National Library of Energy BETA

Sample records for foote gear works

  1. Brad Foote Gear Works | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LIST OFAMERICA'SHeavy Electricals Ltd BHEL Jump to:Bottomline Energy Solutions LLCBrad

  2. Investigation into nitrided spur gears

    SciTech Connect (OSTI)

    Yilbas, B.S.; Coban, A.; Nickel, J.; Sunar, M.; Sami, M.; Abdul Aleem, B.J. [King Fahd Univ. of Petroleum and Minerals, Dhahran (Saudi Arabia)

    1996-12-01

    The cold forging method has been widely used in industry to produce machine parts. In general, gears are produced by shaping or hobbing. One of the shaping techniques is precision forging, which has several advantages over hobbing. In the present study, cold forging of spur gears from Ti-6Al-4V material is introduced. To improve the surface properties of the resulting gears, plasma nitriding was carried out. Nuclear reaction analysis was carried out to obtain the nitrogen concentration, while the micro-PIXE technique was used to determine the elemental distribution in the matrix after forging and nitriding processes. Scanning electron microscopy and x-ray powder diffraction were used to investigate the metallurgical changes and formation of nitride components in the surface region. Microhardness and friction tests were carried out to measure the hardness depth profile and friction coefficient at the surface. Finally, scoring failure tests were conducted to determine the rotational speed at which the gears failed. Three distinct regions were obtained in the nitride region, and at the initial stages of the scoring tests, failure in surface roughness was observed in the vicinity of the tip of the gear tooth. This occurred at a particular rotational speed and work input.

  3. Achumawi and Atsugewi Fishing Gear

    E-Print Network [OSTI]

    Richards Barter, Eloise

    1990-01-01

    Achumawi and Atsugewi Fishing Gear ELOISE R I C H A R D SJohn W. Hudson acquired gear used by the Achu- mawi andACHUMAWI AND ATSUGEWI FISHING GEAR Fig. 6. Fish spear (FM

  4. Gears and Belt Drives for Non-Uniform Transmission

    E-Print Network [OSTI]

    Nawratil, Georg

    Gears and Belt Drives for Non-Uniform Transmission Hellmuth Stachel Abstract Ordinarily, gears and belt drives are used for uniform transmission of rotations between parallel axes. Here we focus. Concerning belt drives, we study their relation to tooth profiles and focus on `strict' cases which work

  5. Shifting GEARS to Enable Guest-context Virtual Services Kyle C. Hale

    E-Print Network [OSTI]

    Dinda, Peter A.

    Shifting GEARS to Enable Guest-context Virtual Services Kyle C. Hale Dept. of EECS Northwestern and implementation in the context of Guest Examination and Revision Services (GEARS), a new frame- work within the Palacios VMM. We then describe two exam- ple GEARS-based services--an MPI communication acceler- ator

  6. Gearing Up for Electric Cars

    E-Print Network [OSTI]

    Sperling, Daniel

    1994-01-01

    James MacKenzie, The Keys to the Car Washing- ton. D C WorldGearing Up for Electric Cars Daniel Sperhng Reprint UCTC Noor Gearing Up for Electric Cars Daniel Sperling Department

  7. The Computational Fundamentals of Spatial Cycloidal Gearing

    E-Print Network [OSTI]

    Nawratil, Georg

    The Computational Fundamentals of Spatial Cycloidal Gearing Giorgio Figliolini, Universit`a degli 2. Reuleaux's principle of gearing in the plane 3. Reuleaux's principle of gearing in 3-space 4. Consequences for skew gearing 5. Conclusion Computational Kinematics 2009, May 6­9, Duisburg/Germany 1 #12

  8. Achumawi and Atsugewi Fishing Gear

    E-Print Network [OSTI]

    Richards Barter, Eloise

    1990-01-01

    1990). Achumawi and Atsugewi Fishing Gear ELOISE R I C H A Rmawi and Atsugewi for fishing. In 1986-87 the Pit RiverThis paper, describing the fishing equipment collected by

  9. Directional impedance of geared transmissions

    E-Print Network [OSTI]

    Wang, Albert Duan

    2012-01-01

    The purpose of this research is to develop a design tool for geared actuation systems that experience bidirectional exchange of energy with the environment. Despite the asymmetry of efficiency depending on the direction ...

  10. Abstract--Gear hobbing is a common method of manufacturing high precision involute gears. The thorough

    E-Print Network [OSTI]

    Aristomenis, Antoniadis

    Abstract-- Gear hobbing is a common method of manufacturing high precision involute gears importance in order to produce helical and spur gears as they influence the cost of the manufacturing process and the quality of the produced gear. HOB3D is a simulation code that enables users to simulate the process

  11. Spatial involute gearing -a new type of skew gears Hellmuth Stachel

    E-Print Network [OSTI]

    Nawratil, Georg

    Spatial involute gearing - a new type of skew gears Hellmuth Stachel Institute of Discrete stachel@dmg.tuwien.ac.at Abstract This is a geometric approach to spatial involute gearing which has recently been developed by Jack Phillips [4]. Due to Phillips' fundamental theorems helical involute gears

  12. Nonlinear Vibration in Gear Systems

    E-Print Network [OSTI]

    Grzegorz Litak; Michael I. Friswell

    2003-02-22

    Gear box dynamics is characterised by a periodically changing stiffness and a backlash which can lead to a loss of the contact between the teeth. Due to backlash, the gear system has piecewise linear stiffness characteristics and, in consequence, can vibrate regularly or chaoticaly depending on the system parameters and the initial conditions. We examine the possibility of a nonfeedback system control by introducing a weak resonant excitation term and through adding an additional degree of freedom to account for shaft flexibility on one side of the gearbox. We shall show that by correctly choosing the coupling values the system vibrations may be controlled.

  13. The Casimir Torque on a Cylindrical Gear

    E-Print Network [OSTI]

    Vaidya, Varun

    2013-01-01

    We utilize Effective Field Theory(EFT) techniques to calculate the casimir torque on a cylindrical gear in the presence of a polarizable but neutral object. We present results for the energy and torque as a function of angle for a gear with multiple cogs, as well as for the case of a concentric cylindrical gear.

  14. The Casimir Torque on a Cylindrical Gear

    E-Print Network [OSTI]

    Varun Vaidya

    2013-09-02

    We utilize Effective Field Theory(EFT) techniques to calculate the casimir torque on a cylindrical gear in the presence of a polarizable but neutral object. We present results for the energy and torque as a function of angle for a gear with multiple cogs, as well as for the case of a concentric cylindrical gear.

  15. The Computational Fundamentals of Spatial Cycloidal Gearing

    E-Print Network [OSTI]

    Nawratil, Georg

    The Computational Fundamentals of Spatial Cycloidal Gearing Giorgio Figliolini, Hellmuth Stachel and Jorge Angeles Abstract The tooth flanks of bevel gears with involute teeth are still cut using known. The modeling of the tooth flanks of gears with skew axes, however, still represents a challenge

  16. Powered Ankle–Foot Prosthesis Improves Walking Metabolic Economy

    E-Print Network [OSTI]

    Au, Samuel K.

    At moderate to fast walking speeds, the human ankle provides net positive work at high-mechanical-power output to propel the body upward and forward during the stance period. On the contrary, conventional ankle-foot ...

  17. COMMERCIAL FISHING VESSELS AND GEAR

    E-Print Network [OSTI]

    COMMERCIAL FISHING VESSELS AND GEAR I Mafine Biological Laboratory SEP 2 01957 WOODS HOLE, MASS. UNITED STATES DEPARTMENT OF THE INTERIOR FISH AND WILDLIFE SERVICE CIRCULAR 48 #12;CONTENTS Page Tuna Clipper 3 Tuna Bait Fishing 4 Two-Pole Tuna Fishing 4 Halibut Schooner 5 Halibut Long- Line 6 Steel Cable

  18. Gear coupling effects on rotordynamics 

    E-Print Network [OSTI]

    Clark, Robert Warren

    1988-01-01

    The forces on the rotor gear shown in Figure 5, will be equal but opposite those on the spacer. Therefore the forces on a tooth of the rotor located at 8, in spacer reference frame are: sp ace r FN rotor Ey Z. torque Y. Y, f Fig. 5. Forces on one...

  19. 679.24 Gear Limitations 50 CFR 679b24.docx 679.24 Gear Limitations Page 1 of 5

    E-Print Network [OSTI]

    § 679.24 Gear Limitations 50 CFR 679b24.docx § 679.24 Gear Limitations Page 1 of 5 Updated May 5, 2014 § 679.24 Gear limitations. Regulations pertaining to vessel and gear markings are set forth to § 300.62 of chapter III of this title. (a) Marking of hook-and-line, longline pot, and pot-and-line gear

  20. Fish Bulletin No. 72. Trawling Gear in California

    E-Print Network [OSTI]

    Scofield, W L

    1948-01-01

    F. H. G. 1948. Savings gear for otter trawl. (Mimeographed)Hatton, S. Ross 1940. Savings gear in the California drag-An account of the fishing gear of England and Wales. England

  1. Fish Bulletin No. 103. Trolling Gear In California

    E-Print Network [OSTI]

    Scofield, W L

    1955-01-01

    New features in trolling gear. Pac. Fisher. , vol. 37, no.figs. Scofield, W. L. 1921. Gear used for salmon trolling inJune. 1952. Salmon trolling gear. West. Fish. , vol. 43, no.

  2. UNCORRECTEDPROOF Diet, resource partitioning and gear vulnerability of

    E-Print Network [OSTI]

    Sorin, Eric J.

    UNCORRECTEDPROOF Diet, resource partitioning and gear vulnerability of Hawaiian jacks captured tournaments can provide synoptic data on diet and gear vulnerability that would otherwise be very dif

  3. Gear's algorithm As long as we're talking about matrix methods, let's also look at Gear's very clever

    E-Print Network [OSTI]

    Jacobs, David

    Gear's algorithm As long as we're talking about matrix methods, let's also look at Gear's very. Gear solves this by using linear algebra methods to select the columns in the most stable way elements. Since Gear's paper for details. #12;

  4. Dynamics of a Gear System with Faults in Meshing Stiffness

    E-Print Network [OSTI]

    Grzegorz Litak; Michael I. Friswell

    2004-05-23

    Gear box dynamics is characterised by a periodically changing stiffness. In real gear systems, a backlash also exists that can lead to a loss in contact between the teeth. Due to this loss of contact the gear has piecewise linear stiffness characteristics, and the gears can vibrate regularly and chaotically. In this paper we examine the effect of tooth shape imperfections and defects. Using standard methods for nonlinear systems we examine the dynamics of gear systems with various faults in meshing stiffness.

  5. Analysis of the Concentric Planetary Magnetic Gear 

    E-Print Network [OSTI]

    Frank, Nicolas Walter

    2012-07-16

    In the field of electric machine design, a trend in many applications has been to design machines with increasing torque density. When machines fail to meet torque density requirements or are simply incapable of matching load torque, gears...

  6. DESIGN OF POWER-SPLIT HYBRID VEHICLES WITH A SINGLE PLANETARY GEAR Chiao-Ting Li

    E-Print Network [OSTI]

    Peng, Huei

    DESIGN OF POWER-SPLIT HYBRID VEHICLES WITH A SINGLE PLANETARY GEAR Chiao-Ting Li Department between gears on the planetary gearset K Final drive gear ratio on output shaft R Gear radius of the ring gear S Gear radius of the sun gear e (subscript) Engine MG (subscript) Electric machine out (subscript

  7. foote-98.pdf

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorkingLosThe 26th Annual Conference onDickAlThe30/03foal | NationalAutomated

  8. Powered ankle-foot prosthesis for the improvement of amputee walking economy

    E-Print Network [OSTI]

    Au, Samuel Kwok-Wai

    2007-01-01

    The human ankle provides a significant amount of net positive work during the stance period of walking, especially at moderate to fast walking speeds. On the contrary, conventional ankle-foot prostheses are completely ...

  9. Revised/Updated Version of Gearing Up: A Guide to

    E-Print Network [OSTI]

    Tesfatsion, Leigh

    Revised/Updated Version of Gearing Up: A Guide to Installing RePast Originally Presented to gear up to program? · Look into a Java textbook (e.g., Bruce Eckel, Thinking in Java, Third Edition

  10. Hick Shifts Gears in NERSC's Storage Systems Group

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hick Shifts Gears in NERSC's Storage Systems Group Hick Shifts Gears in NERSC's Storage Systems Group, Takes on New Role October 7, 2015 JasonHick2015 Jason Hick, who has been...

  11. Taxonomy shifts up a gear: New publishing tools to accelerate biodiversity research i Taxonomy shifts up a gear

    E-Print Network [OSTI]

    Miller, Scott

    Taxonomy shifts up a gear: New publishing tools to accelerate biodiversity research i Taxonomy shifts up a gear: New publishing tools to accelerate biodiversity research Biodiversity is under severe

  12. Gears and belt drives for non-uniform transmission

    E-Print Network [OSTI]

    Nawratil, Georg

    Gears and belt drives for non-uniform transmission Hellmuth Stachel stachel of gearing 2. Non-uniform belt drives 3. On the existence of strict non-uniform belt drives EUCOMES08. Finsterwalder's principle of gearing The driving wheel 1 rotates about O1 through 1, the out-put wheel 2 rotates

  13. Energy Conserving Equations of Motion for Gear Systems

    E-Print Network [OSTI]

    Barber, James R.

    Energy Conserving Equations of Motion for Gear Systems Sejoong Oh Senior Engineer General Motors Engineering, The University of Michigan, Ann Arbor, MI A system of two meshing gears exhibits a stiffness by dynamic simulation, using a sys- tem of two involute spur gears as an example. It is shown that the two

  14. Shark Fishing Gear: A historical review by Mary Hayes Wagner

    E-Print Network [OSTI]

    Shark Fishing Gear: A historical review by Mary Hayes Wagner UNITED 5T ATE5 DEPART MENT.A OF l'O~I,a;RCI!,L Fr RERIES, Donald L. 'McKernan, Director · Shark Fishing Gear: A historical review fishing References .................... . iii Page 1 2 2 5 6 6 8 10 12 14 #12;Shark Fishing Gear

  15. Aircraft Landing Gear Thermo-Tribomechanical Model and Sensitivity Study

    E-Print Network [OSTI]

    Aircraft Landing Gear Thermo-Tribomechanical Model and Sensitivity Study Laurent Heirendt and Hugh-tribomechanical response of an aircraft landing gear shock absorber is presented. Structural damage has been reported sources and sinks in the landing gear shock absorber is developed. The thermo-tribomechanical model

  16. Gearing Up for the Common Core State Standards in Mathematics

    E-Print Network [OSTI]

    McGraw, Rebecca

    Gearing Up for the Common Core State Standards in Mathematics William McCallum The University of Arizona Tucson, 1 April 2011 William McCallumThe University of Arizona Gearing Up for the Common CoreCallumThe University of Arizona Gearing Up for the Common Core State Standards in Mathematics #12;How do we achieve

  17. Bait Loss From Halibut Longline Gear Observed From a Submersible

    E-Print Network [OSTI]

    Bait Loss From Halibut Longline Gear Observed From a Submersible WILLIAM L. HIGH Introduction Demersal longline gear is fished along the west coast of the United States for Pacific halibut is avail- able on the behavior of fish around the gear and bait, bait durability on hooks, predators other

  18. VIEWLS Final recommendations report Shift Gear to Biofuels

    E-Print Network [OSTI]

    VIEWLS Final recommendations report 1 Shift Gear to Biofuels Results and recommendations from the VIEWLS project November 2005 #12;Shift Gear to Biofuels Final report of the VIEWLS project 2 #12;Shift Gear to Biofuels Final report of the VIEWLS project 3 Preface Biofuels are fuels made from

  19. Alaska Marine Mammal Observer Program Gear Data Form Below is a summary of the fishing gear information that will be collected by Saltwater

    E-Print Network [OSTI]

    Alaska Marine Mammal Observer Program Gear Data Form Below is a summary of the fishing gear observation. Thank you for your cooperation. Gear data form information: · Tow (or lead) length, material

  20. Research Report Head Up, Foot Down

    E-Print Network [OSTI]

    Barsalou, Lawrence W.

    Research Report Head Up, Foot Down Object Words Orient Attention to the Objects' Typical Location, and object words encode these spatial associa- tions. We tested whether such object words (e.g., head, foot denoting low objects hindered target iden- tification at the bottom of the display. Thus, object words

  1. Redesigning work for gender equity and work-personal life integration

    E-Print Network [OSTI]

    Bailyn, Lotte

    This paper describes a series of intervention projects in the conditions and design of work geared to increasing gender equity in organizations and the ability of employees to integrate their working lives with their ...

  2. Journal of Materials Processing Technology 146 (2004) 213220 A simulation model of gear skiving

    E-Print Network [OSTI]

    Aristomenis, Antoniadis

    2004-01-01

    Journal of Materials Processing Technology 146 (2004) 213­220 A simulation model of gear skiving A are doubtlessly premium well designed and properly fabricated gears. The desired gear quality is performed. One of the most adopted methods in gear finishing is a variation of hobbing, the so-called gear

  3. MEM 380/800 Mechatronics 2 Mechanisms and Algorithms Lab: Lego Ratchets, Drives and Gearing

    E-Print Network [OSTI]

    Oh, Paul

    MEM 380/800 ­ Mechatronics 2 ­ Mechanisms and Algorithms Lab: Lego Ratchets, Drives and Gearing #12;Lab Experiments 1. Introduction to Lego Gears (example connections) 2. Planetary Gears (outside and inside revolutions) 3. Bevel Gears 4. Worm Gears 5. Friction Drive 6. Rack-and-Pinion 7. Putting it all

  4. Three Wave Hypothesis, Gear Model and the Rest Mass

    E-Print Network [OSTI]

    M. I. Sanduk

    2009-04-05

    Three Wave Hypothesis (TWH) is of a relativistic quantum foundation. The formulation of TWH has perfect similarities with bevel gear model. The rest mass is considered within TWH and as a consequence of similarity, between TWH and the gear model, it is found that rest mass frequency is related the frequency of touch point of the gear in relative to the large wheel. In regarding this frequency instead of the small wheel frequency, the gear model leads to four-vector representation of a particle.

  5. Fish Bulletin No. 66. Drift and Set Line Fishing Gear in California

    E-Print Network [OSTI]

    Scofield, W L

    1947-01-01

    of a standardized unit of gear. International Fisheriesaccount of the fishing gear of England and Wales. England,tubs. The so-called tub gear is still in favor with many

  6. Airborne spread of foot-and-mouth disease - model intercomparison

    SciTech Connect (OSTI)

    Gloster, J; Jones, A; Redington, A; Burgin, L; Sorensen, J H; Turner, R; Dillon, M; Hullinger, P; Simpson, M; Astrup, P; Garner, G; Stewart, P; D'Amours, R; Sellers, R; Paton, D

    2008-09-04

    Foot-and-mouth disease is a highly infectious vesicular disease of cloven-hoofed animals caused by foot-and-mouth disease virus. It spreads by direct contact between animals, by animal products (milk, meat and semen), by mechanical transfer on people or fomites and by the airborne route - with the relative importance of each mechanism depending on the particular outbreak characteristics. Over the years a number of workers have developed or adapted atmospheric dispersion models to assess the risk of foot-and-mouth disease virus spread through the air. Six of these models were compared at a workshop hosted by the Institute for Animal Health/Met Office during 2008. A number of key issues emerged from the workshop and subsequent modelling work: (1) in general all of the models predicted similar directions for 'at risk' livestock with much of the remaining differences strongly related to differences in the meteorological data used; (2) determination of an accurate sequence of events is highly important, especially if the meteorological conditions vary substantially during the virus emission period; and (3) differences in assumptions made about virus release, environmental fate, and subsequent infection can substantially modify the size and location of the downwind risk area. Close relationships have now been established between participants, which in the event of an outbreak of disease could be readily activated to supply advice or modelling support.

  7. Specific grinding energy causing thermal damage in precision gear steels 

    E-Print Network [OSTI]

    Hatathodi, Srinivas

    2002-01-01

    This project is aimed at developing a better understanding of thermal damage caused by grinding of precision gear materials and also a model to predict the onset of burn in AISI 9310 gear steel. This study is concerned with the thermal aspects...

  8. Wonder Material Brings New Light to Night-Vision Gear

    E-Print Network [OSTI]

    Sridhar, Srinivas

    Wonder Material Brings New Light to Night-Vision Gear June 2012 By Max Cacas, SIGNAL Magazine E with graphene. Page 1 of 4Wonder Material Brings New Light to Night-Vision Gear | SIGNAL Magazine 12/16/2013http

  9. Experimental evaluation of rotary engine timing gear loads

    SciTech Connect (OSTI)

    Kulina, M.R.

    1986-01-01

    The function of the timing gear of a rotary engine is to control the angular velocity of the rotor in relation to that of the crankshaft. The only load on the gear consists of the friction load due to the rotor seals, the torsional motion of the rotor and any torque developed on the rotor caused by uneven pressure distribution across the rotor flank. In the design of the gear and attachments an estimate of the loads must be made. In the case of an aircraft engine, knowing the actual loads and designing accordingly would result in the most weight effective configuration. A specially instrumented stationary gear of a Deere 0.67 liter SCORE III rotary engine was used to measure the peak torque during test stand operation. The results of the test confirm that rotor friction and torsional motion (due to drive line dynamics) produce the prime gear load below 70% design speed. At the higher engine speeds, a sub-system resonance of the rotor contributes significantly to the total load on the gear. The results of this test, together with the results of three earlier tests conducted on stationary gears are used to establish a design guide. This design guide relates the stationary gear load to crankshaft mean torque and engine displacement.

  10. Surface micromachined counter-meshing gears discrimination device

    DOE Patents [OSTI]

    Polosky, Marc A. (Albuquerque, NM); Garcia, Ernest J. (Albuquerque, NM); Allen, James J. (Albuquerque, NM)

    2000-12-12

    A surface micromachined Counter-Meshing Gears (CMG) discrimination device which functions as a mechanically coded lock. Each of two CMG has a first portion of its perimeter devoted to continuous driving teeth that mesh with respective pinion gears. Each EMG also has a second portion of its perimeter devoted to regularly spaced discrimination gear teeth that extend outwardly on at least one of three levels of the CMG. The discrimination gear teeth are designed so as to pass each other without interference only if the correct sequence of partial rotations of the CMG occurs in response to a coded series of rotations from the pinion gears. A 24 bit code is normally input to unlock the device. Once unlocked, the device provides a path for an energy or information signal to pass through the device. The device is designed to immediately lock up if any portion of the 24 bit code is incorrect.

  11. CAD-BASED CALCULATION OF CUTTING FORCE COMPONENTS IN GEAR HOBBING

    E-Print Network [OSTI]

    Aristomenis, Antoniadis

    CAD-BASED CALCULATION OF CUTTING FORCE COMPONENTS IN GEAR HOBBING BY NIKOLAOS TAPOGLOU and ARISTOMENIS ANTONIADIS Abstract. One of the most commonly used gear manufacturing process especially for external is gear hobbing. The optimisation of the process of gear hobbing is of great importance

  12. Variable gearing in pennate muscles Emanuel Azizi*, Elizabeth L. Brainerd, and Thomas J. Roberts

    E-Print Network [OSTI]

    Azizi, Manny

    Variable gearing in pennate muscles Emanuel Azizi*, Elizabeth L. Brainerd, and Thomas J. Roberts at a higher gear ratio (muscle velocity/fiber velocity). The magnitude of fiber rota- tion, and therefore gear of action. Here, we show that gear ratio is not fixed for a given muscle but decreases significantly

  13. Photonic polarization gears for ultra-sensitive angular measurements -Supplementary Information

    E-Print Network [OSTI]

    Marrucci, Lorenzo

    Photonic polarization gears for ultra-sensitive angular measurements - Supplementary Information with the single-photon photonic gear (q = 10 and m = 2q +1 = 21) for different values of initial state phase i: {0 photonic gears. The photonic gear concept based on hybrid polarization- OAM states can be adopted also

  14. Three-Dimensional Rigid Body Guidance using Gear Connections in a Robotic Manipulator with Parallel

    E-Print Network [OSTI]

    Florida, University of

    1 Three-Dimensional Rigid Body Guidance using Gear Connections in a Robotic Manipulator-circular gears into a six degree-of­freedom closed-loop spatial chain. The gear pairs are designed based. It is shown in the paper that planar gear pairs can be used if the spatial closed-loop chain is comprised

  15. PREDICTION OF THE TOOL WEAR IN GEAR HOBBING K. D. BOUZAKIS, A. ANTONIADIS AND S. KOMPOGIANNIS

    E-Print Network [OSTI]

    Aristomenis, Antoniadis

    PREDICTION OF THE TOOL WEAR IN GEAR HOBBING K. ­D. BOUZAKIS, A. ANTONIADIS AND S. KOMPOGIANNIS ABSTRACT Gear hobbing is an efficient method of gear manufacturing. Due to the fact that during the cutting generating position in all successive cutting positions along the gear width can be determined

  16. Multi-stage internal gear/turbine fuel pump

    DOE Patents [OSTI]

    Maier, Eugen; Raney, Michael Raymond

    2004-07-06

    A multi-stage internal gear/turbine fuel pump for a vehicle includes a housing having an inlet and an outlet and a motor disposed in the housing. The multi-stage internal gear/turbine fuel pump also includes a shaft extending axially and disposed in the housing. The multi-stage internal gear/turbine fuel pump further includes a plurality of pumping modules disposed axially along the shaft. One of the pumping modules is a turbine pumping module and another of the pumping modules is a gerotor pumping module for rotation by the motor to pump fuel from the inlet to the outlet.

  17. IEEE TRANSACTIONS ON NEURAL SYSTEMS AND REHABILITATION ENGINEERING, VOL. 19, NO. 4, AUGUST 2011 411 Systematic Variation of Prosthetic Foot Spring

    E-Print Network [OSTI]

    Collins, Steven H.

    --Lower-limb amputees expend more energy to walk than non-amputees and have an elevated risk of secondary dis- abilities foot, the controlled energy storage and return (CESR) foot, and observed the effect on gait. Subjects storage, energy return, and prosthetic limb COM push-off work. But metabolic energy expenditure was lowest

  18. CATCHER/PROCESSOR DCPL LONGLINE AND POT GEAR

    E-Print Network [OSTI]

    HAULED LOCATION OF SET BEGIN POSITION LATITUDE LONGITUDE Buoy or Bag # END POSITION LATITUDE LONGITUDE Buoy or Bag # BEGIN & END DEPTH (Fath.) IPHC OFFICE USE ONLY GEAR ID NUMBER OF SKATES OR POTS Set Lost

  19. On the modelling of spur and helical gear dynamic behaviour

    E-Print Network [OSTI]

    Velex, Philippe

    2012-01-01

    This chapter is aimed at introducing the fundamentals of spur and helical gear dynamics. Using three-dimensional lumped models and a thin-slice approach for mesh elasticity, the general equations of motion for single-stage spur or helical gears are presented. Some particular cases including the classic one degree-of-freedom model are examined in order to introduce and illustrate the basic phenomena. The interest of the concept of transmission errors is analysed and a number of practical considerations are deduced. Emphasis is deliberately placed on analytical results which, although approximate, allow a clearer understanding of gear dynamics than that provided by extensive numerical simulations. Some extensions towards continuous models are presented.

  20. Fact #851 December 15, 2014 The Average Number of Gears used in Transmissions Continues to Rise

    Broader source: Energy.gov [DOE]

    The number of gears in a transmission affects a vehicle's fuel economy and performance. The more gears a vehicle has, the more time the engine spends within an optimal operating range while the...

  1. UBC Social Ecological Economic Development Studies (SEEDS) Student Report SEEDS Gear Dryer

    E-Print Network [OSTI]

    UBC Social Ecological Economic Development Studies (SEEDS) Student Report SEEDS Gear Dryer Steven of a project/report". #12;i SEEDS Gear Dryer MECH 457 April 11th, 2011 Steven Baird Mike Dickson Jonathan Lau .................................................................................................................................................1 Design and Testing

  2. Catcher Vessel Longline or Pot Gear DFL Page 1 of 8 Updated August 30, 2011

    E-Print Network [OSTI]

    Catcher Vessel Longline or Pot Gear DFL Page 1 of 8 Updated August 30, 2011 Instructions for GROUNDFISH DAILY FISHING LOGBOOK (DFL) CATCHER VESSEL LONGLINE & POT GEAR RESPONSIBILITY Unless using a NMFS-approved catcher vessel longline or pot gear electronic logbook (ELB), the owner or operator of a catcher vessel 60

  3. When Skeletons Are Geared for Speed: The Morphology, Biomechanics, and Energetics of Rapid Animal Motion

    E-Print Network [OSTI]

    McHenry, Matt

    SYMPOSIUM When Skeletons Are Geared for Speed: The Morphology, Biomechanics, and Energetics that a muscular contraction displaces an appendage is determined by the gearing provided by the joints of a skeleton. Species that move rapidly commonly possess joints with relatively high gears that produce a large

  4. PHASES IN THE UNRAVELING OF THE SECRETS OF THE GEAR SYSTEM OF THE ANTIKYTHERA MECHANISM. 1

    E-Print Network [OSTI]

    PHASES IN THE UNRAVELING OF THE SECRETS OF THE GEAR SYSTEM OF THE ANTIKYTHERA MECHANISM. 1 Teun Museum in Athens. Traces of gear- wheels were clearly visible as well. The pieces turned out to be parts of the gearing system. 1 This is the text of a lecture given at the International Symposium on the History

  5. Advanced 3-Dimensional CAD Modeling of the Gear Hobbing Process V. Dimitriou 1

    E-Print Network [OSTI]

    Aristomenis, Antoniadis

    Advanced 3-Dimensional CAD Modeling of the Gear Hobbing Process V. Dimitriou 1 , A. Antoniadis 1* 1 to the realistic and accurate simulation of the gear hobbing process, an effec- tive and factual approximation is directly applied in one gear gap. Each generating position formulates a three dimensional surface path

  6. The All Terrain Bio nano Gear for Space Radiation Detection System

    E-Print Network [OSTI]

    Mavroidis, Constantinos

    The All Terrain Bio nano Gear for Space Radiation Detection System Ajay Ummat, Constantinos in real-time while an astronaut is in the mission. All Terrain Bio-nano (ATB) gear system is one the current or any other future space suits. The proposed All Terrain Bio nano (ATB) gear is one such concept

  7. MED-VaL 10, Manufacturing Science and Engineering --1999 Modeling of Gear Bobbing

    E-Print Network [OSTI]

    Aristomenis, Antoniadis

    MED-VaL 10, Manufacturing Science and Engineering -- 1999 ASME 1999 Modeling of Gear Bobbing Part models for gear hobbing were presented in the first pan of this paper. To determine the constants the prediction of the tool wear accomplishment in gear hobbing. On that account the wear development can

  8. Abstract--Whole-gear efficiency (the proportion of fish passing between

    E-Print Network [OSTI]

    278 Abstract--Whole-gear efficiency (the proportion of fish passing between the otter doors elassodon), rex sole (Glyptocephalus zachirus), and Dover sole (Microsto- mus pacificus). Whole-gear, flathead sole, and rex sole. For Dover sole, how- ever, whole-gear efficiency declined from a maximum of 33

  9. Helicopter Gear-Mesh ANC Concept Demonstration Douglas G. MacMartin1

    E-Print Network [OSTI]

    MacMynowski, Douglas G. - MacMynowski, Douglas G.

    Helicopter Gear-Mesh ANC Concept Demonstration Douglas G. MacMartin1 , Mark W. Davis1 , Charles A irritating components of helicopter interior noise comes from high frequency structure-borne gear-mesh tones generated within the transmission gear box. The challenges in the control design for this problem result

  10. Optimal Design of Motor and Gear for Drives with High Acceleration and Load Torque

    E-Print Network [OSTI]

    Noé, Reinhold

    Optimal Design of Motor and Gear for Drives with High Acceleration and Load Torque H. Grotstollen-acceleration product are transmitted unchanged by an ideal gear. At a first step those motors can be selected which offer sufficient rated power and power rate. When designing gears for each of these motors two ranges

  11. Passive Viscoelastic Constrained Layer Damping Application for a Small Aircraft Landing Gear System

    E-Print Network [OSTI]

    Kochersberger, Kevin

    Passive Viscoelastic Constrained Layer Damping Application for a Small Aircraft Landing Gear System. Ferris 9/30/2008 Blacksburg, VA Keywords: Viscoelastic, Damping, Loss Factor, Landing Gear, Aircraft #12;Passive Viscoelastic Constrained Layer Damping Application for a Small Aircraft Landing Gear System

  12. Catcher/processor Trawl Gear DCPL Page 1 of 4 Updated August 30, 2011

    E-Print Network [OSTI]

    Catcher/processor Trawl Gear DCPL Page 1 of 4 Updated August 30, 2011 Instructions for CATCHER/PROCESSOR: TRAWL GEAR DAILY CUMULATIVE PRODUCTION LOGBOOK (DCPL) RESPONSIBILITY Unless using a NMFS-approved catcher/processor trawl gear electronic logbook (ELB), the operator of a catcher

  13. Longline or pot gear DCPL Page 1 of 6 Updated August 30, 2011

    E-Print Network [OSTI]

    Longline or pot gear DCPL Page 1 of 6 Updated August 30, 2011 Instructions for CATCHER/PROCESSOR: LONGLINE & POT GEAR DAILY CUMULATIVE PRODUCTION LOGBOOK (DCPL) RESPONSIBILITY Groundfish fisheries Unless using a NMFS-approved catcher/processor longline or pot gear electronic logbook (ELB), the owner

  14. The Landing Gear Case Study in Hybrid Event-B Richard Banach

    E-Print Network [OSTI]

    Banach, Richard

    The Landing Gear Case Study in Hybrid Event-B Richard Banach School of Computer Science, University on a set of aircraft landing gear is ex- amined in Hybrid Event-B (an extension of Event-B that includes of novel coordination mechanisms. 1 Introduction This paper reports on a treatment of the landing gear case

  15. Gearing optimization We consider an optimization problem that arises in machine-tool design. It

    E-Print Network [OSTI]

    Lozin, Vadim V.

    Gearing optimization V.V. Lozin Abstract We consider an optimization problem that arises in machine. The edges of such a graph correspond to pairs of gear-wheels and the vertices stand for velocities this velocity by the central vertex of a star and call it the input vertex. By means of gear-wheels the rotation

  16. Paper ID #12625 Machine Design Experiments Using Gears to Foster Discovery Learning

    E-Print Network [OSTI]

    Nagurka, Mark L.

    Paper ID #12625 Machine Design Experiments Using Gears to Foster Discovery Learning Mr. Jonathon E Education, 2015 #12;Machine Design Experiments Using Gears to Foster Discovery Learning Abstract Experiments with mechanical systems using gears. This paper describes the experiments, which present students with a range

  17. "HAPS Part III: Gearing Outside English" ILLUSTRATED PRINCIPLES David Alciatore, PhD ("Dr. Dave")

    E-Print Network [OSTI]

    Alciatore, David G.

    "HAPS ­ Part III: Gearing Outside English" ILLUSTRATED PRINCIPLES David Alciatore, PhD ("Dr. Dave what is called "gearing" outside english (OE). The latter approach is the topic of this article between the balls. It turns out that there is an specific amount of spin, called gearing OE, that causes

  18. Aircraft landing gear greased slider bearing steady-state thermo-elastohydrodynamic concept model

    E-Print Network [OSTI]

    to take place at the lower bearing­piston sliding interface of the main landing gear (MLG) (see Fig. 1Aircraft landing gear greased slider bearing steady-state thermo-elastohydrodynamic concept model for studying the thermal behavior of a greased aircraft landing gear lower slider bearing. Structural damage

  19. Transformers: The Levers and Gears of Electricity

    Broader source: Energy.gov [DOE]

    This video is a great resource for teachers, demonstrating how transformers work. It includes experiments and demos that can be shared with students.

  20. The Effect of Slope in the Casimir Rack Gear

    E-Print Network [OSTI]

    Yuliya Voronina; Petr Silaev

    2013-09-17

    The effect of slope for the rack gear in the massless scalar field model is considered. It appears, that the slope of profile surfaces can essentially change the value of normal Casimir force, whereas average value of tangential force remains almost unchanged. At the same time we observe essential shift of maximum and minimum tangential force positions.

  1. Electromagnetic gearing applications in hybrid-electric vehicles 

    E-Print Network [OSTI]

    Sodhi, Sameer

    1994-01-01

    In this thesis, the operation of electric machines as three port devices is studied in detail. Electric machines used in this manner are referred to as electromagnetic gears in this research. All possible steady-state operating modes of these three...

  2. Deliverable 3 Turbine Installation: Site Preparation and Footings

    E-Print Network [OSTI]

    Deliverable 3 Turbine Installation: Site Preparation and Footings Crissy Field Center Wind Power sufficient for industry standard analysis. Performance of the turbines on the site will be monitored programs. Deliverable 3 Turbine Installation: Site Preparation and Footings The Deliverables and Payment

  3. Proposed amendment language for the allocation of Atka mackerel to vessels using jig gear -Amendment 34 to the Fishery

    E-Print Network [OSTI]

    Proposed amendment language for the allocation of Atka mackerel to vessels using jig gear implemented on [insert date] allocates Atka mackerel to vessels using jig gear. Annually, up to 2 percent will be allocated to vessels using jig gear in this area. 2. In section 14.4.9 Gear allocations, a new paragraph 14

  4. International Conference on Geometry and Graphics, 1-5 August, 2004, Guangzhou, China ON JACK PHILLIP'S SPATIAL INVOLUTE GEARING

    E-Print Network [OSTI]

    Nawratil, Georg

    ON JACK PHILLIP'S SPATIAL INVOLUTE GEARING Hellmuth STACHEL Vienna University of Technology, Vienna, AUSTRIA ABSTRACT This is a geometric approach to spatial involute gearing which has recently been geometric questions around this interesting type of gearing are discussed. Keywords: Spatial gearing

  5. Int. Symposium on Mechanics and Materials, May 9-14, 2010, Greece CAD-Based Simulation of Gear hobbing

    E-Print Network [OSTI]

    Aristomenis, Antoniadis

    31st Int. Symposium on Mechanics and Materials, May 9-14, 2010, Greece CAD-Based Simulation of Gear ABSTRACT Gear hobbing is a common method of manufacturing high precision involute gears. The thorough to produce helical and spur gears as they influence the cost of the manufacturing process and the quality

  6. Planipes: Mobile Foot Pressure Analysis Samuel Pfaffen, Philipp Sommer, Christian Stocker, Roger Wattenhofer, and Samuel Welten

    E-Print Network [OSTI]

    Planipes: Mobile Foot Pressure Analysis Samuel Pfaffen, Philipp Sommer, Christian Stocker, Roger, sommer, chstocke, wattenhofer, welten}@tik.ee.ethz.ch Abstract Analyzing foot pressure is helpful

  7. Structural and functional biological materials : abalone nacre, sharp materials, and abalone foot adhesion

    E-Print Network [OSTI]

    Lin, Albert Yu-Min

    2008-01-01

    Abalone foot, underwater adhesion. Submitted Meyers MA, LinAbalone foot, underwater adhesion. Submitted 5) Meyers MA,to provide molecular adhesion. This is a mechanism which

  8. Combined Effects of Gravity, Bending Moment, Bearing Clearance, and Input Torque on Wind Turbine Planetary Gear Load Sharing: Preprint

    SciTech Connect (OSTI)

    Guo, Y.; Keller, J.; LaCava, W.

    2012-09-01

    This computational work investigates planetary gear load sharing of three-mount suspension wind turbine gearboxes. A three dimensional multibody dynamic model is established, including gravity, bending moments, fluctuating mesh stiffness, nonlinear tooth contact, and bearing clearance. A flexible main shaft, planetary carrier, housing, and gear shafts are modeled using reduced degrees-of-freedom through modal compensation. This drivetrain model is validated against the experimental data of Gearbox Reliability Collaborative for gearbox internal loads. Planet load sharing is a combined effect of gravity, bending moment, bearing clearance, and input torque. Influences of each of these parameters and their combined effects on the resulting planet load sharing are investigated. Bending moments and gravity induce fundamental excitations in the rotating carrier frame, which can increase gearbox internal loads and disturb load sharing. Clearance in carrier bearings reduces the bearing load carrying capacity and thus the bending moment from the rotor can be transmitted into gear meshes. With bearing clearance, the bending moment can cause tooth micropitting and can induce planet bearing fatigue, leading to reduced gearbox life. Planet bearings are susceptible to skidding at low input torque.

  9. Photonic polarization gears for ultra-sensitive angular measurements

    E-Print Network [OSTI]

    D'Ambrosio, V; Del Re, L; Slussarenko, S; Li, Y; Kwek, L C; Marrucci, L; Walborn, S P; Aolita, L; Sciarrino, F

    2013-01-01

    A key aim in metrology is to find new physical methods for enhancing measurement precision. In this respect, quantum metrology bears great promise, but is unlikely to become practical in the near future. Its ideas can nevertheless provide inspiration for classical methods of immediate value. Here, we demonstrate the generation of NOON-like photonic states of m quanta of angular momentum, with m as high as 100, in a setup that acts as a photonic gear, converting a mechanical rotation of angle {\\theta} into an amplified rotation of the optical polarization by the angle m{\\theta}. Exploiting this effect, we demonstrate angular measurements with a precision comparable to that of the optimal quantum strategy with m photons, but robust to photon losses. The high gear ratio m translates into a similar sensitivity enhancement of optical non-contact angular measurements, boosting the current state-of-the-art by almost two orders of magnitude.

  10. Photonic polarization gears for ultra-sensitive angular measurements

    E-Print Network [OSTI]

    V. D'Ambrosio; N. Spagnolo; L. Del Re; S. Slussarenko; Y. Li; L. C. Kwek; L. Marrucci; S. P. Walborn; L. Aolita; F. Sciarrino

    2013-09-26

    Quantum metrology bears a great promise in enhancing measurement precision, but is unlikely to become practical in the near future. Its concepts can nevertheless inspire classical or hybrid methods of immediate value. Here, we demonstrate NOON-like photonic states of m quanta of angular momentum up to m=100, in a setup that acts as a "photonic gear", converting, for each photon, a mechanical rotation of an angle {\\theta} into an amplified rotation of the optical polarization by m{\\theta}, corresponding to a "super-resolving" Malus' law. We show that this effect leads to single-photon angular measurements with the same precision of polarization-only quantum strategies with m photons, but robust to photon losses. Moreover, we combine the gear effect with the quantum enhancement due to entanglement, thus exploiting the advantages of both approaches. The high "gear ratio" m boosts the current state-of-the-art of optical non-contact angular measurements by almost two orders of magnitude.

  11. In-line drivetrain and four wheel drive work machine using same

    DOE Patents [OSTI]

    Hoff, Brian (East Peoria, IL)

    2008-08-05

    A four wheel drive articulated mine loader is powered by a fuel cell and propelled by a single electric motor. The drivetrain has the first axle, second axle, and motor arranged in series on the work machine chassis. Torque is carried from the electric motor to the back differential via a pinion meshed with the ring gear of the back differential. A second pinion oriented in an opposite direction away from the ring gear is coupled to a drive shaft to transfer torque from the ring gear to the differential of the front axle. Thus, the ring gear of the back differential acts both to receive torque from the motor and to transfer torque to the forward axle. The in-line drive configuration includes a single electric motor and a single reduction gear to power the four wheel drive mine loader.

  12. The effect of foot conditions on constrained standing 

    E-Print Network [OSTI]

    Barlow, Jessica Marie

    1996-01-01

    This study was conducted to find any differences in physiological effects, subjective rankings, or discomfort with respect to foot conditions in constrained standing. Eight healthy subjects, four female and four male, ...

  13. Mag-Foot: a steel bridge inspection robot

    E-Print Network [OSTI]

    Asada, Harry

    A legged robot that moves across a steel structure is developed for steel bridge inspection. Powerful permanent magnets imbedded in each foot allow the robot to hang from a steel ceiling powerlessly. Although the magnets ...

  14. Low Wind Speed Turbine Developments in Convoloid Gearing: Final Technical Report, June 2005 - October 2008

    SciTech Connect (OSTI)

    Genesis Partners LP

    2010-08-01

    This report presents the results of a study conducted by Genesis Partners LP as part of the United States Department of Energy Wind Energy Research Program to develop wind technology that will enable wind systems to compete in regions having low wind speeds. The purpose of the program is to reduce the cost of electricity from large wind systems in areas having Class 4 winds to 3 cents per kWh for onshore systems or 5 cents per kWh for offshore systems. This work builds upon previous activities under the WindPACT project, the Next Generation Turbine project, and Phase I of the Low Wind Speed Turbine (LWST) project. This project is concerned with the development of more cost-effective gearing for speed increasers for wind turbines.

  15. 21 2008, 12:00, Idle Gear Rattle in Manual Automotive Transmissions

    E-Print Network [OSTI]

    Psarrakos, Panayiotis

    21 2008, 12:00, , (). Idle Gear Rattle in Manual Automotive Transmissions) phenomena in Automotive Powertrain Systems, dynamic analysis of medical devices and virtual prototype

  16. Fish Bulletin No. 43. The Sizes of California Sardines Caught by the Different Fishing Gear and in the Different Localities of the Monterey and San Pedro Regions

    E-Print Network [OSTI]

    California State Fisheries Laboratory

    1931-01-01

    9, 95 pp. 7. THE EFFECT OF GEAR AND LOCALITY ON THE SIZES OFuse of one type of fishing gear, nor is the fishing confinedby the different fishing gear? 2. Is there a difference in

  17. Design of a low-cost worm-gear system as teaching tool for controller design 

    E-Print Network [OSTI]

    Xu, Donghang

    1995-01-01

    In this thesis, we designed and developed a teaching tool based on a worm gear system and a general controller test environment. The experimental apparatus consists of three parts: an armature controlled DC motor with a tachometer, a worm gear set...

  18. Evaluation of environmental foot printing techniques

    E-Print Network [OSTI]

    Conway, John J., M.B.A. Massachusetts Institute of Technology

    2012-01-01

    With a growing focus on sustainability many companies are proactively assessing their product and supply chain footprints. Cisco is a leader in the ICT (Information and Communications Technology) industry and is working ...

  19. Static fishing gear, such as gill and tram-mel nets and pots or traps, are consid-

    E-Print Network [OSTI]

    247 Static fishing gear, such as gill and tram- mel nets and pots or traps, are consid- ered to be highly selective for target species. In addition, these gears might be considered to be environmentally bot- tom-fishing gears (Jennings and Kaiser, 1998). However, set nets or pots can be lost as a result

  20. Double Planetary Gear (PG) power-split hybrid powertrains have been used in production vehicles from Toyota

    E-Print Network [OSTI]

    Peng, Huei

    ABSTRACT Double Planetary Gear (PG) power-split hybrid powertrains have been used in production are power-split type [3], which utilizes one or more planetary gears as the transmission device. Toyota Prius, Ford Fusion and Chevrolet Volt are all power-split hybrid vehicles. The planetary gears

  1. Received 4 Jul 2013 | Accepted 12 Aug 2013 | Published 18 Sep 2013 Photonic polarization gears for ultra-sensitive

    E-Print Network [OSTI]

    Marrucci, Lorenzo

    gears for ultra-sensitive angular measurements Vincenzo D'Ambrosio1, Nicolo` Spagnolo1, Lorenzo Del Re1 of angular momentum up to m ¼ 100, in a setup that acts as a `photonic gear', converting, for each photon. Moreover, we combine the gear effect with the quantum enhancement due to entanglement, thus exploiting

  2. Wind-Turbine Gear-Box Roller-Bearing Premature-Failure Caused by Grain-Boundary Hydrogen Embrittlement

    E-Print Network [OSTI]

    Grujicic, Mica

    Wind-Turbine Gear-Box Roller-Bearing Premature-Failure Caused by Grain-Boundary Hydrogen, 2014) To help overcome the problem of horizontal-axis wind-turbine (HAWT) gear-box roller of the damage progression in, and the final failure of a prototypical HAWT gear-box roller-bearing inner raceway

  3. Large bearings with incorporated gears, high stiffness and precision for the Swedish Solar Telescope (SST) on La Palma

    E-Print Network [OSTI]

    Rutten, Rob

    1 Large bearings with incorporated gears, high stiffness and precision for the Swedish Solar the meshing teeth of the large gear wheel and the pinion. High preload forces to achieve line contact of the combination of bearing and gear teeth. An additional problem was the relatively thin section of the bearings

  4. Condition Assessment Survey (CAS) Program. Deficiency standards and inspections methods manual: Volume 1, 0.01 Foundations and footings

    SciTech Connect (OSTI)

    Not Available

    1993-05-01

    General information is presented for asset determinant factor/CAS repair codes/CAS cost factors; guide sheet tool & material listing; testing methods; inspection frequency; standard system design life tables; system work breakdown structure; and general system/material data. Deficiency standards and inspection methods are given for footings - spread/strip/grade beams; foundation walls; foundation dampproofing/waterproofing; excavation/backfill/ and piles & caissons.

  5. 3D FOOT DIGITIZING AND ITS APPLICATION TO FOOTWEAR FITTING

    E-Print Network [OSTI]

    Juan, Alfons

    1 3D FOOT DIGITIZING AND ITS APPLICATION TO FOOTWEAR FITTING DIGITALISATION 3D DU PIED ET LEUR and methodological difficulties. The combination of 3D scanning systems with mathematical classification techniques for a given customer. In this paper, a new approach for customized classification (assignment) of comfortable

  6. Dielectric Elastomer Generators for Foot Plantar Pressure Based Energy Scavenging

    E-Print Network [OSTI]

    Potkonjak, Miodrag

    . Dielectric Elastomers (DEs) are now gaining notice as low-cost electrostatic transducers with high energy to a need for high energy-density harvesters. DEs are a promising new class of low-cost materials capableDielectric Elastomer Generators for Foot Plantar Pressure Based Energy Scavenging Vishwa Goudar

  7. Effects of different restrained foot positions on hand force exertion capability-implications for microgravity operations 

    E-Print Network [OSTI]

    Whalen, Scott Allan

    1997-01-01

    ). With the feet immobilized to simulated the actual boundary conditions of a Portable Foot Restraint (PFR), participants performed a series of static push, pull, and lateral exertions. These exertions were performed in each of three experimental foot positions...

  8. Fig. 1: Structure of drive consisting of motor, gear and load Abstract--In this paper the product of torque and acceleration

    E-Print Network [OSTI]

    Noé, Reinhold

    MOTOR LOAD MMG, M MGL, LMM ML GEAR Fig. 1: Structure of drive consisting of motor, gear and load because both products are transmitted unchanged by an ideal gear. By use of M-product design procedure because mechanical power is transmitted unchanged by an ideal gear. Consequently each motor is suitable

  9. Influence of system architecture changes on organizational work flow and application to Geared turbofan engines

    E-Print Network [OSTI]

    James, Denman H. (Denman Halsted)

    2011-01-01

    The design and development of a gas turbine engine for aircraft applications is a highly integrated process, and requires the integration of efforts of large numbers of individuals from many design specialties. If the ...

  10. An Ankle-Foot Emulation System for the Study of Human Walking Biomechanics

    E-Print Network [OSTI]

    Herr, Hugh

    An Ankle-Foot Emulation System for the Study of Human Walking Biomechanics Samuel K. Au Peter. A lack of understanding of the ankle-foot biomechanics and the dynamic interaction between an amputee. In this paper, we present a novel ankle-foot emulator system for the study of human walking biomechanics

  11. Status Assessment of Laysan and Black-Footed Albatrosses, North Pacific Ocean, 19232005

    E-Print Network [OSTI]

    Schweik, Charles M.

    of Laysan and black-footed albatrosses. Photograph taken by Eric VanderWerf, Pacific Rim Conservation. #12Status Assessment of Laysan and Black-Footed Albatrosses, North Pacific Ocean, 1923­2005 Scientific;Status Assessment of Laysan and Black-Footed Albatrosses, North Pacific Ocean, 1923­2005 By Javier A

  12. The effects of torsional-lateral coupling on the dynamics of a gear coupled rotor 

    E-Print Network [OSTI]

    Emery, Michael Aaron

    2007-04-25

    This thesis focuses on the torsional-lateral interactions seen in gear coupled rotors. Of particular interest are cases where the torsional stiffness parameters affect the lateral critical speeds and where lateral stiffness and damping parameters...

  13. Case History of Reapplication of a 2500 KW Steam Turbine/Gear Drive Generator 

    E-Print Network [OSTI]

    Smith, S.

    1991-01-01

    OF REAPPLICATION OF A 2500 KW STEAM TURBINE/GEAR DRIVE GENERATOR SAMUEL V. SMITH Manager, Technical Sales and ~ervice Revak Turbomachinery SerVlces La Porte, Texas Abstract In today' s equipment market more and more projects are turning toward..., naphtha and a high grade of wax. The plant requires a steam turbine generator set to produce electrical power for its base load operation. This paper covers the history of how the turbine, gear and generator were selected, along with the highlights...

  14. With Chest Waders, Hip Boots, Or Rain Gear R. O. Parker Jr.

    E-Print Network [OSTI]

    in addition to the boots and rain gear (fig. 1). FEET FIRST When you fall feet first into the water, airWith Chest Waders, Hip Boots, Or Rain Gear R. O. Parker Jr. Neither chest wade rs, hip boots, nor rain ge a r will cause you to drown if you don't panic . Wade rs, the m ost dreaded of the thre e, can

  15. Fact #851: December 15, 2014 The Average Number of Gears used in Transmissions Continues to Rise – Dataset

    Broader source: Energy.gov [DOE]

    Excel file with dataset for Fact #851: December 15, 2014 The Average Number of Gears used in Transmissions Continues to Rise

  16. Prediction of sinkage depth of footings on soft marine sediments 

    E-Print Network [OSTI]

    Yen, Shihchieh

    1990-01-01

    91. 0 91. 0 91. 2 90. 9 90. 9 90. 9 90. 4 90. 6 90. 3 90. 8 91. 5 91. 4 91. 0 91. 3 Su was determined by a miniature vane rotating at 0. 0143 radians per second 30 Table 4. Soil Properties for 4-inch Diameter Footing Tests V/B Dia.... 7 0. 008 105. 7 34. 7 90. 9 103. 9 40. 0 91. 3 * Su was determined by a miniature vane rotating at 0. 0143 radians per second. one of these tests is shown in Figure 12. In comparison to the dead weight test results (Figure 13), the load versus...

  17. A study conducted on laterally loaded cylindrical footings 

    E-Print Network [OSTI]

    Koch, Kenneth Joseph

    1968-01-01

    studies have also been used to analyze the resistance (g) to overturning. R. C. Rutledge developed a nomograph that can be used to find the depth of embedment necessary to withstand applied loads. The chart is based on the results of a series of full... as compared to the diameters of concrete footings of comparable depth. Full-scale test results have also been reported by F. E. Behn( and by Nelson, Nahoney and Fryrear 10) Theory by Reese L. C. Reese studied the ultimate resistance againsr. a rigid (11...

  18. The ATS610LSA and ATS611LSB gear-tooth sensors are opti-mized Hall IC plus magnet modules that provide a user-friendly solu-

    E-Print Network [OSTI]

    Ida, Nathan

    DataSheet 27627.100 The ATS610LSA and ATS611LSB gear-tooth sensors are opti- mized Hall IC plus magnet modules that provide a user-friendly solu- tion for digital gear-tooth sensing applications. Each in conjunction with a wide variety of gear or target shapes and sizes. The ATS610LSA is designed to provide

  19. Flight Test of Active Gear-Mesh Noise Control on the S-76 Aircraft Thomas A. Millott William A. Welsh Charles A. Yoerkie Jr.

    E-Print Network [OSTI]

    MacMynowski, Douglas G. - MacMynowski, Douglas G.

    Flight Test of Active Gear-Mesh Noise Control on the S-76 Aircraft Thomas A. Millott William A noise comes from high frequency (>500Hz) structure- borne gear-mesh tones generated within system to actively cancel gear-mesh noise in the S-76 helicopter interior. The challenge in this ANC

  20. 144 IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, VOL. 47, NO. 1, JANUARY/FEBRUARY 2011 Optimal Design of Motor and Gear for Drives With

    E-Print Network [OSTI]

    Noé, Reinhold

    Design of Motor and Gear for Drives With High Acceleration by Consideration of Torque­ Speed and Torque by an ideal gear, just like in the case of the torque­speed product (i.e., mechanical power a given load with the specified torque, speed, and acceleration. The design of a gear for each suitable

  1. PARAID: The Gear-Shifting Power-Aware RAID Charles Weddle, Mathew Oldham, Jin Qian, An-I Andy Wang, Florida State University

    E-Print Network [OSTI]

    Wang, Andy

    1 PARAID: The Gear-Shifting Power-Aware RAID Charles Weddle, Mathew Oldham, Jin Qian, An-I Andy of all the disks in the array for even light loads. This paper introduces the gear-shifting Power the performance demands. Based on our 4-gear PARAID prototype, PARAID consumes 19% less power than a conventional

  2. Variable gearing in a biologically inspired pneumatic actuator array This article has been downloaded from IOPscience. Please scroll down to see the full text article.

    E-Print Network [OSTI]

    Azizi, Manny

    Variable gearing in a biologically inspired pneumatic actuator array This article has been) 026002 (8pp) doi:10.1088/1748-3182/8/2/026002 Variable gearing in a biologically inspired pneumatic. The velocity advantage resulting from dynamic changes in pennation angle can be characterized as a gear ratio

  3. The effect of ankle foot orthosis stiffness on the energy cost of walking: A simulation study

    E-Print Network [OSTI]

    Collins, Steven H.

    The effect of ankle foot orthosis stiffness on the energy cost of walking: A simulation study D by weakness of the plantar-flexor muscles. To enhance ankle push-off and to decrease the high energy cost on the amount of energy stored in the Ankle Foot Orthosis and the energy cost of walking. Methods: We developed

  4. Summary report on four foot septifoil cooling experiment

    SciTech Connect (OSTI)

    Randolph, H.W.; Collins, S.L.; Verebelyi, D.T.; Foti, D.J.

    1991-10-01

    Cooling parameters for some of the SRS reactor internal components are computed using the Transient Reactor Analysis Code, TRAC.'' In order to benchmark the code, the Safety Analysis Group of SRL requested an experiment to provide measurements of cooling parameters in a well defined physical system utilizing SRS reactor component(s). The experiment selected included a short length of septifoil with both top and bottom fittings containing five simulated control rods in an unseated'' configuration. Power level to be supplied to the rods was targeted at 2.5 kilowatts per foot. The septifoil segment was to be operated with no forced flow in order to evaluate thermal-hydraulic cooling. Parameters to be measured for comparison with code predictions were basic cooling phenomena, incidence of film boiling, thermal-hydraulic flow rate, pressure rise, and ratio of heat transfer through the wall of the assembly vs heat transfer to axial water flow through the assembly. Experimental apparatus was designed and assembled incorporating five simulated control rods four feet long, joule heated inside a five foot length of type Q'' septifoil. Water at 70 C was fed independently to the bottom inlet and along the outside of the septifoil. Water flowing along the outside of the septifoil was in confined flow and provided calorimetry to measure power flow through the septifoil housing. A shadowgraph technique was developed and used to monitor unforced flow of water pumped thermal-hydraulically through the septifoil. Electrical power of 10,000 to 70,000 watts was fed to the simulated rods from a dc power supply. Computer data acquisition was accomplished using LabView'' software programmed to match the configuration of the experiment along with scanning digital voltmeters and requisite signal sensors. Video camcorders were used to provide video records of six areas of the experiment.

  5. Summary report on four foot septifoil cooling experiment

    SciTech Connect (OSTI)

    Randolph, H.W.; Collins, S.L.; Verebelyi, D.T.; Foti, D.J.

    1991-10-01

    Cooling parameters for some of the SRS reactor internal components are computed using the Transient Reactor Analysis Code, ``TRAC.`` In order to benchmark the code, the Safety Analysis Group of SRL requested an experiment to provide measurements of cooling parameters in a well defined physical system utilizing SRS reactor component(s). The experiment selected included a short length of septifoil with both top and bottom fittings containing five simulated control rods in an ``unseated`` configuration. Power level to be supplied to the rods was targeted at 2.5 kilowatts per foot. The septifoil segment was to be operated with no forced flow in order to evaluate thermal-hydraulic cooling. Parameters to be measured for comparison with code predictions were basic cooling phenomena, incidence of film boiling, thermal-hydraulic flow rate, pressure rise, and ratio of heat transfer through the wall of the assembly vs heat transfer to axial water flow through the assembly. Experimental apparatus was designed and assembled incorporating five simulated control rods four feet long, joule heated inside a five foot length of type ``Q`` septifoil. Water at 70 C was fed independently to the bottom inlet and along the outside of the septifoil. Water flowing along the outside of the septifoil was in confined flow and provided calorimetry to measure power flow through the septifoil housing. A shadowgraph technique was developed and used to monitor unforced flow of water pumped thermal-hydraulically through the septifoil. Electrical power of 10,000 to 70,000 watts was fed to the simulated rods from a dc power supply. Computer data acquisition was accomplished using ``LabView`` software programmed to match the configuration of the experiment along with scanning digital voltmeters and requisite signal sensors. Video camcorders were used to provide video records of six areas of the experiment.

  6. Analysis of Oil Lubricated Thrust Collars for Application in Integrally Geared Compressors 

    E-Print Network [OSTI]

    Cable, Travis Alexander

    2015-07-15

    coefficients are determined. In a lubricated thrust collar and bull gear, a hydrodynamic pressure builds in the lower half of the lubricated zone and lubricant cavitation occurs in the upper half. The minimum film thickness and peak pressure in the lubricated...

  7. Encounters of Hawaiian Monk Seals With Fishing Gear at Lisianski Island, 1982

    E-Print Network [OSTI]

    Encounters of Hawaiian Monk Seals With Fishing Gear at Lisianski Island, 1982 JOHN R. HENDERSON and figures. 46(3) ner and McCann, 1982). Hawaiian monk seals, Monachus schauinslandi, are also known, and K. W. Kenyon. 1978. Hawaiian monk seal (Monachus schauinslandl) survey of the Northwestern (Leeward

  8. The Cost of Interrupted Work: More Speed and Stress Gloria Mark

    E-Print Network [OSTI]

    Madiraju, Praveen

    , systems might be designed to help colleagues gear their interruptions to others so as match the context discuss implications for how system design can support interrupted work. Author Keywords Multi as the task at-hand are beneficial, then this has important implications for system design. For example

  9. Optimizingof Tangential Tool Shift in Gear Hobbing" Prof. Dr.-lng. habil. K.-D. Bouzakis (I), Aristoteles Universityof Thessaloniki;

    E-Print Network [OSTI]

    Aristomenis, Antoniadis

    Optimizingof Tangential Tool Shift in Gear Hobbing" Prof. Dr.-lng. habil. K.-D. Bouzakis (I), Aristoteles Universityof Thessaloniki; Assistant Prof. Dr.-lng. A. Antoniadis, Technological Educational

  10. Beam-beam Effects of 'Gear-changing' in Ring-Ring Colliders

    E-Print Network [OSTI]

    Hao, Yue; Ptitsyn, Vadim

    2013-01-01

    In ring-ring colliders, the collision frequency determines the bunch structures, e.g. the time between the bunches in both rings should be identical. Because of relatively low relativistic speed of the hadron beam in sub-TeV hadron-hadron- and electron-ions-colliders, scanning the hadron beam's energy would require either a change in the circumference of one of the rings, or a switching of the bunch (harmonic) number in a ring. The later would cause so-called 'gear-changing', i.e. the change of the colliding bunches turn by turn. In this article, we study the difficulties in beam dynamics in this 'gear-changing' scheme.

  11. A study of factors affecting foot movement time in a braking maneuver 

    E-Print Network [OSTI]

    Berman, Andrea Helene

    1994-01-01

    The nature of foot movement time (MT) in an actual braking maneuver and in a stationary vehicle was investigated regarding the effects of age and gender of the driver and nature of the stimulus to which the driver was ...

  12. Forty-Six-Foot Tall Needle Sculpture Rises Over Arts Quad > EMC2...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A 46-foot tall blue, needle-shaped sculpture. The structure - tilted "A Needle Woman: Galaxy was a Memory, Earth is a Souvenir" - is part of Cornell's Council for the Arts'...

  13. Analysis of surface integrity of grinded gears using Barkhausen noise analysis and x-ray diffraction

    SciTech Connect (OSTI)

    Vrkoslavová, Lucie; Louda, Petr; Malec, Ji?i

    2014-02-18

    The contribution is focused to present results of study grinded gears made of 18CrNiMo7-6 steel used in the wind power plant for support (service) purposes. These gears were case-hardened due to standard hard case and soft core formation. This heat treatment increases wear resistance and fatigue strength of machine parts. During serial production some troubles with surface integrity have occurred. When solving complex problems lots of samples were prepared. For grinding of gears were used different parameters of cutting speed, number of material removal and lots from different subsuppliers. Material characterization was carried out using Barkhausen noise analysis (BNA) device; X-ray diffraction (XRD) measurement of surface residual stresses was done as well. Depth profile of measured characteristics, e.g. magnetoelastic parameter and residual stress was obtained by step by step layers' removing using electrolytic etching. BNA software Viewscan was used to measure magnetizing frequency sweep (MFS) and magnetizing voltage sweep (MVS). Scanning of Magnetoelastic parameter (MP) endwise individual teeth were also carried out with Viewscan. These measurements were done to find problematic surface areas after grinding such as thermal damaged locations. Plots of the hardness and thickness of case-hardened layer on cross sections were measurered as well. Evaluation of structure of subsurface case-hardened layer and core was made on etched metallographic patterns. The aim of performed measurements was to find correlation between conditions of grinding, residual stresses and structural and magnetoelastic parameters. Based on correlation of measured values and technological parameters optimizing the production of gears will be done.

  14. The Dynamical and Chemical Evolution of Dwarf Spheroidal Galaxies with GEAR

    E-Print Network [OSTI]

    Revaz, Yves

    2011-01-01

    We present a fully parallel chemo-dynamical Tree/SPH code, GEAR, which allows to perform high resolution simulations with detailed chemical diagnostics. Starting from the public version of Gadget-2, we included the complex treatment of the baryon physics: gas cooling, star formation law, chemical evolution and supernovae feedback. We qualified the performances of GEAR with the case of dSph galaxies. GEAR conserves the total energy budget of the systems to better than 5% over 14Gyr and proved excellent convergence of the results with numerical resolution. We showed that models of dSphs in a static Euclidean space, where the expansion of the universe is neglected are valid. In addition, we tackled some of the existing open questions in the field, like the stellar mass fraction of dSphs and its link with the predicted dark matter halo mass function, the effect of the supernova feedback, the spatial distribution of the stellar populations, and the origin of the diversity in star formation histories and chemical a...

  15. An Experimental and Theoretical Investigation of Micropiiting in Wind Turbine Gears and Bearings

    SciTech Connect (OSTI)

    Kahraman, Ahmet

    2012-03-28

    In this research study, the micro-pitting related contact failures of wind turbine gearbox components were investigated both experimentally and theoretically. On the experimental side, a twin-disk type test machine was used to simulate wind turbine transmission contacts in terms of their kinematic (rolling and sliding speeds), surface roughnesses, material parameters and lubricant conditions. A test matrix that represents the ranges of contact conditions of the wind turbine gear boxes was defined and executed to bring an empirical understanding to the micro-pitting problem in terms of key contact parameters and operating conditions. On the theoretical side, the first deterministic micro-pitting model based on a mixed elastohydrodynamic lubrication formulations and multi-axial near-surface crack initiation model was developed. This physics-based model includes actual instantaneous asperity contacts associated with real surface roughness profiles for predicting the onset of the micro-pit formation. The predictions from the theoretical model were compared to the experimental data for validation of the models. The close agreement between the model and measurements was demonstrated. With this, the proposed model can be deemed suitable for identifying the mechanisms leading to micro-pitting of gear and bearing surfaces of wind turbine gear boxes, including all key material, lubricant and surface engineering aspects of the problem, and providing solutions to these micro-pitting problems.

  16. The conic-gearing image of a complex number and a spinor-born surface geometry

    E-Print Network [OSTI]

    Alexander P. Yefremov

    2011-02-03

    Quaternion (Q-) mathematics formally contains many fragments of physical laws; in particular, the Hamiltonian for the Pauli equation automatically emerges in a space with Q-metric. The eigenfunction method shows that any Q-unit has an interior structure consisting of spinor functions; this helps us to represent any complex number in an orthogonal form associated with a novel geometric image (the conic-gearing picture). Fundamental Q-unit-spinor relations are found, revealing the geometric meaning of spinors as Lam\\'e coefficients (dyads) locally coupling the base and tangent surfaces.

  17. Design and Implementation of Prosthetic Arm using Gear Motor Control Technique with Appropriate Testing

    E-Print Network [OSTI]

    Neogi, Biswarup; Ghosal, Soumya; Das, Achintya; Tibarewala, D N

    2011-01-01

    Any part of the human body replication procedure commences the prosthetic control science. This paper highlights the hardware design technique of a prosthetic arm with implementation of gear motor control aspect. The prosthetic control arm movement has been demonstrated in this paper applying processor programming and with the successful testing of the designed prosthetic model. The architectural design of the prosthetic arm here has been replaced by lighter material instead of heavy metal, as well as the traditional EMG (electro myographic) signal has been replaced by the muscle strain.

  18. Gearing up for annual robotics competition | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation Current HABFESOpportunities Nuclearlong version)shortGate Hours &Gearing up

  19. Hick Shifts Gears in NERSC's Storage Systems Group, Takes on New Role

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation CurrentHenry Bellamy, Ph.D. Title: Professor - Research PXHick Shifts Gears in

  20. Performance requirements and case histories for a specialized industrial gear lubricant for use in underground coal mining

    SciTech Connect (OSTI)

    Hart, M.D.

    1993-12-31

    The recent release of a new gear lubricant specification by an original equipment manufacturer from the mining industry is an indication that the need for a new specification is recognized in other segments of the mining industry. unfortunately, this new specification appears too ambitious in at least one of it`s performance requirements and not ambitious enough in some of it`s other requirements. This new specification requires that the lubricant be able to emulsify 50% (by volume) water for at least 24 hours. It is technically difficult to achieve this goal and at the same time retain some of the other properties that are essential to the success of a specialized lubricant for underground mining applications. The ability to maintain excellent anti-wear and extreme pressure performance even when water and solid contamination is present is one such property. This effort to incorporate contamination tolerance into a gear lubricant specification should be applauded but it also needs to be recognized that any new gear lubricant specification that attempts to do so should be based on and evolved from existing specialized gear lubricants. A review of the data presented leads to the conclusion that there needs to be a better benchmark available to insure that the enclosed gear lubricants used in underground mining will provide the best service possible. It is more than a matter of upgrading the US Steel 224 lubricant specification. A new enclosed gear lubricant benchmark specification which deals with the important contamination issues that are found in the mining environment is needed.

  1. The design, construction, and calibration of a machine to measure the static strength and deflection of spur gear teeth 

    E-Print Network [OSTI]

    Harrelson, Ersel

    1949-01-01

    1 v"r ~ rm and the length of the 1=ver were known. As an example, the calculat&on of the net load & er inch on the gear for reading no. 3, table III, was rerfnrmed in the following manner: Fg ~ the force on the gear if there were no fr& ction.... The remainder of the m~chine is fastened to these pieces. These cross rieces are bolted to four pedestals (A, Figure I), which . 'n turn are bolted to a rigid base. Two similar pieces of" angle iron, I and Jp sBI we as connecting members for the outs1de...

  2. Work Plan

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking WithTelecentricNCubictheThepresented in the7 Table7Work &Work Plan

  3. Collected Works

    E-Print Network [OSTI]

    Turner, Lance

    2011-04-26

    The collection of work presented here illustrates the constant struggle individuals face in understanding the repercussions of their past, the weight of their decisions in the present moment, and the possibilities of the ...

  4. The influence of energy storage and return foot stiffness on walking mechanics and muscle activity in below-knee amputees

    E-Print Network [OSTI]

    The influence of energy storage and return foot stiffness on walking mechanics and muscle activity feet have been developed to minimize these asymmetries by utilizing elastic energy storage and return the influence of foot stiffness on kinematics, kinetics, muscle activity, prosthetic energy storage and return

  5. Product (a) Type (b) Time of Harvest Gear Code (c) Area of catch (d) Net Weight No. of Fish F/FR RD/GG/DR/FL/OT (mm/yy) (kg) (when RD, GG or DR)

    E-Print Network [OSTI]

    Product (a) Type (b) Time of Harvest Gear Code (c) Area of catch (d) Net Weight No. of Fish F/FR RD=Other (describe the type of product; ____________________.) (c): If the Gear Code is OT, describe the type of gear

  6. Driving Low-Power Wearable Systems with an Adaptively-Controlled Foot-Strike Scavenging Platform

    E-Print Network [OSTI]

    Potkonjak, Miodrag

    with an ambient source of energy in mobile contexts. The hu- man body offers a myriad of sources to parasitically and mass of transducer to produce a given amount of energy. While competing tech- nologies transduce as a means to scavenge energy from foot-strikes and power wearable systems. While they exhibit large energy

  7. Flat-Foot Dynamic Walking via Human-Inspired Controller Design 

    E-Print Network [OSTI]

    Ma, Wenlong

    2014-05-05

    This thesis describes a torque control scheme unifying feedback PD control and feed-forward impedance control to realize human-inspired walking on a novel planar footed bipedal robot: AMBER2. It starts with high fidelity modeling of the robot...

  8. Shape&Roll Foot Jr. Rehabilitation Engineering Research Center for Prosthetics and Orthotics

    E-Print Network [OSTI]

    Chisholm, Rex L.

    Shape&Roll Foot Jr. Rehabilitation Engineering Research Center for Prosthetics and Orthotics on Disability and Rehabilitation Research (NIDRR) of the U.S. Department of Education under Grant No. H133E in Prosthetics and Orthotics, February 28, 2006. Northwestern University Rehabilitation Engineering Research

  9. Interfacing to the Foot: Apparatus and Applications Joseph A. Paradiso, Kai-Yuh Hsiao, Ari Benbasat

    E-Print Network [OSTI]

    with piezoelectric taps at toe and heel, medical applications measured only pressure distributions, athletic footwearInterfacing to the Foot: Apparatus and Applications Joseph A. Paradiso, Kai-Yuh Hsiao, Ari Benbasat, telemetered package) and expressive applications of wearable computing, we have developed the world's most

  10. The high-foot implosion campaign on the National Ignition Facility

    SciTech Connect (OSTI)

    Hurricane, O. A., E-mail: hurricane1@llnl.gov; Callahan, D. A.; Casey, D. T.; Dewald, E. L.; Dittrich, T. R.; Döppner, T.; Barrios Garcia, M. A.; Hinkel, D. E.; Berzak Hopkins, L. F.; Kervin, P.; Pape, S. Le; Ma, T.; MacPhee, A. G.; Milovich, J. L.; Moody, J.; Pak, A. E.; Patel, P. K.; Park, H.-S.; Remington, B. A.; Robey, H. F. [Lawrence Livermore National Laboratory, Livermore, California 94551 (United States); and others

    2014-05-15

    The “High-Foot” platform manipulates the laser pulse-shape coming from the National Ignition Facility laser to create an indirect drive 3-shock implosion that is significantly more robust against instability growth involving the ablator and also modestly reduces implosion convergence ratio. This strategy gives up on theoretical high-gain in an inertial confinement fusion implosion in order to obtain better control of the implosion and bring experimental performance in-line with calculated performance, yet keeps the absolute capsule performance relatively high. In this paper, we will cover the various experimental and theoretical motivations for the high-foot drive as well as cover the experimental results that have come out of the high-foot experimental campaign. At the time of this writing, the high-foot implosion has demonstrated record total deuterium-tritium yields (9.3×10{sup 15}) with low levels of inferred mix, excellent agreement with implosion simulations, fuel energy gains exceeding unity, and evidence for the “bootstrapping” associated with alpha-particle self-heating.

  11. RECORDING THE REGION OF INTEREST FROM FLYCAM PANORAMIC VIDEO Xinding Sun*, Jonathan Foote+

    E-Print Network [OSTI]

    California at Santa Barbara, University of

    RECORDING THE REGION OF INTEREST FROM FLYCAM PANORAMIC VIDEO Xinding Sun*, Jonathan Foote+ , Don tracking and recording video is presented. The proposed method is based on the FlyCam system [4], which stationary cameras. The method integrates tracking and recording processes, and targets applications

  12. The effect of bot fly larvae on reproduction in white-footed mice, Peromyscus leucopus

    E-Print Network [OSTI]

    Timm, Robert M.; Cook, Edwin F.

    1979-01-01

    The effect of bot fly larvae on reproduction in white-footed mice (Peromyscus leucopus noveboracensis) was determined from a sample of 1050 mice that were snap-trapped over a 2-year period in E-central Minnesota. Bot fly larvae (Cuterebra...

  13. thesis work

    E-Print Network [OSTI]

    Toback, David

    thesis work Aggie student given award for thesis on particle physics&M. Wagner accepted the Universities Research Association (URA) Thesis Award June 4 for his doctoral,500 award, is given each year to the most outstanding doctoral thesis written on research conducted

  14. IMPEE PhD Opportunity Project title: LightFoot PhD A PhD Investigation Lightning Protection of HV Overhead Lines with Non-Ideal

    E-Print Network [OSTI]

    Greenaway, Alan

    IMPEE PhD Opportunity Project title: LightFoot PhD ­ A PhD Investigation Lightning Protection of HV.swingler@hw.ac.uk Abstract LightFoot PhD ­ A PhD Investigation Lightning Protection of HV Overhead Lines with Non-Ideal Tower Footing Resistance funded by SSE. The LightFoot PhD project takes a fresh approach at adding

  15. Non-contact gears: II. Casimir torque between concentric corrugated cylinders for the scalar case

    E-Print Network [OSTI]

    Ines Cavero-Pelaez; Kimball A. Milton; Prachi Parashar; K. V. Shajesh

    2008-07-03

    The Casimir interaction between two concentric corrugated cylinders provides the mechanism for non-contact gears. To this end, we calculate the Casimir torque between two such cylinders, described by $\\delta$-potentials, which interact through a scalar field. We derive analytic expressions for the Casimir torque for the case when the corrugation amplitudes are small in comparison to the corrugation wavelengths. We derive explicit results for the Dirichlet case, and exact results for the weak coupling limit, in the leading order. The results for the corrugated cylinders approach the corresponding expressions for the case of corrugated parallel plates in the limit of large radii of cylinders (relative to the difference in their radii) while keeping the corrugation wavelength fixed.

  16. Three-dimensional microelectromechanical tilting platform operated by gear-driven racks

    DOE Patents [OSTI]

    Klody, Kelly A.; Habbit, Jr., Robert D.

    2005-11-01

    A microelectromechanical (MEM) tiltable-platform apparatus is disclosed which utilizes a light-reflective platform (i.e. a micromirror) which is supported above a substrate by flexures which can be bent upwards to tilt the platform in any direction over an angle of generally .+-.10 degrees using a gear-driven rack attached to each flexure. Each rack is driven by a rotary microengine (i.e. a micromotor); and an optional thermal actuator can be used in combination with each microengine for initially an initial uplifting of the platform away from the substrate. The MEM apparatus has applications for optical switching (e.g. between a pair of optical fibers) or for optical beam scanning.

  17. Working Draft

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal Gas &SCE-Sessions |discussed how saving energy5 Worker Righs, Issue 2 Working Capital

  18. Interactions of foot-and-mouth disease virus with cells in organised lymphoid tissue influence innate and adaptive immune responses 

    E-Print Network [OSTI]

    Juleff, Nicholas Dylan

    2009-01-01

    Foot-and-mouth disease virus (FMDV) is one of the most contagious viruses of animals and is recognised as the most important constraint to international trade in animals and animal products. Two fundamental problems remain ...

  19. Journal of Biomedical Optics 16(2), 026009 (February 2011) Assessing diabetic foot ulcer development risk with

    E-Print Network [OSTI]

    Pilon, Laurent

    Journal of Biomedical Optics 16(2), 026009 (February 2011) Assessing diabetic foot ulcer Science Biomedical Inter-Department Program, Los Angeles, California 90095-1597 bUCLA/Olive View Medical

  20. Strategies for using electromyographic signals to control ankle torque in an active joint brace for alleviating drop-foot gait

    E-Print Network [OSTI]

    Lin, Elizabeth C

    2006-01-01

    This thesis describes the efforts to develop control strategies that use EMG signals from the anterior tibialis muscle to control ankle torque in an active ankle-foot orthosis. This would ultimately help rehabilitate persons ...

  1. Foot Bridge 

    E-Print Network [OSTI]

    Unknown

    2011-09-05

    The objective of this thesis is to determine fatigue stresses in the stringer to floor beam connections of through plate girder (TPG) and through truss (TT) bridges in order to predict failure. Field observations by the Association of American...

  2. Three-Dimensional Rotational Angiography of the Foot in Critical Limb Ischemia: A New Dimension in Revascularization Strategy

    SciTech Connect (OSTI)

    Jens, Sjoerd; Lucatelli, Pierleone; Koelemay, Mark J. W.; Marquering, Henk A. Reekers, Jim A.

    2013-06-15

    Purpose. To evaluate the additional value of three-dimensional rotational angiography (3DRA) of the foot compared with digital subtraction angiography (DSA) in patients with critical limb ischemia (CLI). Technique. For 3DRA, the C-arm was placed in the propeller position with the foot in an isocentric position. The patient's unaffected foot was positioned in a footrest outside the field of view. For correct timing of 3DRA, the delay from contrast injection in the popliteal artery at the level of knee joint to complete pedal arterial enhancement was assessed using DSA. With this delay, 3DRA was started after injection of 15 ml contrast. Imaging of the 3DRA could directly be reconstructed and visualized.Materials and MethodsPatients undergoing 3DRA of the foot were prospectively registered. DSA and 3DRA images were scored separately for arterial patency and presence of collaterals. Treatment strategies were proposed based on DSA with and without the availability of 3DRA. Results. Eleven patients underwent 3DRA of the foot. One 3DRA was not included because the acquisition was focused on the heel instead of the entire foot. Diagnostic quality of 3DRA was good in all ten patients. 3DRA compared with DSA showed additional patent arteries in six patients, patent plantar arch in three patients, and collaterals between the pedal arteries in five patients. Additional information from 3DRA resulted in a change of treatment strategy in six patients. Conclusion, 3DRA of the foot contains valuable additional real-time information to better guide peripheral vascular interventions in patients with CLI and nonhealing tissue lesions.

  3. Load tests on five large spread footings on sand and evaluation of prediction methods 

    E-Print Network [OSTI]

    Gibbens, Robert Melvin

    1995-01-01

    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cross-Hole Wave Tests. Dilatometer Tests . . Borehole Shear Tests. . Step Blade Tests. 5 9 17 22 28 34 34 39 45 54 56 64 64 LOAD TEST SETUP 3. 1 3. 2 3. 3 3. 4 3. 5 3. 6 General Setup. Spread Footing Construction Reaction Shaft... INVOLVED Mr. Mike Adams Dr. Allan Lutenegger Dr. Don Degroot Buchanan/Soil Mechanics Dr. Derek Morris Mr. Tony Yen Mr. John Del hia PiezoCone Penetration Test Dilatometer Tests Dilatometer Test w/Thrust Measurements Pressuremeter Tests Step...

  4. Foot Drop after Ethanol Embolization of Calf Vascular Malformation: A Lesson on Nerve Injury

    SciTech Connect (OSTI)

    Tay, Vincent Khwee-Soon; Mohan, P. Chandra; Liew, Wendy Kein Meng; Mahadev, Arjandas; Tay, Kiang Hiong

    2013-08-01

    Ethanol is often used in sclerotherapy to treat vascular malformations. Nerve injury is a known complication of this procedure. However, the management of this complication is not well described in literature. This case describes a 10-year-old boy with a slow flow vascular malformation in the right calf who underwent transarterial ethanol embolization following prior unsuccessful direct percutaneous sclerotherapy. The development of a dense foot drop that subsequently recovered is described, and the management of this uncommon but distressful complication is discussed.

  5. Multiplexed Molecular Assays for Rapid Rule-Out of Foot-and-Mouth Disease

    SciTech Connect (OSTI)

    Lenhoff, R; Naraghi-Arani, P; Thissen, J; Olivas, J; Carillo, C; Chinn, C; Rasmussen, M; Messenger, S; Suer, L; Smith, S M; Tammero, L; Vitalis, E; Slezak, T R; Hullinger, P J; Hindson, B J; Hietala, S; Crossley, B; Mcbride, M

    2007-06-26

    A nucleic acid-based multiplexed assay was developed that combines detection of foot-and-mouth disease virus (FMDV) with rule-out assays for two other foreign animal diseases and four domestic animal diseases that cause vesicular or ulcerative lesions indistinguishable from FMDV infection in cattle, sheep and swine. The FMDV 'look-alike' diagnostic assay panel contains five PCR and twelve reverse transcriptase PCR (RT-PCR) signatures for a total of seventeen simultaneous PCR amplifications for seven diseases plus incorporating four internal assay controls. It was developed and optimized to amplify both DNA and RNA viruses simultaneously in a single tube and employs Luminex{trademark} liquid array technology. Assay development including selection of appropriate controls, a comparison of signature performance in single and multiplex testing against target nucleic acids, as well of limits of detection for each of the individual signatures is presented. While this assay is a prototype and by no means a comprehensive test for FMDV 'look-alike' viruses, an assay of this type is envisioned to have benefit to a laboratory network in routine surveillance and possibly for post-outbreak proof of freedom from foot-and-mouth disease.

  6. Foot & Mouth Disease & Ulcerative/Vesicular Rule-outs: Challenges Encountered in Recent Outbreaks

    SciTech Connect (OSTI)

    Hullinger, P

    2008-01-28

    Foot and mouth disease (FMD) is a highly infectious and contagious viral disease affecting bovidae (cattle, zebus, domestic buffaloes, yaks), sheep, goats, swine, all wild ruminants and suidae. Camelidae (camels, dromedaries, llamas, vicunas) have low susceptibility. Foot and mouth disease is caused by a RNS virus of the family Picornaviridae, genus Aphthovirus. There are seven immunologically distinct serotypes: A, O, C, SAT1, SAT2, SAT3, Asia 1. Foot and mouth disease causes significant economic loss both to countries who manage it as an endemic disease (with or without vaccination), as well as those FMD free countries which may become infected. The mortality rate is low in adult animals, but often higher in young due to myocarditis. Foot and mouth disease is endemic in parts of Asia, Africa, the Middle East and South America (sporadic outbreaks in free areas). The Office of International Epizootics (OIE), also referred to the World Organization for Animal Health maintains an official list of free countries and zones.1 The OIE Terrestrial Code (Chapter 2.2.10) provides detailed information on the categories of freedom that can be allocated to a country as well as guidelines for the surveillance for foot and mouth disease (Appendix 3.8.7). In short, countries may be completely free of FMD, free with vaccination or infected with foot and mouth disease virus (FMDV). Source of FMDV include incubating and clinically affected animals with virus present in breath, saliva, faeces, urine, milk and semen. In experimental settings virus has been detected in milk several days before the onset of clinical signs2. Additional sources of virus are meat and by-products in which pH has remained above 6.0 as well as persistently infected carrier animals. Carrier animals may include cattle and water buffalo; convalescent animals and exposed vaccinates (virus persists in the oropharynx for up to 30 months in cattle or longer in buffalo, 9 months in sheep). Pigs do not become carriers. It has been shown that the African Cape buffalo are the major maintenance host of SAT serotypes. FMDV transmission can occur by either direct or indirect contact. Indirect transmission can occur via contaminated animate vectors (humans, etc.), inanimate vectors (vehicles, implements) or airborne transmission. Indirect disease transmission via animate or inanimate vectors can play a major role in disease transmission. Good biosecurity can significantly reduce this type of transmission. Airborne transmission is often debated and is known to be serotype and species specific as well as require specific environmental conditions to occur. Airborne transmission is favored in temperate zones and has been postulated to occur over distances of up to 60 km overland and 300 km by sea. Foot and mouth disease virus is an unenveloped virus which is preserved by refrigeration and freezing and progressively inactivated by temperatures above 50 C. FMDV is highly sensitive to pH change and is inactivated by pH < 6.0 or > 9.0. There are many disinfectants which are effective against FMDV including sodium hydroxide (2%), sodium carbonate (4%), and citric acid (0.2%). FMDV is resistant to iodophores, quaternary ammonium compounds, hypochlorite and phenol, especially in the presence of organic matter. The virus can survive in lymph nodes and bone marrow at neutral pH, but is destroyed in muscle when is pH < 6.0 i.e. after rigor mortis. FMDV can persist in contaminated feed/commodities and the environment for over to 1 month, depending on the temperature and pH conditions. The incubation period for FMD is 2-14 days. Animals transition through latent (infected but not infectious), subclinically infected (infectious but lacking clinical signs) clinically infected and recovered disease states. In cattle clinical signs include pyrexia, reluctance to eat, bruxism, drooling, lameness, treading or stamping of the feet and decreased milk production. Most clinical signs are related to the development and subsequent rupturing of vesicles at the coronary band and in the oral cavity. V

  7. HOW TO CLEAR YOUR BROWSER'S CACHE & COOKIES ON...INTERNET EXPLORER Once your browser is open on a non-FSU page (i.e. Google.com), SELECT the gear at the top right

    E-Print Network [OSTI]

    on a non-FSU page (i.e. Google.com), SELECT the gear at the top right to open the `Tools' menu Then SELECT browser is open on a non-FSU page (i.e. Google.com), SELECT the gear at the top right to open the `Tools

  8. Fuel economy testing of six 40-foot transit buses. Final report Aug 82-Mar 83

    SciTech Connect (OSTI)

    Francis, G.A.; Nelson, S.R.

    1983-03-01

    The importance of life-cycle cost analyses in transit bus procurement is recognized by the industry and has been a Congressional requirement for grantees. This report documents a program of fuel economy testing of six standard 40-foot buses. The main purpose of this series of tests is to assist transit authorities and bus suppliers by providing accurate comparable fuel consumption data on transit buses produced by different manufacturers. Six buses were selected by the manufacturers and supplied for testing by six transit properties directly from revenue service. This report makes the data available to the industry for discretionary use in estimating life-cycle costs. A list of bus manufacturers and the supplying transit system is provided.

  9. Gulf and Caribbean Research Vol 23, 37-48, 2011 Manuscript received, December 7, 2010; accepted, January 13, 2011 TRADE-OFFS BETWEEN GEAR SELECTIVITY AND LOGISTICS

    E-Print Network [OSTI]

    , January 13, 2011 37 TRADE-OFFS BETWEEN GEAR SELECTIVITY AND LOGISTICS WHEN SAMPLING NEKTON FROM SHALLOW logistical issues and the catch composition, density, and size structure of nekton samples collected measures of density and species composi- tion are also logistically the most difficult to operate (e

  10. Higher velocity, high-foot implosions on the National Ignition Facility laser

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Callahan, D. A.; Hurricane, O. A.; Hinkel, D. E.; Döppner, T.; Ma, T.; Park, H. -S.; Barrios Garcia, M. A.; Berzak Hopkins, L. F.; Casey, D. T.; Cerjan, C. J.; et al

    2015-05-15

    By increasing the velocity in “high foot” implosions [Dittrich et al., Phys. Rev. Lett. 112, 055002 (2014); Park et al., Phys. Rev. Lett. 112, 055001 (2014); Hurricane et al., Nature 506, 343 (2014); Hurricane et al., Phys. Plasmas 21, 056314 (2014)] on the National Ignition Facility laser, we have nearly doubled the neutron yield and the hotspot pressure as compared to the implosions reported upon last year. The implosion velocity has been increased using a combination of the laser (higher power and energy), the hohlraum (depleted uranium wall material with higher opacity and lower specific heat than gold hohlraums), andmore »the capsule (thinner capsules with less mass). We find that the neutron yield from these experiments scales systematically with a velocity-like parameter of the square root of the laser energy divided by the ablator mass. By connecting this parameter with the inferred implosion velocity (v), we find that for shots with primary yield >1e15 neutrons, the total yield ~ v???. This increase is considerably faster than the expected dependence for implosions without alpha heating ( ~v???) and is additional evidence that these experiments have significant alpha heating.« less

  11. Higher velocity, high-foot implosions on the National Ignition Facility laser

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Callahan, D. A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)] (ORCID:0000000315498916); Hurricane, O. A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Hinkel, D. E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Döppner, T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Ma, T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Park, H. -S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Barrios Garcia, M. A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Berzak Hopkins, L. F. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)] (ORCID:0000000291875667); Casey, D. T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Cerjan, C. J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)] (ORCID:0000000251686845); Dewald, E. L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Dittrich, T. R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Edwards, M. J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Haan, S. W. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)] (ORCID:0000000184045131); Hamza, A. V. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kline, J. L. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Knauer, J. P. [Univ. of Rochester, NY (United States); Kritcher, A. L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Landen, O. L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); LePape, S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); MacPhee, A. G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)] (ORCID:0000000341604479); Milovich, J. L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Nikroo, A. [General Atomics, San Diego, CA (United States)] (ORCID:0000000288550378); Pak, A. E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Patel, P. K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Rygg, J. R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Ralph, J. E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Salmonson, J. D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Spears, B. K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Springer, P. T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Tommasini, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Benedetti, L. R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Bionta, R. M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Bond, E. J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Bradley, D. K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Caggiano, J. A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Field, J. E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Fittinghoff, D. N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Frenje, J. [MIT (Massachusetts Inst. of Technology), Cambridge, MA (United States)] (ORCID:0000000168460378); Gatu Johnson, M. [MIT (Massachusetts Inst. of Technology), Cambridge, MA (United States); Grim, G. P. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Hatarik, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Merrill, F. E. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Nagel, S. R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)] (ORCID:0000000277686819); Izumi, N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Khan, S. F. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-05-01

    By increasing the velocity in “high foot” implosions [Dittrich et al., Phys. Rev. Lett. 112, 055002 (2014); Park et al., Phys. Rev. Lett. 112, 055001 (2014); Hurricane et al., Nature 506, 343 (2014); Hurricane et al., Phys. Plasmas 21, 056314 (2014)] on the National Ignition Facility laser, we have nearly doubled the neutron yield and the hotspot pressure as compared to the implosions reported upon last year. The implosion velocity has been increased using a combination of the laser (higher power and energy), the hohlraum (depleted uranium wall material with higher opacity and lower specific heat than gold hohlraums), and the capsule (thinner capsules with less mass). We find that the neutron yield from these experiments scales systematically with a velocity-like parameter of the square root of the laser energy divided by the ablator mass. By connecting this parameter with the inferred implosion velocity (v), we find that for shots with primary yield >1e15 neutrons, the total yield ~ v???. This increase is considerably faster than the expected dependence for implosions without alpha heating ( ~v???) and is additional evidence that these experiments have significant alpha heating.

  12. Modeling Estimated Personnel Needs for a Potential Foot and Mouth Disease Outbreak

    SciTech Connect (OSTI)

    Simmons, K; Hullinger, P

    2008-01-29

    Foot and Mouth disease (FMD) is a highly infectious and contagious viral disease affecting cloven-hoofed livestock that was last detected in the United States (US) in 1929. The prevalence of FMD in other countries, as well as the current potential for this virus to be used as a form of agroterrorism, has made preparations for a potential FMD outbreak a national priority. To assist in the evaluation of national preparedness, all 50 states were surveyed via e-mail, telephone and web search to obtain emergency response plans for FMD or for foreign animal diseases in general. Information from 33 states was obtained and analyzed for estimates of personnel resources needed to respond to an outbreak. These estimates were consolidated and enhanced to create a tool that could be used by individual states to better understand the personnel that would be needed to complete various tasks over time during an outbreak response. The estimates were then coupled, post-processing, to the output from FMD outbreaks simulated in California using the Multiscale Epidemiological/Economic Simulation and Analysis (MESA) model at Lawrence Livermore National Laboratory to estimate the personnel resource demands, by task, over the course of an outbreak response.

  13. Simulation and analysis of the plutonium shipping container subject to 30-foot drops

    SciTech Connect (OSTI)

    Gong, C.; Gupta, N.K.; Gromada, R.J.

    1995-12-31

    The shipping container 5320 is a shipping package for radioactive materials. In order to maintain the component in this packaging within the sub-critical state when subjected to any kind of Hypothetical Accident conditions (HAC), this Type B packaging is designed with various impact limiters. The present study is to examine the energy absorbing capacity of the impact limiter design of this container subjected to a 30-foot drop onto a flat unyielding horizontal surface in each of the three critical dropping orientations. This paper presents the results of a three dimensional nonlinear dynamic impact analysis. This analysis shows the deformed configuration of the container caused by the impact and also determines the effects of different stress wave paths in three distinct drops on the stress states in the critical component. The solution to the problem was obtained using the ABAQUS (explicit) finite element computer code. The nonlinearity of this analysis involves large structural deformation, elasto-plastic materials with strain hardening as well as multiple contact interfaces. Three drop orientations were studied, namely, top down impact, bottom down impact and side impact. Results will be compared against actual drop test data.

  14. Evaluation of Multiplexed Foot-and-Mouth Disease Nonstructural Protein Antibody Assay Against Standardized Bovine Serum Panel

    SciTech Connect (OSTI)

    Perkins, J; Parida, S; Clavijo, A

    2007-05-14

    Liquid array technology has previously been used to show proof-of-principle of a multiplexed non structural protein serological assay to differentiate foot-and-mouth infected and vaccinated animals. The current multiplexed assay consists of synthetically produced peptide signatures 3A, 3B and 3D and recombinant protein signature 3ABC in combination with four controls. To determine diagnostic specificity of each signature in the multiplex, the assay was evaluated against a naive population (n = 104) and a vaccinated population (n = 94). Subsequently, the multiplexed assay was assessed using a panel of bovine sera generated by the World Reference Laboratory for foot-and-mouth disease in Pirbright, UK. This sera panel has been used to assess the performance of other singleplex ELISA-based non-structural protein antibody assays. The 3ABC signature in the multiplexed assay showed comparative performance to a commercially available non-structural protein 3ABC ELISA (Cedi test{reg_sign}) and additional information pertaining to the relative diagnostic sensitivity of each signature in the multiplex is acquired in one experiment. The encouraging results of the evaluation of the multiplexed assay against a panel of diagnostically relevant samples promotes further assay development and optimization to generate an assay for routine use in foot-and-mouth disease surveillance.

  15. The potential role of wildlife in the spread and control of foot and mouth disease in an extensive livestock management system 

    E-Print Network [OSTI]

    Highfield, Linda

    2009-05-15

    Foot and mouth disease (FMD) is a highly contagious viral infection that affects all Artiodactyls (cloven-hoofed) species. The United States has been free of FMD since 1929, and the entire population of cloven-hoofed species ...

  16. Work with Biological Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Work with Biological Materials Print Planning A complete Experiment Safety Sheet (ESS) is required before work can be done at the ALS. This ESS is either a part of the proposal...

  17. Construction work process management 

    E-Print Network [OSTI]

    Soares, Jorge Barbosa

    1994-01-01

    for organizationand project-level work processes. Data to support the analysis were collected through a mailed questionnaire sent to construction executives and managers who were asked to provide information on organizational and project work processes, respectively....

  18. Team work: Construction

    E-Print Network [OSTI]

    Berdichevsky, Victor

    teamwork outside the classroom as well. Construction Management at Wayne StateTeam work: Construction Management The Division of Engineering Technology! Your coursework is just the beginning. Construction management students work

  19. Administering Work Force Discipline

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-05-14

    The order provides requirements and responsibilities for administering work force discipline and corrective actions. Supersedes DOE O 3750.1.

  20. Appointment Future work

    E-Print Network [OSTI]

    Phillips, David

    1/17 Appointment scheduling Example: a glaucoma clinic Future work Appointment scheduling #12;2/17 Appointment scheduling Example: a glaucoma clinic Future work Have you heard this one? So: a glaucoma clinic Future work Have you heard this one? So a mathematician walks into a room full

  1. Methodological Research Future Work

    E-Print Network [OSTI]

    Wolfe, Patrick J.

    Outline Background Methodological Research Results Future Work New Dataset 1878 PCA for 1000 rmfs Background Methodological Research Results Future Work New Dataset 1878 PCA for 1000 rmfs Background Quasar Analysis Future Work Doubly-intractable Distribution Other Calibration Uncertainty New Dataset

  2. Influence of steel type on the propensity for tribochemical wear in boundary lubrication with a wind turbine gear oil

    SciTech Connect (OSTI)

    Evans, Ryan D.; Doll, Gary L.; Hager, C H; Howe, Jane Y

    2010-01-01

    Tribochemical wear may occur at the interface between a surface and a lubricant as a result of chemical and mechanical interactions in a tribological contact. Understanding the onset of tribochemical wear damage on component surfaces requires the use of high resolution techniques such as transmission electron microscopy (TEM). In this study, two steel types, case carburized AISI 3310 and through-hardened AISI 52100, were wear tested using a ball-on-disk rolling/sliding contact tribometer in fully formulated commercial wind turbine gearbox oil under boundary lubrication conditions with 10% slip. With the exception of steel type, all other test conditions were held constant. Conventional tribofilm analysis in the wear tracks was performed using X-ray photoelectron spectroscopy, and no significant composition differences were detected in the tribofilms for the different steel disk types. However, TEM analysis revealed significant tribochemical wear differences between the two steel types at multiple length scales, from the near-surface material microstructure (depth < 500 nm) to the tribofilm nanostructure. Nanometer-scale interfacial cracking and surface particle detachment was observed for the AISI 52100 case, whereas the tribofilm/substrate interface was abrupt and undamaged for the AISI 3310 case. Differences in tribofilm structure, including the location and orientation of MoS{sub 2} single sheet inclusions, were observed as a function of steel type as well. It is suggested that the tribochemical wear modes observed in these experiments may be origins of macroscopic surface-initiated damage such as micropitting in bearings and gears.

  3. INL @ work: Archaeologist

    ScienceCinema (OSTI)

    Lowrey, Dino

    2013-05-28

    INL @ work features jobs performed at the lab. For more information about INL careers, visit http://www.facebook.com/idahonationallaboratory.

  4. Work Area Policy

    E-Print Network [OSTI]

    2005-04-19

    POLICY X.X.X. Volume V, Information Technology. Chapter 6, Acceptable Safety Work Locations. Issuing Office: Department of Mathematics. Responsible ...

  5. Work with Biological Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking WithTelecentricNCubictheThepresented in the7 Table7WorkWork withWork

  6. WORKPLACE GUIDES GLOBAL WORKING

    E-Print Network [OSTI]

    Roelleke, Thomas

    of Stonewall good practice publications ­ profiles some of the employers paving the way for gay staff to work do arise. This guide provides clear, practical tips on how gay employees can access internationalWORKPLACE GUIDES GLOBAL WORKING Supporting lesbian, gay and bisexual staff on overseas assignments

  7. Work Authorization System

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2005-04-21

    To establish a work authorization and control process for work performed by designated site and facility management contractors, and other contractors as determined by the procurement executive, consistent with the budget execution and program evaluation requirements of the Department of Energy's (DOE's) Planning, Programming, Budgeting, and Evaluation process. Cancels DOE O 412.1.

  8. Work Authorization System

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2005-04-21

    To establish a work authorization and control process for work performed by designated site and facility management contractors, and other contractors as determined by the procurement executive, consistent with the budget execution and program evaluation requirements of the Department of Energy's Planning, Programming, Budgeting, and Evaluation process. Admin Chg 1, dated 5-21-2014, cancels DOE O 412.1A.

  9. Mathematical Future work

    E-Print Network [OSTI]

    Phillips, David

    1/15 Mathematical modeling Example: Glaucoma clinic Future work Scheduling and resource planning;2/15 Mathematical modeling Example: Glaucoma clinic Future work So a mathematician walks into a room full of healthcare providers... · Mathematical modeling · A model for the glaucoma clinic · Future possibilities #12

  10. Work Authorization System

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-04-20

    It establishes a work authorization and control process for work performed by designated management and operating (M&O), management and integrating (M&I), environmental restoration management contracts (ERMC) and other contracts determined by the Procurement Executive (hereafter referred to as M&O contractors). Cancels DOE O 5700.7C. Canceled by DOE O 412.1A.

  11. Scalable Work Stealing

    SciTech Connect (OSTI)

    Dinan, James S.; Larkins, D. B.; Sadayappan, Ponnuswamy; Krishnamoorthy, Sriram; Nieplocha, Jaroslaw

    2009-11-14

    Irregular and dynamic parallel applications pose significant challenges to achieving scalable performance on large-scale multicore clusters. These applications often require ongoing, dynamic load balancing in order to maintain efficiency. While effective at small scale, centralized load balancing schemes quickly become a bottleneck on large-scale clusters. Work stealing is a popular approach to distributed dynamic load balancing; however its performance on large-scale clusters is not well understood. Prior work on work stealing has largely focused on shared memory machines. In this work we investigate the design and scalability of work stealing on modern distributed memory systems. We demonstrate high efficiency and low overhead when scaling to 8,192 processors for three benchmark codes: a producer-consumer benchmark, the unbalanced tree search benchmark, and a multiresolution analysis kernel.

  12. Work with Biological Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking WithTelecentricNCubictheThepresented in the7 Table7WorkWork with

  13. Work with Biological Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking WithTelecentricNCubictheThepresented in the7 Table7WorkWork

  14. Putting Science to Work

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    that 'bright kid' whose advice I have always sought and mostly followed." Putting Science to Work SafeTy remINDer Filigenzi, Gergel on the Job for TTED T wo new ORNL staff...

  15. How Fusion Energy Works

    Broader source: Energy.gov [DOE]

    Fusion energy is the energy source of the sun and all of the stars. As part of How Energy Works, we'll cover everything from fuel sources to plasma physics and beyond.

  16. Clean Energy Works

    Broader source: Energy.gov [DOE]

    Through Clean Energy Works, homeowners can finance up to $30,000 at a fixed interest rate for home energy efficiency retrofits for a variety of measures. Customers have varying lender and loan op...

  17. Fermilab: Science at Work

    ScienceCinema (OSTI)

    Brendan Casey; Herman White; Craig Hogan; Denton Morris; Mary Convery; Bonnie Fleming; Deborah Harris; Dave Schmitz; Brenna Flaugher; Aron Soha

    2013-02-14

    Six days. Three frontiers. One amazing lab. From 2010 to 2012, a film crew followed a group of scientists at the Department of Energy's Fermilab and filmed them at work and at home. This 40-minute documentary shows the diversity of the people, research and work at Fermilab. Viewers catch a true behind-the-scenes look of the United States' premier particle physics laboratory while scientists explain why their research is important to them and the world.

  18. Fermilab: Science at Work

    SciTech Connect (OSTI)

    Brendan Casey; Herman White; Craig Hogan; Denton Morris; Mary Convery; Bonnie Fleming; Deborah Harris; Dave Schmitz; Brenna Flaugher; Aron Soha

    2013-02-01

    Six days. Three frontiers. One amazing lab. From 2010 to 2012, a film crew followed a group of scientists at the Department of Energy's Fermilab and filmed them at work and at home. This 40-minute documentary shows the diversity of the people, research and work at Fermilab. Viewers catch a true behind-the-scenes look of the United States' premier particle physics laboratory while scientists explain why their research is important to them and the world.

  19. A Measurement of the holographic minimum observable beam branching ratio in the Fermilab 15-foot bubble chamber

    SciTech Connect (OSTI)

    Aderholz, M.; Aggarwal, M.M.; Akbari, H.; Allport, P.P.; Badyal, S.K.; Ballagh, H.C.; Barth, M.; Baton, J.P.; Bingham, H.H.; Bjelkhagen, H.; Brucker, E.B.; Burnstein,; Campbell, J.R.; Cence, R.J.; Chatterjee, T.K.; Clayton, E.F.; Corrigan, G.; Coutures, C.; DeProspo, D.; Devanand,; De Wolf, E.A.; /UC, Berkeley /Birmingham U. /Brussels U.,

    1997-01-01

    Holography has been used successfully in combination with conventional optics for the first time in a large cryogenic bubble chamber, the 15-Foot Bubble Chamber at Fermilab, during a physics run. The innovative system combined the reference beam with the object beam, illuminating a conical volume of {approx} 1.4 m{sup 3}. Bubble tracks from neutrino interactions with a width of {approx} 120 {micro}m have been recorded with good contrast. The ratio of intensities of the object light to the reference light striking the film is called the Beam Branching Ratio. We obtained in our experiment an exceedingly small minimum-observable ratio of (0.54 {+-} 0.21) x 10{sup -7}. The technology has the potential for a wide range of applications.

  20. Work breakdown structure guide

    SciTech Connect (OSTI)

    Not Available

    1987-02-06

    Utilization of the work breakdown structure (WBS) technique is an effective aid in managing Department of Energy (DOE) programs and projects. The technique provides a framework for project management by focusing on the products that are being developed or constructed to solve technical problems. It assists both DOE and contractors in fulfilling their management responsibilities. This document provides guidance for use of the WBS technique for product oriented work identification and definition. It is one in a series of policy and guidance documents supporting DOE's project manaagement system.

  1. Work/Life Balance

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfateSciTechtail.Theory ofDidDevelopmentatabout Who Works for NIF & PS? TheWindows,Work

  2. Work plan (Nov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking WithTelecentricNCubictheThepresented in the7 Table7Work

  3. Working Group Reports

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking WithTelecentricNCubictheThepresented in1: Model or Working Group

  4. Working With Berkeley Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking WithTelecentricNCubictheThepresented in1: Model or Working

  5. Work Force Discipline

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1983-03-23

    The order provides guidance and procedures and states responsibilities for maintaining work force discipline in DOE. Chg 1, dated 3-11-85; Chg 2, dated 1-6-86; Chg 3, dated 3-21-89; Chg 4, dated 8-2-90; Chg 5, dated 3-9-92; Chg 6, dated 8-21-92, cancels Chg 5.

  6. TEAM PROJECT: WORKING PROTOTYPE

    E-Print Network [OSTI]

    .) Value: the report is worth 10% of the Team Project grade. #12;Next steps: You will evaluateTEAM PROJECT: WORKING PROTOTYPE Due: Week of April 5-8 at time to be scheduled with GTA Format that will be polished into the final project for which you will create a final report and give a final presentation

  7. WORKING PAPER Resource Economics

    E-Print Network [OSTI]

    WORKING PAPER 2008-07 REPA Resource Economics & Policy Analysis Research Group Department of Economics University of Victoria Forest-mill integration: a transaction costs perspective Kurt Niquidet, Moeltne, and Johnson) 2003-06 ­ Climate Change and Forest Ecosystem Sinks: Economic Analysis (van Kooten

  8. Civil Works Environmental Desk

    E-Print Network [OSTI]

    US Army Corps of Engineers

    Civil Works Environmental Desk Reference Prepared by the Institute for Water Resources U.S. Army to address economic, social, institutional, and environmental needs in water resources planning and policy for conducting economic, social, environmental, and institutional analyses. These methods were essential

  9. Optimizing a Ratchet Gear

    E-Print Network [OSTI]

    I. M. Sokolov

    2002-07-29

    The energetic efficiencies of rocked ratchets reported in the literature typically lie in the sub-percent range. We discuss the problem of optimization of the energetic efficiency of a ratchet, and show that considerably higher efficiencies can be achieved; however this assumes a fine-tuning of the parameters of the system. The domain of parameters corresponding to high efficiencies is typically narrow.

  10. ImageGear

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverse (JournalvivoHighHusseinSOLICWfATION/MODIFICATlON OFMA!n!NEZ9,036,866 Site Map

  11. Making energy mortgages work

    SciTech Connect (OSTI)

    Luboff, J.A.

    1995-05-01

    At a time when many energy efficiency projects face an uncertain future, home energy ratings and energy mortgages are receiving more attention than ever. Will enthusiasm in the industry and new programs from conventional lenders and the federal government finally open up the market? This article describes the energy morgage marketplace, how energy mortages work, and what the future holds. Topics include the following: Who`s who and what`s what in the EM marketplace; initial Freddie Mac and Fannie Mae guidelines; past and present home energy rating system; how do you score a house; how an energy mortage works; energy improvement loans; sample rating certificate; fixing the system; Colorado`s conventional market approach; US DOE`s pilot group; energy mortages set to take off.

  12. Work with Biological Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservationBio-Inspired SolarAbout /Two0Photos andSeminarsDesign RenewableNational SecurityWork

  13. Winter 2014 Working Groups

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfateSciTechtail.Theory ofDidDevelopmentatabout Who Works for NIF & PS? TheWindows, Doors,

  14. Working With Us | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfateSciTechtail.Theory ofDidDevelopmentatabout Who Works for NIF & PS?

  15. ORISE: Working with ORISE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfateSciTechtail.Theory ofDid you notHeatMaRIEdioxideUser WorkEPVisiting Us If you are visiting theOak

  16. Service and Repair Work

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfateSciTechtail.Theory ofDidDevelopment Top Scientific Impact SinceService and Repair Work

  17. TRU TeamWorks

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking With LivermoreSustainableDEPARTMENT OFEnergy- EnergyTri-State, 2004 By

  18. TRU TeamWorks

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking With LivermoreSustainableDEPARTMENT OFEnergy- EnergyTri-State, 2004

  19. TRU TeamWorks

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking With LivermoreSustainableDEPARTMENT OFEnergy- EnergyTri-State, 20041,

  20. TRU TeamWorks

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking With LivermoreSustainableDEPARTMENT OFEnergy- EnergyTri-State, 20041,3

  1. TRU TeamWorks

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking With LivermoreSustainableDEPARTMENT OFEnergy- EnergyTri-State,

  2. TRU TeamWorks

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking With LivermoreSustainableDEPARTMENT OFEnergy- EnergyTri-State,2 WIPP

  3. TRU TeamWorks

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking With LivermoreSustainableDEPARTMENT OFEnergy- EnergyTri-State,2 WIPP9,

  4. Work Force Restructuring Activities

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyThe U.S.Lacledeutilities.EnergyKirstin AlberiComputerMathewsWeiWork Force

  5. TeamWorks.cdr

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking With U.S. Coal StocksSuppliersmillion core hours toJune 2013September

  6. How It Works

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation CurrentHenry Bellamy, Ph.D.Food Drive HolidayHours UsedFire 1GetHowHow It Works

  7. Coping with Hot Work Environments 

    E-Print Network [OSTI]

    Smith, David

    2005-04-28

    Many people work under hot, humid conditions. Summer heat is a particular hazard to agricultural producers who work long hours under the sun. However, other people working in hot yards, gardens, kitchens or industry jobs are also exposed...

  8. How NIF Works

    ScienceCinema (OSTI)

    None

    2010-09-01

    The National Ignition Facility, located at Lawrence Livermore National Laboratory, is the world's largest laser system... 192 huge laser beams in a massive building, all focused down at the last moment at a 2 millimeter ball containing frozen hydrogen gas. The goal is to achieve fusion... getting more energy out than was used to create it. It's never been done before under controlled conditions, just in nuclear weapons and in stars. We expect to do it within the next 2-3 years. The purpose is threefold: to create an almost limitless supply of safe, carbon-free, proliferation-free electricity; examine new regimes of astrophysics as well as basic science; and study the inner-workings of the U.S. stockpile of nuclear weapons to ensure they remain safe, secure and reliable without the need for underground testing. More information about NIF can be found at:

  9. Working Group Report: Sensors

    SciTech Connect (OSTI)

    Artuso, M.; et al.,

    2013-10-18

    Sensors play a key role in detecting both charged particles and photons for all three frontiers in Particle Physics. The signals from an individual sensor that can be used include ionization deposited, phonons created, or light emitted from excitations of the material. The individual sensors are then typically arrayed for detection of individual particles or groups of particles. Mounting of new, ever higher performance experiments, often depend on advances in sensors in a range of performance characteristics. These performance metrics can include position resolution for passing particles, time resolution on particles impacting the sensor, and overall rate capabilities. In addition the feasible detector area and cost frequently provides a limit to what can be built and therefore is often another area where improvements are important. Finally, radiation tolerance is becoming a requirement in a broad array of devices. We present a status report on a broad category of sensors, including challenges for the future and work in progress to solve those challenges.

  10. Video Shoot Scope of Work

    Broader source: Energy.gov [DOE]

    Video Shoot Scope of Work, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  11. High Temperature Membrane Working Group

    Broader source: Energy.gov [DOE]

    This presentation provides an overview of the High Temperature Membrane Working Group Meeting in May 2007.

  12. Clean Energy Works Oregon (CEWO)

    Broader source: Energy.gov [DOE]

    Presents Clean Energy Works Oregon's program background and the four easy steps to lender selection.

  13. Interview: LaborWorks@NeighborWorks Provides Vermont Contractors...

    Broader source: Energy.gov (indexed) [DOE]

    LaborWorks@NeighborWorks is a nonprofit temporary labor pool formed to assist professional contractors involved with the HEAT Squad during busy periods when they couldn't keep up...

  14. Water Resources Working Group Report

    E-Print Network [OSTI]

    Sheridan, Jennifer

    Water Resources Working Group Report This report provided content for the Wisconsin Initiative in February 2011. #12;Water Resources Working Group Wisconsin Initiative on Climate Change Impacts October 2010 #12;Water Resources Working Group Members ­ WICCI Tim Asplund (Co-Chair) - Wisconsin Department

  15. Development and Characterization of A Multiplexed RT-PCR Species Specific Assay for Bovine and one for Porcine Foot-and-Mouth Disease Virus Rule-Out

    SciTech Connect (OSTI)

    Smith, S M; Danganan, L; Tammero, L; Vitalis, B; Lenhoff, R; Naraghi-arani, P; Hindson, B

    2007-08-06

    Lawrence Livermore National Laboratory (LLNL), in collaboration with the Department of Homeland Security (DHS) and the United States Department of Agriculture (USDA), Animal and Plant Health Inspection Services (APHIS) has developed candidate multiplexed assays that may potentially be used within the National Animal Health Laboratory Network (NAHLN), the National Veterinary Services Laboratory (Ames, Iowa) and the Plum Island Animal Disease Center (PIADC). This effort has the ability to improve our nation's capability to discriminate between foreign animal diseases and those that are endemic using a single assay, thereby increasing our ability to protect food and agricultural resources with a diagnostic test which could enhance the nation's capabilities for early detection of a foreign animal disease. In FY2005 with funding from the DHS, LLNL developed the first version (Version 1.0) of a multiplexed (MUX) nucleic-acid-based RT-PCR assay that included signatures for foot-and-mouth disease virus (FMDV) detection with rule-out tests for two other foreign animal diseases (FADs) of swine, Vesicular Exanthema of Swine (VESV) and Swine Vesicular Disease Virus (SVDV), and four other domestic viral diseases Bovine Viral Diarrhea Virus (BVDV), Bovine Herpes Virus 1 (BHV-1), Bluetongue virus (BTV) and Parapox virus complex (which includes Bovine Papular Stomatitis Virus [BPSV], Orf of sheep, and Pseudocowpox). In FY06, LLNL has developed Bovine and Porcine species-specific panel which included existing signatures from Version 1.0 panel as well as new signatures. The MUX RT-PCR porcine assay for detection of FMDV includes the FADs, VESV and SVD in addition to vesicular stomatitis virus (VSV) and porcine reproductive and respiratory syndrome (PRRS). LLNL has also developed a MUX RT-PCR bovine assay for detection of FMDV with rule out tests for the two bovine FADs malignant catarrhal fever (MCF), rinderpest virus (RPV) and the domestic diseases vesicular stomatitis virus (VSV), bovine viral diarrhea virus (BVDV), infectious bovine rhinotracheitus virus (BHV-1), bluetongue virus (BTV), and the Parapox viruses (which are of two bovine types) bovine papular stomatitis virus (BPSV) and psuedocowpox (PCP). A timeline for this development is presented in Table 1. The development of the Version 1.0 panel for FMDV rule-out and the most current efforts aimed to designed species specific panels has spanned over 2 1/2 years with multiple collaborative partnerships. This document provides a summary of the development, testing and performance data at OIE Stage 1 Feasibility into Stage 2 Assay Development and Standardization1 (see Table 2), gathered as of June 30th, 2007 for the porcine and bovine MUX assay panels. We present an overview of the identification and selection of candidate genetic signatures, the assay development process, and preliminary performance data for each of the individual signatures as characterized in the multiplexed format for the porcine and bovine panels. The Stage 1 Feasibility data of the multiplexed panels is presented in this report also includes relevant data acquired from the Version 1.0 panel as supporting information where appropriate. In contrast to last years effort, the development of the bovine and porcine panels is pending additional work to complete analytical characterization of FMDV, VESV, SVD, RPV and MCF. The signature screening process and final panel composition impacts this effort. The unique challenge presented this year was having strict predecessor limitations in completing characterization, where efforts at LLNL must precede efforts at PIADC, such challenges were alleviated in the 2006 reporting by having characterization data from the interlaboratory comparison and at Plum Island under AgDDAP project. We will present an addendum at a later date with additional data on the characterization of the porcine and bovine multiplex assays when that data is available. As a summary report, this document does not provide the details of signature generation, evaluation, and testing, nor does it provide spec

  16. Foot axes and angles

    E-Print Network [OSTI]

    Gentili, A; Masih, S; Yao, L; Seeger, LL

    1996-01-01

    D and WAPNER, K L, Hallux valgus deform- ity: Preoperativenormal, HIA = 9°; (c) hallux valgus interphalangeus, HIA =2. TREPAL, M J, Hallux valgus and metatarsus adductus: The

  17. TITLE: The Influence of Carrier Bearing Tolerances on Planet Gear and Bearing Alignment under Side Load and Rotor Weight

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking With LivermoreSustainableDEPARTMENT OF ENERGYFAQS TITLETITLE XVIIst11

  18. Defining work from operational principles

    E-Print Network [OSTI]

    R. Gallego; J. Eisert; H. Wilming

    2015-04-20

    In recent years we have witnessed a concentrated effort to make sense of thermodynamics for small-scale systems. One of the main difficulties is that, at the nano-scale, thermal fluctuations of energy in general render it conceptually difficult to distinguish work from heat. Despite of several attempts to resolve this issue, many of which inspired by quantum information theory, there is still remarkable little consensus on it. In this work, we attempt to define work in a strictly operational way. In our resource-theoretic approach, agents wish to agree upon how much work needs to be invested to effect a transition from one state of an arbitrary quantum work-storage device to another. We introduce basic operational principles, and deduce from them a strict set of mathematical properties that any reasonable function quantifying such work has to fulfil. One of those generalises strong sub-additivity, a key property in quantum information theory, to the domain of thermodynamics. We show that one work quantifier fulfilling all the required properties is the difference of the non-equilibrium free energy of the initial and final state of the work-storage system. More generally, for any work quantifier fulfilling the stated properties, we can derive a quantitative second law in the sense of bounding the work that can be performed using some non-equilibrium resource by the work that is needed to create it. We furthermore discuss the role of path dependence for work quantifiers and the connection to the concept of probability-distributions of work. Our mathematical results can be formulated abstractly and carry over to other resource theories than quantum thermodynamics.

  19. Defining work from operational principles

    E-Print Network [OSTI]

    R. Gallego; J. Eisert; H. Wilming

    2015-09-25

    In recent years we have witnessed a concentrated effort to make sense of thermodynamics for small-scale systems. One of the main difficulties is that, at the nano-scale, thermal fluctuations of energy in general render it conceptually difficult to distinguish work from heat. Despite of several attempts to resolve this issue, many of which inspired by quantum information theory, there is still remarkable little consensus on it. In this work, we attempt to define work in a strictly operational way. In our resource-theoretic approach, agents wish to agree upon how much work needs to be invested to effect a transition from one state of an arbitrary quantum work-storage device to another. We introduce basic operational principles, and deduce from them a strict set of mathematical properties that any reasonable function quantifying such work has to fulfill. We show that one work quantifier satisfying all the required properties is the difference of the non-equilibrium free energy of the initial and final state of the work-storage system. More generally, for any work quantifier fulfilling the stated properties, we can derive a quantitative second law in the sense of bounding the work that can be performed using some non-equilibrium resource by the work that is needed to create it. The appropriate treatment of correlations turns out to be essential to obtain such second laws and we discuss their role in detail. We furthermore discuss the role of path dependence for work quantifiers and the connection to the concept of probability-distributions of work. Our mathematical results can be formulated abstractly and are general enough to carry over to other resource theories than quantum thermodynamics.

  20. Interagency Sustainability Working Group | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Sustainability Working Group Interagency Sustainability Working Group The Interagency Sustainability Working Group (ISWG) is the coordinating body for sustainable federal...

  1. Interagency Sustainability Working Group | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Program Areas Sustainable Buildings & Campuses Interagency Sustainability Working Group Interagency Sustainability Working Group The Interagency Sustainability Working Group...

  2. Work For Others (Non-Department of Energy Funded Work)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-09-28

    Work for Others (WFO) is the performance of work for non-Department of Energy (DOE) entities by DOE/National Nuclear Security Administration (NNSA) and/or their respective contractor personnel or the use of DOE/NNSA facilities that is not directly funded by DOE appropriations. Cancels DOE O 481.1A.

  3. Work For Others (Non-Department of Energy Funded Work)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-01-03

    Work for Others (WFO) is the performance of work for non-Department of Energy (DOE) entities by DOE/National Nuclear Security Administration (NNSA) and/or their respective contractor personnel or the use of DOE/NNSA facilities that is not directly funded by DOE appropriations. WFO has the following objectives. Cancels DOE O 481.1.

  4. Ad Hoc Curriculum Implementation Working Group Ad Hoc Working Group

    E-Print Network [OSTI]

    Brown, Sally

    Ad Hoc Curriculum Implementation Working Group MINUTES Ad Hoc Working Group 4 December 2002 Friedman on her visit next week. ONE CURRICULUM OR TWO? Information presented by Trudeau shows that PSE and other programs cannot be merged into a single curriculum. The Faculty Senate website states

  5. The cultural work of microwork

    E-Print Network [OSTI]

    Irani, L

    2015-01-01

    divisions of labor in high-technology work. Among computerservice, in historical high-technology discourses throughthe present moment of high-technology entrepreneurialism and

  6. Construction Work in Progress (Kansas)

    Broader source: Energy.gov [DOE]

    This Act allows nuclear power plants to qualify for recovery of Construction Work in Progress (CWIP) and other preconstruction expenditures in rates. Previously, nuclear power plants were excluded...

  7. INL @ work: Nuclear Reactor Operator

    ScienceCinema (OSTI)

    Russell, Patty

    2013-05-28

    INL @ work features jobs at the Idaho National Laboratory. Learn more about careers and energy research at INL's facebook site http://www.facebook.com/idahonationallaboratory

  8. Ajay K. Agrawal Work: Home

    E-Print Network [OSTI]

    Carver, Jeffrey C.

    · Lean premixed combustion of alternate fuels (synthetic gas, bio-fuels) · Low-emission combustion Worked with staff engineers to analyze fuel composition effects on lean premixed combustion

  9. Attachment 1 - Performance Work Statement

    National Nuclear Security Administration (NNSA)

    federal and state laws and regulations; DOE orders, standards, and recommendations; and industry standards and best practices are incorporated into the work scope. 3.2.5.4...

  10. Recovery Act Weekly Video: 200 Area Asbestos Removal, U-Ancillary Demolition, 200 West Transfer Building Footings

    ScienceCinema (OSTI)

    None

    2012-06-14

    A weekly update of the Recovery Act at work. Demolition of U-Ancillary that was contaminated with uranium and asbestos as well as removing asbestos from the Steam Generation Plant in the 200 East Area.

  11. Recovery Act Weekly Video: 200 Area Asbestos Removal, U-Ancillary Demolition, 200 West Transfer Building Footings

    SciTech Connect (OSTI)

    None

    2010-01-01

    A weekly update of the Recovery Act at work. Demolition of U-Ancillary that was contaminated with uranium and asbestos as well as removing asbestos from the Steam Generation Plant in the 200 East Area.

  12. Hazardous Working Policy November 2012

    E-Print Network [OSTI]

    Doran, Simon J.

    for: The management of University workers performing hazardous tasks or working in hazardous areas;2 Hazardous Areas: are areas where a University worker may be exposed to risks that are considered greater1 Hazardous Working Policy November 2012 Introduction The University of Surrey acknowledges

  13. The work value of information

    E-Print Network [OSTI]

    Oscar C. O. Dahlsten; Renato Renner; Elisabeth Rieper; Vlatko Vedral

    2009-08-04

    We present quantitative relations between work and information that are valid both for finite sized and internally correlated systems as well in the thermodynamical limit. We suggest work extraction should be viewed as a game where the amount of work an agent can extract depends on how well it can guess the micro-state of the system. In general it depends both on the agent's knowledge and risk-tolerance, because the agent can bet on facts that are not certain and thereby risk failure of the work extraction. We derive strikingly simple expressions for the extractable work in the extreme cases of effectively zero- and arbitrary risk tolerance respectively, thereby enveloping all cases. Our derivation makes a connection between heat engines and the smooth entropy approach. The latter has recently extended Shannon theory to encompass finite sized and internally correlated bit strings, and our analysis points the way to an analogous extension of statistical mechanics.

  14. Work for Others (Non-Department of Energy Funded Work)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2005-01-24

    Work for Others is the performance of work for non-Department of Energy (DOE) entities by DOE/National Nuclear Security Administration (NNSA) and/or their respective contractor personnel or the use of DOE/NNSA facilities that is not directly funded by DOE appropriations. Cancels DOE O 481.1B. Certified 1-13-11. Admin Chg 1, dated 3-14-11.

  15. Radioactive Contamination Control Work Practices

    SciTech Connect (OSTI)

    WAGGONER, L.O.

    2002-10-01

    At Hanford, loose radioactive material can be found in plant systems, rooms, ventilation ducts, fuel pools, and outside radiological work facilities. Work practices used to accomplish radiological work in nuclear facilities often concern keeping radioactive contamination from spreading. This is not an easy task as the contamination activity levels can be very high and the material can be very unstable. Most of the time, the contamination is not visible, so we have to rely on surveys taken by Radiological Controls personnel to tell workers where the contamination is located and the activity levels present. The work practices used by workers are critical in controlling contamination spread, but it is impossible to document all of the work practices a worker should use. Many times, something will happen during the job that could result in a contamination spread. We rely on the workers knowledge and experience to realize when a potential spread of contamination is occurring, and take the actions necessary to prevent it from happening. It is important that a worker understand the concepts of contamination control in order to make the right decisions when work is accomplished. In facilities that work with ''fissile'' materials there is increased concern that nothing be done that increases the chance that a ''criticality accident'' might occur during work. Criticality safety personnel need to be consulted and approve contamination control practices that could increase the potential for a criticality accident. This Workshop includes a discussion of fundamental contamination control practices and new techniques used for radiological work. This is intended to be very informative and include hands-on exercises to provide the attendees with an appreciation of the methods being used to confine contamination spread.

  16. RCRA corrective action: Work plans

    SciTech Connect (OSTI)

    Not Available

    1995-02-01

    This Information Brief describes the work plans that owners/operators may have to prepare in conjunction with the performance of corrective action for compliance with RCRA guidelines. In general, the more complicated the performance of corrective action appears from the remedial investigation and other analyses, the more likely it is that the regulator will impose work plan requirements. In any case, most owner/operators will prepare work plans in conjunction with the performance of corrective action processes as a matter of best engineering management practices.

  17. FY 1994 Annual Work Plan

    SciTech Connect (OSTI)

    Not Available

    1993-09-30

    In accordance with the Inspector General`s Strategic Planning Policy directive, the Office of Inspector General (OIG) annually updates its Strategic Plan with budgetary and program guidance for the next fiscal year. The program guidance identifies and establishes priorities for OIG coverage of important DOE issues and operations, provides the basis for assigning OIG resources, and is the source for issues covered in Assistant Inspectors General annual work plans. The Office of the Assistant Inspector General for Audits (AIGA) publishes an Annual Work Plan in September of each year. The plan includes the OIG program guidance and shows the commitment of resources necessary to accomplish the assigned work and meet our goals. The program guidance provides the framework within which the AIGA work will be planned and accomplished. Audits included in this plan are designed to help insure that the requirements of our stakeholders have been considered and blended into a well balanced audit program.

  18. Attachment 1 - Performance Work Statement

    National Nuclear Security Administration (NNSA)

    including TTR. Waste acceptance services will be performed at the NNSS and at waste generator sites. DE-SOL-0005982 Attachment 1 Page 1 2. Scope of Work 2.1 Requirement: The EPS...

  19. Task Conceptions and Work Arrangements 

    E-Print Network [OSTI]

    Scott, W Richard; Dornbusch, Sanford M; Evashwick, Connie J; Magnani, Leonard; Sagatun, Inger

    2015-08-12

    , University of Bergen, Norway. TECHNICAL REPORT #47 TASK CONCEPTION'S AND WORK ARRANGEMENTS For well over half a century sociologists have been engaged in the study of organizations. But until the last few years, there has been relatively little systematic...

  20. Principle of Minimal Work Fluctuations

    E-Print Network [OSTI]

    Gaoyang Xiao; Jiangbin Gong

    2015-06-03

    Understanding and manipulating work fluctuations in microscale and nanoscale systems are of both fundamental and practical interest. For example, in considering the Jarzynski equality $\\langle e^{-\\beta W} \\rangle=e^{-\\beta \\Delta F}$, a change in the fluctuations of $e^{-\\beta W}$ may impact on how fast the statistical average of $e^{-\\beta W}$ converges towards the theoretical value $e^{-\\beta \\Delta F}$, where $W$ is the work, $\\beta$ is the inverse temperature, and $\\Delta F$ is free energy difference between two equilibrium states. Motivated by our previous study aiming at the suppression of work fluctuations, here we obtain a principle of minimal work fluctuations. In brief, adiabatic processes as treated in quantum and classical adiabatic theorems yield the minimal fluctuations in $e^{-\\beta W}$. In the quantum domain, if a system initially prepared at thermal equilibrium is subject to a work protocol but isolated from a bath during the time evolution, then a quantum adiabatic process without energy level crossing (or an assisted adiabatic process reaching the same final states as in a conventional adiabatic process) yields the minimal fluctuations in $e^{-\\beta W}$, where $W$ is the quantum work defined by two energy measurements in the beginning and at the end of the process. In the classical domain where the classical work protocol is realizable by an adiabatic process, then the classical adiabatic process also yields the minimal fluctuations in $e^{-\\beta W}$. Numerical experiments based on a Landau-Zener process confirm our theory in the quantum domain, and our theory in the classical domain explains our previous numerical findings regarding the suppression of classical work fluctuations [G.~Y.~Xiao and J.~B.~Gong, Phys. Rev. E {\\bf 90}, 052132 (2014)].

  1. Development and Characterization of a Multiplexed RT-PCR Species Specific Assay for Bovine and one for Porcine Foot-and-Mouth Disease Virus Rule-Out Supplemental Materials

    SciTech Connect (OSTI)

    Smith, S; Danganan, L; Tammero, L; Lenhoff, R; Naraghi-arani, P; Hindson, B

    2007-08-06

    Lawrence Livermore National Laboratory (LLNL), in collaboration with the Department of Homeland Security (DHS) and the United States Department of Agriculture (USDA), Animal and Plant Health Inspection Services (APHIS) has developed advanced rapid diagnostics that may be used within the National Animal Health Laboratory Network (NAHLN), the National Veterinary Services Laboratory (Ames, Iowa) and the Plum Island Animal Disease Center (PIADC). This effort has the potential to improve our nation's ability to discriminate between foreign animal diseases and those that are endemic using a single assay, thereby increasing our ability to protect animal populations of high economic importance in the United States. Under 2005 DHS funding we have developed multiplexed (MUX) nucleic-acid-based PCR assays that combine foot-and-mouth disease virus (FMDV) detection with rule-out tests for two other foreign animal diseases Vesicular Exanthema of Swine (VESV) and Swine Vesicular Disease (SVD) and four other domestic viral diseases Bovine Viral Diarrhea Virus (BVDV), Bovine Herpes Virus 1 (BHV-1 or Infectious Bovine Rhinotracheitus IBR), Bluetongue virus (BTV) and Parapox virus complex (which includes Bovine Papular Stomatitis Virus BPSV, Orf of sheep, and Pseudocowpox). Under 2006 funding we have developed a Multiplexed PCR [MUX] porcine assay for detection of FMDV with rule out tests for VESV and SVD foreign animal diseases in addition to one other domestic vesicular animal disease vesicular stomatitis virus (VSV) and one domestic animal disease of swine porcine reproductive and respiratory syndrome (PRRS). We have also developed a MUX bovine assay for detection of FMDV with rule out tests for the two bovine foreign animal diseases malignant catarrhal fever (MCF), rinderpest virus (RPV) and the domestic diseases vesicular stomatitis virus (VSV), bovine viral diarrhea virus (BVDV), infectious bovine rhinotracheitus virus (BHV-1), bluetongue virus (BTV), and the Parapox viruses which are of two bovine types bovine papular stomatitis virus (BPSV) and psuedocowpox (PCP). This document provides details of signature generation, evaluation, and testing, as well as the specific methods and materials used. A condensed summary of the development, testing and performance of the multiplexed assay panel was presented in a 126 page separate document, entitled 'Development and Characterization of A Multiplexed RT-PCR Species Specific Assay for Bovine and one for Porcine Foot-and-Mouth Disease Virus Rule-Out'. This supplemental document provides additional details of large amount of data collected for signature generation, evaluation, and testing, as well as the specific methods and materials used for all steps in the assay development and utilization processes. In contrast to last years effort, the development of the bovine and porcine panels is pending additional work to complete analytical characterization of FMDV, VESV, VSV, SVD, RPV and MCF. The signature screening process and final panel composition impacts this effort. The unique challenge presented this year was having strict predecessor limitations in completing characterization, where efforts at LLNL must preceed efforts at PIADC, such challenges were alleviated in the 2006 reporting by having characterization data from the interlaboratory comparison and at Plum Island under AgDDAP project. We will present an addendum at a later date with additional data on the characterization of the porcine and bovine multiplex assays when that data is available.

  2. Smart infrastructure for carbon foot print analysis of Electric Vehicles V Suresh, G Hill, Prof P T Blythe

    E-Print Network [OSTI]

    Newcastle upon Tyne, University of

    ]. Manuscript received April 11, 2010. This work was supported in part by the U.K Technology Strategy Board T Blythe Abstract-- Electric powered vehicles use energy stored in some form of battery for the vehicle under different conditions. By measuring the energy usage on any particular journey the equivalent

  3. Work for Others (Non-Department of Energy Funded Work)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2005-01-24

    Work for Others is the performance of work for non-Department of Energy (DOE) entities by DOE/National Nuclear Security Administration (NNSA) and/or their respective contractor personnel or the use of DOE/NNSA facilities that is not directly funded by DOE appropriations. Cancels DOE O 481.1B. Certified 1-13-11. Admin Chg 1, dated 3-14-11, cancels DOE O 481.1C. Admin Chg 2, dated 3-9-15, cancels DOE O 481.1C Admin Chg 1

  4. September 2012, Work Force Retention Work Group Status Overview

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LIST OF APPLICABLE DIRECTIVES Pursuant to theDepartmentWork Force Retention Work Group

  5. Radiological Work Planning and Procedure

    SciTech Connect (OSTI)

    KURTZ, J.E.

    2000-01-01

    Each facility is tasked with maintaining personnel radiation exposure as low as reasonably achievable (ALARA). A continued effort is required to meet this goal by developing and implementing improvements to technical work documents (TWDs) and work performance. A review of selected TWDs from most facilities shows there is a need to incorporate more radiological control requirements into the TWD. The Radioactive Work Permit (RWP) provides a mechanism to place some of the requirements but does not provide all the information needed by the worker as he/she is accomplishing the steps of the TWD. Requiring the engineers, planners and procedure writers to put the radiological control requirements in the work steps would be very easy if all personnel had a strong background in radiological work planning and radiological controls. Unfortunately, many of these personnel do not have the background necessary to include these requirements without assistance by the Radiological Control organization at each facility. In addition, there seems to be confusion as to what should be and what should not be included in the TWD.

  6. Master of Social Work Program School of Social Work

    E-Print Network [OSTI]

    Su, Xiao

    within are intended to guide and facilitate the educational experience of our graduate students, details of Social Work Program Overview 11 Mission and Goals 11 General Organization and Administration Professional and Academic Advising for MSW Students 28 Concerns about the MSW Program 28 General University

  7. Federal Utility Partnership Working Group Meeting: Washington...

    Energy Savers [EERE]

    Utility Partnership Working Group Meeting: Washington Update Federal Utility Partnership Working Group Meeting: Washington Update Federal Utility Partnership Working Group Meeting:...

  8. Coiled tubing working life prediction

    SciTech Connect (OSTI)

    Wu, J.

    1995-12-31

    Failure of coiled tubing, due to the repeated bending and plastic deformation of coiled tubing on and off the reel and gooseneck, is of great concern in coiled tubing operations. This paper discusses the coiled tubing working life based on one of the coiled tubing life models published in the literature, and compares the results with other models. Certain agreements are found among these models. A group of curves is presented to illustrate the coiled tubing working life affected by coiled tubing size and wall thickness, internal pressure, yield strength, reel diameter, gooseneck radius, operation condition (corrosion) and butt-welded connection (stress concentration). The results show that coiled tubing life can be greatly increased by increasing CT wall thickness and CT strength, while the coiled tubing working life decreases under high internal pressure, corrosion, and butt-weld conditions. These curves can be easily used in estimating coiled tubing life for the field use.

  9. Diagnostic evaluation of a multiplexed RT-PCR microsphere array assay for the detection of foot-and-mouth disease virus and look-alike disease viruses

    SciTech Connect (OSTI)

    Hindson, B J; Reid, S M; Baker, B R; Ebert, K; Ferris, N P; Bentley Tammero, L F; Lenhoff, R J; Naraghi-Arani, P; Vitalis, E A; Slezak, T R; Hullinger, P J; King, D P

    2007-07-26

    A high-throughput multiplexed assay was developed for the differential laboratory diagnosis of foot-and-mouth disease virus (FMDV) from viruses which cause clinically similar diseases of livestock. This assay simultaneously screens for five RNA and two DNA viruses using multiplexed reverse transcription PCR (mRT-PCR) amplification coupled with a microsphere hybridization array and flow-cytometric detection. Two of the seventeen primer-probe sets included in this multiplex assay were adopted from previously characterized real-time RT-PCR (rRT-PCR) assays for FMDV. The diagnostic accuracy of the mRT-PCR was evaluated using 287 field samples, including 248 (true positive n= 213, true negative n=34) from suspect cases of foot-and-mouth disease collected from 65 countries between 1965 and 2006 and 39 true negative samples collected from healthy animals. The mRT-PCR assay results were compared with two singleplex rRT-PCR assays, using virus isolation with antigen-ELISA as the reference method. The diagnostic sensitivity of the mRT-PCR assay for FMDV was 93.9% [95% C.I. 89.8-96.4%], compared to 98.1% [95% C.I. 95.3-99.3%] for the two singleplex rRT-PCR assays used in combination. In addition, the assay could reliably differentiate between FMDV and other vesicular viruses such as swine vesicular disease virus and vesicular exanthema of swine virus. Interestingly, the mRT-PCR detected parapoxvirus (n=2) and bovine viral diarrhea virus (n=2) in clinical samples, demonstrating the screening potential of this mRT-PCR assay to identify viruses in FMDV-negative material not previously recognized using focused single-target rRT-PCR assays.

  10. Long working distance interference microscope

    DOE Patents [OSTI]

    Sinclair, Michael B.; DeBoer, Maarten P.; Smith, Norman F.

    2004-04-13

    Disclosed is a long working distance interference microscope suitable for three-dimensional imaging and metrology of MEMS devices and test structures on a standard microelectronics probe station. The long working distance of 10-30 mm allows standard probes or probe cards to be used. This enables nanometer-scale 3-D height profiles of MEMS test structures to be acquired across an entire wafer. A well-matched pair of reference/sample objectives is not required, significantly reducing the cost of this microscope, as compared to a Linnik microinterferometer.

  11. PAPIERS DE RECHERCHE WORKING PAPERS

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    MODEL OF SCHOLARLY PUBLICATIONS François Thérin hal-00451852,version1-1Feb2010 #12;Working Papers Series of Scholarly Publications Jean-Philippe Rennard GEM 12 Rue Pierre Sémard, 38003 Grenoble, France jean of scholarly publications. "If I have seen further it is by standing upon the shoulders of giants." The famous

  12. WORKING TITLES GUIDELINES HUMAN RESOURCES

    E-Print Network [OSTI]

    Su, Xiao

    titles for staff indicate an employee's functional responsibility, particularly when the classification are commonly used on business cards and in directories and in other correspondence with constituents the classification title. B. Working titles may be used to better communicate an employee's area of responsibility

  13. How Minds Work Schema Mechanism

    E-Print Network [OSTI]

    Memphis, University of

    1 How Minds Work Schema Mechanism Stan Franklin Computer Science Division & Institute for Intelligent Systems The University of Memphis #12;HMW: Schema Mechanism 2 Schema Mechanism · Implements early stages of Piaget's theory of child development · A mechanism of mind · Controls a body

  14. How Minds Work Brains, Ontologies &

    E-Print Network [OSTI]

    Memphis, University of

    or software agent is a virtual machine implemented on another virtual machine · The minds of humans or animals are virtual machines implemented on brains #12;Brains, Ontologies & Virtual Machines 13 Virtual1 How Minds Work Brains, Ontologies & Virtual Machines Stan Franklin Computer Science Division

  15. My PhD Plan Completed Work

    E-Print Network [OSTI]

    Ruina, Andy L.

    Background My PhD Plan Completed Work Planned Work Hierarchical Biped Control A Exam Matthew Kelly August 4, 2014 Matthew Kelly Hierarchical Biped Control 1 / 34 #12;Background My PhD Plan Completed Work Planned Work Table of Contents 1 Background 2 My PhD Plan 3 Completed Work 4 Planned Work Push Hold Free

  16. Gearing Up for Electric Cars

    E-Print Network [OSTI]

    Sperling, Daniel

    1994-01-01

    ~m¢ as one of 22 cndcal technologies for the nation’s eco-technologies cheaply and well If ~Lhefederal government to is d~rect the UmtedStates toward an environmentally bemgn and eco-

  17. ASME95_Gear.PDF

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsicloudden Documentation DataStreamsTotalproposals due FebruaryASC-ATP-001performedP.

  18. ARM - Engineering Work Request & Engineering Work Order Guidelines

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Comments? WeDatastreamstps DocumentationAtlanticENA Contacts ENA Related Links FacilitiesChange RequestWork

  19. file://\\Bellview\TeamWorks\TRUTeamWorks.PDF

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorkingLosThe 26th Annual Conference onDickAlThe HonorableJohnJohnTotal

  20. file://\\Bellview\TeamWorks\TRUTeamWorks.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorkingLosThe 26th Annual Conference onDickAlThe HonorableJohnJohnTotal9/04

  1. file://\\Bellview\TeamWorks\TRUTeamWorks.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorkingLosThe 26th Annual Conference onDickAlThe

  2. file://\\Bellview\TeamWorks\TRUTeamWorks.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorkingLosThe 26th Annual Conference onDickAlThe30/03 Shipments expected this

  3. file://\\Bellview\TeamWorks\TRUTeamWorks.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorkingLosThe 26th Annual Conference onDickAlThe30/03 Shipments expected

  4. file://\\Bellview\TeamWorks\TRUTeamWorks.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorkingLosThe 26th Annual Conference onDickAlThe30/03 Shipments expected8/03

  5. http://bellview/TeamWorks/TRUTeamWorks.PDF

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorkingLosThe 26th AnnualHistory Over 100 Years ofHousing Unit Tables3, 08

  6. http://bellview/TeamWorks/TRUTeamWorks.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorkingLosThe 26th AnnualHistory Over 100 Years ofHousing Unit Tables3,

  7. http://bellview/TeamWorks/TRUTeamWorks.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorkingLosThe 26th AnnualHistory Over 100 Years ofHousing Unit Tables3,2/04

  8. http://bellview/TeamWorks/TRUTeamWorks.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorkingLosThe 26th AnnualHistory Over 100 Years ofHousing Unit

  9. http://bellview/TeamWorks/TRUTeamWorks.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorkingLosThe 26th AnnualHistory Over 100 Years ofHousing UnitThursday,

  10. http://bellview/TeamWorks/TRUTeamWorks.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorkingLosThe 26th AnnualHistory Over 100 Years ofHousing UnitThursday, A

  11. http://bellview/TeamWorks/TRUTeamWorks.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorkingLosThe 26th AnnualHistory Over 100 Years ofHousing UnitThursday, A| NRC

  12. http://bellview/TeamWorks/TRUTeamWorks.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorkingLosThe 26th AnnualHistory Over 100 Years ofHousing UnitThursday, A|

  13. http://bellview/TeamWorks/TRUTeamWorks.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorkingLosThe 26th AnnualHistory Over 100 Years ofHousing UnitThursday, A|9/03

  14. http://bellview/TeamWorks/TRUTeamWorks.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorkingLosThe 26th AnnualHistory Over 100 Years ofHousing UnitThursday,

  15. http://bellview/TeamWorks/TRUTeamWorks.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorkingLosThe 26th AnnualHistory Over 100 Years ofHousing UnitThursday,3/03 |

  16. http://bellview/TeamWorks/TRUTeamWorks.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorkingLosThe 26th AnnualHistory Over 100 Years ofHousing UnitThursday,3/03

  17. http://bellview/TeamWorks/TRUTeamWorks.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorkingLosThe 26th AnnualHistory Over 100 Years ofHousing

  18. http://bellview/TeamWorks/TRUTeamWorks.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorkingLosThe 26th AnnualHistory Over 100 Years ofHousing04/03 | Shipments

  19. http://bellview/TeamWorks/TRUTeamWorks.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorkingLosThe 26th AnnualHistory Over 100 Years ofHousing04/03 | Shipments1/03

  20. Relationships among Perceived Working Hours, General Stress, Work Centrality, Job Control, Job Demands, and Work Condition Constraints 

    E-Print Network [OSTI]

    Kim, Se Hoon

    2014-06-27

    the relationships among perceived working hours, general stress, work centrality, job control, job demands, and work condition constraints for full-time employees in the United States and Korea. A self-administered questionnaire survey approach was used to collect...

  1. Educating future social work administrators

    E-Print Network [OSTI]

    Ezell, Mark; Austin, M. J.

    2004-01-01

    of an innovative approach to taking stock of the educational isues facing MSW students who specialize in administration, their faculty, and, to some degre, the social work profesion. For the first time in its 25 year history, the Editorial Board convened a Board... one of the first in-depth asesments of the impact of fieldwork on the carers of MSW graduates. As an exploratory study, it poses many questions about the quality and intensity of administrative fieldwork and the need for national data. Some other...

  2. Perma Works | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland:NPIProtectio ProgramInformation 9thPerformance-BasedPerma Works Jump to:

  3. Working with SRNL - Technology Partnerships

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservationBio-Inspired SolarAbout /Two0Photos andSeminarsDesignIn theWorking SRNL Home

  4. Working with SRNL - Technology Partnerships

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservationBio-Inspired SolarAbout /Two0Photos andSeminarsDesignIn theWorking SRNL Home13/2015

  5. Working with SRNL - Technology Transfer

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservationBio-Inspired SolarAbout /Two0Photos andSeminarsDesignIn theWorking SRNL

  6. Mixed Waste Working Group report

    SciTech Connect (OSTI)

    Not Available

    1993-11-09

    The treatment of mixed waste remains one of this country`s most vexing environmental problems. Mixed waste is the combination of radioactive waste and hazardous waste, as defined by the Resource Conservation and Recovery Act (RCRA). The Department of Energy (DOE), as the country`s largest mixed waste generator, responsible for 95 percent of the Nation`s mixed waste volume, is now required to address a strict set of milestones under the Federal Facility Compliance Act of 1992. DOE`s earlier failure to adequately address the storage and treatment issues associated with mixed waste has led to a significant backlog of temporarily stored waste, significant quantities of buried waste, limited permanent disposal options, and inadequate treatment solutions. Between May and November of 1993, the Mixed Waste Working Group brought together stakeholders from around the Nation. Scientists, citizens, entrepreneurs, and bureaucrats convened in a series of forums to chart a course for accelerated testing of innovative mixed waste technologies. For the first time, a wide range of stakeholders were asked to examine new technologies that, if given the chance to be tested and evaluated, offer the prospect for better, safer, cheaper, and faster solutions to the mixed waste problem. In a matter of months, the Working Group has managed to bridge a gap between science and perception, engineer and citizen, and has developed a shared program for testing new technologies.

  7. Writing parallel programs that work

    E-Print Network [OSTI]

    CERN. Geneva

    2012-01-01

    Serial algorithms typically run inefficiently on parallel machines. This may sound like an obvious statement, but it is the root cause of why parallel programming is considered to be difficult. The current state of the computer industry is still that almost all programs in existence are serial. This talk will describe the techniques used in the Intel Parallel Studio to provide a developer with the tools necessary to understand the behaviors and limitations of the existing serial programs. Once the limitations are known the developer can refactor the algorithms and reanalyze the resulting programs with the tools in the Intel Parallel Studio to create parallel programs that work. About the speaker Paul Petersen is a Sr. Principal Engineer in the Software and Solutions Group (SSG) at Intel. He received a Ph.D. degree in Computer Science from the University of Illinois in 1993. After UIUC, he was employed at Kuck and Associates, Inc. (KAI) working on auto-parallelizing compiler (KAP), and was involved in th...

  8. Searching For Work with a Criminal Record

    E-Print Network [OSTI]

    Smith, Sandra Susan; Broege, Nora C. R.

    2012-01-01

    Searching for Work with a Criminal Record Lopoo, Leonard M.Searching for Work with a Criminal Record R EFERENCES Autor,Searching for Work with a Criminal Record by Shawn Bushway,

  9. Graduate Program Time Limits and Work Schedules

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Time Limits and Work Schedules Graduate Program Time Limits and Work Schedules Point your career towards Los Alamos Lab: work with the best minds on the planet in an inclusive...

  10. Exascale Hardware Architectures Working Group

    SciTech Connect (OSTI)

    Hemmert, S; Ang, J; Chiang, P; Carnes, B; Doerfler, D; Leininger, M; Dosanjh, S; Fields, P; Koch, K; Laros, J; Noe, J; Quinn, T; Torrellas, J; Vetter, J; Wampler, C; White, A

    2011-03-15

    The ASC Exascale Hardware Architecture working group is challenged to provide input on the following areas impacting the future use and usability of potential exascale computer systems: processor, memory, and interconnect architectures, as well as the power and resilience of these systems. Going forward, there are many challenging issues that will need to be addressed. First, power constraints in processor technologies will lead to steady increases in parallelism within a socket. Additionally, all cores may not be fully independent nor fully general purpose. Second, there is a clear trend toward less balanced machines, in terms of compute capability compared to memory and interconnect performance. In order to mitigate the memory issues, memory technologies will introduce 3D stacking, eventually moving on-socket and likely on-die, providing greatly increased bandwidth but unfortunately also likely providing smaller memory capacity per core. Off-socket memory, possibly in the form of non-volatile memory, will create a complex memory hierarchy. Third, communication energy will dominate the energy required to compute, such that interconnect power and bandwidth will have a significant impact. All of the above changes are driven by the need for greatly increased energy efficiency, as current technology will prove unsuitable for exascale, due to unsustainable power requirements of such a system. These changes will have the most significant impact on programming models and algorithms, but they will be felt across all layers of the machine. There is clear need to engage all ASC working groups in planning for how to deal with technological changes of this magnitude. The primary function of the Hardware Architecture Working Group is to facilitate codesign with hardware vendors to ensure future exascale platforms are capable of efficiently supporting the ASC applications, which in turn need to meet the mission needs of the NNSA Stockpile Stewardship Program. This issue is relatively immediate, as there is only a small window of opportunity to influence hardware design for 2018 machines. Given the short timeline a firm co-design methodology with vendors is of prime importance.

  11. WORK PLAN FOR ENVIRONMENTAL WORK PLAN FOR ENVIRONMENTAL WORK PLAN FOR ENVIRONMENTAL

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal Gas &SCE-SessionsSouthReport for the WeldonB10081278 United Statestnv~ronmenrar~WORK PLAN

  12. UPGRADES WORK IN PHILADELPHIA'S HISTORIC BUILDINGS | Department...

    Energy Savers [EERE]

    loan fund. ADDITIONAL RESOURCES REPORTS Final Technical Report Summary of Reported Data Data Dashboard 2011 EnergyWorks Annual Report STORIES & INTERVIEWS "EnergyWorks Grabs...

  13. Federal Utility Partnership Working Group Meeting: Washington...

    Energy Savers [EERE]

    Federal Utility Partnership Working Group Meeting: Washington Update Federal Utility Partnership Working Group Meeting: Washington Update Presentation-given at the Fall 2012...

  14. Federal Utility Partnership Working Group Utility Partners

    Broader source: Energy.gov [DOE]

    Federal Utility Partnership Working Group (FUPWG) utility partners are eager to work closely with Federal agencies to help achieve energy management goals.

  15. Undergraduate Program Time Limits and Work Schedules

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    appointments, post-master's appointments, and GRA students working on a thesis or dissertation are excluded from the 30-hour per week work restriction. Summer...

  16. Energy Department Recognizes Landlords, Tenants Working Together...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Department Recognizes Landlords, Tenants Working Together to Save Energy in Commercial Buildings Energy Department Recognizes Landlords, Tenants Working Together to Save...

  17. Nanoscale Chemical Imaging of a Working Catalyst

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nanoscale Chemical Imaging of a Working Catalyst Nanoscale Chemical Imaging of a Working Catalyst Print Wednesday, 28 January 2009 00:00 The heterogeneous catalysts used in most...

  18. FY 1996 annual work plan

    SciTech Connect (OSTI)

    NONE

    1995-09-30

    In April 1994, the Department of Energy (DOE) Strategic Plan was issued. This Plan presents the Department`s strategic outlook in response to a changing world. It discusses the Department`s unique capabilities; its mission, vision, and core values; and key customer and stakeholder considerations. The DOE Strategic Plan lists business strategies and critical success factors which are intended to aid the Department in accomplishing its mission and reaching its vision of itself in the future. The Office of Inspector General (OIG) has an important role in carrying out the goals and objectives of the Secretary`s Strategic Plan. The ultimate goal of the OIG is to facilitate positive change by assisting its customers, responsible Government officials, in taking actions to improve programs and operations. The Inspector General annually issues his own Strategic Plan that contains program guidance for the next fiscal year. As part of its responsibility in carrying out the OIG mission, the Office of the Deputy Inspector General for Audit Services (Office of Audit Services) publishes an Annual Work Plan that sets forth audits that are planned for the next fiscal year. Selection of these audits is based on the overall budget of the Department, analyses of trends in Departmental operations, guidance contained in the agency`s strategic plans, statutory requirements, and the expressed needs and audit suggestions of Departmental program managers and OIG managers and staff. This work plan includes audits that are carried over from FY 1995 and audits scheduled to start during FY 1996. Audits included in the plan will be performed by OIG staff.

  19. The tale of a modern animal plague: Tracing the evolutionary history and determining the time-scale for foot and mouth disease virus

    SciTech Connect (OSTI)

    Tully, Damien C. Fares, Mario A.

    2008-12-20

    Despite significant advances made in the understanding of its epidemiology, foot and mouth disease virus (FMDV) is among the most unexpected agricultural devastating plagues. While the disease manifests itself as seven immunologically distinct strains their origin, population dynamics, migration patterns and divergence times remain unknown. Herein we have assembled a comprehensive data set of gene sequences representing the global diversity of the disease and inferred the time-scale and evolutionary history for FMDV. Serotype-specific rates of evolution and divergence times were estimated using a Bayesian coalescent framework. We report that an ancient precursor FMDV gave rise to two major diversification events spanning a relatively short interval of time. This radiation event is estimated to have taken place towards the end of the 17th and the beginning of the 18th century giving us the present circulating Euro-Asiatic and South African viral strains. Furthermore our results hint that Europe acted as a possible hub for the disease from where it successfully dispersed elsewhere via exploration and trading routes.

  20. Comparing resolved-sideband cooling and measurement-based feedback cooling on an equal footing: analytical results in the regime of ground-state cooling

    E-Print Network [OSTI]

    Kurt Jacobs; Hendra I. Nurdin; Frederick W. Strauch; Matthew James

    2015-03-19

    We show that in the regime of ground-state cooling, simple expressions can be derived for the performance of resolved-sideband cooling --- an example of coherent feedback control --- and optimal linear measurement-based feedback cooling for a harmonic oscillator. These results are valid to leading order in the small parameters that define this regime. They provide insight into the origins of the limitations of coherent and measurement-based feedback for linear systems, and the relationship between them. These limitations are not fundamental bounds imposed by quantum mechanics, but are due to the fact that both cooling methods are restricted to use only a linear interaction with the resonator. We compare the performance of the two methods on an equal footing --- that is, for the same interaction strength --- and confirm that coherent feedback is able to make much better use of the linear interaction than measurement-based feedback. We find that this performance gap is caused not by the back-action noise of the measurement but by the projection noise. We also obtain simple expressions for the maximal cooling that can be obtained by both methods in this regime, optimized over the interaction strength.

  1. Work Force Planning for Public Power Utilities

    E-Print Network [OSTI]

    Work Force Planning for Public Power Utilities: Ensuring Resources to Meet Projected.............................................................................20 #12;ii Work Force Planning for Public Power Utilities #12;1 Work Force Planning for Public Power as a result of the aging work force; and · Public power utilities need to do more to plan for their future

  2. Current work in energy analysis

    SciTech Connect (OSTI)

    1998-03-01

    This report describes the work performed at Berkeley Lab most recently. One of the Labs accomplishments is the publication of Scenarios of US Carbon Reductions, an analysis of the potential of energy technologies to reduce carbon emissions in the US. This analysis is described and played a key role in shaping the US position on climate change in the Kyoto Protocol negotiations. The Labs participation in the fundamental characterization of the climate change issue by the IPCC is described. Described also is a study of leaking electricity, which is stimulating an international campaign for a one-watt ceiling for standby electricity losses from appliances. This ceiling has the potential to save two-thirds of the 5% of US residential electricity currently expended on standby losses. The 54 vignettes contained in the report summarize results of research activities ranging in scale from calculating the efficacy of individual lamp ballasts to estimating the cost-effectiveness of the national Energy Star{reg_sign} labeling program, and ranging in location from a scoping study of energy-efficiency market transformation in California to development of an energy-efficiency project in the auto parts industry in Shandong Province, China.

  3. Hadron Colliders Working Group Report

    SciTech Connect (OSTI)

    S. Peggs and M.J. Syphers

    2001-11-08

    The ''point design'' studied this year shows that a staged VLHC (40, {approx} 200 TeV) is feasible, with no insurmountable challenges. Further work can provide a more optimized design, by studying various alternative field strengths (e.g., superferric magnets for Stage 1) for improvements to vacuum, wall impedance, and other major performance parameters. It may be that a ''single-stage'' scenario for accessing higher energies sooner is the correct approach. A next-step design study should be considered to look at the two cases near to and complementary to the 2001 VLHC Design Study. The effectiveness of photon stops and their engineering design need to be addressed in the near future to truly determine if these devices can lead this effort to even higher luminosities and energies. The superbunch approach should continue to be studied, as well as IR designs, new instrumentation and diagnostics, and beam dynamics issues. Finally, a well organized VLHC-motivated beam studies effort should become part of the national program.

  4. Fiscal year 1990 Rocky Flats Plant Environmental Restoration program Current-Year Work Plan

    SciTech Connect (OSTI)

    Nielsen, T. ); Waage, E.; Miller, D. Corp., Boulder, CO )

    1990-01-01

    The Rocky Flats Plant (RFP) is a nuclear weapons manufacturing facility currently operated by EG G for the US Department of Energy (DOE). RFP is located at the foot of the Rocky Mountains in Jefferson Country, Colorado. The Fiscal Year 1990 (FY90) Current-Year Work Plan (CYWP) is intended to serve as a guidance document for the Environmental Restoration (ER) and RCRA Compliance programs that will be implemented at RFP. The CYWP provides in one document any cross-references necessary to understand the interrelationships between the CYWP and the DOE Five-Year Plan (FYP), Site-Specific Plan (SSP), and other related documents. The scope of this plan includes comparison of planned FY90 ER activities to those actually achieved. The CYWP has been updated to include Colorado Department of Health (CDH), US Environmental Protection Agency (EPA), and DOE Inter-Agency Agreement ER activities. It addresses hazardous wastes, radioactive wastes, mixed wastes (radioactive and hazardous), and sanitary wastes. The CYWP also addresses facilities and sites contaminated with or used in management of those wastes.

  5. Elmira Stove Works: Order (2011-CE-1407)

    Broader source: Energy.gov [DOE]

    DOE ordered Elmira Stove Works to pay a $6,000 civil penalty after finding Elmira Stove Works had failed to certify that certain models of refrigerator-freezers comply with the applicable energy conservation standard.

  6. Selecting and Working with a Broker 

    E-Print Network [OSTI]

    Waller, Mark L.; McCorkle, Dean; Welch, Mark

    2008-10-17

    Producers who wish to trade futures or options contracts will need to work with a broker. These tips can help in selecting a broker and in forging a good working relationship....

  7. Work Plan FY 2015 | Department of Energy

    Energy Savers [EERE]

    Work Plan FY 2015 Work Plan FY 2015 Planned Audits and Inspections for FY 2015 A list of audits and inspections planned for FY 2015 by the U.S. Department of Energy, Office of...

  8. Car Ownership and Welfare-to-Work

    E-Print Network [OSTI]

    Ong, Paul M.

    2001-01-01

    Problems Related to Child Car, Transportation, and IllnessCar Ownership and Welfare-to-Work Paul M Ong Reprint UCTC Nofor conte~ts thereof oruse Car Ownership and Welfare-to-Work

  9. How Solar Works | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Fusion Energy Works 33 likes Fusion energy is the energy source of the sun and all of the stars. As part of How Energy Works, we'll cover everything from fuel sources to plasma...

  10. Quality of work – concept and measurement 

    E-Print Network [OSTI]

    Dahlm, Svenn-Åge; Nesheim, Torstein; Olsen, Karen M

    2009-01-01

    In this paper we review some of the most essential literature on the concept and measurement of quality of work. We show that different academic fields have conceptualized quality of work in distinct ways however there has ...

  11. Groundwater Monitoring Well Installation Work Plan

    E-Print Network [OSTI]

    Groundwater Monitoring Well Installation Work Plan CSMRI Site Prepared for: Colorado School;CSMRI Site Groundwater Monitoring Well Installation Work Plan December 6, 2006 Page ii Table of Contents

  12. Catalysis Working Group Meeting: January 2015

    Broader source: Energy.gov [DOE]

    Agenda and presentations from the Catalysis Working Group meeting held January 21, 2015, in Los Alamos, New Mexico.

  13. Agenda: High Temperature Membrane Working Group Meeting

    Broader source: Energy.gov [DOE]

    Agenda for the High Temperature Membrane Working Group (HTMWG) meeting on May 18, 2009, in Arlington, Virginia

  14. Solar Industry at Work | Laila Mattos

    ScienceCinema (OSTI)

    Mattos, Laila

    2013-05-29

    Laila Mattos, a technology manager at Alta Devices, talks about what it means to work for a "disruptive" solar company.

  15. Catalysis Working Group Meeting: June 2015

    Broader source: Energy.gov [DOE]

    Agenda and presentations from the Catalysis Working Group meeting held on June 8, 2015, in Arlington, Virginia.

  16. @ work' video segment features Robotic Software Engineer

    ScienceCinema (OSTI)

    Idaho National Laboratory

    2010-01-08

    @ work highlights Idaho National Laboratory employees and the jobs they perform.This segment features Robotic Software Engineer Miles Walton.

  17. Solar Industry at Work | Laila Mattos

    SciTech Connect (OSTI)

    Mattos, Laila

    2012-01-01

    Laila Mattos, a technology manager at Alta Devices, talks about what it means to work for a "disruptive" solar company.

  18. Motivation : Information Work and Money Understanding entropy

    E-Print Network [OSTI]

    Cockshott, W. Paul

    Motivation : Information Work and Money Understanding entropy Our Results/Contribution Babbage,University of Glasgow SICSA Conf, 2011 Author, WPC Information and production #12;Motivation : Information Work and Money Understanding entropy Our Results/Contribution Outline 1 Motivation : Information Work and Money

  19. BACHELOR OF SOCIAL WORK STUDENT HANDBOOK

    E-Print Network [OSTI]

    Northern British Columbia, University of

    BACHELOR OF SOCIAL WORK STUDENT HANDBOOK & PROGRAM GUIDE 2015 ­ 2016 College of Arts, Social Website: www.unbc.ca/social-work #12;Student Handbook & Program Guide for the Bachelor of Social Work i Telephone: 250-960-6494 Email: amelia.kaiser@unbc.ca #12;Student Handbook & Program Guide for the Bachelor

  20. WHEN WORKFLOW DOESN'T WORK Issues in Managing Dynamic Processes

    E-Print Network [OSTI]

    Corkill, Daniel

    , a landing-gear design specialist is a scarce resource that cannot be quickly supplemented with additional by design activities, present substantial problems for individuals charged with managing their execution. The design mantra of "better, cheaper, faster" is forcing design processes to operate with shorter time

  1. Work and reversibility in quantum thermodynamics

    E-Print Network [OSTI]

    Stephanie Wehner; Mark M. Wilde; Mischa P. Woods

    2015-06-26

    It is a central question in quantum thermodynamics to determine how much work can be gained by a process that transforms an initial state $\\rho$ to a final state $\\sigma$. For example, we might ask how much work can be obtained by thermalizing $\\rho$ to a thermal state $\\sigma$ at temperature $T$ of an ambient heat bath. Here, we show that for large systems, or when allowing slightly inexact catalysis, the amount of work is characterized by how reversible the process is. More specifically, the amount of work to be gained depends on how well we can return the state $\\sigma$ to its original form $\\rho$ without investing any work. We proceed to exhibit an explicit reversal operation in terms of the Petz recovery channel coming from quantum information theory. Our result establishes a quantitative link between the reversibility of thermodynamical processes and the corresponding work gain.

  2. Spotlight on Seattle, Washington: Community Partnerships Work...

    Energy Savers [EERE]

    Making the Program Work for Contractors Better Buildings - Spotlight on Portland, Oregon; Financing and Incetntives: Use Incentives to Get Attention and Encourage Deep Savings...

  3. Mobile machine hazardous working zone warning system

    DOE Patents [OSTI]

    Schiffbauer, William H. (Connellsville, PA); Ganoe, Carl W. (Pittsburgh, PA)

    1999-01-01

    A warning system is provided for a mobile working machine to alert an individual of a potentially dangerous condition in the event the individual strays into a hazardous working zone of the machine. The warning system includes a transmitter mounted on the machine and operable to generate a uniform magnetic field projecting beyond an outer periphery of the machine in defining a hazardous working zone around the machine during operation thereof. A receiver, carried by the individual and activated by the magnetic field, provides an alarm signal to alert the individual when he enters the hazardous working zone of the machine.

  4. Community Power Works Final Report and Conclusions

    SciTech Connect (OSTI)

    Baumel, Christie

    2015-03-09

    This is the final technical report for the City of Seattle's Community Power Works program, funded through the US DOE Better Buildings grant program.

  5. Working With Weatherization Assistance Programs | Department...

    Energy Savers [EERE]

    Assistance Programs Working With Weatherization Assistance Programs Better Buildings Low Income Peer Exchange Call Featuring: Case study on integration of income-qualified...

  6. How to Work with the Media

    Energy Savers [EERE]

    to Work with the Media Julie Colehour, Colehour+Cohen Shannon Johnson, ERG Cassie Goldstein, Energetics Incorporated Welcome * Colehour+Cohen in Seattle, WA Julie...

  7. Lancaster Live/Work Townhome Prototype

    SciTech Connect (OSTI)

    2010-04-01

    This case study describes development of a prototype live-work townhome that is highly efficient at 45% energy savings (95% counting photovoltaic system).

  8. Spotlight on Seattle, Washington: Community Partnerships Work...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Revised July 2011 Version 2 Spotlight on Seattle, Washington: Community Partnerships Work to Extend Program Reach Getting Started 1 Seattle Moves the Needle With the Help of Its...

  9. Car Access and Welfare-To-Work

    E-Print Network [OSTI]

    Ong, Paul M.

    2002-01-01

    Problems Related to Child Car, Transportation, and Illness30. March. Ong, Paul "Work and Car Ownership Among WelfareRice (2000). "The Effect of Car Ownershipon the Employment

  10. Mobile machine hazardous working zone warning system

    DOE Patents [OSTI]

    Schiffbauer, W.H.; Ganoe, C.W.

    1999-08-17

    A warning system is provided for a mobile working machine to alert an individual of a potentially dangerous condition in the event the individual strays into a hazardous working zone of the machine. The warning system includes a transmitter mounted on the machine and operable to generate a uniform magnetic field projecting beyond an outer periphery of the machine in defining a hazardous working zone around the machine during operation. A receiver, carried by the individual and activated by the magnetic field, provides an alarm signal to alert the individual when he enters the hazardous working zone of the machine. 3 figs.

  11. Nanoscale Chemical Imaging of a Working Catalyst

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of chemical processes. Watching Catalysts at Work Catalysts-substances that speed up chemical reactions without themselves being consumed-are essential to the production of...

  12. ASRAC MREF Working Group Notice of Intent

    Broader source: Energy.gov (indexed) [DOE]

    rulemaking process, and instead explore openly with other parties all ideas that may emerge from the working group's discussions. E. Facilitator The facilitator will act as a...

  13. Elements of doing work at SSRL (rev

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    work authorization processes given in http:www- ssrl.slac.stanford.edusafetyindex.html. 5. Ensure procedures are up to date before use. Resources: 1. SSRL safety...

  14. REGULATORY COOPERATION COUNCIL - WORK PLANNING FORMAT: Natural...

    Energy Savers [EERE]

    FORMAT: Natural Gas Use in Transportation REGULATORY COOPERATION COUNCIL - WORK PLANNING FORMAT: Natural Gas Use in Transportation RCC Workplan NGV.PDF More Documents &...

  15. Federal Utility Partnership Working Group - Utility Interconnection...

    Energy Savers [EERE]

    Federal Utility Partnership Working Group (FUPWG) meeting-discusses solarphotovoltaic (PV) projects to connect with utility in California and their issues. fupwgfall12jewell.pd...

  16. Nanoscale Chemical Imaging of a Working Catalyst

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nanoscale Chemical Imaging of a Working Catalyst Print The heterogeneous catalysts used in most chemical processes typically consist of nanoscale metal or metal oxide particles...

  17. Work with Us | Materials Science | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking WithTelecentricNCubictheThepresented in the7 Table7WorkWorkWork with

  18. Work-Life Balance | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking WithTelecentricNCubictheThepresented in the7 Table7WorkWorkWork

  19. WorkPlan: Database for Work Package Production Scheduling Proceedings IGLC '98

    E-Print Network [OSTI]

    Tommelein, Iris D.

    and expressiveness when it comes to supporting production planning and control, that is, supporting those whoWorkPlan: Database for Work Package Production Scheduling Proceedings IGLC '98 WORKPLAN: DATABASE specifically to implement lean production philosophy in construction. KEY WORDS WorkPlan, weekly work plan

  20. Fusion Technology Working Group Presented by

    E-Print Network [OSTI]

    California at Los Angeles, University of

    Snowmass Fusion Technology Working Group Summary Presented by M. Abdou, S. Milora Snowmass July 23, 1999 #12;Technology Working Group Subgroup # 1 Subgroup # 2 Solid Walls Ulrickson / Mattas Liquid Walls / Ying Chamber Technology Abdou / Ulrickson Heating/CD/Fueling Swain / Temkin Magnets Schultz / Woolley

  1. environmental policy working papers udall center

    E-Print Network [OSTI]

    Hoffman, Laura López

    environmental policy working papers udall center for studies in public policy Carrie K. Presnall Environmental Policy Working Papers February 2013 Incorporating an Ecosystem Services Approach in Environmental the potential of using an ecosystem services approach as part of the U.S. National Environmental Policy Act

  2. UNIVERSITY OF TORONTO WORKING AT ELEVATED PLACES

    E-Print Network [OSTI]

    Chan, Hue Sun

    in elevated locations at the University are faced with a potential risk of falling. Persons below these work areas may be at risk from falling objects. These hazards must be significantly reduced through the use including a site specific work plan; Provide notice to the Ontario Ministry of Labour of the nature

  3. Working Group 4 April 25 -30 2000

    E-Print Network [OSTI]

    DIS2000 Working Group 4 April 25 - 30 2000 Liverpool, UK Di#11;ractive D #3;#6; (2010) Production Selection #15; Results from ZEUS and H1 #15; Conclusions #12; DIS2000 | Working Group 4 Jo Cole Why measure states, eg. J= #15; Study of charm provides test of under- lying dynamics of di#11;raction April 2000 2

  4. Proposed Program of Work Thesis Plan

    E-Print Network [OSTI]

    Texas at Arlington, University of

    Proposed Program of Work Thesis Plan Student's Name ) __________________________________________________________ Thesis: CSE 5698 Thesis II 3, 4 1 Students classified as Computer Engineering majors must use Systems you defend your thesis and graduate. 4 CSE 5698 Thesis II requires preparatory research work (CSE 5398

  5. Mechanisms underlying working memory for novel information

    E-Print Network [OSTI]

    Hasselmo, Michael

    Mechanisms underlying working memory for novel information Michael E. Hasselmo and Chantal E. Stern Cummington St, Boston, MA 02215, USA In this Opinion article we describe a theory that the brain mechanisms modeling indicates that mechanisms for maintaining novel information in working memory could differ from

  6. HOW TO WORK WITH MARKETING COMMUNICATIONS

    E-Print Network [OSTI]

    Hamburger, Peter

    HOW TO WORK WITH MARKETING COMMUNICATIONS Reaching IPFW's Customers through Strategic Marketing Communications June 16, 2015 Version 4 #12;TABLE OF CONTENTS 1How to Work with Marketing CommunicationsMarketing, Trademarks, and Artwork Review 5 Our Workflow--The Creative Development Process 6University

  7. Caringscapes: experiences of caring and working 

    E-Print Network [OSTI]

    McKie, Linda; Gregory, Susan; Bowlby, Sophie

    There is growing interest in ways in which people combine working with caring, and what can be done to make the balance of work and care more manageable. In this paper, Linda McKie, Susan Gregory and Sophia Bowlby explore ...

  8. Introduction and Related Works Proposed Method

    E-Print Network [OSTI]

    Lowd, Daniel

    Reducing The Data Trans. in WSN using PCA 1 / 34 ' #12;. . . . . . Outline Introduction and Related Works The Data Trans. in WSN using PCA 2 / 34 ' #12;. . . . . . Outline Introduction and Related Works Proposed Sensor Networks DML 8 Dec 2010 Amirmohammad Rooshenas Reducing The Data Trans. in WSN using PCA 3 / 34

  9. Building an economy that works -for everyone.

    E-Print Network [OSTI]

    Van Volkenburgh, Elizabeth

    Building an economy that works - for everyone. SHB 2720 Pay It Forward: Restoring college access, not based on the cost of their degree or the size of their paycheck. A smart investment in the future, and the Fund becomes self-sustaining by year 17 of the program. Building an economy that works - for everyone

  10. Milagro Magic Paint: Does it Work?

    E-Print Network [OSTI]

    Milagro Magic Paint: Does it Work? John A.J. Matthews and Bill Miller johnm@phys.unm.edu University NM sunshine · Solution was to paint with ASTEC ceramic finish #900 John Matthews/Auger North Meeting/CSU/Feb. 17-19, 2009 ­ p.2/7 #12;Will Milagro magic paint work for Auger? · Fermilab sent us 3 Auger South

  11. Using the Web for Name Authority Work

    E-Print Network [OSTI]

    Whittaker, Beth M.; Spillane, Jodi Lynn

    2001-01-01

    While many catalogers are using the Web to find the information they need to perform authority work quickly and accurately, the full potential of the Web to assist catalogers in name authority work has yet to be realized. The ever-growing nature...

  12. Low work function, stable thin films

    DOE Patents [OSTI]

    Dinh, Long N. (Concord, CA); McLean, II, William (Oakland, CA); Balooch, Mehdi (Berkeley, CA); Fehring, Jr., Edward J. (Dublin, CA); Schildbach, Marcus A. (Livermore, CA)

    2000-01-01

    Generation of low work function, stable compound thin films by laser ablation. Compound thin films with low work function can be synthesized by simultaneously laser ablating silicon, for example, and thermal evaporating an alkali metal into an oxygen environment. For example, the compound thin film may be composed of Si/Cs/O. The work functions of the thin films can be varied by changing the silicon/alkali metal/oxygen ratio. Low work functions of the compound thin films deposited on silicon substrates were confirmed by ultraviolet photoelectron spectroscopy (UPS). The compound thin films are stable up to 500.degree. C. as measured by x-ray photoelectron spectroscopy (XPS). Tests have established that for certain chemical compositions and annealing temperatures of the compound thin films, negative electron affinity (NEA) was detected. The low work function, stable compound thin films can be utilized in solar cells, field emission flat panel displays, electron guns, and cold cathode electron guns.

  13. Internal temperature monitor for work pieces

    DOE Patents [OSTI]

    Berthold, J.W.

    1993-07-13

    A method and apparatus for measuring the internal temperature of a work piece comprises an excitation laser for generating laser pulses which are directed through a water cooled probe, and in an optical fiber, to a first surface of the work piece. The laser is of sufficient intensity to ablate the surface of the work piece, producing a displacement and a resulting ultrasonic pulse which propagates within the thickness of the work piece to an opposite surface. The ultrasonic pulse is reflected from the opposite surface and returns to the first surface to create a second displacement. A second continuous laser also shines its light through an optical fiber in the probe into the first surface and is used in conjunction with signal processing equipment to measure the time between the first and second displacements. This time is proportional to the time-of-flight of the ultrasonic pulse in the work piece which, with a known or detected thickness of the work piece, can be used to calculate the internal temperature of the work piece.

  14. Work and Life Balance | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking WithTelecentricNCubictheThepresented in the7 Table7Work &WorkFlex

  15. Working at CNM | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking WithTelecentricNCubictheThepresented in1: Model or WorkingWorking

  16. Latin America’s New World of Work: Changing Traits of Work and Problem Solving

    E-Print Network [OSTI]

    Collier, Ruth Berins; Palmer-Rubin, Brian

    2011-01-01

    Traits of Work and Problem Solving Ruth Berins Collier Brianwork-based resources for problem solving (size of work-basedof what we will call “problem-solving activities? ” Further,

  17. RISK ASSESSMENT TECHNICAL EXPERT WORKING GROUP

    Broader source: Energy.gov [DOE]

    The Risk Assessment Technical Expert Working Group (RWG) is established to assist the Department of Energy (DOE) with the appropriate and effective use of quantitative risk assessment in nuclear...

  18. The extraction of work from quantum coherence

    E-Print Network [OSTI]

    Kamil Korzekwa; Matteo Lostaglio; Jonathan Oppenheim; David Jennings

    2015-06-25

    We critically assess the problem of extracting work from a coherent superposition of energy eigenstates of an individual qubit system. By carefully taking into account all the resources involved in the thermodynamic transformations in a fully quantum-mechanical treatment, we show that there exists a thermal machine that can come arbitrarily close to extracting all the coherence as work. The machine only needs to act on individual copies of a state and can be reused. On the other hand, we show that for any thermal machine with finite resources not all the coherence of a state can be extracted as work. We provide explicit protocols extracting work from coherence when the resources of a thermal machine are bounded, a scenario potentially relevant for the thermodynamics at the nanoscale.

  19. Putting Science to Work OUR TECHNOLOGIES

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    technologies developed at ORNL's Germanium beads on a zinc oxide nanowire. 2 Putting Science to Work in a large fermenter and "fed" with a starting mixture of selected metal...

  20. INL@Work Hope Lee microbiologist

    SciTech Connect (OSTI)

    Lee, Hope

    2010-01-01

    INL environmental microbiologist Hope Lee is working to develop and apply tools that clean contaminants out of ground water. You can learn more about INL's environmental projects at http://www.facebook.com/idahonationallaboratory.

  1. Reimbursable Work for Department of Homeland Security

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2003-02-28

    To authorize a modified process for the acceptance, performance, and administration of work from the Department of Homeland Security (DHS) by Department of Energy (DOE) contractor and federally operated laboratories, sites, and other facilities.

  2. INL@Work Hope Lee microbiologist

    ScienceCinema (OSTI)

    Lee, Hope

    2013-05-28

    INL environmental microbiologist Hope Lee is working to develop and apply tools that clean contaminants out of ground water. You can learn more about INL's environmental projects at http://www.facebook.com/idahonationallaboratory.

  3. How Do I Work with Chemicals?

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    at the bottom of the chemical safety page of the ESS (example). If you will be using hazardous materials, this work will usually be restricted to a special bench at the...

  4. Jack A. Speer Alcoa Wenatchee Works

    E-Print Network [OSTI]

    Jack A. Speer Alcoa Wenatchee Works 6200 Malaga/Alcoa Highway Malaga, WA 98828 September 12, 2002 economy, and is good policy for the United States. Sincerely, Jack A. Speer Northwest Energy Director #12

  5. What problem are you working on?

    SciTech Connect (OSTI)

    2013-11-21

    Superconductors, supercomputers, new materials, clean energy, big science - ORNL researchers' work is multidisciplinary and world-leading. Hear them explain it in their own words in this video first shown at UT-Battelle's 2013 Awards Night.

  6. What problem are you working on?

    ScienceCinema (OSTI)

    None

    2014-09-15

    Superconductors, supercomputers, new materials, clean energy, big science - ORNL researchers' work is multidisciplinary and world-leading. Hear them explain it in their own words in this video first shown at UT-Battelle's 2013 Awards Night.

  7. Work-life balance across the lifecourse 

    E-Print Network [OSTI]

    Jamieson, Lynn; Morton, Sarah

    In Summer 2004, CRFR held an international conference to explore work-life balance across the lifecourse. This briefing outlines some of the main issues from the conference, explores what we might learn from international comparisons, and makes...

  8. Financial Policy and Procedures for Reimbursable Work

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1988-08-15

    The directive establishes Department-wide financial policy and procedural guidance applicable to performing reimbursable work for other Federal agencies and with non-Federal Government entities, including foreign and commercial entities, State, and political subdivisions.

  9. Return to Work - HPMC Occupational Health Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    days. In some cases, additional testing or evaluation may be needed to assess fitness for duty. We utilize the workers' EJTA to determine if they may safely return to work and...

  10. Water+works : a new ecological infrastructure

    E-Print Network [OSTI]

    Hedstrom, Lisa Kristin

    2011-01-01

    With the global water crisis as catalyst, Water+Works acts as a model for a localized water initiative that will mitigate flooding and provide a freshwater resource in times of crisis, while enriching urban ecosystems and ...

  11. whispers of light | workings of splendor

    E-Print Network [OSTI]

    Reinhart, Catherine Ann

    2012-05-31

    The following thesis outlines the creation of Catherine Reinhart's Master of Fine Arts thesis exhibition, displayed in the Art & Design Gallery at the University of Kansas, March 12 –16, 2012. Whispers of light | workings of splendor was a site...

  12. W Boson Mass Working Group Report

    SciTech Connect (OSTI)

    Kilgore, W.; Kilgore, W.

    2010-06-14

    The W boson mass working group discussed the current status of the W boson mass measurement and the prospects for improving on LEP and Tevatron measurements at the LHC.

  13. How Solar Works | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Sort by: Random | Alphabetical | Rating (High to Low) | Rating (Low to High) How Fusion Energy Works 33 likes Fusion energy is the energy source of the sun and all of the stars....

  14. “Friday off”: Reducing Working Hours in Europe

    E-Print Network [OSTI]

    Kallis, Giorgos

    This article explores the pros and cons for reducing working hours in Europe. To arrive to an informed judgment we review critically the theoretical and empirical literature, mostly from economics, concerning the relation ...

  15. Water as a thermoacoustic working fluid

    SciTech Connect (OSTI)

    Swift, G.W.

    1988-01-01

    This short report, addressed only to the thermoacoustic cognoscenti, discusses thermodynamic and transport properties of water with emphasis on water's virtues as a thermoacoustic working fluid. Short-stack-approximation calculations are presented, showing that water is a good working fluid. A very rough design for a sound source using water is also presented as a starting point for discussing the merits and difficulties of this technology. 4 figs.

  16. Work Project Report: Static Analysis Suite

    E-Print Network [OSTI]

    Bartek, Filip

    2013-01-01

    This summer, I was working in PH-SFT group as a summer student. My assignment consisted of developing a software tool for static analysis of C++ code. The tool is called Static Analysis Suite. This document describes the project - the initial goal, the domain of interest, i.e. static program analysis, the work I performed and the tools I used, and the results.

  17. Contact electrification and the work of adhesion

    E-Print Network [OSTI]

    B. N. J. Persson; M. Scaraggi; A. I. Volokitin

    2013-05-13

    We present a general theory for the contribution from contact electrification to the work necessary to separate two solid bodies. The theory depends on the surface charge density correlation function, which we deduce from Kelvin Force Microscopy (KFM) maps of the surface electrostatic potential. For silicon rubber (polydimethylsiloxane, PDMS) we discuss in detail the relative importance of the different contributions to the observed work of adhesion.

  18. Stirling engine with air working fluid

    DOE Patents [OSTI]

    Corey, John A. (North Troy, NY)

    1985-01-01

    A Stirling engine capable of utilizing air as a working fluid which includes a compact heat exchange module which includes heating tube units, regenerator and cooler positioned about the combustion chamber. This arrangement has the purpose and effect of allowing the construction of an efficient, high-speed, high power-density engine without the use of difficult to seal light gases as working fluids.

  19. Working with NIST | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematics And Statistics » USAJobs SearchAMERICA'SEnergy Safely Tear Down Towers|WorkingWorking with

  20. RefWorks for Business: Basics Ways to Get References into RefWorks

    E-Print Network [OSTI]

    Haykin, Simon

    time. Type in your search terms. 5. Import from a text file. This method works for some onlineWorks function is located along side the print, e-mail, save and download functions. 2. Manually enter references. Search and import from an online catalogue within RefWorks. You can search and import references from

  1. Energy Advisors at Work: Charity Work Practices to Support People in Fuel Poverty

    E-Print Network [OSTI]

    Energy Advisors at Work: Charity Work Practices to Support People in Fuel Poverty Joel E. Fischer to people in fuel poverty. Our fieldwork comprises detailed observations that reveal the collaborative design challenges that relate the domestic fuel poverty setting to the wider Ubicomp literature. Our work

  2. Reexamination of Pure Qubit Work Extraction

    E-Print Network [OSTI]

    Max F. Frenzel; David Jennings; Terry Rudolph

    2014-11-19

    Many work extraction or information erasure processes in the literature involve the raising and lowering of energy levels via external fields. But even if the actual system is treated quantum mechanically, the field is assumed to be classical and of infinite strength, hence not developing any correlations with the system or experiencing back-actions. We extend these considerations to a fully quantum mechanical treatment, by studying a spin-1/2 particle coupled to a finite-sized directional quantum reference frame, a spin-l system, which models an external field. With this concrete model together with a bosonic thermal bath, we analyse the back-action a finite-size field suffers during a quantum-mechanical work extraction process, the effect this has on the extractable work, and highlight a range of assumptions commonly made when considering such processes. The well-known semi-classical treatment of work extraction from a pure qubit predicts a maximum extractable work W = kT log 2 for a quasi-static process, which holds as a strict upper bound in the fully quantum mechanical case, and is only attained in the classical limit. We also address the problem of emergent local time-dependence in a joint system with globally fixed Hamiltonian.

  3. Community Power Works for Small Business | Department of Energy

    Energy Savers [EERE]

    Works for Small Business Community Power Works for Small Business Information on Community Power Works in Seattle and their small business offerings, Capitol Hill Chamber of...

  4. Better Buildings Working with Utilities Peer Exchange Call: Kick...

    Energy Savers [EERE]

    Better Buildings Working with Utilities Peer Exchange Call: Kick-off Better Buildings Working with Utilities Peer Exchange Call: Kick-off Better Buildings Working with Utilities...

  5. Clean Energy Works Oregon (CEWO) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    an exploration of Clean Energy Works Oregon's loan offerings its on-bill program to date. Clean Energy Works Oregon More Documents & Publications Clean Energy Works Oregon (CEWO)...

  6. Clean Energy Works Oregon (CEWO) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Clean Energy Works Oregon's program background and the four easy steps to lender selection. Clean Energy Works Oregon More Documents & Publications Clean Energy Works Oregon (CEWO)...

  7. DOE Work Breakdown Structure Handbook | Department of Energy

    Office of Environmental Management (EM)

    Work Breakdown Structure Handbook DOE Work Breakdown Structure Handbook This handbook provides suggested guidance and best practices on the development of product-oriented Work...

  8. Community Power Works: Good Jobs, Green Jobs Conference | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Works: Good Jobs, Green Jobs Conference Community Power Works: Good Jobs, Green Jobs Conference A presentation given by Community Power Works at the Good Jobs, Green Jobs...

  9. The Minimal Work Cost of Information Processing

    E-Print Network [OSTI]

    Philippe Faist; Frédéric Dupuis; Jonathan Oppenheim; Renato Renner

    2015-07-07

    Irreversible information processing cannot be carried out without some inevitable thermodynamical work cost. This fundamental restriction, known as Landauer's principle, is increasingly relevant today, as the energy dissipation of computing devices impedes the development of their performance. Here we determine the minimal work required to carry out any logical process, for instance a computation. It is given by the entropy of the discarded information conditional to the output of the computation. Our formula takes precisely into account the statistically fluctuating work requirement of the logical process. It enables the explicit calculation of practical scenarios, such as computational circuits or quantum measurements. On the conceptual level, our result gives a precise and operationally justified connection between thermodynamic and information entropy, and explains the emergence of the entropy state function in macroscopic thermodynamics.

  10. Method of making low work function component

    DOE Patents [OSTI]

    Robinson, Vance (Niskayuna, NY); Weaver, Stanton Earl (Northville, NY); Michael, Joseph Darryl (Delmar, NY)

    2011-11-15

    A method for fabricating a component is disclosed. The method includes: providing a member having an effective work function of an initial value, disposing a sacrificial layer on a surface of the member, disposing a first agent within the member to obtain a predetermined concentration of the agent at said surface of the member, annealing the member, and removing the sacrificial layer to expose said surface of the member, wherein said surface has a post-process effective work function that is different from the initial value.

  11. Burn site groundwater interim measures work plan.

    SciTech Connect (OSTI)

    Witt, Jonathan L. (North Wind, Inc., Idaho Falls, ID); Hall, Kevin A. (North Wind, Inc., Idaho Falls, ID)

    2005-05-01

    This Work Plan identifies and outlines interim measures to address nitrate contamination in groundwater at the Burn Site, Sandia National Laboratories/New Mexico. The New Mexico Environment Department has required implementation of interim measures for nitrate-contaminated groundwater at the Burn Site. The purpose of interim measures is to prevent human or environmental exposure to nitrate-contaminated groundwater originating from the Burn Site. This Work Plan details a summary of current information about the Burn Site, interim measures activities for stabilization, and project management responsibilities to accomplish this purpose.

  12. Reduce Steam Trap Failures at Chambers Works 

    E-Print Network [OSTI]

    Kouba, C.

    2010-01-01

    Failures at Chambers Works GB/BB Name: Cyndi Kouba Mentor/MBB: Andrew Degraff Team Members Michael Crowley(Site Energy Lead), (Charlie) Flanigan (Aramids-maintenance), Ben Snyder (Aramids-ATO), Michael Scruggs (Central Maintenance Mechanic), Rick... is it sustainable HOW we went about finding a solution What do you have learn from this 10/20/2010 3 Six Sigma Methodology was KEY to success Savings: $1MM annualized in only 6 months! 10/20/2010 4Define: Project CTQ?s Customer: Chambers Works site Voice...

  13. Work for Others | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservationBio-Inspired SolarAbout /Two0Photos andSeminarsDesign Renewable 3.591442U.S.WorkWork

  14. Work with Argonne | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfateSciTechtail.Theory ofDidDevelopmentatabout Who Works for NIF & PS? TheWindows,Work with

  15. Working at SLAC | Linac Coherent Light Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking WithTelecentricNCubictheThepresented in1: Model orWorking at SLAC View

  16. NREL: Photovoltaics Research - Working with Us

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformationJessework usesof EnergyY-12WorkingSolar Energy Research FacilityWorking with

  17. Work Plan FY 2016 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative FuelsofProgram: Report1538-1950DepartmentWaveWind ProgramWork Plan FY 2016 Work Plan

  18. Group Work: Global warming & natural variability

    E-Print Network [OSTI]

    Allan, Richard P.

    Group Work: Global warming & natural variability Left: Global annual temperature departure from://skepticalscience.com/foster-and-rahmstorf-measure-global-warming-signal.html 2013 2012 2011 #12;: 1963-1964, 1982-83, 1991-93 1. How do these events affect the global annual temperature and can you

  19. ICDF Complex Remedial Action Work Plan

    SciTech Connect (OSTI)

    W. M. Heileson

    2006-12-01

    This Remedial Action Work Plan provides the framework for operation of the Idaho Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Disposal Facility Complex (ICDF). This facility includes (a) an engineered landfill that meets the substantial requirements of DOE Order 435.1, Resource Conservation and Recovery Act Subtitle C, Idaho Hazardous Waste Management Act, and Toxic Substances Control Act polychlorinated biphenyl landfill requirements; (b) centralized receiving, inspections, administration, storage/staging, and treatment facilities necessary for CERCLA investigation-derived, remedial, and removal waste at the Idaho National Laboratory (INL) prior to final disposition in the disposal facility or shipment off-Site; and (c) an evaporation pond that has been designated as a corrective action management unit. The ICDF Complex, including a buffer zone, will cover approximately 40 acres, with a landfill disposal capacity of approximately 510,000 yd3. The ICDF Complex is designed and authorized to accept INL CERCLA-generated wastes, and includes the necessary subsystems and support facilities to provide a complete waste management system. This Remedial Action Work Plan presents the operational approach and requirements for the various components that are part of the ICDF Complex. Summaries of the remedial action work elements are presented herein, with supporting information and documents provided as appendixes to this work plan that contain specific detail about the operation of the ICDF Complex. This document presents the planned operational process based upon an evaluation of the remedial action requirements set forth in the Operable Unit 3-13 Final Record of Decision.

  20. Working with Department Enhancing Department Climate

    E-Print Network [OSTI]

    Sheridan, Jennifer

    Working with Department Chairs: Enhancing Department Climate #12;The Department Climate Survey 21% Graduate Student 232 21% No response/blank 31 3% Total 1121 100% #12;Findings: Overall Department Climate Score Mean overall climate score = 3.72 (scale of 1-5) Rating N % Very negative (1) 30 2.7% Negative (2

  1. Alan Turing HIS WORK AND IMPACT

    E-Print Network [OSTI]

    Maini, Philip K.

    #12;Alan Turing HIS WORK AND IMPACT Edited by S. BARRY COOPER University of Leeds, UK and JAN VAN? This was what Turing saw as the fundamental problem. Reference Hodges, A., 1983. Alan Turing: The Enigma, Burnett Books, London. And Philip K. Maini wonders at -- TURING'S THEORY OF MORPHOGENESIS Alan Turing

  2. Cost of transitionless driving and work output

    E-Print Network [OSTI]

    Yuanjian Zheng; Steve Campbell; Gabriele De Chiara; Dario Poletti

    2015-09-07

    Unitary processes allow for the transfer of work to and from Hamiltonian systems. However, to achieve non-zero power for the practical extraction of work, these processes must be performed within a finite-time, which inevitably induces excitations in the system. We characterize this by introducing a measure that indicates the need for an external driving to preserve quantum adiabaticity. We show that depending on the time-scale of the process and the physical realization of the external driving employed, the use of transitionless quantum driving (TQD) to extract more work is not always effective. Furthermore, by virtue of the two-time energy measurement definition of quantum work, we also demonstrate that the cost of TQD can be significantly reduced by selecting a restricted form of the driving Hamiltonian that depends on the outcome of the first energy measurement. We apply our analysis to systems ranging from a two-level Landau-Zener problem to a many-body quantum Ising chain.

  3. Working Paper Proceedings Engineering Project Organizations Conference

    E-Print Network [OSTI]

    Blandford, Ann

    Working Paper Proceedings Engineering Project Organizations Conference Rheden, The Netherlands July, UK, f.deng.11@ucl.ac.uk #12;Canada-Benchmarking System (Rankin et al. 2008), Netherlands (Bakens et the performance of projects, can be applied to compare the performance of individual organizations

  4. Faculty of Social Work Strategic Plan

    E-Print Network [OSTI]

    Calgary, University of

    Faculty of Social Work Strategic Plan 2013 ­ 2018 Making a world of difference. #12;As one delighted to present our 2013-2018 Strategic Plan, which maps the foundation for our future. This Strategic Plan aligns closely with the University of Calgary's own Eyes HighTM strategic direction (read more

  5. Second Proof Work, Power, and Energy

    E-Print Network [OSTI]

    Kostic, Milivoje M.

    , where electromechanical energy may be kinetic or potential--and thermal energy represents overall and temperature, thereby avoiding heating and loss of work potential into thermal energy of the reaction products. renewable energy sources The continuously or frequently available (renewed daily or at least annually

  6. NIST STRBase Resources to Aid Work with

    E-Print Network [OSTI]

    .S. Department of Justice. Our group receives or has received funding from the FBI Laboratory and the National;Applied Genetics Additional U.S. Core CODIS Loci Are Coming... http://www.fbi.gov selection Establishes target goals CODIS Core Loci Working Group with FBI Chair and 5 members; Web meetings

  7. Working Papers Series Paper 1 November 2009

    E-Print Network [OSTI]

    1 ITC Working Papers Series Paper 1 ­ November 2009 Reporting on flood risk perception. Academic standards apply for citing and referencing source. #12;2 Reporting on flood risk perception's in bedijkte termen) and MVW (2005) with the report "Flood Risks and Safety in the Netherlands" (Veiligheid

  8. Life and work of James Alexander Haldane 

    E-Print Network [OSTI]

    Wallace, D. E.

    1955-01-01

    at the very outset by a lack of research in this field. The following thesis is a study of the life and work of the one man who, above all others, led the way in establishing evangelism as a legitimate and necessary means of propagating the Gospel in Scotland...

  9. Original Works by the Playwriting Class

    E-Print Network [OSTI]

    Qian, Ning

    recognized the critical importance of giving Columbia MFA playwrights an opportunity to see their works fully, nondescript downtown building. ABOVE: Select Sections (2013), with Anna Dart and Tara Pacheco. Photo by Joe Li.mattminnicino.com Mentor: Jenny Schwartz ABOVE: Birdland (a tragedy) (2014), with Daniel Abraham. Photo by Kelly Stuart

  10. Progress Report on Power Division Work Plan

    E-Print Network [OSTI]

    RPS & impacts on PNW · Analysis of negative wholesale power prices · Wind Integration Forum · Maintain balancing" DR pilot programs · Tracking Smart Grid Demo Project ­ ­ Will include "conventional" and "load/windProgress Report on Power Division Work Plan Power Committee Meeting October 2010 1 #12;The Division

  11. How does Google work? Three aspects

    E-Print Network [OSTI]

    Rydeheard, David

    How does Google work? Three aspects: 1 How does Google know what is on the Web? 2 How does Google search the Web for your query phrase? 3 How does Google decide which results you may be interested in a `page ranking' to help with item (3). #12;How does Google know what is on the Web? Answer is spiders

  12. WORKING IN NORWAY Information about tax

    E-Print Network [OSTI]

    Neshveyev, Sergey

    WORKING IN NORWAY Information about tax 20.8.2015 #12;The tax system in Norway · Basic principal in Norway Approx. 29 % of the Governments income comes from tax that we pay. The tax will be used to pay % - police and army 5 % Average tax on salary is 28 % in Norway. #12;Tax level 2014 2 600 5 740 10 414 34

  13. Cost Codes and the Work Breakdown Structure

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-03-28

    The chapter discusses the purpose of the work breakdown structure (WBS) and code of account (COA) cost code system, shows the purpose and fundamental structure of both the WBS and the cost code system, and explains the interface between the two systems.

  14. INTERNATIONAL CIR Working Paper No. 50

    E-Print Network [OSTI]

    Michelson, David G.

    actors and at different times in peacebuilding processes. In sum, engagement with `the political' should and absence of `the political'? A consideration of the varied role of politics in peacebuilding Jen Peterson UN photo by Stuart Price #12; 1CIR Working Paper No. 50 The role of politics in current modes

  15. Working group on $??$ and $?$N interactions - Summary

    E-Print Network [OSTI]

    Ulf-G. Meißner; Martin Sevior; A. Badertscher; B. Borasoy; P. Büttiker; G. Höhler; M. Knecht; O. Krehl; J. Lowe; M. Mojzis; G. Müller; O. Patarakin; M. Pavan; A. Rusetsky; M. E. Sainio; J. Schacher; G. Smith; S. Steininger; V. Vereshagin

    1997-11-18

    This is the summary of the working group on $\\pi\\pi$ and $\\pi$N interactions of the Chiral Dynamics Workshop in Mainz, September 1-5, 1997. Each talk is represented by an extended one page abstract. Some additional remarks by the convenors are added

  16. DONALD BURKHOLDER'S WORK IN MARTINGALES AND ...

    E-Print Network [OSTI]

    2010-12-21

    Dec 21, 2010 ... And martingales, which can be defined in terms of fair games, lie ... The work of Burkholder and Gundy on martingales in the late sixties and ... parts of this subject. .... knowledge, is a slight alteration of the proof in [56], as it uses .... Fredricks, and Lewy in 1928 [70] used ideas related to martingale ideas,.

  17. PETER DAVID JOHNSON Home Address: Work Address

    E-Print Network [OSTI]

    Johnson, Peter D.

    for the Advancement of Science 2009 Outstanding Referee, Journals of the American Physical Society 2011 APS Oliver E1 PETER DAVID JOHNSON Home Address: Work Address: 4 Terrell Lane CMPMSD Stony Brook Physics 510B NY 11790 Brookhaven National Laboratory USA Upton NY 11973 Education 1972 B.Sc. Physics, Imperial College

  18. Project Profile: Chemically Reactive Working Fluids

    Broader source: Energy.gov [DOE]

    Argonne National Laboratory (ANL), under the 2012 SunShot Concentrating Solar Power (CSP) R&D funding opportunity announcement (FOA), is working to identify and test new heat-transfer fluids (HTFs) that store energy chemically for more efficient energy transfer in CSP applications.

  19. Working on the moon: The Apollo experience

    SciTech Connect (OSTI)

    Jones, E.M.

    1989-01-01

    The successful completion of any scientific or engineering project on the Moon will depend, in part, on human ability to do useful work under lunar conditions. In making informed decisions about such things as the use of humans rather than robots for specific tasks, the scheduling of valuable human time, and the design and selection of equipment and tools, good use can be made of the existing experience base. During the six completed landing missions, Apollo lunar surface crews conducted 160 astronaut-hours of extra-vehicular activities (EVAs) and also spent a similar sum of waking hours working in the cramped confines of the Lunar Module. The first three missions were primarily proof-tests of flight hardware and procedures. The ability to land equipment and consumables was very modest but, despite stay times of no more than 32 hours, the crews of Apollos 11, 12, and 14 were able to test their mobility and their capability of doing useful work outside the spacecraft. For the last three missions, thanks to LM modifications which enabled landings with significant amounts of cargo, stay times more than doubled to three days. The crews were able to use Lunar Rovers to conduct extensive local exploration and to travel up to 10 kilometers away from their immediate landing sites. During these final missions, the astronauts spent enough time doing work of sufficient complexity that their experience should be of use in the formulation early-stage lunar base operating plans. 2 refs.

  20. Introduction Member Benefits Program of Work

    E-Print Network [OSTI]

    Linhardt, Robert J.

    that much of the early conservation measures have been implemented, LEA will work to identify effective new ways to save energy, quantify the savings, and support its members in implementation. LEA invites utilities, efficiency agencies, and ESCOs to join its efforts. The membership cost for the LEA is: · $30

  1. Climate Summary Working toward Climate Resilience

    E-Print Network [OSTI]

    Walter, M.Todd

    1 Climate Summary Working toward Climate Resilience A Summary Prepared for the Town of Germantown and decision-making as requested by the Town of Germantown. It identifies historic climate trends and introduces future projections and strategies to address the climate hazards most likely to affect Hudson

  2. Opto Working Group Meeting March 21, 2014

    E-Print Network [OSTI]

    Gan, K. K.

    Summary of failures after burn-in/thermal cycles Summary K.K. Gan #12;K.K. Gan Opto Working Group Implemented several improvements based on experience gained from production of 1st generation opto cold solder is a major cause of opto-link failures opto-boards built by OSU have ~0.1% broken

  3. Working Paper #15 Louisiana Forest Products Laboratory

    E-Print Network [OSTI]

    industries which seek to reduce manufacturing costs with low skill, low paying repetitive jobs. Low skill areas will become more difficult to find. Further, with the work place #12;4 becoming more technology dependent, the labor force must become more capable of assimilating new technology and more proficient

  4. California Energy Futures Study Working Committee

    E-Print Network [OSTI]

    California at Davis, University of

    #12;#12;#12;California Energy Futures Study Working Committee Robert Budnitz, LBNL Linda Cohen, UC Somerville, UC Berkeley H. Youngs ­ EBI, UC Berkeley California's Energy Future, Biofuels #12;Stress tests California's Energy Future, Biofuels #12;#12;#12;Reduced Fuel Demand Scenario H. Youngs ­ EBI, UC Berkeley

  5. Strategic Partnership Projects [Formerly Known as Work for Others (Non-Department of Energy Funded Work)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2005-01-24

    Strategic Partnership Projects is work performed for non-DOE entities by DOE/(NNSA personnel and/or their respective contractor personnel or the use of DOE/NNSA facilities for work that is not directly funded by DOE/NNSA appropriations. This Admin Chg address primarily address references to revised directives and the results of departmental reorganization. In addition, the Secretary directed effective immediately work formerly known as Work for Others (WFO) to be renamed Strategic Partnership Projects (SPPs). Admin Chg 2, dated 3-9-15, supersedes DOE O 481.1C Admin Chg 1, dated 3-14-11.

  6. B Plant Complex preclosure work plan

    SciTech Connect (OSTI)

    ADLER, J.G.

    1999-02-02

    This preclosure work plan describes the condition of the dangerous waste treatment storage, and/or disposal (TSD) unit after completion of the B Plant Complex decommissioning Transition Phase preclosure activities. This description includes waste characteristics, waste types, locations, and associated hazards. The goal to be met by the Transition Phase preclosure activities is to place the TSD unit into a safe and environmentally secure condition for the long-term Surveillance and Maintenance (S&M) Phase of the facility decommissioning process. This preclosure work plan has been prepared in accordance with Section 8.0 of the Hanford Federal Facility Agreement and Consent Order (Tri-Party Agreement) (Ecology et al. 1996). The preclosure work plan is one of three critical Transition Phase documents, the other two being: B Plant End Points Document (WHC-SD-WM-TPP-054) and B Plant S&M plan. These documents are prepared by the U.S. Department of Energy, Richland Operations Office (DOE-RL) and its contractors with the involvement of Washington State Department of Ecology (Ecology). The tanks and vessels addressed by this preclosure work plan are limited to those tanks end vessels included on the B Plant Complex Part A, Form 3, Permit Application (DOE/RL-88-21). The criteria for determining which tanks or vessels are in the Part A, Form 3, are discussed in the following. The closure plan for the TSD unit will not be prepared until the Disposition Phase of the facility decommissioning process is initiated, which follows the long-term S&M Phase. Final closure will occur during the Disposition Phase of the facility decommissioning process. The Waste Encapsulation Storage Facility (WESF) is excluded from the scope of this preclosure work plan.

  7. EFCOG Work Management Sub-Working Group Session on Overview and Results from WP&C Assist Visits across Complex

    Broader source: Energy.gov [DOE]

    Slide Presentation by Donna J. Governor, EFCOG Work Management Subgroup Chair. EFCOG Work Management Subgroup--Introduction and Overview.

  8. Concurrent Secure Computation with Optimal Query Complexity

    E-Print Network [OSTI]

    International Association for Cryptologic Research (IACR)

    and design concurrently secure protocols kicked into gear with early works such as [GK96, DDN00a], Boston

  9. Housekeeping category corrective action unit work plan

    SciTech Connect (OSTI)

    1996-08-01

    The purpose of this Corrective Action Unit (CAU) Work Plan is to provide a strategy to be used by the US Department of Energy Nevada Operations Office (DOE/NV), the US Department of Defense (DoD) Defense Special Weapons Agency (DSWA) (formerly the Defense Nuclear Agency), and contractor personnel for conducting corrective actions at the Nevada Test Site (NTS) and Nevada off-site locations including the Tonopah Test Range (TTR), the Project Shoal Area, and the Central Nevada Test Area. This Work Plan applies to housekeeping category CAUs already listed in the Federal Facility Agreement and Consent Order (FFACO) Appendices (FFACO, 1996) as well as newly identified Corrective Action Sites (CASs) that will follow the housekeeping process.

  10. Infrared photoemitting diode having reduced work function

    DOE Patents [OSTI]

    Hirschfeld, T.B.

    1982-05-06

    In electro-optical detectors which include as elements a photoemitting photocathode and anode, a photoemitting diode is fabricated which lowers the diode's work function, thus reducing the cooling requirement typically needed for this type of device. The work function is reduced by sandwiching between the photocathode and anode a liquid meidum of the formula NR/sub 3/ and having an electron affinity for the electrons of the photocathode, which liquid medium permits free electrons leaving the photocathode to remain as stable solvated species in the liquid medium. Thus, highly light-absorbent, and therefore thin, metallic layers can be used for detection, thereby reducing dark current at a given temperature, with a consequent reduction in cooling requirements at constant detector performance.

  11. Healthy Housing Opportunities During Weatherization Work

    SciTech Connect (OSTI)

    Wilson, J.; Tohn, E.

    2011-03-01

    In the summer and early fall of 2010, the National Center for Healthy Housing interviewed people from a selection of state and local agencies that perform weatherizations on low-income housing in order to gauge their approach to improving the health and safety of the homes. The interviews provided a strong cross section of what work agencies can do, and how they go about funding this work when funds from the Weatherization Assistance Program (WAP) do not cover the full extent of the repairs. The report also makes recommendations for WAP in how to assist agencies to streamline and maximize the health and safety repairs they are able to make in the course of a standard weatherization.

  12. Meeting Summary, Credit Trading Work Group

    SciTech Connect (OSTI)

    Kevin Bryan

    2000-12-07

    OAK-B135 Credit Trading Work Group Meeting Summary. The purpose of the meeting is to: (1) Provide an opportunity for NWCC Work Group Members, NWCC Members, and invited expert participants to hear an overview of the draft NWCC Credit Trading Report and to critically review and discuss the report's recommendations and principles. (2) Hear presentations from several perspectives of other experts on credit trading which provide: (a) a brief summary of credit trading activities they are involved in, and (b) critical responses to the NWCC draft report. (3) Identify how the report can be improved at the big picture level. Attempt to resolve issues or concerns if necessary. (4) Discuss the recommendations and credit trading principles in detail and attempt to reach consensus on these sections for presentation to the NWCC. (5) Discuss if any of the outreach and communication recommendations in the report should be conducted by the NWCC.

  13. Clean Energy Works Oregon Final Technical Report

    SciTech Connect (OSTI)

    Jacob, Andria; Cyr, Shirley

    2013-12-31

    In April 2010, the City of Portland received a $20 million award from the U.S. Department of Energy, as part of the Energy Efficiency and Conservation Block Grant program. This award was appropriated under the American Recovery and Reinvestment Act (ARRA), passed by President Obama in 2009. DOE’s program became known as the Better Buildings Neighborhood Program (BBNP). The BBNP grant objectives directed the City of Portland Bureau of Planning and Sustainability (BPS) as the primary grantee to expand the BPS-led pilot program, Clean Energy Works Portland, into Clean Energy Works Oregon (CEWO), with the mission to deliver thousands of home energy retrofits, create jobs, save energy and reduce carbon dioxide emissions.The Final Technical Report explores the successes and lessons learned from the first 3 years of program implementation.

  14. Long working distance incoherent interference microscope

    DOE Patents [OSTI]

    Sinclair, Michael B. (Albuquerque, NM); De Boer, Maarten P. (Albuquerque, NM)

    2006-04-25

    A full-field imaging, long working distance, incoherent interference microscope suitable for three-dimensional imaging and metrology of MEMS devices and test structures on a standard microelectronics probe station. A long working distance greater than 10 mm allows standard probes or probe cards to be used. This enables nanometer-scale 3-dimensional height profiles of MEMS test structures to be acquired across an entire wafer while being actively probed, and, optionally, through a transparent window. An optically identical pair of sample and reference arm objectives is not required, which reduces the overall system cost, and also the cost and time required to change sample magnifications. Using a LED source, high magnification (e.g., 50.times.) can be obtained having excellent image quality, straight fringes, and high fringe contrast.

  15. The life and work of Leonard Doughty 

    E-Print Network [OSTI]

    Grant, Lyman Winstead

    1979-01-01

    . Although Doughty lived in Texas, he was a reader of Oscar Wilde, Ernest Dowson, and other English pessimis- tic poets. Under their influence Doughty wrote many passionate sonnets, rondels, and short lyrics which highly romanticized death, failed love... no references to Doughty or his work published after his death. Although Doughty does not deserve this anonymity, there are several reasons why he is unknown. In spite of the little recognition he received, Doughty seemed determined not to please those people...

  16. Nepal's Peace Agreement: Making it Work

    E-Print Network [OSTI]

    International Crisis Group

    2006-12-15

    delivered a measurably increased sense of security to ordinary people but did not transform daily life in other areas.15 Poorly thought out moves – such as a significant hike in petroleum product prices sprung on a volatile public in August – prompted... by Indonesia). 18 Donors sent a delegation of ambassadors to urge the prime minister to make appointments to the National Human Rights Commission, National Women’s Commission and Dalit Commission and other such agencies, saying their work had in effect...

  17. Cesium legacy safety project management work plan

    SciTech Connect (OSTI)

    Durham, J.S.

    1998-04-21

    This Management Work Plan (MWP) describes the process flow, quality assurance controls, and the Environment, Safety, and Health requirements of the Cesium Legacy Safety Project. This MWP provides an overview of the project goals and methods for repackaging the non-conforming Type W overpacks and packaging the CsCl powder and pellets. This MWP is not intended to apply to other activities associated with the CsCl Legacy Safety Program (i.e., clean out of South Cell).

  18. Cold worked ferritic alloys and components

    DOE Patents [OSTI]

    Korenko, Michael K. (Wexford, PA)

    1984-01-01

    This invention relates to liquid metal fast breeder reactor and steam generator precipitation hardening fully ferritic alloy components which have a microstructure substantially free of the primary precipitation hardening phase while having cells or arrays of dislocations of varying population densities. It also relates to the process by which these components are produced, which entails solution treating the alloy followed by a final cold working step. In this condition, the first significant precipitation hardening of the component occurs during high temperature use.

  19. TRUTeamWorks 06-24-04

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking With LivermoreSustainableDEPARTMENT OFEnergy-

  20. Working Fluids: Low Global Warming Potential Refrigerants

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematics And Statistics » USAJobs SearchAMERICA'SEnergy Safely Tear Down Towers| Department ofWorking

  1. How Microgrids Work | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuelsof Energy ServicesContracting OversightEMSHomeMicrogrids Work How Microgrids

  2. Spent Fuel Working Group Report. Volume 1

    SciTech Connect (OSTI)

    O`Toole, T.

    1993-11-01

    The Department of Energy is storing large amounts of spent nuclear fuel and other reactor irradiated nuclear materials (herein referred to as RINM). In the past, the Department reprocessed RINM to recover plutonium, tritium, and other isotopes. However, the Department has ceased or is phasing out reprocessing operations. As a consequence, Department facilities designed, constructed, and operated to store RINM for relatively short periods of time now store RINM, pending decisions on the disposition of these materials. The extended use of the facilities, combined with their known degradation and that of their stored materials, has led to uncertainties about safety. To ensure that extended storage is safe (i.e., that protection exists for workers, the public, and the environment), the conditions of these storage facilities had to be assessed. The compelling need for such an assessment led to the Secretary`s initiative on spent fuel, which is the subject of this report. This report comprises three volumes: Volume I; Summary Results of the Spent Fuel Working Group Evaluation; Volume II, Working Group Assessment Team Reports and Protocol; Volume III; Operating Contractor Site Team Reports. This volume presents the overall results of the Working Group`s Evaluation. The group assessed 66 facilities spread across 11 sites. It identified: (1) facilities that should be considered for priority attention. (2) programmatic issues to be considered in decision making about interim storage plans and (3) specific vulnerabilities for some of these facilities.

  3. MARINE MAMMAL STRANDING REPORT -LEVEL A DATA FIELD #: __________________________ NMFS REGIONAL #: _____________________________ NATIONAL DATABASE#: __________________________________

    E-Print Network [OSTI]

    : _____________________________________________________________________________________ Gear Collected? YES NO Gear Disposition: _____________________________________________________ Other

  4. Wind Works LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page| Open Energy Information Serbia-EnhancingEtGeorgia:Illinois: Energy ResourcesTurboPower IncHomesWindWindWind Works LLC

  5. Summary of the impedance working group

    SciTech Connect (OSTI)

    Chao, A.W.

    1995-05-01

    The impedance working group concentrated on the LHC design during the workshop. They look at the impedance contributions of liner, beam position monitors, shielded bellows, experimental chambers, superconducting cavities, recombination chambers, space charge, kickers, and the resistive wall. The group concluded that the impedance budgeting and the conceptual designs of the vacuum chamber components looked basically sound. It also noted, not surprisingly, that a large amount of studies are to be carried out further, and it ventured to give a partial list of these studies.

  6. REBUILD AMERICA PROGRAM SCOPE OF WORK

    SciTech Connect (OSTI)

    Jeffrey Brown; Bruce Exstrum

    2004-12-01

    This report summarizes the activities carried out by Aspen Systems Corporation in support of the Department of Energy's Rebuild America program during the period from October 9, 1999 to October 31, 2004. These activities were in accordance with the Scope of Work contained in a GSA MOBIS schedule task order issued by the National Energy Technology Laboratory. This report includes descriptions of activities and results in the following areas: deployment/delivery model; program and project results; program representative support activities; technical assistance; web site development and operation; business/strategic partners; and training/workshop activities. The report includes conclusions and recommendations. Five source documents are also provided as appendices.

  7. James Hannay: His Life and Works

    E-Print Network [OSTI]

    Worth, George J.

    1964-01-01

    of warfare undreamed of by its earlier European attackers, men like Baldwin, Guy de Lusignan, and Richard Coeur de Lion. "It was the work of centuries condens ed into an afternoon—the spectacle of ruins made in an hour. The poor Egyptians met death... name and reputation worth redeeming from the obscurity into which they have fallen. Soon after his death in 1873, two of James Hannay's friends, Annie Thomas Cudlip and Dr. James Steele, projected biogra phies, neither of which, unfortunately, came...

  8. Going To Work: Keeping Your Job 

    E-Print Network [OSTI]

    Hoffman, Rosemarie

    2000-07-20

    feelings under con - trol. All of us lose our patience occa- sionally, but it?s important to stay in control. Don?t become nervous, cry, lose your temper or hit someone or something. Answer these questions to see what you have learned about keeping a job: 1.... Roger works at a clothing store, and he hates to take inventory. H e almost never finishes inventory on time. When he?s involved in invento- ry, he takes out his frustration on the customers and loses his patience easily. What can Roger do to be a bet...

  9. Sustainable Energy Works LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page| Open Energy Information Serbia-Enhancing CapacityVectren)Model forTechnologies Ltd Jump to: navigation, searchWorks

  10. Working Capital for Contractors | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal Gas &SCE-Sessions |discussed how saving energy5 Worker Righs, Issue 2 Working Capital for

  11. Working With Municipal Utilities | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal Gas &SCE-Sessions |discussed how saving energy5 Worker Righs, Issue 2 WorkingEarth

  12. EnerWorks Inc | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTIONRobertsdale, AlabamaETEC GmbH JumpEllenville, New York:CorporationEnerGeneticsEnerVaultEnerWorks Inc

  13. SpringWorks | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page| Open Energy Information Serbia-Enhancing CapacityVectren) Jump to:Spill Prevention andWellSpringWorks Jump to:

  14. Working with Modules within Perl and Python

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservationBio-Inspired SolarAbout /Two0Photos andSeminarsDesignIn theWorking with Modules

  15. Working with SRNL - Our Facilities - ACTL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservationBio-Inspired SolarAbout /Two0Photos andSeminarsDesignIn theWorking with Aiken County

  16. Working with SRNL - Our Facilities - Analytical Laboratories

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservationBio-Inspired SolarAbout /Two0Photos andSeminarsDesignIn theWorking with Aiken

  17. Working with SRNL - Our Facilities - EMRL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservationBio-Inspired SolarAbout /Two0Photos andSeminarsDesignIn theWorking with AikenEnergy

  18. Working with SRNL - Our Facilities - HTRL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservationBio-Inspired SolarAbout /Two0Photos andSeminarsDesignIn theWorking withHydrogen

  19. Working with SRNL - Our Facilities - Main Campus

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservationBio-Inspired SolarAbout /Two0Photos andSeminarsDesignIn theWorking SRNL Home SRNL

  20. Working with SRNL - Technology Transfer - Contacts

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservationBio-Inspired SolarAbout /Two0Photos andSeminarsDesignIn theWorking SRNL8/17/2015

  1. Working with SRNL - Technology Transfer - Ombudsman

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservationBio-Inspired SolarAbout /Two0Photos andSeminarsDesignIn theWorking

  2. NREL: Electricity Integration Research - Working With Us

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass map shines light on771/6/14 Contact:NewsWebmasterWorking With Us NREL offers industry,

  3. Contact Us - Working With Us | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room News PublicationsAuditsClusterInformation AdministrationContact Us - Working With Us Contact us

  4. Who Works for NIF & PS?

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfateSciTechtail.Theory ofDidDevelopmentatabout Who Works for NIF & PS? The National Ignition

  5. Working with CMI: Affiliates | Critical Materials Institute

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfateSciTechtail.Theory ofDidDevelopmentatabout Who Works for NIF & PS?at NNSA |

  6. Working with CMI: Associates | Critical Materials Institute

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfateSciTechtail.Theory ofDidDevelopmentatabout Who Works for NIF & PS?at NNSA |Associates CMI

  7. Working with CMI: Team | Critical Materials Institute

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfateSciTechtail.Theory ofDidDevelopmentatabout Who Works for NIF & PS?at NNSA |Associates

  8. Working with SRNL - Technology Transfer - Tech Briefs

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfateSciTechtail.Theory ofDidDevelopmentatabout Who Works for NIF & PS?at NNSA

  9. NREL: Geothermal Technologies - Working with Us

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass map shines light on771/6/14RecentGeospatialReliabilityWorking with Us NREL offers

  10. NREL: Measurements and Characterization - Working with Us

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass map shines lightGeospatial Toolkit The GeospatialSolarWorking with Us The National

  11. NREL: Research Facilities - Working with Us

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass map shines lightGeospatial ToolkitSMARTS - Simple Model of theWindLaboratoriesWorking

  12. NREL: Transmission Grid Integration - Working With Us

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass map shines lightGeospatial ToolkitSMARTSWorking With Us NREL works with industry,

  13. Working and Net Available Shell Storage Capacity

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming963 1.969 1.979Coal Consumers inYear Full report3 Table613)Working and

  14. Working and Net Available Shell Storage Capacity

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming963 1.969 1.979Coal Consumers inYear Full report3 Table613)Working

  15. Working and Net Available Shell Storage Capacity

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming963 1.969 1.979Coal Consumers inYear Full report3 Table613)WorkingNet

  16. Working and Net Available Shell Storage Capacity

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming963 1.969 1.979Coal Consumers inYear Full report3 Table613)WorkingNetNet

  17. Prague Public Works Authority | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoop Inc Jump to:Newberg,Energy LLC JumpPhonoSolar and Wind JumpPowercomPublic Works

  18. TRU TeamWorks - August 14, 2003

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking With LivermoreSustainableDEPARTMENT OFEnergy- EnergyTri-State,2 WIPP9,

  19. TRUTeamWorks 05-13-04

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking With LivermoreSustainableDEPARTMENT OFEnergy- EnergyTri-State,27,

  20. TRUTeamWorks 06-10-2004

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking With LivermoreSustainableDEPARTMENT OFEnergy- EnergyTri-State,27,10,