Sample records for fluid fl oz

  1. ServingSize(oz) CaloriesFromFat

    E-Print Network [OSTI]

    Finzi, Adrien

    / 1 pc 32 2 0 0 0 0 8 7 0 3 1 BEVERAGES* Pepsi® (Sm.) 22 oz 240 0 0 0 0 0 60 67 0 65 0 Pepsi® (Med.) 30 oz 330 0 0 0 0 0 80 92 0 89 0 Pepsi® (Lrg.) 42 oz 460 0 0 0 0 0 115 129 0 124 0 Diet Pepsi® (Sm.) 22 oz 0 0 0 0 0 0 60 0 0 0 0 Diet Pepsi® (Med.) 30 oz 0 0 0 0 0 0 80 0 0 0 0 (Spicy) Entree

  2. DATA TRANSMISSION OPTIONS FOR VMT DATA AND FEE COLLECTION CENTERS

    E-Print Network [OSTI]

    Bertini, Robert L.

    , VMT fee, data processing, fuel tax alternatives, fee collection center, customer service center 18.59 kilometers squared km2 VOLUME VOLUME mL milliliters 0.034 fluid ounces fl oz fl oz fluid ounces 29

  3. A study of ZnxZryOz mixed oxides for direct conversion of ethanol...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    study of ZnxZryOz mixed oxides for direct conversion of ethanol to isobutene. A study of ZnxZryOz mixed oxides for direct conversion of ethanol to isobutene. Abstract: ZnxZryOz...

  4. An Overview of the Design of Distributed Oz Seif Haridi

    E-Print Network [OSTI]

    Haridi, Seif

    An Overview of the Design of Distributed Oz Seif Haridi Swedish Institute of Computer Science (SICS a design for a distributed programming sys­ tem, Distributed Oz, that abstracts away the network. While retaining their cen­ tralized semantics, they are extended with a distributed se­ mantics

  5. Espresso 12oz: $1.40 16oz: $2.80 20oz: $3.92 Freshly ground, Fair Trade and Organic, beans compacted and poured through our machine

    E-Print Network [OSTI]

    Northern British Columbia, University of

    , beans compacted and poured through our machine Americano 12oz: $1.40 16oz: $2.80 20oz: $3.92 Hot water in a quarter of a cup of water mixed with steam milk and a flavour shot of your choice Steamed Milk - 12oz: $1 Coffee Beans put through our commercial grade brewer to produce the best on-campus cup of coffee All

  6. Direct Conversion of Bio-ethanol to Isobutene on Nanosized ZnxZryOz...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Conversion of Bio-ethanol to Isobutene on Nanosized ZnxZryOz Mixed Oxides with Balanced Acid–Base Sites. Direct Conversion of Bio-ethanol to Isobutene on Nanosized ZnxZryOz...

  7. Simulations of the OzDES AGN Reverberation Mapping Project

    E-Print Network [OSTI]

    King, Anthea L; Davis, Tamara M; Denney, K D; Kochanek, C S; Peterson, Bradley M; Skielboe, Andreas; Vestergaard, Marianne; Huff, Eric; Watson, Darach; Banerji, Manda; McMahon, Richard; Sharp, Rob; Lidman, C

    2015-01-01T23:59:59.000Z

    As part of the OzDES spectroscopic survey we are carrying out a large scale reverberation mapping study of $\\sim$500 quasars over five years in the 30 deg$^2$ area of the Dark Energy Survey (DES) supernova fields. These quasars have redshifts ranging up to 4 and have apparent AB magnitudes between $16.8OzDES reverberation mapping campaign and its possible extensions. We expect to recover lags for $\\sim$35-45\\% of the quasars. AGN with shorter lags and greater variability are more likely to yield a lag, and objects with lags $\\lesssim$6 month or $\\sim$1 year are expected be recovered the most accurately. The baseline OzDES reverberation mapping campaign is predicted to produce an ...

  8. On Eling-Oz formula for the holographic bulk viscosity

    E-Print Network [OSTI]

    Alex Buchel

    2011-05-09T23:59:59.000Z

    Recently Eling and Oz [1] proposed a simple formula for the bulk viscosity of holographic plasma. They argued that the formula is valid in the high temperature (near-conformal) regime, but is expected to break down at low temperatures. We point out that the formula is in perfect agreement with the previous computations of the bulk viscosity of the cascading plasma [2,3], as well as with the previous computations of the bulk viscosity of N=2^* plasma [4,5]. In the latter case it correctly reproduces the critical behaviour of the bulk viscosity in the vicinity of the critical point with the vanishing speed of sound.

  9. Stochastic dynamic systems fl T. Soderstrom, 1997

    E-Print Network [OSTI]

    Flener, Pierre

    Stochastic dynamic systems Chapter 5 c fl T. S¨oderstr¨om, 1997 1 Optimal estimation ffl The conditional mean ffl Best linear estimate ffl ML estimation c fl T. S¨oderstr¨om, 1997 2 Optimal estimation criterion 2. Symmetric cond pdf c fl T. S¨oderstr¨om, 1997 3 Best linear estimate Given Ex = mx ; Ey = my E

  10. Alcohol and your health Research-based information from the

    E-Print Network [OSTI]

    Bandettini, Peter A.

    oz of regular beer about 5% alcohol = 8­9 fl oz of malt liquor (shown in a 12 oz glass) about 7-proof spirits or "hard liquor" 12 fl oz = 1 12 fl oz = 1˝ 750 ml (a regular a shot (1.5 oz glass/50 ml bottle) = 1 16 fl oz = 1 16 fl oz = 2 wine bottle) = 5 a mixed drink or cocktail = 1 or more 22 fl oz = 2

  11. Stochastic dynamic systems fl T. Soderstrom, 1997

    E-Print Network [OSTI]

    Flener, Pierre

    Stochastic dynamic systems Chapter 2 c fl T. S¨oderstr¨om, 1997 1 Some probability theory ffl Basic facts ffl Conditional distributions ffl Complex­valued Gaussian variables c fl T. S¨oderstr¨om, 1997 2) increasing ffl limx!1 F(x) = 1 ffl lim x!\\Gamma1 F (x) = 0 c fl T. S¨oderstr¨om, 1997 3 Random variables

  12. Exploring Interruption in HRI using Wizard of Oz Paul Saulnier, Ehud Sharlin, Saul Greenberg

    E-Print Network [OSTI]

    Greenberg, Saul

    experiments and should call for future research of interruption in human-robot interaction. II. DESCRIPTION of Oz (WoO) should interrupt humans in various social settings. While there is considerable work social HRI experiments as well as reflections on our future interruption HRI research Keywords

  13. An Oz-Centric Review of Interactive Drama and Believable Agents

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    Authoring Oh, what a tangled web we weave... Related research areas Artificial life Humanoids Embodied.cmu.edu/afs/cs/project/oz/web/papers/CMU-CS-97-156.html #12;This report provides an overview this report can be found on the web; the annotated bibliography provides links to these web resources

  14. Stochastic dynamic systems fl T. Soderstrom, 1997

    E-Print Network [OSTI]

    Flener, Pierre

    Stochastic dynamic systems Chapter 10 c fl T. S¨oderstr¨om, 1997 1 Optimal stochastic control ffl controllers c fl T. S¨oderstr¨om, 1997 2 Optimal stochastic control ­ some illustrative examples System x¨oderstr¨om, 1997 3 Optimal stochastic control ­ Deterministic system Criterion J = x 2 (N) = [ax(N \\Gamma 1) + bu

  15. FL47CH15-Goldstein ARI 25 November 2014 9:45 Green Algae as Model

    E-Print Network [OSTI]

    Goldstein, Raymond E.

    FL47CH15-Goldstein ARI 25 November 2014 9:45 Green Algae as Model Organisms for Biological Fluid green algae, spanning from the unicellular Chlamydomonas to multicellular Volvox, have emerged as model of flagellar synchronization. Green algae are well suited to the study of such problems because of their range

  16. The peculiar case of the "double-humped" super-luminous supernova SN2006oz

    E-Print Network [OSTI]

    Rachid Ouyed; Denis Leahy

    2012-02-11T23:59:59.000Z

    SN2006oz is a super-luminous supernova with a mysterious bright precursor that has resisted explanation in standard models. However, such a precursor has been predicted in the dual-shock quark nova (dsQN) model of super-luminous supernovae -- the precursor is the SN event while the main light curve of the SLSN is powered by the Quark-Nova (QN; explosive transition of the neutron star to a quark star). As the SN is fading, the QN re-energizes the SN ejecta, producing a "double-humped" light curve. In this paper, we show the dsQN model successfully reproduces the observed light curve of SN2006oz.

  17. Machines vs Malaria: a flow-based preparation of the drug candidate OZ439

    E-Print Network [OSTI]

    Lau, Shing-Hing; Galván, Alicia; Merchant, Rohan R.; Battilocchio, Claudio; Souto, José A.; Berry, Malcolm B.; Ley, Steven V.

    2015-06-16T23:59:59.000Z

    -up, there- by making this an attractive approach. By integrating new technologies with traditional batch methods we aimed to over- come some of the synthesis issues associated with the prepara- tion of OZ439. This could in principle pave the way for low... conditions, a solution of 7 in EtOH/H2O (1:1 v/v, 0.05 M) was passed through a packed bed reactor (3 mL internal volume) containing the heterogeneous catalyst (Pd/C, 20 mol %) at 1.00 mL min -1 , feeding the reac- tor with 0.1 L min -1 of H2, whilst...

  18. FUPWG Meeting Agenda - Destin, FL | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Destin, FL FUPWG Meeting Agenda - Destin, FL Going coastal for energy efficiency. FUPWG. April 15-16, 2008, Destin, Florida Gulf Power: A Southern Company FEMP logo April 15-16,...

  19. ARIZONA STATE UNIVERSITY STETSON UNIVERSITY Phoenix, AZ Deland, FL

    E-Print Network [OSTI]

    Wu, Shin-Tson

    English Literature English BOWLING GREEN STATE UNIVERSITY Bowling Green, OH SYRACUSE UNIVERSITY IndustrialARIZONA STATE UNIVERSITY STETSON UNIVERSITY Phoenix, AZ Deland, FL Interdisciplinary Studies Leadership FLORIDA STATE UNIVERSITY Instructional Systems Design Tallahassee, FL Interdisciplinary Studies

  20. Stochastic dynamic systems fl T. Soderstrom, 1997

    E-Print Network [OSTI]

    Flener, Pierre

    Stochastic dynamic systems Chapter 9 c fl T. S¨oderstr¨om, 1997 1 Nonlinear filtering ffl Extended(t)H(t)P(tjt \\Gamma 1) â?? x(t + 1jt) = f(t; â?? x(tjt)) F(t) = @f(t;x) @x fi fi fi x=â??x(tjt) G(t) = g(t; x)j x=â??x(tjt) P

  1. OzDES multi-fibre spectroscopy for the Dark Energy Survey: first-year operation and results

    E-Print Network [OSTI]

    Yuan, Fang; Davis, T M; Childress, M; Abdalla, F B; Banerji, M; Buckley-Geer, E; Rosell, A Carnero; Carollo, D; Castander, F J; D'Andrea, C B; Diehl, H T; Cunha, C E; Foley, R J; Frieman, J; Glazebrook, K; Gschwend, J; Hinton, S; Jouvel, S; Kessler, R; Kim, A G; King, A L; Kuehn, K; Kuhlmann, S; Lewis, G F; Lin, H; Martini, P; McMahon, R G; Mould, J; Nichol, R C; Norris, R P; O'Neill, C R; Ostrovski, F; Papadopoulos, A; Parkinson, D; Reed, S; Romer, A K; Rooney, P J; Rozo, E; Rykoff, E S; Sako, M; Scalzo, R; Schmidt, B P; Scolnic, D; Seymour, N; Sharp, R; Sobreira, F; Sullivan, M; Thomas, R C; Tucker, D; Uddin, S A; Wechsler, R H; Wester, W; Wilcox, H; Zhang, B; Abbott, T; Allam, S; Bauer, A H; Benoit-Levy, A; Bertin, E; Brooks, D; Burke, D L; Kind, M Carrasco; Covarrubias, R; Crocce, M; da Costa, L N; DePoy, D L; Desai, S; Doel, P; Eifler, T F; Evrard, A E; Neto, A Fausti; Flaugher, B; Fosalba, P; Gaztanaga, E; Gerdes, D; Gruen, D; Gruendl, R A; Honscheid, K; James, D; Kuropatkin, N; Lahav, O; Li, T S; Maia, M A G; Makler, M; Marshall, J; Miller, C J; Miquel, R; Ogando, R; Plazas, A A; Roodman, A; Sanchez, E; Scarpine, V; Schubnell, M; Sevilla-Noarbe, I; Smith, R C; Soares-Santos, M; Suchyta, E; Swanson, M E C; Tarle, G; Thaler, J; Walker, A R

    2015-01-01T23:59:59.000Z

    OzDES is a five-year, 100-night, spectroscopic survey on the Anglo-Australian Telescope, whose primary aim is to measure redshifts of approximately 2,500 Type Ia supernovae host galaxies over the redshift range 0.1 Energy Survey for which we are also targeting cluster galaxies, radio galaxies, strong lenses, and unidentified transients, as well as measuring luminous red galaxies and emission line galaxies to help calibrate photometric redshifts. Here we present an overview of the OzDES program and our first-year results. Between Dec 2012 and Dec 2013, we observed over 10,000 objects and measured more than 6,000 redshifts. Our strategy of retargeting faint objects across many observing runs has allowed us to measure redshifts for galaxies as faint as m_r=25 mag. We outline ...

  2. Category:Miami, FL | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty EditCalifornia:Power LPInformationCashtonGo Back toFL" The following 16 files

  3. Columnar defect formation in nanorod/Tl2Ba2Ca2Cu3Oz superconducting Peidong Yang and Charles M. Liebera)

    E-Print Network [OSTI]

    Yang, Peidong

    to the realization of large critical current density (Jc) high-temperature superconductor HTS applications.1 Although significant effort has been placed on high-Jc Bi2Sr2Can 1CunOz (n 2,3) and YBa2Cu3Oz wires,2,3 thallium based penetration depth of the protons that enables the creation of columnar defects in completed wires; however

  4. A study of ZnxZryOz mixed oxides for direct conversion of ethanol to isobutene

    SciTech Connect (OSTI)

    Liu, Changjun; Sun, Junming; Smith, Colin; Wang, Yong

    2013-10-02T23:59:59.000Z

    ZnxZryOz mixed oxides were studied for direct conversion of ethanol to isobutene. Reaction conditions (temperature, residence time, ethanol molar fraction, steam to carbon ratio), catalyst composition, and pretreatment conditions were investigated, aiming at high-yield production of isobutene under industrially relevant conditions. An isobutene yield of 79% was achieved with an ethanol molar fraction of 8.3% at 475 °C on fresh Zn1Zr8O17 catalysts. Further durability and regeneration tests revealed that the catalyst exhibited very slow deactivation via coking formation with isobutene yield maintained above 75% for more than 10 h time-on-stream. More importantly, the catalysts activity in terms of isobutene yield can be readily recovered after in situ calcination in air at 550 °C for 2.5 h. XRD, TPO, IR analysis of adsorbed pyridine (IR-Py), and nitrogen sorption have been used to characterize the surface physical/chemical properties to correlate the structure and performance of the catalysts.

  5. 150W.UniversityBlvd. Melbourne,FL32901

    E-Print Network [OSTI]

    Wood, Stephen L.

    150W.UniversityBlvd. Melbourne,FL32901 321-674-8000 NickAbruzzini Junior,Ocean Engineering JanelleBoisvert Junior,Ocean Engineering KatieDobek Junior, Ocean Engineering Anthony Tedeschi Junior,Ocean Engineering

  6. OzDES multi-fibre spectroscopy for the Dark Energy Survey: first-year operation and results

    E-Print Network [OSTI]

    Yuan, Fang; Davis, T M; Childress, M; Abdalla, F B; Banerji, M; Buckley-Geer, E; Rosell, A Carnero; Carollo, D; Castander, F J; D'Andrea, C B; Diehl, H T; Cunha, C E; Foley, R J; Frieman, J; Glazebrook, K; Gschwend, J; Hinton, S; Jouvel, S; Kessler, R; Kim, A G; King, A L; Kuehn, K; Kuhlmann, S; Lewis, G F; Lin, H; Martini, P; McMahon, R G; Mould, J; Nichol, R C; Norris, R P; O'Neill, C R; Ostrovski, F; Papadopoulos, A; Parkinson, D; Reed, S; Romer, A K; Rooney, P J; Rozo, E; Rykoff, E S; Sako, M; Scalzo, R; Schmidt, B P; Scolnic, D; Seymour, N; Sharp, R; Sobreira, F; Sullivan, M; Thomas, R C; Tucker, D; Uddin, S A; Wechsler, R H; Wester, W; Wilcox, H; Zhang, B; Abbott, T; Allam, S; Bauer, A H; Benoit-Levy, A; Bertin, E; Brooks, D; Burke, D L; Kind, M Carrasco; Covarrubias, R; Crocce, M; da Costa, L N; DePoy, D L; Desai, S; Doel, P; Eifler, T F; Evrard, A E; Neto, A Fausti; Flaugher, B; Fosalba, P; Gaztanaga, E; Gerdes, D; Gruen, D; Gruendl, R A; Honscheid, K; James, D; Kuropatkin, N; Lahav, O; Li, T S; Maia, M A G; Makler, M; Marshall, J; Miller, C J; Miquel, R; Ogando, R; Plazas, A A; Roodman, A; Sanchez, E; Scarpine, V; Schubnell, M; Sevilla-Noarbe, I; Smith, R C; Soares-Santos, M; Suchyta, E; Swanson, M E C; Tarle, G; Thaler, J; Walker, A R

    2015-01-01T23:59:59.000Z

    OzDES is a five-year, 100-night, spectroscopic survey on the Anglo-Australian Telescope, whose primary aim is to measure redshifts of approximately 2,500 Type Ia supernovae host galaxies over the redshift range 0.1 < z < 1.2, and derive reverberation-mapped black hole masses for approximately 500 active galactic nuclei and quasars over 0.3 < z < 4.5. This treasure trove of data forms a major part of the spectroscopic follow-up for the Dark Energy Survey for which we are also targeting cluster galaxies, radio galaxies, strong lenses, and unidentified transients, as well as measuring luminous red galaxies and emission line galaxies to help calibrate photometric redshifts. Here we present an overview of the OzDES program and our first-year results. Between Dec 2012 and Dec 2013, we observed over 10,000 objects and measured more than 6,000 redshifts. Our strategy of retargeting faint objects across many observing runs has allowed us to measure redshifts for galaxies as faint as m_r=25 mag. We outline ...

  7. SALT-flSH INPUSTRIES FISHERY LEAFLET 240

    E-Print Network [OSTI]

    SALT-flSH INPUSTRIES FISHERY LEAFLET 240 FISH AND WILDLIFE SERVICE UNITED STATES DEPARTMENT, Albert M. Day, Director #12;THE VENEZUKLAN SALT-FISH INDUSTRIES CONTE^fTS Part II Potential Productive and Craft 29 Development of Unused or Underutilized Species 29 Development of New Areas 35 Salt 35 Studies

  8. CPDD 2011 Annual Meeting June 22, 2011 Hollywood, FL

    E-Print Network [OSTI]

    Murphy, Susan A.

    Improve maternal and infant outcomes Conduct clinical research to generate new knowledge to improve Setting CAP Clinical Outcome ResearchNo CAP Treatment (n=100) (n=46) Clinical measure: Prenatal visits 8 4 CPDD 2011 Annual Meeting June 22, 2011 Hollywood, FL Outline 1. Complexities of the Problem 2. Clinical

  9. Lecture #5: The Language FL October 4, 2007

    E-Print Network [OSTI]

    Gifford, David K.

    ' language, that transforms the FL language back down into expres- sions in FLK. And then we can describe you won't fault me for writing it out again here. A question from the back of the room: Is he saying alpha-substitution, and expressions which are the same up to an alpha transformation of their bound

  10. Wet-Nanotechnology: fl id t NIUnanofluids at NIU

    E-Print Network [OSTI]

    Kostic, Milivoje M.

    .kostic.niu.edu 4 Mechanical Engineering NORTHERN ILLINOIS UNIVERSITY #12;One Step Nanofluid Production ImprovementOne-Step Nanofluid Production Improvement Insulated and vertically-adjustable boat- heater evaporator NIU with i fl id heater evaporatorLaboratoryLaboratory S.S. ChoiChoi J. Hull,J. Hull, and othersand others

  11. International Conference on Multiphase Flow, ICMF 2010, Tampa, FL, May 30 June 4, 2010

    E-Print Network [OSTI]

    Dabiri, John O.

    7th International Conference on Multiphase Flow, ICMF 2010, Tampa, FL, May 30 ­ June 4, 2010 Shock Conference on Multiphase Flow, ICMF 2010, Tampa, FL, May 30 ­ June 4, 2010 Us Shock speed (m s-1 ) x Spatial

  12. S M Stoller Star Center-WWNA Monthly; Largo, FL

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA groupTuba City, Arizona, DisposalFourthN V O 1 8B100B100WWNA Monthly; Largo, FL

  13. Directions from MCO to Hilton University of Florida Starting from: Orlando International Airport MCO, Orlando, FL

    E-Print Network [OSTI]

    Slatton, Clint

    Directions from MCO to Hilton University of Florida Starting from: Orlando International Airport MCO, Orlando, FL Arriving at: Hilton University of Florida (1714 SW 34th St. Gainesville, FL 32607-4138) Distance: 120.4 miles Approximate Travel Time: 2 hours 29 min 1. Exit MCO on AIRPORT BLVD E - go 0.7 mi 2

  14. Proceedings of the US Hydrographic Conference, Tampa, FL, 25-28 Apr 2011 THE PORT OF NORFOLK PROJECT

    E-Print Network [OSTI]

    New Hampshire, University of

    Proceedings of the US Hydrographic Conference, Tampa, FL, 25-28 Apr 2011 1 THE PORT OF NORFOLK;Proceedings of the US Hydrographic Conference, Tampa, FL, 25-28 Apr 2011 2 Background Creating raster

  15. American Statistical Association Announces 2011 Award Recipients Awards ceremony to be held at Joint Statistical Meetings in Miami Beach, FL

    E-Print Network [OSTI]

    Washington at Seattle, University of

    American Statistical Association Announces 2011 Award Recipients Awards ceremony to be held at Joint Statistical Meetings in Miami Beach, FL MIAMI BEACH, FL (PRWEB) AUGUST 1, 2011 ­ The American Statistical Association (ASA), the nation's preeminent professional statistical society, today announced

  16. ASME 2008 Summer Heat transfer Conference August 10-14, 2008, Jacksonville, FL., USA

    E-Print Network [OSTI]

    Bahrami, Majid

    ASME 2008 Summer Heat transfer Conference August 10-14, 2008, Jacksonville, FL., USA HT2008, University of Victoria Victoria, BC , V8W 2Y2, Canada ABSTRACT Accurate information on the temperature eld

  17. ASME Symposium on Modeling and Control Electrohydraulic Systems, Orlando, FL. November, 2000

    E-Print Network [OSTI]

    Li, Perry Y.

    ASME Symposium on Modeling and Control Electrohydraulic Systems, Orlando, FL. November, 2000 1 not present in previous models. The model has been coded in Simulink and experimentally validated. I

  18. Matematik Dnyas>, 2005 K>fl ahit Arf'> tan>ma mutluluuna erdim. ok

    E-Print Network [OSTI]

    Sertöz, Ali Sinan

    ¤in tan>m> akl>mda kal- m>fl. Önemli bir fley söyleyece¤inin ayr>m>nda olan insanlar>n tavr>yla bana do

  19. Student Disability Services 240 O'Leary Library , 61 Wilder Street Fl-2

    E-Print Network [OSTI]

    Massachusetts at Lowell, University of

    Student Disability Services 240 O'Leary Library , 61 Wilder Street Fl-2 Lowell, Massachusetts 01854 Disability Services 240 O'Leary Library, 61 Wilder Street Lowell, MA 01854 Disability@uml.edu Phone: (978

  20. DOE Zero Energy Ready Home Case Study, e2Homes, Winterpark, FL...

    Broader source: Energy.gov (indexed) [DOE]

    Winter Park, FL that scored HERS 57 without PV or HERS -7 with PV. This 4,305 ft2 custom home has autoclaved aerated concrete walls, a sealed attic with R-20 spray foam, and...

  1. Rare Earth ? N = N* fs fGHZ fp nH fl

    E-Print Network [OSTI]

    Walter, Frederick M.

    Rare Earth ? #12;N to date N = N* fs fGHZ fp nH fl ·N* = 4 x 1011 ·fs = 0.2 ·fGHZ = 0.1 ·fp = 0.8 ·nH = 2 ·fl = 1.0 N = 1.3 x 1010 #12;The Goldilocks Effect Earth is "Just Right" Yes, life on Earth has adapted to Earth, but ... Earth has just the right mass to be ·Tectonically-active ·Retain

  2. Fluid juggling

    E-Print Network [OSTI]

    Soto, Enrique

    2013-01-01T23:59:59.000Z

    This fluid dynamics video is an entry for the Gallery of Fluid Motion for the 66th Annual Meeting of the Fluid Dynamics Division of the American Physical Society. We show the curious behaviour of a light ball interacting with a liquid jet. For certain conditions, a ball can be suspended into a slightly inclined liquid jet. We studied this phenomenon using a high speed camera. The visualizations show that the object can be `juggled' for a variety of flow conditions. A simple calculation showed that the ball remains at a stable position due to a Bernoulli-like effect. The phenomenon is very stable and easy to reproduce.

  3. 6. Fluid mechanics: fluid statics; fluid dynamics

    E-Print Network [OSTI]

    Zevenhoven, Ron

    Figure Pressure (a scalar!) is defined as surface force / area, for example pb = Fb / (d·w) = p @ z = z1 Picture: KJ05 Fluid volume h·d·w with density and mass m = h·d·w· z = z1 In engineering forces Fn+ Fs = 0 or - py·h·w + py·h·w = 0 py = 0 Similarly Fw+ Fe= 0 gives px = 0, There are three

  4. Department of Ocean and Mechanical Engineering 777 Glades Road, Boca Raton, FL 33431

    E-Print Network [OSTI]

    Fernandez, Eduardo

    Department of Ocean and Mechanical Engineering 777 Glades Road, Boca Raton, FL 33431 561.297.3430, fax 561.297.3885 SeaTech ­ The Institute for Ocean & Systems Engineering 101 North Beach Road, Dania of Ocean and Mechanical Engineering at Florida Atlantic University is pleased to announce fellowship

  5. Eddy-current interaction with an ideal crack. II. The inverse problem John FL Bowler

    E-Print Network [OSTI]

    Bowler, John R.

    Eddy-current interaction with an ideal crack. II. The inverse problem John FL Bowler The University 1994) Eddy-current inversion is the process whereby the geometry of a flaw in a metal is derived from eddy-current probe impedance measurements. The approach is based on an optimization scheme that seeks

  6. Theory of eddy current inversion Stephen:J. Nortona) and John FL Bowler

    E-Print Network [OSTI]

    Bowler, John R.

    Theory of eddy current inversion Stephen:J. Nortona) and John FL Bowler University of Surrey) The inverse eddy current problem can be described as the task of reconstructing an unknown distribution of electrical conductivity from eddy-current probe impedance measurements recorded as a function of probe

  7. DOE Zero Energy Ready Home Case Study, e2Homes, Winterpark, FL, Custom Homes

    Broader source: Energy.gov [DOE]

    Case study of a DOE Zero Energy Ready Home in Winter Park, FL that scored HERS 57 without PV or HERS -7 with PV. This 4,305 ft2 custom home has autoclaved aerated concrete walls, a sealed attic with R-20 spray foam, and ductless mini-split heat pumps.

  8. St. Petersburg, FL: Vehicle Use of Recycled Natural Gas Derived from Wastewater Biosolids

    Broader source: Energy.gov [DOE]

    Breakout Session 3A—Conversion Technologies III: Energy from Our Waste—Will we Be Rich in Fuel or Knee Deep in Trash by 2025? St. Petersburg, FL: Vehicle Use of Recycled Natural Gas Derived from Wastewater Biosolids William Eleazer, Supervising Engineer, Brown and Caldwell

  9. ANRV400-FL42-05 ARI 9 August 2009 14:52 Slip on Superhydrophobic

    E-Print Network [OSTI]

    Rothstein, Jonathan

    ANRV400-FL42-05 ARI 9 August 2009 14:52 R E V I E W S IN A D V A N CE Slip on Superhydrophobic, simulations, and theory of flow past superhydrophobic surfaces. In addition, the designs and limitations on a special class of materials called superhydrophobic surfaces that have been used recently to engineer large

  10. Simulating Fluids Exhibiting Microstructure

    E-Print Network [OSTI]

    Title: Simulating Fluids Exhibiting Microstructure Speaker: Noel J. Walkington, ... fluids containing elastic particles, and polymer fluids, all exhibit non-trivial ...

  11. Fluid extraction

    DOE Patents [OSTI]

    Wai, Chien M. (Moscow, ID); Laintz, Kenneth E. (Los Alamos, NM)

    1999-01-01T23:59:59.000Z

    A method of extracting metalloid and metal species from a solid or liquid material by exposing the material to a supercritical fluid solvent containing a chelating agent is described. The chelating agent forms chelates that are soluble in the supercritical fluid to allow removal of the species from the material. In preferred embodiments, the extraction solvent is supercritical carbon dioxide and the chelating agent is a fluorinated .beta.-diketone. In especially preferred embodiments the extraction solvent is supercritical carbon dioxide, and the chelating agent comprises a fluorinated .beta.-diketone and a trialkyl phosphate, or a fluorinated .beta.-diketone and a trialkylphosphine oxide. Although a trialkyl phosphate can extract lanthanides and actinides from acidic solutions, a binary mixture comprising a fluorinated .beta.-diketone and a trialkyl phosphate or a trialkylphosphine oxide tends to enhance the extraction efficiencies for actinides and lanthanides. The method provides an environmentally benign process for removing contaminants from industrial waste without using acids or biologically harmful solvents. The method is particularly useful for extracting actinides and lanthanides from acidic solutions. The chelate and supercritical fluid can be regenerated, and the contaminant species recovered, to provide an economic, efficient process.

  12. ~,,{--Oz ~~~,,,,,,{{{--OOOzzz

    E-Print Network [OSTI]

    Zhang, Li-Xin

    U = pU (t) ÷veã·§, PpL (T t) = /2, PpU (T t) = 1-PpU (T t+1) = /2. K[pL(T), pU (T)]´p~&Y²·1 - ~&«m, ·§ du #12;1o�!«m O §ÏéͶþ ~,,·{--ò�OþͶþz pL = pL(t), pU = pU (t) ÷veã·§, PpL (T t) = /2, PpU (T t·§, PpL (T t) = /2, PpU (T t) = 1-PpU (T t+1) = /2. K[pL(T), pU (T)]´p~&Y²·1 - ~&«m, ·§ du P

  13. 18th AIAA Computational Fluid Dynamics Conference, June 2528, 2007, Miami, FL Petaflops Opportunities for the NASA Fundamental

    E-Print Network [OSTI]

    Peraire, Jaime

    in high performance computing at the national level. Advocacy for high performance computing has role as a leading advocate for high performance computational engi- neering at the national level. We in formulating the case for increased investment in high performance computing activities, and that a similar

  14. Fluid Inclusion Gas Analysis

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Dilley, Lorie

    Fluid inclusion gas analysis for wells in various geothermal areas. Analyses used in developing fluid inclusion stratigraphy for wells and defining fluids across the geothermal fields. Each sample has mass spectrum counts for 180 chemical species.

  15. Fluid Inclusion Gas Analysis

    SciTech Connect (OSTI)

    Dilley, Lorie

    2013-01-01T23:59:59.000Z

    Fluid inclusion gas analysis for wells in various geothermal areas. Analyses used in developing fluid inclusion stratigraphy for wells and defining fluids across the geothermal fields. Each sample has mass spectrum counts for 180 chemical species.

  16. 8798_FL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del(ANL-IN-03-032) -Less isNFebruaryOctober 2, AlgeriaQ1 Q2 Q3 U . S .1α,RESEARCH

  17. DOE - Office of Legacy Management -- University of Miami - FL 0-01

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group currentBradleyTableSelling Corp -K LeDowntownUnited NuclearMiami - FL 0-01

  18. Standardization of Thermo-Fluid Modeling in Modelica.Fluid

    E-Print Network [OSTI]

    Franke, Rudiger

    2010-01-01T23:59:59.000Z

    Thermo-Fluid Systems, Modelica 2003 Conference, Linköping,H. Tummescheit: The Modelica Fluid and Media Library forThermo-Fluid Pipe Networks, Modelica 2006 Conference, Vi-

  19. By Joseph M. Gambogi Titanium (Ti) is a lightweight metal well Springs, FL; E. I. du Pont de Nemours & Co.

    E-Print Network [OSTI]

    1 TITANIUM By Joseph M. Gambogi Titanium (Ti) is a lightweight metal well Springs, FL; E. I. du mineral strength-to-weight ratio. Titanium comprises sands deposits; and P. W. Gillibrand Co., Simi about, rutile, and producer of natural rutile. Kerr-McGee sphene. Although titanium is best known for its

  20. Fluid sampling tool

    DOE Patents [OSTI]

    Johnston, Roger G. (Los Alamos, NM); Garcia, Anthony R. E. (Espanola, NM); Martinez, Ronald K. (Santa Cruz, NM)

    2001-09-25T23:59:59.000Z

    The invention includes a rotatable tool for collecting fluid through the wall of a container. The tool includes a fluid collection section with a cylindrical shank having an end portion for drilling a hole in the container wall when the tool is rotated, and a threaded portion for tapping the hole in the container wall. A passageway in the shank in communication with at least one radial inlet hole in the drilling end and an opening at the end of the shank is adapted to receive fluid from the container. The tool also includes a cylindrical chamber affixed to the end of the shank opposite to the drilling portion thereof for receiving and storing fluid passing through the passageway. The tool also includes a flexible, deformable gasket that provides a fluid-tight chamber to confine kerf generated during the drilling and tapping of the hole. The invention also includes a fluid extractor section for extracting fluid samples from the fluid collecting section.

  1. Viscous fluid dynamics

    E-Print Network [OSTI]

    A. K. Chaudhuri

    2007-03-12T23:59:59.000Z

    We briefly discuss the phenomenological theory of dissipative fluid. We also present some numerical results for hydrodynamic evolution of QGP fluid with dissipation due to shear viscosity only. Its effect on particle production is also studied.

  2. HEAT TRANSFER FLUIDS

    E-Print Network [OSTI]

    Lenert, Andrej

    2012-01-01T23:59:59.000Z

    The choice of heat transfer fluids has significant effects on the performance, cost, and reliability of solar thermal systems. In this chapter, we evaluate existing heat transfer fluids such as oils and molten salts based ...

  3. Standardization of Thermo-Fluid Modeling in Modelica.Fluid

    E-Print Network [OSTI]

    Franke, Rudiger

    2010-01-01T23:59:59.000Z

    Ob- ject-Oriented Modeling of Thermo-Fluid Systems, Modelicable and Compressible Thermo-Fluid Pipe Networks, ModelicaStandardization of Thermo-Fluid Modeling in Modelica.Fluid

  4. View dependent fluid dynamics

    E-Print Network [OSTI]

    Barran, Brian Arthur

    2006-08-16T23:59:59.000Z

    , are modified to support a nonuniform simulation grid. In addition, infinite fluid boundary conditions are introduced that allow fluid to flow freely into or out of the simulation domain to achieve the effect of large, boundary free bodies of fluid. Finally, a...

  5. Spinning fluids reactor

    SciTech Connect (OSTI)

    Miller, Jan D; Hupka, Jan; Aranowski, Robert

    2012-11-20T23:59:59.000Z

    A spinning fluids reactor, includes a reactor body (24) having a circular cross-section and a fluid contactor screen (26) within the reactor body (24). The fluid contactor screen (26) having a plurality of apertures and a circular cross-section concentric with the reactor body (24) for a length thus forming an inner volume (28) bound by the fluid contactor screen (26) and an outer volume (30) bound by the reactor body (24) and the fluid contactor screen (26). A primary inlet (20) can be operatively connected to the reactor body (24) and can be configured to produce flow-through first spinning flow of a first fluid within the inner volume (28). A secondary inlet (22) can similarly be operatively connected to the reactor body (24) and can be configured to produce a second flow of a second fluid within the outer volume (30) which is optionally spinning.

  6. Fluid Dynamics Seminar Fluid Dynamics Research Centre

    E-Print Network [OSTI]

    Davies, Christopher

    France) 8th Nov. Future Trends in Condition Monitoring of Rotating Machines Using System Identification Simulation of the Cooling of a Simplified Brake Disc Dr. Thorsten J. Möller, (Institute for Fluid Mechanics

  7. Fluid Dynamics Seminar Fluid Dynamics Research Centre

    E-Print Network [OSTI]

    Thomas, Peter J.

    France) 8 th Nov. Future Trends in Condition Monitoring of Rotating Machines Using System Identification Simulation of the Cooling of a Simplified Brake Disc Dr. Thorsten J. Möller, (Institute for Fluid Mechanics

  8. Comparison of Chloroflexus aurantiacus strain J-10-fl proteomes of cells grown chemoheterotrophically and photoheterotrophically

    SciTech Connect (OSTI)

    Cao, Li; Bryant, Donald A.; Schepmoes, Athena A.; Vogl, Kajetan; Smith, Richard D.; Lipton, Mary S.; Callister, Stephen J.

    2012-01-17T23:59:59.000Z

    Chloroflexus aurantiacus J-10-fl is a thermophilic green bacterium, a filamentous anoxygenic phototroph, and the model organism of the phylum Chloroflexi. We applied high-throughput, liquid chromatography-mass spectrometry in a global quantitative proteomics investigation of C. aurantiacus cells grown under oxic (chemoorganoheterotrophically) and anoxic (photoorganoheterotrophically) redox states. Our global analysis identified 13,524 high-confidence peptides that matched to 1,286 annotated proteins, 242 of which were either uniquely identified or significantly increased in abundance under anoxic culture conditions. Fifty-three of the 242 proteins are previously characterized photosynthesis-related proteins, including chlorosome proteins, proteins involved in the bacteriochlorophyll biosynthesis, 3-hydroxypropionate (3-OHP) CO2 fixation pathway, and components of electron transport chains. The remaining 190 proteins have not previously been reported. Of these, five proteins were found to be encoded by genes from a novel operon and observed only in photoheterotrophically grown cells. These proteins candidates may prove useful in further deciphering the phototrophic physiology of C. aurantiacus and other filamentous anoxygenic phototrophs.

  9. Disposal of drilling fluids

    SciTech Connect (OSTI)

    Bryson, W.R.

    1983-06-01T23:59:59.000Z

    Prior to 1974 the disposal of drilling fluids was not considered to be much of an environmental problem. In the past, disposal of drilling fluids was accomplished in various ways such as spreading on oil field lease roads to stabilize the road surface and control dust, spreading in the base of depressions of sandy land areas to increase water retention, and leaving the fluid in the reserve pit to be covered on closure of the pit. In recent years, some states have become concerned over the indescriminate dumping of drilling fluids into pits or unauthorized locations and have developed specific regulations to alleviate the perceived deterioration of environmental and groundwater quality from uncontrolled disposal practices. The disposal of drilling fluids in Kansas is discussed along with a newer method or treatment in drilling fluid disposal.

  10. Fiber optic fluid detector

    DOE Patents [OSTI]

    Angel, S.M.

    1987-02-27T23:59:59.000Z

    Particular gases or liquids are detected with a fiber optic element having a cladding or coating of a material which absorbs the fluid or fluids and which exhibits a change of an optical property, such as index of refraction, light transmissiveness or fluoresence emission, for example, in response to absorption of the fluid. The fluid is sensed by directing light into the fiber optic element and detecting changes in the light, such as exit angle changes for example, that result from the changed optical property of the coating material. The fluid detector may be used for such purposes as sensing toxic or explosive gases in the atmosphere, measuring ground water contamination or monitoring fluid flows in industrial processes, among other uses. 10 figs.

  11. Metalworking and machining fluids

    DOE Patents [OSTI]

    Erdemir, Ali (Naperville, IL); Sykora, Frank (Caledon, ON, CA); Dorbeck, Mark (Brighton, MI)

    2010-10-12T23:59:59.000Z

    Improved boron-based metal working and machining fluids. Boric acid and boron-based additives that, when mixed with certain carrier fluids, such as water, cellulose and/or cellulose derivatives, polyhydric alcohol, polyalkylene glycol, polyvinyl alcohol, starch, dextrin, in solid and/or solvated forms result in improved metalworking and machining of metallic work pieces. Fluids manufactured with boric acid or boron-based additives effectively reduce friction, prevent galling and severe wear problems on cutting and forming tools.

  12. Adsorption Kinetics of Surfactants at Fluid-Fluid Interfaces

    E-Print Network [OSTI]

    Andelman, David

    Adsorption Kinetics of Surfactants at Fluid-Fluid Interfaces Haim Diamant and David Andelman School-Fluid Interfaces, Adsorption, Adsorption Kinetics, Interfacial Tension. 1 #12;Abstract We review a new theoretical approach to the kinetics of surfactant adsorption at fluid-fluid interfaces. It yields a more complete

  13. FSU Health Compliance Record fax to 8506448958 or mail to 960 Learning Way, Tallahassee, FL 323064178 Part A--Print or type. Illegible forms will not be processed.

    E-Print Network [OSTI]

    Weston, Ken

    323064178 Part A--Print or type. Illegible forms will not be processed. STUDENT NAME, Tallahassee, FL 323064178 Part A--Print or type. Illegible forms will not be processed. STUDENT

  14. Fluid delivery control system

    DOE Patents [OSTI]

    Hoff, Brian D.; Johnson, Kris William; Algrain, Marcelo C.; Akasam, Sivaprasad

    2006-06-06T23:59:59.000Z

    A method of controlling the delivery of fluid to an engine includes receiving a fuel flow rate signal. An electric pump is arranged to deliver fluid to the engine. The speed of the electric pump is controlled based on the fuel flow rate signal.

  15. Fluid blade disablement tool

    DOE Patents [OSTI]

    Jakaboski, Juan-Carlos (Albuquerque, NM); Hughs, Chance G. (Albuquerque, NM); Todd, Steven N. (Rio Rancho, NM)

    2012-01-10T23:59:59.000Z

    A fluid blade disablement (FBD) tool that forms both a focused fluid projectile that resembles a blade, which can provide precision penetration of a barrier wall, and a broad fluid projectile that functions substantially like a hammer, which can produce general disruption of structures behind the barrier wall. Embodiments of the FBD tool comprise a container capable of holding fluid, an explosive assembly which is positioned within the container and which comprises an explosive holder and explosive, and a means for detonating. The container has a concavity on the side adjacent to the exposed surface of the explosive. The position of the concavity relative to the explosive and its construction of materials with thicknesses that facilitate inversion and/or rupture of the concavity wall enable the formation of a sharp and coherent blade of fluid advancing ahead of the detonation gases.

  16. FRACTURING FLUID CHARACTERIZATION FACILITY

    SciTech Connect (OSTI)

    Subhash Shah

    2000-08-01T23:59:59.000Z

    Hydraulic fracturing technology has been successfully applied for well stimulation of low and high permeability reservoirs for numerous years. Treatment optimization and improved economics have always been the key to the success and it is more so when the reservoirs under consideration are marginal. Fluids are widely used for the stimulation of wells. The Fracturing Fluid Characterization Facility (FFCF) has been established to provide the accurate prediction of the behavior of complex fracturing fluids under downhole conditions. The primary focus of the facility is to provide valuable insight into the various mechanisms that govern the flow of fracturing fluids and slurries through hydraulically created fractures. During the time between September 30, 1992, and March 31, 2000, the research efforts were devoted to the areas of fluid rheology, proppant transport, proppant flowback, dynamic fluid loss, perforation pressure losses, and frictional pressure losses. In this regard, a unique above-the-ground fracture simulator was designed and constructed at the FFCF, labeled ''The High Pressure Simulator'' (HPS). The FFCF is now available to industry for characterizing and understanding the behavior of complex fluid systems. To better reflect and encompass the broad spectrum of the petroleum industry, the FFCF now operates under a new name of ''The Well Construction Technology Center'' (WCTC). This report documents the summary of the activities performed during 1992-2000 at the FFCF.

  17. Multiphase fluid characterization system

    DOE Patents [OSTI]

    Sinha, Dipen N.

    2014-09-02T23:59:59.000Z

    A measurement system and method for permitting multiple independent measurements of several physical parameters of multiphase fluids flowing through pipes are described. Multiple acoustic transducers are placed in acoustic communication with or attached to the outside surface of a section of existing spool (metal pipe), typically less than 3 feet in length, for noninvasive measurements. Sound speed, sound attenuation, fluid density, fluid flow, container wall resonance characteristics, and Doppler measurements for gas volume fraction may be measured simultaneously by the system. Temperature measurements are made using a temperature sensor for oil-cut correction.

  18. Supercritical fluid extraction

    DOE Patents [OSTI]

    Wai, Chien M. (Moscow, ID); Laintz, Kenneth (Pullman, WA)

    1994-01-01T23:59:59.000Z

    A method of extracting metalloid and metal species from a solid or liquid material by exposing the material to a supercritical fluid solvent containing a chelating agent. The chelating agent forms chelates that are soluble in the supercritical fluid to allow removal of the species from the material. In preferred embodiments, the extraction solvent is supercritical carbon dioxide and the chelating agent is a fluorinated or lipophilic crown ether or fluorinated dithiocarbamate. The method provides an environmentally benign process for removing contaminants from industrial waste without using acids or biologically harmful solvents. The chelate and supercritical fluid can be regenerated, and the contaminant species recovered, to provide an economic, efficient process.

  19. Basic fluid system trainer

    DOE Patents [OSTI]

    Semans, Joseph P. (Uniontown, PA); Johnson, Peter G. (Pittsburgh, PA); LeBoeuf, Jr., Robert F. (Clairton, PA); Kromka, Joseph A. (Idaho Falls, ID); Goron, Ronald H. (Connellsville, PA); Hay, George D. (Venetia, PA)

    1993-01-01T23:59:59.000Z

    A trainer, mounted and housed within a mobile console, is used to teach and reinforce fluid principles to students. The system trainer has two centrifugal pumps, each driven by a corresponding two-speed electric motor. The motors are controlled by motor controllers for operating the pumps to circulate the fluid stored within a supply tank through a closed system. The pumps may be connected in series or in parallel. A number of valves are also included within the system to effect different flow paths for the fluid. In addition, temperature and pressure sensing instruments are installed throughout the closed system for measuring the characteristics of the fluid, as it passes through the different valves and pumps. These measurements are indicated on a front panel mounted to the console, as a teaching aid, to allow the students to observe the characteristics of the system.

  20. Basic fluid system trainer

    SciTech Connect (OSTI)

    Semans, J.P.; Johnson, P.G.; LeBoeuf, R.F. Jr.; Kromka, J.A.; Goron, R.H.; Hay, G.D.

    1991-04-30T23:59:59.000Z

    This invention, a trainer mounted and housed within a mobile console, is used to teach and reinforce fluid principles to students. The system trainer has two centrifugal pumps, each driven by a corresponding two-speed electric motor. The motors are controlled by motor controllers for operating the pumps to circulate the fluid stored within a supply tank through a closed system. The pumps may be connected in series or in parallel. A number of valves are also included within the system to effect different flow paths for the fluid. In addition, temperature and pressure sensing instruments are installed throughout the closed system for measuring the characteristics of the fluid, as it passes through the different valves and pumps. These measurements are indicated on a front panel mounted to the console, as a teaching aid, to allow the students to observe the characteristics of the system.

  1. Circulating Fluid Bed Combustor

    E-Print Network [OSTI]

    Fraley, L. D.; Do, L. N.; Hsiao, K. H.

    1982-01-01T23:59:59.000Z

    The circulating bed combustor represents an alternative concept of burning coal in fluid bed technology, which offers distinct advantages over both the current conventional fluidized bed combustion system and the pulverized coal boilers equipped...

  2. Phoresis in fluids

    E-Print Network [OSTI]

    Brenner, Howard

    This paper presents a unified theory of phoretic phenomena in single-component fluids. Simple formulas are given for the phoretic velocities of small inert force-free non-Brownian particles migrating through otherwise ...

  3. Fluid pumping apparatus

    DOE Patents [OSTI]

    West, Phillip B. (Idaho Falls, ID)

    2006-01-17T23:59:59.000Z

    A method and apparatus suitable for coupling seismic or other downhole sensors to a borehole wall in high temperature and pressure environments. In one embodiment, one or more metal bellows mounted to a sensor module are inflated to clamp the sensor module within the borehole and couple an associated seismic sensor to a borehole wall. Once the sensing operation is complete, the bellows are deflated and the sensor module is unclamped by deflation of the metal bellows. In a further embodiment, a magnetic drive pump in a pump module is used to supply fluid pressure for inflating the metal bellows using borehole fluid or fluid from a reservoir. The pump includes a magnetic drive motor configured with a rotor assembly to be exposed to borehole fluid pressure including a rotatable armature for driving an impeller and an associated coil under control of electronics isolated from borehole pressure.

  4. Ultrarelativistic fluid dynamics

    E-Print Network [OSTI]

    David W. Neilsen; Matthew W. Choptuik

    1999-04-20T23:59:59.000Z

    This is the first of two papers examining the critical collapse of spherically symmetric perfect fluids with the equation of state P = (Gamma -1)rho. Here we present the equations of motion and describe a computer code capable of simulating the extremely relativistic flows encountered in critical solutions for Gamma <= 2. The fluid equations are solved using a high-resolution shock-capturing scheme based on a linearized Riemann solver.

  5. Valve for fluid control

    DOE Patents [OSTI]

    Oborny, Michael C. (Albuquerque, NM); Paul, Phillip H. (Livermore, CA); Hencken, Kenneth R. (Pleasanton, CA); Frye-Mason, Gregory C. (Cedar Crest, NM); Manginell, Ronald P. (Albuquerque, NM)

    2001-01-01T23:59:59.000Z

    A valve for controlling fluid flows. This valve, which includes both an actuation device and a valve body provides: the ability to incorporate both the actuation device and valve into a unitary structure that can be placed onto a microchip, the ability to generate higher actuation pressures and thus control higher fluid pressures than conventional microvalves, and a device that draws only microwatts of power. An electrokinetic pump that converts electric potential to hydraulic force is used to operate, or actuate, the valve.

  6. Fractal Inspired Models of Quark and Gluon Distributions and Longitudinal Structure Function FL(x, Q2) at small x

    E-Print Network [OSTI]

    Akbari Jahan; D. K. Choudhury

    2010-12-30T23:59:59.000Z

    In recent years, Fractal Inspired Models of quark and gluon densities at small x have been proposed. In this paper, we investigate longitudinal structure function F-L (x, Q2) within this approach. We make predictions using the QCD based approximate relation between the longitudinal structure function and the gluon density. As the Altarelli-Martinelli equation for the longitudinal structure function cannot be applied to Model I due to the presence of a singularity in the Bjorken x-space we consider Model II only. The qualitative feature of the prediction of Model II is found to be compatible with the QCD expectation.

  7. CSE Master Specialization Fluid Dynamics

    E-Print Network [OSTI]

    Lang, Annika

    CSE Master Specialization Fluid Dynamics Course Semester Fluid Dynamics II HS Quantitative Flow Energie- und Verfahrenstechnik FS Biofluiddynamics FS #12;CSE in Fluid Dynamics: Very large high in Fluid Dynamics: Physiology of the inner ear MicroCT imaging Multilayer MFS for Stokes flow simulations

  8. Fluorescent fluid interface position sensor

    DOE Patents [OSTI]

    Weiss, Jonathan D.

    2004-02-17T23:59:59.000Z

    A new fluid interface position sensor has been developed, which is capable of optically determining the location of an interface between an upper fluid and a lower fluid, the upper fluid having a larger refractive index than a lower fluid. The sensor functions by measurement, of fluorescence excited by an optical pump beam which is confined within a fluorescent waveguide where that waveguide is in optical contact with the lower fluid, but escapes from the fluorescent waveguide where that waveguide is in optical contact with the upper fluid.

  9. Fluid driven reciprocating apparatus

    DOE Patents [OSTI]

    Whitehead, J.C.

    1997-04-01T23:59:59.000Z

    An apparatus is described comprising a pair of fluid driven pump assemblies in a back-to-back configuration to yield a bi-directional pump. Each of the pump assemblies includes a piston or diaphragm which divides a chamber therein to define a power section and a pumping section. An intake-exhaust valve is connected to each of the power sections of the pump chambers, and function to direct fluid, such as compressed air, into the power section and exhaust fluid therefrom. At least one of the pistons or diaphragms is connected by a rod assembly which is constructed to define a signal valve, whereby the intake-exhaust valve of one pump assembly is controlled by the position or location of the piston or diaphragm in the other pump assembly through the operation of the rod assembly signal valve. Each of the pumping sections of the pump assemblies are provided with intake and exhaust valves to enable filling of the pumping section with fluid and discharging fluid therefrom when a desired pressure has been reached. 13 figs.

  10. Fluid driven recipricating apparatus

    DOE Patents [OSTI]

    Whitehead, John C. (Davis, CA)

    1997-01-01T23:59:59.000Z

    An apparatus comprising a pair of fluid driven pump assemblies in a back-to-back configuration to yield a bi-directional pump. Each of the pump assemblies includes a piston or diaphragm which divides a chamber therein to define a power section and a pumping section. An intake-exhaust valve is connected to each of the power sections of the pump chambers, and function to direct fluid, such as compressed air, into the power section and exhaust fluid therefrom. At least one of the pistons or diaphragms is connected by a rod assembly which is constructed to define a signal valve, whereby the intake-exhaust valve of one pump assembly is controlled by the position or location of the piston or diaphragm in the other pump assembly through the operation of the rod assembly signal valve. Each of the pumping sections of the pump assemblies are provided with intake and exhaust valves to enable filling of the pumping section with fluid and discharging fluid therefrom when a desired pressure has been reached.

  11. Fluid accumulation in thin-film fl ows driven by surface tension and gravity (I): Rigorous analysis of a drainage equation

    E-Print Network [OSTI]

    Cuesta, C M

    2011-01-01T23:59:59.000Z

    We derive a boundary layer equation describing accumulation regions within a thin-film approximation framework where gravity and surface tension balance. As part of the analysis of this problem we investigate in detail and rigorously the 'drainage' equation (phi"'+1)phi^3=1. In particular, we prove that all solutions that do not tend to 1 as the independent variable goes to infinity are oscillatory, and that they oscillate in a very specific way. This result and the method of proof will be used in the analysis of solutions of the afore mentioned boundary layer problem.

  12. Hazardous fluid leak detector

    DOE Patents [OSTI]

    Gray, Harold E. (Las Vegas, NV); McLaurin, Felder M. (Las Vegas, NV); Ortiz, Monico (Las Vegas, NV); Huth, William A. (Las Vegas, NV)

    1996-01-01T23:59:59.000Z

    A device or system for monitoring for the presence of leaks from a hazardous fluid is disclosed which uses two electrodes immersed in deionized water. A gas is passed through an enclosed space in which a hazardous fluid is contained. Any fumes, vapors, etc. escaping from the containment of the hazardous fluid in the enclosed space are entrained in the gas passing through the enclosed space and transported to a closed vessel containing deionized water and two electrodes partially immersed in the deionized water. The electrodes are connected in series with a power source and a signal, whereby when a sufficient number of ions enter the water from the gas being bubbled through it (indicative of a leak), the water will begin to conduct, thereby allowing current to flow through the water from one electrode to the other electrode to complete the circuit and activate the signal.

  13. TRACING FLUID SOURCES IN THE COSO GEOTHERMAL SYSTEM USING FLUID...

    Open Energy Info (EERE)

    FLUID-INCLUSION GAS CHEMISTRY Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Proceedings: TRACING FLUID SOURCES IN THE COSO GEOTHERMAL SYSTEM USING...

  14. MEASUREMENT OF INTERFACIAL TENSION IN FLUID-FLUID SYSTEMS

    E-Print Network [OSTI]

    Loh, Watson

    MEASUREMENT OF INTERFACIAL TENSION IN FLUID-FLUID SYSTEMS J. Drelich Ch. Fang C.L. White Michigan been used to measure interfacial tensions between immisci- ble fluid phases. A recent monograph sources of information on the in- terfacial tension measurement methods include selected chapters in Refs

  15. Magnetically stimulated fluid flow patterns

    ScienceCinema (OSTI)

    Martin, Jim; Solis, Kyle

    2014-08-06T23:59:59.000Z

    Sandia National Laboratories' Jim Martin and Kyle Solis explain research on the effects of magnetic fields on fluid flows and how they stimulate vigorous flows. Fluid flow is a necessary phenomenon in everything from reactors to cooling engines in cars.

  16. Magnetically stimulated fluid flow patterns

    SciTech Connect (OSTI)

    Martin, Jim; Solis, Kyle

    2014-03-06T23:59:59.000Z

    Sandia National Laboratories' Jim Martin and Kyle Solis explain research on the effects of magnetic fields on fluid flows and how they stimulate vigorous flows. Fluid flow is a necessary phenomenon in everything from reactors to cooling engines in cars.

  17. Monolithically Peltier-cooled vertical-cavity surface-emitting lasers Paul FL Berger, Niloy K. Dutta, Kent D. Choquette, Ghulam Hasnain, and Naresh Chand

    E-Print Network [OSTI]

    Monolithically Peltier-cooled vertical-cavity surface-emitting lasers Paul FL Berger, Niloy K. The thermoelectric element is the n + -GaAs substrate based on the Peltier effect. A variation of active region contact on the n + -GaAs substrate. The thermoelectric (Peltier) ef- fect of the n f -GaAs substrate can

  18. Embracing and Empowering Women to Serve Central Florida PO BOX 2895 Orlando FL 32802 ! wecOrlando.com ! facebook.com/wecOrlando ! scholarships@wecOrlando.com

    E-Print Network [OSTI]

    Van Stryland, Eric

    Orlando.com ! facebook.com/wecOrlando ! scholarships@wecOrlando.com 42nd ANNUAL WOMEN'S ACHIEVEMENT AWARDS EVENT Monday Orlando FL 32802 ! wecOrlando.com ! facebook.com/wecOrlando ! scholarships@wecOrlando.com All information 32802 ! wecOrlando.com ! facebook.com/wecOrlando ! scholarships@wecOrlando.com Please provide three (3

  19. Proceedings of the 1997 IEEE International Conference on Systems, Man, and Cybernetics (SMC'97) . Orlando, FL . Oct. 1215, 1997 DATA REPRESENTATION AND ORGANIZATION FOR AN INDUSTRIAL MULTISENSOR

    E-Print Network [OSTI]

    Naish, Michael D.

    INTEGRATION ARCHITECTURE Michael D. Naish and Elizabeth A. Croft Industrial Automation Laboratory Department) . Orlando, FL . Oct. 12­15, 1997 DATA REPRESENTATION AND ORGANIZATION FOR AN INDUSTRIAL MULTISENSOR@mech.ubc.ca ABSTRACT An open architecture for intelligent multisensor integra­ tion in an industrial environment

  20. Oscillating fluid power generator

    DOE Patents [OSTI]

    Morris, David C

    2014-02-25T23:59:59.000Z

    A system and method for harvesting the kinetic energy of a fluid flow for power generation with a vertically oriented, aerodynamic wing structure comprising one or more airfoil elements pivotably attached to a mast. When activated by the moving fluid stream, the wing structure oscillates back and forth, generating lift first in one direction then in the opposite direction. This oscillating movement is converted to unidirectional rotational movement in order to provide motive power to an electricity generator. Unlike other oscillating devices, this device is designed to harvest the maximum aerodynamic lift forces available for a given oscillation cycle. Because the system is not subjected to the same intense forces and stresses as turbine systems, it can be constructed less expensively, reducing the cost of electricity generation. The system can be grouped in more compact clusters, be less evident in the landscape, and present reduced risk to avian species.

  1. Fluid bed material transfer method

    DOE Patents [OSTI]

    Pinske, Jr., Edward E. (Akron, OH)

    1994-01-01T23:59:59.000Z

    A fluidized bed apparatus comprising a pair of separated fluid bed enclosures, each enclosing a fluid bed carried on an air distributor plate supplied with fluidizing air from below the plate. At least one equalizing duct extending through sidewalls of both fluid bed enclosures and flexibly engaged therewith to communicate the fluid beds with each other. The equalizing duct being surrounded by insulation which is in turn encased by an outer duct having expansion means and being fixed between the sidewalls of the fluid bed enclosures.

  2. Viscous dark fluid

    E-Print Network [OSTI]

    V. Folomeev; V. Gurovich

    2007-10-15T23:59:59.000Z

    The unified dark energy and dark matter model within the framework of a model of a continuous medium with bulk viscosity (dark fluid) is considered. It is supposed that the bulk viscosity coefficient is an arbitrary function of the Hubble parameter. The choice of this function is carried out under the requirement to satisfy the observational data from recombination ($z\\approx 1000$) till present time.

  3. Downhole Fluid Analyzer Development

    SciTech Connect (OSTI)

    Bill Turner

    2006-11-28T23:59:59.000Z

    A novel fiber optic downhole fluid analyzer has been developed for operation in production wells. This device will allow real-time determination of the oil, gas and water fractions of fluids from different zones in a multizone or multilateral completion environment. The device uses near infrared spectroscopy and induced fluorescence measurement to unambiguously determine the oil, water and gas concentrations at all but the highest water cuts. The only downhole components of the system are the fiber optic cable and windows. All of the active components--light sources, sensors, detection electronics and software--will be located at the surface, and will be able to operate multiple downhole probes. Laboratory testing has demonstrated that the sensor can accurately determine oil, water and gas fractions with a less than 5 percent standard error. Once installed in an intelligent completion, this sensor will give the operating company timely information about the fluids arising from various zones or multilaterals in a complex completion pattern, allowing informed decisions to be made on controlling production. The research and development tasks are discussed along with a market analysis.

  4. LUBRICANTS AND HYDRAULIC FLUIDS

    E-Print Network [OSTI]

    Engineer Manual Department

    Contents) Major General, USA Chief of Staff i Table of Contents Purpose ........................................................ 1-1 1-1 Applicability .................................................... 1-2 1-1 References ...................................................... 1-3 1-1 Distribution Statement ............................................. 1-4 1-1 Scope ......................................................... 1-5 1-2 Friction ........................................................ 2-1 2-1 Wear .......................................................... 2-2 2-4 Lubrication and Lubricants ......................................... 2-3 2-6 Hydrodynamic or Fluid Film Lubrication ............................... 2-4 2-6 Boundary Lubrication ............................................. 2-5 2-8 Extreme Pressure (EP) Lubrication ................................... 2-6 2-9 Elastohydrodynamic (EHD) Lubrication ................................ 2-7 2-9 Oil R

  5. Ultrasonic Fluid Quality Sensor System

    DOE Patents [OSTI]

    Gomm, Tyler J. (Meridian, ID); Kraft, Nancy C. (Idaho Falls, ID); Phelps, Larry D. (Pocatello, ID); Taylor, Steven C. (Idaho Falls, ID)

    2003-10-21T23:59:59.000Z

    A system for determining the composition of a multiple-component fluid and for determining linear flow comprising at least one sing-around circuit that determines the velocity of a signal in the multiple-component fluid and that is correlatable to a database for the multiple-component fluid. A system for determining flow uses two of the inventive circuits, one of which is set at an angle that is not perpendicular to the direction of flow.

  6. Ultrasonic fluid quality sensor system

    DOE Patents [OSTI]

    Gomm, Tyler J. (Meridian, ID); Kraft, Nancy C. (Idaho Falls, ID); Phelps, Larry D. (Pocatello, ID); Taylor, Steven C. (Idaho Falls, ID)

    2002-10-08T23:59:59.000Z

    A system for determining the composition of a multiple-component fluid and for determining linear flow comprising at least one sing-around circuit that determines the velocity of a signal in the multiple-component fluid and that is correlatable to a database for the multiple-component fluid. A system for determining flow uses two of the inventive circuits, one of which is set at an angle that is not perpendicular to the direction of flow.

  7. Fluid system for controlling fluid losses during hydrocarbon recovery operations

    SciTech Connect (OSTI)

    Johnson, M.H.; Smejkal, K.D.

    1993-07-20T23:59:59.000Z

    A fluid system is described for controlling fluid losses during hydrocarbon recovery operations, comprising: water; a distribution of graded calcium carbonate particle sizes; and at least one modified lignosulfonate, which is a lignosulfonate modified by polymerizing it at least to an extent effective to reduce its water solubility.

  8. Spin and Madelung fluid

    E-Print Network [OSTI]

    G. Salesi

    2009-06-23T23:59:59.000Z

    Starting from the Pauli current we obtain the decomposition of the non-relativistic local velocity in two parts: one parallel and the other orthogonal to the momentum. The former is recognized to be the ``classical'' part, that is the velocity of the center-of-mass, and the latter the ``quantum'' one, that is the velocity of the motion in the center-of-mass frame (namely, the internal ``spin motion'' or {\\em Zitterbewegung}). Inserting the complete expression of the velocity into the kinetic energy term of the classical non-relativistic (i.e., Newtonian) Lagrangian, we straightforwardly derive the so-called ``quantum potential'' associated to the Madelung fluid. In such a way, the quantum mechanical behaviour of particles appears to be strictly correlated to the existence of spin and Zitterbewegung.

  9. Fluid jet electric discharge source

    DOE Patents [OSTI]

    Bender, Howard A. (Ripon, CA)

    2006-04-25T23:59:59.000Z

    A fluid jet or filament source and a pair of coaxial high voltage electrodes, in combination, comprise an electrical discharge system to produce radiation and, in particular, EUV radiation. The fluid jet source is composed of at least two serially connected reservoirs, a first reservoir into which a fluid, that can be either a liquid or a gas, can be fed at some pressure higher than atmospheric and a second reservoir maintained at a lower pressure than the first. The fluid is allowed to expand through an aperture into a high vacuum region between a pair of coaxial electrodes. This second expansion produces a narrow well-directed fluid jet whose size is dependent on the size and configuration of the apertures and the pressure used in the reservoir. At some time during the flow of the fluid filament, a high voltage pulse is applied to the electrodes to excite the fluid to form a plasma which provides the desired radiation; the wavelength of the radiation being determined by the composition of the fluid.

  10. Finite element simulation of electrorheological fluids

    E-Print Network [OSTI]

    Rhyou, Chanryeol, 1973-

    2005-01-01T23:59:59.000Z

    Electrorheological (ER) fluids change their flow properties dramatically when an electric field is applied. These fluids are usually composed of dispersions of polarizable particles in an insulating base fluid or composed ...

  11. Variable flexure-based fluid filter

    DOE Patents [OSTI]

    Brown, Steve B.; Colston Jr., Billy W.; Marshall, Graham; Wolcott, Duane

    2007-03-13T23:59:59.000Z

    An apparatus and method for filtering particles from a fluid comprises a fluid inlet, a fluid outlet, a variable size passage between the fluid inlet and the fluid outlet, and means for adjusting the size of the variable size passage for filtering the particles from the fluid. An inlet fluid flow stream is introduced to a fixture with a variable size passage. The size of the variable size passage is set so that the fluid passes through the variable size passage but the particles do not pass through the variable size passage.

  12. Fluid Imaging of Enhanced Geothermal Systems

    Broader source: Energy.gov (indexed) [DOE]

    for Fluids & Fractures - time lapse MTCSEM for fluid imaging - joint CSEM-MTseismic imaging ??? - use MEQ focal information with EM Imaging ScientificTechnical Approach...

  13. Detachment Energies of Spheroidal Particles from Fluid-Fluid Interfaces

    E-Print Network [OSTI]

    Gary B. Davies; Timm Krüger; Peter V. Coveney; Jens Harting

    2014-10-28T23:59:59.000Z

    The energy required to detach a single particle from a fluid-fluid interface is an important parameter for designing certain soft materials, for example, emulsions stabilised by colloidal particles, colloidosomes designed for targeted drug delivery, and bio-sensors composed of magnetic particles adsorbed at interfaces. For a fixed particle volume, prolate and oblate spheroids attach more strongly to interfaces because they have larger particle-interface areas. Calculating the detachment energy of spheroids necessitates the difficult measurement of particle-liquid surface tensions, in contrast with spheres, where the contact angle suffices. We develop a simplified detachment energy model for spheroids which depends only on the particle aspect ratio and the height of the particle centre of mass above the fluid-fluid interface. We use lattice Boltzmann simulations to validate the model and provide quantitative evidence that the approach can be applied to simulate particle-stabilized emulsions, and highlight the experimental implications of this validation.

  14. Fluid flow monitoring device

    DOE Patents [OSTI]

    McKay, M.D.; Sweeney, C.E.; Spangler, B.S. Jr.

    1993-11-30T23:59:59.000Z

    A flow meter and temperature measuring device are described comprising a tube with a body centered therein for restricting flow and a sleeve at the upper end of the tube to carry several channels formed longitudinally in the sleeve to the appropriate axial location where they penetrate the tube to allow pressure measurements and temperature measurements with thermocouples. The high pressure measurement is made using a channel penetrating the tube away from the body and the low pressure measurement is made at a location at the widest part of the body. An end plug seals the end of the device and holes at its upper end allow fluid to pass from the interior of the tube into a plenum. The channels are made by cutting grooves in the sleeve, the grooves widened at the surface of the sleeve and then a strip of sleeve material is welded to the grooves closing the channels. Preferably the sleeve is packed with powdered graphite before cutting the grooves and welding the strips. 7 figures.

  15. Fluid flow monitoring device

    DOE Patents [OSTI]

    McKay, Mark D. (1426 Socastee Dr., North Augusta, SC 29841); Sweeney, Chad E. (3600 Westhampton Dr., Martinez, GA 30907-3036); Spangler, Jr., B. Samuel (2715 Margate Dr., Augusta, GA 30909)

    1993-01-01T23:59:59.000Z

    A flow meter and temperature measuring device comprising a tube with a body centered therein for restricting flow and a sleeve at the upper end of the tube to carry several channels formed longitudinally in the sleeve to the appropriate axial location where they penetrate the tube to allow pressure measurements and temperature measurements with thermocouples. The high pressure measurement is made using a channel penetrating the tube away from the body and the low pressure measurement is made at a location at the widest part of the body. An end plug seals the end of the device and holes at its upper end allow fluid to pass from the interior of the tube into a plenum. The channels are made by cutting grooves in the sleeve, the grooves widened at the surface of the sleeve and then a strip of sleeve material is welded to the grooves closing the channels. Preferably the sleeve is packed with powdered graphite before cutting the grooves and welding the strips.

  16. Computational fluid dynamic applications

    SciTech Connect (OSTI)

    Chang, S.-L.; Lottes, S. A.; Zhou, C. Q.

    2000-04-03T23:59:59.000Z

    The rapid advancement of computational capability including speed and memory size has prompted the wide use of computational fluid dynamics (CFD) codes to simulate complex flow systems. CFD simulations are used to study the operating problems encountered in system, to evaluate the impacts of operation/design parameters on the performance of a system, and to investigate novel design concepts. CFD codes are generally developed based on the conservation laws of mass, momentum, and energy that govern the characteristics of a flow. The governing equations are simplified and discretized for a selected computational grid system. Numerical methods are selected to simplify and calculate approximate flow properties. For turbulent, reacting, and multiphase flow systems the complex processes relating to these aspects of the flow, i.e., turbulent diffusion, combustion kinetics, interfacial drag and heat and mass transfer, etc., are described in mathematical models, based on a combination of fundamental physics and empirical data, that are incorporated into the code. CFD simulation has been applied to a large variety of practical and industrial scale flow systems.

  17. Viscous dark fluid universe

    SciTech Connect (OSTI)

    Hipolito-Ricaldi, W. S. [Universidade Federal do Espirito Santo, Departamento de Ciencias Matematicas e Naturais, CEUNES, Rodovia BR 101 Norte, km. 60, CEP 29932-540, Sao Mateus, Espirito Santo (Brazil); Velten, H. E. S.; Zimdahl, W. [Universidade Federal do Espirito Santo, Departamento de Fisica, Av. Fernando Ferrari, 514, Campus de Goiabeiras, CEP 29075-910, Vitoria, Espirito Santo (Brazil)

    2010-09-15T23:59:59.000Z

    We investigate the cosmological perturbation dynamics for a universe consisting of pressureless baryonic matter and a viscous fluid, the latter representing a unified model of the dark sector. In the homogeneous and isotropic background the total energy density of this mixture behaves as a generalized Chaplygin gas. The perturbations of this energy density are intrinsically nonadiabatic and source relative entropy perturbations. The resulting baryonic matter power spectrum is shown to be compatible with the 2dFGRS and SDSS (DR7) data. A joint statistical analysis, using also Hubble-function and supernovae Ia data, shows that, different from other studies, there exists a maximum in the probability distribution for a negative present value q{sub 0{approx_equal}}-0.53 of the deceleration parameter. Moreover, while previous descriptions on the basis of generalized Chaplygin-gas models were incompatible with the matter power-spectrum data since they required a much too large amount of pressureless matter, the unified model presented here favors a matter content that is of the order of the baryonic matter abundance suggested by big-bang nucleosynthesis.

  18. Fluid sampling system

    DOE Patents [OSTI]

    Houck, E.D.

    1994-10-11T23:59:59.000Z

    An fluid sampling system allows sampling of radioactive liquid without spillage. A feed tank is connected to a liquid transfer jet powered by a pumping chamber pressurized by compressed air. The liquid is pumped upwardly into a sampling jet of a venturi design having a lumen with an inlet, an outlet, a constricted middle portion, and a port located above the constricted middle portion. The liquid is passed under pressure through the constricted portion causing its velocity to increase and its pressure to be decreased, thereby preventing liquid from escaping. A septum sealing the port can be pierced by a two pointed hollow needle leading into a sample bottle also sealed by a pierceable septum affixed to one end. The bottle is evacuated by flow through the sample jet, cyclic variation in the sampler jet pressure periodically leaves the evacuated bottle with lower pressure than that of the port, thus causing solution to pass into the bottle. The remaining solution in the system is returned to the feed tank via a holding tank. 4 figs.

  19. Fluid sampling system

    DOE Patents [OSTI]

    Houck, Edward D. (Idaho Falls, ID)

    1994-01-01T23:59:59.000Z

    An fluid sampling system allows sampling of radioactive liquid without spillage. A feed tank is connected to a liquid transfer jet powered by a pumping chamber pressurized by compressed air. The liquid is pumped upwardly into a sampling jet of a venturi design having a lumen with an inlet, an outlet, a constricted middle portion, and a port located above the constricted middle portion. The liquid is passed under pressure through the constricted portion causing its velocity to increase and its pressure to decreased, thereby preventing liquid from escaping. A septum sealing the port can be pierced by a two pointed hollow needle leading into a sample bottle also sealed by a pierceable septum affixed to one end. The bottle is evacuated by flow through the sample jet, cyclic variation in the sampler jet pressure periodically leaves the evacuated bottle with lower pressure than that of the port, thus causing solution to pass into the bottle. The remaining solution in the system is returned to the feed tank via a holding tank.

  20. Tracing Geothermal Fluids

    SciTech Connect (OSTI)

    Michael C. Adams; Greg Nash

    2004-03-01T23:59:59.000Z

    Geothermal water must be injected back into the reservoir after it has been used for power production. Injection is critical in maximizing the power production and lifetime of the reservoir. To use injectate effectively the direction and velocity of the injected water must be known or inferred. This information can be obtained by using chemical tracers to track the subsurface flow paths of the injected fluid. Tracers are chemical compounds that are added to the water as it is injected back into the reservoir. The hot production water is monitored for the presence of this tracer using the most sensitive analytic methods that are economically feasible. The amount and concentration pattern of the tracer revealed by this monitoring can be used to evaluate how effective the injection strategy is. However, the tracers must have properties that suite the environment that they will be used in. This requires careful consideration and testing of the tracer properties. In previous and parallel investigations we have developed tracers that are suitable from tracing liquid water. In this investigation, we developed tracers that can be used for steam and mixed water/steam environments. This work will improve the efficiency of injection management in geothermal fields, lowering the cost of energy production and increasing the power output of these systems.

  1. Standardization of Thermo-Fluid Modeling in Modelica.Fluid

    SciTech Connect (OSTI)

    Franke, Rudiger; Casella, Francesco; Sielemann, Michael; Proelss, Katrin; Otter, Martin; Wetter, Michael

    2009-09-01T23:59:59.000Z

    This article discusses the Modelica.Fluid library that has been included in the Modelica Standard Library 3.1. Modelica.Fluid provides interfaces and basic components for the device-oriented modeling of onedimensional thermo-fluid flow in networks containing vessels, pipes, fluid machines, valves and fittings. A unique feature of Modelica.Fluid is that the component equations and the media models as well as pressure loss and heat transfer correlations are decoupled from each other. All components are implemented such that they can be used for media from the Modelica.Media library. This means that an incompressible or compressible medium, a single or a multiple substance medium with one or more phases might be used with one and the same model as long as the modeling assumptions made hold. Furthermore, trace substances are supported. Modeling assumptions can be configured globally in an outer System object. This covers in particular the initialization, uni- or bi-directional flow, and dynamic or steady-state formulation of mass, energy, and momentum balance. All assumptions can be locally refined for every component. While Modelica.Fluid contains a reasonable set of component models, the goal of the library is not to provide a comprehensive set of models, but rather to provide interfaces and best practices for the treatment of issues such as connector design and implementation of energy, mass and momentum balances. Applications from various domains are presented.

  2. Insertable fluid flow passage bridgepiece and method

    DOE Patents [OSTI]

    Jones, Daniel O. (Glenville, NV)

    2000-01-01T23:59:59.000Z

    A fluid flow passage bridgepiece for insertion into an open-face fluid flow channel of a fluid flow plate is provided. The bridgepiece provides a sealed passage from a columnar fluid flow manifold to the flow channel, thereby preventing undesirable leakage into and out of the columnar fluid flow manifold. When deployed in the various fluid flow plates that are used in a Proton Exchange Membrane (PEM) fuel cell, bridgepieces of this invention prevent mixing of reactant gases, leakage of coolant or humidification water, and occlusion of the fluid flow channel by gasket material. The invention also provides a fluid flow plate assembly including an insertable bridgepiece, a fluid flow plate adapted for use with an insertable bridgepiece, and a method of manufacturing a fluid flow plate with an insertable fluid flow passage bridgepiece.

  3. Fluid Mixing from Viscous Fingering

    E-Print Network [OSTI]

    Jha, Birendra

    Mixing efficiency at low Reynolds numbers can be enhanced by exploiting hydrodynamic instabilities that induce heterogeneity and disorder in the flow. The unstable displacement of fluids with different viscosities, or ...

  4. Bio-inspired fluid locomotion

    E-Print Network [OSTI]

    Chan, Brian, 1980-

    2009-01-01T23:59:59.000Z

    We have developed several novel methods of locomotion at low Reynolds number, for both Newtonian and non-Newtonian fluids: Robosnails 1 and 2, which operate on a lubrication layer, and the three-link swimmer which moves ...

  5. Rip Cosmology via Inhomogeneous Fluid

    E-Print Network [OSTI]

    V. V. Obukhov; A. V. Timoshkin; E. V Savushkin

    2013-09-18T23:59:59.000Z

    The conditions for the appearance of the Little Rip, Pseudo Rip and Quasi Rip universes in the terms of the parameters in the equation of state of some dark fluid are investigated. Several examples of the Rip cosmologies are investigated.

  6. Graduate Studies Environmental Fluid Mechanics

    E-Print Network [OSTI]

    Jacobs, Laurence J.

    and bridge scour · Wastewater dispersion in coastal waters · Cohesive sediment resuspension · Flood, and modeling research; and develop new technologies and tools that benefit engineering practice in fluid · Atmospheric, surface, and subsurface models · Flood/drought forecasting and management · Decision support

  7. PMC·I'Fl.

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    not limited to: programmed lowering of thermostat settings, placement of timers on hot water heaters, installation of solar hot water systems. installation of efficient...

  8. FL J. Smith, Jr.

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group currentBradleyTableSelling CorpNew 1325.8.Enaineer;/:4,4ct. B. Duillap

  9. Fluid Mechanics IB Lecturer: Dr Natalia Berloff

    E-Print Network [OSTI]

    : hydroelectric power, chemical processing, jet-driven cutting tools · our fluid environment: ozone loss, climate

  10. Pitch-catch only ultrasonic fluid densitometer

    DOE Patents [OSTI]

    Greenwood, Margaret S. (Richland, WA); Harris, Robert V. (Pasco, WA)

    1999-01-01T23:59:59.000Z

    The present invention is an ultrasonic fluid densitometer that uses a material wedge and pitch-catch only ultrasonic transducers for transmitting and receiving ultrasonic signals internally reflected within the material wedge. Density of a fluid is determined by immersing the wedge into the fluid and measuring reflection of ultrasound at the wedge-fluid interface.

  11. Fluid&ParticulateSystems 424514/2010

    E-Print Network [OSTI]

    Zevenhoven, Ron

    cake solids mass/m2, w 3. Ruth equation using dw = (1-)solid dx fluidL p Ku solidK )1( 1 resistance, , with cake porosity : velocity, u layer thickness, L pressure drop, p dynamic viscosity, fluid Finland februari 2014 Unit w: kg/m2 Fluid&ParticulateSystems 424514/2010 Fluid&ParticulateSystems ĹA424514

  12. QUALITATIVE REASONING ABOUT FLUIDS AND MECHANICS

    E-Print Network [OSTI]

    Forbus, Kenneth D.

    which include both me- chanical mechanisms and fluids, such as internal combustion engines and hydraulic

  13. Quercetin 3-O-methyl ether protects FL83B cells from copper induced oxidative stress through the PI3K/Akt and MAPK/Erk pathway

    SciTech Connect (OSTI)

    Tseng, Hsiao-Ling, E-mail: lily1001224@gmail.com [Department of Life Sciences, Tzu Chi University, Hualien, Taiwan (China)] [Department of Life Sciences, Tzu Chi University, Hualien, Taiwan (China); Li, Chia-Jung, E-mail: 97751101@stmail.tcu.edu.tw [Institute of Medical Sciences, Tzu Chi University, Hualien, Taiwan (China)] [Institute of Medical Sciences, Tzu Chi University, Hualien, Taiwan (China); Huang, Lin-Huang, E-mail: yg1236@yahoo.com.tw [School of Medicine, Institute of Traditional Medicine, National Yang-Ming University, Taipei, Taiwan (China)] [School of Medicine, Institute of Traditional Medicine, National Yang-Ming University, Taipei, Taiwan (China); Chen, Chun-Yao, E-mail: cychen@mail.tcu.edu.tw [Department of Life Sciences, Tzu Chi University, Hualien, Taiwan (China)] [Department of Life Sciences, Tzu Chi University, Hualien, Taiwan (China); Tsai, Chun-Hao, E-mail: 100726105@stmail.tcu.edu.tw [Department of Life Sciences, Tzu Chi University, Hualien, Taiwan (China)] [Department of Life Sciences, Tzu Chi University, Hualien, Taiwan (China); Lin, Chun-Nan, E-mail: lincna@cc.kmu.edu.tw [Faculty of Pharmacy, College of Pharmacy, Kaohsiung Medical University, Kaohsiung, Taiwan (China) [Faculty of Pharmacy, College of Pharmacy, Kaohsiung Medical University, Kaohsiung, Taiwan (China); Department of Biological Science and Technology, School of Medicine, China Medical University, Taichung, Taiwan (China); Hsu, Hsue-Yin, E-mail: hsueyin@mail.tcu.edu.tw [Department of Life Sciences, Tzu Chi University, Hualien, Taiwan (China)] [Department of Life Sciences, Tzu Chi University, Hualien, Taiwan (China)

    2012-10-01T23:59:59.000Z

    Quercetin is a bioflavonoid that exhibits several biological functions in vitro and in vivo. Quercetin 3-O-methyl ether (Q3) is a natural product reported to have pharmaceutical activities, including antioxidative and anticancer activities. However, little is known about the mechanism by which it protects cells from oxidative stress. This study was designed to investigate the mechanisms by which Q3 protects against Cu{sup 2+}-induced cytotoxicity. Exposure to Cu{sup 2+} resulted in the death of mouse liver FL83B cells, characterized by apparent apoptotic features, including DNA fragmentation and increased nuclear condensation. Q3 markedly suppressed Cu{sup 2+}-induced apoptosis and mitochondrial dysfunction, characterized by reduced mitochondrial membrane potential, caspase-3 activation, and PARP cleavage, in Cu{sup 2+}-exposed cells. The involvement of PI3K, Akt, Erk, FOXO3A, and Mn-superoxide dismutase (MnSOD) was shown to be critical to the survival of Q3-treated FL83B cells. The liver of both larval and adult zebrafish showed severe damage after exposure to Cu{sup 2+} at a concentration of 5 ?M. Hepatic damage induced by Cu{sup 2+} was reduced by cotreatment with Q3. Survival of Cu{sup 2+}-exposed larval zebrafish was significantly increased by cotreatment with 15 ?M Q3. Our results indicated that Cu{sup 2+}-induced apoptosis in FL83B cells occurred via the generation of ROS, upregulation and phosphorylation of Erk, overexpression of 14-3-3, inactivation of Akt, and the downregulation of FOXO3A and MnSOD. Hence, these results also demonstrated that Q3 plays a protective role against oxidative damage in zebrafish liver and remarked the potential of Q3 to be used as an antioxidant for hepatocytes. Highlights: ? Protective effects of Q3 on Cu{sup 2+}-induced oxidative stress in vitro and in vivo. ? Cu{sup 2+} induced apoptosis in FL83B cells via ROS and the activation of Erk. ? Q3 abolishes Cu{sup 2+}-induced apoptosis through the PI3K/Akt and MAPK/Erk pathway.

  14. Fluid&ParticulateSystems 424514/2010

    E-Print Network [OSTI]

    Zevenhoven, Ron

    fluidr L wDdrag v˝bL Lv dxbFF 331 0 . Picture: BMH99 PTG #12;Fluid&ParticulateSystems 424514/2010 Fluid/2010 Fluid&ParticulateSystems ĹA424514/2014 Basic concept wFAw A F VpVpP losscs cs loss losspumppump carlosscar wFP 212121 ,0, ppwwzz F w wFP #12;Fluid&ParticulateSystems 424514/2010 Fluid

  15. Fluid observers and tilting cosmology

    E-Print Network [OSTI]

    A. A. Coley; S. Hervik; W. C. Lim

    2006-05-24T23:59:59.000Z

    We study perfect fluid cosmological models with a constant equation of state parameter $\\gamma$ in which there are two naturally defined time-like congruences, a geometrically defined geodesic congruence and a non-geodesic fluid congruence. We establish an appropriate set of boost formulae relating the physical variables, and consequently the observed quantities, in the two frames. We study expanding spatially homogeneous tilted perfect fluid models, with an emphasis on future evolution with extreme tilt. We show that for ultra-radiative equations of state (i.e., $\\gamma>4/3$), generically the tilt becomes extreme at late times and the fluid observers will reach infinite expansion within a finite proper time and experience a singularity similar to that of the big rip. In addition, we show that for sub-radiative equations of state (i.e., $\\gamma < 4/3$), the tilt can become extreme at late times and give rise to an effective quintessential equation of state. To establish the connection with phantom cosmology and quintessence, we calculate the effective equation of state in the models under consideration and we determine the future asymptotic behaviour of the tilting models in the fluid frame variables using the boost formulae. We also discuss spatially inhomogeneous models and tilting spatially homogeneous models with a cosmological constant.

  16. Maxwell's fluid model of magnetism

    E-Print Network [OSTI]

    Robert Brady; Ross Anderson

    2015-02-20T23:59:59.000Z

    In 1861, Maxwell derived two of his equations of electromagnetism by modelling a magnetic line of force as a `molecular vortex' in a fluid-like medium. Later, in 1980, Berry and colleagues conducted experiments on a `phase vortex', a wave geometry in a fluid which is analogous to a magnetic line of force and also exhibits behaviour corresponding to the quantisation of magnetic flux. Here we unify these approaches by writing down a solution to the equations of motion for a compressible fluid which behaves in the same way as a magnetic line of force. We then revisit Maxwell's historical inspiration, namely Faraday's 1846 model of light as disturbances in lines of force. Using our unified model, we show that such disturbances resemble photons: they are polarised, absorbed discretely, obey Maxwell's full equations of electromagnetism to first order, and quantitatively reproduce the correlation that is observed in the Bell tests.

  17. Non-Newtonian fluid flow

    E-Print Network [OSTI]

    Osinski, Charles Anthony

    1963-01-01T23:59:59.000Z

    zero and unity. The Ostwald- de Waele Equation (4), commonly known as the power law, is sometimes used to describe fluid behavior of this type. The rheological equation is (4) where the parameters "k" and "n" are constant for a particular fluid... be extended to include Reynolds numbers and the type of flow determined to be laminar and/or turbulent. It is assumed that the transition from laminar to turbulent flow occurs at a Reynolds number of 2100, the numeric distribution of Reynolds numbers...

  18. Viscosity of a nucleonic fluid

    E-Print Network [OSTI]

    Aram Z. Mekjian

    2012-03-21T23:59:59.000Z

    The viscosity of nucleonic matter is studied both classically and in a quantum mechanical description. The collisions between particles are modeled as hard sphere scattering as a baseline for comparison and as scattering from an attractive square well potential. Properties associated with the unitary limit are developed which are shown to be approximately realized for a system of neutrons. The issue of near perfect fluid behavior of neutron matter is remarked on. Using some results from hard sphere molecular dynamics studies near perfect fluid behavior is discussed further.

  19. DECOUPLED TIME STEPPING METHODS FOR FLUID-FLUID INTERACTION

    E-Print Network [OSTI]

    Kasman, Alex

    -fluid interaction, atmosphere-ocean, implicit-explicit method. 1. Introduction. The dynamic core in atmosphere-ocean to the coupled system using only (uncoupled) atmosphere and ocean solves, (see e.g. [4, 6, 17, 18, 19 their shared interface I by a rigid-lid coupling condition, i.e. no penetration and a slip with friction

  20. Compressor bleed cooling fluid feed system

    DOE Patents [OSTI]

    Donahoo, Eric E; Ross, Christopher W

    2014-11-25T23:59:59.000Z

    A compressor bleed cooling fluid feed system for a turbine engine for directing cooling fluids from a compressor to a turbine airfoil cooling system to supply cooling fluids to one or more airfoils of a rotor assembly is disclosed. The compressor bleed cooling fluid feed system may enable cooling fluids to be exhausted from a compressor exhaust plenum through a downstream compressor bleed collection chamber and into the turbine airfoil cooling system. As such, the suction created in the compressor exhaust plenum mitigates boundary layer growth along the inner surface while providing flow of cooling fluids to the turbine airfoils.

  1. Visually simulating realistic fluid motion

    E-Print Network [OSTI]

    Naithani, Priyanka

    2002-01-01T23:59:59.000Z

    's second law of motion and Conservation of Mass, which leads to the continuity equation. Newton's second law states that the total force F, acting on an element equals mass m times the element's acceleration a. In the case of fluids we do not consider...

  2. Directed flow fluid rinse trough

    DOE Patents [OSTI]

    Kempka, S.N.; Walters, R.N.

    1996-07-02T23:59:59.000Z

    Novel rinse troughs accomplish thorough uniform rinsing. The tanks are suitable for one or more essentially planar items having substantially the same shape. The troughs ensure that each surface is rinsed uniformly. The new troughs also require less rinse fluid to accomplish a thorough rinse than prior art troughs. 9 figs.

  3. Quantifying the stimuli of photorheological fluids

    E-Print Network [OSTI]

    Bates, Sarah Woodring

    2010-01-01T23:59:59.000Z

    We develop a model to predict the dynamics of photorheological fluids and, more generally, photoresponsive fluids for monochromatic and polychromatic light sources. Derived from first principles, the model relates the ...

  4. Fluid Flow Simulation in Fractured Reservoirs

    E-Print Network [OSTI]

    Sarkar, Sudipta

    2002-01-01T23:59:59.000Z

    The purpose of this study is to analyze fluid flow in fractured reservoirs. In most petroleum reservoirs, particularly carbonate reservoirs and some tight sands, natural fractures play a critical role in controlling fluid ...

  5. Fluid Gravity Engineering Rocket motor flow analysis

    E-Print Network [OSTI]

    Anand, Mahesh

    Fluid Gravity Engineering Capability · Rocket motor flow analysis -Internal (performance) -External (plume / contamination) · Effect on landing site (surface alteration) -In-depth flow through porous young scientists/engineers Fluid Gravity Engineering Ltd #12;

  6. Fluid&ParticulateSystems 424514/2010

    E-Print Network [OSTI]

    Zevenhoven, Ron

    size distribution (CSD) and quality #12;Fluid&ParticulateSystems 424514/2010 Fluid solution ­ Selective distribution of impurities between a liquid phase and a solid phase uniformity, purity

  7. Fluid sampling system for a nuclear reactor

    DOE Patents [OSTI]

    Lau, Louis K. (Monroeville, PA); Alper, Naum I. (Monroeville, PA)

    1994-01-01T23:59:59.000Z

    A system of extracting fluid samples, either liquid or gas, from the interior of a nuclear reactor containment utilizes a jet pump. To extract the sample fluid, a nonradioactive motive fluid is forced through the inlet and discharge ports of a jet pump located outside the containment, creating a suction that draws the sample fluid from the containment through a sample conduit connected to the pump suction port. The mixture of motive fluid and sample fluid is discharged through a return conduit to the interior of the containment. The jet pump and means for removing a portion of the sample fluid from the sample conduit can be located in a shielded sample grab station located next to the containment. A non-nuclear grade active pump can be located outside the grab sampling station and the containment to pump the nonradioactive motive fluid through the jet pump.

  8. Fluid sampling system for a nuclear reactor

    DOE Patents [OSTI]

    Lau, L.K.; Alper, N.I.

    1994-11-22T23:59:59.000Z

    A system of extracting fluid samples, either liquid or gas, from the interior of a nuclear reactor containment utilizes a jet pump. To extract the sample fluid, a nonradioactive motive fluid is forced through the inlet and discharge ports of a jet pump located outside the containment, creating a suction that draws the sample fluid from the containment through a sample conduit connected to the pump suction port. The mixture of motive fluid and sample fluid is discharged through a return conduit to the interior of the containment. The jet pump and means for removing a portion of the sample fluid from the sample conduit can be located in a shielded sample grab station located next to the containment. A non-nuclear grade active pump can be located outside the grab sampling station and the containment to pump the nonradioactive motive fluid through the jet pump. 1 fig.

  9. Heat Transfer in Complex Fluids

    SciTech Connect (OSTI)

    Mehrdad Massoudi

    2012-01-01T23:59:59.000Z

    Amongst the most important constitutive relations in Mechanics, when characterizing the behavior of complex materials, one can identify the stress tensor T, the heat flux vector q (related to heat conduction) and the radiant heating (related to the radiation term in the energy equation). Of course, the expression 'complex materials' is not new. In fact, at least since the publication of the paper by Rivlin & Ericksen (1955), who discussed fluids of complexity (Truesdell & Noll, 1992), to the recently published books (Deshpande et al., 2010), the term complex fluids refers in general to fluid-like materials whose response, namely the stress tensor, is 'non-linear' in some fashion. This non-linearity can manifest itself in variety of forms such as memory effects, yield stress, creep or relaxation, normal-stress differences, etc. The emphasis in this chapter, while focusing on the constitutive modeling of complex fluids, is on granular materials (such as coal) and non-linear fluids (such as coal-slurries). One of the main areas of interest in energy related processes, such as power plants, atomization, alternative fuels, etc., is the use of slurries, specifically coal-water or coal-oil slurries, as the primary fuel. Some studies indicate that the viscosity of coal-water mixtures depends not only on the volume fraction of solids, and the mean size and the size distribution of the coal, but also on the shear rate, since the slurry behaves as shear-rate dependent fluid. There are also studies which indicate that preheating the fuel results in better performance, and as a result of such heating, the viscosity changes. Constitutive modeling of these non-linear fluids, commonly referred to as non-Newtonian fluids, has received much attention. Most of the naturally occurring and synthetic fluids are non-linear fluids, for example, polymer melts, suspensions, blood, coal-water slurries, drilling fluids, mud, etc. It should be noted that sometimes these fluids show Newtonian (linear) behavior for a given range of parameters or geometries; there are many empirical or semi-empirical constitutive equations suggested for these fluids. There have also been many non-linear constitutive relations which have been derived based on the techniques of continuum mechanics. The non-linearities oftentimes appear due to higher gradient terms or time derivatives. When thermal and or chemical effects are also important, the (coupled) momentum and energy equations can give rise to a variety of interesting problems, such as instability, for example the phenomenon of double-diffusive convection in a fluid layer. In Conclusion, we have studied the flow of a compressible (density gradient type) non-linear fluid down an inclined plane, subject to radiation boundary condition. The heat transfer is also considered where a source term, similar to the Arrhenius type reaction, is included. The non-dimensional forms of the equations are solved numerically and the competing effects of conduction, dissipation, heat generation and radiation are discussed. It is observed that the velocity increases rapidly in the region near the inclined surface and is slower in the region near the free surface. Since R{sub 7} is a measure of the heat generation due to chemical reaction, when the reaction is frozen (R{sub 7}=0.0) the temperature distributions would depend only on R{sub 1}, and R{sub 2}, representing the effects of the pressure force developed in the material due to the distribution, R{sub 3} and R{sub 4} viscous dissipation, R{sub 5} the normal stress coefficient, R{sub 6} the measure of the emissivity of the particles to the thermal conductivity, etc. When the flow is not frozen (RP{sub 7} > 0) the temperature inside the flow domain is much higher than those at the inclined and free surfaces. As a result, heat is transferred away from the flow toward both the inclined surface and the free surface with a rate that increases as R{sub 7} increases. For a given temperature, an increase in {zeta} implies that the activation energy is smaller and thus, the reaction ra

  10. Ultrasonic fluid densitometer for process control

    DOE Patents [OSTI]

    Greenwood, Margaret S. (Richland, WA)

    2000-01-01T23:59:59.000Z

    The present invention is an ultrasonic fluid densitometer that uses at least one pair of transducers for transmitting and receiving ultrasonic signals internally reflected within a material wedge. A temperature sensor is provided to monitor the temperature of the wedge material. Density of a fluid is determined by immersing the wedge into the fluid and measuring reflection of ultrasound at the wedge-fluid interface and comparing a transducer voltage and wedge material temperature to a tabulation as a function of density.

  11. Fluid Construction Grammar on Real Robots

    E-Print Network [OSTI]

    Steels, Luc

    Chapter 10 Fluid Construction Grammar on Real Robots Luc Steels1,2, Joachim De Beule3, and Pieter and P. Wellens (2012). Fluid Construction Grammar on Real Robots. In Luc Steels and Manfred Hild (Eds game experiments reported in this book. This framework is called Fluid Construction Grammar (FCG

  12. Fluid&ParticulateSystems 424514/2010

    E-Print Network [OSTI]

    Zevenhoven, Ron

    .zevenhoven@abo.fi 2Fluid&ParticulateSystems 424514/2010 Fluid&ParticulateSystems ĹA424514/2014 2.1 Flow tube sections / Turku Finland RoNz 3 Fluid Flow in Tube Systems loss 2 2 1 pump 2 2 1 ppwzgppwzg outoutoutoutininininloss,311 ' 3 ppzgp 2loss,322 ' 3 ppzgp 210 VVV For a fully developed turbulent flow (horizontal

  13. Harmonic Fluids Changxi Zheng Doug L. James

    E-Print Network [OSTI]

    Columbia University

    Harmonic Fluids Changxi Zheng Doug L. James Cornell University Abstract Fluid sounds- ing. Furthermore, while offline applications can rely on talented foley artists to "cook up" plausible for vortex-based fluid sounds [Dobashi et al. 2003] and solid bodies [O'Brien et al. 2001; James et al. 2006

  14. SEISMIC MONITORING OF CARBON DIOXIDE FLUID FLOW

    E-Print Network [OSTI]

    Santos, Juan

    SEISMIC MONITORING OF CARBON DIOXIDE FLUID FLOW J. E. Santos1, G. B. Savioli2, J. M. Carcione3, D´e, Argentina SEISMIC MONITORING OF CARBON DIOXIDE FLUID FLOW ­ p. #12;Introduction. I Storage of CO2). SEISMIC MONITORING OF CARBON DIOXIDE FLUID FLOW ­ p. #12;Introduction. II CO2 is separated from natural

  15. Introduction to Computational Fluid Dynamics 424512 E #1 -rz Introduction to Computational Fluid Dynamics

    E-Print Network [OSTI]

    Zevenhoven, Ron

    Introduction to Computational Fluid Dynamics 424512 E #1 - rz Introduction to Computational Fluid Dynamics (iCFD) 424512.0 E, 5 sp / 3 sw 1. Introduction; Fluid dynamics (lecture 1 of 5) Ron Zevenhoven Ă?bo to Computational Fluid Dynamics 424512 E #1 - rz april 2013 Ă?bo Akademi Univ - Thermal and Flow Engineering

  16. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS Int. J. Numer. Meth. Fluids 2011; 00:123

    E-Print Network [OSTI]

    Buscaglia, Gustavo C.

    , magma chambers, fluid­fuel interactions, crude oil recovery, spray cans, sediment transport in riversINTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS Int. J. Numer. Meth. Fluids 2011; 00 for the treatment of discontinuous pressures in multi­fluid flows Roberto F. Ausas1 , Gustavo C. Buscaglia1

  17. An FDTD Method for Analysis of Scattering from Rough FluidFluid Interfaces

    E-Print Network [OSTI]

    Schneider, John B.

    results are presented for fluid­fluid cases modeling water­sediment inter­ faces. Two different roughness speeds in shallow­water sediment bottoms are relatively slow, a fluid­ fluid model is a reasonable to the interface, and a correc­ tion for the numerical dispersion inherent to the FDTD algorithm. Numeri­ cal

  18. A. Kusiak, Data Mining and Decision Making, in B.V. Dasarathy (Ed.), Proceedings of the SPIE Conference on Data Mining and Knowledge Discovery: Theory, Tools, and Technology IV, Vol. 4730, SPIE, Orlando, FL, April 2002, pp. 155-165.

    E-Print Network [OSTI]

    Kusiak, Andrew

    A. Kusiak, Data Mining and Decision Making, in B.V. Dasarathy (Ed.), Proceedings of the SPIE Conference on Data Mining and Knowledge Discovery: Theory, Tools, and Technology IV, Vol. 4730, SPIE, Orlando, FL, April 2002, pp. 155-165. Data Mining and Decision Making Andrew Kusiak Department of Mechanical

  19. Panel: Microgrid Research and Field Testing IEEE PES General Meeting, 24-28 June 2007, Tampa, FL 1 In general, a microgrid can operate in both the grid-connected

    E-Print Network [OSTI]

    Panel: Microgrid Research and Field Testing IEEE PES General Meeting, 24-28 June 2007, Tampa, FL 1 Abstract In general, a microgrid can operate in both the grid-connected mode and the islanded mode where the microgrid is interfaced to the main power system by a fast semiconductor switch called static switch, (SS

  20. JOURNAL DE PHYSIQUE Colloque C6, supplkment au no 12, Tome 37, DPcembre 1976,page C6-897 M~SSBAUERSTUDIES OF' lZ9IATOMS IMPLANTED IN a-AND fl-TIN

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    ~SSBAUERSTUDIES OF' lZ9IATOMS IMPLANTED IN a- AND fl-TIN H. DE WAARD and G. J. KEMERINK Laboratorium voor Algemene on the basis of a simple model. Implants of 1291 in /3 tin yield two line spectra identicalto those found for implants in a tin converted to /3 tin by heating. Repeated phase transitions show that the impurity

  1. Greitzer, F.L. April 2000. "Life Extension Analysis and Prognostics Architectures," Laboratory Directed Research and Development Annual Report, Fiscal Year 1999, pp. 85-88. PNNL-13203. U.S. Department of Energy. Richland, Washington.

    E-Print Network [OSTI]

    of Energy. Richland, Washington. Life-Extension Analysis and Prognostics Architectures Frank L. GreitzerGreitzer, F.L. April 2000. "Life Extension Analysis and Prognostics Architectures," Laboratory that perform sensor fusion, analysis, reporting and interpreting of results with little or no human

  2. Fluid dynamics on sieve trays

    SciTech Connect (OSTI)

    Hag, M.A.

    1982-08-01T23:59:59.000Z

    A study was conducted to investigate the effects of fluid properties on the hydrodynamics of sieve tray columns. The study showed that changes in liquid viscosity influenced froth height, while changes in liquid surface tension and density influenced total pressure drop across the trays. Liquid holdup was independent of these solution properties. The liquid systems used for the study were: water/glycerol for viscosity, water/ethanol for surface tension and methanol/chloroform for density.

  3. Hydrostatic bearings for a turbine fluid flow metering device

    DOE Patents [OSTI]

    Fincke, James R. (Rigby, ID)

    1982-01-01T23:59:59.000Z

    A rotor assembly fluid metering device has been improved by development of a hydrostatic bearing fluid system which provides bearing fluid at a common pressure to rotor assembly bearing surfaces. The bearing fluid distribution system produces a uniform film of fluid between bearing surfaces and allows rapid replacement of bearing fluid between bearing surfaces, thereby minimizing bearing wear and corrosion.

  4. Hydrostatic bearings for a turbine fluid flow metering device

    DOE Patents [OSTI]

    Fincke, J.R.

    1982-05-04T23:59:59.000Z

    A rotor assembly fluid metering device has been improved by development of a hydrostatic bearing fluid system which provides bearing fluid at a common pressure to rotor assembly bearing surfaces. The bearing fluid distribution system produces a uniform film of fluid between bearing surfaces and allows rapid replacement of bearing fluid between bearing surfaces, thereby minimizing bearing wear and corrosion. 3 figs.

  5. Locomotion in complex fluids: Integral theorems

    E-Print Network [OSTI]

    Eric Lauga

    2014-10-15T23:59:59.000Z

    The biological fluids encountered by self-propelled cells display complex microstructures and rheology. We consider here the general problem of low-Reynolds number locomotion in a complex fluid. {Building on classical work on the transport of particles in viscoelastic fluids,} we demonstrate how to mathematically derive three integral theorems relating the arbitrary motion of an isolated organism to its swimming kinematics {in a non-Newtonian fluid}. These theorems correspond to three situations of interest, namely (1) squirming motion in a linear viscoelastic fluid, (2) arbitrary surface deformation in a weakly non-Newtonian fluid, and (3) small-amplitude deformation in an arbitrarily non-Newtonian fluid. Our final results, valid for a wide-class of {swimmer geometry,} surface kinematics and constitutive models, at most require mathematical knowledge of a series of Newtonian flow problems, and will be useful to quantity the locomotion of biological and synthetic swimmers in complex environments.

  6. Multiple source/multiple target fluid transfer apparatus

    DOE Patents [OSTI]

    Turner, Terry D. (Idaho Falls, ID)

    1997-01-01T23:59:59.000Z

    A fluid transfer apparatus includes: a) a plurality of orifices for connection with fluid sources; b) a plurality of orifices for connection with fluid targets; c) a set of fluid source conduits and fluid target conduits associated with the orifices; d) a pump fluidically interposed between the source and target conduits to transfer fluid therebetween; e) a purge gas conduit in fluid communication with the fluid source conduits, fluid target conduits and pump to receive and pass a purge gas under pressure; f) a solvent conduit in fluid communication with the fluid source conduits, fluid target conduits and pump to receive and pass solvent, the solvent conduit including a solvent valve; g) pump control means for controlling operation of the pump; h) purge gas valve control means for controlling operation of the purge gas valve to selectively impart flow of purge gas to the fluid source conduits, fluid target conduits and pump; i) solvent valve control means for controlling operation of the solvent valve to selectively impart flow of solvent to the fluid source conduits, fluid target conduits and pump; and j) source and target valve control means for controlling operation of the fluid source conduit valves and the fluid target conduit valves to selectively impart passage of fluid between a selected one of the fluid source conduits and a selected one of the fluid target conduits through the pump and to enable passage of solvent or purge gas through selected fluid source conduits and selected fluid target conduits.

  7. Immersible solar heater for fluids

    DOE Patents [OSTI]

    Kronberg, James W. (Aiken, SC)

    1995-01-01T23:59:59.000Z

    An immersible solar heater comprising a light-absorbing panel attached to a frame for absorbing heat energy from the light and transferring the absorbed heat energy directly to the fluid in which the heater is immersed. The heater can be used to heat a swimming pool, for example, and is held in position and at a preselected angle by a system of floats, weights and tethers so that the panel can operate efficiently. A skid can be used in one embodiment to prevent lateral movement of the heater along the bottom of the pool. Alternative embodiments include different arrangements of the weights, floats and tethers and methods for making the heater.

  8. Fluid cooled vehicle drive module

    DOE Patents [OSTI]

    Beihoff, Bruce C.; Radosevich, Lawrence D.; Meyer, Andreas A.; Gollhardt, Neil; Kannenberg, Daniel G.

    2005-11-15T23:59:59.000Z

    An electric vehicle drive includes a support may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support. The support, in conjunction with other packaging features may form a shield from both external EM/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as improved terminal configurations. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

  9. Fluid Imaging | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdf Jump to:ar-80m.pdfFillmoreGabbs Valley Area (DOEARRA Funded Projects for Fluid

  10. System and method for filling a plurality of isolated vehicle fluid circuits through a common fluid fill port

    SciTech Connect (OSTI)

    Sullivan, Scott C; Fansler, Douglas

    2014-10-14T23:59:59.000Z

    A vehicle having multiple isolated fluid circuits configured to be filled through a common fill port includes a first fluid circuit disposed within the vehicle, the first fluid circuit having a first fill port, a second fluid circuit disposed within the vehicle, and a conduit defining a fluid passageway between the first fluid circuit and second fluid circuit, the conduit including a valve. The valve is configured such that the first and second fluid circuits are fluidly coupled via the passageway when the valve is open, and are fluidly isolated when the valve is closed.

  11. Supercritical fluid thermodynamics for coal processing

    SciTech Connect (OSTI)

    van Swol, F. (Illinois Univ., Urbana, IL (United States). Dept. of Chemical Engineering); Eckert, C.A. (Georgia Inst. of Tech., Atlanta, GA (United States). School of Chemical Engineering)

    1988-09-15T23:59:59.000Z

    The main objective of this research is to develop an equation of state that can be used to predict solubilities and tailor supercritical fluid solvents for the extraction and processing of coal. To meet this objective we have implemented a two-sided. approach. First, we expanded the database of model coal compound solubilities in higher temperature fluids, polar fluids, and fluid mixtures systems. Second, the unique solute/solute, solute/cosolvent and solute/solvent intermolecular interactions in supercritical fluid solutions were investigated using spectroscopic techniques. These results increased our understanding of the molecular phenomena that affect solubility in supercritical fluids and were significant in the development of an equation of state that accurately reflects the true molecular makeup of the solution. (VC)

  12. On the equivalence of nonadiabatic fluids

    E-Print Network [OSTI]

    W. Barreto

    2010-11-17T23:59:59.000Z

    Here we show how an anisotropic fluid in the diffusion limit can be equivalent to an isotropic fluid in the streaming out limit, in spherical symmetry. For a particular equation of state this equivalence is total, from one fluid we can obtain the other and vice versa. A numerical master model is presented, based on a generic equation of state, in which only quantitative differences are displayed between both nonadiabatic fluids. From a deeper view, other difference between fluids is shown as an asymmetry that can be overcome if we consider the appropriate initial-boundary conditions. Equivalence in this context can be considered as a first order method of approximation to study dissipative fluids.

  13. Split driveshaft pump for hazardous fluids

    DOE Patents [OSTI]

    Evans, II, Thomas P. (Aiken, SC); Purohit, Jwalit J. (Evans, GA); Fazio, John M. (Orchard Park, NY)

    1995-01-01T23:59:59.000Z

    A pump having a split driveshaft for use in pumping hazardous fluids wherein only one driveshaft becomes contaminated by the fluid while the second remains isolated from the fluid. The pump has a first portion and a second portion. The first portion contains a pump motor, the first driveshaft, a support pedestal, and vapor barriers and seals. The second portion contains a second, self-lubricating driveshaft and an impeller. The first and second driveshafts are connected together by a releasable coupling. A shield and a slinger deployed below the coupling prevent fluid from the second portion from reaching the first portion. In operation, only the second assembly comes into contact with the fluid being pumped, so the risk of contamination of the first portion by the hazardous fluid is reduced. The first assembly can be removed for repairs or routine maintenance by decoupling the first and second driveshafts and disconnecting the motor from the casing.

  14. Drill-in fluids control formation damage

    SciTech Connect (OSTI)

    Halliday, W.S. (Baker Hughes Inteq, Houston, TX (United States))

    1994-12-01T23:59:59.000Z

    Several factors led to development, oil company interest in, and use of payzone drilling fluids, including operator concern about maximizing well production, increasing acceptance of horizontal drilling and openhole completion popularity. This article discusses water-base drill-in'' fluid systems and applications. Payzone damage, including fine solids migration, clay swelling and solids invasion, reduces effective formation permeability, which results in lower production rates. Formation damage is often caused by invasion of normal drilling fluids that contain barite or bentonite. Drill-in systems are designed with special bridging agents to minimize invasion. Several bridging materials designed to form effective filter cake for instantaneous leak-off control can be used. Bridging materials are also designed to minimize stages and time required to clean up wells before production. Fluids with easy-to-remove bridging agents reduce completion costs. Drill-in fluid bridging particles can often be removed more thoroughly than those in standard fluids.

  15. Hydrostatic bearings for a turbine fluid flow metering device

    DOE Patents [OSTI]

    Fincke, J.R.

    1980-05-02T23:59:59.000Z

    A rotor assembly fluid metering device has been improved by development of a hydrostatic bearing fluid system which provides bearing fluid at a common pressure to rotor assembly bearing surfaces. The bearing fluid distribution system produces a uniform film of fluid distribution system produces a uniform film of fluid between bearing surfaces and allows rapid replacement of bearing fluid between bearing surfaces, thereby minimizing bearing wear and corrosion.

  16. Fluid control structures in microfluidic devices

    DOE Patents [OSTI]

    Mathies, Richard A. (Moraga, CA); Grover, William H. (Berkeley, CA); Skelley, Alison (Berkeley, CA); Lagally, Eric (Oakland, CA); Liu, Chung N. (Albany, CA)

    2008-11-04T23:59:59.000Z

    Methods and apparatus for implementing microfluidic analysis devices are provided. A monolithic elastomer membrane associated with an integrated pneumatic manifold allows the placement and actuation of a variety of fluid control structures, such as structures for pumping, isolating, mixing, routing, merging, splitting, preparing, and storing volumes of fluid. The fluid control structures can be used to implement a variety of sample introduction, preparation, processing, and storage techniques.

  17. Metaphoric optical computing of fluid dynamics

    E-Print Network [OSTI]

    Tsang, M; Tsang, Mankei; Psaltis, Demetri

    2006-01-01T23:59:59.000Z

    We present theoretical and numerical evidence to show that self-defocusing nonlinear optical propagation can be used to compute Euler fluid dynamics and possibly Navier-Stokes fluid dynamics. In particular, the formation of twin vortices and the K\\'arm\\'an vortex street behind an obstacle, two well-known viscous fluid phenomena, is numerically demonstrated using the nonlinear Schr\\"odinger equation.

  18. Critical phenomena in perfect fluids

    E-Print Network [OSTI]

    David W. Neilsen; Matthew W. Choptuik

    1999-04-18T23:59:59.000Z

    We investigate the gravitational collapse of a spherically symmetric, perfect fluid with equation of state P = (Gamma -1)rho. We restrict attention to the ultrarelativistic (``kinetic-energy-dominated'', ``scale-free'') limit where black hole formation is anticipated to turn on at infinitesimal black hole mass (Type II behavior). Critical solutions (those which sit at the threshold of black hole formation in parametrized families of collapse) are found by solving the system of ODEs which result from a self-similar ansatz, and by solving the full Einstein/fluid PDEs in spherical symmetry. These latter PDE solutions (``simulations'') extend the pioneering work of Evans and Coleman (Gamma = 4/3) and verify that the continuously self-similar solutions previously found by Maison and Hara et al for $1.05 Gamma_dn are nodal points rather than focal points as previously reported. We also find a critical solution for Gamma = 2, and present evidence that it is continuously self-similar and Type II. Mass-scaling exponents for all of the critical solutions are calculated by evolving near-critical initial data, with results which confirm and extend previous calculations based on linear perturbation theory. Finally, we comment on critical solutions generated with an ideal-gas equation of state.

  19. Process for retarding fluid flow

    SciTech Connect (OSTI)

    Sandford, B.B.; Zillmer, R.C.

    1989-01-10T23:59:59.000Z

    A process is described for retarding the flow of fluid in a subterranean formation, comprising: (a) introducing an effective amount of a gel-forming composition into a subterranean formation, the gel-forming composition being operable when gelled in the formation for retarding the flow of fluid therein. The gel-forming composition consists of: i. a first substance dissolved in water to form an aqueous solution, the first substance being selected from the group consisting of polyvivyl alcohols, and mixtures thereof, wherein the gel-forming composition contains an amount of the first substance of from about 0.5 to about 5 weight percent of the gel-forming composition, and ii. an effective amount of glutaraldehyde which is operable for forming a weakly acidic condition having a pH from about 5.5 to less than 7 in the gel-forming composition and also operable for promoting crosslinking of the first substance and glutaraldehyde and for forming a gel from the gel-forming composition under the weakly acidic condition within a period of time no greater than about 5 days without adding an acidic catalyst to the gel-forming composition to lower the pH of the gel-forming composition below about 5.5.

  20. SEISMIC MONITORING OF CARBON DIOXIDE FLUID FLOW

    E-Print Network [OSTI]

    santos

    SEISMIC MONITORING OF. CARBON DIOXIDE FLUID FLOW. J. E. Santos. 1. , G. B. Savioli. 2. , J. M. Carcione. 3. , D. Gei. 3. 1. CONICET, IGPUBA, Fac.

  1. Solution generating theorems for perfect fluid spheres

    E-Print Network [OSTI]

    Petarpa Boonserm; Matt Visser; Silke Weinfurtner

    2006-09-20T23:59:59.000Z

    The first static spherically symmetric perfect fluid solution with constant density was found by Schwarzschild in 1918. Generically, perfect fluid spheres are interesting because they are first approximations to any attempt at building a realistic model for a general relativistic star. Over the past 90 years a confusing tangle of specific perfect fluid spheres has been discovered, with most of these examples seemingly independent from each other. To bring some order to this collection, we develop several new transformation theorems that map perfect fluid spheres into perfect fluid spheres. These transformation theorems sometimes lead to unexpected connections between previously known perfect fluid spheres, sometimes lead to new previously unknown perfect fluid spheres, and in general can be used to develop a systematic way of classifying the set of all perfect fluid spheres. In addition, we develop new ``solution generating'' theorems for the TOV, whereby any given solution can be ``deformed'' to a new solution. Because these TOV-based theorems work directly in terms of the pressure profile and density profile it is relatively easy to impose regularity conditions at the centre of the fluid sphere.

  2. Coupled atomistic-continuum methods for fluids

    E-Print Network [OSTI]

    I will discuss the coupling scheme, its application to polymer fluids, and the major difficulties in implementations. In the second part of the talk, I will discuss the ...

  3. DISPLAYING AND INTERPRETING FLUID INCLUSION STRATIGRAPHY ANALYSES...

    Open Energy Info (EERE)

    ANALYSES ON MUDLOG GRAPHS Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Proceedings: DISPLAYING AND INTERPRETING FLUID INCLUSION STRATIGRAPHY...

  4. Methodologies for Reservoir Characterization Using Fluid Inclusion...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Surveys Chemical Signatures of and Precursors to Fractures Using Fluid Inclusion Stratigraphy Creation of an Engineered Geothermal System through Hydraulic and Thermal Stimulation...

  5. Gas powered fluid gun with recoil mitigation

    DOE Patents [OSTI]

    Grubelich, Mark C; Yonas, Gerold

    2013-11-12T23:59:59.000Z

    A gas powered fluid gun for propelling a stream or slug of a fluid at high velocity toward a target. Recoil mitigation is provided that reduces or eliminates the associated recoil forces, with minimal or no backwash. By launching a quantity of water in the opposite direction, net momentum forces are reduced or eliminated. Examples of recoil mitigation devices include a cone for making a conical fluid sheet, a device forming multiple impinging streams of fluid, a cavitating venturi, one or more spinning vanes, or an annular tangential entry/exit.

  6. Fourier's Law for a Granular Fluid

    E-Print Network [OSTI]

    James W. Dufty

    2007-07-07T23:59:59.000Z

    Newton' viscosity law for the momentum flux and Fourier's law for the heat flux define Navier-Stokes hydrodynamics for a simple, one component fluid. There is ample evidence that a hydrodynamic description applies as well to a mesoscopic granular fluid with the same form for Newton's viscosity law. However, theory predicts a qualitative difference for Fourier's law with an additional contribution from density gradients even at uniform temperature. The reasons for the absence of such terms for normal fluids are indicated, and a related microscopic explanation for their existence in granular fluids is presented.

  7. Spinning Fluids: A Group Theoretical Approach

    E-Print Network [OSTI]

    Dario Capasso; Debajyoti Sarkar

    2014-04-07T23:59:59.000Z

    We extend the Lagrangian formulation of relativistic non-abelian fluids in group theory language. We propose a Mathisson-Papapetrou equation for spinning fluids in terms of the reduction limit of de Sitter group. The equation we find correctly boils down to the one for non-spinning fluids. We study the application of our results for an FRW cosmological background for fluids with no vorticity and for dusts in the vicinity of a Kerr black hole. We also explore two alternative approaches based on a group theoretical formulation of particles dynamics.

  8. Dispatch From Sydney: Transport in the Land of Oz

    E-Print Network [OSTI]

    Landis, John

    2007-01-01T23:59:59.000Z

    N D O V E R R E A C H ? ) O F PPP S Local governments solveddevelop the SR91 tollway. ) The PPP Model was introduced inmetropolitan Sydney. The PPP model has also been used in

  9. The metamorphosis of Zionism in Amos Oz's work

    E-Print Network [OSTI]

    East, Click

    1989-01-01T23:59:59.000Z

    Mahon-Husayn letter, 24 October 1915. It is still a matter of debate whether the territorial promises that the British made to the Hashemites included Palestine, and if so, to what degree. It is critical to remember that the British also made territorial...

  10. Online Backchannel Synthesis Evaluation with the Switching Wizard of Oz

    E-Print Network [OSTI]

    Wieringa, Roel

    synthesis algorithm in an online conversation between a human speaker and a virtual listener. We adopt watches a virtual listener that is either controlled by a human listener or by an algorithm. The source-to-face dialog with a human speaker [1]. The quality of the behavior model should be measured by how the animated

  11. Under consideration for publication in J. Fluid Mech. 1 Hydroelastic waves on fluid sheets

    E-Print Network [OSTI]

    Parau, Emilian I.

    ). In particular our work may find application in flat plate-type fuel assemblies found in nuclear reactor coolingUnder consideration for publication in J. Fluid Mech. 1 Hydroelastic waves on fluid sheets M. G. B 6BT, UK (Received 26 March 2012) Nonlinear travelling waves on a two-dimensional inviscid fluid

  12. Laser microfluidics : fluid actuation by light Laser microfluidics: fluid actuation by light

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Laser microfluidics : fluid actuation by light Laser microfluidics: fluid actuation by light Jean.delville@cpmoh.u-bordeaux1.fr Abstract: The development of microfluidic devices is still hindered by the lack of robust to extend this concept to microfluidic two-phase flows. First, we investigate the destabilization of fluid

  13. Immersible solar heater for fluids

    DOE Patents [OSTI]

    Kronberg, J.W.

    1995-07-11T23:59:59.000Z

    An immersible solar heater is described comprising a light-absorbing panel attached to a frame for absorbing heat energy from the light and transferring the absorbed heat energy directly to the fluid in which the heater is immersed. The heater can be used to heat a swimming pool, for example, and is held in position and at a preselected angle by a system of floats, weights and tethers so that the panel can operate efficiently. A skid can be used in one embodiment to prevent lateral movement of the heater along the bottom of the pool. Alternative embodiments include different arrangements of the weights, floats and tethers and methods for making the heater. 11 figs.

  14. Immersible solar heater for fluids

    DOE Patents [OSTI]

    Hazen, T.C.; Fliermans, C.B.

    1994-01-01T23:59:59.000Z

    An immersible solar heater is described comprising a light-absorbing panel attached to a frame for absorbing heat energy from the light and transferring the absorbed heat energy directly to the fluid in which the heater is immersed. The heater can be used to heat a swimming pool, for example, and is held in position and at a preselected angle by a system of floats, weights and tethers so that the panel can operate efficiently. A skid can be used in one embodiment to prevent lateral movement of the heater along the bottom of the pool. Alternative embodiments include different arrangements of the weights, floats and tethers and methods for making the heater.

  15. Foam vessel for cryogenic fluid storage

    DOE Patents [OSTI]

    Spear, Jonathan D (San Francisco, CA)

    2011-07-05T23:59:59.000Z

    Cryogenic storage and separator vessels made of polyolefin foams are disclosed, as are methods of storing and separating cryogenic fluids and fluid mixtures using these vessels. In one embodiment, the polyolefin foams may be cross-linked, closed-cell polyethylene foams with a density of from about 2 pounds per cubic foot to a density of about 4 pounds per cubic foot.

  16. Geothermal Reservoir Evaluation Considering Fluid Adsorption

    E-Print Network [OSTI]

    Stanford University

    SGP-"R- 68 Geothermal Reservoir Evaluation Considering Fluid Adsorption and Composition Michael J, California #12;GEOTHERMAL RESERVOIR EVALUATION CONSIDERING FLUID ADSORPTION AND COMPOSITION A DISSERTATIONFtion phenomena is described. Then, t h e implications of adsorption on material balance calculations and on vel1

  17. Mechanical Engineering ME 3720 FLUID MECHANICS

    E-Print Network [OSTI]

    Panchagnula, Mahesh

    . Fundamentals of fluid flow; fluid statics; systems, and control volumes; continuity, momentum and energy physical model results to prototype 10. Use Moody chart to calculate friction losses in pipe flows 11 equations; dynamic similitude; One-dimensional compressible flow. The objective(s) of this course is (are

  18. Fluid permeability measurement system and method

    DOE Patents [OSTI]

    Hallman, Jr., Russell Louis (Knoxville, TN); Renner, Michael John (Oak Ridge, TN)

    2008-02-05T23:59:59.000Z

    A system for measuring the permeance of a material. The permeability of the material may also be derived. The system provides a liquid or high concentration fluid bath on one side of a material test sample, and a gas flow across the opposing side of the material test sample. The mass flow rate of permeated fluid as a fraction of the combined mass flow rate of gas and permeated fluid is used to calculate the permeance of the material. The material test sample may be a sheet, a tube, or a solid shape. Operational test conditions may be varied, including concentration of the fluid, temperature of the fluid, strain profile of the material test sample, and differential pressure across the material test sample.

  19. Theory of locomotion through complex fluids

    E-Print Network [OSTI]

    Gwynn Elfring; Eric Lauga

    2014-10-16T23:59:59.000Z

    Microorganisms such as bacteria often swim in fluid environments that cannot be classified as Newtonian. Many biological fluids contain polymers or other heterogeneities which may yield complex rheology. For a given set of boundary conditions on a moving organism, flows can be substantially different in complex fluids, while non-Newtonian stresses can alter the gait of the microorganisms themselves. Heterogeneities in the fluid may also be characterized by length scales on the order of the organism itself leading to additional dynamic complexity. In this chapter we present a theoretical overview of small-scale locomotion in complex fluids with a focus on recent efforts quantifying the impact of non-Newtonian rheology on swimming microorganisms.

  20. Pumping viscoelastic two-fluid media

    E-Print Network [OSTI]

    Hirofumi Wada

    2010-04-08T23:59:59.000Z

    Using a two-fluid model for viscoelastic polymer solutions, we study analytically fluid transport driven by a transverse, small amplitude traveling wave propagation. The pumping flow far from the waving boundary is shown to be strongly wave number and viscosity dependent, in contrast to a viscous Newtonian fluid. We find the two qualitatively different regimes: In one regime relevant to small wave numbers, the fluidic transport is almost the same as the Newtonian case, and uniform viscoelastic constitutive equations provide a good approximation. In the other regime, the pumping is substantially decreased because of the gel-like character. The boundary separating these two regimes is clarified. Our results suggest possible needs of two-fluid descriptions for the transport and locomotion in biological fluids with cilia and flagella.

  1. Euler's fluid equations: Optimal Control vs Optimization

    E-Print Network [OSTI]

    Darryl D. Holm

    2009-09-28T23:59:59.000Z

    An optimization method used in image-processing (metamorphosis) is found to imply Euler's equations for incompressible flow of an inviscid fluid, without requiring that the Lagrangian particle labels exactly follow the flow lines of the Eulerian velocity vector field. Thus, an optimal control problem and an optimization problem for incompressible ideal fluid flow both yield the \\emph {same} Euler fluid equations, although their Lagrangian parcel dynamics are \\emph{different}. This is a result of the \\emph{gauge freedom} in the definition of the fluid pressure for an incompressible flow, in combination with the symmetry of fluid dynamics under relabeling of their Lagrangian coordinates. Similar ideas are also illustrated for SO(N) rigid body motion.

  2. Paper J-07, in: V.S. Magar and M.E. Kelley (Eds.), In Situ and On-Site Bioremediation--2003. Proceedings of the Seventh International In Situ and On-Site Bioremediation Symposium (Orlando, FL; June 2003). ISBN 1-57477-139-6, published by

    E-Print Network [OSTI]

    Rockne, Karl J.

    Paper J-07, in: V.S. Magar and M.E. Kelley (Eds.), In Situ and On-Site Bioremediation--2003. Proceedings of the Seventh International In Situ and On-Site Bioremediation Symposium (Orlando, FL; June 2003

  3. The incorporation of bubbles into a computer graphics fluid simulation

    E-Print Network [OSTI]

    Greenwood, Shannon Thomas

    2005-08-29T23:59:59.000Z

    We present methods for incorporating bubbles into a photorealistc fluid simulation. Previous methods of fluid simulation in computer graphics do not include bubbles. Our system automatically creates bubbles, which are simulated on top of the fluid...

  4. Thermal Storage and Advanced Heat Transfer Fluids (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2010-08-01T23:59:59.000Z

    Fact sheet describing NREL CSP Program capabilities in the area of thermal storage and advanced heat transfer fluids: measuring thermophysical properties, measuring fluid flow and heat transfer, and simulating flow of thermal energy and fluid.

  5. In Situ Decommissioning Sensor Network, Meso-Scale Test Bed - Phase 3 Fluid Injection Test Summary Report

    SciTech Connect (OSTI)

    Serrato, M. G.

    2013-09-27T23:59:59.000Z

    The DOE Office of Environmental management (DOE EM) faces the challenge of decommissioning thousands of excess nuclear facilities, many of which are highly contaminated. A number of these excess facilities are massive and robust concrete structures that are suitable for isolating the contained contamination for hundreds of years, and a permanent decommissioning end state option for these facilities is in situ decommissioning (ISD). The ISD option is feasible for a limited, but meaningfull number of DOE contaminated facilities for which there is substantial incremental environmental, safety, and cost benefits versus alternate actions to demolish and excavate the entire facility and transport the rubble to a radioactive waste landfill. A general description of an ISD project encompasses an entombed facility; in some cases limited to the blow-grade portion of a facility. However, monitoring of the ISD structures is needed to demonstrate that the building retains its structural integrity and the contaminants remain entombed within the grout stabilization matrix. The DOE EM Office of Deactivation and Decommissioning and Facility Engineering (EM-13) Program Goal is to develop a monitoring system to demonstrate long-term performance of closed nuclear facilities using the ISD approach. The Savannah River National Laboratory (SRNL) has designed and implemented the In Situ Decommissioning Sensor Network, Meso-Scale Test Bed (ISDSN-MSTB) to address the feasibility of deploying a long-term monitoring system into an ISD closed nuclear facility. The ISDSN-MSTB goal is to demonstrate the feasibility of installing and operating a remote sensor network to assess cementitious material durability, moisture-fluid flow through the cementitious material, and resulting transport potential for contaminate mobility in a decommissioned closed nuclear facility. The original ISDSN-MSTB installation and remote sensor network operation was demonstrated in FY 2011-12 at the ISDSN-MSTB test cube located at the Florida International University Applied Research Center, Miami, FL (FIU-ARC). A follow-on fluid injection test was developed to detect fluid and ion migration in a cementitious material/grouted test cube using a limited number of existing embedded sensor systems. This In Situ Decommissioning Sensor Network, Meso-Scale Test Bed (ISDSN-MSTB) - Phase 3 Fluid Injection Test Summary Report summarizes the test implementation, acquired and processed data, and results from the activated embedded sensor systems used during the fluid injection test. The ISDSN-MSTB Phase 3 Fluid Injection Test was conducted from August 27 through September 6, 2013 at the FIU-ARC ISDSN-MSTB test cube. The fluid injection test activated a portion of the existing embedded sensor systems in the ISDSN-MSTB test cube: Electrical Resistivity Tomography-Thermocouple Sensor Arrays, Advance Tensiometer Sensors, and Fiber Loop Ringdown Optical Sensors. These embedded sensor systems were activated 15 months after initial placement. All sensor systems were remotely operated and data acquisition was completed through the established Sensor Remote Access System (SRAS) hosted on the DOE D&D Knowledge Management Information Tool (D&D DKM-IT) server. The ISDN Phase 3 Fluid Injection Test successfully demonstrated the feasibility of embedding sensor systems to assess moisture-fluid flow and resulting transport potential for contaminate mobility through a cementitious material/grout monolith. The ISDSN embedded sensor systems activated for the fluid injection test highlighted the robustness of the sensor systems and the importance of configuring systems in-depth (i.e., complementary sensors and measurements) to alleviate data acquisition gaps.

  6. A blurred interface formulation of The Reference Map Technique for Fluid-Solid Interactions and Fluid-Solid-Solid Interactions

    E-Print Network [OSTI]

    Valkov, Boris Ivanov

    2014-01-01T23:59:59.000Z

    In this work we present a blurred interface method for Fluid-Solid Interactions (FSI) and multiple solids immersed in a fluid or FSSI (Fluid-Solid-Solid Interactions) based on the reference map technique as presented by ...

  7. Evaluation of Biodiesel Fuels from Supercritical Fluid Processing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Biodiesel Fuels from Supercritical Fluid Processing with the Advanced Distillation Curve Method Evaluation of Biodiesel Fuels from Supercritical Fluid Processing with the Advanced...

  8. Chemically Reactive Working Fluids for the Capture and Transport...

    Broader source: Energy.gov (indexed) [DOE]

    Specifically, the primary heat transfer fluid (HTF), which transmits the collected solar power to power cycle Evaluate Chemically Reacting Working Fluids (CRWFs) as HTFs...

  9. ITP Chemicals: Technology Roadmap for Computational Fluid Dynamics...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fluid Dynamics, January 1999 ITP Chemicals: Technology Roadmap for Computational Fluid Dynamics, January 1999 cfdroadmap.pdf More Documents & Publications A Workshop to Identify...

  10. Gas Analysis Of Geothermal Fluid Inclusions- A New Technology...

    Open Energy Info (EERE)

    by this program can be applied to geothermal exploration, which may expand geothermal production. Knowledge of the gas contents in reservoir fluids can be applied to fluid...

  11. Variational Approach in Studying the Mixture of the Fluids: Transport ...

    E-Print Network [OSTI]

    Title: Variational Approach in Studying the Mixture of the Fluids: Transport and ... of the non-Newtonian complex fluids arise from the coupling and competing ...

  12. Development of Molten-Salt Heat Trasfer Fluid Technology for...

    Broader source: Energy.gov (indexed) [DOE]

    of Molten-Salt Heat Transfer Fluid Technology for Parabolic Trough Solar Power Plants, seeks to determine whether the inorganic fluids (molten salts) offer a sufficient...

  13. ORGANIC SPECIES IN GEOTHERMAL WATERS IN LIGHT OF FLUID INCLUSION...

    Open Energy Info (EERE)

    FLUID INCLUSION GAS ANALYSES Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Proceedings: ORGANIC SPECIES IN GEOTHERMAL WATERS IN LIGHT OF FLUID...

  14. Isotopic Analysis- Fluid At Dixie Valley Geothermal Area (Kennedy...

    Open Energy Info (EERE)

    geothermal resources with deep, fault hosted permeable fluid flow pathways and the helium Isotopic composition of the surface fluids. The authors suggest that helium isotopes...

  15. Investigation of injection-induced seismicity using a coupled fluid ...

    E-Print Network [OSTI]

    2012-01-23T23:59:59.000Z

    injection of fluid for the extraction of geothermal heat: Journal of Geo- physical ... earthquakes: Disposal of waste fluids into a deep well has triggered earth-.

  16. Application of Neutron Imaging and Scattering to Fluid Flow and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Application of Neutron Imaging and Scattering to Fluid Flow and Fracture in EGS Environments Application of Neutron Imaging and Scattering to Fluid Flow and Fracture in EGS...

  17. New fluid makes untapped geothermal energy cleaner | EMSL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    fluid makes untapped geothermal energy cleaner New fluid makes untapped geothermal energy cleaner Released: April 17, 2015 Nontoxic solution could cut water use for enhanced...

  18. Working Fluids Low Global Warming Potential Refrigerants - 2013...

    Energy Savers [EERE]

    Working Fluids Low Global Warming Potential Refrigerants - 2013 Peer Review Working Fluids Low Global Warming Potential Refrigerants - 2013 Peer Review Emerging Technologies...

  19. A STOCHASTIC METHOD FOR MODELING FLUID DISPLACEMENT IN PETROLEUM RESERVOIRS

    E-Print Network [OSTI]

    Anderson, C.

    2011-01-01T23:59:59.000Z

    FLUID DISPLACEMENT IN PETROLEUM RESERVOIRS C. Anderson andFLUID DISPLACEMENT IN PETROLEUM RESERVOIRS C. Anderson andachieve optimal recovery of petroleum from a reservoir, it

  20. Packing frustration in dense confined fluids

    E-Print Network [OSTI]

    Kim Nygĺrd; Sten Sarman; Roland Kjellander

    2014-09-04T23:59:59.000Z

    Packing frustration for confined fluids, i.e., the incompatibility between the preferred packing of the fluid particles and the packing constraints imposed by the confining surfaces, is studied for a dense hard-sphere fluid confined between planar hard surfaces at short separations. The detailed mechanism for the frustration is investigated via an analysis of the anisotropic pair distributions of the confined fluid, as obtained from integral equation theory for inhomogeneous fluids at pair correlation level within the anisotropic Percus-Yevick approximation. By examining the mean forces that arise from interparticle collisions around the periphery of each particle in the slit, we calculate the principal components of the mean force for the density profile - each component being the sum of collisional forces on a particle's hemisphere facing either surface. The variations of these components with the slit width give rise to rather intricate changes in the layer structure between the surfaces, but, as shown in this paper, the basis of these variations can be easily understood qualitatively and often also semi-quantitatively. It is found that the ordering of the fluid is in essence governed locally by the packing constraints at each single solid-fluid interface. A simple superposition of forces due to the presence of each surface gives surprisingly good estimates of the density profiles, but there remain nontrivial confinement effects that cannot be explained by superposition, most notably the magnitude of the excess adsorption of particles in the slit relative to bulk.

  1. Creating fluid injectivity in tar sands formations

    DOE Patents [OSTI]

    Stegemeier, George Leo; Beer, Gary Lee; Zhang, Etuan

    2012-06-05T23:59:59.000Z

    Methods for treating a tar sands formation are described herein. Methods for treating a tar sands may include heating a portion of a hydrocarbon layer in the formation from one or more heaters located in the portion. The heat may be controlled to increase the permeability of at least part of the portion to create an injection zone in the portion with an average permeability sufficient to allow injection of a fluid through the injection zone. A drive fluid and/or an oxidizing fluid may be provided into the injection zone. At least some hydrocarbons including mobilized hydrocarbons are produced from the portion.

  2. Geothermal energy production with supercritical fluids

    DOE Patents [OSTI]

    Brown, Donald W.

    2003-12-30T23:59:59.000Z

    There has been invented a method for producing geothermal energy using supercritical fluids for creation of the underground reservoir, production of the geothermal energy, and for heat transport. Underground reservoirs are created by pumping a supercritical fluid such as carbon dioxide into a formation to fracture the rock. Once the reservoir is formed, the same supercritical fluid is allowed to heat up and expand, then is pumped out of the reservoir to transfer the heat to a surface power generating plant or other application.

  3. Creating fluid injectivity in tar sands formations

    DOE Patents [OSTI]

    Stegemeier, George Leo; Beer, Gary Lee; Zhang, Etuan

    2010-06-08T23:59:59.000Z

    Methods for treating a tar sands formation are described herein. Methods for treating a tar sands may include heating a portion of a hydrocarbon layer in the formation from one or more heaters located in the portion. The heat may be controlled to increase the permeability of at least part of the portion to create an injection zone in the portion with an average permeability sufficient to allow injection of a fluid through the injection zone. A drive fluid and/or an oxidizing fluid may be provided into the injection zone. At least some hydrocarbons are produced from the portion.

  4. Tunable Dipolar Capillary Deformations for Magnetic Janus Particles at Fluid-Fluid Interfaces

    E-Print Network [OSTI]

    Qingguang Xie; Gary B. Davies; Florian Günther; Jens Harting

    2015-03-12T23:59:59.000Z

    Janus particles have attracted significant interest as building blocks for complex materials in recent years. Furthermore, capillary interactions have been identified as a promising tool for directed self-assembly of particles at fluid-fluid interfaces. In this paper, we develop theoretical models describing the behaviour of magnetic Janus particles adsorbed at fluid-fluid interfaces interacting with an external magnetic field. Using numerical simulations, we test the models predictions and show that the magnetic Janus particles deform the interface in a dipolar manner. We suggest how to utilise the resulting dipolar capillary interactions to assemble particles at a fluid-fluid interface, and further demonstrate that the strength of these interactions can be tuned by altering the external field strength, opening up the possibility to create novel, reconfigurable materials.

  5. Tunable Dipolar Capillary Deformations for Magnetic Janus Particles at Fluid-Fluid Interfaces

    E-Print Network [OSTI]

    Xie, Qingguang; Günther, Florian; Harting, Jens

    2015-01-01T23:59:59.000Z

    Janus particles have attracted significant interest as building blocks for complex materials in recent years. Furthermore, capillary interactions have been identified as a promising tool for directed self-assembly of particles at fluid-fluid interfaces. In this paper, we develop theoretical models describing the behaviour of magnetic Janus particles adsorbed at fluid-fluid interfaces interacting with an external magnetic field. Using numerical simulations, we test the models predictions and show that the magnetic Janus particles deform the interface in a dipolar manner. We suggest how to utilise the resulting dipolar capillary interactions to assemble particles at a fluid-fluid interface, and further demonstrate that the strength of these interactions can be tuned by altering the external field strength, opening up the possibility to create novel, reconfigurable materials.

  6. Using Nanotechnology in Viscoelastic Surfactant Stimulation Fluids

    E-Print Network [OSTI]

    Gurluk, Merve Rabia 1986-

    2012-11-12T23:59:59.000Z

    Viscoelastic surfactant (VES) fluids are preferred for many applications in the oil industry. Their viscoelastic behavior is due to the overlap and entanglement of very long wormlike micelles. The growth of these wormlike micelles depends...

  7. Variational Methods for Computational Fluid Dynamics

    E-Print Network [OSTI]

    Alouges, François

    .2.1 Generalities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 2.2.2 Going back-structure interactions 35 4.1 A non deformable solid in a fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 velocity . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 6 Stokes equations 49 6.1 Mixed finite

  8. Fluid Bed Combustion Applied to Industrial Waste

    E-Print Network [OSTI]

    Mullen, J. F.; Sneyd, R. J.

    Because of its unique ability to handle a wide variety of liquids and solids in an energy efficient and environmentally acceptable manner, fluid bed combustion is being increasingly applied to the utilization of waste materials and low grade fuels...

  9. THE UNIVERSITY OF MANCHESTER FLUID MECHANICS

    E-Print Network [OSTI]

    Glendinning, Paul

    (i.e. fluid) particle. Use these facts to deduce two equations involving the unknowns f equilibrium under constant gravitational accel- eration g, i.e. F = (0, 0, -g). At `sea-level' z = 0 (z being

  10. Reactive flash volatilization of fluid fuels

    DOE Patents [OSTI]

    Schmidt, Lanny D.; Dauenhauer, Paul J.; Dreyer, Bradon J.; Salge, James R.

    2013-01-08T23:59:59.000Z

    The invention provides methods for the production of synthesis gas. More particularly, various embodiments of the invention relate to systems and methods for volatilizing fluid fuel to produce synthesis gas by using a metal catalyst on a solid support matrix.

  11. Fluid Dynamics in Sucker Rod Pumps

    SciTech Connect (OSTI)

    Cutler, R.P.; Mansure, A.J.

    1999-01-14T23:59:59.000Z

    Sucker rod pumps are installed in approximately 90% of all oil wells in the U.S. Although they have been widely used for decades, there are many issues regarding the fluid dynamics of the pump that have not been fully investigated. A project was conducted at Sandia National Laboratories to develop unimproved understanding of the fluid dynamics inside a sucker rod pump. A mathematical flow model was developed to predict pressures in any pump component or an entire pump under single-phase fluid and pumping conditions. Laboratory flow tests were conducted on instrumented individual pump components and on a complete pump to verify and refine the model. The mathematical model was then converted to a Visual Basic program to allow easy input of fluid, geometry and pump parameters and to generate output plots. Examples of issues affecting pump performance investigated with the model include the effects of viscosity, surface roughness, valve design details, plunger and valve pressure differentials, and pumping rate.

  12. Applied Fluid Mechanics I) Course goals

    E-Print Network [OSTI]

    Leu, Tzong-Shyng "Jeremy"

    design. #12;2 Textbook " Applied Fluid Mechanics" by Robert L. Mott, Sixth Edition in SI unit 1 Exam 30 Final Exam 30 (Total of 100) (30%)(&10%) () PDF lecture notes if any can be downloaded from

  13. Heat-Traced Fluid Transfer Lines

    E-Print Network [OSTI]

    Schilling, R. E.

    1984-01-01T23:59:59.000Z

    HEAT-TRACED FLUID TRANSFER LINES Robert E. Schilling, P.E. Eaton Corporation Aurora, Ohio This paper discusses basic considerations in designing a heat tracing system using either steam or electrical tracing. Four basic reasons to heat...

  14. Recovery Act-Funded Working Fluid Projects

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy was allocated funding from the American Recovery and Reinvestment Act to conduct research into working fluid technologies and applications. Projects funded by the...

  15. High gliding fluid power generation system with fluid component separation and multiple condensers

    DOE Patents [OSTI]

    Mahmoud, Ahmad M; Lee, Jaeseon; Radcliff, Thomas D

    2014-10-14T23:59:59.000Z

    An example power generation system includes a vapor generator, a turbine, a separator and a pump. In the separator, the multiple components of the working fluid are separated from each other and sent to separate condensers. Each of the separate condensers is configured for condensing a single component of the working fluid. Once each of the components condense back into a liquid form they are recombined and exhausted to a pump that in turn drives the working fluid back to the vapor generator.

  16. A LAGRANGIAN-EULERIAN SHELL-FLUID COUPLING ALGORITHM BASED ON LEVEL

    E-Print Network [OSTI]

    Cirak, Fehmi

    is demonstrated with an airbag deployment simulation. Key words: shell, fluid, shell-fluid interaction, finite

  17. Stirling engine with air working fluid

    SciTech Connect (OSTI)

    Corey, J. A.

    1985-08-06T23:59:59.000Z

    A Stirling engine capable of utilizing air as a working fluid which includes a compact heat exchange module which includes heating tube units, regenerator and cooler positioned about the combustion chamber. This arrangement has the purpose and effect of allowing the construction of an efficient, high-speed, high power-density engine without the use of difficult to seal light gases as working fluids.

  18. Control system for fluid heated steam generator

    DOE Patents [OSTI]

    Boland, James F. (Bonneville County, ID); Koenig, John F. (Idaho Falls, ID)

    1985-01-01T23:59:59.000Z

    A control system for controlling the location of the nucleate-boiling region in a fluid heated steam generator comprises means for measuring the temperature gradient (change in temperature per unit length) of the heating fluid along the steam generator; means for determining a control variable in accordance with a predetermined function of temperature gradients and for generating a control signal in response thereto; and means for adjusting the feedwater flow rate in accordance with the control signal.

  19. Moment of Fluid Interface Reconstruction with Filaments

    SciTech Connect (OSTI)

    Jemison, Matthew B. [Los Alamos National Laboratory

    2012-08-15T23:59:59.000Z

    A moving system made up of multiple fluids (e.g. air and water) may be defined by an evolving interface with a changing topology. MOF uses a piecewise linear interface reconstruction to numerically model deforming boundaries. Given a volume fraction V and reference centroid x for a material in cell {Omega}, we seek to find an interface {Gamma} that exactly captures V and minimizes error in x. This differs from Volume of Fluid methods.

  20. Viscosity of High Energy Nuclear Fluids

    E-Print Network [OSTI]

    V. Parihar; A. Widom; D. Drosdoff; Y. N. Srivastava

    2007-03-15T23:59:59.000Z

    Relativistic high energy heavy ion collision cross sections have been interpreted in terms of almost ideal liquid droplets of nuclear matter. The experimental low viscosity of these nuclear fluids have been of considerable recent quantum chromodynamic interest. The viscosity is here discussed in terms of the string fragmentation models wherein the temperature dependence of the nuclear fluid viscosity obeys the Vogel-Fulcher-Tammann law.

  1. Control system for fluid heated steam generator

    DOE Patents [OSTI]

    Boland, J.F.; Koenig, J.F.

    1984-05-29T23:59:59.000Z

    A control system for controlling the location of the nucleate-boiling region in a fluid heated steam generator comprises means for measuring the temperature gradient (change in temperature per unit length) of the heating fluid along the steam generator; means for determining a control variable in accordance with a predetermined function of temperature gradients and for generating a control signal in response thereto; and means for adjusting the feedwater flow rate in accordance with the control signal.

  2. Nanoparticle enhanced ionic liquid heat transfer fluids

    DOE Patents [OSTI]

    Fox, Elise B.; Visser, Ann E.; Bridges, Nicholas J.; Gray, Joshua R.; Garcia-Diaz, Brenda L.

    2014-08-12T23:59:59.000Z

    A heat transfer fluid created from nanoparticles that are dispersed into an ionic liquid is provided. Small volumes of nanoparticles are created from e.g., metals or metal oxides and/or alloys of such materials are dispersed into ionic liquids to create a heat transfer fluid. The nanoparticles can be dispersed directly into the ionic liquid during nanoparticle formation or the nanoparticles can be formed and then, in a subsequent step, dispersed into the ionic liquid using e.g., agitation.

  3. Fluid driven torsional dipole seismic source

    DOE Patents [OSTI]

    Hardee, Harry C. (Albuquerque, NM)

    1991-01-01T23:59:59.000Z

    A compressible fluid powered oscillating downhole seismic source device capable of periodically generating uncontaminated horizontally-propagated, shear waves is provided. A compressible fluid generated oscillation is created within the device which imparts an oscillation to a housing when the device is installed in a housing such as the cylinder off an existing downhole tool, thereby a torsional seismic source is established. Horizontal waves are transferred to the surrounding bore hole medium through downhole clamping.

  4. Stirling engine with air working fluid

    DOE Patents [OSTI]

    Corey, John A. (North Troy, NY)

    1985-01-01T23:59:59.000Z

    A Stirling engine capable of utilizing air as a working fluid which includes a compact heat exchange module which includes heating tube units, regenerator and cooler positioned about the combustion chamber. This arrangement has the purpose and effect of allowing the construction of an efficient, high-speed, high power-density engine without the use of difficult to seal light gases as working fluids.

  5. Anisotropic surface tension of buckled fluid membrane

    E-Print Network [OSTI]

    Hiroshi Noguchi

    2011-06-01T23:59:59.000Z

    Solid sheets and fluid membranes exhibit buckling under lateral compression. Here, it is revealed that fluid membranes have anisotropic buckling surface tension contrary to solid sheets. Surprisingly, the surface tension perpendicular to the buckling direction shows stronger dependence than that parallel to it. Our theoretical predictions are supported by numerical simulations of a meshless membrane model. This anisotropic tension can be used to measure the membrane bending rigidity. It is also found phase synchronization occurs between multilayered buckled membranes.

  6. Effective interactions between fluid membranes

    E-Print Network [OSTI]

    Bing-Sui Lu; Rudolf Podgornik

    2015-05-01T23:59:59.000Z

    A self-consistent theory is proposed for the general problem of interacting undulating fluid membranes subject to the constraint that they do not interpenetrate. The steric constraint is implemented via a representation of the Heaviside function, which enables one to transform it into a novel effective steric potential. The steric potential is found to consist of two contributions: one generated by zero mode fluctuations of the membranes, and the other by thermal bending fluctuations. For membranes of cross-sectional area $S$, we find that the bending fluctuation part scales with the inter-membrane separation $d$ as $d^{-2}$ for $d \\ll \\sqrt{S}$, but crosses over to $d^{-4}$ scaling for $d \\gg \\sqrt{S}$, whereas the zero mode part of the steric potential always scales as $d^{-2}$. For membranes interacting exclusively via the steric potential, we obtain exact nonlinear expressions for the effective interaction potential and for the rms undulation amplitude $\\sigma$, which becomes small at low temperatures $T$ and/or large bending stiffnesses $\\kappa$. Moreover, $\\sigma$ scales as $d$ for $d \\ll \\sqrt{S}$, but saturates at $\\sqrt{k_{{\\rm B}} T S/\\kappa}$ for $d \\gg \\sqrt{S}$. In addition, using variational Gaussian theory, we apply our self-consistent treatment to study inter-membrane interactions subject to three different types of potential: (i)~the Moreira-Netz potential for a pair of strongly charged membranes with an intervening solution of multivalent counterions, (ii)~an attractive square well, (iii)~the Morse potential, and (iv)~a combination of hydration and van der Waals interactions.

  7. Pump for molten metal or other fluid

    DOE Patents [OSTI]

    Horton, James A. (Livermore, CA); Brown, Donald L. (Livermore, CA)

    1994-01-01T23:59:59.000Z

    A pump having no moving parts which can be used to pump high temperature molten metal or other fluids in a vacuum or low pressure environment, and a method for pumping such fluids. The pump combines elements of a bubble pump with a trap which isolates the vacuum or low pressure region from the gas used to create the bubbles. When used in a vacuum the trap prevents the pumping gas from escaping into the isolated region and thereby reducing the quality of the vacuum. The pump includes a channel in which a pumping gas is forced under pressure into a cavity where bubbles are formed. The cavity is in contact with a reservoir which contains the molten metal or other fluid which is to be pumped. The bubbles rise up into a column (or pump tube) carrying the fluid with them. At the top of the column is located a deflector which causes the bubbles to burst and the drops of pumped fluid to fall into a trap. The fluid accumulates in the trap, eventually forcing its way to an outlet. A roughing pump can be used to withdraw the pumping gas from the top of the column and assist with maintaining the vacuum or low pressure environment.

  8. Fossil evidence for serpentinization fluids fueling chemosynthetic assemblages

    E-Print Network [OSTI]

    Demouchy, Sylvie

    Fossil evidence for serpentinization fluids fueling chemosynthetic assemblages Franck Lartauda,b,1 years, Lost City on the Mid-Atlantic Ridge (MAR) is remarkable both for its alkaline fluids derived from these fluids. Despite high concentrations of reduced chemicals in the fluids, this unique example of a serpenti

  9. 22209_HPC_cvr_FL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del(ANL-IN-03-032) -Less isNFebruaryOctober 2, 2014Energy,F β--DecayO1.0 -124 J-1

  10. "Nanotechnology Enabled Advanced Industrial Heat Transfer Fluids"

    SciTech Connect (OSTI)

    Dr. Ganesh Skandan; Dr. Amit Singhal; Mr. Kenneth Eberts; Mr. Damian Sobrevilla; Prof. Jerry Shan; Stephen Tse; Toby Rossmann

    2008-06-12T23:59:59.000Z

    ABSTRACT Nanotechnology Enabled Advanced industrial Heat Transfer Fluids” Improving the efficiency of Industrial Heat Exchangers offers a great opportunity to improve overall process efficiencies in diverse industries such as pharmaceutical, materials manufacturing and food processing. The higher efficiencies can come in part from improved heat transfer during both cooling and heating of the material being processed. Additionally, there is great interest in enhancing the performance and reducing the weight of heat exchangers used in automotives in order to increase fuel efficiency. The goal of the Phase I program was to develop nanoparticle containing heat transfer fluids (e.g., antifreeze, water, silicone and hydrocarbon-based oils) that are used in transportation and in the chemical industry for heating, cooling and recovering waste heat. Much work has been done to date at investigating the potential use of nanoparticle-enhanced thermal fluids to improve heat transfer in heat exchangers. In most cases the effect in a commercial heat transfer fluid has been marginal at best. In the Phase I work, we demonstrated that the thermal conductivity, and hence heat transfer, of a fluid containing nanoparticles can be dramatically increased when subjected to an external influence. The increase in thermal conductivity was significantly larger than what is predicted by commonly used thermal models for two-phase materials. Additionally, the surface of the nanoparticles was engineered so as to have a minimal influence on the viscosity of the fluid. As a result, a nanoparticle-laden fluid was successfully developed that can lead to enhanced heat transfer in both industrial and automotive heat exchangers

  11. Selective evaporation of focusing fluid in two-fluid hydrodynamic print head.

    SciTech Connect (OSTI)

    Keicher, David M.; Cook, Adam W.

    2014-09-01T23:59:59.000Z

    The work performed in this project has demonstrated the feasibility to use hydrodynamic focusing of two fluid steams to create a novel micro printing technology for electronics and other high performance applications. Initial efforts focused solely on selective evaporation of the sheath fluid from print stream provided insight in developing a unique print head geometry allowing excess sheath fluid to be separated from the print flow stream for recycling/reuse. Fluid flow models suggest that more than 81 percent of the sheath fluid can be removed without affecting the print stream. Further development and optimization is required to demonstrate this capability in operation. Print results using two-fluid hydrodynamic focusing yielded a 30 micrometers wide by 0.5 micrometers tall line that suggests that the cross-section of the printed feature from the print head was approximately 2 micrometers in diameter. Printing results also demonstrated that complete removal of the sheath fluid is not necessary for all material systems. The two-fluid printing technology could enable printing of insulated conductors and clad optical interconnects. Further development of this concept should be pursued.

  12. Microfluidic Arrays of Fluid-Fluid Diffusional Contacts as Detection Elements and Combinatorial

    E-Print Network [OSTI]

    Kenis, Paul J. A.

    Microfluidic Arrays of Fluid-Fluid Diffusional Contacts as Detection Elements and Combinatorial microfluidic systems that can be used to investigate multiple chemical or biochemical interactions in a parallel format. These three-dimensional systems are generated by crossing two sets of microfluidic

  13. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS Int. J. Numer. Meth. Fluids 31: 10191033 (1999)

    E-Print Network [OSTI]

    Amsterdam, Universiteit van

    1999-01-01T23:59:59.000Z

    ­1033 (1999) LATTICE-BOLTZMANN AND FINITE ELEMENT SIMULATIONS OF FLUID FLOW IN A SMRX STATIC MIXER REACTOR D-dimensional fluid flow simulations in an SMRX static mixer were performed. The SMRX static mixer is a piece methods. Copyright © 1999 John Wiley & Sons, Ltd. KEY WORDS: static mixer; finite element method; lattice

  14. Ultrasonic fluid flow measurement method and apparatus

    DOE Patents [OSTI]

    Kronberg, J.W.

    1993-10-12T23:59:59.000Z

    An apparatus for measuring the flow of a fluid in a pipe using ultrasonic waves. The apparatus comprises an ultrasonic generator, a lens for focusing the sound energy produced by the generator, and means for directing the focused energy into the side of the pipe through an opening and in a direction close to parallel to the long axis of the pipe. A cone carries the sound energy to the lens from the generator. Depending on the choice of materials, there may be a quarter-wave, acoustic impedance matching section between the generator and the cone to reduce the reflections of energy at the cone boundary. The lens material has an acoustic impedance similar to that of the cone material but a different sonic velocity so that the lens can converge the sound waves in the fluid. A transition section between the lens and the fluid helps to couple the energy to the fluid and assures it is directed as close to parallel to the fluid flow direction as possible. 3 figures.

  15. Ultrasonic fluid flow measurement method and apparatus

    DOE Patents [OSTI]

    Kronberg, James W. (108 Independent Blvd., Aiken, SC 29801)

    1993-01-01T23:59:59.000Z

    An apparatus for measuring the flow of a fluid in a pipe using ultrasonic waves. The apparatus comprises an ultrasonic generator, a lens for focusing the sound energy produced by the generator, and means for directing the focused energy into the side of the pipe through an opening and in a direction close to parallel to the long axis of the pipe. A cone carries the sound energy to the lens from the generator. Depending on the choice of materials, there may be a quarter-wave, acoustic impedance matching section between the generator and the cone to reduce the reflections of energy at the cone boundary. The lens material has an acoustic impedance similar to that of the cone material but a different sonic velocity so that the lens can converge the sound waves in the fluid. A transition section between the lens and the fluid helps to couple the energy to the fluid and assures it is directed as close to parallel to the fluid flow direction as possible.

  16. Fluid flow control with transformation media

    E-Print Network [OSTI]

    Urzhumov, Yaroslav A

    2011-01-01T23:59:59.000Z

    We introduce a new concept for the manipulation of fluid flow around three-dimensional bodies. Inspired by transformation optics, the concept is based on a mathematical idea of coordinate transformations, and physically implemented with anisotropic porous media permeable to the flow of fluids. In two different situations - for an impermeable object situated either in a free-flowing fluid or in a fluid-filled porous medium - we show that the object can be coated with a properly chosen inhomogeneous, anisotropic permeable medium, such as to preserve the streamlines of flow and the pressure distribution that would have existed in the absence of the object. The proposed fluid flow cloak completely eliminates any disturbance of the flow by the object, including the downstream wake. Consequently, the structure helps prevent the onset of turbulence by keeping the flow laminar even above the typical critical Reynolds number for the object of the same shape and size. The cloak also cancels the viscous drag force. This...

  17. Full Life Wind Turbine Gearbox Lubricating Fluids

    SciTech Connect (OSTI)

    Lutz, Glenn A.; Jungk, Manfred; Bryant, Jonathan J.; Lauer, Rebecca S.; Chobot, Anthony; Mayer, Tyler; Palmer, Shane; Kauffman, Robert E.

    2012-02-28T23:59:59.000Z

    Industrial gear box lubricants typically are hydrocarbon based mineral oils with considerable amounts of additives to overcome the lack of base fluid properties like wear protection, oxidation stability, load carrying capacity, low temperature solidification and drop of viscosity at higher temperatures. For today's wind turbine gearboxes, the requirements are more severe and synthetic hydrocarbon oils are used to improve on this, but all such hydrocarbon based lubricants require significant amounts of Extreme Pressure (EP) additives to meet performance requirements. Perfluoropolyether (PFPE) fluids provide load carrying capacity as an inherent property. During the course of the project with the main tasks of 'Establish a Benchmark', 'Lubricant Evaluation', 'Full Scale Gearbox Trial' and 'Economic Evaluation', the PAO Reference oil exhibited significant changes after laboratory gear testing, in service operation in the field and full scale gearbox trial. Four hydrocarbon base oils were selected for comparison in the benchmarking exercise and showed variation with respect to meeting the requirements for the laboratory micro-pitting tests, while the PFPE fluid exceeded the requirements even with the material taken after the full scale gear box trial. This is remarkable for a lubricant without EP additives. Laboratory bearing tests performed on the PFPE fluids before and after the full scale gear box trial showed the results met requirements for the industry standard. The PFPE fluid successfully completed the full scale gear box test program which included baseline and progressive staged load testing. The evaluation of gears showed no micro-pitting or objectionable wear. By the final stage, lubricant film thickness had been reduced to just 21% of its original value, this was by design and resulted in a lambda ratio of well below 1. This test design scenario of a low lambda ratio is a very undesirable lubrication condition for real world but creates the ability to test the lubricating fluids performance under the most extreme conditions. The PAO Reference oil also passed its testing without any noticeable deterioration of the gear surface. However the PAO Reference oil was replaced midway through the progressive loading, as the lubricant was burned in an attempt to raise the sump temperature to the same levels as for the PFPE. Both materials experienced a decrease of viscosity during their respective run times. The viscosity index decreased for the PAO there while there was a slight increase for the PFPE. FZG laboratory gear tests and measurements of the drive motor's current during the full scale gear box trial were made to characterize the relative efficiency between the PFPE fluid and the PAO Reference oil. In the FZG laboratory efficiency test, the PFPE fluids show much higher churning losses due to their higher viscosity and density. The analysis seems to show that the efficiency correlates better to dynamic viscosity than any other of the measured metrics such as film thickness. In load stages where the load, speed and temperature are similar, the PFPE fluid has a greater film thickness and theoretical gear protection, but requires a larger current for the drive motor than the PAO. However in load stages where the film thickness is the same, the PFPE fluid's reduced dynamic viscosity gives it a slight efficiency advantage relative to the PAO reference oil. Ultimately, many factors such as temperature, rotational speed, and fluid viscosity combine in a complex fashion to influence the results. However, the PFPE's much lower change of viscosity with respect to temperature, allows variations in designing an optimum viscosity to balance efficiency versus gear protection. Economic analysis was done using Cost of Energy calculations. The results vary from 5.3% for a 'Likely Case' to 16.8% for a 'Best Case' scenario as potential cost improvement by using PFPE as the gearbox lubricating fluid. It is important to note the largest portion of savings comes in Levelized Replacement Cost, which is dictated by the assumption on gearb

  18. Detecting low levels of radionuclides in fluids

    DOE Patents [OSTI]

    Patch, Keith D. (Lexington, MA); Morgan, Dean T. (Sudbury, MA)

    2000-01-01T23:59:59.000Z

    An apparatus and method for detecting low levels of one or more radionuclides in a fluid sample uses a substrate that includes an ion exchange resin or other sorbent material to collect the radionuclides. A collecting apparatus includes a collecting chamber that exposes the substrate to a measured amount of the fluid sample such that radionuclides in the fluid sample are collected by the ion exchange resin. A drying apparatus, which can include a drying chamber, then dries the substrate. A measuring apparatus measures emissions from radionuclides collected on the substrate. The substrate is positioned in a measuring chamber proximate to a detector, which provides a signal in response to emissions from the radionuclides. Other analysis methods can be used to detect non-radioactive analytes, which can be collected with other types of sorbent materials.

  19. Static dielectric properties of dense ionic fluids

    E-Print Network [OSTI]

    Zarubin, Grigory

    2015-01-01T23:59:59.000Z

    The static dielectric properties of dense ionic fluids, e.g., room temperature ionic liquids (RTILs) and inorganic fused salts, are investigated on different length scales by means of grandcanonical Monte Carlo simulations. A generally applicable scheme is developed which allows one to approximately decompose the electric susceptibility of dense ionic fluids into the orientation and the distortion polarization contribution. It is shown that at long range the well-known plasma-like perfect screening behavior occurs, which corresponds to a diverging distortion susceptibility, whereas at short range orientation polarization dominates, which coincides with that of a dipolar fluid of attached cation-anion pairs. This observation suggests that the recently debated interpretation of RTILs as dilute electrolyte solutions might not be simply a yes-no-question but it might depend on the considered length scale.

  20. Carbon-bearing fluids at nanoscale interfaces

    SciTech Connect (OSTI)

    Cole, David [Ohio State University; Ok, Salim [Ohio State University, Columbus; Phan, A [Ohio State University, Columbus; Rother, Gernot [ORNL; Striolo, Alberto [Oklahoma University; Vlcek, Lukas [ORNL

    2013-01-01T23:59:59.000Z

    The behaviour of fluids at mineral surfaces or in confined geometries (pores, fractures) typically differs from their bulk behaviour in many ways due to the effects of large internal surfaces and geometrical confinement. We summarize research performed on C-O-H fluids at nanoscale interfaces in materials of interest to the earth and material sciences (e.g., silica, alumina, zeolites, clays, rocks, etc.), emphasizing those techniques that assess microstructural modification and/or dynamical behaviour such as gravimetric analysis, small-angle (SANS) neutron scattering, and nuclear magnetic resonance (NMR). Molecular dynamics (MD) simulations will be described that provide atomistic characterization of interfacial and confined fluid behaviour as well as aid in the interpretation of the neutron scattering results.

  1. Fuel cell membrane hydration and fluid metering

    DOE Patents [OSTI]

    Jones, Daniel O. (Glenville, NY); Walsh, Michael M. (Fairfield, CT)

    2003-01-01T23:59:59.000Z

    A hydration system includes fuel cell fluid flow plate(s) and injection port(s). Each plate has flow channel(s) with respective inlet(s) for receiving respective portion(s) of a given stream of reactant fluid for a fuel cell. Each injection port injects a portion of liquid water directly into its respective flow channel. This serves to hydrate at least corresponding part(s) of a given membrane of the corresponding fuel cell(s). The hydration system may be augmented by a metering system including flow regulator(s). Each flow regulator meters an injecting at inlet(s) of each plate of respective portions of liquid into respective portion(s) of a given stream of fluid by corresponding injection port(s).

  2. Fuel cell membrane hydration and fluid metering

    DOE Patents [OSTI]

    Jones, Daniel O. (Glenville, NY); Walsh, Michael M. (Fairfield, CT)

    1999-01-01T23:59:59.000Z

    A hydration system includes fuel cell fluid flow plate(s) and injection port(s). Each plate has flow channel(s) with respective inlet(s) for receiving respective portion(s) of a given stream of reactant fluid for a fuel cell. Each injection port injects a portion of liquid water directly into its respective flow channel in order to mix its respective portion of liquid water with the corresponding portion of the stream. This serves to hydrate at least corresponding part(s) of a given membrane of the corresponding fuel cell(s). The hydration system may be augmented by a metering system including flow regulator(s). Each flow regulator meters an injecting at inlet(s) of each plate of respective portions of liquid into respective portion(s) of a given stream of fluid by corresponding injection port(s).

  3. Geomechanical Simulation of Fluid-Driven Fractures

    SciTech Connect (OSTI)

    Makhnenko, R.; Nikolskiy, D.; Mogilevskaya, S.; Labuz, J.

    2012-11-30T23:59:59.000Z

    The project supported graduate students working on experimental and numerical modeling of rock fracture, with the following objectives: (a) perform laboratory testing of fluid-saturated rock; (b) develop predictive models for simulation of fracture; and (c) establish educational frameworks for geologic sequestration issues related to rock fracture. These objectives were achieved through (i) using a novel apparatus to produce faulting in a fluid-saturated rock; (ii) modeling fracture with a boundary element method; and (iii) developing curricula for training geoengineers in experimental mechanics, numerical modeling of fracture, and poroelasticity.

  4. Dynamics of fluid-conveying Timoshenko pipes

    E-Print Network [OSTI]

    Petrus, Ryan Curtis

    2006-08-16T23:59:59.000Z

    that satisfy the ?non-fluid? essential and natural boundary conditions, and determine the non-dimensional critical velocities at which the system goes unstable. Once the critical velocities are ascertained, the second half will begin with a time... and polynomial functions. The trigonometric\\hyperbolic functions are exact solutions to (4.16) subject to cantilevered boundary conditions (4.17)-(4.20). The th non dimensional natural frequency of the non-fluid beam is given by 2 sinh sin cosh cos 0...

  5. The Geometric Structure of Complex Fluids

    E-Print Network [OSTI]

    François Gay-Balmaz; Tudor S. Ratiu

    2009-03-25T23:59:59.000Z

    This paper develops the theory of affine Euler-Poincar\\'e and affine Lie-Poisson reductions and applies these processes to various examples of complex fluids, including Yang-Mills and Hall magnetohydrodynamics for fluids and superfluids, spin glasses, microfluids, and liquid crystals. As a consequence of the Lagrangian approach, the variational formulation of the equations is determined. On the Hamiltonian side, the associated Poisson brackets are obtained by reduction of a canonical cotangent bundle. A Kelvin-Noether circulation theorem is presented and is applied to these examples.

  6. Gravitational Collapse of Inhomogenous Perfect Fluid

    E-Print Network [OSTI]

    Seema Satin; Daniele Malafarina; Pankaj S. Joshi

    2014-09-01T23:59:59.000Z

    We study the complete gravitational collapse of a class of inhomogeneous perfect fluid models obtained by introducing small radial perturbations in an otherwise homogeneous matter cloud. The key feature that we assume for the perturbation profile is that of a mass profile that is separable in radial and temporal coordinates. The known models of dust and homogeneous perfect fluid collapse can be obtained from this choice of the mass profile as special cases. This choice is very general and physically well motivated and we show that this class of collapse models can lead to the formation of a naked singularity as the final state.

  7. Apparent horizon in fluid-gravity duality

    SciTech Connect (OSTI)

    Booth, Ivan; Heller, Michal P.; Plewa, Grzegorz; Spalinski, Michal [Department of Mathematics and Statistics, Memorial University of Newfoundland, St. John's, Newfoundland and Labrador, A1C 5S7 (Canada); Instituut voor Theoretische Fysica, Universiteit van Amsterdam, Science Park 904, 1090 GL Amsterdam (Netherlands); Soltan Institute for Nuclear Studies, Hoza 69, 00-681 Warsaw (Poland); Soltan Institute for Nuclear Studies, Hoza 69, 00-681 Warsaw (Poland) and Physics Department, University of Bialystok, 15-424 Bialystok (Poland)

    2011-05-15T23:59:59.000Z

    This article develops a computational framework for determining the location of boundary-covariant apparent horizons in the geometry of conformal fluid-gravity duality in arbitrary dimensions. In particular, it is shown up to second order and conjectured to hold to all orders in the gradient expansion that there is a unique apparent horizon which is covariantly expressible in terms of fluid velocity, temperature, and boundary metric. This leads to the first explicit example of an entropy current defined by an apparent horizon and opens the possibility that in the near-equilibrium regime there is preferred foliation of apparent horizons for black holes in asymptotically anti-de Sitter spacetimes.

  8. Static charged fluid spheres in general relativity

    E-Print Network [OSTI]

    B. V. Ivanov

    2001-09-04T23:59:59.000Z

    Interior perfect fluid solutions for the Reissner-Nordstrom metric are studied on the basis of a new classification scheme. It specifies which two of the fluid's characteristics are given functions and picks up accordingly one of the three main field equations, the other two being universal. General formulae are found for charged de Sitter solutions, the case of constant energy component of the energy-momentum tensor, the case of known pressure (including charged dust) and the case of linear equation of state. Explicit new global solutions, mainly in elementary functions, are given as illustrations. Known solutions are briefly reviewed and corrected.

  9. Fluid sphere: stability problem and dimensional constraint

    E-Print Network [OSTI]

    Farook Rahaman; Anirudh Pradhan; Nasr Ahmed; Saibal Ray; Bijan Saha; Mosiur Rahaman

    2015-04-14T23:59:59.000Z

    We study different dimensional fluids inspired by noncommutative geometry which admit conformal Killing vectors. The solutions of the Einstein field equations examined specifically for five different set of spacetime. We calculate the active gravitational mass and impose stability conditions of the fluid sphere. The analysis thus carried out immediately indicates that at $4$-dimension only one can get a stable configuration for any spherically symmetric stellar system and any other dimensions, lower or higher, becomes untenable as far as the stability of a system is concerned.

  10. Method and apparatus for chemically altering fluids in continuous flow

    DOE Patents [OSTI]

    Heath, W.O.; Virden, J.W. Jr.; Richardson, R.L.; Bergsman, T.M.

    1993-10-19T23:59:59.000Z

    The present invention relates to a continuous flow fluid reactor for chemically altering fluids. The reactor operates on standard frequency (50 to 60 Hz) electricity. The fluid reactor contains particles that are energized by the electricity to form a corona throughout the volume of the reactor and subsequently a non-equilibrium plasma that interacts with the fluid. Particles may form a fixed bed or a fluid bed. Electricity may be provided through electrodes or through an inductive coil. Fluids include gases containing exhaust products and organic fuels requiring oxidation. 4 figures.

  11. Method and apparatus for chemically altering fluids in continuous flow

    DOE Patents [OSTI]

    Heath, William O. (Richland, WA); Virden, Jr., Judson W. (Richland, WA); Richardson, R. L. (West Richland, WA); Bergsman, Theresa M. (Richland, WA)

    1993-01-01T23:59:59.000Z

    The present invention relates to a continuous flow fluid reactor for chemically altering fluids. The reactor operates on standard frequency (50 to 60 Hz) electricity. The fluid reactor contains particles that are energized by the electricity to form a corona throughout the volume of the reactor and subsequently a non-equilibrium plasma that interacts with the fluid. Particles may form a fixed bed or a fluid bed. Electricity may be provided through electrodes or through an inductive coil. Fluids include gases containing exhaust products and organic fuels requiring oxidation.

  12. Fluid&ParticulateSystems 424514/2010

    E-Print Network [OSTI]

    Zevenhoven, Ron

    /2014 6.1 Fluidised beds, basic features Ĺbo Akademi University - Värme- och Strömningsteknik Biskopsgatan-20500 Ĺbo / Turku Finland 3 Fluidised beds: basics Bubbling fluidised bedBR98 Fluid from each other. The bed has then turned from a packed bed into a fluidised bed. The increased void

  13. Thermal and structural properties of ionic fluids

    E-Print Network [OSTI]

    Hendrik Bartsch; Oliver Dannenmann; Markus Bier

    2015-05-04T23:59:59.000Z

    The electrostatic interaction in ionic fluids is well-known to give rise to a characteristic phase behavior and structure. Sometimes its long range is proposed to single out the electrostatic potential over other interactions with shorter ranges. Here the importance of the range for the phase behavior and the structure of ionic fluids is investigated by means of grandcanonical Monte Carlo simulations of the lattice restricted primitive model (LRPM). The long-ranged electrostatic interaction is compared to various types of short-ranged potentials obtained by sharp and/or smooth cut-off schemes. Sharply cut off electrostatic potentials are found to lead to a strong dependence of the phase behavior and the structure on the cut-off radius. However, when combined with a suitable additional smooth cut-off, the short-ranged LRPM is found to exhibit quantitatively the same phase behavior and structure as the conventional long-ranged LRPM. Moreover, the Stillinger-Lovett perfect screening property, which is well-known to be generated by the long-ranged electrostatic potential, is also fulfilled by short-ranged LRPMs with smooth cut-offs. By showing that the characteristic phase behavior and structure of ionic fluids can also be found in systems with short-ranged potentials, one can conclude that the decisive property of the electrostatic potential in ionic fluids is not the long range but rather the valency dependence.

  14. Accounting for Remaining Injected Fracturing Fluid 

    E-Print Network [OSTI]

    Zhang, Yannan

    2013-12-06T23:59:59.000Z

    The technology of multi-stage fracturing of horizontal wells made the development of shale gas reservoirs become greatly successful during the past decades. A large amount of fracturing fluid, usually from 53,000 bbls to 81,400 bbls, is injected...

  15. Dynamical instability of collapsing radiating fluid

    SciTech Connect (OSTI)

    Sharif, M., E-mail: msharif.math@pu.edu.pk; Azam, M., E-mail: azammath@gmail.com [University of the Punjab, Department of Mathematics (Pakistan)

    2013-06-15T23:59:59.000Z

    We take the collapsing radiative fluid to investigate the dynamical instability with cylindrical symmetry. We match the interior and exterior cylindrical geometries. Dynamical instability is explored at radiative and non-radiative perturbations. We conclude that the dynamical instability of the collapsing cylinder depends on the critical value {gamma} < 1 for both radiative and nonradiative perturbations.

  16. Fluid&ParticulateSystems 424514/2010

    E-Print Network [OSTI]

    Zevenhoven, Ron

    wall thickness m E d c 1 speed of sound in the liquid in tube m/s cwp 0 speed: Internal energy: Kinetic energy: Neglected at non-compressible flow when assuming that the liquid mass: The kinetic energy of the liquid in motion will compress the fluid and expand the pipe (a slightly bigger

  17. Propulsion in a viscoelastic fluid Eric Laugaa

    E-Print Network [OSTI]

    Lauga, Eric

    and a healthy respiratory system.8 Cilia are short flagella which produce fluid motion by means mechanisms and propulsion.9 In the upper respiratory tract, cilia are located in a thin layer of low influenced by viscoelastic stresses. Relevant examples include the ciliary transport of respiratory airway

  18. Accounting for Remaining Injected Fracturing Fluid

    E-Print Network [OSTI]

    Zhang, Yannan

    2013-12-06T23:59:59.000Z

    The technology of multi-stage fracturing of horizontal wells made the development of shale gas reservoirs become greatly successful during the past decades. A large amount of fracturing fluid, usually from 53,000 bbls to 81,400 bbls, is injected...

  19. It's The Fluids SEG Honorary Lecture

    E-Print Network [OSTI]

    .7 A #12;Water + Ions (usually NaCl) ClNa Dickerson et al., 1970 #12;Heavy Oil Water Wet silicaSilica Heavy information please visit: #12;·WATER and BRINE (BRINE = H2O + Salt) ·HYDROCARBONS Oil Gas TYPES of PORE FLUIDS = Porosity = Density sat = 0 (1- ) + f Density: #12;·WATER and BRINE (BRINE = H2O + Salt) ·HYDROCARBONS Oil

  20. Thermodynamics of viscoelastic fluids: the temperature equation.

    E-Print Network [OSTI]

    Wapperom, Peter

    Thermodynamics of viscoelastic fluids: the temperature equation. Peter Wapperom Martien A. Hulsen and Hydrodynamics Rotterdamseweg 145 2628 AL Delft (The Netherlands) Abstract From the thermodynamics with internal. The well- known stress differential models that fit into the thermodynamic theory will be treated

  1. Shear flow instabilities in viscoelastic fluids

    E-Print Network [OSTI]

    Miller, Joel C.

    2006-05-23T23:59:59.000Z

    - stabilities may be desirable: for example in microfluidics it may be necessary 2to mix two fluids together. This is made difficult by the small length scales and resulting low Reynolds number. An instability which mixes the entire flow is needed. Part I...

  2. On rigidly rotating perfect fluid cylinders

    E-Print Network [OSTI]

    B. V. Ivanov

    2002-05-07T23:59:59.000Z

    The gravitational field of a rigidly rotating perfect fluid cylinder with gamma- law equation of state is found analytically. The solution has two parameters and is physically realistic for gamma in the interval (1.41,2]. Closed timelike curves always appear at large distances.

  3. Annulus fluid pressure operated testing valve

    SciTech Connect (OSTI)

    Spencer, H.A. III; Green, R.R.

    1990-12-25T23:59:59.000Z

    This patent describes a fluid pressure controlled apparatus having tubular housing means adapted to be connected to a pipe string and having an axial flow passage extending therethrough from an isolated well formation. Also described is apparatus for opening and closing a well conduit extending to an isolated production formation.

  4. Experimental verification of bifurcation in fluid bearings

    E-Print Network [OSTI]

    Deepak, James Christopher

    1997-01-01T23:59:59.000Z

    The thesis presents the results of the experiments that were conducted on short and long fluid film bearings with a simple single disk rotor. The behavior of the journal was analyzed as function of the rotor system parameters such as the load, speed...

  5. Compressible fluid model for hydrodynamic lubrication cavitation

    E-Print Network [OSTI]

    Sart, Remi

    Compressible fluid model for hydrodynamic lubrication cavitation G. Bayada L. Chupin I.C.J. UMR.chupin@math.univ-bpclermont.fr Keywords: cavitation, compressible Reynolds equation Date: april 2013 Summary In this paper, it is shown how vaporous cavitation in lubricant films can be modelled in a physically justified manner through

  6. The Fluid Mechanics of Carbon Dioxide Sequestration

    E-Print Network [OSTI]

    Huppert, Herbert

    -concentration measurement, the average global temperature of the atmosphere at the surface of the Earth has, Bristol BS2 6BB, United Kingdom 4 BP Institute, Department of Earth Sciences, and Department of Applied.1146/annurev-fluid-011212-140627 Copyright c 2014 by Annual Reviews. All rights reserved Keywords gravity

  7. Using Nanotechnology in Viscoelastic Surfactant Stimulation Fluids 

    E-Print Network [OSTI]

    Gurluk, Merve Rabia 1986-

    2012-11-12T23:59:59.000Z

    USING NANOTECHNOLOGY IN VISCOELASTIC SURFACTANT STIMULATION FLUIDS A Thesis by MERVE RABIA GURLUK Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree... .......................................... 9 1.7 Kinetics of Micellization ......................................................................... 10 1.8 Nanotechnology ....................................................................................... 16...

  8. Recent Developments in Geothermal Drilling Fluids

    SciTech Connect (OSTI)

    Kelsey, J. R.; Rand, P. B.; Nevins, M. J.; Clements, W. R.; Hilscher, L. W.; Remont, L. J.; Matula, G. W.; Balley, D. N.

    1981-01-01T23:59:59.000Z

    In the past, standard drilling muds have been used to drill most geothermal wells. However, the harsh thermal and chemical environment and the unique geothermal formations have led to such problems as excessive thickening of the fluid, formation damage, and lost circulation. This paper describes three recent development efforts aimed at solving some of these drilling fluid problems. Each of the efforts is at a different stage of development. The Sandia aqueous foam studies are still in the laboratory phase, NL Baroid's polymeric deflocculant is soon to be field tested, and the Mudtech high-temperature mud was field tested several months ago. Low density and the capability to suspend particles at low relative velocities are two factors which make foam an attractive drilling fluid. The stability of these foams and their material properties at high temperatures are presently unknown and this lack of information has precluded their use as a geothermal drilling fluid. The aqueous foam studies being conducted at Sandia are aimed at screening available surfactants for temperature and chemical stability. Approximately 100 surfactants have been tested at temperatures of 260 and 310 C (500 and 590 F), and several of these candidates appear very promising. NL Baroid has developed a polymeric deflocculant for water-based muds which shows promise in retarding thermal degradation effects and associated gelation. Formulations containing this new polymer have shown good rheological properties up to 260 C (500 F) in laboratory testing. A high-temperature mud consisting primarily of sepiolite, bentonite, and brown coal has been developed by Mudtech, Inc. A field test of this mud was conducted in a geothermal well in the Imperial Valley of California in May 1980. The fluid exhibited good hole-cleaning characteristics and good rheological properties throughout the test.

  9. Fluid delivery control system | OSTI, US Dept of Energy, Office...

    Office of Scientific and Technical Information (OSTI)

    Fluid delivery control system Re-direct Destination: A method of controlling the delivery of fluid to an engine includes receiving a fuel flow rate signal. An electric pump is...

  10. 2005 Pearson Education South Asia Pte Ltd Applied Fluid Mechanics

    E-Print Network [OSTI]

    Leu, Tzong-Shyng "Jeremy"

    Education South Asia Pte Ltd Applied Fluid Mechanics 17.Drag and Lift 18.Fans, Blowers, Compressors equation to a variety of practical problems. · Compute the power added to a fluid by pumps. #12;3 7

  11. The ramifications of diffusive volume transport in classical fluid mechanics

    E-Print Network [OSTI]

    Bielenberg, James R. (James Ronald), 1976-

    2004-01-01T23:59:59.000Z

    The thesis that follows consists of a collection of work supporting and extending a novel reformulation of fluid mechanics, wherein the linear momentum per unit mass in a fluid continuum, m, is supposed equal to the volume ...

  12. Solution generating theorems: perfect fluid spheres and the TOV equation

    E-Print Network [OSTI]

    Petarpa Boonserm; Matt Visser; Silke Weinfurtner

    2006-09-22T23:59:59.000Z

    We report several new transformation theorems that map perfect fluid spheres into perfect fluid spheres. In addition, we report new ``solution generating'' theorems for the TOV, whereby any given solution can be ``deformed'' to a new solution.

  13. Methods of conveying fluids and methods of sublimating solid particles

    DOE Patents [OSTI]

    Turner, Terry D; Wilding, Bruce M

    2013-10-01T23:59:59.000Z

    A heat exchanger and associated methods for sublimating solid particles therein, for conveying fluids therethrough, or both. The heat exchanger includes a chamber and a porous member having a porous wall having pores in communication with the chamber and with an interior of the porous member. A first fluid is conveyed into the porous member while a second fluid is conveyed into the porous member through the porous wall. The second fluid may form a positive flow boundary layer along the porous wall to reduce or eliminate substantial contact between the first fluid and the interior of the porous wall. The combined first and second fluids are conveyed out of the porous member. Additionally, the first fluid and the second fluid may each be conveyed into the porous member at different temperatures and may exit the porous member at substantially the same temperature.

  14. A controllably adhesive climbing robot using magnetorheological fluid

    E-Print Network [OSTI]

    Wiltsie, Nicholas Eric

    2012-01-01T23:59:59.000Z

    In this thesis, the novel adhesive effects of magnetorheological fluid for use in climbing robotics were experimentally measured and compared to existing cohesive failure fluid models of yield stress adhesion. These models ...

  15. Arrayed microfluidic actuation for active sorting of fluid bed particulates

    E-Print Network [OSTI]

    Gerhardt, Antimony L

    2004-01-01T23:59:59.000Z

    Fluidic actuation offers a facile method to move large quantities of small solids, often referred to as fluid-bed movement. Applications for fluid bed processing are integral to many fields including petrochemical, petroleum, ...

  16. Structure and dynamics of mangetorheological fluids confined in microfluidic devices

    E-Print Network [OSTI]

    Haghgooie, Ramin

    2006-01-01T23:59:59.000Z

    Microfluidic devices and magnetorheological (MR) fluids have been two areas of intense research for several years. Traditionally, these two fields have remained separated from one another by scale. MR fluids are best known ...

  17. Magnetic fluid flow phenomena in DC and rotating magnetic fields

    E-Print Network [OSTI]

    Rhodes, Scott E. (Scott Edward), 1981-

    2004-01-01T23:59:59.000Z

    An investigation of magnetic fluid experiments and analysis is presented in three parts: a study of magnetic field induced torques in magnetorheological fluids, a characterization and quantitative measurement of properties ...

  18. Non-intrusive characterization of heat transfer fluid aerosol formation

    E-Print Network [OSTI]

    Krishna, Kiran

    2001-01-01T23:59:59.000Z

    Heat transfer fluids are widely used in the chemical process industry and are available in a wide range of properties. These fluids are flammable above their flash points and can cause explosions. Though the possibility of aerosol explosions has...

  19. Time-lapse seismic monitoring of subsurface fluid flow

    E-Print Network [OSTI]

    Yuh, Sung H.

    2004-09-30T23:59:59.000Z

    Time-lapse seismic monitoring repeats 3D seismic imaging over a reservoir to map fluid movements in a reservoir. During hydrocarbon production, the fluid saturation, pressure, and temperature of a reservoir change, thereby altering the acoustic...

  20. Book Review Design Patterns in Fluid Construction Grammar

    E-Print Network [OSTI]

    Book Review Design Patterns in Fluid Construction Grammar Luc Steels (editor) Universitat Pompeu Fabra and Sony Computer Science Laboratory, Paris Amsterdam: John Benjamins Publishing Company formalism called Fluid Construction Grammar (FCG) that addresses parsing, production, and learning

  1. A refined volume-of-fluid algorithm for capturing sharp fluid interfaces on arbitrary meshes

    E-Print Network [OSTI]

    Zhang, Di; Jiang, Chunbo; Liang, Dongfang; Chen, Zhengbing; Yang, Yan; Shi, Ying

    2014-06-30T23:59:59.000Z

    conserve mass, and can be easily extended to unstructured meshes and three dimensions, so they are capable of accurately capturing the free surface and modelling merging and fragmentation in multiphase flows. In this article, a new blended high... -tracking method for the computations of multiphase flow. Journal of Computational Physics 2001; 169(2): 708–759. 21 14. Harlow FH, Welch JE. Numerical calculation of time-dependent viscous incompressible flow of fluid with free surface. Physics of Fluids...

  2. Simulation of Complex Fluids using Dissipative Particle Dynamics

    E-Print Network [OSTI]

    Title: Simulation of Complex Fluids using Dissipative Particle Dynamics Abstract: Dissipative Particle Dynamics (DPD) is a relatively new mesoscopic method ...

  3. A General Photonic Crystal Sensing Motif: Creatinine in Bodily Fluids

    E-Print Network [OSTI]

    Asher, Sanford A.

    species present in the bodily fluid such as sugars, urea, uric acid, pyruvate, and dopamine can interfere

  4. Working Fluids and Their Effect on Geothermal Turbines

    Broader source: Energy.gov [DOE]

    DOE Geothermal Program Peer Review 2010 - Presentation. Project objective: Identify new working fluids for binary geothermal plants.

  5. Influence of Viscous and Capillary Forces on Immiscible Fluid...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Abstract: Unstable immiscible fluid displacement in porous media affects geological carbon sequestration, enhanced oil recovery, and groundwater contamination by nonaqueous...

  6. Optimizing drilling performance using a selected drilling fluid

    DOE Patents [OSTI]

    Judzis, Arnis (Salt Lake City, UT); Black, Alan D. (Coral Springs, FL); Green, Sidney J. (Salt Lake City, UT); Robertson, Homer A. (West Jordan, UT); Bland, Ronald G. (Houston, TX); Curry, David Alexander (The Woodlands, TX); Ledgerwood, III, Leroy W. (Cypress, TX)

    2011-04-19T23:59:59.000Z

    To improve drilling performance, a drilling fluid is selected based on one or more criteria and to have at least one target characteristic. Drilling equipment is used to drill a wellbore, and the selected drilling fluid is provided into the wellbore during drilling with the drilling equipment. The at least one target characteristic of the drilling fluid includes an ability of the drilling fluid to penetrate into formation cuttings during drilling to weaken the formation cuttings.

  7. Mesoscale Structures at Complex Fluid-Fluid Interfaces: a Novel Lattice Boltzmann / Molecular Dynamics Coupling

    E-Print Network [OSTI]

    Marcello Sega; Mauro Sbragaglia; Sofia Sergeevna Kantorovich; Alexey Olegovich Ivanov

    2014-02-19T23:59:59.000Z

    Complex fluid-fluid interfaces featuring mesoscale structures with adsorbed particles are key components of newly designed materials which are continuously enriching the field of soft matter. Simulation tools which are able to cope with the different scales characterizing these systems are fundamental requirements for efficient theoretical investigations. In this paper we present a novel simulation method, based on the approach of Ahlrichs and D\\"unweg [Ahlrichs and D\\"unweg, Int. J. Mod. Phys. C, 1998, 9, 1429], that couples the "Shan-Chen" multicomponent Lattice Boltzmann technique to off-lattice molecular dynamics to simulate efficiently complex fluid-fluid interfaces. We demonstrate how this approach can be used to study a wide class of challenging problems. Several examples are given, with an accent on bicontinuous phases formation in polyelectrolyte solutions and ferrofluid emulsions. We also show that the introduction of solvation free energies in the particle-fluid interaction unveils the hidden, multiscale nature of the particle-fluid coupling, allowing to treat symmetrically (and interchangeably) the on-lattice and off-lattice components of the system.

  8. Complex Fluid Analysis with the Advanced Distillation Curve Approach

    E-Print Network [OSTI]

    Complex Fluid Analysis with the Advanced Distillation Curve Approach Thomas J. Bruno, Lisa S. Ott for measuring distillation curves reveals the physicochemical properties of complex fluids such as fuels distillation curves of complex fluids. The distillation curve provides the only practical avenue to assess

  9. Universal penetration test apparatus with fluid penetration sensor

    DOE Patents [OSTI]

    Johnson, Phillip W. (Rochester, MN); Stampfer, Joseph F. (Santa Fe, NM); Bradley, Orvil D. (Santa Fe, NM)

    1999-01-01T23:59:59.000Z

    A universal penetration test apparatus for measuring resistance of a material to a challenge fluid. The apparatus includes a pad saturated with the challenge fluid. The apparatus includes a compression assembly for compressing the material between the pad and a compression member. The apparatus also includes a sensor mechanism for automatically detecting when the challenge fluid penetrates the material.

  10. ME 343 Thermal-Fluid Systems ABET EC2000 syllabus

    E-Print Network [OSTI]

    Ben-Yakar, Adela

    ) 8. Unsteady thermal system modeling, energy storage 9. Software design and development ClassME 343 ­ Thermal-Fluid Systems Page 1 ABET EC2000 syllabus ME 343 ­ Thermal-Fluid Systems Spring thermal and fluid processes are central to function and performance: thermodynamics of nonreacting

  11. Boundary Integral Methods for Multicomponent Fluids and Multiphase Materials

    E-Print Network [OSTI]

    integral methods in two dimensions to multi-component fluid flows and multi-phase problems in materials, and more recently to multi-phase problems in materials science. By multi-fluid or multi-phase we mean systems where the constituitive properties of the fluid or material change abruptly at a dividing

  12. Boundary Integral Methods for Multicomponent Fluids and Multiphase Materials

    E-Print Network [OSTI]

    integral methods in two dimensions to multi­component fluid flows and multi­phase problems in materials, and more recently to multi­phase problems in materials science. By multi­fluid or multi­phase we mean systems where the constituitive properties of the fluid or material change abruptly at a dividing

  13. 2 Geophysical Aspects of Non-Newtonian Fluid Mechanics

    E-Print Network [OSTI]

    Balmforth, Neil

    2 Geophysical Aspects of Non-Newtonian Fluid Mechanics N.J. Balmforth1 and R.V. Craster2 1 research, both for industrial fluid prob- lems and for applications elsewhere, notably geophysically and where this theory might be used in the geophysical contexts. 2.2 Microstructure and Macroscopic Fluid

  14. Viscosity of Quantum Hall Fluids J. E. Avron

    E-Print Network [OSTI]

    Viscosity of Quantum Hall Fluids J. E. Avron Department of Physics, Technion, 32000 Haifa, Israel R April 25, 1997 Abstract The viscosity of quantum fluids with an energy gap at zero temperature is non of the parameter space). For a quantum Hall fluid on two dimensional tori this viscosity is computed. In this case

  15. LITHOLOGY-FLUID INVERSION FROM PRESTACK SEISMIC DATA

    E-Print Network [OSTI]

    Eidsvik, Jo

    LITHOLOGY-FLUID INVERSION FROM PRESTACK SEISMIC DATA MARIT ULVMOEN Department of Mathematical of the study is on lithology-fluid inversion from prestack seismic data in a 3D reservoir. The inversion relates the lithology-fluid classes to elastic variables and the seismic data, and it follows the lines

  16. Lithology-Fluid Inversion based on Prestack Seismic Data

    E-Print Network [OSTI]

    Eidsvik, Jo

    Lithology-Fluid Inversion based on Prestack Seismic Data Marit Ulvmoen Summary The focus of the study is on lithology-fluid inversion from prestack seismic data. The target zone is a 3D reservoir model. The likelihood model relates the lithology-fluid classes to elastic variables and the seismic

  17. March 30, 2009 16:44 Geophysical and Astrophysical Fluid Dynamics gafdbo09 Geophysical and Astrophysical Fluid Dynamics

    E-Print Network [OSTI]

    Al Hanbali, Ahmad

    March 30, 2009 16:44 Geophysical and Astrophysical Fluid Dynamics gafdbo09 Geophysical (geophysical) fluid models: two-dimensional vortical systems in a generalized streamfunction-vorticity rep

  18. A theoretical approach for assessing the role of rock and fluid properties in the development of abnormal fluid pressures

    E-Print Network [OSTI]

    Hastings, Thomas Worcester

    1985-01-01T23:59:59.000Z

    A THEORETICAL APPROACH FOR ASSESSING THE ROLE OF ROCK AND FLUID PROPERTIES IN THE DEVELOPMENT OF ABNORMAL FLUID PRESSURES A Thesis by THOMAS WORCESTER HASTINGS Submitted to the Graduate College of Texas ASM University in partial fulfillment... of the requirement for the degree of MASTER OF SCIENCE December 1985 Major Subject: Geology A THEORETICAL APPROACH FOR ASSESSING THE ROLE OF ROCK AND FLUID PROPERTIES IN THE DEVELOPMENT OF ABNORMAL FLUID PRESSURES A Thesis by THOMAS MORCESTER HASTINGS...

  19. Bioengineering synovial fluid with theoretical and experimental models of the synovial joint

    E-Print Network [OSTI]

    Blewis, Megan E.

    2008-01-01T23:59:59.000Z

    fluid in a biomimetic bioreactor. TERMIS, Submitted, 2008.Bioreactor..of Synovial Fluid: a Bioreactor for Generating Functional

  20. Thermo-fluid Dynamics of Flash Atomizing Sprays and Single Droplet Impacts

    E-Print Network [OSTI]

    Vu, Henry

    2010-01-01T23:59:59.000Z

    OF CALIFORNIA RIVERSIDE Thermo-fluid Dynamics of FlashABSTRACT OF THE DISSERTATION Thermo-fluid Dynamics of Flash

  1. Direct contact, binary fluid geothermal boiler

    DOE Patents [OSTI]

    Rapier, Pascal M. (Richmond, CA)

    1982-01-01T23:59:59.000Z

    Energy is extracted from geothermal brines by direct contact with a working fluid such as isobutane which is immiscible with the brine in a geothermal boiler. The geothermal boiler provides a distributor arrangement which efficiently contacts geothermal brine with the isobutane in order to prevent the entrainment of geothermal brine in the isobutane vapor which is directed to a turbine. Accordingly the problem of brine carry-over through the turbine causes corrosion and scaling thereof is eliminated. Additionally the heat exchanger includes straightening vanes for preventing startup and other temporary fluctuations in the transitional zone of the boiler from causing brine carryover into the turbine. Also a screen is provided in the heat exchanger to coalesce the working fluid and to assist in defining the location of the transitional zone where the geothermal brine and the isobutane are initially mixed.

  2. Removing sulphur oxides from a fluid stream

    DOE Patents [OSTI]

    Katz, Torsten; Riemann, Christian; Bartling, Karsten; Rigby, Sean Taylor; Coleman, Luke James Ivor; Lail, Marty Alan

    2014-04-08T23:59:59.000Z

    A process for removing sulphur oxides from a fluid stream, such as flue gas, comprising: providing a non-aqueous absorption liquid containing at least one hydrophobic amine, the liquid being incompletely miscible with water; treating the fluid stream in an absorption zone with the non-aqueous absorption liquid to transfer at least part of the sulphur oxides into the non-aqueous absorption liquid and to form a sulphur oxide-hydrophobic amine-complex; causing the non-aqueous absorption liquid to be in liquid-liquid contact with an aqueous liquid whereby at least part of the sulphur oxide-hydrophobic amine-complex is hydrolyzed to release the hydrophobic amine and sulphurous hydrolysis products, and at least part of the sulphurous hydrolysis products is transferred into the aqueous liquid; separating the aqueous liquid from the non-aqueous absorption liquid. The process mitigates absorbent degradation problems caused by sulphur dioxide and oxygen in flue gas.

  3. Falsification of dark energy by fluid mechanics

    E-Print Network [OSTI]

    Gibson, Carl H

    2012-01-01T23:59:59.000Z

    The 2011 Nobel Prize in Physics was awarded for the discovery of accelerating supernovae dimness, suggesting a remarkable change in the expansion rate of the Universe from a decrease since the big bang to an increase, driven by anti-gravity forces of a mysterious dark energy material comprising 70% of the Universe mass-energy. Fluid mechanical considerations falsify both the accelerating expansion and dark energy concepts. Kinematic viscosity is neglected in current standard models of self-gravitational structure formation, which rely on cold dark matter CDM condensations and clusterings that are also falsified by fluid mechanics. Weakly collisional CDM particles do not condense but diffuse away. Photon viscosity predicts superclustervoid fragmentation early in the plasma epoch and protogalaxies at the end. At the plasma-gas transition, the plasma fragments into Earth-mass gas planets in trillion planet clumps (proto-globular-star-cluster PGCs). The hydrogen planets freeze to form the dark matter of galaxies ...

  4. Method and apparatus for controlling fluid flow

    DOE Patents [OSTI]

    Miller, J.R.

    1980-06-27T23:59:59.000Z

    A method and apparatus for precisely controlling the rate (and hence amount) of fluid flow are given. The controlled flow rate is finely adjustable, can be extremely small (on the order of microliter-atmospheres per second), can be adjusted to zero (flow stopped), and is stable to better than 1% with time. The dead volume of the valve can be made arbitrarily small, in fact essentially zero. The valve employs no wearing mechanical parts (including springs, stems, or seals). The valve is finely adjustable, has a flow rate dynamic range of many decades, can be made compatible with any fluid, and is suitable for incorporation into an open or closed loop servo-control system.

  5. MOLECULAR DESIGN OF COLLOIDS IN SUPERCRITICAL FLUIDS

    SciTech Connect (OSTI)

    Keith P. Johnston

    2009-04-06T23:59:59.000Z

    The environmentally benign, non-toxic, non-flammable fluids water and carbon dioxide (CO2) are the two most abundant and inexpensive solvents on earth. Emulsions of these fluids are of interest in many industrial processes, as well as CO2 sequestration and enhanced oil recovery. Until recently, formation of these emulsions required stabilization with fluorinated surfactants, which are expensive and often not environmentally friendly. In this work we overcame this severe limitation by developing a fundamental understanding of the properties of surfactants the CO2-water interface and using this knowledge to design and characterize emulsions stabilized with either hydrocarbon-based surfactants or nanoparticle stabilizers. We also discovered a new concept of electrostatic stabilization for CO2-based emulsions and colloids. Finally, we were able to translate our earlier work on the synthesis of silicon and germanium nanocrystals and nanowires from high temperatures and pressures to lower temperatures and ambient pressure to make the chemistry much more accessible.

  6. Thermodynamic $R$-diagrams reveal solid-like fluid states

    E-Print Network [OSTI]

    George Ruppeiner; Peter Mausbach; Helge-Otmar May

    2014-11-11T23:59:59.000Z

    We evaluate the thermodynamic curvature $R$ for fluid argon, hydrogen, carbon dioxide, and water. For these fluids, $R$ is mostly negative, but we also find significant regimes of positive $R$, which we interpret as indicating solid-like fluid properties. Regimes of positive $R$ are present in all four fluids at very high pressure. Water has, in addition, a narrow slab of positive $R$ in the stable liquid phase near its triple point. Also, water is the only fluid we found having $R$ decrease on cooling into the metastable liquid phase, consistent with a possible second critical point.

  7. Low-frequency fluid waves in fractures and pipes

    SciTech Connect (OSTI)

    Korneev, Valeri

    2010-09-01T23:59:59.000Z

    Low-frequency analytical solutions have been obtained for phase velocities of symmetrical fluid waves within both an infinite fracture and a pipe filled with a viscous fluid. Three different fluid wave regimes can exist in such objects, depending on the various combinations of parameters, such as fluid density, fluid viscosity, walls shear modulus, channel thickness, and frequency. Equations for velocities of all these regimes have explicit forms and are verified by comparisons with the exact solutions. The dominant role of fractures in rock permeability at field scales and the strong amplitude and frequency effects of Stoneley guided waves suggest the importance of including these wave effects into poroelastic theories.

  8. Drilling fluids and reserve pit toxicity

    SciTech Connect (OSTI)

    Leuterman, A.J.J.; Jones, F.V.; Chandler, J.E. (M-I Drilling Fluids Co. (US))

    1988-11-01T23:59:59.000Z

    Drilling fluids are now classified as exempt under the Resource Conservation and Recovery Act (RCRA) hazardous waste laws. Since 1986, however, the U.S. Environmental Protection Agency (EPA) has been studying reserve pit contents to determine whether oilfield wastes should continue under this exemption. Concerns regarding reserve pit contents and disposal practices have resulted in state and local governmental regulations that limit traditional methods of construction, closure, and disposal of reserve pit sludge and water. A great deal of attention and study has been focused on drilling fluids that eventually reside in reserve pits. In-house studies show that waste from water-based drilling fluids plays a limited role (if any) in possible hazards associated with reserve pits. Reserve pit water samples and pit sludge was analyzed and collated. Analyses show that water-soluble heavy metals (Cr, Pb, Zn and Mn) in reserve pits are generally undetectable or, if found in the total analysis, are usually bound to clays or organics too tightly to exceed the limitations as determined by the EPA toxicity leachate test. The authors' experience is that most contamination associated with reserve pits involves high salt content from produced waters and/or salt formations, lead contamination from pipe dope, or poorly designed pits, which could allow washouts into surface waters or seepage into groundwater sources. The authors' analyses show that reserve its associated with water-based drilling fluid operations should not be classified as hazardous; however, careful attention attention should be paid to reserve pit construction and closure to help avoid any adverse environmental impact.

  9. Reducing mode circulating fluid bed combustion

    DOE Patents [OSTI]

    Lin, Yung-Yi (Katy, TX); Sadhukhan, Pasupati (Katy, TX); Fraley, Lowell D. (Sugarland, TX); Hsiao, Keh-Hsien (Houston, TX)

    1986-01-01T23:59:59.000Z

    A method for combustion of sulfur-containing fuel in a circulating fluid bed combustion system wherein the fuel is burned in a primary combustion zone under reducing conditions and sulfur captured as alkaline sulfide. The reducing gas formed is oxidized to combustion gas which is then separated from solids containing alkaline sulfide. The separated solids are then oxidized and recycled to the primary combustion zone.

  10. Fluid&ParticulateSystems 424514/2010

    E-Print Network [OSTI]

    Zevenhoven, Ron

    ... 3000 kg/mł gas = 1.2 kg/mł at 20°C, 1 bar (air) N L L H b c 2 Eff d d d p p ( ) 1 1 50 2 d W&ParticulateSystems 424514/2010 Fluid&ParticulateSystems ĹA424514/2014 Separation efficiency )( 27.0 gaspin cgas 50pc w&ParticulateSystems ĹA424514/2014 A "standard" cyclone (Lapple) Lb Lc De Dd W H D S High Conventional High efficiency

  11. Low-melting point heat transfer fluid

    DOE Patents [OSTI]

    Cordaro, Joseph Gabriel (Oakland, CA); Bradshaw, Robert W. (Livermore, CA)

    2010-11-09T23:59:59.000Z

    A low-melting point, heat transfer fluid made of a mixture of five inorganic salts including about 29.1-33.5 mol % LiNO.sub.3, 0-3.9 mol % NaNO.sub.3, 2.4-8.2 mol % KNO.sub.3, 18.6-19.9 mol % NaNO.sub.2, and 40-45.6 mol % KNO.sub.2. These compositions can have liquidus temperatures below 80.degree. C. for some compositions.

  12. The environment of a geomaterial (soil, rock, concrete) determines its susceptibility to failure: grain size distribution and mineralogy, fluid-saturation, pore fluid chemistry, current state of stress, history, the

    E-Print Network [OSTI]

    Borja, Ronaldo I.

    to failure: grain size distribution and mineralogy, fluid-saturation, pore fluid chemistry, current state

  13. Robust processing of optical flow of fluids Ashish Doshi and Adrian G. Bors, Senior Member, IEEE

    E-Print Network [OSTI]

    Bors, Adrian

    the computational fluid dynamics (CFD). Navier-Stokes equations have been extensively studied in fluid mechanics Terms--Optical flow of fluids, computational fluid dy- namics, diffusion, vortex detection I displaying fluid movement. Velocity fields, characterizing the motion of fluids can be modelled using

  14. Well fluid isolation and sample apparatus and method

    DOE Patents [OSTI]

    Schalla, Ronald (Kennewick, WA); Smith, Ronald M. (Richland, WA); Hall, Stephen H. (Kennewick, WA); Smart, John E. (Richland, WA)

    1995-01-01T23:59:59.000Z

    The present invention specifically permits purging and/or sampling of a well but only removing, at most, about 25% of the fluid volume compared to conventional methods and, at a minimum, removing none of the fluid volume from the well. The invention is an isolation assembly that is inserted into the well. The isolation assembly is designed so that only a volume of fluid between the outside diameter of the isolation assembly and the inside diameter of the well over a fluid column height from the bottom of the well to the top of the active portion (lower annulus) is removed. A seal may be positioned above the active portion thereby sealing the well and preventing any mixing or contamination of inlet fluid with fluid above the packer. Purged well fluid is stored in a riser above the packer. Ports in the wall of the isolation assembly permit purging and sampling of the lower annulus along the height of the active portion.

  15. Controlled differential pressure system for an enhanced fluid blending apparatus

    DOE Patents [OSTI]

    Hallman, Jr., Russell Louis (Knoxville, TN)

    2009-02-24T23:59:59.000Z

    A system and method for producing a controlled blend of two or more fluids. Thermally-induced permeation through a permeable tube is used to mix a first fluid from outside the tube with a second fluid flowing through the tube. Mixture ratios may be controlled by adjusting the temperature of the first fluid or by adjusting the pressure drop through the permeable tube. The combination of a back pressure control valve and a differential regulator is used to control the output pressure of the blended fluid. The combination of the back pressure control valve and differential regulator provides superior flow control of the second dry gas. A valve manifold system may be used to mix multiple fluids, and to adjust the volume of blended fluid produced, and to further modify the mixture ratio.

  16. An upgraded heat transfer fluid eliminates odors and leaks

    SciTech Connect (OSTI)

    NONE

    1995-10-01T23:59:59.000Z

    At Morton, persistent leakage of an aromatics-based heat transfer fluid left its mark--a black, oxidized residue at flange and valve locations. By switching to a high-purity fluid from a paraffinic hydrocarbon base stock, the firm eliminated odors and sticky residue, and improved heat transfer. After four years of operation with the paraffinic heat transfer fluid, Morton continues to have no odor problems and virtually no flange or packing leakage. As an added bonus, the heat transfer coefficient of the new fluid allows Morton to operate the systems 10--15 F cooler than when the company used the traditional, aromatic fluid. This has cut fuel use and reduced the potential for thermal damage to the heat transfer fluid, process fluid and process equipment.

  17. Paper C-08, in: V.S. Magar and M.E. Kelley (Eds.), In Situ and On-Site Bioremediation--2003. Proceedings of the Seventh International In Situ and On-Site Bioremediation Symposium (Orlando, FL; June 2003). ISBN 1-57477-139-6, published by

    E-Print Network [OSTI]

    Nerenberg, Robert

    Paper C-08, in: V.S. Magar and M.E. Kelley (Eds.), In Situ and On-Site Bioremediation--2003. Proceedings of the Seventh International In Situ and On-Site Bioremediation Symposium (Orlando, FL; June 2003 and On-Site Bioremediation Symposium, Orlando, Florida, June 2003. PERCHLORATE REDUCTION USING A HOLLOW

  18. Paper A-35, in: V.S. Magar and M.E. Kelley (Eds.), In Situ and On-Site Bioremediation--2003. Proceedings of the Seventh International In Situ and On-Site Bioremediation Symposium (Orlando, FL; June 2003). ISBN 1-57477-139-6, published by

    E-Print Network [OSTI]

    Rockne, Karl J.

    Paper A-35, in: V.S. Magar and M.E. Kelley (Eds.), In Situ and On-Site Bioremediation--2003. Proceedings of the Seventh International In Situ and On-Site Bioremediation Symposium (Orlando, FL; June 2003 washing, or vapor extraction than through bioremediation. Removal of NAPL through solvent extraction would

  19. Solid catalyzed isoparaffin alkylation at supercritical fluid and near-supercritical fluid conditions

    DOE Patents [OSTI]

    Ginosar, Daniel M. (Idaho Falls, ID); Fox, Robert V. (Idaho Falls, ID); Kong, Peter C. (Idaho Falls, ID)

    2000-01-01T23:59:59.000Z

    This invention relates to an improved method for the alkylation reaction of isoparaffins with olefins over solid catalysts including contacting a mixture of an isoparaffin, an olefin and a phase-modifying material with a solid acid catalyst member under alkylation conversion conditions at either supercritical fluid, or near-supercritical fluid conditions, at a temperature and a pressure relative to the critical temperature(T.sub.c) and the critical pressure(P.sub.c) of the reaction mixture. The phase-modifying phase-modifying material is employed to promote the reaction's achievement of either a supercritical fluid state or a near-supercritical state while simultaneously allowing for decreased reaction temperature and longer catalyst life.

  20. Drag Law of Two Dimensional Granular Fluids

    E-Print Network [OSTI]

    Satoshi Takada; Hisao Hayakawa

    2015-04-19T23:59:59.000Z

    Drag force law acting on a moving circular disk in a two-dimensional granular medium is analyzed based on the discrete element method (DEM). It is remarkable that the drag force on the moving disk in moderate dense and pure two-dimensional granular medium can be well reproduced by a perfect fluid with separation from the boundary. A yield force, being independent of the moving speed of the disk, appears if a dry friction between the granular disks and the bottom plate exists. The perfect fluidity is violated in this case. The yield force and the drag force diverge at the jamming point.

  1. ENERGY LANDSCAPE OF 2D FLUID FORMS

    SciTech Connect (OSTI)

    Y. JIANG; ET AL

    2000-04-01T23:59:59.000Z

    The equilibrium states of 2D non-coarsening fluid foams, which consist of bubbles with fixed areas, correspond to local minima of the total perimeter. (1) The authors find an approximate value of the global minimum, and determine directly from an image how far a foam is from its ground state. (2) For (small) area disorder, small bubbles tend to sort inwards and large bubbles outwards. (3) Topological charges of the same sign repel while charges of opposite sign attract. (4) They discuss boundary conditions and the uniqueness of the pattern for fixed topology.

  2. Modular power converter having fluid cooled support

    DOE Patents [OSTI]

    Beihoff, Bruce C.; Radosevich, Lawrence D.; Meyer, Andreas A.; Gollhardt, Neil; Kannenberg, Daniel G.

    2005-09-06T23:59:59.000Z

    A support may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support. The support, in conjunction with other packaging features may form a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as improved terminal configurations. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

  3. Modular power converter having fluid cooled support

    DOE Patents [OSTI]

    Beihoff, Bruce C.; Radosevich, Lawrence D.; Meyer, Andreas A.; Gollhardt, Neil; Kannenberg, Daniel G.

    2005-12-06T23:59:59.000Z

    A support may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support. The support, in conjunction with other packaging features may form a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as improved terminal configurations. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

  4. Automated fluid analysis apparatus and techniques

    DOE Patents [OSTI]

    Szecsody, James E.

    2004-03-16T23:59:59.000Z

    An automated device that couples a pair of differently sized sample loops with a syringe pump and a source of degassed water. A fluid sample is mounted at an inlet port and delivered to the sample loops. A selected sample from the sample loops is diluted in the syringe pump with the degassed water and fed to a flow through detector for analysis. The sample inlet is also directly connected to the syringe pump to selectively perform analysis without dilution. The device is airtight and used to detect oxygen-sensitive species, such as dithionite in groundwater following a remedial injection to treat soil contamination.

  5. Dense, vertical jet in stagnant homogeneous fluid

    E-Print Network [OSTI]

    Vergara, Ignacio

    1977-01-01T23:59:59.000Z

    ~ip t The laboratory equipment for the experiment consisted of a receiving tank, an auxiliary tank for the PreParation of the jet fluid and mixing of the dye, a pumping system, a concentration measurement system and photographic equip- ment. The receiving tank... of ejected brine = 1Os O/Tank capacity Jet or nozzle diamter Total water depth [in model is tank depth (l. 22 m)] Thickness of the dense layer a L the bottom Water depth at the nozzle F2 Fr Negative b Densimetri Accelerati (9. 8 m/sec xDz uoyancy...

  6. Deformation of Silica Aerogel During Fluid Adsorption

    E-Print Network [OSTI]

    Tobias Herman; James Day; John Beamish

    2005-06-30T23:59:59.000Z

    Aerogels are very compliant materials - even small stresses can lead to large deformations. In this paper we present measurements of the linear deformation of high porosity aerogels during adsorption of low surface tension fluids, performed using a Linear Variable Differential Transformer (LVDT). We show that the degree of deformation of the aerogel during capillary condensation scales with the surface tension, and extract the bulk modulus of the gel from the data. Furthermore we suggest limits on safe temperatures for filling and emptying low density aerogels with helium.

  7. Spherically Symmetric Gravitational Collapse of Perfect Fluids

    E-Print Network [OSTI]

    P. D. Lasky; A. W. C. Lun

    2006-10-31T23:59:59.000Z

    Formulating a perfect fluid filled spherically symmetric metric utilizing the 3+1 formalism for general relativity, we show that the metric coefficients are completely determined by the mass-energy distribution, and its time rate of change on an initial spacelike hypersurface. Rather than specifying Schwarzschild coordinates for the exterior of the collapsing region, we let the interior dictate the form of the solution in the exterior, and thus both regions are found to be written in one coordinate patch. This not only alleviates the need for complicated matching schemes at the interface, but also finds a new coordinate system for the Schwarzschild spacetime expressed in generalized Painleve-Gullstrand coordinates.

  8. Downhole Fluid Sampling | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model,DOE FacilityDimondale,South, New Jersey: Energy ResourcesDow KokamDownhole Fluid

  9. Drilling Fluids Market | OpenEI Community

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model,DOE FacilityDimondale,South, New Jersey: EnergyDrewDrilling Fluids Market

  10. Working Fluids: Low Global Warming Potential Refrigerants

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your DensityEnergy U.S.-China Electric VehicleCenters | DepartmentKavitaEnergyWorking Fluids: Low Global

  11. Drill pipe corrosion control using an inert drilling fluid

    SciTech Connect (OSTI)

    Caskey, B.C.; Copass, K.S.

    1981-01-01T23:59:59.000Z

    The results of a geothermal drill pipe corrosion field test are presented. When a low-density drilling fluid was required for drilling a geothermal well because of an underpressured, fractured formation, two drilling fluids were alternately used to compare drill pipe corrosion rates. The first fluid was an air-water mist with corrosion control chemicals. The other fluid was a nitrogen-water mist without added chemicals. The test was conducted during November 1980 at the Baca Location in northern New Mexico. Data from corrosion rings, corrosion probes, fluid samples and flow line instrumentation are plotted for the ten day test period. It is shown that the inert drilling fluid, nitrogen, reduced corrosion rates by more than an order of magnitude. Test setup and procedures are also discussed. Development of an onsite inert gas generator could reduce the cost of drilling geothermal wells by extending drill pipe life and reducing corrosion control chemical costs.

  12. Fluid flow plate for decreased density of fuel cell assembly

    DOE Patents [OSTI]

    Vitale, Nicholas G. (Albany, NY)

    1999-01-01T23:59:59.000Z

    A fluid flow plate includes first and second outward faces. Each of the outward faces has a flow channel thereon for carrying respective fluid. At least one of the fluids serves as reactant fluid for a fuel cell of a fuel cell assembly. One or more pockets are formed between the first and second outward faces for decreasing density of the fluid flow plate. A given flow channel can include one or more end sections and an intermediate section. An interposed member can be positioned between the outward faces at an interface between an intermediate section, of one of the outward faces, and an end section, of that outward face. The interposed member can serve to isolate the reactant fluid from the opposing outward face. The intermediate section(s) of flow channel(s) on an outward face are preferably formed as a folded expanse.

  13. On equivalence of thinning fluids used for hydraulic fracturing

    E-Print Network [OSTI]

    Linkov, Alexander

    2012-01-01T23:59:59.000Z

    The paper aims to answer the question: if and how non-Newtonian fluids may be compared in their mechanical action when used for hydraulic fracturing? By employing the modified formulation of the PKN problem we obtain its simple analytical solutions in the cases of perfectly plastic and Newtonian fluids. Since the results for shear thinning fluids are intermediate between those for these cases, the obtained equation for the fracture length suggests a criterion of the equivalence of various shear thinning fluids for the problem of hydraulic fractures. We assume fluids equivalent in their hydrofracturing action, when at a reference time they produce fractures of the same length. The equation for the fracture length translates the equivalence in terms of the hydraulic fracture length and treatment time into the equivalence in terms of the properties of a fracturing fluid (behavior and consistency indices). Analysis shows that the influence of the consistency and behavior indices on the fracture length, particle v...

  14. Piston-Driven Fluid Ejectors In Silicon Mems

    DOE Patents [OSTI]

    Galambos, Paul C. (Albuquerque, NM); Benavides, Gilbert L. (Los Ranchos, NM); Jokiel, Jr., Bernhard (Albuquerque, NM); Jakubczak II, Jerome F. (Rio Rancho, NM)

    2005-05-03T23:59:59.000Z

    A surface-micromachined fluid-ejection apparatus is disclosed which utilizes a piston to provide for the ejection of jets or drops of a fluid (e.g. for ink-jet printing). The piston, which is located at least partially inside a fluid reservoir, is moveable into a cylindrical fluid-ejection chamber connected to the reservoir by a microelectromechanical (MEM) actuator which is located outside the reservoir. In this way, the reservoir and fluid-ejection chamber can be maintained as electric-field-free regions thereby allowing the apparatus to be used with fluids that are electrically conductive or which may react or break down in the presence of a high electric field. The MEM actuator can comprise either an electrostatic actuator or a thermal actuator.

  15. Methods for separating a fluid, and devices capable of separating a fluid

    DOE Patents [OSTI]

    TeGrotenhuis, Ward E; Humble, Paul H; Caldwell, Dustin D

    2013-05-14T23:59:59.000Z

    Methods and apparatus for separating fluids are disclosed. We have discovered that, surprisingly, providing an open pore structure between a wick and an open flow channel resulted in superior separation performance. A novel and compact integrated device components for conducting separations are also described.

  16. Journal of Fluids and Structures (1996) 10, 395420 FLUID-STRUCTURE INTERACTION AND

    E-Print Network [OSTI]

    Tijsseling, A.S.

    ) The simultaneous occurrence of fluid-structure interaction (FSI) and vaporous cavitation in the transient vibration of freely suspended horizontal pipe systems is investigated by numerical simulation and physical experiment. The study aims at a validated numerical model for combined FSI-cavitation phenomena, which can

  17. Fluid-Rock Characterization and Interactions in NMR Well Logging

    SciTech Connect (OSTI)

    Hirasaki, George J.; Mohanty, Kishore K.

    2003-02-10T23:59:59.000Z

    The objective of this project was to characterize the fluid properties and fluid-rock interactions that are needed for formation evaluation by NMR well logging. The advances made in the understanding of NMR fluid properties are summarized in a chapter written for an AAPG book on NMR well logging. This includes live oils, viscous oils, natural gas mixtures, and the relation between relaxation time and diffusivity.

  18. Entropy production at freeze-out from dissipative fluids

    E-Print Network [OSTI]

    E. Molnar

    2007-09-17T23:59:59.000Z

    Entropy production due to shear viscosity during the continuous freeze-out of a longitudinally expanding dissipative fluid is addressed. Assuming the validity of the fluid dynamical description during the continuous removal of interacting matter we estimated a small entropy production as function of the freeze-out duration and the ratio of dissipative to non-dissipative quantities in case of a relativistic massless pion fluid.

  19. System for Dispensing a Precise Amount of Fluid

    DOE Patents [OSTI]

    Benett, William J. (Livermore, CA); Krulevitch, Peter A. (Pleasanton, CA); Visuri, Steven R. (Livermore, CA); Dzenitis, John M. (Danville, CA); Ness, Kevin D. (Mountain View, CA)

    2008-08-12T23:59:59.000Z

    A dispensing system delivers a precise amount of fluid for biological or chemical processing and/or analysis. Dispensing means moves the fluid. The dispensing means is operated by a pneumatic force. Connection means delivers the fluid to the desired location. An actuator means provides the pneumatic force to the dispensing means. Valving means transmits the pneumatic force from the actuator means to the dispensing means.

  20. Effects of oxygen on fracturing fluids

    SciTech Connect (OSTI)

    Walker, M.L.; Shuchart, C.E.; Yaritz, J.G.; Norman, L.R.

    1995-11-01T23:59:59.000Z

    The stability of polysaccharide gels at high temperature is limited by such factors as pH, mechanical degradation, and oxidants. Oxygen is unavoidably placed in fracturing fluids through dissolution of air. To prevent premature degradation of the fracturing fluid by this oxidant, oxygen scavengers are commonly used. In this paper, the effects of oxygen and various oxygen scavengers on gel stability will be presented. Mechanical removal of oxygen resulted in surprisingly stable fracturing gels at 275 F. However, chemical removal of oxygen gave mixed results. Test data from sodium thiosulfate, sodium sulfite, and sodium erythorbate used as oxygen scavengers/gel stabilizers showed that the efficiency of oxygen removal from gels did not directly coincide with the viscosity retention of the gel, and large excesses of additives were necessary to provide optimum gel stabilization. The inability of some oxygen scavengers to stabilize the gel was the result of products created from the interaction of oxygen with the oxygen scavenger, which in turn, produced species that degraded the gel. The ideal oxygen scavenger should provide superior gel stabilization without creating detrimental side reaction products. Of the materials tested, sodium thiosulfate appeared to be the most beneficial.

  1. Subsidence due to geothermal fluid withdrawal

    SciTech Connect (OSTI)

    Narasimhan, T.N.; Goyal, K.P.

    1982-10-01T23:59:59.000Z

    Single-phase and two-phase geothermal reservoirs are currently being exploited for power production in Italy, Mexico, New Zealand, the U.S. and elsewhere. Vertical ground displacements of upto 4.5 m and horizontal ground displacements of up t o 0.5 m have been observed at Wairakei, New Zealand that are clearly attributable to the resource exploitation. Similarly, vertical displacements of about 0.13 m have been recorded at The Geysers, California. No significant ground displacements that are attributable to large-scale fluid production have been observed at Larderello, Italy and Cerro Prieto, Mexico. Observations show that subsidence due to geothermal fluid production is characterized by such features as an offset of the subsidence bowl from the main area of production, time-lag between production and subsidence and nonlinear stress-strain relationships. Several plausible conceptual models, of varying degrees of sophistication, have been proposed to explain the observed features. At present, relatively more is known about the physical mechanisms that govern subsidence than the relevant therma mechanisms. Although attempts have been made to simulate observed geothermal subsidence, the modeling efforts have been seriously limited by a lack of relevant field data needed to sufficiently characterize the complex field system.

  2. SUBSIDENCE DUE TO GEOTHERMAL FLUID WITHDRAWAL

    SciTech Connect (OSTI)

    Narasimhan, T.N.; Goyal, K.P.

    1982-10-01T23:59:59.000Z

    Single-phase and two-phase geothermal reservoirs are currently being exploited for power production in Italy, Mexico, New Zealand, the U.S. and elsewhere. Vertical ground displacements of upto 4.5 m and horizontal ground displacements of up to 0.5 m have been observed at Wairakei, New Zealand that are clearly attributable to the resource exploitation. Similarly, vertical displacements of about 0.13 m have been recorded at The Geysers, California. No significant ground displacements that are attributable to large-scale fluid production have been observed at Larderello, Italy and Cerro Prieto, Mexico. Observations show that subsidence due to geothermal fluid production is characterized by such features as an offset of the subsidence bowl from the main area of production, time-lag between production and subsidence and nonlinear stress-strain relationships. Several plausible conceptual models, of varying degrees of sophistication, have been proposed to explain the observed features. At present, relatively more is known about the physical mechanisms that govern subsidence than the relevant thermal mechanisms. Although attempts have been made to simulate observed geothermal subsidence, the modeling efforts have been seriously limited by a lack of relevant field data needed to sufficiently characterize the complex field system.

  3. Geothermal fluid genesis in the Great Basin

    SciTech Connect (OSTI)

    Flynn, T.; Buchanan, P.K.

    1990-01-01T23:59:59.000Z

    Early theories concerning geothermal recharge in the Great Basin implied recharge was by recent precipitation. Physical, chemical, and isotopic differences between thermal and non-thermal fluids and global paleoclimatic indicators suggest that recharge occurred during the late Pleistocene. Polar region isotopic studies demonstrate that a depletion in stable light-isotopes of precipitation existed during the late Pleistocene due to the colder, wetter climate. Isotopic analysis of calcite veins and packrat midden megafossils confirm the depletion event occurred in the Great Basin. Isotopic analysis of non-thermal springs is utilized as a proxy for local recent precipitation. Contoured plots of deuterium concentrations from non-thermal and thermal water show a regional, systematic variation. Subtracting contoured plots of non-thermal water from plots of thermal water reveals that thermal waters on a regional scale are generally isotopically more depleted. Isolated areas where thermal water is more enriched than non-thermal water correspond to locations of pluvial Lakes Lahontan and Bonneville, suggesting isotopically enriched lake water contributed to fluid recharge. These anomalous waters also contain high concentrations of sodium chloride, boron, and other dissolved species suggestive of evaporative enrichment. Carbon-age date and isotopic data from Great Basin thermal waters correlate with the polar paleoclimate studies. Recharge occurred along range bounding faults. 151 refs., 62 figs., 15 tabs.

  4. Laser microfluidics: fluid actuation by light

    E-Print Network [OSTI]

    Jean-Pierre Delville; Matthieu Robert De Saint-Vincent; Robert D. Schroll; Hamza Chraibi; B. Issenmann; Régis Wunenburger; Didier Lasseux; Wendy W Zhang; Etienne Brasselet

    2009-03-10T23:59:59.000Z

    The development of microfluidic devices is still hindered by the lack of robust fundamental building blocks that constitute any fluidic system. An attractive approach is optical actuation because light field interaction is contactless and dynamically reconfigurable, and solutions have been anticipated through the use of optical forces to manipulate microparticles in flows. Following the concept of an 'optical chip' advanced from the optical actuation of suspensions, we propose in this survey new routes to extend this concept to microfluidic two-phase flows. First, we investigate the destabilization of fluid interfaces by the optical radiation pressure and the formation of liquid jets. We analyze the droplet shedding from the jet tip and the continuous transport in laser-sustained liquid channels. In the second part, we investigate a dissipative light-flow interaction mechanism consisting in heating locally two immiscible fluids to produce thermocapillary stresses along their interface. This opto-capillary coupling is implemented in adequate microchannel geometries to manipulate two-phase flows and propose a contactless optical toolbox including valves, droplet sorters and switches, droplet dividers or droplet mergers. Finally, we discuss radiation pressure and opto-capillary effects in the context of the 'optical chip' where flows, channels and operating functions would all be performed optically on the same device.

  5. Recent developments in geothermal drilling fluids

    SciTech Connect (OSTI)

    Kelsey, J.R.; Rand, P.B.; Nevins, M.J.; Clements, W.R.; Hilscher, L.W.; Remont, L.J.; Matula, G.W.; Bailey, D.N.

    1981-01-01T23:59:59.000Z

    Three recent development efforts are described, aimed at solving some of these drilling fluid problems. The Sandia aqueous foam studies are still in the laboratory phase; NL Baroid's polymeric deflocculant is being field tested; and the Mudtech high temperature mud was field tested several months ago. The aqueous foam studies are aimed at screening available surfactants for temperture and chemical stability. Approximately 100 surfactants have been tested at temperatures of 260/sup 0/C and 310/sup 0/C and several of these candidates appear very promising. A polymeric deflocculant was developed for water-based muds which shows promise in laboratory tests of retarding thermal degradation effects and associated gelation. Formulations containing this new polymer have shown good rheological properties up to 500/sup 0/F. A high temperature mud consisting primarily of sepiolite, bentonite, and brown coal has been developed. A field test of this mud was conducted in a geothermal well in the Imperial Valley of California in May of last year. The fluid exhibited good hole-cleaning characteristics and good rheological properties throughout the test. (MHR)

  6. Meso-scale turbulence in living fluids

    E-Print Network [OSTI]

    Henricus H. Wensink; Jörn Dunkel; Sebastian Heidenreich; Knut Drescher; Raymond E. Goldstein; Hartmut Löwen; Julia M. Yeomans

    2012-08-21T23:59:59.000Z

    Turbulence is ubiquitous, from oceanic currents to small-scale biological and quantum systems. Self-sustained turbulent motion in microbial suspensions presents an intriguing example of collective dynamical behavior amongst the simplest forms of life, and is important for fluid mixing and molecular transport on the microscale. The mathematical characterization of turbulence phenomena in active non-equilibrium fluids proves even more difficult than for conventional liquids or gases. It is not known which features of turbulent phases in living matter are universal or system-specific, or which generalizations of the Navier-Stokes equations are able to describe them adequately. Here, we combine experiments, particle simulations, and continuum theory to identify the statistical properties of self-sustained meso-scale turbulence in active systems. To study how dimensionality and boundary conditions affect collective bacterial dynamics, we measured energy spectra and structure functions in dense Bacillus subtilis suspensions in quasi-2D and 3D geometries. Our experimental results for the bacterial flow statistics agree well with predictions from a minimal model for self-propelled rods, suggesting that at high concentrations the collective motion of the bacteria is dominated by short-range interactions. To provide a basis for future theoretical studies, we propose a minimal continuum model for incompressible bacterial flow. A detailed numerical analysis of the 2D case shows that this theory can reproduce many of the experimentally observed features of self-sustained active turbulence.

  7. alkaline fluids released: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    is a coarse- to medium-grained rock that occurs Bodnar, Robert J. 2 New Tracers Identify Hydraulic Fracturing Fluids and Accidental Releases from Oil and Gas Operations...

  8. amniotic fluid index: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Fluid Flows Physics (arXiv) Summary: Dow Jones Index time series exhibit irregular or fractal fluctuations on all time scales from days, months to years. The nonlinear...

  9. ascitic fluid analysis: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to quantify the randomness degree in river flow time series of two mountain rivers in Bosnia and Herzegovina, representing the turbulent environmental fluid, for the period...

  10. Sandia Energy - Computational Fluid Dynamics & Large-Scale Uncertainty...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    & Large-Scale Uncertainty Quantification for Wind Energy Home Highlights - HPC Computational Fluid Dynamics & Large-Scale Uncertainty Quantification for Wind Energy Previous Next...

  11. Thermodynamic perturbation theory for associating fluids: Beyond first order

    E-Print Network [OSTI]

    B. D. Marshall

    2014-05-07T23:59:59.000Z

    This document outlines the development of numerous new theoretical approaches to model associating fluids. For a detailed abstract please see page ii.

  12. Evaluation of subsurface fracture geometry using fluid pressure...

    Open Energy Info (EERE)

    subsurface fracture geometry using fluid pressure response to solid earth tidal strain Jump to: navigation, search OpenEI Reference LibraryAdd to library Report: Evaluation of...

  13. Methods and systems for integrating fluid dispensing technology with stereolithography

    DOE Patents [OSTI]

    Medina, Francisco (El Paso, TX); Wicker, Ryan (El Paso, TX); Palmer, Jeremy A. (Albuquerque, NM); Davis, Don W. (Albuquerque, NM); Chavez, Bart D. (Albuquerque, NM); Gallegos, Phillip L. (Albuquerque, NM)

    2010-02-09T23:59:59.000Z

    An integrated system and method of integrating fluid dispensing technologies (e.g., direct-write (DW)) with rapid prototyping (RP) technologies (e.g., stereolithography (SL)) without part registration comprising: an SL apparatus and a fluid dispensing apparatus further comprising a translation mechanism adapted to translate the fluid dispensing apparatus along the Z-, Y- and Z-axes. The fluid dispensing apparatus comprises: a pressurized fluid container; a valve mechanism adapted to control the flow of fluid from the pressurized fluid container; and a dispensing nozzle adapted to deposit the fluid in a desired location. To aid in calibration, the integrated system includes a laser sensor and a mechanical switch. The method further comprises building a second part layer on top of the fluid deposits and optionally accommodating multi-layered circuitry by incorporating a connector trace. Thus, the present invention is capable of efficiently building single and multi-material SL fabricated parts embedded with complex three-dimensional circuitry using DW.

  14. Mass-Conserved Phase Field Models for Binary Fluids

    E-Print Network [OSTI]

    2012-07-13T23:59:59.000Z

    The commonly used incompressible phase field models for non-reactive, bi- nary fluids, in which the Cahn-Hilliard equation is used for the transport of phase.

  15. Finite Element Methods for Nonlinear Acoustics in Fluids

    E-Print Network [OSTI]

    The non- linear terms in these wave equations imply that the sound speed ... ics, the finite element formulation of nonlinear acoustic equations for fluids has.

  16. Effective viscoelastic medium from fractured fluid-saturated ...

    E-Print Network [OSTI]

    2013-02-27T23:59:59.000Z

    ... to Comput. Methods Appl. Mech. Engrg. 27 February 2013 ... where ? is the fluid viscosity and k the absolute permeability. S is known as the structure or ...

  17. Helium measurements of pore-fluids obtained from SAFOD drillcore

    E-Print Network [OSTI]

    Ali, S.

    2010-01-01T23:59:59.000Z

    al. ) released during drilling and well samples (Source 3:mud gas analyses during drilling, a well known monitoringin the well fluid samples recovered during SAFOD drilling

  18. Isotopic Analysis- Fluid At Roosevelt Hot Springs Geothermal...

    Open Energy Info (EERE)

    Details Location Roosevelt Hot Springs Geothermal Area Exploration Technique Isotopic Analysis- Fluid Activity Date 1981 - 1981 Usefulness useful DOE-funding Unknown Exploration...

  19. Fluid Inclusion Analysis At Valles Caldera - Sulphur Springs...

    Open Energy Info (EERE)

    Sasada & Goff, 1995) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Fluid Inclusion Analysis At Valles Caldera - Sulphur Springs Geothermal Area...

  20. Isotopic Analysis- Fluid At Indian Valley Hot Springs Geothermal...

    Open Energy Info (EERE)

    Activity: Isotopic Analysis- Fluid At Indian Valley Hot Springs Geothermal Area (1990) Exploration Activity Details Location Indian Valley Hot Springs Geothermal Area...

  1. Fluid Circulation and Heat Extraction from Engineered Geothermal...

    Open Energy Info (EERE)

    A large amount of fluid circulation and heat extraction (i.e., thermal power production) research and testing has been conducted on engineered geothermal reservoirs in the...

  2. Numerical simulation of two-phase fluid flow

    E-Print Network [OSTI]

    2013-01-30T23:59:59.000Z

    diffusive wave (see also Carcione, 2007). Hence, fluid flow and pressure diffusion are phenomena described by the same differential equation. In hydrology and ...

  3. aiaa theoretical fluid: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Laboratory Mechanical Engineering Dept. University of Kentucky 31st AIAA Fluid circuit heat transfer effectiveness and pressure loss in turbine blade M.S. student; member AIAA...

  4. FLUID INCLUSION STRATIGRAPHY: NEW METHOD FOR GEOTHERMAL RESERVOIR...

    Open Energy Info (EERE)

    ASSESSMENT PRELIMINARY RESULTS Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Proceedings: FLUID INCLUSION STRATIGRAPHY: NEW METHOD FOR GEOTHERMAL...

  5. Integrated mineralogical and fluid inclusion study of the Coso...

    Open Energy Info (EERE)

    geothermal systems, California Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Proceedings: Integrated mineralogical and fluid inclusion study of the...

  6. FLUID GEOCHEMISTRY AT THE RAFT RIVER GEOTHERMAL FIELD, IDAHO...

    Open Energy Info (EERE)

    HYDROGEOLOGICAL IMPLICATIONS Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Proceedings: FLUID GEOCHEMISTRY AT THE RAFT RIVER GEOTHERMAL FIELD,...

  7. Characterization of past hydrothermal fluids in the Humboldt...

    Open Energy Info (EERE)

    studies of core samples Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: Characterization of past hydrothermal fluids in the Humboldt...

  8. Future Engine Fluids Technologies: Durable, Fuel-Efficient, and...

    Office of Environmental Management (EM)

    Engine Fluids Technologies: Durable, Fuel-Efficient, and Emissions-Friendly 2005 Diesel Engine Emissions Reduction (DEER) Conference Presentations and Posters...

  9. A Mixed Finite Element Framework for Modeling Coupled Fluid Flow ...

    E-Print Network [OSTI]

    Birendra Jha

    2005-10-03T23:59:59.000Z

    and in enhanced oil recovery techniques such as steam assisted gravity ..... When fluid flows through a porous medium there are three forces acting, per unit.

  10. Isotopic Analysis- Fluid At Long Valley Caldera Geothermal Area...

    Open Energy Info (EERE)

    Farrar, Et Al., 2003) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Isotopic Analysis- Fluid At Long Valley Caldera Geothermal Area (Farrar, Et...

  11. Fluid Inclusion Stratigraphy: Interpretation of New Wells in...

    Open Energy Info (EERE)

    Coso Geothermal Field Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Proceedings: Fluid Inclusion Stratigraphy: Interpretation of New Wells in the...

  12. CHARACTERIZATION OF MACAQUE PULMONARY FLUID PROTEOME DURING MONKEYPOX...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    levels persisted for other proteins, including Vitamin-D-binding protein and fibrinogen gamma. Structural and metabolic proteins were substantially decreased in lung fluid...

  13. Fluid Inclusion Analysis At International Geothermal Area Mexico...

    Open Energy Info (EERE)

    fields; hence fluid-flow plots as presented here can be accomplished with little cost. Gas analytical data, therefore, are useful in developing management procedures for...

  14. Wave motions in unbounded poroelastic solids infused with compressible fluids

    E-Print Network [OSTI]

    Quiligotti, S; dell'Isola, F

    2010-01-01T23:59:59.000Z

    Looking at rational solid-fluid mixture theories in the context of their biomechanical perspectives, this work aims at proposing a two-scale constitutive theory of a poroelastic solid infused with an inviscid compressible fluid. The propagation of steady-state harmonic plane waves in unbounded media is investigated in both cases of unconstrained solid-fluid mixtures and fluid-saturated poroelastic solids. Relevant effects on the resulting characteristic speed of longitudinal and transverse elastic waves, due to the constitutive parameters introduced, are finally highlighted and discussed.

  15. Isotopic Analysis- Fluid At Long Valley Caldera Geothermal Area...

    Open Energy Info (EERE)

    Gerlach, 1983) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Isotopic Analysis- Fluid At Long Valley Caldera Geothermal Area (Taylor & Gerlach,...

  16. A Fluid-Inclusion Investigation Of The Tongonan Geothermal Field...

    Open Energy Info (EERE)

    Inclusion Investigation Of The Tongonan Geothermal Field, Philippines Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article: A Fluid-Inclusion...

  17. Isotopic Composition of Carbon in Fluids from the Long Valley...

    Open Energy Info (EERE)

    Isotopic Composition of Carbon in Fluids from the Long Valley Geothermal System, California, In- Proceedings of the Second Workshop on Hydrologic and Geochemical Monitoring in the...

  18. Fluid Inclusion Stratigraphy Interpretation of New Wells in the...

    Open Energy Info (EERE)

    hypothesis is that selected gaseous species and species ratios can differentiate groundwater and reservoir fluid-bearing fractures, and can indicate reservoir seals. Analyses...

  19. amniotic fluid levels: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Validation of a Computational Fluid Dynamics Model for IAQ applications in Ice Rink Arenas Engineering Websites Summary: . A major source of air pollution is the...

  20. Microfluidic and Nanofluidic Cavities for Quantum Fluids Experiments

    E-Print Network [OSTI]

    Duh, A; Hauer, B D; Saeedi, R; Kim, P H; Biswas, T S; Davis, J P

    2011-01-01T23:59:59.000Z

    Many areas of science are taking advantage of the advances made possible using microfabrication and nanofabrication. But research into quantum fluids in confined geometries has largely focused on macroscopic devices, like carefully separated plates, or porous media. This is unfortunate since the relevant length scales in quantum fluids, 3He in particular, are comparable to those possible using microfluidic and nanofluidic devices. Here we present devices fabricated specifically for quantum fluids research, with cavity sizes ranging from 30 nm to 11 microns deep. We present characterization of these devices and their usefulness for quantum fluids experiments.

  1. Monitoring and Modeling Fluid Flow in a Developing EGS Reservoir...

    Broader source: Energy.gov (indexed) [DOE]

    model fluid injection into a tight reservoir on the edges of a hydrothermal field. Use seismic data to constrain geomechanicalhydrologicthermal model of reservoir....

  2. Monitoring and Modeling Fluid Flow in a Developing Enhanced Geothermal...

    Broader source: Energy.gov (indexed) [DOE]

    fluid injection into a tight reservoir on the edges of a hydrothermal field; to use seismic data to constrain geomechanicalhydrologicthermal model of reservoir; to model for...

  3. Monitoring and Modeling Fluid Flow in a Developing EGS Reservoir

    Broader source: Energy.gov (indexed) [DOE]

    fluid injection into a tight reservoir on the edges of a hydrothermal field * Use seismic data to constrain geomechanicalhydrologicthermal model of reservoir * Model for...

  4. Binary non-additive hard sphere mixtures: Fluid demixing, asymptotic decay of correlations and free fluid interfaces

    E-Print Network [OSTI]

    Paul Hopkins; Matthias Schmidt

    2010-07-29T23:59:59.000Z

    Using a fundamental measure density functional theory we investigate both bulk and inhomogeneous systems of the binary non-additive hard sphere model. For sufficiently large (positive) non-additivity the mixture phase separates into two fluid phases with different compositions. We calculate bulk fluid-fluid coexistence curves for a range of size ratios and non-additivity parameters and find that they compare well to simulation results from the literature. Using the Ornstein-Zernike equation, we investigate the asymptotic, r->infinity, decay of the partial pair correlation functions, g_ij(r). At low densities there occurs a structural crossover in the asymptotic decay between two different damped oscillatory modes with different wavelengths corresponding to the two intra-species hard core diameters. On approaching the fluid-fluid critical point there is Fisher-Widom crossover from exponentially damped oscillatory to monotonic asymptotic decay. Using the density functional we calculate the density profiles for the planar free fluid-fluid interface between coexisting fluid phases. We show that the type of asymptotic decay of g_ij(r) not only determines the asymptotic decay of the interface profiles, but is also relevant for intermediate and even short-ranged behaviour. We also determine the surface tension of the free fluid interface, finding that it increases with non-additivity, and that on approaching the critical point mean-field scaling holds.

  5. Flow of fractal fluid in pipes: Non-integer dimensional space Vasily E. Tarasov

    E-Print Network [OSTI]

    Tarasov, Vasily E.

    Flow of fractal fluid in pipes: Non-integer dimensional space approach Vasily E. Tarasov of an incompressible viscous fractal fluid in the pipe. Fractal fluid is described as a continuum in non solution for steady flow of fractal fluid in a pipe and corresponding fractal fluid discharge are suggested

  6. Quartz resonator fluid density and viscosity monitor

    DOE Patents [OSTI]

    Martin, Stephen J. (Albuquerque, NM); Wiczer, James J. (Albuquerque, NM); Cernosek, Richard W. (Albuquerque, NM); Frye, Gregory C. (Cedar Crest, NM); Gebert, Charles T. (Albuquerque, NM); Casaus, Leonard (Bernalillo, NM); Mitchell, Mary A. (Tijeras, NM)

    1998-01-01T23:59:59.000Z

    A pair of thickness-shear mode resonators, one smooth and one with a textured surface, allows fluid density and viscosity to be independently resolved. A textured surface, either randomly rough or regularly patterned, leads to trapping of liquid at the device surface. The synchronous motion of this trapped liquid with the oscillating device surface allows the device to weigh the liquid; this leads to an additional response that depends on liquid density. This additional response enables a pair of devices, one smooth and one textured, to independently resolve liquid density and viscosity; the difference in responses determines the density while the smooth device determines the density-viscosity product, and thus, the pair determines both density and viscosity.

  7. Using supercritical fluids to refine hydrocarbons

    DOE Patents [OSTI]

    Yarbro, Stephen Lee

    2014-11-25T23:59:59.000Z

    This is a method to reactively refine hydrocarbons, such as heavy oils with API gravities of less than 20.degree. and bitumen-like hydrocarbons with viscosities greater than 1000 cp at standard temperature and pressure using a selected fluid at supercritical conditions. The reaction portion of the method delivers lighter weight, more volatile hydrocarbons to an attached contacting device that operates in mixed subcritical or supercritical modes. This separates the reaction products into portions that are viable for use or sale without further conventional refining and hydro-processing techniques. This method produces valuable products with fewer processing steps, lower costs, increased worker safety due to less processing and handling, allow greater opportunity for new oil field development and subsequent positive economic impact, reduce related carbon dioxide, and wastes typical with conventional refineries.

  8. Thermally matched fluid cooled power converter

    DOE Patents [OSTI]

    Radosevich, Lawrence D.; Kannenberg, Daniel G.; Kaishian, Steven C.; Beihoff, Bruce C.

    2005-06-21T23:59:59.000Z

    A thermal support may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support. Power electronic circuits are thermally matched, such as between component layers and between the circuits and the support. The support may form a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as improved terminal configurations. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

  9. Power converter having improved fluid cooling

    DOE Patents [OSTI]

    Meyer, Andreas A.; Radosevich, Lawrence D.; Beihoff, Bruce C.; Kehl, Dennis L.; Kannenberg, Daniel G.

    2007-03-06T23:59:59.000Z

    A thermal support may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support, which may be controlled in a closed-loop manner. Interfacing between circuits, circuit mounting structure, and the support provide for greatly enhanced cooling. The support may form a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as improved terminal configurations. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

  10. Immobilized fluid membranes for gas separation

    DOE Patents [OSTI]

    Liu, Wei; Canfield, Nathan L; Zhang, Jian; Li, Xiaohong Shari; Zhang, Jiguang

    2014-03-18T23:59:59.000Z

    Provided herein are immobilized liquid membranes for gas separation, methods of preparing such membranes and uses thereof. In one example, the immobilized membrane includes a porous metallic host matrix and an immobilized liquid fluid (such as a silicone oil) that is immobilized within one or more pores included within the porous metallic host matrix. The immobilized liquid membrane is capable of selective permeation of one type of molecule (such as oxygen) over another type of molecule (such as water). In some examples, the selective membrane is incorporated into a device to supply oxygen from ambient air to the device for electrochemical reactions, and at the same time, to block water penetration and electrolyte loss from the device.

  11. Turbulence and turbulent mixing in natural fluids

    E-Print Network [OSTI]

    Gibson, Carl H

    2010-01-01T23:59:59.000Z

    Turbulence and turbulent mixing in natural fluids begins with big bang turbulence powered by spinning combustible combinations of Planck particles and Planck antiparticles. Particle prograde accretion on a spinning pair releases 42% of the particle rest mass energy to produce more fuel for turbulent combustion. Negative viscosity and negative turbulence stresses work against gravity, creating mass-energy and space-time from the vacuum. Turbulence mixes cooling temperatures until a quark-gluon strong-force SF freeze-out. Gluon-viscosity anti-gravity ({\\Lambda}SF) exponentially inflates the fireball to preserve big bang turbulence information at scales larger than ct as the first fossil turbulence. Cosmic microwave background CMB temperature anisotropies show big bang turbulence fossils along with fossils of weak plasma turbulence triggered (10^12 s) as plasma viscous forces permit gravitational fragmentation on supercluster to galaxy mass scales (10^13 s). Turbulent morphologies and viscous-turbulent lengths a...

  12. Low-melting point heat transfer fluid

    DOE Patents [OSTI]

    Cordaro, Joseph G. (Oakland, CA); Bradshaw, Robert W. (Livermore, CA)

    2011-04-12T23:59:59.000Z

    A low-melting point, heat transfer fluid comprising a mixture of LiNO.sub.3, NaNO.sub.3, KNO.sub.3, NaNO.sub.2 and KNO.sub.2 salts where the Li, Na and K cations are present in amounts of about 20-33.5 mol % Li, about 18.6-40 mol % Na, and about 40-50.3 mol % K and where the nitrate and nitrite anions are present in amounts of about 36-50 mol % NO.sub.3, and about 50-62.5 mol % NO.sub.2. These compositions can have liquidus temperatures between 70.degree. C. and 80.degree. C. for some compositions.

  13. ASTROPHYSICAL FLUID DYNAMICS VIA DIRECT STATISTICAL SIMULATION

    SciTech Connect (OSTI)

    Tobias, S. M. [Department of Applied Mathematics, University of Leeds, Leeds LS2 9JT (United Kingdom); Dagon, K.; Marston, J. B., E-mail: smt@maths.leeds.ac.uk [Department of Physics, Brown University, Providence, RI 02912-1843 (United States)

    2011-02-01T23:59:59.000Z

    In this paper, we introduce the concept of direct statistical simulation for astrophysical flows. This technique may be appropriate for problems in astrophysical fluids where the instantaneous dynamics of the flows are of secondary importance to their statistical properties. We give examples of such problems including mixing and transport in planets, stars, and disks. The method is described for a general set of evolution equations, before we consider the specific case of a spectral method optimized for problems on a spherical surface. The method is illustrated for the simplest non-trivial example of hydrodynamics and magnetohydrodynamics on a rotating spherical surface. We then discuss possible extensions of the method both in terms of computational methods and the range of astrophysical problems that are of interest.

  14. Acoustic sand detector for fluid flowstreams

    DOE Patents [OSTI]

    Beattie, Alan G. (Corrales, NM); Bohon, W. Mark (Frisco, TX)

    1993-01-01T23:59:59.000Z

    The particle volume and particle mass production rate of particulate solids entrained in fluid flowstreams such as formation sand or fracture proppant entrained in oil and gas production flowstreams is determined by a system having a metal probe interposed in a flow conduit for transmitting acoustic emissions created by particles impacting the probe to a sensor and signal processing circuit which produces discrete signals related to the impact of each of the particles striking the probe. The volume or mass flow rate of particulates is determined from making an initial particle size distribution and particle energy distribution and comparing the initial energy distribution and/or the initial size distribution with values related to the impact energies of a predetermined number of recorded impacts. The comparison is also used to recalibrate the system to compensate for changes in flow velocity.

  15. 2005 Pearson Education South Asia Pte Ltd Applied Fluid Mechanics

    E-Print Network [OSTI]

    Leu, Tzong-Shyng "Jeremy"

    Education South Asia Pte Ltd Applied Fluid Mechanics 17.Drag and Lift 18.Fans, Blowers, Compressors-Momentum Equation 4. Problem-Solving Method Using the Force Equations 5. Forces on Stationary Objects 6. Forces Pearson Education South Asia Pte Ltd 16.2 Force Equation · In fluid flow problems, a continuous flow

  16. Fundamental studies of fluid mechanics and stability in porous media

    SciTech Connect (OSTI)

    Homsy, G.M.

    1991-08-01T23:59:59.000Z

    This report summarizes accomplished and proposed work for the fundamental studies of fluid mechanics and stability in porous media. Topics discussed include: viscous fingering in miscible displacements; polymer flow interactions in free shear layers of viscoelastic fluids; effect of nonmonotonic viscosity profiles on the stability of miscible displacements in porous media; and references. (JL)

  17. Fluid management plan for the Project Shoal Area Offsites Subproject

    SciTech Connect (OSTI)

    NONE

    1996-08-01T23:59:59.000Z

    The US Department of Energy, Nevada Operations Office (DOE/NV) has initiated the Offsites Subproject to characterize the hazards posed to human health and the environment as a result of underground nuclear testing activities at facilities other than the Nevada Test Site (NTS). A primary Subproject objective is to gather adequate data to characterize the various Subproject sites through the collection of surface and subsurface soil samples and by drilling several wells for the collection of groundwater data. The Project Shoal Area (PSA) is one of the Subproject`s Nevada sites and is subject to the requirements set forth in the Federal Facility Compliance Agreement and Consent Order (FFACO) (DOE, 1996a). In accordance with the FFACO, a Corrective Action Investigation Plan (CAIP) has been developed for work at the PSA (designated as Corrective Action Unit Number 416). This Fluid Management Plan (FMP) provides guidance for the management of fluids generated from wells constructed at the PSA. Long-term monitoring and future activities at the site, if required, will be set forth in additional documents as required by the FFACO. The ultimate method for disposition of fluids generated by site operations depends upon sample analysis and process knowledge in relation to fluid management criteria. Section 2 describes well site operations; Section 3 discusses fluid management criteria; Section 4 includes the fluid monitoring program; Section 5 presents the fluid management strategy; Section 6 provides for fluid management during routine well monitoring; and Section 7 contains reporting criteria.

  18. antonio fluid dynamics: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    antonio fluid dynamics First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 39th AIAA Fluid Dynamics...

  19. PARAMETER AND SYSTEM IDENTIFICATION FOR FLUID FLOW IN UNDERGROUND RESERVOIRS

    E-Print Network [OSTI]

    Ewing, Richard E.

    associated with two seem­ ingly disparate applications: production of petroleum and the remediation of water procedures associated with injection and production wells. Equations to describe the flow of fluids in porous. Such data can include pressure and flow rates of various fluid phases obtained during production, or during

  20. PASSIVE CONTROL OF FLUID POWERED HUMAN POWER AMPLIFIERS

    E-Print Network [OSTI]

    Li, Perry Y.

    PASSIVE CONTROL OF FLUID POWERED HUMAN POWER AMPLIFIERS Perry Y. Li and Venkat Durbha Center is proposed for the control of fluid powered human power amplifiers. Human power amplifiers are mechanical as a torque/force source. The control objective is to amplify the power that the human exerts on the machine

  1. On the multipole moments of a rigidly rotating fluid body

    E-Print Network [OSTI]

    Robert Filter; Andreas Kleinwächter

    2009-02-11T23:59:59.000Z

    Based on numerical simulations and analytical calculations we formulate a new conjecture concerning the multipole moments of a rigidly rotating fluid body in equilibrium. The conjecture implies that the exterior region of such a fluid is not described by the Kerr metric.

  2. Thermodynamic Micellization Model of Asphaltene Precipitation from Petroleum Fluids

    E-Print Network [OSTI]

    Firoozabadi, Abbas

    Thermodynamic Micellization Model of Asphaltene Precipitation from Petroleum Fluids Alexey I A thermodynamicmicellization model is proposed for the description of asphaltene precipitationfrom petroleum fluids and the onset of predicted asphaltene precipitation are sensitive to the amount of resins in the crude

  3. Title of dissertation: MODELING, SIMULATING, AND CONTROLLING THE FLUID DYNAMICS

    E-Print Network [OSTI]

    Shapiro, Benjamin

    ABSTRACT Title of dissertation: MODELING, SIMULATING, AND CONTROLLING THE FLUID DYNAMICS OF ELECTRO an algorithm to steer indi- vidual particles inside the EWOD system by control of actuators already present number of actuators available in the EWOD system. #12;MODELING, SIMULATING, AND CONTROLLING THE FLUID

  4. Controllable magneto-rheological fluid-based dampers for drilling

    DOE Patents [OSTI]

    Raymond, David W. (Edgewood, NM); Elsayed, Mostafa Ahmed (Youngsville, LA)

    2006-05-02T23:59:59.000Z

    A damping apparatus and method for a drillstring comprising a bit comprising providing to the drillstring a damping mechanism comprising magnetorheological fluid and generating an electromagnetic field affecting the magnetorheological fluid in response to changing ambient conditions encountered by the bit.

  5. Molecular simulations of supercritical fluid permeation through disordered microporous

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    and wastewater treatment,? gas separation,? energy storage,? carbon dioxide sequestration or gas production fromMolecular simulations of supercritical fluid permeation through disordered microporous carbons, FRANCE E-mail: botan@mit.edu Abstract Fluid transport through microporous carbon-based materials

  6. Ris-P.-715(EN) Optics and Fluid Dynamics

    E-Print Network [OSTI]

    Risř-P.-715(EN) Optics and Fluid Dynamics Department Annual Progress Report for 1993 Edited by S Research in the Optics and Fluid Dynamics Department is performed within the following two programme areas: optics and continuum physics. In optics the activities are within (a) optical materials, (b) quasi

  7. Ris-R-1314(EN) Optics and Fluid Dynamics

    E-Print Network [OSTI]

    Risř-R-1314(EN) Optics and Fluid Dynamics Department Annual Progress Report for 2001 Edited by H March 2002 #12;Abstract The Optics and Fluid Dynamics Department performs basic and applied research within three scientific programmes: (1) laser systems and optical materials, (2) optical diagnostics

  8. Optics and Fluid Dynamics ^>*myft Annual Progress Report

    E-Print Network [OSTI]

    Optics and Fluid Dynamics ^>*myft Department Annual Progress Report 1 January - 31 December 1991;Abstract Research in the Optics and Fluid Dynamics Department covers quasi-elas.ic light scattering, optic association. A ? .mmary of activities in 1991 ii presented. Optical diagnostic methods based on quasi

  9. Ris-R-1453(EN) Optics and Fluid Dynamics

    E-Print Network [OSTI]

    Risř-R-1453(EN) Optics and Fluid Dynamics Department Annual Progress Report for 2003 Edited by H May 2004 #12;Abstract The Optics and Fluid Dynamics Department performs basic and applied research within three scientific programmes: (1) laser systems and optical materials, (2) optical diagnostics

  10. Ris-R-1399(EN) Optics and Fluid Dynamics

    E-Print Network [OSTI]

    Risř-R-1399(EN) Optics and Fluid Dynamics Department Annual Progress Report for 2002 Edited by H May 2003 #12;Abstract The Optics and Fluid Dynamics Department performs basic and applied research within three scientific programmes: (1) laser systems and optical materials, (2) optical diagnostics

  11. Optics and Fluid Dynamics Department Intellectual Capital Accounts 1998

    E-Print Network [OSTI]

    Optics and Fluid Dynamics Department Intellectual Capital Accounts 1998 Resources, production and results RISŘ-R-1108(EN) Risř National Laboratory Optics and Fluid Dynamics Department Building 128 P for optical information storage, · novel schemes for spatial cryptography, and · new models for surface

  12. Zliding: Fluid Zooming and Sliding for High Precision Parameter Manipulation

    E-Print Network [OSTI]

    Balakrishnan, Ravin

    propose and study a mechanism for use with pressure sensitive input devices, called Zoom SlidingZliding: Fluid Zooming and Sliding for High Precision Parameter Manipulation Gonzalo Ramos, Ravin to the parameter itself. This paper introduces the notion of Zoom Sliding, or Zliding, for fluid integrated

  13. William Benton and Jim Turner, Cabot Specialty Fluids

    E-Print Network [OSTI]

    Laughlin, Robert B.

    wells is to control well pressures while drilling or completing wells. Cesium formate is the heaviest of the monovalent alkali metal salts, all of which are very soluble in water and form high density fluids with a range of beneficial properties. This makes them ideally suited for use as drilling and completion fluids

  14. Approximate Dynamic Programming for Networks: Fluid Models and Constraint Reduction

    E-Print Network [OSTI]

    Veatch, Michael H.

    of approximating functions for the differential cost. The first contribution of this paper is identifying new or piece-wise quadratic. Fluid cost has been used to initialize the value iteration algorithm [5Approximate Dynamic Programming for Networks: Fluid Models and Constraint Reduction Michael H

  15. Development of an analytical model for organic-fluid fouling

    SciTech Connect (OSTI)

    Panchal, C.B.; Watkinson, A.P.

    1994-10-01T23:59:59.000Z

    The research goal of this project is to determine ways to effectively mitigate fouling in organic fluids: hydrocarbons and derived fluids. The fouling research focuses on the development of methodology for determining threshold conditions for fouling. Initially, fluid containing chemicals known to produce foulant is analyzed; subsequently, fouling of industrial fluids is investigated. The fouling model developed for determining the effects of physical parameters is the subject of this report. The fouling model is developed on the premise that the chemical reaction for generation of precursor can take place in the bulk fluid, in the thermal-boundary layer, or at the fluid/wall interface, depending upon the interactive effects of fluid dynamics, heat and mass transfer, and the controlling chemical reaction. In the analysis, the experimental data are examined for fouling deposition of polyperoxide produced by autoxidation of indene in kerosene. The effects of fluid and wall temperatures for two flow geometries are analyzed. The results show that the relative effects of physical parameters on the fouling rate differ for the three fouling mechanisms. Therefore, to apply the closed-flow-loop data to industrial conditions, the controlling mechanism must be identified.

  16. Fluid dynamic issues in continuous wave short wavelength chemical lasers

    SciTech Connect (OSTI)

    Mikatarian, R.R.; Jumper, E.J.; Woolhiser, C.

    1988-01-01T23:59:59.000Z

    This paper addresses fluid dynamic issues of concern in the design and development of Continuous Wave (CW) Short Wavelength Chemical Lasers (SWCLs). Short Wavelength Chemical Laser technology is in its research stage and SWCL concepts are in their evolving mode. Researchers are presently addressing candidate chemical systems and activation concepts. Since these lasers will be flowing systems, it is necessary to discuss both the probable fluid dynamics issues, because of the inherent complexities fluid dynamicist can support this activity. In addition to addressing the SWCL fluid dynamic issues, this paper will review past fluid dynamic activities in high energy lasers and discuss additional research still required. This paper will also address the various levels of fluid dynamic modeling and how these models can be applied in studying the fluid dynamics of Short Wavelength Chemical Lasers. Where it is felt that specific fluid methodologies are not available, but are required in order to conduct specific analyses, they will be defined. 34 refs., 6 figs., 1 tab.

  17. Fluid helium at conditions of giant planetary interiors Lars Stixrude*

    E-Print Network [OSTI]

    Stixrude, Lars

    Fluid helium at conditions of giant planetary interiors Lars Stixrude* and Raymond Jeanloz-abundant chemical element in the universe, helium makes up a large fraction of giant gaseous planets, includ- ing simulations, we find that fluid helium undergoes temperature-induced metallization at high pressures

  18. Power systems utilizing the heat of produced formation fluid

    DOE Patents [OSTI]

    Lambirth, Gene Richard (Houston, TX)

    2011-01-11T23:59:59.000Z

    Systems, methods, and heaters for treating a subsurface formation are described herein. At least one method includes treating a hydrocarbon containing formation. The method may include providing heat to the formation; producing heated fluid from the formation; and generating electricity from at least a portion of the heated fluid using a Kalina cycle.

  19. Reply to Engelder: Potential for fluid migration from the Marcellus

    E-Print Network [OSTI]

    Jackson, Robert B.

    LETTER Reply to Engelder: Potential for fluid migration from the Marcellus Formation remains) and brines by imbibition and capillary binding seals the Marcellus Formation and precludes the flow of fluids between the Marcellus Formation and shallow aquifers in northeastern Pennsylvania (2). First, considerable

  20. Shear-induced sedimentation in yield stress fluids Guillaume Ovarlez

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    if a given material will remain ho- mogeneous during a flow. Using MRI techniques, we study the time the local shear rate in the interstitial fluid. Keywords: Sedimentation; Yield stress fluid; Suspension; MRI some lift or dispersion forces to the particles. This principle is typically used in fluidization

  1. Fluid forces on two circular cylinders in crossflow

    SciTech Connect (OSTI)

    Jendrzejczyk, J.A.; Chen, S.S.

    1986-01-01T23:59:59.000Z

    Fluid excitation forces are measured in a water loop for two circular cylinders arranged in tandem and normal to flow. The Strouhal number and fluctuating drag and lift coefficients for both cylinders are presented for various spacings and incoming flow conditions. The results show the effects of Reynolds number, pitch ratio, and upstream turbulence on the fluid excitation forces.

  2. Enhancing Particle Methods for Fluid Simulation in Computer Graphics

    E-Print Network [OSTI]

    Bridson, Robert

    and spectral cascade of turbulent energy are captured, whereas they are left unresolved on a typical simulation the fluid and are assigned with extrapolated fluid quantities to reach correct boundary conditions. The Beta characteristics of the surface, the focus in Beta Mesh is producing a surface which varies smoothly in time

  3. Tailored Working Fluids for Enhanced Binary Geothermal Power Plants

    Broader source: Energy.gov [DOE]

    DOE Geothermal Program Peer Review 2010 - Presentation. Project Objective: To improve the utilization of available energy in geothermal resources and increase the energy conversion efficiency of systems employed by a) tailoring the subcritical and/or supercritical glide of enhanced working fluids to best match thermal resources, and b) identifying appropriate thermal system and component designs for the down-selected working fluids.

  4. Computational fluid dynamics modeling of coal gasification in a pressurized spout-fluid bed

    SciTech Connect (OSTI)

    Zhongyi Deng; Rui Xiao; Baosheng Jin; He Huang; Laihong Shen; Qilei Song; Qianjun Li [Southeast University, Nanjing (China). Key Laboratory of Clean Coal Power Generation and Combustion Technology of Ministry of Education

    2008-05-15T23:59:59.000Z

    Computational fluid dynamics (CFD) modeling, which has recently proven to be an effective means of analysis and optimization of energy-conversion processes, has been extended to coal gasification in this paper. A 3D mathematical model has been developed to simulate the coal gasification process in a pressurized spout-fluid bed. This CFD model is composed of gas-solid hydrodynamics, coal pyrolysis, char gasification, and gas phase reaction submodels. The rates of heterogeneous reactions are determined by combining Arrhenius rate and diffusion rate. The homogeneous reactions of gas phase can be treated as secondary reactions. A comparison of the calculated and experimental data shows that most gasification performance parameters can be predicted accurately. This good agreement indicates that CFD modeling can be used for complex fluidized beds coal gasification processes. 37 refs., 7 figs., 5 tabs.

  5. Microscale fluid transport using optically controlled marangoni effect

    DOE Patents [OSTI]

    Thundat, Thomas G (Knoxville, TN); Passian, Ali (Knoxville, TN); Farahi, Rubye H (Oak Ridge, TN)

    2011-05-10T23:59:59.000Z

    Low energy light illumination and either a doped semiconductor surface or a surface-plasmon supporting surface are used in combination for manipulating a fluid on the surface in the absence of any applied electric fields or flow channels. Precise control of fluid flow is achieved by applying focused or tightly collimated low energy light to the surface-fluid interface. In the first embodiment, with an appropriate dopant level in the semiconductor substrate, optically excited charge carriers are made to move to the surface when illuminated. In a second embodiment, with a thin-film noble metal surface on a dispersive substrate, optically excited surface plasmons are created for fluid manipulation. This electrode-less optical control of the Marangoni effect provides re-configurable manipulations of fluid flow, thereby paving the way for reprogrammable microfluidic devices.

  6. Computerized fluid movement mapping and 3-D visualization

    SciTech Connect (OSTI)

    Al-Awami, A.A.; Poore, J.W. [Saudi Aramco, Dhahran (Saudi Arabia); Sizer, J.P.

    1995-11-01T23:59:59.000Z

    Most of the fieldwide fluid movement monitoring techniques under utilize available computer resources. This paper discusses an approach reservoir management engineers use to monitor fluid movement in reservoirs with a multitude of wells. This approach allows the engineer to maintain up-to-date fluid movement studies and incorporate the latest information from data acquisition programs into the day to day decision-making process. The approach uses several in-house database applications and makes extensive use of commercially available software products to generate and visualize cross-sections, maps, and 3-d models. This paper reviews the computerized procedures to create cross-sections that display the current fluid contacts overlaying the lithology. It also reviews the mapping procedures nd presents examples of water encroachment maps by layer at specific time periods. 3-D geologic modeling software greatly enhances the visualization of the reservoir. This software can also be used to interpret and model fluid movement, given the appropriate engineering constraints.

  7. Flow networks: A characterization of geophysical fluid transport

    E-Print Network [OSTI]

    Enrico Ser-Giacomi; Vincent Rossi; Cristobal Lopez; Emilio Hernandez-Garcia

    2015-03-05T23:59:59.000Z

    We represent transport between different regions of a fluid domain by flow networks, constructed from the discrete representation of the Perron-Frobenius or transfer operator associated to the fluid advection dynamics. The procedure is useful to analyze fluid dynamics in geophysical contexts, as illustrated by the construction of a flow network associated to the surface circulation in the Mediterranean sea. We use network-theory tools to analyze the flow network and gain insights into transport processes. In particular we quantitatively relate dispersion and mixing characteristics, classically quantified by Lyapunov exponents, to the degree of the network nodes. A family of network entropies is defined from the network adjacency matrix, and related to the statistics of stretching in the fluid, in particular to the Lyapunov exponent field. Finally we use a network community detection algorithm, Infomap, to partition the Mediterranean network into coherent regions, i.e. areas internally well mixed, but with little fluid interchange between them.

  8. System and method measuring fluid flow in a conduit

    DOE Patents [OSTI]

    Ortiz, Marcos German (Idaho Falls, ID); Kidd, Terrel G. (Blackfoot, ID)

    1999-01-01T23:59:59.000Z

    A system for measuring fluid mass flow in a conduit in which there exists a pressure differential in the fluid between at least two spaced-apart locations in the conduit. The system includes a first pressure transducer disposed in the side of the conduit at a first location for measuring pressure of fluid at that location, a second or more pressure transducers disposed in the side of the conduit at a second location, for making multiple measurements of pressure of fluid in the conduit at that location, and a computer for computing the average pressure of the multiple measurements at the second location and for computing flow rate of fluid in the conduit from the pressure measurement by the first pressure transducer and from the average pressure calculation of the multiple measurements.

  9. Method And Apparatus For Atomizing Fluids With A Multi-Fluid Nozzle

    DOE Patents [OSTI]

    Novick, Vincent J. (Downers Grove, IL); Ahluwalia, Rajesh K. (Burr Ridge, IL)

    2004-12-07T23:59:59.000Z

    The invention relates to a method an apparatus for atomizing liquids. In particular, the present invention relates to a method and apparatus for atomizing heavy hydrocarbon fuels such as diesel, as part of a fuel reforming process. During normal operating conditions the fuel is atomized by a high pressure fluid. Under start-up conditions when only a low pressure gas is available the fuel films across part of the nozzle and is subsequently atomized by a radially directed low pressure dispersion gas.

  10. Scaling fluid content-pressure relations of different fluid systems in porous media

    SciTech Connect (OSTI)

    Lenhard, R.J.

    1994-04-01T23:59:59.000Z

    Two-fluid-phase relations among fluid saturations (S) and pressures (P) have historically been used to predict S-P relations for three-fluid-phase systems consisting of a gas, nonaqueous phase liquid (NAPL), and water, because measurements of three-phase S-P relations are complex. Two-phase S-P relations of air-NAPL systems are generally used to predict the behavior between total-liquid saturations of three-phase systems and air-NAPL capillary pressures. Two-phase S-P relations of NAPL-water systems are generally used to predict the behavior between water saturations of three-phase systems and NAPL-water capillary pressures. Because S-P measurements are very time-consuming, investigators have attempted to scale S-P relations so that fewer measurements would be required. A S-P scaling technique is discussed in this paper, and methods to predict the scaling factors are evaluated.

  11. Apparatus and method for selectively channeling a fluid

    DOE Patents [OSTI]

    Rightley, Michael Joseph (Albuquerque, NM)

    2008-01-01T23:59:59.000Z

    An apparatus for selectively channeling a high temperature fluid without chemically reacting with the fluid. The apparatus includes an inlet and a membrane positioned adjacent to the inlet, each composed of a chemically inert material. The membrane is formed by compressive preloading techniques. The apparatus further includes a seat disposed on the inlet adjacent to the membrane. The seat is composed of a heat resistant and chemically inert material. Operation of the apparatus requires that the temperature of the fluid remains below the chemical characteristic melting point of the seat. The apparatus further includes an actuator coupled to the membrane for rendering the membrane in an open and a closed position with respect to the seat. Specifically, the actuator supplies a load in the normal direction to the membrane to selectively engage the membrane in a plurality of predetermined configurations. Operatively, the apparatus receives the fluid at the inlet. The fluid is received at a high temperature and is directed from the inlet to the membrane. In the closed position, the actuator engages the membrane to prevent the fluid from flowing from the inlet between the membrane and the seat. Alternatively, in the open position, the actuator engages the membrane to permit fluid flow from the inlet between the membrane and the seat to at least one outlet provided by the apparatus. In one exemplary embodiment, the fluid may be discharged from the at least one outlet to a sensor in fluid communication with the at least one outlet. Accordingly, the sensor may measure the fluid channeled through the heat resistant and chemically inert environment provided by the apparatus.

  12. Geophysical Fluid Dynamics Laboratory general circulation model investigation of the indirect radiative effects

    E-Print Network [OSTI]

    Russell, Lynn

    Geophysical Fluid Dynamics Laboratory general circulation model investigation of the indirect Corporation for Atmospheric Research, Geophysical Fluid Dynamics Laboratory, Princeton, New Jersey, USA V. Ramaswamy, Paul A. Ginoux, and Larry W. Horowitz Geophysical Fluid Dynamics Laboratory, Princeton, New

  13. Slow wave in fluid-filled Fractures: What is missing in Biot's theory?

    E-Print Network [OSTI]

    Valeri Korneev, Lawrence Berkeley Nat'l Lab, Berkeley

    2007-08-03T23:59:59.000Z

    role of fractures in fluid-flow processes at field scales, and ... fluid-filled fractures and an elastic, embedding matrix does not have the .... Non-viscous fluid h.

  14. Fluid Simulation as a Tool for Painterly Rendering Sven C. Olsen

    E-Print Network [OSTI]

    Maxwell, Bruce

    frames. When creating videos from still images, we move non-fluid controlled strokes us- ing the thin with ways in which the fluid fields can be informed by properties of the image. We usually consider non-fluid

  15. PREDICTION OF CUTTINGS BED HEIGHT WITH COMPUTATIONAL FLUID DYNAMICS IN DRILLING HORIZONTAL AND HIGHLY DEVIATED WELLS

    E-Print Network [OSTI]

    Ullmer, Brygg

    PREDICTION OF CUTTINGS BED HEIGHT WITH COMPUTATIONAL FLUID DYNAMICS IN DRILLING HORIZONTAL parameters such as wellbore geometry, pump rate, drilling fluid rheology and density, and maximum drilling Computational Fluid Dynamics methods. Movement, concentration and accumulation of drilled cuttings in non

  16. Development and testing of a standard procedure for determining the viscous properties of crosslinked fracture fluids

    E-Print Network [OSTI]

    Worlow, David Wayne

    1987-01-01T23:59:59.000Z

    , be compatible with reser voir fluids, and easily produced from the for mation. The fluid system 1 should also have adequate proppant transport capability, low fluid loss, and low pumping friction loss. The viscosity of the fluid system controls the fracture... width, fluid loss, friction pr essure, and proppant transport. Ideally, the fluid system would exhibit low viscosity when pumped down the wellbor e, and high viscosity in the fracture. Low viscosity in the tubular goods would minimize friction...

  17. Using Solid Particles as Heat Transfer Fluid for use in Concentrating...

    Broader source: Energy.gov (indexed) [DOE]

    Using Solid Particles as Heat Transfer Fluid for use in Concentrating Solar Power (CSP) Plants Using Solid Particles as Heat Transfer Fluid for use in Concentrating Solar Power...

  18. Journal of Non-Newtonian Fluid Mechanics An adaptive mixed least ...

    E-Print Network [OSTI]

    2009-04-15T23:59:59.000Z

    J. Non-Newtonian Fluid Mech. 159 (2009) 72–80. Contents lists available at ScienceDirect. Journal of Non-Newtonian Fluid Mechanics journal homepage: ...

  19. Encapsulated Nanoparticle Synthesis and Characterization for Improved Storage Fluids: Preprint

    SciTech Connect (OSTI)

    Glatzmaier, G. C.; Pradhan, S.; Kang, J.; Curtis, C.; Blake, D.

    2010-10-01T23:59:59.000Z

    Nanoparticles are typically composed of 50--500 atoms and exhibit properties that are significantly different from the properties of larger, macroscale particles that have the same composition. The addition of these particles to traditional fluids may improve the fluids' thermophysical properties. As an example, the addition of a nanoparticle or set of nanoparticles to a storage fluid may double its heat capacity. This increase in heat capacity would allow a sensible thermal energy storage system to store the same amount of thermal energy in half the amount of storage fluid. The benefit is lower costs for the storage fluid and the storage tanks, resulting in lower-cost electricity. The goal of this long-term research is to create a new class of fluids that enable concentrating solar power plants to operate with greater efficiency and lower electricity costs. Initial research on this topic developed molecular dynamic models that predicted the energy states and transition temperatures for these particles. Recent research has extended the modeling work, along with initiating the synthesis and characterization of bare metal nanoparticles and metal nanoparticles that are encapsulated with inert silica coatings. These particles possess properties that make them excellent candidates for enhancing the heat capacity of storage fluids.

  20. Method and apparatus for determining fluid mass flowrates

    DOE Patents [OSTI]

    Hamel, W.R.

    1982-10-07T23:59:59.000Z

    This invention relates to a new method and new apparatus for determining fluid mass flowrate and density. In one aspect of the invention, the fluid is passed through a straight cantilevered tube in which transient oscillation has been induced, thus generating Coriolis damping forces on the tube. The decay rate and frequency of the resulting damped oscillation are measured, and the fluid mass flowrate and density are determined therefrom. In another aspect of the invention, the fluid is passed through the cantilevered tube while an electrically powered device imparts steady-state harmonic excitation to the tube. This generates Coriolis tube-damping forces which are dependent on the mass flowrate of the fluid. Means are provided to respond to incipient flow-induced changes in the amplitude of vibration by changing the power input to the excitation device as required to sustain the original amplitude of vibration. The fluid mass flowrate and density are determined from the required bending of the fluid flow.

  1. A new and effective method for thermostatting confined fluids

    SciTech Connect (OSTI)

    De Luca, Sergio; Todd, B. D., E-mail: btodd@swin.edu.au [Department of Mathematics, Faculty of Science, Engineering and Technology, and Centre for Molecular Simulation, Swinburne University of Technology, Melbourne, Victoria 3122 (Australia); Hansen, J. S. [DNRF Center “Glass and Time,” IMFUFA, Department of Science, Systems and Models, Roskilde University, DK-4000 Roskilde (Denmark)] [DNRF Center “Glass and Time,” IMFUFA, Department of Science, Systems and Models, Roskilde University, DK-4000 Roskilde (Denmark); Daivis, Peter J. [School of Applied Sciences, RMIT University, Melbourne, Victoria 3001 (Australia)] [School of Applied Sciences, RMIT University, Melbourne, Victoria 3001 (Australia)

    2014-02-07T23:59:59.000Z

    We present a simple thermostatting method suitable for nanoconfined fluid systems. Two conventional strategies involve thermostatting the fluid directly or employing a thermal wall that couples only the wall atoms with the thermostat. When only a thermal wall is implemented, the temperature control of the fluid is true to the actual experiment and the heat is transferred from the fluid to the walls. However, for large or complex systems it can often be computationally prohibitive to employ thermal walls. To overcome this limitation many researchers choose to freeze wall atoms and instead apply a synthetic thermostat to the fluid directly through the equations of motion. This, however, can have serious consequences for the mechanical, thermodynamic, and dynamical properties of the fluid by introducing unphysical behaviour into the system [Bernardi et al., J. Chem. Phys. 132, 244706 (2010)]. In this paper, we propose a simple scheme which enables working with both frozen walls and naturally thermostatted liquids. This is done by superimposing the walls with oscillating particles, which vibrate on the edge of the fluid control volume. These particles exchange energy with the fluid molecules, but do not interact with wall atoms or each other, thus behaving as virtual particles. Their displacements violate the Lindemann criterion for melting, in such a way that the net effect would not amount to an additional confining surface. One advantage over standard techniques is the reduced computational cost, particularly for large walls, since they can be kept rigid. Another advantage over accepted strategies is the opportunity to freeze complex charged walls such as ?-cristobalite. The method furthermore overcomes the problem with polar fluids such as water, as thermalized charged surfaces require higher spring constants to preserve structural stability, due to the effects of strong Coulomb interactions, thus inevitably degrading the thermostatting efficiency.

  2. Notes 06. Liquid cavitation in fluid film bearings

    E-Print Network [OSTI]

    San Andres, Luis

    2009-01-01T23:59:59.000Z

    NOTES 6. CAVITATION IN LIQUID FILM BEARINGS. Dr. Luis San Andr?s ? 2009 1 NOTES 6. LIQUID CAVITATION IN FLUID FILM BEARINGS Lecture 6 describes the phenomenon of liquid cavitation in steadily loaded fluid film bearings and notes the most... ? Density at Pcav [kg/m 3 ] ? Fluid absolute viscosity [N.s/m 2 ] ? Journal angular speed (rad/s) Subscripts * Inception of the cavitation zone a Ambient value cav Cavitation NOTES 6. CAVITATION IN LIQUID FILM BEARINGS. Dr. Luis San Andr?s ? 2009...

  3. Fully Coupled Well Models for Fluid Injection and Production

    SciTech Connect (OSTI)

    White, Mark D.; Bacon, Diana H.; White, Signe K.; Zhang, Z. F.

    2013-08-05T23:59:59.000Z

    Wells are the primary engineered component of geologic sequestration systems with deep subsurface reservoirs. Wells provide a conduit for injecting greenhouse gases and producing reservoirs fluids, such as brines, natural gas, and crude oil, depending on the target reservoir. Well trajectories, well pressures, and fluid flow rates are parameters over which well engineers and operators have control during the geologic sequestration process. Current drilling practices provided well engineers flexibility in designing well trajectories and controlling screened intervals. Injection pressures and fluids can be used to purposely fracture the reservoir formation or to purposely prevent fracturing. Numerical simulation of geologic sequestration processes involves the solution of multifluid transport equations within heterogeneous geologic media. These equations that mathematically describe the flow of fluid through the reservoir formation are nonlinear in form, requiring linearization techniques to resolve. In actual geologic settings fluid exchange between a well and reservoir is a function of local pressure gradients, fluid saturations, and formation characteristics. In numerical simulators fluid exchange between a well and reservoir can be specified using a spectrum of approaches that vary from totally ignoring the reservoir conditions to fully considering reservoir conditions and well processes. Well models are a numerical simulation approach that account for local conditions and gradients in the exchange of fluids between the well and reservoir. As with the mathematical equations that describe fluid flow in the reservoir, variation in fluid properties with temperature and pressure yield nonlinearities in the mathematical equations that describe fluid flow within the well. To numerically simulate the fluid exchange between a well and reservoir the two systems of nonlinear multifluid flow equations must be resolved. The spectrum of numerical approaches for resolving these equations varies from zero coupling to full coupling. In this paper we describe a fully coupled solution approach for well model that allows for a flexible well trajectory and screened interval within a structured hexahedral computational grid. In this scheme the nonlinear well equations have been fully integrated into the Jacobian matrix for the reservoir conservation equations, minimizing the matrix bandwidth.

  4. Viscous quark-gluon plasma model through fluid QCD approach

    SciTech Connect (OSTI)

    Djun, T. P., E-mail: tpdjun@teori.fisika.lipi.go.id [Graduate Study in Material Science, University of Indonesia, Kampus UI Salemba, Jakarta 10430, Indonesia and Group for Theoretical and Computational Physics, Research Center for Physics, Indonesian Institute of Sciences, Kompleks Puspiptek Serpong, T (Indonesia); Soegijono, B.; Mart, T. [Graduate Study in Material Science, University of Indonesia, Kampus UI Salemba, Jakarta 10430, Indonesia and Department of Physics, University of Indonesia, Kampus UI Depok, Depok 16424 (Indonesia); Handoko, L. T., E-mail: Handoko@teorifisika.lipi.go.id, E-mail: Laksana.tri.handoko@lipi.go.id [Group for Theoretical and Computational Physics, Research Center for Physics, Indonesian Institute of Sciences, Kompleks Puspiptek Serpong, Tangerang 15310, Indonesia and Research Center for Informatics, Indonesia Institute of Sciences, Kompleks LIPI (Indonesia)

    2014-09-25T23:59:59.000Z

    A Lagrangian density for viscous quark-gluon plasma has been constructed within the fluid-like QCD framework. Gauge symmetry is preserved for all terms inside the Lagrangian, except for the viscous term. The transition mechanism from point particle field to fluid field, and vice versa, are discussed. The energy momentum tensor that is relevant to the gluonic plasma having the nature of fluid bulk of gluon sea is derived within the model. By imposing conservation law in the energy momentum tensor, shear viscosity appears as extractable from the equation.

  5. Classical analogous of quantum cosmological perfect fluid models

    E-Print Network [OSTI]

    Batista, A B; Gonçalves, S V B; Tossa, J

    2001-01-01T23:59:59.000Z

    Quantization in the mini-superspace of a gravity system coupled to a perfect fluid, leads to a solvable model which implies singularity free solutions through the construction of a superposition of the wavefunctions. We show that such models are equivalent to a classical system where, besides the perfect fluid, a repulsive fluid with an equation of state $p_Q = \\rho_Q$ is present. This leads to speculate on the true nature of this quantization procedure. A perturbative analysis of the classical system reveals the condition for the stability of the classical system in terms of the existence of an anti-gravity phase.

  6. Collapsing Inhomogeneous Dust Fluid in the Background of Dark Energy

    E-Print Network [OSTI]

    Tanwi Bandyopadhyay; Subenoy Chakraborty

    2006-05-11T23:59:59.000Z

    In the present work, gravitational collapse of an inhomogeneous spherical star model, consisting of inhomogeneous dust fluid (dark matter) in the background of dark energy is considered. The collapsing process is examined first separately for both dark matter and dark energy and then under the combined effect of dark matter and dark energy with or without interaction. The dark energy is considered in the form of perfect fluid and both marginally and non-marginally bound cases are considered for the collapsing model. Finally dark energy in the form of anisotropic fluid is investigated and it is found to be similar to ref. [12

  7. Method for controlling clathrate hydrates in fluid systems

    DOE Patents [OSTI]

    Sloan, Jr., Earle D. (Golden, CO)

    1995-01-01T23:59:59.000Z

    Discussed is a process for preventing clathrate hydrate masses from impeding the flow of fluid in a fluid system. An additive is contacted with clathrate hydrate masses in the system to prevent those clathrate hydrate masses from impeding fluid flow. The process is particularly useful in the natural gas and petroleum production, transportation and processing industry where gas hydrate formation can cause serious problems. Additives preferably contain one or more five member and/or six member cyclic chemical groupings. Additives include poly(N-vinyl-2-pyrrolidone) and hydroxyethylcellulose, either in combination or alone.

  8. -Oak Ridge National l. oy [EFECT%W flHSUia-9PI gi)N~PCOEjJIR!.,o tS N9IN FN_RWiD)LCTH pgR^ s -

    E-Print Network [OSTI]

    Oak Ridge National Laboratory

    , and cooler) of a I maximum velocity of fluid based on cross- Stirling engine properly. Two major design goals occurring in a real Stirling engine. Irmiance of the GPU-3 and 41.3 enginoe is dii- The effects of pressure 7 ABSItA(I' For ;:Ipo flow Pressure-drop correltl ons for Stirling-en-- I nondimensional variable

  9. 2005 Pearson Education South Asia Pte Ltd Applied Fluid Mechanics

    E-Print Network [OSTI]

    Leu, Tzong-Shyng "Jeremy"

    Education South Asia Pte Ltd Applied Fluid Mechanics 17.Drag and Lift 18.Fans, Blowers, Compressors the relationships between specific weight, specific gravity, and density, and solve problems using

  10. 2005 Pearson Education South Asia Pte Ltd Applied Fluid Mechanics

    E-Print Network [OSTI]

    Leu, Tzong-Shyng "Jeremy"

    Education South Asia Pte Ltd Applied Fluid Mechanics 17.Drag and Lift 18.Fans, Blowers, Compressors Pearson Education South Asia Pte Ltd Example 9.1 In Example Problem 8.1 we found that the Reynolds number

  11. 2.25 Advanced Fluid Mechanics, Fall 2002

    E-Print Network [OSTI]

    Sonin, A. A.

    Survey of principal concepts and methods of fluid dynamics. Mass conservation, momentum, and energy equations for continua. Navier-Stokes equation for viscous flows. Similarity and dimensional analysis. Lubrication theory. ...

  12. The linear and nonlinear rheology of multiscale complex fluids

    E-Print Network [OSTI]

    Jaishankar, Aditya

    2014-01-01T23:59:59.000Z

    The microstructures of many complex fluids are typically characterized by a broad distribution of internal length scales. Examples of such multiscale materials include physically and chemically cross-linked gels, emulsions, ...

  13. MODELING COUPLED FLUID FLOW AND GEOMECHANICAL AND GEOPHYSICAL PHENOMENA WITHIN

    E-Print Network [OSTI]

    MODELING COUPLED FLUID FLOW AND GEOMECHANICAL AND GEOPHYSICAL PHENOMENA WITHIN A FINITE ELEMENT for the modeling of geomechanical effects induced by reservoir production/injection and the cyclic dependence

  14. Nanoscale Pore Network and Pore Fluid Characterization from Neutron...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nanoscale Pore Network and Pore Fluid Characterization from Neutron Scattering and Modeling Techniques Jul 22 2015 10:00 AM - 11:00 AM Gernot Rother, Chemical Sciences Division...

  15. Geothermal fracture stimulation technology. Volume III. Geothermal fracture fluids

    SciTech Connect (OSTI)

    Not Available

    1981-01-01T23:59:59.000Z

    A detailed study of all available and experimental frac fluid systems is presented. They have been examined and tested for physical properties that are important in the stimulation of hot water geothermal wells. These fluids consist of water-based systems containing high molecular weight polymers in the uncrosslinked and crosslinked state. The results of fluid testing for many systems are summarized specifically at geothermal conditions or until breakdown occurs. Some of the standard tests are ambient viscosity, static aging, high temperature viscosity, fluid-loss testing, and falling ball viscosity at elevated temperatures and pressures. Results of these tests show that unalterable breakdown of the polymer solutions begins above 300/sup 0/F. This continues at higher temperatures with time even if stabilizers or other high temperature additives are included.

  16. Coalescence of bubbles and drops in an outer fluid

    E-Print Network [OSTI]

    Joseph D. Paulsen; Rémi Carmigniani; Anerudh Kannan; Justin C. Burton; Sidney R. Nagel

    2014-07-24T23:59:59.000Z

    When two liquid drops touch, a microscopic connecting liquid bridge forms and rapidly grows as the two drops merge into one. Whereas coalescence has been thoroughly studied when drops coalesce in vacuum or air, many important situations involve coalescence in a dense surrounding fluid, such as oil coalescence in brine. Here we study the merging of gas bubbles and liquid drops in an external fluid. Our data indicate that the flows occur over much larger length scales in the outer fluid than inside the drops themselves. Thus we find that the asymptotic early regime is always dominated by the viscosity of the drops, independent of the external fluid. A phase diagram showing the crossovers into the different possible late-time dynamics identifies a dimensionless number that signifies when the external viscosity can be important.

  17. North America Drilling Fluids Market Segment Forecasts up to...

    Open Energy Info (EERE)

    America and Asia Pacific is steering the market for drilling fluids. Half of the world's oil and gas reserves are present in the U.S. hence North America is entitled as the...

  18. High speed imaging of transient non-Newtonian fluid phenomena

    E-Print Network [OSTI]

    Gallup, Benjamin H. (Benjamin Hodsdon), 1982-

    2004-01-01T23:59:59.000Z

    In this thesis, I investigate the utility of high speed imaging for gaining scientific insight into the nature of short-duration transient fluid phenomena, specifically applied to the Kaye effect. The Kaye effect, noted ...

  19. Microthermometry of Fluid Inclusions from the VC-1 Core Hole...

    Open Energy Info (EERE)

    Some of these inclusions show extraordinary low temperatures of final melting point of ice (about -40C), suggesting that a CaCl2 component is present. CO2 contents in fluid...

  20. Selection of Working Fluids for the Organic Rankine Cycle

    E-Print Network [OSTI]

    West, H. H.; Patton, J. M.; Starling, K. E.

    1979-01-01T23:59:59.000Z

    The subject of selecting working fluid and process operating conditions for the waste heat binary power cycle is addressed herein. The waste heat temperature range from 300 F to 500 F was considered the economic resource range. The available...

  1. Computational Fluid Dynamics Study of Aerosol Transport and Deposition Mechanisms

    E-Print Network [OSTI]

    Tang, Yingjie

    2012-07-16T23:59:59.000Z

    In this work, various aerosol particle transport and deposition mechanisms were studied through the computational fluid dynamics (CFD) modeling, including inertial impaction, gravitational effect, lift force, interception, and turbophoresis, within...

  2. Modeling of fluids and waves with analytics and numerics

    E-Print Network [OSTI]

    Liang, Xiangdong, Ph. D. Massachusetts Institute of Technology

    2013-01-01T23:59:59.000Z

    Capillary instability (Plateau-Rayleigh instability) has been playing an important role in experimental work such as multimaterial fiber drawing and multilayer particle fabrication. Motivated by complex multi-fluid geometries ...

  3. Diffusion driven object propulsion in density stratified fluids

    E-Print Network [OSTI]

    Lenahan, Conor (Conor P.)

    2009-01-01T23:59:59.000Z

    An experimental study was conducted in order to verify the appropriateness of a two dimensional model of the flow creating diffusion driven object propulsion in density stratified fluids. Initial flow field experiments ...

  4. To appear in INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS

    E-Print Network [OSTI]

    Hartmann, Ralf

    and sharp gradients. This stabilization introduces artificial viscosity at places of large local residuals.g. the drag and lift coe#cients of an airfoil immersed in a viscous or inviscid fluid. The performance

  5. Design, measurement, and analysis of oxygenated fluid pump system

    E-Print Network [OSTI]

    Mason, Alexander M., IV (Alexander Martin)

    2012-01-01T23:59:59.000Z

    The author sought out the opportunity to design and implement a system for pumping oxygenated fluid and mixing it with saline, for the purpose of providing sufficient levels of oxygen for patients undergoing forms of ...

  6. Sources Of Chloride In Hydrothermal Fluids From The Valles Caldera...

    Open Energy Info (EERE)

    Mexico hosts a high-temperature geothermal system, which is manifested in a number of hot springs discharging in and around the caldera. In order to determine the fluid pathways...

  7. Application of computational fluid dynamics to aerosol sampling and concentration

    E-Print Network [OSTI]

    Hu, Shishan

    2009-05-15T23:59:59.000Z

    An understanding of gas-liquid two-phase interactions, aerosol particle deposition, and heat transfer is needed. Computational Fluid Dynamics (CFD) is becoming a powerful tool to predict aerosol behavior for related design work. In this study...

  8. Wavelet methods For the numerical simulation of incompressible fluids

    E-Print Network [OSTI]

    Starck, Jean-Luc

    Wavelet methods For the numerical simulation of incompressible fluids Erwan Deriaz Erwan Numerik, Seminar February 16th 2006 0-0 #12; Wavelets for the Navier-Stokes equations homogeneous or non homogeneous) With a wavelet discretization: Ł ¦ ¨ 2 ©$# Ł % ¦ ¨ 2 © & '' ( 1

  9. Multiphase flow and control of fluid path in microsystems

    E-Print Network [OSTI]

    Jhunjhunwala, Manish

    2005-01-01T23:59:59.000Z

    Miniaturized chemical-systems are expected to have advantages of handling, portability, cost, speed, reproducibility and safety. Control of fluid path in small channels between processes in a chemical/biological network ...

  10. Neutral perfect fluids of Majumdar-type in general relativity

    E-Print Network [OSTI]

    V. Varela

    2005-01-31T23:59:59.000Z

    We consider the extension of the Majumdar-type class of static solutions for the Einstein-Maxwell equations, proposed by Ida to include charged perfect fluid sources. We impose the equation of state $\\rho+3p=0$ and discuss spherically symmetric solutions for the linear potential equation satisfied by the metric. In this particular case the fluid charge density vanishes and we locate the arising neutral perfect fluid in the intermediate region defined by two thin shells with respective charges $Q$ and $-Q$. With its innermost flat and external (Schwarzschild) asymptotically flat spacetime regions, the resultant condenser-like geometries resemble solutions discussed by Cohen and Cohen in a different context. We explore this relationship and point out an exotic gravitational property of our neutral perfect fluid. We mention possible continuations of this study to embrace non-spherically symmetric situations and higher dimensional spacetimes.

  11. V European Conference on Computational Fluid Dynamics ECCOMAS CFD 2010

    E-Print Network [OSTI]

    Berning, Torsten

    V European Conference on Computational Fluid Dynamics ECCOMAS CFD 2010 J. C. F. Pereira and A, increase the mixing of fuel and oxidant, control formation of harmful emissions, and increase the life

  12. Fluid-inclusion evidence for past temperature fluctuations in...

    Open Energy Info (EERE)

    of nearby dikes and their subsequent cooling. The fluid-inclusion data indicate that past temperatures in SOH-4 well were as much as 64C hotter than present temperatures...

  13. System for concentrating and analyzing particles suspended in a fluid

    DOE Patents [OSTI]

    Fiechtner, Gregory J. (Bethesda, MD); Cummings, Eric B. (Livermore, CA); Singh, Anup K. (Danville, CA)

    2011-04-26T23:59:59.000Z

    Disclosed is a device for separating and concentrating particles suspended in a fluid stream by using dielectrophoresis (DEP) to trap and/or deflect those particles as they migrate through a fluid channel. The method uses fluid channels designed to constrain a liquid flowing through it to uniform electrokinetic flow velocities. This behavior is achieved by connecting deep and shallow sections of channels, with the channel depth varying abruptly along an interface. By careful design of abrupt changes in specific permeability at the interface, an abrupt and spatially uniform change in electrokinetic force can be selected. Because these abrupt interfaces also cause a sharp gradient in applied electric fields, a DEP force also can be established along the interface. Depending on the complex conductivity of the suspended particles and the immersion liquid, the DEP force can controllably complement or oppose the local electrokinetic force transporting the fluid through the channel allowing for manipulation of particles suspended in the transporting liquid.

  14. High Operating Temperature Liquid Metal Heat Transfer Fluids...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to demonstrate that the metal alloys identified can meet all the needs of a concentrating solar power plant. A successful candidate fluid would allow for the reduction of the...

  15. Cryptic Faulting and Multi-Scale Geothermal Fluid Connections...

    Open Energy Info (EERE)

    from Mt Resistivity Surveying Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: Cryptic Faulting and Multi-Scale Geothermal Fluid Connections in...

  16. Intersecting Fault Trends and Crustal-Scale Fluid Pathways Below...

    Open Energy Info (EERE)

    3d Magnetotelluric Surveying Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: Intersecting Fault Trends and Crustal-Scale Fluid Pathways Below...

  17. Monitoring and Modeling Fluid Flow in a Developing EGS Reservoir

    Broader source: Energy.gov [DOE]

    Project objectives: Better understand and model fluid injection into a tight reservoir on the edges of a hydrothermal field. Use seismic data to constrain geomechanical/hydrologic/thermal model of reservoir.

  18. Hard Sphere Dynamics for Normal and Granular Fluids

    E-Print Network [OSTI]

    James W. Dufty; Aparna Baskaran

    2005-03-08T23:59:59.000Z

    A fluid of N smooth, hard spheres is considered as a model for normal (elastic collisions) and granular (inelastic collisions) fluids. The potential energy is discontinuous for hard spheres so the pairwise forces are singular and the usual forms of Newtonian and Hamiltonian mechanics do not apply. Nevertheless, particle trajectories in the N particle phase space are well defined and the generators for these trajectories can be identified. The first part of this presentation is a review of the generators for the dynamics of observables and probability densities. The new results presented in the second part refer to applications of these generators to the Liouville dynamics for granular fluids. A set of eigenvalues and eigenfunctions of the generator for this Liouville dynamics is identified in a special "stationary representation". This provides a class of exact solutions to the Liouville equation that are closely related to hydrodynamics for granular fluids.

  19. Model for Fracturing Fluid Flowback and Characterization of Flowback Mechanisms

    E-Print Network [OSTI]

    Song, Bo

    2014-08-28T23:59:59.000Z

    A large volume of fracturing fluid that may include slick water and various sorts of additives is injected into shale formations along with proppant to create hydraulic fractures which define a stimulated shale volume a shale gas well will actually...

  20. Controls on Fault-Hosted Fluid Flow: Preliminary Results from...

    Open Energy Info (EERE)

    Geothermal Field, CA Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Proceedings: Controls on Fault-Hosted Fluid Flow: Preliminary Results from the...