Powered by Deep Web Technologies
Note: This page contains sample records for the topic "form 715-01 part" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

EEOC FORM715-01 PART A - D  

National Nuclear Security Administration (NNSA)

US Department of Energy National Nuclear Security Administration Management Directive 715 Fiscal Year 2008 National Nuclear Security Administration FY 2008 MD-715 EEO Program Status Report Table of Contents Page Parts A-C: Agency Identifying Information.............................................................1 Part D: Subordinate Components.........................................................................2 Part E: Executive Summary................................................................................4 Part F: Certification.....................................................................................10 Part G: Facility Self-Assessment.................................................................................11

2

EEOC FORM  

National Nuclear Security Administration (NNSA)

U.S. Department of Energy U.S. Department of Energy National Nuclear Security Administration Management Directive-715 Fiscal Year 2012 DOE NNSA February 4, 2013 i National Nuclear Security Administration U.S. Department of Energy ANNUAL EEO PROGRAM STATUS REPORT EEO PLAN TO ATTAIN THE ESSENTIAL ELEMENTS OF A MODEL EEO PROGRAM Table of Contents Page FORM 715-01 Part A Department or Agency Identifying Information......................1 FORM 715-01 Part B Total Employment....................................................................1 FORM 715-01 Part C Agency Official(s) Responsible for oversight of EEO Program(s)................................................................................................................1

3

Microsoft Word - FY 2011 MD-715 Report.docx  

National Nuclear Security Administration (NNSA)

1 1 DOE NNSA December 14, 2011 i National Nuclear Security Administration U.S. Department of Energy ANNUAL EEO PROGRAM STATUS REPORT EEO PLAN TO ATTAIN THE ESSENTIAL ELEMENTS OF A MODEL EEO PROGRAM Table of Contents Page FORM 715-01 Part A Department or Agency Identifying Information......................1 FORM 715-01 Part B Total Employment....................................................................1 FORM 715-01 Part C Agency Official(s) Responsible for oversight of EEO Program(s)................................................................................................................1 FORM 715-01 Part D List of Subordinate Components Covered in this Report ........3 FORM 715-01 Part E Executive Summary.................................................................4

4

Method of forming and assembly of parts  

DOE Patents (OSTI)

A method of assembling two or more parts together that may be metal, ceramic, metal and ceramic parts, or parts that have different CTE. Individual parts are formed and sintered from particles that leave a network of interconnecting porosity in each sintered part. The separate parts are assembled together and then a fill material is infiltrated into the assembled, sintered parts using a method such as capillary action, gravity, and/or pressure. The assembly is then cured to yield a bonded and fully or near-fully dense part that has the desired physical and mechanical properties for the part's intended purpose. Structural strength may be added to the parts by the inclusion of fibrous materials.

Ripley, Edward B. (Knoxville, TN)

2010-12-28T23:59:59.000Z

5

Method of forming and assembly of metal and ceramic parts  

DOE Patents (OSTI)

A method of forming and assembling at least two parts together that may be metal, ceramic, or a combination of metal and ceramic parts. Such parts may have different CTE. Individual parts that are formed and sintered from particles leave a network of interconnecting porosity in each sintered part. The separate parts are assembled together and then a fill material is infiltrated into the assembled parts using a method such as capillary action, gravity, and/or pressure. The assembly is then cured to yield a bonded and fully or near-fully dense part that has the desired physical and mechanical properties for the part's intended purpose. Structural strength may be added to the parts by the inclusion of fibrous materials.

Ripley, Edward B

2014-04-22T23:59:59.000Z

6

Method of forming and assembly of metal parts and ceramic parts  

DOE Patents (OSTI)

A method of forming and assembling at least two parts together that may be metal, ceramic, or a combination of metal and ceramic parts. Such parts may have different CTE. Individual parts that are formed and sintered from particles leave a network of interconnecting porosity in each sintered part. The separate parts are assembled together and then a fill material is infiltrated into the assembled parts using a method such as capillary action, gravity, and/or pressure. The assembly is then cured to yield a bonded and fully or near-fully dense part that has the desired physical and mechanical properties for the part's intended purpose. Structural strength may be added to the parts by the inclusion of fibrous materials.

Ripley, Edward B. (Knoxville, TN)

2011-11-22T23:59:59.000Z

7

Honors Contract Form Instructions Part A: Initiating a Contract  

E-Print Network (OSTI)

Honors Contract Form Instructions Part A: Initiating a Contract This entire section should students to spend some time thinking about why they are contracting the specific course and what they expect to get out of it the contract. Honors Contract Activities Section: There are four separate boxes

Huang, Haiying

8

Working times in atypical forms of employment: the special case of part-time work  

E-Print Network (OSTI)

market. In an Employment Survey carried out by the French National Statistics Office (INSEE), part- timeChapter 5 Working times in atypical forms of employment: the special case of part-time work Patrick Abstract: In the present article, we attempt to devise a typology of forms of part-time employment

Paris-Sud XI, Université de

9

EXPERIMENTAL STUDY OF FORMING RENE95 ALLOY PARTS BY LASER CLADDING Qilin Deng, Dejin Hu, and Jingyu Pei  

E-Print Network (OSTI)

EXPERIMENTAL STUDY OF FORMING RENE95 ALLOY PARTS BY LASER CLADDING Qilin Deng, Dejin Hu, and Jingyu, experimental study of forming metal parts by laser cladding Rene95 alloy powder was reported. The influence, width and the angle of the laser cladding track was investigated. The microstructures of laser cladding

Yao, Y. Lawrence

10

Forms  

NLE Websites -- All DOE Office Websites (Extended Search)

are in .pdf format) After Hours Access Policy After Hours Request Form Cleanroom Access Procedures for New Users Deposition Request Form Exit Form Flycutting Request Form Hot...

11

TCD-UCD Innovation Academy As part of their recently-formed Innovation Alliance, Trinity College Dublin and University  

E-Print Network (OSTI)

, but encompasses cultural, social and policy innovation characteristic of arts, humanities and the social sciencesTCD-UCD Innovation Academy As part of their recently-formed Innovation Alliance, Trinity College Dublin and University College Dublin have launched the Innovation Academy to transform the brightest

O'Mahony, Donal E.

12

A Model Based Approach to Increase the Part Accuracy in Robot Based Incremental Sheet Metal Forming  

SciTech Connect

One main influence on the dimensional accuracy in robot based incremental sheet metal forming results from the compliance of the involved robot structures. Compared to conventional machine tools the low stiffness of the robot's kinematic results in a significant deviation of the planned tool path and therefore in a shape of insufficient quality. To predict and compensate these deviations offline, a model based approach, consisting of a finite element approach, to simulate the sheet forming, and a multi body system, modeling the compliant robot structure, has been developed. This paper describes the implementation and experimental verification of the multi body system model and its included compensation method.

Meier, Horst; Laurischkat, Roman; Zhu Junhong [Institute Product and Service Engineering, Chair of Production Systems, Ruhr-University of Bochum, Universitaetsstrasse 150, D-44780 Bochum (Germany)

2011-01-17T23:59:59.000Z

13

Academic/Faculty Advisor Recommendation Form for CPT -Part 1 Page 1 of 3 Rev 5/07 DPm:/icall/icpdf/isss/F1/CPT/CPTreqadvisor rev 04/14  

E-Print Network (OSTI)

Academic/Faculty Advisor Recommendation Form for CPT - Part 1 Page 1 of 3 Rev 5/07 DPm: internationalcenter.umich.edu This form must be completed by an Academic/Faculty Advisor. Part 1 may be completed) ________ Anticipated Academic Program Completion Date ______________ Check one: As the student's advisor, I certify

Papalambros, Panos

14

High temperature corrosion of boiler waterwalls induced by chlorides and bromides. Part 1: Occurrence of the corrosive ash forming elements in a fluidised bed boiler co-firing solid recovered fuel  

Science Journals Connector (OSTI)

In waste fired boilers high temperature corrosion has often been attributed to zinc and lead chlorides. In addition, bromine induced high temperature corrosion has been earlier observed in a bubbling fluidised bed (BFB) boiler co-firing solid recovered fuel (SRF) with bark and wastewater sludge. In Part 1 of this work a measurement campaign was undertaken to determine the occurrence of Cl, Br, Zn and Pb in the fuel, in the combustion gases as well as in the deposits on the boiler waterwalls. It was observed that Cl, Br, Zn and Pb originate to a large extent from the SRF, they are vaporised in the furnace, and may form waterwall deposits. This, complemented by fluctuations between oxidising and reducing atmosphere resulted in rapid corrosion of the waterwall tubes. Concentrations of Cl, Br, Zn and Pb in the fuel, in the furnace vapours and in the deposits are reported in this work. As there is lack of published data on the bromine induced high temperature corrosion, laboratory scale corrosion tests were carried out to determine the relative corrosiveness of chlorine and bromine and these results will be reported in Part 2 of this work. Furthermore, the forms of Cl, Br, Zn and Pb in the combustion gases as well as in the waterwall deposits were estimated by means of thermodynamic equilibrium modelling and these results will also be discussed in Part 2.

P. Vainikka; D. Bankiewicz; A. Frantsi; J. Silvennoinen; J. Hannula; P. Yrjas; M. Hupa

2011-01-01T23:59:59.000Z

15

Form Approv  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

'JOE I' ':0 'JOE I' ':0 ) e " Flee/romc Form Approv ed by CGIR· 01120195 (8 ./1" United States Government Department of Energy Bonneville Power Administra ion memorandum DATE : uC l J !:' ZD y REPLY TO ATTN OF : KEP-4 SUBJECT: Environmental Clearance Memorandum TO ; Rob Ochs Project Manager - TELM-TPP-3 Proposed Action: Lane-Wendson No.1 Structure 10/5 Access Road Improvement and Pole Replacement Project Budget Information: Work Order # 224549 PP&A Project No.: 1117 Proposed by: Bonneville Power Administration (BPA) Categorical Exclusion Applied (from Sub part 0,10 C.F.R. Part) 021): B 1.3, Routine maintenance activities ... for structures, rights-of-way, infrastructures such as roads, equipment. .. routine maintenance activities, corrective ... .are required to maintain

16

EEOC FORM  

National Nuclear Security Administration (NNSA)

09 09 National Nuclear Security Administration FY 2009 MD-715 EEO Program Status Report Table of Contents Page Parts A-C: Agency Identifying Information .........................................................................2 Part D: Subordinate Components..........................................................................................4 Part E: Executive Summary ..................................................................................................5 Part F: Certification...............................................................................................................14 Part G: Essential Elements of a Model EEO Program (A-F)................................................16 Part H: Plan to Reach Model EEO Program Status

17

Earth Forms.  

E-Print Network (OSTI)

??Earth Forms narrates and explains the Masters Project Exhibition by the same name. The sculptures included in the exhibition, Earth Forms, use a variety of (more)

Mock, Janelle Marie Tullis

2010-01-01T23:59:59.000Z

18

Coach Compliance Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Coach Compliance Form Coach Compliance Form My team is participating in the Department of Energy's Lithium-Ion Battery Car Competition as part of the National Science Bowl ® . I have reviewed the following documents with the participating students: o Safety Hazards of Batteries o Material Safety Data Sheet - Lithium Polymer Battery o Electric Battery Car Competition Rules ______________________________ ______________ Coach Signature Date Name of School: ____________________________________________ Name of Coach (Please Print): ________________________________ Coach's Email Address: ______________________________________ Please sign this form and either mail, fax or e-mail a pdf to the National Renewable Energy Laboratory: National Renewable Energy Laboratory

19

PART I  

NLE Websites -- All DOE Office Websites (Extended Search)

i PART I SECTION G CONTRACT ADMINISTRATION DATA TABLE OF CONTENTS PAGE NO. G.1- DOE CONTRACTING OFFICER G-1 G.2 - DOE CONTRACTING OFFICER'S REPRESENTATIVE (COR) G-1 G.3 - CONTRACT...

20

order form  

NLE Websites -- All DOE Office Websites (Extended Search)

Customer Order Form Customer Order Form Fermilab Education Office - Customer Order Form PO BOX 500, MS 777, Batavia, IL 60510 * ph. 630-840-8258 * fax 630-840-2500 * avarry@fnal.gov Date: This order be: SHIPPED PICKED UP? Bill to: Ship to: Contact/Institution name: Email: Phone: Fax: Payment method (please circle): Visa/MasterCard - Check - Purchase Order  Visa/MasterCard # P.O. # Exp Date: Quantity Ordered Item Name Item Description (color, size, etc.) Price Each Total Amount  For purchases over $200 only *IL residents ONLY: Add 7.5% sales tax to your order.

Note: This page contains sample records for the topic "form 715-01 part" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Form Approved  

U.S. Energy Information Administration (EIA) Indexed Site

DISCLOSURE OF INFORMATION: The items RESPONDENT IDENTIFICATION Company Name and OTHER PARTY NAME (Item 1.A.), and SELLER'S NAME (Item 3.B.) on Form EIA-858 are DISCLOSURE OF INFORMATION: The items RESPONDENT IDENTIFICATION Company Name and OTHER PARTY NAME (Item 1.A.), and SELLER'S NAME (Item 3.B.) on Form EIA-858 are NOT considered confidential and may be publicly released in identifiable form. All other information you provide will be used for statistical purposes only. In accordance with the Confidential Information Protection provisions of Title V, Subtitle A of Public Law 107-347 and other applicable Federal laws, your responses will be kept confidential and will not be disclosed in identifiable form to anyone other than employees or agents without your consent. By law, every EIA employee, as well as every agent, is subject to a jail term, a fine of up to $250,000, or both if he or she discloses ANY identifiable information about you.

22

Registration Form  

NLE Websites -- All DOE Office Websites (Extended Search)

SNAP COLLABORATION MEETING JUNE 1 - 3, 2006 REGISTRATION FORM To register, please fill out the registration form below and click on the "SEND" button. Your registration will allow us to make security access and hospitality arrangements for you. Deadline: Please register NLT Wednesday, May 24, 2006. 1. Your Name (Last, First): 2. Your Institution: 3. Email address: 4. Citizenship (for non-DOE employees/guests): 5. Arrival date: 6. Departure Date: 7. Will you be attending the working dinner on Thursday, June 1? Yes No 8. Any dietary restrictions? Please click on the "Send" button below to email this form automatically to snap@lbl.gov. An automatic email reply receipt confirmation will be sent back to your email address. Send Reset Thank you!

23

PART I  

NLE Websites -- All DOE Office Websites (Extended Search)

DE-AC02-09CH11466 DE-AC02-09CH11466 Section D i PART I SECTION D PACKAGING AND MARKING TABLE OF CONTENTS PAGE NO. D.1 - PACKAGING D-1 D.2 - MARKING D-1 Contract No. DE-AC02-09CH11466 Section D D-1 PART I SECTION D - PACKAGING AND MARKING D.1 - PACKAGING Preservation, packaging, and packing for shipment or mailing of all work delivered hereunder shall be in accordance with good commercial practice and adequate to ensure acceptance by common carrier and safe transportation at the most economical rates. D.2 - MARKING Each package, report or other deliverable shall be accompanied by a letter or other document which: (a) Identifies the contract number under which the item is being delivered. (b) Identifies the contract requirement or other instruction which requires the

24

Form Date 4/4/01 Refrigerant Service Order Form  

E-Print Network (OSTI)

Recovery Unit ID # : Added Lbs oz Lbs oz Lbs oz Startup Charge Net Refrigerant Added: Lbs oz Parts UsedForm Date 4/4/01 Refrigerant Service Order Form Service ID: Owner: Work Order #: Building: Date: Issued: Completed: Equipment ID: Technicians: Location: Model: Manufact: Serial #: Refrigerant Type

Russell, Lynn

25

Certification reporting forms  

SciTech Connect

The required information and formats for the certification report including the cover sheet, compliance statement, and body of the report are given in this document. The body of the reports is different for each product. There are no product-to-product differences in the forms of the other parts of the reports. The products covered in this document include: furnaces, water heaters, refrigerator-freezers, central air conditioners, room air conditioners, and freezers.

Not Available

1981-02-18T23:59:59.000Z

26

Form1  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

B. U.S. DEPARTMENT OF ENERGY FORM 3304.2, B. U.S. DEPARTMENT OF ENERGY FORM 3304.2, APPROVAL OF EXPERT OR CONSULTANT EMPLOYMENT REQUEST U.S.DEPARTMENT OF ENERGY APPROVAL OF EXPERT OR CONSULTANT EMPLOYMENT REQUEST (Continued on Reverse) DOE F 3304.2 (01-07) 1. Name of Expert or Consultant: 2. Organization: 9. Current Employment (position, company, and location): 10. Home Address (city, state, and zip code): 11. Official Worksite (where services are to be performed): 12. APPROVALS 3. Action Requested: 4. Hourly Rate of Pay: 5. Nature of Appointment: 6. Period for Which Services Are Desired: 7. Estimated Number of Days to Be Worked: 8. Number of Days Worked Under Present Appointment: (Extension Only) 13. Description of Services Required: 14. Justification for this Expert/Consultant Action and Qualifications of Candidate Related to Need for Appointment:

27

Benefit Forms | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

New Employee Orientation » Benefit Forms New Employee Orientation » Benefit Forms Benefit Forms The employment and benefits forms that you will be asked to complete as part of this orientation program can be numerous. Each, however, serves an important purpose in ensuring proper recording of your employment and benefit elections. This online program is designed to make the task a little easier. Each set of forms that you will work with has been compiled to ensure that you are only completing the essential documentation for your individual employment circumstance. Also, each set begins with an Employee Information Form that, upon completion, will auto-populate applicable data throughout the entire package. All of the forms are in PDF format and require Acrobat Reader to view and fill-in. When you open the form "Packages," it will load in a separate

28

Gammasphere Checklist form  

NLE Websites -- All DOE Office Websites (Extended Search)

Gammasphere Checklist - Submission Form Gammasphere Checklist - Submission Form The use of the FMA and Gammasphere, combined or separately, can involve a number of detection systems and special features. The details of how the measurement will be done should be presented as part of the proposal. Some information on these systems is on the web at www.phy.anl.gov/gammasphere/aux/index.html. For assistance in preparing a proposal and for helping the Program Advisory Committee get a more accurate picture of what is planned, we ask you to use the checklist below. Please check the devices that will be needed for the proposed measurement, and include the checklist with your proposal. Note that some of the items are still under development - others may require considerable planning. Note also that a number of the 'primary' detectors (those that may be needed to

29

RCRA Hazardous Waste Part A Permit Application: Instructions...  

Open Energy Info (EERE)

Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: RCRA Hazardous Waste Part A Permit Application: Instructions and Form (EPA Form 8700-23) Abstract This...

30

APPENDIX A: Forms and Instructions Form Form R93D-44 Form R93D-03  

U.S. Energy Information Administration (EIA) Indexed Site

APPENDIX A: Forms and Instructions APPENDIX A: Forms and Instructions Form Form R93D-44 Form R93D-03 Form R93D-59 Instructions Form RT94-02 Form RT94-04 Form RT94-0! Form RT94-03 Form RT94-05 Form RT94-06 Instructions Form RT94-09 Instructions Form RT94-10 Form RT94-07 Form RT94-08 Form RT94-17 Form RT94-19 Form RT94-24 Form RT94-15 Form RT94-13 Form RT94-22 Form RT94-26 Form RT94-18 Form RT94-20 FormRT94-16 Form RT94-14 Form RT94-21 Form RT94-25 FormRT94-ll Form RT94-12 Form RT94-23 Form RT94-27 Section N (Vehicles) of 1993 RECS Questionnaire ............. Cover Letter for VIN Follow-up ........................... Vehicle Information Card (yellow, front only) ................. 1993 RECS Mail Questionnaire, Pages 4-5 (vehicle pages only) .... Instructions for Assembling RTECS Mid-Year Mailings ..........

31

Camps program WaIVEr Form partICIpant  

E-Print Network (OSTI)

____________________________ First name_________________ Home phone _________________ Work phone _________________ Cell phone _________________ Work phone _________________ Cell phone_________________ ParticiPant medical information BC care card_________________ Emergency contact: Last name____________________________ First name_________________ Home phone

Kavanagh, Karen L.

32

United States Atomic Energy Commission formed, part 2  

NLE Websites -- All DOE Office Websites (Extended Search)

As we continue looking at the transition of thinking that led to the United States Atomic Energy Commission and away from a United Nations Atomic Energy Commission, we see a move...

33

2014 Electricity Form Proposals  

NLE Websites -- All DOE Office Websites (Extended Search)

electricity data collection in 2014 via the following survey forms: Form EIA-63B, "Annual Photovoltaic CellModule Shipments Report" Form EIA-411, "Coordinated Bulk Power Supply...

34

Fixture for mounting small parts for processing  

DOE Patents (OSTI)

A fixture for mounting small parts, such as fusion target spheres or microelectronic components. A glass stalk is drawn and truncated near its tip. The truncated end of the glass stalk is dipped into silicone rubber forming an extending streamer. After the rubber cures for approximately 24 hours, a small part is touched to the streamer, and will be held securely throughout processing.

Foreman, Larry R. (2456 36th St., Los Alamos, NM 87544); Gomez, Veronica M. (Rte. 5 Box 283, Santa Fe, NM 87501); Thomas, Michael H. (Rte. 3-193-1, Espanola, NM 87532)

1990-01-01T23:59:59.000Z

35

Cost Accounting Standards Board Disclosure Statement (Form DS-2)  

E-Print Network (OSTI)

Cost Accounting Standards Board Disclosure Statement (Form DS-2) University of California, Irvine Revision Number 2, Effective Date April 1, 2012 #12;i COST ACCOUNTING STANDARDS BOARD DISCLOSURE STATEMENT AND CERTIFICATION C-1 Part I General Information I-1 Part II Direct Costs II-1 Part III Indirect Costs III-1 Part IV

Loudon, Catherine

36

Automated Part Tracking and Metrology Applied to a Manufacturing Process  

E-Print Network (OSTI)

This paper presents a case study in the design of an automated part tracking and metrology systems for an industrial manufacturing system. A major productivity challenge of this facility is managing each batch of parts as it is formed, treated...

Morelli, F.; Halbert, T.; Hignight, M.; Kell, Z.; Lacy, J.; Rasmussen, B. P.

2013-01-01T23:59:59.000Z

37

OCPR Forms | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Prevention and Resulution (OCPR) Forms Request for Mediation Intake Form Technology Transfer Reporting Form Mediation Survey Form Form Instructions: Fill out the form and...

38

Forms | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Forms Forms Forms DOE Forms are developed within the Department, and approved by the DOE Forms Manager. These forms are designed to obtain or provide structured information common to the needs of two or more DOE field or Headquarters organizations. All of the forms here are in Portable Document Format (PDF). Adobe Acrobat(R) Reader is needed to view and print the PDF files. Fillable forms, identified by the "fillable" icon, require a full version of Adobe Acrobat software. DOE Forms Forms by Subject Forms by Number Management & Administration 0000 - 1999 Legal 2000 - 2999 Personnel Management 3000 - 3999 Logistic Management 4000 - 4999 Program Planning & Management 5000 - 5999 HQ Forms HQ Forms are developed or managed by a Headquarters organization, and

39

Forms | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Forms Forms The following interactive Web-based forms in Adobe Acrobat Portable Document Format (PDF) are designed for online completion with Acrobat Reader 3.0 or above. Input...

40

Part removal of 3D printed parts  

E-Print Network (OSTI)

An experimental study was performed to understand the correlation between printing parameters in the FDM 3D printing process, and the force required to remove a part from the build platform of a 3D printing using a patent ...

Pea Doll, Mateo

2014-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "form 715-01 part" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

RMOTC - Library - Example Forms  

NLE Websites -- All DOE Office Websites (Extended Search)

Example Forms RMOTC will make every effort to provide the most current and correct information available. Please be aware that example forms are provided for informational purposes...

42

Student led part Introduction  

E-Print Network (OSTI)

Overview Student led part Introduction Mathematical Biology ­ Matrix Population Projection Models;Overview Student led part Introduction The second lecture focuses on matrix (P)opulation (P)rojection (M)odels­ Stuart Townley Math Bio ­ Matrix PPMs 2/ 5 #12;Overview Student led part Introduction The second lecture

Knobloch,Jürgen

43

SRS - Retiree Benefits - Forms  

NLE Websites -- All DOE Office Websites (Extended Search)

Forms Forms Medical Forms Return completed forms to: 5-200 Health Care Programs Enrollment Change Benefits Solutions Service Center Bldg 703-47A, Aiken, SC 29808 5-340 Medical Claim Form Claims Processing Center P.O. Box 100300, Columbia, SC 29202 -- Pharmacy Claim Form Caremark Prescription Drug Claim Processing Center, P.O. Box 52059, Phoenix, AZ 85072-2059 Dental Forms Return completed forms to: 5-200 Health Care Programs Enrollment Change Benefits Solutions Service Center Bldg 703-47A, Aiken, SC 29808 5-342 Dental Claim Form Claims Processing Center P.O. Box 100300, Columbia, SC 29202 Life Insurance Return completed forms to: 5-171 Contributory Group Life Application and Deduction Authorization Benefits Solutions Service Center Bldg 703-47A, Aiken, SC 29808

44

2014 Electricity Form Proposals  

U.S. Energy Information Administration (EIA) Indexed Site

Electricity and Renewable (Photovoltaic) Survey Form Changes Proposed for Electricity and Renewable (Photovoltaic) Survey Form Changes Proposed for 2014 The U.S. Energy Information Administration (EIA) is proposing changes to its electricity data collection in 2014. These changes involve the following surveys: Form EIA-63B, "Annual Photovoltaic Cell/Module Shipments Report," Form EIA-411, "Coordinated Bulk Power Supply Program Report," Form EIA-826, "Monthly Electric Utility Sales and Revenue Report with State Distributions," Form EIA-860, "Annual Electric Generator Report," Form EIA-860M, "Monthly Update to the Annual Electric Generator Report," Form EIA-861, "Annual Electric Power Industry Report," Form EIA-861S, "Annual Electric Power Industry Report (Short Form)," and

45

Form:SampleForm | Open Energy Information  

Open Energy Info (EERE)

SampleForm Jump to: navigation, search Input the name of a Test Page below. If the resource already exists, you will be able to edit its information. AddEdit a Test Page The text...

46

Spinor One-forms as Gravitational Potentials  

E-Print Network (OSTI)

General relativity is derived from an action which is quadratic in the covariant derivative of certain spinor one-form gravitational potentials. Either a pair of 2-component spinor one-forms or a single Dirac spinor one-form can be employed. The metric is a quadratic function of these spinor one-forms. In the 2-component spinor formulation the action differs from the usual chiral action for general relativity by a total differential. In the Dirac spinor formulation the action is the real part of the former one. The Hamiltonian is related to the ones in positive energy proofs and spinorial quasilocal mass constructions.

Roh Suan Tung; Ted Jacobson

1995-02-23T23:59:59.000Z

47

EIA Electric Power Forms  

Gasoline and Diesel Fuel Update (EIA)

Electric Power Forms Electric Power Forms EIA Electric Power Forms Listing of Publicly Available and Confidential Data EIA's statistical surveys encompass each significant electric supply and demand activity in the United States. Most of the electric power survey forms resulting data elements are published, but respondent confidentiality is required. The chart below shows the data elements for each survey form and how each data element is treated in regard to confidentiality. Data Categories Data collection forms EIA- 411 EIA- 826 EIA- 860 EIA- 860M EIA- 861 EIA- 923 Frame Information Utility identification and iocation -- -- -- -- X -- Plant identification and iocation -- -- -- X -- X Generation and fuel Latitude and longitude -- -- X -- -- --

48

Exercise Evaluation Forms  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Hazardous Materials Hazardous Materials Exercise Evaluation Forms Prepared for the Department of Energy Office of Transportation and Emergency Management 02B00215-09.p65 This page intentionally left blank table of contents Transportation Emergency Preparedness Program (TEPP) planning tools planning tools Hazar Hazar Hazar Hazar Hazardous Materials dous Materials dous Materials dous Materials dous Materials Ex Ex Ex Ex Exer er er er ercise Ev cise Ev cise Ev cise Ev cise Evaluation Forms aluation Forms aluation Forms aluation Forms aluation Forms Objective 1: Initial Notification of Response Agencies and Response Personnel ........................................................ 3 Objective 2: Direction and Control .............................................................. 5 Objective 3: Incident Assessment ................................................................ 6

49

2011Form EIA-902 Instructions  

U.S. Energy Information Administration (EIA) Indexed Site

FORM EIA-902 ANNUAL GEOTHERMAL HEAT PUMP SHIPMENTS REPORT GENERAL INFORMATION AND INSTRUCTIONS I. Purpose Form EIA-902 is designed to provide the data necessary for the U.S. Energy Information Administration (EIA), a part of the U.S. Department of Energy (DOE), to carry out its responsibilities tracking heat pump shipments in the geothermal heat pump industry and reporting information concerning the size and status of the industry. The data collected will be published in the Renewable Energy Annual and also be available through EIA's Internet site at http://www.eia.gov/fuelrenewable.html. II. Who Should Respond to This Survey This report is mandatory and required pursuant to the authority granted to the Department of Energy (DOE) by the Federal Energy Information Administration Act of 1974 (Public Law 93-

50

Fixture for mounting small parts for processing  

DOE Patents (OSTI)

A fixture for mounting small parts, such as fusion target spheres or microelectronic components is disclosed. A glass stalk is drawn and truncated near its tip. The truncated end of the glass stalk is dipped into silicone rubber forming an extending streamer. After the rubber cures for approximately 24 hours, a small part is touched to the streamer, and will be held securely throughout processing. 5 figs.

Foreman, L.R.; Gomez, V.M.; Thomas, M.H.

1990-05-29T23:59:59.000Z

51

FOIA Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

You are here: DOEID Home > FOIA > FOIA Request Form You are here: DOEID Home > FOIA > FOIA Request Form U.S. Department of Energy Idaho (DOE-ID) Operations Office Electronic FOIA Request Form* To make an Electronic FOIA (E-FOIA) request, please provide the information below. Failure to enter accurate and complete information may render your FOIA request impossible to fulfill. For individuals making a request for personal records under FOIA or the Privacy Act, please fill out the Privacy Act Request Form ( This link opens an 14 kb size Adobe Acrobat File 15 kb), print out the form and have your identity validated by having the form notarized and send the form to DOE-Idaho Privacy Officer, 1955 Freemont Avenue, Mail Stop 1203, Idaho Falls, ID 83405. * Requests submitted under the Privacy Act must be signed and, therefore, cannot be submitted on this form.

52

Introduction to differential forms  

E-Print Network (OSTI)

Dec 8, 2014 ... 6 Green's theorem for a rectangle. 8. 7 2-forms. 8. 8. Exactness in R3 and conservation of energy. 11. 9. d of a 2-form and divergence. 12.

2014-12-08T23:59:59.000Z

53

Standard Form 129  

Energy.gov (U.S. Department of Energy (DOE))

Form required to be filled out by companies applying to be added to the U.S. Department of Energy Qualified List of Energy Service Companies. This form must be completed and submitted with the Supplemental Questionnaire and Client Questionnaire.

54

ORSSAB Membership Application Form  

Energy.gov (U.S. Department of Energy (DOE))

Resident interested in joining the Oak Ridge Site Specific Advisory Board should complete and submit the included form.

55

Forming the Future  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

question," Johnson adds. Freeforming could be used for critical wind turbine or solar panel parts-even chemical processing or heat exchanger structures. "We're looking at...

56

Jordan Form Numerical. . .  

E-Print Network (OSTI)

Similarity Jordan Form Numerical. . . Applications Proofs Basis change A short proof Home Page, Alabama, USA Oct 3, 2007 Jordan Normal Form Revisited Speaker: Tin-Yau Tam Graduate Student Seminar tamtiny@auburn.edu #12;Similarity Jordan Form Numerical. . . Applications Proofs Basis change A short

Tam, Tin-Yau

57

Part B - Requirements & Funding Information PART B - Requirements...  

Office of Environmental Management (EM)

b. Part B 1 Part B - Requirements & Funding Information PART B - Requirements and Funding Information Gray highlights are instructions. Remove the instructions from the interagency...

58

Retirement Plaque Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Retirement Plaque Request Form Retirement Plaque Request Form Fill out a separate form for each plaque requested. Allow two weeks for delivery. If you have any questions, please call Rudy Bartolo, Retirement Plaque Coordinator at ext. 5558. FORM MUST BE SUBMITTED (mailed or faxed) in order for work to commence. Return form to Retirement Plaque Coordinator, Mailstop 77R0125, or fax 4993. Please Print Clearly Requester's Name:_______________________________ Extension:_______________ Mail Stop: ________________ Today's date:__________________ With Frame _____ Without Frame_____ Date Needed: ________________________ Full name as it is to appear on plaque:_________________________________________ Number of years employed at Lab:______________ Beginning and ending dates of employment: ____________________________________

59

NEO - Forms Checklist  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

/4/2007; please do not use older versions /4/2007; please do not use older versions Office of Human Capital Management U.S. Department of Energy New Employee Orientation FORMS CHECKLIST EOD Date: _________________ Employee Name: ________________________ Organization: ____________________________ HR Specialist: ___________________________ Telephone Number: _______________________ Admin Contact: __________________________ Telephone Number: _______________________ New Employee Orientation Forms to be issued and collected HR Orientation Team: FORM COMPLETE & SIGNED FORM NAME AND NUMBER YES NO Comments 1. Photo ID 2. Passport; Birth Certificate; or U.S. Citizenship documentation 3. Job Offer Letter Bring on 1 st Day 4. Employment & Benefits Forms listed below

60

2013 Electricity Form Proposals  

U.S. Energy Information Administration (EIA) Indexed Site

Electricity Survey Form Changes in 2013 The U.S. Energy Information Administration (EIA) proposed changes to its electricity data collection in 2013. These changes involve three forms: Form EIA-861, "Annual Electric Power Industry Report" The addition of a new form, the Form EIA-861S, "Annual Electric Power Industry Report (Short Form)" Form EIA-923, "Power Plant Operations Report." The proposals were initially announced to the public via a Federal Register Notice published March 15, 2012. Comments regarding this proposed information collection were due by May 14, 2012. EIA reviewed all comments and made several revisions to the proposals as a result. A second Federal Register Notice was published on August 30, 2012. It outlined the proposals

Note: This page contains sample records for the topic "form 715-01 part" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Methods of forming steel  

DOE Patents (OSTI)

In one aspect, the invention encompasses a method of forming a steel. A metallic glass is formed and at least a portion of the glass is converted to a crystalline steel material having a nanocrystalline scale grain size. In another aspect, the invention encompasses another method of forming a steel. A molten alloy is formed and cooled the alloy at a rate which forms a metallic glass. The metallic glass is devitrified to convert the glass to a crystalline steel material having a nanocrystalline scale grain size. In yet another aspect, the invention encompasses another method of forming a steel. A first metallic glass steel substrate is provided, and a molten alloy is formed over the first metallic glass steel substrate to heat and devitrify at least some of the underlying metallic glass of the substrate.

Branagan, Daniel J. (Iona, ID); Burch, Joseph V. (Shelley, ID)

2001-01-01T23:59:59.000Z

62

Science Brief Submission Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Science Brief Submission Form Science Brief Submission Form Science Brief Submission Form Print Tuesday, 01 May 2007 00:00 Science Brief Guidelines and Submission Form Please fill out the form below to submit a Science Brief and send ONE image (may be a composite of up to four images) from your publication directly to us at alscommunications@lbl.gov. Please note: The image must be high resolution, and, if there is text on the image, it must be scalable. We will let you know as soon as it is posted! * Required Your Name * Your Email Address * Your Affiliation Title of Publication * Link to Publication (if available) Beamline(s) * Journal Citation * Description of Research * 200 word maximum Image Caption * 50 word maximum Submit Never submit passwords through Google Forms. Powered by Google Docs Report Abuse - Terms of Service - Additional Terms

63

Form EIA-767  

U.S. Energy Information Administration (EIA) Indexed Site

Form EIA-767 (2005) STEAM-ELECTRIC PLANT OPERATION AND DESIGN REPORT Form Approved OMB No. 1905-0129 Approval Expires: 11/30/2007 PURPOSE Form EIA-767 collects information annually from all U.S. plants with a total existing or planned organic-fueled or combustible renewable steam-electric unit that has a generator nameplate rating of 10 megawatts or larger. This report is used for economic analyses conducted by the Department of Energy. The data from this form appear in the Electric Power Annual and the Annual Energy Review. The data collected on this form are used to monitor the current status and trends in the electric power industry and to evaluate the future of the industry. REQUIRED RESPONDENTS A Form EIA-767 must be completed and filed for each existing, under-construction, or planned

64

FFSE Online Membership Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Form Form This form is for people who would like to join or renew membership in Fermilab Friends for Science Education. If you would like to donate to FFSE, but not become a member, please go to the Donation Form. If you are a teacher and would like a joint membership in ISTA and FFSE, use the ISTA/FFSE Form. This form functions like a conventional online shopping cart. You add items to the cart with the "Add to Cart" button and may confirm what is in your cart with the "View Cart" button. To add more items when viewing the cart, click "Continue Shopping." You can choose to contribute to any or all of the options. There are three possible items available to put in the cart. You will be directed further to complete the transaction as you check out.

65

Process / CI Form  

NLE Websites -- All DOE Office Websites (Extended Search)

6 Process / Continual Improvement Form 11_0119 Page 1 of 3 6 Process / Continual Improvement Form 11_0119 Page 1 of 3 EOTA - Business Form Document Title: Process / Continual Improvement Form Document Number: F-016 Rev 11_0119 Document Owner: Elizabeth Sousa Backup Owner: David Rocha Approver(s): Melissa Otero Parent Document: P-012, Process / Continual Improvement Notify of Changes: EOTA Employees Referenced Document(s): N/A F-016 Process / Continual Improvement Form 11_0119 Page 2 of 3 Revision History: Rev. Description of Change A Initial Release 08_0425 Corrected minor problems and updated revision number. 11_0119 Merged F-019 Improvement Opportunity Planning Worksheet into this document F-016 Process / Continual Improvement Form 11_0119 Page 3 of 3

66

Membership form 11  

NLE Websites -- All DOE Office Websites (Extended Search)

Join, renew or donate online at ed.fnal.gov/ffse or use this form. Join, renew or donate online at ed.fnal.gov/ffse or use this form. Fermilab Friends for Science Education Membership Form Membership Levels Director's Club: $1,000.00 Patron: $500.00 Sponsor: $250.00 Dual: $100.00 Regular: $50.00 Teacher: $10.00 Name:_____________________________________________________________________ Partner's Name:_____________________________________________________________ Address:___________________________________________________________________ City, State, Zip:_____________________________________________________________ Telephone:_______________________ E-mail:__________________________

67

2011 Form EIA-63B Instructions  

U.S. Energy Information Administration (EIA) Indexed Site

U. S. DEPARTMENT OF ENERGY Form Approved U.S. ENERGY INFORMATION ADMINISTRATION OMB No. 1905-0196 Washington, DC 20585 Expires: 12/31/2013 FORM EIA-63B ANNUAL PHOTOVOLTAIC CELL/MODULE SHIPMENTS REPORT GENERAL INFORMATION AND INSTRUCTIONS I. Purpose Form EIA-63B is designed to provide the data necessary for the U.S. Energy Information Administration (EIA), a part of the U.S. Department of Energy (DOE), to carry out its responsibilities tracking photovoltaic cell/module shipments in the photovoltaic industry and

68

Page 8, Benefit Forms  

NLE Websites -- All DOE Office Websites (Extended Search)

Election Form (Federal Employee Group Life Insurance) - 120 Kb - Allows an employee to elect or waive life insurance coverage. SF-2823 - Designation of Beneficiary (Federal...

69

2015 Electricity Form Proposals  

Annual Energy Outlook 2012 (EIA)

include Congress, other government agencies, state governments, business and industry, private analysts and forecasters, and the general public. The proposed form was announced to...

70

Mentor Profile Form  

Energy.gov (U.S. Department of Energy (DOE))

The information you provide on this form will assist us in providing you with a list of prospective mentee from which to choose the most appropriate match.

71

Mentee Profile Form  

Energy.gov (U.S. Department of Energy (DOE))

The information you provide on this form will assist us in providing you with a list of prospective mentors from which to choose the most appropriate match.

72

Meson electromagnetic form factors  

E-Print Network (OSTI)

The electromagnetic structure of the pseudoscalar meson nonet is completely described by the sophisticated Unitary&Analytic model, respecting all known theoretical properties of the corresponding form factors.

Stanislav Dubnicka; Anna Z. Dubnickova

2012-10-23T23:59:59.000Z

73

CONFIGURATION CHANGE PROPOSAL FORM  

Energy.gov (U.S. Department of Energy (DOE))

This form is used for sharing information on Domain Name Server (DNS) changes, new requirements, modifications or enhancements within the DOE Headquarters Programmatic and Office Management Areas.

74

Hawaii Well Abandonment Report Form (DLNR Form WAR) | Open Energy...  

Open Energy Info (EERE)

LibraryAdd to library Form: Hawaii Well Abandonment Report Form (DLNR Form WAR) Abstract Completion of this form is required for well abandonment. Form Type ApplicationNotice...

75

Montana MPDES General Information Form (MDEQ Form 1) | Open Energy...  

Open Energy Info (EERE)

LibraryAdd to library Form: Montana MPDES General Information Form (MDEQ Form 1) Abstract Completion of form allows applicant to determine which other forms must be completed for...

76

H5Part at NERSC  

NLE Websites -- All DOE Office Websites (Extended Search)

H5Part H5Part Description and Overview H5Part is a simplified 'veneer' API that sits on top of HDF5 and supports several commonly used data models. The main components are: H5Part...

77

FORM EIA-28  

U.S. Energy Information Administration (EIA) Indexed Site

FORM EIA-28 - Financial Reporting System FORM EIA-28 - Financial Reporting System Sch 5111 Sch 5110 EIA-28 Financial Reporting System Sch 5100 -- Page 1 of 1 2010 Reporting Year January 2011 Instructions i Contents Updates to Instructions for Reporting Year 2009 ....................................................................................................................ii I. General Instructions ................................................................................................................................................................ 1 A. Purpose and Legislative Authority..................................................................................................................................... 1 B. Filing Requirements...........................................................................................................................................................

78

POSITION MANAGEMENT ACTION FORM  

E-Print Network (OSTI)

POSITION MANAGEMENT ACTION FORM Workforce Planning | 408-924-2250 classcomp@sjsu.edu SJSU Human FOR POSITION MANAGEMENT FORM Workforce Planning | 408-924-2250| classcomp@sjsu.edu SJSU Human Resources Revised contact your Workforce Planning Analyst. List the name of the position this position reports to

Eirinaki, Magdalini

79

Method of forming nanodielectrics  

DOE Patents (OSTI)

A method of making a nanoparticle filled dielectric material. The method includes mixing nanoparticle precursors with a polymer material and reacting the nanoparticle mixed with the polymer material to form nanoparticles dispersed within the polymer material to form a dielectric composite.

Tuncer, Enis [Knoxville, TN; Polyzos, Georgios [Oak Ridge, TN

2014-01-07T23:59:59.000Z

80

FFSE Online Membership Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Donation Form for FFSE Donation Form for FFSE This form is for people who would like like to donate to FFSE, but not become a member. If you would like to join or renew membership in Fermilab Friends for Science Education., please go to the Membership Form. You have three options for donating. A contribution to the general fund A contribution to the scholarship fund The purchase of a leaf for the Tree of Knowledge ($1,000) Use the tab key to go between text boxes; the keystrokes,"Return" and "Enter," have been disabled to avoid submitting the form prematurely. Donation to the General Fund PayPal - The safer, easier way to pay online! Contribution to Scholarship Fund The scholarship fund provides scholarships to: Schools to cover the cost of bus transportation to Fermilab for field trips. The cost averages about $100.

Note: This page contains sample records for the topic "form 715-01 part" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Method for forming materials  

DOE Patents (OSTI)

A material-forming tool and a method for forming a material are described including a shank portion; a shoulder portion that releasably engages the shank portion; a pin that releasably engages the shoulder portion, wherein the pin defines a passageway; and a source of a material coupled in material flowing relation relative to the pin and wherein the material-forming tool is utilized in methodology that includes providing a first material; providing a second material, and placing the second material into contact with the first material; and locally plastically deforming the first material with the material-forming tool so as mix the first material and second material together to form a resulting material having characteristics different from the respective first and second materials.

Tolle, Charles R. (Idaho Falls, ID); Clark, Denis E. (Idaho Falls, ID); Smartt, Herschel B. (Idaho Falls, ID); Miller, Karen S. (Idaho Falls, ID)

2009-10-06T23:59:59.000Z

82

Miscellaneous Waste-Form FEPs  

SciTech Connect

The US DOE must provide a reasonable assurance that the performance objectives for the Yucca Mountain Project (YMP) potential radioactive-waste repository can be achieved for a 10,000-year post-closure period. The guidance that mandates this direction is under the provisions of 10 CFR Part 63 and the US Department of Energy's ''Revised Interim Guidance Pending Issuance of New US Nuclear Regulatory Commission (NRC) Regulations (Revision 01, July 22, 1999), for Yucca Mountain, Nevada'' (Dyer 1999 and herein referred to as DOE's Interim Guidance). This assurance must be demonstrated in the form of a performance assessment that: (1) identifies the features, events, and processes (FEPs) that might affect the performance of the potential geologic repository; (2) examines the effects of such FEPs on the performance of the potential geologic repository; (3) estimates the expected annual dose to a specified receptor group; and (4) provides the technical basis for inclusion or exclusion of specific FEPs.

A. Schenker

2000-12-08T23:59:59.000Z

83

Form EIA-920 - 2005  

U.S. Energy Information Administration (EIA) Indexed Site

Administration Administration Form EIA-920 (2004/2005) COMBINED HEAT AND POWER PLANT REPORT INSTRUCTIONS Form Approval OMB No. 1905-0129 Approval Expires: 11/30/2007 PURPOSE Form EIA-920 Combined Heat and Power Plant Report collects information from combined heat and power (CHP) plants in the United States. Data collected on this form include electric power generation, fuel consumption, fuel heat content, and fossil fuel stocks. These data are used to monitor the status and trends of the electric power industry, and appear in many EIA publications, including: Electric Power Monthly and Annual, Monthly and Annual Energy Reviews, Natural Gas Monthly and Annual, Quarterly Coal Report, and the Renewable Energy Annual. Further information can be found at

84

Form EIA-861 Instructions  

U.S. Energy Information Administration (EIA) Indexed Site

ANNUAL ELECTRIC POWER ANNUAL ELECTRIC POWER INDUSTRY REPORT INSTRUCTIONS FORM EIA-861 OMB No. 1905-0129 Approval Expires: 12/31/2015 Burden: 9.0 hrs PURPOSE Form EIA-861 collects information on the status of electric power industry participants involved in the generation, transmission, and distribution of electric energy in the United States, its territories, and Puerto Rico. The data from this form are used to accurately maintain the EIA list of electric utilities, to draw samples for other electric power surveys, and to provide input for the following EIA reports: Electric Power Monthly, Monthly Energy Review, Electric Power Annual, Annual Energy Outlook, and Annual Energy Review. The data collected on this form are used to monitor the current status and trends of the electric power industry and to evaluate the future

85

ARM - VAP Suggestion Form  

NLE Websites -- All DOE Office Websites (Extended Search)

ProductsVAP Suggestion Form ProductsVAP Suggestion Form Showcase Data ARM Best Estimate Data Products (ARMBE) This is a collection of data products that represents "best estimates" derived from several instruments and/or VAPs. We are interested in your feedback; please contact us. VAP Update Information on new, existing, and future value-added products for July-September 2013 is now available. Have a VAP idea? Use this form to let us know. Datastream Status Further details on the status of VAPs being processed or developed, can be found at on the ARM Value-Added Product (VAP) Status web page. Use the Data File Inventory tool to view VAP data availability at the file level. Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send VAP Suggestion Form

86

PASS Form 22933  

NLE Websites -- All DOE Office Websites (Extended Search)

Private: The information contained on this form is considered private and for administrative use only. Do not copy or distribute. Private: The information contained on this form is considered private and for administrative use only. Do not copy or distribute. PASS Form Information Form: 22933 Title of Experiment: "Comparing Chlorpyrifos Levels in Commercial vs. Organic Parsley" Principal Investigator: Lucinda Hemmick Institution: Longwood Sr. High School Primary Field of Research: Environmental Sciences Type of Proposal: Rapid Access On-site Access: Experiment will be performed on-site, in person by the PI's experimenters. The PI (and approved experimenters) may also request remote computer access for operating equipment, data collection and retrieving data. Research Abstract of this experiment. This section will be used for funding agency reporting purposes. This information and the proposal title may become public information.:

87

SGP Shipment Notification Form  

NLE Websites -- All DOE Office Websites (Extended Search)

PlainsShipment Notification Form PlainsShipment Notification Form SGP Related Links Facilities and Instruments Central Facility Boundary Facility Extended Facility Intermediate Facility Radiometric Calibration Facility Geographic Information ES&H Guidance Statement Operations Science Field Campaigns Visiting the Site Fact Sheet Images Information for Guest Scientists Contacts Shipment Notification Form Note: Red text indicates a required field. Your Notification Form has been submitted. Section 1 : Initiator Information Date Afilliation Name Phone Number Email Section 2 : Vendor Information Ship From Point of Contact Address Phone Section 3 : Carrier Information Shipping Company Tracking/AWB Number Number of Boxes Approximate Weight for EACH BOX Expected Ship Date Section 4 : Shipment List Description System/Instrument

88

Forms of reinsurance  

Science Journals Connector (OSTI)

The main forms of reinsurance were briefly described in Chapter 3, the purpose of this chapter is to examine in more detail their characteristics, advantages and disadvantages. Then the following three chapter...

R. L. Carter

1983-01-01T23:59:59.000Z

89

Little Climates -- Part One  

NLE Websites -- All DOE Office Websites (Extended Search)

Part One Part One Nature Bulletin No. 478-A January 27, 1973 Forest Preserve District of Cook County George W. Dunne, President Roland F. Eisenbeis, Supt. of Conservation LITTLE CLIMATES -- Part One: Weather in the Soi. Climate vitally affects our lives. Wherever we live, climate has largely determined the plant and animal life in that region, the development of civilization there and what people do. The climate of any region represents its overall weather picture: the sum of its weather today, tomorrow, and during past centuries. We are accustomed to think of climate as a set of conditions occurring entirely in the atmosphere above the earth's surface, and it may sound silly when we say that there are climates underground -- little climates just as real as those above -- but it's true, There are special kinds of weather in the soil.

90

Vision-Based Convoy Forming for Mobile Robots  

Science Journals Connector (OSTI)

An approach is proposed to form a convoy of vehicles autonomously following a given path. Particularly, the part of the complex mobile robot guidance system related to leader-follower control ... is to use the lo...

Damian Kowalw; Maciej Patan

2014-01-01T23:59:59.000Z

91

Final Report -Public Part -  

E-Print Network (OSTI)

and Demonstration of SOFC Stacks PSO Project No. 2006-1-6385 (part 3) 01.03.2006-29.02.2008 Topsoe Fuel Cell A...................................................................................................8 3.1.2 Cost reductions and quality improvements in cell ands stack production ..................................................................................................................................................7 3.1 MATURING OF CELL AND STACK PRODUCTION TECHNOLOGY

92

Palladium as Catalyst in a Polycondensed Matrix, Part ii  

Science Journals Connector (OSTI)

In Part I of this series results on the formation of Pd-organic amine adducts, their polymerization, and the catalytic behavior of the catalyst formed were reported [1]. In the...2...adsorption measurements are d...

Jzsef Petr; Krisztina Lszl; Jnos T. Kiss

2001-05-01T23:59:59.000Z

93

Design Code Survey Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Design Code Survey Form Design Code Survey Form Design Code Survey Form Survey of Safety Software Used in Design of Structures, Systems, and Components 1. Introduction The Department's Implementation Plan for Software Quality Assurance (SQA) that was developed in response to Defense Nuclear Facilities Safety Board Recommendation 2002-01, Quality Assurance for Safety-Related Software, includes a commitment (4.2.1.5) to conduct a survey of design codes currently in use to determine if any should be included as part of the toolbox codes. Design Code Survey Form September 11, 2003 More Documents & Publications Technical Standards, Safety Analysis Toolbox Codes - November 2003 DOE G 414.1-4, Safety Software Guide for Use with 10 CFR 830 Subpart A, Quality Assurance Requirements, and DOE O 414.1C, Quality Assurance

94

Technology Transfer Reporting Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

form is to be completed by the TTO for individual inquiry/case activity during the quarter as required form is to be completed by the TTO for individual inquiry/case activity during the quarter as required by the Technology Transfer Commercialization Act of 2000. Mouse over definitions and descriptions appear over text/check boxes where appropriate. After completing this form, click on the submit button. *If you have no TTO activity for the quarter, please fill in your name, FY and quarter, lab or facility and check the box "No Quarterly Activity". Initial Ombuds Contact: ____________________ Type: Inquiry Case Ombuds Name: __________________________ Time Spent: (Hours) ______________ Final Ombuds Involvement: _________________ Laboratory or Facility: AMES ANL BNL LBNL INL KCP LANL NREL LLNL NBL NETL PNNL NNSS ORNL PXSO SRNL

95

User Financial Account Form  

NLE Websites -- All DOE Office Websites (Extended Search)

URA REVISED 2/20/13 URA REVISED 2/20/13 User Financial Account Form Establish a user financial account at SLAC to procure gases, chemicals, supplies or services to support your experiment at SLAC's user facilities and to send samples, dewars, or other equipment between SLAC and your institution. To open or renew your SLAC user financial account, complete and submit this form along with a Purchase Order (PO) from your institution. The PO should be made to SLAC National Accelerator Laboratory for the amount of estimated expenditures (the suggested minimum is $1,000). Send this form with the PO (or a letter from the financial officer of your institution) to: Jackie Kerlegan (SSRL) or Theresa Wong (LCLS) User Research Administration, MS 99 User Research Administration, MS 99 SLAC National Accelerator Laboratory

96

Compute Reservation Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Queue Look Queue Wait Times Hopper Queues and Policies Edison Queues and Policies Carver Queues and Policies Dirac Queues and Policies Compute Reservation Request Form Job Logs & Analytics Training & Tutorials Software Accounts & Allocations Policies Data Analytics & Visualization Data Management Policies Science Gateways User Surveys NERSC Users Group User Announcements Help Operations for: Passwords & Off-Hours Status 1-800-66-NERSC, option 1 or 510-486-6821 Account Support https://nim.nersc.gov accounts@nersc.gov 1-800-66-NERSC, option 2 or 510-486-8612 Consulting http://help.nersc.gov consult@nersc.gov 1-800-66-NERSC, option 3 or 510-486-8611 Home » For Users » Queues and Scheduling » Compute Reservation Request Form Compute Reservation Request Form

97

Travel Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Lodging Lodging Transportation SNAP COLLABORATION MEETING JUNE 1 - 3, 2006 TRAVEL FUNDING REQUEST FORM If you require Travel funding support from LBNL to attend the SNAP Collaboration Meeting, please fill out the travel request form below and click on the "SEND" button. As an alternative, you can simply email the requested information on the form to snap@lbl.gov Deadline: Please submit your request NLT Wednesday, May 10, 2006. Disclaimer: Please note that the submission of this request does not automatically constitute funding approval. 1. First Name Last Name 2. Has this travel funding support been pre-approved by the SNAP management? Yes No 3. If answer to #2 is "Yes": a) Approval by whom? b) What was the maximum reimbursement amount from SNAP?

98

Secretarial Award Nomination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Secretary's Awards Program Nomination Form Secretary's Awards Program Nomination Form 1. Type of Award (Check Applicable Box) Secretary's Honor Awards Secretary's Departure Awards Secretary's James R. Schlesinger Award Exceptional Service Award Appreciation Award Excellence Award Distinguished Service Award Achievement Award Meritorious Service Award 2. Nominee (Full) Name Check if Group list is attached (As it is to appear on the certificate) For Departure and Appreciation Awards Only 3. Certificate Date 4. Award Presentation Date 5. Current Position Title 6. Award Justification: Continue on blank sheet of paper and attach if you need more space. 7. Award Citation: A citation of no more than 20 lines must be attached to nomination form. 8 . Requesting Office : 9a. Local Approvals: One or more signatures is typical but not required

99

Form EIA-920 - 2005  

U.S. Energy Information Administration (EIA) Indexed Site

20 (2004/2005) 20 (2004/2005) |COMBINED HEAT AND POWER PLANT REPORT INSTRUCTIONS|Form Approval OMB No. 1905-0129 Approval Expires: 11/30/2007 | |PURPOSE|Form EIA-920 Combined Heat and Power Plant Report collects information from combined heat and power (CHP) plants in the United States. Data collected on this form include electric power generation, fuel consumption, fuel heat content, and fossil fuel stocks. These data are used to monitor the status and trends of the electric power industry, and appear in many EIA publications, including: Electric Power Monthly and Annual, Monthly and Annual Energy Reviews, Natural Gas Monthly and Annual, Quarterly Coal Report, and the Renewable Energy Annual. Further information can be found at

100

Research Input Form  

NLE Websites -- All DOE Office Websites (Extended Search)

HighlightsSubmit HighlightsSubmit Form Submit a New Research Highlight Sort Highlights Submitter Title Research Area Working Group Submission Date DOE Progress Reports Notable Research Findings for 2001-2006 Biological and Environmental Research Abstracts Database Research Highlights Summaries Research Highlight Submittal Form Tell us about your research! This form is designed to collect summary information about working group research results. If you have any questions or comments, please contact the administrators. Journal or Book Reference(s) (if applicable): Look Up Your reference from the Publications Database. Limit two references. If you have not submitted the references, please Add it now. Area of Research: Radiation Processes Cloud Distributions/Characterizations Surface Properties General Circulation and Single Column

Note: This page contains sample records for the topic "form 715-01 part" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

DOE FOIA Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Administration FOIA Request Form Administration FOIA Request Form To make an Electronic FOIA (E-FOIA) request, please provide the information below. Failure to enter accurate and complete information may render your FOIA request impossible to fulfill. * Requests submitted under the Privacy Act must be signed and, therefore, cannot be submitted on this form. Name: (Required) Organization: Address: (Required) Phone: FAX: Email: Reasonably Describe Records Describe the specific record (s) you seek with sufficient detail that a knowledgeable official of the activity may locate the record with a reasonable amount of effort. Such detail should include: dates, titles, file designations, and offices to be searched. Since most DOE records are not retained permanently, the more information that you provide, the better the opportunity there is to determine if the

102

Part B | Open Energy Information  

Open Energy Info (EERE)

Part BLegal Abstract RCRA Full Permit Part B, current through August 7, 2014. Published NA Year Signed or Took Effect 2014 Legal Citation RCRA Full Permit Part B (EPA 2014) DOI...

103

CAS marketing panel formed  

Science Journals Connector (OSTI)

CAS marketing panel formed ... A nine-member marketing panel has been formed as an adjunct to the Chemical Abstracts Service advisory board. ... In discussing the role of the panel, Philip K. Reily, director of the CAS marketing division, commented: "Marketing techniquesspecifically adapted to modern technical problems, well refined and developed, and skill-fully executedare the only effective way to insure that our chemical information services are going to be fully understood and widely utilized by chemists and chemical engineers all over the world." ...

1967-04-03T23:59:59.000Z

104

Draft ERUS 2014 OMB Supporting Statement, Part B  

Gasoline and Diesel Fuel Update (EIA)

NUMBER 1905-0129 SUPPORTING STATEMENT, PART B NUMBER 1905-0129 SUPPORTING STATEMENT, PART B i Supporting Statement for Survey Clearance: Electric Power and Renewable Surveys Part B: Collection of Information Employing Statistical Methods Assistant Administrator for Energy Statistics | Office of Electricity, Renewables & Uranium Statistics OMB Number 1905-0129 Independent Statistics & Analysis www.eia.gov U.S. Department of Energy Washington, DC 20585 FORM EIA-63B, Annual Photovoltaic Cell/Module Shipments Report FORM EIA-411, Coordinated Bulk Power Supply Program Report FORM EIA-826, Monthly Electric Utility Sales and Revenue Report with State Distributions FORM EIA-860, Annual Electric Generator Report FORM EIA-860M, Monthly Update to the Annual Electric Generator Report

105

Part A | Open Energy Information  

Open Energy Info (EERE)

Abstract RCRA Hazardous Waste Part A Permit Application, current through August 7, 2014. Published NA Year Signed or Took Effect 2014 Legal Citation RCRA Hazardous Waste Part...

106

Clause Matrix Part 1  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

23 23 K Clause Matrix for Department Of Energy Management and Operating Contracts Part I - FAR Clauses (Thru FAC 05-08 and DEAR Final Rule dated November 25, 2005) (1/10/2006) KEY: R = Required A = Required when applicable O = Optional M&O = Management and Operating contract UCF = Uniform Contract Format General instruction: Set forth below are clauses prescribed in FAR Part 52 (identified in the FAR Matrix for use in CR R&D, CR SVC, or CR CON contracts) which are to be used in DOE M&O contracts. This listing does not include solicitation provisions. FAR Clause Number Title Secondary DEAR Clause Citation M&O For Profit M&O Non- Profit UCF Prescribed In FAR Prescription/Notes 52.202-1 Definitions

107

Form EIA-871A  

U.S. Energy Information Administration (EIA) Indexed Site

Approval Approval OMB No.: 1905-0145 Expires: 11/30/2002 Form EIA-871A U.S. Department of Energy Commercial Buildings Energy Consumption Survey for 1999 BUILDING QUESTIONNAIRE TABLE OF CONTENTS About This Questionnaire ...................................................................................................... 3 Section A. Building Size and Age Square Footage .................................................................................................... 5 Floors .................................................................................................................... 8 Year Constructed .................................................................................................. 9 Section B. Principal Building Activity

108

Detecting alien life forms  

NLE Websites -- All DOE Office Websites (Extended Search)

Detecting alien life forms Detecting alien life forms Name: Brian S Foster Status: N/A Age: N/A Location: N/A Country: N/A Date: N/A Question: What would you do to find out if there is any life form on other planets? Replies: If you mean intelligent life, probably the best way would be to listen for radio messages, since you could do this from very far away. Earth emits as much radio energy as a small star --- very noticeable. If you mean just any kind of life it gets harder and you would have to send a robot or human in a spacecraft to visit. You could then look for the absorption of reflected light by oxygen molecules in the atmosphere. Oxygen is such a reactive molecule that it can only stay in the atmosphere if it is continually replenished by something, such as plants photosynthesizing. We cannot of course know that other life will build itself as does life on Earth, out of carbon-containing molecules which are formed by cracking apart carbon dioxide molecules with light energy (releasing oxygen). So the only sure way would probably be to land on the planet and look around. And even then you might well miss something

109

Apparatus for forming targets  

DOE Patents (OSTI)

Apparatus and method for cryoinduced uniform deposition of cryogenic materials, such as deuterium-tritium (DT) mixtures, on the inner surface of hollow spherical members, such as inertially imploded targets. By vaporizing and quickly refreezing cryogenic materials contained within a hollow spherical member, a uniform layer of the materials is formed on the inner surface of the spherical member. Heating of the cryogenic material, located within a non-isothermal compact freezing cell, is accomplished by an electrical heat pulse, whereafter the material is quickly frozen forming a uniform layer on the inner surface of the spherical member. The method is not restricted to producing a frozen layer on only the inner surface of the innermost hollow member, but where multiple concentric hollow spheres are involved, such as in multiple shell targets for lasers, electron beams, etc., layers of cryogenic material may also be formed on the inner surface of intermediate or outer spherical members, thus providing the capability of forming targets having multiple concentric layers or shells of frozen DT.

Woerner, Robert L. (Livermore, CA)

1980-01-01T23:59:59.000Z

110

STANDARD FORM NO. 64  

Office of Legacy Management (LM)

/qz-5 /qz-5 STANDARD FORM NO. 64 rl . . .' . , G Ojice Memoawl crl LA STATES GOVER pi,+ ip; ; / (' , TO : F. M . Belmore, M remtor, Produution Division DATE: Deomnber FROM : R. F. Van Wy TV Mvision of Teohnioal Advisers SUBJECT: R?IQUEST FOR&m SYMBOL: TA:RFV:rle For use under ooxrkraot AT-300l=Gen-72 at Columibia University, m request 6 pieoes Of A toleranoe of plus ordinary uranium out to the sizes listed below. or llliZlU8 l/16" i8 sati8faotory. P x 1u x 1" 1" x 1 !k x 1" tixl x1" 3P 4 x 12 x 1" ororr-se&ion of l;% x 1" are reque8ted, rq~are to 2" square are aomptable. Please 1. 1. Havena, Pupin Phy8ioe Laboratory, Columbia University, New York City. 2 pieoerr 2 piece8 2 pieoea 2 pieces Although pieces with a

111

Publication Submission Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Pages Pages publicationsubmission Sign In Launch the Developer Dashboard SLAC National Accelerator Laboratory DOE | Stanford | SLAC | SSRL | LCLS | AD | PPA | Photon Science | PULSE | SIMES LCLS : Linac Coherent Light Source An Office of Science User Facility Search this site... Search Help (new window) Top Link Bar LCLS Lasers Expand Lasers LCLS Quick Launch Home About LCLS Expand About LCLS LCLS News Expand LCLS News User Resources Expand User Resources Instruments Expand Instruments Proposals Publications Expand Publications Schedules Machine Status Machine FAQs Safety Organization Expand Organization Directories Expand Directories Staff Resources Contact Us All Site Content Department of Energy Page Content Publication Submission Form Th Tell LCLS about new publications Please submit this form to notify LCLS about new publications relating to

112

SAFETY SHOE ISSUANCE FORM  

NLE Websites -- All DOE Office Websites (Extended Search)

SAFETY SHOE ISSUANCE FORM SAFETY SHOE ISSUANCE FORM The employee named below is authorized to purchase one pair of protective footwear, rated by ASTM F 2413-05 (or ANSI Z41-1999) to protect against workplace hazards. The Laboratory will subsidize this protective footwear issuance up to the authorized annual limit of $150.00. □ The employee named below is authorized to purchase one pair of fatigue reducing shoe insoles. The Laboratory will subsidize this shoe insole issuance up to the authorized annual limit of $35.00. Note: Box must be checked to indicate supervisor approval of the purchase of fatigue reducing shoe insoles. Employee Name:__________________________ Project ID Number:__________ Employee ID Number:______________________ Payroll Deduction:___________

113

Fermilab Today - Announcements Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Announcements Form Announcements Form Subscribe | Contact Us | Archive | Classifieds | Guidelines | Help Search GO Fermilab Announcements policy Announcements must be submitted no later than 12 p.m. (noon) the day before the desired run date. Last-minute announcements will be considered on a case-by-case basis. To place an urgent announcement into Fermilab Today, please contact the Office of Communication at (630) 840-3351. Announcements will run from the time they are submitted until the selected expiration date, which may be no later than one month after the submission date. Anyone who would like to run his or her announcement for longer than one month will need to resubmit the announcement after the first submission expires. Fermilab Today staff will feature as many headlines as space permits in Fermilab Today and link to the announcements on the Announcements webpage.

114

2008 Form 3468  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

545-0155 545-0155 Investment Credit Form 3468 ᮣ Attach to your tax return. See instructions. Attachment Sequence No. 52 Identifying number Name(s) shown on return 1 For Paperwork Reduction Act Notice, see instructions. Form 3468 (2008) c × 30% (.30) × 30% (.30) 5 Cat. No. 12276E If you are claiming the investment credit as a lessee based on a section 48(d) (as in effect on November 4, 1990) election, provide the following information. If you acquired more than one property as a lessee, attach a statement showing the information below. (99) Name of lessor $ $ b $ $ Department of the Treasury Internal Revenue Service 2 5a 5b 5c × $1,000 5d 5e × 30% (.30) × $3,000 Kilowatt capacity of property in f above ᮣ g h Enter the lesser of line 5f or 5g 3 4 2008

115

ORPS User Registration Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DEPARTMENT OF ENERGY DEPARTMENT OF ENERGY OPERATIONAL EVENT INFORMATION SYSTEMS REGISTRATION FORM User Registration For: ORPS SUBMIT TO: U.S. DOE: PHONE: 800-473-4375 HSS InfoCenter, HS-1.22, 270CC FAX: 301-903-9823 1000 Independence Ave., SW Washington, DC 20585-0270 (Type or Print) 1. Name__________________________________________________________________________Birth date_______/_______ (Last) (First) (Middle Initial) (Month) (Day) 2.JobTitle_______________________________________________________________________________________________ 3. Company Name________________________________________________________________________________________ 4. Address________________________________________________ Mail Stop______________________________________

116

LED Price Tracking Form  

Energy.gov (U.S. Department of Energy (DOE))

DOE intends to update the SSL Pricing and Efficacy Trend Analysis for Utility Program Planning report on an annual basis, but doing so requires that we have sufficient product and purchase data including acquisition date, purchase price, product category, and rated initial lumens. Those interested in helping collect this data are asked to use the LED Price Tracking FormMicrosoft Excel and follow the instructions for submitting data.

117

CHEMICAL UNIONS FORM ALLIANCE  

Science Journals Connector (OSTI)

CHEMICAL UNIONS FORM ALLIANCE ... The Paper, Allied-Industrial, Chemical & Energy "Workers International Union (PACE) and the United Steelworkers of America (USWA) are industrial unions that have similar histories and many chemical and petroleum industry members, say union officials. ... PACE has created strategic alliances with several companies, said PACE President Boydlfoung in a statement, adding that it made sense to try the same thing with other unions. ...

2004-03-15T23:59:59.000Z

118

How do viruses form?  

NLE Websites -- All DOE Office Websites (Extended Search)

How do viruses form? How do viruses form? Name: street Location: N/A Country: N/A Date: N/A Question: How do viruses form? Replies: Well, I'll assume you mean how they replicate, since they do not (as far as we know) arise from inorganic materials. Viruses are generally thought of as obligate parasites -- that is, they need the assistance of another organism for their survival. Depending on the type of virus you're looking at you'll see many different ways of accomplishing the same goal -- reproduction. In very general terms, then, a virus will attach itself to an appropriate host cell and insert it's genetic code into the DNA of the host, which then goes thorough it's normal routine of reading through its own code to synthesize proteins and enzymes, and in the process inadvertently replicates the strand of viral DNA (or RNA, depending), which codes for its own proteins and concentrates within the cell. At some point, the cell will not be able to support that many viral particles within it's membrane, and it will die, releasing thousands of new viral particles into the environment to do the dirty deed all over again.

119

_Part II - Contract Clauses  

National Nuclear Security Administration (NNSA)

M515 dated 9/9/13 M515 dated 9/9/13 Contract DE-AC04-94AL85000 Modification No. M202 Part II - Contract Clauses Section I TABLE OF CONTENTS 1. FAR 52.202-1 DEFINITIONS (JAN 2012) (REPLACED M473) ............................................................... 8 2. FAR 52.203-3 GRATUITIES (APR 1984)..................................................................................................... 8 3. FAR 52.203-5 COVENANT AGAINST CONTINGENT FEES (APR 1984) ............................................. 9 4. FAR 52.203-6 RESTRICTIONS ON SUBCONTRACTOR SALES TO THE GOVERNMENT (SEP 2006) (REPLACED M264) ............................................................................................................................ 10 5. FAR 52.203-7 ANTI-KICKBACK PROCEDURES (OCT 2010) (REPLACED M443) ......................... 10

120

2011 Form EIA-63A Instructions  

U.S. Energy Information Administration (EIA) Indexed Site

U. S. DEPARTMENT OF ENERGY U. S. DEPARTMENT OF ENERGY Form Approved U.S. ENERGY INFORMATION ADMINISTRATION OMB No. 1905-0196 Washington, DC 20585 Expires: 12/31/2013 FORM EIA-63A ANNUAL SOLAR THERMAL COLLECTOR/REFLECTOR SHIPMENTS REPORT GENERAL INFORMATION AND INSTRUCTIONS I. Purpose Form EIA-63A is designed to provide the data necessary for the U.S. Energy Information Administration (EIA), a part of the U.S. Department of Energy (DOE), to carry out its responsibilities tracking collector/reflector shipments in the solar thermal industry and reporting information concerning the size and status of the industry. The data collected will be published in the Renewable Energy Annual and also be available through EIA's Internet site at http://www.eia.gov/fuelrenewable.html.

Note: This page contains sample records for the topic "form 715-01 part" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

The effects of deposit thermal history on microstructure produced by uniform droplet spray forming  

E-Print Network (OSTI)

Uniform droplet spray forming is a process aimed at producing near-net-shape parts directly from the liquid melt by spraying micron-sized droplets onto a movable target. In spray forming, the solidification rate of the ...

Cherng, Jean-Pei Jeanie

2002-01-01T23:59:59.000Z

122

FORM EIA-846(F)  

U.S. Energy Information Administration (EIA) Indexed Site

No. 1905-0169: Approval Expires March 31,1989 No. 1905-0169: Approval Expires March 31,1989 FORM EIA-846(F) (6-S-86) U.S. DEPARTMENT OF COMMERCE .(djSS^X BUREAU OF THE CENSUS ^p^TlJ^v ACTING AS COLLECTING AND COMPILING AGENT FOR / NOTICE - Response to this inquiry is required by lew (Federal Energy Administration Act of 1 974, as amended, P.L. 93-275). By Section 9 of Title 1 3, U.S. Code, your report to the Census Bureau is

123

HDOT Forms | Open Energy Information  

Open Energy Info (EERE)

HDOT Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: HDOT FormsLegal Abstract The State of Hawaii Forms Central webpage...

124

_PART I - THE SCHEDULE  

National Nuclear Security Administration (NNSA)

15 dated 9/9/13 Contract No. DE-AC04-94AL85000 15 dated 9/9/13 Contract No. DE-AC04-94AL85000 Modification No. M202 Part I - The Schedule Sections B through H TABLE OF CONTENTS B-1 SERVICES BEING ACQUIRED ...................................................................................... 4 B-2 CONTRACT TYPE AND VALUE (Rev. M218, M222, M236, M241, M261, M266, M288, M293, M312, M319, M344, M365, M400, M404, M443, M448, M473, M484, M0512, A0514) ............................................................................................................................ 4 B-3 AVAILABILITY OF APPROPRIATED FUNDS ................................................................. 8 B-9999 AMERICAN RECOVERY AND REINVESTMENT ACT WORK VALUES (Added M331; Modified: A335, A336, A340, A341, A342, A346, A347, A348, A349, A350,

125

Ex Parte Memorandum  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Tuesday, April 10, 2012, members of the Office of Security Policy and Office of Tuesday, April 10, 2012, members of the Office of Security Policy and Office of Physical Protection, both within the Department of Energy's Office of Health, Safety and Security, met with members of senior management team from the contractor providing protective force services for the Department of Energy Headquarters Forrestal and Germantown buildings. Participants to the meeting were as follows: Bill Dwyer, DOE Office of Physical Protection John Cronin, DOE Office of Security Policy Dave Dietz, DOE Office of Security Policy Mark Jamsay, Paragon Technical Services Terry Cuba, Paragon Technical Services DOE staff provided opening remarks. DOE noted that since the public comment period for the proposed amendments to 10 CFR Part 1046 is still open, areas of specific concern

126

Part III - Information Systems  

Science Journals Connector (OSTI)

Abstract This part enters into the main territory of enterprise architecture for information systems which is as rich in technology specialties as the IT ecosystem is diverse. Most organizations fail to recognize the need for diverse specialization within architecture because they fail to understand the depth of complexity and the costs associated with mediocrity within each area of specialization. They also believe that a general practioner, which we will call a solution architect, is qualified and appropriate to address the complexities across a wide array of technology areas. In reality, this is equivalent to staffing a medical center primarily with general practioners that act as the specialists. A healthy organization maintains top specialists with which the general practioners can participate in getting expertise that is in alignment with a future state vision that reduces complexity and costs.

James V. Luisi

2014-01-01T23:59:59.000Z

127

Ex Parte Memorandum  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Wednesday, March 14, 2012, members of the Protective Forces Career Options Wednesday, March 14, 2012, members of the Protective Forces Career Options Committee (PFCOC) met to discuss proposed changes to 10 CFR part 1046, which was published in the Federal Register on March 6, 2012 (77 FR 13206). 1 Participants to the meeting were as follows: Donald Barnes, DOE Office of Nuclear Energy Jason Brown, NCSP Oak Ridge John Cronin, DOE Office of Health, Safety and Security Jeffrey Cutler, Wohlner, Kaplon, Phillips, Young & Cutler (on behalf of NCSP) Dave Dietz, DOE Office of Health, Safety and Security Ken Freeman, DOE, Los Alamos National Laboratory Doug Fremont, DOE, National Nuclear Security Administration Steve Gibbs, WSI Rex A. Harding, NCSP, UPPSR Local 12S Martin Hewitt, NCSP, UPPSR Local 12S Rod Johnson, Pantex

128

SSRL29 Abstract Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Users are invited to submit abstracts highlighting research activities conducted over the past year at SSRL for oral or poster presentation at the meeting. Posters will be displayed throughout the meeting and will be highlighted during a poster session and reception on Monday, October 7. Graduate students submitting posters must also register for the Users' Meeting and are eligible for one of the poster prizes. All posters require submission of this form no later than September 23 to guarantee space and inclusion in the program materials. Users are invited to submit abstracts highlighting research activities conducted over the past year at SSRL for oral or poster presentation at the meeting. Posters will be displayed throughout the meeting and will be highlighted during a poster session and reception on Monday, October 7. Graduate students submitting posters must also register for the Users' Meeting and are eligible for one of the poster prizes. All posters require submission of this form no later than September 23 to guarantee space and inclusion in the program materials. Please Note: Fields marked with require entry. General Presentation Information Please select a presentation type: Oral Presentation Poster Presentation Invited Presentation: Users' Meeting Invited Presentation: Workshop Speaker

129

Bipolar pulse forming line  

DOE Patents (OSTI)

A bipolar pulse forming transmission line module for linear induction accelerators having first, second, third, fourth, and fifth planar conductors which form an interleaved stack with dielectric layers between the conductors. Each conductor has a first end, and a second end adjacent an acceleration axis. The first and second planar conductors are connected to each other at the second ends, the fourth and fifth planar conductors are connected to each other at the second ends, and the first and fifth planar conductors are connected to each other at the first ends via a shorting plate adjacent the first ends. The third planar conductor is electrically connectable to a high voltage source, and an internal switch functions to short a high voltage from the first end of the third planar conductor to the first end of the fourth planar conductor to produce a bipolar pulse at the acceleration axis with a zero net time integral. Improved access to the switch is enabled by an aperture through the shorting plate and the proximity of the aperture to the switch.

Rhodes, Mark A. (Pleasanton, CA)

2008-10-21T23:59:59.000Z

130

Form 1 | Open Energy Information  

Open Energy Info (EERE)

1Legal Abstract Form 1: General Information, current through August, 14, 2014. Published NA Year Signed or Took Effect 2014 Legal Citation Form 1: General Information DOI Not...

131

New Employee Orientation- Forms Checklist  

Energy.gov (U.S. Department of Energy (DOE))

Listing of the forms to be issued and collected at a new employee's orientation. Please review the checklist to ensure that you bring all of the needed forms.

132

ADOT Forms | Open Energy Information  

Open Energy Info (EERE)

ADOT FormsLegal Abstract The Arizona Department of Transportation provides various forms related to encroachment, including an application, guidance documents, and links to...

133

CSLC Forms | Open Energy Information  

Open Energy Info (EERE)

CSLC FormsLegal Abstract The California State Lands Commission (CSLC) provides various forms and information related to resource leasing for geothermal development. Published NA...

134

Form 200 | Open Energy Information  

Open Energy Info (EERE)

200Legal Abstract Form 200: ApplicationReport for Waste Discharge, current through August 14, 2014. Published NA Year Signed or Took Effect 1997 Legal Citation Form 200:...

135

Chevron, GE form Technology Alliance  

NLE Websites -- All DOE Office Websites (Extended Search)

Chevron, GE form Technology Alliance Chevron, GE form Technology Alliance The Chevron GE Technology Alliance will develop and commercialize valuable technologies to solve critical...

136

DOE F 13258e Etectromc Form Approved by Forms Mgml. 04119  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

e Etectromc Form Approved by Forms Mgml. 04119 e Etectromc Form Approved by Forms Mgml. 04119 12006 (08-89) United States Government Department of Energy Bonneville Power Administration memorandum DATE ; Cl 2 7 ZDac REPLY TO AnN OF: KEPR-Bell-l SUBJECT: Environmental Cleareance Memorandum TO : Larry Benzinger - TFSF-Bell Loren Cummings - TFSF-Bell TLM Foreman III TLM Foreman I Proposed Action: Construct landings and access roads in support of wood pole replacement activities along the Spirit Tap to Colville-Boundary #1 Transmission Line . PP&A Project No.: PP&A 1267 Budget Information: WO# 188846 Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B1.3 Routine maintenance/custodial services for buildings, structures , infrastructures (e .g., pathways, roads, and railroad s) and equipment

137

FORM EIA-846C  

U.S. Energy Information Administration (EIA) Indexed Site

No. 1905-0169: Approval Expires 04/30/91 No. 1905-0169: Approval Expires 04/30/91 FORM EIA-846C (5-1 89) U.S. DEPARTMENT Of COMMERCE BUREAU OF THE CENSUS ACTING AS COLLECTING AND COMPILING AGENT FOR UNITED STATES DEPARTMENT OF ENERGY ENERGY INFORMATION ADMINISTRATION Public reporting burden for this collection of information is estimated to average 8 hours per response, including the time of reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to the Energy Information Administration, Office of Statistical Standards, El-73, Mail Station: 1H-023 Forrestal, 1000 Independence Avenue, SW, Washington, DC 20485; and to the Office of Information and

138

Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

t t Categorical Exclusion Determination Form Proposed Action Title: (0471-1563) University of South Florida - Development of a Low Cost Thermal Energy Storage System Using Phase Change Materials with Enhanced Radiation Heat Transfer Program or Field Office: Advanced Research Projects Agency - Energy Location(s) (City/County/State): Tampa, FL Proposed Action Description: Funding will support development of low cost, industrially scalable capsules containing high-temperature phase change materials (PCMs) for use in thermal energy storage (TES) systems to enable continuous power supply from concentrated solar thermal and nuclear power plants. No nuclear research and development activities will take place under this project. ARPA-E has undertaken a review of the work to be performed

139

Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

n rgy n rgy Categorical Exclusion Determination Form Proposed Action Title: (0474-1555) University of Colorado - Boulder - Wafer-Level Sub-Module Integrated DCfDC Converter Program or Field Office: Advanced Research Projects Agency - Energy LocationCs) CCity/County/State): Colorado, Maine, Virginia Proposed Action Description: Funding will support development of a planar, wafer-level sub-module integrated converter (SubMIC) device that can be integrated into various types of photovoltaic (PV) modules to enable low-cost maximum power point tracking at high power processing efficiencies. Proposed work consists of indoor laboratory-based research and development (R&D), microfabrication activities, and analytical research, including: (1) simulated modeling and design of SubMIC components and integrated units, (2) development, fabrication, testing, and optimization

140

EOTA … Business Form  

NLE Websites -- All DOE Office Websites (Extended Search)

1 Internal Audit Report 11_0304 Page 1 of 3 1 Internal Audit Report 11_0304 Page 1 of 3 EOTA - Business Form Document Title: Internal Audit Report Document Number: F-011 Rev. 11_0304 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: P-007, Internal Audit Process Notify of Changes: Internal Auditors Referenced Document(s): N/A F-011 Internal Audit Report 11_0304 Page 2 of 3 Revision History: Rev. Description of Change A Initial Release 08_0502 Added "(PAR or IO may be required)" to Opportunity for Improvement section. 11_0304 Added Recommendation and Action Item Area F-011 Internal Audit Report 11_0304 Internal Audit Report Audit #: Lead Auditor: Audit Date: Audit Team: Document # Audited: Standard / Criteria Used:

Note: This page contains sample records for the topic "form 715-01 part" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Form EIA-861 Instructions  

U.S. Energy Information Administration (EIA) Indexed Site

ANNUAL ELECTRIC POWER ANNUAL ELECTRIC POWER INDUSTRY REPORT Form EIA-861 OMB No. 1905-0129 Approval Expires: 12/31/2015 Burden: 9 Hours NOTICE: This report is mandatory under the Federal Energy Administration Act of 1974 (Public Law 93-275). Failure to comply may result in criminal fines, civil penalties and other sanctions as provided by law. For further information concerning sanctions and data protections see the provisions on sanctions and the provisions concerning the confidentiality of information in the instructions. Title 18 U.S.C. 1001 makes it a criminal offense for any person knowingly and willingly to make to any Agency or Department of the United States any false, fictitious, or fraudulent statements as to any matter within its jurisdiction.

142

EOTA … Business Form  

NLE Websites -- All DOE Office Websites (Extended Search)

ISDF 042 Validation and Acceptance 11_0414 Page 1 of 4 ISDF 042 Validation and Acceptance 11_0414 Page 1 of 4 EOTA - Business Form Document Title: Validation and Acceptance Document Number: ISDF -042 Rev. 11_0414 Document Owner: Vickie Pleau Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: ISDP-002 Training Production Process Notify of Changes: MGT, ISD, QAM Referenced Document(s): ISDF-010 After Action Report ISDF 042 Validation and Acceptance 11_0414 Page 2 of 4 Revision History: Rev . Description of Change 10_0630 Initial Release 11_0414 Deleted FMT final Course Acceptance block ISDF 042 Validation and Acceptance 11_0414 Page 3 of 4 Course Validation and Acceptance Validation denotes the product meets customer operational expectations in the medium which it

143

EOTA … Business Form  

NLE Websites -- All DOE Office Websites (Extended Search)

4 New Employee Checklist 10_0806.docx Page 1 of 5 4 New Employee Checklist 10_0806.docx Page 1 of 5 EOTA - Business Form Document Title: New Employee Checklist Document Number: MGTF-004 Rev. 10_0806 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: MGTP-002, Skill Set / Training Process Notify of Changes: EOTA Managers Referenced Document(s): N/A MGTF-004 New Employee Checklist 10_0806.docx Page 2 of 5 Revision History: Rev. Description of Change A Initial Release B Changes made 2/28/08 08_0411 Added New Hire Orientation Course to checklist, added guidance for completion of checklist 09_0409 Updated "Responsible Person" on checklist. 09_0421 Added "Initiate/Update U.S. Access profile" as a new FMT responsibility. Renumbered checklist items.

144

SSRL28 Registration Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Need more information? Contact: Cathy Knotts Manager, URA SSRL, MS 99 2575 Sand Hill Road Menlo Park, CA 94025 28th Annual Stanford Synchrotron Radiation Laboratory Users' Meeting Menlo Park, California USA October 17-19, 2001 Registration Form -- CLOSED -- Full Name: Institution: Address: City: State: Zip Code: Country: Phone: Fax: E-mail: Citizenship: Registration: The Registration fee includes meeting materials, invited talks, poster presentations, and vendor exhibits. Registration ($150) Student Registration ($50) Users' Mtg. Invited Speaker Workshop Only (click here & see below) Meals and Social Events: Please specify quantity of tickets desired and if vegetarian meal preferred. Select 1-Regular 1-Vegetarian 2-Regular 2-Vegetarian 2-(1 of each) Lunch, Oct. 18 ($8 per person)

145

Form EIA-851Q  

U.S. Energy Information Administration (EIA) Indexed Site

ITEM 1: FACILITY INFORMATION ITEM 1: FACILITY INFORMATION Name: County: State: Owner: Type: Rated Capacity: Operating Status: ITEM 2: PRODUCTION Pounds U 3 O 8 October-2013 November-2013 December-2013 Total = 0.0 ITEM 3: PRODUCTION SOURCE Mine name(s) Pounds U 3 O 8 Other type: Pounds U 3 O 8 Total = 0.0 COMMENTS All other information you provide will be used for statistical purposes only. In accordance with the Confidential Information Protection provisions of Title V, Subtitle A of Public Law 107-347 and other applicable Federal laws, your responses will be kept confidential and will not be disclosed in identifiable form to anyone other than employees or agents without your consent. By law, every EIA employee, as well as every agent, is subject to a jail term, a fine of up to $250,000, or both if he or she discloses ANY identifiable

146

Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ergy ergy Categorical Exclusion Determination Form Proposed Action Title: (0472-1569) G~tomics - Double Sator Switched Reluctance Motor (DSSRM) Technology Progi'am or Field Office: Advanced Research Projects Agency - Energy Location(s) (City/County/State): San Diego, CA Proposed Action Description: General Atomics, in conjunction with the University of Texas-Dallas (UT Dallas), proposes to develop double-stator switched reluctance motor (DSSRM) for electric vehicles (EVs) that will eliminate the use of permanent magnet-based motors that rely on rare earth metals in EVs. General Atomics' application was selected for an initial 18-month period (Phase 1) of funding. The ARPA-E Program Director may decide to negotiate and fund project activities for an additional 18-month period (Phase II) after evaluating the work performed in Phase I. ARPA-E has not obligated

147

Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

y y Categorical Exclusion Determination Form Proposed Action Title: (0471-1595) Regents of the University of Minnesota - Thermal Fuel: Solar Fuels via Partial Redox Cycles with Heat Recovery Program or Field Office: Advanced Research Projects Agency - Energy LocationCs) CCity/County/State): Minnesota, California, and Colorado. Proposed Action Description: Funding will support development of a dual zone solar thermochemical reactor to produce fuel using ceria-based reactive materials in partial redox cycles and high heat recovery levels through counter-circulation of solid state components. Proposed work consists of indoor laboratory-based research and development, including: (1) designing, fabricating, and characterizing an optimized ceria-based reactive element for use in the reactor to enable maximum fuel productivity and durability; (2) designing and fabricating a

148

Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

of n y of n y Categorical Exclusion Determination Form Proposed Action Title: (0471-1607) University of Florida - Solar Thermochemical Fuel Production via a Novel Low Pressure, Magnetically Stabilized, Non-Volatile Iron Oxide Looping Process Program or Field Office: Advanced Research Projects Agency - Energy LocationCs) CCity/County/State): Gainesville, FL Proposed Action Description: University of Florida proposes to develop a novel solar thermochemical reactor with inputs of water, recycled carbon dioxide (C02), and concentrated solar energy to cost-effectively produce Syngas, a renewable, carbon-neutral fuel. Project activities will include: (1) modeling, design, and fabrication of a high efficiency 1 OkW reactor prototype; (2) test analysis of bench-scale

149

Part I, DAA Overview  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

AO Role-Based Training AO Role-Based Training Office of the Chief Information Officer Objectives Gain Understanding and Working Knowledge of: AO Authority, Role and Responsibilities AO Structure Key Cyber Security Terms Cyber Security Program Management Structure Policy Hierarchy Risk Management Framework and Certification & Accreditation Process Relationship Accreditation Forms, Boundaries, Common Controls and Inheritance AO C&A Package Review Accreditation Decision Continuous Monitoring Office of the Chief Information Officer Who is the AO? Authorizing Official (AO)  Senior DOE Managers are AOs by DOE Order  Can delegate AO authority to other Federal Employee(s)  Delegation must be in writing - by name or position  Delegated AO cannot re-delegate the authority  AO authority covers all Operating Units under his/her

150

Part I, DAA Overview  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

AODR Role-Based Training AODR Role-Based Training Office of the Chief Information Officer Objectives Gain Understanding and Working Knowledge of: AODR Authority, Role and Responsibilities Key Cyber Security Terms Cyber Security Program Management Structure Policy Hierarchy Risk Management Framework and Certification and Accreditation Process Relationship Pre-AO C&A Package Review Accreditation Forms, Boundaries and Common Controls and Inheritance Accreditation Decision and Package Transmission Continuous Monitoring Office of the Chief Information Officer Who is the AODR?  Authorizing Official Designated Representative (AODR)  AODRs are appointed by the AO  AODR function can be performed by AO  AODR role is not a required role by DOE Order or National policy  If AODR position is appointed it can be filled by one

151

Grouping Parts for Multiple Parts Production in Additive Manufacturing  

Science Journals Connector (OSTI)

Abstract Rapid prototyping (RP) has evolved to Additive Manufacturing (AM) in recent years. It can produce functional or end-use parts with small or even medium quantities. And further, due to its unique layer-by-layer construction principle, it can produce different parts at the same time in a same AM machine. To improve the productivity and machine utilization of AM processes under multiple parts production context, this paper propose the conception of Grouping parts. Based on the Group Technology (GT) used in traditional processing technologies, a modified Group Technology for AM under multiple parts manufacturing context is presented. To group parts, a set of key attributes affecting the AM production time, cost, quality and work preparation are identified to represent the parts, and then a Grey Clustering method is adopted to conduct the similarity analysis. A simple case study is presented in the end to illustrate the proposed conception and its methodology.

Yicha Zhang; Alain Bernard

2014-01-01T23:59:59.000Z

152

STEP Utility Data Release Form  

Energy.gov (U.S. Department of Energy (DOE))

STEP Utility Data Release Form, from the Tool Kit Framework: Small Town University Energy Program (STEP).

153

Classroom Projects -- Part One  

NLE Websites -- All DOE Office Websites (Extended Search)

One One Nature Bulletin No. 609 September 17, 1960 Forest Preserve District of Cook County Daniel Ryan, President Roberts Mann, Conservation Editor David H. Thompson, Senior Naturalist CLASSROOM PROJECTS -- PART ONE The essence, the fundamental purpose, of the outdoor education program conducted by our department is stated briefly in the introductory words of a book -- Natural Science Through the Seasons, by J. A. Partridge -- which we use and recommend for teachers: "To initiate children into the romance and wonder of science, and to enhance their natural desire to get to know the world around them and find an explanation of its phenomena. In this bulletin are a few examples of many projects that appeal to younsters and have proven successful in giving pupils more insight into their surroundings, including the flora and fauna, than can be obtained solely from books. These brief outlines are offered as starting points in areas of exploration and study. They may be supplemented by use of our nature bulletins, Partridge's book, the Golden Nature Guides, and publications by agencies such as the Illinois State Museum and the Illinois Office of Public Instruction.

154

HEART Reimbursement Act Form Mail completed form to  

E-Print Network (OSTI)

HEART Reimbursement Act Form Mail completed form to: Michigan State University MSU Human Resources Earnings Assistance and Relief (HEART) Act: If you are a member of a reserve component of the U.S. military

155

Contour forming of metals by laser peening  

DOE Patents (OSTI)

A method and apparatus are provided for forming shapes and contours in metal sections by generating laser induced compressive stress on the surface of the metal workpiece. The laser process can generate deep compressive stresses to shape even thick components without inducing unwanted tensile stress at the metal surface. The precision of the laser-induced stress enables exact prediction and subsequent contouring of parts. A light beam of 10 to 100 J/pulse is imaged to create an energy fluence of 60 to 200 J/cm.sup.2 on an absorptive layer applied over a metal surface. A tamping layer of water is flowed over the absorptive layer. The absorption of laser light causes a plasma to form and consequently creates a shock wave that induces a deep residual compressive stress into the metal. The metal responds to this residual stress by bending.

Hackel, Lloyd (Livermore, CA); Harris, Fritz (Rocklin, CA)

2002-01-01T23:59:59.000Z

156

Material forming apparatus using a directed droplet stream  

DOE Patents (OSTI)

Systems and methods are described for rapidly forming precision metallic and intermetallic alloy net shape parts directly from liquid metal droplets. A directed droplet deposition apparatus includes a crucible with an orifice for producing a jet of material, a jet destabilizer, a charging structure, a deflector system, and an impact zone. The systems and methods provide advantages in that fully dense, microstructurally controlled parts can be fabricated at moderate cost.

Holcomb, David E. (Oak Ridge, TN); Viswanathan, Srinath (Knoxville, TN); Blue, Craig A. (Knoxville, TN); Wilgen, John B. (Oak Ridge, TN)

2000-01-01T23:59:59.000Z

157

DOE Form 1322.4  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2.4 2.4 (09-98) All other editions are obsolete. Instructions: Forward completed checklist/approval form(s) to your organizational Forms Manager for review and coordination of approval. Forms are approved by HR-41. U.S. DEPARTMENT OF ENERGY FORMS CHECKLIST / APPROVAL I. ANALYSIS II. DESIGN, PRINTING AND STORAGE 1. TYPE OF FORM / REPORT 4. DATA COLLECTION 2. TITLE 5. Current Form No.: 6. Prescribing Directive: 3. FREQUENCY OF USE Single Daily Weekly Quarterly Monthly Annually Semi-Annually New Revision Cancellation Yes No 7. Purpose and content of form / report have been reviewed, and are reasonable and in keeping with the function of the originating organization. Y N 9. Format is arranged in effective manner with data elements in logical sequence according to workflow or types of source documents.

158

FAQs for Survey Forms 914  

Gasoline and Diesel Fuel Update (EIA)

company for Form EIA-914? Please inform us as soon as possible of any change in the name, phone number, email address, etc., of the contact person of your company for Form EIA-914....

159

NDSL Forms | Open Energy Information  

Open Energy Info (EERE)

NDSL Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: NDSL FormsLegal Abstract The Nevada Division of State Lands provides...

160

WSDNR Forms | Open Energy Information  

Open Energy Info (EERE)

WSDNR Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: WSDNR FormsLegal Abstract The Washington State Department of Natural...

Note: This page contains sample records for the topic "form 715-01 part" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

CSLB Forms | Open Energy Information  

Open Energy Info (EERE)

Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: CSLB FormsLegal Abstract The Colorado State Land Board (CSLB) provides various...

162

ESA Forms | Open Energy Information  

Open Energy Info (EERE)

ESA Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: ESA FormsLegal Published NA Year Signed or Took Effect 2014 Legal Citation...

163

Prioritization Tool Measurement Input Form  

Energy.gov (U.S. Department of Energy (DOE))

BTO encourages stakeholders to recommend updates and improvements to the Prioritization Tool by using the below Measure Input Form.

164

Boiler - tuning basics, part 1  

SciTech Connect

Tuning power plant controls takes nerves of steel and an intimate knowledge of plant systems gained only by experience. Tuning controls also requires equal parts art and science, which probably is why there are so few tuning experts in the power industry. In part 1 of a two-part series, the author explores a mix of the theoretical and practical aspects of tuning boiler control. 5 figs.

Leopold, T. [ABB Inc. (United States)

2009-03-15T23:59:59.000Z

165

Assessor Training NVLAP Assessment Forms  

E-Print Network (OSTI)

NVLAP Assessor Training NVLAP Assessment Forms #12;Assessor Training 2009: NVLAP Assessment Forms 2 Summary ·Test Method Review Summary ·ProgramSpecific Checklists Examples #12;Assessor Training 2009: NVLAP are completed · Assessor Names, Dates, Lab Code #12;Assessor Training 2009: NVLAP Assessment Forms 4 NIST

166

Method and tool for contracting tubular members by electro-hydraulic forming before hydroforming  

DOE Patents (OSTI)

A tubular preform is contracted in an electro-hydraulic forming operation. The tubular preform is wrapped with one or more coils of wire and placed in a chamber of an electro-hydraulic forming tool. The electro-hydraulic forming tool is discharged to form a compressed area on a portion of the tube. The tube is then placed in a hydroforming tool that expands the tubular preform to form a part.

Golovashchenko, Sergey Fedorovich (Beverly Hills, MI)

2011-03-15T23:59:59.000Z

167

Document Control Template-Form  

NLE Websites -- All DOE Office Websites (Extended Search)

7 Equipment Check-Out Form 08_0411 Page 1 of 3 7 Equipment Check-Out Form 08_0411 Page 1 of 3 EOTA - Business Form Document Title: Equipment Check-Out Form Document Number: MGTF-007 Rev. 08_0411 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: MGTP-003, Control of Customer Property Notify of Changes: MGT, ADM Referenced Document(s): N/A MGTF-007 Equipment Check-Out Form 08_0411 Page 2 of 3 Revision History: Rev. Description of Change A Initial Release 08_0411 Footer removed as document is for internal use only MGTF-007 Equipment Check-Out Form 08_0411 NATIONAL NUCLEAR SECURITY ADMINISTRATION Emergency Operations Training Academy EQUIPMENT CHECK-OUT FORM Name: Date taken:

168

Document Control Template-Form  

NLE Websites -- All DOE Office Websites (Extended Search)

2 Key Check-Out Form 10_0823 Page 1 of 3 2 Key Check-Out Form 10_0823 Page 1 of 3 EOTA - Business Form Document Title: Key Check-Out Form Document Number: MGTF-012 Rev. 10_0823 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: MGTP-003, Control of Customer Property Notify of Changes: MGT, ADM Referenced Document(s): N/A MGTF-012 Key Check-Out Form 10_0823 Page 2 of 3 Revision History: Rev. Description of Change 10_0823 Initial Release MGTF-012 Key Check-Out Form 10_0823 NATIONAL NUCLEAR SECURITY ADMINISTRATION Emergency Operations Training Academy Key Check-Out Form Name: Initial Suite Key: Date returned: Furniture Key: Date returned: Building Key: Date returned: Other Key(s): Date returned:

169

Technology Transfer Reporting Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Transfer Reporting Form Technology Transfer Reporting Form Technology Transfer Reporting Form More Documents & Publications Technology Partnership Ombudsman - Roles,...

170

The Majorana Parts Tracking Database  

E-Print Network (OSTI)

The Majorana Demonstrator is an ultra-low background physics experiment searching for the neutrinoless double beta decay of $^{76}$Ge. The Majorana Parts Tracking Database is used to record the history of components used in the construction of the Demonstrator. The tracking implementation takes a novel approach based on the schema-free database technology CouchDB. Transportation, storage, and processes undergone by parts such as machining or cleaning are linked to part records. Tracking parts provides a great logistics benefit and an important quality assurance reference during construction. In addition, the location history of parts provides an estimate of their exposure to cosmic radiation. A web application for data entry and a radiation exposure calculator have been developed as tools for achieving the extreme radio-purity required for this rare decay search.

Abgrall, N; Avignone, F T; Bertrand, F E; Brudanin, V; Busch, M; Byram, D; Caldwell, A S; Chan, Y-D; Christofferson, C D; Combs, D C; Cuesta, C; Detwiler, J A; Doe, P J; Efremenko, Yu; Egorov, V; Ejiri, H; Elliott, S R; Esterline, J; Fast, J E; Finnerty, P; Fraenkle, F M; Galindo-Uribarri, A; Giovanetti, G K; Goett, J; Green, M P; Gruszko, J; Guiseppe, V E; Gusev, K; Hallin, A L; Hazama, R; Hegai, A; Henning, R; Hoppe, E W; Howard, S; Howe, M A; Keeter, K J; Kidd, M F; Kochetov, O; Kouzes, R T; LaFerriere, B D; Leon, J Diaz; Leviner, L E; Loach, J C; MacMullin, J; Martin, R D; Meijer, S J; Mertens, S; Miller, M L; Mizouni, L; Nomachi, M; Orrell, J L; O'Shaughnessy, C; Overman, N R; Petersburg, R; Phillips, D G; Poon, A W P; Pushkin, K; Radford, D C; Rager, J; Rielage, K; Robertson, R G H; Romero-Romero, E; Ronquest, M C; Shanks, B; Shima, T; Shirchenko, M; Snavely, K J; Snyder, N; Soin, A; Suriano, A M; Tedeschi, D; Thompson, J; Timkin, V; Tornow, W; Trimble, J E; Varner, R L; Vasilyev, S; Vetter, K; Vorren, K; White, B R; Wilkerson, J F; Wiseman, C; Xu, W; Yakushev, E; Young, A R; Yu, C -H; Zhitnikov, I

2015-01-01T23:59:59.000Z

171

The Majorana Parts Tracking Database  

E-Print Network (OSTI)

The Majorana Demonstrator is an ultra-low background physics experiment searching for the neutrinoless double beta decay of $^{76}$Ge. The Majorana Parts Tracking Database is used to record the history of components used in the construction of the Demonstrator. The tracking implementation takes a novel approach based on the schema-free database technology CouchDB. Transportation, storage, and processes undergone by parts such as machining or cleaning are linked to part records. Tracking parts provides a great logistics benefit and an important quality assurance reference during construction. In addition, the location history of parts provides an estimate of their exposure to cosmic radiation. A web application for data entry and a radiation exposure calculator have been developed as tools for achieving the extreme radio-purity required for this rare decay search.

The Majorana Collaboration; N. Abgrall; E. Aguayo; F. T. Avignone III; A. S. Barabash; F. E. Bertrand; V. Brudanin; M. Busch; D. Byram; A. S. Caldwell; Y-D. Chan; C. D. Christofferson; D. C. Combs; C. Cuesta; J. A. Detwiler; P. J. Doe; Yu. Efremenko; V. Egorov; H. Ejiri; S. R. Elliott; J. Esterline; J. E. Fast; P. Finnerty; F. M. Fraenkle; A. Galindo-Uribarri; G. K. Giovanetti; J. Goett; M. P. Green; J. Gruszko; V. E. Guiseppe; K. Gusev; A. L. Hallin; R. Hazama; A. Hegai; R. Henning; E. W. Hoppe; S. Howard; M. A. Howe; K. J. Keeter; M. F. Kidd; O. Kochetov; S. I. Konovalov; R. T. Kouzes; B. D. LaFerriere; J. Diaz Leon; L. E. Leviner; J. C. Loach; J. MacMullin; R. D. Martin; S. J. Meijer; S. Mertens; M. L. Miller; L. Mizouni; M. Nomachi; J. L. Orrell; C. O'Shaughnessy; N. R. Overman; R. Petersburg; D. G. Phillips II; A. W. P. Poon; K. Pushkin; D. C. Radford; J. Rager; K. Rielage; R. G. H. Robertson; E. Romero-Romero; M. C. Ronquest; B. Shanks; T. Shima; M. Shirchenko; K. J. Snavely; N. Snyder; A. Soin; A. M. Suriano; D. Tedeschi; J. Thompson; V. Timkin; W. Tornow; J. E. Trimble; R. L. Varner; S. Vasilyev; K. Vetter; K. Vorren; B. R. White; J. F. Wilkerson; C. Wiseman; W. Xu; E. Yakushev; A. R. Young; C. -H. Yu; V. Yumatov; I. Zhitnikov

2015-02-05T23:59:59.000Z

172

Ex parte Communication | Department of Energy  

Energy Savers (EERE)

parte Communication Ex parte communication on AHAM's development of an ice maker energy test procedure Ex parte Communication More Documents & Publications Memorandum from VP...

173

Utah Antidegradation Review Form | Open Energy Information  

Open Energy Info (EERE)

Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: Utah Antidegradation Review Form Form Type ApplicationNotice Form Topic Antidegradation review...

174

Control of parts : parts making in the building industry  

E-Print Network (OSTI)

The thesis advances a diagramming tool called PAct. Each diagram is a model of a "value adding" enterprise, representing materials processing, parts manipulation and assembly, and the agents involved. Its purpose is to ...

Kendall, Stephen Holmes

1990-01-01T23:59:59.000Z

175

Seal for fluid forming tools  

DOE Patents (OSTI)

An electro-hydraulic forming tool for forming a sheet metal blank in a one-sided die has first and second rigid rings that engage opposite sides of a sheet metal blank. The rigid rings are contained within slots on a die portion and a hydraulic force applicator portion of the forming tool. The seals are either resiliently biased by an elastomeric member or inherently resiliently biased into contact with the blank.

Golovashchenko, Sergey Fedorovich (Beverly Hills, MI); Bonnen, John Joseph Francis (Milford, MI)

2012-03-20T23:59:59.000Z

176

Special Killing forms on toric Sasaki-Einstein manifolds  

E-Print Network (OSTI)

In this paper we study the interplay between complex coordinates on the Calabi-Yau metric cone and the special Killing forms on the toric Sasaki-Einstein manifold. In the general case we give a procedure to locally construct the special Killing forms. In the final part we exemplify the general scheme in the case of the $5-$dimensional $Y^{p,q}$ spaces, identifying the additional special Killing 2-forms which were previously obtained by the second author of the present paper, but with a different method, in [Mod. Phys. Lett. A 27 (2012) 1250217].

Vladimir Slesar; Mihai Visinescu; Gabriel Eduard Vilcu

2014-03-05T23:59:59.000Z

177

Better Plants Partnership Agreement Form  

Energy.gov (U.S. Department of Energy (DOE))

The Better Buildings, Better Plants Partnership Agreement Form commits organizations to work with DOE to reduce energy intensity by 25% over ten years.

178

Employee In-Processing Forms  

Energy.gov (U.S. Department of Energy (DOE))

Editable PDF in-processing forms which can be filled out by new employees prior to their first day of work

179

Contract Major Report Form Name __________________________  

E-Print Network (OSTI)

Contract Major Report Form 12/1/94 Name __________________________ Degree __________________________ College __________________________ Descriptive title of contract major _______________________________________________ Current GAP is ___________ in ___________________ hours attempted. Summary of Proposed contract Major 1

Kostic, Milivoje M.

180

Differential Form Valued Forms and Distributional Electromagnetic Sources  

E-Print Network (OSTI)

Properties of a fundamental double-form of bi-degree $(p,p)$ for $p\\ge 0$ are reviewed in order to establish a distributional framework for analysing equations of the form $$\\Delta \\Phi + \\lambda^2 \\Phi = {\\cal S} $$ where $\\Delta$ is the Hodge-de Rham operator on $p-$forms $ \\Phi $ on ${\\bf R}^3$. Particular attention is devoted to singular distributional solutions that arise when the source $ {\\cal S}$ is a singular $p-$form distribution. A constructive approach to Dirac distributions on (moving) submanifolds embedded in ${\\bf R}^3$ is developed in terms of (Leray) forms generated by the geometry of the embedding. This framework offers a useful tool in electromagnetic modeling where the possibly time dependent sources of certain physical attributes, such as electric charge, electric current and polarization or magnetization, are concentrated on localized regions in space.

Robin W Tucker

2008-12-10T23:59:59.000Z

Note: This page contains sample records for the topic "form 715-01 part" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

National Nuclear Security Administration Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Categorical Exclusion Determination Form Categorical Exclusion Determination Form NEPA ID#: Proposed Action Title: Program or Field Office: Location(s) (City/County/State): Proposed Action Description: Categorical Exclusion(s) Applied: For the complete DOE National Environmental Policy Act regulations regarding categorical exclusions, including the full text of each categorical exclusion, see Subpart D of 10 CFR Part 1021. Regulatory Requirements in 10 CFR 1021.410(b): (See full text in regulation) The proposal fits within a class of actions that is listed in Appendix A or B to 10 CFR Part 1021, Subpart D. To fit within the classes of actions listed in 10 CFR Part 1021, Subpart D, Appendix B, a proposal must be one that would not: (1) threaten

182

Plumbing Manufacturer's Institute Ex Parte Communication Regarding...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Plumbing Manufacturer's Institute Ex Parte Communication Regarding Showerheads Plumbing Manufacturer's Institute Ex Parte Communication Regarding Showerheads Letter to Department...

183

MATLAB: Introduction Part 1 Assignment  

E-Print Network (OSTI)

MATLAB: Introduction Part 1 ­ Assignment Bruno Abreu Calfa Assigned: September 8th , 2011 Due Calculate the value of the function y(x) = |x| sin x2 for values of x = 3 and 6 . Hint 1: Use the MATLAB

Grossmann, Ignacio E.

184

part5ug.pdf  

National Nuclear Security Administration (NNSA)

OF THE MODEL PART5 is a Fortran program for use in the analysis of the particulate air pollution impact of in-use gasoline-fueled and diesel-fueled motor vehicles which...

185

Project Approval Form Concentration in  

E-Print Network (OSTI)

Project Approval Form Concentration in Nanotechnology Return completed form to ENG Undergraduate Plan to complete the project as a requirement for the concentration in Nanotechnology. Depending upon project, you will need to submit a written summary of your work, signed (approved) by your project

Goldberg, Bennett

186

Method of forming ceramic bricks  

DOE Patents (OSTI)

A method for forming free standing ceramic bricks for use as tritium breeder material is disclosed. Aqueous solutions of sodium carbonate and potassium carbonate are mixed with an organic hydrocolloid dispersion and powdered lithium carbonate, spray dried, and ceramic bricks formed by molding in a die and firing.

Poeppel, R.B.; Claar, T.D.; Silkowski, P.

1987-04-22T23:59:59.000Z

187

2009 No part may be reproduced in any form without prior authorization.  

E-Print Network (OSTI)

/Tamper Detection 3. Comm. Protocol Security 4. Risk Mgmt. Enhancement 5. High Speed Encryption 1. Self Healing Grid authorization. Selfhealing "Smart" Grid (1998present) Building on the Foundation: · Anticipation of disruptive/or led at EPRI Enterprise Information Security (EIS) Infrastructure Security Initiative (ISI) Consortium

Amin, S. Massoud

188

Copyright 2009 No part of this presentation may be reproduced in any form without prior authorization.  

E-Print Network (OSTI)

Vehicles ­ Developing and Using Alternative Transportation Fuels · Greening the electric power supply University of Minnesota, St. Paul Student Center, Northstar Ballroom November 18, 2009 8:109:00 a.m. #12 Occurrences over 50,000* or more Consumers Data courtesy of NERC's Disturbance Analysis Working Group

Amin, S. Massoud

189

Form 2100 (4/12) Integrated Work Document (IWD) Part 1, Activity Specific Information  

E-Print Network (OSTI)

Measures, and Bounding Conditions Specify preventive measures, controls for each hazard (e.g., lockout

190

Copyright 2008 No part of this presentation may be reproduced in any form without prior authorization.  

E-Print Network (OSTI)

infrastructure supporting the digital society, a smart self-healing grid? Will today's electricity supply system supporting the digital society, a smart self-healing grid? #12;Increasing Demand for Security & Quality Data, File 206U, 01/03 #12;Dimensions of the Digital Society: Benefits Improved Energy Efficiency

Amin, S. Massoud

191

Procurement-Related Forms | Y-12 National Security Complex  

NLE Websites -- All DOE Office Websites (Extended Search)

Procurement-Related Forms Procurement-Related Forms Procurement-Related Forms The following procurement-related forms are provided in PDF fillable and/or Word format. Click the link in the "Format" column to open a copy of the form or right-click to download. To sort the table by UCN number or title, click the associated column heading. Number* Title/Description Format** UCN-04452S B&W Y-12 Subcontractor Personnel Exit Checklist PDF-fil UCN-6573 Subcontractor's Invoice for Travel and/or Services PDF-fil UCN-13816B Request for Waiver or Deviation Word UCN-13816C Request for Waiver or Deviation (Continued) Word UCN-20087A Suspect/Counterfeit Part Headmark List PDF UCN-20856 Nonpossessing Security Plan PDF-fil, Word UCN-21329 Subcontract Technical Representative (STR) Change Notice PDF-fil

192

Fire Protection Account Request Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fire Protection System Account Request Form Fire Protection System Account Request Form To obtain a user id and password to access the Fire Protection system, please complete the form, save the file and email it to hssUserSupport@hq.doe.gov or print and fax it to 301-903-9823. We will provide a username and password to new account holders. Please allow several business days to process your account request. When your request is approved, you will be contacted with your

193

HHS SMALL BUSINESS REVIEW FORM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE Form 4220.2 (Revised March 14 2013) DOE Form 4220.2 (Revised March 14 2013) Office of Small and Disadvantaged Business Utilization DOE F 4220.2 - Small Business Review Form (03/14/2013) OSDBU Control Number: _______________________________________Date Received: ______________________________ A. Project Information 1. Requisition Number: ________________________ Acquisition Instrument Proposed/Contract Type: [ ] Contract No (Mod): ______________________ [ ] Departmental IDIQ No: ___________________ [ ] GSA Schedule: _________________________ [ ] GWAC Contract: ________________________ [ ] DOE BPA:_____________________________ 2. Acquisition Office and Program Element: CO/CS Name: Contact Information (Telephone and E-mail): 3. Description of services or supplies:

194

Free form fabrication of thermoplastic composites  

SciTech Connect

This report describes the results of composites fabrication research sponsored by the Laboratory Directed Research and Development (LDRD) program at Sandia National Laboratories. They have developed, prototyped, and demonstrated the feasibility of a novel robotic technique for rapid fabrication of composite structures. Its chief innovation is that, unlike all other available fabrication methods, it does not require a mold. Instead, the structure is built patch by patch, using a rapidly reconfigurable forming surface, and a robot to position the evolving part. Both of these components are programmable, so only the control software needs to be changed to produce a new shape. Hence it should be possible to automatically program the system to produce a shape directly from an electronic model of it. It is therefore likely that the method will enable faster and less expensive fabrication of composites.

Kaufman, S.G.; Spletzer, B.L.; Guess, T.R.

1998-02-01T23:59:59.000Z

195

EIA-412 Form and Instructions  

U.S. Energy Information Administration (EIA) Indexed Site

12 (2003) |ANNUAL ELECTRIC INDUSTRY FINANCIAL REPORT |Form 12 (2003) |ANNUAL ELECTRIC INDUSTRY FINANCIAL REPORT |Form Approved OMB No. 1905-0129 Approval Expires 11/30/04 | | |GENERAL INFORMATION| |PURPOSE Form EIA-412 collects accounting, plant statistics, and transmission data from various electric industry entities in the United States. The data from this report appear in the following EIA publications: Financial Statistics of Major U.S. Publicly Owned Electric Utilities and Electric Power Annual. The data collected on this form are used to monitor the current status and trends of the electric power industry and to evaluate the future of the industry.| |REQUIRED RESPONDENTS The accounting data (Schedules 1 through 8) are to be completed by each municipality, political subdivision, State, and Federal entity engaged in the generation, transmission, or distribution of

196

Natural ventilation generates building form  

E-Print Network (OSTI)

Natural ventilation is an efficient design strategy for thermal comfort in hot and humid climates. The building forms can generate different pressures and temperatures to induce natural ventilation. This thesis develops a ...

Chen, Shaw-Bing

1996-01-01T23:59:59.000Z

197

Introduction to differential forms II  

E-Print Network (OSTI)

integrate a 2-form, one would have to sum up the integrals over each patch. ... field v which measures the velocity of the flow (e.g. the wind velocity). Then.

2005-01-05T23:59:59.000Z

198

EVALUATION FORM (Internal Libraries Document)  

E-Print Network (OSTI)

EVALUATION FORM (Internal Libraries Document) FACULTY MEMBER COMPLETES TOP Date: Rank/Title: Name, Research and Service, respectively for tenure track; 70%-10%-20% for non-tenure track) has been in effect

Stowell, Michael

199

Clinton forms sustainable development council  

Science Journals Connector (OSTI)

Clinton forms sustainable development council ... On June 14, the anniversary of the Earth Summit in Brazil, President Bill Clinton created a new White House advisory group called the President's Council on Sustainable Development. ...

BETTE HILEMAN

1993-06-21T23:59:59.000Z

200

Chevron, GE form Technology Alliance  

NLE Websites -- All DOE Office Websites (Extended Search)

Chevron, GE form Technology Alliance February 3, 2014 HOUSTON, TX, Feb. 3, 2014-Chevron Energy Technology Company and GE Oil & Gas announced today the creation of the Chevron GE...

Note: This page contains sample records for the topic "form 715-01 part" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Microsoft Word - PART 970.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PART 970 PART 970 - DOE MANAGEMENT AND OPERATING CONTRACTS Subpart 970.01 - Management and Operating Contract Regulatory System Sec. 970.0100 Scope of part. 970.0103 Publication and codification. Subpart 970.03 - Improper Business Practices and Personal Conflicts of Interest 970.0309 Whistleblower protection of contractor employees. 970.0309-1 Applicability. 970.0370 Management controls and improvements. 970.0370-1 Policy. 970.0370-2 Contract clause. 970.0371 Conduct of employees of DOE management and operating contractors. 970.0371-1 Scope of section. 970.0371-2 Applicability. 970.0371-3 Definition. 970.0371-4 Gratuities. 970.0371-5 Use of privileged information. 970.0371-6 Incompatibility between regular duties and private interests. 970.0371-7 Outside employment of contractor employees.

202

2014 Teacher Workshop Registration Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Teacher Workshop Registration Form Teacher Workshop Registration Form Workshop name and dates: (Please check those you want to attend; fees do not include Aurora University graduate credit.) Insects at Work in Our World: $110 June 19-20 Beauty and Charm at Fermilab: $275 July 14-18 Particles and Prairies: $275 July 21-25 Phriendly Physics: $275 July 28-August 1 The Prairie - Our Heartland: $175

203

Methods of forming hardened surfaces  

DOE Patents (OSTI)

The invention encompasses a method of forming a metallic coating. A metallic glass coating is formed over a metallic substrate. After formation of the coating, at least a portion of the metallic glass can be converted into a crystalline material having a nanocrystalline grain size. The invention also encompasses metallic coatings comprising metallic glass. Additionally, the invention encompasses metallic coatings comprising crystalline metallic material, with at least some of the crystalline metallic material having a nanocrystalline grain size.

Branagan, Daniel J. (Iona, ID)

2004-07-27T23:59:59.000Z

204

Sample Forms | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

NMMSS Information, Reports & Forms Sample Forms Sample Forms U.S. Department of Energy U.S. Nuclear Regulatory Commission Nuclear Materials Management & Safeguards...

205

Security Forms | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

NMMSS Information, Reports & Forms Security Forms Security Forms U.S. Department of Energy U.S. Nuclear Regulatory Commission Nuclear Materials Management & Safeguards...

206

CAIRS Registration Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

903-9823 CAIRS Registration Form More Documents & Publications ORPS User Registration Form Fire Protection System Account Request Form Brochure, Understanding UCNI - July 2010...

207

Category:RAPID Forms | Open Energy Information  

Open Energy Info (EERE)

RAPID Forms Jump to: navigation, search This category contains forms used to generate content within the RAPID toolkit. Pages in category "RAPID Forms" The following 13 pages are...

208

DOE Forms Management FAQ's | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

an existing form? The DOE Forms Management Program (OCIO, Office of IT Planning, Architecture and E-Government) provides assistance to DOE HQ and field elements with forms...

209

Better Buildings Residential Network Membership Form | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Network Membership Form Better Buildings Residential Network Membership Form Membership form from the U.S. Department of Energy's Better Buildings Residential Network Recommended...

210

Electromagnetic nucleon form factors in instant and point form  

E-Print Network (OSTI)

We present a study of the electromagnetic structure of the nucleons with constituent quark models in the framework of relativistic quantum mechanics. In particular, we address the construction of spectator-model currents in the instant and point forms. Corresponding results for the elastic nucleon electromagnetic form factors as well as charge radii and magnetic moments are presented. We also compare results obtained by different realistic nucleon wave functions stemming from alternative constituent quark models. Finally, we discuss the theoretical uncertainties that reside in the construction of spectator-model transition operators.

T. Melde; K. Berger; L. Canton; W. Plessas; R. F. Wagenbrunn

2007-09-30T23:59:59.000Z

211

Microsoft Word - SS Part A ERUS 2014 12 17 13.docx  

Gasoline and Diesel Fuel Update (EIA)

Supporting Statement for Survey Clearance: Supporting Statement for Survey Clearance: Electric Power & Renewable Electricity Surveys Part A: Justification Assistant Administrator for Energy Statistics | Office of Electricity, Renewables & Uranium Statistics OMB Number 1905-0129 Independent Statistics & Analysis www.eia.gov U.S. Department of Energy Washington, DC 20585 FORM EIA-63B, Annual Photovoltaic Cell/Module Shipments Report FORM EIA-411, Coordinated Bulk Power Supply Program Report FORM EIA-826, Monthly Electric Utility Sales and Revenue Report with State Distributions FORM EIA-860, Annual Electric Generator Report FORM EIA-860M, Monthly Update to the Annual Electric Generator Report FORM EIA-861, Annual Electric

212

The Theory of Functional Forms of the Consumer Demand System and its Application  

E-Print Network (OSTI)

This dissertation studies the consumer demand system focusing on its functional forms in the theoretical aspect and the empirical aspect. The theoretical part investigates the regularity property of the consumer demand ...

Usui, Ikuyasu

2010-01-25T23:59:59.000Z

213

Pipe line pigs have varied applications in operations. Part 2  

SciTech Connect

In the early days of pipelining, it was discovered that running a swab equipped with leather disks through the line removed paraffin deposited on the pipe wall increasing the flow without increasing the power input. Blades were added to the device later to improve the efficiency of wax removal, which also decreased the number of runs and the cost of pigging. Pig developers learned from their successes as well as their failures. Part 1 of this work focused on the construction and kaliper pigs, and the second part describes the general form and function of the different operational pigs, i.e., calipers, cleaners, and spheres.

Vernooy, B.

1980-10-01T23:59:59.000Z

214

Employee In-Processing Forms | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

New Employee Orientation » Employee In-Processing New Employee Orientation » Employee In-Processing Forms Employee In-Processing Forms The employment forms found in this section collect important and necessary information about you that will be used to verify your identity and eligibility for Federal Employment, capture all creditable Federal Service Time, establish direct deposit for salary payment, and enumerate exemptions for Federal and state Income Tax. SF-144 - Statement of Prior Federal Service - The information collected in this form is used to document all creditable time spent in Federal Service Employment (including Military, Part-time, and Seasonal). DOE F 1600.7 - Applicant Disability/Race/National Origin and Sex Identification - Identifies race and national origin for statistical purposes only; not filed in the Official Personnel Folder.

215

Microsoft Word - ORPS Facility Registration Form 20070109.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ORPS FACILITY REGISTRATION FORM ORPS FACILITY REGISTRATION FORM Submit completed form to: U.S. Department of Energy HSS InfoCenter, HS-1.22, 270CC 1000 Independence Ave., SW Washington, DC 20585-0270 FAX: 301-903-9823 PHONE: 800-473-4375 Note: * Only one facility per form * Type or print all entries 1. TYPE OF CHANGE Add a Facility (Complete Section 1.A, then go to Section 2) Change a Facility (Complete Section 1.B, then go to Section) Delete a Facility (Complete Section 1.C, then go to Section 2) A. Add a New Facility Use this section if you are adding a facility that has never submitted ORPS reports. If the new facility includes any part of a previously existing facility, a re-mapping plan of previously submitted ORPS Reports must be provided. DATA DESCRIPTION DATA LENGTH DATA INPUT

216

LFS Subcontract Form of Agreement  

NLE Websites -- All DOE Office Websites (Extended Search)

SFA (Rev. 5, 4/5/13) Subcontract Form of Agreement SFA (Rev. 5, 4/5/13) Subcontract Form of Agreement Dated 5-20-13 Subcontract No. 241314 Page 1 of 2 Subcontract Form of Agreement Subcontractor: TBD Subcontract No.: 241314 Address: * Contact: * Telephone: * Facsimile: * E-mail: * D-U-N-S No.: * NAICS Code: 334111 This subcontract, effective on the date of signature by the last party to sign, is hereby made and entered into by and between Los Alamos National Security, LLC (CONTRACTOR), and the above named SUBCONTRACTOR who hereby agree that all Work specified below, which is a portion of the goods and services to be provided by CONTRACTOR for the United States Department of Energy National Nuclear Security Administration (OWNER), shall be performed by the SUBCONTRACTOR in accordance with all

217

Microsoft Word - FORM46002.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

MANAGEMENT REPORTING MANAGEMENT REPORTING Progress Report Special Status Report SCIENTIFIC/TECHNICAL REPORTING (Reports/Products must be submitted with appropriate DOE F 241. The 241 forms are available at www.osti.gov/elink.) Report/Product Form Final Scientific/Technical Report DOE F 241.3 Conference papers/proceedings* DOE F 241.3 Software/Manual DOE F 241.4 Other (see special instructions) DOE F 241.3 * Scientific and technical conferences only FINANCIAL REPORTING SF-269, Financial Status Report SF-269A, Financial Status Report (Short Form) SF-272, Federal Cash Transactions Report CLOSEOUT REPORTING Patent Certification Property Certification Other (see Special Instructions) OTHER REPORTING Other (see Special Instructions)

218

DOE Headquarters FOIA Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Oak Ridge Office FOIA Request Form Oak Ridge Office FOIA Request Form To make an Electronic FOIA (E-FOIA) request, please provide the information below. Failure to enter accurate and complete information may render your FOIA request impossible to fulfill. * Requests submitted under the Privacy Act must be signed and, therefore, cannot be submitted on this form. Name: (Required) Organization: Address: (Required) Phone: FAX: Email: Reasonably Describe Records Describe the specific record (s) you seek with sufficient detail that a knowledgeable official of the activity may locate the record with a reasonable amount of effort. Such detail should include: dates, titles, file designations, and offices to be searched. Since most DOE records are not retained permanently, the more information that you provide, the better the opportunity there is to determine if the

219

EIA-412 Form and Instructions  

U.S. Energy Information Administration (EIA) Indexed Site

12 (2003) 12 (2003) ANNUAL ELECTRIC INDUSTRY FINANCIAL REPORT Form Approved OMB No. 1905-0129 Approval Expires 11/30/04 GENERAL INFORMATION PURPOSE Form EIA-412 collects accounting, plant statistics, and transmission data from various electric industry entities in the United States. The data from this report appear in the following EIA publications: Financial Statistics of Major U.S. Publicly Owned Electric Utilities and Electric Power Annual. The data collected on this form are used to monitor the current status and trends of the electric power industry and to evaluate the future of the industry. REQUIRED RESPONDENTS The accounting data (Schedules 1 through 8) are to be completed by each municipality, political subdivision, State, and Federal entity engaged in the generation,

220

Radiation Safety Work Control Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Radiation Safety Work Control Form Radiation Safety Work Control Form (see instructions on pg-2) Rev July-2012 Area: Form #: Date: Preliminary Applicability Screen: (a) Will closing the beam line injection stoppers mitigate the radiological hazards introduced by the proposed work? Yes No (b) Can the closed state of the beam line injection stoppers be assured during the proposed work (ie., work does NOT involve injection stoppers or associated HPS)? Yes No If the answers to both questions are yes, the work can be performed safely under an SSRL RSWCF. If the answer to either question is no, then the work must be performed under a SPEAR3 RSWCF. Section 1: Description of work to be done, including date and time. (Person Responsible completes section)

Note: This page contains sample records for the topic "form 715-01 part" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Progressive transitions using body part motion graphs  

Science Journals Connector (OSTI)

In this work we describe a preliminary method for progressive transitions in human locomotions. To achieve this, motion graphs have been used to synthesize body part transitions and every part has been synchronized with the other parts using time scaling. ...

Adso Fernndez-Baena; David Miralles

2011-12-01T23:59:59.000Z

222

Paperclips Etc. Special Order Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PSS-02.2 (March 7, 2011) Replaces PSS-02.1 PSS-02.2 (March 7, 2011) Replaces PSS-02.1 PAPERCLIPS Etc. SPECIAL Orders Form This form is used to order supplies that are not readily available in the DOE HQ self-service supply stores or for items that require approval by Office Management. All supplies ordered MUST be used for Official Government Business only. Requestor's Name: ___________________________________________________ Date: __________________ Phone Number: __________________ DOE ID Badge No.: ________________________________________ Catalog Name: ______________________________________________________ Org Code: ______________ Item Number Page # Item Description Quantity Store Use Only ALL printed names (legible), signatures and dates are required before your Special order is processed.

223

CONTACTS FOR INFORMATION MANAGEMENT: Forms, Information Collection...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CONTACTS FOR INFORMATION MANAGEMENT: Forms, Information Collection (PRA), & Records CONTACTS FOR INFORMATION MANAGEMENT: Forms, Information Collection (PRA), & Records Name Contact...

224

Group Study Room Policy and Reservation Form  

E-Print Network (OSTI)

to the Group Study Reservation Form. Fill out the web form and click "Send" to submit the request. A confirming

Reynolds, Albert C.

225

ACHRE Report: Part I Overview  

NLE Websites -- All DOE Office Websites (Extended Search)

Part I: Overview Part I: Overview When the Advisory Committee began work in April 1994 we were charged with determining whether "the [radiation] experiments' design and administration adequately met the ethical and scientific standards, including standards of informed consent, that prevailed at the time of the experiments and that exist today" and also to "determine the ethical and scientific standards and criteria by which it shall evaluate human radiation experiments." Although this charge seems straightforward, it is in fact difficult to determine what the appropriate standards should be for evaluating the conduct and policies of thirty or fifty years ago. First, we needed to determine the extent to which the standards of that time are similar to the standards of today. To the extent that there were differences we needed to determine the relative roles of each in making moral evaluations.

226

Geometric Qualification of Production Parts  

SciTech Connect

Computer Aided Design (CAD) is a commonly utilized software tool to conceptualize and create the part designs that are then used as input for product definition, or for the manufacture of production parts within commercial industry and, more specifically, at the Kansas City Plant (KCP). However, data created on CAD systems is, at times, unable to regenerate within the originating CAD system or be shared or translated for use by a dissimilar CAD system. Commercial software has been developed to help identify or qualify these difficulties that occur in the usage of this data. This project reviewed the different commercial software packages available for the activity of qualification and made recommendations for availability and use in the design processes at the KCP prior to the release of the product definition.

J. A. Bradley

2005-09-30T23:59:59.000Z

227

The Inconvenient Truth. Part 2  

SciTech Connect

Essay-type of publication on what should happen next after Al Gore's presentations on the Inconvenient Truth about the impacts of climate change. The essay states in the first lines: 'We've seen the movie, so we know the first part - we're in trouble deep. And it's time, past time, for at least some of us to go beyond warning to planning, to start talking seriously about a global crash program to stabilize the climate.

Athanasiou, T.

2007-01-15T23:59:59.000Z

228

Ocean Energy: Forms and Prospects  

Science Journals Connector (OSTI)

...greater working head. Turbine diameter is 5.35 m...expense, relatively short life, polarization problems...of about-22 C and a residual latent heat capacity of...expanding steam cannot form. Gas generation be-comes...1291, which has a half-life of 20 million years...

John D. Isaacs; Walter R. Schmitt

1980-01-18T23:59:59.000Z

229

Technetium Immobilization Forms Literature Survey  

SciTech Connect

Of the many radionuclides and contaminants in the tank wastes stored at the Hanford site, technetium-99 (99Tc) is one of the most challenging to effectively immobilize in a waste form for ultimate disposal. Within the Hanford Tank Waste Treatment and Immobilization Plant (WTP), the Tc will partition between both the high-level waste (HLW) and low-activity waste (LAW) fractions of the tank waste. The HLW fraction will be converted to a glass waste form in the HLW vitrification facility and the LAW fraction will be converted to another glass waste form in the LAW vitrification facility. In both vitrification facilities, the Tc is incorporated into the glass waste form but a significant fraction of the Tc volatilizes at the high glass-melting temperatures and is captured in the off-gas treatment systems at both facilities. The aqueous off-gas condensate solution containing the volatilized Tc is recycled and is added to the LAW glass melter feed. This recycle process is effective in increasing the loading of Tc in the LAW glass but it also disproportionally increases the sulfur and halides in the LAW melter feed which increases both the amount of LAW glass and either the duration of the LAW vitrification mission or the required supplemental LAW treatment capacity.

Westsik, Joseph H.; Cantrell, Kirk J.; Serne, R. Jeffrey; Qafoku, Nikolla

2014-05-01T23:59:59.000Z

230

Triggered pore-forming agents  

DOE Patents (OSTI)

An inactive pore-forming agent is revealed which is activated to lytic function by a condition such as pH, light, heat, reducing potential, or metal ion concentration, or substance such as a protease, at the surface of a cell. 30 figs.

Bayley, H.; Walker, B.J.; Chang, C.Y.; Niblack, B.; Panchal, R.

1998-07-07T23:59:59.000Z

231

Resources Abstracts Input Transaction Form  

E-Print Network (OSTI)

#12;Resources Abstracts Input Transaction Form 4. Title 5. Report Date 6.Urban Aquaculture Covered The University of the District of Columbia 12. Sponsoring Organization Water Resources Research of the rainbow trout (Salmo gairdneri) in a closed recycling water system in an urban environment is described

District of Columbia, University of the

232

NRC Transportation Security (Part 73 SNF Update and Part 37 Category...  

Office of Environmental Management (EM)

NRC Transportation Security (Part 73 SNF Update and Part 37 Category 1 and 2 Materials) NRC Transportation Security (Part 73 SNF Update and Part 37 Category 1 and 2 Materials) NRC...

233

A1. Form EIA-176 Figure Energy Information Administration  

Gasoline and Diesel Fuel Update (EIA)

Form EIA-176 Form EIA-176 Figure Energy Information Administration / Natural Gas Annual 1996 214 EIA-176, ANNUAL REPORT OF NATURAL AND SUPPLEMENTAL GAS SUPPLY AND DISPOSITION, 19 PART IV: SUPPLY OF NATURAL AND SUPPLEMENTAL GAS RECEIVED WITHIN OR TRANSPORTED INTO REPORT STATE RESPONDENT COPY Page 2 PART III: TYPE OF COMPANY AND GAS ACTIVITIES OPERATED IN THE REPORT STATE 1.0 Type of Company (check one) 1.0 Control No. 2.0 Company Name 3.0 Report State 4.0 Resubmittal EIA Date: a b c d e Investor owned distributor Municipally owned distributor Interstate pipeline Intrastate pipeline Storage operator f g h i j SNG plant operator Integrated oil and gas Producer Gatherer Processor k Other (specify) 2.0 Gas Activities Operated On-system Within the Report State (check all that apply) a b c d e Produced Natural Gas

234

National Nuclear Security Administration Categorical Exclusion Determination Form  

National Nuclear Security Administration (NNSA)

National Nuclear Security Administration National Nuclear Security Administration Categorical Exclusion Determination Form NEPA ID#: Proposed Action Title: Program or Field Office: Location(s) (City/County/State): Proposed Action Description: Categorical Exclusion(s) Applied: For the complete DOE National Environmental Policy Act regulations regarding categorical exclusions, including the full text of each categorical exclusion, see Subpart D of 10 CFR Part 1021. Regulatory Requirements in 10 CFR 1021.410(b): (See full text in regulation) The proposal fits within a class of actions that is listed in Appendix A or B to 10 CFR Part 1021, Subpart D. To fit within the classes of actions listed in 10 CFR Part 1021, Subpart D, Appendix B, a proposal must be one that would not: (1) threaten

235

Unsplit bipolar pulse forming line  

DOE Patents (OSTI)

A bipolar pulse forming transmission line module and system for linear induction accelerators having first, second, third, and fourth planar conductors which form a sequentially arranged interleaved stack having opposing first and second ends, with dielectric layers between the conductors. The first and second planar conductors are connected to each other at the first end, and the first and fourth planar conductors are connected to each other at the second end via a shorting plate. The third planar conductor is electrically connectable to a high voltage source, and an internal switch functions to short at the first end a high voltage from the third planar conductor to the fourth planar conductor to produce a bipolar pulse at the acceleration axis with a zero net time integral. Improved access to the switch is enabled by an aperture through the shorting plate and the proximity of the aperture to the switch.

Rhodes, Mark A. (Pleasanton, CA)

2011-05-24T23:59:59.000Z

236

DOE Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

U.S. Department of Energy Categorical Exclusion Determination Form Program or Field Office: Energy Efficiency and Conservation Block Grant Program Project Title CA-TRIBE-LOS COYOTES BAND OF CAHUILLA AND CUPENO INDIANS Location: Tribe CA-TRIBE-LOS COYOTES BAND OF CAHUILLA AND CUPENO INDIANS CA American Recovery and Reinvestment Act: Proposed Action or Project Description The Los Coyotes Band of Cahuilla and Cupeno Indians of California proposes to replace tribal members'

237

DOE Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

U.S. Department of Energy Categorical Exclusion Determination Form Program or Field Office: TRIBAL ENERGY PROGRAM Project Title SD-TEP-ROSEBUD SIOUX TRIBE Location: Tribal ROSEBUD SIOUX TRIBE SD American Recovery and Reinvestment Act: Proposed Action or Project Description The Rosebud Sioux Tribe (RST) and Citizens Wind propose to complete the required pre-construction activities necessary to secure funding for the proposed 190 MW North Antelope Highlands wind farm,

238

DOE Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

U.S. Department of Energy Categorical Exclusion Determination Form Program or Field Office: TRIBAL ENERGY PROGRAM NV Project Title NV-TEP-FALLON PAIUTE-SHOSHONE Location: Tribal FALLON PAIUTE-SHOSHONE American Recovery and Reinvestment Act: Proposed Action or Project Description The Fallon Paiute-Shoshone Tribe proposes to develop a sustainable energy park utilizing renewable energy resources at the Tribe's Reservation in Churchill County, Nevada. This proposed energy park

239

Precise Neutron Magnetic Form Factors  

E-Print Network (OSTI)

Precise data on the neutron magnetic form factor G_{mn} have been obtained with measurements of the ratio of cross sections of D(e,e'n) and D(e,e'p) up to momentum transfers of Q^2 = 0.9 (GeV/c)^2. Data with typical uncertainties of 1.5% are presented. These data allow for the first time to extract a precise value of the magnetic radius of the neutron.

G. Kubon; H. Anklin; P. Bartsch; D. Baumann; W. U. Boeglin; K. Bohinc; R. Boehm; C. Carasco; M. O. Distler; I. Ewald; J. Friedrich; J. M Friedrich; M. Hauger; A. Honegger; P. Jennewein; J. Jourdan; M. Kahrau; K. W. Krygier; A. Liesenfeld; H. Merkel; U. Mueller; R. Neuhausen; Ch. Normand; Th. Petitjean; Th. Pospischil; M. Potokar; D. Rohe; G. Rosner; H. Schmieden; I. Sick; S. Sirca; Ph. Trueb; A. Wagner; Th. Walcher; G. Warren; M. Weis; H. Woehrle; M. ZeierJ. Zhao; B. Zihlmann

2001-07-26T23:59:59.000Z

240

DOE Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

U.S. Department of Energy Categorical Exclusion Determination Form Program or Field Office: TRIBAL ENERGY PROGRAM OK Project Title OK-TEP-CHEROKEE NATION BUSINESSES Location: Tribal CHEROKEE NATION BUSINESSES American Recovery and Reinvestment Act: Proposed Action or Project Description The Cherokee Wind Energy Development proposed project is for development, design, and installation of a 127.5 megawatt wind farm to offset Tribal electrical load; sell excess electricity to local, regional, and

Note: This page contains sample records for the topic "form 715-01 part" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

EEO PRECOMPLAINT COUNSELING INTAKE FORM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NATIONAL ORIGIN (SPECIFY) SEX ( ) FEMALE ( ) MALE DISABILITY ( ) MENTAL ( ) PHYSICAL AGE (SPECIFY DATE OF BIRTH) REPRISAL (List prior EEO activity, case number if known, and date of activity) GENETIC INFORMATION PREGNANCY SEXUAL ORIENTATION STATUS AS A PARENT - 2 - ISSUE(S) IN THE COMPLAINT (CHECK APPROPRIATE BOX/BOXES) NONSELECTION AWARDS RETIREMENT DETAIL TIME AND ATTENDANCE SUSPENSION REASSIGNMENT SEPARATION/TERMINATION DUTY HOURS REPRIMAND PERFORMANCE APPRAISAL SEXUAL HARASSMENT ASSIGNMENT OF DUTIES WORK CONDITIONS OTHER (SPECIFY) PART 3. EVENT INFORMATION: PROVIDE A BRIEF DESCRIPTION OF EACH ALLEGED DISCRIMINATORY INCIDENT, INCLUDING THE SPECIFIC DATE OF THE INCIDENT,

242

EEO PRECOMPLAINT COUNSELING INTAKE FORM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NATIONAL ORIGIN (SPECIFY) NATIONAL ORIGIN (SPECIFY) SEX ( ) FEMALE ( ) MALE DISABILITY ( ) MENTAL ( ) PHYSICAL AGE (SPECIFY DATE OF BIRTH) REPRISAL (List prior EEO activity, case number if known, and date of activity) GENETIC INFORMATION PREGNANCY SEXUAL ORIENTATION STATUS AS A PARENT - 2 - ISSUE(S) IN THE COMPLAINT (CHECK APPROPRIATE BOX/BOXES) NONSELECTION AWARDS RETIREMENT DETAIL TIME AND ATTENDANCE SUSPENSION REASSIGNMENT SEPARATION/TERMINATION DUTY HOURS REPRIMAND PERFORMANCE APPRAISAL SEXUAL HARASSMENT ASSIGNMENT OF DUTIES WORK CONDITIONS OTHER (SPECIFY) PART 3. EVENT INFORMATION: PROVIDE A BRIEF DESCRIPTION OF EACH ALLEGED DISCRIMINATORY INCIDENT, INCLUDING THE SPECIFIC DATE OF THE INCIDENT,

243

Visualization of semileptonic form factors from lattice QCD  

SciTech Connect

Comparisons of lattice-QCD calculations of semileptonic form factors with experimental measurements often display two sets of points, one each for lattice QCD and experiment. Here we propose to display the output of a lattice-QCD analysis as a curve and error band. This is justified, because lattice-QCD results rely in part on fitting, both for the chiral extrapolation and to extend lattice-QCD data over the full physically allowed kinematic domain. To display an error band, correlations in the fit parameters must be taken into account. For the statistical error, the correlation comes from the fit. To illustrate how to address correlations in the systematic errors, we use the Becirevic-Kaidalov parametrization of the D{yields}{pi}l{nu} and D{yields}Kl{nu} form factors, and an analyticity-based fit for the B{yields}{pi}l{nu} form factor f{sub +}.

Bernard, C.; Laiho, J. [Department of Physics, Washington University, St. Louis, Missouri (United States); DeTar, C.; Levkova, L.; Oktay, M. B. [Physics Department, University of Utah, Salt Lake City, Utah (United States); Di Pierro, M. [School of Computer Science, Telecommunications and Information Systems, DePaul University, Chicago, Illinois (United States); El-Khadra, A. X.; Evans, R. T.; Gamiz, E. [Physics Department, University of Illinois, Urbana, Illinois (United States); Freeland, E. D. [Liberal Arts Department, The School of the Art Institute of Chicago, Chicago, Illinois (United States); Gottlieb, Steven [Department of Physics, Indiana University, Bloomington, Indiana (United States); Heller, U. M. [American Physical Society, Ridge, New York (United States); Hetrick, J. E. [Physics Department, University of the Pacific, Stockton, California (United States); Kronfeld, A. S.; Mackenzie, P. B.; Okamoto, M.; Simone, J. N. [Fermi National Accelerator Laboratory, Batavia, Illinois (United States); Sugar, R. [Department of Physics, University of California, Santa Barbara, California (United States); Toussaint, D. [Department of Physics, University of Arizona, Tucson, Arizona (United States); Van de Water, R. S. [Physics Department, Brookhaven National Laboratory, Upton, New York (United States)

2009-08-01T23:59:59.000Z

244

Nuclear mass form factors from coherent photoproduction of $?^0$ mesons  

E-Print Network (OSTI)

Data for coherent photoproduction of $\\pi^0$ mesons from nuclei ($^{12}$C, $^{40}$Ca, $^{93}$Nb, $^{nat}$Pb), recently measured with the TAPS detector at the Mainz MAMI accelerator, have been analyzed in view of the mass form factors of the nuclei. The form factors have been extracted in plane wave approximation of the $A(\\gamma ,\\pi^0)A$ reaction and corrected for final state interaction effects with the help of distorted wave impulse approximations. Nuclear mass rms-radii have been calculated from the slope of the form factors for $q^2\\to 0$. Furthermore, the Helm model (hard sphere form factor folded with Gaussian) was used to extract diffraction radii from the zeroes of the form factor and skin thicknesses from the position and height of its first maximum. The diffraction radii from the Helm model agree with the corresponding charge radii obtained from electron scattering experiments within their uncertainties of a few per cent. The rms-radii from the slope of the form factors are systematically lower by up to 5% for PWIA and up to 10% for DWIA. Also the skin thicknesses extracted from the Helm model are systematically smaller than their charge counter parts.

B. Krusche

2005-09-01T23:59:59.000Z

245

CERAMIC WASTE FORM DATA PACKAGE  

SciTech Connect

The purpose of this data package is to provide information about simulated crystalline waste forms that can be used to select an appropriate composition for a Cold Crucible Induction Melter (CCIM) proof of principle demonstration. Melt processing, viscosity, electrical conductivity, and thermal analysis information was collected to assess the ability of two potential candidate ceramic compositions to be processed in the Idaho National Laboratory (INL) CCIM and to guide processing parameters for the CCIM operation. Given uncertainties in the CCIM capabilities to reach certain temperatures throughout the system, one waste form designated 'Fe-MP' was designed towards enabling processing and another, designated 'CAF-5%TM-MP' was designed towards optimized microstructure. Melt processing studies confirmed both compositions could be poured from a crucible at 1600{degrees}C although the CAF-5%TM-MP composition froze before pouring was complete due to rapid crystallization (upon cooling). X-ray diffraction measurements confirmed the crystalline nature and phase assemblages of the compositions. The kinetics of melting and crystallization appeared to vary significantly between the compositions. Impedance spectroscopy results indicated the electrical conductivity is acceptable with respect to processing in the CCIM. The success of processing either ceramic composition will depend on the thermal profiles throughout the CCIM. In particular, the working temperature of the pour spout relative to the bulk melter which can approach 1700{degrees}C. The Fe-MP composition is recommended to demonstrate proof of principle for crystalline simulated waste forms considering the current configuration of INL's CCIM. If proposed modifications to the CCIM can maintain a nominal temperature of 1600{degrees}C throughout the melter, drain, and pour spout, then the CAF-5%TM-MP composition should be considered for a proof of principle demonstration.

Amoroso, J.; Marra, J.

2014-06-13T23:59:59.000Z

246

DOE Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

U.S. Department of Energy Categorical Exclusion Determination Form Program or Field Office: TRIBAL ENERGY PROGRAM NV Project Title NV-TEP-WASHOE WISK'E'EM PROJECT Location: Tribal WASHOE WISK'E'EM PROJECT American Recovery and Reinvestment Act: Proposed Action or Project Description The Washoe Tribe of Nevada and California (Washoe Tribe) proposes to install four small (approximately 1.0-1.5 kW) vertical wind turbines at designated locations on Tribal lands to offset energy costs for the

247

Ex Parte Communications | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Open Government » Ex Parte Communications Open Government » Ex Parte Communications Ex Parte Communications Ex Parte Communication Guidance Guidance on Ex Parte Communications in Rulemaking Proceedings (October 2009) Ex Parte Communications Received Assistance to Foreign Atomic Energy Activities Nuclear Energy Institute Letter Regarding Proposed Revision of 10 CFR 810 - (March 13, 2012) Exelon Statement Regarding Nuclear Safety and 10 CFR 810 - (May 9, 2012) Nuclear Energy Institute Regarding Proposed Revision of 10 CFR 810 - (June 11, 2012) Ex Parte Communication with the Department of Energy - (August 1, 2013) Memorandum of Ex Parte Communication with the Department of Energy - (August 21, 2013) Memo for the Initial GAO Meeting on Part 810 - (September 10, 2013) American Nuclear Society (ANS) - October 28, 2013

248

DEQ UPDES Forms Website | Open Energy Information  

Open Energy Info (EERE)

Forms Website Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: DEQ UPDES Forms Website Abstract A website containing forms and guidance for applying for...

249

CAPITAL PROGRAMMING GUIDE (PART 7)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CAPITAL PROGRAMMING GUIDE CAPITAL PROGRAMMING GUIDE V 2.0 SUPPLEMENT TO OFFICE OF MANAGEMENT AND BUDGET CIRCULAR A-11, PART 7: PLANNING, BUDGETING, AND ACQUISITION OF CAPITAL ASSETS JUNE 2006 CAPITAL PROGRAMMING GUIDE LIST OF ABBREVIATIONS LIST OF ABBREVIATIONS ACP Agency Capital Plan CI Commercial Items COTS Commercial-off-the-shelf ESPC Energy Savings Performance Contract EVM Earned Value Management FAR Federal Acquisition Regulation FARA Federal Acquisition Reform Act (Clinger-Cohen Act) of 1996 1 (Division D of Pub. L. No. 104-106) FASA Federal Acquisition Streamlining Act of 1994 (Pub. L. No. 103-355) FRPC Federal Real Property Council GAO Government Accountability Office GPRA Government Performance and Results Act of 1993 (Pub. L. No. 103-62)

250

FermiCulture Subscription Form  

NLE Websites -- All DOE Office Websites (Extended Search)

The FermiCulture email list is used to send email announcements and reminders about upcoming cultural events at Fermilab (e.g., the Fermilab Arts, Film, and Lecture series). This is a private, announcement-only mail list and will never be used for spamming or discussions. Subscribers receive approximately five emails per month. Use the form below to subscribe to (or unsubscribe from) the FermiCulture list. The FermiCulture email list is used to send email announcements and reminders about upcoming cultural events at Fermilab (e.g., the Fermilab Arts, Film, and Lecture series). This is a private, announcement-only mail list and will never be used for spamming or discussions. Subscribers receive approximately five emails per month. Use the form below to subscribe to (or unsubscribe from) the FermiCulture list. Email address: Name (First Last): Subscribe to email list Unsubscribe from email list Send Reset The Regular Mailing List If you would like to receive mailings through the regular mail of upcoming cultural events at Fermilab and are not on our mailing list, then please fill out the information below. Name: Address: City: State: Zip: Country: E-mail:

251

EERE Postdoctoral Fellowships Application Form | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fellowships Application Form EERE Postdoctoral Fellowships Application Form Application for the Department of Energy Office of Energy Efficiency and Renewable Energy (EERE)...

252

Fermilab at Work | Manuals and Forms  

NLE Websites -- All DOE Office Websites (Extended Search)

for or Renew Computing Privileges Apply for or renew Fermilab ID Benefits Forms Business Services Forms Directorate Policy Guide Engineering Manual Engineering Manual Engineering...

253

Forming the Future | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

More Documents & Publications Rapid Freeform Sheet Metal Forming CX-010510: Categorical Exclusion Determination Development of High-Volume Warm Forming of Low-Cost Magnesium Sheet...

254

Form 2A | Open Energy Information  

Open Energy Info (EERE)

Form 2ALegal Abstract Form 2A: Application for Permit to Discharge Municipal Wastewater from New and Existing Publicly Owned Treatment Works, current through August 14, 2014....

255

Form 2B | Open Energy Information  

Open Energy Info (EERE)

Application: Form 2BLegal Abstract Form 2B: Application for Permit to Discharge Wastewater from Concentrated Animal Feeding Operations and Aquatic Animal Production...

256

Form 2D | Open Energy Information  

Open Energy Info (EERE)

Form 2DLegal Abstract Form 2D: Application for Permit to Discharge Process Wastewater - New Industrial Facilities, current through August 14, 2014. Published NA Year...

257

Form 2C | Open Energy Information  

Open Energy Info (EERE)

Application: Form 2CLegal Abstract Form 2C: Application for Permit to Discharge Wastewater - Existing Industrial Facilities, current through August 14, 2014. Published NA...

258

INSTRUCTIONS for COMPLETING SCHEDULE CARD WEB FORMS  

E-Print Network (OSTI)

Mar 22, 2012 ... Instructions for completing schedule card web forms. The following students are required to complete schedule card web forms. all returning...

Kelly Beranger

2012-03-22T23:59:59.000Z

259

CDC DOGGR Forms | Open Energy Information  

Open Energy Info (EERE)

CDC DOGGR FormsLegal Abstract The California Department of Conservation (CDC) Division of Oil, Gas & Geothermal Resources (DOGGR) provides various forms and information related to...

260

Document Control Template-Form  

NLE Websites -- All DOE Office Websites (Extended Search)

4 Publication Review and Approval 11_0608.doc608 Page 1 of 3 4 Publication Review and Approval 11_0608.doc608 Page 1 of 3 EOTA - Business Form Document Title: Publication Review and Approval Document Number: ITTF-014 Rev. 11_0608 Document Owner: Ben Aragon Backup Owner: Janet Lee Approver(s): Melissa Otero Parent Document: ITTP-015 Website Development Maintenance Notify of Changes: EOTA Employees Referenced Document(s): N/A ITTF-014 Publication Review and Approval 11_0608.doc608 Page 2 of 3 Revision History: Rev. Description of Changes A Initial Release 08_0523 Added review section for QA. Added "Approved w/changes" section. Changed "Corrections" and "Reason" to "Recommendations". Adjusted spacing on document. 08_1105 Added review section for Project Manager. Adjusted spacing on document.

Note: This page contains sample records for the topic "form 715-01 part" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Alumina forming iron base superalloy  

SciTech Connect

An austenitic stainless steel alloy, consists essentially of, in weight percent 2.5 to 4 Al; 25 to 35 Ni; 12 to 19 Cr; at least 1, up to 4 total of at least one element selected from the group consisting of Nb and Ta; 0.5 to 3 Ti; less than 0.5 V; 0.1 to 1 of at least on element selected from the group consisting of Zr and Hf; 0.03 to 0.2 C; 0.005 to 0.1 B; and base Fe. The weight percent Fe is greater than the weight percent Ni. The alloy forms an external continuous scale including alumina, and contains coherent precipitates of .gamma.'-Ni.sub.3Al, and a stable essentially single phase FCC austenitic matrix microstructure. The austenitic matrix is essentially delta-ferrite-free and essentially BCC-phase-free.

Yamamoto, Yukinori; Muralidharan, Govindarajan; Brady, Michael P.

2014-08-26T23:59:59.000Z

262

Part II: Project Summaries Project Summaries  

E-Print Network (OSTI)

Part II: Project Summaries Part II Project Summaries #12 generally cannot be achieved for reasonable computational cost. Applications that require modeling, and in nondestructive testing. The objective of this project is to advance the state of the art in electromagnetic

Perkins, Richard A.

263

Rulemaking 10 CFR Part 1021 Changes  

Energy.gov (U.S. Department of Energy (DOE))

10 CFR Part 1021, previous version of DOEs NEPA Implementing Procedures. Previous categorical exclusions are listed in Appendices A and B to Subpart D. The current version of 10 CFR Part 1021...

264

Ex parte Communication | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

proposed rulemaking on energy conservation standards for residential refrigerators, refrigerator-freezers, and freezers. Ex parte Communication More Documents & Publications...

265

Cognitive Science Minor Approval Form Name __________________________________________ ID # _________________________  

E-Print Network (OSTI)

Cognitive Science Minor Approval Form Name __________________________________________ ID: ___________________________________________________ _______________ Cognitive Science Minor Committee Date

Gering, Jon C.

266

Superior Energy Performance Enrollment and Application Forms...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Superior Energy Performance Enrollment and Application Forms for Industry Version: 12-9-2013 Contents Overview ......

267

Building Public Trust: Part 2  

NLE Websites -- All DOE Office Websites (Extended Search)

2: Protecting Future Human Subjects 2: Protecting Future Human Subjects Overview The success of the effort to open the historical record will be measured, in part, by whether we avoid repeating the mistakes of the past. ACHRE's review of human radiation experiments raised questions of whether the current system of protection is adequate for all types of human subjects research. The measures described below will strengthen the protection of human subjects and address ACHRE's findings. The measures described below will strengthen the protection of human subjects and address ACHRE's findings. Federal responsibilities for maintaining ethics in human subjects research are dispersed in several agencies and committees in the government. First, each agency is responsible for the ethical admin-istration of its programs, including grants and contracts. Second, the President's Office of Science and Technology Policy has a statutory oversight role, and will continue to monitor and address issues of science and ethics. Third, the Department of Health and Human Services has a convening role among agencies that are bound by the Common Rule the Federal Policy for the Protection of Human Subjects which, along with Food and Drug Administration (FDA) regulations, governs all federally conducted, funded, or regulated research (56 Federal Register 28010, June 18, 1991). Finally, the National Bioethics Advisory Commission (NBAC) an independent body recently established by the President is taking up some of the most pressing ethical issues faced by this country.

268

EIA - 2008 New Electric Power Forms  

Gasoline and Diesel Fuel Update (EIA)

New Electricity Survey Forms New Electricity Survey Forms What's happening with electric power forms? In 2008 EIA is consolidating 6 data collection forms into 2 forms. Fill out forms electronically (Available soon!) Not registered? Why is that a good thing? * For Electricity Generators: This reduces the number of forms to submit. (Re-registering is not required!) * For EIA and Taxpayers: This streamlines the collection process for better efficiency. * For Everyone: This enables us to provide additional information about the electric power industry. figure showing what electricity forms merge into the new forms Click for more information on the New EIA-860 Click for more information on the New EIA-923 Resources to help you with the changes Printable Forms & Instructions 923 860

269

Part B - Requirements & Funding Information PART B - Requirements and Funding Information  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

b. Part B 1 b. Part B 1 Part B - Requirements & Funding Information PART B - Requirements and Funding Information Gray highlights are instructions. Remove the instructions from the interagency agreement. Attachment 3.b. Part B 2 PART B - Requirements & Funding Information B.1. Purpose This is an interagency transaction. An interagency transaction is an intra-governmental transaction when the servicing agency uses internal resources to support the requesting agency requirement and is a reimbursable activity that requires an interagency agreement. This Part of the interagency agreement (IA) (hereinafter 'Part B') serves as the funding document. It provides specific information on the requirements of the Department of Energy, hereinafter 'the Requesting

270

DOL: Role in EEOICPA - Part B and Part E | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Parts B and E. Part B covers current and former workers who have been diagnosed with cancer, chronic beryllium disease, beryllium sensitivity, or silicosis, and whose illness was...

271

Electrochemical Apparatus with Disposable and Modifiable Parts  

NLE Websites -- All DOE Office Websites (Extended Search)

Electrochemical Apparatus with Disposable and Modifiable Parts Electrochemical Apparatus with Disposable and Modifiable Parts Electrochemical Apparatus with Disposable and Modifiable Parts The invention also includes electrochemical apparatus that can interface with optical instrumentation. If the working electrode is transparent, light from an optical fiber may be directed through the working electrode and into a cuvette. July 3, 2013 Electrochemical Apparatus with Disposable and Modifiable Parts Available for thumbnail of Feynman Center (505) 665-9090 Email Electrochemical Apparatus with Disposable and Modifiable Parts Applications: Electrochemical experiments in solution Electrochemical experiments on surfaces Bulk electrolysis experiments Fuel cells Corrosion studies Academic Labs Teaching and research Benefits: Incorporates disposable, commercially available cuvettes

272

Ex Parte Memorandum | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Parte Memorandum Parte Memorandum Ex Parte Memorandum On Wednesday, May 5, 2010, representatives from various signatories to the consensus agreement met with representatives from the Department of Energy. Advocates for the consensus agreement urged the Department of Energy to adopt the entire agreement, except provisions relating to building codes which require congressional action. The parties also discussed the need to develop effective enforcement mechanisms in general, and in particular if the Department of Energy decides to adopt regional standards for the residential heating and cooling systems covered by the consensus agreement. Ex Parte Memorandum More Documents & Publications Ex Parte Memorandum Ex Parte Memorandum - Natural Resources Defense Council Docket No. EERE-2011-BT-NOA-0067 and RIN Number 1904-AC52 Ex parte

273

Method and tool for expanding tubular members by electro-hydraulic forming  

DOE Patents (OSTI)

An electro-hydraulic forming tool having one or more electrodes for forming parts with sharp corners. The electrodes may be moved and sequentially discharged several times to form various areas of the tube. Alternatively, a plurality of electrodes may be provided that are provided within an insulating tube that defines a charge area opening. The insulating tube is moved to locate the charge area opening adjacent one of the electrodes to form spaced locations on a preform. In other embodiments, a filament wire is provided in a cartridge or supported by an insulative support.

Golovashchenko, Sergey Fedorovich; Bonnen, John Joseph Francis

2013-10-29T23:59:59.000Z

274

Change Request Forms | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Change Request Forms | National Nuclear Security Administration Change Request Forms | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Change Request Forms Home > About Us > Our Programs > Nuclear Security > Nuclear Materials Management & Safeguards System > NMMSS Information, Reports & Forms > Change Request Forms Change Request Forms

275

Method for forming porous sintered bodies with controlled pore structure  

DOE Patents (OSTI)

The present invention is based, in part, on a method for combining a mixture of hydroxide and hydride functional siloxanes to form a polysiloxane polymer foam, that leaves no residue (zero char yield) upon thermal decomposition, with ceramic and/or metal powders and appropriate catalysts to produce porous foam structures having compositions, densities, porosities and structures not previously attainable. The siloxanes are mixed with the ceramic and/or metal powder, wherein the powder has a particle size of about 400 .mu.m or less, a catalyst is added causing the siloxanes to foam and crosslink, thereby forming a polysiloxane polymer foam having the metal or ceramic powder dispersed therein. The polymer foam is heated to thermally decompose the polymer foam and sinter the powder particles together. Because the system is completely nonaqueous, this method further provides for incorporating reactive metals such as magnesium and aluminum, which can be further processed, into the foam structure.

Whinnery, LeRoy Louis (4929 Julie St., Livermore, Alameda County, CA 94550); Nichols, Monte Carl (4070 Guilford Ave., Livermore, Alameda County, CA 94550)

2000-01-01T23:59:59.000Z

276

Metered Mail Form International Mail Only  

E-Print Network (OSTI)

Metered Mail Form International Mail Only Charge to Department USPS First Class Mail International International Metered Mail Form and must be kept separate from all other domestic mail. · International mail

Palmeri, Thomas

277

Experiential Component Approval Form Concentration in Nanotechnology  

E-Print Network (OSTI)

Experiential Component Approval Form Concentration in Nanotechnology Return completed form to ENG Plan to complete the experiential component as a requirement for the concentration in Nanotechnology to complete the experiential component for the Nanotechnology Concentration by: Research Experience in Lab

Goldberg, Bennett

278

Form:Testing Facility | Open Energy Information  

Open Energy Info (EERE)

registry, the form will be populated with that facility's fields and you may edit. Submit Retrieved from "http:en.openei.orgwindex.php?titleForm:TestingFacility&oldid67587...

279

Taylor forms { use and limits Arnold Neumaier  

E-Print Network (OSTI)

integration of asteroid dynamics in the solar system in 2001. Apart from summarizing what Taylor forms, centered form, cluster e#11;ect, computer-assisted proof, constraint propagation, dependence, interval

Neumaier, Arnold

280

ENG Form 4345 Application | Open Energy Information  

Open Energy Info (EERE)

ENG Form 4345 Application Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- Permit ApplicationPermit Application: ENG Form 4345 ApplicationLegal...

Note: This page contains sample records for the topic "form 715-01 part" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

CSLC ROW Forms | Open Energy Information  

Open Energy Info (EERE)

Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: CSLC ROW FormsLegal Abstract The California State Lands Commission (CSLC)...

282

Form 2E | Open Energy Information  

Open Energy Info (EERE)

OpenEI Reference LibraryAdd to library Legal Document- Permit ApplicationPermit Application: Form 2ELegal Abstract Form 2E: Application for Facilities that do not Discharge...

283

Musical form in non-narrative video  

E-Print Network (OSTI)

"Musical Form in Non- Narrative Video" explores musical structure as a model for visual form over time, specifically in the creation of artistic video. Video is a medium in which sound and image coexist at the source as ...

Sebring, Ellen Irene

1986-01-01T23:59:59.000Z

284

TCEQ Water Forms | Open Energy Information  

Open Energy Info (EERE)

TCEQ Water Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: TCEQ Water FormsLegal Abstract The Texas Commission on Environmental...

285

Transfer Request Form This form is to be completed by CUPE 1356 part-time employees interested in transferring to another unit  

E-Print Network (OSTI)

the corresponding box ) Cleaning Ontario G Licence Maintenance Ontario DZ Licence Landscape machinery Ontario: Glendon York Apts Undergraduate Housing Custodian / Maintenance Helper Housing Custodian

286

Data Form Number and Name Responsible Office(s) CIHE Data Form Gen  

E-Print Network (OSTI)

N E A S C D A T A F O R M S #12;Data Form Number and Name Responsible Office(s) CIHE Data Form Gen: General Information Form President's Office CIHE Data Form 1: Statement of Financial Position Executive Vice President CIHE Data Form 2-1: Statement of Unrestricted Revenues and Expenses Executive Vice

Snider, Barry B.

287

Part-Time Farming in Northeast Texas.  

E-Print Network (OSTI)

JANUARY THE AGRICULTURAL AND MECHANICAL COLLEGE OF TEXAS TEXAS AGRICULTURAL EXPERIMENT STATION R. D. LEWIS, DIRECTOR, COLLEGE STATION. TEXAS IN COOPERATION WITH THE U. S. DEPARTMENT OF AGRICULTURE 632320 - This analysis of part-the farming... is part of a broad the income levels, income sources and farm and human patterns of the.88,W rural o area of Northeast Texas (Tearas Agricultural Bulletin 940, Incomes of Rural Families in No A major farm adjustmen part-time farming, or a greater...

Martin, James R.; Southern, John H.

1961-01-01T23:59:59.000Z

288

Hand this form in at the Personnel  

E-Print Network (OSTI)

(including articles, posters and presentations offered for publication). See Metis. On what parts has? What agreements are made regarding education (professional education, conference attendance, training

Twente, Universiteit

289

Form W-9 (Rev. October 2007)  

NLE Websites -- All DOE Office Websites (Extended Search)

For individuals, this is your social security number (SSN). However, for a resident alien, sole proprietor, or disregarded entity, see the Part I instructions on page 3. For...

290

Automated Fuel Dispensing System Form Instructions  

E-Print Network (OSTI)

Automated Fuel Dispensing System Form Instructions If additional forms are necessary to provide(s) are hired and will be obtaining fuel, an Add Driver Form MUST be submitted for entry into the web database and/or diesel fuel to operate. Note: When a new vehicle, golf cart (gasoline), etc., is placed

Fernandez, Eduardo

291

CPR/AED Training Payment Form  

E-Print Network (OSTI)

CPR/AED Training Payment Form This form must be completed and submitted along with payment in order to participate in TxClass PN 900 CPR/AED Training. Cost to participate is $30. Payment may be in the form of IDT account or check payable to UT Austin. Upon receipt of payment and completion of training class

Yang, Zong-Liang

292

PENSION INVESTMENT CHANGE FORM Western University  

E-Print Network (OSTI)

PENSION INVESTMENT CHANGE FORM Western University PLEASE COMPLETE ALL SECTIONS OF THIS FORM This form is used to make all investment changes, except to reallocate holdings from the Liquidating Trust Fund. If you wish to make an investment change to reallocate your Liquidating Trust Fund holdings

Sinnamon, Gordon J.

293

SMITH NORMAL FORM AND LAPLACIANS DINO LORENZINI  

E-Print Network (OSTI)

SMITH NORMAL FORM AND LAPLACIANS DINO LORENZINI Abstract. Let M denote the Laplacian matrix of a graph G. Associated with G is a finite group (G), obtained from the Smith normal form of M, and whose /Im(M). This group can be computed in practice using the Smith normal form of M, as follows. Given any

Lorenzini, Dino J.

294

Singular Value Decomposition (SVD) and Polar Form  

E-Print Network (OSTI)

: E # F and g: F # E are linear maps, then g #f and f #g always have the same non­zero eigen­ valuesChapter 2 Singular Value Decomposition (SVD) and Polar Form 2.1 Polar Form In this chapter, we. SINGULAR VALUE DECOMPOSITION (SVD) AND POLAR FORM The fact that f # # f and f # f # are self

Gallier, Jean

295

Part B - Requirements & Funding Information  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

B - Requirements & Funding Information B - Requirements & Funding Information PART B - Requirements & Funding Information .......................................................................................... 2 PART B - Requirements & Funding Information B.1. Purpose This Part of the IA (hereinafter 'Part B') serves as the funding document. It provides specific information on the requirements of the Department of Energy, hereinafter 'the Requesting Agency' sufficient to demonstrate a bona fide need and identifies funds associated with the requirement to allow [insert the name of agency/organization that will provide acquisition services for the Department of Energy], hereinafter 'the Servicing Agency,' to provide acquisition assistance and conduct an interagency acquisition.

296

Ex parte memorandum | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

parte memorandum More Documents & Publications TEE-0047 - In the Matter of Samsung Electronics America TEE-0025 - In the Matter of LG Electronics, Inc. TEE-0022 - In the Matter...

297

Ex Parte Memorandum | Department of Energy  

Energy Savers (EERE)

Ex Parte Memorandum On Thursday, January 6, 2011, representatives from the Renewable Energy Markets Association (REMA) held a conference call with personnel from the U.S....

298

Memorandum Memorializing Ex Parte Communication - August 12,...  

Energy Savers (EERE)

Memorandum Memorializing Ex Parte Communication - August 12, 2011 On August 9, 2011, the Air-Conditioning, Heating and Refrigeration Institute's (AHRI) Unitary Small Engineering...

299

Ex Parte Communications | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

(May 1, 2013) Earthjustice Ex Parte MeetingTeleconference Summary - (June 20, 2014) Oil Shale Programmatic Environmental Impact Statement Center for Regulatory Effectiveness -...

300

Ex parte communication | Department of Energy  

Energy Savers (EERE)

Flow HVAC systems Ex parte communication More Documents & Publications Mitsubishi Electric: Consent Decree (2011-CE-010202) ISSUANCE 2014-12-23: Energy Conservation Program...

Note: This page contains sample records for the topic "form 715-01 part" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

University of Connecticut, Office of the Registrar, Transcript Request Form Transcript Request Form -University of Connecticut  

E-Print Network (OSTI)

University of Connecticut, Office of the Registrar, Transcript Request Form Transcript Request Form - University of Connecticut Office of the Registrar, Unit 4077T, Storrs, CT 06269-4077T Forms of Connecticut under other names, please indicate them here

Lozano-Robledo, Alvaro

302

Closed form Solutions to Some Nonlinear equations by a Generalized Cole-Hopf Transformation  

E-Print Network (OSTI)

In the first part of this paper we linearize and solve the Van der Pol and Lienard equations with some additional nonlinear terms by the application of a generalized form of Cole-Hopf transformation. We then show that the same transformation can be used to linearize Painleve III equation for certain combinations of its parameters. Finally we linearize new forms of Burger's and related convective equations with higher order nonlinearities.

Mayer Humi

2014-07-20T23:59:59.000Z

303

Integration-by-parts identities from the viewpoint of differential geometry  

E-Print Network (OSTI)

We present a new method to construct integration-by-part (IBP) identities from the viewpoint of differential geometry. Vectors for generating IBP identities are reformulated as differential forms, via Poincar\\'{e} duality. Using the tools of differential geometry and commutative algebra, we can efficiently find differential forms which generate on-shell IBP relation without doubled propagator. Various $D=4$ two-loop examples are presented.

Yang Zhang

2014-08-18T23:59:59.000Z

304

ORPS Facility Registration Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Facility Registration Form Facility Registration Form ORPS Facility Registration Form August 9, 2007 Add, Change or Delete a Facility for Occurrence Reporting and Processing System Submit completed form to: U.S. Department of Energy HSS InfoCenter, HS-1.22, 270CC 1000 Independence Ave., SW Washington, DC 20585-0270 FAX: 301-903-9823 PHONE: 800-473-4375 Note: Only one facility per form Type or print all entries TYPE OF CHANGE: Add a Facility (Complete Section 1.A, then go to Section 2) Change a Facility (Complete Section 1.B, then go to Section) Delete a Facility (Complete Section 1.C, then go to Section 2) ORPS Facility Registration Form More Documents & Publications ORPS User Registration Form DOE-TSPP-9, Maintenance of DOE Technical Standards - August 1, 2000 EA-1442: Final Environmental Assessment

305

GE Turbine Parts www.edisonmachine.com  

E-Print Network (OSTI)

vehicle: Has the code for a hydrogen car been cracked? World-first working eukaryotic cell mad from get swanky with the Equus Bass770 Zenos reveals details of the E10 roadster The Toyota FCV fuel cellGE Turbine Parts www.edisonmachine.com New authentic GE and Westinghouse Turbine Parts Muscle cars

Chiao, Jung-Chih

306

Part II: Project Summaries Project Summaries  

E-Print Network (OSTI)

Part II: Project Summaries Part II Project Summaries #12;22 Math & Computational Sciences Division generally cannot be achieved for reasonable computational cost. Applications that require modeling of this project is to advance the state of the art in electromagnetic computations by eliminating three existing

Perkins, Richard A.

307

part-timemba evening & Weekend Formats  

E-Print Network (OSTI)

part-timemba the ross part-time mba evening & Weekend Formats #12;2 welcome #12;1 welcome welcome emphasize leadership. most make a point of connecting theory to practice. So, you may ask, why ross? the ross difference is action-based learning, an approach that is significantly different from other mba

Michigan, University of

308

UL Ex Parte communications | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

UL Ex Parte communications UL Ex Parte communications UL Ex Parte communications On December 27, I was contacted by Ms. Ashley Armstrong, U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Building Technologies Program and asked if I would be willing to meet with her and certain US DOE staff to discuss UL's "different testing and certification offerings as they relate to electric motors". Ex parte comm_1_7_2013.pdf More Documents & Publications EERE-2010-BT-STD-0027 Ex Parte Letter NEMA Motor Training re DOE Motors Rule 15 July 2013. Docket No. EERE-2010-BT-STD-0027 Energy Conservation Standards for Commercial and Industrial Electric Motors: Public Meeting and Availability of the Preliminary Technical Support Document 77 Fed. Reg. 43015 (July 23,

309

Property:PartOf | Open Energy Information  

Open Energy Info (EERE)

PartOf PartOf Jump to: navigation, search Property Name PartOf Property Type Page Description Similar to Property:TypeOf, this property identifies pages that represent a larger concept that encompasses the subject page. This is most commonly used in geospatial relationships, to say that a city is PartOf a state. This is a property of type Page. Subproperties This property has the following 2 subproperties: G GRR/Section 4-FD-a - Exploration Permit BLM N User:Nlangle/test3 Pages using the property "PartOf" Showing 25 pages using this property. (previous 25) (next 25) 2 2-M Probe Survey + Glossary + A Aaronsburg, Pennsylvania + Centre County, Pennsylvania +, Pennsylvania + Abbeville County, South Carolina + South Carolina + Abbeville, Alabama + Henry County, Alabama +, Alabama +, Alabama's 2nd congressional district +

310

Memorandum Memorializing Ex Parte Communication, DOE impending  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Memorandum Memorializing Ex Parte Communication, DOE impending Memorandum Memorializing Ex Parte Communication, DOE impending determination of coverage for commercial and industrial fans, blowers, and fume hoods. Memorandum Memorializing Ex Parte Communication, DOE impending determination of coverage for commercial and industrial fans, blowers, and fume hoods. The meeting was requested by AMCA International to introduce the association's leadership, standards, and experience in developing fan standards to DOE; to learn more about the DOE process for developing regulations for fan efficiency standards; and to inform DOE on how commercial and industrial fan markets work. AMCA_Ex_Parte.pdf More Documents & Publications DOE-STD-1168-2013 DOE Meeting Memorandum: Ex Parte Communications Independent Oversight Review, Savannah River Site - August 2011

311

UL Ex Parte communications | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

UL Ex Parte communications UL Ex Parte communications UL Ex Parte communications On December 27, I was contacted by Ms. Ashley Armstrong, U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Building Technologies Program and asked if I would be willing to meet with her and certain US DOE staff to discuss UL's "different testing and certification offerings as they relate to electric motors". Ex parte comm_1_7_2013.pdf More Documents & Publications EERE-2010-BT-STD-0027 Ex Parte Letter NEMA Motor Training re DOE Motors Rule 15 July 2013. Docket No. EERE-2010-BT-STD-0027 Energy Conservation Standards for Commercial and Industrial Electric Motors: Public Meeting and Availability of the Preliminary Technical Support Document 77 Fed. Reg. 43015 (July 23,

312

Gravity Waves in a Horizontal Shear Flow. Part I: Growth Mechanisms in the Absence of Potential Vorticity Perturbations  

E-Print Network (OSTI)

Gravity Waves in a Horizontal Shear Flow. Part I: Growth Mechanisms in the Absence of Potential (Manuscript received 7 May 2007, in final form 17 July 2008) ABSTRACT Interaction of internal gravity waves of closed-form solutions. Localized wave packet trajectories are obtained, the energy growth mechanisms

Farrell, Brian F.

313

Slag Behavior in Gasifiers. Part II: Constitutive Modeling of Slag  

SciTech Connect

The viscosity of slag and the thermal conductivity of ash deposits are among two of the most important constitutive parameters that need to be studied. The accurate formulation or representations of the (transport) properties of coal present a special challenge of modeling efforts in computational fluid dynamics applications. Studies have indicated that slag viscosity must be within a certain range of temperatures for tapping and the membrane wall to be accessible, for example, between 1,300 C and 1,500 C, the viscosity is approximately 25 Pas. As the operating temperature decreases, the slag cools and solid crystals begin to form. Since slag behaves as a non-linear fluid, we discuss the constitutive modeling of slag and the important parameters that must be studied. We propose a new constitutive model, where the stress tensor not only has a yield stress part, but it also has a viscous part with a shear rate dependency of the viscosity, along with temperature and concentration dependency, while allowing for the possibility of the normal stress effects. In Part I, we reviewed, identify and discuss the key coal ash properties and the operating conditions impacting slag behavior.

Massoudi, Mehrdad [National Energy Technology Laboratory; Wang, Ping

2013-02-07T23:59:59.000Z

314

NEUP Student Travel Request Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Student Travel Request Form NEUP Student Travel Request Form NEUP Fellowship Travel Request Form Student Travel Request Form.pdf More Documents & Publications Investing in the next...

315

Mathematical Sciences Undergraduate Handbook 201011 Part 5: Study Programmes Part 5 Page 1  

E-Print Network (OSTI)

Mathematical Sciences Undergraduate Handbook 2010­11 Part 5: Study Programmes Part 5 ­ Page 1 Study ...............................................................................12 FG31 BSc in Mathematics and Physics ................................................................................17 Disclaimer This handbook attempts to provide advice but please see the Queen Mary Academic

Wright, Francis

316

Mathematical Sciences Undergraduate Handbook 200910 Part 5: Study Programmes Part 5 Page 1  

E-Print Network (OSTI)

Mathematical Sciences Undergraduate Handbook 2009­10 Part 5: Study Programmes Part 5 ­ Page 1 Study? ................................................................................3 What does "choose another n credits" mean ...............................................................................14 FG31 BSc in Mathematics and Physics

Wright, Francis

317

Paperclips Supply Store Forms | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Paperclips Supply Store Forms Paperclips Supply Store Forms Paperclips Supply Store Forms Catalog Order Form for Non-Stocked or Specialty Items For any non-stocked or special item that needs to be ordered, the Catalog Order Form (pdf) needs to be filled in. All supplies ordered MUST be used for Official Government Business. All catalog orders are subject to full payment or a restocking fee if items ordered are returned to the supplier due to the customer not picking up the item(s) within five days of receipt by the store personnel or the customer deciding to return the item(s). This form is fillable and also saveable with the Acrobat Reader or through your web browser. Request Supply Store Purchasing Authority for a Non-Federal Employee In order for non-federal headquarters personnel to gain access to make

318

ProForm | Open Energy Information  

Open Energy Info (EERE)

ProForm ProForm Jump to: navigation, search Tool Summary Name: ProForm Agency/Company /Organization: Lawrence Berkeley National Laboratory Sector: Climate, Energy Focus Area: - Landfill Gas, Energy Efficiency, Solar, Wind Topics: Co-benefits assessment, - Environmental and Biodiversity, Finance Resource Type: Software/modeling tools User Interface: Spreadsheet Complexity/Ease of Use: Moderate Website: poet.lbl.gov/Proform/ Cost: Paid References: ProForm[1] Related Tools ICCT Roadmap Model General Equilibrium Modeling Package (GEMPACK) Modeling International Relationships in Applied General Equilibrium (MIRAGE) ... further results Find Another Tool FIND DEVELOPMENT IMPACTS ASSESSMENT TOOLS Logo: ProForm ProForm is a software tool designed to support a basic assessment of the

319

Free-form Smeared Bottomonium Correlation Functions  

E-Print Network (OSTI)

Gauge-invariant sources with a hydrogen wave function shape are constructed for bottomonium two-point correlation functions using the free-form smearing technique. The bottomonium spectrum, including a first lattice result for the D-wave first-excited state, is extracted from free-form smeared correlation functions. Results are compared with conventional smearing techniques and free-form smearing is found to have the advantage of reduced statistical errors.

Mark Wurtz; Randy Lewis; R. M. Woloshyn

2014-09-24T23:59:59.000Z

320

Revision 08 (08/10) Form G Radioactive Waste Disposal Form  

E-Print Network (OSTI)

Revision 08 (08/10) Form G Radioactive Waste Disposal Form RS - 19g Proc. 9290, 9501 General Instructions: 1. Do not mix different waste forms together. Keep dry, liquid, and scintillation vials separate. 2. Do not mix waste of different isotopes. 3. Entries are to be made on this form each time waste

Nair, Sankar

Note: This page contains sample records for the topic "form 715-01 part" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Summary: Section 4.1, Part 1 Summary: Section 4.1, Part 1  

E-Print Network (OSTI)

all ten vector space axioms hold, we can conclude that S is a vector space. Summary: Section 4.1, PartSummary: Section 4.1, Part 1 Summary: Section 4.1, Part 1 #12;A vector space is a nonempty set V of objects, called vectors, on which are defined addition and scalar multiplication, subject to the ten

Myers, Amy

322

Frequently Asked Questions Form EIA-857  

U.S. Energy Information Administration (EIA) Indexed Site

Natural Gas Survey Forms FAQ Natural Gas Survey Forms FAQ EIA-857, "Monthly Report of Natural Gas Purchases and Deliveries to Consumers" You may always call Amy Sweeney for assistance at (202) 586-2627 or e-mail us at OOG.SURVEYS@eia.gov. Q1. How do I get a copy of the form and/or the instructions? Q2. What version of the form should I use? Q3. How do I submit the form? Q4. When is the form due? Q5. My company does not have the information required on the Form EIA-857 within 30 days after the end of the report month. Can we get an extension? Q6. Who should I inform of a change in the contact person in our company for Form EIA-857? Q7. Who should I inform if our company is sold, merged with another company, or buys another natural gas company? Q8. Why does my company always get selected to file Form EIA-857?

323

Quick Plastic Forming of Aluminum Sheet Metal  

NLE Websites -- All DOE Office Websites (Extended Search)

General Motors' President North America, Gary Cowger, General Motors' President North America, Gary Cowger, reviews the 2004 Chevy Malibu Maxx after introducing it to the media at the New York Auto Show. (photo courtesy of General Motors) Quick Plastic Forming of Aluminum Sheet Metal Background Aluminum automotive components made using a hot blow forming process are reducing vehicle weight and increasing the fuel efficiency of today's cars. However, before General Motors (GM) and the U.S. Department of Energy (DOE) sponsored research in this technol- ogy, blow forming of aluminum was not a viable process for automakers. The prior blow forming process,

324

Department of Energy Record of Invention Form  

Energy.gov (U.S. Department of Energy (DOE))

DOE Form GC-213 (2-78) DOE PR-9-9 U.S. Department of Energy Office of Assistant General Counsel for Patents Record of Invention

325

Nucleon Form Factor Measurements and Interpretation  

SciTech Connect

The data base for the form factors of the nucleon obtained from elastic ep scattering is discussed, as well as some recent developments in their calculation.

Charles F. Perdrisat

2007-08-22T23:59:59.000Z

326

ODEQ - Construction Stormwater Application and Forms Manual ...  

Open Energy Info (EERE)

search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: ODEQ - Construction Stormwater Application and Forms ManualPermittingRegulatory...

327

United States Atomic Energy Commission formed  

NLE Websites -- All DOE Office Websites (Extended Search)

formed As the United Nations Atomic Energy Commission failed to come to grips with the growing nuclear weapons problem, the United States worked to establish its own formal...

328

Contact Form - DOE Directives, Delegations, and Requirements  

NLE Websites -- All DOE Office Websites (Extended Search)

Contact Form by Diane Johnson Directives are the Department of Energy's Primary means of establishing policies, requirements, responsibilities, and procedures for Departmental...

329

Warm Forming of Aluminum?AMD 307  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

controlled conditions * Transition to future projects (e.g. warm forming of magnesium) * Lead to the development of design rules for WF tooling * Be flexible allowing...

330

WYSS TECHNOLOGY DEVELOPMENT FELLOWSHIP NOMINATION FORM  

E-Print Network (OSTI)

WYSS TECHNOLOGY DEVELOPMENT FELLOWSHIP NOMINATION FORM 1. Biographical Sketch _____________________________________________ ________________________________________ Wyss Enabling Technology Platform Focus research plans relative to Wyss Enabling Technology Platform. 3. Enclose supporting letter from nominator

331

California Water Forms | Open Energy Information  

Open Energy Info (EERE)

Permit ApplicationPermit Application: California Water FormsLegal Published NA Year Signed or Took Effect 2009 Legal Citation Not provided DOI Not Provided Check for DOI...

332

Composition of a thermal plasma formed from PTFE with copper in non-oxidant atmosphere.  

E-Print Network (OSTI)

1 Composition of a thermal plasma formed from PTFE with copper in non-oxidant atmosphere. Part I the minimization of given thermodynamic functions or mass action laws even with plasmas out of thermal equilibrium- . Key Words: circuit breakers, SF6, PTFE, carbon formation, copper, dielectric gas, plasma composition

Paris-Sud XI, Université de

333

Photo Walk September 22, 2012 AUTHORIZATION AND RELEASE FORM FOR PHOTO CONTEST  

E-Print Network (OSTI)

Photo Walk September 22, 2012 AUTHORIZATION AND RELEASE FORM FOR PHOTO CONTEST I (name printed, all Photo(s), Artwork and /or other work in any media which I submit as part of my participation in the photo contest related to the Fermilab Photo Walk to be held at Fermilab on September 22, 2012. The use

Quigg, Chris

334

Cold drawn steel wires--processing, residual stresses and ductility Part II: Synchrotron and neutron diffraction  

E-Print Network (OSTI)

Cold drawn steel wires--processing, residual stresses and ductility Part II: Synchrotron Received in final form 29 September 2005 ABSTRACT Cold drawing of steel wires leads to an increase proposed that cold drawing would induce a phase transformation of the steel, possibly a martensitic

335

Clay and non-clay minerals in the pharmaceutical industry Part I. Excipients and medical applications  

E-Print Network (OSTI)

Clay and non-clay minerals in the pharmaceutical industry Part I. Excipients and medical in the pharmaceutical industry as lubricants, desiccants, disintegrants, diluents, binders, pigments and opaci ers form 17 July 2009 Accepted 22 July 2009 Available online 29 July 2009 Keywords: Minerals Pharmaceutical

Ahmad, Sajjad

336

White(etching!matter!in!bearing!steel! Part1:!Controlled(cracking!of!52100!steel!  

E-Print Network (OSTI)

! 1! White(etching!matter!in!bearing!steel! Part1:!Controlled(cracking!of!52100!steel! ! W!phenomena!such!as!the!appearance!of!"white(etching!areas"!or!"white(etching! cracks",!crack!particular!kind!of!microstructural!damage!in!the!form!of!regions!of!the! structure,! which! appear! white! in

Cambridge, University of

337

Hadley Circulation Response to Orbital Precession. Part I: Aquaplanets TIMOTHY M. MERLIS  

E-Print Network (OSTI)

Hadley Circulation Response to Orbital Precession. Part I: Aquaplanets TIMOTHY M. MERLIS Princeton, in final form 24 July 2012) ABSTRACT The response of the monsoonal and annual-mean Hadley circulation slab-ocean lower boundary. Contrary to expectations, the simulated monsoonal Hadley circulation

Eisenman, Ian

338

Loop Current Mixed Layer Energy Response to Hurricane Lili (2002). Part I: Observations  

E-Print Network (OSTI)

Loop Current Mixed Layer Energy Response to Hurricane Lili (2002). Part I: Observations ERIC W-dimensional oceanic energy evolution in response to Hurricane Lili's (2002) passage. Mixed layer temperature analyses, Florida (Manuscript received 4 May 2011, in final form 3 October 2011) ABSTRACT The ocean mixed layer

Miami, University of

339

Pion transverse charge density from timelike form factor data  

SciTech Connect

The transverse charge density in the pion can be represented as a dispersion integral of the imaginary part of the pion form factor in the timelike region. This formulation incorporates information from e+e- annihilation experiments and allows one to reconstruct the transverse density much more accurately than from the spacelike pion form factor data alone. We calculate the transverse density using an empirical parametrization of the timelike pion form factor and estimate that it is determined to an accuracy of ~10% at a distance b ~ 0.1 fm, and significantly better at larger distances. The density is found to be close to that obtained from a zero-width rho meson pole over a wide range and shows a pronounced rise at small distances. The resulting two-dimensional image of the fast-moving pion can be interpreted in terms of its partonic structure in QCD. We argue that the singular behavior of the charge density at the center requires a substantial presence of pointlike configurations in the pion's partonic wave function, which can be probed in other high-momentum transfer processes.

Gerald Miller, Mark Strikman, Christian Weiss

2011-01-01T23:59:59.000Z

340

Advanced Algorithms Course. Lecture Notes. Part 4  

E-Print Network (OSTI)

algorithms for Weighted Vertex Cover, but this was only an example to demonstrate the technique of LP for Vertex Cover. In general (for any set miniAdvanced Algorithms Course. Lecture Notes. Part 4 Using Linear Programming for Approximation

Damaschke, Peter

Note: This page contains sample records for the topic "form 715-01 part" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Part IV: Section G: Contract Administration  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

G - Page ii PART I SECTION G CONTRACT ADMINISTRATION DATA TABLE OF CONTENTS G.1 Contracting Officer's Representative(s) 1 G.2 Contract Administration 1 G.3 Modification...

342

Y-12s favorite stories, part 4  

NLE Websites -- All DOE Office Websites (Extended Search)

George Strasser and Hank Stoner's operation was in trouble. "They can't make any good thorium parts." They wanted Ken to go down to Building 9766, take over the operation, and fix...

343

Coordinated part delivery using distributed planning  

E-Print Network (OSTI)

In this thesis, we develop a distributed mobile robot platform to deliver parts around a model construction site. The platform's robots, specialized into delivery robots and assembly robots, use a distributed coverage ...

Bolger, Adrienne (Adrienne M.)

2010-01-01T23:59:59.000Z

344

Sustainability Plan Part I: Strategy and Goals  

E-Print Network (OSTI)

Sustainability Plan Part I: Strategy and Goals Prepared By: Oregon State University Sustainability University (OSU) Sustainable Facilities Committee (SFC) was established in November, 2004 by the OSU infrastructure and operations toward sustainability. Additionally, the group serves as a discussion forum

Escher, Christine

345

Jordan Canonical Form Recall the following definition  

E-Print Network (OSTI)

Jordan Canonical Form Recall the following definition: Definition 1. We say that two square is an example of a matrix in Jordan Canonical Form. Here we note that , , and but #12;. Hence, three of the four the notion of a Jordan matrix via two sets of examples. Example 1. The following are Jordan matrices: #12

Lee, Carl

346

Employee Referral Program Applicant Referral Form  

E-Print Network (OSTI)

Employee Referral Program Applicant Referral Form A Tennessee Board of Regents Institution An Equal candidates to fill position vacancies, The University of Memphis will pay a referral fee to employees who.00 to be awarded. · The University employee making the referral must complete the applicant referral form within 72

Dasgupta, Dipankar

347

Above Ground Storage Tank (AST) Inspection Form  

E-Print Network (OSTI)

Above Ground Storage Tank (AST) Inspection Form Petroleum Bulk Storage Form Facility Name: ______________________ Tank No:_______________ Date:_____________ Inspection Parameter Result Comments/Corrective Actions 1. Is there leaking in the interstitial space (not DRY)? YES/NO/NA 2. Tank surface shows signs of leakage? YES/NO/NA 3

Pawlowski, Wojtek

348

Bioenergy Business Partner Information Gathering Form  

E-Print Network (OSTI)

Bioenergy Business Partner Information Gathering Form Fax completed form to the Agribusiness.hnei.hawaii.edu/bmpp/stakeholders.asp Partners are organizations that perform, intend to perform, or should perform bioenergy processes and/or requirements. Please tell us about your organization and the role it plays in bioenergy production in Hawaii

349

UNIT SPECIFIC PLAN FORM INVESTIGATOR INFORMATION  

E-Print Network (OSTI)

performed in your work area. This information is requested to help EHS review your Unit Specific Plan Form or stored in your work areas, a" Standard Operating Procedure" (SOP), Appendix A of the Unit Specific Plan1 UNIT SPECIFIC PLAN FORM INVESTIGATOR INFORMATION Principal Investigator: E-Mail: Department

Maroncelli, Mark

350

THE UNLV FOUNDATION MONETARY TRANSFER FORM  

E-Print Network (OSTI)

THE UNLV FOUNDATION MONETARY TRANSFER FORM (Use one form for each account) Date Department Amount Transfer from Foundation Account Name UNLV Foundation Foundation Account Number Transfer to University contributions to this fund were accepted. Multiple Transfer A monetary transfer from the UNLV Foundation

Hemmers, Oliver

351

THE UNLV FOUNDATION MONETARY TRANSFER FORM  

E-Print Network (OSTI)

THE UNLV FOUNDATION MONETARY TRANSFER FORM (Use one form for each account) Date Department Amount Transfer from Foundation Account Name UNLV Foundation Foundation Account Number Transfer to University contributions to this fund were accepted. If Foundation account number does not equal BOR account number

Walker, Lawrence R.

352

Metered Mail Form Domestic Mail Only  

E-Print Network (OSTI)

Metered Mail Form Domestic Mail Only For USPS Mail Only Charge to Department First Class Mail Media Meter Form. · All outgoing USPS Mail that needs postage should be kept separate from all other mail already be sealed prior to being metered. Failure to properly seal this type of mail could result

Palmeri, Thomas

353

Dense colloidal fluids form denser amorphous sediments  

E-Print Network (OSTI)

Dense colloidal fluids form denser amorphous sediments Shir R. Libera,b , Shai Borohovicha of their randomly packed solid sediments. We demonstrate that the most dilute fluids of colloidal hard spheres form loosely packed sediments, where the volume fraction of the particles approaches in frictional systems

Schofield, Andrew B.

354

MINNESOTA STATE GRANT QUESTIONNAIRE RETURN FORM  

E-Print Network (OSTI)

MINNESOTA STATE GRANT QUESTIONNAIRE RETURN FORM: BY MAIL TO: Office of Student Finance 20 Fraser are not eligible for the Minnesota State Grant. Will you be receiving Wisconsin, South Dakota, North Dakota, sign, and return this form to One Stop. You are not eligible for the Minnesota State Grant. If you

Amin, S. Massoud

355

CONTRACT ROUTING FORM LOUISIANA TECH UNIVERSITY  

E-Print Network (OSTI)

CONTRACT ROUTING FORM LOUISIANA TECH UNIVERSITY This form is designed for use in routing contracts Services Contracts or contracts administered through the Office of University Research. Name of Person initiating the Routing Process Name of Department Other Party (on contract) Purpose of contract or work

Selmic, Sandra

356

ACOUSTIC FORMING FOR ENHANCED DEWATERING AND FORMATION  

SciTech Connect

The next generation of forming elements based on acoustic excitation to increase drainage and enhances formation both with on-line control and profiling capabilities has been investigated in this project. The system can be designed and optimized based on the fundamental experimental and computational analysis and investigation of acoustic waves in a fiber suspension flow and interaction with the forming wire.

Cyrus K Aidun

2007-11-30T23:59:59.000Z

357

Methods for forming long subsurface heaters  

DOE Patents (OSTI)

A method for forming a longitudinal subsurface heater includes longitudinally welding an electrically conductive sheath of an insulated conductor heater along at least one longitudinal strip of metal. The longitudinal strip is formed into a tubular around the insulated conductor heater with the insulated conductor heater welded along the inside surface of the tubular.

Kim, Dong Sub

2013-09-17T23:59:59.000Z

358

Form Identification No. (For Departmental Use)  

E-Print Network (OSTI)

you will need to refer to the COSHH assessment form for each hazardous substance being used a certain volume of your test sample into the polypot. 2) Form a complex compound that absorbs the light the transmitance of the solution with the photometer. c. Location of procedure/experiment/process. Field, Lab d

Sheldon, Nathan D.

359

star-forming regions, suggesting that the out-er parts of the solar nebula inherited, to a  

E-Print Network (OSTI)

reflect their formation at higher temperatures than for Hale-Bopp, that is, closer to the Sun (14 in the millimetric and submillimetric domains were analyzed with the excitation model of (7, 11), adopting a gas, is the gas-to-dust mass ratio, mH2O is the H2O molecular mass, and ZH2O is the H2O sublimation rate per unit

Meech, Karen Jean

360

Copyright! 2010!No!part!of!this!presentation!may!be! reproduced!in!any!form!without!prior!authorization.  

E-Print Network (OSTI)

!ENERGY!&!GREEN!DESIGN!" Smart!Grid!Cities Material!from!the!Electric!Power ­ Electrify!Transportation:!Plug"In!Hybrid!Electric! Vehicles ­ Develop!and!Use!Alternative!Transportation!Fuels · Green the electric power supply ­ Expand!the!Use!of!Renewable!Electric!Generation ­ Expand!Nuclear!Power

Amin, S. Massoud

Note: This page contains sample records for the topic "form 715-01 part" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Copyright! 2010!No!part!of!this!presentation!may!be! reproduced!in!any!form!without!prior!authorization.  

E-Print Network (OSTI)

!and!Recommendations · Build!a!stronger!and!smarter!electrical!energy! infrastructure ­ Transform!the!Network!into!a!Smart!Grid!a!modernized!transmission!system!to!provide! energy!to!centers!of!demand · Build!a!stronger!and!smarter!electrical!energy! infrastructure ­ Transform!the!Network!into!a!Smart!Grid:!Toward!stronger,! smarter,!and!more!secure!energy! infrastructure Material!from!the!Electric

Amin, S. Massoud

362

UTILITIES POLICY 1 The University of Aberdeen's Utilities Policy forms part of the institutional commitment to constant  

E-Print Network (OSTI)

where possible and this is detailed in the Sustainable Buildings Policy. 4 The University will monitor to sustainability and social responsibility. The objectives and context for sustainable energy and water use trading scheme. 3 For building works the University will implement the energy efficiency requirements

Levi, Ran

363

Form W-8BEN (Rev. February 2006)  

NLE Websites -- All DOE Office Websites (Extended Search)

Form Form W-8BEN (Rev. February 2006) Department of the Treasury Internal Revenue Service Certificate of Foreign Status of Beneficial Owner for United States Tax Withholding ᮣ See separate instructions. ᮣ Give this form to the withholding agent or payer. Do not send to the IRS. OMB No. 1545-1621 Do not use this form for: Instead, use Form: ● A foreign partnership, a foreign simple trust, or a foreign grantor trust (see instructions for exceptions) W-8ECI or W-8IMY ● A foreign government, international organization, foreign central bank of issue, foreign tax-exempt organization, foreign private foundation, or government of a U.S. possession that received effectively connected income or that is claiming the applicability of section(s) 115(2), 501(c), 892, 895, or 1443(b) (see instructions)

364

On Line Beamline Commissioning Activity Approval Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Commissioning Activity Approval Form Commissioning Activity Approval Form This form is to be filled by the Commissioning Activity Team Leader. No beamline commissioning activities will be allowed to run without a properly completed, approved, and posting of this commissioning approval form. You will be notified by e-mail upon approval. Sector Beamline Expected Start Date Expected Duration 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 BM ID ( Give a Unit) Activity Description( Give only a brief description) Commissioning Team Members First and Last Name Affiliation Phone Number 1. 2. 3. 4. 5. 6. Special Safety Concerns Commissioning Activity Team Leader Name E-Mail Address Submit Commissioning Activity Approval Form Clear all Fields and start All over again!!!

365

Qualifying radioactive waste forms for geologic disposal  

SciTech Connect

We have developed a phased strategy that defines specific program-management activities and critical documentation for producing radioactive waste forms, from pyrochemical processing of spent nuclear fuel, that will be acceptable for geologic disposal by the US Department of Energy. The documentation of these waste forms begins with the decision to develop the pyroprocessing technology for spent fuel conditioning and ends with production of the last waste form for disposal. The need for this strategy is underscored by the fact that existing written guidance for establishing the acceptability for disposal of radioactive waste is largely limited to borosilicate glass forms generated from the treatment of aqueous reprocessing wastes. The existing guidance documents do not provide specific requirements and criteria for nonstandard waste forms such as those generated from pyrochemical processing operations.

Jardine, L.J. [Lawrence Livermore National Lab., CA (United States); Laidler, J.J.; McPheeters, C.C. [Argonne National Lab., IL (United States)

1994-09-01T23:59:59.000Z

366

Miscellaneous Forms | Y-12 National Security Complex  

NLE Websites -- All DOE Office Websites (Extended Search)

Miscellaneous Forms Miscellaneous Forms Miscellaneous Forms The following miscellaneous forms are provided in PDF fillable and/or Word format. Click the link in the "Format" column to open a copy of the form or right-click to download. Number* Title/Description Format** SF-85 Questionnaire for Non-Sensitive Positions PDF-fil UCN-13A Relocation Expense Report PDF-fil, PDF print UCN-15436 Gifts and Grants Request PDF-fil, Word UCN-16708 Request for Authorization to Ship SNM or Non-SNM Material (U) Word UCN-16790A Approval of Product Returned for Accountable Material and Non-Accountable Weapons Material (U) PDF print UCN-20650 Statement of Interest in Maintaining Section 3161 Employment Eligibility PDF-fil UCN-20904 Supplier Qualification Questionnaire Word

367

U.S. Department of Energy NEPA Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Select the appropriate categorical exclusion(s) from Appendix B to Subpart D of 10 CFR Part 1021 (for Appendix (A) use bottom two pull-down menus) Select the appropriate categorical exclusion(s) from Appendix B to Subpart D of 10 CFR Part 1021 (for Appendix (A) use bottom two pull-down menus) 1) Develop an energy efficiency and conservation strategy, 2) technical consultant to conduct an analysis of the potential for a biomass to energy project, 3) hire a Sustainability Coordinator, 4) create an enhanced residential curbside recycling program, 5) streetlight retrofits. The original forms were signed by Gary Hartman on behalf of EERE on 4/1/2010. The original CX determination form is attached. Oak Ridge Office EEC Strategy and Analysis, Retrofits and Recycling Program MI- City- Dearborn Print Form for Records Submit to Website Submit via Email X- A9 - Information gathering/data analysis/document preparation/dissemination

368

How to Submit Forms: Exclusionary List: For the PC Electronic Data  

U.S. Energy Information Administration (EIA) Indexed Site

For the PC Electronic Data For the PC Electronic Data - DATE OF THIS REPORT: 1 3 Reseller/Retailer 2 4 Retailer 1 3 Sold or leased to another firm. See PART 3 of the instructions. 2 4 Permanently ceased operation. See PART 3 of the instructions. https://signon.eia.doe.gov/upload/noticeoog.jsp Reporting Option (PEDRO) software, call (202) 586- 9659. Mailing Address: City: OOG.SURVEYS@eia.doe.gov Email: Electronic Transmission: Physical Address: Fax No.: (e.g., Street Address, Bldg, Floor, Suite) (e.g., PO Box, RR) Original Mo Day Call: Year Questions? Type of Report (Check One ): Number of States for which you are reporting: Year Company Name: http://www.eia.gov/survey/form/eia_782a/list782a.pdf Instructions: http://www.eia.gov/survey/form/eia_782a/instructions.pdf FORM EIA-782A REFINERS'/GAS PLANT OPERATORS' MONTHLY PETROLEUM PRODUCT SALES REPORT

369

Hawaii Water Quality Certification Form | Open Energy Information  

Open Energy Info (EERE)

Form Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: Hawaii Water Quality Certification Form Form Type ApplicationNotice Form Topic Water Quality...

370

Methods of forming semiconductor devices and devices formed using such methods  

DOE Patents (OSTI)

Single source precursors are subjected to carbon dioxide to form particles of material. The carbon dioxide may be in a supercritical state. Single source precursors also may be subjected to supercritical fluids other than supercritical carbon dioxide to form particles of material. The methods may be used to form nanoparticles. In some embodiments, the methods are used to form chalcopyrite materials. Devices such as, for example, semiconductor devices may be fabricated that include such particles. Methods of forming semiconductor devices include subjecting single source precursors to carbon dioxide to form particles of semiconductor material, and establishing electrical contact between the particles and an electrode.

Fox, Robert V; Rodriguez, Rene G; Pak, Joshua

2013-05-21T23:59:59.000Z

371

USHER: Improving Data Quality with Dynamic Forms  

E-Print Network (OSTI)

Abstract Data quality is a critical problem in modern databases. Data entry forms present the first and arguably best opportunity for detecting and mitigating errors, but there has been little research into automatic methods for improving data quality at entry time. In this paper, we propose USHER, an endto-end system for form design, entry, and data quality assurance. Using previous form submissions, USHER learns a probabilistic model over the questions of the form. USHER then applies this model at every step of the data entry process to improve data quality. Before entry, it induces a form layout that captures the most important data values of a form instance as quickly as possible. During entry, it dynamically adapts the form to the values being entered, and enables real-time feedback to guide the data enterer toward their intended values. After entry, it re-asks questions that it deems likely to have been entered incorrectly. We evaluate all three components of USHER using two real-world data sets. Our results demonstrate that each component has the potential to improve data quality considerably, at a reduced cost when compared to current practice. I.

Kuang Chen; Harr Chen; Neil Conway; Joseph M. Hellerstein; Tapan S. Parikh

372

Superplastic forming using NIKE3D  

SciTech Connect

The superplastic forming process requires careful control of strain rates in order to avoid strain localizations. A load scheduler was developed and implemented into the nonlinear finite element code NIKE3D to provide strain rate control during forming simulation and process schedule output. Often the sheets being formed in SPF are very thin such that less expensive membrane elements can be used as opposed to shell elements. A large strain membrane element was implemented into NIKE3D to assist in SPF process modeling.

Puso, M.

1996-12-04T23:59:59.000Z

373

Phenomenology of the Deuteron Electromagnetic Form Factors  

E-Print Network (OSTI)

A rigorous extraction of the deuteron charge form factors from tensor polarization data in elastic electron-deuteron scattering, at given values of the 4-momentum transfer, is presented. Then the world data for elastic electron-deuteron scattering is used to parameterize, in three different ways, the three electromagnetic form factors of the deuteron in the 4-momentum transfer range 0-7 fm^-1. This procedure is made possible with the advent of recent polarization measurements. The parameterizations allow a phenomenological characterization of the deuteron electromagnetic structure. They can be used to remove ambiguities in the form factors extraction from future polarization data.

TheJLAB t20 collaboration; D. Abbott

2000-02-25T23:59:59.000Z

374

Regeneration of Lost Parts in Animals  

NLE Websites -- All DOE Office Websites (Extended Search)

Regeneration of Lost Parts in Animals Regeneration of Lost Parts in Animals Nature Bulletin No. 751 April 11, 1964 Forest Preserve District of Cook County Seymour Simon, President David H. Thompson, Senior Naturalist REGENERATION OF LOST PARTS IN ANIMALS For ages, mankind has been fascinated with the idea that lost parts of animals can be regrown. According to Greek legend, one of the twelve "labors" of Hercules was the destruction of the Hydra, a gigantic monster with nine serpents' heads. Finding that as soon as one head was cut off two new ones grew in its place, at last he burned out their roots with firebrands. All animals have the power of regeneration to a greater or lesser degree. In man and higher animals it is quite limited. We see it most often in the healing of wounds and the mending of bones. A lost fingernail can be replaced but not a lost finger. Lower animals have a much greater ability to replace parts. For instance, the little half-inch flatworm, Planaria, that lives under rocks in clean creeks can be cut into as many as 32 pieces and each fragment is able to rebuild a miniature flatworm complete with head, tail, eyes, mouth and internal organs.

375

C:\Forms\DOE F 3220.5.cdr  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5 5 (8/86) (8/86) PREVIOUSLY AD-37 (All other editions are obsolete) PRIVACY ACT STATEMENT, Information about an individual called for on this form and which pertains to the individual's rights benefits and privileges may become part of a "System of Records" subject to the Privacy Act of 1974. That Act provides that information be collected directly from the individual to the greatest extent practicable, and that such records pertaining to him are subject to his access upon request. The purpose of the information is to provide the basis for DOE review and approval of contractor employee's compensation for reimbursement at the specified level under the contract. If information is inadequate or incomplete, action on the request may be delayed or withheld.

376

Directory of Energy Data Collection Forms: Forms in use as of October 1996  

SciTech Connect

This is the twentieth edition of the Directory of Energy Collection Data Forms, an authoritative listing of selected public use forms currently used as basic energy information gathering tools by the Department of Energy.

NONE

1996-12-01T23:59:59.000Z

377

Form-1 2013, Page 1 Form1: Summary of Grant Project  

E-Print Network (OSTI)

Form-1 2013, Page 1 Form1: Summary of Grant Project (Due 1 month after the Grant End Date) 1. Grant Institution(s):__________________________________________________________________ 3. Grant Start Date:_____________________ Grant End Date:__________________________ If Grant Was Extended, Revised Grant End Date

Sheridan, Jennifer

378

SENIOR PROJECT APPROVAL FORM Submit this completed form with your Honors Senior Project  

E-Print Network (OSTI)

SENIOR PROJECT APPROVAL FORM Submit this completed form with your Honors Senior Project I. PERSONAL: _______________________________________ Classification: Junior Senior II. PROJECT INFORMATION Type of Project: Thesis Group Project Internship Creative Project Study Abroad Service Learning Project Title

Huang, Haiying

379

Conference Housing Reservation Form Please print and mail this form to the address below.  

E-Print Network (OSTI)

Conference Housing Reservation Form Please print and mail this form to the address below. UNO: 504-280-5584 Conference Group Information Group Name: ___________________________ _________ Number group participants under the age of 18, one chaperone is required.) Conference Sponsor (for billing

Kulp, Mark

380

TESTING FORM Please deliver exams with envelope & testing form at least 24 hours in advance to  

E-Print Network (OSTI)

TESTING FORM Please deliver exams with envelope & testing form at least 24 hours in advance to: _________________________________ Class Time: __________ - __________ _________ Test Date: _______________________________ Time allotted): ____________________________ INSTRUCTOR PROCEDURES: 1. Please deliver tests to WYLY TOWER 318 at least 24 hours PRIOR to test time

Selmic, Sandra

Note: This page contains sample records for the topic "form 715-01 part" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

APPLICATION FO FLOW FORMING FOR USE IN RADIOACTIVE MATERIAL PACKAGING DESIGNS  

SciTech Connect

This paper reports on the development and testing performed to demonstrate the use of flow forming as an alternate method of manufacturing containment vessels for use in radioactive material shipping packaging designs. Additionally, ASME Boiler and Pressure Vessel Code, Section III, Subsection NB compliance along with the benefits compared to typical welding of containment vessels will be discussed. SRNL has completed fabrication development and the testing on flow formed containment vessels to demonstrate the use of flow forming as an alternate method of manufacturing a welded 6-inch diameter containment vessel currently used in the 9975 and 9977 radioactive material shipping packaging. Material testing and nondestructive evaluation of the flow formed parts demonstrate compliance to the minimum material requirements specified in applicable parts of ASME Boiler and Pressure Vessel Code, Section II. Destructive burst testing shows comparable results to that of a welded design. The benefits of flow forming as compared to typical welding of containment vessels are significant: dimensional control is improved due to no weld distortion; less final machining; weld fit-up issues associated with pipes and pipe caps are eliminated; post-weld non-destructive testing (i.e., radiography and die penetrant tests) is not necessary; and less fabrication steps are required. Results presented in this paper indicate some of the benefits in adapting flow forming to design of future radioactive material shipping packages containment vessels.

Blanton, P.; Eberl, K.; Abramczyk, G.

2012-07-11T23:59:59.000Z

382

Forming Analysis of AZ31 Magnesium Alloy Sheets by Means of a Multistep Inverse Approach  

SciTech Connect

This paper applies a multi-step inverse approach to predict the forming of AZ31 magnesium alloy sheets. An in-house finite element code named INAPH, which implements the inverse approach formulation by Guo et al. (Int. J. Numer. Methods Eng., 30, 1385-1401), has been used for the forming analysis. This inverse approach uses the deformation theory of plasticity and assumes that the deformation is independent of the loading history. Failure during forming is predicted by a stress-based criterion or a forming limit diagram-based criterion. The INAPH predictions have been compared with experimental results of Takuda et al (Journal of Materials Processing Technology, 89-90:135-140) and incremental analysis using ABAQUS. The multi-step inverse analysis has been shown to very quickly and fairly accurately predict stress, plastic strain, thickness distributions and failure locations on deeply drawn parts made of AZ31 magnesium alloy. The capability of INAPH to predict the formability of magnesium alloys has also been demonstrated at various temperatures. As magnesium alloys possess very limited formability at room temperature, and their formability becomes better at higher temperatures (> 100oC), the inverse analysis constitutes an efficient and valuable tool to predict forming of magnesium alloy parts as a function of temperature. In addition, other processing and design parameters such as the initial dimensions, final desired shape, blank holder forces, and friction can be quickly adjusted to assess the forming feasibility.

Nguyen, Ba Nghiep; Bapanapalli, Satish K.

2009-04-01T23:59:59.000Z

383

The NERSC Allocation Request Form (ERCAP)  

NLE Websites -- All DOE Office Websites (Extended Search)

NIM (NERSC Information Management portal) NIM (NERSC Information Management portal) Awarded projects Policies Data Analytics & Visualization Data Management Policies Science Gateways User Surveys NERSC Users Group User Announcements Help Operations for: Passwords & Off-Hours Status 1-800-66-NERSC, option 1 or 510-486-6821 Account Support https://nim.nersc.gov accounts@nersc.gov 1-800-66-NERSC, option 2 or 510-486-8612 Consulting http://help.nersc.gov consult@nersc.gov 1-800-66-NERSC, option 3 or 510-486-8611 How to Submit a 2014 ERCAP Request Home » For Users » Accounts & Allocations » Allocations » Allocation Request Form (ERCAP) Show All | 1 2 3 4 5 ... 16 | Next » The NERSC Allocation Request Form (ERCAP) Requests to use NERSC resources are submitted annually via a web form known as the ERCAP (Energy Research Computing Allocations Process) Request Form.

384

Benefits Forms and Information | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

New Employee Orientation » Benefits Forms and New Employee Orientation » Benefits Forms and Information Benefits Forms and Information As a Federal employee, you may have the opportunity to participate in a number of employee benefit and family-friendly programs. If your appointment to Federal employment confers eligibility, you may elect to participate in health, dental, and life insurance programs; retirement savings plans; flexible spending accounts; long-term care insurance; and vacation and sick leave. In addition, there are a number of family-friendly programs that the Department of Energy (DOE) offers its employees, such as alternative work schedules, flexiplace/telecommuting, transit subsidy, child development centers, and exercise and wellness facilities. The employment forms found in this section collect important and necessary

385

DUF6 Final EIS Document Request Form  

NLE Websites -- All DOE Office Websites (Extended Search)

EIS Request Form EIS Request Form Final EIS Document Request Form Use the form below to order copies of the DUF6 Conversion Facility Final EISs and Records of Decision. Step 3 Select the EIS that you want to receive. Select one of the three options below. My request applies to the Paducah Conversion Facility EIS My request applies to the Portsmouth Conversion Facility EIS My request applies to both the Paducah and the Portsmouth Conversion Facility EISs Step 1 Request EIS copies. Choose one or more of the following: Mail me a compact disc (CD-ROM) of the Final EIS and Record of Decision. Mail me a printed copy of the Final EIS and Record of Decision. Step 2 Enter your personal information. You must submit your full name and complete address including zip code to receive postal mail. You must provide an email address if you want to receive email notifications.

386

EOTA - Business Form Document Title: Nonconformance Report  

NLE Websites -- All DOE Office Websites (Extended Search)

5 Nonconformance Report 07_1206.doc 07_1206 Page 1 of 3 5 Nonconformance Report 07_1206.doc 07_1206 Page 1 of 3 EOTA - Business Form Document Title: Nonconformance Report Document Number: F-015 Rev. 07_12-06 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: P-011, Nonconforming Material / Product Process Notify of Changes: EOTA Employees Referenced Document(s): N/A F-015 Nonconformance Report 07_1206.doc 07_1206 Page 2 of 3 Revision History: Rev. Description of Change A Initial Release 07_1206 Converted form F-015 to a Word Form. Changed layout of form. No content changes were done. C D E F-015 Nonconformance Report 07_1206.doc 07_1206 Page 1 of 1 Nonconformance Report (NCR) General Information NCR # -

387

Form:Reference | Open Energy Information  

Open Energy Info (EERE)

Form Form Edit History Facebook icon Twitter icon » Form:Reference Jump to: navigation, search Input the title of a Reference below. If the reference already exists, you will be able to edit its information. Add/Edit Reference The text entered into this field will be used as the name of the reference; for example, the title of a book or name of the journal article. Example references Claritas Rise, Mars- Pre-Tharsis Magmatism? An Improved Equilibrium-Kinetics Speciation Algorithm For Redox Reactions In Variably Saturated Subsurface Flow Systems True-Temperature Determination Of Geothermal Reservoirs ... further results This form and reference requirements are based on the Council of Science Editors (CSE) (author-date) citation style. For more details about this

388

Form Approval: OMB No. 1905-0129  

U.S. Energy Information Administration (EIA) Indexed Site

Due Date: 2013 Due Date: 2013 Form Approval: OMB No. 1905-0129 Approval Expires: 12/31/2015 Burden hours: 0.75 SCHEDULE 1. IDENTIFICATION Contact Information Form EIA-861S ANNUAL ELECTRIC POWER INDUSTRY REPORT (Short Form) NOTICE: This report is mandatory under the Federal Energy Administration Act of 1974 (Public Law 93-275). Failure to comply may result in criminal fines, civil penalties and other sanctions as provided by law. For further information concerning sanctions and data protections see the provisions on sanctions and the provisions concerning the confidentiality of information in the instructions. Title 18 U.S.C. 1001 makes it a criminal offense for any person knowingly and willingly to make to any Agency or Department of the United States any false, fictitious, or fraudulent statements as to any matter within its jurisdiction. Entities that report using the Form EIA-861 do

389

Hypergeometric Forms for Ising-Class Integrals  

E-Print Network (OSTI)

Hypergeometric forms for Ising-class integrals D.H. Bailey ?C n,1 relevant to the Ising theory of solid-state physics [E. Crandall, Integrals of the Ising class, J. Phys. A. :

Bailey, David H.; Borwein, David; Borwein, Jonathan M.; Crandall, Richard E.

2008-01-01T23:59:59.000Z

390

Winter Study Rebate Form 2012 Date______________________________ ID #________________________________  

E-Print Network (OSTI)

Winter Study Rebate Form 2012 Date______________________________ ID to receive your rebate? Credit term account______ EPH Dollars_______ WINTER STUDY REBATES ARE GIVEN 10 consecutive calendar days are entitled to a rebate Rebates will be calculated on a per day basis

Aalberts, Daniel P.

391

Winter Study Rebate Form 2013 Date______________________________ ID #________________________________  

E-Print Network (OSTI)

Winter Study Rebate Form 2013 Date______________________________ ID to receive your rebate? Credit term account______ EPH Dollars_______ WINTER STUDY REBATES ARE GIVEN 10 consecutive calendar days are entitled to a rebate Rebates will be calculated on a per day basis

Aalberts, Daniel P.

392

Furman University Cell Phone Allowance Request Form  

E-Print Network (OSTI)

Furman University Cell Phone Allowance Request Form Date Payment: $___________ All cell phone allowance payments are departmental responsibility and considered other compensation charged to object code ________. The cell phone allowance will start at the next

393

A Bakery : in search of appropriate form  

E-Print Network (OSTI)

During the process of designing a building there occurs the continuous task of finding the forms, materials and structure that are fit to the particular building or situation at hand. It is the intent to combine these ...

Kuzmic, Katri

1982-01-01T23:59:59.000Z

394

Front contact solar cell with formed emitter  

SciTech Connect

A bipolar solar cell includes a backside junction formed by an N-type silicon substrate and a P-type polysilicon emitter formed on the backside of the solar cell. An antireflection layer may be formed on a textured front surface of the silicon substrate. A negative polarity metal contact on the front side of the solar cell makes an electrical connection to the substrate, while a positive polarity metal contact on the backside of the solar cell makes an electrical connection to the polysilicon emitter. An external electrical circuit may be connected to the negative and positive metal contacts to be powered by the solar cell. The positive polarity metal contact may form an infrared reflecting layer with an underlying dielectric layer for increased solar radiation collection.

Cousins, Peter John

2014-11-04T23:59:59.000Z

395

Front contact solar cell with formed emitter  

DOE Patents (OSTI)

A bipolar solar cell includes a backside junction formed by an N-type silicon substrate and a P-type polysilicon emitter formed on the backside of the solar cell. An antireflection layer may be formed on a textured front surface of the silicon substrate. A negative polarity metal contact on the front side of the solar cell makes an electrical connection to the substrate, while a positive polarity metal contact on the backside of the solar cell makes an electrical connection to the polysilicon emitter. An external electrical circuit may be connected to the negative and positive metal contacts to be powered by the solar cell. The positive polarity metal contact may form an infrared reflecting layer with an underlying dielectric layer for increased solar radiation collection.

Cousins, Peter John (Menlo Park, CA)

2012-07-17T23:59:59.000Z

396

USHER: Improving data quality with dynamic forms  

E-Print Network (OSTI)

Data quality is a critical problem in modern databases. Data entry forms present the first and arguably best opportunity for detecting and mitigating errors, but there has been little research into automatic methods for ...

Chen, Harr

397

Form:Policy Organization | Open Energy Information  

Open Energy Info (EERE)

Policy Organization Input your policy organization name below to add to the registry. If your policy organization is already in the registry, the form will be populated with that...

398

FAQs for Survey Form EIA-856  

Annual Energy Outlook 2012 (EIA)

after the close of the reference month. For example, if the reference month is March 2013, the report must be submitted to EIA by April 30, 2013. Completed forms may be...

399

MECHANICAL ENGINEERING TRAVEL AUTHORIZATION INFORMATION FORM  

E-Print Network (OSTI)

. ______________ Estimated Cost AMOUNT Transportation (Does not include USC vehicle) Subsistence Other Expenses (EXPLAINMECHANICAL ENGINEERING TRAVEL AUTHORIZATION INFORMATION FORM Requested) Estimated Total Cost Account(s) to be charged Dept. Fund Class Analytical Amount** Method of Travel Common

Sutton, Michael

400

MDF Form and Function (Text Version)  

Energy.gov (U.S. Department of Energy (DOE))

This is a text version of the Manufacturing Demonstration Facilities (MDF) Form and Function video, originally presented on March 12, 2012 at the MDF Workshop held in Chicago, Illinois.

Note: This page contains sample records for the topic "form 715-01 part" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

student handbook forms Shawwal 18, 1424  

E-Print Network (OSTI)

student handbook forms Shawwal 18, 1424 THREE-MEMBER ADVISING COMMITTEE (TMC) REPORT, INITIAL MEETING DEGREE PROGRAM IN SCIENTIFIC COMPUTATION Student:_______________________________________________________________________________ ____________________________________________________________________________________ 2. Comments concerning student plans and recommendations: If student is entering as an advanced

Thomas, David D.

402

Form:Dataset | Open Energy Information  

Open Energy Info (EERE)

Input your dataset name below to add to the registry. If the dataset is already in the registry, the form will be populated with that dataset's fields and you may edit. Submit...

403

Machining and Technical Services Service Request Form  

E-Print Network (OSTI)

Machining and Technical Services Service Request Form Clemson University - College of Engineering $35 $60 $55 $90 $52.50 $82.50 Total Labor EDM Hours Outside Hours Outside EDM Hours Priority -

Duchowski, Andrew T.

404

Machining and Technical Services Service Request Form  

E-Print Network (OSTI)

Machining and Technical Services Service Request Form 2010-2011 Clemson University - College: Hours Price per hour Amount $35 $60 $55 $90 $52.50 $82.50 Total Labor EDM Hours Outside Hours Outside EDM Hours Priority -

Duchowski, Andrew T.

405

Taylor forms use and limits Arnold Neumaier  

E-Print Network (OSTI)

of asteroid dynamics in the solar system in 2001. Apart from summarizing what Taylor forms are and do, cluster effect, computer-assisted proof, constraint propagation, dependence, interval arithmetic

Neumaier, Arnold

406

On the signature of the Shapovalov form  

E-Print Network (OSTI)

Classifying the irreducible unitary representations of a real reductive group is equivalent to the algebraic problem of classifying the Harish-Chandra modules admitting a positive definite invariant Hermitian form. Finding ...

Yee, Wai Ling, 1977-

2004-01-01T23:59:59.000Z

407

Assessment of Preferred Depleted Uranium Disposal Forms  

SciTech Connect

The Department of Energy (DOE) is in the process of converting about 700,000 metric tons (MT) of depleted uranium hexafluoride (DUF6) containing 475,000 MT of depleted uranium (DU) to a stable form more suitable for long-term storage or disposal. Potential conversion forms include the tetrafluoride (DUF4), oxide (DUO2 or DU3O8), or metal. If worthwhile beneficial uses cannot be found for the DU product form, it will be sent to an appropriate site for disposal. The DU products are considered to be low-level waste (LLW) under both DOE orders and Nuclear Regulatory Commission (NRC) regulations. The objective of this study was to assess the acceptability of the potential DU conversion products at potential LLW disposal sites to provide a basis for DOE decisions on the preferred DU product form and a path forward that will ensure reliable and efficient disposal.

Croff, A.G.; Hightower, J.R.; Lee, D.W.; Michaels, G.E.; Ranek, N.L.; Trabalka, J.R.

2000-06-01T23:59:59.000Z

408

MU PURCHASING CARD CARDHOLDER ENROLLMENT / CHANGE FORM  

E-Print Network (OSTI)

MU PURCHASING CARD CARDHOLDER ENROLLMENT / CHANGE FORM Action: ( ) Initial Enrollment ( ) Change/WBS/Internal Order # _________________________________________ Office Phone transaction limit Any increase in limits and type of charge (MCC Code) must be approved by the Purchasing

Hardy, Christopher R.

409

Interpreting Alaminos : the cultural context of form  

E-Print Network (OSTI)

This thesis presents a methodology for transforming designs from their traditional context to a new, though continuous, form. In particular, this thesis examines the interactional role of holism - and its underlying ...

Larkin, Celine M

1983-01-01T23:59:59.000Z

410

Pulse Pressure Forming of Lightweight Materials, Development...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C. lm015smith2010o.pdf More Documents & Publications Pulse-Pressure Forming of Lightweight Metals...

411

ADEQ Water Quality Forms | Open Energy Information  

Open Energy Info (EERE)

search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: ADEQ Water Quality FormsLegal Abstract The Arizona Department of Environmental Quality (ADEQ)...

412

ADNR Water Forms | Open Energy Information  

Open Energy Info (EERE)

search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: ADNR Water FormsLegal Abstract The Alaska Department of Natural Resources (ADNR) provides various...

413

Improving data quality with dynamic forms  

E-Print Network (OSTI)

Organizations in developing regions want to efficiently collect digital data, but standard data gathering practices from the developed world are often inappropriate. Traditional techniques for form design and data quality ...

Chen, Kuang

414

Indeterminate liberal form : public space in sprawl  

E-Print Network (OSTI)

The question of public space in sprawl is largely ignored, even as sprawl becomes the contemporary reality for more and more of us. This thesis defines a theory of Indeterminate Public Form and proposes the use of computational ...

Rothenberg, John (John Hershel)

2007-01-01T23:59:59.000Z

415

Data Abstraction Form for population PK, PD publications MODEL BUILDING Data Abstraction Form  

E-Print Network (OSTI)

Data Abstraction Form for population PK, PD publications MODEL BUILDING 1 Data Abstraction Form for population PK/PD publications MODEL BUILDING Brendel K.1* , Dartois C.2* , Comets E.1 , Lemenuel-Diot A.3;Data Abstraction Form for population PK, PD publications MODEL BUILDING 2 Table of contents Purpose

Boyer, Edmond

416

Directory of Energy Data Collection Forms: Forms in use as of October 1993  

SciTech Connect

This is the seventeenth edition of the Directory of Energy Data Collection forms, an authoritative listing of selected public use forms currently used as basic energy information gathering tools by the Department of Energy (DOE). Originally entitled EIA Data Collection forms, this directory provides an overview of DOE`s energy information collection programs for decisionmakers in Government and industry.

Not Available

1993-12-28T23:59:59.000Z

417

Re: Ex parte communication | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Re: Ex parte communication Re: Ex parte communication Re: Ex parte communication On April 20, 2010, Scott Bates, Corporate Vice President and General Counsel, and Karen Meyers, Director of Government Affairs, both of the Rheem Manufacturing Company ("Rheem"), accompanied by their counsel, Bill Anaya of Alston & Bird, LLP, met with Department of Energy ("DOE") officials Scott Harris, General Counsel, Maureen McLaughlin, Special Assistant to the General Counsel, and Stephanie Weiner, Special Assistant, Office of the General Counsel. At the meeting, Rheem applauded the leadership being provided by the Office of the General Counsel across a broad portfolio of policies and initiatives. Participants discussed Rheem's engagement as a company that brings a broad range of products, including air conditioners, furnaces,

418

Re: Ex parte communication | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Ex parte communication Ex parte communication Re: Ex parte communication On April 20, 2010, Scott Bates, Corporate Vice President and General Counsel, and Karen Meyers, Director of Government Affairs, both of the Rheem Manufacturing Company ("Rheem"), accompanied by their counsel, Bill Anaya of Alston & Bird, LLP, met with Department of Energy ("DOE") officials Scott Harris, General Counsel, Maureen McLaughlin, Special Assistant to the General Counsel, and Stephanie Weiner, Special Assistant, Office of the General Counsel. At the meeting, Rheem applauded the leadership being provided by the Office of the General Counsel across a broad portfolio of policies and initiatives. Participants discussed Rheem's engagement as a company that brings a broad range of products, including air conditioners, furnaces,

419

10 CFR Part 830, Nuclear Safety Management  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

10 10 Federal Register / Vol. 66, No. 7 / Wednesday, January 10, 2001 / Rules and Regulations issued August 5, 1998, are adopted as a final rule with the following change: PART 1446-PEANUTS 1. The authority citation for part 7 CFR part 1446 continues to read as follows: Authority: 7 U.S.C. 7271; 15 U.S.C. 714b and 714c. 2. Paragraph (c) of § 1446.102 is amended by adding a new sentence to the end of the paragraph to read as follows: § 1446.102 Administration. * * * * * (c) Supervisory authority. * * * Further, the Director of TPD, FSA, may authorize the wavier or modification of deadlines and other requirements, except statutory deadlines or requirements, in cases where lateness or the failure to meet such other requirements does not adversely affect operation of the program. 3. Paragraph (3) of the definition of

420

Method for forming cooperative binary ionic solids  

DOE Patents (OSTI)

A nanostructured molecular unit and method for forming is described where a cationic porphyrin having an ethanolic substituent species and a metal in the porphyrin cavity is combined with an anionic porphyrin having a sulfonate substituent species and a metal in the porphyrin cavity to form by self-assembly a nanostructured molecular unit with a morphology comprising four dendritic elements connected at a central node.

Shelnutt, John A.; Martin, Kathleen E.; Wang, Zhongchun; Medforth, Craig J.

2014-09-09T23:59:59.000Z

Note: This page contains sample records for the topic "form 715-01 part" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Singular Value Decomposition (SVD) and Polar Form  

E-Print Network (OSTI)

g always have the same non-zero eigen- values! Furthermore, if E = F, then 0 is an eigenvalue for fChapter 2 Singular Value Decomposition (SVD) and Polar Form 2.1 Polar Form In this chapter, we = f(u), f(v) = u, (f f)(v) . Similarly, f f is self-adjoint. 29 #12;30 CHAPTER 2. SINGULAR VALUE

Gallier, Jean

422

BERA Forms, Brookhaven Employees Recreation Association (BERA)  

NLE Websites -- All DOE Office Websites (Extended Search)

Forms Forms PDF Adobe Acrobat Reader is needed to view some files on this page. Get Reader | troubleshoot Request to serve Alcohol on-Site Form and Alcohol Policy (pdf) Guidelines to start a new BERA Club/Activity (pdf) Injury Report Form (pdf) Confirmation of Medical Insurance Receipt (pdf) BERA Club Activities - Insurance Information Weight Room or fitness activities: Any contractor or family member (this includes spouse/partner, adult children, guests/contractors) wishing to use the Weight Room MUST present a copy of their medical insurance card and initial a receipt that states they have insurance in place in order to participate in any fitness activities or the weight room. The Recreation Office (Bldg 400) will keep this receipt on file. BERA League Sports: BSA paid employees must fill out this BERA Sports Clearance Form* (pdf) and go through the clearance procedure with OMC @ 490 (not BERA Office). Once reviewed by OMC, the clearance form will be mailed to the player who must then furnish a copy to the captain in order to practice or play.

423

Part cost estimation at early design phase  

Science Journals Connector (OSTI)

Abstract Although 70% of part cost is determined during the early design stage, designers rarely accurately estimate the costs of their designs. Based on extensive literature review, in-depth industrial survey and close collaboration with multiple manufacturers, forty factors were identified as governing part cost and ranked according to cost impact. Based on parameter ranking and availability at the early stages of design, a cost estimator for designers is proposed. As the design progresses and more parameters become available, a more accurate cost model is derived and proposed to manufacturers. Results are analyzed and compared to actual manufacturing costing demonstrating good fit.

Gila Molcho; Asher Cristal; Moshe Shpitalni

2014-01-01T23:59:59.000Z

424

Method of forming aluminum oxynitride material and bodies formed by such methods  

DOE Patents (OSTI)

Methods of forming aluminum oxynitride (AlON) materials include sintering green bodies comprising aluminum orthophosphate or another sacrificial material therein. Such green bodies may comprise aluminum, oxygen, and nitrogen in addition to the aluminum orthophosphate. For example, the green bodies may include a mixture of aluminum oxide, aluminum nitride, and aluminum orthophosphate or another sacrificial material. Additional methods of forming aluminum oxynitride (AlON) materials include sintering a green body including a sacrificial material therein, using the sacrificial material to form pores in the green body during sintering, and infiltrating the pores formed in the green body with a liquid infiltrant during sintering. Bodies are formed using such methods.

Bakas, Michael P. (Ammon, ID) [Ammon, ID; Lillo, Thomas M. (Idaho Falls, ID) [Idaho Falls, ID; Chu, Henry S. (Idaho Falls, ID) [Idaho Falls, ID

2010-11-16T23:59:59.000Z

425

News/Forms/Annual Report/Templates | Department of Energy  

Office of Environmental Management (EM)

NewsFormsAnnual ReportTemplates NewsFormsAnnual ReportTemplates Newsletters and Latest Publications Newsletters Forms Annual Report to OMB Templates...

426

Lobbyist Disclosure Form - Silicon Valley | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Lobbyist Disclosure Form - Silicon Valley.pdf More Documents & Publications Lobbyist Disclosure Form - AltEn Lobbyist Disclosure Form - First Solar Interested Parties - Shipp...

427

Annual Electric Utility Data - Form EIA-906 Database  

Annual Energy Outlook 2012 (EIA)

Detailed data files > Historic Form EIA-906 Historic Form EIA-906 Detailed Data with previous form data (EIA-759) Historic electric utility data files include information on net...

428

DOE/NRC Forms | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

NMMSS Information, Reports & Forms DOENRC Forms DOENRC Forms U.S. Department of Energy U.S. Nuclear Regulatory Commission Nuclear Materials Management & Safeguards...

429

Report of Waste Discharge application (Form 200) | Open Energy...  

Open Energy Info (EERE)

application (Form 200) Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: Report of Waste Discharge application (Form 200) Abstract Persons discharging or...

430

Directory of energy data collection forms. Forms in use as of October 1995  

SciTech Connect

This is an authoritative listing of selected public use forms currently used as basic energy information gathering tools by the Department of Energy (DOE). This directory provides an overview of DOE`s energy information collection programs for decisionmakers in Government and industry. Forms designed to collect energy information and used by the Energy Information Administration (EIA) as of October 1995 are included in this directory. For each form listed in this directory, an abstract is included that describes the form`s uses, its respondents, and the data collected. For the reader`s convenience in finding specific types of collections, several indices have been provided in this directory. A listing of the forms grouped by energy source and function begins on page 26. Beginning on page 38 are the publications derived from the collections, and on page 50, are the forms linked to general respondent categories.

NONE

1996-01-01T23:59:59.000Z

431

Engineering Economy Outline IE 305-Part 1  

E-Print Network (OSTI)

Rates A fundamental activity of engineering economics is the analysis of the value of a series of cash economic equivalence. Stephen B. Vardeman (ISU) Engineering Economy Outline Fall 2013 7 / 53 #12;ConstantEngineering Economy Outline IE 305-Part 1 Stephen B. Vardeman ISU Fall 2013 Stephen B. Vardeman

Vardeman, Stephen B.

432

Advanced Algorithms Course. Lecture Notes. Part 2  

E-Print Network (OSTI)

Advanced Algorithms Course. Lecture Notes. Part 2 Set Cover This is a very fundamental problem approximation algorithm. A natural greedy rule is to successively add sets Si to the solution, that cover Si be the set that covers this sj in the greedy algorithm. Since the algorithm always picks an Si

Damaschke, Peter

433

Advanced Algorithms Course. Lecture Notes. Part 12  

E-Print Network (OSTI)

Advanced Algorithms Course. Lecture Notes. Part 12 Set Cover on Few Elements Consider an instance of Set Cover where the ground set U has only a small number k of elements, say x1, . . . , xk. Still there may exist up to 2k different sets Si U to choose from. Set Cover is trivially an FPT problem

Damaschke, Peter

434

Advanced Algorithms Course. Lecture Notes. Part 13  

E-Print Network (OSTI)

Advanced Algorithms Course. Lecture Notes. Part 13 Set Cover on Few Elements Consider an instance of Set Cover where the ground set U has only a small number k of elements, say x1, . . . , xk. Still there may exist up to 2k different sets Si U to choose from. Set Cover is trivially an FPT problem

Damaschke, Peter

435

ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 194  

E-Print Network (OSTI)

of radioactive waste. If the Administrator of EPA determines that the WIPP will comply with the standards radioactive waste in the Waste Isolation Pilot Plant (WIPP). The EPA previously promulgated 40 CFR Part 191-Level and Transuranic Radioactive Wastes," to provide standards that will apply to all sites (except Yucca Mountain

436

Afternoon Session-Part 1 Energy Harvesting  

E-Print Network (OSTI)

electricity from surrounding environment light, vibration, heat, radio waves... 7/27/2011Wireless InformationAfternoon Session- Part 1 Energy Harvesting Wireless Networks Aylin Yener yener@ee.psu.edu Wireless with "rechargeable nodes" 7/27/2011Wireless Information Theory Summer School in Oulu, Finland #12;Introduction

Ulukus, Sennur

437

PART I THE POLICY CHALLENGES CLIMATE CHANGE  

E-Print Network (OSTI)

parts of the West Antarctic and Greenland ice sheets could catastrophically raise sea levels by over 1 already been released, and because the green- house gases (GHG) that cause climate change stay unless techno- logical advances enable us to extract GHGs from the atmosphere.The Intergovernmental Panel

438

Heart Physiology Lab Part 1: Pulse Rate  

E-Print Network (OSTI)

Heart Physiology Lab Part 1: Pulse Rate Measure your pulse in each of the following conditions (in in the class. You may use Table 1 in the Heart Physiology Worksheet for this, if you wish. Once you have all of the class averages for each measurement. You may use Graph 1 in the Heart Physiology Worksheet for this

Loughry, Jim

439

Computed tomography on small explosive parts  

SciTech Connect

We have investigated three small explosive parts for the Pantex Plant in Amarillo, Texas using computed tomography (CT). A medium resolution, fan beam system was used to test imaging capabilities for small holes drilled into one of the parts, and to identify any inhomogeneities, cracks, voids, and inclusions if present in the other two parts. This system provides volumetric imaging. Its information is qualitative in that is allows us to see interior features but it cannot provide quantitative attenuation data. A second part of the investigation was to perform effective atomic number computed tomography on the parts using energy dispersive spectroscopy methods. We wanted to experimentally identify the {open_quotes}average{close_quotes} chemical composition of the materials in the explosive and its shell and to detect any possible inhomogeneities in composition. A single beam, nuclear spectroscopy based system was used for this work. The radiation source was a silver anode x-ray tube. By measuring x-ray attenuation at specific energies (characteristic lines and narrow bands of continuum) we are able to quantitatively determine linear attenuation coefficients. By using ratios of such measurements, density cancels out and we effectively have ratios of mass attenuation coefficients. Through a look-up scheme of mass attenuation coefficients for different elements, we can determine the weighted average chemical composition, as averaged by x-ray attenuation. We call this averaged composition the effective atomic number ({open_quotes}Z{sub eff}{close_quotes}). We thereby obtain cross sectional images of a parameter related to the averaged chemistry of the object. Such images and the underlying data can reveal, for instance, segregation of explosive and binder.

Ryon, R.W.

1994-05-01T23:59:59.000Z

440

Pacies (Part Code Identification Expert System): an expert system to generate part codes for the selection of small part feeding and orienting devices for use in automatic assembly  

E-Print Network (OSTI)

PACIES (PART CODE IDENTIFICATION EXPERT SYSTEM): AN EXPERT SYSTEM' TO GENERATE PART CODES FOR THE SELECTION OF SMALL PART FEEDING AND ORIENTING DEVICES FOR USE IN AUTOMATIC ASSEMBLY A Thesis by YU-TONG CHEN Submitted to the Graduate College... of Texas AAM University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE May 1985 Major Subject: Industrial Engineering PACIES (PART CODE IDENTIFICATION EXPERT SYSTEM): AN EXPERT SYSTEM TO GENERATE PART CODES...

Chen, Yu-Tong

2012-06-07T23:59:59.000Z

Note: This page contains sample records for the topic "form 715-01 part" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Recent INEL spray-forming developments  

SciTech Connect

Spray forming is a near-net-shape fabrication technology in which a spray of finely atomized liquid droplets is deposited onto a suitably shaped substrate or mold to produce a coherent solid. The technology offers unique opportunities for simplifying materials processing, oftentimes while substantially improving product quality. Spray forming can be performed with a wide range of metals and nonmetals, and offersproperty improvements resulting from rapid solidification (eg. refined microstructures, extended solid solubilities and reduced segregation). Economic benefits result from process simplification and the elimination of unit operations. Researchers at the Idaho National Engineering Laboratory (INEL) are developing spray-forming technology for producing near-net-shape solids and coatings of a variety of metals, polymers, and composite materials using de Laval nozzles. Results from several spray-forming programs are presented to illustrate the range of capabilities of the approach as well as the technical and economic benefits. These programs involved the production of low-carbon steel strip and SiC particulate reinforced aluminum strip; recent advances in spray forming tooling using low-melting-point metals are also described.

McHugh, K.M.; Key, J.F.

1992-12-31T23:59:59.000Z

442

DWPF waste form compliance plan (Draft Revision)  

SciTech Connect

The Department of Energy currently has over 100 million liters of high-level radioactive waste in storage at the Savannah River Site (SRS). In the late 1970`s, the Department of Energy recognized that there were significant safety and cost advantages associated with immobilizing the high-level waste in a stable solid form. Several alternative waste forms were evaluated in terms of product quality and reliability of fabrication. This evaluation led to a decision to build the Defense Waste Processing Facility (DWPF) at SRS to convert the easily dispersed liquid waste to borosilicate glass. In accordance with the NEPA (National Environmental Policy Act) process, an Environmental Impact Statement was prepared for the facility, as well as an Environmental Assessment of the alternative waste forms, and issuance of a Record of Decision (in December, 1982) on the waste form. The Department of Energy, recognizing that start-up of the DWPF would considerably precede licensing of a repository, instituted a Waste Acceptance Process to ensure that these canistered waste forms would be acceptable for eventual disposal at a federal repository. This report is a revision of the DWPF compliance plan.

Plodinec, M.J.; Marra, S.L.

1991-12-31T23:59:59.000Z

443

DWPF waste form compliance plan (Draft Revision)  

SciTech Connect

The Department of Energy currently has over 100 million liters of high-level radioactive waste in storage at the Savannah River Site (SRS). In the late 1970's, the Department of Energy recognized that there were significant safety and cost advantages associated with immobilizing the high-level waste in a stable solid form. Several alternative waste forms were evaluated in terms of product quality and reliability of fabrication. This evaluation led to a decision to build the Defense Waste Processing Facility (DWPF) at SRS to convert the easily dispersed liquid waste to borosilicate glass. In accordance with the NEPA (National Environmental Policy Act) process, an Environmental Impact Statement was prepared for the facility, as well as an Environmental Assessment of the alternative waste forms, and issuance of a Record of Decision (in December, 1982) on the waste form. The Department of Energy, recognizing that start-up of the DWPF would considerably precede licensing of a repository, instituted a Waste Acceptance Process to ensure that these canistered waste forms would be acceptable for eventual disposal at a federal repository. This report is a revision of the DWPF compliance plan.

Plodinec, M.J.; Marra, S.L.

1991-01-01T23:59:59.000Z

444

Formed Core Sampler Hydraulic Conductivity Testing  

SciTech Connect

A full-scale formed core sampler was designed and functionally tested for use in the Saltstone Disposal Facility (SDF). Savannah River National Laboratory (SRNL) was requested to compare properties of the formed core samples and core drilled samples taken from adjacent areas in the full-scale sampler. While several physical properties were evaluated, the primary property of interest was hydraulic conductivity. Differences in hydraulic conductivity between the samples from the formed core sampler and those representing the bulk material were noted with respect to the initial handling and storage of the samples. Due to testing conditions, the site port samples were exposed to uncontrolled temperature and humidity conditions prior to testing whereas the formed core samples were kept in sealed containers with minimal exposure to an uncontrolled environment prior to testing. Based on the results of the testing, no significant differences in porosity or density were found between the formed core samples and those representing the bulk material in the test stand.

Miller, D. H.; Reigel, M. M.

2012-09-25T23:59:59.000Z

445

On the projective dimension and the unmixed part of three cubics  

E-Print Network (OSTI)

Let R be a polynomial ring over a field in an unspecified number of variables. We prove that if J ? R is an ideal generated by three cubic forms, and the unmixed part of J contains a quadric, then the projective dimension of R/J is at most 4. To this end, we show that if K ? R is a three-generated ideal of height two and L ? R an ideal linked to the unmixed part of K, then the projective dimension of R/K is bounded above by the projective dimension of R/L plus one.

Bahman Engheta

446

Improving the phenomenology of K_{l3} form factors with analyticity and unitarity  

E-Print Network (OSTI)

The shape of the vector and scalar K_{l3} form factors is investigated by exploiting analyticity and unitarity in a model-independent formalism. The method uses as input dispersion relations for certain correlators computed in perturbative QCD in the deep Euclidean region, soft-meson theorems, and experimental information on the phase and modulus of the form factors along the elastic part of the unitarity cut. We derive constraints on the coefficients of the parameterizations valid in the semileptonic range and on the truncation error. The method also predicts low-energy domains in the complex $t$-plane where zeros of the form factors are excluded. The results are useful for K_{l3} data analyses and provide theoretical underpinning for recent phenomenological dispersive representations for the form factors.

Gauhar Abbas; B. Ananthanarayan; Irinel Caprini; I. Sentitemsu Imsong

2010-11-03T23:59:59.000Z

447

Improving the phenomenology of K{sub l3} form factors with analyticity and unitarity  

SciTech Connect

The shape of the vector and scalar K{sub l3} form factors is investigated by exploiting analyticity and unitarity in a model-independent formalism. The method uses as input dispersion relations for certain correlators computed in perturbative QCD in the deep Euclidean region, soft-meson theorems, and experimental information on the phase and modulus of the form factors along the elastic part of the unitarity cut. We derive constraints on the coefficients of the parameterizations valid in the semileptonic range and on the truncation error. The method also predicts low-energy domains in the complex t plane where zeros of the form factors are excluded. The results are useful for K{sub l3} data analyses and provide theoretical underpinning for recent phenomenological dispersive representations for the form factors.

Abbas, Gauhar; Ananthanarayan, B.; Imsong, I. Sentitemsu [Centre for High Energy Physics, Indian Institute of Science, Bangalore 560 012 (India); Caprini, Irinel [National Institute of Physics and Nuclear Engineering, POB MG 6, Bucharest, R-76900 (Romania)

2010-11-01T23:59:59.000Z

448

New Precision Limit on the Strange Vector Form Factors of the Proton  

E-Print Network (OSTI)

The parity-violating cross-section asymmetry in the elastic scattering of polarized electrons from unpolarized protons has been measured at a four-momentum transfer squared Q2 = 0.624 GeV and beam energy E =3.48 GeV to be A_PV = -23.80 +/- 0.78 (stat) +/- 0.36 (syst) parts per million. This result is consistent with zero contribution of strange quarks to the combination of electric and magnetic form factors G_E^s + 0.517 G_M^s = 0.003 +/- 0.010 (stat) +/- 0.004 (syst) +/- 0.009 (ff), where the third error is due to the limits of precision on the electromagnetic form factors and radiative corrections. With this measurement, the world data on strange contributions to nucleon form factors are seen to be consistent with zero and not more than a few percent of the proton form factors.

HAPPEX collaboration; Z. Ahmed; K. Allada; K. A. Aniol; D. S. Armstrong; J. Arrington; P. Baturin; V. Bellini; J. Benesch; R. Beminiwattha; F. Benmokhtar; M. Canan; A. Camsonne; G. D. Cates; J. -P. Chen; E. Chudakov; E. Cisbani; M. M. Dalton; C. W. de Jager; R. De Leo; W. Deconinck; P. Decowski; X. Deng; A. Deur; C. Dutta; G. B. Franklin; M. Friend; S. Frullani; F. Garibaldi; A. Giusa; A. Glamazdin; S. Golge; K. Grimm; O. Hansen; D. W. Higinbotham; R. Holmes; T. Holmstrom; J. Huang; M. Huang; C. E. Hyde; C. M. Jen; G. Jin; D. Jones; H. Kang; P. King; S. Kowalski; K. S. Kumar; J. H. Lee; J. J. LeRose; N. Liyanage; E. Long; D. McNulty; D. Margaziotis; F. Meddi; D. G. Meekins; L. Mercado; Z. -E. Meziani; R. Michaels; C. Munoz-Camacho; M. Mihovilovic; N. Muangma; K. E. Myers; S. Nanda; A. Narayan; V. Nelyubin; Nuruzzaman; Y. Oh; K. Pan; D. Parno; K. D. Paschke; S. K. Phillips; X. Qian; Y. Qiang; B. Quinn; A. Rakhman; P. E. Reimer; K. Rider; S. Riordan; J. Roche; J. Rubin; G. Russo; K. Saenboonruang; A. Saha; B. Sawatzky; R. Silwal; S. Sirca; P. A. Souder; M. Sperduto; R. Subedi; R. Suleiman; V. Sulkosky; C. M. Sutera; W. A. Tobias; G. M. Urciuoli; B. Waidyawansa; D. Wang; J. Wexler; R. Wilson; B. Wojtsekhowski; X. Zhan; X. Yan; H. Yao; L. Ye; B. Zhao; X. Zheng

2011-07-05T23:59:59.000Z

449

New Precision Limit on the Strange Vector Form Factors of the Proton  

The parity-violating cross-section asymmetry in the elastic scattering of polarized electrons from unpolarized protons has been measured at a four-momentum transfer squared Q2 = 0.624 GeV2 and beam energy Eb = 3.48 GeV to be APV = -23.80 0.78 (stat) 0.36 (syst) parts per million. This result is consistent with zero contribution of strange quarks to the combination of electric and magnetic form factors GEs + 0.517 GMs = 0.003 0.010 (stat) 0.004 (syst) 0.009 (ff), where the third error is due to the limits of precision on the electromagnetic form factors and radiative corrections. With this measurement, the world data on strange contributions to nucleon form factors are seen to be consistent with zero and not more than a few percent of the proton form factors.

Ahmed, Z; Allada, K; Armstrong, D S; Arrington, J; Baturin, P; Bellini, V; Benesch, J; Beminiwattha, R; Benmokhtar, F; Canan, M; Camsonne, A; Cates, G D; Chen, J -P; Chudakov, E; Cisbani, E; Dalton, M M; de Jager, C W; De Leo, R; Deconinck, W; Decowski, P; Deng, X; Deur, A; Dutta, C; Franklin, G B; Friend, M; Frullani, S; Garibaldi, F; Giusa, A; Glamazdin, A; Golge, S; Grimm, K; Hansen, O; Higinbotham, D W; Holmes, R; Holmstrom, T; Huang, J; Huang, M; Hyde, C E; Jen, C M; Jin, G; Jones, D; Kang, H; King, P; Kowalski, S; Kumar, K S; Lee, J H; LeRose, J J; Liyanage, N; Long, E; McNulty, D; Margaziotis, D; Meddi, F; Meekins, D G; Mercado, L; Meziani, Z -E; Michaels, R; Munoz-Camacho, C; Mihovilovic, M; Muangma, N; Myers, K E; Nanda, S

2012-03-05T23:59:59.000Z

450

Part_3_Minority_Economic_Impact.pdf | Department of Energy  

Energy Savers (EERE)

Part3MinorityEconomicImpact.pdf Part3MinorityEconomicImpact.pdf Part3MinorityEconomicImpact.pdf More Documents & Publications Declaration Of Trust Founding Legislation...

451

Security Forms and Information | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Services » New Employee Orientation » Security Forms and Services » New Employee Orientation » Security Forms and Information Security Forms and Information Homeland Security Presidential Directive HSPD-12 established new policy for a common identification standard for Federal Employees and contractors. As of October 27, 2005, all new Federal employees assigned to the DOE Headquarters complex are required to present two identity source documents (i.e., U.S. Passport, driver's license, identification card with photograph issued by a Federal, state, or local government agency, etc.), have their fingerprints taken, and undergo a background investigation (the identity proofing process) prior to reporting for duty or being issued a DOE standard badge (identity or PIV badge). Most likely, your HR representative and/or administrative personnel have

452

FAQs for Survey Form EIA-182  

Gasoline and Diesel Fuel Update (EIA)

FAQs for Survey Form EIA-182 FAQs for Survey Form EIA-182 What is the purpose of this survey? Form EIA-182, "Domestic Crude Oil First Purchase Report" is designed to collect data on both the average cost and volume associated with the physical and financial transfer of domestic crude oil off the property on which it was produced. The monthly reported data represent the initial market value and volume of domestic crude oil production. What are the published domestic crude oil first purchase prices? The domestic crude oil first purchase price is associated with only those companies that purchase crude oil the moment the oil leaves the lease on which it was produced. Companies are asked to report the average cost per barrel and total volume purchased for requested crude streams purchased in

453

STUDENT INTERN RELOCATION BENEFIT REQUEST FORM  

NLE Websites -- All DOE Office Websites (Extended Search)

01-RBR (8-2013) 01-RBR (8-2013) UCI (When Completed) UCI (When Completed) STUDENT INTERN RELOCATION BENEFIT REQUEST FORM Instructions for New Hire, Re-hire or Year-round Intern returning to Sandia work site from remote location: Review eligibility criteria below. If you believe that you may be eligible to receive relocation benefits from Sandia, complete and sign this form, then return to the CA or NM Student Intern Programs office. ELIGIBILITY CRITERIA Name: Phone: Email: School/Academic Residence Address Permanent Address Address 1 Address 2 City State Zip Code Student Acknowledgement: I certify that the information stated on this form is correct and complete to best of my knowledge. I

454

APS Visitor Registration Form | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

APS Visitor Registration Form APS Visitor Registration Form To request access as a visitor who will not do hands-on work, please complete this form. For assistance, contact the APS User Office by phone at (630) 252-9090 or by email at apsuser@aps.anl.gov. Please request access directly by contacting the APS User Office by phone at (630) 252-9090 or by email at apsuser@aps.anl.gov. If you are concerned about sending your passport and visa information, leave those fields blank and fax a letter to (630) 252-9250. To Request APS Visitor Registration, please enter the following: * indicates required field First Name*: Middle Initial/Name*: Last Name*: Title: Organization*: Department: Address 1*: Address 2: City*: State*: Zip Code*: Country: Phone*: Fax: E-mail Address*: Gender*: Female

455

FAQs for Survey Form EIA-14  

Gasoline and Diesel Fuel Update (EIA)

Form EIA-14 Form EIA-14 What is the purpose of this survey? Form EIA-14, "Refiners' Monthly Cost Report" is designed to collect summary data regarding crude oil prices by Petroleum Administration for Defense Districts (PADDs). The data are used to provide the government and the public monthly prices on refiner acquisition cost of crude oil. How are my data used to publish Refiner Acquisition Cost of Crude Oil? Your data, total cost and total volume, is combined with the data of other respondents. The sum of the costs for data from all of the respondents is divided by the sum of the volumes to calculate the Refiner Acquisition Cost (RAC) of crude oil. The composite RAC is the average cost of both domestic and imported crude oil. Where can I find the published data?

456

Forms & Applications | Stanford Synchrotron Radiation Lightsource  

NLE Websites -- All DOE Office Websites (Extended Search)

Forms & Applications Forms & Applications Forms: Before You Arrive User Information Log in to the User Portal to Register or Update Contact Informatioin Proposals Submit Proposals via User Portal (including Rapid Access and Letters of Intent) Proposal Extension Requests X-ray/VUV/SMB Macromolecular Crystallography (MC) User Agreements Non-Proprietary User Agreement Proprietary Research User Agreement Beam Time & Support Requests Log in to User Portal to Submit Beam Time or User Support Requests Computer Account X-ray/VUV/SMB Macromolecular Crystallography Use of SLAC Information Resources (submit with account request) User Financial Account User Financial Account Gas & Cryogenics Liquid Helium & Standard/Specialty Shipping & Receiving Hazardous Materials Shipper Non-Hazardous Materials Shipper

457

FAQs for Survey Forms 805 and 815  

Gasoline and Diesel Fuel Update (EIA)

Forms 805 and 815 Forms 805 and 815 On the EIA-815 survey, what should be reported in the "Fuel Uses & Losses During Month" column? The fuel use and loss column should only be used to report losses caused by spills, fires, contamination, and volumes used as fuel at a terminal. Data reported in these cells and all cells on the EIA-815 survey should always be positive. Do not use the fuel uses and losses column to correct line imbalances due to rounding. Line imbalances due to heat or pressure related variations, gauging problems, accounting adjustments and rounding that are less than or equal to 5 thousand barrels are acceptable. Line imbalances larger than 5 thousand barrels should be investigated for possible errors. EIA-805 Survey form & instructions Contact: Robert Merriam,

458

FAQs for Survey Forms 809 and 819  

Gasoline and Diesel Fuel Update (EIA)

9 and 819 9 and 819 EIA-809 (Weekly Oxygenate Report) How do I submit the form? There are four ways to submit the EIA-809 form. Secure File Transfer: https://signon.eia.doe.gov/upload/noticeoog.jsp The Secure File Transfer System uses the secure hypertext transfer protocol (HTTPS), an industry standard method to send information over the web using secure, encrypted processes. Electronic Filing Option: The PC Electronic Data Reporting Option (PEDRO) is a Windows-based application that will enable you to enter data interactively, import data from your own database, validate your data online, and transmit the encrypted data electronically to EIA via the Internet or a dial-up modem. To receive this free software call (202) 586-9659. Email: oog.surveys@eia.gov Fax forms to: (202) 586-1076

459

Oligomer functionalized nanotubes and composites formed therewith  

DOE Patents (OSTI)

Disclosed herein is a sequential functionalization methodology for the covalent modification of nanotubes with between one and four repeat units of a polymer. Covalent attachment of oligomer units to the surface of nanotubes results in oligomer units forming an organic sheath around the nanotubes, polymer-functionalized-nanotubes (P-NTs). P-NTs possess chemical functionality identical to that of the functionalizing polymer, and thus provide nanoscale scaffolds which may be readily dispersed within a monomer solution and participate in the polymerization reaction to form a polymer-nanotube/polymer composite. Formation of polymer in the presence of P-NTs leads to a uniform dispersion of nanotubes within the polymer matrix, in contrast to aggregated masses of nanotubes in the case of pristine-NTs. The covalent attachment of oligomeric units to the surface of nanotubes represents the formation of a functional nanoscale building block which can be readily dispersed and integrated within the polymer to form a novel composite material.

Zettl, Alexander K; Sainsbury, Toby; Frechet, Jean M.J.

2014-03-18T23:59:59.000Z

460

The Form Factors of the Nucleons  

SciTech Connect

There has been much activity in the measurement of the elastic electromagnetic proton and neutron form factors in the last decade, and the quality of the data has been greatly improved by performing double-polarization experiments, in comparison with with pre-vious unpolarized cross section data. Here we will review the experimental data base in view of the new results for the proton and the neutron, obtained at MIT-Bates, JLab and MAMI. The rapid evolution of phenomenological models triggered by these high- precision experiments will be discussed. In particular, the possibility that the proton is non-spherical in its ground state, and that the transverse charge density are model in- dependently defined in the infinite momentum frame. Likewise, flavor decomposition of the nucleon form factors into dressed u and d quark form factors, may give information about the quark-diquark structure of the nucleon. The current proton radius "crisis" will also be discussed.

Perdrisat, Charles F. [William and Mary College, JLAB

2013-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "form 715-01 part" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Density of Spray-Formed Materials  

SciTech Connect

Spray Forming is an advanced materials processing technology that transforms molten metal into a near-net-shape solid by depositing atomized droplets onto a substrate. Depending on the application, the spray-formed material may be used in the as-deposited condition or it may undergo post-deposition processing. Regardless, the density of the as-deposited material is an important issue. Porosity is detrimental because it can significantly reduce strength, toughness, hardness and other properties. While it is not feasible to achieve fully-dense material in the as-deposited state, density greater than 99% of theoretical density is possible if the atomization and impact conditions are optimized. Thermal conditions at the deposit surface and droplet impact angle are key processing parameters that influence the density of the material. This paper examines the factors that contribute to porosity formation during spray forming and illustrates that very high as-deposited density is achieved by optimizing processing parameters.

Kevin M. McHugh; Volker Uhlenwinkel; Nils Ellendr

2008-06-01T23:59:59.000Z

462

Method of forming an HTS article  

DOE Patents (OSTI)

A method of forming a superconducting article includes providing a substrate tape, forming a superconducting layer overlying the substrate tape, and depositing a capping layer overlying the superconducting layer. The capping layer includes a noble metal and has a thickness not greater than about 1.0 micron. The method further includes electrodepositing a stabilizer layer overlying the capping layer using a solution that is non-reactive to the superconducting layer. The superconducting layer has an as-formed critical current I.sub.C(AF) and a post-stabilized critical current I.sub.C(PS). The I.sub.C(PS) is at least about 95% of the I.sub.C(AF).

Bhattacharya, Raghu N.; Zhang, Xun; Selvamanickam, Venkat

2014-08-19T23:59:59.000Z

463

The Alternative Form of Fermat's Equation  

E-Print Network (OSTI)

An alternative form of Fermats equation[1] is proposed. It represents a portion of the identity that includes three terms of Fermats original equation. This alternative form permits an elementary and compact proof of the first case of Fermats Theorem (FT) for a number of specific exponents. Proofs are given for exponents n equal to 3, 5, 7,11 and 13. All these cases have already been proven using the original Fermats equation, not to mention the fact that a complete proof of FT was given by A. Wiles [2]. In view of this, the results presented here carry a purely methodological interest. They illustrate the effectiveness and simplicity of the method,compared with the well-known classical approach. An alternative form of the equation permits use of the criterion of the incompatibility of its terms, avoiding the labor-intensive and sophisticated calculations associated with traditional approach.

Anatoly A. Grinberg

2014-09-25T23:59:59.000Z

464

Mixed low-level waste form evaluation  

SciTech Connect

A scoping level evaluation of polyethylene encapsulation and vitreous waste forms for safe storage of mixed low-level waste was performed. Maximum permissible radionuclide concentrations were estimated for 15 indicator radionuclides disposed of at the Hanford and Savannah River sites with respect to protection of the groundwater and inadvertent intruder pathways. Nominal performance improvements of polyethylene and glass waste forms relative to grout are reported. These improvements in maximum permissible radionuclide concentrations depend strongly on the radionuclide of concern and pathway. Recommendations for future research include improving the current understanding of the performance of polymer waste forms, particularly macroencapsulation. To provide context to these estimates, the concentrations of radionuclides in treated DOE waste should be compared with the results of this study to determine required performance.

Pohl, P.I.; Cheng, Wu-Ching; Wheeler, T.; Waters, R.D.

1997-03-01T23:59:59.000Z

465

In-Transit Natural Gas Form | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

In-Transit Natural Gas Form In-Transit Natural Gas Form Excel Version of In-Transit Natural Gas Form.xlsx PDF Version of In-Transit Natural Gas Form More Documents & Publications...

466

BNL Rideshare Registration Form Your Name: _______________________ Life No.: ________  

E-Print Network (OSTI)

: _______________ BNL ETC Signature: _____________________ Date: _______________ Return form to Jeff Williams

Homes, Christopher C.

467

TCEQ-CoreDataForm | Open Energy Information  

Open Energy Info (EERE)

TCEQ-CoreDataForm Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: TCEQ-CoreDataForm Abstract This is the core data form from the Texas Commission on...

468

High temperature methods for forming oxidizer fuel  

DOE Patents (OSTI)

A method of treating a formation fluid includes providing formation fluid from a subsurface in situ heat treatment process. The formation fluid is separated to produce a liquid stream and a first gas stream. The first gas stream includes carbon dioxide, hydrogen sulfide, hydrocarbons, hydrogen or mixtures thereof. Molecular oxygen is separated from air to form a molecular oxygen stream comprising molecular oxygen. The first gas stream is combined with the molecular oxygen stream to form a combined stream comprising molecular oxygen and the first gas stream. The combined stream is provided to one or more downhole burners.

Bravo, Jose Luis (Houston, TX)

2011-01-11T23:59:59.000Z

469

Revised October 2012 MERCURY CONTAINING EQUIPMENT REGISTRATION FORM  

E-Print Network (OSTI)

Sphygmomanometer U-Shaped Manometer Other (please specify): How to return this form: Please send this form

Jia, Songtao

470

Directory of energy data collection forms: Forms in use as of October 1994  

SciTech Connect

This 18th edition directory provides an overview of DOE`s energy information collection programs for decisionmakers in Government and industry; selected public use forms currently used as basic energy information gathering tools by DOE are covered. For each form, an abstract is included that describes the form`s uses, its respondents, and the data collected. Also shown are frequently requested items: energy sources and functions covered by the form, general categories of respondents, collection frequency, public laws and regulations, reporting requirement, name and phone number of the data collection manager, and the publications resulting from the data collection. Indexes, arranged according to energy source/function, publications, respondent categories, former EIA form number designations, and collection authorities, are provided.

Not Available

1994-12-15T23:59:59.000Z

471

Ex Parte Communication Memorandum re Computer and Battery Back...  

Energy Savers (EERE)

of the Department of Energy to discuss coverage of computers and backup batteries. Ex Parte Memo re Computers More Documents & Publications Ex Parte Communication...

472

Making Energy Efficiency Part of Corporate Culture | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Making Energy Efficiency Part of Corporate Culture Making Energy Efficiency Part of Corporate Culture This presentation discusses how Nissan Motor Company incorporated energy...

473

EECBG Success Story: Energy Efficiency Upgrades Part of Winning...  

Energy Savers (EERE)

EECBG Success Story: Energy Efficiency Upgrades Part of Winning Formula for Oregon School District EECBG Success Story: Energy Efficiency Upgrades Part of Winning Formula for...

474

AGA-12, Part 2 Performance Test Results | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

AGA-12, Part 2 Performance Test Results AGA-12, Part 2 Performance Test Results The Pacific Northwest National Laboratory (PNNL) was tasked to evaluate the performance of devices...

475

Ex parte communication of the California Energy Commission- Docket...  

Energy Savers (EERE)

parte communication of the California Energy Commission- Docket No. EERE-2008-BT-STD-0005 Ex parte communication of the California Energy Commission- Docket No....

476

ACQUISITION LETTER DEAR Part 933 | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

ACQUISITION LETTER DEAR Part 933 ACQUISITION LETTER DEAR Part 933 This AL establishes policy and provides guidance for the use of alternative dispute resolution techniques in...

477

American Gas Association Memorandum Summarizing Ex Parte Communication...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Association Memorandum Summarizing Ex Parte Communication American Gas Association Memorandum Summarizing Ex Parte Communication On October 9, 2014, a workshop was hosted by the...

478

Nano-structures Thermoelectric Materals - Part 2 | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Nano-structures Thermoelectric Materals - Part 2 Nano-structures Thermoelectric Materals - Part 2 2002 DEER Conference Presentation: RTI International 2002deervenkatasubramanian2...

479

Nano-structures Thermoelectric Materals - Part 1 | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Nano-structures Thermoelectric Materals - Part 1 Nano-structures Thermoelectric Materals - Part 1 2002 DEER Conference Presentation: RTI International 2002deervenkatasubramanian1...

480

Electronic forms solutions To support your business objectives  

E-Print Network (OSTI)

Electronic forms solutions To support your business objectives Easily integrate your offline forms are using electronic forms instead of paper, so that their existing forms are always in stock, easy to locate and have a consistent look and feel. IBM® Lotus® Forms software provides an open electronic forms

Note: This page contains sample records for the topic "form 715-01 part" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Southwestern Power Administration Categorical Exclusion Determination Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Associated Electric Cooperative, Inc. Substation Improvements Associated Electric Cooperative, Inc. Substation Improvements Program or Field Office: Southwestern Power Administration Location{s) (City/County/State): Springfield, Missouri, Greene County Proposed Action Description: Associated Electric Cooperative, Inc. proposes to install new underground conduit and cable in Southwestern Power Administrations' Springfield, Missouri electrical substation. Categorical ExciusionCs) Al'l'lied: 10 CFR 1021, Appendix B to Subpart D, Part B4.6- Additions and modifications to electric power transmission facilities within a previously disturbed or developed facility . For the complete DOE National Environmental Policy Act regulations regarding categorical exclusions, including the full text of each categorical exclusion, see Subpart D of 10 CFR Part 1021.

482

Southwestern Power Administration Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Associated Electric Cooperative, Inc. Substation Improvements Associated Electric Cooperative, Inc. Substation Improvements Program or Field Office: Southwestern Power Administration Location{s) (City/County/State): Springfield, Missouri, Greene County Proposed Action Description: Associated Electric Cooperative, Inc. proposes to install new underground conduit and cable in Southwestern Power Administrations' Springfield, Missouri electrical substation. Categorical ExciusionCs) Al'l'lied: 10 CFR 1021, Appendix B to Subpart D, Part B4.6- Additions and modifications to electric power transmission facilities within a previously disturbed or developed facility . For the complete DOE National Environmental Policy Act regulations regarding categorical exclusions, including the full text of each categorical exclusion, see Subpart D of 10 CFR Part 1021.

483

NVO-1229-105 Part I  

Office of Legacy Management (LM)

9-105 Part I 9-105 Part I jyl).($z- 1 EVALUATION OF THE PROJECT SHOAL SITE FALLON, NEVADA FOR DISPOSITION, INCLUDING IDENTIFICATION OF RESTRICTIONS -- D -----. April 1970 Contract AT(29.2j.1229 ". S. ATOMIC ENERGY COMMISSION NEVADA OPERATIONS OFFICE LAS VEGAS, NEVADA HYDROGEOLOGY #? ISOTOPES PALO ALTO LABORATORIES 4062 Fabian Street Palo Alto, California 94303 LEGAL NOTICE This report was prepared as an account of Government sponsored work. Neither the United States, nor the commission, nor any person acting on behalf of the Commission: A: Makes any warranty or representation, ex- pressed or implied, with respect to the accuracy, completeness, oi- usefulness of the information con- tained in this report, or that the use of any infor- mation, apparatus, method, OI process disclosed in

484

[Place at top of Part I]  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

inserting in the FOA template are in blue. inserting in the FOA template are in blue. [Place at top of Part I - FUNDING OPPORTUNITY DESCRIPTION] Projects under this FOA will be funded, in whole or in part, with funds appropriated by the American Recovery and Reinvestment Act of 2009, Pub. L. 111-5, (Recovery Act or Act). The Recovery Act's purposes are to stimulate the economy and to create and retain jobs. The Act gives preference to activities that can be started and completed expeditiously, including a goal of using at least 50 percent of the funds made available by it for activities that can be initiated not later than June 17, 2009. Accordingly, special consideration will be given to projects that promote and enhance the objectives of the Act, especially job creation, preservation and

485

Part 4: Special Circumstances | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4: Special Circumstances 4: Special Circumstances Part 4: Special Circumstances Question: What is the relationship between removal actions and compliance with NEPA? Answer: The Secretarial Policy Statement on the National Environmental Policy Act (June 1994) specifies that "DOE CERCLA documents will incorporate NEPA values, such as analysis of cumulative, off-site, ecological, and socioeconomic impacts, to the extent practicable." The Statement maintains that "DOE may choose, after consultation with stakeholders and as a matter of policy, to integrate the NEPA and CERCLA processes for specific proposed actions." NEPA requirements and DOE regulations for compliance with NEPA (10 CFR Part 1021), must be satisfied, as applicable, consistent with the Secretarial Policy Statement. In most

486

DOE Meeting Memorandum: Ex Parte Communications  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Meeting Memorandum: Ex Parte Communications Meeting Memorandum: Ex Parte Communications Date: June 4, 2013 DOE Attendees: Ashley Armstrong, Lucy DeButts, and John Cymbalsky, EERE Building Technologies Program; Eric Haas, General Counsel Outside attendees: Patrick Keal, Big Ass Fans; Janie Wise, Vern Simmons, & Terry Paul, Cassidy & Associates Meeting Contact: Janie Wise - jwise@cassidy.com / 202-585-2553 Subject: Pending rulemakings on (1) Commercial and industrial fans and (2) Residential fans and lighting kits. Summary: Big Ass Fans is headquartered in Lexington, Kentucky, and designs and manufactures a variety of fan models for commercial, industrial and residential use. BAF met with DOE to discuss the ongoing rulemaking process for the commercial and industrial fans and blowers energy conservation

487

On Ethics Form #1: There are two sections on this form where the vendor/contractor can list any campaign  

E-Print Network (OSTI)

On Ethics Form #1: There are two sections on this form where the vendor/contractor can list any. On Ethics Form #5: This form seems to confuse many departments, but if you read the instructions carefully

Alpay, S. Pamir

488

New Species of Cyanobacteria Forms Intracellular Carbonates  

NLE Websites -- All DOE Office Websites (Extended Search)

New Species of Cyanobacteria New Species of Cyanobacteria Forms Intracellular Carbonates New Species of Cyanobacteria Forms Intracellular Carbonates Print Wednesday, 30 January 2013 00:00 A new species of cyanobacteria-photosynthetic bacteria that occupy a wide array of habitats-was discovered in the Mexican Lake of Alchichica where massive carbonate rocks form. Cyanobacteria have been impacting the global carbon cycle of the Earth for more than 2.3 billion years by assimilating CO2 into organic compounds and triggering calcium carbonate (CaCO3) precipitation. Despite the importance of this cyanobacteria-mediated CaCO3 biomineralization, the mechanistic details of this process are still poorly understood. Scientists agree that calcification in cyanobacteria is an extracellular process: Photosynthesizing cells commonly export the photosynthesis byproduct CO32- outside their cells where it bonds with an alkaline earth metal like Ca2+. The cyanobacteria recently found in Lake Alchichica, however, forms amorphous Ca-, Mg-, Sr- and Ba-rich carbonates intracellularly. This discovery significantly modifies the traditional view of how bacteria induce CaCO3 precipitation and may improve understanding of the fossil record by hinting at ancient traces of life in rocks, or designing new routes for sequestering CO2 or 90Sr in minerals.

489

New Species of Cyanobacteria Forms Intracellular Carbonates  

NLE Websites -- All DOE Office Websites (Extended Search)

New Species of Cyanobacteria Forms Intracellular Carbonates Print New Species of Cyanobacteria Forms Intracellular Carbonates Print A new species of cyanobacteria-photosynthetic bacteria that occupy a wide array of habitats-was discovered in the Mexican Lake of Alchichica where massive carbonate rocks form. Cyanobacteria have been impacting the global carbon cycle of the Earth for more than 2.3 billion years by assimilating CO2 into organic compounds and triggering calcium carbonate (CaCO3) precipitation. Despite the importance of this cyanobacteria-mediated CaCO3 biomineralization, the mechanistic details of this process are still poorly understood. Scientists agree that calcification in cyanobacteria is an extracellular process: Photosynthesizing cells commonly export the photosynthesis byproduct CO32- outside their cells where it bonds with an alkaline earth metal like Ca2+. The cyanobacteria recently found in Lake Alchichica, however, forms amorphous Ca-, Mg-, Sr- and Ba-rich carbonates intracellularly. This discovery significantly modifies the traditional view of how bacteria induce CaCO3 precipitation and may improve understanding of the fossil record by hinting at ancient traces of life in rocks, or designing new routes for sequestering CO2 or 90Sr in minerals.

490

New Species of Cyanobacteria Forms Intracellular Carbonates  

NLE Websites -- All DOE Office Websites (Extended Search)

New Species of Cyanobacteria Forms Intracellular Carbonates Print New Species of Cyanobacteria Forms Intracellular Carbonates Print A new species of cyanobacteria-photosynthetic bacteria that occupy a wide array of habitats-was discovered in the Mexican Lake of Alchichica where massive carbonate rocks form. Cyanobacteria have been impacting the global carbon cycle of the Earth for more than 2.3 billion years by assimilating CO2 into organic compounds and triggering calcium carbonate (CaCO3) precipitation. Despite the importance of this cyanobacteria-mediated CaCO3 biomineralization, the mechanistic details of this process are still poorly understood. Scientists agree that calcification in cyanobacteria is an extracellular process: Photosynthesizing cells commonly export the photosynthesis byproduct CO32- outside their cells where it bonds with an alkaline earth metal like Ca2+. The cyanobacteria recently found in Lake Alchichica, however, forms amorphous Ca-, Mg-, Sr- and Ba-rich carbonates intracellularly. This discovery significantly modifies the traditional view of how bacteria induce CaCO3 precipitation and may improve understanding of the fossil record by hinting at ancient traces of life in rocks, or designing new routes for sequestering CO2 or 90Sr in minerals.

491

BRAZIL VISITING FELLOWSHIP SCHEME Application Form  

E-Print Network (OSTI)

BRAZIL VISITING FELLOWSHIP SCHEME Application Form APPLICATIONS SHOULD BE TYPEWRITTEN AND BOXES of attendance Qualifications awarded and class of Honours, etc. Principal Subject(s) taken #12;BRAZIL VISITING): Date(s) From To To Nature of work and Position held Name and address of employer #12;BRAZIL VISITING

Birmingham, University of

492

Laser Worker Registration Form (LWRF) Surname: Forenames  

E-Print Network (OSTI)

ABCDEFGHI Laser Worker Registration Form (LWRF) Surname: Forenames: School of: Ext No.: Email YY Class of Laser to be Used 1 1M 1E 2 2M 3R 3B 4 Work Location(s) Lab No. Laser Work Currently Undertaken Elsewhere Are you currently engaged in work elsewhere involving laser radiation? YES

Martin, Ralph R.

493

ELECTRONIC BILLING EXEMPTION APPEAL Return this form  

E-Print Network (OSTI)

ELECTRONIC BILLING EXEMPTION APPEAL Return this form In person on campus: 333 Science Teaching or black ink. DIRECTIONS To be considered for an exemption from an electronic billing, which is mandatory to be exempt from electronic billing. If you circumstances are similar to the following examples, you may

Amin, S. Massoud

494

American Studies Graduate Program Advisor Form  

E-Print Network (OSTI)

American Studies Graduate Program Advisor Form Thank you for your interest in the American Studies must first secure an advisor in order to be considered for admission. The first-year advisor can, American Studies is not in a position to assign faculty to serve as advisors. It is, therefore

Dyer, Bill

495

Poster Request Form Classroom Technology Services, ICIT  

E-Print Network (OSTI)

1 Poster Request Form Classroom Technology Services, ICIT Room Number: 333 Hunter North, Phone: 212-772-4943, Fax: 212-772-5626 Email: av_res@hunter.cuny.edu Poster requests must be submitted three (3) days: _________________________________________________ Phone Number: ________________________________________________ Number of Posters Needed

Qiu, Weigang

496

Form drag at Three Tree Point  

E-Print Network (OSTI)

form drag with bottom pressure sensors #12;Oscillatory dynamics tidal energy converted to internal waves, eddies and mixing no tidally averaged work done on system slack tide: background tilt flood & ebb Puget Sound, WA Point Three Tree Pressure sensors (PPODs) at Three Tree Point (TTP) PPODs #12;PPOD

Warner, Sally

497

Free-Form Motion Processing Scott Kircher  

E-Print Network (OSTI)

Free-Form Motion Processing Scott Kircher University of Illinois at Urbana-Champaign and Michael Descriptors: I.3.7 [Computer Graphics]: Three-Dimensional Graphics and Realism--Animation General Terms are typical of several common motion sources, including physical simulations of non-rigid objects (e.g., cloth

Garland, Michael

498

Asset Management Equipment Disposal Form -Refrigerant Recovery  

E-Print Network (OSTI)

enters the waste stream with the charge intact (e.g., motor vehicle air conditioners, refrigeratorsAsset Management Equipment Disposal Form - Refrigerant Recovery Safe Disposal Requirements Under refrigeration, cold storage warehouse refrigeration, chillers, and industrial process refrigeration) has to have

Sin, Peter

499

Hypersonic Molecular Shocks in Star Forming Regions  

E-Print Network (OSTI)

Much emission from star forming regions is from shock-excited gas. Shocks in molecular clouds are still not fully understood, as magnetic fields, dust and chemistry all play significant roles. I review the history, physics and current work in understanding these shocks, and in their possible use as diagnostics of local conditions.

Brand, P W J L

2006-01-01T23:59:59.000Z

500

Hypersonic Molecular Shocks in Star Forming Regions  

E-Print Network (OSTI)

Much emission from star forming regions is from shock-excited gas. Shocks in molecular clouds are still not fully understood, as magnetic fields, dust and chemistry all play significant roles. I review the history, physics and current work in understanding these shocks, and in their possible use as diagnostics of local conditions.

Peter W. J. L. Brand

2006-09-08T23:59:59.000Z