equipment at electric power plants with 1 megawatt or greater of combined nameplate capacity. The survey data is summarized in reports such as the Electric Power Annual. The survey data is also available for download here. The data are compressed into a self-extracting (.exe) zip folder containing .XLS data files and record layouts. The current file structure (starting with 2009 data) consists

312

Improving abstract interpretations by combining domains  

Science Conference Proceedings (OSTI)

This article considers static analysis based on abstract interpretation of logic programs over combined domains. It is known that analyses over combined domains provide more information potentially than obtained by the independent analyses. However, ... Keywords: abstract interpretation, logic programming, program analysis

Michael Codish; Anne Mulkers; Maurice Bruynooghe; Maria García de la Banda; Manuel Hermenegildo

1995-01-01T23:59:59.000Z

313

Combined Heat and Power | Open Energy Information  

Open Energy Info (EERE)

Combined Heat and Power Combined Heat and Power Jump to: navigation, search All power plants release a certain amount of heat during electricity generation. This heat can be used to serve thermal loads, such as building heating and hot water requirements. The simultaneous production of electrical (or mechanical) and useful thermal power from a single source is referred to as a combined heat and power (CHP) process, or cogeneration. Contents 1 Combined Heat and Power Basics 2 Fuel Types 2.1 Rural Resources 2.2 Urban Resources 3 CHP Technologies 3.1 Steam Turbine 3.2 Gas Turbine 3.3 Microturbine 3.4 Reciprocating Engine 4 Example CHP Systems[7] 4.1 University of Missouri (MU) 4.2 Princeton University 4.3 University of Iowa 4.4 Cornell University 5 Glossary 6 References Combined Heat and Power Basics

314

ORPS Facility Registration Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Facility Registration Form Facility Registration Form ORPS Facility Registration Form August 9, 2007 Add, Change or Delete a Facility for Occurrence Reporting and Processing System Submit completed form to: U.S. Department of Energy HSS InfoCenter, HS-1.22, 270CC 1000 Independence Ave., SW Washington, DC 20585-0270 FAX: 301-903-9823 PHONE: 800-473-4375 Note: Only one facility per form Type or print all entries TYPE OF CHANGE: Add a Facility (Complete Section 1.A, then go to Section 2) Change a Facility (Complete Section 1.B, then go to Section) Delete a Facility (Complete Section 1.C, then go to Section 2) ORPS Facility Registration Form More Documents & Publications ORPS User Registration Form DOE-TSPP-9, Maintenance of DOE Technical Standards - August 1, 2000 EA-1442: Final Environmental Assessment

315

Prediction of Gas Leak Tightness of Superplastically Formed Products  

Science Conference Proceedings (OSTI)

In some applications, in this case an aluminium box in a subatomic particle detector containing highly sensitive detecting devices, it is important that a formed sheet should show no gas leak from one side to the other. In order to prevent a trial-and-error procedure to make this leak tight box, a method is set up to predict if a formed sheet conforms to the maximum leak constraint. The technique of superplastic forming (SPF) is used in order to attain very high plastic strains before failure. Since only a few of these boxes are needed, this makes, this generally slow, process an attractive production method. To predict the gas leak of a superplastically formed aluminium sheet in an accurate way, finite element simulations are used in combination with a user-defined material model. This constitutive model couples the leak rate with the void volume fraction. This void volume fraction is then dependent on both the equivalent plastic strain and the applied hydrostatic pressure during the bulge process (backpressure).

Snippe, Corijn H. C. [National Institute for Subatomic Physics (Nikhef) PO Box 41882, 1009 DB Amsterdam (Netherlands); Meinders, T. [University of Twente, Faculty of Engineering Technology PO Box 217, 7500 AE Enschede (Netherlands)

2010-06-15T23:59:59.000Z

316

Electrohydraulic Forming of Near-Net Shape Automotive Panels  

SciTech Connect

The objective of this project was to develop the electrohydraulic forming (EHF) process as a near-net shape automotive panel manufacturing technology that simultaneously reduces the energy embedded in vehicles and the energy consumed while producing automotive structures. Pulsed pressure is created via a shockwave generated by the discharge of high voltage capacitors through a pair of electrodes in a liquid-filled chamber. The shockwave in the liquid initiated by the expansion of the plasma channel formed between two electrodes propagates towards the blank and causes the blank to be deformed into a one-sided die cavity. The numerical model of the EHF process was validated experimentally and was successfully applied to the design of the electrode system and to a multi-electrode EHF chamber for full scale validation of the process. The numerical model was able to predict stresses in the dies during pulsed forming and was validated by the experimental study of the die insert failure mode for corner filling operations. The electrohydraulic forming process and its major subsystems, including durable electrodes, an EHF chamber, a water/air management system, a pulse generator and integrated process controls, were validated to be capable to operate in a fully automated, computer controlled mode for forming of a portion of a full-scale sheet metal component in laboratory conditions. Additionally, the novel processes of electrohydraulic trimming and electrohydraulic calibration were demonstrated at a reduced-scale component level. Furthermore, a hybrid process combining conventional stamping with EHF was demonstrated as a laboratory process for a full-scale automotive panel formed out of AHSS material. The economic feasibility of the developed EHF processes was defined by developing a cost model of the EHF process in comparison to the conventional stamping process.

Golovaschenko, Sergey F.

2013-09-26T23:59:59.000Z

317

Crankshaft position sensing with combined starter alternator  

DOE Patents (OSTI)

A crankshaft position sensing apparatus for use with an engine (16) having a combined starter/alternator assembly (18). The crankshaft position sensing apparatus includes a tone ring (38) with a sensor (36) and bandpass filter (46), having a cylinder identification input from a camshaft sensor (48), and a gain limiter (54). The sensing apparatus mounts near the rotor (30) of the combined starter/alternator assembly (18). The filtered crankshaft position signal can then be input into a vehicle system controller (58) and an inner loop controller (60). The starter/alternator assembly (18) in combination with an internal combustion engine is particularly useful for a hybrid electric vehicle system.

Brandenburg, Larry Raymond (Plymouth, MI); Miller, John Michael (Saline, MI)

2000-06-13T23:59:59.000Z

318

Catalytic combustor for integrated gasification combined cycle power plant  

DOE Patents (OSTI)

A gasification power plant 10 includes a compressor 32 producing a compressed air flow 36, an air separation unit 22 producing a nitrogen flow 44, a gasifier 14 producing a primary fuel flow 28 and a secondary fuel source 60 providing a secondary fuel flow 62 The plant also includes a catalytic combustor 12 combining the nitrogen flow and a combustor portion 38 of the compressed air flow to form a diluted air flow 39 and combining at least one of the primary fuel flow and secondary fuel flow and a mixer portion 78 of the diluted air flow to produce a combustible mixture 80. A catalytic element 64 of the combustor 12 separately receives the combustible mixture and a backside cooling portion 84 of the diluted air flow and allows the mixture and the heated flow to produce a hot combustion gas 46 provided to a turbine 48. When fueled with the secondary fuel flow, nitrogen is not combined with the combustor portion.

Bachovchin, Dennis M. (Mauldin, SC); Lippert, Thomas E. (Murrysville, PA)

2008-12-16T23:59:59.000Z

319

ProForm | Open Energy Information  

Open Energy Info (EERE)

ProForm ProForm Jump to: navigation, search Tool Summary Name: ProForm Agency/Company /Organization: Lawrence Berkeley National Laboratory Sector: Climate, Energy Focus Area: - Landfill Gas, Energy Efficiency, Solar, Wind Topics: Co-benefits assessment, - Environmental and Biodiversity, Finance Resource Type: Software/modeling tools User Interface: Spreadsheet Complexity/Ease of Use: Moderate Website: poet.lbl.gov/Proform/ Cost: Paid References: ProForm[1] Related Tools ICCT Roadmap Model General Equilibrium Modeling Package (GEMPACK) Modeling International Relationships in Applied General Equilibrium (MIRAGE) ... further results Find Another Tool FIND DEVELOPMENT IMPACTS ASSESSMENT TOOLS Logo: ProForm ProForm is a software tool designed to support a basic assessment of the

320

Paperclips Supply Store Forms | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Paperclips Supply Store Forms Paperclips Supply Store Forms Paperclips Supply Store Forms Catalog Order Form for Non-Stocked or Specialty Items For any non-stocked or special item that needs to be ordered, the Catalog Order Form (pdf) needs to be filled in. All supplies ordered MUST be used for Official Government Business. All catalog orders are subject to full payment or a restocking fee if items ordered are returned to the supplier due to the customer not picking up the item(s) within five days of receipt by the store personnel or the customer deciding to return the item(s). This form is fillable and also saveable with the Acrobat Reader or through your web browser. Request Supply Store Purchasing Authority for a Non-Federal Employee In order for non-federal headquarters personnel to gain access to make

Note: This page contains sample records for the topic "form eia-920 combined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Combine Hills Wind Farm | Open Energy Information  

Open Energy Info (EERE)

Combine Hills Wind Farm Combine Hills Wind Farm Jump to: navigation, search Name Combine Hills Wind Farm Facility Combine Hills Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner Babcock & Brown/Eurus Developer Eurus Energy Purchaser PacifiCorp Location Near Umapine OR Coordinates 45.94152°, -118.589137° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":45.94152,"lon":-118.589137,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

322

Axisymmetric Inlet Design for Combined Cycle Engines.  

E-Print Network (OSTI)

??Performance considerations for a turbine-based combined-cycle engine inlet are presented using the inlet of the Lockheed SR-71 as a baseline. A numerical model is developed… (more)

Colville, Jesse

2005-01-01T23:59:59.000Z

323

Combining sustainability criteria with discrete event simulation  

Science Conference Proceedings (OSTI)

This paper attempts to highlight shortcomings in the concept of sustainability and ways to make the concept more workable by presenting the development of an Environmental Management Information System (EMIS) as a combination of discrete event simulation ...

Andi H. Widok; Volker Wohlgemuth; Bernd Page

2011-12-01T23:59:59.000Z

324

Quick Plastic Forming of Aluminum Sheet Metal  

NLE Websites -- All DOE Office Websites (Extended Search)

General Motors' President North America, Gary Cowger, General Motors' President North America, Gary Cowger, reviews the 2004 Chevy Malibu Maxx after introducing it to the media at the New York Auto Show. (photo courtesy of General Motors) Quick Plastic Forming of Aluminum Sheet Metal Background Aluminum automotive components made using a hot blow forming process are reducing vehicle weight and increasing the fuel efficiency of today's cars. However, before General Motors (GM) and the U.S. Department of Energy (DOE) sponsored research in this technol- ogy, blow forming of aluminum was not a viable process for automakers. The prior blow forming process,

325

Security Forms | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Management & Safeguards System Security Forms Federal Information Processing Standards Publications (FIPS PUBS) FIPS-Associated Documents FIPS 140-2 Security Requirements...

326

Fermilab | Take Five for Goal Zero | Forms  

NLE Websites -- All DOE Office Websites (Extended Search)

Forms Work Planning Work Permit & Notification Hazard Analysis Electrical Hazard Analysis Pressure Testing Permit General LOTO Procedure Excavation Permit NEPA Project Information...

327

Configuration Change Proposal Form | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

and Office Management Areas. Green-DNS-Form09.doc More Documents & Publications Cyber Security Procurement Language for Control Systems Version 1.8 OPC Security Whitepaper...

328

Spray Forming: Alloys, Products, and Markets  

Science Conference Proceedings (OSTI)

Due to the single-step processing cycle, spray-formed aluminum alloys can be produced at substantially lower costs than P/M products, approaching cost levels  ...

329

SPRAY FORMING--EXPERIMENT, ANALYSIS, AND ...  

Science Conference Proceedings (OSTI)

In addition, details of the requirements for large-scale production of spray-formed alloys and process developments to reduce costs and improve product ...

330

Assessment of Preferred Depleted Uranium Disposal Forms  

NLE Websites -- All DOE Office Websites (Extended Search)

. . 7 3.2 PRELIMINARY ASSESSMENT OF DU DISPOSAL AT OTHER SITES . . . . . . . . . . 8 3.3 COSTS OF PRODUCTION, TRANSPORTATION, AND DISPOSAL OF DU WASTE FORMS . . . . . . . . . . ....

331

Request for Training Exemption/Waiver Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Modified for use by Photon Sciences Effective 06282013 Photon Sciences Request for Training Reciprocity Form For General Employee Radiological Training (GERT) Individuals may be...

332

Questions and Answers - How do atoms form?  

NLE Websites -- All DOE Office Websites (Extended Search)

(Biggest and smallest atom?) Questions and Answers Main Index Next Question (Does gravity affect atoms?) Does gravity affect atoms? How do atoms form? The current view is that...

333

Sample Forms | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Sample Forms Home > About Us > Our Programs > Nuclear Security > Nuclear Materials Management &...

334

Security Forms | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Security Forms Home > About Us > Our Programs > Nuclear Security > Nuclear Materials...

335

SPRAY FORMING--EXPERIMENT, ANALYSIS, AND ... - TMS  

Science Conference Proceedings (OSTI)

... Jt. EPD/MDMD Synthesis Control & Analysis in Materials Processing .... IN THE SPRAY-FORMED ALUMINUM ALLOY PREFORMS: Ram B. Bhagat, Maurice ...

336

Ocean Feedback Form | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Feedback Form Ocean Data Tools Technical Guide Map Gallery Regional Planning Feedback Ocean You are here Data.gov Communities Ocean Comments or Suggestions Name * Email Topic...

337

2000 TMS Annual Meeting Housing Form  

Science Conference Proceedings (OSTI)

Feb 18, 2000 ... PLEASE COMPLETE THE FORM BELOW AND RETURN TO: Opryland Hotel & Convention Center. Attn: Reservations Manager (c-mmm).

338

For Researchers: Forms and Policies - Lawrence Berkeley ...  

Policy: Conflict of Interest in Licensing. Form: Conflict of Interest TT 100-LBNL (.doc) ... U.S. DEPARTMENT OF ENERGY • OFFICE OF SCIENCE • UNIVERSITY OF CALIFORNIA.

339

SPARQL Query Form | OpenEI  

Open Energy Info (EERE)

624878 Varnish cache server SPARQL Query Form Default Graph URI Query text select distinct ?Concept where a ?Concept LIMIT 100 Display Results As: Auto HTML Spreadsheet XML...

340

Fermilab at Work - Manuals and Forms  

NLE Websites -- All DOE Office Websites (Extended Search)

Fermilab at Work Home Home FAW Home Fermilab Now Directories and Maps Work Resources Policies and Forms Administration Lab Life Physics Links Experiments and Projects Divisions and...

Note: This page contains sample records for the topic "form eia-920 combined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

CRA Memorandum form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

form This memorandum summarizes salient inputs to the CRA locational price forecasting model (GE MAPS). The model geographic footprint encompasses the US portion of the...

342

Magnesium: Digital Resource Center - ARTICLE: Forming of ...  

Science Conference Proceedings (OSTI)

Sep 20, 2007 ... This paper addresses the formability of magnesium extrusions with respect to rotary-draw bending and hydro-mechanical forming, presenting ...

343

Sample Forms | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Sample Forms | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our...

344

Form W-8BEN (Rev. February 2006)  

NLE Websites -- All DOE Office Websites (Extended Search)

Form W-8BEN (Rev. February 2006) Department of the Treasury Internal Revenue Service Certificate of Foreign Status of Beneficial Owner for United States Tax Withholding See...

345

Julian Szekely Memorial Symposium Registration Form  

Science Conference Proceedings (OSTI)

... housing reservations by downloading and mailing or faxing the Housing Reservation Form, which is an Adobe Acrobat portable document format (.pdf) file .

346

Alumina-forming Austenitic Alloys Licensed | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

for alumina scales to form on the exterior of the steel, which provides significant oxidation resistance. In addition, the alloy displays excellent creep strength at high...

347

Frequently Asked Questions Form EIA-857  

U.S. Energy Information Administration (EIA) Indexed Site

Natural Gas Survey Forms FAQ Natural Gas Survey Forms FAQ EIA-857, "Monthly Report of Natural Gas Purchases and Deliveries to Consumers" You may always call Amy Sweeney for assistance at (202) 586-2627 or e-mail us at OOG.SURVEYS@eia.gov. Q1. How do I get a copy of the form and/or the instructions? Q2. What version of the form should I use? Q3. How do I submit the form? Q4. When is the form due? Q5. My company does not have the information required on the Form EIA-857 within 30 days after the end of the report month. Can we get an extension? Q6. Who should I inform of a change in the contact person in our company for Form EIA-857? Q7. Who should I inform if our company is sold, merged with another company, or buys another natural gas company? Q8. Why does my company always get selected to file Form EIA-857?

348

Nucleon Form Factor Measurements and Interpretation  

SciTech Connect

The data base for the form factors of the nucleon obtained from elastic ep scattering is discussed, as well as some recent developments in their calculation.

Charles F. Perdrisat

2007-08-22T23:59:59.000Z

349

Employee Assistance Self-ID Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Request for Assistance During an Emergency Employee Self Identification This form is to be used by persons who expect that they will need assistance during an emergency. The...

350

Combined Cycle Performance Monitoring and Recovery Guideline  

Science Conference Proceedings (OSTI)

The benefits of improved combined cycle power plant performance continue to grow as the cost of fuel rises and international concerns over global warming increase.This guideline provides a framework for performance monitoring, assessment, recovery and optimization of combined cycle power plants. The guideline distills existing experience and documents on heat rate recovery and capacity improvement into a comprehensive manual for plant implementation and training applications. The purpose ...

2012-12-31T23:59:59.000Z

351

Polymer compositions, polymer films and methods and precursors for forming same  

SciTech Connect

Stable, high performance polymer compositions including polybenzimidazole (PBI) and a melamine-formaldehyde polymer, such as methylated, poly(melamine-co-formaldehyde), for forming structures such as films, fibers and bulky structures. The polymer compositions may be formed by combining polybenzimidazole with the melamine-formaldehyde polymer to form a precursor. The polybenzimidazole may be reacted and/or intertwined with the melamine-formaldehyde polymer to form the polymer composition. For example, a stable, free-standing film having a thickness of, for example, between about 5 .mu.m and about 30 .mu.m may be formed from the polymer composition. Such films may be used as gas separation membranes and may be submerged into water for extended periods without crazing and cracking. The polymer composition may also be used as a coating on substrates, such as metal and ceramics, or may be used for spinning fibers. Precursors for forming such polymer compositions are also disclosed.

Klaehn, John R; Peterson, Eric S; Orme, Christopher J

2013-09-24T23:59:59.000Z

352

DOE Emergency Exercise Feedback Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE Emergency Exercise Feedback Form DOE Emergency Exercise Feedback Form Emergency Exercise Feedback Form DOE Emergency Exercise Feedback Form More Documents & Publications...

353

Jet acollinearity and quark form factors  

Science Conference Proceedings (OSTI)

Perturbative Quantum Chromodynamic corrections involving the emission of gluons which are both soft and collinear are discussed for both hadronic production of lepton pairs and e/sup +/e/sup -/ annihilation. The result is an exponential, double logarithmic quark form factor. The effect of sub-leading corrections and the possible experimental observation of the form factor are discussed.

Stirling, W.J.

1980-01-01T23:59:59.000Z

354

Metered Mail Form Domestic Mail Only  

E-Print Network (OSTI)

Metered Mail Form Domestic Mail Only For USPS Mail Only Charge to Department First Class Mail Media Meter Form. · All outgoing USPS Mail that needs postage should be kept separate from all other mail already be sealed prior to being metered. Failure to properly seal this type of mail could result

Palmeri, Thomas

355

This form is used to activate claim  

E-Print Network (OSTI)

. IMPORTANT: Claim reimbursements can only be paid from the TIAA-CREF Money Market Mutual Fund. You may need. 4. Fax your completed form to 800 914-8922, or mail the form to: TIAA-CREF P.O. Box 1259 Charlotte

356

Form W-8BEN (Rev. February 2006)  

NLE Websites -- All DOE Office Websites (Extended Search)

Form Form W-8BEN (Rev. February 2006) Department of the Treasury Internal Revenue Service Certificate of Foreign Status of Beneficial Owner for United States Tax Withholding ᮣ See separate instructions. ᮣ Give this form to the withholding agent or payer. Do not send to the IRS. OMB No. 1545-1621 Do not use this form for: Instead, use Form: ● A foreign partnership, a foreign simple trust, or a foreign grantor trust (see instructions for exceptions) W-8ECI or W-8IMY ● A foreign government, international organization, foreign central bank of issue, foreign tax-exempt organization, foreign private foundation, or government of a U.S. possession that received effectively connected income or that is claiming the applicability of section(s) 115(2), 501(c), 892, 895, or 1443(b) (see instructions)

357

On Line Beamline Commissioning Activity Approval Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Commissioning Activity Approval Form Commissioning Activity Approval Form This form is to be filled by the Commissioning Activity Team Leader. No beamline commissioning activities will be allowed to run without a properly completed, approved, and posting of this commissioning approval form. You will be notified by e-mail upon approval. Sector Beamline Expected Start Date Expected Duration 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 BM ID ( Give a Unit) Activity Description( Give only a brief description) Commissioning Team Members First and Last Name Affiliation Phone Number 1. 2. 3. 4. 5. 6. Special Safety Concerns Commissioning Activity Team Leader Name E-Mail Address Submit Commissioning Activity Approval Form Clear all Fields and start All over again!!!

358

Miscellaneous Forms | Y-12 National Security Complex  

NLE Websites -- All DOE Office Websites (Extended Search)

Miscellaneous Forms Miscellaneous Forms Miscellaneous Forms The following miscellaneous forms are provided in PDF fillable and/or Word format. Click the link in the "Format" column to open a copy of the form or right-click to download. Number* Title/Description Format** SF-85 Questionnaire for Non-Sensitive Positions PDF-fil UCN-13A Relocation Expense Report PDF-fil, PDF print UCN-15436 Gifts and Grants Request PDF-fil, Word UCN-16708 Request for Authorization to Ship SNM or Non-SNM Material (U) Word UCN-16790A Approval of Product Returned for Accountable Material and Non-Accountable Weapons Material (U) PDF print UCN-20650 Statement of Interest in Maintaining Section 3161 Employment Eligibility PDF-fil UCN-20904 Supplier Qualification Questionnaire Word

359

Qualifying radioactive waste forms for geologic disposal  

SciTech Connect

We have developed a phased strategy that defines specific program-management activities and critical documentation for producing radioactive waste forms, from pyrochemical processing of spent nuclear fuel, that will be acceptable for geologic disposal by the US Department of Energy. The documentation of these waste forms begins with the decision to develop the pyroprocessing technology for spent fuel conditioning and ends with production of the last waste form for disposal. The need for this strategy is underscored by the fact that existing written guidance for establishing the acceptability for disposal of radioactive waste is largely limited to borosilicate glass forms generated from the treatment of aqueous reprocessing wastes. The existing guidance documents do not provide specific requirements and criteria for nonstandard waste forms such as those generated from pyrochemical processing operations.

Jardine, L.J. [Lawrence Livermore National Lab., CA (United States); Laidler, J.J.; McPheeters, C.C. [Argonne National Lab., IL (United States)

1994-09-01T23:59:59.000Z

360

Viscosity-based high temperature waste form compositions  

SciTech Connect

High-temperature waste forms such as iron-enriched basalt are proposed to immobilize and stabilize a variety of low-level wastes stored at the Idaho National Engineering Laboratory. The combination of waste and soil anticipated for the waste form results in high SiO{sub 2} + Al{sub 2}O{sub 3} producing a viscous melt in an arc furnace. Adding a flux such as CaO to adjust the basicity ratio (the molar ratio of basic to acid oxides) enables tapping the furnace without resorting to extreme temperatures, but adds to the waste volume. Improved characterization of wastes will permit adjusting the basicity ratio to between 0.7 and 1.0 by blending of wastes and/or changing the waste-soil ratio. This minimizes waste form volume. Also, lower pouring temperatures will decrease electrode and refractory attrition, reduce vaporization from the melt, and, with suitable flux, facilitate crystallization. Results of laboratory tests were favorable and pilot-scale melts are planned; however, samples have not yet been subjected to leach testing.

Reimann, G.A.

1994-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "form eia-920 combined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

The importance of combined cycle generating plants in integrating large levels of wind power generation  

Science Conference Proceedings (OSTI)

Integration of high wind penetration levels will require fast-ramping combined cycle and steam cycles that, due to higher operating costs, will require proper pricing of ancillary services or other forms of compensation to remain viable. Several technical and policy recommendations are presented to help realign the generation mix to properly integrate the wind. (author)

Puga, J. Nicolas

2010-08-15T23:59:59.000Z

362

Methods of forming semiconductor devices and devices formed using such methods  

SciTech Connect

Single source precursors are subjected to carbon dioxide to form particles of material. The carbon dioxide may be in a supercritical state. Single source precursors also may be subjected to supercritical fluids other than supercritical carbon dioxide to form particles of material. The methods may be used to form nanoparticles. In some embodiments, the methods are used to form chalcopyrite materials. Devices such as, for example, semiconductor devices may be fabricated that include such particles. Methods of forming semiconductor devices include subjecting single source precursors to carbon dioxide to form particles of semiconductor material, and establishing electrical contact between the particles and an electrode.

Fox, Robert V; Rodriguez, Rene G; Pak, Joshua

2013-05-21T23:59:59.000Z

363

Combine Hills II | Open Energy Information  

Open Energy Info (EERE)

Combine Hills II Combine Hills II Facility Combine Hills II Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner Eurus Developer Eurus Energy Purchaser Clark County PUD Location Near Milton-Freewater OR Coordinates 45.946742°, -118.56828° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":45.946742,"lon":-118.56828,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

364

$sup 238$Pu fuel form activities  

SciTech Connect

This report for STYPu Fuel Form Activities has one main section: SRP-PuFF Facility. The SRL portion of this program has been completed. The program status, budget information, and milestone schedules are discussed. The SRP portion of this report summarizes production of STYPuO2 fuel forms for use in radioisotopic thermoelectric generators (RTG's) in the Plutonium Fuel Form (Puff) Facility at the Savannah River Plant. The PuFF Facility has been placed in a production readiness mode of operation pending funding of additional heat source programs.

1987-06-01T23:59:59.000Z

365

Plasma formed ion beam projection lithography system  

DOE Patents (OSTI)

A plasma-formed ion-beam projection lithography (IPL) system eliminates the acceleration stage between the ion source and stencil mask of a conventional IPL system. Instead a much thicker mask is used as a beam forming or extraction electrode, positioned next to the plasma in the ion source. Thus the entire beam forming electrode or mask is illuminated uniformly with the source plasma. The extracted beam passes through an acceleration and reduction stage onto the resist coated wafer. Low energy ions, about 30 eV, pass through the mask, minimizing heating, scattering, and sputtering.

Leung, Ka-Ngo (Hercules, CA); Lee, Yung-Hee Yvette (Berkeley, CA); Ngo, Vinh (San Jose, CA); Zahir, Nastaran (Greenbrae, CA)

2002-01-01T23:59:59.000Z

366

2011 Form EIA-63B Instructions  

U.S. Energy Information Administration (EIA) Indexed Site

U. S. DEPARTMENT OF ENERGY Form Approved U.S. ENERGY INFORMATION ADMINISTRATION OMB No. 1905-0196 Washington, DC 20585 Expires: 12/31/2013 FORM EIA-63B ANNUAL PHOTOVOLTAIC CELL/MODULE SHIPMENTS REPORT GENERAL INFORMATION AND INSTRUCTIONS I. Purpose Form EIA-63B is designed to provide the data necessary for the U.S. Energy Information Administration (EIA), a part of the U.S. Department of Energy (DOE), to carry out its responsibilities tracking photovoltaic cell/module shipments in the photovoltaic industry and

367

Eco-buzz: an interactive eco-feedback system based on cultural forms of play  

Science Conference Proceedings (OSTI)

I present the design of Eco-Buzz, an interactive system designed to engage families in informal learning activities in which they seek out hidden sources of energy consumption in their homes. The system combines an electro-magnetic field ... Keywords: children, cultural forms, energy vampires, families, learning, sustainable interaction design

Amartya Banerjee

2013-02-01T23:59:59.000Z

368

Dissecting the Pressure Field in Tidal Flow past a Headland: When Is Form Drag “Real”?  

Science Conference Proceedings (OSTI)

In the few previous measurements of topographic form drag in the ocean, drag that is much larger than a typical bluff body drag estimate has been consistently found. In this work, theory combined with a numerical model of tidal flow around a ...

Sally J. Warner; Parker MacCready

2009-11-01T23:59:59.000Z

369

CRYSTALLINE CERAMIC WASTE FORMS: COMPARISON OF REFERENCE PROCESS FOR CERAMIC WASTE FORM FABRICATION  

SciTech Connect

The research conducted in this work package is aimed at taking advantage of the long term thermodynamic stability of crystalline ceramics to create more durable waste forms (as compared to high level waste glass) in order to reduce the reliance on engineered and natural barrier systems. Durable ceramic waste forms that incorporate a wide range of radionuclides have the potential to broaden the available disposal options and to lower the storage and disposal costs associated with advanced fuel cycles. Assemblages of several titanate phases have been successfully demonstrated to incorporate radioactive waste elements, and the multiphase nature of these materials allows them to accommodate variation in the waste composition. Recent work has shown that they can be produced from a melting and crystallization process. The objective of this report is to explore the phase formation and microstructural differences between lab scale melt processing in varying gas environments with alternative densification processes such as Hot Pressing (HP) and Spark Plasma Sintering (SPS). The waste stream used as the basis for the development and testing is a simulant derived from a combination of the projected Cs/Sr separated stream, the Trivalent Actinide - Lanthanide Separation by Phosphorous reagent Extraction from Aqueous Komplexes (TALSPEAK) waste stream consisting of lanthanide fission products, the transition metal fission product waste stream resulting from the transuranic extraction (TRUEX) process, and a high molybdenum concentration with relatively low noble metal concentrations. Melt processing as well as solid state sintering routes SPS and HP demonstrated the formation of the targeted phases; however differences in microstructure and elemental partitioning were observed. In SPS and HP samples, hollandite, pervoskite/pyrochlore, zirconolite, metallic alloy and TiO{sub 2} and Al{sub 2}O{sub 3} were observed distributed in a network of fine grains with small residual pores. The titanate phases that incorporate M{sup +3} rare earth elements were observed to be distinct phases (ex. Nd{sub 2}Ti{sub 2}O{sub 7}) with less degree of substitution as compared to the more homogeneous melt processed samples where a high degree of substitution and variation of composition within grains was observed. Liquid phase sintering was enhanced in reducing gas environments and resulted in large (10-200 microns) irregular shaped grains along with large voids associated with the melt process; SPS and HP samples exhibited finer grain size with smaller voids. Metallic alloys were observed in the bulk of the sample for SPS and HP samples, but were found at the bottom of the crucible in melt processed trials. These results indicate that for a first melter trial, the targeted phases can be formed in air by utilizing Ti/TiO{sub 2} additives which aid phase formation and improve the electrical conductivity. Ultimately, a melter run in reducing gas environments would be beneficial to study differences in phase formation and elemental partitioning.

Brinkman, K. S. [Savannah River National Laboratory; Marra, J. C. [Savannah River National Laboratory; Amoroso, J. [Savannah River National Laboratory; Tang, M. [Los Alamos National Laboratory

2013-08-22T23:59:59.000Z

370

The NERSC Allocation Request Form (ERCAP)  

NLE Websites -- All DOE Office Websites (Extended Search)

NIM (NERSC Information Management portal) NIM (NERSC Information Management portal) Awarded projects Policies Data Analytics & Visualization Data Management Policies Science Gateways User Surveys NERSC Users Group User Announcements Help Operations for: Passwords & Off-Hours Status 1-800-66-NERSC, option 1 or 510-486-6821 Account Support https://nim.nersc.gov accounts@nersc.gov 1-800-66-NERSC, option 2 or 510-486-8612 Consulting http://help.nersc.gov consult@nersc.gov 1-800-66-NERSC, option 3 or 510-486-8611 How to Submit a 2014 ERCAP Request Home » For Users » Accounts & Allocations » Allocations » Allocation Request Form (ERCAP) Show All | 1 2 3 4 5 ... 16 | Next » The NERSC Allocation Request Form (ERCAP) Requests to use NERSC resources are submitted annually via a web form known as the ERCAP (Energy Research Computing Allocations Process) Request Form.

371

Benefits Forms and Information | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

New Employee Orientation » Benefits Forms and New Employee Orientation » Benefits Forms and Information Benefits Forms and Information As a Federal employee, you may have the opportunity to participate in a number of employee benefit and family-friendly programs. If your appointment to Federal employment confers eligibility, you may elect to participate in health, dental, and life insurance programs; retirement savings plans; flexible spending accounts; long-term care insurance; and vacation and sick leave. In addition, there are a number of family-friendly programs that the Department of Energy (DOE) offers its employees, such as alternative work schedules, flexiplace/telecommuting, transit subsidy, child development centers, and exercise and wellness facilities. The employment forms found in this section collect important and necessary

372

EOTA - Business Form Document Title: Nonconformance Report  

NLE Websites -- All DOE Office Websites (Extended Search)

5 Nonconformance Report 07_1206.doc 07_1206 Page 1 of 3 5 Nonconformance Report 07_1206.doc 07_1206 Page 1 of 3 EOTA - Business Form Document Title: Nonconformance Report Document Number: F-015 Rev. 07_12-06 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: P-011, Nonconforming Material / Product Process Notify of Changes: EOTA Employees Referenced Document(s): N/A F-015 Nonconformance Report 07_1206.doc 07_1206 Page 2 of 3 Revision History: Rev. Description of Change A Initial Release 07_1206 Converted form F-015 to a Word Form. Changed layout of form. No content changes were done. C D E F-015 Nonconformance Report 07_1206.doc 07_1206 Page 1 of 1 Nonconformance Report (NCR) General Information NCR # -

373

Design Code Survey Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Design Code Survey Form Design Code Survey Form Design Code Survey Form Survey of Safety Software Used in Design of Structures, Systems, and Components 1. Introduction The Department's Implementation Plan for Software Quality Assurance (SQA) that was developed in response to Defense Nuclear Facilities Safety Board Recommendation 2002-01, Quality Assurance for Safety-Related Software, includes a commitment (4.2.1.5) to conduct a survey of design codes currently in use to determine if any should be included as part of the toolbox codes. Design Code Survey Form September 11, 2003 More Documents & Publications Technical Standards, Safety Analysis Toolbox Codes - November 2003 DOE G 414.1-4, Safety Software Guide for Use with 10 CFR 830 Subpart A, Quality Assurance Requirements, and DOE O 414.1C, Quality Assurance

374

Form:Reference | Open Energy Information  

Open Energy Info (EERE)

Form Form Edit History Facebook icon Twitter icon » Form:Reference Jump to: navigation, search Input the title of a Reference below. If the reference already exists, you will be able to edit its information. Add/Edit Reference The text entered into this field will be used as the name of the reference; for example, the title of a book or name of the journal article. Example references Claritas Rise, Mars- Pre-Tharsis Magmatism? An Improved Equilibrium-Kinetics Speciation Algorithm For Redox Reactions In Variably Saturated Subsurface Flow Systems True-Temperature Determination Of Geothermal Reservoirs ... further results This form and reference requirements are based on the Council of Science Editors (CSE) (author-date) citation style. For more details about this

375

Form Approval: OMB No. 1905-0129  

U.S. Energy Information Administration (EIA) Indexed Site

Due Date: 2013 Due Date: 2013 Form Approval: OMB No. 1905-0129 Approval Expires: 12/31/2015 Burden hours: 0.75 SCHEDULE 1. IDENTIFICATION Contact Information Form EIA-861S ANNUAL ELECTRIC POWER INDUSTRY REPORT (Short Form) NOTICE: This report is mandatory under the Federal Energy Administration Act of 1974 (Public Law 93-275). Failure to comply may result in criminal fines, civil penalties and other sanctions as provided by law. For further information concerning sanctions and data protections see the provisions on sanctions and the provisions concerning the confidentiality of information in the instructions. Title 18 U.S.C. 1001 makes it a criminal offense for any person knowingly and willingly to make to any Agency or Department of the United States any false, fictitious, or fraudulent statements as to any matter within its jurisdiction. Entities that report using the Form EIA-861 do

376

Iterated Differential Forms II: Riemannian Geometry Revisited  

E-Print Network (OSTI)

A natural extension of Riemannian geometry to a much wider context is presented on the basis of the iterated differential form formalism developed in math.DG/0605113 and an application to general relativity is given.

A. M. Vinogradov; L. Vitagliano

2006-09-11T23:59:59.000Z

377

CIMS Course Application Form September 2013  

E-Print Network (OSTI)

CIMS Course Application Form 9th -13th September 2013 Name University/Company Address Address complete and return to Natalie Berge at: cims@surrey.ac.uk For applicants interested only in Part II

Doran, Simon J.

378

Front contact solar cell with formed emitter  

SciTech Connect

A bipolar solar cell includes a backside junction formed by an N-type silicon substrate and a P-type polysilicon emitter formed on the backside of the solar cell. An antireflection layer may be formed on a textured front surface of the silicon substrate. A negative polarity metal contact on the front side of the solar cell makes an electrical connection to the substrate, while a positive polarity metal contact on the backside of the solar cell makes an electrical connection to the polysilicon emitter. An external electrical circuit may be connected to the negative and positive metal contacts to be powered by the solar cell. The positive polarity metal contact may form an infrared reflecting layer with an underlying dielectric layer for increased solar radiation collection.

Cousins, Peter John (Menlo Park, CA)

2012-07-17T23:59:59.000Z

379

Assessment of Preferred Depleted Uranium Disposal Forms  

SciTech Connect

The Department of Energy (DOE) is in the process of converting about 700,000 metric tons (MT) of depleted uranium hexafluoride (DUF6) containing 475,000 MT of depleted uranium (DU) to a stable form more suitable for long-term storage or disposal. Potential conversion forms include the tetrafluoride (DUF4), oxide (DUO2 or DU3O8), or metal. If worthwhile beneficial uses cannot be found for the DU product form, it will be sent to an appropriate site for disposal. The DU products are considered to be low-level waste (LLW) under both DOE orders and Nuclear Regulatory Commission (NRC) regulations. The objective of this study was to assess the acceptability of the potential DU conversion products at potential LLW disposal sites to provide a basis for DOE decisions on the preferred DU product form and a path forward that will ensure reliable and efficient disposal.

Croff, A.G.; Hightower, J.R.; Lee, D.W.; Michaels, G.E.; Ranek, N.L.; Trabalka, J.R.

2000-06-01T23:59:59.000Z

380

Rearrangement Phylogeny of Genomes in Contig Form  

Science Conference Proceedings (OSTI)

There has been a trend in increasing phylogenetic coverage for genome sequencing while decreasing the sequencing coverage for each genome. With lower coverage, there is an increasing number of genomes being published in contig form. Rearrangement algorithms, ...

Adriana Muñoz; David Sankoff

2009-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "form eia-920 combined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

TMS Fall Meeting '99 Registration Form  

Science Conference Proceedings (OSTI)

Nov 4, 1999 ... Focusing on physical metallurgy and materials, the 1999 TMS Fall Meeting will ... Print out this form, complete it, and fax or mail it to the TMS ...

382

Form:Policy Organization | Open Energy Information  

Open Energy Info (EERE)

Add a Policy Organization Input your policy organization name below to add to the registry. If your policy organization is already in the registry, the form will be populated with...

383

FFSE/ISTA Online Membership Form  

NLE Websites -- All DOE Office Websites (Extended Search)

the tab key to go between text boxes; the keystrokes,"Return" and "Enter," have been disabled to avoid submitting the form prematurely. If you have questions about the membership...

384

Microsoft Word - Reservation Form.doc  

Science Conference Proceedings (OSTI)

RESERVATION FORM / ????? ???????????? Date: April 02-06, 2013 / ????: 02-06 ?????? 2013 ?. Special Guest Room Rate for AOCS group / ??????????? ???? ??? ?????? (Group code G-PO58) King room, 230 Euro, including VAT (20%), inc

385

Perfect Implementation of Normal-Form Mechanisms  

E-Print Network (OSTI)

Privacy and trust affect our strategic thinking, yet they have not been precisely modeled in mechanism design. In settings of incomplete information, traditional implementations of a normal-form mechanism ---by disregarding ...

Izmalkov, Sergei

386

DRAFT STAFF REPORT FORMS AND INSTRUCTIONS FOR  

E-Print Network (OSTI)

plans showing how demand for energy and annual peak load will be met by specific supply)............................................................. 20 Supply Form S-2: Energy Balance Table RESOURCE PLANS Prepared in Support of the 2013 Integrated Energy Policy Report

387

Exergy analysis of incremental sheet forming  

E-Print Network (OSTI)

Research in the last 15 years has led to die-less incremental forming processes that are close to realization in an industrial setup. Whereas many studies have been carried out with the intention of investigating technical ...

Dittrich, M. A.

388

Precipitation in Spray-Formed IN 718  

Science Conference Proceedings (OSTI)

Treatment of the spray formed alloy at 1025 and 1010°C led to no 6 phase in the microstructure .... partial funding of this work. References. 1. E.E. Brown and ...

389

Photochromic sculpture: volumetric color-forming pixels  

Science Conference Proceedings (OSTI)

In contrast to light-emitting displays like plasma display panels (PDPs) and liquid crystal displays (LCDs), color-forming displays like "E-Ink" which displays information by reflecting surrounding light are being actively researched as a technology ...

Tomoko Hashida; Yasuaki Kakehi; Takeshi Naemura

2011-08-01T23:59:59.000Z

390

A Note on the Jordan Canonical Form  

E-Print Network (OSTI)

A proof of the Jordan canonical form, suitable for a first course in linear algebra, is given. The proof includes the uniqueness of the number and sizes of the Jordan blocks.

Azad, H

2010-01-01T23:59:59.000Z

391

DUF6 Final EIS Document Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

EIS Request Form EIS Request Form Final EIS Document Request Form Use the form below to order copies of the DUF6 Conversion Facility Final EISs and Records of Decision. Step 3 Select the EIS that you want to receive. Select one of the three options below. My request applies to the Paducah Conversion Facility EIS My request applies to the Portsmouth Conversion Facility EIS My request applies to both the Paducah and the Portsmouth Conversion Facility EISs Step 1 Request EIS copies. Choose one or more of the following: Mail me a compact disc (CD-ROM) of the Final EIS and Record of Decision. Mail me a printed copy of the Final EIS and Record of Decision. Step 2 Enter your personal information. You must submit your full name and complete address including zip code to receive postal mail. You must provide an email address if you want to receive email notifications.

392

Electronic Forms & Pen Computers Improve Building Commissioning  

NLE Websites -- All DOE Office Websites (Extended Search)

Electronic Forms & Pen Computers Improve Building Commissioning Speaker(s): Rich Sydlowski Date: August 8, 2001 - 12:00pm Location: Bldg. 90 Seminar HostPoint of Contact:...

393

Directory of Energy Data Collection Forms: Forms in use as of October 1996  

SciTech Connect

This is the twentieth edition of the Directory of Energy Collection Data Forms, an authoritative listing of selected public use forms currently used as basic energy information gathering tools by the Department of Energy.

NONE

1996-12-01T23:59:59.000Z

394

SEPARATIONS AND WASTE FORMS CAMPAIGN IMPLEMENTATION PLAN  

SciTech Connect

This Separations and Waste Forms Campaign Implementation Plan provides summary level detail describing how the Campaign will achieve the objectives set-forth by the Fuel Cycle Reasearch and Development (FCRD) Program. This implementation plan will be maintained as a living document and will be updated as needed in response to changes or progress in separations and waste forms research and the FCRD Program priorities.

Vienna, John D.; Todd, Terry A.; Peterson, Mary E.

2012-11-26T23:59:59.000Z

395

Method of forming a chemical composition  

DOE Patents (OSTI)

A method of forming a chemical composition such as a chemical hydride is described and which includes the steps of selecting a composition having chemical bonds and which is capable of forming a chemical hydride; providing a source of hydrogen; and exposing the selected composition to an amount of ionizing radiation to encourage the changing of the chemical bonds of the selected composition, and chemically reacting the selected composition with the source of hydrogen to facilitate the formation of a chemical hydride.

Bingham, Dennis N. (Idaho Falls, ID); Wilding, Bruce M. (Idaho Falls, ID); Klingler, Kerry M. (Idaho Falls, ID); Zollinger, William T. (Idaho Falls, ID); Wendt, Kraig M. (Idaho Falls, ID)

2007-10-09T23:59:59.000Z

396

BERA Forms, Brookhaven Employees Recreation Association (BERA)  

NLE Websites -- All DOE Office Websites (Extended Search)

Forms Forms PDF Adobe Acrobat Reader is needed to view some files on this page. Get Reader | troubleshoot Request to serve Alcohol on-Site Form and Alcohol Policy (pdf) Guidelines to start a new BERA Club/Activity (pdf) Injury Report Form (pdf) Confirmation of Medical Insurance Receipt (pdf) BERA Club Activities - Insurance Information Weight Room or fitness activities: Any contractor or family member (this includes spouse/partner, adult children, guests/contractors) wishing to use the Weight Room MUST present a copy of their medical insurance card and initial a receipt that states they have insurance in place in order to participate in any fitness activities or the weight room. The Recreation Office (Bldg 400) will keep this receipt on file. BERA League Sports: BSA paid employees must fill out this BERA Sports Clearance Form* (pdf) and go through the clearance procedure with OMC @ 490 (not BERA Office). Once reviewed by OMC, the clearance form will be mailed to the player who must then furnish a copy to the captain in order to practice or play.

397

Process for forming transparent aerogel insulating arrays  

DOE Patents (OSTI)

An improved supercritical drying process for forming transparent silica aerogel arrays is described. The process is of the type utilizing the steps of hydrolyzing and condensing aloxides to form alcogels. A subsequent step removes the alcohol to form aerogels. The improvement includes the additional step, after alcogels are formed, of substituting a solvent, such as CO/sub 2/, for the alcohol in the alcogels, the solvent having a critical temperature less than the critical temperature of the alcohol. The resulting gels are dried at a supercritical temperature for the selected solvent, such as CO/sub 2/, to thereby provide a transparent aerogel array within a substantially reduced (days-to-hours) time period. The supercritical drying occurs at about 40/sup 0/C instead of at about 270/sup 0/C. The improved process provides increased yields of large scale, structurally sound arrays. The transparent aerogel array, formed in sheets or slabs, as made in accordance with the improved process, can replace the air gap within a double glazed window, for example, to provide a substantial reduction in heat transfer. The thus formed transparent aerogel arrays may also be utilized, for example, in windows of refrigerators and ovens, or in the walls and doors thereof or as the active material in detectors for analyzing high energy elementary particles or cosmic rays.

Tewari, P.H.; Hunt, A.J.

1985-09-04T23:59:59.000Z

398

Radionuclide Retention in Concrete Waste Forms  

Science Conference Proceedings (OSTI)

Assessing long-term performance of Category 3 waste cement grouts for radionuclide encasement requires knowledge of the radionuclide-cement interactions and mechanisms of retention (i.e., sorption or precipitation); the mechanism of contaminant release; the significance of contaminant release pathways; how waste form performance is affected by the full range of environmental conditions within the disposal facility; the process of waste form aging under conditions that are representative of processes occurring in response to changing environmental conditions within the disposal facility; the effect of waste form aging on chemical, physical, and radiological properties; and the associated impact on contaminant release. This knowledge will enable accurate prediction of radionuclide fate when the waste forms come in contact with groundwater. The information presented in the report provides data that 1) quantify radionuclide retention within concrete waste form materials similar to those used to encapsulate waste in the Low-Level Waste Burial Grounds (LLBG); 2) measure the effect of concrete waste form properties likely to influence radionuclide migration; and 3) quantify the stability of uranium-bearing solid phases of limited solubility in concrete.

Mattigod, Shas V.; Bovaird, Chase C.; Wellman, Dawn M.; Wood, Marcus I.

2010-09-30T23:59:59.000Z

399

Process for forming transparent aerogel insulating arrays  

DOE Patents (OSTI)

An improved supercritical drying process for forming transparent silica aerogel arrays is described. The process is of the type utilizing the steps of hydrolyzing and condensing aloxides to form alcogels. A subsequent step removes the alcohol to form aerogels. The improvement includes the additional step, after alcogels are formed, of substituting a solvent, such as CO.sub.2, for the alcohol in the alcogels, the solvent having a critical temperature less than the critical temperature of the alcohol. The resulting gels are dried at a supercritical temperature for the selected solvent, such as CO.sub.2, to thereby provide a transparent aerogel array within a substantially reduced (days-to-hours) time period. The supercritical drying occurs at about 40.degree. C. instead of at about 270.degree. C. The improved process provides increased yields of large scale, structurally sound arrays. The transparent aerogel array, formed in sheets or slabs, as made in accordance with the improved process, can replace the air gap within a double glazed window, for example, to provide a substantial reduction in heat transfer. The thus formed transparent aerogel arrays may also be utilized, for example, in windows of refrigerators and ovens, or in the walls and doors thereof or as the active material in detectors for analyzing high energy elementry particles or cosmic rays.

Tewari, Param H. (Milpitas, CA); Hunt, Arlon J. (Oakland, CA)

1986-01-01T23:59:59.000Z

400

Combined Heat & Power Technology Overview and Federal Sector Deployment  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Overview and Overview and Federal Sector Deployment Federal Utility Partnership Working Group Spring 2013 - May 22-23 San Francisco, CA Hosted by: Pacific Gas and Electric Company Bob Slattery Oak Ridge National Laboratory CHP is an integrated energy system that:  is located at or near a facility  generates electrical and/or mechanical power  recovers waste heat for ◦ heating ◦ cooling ◦ dehumidification  can utilize a variety of technologies and fuels  is also referred to as cogeneration The on-site simultaneous generation of two forms of energy (heat and electricity) from a single fuel/energy source Defining Combined Heat and Power (CHP) Steam Electricity Fuel Prime Mover & Generator Heat Recovery Steam Boiler Conventional CHP

Note: This page contains sample records for the topic "form eia-920 combined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Definition: Combined heat and power | Open Energy Information  

Open Energy Info (EERE)

heat and power heat and power Jump to: navigation, search Dictionary.png Combined heat and power The production of electricity and heat from a single process. Almost synonymous with the term cogeneration, but slightly more broad. Under the Public Utility Regulatory Policies Act (PURPA), the definition of cogeneration is the production of electric energy and "another form of useful thermal energy through the sequential use of energy." Since some facilities produce both heat and power but not in a sequential fashion, the term CHP is used.[1][2][3] View on Wikipedia Wikipedia Definition View on Reegle Reegle Definition Cogeneration power plants produce electricity but do not waste the heat this process creates. The heat is used for district heating or other purposes, and thus the overall efficiency is improved. For example could

402

Distributed control applied to combined electricity and natural gas infrastructures  

E-Print Network (OSTI)

Abstract — The optimization of combined electricity and natural gas systems is addressed in this paper. The two networks are connected via energy hubs. Using the energy hub concept, the interactions between the different infrastructures can be analyzed. A system consisting of several interconnected hubs forms a distributed power generation structure where each hub is controlled by its respective control agent. Recently, a distributed control method has been applied to such a system. The overall optimization problem including the entire system is decomposed into subproblems according to the control agents. In this paper, a parallel and serial version of that method is discussed. Simulation results are obtained through experiments on a three-hub benchmark system. I.

Michèle Arnold; Rudy R. Negenborn; Göran Andersson; Bart De Schutter

2008-01-01T23:59:59.000Z

403

Combinational domain encryption for still visual data  

Science Conference Proceedings (OSTI)

Image data has distinct regions of different importance. This property of image data has extensively been used to develop partial encryption techniques, but it is still unnoticed for total encryption. Providing similar security level to data of varied ... Keywords: Arnold cat map, Combinational domain, Edge detection, Net pixel change ratio, Statistical analysis

Nidhi Taneja; Balasubramanian Raman; Indra Gupta

2012-08-01T23:59:59.000Z

404

Combined cycle power plant incorporating coal gasification  

DOE Patents (OSTI)

A combined cycle power plant incorporating a coal gasifier as the energy source. The gases leaving the coal gasifier pass through a liquid couplant heat exchanger before being used to drive a gas turbine. The exhaust gases of the gas turbine are used to generate both high pressure and low pressure steam for driving a steam turbine, before being exhausted to the atmosphere.

Liljedahl, Gregory N. (Tariffville, CT); Moffat, Bruce K. (Simsbury, CT)

1981-01-01T23:59:59.000Z

405

Combined Heat and Power Plant Steam Turbine  

E-Print Network (OSTI)

waste heat) Gas Turbine University Substation High Pressure Natural Gas Campus Electric Load SouthernCombined Heat and Power Plant Steam Turbine Steam Turbine Chiller Campus Heat Load Steam (recovered Generator Heat Recovery Alternative Uses: 1. Campus heating load 2. Steam turbine chiller to campus cooling

Rose, Michael R.

406

On linear combinations of -terms Lionel Vaux  

E-Print Network (OSTI)

On linear combinations of -terms Lionel Vaux Institut de Math´ematiques de Luminy, CNRS UMR 6206, endowing the set of terms with a structure of R-module, where R is a fixed set of scalars. Terms with values in a vector space. We then extend -reduction on those algebraic -terms as follows: at + u reduces

Paris-Sud XI, Université de

407

Combining forecast weights: Why and how?  

Science Conference Proceedings (OSTI)

This paper proposes a procedure called forecast weight averaging which is a specific combination of forecast weights obtained from different methods of constructing forecast weights for the purpose of improving the accuracy of pseudo out of sample forecasting. It is found that under certain specified conditions

Yip Chee Yin; Ng Kok-Haur; Lim Hock-Eam

2012-01-01T23:59:59.000Z

408

Renewable Combined Heat and Power Dairy Operations  

E-Print Network (OSTI)

horsepower Guascor model SFGLD-560 biogas-fired lean burn internal combustion (IC) engine and generator set and modify the existing biogas toelectricity combined heat and power (CHP) system operated at Fiscalini bacteria to remove hydrogen sulfide presented in the biogas. Source: Fiscalini Farms Term: March 2011

409

Method of forming metallic coatings on polymeric substrates and of forming graded polymeric coatings or films  

DOE Patents (OSTI)

The invention described herein relates to methods of forming graded polymeric coatings or films on a desired substrate and of forming metallic coatings on polymeric or other nonmetallic substrates. In particular, it relates to methods of forming such coatings or films by sorption and/or diffusion of metals into coatings or films of polymeric material deposited by conventional techniques on a desired substrate.

Liepins, R.

1981-03-11T23:59:59.000Z

410

Directory of Energy Data Collection Forms: Forms in use as of October 1993  

Science Conference Proceedings (OSTI)

This is the seventeenth edition of the Directory of Energy Data Collection forms, an authoritative listing of selected public use forms currently used as basic energy information gathering tools by the Department of Energy (DOE). Originally entitled EIA Data Collection forms, this directory provides an overview of DOE`s energy information collection programs for decisionmakers in Government and industry.

Not Available

1993-12-28T23:59:59.000Z

411

U.S. Department of Energy Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Thermogravimetric Analysis and Mass Spectrometer in SRNL GB-49 Thermogravimetric Analysis and Mass Spectrometer in SRNL GB-49 Savannah River Site Aiken/Aiken/South Carolina A thermogravimetric analyzer (TGA) combined with a mass spectrometer (MS) are located in 773-A, C-154/158. The TGA unit is installed inside an active glovebox (GB-49) that serves as radiological containment and is vented to the 773-A OGE system. The MS unit is located under GB-49 and pulls a small sample of gas from the TGA off-gas for analysis of volatile species like water vapor, carbon dioxide, nitrogen oxides, etc., that are formed during thermal treatment or decomposition of TGA samples. The MS exhaust vents into GB-49. Standard powder materials used (in < 1 g aliquots) to verify instrument operation include gypsum (CaSO4 2H2O), calcium oxalate, sodium bicarbonate, sand, hydrated salts, etc.

412

Spray forming lead strip. Final report  

SciTech Connect

A cooperative research project was conducted between the Idaho National Engineering Laboratory (INEL) and Johnson Controls, Inc. (JCI) to adapt the INEL spray forming process to produce near-net-shape lead alloy strip. The emphasis of the work was to spray form lead strip samples at INEL, using a variety of spray conditions, for characterization at JCI. An existing glove box apparatus was modified at INEL to spray form lead. The main spray forming components were housed inside the glove box. They included a spray nozzle, tundish (crucible), substrate assembly, gas heater and furnaces to heat the nozzle and tundish. To spray form metal strip, liquid metal was pressure-fed at a controlled rate through a series of circular orifices that span the width of the nozzle. There the metal contacted high velocity, high temperature inert gas (nitrogen) which atomized the molten material into fine droplets, entrained the droplets in a directed flow, and deposited them onto glass plates that were swept through the spray plume to form strip samples. In-flight convection cooling of the droplets followed by conduction and convection cooling at the substrate resulted in rapid solidification of the deposit. During operation, the inside of the glove box was purged with an inert gas to limit the effects of in-flight oxidation of the particles and spray-formed strips, as well as to protect personnel from exposure to airborne lead particulate. Remote controls were used to start/stop the spray and control the speed and position of the substrate. In addition, substrate samples were loaded into the substrate translator manually using the gloved side ports of the box. In this way, the glove box remained closed during a series of spray trials, and was opened only when loading the crucible with a lead charge or when removing lead strip samples for shipment to JCI.

McHugh, K.

1996-04-10T23:59:59.000Z

413

Method of forming aluminum oxynitride material and bodies formed by such methods  

DOE Patents (OSTI)

Methods of forming aluminum oxynitride (AlON) materials include sintering green bodies comprising aluminum orthophosphate or another sacrificial material therein. Such green bodies may comprise aluminum, oxygen, and nitrogen in addition to the aluminum orthophosphate. For example, the green bodies may include a mixture of aluminum oxide, aluminum nitride, and aluminum orthophosphate or another sacrificial material. Additional methods of forming aluminum oxynitride (AlON) materials include sintering a green body including a sacrificial material therein, using the sacrificial material to form pores in the green body during sintering, and infiltrating the pores formed in the green body with a liquid infiltrant during sintering. Bodies are formed using such methods.

Bakas, Michael P. (Ammon, ID); Lillo, Thomas M. (Idaho Falls, ID); Chu, Henry S. (Idaho Falls, ID)

2010-11-16T23:59:59.000Z

414

Directory of energy data collection forms. Forms in use as of October 1995  

SciTech Connect

This is an authoritative listing of selected public use forms currently used as basic energy information gathering tools by the Department of Energy (DOE). This directory provides an overview of DOE`s energy information collection programs for decisionmakers in Government and industry. Forms designed to collect energy information and used by the Energy Information Administration (EIA) as of October 1995 are included in this directory. For each form listed in this directory, an abstract is included that describes the form`s uses, its respondents, and the data collected. For the reader`s convenience in finding specific types of collections, several indices have been provided in this directory. A listing of the forms grouped by energy source and function begins on page 26. Beginning on page 38 are the publications derived from the collections, and on page 50, are the forms linked to general respondent categories.

NONE

1996-01-01T23:59:59.000Z

415

Combined electrophoresis-electrospray interface and method  

DOE Patents (OSTI)

A system and method for analyzing molecular constituents of a composition sample includes: forming a solution of the sample, separating the solution by capillary electrophoresis into an eluent of constituents longitudinally separated according to their relative electrophoretic mobilities, electrospraying the eluent to form a charged spray in which the molecular constituents have a temporal distribution; and detecting or collecting the separated constituents in accordance with the temporal distribution in the spray. A first high-voltage (e.g., 5--100 kVDC) is applied to the solution. The spray is charged by applying a second high voltage (e.g., [+-]2--8 kVDC) between the eluent at the capillary exit and a cathode spaced in front of the exit. A complete electrical circuit is formed by a conductor which directly contacts the eluent at the capillary exit, or by conduction through a sheath electrode discharged in an annular sheath flow about the capillary exit. 21 figs.

Smith, R.P.; Udseth, H.R.; Olivares, J.A.

1989-12-05T23:59:59.000Z

416

Combined electrophoresis-electrospray interface and method  

SciTech Connect

A system and method for analyzing molecular constituents of a composition sample includes: forming a solution of the sample, separating the solution by capillary electrophoresis into an eluent of constituents longitudinally separated according to their relative electrophoretic mobilities, electrospraying the eluent to form a charged spray in which the molecular constituents have a temporal distribution; and detecting or collecting the separated constituents in accordance with the temporal distribution in the spray. A first high-voltage (e.g., 5-100 KVDC) is applied to the solution. The spray is charged by applying a second high voltage (e.g., .+-.2-8 KVDC) between the eluent at the capillary exit and a cathode spaced in front of the exit. A complete electrical circuit is formed by a conductor which directly contacts the eluent at the capillary exit, or by conduction through a sheath electrode discharged in an annular sheath flow about the capillary exit.

Smith, Richard D. (Richland, WA); Udseth, Harold R. (Richland, WA); Olivares, Jose A. (Los Alamos, NM)

1994-01-01T23:59:59.000Z

417

Combined electrophoresis-electrospray interface and method  

DOE Patents (OSTI)

A system and method for analyzing molecular constituents of a composition sample includes: forming a solution of the sample, separating the solution by capillary electrophoresis into an eluent of constituents longitudinally separated according to their relative electrophoretic mobilities, electrospraying the eluent to form a charged spray in which the molecular constituents have a temporal distribution; and detecting or collecting the separated constituents in accordance with the temporal distribution in the spray. A first high-voltage (e.g., 5-100 KVDC) is applied to the solution. The spray is charged by applying a second high voltage (e.g., .+-.2-8 KVDC) between the eluent at the capillary exit and a cathode spaced in front of the exit. A complete electrical circuit is formed by a conductor which directly contacts the eluent at the capillary exit, or by conduction through a sheath electrode discharged in an annular sheath flow about the capillary exit.

Smith, Richard P. (Richland, WA); Udseth, Harold R. (Richland, WA); Olivares, Jose A. (North Augusta, SC)

1989-01-01T23:59:59.000Z

418

Combined electrophoresis-electrospray interface and method  

DOE Patents (OSTI)

A system and method for analyzing molecular constituents of a composition sample include: forming a solution of the sample, separating the solution by capillary electrophoresis into an eluent of constituents longitudinally separated according to their relative electrophoretic mobilities, electrospraying the eluent to form a charged spray in which the molecular constituents have a temporal distribution; and detecting or collecting the separated constituents in accordance with the temporal distribution in the spray. A first high-voltage (e.g., 5--100 kVDC) is applied to the solution. The spray is charged by applying a second high voltage (e.g.,{+-}2--8 kVDC) between the eluent at the capillary exit and a cathode spaced in front of the exit. A complete electrical circuit is formed by a conductor which directly contacts the eluent at the capillary exit, or by conduction through a sheath electrode discharged in an annular sheath flow about the capillary exit. 21 figs.

Smith, R.D.; Udseth, H.R.; Olivares, J.A.

1994-10-18T23:59:59.000Z

419

Recent INEL spray-forming developments  

SciTech Connect

Spray forming is a near-net-shape fabrication technology in which a spray of finely atomized liquid droplets is deposited onto a suitably shaped substrate or mold to produce a coherent solid. The technology offers unique opportunities for simplifying materials processing, oftentimes while substantially improving product quality. Spray forming can be performed with a wide range of metals and nonmetals, and offersproperty improvements resulting from rapid solidification (eg. refined microstructures, extended solid solubilities and reduced segregation). Economic benefits result from process simplification and the elimination of unit operations. Researchers at the Idaho National Engineering Laboratory (INEL) are developing spray-forming technology for producing near-net-shape solids and coatings of a variety of metals, polymers, and composite materials using de Laval nozzles. Results from several spray-forming programs are presented to illustrate the range of capabilities of the approach as well as the technical and economic benefits. These programs involved the production of low-carbon steel strip and SiC particulate reinforced aluminum strip; recent advances in spray forming tooling using low-melting-point metals are also described.

McHugh, K.M.; Key, J.F.

1992-01-01T23:59:59.000Z

420

Recent INEL spray-forming developments  

SciTech Connect

Spray forming is a near-net-shape fabrication technology in which a spray of finely atomized liquid droplets is deposited onto a suitably shaped substrate or mold to produce a coherent solid. The technology offers unique opportunities for simplifying materials processing, oftentimes while substantially improving product quality. Spray forming can be performed with a wide range of metals and nonmetals, and offersproperty improvements resulting from rapid solidification (eg. refined microstructures, extended solid solubilities and reduced segregation). Economic benefits result from process simplification and the elimination of unit operations. Researchers at the Idaho National Engineering Laboratory (INEL) are developing spray-forming technology for producing near-net-shape solids and coatings of a variety of metals, polymers, and composite materials using de Laval nozzles. Results from several spray-forming programs are presented to illustrate the range of capabilities of the approach as well as the technical and economic benefits. These programs involved the production of low-carbon steel strip and SiC particulate reinforced aluminum strip; recent advances in spray forming tooling using low-melting-point metals are also described.

McHugh, K.M.; Key, J.F.

1992-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "form eia-920 combined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

FORMED CORE SAMPLER HYDRAULIC CONDUCTIVITY TESTING  

SciTech Connect

A full-scale formed core sampler was designed and functionally tested for use in the Saltstone Disposal Facility (SDF). Savannah River National Laboratory (SRNL) was requested to compare properties of the formed core samples and core drilled samples taken from adjacent areas in the full-scale sampler. While several physical properties were evaluated, the primary property of interest was hydraulic conductivity. Differences in hydraulic conductivity between the samples from the formed core sampler and those representing the bulk material were noted with respect to the initial handling and storage of the samples. Due to testing conditions, the site port samples were exposed to uncontrolled temperature and humidity conditions prior to testing whereas the formed core samples were kept in sealed containers with minimal exposure to an uncontrolled environment prior to testing. Based on the results of the testing, no significant differences in porosity or density were found between the formed core samples and those representing the bulk material in the test stand.

Miller, D.; Reigel, M.

2012-09-25T23:59:59.000Z

422

Combined coal gasifier and fuel cell system and method  

DOE Patents (OSTI)

This report describes a process whereby a molten carbonate fuel cell is combined with a catalytic coal or coal char gasifier for providing the reactant gases comprising hydrogen, carbon monoxide and carbon dioxide used in the operation of the fuel cell. These reactant gases are stripped of sulfur compounds and particulate material and are then separated in discrete gas streams for conveyance to appropriate electrodes in the fuel cell. The gasifier is arranged to receive the reaction products generated at the anode of the fuel cell by the electricity-producing electrochemical reaction therein. These reaction products from the anode are formed primarily of high temperature steam and carbon dioxide to provide the steam, the atmosphere and the heat necessary to endothermically pyrolyze the coal or char in the presence of a catalyst. The reaction products generated at the cathode are substantially formed of carbon dioxide which is used to heat air being admixed with the carbon dioxide stream from the gasifier for providing the oxygen required for the reaction in the fuel cell and for driving an expansion device for energy recovery. A portion of this carbon dioxide from the cathode may be recycled into the fuel cell with the air-carbon dioxide mixture. 1 fig.

Gmeindl, F.D.; Geisbrecht, R.A.

1989-06-26T23:59:59.000Z

423

Combined goal gasifier and fuel cell system and method  

DOE Patents (OSTI)

A molten carbonate fuel cell is combined with a catalytic coal or coal char gasifier for providing the reactant gases comprising hydrogen, carbon monoxide and carbon dioxide used in the operation of the fuel cell. These reactant gases are stripped of sulfur compounds and particulate material and are then separated in discrete gas streams for conveyance to appropriate electrodes in the fuel cell. The gasifier is arranged to receive the reaction products generated at the anode of the fuel cell by the electricity-producing electrochemical reaction therein. These reaction products from the anode are formed primarily of high temperature steam and carbon dioxide to provide the steam, the atmosphere and the heat necessary to endothermically pyrolyze the coal or char in the presence of a catalyst. The reaction products generated at the cathode are substantially formed of carbon dioxide which is used to heat air being admixed with the carbon dioxide stream from the gasifier for providing the oxygen required for the reaction in the fuel cell and for driving an expansion device for energy recovery. A portion of this carbon dioxide from the cathode may be recycled into the fuel cell with the air-carbon dioxide mixture.

Gmeindl, Frank D. (Morgantown, WV); Geisbrecht, Rodney A. (New Alexandria, PA)

1990-01-01T23:59:59.000Z

424

2011 Form EIA-63A Instructions  

U.S. Energy Information Administration (EIA) Indexed Site

U. S. DEPARTMENT OF ENERGY U. S. DEPARTMENT OF ENERGY Form Approved U.S. ENERGY INFORMATION ADMINISTRATION OMB No. 1905-0196 Washington, DC 20585 Expires: 12/31/2013 FORM EIA-63A ANNUAL SOLAR THERMAL COLLECTOR/REFLECTOR SHIPMENTS REPORT GENERAL INFORMATION AND INSTRUCTIONS I. Purpose Form EIA-63A is designed to provide the data necessary for the U.S. Energy Information Administration (EIA), a part of the U.S. Department of Energy (DOE), to carry out its responsibilities tracking collector/reflector shipments in the solar thermal industry and reporting information concerning the size and status of the industry. The data collected will be published in the Renewable Energy Annual and also be available through EIA's Internet site at http://www.eia.gov/fuelrenewable.html.

425

Security Forms and Information | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Services » New Employee Orientation » Security Forms and Services » New Employee Orientation » Security Forms and Information Security Forms and Information Homeland Security Presidential Directive HSPD-12 established new policy for a common identification standard for Federal Employees and contractors. As of October 27, 2005, all new Federal employees assigned to the DOE Headquarters complex are required to present two identity source documents (i.e., U.S. Passport, driver's license, identification card with photograph issued by a Federal, state, or local government agency, etc.), have their fingerprints taken, and undergo a background investigation (the identity proofing process) prior to reporting for duty or being issued a DOE standard badge (identity or PIV badge). Most likely, your HR representative and/or administrative personnel have

426

FAQs for Survey Form EIA-182  

Gasoline and Diesel Fuel Update (EIA)

FAQs for Survey Form EIA-182 FAQs for Survey Form EIA-182 What is the purpose of this survey? Form EIA-182, "Domestic Crude Oil First Purchase Report" is designed to collect data on both the average cost and volume associated with the physical and financial transfer of domestic crude oil off the property on which it was produced. The monthly reported data represent the initial market value and volume of domestic crude oil production. What are the published domestic crude oil first purchase prices? The domestic crude oil first purchase price is associated with only those companies that purchase crude oil the moment the oil leaves the lease on which it was produced. Companies are asked to report the average cost per barrel and total volume purchased for requested crude streams purchased in

427

STUDENT INTERN RELOCATION BENEFIT REQUEST FORM  

NLE Websites -- All DOE Office Websites (Extended Search)

01-RBR (8-2013) 01-RBR (8-2013) UCI (When Completed) UCI (When Completed) STUDENT INTERN RELOCATION BENEFIT REQUEST FORM Instructions for New Hire, Re-hire or Year-round Intern returning to Sandia work site from remote location: Review eligibility criteria below. If you believe that you may be eligible to receive relocation benefits from Sandia, complete and sign this form, then return to the CA or NM Student Intern Programs office. ELIGIBILITY CRITERIA Name: Phone: Email: School/Academic Residence Address Permanent Address Address 1 Address 2 City State Zip Code Student Acknowledgement: I certify that the information stated on this form is correct and complete to best of my knowledge. I

428

Forms & Applications | Stanford Synchrotron Radiation Lightsource  

NLE Websites -- All DOE Office Websites (Extended Search)

Forms & Applications Forms & Applications Forms: Before You Arrive User Information Log in to the User Portal to Register or Update Contact Informatioin Proposals Submit Proposals via User Portal (including Rapid Access and Letters of Intent) Proposal Extension Requests X-ray/VUV/SMB Macromolecular Crystallography (MC) User Agreements Non-Proprietary User Agreement Proprietary Research User Agreement Beam Time & Support Requests Log in to User Portal to Submit Beam Time or User Support Requests Computer Account X-ray/VUV/SMB Macromolecular Crystallography Use of SLAC Information Resources (submit with account request) User Financial Account User Financial Account Gas & Cryogenics Liquid Helium & Standard/Specialty Shipping & Receiving Hazardous Materials Shipper Non-Hazardous Materials Shipper

429

FAQs for Survey Forms 805 and 815  

Gasoline and Diesel Fuel Update (EIA)

Forms 805 and 815 Forms 805 and 815 On the EIA-815 survey, what should be reported in the "Fuel Uses & Losses During Month" column? The fuel use and loss column should only be used to report losses caused by spills, fires, contamination, and volumes used as fuel at a terminal. Data reported in these cells and all cells on the EIA-815 survey should always be positive. Do not use the fuel uses and losses column to correct line imbalances due to rounding. Line imbalances due to heat or pressure related variations, gauging problems, accounting adjustments and rounding that are less than or equal to 5 thousand barrels are acceptable. Line imbalances larger than 5 thousand barrels should be investigated for possible errors. EIA-805 Survey form & instructions Contact: Robert Merriam,

430

FAQs for Survey Forms 809 and 819  

Gasoline and Diesel Fuel Update (EIA)

9 and 819 9 and 819 EIA-809 (Weekly Oxygenate Report) How do I submit the form? There are four ways to submit the EIA-809 form. Secure File Transfer: https://signon.eia.doe.gov/upload/noticeoog.jsp The Secure File Transfer System uses the secure hypertext transfer protocol (HTTPS), an industry standard method to send information over the web using secure, encrypted processes. Electronic Filing Option: The PC Electronic Data Reporting Option (PEDRO) is a Windows-based application that will enable you to enter data interactively, import data from your own database, validate your data online, and transmit the encrypted data electronically to EIA via the Internet or a dial-up modem. To receive this free software call (202) 586-9659. Email: oog.surveys@eia.gov Fax forms to: (202) 586-1076

431

Paramagnetic form factors from itinerant electron theory  

Science Conference Proceedings (OSTI)

Elastic neutron scattering experiments performed over the past two decades have provided accurate information about the magnetic form factors of paramagnetic transition metals. These measurements have traditionally been analyzed in terms of an atomic-like theory. There are, however, some cases where this procedure does not work, and there remains the overall conceptual problem of using an atomistic theory for systems where the unpaired-spin electrons are itinerant. We have recently developed computer codes for efficiently evaluating the induced magnetic form factors of fcc and bcc itinerant electron paramagnets. Results for the orbital and spin contributions have been obtained for Cr, Nb, V, Mo, Pd and Rh based on local density bands. By using calculated spin enhancement parameters, we find reasonable agreement between theory and neutron form factor data. In addition, these zero parameter calculations yield predictions for the bulk susceptibility on an absolute scale which are in reasonable agreement with experiment in all treated cases except palladium.

Cooke, J.F.; Liu, S.H.; Liu, A.J.

1984-09-01T23:59:59.000Z

432

Mixed low-level waste form evaluation  

Science Conference Proceedings (OSTI)

A scoping level evaluation of polyethylene encapsulation and vitreous waste forms for safe storage of mixed low-level waste was performed. Maximum permissible radionuclide concentrations were estimated for 15 indicator radionuclides disposed of at the Hanford and Savannah River sites with respect to protection of the groundwater and inadvertent intruder pathways. Nominal performance improvements of polyethylene and glass waste forms relative to grout are reported. These improvements in maximum permissible radionuclide concentrations depend strongly on the radionuclide of concern and pathway. Recommendations for future research include improving the current understanding of the performance of polymer waste forms, particularly macroencapsulation. To provide context to these estimates, the concentrations of radionuclides in treated DOE waste should be compared with the results of this study to determine required performance.

Pohl, P.I.; Cheng, Wu-Ching; Wheeler, T.; Waters, R.D.

1997-03-01T23:59:59.000Z

433

Density of Spray-Formed Materials  

SciTech Connect

Spray Forming is an advanced materials processing technology that transforms molten metal into a near-net-shape solid by depositing atomized droplets onto a substrate. Depending on the application, the spray-formed material may be used in the as-deposited condition or it may undergo post-deposition processing. Regardless, the density of the as-deposited material is an important issue. Porosity is detrimental because it can significantly reduce strength, toughness, hardness and other properties. While it is not feasible to achieve fully-dense material in the as-deposited state, density greater than 99% of theoretical density is possible if the atomization and impact conditions are optimized. Thermal conditions at the deposit surface and droplet impact angle are key processing parameters that influence the density of the material. This paper examines the factors that contribute to porosity formation during spray forming and illustrates that very high as-deposited density is achieved by optimizing processing parameters.

Kevin M. McHugh; Volker Uhlenwinkel; Nils Ellendr

2008-06-01T23:59:59.000Z

434

APS Visitor Registration Form | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

APS Visitor Registration Form APS Visitor Registration Form To request access as a visitor who will not do hands-on work, please complete this form. For assistance, contact the APS User Office by phone at (630) 252-9090 or by email at apsuser@aps.anl.gov. Please request access directly by contacting the APS User Office by phone at (630) 252-9090 or by email at apsuser@aps.anl.gov. If you are concerned about sending your passport and visa information, leave those fields blank and fax a letter to (630) 252-9250. To Request APS Visitor Registration, please enter the following: * indicates required field First Name*: Middle Initial/Name*: Last Name*: Title: Organization*: Department: Address 1*: Address 2: City*: State*: Zip Code*: Country: Phone*: Fax: E-mail Address*: Gender*: Female

435

Combine, Texas: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Combine, Texas: Energy Resources Combine, Texas: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 32.5884683°, -96.5085994° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":32.5884683,"lon":-96.5085994,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

436

Combined Systems with Tankless Water Heaters  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Combined Systems with Tankless Water Heaters Combined Systems with Tankless Water Heaters Armin Rudd Residential Energy Efficiency Stakeholder Meeting 2/29 - 3/2/2012 Austin, Texas 2 Residential Energy Efficiency Stakeholder Meeting 2/29 - 3/2/2012 Austin, Texas More builder's wanting to use gas-fired tankless water heaters, and with solar pre-heat  Endless hot water  Helps HERS Index  Space saving 2 3 Residential Energy Efficiency Stakeholder Meeting 2/29 - 3/2/2012 Austin, Texas Problem with elevated TWH inlet temperature 60 70 80 90 100 110 120 130 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 Maximum Inlet Temperature (F) DHW flow rate (gpm) Maximum TWH inlet temperature to stay below 125 F delivered temperature, with 15 kBtu/h minimum firing rate Typical shower temperature 4 Residential Energy Efficiency Stakeholder Meeting

437

Wood Burning Combined Cycle Power Plant  

E-Print Network (OSTI)

A combined cycle power plant utilizing wood waste products as a fuel has been designed. This plant will yield a 50% efficiency improvement compared to conventional wood-fueled steam power plants. The power plant features an externally-fired gas turbine combined cycle system that obtains its heat input from a high temperature, high pressure ceramic air heater burning wood waste products as a fuel. This paper presents the results of the design study including the cycle evaluation and a description of the major components of the power plant. The cycle configuration is based on maximum fuel efficiency with minimum capital equipment risk. The cycle discussion includes design point performance of the power plant. The design represents a significant step forward in wood-fueled power plants.

Culley, J. W.; Bourgeois, H. S.

1984-01-01T23:59:59.000Z

438

Additive combinations and fuels containing them  

Science Conference Proceedings (OSTI)

An additive combination for improving the cold flow properties of distillate fuels comprises a combination of: (A) a distillate flow improver which is an ethylene containing polymer, preferably a copolymer of ethylene with unsaturated esters, e.g., vinyl acetate; (B) a hydrocarbon polymer of C/sub 2/ to C/sub 3/0 olefin of number average molecular weight of 103 to 106 or derivatized version thereof, for example copolymers of ethylene and propylene, or polyisobutylene, which are used as lubricating oil V.I. improvers; and (C) a polar oil soluble compound which includes amides, salts, carboxylates, sulfonates, sulfates, phosphates, phenates and borates, having hydrocarbon solubilizing groups, for example salts and amides of polycarboxylic acid such as phthalic anhydride reacted with hydrogenated secondary tallow amine.

Lewtas, K.; Oswald, A.A.; Rehrer, D.H.; Rossi, A.; Tack, R.D.

1983-03-08T23:59:59.000Z

439

Document Certification and Transmittal Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Transmittal Form Document Certification and Transmittal Form Use this form to submit a NEPA document to the Office of NEPA Policy and Compliance for website posting....

440

Annual Electric Utility Data - Form EIA-906 Database  

U.S. Energy Information Administration (EIA) Indexed Site

Detailed data files > Historic Form EIA-906 Historic Form EIA-906 Detailed Data with previous form data (EIA-759) Historic electric utility data files include information on net...

Note: This page contains sample records for the topic "form eia-920 combined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

DOE Emergency Special Needs Self-Identification Form | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Emergency Special Needs Self-Identification Form DOE Emergency Special Needs Self-Identification Form Emergency Special Needs Self-Identification Form DOE Emergency Special Needs...

442

Atomization methods for forming magnet powders  

SciTech Connect

The invention encompasses methods of utilizing atomization, methods for forming magnet powders, methods for forming magnets, and methods for forming bonded magnets. The invention further encompasses methods for simulating atomization conditions. In one aspect, the invention includes an atomization method for forming a magnet powder comprising: a) forming a melt comprising R.sub.2.1 Q.sub.13.9 B.sub.1, Z and X, wherein R is a rare earth element; X is an element selected from the group consisting of carbon, nitrogen, oxygen and mixtures thereof; Q is an element selected from the group consisting of Fe, Co and mixtures thereof; and Z is an element selected from the group consisting of Ti, Zr, Hf and mixtures thereof; b) atomizing the melt to form generally spherical alloy powder granules having an internal structure comprising at least one of a substantially amorphous phase or a substantially nanocrystalline phase; and c) heat treating the alloy powder to increase an energy product of the alloy powder; after the heat treatment, the alloy powder comprising an energy product of at least 10 MGOe. In another aspect, the invention includes a magnet comprising R, Q, B, Z and X, wherein R is a rare earth element; X is an element selected from the group consisting of carbon, nitrogen, oxygen and mixtures thereof; Q is an element selected from the group consisting of Fe, Co and mixtures thereof; and Z is an element selected from the group consisting of Ti, Zr, Hf and mixtures thereof; the magnet comprising an internal structure comprising R.sub.2.1 Q.sub.13.9 B.sub.1.

Sellers, Charles H. (Idaho Falls, ID); Branagan, Daniel J. (Idaho Falls, ID); Hyde, Timothy A. (Idaho Falls, ID)

2000-01-01T23:59:59.000Z

443

Combined Operating License Model Program Plan  

Science Conference Proceedings (OSTI)

The Model Program Plan (MPP) provides functional guidance on how to prepare a Combined Operating License (COL) application for a new nuclear power facility when incorporating previous findings from both design certification (DC) and an early site permit (ESP) proceedings. The plan identifies the activities necessary to prepare an application and provides guidance on planning and managing a COL program, including working with DC and ESP holders and using subcontracted resources to develop necessary new in...

2003-11-17T23:59:59.000Z

444

SOFC combined cycle systems for distributed generation  

SciTech Connect

The final phase of the tubular SOFC development program will focus on the development and demonstration of pressurized solid oxide fuel cell (PSOFC)/gas turbine (GT) combined cycle power systems for distributed power applications. The commercial PSOFC/GT product line will cover the power range 200 kWe to 50 MWe, and the electrical efficiency for these systems will range from 60 to 75% (net AC/LHV CH4), the highest of any known fossil fueled power generation technology. The first demonstration of a pressurized solid oxide fuel cell/gas turbine combined cycle will be a proof-of-concept 250 kWe PSOFC/MTG power system consisting of a single 200 kWe PSOFC module and a 50 kWe microturbine generator (MTG). The second demonstration of this combined cycle will be 1.3 MWe fully packaged, commercial prototype PSOFC/GT power system consisting of two 500 kWe PSOFC modules and a 300 kWe gas turbine.

Brown, R.A.

1997-05-01T23:59:59.000Z

445

Mental Representations Formed From Educational Website Formats  

Science Conference Proceedings (OSTI)

The increasing popularity of web-based distance education places high demand on distance educators to format web pages to facilitate learning. However, limited guidelines exist regarding appropriate writing styles for web-based distance education. This study investigated the effect of four different writing styles on reader’s mental representation of hypertext. Participants studied hypertext written in one of four web-writing styles (e.g., concise, scannable, objective, and combined) and were then administered a cued association task intended to measure their mental representations of the hypertext. It is hypothesized that the scannable and combined styles will bias readers to scan rather than elaborately read, which may result in less dense mental representations (as identified through Pathfinder analysis) relative to the objective and concise writing styles. Further, the use of more descriptors in the objective writing style will lead to better integration of ideas and more dense mental representations than the concise writing style.

Elizabeth T. Cady; Kimberly R. Raddatz; Tuan Q. Tran; Bernardo de la Garza; Peter D. Elgin

2006-10-01T23:59:59.000Z

446

Investigation of gasification chemical looping combustion combined cycle performance  

SciTech Connect

A novel combined cycle based on coal gasification and chemical looping combustion (CLC) offers a possibility of both high net power efficiency and separation of the greenhouse gas CO{sub 2}. The technique involves the use of a metal oxide as an oxygen carrier, which transfers oxygen from the combustion air to the fuel, and the avoidance of direct contact between fuel and combustion air. The fuel gas is oxidized by an oxygen carrier, an oxygen-containing compound, in the fuel reactor. The oxygen carrier in this study is NiO. The reduced oxygen carrier, Ni, in the fuel reactor is regenerated by the air in the air reactor. In this way, fuel and air are never mixed, and the fuel oxidation products CO{sub 2} and water vapor leave the system undiluted by air. All that is needed to get an almost pure CO{sub 2} product is to condense the water vapor and to remove the liquid water. When the technique is combined with gas turbine and heat recovery steam generation technology, a new type of combined cycle is formed which gives a possibility of obtaining high net power efficiency and CO{sub 2} separation. The performance of the combined cycle is simulated using the ASPEN software tool in this paper. The influence of the water/coal ratio on the gasification and the influence of the CLC process parameters such as the air reactor temperature, the turbine inlet supplementary firing, and the pressure ratio of the compressor on the system performance are discussed. Results show that, assuming an air reactor temperature of 1200{sup o}C, a gasification temperature of 1100 {sup o}C, and a turbine inlet temperature after supplementary firing of 1350{sup o}C, the system has the potential to achieve a thermal efficiency of 44.4% (low heating value), and the CO{sub 2} emission is 70.1 g/(kW h), 90.1% of the CO{sub 2} captured. 22 refs., 7 figs., 6 tabs.

Wenguo Xiang; Sha Wang; Tengteng Di [Southeast University, Nanjing (China). Key Laboratory of Clean Coal Power Generation and Combustion Technology of the Ministry of Education

2008-03-15T23:59:59.000Z

447

Directory of energy data collection forms: Forms in use as of October 1994  

SciTech Connect

This 18th edition directory provides an overview of DOE`s energy information collection programs for decisionmakers in Government and industry; selected public use forms currently used as basic energy information gathering tools by DOE are covered. For each form, an abstract is included that describes the form`s uses, its respondents, and the data collected. Also shown are frequently requested items: energy sources and functions covered by the form, general categories of respondents, collection frequency, public laws and regulations, reporting requirement, name and phone number of the data collection manager, and the publications resulting from the data collection. Indexes, arranged according to energy source/function, publications, respondent categories, former EIA form number designations, and collection authorities, are provided.

Not Available

1994-12-15T23:59:59.000Z

448

New Species of Cyanobacteria Forms Intracellular Carbonates  

NLE Websites -- All DOE Office Websites (Extended Search)

New Species of Cyanobacteria New Species of Cyanobacteria Forms Intracellular Carbonates New Species of Cyanobacteria Forms Intracellular Carbonates Print Wednesday, 30 January 2013 00:00 A new species of cyanobacteria-photosynthetic bacteria that occupy a wide array of habitats-was discovered in the Mexican Lake of Alchichica where massive carbonate rocks form. Cyanobacteria have been impacting the global carbon cycle of the Earth for more than 2.3 billion years by assimilating CO2 into organic compounds and triggering calcium carbonate (CaCO3) precipitation. Despite the importance of this cyanobacteria-mediated CaCO3 biomineralization, the mechanistic details of this process are still poorly understood. Scientists agree that calcification in cyanobacteria is an extracellular process: Photosynthesizing cells commonly export the photosynthesis byproduct CO32- outside their cells where it bonds with an alkaline earth metal like Ca2+. The cyanobacteria recently found in Lake Alchichica, however, forms amorphous Ca-, Mg-, Sr- and Ba-rich carbonates intracellularly. This discovery significantly modifies the traditional view of how bacteria induce CaCO3 precipitation and may improve understanding of the fossil record by hinting at ancient traces of life in rocks, or designing new routes for sequestering CO2 or 90Sr in minerals.

449

New Species of Cyanobacteria Forms Intracellular Carbonates  

NLE Websites -- All DOE Office Websites (Extended Search)

New Species of Cyanobacteria Forms Intracellular Carbonates Print New Species of Cyanobacteria Forms Intracellular Carbonates Print A new species of cyanobacteria-photosynthetic bacteria that occupy a wide array of habitats-was discovered in the Mexican Lake of Alchichica where massive carbonate rocks form. Cyanobacteria have been impacting the global carbon cycle of the Earth for more than 2.3 billion years by assimilating CO2 into organic compounds and triggering calcium carbonate (CaCO3) precipitation. Despite the importance of this cyanobacteria-mediated CaCO3 biomineralization, the mechanistic details of this process are still poorly understood. Scientists agree that calcification in cyanobacteria is an extracellular process: Photosynthesizing cells commonly export the photosynthesis byproduct CO32- outside their cells where it bonds with an alkaline earth metal like Ca2+. The cyanobacteria recently found in Lake Alchichica, however, forms amorphous Ca-, Mg-, Sr- and Ba-rich carbonates intracellularly. This discovery significantly modifies the traditional view of how bacteria induce CaCO3 precipitation and may improve understanding of the fossil record by hinting at ancient traces of life in rocks, or designing new routes for sequestering CO2 or 90Sr in minerals.

450

Plate forming and break down pizza box  

SciTech Connect

A standard corrugated paper pizza box is provided with slit cuts cut through the top panel of the pizza box in a shape to form four circular serving plates with a beveled raised edge and cross slit cuts through the bottom panel of the pizza box separating the box into four essentially equal portions for easy disposal.

Pantisano, Frank (411 Linda Ave., Blackwood, NJ 08012); Devine, Scott M. (B7 Fairways Apartments, Blackwood, NJ 08012)

1992-01-01T23:59:59.000Z

451

COMMISSION REPORT FORMS AND INSTRUCTIONS FOR  

E-Print Network (OSTI)

explain the units reported (for example, number of customers or number of accounts), and whether Division. Publication number: CEC-200-2010-007-CMF. iii #12;TABLE OF CONTENTS ABSTRACT ................................................7 Form 1.3 Peak Demand by Sector (Bundled Customers

452

MEDICAL/ DENTAL/ VISION ENROLLMENT / CHANGE FORM  

E-Print Network (OSTI)

MEDICAL/ DENTAL/ VISION ENROLLMENT / CHANGE FORM Changes are effective the 1st of the next month UNM Medical Plan Third Party Administrator Election Dental Plan Election Vision Plan Election Lovelace: (Add or Remove) Mark Type of Coverage for each Enrollee Spouse Add Remove Medical Dental Vision

New Mexico, University of

453

Texas Union Pizza Order Form ROOM RESERVED ______________________________________________________  

E-Print Network (OSTI)

#12;#12;Texas Union Pizza Order Form ROOM RESERVED: ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ Pick-up All orders are to be picked up at the Texas Union Hospitality Center desk in the south end West with the Texas Union Policies and Procedures. I understand that I will be held responsible for any debts incurred

Texas at Austin, University of

454

4-H Club Officer Handbook - Forms  

E-Print Network (OSTI)

This section from the 4-H Club Officer Handbook contains key forms that various clubs leader rely on to help them carry out their duties. Included are sample checks and deposit slips to help make practice perfect for the Treasurer. Taking minutes and keeping track of attendance are tasks made more simple with a sample roster, agenda worksheet and contact sheet.

Howard, Jeff W.

2006-08-09T23:59:59.000Z

455

Methods for forming wellbores in heated formations  

DOE Patents (OSTI)

A method for forming a wellbore in a heated formation includes flowing liquid cooling fluid to a bottom hole assembly in a wellbore in a heated formation. At least a portion of the liquid cooling fluid is vaporized at or near a region to be cooled. Vaporizing the liquid cooling fluid absorbs heat from the region to be cooled.

Guimerans, Rosalvina Ramona; Mansure, Arthur James

2012-09-25T23:59:59.000Z

456

Technetium Waste Form Development Progress Report  

SciTech Connect

The approach being followed to evaluate the use of an iron-based alloy waste form to immobilize the Tc-bearing waste streams generated during the aqueous and electrochemical processing of used fuel that is being studied in the DOE Advanced Fuel Cycle Initiative (AFCI) is presented in this report. The objective is to develop an alloy waste form that provides high waste loading within waste form processing limitations, meets waste form performance requirements for durability and the long-term retention of radionuclides, and can be produced with consistent physical, chemical, and radiological properties that meet regulatory acceptance requirements for disposal. Microanalysis using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) was used to analyze non-radioactive Fe-Mo-Re samples. A sample was prepared for SEM; however, significant unforeseen instrument problems led to delays in conducting the detailed work. The TEM was not available for this particular sample and therefore only preliminary SEM work can be reported. The results are in agreement with previous studies [Ebert 2009]; however, a rhenium-rich region within the Re-Mo phase is clearly visible.

Buck, Edgar C.

2010-02-26T23:59:59.000Z

457

Spray Forming Aluminum - Final Report (Phase II)  

SciTech Connect

The U.S. Department of Energy - Office of Industrial Technology (DOE) has an objective to increase energy efficient and enhance competitiveness of American metals industries. To support this objective, ALCOA Inc. entered into a cooperative program to develop spray forming technology for aluminum. This Phase II of the DOE Spray Forming Program would translate bench scale spray forming technology into a cost effective world class process for commercialization. Developments under DOE Cooperative Agreement No. DE-FC07-94ID13238 occurred during two time periods due to budgetary constraints; April 1994 through September 1996 and October 1997 and December 1998. During these periods, ALCOA Inc developed a linear spray forming nozzle and specific support processes capable of scale-up for commercial production of aluminum sheet alloy products. Emphasis was given to alloys 3003 and 6111, both being commercially significant alloys used in the automotive industry. The report reviews research performed in the following areas: Nozzel Development, Fabrication, Deposition, Metal Characterization, Computer Simulation and Economics. With the formation of a Holding Company, all intellectual property developed in Phases I and II of the Project have been documented under separate cover for licensing to domestic producers.

D. D. Leon

1999-07-08T23:59:59.000Z

458

Forming foam structures with carbon foam substrates  

Science Conference Proceedings (OSTI)

The invention provides foams of desired cell sizes formed from metal or ceramic materials that coat the surfaces of carbon foams which are subsequently removed. For example, metal is located over a sol-gel foam monolith. The metal is melted to produce a metal/sol-gel composition. The sol-gel foam monolith is removed, leaving a metal foam.

Landingham, Richard L.; Satcher, Jr., Joe H.; Coronado, Paul R.; Baumann, Theodore F.

2012-11-06T23:59:59.000Z

459

COMMISSION REPORT FORMS AND INSTRUCTIONS FOR  

E-Print Network (OSTI)

Director #12;ABSTRACT These electric transmission forms ask utility owners of bulk electric transmission on their projects. Electric transmission system owners in California have until March 18, 2011 to submit their data: Electric transmission, bulk electric transmission system facilities, transmission corridor, data request

460

BRAZIL VISITING FELLOWSHIP SCHEME Application Form  

E-Print Network (OSTI)

BRAZIL VISITING FELLOWSHIP SCHEME Application Form APPLICATIONS SHOULD BE TYPEWRITTEN AND BOXES of attendance Qualifications awarded and class of Honours, etc. Principal Subject(s) taken #12;BRAZIL VISITING): Date(s) From To To Nature of work and Position held Name and address of employer #12;BRAZIL VISITING

Birmingham, University of

Note: This page contains sample records for the topic "form eia-920 combined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Page 1 of 1 Author Query Form  

E-Print Network (OSTI)

of uranium by aerosols. 237 Heavy Element Colloids in Nevada Test Site 238 Migration of plutonium and other also been 315 proposed as a waste form for immobilization of plutonium 316 from dismantled nuclear properties of plutonium in natural 566 waters. Environ. Sci. Technol. 1985, 19 (2), 127­ 567 131. 568 28. Kim

Utsunomiya, Satoshi

462

LAND USE, COVER AND FORMS CLASSIFICATION SYSTEM  

E-Print Network (OSTI)

upon request other state agencies in their mapping activities. Although our primary responsibility. 1 #12;2 A committee representing eight state agencies was formed in 1973 to improve land resources data coordination within the various state agencies by reducing duplication of effort and increasing

Binford, Michael W.

463

Active superconducting devices formed of thin films  

DOE Patents (OSTI)

Active superconducting devices are formed of thin films of superconductor which include a main conduction channel which has an active weak link region. The weak link region is composed of an array of links of thin film superconductor spaced from one another by voids and selected in size and thickness such that magnetic flux can propagate across the weak link region when it is superconducting. Magnetic flux applied to the weak link region will propagate across the array of links causing localized loss of superconductivity in the links and changing the effective resistance across the links. The magnetic flux can be applied from a control line formed of a superconducting film deposited coplanar with the main conduction channel and weak link region on a substrate. The devices can be formed of any type to superconductor but are particularly well suited to the high temperature superconductors since the devices can be entirely formed from coplanar films with no overlying regions. The devices can be utilized for a variety of electrical components, including switching circuits, amplifiers, oscillators and modulators, and are well suited to microwave frequency applications.

Martens, Jon S. (Madison, WI); Beyer, James B. (Madison, WI); Nordman, James E. (Madison, WI); Hohenwarter, Gert K. G. (Madison, WI)

1991-05-28T23:59:59.000Z

464

Manifold free multiple sheet superplastic forming  

DOE Patents (OSTI)

Fluid-forming compositions in a container attached to enclosed adjacent sheets are heated to relatively high temperatures to generate fluids (gases) that effect inflation of the sheets. Fluid rates to the enclosed space between the sheets can be regulated by the canal from the container. Inflated articles can be produced by a continuous, rather than batch-type, process.

Elmer, John W. (Danville, CA); Bridges, Robert L. (Knoxville, TN)

2001-01-01T23:59:59.000Z

465

Forming test collections with no system pooling  

Science Conference Proceedings (OSTI)

Forming test collection relevance judgments from the pooled output of multiple retrieval systems has become the standard process for creating resources such as the TREC, CLEF, and NTCIR test collections. This paper presents a series of experiments examining ... Keywords: evaluation of qrel sets, test collection formation

Mark Sanderson; Hideo Joho

2004-07-01T23:59:59.000Z

466

Normal Forms for General Polynomial Matrices - CECM  

E-Print Network (OSTI)

triangular form has many obvious advantages for such operations as solving linear equations it ... where the powers of a positive integer ? give an appropriate shift. ... are useful for nullspace and polynomial system solving problems. ...... [28] V. M. Popov, Some Properties of Control Systems with Irreducible Matrix Transfer  ...

467

New Species of Cyanobacteria Forms Intracellular Carbonates  

NLE Websites -- All DOE Office Websites (Extended Search)

New Species of Cyanobacteria Forms Intracellular Carbonates Print New Species of Cyanobacteria Forms Intracellular Carbonates Print A new species of cyanobacteria-photosynthetic bacteria that occupy a wide array of habitats-was discovered in the Mexican Lake of Alchichica where massive carbonate rocks form. Cyanobacteria have been impacting the global carbon cycle of the Earth for more than 2.3 billion years by assimilating CO2 into organic compounds and triggering calcium carbonate (CaCO3) precipitation. Despite the importance of this cyanobacteria-mediated CaCO3 biomineralization, the mechanistic details of this process are still poorly understood. Scientists agree that calcification in cyanobacteria is an extracellular process: Photosynthesizing cells commonly export the photosynthesis byproduct CO32- outside their cells where it bonds with an alkaline earth metal like Ca2+. The cyanobacteria recently found in Lake Alchichica, however, forms amorphous Ca-, Mg-, Sr- and Ba-rich carbonates intracellularly. This discovery significantly modifies the traditional view of how bacteria induce CaCO3 precipitation and may improve understanding of the fossil record by hinting at ancient traces of life in rocks, or designing new routes for sequestering CO2 or 90Sr in minerals.

468

April, 27, 2010 Forms of Energy  

E-Print Network (OSTI)

Coal Methane Nuclear Oil Renewable Wind Solar Hydro Ethanol?? #12;#12;Carbon Based Energy CoalEnergy and Emissions Christina Gosnell ATOC 3500 April, 27, 2010 #12;Forms of Energy Traditional,744 Mercury 0.000 0.007 0.016 Fossil Fuel Emission Levels Pounds per Billion Btu of Energy Input #12;C+ O2

Toohey, Darin W.

469

New Species of Cyanobacteria Forms Intracellular Carbonates  

NLE Websites -- All DOE Office Websites (Extended Search)

New Species of Cyanobacteria Forms Intracellular Carbonates Print New Species of Cyanobacteria Forms Intracellular Carbonates Print A new species of cyanobacteria-photosynthetic bacteria that occupy a wide array of habitats-was discovered in the Mexican Lake of Alchichica where massive carbonate rocks form. Cyanobacteria have been impacting the global carbon cycle of the Earth for more than 2.3 billion years by assimilating CO2 into organic compounds and triggering calcium carbonate (CaCO3) precipitation. Despite the importance of this cyanobacteria-mediated CaCO3 biomineralization, the mechanistic details of this process are still poorly understood. Scientists agree that calcification in cyanobacteria is an extracellular process: Photosynthesizing cells commonly export the photosynthesis byproduct CO32- outside their cells where it bonds with an alkaline earth metal like Ca2+. The cyanobacteria recently found in Lake Alchichica, however, forms amorphous Ca-, Mg-, Sr- and Ba-rich carbonates intracellularly. This discovery significantly modifies the traditional view of how bacteria induce CaCO3 precipitation and may improve understanding of the fossil record by hinting at ancient traces of life in rocks, or designing new routes for sequestering CO2 or 90Sr in minerals.

470

Federal Energy Management Program: Combined Heat and Power Basics  

NLE Websites -- All DOE Office Websites (Extended Search)

Combined Heat and Power Basics to someone by E-mail Share Federal Energy Management Program: Combined Heat and Power Basics on Facebook Tweet about Federal Energy Management...

471

Combined Heat and Power: A Technology Whose Time Has Come  

E-Print Network (OSTI)

grid, the few buildings equipped with Combined Heat andthe grid system. 29 Source: EPA Combined Heat and Powergrid system. 21 Alternatively, a CHP system collects the wasted heat

Ferraina, Steven

2014-01-01T23:59:59.000Z

472

Changes related to "A Flashing Binary Combined Cycle For Geothermal...  

Open Energy Info (EERE)

Twitter icon Changes related to "A Flashing Binary Combined Cycle For Geothermal Power Generation" A Flashing Binary Combined Cycle For Geothermal Power Generation...

473

Energy Efficiency Improvements Through the Use of Combined Heat...  

NLE Websites -- All DOE Office Websites (Extended Search)

Use of Combined Heat and Power (CHP) in Buildings Combined technology helps Federal energy managers meet mission critical energy needs Buildings Cooling, Heating and Power...

474

Can combining economizers with improved filtration save energy...  

NLE Websites -- All DOE Office Websites (Extended Search)

Contacts Media Contacts Can combining economizers with improved filtration save energy and protect equipment in data centers? Title Can combining economizers with...

475

Complete Set of all Reporting Forms | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Forms More Documents & Publications Natural Gas Exports by Pipeline out of the U.S. Form LNG Exports by Truck out of the U.S. Form CNG Exports by Truck out of the U.S. Form...

476

In-Transit Natural Gas Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

In-Transit Natural Gas Form In-Transit Natural Gas Form Excel Version of In-Transit Natural Gas Form.xlsx PDF Version of In-Transit Natural Gas Form More Documents & Publications...

477

Industrial Distributed Energy: Combined Heat & Power  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

(DOE) (DOE) Industrial Technology Program (ITP) Industrial Distributed Energy: Combined Heat & Power (CHP) Richard Sweetser Senior Advisor DOE's Mid-Atlantic Clean Energy Application Center 32% Helping plants save energy today using efficient energy management practices and efficient new technologies Activities to spur widespread commercial use of CHP and other distributed generation solutions 10% Manufacturing Energy Systems 33% Industries of the Future R&D addressing top priorities in America's most energy-intensive industries and cross-cutting activities applicable to multiple industrial subsectors 25% Industrial Distributed Energy Industrial Technical Assistance DOE ITP FY'11 Budget: $100M Knowledge development and

478

Combination free electron and gaseous laser  

DOE Patents (OSTI)

A multiple laser having one or more gaseous laser stages and one or more free electron stages. Each of the free electron laser stages is sequentially pumped by a microwave linear accelerator. Subsequently, the electron beam is directed through a gaseous laser, in the preferred embodiment, and in an alternative embodiment, through a microwave accelerator to lower the energy level of the electron beam to pump one or more gaseous lasers. The combination laser provides high pulse repetition frequencies, on the order of 1 kHz or greater, high power capability, high efficiency, and tunability in the synchronous production of multiple beams of coherent optical radiation.

Brau, Charles A. (Los Alamos, NM); Rockwood, Stephen D. (Los Alamos, NM); Stein, William E. (Los Alamos, NM)

1980-01-01T23:59:59.000Z

479

Combined fluidized bed retort and combustor  

DOE Patents (OSTI)

The present invention is directed to a combined fluidized bed retorting and combustion system particularly useful for extracting energy values from oil shale. The oil-shale retort and combustor are disposed side-by-side and in registry with one another through passageways in a partition therebetween. The passageways in the partition are submerged below the top of the respective fluid beds to preclude admixing or the product gases from the two chambers. The solid oil shale or bed material is transported through the chambers by inclining or slanting the fluidizing medium distributor so that the solid bed material, when fluidized, moves in the direction of the downward slope of the distributor.

Shang, Jer-Yu (Fairfax, VA); Notestein, John E. (Morgantown, WV); Mei, Joseph S. (Morgantown, WV); Zeng, Li-Wen (Morgantown, WV)

1984-01-01T23:59:59.000Z

480

Solid oxide fuel cell combined cycles  

DOE Green Energy (OSTI)

The integration of the solid oxide fuel cell and combustion turbine technologies can result in combined-cycle power plants, fueled with natural gas, that have high efficiencies and clean gaseous emissions. Results of a study are presented in which conceptual designs were developed for 3 power plants based upon such an integration, and ranging in rating from 3 to 10 MW net ac. The plant cycles are described and characteristics of key components summarized. Also, plant design-point efficiency estimates are presented as well as values of other plant performance parameters.

Bevc, F.P. [Westinghouse Electric Corp., Orlando, FL (United States). Power Generation Business Unit; Lundberg, W.L.; Bachovchin, D.M. [Westinghouse Electric Corp., Pittsburgh, PA (United States). Science and Technology Center

1996-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "form eia-920 combined" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Combined cold compressor/ejector helium refrigerator  

DOE Patents (OSTI)

A refrigeration apparatus having an ejector operatively connected with a cold compressor to form a two-stage pumping system. This pumping system is used to lower the pressure, and thereby the temperature of a bath of boiling refrigerant (helium). The apparatus as thus arranged and operated has substantially improved operating efficiency when compared to other processes or arrangements for achieving a similar low pressure.

Brown, Donald P. (Southold, NY)

1985-01-01T23:59:59.000Z

482

Stacked Switchable Element and Diode Combination  

DOE Patents (OSTI)

A device (10) comprises a semiconductor diode (12) and a switchable element (14) positioned in stacked adjacent relationship so that the semiconductor diode (12) and the switchable element (14) are electrically connected in series with one another. The switchable element (14) is switchable from a low-conductance state to a high-conductance state in response to the application of a forming voltage to the switchable element (14).

Branz, H. M.; Wang, Q.

2006-06-27T23:59:59.000Z

483

Combined cold compressor/ejector helium refrigerator  

DOE Patents (OSTI)

A refrigeration apparatus having an ejector operatively connected with a cold compressor to form a two-stage pumping system. This pumping system is used to lower the pressure, and thereby the temperature of a bath of boiling refrigerant (helium). The apparatus as thus arranged and operated has substantially improved operating efficiency when compared to other processes or arrangements for achieving a similar low pressure.

Brown, D.P.

1984-06-05T23:59:59.000Z

484

Secondary Waste Forms and Technetium Management  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Secondary Waste Forms and Secondary Waste Forms and Technetium Management Joseph H. Westsik, Jr. Pacific Northwest National Laboratory EM HLW Corporate Board Meeting November 18, 2010 What are Secondary Wastes? Process condensates and scrubber and/or off-gas treatment liquids from the pretreatment and ILAW melter facilities at the Hanford WTP. Sent from WTP to the Effluent Treatment Facility (ETF) for treatment and disposal Treated liquid effluents under the ETF State Wastewater Discharge Permit Solidified liquid effluents under the Dangerous Waste Permit for disposal at the Integrated Disposal Facility (IDF) Solidification Treatment Unit to be added to ETF to provide capacity for WTP secondary liquid wastes 2 Evaporator Condensate Solution Evaporator Pretreatment Melter SBS/ WESP Secondary

485

Attachment to Registered Lobbyist Disclosure Form: R  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Registered Lobbyist Disclosure Form: R. Paul Detwiler Registered Lobbyist Disclosure Form: R. Paul Detwiler April 17, 2009 10:10 - 11:15 am At the request of the staff of Pennsylvania State Sen. Jim Ferlo, I attended a meeting of the Pittsburgh Green Innovators to answer logistical questions regarding the availability of Recovery Act funding for energy efficiency and renewable energy projects in Pittsburgh. The meeting was attended by elected officials, their staffs, a representative of a private foundation and others; it focused on a particular project -- renovation of a former vocational school campus in Pittsburgh. The meeting was also attended by Charles J. Kolling, Jr., who identified himself as a registered lobbyist in response to a question I posed to those in attendance. My remarks were limited to logistical matters

486

First Name Last Name EMPLOYEE INFORMATION FORM  

NLE Websites -- All DOE Office Websites (Extended Search)

Name Name Last Name EMPLOYEE INFORMATION FORM Date of Birth SSN Married Not Married Male Female Current Home Address Line 1 Current Home Address Line 2 City State Zip Zip+4 Home Phone Number Department/Agency Operating Administration Office Position Title Grade Work Address Line 1 Work Address Line 2 City State Zip Zip+4 Office Phone Number Affidavit Date Appointment Date Apartment # Middle Name Use as Beneficiary Yes No U.S. Department of Energy 1955 Fremont Avenue Idaho Falls ID 83415 STANDARD FORM 144 (Rev. 10/95) Page 2 Office of Personnel Management The Guide to Processing Personnel Actions STATEMENT OF PRIOR FEDERAL SERVICE To be Completed by Employee NSN 7540-00-634-4101 Previous Edition Usable 144-114 1. Name (Last, First, Middle Initial) 2. Social Security Number 3. Date of Birth (Month, Day, Year)

487

Routine Form EIA-895 Edit Checks Each  

Gasoline and Diesel Fuel Update (EIA)

Routine Routine Form EIA-895 Edit Checks Each filing of the Form EIA-895 is manually checked for reasonableness and mathematical accuracy. Volumes are converted, as necessary, to a standard 14.73 psia pressure base. Value data are compared to the previous year's data for reasonableness. When data on nonhydrocarbon gases re- moved, gas vented and flared, and gas used for repressuring are not reported for a State that historically reported one or more of these items, a volume is imputed. The imputation is based on the average ratio of gas volumes in the missing category to total gross withdrawals in States with values reporting gas in that category. This average ratio is applied to the volume of total gross withdrawals reported by the State to calculate the volume for the missing items. State agencies are contacted by telephone in order to correct errors. Amended filings or resubmissions are not

488

NEPA COMPLIANCE SURVEY NEPA Review Routing Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NEPA Review Routing Form NEPA Review Routing Form A ::opy of I \ I I ..... Forwarded Forwarded To Date i-t l.tlbrub ~ r:H:.. ~rrr

489

Testing user form | OpenEI Community  

Open Energy Info (EERE)

Testing user form Testing user form Home > Groups > Databus Testing notification of group Q&A Submitted by Prusso on 26 June, 2013 - 06:25 2 answers Points: 0 You may need to edit your profile notification settings. I see that both Prusso and Deanhiller have group subscriptions set up, but I am not certain that they are configured correctly. I enabled more content by group notifications in the notification settings, I don't think this was correctly passing all selected content types even though that value was the default. I also enabled notifications for individual types and tested on my profile. The appropriate content types are now appearing in my subscription list, so I suggest that you re-visit notification settings and add a new subscription- MY ACCOUNT --> NOTIFICATION SETTINGS --> ADD SUBSCRIPTION -->

490

Fermilab | Science Next Door | Subscription Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Facebook row spacer Twitter row spacer YouTube row spacer Subscribe | Fermilab Home row spacer row spacer row spacer Subscribe to Science Next Door If you would like to receive Science Next Door, Fermilab's monthly email community newsletter, please fill in the form below. If you are already receiving Science Next Door and you would like to unsubscribe, you may use the same form. If you have questions, please email fermilab@fnal.gov. Please select: Subscribe to Science Next Door Unsubscribe from Science Next Door Email address: Name (First Last): Send Reset row spacer row spacer row spacer Fermi National Accelerator Laboratory Fermi National Accelerator Laboratory Office of Science / U.S. Department of Energy Managed by Fermi Research Alliance, LLC

491

First Name Last Name EMPLOYEE INFORMATION FORM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

First Name First Name Last Name EMPLOYEE INFORMATION FORM Date of Birth SSN Married Not Married Male Female Current Home Address Line 1 Current Home Address Line 2 City State Zip Zip+4 Home Phone Number Department/Agency Operating Administration Office Position Title Grade Work Address Line 1 Work Address Line 2 City State Zip Zip+4 Office Phone Number Affidavit Date Appointment Date Apartment # Middle Name Use as Beneficiary Yes No U.S. Department of Energy 1000 Independence Ave. SW Washington DC 20585 STANDARD FORM 144 (Rev. 10/95) Page 2 Office of Personnel Management The Guide to Processing Personnel Actions STATEMENT OF PRIOR FEDERAL SERVICE To be Completed by Employee NSN 7540-00-634-4101 Previous Edition Usable 144-114 1. Name (Last, First, Middle Initial) 2. Social Security Number 3. Date of Birth (Month, Day, Year)

492

Employee Assistance Self-ID Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Request for Assistance During an Emergency Request for Assistance During an Emergency Employee Self Identification This form is to be used by persons who expect that they will need assistance during an emergency. The purpose of this form is to help Program Office supervisors and the Incident Management Team ensure that plans are in place to assist persons with temporary or permanent disabilities during an emergency. The Incident Management Team would rather work with someone on a specific plan of action before an emergency than have an individual experience a problem in the middle of an emergency. Note: There are many conditions which might require assistance during an emergency. Conditions can be temporary (e.g., a broken leg, on chemotherapy drugs, or pregnancy) or permanent (e.g., a hearing loss, an amputated limb,

493

Testing user form | OpenEI Community  

Open Energy Info (EERE)

Testing user form Testing user form Home > Groups > Databus Testing notification of group Q&A Submitted by Prusso on 26 June, 2013 - 06:25 2 answers Points: 0 You may need to edit your profile notification settings. I see that both Prusso and Deanhiller have group subscriptions set up, but I am not certain that they are configured correctly. I enabled more content by group notifications in the notification settings, I don't think this was correctly passing all selected content types even though that value was the default. I also enabled notifications for individual types and tested on my profile. The appropriate content types are now appearing in my subscription list, so I suggest that you re-visit notification settings and add a new subscription- MY ACCOUNT --> NOTIFICATION SETTINGS --> ADD SUBSCRIPTION -->

494

Testing user form | OpenEI Community  

Open Energy Info (EERE)

Testing user form Testing user form Home > Groups > Databus Testing notification of group Q&A Submitted by Prusso on 26 June, 2013 - 06:25 2 answers Points: 0 You may need to edit your profile notification settings. I see that both Prusso and Deanhiller have group subscriptions set up, but I am not certain that they are configured correctly. I enabled more content by group notifications in the notification settings, I don't think this was correctly passing all selected content types even though that value was the default. I also enabled notifications for individual types and tested on my profile. The appropriate content types are now appearing in my subscription list, so I suggest that you re-visit notification settings and add a new subscription- MY ACCOUNT --> NOTIFICATION SETTINGS --> ADD SUBSCRIPTION -->

495

PARS II Change Request (CR) Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Title: Phone #: Office/Symbol: Email: CHANGE TYPE: Defect: New Requirement: PRIORITY: PARS II Change Request Form (APR 2011) PARS II Change Request (CR) Form 1 = Prevents the accomplishment of an essential PARS-II capability 3 = Adversely affects the accomplishment of an essential PARS-II capability, but a work-around solution is known 4 = Results in User / Operator inconvenience or annoyance, but does not affect an essential PARS-II capability 5 = Any other effect 1) Detailed description of problem/need. (If possible, provide project #(s) you are working with). PROBLEM/CHANGE DESCRIPTION: 2) Where in system defect is seen or where new functionality is required (i.e., which screen, which report). Screenshots (as separate attachments) are helpful.

496

Steam-channel-expanding steam form drive  

SciTech Connect

In a viscous oil reservoir in which the stratification of the rock permeability is insufficient to confine steam within the most permeable strata, oil can be produced by forming and expanding a steam channel through which steam is flowed and oil is produced. Steam is injected and fluid is produced at rates causing a steam channel to be extended between locations that are horizontally separated. A foam-forming mixture of steam, noncondensable gas and surfactant is then injected into the steam channel to provide foam and a relatively high pressure gradient within the channel, without plugging the channel. A flow of steam-containing fluid through the steam channel is continued in a manner such that the magnitudes of the pressure gradient, the rate of oil production, and the rate of steam channel expansion exceed those which could be provided by steam alone. 10 claims, 6 figures.

Dilgren, R.E.; Hirasaki, G.J.; Hill, H.J.; Whitten, D.G.

1978-05-02T23:59:59.000Z

497

Conductor assembly formed about a curved axis  

DOE Patents (OSTI)

A conductor assembly of the type which, when conducting current, generates a magnetic field or in which, in the presence of a changing magnetic field, a voltage is induced. In the assembly a first layer, tubular in shape, is formed about an axis. The axis includes a curved portion along which a conductor may be positioned to define a first conductor path. The first layer also includes a curved portion having a shape that includes a curve extending along the curved portion of the axis. A first conductor is arranged about the curved portion of the first layer in a first helical configuration including a curved segment, helical in shape and formed about the curved portion of the axis. The configuration is capable of sustaining a magnetic field having multipole components oriented in directions transverse to the axis.

Meinke, Rainer (Melbourne, FL)

2011-02-15T23:59:59.000Z

498

Continuous spray forming of functionally gradient materials  

SciTech Connect

Researchers at Plasma Processes Inc. have produced a Functional Gradient Material (FGM) through advanced vacuum plasma spray processing for high heat flux applications. Outlined in this paper are the manufacturing methods used to develop a four component functional gradient material of copper, tungsten, boron, and boron nitride. The FGM was formed with continuous gradients and integral cooling channels eliminating bondlines and providing direct heat transfer from the high temperature exposed surface to a cooling medium. Metallurgical and x-ray diffraction analyses of the materials formed through innovative VPS (vacuum plasma spray) processing are also presented. Applications for this functional gradient structural material range from fusion reactor plasma facing components to missile nose cones to boilers.

McKechnie, T.N.; Richardson, E.H.

1995-12-01T23:59:59.000Z

499

Spray forming polymer membranes, coatings and films  

SciTech Connect

A method of forming a polymer film having controlled physical and chemical characteristics, wherein a plume of nebulized droplets of a polymer or polymer precursor is directed toward a substrate from a converging/diverging nozzle having a throat at which the polymer or a precursor thereof is introduced and an exit from which the nebulized droplets of the polymer or precursor thereof leave entrained in a carrier gas. Relative movement between the nozzle and the substrate is provided to form a polymer film. Physical and chemical characteristics can be controlled by varying the deposition parameters and the gas and liquid chemistries. Semipermeable membranes of polyphosphazene films are disclosed, as are a variety of other polymer systems, both porous and non-porous.

McHugh, Kevin M. (Idaho Falls, ID); Watson, Lloyd D. (Rigby, ID); McAtee, Richard E. (Idaho Falls, ID); Ploger, Scott A. (Rigby, ID)

1993-01-01T23:59:59.000Z

500

WeldingFabr&MetalForm  

NLE Websites -- All DOE Office Websites (Extended Search)

Welding, Welding, Fabrication, and Metal Forming Manufacturing Technologies The department consists of three trades: weld- ing; fabrication and assembly; and precision metal forming. These interrelated groups use similar equipment and rely on each other's skills. One stop will get you the service of three reliable trades. The team manufactures and assembles proto- type hardware and has the in-house capability of producing hardware with sizes ranging from thumbnail to rail-car. Expertise includes aircraft quality sheet metal construction, certified weld- ing, and assembly. The staff has experience managing a variety of activities: design modifi- cation assistance; in-house fabrication; and project management and can work with your engineers to transform sketches and ideas into working prototypes.