National Library of Energy BETA

Sample records for ford motor company

  1. The Ford Motor Company Engineering Design Center opened

    E-Print Network [OSTI]

    Espinosa, Horacio D.

    The Ford Motor Company Engineering Design Center opened fall 2005 The atrium in the new Ford Motor of electrical engineering and computer science, won a Department of Energy Early Career Award. Dudley Childress. He also received an IBM Faculty Award. Mark Daskin, professor of industrial engineering

  2. Final Report of a CRADA Between Pacific Northwest National Laboratory and the Ford Motor Company (CRADA No. PNNL/265): “Deactivation Mechanisms of Base Metal/Zeolite Urea Selective Catalytic Reduction Materials, and Development of Zeolite-Based Hydrocarbon Adsorber Materials”

    SciTech Connect (OSTI)

    Gao, Feng; Kwak, Ja Hun; Lee, Jong H.; Tran, Diana N.; Peden, Charles HF; Howden, Ken; Cheng, Yisun; Lupescu, Jason; Cavattaio, Giovanni; Lambert, Christine; McCabe, Robert W.

    2013-02-14

    Reducing NOx emissions and particulate matter (PM) are primary concerns for diesel vehicles required to meet current LEV II and future LEV III emission standards which require 90+% NOx conversion. Currently, urea SCR as the NOx reductant and a Catalyzed Diesel Particulate Filter (CDPF) are being used for emission control system components by Ford Motor Company for 2010 and beyond diesel vehicles. Because the use of this technology for vehicle applications is new, the relative lack of experience makes it especially challenging to satisfy durability requirements. Of particular concern is being able to realistically simulate actual field aging of the catalyst systems under laboratory conditions. This is necessary both as a rapid assessment tool for verifying improved performance and certifiability of new catalyst formulations, and to develop a good understanding of deactivation mechanisms that can be used to develop improved catalyst materials. In addition to NOx and PM, the hydrocarbon (HC) emission standards are expected to become much more stringent during the next few years. Meanwhile, the engine-out HC emissions are expected to increase and/or be more difficult to remove. Since HC can be removed only when the catalyst becomes warm enough for its oxidation, three-way catalyst (TWC) and diesel oxidation catalyst (DOC) formulations often contain proprietary zeolite materials to hold the HC produced during the cold start period until the catalyst reaches its operating temperature (e.g., >200°C). Unfortunately, much of trapped HC tends to be released before the catalyst reaches the operating temperature. Among materials effective for trapping HC during the catalyst warm-up period, siliceous zeolites are commonly used because of their high surface area and high stability under typical operating conditions. However, there has been little research on the physical properties of these materials related to the adsorption and release of various hydrocarbon species found in the engine exhaust. For these reasons, automakers and engine manufacturers have difficulty improving their catalytic converters for meeting the stringent HC emission standards. In this collaborative program, scientists and engineers in the Institute for Integrated Catalysis at Pacific Northwest National Laboratory and at Ford Motor Company have investigated laboratory- and engine-aged SCR catalysts, containing mainly base metal zeolites. These studies are leading to a better understanding of various aging factors that impact the long-term performance of SCR catalysts and improve the correlation between laboratory and engine aging, saving experimental time and cost. We have also studied materials effective for the temporary storage of HC species during the cold-start period. In particular, we have examined the adsorption and desorption of various HC species produced during the combustion with different fuels (e.g., gasoline, E85, diesel) over potential HC adsorber materials, and measured the kinetic parameters to update Ford’s HC adsorption model. Since this CRADA has now been completed, in this final report we will provide brief summaries of most of the work carried out on this CRADA over the last several years.

  3. Ford Debuts Solar Energy Concept Car

    Broader source: Energy.gov [DOE]

    The Ford Motor Company unveiled the C-MAX Solar Energi Concept, a sun-powered vehicle with the potential to deliver what a plug-in hybrid offers without depending on the electric grid for fuel.

  4. Ford`s 1996 Crown Victoria dedicated natural gas vehicle

    SciTech Connect (OSTI)

    Lapetz, J.; Fulton, B.; LeRoux, M.; Locke, J.; Peters, E.; Roman, L.; Walsh, R. [Ford Motor Co., Dearborn, MI (United States); Beitler, J.; Wolff, W.

    1995-12-31

    Ford Motor Company has introduced a Crown Victoria dedicated natural gas vehicle (NGV) to meet rising demand for vehicles powered by cleaner burning fuels and to reduce dependency on foreign energy imports. The Crown Victoria NGS is a production vehicle maintaining Original Equipment Manufacturer (OEM) quality and warranty while complying with all applicable corporate, federal and state requirements.

  5. Honda motor company's CVCC engine

    SciTech Connect (OSTI)

    Abernathy, W.J.; Ronan, L.

    1980-07-01

    Honda Motor Company of Japan in a four-year period from 1968 to 1872 designed, tested, and mass-produced a stratified charge engine, the CVCC, which in comparison to conventional engines of similar output at the time was lower in CO, HC and NO/sub x/ emissions and higher in fuel economy. Honda developed the CVCC engine without government assistance or outside help. Honda's success came at a time when steadily increasing fuel costs and the various provisions of the Clean Air Act had forced US automakers to consider possible alternatives to the conventional gasoline engine. While most major engine manufacturers had investigated some form of stratified charge engine, Honda's CVCC was the only one to find successful market application. This case study examines the circumstances surrounding the development of the CVCC engine and its introduction into the Japanese and American markets.

  6. Workplace Charging Challenge Partner: Ford Motor Company | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematics And Statistics » USAJobs SearchAMERICA'SEnergy SafelyEnergy

  7. Ford-Dow Partnership Is Linked to Carbon Fiber Research at ORNL...

    Office of Environmental Management (EM)

    Carbon Fiber Research at ORNL May 16, 2013 - 12:00am Addthis EERE provided funding to Dow Chemical, Ford Motor Company, and ORNL to demonstrate a novel polymer fiber material and...

  8. Ford`s 1996 Crown Victoria dedicated natural gas vehicle. Final report, January 1991-December 1995

    SciTech Connect (OSTI)

    Dierker, J.B.; Dondlinger, K.A.

    1996-09-01

    Ford Motor Company has introduced a Crown Victoria dedicated natural gas vehicle (NGV) to meet rising demand for vehicles powered by cleaner buring fuels and to reduce dependency on foreign energy imports. The Crown Victoria NGV is a production vehicle that maintains Original Equipment Manufacturer (OEM) quality and warranty while complying with all applicable corporate, federal and state requirements.

  9. VEE-0033- In the Matter of Nugent Motor Company

    Broader source: Energy.gov [DOE]

    On October 16, 1996, Nugent Motor company (Nugent) of Colebrook, New Hampshire, filed an Application for Exception with the Office of Hearings and Appeals of the Department of Energy. In its...

  10. Bridging Aero and Auto CPS: Secure Software and Data Distribution* Krishna Sampigethaya, Walter Beck, Kristy Lane, Scott Lintelman (The Boeing Company),

    E-Print Network [OSTI]

    Rajkumar, Ragunathan "Raj"

    Bridging Aero and Auto CPS: Secure Software and Data Distribution* Krishna Sampigethaya, Walter are those of the authors, and should not be interpreted as the views of The Boeing Company and Ford Motor

  11. FORD | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergy A plug-inPPLfor InnovativeProcessing22,673,list7.pdfFORD FORD FORD FORD FORD FORD

  12. Overview of Fords Thermoelectric Programs: Waste Heat Recovery...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fords Thermoelectric Programs: Waste Heat Recovery and Climate Control Overview of Fords Thermoelectric Programs: Waste Heat Recovery and Climate Control Overview of progress...

  13. Integration of Rooftop Photovoltaic Systems in St. Paul Ford Site's Redevelopment Plans

    SciTech Connect (OSTI)

    Olis, D.; Mosey, G.

    2015-03-01

    The purpose of this analysis is to estimate how much electricity the redeveloped Ford Motor Company assembly plant site in St. Paul, Minnesota, might consume under different development scenarios and how much rooftop photovoltaic (PV) generation might be possible at the site. Because the current development scenarios are high-level, preliminary sketches that describe mixes of residential, retail, commercial, and industrial spaces, electricity consumption and available rooftop area for PV under each scenario can only be grossly estimated. These results are only indicative and should be used for estimating purposes only and to help inform development goals and requirements moving forward.

  14. U.S. Department of Energy Issues Rules for Auto Loan Program...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5.9 Billion Loan for Ford Motor Company Obama Administration Awards First Three Auto Loans for Advanced Technologies to Ford Motor Company, Nissan Motors and Tesla Motors...

  15. Ford | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoopButtePowerEdistoWhiskeyFootprint Ventures Jump to: navigation, searchForbesFord

  16. GM-Ford-Chrysler: Allocating Loan Authority

    Broader source: Energy.gov [DOE]

    Statement from GM, Ford, and Chrysler: "Allocating the $25 Billion in Direct Loan Authority to Loan Applicants"

  17. Motors

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass map shines light on77 PAGEMissionStress NewradicalEnergy,US DeptMotor FuelMotors

  18. GM-Ford-Chrysler: IFR Consolidated Application Feature | Department...

    Office of Environmental Management (EM)

    Consolidated Application Feature GM-Ford-Chrysler: IFR Consolidated Application Feature IFR Consolidated Application Feature GM-Ford-Chrysler: IFR Consolidated Application Feature...

  19. GM-Ford-Chrysler: ATV Proposed Product Costs | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ATV Proposed Product Costs GM-Ford-Chrysler: ATV Proposed Product Costs "Proposed Product Cost for Advanced Technology Vehicles" GM-Ford-Chrysler: ATV Proposed Product Costs More...

  20. GM-Ford-Chrysler: Issues Related to Vehicle Eligibility | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Issues Related to Vehicle Eligibility GM-Ford-Chrysler: Issues Related to Vehicle Eligibility GM-Ford-Chrysler: Issues Related to Vehicle Eligibility More Documents & Publications...

  1. GM-Ford-Chrysler: IFR Implementation | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Implementation GM-Ford-Chrysler: IFR Implementation "Essential Requirements: Interim Final Rule for Section 136 Implementation" GM-Ford-Chrysler: IFR Implementation More Documents...

  2. in this issue 1 Lessons from Ford of Mexico

    E-Print Network [OSTI]

    Gabrieli, John

    in this issue 1 Lessons from Ford of Mexico 2 Welcome 3 The SDM Core: System Architecture 4 SDM 12 Calendar SDM partnership is a success story for Ford of Mexico Ford of Mexico started its-changing industry needs. When Ford of Mexico began looking for an advanced degree program to develop high

  3. U.S. Department of Energy Announces Expanded Partnership with...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    research company for Chrysler Group LLC, Ford Motor Company, and General Motors) and Tesla Motors Energy industry - BP America, Chevron Corporation, ConocoPhillips, ExxonMobil...

  4. Josephine Ford Cancer Center Cancer Research Programs

    E-Print Network [OSTI]

    Finley Jr., Russell L.

    Josephine Ford Cancer Center Cancer Research Programs presented to WSU SOM PAD January 10, 2012 presented by Sandra A. Rempel, Ph.D. Associate Director of Research, JFCC #12;JFCC Cancer Research Programs Cancer Epidemiology, Prevention and Control Program Members: Gwen Alexander, Andrea Cassidy

  5. Maximizing Power Output in Homogeneous Charge Compression Ignition (HCCI) Engines and Enabling Effective Control of Combustion Timing

    E-Print Network [OSTI]

    Saxena, Samveg

    2011-01-01

    Ford Motor Company, “Diesel Engine Aftertreatment: How FordNational Laboratory, “Engine Combustion Network”, http://High Power Output without Engine Knock and with Ultra-Low

  6. Implementing Motor Management 

    E-Print Network [OSTI]

    Colip, R. L.

    2002-01-01

    PRESIDENT-SALES, BALDOR ELECTRlC COMPANY, FORT SMITH, ARKANSAS IMPLEMENTING MOTOR MANAGEMENT ABSTRACT Electric motors account for sixty five percent of industrial energy consumed today. There are many opportunities to conserve electricity by using more...

  7. Ford Motor Co Sustainable Technologies and Hybrid Programme | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LISTStar2-0057-EA Jump to:ofEnia SpAFlex Fuels Energy JumpVyncke Jump to:

  8. FY2014 Oak Ridge National Laboratory Annual Progress Report for the Power Electronics and Electric Motors Program

    SciTech Connect (OSTI)

    Ozpineci, Burak

    2014-11-01

    The US Department of Energy (DOE) announced in May 2011 a new cooperative research effort comprising DOE, the US Council for Automotive Research (composed of automakers Ford Motor Company, General Motors Company, and Chrysler Group), Tesla Motors, and representatives of the electric utility and petroleum industries. Known as U.S. DRIVE (Driving Research and Innovation for Vehicle efficiency and Energy sustainability), it represents DOE’s commitment to developing public–private partnerships to fund high-risk–high-reward research into advanced automotive technologies. The new partnership replaces and builds upon the partnership known as FreedomCAR (derived from “Freedom” and “Cooperative Automotive Research”) that ran from 2002 through 2010 and the Partnership for a New Generation of Vehicles initiative that ran from 1993 through 2001. Oak Ridge National Laboratory’s (ORNL’s) Advanced Power Electronics and Electric Motors (APEEM) subprogram within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies now under development. Research is focused on developing revolutionary new power electronics (PE), electric motor, and traction drive system (TDS) technologies that will leapfrog current on-the-road technologies, leading to lower cost and better efficiency in transforming battery energy to useful work. The research and development (R&D) is also aimed at achieving a greater understanding of and improvements in the way the various new components of tomorrow’s automobiles will function as a unified system to improve fuel efficiency through research in more efficient TDSs.

  9. President Ford Signs the Energy Reorganization Act of 1974 |...

    National Nuclear Security Administration (NNSA)

    Ford Signs the Energy Reorganization Act of 1974 | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing...

  10. AVTA: 2013 Ford C-MAX HEV Testing Results

    Broader source: Energy.gov [DOE]

    VTO's National Laboratories have tested and collected both dynamometer and fleet data for the Ford C-MAX HEV (a hybrid electric vehicle).

  11. J. Liu et al. (Eds.): IEEE WCCI 2012, LNCS 7311, pp. 98121, 2012. Springer-Verlag Berlin Heidelberg 2012

    E-Print Network [OSTI]

    Michalewicz, Zbigniew

    for very large companies (e.g. Ford, General Motors, BMA Coal, Orlando Wines, Bank of America, BHP Billiton

  12. The Woodrow Wilson School of Public and International Affairs Princeton University

    E-Print Network [OSTI]

    Mauzerall, Denise

    from British Petroleum and Ford Motor Company, continues its work on carbon capture and storage as well

  13. The Woodrow Wilson School of Public and International Affairs Princeton University

    E-Print Network [OSTI]

    Mauzerall, Denise

    Initiative, the result of a $20 million grant from British Petroleum and Ford Motor Company, continues its

  14. Deactivation Mechanisms of Base Metal/Zeolite Urea Selective...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Pacific Northwest National Laboratory Yisun Cheng, John Hoard, * and Christine Lambert Ford Motor Company * Current address: Department of Mechanical Engineering,...

  15. AVTA: 2010 Ford Fusion HEV Testing Results

    Broader source: Energy.gov [DOE]

    The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a wide range of advanced vehicles and technologies on dynamometers, closed test tracks, and on-the-road. These results provide benchmark data that researchers can use to develop technology models and guide future research and development. The following reports describe results of testing done on a 2010 Ford Fusion hybrid-electric vehicle. Baseline data, which provides a point of comparison for the other test results, was collected at two different research laboratories. Baseline and other data collected at Idaho National Laboratory is in the attached documents. Baseline and battery testing data collected at Argonne National Laboratory is available in summary and CSV form on the Argonne Downloadable Dynometer Database site (http://www.anl.gov/energy-systems/group/downloadable-dynamometer-databas...). Taken together, these reports give an overall view of how this vehicle functions under extensive testing.

  16. Directions to East Hall: I-94 (Ford Freeway)

    E-Print Network [OSTI]

    Jonides, John

    Directions to East Hall: I-94 (Ford Freeway) From Detroit and the Detroit Metropolitan on your right. I-96 (also called the Jeffries Freeway) From Parts of Detroit, Redford, M-14, Plymouth

  17. Final Report of a CRADA Between Pacific Northwest National Laboratory and the General Motors Company (CRADA No. PNNL/271): “Degradation Mechanisms of Urea Selective Catalytic Reduction Technology”

    SciTech Connect (OSTI)

    Kim, Do Heui; Lee, Jong H.; Peden, Charles HF; Howden, Ken; Kim, Chang H.; Oh, Se H.; Schmieg, Steven J.; Wiebenga, Michelle H.

    2011-12-13

    Diesel engines can offer substantially higher fuel efficiency, good driving performance characteristics, and reduced carbon dioxide (CO2) emission compared to stoichiometric gasoline engines. Despite the increasing public demand for higher fuel economy and reduced dependency on imported oil, however, meeting the stringent emission standards with affordable methods has been a major challenge for the wide application of these fuel-efficient engines in the US market. The selective catalytic reduction of NOx by urea (urea-SCR) is one of the most promising technologies for NOx emission control for diesel engine exhausts. To ensure successful NOx emission control in the urea-SCR technology, both a diesel oxidation catalyst (DOC) and a urea-SCR catalyst with high activity and durability are critical for the emission control system. Because the use of this technology for light-duty diesel vehicle applications is new, the relative lack of experience makes it especially challenging to satisfy the durability requirements. Of particular concern is being able to realistically simulate actual field aging of the catalyst systems under laboratory conditions, which is necessary both as a rapid assessment tool for verifying improved performance and certifiability of new catalyst formulations. In addition, it is imperative to develop a good understanding of deactivation mechanisms to help develop improved catalyst materials. In this CRADA program, General Motors Company and PNNL have investigated fresh, laboratory- and vehicle-aged DOC and SCR catalysts. The studies have led to a better understanding of various aging factors that impact the long-term performance of catalysts used in the urea-SCR technology, and have improved the correlation between laboratory and vehicle aging for reduced development time and cost. This Final Report briefly highlights many of the technical accomplishments and documents the productivity of the program in terms of peer-reviewed scientific publications (2 total), reports (3 total including this Final Report), and presentations (5 total).

  18. Fords, New Jersey: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View New PagesSustainable Urban Transport JumpFlowood,Pevafersa JV Jump to:BioFordFords, New

  19. Production Forecast, Analysis and Simulation of Eagle Ford Shale Oil 

    E-Print Network [OSTI]

    Alotaibi, Basel Z S Z J

    2014-12-02

    is to generate field-wide production forecast of the Eagle Ford Shale (EFS). This study considered oil production of the EFS only. More than 6 thousand oil wells were put online in the EFS basin between 2008 and December 2013. The method started by generating...

  20. MEXICO CITY Adam Miller, Brenna Ford, Kait Sakey

    E-Print Network [OSTI]

    Nagurney, Anna

    MEXICO CITY CONGESTION Adam Miller, Brenna Ford, Kait Sakey #12;Introduction · Mexico City. · Including private operators(which carry about 60% of the traffic) the Mexico City passenger transport system handles about twice the passengers of the New York MTA. #12;IBM Commuter Pain Index #12;#12;Mexico City

  1. Ford Cleveland: Inside-Out Analysis Identifies Energy and Cost Savings Opportunities at Metal Casting Plant; Industrial Technologies Program Metal Casting BestPractices Plant-Wide Assessment Case Study

    SciTech Connect (OSTI)

    Not Available

    2003-09-01

    The Ford Cleveland Casting Plant used results from its plant-wide energy efficiency assessment to identify 16 energy- and cost-saving projects. These projects addressed combustion, compressed air, water, steam, motor drive, and lighting systems. When implemented, the projects should save a total of$3.28 million per year. In addition, two long-term projects were identified that together would represent another$9.5 million in cost savings.

  2. AVTA: 2013 Ford C-Max Energi Fleet PHEV Testing Results

    Broader source: Energy.gov [DOE]

    VTO's National Laboratories have tested and collected both dynamometer and fleet data for the Ford CMAX Energi (a plug-in hybrid electric vehicle).

  3. Application Guidelines for Energy Efficient Motors 

    E-Print Network [OSTI]

    Cowern, E. H.

    1983-01-01

    GUIDELINES FOR ENERGY EFFICIENT MOTORS" Edward H. Cowern, P. E. Baldor Electric Company Hallingford, CT Abstract - Rapidly rlslng power costs have promp ted industrial motor users to consider specifying motors having efficiencies higher than the norm... and marketing posi tions. He is currently the New England District Manager for Baldor Electric Company and pre~ident of EMS, Inc. 480 ESL-IE-83-04-73 Proceedings from the Fifth Industrial Energy Technology Conference Volume II, Houston, TX, April 17...

  4. Achieving A Long Term Business Impact by Improving the Energy Effectiveness and Reliability of Electric Motors 

    E-Print Network [OSTI]

    Whelan, C. D.

    1997-01-01

    Over 100,000 electric motors drive the production equipment throughout a large chemical company. The energy-efficiency and reliability of these motors during their entire life have a decided impact on the company's manufacturing costs and production...

  5. Ford County, Illinois: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View New PagesSustainable Urban Transport JumpFlowood,Pevafersa JV Jump to:BioFord County,

  6. Ford County, Kansas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View New PagesSustainable Urban Transport JumpFlowood,Pevafersa JV Jump to:BioFord County,Kansas:

  7. Ford Heights, Illinois: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View New PagesSustainable Urban Transport JumpFlowood,Pevafersa JV Jump to:BioFord

  8. Co-Optimization of Fuels and Vehicles

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Optimization of Fuels and Vehicles Jim Anderson, Ford Motor Company Bioenergy 2015 June 24, 2015 Sustainable Personal Transportation Materials, Manufacturing, End-of-Life Use Less...

  9. Dynamometer Evaluation of Plasma-Catalyst for Diesel NOx Reduction...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Evaluation of Plasma-Catalyst for Diesel NOx Reduction Dynamometer Evaluation of Plasma-Catalyst for Diesel NOx Reduction 2003 DEER Conference Presentation: Ford Motor Company...

  10. 2013 Annual Merit Review Results Report - Cross-Reference of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Renewable Energy Laboratory. Atomic Layer Deposition for Stabilization of Amorphous Silicon Anodes (Energy Storage) 4-99 Clay Maranville; Ford Motor Company. Thermoelectric...

  11. Advance Patent Waiver W(A)2010-017

    Broader source: Energy.gov [DOE]

    This is a request by FORD MOTOR COMPANY for a DOE waiver of domestic and foreign patent rights under agreement DE-FG36-08GO18128

  12. AVTA: Ford Escape PHEV Advanced Research Vehicle 2010 Testing Results

    Broader source: Energy.gov [DOE]

    The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a wide range of advanced vehicles and technologies on dynamometers, closed test tracks, and on-the-road. These results provide benchmark data that researchers can use to develop technology models and guide future research and development. The following reports describe results of testing done on a plug-in hybrid electric Ford Escape Advanced Research Vehicle, an experimental model not currently for sale. The baseline performance testing provides a point of comparison for the other test results. Taken together, these reports give an overall view of how this vehicle functions under extensive testing. This research was conducted by Idaho National Laboratory.

  13. Fuel-tolerance tests with the Ford PROCO engine

    SciTech Connect (OSTI)

    Choma, M.A.; Havstad, P.H.; Simko, A.O.; Stockhausen, W.F.

    1981-01-01

    A variety of fuel tolerance tests were conducted utilizing Ford's PROCO engine, a direct fuel injection stratified charge engine developed for light duty vehicles. These engine tests were run on the dynamometer and in vehicles. Data indicate an 89 RON octane requirement, relatively low sensitivity to volatility characteristics and good fuel economy, emission control and operability on a certain range of petroleum fuel and alcohol mixes including 100% methanol. Fuels such as JP-4 and Diesel fuel are not at present suitable for this engine. There were no engine modifications tested that might improve the match between the engine and a particular fuel. The 100% methanol test was conducted with a modified fuel injection pump. Durability aspects including compatibility of various fuels with the materials in the fuel system were not addressed.

  14. Mythologies of an American everyday landscape : Henry Ford at the Wayside Inn

    E-Print Network [OSTI]

    Wortham, Brooke Danielle

    2006-01-01

    Ford purchased property in 1923 in Sudbury, Massachusetts in order to preserve an historic inn associated with the poet Henry Wadsworth Longfellow. Over the next twenty years, his mission expanded to create an idealized ...

  15. Paleoenvrironmental Controls on Diagenesis of Organich-Rich Shales in the Eagle Ford Group 

    E-Print Network [OSTI]

    Kruse, Kendra

    2014-08-27

    abundance and (2) carbonate cement lowered organic matter content by volumetric dilution. An x-ray analytical microscope was used to map elemental compositions of fresh core samples within the Eagle Ford Group. Resultant maps were used to characterize...

  16. Anglo-American Corporate Taxation: Tracing the Common Roots of Divergent Approaches

    E-Print Network [OSTI]

    Bank, Steven A.

    2013-01-01

    as Ford Motor Company, the Mellon family’s Gulf Petroleum3 To avoid diluting family control, the company only issuedand the Duke family’s American Tobacco Company were all

  17. Full Issue

    E-Print Network [OSTI]

    UCLA, Law School

    2013-01-01

    as Ford Motor Company, the Mellon family’s Gulf Petroleum3 To avoid diluting family control, the company only issuedand the Duke family’s American Tobacco Company were all

  18. Model year 2010 Ford Fusion Level-1 testing report.

    SciTech Connect (OSTI)

    Rask, E.; Bocci, D.; Duoba, M.; Lohse-Busch, H.; Energy Systems

    2010-11-23

    As a part of the US Department of Energy's Advanced Vehicle Testing Activity (AVTA), a model year 2010 Ford Fusion was procured by eTec (Phoenix, AZ) and sent to ANL's Advanced Powertrain Research Facility for the purposes of vehicle-level testing in support of the Advanced Vehicle Testing Activity. Data was acquired during testing using non-intrusive sensors, vehicle network information, and facilities equipment (emissions and dynamometer). Standard drive cycles, performance cycles, steady-state cycles, and A/C usage cycles were conducted. Much of this data is openly available for download in ANL's Downloadable Dynamometer Database. The major results are shown in this report. Given the benchmark nature of this assessment, the majority of the testing was done over standard regulatory cycles and sought to obtain a general overview of how the vehicle performs. These cycles include the US FTP cycle (Urban) and Highway Fuel Economy Test cycle as well as the US06, a more aggressive supplemental regulatory cycle. Data collection for this testing was kept at a fairly high level and includes emissions and fuel measurements from an exhaust emissions bench, high-voltage and accessory current/voltage from a DC power analyzer, and CAN bus data such as engine speed, engine load, and electric machine operation. The following sections will seek to explain some of the basic operating characteristics of the MY2010 Fusion and provide insight into unique features of its operation and design.

  19. PROCEEDINGS 2010EMISSIONSCONFERENCE&EXPOVolume55

    E-Print Network [OSTI]

    Azad, Abdul-Majeed

    spent 37 years in the Ford Motor Company Research Laboratory, working on projects including exhaust a Technical Expert at Research and Innovation Center, Ford Motor Company, responsible for boost system Enhancement of Turbocharged Inter-cooling Diesel Engine Performance by Hydrous Ethanol Port Injection Chunde

  20. OR43 Bath: 05/09/2001 INTEGRATED HUMAN PERFORMANCE MODELLING

    E-Print Network [OSTI]

    Aickelin, Uwe

    AND ITS USABILITY WITHIN THE MANUFACTURING SYSTEM DESIGN PROCESS Peer-Olaf Siebers Research Student - Engineering / Computing · Paul Mason - Design / Manufacturing · Steve Mason - Manufacturing / Simulation Additional academic support from John Kay and Val Vitanov Supported by Ford Motor CompanyFord Motor Company

  1. WorkingwithIndustry:WhyCollaborationsareImportant Professional and Academic Development (PAD) Seminar Series

    E-Print Network [OSTI]

    Berdichevsky, Victor

    , and Product Development at Ford Motor Company. Mr. Wegner is responsible for future product plans for all@wayne.edu Brian Wegner, manager of Lincoln Product Planning, Global Product Planning and Strategy Lincoln vehicles. He has worked at Ford Motor Company for 21 years and has held various positions

  2. Electric Motors

    Broader source: Energy.gov [DOE]

    Section 313 of the Energy Independence and Security Act (EISA) of 2007 raised Federal minimum efficiency standards for general-purpose, single-speed, polyphase induction motors of 1 to 500 horsepower (hp). This new standard took effect in December 2010. The new minimum efficiency levels match FEMP's performance requirement for these motors.

  3. QER- Comment of Hyundai Motor Company

    Broader source: Energy.gov [DOE]

    Karen Thank you for getting back to us – please don’t hesitate to contact us if you have any questions or need any additional input

  4. Mission Motors Company | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsourceII Jump to: navigation, search Name Minn-DakotaInformationMiraialMisawa

  5. Public Meetings Registration_web document_120508.xls

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EU Commission Moloney John Ricardo Morgan Jay Ford Motor Company O'Connell Diarmuid Tesla Motors O'Connor Catherine Akin Gump Pisani Michael LM Pittas Jay Remy International...

  6. Outfits - Company E - 17 

    E-Print Network [OSTI]

    Unknown

    2006-01-01

    -in and value Rentals 10% less than 30 days; Rentals: Rental rate 6.25% more than 30; interstate carriers 6.25% Corporate Franchises $2.50 Per $1,000 of taxable capital or or earned surplus, whichever 4.5% is greater. Motor Fuels 20? Gasoline: per gallon Fuel... content Malt Liquor 19.8? Per gallon Mixed Drinks 14% Receipt value (price) Passenger Drinks 5? Per serving Insurance Companies: Life, Accident & Health 1.75% Texas investments Property & Casualty 1.6 - 3.5% Texas investments Title 1.3 - 2.0% Texas...

  7. Collaborative Research Opportunities with Henry Ford Health System: Bones, Brains, Blood Pressure, and Beyond

    E-Print Network [OSTI]

    Finley Jr., Russell L.

    , and Beyond Professional and Academic Development (PAD) Seminar Series Tuesday, January 10, 2012 ­ 9:00 to 10Collaborative Research Opportunities with Henry Ford Health System: Bones, Brains, Blood Pressure Research at HFHS HFHS Department of Orthopaedic Surgery's Bone and Joint Center HFHS Department of Internal

  8. Properties of Ice Clusters from an Analysis of Freezing Nucleation Ian J. Ford

    E-Print Network [OSTI]

    Ford, Ian

    Properties of Ice Clusters from an Analysis of Freezing Nucleation Ian J. Ford Department, and often freezing nucleation experiments are conducted using finely divided liquids, either as an emulsion5 or an aerosol.6-9 In this way, trace impurities, which might aid the freezing process, are confined

  9. Assessment of the Mexican Eagle Ford Shale Oil and Gas Resources 

    E-Print Network [OSTI]

    Morales Velasco, Carlos Armando

    2013-08-02

    According to the 2011 Energy Information Agency (EIA) global assessment, Mexico ranks 4th in shale gas resources. The Eagle Ford shale is the formation with the greatest expectation in Mexico given the success it has had in the US and its liquids...

  10. Ford Hatchery; Washington Department of Fish and Wildlife Fish Program, Hatcheries Division, Annual Report 2003.

    SciTech Connect (OSTI)

    Lovrak, Jon; Ward, Glen

    2004-01-01

    Bonneville Power Administration's participation with the Washington Department of Fish and Wildlife, Ford Hatchery, provides the opportunity for enhancing the recreational and subsistence kokanee fisheries in Banks Lake. The artificial production and fisheries evaluation is done cooperatively through the Spokane Hatchery, Sherman Creek Hatchery (WDFW), Banks Lake Volunteer Net Pen Project, and the Lake Roosevelt Fisheries Evaluation Program. Ford Hatchery's production, together with the Sherman Creek and the Spokane Tribal Hatchery, will contribute to an annual goal of one million kokanee yearlings for Lake Roosevelt and 1.4 million kokanee fingerlings and fry for Banks Lake. The purpose of this multi-agency program is to restore and enhance kokanee salmon and rainbow trout populations in Lake Roosevelt and Banks Lake due to Grand Coulee Dam impoundments. The Ford Hatchery will produce 9,533 lbs. (572,000) kokanee annually for release as fingerlings into Banks Lake in October. An additional 2,133 lbs. (128,000) kokanee will be transferred to net pens on Banks Lake at Electric City in October. The net pen raised kokanee will be reared through the fall, winter, and early spring to a total of 8,533 lbs and released in May. While the origin of kokanee comes from Lake Whatcom, current objectives will be to increase the use of native (or, indigenous) stocks for propagation in Banks Lake and the Upper Columbia River. Additional stocks planned for future use in Banks Lake include Lake Roosevelt kokanee and Meadow Creek kokanee. The Ford Hatchery continues to produce resident trout (80,584 lb. per year) to promote the sport fisheries in trout fishing lakes in eastern Washington (WDFW Management, Region 1). Operation and maintenance funding for the increased kokanee program was implemented in FY 2001 and scheduled to continue through FY 2010. Funds from BPA allow for an additional employee at the Ford Hatchery to assist in the operations and maintenance associated with kokanee production. Fish food, materials, and other supplies associated with this program are also funded by BPA. Other funds from BPA will also improve water quality and supply at the Ford Hatchery, enabling the increased fall kokanee fingerling program. Monitoring and evaluation of the Ford stocking programs will include existing WDFW creel and lake survey programs to assess resident trout releases in trout managed waters. BPA is also funding a creel survey to assess the harvest of hatchery kokanee in Banks Lake.

  11. Sedimentary and Diagenetic Controls on Petroleum System Characteristics of the Upper Cretaceous Eagle Ford Group, South Texas 

    E-Print Network [OSTI]

    Hancock, Travis A

    2014-04-29

    the Eagle Ford Group in McMullen County, Texas. Organic content varies significantly between diagenetic facies, with the least organic matter present in coarsely mineralized shales. This result is consistent with the hypothesis that diagenetic carbonate...

  12. Occurrence of Multiple Fluid Phases Across a Basin, in the Same Shale Gas Formation – Eagle Ford Shale Example 

    E-Print Network [OSTI]

    Tian, Yao

    2014-04-29

    .......................................................................... 97 Relative Permeability ........................................................................ 99 Transmissibility Multiplier ............................................................. 101 Pressure/Volume/Temperature (PVT) Data Acquisition.... Data from Drillinginfo (2013). ........................................................................................ 23 Fig. 20—Eagle Ford Shale reservoir pressure of from PVT analysis results. Data from TRC (2013...

  13. Ford Van Dyke: Compressed Air Management Program Leads to Improvements that Reduce Energy Consumption at an Automotive Transmission Plant

    SciTech Connect (OSTI)

    2010-06-25

    Staff at the Ford Van Dyke Transmission Plant in Sterling Heights, Michigan, have increased the efficiency of the plant’s compressed air system to enhance its performance while saving energy and improving production.

  14. Lateral Continuity of the Eagle Ford Group Strata in Lozier Canyon and Antonio Creek, Terrell County, Texas 

    E-Print Network [OSTI]

    Gardner, Rand D

    2013-09-24

    simplistic assumptions about relevant horizontal reservoir heterogeneities can lead to sub-optimal or uneconomical exploitation. High-resolution correlation of individual beds in the Eagle Ford Group over several miles in Lozier Canyon and Antonio Creek...

  15. Depositional environment and hydrodynamic flow in Guadalupian Cherry Canyon sandstone, West Ford and West Geraldine fields, Delaware Basin, Texas 

    E-Print Network [OSTI]

    Linn, Anne Marie

    1985-01-01

    DEPOSITIONAL ENVIRONMENT AND HYDRODYNAMIC FLOW IN GUADALUPIAN CHERRY CANYON SANDSTONE, WEST FORD AND WEST GERALDINE FIELDS, DELAWARE BASIN, TEXAS A Thesis by Anne Marie Linn Submitted to the Graduate College of Texas ARM Univer sity... in partial fulfillment of the requirement for the degree of MASTER OF SCIENCE August 1985 Major Sub)cot: Geology DEPOSITIONAL ENVIRONMENT AND HYDRODYNAMIC FLOW IN GUADALUPIAN CHERRY CANYON SANDSTONE, WEST FORD AND WEST GERALDINE FIELDS, DELAWARE BASIN...

  16. Advanced Motors

    SciTech Connect (OSTI)

    Knoth, Edward A.; Chelluri, Bhanumathi; Schumaker, Edward J.

    2012-12-14

    Project Summary Transportation energy usage is predicted to increase substantially by 2020. Hybrid vehicles and fuel cell powered vehicles are destined to become more prominent as fuel prices rise with the demand. Hybrid and fuel cell vehicle platforms are both dependent on high performance electric motors. Electric motors for transportation duty will require sizeable low-speed torque to accelerate the vehicle. As motor speed increases, the torque requirement decreases which results in a nearly constant power motor output. Interior permanent magnet synchronous motors (IPMSM) are well suited for this duty. , , These rotor geometries are configured in straight lines and semi circular arc shapes. These designs are of limited configurations because of the lack of availability of permanent magnets of any other shapes at present. We propose to fabricate rotors via a novel processing approach where we start with magnet powders and compact them into a net shape rotor in a single step. Using this approach, widely different rotor designs can be implemented for efficiency. The current limitation on magnet shape and thickness will be eliminated. This is accomplished by co-filling magnet and soft iron powders at specified locations in intricate shapes using specially designed dies and automatic powder filling station. The process fundamentals for accomplishing occurred under a previous Applied Technology Program titled, ���������������¢��������������������������������Motors and Generators for the 21st Century���������������¢�������������������������������. New efficient motor designs that are not currently possible (or cost prohibitive) can be accomplished by this approach. Such an approach to motor fabrication opens up a new dimension in motor design. Feasibility Results We were able to optimize a IPMSM rotor to take advantage of the powder co-filling and DMC compaction processing methods. The minimum low speed torque requirement of 5 N-m can be met through an optimized design with magnet material having a Br capability of 0.2 T. This level of magnetic performance can be met with a variety of bonded magnet compositions. The torque ripple was found to drop significantly by using thinner magnet segments. The powder co-filling and subsequent compaction processing allow for thinner magnet structures to be formed. Torque ripple can be further reduced by using skewing and pole shaping techniques. The techniques can be incorporated into the rotor during the powder co-filling process.

  17. Electric Motor Thermal Management R&D (Presentation)

    SciTech Connect (OSTI)

    Bennion, K.

    2014-11-01

    Thermal constraints place significant limitations on how electric motors ultimately perform. Without the ability to remove heat, the motor cannot operate without sacrificing performance, efficiency, and reliability. Finite element analysis and computational fluid dynamics modeling approaches are being increasingly utilized in the design and analysis of electric motors. As the models become more sophisticated, it is important to have detailed and accurate knowledge of both the passive thermal performance and the active cooling performance. In this work, we provide an overview of research characterizing both passive and active thermal elements related to electric motor thermal management. To better characterize the passive thermal performance, the effective thermal properties and inter-lamination thermal contact resistances were measured for different stator lamination materials. The active cooling performance of automatic transmission fluid (ATF) jets was also measured to better understand the heat transfer coefficients of ATF impinging on motor copper windings. Ford's Mercon LV was the ATF evaluated in this study. The presentation provides an overview of prior work with a focus on describing future plans for research to be performed during FY15.

  18. U.S. Department of Energy FreedomCAR & Vehicle Technologies Program Advanced Vehicle Testing Activity, Hydrogen/CNG Blended Fuels Performance Testing in a Ford F-150

    SciTech Connect (OSTI)

    James E. Francfort

    2003-11-01

    Federal regulation requires energy companies and government entities to utilize alternative fuels in their vehicle fleets. To meet this need, several automobile manufacturers are producing compressed natural gas (CNG)-fueled vehicles. In addition, several converters are modifying gasoline-fueled vehicles to operate on both gasoline and CNG (Bifuel). Because of the availability of CNG vehicles, many energy company and government fleets have adopted CNG as their principle alternative fuel for transportation. Meanwhile, recent research has shown that blending hydrogen with CNG (HCNG) can reduce emissions from CNG vehicles. However, blending hydrogen with CNG (and performing no other vehicle modifications) reduces engine power output, due to the lower volumetric energy density of hydrogen in relation to CNG. Arizona Public Service (APS) and the U.S. Department of Energy’s Advanced Vehicle Testing Activity (DOE AVTA) identified the need to determine the magnitude of these effects and their impact on the viability of using HCNG in existing CNG vehicles. To quantify the effects of using various blended fuels, a work plan was designed to test the acceleration, range, and exhaust emissions of a Ford F-150 pickup truck operating on 100% CNG and blends of 15 and 30% HCNG. This report presents the results of this testing conducted during May and June 2003 by Electric Transportation Applications (Task 4.10, DOE AVTA Cooperative Agreement DEFC36- 00ID-13859).

  19. Implementing Motor Decision Plans 

    E-Print Network [OSTI]

    Elliott, R. N.

    2001-01-01

    The first step to reducing energy costs and increasing reliability in motors is to establish a motor plan. A motor plan allows decisions to be made in advance of motor failure, and increases the options available. By contrast, most motor decisions...

  20. Edinburgh Motor Assessment (EMAS) 

    E-Print Network [OSTI]

    Bak, Thomas

    2013-12-01

    Edinburgh Motor Assessment (EMAS) is a brief motor screening test, specifically designed for assessment of patients with dementia, aphasia and other cognitive disorders. It focuses, therefore, on those motor symptoms, ...

  1. Premium Efficient Motors 

    E-Print Network [OSTI]

    Moser, P. R.

    1984-01-01

    MOTORS Paul R. Moser Baldor Electric Co. Fort Smith, Arkansas , ABSTRACT Premium efficient motors are available which convert electrical energy into mechanical energy with fewer losses than the more standard motors. The fewer losses...

  2. Determining the Depositional Environment of the Lower Eagle Ford Group in Lozier Canyon, Antonio Creek, and Osman Canyon: An Out Crop Study of Bedding Features a Study of Bedding Features at Outcrop Scale or in the Outcrop 

    E-Print Network [OSTI]

    Lyon, Trey Saxon

    2015-05-13

    The Eagle Ford Formation is currently the most economically significant unconventional resource play in the state of Texas. There has been much debate as to the environment of deposition for the lowermost Facies A of the Eagle Ford in outcrop...

  3. The Flux OSKit: A Substrate for Kernel and Language Research Bryan Ford Godmar Back Greg Benson Jay Lepreau Albert Lin Olin Shivers

    E-Print Network [OSTI]

    Utah, University of

    The Flux OSKit: A Substrate for Kernel and Language Research Bryan Ford Godmar Back Greg Benson Jay group to implement even a basic useful OS core---e.g., the function­ ality traditionally found are interesting for research purposes. For exam­ Ford, Back, and Lepreau are at the Univ. of Utah (baford

  4. The Flux OSKit: A Substrate for Kernel and Language Research Bryan Ford Godmar Back Greg Benson Jay Lepreau Albert Lin Olin Shivers

    E-Print Network [OSTI]

    Shivers, Olin

    The Flux OSKit: A Substrate for Kernel and Language Research Bryan Ford Godmar Back Greg Benson Jay for a small group to implement even a basic useful OS core---e.g., the functionality traditionally found, memory management suited for physical memory and its Ford, Back, and Lepreau are at the Univ. of Utah

  5. The Flux OSKit: A Substrate for Kernel and Language Research Bryan Ford Godmar Back Greg Benson Jay Lepreau Albert Lin Olin Shivers

    E-Print Network [OSTI]

    Utah, University of

    The Flux OSKit: A Substrate for Kernel and Language Research Bryan Ford Godmar Back Greg Benson Jay is catalyzing research and development in operating systems and program­ ming languages. Ford, Back, and Lepreau to expand and diversify, it is increasingly impractical for a small group to implement even a basic useful

  6. The Flux OSKit: A Substrate for Kernel and Language Research Bryan Ford Godmar Back Greg Benson Jay Lepreau Albert Lin Olin Shivers

    E-Print Network [OSTI]

    Ford, Bryan

    The Flux OSKit: A Substrate for Kernel and Language Research Bryan Ford Godmar Back Greg Benson Jay a basic useful OS core--e.g., the functionality traditionally found in the Unix kernel--entirely from suited for physical memory and its Ford, Back, and Lepreau are at the Univ. of Utah (baford

  7. The Flux OSKiti A Substrate for Kernel and Language Research Bryan Ford Godmar Back Greg Benson Jay Lepreau Albert Lin Olin Shivers

    E-Print Network [OSTI]

    Brown, Angela Demke

    The Flux OSKiti A Substrate for Kernel and Language Research Bryan Ford Godmar Back Greg Benson Jay a basic useful OS core-eg., the functionality traditionally found in the Unix kernel-entirely from scratch for physical memory and its Ford, Back, and Lqreau are at the Univ. of Utah @aford,gback,lepreau- @cs

  8. Vehicle Technologies Office Merit Review 2014: Development of Modified PAG (polyalkylene glycol) High VI High Fuel Efficient Lubricant for LDV Applications

    Broader source: Energy.gov [DOE]

    Presentation given by Ford Motor Company at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about development of modified...

  9. 2011 CCITT Annual Report // 1 CCITT Center for the Commercialization of

    E-Print Network [OSTI]

    Bustamante, Fabián E.

    are aligned with NUTC strategic areas of research: improving the user experience (2); energy projects. The new group of research partners involved four Fortune 500 companies, including Ford Motor Assistant Professor Industrial Engineering and Management Sciences Diego Klabjan Associate Professor

  10. Vehicle Technologies Office Merit Review 2014: Fuel Properties to Enable Lifted Flame Combustion

    Office of Energy Efficiency and Renewable Energy (EERE)

    Presentation given by Ford Motor Company at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about fuel properties to enable...

  11. Business Advisor at TIE Center andysons@c3bb.com

    E-Print Network [OSTI]

    at Ford Motor Company. Enforced contract workforce rules and led Six Sigma quality improvement teams environment. Implemented Six Sigma training as part of plant wide improvement project and led three individual

  12. Trends in Workplace Charging

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Donofrio Ford Motor Company Trends in Workplace Charging Est EV NA NA approx 21 70-100 Miles: What Types of Chargers are Being Used? Considerations for Campus Installations *...

  13. Urea SCR and DPF System for Diesel Sport Utility Vehicle Meeting...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SCR and DPF System for Diesel Sport Utility Vehicle Meeting Tier II Bin 5 DOE and Ford Motor Company Advanced CIDI Emission Control System Development Program (DE-FC26-01NT41103)...

  14. Vehicle Technologies Office Merit Review 2015: Polyalkylene Glycol (PAG) Based Lubricant for Light & Medium Duty Axles

    Broader source: Energy.gov [DOE]

    Presentation given by Ford Motor Company at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about polyalkylene glycol (PAG)...

  15. 566 IEEE TRANSACTIONS ON SYSTEMS, MAN, AND CYBERNETICS--PART B: CYBERNETICS, VOL. 34, NO. 1, FEBRUARY 2004 An Interactive Framework for Acquiring Vision

    E-Print Network [OSTI]

    Motai, Yuichi

    566 IEEE TRANSACTIONS ON SYSTEMS, MAN, AND CYBERNETICS--PART B: CYBERNETICS, VOL. 34, NO. 1 by the Advanced Manufacturing Technology Development, Ford Motor Company. This paper was recommended by Associate

  16. Vehicle Technologies Office Merit Review 2015: ICME Guided Development of Advanced Cast Aluminum Alloys for Automotive Engine Applications

    Broader source: Energy.gov [DOE]

    Presentation given by Ford Motor Company at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about ICME guided development of...

  17. Vehicle Technologies Office Merit Review 2015: Validation of Material Models for Crash Simulation of Automotive Carbon Fiber Composite Structures (VMM)

    Broader source: Energy.gov [DOE]

    Presentation given by Ford Motor Company at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about validation of material...

  18. A Vehicle Manufacturer’s Perspective on Higher-Octane Fuels

    Broader source: Energy.gov [DOE]

    Breakout Session 1C—Fostering Technology Adoption I: Building the Market for Renewables with High Octane Fuels A Vehicle Manufacturer’s Perspective on Higher-Octane Fuels Tom Leone, Technical Expert, Powertrain Evaluation and Analysis, Ford Motor Company

  19. Sipping fuel and saving lives: increasing fuel economy without sacrificing safety

    E-Print Network [OSTI]

    Gordon, Deborah; Greene, David L.; Ross, Marc H.; Wenzel, Tom P.

    2008-01-01

    Ford delays plans to boost fuel economy of its SUVs. WallImproving safety without impacting fuel economy. Honda MotorCompany, October 4. SIPPING FUEL AND SAVING LIVES / 24

  20. MOTOR BIKES, MOPEDS, AND MOTOR SCOOTERS Registration and Operation

    E-Print Network [OSTI]

    Alpay, S. Pamir

    6. 6.1 MOTOR BIKES, MOPEDS, AND MOTOR SCOOTERS Registration and Operation Motor Bikes, Mopeds, and Motor Scooters are defined as motor vehicles and are subject to all regulations governing motor vehicle operation on the grounds of the University. Such a motor vehicle owned and operated by a member

  1. Plain Language Disclosure for Direct Subsidized Loans and Direct Unsubsidized Loans William D. Ford Federal Direct Loan Program

    E-Print Network [OSTI]

    Royer, Dana

    Plain Language Disclosure for Direct Subsidized Loans and Direct Unsubsidized Loans William D. Ford Subsidized Loan and/or Direct Unsubsidized Loan to help cover the costs of your education. This Plain to separate loans made under the MPN depending on whether the loan is subsidized or unsubsidized, when

  2. Availability in Globally Distributed Storage Systems Daniel Ford, Francois Labelle, Florentina I. Popovici, Murray Stokely, Van-Anh Truong

    E-Print Network [OSTI]

    Cortes, Corinna

    Availability in Globally Distributed Storage Systems Daniel Ford, Franc¸ois Labelle, Florentina I studies of individual components of storage systems, such as disk drives, relatively little has been characterize the availability properties of cloud storage systems based on an extensive one year study

  3. In Proceedings of the Automotive Software Workshop on Future Generation Software Architectures in the Automotive Domain, San Diego, CA, Jan. 10-12, 2004.

    E-Print Network [OSTI]

    Garlan, David

    In Proceedings of the Automotive Software Workshop on Future Generation Software Architectures in the Automotive Domain, San Diego, CA, Jan. 10-12, 2004. Two-tiered Architectural Design for Automotive Control two-tiered design methods for automotive control systems at Ford Motor Company. Currently, Ford has

  4. Hyung Min Kim Research Fellow

    E-Print Network [OSTI]

    Kim, Harrison

    -mail: tjiang@ford.com Core Vehicle Integration Section, North American Family Cars, Ford Motor Company to lower levels using partitioning of the original problem into a hierarchical set of subproblems. For each design problem at a given level, an optimization problem is formulated to minimize deviations from

  5. 2010 Ford Fusion VIN 4757 Hybrid Electric Vehicle Battery Test Results

    SciTech Connect (OSTI)

    Tyler Gray; Matthew Shirk

    2013-01-01

    The U.S. Department of Energy Advanced Vehicle Testing Activity Program consists of vehicle, battery, and infrastructure testing on advanced technology related to transportation. The activity includes tests on hybrid electric vehicles (HEVs), including testing HEV batteries when both the vehicles and batteries are new and at the conclusion of 160,000 miles of on-road fleet testing. This report documents battery testing performed for the 2010 Ford Fusion HEV (VIN: 3FADP0L34AR144757). Battery testing was performed by the Electric Transportation Engineering Corporation dba ECOtality North America. The Idaho National Laboratory and ECOtality North America collaborate on the Advanced Vehicle Testing Activity for the Vehicle Technologies Program of the U.S. Department of Energy.

  6. Ford Plug-In Project: Bringing PHEVs to Market Demonstration and Validation Project

    SciTech Connect (OSTI)

    2013-12-31

    This project is in support of our national goal to reduce our dependence on fossil fuels. By supporting efforts that contribute toward the successful mass production of plug-in hybrid electric vehicles, our nation’s transportation-related fuel consumption can be offset with energy from the grid. Over four and a half years ago, when this project was originally initiated, plug-in electric vehicles were not readily available in the mass marketplace. Through the creation of a 21 unit plug-in hybrid vehicle fleet, this program was designed to demonstrate the feasibility of the technology and to help build cross-industry familiarity with the technology and interface of this technology with the grid. Ford Escape PHEV Demonstration Fleet 3 March 26, 2014 Since then, however, plug-in vehicles have become increasingly more commonplace in the market. Ford, itself, now offers an all-electric vehicle and two plug-in hybrid vehicles in North America and has announced a third plug-in vehicle offering for Europe. Lessons learned from this project have helped in these production vehicle launches and are mentioned throughout this report. While the technology of plugging in a vehicle to charge a high voltage battery with energy from the grid is now in production, the ability for vehicle-to-grid or bi-directional energy flow was farther away than originally expected. Several technical, regulatory and potential safety issues prevented progressing the vehicle-to-grid energy flow (V2G) demonstration and, after a review with the DOE, V2G was removed from this demonstration project. Also proving challenging were communications between a plug-in vehicle and the grid or smart meter. While this project successfully demonstrated the vehicle to smart meter interface, cross-industry and regulatory work is still needed to define the vehicle-to-grid communication interface.

  7. Off-shelf portion of Harris delta: a reexamination of downdip Woodbine-Eagle Ford

    SciTech Connect (OSTI)

    Porter, M.

    1989-03-01

    This study relates the Eagle Ford-equivalent Harris delta north of the Stuart City shelf edge with the downdip Woodbine-Eagle Ford section south of that shelf edge. Together, they comprised one large deltaic complex that divided into two major lobes at an avulsion site near Anderson County. One lobe prograded southwestward toward Kurten field in Brazos County; the other (now partly eroded) prograded southeastward beside the low-lying Sabine (uplift) landmass into Polk County. The Polk County lobe crossed the Stuart City shelf edge in the Seven Oaks-Hortense field area and continued to prograde southward into deeper and higher energy water. Such an environment caused this off-shelf Harris delta to oversteepen, resulting in frequent slumps and gravity flows that deposited debris-flow and turbidite sands along with predominantly fine-grained prodelta sediments. More familiar deltaic facies (outer fringe) are present in the uppermost section. Numerous structural and stratigraphic maps and cross sections illustrate the progradation of the downdip Harris delta and its features. The progradation was arrested for a time by deeper water at the older and more precipitous Sligo shelf edge. This progradational hiatus is recorded by a relatively strong reflection that separates two seismic sequences. The younger, onlapping sequence appears to represent continued Harris delta sedimentation. Among the interesting features mapped seismically and/or geologically are mounded reflections that represent the largest slumping events, thickness anomalies associated with the carbonate substrate, and erosional( ) channels at the section top. These off-shelf Harris delta deposits appear to interfinger laterally with a genetically different eastern (Tuscaloosa ) sequence in Tyler and Jasper Counties.

  8. Off-shelf portion of Harris delta: Reexamination of downdip Woodbine-Eagle Ford

    SciTech Connect (OSTI)

    Porter, M.H. ); Van Siclen, D.C.; Sheriff, R.E. )

    1989-09-01

    This study related the Eagle Ford equivalent Harris delta north of the Stuart City shelf edge with downdip Woodbine-Eagle Ford section south of that shelf edge. Together, they comprised one large deltaic complex that divided into two major lobes at an avulsion site near Anderson County, Texas. One lobe prograded southwestward toward Kurten field in Brazos County, the other (now partly eroded) prograded southeastward beside the low-lying Sabine (uplift) landmass into Polk County. The Polk County lobe crossed the Stuart City shelf edge in the Seven Oaks-Hortense field area, and continued to prograde southward into deeper and higher energy water. Such an environment caused this off-shelf Harris delta to oversteepen, resulting in frequent slumps and gravity flows that deposited debris-flow and turbidite sands along with predominantly fine-grained prodelta sediments. More familiar deltaic facies (outer fringe) are present in the uppermost section. Numerous structural and stratigraphic maps and cross sections illustrate the progradation of the downdip Harris delta and its features. The progradation was arrested for a time by deeper water at the older and more precipitous Sligo shelf edge. This progradational hiatus is recorded by a relatively strong reflection that separates two seismic sequences. The younger onlapping sequence appears to represent continued Harris delta sedimentation. among the interesting features mapped seismically and/or geologically are: mounded reflections that represent the largest slumping events, thickness anomalies associated with the carbonate substrate, and erosional( ) channels at the section top. These off-shelf Harris delta deposits appear to interfinger laterally with a genetically different eastern (Tuscaloosa ) sequence in Tyler and Jasper Counties.

  9. Stepping Motor Control System

    E-Print Network [OSTI]

    Larson, Noble G.

    This paper describes a hardware system designed to facilitate position and velocity control of a group of eight stepping motors using a PDP-11. The system includes motor driver cards and other interface cards in addition ...

  10. Quantum motor and future

    E-Print Network [OSTI]

    Evgeny G. Fateev

    2013-01-20

    In a popular language, the possibilities of the Casimir expulsion effect are presented, which can be the basis of quantum motors. Such motors can be in the form of a special multilayer thin film with periodic and complex nanosized structures. Quantum motors of the type of the Casimir platforms can be the base of transportation, energy and many other systems in the future.

  11. Motor Control STEVEN P. WISE

    E-Print Network [OSTI]

    Shadmehr, Reza

    Motor Control STEVEN P. WISE National Institute of Mental Health REZA SHADMEHR Johns Hopkins University I. What Controls Movement II. What the Motor System Controls III. Mechanisms of Motor Control IV. Motor Memory V. Flexibility in Motor Control VI. Evolution of the Motor System GLOSSARY agonist A muscle

  12. General Motors Corporation and Pacific Northwest Laboratory Staff Exchange: Instrumentation for rapid measurement of automotive exhaust emissions

    SciTech Connect (OSTI)

    Griffin, J.W.; Sharpe, S.W.; Sloane, T.M.

    1995-07-01

    Information in this report on the staff exchange of Pacific Northwest Laboratory (PNL) staff with the AIGER Consortium (General Motors, Ford, Chrysler, Navistar, the environmental protection Agency, and the California Air Resources Board) includes the purpose and objectives, a summary of activities, significant accomplishments, significant problems, industry benefits realized, recommended follow-on work and potential benefits from that work, and two appendices. Appendix A is a brief description of the fast gas chromatography and infrared spectroscopy chemometric technologies and their application to the rapid characterization of automobile exhaust emissions. Appendix B is a list of key contacts and the schedule of activities pertaining to the staff exchange.

  13. Motor/generator

    DOE Patents [OSTI]

    Hickam, Christopher Dale (Glasford, IL)

    2008-05-13

    A motor/generator is provided for connecting between a transmission input shaft and an output shaft of a prime mover. The motor/generator may include a motor/generator housing, a stator mounted to the motor/generator housing, a rotor mounted at least partially within the motor/generator housing and rotatable about a rotor rotation axis, and a transmission-shaft coupler drivingly coupled to the rotor. The transmission-shaft coupler may include a clamp, which may include a base attached to the rotor and a plurality of adjustable jaws.

  14. In Proceedings of the First European Workshop on Model Driven Architecture with Emphasis on Industrial Application, March 17-18, 2004. Enschede, The Netherlands.

    E-Print Network [OSTI]

    Garlan, David

    Motor Company, we built a tool to support multilevel architectural design. The tool, called Synergy choices for solving them. 1. Motivation Over the past few years, Ford Motor Company has experienced to embedded control systems, including avionics as well as automotive systems. The DARPA-sponsored Mo

  15. BuildSense Compressed natural gas (CNG) bi-fuel conversions for two Ford F-series pickup trucks.

    E-Print Network [OSTI]

    BuildSense Compressed natural gas (CNG) bi-fuel conversions for two Ford F-series pickup trucks $141,279 $35,320 $176,599 City of Charlotte Solid Waste Services Compressed natural gas ( CNG) up fits of Cary. Wake $121,779 $40,799 $162,578 Waste Industries Fifty-two CNG up fits on refuse trucks in Raleigh

  16. Sec. Chu Announces the First Auto Loans for Advanced Technologies

    SciTech Connect (OSTI)

    Secretary Chu

    2009-07-16

    Energy Secretary Steven Chu announced $8 billion in conditional loan commitments for the development of innovative, advanced vehicle technologies that will create thousands of green jobs while helping reduce the nation’s dangerous dependence on foreign oil. The first three auto loans for advanced technologies were awarded to Ford Motor Company, Nissan Motors and Tesla Motors.

  17. Sec. Chu Announces the First Auto Loans for Advanced Technologies

    ScienceCinema (OSTI)

    Secretary Chu

    2010-09-01

    Energy Secretary Steven Chu announced $8 billion in conditional loan commitments for the development of innovative, advanced vehicle technologies that will create thousands of green jobs while helping reduce the nation?s dangerous dependence on foreign oil. The first three auto loans for advanced technologies were awarded to Ford Motor Company, Nissan Motors and Tesla Motors.

  18. Parametric electric motor study

    SciTech Connect (OSTI)

    Adams, D. [Lockheed Martin Energy Systems, Inc., Oak Ridge, TN (United States); Stahura, D. [GM-AC Delco Systems, Indianapolis, IN (United States)

    1995-04-30

    Technology for the axial gap motor was developed by DOE with an investment of approximately $15 million. This development effort is for motor technologies of high power density and high efficiency. Such motors that are also small and light-weight are not available on the commercial market because high-power motors have typically been used in large industrial applications where small size and light weight are not requirements. AC Delco has been developing motors since 1918 and is interested in leveraging its research and development dollars to produce an array of motor systems for vehicles and to develop a future line of propulsion products. The DOE focus of the study was applied to machining applications. The most attractive feature of this motor is the axial air gap, which may make possible the removal of the motor`s stationary component from a total enclosure of the remainder of the machine if the power characteristics are adequate. The objectives of this project were to evaluate alternative electric drive systems for machine tools and automotive electric drive systems and to select a best machine type for each of those applications. A major challenge of this project was to produce a small, light-weight, highly efficient motor at a cost-effective price. The project developed machine and machine drive systems and design criteria for the range of applications. The final results included the creation of a baseline for developing electric vehicle powertrain system designs, conventional vehicle engine support system designs, and advanced machine tool configurations. In addition, an axial gap permanent magnet motor was built and tested, and gave, said one engineer involved, a sterling performance. This effort will commercialize advanced motor technology and extend knowledge and design capability in the most efficient electric machine design known today.

  19. Hybrid vehicle motor alignment

    DOE Patents [OSTI]

    Levin, Michael Benjamin (Ann Arbor, MI)

    2001-07-03

    A rotor of an electric motor for a motor vehicle is aligned to an axis of rotation for a crankshaft of an internal combustion engine having an internal combustion engine and an electric motor. A locator is provided on the crankshaft, a piloting tool is located radially by the first locator to the crankshaft. A stator of the electric motor is aligned to a second locator provided on the piloting tool. The stator is secured to the engine block. The rotor is aligned to the crankshaft and secured thereto.

  20. Traffic of Molecular Motors

    E-Print Network [OSTI]

    Stefan Klumpp; Melanie J. I. Müller; Reinhard Lipowsky

    2005-12-06

    Molecular motors perform active movements along cytoskeletal filaments and drive the traffic of organelles and other cargo particles in cells. In contrast to the macroscopic traffic of cars, however, the traffic of molecular motors is characterized by a finite walking distance (or run length) after which a motor unbinds from the filament along which it moves. Unbound motors perform Brownian motion in the surrounding aqueous solution until they rebind to a filament. We use variants of driven lattice gas models to describe the interplay of their active movements, the unbound diffusion, and the binding/unbinding dynamics. If the motor concentration is large, motor-motor interactions become important and lead to a variety of cooperative traffic phenomena such as traffic jams on the filaments, boundary-induced phase transitions, and spontaneous symmetry breaking in systems with two species of motors. If the filament is surrounded by a large reservoir of motors, the jam length, i.e., the extension of the traffic jams is of the order of the walking distance. Much longer jams can be found in confined geometries such as tube-like compartments.

  1. Neural correlates underlying motor map plasticity and skilled motor behavior

    E-Print Network [OSTI]

    Ramanathan, Dhakshin

    2007-01-01

    of neurons within the motor cortex. Physiol Rev, 1975. 55(and S.P. Wise, The motor cortex of the rat: cytoarchitecturedelayed changes of rat motor cortical output representation

  2. Transcription Pharmaceutical Company

    E-Print Network [OSTI]

    Oliva, Aude

    Transcription Pharmacy CDC Pharmaceutical Company Pharmacy Benefits Manager Analytics ICU thedatamap.org #12;Transcription Pharmacy CDC Pharmaceutical Company Pharmacy Benefits Manager Analytics Management Researcher Consulting Physician Health IT Other Government Federal Trade Commission You

  3. Improve Motor System Performance with MotorMaster+

    SciTech Connect (OSTI)

    2010-08-01

    Fact sheet describes how industrial plants can improve their motor system performance using DOE-AMO's MotorMaster+ software tool.

  4. Dynein Motor Domain Shows Ring-Shaped Motor, Buttress

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Motor, Buttress Print Movement is fundamental to life. It takes place even at the cellular level where cargo is continually being transported by motor proteins. These tiny...

  5. Ontario Hydro Motor Efficiency Study 

    E-Print Network [OSTI]

    Dautovich, D. R.

    1980-01-01

    Electric motors consume more than one-half of the electrical energy produced by Ontario Hydro. In the residential sector, the major motor load is for refrigerators and freezers while packaged equipment dominate the motor load in the commercial...

  6. Market Research Company Description

    E-Print Network [OSTI]

    Dahl, David B.

    development - Market research for enterprise and education adoption - Plan and execute a company-wide pingMarket Research Company Description: A company focused on developing web-based graphical and future products and then develop the necessary strategies and collateral to stay on the bleeding edge

  7. Accounting Projects Company Description

    E-Print Network [OSTI]

    Dahl, David B.

    and international tax work for individuals, closely held companies, family offices and clients expecting a liquidityAccounting Projects Company Description: CPA firm performing accounting services, bookkeeping. Company Description: a full service CPA firm headquartered in the San Francisco Bay Area. Nationally

  8. Intro for Managing in a Modular Age Carl Shapiro and Hal R. Varian

    E-Print Network [OSTI]

    Varian, Hal R.

    than 240 companies entered the fledgling automotive business. In 1910 there was a mini- recession not interested in parts standardization? The two largest companies in the industry: Ford Motor Company, gasoline) but eventually for most generic parts. Recently, several auto firms have found it attractive

  9. Improve Motor System Efficiency for a Broad Range of Motors with MotorMaster+ International

    SciTech Connect (OSTI)

    2005-05-01

    Available at no charge, MotorMaster+ International is designed to support motor systems improvement planning at industrial facilities by identifying the most cost-effective choice when deciding to repair or replace older motor models.

  10. Issue # 06 By. Marvin Green (503) 6568367. Check out 'THE VOR' by Tom Lonergan and Carl Frederick, Hayden Book Company.

    E-Print Network [OSTI]

    ­8001 (orders only) (215) 788­5583 (office) Kelvin Electronics DC motors, power supplies, batteries. 7 Fairchild, Hayden Book Company. GET THESE CATALOGS! Combined list of some good places to find robot parts mail order. Marlin P. Jones

  11. Advanced Vehicle Testing Activity: Low-Percentage Hydrogen/CNG Blend, Ford F-150 -- Operating Summary

    SciTech Connect (OSTI)

    Karner, D.; Francfort, James Edward

    2003-01-01

    Over the past two years, Arizona Public Service, a subsidiary of Pinnacle West Capital Corporation, in cooperation with the U.S. Department of Energy’s Advanced Vehicle Testing Activity, tested four gaseous fuel vehicles as part of its alternative fueled vehicle fleet. One vehicle operated initially using compressed natural gas (CNG) and later a blend of CNG and hydrogen. Of the other three vehicles, one was fueled with pure hydrogen and two were fueled with a blend of CNG and hydrogen. The three blended-fuel vehicles were originally equipped with either factory CNG engines or factory gasoline engines that were converted to run CNG fuel. The vehicles were variously modified to operate on blended fuel and were tested using 15 to 50% blends of hydrogen (by volume). The pure-hydrogen-fueled vehicle was converted from gasoline fuel to operate on 100% hydrogen. All vehicles were fueled from the Arizona Public Service’s Alternative Fuel Pilot Plant, which was developed to dispense gaseous fuels, including CNG, blends of CNG and hydrogen, and pure hydrogen with up to 99.9999% purity The primary objective of the test was to evaluate the safety and reliability of operating vehicles on hydrogen and blended hydrogen fuel, and the interface between the vehicles and the hydrogen fueling infrastructure. A secondary objective was to quantify vehicle emissions, cost, and performance. Over a total of 40,000 fleet test miles, no safety issues were found. Also, significant reductions in emissions were achieved by adding hydrogen to the fuel. This report presents results of 16,942 miles of testing for one of the blended fuel vehicles, a Ford F-150 pickup truck, operating on up to 30% hydrogen/70% CNG fuel.

  12. Advanced Vehicle Testing Activity: High-Percentage Hydrogen/CNG Blend, Ford F-150 -- Operating Summary

    SciTech Connect (OSTI)

    Don Karner; Francfort, James Edward

    2003-01-01

    Over the past two years, Arizona Public Service, a subsidiary of Pinnacle West Capital Corporation, in cooperation with the U.S. Department of Energy’s Advanced Vehicle Testing Activity, tested four gaseous fuel vehicles as part of its alternative fueled vehicle fleet. One vehicle operated initially using compressed natural gas (CNG) and later a blend of CNG and hydrogen. Of the other three vehicles, one was fueled with pure hydrogen and two were fueled with a blend of CNG and hydrogen. The three blended-fuel vehicles were originally equipped with either factory CNG engines or factory gasoline engines that were converted to run CNG fuel. The vehicles were variously modified to operate on blended fuel and were tested using 15 to 50% blends of hydrogen (by volume). The pure-hydrogen-fueled vehicle was converted from gasoline fuel to operate on 100% hydrogen. All vehicles were fueled from the Arizona Public Service’s Alternative Fuel Pilot Plant, which was developed to dispense gaseous fuels, including CNG, blends of CNG and hydrogen, and pure hydrogen with up to 99.9999% purity. The primary objective of the test was to evaluate the safety and reliability of operating vehicles on hydrogen and blended hydrogen fuel, and the interface between the vehicles and the hydrogen fueling infrastructure. A secondary objective was to quantify vehicle emissions, cost, and performance. Over a total of 40,000 fleet test miles, no safety issues were found. Also, significant reductions in emissions were achieved by adding hydrogen to the fuel. This report presents the results of 4,695 miles of testing for one of the blended fuel vehicles, a Ford F-150 pickup truck, operating on up to 50% hydrogen–50% CNG fuel.

  13. System and method for motor parameter estimation

    DOE Patents [OSTI]

    Luhrs, Bin; Yan, Ting

    2014-03-18

    A system and method for determining unknown values of certain motor parameters includes a motor input device connectable to an electric motor having associated therewith values for known motor parameters and an unknown value of at least one motor parameter. The motor input device includes a processing unit that receives a first input from the electric motor comprising values for the known motor parameters for the electric motor and receive a second input comprising motor data on a plurality of reference motors, including values for motor parameters corresponding to the known motor parameters of the electric motor and values for motor parameters corresponding to the at least one unknown motor parameter value of the electric motor. The processor determines the unknown value of the at least one motor parameter from the first input and the second input and determines a motor management strategy for the electric motor based thereon.

  14. QER- Comment of Southern Company

    Broader source: Energy.gov [DOE]

    Southern Company Services, Inc., as agent for Alabama Power Company, Georgia Power Company, Gulf Power Company, and Mississippi Power Company, (collectively, “Southern Companies”), are pleased to hereby provide their comments to the Department of Energy as it prepares the Quadrennial Energy Review. If there is anything else that we can do in this regard, please feel free to contact us.

  15. Justification for Energy Efficient Motors 

    E-Print Network [OSTI]

    Buschart, R. J.

    1981-01-01

    This paper presents the results of a study of Energy Efficient (or EE) motors in NEMA frame sizes, (1-200 HP). It examines the economics of using EE motors for new motor requirements, as replacements for motors - instead of rewinding...

  16. Molecular Motors: A Theorist's Perspective

    E-Print Network [OSTI]

    Molecular Motors: A Theorist's Perspective Anatoly B. Kolomeisky1 and Michael E. Fisher2 1/0505-0675$20.00 Key Words motor proteins, kinesin, myosin, single-molecule experiments, discrete stochastic models Abstract Individual molecular motors, or motor proteins, are enzymatic molecules that convert chemical

  17. Markov Process of Muscle Motors

    E-Print Network [OSTI]

    Yu. Kondratiev; E. Pechersky; S. Pirogov

    2007-06-20

    We study a Markov random process describing a muscle molecular motor behavior. Every motor is either bound up with a thin filament or unbound. In the bound state the motor creates a force proportional to its displacement from the neutral position. In both states the motor spend an exponential time depending on the state. The thin filament moves at its velocity proportional to average of all displacements of all motors. We assume that the time which a motor stays at the bound state does not depend on its displacement. Then one can find an exact solution of a non-linear equation appearing in the limit of infinite number of the motors.

  18. Energy Efficient Motors 

    E-Print Network [OSTI]

    Hoffmeyer, W.

    1982-01-01

    Efficiency is only one aspect of motor performance. This paper discusses how efficiency is influenced by such factors as horsepower rating, poles, actual load, and starting requirements. It discusses some of the variables affecting efficiency...

  19. MotorWeek

    SciTech Connect (OSTI)

    2009-01-01

    In 2008, PBS's MotorWeek, television's original automotive magazine, visited Argonne's Transportation Technology R&D Center "to learn what it really takes to make clean power sources a viable reality."

  20. Linear Motor Powered Transportation

    E-Print Network [OSTI]

    Thornton, Richard D.

    This special issue on linear-motor powered transportation covers both supporting technologies and innovative transport systems in various parts of the World, as this technology moves from the lab to commercial operations. ...

  1. MotorWeek

    ScienceCinema (OSTI)

    None

    2013-04-19

    In 2008, PBS's MotorWeek, television's original automotive magazine, visited Argonne's Transportation Technology R&D Center "to learn what it really takes to make clean power sources a viable reality."

  2. Cost Effective, High Efficiency Integrated Systems Approach to Auxilliary Electric Motors

    SciTech Connect (OSTI)

    Roy Kessinger Jr.; Keith Seymour; Kanchan Angal; Jason Wolf; Steve Brewer; Leonard Schrank

    2003-09-26

    The CARAT program, carried out by Kinetic Art & Technology Corporation (KAT), has been one of the most commercially successful KAT R&D programs to date. Based on previous development of its technology, KAT designed, constructed and tested a highly efficient motor and controller system under this CARAT program with supplemental commercial funding. Throughout this CARAT effort, the technical objectives have been refined and refocused. Some objectives have been greatly expanded, while others have been minimized. The determining factor in all decisions to refocus the objectives was the commercial need, primarily the needs of KAT manufacturing partners. Several companies are employing the resulting CARAT motor and controller designs in prototypes for commercial products. Two of these companies have committed to providing cost share in order to facilitate the development. One of these companies is a major manufacturing company developing a revolutionary new family of products requiring the ultra-high system efficiency achievable by the KAT motor and controller technologies (known as Segmented ElectroMagnetic Array, or SEMA technology). Another company requires the high efficiency, quiet operation, and control characteristics afforded by the same basic motor and controller for an advanced air filtration product. The combined annual production requirement projected by these two companies exceeds one million units by 2005.

  3. Capital Reporting Company Quadrennial ...

    Broader source: Energy.gov (indexed) [DOE]

    3 05-27-2014 (866) 448 - DEPO www.CapitalReportingCompany.com 2014 1 QUADRENNIAL ENERGY REVIEW STAKEHOLDER MEETING 3 PETROLEUM TRANSMISSION, STORAGE AND DISTRIBUTION ISSUES...

  4. Capital Reporting Company Quadrennial ...

    Broader source: Energy.gov (indexed) [DOE]

    - DEPO www.CapitalReportingCompany.com 2014 1 UNITED STATE OF AMERICA DEPARTMENT OF ENERGY ---: : IN RE: : : QUADRENNIAL ENERGY REVIEW : : NEW...

  5. Marketing Plan Company Description

    E-Print Network [OSTI]

    Dahl, David B.

    Marketing Plan Company Description: Consumer company that provides a product to helps boost Marketing Swat Team Project Description and Deliverables: The team will Identify the best online vehicles of promotions from YouTube celebs, co- marketing with related businesses, affiliate marketing, cross marketing

  6. Entrepreneurship Company Description

    E-Print Network [OSTI]

    Dahl, David B.

    with an industry leader). The team will also help to identify key management team members that may be brought on for venture capital funding presentation, key management team member recommendations. Company Description and headquartered in Utah. Our company conducts pharmaceutical trials in the neurosciences, particularly

  7. Garden Variety Coffee Company

    E-Print Network [OSTI]

    Wismath, Stephen

    Garden Variety Coffee Company Hiroba Nippon Got Fries? Icy's Subway Pitas, Wraps, Fruit Smoothies legend. The Attic Grill Boston Pizza Brewsters Brewing Company The Cheesecake Café Coco Pazzo Italian Café Dionysios Earl's New to downtown Lethbridge. Fine dining menu. 2 Floor 411-3rd. Ave. South Family

  8. Motor Control CTIO 60 inches CHIRON

    E-Print Network [OSTI]

    Tokovinin, Andrei A.

    Motor Control CTIO 60 inches CHIRON CHI60HF8.1 La Serena, December 2010 #12;Contents..............................................................................................................................3 1. Image Slicer motor..............................................................................................................5 2. Focus motor

  9. Commercial Motor Vehicle Brake-Related Research

    E-Print Network [OSTI]

    Commercial Motor Vehicle Brake-Related Research Commercial Motor Vehicle Roadside Technology Corridor Safety Technology Showcase October 14, 2010 Commercial Motor Vehicle Roadside Technology Corridor

  10. Brushless Motor Controller Report Spring 2010

    E-Print Network [OSTI]

    Ruina, Andy L.

    Brushless Motor Controller Report Spring 2010 May 15, 2010 Brian Clementi MAE of 2010 322 Bogert ...................................................................................................... 5 A. Motor Description...................................................................................................... 5 B. The Motor Controller Board

  11. Sensory-Motor Integration and Control

    E-Print Network [OSTI]

    Welch, Dan Bruce

    2011-01-01

    spinal interneurons during motor pattern generation inStep, Swim, and Scratch Motor Patterns in the Turtle. JStep, Swim, and Scratch Motor Patterns in the Turtle. J

  12. US Energy Secretary Chu Announces Finalized $5.9 Billion Loan for Ford

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyThe U.S.Laclede GasEfficiency|Feed| DepartmentOFAdvanced Vehicle TechnologyMotor

  13. Dynein Motor Domain Shows Ring-Shaped Motor, Buttress

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Dynein Motor Domain Shows Ring-Shaped Motor, Buttress Print Movement is fundamental to life. It takes place even at the cellular level where cargo is continually being transported...

  14. Motor current signature analysis method for diagnosing motor operated devices

    DOE Patents [OSTI]

    Haynes, Howard D. (Kingston, TN); Eissenberg, David M. (Oak Ridge, TN)

    1990-01-01

    A motor current noise signature analysis method and apparatus for remotely monitoring the operating characteristics of an electric motor-operated device such as a motor-operated valve. Frequency domain signal analysis techniques are applied to a conditioned motor current signal to distinctly identify various operating parameters of the motor driven device from the motor current signature. The signature may be recorded and compared with subsequent signatures to detect operating abnormalities and degradation of the device. This diagnostic method does not require special equipment to be installed on the motor-operated device, and the current sensing may be performed at remote control locations, e.g., where the motor-operated devices are used in accessible or hostile environments.

  15. Design and prototyping methods for brushless motors and motor control

    E-Print Network [OSTI]

    Colton, Shane W. (Shane William)

    2010-01-01

    In this report, simple, low-cost design and prototyping methods for custom brushless permanent magnet synchronous motors are explored. Three case-study motors are used to develop, illustrate and validate the methods. Two ...

  16. Bent shaft motor

    DOE Patents [OSTI]

    Benavides, Gilbert L. (Albuquerque, NM)

    1998-01-01

    A nonelectromagnetic motor comprising a base, a bent shaft which is rotable relative to the base wherein the bent shaft comprises a straight portion aligned with a main axis and an offset portion that is offset with respect to the main axis; and a drive means for driving the offset portion of the bent shaft along a generally circular path in a plane perpendicular to the main axis to rotate the bent shaft. The bent shaft and drive means for driving the bent shaft can be selected from piezoelectric, magnetostrictive, rheological and shape memory alloys. The drive means of the nonelectromagnetic motor can additionally comprise a shell which shell surrounds and houses the bent shaft and precesses or gyrates which in turn causes the bent drive shaft to rotate. The nonelectromagnetic motor does not rely on friction for the application of torque upon a rotor.

  17. Bent shaft motor

    DOE Patents [OSTI]

    Benavides, G.L.

    1998-05-05

    A nonelectromagnetic motor comprising a base, a bent shaft which is rotatable relative to the base wherein the bent shaft comprises a straight portion aligned with a main axis and an offset portion that is offset with respect to the main axis; and a drive means for driving the offset portion of the bent shaft along a generally circular path in a plane perpendicular to the main axis to rotate the bent shaft. The bent shaft and drive means for driving the bent shaft can be selected from piezoelectric, magnetostrictive, rheological and shape memory alloys. The drive means of the nonelectromagnetic motor can additionally comprise a shell which shell surrounds and houses the bent shaft and precesses or gyrates which in turn causes the bent drive shaft to rotate. The nonelectromagnetic motor does not rely on friction for the application of torque upon a rotor. 11 figs.

  18. Replacing Motors Counting Savings: Results from a 100 Motor Study 

    E-Print Network [OSTI]

    Kaufman, N. M.

    2006-01-01

    that this model is too simple for application in the complex economy of industry. When new motor purchase is planned and specifically budgeted, particularly for expansion or upgrade, it makes sense to account for the present value of the energy savings... based on manufacturer data of available motors accurately reflected the motors found in industry. Based on testing results of 64 motors operating in industry for at least the past ten years, it is determined that tested values at rated load do...

  19. Method for assessing motor insulation on operating motors

    DOE Patents [OSTI]

    Kueck, John D. (Oak Ridge, TN); Otaduy, Pedro J. (Oak Ridge, TN)

    1997-01-01

    A method for monitoring the condition of electrical-motor-driven devices. The method is achieved by monitoring electrical variables associated with the functioning of an operating motor, applying these electrical variables to a three phase equivalent circuit and determining non-symmetrical faults in the operating motor based upon symmetrical components analysis techniques.

  20. Magnetically Coupled Adjustable Speed Motor Drives - Motor Tip Sheet #13

    SciTech Connect (OSTI)

    2008-07-01

    Alternating current electric motors rotate at a nearly constant speed that is determined by motor design and line frequency. Energy savings of 50% or more may be available when fixed speed systems are modified to allow the motor speed to match variable load requirements of a centrifugal fan or pump.

  1. Method for assessing motor insulation on operating motors

    DOE Patents [OSTI]

    Kueck, J.D.; Otaduy, P.J.

    1997-03-18

    A method for monitoring the condition of electrical-motor-driven devices is disclosed. The method is achieved by monitoring electrical variables associated with the functioning of an operating motor, applying these electrical variables to a three phase equivalent circuit and determining non-symmetrical faults in the operating motor based upon symmetrical components analysis techniques. 15 figs.

  2. Verification of Motor Repair Quality 

    E-Print Network [OSTI]

    Butler, K.

    1998-01-01

    is done properly. But how can an industrial customer know that the motor has been repaired properly?...

  3. Filament depolymerization by motor molecules

    E-Print Network [OSTI]

    Gernot A. Klein; Karsten Kruse; Gianaurelio Cuniberti; Frank Juelicher

    2005-01-24

    Motor proteins that specifically interact with the ends of cytoskeletal filaments can induce filament depolymerization. A phenomenological description of this process is presented. We show that under certain conditions motors dynamically accumulate at the filament ends. We compare simulations of two microscopic models to the phenomenological description. The depolymerization rate can exhibit maxima and dynamic instabilities as a function of the bulk motor density for processive depolymerization. We discuss our results in relation to experimental studies of Kin-13 family motor proteins.

  4. Development of the Ford QVM CNG bi-fuel 4.9L F-Series pickup truck

    SciTech Connect (OSTI)

    Lapetz, J.; McCarthy, D.; Greenfield, N. [Ford Motor Co., Dearborn, MI (United States)] [and others

    1996-09-01

    A bi-fuel (Compressed Natural Gas [CNG] and gasoline) pickup truck has been developed using the Ford Alternative Fuel Qualified Vehicle Modifier (QVM) process. The base vehicle`s 4.9L engine has been specially modified for improved durability on gaseous fuels. The base vehicle`s configuration has been designed for conversion to bi-fuel CNG operation. A complete CNG fuel system has been designed and qualified, including fuel tanks, fuel system, and electrical interface. The completed vehicle has been safety and emission certified, demonstrating CARB Low Emission Vehicle (LEV) emissions in MY95. This paper details the design objectives, development process, CNG components, and integration of the two fuel systems.

  5. Magazine R729 Motor prediction

    E-Print Network [OSTI]

    Flanagan, Randy

    Magazine R729 Primer Motor prediction Daniel M. Wolpert* and J. Randall Flanagan The concept of motor prediction was first considered by Helmholtz when trying to understand how we localise visual position of the eye, predicted the gaze position based on a copy of the motor command acting on the eye

  6. Kinematic Motor Learning Wolfram Schenck

    E-Print Network [OSTI]

    Moeller, Ralf

    Kinematic Motor Learning Wolfram Schenck Computer Engineering Group Faculty of Technology Bielefeld-521-106-6440 mail: wschenck@ti.uni-bielefeld.de Abstract This paper focuses on adaptive motor control in the kinematic domain. Several motor learning strategies from the literature are adopted to kinematic problems

  7. MACHINE AND FOUNDRY COMPANY

    Office of Legacy Management (LM)

    MACHINE AND FOUNDRY COMPANY kt '- : :' ENGINEERING DIVISIOJ ---. Cl FIELD iRIP ,REP@?T ,' i;:z;zy MEETING REPORT : .I.-.-' Y ::,:I :. &, .I7 ENGINEERING REPORT- : T, ...

  8. Capital Reporting Company Quadrenntial ...

    Broader source: Energy.gov (indexed) [DOE]

    Quadrenntial Energy Review 04-21-2014 (866) 448 - DEPO www.CapitalReportingCompany.com 2014 1 NEW ENGLAND REGIONAL INFRASTRUCTURE CONSTRAINTS A Public Meeting on the Quadrennial...

  9. Capital Reporting Company Quadrennial ...

    Broader source: Energy.gov (indexed) [DOE]

    07-21-2014 (866) 448 - DEPO www.CapitalReportingCompany.com 2014 1 QUADRENNIAL ENERGY REVIEW PUBLIC MEETING 6 MONDAY, JULY 21, 2014 HELD AT: RASHID AUDITORIUM-HILLMAN CENTER...

  10. Capital Reporting Company Quadrennial ...

    Broader source: Energy.gov (indexed) [DOE]

    11-2014 (866) 448 - DEPO www.CapitalReportingCompany.com 2014 1 QUADRENNIAL ENERGY REVIEW PUBLIC MEETING 10: Infrastructure Constraints Monday, August 11, 2014 New Mexico State...

  11. Motor technology for mining applications advances

    SciTech Connect (OSTI)

    Fiscor, S.

    2009-08-15

    AC motors are steadily replacing DC motors in mining and mineral processing equipment, requiring less maintenance. The permanent magnet rotor, or the synchronous motor, has enabled Blador to introduce a line of cooling tower motors. Synchronous motors are soon likely to take over from the induction motor. 1 photo.

  12. The virtual oil company

    SciTech Connect (OSTI)

    Garibaldi, C.A.; Haney, R.M.; Ross, C.E. [Arthur D Little, Houston, TX (United States)

    1995-09-01

    In anticipation of continuing declines in upstream activity levels over the next 15 years, the virtual oil company model articulates a vision of fewer, leaner, but financially stronger firms that concentrate only on their core competencies and outsource the rest through well-structured partnering arrangements. Freed from the ``clutter,`` these leading companies will be in better position to focus on those opportunities that offer the potential for renewed reserve and revenue growth.

  13. Company and Industry Research guide

    E-Print Network [OSTI]

    Azevedo, Ricardo

    are going away, company buyouts, changing technology, along with other factors. In an age of downsizing

  14. Outfits - Company A - 66 

    E-Print Network [OSTI]

    Unknown

    2006-01-01

    through ?energy source? principle ................................................................................... 73 Figure 28: Combining battery placement into cart and battery plug in by utilizing metallic connection prongs, remove user plug... configuration of an electric motor with batteries and solar panel derived from the ?energy source? principle and automatic energy source checklist ............................................................................................................. 84...

  15. Dynein Motor Domain Shows Ring-Shaped Motor, Buttress

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to life. It takes place even at the cellular level where cargo is continually being transported by motor proteins. These tiny machines convert the energy gained from...

  16. Dynein Motor Domain Shows Ring-Shaped Motor, Buttress

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    even at the cellular level where cargo is continually being transported by motor proteins. These tiny machines convert the energy gained from hydrolysing ATP into a series of...

  17. Feasibility Study Company Description

    E-Print Network [OSTI]

    Dahl, David B.

    Feasibility Study Company Description: The ZZZZZ Office works with start-ups and established...realized with more than 15,000 employees. Short Project Name: Migrate small waste treatment system from Latin America houses which are built in areas where there is no sewer drain line. In order to covert black waters

  18. Motor Gasoline Assessment, Spring 1997

    Reports and Publications (EIA)

    1997-01-01

    Analyzes the factors causing the run up of motor gasoline prices during spring 1996 and the different market conditions during spring 1997 that caused prices to decline.

  19. How to Build a Motor

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Motor Sign In About | Careers | Contact | Investors | bpa.gov Search News & Us Expand News & Us Projects & Initiatives Expand Projects & Initiatives Finance & Rates Expand...

  20. Die Casting Copper Motor Rotors

    Broader source: Energy.gov [DOE]

    Though it conducts electricity less efficiently than copper, aluminum is the industry’s preferred fabrication material in electric induction motor rotors. Traditional tool steel casting molds...

  1. Company No: 3344784 COMPANIES ACTS 1985 TO 1989

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    have power: 1 As amended by Special Resolution passed on 1 December 2005 2 As amended by written company including any trading subsidiary of the Company establishedfor the purposesof raising funds for the objects of the Company PROVIDED THAT the activities of any such trading subsidiary should

  2. Motors | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsourceII Jump to: navigation, searchsource History ViewMoeOhio:LightNewIndustriesMotors

  3. Stock Analysis with Correlation for Gasoline Companies

    E-Print Network [OSTI]

    Sun, Yi Xin

    2015-01-01

    with Correlation for Gasoline Companies A thesis submittedwith Correlation for Gasoline Companies by Yi Xin Sun Masterstudied to major gasoline companies based in United States.

  4. 3.1. MOTOR SYSTEM 35 3.1 Motor System

    E-Print Network [OSTI]

    Toronto, University of

    3.1. MOTOR SYSTEM 35 3.1 Motor System The motor system comprises the dynamic model of the fish, the actuators, and a set of motor controllers (MCs) which constitutes the motor control center in the artificial consistency, hence realism, and computational efficiency. Our model is rich enough so that we can build motor

  5. No Company Is An Island 

    E-Print Network [OSTI]

    Maddox, A.

    1989-01-01

    No company is an island. Utilities and their industrial customers are discovering that collaboration can breed opportunity while isolation can lead to ruin. Inter company relationships have changed over recent years and HL&P and its customers...

  6. IEMDC IN-LINE ELECTRIC MOTOR DRIVEN COMPRESSOR

    SciTech Connect (OSTI)

    Michael J. Crowley; Prem N. Bansal

    2004-10-01

    This report contains the final project summary and deliverables required by the award for the development of an In-line Electric Motor Driven Compressor (IEMDC). Extensive work was undertaken during the course of the project to develop the motor and the compressor section of the IEMDC unit. Multiple design iterations were performed to design an electric motor for operation in a natural gas environment and to successfully integrate the motor with a compressor. During the project execution, many challenges were successfully overcome in order to achieve the project goals and to maintain the system design integrity. Some of the challenges included limiting the magnitude of the compressor aerodynamic loading for appropriate sizing of the magnetic bearings, achieving a compact motor rotor size to meet the rotor dynamic requirements of API standards, devising a motor cooling scheme using high pressure natural gas, minimizing the impact of cooling on system efficiency, and balancing the system thrust loads for the magnetic thrust bearing. Design methods that were used on the project included validated state-of-the-art techniques such as finite element analysis and computational fluid dynamics along with the combined expertise of both Curtiss-Wright Electro-Mechanical Corporation and Dresser-Rand Company. One of the most significant areas of work undertaken on the project was the development of the unit configuration for the system. Determining the configuration of the unit was a significant step in achieving integration of the electric motor into a totally enclosed compression system. Product review of the IEMDC unit configuration was performed during the course of the development process; this led to an alternate design configuration. The alternate configuration is a modular design with the electric motor and compressor section each being primarily contained in its own pressure containing case. This new concept resolved the previous conflict between the aerodynamic flow passage requirements and electric motor requirements for support and utilities by bounding the flowpath within the compressor section. However most importantly, the benefits delivered by the new design remained the same as those proposed by the goals of the project. In addition, this alternate configuration resulted in the achievement of a few additional advantages over the original concept such as easier maintenance, operation, and installation. Interaction and feedback solicited from target clients regarding the unit configuration supports the fact that the design addresses industry issues regarding accessibility, maintainability, preferred operating practice, and increased reliability.

  7. COMMERICAL MOTOR VEHICLE OPERATOR EMPLOYMENT APPLICATION SUPPLEMENT

    E-Print Network [OSTI]

    Sin, Peter

    COMMERICAL MOTOR VEHICLE OPERATOR EMPLOYMENT APPLICATION SUPPLEMENT _________________________________________________________ Applicants for positions involving the operation of a commercial motor vehicle must comply with Title 49 CFR: _______________ Please list the following information for each unexpired commercial motor vehicle operator license

  8. Developing a Motor Management Policy at BASF 

    E-Print Network [OSTI]

    Zickefoose, B.; Theising, T. R.

    2001-01-01

    In early 1998 Thomas R. Theising, BASF Corporate Engineering initiated the formation of a motor management team. The goal of the team was to develop a Motor Management Guideline to better manage the purchase and repair of motors used throughout...

  9. Determining Electric Motor Load and Efficiency

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DETERMINING ELECTRIC MOTOR LOAD AND EFFICIENCY Most likely your operation's motors account for a large part of your monthly electric bill. Far too often motors are mismatched-or...

  10. 3M's Motor Challenge Showcase Demonstration Project 

    E-Print Network [OSTI]

    Schultz, S. C.

    1996-01-01

    . The Motor Challenge is a U. S. Department of Energy initiative to promote the efficient use of energy in electric motor systems. Showcase Demonstration Projects are used to exemplify the benefits that motor system optimization can provide. This Showcase...

  11. Information Systems Projects Company Description

    E-Print Network [OSTI]

    Dahl, David B.

    from database. Company Description: We have been in business since January, 1970. Family ownedInformation Systems Projects Company Description: We are a successful small business that provides/fixes to our MS Access program. This will allow us to use the program more smoothly, etc. Company Description

  12. Oil and Gas Company Oil and Gas Company Address Place Zip Website

    Open Energy Info (EERE)

    Company Oil and Gas Company Address Place Zip Website Abu Dhabi National Oil Company Abu Dhabi National Oil Company Abu http www adnoc ae default aspx Al Furat Petroleum Company Al...

  13. Magnetically Coupled Adjustable Speed Motor Drives

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    include: * Creation of harmonics, which requires installation of line reactors or harmonic filters * Voltage spikes that can lead to early motor failure * Motor bearing...

  14. Magnetically Coupled Adjustable Speed Motor Drives

    SciTech Connect (OSTI)

    Not Available

    2008-07-01

    This is one in a series of tip sheets to help manufacturers optimize their industrial motor and motor-driven systems.

  15. Turn Motors Off When Not in Use

    SciTech Connect (OSTI)

    Not Available

    2008-07-01

    This is one in a series of tip sheets to help manufacturers optimize their industrial motor and motor-driven systems.

  16. Optimizing Your Motor-Driven System

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and air conditioning (HVAC) systems in many buildings use single or three-phase electrical power controlled by timers and thermostats to drive motors. These motors supply...

  17. Avoid Nuisance Tripping with Premium Efficiency Motors

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Avoid Nuisance Tripping with Premium Efficiency Motors In most cases, upgrading to premium efficiency motors has no noticeable impact on the electrical system. However, in rare...

  18. Energy Management for Motor-Driven Systems

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and to design a motor improvement plan. These actions will help you: Reduce energy costs, Improve motor-driven system reliability and efficiency, Increase productivity,...

  19. Piezoelectric wave motor

    DOE Patents [OSTI]

    Yerganian, Simon Scott (Lee's Summit, MO)

    2001-07-17

    A piezoelectric motor having a stator in which piezoelectric elements are contained in slots formed in the stator transverse to the desired wave motion. When an electric field is imposed on the elements, deformation of the elements imposes a force perpendicular to the sides of the slot, deforming the stator. Appropriate frequency and phase shifting of the electric field will produce a wave in the stator and motion in a rotor. In a preferred aspect, the piezoelectric elements are configured so that deformation of the elements in direction of an imposed electric field, generally referred to as the d.sub.33 direction, is utilized to produce wave motion in the stator. In a further aspect, the elements are compressed into the slots so as to minimize tensile stresses on the elements in use.

  20. Turn Motors Off When Not in Use - Motor Tip Sheet #10

    SciTech Connect (OSTI)

    2008-07-01

    Motors use no energy when turned off. Reducing motor operating time by just 10% usually saves more energy than replacing a standard efficiency motor with a NEMA Premium® efficiency motor. In fact, given that 97% of the life cycle cost of purchasing and operating a motor is energy-related, turning a motor off 10% of the time could reduce energy costs enough to purchase three new motors.

  1. Submersible canned motor mixer pump

    DOE Patents [OSTI]

    Guardiani, R.F.; Pollick, R.D.

    1997-10-07

    A mixer pump is described used in a waste tank for mobilizing high-level radioactive liquid waste having a column assembly containing power cables, a motor housing with electric motor means which includes a stator can of a stator assembly and a rotor can of a rotor assembly, and an impeller assembly with an impeller connected to a shaft of the rotor assembly. The column assembly locates the motor housing with the electric motor means adjacent to the impeller which creates an hydraulic head, and which forces the liquid waste into the motor housing to cool the electric motor means and to lubricate radial and thrust bearing assemblies. Hard-on-hard bearing surfaces of the bearing assemblies and a ring assembly between the impeller and electric motor means act to grind down large particles in the liquid waste flow. These larger particles are received in slots in the static bearing members of the radial bearing assemblies. Only solid waste particles smaller than the clearances in the system can pass there through, thereby resisting damage to and the interruption of the operation of the mixer pump. 10 figs.

  2. Submersible canned motor mixer pump

    DOE Patents [OSTI]

    Guardiani, Richard F. (Ohio Township, PA); Pollick, Richard D. (Sarver, PA)

    1997-01-01

    A mixer pump used in a waste tank for mobilizing high-level radioactive liquid waste having a column assembly containing power cables, a motor housing with electric motor means which includes a stator can of a stator assembly and a rotor can of a rotor assembly, and an impeller assembly with an impeller connected to a shaft of the rotor assembly. The column assembly locates the motor housing with the electric motor means adjacent to the impeller which creates an hydraulic head, and which forces the liquid waste into the motor housing to cool the electric motor means and to lubricate radial and thrust bearing assemblies. Hard-on-hard bearing surfaces of the bearing assemblies and a ring assembly between the impeller and electric motor means act to grind down large particles in the liquid waste flow. These larger particles are received in slots in the static bearing members of the radial bearing assemblies. Only solid waste particles smaller than the clearances in the system can pass therethrough, thereby resisting damage to and the interruption of the operation of the mixer pump.

  3. Advanced Vehicle Testing Activity: High-Percentage Hydrogen/CNG Blend Ford F-150 Operating Summary - January 2003

    SciTech Connect (OSTI)

    Karner, D.; Francfort, J.E.

    2003-01-22

    Over the past two years, Arizona Public Service, a subsidiary of Pinnacle West Capital Corporation, in cooperation with the U.S. Department of Energy's Advanced Vehicle Testing Activity, tested four gaseous fuel vehicles as part of its alternative fueled vehicle fleet. One vehicle operated initially using compressed natural gas (CNG) and later a blend of CNG and hydrogen. Of the other three vehicles, one was fueled with pure hydrogen and two were fueled with a blend of CNG and hydrogen. The three blended-fuel vehicles were originally equipped with either factory CNG engines or factory gasoline engines that were converted to run CNG fuel. The vehicles were variously modified to operate on blended fuel and were tested using 15 to 50% blends of hydrogen (by volume). The pure-hydrogen-fueled vehicle was converted from gasoline fuel to operate on 100% hydrogen. All vehicles were fueled from the Arizona Public Service's Alternative Fuel Pilot Plant, which was developed to dispense gaseous fuels, including CNG, blends of CNG and hydrogen, and pure hydrogen with up to 99.9999% purity. The primary objective of the test was to evaluate the safety and reliability of operating vehicles on hydrogen and blended fuel, and the interface between the vehicles and the hydrogen fueling infrastructure. A secondary objective was to quantify vehicle emissions, cost, and performance. Over a total of 40,000 fleet test miles, no safety issues were found. Also, significant reductions in emissions were achieved by adding hydrogen to the fuel. This report presents the results of 4,695 miles of testing for one of the blended fuel vehicles, a Ford F-150 pickup truck, operating on up to 50% hydrogen-50% CNG fuel.

  4. Advanced Vehicle Testing Activity: Low-Percentage Hydrogen/CNG Blend Ford F-150 Operating Summary - January 2003

    SciTech Connect (OSTI)

    Karner, D.; Francfort, J.E.

    2003-01-22

    Over the past two years, Arizona Public Service, a subsidiary of Pinnacle West Capital Corporation, in cooperation with the U.S. Department of Energy's Advanced Vehicle Testing Activity, tested four gaseous fuel vehicles as part of its alternative fueled vehicle fleet. One vehicle operated initially using compressed natural gas (CNG) and later a blend of CNG and hydrogen. Of the other three vehicles, one was fueled with pure hydrogen and two were fueled with a blend of CNG and hydrogen. The three blended-fuel vehicles were originally equipped with either factory CNG engines or factory gasoline engines that were converted to run CNG fuel. The vehicles were variously modified to operate on blended fuel and were tested using 15 to 50% blends of hydrogen (by volume). The pure-hydrogen-fueled vehicle was converted from gasoline fuel to operate on 100% hydrogen. All vehicles were fueled from the Arizona Public Service's Alternative Fuel Pilot Plant, which was developed to dispense gaseous fuels, including CNG, blends of CNG and hydrogen, and pure hydrogen with up to 99.9999% purity. The primary objective of the test was to evaluate the safety and reliability of operating vehicles on hydrogen and blended hydrogen fuel, and the interface between the vehicles and the hydrogen fueling infrastructure. A secondary objective was to quantify vehicle emissions, cost, and performance. Over a total of 40,000 fleet test miles, no safety issues were found. Also, significant reductions in emissions were achieved by adding hydrogen to the fuel. This report presents results of 16,942 miles of testing for one of the blended fuel vehicles, a Ford F-150 pickup truck, operating on up to 30% hydrogen/70% CNG fuel.

  5. OIT Forest Products Motor Challenge Industry Profile: Motor System...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Paper and Allied Products Industry annually spends 3.6 billion or about 2.6% of its overall operating costs to operate electric motor systems-higher than any other 2- digit...

  6. State observer for synchronous motors

    DOE Patents [OSTI]

    Lang, Jeffrey H. (Waltham, MA)

    1994-03-22

    A state observer driven by measurements of phase voltages and currents for estimating the angular orientation of a rotor of a synchronous motor such as a variable reluctance motor (VRM). Phase voltages and currents are detected and serve as inputs to a state observer. The state observer includes a mathematical model of the electromechanical operation of the synchronous motor. The characteristics of the state observer are selected so that the observer estimates converge to the actual rotor angular orientation and velocity, winding phase flux linkages or currents.

  7. Company Level Imports Archives

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming963 1.969 1.979Coal4Cubic Feet)Cubic1992 Consumption andRobertCompany

  8. Regional companies eye growth

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservation of Fe(II) by Carbon-RichProtonAbout UsRegional companies eye growth Regional

  9. Company Level Imports

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry Natural Gas ReservesAlabamaAboutTotalWhy I Chose EIA#N/A 2010Company

  10. Company Name Company Name Address Place Zip Sector Product Website

    Open Energy Info (EERE)

    operates a number of power stations including the largest coal fired power station in the world as well as the Koeberg nuclear power station Esmeralda Energy Company Esmeralda...

  11. Electric motor for laser-mechanical drilling

    DOE Patents [OSTI]

    Grubb, Daryl L.; Faircloth, Brian O.; Zediker, Mark S.

    2015-07-07

    A high power laser drilling system utilizing an electric motor laser bottom hole assembly. A high power laser beam travels within the electric motor for advancing a borehole. High power laser drilling system includes a down hole electrical motor having a hollow rotor for conveying a high power laser beam through the electrical motor.

  12. Torquespeed relationship of the bacterial flagellar motor

    E-Print Network [OSTI]

    Oster, George

    Torque­speed relationship of the bacterial flagellar motor Jianhua Xing* , Fan Bai , Richard Berry swimming bacteria are propelled by flagellar filaments driven by a rotary motor. Each of these tiny motors can generate an impressive torque. The motor torque vs. speed relationship is considered one

  13. Rotary protein motors George Oster1

    E-Print Network [OSTI]

    Oster, George

    unambiguously iden- tified as rotary engines: the bacterial flagellar motor and the two motors that constituteRotary protein motors George Oster1 and Hongyun Wang2 1 Depts Molecular and Cellular Biology review the current understanding of how these protein motors convert their energy supply into a rotary

  14. Motor Cortex Is Required for Learning but Not for Executing a Motor Skill

    E-Print Network [OSTI]

    Olveczky, Bence

    Article Motor Cortex Is Required for Learning but Not for Executing a Motor Skill Highlights d We train rats to execute spatiotemporally precise task- specific motor sequences d We show that motor cortex is not required for executing the learned skills d Motor cortex, however, is essential

  15. Rotary Electrodynamics of a DC Motor: Motor as Mechanical Capacitor Lab 2: Modeling and System Identification

    E-Print Network [OSTI]

    Rm La im + - vm vin 0 V Jm m m Kg : 1 gm gm g g J m = shaft + gm Motor shaft inertia shaft = Jm m by the motor to its rotational output shaft. · m is the angular speed (i.e., derivative of the motor shaft's angular position m) of the motor's output shaft rotations. · Jm is the rotational inertia of the motor

  16. Recover Power with Hydraulic Motors 

    E-Print Network [OSTI]

    Brennan, J. R.

    1982-01-01

    Anywhere liquid pressure is reduced across a throttling device, there is a potential application for a hydraulic power recovery motor (HPRM). Cost of power makes HPRM's attractive with recoveries as small as 25 hp on a continuous basis. When...

  17. MOTOR POOL RESERVATIONS Reservation Number:_______________

    E-Print Network [OSTI]

    Ottino, Julio M.

    of Department Chair or Organization Advisor: ________________________________________ Chart String Number: Fund: ______________________________________________________________________ Name of Department or Organization: _____________________________________________________ Name reservations require the "Organization Authorization for University Vehicles" form to be faxed to Motor Pool

  18. Direct drive field actuator motors

    DOE Patents [OSTI]

    Grahn, Allen R. (Salt Lake City, UT)

    1998-01-01

    A positive-drive field actuator motor including a stator carrying at least one field actuator which changes in dimension responsive to application of an energy field, and at least one drive shoe movable by the dimensional changes of the field actuator to contact and move a rotor element with respect to the stator. Various embodiments of the motor are disclosed, and the rotor element may be moved linearly or arcuately.

  19. Direct drive field actuator motors

    DOE Patents [OSTI]

    Grahn, A.R.

    1998-03-10

    A positive-drive field actuator motor is described which includes a stator carrying at least one field actuator which changes in dimension responsive to application of an energy field, and at least one drive shoe movable by the dimensional changes of the field actuator to contact and move a rotor element with respect to the stator. Various embodiments of the motor are disclosed, and the rotor element may be moved linearly or arcuately. 62 figs.

  20. Motor Systems | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURING OFFICESpecialAPPENDIX F WetlandsofOpen-AccessMotor Systems Motor Systems Dramatic

  1. A Novel Approach to Determining Motor Load 

    E-Print Network [OSTI]

    Brown, M.

    1992-01-01

    TO DETERMINING MOTOR LOAD by Michael Brown Georgia Tech Research Institute Atlanta, Georgia ABSTRACf Properly sized electric motors are essential if industrial plant efficiency is to be optimized and energy costs minimized. Because of the difficully..., oversizing is usually unwarranted and ultimately leads to ineffi-eiency and energy waste. This paper ex.amines methods to determine underloaded motor operdtion and presents an evaluation of the savings afforded by properly sizing of motors. MOTOR...

  2. Magnetic tweezers to studyMagnetic tweezers to studyMagnetic tweezers to studyMagnetic tweezers to study DNA motorsDNA motorsDNA motorsDNA motors

    E-Print Network [OSTI]

    Ritort, Felix

    to study DNA motorsDNA motorsDNA motorsDNA motors MariaMariaMariaMaria MañosasMañosasMañosasMañosas Ritort) · Applications: 1. Tracking DNA motors: (i) Helicases (ii) Annealing motor 2. Studying a multiprotein system: DNA hexamers (Dong et al, JBC 1995) Tracking DNA motors: (i) Helicases #12;Passive: helicase behaves

  3. Improve Motor Operation at Off-Design Voltages - Motor Tip Sheet #9

    SciTech Connect (OSTI)

    2008-07-01

    Motors are designed to operate within +/- 10% of their nameplate rated voltages. When motors operate at conditions of over- or under-voltage, motor efficiency and other performance parameters are degraded.

  4. Friction Stir Welding of Lightweight Vehicle Structures: Final Report

    SciTech Connect (OSTI)

    Sanella, M L

    2008-08-31

    The purpose of this Cooperative Research and Development Agreement (CRADA) between UTBattelle, LLC and Ford Motor Company was to establish friction stir welding (FSW) and friction stir processing as viable options for use in construction of lightweight substructures for trucks and cars, including engine cradles, suspension sub frames, instrument panel supports, and intake manifolds.

  5. SCANNING THE TECHNOLOGY Scanning Advanced

    E-Print Network [OSTI]

    , electronics and software technologies as shown in Fig. 2. A coarse history of the automobile reveals the broadSCANNING THE TECHNOLOGY Scanning Advanced Automobile Technology BY HAMID GHARAVI National Institute of Standards and Technology Guest Editor K. VENKATESH PRASAD Ford Motor Company Guest Editor PETROS IOANNOU

  6. Lesson Summary Students will learn about a mitigation process

    E-Print Network [OSTI]

    Mojzsis, Stephen J.

    -Offs The Designed World Energy Sources and Uses NSES Science Standards Unifying Concepts and Processes Systems The Carbon Mitigation Initiative is a joint project of Princeton University, BP, and Ford Motor Company of atmospheric carbon dioxide over pre-industrial levels. The following pages contain: · An introduction

  7. ELASTIC-PLASTIC MODE-II FRACTURE OF ADHESIVE JOINTS

    E-Print Network [OSTI]

    Thouless, Michael

    & Engineering University of Michigan, Ann Arbor, MI 48109 3 Scientific Research Laboratories Ford Motor Company materials by a third phase is of long-standing interest in a variety of industrial and technological which account for plasticity in the surrounding materials, the energy dissipated by plasticity can

  8. FUNDAMENTAL STRUCTURAL LIMITATIONS OF AN INDUSTRIAL ENERGY MANAGEMENT CONTROLLER ARCHITECTURE FOR HYBRID VEHICLES

    E-Print Network [OSTI]

    Grizzle, Jessy W.

    FUNDAMENTAL STRUCTURAL LIMITATIONS OF AN INDUSTRIAL ENERGY MANAGEMENT CONTROLLER ARCHITECTURE, Michigan 48109-2125 Email: dopila@umich.edu Xiaoyong Wang Ryan McGee Ford Motor Company Dearborn, Michigan-2122 ABSTRACT Energy management controllers for hybrid electric vehicles typically contain numerous parameters

  9. Career Opportunities & Employer Relations 2012 2013 Stats

    E-Print Network [OSTI]

    Missouri-Rolla, University of

    -Wehmiller DG Ford Motor Company #12;6 Intern Barrick Gold of North America Cerner Corporation* Garmin* ADTRAN* ArcelorMittal Consol Energy Peabody Energy Procter & Gamble Co-op Anheuser-Busch Ameren Synergetic Industries True Manufacturing Nucor Steel Hunter Engineering Parker Hannafin ­ Sporlan Division

  10. Visual Localization in Fused Image and Laser Range Data Nicholas Carlevaris-Bianco, Anush Mohan

    E-Print Network [OSTI]

    Eustice, Ryan

    of the capabilities of advanced autonomous vehicles to much lower cost instrumented camera systems. Our method: {carlevar,anushm}@umich.edu James R. McBride Research and Innovation Center Ford Motor Company Dearborn autonomously in their environment. Unfortunately, such a sensor suite costs hundreds of thousands of US dollars

  11. A computing strategyfor applicationsinvolving offsets,sweeps,and Minkowski operations

    E-Print Network [OSTI]

    Suresh, Krishnan

    .E.Hartquista,J.P.Menonb,K. Sureshc,H.B. Voe1ckera.*,1.Zagajacd "The Sibley School of Mechanical and Aero Engineering, Cornell,Ford Motor Company, Dearborn, MI, USA Received 29 June 1998; accepted 24 September 1998 Abstract Offsets

  12. Reconfiguring a Remanufacturing Line at Visteon, Mexico

    E-Print Network [OSTI]

    Swaminathan, Jayashankar M.

    .) Visteon is a major supplier of integrated auto- motive systems, including power-train control, chassis, and electronics, to Ford Motor Company. Increasing competition and rapidly evolving tech- nologies and market reman) for transforming used units (cores) into refurbished units that satisfy exactly the same quality

  13. An Information Theoretic Framework for Camera and Lidar Sensor Data Fusion and its Applications in

    E-Print Network [OSTI]

    Eustice, Ryan

    and discuss any problem. He always made sure that I am making progress and always guided me towards the right, besides research. Finally, I would like to thank my family who supported me unconditionally from the time achieve this milestone. Funding This work is supported through grants from the Ford Motor Company via

  14. A METHOD TO RELATE PRODUCT TOLERANCING DECISIONS TO ENVIRONMENTAL IMPACTS AND COSTS IN

    E-Print Network [OSTI]

    the support from Ford Motor Company, and for giving me the opportunity to work as a summer intern, and John Smart for their assistance on the study of transmission gearing. I would like to thank my family ..............................................................................................1 1.2 Overview of the Problem............................................

  15. Submersible canned motor transfer pump

    DOE Patents [OSTI]

    Guardiani, R.F.; Pollick, R.D.; Nyilas, C.P.; Denmeade, T.J.

    1997-08-19

    A transfer pump is described which is used in a waste tank for transferring high-level radioactive liquid waste from a waste tank and having a column assembly, a canned electric motor means, and an impeller assembly with an upper impeller and a lower impeller connected to a shaft of a rotor assembly. The column assembly locates a motor housing with the electric motor means adjacent to the impeller assembly which creates an hydraulic head, and which forces the liquid waste, into the motor housing to cool the electric motor means and to cool and/or lubricate the radial and thrust bearing assemblies. Hard-on-hard bearing surfaces of the bearing assemblies and a ring assembly between the upper impeller and electric motor means grind large particles in the liquid waste flow. Slots in the static bearing member of the radial bearing assemblies further grind down the solid waste particles so that only particles smaller than the clearances in the system can pass there through, thereby resisting damage to and the interruption of the operation of the transfer pump. The column assembly is modular so that sections can be easily assembled, disassembled and/or removed. A second embodiment employs a stator jacket which provides an alternate means for cooling the electric motor means and lubricating and/or cooling the bearing assemblies, and a third embodiment employs a variable level suction device which allows liquid waste to be drawn into the transfer pump from varying and discrete levels in the waste tank. 17 figs.

  16. Industry Analysis and Customer Segmentation Company Description

    E-Print Network [OSTI]

    Dahl, David B.

    : A leading health care company, serving more than 75 million people worldwide. Our family of companiesIndustry Analysis and Customer Segmentation Company Description: Our company specializes will research geographic market share by brand/company. The final deliverable will be a prioritized list

  17. Real Estate Development Company Description

    E-Print Network [OSTI]

    Dahl, David B.

    Real Estate Development Company Description: The largest specialty family footwear retailer America, the Caribbean and South America. Short Project Name: Competitive Analysis - Real Estate Positions to assist them in making recommendations for how our company should develop its real estate strategy

  18. Capital Markets Finance Company Description

    E-Print Network [OSTI]

    Dahl, David B.

    quantitative and qualitative evidence to support your recommendation The first half of the semester. The team will perform a company-by-company analysis of industry participants (qualitative and quantitative-15 slide powerpoint presentation that highlights industry dynamics and a clear and unique investment thesis

  19. Assessing the Energy Efficiency Potential of Industrial Motor Systems

    E-Print Network [OSTI]

    McKane, Aimee

    2014-01-01

    2003. Energy-efficient motor systems in the industrial andpotential for energy efficiency in industrial motor systemspotential for energy efficiency in industrial motor systems

  20. Selected Bibliography on Electric Motor Repair | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Selected Bibliography on Electric Motor Repair Selected Bibliography on Electric Motor Repair The following series of repair documents related to electric motors were produced by...

  1. Sensor Network for Motor Energy Management | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Sensor Network for Motor Energy Management Sensor Network for Motor Energy Management Remote Sensing Electric Motor Operation Optimizes Maintenance and Energy Efficiency Electric...

  2. Functional Magnetic Resonance Imaging of Motor Cortex Activation in Schizophrenia

    E-Print Network [OSTI]

    2015-01-01

    Magnetic Resonance Imaging of Motor Cortex Activation inBrain dysfunction during motor activation and corpus callo-Lee HJ, et al. • FMRI of Motor Cortex Activation in

  3. Lab 4 -Motor Constants and Sensor Calibration Consider a DC servo motor which is connected to a power supply. The motor inertia is Jm. The rotational

    E-Print Network [OSTI]

    Stanford University

    Lab 4 - Motor Constants and Sensor Calibration PRE-LAB Consider a DC servo motor which is connected to a power supply. The motor inertia is Jm. The rotational damping in the motor is bm. The motor produces a torque Tm = Kmi where Km is the motor's torque constant and i is the current from the power supply. a

  4. Three phase AC motor controller

    DOE Patents [OSTI]

    Vuckovich, Michael (Elizabeth, PA); Wright, Maynard K. (Bethel Park, PA); Burkett, John P. (South Huntington Township, Westmoreland County, PA)

    1984-03-20

    A motor controller for a three phase AC motor (10) which is adapted to operate bidirectionally from signals received either from a computer (30) or a manual control (32). The controller is comprised of digital logic circuit means which implement a forward and reverse command signal channel (27, 29) for the application of power through the forward and reverse power switching relays (16, 18, 20, 22). The digital logic elements are cross coupled to prevent activation of both channels simultaneously and each includes a plugging circuit (65, 67) for stopping the motor upon the removal of control signal applied to one of the two channels (27, 29) for a direction of rotation desired. Each plugging circuit (65, 67) includes a one-shot pulse signal generator (88, 102) which outputs a single pulse signal of predetermined pulsewidth which is adapted to inhibit further operation of the application of power in the channel which is being activated and to apply a reversal command signal to the other channel which provides a reversed phase application of power to the motor for a period defined by the pulse-width output of the one-shot signal generator to plug the motor (10) which will then be inoperative until another rotational command signal is applied to either of the two channels.

  5. Dynein Motor Domain Shows Ring-Shaped Motor, Buttress

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalentLaboratory |Sectorfor $1.14Dynein Motor DomainDynein Motor

  6. DYNAMICS OF FUNCTIONAL CONNECTIVITY WITHIN CORTICAL MOTOR NETWORK DURING MOTOR LEARNING IN STROKE - CORRELATIONS WITH "TRUE" MOTOR RECOVERY

    E-Print Network [OSTI]

    BANI-AHMED, ALI

    2013-08-31

    investigate the changes in cortical motor function at two levels, regional (micro-circuitry, regional activation) and network (macro-circuitry, functional connectivity), following an arm-focused motor training in chronic stroke survivors and how these brain...

  7. Saving Energy at Ford 

    E-Print Network [OSTI]

    McReynolds, C. J.

    1986-01-01

    effectively to save energy and reduce energy costs in our manufacturing operations. As a result, we are in a position to speak about successful industrial conservation practices that have worked for us over the last decade. Fuel Switching For a time... equipment. Ensure air-drying equipment is effective. Avoid continuously blowing off moisture through open valves -- it is a gross energy-waster, overloads the compressor, reducing effective oil and water removal and causes excessive pressure drop...

  8. FORD | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergy A plug-inPPLfor InnovativeProcessing22,673,list7.pdf

  9. ARTI/MCRL Project Report products of motor burnout (Second quarter report)

    SciTech Connect (OSTI)

    Hawley-Fedder, R.

    1995-01-15

    The OSP (Operating Safety Procedure) required for performance of electrical arc testing of CFC replacement fluids was renewed. Electrical breakdown tests at one (1) atmosphere pressure have been performed for R-22, R-134a, and R-125/R-143a (50:50 blend; AZ-50), and breakdown products identified. No differences in HCFC breakdown products are seen in the presence or absence of lubricant oils. The design of the high pressure-high temperature test stand has been finalized, and construction initiated during this quarter. Three motor stators and rotors were received from Tecumseh Products Company for use in motor burnout tests. A test plan for the motor breakdown tests is in preparation.

  10. Homopolar motor with dual rotors

    DOE Patents [OSTI]

    Hsu, J.S.

    1998-12-01

    A homopolar motor has a field rotor mounted on a frame for rotation in a first rotational direction and for producing an electromagnetic field, and an armature rotor mounted for rotation on said frame within said electromagnetic field and in a second rotational direction counter to said first rotational direction of said field rotor. The two rotors are coupled through a 1:1 gearing mechanism, so as to travel at the same speed but in opposite directions. This doubles the output voltage and output power, as compared to a motor in which only the armature is rotated. Several embodiments are disclosed. 7 figs.

  11. Thermoelectric generator for motor vehicle

    DOE Patents [OSTI]

    Bass, John C. (6121 La Pintra Dr., La Jolla, CA 92037)

    1997-04-29

    A thermoelectric generator for producing electric power for a motor vehicle from the heat of the exhaust gasses produced by the engine of the motor vehicle. The exhaust gasses pass through a finned heat transfer support structure which has seat positions on its outside surface for the positioning of thermoelectric modules. A good contact cylinder provides a framework from which a spring force can be applied to the thermoelectric modules to hold them in good contact on their seats on the surface of the heat transfer support structure.

  12. Efficient, Inexpensive Motors: A New Trend in The Motors Market 

    E-Print Network [OSTI]

    Wroblewksi, R. G.

    2001-01-01

    criteria ABB 0 100Baldor GE 50 83 Part of Marathon Grainger!Dayton Leeson Lincoln 81 67 46 78 12 24 51 60 67 62 54 Magnetek Marathon Reliance Siemens Sterling Tatung Teco/Westinghouse Toshiba U.S. Motors WEG Table 3 is a list...

  13. Motor Energy Saving Opportunities in an Industrial Plant 

    E-Print Network [OSTI]

    Kumar, B.; Elwell, A.

    1999-01-01

    Industrial plants have enormous energy saving opportunities with electric motors. Improving motor efficiency is a conventional wisdom to save energy. Re-engineering affords far greater savings opportunities than motor efficiency improvement. Motor...

  14. Writing Motor Specifications - How to Include Efficiency 

    E-Print Network [OSTI]

    Quartermaine, B. J.

    1980-01-01

    The escalating cost of electric power coupled with the rapid depletion of our non-renewable resources makes consideration of motor efficiency good sense both from economic and conservation viewpoints. The efficiency of an electric motor can...

  15. Impact of Motor Failures on Payback Periods 

    E-Print Network [OSTI]

    Cheek, K. F.; Pillay, P.; Dudley, K. J.

    1995-01-01

    This paper uses MotorMaster and Vaughen's Complete Price Guide to determine payback periods for different motor failure scenarios. Some scenarios considered are rewinds, reconditions, and replacement of bearings. Prices for these repairs...

  16. Sensorless performance evaluation of induction motors 

    E-Print Network [OSTI]

    Ahmed, Shehab

    2000-01-01

    In this thesis, various aspects of induction motor performance are discussed. The importance of the speed-torque curve for an induction motor system and its various applications are emphasized. Difficulties in the presently available methods...

  17. Learning Motor Skills: From Algorithms to Robot

    E-Print Network [OSTI]

    Learning Motor Skills: From Algorithms to Robot Experiments Erlernen Motorischer Fähigkeiten: Von Algorithmen zu Roboter-Experimenten Zur Erlangung des akademischen Grades Doktor-Ingenieur (Dr Motor Skills: From Algorithms to Robot Experiments Erlernen Motorischer Fähigkeiten: Von Algorithmen zu

  18. Self-bearing motor design & control

    E-Print Network [OSTI]

    Imani Nejad, Mohammad

    2013-01-01

    This thesis presents the design, implementation and control of a new class of self-bearing motors. The primary thesis contributions include the design and experimental demonstration of hysteresis self-bearing motors, novel ...

  19. Replacing an Oversized and Underloaded Electric Motor

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    interpolation between a motor's full- and half-load current values. The modified equation, useful for estimating loads in the 50% to full-load range, is: Motor Load 0.5 +...

  20. 3M's Motor Challenge Showcase Demonstration Project 

    E-Print Network [OSTI]

    Schultz, S. C.

    1998-01-01

    Challenge is a U.S. Department of Energy initiative to promote the efficient use of energy in electric motor systems. Showcase Demonstration Projects are used to exemplify the benefits that motor system optimization can provide. This Showcase Project...

  1. Frequency modulation drive for a piezoelectric motor

    DOE Patents [OSTI]

    Mittas, Anthony (Albuquerque, NM)

    2001-01-01

    A piezoelectric motor has peak performance at a specific frequency f.sub.1 that may vary over a range of frequencies. A drive system is disclosed for operating such a motor at peak performance without feedback. The drive system consists of the motor and an ac source connected to power the motor, the ac source repeatedly generating a frequency over a range from f.sub.1 -.DELTA.x to f.sub.1 +.DELTA.y.

  2. Motorized control for mirror mount apparatus

    DOE Patents [OSTI]

    Cutburth, Ronald W. (Tracy, CA)

    1989-01-01

    A motorized control and automatic braking system for adjusting mirror mount apparatus is disclosed. The motor control includes a planetary gear arrangement to provide improved pitch adjustment capability while permitting a small packaged design. The motor control for mirror mount adjustment is suitable for laser beam propagation applications. The brake is a system of constant contact, floating detents which engage the planetary gear at selected between-teeth increments to stop rotation instantaneously when the drive motor stops.

  3. Using MotorMaster to Track Motor Inventory and Analyze Purchasing Decisions 

    E-Print Network [OSTI]

    Brown, M.; Meffort, W.

    2007-01-01

    MotorMaster 4.0 can be a useful software package for electric motor management decisions in industrial facilities. To be successful, the MotorMaster database must be populated with detailed motor nameplate information. Georgia Tech worked with a...

  4. Conducting a Motor Survey: Key Step for Establishing a Motor Management Policy 

    E-Print Network [OSTI]

    Miller, R. B.

    2002-01-01

    Roughly 70% of the energy consumed by manufacturing processes is used by electric motors. According to the U.S. Department of Energy, greater attention to motor systems management can reduce motor-related energy costs by 18%. Establishing a motor...

  5. Coupling between motor proteins determines dynamic behaviors of motor protein assemblies

    E-Print Network [OSTI]

    Coupling between motor proteins determines dynamic behaviors of motor protein assemblies Jonathan W of intracellular cargos by multiple microtubule motor proteins is believed to be a common and significant phenomenon in vivo, yet signatures of the microscopic dynamics of multiple motor systems are only now

  6. Data Needs for Evolving Motor Vehicle Emission Modeling Approaches

    E-Print Network [OSTI]

    Guensler, Randall

    1993-01-01

    Agency; Highway Vehicle Emission Estimates; Office offor Evolving Motor Vehicle Emission Modeling Approachesfor Evolving Motor Vehicle Emission Modeling Approaches

  7. Deere & Company Energy Management Program 

    E-Print Network [OSTI]

    Darby, D. F.

    1981-01-01

    An overview of the Deere & Company Energy Management Program is discussed. A review is made of seven key elements which have contributed to the success of the program. Installed projects and established programs are identified and discussed...

  8. How companies can leverage crowdsourcing

    E-Print Network [OSTI]

    Cheung, Sunny

    2012-01-01

    Crowdsourcing is an increasingly popular phenomenon where companies solicit the help of the public in helping accomplish some of the activities commonly performed by employees or contractors. These activities can range ...

  9. The valuation of construction companies

    E-Print Network [OSTI]

    Sassine, Edmond, 1980-

    2004-01-01

    The main objective of this thesis is to study the valuation of construction companies in mergers and acquisitions. The thesis is divided into three main parts; Mergers and Acquisitions, Valuation, and a Case Study. Mergers ...

  10. Electric Motor What happens if we put

    E-Print Network [OSTI]

    Bertulani, Carlos A. - Department of Physics and Astronomy, Texas A&M University

    Electric Motor What happens if we put a loop of wire carrying a current in a B field ? FB on opposite sides of the loop produce a torque on the loop causing it to rotate. Electric motor ­ a commutator. #12;Electric Motor Define normal n to plane using right-hand rule Torque tends to rotate loop to align

  11. Lithographically Patterned Channels Spatially Segregate Kinesin Motor

    E-Print Network [OSTI]

    Hancock, William O.

    Lithographically Patterned Channels Spatially Segregate Kinesin Motor Activity and Effectively Received March 25, 2003 ABSTRACT To extract useful work from biological motor proteins, it is necessary microfabrication to construct 1.5-µm-deep channels in SU-8 photoresist patterned on glass. Although motor proteins

  12. INDUCTION MOTOR FAULT DIAGNOSTIC AND MONITORING METHODS

    E-Print Network [OSTI]

    Povinelli, Richard J.

    INDUCTION MOTOR FAULT DIAGNOSTIC AND MONITORING METHODS by Aderiano M. da Silva, B.S. A Thesis;i Abstract Induction motors are used worldwide as the "workhorse" in industrial applications material. However, induction motor faults can be detected in an initial stage in order to prevent

  13. General Motors Clean Combustion Engines Advanced

    E-Print Network [OSTI]

    Siefert, Chris

    General Motors Clean Combustion Engines Advanced with Predictive Simulation Tools Sandia National Laboratories (SNL) has been working with General Motors (GM) for over 30 years. In the last few years General Motors n Daniel Dedrick, an SNL researcher, handles a complex metal hydride within an inert

  14. Microtubule Motors in Microfluidics Maruti Uppalapati,

    E-Print Network [OSTI]

    Hancock, William O.

    CHAPTER 1 3 Microtubule Motors in Microfluidics Maruti Uppalapati, 1 Ying-Ming Huang, 2 Shankar-mail: wohbio@engr.psu.edu 311 Abstract Kinesin motor proteins carry out a range of transport functions that successfully integrates microtubule-based transport. Key terms kinesin microtubule transport motor protein

  15. City of Sacramento Video (Text Version)

    Broader source: Energy.gov [DOE]

    Narrator: Scooter the Spare the Air mascot would like to thank Folsom Lake Ford for letting him test out a new Ford Fusion. The Fusion is made by Ford but did you know that all major auto companies...

  16. Method and apparatus for monitoring motor operated valve motor output torque and power at valve seating

    DOE Patents [OSTI]

    Casada, Donald A. (Oak Ridge, TN)

    1996-01-01

    A method and apparatus are provided for monitoring a motor operated valve during the brief period when the valve seats and the torque switch trips to deenergize the valve motor. The method uses voltage measurements on the load side of a deenergizing switch that opens to deenergize the motor to determine, among other things, final motor rotational speed and the decelerating torque at motor deenergization.

  17. Method and apparatus for monitoring motor operated valve motor output torque and power at valve seating

    DOE Patents [OSTI]

    Casada, D.A.

    1996-01-16

    A method and apparatus are provided for monitoring a motor operated valve during the brief period when the valve seats and the torque switch trips to deenergize the valve motor. The method uses voltage measurements on the load side of a deenergizing switch that opens to deenergize the motor to determine, among other things, final motor rotational speed and the decelerating torque at motor deenergization. 14 figs.

  18. Eastern Kodak Company

    SciTech Connect (OSTI)

    Y.S. Tyan

    2009-06-30

    Lighting consumes more than 20% of electricity generated in the United States. Solid state lighting relies upon either inorganic or organic light-emitting diodes (OLEDs). OLED devices because of their thinness, fast response, excellent color, and efficiency could become the technology of choice for future lighting applications, provided progress is made to increase power efficiency and device lifetime and to develop cost-effective manufacturing processes. As a first step in this process, Eastman Kodak Company has demonstrated an OLED device architecture having an efficacy over 50 lm/W that exceeds the specifications of DOE Energy Star Program Requirements for Solid State Lighting. The project included work designed to optimize an OLED device, based on a stacked-OLED structure, with performance parameters of: low voltage; improved light extraction efficiency; improved internal quantum efficiency; and acceptable lifetime. The stated goal for the end of the project was delivery of an OLED device architecture, suitable for development into successful commercial products, having over 50 lum/W power efficiency and 10,000 hours lifetime at 1000 cd/m{sup 2}. During the project, Kodak developed and tested a tandem hybrid IES device made with a fluorescent blue emitter, a phosphorescent yellow emitter, and a phosphorescent red emitter in a stacked structure. The challenge was to find low voltage materials that do not absorb excessive amounts of emitted light when the extraction enhancement structure is applied. Because an extraction enhancement structure forces the emitted light to travel several times through the OLED layers before it is emitted, it exacerbates the absorption loss. A variety of ETL and HTL materials was investigated for application in the low voltage SSL device structure. Several of the materials were found to successfully yield low operating device voltages without incurring excessive absorption loss when the extraction enhancement structure was applied. An internal extraction layer comprises two essential components: a light extraction element (LEE) that does the actual extraction of emitted light and a light coupling layer (LCL) that allows the emitted light to interact with the extraction element. Modeling results show that the optical index of the LCL needs to be high, preferably higher than that of the organic layers with an n value of {approx}1.8. In addition, since the OLED structure needs to be built on top of it the LCL needs to be physically and chemically benign. As the project concluded, our focus was on the tandem hybrid device, which proved to be the more efficient architecture. Cost-efficient device fabrication will provide the next challenges with this device architecture in order to allow this architecture to be commercialized.

  19. Motor protein accumulation on antiparallel microtubule overlaps

    E-Print Network [OSTI]

    Hui-Shun Kuan; M. D. Betterton

    2015-09-24

    Biopolymers serve as one-dimensional tracks on which motor proteins move to perform their biological roles. Motor protein phenomena have inspired theoretical models of one-dimensional transport, crowding, and jamming. Experiments studying the motion of Xklp1 motors on reconstituted antiparallel microtubule overlaps demonstrated that motors recruited to the overlap walk toward the plus end of individual microtubules and frequently switch between filaments. We study a model of this system that couples the totally asymmetric simple exclusion process (TASEP) for motor motion with switches between antiparallel filaments and binding kinetics. We determine steady-state motor density profiles for fixed-length overlaps using exact and approximate solutions of the continuum differential equations and compare to kinetic Monte Carlo simulations. The center region, far from the overlap ends, has a constant motor density as one would na\\"ively expect. However, rather than following a simple binding equilibrium, the center motor density depends on total overlap length, motor speed, and motor switching rate. The size of the crowded boundary layer near the overlap ends is also dependent on the overlap length and switching rate in addition to the motor speed and bulk concentration. The antiparallel microtubule overlap geometry may offer a novel mechanism for biological regulation of protein concentration and consequent activity.

  20. Chemistry in Motion: Tiny Synthetic Motors

    E-Print Network [OSTI]

    Peter H. Colberg; Shang Yik Reigh; Bryan Robertson; Raymond Kapral

    2014-11-03

    In this Account, we describe how synthetic motors that operate by self-diffusiophoresis make use of a self-generated concentration gradient to drive motor motion. A description of propulsion by self-diffusiophoresis is presented for Janus particle motors comprising catalytic and noncatalytic faces. The properties of the dynamics of chemically powered motors are illustrated by presenting the results of particle-based simulations of sphere-dimer motors constructed from linked catalytic and noncatalytic spheres. The geometries of both Janus and sphere-dimer motors with asymmetric catalytic activity support the formation of concentration gradients around the motors. Because directed motion can occur only when the system is not in equilibrium, the nature of the environment and the role it plays in motor dynamics are described. Rotational Brownian motion also acts to limit directed motion, and it has especially strong effects for very small motors. We address the following question: how small can motors be and still exhibit effects due to propulsion, even if only to enhance diffusion? Synthetic motors have the potential to transform the manner in which chemical dynamical processes are carried out for a wide range of applications.

  1. Motor protein accumulation on antiparallel microtubule overlaps

    E-Print Network [OSTI]

    Kuan, Hui-Shun

    2015-01-01

    Biopolymers serve as one-dimensional tracks on which motor proteins move to perform their biological roles. Motor protein phenomena have inspired theoretical models of one-dimensional transport, crowding, and jamming. Experiments studying the motion of Xklp1 motors on reconstituted antiparallel microtubule overlaps demonstrated that motors recruited to the overlap walk toward the plus end of individual microtubules and frequently switch between filaments. We study a model of this system that couples the totally asymmetric simple exclusion process (TASEP) for motor motion with switches between antiparallel filaments and binding kinetics. We determine steady-state motor density profiles for fixed-length overlaps using exact and approximate solutions of the continuum differential equations and compare to kinetic Monte Carlo simulations. The center region, far from the overlap ends, has a constant motor density as one would na\\"ively expect. However, rather than following a simple binding equilibrium, the center ...

  2. Traffic by small teams of molecular motors

    E-Print Network [OSTI]

    Melanie J. I. Müller; Janina Beeg; Rumiana Dimova; Stefan Klumpp; Reinhard Lipowsky

    2008-07-07

    Molecular motors transport various cargos along cytoskeletal filaments, analogous to trucks on roads. In contrast to vehicles, however, molecular motors do not work alone but in small teams. We describe a simple model for the transport of a cargo by one team of motors and by two teams of motors, which walk into opposite directions. The cooperation of one team of motors generates long-range transport, which we observed experimentally in vitro. Transport by two teams of motors leads to a variety of bidirectional motility behaviour and to dynamic instabilities reminiscent of spontaneous symmetry breaking. We also discuss how cargo transport by teams of motors allows the cell to generate robust long-range bidirectional transport.

  3. System and method for motor speed estimation of an electric motor

    DOE Patents [OSTI]

    Lu, Bin (Kenosha, WI); Yan, Ting (Brookfield, WI); Luebke, Charles John (Sussex, WI); Sharma, Santosh Kumar (Viman Nagar, IN)

    2012-06-19

    A system and method for a motor management system includes a computer readable storage medium and a processing unit. The processing unit configured to determine a voltage value of a voltage input to an alternating current (AC) motor, determine a frequency value of at least one of a voltage input and a current input to the AC motor, determine a load value from the AC motor, and access a set of motor nameplate data, where the set of motor nameplate data includes a rated power, a rated speed, a rated frequency, and a rated voltage of the AC motor. The processing unit is also configured to estimate a motor speed based on the voltage value, the frequency value, the load value, and the set of nameplate data and also store the motor speed on the computer readable storage medium.

  4. Reduced vibration motor winding arrangement

    DOE Patents [OSTI]

    Slavik, C.J.; Rhudy, R.G.; Bushman, R.E.

    1997-11-11

    An individual phase winding arrangement having a sixty electrical degree phase belt width for use with a three phase motor armature includes a delta connected phase winding portion and a wye connected phase winding portion. Both the delta and wye connected phase winding portions have a thirty electrical degree phase belt width. The delta and wye connected phase winding portions are each formed from a preselected number of individual coils each formed, in turn, from an unequal number of electrical conductor turns in the approximate ratio of {radical}3. The individual coils of the delta and wye connected phase winding portions may either be connected in series or parallel. This arrangement provides an armature winding for a three phase motor which retains the benefits of the widely known and utilized thirty degree phase belt concept, including improved mmf waveform and fundamental distribution factor, with consequent reduced vibrations and improved efficiency. 4 figs.

  5. Reduced vibration motor winding arrangement

    DOE Patents [OSTI]

    Slavik, Charles J. (Rexford, NY); Rhudy, Ralph G. (Scotia, NY); Bushman, Ralph E. (Lathem, NY)

    1997-01-01

    An individual phase winding arrangement having a sixty electrical degree phase belt width for use with a three phase motor armature includes a delta connected phase winding portion and a wye connected phase winding portion. Both the delta and wye connected phase winding portions have a thirty electrical degree phase belt width. The delta and wye connected phase winding portions are each formed from a preselected number of individual coils each formed, in turn, from an unequal number of electrical conductor turns in the approximate ratio of .sqroot.3. The individual coils of the delta and wye connected phase winding portions may either be connected in series or parallel. This arrangement provides an armature winding for a three phase motor which retains the benefits of the widely known and utilized thirty degree phase belt concept, including improved mmf waveform and fundamental distribution factor, with consequent reduced vibrations and improved efficiency.

  6. Electrostatic generator/motor configurations

    DOE Patents [OSTI]

    Post, Richard F

    2014-02-04

    Electrostatic generators/motors designs are provided that generally may include a first cylindrical stator centered about a longitudinal axis; a second cylindrical stator centered about the axis, a first cylindrical rotor centered about the axis and located between the first cylindrical stator and the second cylindrical stator. The first cylindrical stator, the second cylindrical stator and the first cylindrical rotor may be concentrically aligned. A magnetic field having field lines about parallel with the longitudinal axis is provided.

  7. Method for assessing in-service motor efficiency and in-service motor/load efficiency

    DOE Patents [OSTI]

    Kueck, John D. (Oak Ridge, TN); Otaduy, Pedro J. (Oak Ridge, TN)

    1997-01-01

    A method and apparatus for assessing the efficiency of an in-service motor. The operating characteristics of the in-service motor are remotely measured. The operating characteristics are then applied to an equivalent circuit for electrical motors. Finally the equivalent circuit is evaluated to determine the performance characteristics of said in-service motor. Based upon the evaluation an individual is able to determine the rotor speed, power output, efficiency, and toque of the in-service motor. Additionally, an individual is able to confirm the calculations by comparing measured values with values obtained as a result of the motor equivalent circuit evaluation.

  8. Natural gas annual 1993 supplement: Company profiles

    SciTech Connect (OSTI)

    Not Available

    1995-02-01

    The Natural Gas Annual provides information on the supply and disposition of natural gas to a wide audience including industry, consumers, Federal and State agencies, and educational institutions. This report, the Natural Gas Annual 1993 Supplement: Company Profiles, presents a detailed profile of 45 selected companies in the natural gas industry. The purpose of this report is to show the movement of natural gas through the various States served by the companies profiled. The companies in this report are interstate pipeline companies or local distribution companies (LDC`s). Interstate pipeline companies acquire gas supplies from company owned production, purchases from producers, and receipts for transportation for account of others. Pipeline systems, service area maps, company supply and disposition data are presented.

  9. Modular Electric Vehicle Program (MEVP). Final technical report

    SciTech Connect (OSTI)

    1994-03-01

    The Modular Electric Vehicle Program (MEVP) was an EV propulsion system development program in which the technical effort was contracted by DOE to Ford Motor Company. The General Electric Company was a major subcontractor to Ford for the development of the electric subsystem. Sundstrand Power Systems was also a subcontractor to Ford, providing a modified gas turbine engine APU for emissions and performance testing as well as a preliminary design and producibility study for a Gas Turbine-APU for potential use in hybrid/electric vehicles. The four-year research and development effort was cost-shared between Ford, General Electric, Sundstrand Power Systems and DOE. The contract was awarded in response to Ford`s unsolicited proposal. The program objective was to bring electric vehicle propulsion system technology closer to commercialization by developing subsystem components which can be produced from a common design and accommodate a wide range of vehicles; i.e., modularize the components. This concept would enable industry to introduce electric vehicles into the marketplace sooner than would be accomplished via traditional designs in that the economies of mass production could be realized across a spectrum of product offerings. This would eliminate the need to dedicate the design and capital investment to a limited volume product offering which would increase consumer cost and/or lengthen the time required to realize a return on the investment.

  10. Dynein Motor Domain Shows Ring-Shaped Motor, Buttress

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation Current HAB PacketDieselAbsorption Techniques |Dr.Dr.Durathon(tm)Dynein Motor

  11. Dynein Motor Domain Shows Ring-Shaped Motor, Buttress

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalentLaboratory |Sectorfor $1.14Dynein Motor Domain Shows

  12. Dynein Motor Domain Shows Ring-Shaped Motor, Buttress

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalentLaboratory |Sectorfor $1.14Dynein Motor Domain ShowsDynein

  13. Dynein Motor Domain Shows Ring-Shaped Motor, Buttress

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalentLaboratory |Sectorfor $1.14Dynein Motor Domain

  14. Dynein Motor Domain Shows Ring-Shaped Motor, Buttress

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalentLaboratory |Sectorfor $1.14Dynein Motor DomainDynein

  15. Energy Management at Deere & Company 

    E-Print Network [OSTI]

    Boyd, M. P.

    1979-01-01

    Deere & Company appreciates the opportunity to discuss energy management and conservation with you. Energy is a topic that will occupy our thoughts for many years to come and certainly will be in the forefront in the near future. It is a subject...

  16. Efficient Motor System Tools Sponsored by the DOE Motor Challenge Program 

    E-Print Network [OSTI]

    Blazewicz, S.; McCoy, G. A.; Olszewski, M.; Scheihing, P.

    1995-01-01

    The Department of Energy's (DOE) Motor Challenge program is an industry/government collaborative that is working to increase the market penetration of efficient motor-driven systems. In support of the program's Showcase Demonstrations, a variety...

  17. When Should Inverter-Duty Motors Be Specified? - Motor Tip Sheet #14

    SciTech Connect (OSTI)

    2008-07-01

    Electronic adjustable speed drives (ASDs) used to be marketed as “usable with any standard motor.” However, premature failures of motor insulation systems began to occur with the introduction of fast-switching pulse-width modulated (PWM) drives.

  18. System and method for determining stator winding resistance in an AC motor using motor drives

    DOE Patents [OSTI]

    Lu, Bin; Habetler, Thomas G; Zhang, Pinjia

    2013-02-26

    A system and method for determining the stator winding resistance of AC motors is provided. The system includes an AC motor drive having an input connectable to an AC source and an output connectable to an input terminal of an AC motor, a pulse width modulation (PWM) converter having switches therein to control current flow and terminal voltages in the AC motor, and a control system connected to the PWM converter. The control system generates a command signal to cause the PWM converter to control an output of the AC motor drive corresponding to an input to the AC motor, selectively generates a modified command signal to cause the PWM converter to inject a DC signal into the output of the AC motor drive, and determines a stator winding resistance of the AC motor based on the DC signal of at least one of the voltage and current.

  19. Rotary steerable motor system for underground drilling

    DOE Patents [OSTI]

    Turner, William E. (Durham, CT); Perry, Carl A. (Middletown, CT); Wassell, Mark E. (Kingwood, TX); Barbely, Jason R. (Middletown, CT); Burgess, Daniel E. (Middletown, CT); Cobern, Martin E. (Cheshire, CT)

    2010-07-27

    A preferred embodiment of a system for rotating and guiding a drill bit in an underground bore includes a drilling motor and a drive shaft coupled to drilling motor so that drill bit can be rotated by the drilling motor. The system further includes a guidance module having an actuating arm movable between an extended position wherein the actuating arm can contact a surface of the bore and thereby exert a force on the housing of the guidance module, and a retracted position.

  20. Rotary steerable motor system for underground drilling

    DOE Patents [OSTI]

    Turner, William E. (Durham, CT); Perry, Carl A. (Middletown, CT); Wassell, Mark E. (Kingwood, TX); Barbely, Jason R. (Middletown, CT); Burgess, Daniel E. (Middletown, CT); Cobern, Martin E. (Cheshire, CT)

    2008-06-24

    A preferred embodiment of a system for rotating and guiding a drill bit in an underground bore includes a drilling motor and a drive shaft coupled to drilling motor so that drill bit can be rotated by the drilling motor. The system further includes a guidance module having an actuating arm movable between an extended position wherein the actuating arm can contact a surface of the bore and thereby exert a force on the housing of the guidance module, and a retracted position.

  1. MotorMaster+ | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURING OFFICESpecialAPPENDIX F WetlandsofOpen-AccessMotor Systems Motor MotorMaster+

  2. Motor Fleet Request/Authorization Page 1 UNCW Travel System

    E-Print Network [OSTI]

    Olszewski Jr., Edward A.

    Motor Fleet Request/Authorization Page 1 UNCW Travel System Motor Fleet Request/Travel Authorization ENTER THE MOTOR FLEET REQUEST IN THE TRANSPORTATION SECTION OF THE TRAVEL AUTHORIZATION. PRESS CLICK TO ADD AND SELECT MOTOR FLEET FROM THE DROP-DOWN BOX. #12;Motor Fleet Request/Authorization Page 2

  3. Electric Motor Remanufacturing and Energy Savings Sahil Sahni1

    E-Print Network [OSTI]

    Gutowski, Timothy

    Electric Motor Remanufacturing and Energy Savings Sahil Sahni1 , Avid Boustani1 , Timothy Gutowski to this study. #12;Contents 1 Introduction to Electric Motors 1 1.1 Motor Classifications . . . . . . . . . . . . . . . . . . . . . . . 1 1.2 Performance of Motors . . . . . . . . . . . . . . . . . . . . . . 4 1.3 Impact of motor

  4. Cooperative transport by small teams of molecular motors

    E-Print Network [OSTI]

    Stefan Klumpp; Melanie J. I. Muller; Reinhard Lipowsky

    2006-12-04

    Molecular motors power directed transport of cargoes within cells. Even if a single motor is sufficient to transport a cargo, motors often cooperate in small teams. We discuss the cooperative cargo transport by several motors theoretically and explore some of its properties. In particular we emphasize how motor teams can drag cargoes through a viscous environment.

  5. Electrical system for a motor vehicle

    DOE Patents [OSTI]

    Tamor, Michael Alan (Toledo, OH)

    1999-01-01

    In one embodiment of the present invention, an electrical system for a motor vehicle comprises a capacitor, an engine cranking motor coupled to receive motive power from the capacitor, a storage battery and an electrical generator having an electrical power output, the output coupled to provide electrical energy to the capacitor and to the storage battery. The electrical system also includes a resistor which limits current flow from the battery to the engine cranking motor. The electrical system further includes a diode which allows current flow through the diode from the generator to the battery but which blocks current flow through the diode from the battery to the cranking motor.

  6. Estimating Motor Efficiency in the Field

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    testing procedures as described in Institute of Electrical and Electronics Engineers (IEEE) Standard 112-2004 (Test Method B). Field measurements for determining motor efficiency...

  7. Buying an Energy-Efficient Electric Motor

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    efficiency testing protocol is the Institute of Electrical and Elec- tronics Engineers (IEEE ) 112 Method B, which uses a dynamometer to measure motor output under load. Different...

  8. Electrical system for a motor vehicle

    DOE Patents [OSTI]

    Tamor, M.A.

    1999-07-20

    In one embodiment of the present invention, an electrical system for a motor vehicle comprises a capacitor, an engine cranking motor coupled to receive motive power from the capacitor, a storage battery and an electrical generator having an electrical power output, the output coupled to provide electrical energy to the capacitor and to the storage battery. The electrical system also includes a resistor which limits current flow from the battery to the engine cranking motor. The electrical system further includes a diode which allows current flow through the diode from the generator to the battery but which blocks current flow through the diode from the battery to the cranking motor. 2 figs.

  9. Southern Company: DOE Smart Grid RFI Addressing Policy and Logistical...

    Energy Savers [EERE]

    Southern Company: DOE Smart Grid RFI Addressing Policy and Logistical Challenges Southern Company: DOE Smart Grid RFI Addressing Policy and Logistical Challenges Southern Company:...

  10. PP-221 Detroit Edison Company | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PP-221 Detroit.pdf More Documents & Publications PP-228 Edison Sault Electric Company PP-230-4 International Transmission Company PP-76 The Vermont Electric Transmission Company...

  11. 3.1. MOTOR SYSTEM 35 3.1 Motor System

    E-Print Network [OSTI]

    Toronto, University of

    3.1. MOTOR SYSTEM 35 3.1 Motor System The motor system comprises the dynamic model of the fish fish's brain. Since our goal is to animate an animal realistically and at reasonable computational cost controllers by gleaning information from the fish biomechanics literature (Blake, 1983; Alexander, 1992

  12. Motor VFDs | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland: EnergyInformation MontanaOhio:Hill,Morrisville, NewMoshanirMotor

  13. BSA Motors | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LISTStar Energy LLC Jump to:Greece: EnergyMontana)District Office JumpBRMFBSA Motors

  14. Aurica Motors | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to:EAandAmminex A SOpenAshley,AtlantisstromAugusta County,Aurica Motors Jump

  15. Electric Motors and Critical Materials

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i n cEnergy (AZ,Local Government Nonprofit ResidentialofUlrich -andandMOTORS

  16. How to Build a Motor

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation CurrentHenry Bellamy, Ph.D.Food Drive HolidayHoursa Wind Turbine WorksMotor

  17. Natural gas annual 1992: Supplement: Company profiles

    SciTech Connect (OSTI)

    Not Available

    1994-01-01

    The data for the Natural Gas Annual 1991 Supplement : Company Profiles are taken from Form EIA-176, (open quotes) Annual Report of Natural and Supplemental Gas Supply and Disposition (close quotes). Other sources include industry literature and corporate annual reports to shareholders. The companies appearing in this report are major interstate natural gas pipeline companies, large distribution companies, or combination companies with both pipeline and distribution operations. The report contains profiles of 45 corporate families. The profiles describe briefly each company, where it operates, and any important issues that the company faces. The purpose of this report is to show the movement of natural gas through the various States served by the 45 large companies profiled.

  18. Premier Access Insurance Company Certificate of Insurance

    E-Print Network [OSTI]

    Leistikow, Bruce N.

    Premier Access Insurance Company Certificate of Insurance Policy/Group Number: 3725 We certify provided by Premier Access Insurance Company for You and Your eligible Dependents. All terms and benefits...................................................... Family Deductible Amount

  19. Motor Pool Guidelines for Geosciences A completed Motor Pool Request form must be submitted to Denise for

    E-Print Network [OSTI]

    Fay, Noah

    Motor Pool Guidelines for Geosciences · A completed Motor Pool Request form must be submitted on the Geosciences website under the forms link. http://www.geo.arizona.edu/pdf/motor_pool_request.pdf · If the trip be submitted with the Motor Pool Request. · A list of passengers and drivers is for all motor pool travel (this

  20. Productivity genefits from new energy technology: A case study of a paint manufacturing company

    SciTech Connect (OSTI)

    Raghunathan, P.; Capehart, B.L.

    1997-06-01

    In many cases, implementing new energy efficiency technologies not only helps facilities reduce their energy costs, but it also creates greater profits by increasing productivity. These added benefits from productivity improvements can sometimes be greater than the energy cost savings, and can result in an attractive overall payback period for implementing the new technology. This paper presents a case study of productivity improvement at a paint manufacturing company as a result of implementing new energy efficiency technology. During an industrial energy assessment, it was noted that the company had experienced frequent failures of motor belts and sheaves on five paint mixers resulting in significant replacement costs and labor costs. In addition, a bigger loss was being suffered due to lost potential profit associated with the frequent work stoppages. The IAC recommendation was to install motor soft starters (also known as motor voltage controllers) on the five mixing machines. Installation of soft starters would have the following benefits: lower energy costs, lower replacement costs for transmission components, lower labor costs, and higher production levels and increased profits. The total annual benefits were estimated at $122,659, of which the benefits from increased productivity were nearly $67,000. The overall simple payback period for installing the soft starters was less than 2 months.

  1. Company Name Company Name Address Place Zip Sector Product Website

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTIONRobertsdale, Alabama (Utility Company)| Open EnergyColoradoBiomassPlus Jump

  2. Energy Audit Helps Small Company Stay Competitive

    Broader source: Energy.gov [DOE]

    The recommended improvements are saving the West Linn Paper Company in Oregon an annual cost of about $380,000.

  3. Development of Ulta-Efficient Electric Motors

    SciTech Connect (OSTI)

    Shoykhet, B.; Schiferl, R.; Duckworth, R.; Rey, C.M.; Schwenterly, S.W.; Gouge, M.J.

    2008-05-01

    Electric motors utilize a large amount of electrical energy in utility and industrial applications. Electric motors constructed with high temperature superconducting (HTS) materials have the potential to dramatically reduce electric motor size and losses. HTS motors are best suited for large motor applications at ratings above 1000 horsepower (hp), where the energy savings from the efficiency improvement can overcome the additional power required to keep the superconductors on the rotor cooled. Large HTS based motors are expected to be half the volume and have half the losses of conventional induction motors of the same rating. For a 5000 hp industrial motor, this energy savings can result in $50,000 in operating cost savings over the course of a single year of operation. Since large horsepower motors utilize (or convert) about 30% of the electrical power generated in the United States and about 70% of large motors are candidates for replacement by HTS motors, the annual energy savings potential through the utilization of HTS motors can be up to $1 Billion in the United States alone. Research in the application of HTS materials to electric motors has lead to a number of HTS motor prototypes yet no industrial HTS motor product has yet been introduced. These motor demonstrations have been synchronous motors with HTS field windings, on the rotor. Figure 1-1 shows a solid model rendering of this type of motor. The rotor winding is made with HTS coils that are held at cryogenic temperature by introducing cooling fluid from the cryocooler to the rotor through a transfer coupling. The stator winding is made of copper wire. The HTS winding is thermally isolated from the warm armature and motor shafts by a vacuum insulation space and through the use of composite torque tubes. The stator in Figure 1-1 is an air core stator in that the stator teeth and a small part of the yoke is made up of nonmagnetic material so the magnetic fields distribute themselves as if in air. Between the HTS field winding and the physical air gap is a series of concentric cylinders that act as vacuum insulation space walls as well as conducting paths for induced currents to flow in order to shield the HTS winding and the rotor cold space from time dependent fields. These time dependent fields may be caused by rotor hunting, during a change in motor load, or by non-fundamental component voltages and currents applied by the inverter. These motors are variable speed controlled by the inverter. Common large motor utility and industrial applications are pump and fan drives that are best suited by a variable speed motor. Inverter control of the HTS motor eliminates the need to design the rotor for line starting, which would dump a large amount of heat into the rotor that would then heavily tax the cryogenic cooling system. The field winding is fed by a brushless exciter that provides DC current to the HTS rotor winding. The stator winding is air or water cooled. Technical and commercial hurdles to industrial HTS motor product introduction and customer acceptance include (1) the high cost of HTS wire and the cryogenic cooling system components, (2) customer concerns about reliability of HTS motors, and (3) the ability to attain the loss reduction potential of large HTS motors. Reliance Electric has demonstrated a number of HTS based electric motors up to a 1000 hp, variable speed synchronous motor with an HTS field winding in the year 2000. In 2001 this motor was tested to 1600 hp with a sinusoidal (constant frequency) supply. Figure 1-2 shows the HTS motor on the dynamometer test stand in the Reliance Electric test lab. The extensive test program of the 1000 hp motor successfully demonstrated the technical feasibility of large HTS motors and the basic technologies involved, however the test results did indicate the need for design refinements. In addition, test results served to identify other more fundamental critical technology issues, and revealed the need to continue research efforts in order to improve future HTS motor first cost, reliability, and performa

  4. UNDERSTANDING OUR COMPANY AN IBM PROSPECTUS

    E-Print Network [OSTI]

    a company or planned venture so that individuals can make informed decisions. Fully understanding the future lay in consolidation, and chose to bulk up. And then some companies just concluded that their core confidence in IBM's future. We have done much in recent years to transform our company. In a number

  5. The US Motor Systems Market Assessment: Baseline and Survey Methods 

    E-Print Network [OSTI]

    Rosenberg, M.

    1997-01-01

    This paper summarizes the current status of the US Motor Systems Market Assessment. This component of the Department of Energy's Motor Challenge program will provide a detailed portrait of the inventory of motor systems currently in use in US...

  6. What does motor efference copy represent? evidence from speech production

    E-Print Network [OSTI]

    Niziolek, CA; Nagarajan, SS; Houde, JF

    2013-01-01

    What does motor efference copy represent? Evidence fromAbbreviated title: What does motor efference copy represent?SJ, Wang X (2003) Sensory-Motor Interaction in the Primate

  7. Motor Neurons Controlling Fluid Ingestion in Drosophila melanogaster

    E-Print Network [OSTI]

    Manzo, Andrea

    2011-01-01

    coordination of rhythmic motor patterns. J Neurophysiol 90:Figure 3.5. Individual motor neurons project to eitherGraphs as in (C-D) for MN12 motor neurons. n=10-13 flies per

  8. On the Costs of Air Pollution from Motor Vehicles

    E-Print Network [OSTI]

    Small, Kenneth A.; Kazimi, Camilla

    1995-01-01

    Costs of Air Pollution fromMotor Vehicles By Kenneth A.we have found, motor vehicle pollution sterns best addressedCosts of Air Pollution from Motor Vehicles K A Small and C°

  9. BPM Motors in Residential Gas Furnaces: What are the Savings?

    E-Print Network [OSTI]

    Lutz, James; Franco, Victor; Lekov, Alex; Wong-Parodi, Gabrielle

    2006-01-01

    Power curves show blower motor input power as a function ofOverall, it appears the BPM motors used in furnaces offerThe impact of ECM furnace motors on natural gas use and

  10. MOTORIZED WINTER RECREATION IMPACTS ON SNOWPACK PROPERTIES Submitted by

    E-Print Network [OSTI]

    Anderson, Charles W.

    THESIS MOTORIZED WINTER RECREATION IMPACTS ON SNOWPACK PROPERTIES Submitted by Jared Tucker Heath 2011 All Rights Reserved #12;ii ABSTRACT MOTORIZED WINTER RECREATION IMPACTS ON SNOWPACK PROPERTIES interactions. Motorized winter recreation in the backcountry compacts the snow possibly influencing

  11. Influence of direct motor-motor interaction in models for cargo transport by a single team of motors

    E-Print Network [OSTI]

    Sebastian Bouzat; Fernando Falo

    2010-12-14

    We analyze theoretically the effects of excluded-volume interactions between motors on the dynamics of a cargo driven by multiple motors. The model considered shares many commons with other recently proposed in the literature, with the addition of direct interaction between motors and motor back steps. The cargo is assumed to follow a continuum Langevin dynamics, while individual motors evolve following a Monte Carlo algorithm based on experimentally accessible probabilities for discrete forward and backward jumps, and attachment and detachment rates. The links between cargo and motors are considered as non linear springs. By means of numerical simulations we compute the relevant quantities characterizing the dynamical properties of the system, and we compare the results to those for non interacting motors. We find that interactions lead to quite relevant changes in the force-velocity relation for cargo, with a considerable reduction of the stall force, and cause also a notable decrease of the run length. These effects are mainly due to traffic-like phenomena in the microtubule. The consideration of several parallel tracks for motors reduces such effects. However, we find that for realistic values of the number of motors and the number of tracks, the influence of interactions on the global parameters of transport of cargo are far from being negligible. Our studies provide also an analysis of the relevance of motor back steps on the modeling, and of the influence of different assumptions for the detachment rates. In particular, we discuss these two aspects in connection with the possibility of observing processive back motion of cargo at large load forces.

  12. Rare-Earth-Free Traction Motor: Rare Earth-Free Traction Motor for Electric Vehicle Applications

    SciTech Connect (OSTI)

    2012-01-01

    REACT Project: Baldor will develop a new type of traction motor with the potential to efficiently power future generations of EVs. Unlike today’s large, bulky EV motors which use expensive, imported rare-earth-based magnets, Baldor’s motor could be light, compact, contain no rare earth materials, and have the potential to deliver more torque at a substantially lower cost. Key innovations in this project include the use of a unique motor design, incorporation of an improved cooling system, and the development of advanced materials manufacturing techniques. These innovations could significantly reduce the cost of an electric motor.

  13. Total Economics of Energy Efficient Motors 

    E-Print Network [OSTI]

    Nester, A. T.

    1984-01-01

    Due to the large increases in cost of electrical energy in recent years, the energy savings attainable with the use of energy-efficient motors is very attractive to all motor users. But energy and electric demand charge savings tell only part...

  14. Oscillation control system for electric motor drive

    DOE Patents [OSTI]

    Slicker, James M. (Union Lake, MI); Sereshteh, Ahmad (Union Lake, MI)

    1988-01-01

    A feedback system for controlling mechanical oscillations in the torsionally complaint drive train of an electric or other vehicle. Motor speed is converted in a processor to estimate state signals in which a plant model which are used to electronically modify thetorque commands applied to the motor.

  15. Commercial Motor Vehicle Brake Assessment Tools

    E-Print Network [OSTI]

    Commercial Motor Vehicle Brake Assessment Tools Commercial Motor Vehicle Roadside Technology to deceleration in g's ­ Passing score: BE43.5 · Enforcement tool for only 3 years. · Based solely on brake Brake Research · CMVRTC research built on these enforcement tools ­ Correlation Study ­ Level-1 / PBBT

  16. Molecular Motors Interacting with Their Own Tracks

    E-Print Network [OSTI]

    Max N. Artyomov; Alexander Yu. Morozov; Anatoly B. Kolomeisky

    2007-12-20

    Dynamics of molecular motors that move along linear lattices and interact with them via reversible destruction of specific lattice bonds is investigated theoretically by analyzing exactly solvable discrete-state ``burnt-bridge'' models. Molecular motors are viewed as diffusing particles that can asymmetrically break or rebuild periodically distributed weak links when passing over them. Our explicit calculations of dynamic properties show that coupling the transport of the unbiased molecular motor with the bridge-burning mechanism leads to a directed motion that lowers fluctuations and produces a dynamic transition in the limit of low concentration of weak links. Interaction between the backward biased molecular motor and the bridge-burning mechanism yields a complex dynamic behavior. For the reversible dissociation the backward motion of the molecular motor is slowed down. There is a change in the direction of the molecular motor's motion for some range of parameters. The molecular motor also experiences non-monotonic fluctuations due to the action of two opposing mechanisms: the reduced activity after the burned sites and locking of large fluctuations. Large spatial fluctuations are observed when two mechanisms are comparable. The properties of the molecular motor are different for the irreversible burning of bridges where the velocity and fluctuations are suppressed for some concentration range, and the dynamic transition is also observed. Dynamics of the system is discussed in terms of the effective driving forces and transitions between different diffusional regimes.

  17. Duty-ratio of cooperative molecular motors

    E-Print Network [OSTI]

    Nadiv Dharan; Oded Farago

    2012-01-22

    Molecular motors are found throughout the cells of the human body, and have many different and important roles. These micro-machines move along filament tracks, and have the ability to convert chemical energy into mechanical work that powers cellular motility. Different types of motors are characterized by different duty-ratios, which is the fraction of time that a motor is attached to its filament. In the case of myosin II - a non-processive molecular machine with a low duty ratio - cooperativity between several motors is essential to induce motion along its actin filament track. In this work we use statistical mechanical tools to calculate the duty ratio of cooperative molecular motors. The model suggests that the effective duty ratio of non-processive motors that work in cooperation is lower than the duty ratio of the individual motors. The origin of this effect is the elastic tension that develops in the filament which is relieved when motors detach from the track.

  18. Entropic Studies of Cytoskeletal Motors Jamming

    E-Print Network [OSTI]

    C. M. Arizmendi; H. G. E. Hentschel; F. Family

    2007-04-28

    Can the different causes for disruption of intracellular transport be traced from the trajectories of the molecular motors on the cytoskeletal filaments? We will attempt to answer this important question in a Monte Carlo model of microtubule-motor protein interaction from the point of view of information theory.

  19. Oscillation control system for electric motor drive

    DOE Patents [OSTI]

    Slicker, J.M.; Sereshteh, A.

    1988-08-30

    A feedback system for controlling mechanical oscillations in the torsionally complaint drive train of an electric or other vehicle. Motor speed is converted in a processor to estimate state signals in which a plant model which are used to electronically modify the torque commands applied to the motor. 5 figs.

  20. Nanoconfined catalytic Ångström-size motors

    E-Print Network [OSTI]

    Peter H. Colberg; Raymond Kapral

    2015-01-13

    Chemically-powered synthetic micron and nano-scale motors that propel themselves in solution are being intensively studied because of the wide range of potential applications that exploit their directed motion. Recent experiments have shown that, even on the molecular scale, small-molecule catalysts and single enzyme molecules exhibit properties that have been attributed to self-propulsion. Simulations of very small {\\AA}ngstr\\"om-size synthetic motors in bulk solution have shown similar effects. Applications of such small motors in the cell or in microfluidic devices require knowledge of how these motors interact with boundaries. Molecular dynamics is used to investigate the properties of {\\AA}ngstr\\"om-size synthetic chemically-powered motors confined between walls separated by distances of tens of nanometers. Evidence for strong structural ordering of the motors between the walls, which reflects the finite size of solvent molecules and depends on solvent exclusion forces, is provided. Dynamical properties, such as average motor velocity, orientational relaxation and mean square displacement, are anisotropic and depend on the distance from the walls. This research presents information needed for potential applications that use these motors in the complex confined geometries encountered in biology and the laboratory.

  1. Performance improvement of permanent magnet ac motors 

    E-Print Network [OSTI]

    Parsa, Leila

    2005-08-29

    positively to output torque, a five-phase permanent magnet motor with quasi-rectangular back-EMF waveform is supplied with combined fundamental and third harmonic of currents. For modeling and analysis of the motor a 0 3 3 1 1 q d q d frame of reference...

  2. Ultra-Efficient and Power-Dense Electric Motors

    SciTech Connect (OSTI)

    2009-01-01

    This factsheet describes a research project whose goal is to develop line-start and line-run constant-speed electric motors and simple-to-control electric motors with the goal of obtaining at least a 30% reduction in motor losses as compared to conventional energy-efficient induction motors and a 15% reduction in motor losses as compared to NEMA Premium® efficient induction motors.

  3. Illinois Company Implementing Solar Energy

    Office of Energy Efficiency and Renewable Energy (EERE)

    J.F. Family Limited Partnership has been awarded $191,000 through the Recovery Act toward the use of solar energy at its Lakefront Parkway property in Edwardsville, Ill., which is the company headquarters for J.F. Electric Inc. The funding will be used to install a 75-kW solar photovoltaic system on the building’s roof, creating electricity on-site and creating or saving a total of 14 jobs.

  4. Counter-Rotating Tandem Motor Drilling System

    SciTech Connect (OSTI)

    Kent Perry

    2009-04-30

    Gas Technology Institute (GTI), in partnership with Dennis Tool Company (DTC), has worked to develop an advanced drill bit system to be used with microhole drilling assemblies. One of the main objectives of this project was to utilize new and existing coiled tubing and slimhole drilling technologies to develop Microhole Technology (MHT) so as to make significant reductions in the cost of E&P down to 5000 feet in wellbores as small as 3.5 inches in diameter. This new technology was developed to work toward the DOE's goal of enabling domestic shallow oil and gas wells to be drilled inexpensively compared to wells drilled utilizing conventional drilling practices. Overall drilling costs can be lowered by drilling a well as quickly as possible. For this reason, a high drilling rate of penetration is always desired. In general, high drilling rates of penetration (ROP) can be achieved by increasing the weight on bit and increasing the rotary speed of the bit. As the weight on bit is increased, the cutting inserts penetrate deeper into the rock, resulting in a deeper depth of cut. As the depth of cut increases, the amount of torque required to turn the bit also increases. The Counter-Rotating Tandem Motor Drilling System (CRTMDS) was planned to achieve high rate of penetration (ROP) resulting in the reduction of the drilling cost. The system includes two counter-rotating cutter systems to reduce or eliminate the reactive torque the drillpipe or coiled tubing must resist. This would allow the application of maximum weight-on-bit and rotational velocities that a coiled tubing drilling unit is capable of delivering. Several variations of the CRTDMS were designed, manufactured and tested. The original tests failed leading to design modifications. Two versions of the modified system were tested and showed that the concept is both positive and practical; however, the tests showed that for the system to be robust and durable, borehole diameter should be substantially larger than that of slim holes. As a result, the research team decided to complete the project, document the tested designs and seek further support for the concept outside of the DOE.

  5. A Five-Leg Inverter for Driving a Traction Motor and a Compressor Motor

    SciTech Connect (OSTI)

    Su, Gui-Jia; Hsu, John S

    2006-01-01

    This paper presents an integrated inverter for speed control of a traction motor and a compressor motor to reduce the compressor drive cost in EV/HEV applications. The inverter comprises five phase-legs; three of which are for control of a three-phase traction motor and the remaining two for a two-phase compressor motor with three terminals. The common terminal of the two-phase motor is tied to the neutral point of the three-phase traction motor to eliminate the requirement of a third phase leg. Further cost savings are made possible by sharing the switching devices, dc bus filter capacitors, gate drive power supplies, and control circuit. Simulation and experimental results are included to verify that speed control of the two motors is independent from each other.

  6. Improve Motor System Efficiency with MotorMaster+, Software Tools for Industry, Industrial Technologies Program (ITP) (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2008-12-01

    This fact sheet describes how the Industrial Technologies Program MotorMaster+ software tool aids industrial plants with finding energy-efficient motor replacement options and managing motor systems.

  7. The China Motor Systems Energy Conservation Program: A major national initiative to reduce motor system energy use in China

    E-Print Network [OSTI]

    Nadel, Steven; Wang, Wanxing; Liu, Peter; McKane, Aimee T.

    2001-01-01

    Motor Systems Energy Conservation Program: A Major Nationalnational program tentatively called the China Motor Systems Energy Conservation Program.a major national program to reduce motor system energy use.

  8. Informao Confidencial e Proprietria Confidential and Proprietary Information Company Profile

    E-Print Network [OSTI]

    Informação Confidencial e Proprietária Confidential and Proprietary Information Company Profile Information 2 Summary (I) Company Facts (II) Company Capabilities (III) Projects & Products (IV) On Information (I) Company Facts #12;26-Aug-2010 4 Informação Confidencial e Proprietária Confidential

  9. Ångström-scale chemically powered motors

    E-Print Network [OSTI]

    Peter H. Colberg; Raymond Kapral

    2014-05-16

    Like their larger micron-scale counterparts, {\\AA}ngstr\\"om-scale chemically self-propelled motors use asymmetric catalytic activity to produce self-generated concentration gradients that lead to directed motion. Unlike their micron-scale counterparts, the sizes of {\\AA}ngstr\\"om-scale motors are comparable to the solvent molecules in which they move, they are dominated by fluctuations, and they operate on very different time scales. These new features are studied using molecular dynamics simulations of small sphere dimer motors. We show that the ballistic regime is dominated by the thermal speed but the diffusion coefficients of these motors are orders of magnitude larger than inactive dimers. Such small motors may find applications in nano-confined systems or perhaps eventually in the cell.

  10. High-speed electrical motor evaluation

    SciTech Connect (OSTI)

    Not Available

    1989-02-03

    Under this task, MTI conducted a general review of state-of-the-art high-speed motors. The purpose of this review was to assess the operating parameters, limitations and performance of existing motor designs, and to establish commercial sources for a motor compatible with the requirements of the Brayton-cycle system. After the motor requirements were established, a list of motor types, manufacturers and designs capable of achieving the requisite performance was compiled. This list was based on an in-house evaluation of designs. Following the establishment of these options, a technical evaluation of the designs selected was conducted. In parallel with their evaluations, MTI focused on the establishment of commercial sources.

  11. Best Practices in Non-Motorized Transport Planning, Implementation...

    Open Energy Info (EERE)

    Best Practices in Non-Motorized Transport Planning, Implementation and Maintenance Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Best Practices in Non-Motorized...

  12. Improve Motor Operation at Off-Design Voltages

    SciTech Connect (OSTI)

    Not Available

    2008-07-01

    This is one in a series of tip sheets to help manufacturers optimize their industrial motor and motor-driven systems.

  13. Minimize Adverse Motor and Adjustable Speed Drive Interactions

    SciTech Connect (OSTI)

    Not Available

    2008-07-01

    This is one in a series of tip sheets to help manufacturers optimize their industrial motor and motor-driven systems.

  14. Improving Motor and Drive System Performance: A Sourcebook for Industry

    SciTech Connect (OSTI)

    Not Available

    2008-09-01

    This is one in a series of sourcebooks to assist industrial personnel in understanding and optimizing motors and motor-driven systems

  15. When Should Inverter-Duty Motors Be Specified?

    SciTech Connect (OSTI)

    Not Available

    2008-07-01

    This is one in a series of tip sheets to help manufacturers optimize their industrial motor and motor-driven systems.

  16. Carbonyl Emissions from Gasoline and Diesel Motor Vehicles

    E-Print Network [OSTI]

    Jakober, Chris A.

    2008-01-01

    fraction of light-duty gasoline vehicle particulate matterQuinone emissions from gasoline and diesel motor vehicles.32 organic compounds from gasoline- powered motor vehicles.

  17. Improving Motor and Drive System Performance - A Sourcebook for...

    Broader source: Energy.gov (indexed) [DOE]

    sourcebook outlines opportunities to improve motor and drive systems performance. The sourcebook is divided into four main sections: Motor and Drive System Basics: Summarizes...

  18. United States Industrial Motor Systems Market Opportunities Assessment...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Motor Systems Market Opportunities Assessment: Executive Summary United States Industrial Motor Systems Market Opportunities Assessment: Executive Summary In addition to serving...

  19. Continuous Energy Improvement in Motor Driven Systems - A Guidebook...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Improvement in Motor Driven Systems - A Guidebook for Industry Continuous Energy Improvement in Motor Driven Systems - A Guidebook for Industry This guidebook provides a...

  20. Motor monitoring method and apparatus using high frequency current components

    DOE Patents [OSTI]

    Casada, Donald A. (Knoxville, TN)

    1996-01-01

    A motor current analysis method and apparatus for monitoring electrical-motor-driven devices. The method and apparatus utilize high frequency portions of the motor current spectra to evaluate the condition of the electric motor and the device driven by the electric motor. The motor current signal produced as a result of an electric motor is monitored and the low frequency components of the signal are removed by a high-pass filter. The signal is then analyzed to determine the condition of the electrical motor and the driven device.

  1. Improving Motor and Drive System Performance: A Sourcebook for Industry

    SciTech Connect (OSTI)

    2010-06-25

    This is one in a series of sourcebooks to assist industrial personnel in understanding and optimizing motors and motor-driven systems.

  2. United States Industrial Motor-Driven Systems Market Assessment...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    United States Industrial Motor-Driven Systems Market Assessment: Charting a Roadmap to Energy Savings for Industry United States Industrial Motor-Driven Systems Market Assessment:...

  3. When Should Inverter-Duty Motors Be Specified? | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    power semiconductors can lead to voltage overshoots. These voltage spikes can rapidly damage a motor's insulation system, resulting in premature motor failure. This tip sheet...

  4. Advanced Power Electronics and Electric Motors R&D

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (PM) Motors Reduce cost by 75% - required to meet 2020 target Motor design optimization may reduce cost by 25% to 40%. Magnet Materials Magnet material costs are 50%...

  5. Premium Efficiency Motor Selection and Application Guide - A...

    Broader source: Energy.gov (indexed) [DOE]

    identifying energy and cost savings that can come from replacing motors with premium efficiency units. The handbook provides an overview of current motor use in the industrial...

  6. New rocket propellant and motor design offer high-performance...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New rocket propellant and motor design offer high-performance and safety New rocket propellant and motor design offer high-performance and safety Scientists recently flight tested...

  7. Ultra-Efficient and Power-Dense Electric Motors

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ultra-Efficient and Power-Dense Electric Motors Advanced Electric Motors Offer Large Energy Savings in Industrial Applications Pumps, fans, and compressors use more than 60% of...

  8. Exposure to motor vehicle emissions: An intake fraction approach

    E-Print Network [OSTI]

    Marshall, Julian D.

    2002-01-01

    on California Light-Duty Vehicle Emissions." EnvironmentalGasoline on Motor Vehicle Emissions. 2. Volatile OrganicGasoline on Motor Vehicle Emissions. I. Mass Emission

  9. Electrostatic generator/motor configurations

    DOE Patents [OSTI]

    Post, Richard Freeman

    2012-09-11

    Electrostatic generators/motors designs are provided that include a stator fixedly connected to a first central support centered about a central axis. The stator elements are attached to the first central support. Similarly, a second stator is connected to a central support centered about the central axis, and the second stator has stator elements attached to the second central support. A rotor is located between the first stator and the second stator and includes an outer support, where the rotor is rotatably centered about the central axis, the rotor having elements in contact with the outer support, each rotor element having an extending rotor portion that extends radially from the outer support toward the axis of rotation.

  10. Company Name Company Name Address Place Zip Product Website Region

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTIONRobertsdale, Alabama (Utility Company)| Open EnergyColoradoBiomassPlus Jump to:OpenInc CPIde

  11. Company Name Company Name Address Place Zip Sector Product Website

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTIONRobertsdale, Alabama (Utility Company)| Open EnergyColoradoBiomassPlus Jump to:OpenInc CPIdeSoltech

  12. Company Name Company Name Address Place Zip Sector Product Website

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTIONRobertsdale, Alabama (Utility Company)| Open EnergyColoradoBiomassPlus Jump to:OpenInc

  13. Company Name Company Name Address Place Zip Sector Product Website

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTIONRobertsdale, Alabama (Utility Company)| Open EnergyColoradoBiomassPlus Jump to:OpenIncEnergy Ltd A A

  14. Company Name Company Name Address Place Zip Sector Product Website

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTIONRobertsdale, Alabama (Utility Company)| Open EnergyColoradoBiomassPlus Jump to:OpenIncEnergy Ltd A

  15. Company Name Company Name Address Place Zip Sector Product Website

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTIONRobertsdale, Alabama (Utility Company)| Open EnergyColoradoBiomassPlus Jump to:OpenIncEnergy Ltd

  16. Company Name Company Name Address Place Zip Sector Product Website

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTIONRobertsdale, Alabama (Utility Company)| Open EnergyColoradoBiomassPlus Jump to:OpenIncEnergy LtdC

  17. Company Name Company Name Address Place Zip Sector Product Website

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTIONRobertsdale, Alabama (Utility Company)| Open EnergyColoradoBiomassPlus Jump to:OpenIncEnergy LtdCvan

  18. Company Name Company Name Address Place Zip Sector Product Website

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTIONRobertsdale, Alabama (Utility Company)| Open EnergyColoradoBiomassPlus Jump to:OpenIncEnergy

  19. Company Name Company Name Address Place Zip Sector Product Website

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTIONRobertsdale, Alabama (Utility Company)| Open EnergyColoradoBiomassPlus Jump to:OpenIncEnergyCharge

  20. Company Name Company Name Address Place Zip Sector Product Website

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTIONRobertsdale, Alabama (Utility Company)| Open EnergyColoradoBiomassPlus JumpQinghai Dangshun

  1. Company Level Imports Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1 Table 1.101Company Level Imports Explanatory Notes

  2. The efficiency of the molecular motors

    E-Print Network [OSTI]

    Yunxin Zhang

    2009-02-12

    Molecular motors convert chemical energy into mechanical work while operating in an environment dominated by Brownian motion. The aim of this paper is to explore the flow of energy between the molecular motors and its surroundings, in particular, its efficiency. Based on the Fokker-Planck equation with either $N$ or infinite chemical states, we find that the energy efficiency of the molecular motors, whether the Stokes efficiency or the usual thermodynamic efficiency, is strictly bounded by 1, because of the dissipation of the energy in both the overdamped surroundings and in the process of the chemical reaction.

  3. Extended core for motor/generator

    DOE Patents [OSTI]

    Shoykhet, Boris A.

    2006-08-22

    An extended stator core in a motor/generator can be utilized to mitigate losses in end regions of the core and a frame of the motor/generator. To mitigate the losses, the stator core can be extended to a length substantially equivalent to or greater than a length of a magnetically active portion in the rotor. Alternatively, a conventional length stator core can be utilized with a shortened magnetically active portion to mitigate losses in the motor/generator. To mitigate the losses in the core caused by stator winding, the core can be extended to a length substantially equivalent or greater than a length of stator winding.

  4. Extended core for motor/generator

    DOE Patents [OSTI]

    Shoykhet, Boris A.

    2005-05-10

    An extended stator core in a motor/generator can be utilized to mitigate losses in end regions of the core and a frame of the motor/generator. To mitigate the losses, the stator core can be extended to a length substantially equivalent to or greater than a length of a magnetically active portion in the rotor. Alternatively, a conventional length stator core can be utilized with a shortened magnetically active portion to mitigate losses in the motor/generator. To mitigate the losses in the core caused by stator winding, the core can be extended to a length substantially equivalent or greater than a length of stator winding.

  5. Synchronous motor with soft start element formed between the motor rotor and motor output shaft to successfully synchronize loads that have high inertia and/or high torque

    DOE Patents [OSTI]

    Umans, Stephen D; Nisley, Donald L; Melfi, Michael J

    2014-10-28

    A line-start synchronous motor has a housing, a rotor shaft, and an output shaft. A soft-start coupling portion is operatively coupled to the output shaft and the rotor shaft. The soft-start coupling portion is configurable to enable the synchronous motor to obtain synchronous operation and to drive, at least near synchronous speed during normal steady state operation of the motor, a load having characteristics sufficient to prevent obtaining normal synchronous operation of the motor when the motor is operatively connected to the load in the absence of the soft-start coupling. The synchronous motor is sufficiently rated to obtain synchronous operation and to drive, at least near synchronous speed during normal steady state operation of the motor, a load having characteristics sufficient to prevent obtaining normal synchronous operation of the motor when the motor is operatively connected to the load in the absence of the soft-start coupling.

  6. Homopolar dc motor and trapped flux brushless dc motor using high temperature superconductor materials

    SciTech Connect (OSTI)

    Crapo, A.D.; Lloyd, J.D. (Emerson Electric Co., St. Louis, MO (US))

    1991-03-01

    This paper reports on two motors designed and built for use with high temperature superconductor (HTSC) materials. They are a homopolar DC motor that will use HTSC field windings and a brushless DC motor that will use bulk HTSC material to trap flux in steel rotor poles. The HTSC field windings of the homopolar DC motor are designed to operate at 1000 Amperes/cm{sup 2} in a 0.010 Tesla (100 Gauss) field. In order to maximize torque in the homopolar DC motor, an iron magnetic circuit with small air gaps gives maximum flux for minimum Ampere turns in the field. A copper field winding version of the homopolar DC motor has been tested while the authors wait for 575 Ampere turn HTSC coils.

  7. Report on Toyota Prius Motor Thermal Management

    SciTech Connect (OSTI)

    Hsu, J.S.

    2005-02-11

    In the current hybrid vehicle market, the Toyota Prius drive system is considered the leader in electrical, mechanical, and manufacturing innovations. It is a significant accomplishment that Toyota is able to manufacture and sell the vehicle for a profit. The Toyota Prius traction motor design approach for reducing manufacturing costs and the motor s torque capability have been studied and tested. The findings were presented in two previous Oak Ridge National Laboratory (ORNL) reports. The conclusions from this report reveal, through temperature rise tests, that the 2004 Toyota Prius (THSII) motor is applicable only for use in a hybrid automobile. It would be significantly undersized if used in a fuel cell vehicle application. The power rating of the Prius motor is limited by the permissible temperature rise of the motor winding (170 C) and the motor cooling oil (158 C). The continuous ratings at base speed (1200 rpm) with different coolant temperatures are projected from test data at 900 rpm. They are approximately 15 kW with 105 C coolant and 21 kW with 35 C coolant. These continuous ratings are much lower than the 30 kW specified as a technical motor target of the U.S. Department of Energy FreedomCAR Program. All tests were conducted at about 24 C ambient temperature. The load angle of each torque adjustment was monitored to prevent a sudden stop of the motor if the peak torque were exceeded, as indicated by the load angle in the region greater than 90 electrical degrees. For peak power with 400 Nm torque at 1200 rpm, the permissible running time depends upon the initial winding temperature condition. The projected rate of winding temperature rise is approximately 2.1 C/sec. The cooling-oil temperature does not change much during short peak power operation. For light and medium load situations, the efficiency varies from 80% to above 90%, and the power factor varies from 70% to above 90%, depending on the load and speed. When the motor is loaded heavily near the peak-torque (400-Nm) region, the efficiency goes down to the 40-50% range, and the power factor is nearly 100%. The efficiency is not a major concern at the high-torque region. The water-ethylene-glycol heat exchanger attached to the motor is small. During continuous operation, it dissipates about 76% of the total motor heat loss with 35 C coolant. The heat exchanger is less effective when the coolant temperature increases. With 75 C coolant, the heat exchanger dissipates about 38% of the motor heat. When the coolant temperature is 105 C, the heat exchanger not only stops cooling the motor but also adds heat to the large motor housing that acts as an air-cooled heat sink. From start to the base speed, 400 Nms of torque can be produced by the Prius motor with a reasonably low stator current. However, the permissible running time of the motor depends on the load drawn from the motor and the coolant temperature. In the Toyota Prius hybrid configuration, if the motor gets too hot and cannot keep running, the load can be shifted back to the engine. The motor acts to improve the system efficiency without being overly designed. A detailed thermal model was developed to help predict the temperature levels in key motor components. The model was calibrated and compared with the experimentally measured temperatures. Very good agreement was obtained between model and experiment. This model can now be used to predict the temperature of key motor components at a variety of operating conditions and to evaluate the thermal characteristics of new motor designs. It should be pointed out that a fuel-cell motor does not have an engine to fall back on to provide the needed wheel power. Therefore, the design philosophy of a fuel-cell motor is very different from that of a hybrid Prius motor. Further thermal management studies in the high-speed region of the Prius motor, fed by its inverter, are planned.

  8. Motor transport of self-assembled cargos in crowded environments

    E-Print Network [OSTI]

    Ross, Jennifer

    Motor transport of self-assembled cargos in crowded environments Leslie Conwaya , Derek Woodb is performed by multiple motors working in concert. However, the mechanism of motor association to cargos is unknown. It is also unknown how long individual motors stay attached, how many are active, and how

  9. Inferring Motor Programs from Images of Handwritten Digits

    E-Print Network [OSTI]

    Hinton, Geoffrey E.

    Inferring Motor Programs from Images of Handwritten Digits Geoffrey Hinton and Vinod Nair whose stiffnesses are controlled by a motor program. We show how neural networks can be trained to infer the motor programs required to accurately reconstruct the MNIST digits. The inferred motor programs can

  10. Motor Fleet Approval Process Page 1 UNCW Travel System

    E-Print Network [OSTI]

    Olszewski Jr., Edward A.

    Motor Fleet Approval Process Page 1 UNCW Travel System Motor Fleet Approval Process Preparer submits the motor fleet vehicle request; and the request is automatically routed to the traveler an e-mail notifying them there are pending motor fleet signatures. If you are both supervisor

  11. 38 CHAPTER 1. ASSEMBLY MANUAL BiDirectional Motor

    E-Print Network [OSTI]

    38 CHAPTER 1. ASSEMBLY MANUAL Bi­Directional Motor and Infrared Beacon Uni­Directional Motor, LED to build reliable cables and connectors for the motors and sensors that will plug into the robot more reliable overall and will ease development difficulties. Sensors and motors are built

  12. Convective Cooling and Passive Stack Improvements in Motors (Presentation)

    SciTech Connect (OSTI)

    Bennion, K.

    2014-06-01

    This presentation discusses current research at NREL in convective cooling and passive stack improvements in motors.

  13. Case Histories of Energy Efficient Motors 

    E-Print Network [OSTI]

    Riley, J. C.; Comiskey, W. T

    1985-01-01

    A number of new energy efficient (EE) motors have been installed at the Port Neches SBR plant in the past few years. Some of these installations presented many problems. The measurement of dollars saved has been difficult. Easy installations...

  14. High speed linear induction motor efficiency optimization

    E-Print Network [OSTI]

    Johnson, Andrew P. (Andrew Peter)

    2005-01-01

    One of the reasons linear motors, a technology nearly a century old, have not been adopted for a large number of linear motion applications is that they have historically had poor efficiencies. This has restricted the ...

  15. Selected Bibliography on Electric Motor Repair

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Bethel, Noah, P., "Fault Zone Analysis Identifies Motor Defects in Detail." Pulp & Paper, Vol. 72, No. 2, February 1998, p. 87-93. Discussion of 5 fault zones to look at...

  16. Scaling Reinforcement Learning Paradigms for Motor Control 

    E-Print Network [OSTI]

    Vijayakumar, Sethu; Peters, Jan; Schaal, Stefan

    Reinforcement learning offers a general framework to explain reward related learning in artificial and biological motor control. However, current reinforcement learning methods rarely scale to high dimensional movement systems ...

  17. Energy-efficient electric motors study

    SciTech Connect (OSTI)

    Not Available

    1981-03-23

    The study identifies the industrial decision makers, investigated the information they needed to know, how they can best be reached, and the motivating factors for purchasing energy-efficient electric motors. A survey was conducted of purchasers of integral horsepower polyphase motors. The survey measured current knowledge of and awareness of energy-efficient motors, decision-making criteria, information sources, purchase and usage patterns, and related factors. The survey data were used for the electric motor market penetration analysis. Additionally, a telephone survey was made. The study also provides analyses of distribution channels, commercialization constraints, and the impacts of government programs and rising energy prices. A description of study findings, conclusions, and recommendations is presented. Sample questionnaires and copies of letters to respondents are presented in 3 appendices. Appendices D and E contain descriptions of the methods used. (MCW)

  18. Solid State AC Motor Drives - Conservation Perspectives 

    E-Print Network [OSTI]

    Mohan, N.; Ferraro, R. J.

    1982-01-01

    Variable Frequency Solid-State Inverters: can control the speed of ac motors by producing adjustable frequency ac voltage, with an enormous potential for energy conservation in pumps and air handling systems. 3. Other Variable Frequency Drives: include...

  19. Total Energy Management in General Motors 

    E-Print Network [OSTI]

    DeKoker, N.

    1979-01-01

    This paper presents an overview of General Motors' energy management program with special emphasis on energy conservation. Included is a description of the total program organization, plant guidelines, communication and motivation techniques...

  20. Method and apparatus for large motor control

    DOE Patents [OSTI]

    Rose, Chris R. (Santa Fe, NM); Nelson, Ronald O. (White Rock, NM)

    2003-08-12

    Apparatus and method for providing digital signal processing method for controlling the speed and phase of a motor involves inputting a reference signal having a frequency and relative phase indicative of a time based signal; modifying the reference signal to introduce a slew-rate limited portion of each cycle of the reference signal; inputting a feedback signal having a frequency and relative phase indicative of the operation of said motor; modifying the feedback signal to introduce a slew-rate limited portion of each cycle of the feedback signal; analyzing the modified reference signal and the modified feedback signal to determine the frequency of the modified reference signal and of the modified feedback signal and said relative phase between said modified reference signal and said modified feedback signal; and outputting control signals to the motor for adjusting said speed and phase of the motor based on the frequency determination and determination of the relative phase.

  1. Desk for Lynn Motors Mgrs. Office 

    E-Print Network [OSTI]

    Raiford Stripling Associates, Inc.; Stripling, Raiford L.

    2011-08-29

    This paper introduces an air-conditioning water system in a hotel building in Harbin, finishes its air-conditioning energy consumption measurement in summer conditions, and presents an estimation index of performance of chiller, pump and motor...

  2. Modeling and optimization of permanent magnetic motors

    E-Print Network [OSTI]

    Pinkham, Andrew P

    2008-01-01

    This thesis develops analytic models for the prediction and optimization of radial-flux permanent magnet motor torque and efficiency. It also facilitates the design optimization of electromagnetically-powered rotorcraft ...

  3. Enforcement Letter, Lockheed Martin Idaho Technologies Company...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Company related to a Repetitive Problem with Instrument Operability at the Idaho National Engineering and Environmental Laboratory On August 4, 1998, the U.S. Department of Energy...

  4. POWER PURCHASE AGREEMENT DELMARVA POWER & LIGHT COMPANY

    E-Print Network [OSTI]

    Firestone, Jeremy

    POWER PURCHASE AGREEMENT between DELMARVA POWER & LIGHT COMPANY ("Buyer") and BLUEWATER WIND 3.5 Energy Forecasts, Scheduling and Balancing.......................................... 39 3

  5. Gov. Inslee honors Washington industrial companies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    leaders were joined by executives and staff from industrial companies, utilities and energy efficiency organizations at the ceremony. "It was rewarding to hear Gov. Inslee,...

  6. Inland Power & Light Company - Agricultural Energy Efficiency...

    Broader source: Energy.gov (indexed) [DOE]

    70% or project cost Program Info Sector Name Utility Administrator Inland Power & Light Company Website http:www.inlandpower.comcustomercarec.php?id190 State Washington...

  7. ac-driven atomic quantum motor

    E-Print Network [OSTI]

    A. V. Ponomarev; S. Denisov; P. Hanggi

    2009-06-09

    We invent an ac-driven quantum motor consisting of two different, interacting ultracold atoms placed into a ring-shaped optical lattice and submerged in a pulsating magnetic field. While the first atom carries a current, the second one serves as a quantum starter. For fixed zero-momentum initial conditions the asymptotic carrier velocity converges to a unique non-zero value. We also demonstrate that this quantum motor performs work against a constant load.

  8. Equivalent Circuit Modeling of Hysteresis Motors

    SciTech Connect (OSTI)

    Nitao, J J; Scharlemann, E T; Kirkendall, B A

    2009-08-31

    We performed a literature review and found that many equivalent circuit models of hysteresis motors in use today are incorrect. The model by Miyairi and Kataoka (1965) is the correct one. We extended the model by transforming it to quadrature coordinates, amenable to circuit or digital simulation. 'Hunting' is an oscillatory phenomenon often observed in hysteresis motors. While several works have attempted to model the phenomenon with some partial success, we present a new complete model that predicts hunting from first principles.

  9. Direct-drive field actuator motors

    DOE Patents [OSTI]

    Grahn, A.R.

    1995-07-11

    A high-torque, low speed, positive-drive field actuator motor is disclosed including a stator carrying at least one field actuator which changes in dimension responsive to application of an energy field, and at least one drive shoe movable by the dimensional changes of the field actuator to contact and move a rotor element with respect to the stator. Various embodiments of the motor are disclosed, and the rotor element may be moved linearly or arcuately. 37 figs.

  10. Direct-drive field actuator motors

    DOE Patents [OSTI]

    Grahn, Allen R. (Salt Lake City, UT)

    1995-01-01

    A high-torque, low speed, positive-drive field actuator motor including a stator carrying at least one field actuator which changes in dimension responsive to application of an energy field, and at least one drive shoe movable by the dimensional changes of the field actuator to contact and move a rotor element with respect to the stator. Various embodiments of the motor are disclosed, and the rotor element may be moved linearly or arcuately.

  11. Loose mechanochemical coupling of molecular motors

    E-Print Network [OSTI]

    Yunxin Zhang

    2011-05-05

    In living cells, molecular motors convert chemical energy into mechanical work. Its thermodynamic energy efficiency, i.e. the ratio of output mechanical work to input chemical energy, is usually high. However, using two-state models, we found the motion of molecular motors is loosely coupled to the chemical cycle. Only part of the input energy can be converted into mechanical work. Others is dissipated into environment during substeps without contributions to the macro scale unidirectional movement.

  12. Trapped field internal dipole superconducting motor generator

    DOE Patents [OSTI]

    Hull, John R. (Downers Grove, IL)

    2001-01-01

    A motor generator including a high temperature superconductor rotor and an internally disposed coil assembly. The motor generator superconductor rotor is constructed of a plurality of superconductor elements magnetized to produce a dipole field. The coil assembly can be either a conventional conductor or a high temperature superconductor. The superconductor rotor elements include a magnetization direction and c-axis for the crystals of the elements and which is oriented along the magnetization direction.

  13. Motor Thermal Control | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURING OFFICESpecialAPPENDIX F WetlandsofOpen-AccessMotor Systems Motor Systems

  14. MotorMaster+ International | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURING OFFICESpecialAPPENDIX F WetlandsofOpen-AccessMotor Systems Motor Systems

  15. Are motor proteins power strokers, Brownian motors or Brian Geislingera, Erin Darnellb, Kimberly Farrisc, and Ryoichi Kawaia

    E-Print Network [OSTI]

    Kawai, Ryoichi

    Are motor proteins power strokers, Brownian motors or both? Brian Geislingera, Erin Darnellb Baccalaureate, Birmingham, AL 35210 ABSTRACT About a decade ago Brownian motors were introduced as a possible mechanism for motor protein mobility. Since then many theoretical and experimental papers have been

  16. Halbach array DC motor/generator

    DOE Patents [OSTI]

    Merritt, Bernard T. (Livermore, CA); Dreifuerst, Gary R. (Livermore, CA); Post, Richard F. (Walnut Creek, CA)

    1998-01-01

    A new configuration of DC motor/generator is based on a Halbach array of permanent magnets. This motor does not use ferrous materials so that the only losses are winding losses and losses due to bearings and windage. An "inside-out" design is used as compared to a conventional motor/generator design. The rotating portion, i.e., the rotor, is on the outside of the machine. The stationary portion, i.e., the stator, is formed by the inside of the machine. The rotor contains an array of permanent magnets that provide a uniform field. The windings of the motor are placed in or on the stator. The stator windings are then "switched" or "commutated" to provide a DC motor/generator much the same as in a conventional DC motor. The commutation can be performed by mechanical means using brushes or by electronic means using switching circuits. The invention is useful in electric vehicles and adjustable speed DC drives.

  17. Halbach array DC motor/generator

    DOE Patents [OSTI]

    Merritt, B.T.; Dreifuerst, G.R.; Post, R.F.

    1998-01-06

    A new configuration of DC motor/generator is based on a Halbach array of permanent magnets. This motor does not use ferrous materials so that the only losses are winding losses and losses due to bearings and windage. An ``inside-out`` design is used as compared to a conventional motor/generator design. The rotating portion, i.e., the rotor, is on the outside of the machine. The stationary portion, i.e., the stator, is formed by the inside of the machine. The rotor contains an array of permanent magnets that provide a uniform field. The windings of the motor are placed in or on the stator. The stator windings are then ``switched`` or ``commutated`` to provide a DC motor/generator much the same as in a conventional DC motor. The commutation can be performed by mechanical means using brushes or by electronic means using switching circuits. The invention is useful in electric vehicles and adjustable speed DC drives. 17 figs.

  18. Molecular motors: design, mechanism and control

    E-Print Network [OSTI]

    Debashish Chowdhury

    2008-01-10

    Biological functions in each animal cell depend on coordinated operations of a wide variety of molecular motors. Some of the these motors transport cargo to their respective destinations whereas some others are mobile workshops which synthesize macromolecules while moving on their tracks. Some other motors are designed to function as packers and movers. All these motors require input energy for performing their mechanical works and operate under conditions far from thermodynamic equilibrium. The typical size of these motors and the forces they generate are of the order of nano-meters and pico-Newtons, respectively. They are subjected to random bombardments by the molecules of the surrounding aqueous medium and, therefore, follow noisy trajectories. Because of their small inertia, their movements in the viscous intracellular space exhibits features that are characteristics of hydrodynamics at low Reynold's number. In this article we discuss how theoretical modeling and computer simulations of these machines by physicists are providing insight into their mechanisms which engineers can exploit to design and control artificial nano-motors.

  19. Company number 5857955 Wellcome Trust Finance plc

    E-Print Network [OSTI]

    Rambaut, Andrew

    Company number 5857955 Wellcome Trust Finance plc Annual Report and Financial Statements Year ended 30 September 2014 #12;Company number 5857955 Wellcome Trust Finance plc Contents Page Strategic number 58579551 Wellcome Trust Finance plc Strategic Report For the year ended 30 September 2014

  20. Company number 5857955 Wellcome Trust Finance plc

    E-Print Network [OSTI]

    Rambaut, Andrew

    Company number 5857955 Wellcome Trust Finance plc Annual Report and Financial Statements Year ended 30 September 2012 #12;Company number 5857955 Wellcome Trust Finance plc Contents Page Directors Trust Finance plc Directors' Report for the year ended 30 September 2012 Report of the Directors

  1. Company number 5857955 Wellcome Trust Finance plc

    E-Print Network [OSTI]

    Rambaut, Andrew

    Company number 5857955 Wellcome Trust Finance plc Annual Report and Financial Statements Year ended 30 September 2013 #12;Company number 5857955 Wellcome Trust Finance plc Contents Page Directors Trust Finance plc Directors' Report For the year ended 30 September 2013 Report of the Directors

  2. Woodrow (Woody) K. Shiflett Chevron Products Company

    E-Print Network [OSTI]

    Krovi, Venkat

    Woodrow (Woody) K. Shiflett Chevron Products Company Moving Innovation into the Marketplace&D program, and deriving value from it, offers all the challenges of managing your family's investment study specific to a catalyst enterprise joint venture company and illustrates the value of using stage

  3. U.S. Department of Energy's Motor Challenge Program: A National...

    Office of Environmental Management (EM)

    Energy's Motor Challenge Program: A National Strategy for Energy Efficient Industrial Motor-Driven Systems U.S. Department of Energy's Motor Challenge Program: A National Strategy...

  4. Impact of California Reformulated Gasoline On Motor Vehicle Emissions. 1. Mass Emission Rates

    E-Print Network [OSTI]

    Kirchstetter, Thomas W.; Singer, Brett C.; Harley, Robert A.

    1999-01-01

    California reformulated gasoline on motor vehicle emissions.Impact of California Reformulated Gasoline OIl Motor Vehicleprogress, increased vehicle Gasoline Motor on Vehicle travel

  5. Descriptions of Motor Vehicle Collisions by Participants in Emergency Department–Based Studies: Are They Accurate?

    E-Print Network [OSTI]

    2012-01-01

    reports in determining motor vehicle crash characteristics.R ESEARCH Descriptions of Motor Vehicle Collisions byThe immediate aftermath of motor vehicle collisions. In:

  6. Motor Response Selection in Overt Sentence Production: A Functional MRI Study

    E-Print Network [OSTI]

    Tremblay, Pascale; Small, Steven L.

    2011-01-01

    The development of oral motor control and language. DownsRelative www.frontiersin.org Motor response selection instruc- tures participating in motor prepa- ration in humans:

  7. Impacts of motor vehicle operation on water quality - Clean-up Costs and Policies

    E-Print Network [OSTI]

    Nixon, Hilary; Saphores, Jean-Daniel M

    2007-01-01

    preventing water pollution from motor vehicles would be muchgroundwater pollution; motor-vehicle transportation;the environmental costs of motor vehicle transportation in

  8. Facilitation of motor and bladder function after spinal cord injury via epidural stimulation and pharmacology

    E-Print Network [OSTI]

    Gad, Parag

    2013-01-01

    lumbar spinal cord learn a motor task?. Medicine & ScienceExternal urethral sphincter motor unit recruitment patterns304. Grillner, S. (2003). The motor infrastructure: from ion

  9. The Cost of Crop Damage Caused by Ozone Air Pollution From Motor Vehicles

    E-Print Network [OSTI]

    Delucchi, Mark A.; Murphy, James; Kim, Jin; McCubbin, Donald R.

    1996-01-01

    without motor-vehicle related pollution. This diagram is forBY OZONE AIR POLLUTION FROM MOTOR VEHICLES Report #12 in thePOLLUTION FROM MOTOR VEHICLES

  10. Impacts of motor vehicle operation on water quality - Clean-up Costs and Policies

    E-Print Network [OSTI]

    Nixon, Hilary; Saphores, Jean-Daniel M

    2007-01-01

    groundwater pollution; motor-vehicle transportation;pads. Second, as motor vehicle pollution is often created apreventing water pollution from motor vehicles would be much

  11. The Cost of Reduced Visibility Due to Particulate Air Pollution From Motor Vehicles

    E-Print Network [OSTI]

    Delucchi, Mark A.; Murphy, James; McCubbin, Donald R.; Kim, Jin

    1996-01-01

    of all anthropogenic TSP pollution, and of motor-vehicle TSPPARTICULATE AIR POLLUTION FROM MOTOR VEHICLES Report #13 inPOLLUTION FROM MOTOR VEHICLES

  12. Multi-sensor Wireless System for Fault Detection in Induction Motors

    E-Print Network [OSTI]

    Tarkesh Esfahani, Ehsan

    2012-01-01

    2 Faults in Motors 2.1 Bearing Faultcombined faults in induction motors,” IEEE Transactions onV. Climente-Alarcon, “Induction motor diagnosis based on a

  13. Health Monitoring of Drive Connected Three-Phase Induction Motors ----- From Wired Towards Wireless Sensor Networks

    E-Print Network [OSTI]

    Xue, Xin

    2009-01-01

    bars in operating induction motors," Energy Conversion, IEEEbe set up between several motors in a large facility. Multi-for in-service induction motors," Industry Applications,

  14. Intake fraction of primary pollutants: motor vehicle emissions in the South Coast Air Basin

    E-Print Network [OSTI]

    Marshall, J D; Riley, W J; McKone, T E; Nazaroff, William W

    2003-01-01

    gasoline on motor vehicle emissions: 2. volatile organicgasoline on motor vehicle emissions: 1. mass emission rates.Exposure to Motor Vehicle Emissions: An Intake Fraction

  15. California Motor Vehicle Standards and Federalism: Lessons for the European Union

    E-Print Network [OSTI]

    Carlson, Ann E.

    2008-01-01

    to Reduce Motor Vehicle Emissions in Major Metropolitanin establishing motor vehicle emissions controls. The stateprocess in setting motor vehicle emissions standards has led

  16. Tampa Electric Company`s Polk Power Station IGCC project

    SciTech Connect (OSTI)

    Jenkins, S.D.

    1995-12-31

    Tampa Electric Company (TEC) is in the construction phase of its new Polk Power Station Unit No. 1. This unique project incorporates the use of Integrated Gasification Combined Cycle (IGCC) technology for electric power production. The project is being partially funded by the US Department of Energy (DOE), as part of the Clean Coal Technology Program. This will help to demonstrate this state-of-the-art technology, providing utilities with the ability to use a wide range of coals in an efficient, environmentally superior manner. During the summer of 1994, TEC began site development at the new Polk Power Station. Since that time, most of the Site work has been completed, and erection and installation of the power plant equipment is well underway. This is the first time that IGCC technology will be installed at a new unit at a greenfield site. This is a major endeavor for TEC in that Polk Unit No. 1 is a major addition to the existing generating capacity and it involves the demonstration of technology new to utility power generation. As a part of the Cooperative Agreement with the DOE, TEC will also be demonstrating the use of a new Hot Gas Clean-Up System which has a potential for greater IGCC efficiency.

  17. Cooperative molecular motors moving back and forth

    E-Print Network [OSTI]

    David Gillo; Barak Gur; Anne Bernheim-Groswasser; Oded Farago

    2009-08-05

    We use a two-state ratchet model to study the cooperative bidirectional motion of molecular motors on cytoskeletal tracks with randomly alternating polarities. Our model is based on a previously proposed model [Badoual et al., {\\em Proc. Natl. Acad. Sci. USA} {\\bf 99}, 6696 (2002)] for collective motor dynamics and, in addition, takes into account the cooperativity effect arising from the elastic tension that develops in the cytoskeletal track due to the joint action of the walking motors. We show, both computationally and analytically, that this additional cooperativity effect leads to a dramatic reduction in the characteristic reversal time of the bidirectional motion, especially in systems with a large number of motors. We also find that bidirectional motion takes place only on (almost) a-polar tracks, while on even slightly polar tracks the motion is unidirectional. We argue that the origin of these observations is the sensitive dependence of the cooperative dynamics on the difference between the number of motors typically working in and against the instantaneous direction of motion.

  18. Motor function in interpolar microtubules during metaphase

    E-Print Network [OSTI]

    J. M. Deutsch; Ian P. Lewis

    2013-07-22

    We analyze experimental observations of microtubules undergoing small fluctuations about a "balance point" when mixed in solution of two different kinesin motor proteins, KLP61F and Ncd. It has been proposed that the microtubule movement is due to stochastic variations in the densities of the two species of motor proteins. We test this hypothesis here by showing how it maps onto a one-dimensional random walk in a random environment. Our estimate of the amplitude of the fluctuations agrees with experimental observations. We point out that there is an initial transient in the position of the microtubule where it will typically move of order its own length. We compare the physics of this gliding assay to a recent theory of the role of antagonistic motors on restricting interpolar microtubule sliding of a cell's mitotic spindle during prometaphase. It is concluded that randomly positioned antagonistic motors can restrict relative movement of microtubules, however they do so imperfectly. A variation in motor concentrations is also analyzed and shown to lead to greater control of spindle length.

  19. Speed and Temperature Effects in the Energy Absorption of Axially Crushed Composite Tubes

    E-Print Network [OSTI]

    Fontana, Quentin, P V

    1990-06-05

    fibres Gr: graphite fibers (carbon fibres) ILSS: interlaminar shear strength K: Kevlar fibres KI: stress intensity factor L: longitudinal M: mass N: layer number, number of layers OD: outer diameter P: local crush load, polyester resin PET: polyethylene... , Ciba-Geigy, Moore Plastics and Ford Motor Company for suppling test materials, Apple computers for inventing the Macintosh, Beryl and Doris for being wonderful, Ph.D. Thesis: QPV Fontana; University of Cambridge; 1990 Page xiii Ms. B. Rolfe...

  20. Hydrogen powered bus

    ScienceCinema (OSTI)

    None

    2013-11-22

    Take a ride on a new type of bus, fueled by hydrogen. These hydrogen taxis are part of a Department of Energy-funded deployment of hydrogen powered vehicles and fueling infrastructure at nine federal facilities across the country to demonstrate this market-ready advanced technology. Produced and leased by Ford Motor Company , they consist of one 12- passenger bus and one nine-passenger bus. More information at: http://go.usa.gov/Tgr

  1. Improving Motor and Drive System Performance – A Sourcebook for Industry

    SciTech Connect (OSTI)

    2014-02-01

    This sourcebook outlines opportunities to improve motor and drive systems performance. The sourcebook is divided into four main sections: (1) Motor and Drive System Basics: Summarizes important terms, relationships, and system design considerations relating to motor and drive systems. (2) Performance Opportunity Road Map: Details the key components of well-functioning motor and drive systems and opportunities for energy performance opportunities. (3) Motor System Economics: Offers recommendations on how to propose improvement projects based on corporate priorities, efficiency gains, and financial payback periods. (4) Where to Find Help: Provides a directory of organizations associated with motors and drives, as well as resources for additional information, tools, software, videos, and training opportunities.

  2. The Role of Reluctance in PM Motors

    SciTech Connect (OSTI)

    Otaduy, P.J.

    2005-06-16

    The international research community has lately focused efforts on interior permanent magnet (IPM) motors to produce a traction motor for hybrid electric vehicles (HEV). One of the beneficial features of this technology is the additional torque produced by reluctance. The objective of this report is to analytically describe the role that reluctance plays in permanent magnet (PM) motors, to explore ways to increase reluctance torque without sacrificing the torque produced by the PMs, and to compare three IPM configurations with respect to torque, power, amount of magnet material required (cost), and percentage of reluctance torque. Results of this study will be used to determine future research directions in utilizing reluctance to obtain maximum torque and power while using a minimum amount of magnet material.

  3. 3000 Horsepower super conductive field acyclic motor

    SciTech Connect (OSTI)

    Marshall, R.

    1983-05-01

    A 3000 hp acyclic motor was assembled and tested utilizing superconducting field coils. The magnet assembly is designed as a quadrupole magnet, utilizing a multifilamentary niobium titanium superconductor. Each magnet coil is 18 inches in diameter and 10 inches long, and operates at rated current of 200 amperes, providing 5.8 tesla in the bore of the coils in the motor configuration. The average winding current density is 10,600 A/cm/sup 2/. The acyclic motor is of a drum-type design with liquid metal current collectors, and is designed to model full-scale machinery for ship propulsion applications. Laboratory test data verified the electrical and electromagnetic design to be within three percent of the calculated values.

  4. Post-Acquisition Integration: The Cultural Side of the Ferguson Paper Company, Inc. Acquisition of Seastrand Oil Company, Inc.

    E-Print Network [OSTI]

    Beadleston, Scott K.

    2008-12-19

    services, and expand opportunities for employees. Feedback from Ferguson Paper Company, Inc.’s 2003 acquisition of Seastrand Oil Company, Inc. (SOC)—Ferguson Paper Company, Inc.’s largest acquisition—could provide essential information to improve Ferguson...

  5. Does the location of a company’s global headquarters have an influence on its climate change awareness? 

    E-Print Network [OSTI]

    Shen, Zao

    This paper studies whether the location of a company’s global headquarters has an influence on its climate change awareness. The global headquarters hosting business elites from multinational companies are the surrogate ...

  6. Dow Chemical Company: Assessment Leads to Steam System Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Dow Chemical Company: Assessment Leads to Steam System Energy Savings in a Petrochemical Plant Dow Chemical Company: Assessment Leads to Steam System Energy Savings in a...

  7. DOE Announces First Companies to Receive Industrial Energy Efficiency...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Announces First Companies to Receive Industrial Energy Efficiency Certification DOE Announces First Companies to Receive Industrial Energy Efficiency Certification December 9,...

  8. New England Gas Company - Residential and Commercial Energy Efficiency...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    England Gas Company - Residential and Commercial Energy Efficiency Rebate Programs New England Gas Company - Residential and Commercial Energy Efficiency Rebate Programs < Back...

  9. EA-223 CMS Marketing, Services and Trading Company | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Trading Company to export electric energy to Canada. EA-223 CMS Marketing, Services and Trading Company More Documents & Publications EA-232 OGE Energy Resources Inc EA-249...

  10. Columbus Southern Power Company (doing business as AEP Ohio)...

    Open Energy Info (EERE)

    Columbus Southern Power Company (doing business as AEP Ohio) Smart Grid Demonstration Project Jump to: navigation, search Project Lead Columbus Southern Power Company (doing...

  11. Electronic Document Management System PIA, BechtelJacobs Company...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Management System PIA, BechtelJacobs Company, LLC Electronic Document Management System PIA, BechtelJacobs Company, LLC Electronic Document Management System PIA, BechtelJacobs...

  12. SEP Success Story: Louisiana Company Makes Switch to CNG, Helps...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SEP Success Story: Louisiana Company Makes Switch to CNG, Helps Transform Local Fuel Supplies SEP Success Story: Louisiana Company Makes Switch to CNG, Helps Transform Local Fuel...

  13. National Interest Security Company NISC Formerly Technology Management...

    Open Energy Info (EERE)

    Interest Security Company NISC Formerly Technology Management Services TMS Inc Jump to: navigation, search Name: National Interest Security Company (NISC) (Formerly Technology &...

  14. Researching Industries and Employers WHY RESEARCH A COMPANY?

    E-Print Network [OSTI]

    Yang, Eui-Hyeok

    Legal issues Regulatory issues Geography History Market Leaders External Resources for Researching the library Internal Resources for Researching a Specific Company Internal company information can be helpful

  15. Jiangxi Ganzhong Chlorine Caustic Company aka China Jiangxi Chlor...

    Open Energy Info (EERE)

    Jiangxi Ganzhong Chlorine Caustic Company aka China Jiangxi Chlor Alkali Manufacturing Jump to: navigation, search Name: Jiangxi Ganzhong Chlorine & Caustic Company (aka China...

  16. Soft-commutated direct current motor

    DOE Patents [OSTI]

    Hsu, J.S.

    1999-07-27

    A method and circuit is disclosed for soft-commutation of a direct current (DC) motor. An attenuation circuit is connected through auxiliary brushes A, A[prime], B and B[prime] to the commutator (16) to drain circuit from successive armature coils (15) before the main brushes (27, 28) disconnects from each of the coils (15). This prevents the spark generation that normally occurs in conventional DC motors. The attenuation circuit may also be connected before energization of the coil (15) for a soft turning on operation. 13 figs.

  17. Soft-commutated direct current motor

    DOE Patents [OSTI]

    Hsu, John S. (Oak Ridge, TN)

    1999-01-01

    A method and circuit is disclosed for soft-commutation of a direct current (DC) motor. An attenuation circuit is connected through auxiliary brushes A, A', B and B' to the commutator (16) to drain circuit from successive armature coils (15) before the main brushes (27, 28) disconnects from each of the coils (15). This prevents the spark generation that normally occurs in conventional DC motors. The attenuation circuit may also be connected before energization of the coil (15) for a soft turning on operation.

  18. Advanced motor driven clamped borehole seismic receiver

    DOE Patents [OSTI]

    Engler, B.P.; Sleefe, G.E.; Striker, R.P.

    1993-02-23

    A borehole seismic tool is described including a borehole clamp which only moves perpendicular to the borehole. The clamp is driven by an electric motor, via a right angle drive. When used as a seismic receiver, the tool has a three part housing, two of which are hermetically sealed. Accelerometers or geophones are mounted in one hermetically sealed part, the electric motor in the other hermetically sealed part, and the clamp and right angle drive in the third part. Preferably the tool includes cable connectors at both ends. Optionally a shear plate can be added to the clamp to extend the range of the tool.

  19. Case Studies of High Efficiency Electric Motor Applicability 

    E-Print Network [OSTI]

    Wagner, J. R.

    1985-01-01

    Much has been written about the advantages and disadvantages of high efficiency electric motors. For a given motor application it is possible to find literature that enables a plant engineer to make an informed choice between a standard efficiency...

  20. Electric Motor Maintenance & Repair for Long Term Efficiency 

    E-Print Network [OSTI]

    Brithinee, W. P.

    1997-01-01

    department, for example) may use microprocessor-based devices (for logic control); power electronics (for motor speed control); and specially-built electric motors. These devices may require different maintenance procedures than the equipment used in the past...

  1. Transport by molecular motors in the presence of static defects

    E-Print Network [OSTI]

    Yan Chai; Reinhard Lipowsky; Stefan Klumpp

    2009-05-07

    The transport by molecular motors along cytoskeletal filaments is studied theoretically in the presence of static defects. The movements of single motors are described as biased random walks along the filament as well as binding to and unbinding from the filament. Three basic types of defects are distinguished, which differ from normal filament sites only in one of the motors' transition probabilities. Both stepping defects with a reduced probability for forward steps and unbinding defects with an increased probability for motor unbinding strongly reduce the velocities and the run lengths of the motors with increasing defect density. For transport by single motors, binding defects with a reduced probability for motor binding have a relatively small effect on the transport properties. For cargo transport by motors teams, binding defects also change the effective unbinding rate of the cargo particles and are expected to have a stronger effect.

  2. New Energy Efficiency Standards for Electric Motors and Walk...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Motors and Walk-in Coolers and Freezers to Save on Energy Bills and Reduce Carbon Pollution New Energy Efficiency Standards for Electric Motors and Walk-in Coolers and Freezers...

  3. HMAX ®:Active Energy Control for Electric Motors | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    :Active Energy Control for Electric Motors Real-Time Sensing and Control of Electric Motor Operation Optimizes Energy Efficiency In 2011, the U.S. industrial sector consumed 3.7...

  4. Secrets of the Motor That Drives Archaea Revealed

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Secrets of the Motor That Drives Archaea Revealed Secrets of the Motor That Drives Archaea Revealed Print Thursday, 14 February 2013 00:00 An international team led by John Tainer...

  5. Modeling and characterization of a voice coil motor

    E-Print Network [OSTI]

    Brown, Ashley (Ashley A.)

    2012-01-01

    This thesis describes the development of a voice-coil motor that will allow viscous fluids to be delivered via a portable needle-free injection device. The chosen motor design features opposing magnets whose flux is channeled ...

  6. Collective alignment of polar filaments by molecular motors.

    SciTech Connect (OSTI)

    Ziebert, F.; Aranson, I. S.; Vershinin, M.; Gross, S. P.; Materials Science Division; Univ. of California at Irvine

    2009-04-01

    We study the alignment of polar biofilaments, such as microtubules and actin, subject to the action of multiple molecular motors attached simultaneously to more than one filament. Focusing on a paradigm model of only two filaments interacting with multiple motors, we were able to investigate in detail the alignment dynamics. While almost no alignment occurs in the case of a single motor, the filaments become rapidly aligned due to the collective action of the motors. Our analysis shows that the alignment time is governed by the number of bound motors and the magnitude of the motors stepping fluctuations. We predict that the time scale of alignment is in the order of seconds, much faster than that reported for passive crosslink-induced bundling. In vitro experiments on the alignment of microtubules by multiple-motor covered beads are in qualitative agreement. We also discuss another mode of fast alignment of filaments, namely the cooperation between motors and passive crosslinks.

  7. Overview: Advanced Power Electronics and Electric Motors (APEEM...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Overview: Advanced Power Electronics and Electric Motors (APEEM) R&D Overview: Advanced Power Electronics and Electric Motors (APEEM) R&D Presentation from the U.S. DOE Office of...

  8. 9.373 Somatosensory and Motor Systems, Spring 2002

    E-Print Network [OSTI]

    Bizzi, Emilio

    General principles of motor control in biological systems. Structure and function of sensory receptors. Muscle structure and reflex arcs. Spinal cord. Locomotion. Oculomotor control. Cerebellar structure and function. Motor ...

  9. Congestion Pricing and Motor Vehicle Emissions: An Initial Review

    E-Print Network [OSTI]

    Guensler, Randall; Sperling, Daniel

    1994-01-01

    CRC-APRAC On Road Vehicle Emissions Workshop. CoordinatingCoast On-Road Motor Vehicle Emission Inventory Process.W.R. Pierson. 1991. Motor Vehicle Emissions Modeling Issues.

  10. An Examination of Motor Skills in Children who Stutter 

    E-Print Network [OSTI]

    2012-10-19

    Recently, research has postulated that stuttering is a motor disorder that results from brain abnormalities within the central nervous system. Based on evidence of numerous irregularities within various motor systems, it ...

  11. Q & A with Chandra Ford

    E-Print Network [OSTI]

    UCLA Center for the Study of Women

    2013-01-01

    the multiple roles that racism plays in affecting healthinstitutional and structural racism? To answer thesean understanding of the types of racism prevalent in today’s

  12. Mike Ford | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (BillionProvedTravelInformation Resources»Jim1 ENVIRONMENTAL MANAGEMENTJuly 9,0August 7, 2008Mike

  13. Modeling Reluctance-Assisted PM Motors

    SciTech Connect (OSTI)

    Otaduy, P.J.

    2006-01-13

    This report contains a derivation of the fundamental equations used to calculate the base speed, torque delivery, and power output of a reluctance-assisted PM motor which has a saliency ratio greater than 1 as a function of its terminal voltage, current, voltage-phase angle, and current-phase angle. The equations are applied to model Motor X using symbolically-oriented methods with the computer tool Mathematica to determine: (1) the values of current-phase angle and voltage-phase angle that are uniquely determined once a base speed has been selected; (2) the attainable current in the voltage-limited region above base speed as a function of terminal voltage, speed, and current-phase angle; (3) the attainable current in the voltage-limited region above base speed as a function of terminal voltage, speed, and voltage-phase angle; (4) the maximum-power output in the voltage-limited region above base speed as a function of speed; (5) the optimal voltage-phase angle in the voltage-limited region above base speed required to obtain maximum-power output; (6) the maximum-power speed curve which was linear from rest to base speed in the current limited region below base speed; (7) the current angle as a function of saliency ratio in the current-limited region below base speed; and (8) the torque as a function of saliency ratio which is almost linear in the current-limited region below base speed. The equations were applied to model Motor X using numerically-oriented methods with the computer tool LabVIEW. The equations were solved iteratively to find optimal current and voltage angles that yield maximum power and maximum efficiency from rest through the current-limited region to base speed and then through the voltage-limited region to high-rotational speeds. Currents, voltages, and reluctance factors were all calculated and external loops were employed to perform additional optimization with respect to PM pitch angle (magnet fraction) and with respect to magnet strength. The conclusion was that the optimal-magnet fraction for Motor X is 0.72 which corresponds to a PM pitch angle of 130{sup o}, a value close to the maximum-saliency ratio in a plot of saliency ratio versus PM pitch angle. Further, the strength of Motor X magnets may be lowered to 80% of full strength without significantly impacting motor performance for PM pitch angles between the peak saliency (130{sup o}) and peak-characteristic current (160{sup o}). It is recommended that future research involve maximizing a driving-cycle-weighted efficiency based on the Federal Urban Driving Cycle and the Federal Highway Driving Cycle as criteria for selecting the final optimal-PM fraction and magnet strength for this inset PM motor. Results of this study indicate that the reduction in PM torque due to reduced-magnet fraction will be more than compensated by the reluctance torque resulting from the higher saliency ratio. It seems likely that the best overall performance will require saliency; consequently, we think the best motor will be a reluctance-assisted PM motor. This should be explored for use with other types of PM motors, such as fractional-slot motors with concentrated windings.

  14. Introducing a PMO in XYZ Company

    E-Print Network [OSTI]

    Alqahtani, Ahmed

    2013-12-20

    The purpose of this field project is to explore and build awareness about the main aspects—types, hierarchies, maturity models, and competency frameworks—related to establishing a Project Management Office (PMO) in a company. This study, inspired...

  15. Deere and Company Energy Management Program 

    E-Print Network [OSTI]

    Boyd, P. M.

    1980-01-01

    An overview of the Deere & Company energy management program is discussed. A review is made of seven key elements which have contributed to the success of the program. Installed projects and established programs are identified and discussed...

  16. Strategies of the major oil companies

    SciTech Connect (OSTI)

    Greene, W.N.

    1982-01-01

    This study identifies, documents, and analyzes the strategies of the seven largest oil companies in the world, collectively called the Majors (Exxon, Shell, Gulf, Mobil, Socal, Texaco, and BP). The period covered for each company begins at its origin, generally near 1900, and concludes in 1976. This study documents and analyzes all the major components of the long-term strategies of these companies since their origins. The policy components of each company's strategy are classified into six categories where major changes have occurred in the growth of the large-scale firm. These policy categories are geographic exapansion, size/scale of operations, vertical integration, horizontal combination, product and industry diversification, and administrative structure. With each category, policies can be compared between firms and overtime to illustrate similarities, differences, and changes in strategy. The main results are discussed.

  17. CompanieswithPNNLRoots All of these companies

    E-Print Network [OSTI]

    Eigenvector Research, Inc. ­ 1995 Encryptor, Inc. ­ 2006 Environmental Assessment Services ­ 2005 Exxon) ­ 2000 MicroStructure Technologies ­ 2005 MITAC ­ 1977 MK Altenhofen ­ 1990 mobileFOUNDATIONS, Inc. ­ 2001 Mobility Engineering Company ­ 1996 Mohr & Associates ­ 1983 Mundo Communications Network (then El

  18. Fall 2012 FUPWG Meeting Welcome: Southern Company

    Broader source: Energy.gov [DOE]

    Presentation—given at the Fall 2012 Federal Utility Partnership Working Group (FUPWG) meeting—covers the Southern Company's retail service territory, financials, customers and sales, power generation, U.S. military projects, and more.

  19. Scientific Data Processing and Visualization Software Company

    E-Print Network [OSTI]

    Delene, David J.

    Scientific Data Processing and Visualization Software Company Dr. David J. Delene Department #12;The Solution ­ Proper Software Open-source software environment designed to provide scientifically Develop prototype of the Software House. Cloud-based environment. Virtual Machines. Assessment

  20. Assessing the Energy Efficiency Potential of Industrial Motor Systems

    E-Print Network [OSTI]

    McKane, Aimee

    2014-01-01

    variable speed drive Replace pump with more energy efficient type Replace motor with more energy efficient type Initiate predictive maintenance

  1. Motor Packaging with Consideration of Electromagnetic and Material...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Documents & Publications Motor Packaging with Consideration of Electromagnetic and Material Characteristics Alnico and Ferrite Hybrid Excitation Electric Machines Wireless Charging...

  2. High Temperature, Buried Permanent Magnet, Brushless DC Motor 

    E-Print Network [OSTI]

    Zhang, Zhengxin

    2010-10-12

    Outputs, Back EMF and Phase Current in One Electric Cycle ................ 31 Fig. 3-9 Hall Effect Sensor Positions ............................................................................. 33 Fig. 3-10 State One... 1- HIGH LEVEL HALL SENSOR INPUT 0- LOW LEVEL HALL SENSOR INPUT H- HIGH OR SWITCHING MOTOR OUTPUT L- LOW MOTOR OUTPUT X- MOTOR OUTPUT IS OFF (FLOATING) In one electrical cycle, the Hall Effect sensor outputs, Back EMF, Motor Phase inputs have a...

  3. Extended cage adjustable speed electric motors and drive packages

    DOE Patents [OSTI]

    Hsu, John S. (Oak Ridge, TN)

    1999-01-01

    The rotor cage of a motor is extended, a second stator is coupled to this extended rotor cage, and the windings have the same number of poles. The motor torque and speed can be controlled by either injecting energy into or extracting energy out from the rotor cage. The motor produces less harmonics than existing doubly-fed motors. Consequently, a new type of low cost, high efficiency drive is produced.

  4. Extended cage adjustable speed electric motors and drive packages

    DOE Patents [OSTI]

    Hsu, J.S.

    1999-03-23

    The rotor cage of a motor is extended, a second stator is coupled to this extended rotor cage, and the windings have the same number of poles. The motor torque and speed can be controlled by either injecting energy into or extracting energy out from the rotor cage. The motor produces less harmonics than existing doubly-fed motors. Consequently, a new type of low cost, high efficiency drive is produced. 12 figs.

  5. The Corporate Headquarters for Alabama Power Company 

    E-Print Network [OSTI]

    Reardon, J. G.; Penuel, K. M.

    1987-01-01

    management systems are a prime objective f the company. Considerable attention has been give to the public information aspects during the desi n phase. The original equipment room layout and floor 478 ESL-IE-87-09-75 Proceedings from the Ninth Annual... tech nologies which are of mutual benefit to customer and utility. INTRODUCTION In order to consolidate all corporate head quarters personnel into a single facility, Alabama Power Company management initiated the design and construction of a...

  6. Company Template (Fixed Support) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels DataEnergy Webinar:I DueBETOofforCompany Template (Fixed Support) Company

  7. Mechanochemistry of a Viral DNA Packaging Motor , Jeffrey Moffitt1

    E-Print Network [OSTI]

    Oster, George

    Mechanochemistry of a Viral DNA Packaging Motor Jin Yu1 , Jeffrey Moffitt1 , Craig L. Hetherington1 The pentameric ATPase motor gp16 packages double-stranded DNA into the bacteriophage 29 virus capsid to explain how the packaging motor translocates the DNA in bursts of four 2.5 bp power strokes, while

  8. Renting Vehicles Renting Vehicles from MSU Motor Pool

    E-Print Network [OSTI]

    Lawrence, Rick L.

    Renting Vehicles Renting Vehicles from MSU Motor Pool Motor Pool/Transportation Services Motor Pool vehicles may ONLY be used for club-related travel). 2) Valid U.S. driver's license in good standing; 3) Completed Vehicle Use Authorization form for all drivers; and 4) Personal medical insurance

  9. VIRTUAL E-MOTOR AS A TOOL FOR THE DEVELOPMENT

    E-Print Network [OSTI]

    Noé, Reinhold

    VIRTUAL E-MOTOR AS A TOOL FOR THE DEVELOPMENT OF POWERTRAIN CONTROLLERS The introduction of electric motors in powertrains provides many possibilities to influence the vehicle driveability using the inverter. The high dynamic response of electric motors can be put to use for the compensation of powertrain

  10. Motor signs predict poor outcomes in Alzheimer disease

    E-Print Network [OSTI]

    CME Motor signs predict poor outcomes in Alzheimer disease N. Scarmeas, MD; M. Albert, PhD; J--Objective: To examine whether the presence of motor signs has predictive value for important outcomes in Alzheimer months for a total of 3,149 visit-assessments, average 5.9 per patient), the presence of motor signs

  11. Tunable-focus liquid lens controlled using a servo motor

    E-Print Network [OSTI]

    Wu, Shin-Tson

    Tunable-focus liquid lens controlled using a servo motor Hongwen Ren, David Fox, P. Andrew Anderson be controlled by a servo motor. The lens cell is composed of elastic membrane, planar glass plate, a periphery by an exterior rubber membrane. The arm of a servo motor is used to deform the elastic rubber. Squeezing

  12. MOTOR SCHEMAS IN ROBOT LEARNING Lynne E. Parker

    E-Print Network [OSTI]

    Parker, Lynne E.

    MOTOR SCHEMAS IN ROBOT LEARNING Lynne E. Parker Department of Electrical Engineering and Computer in robot learning; Macro actions in robot learning; Basis behaviors for robot learning. Definition Motor, or a task. Motor schemas in robot learning are also known as movement primitives, basis behaviors, units

  13. MOTOR VEHICLE POLICY University Policy No: AD2315

    E-Print Network [OSTI]

    Victoria, University of

    1 MOTOR VEHICLE POLICY University Policy No: AD2315 Classification: Administration Approving is to provide for the economic acquisition, maintenance, replacement and operation of motor Vehicles used for University Business. DEFINITIONS For the purposes of this policy: 2.00 Hybrid means a self propelled motor

  14. Motor primitives in vertebrates and invertebrates Tamar Flash1

    E-Print Network [OSTI]

    Hochner, Binyamin

    Motor primitives in vertebrates and invertebrates Tamar Flash1 and Binyamin Hochner2 In recent years different lines of evidence have led to the idea that motor actions and movements in both vertebrates and invertebrates are composed of elementary building blocks. The entire motor repertoire can

  15. Molecular motors interacting with their own tracks Max N. Artyomov

    E-Print Network [OSTI]

    Molecular motors interacting with their own tracks Max N. Artyomov Department of Chemistry; published 17 April 2008 Dynamics of molecular motors that move along linear lattices and interact with them exactly solvable discrete-state "burnt- bridge" models. Molecular motors are viewed as diffusing particles

  16. Interactions of semiflexible filaments and molecular motors Dmitry Karpeev,1

    E-Print Network [OSTI]

    Tsimring, Lev S.

    Interactions of semiflexible filaments and molecular motors Dmitry Karpeev,1 Igor S. Aranson,2 Lev by a molecular motor. The filaments are modeled as flexible rods, and the results are applicable to microtubules-scale structures in multifilament systems. Simulations for soft filaments show that the action of the motor can

  17. Efficiency of Brownian motors in terms of entropy production rate

    E-Print Network [OSTI]

    Feng, Jianfeng

    OFFPRINT Efficiency of Brownian motors in terms of entropy production rate Min Qian, Xuejuan Zhang) 10014 www.epljournal.org doi: 10.1209/0295-5075/84/10014 Efficiency of Brownian motors in terms a novel approach to the investigation of the efficiency of Brownian motors in the framework

  18. Bifurcation and control of chaos in Induction motor drives

    E-Print Network [OSTI]

    Krishnendu Chakrabarty; Urmila Kar

    2014-10-24

    The induction motor controlled by Indirect Field Oriented Control (IFOC) is known to have high performance and better stability. This paper reports the dynamical behavior of an indirect field oriented control (IFOC) induction motor drive in the light of bifurcation theory. The speed of high performance induction motor drive is controlled by IFOC method. The knowledge of qualitative change of the behavior of the motor such as equilibrium points, limit cycles and chaos with the change of motor parameters and load torque are essential for proper control of the motor. This paper provides a numerical approach to understand better the dynamical behavior of an indirect field oriented control of a current-fed induction motor. The focus is on bifurcation analysis of the IFOC motor, with a particular emphasis on the change that affects the dynamics and stability under small variations of Proportional Integral controller (PI) parameters, load torque and k, the ratio of the rotor time constant and its estimate etc. Bifurcation diagrams are computed. This paper also attempts to discuss various types of the transition to chaos in the induction motor. The results of the obtained bifurcation simulations give useful guidelines for adjusting both motor model and PI controller parameters. It is also important to ensure desired operation of the motor when the motor shows chaotic behavior. Infinite numbers of unstable periodic orbits are embedded in a chaotic attractor. Any unstable periodic orbit can be stabilized by proper control algorithm. The delayed feedback control method to control chaos has been implemented in this system.

  19. Enhancing the stability of kinesin motors for microscale transport applications{

    E-Print Network [OSTI]

    Hancock, William O.

    Enhancing the stability of kinesin motors for microscale transport applications{ Maruti Uppalapati714989a Biomolecular motors, such as kinesins, have great potential for micro-actuation and micro life of these motor proteins and their associated protein filaments is a barrier

  20. Molecular Motors DOI: 10.1002/anie.201006946

    E-Print Network [OSTI]

    Leigh, David A.

    Molecular Motors DOI: 10.1002/anie.201006946 Synthetic Molecular Bipeds** Emilio M. PØrez* dynamic covalent chemistry · macrocycles · molecular devices · molecular motors · photo- chemistry unawareness of Aus- tralian fauna, led Plato to famously define humans as "featherless bipeds".[1] Among motor