Sample records for form eia-20 mandatory

  1. MANDATORY MEASURES DAYLIGHTING

    E-Print Network [OSTI]

    California at Davis, University of

    MANDATORY MEASURES DAYLIGHTING Reference: Sub-Chapter 4, Section 130.1(d) #12;SECTION 4 Daylighting daylighting controls. · Lighting in daylit zones should have multi-level steps, per Table 130.1-A · Light levels provided at night should be available at all other times · When sufficient daylight is available

  2. MANDATORY MEASURES DAYLIGHTING

    E-Print Network [OSTI]

    California at Davis, University of

    MANDATORY MEASURES DAYLIGHTING Reference: Sub-Chapter 4, Section 130.1(d) #12;SECTION 4 MINIMUM DAYLIGHTING FOR LARGE SPACES Large enclosed spaces, such as large retail warehouses, are required to have a minimum amount of daylight available when using the prescriptive method of compliance. The minimum

  3. MANDATORY MEASURES DAYLIGHTING

    E-Print Network [OSTI]

    California at Davis, University of

    MANDATORY MEASURES DAYLIGHTING Reference: Sub-Chapter 4, Section 130.1(d) #12;SECTION 5 Daylighting daylighting controls. · Lighting in daylit zones should have multi-level steps, per Table 130.1-A · Light levels provided at night should be available at all other times · When sufficient daylight is available

  4. Mandatory Shoreland Zoning Act (Maine)

    Broader source: Energy.gov [DOE]

    The Mandatory Shoreline Zoning Act functions as a directive for municipalities, who are required to adopt, administer, and enforce local ordinances that regulate land use activities in the...

  5. MANDATORY MEASURES INDOOR LIGHTING CONTROLS

    E-Print Network [OSTI]

    California at Davis, University of

    MANDATORY MEASURES INDOOR LIGHTING CONTROLS (Reference: Sub-Chapter 4, Section 130.1) #12;SECTION 4 MANDATORY LIGHTING CONTROLS 1. 130.1 (a) Area Controls: Manual controls that control lighting in each area separately 2. 130.1 (b) Multi-level Controls: Allow occupants to choose the appropriate light level for each

  6. MANDATORY MEASURES INDOOR LIGHTING CONTROLS

    E-Print Network [OSTI]

    California at Davis, University of

    MANDATORY MEASURES INDOOR LIGHTING CONTROLS (Reference: Sub-Chapter 4, Section 130.1) #12;SECTION 3 MANDATORY LIGHTING CONTROLS 1. 130.1 (a) Area Controls: Manual controls that control lighting in each area separately 2. 130.1 (b) Multi-level Controls: "Dimmability." Allow occupants to choose the appropriate light

  7. MANDATORY MEASURES INDOOR LIGHTING CONTROLS

    E-Print Network [OSTI]

    California at Davis, University of

    MANDATORY MEASURES INDOOR LIGHTING CONTROLS (Reference: Sub-Chapter 4, Section 130.1) #12;SECTION 5 MANDATORY LIGHTING CONTROLS 1. Area Controls: Manual controls that control lighting in each area separately 2. Multi-level Controls: Allow occupants to choose the appropriate light level for each area 3. Shut

  8. 2014 Veteran Employment and USERRA Mandatory Training

    Broader source: Energy.gov [DOE]

    Annual Mandatory Training for Managers, Supervisors and Human Resource Professionals on Veteran Employment and USERRA

  9. MANDATORY MEASURES OUTDOOR LIGHTING CONTROLS

    E-Print Network [OSTI]

    California at Davis, University of

    MANDATORY MEASURES OUTDOOR LIGHTING CONTROLS (Reference: Sub-Chapter 4, Section 130.2) #12;SECTION level of each multi-tier garage. · General lighting must have occupant sensing controls with at least one control step between 20% and 50% of design lighting power · No more than 500 watts of rated

  10. MANDATORY MEASURES OUTDOOR LIGHTING CONTROLS

    E-Print Network [OSTI]

    California at Davis, University of

    MANDATORY MEASURES OUTDOOR LIGHTING CONTROLS (Reference: Sub-Chapter 4, Section 130.2) #12;SECTION 5 Additions and Alterations Any alteration that increases the connected lighting load must meet all No measures required OUTDOOR LIGHTING11/20/2014 #12;SECTION 5 BACKLIGHT, UPLIGHT, AND GLARE (BUG) RATINGS

  11. MANDATORY MEASURES OUTDOOR LIGHTING CONTROLS

    E-Print Network [OSTI]

    California at Davis, University of

    MANDATORY MEASURES OUTDOOR LIGHTING CONTROLS (Reference: Sub-Chapter 4, Section 130.2) #12;SECTION performance in relation to lighting trespass, sky glow, and high angle brightness. This is necessary in order to reduce light pollution, which has a negative effect on wildlife and the surrounding environments

  12. Mandatory Training | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector General Office0-72.pdfGeorgeDoesn't HappenLow-Cost ProductionManagementSites | DepartmentMandatory

  13. Mandatory Student Fees FY 2014 2015

    E-Print Network [OSTI]

    Maccabe, Barney

    Mandatory Student Fees FY 2014 ­ 2015 Mandatory Student Fees, as prescribed in UNM Policy 1310 to assess. The Board of Regents approves the final amount. Below is the annual budget detailing how these fees will be allocated. April 21, 2014 Budget (in dollars) STUDENT ACTIVITY FEES (assessed to all

  14. STATE OF CALIFORNIA MANDATORY MEASURES SUMMARY: RESIDENTIAL

    E-Print Network [OSTI]

    System Measures: §110-§113: HVAC equipment, water heaters, showerheads, faucets and all other regulated): Mandatory Vapor barrier installed in Climate Zones 14 or 16. §150(l): Water absorption rate for slab edge insulation material alone without facings is no greater than 0.3%; water vapor permeance rate is no greater

  15. The iPhone Goes Downstream: Mandatory Universal Distribution?

    E-Print Network [OSTI]

    Karp, Larry; Perloff, Jeffrey

    2011-01-01T23:59:59.000Z

    Paper 1125 The iPhone Goes Downstream: mandatory universalauthor(s). The iPhone Goes Downstream: Mandatory UniversaliPhones using a single downstream vendor prompted calls for

  16. The iPhone Goes Downstream: Mandatory Universal Distribution

    E-Print Network [OSTI]

    Karp, Larry S.

    The iPhone Goes Downstream: Mandatory Universal Distribution Larry S. Karp Jeffrey M. Perloff December 2011 Abstract Apple's original decision to market iPhones using a single downstream vendor prompted calls for mandatory universal distribution (MUD), whereby all downstream vendors would sell the i

  17. Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsing ZirconiaPolicyFeasibilityFieldMinds" Give Forms (All forms are in .pdf

  18. The iPhone Goes Downstream: Mandatory Universal Distribution

    E-Print Network [OSTI]

    Silver, Whendee

    The iPhone Goes Downstream: Mandatory Universal Distribution Larry S. Karp Jeffrey M. Perloff February 2010 Abstract Apple's decision to market iPhones using a single downstream vendor has prompted vendors. We show that an upstream monopoly might want to use one or more downstream vendors, and society

  19. Maximum Entry and Mandatory Separation Ages for Certain Security Employees

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-10-11T23:59:59.000Z

    The policy establishes the DOE policy on maximum entry and mandatory separation ages for primary or secondary positions covered under special statutory retirement provisions and for those employees whose primary duties are the protection of officials of the United States against threats to personal safety or the investigation, apprehension, and detention of individuals suspected or convicted of offenses against the criminal laws of the United States. Admin Chg 1, dated 12-1-11, cancels DOE P 310.1.

  20. ELECTRONIC BILLING EXEMPTION APPEAL Return this form

    E-Print Network [OSTI]

    Amin, S. Massoud

    ELECTRONIC BILLING EXEMPTION APPEAL Return this form In person on campus: 333 Science Teaching or black ink. DIRECTIONS To be considered for an exemption from an electronic billing, which is mandatory to be exempt from electronic billing. If you circumstances are similar to the following examples, you may

  1. Part 1 Identify yourself (mandatory) Student Number: _______________________Queen's Email: ________________________________________

    E-Print Network [OSTI]

    Ellis, Randy

    First Name Initial Part 2 ­ Setup Pre-Authorized Payment Plan (PPL) · This method of Payment: ________________________________________________________ Pre-Authorized Payment Plan (PPL) (SGS Students Only) The personal information on this form

  2. Creating and Implementing a Regularized Monitoring and Enforcement System for China's Mandatory Standards and Energy Information Label for Appliances

    E-Print Network [OSTI]

    Lin, Jiang

    2008-01-01T23:59:59.000Z

    best practices, Chinas monitoring and enforcement effort of mandatory energy efficiencybest practices, however, Chinas monitoring and enforcement effort for its mandatory energy efficiencyBest Practice Based on the review of existing laws and regulations related to energy efficiency

  3. MANDATORY PRINTING CONTRACTS Division of Enterprise Operations, State Bureau of Procurement

    E-Print Network [OSTI]

    Sheridan, Jennifer

    @amerlitho.com W: American Litho Shari Beder T: (414) 342-5050 F: (414) 342-9950 Lot 3D Inks: 3 & up, Covers upMANDATORY PRINTING CONTRACTS Division of Enterprise Operations, State Bureau of Procurement Print or longer Envelopes (quantities 500-5,000), Printing Commercial & Catalog Envelopes Quantities: Commercial

  4. Non-Mandatory Appendix A to 1910.900: Ergonomics Program Elements Note: The elements of an ergonomics program contained here are consistent with and

    E-Print Network [OSTI]

    Choobineh, Fred

    A - 1 Non-Mandatory Appendix A to §1910.900: Ergonomics Program Elements Note: The elements of an ergonomics program contained here are consistent with and somewhat redundant of those contained that is not in the mandatory part of the standard is not mandatory. Elements of a complete ergonomics program. A full

  5. Export of Canadian Meteorites Reporting of a meteorite found in Canada is not mandatory. Meteorites found in Canada can be

    E-Print Network [OSTI]

    Machel, Hans

    Export of Canadian Meteorites Reporting of a meteorite found in Canada is not mandatory. Meteorites found in Canada can be sold in Canada. The export Under the Cultural Property Export and Import Act (S a permit from the Canada Customs and Revenue Agency (CCRA), and application for a permit must be made

  6. NIH APPLICATIONS, PROPOSALS, AND PROGRESS REPORTS Reminder the NIH Public Access Policy (http://publicaccess.nih.gov/) is now mandatory.

    E-Print Network [OSTI]

    Kim, Duck O.

    NIH APPLICATIONS, PROPOSALS, AND PROGRESS REPORTS Reminder the NIH Public Access Policy (http://publicaccess.nih.gov/) is now mandatory. As of May 25, 2008, NIH applications, proposals, and progress reports must include-authored by the investigator, or arose from the investigator's NIH award. This policy includes applications submitted

  7. The Effects of Mandatory Country-of-Origin Labeling on Canadian/U.S. Live Hog and Feeder Pig Trade

    E-Print Network [OSTI]

    Thevenaz, Shad Arthur Michel

    2012-02-14T23:59:59.000Z

    of Origin Labeling Law reduced the trade of live hogs between the United States and Canada by 37.8 percent, with the trade of feeder pigs reduced by 24.1 percent. It also has been found that the implementation of the Mandatory Country of Origin Labeling... 1 CHAPTER I INTRODUCTION AND JUSTIFICATION The Canadian and U.S. swine industries have evolved over the last few decades into an integrated system. In the late 1980s and early 1990s Canada and the United States solidified trade relationships...

  8. Leveraging IPsec for Mandatory Per-Packet Access Control Trent Jaeger David H. King Kevin R. Butler Serge Hallyn Joy Latten Xiaolan Zhang

    E-Print Network [OSTI]

    Yener, Aylin

    - tionality enables machines to control communication with processes on other machines based on the security Mandatory access control (MAC) enforcement has ar- rived for commercial operating systems, such as Linux 2 of objects, but control of network communication has been primitive to date. The SELinux system controls

  9. 2014-2015 Space Allocations As a reminder--there will be a Mandatory Space Allocations meeting 4/28/14 (Monday) at

    E-Print Network [OSTI]

    Arnold, Jonathan

    2014-2015 Space Allocations As a reminder--there will be a Mandatory Space Allocations meeting 4/28/14 (Monday) at 6:15pm. The meeting will be held at the front tables in the CSO Space--102U. The meeting IN LOSS OF SPACE (NO EXCEPTIONS)!!! Cubicle Active Minds American Medical Student Association Athens

  10. Non-Mandatory Appendix C to 1910.900: Physical Work Activities and Conditions and the Ergonomic Risk Factors that may be Present.

    E-Print Network [OSTI]

    Choobineh, Fred

    Non-Mandatory Appendix C to §1910.900: Physical Work Activities and Conditions and the Ergonomic Risk Factors that may be Present. PHYSICAL WORK ACTIVITIES AND CONDITIONS ERGONOMIC RISK FACTORS ACTIVITIES AND CONDITIONS ERGONOMIC RISK FACTORS THAT MAY BE PRESENT (10) Workstation edges or objects press

  11. Non-Mandatory Appendix E to 1910. 900: Summary of the MSD/Ergonomics Program The purpose of this standard to reduce musculoskeletal disorders (MSDs) developed by workers

    E-Print Network [OSTI]

    Choobineh, Fred

    1 Non-Mandatory Appendix E to §1910. 900: Summary of the MSD/Ergonomics Program Standard Purpose involve tasks that lead to MSDs. The principle behind ergonomics is that by fitting the job to the worker employees. If an adequate quick fix is implemented, an MSD/Ergonomics program need not be implemented. Job

  12. Form Approval:

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781 2,328 2,683DieselValues shown for the current8610) Form Approval:

  13. Form Approved

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781 2,328 2,683DieselValues shown for the current8610) FormApproved

  14. Service Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassiveSubmitted forHighlightsSeminars Seminars at theSequestration ofService Forms

  15. Creating and Implementing a Regularized Monitoring and EnforcementSystem for China's Mandatory Standards and Energy Information Label forAppliances

    SciTech Connect (OSTI)

    Lin, Jiang

    2007-03-01T23:59:59.000Z

    China has developed a comprehensive program of energy efficiency standards and labels for household appliances. In 1989, China first launched its minimum energy performance standards (MEPS), which are now applied to an extensive list of products. In 1998, China launched a voluntary energy endorsement label, which has grown to cover both energy-saving and water-saving products. And, in 2005, China launched a mandatory energy information label that initially covered two products. CLASP has assisted China in developing 11 minimum energy performance standards (MEPS) for 9 products and endorsement labels for 11 products including: refrigerators; air conditioners; televisions; printers; computers; monitors; fax machines; copiers; DVD/VCD players; external power supplies; and set-top boxes. CLASP has also assisted China in the development of the mandatory energy information label. Increasingly, attention is being placed on maximum energy savings from China's standards and labeling (S&L) efforts in order to meet the recently announced goal of reducing China's energy intensity by 20 percent by 2010 with an interim objective of 4 percent in 2006. China's mandatory standards system is heavily focused on the technical requirements for efficiency performance, but historically, it has lacked administrative and personnel capacity to undertake monitoring and enforcement of these legally binding standards. Similarly, resources for monitoring and enforcement have been quite limited. As a consequence, compliance to both the mandatory standards and the mandatory energy information label is uneven with the potential and likely result of lost energy savings. Thus, a major area for improvement, which could significantly increase overall energy savings, is the creation and implementation of a regularized monitoring system for tracking the compliance to, and enforcement of, mandatory standards and the energy information label in China. CLASP has been working with the China National Institute of Standardization (CNIS), the China Administration for Quality, Supervision, Inspection and Quarantine (AQSIQ) and relevant stakeholders in the industry to develop a stronger system of monitoring and enforcement. In November 2005, CNIS and LBNL (a CLASP implementing partner) with funding from the Energy Foundation jointly organized an international workshop to present the international best practices in S&L monitoring and enforcement. Currently, CNIS is developing a guideline for monitoring and enforcement for appliance standards. With support from METI, CLASP has been able to expand the on-going collaboration with CNIS to include enforcement needs for the mandatory energy information label and to accelerate the progress of the project to develop a more robust monitoring and enforcement for S&L programs in China. This expanded effort has included: (1) Holding an enforcement and monitoring roadmap planning workshop with key S&L stakeholders; (2) Interviews with S&L stakeholders on the need and scope of national compliance tests; (3) Research on past enforcement activities; (4) An analysis of compliance data from the mandatory energy information labeling program; (5) Interviews with stakeholders on the need and scope of testing infrastructure; and (6) Development of a roadmap for future activities. This report summarizes the findings of these activities and identifies the progress that China is making, and can make, toward developing a stronger system of monitoring and enforcement (M&E). In sum, it outlines a vision of moving forward with more vigorous M&E in China.

  16. 2013 2014 Mandatory Accident &

    E-Print Network [OSTI]

    Aronov, Boris

    by the health care reform law for the restrictions on annual dollar limits. The annual dollar limits ensure health insurance coverage, offered by Aetna Student Health*, may not meet the minimum standards required for annual dollar limits for group and individual health insurance coverage are $2 million for policy years

  17. * =mandatory field) Investigator:*

    E-Print Network [OSTI]

    averaged salinity during post-processing. Daily data was only available at time of CO2 QC. NOAA_Design: § Equilibrator_Type: (show pick list) Bubble Equilibrator § Equilibrator_Volume: (L) N/A § Water_Flow_Rate: (L/min) N/A § Headspace_Gas_Flow_Rate: (L/min) ~600 cc/min § Vented: (show pick list) Yes o Measurement

  18. * =mandatory field) Investigator:*

    E-Print Network [OSTI]

    conductivity data at 10 minute intervals and then computes hourly averaged salinity during post-processing_Description:* o Equilibrator_Design: § Equilibrator_Type: (show pick list) Bubble Equilibrator § Equilibrator_Volume: (L) N/A § Water_Flow_Rate: (L/min) N/A § Headspace_Gas_Flow_Rate: (L/min) ~600 cc/min § Vented: (show

  19. * =mandatory field) Investigator:*

    E-Print Network [OSTI]

    ) Bubble Equilibrator Equilibrator_Volume: (L) N/A Water_Flow_Rate: (L/min) N/A Headspace_Gas conductivity data at 10 minute intervals and then computes hourly averaged salinity during post-processing-dispersive infrared (NDIR) gas analyzer o Manufacturer_of_Calibration_Gas: NOAA Earth System Resear

  20. * =mandatory field) Investigator:*

    E-Print Network [OSTI]

    records conductivity data at 10 minute intervals and then computes hourly averaged salinity during post-processing_Type: (show pick list) Bubble Equilibrator Equilibrator_Volume: (L) N/A Water_Flow_Rate: (L/min) N/A Headspace_Gas_Flow_Rate: (L/min) ~600 cc/min Vented: (show pick list) Yes o Measurement_Method: Absolute

  1. * =mandatory field) Investigator:*

    E-Print Network [OSTI]

    ) Bubble Equilibrator Equilibrator_Volume: (L) N/A Water_Flow_Rate: (L/min) N/A Headspace_Gas records conductivity data at 10 minute intervals and then computes hourly averaged salinity during post-processing-dispersive infrared (NDIR) gas analyzer o Manufacturer_of_Calibration_Gas: NOAA Earth System

  2. * =mandatory field) Investigator:*

    E-Print Network [OSTI]

    ) Bubble Equilibrator Equilibrator_Volume: (L) N/A Water_Flow_Rate: (L/min) N/A Headspace_Gas conductivity data at 10 minute intervals and then computes hourly averaged salinity during post-processing-dispersive infrared (NDIR) gas analyzer o Manufacturer_of_Calibration_Gas: NOAA Earth System Research

  3. * =mandatory field) Investigator:*

    E-Print Network [OSTI]

    ) Bubble Equilibrator Equilibrator_Volume: (L) N/A Water_Flow_Rate: (L/min) N/A Headspace_Gas conductivity data at 10 minute intervals and then computes hourly averaged salinity during post-processing-dispersive infrared (NDIR) gas analyzer o Manufacturer_of_Calibration_Gas: NOAA Earth System Research L

  4. * =mandatory field) Investigator:*

    E-Print Network [OSTI]

    ) Bubble Equilibrator Equilibrator_Volume: (L) N/A Water_Flow_Rate: (L/min) N/A Headspace_Gas conductivity data at 10 minute intervals and then computes hourly averaged salinity during post-processing-dispersive infrared (NDIR) gas analyzer o Manufacturer_of_Calibration_Gas: NOAA Earth System Researc

  5. * =mandatory field) Investigator:*

    E-Print Network [OSTI]

    hourly averaged salinity during post-processing. The salinity reported during the equilibration period_Design: Equilibrator_Type: (show pick list) Bubble Equilibrator Equilibrator_Volume: (L) N/A Water_Flow_Rate: (L/min) N/A Headspace_Gas_Flow_Rate: (L/min) ~600 cc/min Vented: (show pick list) Yes o Measurement

  6. * =mandatory field) Investigator:*

    E-Print Network [OSTI]

    ) Bubble Equilibrator Equilibrator_Volume: (L) N/A Water_Flow_Rate: (L/min) N/A Headspace_Gas conductivity data at 10 minute intervals and then computes hourly averaged salinity during post-processing-dispersive infrared (NDIR) gas analyzer o Manufacturer_of_Calibration_Gas: NOAA Earth System Research Labo

  7. Construction cost impact analysis of the U.S. Department of Energy mandatory performance standards for new federal commercial and multi-family, high-rise residential buildings

    SciTech Connect (OSTI)

    Di Massa, F.V.; Hadley, D.L.; Halverson, M.A.

    1993-12-01T23:59:59.000Z

    In accordance with federal legislation, the U.S. Department of Energy (DOE) has conducted a project to demonstrate use of its Energy Conservation Voluntary Performance Standards for Commercial and Multi-Family High-Rise Residential Buildings; Mandatory for New Federal Buildings; Interim Rule (referred to in this report as DOE-1993). A key requisite of the legislation requires DOE to develop commercial building energy standards that are cost effective. During the demonstration project, DOE specifically addressed this issue by assessing the impacts of the standards on (1) construction costs, (2) builders (and especially small builders) of multi-family, high-rise buildings, and (3) the ability of low-to moderate-income persons to purchase or rent units in such buildings. This document reports on this project.

  8. Mandatory dedication of park and open space land: effectiveness of and attitudes toward this method of public land acquisition in Texas

    E-Print Network [OSTI]

    Ehman, Douglas Richard

    2012-06-07T23:59:59.000Z

    the orD. 'nance an" = cate 1 . gi; 1st icr. styucI; &1olin. Hcrwever r tile Ca'. if orn It l the p Cb ro, van Co r -. sts t: he c". Irlci 1. t. Lorl 5 ancl r I's tric f Oy!ri CO tne . 1 O LIWrne CS I t 1 r(l. Cr Wno H eek-nrI C cog!'. 1'Le uty..."r case involved the testing of an ordinance wh' ch had bee-! enacted by the City of Naperville which . ;equi ed mandatory dedication of land for both schools and public op! n space, or . i n 1) eu of land, ?t he contribut! on of money for the establi...

  9. Non-Mandatory Appendix F to 1910.900: Ergonomics Program Evaluation These measures can be for the entire facility, parts of a facility, or each job. The most

    E-Print Network [OSTI]

    Choobineh, Fred

    F - 1 Non-Mandatory Appendix F to §1910.900: Ergonomics Program Evaluation Criteria These measures ergonomics information XX XX A12. Number of employee hours devoted to the ergonomics program X X A13. Annual expenditures on the ergonomics program X X A14. Annual expenditures on the ergonomics controls X X A15. Number

  10. ABATEMENT REQUEST FORM \\ \\ Drayton\\ Data\\ Graduate Office\\ Forms\\ F. Assistantship Forms\\ F.4 Abatement Request Form

    E-Print Network [OSTI]

    Kasman, Alex

    ABATEMENT REQUEST FORM (GSO-F4) Rev. 13-14 \\ \\ Drayton\\ Data\\ Graduate Office\\ Forms\\ F. Assistantship Forms\\ F.4 Abatement Request Form 1. CWID Degree or Certificate Program Residency Status 2. Last): Requested Enrollment Hours for Term: Note: The Abatement award is subject to the availability of funds

  11. Time, energy & form

    E-Print Network [OSTI]

    McInnis, Martha Jane

    1982-01-01T23:59:59.000Z

    Physical manifestations of time occur in natural forms of all sizes. Architectural form serves as shelter while providing a built envelope of human life, simultaneously influencing and influenced by energetic activities ...

  12. Forms of matter and forms of radiation

    E-Print Network [OSTI]

    Maurice Kleman

    2011-04-08T23:59:59.000Z

    The theory of defects in ordered and ill-ordered media is a well-advanced part of condensed matter physics. Concepts developed in this field also occur in the study of spacetime singularities, namely: i)- the topological theory of quantized defects (Kibble's cosmic strings) and ii)- the Volterra process for continuous defects, used to classify the Poincar\\'e symmetry breakings. We reassess the classification of Minkowski spacetime defects in the same theoretical frame, starting from the conjecture that these defects fall into two classes, as on they relate to massive particles or to radiation. This we justify on the empirical evidence of the Hubble's expansion. We introduce timelike and null congruences of geodesics treated as ordered media, viz. 'm'-crystals of massive particles and 'r'-crystals of massless particles, with parallel 4-momenta in M^4. Classifying their defects (or 'forms') we find (i) 'm'- and 'r'- Volterra continuous line defects and (ii) quantized topologically stable 'r'-defects, these latter forms being of various dimensionalities. Besides these 'perfect' forms, there are 'imperfect' disclinations that bound misorientation walls in three dimensions. We also speculate on the possible relation of these forms with the large-scale structure of the Universe.

  13. Methods of forming steel

    DOE Patents [OSTI]

    Branagan, Daniel J. (Iona, ID); Burch, Joseph V. (Shelley, ID)

    2001-01-01T23:59:59.000Z

    In one aspect, the invention encompasses a method of forming a steel. A metallic glass is formed and at least a portion of the glass is converted to a crystalline steel material having a nanocrystalline scale grain size. In another aspect, the invention encompasses another method of forming a steel. A molten alloy is formed and cooled the alloy at a rate which forms a metallic glass. The metallic glass is devitrified to convert the glass to a crystalline steel material having a nanocrystalline scale grain size. In yet another aspect, the invention encompasses another method of forming a steel. A first metallic glass steel substrate is provided, and a molten alloy is formed over the first metallic glass steel substrate to heat and devitrify at least some of the underlying metallic glass of the substrate.

  14. Meson electromagnetic form factors

    E-Print Network [OSTI]

    Stanislav Dubnicka; Anna Z. Dubnickova

    2012-10-23T23:59:59.000Z

    The electromagnetic structure of the pseudoscalar meson nonet is completely described by the sophisticated Unitary&Analytic model, respecting all known theoretical properties of the corresponding form factors.

  15. Form:SampleForm | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublicIDAPowerPlantSitingConstruction.pdfNotify98.pdf JumpFlixMapFile Jump to: navigation,SampleForm Jump to:

  16. Method of forming nanodielectrics

    DOE Patents [OSTI]

    Tuncer, Enis [Knoxville, TN; Polyzos, Georgios [Oak Ridge, TN

    2014-01-07T23:59:59.000Z

    A method of making a nanoparticle filled dielectric material. The method includes mixing nanoparticle precursors with a polymer material and reacting the nanoparticle mixed with the polymer material to form nanoparticles dispersed within the polymer material to form a dielectric composite.

  17. POSITION MANAGEMENT ACTION FORM

    E-Print Network [OSTI]

    Eirinaki, Magdalini

    POSITION MANAGEMENT ACTION FORM Workforce Planning | 408-924-2250 classcomp@sjsu.edu SJSU Human FOR POSITION MANAGEMENT FORM Workforce Planning | 408-924-2250| classcomp@sjsu.edu SJSU Human Resources Revised contact your Workforce Planning Analyst. List the name of the position this position reports to

  18. Method for forming materials

    DOE Patents [OSTI]

    Tolle, Charles R. (Idaho Falls, ID); Clark, Denis E. (Idaho Falls, ID); Smartt, Herschel B. (Idaho Falls, ID); Miller, Karen S. (Idaho Falls, ID)

    2009-10-06T23:59:59.000Z

    A material-forming tool and a method for forming a material are described including a shank portion; a shoulder portion that releasably engages the shank portion; a pin that releasably engages the shoulder portion, wherein the pin defines a passageway; and a source of a material coupled in material flowing relation relative to the pin and wherein the material-forming tool is utilized in methodology that includes providing a first material; providing a second material, and placing the second material into contact with the first material; and locally plastically deforming the first material with the material-forming tool so as mix the first material and second material together to form a resulting material having characteristics different from the respective first and second materials.

  19. Mandatory Utility Green Power Option

    Broader source: Energy.gov [DOE]

    All electric utilities operating in Iowa, including those not rate-regulated by the Iowa Utilities Board (IUB), are required to offer green power options to their customers. These programs allow...

  20. Mandatory Utility Green Power Option

    Broader source: Energy.gov [DOE]

    Legislation enacted in 2009 directed the Maine Public Utilities Commission (PUC) to develop a program offering green power as an option to residential and small commercial customers in the state....

  1. Mandatory Utility Green Power Option

    Broader source: Energy.gov [DOE]

    In May 2001, Washington enacted legislation (EHB 2247) that requires all electric utilities serving more than 25,000 customers to offer customers the option of purchasing renewable energy. Eligible...

  2. Mandatory Utility Green Power Option

    Broader source: Energy.gov [DOE]

    In Montana, regulated electric utilities are required to offer customers the option of purchasing electricity generated by certified, environmentally-preferred resources that include, but are not...

  3. Mandatory Utility Green Power Option

    Broader source: Energy.gov [DOE]

    In addition to meeting the requirements of the state [http://www.dsireusa.org/library/includes/incentive2.cfm?Incentive_Code=N... renewables portfolio standard], New Mexico investor-owned utilities...

  4. Mandatory Photovoltaic System Cost Estimate

    Broader source: Energy.gov [DOE]

    At the request of a customer or a potential customer, Colorado electric utilities are required to conduct a cost comparison of a photovoltaic (PV) system to any proposed distribution line extension...

  5. Mandatory Photovoltaic System Cost Analysis

    Broader source: Energy.gov [DOE]

    The Arizona Corporation Commission requires electric utilities to conduct a cost/benefit analysis to compare the cost of line extension with the cost of installing a stand-alone photovoltaic (PV)...

  6. Mandatory Renewable Energy Educational Materials

    Broader source: Energy.gov [DOE]

    If an electric utility must construct a line extension for a customer, and the utility requires the customer to pay a Contribution in Aid to Construction (CIAC) or a pre-payment charge, or to sign...

  7. Forms | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy UsageAUDITVehicles »Exchange Visitors ProgramEnergy FallFastForms Forms DOE Forms

  8. Introduction to differential forms

    E-Print Network [OSTI]

    2015-03-08T23:59:59.000Z

    section 8) if it has a potential energy function. In terms of differential forms, F is conservative precisely when F1dx + F2dy is exact. 3 Parametric curves.

  9. Forms | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy UsageAUDITVehicles »Exchange Visitors ProgramEnergy FallFastForms Forms DOE

  10. The FORM project

    E-Print Network [OSTI]

    J. A. M. Vermaseren

    2008-06-25T23:59:59.000Z

    The necessity of the FORM project is discussed. Then the evolutionary needs in particle physics are considered, looking at the trends over the years. A guess is made at what will be needed in the (near) future. The whole is concluded with some critical remarks concerning the publication of results and programs.

  11. DEVELOPMENT QUALIFICATION AND DISPOSAL OF AN ALTERNATIVE IMMOBILIZED LOW-ACTIVITY WASTE FORM AT THE HANFORD SITE

    SciTech Connect (OSTI)

    SAMS TL; EDGE JA; SWANBERG DJ; ROBBINS RA

    2011-01-13T23:59:59.000Z

    Demonstrating that a waste form produced by a given immobilization process is chemically and physically durable as well as compliant with disposal facility acceptance criteria is critical to the success of a waste treatment program, and must be pursued in conjunction with the maturation of the waste processing technology. Testing of waste forms produced using differing scales of processing units and classes of feeds (simulants versus actual waste) is the crux of the waste form qualification process. Testing is typically focused on leachability of constituents of concern (COCs), as well as chemical and physical durability of the waste form. A principal challenge regarding testing immobilized low-activity waste (ILAW) forms is the absence of a standard test suite or set of mandatory parameters against which waste forms may be tested, compared, and qualified for acceptance in existing and proposed nuclear waste disposal sites at Hanford and across the Department of Energy (DOE) complex. A coherent and widely applicable compliance strategy to support characterization and disposal of new waste forms is essential to enhance and accelerate the remediation of DOE tank waste. This paper provides a background summary of important entities, regulations, and considerations for nuclear waste form qualification and disposal. Against this backdrop, this paper describes a strategy for meeting and demonstrating compliance with disposal requirements emphasizing the River Protection Project (RPP) Integrated Disposal Facility (IDF) at the Hanford Site and the fluidized bed steam reforming (FBSR) mineralized low-activity waste (LAW) product stream.

  12. Certification reporting forms

    SciTech Connect (OSTI)

    Not Available

    1981-02-18T23:59:59.000Z

    The required information and formats for the certification report including the cover sheet, compliance statement, and body of the report are given in this document. The body of the reports is different for each product. There are no product-to-product differences in the forms of the other parts of the reports. The products covered in this document include: furnaces, water heaters, refrigerator-freezers, central air conditioners, room air conditioners, and freezers.

  13. ARM - VAP Suggestion Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc Documentation RUCProductstwrmr DocumentationProductsaodsasheniraod DocumentationSuggestion Form

  14. WI DOCUMENT RELEASE FORM

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism inS-4500IIVasudhaSurface.Laboratory in Golden,WI DOCUMENT RELEASE FORM

  15. Technology Transfer Reporting Form

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage »of Energy StrainClientDesignOffice - 201420122 DOEServicesThis form is to

  16. ARM - Ingest Readiness Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcal Documentation(AVIRIS) ProductsAirborneOctober 11, 2011 [FacilityIndiaGVAXAssociated Status ReportsFormsIngest

  17. FORM EIA-28

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781 2,328 2,683DieselValues shown for the current twoForm78961

  18. Form EIA-767

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781 2,328 2,683DieselValues shown for the current8610)FormG (2001) --

  19. Form EIA-851Q

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781 2,328 2,683DieselValues shown for the current8610)FormG (2001)

  20. Form EIA-851Q

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781 2,328 2,683DieselValues shown for the current8610)FormG

  1. Form EIA-871A

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781 2,328 2,683DieselValues shown for the current8610)FormG0MApproval

  2. Fermilab Today - Subscription Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series toESnet4:Epitaxial ThinFORFALLSubscription Form Subscribe | Contact Us |

  3. Forms | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickr Flickr Editor's note: SincePlant Name: (MM))Publications byForms

  4. Bipolar pulse forming line

    DOE Patents [OSTI]

    Rhodes, Mark A. (Pleasanton, CA)

    2008-10-21T23:59:59.000Z

    A bipolar pulse forming transmission line module for linear induction accelerators having first, second, third, fourth, and fifth planar conductors which form an interleaved stack with dielectric layers between the conductors. Each conductor has a first end, and a second end adjacent an acceleration axis. The first and second planar conductors are connected to each other at the second ends, the fourth and fifth planar conductors are connected to each other at the second ends, and the first and fifth planar conductors are connected to each other at the first ends via a shorting plate adjacent the first ends. The third planar conductor is electrically connectable to a high voltage source, and an internal switch functions to short a high voltage from the first end of the third planar conductor to the first end of the fourth planar conductor to produce a bipolar pulse at the acceleration axis with a zero net time integral. Improved access to the switch is enabled by an aperture through the shorting plate and the proximity of the aperture to the switch.

  5. Radiation Safety Work Control Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Radiation Safety Work Control Form (see instructions on pg-3) Rev. May 2014 Area: Form : Date: Preliminary Applicability Screen: (a) Will closing the beam line injection stoppers...

  6. BEREA COLLEGE VENDOR QUALIFICATION FORM

    E-Print Network [OSTI]

    Baltisberger, Jay H.

    BEREA COLLEGE VENDOR QUALIFICATION FORM 1. Name of Company submit the most recent financial statements with this vendor qualification form. 17. If you accept

  7. Nucleon Electromagnetic Form Factors

    SciTech Connect (OSTI)

    Marc Vanderhaeghen; Charles Perdrisat; Vina Punjabi

    2007-10-01T23:59:59.000Z

    There has been much activity in the measurement of the elastic electromagnetic proton and neutron form factors in the last decade, and the quality of the data has greatly improved by performing double polarization experiments, in comparison with previous unpolarized data. Here we review the experimental data base in view of the new results for the proton, and neutron, obtained at JLab, MAMI, and MIT-Bates. The rapid evolution of phenomenological models triggered by these high-precision experiments will be discussed, including the recent progress in the determination of the valence quark generalized parton distributions of the nucleon, as well as the steady rate of improvements made in the lattice QCD calculations.

  8. STEP Utility Data Release Form

    Broader source: Energy.gov [DOE]

    STEP Utility Data Release Form, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  9. HEART Reimbursement Act Form Mail completed form to

    E-Print Network [OSTI]

    HEART Reimbursement Act Form Mail completed form to: Michigan State University MSU Human Resources Earnings Assistance and Relief (HEART) Act: If you are a member of a reserve component of the U.S. military

  10. Landscape and form : observation and transformation of farm form

    E-Print Network [OSTI]

    Henrich, Denise K. (Denise Kay)

    1988-01-01T23:59:59.000Z

    This thesis is an exploration of the collective, that of farm form. The form of a collective organization is of a multiplicity of relationships, rich in information and understandable. It is an interactive coming together ...

  11. FORMS AND INSTRUCTIONS FOR SUBMITTING

    E-Print Network [OSTI]

    CALIFORNIA ENERGY COMMISSION FORMS AND INSTRUCTIONS FOR SUBMITTING RETAIL ELECTRICITY PRICE DATA Manager David Ashuckian Manager ELECTRICITY ANALYSIS OFFICE Scott W. Matthews Deputy Director ELECTRICITY Instructions for Retail Price Forecasting Forms .......................................................9

  12. Project Approval Form Concentration in

    E-Print Network [OSTI]

    Goldberg, Bennett

    Project Approval Form Concentration in Nanotechnology Return completed form to ENG Undergraduate of Graduation:____________________________ Instructions: Please check one of the following ways in which you Plan to complete the project as a requirement for the concentration in Nanotechnology. Depending upon

  13. FAQs for Survey Forms 914

    Gasoline and Diesel Fuel Update (EIA)

    company for Form EIA-914? Please inform us as soon as possible of any change in the name, phone number, email address, etc., of the contact person of your company for Form EIA-914....

  14. Assessor Training NVLAP Assessment Forms

    E-Print Network [OSTI]

    NVLAP Assessor Training NVLAP Assessment Forms #12;Assessor Training 2009: NVLAP Assessment Forms 2 Summary ·Test Method Review Summary ·ProgramSpecific Checklists Examples #12;Assessor Training 2009: NVLAP are completed · Assessor Names, Dates, Lab Code #12;Assessor Training 2009: NVLAP Assessment Forms 4 NIST

  15. NORTHWESTERN UNIVERSITY ACCIDENT REPORT FORM

    E-Print Network [OSTI]

    Shahriar, Selim

    NORTHWESTERN UNIVERSITY ACCIDENT REPORT FORM Whenever a University vehicle sustains damage of any kind, or is involved in an accident which results in personal injury or property damage, this accident that this form is for University Use Only and is not meant to supersede the official state accident report form

  16. INTERNATIONAL STUDENT FINANCIAL DOCUMENTATION FORM

    E-Print Network [OSTI]

    Barrash, Warren

    INTERNATIONAL STUDENT FINANCIAL DOCUMENTATION FORM This form is not an application for financial assistance. This form is REQUIRED before we can provide immigration documents, even if your government, photocopied or faxed supporting financial documents. **List your name as it appears on your passport** Family

  17. INTERNATIONAL STUDENT FINANCIAL DOCUMENTATION FORM

    E-Print Network [OSTI]

    Barrash, Warren

    INTERNATIONAL STUDENT FINANCIAL DOCUMENTATION FORM Please complete this form if you this form and supporting financial documents after you have received your admissions decision. To receive will come from that source. Please attach supporting financial support documents that are less than six

  18. INTERNATIONAL STUDENT FINANCIAL DOCUMENTATION FORM

    E-Print Network [OSTI]

    Barrash, Warren

    INTERNATIONAL STUDENT FINANCIAL DOCUMENTATION FORM Please complete this form if you this form and supporting financial documents after you have received your admissions decision. To receive will come from that source. Please attach original supporting financial support documents, issued in English

  19. FormLink/FeynCalcFormLink : Embedding FORM in Mathematica and FeynCalc

    E-Print Network [OSTI]

    Feng Feng; Rolf Mertig

    2012-12-17T23:59:59.000Z

    FORM, a symbolic manipulation system, has been widely used in a lot of calculations for High Energy Physics due to its high performance and fficient design. Mathematica, another computational software program, has also widely been used, but more for reasons of generality and user-friendliness than for speed. Especially calculations involving tensors and noncommutative operations like calculating Dirac traces can be rather slow in Mathematica, compared to FORM. In this article we describe FormLink and FeynCalcFormLink, two Mathematica packages to link Mathematica and FeynCalc with FORM. FormLink can be used without FeynCalc and FeynCalcFormLink, which is an extension loading FormLink and FeynCalc automatically. With these two packages the impressive speed and other special features of FORM get embedded into the generality of Mathematica and FeynCalc in a simple manner. FeynCalcFormLink provides a FORM-based turbo for FeynCalc, making it much more efficient. FormLink turns Mathematica into an editor and code organizer for FORM.

  20. Seal for fluid forming tools

    DOE Patents [OSTI]

    Golovashchenko, Sergey Fedorovich (Beverly Hills, MI); Bonnen, John Joseph Francis (Milford, MI)

    2012-03-20T23:59:59.000Z

    An electro-hydraulic forming tool for forming a sheet metal blank in a one-sided die has first and second rigid rings that engage opposite sides of a sheet metal blank. The rigid rings are contained within slots on a die portion and a hydraulic force applicator portion of the forming tool. The seals are either resiliently biased by an elastomeric member or inherently resiliently biased into contact with the blank.

  1. YTL FOUNDATION -HWUM SCHOLARSHIP APPLICATION FORM Completed Application Form

    E-Print Network [OSTI]

    Painter, Kevin

    by these terms. I consent to the processing by the University of personal data (including sensitive personal data) Personal Statement Proof of financial hardship (example: EA Form / Form B and EPF statement for Malaysians OR Employer and Designation Total Household Income / Month #12;C. PERSONAL STATEMENT Please tell us

  2. Form Date 4/4/01 Refrigerant Service Order Form

    E-Print Network [OSTI]

    Russell, Lynn

    Recovery Unit ID # : Added Lbs oz Lbs oz Lbs oz Startup Charge Net Refrigerant Added: Lbs oz Parts UsedForm Date 4/4/01 Refrigerant Service Order Form Service ID: Owner: Work Order #: Building: Date: Issued: Completed: Equipment ID: Technicians: Location: Model: Manufact: Serial #: Refrigerant Type

  3. Contract Major Report Form Name __________________________

    E-Print Network [OSTI]

    Kostic, Milivoje M.

    Contract Major Report Form 12/1/94 Name __________________________ Degree __________________________ College __________________________ Descriptive title of contract major _______________________________________________ Current GAP is ___________ in ___________________ hours attempted. Summary of Proposed contract Major 1

  4. Homeowner Soil Sample Information Form

    E-Print Network [OSTI]

    Provin, Tony

    2007-04-11T23:59:59.000Z

    Homeowners should submit this form with their soil samples when requesting a soil test from the Texas A&M Soil Testing Laboratory....

  5. Chevron, GE form Technology Alliance

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    form Technology Alliance February 3, 2014 HOUSTON, TX, Feb. 3, 2014-Chevron Energy Technology Company and GE Oil & Gas announced today the creation of the Chevron GE Technology...

  6. forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered energy consumption byAbout SRNL HomeYoungCleanJournalMachine Control

  7. Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest Region service area. TheEPSCI HomeTours, ProgramsClean Energy Technologies

  8. DRIVER RECORD CHECK REQUEST FORM

    E-Print Network [OSTI]

    Amin, S. Massoud

    DRIVER RECORD CHECK REQUEST FORM This form must be submitted to the Sport Clubs Office at least TWO weeks prior to your club's departure and serves as a request for permission to become an approved driver, please email us at sportclb@umn.edu or call 612-625-6017. Driver Information *Enter the following

  9. STUDENT DISCIPLINARY ACTION FORM INSTRUCTIONS

    E-Print Network [OSTI]

    Baltisberger, Jay H.

    STUDENT DISCIPLINARY ACTION FORM INSTRUCTIONS Labor Program Office Berea College While one across campus. The "Student Disciplinary Action Form" was designed to provide labor supervisors directly with the student and discuss the matter in private. Calmly discuss the offense and the corrective

  10. Method of forming ceramic bricks

    DOE Patents [OSTI]

    Poeppel, Roger B. (Glen Ellyn, IL); Claar, Terry D. (Newark, DE); Silkowski, Peter (Urbana, IL)

    1988-01-01T23:59:59.000Z

    A method for forming free standing ceramic bricks for use as tritium breeder material is disclosed. Aqueous solutions of sodium carbonate and potassium carbonate are mixed with an organic hydrocolloid dispersion and powdered lithium carbonate, spray dried, and ceramic bricks formed by molding in a die and firing.

  11. Method of forming ceramic bricks

    DOE Patents [OSTI]

    Poeppel, R.B.; Claar, T.D.; Silkowski, P.

    1987-04-22T23:59:59.000Z

    A method for forming free standing ceramic bricks for use as tritium breeder material is disclosed. Aqueous solutions of sodium carbonate and potassium carbonate are mixed with an organic hydrocolloid dispersion and powdered lithium carbonate, spray dried, and ceramic bricks formed by molding in a die and firing.

  12. Triggered pore-forming agents

    DOE Patents [OSTI]

    Bayley, Hagan (Grafton, MA); Walker, Barbara J. (Auburn, MA); Chang, Chung-yu (Worcester, MA); Niblack, Brett (Nashville, TN); Panchal, Rekha (Shrewsbury, MA)

    1998-01-01T23:59:59.000Z

    An inactive pore-forming agent which is activated to lytic function by a condition such as pH, light, heat, reducing potential, or metal ion concentration, or substance such as a protease, at the surface of a cell.

  13. Natural ventilation generates building form

    E-Print Network [OSTI]

    Chen, Shaw-Bing

    1996-01-01T23:59:59.000Z

    Natural ventilation is an efficient design strategy for thermal comfort in hot and humid climates. The building forms can generate different pressures and temperatures to induce natural ventilation. This thesis develops a ...

  14. Introduction to differential forms II

    E-Print Network [OSTI]

    2005-01-05T23:59:59.000Z

    integrate a 2-form, one would have to sum up the integrals over each patch. ... field v which measures the velocity of the flow (e.g. the wind velocity). Then.

  15. Method for forming metal contacts

    DOE Patents [OSTI]

    Reddington, Erik; Sutter, Thomas C; Bu, Lujia; Cannon, Alexandra; Habas, Susan E; Curtis, Calvin J; Miedaner, Alexander; Ginley, David S; Van Hest, Marinus Franciscus Antonius Maria

    2013-09-17T23:59:59.000Z

    Methods of forming metal contacts with metal inks in the manufacture of photovoltaic devices are disclosed. The metal inks are selectively deposited on semiconductor coatings by inkjet and aerosol apparatus. The composite is heated to selective temperatures where the metal inks burn through the coating to form an electrical contact with the semiconductor. Metal layers are then deposited on the electrical contacts by light induced or light assisted plating.

  16. Sources: Energy Information Administration, Form EIA-182,

    U.S. Energy Information Administration (EIA) Indexed Site

    Sources: Energy Information Administration, Form EIA-182, "Domestic Crude Oil First Purchase Report"; Form EIA-856, "Monthly Foreign Crude Oil Acquisition Report"; and Form EIA-14,...

  17. Electromagnetic nucleon form factors in instant and point form

    E-Print Network [OSTI]

    T. Melde; K. Berger; L. Canton; W. Plessas; R. F. Wagenbrunn

    2007-09-30T23:59:59.000Z

    We present a study of the electromagnetic structure of the nucleons with constituent quark models in the framework of relativistic quantum mechanics. In particular, we address the construction of spectator-model currents in the instant and point forms. Corresponding results for the elastic nucleon electromagnetic form factors as well as charge radii and magnetic moments are presented. We also compare results obtained by different realistic nucleon wave functions stemming from alternative constituent quark models. Finally, we discuss the theoretical uncertainties that reside in the construction of spectator-model transition operators.

  18. Method of forming structural heliostat

    DOE Patents [OSTI]

    Anderson, Alfred J. (Littleton, CO)

    1984-06-26T23:59:59.000Z

    In forming a heliostat having a main support structure and pivoting and tilting motors and gears and a mirror module for reflecting solar energy onto a collector, the improvement characterized by a method of forming the mirror module in which the mirror is laid upon a solid rigid supporting bed in one or more sections, with or without focusing; a mirror backing sheet is applied by first applying respective thin layers of silicone grease and, thereafter, progressively rolling application to eliminate air bubbles; followed by affixing of a substrate assembly to the mirror backing sheet to form a mirror module that does not curve because of thermally induced stresses and differential thermal expansion or contraction effects. The silicone grease also serves to dampen fluttering of the mirror and protect the mirror backside against adverse effects of the weather. Also disclosed are specific details of preferred embodiments.

  19. FAQs for Survey Forms 914

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781 2,328 2,683DieselValues shown for the current twoForm789 andForm

  20. FORMS AND INSTRUCTIONS FOR SUBMITTING ELECTRIC

    E-Print Network [OSTI]

    CALIFORNIA ENERGY COMMISSION FORMS AND INSTRUCTIONS FOR SUBMITTING ELECTRIC TRANSMISSION Instructions for Electric Transmission Forms ............................................................. 6 General Instructions

  1. Group Study Room Policy and Reservation Form

    E-Print Network [OSTI]

    Reynolds, Albert C.

    to the Group Study Reservation Form. Fill out the web form and click "Send" to submit the request. A confirming

  2. Report Form for Program Termination

    E-Print Network [OSTI]

    Saskatchewan, University of

    Report Form for Program Termination Program(s) to be deleted: Effective date of termination: 1. List reasons for termination and describe the background leading to this decision. 2. Technical the last five years. #12;3. Impact of the termination. Internal 3.1 What if any impact

  3. Technetium Immobilization Forms Literature Survey

    SciTech Connect (OSTI)

    Westsik, Joseph H.; Cantrell, Kirk J.; Serne, R. Jeffrey; Qafoku, Nikolla

    2014-05-01T23:59:59.000Z

    Of the many radionuclides and contaminants in the tank wastes stored at the Hanford site, technetium-99 (99Tc) is one of the most challenging to effectively immobilize in a waste form for ultimate disposal. Within the Hanford Tank Waste Treatment and Immobilization Plant (WTP), the Tc will partition between both the high-level waste (HLW) and low-activity waste (LAW) fractions of the tank waste. The HLW fraction will be converted to a glass waste form in the HLW vitrification facility and the LAW fraction will be converted to another glass waste form in the LAW vitrification facility. In both vitrification facilities, the Tc is incorporated into the glass waste form but a significant fraction of the Tc volatilizes at the high glass-melting temperatures and is captured in the off-gas treatment systems at both facilities. The aqueous off-gas condensate solution containing the volatilized Tc is recycled and is added to the LAW glass melter feed. This recycle process is effective in increasing the loading of Tc in the LAW glass but it also disproportionally increases the sulfur and halides in the LAW melter feed which increases both the amount of LAW glass and either the duration of the LAW vitrification mission or the required supplemental LAW treatment capacity.

  4. COMPLIANCE FORMS SUMMARY APPENDIX A

    E-Print Network [OSTI]

    approach is utilized for compliance, the CF-1R forms are produced by the compliance software. Thermal Mass. Thermal Mass Worksheet (WS-1R) This worksheet is completed by the documentation author when complying is used to calculate weight-averaged U-factors for prescriptive envelope compliance. #12;Appendix

  5. ADMISSION INFORMATION FORM MSW Program

    E-Print Network [OSTI]

    Ward, Karen

    ADMISSION INFORMATION FORM MSW Program Please indicate the MSW degree plan(s) for which you would.5 overall GPA in social work courses) In completing your application to the MSW program, please be aware of the following: 1. The MSW courses start in the summer and are offered during the summer, fall and spring

  6. Resources Abstracts Input Transaction Form

    E-Print Network [OSTI]

    District of Columbia, University of the

    #12;Resources Abstracts Input Transaction Form 4. Title 5. Report Date 6.Urban Aquaculture Covered The University of the District of Columbia 12. Sponsoring Organization Water Resources Research of the rainbow trout (Salmo gairdneri) in a closed recycling water system in an urban environment is described

  7. Accident Report Form Victim's Name

    E-Print Network [OSTI]

    Amin, S. Massoud

    : Transported By: First Aid By: Witness Phone: Method of Transportation: ID# Male Female Time of Injury: am/pm Phone: [pink form] Age: Time Notified: am/pm Student Faculty Staff Public: Open Rec Aquatics COA Fitness an alcohol/water solution. - Dispose of the contaminated supplies (gauze, gloves, paper towel, etc.) using

  8. UWO Vehicle ACCIDENT REPORTING FORM

    E-Print Network [OSTI]

    Sinnamon, Gordon J.

    UWO Vehicle ­ ACCIDENT REPORTING FORM To be completed at the scene. (Important: Do not admit liability or discuss any settlement.) If there are personal injuries or severe damage to the vehicle, call 911. If vehicle is drivable and if it's safe to do so, pull to the side of road away from traffic. Put

  9. Spin-forming Project Report

    SciTech Connect (OSTI)

    Switzner, Nathan; Henry, Dick

    2009-03-20T23:59:59.000Z

    In a second development order, spin-forming equipment was again evaluated using the test shape, a hemispherical shell. In this second development order, pure vanadium and alloy titanium (Ti-6Al-4V) were spin-formed, as well as additional copper and 21-6-9 stainless. In the first development order the following materials had been spin-formed: copper (alloy C11000 ETP), 6061 aluminum, 304L stainless steel, 21-6-9 stainless steel, and tantalum-2.5% tungsten. Significant challenges included properly adjusting the rotations-per-minute (RPM), cracking at un-beveled edges and laser marks, redressing of notches, surface cracking, non-uniform temperature evolution in the titanium, and cracking of the tailstock. Lessons learned were that 300 RPM worked better than 600 RPM for most materials (at the feed rate of 800 mm/min); beveling the edges to lower the stress reduces edge cracking; notches, laser marks, or edge defects in the preform doom the process to cracking and failure; coolant is required for vanadium spin-forming; increasing the number of passes to nine or more eliminates surface cracking for vanadium; titanium develops a hot zone in front of the rollers; and the tailstock should be redesigned to eliminate the cylindrical stress concentrator in the center.

  10. Hawaii Well Abandonment Report Form (DLNR Form WAR) | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to: navigation,Ohio:Greer CountyCorridor |Information Abandonment Report Form (DLNR

  11. EMPLOYEE TRAINING GUIDE Mandatory Courses & Refresher Descriptions

    E-Print Network [OSTI]

    Gelfond, Michael

    Shipping - Designated Employees by Director Hilti - Designated Employees by Director Lockout/Refresher - Designated Employees by Director Lockout Tagout Confined Space Grounds Personnel In addition to trainings Distraction Fire Safety Lockout/Tagout Refrigeration Certification Utility Operator I&II #12;TTU Operations

  12. Vertical Contracts and Mandatory Universal Distribution

    E-Print Network [OSTI]

    Kammen, Daniel M.

    ). The issue of mandat- ing universal distribution (MUD) has arisen in many markets (e.g., movies, video games

  13. E. Required Information (MANDATORY) A. Information Category

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to UserProduct:DirectivesSAND2015-2127 O Dr.and technology for

  14. E. Required Information (MANDATORY) A. Information Category

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to UserProduct:DirectivesSAND2015-2127 O Dr.and technology for12/28/2012

  15. E. Required Information (MANDATORY) A. Information Category

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to UserProduct:DirectivesSAND2015-2127 O Dr.and technology for12/28/201224

  16. E. Required Information (MANDATORY) A. Information Category

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to UserProduct:DirectivesSAND2015-2127 O Dr.and technology

  17. E. Required Information (MANDATORY) A. Information Category

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to UserProduct:DirectivesSAND2015-2127 O Dr.and technology9/2013 ORP-54939

  18. Unsplit bipolar pulse forming line

    DOE Patents [OSTI]

    Rhodes, Mark A. (Pleasanton, CA)

    2011-05-24T23:59:59.000Z

    A bipolar pulse forming transmission line module and system for linear induction accelerators having first, second, third, and fourth planar conductors which form a sequentially arranged interleaved stack having opposing first and second ends, with dielectric layers between the conductors. The first and second planar conductors are connected to each other at the first end, and the first and fourth planar conductors are connected to each other at the second end via a shorting plate. The third planar conductor is electrically connectable to a high voltage source, and an internal switch functions to short at the first end a high voltage from the third planar conductor to the fourth planar conductor to produce a bipolar pulse at the acceleration axis with a zero net time integral. Improved access to the switch is enabled by an aperture through the shorting plate and the proximity of the aperture to the switch.

  19. Method of forming clathrate ice

    DOE Patents [OSTI]

    Hino, Toshiyuki (Tokyo, JP); Gorski, Anthony J. (Lemont, IL)

    1987-01-01T23:59:59.000Z

    A method of forming clathrate ice in a supercooled water-based liquid contained in a vessel is disclosed. Initially, an oscillator device is located in the liquid in the vessel. The oscillator device is then oscillated ultrasonically so that small crystals are formed in the liquid. These small crystals serve as seed crystals for ice formation in the liquid and thereby prevent supercooling of the liquid. Preferably, the oscillating device is controlled by a thermostat which initiates operation of the oscillator device when the temperature of the liquid is lowered to the freezing point. Thereafter, the operation of the oscillator device is terminated when ice is sensed in the liquid by an ice sensor.

  20. Method of forming calthrate ice

    DOE Patents [OSTI]

    Hino, T.; Gorski, A.J.

    1985-09-30T23:59:59.000Z

    A method of forming clathrate ice in a supercooled water-based liquid contained in a vessel is disclosed. Initially, an oscillator device is located in the liquid in the vessel. The oscillator device is then oscillated ultransonically so that small crystals are formed in the liquid. Thes small crystals serve as seed crystals for ice formation in the liquid and thereby prevent supercooling of the liquid. Preferably, the oscillating device is controlled by a thermostat which initiates operation of the oscillator device when the temperature of the liquid is lowered to the freezing point. Thereafter, the operation of the oscillator device is terminated when ice is sensed in the liquid by an ice sensor.

  1. Fuzzy logic of Aristotelian forms

    SciTech Connect (OSTI)

    Perlovsky, L.I. [Nichols Research Corp., Lexington, MA (United States)

    1996-12-31T23:59:59.000Z

    Model-based approaches to pattern recognition and machine vision have been proposed to overcome the exorbitant training requirements of earlier computational paradigms. However, uncertainties in data were found to lead to a combinatorial explosion of the computational complexity. This issue is related here to the roles of a priori knowledge vs. adaptive learning. What is the a-priori knowledge representation that supports learning? I introduce Modeling Field Theory (MFT), a model-based neural network whose adaptive learning is based on a priori models. These models combine deterministic, fuzzy, and statistical aspects to account for a priori knowledge, its fuzzy nature, and data uncertainties. In the process of learning, a priori fuzzy concepts converge to crisp or probabilistic concepts. The MFT is a convergent dynamical system of only linear computational complexity. Fuzzy logic turns out to be essential for reducing the combinatorial complexity to linear one. I will discuss the relationship of the new computational paradigm to two theories due to Aristotle: theory of Forms and logic. While theory of Forms argued that the mind cannot be based on ready-made a priori concepts, Aristotelian logic operated with just such concepts. I discuss an interpretation of MFT suggesting that its fuzzy logic, combining a-priority and adaptivity, implements Aristotelian theory of Forms (theory of mind). Thus, 2300 years after Aristotle, a logic is developed suitable for his theory of mind.

  2. CERAMIC WASTE FORM DATA PACKAGE

    SciTech Connect (OSTI)

    Amoroso, J.; Marra, J.

    2014-06-13T23:59:59.000Z

    The purpose of this data package is to provide information about simulated crystalline waste forms that can be used to select an appropriate composition for a Cold Crucible Induction Melter (CCIM) proof of principle demonstration. Melt processing, viscosity, electrical conductivity, and thermal analysis information was collected to assess the ability of two potential candidate ceramic compositions to be processed in the Idaho National Laboratory (INL) CCIM and to guide processing parameters for the CCIM operation. Given uncertainties in the CCIM capabilities to reach certain temperatures throughout the system, one waste form designated 'Fe-MP' was designed towards enabling processing and another, designated 'CAF-5%TM-MP' was designed towards optimized microstructure. Melt processing studies confirmed both compositions could be poured from a crucible at 1600{degrees}C although the CAF-5%TM-MP composition froze before pouring was complete due to rapid crystallization (upon cooling). X-ray diffraction measurements confirmed the crystalline nature and phase assemblages of the compositions. The kinetics of melting and crystallization appeared to vary significantly between the compositions. Impedance spectroscopy results indicated the electrical conductivity is acceptable with respect to processing in the CCIM. The success of processing either ceramic composition will depend on the thermal profiles throughout the CCIM. In particular, the working temperature of the pour spout relative to the bulk melter which can approach 1700{degrees}C. The Fe-MP composition is recommended to demonstrate proof of principle for crystalline simulated waste forms considering the current configuration of INL's CCIM. If proposed modifications to the CCIM can maintain a nominal temperature of 1600{degrees}C throughout the melter, drain, and pour spout, then the CAF-5%TM-MP composition should be considered for a proof of principle demonstration.

  3. Benefit Forms | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in Review: Top Five EEREDepartment ofEnergy StevenHouseField Experiment |Benefit Forms

  4. Chevron, GE form Technology Alliance

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed New Substation SitesStandingtheirCheck InChemistry OxideChenChevron, GE form

  5. PURPOSE FORM INSTRUCTIONS Item Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006 TheSteven Ashby Dr. Steven Para buscarBurbank,Nita5PURPOSE FORM

  6. Why Do Disks Form Jets?

    E-Print Network [OSTI]

    D Lynden-Bell

    2002-03-27T23:59:59.000Z

    It is argued that jet modelers have given insufficient study to the natural magneto-static configurations of field wound up in the presence of a confining general pressure. Such fields form towers whose height grows with each twist at a velocity comparable to the circular velocity of the accretion disk that turns them. A discussion of the generation of such towers is preceded by a brief history of the idea that quasars, active galaxies, and galactic nuclei contain giant black holes with accretion disks.

  7. NDSL Forms | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to:46 -Energieprojekte3 ClimateSpurrInformation NAMA-Programme forBMP GuideNDSL Forms

  8. ADOT Forms | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 SouthWater Rights,Information Of TheFixed Logo:Use LandsADOT FormsLegal

  9. 2011Form EIA-902 Instructions

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:SeadovCooperativeA2. World liquids consumption by region, ReferenceG (2005) -U. S. FORM

  10. FAQs for Survey Forms 914

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781 2,328 2,683DieselValues shown for the current twoForm789 and

  11. Forms | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickr Flickr Editor's note: SincePlant Name: (MM))PublicationsForms

  12. CSLB Forms | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin: EnergyBoston Areais3: Crystalline Rock -COPPE Incubator JumpISES-Forms Jump to:

  13. CSLC Forms | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin: EnergyBoston Areais3: Crystalline Rock -COPPE Incubator JumpISES-FormsCSLC

  14. Unexpected, Stable Form of Uranium Detected | EMSL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Unexpected, Stable Form of Uranium Detected Unexpected, Stable Form of Uranium Detected Insights on underappreciated reaction could shed light on environmental cleanup options...

  15. Arizona Department of Environmental Quality's Application Forms...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Web Site: Arizona Department of Environmental Quality's Application Forms and Guidance Website Abstract This site contains forms...

  16. Alumina forming iron base superalloy

    SciTech Connect (OSTI)

    Yamamoto, Yukinori; Muralidharan, Govindarajan; Brady, Michael P.

    2014-08-26T23:59:59.000Z

    An austenitic stainless steel alloy, consists essentially of, in weight percent 2.5 to 4 Al; 25 to 35 Ni; 12 to 19 Cr; at least 1, up to 4 total of at least one element selected from the group consisting of Nb and Ta; 0.5 to 3 Ti; less than 0.5 V; 0.1 to 1 of at least on element selected from the group consisting of Zr and Hf; 0.03 to 0.2 C; 0.005 to 0.1 B; and base Fe. The weight percent Fe is greater than the weight percent Ni. The alloy forms an external continuous scale including alumina, and contains coherent precipitates of .gamma.'-Ni.sub.3Al, and a stable essentially single phase FCC austenitic matrix microstructure. The austenitic matrix is essentially delta-ferrite-free and essentially BCC-phase-free.

  17. Miscellaneous Waste-Form FEPs

    SciTech Connect (OSTI)

    A. Schenker

    2000-12-08T23:59:59.000Z

    The US DOE must provide a reasonable assurance that the performance objectives for the Yucca Mountain Project (YMP) potential radioactive-waste repository can be achieved for a 10,000-year post-closure period. The guidance that mandates this direction is under the provisions of 10 CFR Part 63 and the US Department of Energy's ''Revised Interim Guidance Pending Issuance of New US Nuclear Regulatory Commission (NRC) Regulations (Revision 01, July 22, 1999), for Yucca Mountain, Nevada'' (Dyer 1999 and herein referred to as DOE's Interim Guidance). This assurance must be demonstrated in the form of a performance assessment that: (1) identifies the features, events, and processes (FEPs) that might affect the performance of the potential geologic repository; (2) examines the effects of such FEPs on the performance of the potential geologic repository; (3) estimates the expected annual dose to a specified receptor group; and (4) provides the technical basis for inclusion or exclusion of specific FEPs.

  18. Cognitive Science Minor Approval Form Name __________________________________________ ID # _________________________

    E-Print Network [OSTI]

    Gering, Jon C.

    Cognitive Science Minor Approval Form Name __________________________________________ ID: ___________________________________________________ _______________ Cognitive Science Minor Committee Date

  19. Metered Mail Form International Mail Only

    E-Print Network [OSTI]

    Palmeri, Thomas

    Metered Mail Form International Mail Only Charge to Department USPS First Class Mail International International Metered Mail Form and must be kept separate from all other domestic mail. · International mail

  20. GT Human Resources PERSONAL DATA FORM

    E-Print Network [OSTI]

    Garmestani, Hamid

    GT Human Resources PERSONAL DATA FORM Page 1 Updated: 0//201 Student Employee? Yes No Print clearly.: _________________________________ Job Title: Email: _________________________________ #12;GT Human Resources PERSONAL DATA FORM Page 2 using black or blue ink. Personal Information Name

  1. GT Human Resources PERSONAL DATA FORM

    E-Print Network [OSTI]

    Jacobs, Laurence J.

    GT Human Resources PERSONAL DATA FORM Page 1 Updated: 05/01/2014 Student Employee? Yes No Print.: _________________________________ Job Title: _________________________________ #12;GT Human Resources PERSONAL DATA FORM Page 2 Updated clearly using black or blue ink. Personal Information Name

  2. FORMS AND INSTRUCTIONS FOR SUBMITTING ELECTRIC

    E-Print Network [OSTI]

    for Electric Transmission Forms....................................................... 5 General InstructionsCALIFORNIA ENERGY COMMISSION FORMS AND INSTRUCTIONS FOR SUBMITTING ELECTRIC TRANSMISSION Integrated Energy Policy Report and the 2007 Strategic Transmission Investment Plan. Keywords Electric

  3. Experiential Component Approval Form Concentration in Nanotechnology

    E-Print Network [OSTI]

    Goldberg, Bennett

    Experiential Component Approval Form Concentration in Nanotechnology Return completed form to ENG Plan to complete the experiential component as a requirement for the concentration in Nanotechnology to complete the experiential component for the Nanotechnology Concentration by: Research Experience in Lab

  4. Stability Index of Interaction forms Joseph Abdou

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Stability Index of Interaction forms Joseph Abdou December 15, 2008 Abstract An interaction form, 106-112 boulevard de l'H^opital 75647 Paris Cedex 13 - France; email: abdou@univ-paris1.fr 1 halshs

  5. Data Form Number and Name Responsible Office(s) CIHE Data Form Gen

    E-Print Network [OSTI]

    Snider, Barry B.

    N E A S C D A T A F O R M S #12;Data Form Number and Name Responsible Office(s) CIHE Data Form Gen: General Information Form President's Office CIHE Data Form 1: Statement of Financial Position Executive Vice President CIHE Data Form 2-1: Statement of Unrestricted Revenues and Expenses Executive Vice

  6. MoIAC Pre-Audit Form Ways to submit this form

    E-Print Network [OSTI]

    Noble, James S.

    information: #12;MoIAC Pre-Audit Form Major Energy Consuming Equipment: Please provide informationMoIAC Pre-Audit Form Ways to submit this form: 1. Fill up the form and fax it to 573-882-2693 Attn: Dr. Bin Wu 2. Print and return this form by mail to: Dr. Bin Wu University of Missouri

  7. Computing Valuation Popov Forms Mark Giesbrecht1

    E-Print Network [OSTI]

    Labahn, George

    Computing Valuation Popov Forms Mark Giesbrecht1 , George Labahn1 , and Yang Zhang2 1 School. Popov forms and weak Popov forms of matrices over non- commutative valuation domains are defined rings. In the computer alge- bra area, Abramov and Bronstein [1] gave a method to calculate the ranks

  8. CPR/AED Training Payment Form

    E-Print Network [OSTI]

    Yang, Zong-Liang

    CPR/AED Training Payment Form This form must be completed and submitted along with payment in order to participate in TxClass PN 900 CPR/AED Training. Cost to participate is $30. Payment may be in the form of IDT account or check payable to UT Austin. Upon receipt of payment and completion of training class

  9. Automated Fuel Dispensing System Form Instructions

    E-Print Network [OSTI]

    Fernandez, Eduardo

    Automated Fuel Dispensing System Form Instructions If additional forms are necessary to provide(s) are hired and will be obtaining fuel, an Add Driver Form MUST be submitted for entry into the web database and/or diesel fuel to operate. Note: When a new vehicle, golf cart (gasoline), etc., is placed

  10. SMITH NORMAL FORM AND LAPLACIANS DINO LORENZINI

    E-Print Network [OSTI]

    Lorenzini, Dino J.

    SMITH NORMAL FORM AND LAPLACIANS DINO LORENZINI Abstract. Let M denote the Laplacian matrix of a graph G. Associated with G is a finite group (G), obtained from the Smith normal form of M, and whose /Im(M). This group can be computed in practice using the Smith normal form of M, as follows. Given any

  11. Singular Value Decomposition (SVD) and Polar Form

    E-Print Network [OSTI]

    Gallier, Jean

    : E # F and g: F # E are linear maps, then g #f and f #g always have the same non­zero eigen­ valuesChapter 2 Singular Value Decomposition (SVD) and Polar Form 2.1 Polar Form In this chapter, we. SINGULAR VALUE DECOMPOSITION (SVD) AND POLAR FORM The fact that f # # f and f # f # are self

  12. PeopleSoft Projectp j Postdoc Web FormsPostdoc Web Forms

    E-Print Network [OSTI]

    Kay, Mark A.

    PeopleSoft Projectp j Postdoc Web FormsPostdoc Web Forms What to Expect and How to Prepare. Web Forms and interfaces to support all Postdoc administrative processes and system

  13. Application Form for Replacement Diploma/Program Certificate (Form must be notarized)

    E-Print Network [OSTI]

    Application Form for Replacement Diploma/Program Certificate (Form must be notarized) Complete to Princeton University as follows: Replacement Diploma - $75 Replacement Program Certificate - $30 Please

  14. HOTEL RESERVATION FORM CSCLP 2009-Annual ERCIM Workshop on Constraint Solving and Constraint Logic Programming

    E-Print Network [OSTI]

    Larrosa, Javier

    Programming June, 15 - 17, 2009 Surname* Name* Country Telephone E-mail* *mandatory fields HOTEL RATES SINGLE-mail: olga@activacongresos.com ACTIVA CONGRESOS, S.L informs you that all your personal data collected by the fulfillment of this document will be stored in an automated processing file of our property registered

  15. INSTRUCTIONS Request for Implant, Instrument or Supply for Procedure Form MM-12

    E-Print Network [OSTI]

    Oliver, Douglas L.

    To: Karen Grady, Materials Management Resource Manager Materials & Logistics Management Room #: LB058 ____________________________________________________ Typed Name - Mandatory Date: OFFICE MATERIALS & LOGISTICS MANAGEMENT (MLM) Reference #: Page 1 of 2 #12;SECTION 2 (To be ccompleted by Materials Management): On Contract?: Yes No If "Yes", Contract #: Product

  16. Free-form Smeared Bottomonium Correlation Functions

    E-Print Network [OSTI]

    Mark Wurtz; Randy Lewis; R. M. Woloshyn

    2014-09-24T23:59:59.000Z

    Gauge-invariant sources with a hydrogen wave function shape are constructed for bottomonium two-point correlation functions using the free-form smearing technique. The bottomonium spectrum, including a first lattice result for the D-wave first-excited state, is extracted from free-form smeared correlation functions. Results are compared with conventional smearing techniques and free-form smearing is found to have the advantage of reduced statistical errors.

  17. Revision 08 (08/10) Form G Radioactive Waste Disposal Form

    E-Print Network [OSTI]

    Nair, Sankar

    Revision 08 (08/10) Form G Radioactive Waste Disposal Form RS - 19g Proc. 9290, 9501 General Instructions: 1. Do not mix different waste forms together. Keep dry, liquid, and scintillation vials separate. 2. Do not mix waste of different isotopes. 3. Entries are to be made on this form each time waste

  18. Nucleon Form Factor Measurements and Interpretation

    SciTech Connect (OSTI)

    Charles F. Perdrisat

    2007-08-22T23:59:59.000Z

    The data base for the form factors of the nucleon obtained from elastic ep scattering is discussed, as well as some recent developments in their calculation.

  19. WYSS TECHNOLOGY DEVELOPMENT FELLOWSHIP NOMINATION FORM

    E-Print Network [OSTI]

    WYSS TECHNOLOGY DEVELOPMENT FELLOWSHIP NOMINATION FORM 1. Biographical Sketch _____________________________________________ ________________________________________ Wyss Enabling Technology Platform Focus research plans relative to Wyss Enabling Technology Platform. 3. Enclose supporting letter from nominator

  20. Spinor One-forms as Gravitational Potentials

    E-Print Network [OSTI]

    Roh Suan Tung; Ted Jacobson

    1995-02-23T23:59:59.000Z

    General relativity is derived from an action which is quadratic in the covariant derivative of certain spinor one-form gravitational potentials. Either a pair of 2-component spinor one-forms or a single Dirac spinor one-form can be employed. The metric is a quadratic function of these spinor one-forms. In the 2-component spinor formulation the action differs from the usual chiral action for general relativity by a total differential. In the Dirac spinor formulation the action is the real part of the former one. The Hamiltonian is related to the ones in positive energy proofs and spinorial quasilocal mass constructions.

  1. Secondary Waste Forms and Technetium Management

    Office of Environmental Management (EM)

    Secondary Waste Forms and Technetium Management Joseph H. Westsik, Jr. Pacific Northwest National Laboratory EM HLW Corporate Board Meeting November 18, 2010 What are Secondary...

  2. Contact Form - DOE Directives, Delegations, and Requirements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Contact Form by Diane Johnson Directives are the Department of Energy's Primary means of establishing policies, requirements, responsibilities, and procedures for Departmental...

  3. Superior Energy Performance Enrollment and Application Forms...

    Broader source: Energy.gov (indexed) [DOE]

    Forms for Superior Energy Performance (SEP(tm)) Industrial Participants. SEP, built on ISO 50001 framework, provides a globally recognized system that U.S. industrial facilities...

  4. Better Buildings Residential Network Membership Form

    Energy Savers [EERE]

    Membership Form BETTER BUILDINGS RESIDENTIAL NETWORK Type of Organization (Check all that apply) ConsultantAdvisor Manufacturer ContractorTrade ally Nonprofit organization...

  5. Metered Mail Form Domestic Mail Only

    E-Print Network [OSTI]

    Palmeri, Thomas

    Metered Mail Form Domestic Mail Only For USPS Mail Only Charge to Department First Class Mail Media Meter Form. · All outgoing USPS Mail that needs postage should be kept separate from all other mail already be sealed prior to being metered. Failure to properly seal this type of mail could result

  6. Dense colloidal fluids form denser amorphous sediments

    E-Print Network [OSTI]

    Schofield, Andrew B.

    Dense colloidal fluids form denser amorphous sediments Shir R. Libera,b , Shai Borohovicha of their randomly packed solid sediments. We demonstrate that the most dilute fluids of colloidal hard spheres form loosely packed sediments, where the volume fraction of the particles approaches in frictional systems

  7. Methods for forming long subsurface heaters

    DOE Patents [OSTI]

    Kim, Dong Sub

    2013-09-17T23:59:59.000Z

    A method for forming a longitudinal subsurface heater includes longitudinally welding an electrically conductive sheath of an insulated conductor heater along at least one longitudinal strip of metal. The longitudinal strip is formed into a tubular around the insulated conductor heater with the insulated conductor heater welded along the inside surface of the tubular.

  8. CONTRACT ROUTING FORM LOUISIANA TECH UNIVERSITY

    E-Print Network [OSTI]

    Selmic, Sandra

    CONTRACT ROUTING FORM LOUISIANA TECH UNIVERSITY This form is designed for use in routing contracts Services Contracts or contracts administered through the Office of University Research. Name of Person initiating the Routing Process Name of Department Other Party (on contract) Purpose of contract or work

  9. Bioenergy Business Partner Information Gathering Form

    E-Print Network [OSTI]

    Bioenergy Business Partner Information Gathering Form Fax completed form to the Agribusiness.hnei.hawaii.edu/bmpp/stakeholders.asp Partners are organizations that perform, intend to perform, or should perform bioenergy processes and/or requirements. Please tell us about your organization and the role it plays in bioenergy production in Hawaii

  10. School of Music Faculty Absence Information Form

    E-Print Network [OSTI]

    School of Music Faculty Absence Information Form Please submit completed form to the Director of the School of Music in compliance with School & University policy on time and attendance tracking. Name these in your place? How does this absence relate to your responsibilities as a faculty member in the School

  11. THE UNLV FOUNDATION MONETARY TRANSFER FORM

    E-Print Network [OSTI]

    Hemmers, Oliver

    THE UNLV FOUNDATION MONETARY TRANSFER FORM (Use one form for each account) Date Department Amount Transfer from Foundation Account Name UNLV Foundation Foundation Account Number Transfer to University contributions to this fund were accepted. Multiple Transfer A monetary transfer from the UNLV Foundation

  12. THE UNLV FOUNDATION MONETARY TRANSFER FORM

    E-Print Network [OSTI]

    Walker, Lawrence R.

    THE UNLV FOUNDATION MONETARY TRANSFER FORM (Use one form for each account) Date Department Amount Transfer from Foundation Account Name UNLV Foundation Foundation Account Number Transfer to University contributions to this fund were accepted. If Foundation account number does not equal BOR account number

  13. Master Project Assessment Form Student: ID number

    E-Print Network [OSTI]

    Franssen, Michael

    Master Project Assessment Form Student: ID number: Master Program: Graduation supervisor Graduation presentation Defense Execution of the project Grade Signature of supervisor Date * Hand in at the student administration (MF 3.068) together with an official result form (uitslagbon) #12;"Master Project

  14. IMPORTED SOIL OR SOIL-FORMING MATERIALS

    E-Print Network [OSTI]

    IMPORTED SOIL OR SOIL-FORMING MATERIALS PLACEMENT BPG NOTE 5 Best Practice Guidance for Land of heavy industry. Soil material initially present on a site may have been removed or stored in bunds the original soil that has been stored or importing a soil from elsewhere or using a soil-forming material

  15. BRYANT UNIVERSITY INTERNATIONAL STUDENT TRANSFER FORM

    E-Print Network [OSTI]

    Blais, Brian

    BRYANT UNIVERSITY INTERNATIONAL STUDENT TRANSFER FORM Bryant University requires this form at __________________________________to provide the information requested below in order to complete my transfer to Bryant University for International Admission Bryant University Office of Admission 1150 Douglas Pike Smithfield, RI 02917 (401) 232

  16. Deformation and Forming of Joined Materials

    SciTech Connect (OSTI)

    Carsley, John; Hovanski, Yuri; Clarke, Kester D.; Krajewski, Paul E.

    2014-09-23T23:59:59.000Z

    Introductory article to a set of invited papers from the TMS committee on shaping and forming. This paper introduces a set of papers that were prepared to discussing the deformation and forming of joined materials, and to announce an upcoming symposium at the 2015 MS&T meeting in Columbus Ohio.

  17. Above Ground Storage Tank (AST) Inspection Form

    E-Print Network [OSTI]

    Pawlowski, Wojtek

    Above Ground Storage Tank (AST) Inspection Form Petroleum Bulk Storage Form Facility Name: ______________________ Tank No:_______________ Date:_____________ Inspection Parameter Result Comments/Corrective Actions 1. Is there leaking in the interstitial space (not DRY)? YES/NO/NA 2. Tank surface shows signs of leakage? YES/NO/NA 3

  18. University of Pittsburgh Vehicle Accident Report Form

    E-Print Network [OSTI]

    Sibille, Etienne

    University of Pittsburgh Vehicle Accident Report Form To be completed by the driver immediately following the accident (if medically able) and return this completed form to Fleet Services, Dept of Parking-624-1817 A. Report Date: ______/______/_______ B: Accident Data Date of accident

  19. Form Identification No. (For Departmental Use)

    E-Print Network [OSTI]

    Sheldon, Nathan D.

    you will need to refer to the COSHH assessment form for each hazardous substance being used a certain volume of your test sample into the polypot. 2) Form a complex compound that absorbs the light the transmitance of the solution with the photometer. c. Location of procedure/experiment/process. Field, Lab d

  20. Methods of forming semiconductor devices and devices formed using such methods

    DOE Patents [OSTI]

    Fox, Robert V; Rodriguez, Rene G; Pak, Joshua

    2013-05-21T23:59:59.000Z

    Single source precursors are subjected to carbon dioxide to form particles of material. The carbon dioxide may be in a supercritical state. Single source precursors also may be subjected to supercritical fluids other than supercritical carbon dioxide to form particles of material. The methods may be used to form nanoparticles. In some embodiments, the methods are used to form chalcopyrite materials. Devices such as, for example, semiconductor devices may be fabricated that include such particles. Methods of forming semiconductor devices include subjecting single source precursors to carbon dioxide to form particles of semiconductor material, and establishing electrical contact between the particles and an electrode.

  1. Slab edge insulating form system and methods

    DOE Patents [OSTI]

    Lee, Brain E. (Corral de Tierra, CA); Barsun, Stephan K. (Davis, CA); Bourne, Richard C. (Davis, CA); Hoeschele, Marc A. (Davis, CA); Springer, David A. (Winters, CA)

    2009-10-06T23:59:59.000Z

    A method of forming an insulated concrete foundation is provided comprising constructing a foundation frame, the frame comprising an insulating form having an opening, inserting a pocket former into the opening; placing concrete inside the foundation frame; and removing the pocket former after the placed concrete has set, wherein the concrete forms a pocket in the placed concrete that is accessible through the opening. The method may further comprise sealing the opening by placing a sealing plug or sealing material in the opening. A system for forming an insulated concrete foundation is provided comprising a plurality of interconnected insulating forms, the insulating forms having a rigid outer member protecting and encasing an insulating material, and at least one gripping lip extending outwardly from the outer member to provide a pest barrier. At least one insulating form has an opening into which a removable pocket former is inserted. The system may also provide a tension anchor positioned in the pocket former and a tendon connected to the tension anchor.

  2. USHER: Improving Data Quality with Dynamic Forms

    E-Print Network [OSTI]

    Kuang Chen; Harr Chen; Neil Conway; Joseph M. Hellerstein; Tapan S. Parikh

    Abstract Data quality is a critical problem in modern databases. Data entry forms present the first and arguably best opportunity for detecting and mitigating errors, but there has been little research into automatic methods for improving data quality at entry time. In this paper, we propose USHER, an endto-end system for form design, entry, and data quality assurance. Using previous form submissions, USHER learns a probabilistic model over the questions of the form. USHER then applies this model at every step of the data entry process to improve data quality. Before entry, it induces a form layout that captures the most important data values of a form instance as quickly as possible. During entry, it dynamically adapts the form to the values being entered, and enables real-time feedback to guide the data enterer toward their intended values. After entry, it re-asks questions that it deems likely to have been entered incorrectly. We evaluate all three components of USHER using two real-world data sets. Our results demonstrate that each component has the potential to improve data quality considerably, at a reduced cost when compared to current practice. I.

  3. Superplastic forming using NIKE3D

    SciTech Connect (OSTI)

    Puso, M.

    1996-12-04T23:59:59.000Z

    The superplastic forming process requires careful control of strain rates in order to avoid strain localizations. A load scheduler was developed and implemented into the nonlinear finite element code NIKE3D to provide strain rate control during forming simulation and process schedule output. Often the sheets being formed in SPF are very thin such that less expensive membrane elements can be used as opposed to shell elements. A large strain membrane element was implemented into NIKE3D to assist in SPF process modeling.

  4. Phenomenology of the Deuteron Electromagnetic Form Factors

    E-Print Network [OSTI]

    TheJLAB t20 collaboration; D. Abbott

    2000-02-25T23:59:59.000Z

    A rigorous extraction of the deuteron charge form factors from tensor polarization data in elastic electron-deuteron scattering, at given values of the 4-momentum transfer, is presented. Then the world data for elastic electron-deuteron scattering is used to parameterize, in three different ways, the three electromagnetic form factors of the deuteron in the 4-momentum transfer range 0-7 fm^-1. This procedure is made possible with the advent of recent polarization measurements. The parameterizations allow a phenomenological characterization of the deuteron electromagnetic structure. They can be used to remove ambiguities in the form factors extraction from future polarization data.

  5. Forms & Guides - HPMC Occupational Health Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsing ZirconiaPolicyFeasibilityFieldMinds" Give Forms (All forms are in .pdfForms

  6. Test Scanning Request Form Please complete one form for each test and key.

    E-Print Network [OSTI]

    Pantaleone, Jim

    Test Scanning Request Form Please complete one form for each test and key. This Section: Test Name: Contact Person: Email Regarding This Scan Date Received Time Initials Number of Tests Scored: / / : A.M. P

  7. SENIOR PROJECT PROPOSAL FORM Attach this completed form to your Honors Senior Proposal

    E-Print Network [OSTI]

    Huang, Haiying

    SENIOR PROJECT PROPOSAL FORM Attach this completed form to your Honors Senior Proposal I. PERSONAL#:________________________________ Anticipated Graduation Date: _____________________________ Date Submitted: ___________________________ Major: __________________________________ II. PROJECT INFORMATION Type of Project: Consult the departmental options informational sheet

  8. SENIOR PROJECT APPROVAL FORM Submit this completed form with your Honors Senior Project

    E-Print Network [OSTI]

    Huang, Haiying

    SENIOR PROJECT APPROVAL FORM Submit this completed form with your Honors Senior Project I. PERSONAL#: ______________________________________ Anticipated Graduation Date: ______________________ Date Submitted: _________________________________ Mav: _______________________________________ Classification: Junior Senior II. PROJECT INFORMATION Type of Project: Thesis Group Project Internship Creative

  9. Directory of Energy Data Collection Forms: Forms in use as of October 1996

    SciTech Connect (OSTI)

    NONE

    1996-12-01T23:59:59.000Z

    This is the twentieth edition of the Directory of Energy Collection Data Forms, an authoritative listing of selected public use forms currently used as basic energy information gathering tools by the Department of Energy.

  10. Front contact solar cell with formed emitter

    SciTech Connect (OSTI)

    Cousins, Peter John

    2014-11-04T23:59:59.000Z

    A bipolar solar cell includes a backside junction formed by an N-type silicon substrate and a P-type polysilicon emitter formed on the backside of the solar cell. An antireflection layer may be formed on a textured front surface of the silicon substrate. A negative polarity metal contact on the front side of the solar cell makes an electrical connection to the substrate, while a positive polarity metal contact on the backside of the solar cell makes an electrical connection to the polysilicon emitter. An external electrical circuit may be connected to the negative and positive metal contacts to be powered by the solar cell. The positive polarity metal contact may form an infrared reflecting layer with an underlying dielectric layer for increased solar radiation collection.

  11. Front contact solar cell with formed emitter

    DOE Patents [OSTI]

    Cousins, Peter John (Menlo Park, CA)

    2012-07-17T23:59:59.000Z

    A bipolar solar cell includes a backside junction formed by an N-type silicon substrate and a P-type polysilicon emitter formed on the backside of the solar cell. An antireflection layer may be formed on a textured front surface of the silicon substrate. A negative polarity metal contact on the front side of the solar cell makes an electrical connection to the substrate, while a positive polarity metal contact on the backside of the solar cell makes an electrical connection to the polysilicon emitter. An external electrical circuit may be connected to the negative and positive metal contacts to be powered by the solar cell. The positive polarity metal contact may form an infrared reflecting layer with an underlying dielectric layer for increased solar radiation collection.

  12. USHER: Improving data quality with dynamic forms

    E-Print Network [OSTI]

    Chen, Harr

    Data quality is a critical problem in modern databases. Data entry forms present the first and arguably best opportunity for detecting and mitigating errors, but there has been little research into automatic methods for ...

  13. GT Human Resources PERSONAL DATA FORM

    E-Print Network [OSTI]

    Jacobs, Laurence J.

    GT Human Resources PERSONAL DATA FORM Page 1 Updated: 05/01/2014 Student Employee? Yes No Print clearly using black or blue ink. Personal Information Name) __________________________________________________________________________________________ (City) (State) (Zip) (County) Personal Telephone #: (_______)________-__________ GT Work Telephone

  14. MECHANICAL ENGINEERING TRAVEL AUTHORIZATION INFORMATION FORM

    E-Print Network [OSTI]

    Sutton, Michael

    . ______________ Estimated Cost AMOUNT Transportation (Does not include USC vehicle) Subsistence Other Expenses (EXPLAINMECHANICAL ENGINEERING TRAVEL AUTHORIZATION INFORMATION FORM Requested) Estimated Total Cost Account(s) to be charged Dept. Fund Class Analytical Amount** Method of Travel Common

  15. student handbook forms Shawwal 18, 1424

    E-Print Network [OSTI]

    Thomas, David D.

    student handbook forms Shawwal 18, 1424 THREE-MEMBER ADVISING COMMITTEE (TMC) REPORT, INITIAL MEETING DEGREE PROGRAM IN SCIENTIFIC COMPUTATION Student:_______________________________________________________________________________ ____________________________________________________________________________________ 2. Comments concerning student plans and recommendations: If student is entering as an advanced

  16. Radiation Safety Committee Laser Use Registration Form

    E-Print Network [OSTI]

    de Lijser, Peter

    Radiation Safety Committee Laser Use Registration Form Pulsed Duration (sec) Average Power: Pulse operating procedures and specific approval conditions required by the Radiation Safety Committee now of Radiation Safety Committee Chair Date #12;

  17. Assessment of Preferred Depleted Uranium Disposal Forms

    SciTech Connect (OSTI)

    Croff, A.G.; Hightower, J.R.; Lee, D.W.; Michaels, G.E.; Ranek, N.L.; Trabalka, J.R.

    2000-06-01T23:59:59.000Z

    The Department of Energy (DOE) is in the process of converting about 700,000 metric tons (MT) of depleted uranium hexafluoride (DUF6) containing 475,000 MT of depleted uranium (DU) to a stable form more suitable for long-term storage or disposal. Potential conversion forms include the tetrafluoride (DUF4), oxide (DUO2 or DU3O8), or metal. If worthwhile beneficial uses cannot be found for the DU product form, it will be sent to an appropriate site for disposal. The DU products are considered to be low-level waste (LLW) under both DOE orders and Nuclear Regulatory Commission (NRC) regulations. The objective of this study was to assess the acceptability of the potential DU conversion products at potential LLW disposal sites to provide a basis for DOE decisions on the preferred DU product form and a path forward that will ensure reliable and efficient disposal.

  18. ACCOUNTS PAYABLE CHECK REQUEST FORM Vendor Name

    E-Print Network [OSTI]

    de Lijser, Peter

    ACCOUNTS PAYABLE CHECK REQUEST FORM Vendor Name Remit to Address City State Zip Code SECTION 2 INSTRUCTIONS Use the link to view approved categories. Vendor Number (if known) DP Requester AP Entry Check

  19. A Bakery : in search of appropriate form

    E-Print Network [OSTI]

    Kuzmic, Katri

    1982-01-01T23:59:59.000Z

    During the process of designing a building there occurs the continuous task of finding the forms, materials and structure that are fit to the particular building or situation at hand. It is the intent to combine these ...

  20. Elevated temperature forming method and preheater apparatus

    DOE Patents [OSTI]

    Krajewski, Paul E; Hammar, Richard Harry; Singh, Jugraj; Cedar, Dennis; Friedman, Peter A; Luo, Yingbing

    2013-06-11T23:59:59.000Z

    An elevated temperature forming system in which a sheet metal workpiece is provided in a first stage position of a multi-stage pre-heater, is heated to a first stage temperature lower than a desired pre-heat temperature, is moved to a final stage position where it is heated to a desired final stage temperature, is transferred to a forming press, and is formed by the forming press. The preheater includes upper and lower platens that transfer heat into workpieces disposed between the platens. A shim spaces the upper platen from the lower platen by a distance greater than a thickness of the workpieces to be heated by the platens and less than a distance at which the upper platen would require an undesirably high input of energy to effectively heat the workpiece without being pressed into contact with the workpiece.

  1. Oklahoma 4-H Enrollment Form Today's Date: ___________________

    E-Print Network [OSTI]

    Ghajar, Afshin J.

    - wind, electric, hydro, solar, gas, oil, coal, etc. EOklahoma 4-H Enrollment Form Today's Date: ___________________ Personal Information First Name student/child to receive direct electric/USP communications from 4-H / OCES staff for educational

  2. Furman University Cell Phone Allowance Request Form

    E-Print Network [OSTI]

    Furman University Cell Phone Allowance Request Form Date Payment: $___________ All cell phone allowance payments are departmental responsibility and considered other compensation charged to object code ________. The cell phone allowance will start at the next

  3. Better Buildings Residential Network Membership Form | Department...

    Energy Savers [EERE]

    toolbar and click "Save As." A "Save As" window will prompt you to save the form to a directory on your computer. Select your desired directory and click the "Save" button. You...

  4. On the signature of the Shapovalov form

    E-Print Network [OSTI]

    Yee, Wai Ling, 1977-

    2004-01-01T23:59:59.000Z

    Classifying the irreducible unitary representations of a real reductive group is equivalent to the algebraic problem of classifying the Harish-Chandra modules admitting a positive definite invariant Hermitian form. Finding ...

  5. FINAL STAFF REPORT FORMS AND INSTRUCTIONS FOR

    E-Print Network [OSTI]

    FINAL STAFF REPORT FORMS AND INSTRUCTIONS FOR ELECTRICITY DEMAND FORECASTS Prepared in Support. The information relates to electricity demand forecasts, demand-side management and energy efficiency impacts-2012. Keywords: Electricity demand, consumption, forecast, peak, self-generation, conservation, demand

  6. COMMISSION REPORT FORMS AND INSTRUCTIONS FOR

    E-Print Network [OSTI]

    COMMISSION REPORT FORMS AND INSTRUCTIONS FOR ELECTRICITY DEMAND FORECASTS Prepared in Support demand forecasts, demand-side management and energy efficiency impacts, private supply impacts, forecast, peak, self-generation, conservation, demand-side, energy, efficiency, price, retail, end use

  7. MU PURCHASING CARD CARDHOLDER ENROLLMENT / CHANGE FORM

    E-Print Network [OSTI]

    Hardy, Christopher R.

    MU PURCHASING CARD CARDHOLDER ENROLLMENT / CHANGE FORM Action: ( ) Initial Enrollment ( ) Change/WBS/Internal Order # _________________________________________ Office Phone transaction limit Any increase in limits and type of charge (MCC Code) must be approved by the Purchasing

  8. Pulse Pressure Forming of Lightweight Materials, Development...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C. lm015smith2010o.pdf More Documents & Publications Pulse-Pressure Forming of Lightweight Metals...

  9. Contractual form, retail price and asset characteristics

    E-Print Network [OSTI]

    Shepard, Andrea

    1991-01-01T23:59:59.000Z

    Predictions derived from a principal-agent analysis of the manufacturer-retailer relationship are derived and tested using microdata on contractual form, outlet characteristics and retail prices for gasoline stations in ...

  10. MDF Form and Function (Text Version)

    Broader source: Energy.gov [DOE]

    This is a text version of the Manufacturing Demonstration Facilities (MDF) Form and Function video, originally presented on March 12, 2012 at the MDF Workshop held in Chicago, Illinois.

  11. Dry lubricant films for aluminum forming.

    SciTech Connect (OSTI)

    Wei, J.; Erdemir, A.; Fenske, G. R.

    1999-03-30T23:59:59.000Z

    During metal forming process, lubricants are crucial to prevent direct contact, adhesion, transfer and scuffing of workpiece materials and tools. Boric acid films can be firmly adhered to the clean aluminum surfaces by spraying their methanol solutions and provide extremely low friction coefficient (about 0.04). The cohesion strengths of the bonded films vary with the types of aluminum alloys (6061, 6111 and 5754). The sheet metal forming tests indicate that boric acid films and the combined films of boric acid and mineral oil can create larger strains than the commercial liquid and solid lubricants, showing that they possess excellent lubricities for aluminum forming. SEM analyses indicate that boric acid dry films separate the workpiece and die materials, and prevent their direct contact and preserve their surface qualities. Since boric acid is non-toxic and easily removed by water, it can be expected that boric acid films are environmentally friendly, cost effective and very efficient lubricants for sheet aluminum cold forming.

  12. AMS INTERNSHIP PROGRAM Employer Posting Form

    E-Print Network [OSTI]

    Pulfrey, David L.

    AMS INTERNSHIP PROGRAM Employer Posting Form Organization Name WorksafeBC Location 6951 Westminster 604-279-8136 Fax Skills acquired during this internship include Microsoft Excel and/or Microsoft

  13. CC: Security, Residential Life Evacuation Assistance Form

    E-Print Network [OSTI]

    Mahon, Bradford Z.

    CC: Security, Residential Life Evacuation Assistance Form Voluntary Self-Identification If you have will be kept confidential and used only by Environmental Health and Safety, Residential Life (if applicable

  14. Directory of Energy Data Collection Forms: Forms in use as of October 1993

    SciTech Connect (OSTI)

    Not Available

    1993-12-28T23:59:59.000Z

    This is the seventeenth edition of the Directory of Energy Data Collection forms, an authoritative listing of selected public use forms currently used as basic energy information gathering tools by the Department of Energy (DOE). Originally entitled EIA Data Collection forms, this directory provides an overview of DOE`s energy information collection programs for decisionmakers in Government and industry.

  15. Innovative forming and fabrication technologies : new opportunities.

    SciTech Connect (OSTI)

    Davis, B.; Hryn, J.; Energy Systems; Kingston Process Metallurgy, Inc.

    2008-01-31T23:59:59.000Z

    The advent of light metal alloys and advanced materials (polymer, composites, etc.) have brought the possibility of achieving important energy reductions into the full life cycle of these materials, especially in transportation applications. 1 These materials have gained acceptance in the aerospace industry but use of light metal alloys needs to gain wider acceptance in other commercial transportation areas. Among the main reasons for the relatively low use of these materials are the lack of manufacturability, insufficient mechanical properties, and increased material costs due to processing inefficiencies. Considering the enormous potential energy savings associated with the use of light metal alloys and advanced materials in transportation, there is a need to identify R&D opportunities in the fields of materials fabrication and forming aimed at developing materials with high specific mechanical properties combined with energy efficient processes and good manufacturability. This report presents a literature review of the most recent developments in the areas of fabrication and metal forming focusing principally on aluminum alloys. In the first section of the document, the different sheet manufacturing technologies including direct chill (DC) casting and rolling, spray forming, spray rolling, thin slab, and strip casting are reviewed. The second section of the document presents recent research on advanced forming processes. The various forming processes reviewed are: superplastic forming, electromagnetic forming, age forming, warm forming, hydroforming, and incremental forming. Optimization of conventional forming processes is also discussed. Potentially interesting light metal alloys for high structural efficiency including aluminum-scandium, aluminum-lithium, magnesium, titanium, and amorphous metal alloys are also reviewed. This section concludes with a discussion on alloy development for manufacturability. The third section of the document reviews the latest developments in fiber-reinforced composite materials. Emerging curing processes are presented along with a discussion on the possible developments in biocomposite materials. The fourth section presents recent developments in the fabrication of bulk nanomaterials and nanoparticles reinforced materials. Advanced joining technologies are presented in the fifth section. Future research is proposed in the last section.

  16. Method for forming cooperative binary ionic solids

    DOE Patents [OSTI]

    Shelnutt, John A.; Martin, Kathleen E.; Wang, Zhongchun; Medforth, Craig J.

    2014-09-09T23:59:59.000Z

    A nanostructured molecular unit and method for forming is described where a cationic porphyrin having an ethanolic substituent species and a metal in the porphyrin cavity is combined with an anionic porphyrin having a sulfonate substituent species and a metal in the porphyrin cavity to form by self-assembly a nanostructured molecular unit with a morphology comprising four dendritic elements connected at a central node.

  17. Pion form factor with chirally improved fermions

    E-Print Network [OSTI]

    Stefano Capitani; Christof Gattringer; C. B. Lang

    2005-09-12T23:59:59.000Z

    We present results for Monte Carlo calculations of the electromagnetic vector and scalar form factors of the pion in a quenched simulation. We work at a lattice spacing of 0.15 fm and use two lattice volumes up to a spatial size of 2.4 fm. The pion form factors in the space-like region are determined for pion masses down to 340 MeV.

  18. Method for forming cooperative binary ionic solids

    DOE Patents [OSTI]

    Shelnutt, John A.; Martin, Kathleen E.; Wang, Zhongchun; Medforth, Craig J.

    2013-03-05T23:59:59.000Z

    A nanostructured molecular unit and method for forming is described where a cationic porphyrin having an ethanolic substituent species and a metal in the porphyrin cavity is combined with an anionic porphyrin having a sulfonate substituent species and a metal in the porphyrin cavity to form by self-assembly a nanostructured molecular unit with a morphology comprising four dendritic elements connected at a central node.

  19. Method of forming a chemical composition

    DOE Patents [OSTI]

    Bingham, Dennis N. (Idaho Falls, ID); Wilding, Bruce M. (Idaho Falls, ID); Klingler, Kerry M. (Idaho Falls, ID); Zollinger, William T. (Idaho Falls, ID); Wendt, Kraig M. (Idaho Falls, ID)

    2007-10-09T23:59:59.000Z

    A method of forming a chemical composition such as a chemical hydride is described and which includes the steps of selecting a composition having chemical bonds and which is capable of forming a chemical hydride; providing a source of hydrogen; and exposing the selected composition to an amount of ionizing radiation to encourage the changing of the chemical bonds of the selected composition, and chemically reacting the selected composition with the source of hydrogen to facilitate the formation of a chemical hydride.

  20. SEPARATIONS AND WASTE FORMS CAMPAIGN IMPLEMENTATION PLAN

    SciTech Connect (OSTI)

    Vienna, John D.; Todd, Terry A.; Peterson, Mary E.

    2012-11-26T23:59:59.000Z

    This Separations and Waste Forms Campaign Implementation Plan provides summary level detail describing how the Campaign will achieve the objectives set-forth by the Fuel Cycle Reasearch and Development (FCRD) Program. This implementation plan will be maintained as a living document and will be updated as needed in response to changes or progress in separations and waste forms research and the FCRD Program priorities.

  1. Singular Value Decomposition (SVD) and Polar Form

    E-Print Network [OSTI]

    Gallier, Jean

    g always have the same non-zero eigen- values! Furthermore, if E = F, then 0 is an eigenvalue for fChapter 2 Singular Value Decomposition (SVD) and Polar Form 2.1 Polar Form In this chapter, we = f(u), f(v) = u, (f f)(v) . Similarly, f f is self-adjoint. 29 #12;30 CHAPTER 2. SINGULAR VALUE

  2. Process for forming transparent aerogel insulating arrays

    DOE Patents [OSTI]

    Tewari, Param H. (Milpitas, CA); Hunt, Arlon J. (Oakland, CA)

    1986-01-01T23:59:59.000Z

    An improved supercritical drying process for forming transparent silica aerogel arrays is described. The process is of the type utilizing the steps of hydrolyzing and condensing aloxides to form alcogels. A subsequent step removes the alcohol to form aerogels. The improvement includes the additional step, after alcogels are formed, of substituting a solvent, such as CO.sub.2, for the alcohol in the alcogels, the solvent having a critical temperature less than the critical temperature of the alcohol. The resulting gels are dried at a supercritical temperature for the selected solvent, such as CO.sub.2, to thereby provide a transparent aerogel array within a substantially reduced (days-to-hours) time period. The supercritical drying occurs at about 40.degree. C. instead of at about 270.degree. C. The improved process provides increased yields of large scale, structurally sound arrays. The transparent aerogel array, formed in sheets or slabs, as made in accordance with the improved process, can replace the air gap within a double glazed window, for example, to provide a substantial reduction in heat transfer. The thus formed transparent aerogel arrays may also be utilized, for example, in windows of refrigerators and ovens, or in the walls and doors thereof or as the active material in detectors for analyzing high energy elementry particles or cosmic rays.

  3. Process for forming transparent aerogel insulating arrays

    DOE Patents [OSTI]

    Tewari, P.H.; Hunt, A.J.

    1985-09-04T23:59:59.000Z

    An improved supercritical drying process for forming transparent silica aerogel arrays is described. The process is of the type utilizing the steps of hydrolyzing and condensing aloxides to form alcogels. A subsequent step removes the alcohol to form aerogels. The improvement includes the additional step, after alcogels are formed, of substituting a solvent, such as CO/sub 2/, for the alcohol in the alcogels, the solvent having a critical temperature less than the critical temperature of the alcohol. The resulting gels are dried at a supercritical temperature for the selected solvent, such as CO/sub 2/, to thereby provide a transparent aerogel array within a substantially reduced (days-to-hours) time period. The supercritical drying occurs at about 40/sup 0/C instead of at about 270/sup 0/C. The improved process provides increased yields of large scale, structurally sound arrays. The transparent aerogel array, formed in sheets or slabs, as made in accordance with the improved process, can replace the air gap within a double glazed window, for example, to provide a substantial reduction in heat transfer. The thus formed transparent aerogel arrays may also be utilized, for example, in windows of refrigerators and ovens, or in the walls and doors thereof or as the active material in detectors for analyzing high energy elementary particles or cosmic rays.

  4. Development of Alternative Technetium Waste Forms

    SciTech Connect (OSTI)

    Czerwinski, Kenneth

    2013-09-13T23:59:59.000Z

    The UREX+1 process is under consideration for the separation of transuranic elements from spent nuclear fuel. The first steps of this process extract the fission product technicium-99 ({sup 99}Tc) into an organic phase containing tributylphosphate together with uranium. Treatment of this stream requires the separation of Tc from U and placement into a suitable waste storage form. A potential candidate waste form involves immobilizing the Tc as an alloy with either excess metallic zirconium or stainless steel. Although Tc-Zr alloys seem to be promising waste forms, alternative materials must be investigated. Innovative studies related to the synthesis and behavior of a different class of Tc materials will increase the scientific knowledge related to development of Tc waste forms. These studies will also provide a better understanding of the behavior of {sup 99}Tc in repository conditions. A literature survey has selected promising alternative waste forms for further study: technetium metallic alloys, nitrides, oxides, sulfides, and pertechnetate salts. The goals of this project are to 1) synthesize and structurally characterize relevant technetium materials that may be considered as waste forms, 2) investigate material behavior in solution under different conditions of temperature, electrochemical potential, and radiation, and 3) predict the long-term behavior of these materials.

  5. Radionuclide Retention in Concrete Waste Forms

    SciTech Connect (OSTI)

    Mattigod, Shas V.; Bovaird, Chase C.; Wellman, Dawn M.; Wood, Marcus I.

    2010-09-30T23:59:59.000Z

    Assessing long-term performance of Category 3 waste cement grouts for radionuclide encasement requires knowledge of the radionuclide-cement interactions and mechanisms of retention (i.e., sorption or precipitation); the mechanism of contaminant release; the significance of contaminant release pathways; how waste form performance is affected by the full range of environmental conditions within the disposal facility; the process of waste form aging under conditions that are representative of processes occurring in response to changing environmental conditions within the disposal facility; the effect of waste form aging on chemical, physical, and radiological properties; and the associated impact on contaminant release. This knowledge will enable accurate prediction of radionuclide fate when the waste forms come in contact with groundwater. The information presented in the report provides data that 1) quantify radionuclide retention within concrete waste form materials similar to those used to encapsulate waste in the Low-Level Waste Burial Grounds (LLBG); 2) measure the effect of concrete waste form properties likely to influence radionuclide migration; and 3) quantify the stability of uranium-bearing solid phases of limited solubility in concrete.

  6. Method of forming aluminum oxynitride material and bodies formed by such methods

    DOE Patents [OSTI]

    Bakas, Michael P. (Ammon, ID) [Ammon, ID; Lillo, Thomas M. (Idaho Falls, ID) [Idaho Falls, ID; Chu, Henry S. (Idaho Falls, ID) [Idaho Falls, ID

    2010-11-16T23:59:59.000Z

    Methods of forming aluminum oxynitride (AlON) materials include sintering green bodies comprising aluminum orthophosphate or another sacrificial material therein. Such green bodies may comprise aluminum, oxygen, and nitrogen in addition to the aluminum orthophosphate. For example, the green bodies may include a mixture of aluminum oxide, aluminum nitride, and aluminum orthophosphate or another sacrificial material. Additional methods of forming aluminum oxynitride (AlON) materials include sintering a green body including a sacrificial material therein, using the sacrificial material to form pores in the green body during sintering, and infiltrating the pores formed in the green body with a liquid infiltrant during sintering. Bodies are formed using such methods.

  7. Lobbyist Disclosure Form - Silicon Valley | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lobbyist Disclosure Form - Silicon Valley.pdf More Documents & Publications Lobbyist Disclosure Form - AltEn Lobbyist Disclosure Form - First Solar Interested Parties - Shipp...

  8. Directory of energy data collection forms. Forms in use as of October 1995

    SciTech Connect (OSTI)

    NONE

    1996-01-01T23:59:59.000Z

    This is an authoritative listing of selected public use forms currently used as basic energy information gathering tools by the Department of Energy (DOE). This directory provides an overview of DOE`s energy information collection programs for decisionmakers in Government and industry. Forms designed to collect energy information and used by the Energy Information Administration (EIA) as of October 1995 are included in this directory. For each form listed in this directory, an abstract is included that describes the form`s uses, its respondents, and the data collected. For the reader`s convenience in finding specific types of collections, several indices have been provided in this directory. A listing of the forms grouped by energy source and function begins on page 26. Beginning on page 38 are the publications derived from the collections, and on page 50, are the forms linked to general respondent categories.

  9. DWPF waste form compliance plan (Draft Revision)

    SciTech Connect (OSTI)

    Plodinec, M.J.; Marra, S.L.

    1991-12-31T23:59:59.000Z

    The Department of Energy currently has over 100 million liters of high-level radioactive waste in storage at the Savannah River Site (SRS). In the late 1970`s, the Department of Energy recognized that there were significant safety and cost advantages associated with immobilizing the high-level waste in a stable solid form. Several alternative waste forms were evaluated in terms of product quality and reliability of fabrication. This evaluation led to a decision to build the Defense Waste Processing Facility (DWPF) at SRS to convert the easily dispersed liquid waste to borosilicate glass. In accordance with the NEPA (National Environmental Policy Act) process, an Environmental Impact Statement was prepared for the facility, as well as an Environmental Assessment of the alternative waste forms, and issuance of a Record of Decision (in December, 1982) on the waste form. The Department of Energy, recognizing that start-up of the DWPF would considerably precede licensing of a repository, instituted a Waste Acceptance Process to ensure that these canistered waste forms would be acceptable for eventual disposal at a federal repository. This report is a revision of the DWPF compliance plan.

  10. DWPF waste form compliance plan (Draft Revision)

    SciTech Connect (OSTI)

    Plodinec, M.J.; Marra, S.L.

    1991-01-01T23:59:59.000Z

    The Department of Energy currently has over 100 million liters of high-level radioactive waste in storage at the Savannah River Site (SRS). In the late 1970's, the Department of Energy recognized that there were significant safety and cost advantages associated with immobilizing the high-level waste in a stable solid form. Several alternative waste forms were evaluated in terms of product quality and reliability of fabrication. This evaluation led to a decision to build the Defense Waste Processing Facility (DWPF) at SRS to convert the easily dispersed liquid waste to borosilicate glass. In accordance with the NEPA (National Environmental Policy Act) process, an Environmental Impact Statement was prepared for the facility, as well as an Environmental Assessment of the alternative waste forms, and issuance of a Record of Decision (in December, 1982) on the waste form. The Department of Energy, recognizing that start-up of the DWPF would considerably precede licensing of a repository, instituted a Waste Acceptance Process to ensure that these canistered waste forms would be acceptable for eventual disposal at a federal repository. This report is a revision of the DWPF compliance plan.

  11. Formed Core Sampler Hydraulic Conductivity Testing

    SciTech Connect (OSTI)

    Miller, D. H.; Reigel, M. M.

    2012-09-25T23:59:59.000Z

    A full-scale formed core sampler was designed and functionally tested for use in the Saltstone Disposal Facility (SDF). Savannah River National Laboratory (SRNL) was requested to compare properties of the formed core samples and core drilled samples taken from adjacent areas in the full-scale sampler. While several physical properties were evaluated, the primary property of interest was hydraulic conductivity. Differences in hydraulic conductivity between the samples from the formed core sampler and those representing the bulk material were noted with respect to the initial handling and storage of the samples. Due to testing conditions, the site port samples were exposed to uncontrolled temperature and humidity conditions prior to testing whereas the formed core samples were kept in sealed containers with minimal exposure to an uncontrolled environment prior to testing. Based on the results of the testing, no significant differences in porosity or density were found between the formed core samples and those representing the bulk material in the test stand.

  12. Recent INEL spray-forming developments

    SciTech Connect (OSTI)

    McHugh, K.M.; Key, J.F.

    1992-12-31T23:59:59.000Z

    Spray forming is a near-net-shape fabrication technology in which a spray of finely atomized liquid droplets is deposited onto a suitably shaped substrate or mold to produce a coherent solid. The technology offers unique opportunities for simplifying materials processing, oftentimes while substantially improving product quality. Spray forming can be performed with a wide range of metals and nonmetals, and offersproperty improvements resulting from rapid solidification (eg. refined microstructures, extended solid solubilities and reduced segregation). Economic benefits result from process simplification and the elimination of unit operations. Researchers at the Idaho National Engineering Laboratory (INEL) are developing spray-forming technology for producing near-net-shape solids and coatings of a variety of metals, polymers, and composite materials using de Laval nozzles. Results from several spray-forming programs are presented to illustrate the range of capabilities of the approach as well as the technical and economic benefits. These programs involved the production of low-carbon steel strip and SiC particulate reinforced aluminum strip; recent advances in spray forming tooling using low-melting-point metals are also described.

  13. The Form Factors of the Nucleons

    SciTech Connect (OSTI)

    Perdrisat, Charles F. [William and Mary College, JLAB

    2013-11-01T23:59:59.000Z

    There has been much activity in the measurement of the elastic electromagnetic proton and neutron form factors in the last decade, and the quality of the data has been greatly improved by performing double-polarization experiments, in comparison with with pre-vious unpolarized cross section data. Here we will review the experimental data base in view of the new results for the proton and the neutron, obtained at MIT-Bates, JLab and MAMI. The rapid evolution of phenomenological models triggered by these high- precision experiments will be discussed. In particular, the possibility that the proton is non-spherical in its ground state, and that the transverse charge density are model in- dependently defined in the infinite momentum frame. Likewise, flavor decomposition of the nucleon form factors into dressed u and d quark form factors, may give information about the quark-diquark structure of the nucleon. The current proton radius "crisis" will also be discussed.

  14. Density of Spray-Formed Materials

    SciTech Connect (OSTI)

    Kevin M. McHugh; Volker Uhlenwinkel; Nils Ellendr

    2008-06-01T23:59:59.000Z

    Spray Forming is an advanced materials processing technology that transforms molten metal into a near-net-shape solid by depositing atomized droplets onto a substrate. Depending on the application, the spray-formed material may be used in the as-deposited condition or it may undergo post-deposition processing. Regardless, the density of the as-deposited material is an important issue. Porosity is detrimental because it can significantly reduce strength, toughness, hardness and other properties. While it is not feasible to achieve fully-dense material in the as-deposited state, density greater than 99% of theoretical density is possible if the atomization and impact conditions are optimized. Thermal conditions at the deposit surface and droplet impact angle are key processing parameters that influence the density of the material. This paper examines the factors that contribute to porosity formation during spray forming and illustrates that very high as-deposited density is achieved by optimizing processing parameters.

  15. Oligomer functionalized nanotubes and composites formed therewith

    DOE Patents [OSTI]

    Zettl, Alexander K; Sainsbury, Toby; Frechet, Jean M.J.

    2014-03-18T23:59:59.000Z

    Disclosed herein is a sequential functionalization methodology for the covalent modification of nanotubes with between one and four repeat units of a polymer. Covalent attachment of oligomer units to the surface of nanotubes results in oligomer units forming an organic sheath around the nanotubes, polymer-functionalized-nanotubes (P-NTs). P-NTs possess chemical functionality identical to that of the functionalizing polymer, and thus provide nanoscale scaffolds which may be readily dispersed within a monomer solution and participate in the polymerization reaction to form a polymer-nanotube/polymer composite. Formation of polymer in the presence of P-NTs leads to a uniform dispersion of nanotubes within the polymer matrix, in contrast to aggregated masses of nanotubes in the case of pristine-NTs. The covalent attachment of oligomeric units to the surface of nanotubes represents the formation of a functional nanoscale building block which can be readily dispersed and integrated within the polymer to form a novel composite material.

  16. Forming aspheric optics by controlled deposition

    DOE Patents [OSTI]

    Hawryluk, Andrew M. (Modesto, CA)

    1998-01-01T23:59:59.000Z

    An aspheric optical element formed by depositing material onto a spherical surface of an optical element by controlled deposition to form an aspheric surface of desired shape. A reflecting surface, single or multi-layer, can then be formed on the aspheric surface by evaporative or sputtering techniques. Aspheric optical elements are suitable for deep ultra-violet (UV) and x-ray wavelengths. The reflecting surface may, for example, be a thin (.about.100 nm) layer of aluminum, or in some cases the deposited modifying layer may function as the reflecting surface. For certain applications, multi-layer reflective surfaces may be utilized, such as chromium-carbon or tungsten-carbon multi-layer, with the number of layers and thickness being determined by the intended application.

  17. The Alternative Form of Fermat's Equation

    E-Print Network [OSTI]

    Anatoly A. Grinberg

    2014-09-25T23:59:59.000Z

    An alternative form of Fermats equation[1] is proposed. It represents a portion of the identity that includes three terms of Fermats original equation. This alternative form permits an elementary and compact proof of the first case of Fermats Theorem (FT) for a number of specific exponents. Proofs are given for exponents n equal to 3, 5, 7,11 and 13. All these cases have already been proven using the original Fermats equation, not to mention the fact that a complete proof of FT was given by A. Wiles [2]. In view of this, the results presented here carry a purely methodological interest. They illustrate the effectiveness and simplicity of the method,compared with the well-known classical approach. An alternative form of the equation permits use of the criterion of the incompatibility of its terms, avoiding the labor-intensive and sophisticated calculations associated with traditional approach.

  18. Method of forming an HTS article

    DOE Patents [OSTI]

    Bhattacharya, Raghu N.; Zhang, Xun; Selvamanickam, Venkat

    2014-08-19T23:59:59.000Z

    A method of forming a superconducting article includes providing a substrate tape, forming a superconducting layer overlying the substrate tape, and depositing a capping layer overlying the superconducting layer. The capping layer includes a noble metal and has a thickness not greater than about 1.0 micron. The method further includes electrodepositing a stabilizer layer overlying the capping layer using a solution that is non-reactive to the superconducting layer. The superconducting layer has an as-formed critical current I.sub.C(AF) and a post-stabilized critical current I.sub.C(PS). The I.sub.C(PS) is at least about 95% of the I.sub.C(AF).

  19. Mixed low-level waste form evaluation

    SciTech Connect (OSTI)

    Pohl, P.I.; Cheng, Wu-Ching; Wheeler, T.; Waters, R.D.

    1997-03-01T23:59:59.000Z

    A scoping level evaluation of polyethylene encapsulation and vitreous waste forms for safe storage of mixed low-level waste was performed. Maximum permissible radionuclide concentrations were estimated for 15 indicator radionuclides disposed of at the Hanford and Savannah River sites with respect to protection of the groundwater and inadvertent intruder pathways. Nominal performance improvements of polyethylene and glass waste forms relative to grout are reported. These improvements in maximum permissible radionuclide concentrations depend strongly on the radionuclide of concern and pathway. Recommendations for future research include improving the current understanding of the performance of polymer waste forms, particularly macroencapsulation. To provide context to these estimates, the concentrations of radionuclides in treated DOE waste should be compared with the results of this study to determine required performance.

  20. BNL Rideshare Registration Form Your Name: _______________________ Life No.: ________

    E-Print Network [OSTI]

    Homes, Christopher C.

    : _______________ BNL ETC Signature: _____________________ Date: _______________ Return form to Jeff Williams

  1. Lorentz Coherence and the Proton Form Factor

    E-Print Network [OSTI]

    Kim, Young S

    2015-01-01T23:59:59.000Z

    The dipole cutoff behavior for the proton form factor has been and still is one of the major issues in high-energy physics. It is shown that this dipole behavior comes from the coherence between the Lorentz contraction of the proton size and the decreasing wavelength of the incoming photon signal. The contraction rates are the same for both cases. This form of coherence is studied also in the momentum-energy space. The coherence effect in this space can be explained in terms of two overlapping wave functions.

  2. Forms and Handouts Template | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsing ZirconiaPolicyFeasibilityFieldMinds" Give Forms (All forms are in

  3. Research Form | Photosynthetic Antenna Research Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298,NIST31 ORVEnergyResearch Form Research Form

  4. Forms | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickr Flickr Editor's note: SincePlant Name: (MM))PublicationsFormsForms

  5. High temperature methods for forming oxidizer fuel

    DOE Patents [OSTI]

    Bravo, Jose Luis (Houston, TX)

    2011-01-11T23:59:59.000Z

    A method of treating a formation fluid includes providing formation fluid from a subsurface in situ heat treatment process. The formation fluid is separated to produce a liquid stream and a first gas stream. The first gas stream includes carbon dioxide, hydrogen sulfide, hydrocarbons, hydrogen or mixtures thereof. Molecular oxygen is separated from air to form a molecular oxygen stream comprising molecular oxygen. The first gas stream is combined with the molecular oxygen stream to form a combined stream comprising molecular oxygen and the first gas stream. The combined stream is provided to one or more downhole burners.

  6. Revised October 2012 MERCURY CONTAINING EQUIPMENT REGISTRATION FORM

    E-Print Network [OSTI]

    Jia, Songtao

    Sphygmomanometer U-Shaped Manometer Other (please specify): How to return this form: Please send this form

  7. When Function Follows Form: Plastic Solar Cells | ANSER Center...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    When Function Follows Form: Plastic Solar Cells Home > Research > ANSER Research Highlights > When Function Follows Form: Plastic Solar Cells...

  8. Directory of energy data collection forms: Forms in use as of October 1994

    SciTech Connect (OSTI)

    Not Available

    1994-12-15T23:59:59.000Z

    This 18th edition directory provides an overview of DOE`s energy information collection programs for decisionmakers in Government and industry; selected public use forms currently used as basic energy information gathering tools by DOE are covered. For each form, an abstract is included that describes the form`s uses, its respondents, and the data collected. Also shown are frequently requested items: energy sources and functions covered by the form, general categories of respondents, collection frequency, public laws and regulations, reporting requirement, name and phone number of the data collection manager, and the publications resulting from the data collection. Indexes, arranged according to energy source/function, publications, respondent categories, former EIA form number designations, and collection authorities, are provided.

  9. Electronic forms solutions To support your business objectives

    E-Print Network [OSTI]

    Electronic forms solutions To support your business objectives Easily integrate your offline forms are using electronic forms instead of paper, so that their existing forms are always in stock, easy to locate and have a consistent look and feel. IBM® Lotus® Forms software provides an open electronic forms

  10. Hypersonic Molecular Shocks in Star Forming Regions

    E-Print Network [OSTI]

    Brand, P W J L

    2006-01-01T23:59:59.000Z

    Much emission from star forming regions is from shock-excited gas. Shocks in molecular clouds are still not fully understood, as magnetic fields, dust and chemistry all play significant roles. I review the history, physics and current work in understanding these shocks, and in their possible use as diagnostics of local conditions.

  11. Hypersonic Molecular Shocks in Star Forming Regions

    E-Print Network [OSTI]

    Peter W. J. L. Brand

    2006-09-08T23:59:59.000Z

    Much emission from star forming regions is from shock-excited gas. Shocks in molecular clouds are still not fully understood, as magnetic fields, dust and chemistry all play significant roles. I review the history, physics and current work in understanding these shocks, and in their possible use as diagnostics of local conditions.

  12. PROJECT REQUEST FORM PROJECT HOLDER INFORMATION

    E-Print Network [OSTI]

    de Leon, Alex R.

    PROJECT REQUEST FORM Last Name: Email: PROJECT HOLDER INFORMATION UCID:Last Name: Email: Institute if different than Project Holder) First Name: Project Short Name: (50 characters max) (for eFIN view only) Project Title: PROJECT INFORMATION Start Date (MM/DD/YYYY): End Date (MM/DD/YYYY): For Questions or HELP

  13. Methods for forming wellbores in heated formations

    DOE Patents [OSTI]

    Guimerans, Rosalvina Ramona; Mansure, Arthur James

    2012-09-25T23:59:59.000Z

    A method for forming a wellbore in a heated formation includes flowing liquid cooling fluid to a bottom hole assembly in a wellbore in a heated formation. At least a portion of the liquid cooling fluid is vaporized at or near a region to be cooled. Vaporizing the liquid cooling fluid absorbs heat from the region to be cooled.

  14. NIST ITL submits PINS form to ANSI

    E-Print Network [OSTI]

    1 NIST ITL submits PINS form to ANSI for initiation of project to draft new or revised ANS. ANSI consensus body, starting with pre- canvass notice and invitation, which is posted on the ANSI/ NIST and develops canvass list. NIST ITL issues 45-day ballot and submits to ANSI for concurrent 45- day public

  15. Student Intern Evaluation Form Geography 484

    E-Print Network [OSTI]

    Student Intern Evaluation Form Geography 484 Student Intern Name: Student Intern Position: Name poor, 5 being proficient and, 10 being exceeds expectations, please rate the Student Intern reliable would you consider this student? 1 2 3 4 5 6 7 8 9 10 3. How well did the student comply

  16. American Studies Graduate Program Advisor Form

    E-Print Network [OSTI]

    Dyer, Bill

    American Studies Graduate Program Advisor Form Thank you for your interest in the American Studies must first secure an advisor in order to be considered for admission. The first-year advisor can, American Studies is not in a position to assign faculty to serve as advisors. It is, therefore

  17. FACULTY OF ENGINEERING MODULE DESCRIPTION FORM

    E-Print Network [OSTI]

    Mottram, Nigel

    FACULTY OF ENGINEERING MODULE DESCRIPTION FORM CODE CL508/906 Site Investigation & Risk Assessment-86017-578-2 CIRIA C557 Remedial engineering for closed landfill sites D L Barry, I M Summersgill, R G Gregory et al Module Registrar: Dr P Sentenac Taught To (Course): Civil Engineering Other Lecturers Involved: Credit

  18. Manifold free multiple sheet superplastic forming

    DOE Patents [OSTI]

    Elmer, John W. (Danville, CA); Bridges, Robert L. (Knoxville, TN)

    2001-01-01T23:59:59.000Z

    Fluid-forming compositions in a container attached to enclosed adjacent sheets are heated to relatively high temperatures to generate fluids (gases) that effect inflation of the sheets. Fluid rates to the enclosed space between the sheets can be regulated by the canal from the container. Inflated articles can be produced by a continuous, rather than batch-type, process.

  19. Sustainable Energy Revolving Loan Fund CLOSEOUT FORM

    E-Print Network [OSTI]

    Escher, Christine

    Sustainable Energy Revolving Loan Fund CLOSEOUT FORM I. Project Information 1. Project Title 2. By signing Section V below, the OSU Student Sustainability Initiative accepts the Applicant's assertion No Other funding sources. Provide source name, fund, or index number. Exclude possible Energy Trust

  20. Form drag at Three Tree Point

    E-Print Network [OSTI]

    Warner, Sally

    form drag with bottom pressure sensors #12;Oscillatory dynamics tidal energy converted to internal waves, eddies and mixing no tidally averaged work done on system slack tide: background tilt flood & ebb Puget Sound, WA Point Three Tree Pressure sensors (PPODs) at Three Tree Point (TTP) PPODs #12;PPOD

  1. Free-Form Motion Processing Scott Kircher

    E-Print Network [OSTI]

    Garland, Michael

    Free-Form Motion Processing Scott Kircher University of Illinois at Urbana-Champaign and Michael Descriptors: I.3.7 [Computer Graphics]: Three-Dimensional Graphics and Realism--Animation General Terms are typical of several common motion sources, including physical simulations of non-rigid objects (e.g., cloth

  2. STUDENTS CROSSING BORDERS (SCB) COMMUNITY APPLICATION FORM

    E-Print Network [OSTI]

    Blanchette, Robert A.

    STUDENTS CROSSING BORDERS (SCB) COMMUNITY APPLICATION FORM The Students Crossing Borders community of Minnesota. This document is a supplemental application for the SCB community only. Current U of M Housing this application to: scb@umn.edu or Students Crossing Borders c/o Kevin Dostal Dauer Comstock Hall East 210

  3. Form ElectApp11 ELECTRICAL APPLIANCES

    E-Print Network [OSTI]

    Applebaum, David

    Form ElectApp11 ELECTRICAL APPLIANCES In accordance with Residence Regulation 14.2 (see Section Two. Permission to bring personal electrical items will not be unreasonably withheld, but will not be granted amplifiers electrical heaters cooking equipment such as deep fat fryers. (Please note that permitted cooking

  4. Form ElectApp13 ELECTRICAL APPLIANCES

    E-Print Network [OSTI]

    Applebaum, David

    Form ElectApp13 ELECTRICAL APPLIANCES In accordance with the Agreement Terms and Conditions clause to the Residence. Permission to bring personal electrical items will not be unreasonably withheld systems amplifiers electrical heaters cooking equipment such as deep fat fryers. (Please note

  5. Form ElectApp12 ELECTRICAL APPLIANCES

    E-Print Network [OSTI]

    Applebaum, David

    Form ElectApp12 ELECTRICAL APPLIANCES In accordance with Residence Regulation 15.2 (see Section Two. Permission to bring personal electrical items will not be unreasonably withheld, but will not be granted · amplifiers · electrical heaters · cooking equipment such as deep fat fryers. (Please note that permitted

  6. The Library UBC LIBRARY CARD APPLICATION FORM

    E-Print Network [OSTI]

    Michelson, David G.

    The Library UBC LIBRARY CARD APPLICATION FORM For Faculty Authorized Users UBC FACULTY MEMBER to the following person so that s/he may borrow Library materials and access services in my name for my UBC September 15th , 2014 Faculty member's statement: I understand that this is a separate library card from my

  7. PRIOR LEARNING ASSESSMENT (PLA) Application Form

    E-Print Network [OSTI]

    Sokolowski, Marla

    PRIOR LEARNING ASSESSMENT (PLA) Application Form Advanced standing may be granted to certificate the SCS Courses for which you are seeking advanced standing. SCS Course Number Course Title PLA Basis A and/or B PLA Fee _ HST 13% Please state below the certificate program you are working towards

  8. Manifold free multiple sheet superplastic forming

    DOE Patents [OSTI]

    Elmer, John W.; Bridges, Robert L.

    2004-01-13T23:59:59.000Z

    Fluid-forming compositions in a container attached to enclosed adjacent sheets are heated to relatively high temperatures to generate fluids (gases) that effect inflation of the sheets. Fluid rates to the enclosed space between the sheets can be regulated by the canal from the container. Inflated articles can be produced by a continuous, rather than batch-type, process.

  9. FIRE WATCH FORM University Fire Marshal

    E-Print Network [OSTI]

    Pawlowski, Wojtek

    FIRE WATCH FORM University Fire Marshal Guidance Document Approved by: R. Flynn Last revised by: R. These are regulations used by the University Fire Marshal and EH&S as guidance to meet compliance pertaining the impairment coordinator (The University Fire Marshal has been identified as the Impairment Coordinator for all

  10. Laser Worker Registration Form (LWRF) Surname: Forenames

    E-Print Network [OSTI]

    Martin, Ralph R.

    ABCDEFGHI Laser Worker Registration Form (LWRF) Surname: Forenames: School of: Ext No.: Email YY Class of Laser to be Used 1 1M 1E 2 2M 3R 3B 4 Work Location(s) Lab No. Laser Work Currently Undertaken Elsewhere Are you currently engaged in work elsewhere involving laser radiation? YES

  11. AMS INTERNSHIP PROGRAM Employer Posting Form

    E-Print Network [OSTI]

    Pulfrey, David L.

    AMS INTERNSHIP PROGRAM Employer Posting Form Organization Name Reframe Marketing Inc. Location on an Internship basis. Because we are a smaller company, you will get to learn lots since you are expected to fill · not guaranteed a job at the end of the internship · flexibility of working from home If you are interested

  12. AMS INTERNSHIP PROGRAM Employer Posting Form

    E-Print Network [OSTI]

    Pulfrey, David L.

    AMS INTERNSHIP PROGRAM Employer Posting Form Organization Name Star Solutions International internship. The Visual Communication/ Marketing Intern will use their skills and knowledge to create, produce. Completion of this project will be the main focus of the internship. SKILLS REQUIRED AND/OR RECOMMENDED Must

  13. AMS INTERNSHIP PROGRAM Employer Posting Form

    E-Print Network [OSTI]

    Pulfrey, David L.

    AMS INTERNSHIP PROGRAM Employer Posting Form Organization Name Star Solutions International for 2 - 3 high-energy, resourceful individuals for a 10-12 week internship. This is an entry-level internship in marketing and sales. This position will be working with senior marketing and sales executives

  14. CC: Security, Residential Life Evacuation Assistance Form

    E-Print Network [OSTI]

    Cantlon, Jessica F.

    CC: Security, Residential Life Evacuation Assistance Form Voluntary Self-Identification If you have will be kept confidential and used only by Environmental Health and Safety, Residential Life (if applicable:_______________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ #12;CC: Security, Residential Life If this is a temporary request, please provide a date when

  15. Asset Management Equipment Disposal Form -Refrigerant Recovery

    E-Print Network [OSTI]

    Sin, Peter

    enters the waste stream with the charge intact (e.g., motor vehicle air conditioners, refrigeratorsAsset Management Equipment Disposal Form - Refrigerant Recovery Safe Disposal Requirements Under refrigeration, cold storage warehouse refrigeration, chillers, and industrial process refrigeration) has to have

  16. The first stars: Where did they form?

    E-Print Network [OSTI]

    Jordi Miralda-Escude

    1999-12-15T23:59:59.000Z

    Several emerging links between high-redshift observational cosmology and the Galactic fossil evidence found in the kinematics, metallicities and ages of Milky Way stars are discussed. In a flat Cold Dark Matter model with $\\Omega\\simeq 0.3$ that agrees with present large-scale structure observations, the oldest stars in the Milky Way should have formed in the first halos where gas was able to cool, at $z\\simeq 20$. These earliest, weakly bound dwarf galaxies probably turned only a small fraction of their gas to stars, which should be metal-poor. However, the merging rate in the early universe was much faster than the present one, so massive halos with more efficient star formation and metallicities up to the highest values present today in the bulge could have formed less than $10^9$ years after the oldest stars. The mean metallicity produced in the universe by a given redshift is related to the mean surface brightness of star-forming galaxies above this redshift, and also to the reionization epoch if galaxies were the dominant sources of ionizing radiation. The biased distribution of the early dwarf galaxies where the first stars formed should result in an age gradient with radius of the low-metallicity stars in the Milky Way, with the oldest ones concentrated in the bulge and the youngest in the outer halo.

  17. REPLACEMENT DIPLOMA REQUEST FORM Dear Alumni

    E-Print Network [OSTI]

    Dennett, Daniel

    REPLACEMENT DIPLOMA REQUEST FORM Dear Alumni: It is our understanding that you need to replace your original diploma. We are glad to help you attain a replacement diploma. The items listed below are required replacement diploma. Please feel free to contact the LGBT Center at 617-627-3770 if you have questions

  18. Combined Waste Form Cost Trade Study

    SciTech Connect (OSTI)

    Dirk Gombert; Steve Piet; Timothy Trickel; Joe Carter; John Vienna; Bill Ebert; Gretchen Matthern

    2008-11-01T23:59:59.000Z

    A new generation of aqueous nuclear fuel reprocessing, now in development under the auspices of the DOE Office of Nuclear Energy (NE), separates fuel into several fractions, thereby partitioning the wastes into groups of common chemistry. This technology advance enables development of waste management strategies that were not conceivable with simple PUREX reprocessing. Conventional wisdom suggests minimizing high level waste (HLW) volume is desirable, but logical extrapolation of this concept suggests that at some point the cost of reducing volume further will reach a point of diminishing return and may cease to be cost-effective. This report summarizes an evaluation considering three groupings of wastes in terms of cost-benefit for the reprocessing system. Internationally, the typical waste form for HLW from the PUREX process is borosilicate glass containing waste elements as oxides. Unfortunately several fission products (primarily Mo and the noble metals Ru, Rh, Pd) have limited solubility in glass, yielding relatively low waste loading, producing more glass, and greater disposal costs. Advanced separations allow matching the waste form to waste stream chemistry, allowing the disposal system to achieve more optimum waste loading with improved performance. Metals can be segregated from oxides and each can be stabilized in forms to minimize the HLW volume for repository disposal. Thus, a more efficient waste management system making the most effective use of advanced waste forms and disposal design for each waste is enabled by advanced separations and how the waste streams are combined. This trade-study was designed to juxtapose a combined waste form baseline waste treatment scheme with two options and to evaluate the cost-benefit using available data from the conceptual design studies supported by DOE-NE.

  19. Nucleon and $?$ elastic and transition form factors

    E-Print Network [OSTI]

    Jorge Segovia; Ian C. Cloet; Craig D. Roberts; Sebastian M. Schmidt

    2014-09-03T23:59:59.000Z

    We compute nucleon and Delta elastic and transition form factors, and compare predictions made using a framework built upon a Faddeev equation kernel and interaction vertices that possess QCD-like momentum dependence with results obtained using a vector-vector contact-interaction. The comparison emphasises that experiment is sensitive to the momentum dependence of the running couplings and masses in the strong interaction sector of the Standard Model and highlights that the key to describing hadron properties is a veracious expression of dynamical chiral symmetry breaking in the bound-state problem. Amongst the results we describe, the following are of particular interest: $G_E^p(Q^2)/G_M^p(Q^2)$ possesses a zero at $Q^2=9.5GeV^2$; any change in the interaction which shifts a zero in the proton ratio to larger $Q^2$ relocates a zero in $G_E^n(Q^2)/G_M^n(Q^2)$ to smaller $Q^2$; and there is likely a value of momentum transfer above which $G_E^n>G_E^p$. Regarding the $\\Delta(1232)$-baryon, we find that, inter alia: the electric monopole form factor exhibits a zero; the electric quadrupole form factor is negative, large in magnitude, and sensitive to the nature and strength of correlations in the $\\Delta(1232)$ Faddeev amplitude; and the magnetic octupole form factor is negative so long as rest-frame P- and D-wave correlations are included. In connection with the N-to-Delta transition, the momentum-dependence of the magnetic transition form factor, $G_M^\\ast$, matches that of $G_M^n$ once the momentum transfer is high enough to pierce the meson-cloud; and the electric quadrupole ratio is a keen measure of diquark and orbital angular momentum correlations.

  20. TERMINATION FORM Send complete, signed form to your Human Resources Services Area Office

    E-Print Network [OSTI]

    Haykin, Simon

    TERMINATION FORM Send complete, signed form to your Human Resources Services Area Office HR/ REV1.8/2007/12/11 A EMPLOYEE INFORMATION Employee ID First Name & Initial(s) Surname Effective Date of Termination (dd for Current Benefit Year Reason for Termination Comments B AUTHORIZATION Department Ext. Name Signature Date

  1. OPPENHEIM CONJECTURE FOR PAIRS CONSISTING OF A LINEAR FORM AND A QUADRATIC FORM

    E-Print Network [OSTI]

    Gorodnik, Alexander

    OPPENHEIM CONJECTURE FOR PAIRS CONSISTING OF A LINEAR FORM AND A QUADRATIC FORM ALEXANDER GORODNIK. As a generalization of the Oppenheim conjecture, we prove that the set {(Q(x), L(x)) : x Zd } is dense in R2 provided of author's PhD thesis at Ohio State University done under supervision of Prof. Bergelson. 1 #12;OPPENHEIM

  2. Form-1 2013, Page 1 Form1: Summary of Grant Project

    E-Print Network [OSTI]

    Sheridan, Jennifer

    Form-1 2013, Page 1 Form1: Summary of Grant Project (Due 1 month after the Grant End Date) 1. Grant to continue our funding; our funds are contingent from year to year. 7. Describe the Project (can be taken from grant application unless there were major changes to project activities during implementation). 8

  3. ADVISOR CODE RELEASE FORM Please return completed form to: Office of Instruction & Student Affairs

    E-Print Network [OSTI]

    Wildermuth, Mary C

    ADVISOR CODE RELEASE FORM Please return completed form to: Office of Instruction & Student Affairs in classes each semester, you will need: 1) your Personal Identification Number (PIN), and 2) your advisor code. During your undergraduate career at UC Berkeley, you will keep the same PIN, but your advisor

  4. Text Extraction from HandwrittenText Extraction from Handwritten Medical Form ImagesMedical Form Images

    E-Print Network [OSTI]

    Govindaraju, Venu

    Heterogeneous data 6,700 carbon forms stored at 300 DPI 1000 PCR forms ground truthed Project OverviewProject of strokesuniform intensity of strokes Carbon Mesh AttributesCarbon Mesh Attributes ·· Unevenly Textured ; Smears/SmudgesUnevenly Textured ; Smears/Smudges ·· Carbon intensityCarbon intensity maymay be same as stroke intensitybe same

  5. Research Start-up Request Form Please use this form for all start-up requests.

    E-Print Network [OSTI]

    Thomas, Andrew

    Research Start-up Request Form Please use this form for all start-up requests. All requests must: Department: College: Date of Offer: Start Date: Year 1 Year 2 Year 3 Fiscal Year: Equipment: Amount of Start-up of Start-up Provided by Dept. or College Year 1 Year 2 Year 3 Amount: Planned Use: EVP/Provost Signature

  6. Unified description of kaon electroweak form factors

    SciTech Connect (OSTI)

    A. Afanasev; W. Buck

    1996-06-01T23:59:59.000Z

    A calculation of the semileptonic decays of the kaon (K{sub l3}) is presented. The results are direct predictions of a covariant model of the pion and kaon introduced earlier by Ito, Buck, Gross. The weak form factors for K{sub l3} are predicted with absolutely no parameter adjustments of the model. The authors obtained for the form factor parameters: f{sub {minus}}(q{sup 2}=m{sub l}{sup 2})/f{sub +}(q{sup 2}=m{sub l}{sup 2})={minus}0.28 and {lambda}{sub +}= 0.028, both within experimental error bars. Connections of this approach to heavy quark symmetry will also be discussed.

  7. Contour forming of metals by laser peening

    DOE Patents [OSTI]

    Hackel, Lloyd (Livermore, CA); Harris, Fritz (Rocklin, CA)

    2002-01-01T23:59:59.000Z

    A method and apparatus are provided for forming shapes and contours in metal sections by generating laser induced compressive stress on the surface of the metal workpiece. The laser process can generate deep compressive stresses to shape even thick components without inducing unwanted tensile stress at the metal surface. The precision of the laser-induced stress enables exact prediction and subsequent contouring of parts. A light beam of 10 to 100 J/pulse is imaged to create an energy fluence of 60 to 200 J/cm.sup.2 on an absorptive layer applied over a metal surface. A tamping layer of water is flowed over the absorptive layer. The absorption of laser light causes a plasma to form and consequently creates a shock wave that induces a deep residual compressive stress into the metal. The metal responds to this residual stress by bending.

  8. Fully relativistic form factor for Thomson scattering

    SciTech Connect (OSTI)

    Palastro, J. P.; Ross, J. S.; Pollock, B.; Divol, L.; Froula, D. H.; Glenzer, S. H. [Lawrence Livermore National Laboratory, Livermore, California 94551 (United States)

    2010-03-15T23:59:59.000Z

    We derive a fully relativistic form factor for Thomson scattering in unmagnetized plasmas valid to all orders in the normalized electron velocity, beta->=v->/c. The form factor is compared to a previously derived expression where the lowest order electron velocity, beta->, corrections are included [J. Sheffield, Plasma Scattering of Electromagnetic Radiation (Academic Press, New York, 1975)]. The beta-> expansion approach is sufficient for electrostatic waves with small phase velocities such as ion-acoustic waves, but for electron-plasma waves the phase velocities can be near luminal. At high phase velocities, the electron motion acquires relativistic corrections including effective electron mass, relative motion of the electrons and electromagnetic wave, and polarization rotation. These relativistic corrections alter the scattered emission of thermal plasma waves, which manifest as changes in both the peak power and width of the observed Thomson-scattered spectra.

  9. An improved integrally formed radio frequency quadrupole

    DOE Patents [OSTI]

    Abbott, S.R.

    1987-10-05T23:59:59.000Z

    An improved radio frequency quadrupole is provided having an elongate housing with an elongate central axis and top, bottom and two side walls symmetrically disposed about the axis, and vanes formed integrally with the walls, the vanes each having a cross-section at right angles to the central axis which tapers inwardly toward the axis to form electrode tips spaced from each other by predetermined distances. Each of the four walls, and the vanes integral therewith, is a separate structural element having a central lengthwise plane passing through the tip of the vane, the walls having flat mounting surfaces at right angles to and parallel to the control plane, respectively, which are butted together to position the walls and vane tips relative to each other. 4 figs.

  10. Superplasticity dome forming of machined sheets

    SciTech Connect (OSTI)

    Akkus, Nihat; Usugi, Toshihiro; Kawahara, Masanori; Manabe, Kenichi; Nishimura, Hisashi

    2000-07-01T23:59:59.000Z

    An experimental work on the superplastic bulge forming of machined sheets is presented in this study. Unlike the previously employed incremental-iterative method, a reverse deformation model was used to estimate the initial thickness distribution of the machined sheets from which a constant final thickness can be obtained when the shape of the bulged sheet is hemisphere. The reverse deformation model was obtained by modifying previously-known models, which were based on the axisymmetric membrane and the incremental strain theory. Bulge forming experiments were conducted on machined sheets of Al alloy, A5083, at about 530 C under constant pressure control mode. The result of this simulation to estimate the final constant thickness distribution agreed well with the experiment, and confirmed that the reverse deformation model can be successfully applied in optimizing the thickness distribution of the starting sheets in order to obtain the desired final thickness distribution of the free bulged hemispherical product.

  11. Titanium sealing glasses and seals formed therefrom

    DOE Patents [OSTI]

    Brow, R.K.; McCollister, H.L.; Phifer, C.C.; Day, D.E.

    1997-12-02T23:59:59.000Z

    Alkaline-earth lanthanoborate sealing-glass compositions containing CaO, La{sub 2}O{sub 3}, B{sub 2}O{sub 3}, TiO{sub 2} and Al{sub 2}O{sub 3} in various combinations of mole-% are provided. These sealing-glass compositions are useful for forming hermetic glass-to-metal seals with titanium and titanium alloys that have a high aqueous durability for component or device applications requiring exposure to moisture, water or body fluids. Particular applications of the titanium sealing-glass compositions include forming glass-to-metal seals for lithium batteries and implanted biomedical devices (e.g. batteries, pacemakers, defibrillators, pumps). 2 figs.

  12. Titanium sealing glasses and seals formed therefrom

    DOE Patents [OSTI]

    Brow, Richard K. (Albuquerque, NM); McCollister, Howard L. (Albuquerque, NM); Phifer, Carol C. (Albuquerque, NM); Day, Delbert E. (Rolla, MO)

    1997-01-01T23:59:59.000Z

    Alkaline-earth lanthanoborate sealing-glass compositions containing CaO, La.sub.2 O.sub.3, B.sub.2 O.sub.3, TiO.sub.2 and Al.sub.2 O.sub.3 in various combinations of mole-% are provided. These sealing-glass compositions are useful for forming hermetic glass-to-metal seals with titanium and titanium alloys that have a high aqueous durability for component or device applications requiring exposure to moisture, water or body fluids. Particular applications of the titanium sealing-glass compositions include forming glass-to-metal seals for lithium batteries and implanted biomedical devices (e.g. batteries, pacemakers, defibrillators, pumps).

  13. On form factors and Macdonald polynomials

    E-Print Network [OSTI]

    Lashkevich, Michael

    2013-01-01T23:59:59.000Z

    We are developing the algebraic construction for form factors of local operators in the sinh-Gordon theory proposed in [B.Feigin, M.Lashkeivch, 2008]. We show that the operators corresponding to the null vectors in this construction are given by the degenerate Macdonald polynomials with rectangular partitions and the parameters $t=-q$ on the unit circle. We obtain an integral representation for the null vectors and discuss its simple applications.

  14. On form factors and Macdonald polynomials

    E-Print Network [OSTI]

    Michael Lashkevich; Yaroslav Pugai

    2014-12-23T23:59:59.000Z

    We are developing the algebraic construction for form factors of local operators in the sinh-Gordon theory proposed in [B.Feigin, M.Lashkeivch, 2008]. We show that the operators corresponding to the null vectors in this construction are given by the degenerate Macdonald polynomials with rectangular partitions and the parameters $t=-q$ on the unit circle. We obtain an integral representation for the null vectors and discuss its simple applications.

  15. Forms and Determinant Lines Simon Scott

    E-Print Network [OSTI]

    Bushnell, Colin J.

    has discrete spectrum {(n + )2 , (n - )2 : n N}, where u = e2i satisfies u2 (1 + |z|2 ) + 2u(z + z Forms and Determinant Lines Simon Scott 1 Introduction The purpose here is to give a direct (M) Hi-2 (Y ) is integration over the fibres. That is, with = c1(T) ch(Ind (m)) = f em · 1 - e

  16. Mourre's method for a dissipative form perturbation

    E-Print Network [OSTI]

    Julien Royer

    2014-11-27T23:59:59.000Z

    We prove uniform resolvent estimates for an abstract operator given by a dissipative perturbation of a self-adjoint operator in the sense of forms. For this we adapt the commutators method of Mourre. We also obtain the limiting absorption principle and uniform estimates for the derivatives of the resolvent. This abstract work is motivated by the Schr{\\"o}dinger and wave equations on a wave guide with dissipation at the boundary.

  17. Texas Plant Disease Diagnostic Lab Information Form

    E-Print Network [OSTI]

    Barnes, Larry W.

    2009-01-16T23:59:59.000Z

    TEXAS PLANT DISEASE DIAGNOSTIC LABORATORY 1500 Research Parkway, Suite A130 Texas A&M University Research Park College Station, Texas 77845 e-mail: plantclinic@ag.tamu.edu phone: 979.845.8032 fax: 979.845.6499 http..., disability, religion, age, or national origin. The Texas A&M System, U.S. Department of Agriculture, and the County Commissioners Courts of Texas cooperating. Please complete form for diagnostic services. Please PRINT and mark ? all that apply. PLANT...

  18. $?$ and $?'$ transition form factors from Pad approximants

    E-Print Network [OSTI]

    Pablo Sanchez-Puertas; Pere Masjuan

    2014-11-17T23:59:59.000Z

    We employ a systematic and model-independent method to extract, from space- and time-like data, the $\\eta$ and $\\eta'$ transition form factors (TFFs) obtaining the most precise determination for their low-energy parameters and discuss the $\\Gamma_{\\eta\\rightarrow\\gamma\\gamma}$ impact on them. Using TFF data alone, we also extract the $\\eta-\\eta'$ mixing parameters, which are compatible to those obtained from more sophisticated and input-demanding procedures.

  19. Mentor Profile Form | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |EnergyonSupport0.pdf5 OPAM SEMIANNUAL REPORTMAMay 20 ESTAPServicesU.SMentor Profile Form

  20. Geothermal Form 1 | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to: navigation, searchGeauga County,Information(EC-LEDS) |PhasesGeothermal Form 1Legal

  1. Heavy to light baryon transition form factors

    SciTech Connect (OSTI)

    Guo, X. [Centro Brasileiro de Pesquisas Fisicas, Rio de Janeiro, Brasil] [Centro Brasileiro de Pesquisas Fisicas, Rio de Janeiro, Brasil; [Institute of High Energy Physics, Academia Sinica, Beijing 100039, People`s Republic of (China); Huang, T. [CCAST (World Laboratory) P.O. Box 8730, Beijing 100080, People`s Republic of (China)] [CCAST (World Laboratory) P.O. Box 8730, Beijing 100080, People`s Republic of (China); [Institute of High Energy Physics, Academia Sinica, Beijing 100039, People`s Republic of (China); Li, Z. [Institute of High Energy Physics, Academia Sinica, Beijing 100039, People`s Republic of (China)] [Institute of High Energy Physics, Academia Sinica, Beijing 100039, People`s Republic of (China)

    1996-05-01T23:59:59.000Z

    Recently, Stech found form factor relations for heavy to light transitions based on two simple dynamical assumptions for a spectator particle. In this paper we generalize his approach to the case of baryons and find that for {Lambda}{sub {ital Q}}{r_arrow}{Lambda} ({ital Q}={ital b} or {ital c}) only one independent form factor remains in the limit {ital m}{sub {ital Q}}{r_arrow}{infinity}. Furthermore, combining with the model of Guo and Kroll we determine both of the two form factors for {Lambda}{sub {ital Q}}{r_arrow}{Lambda} in the heavy quark limit. The results are applied to {Lambda}{sub {ital b}}{r_arrow}{Lambda}+{ital J}/{psi} which is not clarified both theoretically and experimentally. It is found that the branching ratio of {Lambda}{sub {ital b}}{r_arrow}{Lambda}+{ital J}/{psi} is of order 10{sup {minus}5}. {copyright} {ital 1996 The American Physical Society.}

  2. STUDENT ORGANIZATION VEHICLE RENTAL FORM Use this form in conjunction with a vehicle reservation form to request a rental vehicle from University of Michigan

    E-Print Network [OSTI]

    Kirschner, Denise

    STUDENT ORGANIZATION VEHICLE RENTAL FORM Use this form in conjunction with a vehicle reservation form to request a rental vehicle from University of Michigan (U-M) Parking and Transportation Services Services to confirm vehicle availability before submitting a request. Form Instructions: Complete each

  3. APPLICATION FOR CREDIT EARNED IN HIGH SCHOOL High School Form

    E-Print Network [OSTI]

    Keinan, Alon

    APPLICATION FOR CREDIT EARNED IN HIGH SCHOOL High School Form Student Instructions: Submit one high school and college form for each college course you have completed. Complete Part I of each form. Forward this form to your high school official to have Part II completed. Forward the college form

  4. Advancing Material Models for Automotive Forming Simulations

    SciTech Connect (OSTI)

    Vegter, H.; An, Y.; Horn, C.H.L.J. ten; Atzema, E.H.; Roelofsen, M.E. [Corus Research Development and Technology, PO Box 10000, 1970 CA IJmuiden (Netherlands)

    2005-08-05T23:59:59.000Z

    Simulations in automotive industry need more advanced material models to achieve highly reliable forming and springback predictions. Conventional material models implemented in the FEM-simulation models are not capable to describe the plastic material behaviour during monotonic strain paths with sufficient accuracy. Recently, ESI and Corus co-operate on the implementation of an advanced material model in the FEM-code PAMSTAMP 2G. This applies to the strain hardening model, the influence of strain rate, and the description of the yield locus in these models. A subsequent challenge is the description of the material after a change of strain path.The use of advanced high strength steels in the automotive industry requires a description of plastic material behaviour of multiphase steels. The simplest variant is dual phase steel consisting of a ferritic and a martensitic phase. Multiphase materials also contain a bainitic phase in addition to the ferritic and martensitic phase. More physical descriptions of strain hardening than simple fitted Ludwik/Nadai curves are necessary.Methods to predict plastic behaviour of single-phase materials use a simple dislocation interaction model based on the formed cells structures only. At Corus, a new method is proposed to predict plastic behaviour of multiphase materials have to take hard phases into account, which deform less easily. The resulting deformation gradients create geometrically necessary dislocations. Additional micro-structural information such as morphology and size of hard phase particles or grains is necessary to derive the strain hardening models for this type of materials.Measurements available from the Numisheet benchmarks allow these models to be validated. At Corus, additional measured values are available from cross-die tests. This laboratory test can attain critical deformations by large variations in blank size and processing conditions. The tests are a powerful tool in optimising forming simulations prior to larger scale industrial validation.

  5. Neutron electric form factor via recoil polarimetry

    SciTech Connect (OSTI)

    Richard Madey; Andrei Semenov; Simon Taylor; Aram Aghalaryan; Erick Crouse; Glen MacLachlan; Bradley Plaster; Shigeyuki Tajima; William Tireman; Chenyu Yan; Abdellah Ahmidouch; Brian Anderson; Razmik Asaturyan; O. Baker; Alan Baldwin; Herbert Breuer; Roger Carlini; Michael Christy; Steve Churchwell; Leon Cole; Samuel Danagoulian; Donal Day; Mostafa Elaasar; Rolf Ent; Manouchehr Farkhondeh; Howard Fenker; John Finn; Liping Gan; Kenneth Garrow; Paul Gueye; Calvin Howell; Bitao Hu; Mark Jones; James Kelly; Cynthia Keppel; Mahbubul Khandaker; Wooyoung Kim; Stanley Kowalski; Allison Lung; David Mack; D. Manley; Pete Markowitz; Joseph Mitchell; Hamlet Mkrtchyan; Allena Opper; Charles Perdrisat; Vina Punjabi; Brian Raue; Tilmann Reichelt; Joerg Reinhold; Julie Roche; Yoshinori Sato; Wonick Seo; Neven Simicevic; Gregory Smith; Samuel Stepanyan; Vardan Tadevosyan; Liguang Tang; Paul Ulmer; William Vulcan; John Watson; Steven Wells; Frank Wesselmann; Stephen Wood; Chen Yan; Seunghoon Yang; Lulin Yuan; Wei-Ming Zhang; Hong Guo Zhu; Xiaofeng Zhu

    2003-05-01T23:59:59.000Z

    The ratio of the electric to the magnetic form factor of the neutron, G_En/G_Mn, was measured via recoil polarimetry from the quasielastic d({pol-e},e'{pol-n)p reaction at three values of Q^2 [viz., 0.45, 1.15 and 1.47 (GeV/c)^2] in Hall C of the Thomas Jefferson National Accelerator Facility. Preliminary data indicate that G_En follows the Galster parameterization up to Q^2 = 1.15 (GeV/c)^2 and appears to rise above the Galster parameterization at Q^2 = 1.47 (GeV/c)^2.

  6. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2003-08-19T23:59:59.000Z

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  7. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2005-05-10T23:59:59.000Z

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  8. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2003-08-26T23:59:59.000Z

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  9. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2003-07-29T23:59:59.000Z

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  10. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2004-09-28T23:59:59.000Z

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  11. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2003-08-05T23:59:59.000Z

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of ternary mixtures consisting of: Ni powder, Cu powder, and Al powder, Ni powder, Cr powder, and Al powder; Ni powder, W powder and Al powder; Ni powder, V powder, and Al powder; Ni powder, Mo powder, and Al powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  12. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2005-01-25T23:59:59.000Z

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  13. Biaxially textured articles formed by power metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2003-08-26T23:59:59.000Z

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  14. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goval, Amit; Williams, Robert K.; Kroeger, Donald M.

    2005-06-07T23:59:59.000Z

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  15. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2004-09-14T23:59:59.000Z

    A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  16. Process for forming retrograde profiles in silicon

    DOE Patents [OSTI]

    Weiner, Kurt H. (San Jose, CA); Sigmon, Thomas W. (Phoenix, AZ)

    1996-01-01T23:59:59.000Z

    A process for forming retrograde and oscillatory profiles in crystalline and polycrystalline silicon. The process consisting of introducing an n- or p-type dopant into the silicon, or using prior doped silicon, then exposing the silicon to multiple pulses of a high-intensity laser or other appropriate energy source that melts the silicon for short time duration. Depending on the number of laser pulses directed at the silicon, retrograde profiles with peak/surface dopant concentrations which vary from 1-1e4 are produced. The laser treatment can be performed in air or in vacuum, with the silicon at room temperature or heated to a selected temperature.

  17. Method for forming a barrier layer

    SciTech Connect (OSTI)

    Weihs, Timothy P. (Baltimore, MD); Barbee, Jr., Troy W. (Palo Alto, CA)

    2002-01-01T23:59:59.000Z

    Cubic or metastable cubic refractory metal carbides act as barrier layers to isolate, adhere, and passivate copper in semiconductor fabrication. One or more barrier layers of the metal carbide are deposited in conjunction with copper metallizations to form a multilayer characterized by a cubic crystal structure with a strong (100) texture. Suitable barrier layer materials include refractory transition metal carbides such as vanadium carbide (VC), niobium carbide (NbC), tantalum carbide (TaC), chromium carbide (Cr.sub.3 C.sub.2), tungsten carbide (WC), and molybdenum carbide (MoC).

  18. Field testing of waste forms using lysimeters

    SciTech Connect (OSTI)

    McConnell, J.W. Jr.; Rogers, R.D.

    1987-01-01T23:59:59.000Z

    The Low-Level Waste Data Base Development - EPICOR-II Resin/Liner Investigation Program funded by the US Nuclear Regulatory Commission is obtaining information on performance of radioactive waste in a disposal environment. Waste forms manufactured from ion exchange resins used to clean up water from the accident at Three Mile Island Nuclear Power Station are being examined in field tests. This paper presents a description of the field testing and results from the first year of operation. 8 refs., 8 figs., 4 tabs.

  19. ProForm | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating Solar Powerstories onFocusOskiPhilipspresents new Climate Action PlanUtils CommProForm

  20. Document Submission Form | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed Newcatalyst phasesDataTranslocationDiurnal Cycle ofDo New55Submission Form Version

  1. ORPS Facility Registration Form | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGY TAXBalanced ScorecardReactor TechnologyOFFICE: NEPAOREMORPS Facility Registration Form

  2. Paperwork Reduction Act Form | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG |September 15, 2010Energy6 Frontera STAT. 1867NOTE TO: Cynthia L.Form

  3. CDOT Applications and Forms | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin: EnergyBoston Areais3: Crystalline Rock - Basement JumpGeneral: CDOT -Forms Jump

  4. Form W-8BEN (Rev. February 2006)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsing ZirconiaPolicyFeasibilityFieldMinds" |beamtheForForeignForestForkliftForm

  5. Form W-9 (Rev. December 2011)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsing ZirconiaPolicyFeasibilityFieldMinds" |beamtheForForeignForestForkliftForm1)

  6. Form W-9 (Rev. October 2007)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsing ZirconiaPolicyFeasibilityFieldMinds" Give form to the requester. Do not

  7. Widget:FormButton | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place: SaltTroyer &AnchorTextExpandableTextStartFormButton Jump

  8. RRC Form H-11 | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revisionEnvReviewNonInvasiveExplorationUT-g Grant of Access Permit5-ID-aREC Solar JumpRGS Development BV JumpForm

  9. FAQs for Survey Form EIA-14

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781 2,328 2,683DieselValues shown for the current twoForm EIA-14 What

  10. FAQs for Survey Form EIA-182

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781 2,328 2,683DieselValues shown for the current twoForm EIA-14

  11. FAQs for Survey Form EIA-3

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781 2,328 2,683DieselValues shown for the current twoForm EIA-143

  12. FAQs for Survey Form EIA-782A

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781 2,328 2,683DieselValues shown for the current twoForm EIA-143A

  13. FAQs for Survey Form EIA-782C

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781 2,328 2,683DieselValues shown for the current twoForm EIA-143AC

  14. FAQs for Survey Form EIA-7A

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781 2,328 2,683DieselValues shown for the current twoForm EIA-143ACA

  15. FAQs for Survey Form EIA-821

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781 2,328 2,683DieselValues shown for the current twoForm EIA-143ACA1

  16. FAQs for Survey Form EIA-856

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781 2,328 2,683DieselValues shown for the current twoForm

  17. FAQs for Survey Form EIA-878

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781 2,328 2,683DieselValues shown for the current twoForm78 What is

  18. FAQs for Survey Form EIA-8A

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781 2,328 2,683DieselValues shown for the current twoForm78 What isA

  19. FAQs for Survey Forms 802 and 812

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781 2,328 2,683DieselValues shown for the current twoForm78 What2 and

  20. FAQs for Survey Forms 804 and 814

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781 2,328 2,683DieselValues shown for the current twoForm78 What2

  1. FAQs for Survey Forms 805 and 815

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781 2,328 2,683DieselValues shown for the current twoForm78

  2. FAQs for Survey Forms 809 and 819

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781 2,328 2,683DieselValues shown for the current twoForm789 and 819

  3. FAQs for Survey Forms EIA-826

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781 2,328 2,683DieselValues shown for the current twoForm789

  4. FAQs for Survey Forms EIA-861

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781 2,328 2,683DieselValues shown for the current twoForm78961 Used

  5. Form Approval: OMB No. 1905-0129

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781 2,328 2,683DieselValues shown for the current8610) Form

  6. EIA - 2008 New Electric Power Forms

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines AboutDecemberSteam Coal Import96 4.87CBECS Public Use Data03. U.S. uraniumForms What's

  7. Form 2A | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublicIDAPowerPlantSitingConstruction.pdfNotify98.pdf JumpFlix SolarBlackFluvanna3°,Forestville, Ohio:200LegalForm

  8. Form 2B | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublicIDAPowerPlantSitingConstruction.pdfNotify98.pdf JumpFlix SolarBlackFluvanna3°,Forestville, Ohio:200LegalForm

  9. Form:Testing Facility | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublicIDAPowerPlantSitingConstruction.pdfNotify98.pdf JumpFlixMapFile Jump to: navigation,SampleForm JumpInput your

  10. Form:RecipePage | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating Solar Power Basics (TheEtelligence (SmartHome Kyoung'sfor Action (FORMA)form. To

  11. Form:Tool | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating Solar Power Basics (TheEtelligence (SmartHome Kyoung'sfor Action (FORMA)form.

  12. CSLB ROW Forms | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin: EnergyBoston Areais3: Crystalline Rock -COPPE Incubator JumpISES-Forms JumpROW

  13. CSLC ROW Forms | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin: EnergyBoston Areais3: Crystalline Rock -COPPE Incubator JumpISES-FormsCSLCForms

  14. Texas GLO Coastal Forms | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:Seadov Pty LtdSteen,Ltd Jump Jump to: navigation, searchTetra SunCounty, Missouri:Forms

  15. Technetium Waste Form Development - Progress Report

    SciTech Connect (OSTI)

    Gelles, David S.; Ermi, Ruby M.; Buck, Edgar C.; Seffens, Rob J.; Chamberlin, Clyde E.

    2009-01-07T23:59:59.000Z

    Analytical electron microscopy using SEM and TEM has been used to analyze a ~5 g. ingot with composition 71.3 wt% 316SS-5.3 wt% Zr-13.2 wt% Mo-4.0 wt% Rh-6.2 wt% Re prepared at the Idaho National Laboratory. Four phase fields have been identified two of which are lamellar eutectics, with a fifth possibly present. A Zr rich phase was found distributed as fine precipitate, ~10m in diameter, often coating large cavities. A Mo-Fe-Re-Cr lamellar eutectic phase field appears as blocky regions ~30m in diameter, surrounded by a Fe-Mo-Cr lamellar eutectic phase field, and that in turn is surrounded by a Zr-Fe-Rh-Mo-Ni phase field. The eutectic phase separation reactions are different. The Mo-Fe-Re-Cr lamellar eutectic appears a result of austenitic steel forming at lower volume fraction within an Mo-Fe-Re intermetallic phase, whereas the Fe-Mo-Cr lamellar eutectic may be a result of the same intermetallic phase forming within a ferritic steel phase. Cavitation may have arisen either as a result of bubbles, or from loss of equiaxed particles during specimen preparation.

  16. Helium Compton Form Factor Measurements at CLAS

    SciTech Connect (OSTI)

    Voutier, Eric J.-M. [Laboratoire de Physique Subatomique et Cosmologie

    2013-07-01T23:59:59.000Z

    The distribution of the parton content of nuclei, as encoded via the generalized parton distributions (GPDs), can be accessed via the deeply virtual Compton scattering (DVCS) process contributing to the cross section for leptoproduction of real photons. Similarly to the scattering of light by a material, DVCS provides information about the dynamics and the spatial structure of hadrons. The sensitivity of this process to the lepton beam polarization allows to single-out the DVCS amplitude in terms of Compton form factors that contain GPDs information. The beam spin asymmetry of the $^4$He($\\vec {\\mathrm e}$,e$' \\gamma ^4$He) process was measured in the experimental Hall B of the Jefferson Laboratory to extract the real and imaginary parts of the twist-2 Compton form factor of the $^4$He nucleus. The experimental results reported here demonstrate the relevance of this method for such a goal, and suggest the dominance of the Bethe-Heitler amplitude to the unpolarized process in the kinematic range explored by the experiment.

  17. DSNF AND OTHER WASTE FORM DEGRADATION ABSTRACTION

    SciTech Connect (OSTI)

    T.A. Thornton

    2000-12-20T23:59:59.000Z

    The purpose of this analysis/model report (AMR) is to select and/or abstract conservative degradation models for DOE-(US. Department of Energy) owned spent nuclear fuel (DSNF) and the immobilized ceramic plutonium (Pu) disposition waste forms for application in the proposed monitored geologic repository (MGR) postclosure Total System Performance Assessment (TSPA). Application of the degradation models abstracted herein for purposes other than TSPA should take into consideration the fact that they are, in general, very conservative. Using these models, the forward reaction rate for the mobilization of radionuclides, as solutes or colloids, away from the waste fondwater interface by contact with repository groundwater can then be calculated. This forward reaction rate generally consists of the dissolution reaction at the surface of spent nuclear fuel (SNF) in contact with water, but the degradation models, in some cases, may also include and account for the physical disintegration of the SNF matrix. The models do not, however, account for retardation, precipitation, or inhibition of the migration of the mobilized radionuclides in the engineered barrier system (EBS). These models are based on the assumption that all components of the DSNF waste form are released congruently with the degradation of the matrix.

  18. Directory of Standard, Optional and Other Agency Forms

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1989-12-12T23:59:59.000Z

    The directive lists the Directory of Standard, Optional and Other Agency Forms and includes a list of Departmental reports and forms managers. Cancels DOE 1322.4A.

  19. 2015 INL TECH BASED ECONOMIC DEVELOPMENT DONATION REQUEST FORM

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    INL TECH BASED ECONOMIC DEVELOPMENT DONATION REQUEST FORM Regional Economic Development, Entrepreneurship, Technology-Based Economic Development & Innovation Return form to...

  20. Registered_Lobbyist_Contact_Disclosure_Form.pdf | Department...

    Broader source: Energy.gov (indexed) [DOE]

    egisteredLobbyistContactDisclosureForm.pdf More Documents & Publications Lobbyist Disclosure Form - AltEn Interested Parties - Shipp Interested Parties - Smith Dawson & Andrews...

  1. Vacancies Ordered in Screw Form (VOSF) and Layered Indium Selenide...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Form (VOSF) and Layered Indium Selenide Thin Film Deposition by Laser Back Ablation. Vacancies Ordered in Screw Form (VOSF) and Layered Indium Selenide Thin Film Deposition by...

  2. apolipoprotein forming soluble: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    these is pointed out. Kamal K. Seth 2007-12-03 411 PROGRAM CLARIFICATION RETURN FORM Power Transmission, Distribution and Plants Websites Summary: . This form is printed on...

  3. Comparative assessment of TRU waste forms and processes. Volume I. Waste form and process evaluations

    SciTech Connect (OSTI)

    Ross, W.A.; Lokken, R.O.; May, R.P.; Roberts, F.P.; Timmerman, C.L.; Treat, R.L.; Westsik, J.H. Jr.

    1982-09-01T23:59:59.000Z

    This study provides an assesses seven waste forms and eight processes for immobilizing transuranic (TRU) wastes. The waste forms considered are cast cement, cold-pressed cement, FUETAP (formed under elevated temperature and pressure) cement, borosilicate glass, aluminosilicate glass, basalt glass-ceramic, and cold-pressed and sintered silicate ceramic. The waste-immobilization processes considered are in-can glass melting, joule-heated glass melting, glass marble forming, cement casting, cement cold-pressing, FUETAP cement processing, ceramic cold-pressing and sintering, basalt glass-ceramic processing. Properties considered included gas generation, chemical durability, mechanical strength, thermal stability, and radiation stability. The ceramic products demonstrated the best properties, except for plutonium release during leaching. The glass and ceramic products had similar properties. The cement products generally had poorer properties than the other forms, except for plutonium release during leaching. Calculations of the Pu release indicated that the waste forms met the proposed NRC release rate limit of 1 part in 10/sup 5/ per year in most test conditions. The cast-cement process had the lowest processing cost, followed closely by the cold-pressed and FUETAP cement processes. Joule-heated glass melting had the lower cost of the glass processes. In-can melting in a high-quality canister had the highest cost, and cold-pressed and sintered ceramic the second highest. Labor and canister costs for in-can melting were identified. The major contributor to costs of disposing of TRU wastes in a defense waste repository is waste processing costs. Repository costs could become the dominant cost for disposing of TRU wastes in a commercial repository. It is recommended that cast and FUETAP cement and borosilicate glass waste-form systems be considered. 13 figures, 16 tables.

  4. Resonant normal form and asymptotic normal form behavior in magnetic bottle Hamiltonians

    E-Print Network [OSTI]

    C. Efthymiopoulos; M. Harsoula; G. Contopoulos

    2015-01-28T23:59:59.000Z

    We consider normal forms in `magnetic bottle' type Hamiltonians of the form $H=\\frac{1}{2}(\\rho^2_\\rho+\\omega^2_1\\rho^2) +\\frac{1}{2}p^2_z+hot$ (second frequency $\\omega_2$ equal to zero in the lowest order). Our main results are: i) a novel method to construct the normal form in cases of resonance, and ii) a study of the asymptotic behavior of both the non-resonant and the resonant series. We find that, if we truncate the normal form series at order $r$, the series remainder in both constructions decreases with increasing $r$ down to a minimum, and then it increases with $r$. The computed minimum remainder turns to be exponentially small in $\\frac{1}{\\Delta E}$, where $\\Delta E$ is the mirror oscillation energy, while the optimal order scales as an inverse power of $\\Delta E$. We estimate numerically the exponents associated with the optimal order and the remainder's exponential asymptotic behavior. In the resonant case, our novel method allows to compute a `quasi-integral' (i.e. truncated formal integral) valid both for each particular resonance as well as away from all resonances. We applied these results to a specific magnetic bottle Hamiltonian. The non resonant normal form yields theorerical invariant curves on a surface of section which fit well the empirical curves away from resonances. On the other hand the resonant normal form fits very well both the invariant curves inside the islands of a particular resonance as well as the non-resonant invariant curves. Finally, we discuss how normal forms allow to compute a critical threshold for the onset of global chaos in the magnetic bottle.

  5. Biaxially textured articles formed by powder metallurgy

    DOE Patents [OSTI]

    Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

    2003-10-21T23:59:59.000Z

    A strengthened, biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed, compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: Ni, Ag, Ag--Cu, Ag--Pd, Ni--Cu, Ni--V, Ni--Mo, Ni--Al, Ni--Cr--Al, Ni--W--Al, Ni--V--Al, Ni--Mo--Al, Ni--Cu--Al; and at least one fine metal oxide powder; the article having a grain size which is fine and homogeneous; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

  6. Forming equatorial rings around dying stars

    E-Print Network [OSTI]

    Akashi, Muhammad; Yogev, Ohad; Soker, Noam

    2015-01-01T23:59:59.000Z

    We suggest that clumpy-dense outflowing equatorial rings around evolved giant stars, such as in supernova 1987A and the Necklace planetary nebula, are formed by bipolar jets that compress gas toward the equatorial plane. The jets are launched from an accretion disk around a stellar companion. Using the FLASH hydrodynamics numerical code we perform 3D numerical simulations, and show that bipolar jets expanding into a dense spherical shell can compress gas toward the equatorial plane and lead to the formation of an expanding equatorial ring. Rayleigh-Taylor instabilities in the interaction region break the ring to clumps. Under the assumption that the same ring-formation mechanism operates in massive stars and in planetary nebulae, we find this mechanism to be more promising for ring formation than mass loss through the second Lagrangian point. The jets account also for the presence of a bipolar nebula accompanying many of the rings.

  7. Method of forming and assembly of parts

    DOE Patents [OSTI]

    Ripley, Edward B. (Knoxville, TN)

    2010-12-28T23:59:59.000Z

    A method of assembling two or more parts together that may be metal, ceramic, metal and ceramic parts, or parts that have different CTE. Individual parts are formed and sintered from particles that leave a network of interconnecting porosity in each sintered part. The separate parts are assembled together and then a fill material is infiltrated into the assembled, sintered parts using a method such as capillary action, gravity, and/or pressure. The assembly is then cured to yield a bonded and fully or near-fully dense part that has the desired physical and mechanical properties for the part's intended purpose. Structural strength may be added to the parts by the inclusion of fibrous materials.

  8. Laser theory in manifest Lindblad form

    E-Print Network [OSTI]

    C. Henkel

    2007-05-06T23:59:59.000Z

    We discuss the laser theory for a single-mode laser with nonlinear gain. We focus in particular on a micromaser which is pumped with a dilute beam of excited atoms crossing the laser cavity. In the weak-coupling regime, an expansion in the coupling strength is developed that preserves the Lindblad form of the master equation, securing the positivity of the density matrix. This expansion breaks rapidly down above threshold. This can be improved with an alternative approach, not restricted to weak coupling: the Lindblad operators are expanded in orthogonal polynomials adapted to the probability distribution for the atom-laser interaction time. Results for the photon statistics and the laser linewidth illustrate the theory.

  9. Method for forming a chemical microreactor

    DOE Patents [OSTI]

    Morse, Jeffrey D. (Martinez, CA); Jankowski, Alan (Livermore, CA)

    2009-05-19T23:59:59.000Z

    Disclosed is a chemical microreactor that provides a means to generate hydrogen fuel from liquid sources such as ammonia, methanol, and butane through steam reforming processes when mixed with an appropriate amount of water. The microreactor contains capillary microchannels with integrated resistive heaters to facilitate the occurrence of catalytic steam reforming reactions. Two distinct embodiment styles are discussed. One embodiment style employs a packed catalyst capillary microchannel and at least one porous membrane. Another embodiment style employs a porous membrane with a large surface area or a porous membrane support structure containing a plurality of porous membranes having a large surface area in the aggregate, i.e., greater than about 1 m.sup.2/cm.sup.3. Various methods to form packed catalyst capillary microchannels, porous membranes and porous membrane support structures are also disclosed.

  10. Secondary Waste Form Down-Selection Data PackageFluidized Bed Steam Reforming Waste Form

    SciTech Connect (OSTI)

    Qafoku, Nikolla; Westsik, Joseph H.; Strachan, Denis M.; Valenta, Michelle M.; Pires, Richard P.

    2011-09-12T23:59:59.000Z

    The Hanford Site in southeast Washington State has 56 million gallons of radioactive and chemically hazardous wastes stored in 177 underground tanks (ORP 2010). The U.S. Department of Energy (DOE), Office of River Protection (ORP), through its contractors, is constructing the Hanford Tank Waste Treatment and Immobilization Plant (WTP) to convert the radioactive and hazardous wastes into stable glass waste forms for disposal. Within the WTP, the pretreatment facility will receive the retrieved waste from the tank farms and separate it into two treated process streams. These waste streams will be vitrified, and the resulting waste canisters will be sent to offsite (high-level waste [HLW]) and onsite (immobilized low-activity waste [ILAW]) repositories. As part of the pretreatment and ILAW processing, liquid secondary wastes will be generated that will be transferred to the Effluent Treatment Facility (ETF) on the Hanford Site for further treatment. These liquid secondary wastes will be converted to stable solid waste forms that will be disposed of in the Integrated Disposal Facility (IDF). To support the selection of a waste form for the liquid secondary wastes from WTP, Washington River Protection Solutions (WRPS) has initiated secondary waste form testing work at Pacific Northwest National Laboratory (PNNL). In anticipation of a down-selection process for a waste form for the Solidification Treatment Unit to be added to the ETF, PNNL is developing data packages to support that down-selection. The objective of the data packages is to identify, evaluate, and summarize the existing information on the four waste forms being considered for stabilizing and solidifying the liquid secondary wastes. At the Hanford Site, the FBSR process is being evaluated as a supplemental technology for treating and immobilizing Hanford LAW radioactive tank waste and for treating secondary wastes from the WTP pretreatment and LAW vitrification processes.

  11. High redshift star-forming galaxies in absorption and emission

    E-Print Network [OSTI]

    Quider, Anna Marie

    2011-07-12T23:59:59.000Z

    -forming galaxies in the redshift range 1 emission filling of absorption lines which has implications...

  12. Form No. 836 R5 ST 2629 10/91

    E-Print Network [OSTI]

    .S. Government retains a nonexclusive, royalty-free license to publish or reproduce the published form

  13. Graduation Checklist 1. Submit study program (form 1)

    E-Print Network [OSTI]

    Sidorova, Natalia

    the graduation regulations before actually starting your graduation project available at http://w3.win.tue.nl/nl/onderwijs/reglementen/ 3. Submit your graduation plan (form 2) before actually starting your graduation project formGraduation Checklist 1. Submit study program (form 1) if you have accumulated 40-50 credits form

  14. Training Certification Form (10-04) OFFICE OF RESEARCH SAFETY

    E-Print Network [OSTI]

    Kim, Duck O.

    Training Certification Form (10-04) OFFICE OF RESEARCH SAFETY TRAINING CERTIFICATION FORM Office-3826 The purpose of this form is to document training for those individuals who opt to use electronic media for required safety training. Prior to using this form and viewing a specific safety training module contact

  15. Nucleon Form Factors in Point-Form Spectator-Model Constructions

    E-Print Network [OSTI]

    T. Melde

    2006-12-06T23:59:59.000Z

    We discuss electromagnetic currents in the point-form formulation of relativistic quantum mechanics. The construction is along a spectator model and implies that only one quark is explicitly coupled to the photon, but nevertheless many-body contributions are present in the current operator. Such effects are unavoidable in relativistic constructions and resulting ambiguities are notably reduced by imposing charge normalization and time-reversal invariance. The residual theoretical indetermination introduces small but sizeable changes in the nucleon form-factors, particularly at higher Q-squared values, with the data generally centered in the middle of the theoretical band.

  16. Mandatory Green Power Option for Large Municipal Utilities

    Broader source: Energy.gov [DOE]

    Municipal electric utilities serving more than 40,000 customers in Colorado must offer an optional green-power program that allows retail customers the choice of supporting emerging renewable...

  17. Part 1 Identify yourself (mandatory) Student Number: _______________________Queen's Email: ________________________________________

    E-Print Network [OSTI]

    Abolmaesumi, Purang

    for the PPL and deposits for awards will use the same bank account). · Any changes to payroll banking

  18. Mandatory security and performance of services in Asbestos

    E-Print Network [OSTI]

    Ziegler, David Patrick

    2005-01-01T23:59:59.000Z

    This thesis presents the design and implementation for several system services, including network access and database storage, on a new operating system design, Asbestos. Using the security mechanism provided by Asbestos, ...

  19. Mandatory Information Disclosure Policies: Evidence from the Electricity Industry

    E-Print Network [OSTI]

    Delmas, Magali

    . All authors wish to thank seminar participants at the AERE Sessions at the AEA meetings Economists, the AERE sessions at the AAEA meetings, and the ISNIE conference for helpful comments. Special

  20. RESIDENTIAL MANDATORY MEASURES DIVISION 4.2 ENERGY EFFFICIENCY

    E-Print Network [OSTI]

    .203.1 Energy Efficiency. Newly constructed low-rise residential buildings shall comply with Sections A4 included in the performance compliance approach for the Standard Design Building (Energy Budget certified by the Energy Commission. SECTION A4.203 PERFORMANCE APPROACH FOR NEWLY CONSTRUCTED BUILDINGS A4

  1. Puerto Rico- Building Energy Code with Mandatory Solar Water Heating

    Broader source: Energy.gov [DOE]

    In 2009, the Governor of Puerto Rico provided assurance that Puerto Rico would update its building energy codes as part of the state's application for State Energy Program funds from the American...

  2. This report is mandatory under Public Law 93 275

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassiveSubmittedStatus TomAboutManusScienceThe43068 -Vanadium25, 2015 |Laboratory

  3. This report is mandatory under Public Law 93 275

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassiveSubmittedStatus TomAboutManusScienceThe43068 -Vanadium25, 2015 |LaboratoryNo.

  4. Mandatory Utility Green Power Option | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpIncMAKGalway Bay(Held

  5. Widget:LabelMandatoryFields | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place: SaltTroyerGetRecommendations JumpLEDSNavPopHelper Jump

  6. Sandia National Laboratories: mandatory reporting metrics for full wind

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1developmentturbine bladelifetime is the cumulative time under load mainplants

  7. OPPENHEIM CONJECTURE FOR PAIRS CONSISTING OF A LINEAR FORM AND A QUADRATIC FORM

    E-Print Network [OSTI]

    Gorodnik, Alexander

    OPPENHEIM CONJECTURE FOR PAIRS CONSISTING OF A LINEAR FORM AND A QUADRATIC of the Oppenheim conjecture, we prov* *e that the set {(Q(x), L(x)) : x 2 Zd} is dense in R2provided that Q; OPPENHEIM CONJECTURE FOR PAIRS 2 It is easy to see that the second condition

  8. Mobile Communication Device Allowance Authorization Form Revised: April 2011 MOBILE COMMUNICATION DEVICE ALLOWANCE AUTHORIZATION FORM

    E-Print Network [OSTI]

    Dyer, Bill

    Mobile Communication Device Allowance Authorization Form Revised: April 2011 MOBILE COMMUNICATION list your CURRENT PLAN features: Mobile service provider Name: ________ Monthly Charge: $ Device.edu/policy/itc/FINAL%20Policy%20on%20Mobile%20Comm%20Devices.htm I have read the Mobile Communication Devices Policy

  9. P&E Master's Programme Application Form 2011 [Page 1] Application Form

    E-Print Network [OSTI]

    Müller, Cord

    TITLE (Mr, Mrs, Ms, Miss, etc) GENDER MALE FEMALE DATE OF BIRTH day month year PLACE OF BIRTH Form 2011 [Page 2] C. Current and Previous Higher Education (Please provide copies of certificates and include scores and enclose copies of certificates. 1. 2. 3. D. ACADEMIC REFEREES Please note

  10. Appendix B Forms Note: Current versions of these forms (downloadable) are available on-line at

    E-Print Network [OSTI]

    : [www.energy.ca.gov/renewables/documents/index.html#rps] Some of these forms are new or have been Program regulations. Schedule 1: Renewables and the Attestation are provided in this version Aggregate and Schedule 5: SB 1 Solar Program Status Report, are not directly applicable to the RPS program

  11. Cast alumina forming austenitic stainless steels

    DOE Patents [OSTI]

    Muralidharan, Govindarajan; Yamamoto, Yukinori; Brady, Michael P

    2013-04-30T23:59:59.000Z

    An austenitic stainless steel alloy consisting essentially of, in terms of weight percent ranges 0.15-0.5C; 8-37Ni; 10-25Cr; 2.5-5Al; greater than 0.6, up to 2.5 total of at least one element selected from the group consisting of Nb and Ta; up to 3Mo; up to 3Co; up to 1W; up to 3Cu; up to 15Mn; up to 2Si; up to 0.15B; up to 0.05P; up to 1 total of at least one element selected from the group consisting of Y, La, Ce, Hf, and Zr; <0.3Ti+V; <0.03N; and, balance Fe, where the weight percent Fe is greater than the weight percent Ni, and wherein the alloy forms an external continuous scale comprising alumina, and a stable essentially single phase FCC austenitic matrix microstructure, the austenitic matrix being essentially delta-ferrite free and essentially BCC-phase-free. A method of making austenitic stainless steel alloys is also disclosed.

  12. Friction in Forming of UD Composites

    SciTech Connect (OSTI)

    Sachs, U.; Haanappel, S. P. [Thermoplastic Composite Research Center, University of Twente, Horst building, P.O. Box 217, 7500AE Enschede (Netherlands); Akkerman, R. [Faculty of Engineering Technology, University of Twente, P.O. Box 217, 7500AE Enschede (Netherlands); Thermoplastic Composite Research Center, University of Twente, Horst building, P.O. Box 217, 7500AE Enschede (Netherlands); Thije, R. H. W. ten [Aniform Virtual Forming, Nieuwstraat 116, 7411 LP Deventer (Netherlands); Rooij, M. B. de [Faculty of Engineering Technology, University of Twente, P.O. Box 217, 7500AE Enschede (Netherlands)

    2011-05-04T23:59:59.000Z

    Inter-ply and tool/ply friction play a dominant role in hot stamp forming of UD fiber-reinforced thermoplastic laminates. This research treats friction measurements of a PEEK-AS4 composite system. To this end, an in-house developed friction tester is utilized to pull a laminate through two heat controlled clamping platens. The friction coefficient is determined by relating the clamp force to the pull force. The geometry of the gap between the clamping platens is monitored with micrometer accuracy. A first approach to describe the relation between the geometry and frictional behavior is undertaken by applying a standard thin-film theory for hydrodynamic lubrication. Experimental measurements showed that the thin-film theory does not entirely cover the underlying physics. Thus a second model is utilized, which employs a Leonov-model to describe the shear deformation of the matrix material, while its viscosity is described with a multi-mode Maxwell model. The combination of both models shows the potential to capture the complete frictional behavior.

  13. CSNF WASTE FORM DEGRADATION: SUMMARY ABSTRACTION

    SciTech Connect (OSTI)

    J.C. CUNNANE

    2004-08-31T23:59:59.000Z

    The purpose of this model report is to describe the development and validation of models that can be used to calculate the release of radionuclides from commercial spent nuclear fuel (CSNF) following a hypothetical breach of the waste package and fuel cladding in the repository. The purpose also includes describing the uncertainties associated with modeling the radionuclide release for the range of CSNF types, exposure conditions, and durations for which the radionuclide release models are to be applied. This document was developed in accordance with Technical Work Plan for: Regulatory Integration Modeling and Analysis of the Waste Form and Waste Package (BSC 2004 [DIRS 169944]). This document considers radionuclides to be released from CSNF when they are available for mobilization by gas-phase mass transport, or by dissolution or colloid formation in water that may contact the fuel. Because other reports address limitations on the dissolved and colloidal radionuclide concentrations (BSC 2004 [DIRS 169944], Table 2-1), this report does not address processes that control the extent to which the radionuclides released from CSNF are mobilized and transported away from the fuel either in the gas phase or in the aqueous phase as dissolved and colloidal species. The scope is limited to consideration of degradation of the CSNF rods following an initial breach of the cladding. It considers features of CSNF that limit the availability of individual radionuclides for release into the gaseous or aqueous phases that may contact the fuel and the processes and events expected to degrade these CSNF features. In short, the purpose is to describe the characteristics of breached fuel rods and the degradation processes expected to influence radionuclide release.

  14. FORMING AN O STAR VIA DISK ACCRETION?

    SciTech Connect (OSTI)

    Qiu Keping [Max-Planck-Institut fuer Radioastronomie, Auf dem Huegel 69, D-53121 Bonn (Germany); Zhang Qizhou [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States); Beuther, Henrik; Fallscheer, Cassandra, E-mail: kqiu@mpifr-bonn.mpg.de [Max-Planck-Institut fuer Astronomie, Koenigstuhl 17, D-69117 Heidelberg (Germany)

    2012-09-10T23:59:59.000Z

    We present a study of outflow, infall, and rotation in a {approx}10{sup 5} L{sub Sun} star-forming region, IRAS 18360-0537, with Submillimeter Array and IRAM 30 m observations. The 1.3 mm continuum map shows a 0.5 pc dust ridge, of which the central compact part has a mass of {approx}80 M{sub Sun} and harbors two condensations, MM1 and MM2. The CO (2-1) and SiO (5-4) maps reveal a biconical outflow centered at MM1, which is a hot molecular core (HMC) with a gas temperature of 320 {+-} 50 K and a mass of {approx}13 M{sub Sun }. The outflow has a gas mass of 54 M{sub Sun} and a dynamical timescale of 8 Multiplication-Sign 10{sup 3} yr. The kinematics of the HMC are probed by high-excitation CH{sub 3}OH and CH{sub 3}CN lines, which are detected at subarcsecond resolution and unveil a velocity gradient perpendicular to the outflow axis, suggesting a disk-like rotation of the HMC. An infalling envelope around the HMC is evidenced by CN lines exhibiting a profound inverse P Cygni profile, and the estimated mass infall rate, 1.5 Multiplication-Sign 10{sup -3} M{sub Sun} yr{sup -1}, is well comparable to that inferred from the mass outflow rate. A more detailed investigation of the kinematics of the dense gas around the HMC is obtained from the {sup 13}CO and C{sup 18}O (2-1) lines; the position-velocity diagrams of the two lines are consistent with the model of a free-falling and Keplerian-like rotating envelope. The observations suggest that the protostar of a current mass {approx}10 M{sub Sun} embedded within MM1 will develop into an O star via disk accretion and envelope infall.

  15. Methods for forming particles from single source precursors

    DOE Patents [OSTI]

    Fox, Robert V. (Idaho Falls, ID); Rodriguez, Rene G. (Pocatello, ID); Pak, Joshua (Pocatello, ID)

    2011-08-23T23:59:59.000Z

    Single source precursors are subjected to carbon dioxide to form particles of material. The carbon dioxide may be in a supercritical state. Single source precursors also may be subjected to supercritical fluids other than supercritical carbon dioxide to form particles of material. The methods may be used to form nanoparticles. In some embodiments, the methods are used to form chalcopyrite materials. Devices such as, for example, semiconductor devices may be fabricated that include such particles. Methods of forming semiconductor devices include subjecting single source precursors to carbon dioxide to form particles of semiconductor material, and establishing electrical contact between the particles and an electrode.

  16. DSNF AND OTHER WASTE FORM DEGRADATION ABSTRACTION

    SciTech Connect (OSTI)

    J. CUNNANE

    2004-11-19T23:59:59.000Z

    Several hundred distinct types of DOE-owned spent nuclear fuel (DSNF) may potentially be disposed in the Yucca Mountain repository. These fuel types represent many more types than can be viably individually examined for their effect on the Total System Performance Assessment for the License Application (TSPA-LA). Additionally, for most of these fuel types, there is no known direct experimental test data for the degradation and dissolution of the waste form in repository groundwaters. The approach used in the TSPA-LA model is, therefore, to assess available information on each of 11 groups of DSNF, and to identify a model that can be used in the TSPA-LA model without differentiating between individual codisposal waste packages containing different DSNF types. The purpose of this report is to examine the available data and information concerning the dissolution kinetics of DSNF matrices for the purpose of abstracting a degradation model suitable for use in describing degradation of the DSNF inventory in the Total System Performance Assessment for the License Application. The data and information and associated degradation models were examined for the following types of DSNF: Group 1--Naval spent nuclear fuel; Group 2--Plutonium/uranium alloy (Fermi 1 SNF); Group 3--Plutonium/uranium carbide (Fast Flux Test Facility-Test Fuel Assembly SNF); Group 4--Mixed oxide and plutonium oxide (Fast Flux Test Facility-Demonstration Fuel Assembly/Fast Flux Test Facility-Test Demonstration Fuel Assembly SNF); Group 5--Thorium/uranium carbide (Fort St. Vrain SNF); Group 6--Thorium/uranium oxide (Shippingport light water breeder reactor SNF); Group 7--Uranium metal (N Reactor SNF); Group 8--Uranium oxide (Three Mile Island-2 core debris); Group 9--Aluminum-based SNF (Foreign Research Reactor SNF); Group 10--Miscellaneous Fuel; and Group 11--Uranium-zirconium hydride (Training Research Isotopes-General Atomics SNF). The analyses contained in this document provide an ''upper-limit'' (i.e., instantaneous degradation) model for use in the TSPA-LA model. ''Best-estimate'' models for the degradation of the fuels in each of the DSNF groups are discussed to provide a basis for selecting the upper limit model for use in the TSPA-LA model. The instantaneous degradation model is chosen for use in the TSPA-LA model because the available information shows that the degradation rate of the N Reactor fuel (which constitutes most of the DSNF inventory) is very high and because the available qualified information is insufficient to justify use of a less conservative approach. The commercial spent nuclear fuel model will be used for naval spent nuclear fuel because it has been shown to be conservative for representing naval spent nuclear fuel.

  17. Waste Form Degradation Model Integration for Engineered Materials...

    Broader source: Energy.gov (indexed) [DOE]

    models of glass waste form and metallic waste form degradation and the major corrosion products expected from these processes (e.g., gel and secondary phases such as clays...

  18. FORMS AND INSTRUCTIONS FOR PUBLICLY-OWNED UTILITIES

    E-Print Network [OSTI]

    CALIFORNIA ENERGY COMMISSION FORMS AND INSTRUCTIONS FOR PUBLICLY-OWNED UTILITIES SUBMITTING RETAIL as a Commission Report, and selected publicly-owned electric utilities will be required to provide the specified for Publicly-Owned Utility Forms........................................................... 11 Instructions

  19. Graphene forms template for two-dimensional hybrid materials...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Graphene forms template for two-dimensional hybrid materials January 17, 2014 Researchers have developed a new technique for forming a two-dimensional, single-atom sheet of two...

  20. MATERIALS MANAGEMENT OFFICE SUPPLY REQUEST FORM -MM-4

    E-Print Network [OSTI]

    Oliver, Douglas L.

    MATERIALS MANAGEMENT OFFICE SUPPLY REQUEST FORM - MM-4 REQUESTER'S NAME: DEPARTMENT: TTILE: MAIL. Include the justification with this form when faxing or mailing to Materials Management. Fax 679: ________________ University Director of Materials Management: _________________________________________________________ Date

  1. 30 Marine Fisheries Review Navigation and surveying formed

    E-Print Network [OSTI]

    and its supersession by the steam engine; while requiring in its new form no less ability and practiced

  2. Nanoscale Heterogeneity of Polyamide Membranes Formed by Interfacial Polymerization

    E-Print Network [OSTI]

    Freger, Viatcheslav "Slava"

    Nanoscale Heterogeneity of Polyamide Membranes Formed by Interfacial Polymerization Abstract theoretical model of polyamide membrane formation via interfacial polymerization. #12;

  3. INTERNSHIP COMMITMENT FORM Master of Professional Science (MPS)

    E-Print Network [OSTI]

    Miami, University of

    1 INTERNSHIP COMMITMENT FORM Master of Professional Science (MPS) Student Name: _______________________________________________________ Internship Organization: __________________________________ Address: ________________________________________ Internship Supervisor: ______________________________________________ E-Mail: ______________________ Phone

  4. INTERNSHIP COMMITMENT FORM Master of Professional Science (MPS)

    E-Print Network [OSTI]

    Miami, University of

    1 INTERNSHIP COMMITMENT FORM Master of Professional Science (MPS) STUDENT:______________________________________________________ _____________________________________________________________ Organization Website: ___________________________________________ INTERNSHIP SUPERVISOR: __________________________________________ E-Mail: ______________________________________ Phone: __________________________ INTERNSHIP DETAILS

  5. PeopleSoft (ERP) Finance Access Request Form User Guide

    E-Print Network [OSTI]

    de Lijser, Peter

    PeopleSoft (ERP) Finance Access Request Form User Guide Last Revised: 3/22/11 #12;PeopleSoft ERP Finance Access Request Form User Guide FINAL Last Revised: 3/22/11 Page ii REVISION CONTROL Document Title: PeopleSoft ERP Finance Access Request Form User Guide Author: IT Training & Support File Reference

  6. ARGONNE JOINT STAFF EMPLOYMENT FORM Effective 07/2010

    E-Print Network [OSTI]

    He, Chuan

    . ARGONNE JOINT STAFF EMPLOYMENT FORM Effective 07/2010 Page 1 of 1 Questions about this form Hawaiian/Pacific Islander Check Delivery Code ___________ Argonne Joint Staff Appointment -- Non ________________________________________________ Vice President for Research Date and for Argonne National Laboratory HR: INSTRUCTIONS: This form should

  7. Investigation of distortional buckling of cold-formed steel sections

    E-Print Network [OSTI]

    Birmingham, University of

    Investigation of distortional buckling of cold-formed steel sections Researcher: Chong Ren Supervisors: Dr Long-yuan Li Dr Jian Yang Aims and Objectives Thin-walled, cold-formed steel sections considered to be the most popular products and account for a substantial proportion of cold-formed steel

  8. Stability, electronic structure and reactivity of the polymerized fullerite forms

    E-Print Network [OSTI]

    Stability, electronic structure and reactivity of the polymerized fullerite forms V.V. Belavina , L density distribution from selected crystal orbitals of polymerized C60 forms was carried out. Linear chain with the highest occupied (HO) and lowest unoccupied (LU) bands. The polymerized C60 forms were found to be less

  9. L&S Deans' Office Purchase Request Form

    E-Print Network [OSTI]

    Mofrad, Mohammad R. K.

    L&S Deans' Office Purchase Request Form poses a risk to the University. The University has does not need to be by the original requestor of this purchase FOR OFFICE USE ONLY Approver: Cardholder://businessservices.berkeley.edu/HtmFiles/RestrictItems.htm) 2. One form may be used for multiple purchases from a single vendor. 3. Submit form to Blu

  10. SMITH NORMAL FORM OF A MULTIVARIATE MATRIX ASSOCIATED WITH PARTITIONS

    E-Print Network [OSTI]

    SMITH NORMAL FORM OF A MULTIVARIATE MATRIX ASSOCIATED WITH PARTITIONS CHRISTINE BESSENRODT polynomials, and by determining not only the deter- minant but also the Smith normal form of these matrices. A priori the Smith form need not exist but its existence follows from the explicit computation

  11. Smith Normal Form a possible basis for an

    E-Print Network [OSTI]

    Henkel, Werner

    Smith Normal Form ­ a possible basis for an SVD ­ like code construction? (Semester Project I) Name.7 The Smith Normal Form . . . . . . . . . . . . . . . . . . . . . . . 12 3 Detailed treatment of the possibilities to use Smith's Normal Form for coding 14 3.1 Introduction

  12. EIGENVALUES AND THE SMITH NORMAL FORM Joseph J. Rushanan

    E-Print Network [OSTI]

    Rushanan, Joe J.

    EIGENVALUES AND THE SMITH NORMAL FORM Joseph J. Rushanan The MITRE Corporation, M/S E025, Bedford, MA 01730 Abstract. Results are shown that compare the Smith Normal Form (SNF) over the integers and its Smith Normal Form (SNF) over the integers. Our goals are more general than those results

  13. Computation of Hermite and Smith Normal Forms of Matrices

    E-Print Network [OSTI]

    Storjohann, Arne

    Computation of Hermite and Smith Normal Forms of Matrices; Abstract We study the problem of computing Hermite and Smith normal forms of ma- trices over. One first result is a fast Las Vegas probabilistic algorithm to compute the * *Smith normal form

  14. Computation of Hermite and Smith Normal Forms of Matrices

    E-Print Network [OSTI]

    Storjohann, Arne

    Computation of Hermite and Smith Normal Forms of Matrices by Arne Storjohann A thesis presented the problem of computing Hermite and Smith normal forms of ma­ trices over principal ideal domains. The main probabilistic algorithm to compute the Smith normal form of a polynomial matrix for those cases where pre

  15. Florida Bull Test 2014 Health Form (This form must accompany bulls at delivery to the Bull Test.)

    E-Print Network [OSTI]

    Jawitz, James W.

    Florida Bull Test 2014 Health Form (This form must accompany bulls at delivery to the Bull Test Inspection** (Health Paper) Date________________ Brucellosis Test Date_____________ or Certification Number_______________ Tuberculosis Test Date_____________ or Certification Number_______________ or T.B. free state ____________(yes

  16. On Ethics Form #1: There are two sections on this form where the vendor/contractor can list any campaign

    E-Print Network [OSTI]

    Alpay, S. Pamir

    On Ethics Form #1: There are two sections on this form where the vendor/contractor can list any by the vendor/contractor in the shaded box at the bottom before a notary, UNLESS the contractor has entered

  17. From form to function : an evaluation of the effectiveness and potential of form-based zoning codes

    E-Print Network [OSTI]

    Kohr, R. Todd (Robert Todd), 1976-

    2004-01-01T23:59:59.000Z

    This thesis analyzes the effectiveness and potential of form-based zoning codes, focusing on three research questions: (1) Are form-based codes a fundamentally-different alternative to Euclidean zoning, or are they simply ...

  18. Form EIA-861S ANNUAL ELECTRIC POWER INDUSTRY REPORT (SHORT FORM)

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781 2,328 2,683DieselValues shown for the current8610)FormG0M

  19. Method of forming buried oxide layers in silicon

    DOE Patents [OSTI]

    Sadana, Devendra Kumar (Pleasantville, NY); Holland, Orin Wayne (Lenoir City, TN)

    2000-01-01T23:59:59.000Z

    A process for forming Silicon-On-Insulator is described incorporating the steps of ion implantation of oxygen into a silicon substrate at elevated temperature, ion implanting oxygen at a temperature below 200.degree. C. at a lower dose to form an amorphous silicon layer, and annealing steps to form a mixture of defective single crystal silicon and polycrystalline silicon or polycrystalline silicon alone and then silicon oxide from the amorphous silicon layer to form a continuous silicon oxide layer below the surface of the silicon substrate to provide an isolated superficial layer of silicon. The invention overcomes the problem of buried isolated islands of silicon oxide forming a discontinuous buried oxide layer.

  20. Dissertation Permit Form Revised 09/09 CSE Ph.D. ADVISOR SELECTION AND PRE-DISSERTATION (8999) PERMIT FORM

    E-Print Network [OSTI]

    Gray, Alexander

    Dissertation Permit Form­ Revised 09/09 CSE Ph.D. ADVISOR SELECTION AND PRE-DISSERTATION (8999) hours, you must have a permanent advisor and have not passed the qualifier. You must complete this form in consultation with your dissertation advisor. Bring the signed form to the Academic Advisor in Computational

  1. Electronic Form W2 Instructions (rev 12/26/2011) Page 1 Electronic Form W-2 Instructions

    E-Print Network [OSTI]

    Dyer, Bill

    Electronic Form W2 Instructions (rev 12/26/2011) Page 1 Electronic Form W-2 Instructions to receive all future Forms W-2 in electronic format only and forego the paper copy after you have reviewed on "Electronic W-2 Consent" 5. Read the notice at the top of the Consent page. 6. Check the box next to "Consent

  2. Accident/Incident Reporting Form & Investigation Report FAX COMPLETED FORM (Within 24 hours) TO: 519-661-2079 (82079)

    E-Print Network [OSTI]

    Lennard, William N.

    Accident/Incident Reporting Form & Investigation Report FAX COMPLETED FORM (Within 24 hours) TO ­ Accident/Incident Reporting Form PART A Name of Employee: ______________________________________ Employee: Report Only Accident Incident No Injury/Hazard First Aid Lost Time Non-Lost Time (If Report Only

  3. Composite drill pipe and method for forming same

    DOE Patents [OSTI]

    Leslie, James C; Leslie, II, James C; Heard, James; Truong, Liem; Josephson, Marvin

    2014-04-15T23:59:59.000Z

    Metal inner and outer fittings configured, the inner fitting configured proximally with an external flange and projecting distally to form a cylindrical barrel and stepped down-in-diameter to form an abutment shoulder and then projecting further distally to form a radially inwardly angled and distally extending tapered inner sleeve. An outer sleeve defining a torque tube is configured with a cylindrical collar to fit over the barrel and is formed to be stepped up in diameter in alignment with the first abutment shoulder to then project distally forming a radially outwardly tapered and distally extending bonding surface to cooperate with the inner sleeve to cooperate with the inner sleeve in forming a annular diverging bonding cavity to receive the extremity of a composite pipe to abut against the abutment shoulders and to be bonded to the respective bonding surfaces by a bond.

  4. The Fukaya category, exotic forms and exotic autoequivalences

    E-Print Network [OSTI]

    Harris, Richard

    2012-04-10T23:59:59.000Z

    The Fukaya category, exotic forms and exotic autoequivalences Richard Mark Harris Department of Pure Mathematics and Mathematical Statistics Emmanuel College, Cambridge A thesis submitted for the degree of Doctor of Philosophy at the University... qualification. i Summary of the thesis The Fukaya category, exotic forms and exotic autoequivalences by Richard Mark Harris: A symplectic manifold is a smooth manifold M together with a choice of a closed non-degenerate two-form. Recent years have seen...

  5. Spray forming process for producing molds, dies and related tooling

    DOE Patents [OSTI]

    McHugh, Kevin M. (Idaho Falls, ID); Key, James F. (Idaho Falls, ID)

    1998-01-01T23:59:59.000Z

    A method for spray forming manufacturing of near-net-shape molds, dies and related toolings, wherein liquid material such as molten metal, metallic alloys, or polymers are atomized into fine droplets by a high temperature, high velocity gas and deposited onto a pattern. Quenching of the atomized droplets provides a heat sink, thereby allowing undercooled and partially solidified droplets to be formed in-flight. Composites can be formed by combining the atomized droplets with solid particles such as whiskers or fibers.

  6. Secondary Waste Cast Stone Waste Form Qualification Testing Plan

    SciTech Connect (OSTI)

    Westsik, Joseph H.; Serne, R. Jeffrey

    2012-09-26T23:59:59.000Z

    The Hanford Tank Waste Treatment and Immobilization Plant (WTP) is being constructed to treat the 56 million gallons of radioactive waste stored in 177 underground tanks at the Hanford Site. The WTP includes a pretreatment facility to separate the wastes into high-level waste (HLW) and low-activity waste (LAW) fractions for vitrification and disposal. The LAW will be converted to glass for final disposal at the Integrated Disposal Facility (IDF). Cast Stone a cementitious waste form, has been selected for solidification of this secondary waste stream after treatment in the ETF. The secondary-waste Cast Stone waste form must be acceptable for disposal in the IDF. This secondary waste Cast Stone waste form qualification testing plan outlines the testing of the waste form and immobilization process to demonstrate that the Cast Stone waste form can comply with the disposal requirements. Specifications for the secondary-waste Cast Stone waste form have not been established. For this testing plan, Cast Stone specifications are derived from specifications for the immobilized LAW glass in the WTP contract, the waste acceptance criteria for the IDF, and the waste acceptance criteria in the IDF Permit issued by the State of Washington. This testing plan outlines the testing needed to demonstrate that the waste form can comply with these waste form specifications and acceptance criteria. The testing program must also demonstrate that the immobilization process can be controlled to consistently provide an acceptable waste form product. This testing plan also outlines the testing needed to provide the technical basis for understanding the long-term performance of the waste form in the disposal environment. These waste form performance data are needed to support performance assessment analyses of the long-term environmental impact of the secondary-waste Cast Stone waste form in the IDF

  7. Methods of forming single source precursors, methods of forming polymeric single source precursors, and single source precursors formed by such methods

    DOE Patents [OSTI]

    Fox, Robert V.; Rodriguez, Rene G.; Pak, Joshua J.; Sun, Chivin; Margulieux, Kelsey R.; Holland, Andrew W.

    2014-09-09T23:59:59.000Z

    Methods of forming single source precursors (SSPs) include forming intermediate products having the empirical formula 1/2{L.sub.2N(.mu.-X).sub.2M'X.sub.2}.sub.2, and reacting MER with the intermediate products to form SSPs of the formula L.sub.2N(.mu.-ER).sub.2M'(ER).sub.2, wherein L is a Lewis base, M is a Group IA atom, N is a Group IB atom, M' is a Group IIIB atom, each E is a Group VIB atom, each X is a Group VIIA atom or a nitrate group, and each R group is an alkyl, aryl, vinyl, (per)fluoro alkyl, (per)fluoro aryl, silane, or carbamato group. Methods of forming polymeric or copolymeric SSPs include reacting at least one of HE.sup.1R.sup.1E.sup.1H and MER with one or more substances having the empirical formula L.sub.2N(.mu.-ER).sub.2M'(ER).sub.2 or L.sub.2N(.mu.-X).sub.2M'(X).sub.2 to form a polymeric or copolymeric SSP. New SSPs and intermediate products are formed by such methods.

  8. Methods of forming single source precursors, methods of forming polymeric single source precursors, and single source precursors and intermediate products formed by such methods

    DOE Patents [OSTI]

    Fox, Robert V.; Rodriguez, Rene G.; Pak, Joshua J.; Sun, Chivin; Margulieux, Kelsey R.; Holland, Andrew W.

    2012-12-04T23:59:59.000Z

    Methods of forming single source precursors (SSPs) include forming intermediate products having the empirical formula 1/2{L.sub.2N(.mu.-X).sub.2M'X.sub.2}.sub.2, and reacting MER with the intermediate products to form SSPs of the formula L.sub.2N(.mu.-ER).sub.2M'(ER).sub.2, wherein L is a Lewis base, M is a Group IA atom, N is a Group IB atom, M' is a Group IIIB atom, each E is a Group VIB atom, each X is a Group VIIA atom or a nitrate group, and each R group is an alkyl, aryl, vinyl, (per)fluoro alkyl, (per)fluoro aryl, silane, or carbamato group. Methods of forming polymeric or copolymeric SSPs include reacting at least one of HE.sup.1R.sup.1E.sup.1H and MER with one or more substances having the empirical formula L.sub.2N(.mu.-ER).sub.2M'(ER).sub.2 or L.sub.2N(.mu.-X).sub.2M'(X).sub.2 to form a polymeric or copolymeric SSP. New SSPs and intermediate products are formed by such methods.

  9. account form errors: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    reimbursement account Huang, Jianyu 2 SYSTEMS DEPARTMENT INTERNET ACCOUNT REQUEST FORM Energy Storage, Conversion and Utilization Websites Summary: SYSTEMS DEPARTMENT INTERNET...

  10. The interaction between photovoltaic materials and building forms.

    E-Print Network [OSTI]

    Qiu, Liming

    2009-01-01T23:59:59.000Z

    ??There is an intrinsic relationship between photovoltaic materials and building forms; although there are numerous imaginations and concepts about buildings integrated photovoltaic materials. The relationship (more)

  11. Disability & Dyslexia Support Service (DDSS) Consent to Share Information Form

    E-Print Network [OSTI]

    Li, Yi

    Disability & Dyslexia Support Service (DDSS) Consent to Share Information Form Please print By registering with the Disability and Dyslexia Support Service (DDSS) I understand that I am subscribed

  12. Political Economy Graduate Interdisciplinary Studies Program Course Completion Form (*)

    E-Print Network [OSTI]

    Political Economy Graduate Interdisciplinary Studies Program Course Completion Form (*) (03 of Political Science, Clark C346, and another one for your personal records. (**) Traditional students

  13. Coordination of Copper to the Membrane-Bound Form of ?...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    environmental copper exposure. Citation: Dudzik CG, ED Walter, BS Abrams, MS Jurica, and GL Millhauser.2013."Coordination of Copper to the Membrane-Bound Form of...

  14. EERE Postdoctoral Research Award Letter of Reference Form

    Broader source: Energy.gov [DOE]

    EERE Postdoctoral Research Award Letter of Reference Form, from the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy.

  15. Cell-targeted lytic pore-forming agents

    DOE Patents [OSTI]

    Bayley, H.; Walker, B.J.

    1998-10-20T23:59:59.000Z

    A chimeric compound that contains a cell-specific ligand linked to a pore-forming agent capable of lysing a cell. 18 figs.

  16. Cell-targeted lytic pore-forming agents

    DOE Patents [OSTI]

    Bayley, Hagen (Grafton, MA); Walker, Barbara J. (Auburn, MA)

    1998-01-01T23:59:59.000Z

    A chimeric compound that contains a cell-specific ligand linked to a pore-forming agent capable of lysing a cell.

  17. Cell-targeted lytic pore-forming agents

    DOE Patents [OSTI]

    Bayley, H.; Walker, B.J.

    1998-10-06T23:59:59.000Z

    A chimeric compound that contains a cell-specific ligand linked to a pore-forming agent capable of lysing a cell. 21 figs.

  18. alternative administration forms: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Project Information Form Project Title Assessment of Critical Barriers to Alternative and Renewable Fuel and Energy Storage, Conversion and Utilization Websites Summary: Project...

  19. Lobbyist Disclosure Form - First Solar | Department of Energy

    Energy Savers [EERE]

    First Solar Lobbyist Disclosure Form - First Solar Susan Richardson, Energy Department loan programs chief counsel; Douglas Schultz, Energy Department senior investment officer;...

  20. Scholarship Student Information Form Office of International Programs

    E-Print Network [OSTI]

    Scholarship Student Information Form Office of International Programs Thomas Residence Hall 203 this challenge? What do I ultimately plan to do? Why am I ready to lead

  1. Scholarship Student Information Form Office of International Programs and Fellowships

    E-Print Network [OSTI]

    Scholarship Student Information Form Office of International Programs and Fellowships 1706 Illinois this challenge? What do I ultimately plan to do? Why am I ready to lead

  2. FINAL DEMAND FORECAST FORMS AND INSTRUCTIONS FOR THE 2007

    E-Print Network [OSTI]

    CALIFORNIA ENERGY COMMISSION FINAL DEMAND FORECAST FORMS AND INSTRUCTIONS FOR THE 2007 INTEGRATED Table of Contents General Instructions for Demand Forecast Submittals.............................................................................. 4 Protocols for Submitted Demand Forecasts

  3. Nucleon Electromagnetic Form Factors: Free Space and Medium Modifications

    SciTech Connect (OSTI)

    Wally Melnitchouk

    2003-10-01T23:59:59.000Z

    We review recent developments in the study of electromagnetic form factors of the nucleon, both in free space and in the nuclear medium. For the free nucleon case, we discuss the ratio of electric to magnetic proton form factors, and the influence of two-photon exchange on the form factor extraction. For the bound nucleon, we examine the implications of the small but non-zero modification of proton form factors in the nuclear medium suggested by recent data on polarized proton knockout reactions off He-4, and discuss constraints which it could place on models of the nuclear EMC effect.

  4. Solid low level waste forms and extended storage

    SciTech Connect (OSTI)

    Kohout, R. [R. Kohout & Associates, Ltd., Toronto, Ontario (Canada)

    1995-11-01T23:59:59.000Z

    This paper presents regulatory, technical, and economic aspects of selecting solid waste forms for the extended on-site storage of power plant low level wastes (LLW) in the United States. The author explains current uncertainties and disposal site shortages, defines power plant waste types, addresses regulatory requirements for disposal, discusses basic waste form storage considerations, outlines possible strategies for the management of individual waste types, and offers methodological steps for selecting a waste form for extended storage. Broader issues closely associated with waste form selection are also presented.

  5. INTERNSHIP COMMITMENT FORM Master of Professional Science (MPS)

    E-Print Network [OSTI]

    Miami, University of

    INTERNSHIP COMMITMENT FORM Master of Professional Science (MPS) Student Name: _______________________________________________________ E-Mail: ________________________________ Phone: _______________________ Internship Organization: ________________________________________ Internship Supervisor: ______________________________________________ E-Mail: ______________________ Phone

  6. INTERNSHIP AGREEMENT FORM Master's of Professional Science (MPS)

    E-Print Network [OSTI]

    Miami, University of

    INTERNSHIP AGREEMENT FORM Master's of Professional Science (MPS) Student Name-Mail: ________________________________ Phone: _______________________ Internship Organization: __________________________________ Address: ________________________________________ Internship Supervisor: ______________________________________________ E-Mail: ______________________ Phone

  7. Lobbyist Disclosure Form - John Thorne | Department of Energy

    Energy Savers [EERE]

    Form - John Thorne John inquired whether there were any open solicitations for biofuels projects under 1703 and 1705. He was told there were no open solicitations at this...

  8. Austin E. Quigley Black Box Theater Proposal Form

    E-Print Network [OSTI]

    Hone, James

    -1- Austin E. Quigley Black Box Theater Proposal Form Sponsoring Organization indicate that you have read the Austin E. Quigley Black Box Theatre Policy and Procedure Guidelines

  9. Optimization Online - A Counterexample to Threshold Boolean form ...

    E-Print Network [OSTI]

    James Luedtke

    2015-01-02T23:59:59.000Z

    Jan 2, 2015 ... Abstract: Recently, in the paper Threshold Boolean form for joint probabilistic constraints with random technology matrix (Math. Program.

  10. Optimization of High-Volume Warm Forming for Lightweight Sheet...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of High-Volume Warm Forming for Lightweight Sheet Alloys 2012 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer...

  11. INTERAGENCY AGREEMENT FOR DEPARTMENT OF ENERGY PROJECT FACILITATOR SUPPORT FORM

    Broader source: Energy.gov [DOE]

    Document provides a Federal interagency agreement template for the U.S. Department of Energy (DOE), including instructions on how to complete the form.

  12. Optimization of forming load and variables in deep drawing process ...

    E-Print Network [OSTI]

    Ganesh Kakandikar

    2007-03-06T23:59:59.000Z

    Mar 6, 2007 ... Abstract: Sheet metal forming is a significant manufacturing process for producing a large variety of automotive parts and aerospace parts as...

  13. Crystalline Ceramic Waste Forms: Comparison Of Reference Process For Ceramic Waste Form Fabrication

    SciTech Connect (OSTI)

    Brinkman, K. S. [Savannah River National Laboratory; Marra, J. C. [Savannah River National Laboratory; Amoroso, J. [Savannah River National Laboratory; Tang, M. [Los Alamos National Laboratory

    2013-08-22T23:59:59.000Z

    The research conducted in this work package is aimed at taking advantage of the long term thermodynamic stability of crystalline ceramics to create more durable waste forms (as compared to high level waste glass) in order to reduce the reliance on engineered and natural barrier systems. Durable ceramic waste forms that incorporate a wide range of radionuclides have the potential to broaden the available disposal options and to lower the storage and disposal costs associated with advanced fuel cycles. Assemblages of several titanate phases have been successfully demonstrated to incorporate radioactive waste elements, and the multiphase nature of these materials allows them to accommodate variation in the waste composition. Recent work has shown that they can be produced from a melting and crystallization process. The objective of this report is to explore the phase formation and microstructural differences between lab scale melt processing in varying gas environments with alternative densification processes such as Hot Pressing (HP) and Spark Plasma Sintering (SPS). The waste stream used as the basis for the development and testing is a simulant derived from a combination of the projected Cs/Sr separated stream, the Trivalent Actinide - Lanthanide Separation by Phosphorous reagent Extraction from Aqueous Komplexes (TALSPEAK) waste stream consisting of lanthanide fission products, the transition metal fission product waste stream resulting from the transuranic extraction (TRUEX) process, and a high molybdenum concentration with relatively low noble metal concentrations. Melt processing as well as solid state sintering routes SPS and HP demonstrated the formation of the targeted phases; however differences in microstructure and elemental partitioning were observed. In SPS and HP samples, hollandite, pervoskite/pyrochlore, zirconolite, metallic alloy and TiO{sub 2} and Al{sub 2}O{sub 3} were observed distributed in a network of fine grains with small residual pores. The titanate phases that incorporate M{sup +3} rare earth elements were observed to be distinct phases (ex. Nd{sub 2}Ti{sub 2}O{sub 7}) with less degree of substitution as compared to the more homogeneous melt processed samples where a high degree of substitution and variation of composition within grains was observed. Liquid phase sintering was enhanced in reducing gas environments and resulted in large (10-200 microns) irregular shaped grains along with large voids associated with the melt process; SPS and HP samples exhibited finer grain size with smaller voids. Metallic alloys were observed in the bulk of the sample for SPS and HP samples, but were found at the bottom of the crucible in melt processed trials. These results indicate that for a first melter trial, the targeted phases can be formed in air by utilizing Ti/TiO{sub 2} additives which aid phase formation and improve the electrical conductivity. Ultimately, a melter run in reducing gas environments would be beneficial to study differences in phase formation and elemental partitioning.

  14. On Oppenheim-type conjecture for systems of quadratic forms

    E-Print Network [OSTI]

    Gorodnik, Alexander

    On Oppenheim-type conjecture for systems of quadratic forms Alexander Gorodnik Abstract Let Qi, i It was conjectured by Oppenheim that if Q(¯x) = i,j aijxixj, ¯x = (x1, . . . , xd), is a real nondegenerate(¯x)| Oppenheim conjecture holds for systems of quadratic forms (see

  15. Method for forming hermetic coatings for optical fibers

    DOE Patents [OSTI]

    Michalske, Terry A. (P.O. Box 1042, Cedar Crest, NM 87008); Rye, Robert R. (1304 Espanola NE., Albuquerque, NM 87110); Smith, William L. (9916 Fostoria Rd., NE., Albuquerque, NM 87111)

    1993-01-01T23:59:59.000Z

    A method for forming hermetic coatings on optical fibers by hot filament assisted chemical vapor deposition advantageously produces a desirable coating while maintaining the pristine strength of the pristine fiber. The hermetic coatings may be formed from a variety of substances, such as, for example, boron nitride and carbon.

  16. Contract Database Number: ______________ Boise State University CONTRACT ROUTING FORM

    E-Print Network [OSTI]

    Barrash, Warren

    Contract Database Number: ______________ Boise State University CONTRACT ROUTING FORM BSU Policy 1030 requires original copies of all contracts meeting certain criteria to be housed in the Archive Library. This form must accompany ALL Contracts submitted to the Office of the General Counsel. Please

  17. CORRECTION OF BUTT-WELDING INDUCED DISTORTIONS BY LASER FORMING

    E-Print Network [OSTI]

    Yao, Y. Lawrence

    CORRECTION OF BUTT-WELDING INDUCED DISTORTIONS BY LASER FORMING Peng Cheng, Andrew J. Birnbaum, Y Egland Technology and Solutions Division Caterpillar Inc. Peoria, IL KEYWORDS Welding, Distortion, Correction, Laser Forming ABSTRACT Welding-induced distortion is an intrinsic phenomenon arising due

  18. JAM 4 CAMP Vendor/Exhibitor Participation Form

    E-Print Network [OSTI]

    Watson, Craig A.

    JAM 4 CAMP Vendor/Exhibitor Participation Form Please return form to the Wakulla County Extension Office NO LATER THAN Friday, April 13th , 2012 EVENT is April 28, 2012 #12;VENDOR BOOTH AGREEMENT 2nd in consideration of payment/or promise of donation for each booth space requested: Food or Concession Vendors

  19. DEMONSTRATION RANK VIA THE SVD AND ROW ECHELON FORM

    E-Print Network [OSTI]

    Foster, Leslie

    OUTLINES DEMONSTRATION RANK VIA THE SVD AND ROW ECHELON FORM TWO TWISTS AND A TEST NUMERICAL RANK VIA THE SVD AND ROW ECHELON FORM TWO TWISTS AND A TEST NUMERICAL RESULTS CONCLUSIONS GOAL rank construct a basis for the null space. LESLIE FOSTER MATHEMATICS SAN JOSE STATE UNIVERSITY FOSTER

  20. Donor Transmittal Form To: British Schools & Universities Foundation

    E-Print Network [OSTI]

    Anderson, Jim

    Donor Transmittal Form To: British Schools & Universities Foundation 575 Madison Avenue Suite 1006 to the British Schools & Universities Foundation for which I/we plan to claim a charitable deduction for U be made payable to the `British Schools & Universities Foundation' and forwarded together with this form

  1. Static Single Information Form C. Scott Ananian and Martin Rinard

    E-Print Network [OSTI]

    Ananian, C. Scott

    Static Single Information Form C. Scott Ananian and Martin Rinard Laboratory for Computer Science#12;cantly optimize the program. Furthermore, we be- lieve that SSI form signi#12;cantly simpli#12;ed data ow analyses as a at, uni#12;ed system of constraints. This formulation allows us to generalize

  2. Nucleon Form Factors experiments with 12 GeV CEBAF

    SciTech Connect (OSTI)

    Wojtsekhowski, Bogdan

    2008-11-01T23:59:59.000Z

    A number of precision form factor experiments at high momentum transfer will be performed with the 11 GeV electron beam of CEBAF. We review the approved proposals and the conceptual schemes of several new suggestions. Form factor data will serve as a major input for the construction of a tomographic image of the nucleon.

  3. Nanoscale Tubules Formed by Exfoliation of Potassium Hexaniobate

    E-Print Network [OSTI]

    Nanoscale Tubules Formed by Exfoliation of Potassium Hexaniobate Geoffrey B. Saupe, Chad C. Waraksa. Revised Manuscript Received March 27, 2000 The exfoliation of acid-exchanged K4Nb6O17 with tetra formed early in the exfoliation process, which are found only as flat sheets. Tubules in colloidal

  4. Work-Study Job Directory* Job Publish Request Form

    E-Print Network [OSTI]

    Guenther, Frank

    Work-Study Job Directory* Job Publish Request Form Please note: Work-Study jobs can be posted via-mail address students may contact: Job Description Changes (if any): Help us keep the directory up that we may remove your listing(s) from the directory. This form is for posting existing work-study job

  5. Form-based zoning : what place is this code?

    E-Print Network [OSTI]

    Mehta, Shilpa, M.C.P. Massachusetts Institute of Technology

    2006-01-01T23:59:59.000Z

    Form-based zoning is a relatively recent innovation in zoning reform. Many cities in the U.S. have adopted form-based codes in lieu of or as a supplement to conventional zoning and many more are in the process of studying ...

  6. An Approach For Evolving Novel Organizational Forms Kevin Crowston

    E-Print Network [OSTI]

    Crowston, Kevin

    . Organizational ecologists tend to minimize the role of organizational learning and adaptation and instead seeAn Approach For Evolving Novel Organizational Forms Kevin Crowston crowston@umich.edu School;An approach for evolving novel organizational forms Abstract A key problem in organization theory

  7. Electronic Thesis and Dissertation (ETD) Submission Approval Form

    E-Print Network [OSTI]

    Arnold, Jonathan

    Electronic Thesis and Dissertation (ETD) Submission Approval Form 1/7/2013 Instructions School. #12;Electronic Thesis and Dissertation (ETD) Submission Approval Form 1/7/2013 Dissertation. The electronic submission and availability of the dissertation via the Web now makes the dissertation easier

  8. Conjugate and method for forming aminomethyl phosphorus conjugates

    DOE Patents [OSTI]

    Katti, Kattesh V. (Columbia, MO); Berning, Douglas E. (Columbia, MO); Volkert, Wynn A. (Columbia, MO); Ketring, Alan R. (Columbia, MO); Churchill, Robert (Columbia, MO)

    1999-01-01T23:59:59.000Z

    A method of forming phosphine-amine conjugates includes reacting a hydroxymethyl phosphine group of an amine-free first molecule with at least one free amine group of a second molecule to covalently bond the first molecule with the second molecule through an aminomethyl phosphorus linkage and the conjugates formed thereby.

  9. University of Missouri-Columbia Transfer Recommendation Form

    E-Print Network [OSTI]

    Taylor, Jerry

    University of Missouri-Columbia Transfer Recommendation Form Complete this form if you to the International Center at the University of Missouri-Columbia. For instructions on SEVIS transfer, please go to permission for the information below to be released to the University of Missouri-Columbia. Do you plan

  10. William and Mary Athletics Recruit Host Money Form

    E-Print Network [OSTI]

    Swaddle, John

    William and Mary Athletics Recruit Host Money Form This form must be completed when requesting reimbursement for recruit host money distributed to William and Mary student-athletes. 1. All expenses must from the William and Mary Athletics department, to be used for recruit host money during the dates

  11. DocumentedClinicalExperienceForm-PSTP University of California, Davis

    E-Print Network [OSTI]

    Leistikow, Bruce N.

    DocumentedClinicalExperienceForm-PSTP University of California, Davis School of Medicine, Registrar's Office Documented Clinical Experience Form- PSTP 4610 X Street, Suite 1208, Sacramento CA 95817 of their clinical experience. Please, contact the Program Manager to initiate this process. The UCD School

  12. Alumina-forming Austenitic Alloys for Advanced Recuperators

    SciTech Connect (OSTI)

    Pint, Bruce A [ORNL; Shingledecker, John P [ORNL; Brady, Michael P [ORNL; Maziasz, Philip J [ORNL

    2007-01-01T23:59:59.000Z

    Materials selection for thin-walled recuperators has been extensively investigated over the past decade. In the latest generation of recuperated turbine engines, type 347 stainless steel has been replaced by higher alloyed steels and Ni-base chromia-forming alloys. However, high (linear) rates of chromia evaporation in exhaust gas fundamentally limits the oxidation lifetime of these chromia-forming alloys. One solution is to use alumina-forming alloys that are more resistant to this environment. The lower scale growth kinetics and resistance to evaporation in the presence of water vapor suggests an order of magnitude increase in lifetime for alumina-forming alloys. A significant problem with this strategy was the large drop in creep strength with the addition of sufficient Al to form an external alumina scale. However, new Fe-base austenitic compositions have been developed with sufficient strength for this application above 700 C.

  13. Vendor Authorization/Change Form This form to be completed by University Employees Only New Change Vendor #

    E-Print Network [OSTI]

    Minnesota, University of

    Vendor Authorization/Change Form This form to be completed by University Employees Only New Change Vendor #: DUNS #: Name used by IRS TIN/EIN SSN (if different from above) ITIN No SSN/TIN Government Country E-mail Fax University Contact (required) - Email notification of vendor set up will be sent

  14. BIOLOGY DEPARTMENT STUDENT INFORMATION FORM Submit this form to the Biology Department Academic Office, room 102, Leidy Lab / 6018

    E-Print Network [OSTI]

    Plotkin, Joshua B.

    BIOLOGY DEPARTMENT STUDENT INFORMATION FORM Submit this form to the Biology Department Academic: In order to apply for the Biology Major, you must have completed at least one of the courses required one) If yes, what is (will be) your other major(s): *Note: Biology Majors are required to have

  15. UCC: Syllabus Checklist All UCC1 forms and each UCC2 form that proposes a change in the course

    E-Print Network [OSTI]

    Roy, Subrata

    UCC: Syllabus Checklist Rev. 10/10 All UCC1 forms and each UCC2 form that proposes a change in the course description or credit hours must include this checklist in addition to a complete syllabus. Check the box if the attached syllabus includes the indicated information. Instructor contact information (and

  16. CORPORATE AND FOUNDATION CLEARANCE REQUEST FORM Return this form along with your application and direct questions to: MSU Foundation,

    E-Print Network [OSTI]

    Dyer, Bill

    CORPORATE AND FOUNDATION CLEARANCE REQUEST FORM Return this form along with your application and direct questions to: MSU Foundation, Attn: Director of Corporate and Foundation Relations, 1501 South 11th Avenue, Bozeman, MT 59717 Phone: (406) 994-2522 SHOULD YOU GO TO THE MSU FOUNDATION OR THE OFFICE

  17. MILITARY TUITION ADJUSTMENT FORM Indicate the term for which you are requesting the Military Adjustment Form: Term Year

    E-Print Network [OSTI]

    Rutledge, Steven

    ­ provide copy of birth certificate or adoption certificate _____My spouse listed above as the student. Attach copies of all required documentation including birth certificates, adoption certificate, marriage Adjustment Form: Term Year Attention: Certification of this form must be signed and submitted to Student

  18. Helmholtz Theorem for Differential Forms in 3-D Euclidean Space

    E-Print Network [OSTI]

    Jose G. Vargas

    2014-04-20T23:59:59.000Z

    There are significant differences between Helmholtz and Hodge's decomposition theorems, but both share a common flavor. This paper is a first step to bring them together. We here produce Helmholtz theorems for differential 1-forms and 2-forms in 3-D Euclidean space. We emphasize their common structure in order to facilitate the understanding of another paper, soon to be made public, where a Helmholtz theorem for arbitrary differential forms in arbitrary Euclidean space is presented and which allows one to connect (actually to derive from it) an improvement of Hodge's decomposition theorem.

  19. Exotic Earths: Forming Habitable Worlds with Giant Planet Migration

    E-Print Network [OSTI]

    Sean N. Raymond; Avi M. Mandell; Steinn Sigurdsson

    2006-09-08T23:59:59.000Z

    Close-in giant planets (e.g. ``Hot Jupiters'') are thought to form far from their host stars and migrate inward, through the terrestrial planet zone, via torques with a massive gaseous disk. Here we simulate terrestrial planet growth during and after giant planet migration. Several-Earth mass planets also form interior to the migrating Jovian planet, analogous to recently-discovered ``Hot Earths''. Very water-rich, Earth-mass planets form from surviving material outside the giant planet's orbit, often in the Habitable Zone and with low orbital eccentricities. More than a third of the known systems of giant planets may harbor Earth-like planets.

  20. Spray forming process for producing molds, dies and related tooling

    DOE Patents [OSTI]

    McHugh, K.M.; Key, J.F.

    1998-02-17T23:59:59.000Z

    A method is disclosed for spray forming manufacturing of near-net-shape molds, dies and related toolings, wherein liquid material such as molten metal, metallic alloys, or polymers are atomized into fine droplets by a high temperature, high velocity gas and deposited onto a pattern. Quenching of the atomized droplets provides a heat sink, thereby allowing undercooled and partially solidified droplets to be formed in-flight. Composites can be formed by combining the atomized droplets with solid particles such as whiskers or fibers. 17 figs.