Powered by Deep Web Technologies
Note: This page contains sample records for the topic "form eia-860m year" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Form EIA-860M MONTHLY UPDATE TO ANNUAL ELECTRIC GENERATOR REPORT  

U.S. Energy Information Administration (EIA) Indexed Site

INSTRUCTIONS INSTRUCTIONS Year: 2013 No. 1905-0129 Approval Expires: 12/31/2015 Burden: 0.3 Hours PURPOSE Form EIA-860M collects data on the status of: a) Proposed new generators scheduled to begin commercial operation within the subsequent 12 months; b) Existing generators scheduled to retire from service within the subsequent 12 months; and c) Existing generators that have proposed modifications that are scheduled for completion within one month. The data collected on this form appear in the EIA publication Electric Power Monthly. They are also used to monitor the current status and trends of the electric power industry and to evaluate the future of the industry. REQUIRED RESPONDENTS Respondents to the Form EIA-860M who are required to complete this form are all Form EIA-860,

2

FORM EIA-860M MONTHLY UPDATE TO ANNUAL ELECTRIC GENERATOR REPORT  

U.S. Energy Information Administration (EIA) Indexed Site

PURPOSE Form EIA-860M collects data on the status of: a) Proposed new generators scheduled to begin commercial operation within the subsequent 12 months; b) Existing generators scheduled to retire from service within the subsequent 12 months; and c) Existing generators that have proposed modifications that are scheduled for completion within one month. The data collected on this form appear in the EIA publication Electric Power Monthly. They are also used to monitor the current status and trends of the electric power industry and to evaluate the future of the industry. REQUIRED RESPONDENTS Respondents to the Form EIA-860M who are required to complete this form are all Form EIA-860, ANNUAL ELECTRIC GENERATOR REPORT, respondents who have indicated in a previous filing to

3

Form EIA-860M MONTHLY UPDATE TO ANNUAL ELECTRIC GENERATOR REPORT  

U.S. Energy Information Administration (EIA) Indexed Site

Year: 2013 Year: 2013 OMB No. 1905-0129 Approval Expires: 12/31/2015 Burden: 0.3 Hours NOTICE: This report is mandatory under the Federal Energy Administration Act of 1974 (Public Law 93-275). Failure to comply may result in criminal fines, civil penalties and other sanctions as provided by law. For further information concerning sanctions and disclosure information, see the provisions stated on the last page of the instructions. Title 18 USC 1001 makes it a criminal offense for any person knowingly and willingly to make to any Agency or Department of the United States any false, fictitious, or fraudulent statements as to any matter within its jurisdiction. SCHEDULE 1. IDENTIFICATION Survey Contact Name:__________________________________________ Title:___________________________________________

4

FORM EIA-860M MONTHLY UPDATE TO ANNUAL ELECTRIC GENERATOR REPORT  

U.S. Energy Information Administration (EIA) Indexed Site

NOTICE: This report is mandatory under the Federal Energy Administration Act of 1974 (Public Law 93-275). Failure to comply may result in criminal fines, civil penalties and other sanctions as provided by law. For further information concerning sanctions and disclosure information, see the provisions stated on the last page of the instructions. Title 18 USC 1001 makes it a criminal offense for any person knowingly and willingly to make to any Agency or Department of the United States any false, fictitious, or fraudulent statements as to any matter within its jurisdiction. SCHEDULE 1. IDENTIFICATION Survey Contact Name:__________________________________________ Title:___________________________________________ Address:__________________________________________________________________________________________

5

EIA Electric Power Forms  

Gasoline and Diesel Fuel Update (EIA)

Electric Power Forms Electric Power Forms EIA Electric Power Forms Listing of Publicly Available and Confidential Data EIA's statistical surveys encompass each significant electric supply and demand activity in the United States. Most of the electric power survey forms resulting data elements are published, but respondent confidentiality is required. The chart below shows the data elements for each survey form and how each data element is treated in regard to confidentiality. Data Categories Data collection forms EIA- 411 EIA- 826 EIA- 860 EIA- 860M EIA- 861 EIA- 923 Frame Information Utility identification and iocation -- -- -- -- X -- Plant identification and iocation -- -- -- X -- X Generation and fuel Latitude and longitude -- -- X -- -- --

6

2014 Electricity Form Proposals  

U.S. Energy Information Administration (EIA) Indexed Site

Electricity and Renewable (Photovoltaic) Survey Form Changes Proposed for Electricity and Renewable (Photovoltaic) Survey Form Changes Proposed for 2014 The U.S. Energy Information Administration (EIA) is proposing changes to its electricity data collection in 2014. These changes involve the following surveys: Form EIA-63B, "Annual Photovoltaic Cell/Module Shipments Report," Form EIA-411, "Coordinated Bulk Power Supply Program Report," Form EIA-826, "Monthly Electric Utility Sales and Revenue Report with State Distributions," Form EIA-860, "Annual Electric Generator Report," Form EIA-860M, "Monthly Update to the Annual Electric Generator Report," Form EIA-861, "Annual Electric Power Industry Report," Form EIA-861S, "Annual Electric Power Industry Report (Short Form)," and

7

Most electric generating capacity additions in the last decade ...  

U.S. Energy Information Administration (EIA)

Sources: U.S. Energy Information Administration, Form EIA-860 Annual Electric Generator Report, and Form EIA-860M (see Table ES3 in the March 2011 ...

8

MONTHLY UPDATE TO ANNUAL ELECTRIC GENERATOR REPORT  

U.S. Energy Information Administration (EIA) Indexed Site

REPORT REPORT INSTRUCTIONS|Year: 2013 No. 1905-0129 Approval Expires: 12/31/2015 Burden: 0.3 Hours| |PURPOSE|Form EIA-860M collects data on the status of: Proposed new generators scheduled to begin commercial operation within the subsequent 12 months; Existing generators scheduled to retire from service within the subsequent 12 months; and Existing generators that have proposed modifications that are scheduled for completion within one month. The data collected on this form appear in the EIA publication Electric Power Monthly. They are also used to monitor the current status and trends of the electric power industry and to evaluate the future of the industry.| |REQUIRED RESPONDENTS|Respondents to the Form EIA-860M who are required to complete this form are all Form EIA-860, ANNUAL ELECTRIC GENERATOR REPORT,

9

Hydropower has a long history in the United States - Today in ...  

U.S. Energy Information Administration (EIA)

Source: U.S. Energy Information Administration, Form EIA-860 Annual Electric Generator Report, and Form EIA-860M (see Table ES3 in the March 2011 Electric Power Monthly

10

Proposal Budget Form for(Project Number), Year 1  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

,,,"Year 1",,,"Year 2","Cummulative" "Budget Category (add categories if needed)",,,"Total",,,"Total","Total" "Labor (# hrs/hourly rate required) by job category","# hrs","$ / hr",,"# hrs","$ / hr" " Faculty" " Name" " Name" " Name " " Post Doc " " Grad Student " " Undergrad" " Other Professional " "Fringe Benefit Cost and %" " PI/Faculty, %" " Post Docs, %" " Graduate Students, %" " Undergraduate Students, %" " Other Professional, %" "Travel (designate if travel to INL)"

11

Microsoft Word - NRECA Comments to EIA 5-6-13.docx  

Gasoline and Diesel Fuel Update (EIA)

Ms. Rebecca Peterson U.S. Department of Energy U.S. Energy Information Administration Mail Stop EI-23 Forrestal Building 1000 Independence Ave., SW Washington, DC 20585 Submitted via e-mail to: ERS2014@eia.gov Re: EIA Reporting Proposal Dear Ms. Peterson: On March 6, 2013, the Energy Information Administration ("EIA") requested comments on the proposed three-year reauthorization of forms EIA-63B, EIA-411, EIA-826, EIA-860, EIA-860M, EIA-861, EIA-861S, and EIA-923, and the creation of form EIA-930. 1 This letter provides the comments of the National Rural Electric Cooperative Association ("NRECA") on the EIA's proposal. NRECA is the not-for-profit, national service organization representing 905 rural electric

12

Ms. Rebecca Peterson Energy Information Administration  

Gasoline and Diesel Fuel Update (EIA)

Ms. Rebecca Peterson Ms. Rebecca Peterson Energy Information Administration Submitted by email: ERS2014@eia.gov Dear Ms. Peterson: This is to comment on the Energy Information Administration's (EIA) solicitation of comments on the proposed three-year reauthorization of forms EIA-63B, EIA-411, EIA-826, EIA-860, EIA-860M, EIA-861, EIA-861S, and EIA-923, and the creation of form EIA-930. These comments are in response to the notice published in Vol. 78, No. 44 of the Federal Register on March 6, 2013. Omaha Public Power District (OPPD) is a customer-owned electric utility and political subdivision of the state of Nebraska. OPPD is currently a balancing authority and owns a transmission system and

13

Microsoft Word - SS Part A ERUS 2014 12 17 13.docx  

Gasoline and Diesel Fuel Update (EIA)

Supporting Statement for Survey Clearance: Supporting Statement for Survey Clearance: Electric Power & Renewable Electricity Surveys Part A: Justification Assistant Administrator for Energy Statistics | Office of Electricity, Renewables & Uranium Statistics OMB Number 1905-0129 Independent Statistics & Analysis www.eia.gov U.S. Department of Energy Washington, DC 20585 FORM EIA-63B, Annual Photovoltaic Cell/Module Shipments Report FORM EIA-411, Coordinated Bulk Power Supply Program Report FORM EIA-826, Monthly Electric Utility Sales and Revenue Report with State Distributions FORM EIA-860, Annual Electric Generator Report FORM EIA-860M, Monthly Update to the Annual Electric Generator Report FORM EIA-861, Annual Electric

14

ON THE LAST 10 BILLION YEARS OF STELLAR MASS GROWTH IN STAR-FORMING GALAXIES  

SciTech Connect

The star formation rate-stellar mass relation (SFR-M{sub *}) and its evolution (i.e., the SFR main sequence) describe the growth rate of galaxies of a given stellar mass and at a given redshift. Assuming that present-day star-forming galaxies (SFGs) were always star forming in the past, these growth rate observations can be integrated to calculate average star formation histories (SFHs). Using this Main Sequence Integration (MSI) approach, we trace present-day massive SFGs back to when they were 10%-20% of their current stellar mass. The integration is robust throughout those epochs: the SFR data underpinning our calculations are consistent with the evolution of stellar mass density in this regime. Analytic approximations to these SFHs are provided. Integration-based results reaffirm previous suggestions that current SFGs formed virtually all of their stellar mass at z < 2. It follows that massive galaxies observed at z > 2 are not the typical progenitors of SFGs today. We also check MSI-based SFHs against those inferred from analysis of the fossil record-from spectral energy distributions (SEDs) of SFGs in the Sloan Digital Sky Survey and color-magnitude diagrams (CMDs) of resolved stars in dwarf irregular galaxies. Once stellar population age uncertainties are accounted for, the main sequence is in excellent agreement with SED-based SFHs (from VESPA). Extrapolating SFR main sequence observations to dwarf galaxies, we find differences between MSI results and SFHs from CMD analysis of Advanced Camera for Surveys Nearby Galaxy Survey Treasury and Local Group galaxies. Resolved dwarfs appear to grow much slower than main sequence trends imply, and also slower than slightly higher mass SED-analyzed galaxies. This difference may signal problems with SFH determinations, but it may also signal a shift in star formation trends at the lowest stellar masses.

Leitner, Samuel N. [Department of Astronomy and Astrophysics, University of Chicago, Chicago, IL 60637 (United States)

2012-02-01T23:59:59.000Z

15

YEAR  

National Nuclear Security Administration (NNSA)

1 1 YEAR 2011 Males 18 Females 23 YEAR 2011 SES 2 EJ/EK 2 NQ (Prof/Tech/Admin) 35 NU (Tech/Admin Support) 2 YEAR 2011 American Indian Male 1 American Indian Female 2 African American Male 3 African American Female 9 Asian Male 0 Asian Female 0 Hispanic Male 2 Hispanic Female 6 White Male 12 White Female 6 DIVERSITY Workforce Diversity Associate Administrator for Information Management & Chief Information Officer, NA-IM As of Sep 24, 2011 PAY PLAN TOTAL WORKFORCE GENDER 18 43.9% 23 56.1% Gender Males Females 4.9% 4.9% 85.4% 4.9% Pay Plan SES EJ/EK NQ (Prof/Tech/Admin) NU (Tech/Admin Support) 2.4% 4.9% 7.3% 22.0% 0.0% 0.0% 4.9% 14.6% 29.3% 14.6% Race and Gender American Indian Male American Indian Female African American Male African American Female Asian Male Asian Female Hispanic Male

16

YEAR  

National Nuclear Security Administration (NNSA)

4 4 YEAR 2011 Males 21 Females 23 YEAR 2011 SES 3 EJ/EK 1 EN 03 1 NN (Engineering) 3 NQ (Prof/Tech/Admin) 31 NU (Tech/Admin Support) 5 YEAR 2011 American Indian Male 0 American Indian Female 0 African American Male 1 African American Female 2 Asian Male 1 Asian Female 1 Hispanic Male 6 Hispanic Female 10 White Male 13 White Female 10 DIVERSITY Workforce Diversity Office of General Counsel, NA-GC As of Sep 24, 2011 PAY PLAN TOTAL WORKFORCE GENDER 21 47.7% 23 52.3% Gender Males Females 6.8% 2.3% 2.3% 6.8% 70.5% 11.4% Pay Plan SES EJ/EK EN 03 NN (Engineering) NQ (Prof/Tech/Admin) NU (Tech/Admin Support) 0.0% 0.0% 2.3% 4.5% 2.3% 2.3% 13.6% 22.7% 29.5% 22.7% Race and Gender American Indian Male American Indian Female African American Male African American Female Asian Male Asian Female Hispanic Male

17

YEAR  

National Nuclear Security Administration (NNSA)

6 6 YEAR 2011 Males 7 Females 9 YEAR 2011 SES 1 NQ (Prof/Tech/Admin) 9 GS 15 2 GS 13 2 GS 12 1 GS 11 1 YEAR 2011 American Indian Male 0 American Indian Female 0 African American Male 1 African American Female 3 Asian Male 1 Asian Female 0 Hispanic Male 1 Hispanic Female 0 White Male 4 White Female 6 DIVERSITY Workforce Diversity Associate Administrator of External Affairs, NA-EA As of Sep 24, 2011 PAY PLAN TOTAL WORKFORCE GENDER 7 43.8% 9 56.3% Gender Males Females 6.3% 56.3% 12.5% 12.5% 6.3% 6.3% Pay Plan SES NQ (Prof/Tech/Admin) GS 15 GS 13 GS 12 GS 11 0.0% 0.0% 6.3% 18.8% 6.3% 0.0% 6.3% 0.0% 25.0% 37.5% Race and Gender American Indian Male American Indian Female African American Male African American Female Asian Male Asian Female Hispanic Male Hispanic Female White Male White Female FY11 Workforce Diversity

18

YEAR  

National Nuclear Security Administration (NNSA)

40 40 YEAR 2011 Males 68 Females 72 YEAR 2011 SES 5 EJ/EK 1 NN (Engineering) 16 NQ (Prof/Tech/Admin) 115 NU (Tech/Admin Support) 3 YEAR 2011 American Indian Male 1 American Indian Female 2 African American Male 3 African American Female 7 Asian Male 4 Asian Female 0 Hispanic Male 25 Hispanic Female 26 White Male 35 White Female 37 DIVERSITY Workforce Diversity Associate Administrator for Acquistion & Project Management, NA-APM As of Sep 24, 2011 PAY PLAN TOTAL WORKFORCE GENDER 68 48.6% 72 51.4% Gender Males Females 3.6% 0.7% 11.4% 82.1% 2.1% Pay Plan SES EJ/EK NN (Engineering) NQ (Prof/Tech/Admin) NU (Tech/Admin Support) 0.7% 1.4% 2.1% 5.0% 2.9% 0.0% 17.9% 18.6% 25.0% 26.4% Race and Gender American Indian Male American Indian Female African American Male African American Female Asian Male

19

Years  

NLE Websites -- All DOE Office Websites (Extended Search)

and Technology in and Technology in the National Interest 60 Years of Excellence Lawrence Livermore National Laboratory FY 2012 Annual Report About the Cover: Lawrence Livermore National Laboratory (LLNL) engineers Chris Spadaccini (left) and Eric Duoss are shown experimenting with direct ink-writing to create micro- to macroscale structures with extreme precision. The Laboratory is advancing this process and other additive manufacturing technologies to develop new materials with extraordinary properties for use in a wide range of national-security and other applications. About the Laboratory: Lawrence Livermore National Laboratory was founded in 1952 to enhance the security of the United States by advancing nuclear weapons science and technology. With a talented and dedicated workforce and

20

Binding forms of sulphur in an Orthic Luvisol after 45 years of different organic and inorganic fertilization  

E-Print Network (OSTI)

FYM2), 7.25 t and 29 t compost from organic household waste1 year -1 , 10 and 30 t compost h -1 year -1 and 1.67 andof the high amounts of compost and sewage sludge resulted in

Scherer, Heinrich Wilhelm

2009-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "form eia-860m year" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Nuclear waste form risk assessment for US defense waste at Savannah River Plant. Annual report fiscal year 1980  

SciTech Connect

Waste form dissolution studies and preliminary performance analyses were carried out to contribute a part of the data needed for the selection of a waste form for the disposal of Savannah River Plant defense waste in a deep geologic repository. The first portion of this work provides descriptions of the chemical interactions between the waste form and the geologic environment. We reviewed critically the dissolution/leaching data for borosilicate glass and SYNROC. Both chemical kinetic and thermodynamic models were developed to describe the dissolution process of these candidate waste forms so as to establish a fundamental basis for interpretation of experimental data and to provide directions for future experiments. The complementary second portion of this work is an assessment of the impacts of alternate waste forms upon the consequences of disposal in various proposed geological media. Employing systems analysis methodology, we began to evaluate the performance of a generic waste form for the case of a high risk scenario for a bedded salt repository. Results of sensitivity analysis, uncertainty analyses, and sensitivity to uncertainty analysis are presented.

Cheung, H.; Jackson, D.D.; Revelli, M.A.

1981-07-01T23:59:59.000Z

22

Five-Year Implementation Plan For Advanced Separations and Waste Forms Capabilities at the Idaho National Laboratory (FY 2011 to FY 2015)  

SciTech Connect

DOE-NE separations research is focused today on developing a science-based understanding that builds on historical research and focuses on combining a fundamental understanding of separations and waste forms processes with small-scale experimentation coupled with modeling and simulation. The result of this approach is the development of a predictive capability that supports evaluation of separations and waste forms technologies. The specific suite of technologies explored will depend on and must be integrated with the fuel development effort, as well as an understanding of potential waste form requirements. This five-year implementation plan lays out the specific near-term tactical investments in people, equipment and facilities, and customer capture efforts that will be required over the next five years to quickly and safely bring on line the capabilities needed to support the science-based goals and objectives of INLs Advanced Separations and Waste Forms RD&D Capabilities Strategic Plan.

Not Listed

2011-03-01T23:59:59.000Z

23

Proposal Budget Form for(Project Number), Year 1",,,," (May 01)",,,,"  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

,,,," (May 01)",,,," (May 01)",,,," (May 01)" ,,,," (May 01)",,,," (May 01)",,,," (May 01)" ,,,,"Year 1",,,,"Year 2",,,,"Year 3","Cummulative" "Budget Category (add categories if needed)",,,,"Total",,,,"Total",,,,"Total","Total" "Labor (# hrs/hourly rate required) by job category","# hrs","$ / hr",,,"# hrs","$ / hr",,,"# hrs","$ / hr" " PI (Name; INCLUDE CV FOR EACH degreed person",96.5,50,,4825,96.5,50,,4825,96.5,50,,4825,14475 " Faculty",,,,0,,,,0,,,,0,0 " Name",,,,0,,,,0,,,,0,0 " Name",,,,0,,,,0,,,,0,0 " Name ",45,25,,1125,45,25,,1125,45,25,,1125,3375

24

Measured leak rates of the temporary seals in DWPF canistered waste forms after three years of on site storage  

SciTech Connect

In the summer of 1990 a study was carried out to determine the-internal pressure, relative humidity, and chemical composition of the gas within the free volume of four canistered waste forms produced at TNX in May of 1988. Three of these canistered waste forms were sealed only by temporary seals and subsequently stored in the TNX boneyard' with no protection. The fourth canister was sealed by upset resistance welding. All three canisters with temporary seals were decontaminated by aqueous frit blasting. It was important to remeasure the leak rates of these seals to ensure that leaktightness had not deteriorated during canister handling and storage prior to the time the experiment were performed. This paper details the results of two separate measurements of the leak rates of these seals.

Harbour, J.R.; Miller, T.J.

1992-04-06T23:59:59.000Z

25

Measured leak rates of the temporary seals in DWPF canistered waste forms after three years of on site storage  

SciTech Connect

In the summer of 1990 a study was carried out to determine the-internal pressure, relative humidity, and chemical composition of the gas within the free volume of four canistered waste forms produced at TNX in May of 1988. Three of these canistered waste forms were sealed only by temporary seals and subsequently stored in the TNX `boneyard` with no protection. The fourth canister was sealed by upset resistance welding. All three canisters with temporary seals were decontaminated by aqueous frit blasting. It was important to remeasure the leak rates of these seals to ensure that leaktightness had not deteriorated during canister handling and storage prior to the time the experiment were performed. This paper details the results of two separate measurements of the leak rates of these seals.

Harbour, J.R.; Miller, T.J.

1992-04-06T23:59:59.000Z

26

NOTE: Autoclave Waste Treatment Testing Records are to be kept three (3) years SWFHCRF Form for review by the Texas Commission on Environmental Quality at any time.  

E-Print Network (OSTI)

NOTE: Autoclave Waste Treatment Testing Records are to be kept three (3) years SWFHCRF Form: ______________ =================================================================================================== · Microbiological Waste: For a definition of microbiological waste, refer to The University's Procedures for Disposal of Hazardous Waste, available at www.utexas.edu/safety/ehs/disposal/hazwaste/toc.html · Weight

27

Draft ERUS 2014 OMB Supporting Statement, Part B  

Gasoline and Diesel Fuel Update (EIA)

NUMBER 1905-0129 SUPPORTING STATEMENT, PART B NUMBER 1905-0129 SUPPORTING STATEMENT, PART B i Supporting Statement for Survey Clearance: Electric Power and Renewable Surveys Part B: Collection of Information Employing Statistical Methods Assistant Administrator for Energy Statistics | Office of Electricity, Renewables & Uranium Statistics OMB Number 1905-0129 Independent Statistics & Analysis www.eia.gov U.S. Department of Energy Washington, DC 20585 FORM EIA-63B, Annual Photovoltaic Cell/Module Shipments Report FORM EIA-411, Coordinated Bulk Power Supply Program Report FORM EIA-826, Monthly Electric Utility Sales and Revenue Report with State Distributions FORM EIA-860, Annual Electric Generator Report FORM EIA-860M, Monthly Update to the Annual Electric Generator Report

28

Ventyx, an ABB Company  

Gasoline and Diesel Fuel Update (EIA)

Ventyx, an ABB Company Ventyx, an ABB Company 1495 Canyon Blvd Suite 100 Boulder, CO 80302 (t) 720.240.5500 www.ventyx.com April 30, 2013 Ms. Rebecca Peterson U.S Department of Energy, U.S. Energy Information Administration, Mail Stop EI-23, Forrestal Building, 1000 Independence Avenue SW., Washington, DC 20585 Re: Proposed changes to Energy Information Administration Forms EIA-63B, EIA-411, EIA-826, EIA-860, EIA-860M, EIA-861, EIA-861S, and EIA-923. Federal Register Vol. 78 No. 44, Wednesday March 6, 2013. Dear Ms. Peterson: We appreciate the time and effort the Energy Information Administration spends collecting, maintaining and distributing industry wide data. The data found in EIA forms 923, 860, 860M, 861 and 826 is the industry standard and used by market analysts and

29

EEOC FORM  

National Nuclear Security Administration (NNSA)

U.S. Department of Energy U.S. Department of Energy National Nuclear Security Administration Management Directive-715 Fiscal Year 2012 DOE NNSA February 4, 2013 i National Nuclear Security Administration U.S. Department of Energy ANNUAL EEO PROGRAM STATUS REPORT EEO PLAN TO ATTAIN THE ESSENTIAL ELEMENTS OF A MODEL EEO PROGRAM Table of Contents Page FORM 715-01 Part A Department or Agency Identifying Information......................1 FORM 715-01 Part B Total Employment....................................................................1 FORM 715-01 Part C Agency Official(s) Responsible for oversight of EEO Program(s)................................................................................................................1

30

APPENDIX A: Forms and Instructions Form Form R93D-44 Form R93D-03  

U.S. Energy Information Administration (EIA) Indexed Site

APPENDIX A: Forms and Instructions APPENDIX A: Forms and Instructions Form Form R93D-44 Form R93D-03 Form R93D-59 Instructions Form RT94-02 Form RT94-04 Form RT94-0! Form RT94-03 Form RT94-05 Form RT94-06 Instructions Form RT94-09 Instructions Form RT94-10 Form RT94-07 Form RT94-08 Form RT94-17 Form RT94-19 Form RT94-24 Form RT94-15 Form RT94-13 Form RT94-22 Form RT94-26 Form RT94-18 Form RT94-20 FormRT94-16 Form RT94-14 Form RT94-21 Form RT94-25 FormRT94-ll Form RT94-12 Form RT94-23 Form RT94-27 Section N (Vehicles) of 1993 RECS Questionnaire ............. Cover Letter for VIN Follow-up ........................... Vehicle Information Card (yellow, front only) ................. 1993 RECS Mail Questionnaire, Pages 4-5 (vehicle pages only) .... Instructions for Assembling RTECS Mid-Year Mailings ..........

31

2013 Form W-4  

NLE Websites -- All DOE Office Websites (Extended Search)

Form W-4 (2013) Purpose. Complete Form W-4 so that your employer can withhold the correct federal income tax from your pay. Consider completing a new Form W-4 each year and when...

32

Glass Waste Forms for Oak Ridge Tank Wastes: Fiscal Year 1998 Report for Task Plan SR-16WT-31, Task B  

SciTech Connect

Using ORNL information on the characterization of the tank waste sludges, SRTC performed extensive bench-scale vitrification studies using simulants. Several glass systems were tested to ensure the optimum glass composition (based on the glass liquidus temperature, viscosity and durability) is determined. This optimum composition will balance waste loading, melt temperature, waste form performance and disposal requirements. By optimizing the glass composition, a cost savings can be realized during vitrification of the waste. The preferred glass formulation was selected from the bench-scale studies and recommended to ORNL for further testing with samples of actual OR waste tank sludges.

Andrews, M.K.

1999-05-10T23:59:59.000Z

33

FORM EIA-28  

U.S. Energy Information Administration (EIA) Indexed Site

FORM EIA-28 - Financial Reporting System FORM EIA-28 - Financial Reporting System Sch 5111 Sch 5110 EIA-28 Financial Reporting System Sch 5100 -- Page 1 of 1 2010 Reporting Year January 2011 Instructions i Contents Updates to Instructions for Reporting Year 2009 ....................................................................................................................ii I. General Instructions ................................................................................................................................................................ 1 A. Purpose and Legislative Authority..................................................................................................................................... 1 B. Filing Requirements...........................................................................................................................................................

34

Retirement Plaque Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Retirement Plaque Request Form Retirement Plaque Request Form Fill out a separate form for each plaque requested. Allow two weeks for delivery. If you have any questions, please call Rudy Bartolo, Retirement Plaque Coordinator at ext. 5558. FORM MUST BE SUBMITTED (mailed or faxed) in order for work to commence. Return form to Retirement Plaque Coordinator, Mailstop 77R0125, or fax 4993. Please Print Clearly Requester's Name:_______________________________ Extension:_______________ Mail Stop: ________________ Today's date:__________________ With Frame _____ Without Frame_____ Date Needed: ________________________ Full name as it is to appear on plaque:_________________________________________ Number of years employed at Lab:______________ Beginning and ending dates of employment: ____________________________________

35

ARM - Forms  

NLE Websites -- All DOE Office Websites (Extended Search)

ARMForms About Become a User Recovery Act Mission FAQ History Organization Participants Facility Statistics Forms Contacts Facility Documents ARM Management Plan (PDF, 335KB) Field...

36

order form  

NLE Websites -- All DOE Office Websites (Extended Search)

Customer Order Form Customer Order Form Fermilab Education Office - Customer Order Form PO BOX 500, MS 777, Batavia, IL 60510 * ph. 630-840-8258 * fax 630-840-2500 * avarry@fnal.gov Date: This order be: SHIPPED PICKED UP? Bill to: Ship to: Contact/Institution name: Email: Phone: Fax: Payment method (please circle): Visa/MasterCard - Check - Purchase Order  Visa/MasterCard # P.O. # Exp Date: Quantity Ordered Item Name Item Description (color, size, etc.) Price Each Total Amount  For purchases over $200 only *IL residents ONLY: Add 7.5% sales tax to your order.

37

Sponsorship Form  

Science Conference Proceedings (OSTI)

May 20, 2007 ... Conference Banquet. $5,000. Signage, napkins. (limit 4 sponsors). Mail or fax this form to: TMS c/o Arlene Frances. Phone: (724) 776-9000, ext.

38

Form Approved  

U.S. Energy Information Administration (EIA) Indexed Site

DISCLOSURE OF INFORMATION: The items RESPONDENT IDENTIFICATION Company Name and OTHER PARTY NAME (Item 1.A.), and SELLER'S NAME (Item 3.B.) on Form EIA-858 are DISCLOSURE OF INFORMATION: The items RESPONDENT IDENTIFICATION Company Name and OTHER PARTY NAME (Item 1.A.), and SELLER'S NAME (Item 3.B.) on Form EIA-858 are NOT considered confidential and may be publicly released in identifiable form. All other information you provide will be used for statistical purposes only. In accordance with the Confidential Information Protection provisions of Title V, Subtitle A of Public Law 107-347 and other applicable Federal laws, your responses will be kept confidential and will not be disclosed in identifiable form to anyone other than employees or agents without your consent. By law, every EIA employee, as well as every agent, is subject to a jail term, a fine of up to $250,000, or both if he or she discloses ANY identifiable information about you.

39

Registration Form  

NLE Websites -- All DOE Office Websites (Extended Search)

SNAP COLLABORATION MEETING JUNE 1 - 3, 2006 REGISTRATION FORM To register, please fill out the registration form below and click on the "SEND" button. Your registration will allow us to make security access and hospitality arrangements for you. Deadline: Please register NLT Wednesday, May 24, 2006. 1. Your Name (Last, First): 2. Your Institution: 3. Email address: 4. Citizenship (for non-DOE employees/guests): 5. Arrival date: 6. Departure Date: 7. Will you be attending the working dinner on Thursday, June 1? Yes No 8. Any dietary restrictions? Please click on the "Send" button below to email this form automatically to snap@lbl.gov. An automatic email reply receipt confirmation will be sent back to your email address. Send Reset Thank you!

40

Form1  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

B. U.S. DEPARTMENT OF ENERGY FORM 3304.2, B. U.S. DEPARTMENT OF ENERGY FORM 3304.2, APPROVAL OF EXPERT OR CONSULTANT EMPLOYMENT REQUEST U.S.DEPARTMENT OF ENERGY APPROVAL OF EXPERT OR CONSULTANT EMPLOYMENT REQUEST (Continued on Reverse) DOE F 3304.2 (01-07) 1. Name of Expert or Consultant: 2. Organization: 9. Current Employment (position, company, and location): 10. Home Address (city, state, and zip code): 11. Official Worksite (where services are to be performed): 12. APPROVALS 3. Action Requested: 4. Hourly Rate of Pay: 5. Nature of Appointment: 6. Period for Which Services Are Desired: 7. Estimated Number of Days to Be Worked: 8. Number of Days Worked Under Present Appointment: (Extension Only) 13. Description of Services Required: 14. Justification for this Expert/Consultant Action and Qualifications of Candidate Related to Need for Appointment:

Note: This page contains sample records for the topic "form eia-860m year" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Form EIA-871A  

U.S. Energy Information Administration (EIA) Indexed Site

Approval Approval OMB No.: 1905-0145 Expires: 11/30/2002 Form EIA-871A U.S. Department of Energy Commercial Buildings Energy Consumption Survey for 1999 BUILDING QUESTIONNAIRE TABLE OF CONTENTS About This Questionnaire ...................................................................................................... 3 Section A. Building Size and Age Square Footage .................................................................................................... 5 Floors .................................................................................................................... 8 Year Constructed .................................................................................................. 9 Section B. Principal Building Activity

42

Form Approv  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

'JOE I' ':0 'JOE I' ':0 ) e " Flee/romc Form Approv ed by CGIR· 01120195 (8 ./1" United States Government Department of Energy Bonneville Power Administra ion memorandum DATE : uC l J !:' ZD y REPLY TO ATTN OF : KEP-4 SUBJECT: Environmental Clearance Memorandum TO ; Rob Ochs Project Manager - TELM-TPP-3 Proposed Action: Lane-Wendson No.1 Structure 10/5 Access Road Improvement and Pole Replacement Project Budget Information: Work Order # 224549 PP&A Project No.: 1117 Proposed by: Bonneville Power Administration (BPA) Categorical Exclusion Applied (from Sub part 0,10 C.F.R. Part) 021): B 1.3, Routine maintenance activities ... for structures, rights-of-way, infrastructures such as roads, equipment. .. routine maintenance activities, corrective ... .are required to maintain

43

Form Approved  

U.S. Energy Information Administration (EIA) Indexed Site

Approved Approved OMB No. 1905-0092. El A 457B (Expires May 31, 1990.) This survey is voluntary and authorized under the Federal Energy Administration Act of 1974 (Public Law 93-275) as amended. Information about specific households will be kept strictly confidential. The data will be summarized within large groupings for statistical purposes. 1987 Residential Energy Consumption Survey Energy Information Administration U.S. Department of Energy Location # Housing Unit # 111-116 117-118 EIA 457B * 1987 Residential Energy Consumption Survey TIME INTERVIEW STARTED 1. In what year did your family this (house/apartment)? AM PM move into 01 [ ] Before 1940 02 [ ] 1940-1949 03 [ ] 1950-1959

44

Form Approved  

U.S. Energy Information Administration (EIA) Indexed Site

Approved Approved OMB No. 1905-0092 . EIA 4578 (Expire* August 31,1986} Th|« turvey Is voluntary and authorized under (he Federal Energy Administration Act of 1974 (Public La* 93-275) a* amended. Information about *p*clflc houiehold* will t>* kept strictly confidential. The d*la will be summarized within large grouping! for tatlttlcal purposes. Residential Energy Consumption Survey Fall-Winter* 1984-1985 Energy Information Administration U.S. Department of Energy Location ff. Housing UnN *.. 111-116 117-118 TIME INTERVIEW STARTED 1. In what year did your family this (house/apartment)? AM PM move into 01 [] BEFORE 1940 02 [] 1940-1949 03 [] 1950-1959 04 [] 1960-1964 05 [] 1965-1969 06 [] 1970-1974 07 [] 1975-1976 08 [] 1977-1979 09 [] 1980 10 [] 1981 121 11 [] 1982 122

45

Data Capture Form Data capture form  

E-Print Network (OSTI)

Data Capture Form Data capture form Please make use of the data capture form relevant not on the common lists. The data capture form must be printed and used in the field during the census to capture all the data during the BCW. All data captured onto this form must please be submitted by the team

de Villiers, Marienne

46

SSRL29 Abstract Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Users are invited to submit abstracts highlighting research activities conducted over the past year at SSRL for oral or poster presentation at the meeting. Posters will be displayed throughout the meeting and will be highlighted during a poster session and reception on Monday, October 7. Graduate students submitting posters must also register for the Users' Meeting and are eligible for one of the poster prizes. All posters require submission of this form no later than September 23 to guarantee space and inclusion in the program materials. Users are invited to submit abstracts highlighting research activities conducted over the past year at SSRL for oral or poster presentation at the meeting. Posters will be displayed throughout the meeting and will be highlighted during a poster session and reception on Monday, October 7. Graduate students submitting posters must also register for the Users' Meeting and are eligible for one of the poster prizes. All posters require submission of this form no later than September 23 to guarantee space and inclusion in the program materials. Please Note: Fields marked with require entry. General Presentation Information Please select a presentation type: Oral Presentation Poster Presentation Invited Presentation: Users' Meeting Invited Presentation: Workshop Speaker

47

Process Deviation Form  

NLE Websites -- All DOE Office Websites (Extended Search)

3 Process Deviation Form 080822 Page 1 of 3 EOTA - Business Form Document Title: Process Deviation Form Document Number: F-013 Rev. 080822 Document Owner: Elizabeth Sousa Backup...

48

2013 Electricity Form Proposals  

U.S. Energy Information Administration (EIA) Indexed Site

Coal Survey Form Changes 2013 Proposals The U.S. Energy Information Administration (EIA) is proposing to change its data protection policy for the following survey forms: Form...

49

Assessor Forms and Information  

Science Conference Proceedings (OSTI)

Other Forms and Information for Assessors. What's on this page? ... Other Forms and Information. Assessor Biographical Sketch Template, PDF, Word. ...

2013-07-26T23:59:59.000Z

50

Tour Registration Form  

Science Conference Proceedings (OSTI)

Feb 25, 2000 ... Accompanying Persons and Plant Tours. REGISTRATION FORM. PLEASE COMPLETE FORM AND MAIL WITH CHECK TO: Helen L.

51

Form EIA-861S Year: 2013 0129 Burden: .75 Hours  

U.S. Energy Information Administration (EIA)

electric power industry and to evaluate the future of the industry . ... tariff arrangements permit a facility, generating electricity from a renewable resource,

52

Forms | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Forms Forms Forms DOE Forms are developed within the Department, and approved by the DOE Forms Manager. These forms are designed to obtain or provide structured information common to the needs of two or more DOE field or Headquarters organizations. All of the forms here are in Portable Document Format (PDF). Adobe Acrobat(R) Reader is needed to view and print the PDF files. Fillable forms, identified by the "fillable" icon, require a full version of Adobe Acrobat software. DOE Forms Forms by Subject Forms by Number Management & Administration 0000 - 1999 Legal 2000 - 2999 Personnel Management 3000 - 3999 Logistic Management 4000 - 4999 Program Planning & Management 5000 - 5999 HQ Forms HQ Forms are developed or managed by a Headquarters organization, and

53

Forms | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Forms Forms The following interactive Web-based forms in Adobe Acrobat Portable Document Format (PDF) are designed for online completion with Acrobat Reader 3.0 or above. Input...

54

Forms | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

- 3999 Logistic Management 4000 - 4999 Program Planning & Management 5000 - 5999 HQ Forms HQ Forms are developed or managed by a Headquarters organization, and approved by the DOE...

55

LBNL Affiliate Forms - Cyclotron  

NLE Websites -- All DOE Office Websites (Extended Search)

Safety History Links Directions Webmaster User Info > New User Checklist > LBNL Affiliate Forms v.1 LBNLAffiliateForms.pdf (161k) Daphne Trowbridge-Williams,...

56

Tour Registration Form - TMS  

Science Conference Proceedings (OSTI)

Page 1. Tour Registration Form. Tour Registration Form. Please print legibly below: Participant's Full Name. Telephone. Fax. Mobile. E-mail. Method of...

57

Form:SampleForm | Open Energy Information  

Open Energy Info (EERE)

SampleForm Jump to: navigation, search Input the name of a Test Page below. If the resource already exists, you will be able to edit its information. AddEdit a Test Page The text...

58

SRS - Retiree Benefits - Forms  

NLE Websites -- All DOE Office Websites (Extended Search)

Forms Forms Medical Forms Return completed forms to: 5-200 Health Care Programs Enrollment Change Benefits Solutions Service Center Bldg 703-47A, Aiken, SC 29808 5-340 Medical Claim Form Claims Processing Center P.O. Box 100300, Columbia, SC 29202 -- Pharmacy Claim Form Caremark Prescription Drug Claim Processing Center, P.O. Box 52059, Phoenix, AZ 85072-2059 Dental Forms Return completed forms to: 5-200 Health Care Programs Enrollment Change Benefits Solutions Service Center Bldg 703-47A, Aiken, SC 29808 5-342 Dental Claim Form Claims Processing Center P.O. Box 100300, Columbia, SC 29202 Life Insurance Return completed forms to: 5-171 Contributory Group Life Application and Deduction Authorization Benefits Solutions Service Center Bldg 703-47A, Aiken, SC 29808

59

Exercise Evaluation Forms  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Hazardous Materials Hazardous Materials Exercise Evaluation Forms Prepared for the Department of Energy Office of Transportation and Emergency Management 02B00215-09.p65 This page intentionally left blank table of contents Transportation Emergency Preparedness Program (TEPP) planning tools planning tools Hazar Hazar Hazar Hazar Hazardous Materials dous Materials dous Materials dous Materials dous Materials Ex Ex Ex Ex Exer er er er ercise Ev cise Ev cise Ev cise Ev cise Evaluation Forms aluation Forms aluation Forms aluation Forms aluation Forms Objective 1: Initial Notification of Response Agencies and Response Personnel ........................................................ 3 Objective 2: Direction and Control .............................................................. 5 Objective 3: Incident Assessment ................................................................ 6

60

FOIA Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

You are here: DOEID Home > FOIA > FOIA Request Form You are here: DOEID Home > FOIA > FOIA Request Form U.S. Department of Energy Idaho (DOE-ID) Operations Office Electronic FOIA Request Form* To make an Electronic FOIA (E-FOIA) request, please provide the information below. Failure to enter accurate and complete information may render your FOIA request impossible to fulfill. For individuals making a request for personal records under FOIA or the Privacy Act, please fill out the Privacy Act Request Form ( This link opens an 14 kb size Adobe Acrobat File 15 kb), print out the form and have your identity validated by having the form notarized and send the form to DOE-Idaho Privacy Officer, 1955 Freemont Avenue, Mail Stop 1203, Idaho Falls, ID 83405. * Requests submitted under the Privacy Act must be signed and, therefore, cannot be submitted on this form.

Note: This page contains sample records for the topic "form eia-860m year" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Time, energy & form  

E-Print Network (OSTI)

Physical manifestations of time occur in natural forms of all sizes. Architectural form serves as shelter while providing a built envelope of human life, simultaneously influencing and influenced by energetic activities ...

McInnis, Martha Jane

1982-01-01T23:59:59.000Z

62

PMP Tour Form  

Science Conference Proceedings (OSTI)

Tours operate rain or shine. PMP Tour Form. Complete and fax or e-mail this form by November 20 with payment information to: Master Tour Co. Ltd., Thailand.

63

OMB Form 424A  

Science Conference Proceedings (OSTI)

... NOT RETURN YOUR COMPLETED FORM TO THE OFFICE OF MANAGEMENT AND BUDGET. ... In preparing the budget, adhere to any existing ...

2013-06-19T23:59:59.000Z

64

tour registration form  

Science Conference Proceedings (OSTI)

Jan 16, 2002 ... ACCOMPANYING PERSONS TOUR REGISTRATION FORM. 31. 131st Annual Meeting & Exhibition. February 17-21, 2002 Seattle,...

65

Forms of matter and forms of radiation  

E-Print Network (OSTI)

The theory of defects in ordered and ill-ordered media is a well-advanced part of condensed matter physics. Concepts developed in this field also occur in the study of spacetime singularities, namely: i)- the topological theory of quantized defects (Kibble's cosmic strings) and ii)- the Volterra process for continuous defects, used to classify the Poincar\\'e symmetry breakings. We reassess the classification of Minkowski spacetime defects in the same theoretical frame, starting from the conjecture that these defects fall into two classes, as on they relate to massive particles or to radiation. This we justify on the empirical evidence of the Hubble's expansion. We introduce timelike and null congruences of geodesics treated as ordered media, viz. 'm'-crystals of massive particles and 'r'-crystals of massless particles, with parallel 4-momenta in M^4. Classifying their defects (or 'forms') we find (i) 'm'- and 'r'- Volterra continuous line defects and (ii) quantized topologically stable 'r'-defects, these latter forms being of various dimensionalities. Besides these 'perfect' forms, there are 'imperfect' disclinations that bound misorientation walls in three dimensions. We also speculate on the possible relation of these forms with the large-scale structure of the Universe.

Maurice Kleman

2009-05-28T23:59:59.000Z

66

NEO - Forms Checklist  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

/4/2007; please do not use older versions /4/2007; please do not use older versions Office of Human Capital Management U.S. Department of Energy New Employee Orientation FORMS CHECKLIST EOD Date: _________________ Employee Name: ________________________ Organization: ____________________________ HR Specialist: ___________________________ Telephone Number: _______________________ Admin Contact: __________________________ Telephone Number: _______________________ New Employee Orientation Forms to be issued and collected HR Orientation Team: FORM COMPLETE & SIGNED FORM NAME AND NUMBER YES NO Comments 1. Photo ID 2. Passport; Birth Certificate; or U.S. Citizenship documentation 3. Job Offer Letter Bring on 1 st Day 4. Employment & Benefits Forms listed below

67

2013 Electricity Form Proposals  

U.S. Energy Information Administration (EIA) Indexed Site

Electricity Survey Form Changes in 2013 The U.S. Energy Information Administration (EIA) proposed changes to its electricity data collection in 2013. These changes involve three forms: Form EIA-861, "Annual Electric Power Industry Report" The addition of a new form, the Form EIA-861S, "Annual Electric Power Industry Report (Short Form)" Form EIA-923, "Power Plant Operations Report." The proposals were initially announced to the public via a Federal Register Notice published March 15, 2012. Comments regarding this proposed information collection were due by May 14, 2012. EIA reviewed all comments and made several revisions to the proposals as a result. A second Federal Register Notice was published on August 30, 2012. It outlined the proposals

68

Precision Wire Forming  

SciTech Connect

An air-operated semiautomatic wire former was designed and built at Mound Laboratory to form specific types of electrodes to be molded in plastic parts. Use of the semiautomatic wire former eliminates the sliding action of tooling on the surface of the electrode wire to be formed and properly aligns the crimped electrode surfaces to within required tolerance ranges. These are difficulties which are characteristic of conventional wire forming tooling. Interchangeable tooling is provided with the semiautomatic wire former for forming electrode wires in one plane; secondary tooling was designed and bulit for forming electrode wires in two planes; and a special series of tooling was designed for forming more complex wire forms.

Weeks, J. E.; Osborne, J. M.

1970-08-07T23:59:59.000Z

69

Exergy analysis of incremental sheet forming  

E-Print Network (OSTI)

Research in the last 15 years has led to die-less incremental forming processes that are close to realization in an industrial setup. Whereas many studies have been carried out with the intention of investigating technical ...

Dittrich, M. A.

70

Science Brief Submission Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Science Brief Submission Form Science Brief Submission Form Science Brief Submission Form Print Tuesday, 01 May 2007 00:00 Science Brief Guidelines and Submission Form Please fill out the form below to submit a Science Brief and send ONE image (may be a composite of up to four images) from your publication directly to us at alscommunications@lbl.gov. Please note: The image must be high resolution, and, if there is text on the image, it must be scalable. We will let you know as soon as it is posted! * Required Your Name * Your Email Address * Your Affiliation Title of Publication * Link to Publication (if available) Beamline(s) * Journal Citation * Description of Research * 200 word maximum Image Caption * 50 word maximum Submit Never submit passwords through Google Forms. Powered by Google Docs Report Abuse - Terms of Service - Additional Terms

71

Form EIA-767  

U.S. Energy Information Administration (EIA) Indexed Site

Form EIA-767 (2005) STEAM-ELECTRIC PLANT OPERATION AND DESIGN REPORT Form Approved OMB No. 1905-0129 Approval Expires: 11/30/2007 PURPOSE Form EIA-767 collects information annually from all U.S. plants with a total existing or planned organic-fueled or combustible renewable steam-electric unit that has a generator nameplate rating of 10 megawatts or larger. This report is used for economic analyses conducted by the Department of Energy. The data from this form appear in the Electric Power Annual and the Annual Energy Review. The data collected on this form are used to monitor the current status and trends in the electric power industry and to evaluate the future of the industry. REQUIRED RESPONDENTS A Form EIA-767 must be completed and filed for each existing, under-construction, or planned

72

FFSE Online Membership Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Form Form This form is for people who would like to join or renew membership in Fermilab Friends for Science Education. If you would like to donate to FFSE, but not become a member, please go to the Donation Form. If you are a teacher and would like a joint membership in ISTA and FFSE, use the ISTA/FFSE Form. This form functions like a conventional online shopping cart. You add items to the cart with the "Add to Cart" button and may confirm what is in your cart with the "View Cart" button. To add more items when viewing the cart, click "Continue Shopping." You can choose to contribute to any or all of the options. There are three possible items available to put in the cart. You will be directed further to complete the transaction as you check out.

73

Process / CI Form  

NLE Websites -- All DOE Office Websites (Extended Search)

6 Process / Continual Improvement Form 11_0119 Page 1 of 3 6 Process / Continual Improvement Form 11_0119 Page 1 of 3 EOTA - Business Form Document Title: Process / Continual Improvement Form Document Number: F-016 Rev 11_0119 Document Owner: Elizabeth Sousa Backup Owner: David Rocha Approver(s): Melissa Otero Parent Document: P-012, Process / Continual Improvement Notify of Changes: EOTA Employees Referenced Document(s): N/A F-016 Process / Continual Improvement Form 11_0119 Page 2 of 3 Revision History: Rev. Description of Change A Initial Release 08_0425 Corrected minor problems and updated revision number. 11_0119 Merged F-019 Improvement Opportunity Planning Worksheet into this document F-016 Process / Continual Improvement Form 11_0119 Page 3 of 3

74

Fuel Cell Technologies Program Multi-Year Research, Development...  

NLE Websites -- All DOE Office Websites (Extended Search)

Appendix D - Project Evaluation Form Multi-Year Research, Development and Demonstration Plan Page D- 1 DOE Hydrogen Program 2011 Annual Merit Review Project Evaluation Form...

75

Membership form 11  

NLE Websites -- All DOE Office Websites (Extended Search)

Join, renew or donate online at ed.fnal.gov/ffse or use this form. Join, renew or donate online at ed.fnal.gov/ffse or use this form. Fermilab Friends for Science Education Membership Form Membership Levels Director's Club: $1,000.00 Patron: $500.00 Sponsor: $250.00 Dual: $100.00 Regular: $50.00 Teacher: $10.00 Name:_____________________________________________________________________ Partner's Name:_____________________________________________________________ Address:___________________________________________________________________ City, State, Zip:_____________________________________________________________ Telephone:_______________________ E-mail:__________________________

76

Housing Reservation Form  

Science Conference Proceedings (OSTI)

NOTE: PLEASE RETURN THIS FORM BY MAY 31, 2003 to: BY MAIL: Meghan Webb, Conference Services, University of Utah,. 110 S. Ft. Douglas Blvd., Salt...

77

ESIF Project Proposal Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Systems Integration Project Submittal Form Title of Project: Date Submitted: Name of PI at NREL: Name of PI: InstituteEmployer: Phone: Fax: Street Address: City: State: Country:...

78

w: Reglstratlon Form  

Science Conference Proceedings (OSTI)

Please see Genera! hrfonnatiorr for what is included with each registration category. ASN\\ 0 o w: Reglstratlon Form m I . h Value package includes admission to...

79

IEEE Copyright form  

Science Conference Proceedings (OSTI)

This form is intended for original, previously unpublished material submitted to lEEE .... IEEE Policy 6.17CLEARANCE OF PAPERSapplies to all material...

80

Author Biography Form  

Science Conference Proceedings (OSTI)

Author Biography Form. Title: ? Dr. ? Prof. ? Mr. ? Mrs. ? Ms. Gender: ? Male ? Female. Name: First. M.I.. Last. Current Status: Position: Company: Address:.

Note: This page contains sample records for the topic "form eia-860m year" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Housing Reservation Form  

Science Conference Proceedings (OSTI)

Zip. Phone. Fax. Credit Card Type*. Number. Expiration Date. Signature. * Visa, MasterCard and Discover credit cards are accepted. Mail or fax this form to:.

82

2014 Coal Form Proposals  

U.S. Energy Information Administration (EIA)

Coal Survey Form Changes Proposed for 2014. The U.S. Energy Information Administration (EIA) has begun the process of re-clearing the coal survey ...

83

Shaping and Forming  

Science Conference Proceedings (OSTI)

"ElectroplasticityThe Effect of Electricity on the Mechanical Properties of Metals " ..... "Spray Forming: Alloys, Products, and Markets" (JOM-e: Overview),...

84

tour reservation form  

Science Conference Proceedings (OSTI)

Mar 15, 2004 ... 37. Send completed Charlotte Tour Registration Form with payment to: America Charters Ltd, 1251 W. Craighead Road, Charlotte, NC 28206.

85

Tour Reservations Form (PDF)  

Science Conference Proceedings (OSTI)

May 2, 2008 ... Page 1. Tour Form. REGISTRANT INFORMATION (Print or type.) Last Name. First Name. Middle ______. Street Address. City. /Province...

86

Mentee Profile Form  

Energy.gov (U.S. Department of Energy (DOE))

The information you provide on this form will assist us in providing you with a list of prospective mentors from which to choose the most appropriate match.

87

Mentor Profile Form  

Energy.gov (U.S. Department of Energy (DOE))

The information you provide on this form will assist us in providing you with a list of prospective mentee from which to choose the most appropriate match.

88

Corporate Sponsorship Form - TMS  

Science Conference Proceedings (OSTI)

Sponsorship Reservation Form in order to reserve a sponsorship. Final payment is due ... Payment terms are net 30 days unless other arrangements are made.

89

Participation Form | ENERGY STAR  

NLE Websites -- All DOE Office Websites (Extended Search)

application. Select the ENERGY STAR program you intend to participate in, and choose your primary contacts. Return this form to ENERGY STAR for consideration as a partner....

90

Anniversary Scholarship Application Form  

E-Print Network (OSTI)

at the University of Cambridge should complete the application form below and send it to The Pakistan Application Pakistan. Pakistan nationals who attend schools outside Pakistan are not eligible. 2. Applicants must complete the scholarship application form should be submitted to: The Pakistan Application Centre Cambridge

Travis, Adrian

91

FFSE Online Membership Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Donation Form for FFSE Donation Form for FFSE This form is for people who would like like to donate to FFSE, but not become a member. If you would like to join or renew membership in Fermilab Friends for Science Education., please go to the Membership Form. You have three options for donating. A contribution to the general fund A contribution to the scholarship fund The purchase of a leaf for the Tree of Knowledge ($1,000) Use the tab key to go between text boxes; the keystrokes,"Return" and "Enter," have been disabled to avoid submitting the form prematurely. Donation to the General Fund PayPal - The safer, easier way to pay online! Contribution to Scholarship Fund The scholarship fund provides scholarships to: Schools to cover the cost of bus transportation to Fermilab for field trips. The cost averages about $100.

92

Method for forming materials  

DOE Patents (OSTI)

A material-forming tool and a method for forming a material are described including a shank portion; a shoulder portion that releasably engages the shank portion; a pin that releasably engages the shoulder portion, wherein the pin defines a passageway; and a source of a material coupled in material flowing relation relative to the pin and wherein the material-forming tool is utilized in methodology that includes providing a first material; providing a second material, and placing the second material into contact with the first material; and locally plastically deforming the first material with the material-forming tool so as mix the first material and second material together to form a resulting material having characteristics different from the respective first and second materials.

Tolle, Charles R. (Idaho Falls, ID); Clark, Denis E. (Idaho Falls, ID); Smartt, Herschel B. (Idaho Falls, ID); Miller, Karen S. (Idaho Falls, ID)

2009-10-06T23:59:59.000Z

93

Coach Compliance Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Coach Compliance Form Coach Compliance Form My team is participating in the Department of Energy's Lithium-Ion Battery Car Competition as part of the National Science Bowl ® . I have reviewed the following documents with the participating students: o Safety Hazards of Batteries o Material Safety Data Sheet - Lithium Polymer Battery o Electric Battery Car Competition Rules ______________________________ ______________ Coach Signature Date Name of School: ____________________________________________ Name of Coach (Please Print): ________________________________ Coach's Email Address: ______________________________________ Please sign this form and either mail, fax or e-mail a pdf to the National Renewable Energy Laboratory: National Renewable Energy Laboratory

94

Form EIA-920 - 2005  

U.S. Energy Information Administration (EIA) Indexed Site

Administration Administration Form EIA-920 (2004/2005) COMBINED HEAT AND POWER PLANT REPORT INSTRUCTIONS Form Approval OMB No. 1905-0129 Approval Expires: 11/30/2007 PURPOSE Form EIA-920 Combined Heat and Power Plant Report collects information from combined heat and power (CHP) plants in the United States. Data collected on this form include electric power generation, fuel consumption, fuel heat content, and fossil fuel stocks. These data are used to monitor the status and trends of the electric power industry, and appear in many EIA publications, including: Electric Power Monthly and Annual, Monthly and Annual Energy Reviews, Natural Gas Monthly and Annual, Quarterly Coal Report, and the Renewable Energy Annual. Further information can be found at

95

ARM - VAP Suggestion Form  

NLE Websites -- All DOE Office Websites (Extended Search)

ProductsVAP Suggestion Form ProductsVAP Suggestion Form Showcase Data ARM Best Estimate Data Products (ARMBE) This is a collection of data products that represents "best estimates" derived from several instruments and/or VAPs. We are interested in your feedback; please contact us. VAP Update Information on new, existing, and future value-added products for July-September 2013 is now available. Have a VAP idea? Use this form to let us know. Datastream Status Further details on the status of VAPs being processed or developed, can be found at on the ARM Value-Added Product (VAP) Status web page. Use the Data File Inventory tool to view VAP data availability at the file level. Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send VAP Suggestion Form

96

PASS Form 22933  

NLE Websites -- All DOE Office Websites (Extended Search)

Private: The information contained on this form is considered private and for administrative use only. Do not copy or distribute. Private: The information contained on this form is considered private and for administrative use only. Do not copy or distribute. PASS Form Information Form: 22933 Title of Experiment: "Comparing Chlorpyrifos Levels in Commercial vs. Organic Parsley" Principal Investigator: Lucinda Hemmick Institution: Longwood Sr. High School Primary Field of Research: Environmental Sciences Type of Proposal: Rapid Access On-site Access: Experiment will be performed on-site, in person by the PI's experimenters. The PI (and approved experimenters) may also request remote computer access for operating equipment, data collection and retrieving data. Research Abstract of this experiment. This section will be used for funding agency reporting purposes. This information and the proposal title may become public information.:

97

SGP Shipment Notification Form  

NLE Websites -- All DOE Office Websites (Extended Search)

PlainsShipment Notification Form PlainsShipment Notification Form SGP Related Links Facilities and Instruments Central Facility Boundary Facility Extended Facility Intermediate Facility Radiometric Calibration Facility Geographic Information ES&H Guidance Statement Operations Science Field Campaigns Visiting the Site Fact Sheet Images Information for Guest Scientists Contacts Shipment Notification Form Note: Red text indicates a required field. Your Notification Form has been submitted. Section 1 : Initiator Information Date Afilliation Name Phone Number Email Section 2 : Vendor Information Ship From Point of Contact Address Phone Section 3 : Carrier Information Shipping Company Tracking/AWB Number Number of Boxes Approximate Weight for EACH BOX Expected Ship Date Section 4 : Shipment List Description System/Instrument

98

Chemical Forms of Uranium  

NLE Websites -- All DOE Office Websites (Extended Search)

such as water vapor in the air, the UF6 and water react, forming corrosive hydrogen fluoride (HF) and a uranium-fluoride compound called uranyl fluoride (UO2F2). For this reason,...

99

Registration Form PDF  

Science Conference Proceedings (OSTI)

City: State/Province: Zip/Postal Code: Country: Telephone: Fax: E-mail: adVaNCE REGiSTRaTioN FoRM advance Registration deadline: January 16, 2009. 8.

100

Page 8, Benefit Forms  

NLE Websites -- All DOE Office Websites (Extended Search)

- 154 Kb - Allows an employee to designate a beneficiary for unpaid compensation (e.g. salary, annual leave or awards). TSP-1 - Thrift Savings Plan Election Form (Thrift Savings...

Note: This page contains sample records for the topic "form eia-860m year" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

EEO Intake Form  

Energy.gov (U.S. Department of Energy (DOE))

Download and fill out this form to start the process for Equal Employment Opportunity complaints at the Department of Energy. For more information about the EEO process, visit this site.

102

Nomination Form DEPARTMENT / UNIT  

E-Print Network (OSTI)

Nomination Form DEPARTMENT / UNIT: CAMPUS ADDRESS: CLASSIFICATION / TITLE: DEPARTMENT EMAIL ADDRESS: DEPARTMENT TELEPHONE: 2011 FRANKLIN STAFF SERVICE AWARDS START DATE IN DEPARTMENT / UNIT: ACTUAL NUMBER MEMBER DEADLINE: FRIDAY MARCH 4, 2011 ADDITIONAL COMMENTS: Signature of Head / Director of Nominee's Unit

Arnold, Jonathan

103

Nomination Form DEPARTMENT / UNIT  

E-Print Network (OSTI)

Nomination Form DEPARTMENT / UNIT: CAMPUS ADDRESS: CLASSIFICATION / TITLE: DEPARTMENT EMAIL ADDRESS: DEPARTMENT TELEPHONE: 2013 FRANKLIN STAFF SERVICE AWARDS START DATE IN DEPARTMENT / UNIT: ACTUAL NUMBER MEMBER DEADLINE: MARCH 5, 2013 ADDITIONAL COMMENTS: Signature of Head / Director of Nominee's Unit

Arnold, Jonathan

104

Nomination Form DEPARTMENT / UNIT  

E-Print Network (OSTI)

Nomination Form DEPARTMENT / UNIT: CAMPUS ADDRESS: CLASSIFICATION / TITLE: DEPARTMENT EMAIL ADDRESS: DEPARTMENT TELEPHONE: 2012 FRANKLIN STAFF SERVICE AWARDS START DATE IN DEPARTMENT / UNIT: ACTUAL NUMBER MEMBER DEADLINE: FRIDAY MARCH 2, 2012 ADDITIONAL COMMENTS: Signature of Head / Director of Nominee's Unit

Arnold, Jonathan

105

Nomination Form DEPARTMENT / UNIT  

E-Print Network (OSTI)

Nomination Form DEPARTMENT / UNIT: CAMPUS ADDRESS: CLASSIFICATION / TITLE: DEPARTMENT EMAIL ADDRESS: DEPARTMENT TELEPHONE: 2014 FRANKLIN STAFF SERVICE AWARDS START DATE IN DEPARTMENT / UNIT: ACTUAL NUMBER MEMBER DEADLINE: MARCH 7, 2014 ADDITIONAL COMMENTS: Signature of Head / Director of Nominee's Unit

Arnold, Jonathan

106

Form EIA-861 Instructions  

U.S. Energy Information Administration (EIA) Indexed Site

ANNUAL ELECTRIC POWER ANNUAL ELECTRIC POWER INDUSTRY REPORT INSTRUCTIONS FORM EIA-861 OMB No. 1905-0129 Approval Expires: 12/31/2015 Burden: 9.0 hrs PURPOSE Form EIA-861 collects information on the status of electric power industry participants involved in the generation, transmission, and distribution of electric energy in the United States, its territories, and Puerto Rico. The data from this form are used to accurately maintain the EIA list of electric utilities, to draw samples for other electric power surveys, and to provide input for the following EIA reports: Electric Power Monthly, Monthly Energy Review, Electric Power Annual, Annual Energy Outlook, and Annual Energy Review. The data collected on this form are used to monitor the current status and trends of the electric power industry and to evaluate the future

107

Rocky flats teams forming  

SciTech Connect

Bidding teams are shaping up to go after the $3.5-billion, five-year contract to manage ongoing operations and cleanup of the US Dept. of Energy`s Rocky Flats nuclear weapon plant near Denver.

NONE

1994-08-01T23:59:59.000Z

108

Technology Transfer Reporting Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

form is to be completed by the TTO for individual inquiry/case activity during the quarter as required form is to be completed by the TTO for individual inquiry/case activity during the quarter as required by the Technology Transfer Commercialization Act of 2000. Mouse over definitions and descriptions appear over text/check boxes where appropriate. After completing this form, click on the submit button. *If you have no TTO activity for the quarter, please fill in your name, FY and quarter, lab or facility and check the box "No Quarterly Activity". Initial Ombuds Contact: ____________________ Type: Inquiry Case Ombuds Name: __________________________ Time Spent: (Hours) ______________ Final Ombuds Involvement: _________________ Laboratory or Facility: AMES ANL BNL LBNL INL KCP LANL NREL LLNL NBL NETL PNNL NNSS ORNL PXSO SRNL

109

User Financial Account Form  

NLE Websites -- All DOE Office Websites (Extended Search)

URA REVISED 2/20/13 URA REVISED 2/20/13 User Financial Account Form Establish a user financial account at SLAC to procure gases, chemicals, supplies or services to support your experiment at SLAC's user facilities and to send samples, dewars, or other equipment between SLAC and your institution. To open or renew your SLAC user financial account, complete and submit this form along with a Purchase Order (PO) from your institution. The PO should be made to SLAC National Accelerator Laboratory for the amount of estimated expenditures (the suggested minimum is $1,000). Send this form with the PO (or a letter from the financial officer of your institution) to: Jackie Kerlegan (SSRL) or Theresa Wong (LCLS) User Research Administration, MS 99 User Research Administration, MS 99 SLAC National Accelerator Laboratory

110

Travel Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Lodging Lodging Transportation SNAP COLLABORATION MEETING JUNE 1 - 3, 2006 TRAVEL FUNDING REQUEST FORM If you require Travel funding support from LBNL to attend the SNAP Collaboration Meeting, please fill out the travel request form below and click on the "SEND" button. As an alternative, you can simply email the requested information on the form to snap@lbl.gov Deadline: Please submit your request NLT Wednesday, May 10, 2006. Disclaimer: Please note that the submission of this request does not automatically constitute funding approval. 1. First Name Last Name 2. Has this travel funding support been pre-approved by the SNAP management? Yes No 3. If answer to #2 is "Yes": a) Approval by whom? b) What was the maximum reimbursement amount from SNAP?

111

Secretarial Award Nomination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Secretary's Awards Program Nomination Form Secretary's Awards Program Nomination Form 1. Type of Award (Check Applicable Box) Secretary's Honor Awards Secretary's Departure Awards Secretary's James R. Schlesinger Award Exceptional Service Award Appreciation Award Excellence Award Distinguished Service Award Achievement Award Meritorious Service Award 2. Nominee (Full) Name Check if Group list is attached (As it is to appear on the certificate) For Departure and Appreciation Awards Only 3. Certificate Date 4. Award Presentation Date 5. Current Position Title 6. Award Justification: Continue on blank sheet of paper and attach if you need more space. 7. Award Citation: A citation of no more than 20 lines must be attached to nomination form. 8 . Requesting Office : 9a. Local Approvals: One or more signatures is typical but not required

112

Form EIA-920 - 2005  

U.S. Energy Information Administration (EIA) Indexed Site

20 (2004/2005) 20 (2004/2005) |COMBINED HEAT AND POWER PLANT REPORT INSTRUCTIONS|Form Approval OMB No. 1905-0129 Approval Expires: 11/30/2007 | |PURPOSE|Form EIA-920 Combined Heat and Power Plant Report collects information from combined heat and power (CHP) plants in the United States. Data collected on this form include electric power generation, fuel consumption, fuel heat content, and fossil fuel stocks. These data are used to monitor the status and trends of the electric power industry, and appear in many EIA publications, including: Electric Power Monthly and Annual, Monthly and Annual Energy Reviews, Natural Gas Monthly and Annual, Quarterly Coal Report, and the Renewable Energy Annual. Further information can be found at

113

Research Input Form  

NLE Websites -- All DOE Office Websites (Extended Search)

HighlightsSubmit HighlightsSubmit Form Submit a New Research Highlight Sort Highlights Submitter Title Research Area Working Group Submission Date DOE Progress Reports Notable Research Findings for 2001-2006 Biological and Environmental Research Abstracts Database Research Highlights Summaries Research Highlight Submittal Form Tell us about your research! This form is designed to collect summary information about working group research results. If you have any questions or comments, please contact the administrators. Journal or Book Reference(s) (if applicable): Look Up Your reference from the Publications Database. Limit two references. If you have not submitted the references, please Add it now. Area of Research: Radiation Processes Cloud Distributions/Characterizations Surface Properties General Circulation and Single Column

114

DOE FOIA Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Administration FOIA Request Form Administration FOIA Request Form To make an Electronic FOIA (E-FOIA) request, please provide the information below. Failure to enter accurate and complete information may render your FOIA request impossible to fulfill. * Requests submitted under the Privacy Act must be signed and, therefore, cannot be submitted on this form. Name: (Required) Organization: Address: (Required) Phone: FAX: Email: Reasonably Describe Records Describe the specific record (s) you seek with sufficient detail that a knowledgeable official of the activity may locate the record with a reasonable amount of effort. Such detail should include: dates, titles, file designations, and offices to be searched. Since most DOE records are not retained permanently, the more information that you provide, the better the opportunity there is to determine if the

115

Compute Reservation Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Queue Look Queue Wait Times Hopper Queues and Policies Edison Queues and Policies Carver Queues and Policies Dirac Queues and Policies Compute Reservation Request Form Job Logs & Analytics Training & Tutorials Software Accounts & Allocations Policies Data Analytics & Visualization Data Management Policies Science Gateways User Surveys NERSC Users Group User Announcements Help Operations for: Passwords & Off-Hours Status 1-800-66-NERSC, option 1 or 510-486-6821 Account Support https://nim.nersc.gov accounts@nersc.gov 1-800-66-NERSC, option 2 or 510-486-8612 Consulting http://help.nersc.gov consult@nersc.gov 1-800-66-NERSC, option 3 or 510-486-8611 Home » For Users » Queues and Scheduling » Compute Reservation Request Form Compute Reservation Request Form

116

Document Control Template-Form  

NLE Websites -- All DOE Office Websites (Extended Search)

5ADocument Control Template - ExcelForm EOTA - Business Form Document Title: P-001, Document Control Process Document Number: Document Control Template - Excel Form EOTA...

117

Document Control Template-Form  

NLE Websites -- All DOE Office Websites (Extended Search)

4Document Control Template - Form 110815.doc 110815 Page 1 of 5 EOTA - Business Form Document Title: Document Control Template - Form Document Number: F-004 Rev. 110815...

118

FORM EIA-821 ANNUAL FUEL OIL AND KEROSENE SALES REPORT  

U.S. Energy Information Administration (EIA)

Version No.: 2013.01. FORM EIA-821 ANNUAL FUEL OIL AND KEROSENE SALES REPORT REFERENCE YEAR 2012 ; This report is ; ... 2012 . 10. Type of Report

119

FORM EIA-856 MONTHLY FOREIGN CRUDE OIL ACQUISITION REPORT  

U.S. Energy Information Administration (EIA)

Mo Year Report Period: EIA ID NUMBER: Mailing Address: Zip Code - Secure File Transfer option available at: Email form to: OOG.SURVEYS@eia.doe.gov

120

Detecting alien life forms  

NLE Websites -- All DOE Office Websites (Extended Search)

Detecting alien life forms Detecting alien life forms Name: Brian S Foster Status: N/A Age: N/A Location: N/A Country: N/A Date: N/A Question: What would you do to find out if there is any life form on other planets? Replies: If you mean intelligent life, probably the best way would be to listen for radio messages, since you could do this from very far away. Earth emits as much radio energy as a small star --- very noticeable. If you mean just any kind of life it gets harder and you would have to send a robot or human in a spacecraft to visit. You could then look for the absorption of reflected light by oxygen molecules in the atmosphere. Oxygen is such a reactive molecule that it can only stay in the atmosphere if it is continually replenished by something, such as plants photosynthesizing. We cannot of course know that other life will build itself as does life on Earth, out of carbon-containing molecules which are formed by cracking apart carbon dioxide molecules with light energy (releasing oxygen). So the only sure way would probably be to land on the planet and look around. And even then you might well miss something

Note: This page contains sample records for the topic "form eia-860m year" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Clean Metal Spray Forming  

Science Conference Proceedings (OSTI)

controlled transfer of liquid metal from the ESR pool to the spray forming system is performed using a ... heating to maintain superheat and avoid freezing of the liquid metal as it flows through the funnel. ... As is the case with all similar cross-.

122

Tour Reservation Form  

Science Conference Proceedings (OSTI)

TOUR ORDER FORM. Tour Date. Time. Cost. # of Tickets. Total Cost. #1. Sunday 2/9. 1:00 PM - 5:30 PM. $24.00. #2. Monday 2/10. 9:00 AM - 12:30 PM. $9.00.

123

Nomination Form DEPARTMENT / UNIT  

E-Print Network (OSTI)

Nomination Form DEPARTMENT / UNIT: CAMPUS ADDRESS: JOB TITLE: DEPARTMENT EMAIL ADDRESS: DEPARTMENT TELEPHONE: 2014 FRANKLIN STAFF EXCELLENCE AWARDS START DATE IN DEPARTMENT / UNIT: Nominee Information NAME / RESEARCHPROFESSIONAL Signature of Head / Director of Nominee's Unit: NOMINATION PACKET DEADLINE: MARCH 7, 2014 PLEASE

Arnold, Jonathan

124

Nomination Form DEPARTMENT / UNIT  

E-Print Network (OSTI)

Nomination Form DEPARTMENT / UNIT: CAMPUS ADDRESS: JOB TITLE: DEPARTMENT EMAIL ADDRESS: DEPARTMENT TELEPHONE: 2012 FRANKLIN STAFF EXCELLENCE AWARDS START DATE IN DEPARTMENT / UNIT: Nominee Information NAME / RESEARCHPROFESSIONAL Signature of Head / Director of Nominee's Unit: NOMINATION PACKET DEADLINE: FRIDAY MARCH 2, 2012

Arnold, Jonathan

125

Nomination Form DEPARTMENT / UNIT  

E-Print Network (OSTI)

Nomination Form DEPARTMENT / UNIT: CAMPUS ADDRESS: JOB TITLE: DEPARTMENT EMAIL ADDRESS: DEPARTMENT TELEPHONE: 2011 FRANKLIN STAFF EXCELLENCE AWARDS START DATE IN DEPARTMENT / UNIT: Nominee Information NAME / RESEARCHPROFESSIONAL Signature of Head / Director of Nominee's Unit: NOMINATION PACKET DEADLINE: FRIDAY MARCH 4, 2011

Arnold, Jonathan

126

Nomination Form DEPARTMENT / UNIT  

E-Print Network (OSTI)

Nomination Form DEPARTMENT / UNIT: CAMPUS ADDRESS: JOB TITLE: DEPARTMENT EMAIL ADDRESS: DEPARTMENT TELEPHONE: 2013 FRANKLIN STAFF EXCELLENCE AWARDS START DATE IN DEPARTMENT / UNIT: Nominee Information NAME / RESEARCHPROFESSIONAL Signature of Head / Director of Nominee's Unit: NOMINATION PACKET DEADLINE: MARCH 5, 2013 PLEASE

Arnold, Jonathan

127

STANDARD FORM NO. 64  

Office of Legacy Management (LM)

/qz-5 /qz-5 STANDARD FORM NO. 64 rl . . .' . , G Ojice Memoawl crl LA STATES GOVER pi,+ ip; ; / (' , TO : F. M . Belmore, M remtor, Produution Division DATE: Deomnber FROM : R. F. Van Wy TV Mvision of Teohnioal Advisers SUBJECT: R?IQUEST FOR&m SYMBOL: TA:RFV:rle For use under ooxrkraot AT-300l=Gen-72 at Columibia University, m request 6 pieoes Of A toleranoe of plus ordinary uranium out to the sizes listed below. or llliZlU8 l/16" i8 sati8faotory. P x 1u x 1" 1" x 1 !k x 1" tixl x1" 3P 4 x 12 x 1" ororr-se&ion of l;% x 1" are reque8ted, rq~are to 2" square are aomptable. Please 1. 1. Havena, Pupin Phy8ioe Laboratory, Columbia University, New York City. 2 pieoerr 2 piece8 2 pieoea 2 pieces Although pieces with a

128

Fermilab Today - Announcements Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Announcements Form Announcements Form Subscribe | Contact Us | Archive | Classifieds | Guidelines | Help Search GO Fermilab Announcements policy Announcements must be submitted no later than 12 p.m. (noon) the day before the desired run date. Last-minute announcements will be considered on a case-by-case basis. To place an urgent announcement into Fermilab Today, please contact the Office of Communication at (630) 840-3351. Announcements will run from the time they are submitted until the selected expiration date, which may be no later than one month after the submission date. Anyone who would like to run his or her announcement for longer than one month will need to resubmit the announcement after the first submission expires. Fermilab Today staff will feature as many headlines as space permits in Fermilab Today and link to the announcements on the Announcements webpage.

129

2008 Form 3468  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

545-0155 545-0155 Investment Credit Form 3468 ᮣ Attach to your tax return. See instructions. Attachment Sequence No. 52 Identifying number Name(s) shown on return 1 For Paperwork Reduction Act Notice, see instructions. Form 3468 (2008) c × 30% (.30) × 30% (.30) 5 Cat. No. 12276E If you are claiming the investment credit as a lessee based on a section 48(d) (as in effect on November 4, 1990) election, provide the following information. If you acquired more than one property as a lessee, attach a statement showing the information below. (99) Name of lessor $ $ b $ $ Department of the Treasury Internal Revenue Service 2 5a 5b 5c × $1,000 5d 5e × 30% (.30) × $3,000 Kilowatt capacity of property in f above ᮣ g h Enter the lesser of line 5f or 5g 3 4 2008

130

Gammasphere Checklist form  

NLE Websites -- All DOE Office Websites (Extended Search)

Gammasphere Checklist - Submission Form Gammasphere Checklist - Submission Form The use of the FMA and Gammasphere, combined or separately, can involve a number of detection systems and special features. The details of how the measurement will be done should be presented as part of the proposal. Some information on these systems is on the web at www.phy.anl.gov/gammasphere/aux/index.html. For assistance in preparing a proposal and for helping the Program Advisory Committee get a more accurate picture of what is planned, we ask you to use the checklist below. Please check the devices that will be needed for the proposed measurement, and include the checklist with your proposal. Note that some of the items are still under development - others may require considerable planning. Note also that a number of the 'primary' detectors (those that may be needed to

131

Publication Submission Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Pages Pages publicationsubmission Sign In Launch the Developer Dashboard SLAC National Accelerator Laboratory DOE | Stanford | SLAC | SSRL | LCLS | AD | PPA | Photon Science | PULSE | SIMES LCLS : Linac Coherent Light Source An Office of Science User Facility Search this site... Search Help (new window) Top Link Bar LCLS Lasers Expand Lasers LCLS Quick Launch Home About LCLS Expand About LCLS LCLS News Expand LCLS News User Resources Expand User Resources Instruments Expand Instruments Proposals Publications Expand Publications Schedules Machine Status Machine FAQs Safety Organization Expand Organization Directories Expand Directories Staff Resources Contact Us All Site Content Department of Energy Page Content Publication Submission Form Th Tell LCLS about new publications Please submit this form to notify LCLS about new publications relating to

132

SAFETY SHOE ISSUANCE FORM  

NLE Websites -- All DOE Office Websites (Extended Search)

SAFETY SHOE ISSUANCE FORM SAFETY SHOE ISSUANCE FORM The employee named below is authorized to purchase one pair of protective footwear, rated by ASTM F 2413-05 (or ANSI Z41-1999) to protect against workplace hazards. The Laboratory will subsidize this protective footwear issuance up to the authorized annual limit of $150.00. □ The employee named below is authorized to purchase one pair of fatigue reducing shoe insoles. The Laboratory will subsidize this shoe insole issuance up to the authorized annual limit of $35.00. Note: Box must be checked to indicate supervisor approval of the purchase of fatigue reducing shoe insoles. Employee Name:__________________________ Project ID Number:__________ Employee ID Number:______________________ Payroll Deduction:___________

133

ORPS User Registration Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DEPARTMENT OF ENERGY DEPARTMENT OF ENERGY OPERATIONAL EVENT INFORMATION SYSTEMS REGISTRATION FORM User Registration For: ORPS SUBMIT TO: U.S. DOE: PHONE: 800-473-4375 HSS InfoCenter, HS-1.22, 270CC FAX: 301-903-9823 1000 Independence Ave., SW Washington, DC 20585-0270 (Type or Print) 1. Name__________________________________________________________________________Birth date_______/_______ (Last) (First) (Middle Initial) (Month) (Day) 2.JobTitle_______________________________________________________________________________________________ 3. Company Name________________________________________________________________________________________ 4. Address________________________________________________ Mail Stop______________________________________

134

How do viruses form?  

NLE Websites -- All DOE Office Websites (Extended Search)

How do viruses form? How do viruses form? Name: street Location: N/A Country: N/A Date: N/A Question: How do viruses form? Replies: Well, I'll assume you mean how they replicate, since they do not (as far as we know) arise from inorganic materials. Viruses are generally thought of as obligate parasites -- that is, they need the assistance of another organism for their survival. Depending on the type of virus you're looking at you'll see many different ways of accomplishing the same goal -- reproduction. In very general terms, then, a virus will attach itself to an appropriate host cell and insert it's genetic code into the DNA of the host, which then goes thorough it's normal routine of reading through its own code to synthesize proteins and enzymes, and in the process inadvertently replicates the strand of viral DNA (or RNA, depending), which codes for its own proteins and concentrates within the cell. At some point, the cell will not be able to support that many viral particles within it's membrane, and it will die, releasing thousands of new viral particles into the environment to do the dirty deed all over again.

135

Form factors from lattice QCD  

Science Conference Proceedings (OSTI)

Precision computation of hadronic physics with lattice QCD is becoming feasible. The last decade has seen precent-level calculations of many simple properties of mesons, and the last few years have seen calculations of baryon masses, including the nucleon mass, accurate to a few percent. As computational power increases and algorithms advance, the precise calculation of a variety of more demanding hadronic properties will become realistic. With this in mind, I discuss the current lattice QCD calculations of generalized parton distributions with an emphasis on the prospects for well-controlled calculations for these observables as well. I will do this by way of several examples: the pion and nucleon form factors and moments of the nucleon parton and generalized-parton distributions.

Dru Renner

2012-04-01T23:59:59.000Z

136

Miscellaneous Waste-Form FEPs  

SciTech Connect

The US DOE must provide a reasonable assurance that the performance objectives for the Yucca Mountain Project (YMP) potential radioactive-waste repository can be achieved for a 10,000-year post-closure period. The guidance that mandates this direction is under the provisions of 10 CFR Part 63 and the US Department of Energy's ''Revised Interim Guidance Pending Issuance of New US Nuclear Regulatory Commission (NRC) Regulations (Revision 01, July 22, 1999), for Yucca Mountain, Nevada'' (Dyer 1999 and herein referred to as DOE's Interim Guidance). This assurance must be demonstrated in the form of a performance assessment that: (1) identifies the features, events, and processes (FEPs) that might affect the performance of the potential geologic repository; (2) examines the effects of such FEPs on the performance of the potential geologic repository; (3) estimates the expected annual dose to a specified receptor group; and (4) provides the technical basis for inclusion or exclusion of specific FEPs.

A. Schenker

2000-12-08T23:59:59.000Z

137

Standard Form 270  

NLE Websites -- All DOE Office Websites (Extended Search)

ADVANCE ADVANCE OR REIMBURSEMENT (See instructions on back) OMB APPROVAL NO. PAGE OF 00348-0004 PAGES 1. TYPE OF PAYMENT REQUESTED a. "X" one or both boxes 2. BASIS OF REQUEST ADVANCE REIMBURSE- MENT CASH ACCRUAL b. "X" the applicable box FINAL PARTIAL 3. FEDERAL SPONSORING AGENCY AND ORGANIZATIONAL ELEMENT TO 4. FEDERAL GRANT OR OTHER 5. PARTIAL PAYMENT REQUEST WHICH THIS REPORT IS SUBMITTED IDENTIFYING NUMBER ASSIGNED NUMBER FOR THIS REQUEST BY FEDERAL AGENCY 6. EMPLOYER IDENTIFICATION 7. RECIPIENT'S ACCOUNT NUMBER NUMBER OR IDENTIFYING NUMBER 8. PERIOD COVERED BY THIS REQUEST FROM (month, day, year) TO (month, day, year) 9. RECIPIENT ORGANIZATION 10. PAYEE (Where check is to be sent if different than item 9) Name: Number and Street: City, State and ZIP Code: Name:

138

FORM EIA-846(F)  

U.S. Energy Information Administration (EIA) Indexed Site

No. 1905-0169: Approval Expires March 31,1989 No. 1905-0169: Approval Expires March 31,1989 FORM EIA-846(F) (6-S-86) U.S. DEPARTMENT OF COMMERCE .(djSS^X BUREAU OF THE CENSUS ^p^TlJ^v ACTING AS COLLECTING AND COMPILING AGENT FOR / NOTICE - Response to this inquiry is required by lew (Federal Energy Administration Act of 1 974, as amended, P.L. 93-275). By Section 9 of Title 1 3, U.S. Code, your report to the Census Bureau is

139

FORM EIA-846C  

U.S. Energy Information Administration (EIA) Indexed Site

No. 1905-0169: Approval Expires 04/30/91 No. 1905-0169: Approval Expires 04/30/91 FORM EIA-846C (5-1 89) U.S. DEPARTMENT Of COMMERCE BUREAU OF THE CENSUS ACTING AS COLLECTING AND COMPILING AGENT FOR UNITED STATES DEPARTMENT OF ENERGY ENERGY INFORMATION ADMINISTRATION Public reporting burden for this collection of information is estimated to average 8 hours per response, including the time of reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to the Energy Information Administration, Office of Statistical Standards, El-73, Mail Station: 1H-023 Forrestal, 1000 Independence Avenue, SW, Washington, DC 20485; and to the Office of Information and

140

Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

t t Categorical Exclusion Determination Form Proposed Action Title: (0471-1563) University of South Florida - Development of a Low Cost Thermal Energy Storage System Using Phase Change Materials with Enhanced Radiation Heat Transfer Program or Field Office: Advanced Research Projects Agency - Energy Location(s) (City/County/State): Tampa, FL Proposed Action Description: Funding will support development of low cost, industrially scalable capsules containing high-temperature phase change materials (PCMs) for use in thermal energy storage (TES) systems to enable continuous power supply from concentrated solar thermal and nuclear power plants. No nuclear research and development activities will take place under this project. ARPA-E has undertaken a review of the work to be performed

Note: This page contains sample records for the topic "form eia-860m year" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

EOTA … Business Form  

NLE Websites -- All DOE Office Websites (Extended Search)

ISDF 042 Validation and Acceptance 11_0414 Page 1 of 4 ISDF 042 Validation and Acceptance 11_0414 Page 1 of 4 EOTA - Business Form Document Title: Validation and Acceptance Document Number: ISDF -042 Rev. 11_0414 Document Owner: Vickie Pleau Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: ISDP-002 Training Production Process Notify of Changes: MGT, ISD, QAM Referenced Document(s): ISDF-010 After Action Report ISDF 042 Validation and Acceptance 11_0414 Page 2 of 4 Revision History: Rev . Description of Change 10_0630 Initial Release 11_0414 Deleted FMT final Course Acceptance block ISDF 042 Validation and Acceptance 11_0414 Page 3 of 4 Course Validation and Acceptance Validation denotes the product meets customer operational expectations in the medium which it

142

EOTA … Business Form  

NLE Websites -- All DOE Office Websites (Extended Search)

4 New Employee Checklist 10_0806.docx Page 1 of 5 4 New Employee Checklist 10_0806.docx Page 1 of 5 EOTA - Business Form Document Title: New Employee Checklist Document Number: MGTF-004 Rev. 10_0806 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: MGTP-002, Skill Set / Training Process Notify of Changes: EOTA Managers Referenced Document(s): N/A MGTF-004 New Employee Checklist 10_0806.docx Page 2 of 5 Revision History: Rev. Description of Change A Initial Release B Changes made 2/28/08 08_0411 Added New Hire Orientation Course to checklist, added guidance for completion of checklist 09_0409 Updated "Responsible Person" on checklist. 09_0421 Added "Initiate/Update U.S. Access profile" as a new FMT responsibility. Renumbered checklist items.

143

SSRL28 Registration Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Need more information? Contact: Cathy Knotts Manager, URA SSRL, MS 99 2575 Sand Hill Road Menlo Park, CA 94025 28th Annual Stanford Synchrotron Radiation Laboratory Users' Meeting Menlo Park, California USA October 17-19, 2001 Registration Form -- CLOSED -- Full Name: Institution: Address: City: State: Zip Code: Country: Phone: Fax: E-mail: Citizenship: Registration: The Registration fee includes meeting materials, invited talks, poster presentations, and vendor exhibits. Registration ($150) Student Registration ($50) Users' Mtg. Invited Speaker Workshop Only (click here & see below) Meals and Social Events: Please specify quantity of tickets desired and if vegetarian meal preferred. Select 1-Regular 1-Vegetarian 2-Regular 2-Vegetarian 2-(1 of each) Lunch, Oct. 18 ($8 per person)

144

Form EIA-851Q  

U.S. Energy Information Administration (EIA) Indexed Site

ITEM 1: FACILITY INFORMATION ITEM 1: FACILITY INFORMATION Name: County: State: Owner: Type: Rated Capacity: Operating Status: ITEM 2: PRODUCTION Pounds U 3 O 8 October-2013 November-2013 December-2013 Total = 0.0 ITEM 3: PRODUCTION SOURCE Mine name(s) Pounds U 3 O 8 Other type: Pounds U 3 O 8 Total = 0.0 COMMENTS All other information you provide will be used for statistical purposes only. In accordance with the Confidential Information Protection provisions of Title V, Subtitle A of Public Law 107-347 and other applicable Federal laws, your responses will be kept confidential and will not be disclosed in identifiable form to anyone other than employees or agents without your consent. By law, every EIA employee, as well as every agent, is subject to a jail term, a fine of up to $250,000, or both if he or she discloses ANY identifiable

145

Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ergy ergy Categorical Exclusion Determination Form Proposed Action Title: (0472-1569) G~tomics - Double Sator Switched Reluctance Motor (DSSRM) Technology Progi'am or Field Office: Advanced Research Projects Agency - Energy Location(s) (City/County/State): San Diego, CA Proposed Action Description: General Atomics, in conjunction with the University of Texas-Dallas (UT Dallas), proposes to develop double-stator switched reluctance motor (DSSRM) for electric vehicles (EVs) that will eliminate the use of permanent magnet-based motors that rely on rare earth metals in EVs. General Atomics' application was selected for an initial 18-month period (Phase 1) of funding. The ARPA-E Program Director may decide to negotiate and fund project activities for an additional 18-month period (Phase II) after evaluating the work performed in Phase I. ARPA-E has not obligated

146

Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

y y Categorical Exclusion Determination Form Proposed Action Title: (0471-1595) Regents of the University of Minnesota - Thermal Fuel: Solar Fuels via Partial Redox Cycles with Heat Recovery Program or Field Office: Advanced Research Projects Agency - Energy LocationCs) CCity/County/State): Minnesota, California, and Colorado. Proposed Action Description: Funding will support development of a dual zone solar thermochemical reactor to produce fuel using ceria-based reactive materials in partial redox cycles and high heat recovery levels through counter-circulation of solid state components. Proposed work consists of indoor laboratory-based research and development, including: (1) designing, fabricating, and characterizing an optimized ceria-based reactive element for use in the reactor to enable maximum fuel productivity and durability; (2) designing and fabricating a

147

Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

n rgy n rgy Categorical Exclusion Determination Form Proposed Action Title: (0474-1555) University of Colorado - Boulder - Wafer-Level Sub-Module Integrated DCfDC Converter Program or Field Office: Advanced Research Projects Agency - Energy LocationCs) CCity/County/State): Colorado, Maine, Virginia Proposed Action Description: Funding will support development of a planar, wafer-level sub-module integrated converter (SubMIC) device that can be integrated into various types of photovoltaic (PV) modules to enable low-cost maximum power point tracking at high power processing efficiencies. Proposed work consists of indoor laboratory-based research and development (R&D), microfabrication activities, and analytical research, including: (1) simulated modeling and design of SubMIC components and integrated units, (2) development, fabrication, testing, and optimization

148

EOTA … Business Form  

NLE Websites -- All DOE Office Websites (Extended Search)

1 Internal Audit Report 11_0304 Page 1 of 3 1 Internal Audit Report 11_0304 Page 1 of 3 EOTA - Business Form Document Title: Internal Audit Report Document Number: F-011 Rev. 11_0304 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: P-007, Internal Audit Process Notify of Changes: Internal Auditors Referenced Document(s): N/A F-011 Internal Audit Report 11_0304 Page 2 of 3 Revision History: Rev. Description of Change A Initial Release 08_0502 Added "(PAR or IO may be required)" to Opportunity for Improvement section. 11_0304 Added Recommendation and Action Item Area F-011 Internal Audit Report 11_0304 Internal Audit Report Audit #: Lead Auditor: Audit Date: Audit Team: Document # Audited: Standard / Criteria Used:

149

Form EIA-861 Instructions  

U.S. Energy Information Administration (EIA) Indexed Site

ANNUAL ELECTRIC POWER ANNUAL ELECTRIC POWER INDUSTRY REPORT Form EIA-861 OMB No. 1905-0129 Approval Expires: 12/31/2015 Burden: 9 Hours NOTICE: This report is mandatory under the Federal Energy Administration Act of 1974 (Public Law 93-275). Failure to comply may result in criminal fines, civil penalties and other sanctions as provided by law. For further information concerning sanctions and data protections see the provisions on sanctions and the provisions concerning the confidentiality of information in the instructions. Title 18 U.S.C. 1001 makes it a criminal offense for any person knowingly and willingly to make to any Agency or Department of the United States any false, fictitious, or fraudulent statements as to any matter within its jurisdiction.

150

Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

of n y of n y Categorical Exclusion Determination Form Proposed Action Title: (0471-1607) University of Florida - Solar Thermochemical Fuel Production via a Novel Low Pressure, Magnetically Stabilized, Non-Volatile Iron Oxide Looping Process Program or Field Office: Advanced Research Projects Agency - Energy LocationCs) CCity/County/State): Gainesville, FL Proposed Action Description: University of Florida proposes to develop a novel solar thermochemical reactor with inputs of water, recycled carbon dioxide (C02), and concentrated solar energy to cost-effectively produce Syngas, a renewable, carbon-neutral fuel. Project activities will include: (1) modeling, design, and fabrication of a high efficiency 1 OkW reactor prototype; (2) test analysis of bench-scale

151

Spray-formed tooling  

SciTech Connect

The United States Council for Automotive Research (USCAR) has formed a partnership with the Idaho National Engineering Laboratory (INEL) to develop a process for the rapid production of low-cost tooling based on spray forming technology developed at the INEL. Phase 1 of the program will involve bench-scale system development, materials characterization, and process optimization. In Phase 2, prototype systems will be de signed, constructed, evaluated, and optimized. Process control and other issues that influence commercialization will be addressed during this phase of the project. Technology transfer to USCAR, or a tooling vendor selected by USCAR, will be accomplished during Phase 3. The approach INEL is using to produce tooling, such as plastic injection molds and stamping dies, combines rapid solidification processing and net-shape materials processing into a single step. A bulk liquid metal is pressure-fed into a de Laval spray nozzle transporting a high velocity, high temperature inert gas. The gas jet disintegrates the metal into fine droplets and deposits them onto a tool pattern made from materials such as plastic, wax, clay, ceramics, and metals. The approach is compatible with solid freeform fabrication techniques such as stereolithography, selective laser sintering, and laminated object manufacturing. Heat is extracted rapidly, in-flight, by convection as the spray jet entrains cool inert gas to produce undercooled and semi-solid droplets. At the pattern, the droplets weld together while replicating the shape and surface features of the pattern. Tool formation is rapid; deposition rates in excess of 1 ton/h have been demonstrated for bench-scale nozzles.

McHugh, K.M.; Key, J.F.

1994-12-31T23:59:59.000Z

152

New Employee Orientation- Forms Checklist  

Energy.gov (U.S. Department of Energy (DOE))

Listing of the forms to be issued and collected at a new employee's orientation. Please review the checklist to ensure that you bring all of the needed forms.

153

Radiation Safety Work Control Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Radiation Safety Work Control Form (see instructions on pg-2) Rev July-2012 Area: Form : Date: Preliminary Applicability Screen: (a) Will closing the beam line injection stoppers...

154

CRA Memorandum form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Memorandum Memorandum To: Poonum Agrawal, David Meyer, U.S. Department of Energy CRA No. D08554-00 From: Prashant Murti, Alex Rudkevich, CRA International Date: Finalized March 13, 2006 Subject: GE MAPS INPUT ASSUMPTIONS: EASTERN INTERCONNECT This memorandum summarizes salient inputs to the CRA locational price forecasting model (GE MAPS). The model geographic footprint encompasses the US portion of the Eastern Interconnect and the Canadian province of Ontario. The analyses simulate the years 2008 and 2011. Primary data sources for the CRA GE MAPS model include the NERC MMWG, the General Electric generation and transmission databases for the Eastern Interconnect, various publications by NERC regions and Independent System Operators, FERC submissions by generation and transmission owners,

155

Waste form product characteristics  

SciTech Connect

The Department of Energy has operated nuclear facilities at the Idaho National Engineering Laboratory (INEL) to support national interests for several decades. Since 1953, it has supported the development of technologies for the storage and reprocessing of spent nuclear fuels (SNF) and the resultant wastes. However, the 1992 decision to discontinue reprocessing of SNF has left nearly 768 MT of SNF in storage at the INEL with unspecified plans for future dispositioning. Past reprocessing of these fuels for uranium and other resource recovery has resulted in the production of 3800 M{sup 3} calcine and a total inventory of 7600 M{sup 3} of radioactive liquids (1900 M{sup 3} destined for immediate calcination and the remaining sodium-bearing waste requiring further treatment before calcination). These issues, along with increased environmental compliance within DOE and its contractors, mandate operation of current and future facilities in an environmentally responsible manner. This will require satisfactory resolution of spent fuel and waste disposal issues resulting from the past activities. A national policy which identifies requirements for the disposal of SNF and high level wastes (HLW) has been established by the Nuclear Waste Policy Act (NWPA) Sec.8,(b) para(3)) [1982]. The materials have to be conditioned or treated, then packaged for disposal while meeting US Environmental Protection Agency (EPA) and Nuclear Regulatory Commission (NRC) regulations. The spent fuel and HLW located at the INEL will have to be put into a form and package that meets these regulatory criteria. The emphasis of Idaho Chemical Processing Plant (ICPP) future operations has shifted toward investigating, testing, and selecting technologies to prepare current and future spent fuels and waste for final disposal. This preparation for disposal may include mechanical, physical and/or chemical processes, and may differ for each of the various fuels and wastes.

Taylor, L.L.; Shikashio, R.

1995-01-01T23:59:59.000Z

156

2009 Reporting Year  

U.S. Energy Information Administration (EIA)

FRS Accumu- Book Value Year End Year's Foot Line # Gross Lated DD&A Net Additions DD&A of Disposals Other Balance Additions Other note Petroleum: A BCD E F G H IJ

157

Benefit Forms | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

New Employee Orientation » Benefit Forms New Employee Orientation » Benefit Forms Benefit Forms The employment and benefits forms that you will be asked to complete as part of this orientation program can be numerous. Each, however, serves an important purpose in ensuring proper recording of your employment and benefit elections. This online program is designed to make the task a little easier. Each set of forms that you will work with has been compiled to ensure that you are only completing the essential documentation for your individual employment circumstance. Also, each set begins with an Employee Information Form that, upon completion, will auto-populate applicable data throughout the entire package. All of the forms are in PDF format and require Acrobat Reader to view and fill-in. When you open the form "Packages," it will load in a separate

158

SSRL Computer Account Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

SSRLLCLS Computer Account Request Form August 2009 Fill in this form and sign the security statement mentioned at the bottom of this page to obtain an account. Your Name:...

159

DOE Form 1322.4  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2.4 2.4 (09-98) All other editions are obsolete. Instructions: Forward completed checklist/approval form(s) to your organizational Forms Manager for review and coordination of approval. Forms are approved by HR-41. U.S. DEPARTMENT OF ENERGY FORMS CHECKLIST / APPROVAL I. ANALYSIS II. DESIGN, PRINTING AND STORAGE 1. TYPE OF FORM / REPORT 4. DATA COLLECTION 2. TITLE 5. Current Form No.: 6. Prescribing Directive: 3. FREQUENCY OF USE Single Daily Weekly Quarterly Monthly Annually Semi-Annually New Revision Cancellation Yes No 7. Purpose and content of form / report have been reviewed, and are reasonable and in keeping with the function of the originating organization. Y N 9. Format is arranged in effective manner with data elements in logical sequence according to workflow or types of source documents.

160

YEAR 2 BIOMASS UTILIZATION  

DOE Green Energy (OSTI)

This Energy & Environmental Research Center (EERC) Year 2 Biomass Utilization Final Technical Report summarizes multiple projects in biopower or bioenergy, transportation biofuels, and bioproducts. A prototype of a novel advanced power system, termed the high-temperature air furnace (HITAF), was tested for performance while converting biomass and coal blends to energy. Three biomass fuels--wood residue or hog fuel, corn stover, and switchgrass--and Wyoming subbituminous coal were acquired for combustion tests in the 3-million-Btu/hr system. Blend levels were 20% biomass--80% coal on a heat basis. Hog fuel was prepared for the upcoming combustion test by air-drying and processing through a hammer mill and screen. A K-Tron biomass feeder capable of operating in both gravimetric and volumetric modes was selected as the HITAF feed system. Two oxide dispersion-strengthened (ODS) alloys that would be used in the HITAF high-temperature heat exchanger were tested for slag corrosion rates. An alumina layer formed on one particular alloy, which was more corrosion-resistant than a chromia layer that formed on the other alloy. Research activities were completed in the development of an atmospheric pressure, fluidized-bed pyrolysis-type system called the controlled spontaneous reactor (CSR), which is used to process and condition biomass. Tree trimmings were physically and chemically altered by the CSR process, resulting in a fuel that was very suitable for feeding into a coal combustion or gasification system with little or no feed system modifications required. Experimental procedures were successful for producing hydrogen from biomass using the bacteria Thermotoga, a deep-ocean thermal vent organism. Analytical procedures for hydrogen were evaluated, a gas chromatography (GC) method was derived for measuring hydrogen yields, and adaptation culturing and protocols for mutagenesis were initiated to better develop strains that can use biomass cellulose. Fly ash derived from cofiring coal with waste paper, sunflower hulls, and wood waste showed a broad spectrum of chemical and physical characteristics, according to American Society for Testing and Materials (ASTM) C618 procedures. Higher-than-normal levels of magnesium, sodium, and potassium oxide were observed for the biomass-coal fly ash, which may impact utilization in cement replacement in concrete under ASTM requirements. Other niche markets for biomass-derived fly ash were explored. Research was conducted to develop/optimize a catalytic partial oxidation-based concept for a simple, low-cost fuel processor (reformer). Work progressed to evaluate the effects of temperature and denaturant on ethanol catalytic partial oxidation. A catalyst was isolated that had a yield of 24 mole percent, with catalyst coking limited to less than 15% over a period of 2 hours. In biodiesel research, conversion of vegetable oils to biodiesel using an alternative alkaline catalyst was demonstrated without the need for subsequent water washing. In work related to biorefinery technologies, a continuous-flow reactor was used to react ethanol with lactic acid prepared from an ammonium lactate concentrate produced in fermentations conducted at the EERC. Good yields of ester were obtained even though the concentration of lactic acid in the feed was low with respect to the amount of water present. Esterification gave lower yields of ester, owing to the lowered lactic acid content of the feed. All lactic acid fermentation from amylose hydrolysate test trials was completed. Management activities included a decision to extend several projects to December 31, 2003, because of delays in receiving biomass feedstocks for testing and acquisition of commercial matching funds. In strategic studies, methods for producing acetate esters for high-value fibers, fuel additives, solvents, and chemical intermediates were discussed with several commercial entities. Commercial industries have an interest in efficient biomass gasification designs but are waiting for economic incentives. Utility, biorefinery, pulp and paper, or o

Christopher J. Zygarlicke

2004-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "form eia-860m year" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Matryoshka of Special Democratic Forms  

E-Print Network (OSTI)

Special p-forms are forms which have components \\phi_{\\mu_1...\\mu_p} equal to +1,-1 or 0 in some orthonormal basis. A p-form \\phi\\in \\Lambda^p R^d is called democratic if the set of nonzero components {\\phi_{\\mu_1...\\mu_p}} is symmetric under the transitive action of a subgroup of O(d,Z) on the indices {1,...,d}. Knowledge of these symmetry groups allows us to define mappings of special democratic p-forms in d dimensions to special democratic P-forms in D dimensions for successively higher P \\geq p and D \\geq d. In particular, we display a remarkable nested stucture of special forms including a U(3)-invariant 2-form in six dimensions, a G_2-invariant 3-form in seven dimensions, a Spin(7)-invariant 4-form in eight dimensions and a special democratic 6-form \\Omega in ten dimensions. The latter has the remarkable property that its contraction with one of five distinct bivectors, yields, in the orthogonal eight dimensions, the Spin(7)-invariant 4-form. We discuss various properties of this ten dimensional form.

Chandrashekar Devchand; Jean Nuyts; Gregor Weingart

2008-12-16T23:59:59.000Z

162

STUDENT INTERN RELOCATION BENEFIT REQUEST FORM  

NLE Websites -- All DOE Office Websites (Extended Search)

01-RBR (8-2013) 01-RBR (8-2013) UCI (When Completed) UCI (When Completed) STUDENT INTERN RELOCATION BENEFIT REQUEST FORM Instructions for New Hire, Re-hire or Year-round Intern returning to Sandia work site from remote location: Review eligibility criteria below. If you believe that you may be eligible to receive relocation benefits from Sandia, complete and sign this form, then return to the CA or NM Student Intern Programs office. ELIGIBILITY CRITERIA Name: Phone: Email: School/Academic Residence Address Permanent Address Address 1 Address 2 City State Zip Code Student Acknowledgement: I certify that the information stated on this form is correct and complete to best of my knowledge. I

163

Document Control Template-Form  

NLE Websites -- All DOE Office Websites (Extended Search)

2 Key Check-Out Form 10_0823 Page 1 of 3 2 Key Check-Out Form 10_0823 Page 1 of 3 EOTA - Business Form Document Title: Key Check-Out Form Document Number: MGTF-012 Rev. 10_0823 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: MGTP-003, Control of Customer Property Notify of Changes: MGT, ADM Referenced Document(s): N/A MGTF-012 Key Check-Out Form 10_0823 Page 2 of 3 Revision History: Rev. Description of Change 10_0823 Initial Release MGTF-012 Key Check-Out Form 10_0823 NATIONAL NUCLEAR SECURITY ADMINISTRATION Emergency Operations Training Academy Key Check-Out Form Name: Initial Suite Key: Date returned: Furniture Key: Date returned: Building Key: Date returned: Other Key(s): Date returned:

164

Document Control Template-Form  

NLE Websites -- All DOE Office Websites (Extended Search)

7 Equipment Check-Out Form 08_0411 Page 1 of 3 7 Equipment Check-Out Form 08_0411 Page 1 of 3 EOTA - Business Form Document Title: Equipment Check-Out Form Document Number: MGTF-007 Rev. 08_0411 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: MGTP-003, Control of Customer Property Notify of Changes: MGT, ADM Referenced Document(s): N/A MGTF-007 Equipment Check-Out Form 08_0411 Page 2 of 3 Revision History: Rev. Description of Change A Initial Release 08_0411 Footer removed as document is for internal use only MGTF-007 Equipment Check-Out Form 08_0411 NATIONAL NUCLEAR SECURITY ADMINISTRATION Emergency Operations Training Academy EQUIPMENT CHECK-OUT FORM Name: Date taken:

165

Allocation Year Rollover  

NLE Websites -- All DOE Office Websites (Extended Search)

Allocation Year Rollover Allocation Year Rollover Allocation Year Rollover: 2013 to 2014 Note: Allocation Year 2013 (AY13) ends at 23:59:59 on Monday, January 13, 2014. AY14 runs from Tuesday, January 14, 2014 through Monday, January 12, 2015. Below are major changes that will go into effect with the beginning of AY14 on Tuesday, January 14, 2014. All times listed are PST. Scheduled System Downtimes There will be no service disruption during the allocation year rollover this year. Interactive and batch use will continue uninterrupted (except for "premium" jobs on Hopper; see below). Charging Across AY Boundary All batch jobs will continue running during the rollover. Time accrued before midnight will be charged to AY13 repos; time accrued after midnight will be charged to AY14 repos. Running batch jobs that are associated with

166

The development of the contested city form of Shenzhen, China  

E-Print Network (OSTI)

The population of Shenzhen Special Economic Zone has exploded, within twenty-three years, from thirty thousand to 4.7 million with average 28 percent annual per capita GDP increase. What city forms have been sustaining ...

Tian, Hao, 1978-

2005-01-01T23:59:59.000Z

167

EIA - 2008 New Electric Power EIA-860 Form Filing Requirements  

U.S. Energy Information Administration (EIA)

Who Must File Form EIA-860? All existing power plants and those planned (within 5 years) new power plants that: 1) have a total generator nameplate capacity (sum for ...

168

NIST Atomic Form Factors: Form factors and standard ...  

Science Conference Proceedings (OSTI)

... 2. Form Factors and Standard Definitions. ... with ? in, eg, ngstroms; the "anomalous" scattering factor f? (depending on x-ray energy E and the ...

169

Form EIA-861S ANNUAL ELECTRIC POWER INDUSTRY REPORT (SHORT FORM)  

U.S. Energy Information Administration (EIA) Indexed Site

INDUSTRY REPORT (SHORT FORM) INSTRUCTIONS OMB No. 1905-0129 Approval Expires: 12/31/2016 Burden: 2.01 Hours Page 1 Draft for Discussion only PURPOSE Form EIA-861S collects information on the status of selected electric power industry participants involved in the sale, and distribution of electric energy in the United States. The data collected on this form are used to monitor the current status and trends of the electric power industry and to evaluate the future of the industry. REQUIRED RESPONDENTS The Form EIA-861S is to be completed by all electric utilities with annual retail sales in the prior year of 100,000 megawatt-hours or less, with the following exceptions: 1. A respondent has retail sales of unbundled service; 2. A full set of data is required from the respondent to ensure that statistical estimates

170

form  

Science Conference Proceedings (OSTI)

184 THORN HILL ROAD. WARRENDALE, PA 15086-7514. USA. Promoting the global science and engineering Professions concerned with minerals, metals...

171

Seal for fluid forming tools  

SciTech Connect

An electro-hydraulic forming tool for forming a sheet metal blank in a one-sided die has first and second rigid rings that engage opposite sides of a sheet metal blank. The rigid rings are contained within slots on a die portion and a hydraulic force applicator portion of the forming tool. The seals are either resiliently biased by an elastomeric member or inherently resiliently biased into contact with the blank.

Golovashchenko, Sergey Fedorovich (Beverly Hills, MI); Bonnen, John Joseph Francis (Milford, MI)

2012-03-20T23:59:59.000Z

172

Pu-238 fuel form activities, January 1-31, 1983  

SciTech Connect

This monthly report for /sup 238/Pu Fuel Form Activities has two main sections: SRP-PuFF facility and SRL Fuel Form Activities. The program status, budget information, and milestone schedules are discussed in each main section. The Work Breakdown Structure (WBS) for this program is shown. Only one monthly report per year is processed for EDB.

1983-03-01T23:59:59.000Z

173

Pu-238 fuel form activities, January 1-31, 1981  

SciTech Connect

This monthly report for /sup 238/Pu Fuel Form Activities has two main sections: SRP-PuFF facility and SRL Fuel Form Activities. The program status, budget information, and milestone schedules are discussed in each main section. The Work Breakdown Structure (WBS) for this program is shown. Only one monthly report per year is processed for EDB.

1981-02-01T23:59:59.000Z

174

Pu-238 fuel form activities, January 1-31, 1982  

SciTech Connect

This monthly report for /sup 238/Pu fuel form activities has two main sections: SRP-PuFF facility and SRL fuel form activities. The program status, budget information, and milestone schedules are discussed in each main section. The Work Breakdown Structure (WBS) for this program is shown. Only one monthly report per year is processed for EDB.

1982-03-01T23:59:59.000Z

175

Employee In-Processing Forms  

Energy.gov (U.S. Department of Energy (DOE))

Editable PDF in-processing forms which can be filled out by new employees prior to their first day of work

176

System for forming janus particles  

DOE Patents (OSTI)

The invention is a method of forming Janus particles, that includes forming an emulsion that contains initial particles, a first liquid, and a second liquid; solidifying the first liquid to form a solid that contains at least a portion of the initial particles on a surface of the solid; and treating the exposed particle sides with a first surface modifying agent, to form the Janus particles. Each of the initial particles on the surface has an exposed particle side and a blocked particle side.

Hong, Liang (Midland, MI); Jiang, Shan (Champaign, IL); Granick, Steve (Champaign, IL)

2011-01-25T23:59:59.000Z

177

Homeowner Soil Sample Information Form  

E-Print Network (OSTI)

Homeowners should submit this form with their soil samples when requesting a soil test from the Texas A&M Soil Testing Laboratory.

Provin, Tony

2007-04-11T23:59:59.000Z

178

Document Control Template-Form  

NLE Websites -- All DOE Office Websites (Extended Search)

3 Media Requests 080904 EOTA - Business Form Document Title: ITTP-018, Media Inventory Control Document Number: Media Requests ITT, ADM Ben Aragon NA Referenced Documents: Parent...

179

Price/Cost Proposal Form  

NLE Websites -- All DOE Office Websites (Extended Search)

PRICECOST PROPOSAL FORM Page No. of NREL Solicitation Document Number: Offeror's Name and Address: Title of Proposed Effort and Task No., Phase No., or Project Total, As...

180

Pu-238 fuel form activities, June 1-30, 1980  

SciTech Connect

This monthly report for Pu-238 Fuel Form Activities has two main sections: SRP-PuFF Pu-238 Fuel Form Production Processes and SRL Pu-238 Fuel Form Research and Development. The program status, budget information, and milestone information are discussed in each main section. The Work Breakdown Structures (WBS) for this program is outlined. Only one monthly report per year is processed for EDB.

1980-07-18T23:59:59.000Z

Note: This page contains sample records for the topic "form eia-860m year" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Applied Science and Technology Task Order Fiscal Year 2009 Year...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

09 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2009 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2009 Year-End...

182

Applied Science and Technology Task Order Fiscal Year 2010 Year...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

0 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2010 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2010 Year-End...

183

Applied Science and Technology Task Order Fiscal Year 2011 Year...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2011 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2011 Year-End...

184

Applied Science and Technology Task Order Fiscal Year 2008 Year...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2008 Year-End Summary Report Applied Science and Technology Task Order Fiscal Year 2008 Year-End...

185

10-Year Outlook Executive Summary  

E-Print Network (OSTI)

The provincial government?s plan to phase out coal?fired generation in favour of cleaner forms of generation represents one of the most significant undertakings in the 100?year history of Ontario?s electricity sector. Aging generation facilities and the continued increase in demand for electricity add to the urgency of proceeding with new generating and transmission facilities over the next 10 years. Over the last 12 months 650 MW of new gas?fired generation has been put in place and 515 MW of nuclear generation and 370 MW of renewable generation is expected to be in service within the next 18 months. There are also a number of projects totalling more than 9,000 MW of additional capacity that are in various stages of discussion, development or negotiation. Timely progress to achieve this additional capacity must continue if Ontario is to ensure a reliable supply of electricity over the next decade and beyond. This 10?year Outlook from the Independent Electricity System Operator (IESO) provides an assessment of the demand?supply picture for the province over the next decade and provides a plan identifying the timing and requirements of system changes needed to meet the governments coal shutdown timeframe. Under the provisions of Bill 100, the Ontario Power

unknown authors

2005-01-01T23:59:59.000Z

186

Programmed design of ship forms  

Science Conference Proceedings (OSTI)

This paper describes a new category of CAD applications devoted to the definition and parameterization of hull forms, called programmed design. Programmed design relies on two prerequisites. The first one is a product model with a variety of types large ... Keywords: CAD language, Hull form, Parametric design, Product model, Programmed design

A. Rodrguez; L. Fernndez-Jambrina

2012-07-01T23:59:59.000Z

187

Method of forming ceramic bricks  

SciTech Connect

A method for forming free standing ceramic bricks for use as tritium breeder material is disclosed. Aqueous solutions of sodium carbonate and potassium carbonate are mixed with an organic hydrocolloid dispersion and powdered lithium carbonate, spray dried, and ceramic bricks formed by molding in a die and firing.

Poeppel, Roger B. (Glen Ellyn, IL); Claar, Terry D. (Newark, DE); Silkowski, Peter (Urbana, IL)

1988-01-01T23:59:59.000Z

188

Electromagnetic form factors of hadrons  

SciTech Connect

A vector meson dominance model of the electromagnetic form factors of hadrons is developed which is based on the use of unstable particle propagators. Least-square fits are made to the proton, neutron, pion and kaon form factor data in both the space and time-like regions. A good fit to the low-energy nucleon form factor data is obtained using only rho, $omega$, and phi dominance, and leads to a determination of the vector meson resonance parameters in good agreement with experiment. The nucleon-vector meson coupling constants obey simple sum rules indicating that there exists no hard core contribution to the form factors within theoretical uncertainties. The prediction for the electromagnetic radii of the proton is in reasonable agreement with recent experiments. The pion and kaon charge form factors as deduced from the nucleon form factors assuming vector meson universality are compared to the data. The pion form factor agrees with the data in both the space and time-like regions. The pion charge radius is in agreement with the recent Dubna result, but the isovector P-wave pion-pion phase shift calculated from the theory disagrees with experiment. A possible contribution to the form factors from a heavy rho meson is also evaluated. (auth)

Zidell, V.S.

1976-01-01T23:59:59.000Z

189

Waste Pickup Form User's Guide  

E-Print Network (OSTI)

Waste Pickup Form User's Guide Updated: 3/13/12 #12;Introduction: Welcome to the Cal State University Fullerton Online Waste Pickup Form User's Guide. In this guide you will learn what you can use phosphorus-32) 3. To request a pickup of universal waste including light bulbs, aerosol cans, batteries

de Lijser, Peter

190

Comments on Form Factor Bounds  

E-Print Network (OSTI)

Improved model independent upper bounds on the weak transition form factors are derived using inclusive sum rules. Comparison of the new bounds with the old ones is made for the form factors h_{A_1} and h_V in B -> D* decays.

Chiang, C W

2000-01-01T23:59:59.000Z

191

Remarks on Form Factor Bounds  

E-Print Network (OSTI)

Improved model independent upper bounds on the weak transition form factors are derived using inclusive sum rules. Comparison of the new bounds with the old ones is made for the form factors h_{A_1} and h_V in B -> D* decays.

Cheng-Wei Chiang

1999-09-07T23:59:59.000Z

192

Method of forming ceramic bricks  

DOE Patents (OSTI)

A method for forming free standing ceramic bricks for use as tritium breeder material is disclosed. Aqueous solutions of sodium carbonate and potassium carbonate are mixed with an organic hydrocolloid dispersion and powdered lithium carbonate, spray dried, and ceramic bricks formed by molding in a die and firing.

Poeppel, R.B.; Claar, T.D.; Silkowski, P.

1987-04-22T23:59:59.000Z

193

Previous Year Awards  

NLE Websites -- All DOE Office Websites (Extended Search)

Awards Awards Previous Year Awards 2013 Allocation Awards This page lists the allocation awards for NERSC for the 2013 allocation year (Jan 8, 2013 through Jan 13, 2014). Read More » NERSC Initiative for Scientific Exploration (NISE) 2013 Awards NISE is a mechanism used for allocating the NERSC reserve (10% of the total allocation). In 2013 we made the second year of the two-year awards made in 2012, supplemented by projects selected by the NERSC director. Read More » Data Intensive Computing Pilot Program 2012/2013 Awards NERSC's new data-intensive science pilot program is aimed at helping scientists capture, analyze and store the increasing stream of scientific data coming out of experiments, simulations and instruments. Read More » 2012 Allocation Awards This page lists the allocation awards for NERSC for the 2012 allocation

194

Welcome Year in Review  

National Nuclear Security Administration (NNSA)

1 NMMSS Users Annual Training Meeting Orlando, Florida-May 23-25, 2006 Sponsored by the U.S. Department of Energy & the U.S. Nuclear Regulatory Commission Welcome & Year In Review...

195

New Species of Cyanobacteria Forms Intracellular Carbonates  

NLE Websites -- All DOE Office Websites (Extended Search)

New Species of Cyanobacteria New Species of Cyanobacteria Forms Intracellular Carbonates New Species of Cyanobacteria Forms Intracellular Carbonates Print Wednesday, 30 January 2013 00:00 A new species of cyanobacteria-photosynthetic bacteria that occupy a wide array of habitats-was discovered in the Mexican Lake of Alchichica where massive carbonate rocks form. Cyanobacteria have been impacting the global carbon cycle of the Earth for more than 2.3 billion years by assimilating CO2 into organic compounds and triggering calcium carbonate (CaCO3) precipitation. Despite the importance of this cyanobacteria-mediated CaCO3 biomineralization, the mechanistic details of this process are still poorly understood. Scientists agree that calcification in cyanobacteria is an extracellular process: Photosynthesizing cells commonly export the photosynthesis byproduct CO32- outside their cells where it bonds with an alkaline earth metal like Ca2+. The cyanobacteria recently found in Lake Alchichica, however, forms amorphous Ca-, Mg-, Sr- and Ba-rich carbonates intracellularly. This discovery significantly modifies the traditional view of how bacteria induce CaCO3 precipitation and may improve understanding of the fossil record by hinting at ancient traces of life in rocks, or designing new routes for sequestering CO2 or 90Sr in minerals.

196

New Species of Cyanobacteria Forms Intracellular Carbonates  

NLE Websites -- All DOE Office Websites (Extended Search)

New Species of Cyanobacteria Forms Intracellular Carbonates Print New Species of Cyanobacteria Forms Intracellular Carbonates Print A new species of cyanobacteria-photosynthetic bacteria that occupy a wide array of habitats-was discovered in the Mexican Lake of Alchichica where massive carbonate rocks form. Cyanobacteria have been impacting the global carbon cycle of the Earth for more than 2.3 billion years by assimilating CO2 into organic compounds and triggering calcium carbonate (CaCO3) precipitation. Despite the importance of this cyanobacteria-mediated CaCO3 biomineralization, the mechanistic details of this process are still poorly understood. Scientists agree that calcification in cyanobacteria is an extracellular process: Photosynthesizing cells commonly export the photosynthesis byproduct CO32- outside their cells where it bonds with an alkaline earth metal like Ca2+. The cyanobacteria recently found in Lake Alchichica, however, forms amorphous Ca-, Mg-, Sr- and Ba-rich carbonates intracellularly. This discovery significantly modifies the traditional view of how bacteria induce CaCO3 precipitation and may improve understanding of the fossil record by hinting at ancient traces of life in rocks, or designing new routes for sequestering CO2 or 90Sr in minerals.

197

New Species of Cyanobacteria Forms Intracellular Carbonates  

NLE Websites -- All DOE Office Websites (Extended Search)

New Species of Cyanobacteria Forms Intracellular Carbonates Print New Species of Cyanobacteria Forms Intracellular Carbonates Print A new species of cyanobacteria-photosynthetic bacteria that occupy a wide array of habitats-was discovered in the Mexican Lake of Alchichica where massive carbonate rocks form. Cyanobacteria have been impacting the global carbon cycle of the Earth for more than 2.3 billion years by assimilating CO2 into organic compounds and triggering calcium carbonate (CaCO3) precipitation. Despite the importance of this cyanobacteria-mediated CaCO3 biomineralization, the mechanistic details of this process are still poorly understood. Scientists agree that calcification in cyanobacteria is an extracellular process: Photosynthesizing cells commonly export the photosynthesis byproduct CO32- outside their cells where it bonds with an alkaline earth metal like Ca2+. The cyanobacteria recently found in Lake Alchichica, however, forms amorphous Ca-, Mg-, Sr- and Ba-rich carbonates intracellularly. This discovery significantly modifies the traditional view of how bacteria induce CaCO3 precipitation and may improve understanding of the fossil record by hinting at ancient traces of life in rocks, or designing new routes for sequestering CO2 or 90Sr in minerals.

198

New Species of Cyanobacteria Forms Intracellular Carbonates  

NLE Websites -- All DOE Office Websites (Extended Search)

New Species of Cyanobacteria Forms Intracellular Carbonates Print New Species of Cyanobacteria Forms Intracellular Carbonates Print A new species of cyanobacteria-photosynthetic bacteria that occupy a wide array of habitats-was discovered in the Mexican Lake of Alchichica where massive carbonate rocks form. Cyanobacteria have been impacting the global carbon cycle of the Earth for more than 2.3 billion years by assimilating CO2 into organic compounds and triggering calcium carbonate (CaCO3) precipitation. Despite the importance of this cyanobacteria-mediated CaCO3 biomineralization, the mechanistic details of this process are still poorly understood. Scientists agree that calcification in cyanobacteria is an extracellular process: Photosynthesizing cells commonly export the photosynthesis byproduct CO32- outside their cells where it bonds with an alkaline earth metal like Ca2+. The cyanobacteria recently found in Lake Alchichica, however, forms amorphous Ca-, Mg-, Sr- and Ba-rich carbonates intracellularly. This discovery significantly modifies the traditional view of how bacteria induce CaCO3 precipitation and may improve understanding of the fossil record by hinting at ancient traces of life in rocks, or designing new routes for sequestering CO2 or 90Sr in minerals.

199

First Name Last Name EMPLOYEE INFORMATION FORM  

NLE Websites -- All DOE Office Websites (Extended Search)

Name Name Last Name EMPLOYEE INFORMATION FORM Date of Birth SSN Married Not Married Male Female Current Home Address Line 1 Current Home Address Line 2 City State Zip Zip+4 Home Phone Number Department/Agency Operating Administration Office Position Title Grade Work Address Line 1 Work Address Line 2 City State Zip Zip+4 Office Phone Number Affidavit Date Appointment Date Apartment # Middle Name Use as Beneficiary Yes No U.S. Department of Energy 1955 Fremont Avenue Idaho Falls ID 83415 STANDARD FORM 144 (Rev. 10/95) Page 2 Office of Personnel Management The Guide to Processing Personnel Actions STATEMENT OF PRIOR FEDERAL SERVICE To be Completed by Employee NSN 7540-00-634-4101 Previous Edition Usable 144-114 1. Name (Last, First, Middle Initial) 2. Social Security Number 3. Date of Birth (Month, Day, Year)

200

Routine Form EIA-895 Edit Checks Each  

Gasoline and Diesel Fuel Update (EIA)

Routine Routine Form EIA-895 Edit Checks Each filing of the Form EIA-895 is manually checked for reasonableness and mathematical accuracy. Volumes are converted, as necessary, to a standard 14.73 psia pressure base. Value data are compared to the previous year's data for reasonableness. When data on nonhydrocarbon gases re- moved, gas vented and flared, and gas used for repressuring are not reported for a State that historically reported one or more of these items, a volume is imputed. The imputation is based on the average ratio of gas volumes in the missing category to total gross withdrawals in States with values reporting gas in that category. This average ratio is applied to the volume of total gross withdrawals reported by the State to calculate the volume for the missing items. State agencies are contacted by telephone in order to correct errors. Amended filings or resubmissions are not

Note: This page contains sample records for the topic "form eia-860m year" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

First Name Last Name EMPLOYEE INFORMATION FORM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

First Name First Name Last Name EMPLOYEE INFORMATION FORM Date of Birth SSN Married Not Married Male Female Current Home Address Line 1 Current Home Address Line 2 City State Zip Zip+4 Home Phone Number Department/Agency Operating Administration Office Position Title Grade Work Address Line 1 Work Address Line 2 City State Zip Zip+4 Office Phone Number Affidavit Date Appointment Date Apartment # Middle Name Use as Beneficiary Yes No U.S. Department of Energy 1000 Independence Ave. SW Washington DC 20585 STANDARD FORM 144 (Rev. 10/95) Page 2 Office of Personnel Management The Guide to Processing Personnel Actions STATEMENT OF PRIOR FEDERAL SERVICE To be Completed by Employee NSN 7540-00-634-4101 Previous Edition Usable 144-114 1. Name (Last, First, Middle Initial) 2. Social Security Number 3. Date of Birth (Month, Day, Year)

202

Fire Protection Account Request Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fire Protection System Account Request Form Fire Protection System Account Request Form To obtain a user id and password to access the Fire Protection system, please complete the form, save the file and email it to hssUserSupport@hq.doe.gov or print and fax it to 301-903-9823. We will provide a username and password to new account holders. Please allow several business days to process your account request. When your request is approved, you will be contacted with your

203

HHS SMALL BUSINESS REVIEW FORM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE Form 4220.2 (Revised March 14 2013) DOE Form 4220.2 (Revised March 14 2013) Office of Small and Disadvantaged Business Utilization DOE F 4220.2 - Small Business Review Form (03/14/2013) OSDBU Control Number: _______________________________________Date Received: ______________________________ A. Project Information 1. Requisition Number: ________________________ Acquisition Instrument Proposed/Contract Type: [ ] Contract No (Mod): ______________________ [ ] Departmental IDIQ No: ___________________ [ ] GSA Schedule: _________________________ [ ] GWAC Contract: ________________________ [ ] DOE BPA:_____________________________ 2. Acquisition Office and Program Element: CO/CS Name: Contact Information (Telephone and E-mail): 3. Description of services or supplies:

204

Agency Improvement Plan For Fiscal Year 2006 and Fiscal Year...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Improvement Plan For Fiscal Year 2006 and Fiscal Year 2007 More Documents & Publications U.S> Department of Energy, Fiscal Year 2007 Buy American Act Report. Audit Report:...

205

Medical Treatment Authorization Form _____________________________________________________________________ DOB___/____/____  

E-Print Network (OSTI)

Medical Treatment Authorization Form if they are in excess of other valid and collectible insurance. 1. List any medical conditions that camp personnel): _____________________________________________________________________________________ _____________________________________________________________________________________ 2. List any medications currently taking

206

Process for forming planarized films  

DOE Patents (OSTI)

A planarization process and apparatus which employs plasma-enhanced chemical vapor deposition (PECVD) to form plarnarization films of dielectric or conductive carbonaceous material on step-like substrates.

Pang, Stella W. (Arlington, MA); Horn, Mark W. (North Chelmsford, MA)

1991-01-01T23:59:59.000Z

207

Materials Week '97: Registration Form  

Science Conference Proceedings (OSTI)

Failure Analysis/Characterization and Testing Conferences (MC) ... (NOTES: This offer is available to full conference registrants only; also, you must print this form and mail or fax it with your signature in order to qualify ... Country of Citizenship.

208

Instructions for Form EIA-1605  

U.S. Energy Information Administration (EIA)

U.S. Department of Energy U.S. Energy Information Administration ... Section 1605(b) of the Energy Policy Act (EPAct) of 1992 (42 USC 13385). The form implements the

209

Triggered pore-forming agents  

DOE Patents (OSTI)

An inactive pore-forming agent which is activated to lytic function by a condition such as pH, light, heat, reducing potential, or metal ion concentration, or substance such as a protease, at the surface of a cell.

Bayley, Hagan (Grafton, MA); Walker, Barbara J. (Auburn, MA); Chang, Chung-yu (Worcester, MA); Niblack, Brett (Nashville, TN); Panchal, Rekha (Shrewsbury, MA)

1998-01-01T23:59:59.000Z

210

EIA-412 Form and Instructions  

U.S. Energy Information Administration (EIA) Indexed Site

12 (2003) |ANNUAL ELECTRIC INDUSTRY FINANCIAL REPORT |Form 12 (2003) |ANNUAL ELECTRIC INDUSTRY FINANCIAL REPORT |Form Approved OMB No. 1905-0129 Approval Expires 11/30/04 | | |GENERAL INFORMATION| |PURPOSE Form EIA-412 collects accounting, plant statistics, and transmission data from various electric industry entities in the United States. The data from this report appear in the following EIA publications: Financial Statistics of Major U.S. Publicly Owned Electric Utilities and Electric Power Annual. The data collected on this form are used to monitor the current status and trends of the electric power industry and to evaluate the future of the industry.| |REQUIRED RESPONDENTS The accounting data (Schedules 1 through 8) are to be completed by each municipality, political subdivision, State, and Federal entity engaged in the generation, transmission, or distribution of

211

Residential California adobe : mud form  

E-Print Network (OSTI)

Northern California has a rich tradition of adobe architecture . Formed with earth, defined by site, climate and use, the adobe structures exemplify a building methodology in harmony with nature and the lifestyle of it's ...

Daymond, Diana Leigh

1985-01-01T23:59:59.000Z

212

2014 Teacher Workshop Registration Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Teacher Workshop Registration Form Teacher Workshop Registration Form Workshop name and dates: (Please check those you want to attend; fees do not include Aurora University graduate credit.) Insects at Work in Our World: $110 June 19-20 Beauty and Charm at Fermilab: $275 July 14-18 Particles and Prairies: $275 July 21-25 Phriendly Physics: $275 July 28-August 1 The Prairie - Our Heartland: $175

213

Method for forming metal contacts  

DOE Patents (OSTI)

Methods of forming metal contacts with metal inks in the manufacture of photovoltaic devices are disclosed. The metal inks are selectively deposited on semiconductor coatings by inkjet and aerosol apparatus. The composite is heated to selective temperatures where the metal inks burn through the coating to form an electrical contact with the semiconductor. Metal layers are then deposited on the electrical contacts by light induced or light assisted plating.

Reddington, Erik; Sutter, Thomas C; Bu, Lujia; Cannon, Alexandra; Habas, Susan E; Curtis, Calvin J; Miedaner, Alexander; Ginley, David S; Van Hest, Marinus Franciscus Antonius Maria

2013-09-17T23:59:59.000Z

214

Methods of forming hardened surfaces  

DOE Patents (OSTI)

The invention encompasses a method of forming a metallic coating. A metallic glass coating is formed over a metallic substrate. After formation of the coating, at least a portion of the metallic glass can be converted into a crystalline material having a nanocrystalline grain size. The invention also encompasses metallic coatings comprising metallic glass. Additionally, the invention encompasses metallic coatings comprising crystalline metallic material, with at least some of the crystalline metallic material having a nanocrystalline grain size.

Branagan, Daniel J. (Iona, ID)

2004-07-27T23:59:59.000Z

215

INEL spray-forming research  

SciTech Connect

Spray forming is a near-net-shape fabrication technology in which a spray of finely atomized liquid droplets is deposited onto a suitably shaped substrate or mold to produce a coherent solid. The technology offers unique opportunities for simplifying materials processing without sacrificing, and oftentimes substantially improving, product quality. Spray forming can be performed with a wide range of metals and nonmetals, and offers property improvements resulting from rapid solidification (e.g. refined microstructures, extended solid solubilities and reduced segregation). Economic benefits result from process simplification and the elimination of unit operations. Researchers at the Idaho National Engineering Laboratory (INEL) are developing spray-forming technology for producing near-net-shape solids and coatings of a variety of metals, polymers, and composite materials. Results from several spray-forming programs are presented to illustrate the range of capabilities of the technique as well as the accompanying technical and economic benefits. Low-carbon steel strip >0.75 mm thick and polymer membranes for gas/gas and liquid/liquid separations that were spray formed are discussed; recent advances in spray forming molds, dies, and other tooling using low-melting-point metals are described.

McHugh, K.M.; Key, J.F.

1992-01-01T23:59:59.000Z

216

INEL spray-forming research  

SciTech Connect

Spray forming is a near-net-shape fabrication technology in which a spray of finely atomized liquid droplets is deposited onto a suitably shaped substrate or mold to produce a coherent solid. The technology offers unique opportunities for simplifying materials processing without sacrificing, and oftentimes substantially improving, product quality. Spray forming can be performed with a wide range of metals and nonmetals, and offers property improvements resulting from rapid solidification (e.g. refined microstructures, extended solid solubilities and reduced segregation). Economic benefits result from process simplification and the elimination of unit operations. Researchers at the Idaho National Engineering Laboratory (INEL) are developing spray-forming technology for producing near-net-shape solids and coatings of a variety of metals, polymers, and composite materials. Results from several spray-forming programs are presented to illustrate the range of capabilities of the technique as well as the accompanying technical and economic benefits. Low-carbon steel strip >0.75 mm thick and polymer membranes for gas/gas and liquid/liquid separations that were spray formed are discussed; recent advances in spray forming molds, dies, and other tooling using low-melting-point metals are described.

McHugh, K.M.; Key, J.F.

1992-12-31T23:59:59.000Z

217

DOE Form 1332.4  

NLE Websites -- All DOE Office Websites (Extended Search)

4# 4# LABOR PLAN OMB Control No. (1-86) 1910-1400 1. TITLE 2. IDENTIFICATION NUMBER 3. PARTICIPANT NAME AND ADDRESS 4. LABOR PLAN DATE 5. START DATE 6. COMPLETION DATE 7. 8. 9. Plan 10. Actual 11. 12. 13. Sub- 14. Element Reporting Prior Prior sequent Total Code Element Fiscal Fiscal Fiscal Year Year Years CURRENT FISCAL YEAR FUTURE FISCAL YEARS Total 15. TOTAL 16. LABOR EXPRESSED IN: 17. SIGNATURE OF PARTICIPANT'S PROJECT MANAGER AND DATE LABOR PLAN PURPOSE A baseline plan to allocate direct labor to each reporting element required by the contractual agreement. INSTRUCTIONS Item 1. Enter the title as it appears in the official document establishing the Item 11. In the blocks heading each column, identify the reporting periods

218

DOE Form 1332.7  

NLE Websites -- All DOE Office Websites (Extended Search)

7# 7# COST PLAN OMB Control No. (12-85) 1910-1400 1. TITLE 2. IDENTIFICATION NUMBER 3. PARTICIPANT NAME AND ADDRESS 4. COST PLAN DATE 5. START DATE 6. COMPLETION DATE 7. 8. 9. Plan 10. Actual 11. 12. 13. Sub- 14. Element Reporting Prior Prior sequent Total Code Element Fiscal Fiscal Fiscal Year Year Years CURRENT FISCAL YEAR FUTURE FISCAL YEARS Total 15. TOTAL 16. DOLLARS EXPRESSED IN: 17. SIGNATURE OF PARTICIPANT'S PROJECT MANAGER AND DATE 18. SIGNATURE OF PARTICIPANT'S AUTHORIZED FINANCIAL REPRESENTATIVE AND DATE COST PLAN PURPOSE A baseline plan to allocate costs to each reporting element required by the contractual agreement. INSTRUCTIONS Item 1. Enter the contractual agreement title as it appears in the official

219

Outlook: The Next Twenty Years  

E-Print Network (OSTI)

all this discussion, the outlook for the next twenty yearsLBNL-54470 OUTLOOK: THE NEXT TWENTY YEARS H. MURAYAMAUniversity of California. OUTLOOK: THE NEXT TWENTY YEARS H.

Murayama, Hitoshi

2009-01-01T23:59:59.000Z

220

Year 2000: energy enough  

SciTech Connect

The growing needs for energy in the U.S. are reviewed, and it is predicted that energy supplies will need be more than doubled by the year 2000. The solution lies in three areas: goal targeting, resource management, and timing. A no-growth economy and an economy continuing growth at an appropriate rate are two scenarios discussed. The second major area of choice in fixing energy capabilities for the year 2000 involves management of fuel resources. Shortages of oil and gas dictate that the increase in energy consumption be changed to coal and uranium, both of which are available domestically; utilization of these energy sources will mean increased electrification. It is concluded, then, that the best avenues toward ensuring a national energy supply are utilization of coal and uranium and the practice of energy conservation through greater efficiency. Timing is the third critical area of decision making that affects future energy supply. The long lead time required to bring about a change in the national energy mix is cited. Current estimates indicate that now is the time to push toward a national electricity target of at least 7500 billion kWh for the year 2000. Meeting the target means almost four times the present electricity supply, at a growth rate of about 5.7 percent per year. This target assumes a reasonable measure of energy conservation. (MCW)

Starr, C.

1976-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "form eia-860m year" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Fiscal Year Justification of  

E-Print Network (OSTI)

, epidemiology, laboratory services strengthen support for state, tribal, local, and territorial public healthDEPARTMENT of HEALTH and HUMAN SERVICES Fiscal Year 2012 Justification of Estimates Justification is one of several documents that fulfill the Department of Health and Human Services` (HHS

222

Mo Year Report Period: EIA ID NUMBER:  

U.S. Energy Information Administration (EIA) Indexed Site

Version No: 2013.01 Mo Year Report Period: EIA ID NUMBER: http://www.eia.gov/survey/form/eia_14/instructions.pdf Mailing Address: Secure File Transfer option available at: (e.g., PO Box, RR) https://signon.eia.doe.gov/upload/noticeoog.jsp Electronic Transmission: The PC Electronic Zip Code - Data Reporting Option (PEDRO) is available. If interested in software, call (202) 586-9659. Email form to: OOG.SURVEYS@eia.doe.gov - - - - Fax form to: (202) 586-9772 Mail form to: Oil & Gas Survey Email address: U.S. Department of Energy Ben Franklin Station PO Box 279 Washington, DC 20044-0279 Questions? Call toll free: 1-800-638-8812 PADD 4 Type of Report (Check One ): (Thousands of dollars) (Thousands of barrels) PADD 2 PADD 3 PAD DISTRICT (a) Revision to Report:

223

Through the years  

NLE Websites -- All DOE Office Websites (Extended Search)

Through the years Through the years Early 1960s Researchers at PNL (now called PNNL) developed the standards and devices for setting and measuring radiation doses received by nuclear industry work- ers. Tens of thousands of people, including children, have been mea- sured by whole-body counters since the 1960s to relate their physical content of radioactive materials to sources such as food and water. 1960s PNL formulated the first use of a digital computer for complete process control of a mass spectrometer. Mid-1960s PNL devised a computer code, called COBRA for COolant Boiling in Rod Arrays, which allowed for three-dimensional, multiphase hydrothermal modeling of reactor and other complex systems. 1967 PNL researchers continued the fundamental scientific and

224

DOE Headquarters FOIA Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Oak Ridge Office FOIA Request Form Oak Ridge Office FOIA Request Form To make an Electronic FOIA (E-FOIA) request, please provide the information below. Failure to enter accurate and complete information may render your FOIA request impossible to fulfill. * Requests submitted under the Privacy Act must be signed and, therefore, cannot be submitted on this form. Name: (Required) Organization: Address: (Required) Phone: FAX: Email: Reasonably Describe Records Describe the specific record (s) you seek with sufficient detail that a knowledgeable official of the activity may locate the record with a reasonable amount of effort. Such detail should include: dates, titles, file designations, and offices to be searched. Since most DOE records are not retained permanently, the more information that you provide, the better the opportunity there is to determine if the

225

EIA-412 Form and Instructions  

U.S. Energy Information Administration (EIA) Indexed Site

12 (2003) 12 (2003) ANNUAL ELECTRIC INDUSTRY FINANCIAL REPORT Form Approved OMB No. 1905-0129 Approval Expires 11/30/04 GENERAL INFORMATION PURPOSE Form EIA-412 collects accounting, plant statistics, and transmission data from various electric industry entities in the United States. The data from this report appear in the following EIA publications: Financial Statistics of Major U.S. Publicly Owned Electric Utilities and Electric Power Annual. The data collected on this form are used to monitor the current status and trends of the electric power industry and to evaluate the future of the industry. REQUIRED RESPONDENTS The accounting data (Schedules 1 through 8) are to be completed by each municipality, political subdivision, State, and Federal entity engaged in the generation,

226

Radiation Safety Work Control Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Radiation Safety Work Control Form Radiation Safety Work Control Form (see instructions on pg-2) Rev July-2012 Area: Form #: Date: Preliminary Applicability Screen: (a) Will closing the beam line injection stoppers mitigate the radiological hazards introduced by the proposed work? Yes No (b) Can the closed state of the beam line injection stoppers be assured during the proposed work (ie., work does NOT involve injection stoppers or associated HPS)? Yes No If the answers to both questions are yes, the work can be performed safely under an SSRL RSWCF. If the answer to either question is no, then the work must be performed under a SPEAR3 RSWCF. Section 1: Description of work to be done, including date and time. (Person Responsible completes section)

227

Method of forming structural heliostat  

DOE Patents (OSTI)

In forming a heliostat having a main support structure and pivoting and tilting motors and gears and a mirror module for reflecting solar energy onto a collector, the improvement characterized by a method of forming the mirror module in which the mirror is laid upon a solid rigid supporting bed in one or more sections, with or without focusing; a mirror backing sheet is applied by first applying respective thin layers of silicone grease and, thereafter, progressively rolling application to eliminate air bubbles; followed by affixing of a substrate assembly to the mirror backing sheet to form a mirror module that does not curve because of thermally induced stresses and differential thermal expansion or contraction effects. The silicone grease also serves to dampen fluttering of the mirror and protect the mirror backside against adverse effects of the weather. Also disclosed are specific details of preferred embodiments.

Anderson, Alfred J. (Littleton, CO)

1984-06-26T23:59:59.000Z

228

Substrate system for spray forming  

SciTech Connect

A substrate system for receiving a deposit of sprayed metal droplets including a movable outer substrate on which the sprayed metal droplets are deposited. The substrate system also includes an inner substrate disposed adjacent the outer substrate where the sprayed metal droplets are deposited on the outer substrate. The inner substrate includes zones of differing thermal conductivity to resist substrate layer porosity and to resist formation of large grains and coarse constituent particles in a bulk layer of the metal droplets which have accumulated on the outer substrate. A spray forming apparatus and associated method of spray forming a molten metal to form a metal product using the substrate system of the invention is also provided.

Chu, Men G. (Export, PA); Chernicoff, William P. (Harrisburg, PA)

2000-01-01T23:59:59.000Z

229

Substrate system for spray forming  

DOE Patents (OSTI)

A substrate system for receiving a deposit of sprayed metal droplets including a movable outer substrate on which the sprayed metal droplets are deposited. The substrate system also includes an inner substrate disposed adjacent the outer substrate where the sprayed metal droplets are deposited on the outer substrate. The inner substrate includes zones of differing thermal conductivity to resist substrate layer porosity and to resist formation of large grains and coarse constituent particles in a bulk layer of the metal droplets which have accumulated on the outer substrate. A spray forming apparatus and associated method of spray forming a molten metal to form a metal product using the substrate system of the invention is also provided.

Chu, Men G. (Export, PA); Chernicoff, William P. (Harrisburg, PA)

2002-01-01T23:59:59.000Z

230

PROCESS OF FORMING POWDERED MATERIAL  

DOE Patents (OSTI)

A process of forming high-density compacts of a powdered ceramic material is described by agglomerating the powdered ceramic material with a heat- decompossble binder, adding a heat-decompossble lubricant to the agglomerated material, placing a quantity of the material into a die cavity, pressing the material to form a compact, pretreating the compacts in a nonoxidizing atmosphere to remove the binder and lubricant, and sintering the compacts. When this process is used for making nuclear reactor fuel elements, the ceramic material is an oxide powder of a fissionsble material and after forming, the compacts are placed in a cladding tube which is closed at its ends by vapor tight end caps, so that the sintered compacts are held in close contact with each other and with the interior wall of the cladding tube.

Glatter, J.; Schaner, B.E.

1961-07-14T23:59:59.000Z

231

LFS Subcontract Form of Agreement  

NLE Websites -- All DOE Office Websites (Extended Search)

SFA (Rev. 5, 4/5/13) Subcontract Form of Agreement SFA (Rev. 5, 4/5/13) Subcontract Form of Agreement Dated 5-20-13 Subcontract No. 241314 Page 1 of 2 Subcontract Form of Agreement Subcontractor: TBD Subcontract No.: 241314 Address: * Contact: * Telephone: * Facsimile: * E-mail: * D-U-N-S No.: * NAICS Code: 334111 This subcontract, effective on the date of signature by the last party to sign, is hereby made and entered into by and between Los Alamos National Security, LLC (CONTRACTOR), and the above named SUBCONTRACTOR who hereby agree that all Work specified below, which is a portion of the goods and services to be provided by CONTRACTOR for the United States Department of Energy National Nuclear Security Administration (OWNER), shall be performed by the SUBCONTRACTOR in accordance with all

232

Microsoft Word - FORM46002.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

MANAGEMENT REPORTING MANAGEMENT REPORTING Progress Report Special Status Report SCIENTIFIC/TECHNICAL REPORTING (Reports/Products must be submitted with appropriate DOE F 241. The 241 forms are available at www.osti.gov/elink.) Report/Product Form Final Scientific/Technical Report DOE F 241.3 Conference papers/proceedings* DOE F 241.3 Software/Manual DOE F 241.4 Other (see special instructions) DOE F 241.3 * Scientific and technical conferences only FINANCIAL REPORTING SF-269, Financial Status Report SF-269A, Financial Status Report (Short Form) SF-272, Federal Cash Transactions Report CLOSEOUT REPORTING Patent Certification Property Certification Other (see Special Instructions) OTHER REPORTING Other (see Special Instructions)

233

Sources: Energy Information Administration, Form EIA-182,  

Annual Energy Outlook 2012 (EIA)

Form EIA-182, "Domestic Crude Oil First Purchase Report"; Form EIA-856, "Monthly Foreign Crude Oil Acquisition Report"; and Form EIA-14, "Refiners' Monthly Cost Report." 0...

234

Opinion of Counsel Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Opinion of Counsel Form Opinion of Counsel Form For use with natural gas authorization filings Opinion of Counsel Form - Natural Gas Regulation...

235

ORPS User Registration Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ORPS User Registration Form ORPS User Registration Form August 09, 2007 Operational Event Information Systems Registration Form For Occurrence Reporting and Processing System ORPS...

236

Technology Transfer Reporting Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technology Transfer Reporting Form Technology Transfer Reporting Form Technology Transfer Reporting Form More Documents & Publications DOE F 3230.6A Technology Partnership...

237

TEPP - Exercise Evaluation Forms | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Forms Hazardous Materials Exercise Evaluation Forms Exercise Evaluation Forms More Documents & Publications TEPP - Spent Nuclear Fuel Radiography Device Soil DensityMoisture Gauge...

238

RRC Form H-11 | Open Energy Information  

Open Energy Info (EERE)

Page Edit with form History Facebook icon Twitter icon RRC Form H-11 Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Reference Material: RRC Form H-11 Details...

239

Paperclips Etc. Special Order Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PSS-02.2 (March 7, 2011) Replaces PSS-02.1 PSS-02.2 (March 7, 2011) Replaces PSS-02.1 PAPERCLIPS Etc. SPECIAL Orders Form This form is used to order supplies that are not readily available in the DOE HQ self-service supply stores or for items that require approval by Office Management. All supplies ordered MUST be used for Official Government Business only. Requestor's Name: ___________________________________________________ Date: __________________ Phone Number: __________________ DOE ID Badge No.: ________________________________________ Catalog Name: ______________________________________________________ Org Code: ______________ Item Number Page # Item Description Quantity Store Use Only ALL printed names (legible), signatures and dates are required before your Special order is processed.

240

U.S. Department of Energy Natural Gas Imports and Exports Form...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Natural Gas Imports and Exports Form FE-746R Expiration Date: 7312016 AVG Burden: 3.0 hours MonthYear: Exporter (Authorization Holder):...

Note: This page contains sample records for the topic "form eia-860m year" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

WELLNESS LIFESTYLE AGREEMENT COMMITMENT FORM  

E-Print Network (OSTI)

WELLNESS LIFESTYLE AGREEMENT COMMITMENT FORM The Wellness Lifestyle Program is located in Reynolds will actively participate in the wellness program to make Reynolds Hall a healthy and supportive place or more consequences: conduct referral; administrative removal from the Wellness Program and

Weston, Ken

242

Spin-forming Project Report  

Science Conference Proceedings (OSTI)

In a second development order, spin-forming equipment was again evaluated using the test shape, a hemispherical shell. In this second development order, pure vanadium and alloy titanium (Ti-6Al-4V) were spin-formed, as well as additional copper and 21-6-9 stainless. In the first development order the following materials had been spin-formed: copper (alloy C11000 ETP), 6061 aluminum, 304L stainless steel, 21-6-9 stainless steel, and tantalum-2.5% tungsten. Significant challenges included properly adjusting the rotations-per-minute (RPM), cracking at un-beveled edges and laser marks, redressing of notches, surface cracking, non-uniform temperature evolution in the titanium, and cracking of the tailstock. Lessons learned were that 300 RPM worked better than 600 RPM for most materials (at the feed rate of 800 mm/min); beveling the edges to lower the stress reduces edge cracking; notches, laser marks, or edge defects in the preform doom the process to cracking and failure; coolant is required for vanadium spin-forming; increasing the number of passes to nine or more eliminates surface cracking for vanadium; titanium develops a hot zone in front of the rollers; and the tailstock should be redesigned to eliminate the cylindrical stress concentrator in the center.

Switzner, Nathan; Henry, Dick

2009-03-20T23:59:59.000Z

243

A simple proof of Jordan normal form  

E-Print Network (OSTI)

In this note, a simple proof Jordan normal form and rational form of matrices over a field is given.

Chen, Yuqun

2011-01-01T23:59:59.000Z

244

CONTACTS FOR INFORMATION MANAGEMENT: Forms, Information Collection...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CONTACTS FOR INFORMATION MANAGEMENT: Forms, Information Collection (PRA), & Records CONTACTS FOR INFORMATION MANAGEMENT: Forms, Information Collection (PRA), & Records Name Contact...

245

INDEPENDENT STUDENT SPECIAL CIRCUMSTANCES APPEAL Academic Year 20102011INSTRUCTIONS AND FORM  

E-Print Network (OSTI)

, testimonies, reports IL Commission on Intergovernmental Cooperation re: impact of new AFDC Policies on working

Dahlberg, E. Dan

246

INDEPENDENT STUDENT SPECIAL CIRCUMSTANCES APPEAL Academic Year 2012-2013INSTRUCTIONS AND FORM  

E-Print Network (OSTI)

maintenance 8. Child support 9. Welfare benefits (such as AFDC or TANF) 10. Veterans benefits 11. Social

Amin, S. Massoud

247

DEPENDENT STUDENT SPECIAL CIRCUMSTANCES APPEAL Academic Year 20122013INSTRUCTIONS AND FORM  

E-Print Network (OSTI)

maintenance 9. Child support 10. Welfare benefits (such as AFDC or TANF) 11. Veterans benefits 12. Social

Amin, S. Massoud

248

DEPENDENT STUDENT SPECIAL CIRCUMSTANCES APPEAL Academic Year 20102011INSTRUCTIONS AND FORM  

E-Print Network (OSTI)

AFDC recipients were eligible for Medicaid. After 1996, the automatic link between welfare and Medicaid was broken. However, Medicaid eligibility was mandated for those who met the AFDC requirements in effect

Dahlberg, E. Dan

249

INDEPENDENT STUDENT SPECIAL CIRCUMSTANCES APPEAL Academic Year 20112012INSTRUCTIONS AND FORM  

E-Print Network (OSTI)

maintenance 8. Child support 9. Welfare benefits (such as AFDC or TANF) 10. Veterans benefits 11. Social

Amin, S. Massoud

250

DEPENDENT STUDENT SPECIAL CIRCUMSTANCES APPEAL Academic Year 20112012INSTRUCTIONS AND FORM  

E-Print Network (OSTI)

maintenance 9. Child support 10. Welfare benefits (such as AFDC or TANF) 11. Veterans benefits 12. Social

Amin, S. Massoud

251

2011Form EIA-902 Instructions  

U.S. Energy Information Administration (EIA) Indexed Site

FORM EIA-902 ANNUAL GEOTHERMAL HEAT PUMP SHIPMENTS REPORT GENERAL INFORMATION AND INSTRUCTIONS I. Purpose Form EIA-902 is designed to provide the data necessary for the U.S. Energy Information Administration (EIA), a part of the U.S. Department of Energy (DOE), to carry out its responsibilities tracking heat pump shipments in the geothermal heat pump industry and reporting information concerning the size and status of the industry. The data collected will be published in the Renewable Energy Annual and also be available through EIA's Internet site at http://www.eia.gov/fuelrenewable.html. II. Who Should Respond to This Survey This report is mandatory and required pursuant to the authority granted to the Department of Energy (DOE) by the Federal Energy Information Administration Act of 1974 (Public Law 93-

252

Method of forming clathrate ice  

DOE Patents (OSTI)

A method of forming clathrate ice in a supercooled water-based liquid contained in a vessel is disclosed. Initially, an oscillator device is located in the liquid in the vessel. The oscillator device is then oscillated ultrasonically so that small crystals are formed in the liquid. These small crystals serve as seed crystals for ice formation in the liquid and thereby prevent supercooling of the liquid. Preferably, the oscillating device is controlled by a thermostat which initiates operation of the oscillator device when the temperature of the liquid is lowered to the freezing point. Thereafter, the operation of the oscillator device is terminated when ice is sensed in the liquid by an ice sensor.

Hino, Toshiyuki (Tokyo, JP); Gorski, Anthony J. (Lemont, IL)

1987-01-01T23:59:59.000Z

253

Method of forming calthrate ice  

DOE Patents (OSTI)

A method of forming clathrate ice in a supercooled water-based liquid contained in a vessel is disclosed. Initially, an oscillator device is located in the liquid in the vessel. The oscillator device is then oscillated ultransonically so that small crystals are formed in the liquid. Thes small crystals serve as seed crystals for ice formation in the liquid and thereby prevent supercooling of the liquid. Preferably, the oscillating device is controlled by a thermostat which initiates operation of the oscillator device when the temperature of the liquid is lowered to the freezing point. Thereafter, the operation of the oscillator device is terminated when ice is sensed in the liquid by an ice sensor.

Hino, T.; Gorski, A.J.

1985-09-30T23:59:59.000Z

254

DOE Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

U.S. Department of Energy Categorical Exclusion Determination Form Program or Field Office: Energy Efficiency and Conservation Block Grant Program Project Title CA-TRIBE-LOS COYOTES BAND OF CAHUILLA AND CUPENO INDIANS Location: Tribe CA-TRIBE-LOS COYOTES BAND OF CAHUILLA AND CUPENO INDIANS CA American Recovery and Reinvestment Act: Proposed Action or Project Description The Los Coyotes Band of Cahuilla and Cupeno Indians of California proposes to replace tribal members'

255

DOE Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

U.S. Department of Energy Categorical Exclusion Determination Form Program or Field Office: TRIBAL ENERGY PROGRAM Project Title SD-TEP-ROSEBUD SIOUX TRIBE Location: Tribal ROSEBUD SIOUX TRIBE SD American Recovery and Reinvestment Act: Proposed Action or Project Description The Rosebud Sioux Tribe (RST) and Citizens Wind propose to complete the required pre-construction activities necessary to secure funding for the proposed 190 MW North Antelope Highlands wind farm,

256

DOE Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

U.S. Department of Energy Categorical Exclusion Determination Form Program or Field Office: TRIBAL ENERGY PROGRAM NV Project Title NV-TEP-FALLON PAIUTE-SHOSHONE Location: Tribal FALLON PAIUTE-SHOSHONE American Recovery and Reinvestment Act: Proposed Action or Project Description The Fallon Paiute-Shoshone Tribe proposes to develop a sustainable energy park utilizing renewable energy resources at the Tribe's Reservation in Churchill County, Nevada. This proposed energy park

257

DOE Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

U.S. Department of Energy Categorical Exclusion Determination Form Program or Field Office: TRIBAL ENERGY PROGRAM OK Project Title OK-TEP-CHEROKEE NATION BUSINESSES Location: Tribal CHEROKEE NATION BUSINESSES American Recovery and Reinvestment Act: Proposed Action or Project Description The Cherokee Wind Energy Development proposed project is for development, design, and installation of a 127.5 megawatt wind farm to offset Tribal electrical load; sell excess electricity to local, regional, and

258

Weak Energy: Form and Function  

E-Print Network (OSTI)

The equation of motion for a time-independent weak value of a quantum mechanical observable contains a complex valued energy factor - the weak energy of evolution. This quantity is defined by the dynamics of the pre-selected and post-selected states which specify the observable's weak value. It is shown that this energy: (i) is manifested as dynamical and geometric phases that govern the evolution of the weak value during the measurement process; (ii) satisfies the Euler-Lagrange equations when expressed in terms of Pancharatnam (P) phase and Fubini-Study (FS) metric distance; (iii) provides for a PFS stationary action principle for quantum state evolution; (iv) time translates correlation amplitudes; (v) generalizes the temporal persistence of state normalization; and (vi) obeys a time-energy uncertainty relation. A similar complex valued quantity - the pointed weak energy of an evolving state - is also defined and several of its properties in PFS-coordinates are discussed. It is shown that the imaginary part of the pointed weak energy governs the state's survival probability and its real part is - to within a sign - the Mukunda-Simon geometric phase for arbitrary evolutions or the Aharonov-Anandan (AA) phase for cyclic evolutions. Pointed weak energy gauge transformations and the PFS 1-form are discussed and the relationship between the PFS 1-form and the AA connection 1-form is established.

Allen D. Parks

2013-04-09T23:59:59.000Z

259

Photon Sciences Directorate | 2010 Annual Report | Year In Review  

NLE Websites -- All DOE Office Websites (Extended Search)

Year In Review The NSLS-II construction site transformed from a field of dirt to a fully formed steel ring half a mile in circumference, a new education program introduced a...

260

Calendar Year 2013  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3 Office of Inspector General 
1000 3 Office of Inspector General 
1000 Independence Avenue, SW 
 Washington, DC 20585 202-586-4128 en Audit Report: OAS-FS-14-03 http://energy.gov/ig/downloads/audit-report-oas-fs-14-03 Audit Report: OAS-FS-14-03

Note: This page contains sample records for the topic "form eia-860m year" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

2013 Director's New Year Address  

NLE Websites -- All DOE Office Websites (Extended Search)

Director's New Year Address 2013 Director's New Year Address Print Looking Forward and Celebrating 20 Years in 2013 falocne We recently sat down with ALS Director Roger Falcone to...

262

SLAC Dosimeter / ID Request Form A  

NLE Websites -- All DOE Office Websites (Extended Search)

Feb 2009 (updated 13 May 2010) SLAC-I-760-0A07J-006-R010 1 of 2 Feb 2009 (updated 13 May 2010) SLAC-I-760-0A07J-006-R010 1 of 2 SLAC Dosimeter / ID Request Form A (For applicants who have completed SLAC Environment, Safety, and Health Training) Sections 1-5 completed by applicant. Section 1: Contact Information Last name: First name: MI: Male Female Birth year (yyyy): Job title: Contact information/mailing address: City: State: Zip code: Country: Dept/Group: Phone number: Mail stop: Users or non-SLAC employees only: List employer, company, or university : Section 2: Identification Badge Request I am applying for my first SLAC identification badge; I have successfully completed the following ES&H training (indicate all that apply): SON SOC EOESH GERT RWT I RWT II

263

Residential Commercial Industrial Year  

Gasoline and Diesel Fuel Update (EIA)

4 4 Residential Commercial Industrial Year and State Volume (million cubic feet) Consumers Volume (million cubic feet) Consumers Volume (million cubic feet) Consumers 2000 Total ................... 4,996,179 59,252,728 3,182,469 5,010,817 8,142,240 220,251 2001 Total ................... 4,771,340 60,286,364 3,022,712 4,996,446 7,344,219 217,026 2002 Total ................... 4,888,816 61,107,254 3,144,169 5,064,384 7,507,180 205,915 2003 Total ................... R 5,079,351 R 61,871,450 R 3,179,493 R 5,152,177 R 7,150,396 R 205,514 2004 Total ................... 4,884,521 62,469,142 3,141,653 5,135,985 7,250,634 212,191 Alabama ...................... 43,842 806,175 26,418 65,040 169,135 2,800 Alaska.......................... 18,200 104,360 18,373 13,999 46,580 10 Arizona ........................

264

WMAP First Year Results  

E-Print Network (OSTI)

The Wilkinson Microwave Anisotropy Probe (WMAP) science team has released results from the first year of operation at the Earth-Sun L2 Lagrange point. The maps are consistent with previous observations but have much better sensitivity and angular resolution than the COBE DMR maps, and much better calibration accuracy and sky coverage than ground-based and balloon-borne experiments. The angular power spectra from these ground-based and balloon-borne experiments are consistent within their systematic and statistical uncertainties with the WMAP results. WMAP detected the large angular-scale correlation between the temperature and polarization anisotropies of the CMB caused by electron scattering since the Universe became reionized after the "Dark Ages", giving a value for the electron scattering optical depth of 0.17+/-0.04. The simplest Lambda-CDM model with n=1 and Omega_tot=1 provides an adequate fit to the WMAP data and gives parameters which are consistent with determinations of the Hubble constant and observations of the accelerating Universe using supernovae. The time-ordered data, maps, and power spectra from WMAP can be found at http://lambda.gsfc.nasa.gov along with 13 papers by the WMAP science team describing the results in detail.

E. L. Wright

2003-06-05T23:59:59.000Z

265

DOE Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

U.S. Department of Energy Categorical Exclusion Determination Form Program or Field Office: TRIBAL ENERGY PROGRAM NV Project Title NV-TEP-WASHOE WISK'E'EM PROJECT Location: Tribal WASHOE WISK'E'EM PROJECT American Recovery and Reinvestment Act: Proposed Action or Project Description The Washoe Tribe of Nevada and California (Washoe Tribe) proposes to install four small (approximately 1.0-1.5 kW) vertical wind turbines at designated locations on Tribal lands to offset energy costs for the

266

FORMING PROTECTIVE FILMS ON METAL  

DOE Patents (OSTI)

Methods are described of inhibiting the corrosion of ferrous metal by contact with heavy liquid metals such as bismuth and gallium at temperatures above 500 icient laborato C generally by bringing nltrogen and either the metal zirconium, hafnium, or titanium into reactlve contact with the ferrous metal to form a thin adherent layer of the nitride of the metal and thereafter maintaining a fractional percentage of the metal absorbed in the heavy liquid metal in contact with the ferrous metal container. The general purpose for uslng such high boiling liquid metals in ferrous contalners would be as heat transfer agents in liquid-metal-fueled nuclear reactors.

Gurinsky, D.H.; Kammerer, O.F.; Sadofsky, J.; Weeks, J.R.

1958-12-16T23:59:59.000Z

267

Integrally formed radio frequency quadrupole  

DOE Patents (OSTI)

An improved radio frequency quadrupole (10) is provided having an elongate housing (11) with an elongate central axis (12) and top, bottom and two side walls (13a-d) symmetrically disposed about the axis, and vanes (14a-d) formed integrally with the walls (13a-d), the vanes (14a-d) each having a cross-section at right angles to the central axis (12) which tapers inwardly toward the axis to form electrode tips (15a-d) spaced from each other by predetermined distances. Each of the four walls (13a-d), and the vanes (14a-d) integral therewith, is a separate structural element having a central lengthwise plane (16) passing through the tip of the vane, the walls (13a-d) having flat mounting surfaces (17, 18) at right angles to and parallel to the control plane (16), respectively, which are butted together to position the walls and vane tips relative to each other.

Abbott, Steven R. (Concord, CA)

1989-01-01T23:59:59.000Z

268

FermiCulture Subscription Form  

NLE Websites -- All DOE Office Websites (Extended Search)

The FermiCulture email list is used to send email announcements and reminders about upcoming cultural events at Fermilab (e.g., the Fermilab Arts, Film, and Lecture series). This is a private, announcement-only mail list and will never be used for spamming or discussions. Subscribers receive approximately five emails per month. Use the form below to subscribe to (or unsubscribe from) the FermiCulture list. The FermiCulture email list is used to send email announcements and reminders about upcoming cultural events at Fermilab (e.g., the Fermilab Arts, Film, and Lecture series). This is a private, announcement-only mail list and will never be used for spamming or discussions. Subscribers receive approximately five emails per month. Use the form below to subscribe to (or unsubscribe from) the FermiCulture list. Email address: Name (First Last): Subscribe to email list Unsubscribe from email list Send Reset The Regular Mailing List If you would like to receive mailings through the regular mail of upcoming cultural events at Fermilab and are not on our mailing list, then please fill out the information below. Name: Address: City: State: Zip: Country: E-mail:

269

Projects of the year  

SciTech Connect

The Peabody Hotel, Orlando, Florida was the site of Power Engineering magazine's 2006 Projects of the Year Awards Banquet, which kicked-off the Power-Gen International conference and exhibition. The Best Coal-fired Project was awarded to Tri-State Generation and Transmission Association Inc., owner of Springenville Unit 3. This is a 400 MW pulverized coal plant in Springeville, AZ, sited with two existing coal-fired units. Designed to fire Powder River Basin coal, it has low NOx burners and selective catalytic reduction for NOx control, dry flue gas desulfurization for SO{sub 2} control and a pulse jet baghouse for particulate control. It has a seven-stage feedwater heater and condensers to ensure maximum performance. Progress Energy-Carolinas' Asheville Power Station FGD and SCR Project was awarded the 2006 coal-fired Project Honorable Mention. This plant in Skyland, NC was required to significantly reduce NOx emissions. When completed, the improvements will reduce NOx by 93% compared to 1996 levels and SO{sub 2} by 93% compared to 2001 levels. Awards for best gas-fired, nuclear, and renewable/sustainable energy projects are recorded. The Sasyadko Coal-Mine Methane Cogeneration Plant near Donezk, Ukraine, was given the 2006 Honorable Mention for Best Renewable/Sustainable Energy Project. In November 2004, Ukraine was among 14 nations to launch the Methane to Markets partnership. The award-winning plant is fuelled by methane released during coal extraction. It generates 42 MW of power. 4 photos.

Hansen, T.

2007-01-15T23:59:59.000Z

270

Efficient pairing computation on Elliptic curves in Hessian form  

Science Conference Proceedings (OSTI)

Pairings in elliptic curve cryptography are functions which map a pair of elliptic curve points to a non-zero element of a finite field. In recent years, many useful cryptographic protocols based on pairings have been proposed. The fast implementations ... Keywords: Elliptic curve, Hessian form, tate paring

Haihua Gu; Dawu Gu; WenLu Xie

2010-12-01T23:59:59.000Z

271

DUF6 EIS Public Comment Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Public Comment Form Public Comment Form The public comment period for the Depleted UF6 Supplemental Analysis is closed. The public comment form is no longer available. Sorry The...

272

CAIRS Registration Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

HSS InfoCenter at (301) 903-9823 CAIRS Registration Form More Documents & Publications ORPS User Registration Form Fire Protection System Account Request Form Policy Flash 2013-15...

273

How is an egg shell formed?  

NLE Websites -- All DOE Office Websites (Extended Search)

How is an egg shell formed? Name: Tim Location: NA Country: NA Date: NA Question: How is an egg shell formed? Replies: Egg shells are formed by a complex interaction between a...

274

Form:Property | Open Energy Information  

Open Energy Info (EERE)

Form Edit History Facebook icon Twitter icon Form:Property Jump to: navigation, search Form to create Properties. Enter a name and the Property will be created in Property...

275

Document Control Template-Form  

NLE Websites -- All DOE Office Websites (Extended Search)

4 Publication Review and Approval 11_0608.doc608 Page 1 of 3 4 Publication Review and Approval 11_0608.doc608 Page 1 of 3 EOTA - Business Form Document Title: Publication Review and Approval Document Number: ITTF-014 Rev. 11_0608 Document Owner: Ben Aragon Backup Owner: Janet Lee Approver(s): Melissa Otero Parent Document: ITTP-015 Website Development Maintenance Notify of Changes: EOTA Employees Referenced Document(s): N/A ITTF-014 Publication Review and Approval 11_0608.doc608 Page 2 of 3 Revision History: Rev. Description of Changes A Initial Release 08_0523 Added review section for QA. Added "Approved w/changes" section. Changed "Corrections" and "Reason" to "Recommendations". Adjusted spacing on document. 08_1105 Added review section for Project Manager. Adjusted spacing on document.

276

Labor Standards Interview Form | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Standards Interview Form Labor Standards Interview Form SF 1445.pdf More Documents & Publications Labor Standards for Construction Chapter 22 - Labor Standards for Construction CRB...

277

DOE Forms Management FAQ's | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Departmental Form (developed for use department-wide by DOE personnel only) Headquarters (HQ) Form (developed or managed by a DOE Headquarters organization and are generally for...

278

Fermilab at Work | Manuals and Forms  

NLE Websites -- All DOE Office Websites (Extended Search)

Performance Appraisal Forms Procedures for Researchers (PFX) Records Storage (RSD) Form Safety Manuals Time and Labor Reporting Tune IT Up Travel Policies Last modified: 0220...

279

Change Request Forms | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Link - Under Development NMMSS Change of Authorized Contacts Response Form (Last updated: August 14, 2013) NMMSS Change of Project Number Response Form (Last updated: August 14,...

280

Form:Utility Rate | Open Energy Information  

Open Energy Info (EERE)

Form Edit History Facebook icon Twitter icon Form:Utility Rate Jump to: navigation, search Add or Update Utility Rate Information Retrieved from "http:en.openei.orgw...

Note: This page contains sample records for the topic "form eia-860m year" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Form:ExplorationActivity | Open Energy Information  

Open Energy Info (EERE)

Form Edit History Facebook icon Twitter icon Form:ExplorationActivity Jump to: navigation, search Input a name below to add an "Exploration Activity'. If the activity already...

282

RRC Form H-1 | Open Energy Information  

Open Energy Info (EERE)

Login | Sign Up Search Page Edit with form History Facebook icon Twitter icon RRC Form H-1 Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Reference...

283

Neutron capture therapy: Years of experimentation---Years of reflection  

Science Conference Proceedings (OSTI)

This report describes early research on neutron capture therapy over a number of years, beginning in 1950, speaking briefly of patient treatments but dwelling mostly on interpretations of our animal experiments. This work carried out over eighteen years, beginning over forty years ago. Yet, it is only fitting to start by relating how neutron capture therapy became part of Brookhaven's Medical Research Center program.

Farr, L.E.

1991-12-16T23:59:59.000Z

284

Canonical Forms for Symmetric and Regular Structures  

Science Conference Proceedings (OSTI)

Matrices associated with symmetric and regular structures can be arranged into certain block patterns known as Canonical forms. Using such forms, the decomposition of structural matrices into block diagonal forms, is considerably simplified. In this ... Keywords: 15A18, 74S05, Block diagonalization, Decomposition, Group theory, Matrix canonical form, Regular structure, Symmetric structure

Ali Kaveh; H. Fazli

2012-06-01T23:59:59.000Z

285

Environmental Degradation Nuclear IX-Housing Form  

Science Conference Proceedings (OSTI)

ENVIRONMENTAL DEGRADATION OF MATERIALS IN NUCLEAR POWER SYSTEMSWATER REACTORS. HOUSING. RESERVATION FORM.

286

Introduction: Twenty Years of ACCESS  

E-Print Network (OSTI)

vision of future priorities in transportation research ands 20th Transportation Center. A year ago, UCTCs future, and

Cervero, Robert

2012-01-01T23:59:59.000Z

287

EIA - 2008 New Electric Power Forms  

Gasoline and Diesel Fuel Update (EIA)

New Electricity Survey Forms New Electricity Survey Forms What's happening with electric power forms? In 2008 EIA is consolidating 6 data collection forms into 2 forms. Fill out forms electronically (Available soon!) Not registered? Why is that a good thing? * For Electricity Generators: This reduces the number of forms to submit. (Re-registering is not required!) * For EIA and Taxpayers: This streamlines the collection process for better efficiency. * For Everyone: This enables us to provide additional information about the electric power industry. figure showing what electricity forms merge into the new forms Click for more information on the New EIA-860 Click for more information on the New EIA-923 Resources to help you with the changes Printable Forms & Instructions 923 860

288

Neutron capture therapy: Years of experimentation---Years of reflection  

SciTech Connect

This report describes early research on neutron capture therapy over a number of years, beginning in 1950, speaking briefly of patient treatments but dwelling mostly on interpretations of our animal experiments. This work carried out over eighteen years, beginning over forty years ago. Yet, it is only fitting to start by relating how neutron capture therapy became part of Brookhaven`s Medical Research Center program.

Farr, L.E.

1991-12-16T23:59:59.000Z

289

Property:EndYear | Open Energy Information  

Open Energy Info (EERE)

Property Property Edit with form History Facebook icon Twitter icon » Property:EndYear Jump to: navigation, search This is a property of type Date. The allowed values for this property are: 2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 1988 1987 1986 1985 1984 1983 1982 1981 Pages using the property "EndYear" Showing 25 pages using this property. (previous 25) (next 25) A ASEAN-GIZ Regional Environmentally Sustainable Cities Programme - RESCP + 2012 + Africa - CCS capacity building + 2011 + Algeria-DLR Resource Assessments + 2008 + B Bangladesh-DLR Resource Assessments + 2004 + Bangladesh-GTZ Renewable Energy and Energy Efficiency Programme + 2011 + Belize-OAS Cellulosic Ethanol Market Assessment + 2009 +

290

Selection of a form for fixation of iodine-129  

Science Conference Proceedings (OSTI)

This report summarizes work on the selection of an /sup 129/I disposal form. Iodine compounds have been screened on the basis of solubilities, thermal stabilities, cost and availability, toxicity of the cation, and the thermodynamic resistance to oxidation and hydrolysis, and leaching of that compound in portland type III cement. Also considered were iodine capture technology, disposal criteria or guidelines, and the disposal site/strategy. The recommended iodine fixation forms, based on their leach resistance and chemical stability and contingent on the disposal strategy/site and capture technique, are silver iodide in cement and barium, calcium, or strontium, and mercuric iodates in cement. Iodine sodalite appears promising and merits further study. If compatible with disposal requirements, the recommended forms for Mercurex and Iodox are insoluble iodates in cement and for silver sorbents the sorbents in cement or AgI in cement. Conversion between the different oxidation states of iodine is feasible but complicates the iodine treatment. For the different disposal strategies, isotopic dilution or ocean disposal has the least stringent disposal form requirements. Any of the recommended forms should be suitable with proper site selection. Isolation in a geologic repository for thousands of years requires the disposal form to be thermally and chemically stable and resistant to leaching at elevated temperatures. Probably the best form studied for isolation is silver iodide in cement. For extraterrestrial disposal, the disposal form may have to withstand reentry impact and surface disposal in the event of an aborted mission; this assumes the capsule is not recovered. Thus the primary containment barrier is critical. The suggested iodine form for space disposal is a heavy metal iodide.

Burger, L.L.; Scheele, R.D.; Wiemers, K.D.

1981-12-01T23:59:59.000Z

291

Yearly  

E-Print Network (OSTI)

In 2009, a new activity was launched under the International Energy Agency Wind Implementing Agreement (IEA Wind) for the small wind sector. The main focus of this activity, called Task 27, is to develop recommended practices for consumer labeling of existing commercial small wind turbines. Participants will also exchange information about the status of the small wind industry in the member countries. This report outlines the status of the small wind sector in 2009 in the countries participating in Task 27. (For more information about IEA Wind and the consumer label developed under Task 27, see www.ieawind.org.)

unknown authors

2009-01-01T23:59:59.000Z

292

YEAR  

National Nuclear Security Administration (NNSA)

M) 15 Hispanic Female (H, F) 11 White Male (W, M) 49 White Female (W, F) 12 PAY PLAN DIVERSITY TOTAL WORKFORCE GENDER Los Alamos Field Office As of March 23, 2013 1.0% 9.4% 28.1%...

293

YEAR  

National Nuclear Security Administration (NNSA)

Female 0 Hispanic Male 1 Hispanic Female 0 White Male 28 White Female 6 Workforce Diversity Kansas City Site Office As of March 24, 2012 PAY PLAN TOTAL WORKFORCE GENDER...

294

YEAR  

National Nuclear Security Administration (NNSA)

29 Hispanic Male 220 Hispanic Female 202 White Male 1340 White Female 519 Workforce Diversity National Nuclear Security Administration As of March 24, 2012 PAY PLAN TOTAL...

295

YEAR  

National Nuclear Security Administration (NNSA)

M) 5 Hispanic Female (H, F) 4 White Male (W, M) 25 White Female (W, F) 17 PAY PLAN DIVERSITY TOTAL WORKFORCE GENDER Livermore Field Office As of March 23, 2013 1.2% 4.7% 3.5%...

296

YEAR  

National Nuclear Security Administration (NNSA)

7 Asian Female 6 Hispanic Male 8 Hispanic Female 7 White Male 128 White Female 83 DIVERSITY Workforce Diversity Immedidate Office of the Deputy Administrator (NA-20) As of...

297

YEAR  

National Nuclear Security Administration (NNSA)

M) 12 Hispanic Female (H, F) 11 White Male (W, M) 34 White Female (W, F) 16 PAY PLAN DIVERSITY TOTAL WORKFORCE GENDER Sandia Field Office As of March 23, 2013 2.5% 8.8% 13.8% 1.3%...

298

YEAR  

National Nuclear Security Administration (NNSA)

3 Asian Female 0 Hispanic Male 23 Hispanic Female 24 White Male 36 White Female 35 DIVERSITY Workforce Diversity Associate Administrator for Acquistion & Project Management...

299

YEAR  

National Nuclear Security Administration (NNSA)

White Male (W,M) 29 26 -10.34% White Female (W,F) 19 16 -15.79% Change DIVERSITY Change Livermore Field Office As of September 26, 2013 TOTAL WORKFORCE Change GENDER...

300

YEAR  

National Nuclear Security Administration (NNSA)

3 Asian Female 4 Hispanic Male 21 Hispanic Female 47 White Male 61 White Female 92 DIVERSITY Workforce Diversity Associate Administrator for Management & Budget, NA-MB As of Sep...

Note: This page contains sample records for the topic "form eia-860m year" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

YEAR  

National Nuclear Security Administration (NNSA)

Male 1 Asian Female 0 Hispanic Male 0 Hispanic Female 0 White Male 8 White Female 3 DIVERSITY Workforce Diversity As of March 24, 2012 PAY PLAN TOTAL WORKFORCE 9 64.3% 5 35.7%...

302

YEAR  

National Nuclear Security Administration (NNSA)

Female 4 Hispanic Male 5 Hispanic Female 4 White Male 30 White Female 19 Workforce Diversity Livermore Site Office As of March 24, 2012 PAY PLAN TOTAL WORKFORCE GENDER DIVERSITY...

303

YEAR  

National Nuclear Security Administration (NNSA)

Female (W, F) 474 Total includes 2561 permanent and 21 temporary employees. PAY PLAN DIVERSITY TOTAL WORKFORCE GENDER National Nuclear Security Administration As of March 23, 2013...

304

YEAR  

National Nuclear Security Administration (NNSA)

M) 74 Hispanic Female (H, F) 22 White Male (W, M) 393 White Female (W, F) 19 PAY PLAN DIVERSITY TOTAL WORKFORCE GENDER Assistant Deputy Administrator for Secure Transportation...

305

YEAR  

National Nuclear Security Administration (NNSA)

Female 1 Hispanic Male 0 Hispanic Female 1 White Male 46 White Female 22 Workforce Diversity Y-12 Site Office As of March 24, 2012 PAY PLAN TOTAL WORKFORCE DIVERSITY GENDER 51...

306

YEAR  

National Nuclear Security Administration (NNSA)

Female 0 Hispanic Male 0 Hispanic Female 3 White Male 9 White Female 1 Workforce Diversity Office of the Administrator (NA-1) As of March 24, 2012 PAY PLAN TOTAL WORKFORCE...

307

YEAR  

National Nuclear Security Administration (NNSA)

32 TOTAL WORKFORCE GENDER NNSA Production Office (NPO) As of March 23, 2013 PAY PLAN DIVERSITY 1.5% 0.7% 21.9% 21.9% 1.5% 16.8% 32.8% 2.9% Pay Plan Males 65.7% Females 34.3%...

308

YEAR  

National Nuclear Security Administration (NNSA)

0 Asian Female 0 Hispanic Male 7 Hispanic Female 18 White Male 40 White Female 28 DIVERSITY Workforce Diversity Associate Administrator for Defense Nuclear Security, NA-70 As...

309

YEAR  

National Nuclear Security Administration (NNSA)

-8.33% White Male (W,M) 34 34 0.00% White Female (W,F) 17 16 -5.88% Change DIVERSITY Change Sandia Field Office As of September 26, 2013 TOTAL WORKFORCE Change GENDER...

310

YEAR  

National Nuclear Security Administration (NNSA)

0.00% White Male (W,M) 15 13 -13.33% White Female (W,F) 8 6 -25.00% Change DIVERSITY Change Savannah River Field Office As of September 26, 2013 TOTAL WORKFORCE Change...

311

YEAR  

National Nuclear Security Administration (NNSA)

M) 6 Hispanic Female (H, F) 6 White Male (W, M) 51 White Female (W, F) 14 PAY PLAN DIVERSITY TOTAL WORKFORCE GENDER Nevada Field Office As of March 23, 2013 1.1% 3.4% 1.1% 31.8%...

312

YEAR  

National Nuclear Security Administration (NNSA)

Male 1 Asian Female 0 Hispanic Male 0 Hispanic Female 0 White Male 14 White Female 8 DIVERSITY GENDER Workforce Diversity Savannah River Site Office As of March 24, 2012 PAY PLAN...

313

YEAR  

National Nuclear Security Administration (NNSA)

Male 2 Asian Female 0 Hispanic Male 5 Hispanic Female 3 White Male 29 White Female 5 DIVERSITY Workforce Diversity Associate Administrator for Safety & Health, NA-SH As of Sep 24,...

314

YEAR  

National Nuclear Security Administration (NNSA)

Male 3 Asian Female 1 Hispanic Male 1 Hispanic Female 0 White Male 76 White Female 22 DIVERSITY Workforce Diversity Deputy Administrator for Naval Reactors (NA-30) As of March 24,...

315

YEAR  

National Nuclear Security Administration (NNSA)

Male 2 Asian Female 1 Hispanic Male 3 Hispanic Female 6 White Male 50 White Female 11 DIVERSITY GENDER Workforce Diversity Associate Administrator for Emergency Operations (NA-40)...

316

YEAR  

National Nuclear Security Administration (NNSA)

F) 6 TOTAL WORKFORCE GENDER Kansas City Field Office As of March 23, 2013 PAY PLAN DIVERSITY 2.6% 2.6% 28.9% 21.1% 39.5% 5.3% Pay Plan Males 71.1% Females 28.9% Gender AIAN, M...

317

YEAR  

National Nuclear Security Administration (NNSA)

Female 0 Hispanic Male 5 Hispanic Female 5 White Male 44 White Female 13 Workforce Diversity Pantex Site Office As of March 24, 2012 PAY PLAN TOTAL WORKFORCE DIVERSITY GENDER 57...

318

YEAR  

National Nuclear Security Administration (NNSA)

0.00% White Male (W,M) 85 71 -16.47% White Female (W,F) 33 30 -9.09% Change DIVERSITY Change NNSA Production Office (NPO) As of September 26, 2013 TOTAL WORKFORCE Change...

319

YEAR  

National Nuclear Security Administration (NNSA)

Female 0 Hispanic Male 20 Hispanic Female 11 White Male 53 White Female 17 Workforce Diversity Los Alamos Site Office As of March 24, 2012 PAY PLAN TOTAL WORKFORCE GENDER...

320

YEAR  

National Nuclear Security Administration (NNSA)

9 Asian Female 5 Hispanic Male 18 Hispanic Female 12 White Male 101 White Female 49 DIVERSITY Workforce Diversity Immediate Office of the Deputy Administrator (DP) (NA-10) As of...

Note: This page contains sample records for the topic "form eia-860m year" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

YEAR  

National Nuclear Security Administration (NNSA)

Administration As of September 26, 2013 TOTAL WORKFORCE Change GENDER PAY PLAN Change DIVERSITY Change 4.2% 0.1% 0.0% 3.5% 1.6% 6.8% 0.7% 17.6% 49.5% 2.6% 13.1% 0.0% 0.0% 0.1% 0.1%...

322

YEAR  

National Nuclear Security Administration (NNSA)

Male 2 Asian Female 4 Hispanic Male 7 Hispanic Female 5 White Male 53 White Female 19 DIVERSITY Workforce Diversity Nevada Site Office As of September 25, 2010 PAY PLAN TOTAL...

323

YEAR  

National Nuclear Security Administration (NNSA)

Female 3 Hispanic Male 7 Hispanic Female 5 White Male 52 White Female 20 Workforce Diversity Nevada Site Office As of March 24, 2012 PAY PLAN TOTAL WORKFORCE GENDER DIVERSITY 64...

324

YEAR  

National Nuclear Security Administration (NNSA)

F) 7 TOTAL WORKFORCE GENDER Savannah River Field Office As of March 23, 2013 PAY PLAN DIVERSITY 6.5% 12.9% 38.7% 38.7% 3.2% Pay Plan Males 64.5% Females 35.5% Gender AIAN, M AIAN,...

325

YEAR  

National Nuclear Security Administration (NNSA)

0 Asian Female 0 Hispanic Male 7 Hispanic Female 18 White Male 40 White Female 25 DIVERSITY GENDER Workforce Diversity As of March 24, 2012 PAY PLAN TOTAL WORKFORCE Associate...

326

YEAR  

National Nuclear Security Administration (NNSA)

White Male (W,M) 389 400 2.83% White Female (W,F) 21 19 -9.52% Change DIVERSITY Change Assistant Deputy Administrator for Secure Transportation (NA-15) As of...

327

YEAR  

National Nuclear Security Administration (NNSA)

2 Asian Female 0 Hispanic Male 13 Hispanic Female 17 White Male 37 White Female 17 DIVERSITY GENDER Workforce Diversity Sandia Site Office As of March 24, 2012 PAY PLAN TOTAL...

328

YEAR  

National Nuclear Security Administration (NNSA)

Reactors (120) and Assistant Deputy Administrator for Secure Transportation (586) DIVERSITY Workforce Diversity National Nuclear Security Administration As of Apr 10, 2011 PAY...

329

YEAR  

National Nuclear Security Administration (NNSA)

<30 30-39 40-49 50-59 60-69 70+ 6.1% 21.6% 26.7% 34.5% 10.6% 0.6% Age Groups as a Percentage of Workforce 0% 5% 10% 15% 20% 25% 30% 35% 3.5% 30.8% 34.2% 31.5% Education J.D....

330

YEAR  

National Nuclear Security Administration (NNSA)

50% <30 30-39 40-49 50-59 60-69 70+ 7.5% 22.5% 30.0% 32.5% 7.5% 0.0% Age Groups as a Percentage of Workforce 0.0% 32.5% 27.5% 40.0% Education J.D.Ph.DSc.D Degrees Masters Degrees...

331

YEAR  

National Nuclear Security Administration (NNSA)

<30 30-39 40-49 50-59 60-69 70+ 35.3% 29.4% 17.6% 5.9% 11.8% 0.0% Age Groups as a Percentage of Workforce 0.0% 23.5% 58.8% 17.6% Education J.D.Ph.DSc.D Degrees Masters Degrees...

332

YEAR  

National Nuclear Security Administration (NNSA)

<30 30-39 40-49 50-59 60-69 70+ 24.8% 15.0% 21.7% 31.8% 5.6% 1.0% Age Groups as a Percentage of Workforce 0.3% 31.5% 37.4% 30.8% Education J.D.Ph.DSc.D Degrees Masters Degrees...

333

YEAR  

National Nuclear Security Administration (NNSA)

50% <30 30-39 40-49 50-59 60-69 70+ 2.3% 2.3% 20.5% 50.0% 22.7% 2.3% Age Groups as a Percentage of Workforce 6.8% 38.6% 45.5% 9.1% Education J.D.Ph.DSc.D Degrees Masters Degrees...

334

YEAR  

National Nuclear Security Administration (NNSA)

50% <30 30-39 40-49 50-59 60-69 70+ 6.6% 41.7% 32.7% 16.0% 3.0% 0.0% Age Groups as a Percentage of Workforce 0.4% 7.6% 16.0% 76.0% Education J.D.Ph.DSc.D Degrees Masters Degrees...

335

YEAR  

National Nuclear Security Administration (NNSA)

<30 30-39 40-49 50-59 60-69 70+ 11.6% 27.9% 18.6% 18.6% 23.3% 0.0% Age Groups as a Percentage of Workforce 41.9% 16.3% 25.6% 16.3% Education J.D.Ph.DSc.D Degrees Masters...

336

Change Request Forms | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Change Request Forms | National Nuclear Security Administration Change Request Forms | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Change Request Forms Home > About Us > Our Programs > Nuclear Security > Nuclear Materials Management & Safeguards System > NMMSS Information, Reports & Forms > Change Request Forms Change Request Forms

337

Musical form in non-narrative video  

E-Print Network (OSTI)

"Musical Form in Non- Narrative Video" explores musical structure as a model for visual form over time, specifically in the creation of artistic video. Video is a medium in which sound and image coexist at the source as ...

Sebring, Ellen Irene

1986-01-01T23:59:59.000Z

338

FINAL STAFF REPORT FORMS AND INSTRUCTIONS FOR  

E-Print Network (OSTI)

is acceptable, but a narrative should explain the units reported (for example, number of customers or number .................................................9 Form 1.3 Peak Demand by Sector (Bundled Customers..................................................................................................12 Form 2.3 Customer Counts and Other Inputs

339

Form:Buildings Model | Open Energy Information  

Open Energy Info (EERE)

Buildings Model Jump to: navigation, search This is the 'Buildings Model' form. To add a page with this form, enter the page name below; if a page with that name already exists,...

340

Form:Buildings Publication | Open Energy Information  

Open Energy Info (EERE)

Buildings Publication Jump to: navigation, search This is the 'Buildings Publication' form. To add a page with this form, enter the page name below; if a page with that name...

Note: This page contains sample records for the topic "form eia-860m year" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

FORMS AND INSTRUCTIONS FOR SUBMITTING ELECTRIC  

E-Print Network (OSTI)

CALIFORNIA ENERGY COMMISSION FORMS AND INSTRUCTIONS FOR SUBMITTING ELECTRIC TRANSMISSION Instructions for Electric Transmission Forms ............................................................. 6 Electric transmission, transmission corridor, data request. #12;1 Background The California Energy

342

Metered Mail Form International Mail Only  

E-Print Network (OSTI)

Metered Mail Form International Mail Only Charge to Department USPS First Class Mail International International Metered Mail Form and must be kept separate from all other domestic mail. · International mail

Palmeri, Thomas

343

Form W-9 (Rev. January 2011)  

NLE Websites -- All DOE Office Websites (Extended Search)

to establish your U.S. status and avoid withholding on your share of partnership income. Cat. No. 10231X Form W-9 (Rev. 1-2011) Form W-9 (Rev. 1-2011) Page 2 The person who gives...

344

Appendix C - Forms for Reporting State Data  

NLE Websites -- All DOE Office Websites (Extended Search)

C - Forms for Reporting State Data Copies of the two forms used by States to report motor fuel use are attached. FHWA-551M reports a monthly consumption of motor fuel. (2 page...

345

Form:RRSection | Open Energy Information  

Open Energy Info (EERE)

Form Edit History Facebook icon Twitter icon Form:RRSection Jump to: navigation, search Enter the title of the Geothermal Regulatory Roadmap section you would like to create. If...

346

Form:Utility Company | Open Energy Information  

Open Energy Info (EERE)

Form Edit History Facebook icon Twitter icon Form:Utility Company Jump to: navigation, search Input your utility company name below to add to the registry. If the company is...

347

Microsoft Word - Epoxy Usage Form.docx  

NLE Websites -- All DOE Office Websites (Extended Search)

Division Form Rev. 41111 Monthly Epoxy Usage Form (Weight in Grams) Date Initials CTD 101K Stycast Catalyst Epon Resin Epicure Part A Part B Part C 2850 24LV 815828 3140...

348

An Alternative Form for Potential Vorticity  

Science Conference Proceedings (OSTI)

A form of potential vorticity is described that has conservation properties similar to those of Ertel's potential vorticity (EPV) but removes the exponential variation with height displayed by EPV. This form is thus more suitable for inspecting ...

Leslie R. Lait

1994-06-01T23:59:59.000Z

349

On a New Form of Quantum Mechanics  

E-Print Network (OSTI)

We propose a new form of nonrelativistic quantum mechanics which is based on a quantum version of the action principle.

N. N. Gorobey; A. S. Lukyanenko

2008-07-22T23:59:59.000Z

350

Electronic Comment Form | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Electronic Comment Form | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response...

351

Employee Concerns Reporting Form | National Nuclear Security...  

National Nuclear Security Administration (NNSA)

Reporting Form | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing...

352

Year STB EIA STB EIA  

U.S. Energy Information Administration (EIA) Indexed Site

Form EIA-923 Power Plant Operations Report Real values derived using the GDP Chain-type Price Index, 2005 100. Table 4. Estimated average rail transportation rates for coal...

353

Effect of Concrete Waste Form Properties on Radionuclide Migration  

Science Conference Proceedings (OSTI)

Assessing long-term performance of Category 3 waste cement grouts for radionuclide encasement requires knowledge of the radionuclide-cement interactions and mechanisms of retention (i.e., sorption or precipitation) the mechanism of contaminant release, the significance of contaminant release pathways, how waste form performance is affected by the full range of environmental conditions within the disposal facility, the process of waste form aging under conditions that are representative of processes occurring in response to changing environmental conditions within the disposal facility, the effect of waste form aging on chemical, physical, and radiological properties and the associated impact on contaminant release. This knowledge will enable accurate prediction of radionuclide fate when the waste forms come in contact with groundwater. Numerous sets of tests were initiated in fiscal years (FY) 2006-2009 to evaluate (1) diffusion of iodine (I) and technetium (Tc) from concrete into uncontaminated soil after 1 and 2 years, (2) I and rhenium (Re) diffusion from contaminated soil into fractured concrete, (3) I and Re (set 1) and Tc (set 2) diffusion from fractured concrete into uncontaminated soil, (4) evaluate the moisture distribution profile within the sediment half-cell, (5) the reactivity and speciation of uranium (VI) (U(VI)) compounds in concrete porewaters, (6) the rate of dissolution of concrete monoliths, and (7) the diffusion of simulated tank waste into concrete.

Mattigod, Shas V.; Bovaird, Chase C.; Wellman, Dawn M.; Skinner, De'Chauna J.; Cordova, Elsa A.; Wood, Marcus I.

2009-09-30T23:59:59.000Z

354

CALENDAR YEAR 2011 ANNUAL SECURITY  

E-Print Network (OSTI)

CALENDAR YEAR 2011 ANNUAL SECURITY FIRE SAFETY REPORT& #12;University of North Dakota Annual Security & Fire Safety Report: Calendar Year 2011 n Page 1 Dear Community Member: I am pleased to introduce the 2011 Annual Security and Fire Safety Report for the University of North Dakota. This report

Delene, David J.

355

Outlook: The Next Twenty Years  

SciTech Connect

I present an outlook for the next twenty years in particle physics. I start with the big questions in our field, broken down into four categories: horizontal, vertical, heaven, and hell. Then I discuss how we attack the bigquestions in each category during the next twenty years. I argue for a synergy between many different approaches taken in our field.

Murayama, Hitoshi

2003-12-07T23:59:59.000Z

356

Outlook: The Next Twenty Years  

E-Print Network (OSTI)

I present an outlook for the next twenty years in particle physics. I start with the big questions in our field, broken down into four categories: horizontal, vertical, heaven, and hell. Then I discuss how we attack the big questions in each category during the next twenty years. I argue for a synergy between many different approaches taken in our field.

Hitoshi Murayama

2003-12-07T23:59:59.000Z

357

ORPS Facility Registration Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Facility Registration Form Facility Registration Form ORPS Facility Registration Form August 9, 2007 Add, Change or Delete a Facility for Occurrence Reporting and Processing System Submit completed form to: U.S. Department of Energy HSS InfoCenter, HS-1.22, 270CC 1000 Independence Ave., SW Washington, DC 20585-0270 FAX: 301-903-9823 PHONE: 800-473-4375 Note: Only one facility per form Type or print all entries TYPE OF CHANGE: Add a Facility (Complete Section 1.A, then go to Section 2) Change a Facility (Complete Section 1.B, then go to Section) Delete a Facility (Complete Section 1.C, then go to Section 2) ORPS Facility Registration Form More Documents & Publications ORPS User Registration Form DOE-TSPP-9, Maintenance of DOE Technical Standards - August 1, 2000 EA-1442: Final Environmental Assessment

358

U.S. Department of Energy Natural Gas Imports and Exports Form...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

OMB No. 1901-0294 U.S. Department of Energy Natural Gas Imports and Exports Form FE-746R Expiration Date: 7312016 AVG Burden: 3.0 hours MonthYear: Importer...

359

Disposal criticality analysis methodology for fissile waste forms  

SciTech Connect

A general methodology has been developed to evaluate the criticality potential of the wide range of waste forms planned for geologic disposal. The range of waste forms include commercial spent fuel, high level waste, DOE spent fuel (including highly enriched), MOX using weapons grade plutonium, and immobilized plutonium. The disposal of these waste forms will be in a container with sufficiently thick corrosion resistant barriers to prevent water penetration for up to 10,000 years. The criticality control for DOE spent fuel is primarily provided by neutron absorber material incorporated into the basket holding the individual assemblies. For the immobilized plutonium, the neutron absorber material is incorporated into the waste form itself. The disposal criticality analysis methodology includes the analysis of geochemical and physical processes that can breach the waste package and affect the waste forms within. The basic purpose of the methodology is to guide the criticality control features of the waste package design, and to demonstrate that the final design meets the criticality control licensing requirements. The methodology can also be extended to the analysis of criticality consequences (primarily increased radionuclide inventory), which will support the total performance assessment for the respository.

Davis, J.W. [Framatome Cogema Fuels, Las Vegas, NV (United States); Gottlieb, P. [TRW Environmental Safety Systems, Las Vegas, NV (United States)

1998-03-01T23:59:59.000Z

360

Neutron charge radius and the neutron electric form factor  

Science Conference Proceedings (OSTI)

For nearly forty years, the Galster parametrization has been employed to fit existing data for the neutron electric form factor, G{sub E}{sup n}, vs the square of the four-momentum transfer, Q{sup 2}. Typically this parametrization is constrained to be consistent with experimental data for the neutron charge radius. However, we find that the Galster form does not have sufficient freedom to accommodate reasonable values of the radius without constraining or compromising the fit. In addition, the G{sub E}{sup n} data are now at sufficient precision to motivate a two-parameter fit (or three parameters if we include thermal neutron data). Here we present a modified form of a two-dipole parametrization that allows this freedom and fits both G{sub E}{sup n} (including recent data at both low and high four-momentum transfer) and the charge radius well with simple, well-defined parameters. Analysis reveals that the Galster form is essentially a two-parameter approximation to the two-dipole form but becomes degenerate if we try to extend it naturally to three parameters.

Gentile, T. R. [Stop 8461, National Institute of Standards and Technology, Gaithersburg, Maryland 20899 (United States); Crawford, C. B. [University of Kentucky, Lexington, Kentucky 40506 (United States)

2011-05-15T23:59:59.000Z

Note: This page contains sample records for the topic "form eia-860m year" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

70 Images for 70 Years  

NLE Websites -- All DOE Office Websites (Extended Search)

70 Images for 70 Years 70 Images for 70 Years 70 Images for 70 Years Los Alamos has a proud history and heritage of almost 70 years of science and innovation. The people of the Laboratory work on advanced technologies to provide the best scientific and engineering solutions to many of the nation's most crucial security challenges. Click thumbnails to enlarge. Photos arranged by most recent first, horizontal formats before vertical. See Flickr for more sizes and details. 1938 Hahn and Meitner Fission 1938 Hahn and Meitner Fission 1939 Einstein-Szilard 1939 Einstein-Szilard 1940s Main Guard Gate (671938) 1940s Main Guard Gate (671938) 1940s Security check 1940s Security check 1940 Boys Ranch School hockey on Ashley Pond 1940 Boys Ranch School hockey on Ashley Pond 1942 Fuller Lodge 1942 Fuller Lodge

362

Microsoft Word - The Oppenheimer Years  

NLE Websites -- All DOE Office Websites (Extended Search)

Years 1943-1945 At 5:29:45 am MWT on July 16, 1945, the world's first atomic bomb exploded 100 feet over a portion of the southern New Mexico desert known as the Jornada...

363

Accountability report - fiscal year 1997  

SciTech Connect

This document contains the US NRC`s accountability report for fiscal year 1997. Topics include uses of funds, financial condition, program performance, management accountability, and the audited financial statement.

1998-04-01T23:59:59.000Z

364

FEMP Year in Review 2003  

NLE Websites -- All DOE Office Websites (Extended Search)

identifying and implementing energy saving projects, the 2003 award winners have created energy cost savings of more than 62 million and 3.4 trillion Btu in one year. Our winners...

365

Transmission electron microscopy analysis of corroded metal waste forms.  

SciTech Connect

This report documents the results of analyses with transmission electron microscopy (TEM) combined with energy dispersive X-ray spectroscopy (EDS) and selected area electron diffraction (ED) of samples of metallic waste form (MWF) materials that had been subjected to various corrosion tests. The objective of the TEM analyses was to characterize the composition and microstructure of surface alteration products which, when combined with other test results, can be used to determine the matrix corrosion mechanism. The examination of test samples generated over several years has resulted in refinements to the TEM sample preparation methods developed to preserve the orientation of surface alteration layers and the underlying base metal. The preservation of microstructural spatial relationships provides valuable insight for determining the matrix corrosion mechanism and for developing models to calculate radionuclide release in repository performance models. The TEM results presented in this report show that oxide layers are formed over the exposed steel and intermetallic phases of the MWF during corrosion in aqueous solutions and humid air at elevated temperatures. An amorphous non-stoichiometric ZrO{sub 2} layer forms at the exposed surfaces of the intermetallic phases, and several nonstoichiometric Fe-O layers form over the steel phases in the MWF. These oxide layers adhere strongly to the underlying metal, and may be overlain by one or more crystalline Fe-O phases that probably precipitated from solution. The layer compositions are consistent with a corrosion mechanism of oxidative dissolution of the steel and intermetallic phases. The layers formed on the steel and intermetallic phases form a continuous layer over the exposed waste form, although vertical splits in the layer and corrosion in pits and crevices were seen in some samples. Additional tests and analyses are needed to verify that these layers passivate the underlying metals and if passivation can break down as the MWF corrodes. The importance of localized corrosion should also be determined.

Dietz, N. L.

2005-04-15T23:59:59.000Z

366

World Year of Physics 2005  

NLE Websites -- All DOE Office Websites (Extended Search)

IMAGE: World Year of Physics 2005 nameplate Berkeley Lab logo Berkeley Lab Celebrates World Year of Physics 2005 Berkeley Lab Web Search Berkeley Lab Phone Book Berkeley Lab A-Z Index Berkeley Lab Privacy and Security Notice IMAGE: World Year of Physics 2005 nameplate Berkeley Lab logo Berkeley Lab Celebrates World Year of Physics 2005 Berkeley Lab Web Search Berkeley Lab Phone Book Berkeley Lab A-Z Index Berkeley Lab Privacy and Security Notice IMAGE: World of Physics graphic Symposia page link Special Events page link Lectures page link Education page link The World Year of Physics is a worldwide celebration of physics and its importance in our everyday lives. Physics not only plays an important role in the development of science and technology but also has a tremendous impact on our society. WYP aims to raise the worldwide awareness of physics and physical science. The United Nations has declared 2005 to be the International Year of Physics. This declaration coincides with the 100th anniversary of physicist

367

ProForm | Open Energy Information  

Open Energy Info (EERE)

ProForm ProForm Jump to: navigation, search Tool Summary Name: ProForm Agency/Company /Organization: Lawrence Berkeley National Laboratory Sector: Climate, Energy Focus Area: - Landfill Gas, Energy Efficiency, Solar, Wind Topics: Co-benefits assessment, - Environmental and Biodiversity, Finance Resource Type: Software/modeling tools User Interface: Spreadsheet Complexity/Ease of Use: Moderate Website: poet.lbl.gov/Proform/ Cost: Paid References: ProForm[1] Related Tools ICCT Roadmap Model General Equilibrium Modeling Package (GEMPACK) Modeling International Relationships in Applied General Equilibrium (MIRAGE) ... further results Find Another Tool FIND DEVELOPMENT IMPACTS ASSESSMENT TOOLS Logo: ProForm ProForm is a software tool designed to support a basic assessment of the

368

Paperclips Supply Store Forms | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Paperclips Supply Store Forms Paperclips Supply Store Forms Paperclips Supply Store Forms Catalog Order Form for Non-Stocked or Specialty Items For any non-stocked or special item that needs to be ordered, the Catalog Order Form (pdf) needs to be filled in. All supplies ordered MUST be used for Official Government Business. All catalog orders are subject to full payment or a restocking fee if items ordered are returned to the supplier due to the customer not picking up the item(s) within five days of receipt by the store personnel or the customer deciding to return the item(s). This form is fillable and also saveable with the Acrobat Reader or through your web browser. Request Supply Store Purchasing Authority for a Non-Federal Employee In order for non-federal headquarters personnel to gain access to make

369

Alternative Electrochemical Salt Waste Forms, Summary of FY/CY2011 Results  

Science Conference Proceedings (OSTI)

This report summarizes the 2011 fiscal+calendar year efforts for developing waste forms for a spent salt generated in reprocessing nuclear fuel with an electrochemical separations process. The two waste forms are tellurite (TeO2-based) glasses and sol-gel-derived high-halide mineral analogs to stable minerals found in nature.

Riley, Brian J.; McCloy, John S.; Crum, Jarrod V.; Rodriguez, Carmen P.; Windisch, Charles F.; Lepry, William C.; Matyas, Josef; Westman, Matthew P.; Rieck, Bennett T.; Lang, Jesse B.; Pierce, David A.

2011-12-01T23:59:59.000Z

370

Quick Plastic Forming of Aluminum Sheet Metal  

NLE Websites -- All DOE Office Websites (Extended Search)

General Motors' President North America, Gary Cowger, General Motors' President North America, Gary Cowger, reviews the 2004 Chevy Malibu Maxx after introducing it to the media at the New York Auto Show. (photo courtesy of General Motors) Quick Plastic Forming of Aluminum Sheet Metal Background Aluminum automotive components made using a hot blow forming process are reducing vehicle weight and increasing the fuel efficiency of today's cars. However, before General Motors (GM) and the U.S. Department of Energy (DOE) sponsored research in this technol- ogy, blow forming of aluminum was not a viable process for automakers. The prior blow forming process,

371

Security Forms | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Management & Safeguards System Security Forms Federal Information Processing Standards Publications (FIPS PUBS) FIPS-Associated Documents FIPS 140-2 Security Requirements...

372

Fermilab | Take Five for Goal Zero | Forms  

NLE Websites -- All DOE Office Websites (Extended Search)

Forms Work Planning Work Permit & Notification Hazard Analysis Electrical Hazard Analysis Pressure Testing Permit General LOTO Procedure Excavation Permit NEPA Project Information...

373

Configuration Change Proposal Form | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

and Office Management Areas. Green-DNS-Form09.doc More Documents & Publications Cyber Security Procurement Language for Control Systems Version 1.8 OPC Security Whitepaper...

374

Spray Forming: Alloys, Products, and Markets  

Science Conference Proceedings (OSTI)

Due to the single-step processing cycle, spray-formed aluminum alloys can be produced at substantially lower costs than P/M products, approaching cost levels ...

375

SPRAY FORMING--EXPERIMENT, ANALYSIS, AND ...  

Science Conference Proceedings (OSTI)

In addition, details of the requirements for large-scale production of spray-formed alloys and process developments to reduce costs and improve product...

376

Assessment of Preferred Depleted Uranium Disposal Forms  

NLE Websites -- All DOE Office Websites (Extended Search)

. . 7 3.2 PRELIMINARY ASSESSMENT OF DU DISPOSAL AT OTHER SITES . . . . . . . . . . 8 3.3 COSTS OF PRODUCTION, TRANSPORTATION, AND DISPOSAL OF DU WASTE FORMS . . . . . . . . . . ....

377

Request for Training Exemption/Waiver Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Modified for use by Photon Sciences Effective 06282013 Photon Sciences Request for Training Reciprocity Form For General Employee Radiological Training (GERT) Individuals may be...

378

Questions and Answers - How do atoms form?  

NLE Websites -- All DOE Office Websites (Extended Search)

(Biggest and smallest atom?) Questions and Answers Main Index Next Question (Does gravity affect atoms?) Does gravity affect atoms? How do atoms form? The current view is that...

379

Sample Forms | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Sample Forms Home > About Us > Our Programs > Nuclear Security > Nuclear Materials Management &...

380

Security Forms | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Security Forms Home > About Us > Our Programs > Nuclear Security > Nuclear Materials...

Note: This page contains sample records for the topic "form eia-860m year" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

SPRAY FORMING--EXPERIMENT, ANALYSIS, AND ... - TMS  

Science Conference Proceedings (OSTI)

... Jt. EPD/MDMD Synthesis Control & Analysis in Materials Processing .... IN THE SPRAY-FORMED ALUMINUM ALLOY PREFORMS: Ram B. Bhagat, Maurice...

382

Ocean Feedback Form | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Feedback Form Ocean Data Tools Technical Guide Map Gallery Regional Planning Feedback Ocean You are here Data.gov Communities Ocean Comments or Suggestions Name * Email Topic...

383

2000 TMS Annual Meeting Housing Form  

Science Conference Proceedings (OSTI)

Feb 18, 2000 ... PLEASE COMPLETE THE FORM BELOW AND RETURN TO: Opryland Hotel & Convention Center. Attn: Reservations Manager (c-mmm).

384

For Researchers: Forms and Policies - Lawrence Berkeley ...  

Policy: Conflict of Interest in Licensing. Form: Conflict of Interest TT 100-LBNL (.doc) ... U.S. DEPARTMENT OF ENERGY OFFICE OF SCIENCE UNIVERSITY OF CALIFORNIA.

385

SPARQL Query Form | OpenEI  

Open Energy Info (EERE)

624878 Varnish cache server SPARQL Query Form Default Graph URI Query text select distinct ?Concept where a ?Concept LIMIT 100 Display Results As: Auto HTML Spreadsheet XML...

386

Fermilab at Work - Manuals and Forms  

NLE Websites -- All DOE Office Websites (Extended Search)

Fermilab at Work Home Home FAW Home Fermilab Now Directories and Maps Work Resources Policies and Forms Administration Lab Life Physics Links Experiments and Projects Divisions and...

387

CRA Memorandum form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

form This memorandum summarizes salient inputs to the CRA locational price forecasting model (GE MAPS). The model geographic footprint encompasses the US portion of the...

388

Magnesium: Digital Resource Center - ARTICLE: Forming of ...  

Science Conference Proceedings (OSTI)

Sep 20, 2007 ... This paper addresses the formability of magnesium extrusions with respect to rotary-draw bending and hydro-mechanical forming, presenting...

389

Sample Forms | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Sample Forms | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our...

390

Form W-8BEN (Rev. February 2006)  

NLE Websites -- All DOE Office Websites (Extended Search)

Form W-8BEN (Rev. February 2006) Department of the Treasury Internal Revenue Service Certificate of Foreign Status of Beneficial Owner for United States Tax Withholding See...

391

Julian Szekely Memorial Symposium Registration Form  

Science Conference Proceedings (OSTI)

... housing reservations by downloading and mailing or faxing the Housing Reservation Form, which is an Adobe Acrobat portable document format (.pdf) file .

392

Alumina-forming Austenitic Alloys Licensed | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

for alumina scales to form on the exterior of the steel, which provides significant oxidation resistance. In addition, the alloy displays excellent creep strength at high...

393

Frequently Asked Questions Form EIA-857  

U.S. Energy Information Administration (EIA) Indexed Site

Natural Gas Survey Forms FAQ Natural Gas Survey Forms FAQ EIA-857, "Monthly Report of Natural Gas Purchases and Deliveries to Consumers" You may always call Amy Sweeney for assistance at (202) 586-2627 or e-mail us at OOG.SURVEYS@eia.gov. Q1. How do I get a copy of the form and/or the instructions? Q2. What version of the form should I use? Q3. How do I submit the form? Q4. When is the form due? Q5. My company does not have the information required on the Form EIA-857 within 30 days after the end of the report month. Can we get an extension? Q6. Who should I inform of a change in the contact person in our company for Form EIA-857? Q7. Who should I inform if our company is sold, merged with another company, or buys another natural gas company? Q8. Why does my company always get selected to file Form EIA-857?

394

Nucleon Form Factor Measurements and Interpretation  

SciTech Connect

The data base for the form factors of the nucleon obtained from elastic ep scattering is discussed, as well as some recent developments in their calculation.

Charles F. Perdrisat

2007-08-22T23:59:59.000Z

395

Employee Assistance Self-ID Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Request for Assistance During an Emergency Employee Self Identification This form is to be used by persons who expect that they will need assistance during an emergency. The...

396

Pantex Facility 10-Year Natural Phenomena Flood Hazard Analysis  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Pantex Facility 10-Year Natural Pantex Facility 10-Year Natural Phenomena Flood Hazard Analysis Presented by and October, 2011 Presentation Outline I. Introductions II. Pantex III. 10 Year Update IV. Final Results V. July 2010 Event VI. Emergency Planning VII.What's Next Pantex The Pantex Plant, located 17 miles northeast of Amarillo, Texas, in Carson County, is charged with maintaining the safety, security and reliability of the nation's nuclear weapons stockpile. Worked performed at Pantex supports three core missions. * Stockpile Stewardship * Nonproliferation and * Safeguards and Security Pantex (cont.) - Location Pantex (cont.) - Weather Patterns * Precipitation is typical for Southwest climate, mainly in the form of Spring and

397

DOE Emergency Exercise Feedback Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE Emergency Exercise Feedback Form DOE Emergency Exercise Feedback Form Emergency Exercise Feedback Form DOE Emergency Exercise Feedback Form More Documents & Publications...

398

Consolidated financial statements for fiscal year 1996  

Science Conference Proceedings (OSTI)

The following overview and accompanying audited financial statements have been prepared for Fiscal Year (FY) 1996 to report the financial position and the results of operations of the Department of Energy. These statements include the consolidated Statement of Financial Position and the consolidated Statement of Operations and Changes in Net Position. The statements have been prepared in accordance with the Office of Management and Budget Bulletin No. 94-01, Form and Content for Agency Financial Statements, and were developed in accordance with the hierarchy of accounting standards described therein. The overview provides a narrative on the Department of Energy`s mission, activities, and accomplishments. Utilizing performance measures as the primary vehicle for communicating Departmental accomplishments and results, this overview discusses the most significant measures while others are discussed in the supplemental information to the financial statements.

NONE

1997-02-01T23:59:59.000Z

399

Jet acollinearity and quark form factors  

Science Conference Proceedings (OSTI)

Perturbative Quantum Chromodynamic corrections involving the emission of gluons which are both soft and collinear are discussed for both hadronic production of lepton pairs and e/sup +/e/sup -/ annihilation. The result is an exponential, double logarithmic quark form factor. The effect of sub-leading corrections and the possible experimental observation of the form factor are discussed.

Stirling, W.J.

1980-01-01T23:59:59.000Z

400

Metered Mail Form Domestic Mail Only  

E-Print Network (OSTI)

Metered Mail Form Domestic Mail Only For USPS Mail Only Charge to Department First Class Mail Media Meter Form. · All outgoing USPS Mail that needs postage should be kept separate from all other mail already be sealed prior to being metered. Failure to properly seal this type of mail could result

Palmeri, Thomas

Note: This page contains sample records for the topic "form eia-860m year" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

This form is used to activate claim  

E-Print Network (OSTI)

. IMPORTANT: Claim reimbursements can only be paid from the TIAA-CREF Money Market Mutual Fund. You may need. 4. Fax your completed form to 800 914-8922, or mail the form to: TIAA-CREF P.O. Box 1259 Charlotte

402

Form W-8BEN (Rev. February 2006)  

NLE Websites -- All DOE Office Websites (Extended Search)

Form Form W-8BEN (Rev. February 2006) Department of the Treasury Internal Revenue Service Certificate of Foreign Status of Beneficial Owner for United States Tax Withholding ᮣ See separate instructions. ᮣ Give this form to the withholding agent or payer. Do not send to the IRS. OMB No. 1545-1621 Do not use this form for: Instead, use Form: ● A foreign partnership, a foreign simple trust, or a foreign grantor trust (see instructions for exceptions) W-8ECI or W-8IMY ● A foreign government, international organization, foreign central bank of issue, foreign tax-exempt organization, foreign private foundation, or government of a U.S. possession that received effectively connected income or that is claiming the applicability of section(s) 115(2), 501(c), 892, 895, or 1443(b) (see instructions)

403

On Line Beamline Commissioning Activity Approval Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Commissioning Activity Approval Form Commissioning Activity Approval Form This form is to be filled by the Commissioning Activity Team Leader. No beamline commissioning activities will be allowed to run without a properly completed, approved, and posting of this commissioning approval form. You will be notified by e-mail upon approval. Sector Beamline Expected Start Date Expected Duration 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 BM ID ( Give a Unit) Activity Description( Give only a brief description) Commissioning Team Members First and Last Name Affiliation Phone Number 1. 2. 3. 4. 5. 6. Special Safety Concerns Commissioning Activity Team Leader Name E-Mail Address Submit Commissioning Activity Approval Form Clear all Fields and start All over again!!!

404

Miscellaneous Forms | Y-12 National Security Complex  

NLE Websites -- All DOE Office Websites (Extended Search)

Miscellaneous Forms Miscellaneous Forms Miscellaneous Forms The following miscellaneous forms are provided in PDF fillable and/or Word format. Click the link in the "Format" column to open a copy of the form or right-click to download. Number* Title/Description Format** SF-85 Questionnaire for Non-Sensitive Positions PDF-fil UCN-13A Relocation Expense Report PDF-fil, PDF print UCN-15436 Gifts and Grants Request PDF-fil, Word UCN-16708 Request for Authorization to Ship SNM or Non-SNM Material (U) Word UCN-16790A Approval of Product Returned for Accountable Material and Non-Accountable Weapons Material (U) PDF print UCN-20650 Statement of Interest in Maintaining Section 3161 Employment Eligibility PDF-fil UCN-20904 Supplier Qualification Questionnaire Word

405

Qualifying radioactive waste forms for geologic disposal  

SciTech Connect

We have developed a phased strategy that defines specific program-management activities and critical documentation for producing radioactive waste forms, from pyrochemical processing of spent nuclear fuel, that will be acceptable for geologic disposal by the US Department of Energy. The documentation of these waste forms begins with the decision to develop the pyroprocessing technology for spent fuel conditioning and ends with production of the last waste form for disposal. The need for this strategy is underscored by the fact that existing written guidance for establishing the acceptability for disposal of radioactive waste is largely limited to borosilicate glass forms generated from the treatment of aqueous reprocessing wastes. The existing guidance documents do not provide specific requirements and criteria for nonstandard waste forms such as those generated from pyrochemical processing operations.

Jardine, L.J. [Lawrence Livermore National Lab., CA (United States); Laidler, J.J.; McPheeters, C.C. [Argonne National Lab., IL (United States)

1994-09-01T23:59:59.000Z

406

Photovoltaics Overview: Fiscal Year 2001  

DOE Green Energy (OSTI)

In Fiscal Year 2001, for the third year in a row, the solar electric market grew at more than 30%. Fueling this growth is the U.S. photovoltaic industry - the companies that design, manufacture, install, operate, and maintain all components of solar generating systems. The messages of the U.S. PV industry roadmap are taken very seriously by the U.S. Department of Energy's Office of Solar Energy Technologies. Achieving industry's goals will demand aggressive work in fundamental and exploratory research, manufacturing, and system applications to reduce the cost of solar electric systems. This is an annual report of the DOE PV Program, FY2001.

Not Available

2002-02-01T23:59:59.000Z

407

Forming a Primordial Star in a Relic HII Region  

DOE Green Energy (OSTI)

There has been considerable theoretical debate over whether photoionization and supernova feedback from the first Population III stars facilitate or suppress the formation of the next generation of stars. We present results from an Eulerian adaptive mesh refinement simulation demonstrating the formation of a primordial star within a region ionized by an earlier nearby star. Despite the higher temperatures of the ionized gas and its flow out of the dark matter potential wells, this second star formed within 23 million years of its neighbor's death. The enhanced electron fraction within the HII region catalyzes rapid molecular hydrogen formation that leads to faster cooling in the subsequent star forming halos than in the first halos. This ''second generation'' primordial protostar has a much lower accretion rate because, unlike the first protostar, it forms in a rotationally supported disk of {approx} 10-100 M{center_dot}. In contrast to unpreprocessed regions, such configurations may allow binaries or multiple systems of lower mass stars to form. These first high resolution calculations offer insight into the impact of feedback upon subsequent populations of stars and clearly demonstrate how primordial chemistry promotes the formation of subsequent generations of stars even in the presence of the entropy injected by the first stars into the IGM.

O'Shea, Brian

2005-04-12T23:59:59.000Z

408

Nuclear Materials Focus Area Fiscal Year 2002 Mid Year Review  

SciTech Connect

The Nuclear Materials Focus Area (NMFA) held its annual mid-year review on February 12 and 14, 2002, in Santa Fe, New Mexico. The purpose of this review was to examine both the technical aspects and the programmatic aspects of its technology development program. The focus area activities were reviewed by a panel consisting of personnel representing the end users of the technologies, and technical experts in nuclear materials. This year's review was somewhat different than in the past, as the stress was on how well the various projects being managed through the NMFA aligned with the two thrust areas and nine key goals and priorities recently issued by the Deputy Assistant Secretary for DOE's Office of Environmental Management (EM).

Thiel, E.C.; Fuhrman, P.W.

2002-05-30T23:59:59.000Z

409

Nuclear Materials Focus Area Fiscal Year 2002 Mid Year Review  

Science Conference Proceedings (OSTI)

The Nuclear Materials Focus Area (NMFA) held its annual mid-year review on February 12 and 14, 2002, in Santa Fe, New Mexico. The purpose of this review was to examine both the technical aspects and the programmatic aspects of its technology development program. The focus area activities were reviewed by a panel consisting of personnel representing the end users of the technologies, and technical experts in nuclear materials. This year's review was somewhat different than in the past, as the stress was on how well the various projects being managed through the NMFA aligned with the two thrust areas and nine key goals and priorities recently issued by the Deputy Assistant Secretary for DOE's Office of Environmental Management (EM).

Thiel, Elizabeth Chilcote

2002-05-01T23:59:59.000Z

410

FIVE-YEAR FINANCIAL OUTLOOK  

E-Print Network (OSTI)

Outlook) for the City of San Diego which presented a comprehensive examination of the Citys long range fiscal condition. The Financial Outlook has proven to be an important planning tool for the City of San Diego. The Outlook guided the City in establishing the fiscal year 2008 annual budget and has served throughout the year as the basis for longer term fiscal decisionmaking. The Outlook has communicated the Citys fiscal priorities along with the Citys strengths and the challenges that remain in achieving a balanced General Fund budget and fiscal health. The updated Five-Year Financial Outlook (2009-2013 Outlook) includes revised revenue and expenditure projections for fiscal years 2009 through 2013 as well as additional fiscal commitments that have emerged since the 2008-2012 Outlook was issued. Similar to the 2008-2012 Outlook, the revised revenue and expenditure estimates in the 2009-2013 Outlook are based on a variety of assumptions in the context of current and projected economic conditions. The updated Outlook not only identifies revenue and expenditure trends but also discusses risks and opportunities that affect fiscal decisions and the Citys ability to accomplish its strategic goals over the next five-year period. Those goals include: Preservation of City services to the fullest extent possible. Fund the operations of new public facilities. Meet contractual obligations and fund mandated programs. Contribute the full payment of the Annual Required Contribution (ARC) for the Citys pension system. Establish and maintain adequate General Fund reserves according to City Charter Section 91 and the City Reserve Policy recently approved by the City Council. Address other significant financial obligations with a longer-term strategy.

Jerry Sanders; Jay M. Goldstone

2006-01-01T23:59:59.000Z

411

Methods of forming semiconductor devices and devices formed using such methods  

SciTech Connect

Single source precursors are subjected to carbon dioxide to form particles of material. The carbon dioxide may be in a supercritical state. Single source precursors also may be subjected to supercritical fluids other than supercritical carbon dioxide to form particles of material. The methods may be used to form nanoparticles. In some embodiments, the methods are used to form chalcopyrite materials. Devices such as, for example, semiconductor devices may be fabricated that include such particles. Methods of forming semiconductor devices include subjecting single source precursors to carbon dioxide to form particles of semiconductor material, and establishing electrical contact between the particles and an electrode.

Fox, Robert V; Rodriguez, Rene G; Pak, Joshua

2013-05-21T23:59:59.000Z

412

SLAC Dosimeter / ID Request Form A  

NLE Websites -- All DOE Office Websites (Extended Search)

Female Birth year (yyyy): Job title: Contact informationmailing address: City: State: Zip code: Country: DeptGroup: Phone number: Mail stop: Users or non-SLAC employees only:...

413

TMS Forms ICME Implementation Study Teams  

Science Conference Proceedings (OSTI)

During his 27 years as a senior technical leader at Ford Motor Company, he led teams pioneering ICME methods and helped develop advanced computer...

414

$sup 238$Pu fuel form activities  

SciTech Connect

This report for STYPu Fuel Form Activities has one main section: SRP-PuFF Facility. The SRL portion of this program has been completed. The program status, budget information, and milestone schedules are discussed. The SRP portion of this report summarizes production of STYPuO2 fuel forms for use in radioisotopic thermoelectric generators (RTG's) in the Plutonium Fuel Form (Puff) Facility at the Savannah River Plant. The PuFF Facility has been placed in a production readiness mode of operation pending funding of additional heat source programs.

1987-06-01T23:59:59.000Z

415

Plasma formed ion beam projection lithography system  

DOE Patents (OSTI)

A plasma-formed ion-beam projection lithography (IPL) system eliminates the acceleration stage between the ion source and stencil mask of a conventional IPL system. Instead a much thicker mask is used as a beam forming or extraction electrode, positioned next to the plasma in the ion source. Thus the entire beam forming electrode or mask is illuminated uniformly with the source plasma. The extracted beam passes through an acceleration and reduction stage onto the resist coated wafer. Low energy ions, about 30 eV, pass through the mask, minimizing heating, scattering, and sputtering.

Leung, Ka-Ngo (Hercules, CA); Lee, Yung-Hee Yvette (Berkeley, CA); Ngo, Vinh (San Jose, CA); Zahir, Nastaran (Greenbrae, CA)

2002-01-01T23:59:59.000Z

416

2011 Form EIA-63B Instructions  

U.S. Energy Information Administration (EIA) Indexed Site

U. S. DEPARTMENT OF ENERGY Form Approved U.S. ENERGY INFORMATION ADMINISTRATION OMB No. 1905-0196 Washington, DC 20585 Expires: 12/31/2013 FORM EIA-63B ANNUAL PHOTOVOLTAIC CELL/MODULE SHIPMENTS REPORT GENERAL INFORMATION AND INSTRUCTIONS I. Purpose Form EIA-63B is designed to provide the data necessary for the U.S. Energy Information Administration (EIA), a part of the U.S. Department of Energy (DOE), to carry out its responsibilities tracking photovoltaic cell/module shipments in the photovoltaic industry and

417

The NERSC Allocation Request Form (ERCAP)  

NLE Websites -- All DOE Office Websites (Extended Search)

NIM (NERSC Information Management portal) NIM (NERSC Information Management portal) Awarded projects Policies Data Analytics & Visualization Data Management Policies Science Gateways User Surveys NERSC Users Group User Announcements Help Operations for: Passwords & Off-Hours Status 1-800-66-NERSC, option 1 or 510-486-6821 Account Support https://nim.nersc.gov accounts@nersc.gov 1-800-66-NERSC, option 2 or 510-486-8612 Consulting http://help.nersc.gov consult@nersc.gov 1-800-66-NERSC, option 3 or 510-486-8611 How to Submit a 2014 ERCAP Request Home » For Users » Accounts & Allocations » Allocations » Allocation Request Form (ERCAP) Show All | 1 2 3 4 5 ... 16 | Next » The NERSC Allocation Request Form (ERCAP) Requests to use NERSC resources are submitted annually via a web form known as the ERCAP (Energy Research Computing Allocations Process) Request Form.

418

Benefits Forms and Information | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

New Employee Orientation » Benefits Forms and New Employee Orientation » Benefits Forms and Information Benefits Forms and Information As a Federal employee, you may have the opportunity to participate in a number of employee benefit and family-friendly programs. If your appointment to Federal employment confers eligibility, you may elect to participate in health, dental, and life insurance programs; retirement savings plans; flexible spending accounts; long-term care insurance; and vacation and sick leave. In addition, there are a number of family-friendly programs that the Department of Energy (DOE) offers its employees, such as alternative work schedules, flexiplace/telecommuting, transit subsidy, child development centers, and exercise and wellness facilities. The employment forms found in this section collect important and necessary

419

EOTA - Business Form Document Title: Nonconformance Report  

NLE Websites -- All DOE Office Websites (Extended Search)

5 Nonconformance Report 07_1206.doc 07_1206 Page 1 of 3 5 Nonconformance Report 07_1206.doc 07_1206 Page 1 of 3 EOTA - Business Form Document Title: Nonconformance Report Document Number: F-015 Rev. 07_12-06 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: P-011, Nonconforming Material / Product Process Notify of Changes: EOTA Employees Referenced Document(s): N/A F-015 Nonconformance Report 07_1206.doc 07_1206 Page 2 of 3 Revision History: Rev. Description of Change A Initial Release 07_1206 Converted form F-015 to a Word Form. Changed layout of form. No content changes were done. C D E F-015 Nonconformance Report 07_1206.doc 07_1206 Page 1 of 1 Nonconformance Report (NCR) General Information NCR # -

420

Design Code Survey Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Design Code Survey Form Design Code Survey Form Design Code Survey Form Survey of Safety Software Used in Design of Structures, Systems, and Components 1. Introduction The Department's Implementation Plan for Software Quality Assurance (SQA) that was developed in response to Defense Nuclear Facilities Safety Board Recommendation 2002-01, Quality Assurance for Safety-Related Software, includes a commitment (4.2.1.5) to conduct a survey of design codes currently in use to determine if any should be included as part of the toolbox codes. Design Code Survey Form September 11, 2003 More Documents & Publications Technical Standards, Safety Analysis Toolbox Codes - November 2003 DOE G 414.1-4, Safety Software Guide for Use with 10 CFR 830 Subpart A, Quality Assurance Requirements, and DOE O 414.1C, Quality Assurance

Note: This page contains sample records for the topic "form eia-860m year" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Form:Reference | Open Energy Information  

Open Energy Info (EERE)

Form Form Edit History Facebook icon Twitter icon » Form:Reference Jump to: navigation, search Input the title of a Reference below. If the reference already exists, you will be able to edit its information. Add/Edit Reference The text entered into this field will be used as the name of the reference; for example, the title of a book or name of the journal article. Example references Claritas Rise, Mars- Pre-Tharsis Magmatism? An Improved Equilibrium-Kinetics Speciation Algorithm For Redox Reactions In Variably Saturated Subsurface Flow Systems True-Temperature Determination Of Geothermal Reservoirs ... further results This form and reference requirements are based on the Council of Science Editors (CSE) (author-date) citation style. For more details about this

422

Form Approval: OMB No. 1905-0129  

U.S. Energy Information Administration (EIA) Indexed Site

Due Date: 2013 Due Date: 2013 Form Approval: OMB No. 1905-0129 Approval Expires: 12/31/2015 Burden hours: 0.75 SCHEDULE 1. IDENTIFICATION Contact Information Form EIA-861S ANNUAL ELECTRIC POWER INDUSTRY REPORT (Short Form) NOTICE: This report is mandatory under the Federal Energy Administration Act of 1974 (Public Law 93-275). Failure to comply may result in criminal fines, civil penalties and other sanctions as provided by law. For further information concerning sanctions and data protections see the provisions on sanctions and the provisions concerning the confidentiality of information in the instructions. Title 18 U.S.C. 1001 makes it a criminal offense for any person knowingly and willingly to make to any Agency or Department of the United States any false, fictitious, or fraudulent statements as to any matter within its jurisdiction. Entities that report using the Form EIA-861 do

423

Iterated Differential Forms II: Riemannian Geometry Revisited  

E-Print Network (OSTI)

A natural extension of Riemannian geometry to a much wider context is presented on the basis of the iterated differential form formalism developed in math.DG/0605113 and an application to general relativity is given.

A. M. Vinogradov; L. Vitagliano

2006-09-11T23:59:59.000Z

424

CIMS Course Application Form September 2013  

E-Print Network (OSTI)

CIMS Course Application Form 9th -13th September 2013 Name University/Company Address Address complete and return to Natalie Berge at: cims@surrey.ac.uk For applicants interested only in Part II

Doran, Simon J.

425

Front contact solar cell with formed emitter  

SciTech Connect

A bipolar solar cell includes a backside junction formed by an N-type silicon substrate and a P-type polysilicon emitter formed on the backside of the solar cell. An antireflection layer may be formed on a textured front surface of the silicon substrate. A negative polarity metal contact on the front side of the solar cell makes an electrical connection to the substrate, while a positive polarity metal contact on the backside of the solar cell makes an electrical connection to the polysilicon emitter. An external electrical circuit may be connected to the negative and positive metal contacts to be powered by the solar cell. The positive polarity metal contact may form an infrared reflecting layer with an underlying dielectric layer for increased solar radiation collection.

Cousins, Peter John (Menlo Park, CA)

2012-07-17T23:59:59.000Z

426

Assessment of Preferred Depleted Uranium Disposal Forms  

SciTech Connect

The Department of Energy (DOE) is in the process of converting about 700,000 metric tons (MT) of depleted uranium hexafluoride (DUF6) containing 475,000 MT of depleted uranium (DU) to a stable form more suitable for long-term storage or disposal. Potential conversion forms include the tetrafluoride (DUF4), oxide (DUO2 or DU3O8), or metal. If worthwhile beneficial uses cannot be found for the DU product form, it will be sent to an appropriate site for disposal. The DU products are considered to be low-level waste (LLW) under both DOE orders and Nuclear Regulatory Commission (NRC) regulations. The objective of this study was to assess the acceptability of the potential DU conversion products at potential LLW disposal sites to provide a basis for DOE decisions on the preferred DU product form and a path forward that will ensure reliable and efficient disposal.

Croff, A.G.; Hightower, J.R.; Lee, D.W.; Michaels, G.E.; Ranek, N.L.; Trabalka, J.R.

2000-06-01T23:59:59.000Z

427

Rearrangement Phylogeny of Genomes in Contig Form  

Science Conference Proceedings (OSTI)

There has been a trend in increasing phylogenetic coverage for genome sequencing while decreasing the sequencing coverage for each genome. With lower coverage, there is an increasing number of genomes being published in contig form. Rearrangement algorithms, ...

Adriana Muoz; David Sankoff

2009-04-01T23:59:59.000Z

428

A Bakery : in search of appropriate form  

E-Print Network (OSTI)

During the process of designing a building there occurs the continuous task of finding the forms, materials and structure that are fit to the particular building or situation at hand. It is the intent to combine these ...

Kuzmic, Katri

1982-01-01T23:59:59.000Z

429

TMS Fall Meeting '99 Registration Form  

Science Conference Proceedings (OSTI)

Nov 4, 1999 ... Focusing on physical metallurgy and materials, the 1999 TMS Fall Meeting will ... Print out this form, complete it, and fax or mail it to the TMS...

430

Form:Policy Organization | Open Energy Information  

Open Energy Info (EERE)

Add a Policy Organization Input your policy organization name below to add to the registry. If your policy organization is already in the registry, the form will be populated with...

431

FFSE/ISTA Online Membership Form  

NLE Websites -- All DOE Office Websites (Extended Search)

the tab key to go between text boxes; the keystrokes,"Return" and "Enter," have been disabled to avoid submitting the form prematurely. If you have questions about the membership...

432

Microsoft Word - Reservation Form.doc  

Science Conference Proceedings (OSTI)

RESERVATION FORM / ????? ???????????? Date: April 02-06, 2013 / ????: 02-06 ?????? 2013 ?. Special Guest Room Rate for AOCS group / ??????????? ???? ??? ?????? (Group code G-PO58) King room, 230 Euro, including VAT (20%), inc

433

Perfect Implementation of Normal-Form Mechanisms  

E-Print Network (OSTI)

Privacy and trust affect our strategic thinking, yet they have not been precisely modeled in mechanism design. In settings of incomplete information, traditional implementations of a normal-form mechanism ---by disregarding ...

Izmalkov, Sergei

434

DRAFT STAFF REPORT FORMS AND INSTRUCTIONS FOR  

E-Print Network (OSTI)

plans showing how demand for energy and annual peak load will be met by specific supply)............................................................. 20 Supply Form S-2: Energy Balance Table RESOURCE PLANS Prepared in Support of the 2013 Integrated Energy Policy Report

435

Dry lubricant films for aluminum forming.  

DOE Green Energy (OSTI)

During metal forming process, lubricants are crucial to prevent direct contact, adhesion, transfer and scuffing of workpiece materials and tools. Boric acid films can be firmly adhered to the clean aluminum surfaces by spraying their methanol solutions and provide extremely low friction coefficient (about 0.04). The cohesion strengths of the bonded films vary with the types of aluminum alloys (6061, 6111 and 5754). The sheet metal forming tests indicate that boric acid films and the combined films of boric acid and mineral oil can create larger strains than the commercial liquid and solid lubricants, showing that they possess excellent lubricities for aluminum forming. SEM analyses indicate that boric acid dry films separate the workpiece and die materials, and prevent their direct contact and preserve their surface qualities. Since boric acid is non-toxic and easily removed by water, it can be expected that boric acid films are environmentally friendly, cost effective and very efficient lubricants for sheet aluminum cold forming.

Wei, J.; Erdemir, A.; Fenske, G. R.

1999-03-30T23:59:59.000Z

436

Precipitation in Spray-Formed IN 718  

Science Conference Proceedings (OSTI)

Treatment of the spray formed alloy at 1025 and 1010C led to no 6 phase in the microstructure .... partial funding of this work. References. 1. E.E. Brown and...

437

Photochromic sculpture: volumetric color-forming pixels  

Science Conference Proceedings (OSTI)

In contrast to light-emitting displays like plasma display panels (PDPs) and liquid crystal displays (LCDs), color-forming displays like "E-Ink" which displays information by reflecting surrounding light are being actively researched as a technology ...

Tomoko Hashida; Yasuaki Kakehi; Takeshi Naemura

2011-08-01T23:59:59.000Z

438

A Note on the Jordan Canonical Form  

E-Print Network (OSTI)

A proof of the Jordan canonical form, suitable for a first course in linear algebra, is given. The proof includes the uniqueness of the number and sizes of the Jordan blocks.

Azad, H

2010-01-01T23:59:59.000Z

439

DUF6 Final EIS Document Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

EIS Request Form EIS Request Form Final EIS Document Request Form Use the form below to order copies of the DUF6 Conversion Facility Final EISs and Records of Decision. Step 3 Select the EIS that you want to receive. Select one of the three options below. My request applies to the Paducah Conversion Facility EIS My request applies to the Portsmouth Conversion Facility EIS My request applies to both the Paducah and the Portsmouth Conversion Facility EISs Step 1 Request EIS copies. Choose one or more of the following: Mail me a compact disc (CD-ROM) of the Final EIS and Record of Decision. Mail me a printed copy of the Final EIS and Record of Decision. Step 2 Enter your personal information. You must submit your full name and complete address including zip code to receive postal mail. You must provide an email address if you want to receive email notifications.

440

Electronic Forms & Pen Computers Improve Building Commissioning  

NLE Websites -- All DOE Office Websites (Extended Search)

Electronic Forms & Pen Computers Improve Building Commissioning Speaker(s): Rich Sydlowski Date: August 8, 2001 - 12:00pm Location: Bldg. 90 Seminar HostPoint of Contact:...

Note: This page contains sample records for the topic "form eia-860m year" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Directory of Energy Data Collection Forms: Forms in use as of October 1996  

SciTech Connect

This is the twentieth edition of the Directory of Energy Collection Data Forms, an authoritative listing of selected public use forms currently used as basic energy information gathering tools by the Department of Energy.

NONE

1996-12-01T23:59:59.000Z

442

Innovative forming and fabrication technologies : new opportunities.  

Science Conference Proceedings (OSTI)

The advent of light metal alloys and advanced materials (polymer, composites, etc.) have brought the possibility of achieving important energy reductions into the full life cycle of these materials, especially in transportation applications. 1 These materials have gained acceptance in the aerospace industry but use of light metal alloys needs to gain wider acceptance in other commercial transportation areas. Among the main reasons for the relatively low use of these materials are the lack of manufacturability, insufficient mechanical properties, and increased material costs due to processing inefficiencies. Considering the enormous potential energy savings associated with the use of light metal alloys and advanced materials in transportation, there is a need to identify R&D opportunities in the fields of materials fabrication and forming aimed at developing materials with high specific mechanical properties combined with energy efficient processes and good manufacturability. This report presents a literature review of the most recent developments in the areas of fabrication and metal forming focusing principally on aluminum alloys. In the first section of the document, the different sheet manufacturing technologies including direct chill (DC) casting and rolling, spray forming, spray rolling, thin slab, and strip casting are reviewed. The second section of the document presents recent research on advanced forming processes. The various forming processes reviewed are: superplastic forming, electromagnetic forming, age forming, warm forming, hydroforming, and incremental forming. Optimization of conventional forming processes is also discussed. Potentially interesting light metal alloys for high structural efficiency including aluminum-scandium, aluminum-lithium, magnesium, titanium, and amorphous metal alloys are also reviewed. This section concludes with a discussion on alloy development for manufacturability. The third section of the document reviews the latest developments in fiber-reinforced composite materials. Emerging curing processes are presented along with a discussion on the possible developments in biocomposite materials. The fourth section presents recent developments in the fabrication of bulk nanomaterials and nanoparticles reinforced materials. Advanced joining technologies are presented in the fifth section. Future research is proposed in the last section.

Davis, B.; Hryn, J.; Energy Systems; Kingston Process Metallurgy, Inc.

2008-01-31T23:59:59.000Z

443

Fiscal Year 2012 Revegetation Assessment  

Science Conference Proceedings (OSTI)

This report summarizes the Fiscal Year 2012 Revegetation Assessment by Battelle Energy Alliance, LLC. This assessment was conducted to supplement documentation related to the Storm Water Pollution Prevention Plan for Construction Activities and to ensure that disturbed vegetation and soil at various locations are being restored. This report provides the following information for each site being monitored by the Idaho National Laboratory Environmental Support and Services: Summary of each site Assessment of vegetation status and site stabilization at each location Actions and Resolutions for each site. Ten disturbed sites were evaluated for this assessment. Six have achieved final stabilization. The remaining four sites not meeting the criteria for final stabilization will be evaluated again in the next fiscal year.

Jenifer Nordstrom

2012-11-01T23:59:59.000Z

444

SEPARATIONS AND WASTE FORMS CAMPAIGN IMPLEMENTATION PLAN  

SciTech Connect

This Separations and Waste Forms Campaign Implementation Plan provides summary level detail describing how the Campaign will achieve the objectives set-forth by the Fuel Cycle Reasearch and Development (FCRD) Program. This implementation plan will be maintained as a living document and will be updated as needed in response to changes or progress in separations and waste forms research and the FCRD Program priorities.

Vienna, John D.; Todd, Terry A.; Peterson, Mary E.

2012-11-26T23:59:59.000Z

445

Method of forming a chemical composition  

DOE Patents (OSTI)

A method of forming a chemical composition such as a chemical hydride is described and which includes the steps of selecting a composition having chemical bonds and which is capable of forming a chemical hydride; providing a source of hydrogen; and exposing the selected composition to an amount of ionizing radiation to encourage the changing of the chemical bonds of the selected composition, and chemically reacting the selected composition with the source of hydrogen to facilitate the formation of a chemical hydride.

Bingham, Dennis N. (Idaho Falls, ID); Wilding, Bruce M. (Idaho Falls, ID); Klingler, Kerry M. (Idaho Falls, ID); Zollinger, William T. (Idaho Falls, ID); Wendt, Kraig M. (Idaho Falls, ID)

2007-10-09T23:59:59.000Z

446

Method for forming cooperative binary ionic solids  

DOE Patents (OSTI)

A nanostructured molecular unit and method for forming is described where a cationic porphyrin having an ethanolic substituent species and a metal in the porphyrin cavity is combined with an anionic porphyrin having a sulfonate substituent species and a metal in the porphyrin cavity to form by self-assembly a nanostructured molecular unit with a morphology comprising four dendritic elements connected at a central node.

Shelnutt, John A.; Martin, Kathleen E.; Wang, Zhongchun; Medforth, Craig J.

2013-03-05T23:59:59.000Z

447

10-Year Outlook Executive Summary  

E-Print Network (OSTI)

Ontarios electricity system faces significant challenges over the next 10 years. The uncertainty surrounding the return to service of Pickering A nuclear units, the lack of new generation investment and the commitment to shut down 7,500 MW of coal fired generation by December 31, 2007, all contribute to a potentially severe shortfall. New transmission, supply and demand side initiatives are urgently needed to address this gap and secure Ontarios energy future. The need is most pressing in the Toronto area, to deal with the immediate impact of the April 30, 2005 shutdown of the Lakeview Thermal Generating Station. Plans are being implemented to address this in the short term. In the longer term, additional generation is also required in the Toronto area to replace the Lakeview generating capacity and to meet load growth in the Greater Toronto Area (GTA). Each year the Independent Electricity Market Operator (IMO) publishes an integrated assessment of the security and adequacy of the Ontario electricity system over the next 10 years. This report presents the IMO assessment for the 10-year period from 2005 to 2014. It is based on the IMOs forecast of electricity demand, information provided by Ontario generators on the supply that will be available and the latest information on the configuration and capability of the transmission system. Electricity Supply Outlook Additional Ontario electricity supply and demand-side measures are required to maintain supply adequacy into the future and to reduce Ontarios dependency on supply from other jurisdictions.

unknown authors

2005-01-01T23:59:59.000Z

448

BERA Forms, Brookhaven Employees Recreation Association (BERA)  

NLE Websites -- All DOE Office Websites (Extended Search)

Forms Forms PDF Adobe Acrobat Reader is needed to view some files on this page. Get Reader | troubleshoot Request to serve Alcohol on-Site Form and Alcohol Policy (pdf) Guidelines to start a new BERA Club/Activity (pdf) Injury Report Form (pdf) Confirmation of Medical Insurance Receipt (pdf) BERA Club Activities - Insurance Information Weight Room or fitness activities: Any contractor or family member (this includes spouse/partner, adult children, guests/contractors) wishing to use the Weight Room MUST present a copy of their medical insurance card and initial a receipt that states they have insurance in place in order to participate in any fitness activities or the weight room. The Recreation Office (Bldg 400) will keep this receipt on file. BERA League Sports: BSA paid employees must fill out this BERA Sports Clearance Form* (pdf) and go through the clearance procedure with OMC @ 490 (not BERA Office). Once reviewed by OMC, the clearance form will be mailed to the player who must then furnish a copy to the captain in order to practice or play.

449

Process for forming transparent aerogel insulating arrays  

DOE Patents (OSTI)

An improved supercritical drying process for forming transparent silica aerogel arrays is described. The process is of the type utilizing the steps of hydrolyzing and condensing aloxides to form alcogels. A subsequent step removes the alcohol to form aerogels. The improvement includes the additional step, after alcogels are formed, of substituting a solvent, such as CO/sub 2/, for the alcohol in the alcogels, the solvent having a critical temperature less than the critical temperature of the alcohol. The resulting gels are dried at a supercritical temperature for the selected solvent, such as CO/sub 2/, to thereby provide a transparent aerogel array within a substantially reduced (days-to-hours) time period. The supercritical drying occurs at about 40/sup 0/C instead of at about 270/sup 0/C. The improved process provides increased yields of large scale, structurally sound arrays. The transparent aerogel array, formed in sheets or slabs, as made in accordance with the improved process, can replace the air gap within a double glazed window, for example, to provide a substantial reduction in heat transfer. The thus formed transparent aerogel arrays may also be utilized, for example, in windows of refrigerators and ovens, or in the walls and doors thereof or as the active material in detectors for analyzing high energy elementary particles or cosmic rays.

Tewari, P.H.; Hunt, A.J.

1985-09-04T23:59:59.000Z

450

Radionuclide Retention in Concrete Waste Forms  

Science Conference Proceedings (OSTI)

Assessing long-term performance of Category 3 waste cement grouts for radionuclide encasement requires knowledge of the radionuclide-cement interactions and mechanisms of retention (i.e., sorption or precipitation); the mechanism of contaminant release; the significance of contaminant release pathways; how waste form performance is affected by the full range of environmental conditions within the disposal facility; the process of waste form aging under conditions that are representative of processes occurring in response to changing environmental conditions within the disposal facility; the effect of waste form aging on chemical, physical, and radiological properties; and the associated impact on contaminant release. This knowledge will enable accurate prediction of radionuclide fate when the waste forms come in contact with groundwater. The information presented in the report provides data that 1) quantify radionuclide retention within concrete waste form materials similar to those used to encapsulate waste in the Low-Level Waste Burial Grounds (LLBG); 2) measure the effect of concrete waste form properties likely to influence radionuclide migration; and 3) quantify the stability of uranium-bearing solid phases of limited solubility in concrete.

Mattigod, Shas V.; Bovaird, Chase C.; Wellman, Dawn M.; Wood, Marcus I.

2010-09-30T23:59:59.000Z

451

Process for forming transparent aerogel insulating arrays  

DOE Patents (OSTI)

An improved supercritical drying process for forming transparent silica aerogel arrays is described. The process is of the type utilizing the steps of hydrolyzing and condensing aloxides to form alcogels. A subsequent step removes the alcohol to form aerogels. The improvement includes the additional step, after alcogels are formed, of substituting a solvent, such as CO.sub.2, for the alcohol in the alcogels, the solvent having a critical temperature less than the critical temperature of the alcohol. The resulting gels are dried at a supercritical temperature for the selected solvent, such as CO.sub.2, to thereby provide a transparent aerogel array within a substantially reduced (days-to-hours) time period. The supercritical drying occurs at about 40.degree. C. instead of at about 270.degree. C. The improved process provides increased yields of large scale, structurally sound arrays. The transparent aerogel array, formed in sheets or slabs, as made in accordance with the improved process, can replace the air gap within a double glazed window, for example, to provide a substantial reduction in heat transfer. The thus formed transparent aerogel arrays may also be utilized, for example, in windows of refrigerators and ovens, or in the walls and doors thereof or as the active material in detectors for analyzing high energy elementry particles or cosmic rays.

Tewari, Param H. (Milpitas, CA); Hunt, Arlon J. (Oakland, CA)

1986-01-01T23:59:59.000Z

452

Year STB EIA STB EIA  

U.S. Energy Information Administration (EIA) Indexed Site

Release Date: November 16, 2012 Release Date: November 16, 2012 Barge Truck Total delivered cost per short ton Shipments with transportation rates over total shipments Total delivered cost per short ton Shipments with transportation rates over total shipments Year (nominal) (real) (real) (percent) (nominal) (real) (real) (percent) 2008 $6.26 $5.77 $36.50 15.8% 42.3% $6.12 $5.64 $36.36 15.5% 22.2% 2009 $6.23 $5.67 $52.71 10.8% 94.8% $4.90 $4.46 $33.18 13.5% 25.1% 2010 $6.41 $5.77 $50.83 11.4% 96.8% $6.20 $5.59 $36.26 15.4% 38.9% Annual Percent Change First to Last Year 1.2% 0.0% 18.0% - - 0.7% -0.4% -0.1% - - Latest 2 Years 2.9% 1.7% -3.6% - - 26.6% 25.2% 9.3% - - - = No data reported or value not applicable STB Data Source: The Surface Transportation Board's 900-Byte Carload Waybill Sample

453

Method of forming metallic coatings on polymeric substrates and of forming graded polymeric coatings or films  

DOE Patents (OSTI)

The invention described herein relates to methods of forming graded polymeric coatings or films on a desired substrate and of forming metallic coatings on polymeric or other nonmetallic substrates. In particular, it relates to methods of forming such coatings or films by sorption and/or diffusion of metals into coatings or films of polymeric material deposited by conventional techniques on a desired substrate.

Liepins, R.

1981-03-11T23:59:59.000Z

454

Directory of Energy Data Collection Forms: Forms in use as of October 1993  

Science Conference Proceedings (OSTI)

This is the seventeenth edition of the Directory of Energy Data Collection forms, an authoritative listing of selected public use forms currently used as basic energy information gathering tools by the Department of Energy (DOE). Originally entitled EIA Data Collection forms, this directory provides an overview of DOE`s energy information collection programs for decisionmakers in Government and industry.

Not Available

1993-12-28T23:59:59.000Z

455

Spray forming lead strip. Final report  

SciTech Connect

A cooperative research project was conducted between the Idaho National Engineering Laboratory (INEL) and Johnson Controls, Inc. (JCI) to adapt the INEL spray forming process to produce near-net-shape lead alloy strip. The emphasis of the work was to spray form lead strip samples at INEL, using a variety of spray conditions, for characterization at JCI. An existing glove box apparatus was modified at INEL to spray form lead. The main spray forming components were housed inside the glove box. They included a spray nozzle, tundish (crucible), substrate assembly, gas heater and furnaces to heat the nozzle and tundish. To spray form metal strip, liquid metal was pressure-fed at a controlled rate through a series of circular orifices that span the width of the nozzle. There the metal contacted high velocity, high temperature inert gas (nitrogen) which atomized the molten material into fine droplets, entrained the droplets in a directed flow, and deposited them onto glass plates that were swept through the spray plume to form strip samples. In-flight convection cooling of the droplets followed by conduction and convection cooling at the substrate resulted in rapid solidification of the deposit. During operation, the inside of the glove box was purged with an inert gas to limit the effects of in-flight oxidation of the particles and spray-formed strips, as well as to protect personnel from exposure to airborne lead particulate. Remote controls were used to start/stop the spray and control the speed and position of the substrate. In addition, substrate samples were loaded into the substrate translator manually using the gloved side ports of the box. In this way, the glove box remained closed during a series of spray trials, and was opened only when loading the crucible with a lead charge or when removing lead strip samples for shipment to JCI.

McHugh, K.

1996-04-10T23:59:59.000Z

456

Method of forming aluminum oxynitride material and bodies formed by such methods  

DOE Patents (OSTI)

Methods of forming aluminum oxynitride (AlON) materials include sintering green bodies comprising aluminum orthophosphate or another sacrificial material therein. Such green bodies may comprise aluminum, oxygen, and nitrogen in addition to the aluminum orthophosphate. For example, the green bodies may include a mixture of aluminum oxide, aluminum nitride, and aluminum orthophosphate or another sacrificial material. Additional methods of forming aluminum oxynitride (AlON) materials include sintering a green body including a sacrificial material therein, using the sacrificial material to form pores in the green body during sintering, and infiltrating the pores formed in the green body with a liquid infiltrant during sintering. Bodies are formed using such methods.

Bakas, Michael P. (Ammon, ID); Lillo, Thomas M. (Idaho Falls, ID); Chu, Henry S. (Idaho Falls, ID)

2010-11-16T23:59:59.000Z

457

Meteorology: typical meteorological year data for selected stations in  

Open Energy Info (EERE)

Central America from NREL Central America from NREL Dataset Summary Description (Abstract): A data set of hourly values of solar radiation and meteorological elements for a 1-year period. (Purpose): Simulations (Supplemental Information): A TMY consists of months selected from individual years and concatenated to form a complete year. The intended use is for computer simulations of solar energy conversion systems and building systems. Because of the selection criteria, these TMYs are not appropriate for simulations of wind energy conversion systems.A TMY provides a standard for hourly data for solar radiation and other meteorological elements that permit performance comparisons of system types and configurations for one or more locations. A TMY is not necessarily a good indicator of conditions over the next year, or even

458

Meteorology: typical meteorological year data for selected stations in Cuba  

Open Energy Info (EERE)

Cuba Cuba from NREL Dataset Summary Description (Abstract): A data set of hourly values of solar radiation and meteorological elements for a 1-year period. (Purpose): Simulations (Supplemental Information): A TMY consists of months selected from individual years and concatenated to form a complete year. The intended use is for computer simulations of solar energy conversion systems and building systems. Because of the selection criteria, these TMYs are not appropriate for simulations of wind energy conversion systems.A TMY provides a standard for hourly data for solar radiation and other meteorological elements that permit performance comparisons of system types and configurations for one or more locations. A TMY is not necessarily a good indicator of conditions over the next year, or even

459

Directory of energy data collection forms. Forms in use as of October 1995  

SciTech Connect

This is an authoritative listing of selected public use forms currently used as basic energy information gathering tools by the Department of Energy (DOE). This directory provides an overview of DOE`s energy information collection programs for decisionmakers in Government and industry. Forms designed to collect energy information and used by the Energy Information Administration (EIA) as of October 1995 are included in this directory. For each form listed in this directory, an abstract is included that describes the form`s uses, its respondents, and the data collected. For the reader`s convenience in finding specific types of collections, several indices have been provided in this directory. A listing of the forms grouped by energy source and function begins on page 26. Beginning on page 38 are the publications derived from the collections, and on page 50, are the forms linked to general respondent categories.

NONE

1996-01-01T23:59:59.000Z

460

Fiscal Year 2009 Revegetation Assessment  

SciTech Connect

This report summarizes the Fiscal Year 2009 Revegetation Assessment by Battelle Energy Alliance, LLC. This assessment was conducted to supplement documentation related to the Storm Water Pollution Prevention Plan for Construction Activities and to ensure that disturbed vegetation and soil at various locations are being restored. This report provides the following information for each site being monitored by the Idaho National Laboratory Environmental Support and Services: Summary of each site Assessment of vegetation status and site stabilization at each location Recommendation(s) for each site.

Michael Lewis

2009-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "form eia-860m year" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Fiscal Year 2010 Revegetation Assessment  

SciTech Connect

This report summarizes the Fiscal Year 2010 Revegetation Assessment by Battelle Energy Alliance, LLC. This assessment was conducted to supplement documentation related to the Storm Water Pollution Prevention Plan for Construction Activities and to ensure that disturbed vegetation and soil at various locations are being restored. This report provides the following information for each site being monitored by the Idaho National Laboratory Environmental Support and Services: Summary of each site Assessment of vegetation status and site stabilization at each location Recommendation(s) for each site.

Jenifer Nordstrom; Mike Lewis

2010-11-01T23:59:59.000Z

462

Recent INEL spray-forming developments  

SciTech Connect

Spray forming is a near-net-shape fabrication technology in which a spray of finely atomized liquid droplets is deposited onto a suitably shaped substrate or mold to produce a coherent solid. The technology offers unique opportunities for simplifying materials processing, oftentimes while substantially improving product quality. Spray forming can be performed with a wide range of metals and nonmetals, and offersproperty improvements resulting from rapid solidification (eg. refined microstructures, extended solid solubilities and reduced segregation). Economic benefits result from process simplification and the elimination of unit operations. Researchers at the Idaho National Engineering Laboratory (INEL) are developing spray-forming technology for producing near-net-shape solids and coatings of a variety of metals, polymers, and composite materials using de Laval nozzles. Results from several spray-forming programs are presented to illustrate the range of capabilities of the approach as well as the technical and economic benefits. These programs involved the production of low-carbon steel strip and SiC particulate reinforced aluminum strip; recent advances in spray forming tooling using low-melting-point metals are also described.

McHugh, K.M.; Key, J.F.

1992-01-01T23:59:59.000Z

463

Recent INEL spray-forming developments  

SciTech Connect

Spray forming is a near-net-shape fabrication technology in which a spray of finely atomized liquid droplets is deposited onto a suitably shaped substrate or mold to produce a coherent solid. The technology offers unique opportunities for simplifying materials processing, oftentimes while substantially improving product quality. Spray forming can be performed with a wide range of metals and nonmetals, and offersproperty improvements resulting from rapid solidification (eg. refined microstructures, extended solid solubilities and reduced segregation). Economic benefits result from process simplification and the elimination of unit operations. Researchers at the Idaho National Engineering Laboratory (INEL) are developing spray-forming technology for producing near-net-shape solids and coatings of a variety of metals, polymers, and composite materials using de Laval nozzles. Results from several spray-forming programs are presented to illustrate the range of capabilities of the approach as well as the technical and economic benefits. These programs involved the production of low-carbon steel strip and SiC particulate reinforced aluminum strip; recent advances in spray forming tooling using low-melting-point metals are also described.

McHugh, K.M.; Key, J.F.

1992-12-31T23:59:59.000Z

464

FORMED CORE SAMPLER HYDRAULIC CONDUCTIVITY TESTING  

SciTech Connect

A full-scale formed core sampler was designed and functionally tested for use in the Saltstone Disposal Facility (SDF). Savannah River National Laboratory (SRNL) was requested to compare properties of the formed core samples and core drilled samples taken from adjacent areas in the full-scale sampler. While several physical properties were evaluated, the primary property of interest was hydraulic conductivity. Differences in hydraulic conductivity between the samples from the formed core sampler and those representing the bulk material were noted with respect to the initial handling and storage of the samples. Due to testing conditions, the site port samples were exposed to uncontrolled temperature and humidity conditions prior to testing whereas the formed core samples were kept in sealed containers with minimal exposure to an uncontrolled environment prior to testing. Based on the results of the testing, no significant differences in porosity or density were found between the formed core samples and those representing the bulk material in the test stand.

Miller, D.; Reigel, M.

2012-09-25T23:59:59.000Z

465

10-Year Outlook Executive Summary  

E-Print Network (OSTI)

This report presents an assessment of the security and adequacy of the Ontario Electricity System for the 10-year period from 2003 to 2012. This assessment is based on forecasts of electricity demand and available supply combined with current information on the configuration and capability of the transmission system. Based on existing and proposed facilities, Ontario is expected to have a reliable supply of electricity during the forecast period under a wide-variety of conditions. Opportunities also exist for additional enhancements to improve the efficiency of the Ontario electricity market. The assessments in this report were made based on a number of key planning assumptions. Assuming a median growth scenario, the energy demand is forecast to grow over the study period from 151 terawatt-hours (TWh) in 2003 to 164 TWh in 2012, at an average annual growth rate of 0.9%. Peak demands are forecast to increase from about 24,000 MW in 2003 to 26,000 MW in 2012 at an average annual growth rate of 0.9%. Under normal weather conditions, Ontario is expected to be summer peaking by 2008. However, given the high variability of summer peak demands, there is a possibility that actual summer peaks may be higher than the winter peaks in some or all of the years before 2008, as has been the case in the recent past. In addition to the

unknown authors

2003-01-01T23:59:59.000Z

466

New Species of Cyanobacteria Forms Intracellular Carbonates  

NLE Websites -- All DOE Office Websites (Extended Search)

timing of cyanobacteria appearance is still debated, but there is a consensus on an age older than 2.3 billion years, since that is approximately when O2 began to appear in...

467

2011 Form EIA-63A Instructions  

U.S. Energy Information Administration (EIA) Indexed Site

U. S. DEPARTMENT OF ENERGY U. S. DEPARTMENT OF ENERGY Form Approved U.S. ENERGY INFORMATION ADMINISTRATION OMB No. 1905-0196 Washington, DC 20585 Expires: 12/31/2013 FORM EIA-63A ANNUAL SOLAR THERMAL COLLECTOR/REFLECTOR SHIPMENTS REPORT GENERAL INFORMATION AND INSTRUCTIONS I. Purpose Form EIA-63A is designed to provide the data necessary for the U.S. Energy Information Administration (EIA), a part of the U.S. Department of Energy (DOE), to carry out its responsibilities tracking collector/reflector shipments in the solar thermal industry and reporting information concerning the size and status of the industry. The data collected will be published in the Renewable Energy Annual and also be available through EIA's Internet site at http://www.eia.gov/fuelrenewable.html.

468

Security Forms and Information | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Services » New Employee Orientation » Security Forms and Services » New Employee Orientation » Security Forms and Information Security Forms and Information Homeland Security Presidential Directive HSPD-12 established new policy for a common identification standard for Federal Employees and contractors. As of October 27, 2005, all new Federal employees assigned to the DOE Headquarters complex are required to present two identity source documents (i.e., U.S. Passport, driver's license, identification card with photograph issued by a Federal, state, or local government agency, etc.), have their fingerprints taken, and undergo a background investigation (the identity proofing process) prior to reporting for duty or being issued a DOE standard badge (identity or PIV badge). Most likely, your HR representative and/or administrative personnel have

469

FAQs for Survey Form EIA-182  

Gasoline and Diesel Fuel Update (EIA)

FAQs for Survey Form EIA-182 FAQs for Survey Form EIA-182 What is the purpose of this survey? Form EIA-182, "Domestic Crude Oil First Purchase Report" is designed to collect data on both the average cost and volume associated with the physical and financial transfer of domestic crude oil off the property on which it was produced. The monthly reported data represent the initial market value and volume of domestic crude oil production. What are the published domestic crude oil first purchase prices? The domestic crude oil first purchase price is associated with only those companies that purchase crude oil the moment the oil leaves the lease on which it was produced. Companies are asked to report the average cost per barrel and total volume purchased for requested crude streams purchased in

470

FAQs for Survey Form EIA-14  

Gasoline and Diesel Fuel Update (EIA)

Form EIA-14 Form EIA-14 What is the purpose of this survey? Form EIA-14, "Refiners' Monthly Cost Report" is designed to collect summary data regarding crude oil prices by Petroleum Administration for Defense Districts (PADDs). The data are used to provide the government and the public monthly prices on refiner acquisition cost of crude oil. How are my data used to publish Refiner Acquisition Cost of Crude Oil? Your data, total cost and total volume, is combined with the data of other respondents. The sum of the costs for data from all of the respondents is divided by the sum of the volumes to calculate the Refiner Acquisition Cost (RAC) of crude oil. The composite RAC is the average cost of both domestic and imported crude oil. Where can I find the published data?

471

Forms & Applications | Stanford Synchrotron Radiation Lightsource  

NLE Websites -- All DOE Office Websites (Extended Search)

Forms & Applications Forms & Applications Forms: Before You Arrive User Information Log in to the User Portal to Register or Update Contact Informatioin Proposals Submit Proposals via User Portal (including Rapid Access and Letters of Intent) Proposal Extension Requests X-ray/VUV/SMB Macromolecular Crystallography (MC) User Agreements Non-Proprietary User Agreement Proprietary Research User Agreement Beam Time & Support Requests Log in to User Portal to Submit Beam Time or User Support Requests Computer Account X-ray/VUV/SMB Macromolecular Crystallography Use of SLAC Information Resources (submit with account request) User Financial Account User Financial Account Gas & Cryogenics Liquid Helium & Standard/Specialty Shipping & Receiving Hazardous Materials Shipper Non-Hazardous Materials Shipper

472

FAQs for Survey Forms 805 and 815  

Gasoline and Diesel Fuel Update (EIA)

Forms 805 and 815 Forms 805 and 815 On the EIA-815 survey, what should be reported in the "Fuel Uses & Losses During Month" column? The fuel use and loss column should only be used to report losses caused by spills, fires, contamination, and volumes used as fuel at a terminal. Data reported in these cells and all cells on the EIA-815 survey should always be positive. Do not use the fuel uses and losses column to correct line imbalances due to rounding. Line imbalances due to heat or pressure related variations, gauging problems, accounting adjustments and rounding that are less than or equal to 5 thousand barrels are acceptable. Line imbalances larger than 5 thousand barrels should be investigated for possible errors. EIA-805 Survey form & instructions Contact: Robert Merriam,

473

FAQs for Survey Forms 809 and 819  

Gasoline and Diesel Fuel Update (EIA)

9 and 819 9 and 819 EIA-809 (Weekly Oxygenate Report) How do I submit the form? There are four ways to submit the EIA-809 form. Secure File Transfer: https://signon.eia.doe.gov/upload/noticeoog.jsp The Secure File Transfer System uses the secure hypertext transfer protocol (HTTPS), an industry standard method to send information over the web using secure, encrypted processes. Electronic Filing Option: The PC Electronic Data Reporting Option (PEDRO) is a Windows-based application that will enable you to enter data interactively, import data from your own database, validate your data online, and transmit the encrypted data electronically to EIA via the Internet or a dial-up modem. To receive this free software call (202) 586-9659. Email: oog.surveys@eia.gov Fax forms to: (202) 586-1076

474

Paramagnetic form factors from itinerant electron theory  

Science Conference Proceedings (OSTI)

Elastic neutron scattering experiments performed over the past two decades have provided accurate information about the magnetic form factors of paramagnetic transition metals. These measurements have traditionally been analyzed in terms of an atomic-like theory. There are, however, some cases where this procedure does not work, and there remains the overall conceptual problem of using an atomistic theory for systems where the unpaired-spin electrons are itinerant. We have recently developed computer codes for efficiently evaluating the induced magnetic form factors of fcc and bcc itinerant electron paramagnets. Results for the orbital and spin contributions have been obtained for Cr, Nb, V, Mo, Pd and Rh based on local density bands. By using calculated spin enhancement parameters, we find reasonable agreement between theory and neutron form factor data. In addition, these zero parameter calculations yield predictions for the bulk susceptibility on an absolute scale which are in reasonable agreement with experiment in all treated cases except palladium.

Cooke, J.F.; Liu, S.H.; Liu, A.J.

1984-09-01T23:59:59.000Z

475

Mixed low-level waste form evaluation  

Science Conference Proceedings (OSTI)

A scoping level evaluation of polyethylene encapsulation and vitreous waste forms for safe storage of mixed low-level waste was performed. Maximum permissible radionuclide concentrations were estimated for 15 indicator radionuclides disposed of at the Hanford and Savannah River sites with respect to protection of the groundwater and inadvertent intruder pathways. Nominal performance improvements of polyethylene and glass waste forms relative to grout are reported. These improvements in maximum permissible radionuclide concentrations depend strongly on the radionuclide of concern and pathway. Recommendations for future research include improving the current understanding of the performance of polymer waste forms, particularly macroencapsulation. To provide context to these estimates, the concentrations of radionuclides in treated DOE waste should be compared with the results of this study to determine required performance.

Pohl, P.I.; Cheng, Wu-Ching; Wheeler, T.; Waters, R.D.

1997-03-01T23:59:59.000Z

476

Density of Spray-Formed Materials  

SciTech Connect

Spray Forming is an advanced materials processing technology that transforms molten metal into a near-net-shape solid by depositing atomized droplets onto a substrate. Depending on the application, the spray-formed material may be used in the as-deposited condition or it may undergo post-deposition processing. Regardless, the density of the as-deposited material is an important issue. Porosity is detrimental because it can significantly reduce strength, toughness, hardness and other properties. While it is not feasible to achieve fully-dense material in the as-deposited state, density greater than 99% of theoretical density is possible if the atomization and impact conditions are optimized. Thermal conditions at the deposit surface and droplet impact angle are key processing parameters that influence the density of the material. This paper examines the factors that contribute to porosity formation during spray forming and illustrates that very high as-deposited density is achieved by optimizing processing parameters.

Kevin M. McHugh; Volker Uhlenwinkel; Nils Ellendr

2008-06-01T23:59:59.000Z

477

APS Visitor Registration Form | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

APS Visitor Registration Form APS Visitor Registration Form To request access as a visitor who will not do hands-on work, please complete this form. For assistance, contact the APS User Office by phone at (630) 252-9090 or by email at apsuser@aps.anl.gov. Please request access directly by contacting the APS User Office by phone at (630) 252-9090 or by email at apsuser@aps.anl.gov. If you are concerned about sending your passport and visa information, leave those fields blank and fax a letter to (630) 252-9250. To Request APS Visitor Registration, please enter the following: * indicates required field First Name*: Middle Initial/Name*: Last Name*: Title: Organization*: Department: Address 1*: Address 2: City*: State*: Zip Code*: Country: Phone*: Fax: E-mail Address*: Gender*: Female

478

Document Certification and Transmittal Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Transmittal Form Document Certification and Transmittal Form Use this form to submit a NEPA document to the Office of NEPA Policy and Compliance for website posting....

479

Annual Electric Utility Data - Form EIA-906 Database  

U.S. Energy Information Administration (EIA) Indexed Site

Detailed data files > Historic Form EIA-906 Historic Form EIA-906 Detailed Data with previous form data (EIA-759) Historic electric utility data files include information on net...

480

DOE Emergency Special Needs Self-Identification Form | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Emergency Special Needs Self-Identification Form DOE Emergency Special Needs Self-Identification Form Emergency Special Needs Self-Identification Form DOE Emergency Special Needs...

Note: This page contains sample records for the topic "form eia-860m year" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Atomization methods for forming magnet powders  

SciTech Connect

The invention encompasses methods of utilizing atomization, methods for forming magnet powders, methods for forming magnets, and methods for forming bonded magnets. The invention further encompasses methods for simulating atomization conditions. In one aspect, the invention includes an atomization method for forming a magnet powder comprising: a) forming a melt comprising R.sub.2.1 Q.sub.13.9 B.sub.1, Z and X, wherein R is a rare earth element; X is an element selected from the group consisting of carbon, nitrogen, oxygen and mixtures thereof; Q is an element selected from the group consisting of Fe, Co and mixtures thereof; and Z is an element selected from the group consisting of Ti, Zr, Hf and mixtures thereof; b) atomizing the melt to form generally spherical alloy powder granules having an internal structure comprising at least one of a substantially amorphous phase or a substantially nanocrystalline phase; and c) heat treating the alloy powder to increase an energy product of the alloy powder; after the heat treatment, the alloy powder comprising an energy product of at least 10 MGOe. In another aspect, the invention includes a magnet comprising R, Q, B, Z and X, wherein R is a rare earth element; X is an element selected from the group consisting of carbon, nitrogen, oxygen and mixtures thereof; Q is an element selected from the group consisting of Fe, Co and mixtures thereof; and Z is an element selected from the group consisting of Ti, Zr, Hf and mixtures thereof; the magnet comprising an internal structure comprising R.sub.2.1 Q.sub.13.9 B.sub.1.

Sellers, Charles H. (Idaho Falls, ID); Branagan, Daniel J. (Idaho Falls, ID); Hyde, Timothy A. (Idaho Falls, ID)

2000-01-01T23:59:59.000Z

482

Spray-formed tooling and aluminum strip  

SciTech Connect

Spray forming is an advanced materials processing technology that converts a bulk liquid metal to a near-net-shape solid by depositing atomized droplets onto a suitably shaped substrate. By combining rapid solidification processing with product shape control, spray forming can reduce manufacturing costs while improving product quality. De Laval nozzles offer an alternative method to the more conventional spray nozzle designs. Two applications are described: high-volume production of aluminum alloy strip, and the production of specialized tooling, such as injection molds and dies, for rapid prototyping.

McHugh, K.M.

1995-11-01T23:59:59.000Z

483

High temperature methods for forming oxidizer fuel  

DOE Patents (OSTI)

A method of treating a formation fluid includes providing formation fluid from a subsurface in situ heat treatment process. The formation fluid is separated to produce a liquid stream and a first gas stream. The first gas stream includes carbon dioxide, hydrogen sulfide, hydrocarbons, hydrogen or mixtures thereof. Molecular oxygen is separated from air to form a molecular oxygen stream comprising molecular oxygen. The first gas stream is combined with the molecular oxygen stream to form a combined stream comprising molecular oxygen and the first gas stream. The combined stream is provided to one or more downhole burners.

Bravo, Jose Luis (Houston, TX)

2011-01-11T23:59:59.000Z

484

Chemistry 199 -Online Safety Self-Certification Find the "e-form" at: http://chemistry.ucsd.edu/chemistryweb/internal/Student/SafetyForm  

E-Print Network (OSTI)

Chemistry 199 - Online Safety Self-Certification Find the "e-form" at: http class - required of anyone doing research - provide PI your "certificate" ) Annual "on-line" EHS hazardous materials training ( everyone must do this once per calendar year, provide PI your "certificate

Gleeson, Joseph G.

485

Directory of energy data collection forms: Forms in use as of October 1994  

SciTech Connect

This 18th edition directory provides an overview of DOE`s energy information collection programs for decisionmakers in Government and industry; selected public use forms currently used as basic energy information gathering tools by DOE are covered. For each form, an abstract is included that describes the form`s uses, its respondents, and the data collected. Also shown are frequently requested items: energy sources and functions covered by the form, general categories of respondents, collection frequency, public laws and regulations, reporting requirement, name and phone number of the data collection manager, and the publications resulting from the data collection. Indexes, arranged according to energy source/function, publications, respondent categories, former EIA form number designations, and collection authorities, are provided.

Not Available

1994-12-15T23:59:59.000Z

486

Plate forming and break down pizza box  

SciTech Connect

A standard corrugated paper pizza box is provided with slit cuts cut through the top panel of the pizza box in a shape to form four circular serving plates with a beveled raised edge and cross slit cuts through the bottom panel of the pizza box separating the box into four essentially equal portions for easy disposal.

Pantisano, Frank (411 Linda Ave., Blackwood, NJ 08012); Devine, Scott M. (B7 Fairways Apartments, Blackwood, NJ 08012)

1992-01-01T23:59:59.000Z

487

COMMISSION REPORT FORMS AND INSTRUCTIONS FOR  

E-Print Network (OSTI)

explain the units reported (for example, number of customers or number of accounts), and whether Division. Publication number: CEC-200-2010-007-CMF. iii #12;TABLE OF CONTENTS ABSTRACT ................................................7 Form 1.3 Peak Demand by Sector (Bundled Customers

488

MEDICAL/ DENTAL/ VISION ENROLLMENT / CHANGE FORM  

E-Print Network (OSTI)

MEDICAL/ DENTAL/ VISION ENROLLMENT / CHANGE FORM Changes are effective the 1st of the next month UNM Medical Plan Third Party Administrator Election Dental Plan Election Vision Plan Election Lovelace: (Add or Remove) Mark Type of Coverage for each Enrollee Spouse Add Remove Medical Dental Vision

New Mexico, University of

489

Texas Union Pizza Order Form ROOM RESERVED ______________________________________________________  

E-Print Network (OSTI)

#12;#12;Texas Union Pizza Order Form ROOM RESERVED: ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ Pick-up All orders are to be picked up at the Texas Union Hospitality Center desk in the south end West with the Texas Union Policies and Procedures. I understand that I will be held responsible for any debts incurred

Texas at Austin, University of

490

4-H Club Officer Handbook - Forms  

E-Print Network (OSTI)

This section from the 4-H Club Officer Handbook contains key forms that various clubs leader rely on to help them carry out their duties. Included are sample checks and deposit slips to help make practice perfect for the Treasurer. Taking minutes and keeping track of attendance are tasks made more simple with a sample roster, agenda worksheet and contact sheet.

Howard, Jeff W.

2006-08-09T23:59:59.000Z

491

Methods for forming wellbores in heated formations  

DOE Patents (OSTI)

A method for forming a wellbore in a heated formation includes flowing liquid cooling fluid to a bottom hole assembly in a wellbore in a heated formation. At least a portion of the liquid cooling fluid is vaporized at or near a region to be cooled. Vaporizing the liquid cooling fluid absorbs heat from the region to be cooled.

Guimerans, Rosalvina Ramona; Mansure, Arthur James

2012-09-25T23:59:59.000Z

492

Technetium Waste Form Development Progress Report  

SciTech Connect

The approach being followed to evaluate the use of an iron-based alloy waste form to immobilize the Tc-bearing waste streams generated during the aqueous and electrochemical processing of used fuel that is being studied in the DOE Advanced Fuel Cycle Initiative (AFCI) is presented in this report. The objective is to develop an alloy waste form that provides high waste loading within waste form processing limitations, meets waste form performance requirements for durability and the long-term retention of radionuclides, and can be produced with consistent physical, chemical, and radiological properties that meet regulatory acceptance requirements for disposal. Microanalysis using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) was used to analyze non-radioactive Fe-Mo-Re samples. A sample was prepared for SEM; however, significant unforeseen instrument problems led to delays in conducting the detailed work. The TEM was not available for this particular sample and therefore only preliminary SEM work can be reported. The results are in agreement with previous studies [Ebert 2009]; however, a rhenium-rich region within the Re-Mo phase is clearly visible.

Buck, Edgar C.

2010-02-26T23:59:59.000Z

493

Spray Forming Aluminum - Final Report (Phase II)  

SciTech Connect

The U.S. Department of Energy - Office of Industrial Technology (DOE) has an objective to increase energy efficient and enhance competitiveness of American metals industries. To support this objective, ALCOA Inc. entered into a cooperative program to develop spray forming technology for aluminum. This Phase II of the DOE Spray Forming Program would translate bench scale spray forming technology into a cost effective world class process for commercialization. Developments under DOE Cooperative Agreement No. DE-FC07-94ID13238 occurred during two time periods due to budgetary constraints; April 1994 through September 1996 and October 1997 and December 1998. During these periods, ALCOA Inc developed a linear spray forming nozzle and specific support processes capable of scale-up for commercial production of aluminum sheet alloy products. Emphasis was given to alloys 3003 and 6111, both being commercially significant alloys used in the automotive industry. The report reviews research performed in the following areas: Nozzel Development, Fabrication, Deposition, Metal Characterization, Computer Simulation and Economics. With the formation of a Holding Company, all intellectual property developed in Phases I and II of the Project have been documented under separate cover for licensing to domestic producers.

D. D. Leon

1999-07-08T23:59:59.000Z

494

Forming foam structures with carbon foam substrates  

Science Conference Proceedings (OSTI)

The invention provides foams of desired cell sizes formed from metal or ceramic materials that coat the surfaces of carbon foams which are subsequently removed. For example, metal is located over a sol-gel foam monolith. The metal is melted to produce a metal/sol-gel composition. The sol-gel foam monolith is removed, leaving a metal foam.

Landingham, Richard L.; Satcher, Jr., Joe H.; Coronado, Paul R.; Baumann, Theodore F.

2012-11-06T23:59:59.000Z

495

COMMISSION REPORT FORMS AND INSTRUCTIONS FOR  

E-Print Network (OSTI)

Director #12;ABSTRACT These electric transmission forms ask utility owners of bulk electric transmission on their projects. Electric transmission system owners in California have until March 18, 2011 to submit their data: Electric transmission, bulk electric transmission system facilities, transmission corridor, data request

496

BRAZIL VISITING FELLOWSHIP SCHEME Application Form  

E-Print Network (OSTI)

BRAZIL VISITING FELLOWSHIP SCHEME Application Form APPLICATIONS SHOULD BE TYPEWRITTEN AND BOXES of attendance Qualifications awarded and class of Honours, etc. Principal Subject(s) taken #12;BRAZIL VISITING): Date(s) From To To Nature of work and Position held Name and address of employer #12;BRAZIL VISITING

Birmingham, University of

497

Page 1 of 1 Author Query Form  

E-Print Network (OSTI)

of uranium by aerosols. 237 Heavy Element Colloids in Nevada Test Site 238 Migration of plutonium and other also been 315 proposed as a waste form for immobilization of plutonium 316 from dismantled nuclear properties of plutonium in natural 566 waters. Environ. Sci. Technol. 1985, 19 (2), 127­ 567 131. 568 28. Kim

Utsunomiya, Satoshi

498

LAND USE, COVER AND FORMS CLASSIFICATION SYSTEM  

E-Print Network (OSTI)

upon request other state agencies in their mapping activities. Although our primary responsibility. 1 #12;2 A committee representing eight state agencies was formed in 1973 to improve land resources data coordination within the various state agencies by reducing duplication of effort and increasing

Binford, Michael W.

499

Active superconducting devices formed of thin films  

DOE Patents (OSTI)

Active superconducting devices are formed of thin films of superconductor which include a main conduction channel which has an active weak link region. The weak link region is composed of an array of links of thin film superconductor spaced from one another by voids and selected in size and thickness such that magnetic flux can propagate across the weak link region when it is superconducting. Magnetic flux applied to the weak link region will propagate across the array of links causing localized loss of superconductivity in the links and changing the effective resistance across the links. The magnetic flux can be applied from a control line formed of a superconducting film deposited coplanar with the main conduction channel and weak link region on a substrate. The devices can be formed of any type to superconductor but are particularly well suited to the high temperature superconductors since the devices can be entirely formed from coplanar films with no overlying regions. The devices can be utilized for a variety of electrical components, including switching circuits, amplifiers, oscillators and modulators, and are well suited to microwave frequency applications.

Martens, Jon S. (Madison, WI); Beyer, James B. (Madison, WI); Nordman, James E. (Madison, WI); Hohenwarter, Gert K. G. (Madison, WI)

1991-05-28T23:59:59.000Z

500

Manifold free multiple sheet superplastic forming  

DOE Patents (OSTI)

Fluid-forming compositions in a container attached to enclosed adjacent sheets are heated to relatively high temperatures to generate fluids (gases) that effect inflation of the sheets. Fluid rates to the enclosed space between the sheets can be regulated by the canal from the container. Inflated articles can be produced by a continuous, rather than batch-type, process.

Elmer, John W. (Danville, CA); Bridges, Robert L. (Knoxville, TN)

2001-01-01T23:59:59.000Z