Powered by Deep Web Technologies
Note: This page contains sample records for the topic "flow improvements purchasing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

ENVIRONMENTAL PURCHASING POLICY  

E-Print Network [OSTI]

ENVIRONMENTAL PURCHASING POLICY The University of Leeds Environmental Policy includes the following the environmental policy and, in turn, that all suppliers and contractors progressively improve their own environmental performance". In line with this the University's Environmental Purchasing Policy requires

Haase, Markus

2

Green Purchasing  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Green Purchasing Green Purchasing LANL is committed to purchasing and using environmentally preferable products. Contact Environmental Communication & Public Involvement P.O. Box...

3

Rinse trough with improved flow  

DOE Patents [OSTI]

Novel rinse troughs accomplish thorough uniform rinsing. The troughs are suitable for one or more essentially planar objects having substantially the same shape. The troughs ensure that each surface is rinsed uniformly. The new troughs provide uniform rinse fluid flow over the objects` surfaces to accomplish a more thorough rinse than prior art troughs. 5 figs.

O`Hern, T.J.; Grasser, T.W.

1998-08-11T23:59:59.000Z

4

Flow injection analysis of phenolic compounds with carbon paste electrodes modified with tyrosinase purchased from different companies  

SciTech Connect (OSTI)

Tyrosinase-modified carbon paste electrodes were prepared using lyophilised powder of the enzyme purchased from different companies. The selectivity of these electrodes for nine phenolic compounds, including six substituted catechols, has been studied. The signals obtained for catechol were always higher than those found for other phenolic compounds. Cyclic voltammetry and flow injection measurements indicated that the response of the tyrosinase-modified carbon paste electrodes was limited by the rate of the enzymatic oxidation of catechols. Different approaches of past electrode preparation have been studied and compared. Direct mixing of enzyme into the graphite powder doped with the osmium based mediator, resulted in the highest sensitivity for the studied substrates. However, substrate selectivity was found to be dependent on the source of enzyme used for electrode preparation.

Lindgren, A.; Emneus, J.; Csoeregi, E.; Gorton, L.; Marko-Varga, G. [Univ. of Lund (Sweden); Ruzgas, T. [Inst. of Biochemistry, Vilnius (Lithuania)

1996-05-01T23:59:59.000Z

5

Improving Work Flow Reliability Proceedings IGLC-7 275  

E-Print Network [OSTI]

Ballard1 ABSTRACT Improving work flow reliability is important for the productivity of linked productionImproving Work Flow Reliability Proceedings IGLC-7 275 IMPROVING WORK FLOW RELIABILITY Glenn units, and consequently for project cost and duration. One measure of work flow reliability is PPC

Tommelein, Iris D.

6

Green Purchasing & Green Technology  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Purchasing & Technology Goals 6 & 7: Green Purchasing & Green Technology Our goal is to purchase and use environmentally sustainable products whenever possible and to implement...

7

Improving Web Site Security with Data Flow Alexander Siumann Yip  

E-Print Network [OSTI]

Improving Web Site Security with Data Flow Management by Alexander Siumann Yip S.B., Computer by . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Terry P. Orlando Chair, Department Committee on Graduate Students #12;2 #12;Improving Web Site Security

Gummadi, Ramakrishna

8

Improving application security with data flow assertions  

E-Print Network [OSTI]

Resin is a new language runtime that helps prevent security vulnerabilities, by allowing programmers to specify application-level data flow assertions. Resin provides policy objects, which programmers use to specify assertion ...

Yip, Alexander

9

Radiant energy receiver having improved coolant flow control means  

DOE Patents [OSTI]

An improved coolant flow control for use in radiant energy receivers of the type having parallel flow paths is disclosed. A coolant performs as a temperature dependent valve means, increasing flow in the warmer flow paths of the receiver, and impeding flow in the cooler paths of the receiver. The coolant has a negative temperature coefficient of viscosity which is high enough such that only an insignificant flow through the receiver is experienced at the minimum operating temperature of the receiver, and such that a maximum flow is experienced at the maximum operating temperature of the receiver. The valving is accomplished by changes in viscosity of the coolant in response to the coolant being heated and cooled. No remotely operated valves, comparators or the like are needed.

Hinterberger, H.

1980-10-29T23:59:59.000Z

10

Purchase Requisition & Purchase Order Approval Process Office of Research Administration  

E-Print Network [OSTI]

Purchase Requisition & Purchase Order Approval Process Office of Research Administration Purchase are sent to the Office of Research Administration as part of the approval for setting up a Purchase Order Requisition & Purchase Order Approval Process 1. Overview Purchase Requisitions and Field Purchase orders

11

IMPROVED BIOMASS UTILIZATION THROUGH REMOTE FLOW SENSING  

SciTech Connect (OSTI)

The growth of the livestock industry provides a valuable source of affordable, sustainable, and renewable bioenergy, while also requiring the safe disposal of the large quantities of animal wastes (manure) generated at dairy, swine, and poultry farms. If these biomass resources are mishandled and underutilized, major environmental problems will be created, such as surface and ground water contamination, odors, dust, ammonia leaching, and methane emission. Anaerobic digestion of animal wastes, in which microorganisms break down organic materials in the absence of oxygen, is one of the most promising waste treatment technologies. This process produces biogas typically containing {approx}65% methane and {approx}35% carbon dioxide. The production of biogas through anaerobic digestion from animal wastes, landfills, and municipal waste water treatment plants represents a large source of renewable and sustainable bio-fuel. Such bio-fuel can be combusted directly, used in internal combustion engines, converted into methanol, or partially oxidized to produce synthesis gas (a mixture of hydrogen and carbon monoxide) that can be converted to clean liquid fuels and chemicals via Fischer-Tropsch synthesis. Different design and mixing configurations of anaerobic digesters for treating cow manure have been utilized commercially and/or tested on a laboratory scale. These digesters include mechanically mixed, gas recirculation mixed, and slurry recirculation mixed designs, as well as covered lagoon digesters. Mixing is an important parameter for successful performance of anaerobic digesters. It enhances substrate contact with the microbial community; improves pH, temperature and substrate/microorganism uniformity; prevents stratification and scum accumulation; facilitates the removal of biogas from the digester; reduces or eliminates the formation of inactive zones (dead zones); prevents settling of biomass and inert solids; and aids in particle size reduction. Unfortunately, information and findings in the literature on the effect of mixing on anaerobic digestion are contradictory. One reason is the lack of measurement techniques for opaque systems such as digesters. Better understanding of the mixing and hydrodynamics of digesters will result in appropriate design, configuration selection, scale-up, and performance, which will ultimately enable avoiding digester failures. Accordingly, this project sought to advance the fundamental knowledge and understanding of the design, scale up, operation, and performance of cow manure anaerobic digesters with high solids loading. The project systematically studied parameters affecting cow manure anaerobic digestion performance, in different configurations and sizes by implementing computer automated radioactive particle tracking (CARPT), computed tomography (CT), and computational fluid dynamics (CFD), and by developing novel multiple-particle CARPT (MP-CARPT) and dual source CT (DSCT) techniques. The accomplishments of the project were achieved in a collaborative effort among Washington University, the Oak Ridge National Laboratory, and the Iowa Energy Center teams. The following investigations and achievements were accomplished: Systematic studies of anaerobic digesters performance and kinetics using various configurations, modes of mixing, and scales (laboratory, pilot plant, and commercial sizes) were conducted and are discussed in Chapter 2. It was found that mixing significantly affected the performance of the pilot plant scale digester ({approx}97 liter). The detailed mixing and hydrodynamics were investigated using computer automated radioactive particle tracking (CARPT) techniques, and are discussed in Chapter 3. A novel multiple particle tracking technique (MP-CARPT) technique that can track simultaneously up to 8 particles was developed, tested, validated, and implemented. Phase distribution was investigated using gamma ray computer tomography (CT) techniques, which are discussed in Chapter 4. A novel dual source CT (DSCT) technique was developed to measure the phase distribution of dyn

Washington University- St. Louis:; ,; Muthanna Al-Dahhan (Principal Investigator); E-mail: muthanna@wustl.edu; ,; Rajneesh Varma; Khursheed Karim; Mehul Vesvikar; Rebecca Hoffman; ,; Oak Ridge National Laboratory:; ,; David Depaoli, (Co-principal investigator); Email: depaolidw@ornl.gov; ,; Thomas Klasson; Alan L. Wintenberg; Charles W Alexander; Lloyd Clonts; ,; Iowa Energy Center; ,; ,; Norm Olson; Email: nolson@energy.iastate.edu

2007-03-26T23:59:59.000Z

12

Improved Multi-processor Scheduling for Flow Time and Energy  

E-Print Network [OSTI]

. To Prudence W. H. Wong October 29, 2009 Abstract Energy usage has been an important concern in recent research energy usage is dynamic speed scaling (see, e.g., [8, 14, 24, 28]) where the processor can vary its speedImproved Multi-processor Scheduling for Flow Time and Energy Tak-Wah Lam Lap-Kei Lee Isaac K. K

Wong, Prudence W.H.

13

Solar Power Purchase Agreements  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Solar Power Purchase Agreements Brian Millberg | Energy Manager, City of Minneapolis Direct Ownership * Financial: Even at 3kW installed cost, simple payback is 18 years (initial...

14

Green Power Purchase Plan  

Broader source: Energy.gov [DOE]

In April 2004, Connecticut's governor signed an executive order directing state-government agencies and universities to purchase an increasing amount of electricity generated by renewable resources...

15

Methods of Purchasing Purchasing methods include the different  

E-Print Network [OSTI]

" purchases must be reviewed and approved by the Controller's Office. This may result in the end user beingMethods of Purchasing Purchasing methods include the different processes of ordering goods and/or services, and encumbering funds. #12;Method of Purchase Field Purchase Orders (FPO) Accepted

16

Natural Gas Purchasing Options  

E-Print Network [OSTI]

As a result of economic and regulatory changes, the natural gas marketplace now offers multiple options for purchasers. The purpose of this panel is to discuss short-term purchasing options and how to take advantage of these options both to lower...

Watkins, G.

17

UNIVERSITYOFSOUTHFLORIDA Purchasing and PCard  

E-Print Network [OSTI]

that are open on July 1, 2014 will roll into FY 2014/2015. -All rolled POs that do not pass budget checking uponUNIVERSITYOFSOUTHFLORIDA Purchasing and PCard Year End Dates FY 2014-2015 June 21, 2014 PCard Last grant errors. July 7, 2014 Purchasing Requisitions and receipts can be entered for FY 2015 July 18, 2014

Meyers, Steven D.

18

LOUISIANA TECH UNIVERSITY PURCHASING OFFICE  

E-Print Network [OSTI]

LOUISIANA TECH UNIVERSITY PURCHASING OFFICE REQUEST FOR NON COMPETITIVE BID PROCESS OF LABORATORY: ___________________________________________________________________________________ ___________________________________________________________________________________ ___________________________________________________________________________________ 3. Relevance of purchase of items listed above to YOUR MISSION, PURPOSE, RESEARCH OR STUDY_______________________________________ Purchasing Dept _________________ Date 04/08/09 #12;

Selmic, Sandra

19

Purchased Gas Adjustment Rules (Tennessee)  

Broader source: Energy.gov [DOE]

The Purchased Gas Adjustment Rules are implemented by the Tennessee Regulatory Authority (Authority). Purchased Gas Adjustment (PGA) Rules are intended to permit the company/LDC (local gas...

20

Purchasing Policy and Procedures Page 1 Purchasing Policy and Procedures  

E-Print Network [OSTI]

Controller Responsible Offices: Purchasing Resource Services Controller's Office Origination Date: December 1Purchasing Policy and Procedures Page 1 4-1-2010 Purchasing Policy and Procedures Policy Statement are followed. Purchasing Resource Services (PRS), which is part of University Services, is the single point

Shahriar, Selim

Note: This page contains sample records for the topic "flow improvements purchasing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Purchasing in Texas Counties.  

E-Print Network [OSTI]

from every standpoint. As long as it continues, the purchasing power of the county dollar is sub- stantially reduced, for each company and individual must discount the county's warrants. In these counties, the necessity of developing and maintaining...8 r3' L \\, & #5, CnLpL"; 3' --%I k? TEXAS AGRICULTURAL EXPERIMENT STATION A. B. CONNER, Director College Station, Texas BULLETIN NO. 653 JULY 1944 PURCHASING IN TEXAS COUNTIES H. C. BRADSEAW and E. J, HERVEY Division of Farm and Ranch...

Hervey, E. J.; Bradshaw, H. C.

1944-01-01T23:59:59.000Z

22

Louisiana State University Purchasing Office  

E-Print Network [OSTI]

1 Louisiana State University Purchasing Office Vendor Enrollment Application Form Vendor Name changes to the LSU Purchasing Office. Taxpayer Identification Number (TIN) Certification [required] Check-To Address [required; used by LSU Purchasing to send solicitations, addenda, purchase orders, change orders

Harms, Kyle E.

23

COUNTERCURRENT FLOW LIMITATION EXPERIMENTS AND MODELING FOR IMPROVED REACTOR SAFETY  

SciTech Connect (OSTI)

This project is investigating countercurrent flow and ďfloodingĒ phenomena in light water reactor systems to improve reactor safety of current and future reactors. To better understand the occurrence of flooding in the surge line geometry of a PWR, two experimental programs were performed. In the first, a test facility with an acrylic test section provided visual data on flooding for air-water systems in large diameter tubes. This test section also allowed for development of techniques to form an annular liquid film along the inner surface of the ďsurge lineĒ and other techniques which would be difficult to verify in an opaque test section. Based on experiences in the air-water testing and the improved understanding of flooding phenomena, two series of tests were conducted in a large-diameter, stainless steel test section. Air-water test results and steam-water test results were directly compared to note the effect of condensation. Results indicate that, as for smaller diameter tubes, the flooding phenomena is predominantly driven by the hydrodynamics. Tests with the test sections inclined were attempted but the annular film was easily disrupted. A theoretical model for steam venting from inclined tubes is proposed herein and validated against air-water data. Empirical correlations were proposed for air-water and steam-water data. Methods for developing analytical models of the air-water and steam-water systems are discussed, as is the applicability of the current data to the surge line conditions. This report documents the project results from July 1, 2005 through June 30, 2008.

Vierow, Karen

2008-09-26T23:59:59.000Z

24

Purchasing Renewable Power  

Broader source: Energy.gov [DOE]

Federal agencies can purchase renewable power or renewable energy certificates (RECs) from a utility or other organization to meet Federal renewable energy requirements. Renewable power and RECs are good choices for facilities where on-site projects may be difficult or capital budgets are limited.

25

Solar Power Purchase Agreements | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Solar Power Purchase Agreements Solar Power Purchase Agreements Provides an overview of solar power purchase agreements including how they work, benefits and challenges and...

26

Riverside, CA Vehicle Purchase Incentives  

Broader source: Energy.gov [DOE]

City of Riverside residents and employees are eligible to receive a rebate toward the purchase of qualified natural gas or hybrid electric vehicles purchased from a City of Riverside automobile...

27

Towards improved methods for determining porous media multiphase flow functions  

E-Print Network [OSTI]

to the empirical relation by using the three-dimensional saturation and relaxation data. 7 CHAPTER II ESTIMATION OF POROUS MEDIA FLOW FUNCTIONS Multiphase flow functions are required to simulate the flow of multiple fluid phases through porous media....3) Snw + Sw = 1: (2.4) Together with boundary and initial conditions, Eqs. (2.1)-(2.4) provide a mathemat- ical model of three-dimensional, two-phase fluid flow in porous media. Several properties have to be specified in the above model. The densities...

Xue, Song

2004-09-30T23:59:59.000Z

28

Responsible University Officials: Director of Purchasing  

E-Print Network [OSTI]

Responsible University Officials: Director of Purchasing Controller Responsible Offices: Purchasing Resource Services Controller's Office Origination Date: December 1, 2008 Purchasing Policy - Quick Reference Guide The entire Purchasing Policy and Procedures document is available on the NU Portal

Kuzmanovic, Aleksandar

29

Gas flow means for improving efficiency of exhaust hoods  

DOE Patents [OSTI]

Apparatus is described for inhibiting the flow of contaminants in an exhaust enclosure toward an individual located adjacent an opening into the exhaust enclosure by providing a gas flow toward a source of contaminants from a position in front of an individual to urge said contaminants away from the individual toward a gas exit port. The apparatus comprises a gas manifold which may be worn by a person as a vest. The manifold has a series of gas outlets on a front face thereof facing away from the individual and toward the contaminants to thereby provide a flow of gas from the front of the individual toward the contaminants. 15 figures.

Gadgil, A.J.

1994-01-11T23:59:59.000Z

30

Improving web site security with data flow management  

E-Print Network [OSTI]

This dissertation describes two systems, RESIN and BFLow, whose goal is to help Web developers build more secure Web sites. RESIN and BFLOW use data flow management to help reduce the security risks of using buggy or ...

Yip, Alexander Siumann, 1979-

2009-01-01T23:59:59.000Z

31

Free Flow Power Partners to Improve Hydrokinetic Turbine Performance...  

Office of Environmental Management (EM)

as the device performed as expected, with no discernible harm to river-dwelling fish. Free Flow has also completed preliminary designs of utility-scale installations at a...

32

Improved Flow-Field Structures for Direct Methanol Fuel Cells  

SciTech Connect (OSTI)

The direct methanol fuel cell (DMFC) is ideal if high energy-density liquid fuels are required. Liquid fuels have advantages over compressed hydrogen including higher energy density and ease of handling. Although state-of-the-art DMFCs exhibit manageable degradation rates, excessive fuel crossover diminishes system energy and power density. Although use of dilute methanol mitigates crossover, the concomitant lowering of the gross fuel energy density (GFED) demands a complex balance-of-plant (BOP) that includes higher flow rates, external exhaust recirculation, etc. An alternative approach is redesign of the fuel delivery system to accommodate concentrated methanol. NuVant Systems Inc. (NuVant) will maximize the GFED by design and assembly of a DMFC that uses near neat methanol. The approach is to tune the diffusion of highly concentrated methanol (to the anode catalytic layer) to the back-diffusion of water formed at the cathode (i.e. in situ generation of dilute methanol at the anode layer). Crossover will be minimized without compromising the GFED by innovative integration of the anode flow-field and the diffusion layer. The integrated flow-field-diffusion-layers (IFDLs) will widen the current and potential DMFC operating ranges and enable the use of cathodes optimized for hydrogen-air fuel cells.

Gurau, Bogdan

2013-05-31T23:59:59.000Z

33

www.ResponsiblePurchasing.org Sustainable Purchasing 101  

E-Print Network [OSTI]

.ResponsiblePurchasing.org RPN Nonprofit, ~200 members ·States ·Local governments ·Federal agencies ·Colleges and universities.ResponsiblePurchasing.org EPPs are... · Made with recycled content · Highly energy efficient · Designed to be long lasting · Recyclable or compostable · Made from renewable resources · Less toxic than conventional goods · Manufactured

Escher, Christine

34

Coal flow aids reduce coke plant operating costs and improve production rates  

SciTech Connect (OSTI)

Chemical coal flow aids can provide many benefits to coke plants, including improved production rates, reduced maintenance and lower cleaning costs. This article discusses the mechanisms by which coal flow aids function and analyzes several successful case histories. 2 refs., 10 figs., 1 tab.

Bedard, R.A.; Bradacs, D.J.; Kluck, R.W.; Roe, D.C.; Ventresca, B.P.

2005-06-01T23:59:59.000Z

35

USING TIME-LAPSE SEISMIC MEASUREMENTS TO IMPROVE FLOW MODELING OF CO2 INJECTION  

E-Print Network [OSTI]

Marly. The EOR process in the RCP section of the Weyburn Field uses CO2 and water injection to displaceUSING TIME-LAPSE SEISMIC MEASUREMENTS TO IMPROVE FLOW MODELING OF CO2 INJECTION IN THE WEYBURN, particularly CO2. Time lapse seismic monitoring has motivated changes to the reservoir description in a flow

36

Understanding mechanisms of flow instability leads to improved control of  

E-Print Network [OSTI]

stability · Turbulence conditioning and boundary layer trimming in nozzle dramatically improves jet quality UC Berkeley data Re = 100,000 L/D = 44 Re = 75,000 L/D = 44 w/ conditioning w/o conditioning #12 Preserving Heat in the Air Temperature Rise in the Air Earth I.R.:Infra Red I.R. Absorption Sun Air I

Abdou, Mohamed

37

Louisiana Tech University Purchasing Department  

E-Print Network [OSTI]

of Education or Qualification Achieved: 1. State relevance of purchase to your mission, purpose, research Number: Web Site Address (if available) 5. If purchase related to compatibility with existing equipment, then identify the item(s) and applicable tag numbers(s) of State equipment: #12;6. SOLE SOURCE CONSIDERATIONS

Selmic, Sandra

38

POLICY: A:VPFA # / Purchasing Policy PROCEDURES  

E-Print Network [OSTI]

POLICY: A:VPFA # / Purchasing Policy PROCEDURES: APPENDIX: Approved: April 1, 2013 Revised: Cross References: Purchasing Policy Capital Projects and Renovations Policy Conflict of Interest Policy Sustainability Policy Green Procurement Policy 1 of 9 PROCEDURES: Purchasing Policy AUTHORITY: University

Martin, Jeff

39

City of Boulder- Green Power Purchasing  

Broader source: Energy.gov [DOE]

The City of Boulder purchases a portion of its electricity supply from wind power through Xcel Energy's Windsource program and Renewable Choice Energy, headquartered in Colorado. Boulder purchases...

40

Power Purchase Agreement Webinars | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Webinars Power Purchase Agreement Webinars Provides a listing of past power purchase agreement webinars and associated files. Author: U. S. Department of Energy, Energy Efficiency...

Note: This page contains sample records for the topic "flow improvements purchasing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

AE: Office Supplies Purchasing Stakeholder Survey Notes  

E-Print Network [OSTI]

AE: Office Supplies Purchasing Stakeholder Survey Notes Updated: 2/20/2012 Overview: · Survey Purchasing Factors: · 37% of people make office supplies purchases monthly, 26% weekly, and 15% quarterly used vendors for office supplies · People mostly purchase from vendors other than Staples due

Sheridan, Jennifer

42

TEXAS TECH UNIVERSITY Purchasing and Contracting Office  

E-Print Network [OSTI]

TEXAS TECH UNIVERSITY Purchasing and Contracting Office Justification of Property Purchases This form w designed to assist faculty and staff in justifying a proprietary or sole source purchase. A proprietary purchase is justifies only when equivalent limits consideration to one manufacturer, one product

Westfall, Peter H.

43

Improving Managed Environmental Water Use: Shasta River Flow and Temperature Modeling  

E-Print Network [OSTI]

i Improving Managed Environmental Water Use: Shasta River Flow and Temperature Modeling By SARAH and perhaps reduce some water management conflicts. Additional research for managing environmental water use manage water supplies and demands to increase water use efficiency through conservation, water markets

Lund, Jay R.

44

Interim Columbia and Snake rivers flow improvement measures for salmon: Final Supplemental Environmental Impact Statement (SEIS)  

SciTech Connect (OSTI)

Public comments are sought on this final SEIS, which supplements the 1992 Columbia River Salmon Flow Measures Options Analysis (OA)/Environmental Impact Statement (EIS). The Corps of Engineers, in cooperation with the Bonneville Power Administration and the Bureau of Reclamation proposes five alternatives to improve flows of water in the lower Columbia-Snake rivers in 1993 and future years to assist the migration of juvenile and adult anadromous fish past eight hydropower dams. These are: (1) Without Project (no action) Alternative, (2) the 1992 Operation, (3) the 1992 Operation with Libby/Hungry Horse Sensitivity, (4) a Modified 1992 Operation with Improvements to Salmon Flows from Dworshak, and (5) a Modified 1992 Operation with Upper Snake Sensitivity. Alternative 4, Modified 1992 Operations, has been identified as the preferred alternative.

Not Available

1993-03-01T23:59:59.000Z

45

FLORIDA ATLANTIC UNIVERSITY PURCHASING CARD PROGRAM Purchasing Card User Manual/University Agency Plan  

E-Print Network [OSTI]

's Office who administers the travel function and associated purchasing card Approver training. Billing1 FLORIDA ATLANTIC UNIVERSITY PURCHASING CARD PROGRAM Purchasing Card User Manual/University Agency and Cancellation B. Purchasing Card Limitations And Restrictions C. Cash Advances D. Purchasing Card Security E

Fernandez, Eduardo

46

MU PURCHASING CARD CARDHOLDER ENROLLMENT / CHANGE FORM  

E-Print Network [OSTI]

MU PURCHASING CARD CARDHOLDER ENROLLMENT / CHANGE FORM Action: ( ) Initial Enrollment ( ) Change/WBS/Internal Order # _________________________________________ Office Phone transaction limit Any increase in limits and type of charge (MCC Code) must be approved by the Purchasing

Hardy, Christopher R.

47

City of Madison- Green Power Purchasing  

Broader source: Energy.gov [DOE]

In 1999, Madisonís Metro Maintenance and Administration Facility began purchasing 25% of its electricity from Madison Gas and Electricís wind power program. The additional cost to purchase the wind...

48

MAST 1 purchased products--components. Final report  

SciTech Connect (OSTI)

AlliedSignal Inc., Kansas City Division, the production agency, was provided with funding to acquire purchased product components in support of the MAST (Multi-Application Surety Technology) Program. Implementation efforts, closing procurement status, and proposals for improvements in the procurement process are presented. The intent of this project was to fund the Purchased Product Team`s traditional procurement of components, with significantly reduced flowtime, in accordance with the Qualification Evaluation System, and to exercise the system to the extent possible. When funding was reduced, it became obvious that full implementation of the Qualification Evaluation System could not be achieved due to limited resources.

Brown, R.J.

1995-10-01T23:59:59.000Z

49

Purchasing Card (PCard) Program and User Guide  

E-Print Network [OSTI]

Purchasing Card (PCard) Program and User Guide Updated November 25, 2013 St. Francis Xavier University Visa¬ģ Purchasing Card #12;Purchasing Card (PCard) Program Guide November 25, 2013 Page 1 of 18.................................................................................................................................................2 Financial Services ¬≠ Business Office ¬≠ PCard Administrators

50

Appendix AC Exceptions to Delegated Purchasing Authority  

E-Print Network [OSTI]

Appendix AC Exceptions to Delegated Purchasing Authority Delegated purchasing authority for professions exempted by 18-4-132, MCA The following services are exempt from Purchasing Procedures per Montana provider - Expert witness hired for use in litigation, Hearings Officer hired in rulemaking and contested

Dyer, Bill

51

PSU Business Affairs Office Purchasing Office  

E-Print Network [OSTI]

PSU Business Affairs Office Purchasing Office Costco Warehouse Program CARD USER AGREEMENT For each to the PSU Purchasing Office by the following date/time:____________________________________________. All admittance and make purchases at Costco. These cards and the original receipt will be promptly returned

Caughman, John

52

Department of Geosciences Purchasing Card Policies & Procedures  

E-Print Network [OSTI]

, a department purchasing card is available in the Department of Geosciences Business Office. PCard Monthly the Business Office (i.e.: copying the PCard information for making future purchases) will result in immediate1 Department of Geosciences Purchasing Card Policies & Procedures The University of Arizona

Holliday, Vance T.

53

EIS-0163-S: Supplemental EIS/1993 Interim Columbia and Snake Rivers Flow Improvement Measures for Salmon  

Broader source: Energy.gov [DOE]

The U.S. Army Corps of Engineers Ė Walla Walla District has prepared this statement to assess alternatives to improve flows of water in the lower Columbia-Snake rivers in 1993 and future years to assist the migration of juvenile and adult anadromous fish past eight hydropower dams. The U.S. Department of Energyís Bonneville Power Administration served as a cooperating agency in developing this supplement due to its key role in direct operation of the integrated and coordinated Columbia-Snake River System, and adopted this statement in March of 1993. This statement supplements the 1992 Columbia River Salmon Flow Measures Options Analysis Environmental Impact Statement, which evaluated ways to alter water management operations in 1992 on the lower Columbia and Snake rivers to enhance the survival of wild Snake River salmon.

54

PROHIBITED PURCHASES for the Ames Laboratory Purchase Card  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006 TheSteven Ashby Dr. Steven Para buscar unaPROHIBITED PURCHASES for

55

PURCHASE ORDER TERMS AND CONDITIONS 1. Any purchase order issued by the Bowling Green State University Purchasing Department is a  

E-Print Network [OSTI]

University Purchasing Department is a binding contract between the Buyer, (Bowling Green State University correspondence to: Bowling Green State University, 103 Park Avenue, Attn: Purchasing Department, Bowling Green: Mail all invoices to Bowling Green State University, Accounts Payable, Room 319 Administration Building

Moore, Paul A.

56

Supply Chain Management Purchasing, Direct Pay and Travel  

E-Print Network [OSTI]

CBA section can be purchased with a CBA. Signatures Required for Travel (Dean's office policySupply Chain Management Purchasing, Direct Pay and Travel Purchasing ­ all purchases made by the University are governed by policy Note: Four uses of State General Funds are always prohibited: the purchase

57

Posted 3/22/13 PURCHASING AGENT  

E-Print Network [OSTI]

Posted 3/22/13 PURCHASING AGENT Our Chicago-based Food Service Company is seeking an experienced Comparison, Food Service/Food Wholesale experience · Proficient computer skills in MS Word, Excel and Outlook Purchasing Agent who will be responsible for the following: · Buying a large range of food items, including

Heller, Barbara

58

Table 22. Domestic Crude Oil First Purchase Prices for Selected...  

U.S. Energy Information Administration (EIA) Indexed Site

Form EIA-182, "Domestic Crude Oil First Purchase Report." 22. Domestic Crude Oil First Purchase Prices for Selected Crude Streams 44 Energy Information Administration...

59

The Greenhouse Gas Protocol Initiative: GHG Emissions from Purchased...  

Open Energy Info (EERE)

Purchased Electricity Jump to: navigation, search Tool Summary LAUNCH TOOL Name: The Greenhouse Gas Protocol Initiative: GHG Emissions from Purchased Electricity AgencyCompany...

60

Buy Energy-Efficient Products: A Guide for Federal Purchasers...  

Energy Savers [EERE]

Buy Energy-Efficient Products: A Guide for Federal Purchasers and Specifiers Buy Energy-Efficient Products: A Guide for Federal Purchasers and Specifiers Document encourages...

Note: This page contains sample records for the topic "flow improvements purchasing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Guide to Purchasing Green Power: Renewable Electricity, Renewable...  

Broader source: Energy.gov (indexed) [DOE]

Purchasing Green Power: Renewable Electricity, Renewable Energy Certificates, and On-Site Renewable Generation Guide to Purchasing Green Power: Renewable Electricity, Renewable...

62

Energy Department Issues Tribal Renewable Energy Purchase Guidance...  

Office of Environmental Management (EM)

Tribal Renewable Energy Purchase Guidance and Project Development Resources Energy Department Issues Tribal Renewable Energy Purchase Guidance and Project Development Resources...

63

Municipal Bond - Power Purchase Agreement Model Continues to...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Municipal Bond - Power Purchase Agreement Model Continues to Provide Low-Cost Solar Energy Municipal Bond - Power Purchase Agreement Model Continues to Provide Low-Cost Solar...

64

Power Purchase Agreement Checklist for State and Local Governments...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Checklist for State and Local Governments Power Purchase Agreement Checklist for State and Local Governments Provides a detailed guide to power purchase agreements for state and...

65

City of Bellingham- Green Power Purchasing  

Broader source: Energy.gov [DOE]

In July 2006, the Bellingham City Council adopted a policy to begin purchasing 100% green power for all facilities owned by the city -- one of the most aggressive such goals in the United States....

66

City of Chicago- Green Power Purchasing  

Broader source: Energy.gov [DOE]

In June 2001, the City of Chicago signed an agreement with Commonwealth Edison and the Environmental Resources Trust to purchase 20% of its electricity from clean, renewable resources by the end of...

67

City of Dallas- Green Energy Purchasing  

Broader source: Energy.gov [DOE]

In September 2007, the City of Dallas finalized purchase contracts for more than 333 million kilowatt-hours (kWh) of green electricity for city facilities during 2008. The city has elected to...

68

Important Idaho habitat now protected through purchase  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

River Wildlife Management Area just got bigger thanks to the 4.2 million purchase of Hammer Flat. The City of Boise, Idaho Department of Fish and Game, and the Bonneville Power...

69

Quick Guide: Power Purchase Agreements (Fact Sheet)  

SciTech Connect (OSTI)

Introduction to Federal power purchase agreements (PPAs), including available FEMP services and technical assistance as well as questions to ask when evaluating PPAs for a Federal renewable energy project.

Not Available

2011-07-01T23:59:59.000Z

70

Quick Guide: Power Purchase Agreements (Fact Sheet)  

SciTech Connect (OSTI)

Introduction to Federal power purchase agreements (PPAs), including available FEMP services and technical assistance as well as questions to ask when evaluating PPAs for a Federal renewable energy project.

Not Available

2010-06-01T23:59:59.000Z

71

City of Aspen- Green Power Purchasing  

Broader source: Energy.gov [DOE]

In 2005, the City of Aspen set a goal to purchase 75% of the city government's energy from renewable sources by 2010. As of December 2006, Aspen had accomplished its goal to provide 75% non-carbon...

72

City of Philadelphia- Green Power Purchasing  

Broader source: Energy.gov [DOE]

Philadelphia has committed to purchasing green power to supply 20% of the city's electricity by 2015.* In doing so, the city is exceeding the Pennsylvania Alternative Energy Portfolio Standard,...

73

Commodity/Vendor Purchasing Matrix Vendor Location  

E-Print Network [OSTI]

Commodity/Vendor Purchasing Matrix Commodity Vendor N am e and A ddress Vendor N am e in eVA Vendor sheets of paper and bring to business office for payment. Vendor Purchasing Matrix 090413 Page 1 of 4 #12;Commodity Vendor N am e and A ddress Vendor N am e in eVA Vendor Location in eVA PO C ategory eVA PO needed

Swaddle, John

74

GO GREEN! BUY GREEN! Introduction to Green Purchasing  

E-Print Network [OSTI]

for Existing Buildings Sustainable purchasing policy Green Cleaning policy (with purchasing requirements) #12 ­ Building products ­ Green meetings and conference services · Low or non-toxic or non-hazardous chemicalsGO GREEN! BUY GREEN! Introduction to Green Purchasing April 22nd, 2010 Karen Preston - Purchasing

Lafferriere, Gerardo

75

Title: Purchasing --Office Furnishings Standards Code: 5-400-020  

E-Print Network [OSTI]

Title: Purchasing -- Office Furnishings Standards Code: 5-400-020 Date: 4-1-92 Approved: JDM Policy Office furnishings purchases for all Boston College personnel, including faculty, are to conform contract screens or from the Purchasing Department directly. All office furnishings purchases

Huang, Jianyu

76

Bubble Size Control to Improve Oxygen-Based Bleaching: Characterization of Flow Regimes in Pulp-Water-Gas Three-Phase Flows  

SciTech Connect (OSTI)

Flow characteristics of fibrous paper pulp-water-air slurries were investigated in a vertical circular column 1.8 m long, with 5.08 cm diameter. Flow structures, gas holdup (void fraction), and the geometric and population characteristics of gas bubbles were experimentally investigated, using visual observation, Gamma-ray densitometry, and flash X-ray photography. Five distinct flow regimes could be visually identified: dispersed bubbly, layered bubbly, plug, churn-turbulent, and slug. Flow regime maps were constructed, and the regime transition lines were found to be sensitive to consistency. The feasibility of using artificial neural networks (ANNs) for the identification of the flow regimes, using the statistical characteristics of pressure fluctuations measured by a single pressure sensor, was demonstrated. Local pressure fluctuations at a station were recorded with a minimally-intrusive transducer. Three-layer, feed-forward ANNs were designed that could identify the four major flow patterns (bubbly, plug, churn, and slug) well. The feasibility of a transportable artificial neural network (ANN) - based technique for the classification of flow regimes was also examined. Local pressures were recorded at three different locations using three independent but similar transducers. An ANN was designed, trained and successfully tested for the classification of the flow regimes using one of the normalized pressure signals (from Sensor 1). The ANN trained and tested for Sensor 1 predicted the flow regimes reasonably well when applied directly to the other two sensors, indicating a good deal of transportability. An ANN-based method was also developed, whereby the power spectrum density characteristics of other sensors were adjusted before they were used as input to the ANN that was based on Sensor 1 alone. The method improved the predictions. The gas-liquid interfacial surface area concentration was also measured in the study. The gas absorption technique was applied, using CO2 as the transferred species and sodium hydroxide as the alkaline agent in water. Statistical analysis was performed to identify the parametric dependencies. The experimental data were empirically correlated.

S.M. Ghiaasiaan and Seppo Karrila

2006-03-20T23:59:59.000Z

77

Improving Surge Flow Irrigation Efficiency Based on Analysis of Infiltration and Hydrodynamic Effects  

E-Print Network [OSTI]

areas were: a) development of a surge flow infiltration model; b) the effect Or wetted perimeter on infiltration in furrow; c) design, construction, and calibration of a physical model of an irrigation border/furrow; and d) development of a surge flow...

Smerdon, Ernest T.; Blair, Allie W.

78

Ignition, cold flow improvers, additives offer options to boost diesel cetane  

SciTech Connect (OSTI)

The options of investing in processing for cetane improvement, whether modifications to existing units or the construction of new units, can be costly. Additives are used to improve cetane quality. Depending on the function of the additive, the effect can be either direct or indirect. The following sections discuss some of the available additives and their applications and costs.

Collins, J.M.; Unzelman, G.H.

1983-06-01T23:59:59.000Z

79

Improving electricity production in tubular microbial fuel cells through optimizing the anolyte flow with spiral spacers  

E-Print Network [OSTI]

Improving electricity production in tubular microbial fuel cells through optimizing the anolyte h l i g h t s " The spiral spacers improve electricity production in tubular microbial fuel cells fuel cells Spiral spacers Energy Wastewater treatment a b s t r a c t The use of spiral spacers

80

Purchase of High Performance Computing (HPC) Central Compute Resources  

E-Print Network [OSTI]

Purchase of High Performance Computing (HPC) Central Compute Resources by Northwestern Researchers summarizes High Performance Computing (HPC) compute resources that faculty engaged in research may purchase of code on the Quest high performance computing system. The installation cycles for new

Shull, Kenneth R.

Note: This page contains sample records for the topic "flow improvements purchasing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

NC State Office of Information Technology PURCHASE REQUEST FORM  

E-Print Network [OSTI]

NC State Office of Information Technology PURCHASE REQUEST FORM Voucher #: Req #: PO#: Other: SHIP North Carolina State University Office of Information Technology Office of Information Technology Campus Quantity Product Description Unit Price Extended Price _______PLEASE RUSH Small Purchase Shipping

Liu, Paul

82

Rigid or flexible accounting rules? : evidence from purchase price adjustments  

E-Print Network [OSTI]

I examine the negotiation of accounting rules in the purchase price adjustment clause of corporate acquisition agreements. Purchase price adjustments make the deal value contingent on the target's closing working capital ...

Johnson, Derek Christopher

2011-01-01T23:59:59.000Z

83

Large Industrial Renewable Energy Purchase Program (New Brunswick)  

Broader source: Energy.gov [DOE]

Beginning January 1, 2012 the Large Industrial Renewable Energy Purchase Program allows NB Power to purchase renewable energy generated by its largest customers at a rate of $95/MWh. This...

84

Page 1 of 4 REQUEST FOR SOLE SOURCE PURCHASE  

E-Print Network [OSTI]

of the Purchasing Office to determine if a proprietary designation can be applied. In order to make of sole source approval shall be made by the Purchasing Office. Signature APPROVAL ­ TO BE FILLED OUT BY THE PURCHASING OFFICE DETERMINATION: Approved Not Approved Rational

Ghosh, Joydeep

85

Business and Finance Purchasing Policy #2.21  

E-Print Network [OSTI]

Office of Business and Finance Purchasing Policy #2.21 Office of Business and Finance ­ Policies to the Office of Business and Finance, which delegates that authority to the Purchasing Department, which of Business and Finance Purchasing Policy #2.21 Office of Business and Finance ­ Policies and Procedures Page

86

L&S Deans' Office Purchase Request Form  

E-Print Network [OSTI]

L&S Deans' Office Purchase Request Form poses a risk to the University. The University has does not need to be by the original requestor of this purchase FOR OFFICE USE ONLY Approver: Cardholder://businessservices.berkeley.edu/HtmFiles/RestrictItems.htm) 2. One form may be used for multiple purchases from a single vendor. 3. Submit form to Blu

Mofrad, Mohammad R. K.

87

November 2011 Office Furniture Purchase Form for Small Dollar Transactions  

E-Print Network [OSTI]

November 2011 Office Furniture Purchase Form for Small Dollar Transactions As you know, the University is normally required to purchase office furniture from Maryland Correctional Enterprises, hopefully! We have good news! We now offer campus the flexibility to purchase office furniture from vendors

88

Gas Purchasing Strategies for the '90s  

E-Print Network [OSTI]

GAS PURCHASING STRATEGIES FOR THE '90S STEVEN H. SCHULER Manager-Acquisition & Contract Administration Houston Lighting & Power Company Houston, Texas The purpose of my talk today is to: 1. provide a brief summary of the structural... changes which have occurred in the natural gas market over the last several years 2. discuss some of the effects of these changes and some of the potential issues that could result from these changes, and 3. finally to offer some advice on how...

Schuler, S. H.

89

Bonneville Power Administration's Purchasing of Energy Savings  

E-Print Network [OSTI]

BONNEVILLE POWER ADMINISTRATION'S PURCHASE OF ENERGY SAVINGS Harold (Skip) Schick Leslie E. McMillan Bonneville Power Administration Port1and, Oregon INTRODUCTION The Bonneville Power Administration (BPA) is conducting a commercial... buildings retrofit program in the Pacific Northwest by making pay ments to a sponsor, such as an energy serv ice company or architectural and engineering firm, for energy savings which actually occur in a commercial building. This effort is one...

Schick, H.

90

Green Purchasing under DOE Architect Engineer Contracts  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensional Subject: GuidanceNotGrandPurchasing under DOE Architect Engineer

91

When to Purchase Premium Efficiency Motors  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage ¬Ľof| Department ofDepartment ofAnnouncement |Renewableisto Purchase Premium

92

Energy Intense Equipment Purchasing Behaviour: A Review of the Literature i How do consumers and firms purchase equipment  

E-Print Network [OSTI]

Energy Intense Equipment Purchasing Behaviour: A Review of the Literature i CIEEDAC How do, 2007 #12;Energy Intense Equipment Purchasing Behaviour: A Review of the Literature ii Executive Summary Energy intense equipment purchasing behaviour: A review of the literature. CIEEDAC has been charged

93

Sustainable (Green) Purchasing -Our Commitment The University of Pittsburgh is committed to environmental stewardship through sustainable  

E-Print Network [OSTI]

Sustainable (Green) Purchasing - Our Commitment ......................................................... The University of Pittsburgh is committed to environmental stewardship through sustainable purchasing purchasing processes seek to balance the following objectives: Increase the purchase of sustainable products

Jiang, Huiqiang

94

IMPROVING ENERGY EFFICIENCY VIA OPTIMIZED CHARGE MOTION AND SLURRY FLOW IN PLANT SCALE SAG MILLS  

SciTech Connect (OSTI)

The U.S. mining industry operates approximately 80 semi-autogenesis grinding mills (SAG) throughout the United States. Depending on the mill size the SAG mills draws between 2 MW and 17 MW. The product from the SAG mill is further reduced in size using pebble crushers and ball mills. Hence, typical gold or copper ore requires between 2.0 and 7.5 kWh per ton of energy to reduce the particle size. Considering a typical mining operation processes 10,000 to 100,000 tons per day the energy expenditure in grinding is 50 percent of the cost of production of the metal. A research team from the University of Utah is working to make inroads into saving energy in these SAG mills. In 2003, Industries of the Future Program of the Department of Energy tasked the University of Utah team to build a partnership between the University and the mining industry for the specific purpose of reducing energy consumption in SAG mills. A partnership was formed with Cortez Gold Mines, Kennecott Utah Copper Corporation, Process Engineering Resources Inc. and others. In the current project, Cortez Gold Mines played a key role in facilitating the 26-ft SAG mill at Cortez as a test mill for this study. According to plant personnel, there were a number of unscheduled shut downs to repair broken liners and the mill throughput fluctuated depending on ore type. The University team had two softwares, Millsoft and FlowMod to tackle the problem. Millsoft is capable of simulating the motion of charge in the mill. FlowMod calculates the slurry flow through the grate and pulp lifters. Based on this data the two models were fine-tuned to fit the Cortez SAG will. In the summer of 2004 a new design of shell lifters were presented to Cortez and in September 2004 these lifters were installed in the SAG mill. By December 2004 Cortez Mines realized that the SAG mill is drawing approximately 236-kW less power than before while maintaining the same level of production. In the first month there was extreme cycling and operators had to learn more. Now the power consumption is 0.3-1.3 kWh/ton lower than before. The actual SAG mill power draw is 230-370 kW lower. Mill runs 1 rpm lesser in speed on the average. The re-circulation to the cone crusher is reduced by 1-10%, which means more efficient grinding of critical size material is taking place in the mill. All of the savings have resulted in reduction of operating cost be about $0.023-$0.048/ ton.

Raj K. Rajamani; Sanjeeva Latchireddi; Sravan K. Prathy; Trilokyanath Patra

2005-12-01T23:59:59.000Z

95

Power Purchase Agreements | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in3.pdfEnergyDepartment ofOil'sof Energy Jun Luof EmergencyMeteringPower Purchase

96

Property:Purchasers | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revisionEnvReviewNonInvasiveExploration Jump to:FieldProceduresFY Description Property NameProjectNamePurchasers

97

Green Power Purchasing | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating Solar Power BasicsGermany: Energy ResourcesNews Home > BlogsPurchasing Jump to:

98

Purchase, Delivery, and Storage of Gases  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedlesAdvancedJanuary 13, 2011Portal Energy ForPurchase,

99

Green events Guide Minimize promotional items and avoid unnecessary purchases. If you decide to purchase  

E-Print Network [OSTI]

Housing (for summer conferences) ¬Ľ Educational Resources for Waste Management: PSU Recycles! ¬Ľ Graphic. Choose more sustainable materials (non-toxic, recycled content, organic cotton, vege- table-based inks, fair trade, etc.). ¬∑ Helpful questions to consider when making purchases: ¬Ľ Is this product recyclable

Caughman, John

100

Improved Predictions of Carbon Tetrachloride Contaminant Flow and Transport: Implementation of Kinetic Volatilization and Multicomponent NAPL Behavior  

SciTech Connect (OSTI)

Carbon tetrachloride (CT) was discharged to waste sites that are included in the 200-PW-1 Operable Unit in Hanford 200 West Area. Fluor Hanford, Inc. is conducting a Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) remedial investigation/feasibility study (RI/FS) for the 200-PW-1 Operable Unit. The RI/FS process and remedial investigations for the 200-PW-1, 200 PW-3, and 200-PW-6 Operable Units are described in the Plutonium/Organic-Rich Process Condensate/Process Waste Groups Operable Unit RI/FS Work Plan. As part of this overall effort, Pacific Northwest National Laboratory (PNNL) was contracted to improve the STOMP simulator (White and Oostrom, 2006) by incorporating kinetic volatilization of nonaqueous phase liquids (NAPL) and multicomponent flow and transport. This work supports the U.S. Department of Energy's (DOE's) efforts to characterize the nature and distribution of CT in the 200 West Area and subsequently select an appropriate final remedy. Previous numerical simulation results with the STOMP simulator have overestimated the effect of soil vapor extraction (SVE) on subsurface CT, showing rapid removal of considerably more CT than has actually been recovered so far. These previous multiphase simulations modeled CT mass transfer between phases based on equilibrium partitioning. Equilibrium volatilization can overestimate volatilization because mass transfer limitations present in the field are not considered. Previous simulations were also conducted by modeling the NAPL as a single component, CT. In reality, however, the NAPL mixture disposed of at the Hanford site contained several non-volatile and nearly insoluble organic components, resulting in time-variant fluid properties as the CT component volatilized or dissolved over time. Simulation of CT removal from a DNAPL mixture using single-component DNAPL properties typically leads to an overestimation of CT removal. Other possible reasons for the discrepancy between observed and simulated CT mass removal during SVE are differences between the actual and simulated (1) SVE flow rates, (2) fluid-media properties, and (3) disposal history (volumes, rates, and timing). In this report, numerical implementation of kinetic volatilization and multicomponent DNAPL flow and transport into the STOMP simulator (White and Oostrom, 2006) is described. The results of several test cases are presented and explained. The addition of these two major code enhancements increases the ability of the STOMP simulator to model complex subsurface flow and transport processes involving CT at the Hanford site.

Oostrom, Martinus; Zhang, Z. F.; Freedman, Vicky L.; Tartakovsky, Guzel D.

2008-09-29T23:59:59.000Z

Note: This page contains sample records for the topic "flow improvements purchasing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Issues in Purchasing and Maintaining Intrinsic Standards  

SciTech Connect (OSTI)

Intrinsic standards are widely used in the metrology community because they realize the best level uncertainty for many metrology parameters. For some intrinsic standards, recommended practices have been developed to assist metrologists in the selection of equipment and the development of appropriate procedures in order to realize the intrinsic standard. As with the addition of any new standard, the metrology laboratory should consider the pros and cons relative to their needs before purchasing the standard so that the laboratory obtains the maximum benefit from setting up and maintaining these standards. While the specific issues that need to be addressed depend upon the specific intrinsic standard and the level of realization, general issues that should be considered include ensuring that the intrinsic standard is compatible with the laboratory environment, that the standard is compatible with the current and future workload, and whether additional support standards will be required in order to properly maintain the intrinsic standard. When intrinsic standards are used to realize the best level of uncertainty for a specific metrology parameter, they usually require critical and important maintenance activities. These activities can including training of staff in the system operation, as well as safety procedures; performing periodic characterization measurements to ensure proper system operation; carrying out periodic intercomparisons with similar intrinsic standards so that proper operation is demonstrated; and maintaining control or trend charts of system performance. This paper has summarized many of these important issues and therefore should be beneficial to any laboratory that is considering the purchase of an intrinsic standard.

PETTIT,RICHARD B.; JAEGER,KLAUS; EHRLICH,CHARLES D.

2000-09-12T23:59:59.000Z

102

Highly Insulating Windows Volume Purchase Program Final Report  

SciTech Connect (OSTI)

This report summarizes the Highly Insulating Windows Volume Purchase Program, conduced by PNNL for DOE-BTP, including a summary of outcomes and lessons learned.

Parker, Graham B.; Mapes, Terry S.; Zalis, WJ

2013-02-01T23:59:59.000Z

103

NREL-Third-Party Financing and Power Purchasing Agreements for...  

Open Energy Info (EERE)

LAUNCH TOOL Name: Third-Party Financing and Power Purchasing Agreements for Public Sector PV Projects AgencyCompany Organization: National Renewable Energy Laboratory Partner:...

104

GovEnergy 2008 Session Presentation on Power Purchase Agreements...  

Broader source: Energy.gov (indexed) [DOE]

Development Team Project Participants 3 Phases Energy Services - Project Developer First Solar - Thin Film Solar Panels SunTechnics - Design & Install XCEL purchased RECs CSU to...

105

Pallets of PV: Communities Purchase Solar and Drive Down Costs...  

Open Energy Info (EERE)

A Community Guide to Collective Purchasing of Residential PV Systems." Northwest Sustainable Energy for Economic Development (Northwest SEED), May. Groups: OpenEI Community...

106

Third-Party Financing and Power Purchase Agreements for Public...  

Broader source: Energy.gov (indexed) [DOE]

of power purchase agreements, specifically as they relate to public sector solar photovoltaic projects. Author: National Renewable Energy Laboratory tapwebinar20090527coughli...

107

Danny Lloyd Supply Purchasing Manager & Jlab Small Business...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Danny Lloyd Supply Purchasing Manager & Jlab Small Business Program Manager JSA Mentor-Protg Program Thomas Jefferson National Accelerator Facility Newport, News, Virginia...

108

Table 21. Domestic Crude Oil First Purchase Prices  

U.S. Energy Information Administration (EIA) Indexed Site

Information Administration Petroleum Marketing Annual 1995 41 Table 21. Domestic Crude Oil First Purchase Prices (Dollars per Barrel) - Continued Year Month PAD District II...

109

Table 21. Domestic Crude Oil First Purchase Prices  

U.S. Energy Information Administration (EIA) Indexed Site

Information AdministrationPetroleum Marketing Annual 1998 41 Table 21. Domestic Crude Oil First Purchase Prices (Dollars per Barrel) - Continued Year Month PAD District II...

110

Table 22. Domestic Crude Oil First Purchase Prices for Selected...  

U.S. Energy Information Administration (EIA) Indexed Site

company data. Source: Energy Information Administration, Form EIA-182, "Domestic Crude Oil First Purchase Report." 44 Energy Information AdministrationPetroleum Marketing Annual...

111

Table 22. Domestic Crude Oil First Purchase Prices for Selected...  

U.S. Energy Information Administration (EIA) Indexed Site

company data. Source: Energy Information Administration, Form EIA-182, "Domestic Crude Oil First Purchase Report." 44 Energy Information Administration Petroleum Marketing...

112

Appendix S-50 - Power Purchase Agreement (PPA) - Public Utilities...  

Open Energy Info (EERE)

Power Purchase Agreement (PPA) - Public Utilities Commission Jump to: navigation, search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - Instructions:...

113

Third Party Financing and Power Purchasing Agreements for Public...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

and Power Purchase Agreements for public sector PV projects presented at the TAP Web Seminar on May 27, 2009, includes economic and legal information. Third Party Financing...

114

Revisiting the Income Effect: Gasoline Prices and Grocery Purchases  

E-Print Network [OSTI]

Sold On Sale and Retail Gasoline Prices Log % Purchased Onhigher gasoline prices into retail prices, by investigatingexcluding California average retail gasoline price for all

Gicheva, Dora; Hastings, Justine; Villas-Boas, Sofia B

2008-01-01T23:59:59.000Z

115

Allowable Expenses on the UNC Charlotte Purchasing Card  

E-Print Network [OSTI]

or Independent Contractor Services) Food Purchases (restaurant, catering, bakery, grocery store) Gift/Space Rental Express Mail Service and Freight Magazine and Journal Subscriptions Promotional Items Computer gasoline purchases o Tax (including tip) Hotel Expenses o Room and Tax o Business-related internet service

Xie,Jiang (Linda)

116

Voluntary Carbon Confusion: A Consumer's Guide to Purchasing Carbon Offsets  

E-Print Network [OSTI]

Voluntary Carbon Confusion: A Consumer's Guide to Purchasing Carbon Offsets and Renewable Energy 4 Report Introduction 5 Product Types 5 A. Carbon Offsets 5 B. Certified Emission Reductions (CERs. Voluntary Carbon Confusion: A Consumer's Guide to Purchasing Carbon Offsets and Renewable Energy

Hoffman, Andrew J.

117

Purchasing Department PCard Update Form Change Cardholder Information  

E-Print Network [OSTI]

Purchasing Department PCard Update Form ­ Change Cardholder Information Cardholder Information: ______________________________________________________________________________ *Please note that if you are changing your legal name, a new purchasing card reflecting the new name will be ordered and delivered to your office, at the address you specify above, in 6-8 business days. I have

Tipple, Brett

118

Purchasing coastal real estate in hawai`i  

E-Print Network [OSTI]

Purchasing coastal real estate in hawai`i a Practical guide of common Questions and answers august 2006 natural hazard considerations for #12;a Practical guide of common Questions and answers Purchasing, Office of Conservation and Coastal Lands Coastal Zone Management Program State of Hawai`i Office

Wang, Yuqing

119

UNIVERSITY OF TORONTO PURCHASING CHARGE CARD REQUEST FORM & ACKNOWLEDGEMENT OF  

E-Print Network [OSTI]

and the Card Program Administrator immediately. Furthermore, I understand that this Card is the property duties in connection with the university, and I will not use the Card to make any personal purchases. I fully understand that purchases made using this Card are to be authorized by a departmental manager

120

C:\\Documents and Settings\\rpriesmeyer\\My Documents\\Word\\FAMIS Purchasing Guidelines.doc FAMIS Purchasing Guidelines  

E-Print Network [OSTI]

C:\\Documents and Settings\\rpriesmeyer\\My Documents\\Word\\FAMIS Purchasing Guidelines.doc FAMIS Purchasing Guidelines We are now utilizing the FAMIS (Financial Accounting Information Systems) State of measure & unit price of each item) · Indicate if there is a separate charge for shipping and handling

Behmer, Spencer T.

Note: This page contains sample records for the topic "flow improvements purchasing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Purchasing Compost Compost, the end product of a controlled decomposition of plant and animal wastes, makes an excellent addition  

E-Print Network [OSTI]

Purchasing Compost Compost, the end product of a controlled decomposition of plant and animal wastes, makes an excellent addition to lawn or garden soil. Adding compost to your soil helps improve both its drainage and waterholding properties. Compost stores plant nutrients and prevents them from

New Hampshire, University of

122

Table 23. Domestic Crude Oil First Purchase Prices by API Gravity  

U.S. Energy Information Administration (EIA) Indexed Site

Form EIA-182, "Domestic Crude Oil First Purchase Report." 23. Domestic Crude Oil First Purchase Prices by API Gravity Energy Information Administration Petroleum...

123

E-Print Network 3.0 - aircraft purchase rights Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Storage, Conversion and Utilization 15 B. Purchasing Surplus Property Acquisition and Disposal Summary: B. Purchasing Surplus Property Acquisition and Disposal B-12 SURPLUS...

124

DOE to Issue Second Solicitation for Purchase of Crude Oil for...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Issue Second Solicitation for Purchase of Crude Oil for the Strategic Petroleum Reserve DOE to Issue Second Solicitation for Purchase of Crude Oil for the Strategic Petroleum...

125

On-Site Renewable Power Purchase Agreements | Department of Energy  

Office of Environmental Management (EM)

On-site renewable power purchase agreements (PPAs) allow Federal agencies to fund on-site renewable energy projects with no up-front capital costs incurred. With a PPA, a developer...

126

Minimum Purchase Price Regulations (Prince Edward Island, Canada)  

Broader source: Energy.gov [DOE]

The Minimum Purchase Price Regulations establish the price which utilities must pay for power produced by large-scale renewable energy generators Ė that is those capable of producing more than 100...

127

Government Practices in purchasing R&D: Intellectual Property...  

Broader source: Energy.gov (indexed) [DOE]

Practices in Purchasing R&D: Intellectual Property Provisions at the Department of Energy Paul Gottlieb Assistant General Counsel for Tech. Transfer & IP 202-586-3439 (fax 2805)...

128

Boulder Valley School District (Colorado) Power Purchase Agreement...  

Broader source: Energy.gov (indexed) [DOE]

Boulder Valley School District completed a power purchase agreement to install 1.4 MW of solar PV that are expected to reduce electricity bills in 14 schools by about 10% over the...

129

Table 21. Domestic Crude Oil First Purchase Prices  

U.S. Energy Information Administration (EIA) Indexed Site

19.11 18.73 18.63 17.97 18.75 18.10 See footnotes at end of table. 21. Domestic Crude Oil First Purchase Prices Energy Information Administration Petroleum Marketing Annual...

130

Low Standby Power Product Purchasing Requirements and Compliance...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

it is in the lowest power-consuming mode-typically when it is switched off. Federal agencies are required to purchase information technology (IT) and electronic products with a...

131

Microsoft Word - ProvisionsFundsColvilleConfederatedTribesPurchaseLoup...  

Broader source: Energy.gov (indexed) [DOE]

Confederated Tribes for purchase of the Loup Loup Creek and Aeneas Creek properties. Fish and Wildlife Project No.: 2008-104-00 Categorical Exclusion Applied (from Subpart D, 10...

132

Third-Party Financing and Power Purchase Agreements for Public...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Web Seminar May 27th, 2009 Jason Coughlin Third-Party Financing and Power Purchase Agreements for Public Sector PV Projects 2 Disclaimer The PPA is a very legally intensive...

133

Economical Energy Storage Option Enhances Energy Purchasing Strategies  

E-Print Network [OSTI]

Chilled Water Thermal Energy Storage (TES) offers benefits to both the electricity supplier and the electricity user. This well-established technology uses stratified chilled water to store energy in thermal form so that electricity can be purchased...

Hansen, D. W.; Winters, P. J.

134

Sample Documents for On-Site Renewable Power Purchase Agreements  

Broader source: Energy.gov [DOE]

The Federal Energy Management Program (FEMP) works with Federal agencies and partners to assemble sample documents from past on-site renewable power purchase agreement (PPA) projects to help streamline the PPA process.

135

City of Grand Rapids- Green Power Purchasing Policy  

Broader source: Energy.gov [DOE]

In 2005, the City of Grand Rapids established a goal of purchasing 20% of its municipal power demand from renewable energy by 2008. In November 2007, the city signed a three-year agreement with a...

136

Commercial Air-Source Heat Pumps, Purchasing Specifications for Energy-Efficient Products (Fact Sheet)  

SciTech Connect (OSTI)

Energy efficiency purchasing specifications for federal procurements of commercial air-source heat pumps.

Not Available

2011-02-11T23:59:59.000Z

137

Commercial Central Air Conditioners, Purchasing Specifications for Energy-Efficient Products (Fact Sheet)  

SciTech Connect (OSTI)

Energy efficiency purchasing specifications for federal procurements of commercial central air conditioners.

Not Available

2011-02-01T23:59:59.000Z

138

Residential Dishwashers, Purchasing Specifications for Energy-Efficient Products (Fact Sheet)  

SciTech Connect (OSTI)

Performance and purchasing specifications for residential dishwashers under the FEMP-designated product program.

Not Available

2010-06-01T23:59:59.000Z

139

Copy 1 Purchasing Copy 2 Residence Hall Director Request for Reimbursement  

E-Print Network [OSTI]

copy to the Purchasing Office. 3. The Purchasing Director will review the "Request for RequestCopy 1 ­ Purchasing Copy 2 ­ Residence Hall Director MU 6/94 Request for Reimbursement For Damages: _________________________________________________________________________________________ _________________________________________________________________________________________ _________________________________________________________________________________________ #12;Copy 1 ­ Purchasing Copy 2 ­ Residence Hall Director PROCEDURES FOR REQUESTING REIMBURSEMENT

Hardy, Christopher R.

140

Air-Cooled Electric Chillers, Purchasing Specifications for Energy-Efficient Products (Fact Sheet)  

SciTech Connect (OSTI)

Energy efficiency purchasing specifications for federal procurements of air-cooled electric chillers.

Not Available

2010-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "flow improvements purchasing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Clothes Washers, Purchasing Specifications for Energy-Efficient Products (Fact Sheet)  

SciTech Connect (OSTI)

Performance and purchasing specifications for residential clothes washers under the FEMP-designated product program.

Not Available

2010-06-01T23:59:59.000Z

142

Commercial Gas Water Heaters, Purchasing Specifications for Energy-Efficient Products (Fact Sheet)  

SciTech Connect (OSTI)

Performance and purchasing specifications for commercial gas water heaters under the FEMP-designated product program.

Not Available

2010-09-01T23:59:59.000Z

143

UO Purchasing & Contracting Services rev: August 13, 2012 Text Requirements for Level 1 and Level 2 Signature Authority Purchase Orders and Invoices.  

E-Print Network [OSTI]

UO Purchasing & Contracting Services rev: August 13, 2012 Text Requirements for Level 1 and Level 2 the payment is due and payable (may be same person exercising L1SA)] · Either: 1. List contract # or purchase number); of 2. If you do not have a written contract or purchase order, generally describe what goods and

144

UO Purchasing & Contracting Services rev: August 19, 2014 Text Requirements for Level 1 and Level 2 Contracting Authority Purchase Orders and Invoices.  

E-Print Network [OSTI]

UO Purchasing & Contracting Services rev: August 19, 2014 Text Requirements for Level 1 and Level 2 Contracting Authority Purchase Orders and Invoices. Purchase Orders - Level 1 Contracting Authority: · L1CA [Insert on First Line of Document Text] · [name of individual exercising Level 1 Contracting Authority

145

A Seminal Case Study on Application of Last Planner System with Cash Flow Data for Improvements in Construction Management Practices  

E-Print Network [OSTI]

by Results (MBR), and analyzes a case where these two theories are combined with the goal of improving construction practices. This research compares an eight month schedule in a construction project and relates Percentage of Planned activities Completed...

Lagoo, Nishi

2012-07-16T23:59:59.000Z

146

Design and implementation of a continuous improvement framework, focusing on material and information flow, for the manufacturing of organic photovoltaics  

E-Print Network [OSTI]

Konarka Technologies is an organic photo voltaic solar panel manufacturing startup and is currently in the process of ramping up their production volumes. The MIT team has worked on numerous improvement activities that ...

Gogineni, Susheel Teja

2011-01-01T23:59:59.000Z

147

Main Campus Emissions In 2007, Yale purchased the  

E-Print Network [OSTI]

Main Campus Emissions In 2007, Yale purchased the Bayer Pharmaceutical campus to expand the University's science and medical research. The 2005 baseline represents emissions when Bayer was operating,899 4,623 31,280 39,260 MAIN CAMPUS EMISSIONS WEST CAMPUS EMISSIONS 2014 2005 2014 2005 University Fleet

148

UV Pasteurization of Cider USDA Apple Juice Purchases  

E-Print Network [OSTI]

1 UV Pasteurization of Cider USDA Apple Juice Purchases New Zealand Tour Pruning Grapes Pruning Referendum Child Labor Restrictions 2000 Spray Guides New Bramble Publication Imidan Under Threat Return December and by late January had set in solidly. Sub-zero temperatures were reported across the northern

Ginzel, Matthew

149

Title: Purchasing --University Bidding Policy Code: 5-400-005  

E-Print Network [OSTI]

Purchasing's scope of operation, the qualification of potential bidders, the solicitation and analysis manufacturer, or a sole or preferred source as the supplier of a product or service that must be bid justification for the request, including evaluations of the product or service and the supplier

Huang, Jianyu

150

STANDARD TERMS OF PURCHASE APPLICABLE TO SUPPLY AND SERVICES CONTRACTS  

E-Print Network [OSTI]

STANDARD TERMS OF PURCHASE APPLICABLE TO SUPPLY AND SERVICES CONTRACTS ENTERED INTO BY SUD TOULON and its co-contracting parties for all government supplies and services contracts entered into pursuant supply and services contracts in its version annexed to the Decree of 19 January 2009 approving

Chamroukhi, Faicel

151

Thank you for purchasing a York University Parking Permit  

E-Print Network [OSTI]

84, determined at time of purchase, 24 hours daily. Motorcycle Allows you to park your motorcycle in any Unreserved Lot or designated motorcycle area, 24 hours daily. Day Unreserved/Evening Reserved in Reserved lots A-Lot 4 and B-Lot 5 from 4pm to 7:30am and 24 hours daily on weekends. Motorcycle Allows you

152

Using government purchasing power to reduce equipment standby power  

SciTech Connect (OSTI)

Although the government sector represents only 10 to 15 percent of the economy in most countries, carefully targeted public procurement can play a significant role in market transformation through its influence on both buyers and suppliers. Government leadership in energy-efficient purchasing can set an example for other buyers, while creating opportunities for leading manufacturers and distributors to increase their sales and market share by offering energy-efficient products at competitive prices. Under proper circumstances, a highly visible government purchasing policy can have a disproportionately large influence on the market for efficient products. In the United States, President Bush signed an Executive Order in 2001 directing all federal agencies to buy products with low standby power (1 watt or less where possible). This represents a deliberate choice to use government purchasing - rather than regulations or incentives - as a market-based strategy to encourage energy savings. It also builds upon existing efforts to encourage Federal purchase of energy-efficient products (Energy Star products and others in the top 25th percentile of efficiency). This paper summarizes the Federal Energy Management Program s first 18 months of experience in implementing this Executive Order, including analysis of data on standby power, interactions with manufacturers and industry groups, and the relationship between these efforts and other federal programs concerning product labelling, testing, rating, and efficiency standards. After five years of implementing low-standby power purchasing, we estimate energy savings for federal agencies alone at about 230 GWh/year (worth US$14 million), with spillover effects on the broader market that will save all US consumers nearly 4000 GWh/year (US$300 million).

Harris, Jeffrey; Meier, Alan; Bartholomew, Emily; Thomas, Alison; Glickman, Joan; Ware Michelle

2003-03-03T23:59:59.000Z

153

Use of the GranuFlow Process in Coal Preparation Plants to Improve Energy Recovery and Reduce Coal Processing Wastes  

SciTech Connect (OSTI)

With the increasing use of screen-bowl centrifuges in today's fine coal cleaning circuits, a significant amount of low-ash, high-Btu coal can be lost during the dewatering step due to the difficulty in capturing coal of this size consist (< 100 mesh or 0.15mm). The GranuFlow{trademark} technology, developed and patented by an in-house research group at DOE-NETL, involves the addition of an emulsified mixture of high-molecular-weight hydrocarbons to a slurry of finesized coal before cleaning and/or mechanical dewatering. The binder selectively agglomerates the coal, but not the clays or other mineral matter. In practice, the binder is applied so as to contact the finest possible size fraction first (for example, froth flotation product) as agglomeration of this fraction produces the best result for a given concentration of binder. Increasing the size consist of the fine-sized coal stream reduces the loss of coal solids to the waste effluent streams from the screen bowl centrifuge circuit. In addition, the agglomerated coal dewaters better and is less dusty. The binder can also serve as a flotation conditioner and may provide freeze protection. The overall objective of the project is to generate all necessary information and data required to commercialize the GranuFlow{trademark} Technology. The technology was evaluated under full-scale operating conditions at three commercial coal preparation plants to determine operating performance and economics. The handling, storage, and combustion properties of the coal produced by this process were compared to untreated coal during a power plant combustion test.

Glenn A. Shirey; David J. Akers

2005-12-31T23:59:59.000Z

154

Purchasing and Materials Management Organization, Sandia National Laboratories annual report, fiscal year 1993  

SciTech Connect (OSTI)

This report summarizes the purchasing and transportation activities of the Purchasing and Materials Management Organization for Fiscal Year 1993. Activities for both the New Mexico and California locations are included.

Martin, D.R.

1994-02-01T23:59:59.000Z

155

PURCHASE REQUEST FORM (Rev. 8/6/14) Vendor: Date: Date Required  

E-Print Network [OSTI]

PURCHASE REQUEST FORM (Rev. 8/6/14) Shortcode Vendor: Date: Date Required: Vendor # (if known attachments/quotes from the Vendor to CEE-Purchasing@umich.edu. For Non-M-Marketsite orders only. Once

Eustice, Ryan

156

School of Architecture and Allied Arts Computer Plan to Purchase Form  

E-Print Network [OSTI]

School of Architecture and Allied Arts Computer Plan to Purchase Form DATE: May 8, 2013 TO: Financial Assistance for Required Computer Purchase The departments of Architecture and Landscape: Students majoring in Architecture, Landscape Architecture, Digital Arts and Product Design SUBJECT

157

Whole-Home Gas Tankless Water Heaters, Purchasing Specifications for Energy-Efficient Products (Fact Sheet)  

SciTech Connect (OSTI)

Performance and purchasing specifications for whole-home gas water heaters under the FEMP-designated product program.

Not Available

2010-06-01T23:59:59.000Z

158

UMBC POLICY ON REIMBURSEMENT FOR BUSINESS MEALS AND PURCHASE OF FOOD SERVICES OTHER THAN EMPLOYEE TRAVEL  

E-Print Network [OSTI]

UMBC POLICY ON REIMBURSEMENT FOR BUSINESS MEALS AND PURCHASE OF FOOD SERVICES OTHER THAN EMPLOYEE and the purchase of food services is intended to define the conditions under which the University will pay directly The purpose of this document is to describe allowable meal and food service purchases using University funds

Adali, Tulay

159

Policy Title: Purchasing Card HARVARD UNIVERSITY FINANCIAL POLICY Responsible Office: UFS  

E-Print Network [OSTI]

Policy Title: Purchasing Card HARVARD UNIVERSITY FINANCIAL POLICY Responsible Office: UFS Effective Date: April 1, 2010 Revision Date:PURCHASING CARD Policy Number: UFS100 HARVARD UNIVERSITY FINANCIAL POLICY POLICY STATEMENT Harvard Purchasing Cards (PCards) are University-liability credit cards issued

160

To: Officers, Deans, Department Heads, and Department Administrators From: Diane Devlin, Purchasing Director  

E-Print Network [OSTI]

To: Officers, Deans, Department Heads, and Department Administrators From: Diane Devlin, Purchasing BY THE PURCHASING OFFICE NO LATER THAN FRIDAY, MAY 16, 2014. Certain commodity items may require longer lead times for such items should be received by the purchasing office no later than MONDAY, MAY 5, 2014. ITEMS OR SERVICES

Dennett, Daniel

Note: This page contains sample records for the topic "flow improvements purchasing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

P:\\Policy & Procedures\\OSUA\\OSUA #2-purchasing.doc Office of Space Utilization & Analysis  

E-Print Network [OSTI]

P:\\Policy & Procedures\\OSUA\\OSUA #2-purchasing.doc Office of Space Utilization & Analysis Policy & Procedure #2 TITLE: PURCHASING OF COMPUTERS, COMPUTER EQUIPMENT OR SOFTWARE FOR DEPARTMENTAL USE. OBJECTIVE AND PURPOSE: To establish a standard procedure for purchasing computers and computer related equipment

Fernandez, Eduardo

162

Section: Purchasing Revised Date: 01/28/2011 Procedure: 3.3.8  

E-Print Network [OSTI]

Milwaukee Contracts established by the Purchasing Office. C. UW System Contracts are established by UW System Office of Procurement. D. UW Madison Contracts are established by UW Madison Purchasing ServicesSection: Purchasing Revised Date: 01/28/2011 Procedure: 3.3.8 Contract Listing I. Contracts

Saldin, Dilano

163

TULSA JEANS "SPIRIT" PASS Support the Campus Campaign by purchasing a  

E-Print Network [OSTI]

TULSA JEANS "SPIRIT" PASS Support the Campus Campaign by purchasing a "Spirit" Pass and receive purchasing a spirit pass. Yes! I want to be ALL IN and purchase a Jeans "Spirit" Pass in support of Campus_________________________________________________________ Campus Add/Bldg___________________________________________________ Office Phone Number

Oklahoma, University of

164

Optimal purchasing of raw materials: A data-driven approach  

SciTech Connect (OSTI)

An approach to the optimal purchasing of raw materials that will achieve a desired product quality at a minimum cost is presented. A PLS (Partial Least Squares) approach to formulation modeling is used to combine databases on raw material properties and on past process operations and to relate these to final product quality. These PLS latent variable models are then used in a sequential quadratic programming (SQP) or mixed integer nonlinear programming (MINLP) optimization to select those raw-materials, among all those available on the market, the ratios in which to combine them and the process conditions under which they should be processed. The approach is illustrated for the optimal purchasing of metallurgical coals for coke making in the steel industry.

Muteki, K.; MacGregor, J.F. [McMaster University, Hamilton, ON (Canada). Dept. of Chemical Engineering

2008-06-15T23:59:59.000Z

165

EECBG Direct Equipment Purchase Air Conditioner Guide Equipment Type  

E-Print Network [OSTI]

EECBG Direct Equipment Purchase Air Conditioner Guide Equipment Type Size Category (Btu/h) Size.ahridirectory.org/ceedirectory/pages/ac/cee/defaultSearch.aspx 12,000 Btu/h = 1 ton Less than 65,000 Btu/h Air Conditioners, Air Cooled Air Conditioners, Water completed by the California Energy Commission at a rate of 12,000 Btu/h per ton of air conditioning Source

166

Improving the Sensitivity of Mass Spectrometry by Using a New Sheath Flow Electrospray Emitter Array at Subambient Pressures  

SciTech Connect (OSTI)

Arrays of chemically etched emitters with individualized sheath gas capillaries have been developed to enhance electrospray ionization (ESI) at subambient pressures. By including an emitter array in a subambient pressure ionization with nanoelectrospray (SPIN) source, ionization and transmission efficiency can be maximized allowing for increased sensitivity in mass spectrometric analyses. The SPIN source eliminates the major ion losses at conventional ESI-mass spectrometry (MS) interface by placing the emitter in the first vacuum region of the instrument. To facilitate stable electrospray currents in such conditions we have developed an improved emitter array with individualized sheath gas around each emitter. The utility of the new emitter arrays for generating stable multi-electrosprays at subambient pressures was probed by coupling the emitter array/SPIN source with a time of flight (TOF) mass spectrometer. The instrument sensitivity was compared between single emitter/SPIN-MS and multi-emitter/SPIN-MS configurations using an equimolar solution of 9 peptides. An increase in sensitivity correlative to the number of emitters in the array was observed.

Cox, Jonathan T.; Marginean, Ioan; Kelly, Ryan T.; Smith, Richard D.; Tang, Keqi

2014-12-01T23:59:59.000Z

167

Extending purchasing with document management, workflow and the internet  

SciTech Connect (OSTI)

Sandia is a national security laboratory operated for the U.S. department of Energy by the Sandia Corporation, a Lockheed Martin Company. Sandia designs all non-nuclear components for the nation's nuclear weapons, performs a wide variety of energy research and development projects, and works on assignments that respond to national security threats - both military and economic. They encourage and seek partnerships with appropriate U.S. industry and government groups to collaborate on emerging technologies that support their mission. Today, Sandia has two primary facilities, one in Albuquerque, New Mexico, and one in Livermore, California. They employ about 7,600 people and manage about $1.4 billion of work per year. In 1995, a decision was made to move from their in-house developed systems to commercial software. This decision was driven partly by Y2K compliance issues associated with the existing operating system and support environment. Peoplesoft was selected for human resources and Oracle for manufacturing and financial. They implemented Peoplesoft for human resources (HR) in 1997. They then implemented 7 Oracle modules in manufacturing in October 1998, including WIP, BOM, engineering, quality, inventory, MRP, cost management and limited HR/purchasing/receiving functionality required to support manufacturing. In March of 1999, they brought a portion of their Projects module up to allow for input of project/task information by their line customers and on October 1, 1999, they went live with the fill-blown financial package. They implemented projects, GL, receivables, payables, purchasing, assets and incorporated manufacturing modules and HR. This paper will discuss the analysis and implementation of the purchasing module.

SIMPSON,SUZANNE L.; PERICH,JULIE K.

2000-02-09T23:59:59.000Z

168

Power Purchase Agreement Checklist for State and Local Governments  

SciTech Connect (OSTI)

This fact sheet provides information and guidance on the solar photovoltaic (PV) power purchase agreement (PPA), which is a financing mechanism that state and local government entities can use to acquire clean, renewable energy. It addressed the financial, logistical, and legal questions relevant to implementing a PPA, but we do not examine the technical details?those can be discussed later with the developer/contractor. This fact sheet is written to support decision makers in U.S. state and local governments who are aware of solar PPAs and may have a cursory knowledge of their structure but they still require further information before committing to a particular project.

Cory, K.; Canavan, B.; Koenig, R.

2009-10-01T23:59:59.000Z

169

WAPA Purchase of Energy Contractor Template | Department of Energy  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGYWomen Owned SmallOf The 2012Nuclear GuideReportVictor KaneContractfromPurchase of

170

Contractor Purchasing Balanced Scorecard for FY 2010 | Department of Energy  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power Systems EngineeringDepartmentSmart GridThird Quarter Overall ContractPurchasing Balanced

171

Energy efficiency choice in the purchase of residential appliances  

SciTech Connect (OSTI)

This paper provides a quantitative analysis of the behavior of the market for the purchase of energy efficiency in residential appliances and heating and cooling equipment. We examine the historical efficiency choices over the period 1972 to 1980 for eight consumer products: gas central space heaters, oil central space heaters, room air conditioners, central air conditioners, electric water heaters, gas water heaters, refrigerators, and freezers. We characterize the behavior of the market for these products by an aggregate market discount rate. Except for air conditioners, the observed discount rates are much higher than real interest rates or the discount rates commonly used in life-cycle cost analysis of consumer choice. They appear to be relatively constant, even though fuel prices escalated rapidly over the time period. We conclude from these results that the market for energy efficiency is not performing well. Several explanations of the under investment in efficiency are proposed: (1) lack of information about the costs and benefits of energy efficiency; (2) prevalence of third party purchasers; (3) unavailability of highly efficient equipment without other features; (4) long manufacturing lead times; and (5) other marketing strategies.

Ruderman, H.; Levine, M.D.; McMahon, J.E.

1984-07-01T23:59:59.000Z

172

PASSIVE CONTROL OF PARTICLE DISPERSION IN A PARTICLE-LADEN CIRCULAR JET USING ELLIPTIC CO-ANNULAR FLOW: A MEANS FOR IMPROVING UTILIZATION AND EMISSION REDUCTIONS IN PULVERIZED COAL BURNER  

SciTech Connect (OSTI)

A passive control technology utilizing elliptic co-flow to control the particle flinging and particle dispersion in a particle (coal)-laden flow was investigated using experimental and numerical techniques. Preferential concentration of particles occurs in particle-laden jets used in pulverized coal burner and causes uncontrollable NO{sub x} formation due to inhomogeneous local stoichiometry. This particular project was aimed at characterizing the near-field flow behavior of elliptic coaxial jets. The knowledge gained from the project will serve as the basis of further investigation on fluid-particle interactions in an asymmetric coaxial jet flow-field and thus is important to improve the design of pulverized coal burners where non-homogeneity of particle concentration causes increased NO{sub x} formation.

Ahsan R. Choudhuri

2003-06-01T23:59:59.000Z

173

The Effects of Price Discrimination on Buyer‚s Internal Reference Price and Post-purchase Emotions.  

E-Print Network [OSTI]

??This article examines whether price discrimination affects consumer price perceptions and emotions. Questionnaires involving various purchasing scenarios indicate that all kinds of price discrimination decreaseÖ (more)

Huang, Siang-hua

2007-01-01T23:59:59.000Z

174

Table 23. Domestic Crude Oil First Purchase Prices by API Gravity  

U.S. Energy Information Administration (EIA) Indexed Site

17.18 17.64 Source: Energy Information Administration, Form EIA-182, "Domestic Crude Oil First Purchase Report." Energy Information AdministrationPetroleum Marketing Annual...

175

Table 23. Domestic Crude Oil First Purchase Prices by API Gravity  

U.S. Energy Information Administration (EIA) Indexed Site

data reported. Source: Energy Information Administration, Form EIA-182, "Domestic Crude Oil First Purchase Report." Energy Information Administration Petroleum Marketing Annual...

176

Table 23. Domestic Crude Oil First Purchase Prices by API Gravity  

U.S. Energy Information Administration (EIA) Indexed Site

12.17 12.80 Source: Energy Information Administration, Form EIA-182, "Domestic Crude Oil First Purchase Report." Energy Information AdministrationPetroleum Marketing Annual...

177

Small Wind Guidebook/Things to Consider When Purchasing a Small...  

Open Energy Info (EERE)

GuidebookThings to Consider When Purchasing a Small Wind Turbine < Small Wind Guidebook Jump to: navigation, search Print PDF WIND ENERGY STAKEHOLDER ENGAGEMENT & OUTREACHSmall...

178

Low Standby Power, Purchasing Specifications For Energy-Efficient Products (Fact Sheet)  

SciTech Connect (OSTI)

Purchasing specification prepared by the U.S. Department of Energy (DOE) Federal Energy Management Program (FEMP) for Low Standby Power products within the FEMP Designated Product program.

Not Available

2010-08-01T23:59:59.000Z

179

THE SOLARIZE GUIDEBOOK: A community guide to collective purchasing of residential PV systems  

E-Print Network [OSTI]

THE SOLARIZE GUIDEBOOK: A community guide to collective purchasing of residential PV systems #12 and Sustainability partnered with neighborhood coalition offices,

180

Developing a gas purchasing strategy using a linear model  

SciTech Connect (OSTI)

This paper outlines the process of developing a gas purchasing strategy with the use of a linear programming model. The linear model is used to determine the least cost approach regarding the acquisition of natural gas which has a considerable impact on the company`s financial performance. The author discusses the importance of optimizing gas costs from an end-user`s perspective. The Midland Cogeneration Venture (MCV) is the country`s largest cogeneration facility. The Facility has been certified by FERC (Federal Energy Regulatory Commission) as a Q.F. (Qualifying Facility) under PURPA (Public Utility Regulatory Policies Act of 1978). Unlike utilities, who have the ability to pass costs through to customers, MCV`s revenues are based on long-term contracts with its utility and industrial customers. Therefore, MCV cannot pass costs through to its customers. As such, effectively managing costs is vital to the success of the company.

Alst, K.M. Van [Midland Cogeneration Venture Limited Partnership, Midland, MI (United States)

1995-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "flow improvements purchasing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Improving parameter estimation and water table depth simulation in a land surface model using GRACE water storage and estimated base flow data  

E-Print Network [OSTI]

40, doi:10.1175/2008JHM993.1. Szilagyi, J. (2004), Heuristicsimulations of base flow [Szilagyi, 2004]. Although the

Lo, Min-Hui; Famiglietti, James S; Yeh, P. J.-F.; Syed, T. H

2010-01-01T23:59:59.000Z

182

Improved solid aerosol generator  

DOE Patents [OSTI]

An improved solid aerosol generator used to produce a gas borne stream of dry, solid particles of predetermined size and concentration. The improved solid aerosol generator nebulizes a feed solution of known concentration with a flow of preheated gas and dries the resultant wet heated aerosol in a grounded, conical heating chamber, achieving high recovery and flow rates. 2 figs.

Prescott, D.S.; Schober, R.K.; Beller, J.

1988-07-19T23:59:59.000Z

183

SUPPLEMENTARY METHODS AND FIGURES Enzymes: Asp-N endoproteinase was purchased from Roche Applied Science (Mannheim,  

E-Print Network [OSTI]

spectrometry-grade trypsin by Promega (Madison, WI). Phusion high-fidelity polymerase was purchased from New). OPTI-FLUOR scintillation liquid was obtained from PerkinElmer (Shelton, CT). Alumina was purchased from, Sweden). The scintillation counter model LS 6500 was furnished by Beckman Coulter (Fullerton, CA

Palczewski, Krzysztof

184

Bowling Green State University University Policy on Purchasing, Sales and Disposal of  

E-Print Network [OSTI]

Bowling Green State University University Policy on Purchasing, Sales and Disposal of University and Administration, or his/her designee. #12;Bowling Green State University University Policy on Purchasing, Sales contracts, Inter-University Council contracts, Bowling Green State University contracts or other

Moore, Paul A.

185

On-Site Renewable Power Purchase Agreements for Renewable Energy Projects  

Broader source: Energy.gov [DOE]

An on-site renewable power purchase agreement (PPA) enables Federal agencies to fund a renewable energy project by contracting to purchase the power generated by the system. The renewable energy equipment is installed and owned by a developer but located on-site at the agency facility.

186

Project Recap Lack of a lean system within the purchasing department of Saint-Gobain's PPL  

E-Print Network [OSTI]

Project Recap Lack of a lean system within the purchasing department of Saint-Gobain's PPL getting/examining QAD system reports and cross-department communication. The objective of this project the purchasing department. PSU Consultants have focused on Saint-Gobain's QAD system and communication procedures

Demirel, Melik C.

187

SAMPLE GENERAL TERMS WHEN PURCHASING SERVICES* ACTUAL TERMS REQUIRED WILL BE DETERMINED BY CONTRACTS &  

E-Print Network [OSTI]

1 SAMPLE GENERAL TERMS WHEN PURCHASING SERVICES* ACTUAL TERMS REQUIRED WILL BE DETERMINED Contracts and Procurement (x4532) if you have questions regarding purchasing services. 1. Independent Status in an independent capacity and not as officers or employees or agents of the State of California. While Contractor

de Lijser, Peter

188

Staples has everything your campus needs. The Syracuse University Purchasing Office has awarded Staples Advantage  

E-Print Network [OSTI]

Staples has everything your campus needs. The Syracuse University Purchasing Office has awarded to our efforts toward carbon footprint reduction on campus ¬∑ Direct support through the Purchasing Office Staples Advantage¬ģ Preferred Vendor Status for Office Products. With office supply discounts averaging

McConnell, Terry

189

Sustainable Seafood Purchasing at the University of British Columbia What's the catch?  

E-Print Network [OSTI]

Sustainable Seafood Purchasing at the University of British Columbia ­ What's the catch? An evaluation of the sustainability of current seafood purchasing practices at UBC Anna Magera SEEDS Directed THE SUSTAINABLE SEAFOOD MOVEMENT ­ A BRIEF HISTORY 3 Sustainable Seafood ­ What is it? 3 Main Concerns

190

APPROVAL PROCESS FOR IT PURCHASES To decrease University costs, an April 19, 2013 memo from the Office of the President  

E-Print Network [OSTI]

purchase agreements. The president charged the Office of the University CIO with responsibility. As a result, the Office of the University CIO inserted new steps into the IT purchase approval processAPPROVAL PROCESS FOR IT PURCHASES To decrease University costs, an April 19, 2013 memo from

191

The inspection of power purchase contracts at the Western Area Power Administration  

SciTech Connect (OSTI)

The Office of Inspector General received an allegation regarding possible irregularities in certain power purchase contracts awarded by the Western Area Power Administration (WAPA). Based on our survey of WAPA`s power purchase procedures, we expanded our allegation based inquiry to include several management issues. Thus, the purpose of this inspection was to review the specific allegation as well as to evaluate WAPA`s power purchase contracting procedures relating to competition, the documentation of the solicitation, negotiation, and award processes, and the determination of the reasonableness of the rates negotiated by WAPA.

NONE

1995-05-01T23:59:59.000Z

192

E-Print Network 3.0 - air force purchasing Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

air pollution. BENEFITS TO CONSUMERS San Diego... the 8,000-10,000 that installing solar on existing homes costs in part because homebuilders purchase... 's Buydown and the...

193

Brandeis University Authorization for Payroll Deduction Purchase of MBTA Commuter Pass  

E-Print Network [OSTI]

Brandeis University Authorization for Payroll Deduction Purchase of MBTA Commuter Pass New Rates of the monthly MBTA pass indicated above from my paycheck on a post tax basis. I understand that Brandeis

Fraden, Seth

194

Third Party Financing and Power Purchasing Agreements for Public Sector PV Projects  

Broader source: Energy.gov [DOE]

Provides information on third-party financing and Power Purchase Agreements for public sector PV projects presented at the TAP Web Seminar on May 27, 2009, includes economic and legal information.

195

El Paso Electric Company- Small and Medium System Renewable Energy Certificate Purchase Program  

Broader source: Energy.gov [DOE]

Effective January 1, 2010, El Paso Electric is purchasing renewable energy certificates (RECs) from its New Mexico customers who install small photovoltaic (PV) systems and wind systems up to 10...

196

Effects of purchase and presentation order on the valuation of physical and digital good bundles  

E-Print Network [OSTI]

Many digital goods also come on physical mediums, such as movies and games on discs. We investigate how the order of purchase (buying a digital copy of a good already owned in physical form or vice versa) and order of ...

Duan, Tianzhou

2014-01-01T23:59:59.000Z

197

Improved aethalometer  

DOE Patents [OSTI]

An improved aethalometer having a single light source and a single light detector and two light paths from the light source to the light detector. A quartz fiber filter is inserted in the device, the filter having a collection area in one light path and a reference area in the other light path. A gas flow path through the aethalometer housing allows ambient air to flow through the collection area of the filter so that aerosol particles can be collected on the filter. A rotating disk with an opening therethrough allows light for the light source to pass alternately through the two light paths. The voltage output of the detector is applied to a VCO and the VCO pulses for light transmission separately through the two light paths, are counted and compared to determine the absorption coefficient of the collected aerosol particles. 5 figs.

Hansen, A.D.

1988-01-25T23:59:59.000Z

198

HS663(b) Pre-purchase form for hazardous materials Version 4: 19/03/2013 Reference HS316: Purchasing Guidelines  

E-Print Network [OSTI]

segregated storage area and if yes, is one available? Is a safe method available to transport the chemical guideline Is the chemical a Schedule 4 or Schedule 8 Drug. Some S4s and all S8s require additional: Purchasing Guidelines This form can be used to assist consider the risks of introducing new hazardous

New South Wales, University of

199

Washington Lease Purchase Case Study | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

to make 1.3 million in facilities improvements that reduced the school district's energy and water usage. Case study is excerpted from Financing Energy Upgrades for K-12...

200

Energy Purchasing/Marketing Strategies- Energy Service Agreement  

E-Print Network [OSTI]

The objective of this program commits both the utility companies and industrial sectors to jointly agree to energy improvement projects and rate adjustments outside the standard scope of existing utility company's standard business formats. It can...

Filak, J. J. Jr.

Note: This page contains sample records for the topic "flow improvements purchasing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Olefin Autoxidation in Flow  

E-Print Network [OSTI]

Handling hazardous multiphase reactions in flow brings not only safety advantages but also significantly improved performance, due to better mass transfer characteristics. In this paper, we present a continuous microreactor ...

Neuenschwander, Ulrich

202

Procurement Office, The University of Edinburgh, Charles Stewart House, 9-16 Chambers Street, Edinburgh, EH1 1HT PURCHASE OF SERVICES  

E-Print Network [OSTI]

& Conditions relating to the purchase of Services. Contract means the agreement constituted by the Supplier

Schnaufer, Achim

203

USING NETWORKS OF JOURNEYS TO IMPROVE A PETROL MARKET MODEL  

E-Print Network [OSTI]

USING NETWORKS OF JOURNEYS TO IMPROVE A PETROL MARKET MODEL Alison Heppenstall1 , Andrew Evans1 that the majority of consumers purchased petrol on their way to work or on shopping trips. A network model at the micro level are not tied to global level variables like oil prices); the parameters are often difficult

Clark, Joanna

204

U.S.U.S. Federal Agency Purchasing ManagersFederal Agency Purchasing Managers Fuel Cell Systems for Portable, Backup and UPSFuel Cell Systems for Portable, Backup and UPS  

E-Print Network [OSTI]

U.S.U.S. Federal Agency Purchasing ManagersFederal Agency Purchasing Managers Fuel Cell Systems, remote, aux. power Buildings & Facilities · 100 Kilowatts to · Primary power, critica Speciality vehicles applications world-wide. Central Oregon business, 68 Employees World class energy technology company focused

205

Cotton flow  

E-Print Network [OSTI]

Using the conformally invariant Cotton tensor, we define a geometric flow, the "Cotton flow", which is exclusive to three dimensions. This flow tends to evolve the initial metrics into conformally flat ones, and is somewhat orthogonal to the Yamabe flow, the latter being a flow within a conformal class. We define an entropy functional, and study the flow of nine homogeneous spaces both numerically and analytically. In particular, we show that the arbitrarily deformed homogeneous 3-sphere flows into the round 3-sphere. Two of the nine homogeneous geometries, which are degenerated by the Ricci flow, are left intact by the Cotton flow.

Ali Ulas Ozgur Kisisel; Ozgur Sarioglu; Bayram Tekin

2008-06-17T23:59:59.000Z

206

In press, Water Resources Research Optimization of Environmental Water Purchases with Uncertainty  

E-Print Network [OSTI]

provide efficient means to move water from those who value it less to those for whom shortage is expensiveIn press, Water Resources Research Optimization of Environmental Water Purchases with Uncertainty of Civil and Environmental Engineering, University of California, Davis ABSTRACT Water managers are turning

Pasternack, Gregory B.

207

U.S. Playground Equipment Manufacturer and Purchaser Perceptions of Treated Wood  

E-Print Network [OSTI]

U.S. Playground Equipment Manufacturer and Purchaser Perceptions of Treated Wood Todd F. Shupe treated wood might cut life short for our children. "EPA chops down potential killer", 24 Hour News 8, Florida, after his bill to ban arsenic-treated wood from Florida's public playgrounds failed to pass

208

STANDARD ADMINISTRATIVE PROCEDURE 07.01.99.M0.01 Purchasing Guidelines  

E-Print Network [OSTI]

STANDARD ADMINISTRATIVE PROCEDURE 07.01.99.M0.01 Purchasing Guidelines Approved July 15, 1997 Revised May 22, 2007 Revised June 2, 2009 Next Scheduled Review: October 31, 2014 Standard Administrative Procedure Statement This Standard Administrative Procedure (SAP) outlines a standard of conduct for all

209

Prediction Indicators for Voluntary Carbon-Offset Purchases Among Trail Runners  

E-Print Network [OSTI]

Prediction Indicators for Voluntary Carbon-Offset Purchases Among Trail Runners M. Nils Peterson Voluntary carbon offsets (VCOs) represent a rapidly growing tool for addressing climate change, but few voluntary carbon offsets (VCOs) to offset emissions from activities they engage in. Prior to the global

Peterson, M. Nils

210

Purchasing & Contracting 742-3844 TTU CONTRACT ROUTING SHEET Contract # FOAP Contract amount $  

E-Print Network [OSTI]

Purchasing & Contracting 742-3844 TTU CONTRACT ROUTING SHEET Contract # FOAP Contract amount. Routing Sheet must be signed by department. Contract (brief description of scope) Board approval required? Yes No Meeting date Board Item # Note, BOR approval is required if contract is greater than $500

Westfall, Peter H.

211

Energy Efficiency Block Grant Approved Funds --Direct Purchase California Energy Commission  

E-Print Network [OSTI]

Energy Efficiency Block Grant Approved Funds -- Direct Purchase California Energy Commission As of May 12, 2010 Date Approved City/County EECBG Award Energy Efficiency Measures 4/7/2010 CITY OF SCOTTS cobrahead fixtures. 4/7/2010 CITY OF GREENFIELD $82,019 Implement energy efficiency projects including

212

The Canadian Plug-in Electric Vehicle Survey (CPEVS 2013): Anticipating Purchase, Use, and Grid Interactions  

E-Print Network [OSTI]

electric vehicles (PHEVs) that can be powered by grid electricity for an initial distance, say 60 km, but are otherwise powered by gasoline until the battery is recharged (e.g. the Chevrolet Volt) and Electric vehiclesThe Canadian Plug-in Electric Vehicle Survey (CPEVS 2013): Anticipating Purchase, Use, and Grid

213

OHS Purchasing Guideline Page 1 of 2 Version: 3.1 05/11/2010  

E-Print Network [OSTI]

Page 2 of 2 Version: 3.1 05/11/2010 3.2 The capacity of suppliers of goods and services to comply with UNSW OHS requirements must be assessed. This may be achieved by obtaining the supplier's OHS Policy the necessary qualifications. Purchasing responsibilities designated to staff must be defined in position

New South Wales, University of

214

General Terms & Conditions -Purchase Order Commercial Items & Services Under $100,000 (September 2014)  

E-Print Network [OSTI]

the U.S. Department of Energy (DOE) or any duly authorized representative thereof. (b) Company means UT-Battelle, LLC, acting under Contract No. DE-AC05-00OR22725 with DOE. (c) Seller means the person or organization that has entered into this Agreement with Company. (d) Agreement means Purchase Order, Subcontract, Price

215

General Terms & Conditions -Purchase Order Commercial Items & Services Under $100,000 (PO September 2012)  

E-Print Network [OSTI]

the U.S. Department of Energy (DOE) or any duly authorized representative thereof. (b) Company means UT-Battelle, LLC, acting under Contract No. DE-AC05-00OR22725 with DOE. (c) Seller means the person or organization that has entered into this Agreement with Company. (d) Agreement means Purchase Order, Subcontract, Price

Pennycook, Steve

216

Inventory and software distribution solutions for midsize businesses Buyer's guide: purchasing criteria  

E-Print Network [OSTI]

Inventory and software distribution solutions for midsize businesses Buyer's guide: purchasing criteria Select inventory and software distribution tools that simplify PC and server management. March 2006 #12;2 Creating an accurate inventory of the hardware and software used throughout your

217

Columbia University Purchasing Terms and Conditions Rev. 10/2012 Page 1 of 3  

E-Print Network [OSTI]

Columbia University Purchasing Terms and Conditions Rev. 10/2012 Page 1 of 3 1. DELIVERABLES. If Vendor fails to comply, Columbia reserves all rights available under law, and specifically, the right in Columbia, Vendor hereby assigns to Columbia ownership of all Deliverables to be provided hereunder

Grishok, Alla

218

IwouldliketosupportTheUCI/ScottBrooksGolfInvitational presented by Irvine BMW by purchasing  

E-Print Network [OSTI]

IwouldliketosupportTheUCI/ScottBrooksGolfInvitational presented by Irvine BMW by purchasing # Exp: Signature: Amount Authorized: presented by 1:00 pm shotgun Oak Creek Golf Club Irvine BMW THE UCI BMW raises much needed funds for student-athlete scholarships at UC Irvine. Participants will indulge

Stanford, Kyle

219

Proposals with computer/laptop and software purchases: In order to use agency funds to pay for computers, software and peripherals,  

E-Print Network [OSTI]

graphics output functions for wave-energy modeling. Funds have been requested to purchase a computer as processing of vector and raster graphics. Funds are requested to purchase Adobe SpeedGrade CS6 to enable

Kurapov, Alexander

220

Shroud leakage flow discouragers  

DOE Patents [OSTI]

A turbine assembly includes a plurality of rotor blades comprising a root portion, an airfoil having a pressure sidewall and a suction sidewall, and a top portion having a cap. An outer shroud is concentrically disposed about said rotor blades, said shroud in combination with said tip portions defining a clearance gap. At least one circumferential shroud leakage discourager is disposed within the shroud. The leakage discourager(s) increase the flow resistance and thus reduce the flow of hot gas flow leakage for a given pressure differential across the clearance gap to improve overall turbine efficiency.

Bailey, Jeremy Clyde (Middle Grove, NY); Bunker, Ronald Scott (Niskayuna, NY)

2002-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "flow improvements purchasing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

DV/Payment Requests, PCARD, IOs and Purchase Orders. The following is required by Fiscal Office in order to process your request and to avoid delay in  

E-Print Network [OSTI]

DV/Payment Requests, PCARD, IOs and Purchase Orders. The following is required by Fiscal Office that is of an "Official Function" nature, or mainly when food items are purchased. This includes business meals, training and recruiting costs. As well, these must be signed and originals sent. 5. There are two types of Purchase orders

222

Electrospray characteristic curves: in pursuit of improved performance...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Electrospray characteristic curves: in pursuit of improved performance in the nano-flow regime. Electrospray characteristic curves: in pursuit of improved performance in the...

223

Using Renewable Energy Purchases to Achieve Institutional Carbon Goals: A Review of Current Practices and Considerations  

SciTech Connect (OSTI)

With organizations and individuals increasingly interested in accounting for their carbon emissions, greater attention is being placed on how to account for the benefits of various carbon mitigation actions available to consumers and businesses. Generally, organizations can address their own carbon emissions through energy efficiency, fuel switching, on-site renewable energy systems, renewable energy purchased from utilities or in the form of renewable energy certificates (RECs), and carbon offsets. This paper explores the role of green power and carbon offsets in carbon footprinting and the distinctions between the two products. It reviews how leading greenhouse gas (GHG) reporting programs treat green power purchases and discusses key issues regarding how to account for the carbon benefits of renewable energy. It also discusses potential double counting if renewable energy generation is used in multiple markets.

Bird, L.; Sumner, J.

2011-01-01T23:59:59.000Z

224

Annual report: Purchasing and Materials Management Organization, Sandia National Laboratories, fiscal year 1992  

SciTech Connect (OSTI)

This report summarizes the purchasing and transportation activities of the Purchasing and Materials Management Organization for Fiscal Year 1992. Activities for both the New Mexico and California locations are included. Topics covered in this report include highlights for fiscal year 1992, personnel, procurements (small business procurements, disadvantaged business procurements, woman-owned business procurements, New Mexico commercial business procurements, Bay area commercial business procurements), commitments by states and foreign countries, and transportation activities. Also listed are the twenty-five commercial contractors receiving the largest dollar commitments, commercial contractors receiving commitments of $1,000 or more, integrated contractor and federal agency commitments of $1,000 or more from Sandia National Laboratories/New Mexico and California, and transportation commitments of $1,000 or more from Sandia National Laboratories/New Mexico and California.

Zaeh, R.A.

1993-04-01T23:59:59.000Z

225

"Table A47. Average Prices of Purchased Electricity, Steam, and Natural Gas"  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ <Information Administration (EIA) 103. Relative Standard Errors for7. Average Prices of Purchased

226

Edmund G. Brown, Jr. IMPROVING ENVIRONMENTAL FLOW  

E-Print Network [OSTI]

Center for Watershed Sciences Davis, California 95616 Peter B. Moyle, Principal Investigator (UC Davis) Joseph D. Kiernan (UC Davis) John G. Williams Commission Contract No. 500-02-004 Prepared For: Public of California, Davis. The information from this project contributes to PIER's EnergyRelated Environmental

227

Applications in MPC and Network Flows  

E-Print Network [OSTI]

This allows for improvement in communication-efficiency. We apply our algorithm to model predictive control (MPC) and to network flow problems and show,†...

2013-05-08T23:59:59.000Z

228

Green Purchasing  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickr Flickr Editor'sshortGeothermalGoGreen Engineering and LifeGreen

229

Regional Purchasing  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared at 278, 298,NIST3 A√áORIANONews Media ¬Ľ 2014 Regional

230

Data sources directory for purchasing officials: Energy-efficient and environmentally preferred products  

SciTech Connect (OSTI)

This Directory, produced by the New York State Energy Research and Development Authority, is an introduction to organizations that provide information about energy-efficient and environmentally preferred equipment and products. It is intended to be a reference tool for purchasing officials in the public and private sectors. The New York State Energy Research and Development Authority does not endorse any particular vendor, organization, or technology. This list was prepared to provide information. The companies listed may provide additional products and/or services not mentioned in this directory.

NONE

1995-09-01T23:59:59.000Z

231

Table A27. Quantity of Purchased Electricity, Steam, and Natural Gas by Type  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative FuelsTotal" (Percent) Type: Sulfur Content API Gravity Period: Monthly Annual Download Series History71.7 588.5 56,673.61Quantity of Purchased

232

Flow chamber  

DOE Patents [OSTI]

A flow chamber having a vacuum chamber and a specimen chamber. The specimen chamber may have an opening through which a fluid may be introduced and an opening through which the fluid may exit. The vacuum chamber may have an opening through which contents of the vacuum chamber may be evacuated. A portion of the flow chamber may be flexible, and a vacuum may be used to hold the components of the flow chamber together.

Morozov, Victor (Manassas, VA)

2011-01-18T23:59:59.000Z

233

Geological flows  

E-Print Network [OSTI]

In this paper geology and planetology are considered using new conceptual basis of high-speed flow dynamics. Recent photo technics allow to see all details of a flow, 'cause the flow is static during very short time interval. On the other hand, maps and images of many planets are accessible. Identity of geological flows and high-speed gas dynamics is demonstrated. There is another time scale, and no more. All results, as far as the concept, are new and belong to the author. No formulae, pictures only.

Yu. N. Bratkov

2008-11-19T23:59:59.000Z

234

Financial impacts of nonutility power purchases on investor-owned electric utilities  

SciTech Connect (OSTI)

To assist in its these responsibilities in the area of electric power, EIA has prepared this report, Financial Impacts of Nonutility Power Purchases on Investor-Owned Electric Utilities. The primary purpose of this report is to provide an overview of the issues surrounding the financial impacts of nonutility generation contracts (since the passage of the Public Utility Regulatory Policies Act of 1978) on investor-owned utilities. The existing concern in this area is manifest in the provisions of Section 712 of the Energy Policy Act of 1992, which required State regulatory commissions to evaluate various aspects of long-term power purchase contracts, including their impact on investor-owned utilities` cost of capital and rates charged to customers. The EIA does not take positions on policy questions. The EIA`s responsibility is to provide timely, high quality information and to perform objective, credible analyses in support of the deliberations by both public and private decision-makers. Accordingly, this report does not purport to represent the policy positions of the US Department of Energy or the Administration.

Not Available

1994-06-01T23:59:59.000Z

235

Proposal for the Purchase, Without a Call for Tenders, of a Medium-Temperature Hot Water Boiler for the 300 GeV Accelerator  

E-Print Network [OSTI]

Proposal for the Purchase, Without a Call for Tenders, of a Medium-Temperature Hot Water Boiler for the 300 GeV Accelerator

1976-01-01T23:59:59.000Z

236

Proposal for the award of a blanket purchase contract, without competitive tendering, for the supply of pressurised ionisation chambers for radiation monitoring  

E-Print Network [OSTI]

Proposal for the award of a blanket purchase contract, without competitive tendering, for the supply of pressurised ionisation chambers for radiation monitoring

2013-01-01T23:59:59.000Z

237

Proposal to negotiate an amendment to a blanket purchase contract for the supply and installation of water-cooled bus bars and cables for the LHC  

E-Print Network [OSTI]

Proposal to negotiate an amendment to a blanket purchase contract for the supply and installation of water-cooled bus bars and cables for the LHC

2014-01-01T23:59:59.000Z

238

Proposal for the award of a blanket purchase contract for the replacement and maintenance of lifts giving access to the LHC underground areas  

E-Print Network [OSTI]

Proposal for the award of a blanket purchase contract for the replacement and maintenance of lifts giving access to the LHC underground areas

2015-01-01T23:59:59.000Z

239

Cooling Flows or Heating Flows?  

E-Print Network [OSTI]

It is now clear that AGN heat cooling flows, largely by driving winds. The winds may contain a relativistic component that generates powerful synchrotron radiation, but it is not clear that all winds do so. The spatial and temporal stability of the AGN/cooling flow interaction are discussed. Collimation of the winds probably provides spatial stability. Temporal stability may be possible only for black holes with masses above a critical value. Both the failure of cooling flows to have adiabatic cores and the existence of X-ray cavities confirm the importance of collimated outflows. I quantify the scale of the convective flow that the AGN Hydra would need to drive if it balanced radiative inward flow by outward flow parallel to the jets. At least in Virgo any such flow must be confined to r<~20 kpc. Hydrodynamical simulations suggest that AGN outbursts cannot last longer than ~25 Myr. Data for four clusters with well studied X-ray cavities suggests that heating associated with cavity formation approximately balances radiative cooling. The role of cosmic infall and the mechanism of filament formation are briefly touched on.

James Binney

2003-10-08T23:59:59.000Z

240

Procurement Office, The University of Edinburgh, Charles Stewart House, 9-16 Chambers Street, Edinburgh, EH1 1HT PURCHASE OF EQUIPMENT  

E-Print Network [OSTI]

Procurement Office, The University of Edinburgh, Charles Stewart House, 9-16 Chambers Street, Edinburgh, EH1 1HT PURCHASE OF EQUIPMENT 1. STANDARD TERMS & CONDITIONS RELATING TO THE PURCHASE and having its principal administrative offices at Old College, South Bridge, Edinburgh, EH8 9YL (the

Schnaufer, Achim

Note: This page contains sample records for the topic "flow improvements purchasing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

AE Work Team Short Roster Strategic Purchasing-Office Supplies v 1.1 2012-01-06 dgk Project Member Team Role UW-Madison Role  

E-Print Network [OSTI]

AE Work Team Short Roster Strategic Purchasing- Office Supplies v 1.1 2012-01-06 dgk Project Member II Work Team Roster: Strategic Purchasing - Office Supplies #12; Team Role UW-Madison Role Tammy Starr Team Leader Office of Human Resources (OHR) Mike Marean Team

Sheridan, Jennifer

242

Office of Purchasing 213 Thomas Boyd Hall -Baton Rouge -Louisiana -70803-3001 -225/578-2176 -FAX 225/578-2292  

E-Print Network [OSTI]

Office of Purchasing 213 Thomas Boyd Hall - Baton Rouge - Louisiana - 70803-3001 - 225 the Purchasing Office; payments will be made through the Office of Accounting Services. Attached is a certificate stands behind our transactions. Our chief business officer is Dr. Jerry J. Baudin, Vice Chancellor

Harms, Kyle E.

243

Procurement Office, The University of Edinburgh, Charles Stewart House, 9-16 Chambers Street, Edinburgh, EH1 1HT PURCHASE OF IT EQUIPMENT  

E-Print Network [OSTI]

Procurement Office, The University of Edinburgh, Charles Stewart House, 9-16 Chambers Street, Edinburgh, EH1 1HT PURCHASE OF IT EQUIPMENT 1. STANDARD TERMS AND CONDITIONS RELATING TO THE PURCHASE and having its principal administrative offices at Old College, South Bridge, Edinburgh, EH8 9YL (the

Schnaufer, Achim

244

Procurement Office, The University of Edinburgh, Charles Stewart House, 9-16 Chambers Street, Edinburgh, EH1 1HT PURCHASE OF GOODS  

E-Print Network [OSTI]

Procurement Office, The University of Edinburgh, Charles Stewart House, 9-16 Chambers Street, Edinburgh, EH1 1HT PURCHASE OF GOODS 1. STANDARD TERMS AND CONDITIONS RELATING TO THE PURCHASE OF GOODS its principal administrative offices at Old College, South Bridge, Edinburgh, EH8 9YL (the "University

Schnaufer, Achim

245

Disclosure Form Employee-Vendor Relationship Vendor may not provide goods or services unless approved by Purchasing Department  

E-Print Network [OSTI]

Disclosure Form ­ Employee-Vendor Relationship Vendor may not provide goods or services unless approved by Purchasing Department Instructions: Complete this form to disclose an Employee-Vendor Person: Phone: Fax: Email: PROPOSED OR EXISTING VENDOR DETAILS Name and address of Vendor: IFIS Vendor

Tsien, Roger Y.

246

Cleaning Glass Slides and Coverslips The following carriers can be purchased from the Fluoroware division of Entegris  

E-Print Network [OSTI]

Cleaning Glass Slides and Coverslips Materials The following carriers can be purchased from coverslips. - Handle for LCD Carrier (Polypropylene) / Catalog # A45-03-0603 For 3" glass slides. - Carrier slides and coverslips in the appropriate sized carriers. Fill the Ultrasonic Cleaner with pure water

Fygenson, Deborah Kuchnir

247

Recovery Act: Hydroelectric Facility Improvement Project - Replacement of Current Mechanical Seal System with Rope Packing System  

SciTech Connect (OSTI)

On January 27, 2010 the City of North Little Rock, Arkansas received notification of the awarding of a Department of Energy (DOE) grant totaling $450,000 in funding from the American Recovery and Reinvestment Act (ARRA) under the Project Title: Recovery Act: Hydroelectric Facility Improvement Project Ė Automated Intake Clearing Equipment and Materials Management. The purpose of the grant was for improvements to be made at the Cityís hydroelectric generating facility located on the Arkansas River. Improvements were to be made through the installation of an intake maintenance device (IMD) and the purchase of a large capacity wood grinder. The wood grinder was purchased in order to receive the tree limbs, tree trunks, and other organic debris that collects at the intake of the plant during high flow. The wood grinder eliminates the periodic burning of the waste material that is cleared from the intake and reduces any additional air pollution to the area. The resulting organic mulch has been made available to the public at no charge. Design discussion and planning began immediately and the wood grinder was purchased in July of 2010 and immediately put to work mulching debris that was gathered regularly from the intake of the facility. The mulch is currently available to the public for free. A large majority of the design process was spent in discussion with the Corps of Engineers to obtain approval for drawings, documents, and permits that were required in order to make changes to the structure of the powerhouse. In April of 2011, the Cityís Project Engineer, who had overseen the application, resigned and left the Cityís employ. A new Systems Mechanical Engineer was hired and tasked with overseeing the project. The transfer of responsibility led to a re-examination of the original assumptions and research upon which the grant proposal was based. At that point, the project went under review and a trip was booked for July 2011 to visit facilities that currently had an IMD installed. This further study of facilities revealed that the implementation of the project as originally described, while proving the benefits described in the original grant application, would likely intensify sand intake. Increased sand intake would lead to an increase in required shutdowns for maintenance and more rapid depreciation of key equipment which would result in a loss of generation capacity. A better solution to the problem, one that continued to meet the criteria for the original grant and ARRA standards, was developed. A supporting day trip was planned to visit other facilities located on the Arkansas River to determine how they were coping with the same strong amounts of sand, silt, and debris. Upon returning from the trip to other Arkansas River facilities it was extremely clear what direction to go in order to most efficiently address the issue of generator capacity and efficiency. Of the plants visited on the Arkansas River, every one of them was running what is called a rope packing shaft sealing system as opposed to mechanical shaft seals, which the facility was running. Rope packing is a time proven sealing method that has been around for centuries. It has proved to perform very well in dirty water situations just like that of the Arkansas River. In April of 2012 a scope change proposal was submitted to the DOE for approval. In August of 2012 the City received word that the change of scope had been approved. Plans were immediately set in motion to begin the conversion from mechanical seals to a packing box at the facility. Contractors arrived on October 1st, 2012 and the project team began unwatering the unit for disassembly. The seal conversion was completed on February 29th, 2013 with start-up of the unit. Further testing and adjusting was done throughout the first two weeks of March.

Stephens, Jessica D.

2013-05-29T23:59:59.000Z

248

Flow cytometer  

DOE Patents [OSTI]

A Faraday cage is described which encloses the flow chamber of a cytometer. Ground planes associated with each field deflection plate inhibit electric fields from varying the charge on designated events/droplets and further concentrates. They also increase forces applied to a passing charged event for accurate focus while concomitantly inhibiting a potential shock hazard. 4 figs.

Van den Engh, G.

1995-11-07T23:59:59.000Z

249

Imaging, Characterizing, and Modeling of Fracture Networks and Fluid Flow in EGS Reservoirs  

Broader source: Energy.gov [DOE]

Project objectives: Improve image resolution for microseismicimaging and time-lapse active seismic imaging; Enhance the prediction of fluid flow and temperature distributions and stress changes by coupling fracture flow simulations with reservoir flow simulations; and integrating imaging into modeling.

250

Commissioning Measurements and Experience Obtained from the Installation of a Fissile Mass Flow monitor in the URAL Electrochemical Integrated Plant (UEIP) in Novouralsk  

SciTech Connect (OSTI)

The Blend Down Monitoring System (BDMS) equipment sent earlier to the Ural Electrochemical Integrated Plant (UEIP) at Novouralsk, Russia, was installed and implemented successfully on February 2, 1999. The BDMS installation supports the highly enriched uranium (HEU) Transparency Implementation Program for material subject to monitoring under the HEU purchase agreement between the United States of America (USA) and the Russian Federation (RF). The BDMS consists of the Oak Ridge National Laboratory (ORNL) Fissile (uranium-235) Mass Flow Monitor (FMFM) and the Los Alamos National Laboratory (LANL) Enrichment Monitor (EM). Two BDMS?s for monitoring the Main and Reserve HEU blending process lines were installed at UEIP. Independent operation of the FMFM Main and FMFM Reserve was successfully demonstrated for monitoring the fissile mass flow as well as the traceability of HEU to the product low enriched uranium. The FMFM systems failed when both systems were activated during the calibration phase due to a synchronization problem between the systems. This operational failure was caused by the presence of strong electromagnetic interference (EMI) in the blend point. The source-modulator shutter motion of the two FMFM systems was not being properly synchronized because of EMI producing a spurious signal on the synchronization cable connecting the two FMFM cabinets. The signature of this failure was successfully reproduced at ORNL after the visit. This unexpected problem was eliminated by a hardware modification and software improvements during a recent visit (June 9-11, 1999) to UEIP, and both systems are now operating as expected.

March-Leuba, J.; Mastal, E.; Powell, D.; Sumner, J.; Uckan, T.; Vines, V.

1999-07-25T23:59:59.000Z

251

Improved cycling cryopump  

DOE Patents [OSTI]

The present invention is designed to achieve continuous high efficiency cryopumping of a vacuum vessel by improving upon and combining in a novel way the cryopumping in a novel way the cryopumping methods. The invention consists of a continuous operation cryopump, with movable louvres, with a high efficiency pumping apparatus. The pumping apparatus includes three cryogenic tubes. They are constructed of a substance of high thermal conductivity, such as aluminum and their exterior surfaces are cryogenic condensing surfaces. Through their interior liquid or gaseous helium from two reservoirs can be made to flow, alternately promoting extreme cooling or allowing some warming.

Batzer, T.H.; Call, W.R.

1984-12-04T23:59:59.000Z

252

Flow through electrode with automated calibration  

DOE Patents [OSTI]

The present invention is an improved automated flow through electrode liquid monitoring system. The automated system has a sample inlet to a sample pump, a sample outlet from the sample pump to at least one flow through electrode with a waste port. At least one computer controls the sample pump and records data from the at least one flow through electrode for a liquid sample. The improvement relies upon (a) at least one source of a calibration sample connected to (b) an injection valve connected to said sample outlet and connected to said source, said injection valve further connected to said at least one flow through electrode, wherein said injection valve is controlled by said computer to select between said liquid sample or said calibration sample. Advantages include improved accuracy because of more frequent calibrations, no additional labor for calibration, no need to remove the flow through electrode(s), and minimal interruption of sampling.

Szecsody, James E [Richland, WA; Williams, Mark D [Richland, WA; Vermeul, Vince R [Richland, WA

2002-08-20T23:59:59.000Z

253

Multiphase flow in fractured porous media  

SciTech Connect (OSTI)

The major goal of this research project was to improve the understanding of the gas-oil two-phase flow in fractured porous media. In addition, miscible displacement was studied to evaluate its promise for enhanced recovery.

Firoozabadi, A.

1995-02-01T23:59:59.000Z

254

SFTEL: Flow Cell | EMSL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Flow Cell EMSL's Subsurface Flow and Transport Experimental Laboratory offers several meter-scale flow cells and columns for research in saturated and unsaturated porous media....

255

Development of a Web-based Emissions Reduction Calculator for Green Power Purchases from Texas Wind Energy Providers  

E-Print Network [OSTI]

DEVELOPMENT OF A WEB-BASED, EMISSIONS REDUCTION CALCULATOR FOR GREEN POWER PURCHASES FROM TEXAS WIND ENERGY PROVIDERS Zi Liu, Ph.D. Research Engineer Jeff S. Haberl, Ph.D., P.E. Professor/Assc. Director Juan... that have been developed to calculate the emissions reductions from electricity provided by wind energy providers in the Texas ERCOT region, including an analysis of actual hourly wind power generated from a wind turbine in Randall County, Texas...

Liu, Z.; Baltazar-Cervantes, J. C.; Gilman, D.; Haberl, J.; Culp, C.

2005-01-01T23:59:59.000Z

256

Fuel purchasing patterns and vehicle use trends from the NPD research gasoline diary data base: data display  

SciTech Connect (OSTI)

The NPD data base has been developed from the Petroleum Marketing Index (PMI) market research survey. The source for PMI is a national diary panel of approximately 4100 households balanced against the U.S. Census according to demography and geographic location. Survey participants maintain diaries in which they record purchases of gasoline and motor oil for each household vehicle. The PMI survey was augmented to include EPA fuel economy numbers for post 1975 model year vehicles. The steps taken to prepare the data for analysis are discussed, including error correction, smoothing, and collapsing to monthly summary records. This preparation yields a manageable data base which includes monthly summary statistics on travel and fuel use. A statistical smoothing of fuel purchase data was used to reduce the uncertainty in fuel economy calculations introduced by the difference between fuel purchased and fuel consumed. Collapsing to monthly summaries also was done to standardize the observations across the data base to uniform time periods. An overview is given of available data on in-use fuel economy, vehicle miles of travel, and fuel demand, highlighting the quarterly trends in these variables. The data presented are divided into three parts: in-use fuel economy, vehicle miles of travel, and fuel demand and fuel prices.

Not Available

1982-09-01T23:59:59.000Z

257

Turbine blade tip flow discouragers  

DOE Patents [OSTI]

A turbine assembly comprises a plurality of rotating blade portions in a spaced relation with a stationery shroud. The rotating blade portions comprise a root section, a tip portion and an airfoil. The tip portion has a pressure side wall and a suction side wall. A number of flow discouragers are disposed on the blade tip portion. In one embodiment, the flow discouragers extend circumferentially from the pressure side wall to the suction side wall so as to be aligned generally parallel to the direction of rotation. In an alternative embodiment, the flow discouragers extend circumferentially from the pressure side wall to the suction side wall so as to be aligned at an angle in the range between about 0.degree. to about 60.degree. with respect to a reference axis aligned generally parallel to the direction of rotation. The flow discouragers increase the flow resistance and thus reduce the flow of hot gas flow leakage for a given pressure differential across the blade tip portion so as to improve overall turbine efficiency.

Bunker, Ronald Scott (Niskayuna, NY)

2000-01-01T23:59:59.000Z

258

CONFORMANCE IMPROVEMENT USING GELS  

SciTech Connect (OSTI)

This report describes work performed during the second year of the project, ''Conformance Improvement Using Gels.'' The project has two objectives. The first objective is to identify gel compositions and conditions that substantially reduce flow through fractures that allow direct channeling between wells, while leaving secondary fractures open so that high fluid injection and production rates can be maintained. The second objective is to optimize treatments in fractured production wells, where the gel must reduce permeability to water much more than that to oil. Pore-level images from X-ray computed microtomography were re-examined for Berea sandstone and porous polyethylene. This analysis suggests that oil penetration through gel-filled pores occurs by a gel-dehydration mechanism, rather than a gel-ripping mechanism. This finding helps to explain why aqueous gels can reduce permeability to water more than to oil. We analyzed a Cr(III)-acetate-HPAM gel treatment in a production well in the Arbuckle formation. The availability of accurate pressure data before, during, and after the treatment was critical for the analysis. After the gel treatment, water productivity was fairly constant at about 20% of the pre-treatment value. However, oil productivity was stimulated by a factor of 18 immediately after the treatment. During the six months after the treatment, oil productivity gradually decreased to approach the pre-treatment value. To explain this behavior, we proposed that the fracture area open to oil flow was increased substantially by the gel treatment, followed by a gradual closing of the fractures during subsequent production. For a conventional Cr(III)-acetate-HPAM gel, the delay between gelant preparation and injection into a fracture impacts the placement, leakoff, and permeability reduction behavior. Formulations placed as partially formed gels showed relatively low pressure gradients during placement, and yet substantially reduced the flow capacity of fractures (with widths from 1 to 4 mm) during brine and oil flow after placement. Regardless of gel age before placement, very little gel washed out from the fractures during brine or oil flow. However, increased brine or oil flow rate and cyclic injection of oil and water significantly decreased the level of permeability reduction. A particular need exists for gels that can plug large apertures (e.g., wide fractures and vugs). Improved mechanical strength and stability were demonstrated (in 1- to 4-mm-wide fractures) for a gel that contained a combination of high- and low-molecular weight polymers. This gel reduced the flow capacity of 2- and 4-mm-wide fractures by 260,000. In a 1-mm-wide fracture, it withstood 26 psi/ft without allowing any brine flow through the fracture. Cr(III)-acetate-HPAM gels exhibited disproportionate permeability reduction in fractures. The effect was most pronounced when the gel was placed as gelant or partially formed gels. The effect occurred to a modest extent with concentrated gels and with gels that were ''fully formed'' when placed. The effect was not evident in tubes. We explored swelling polymers for plugging fractures. Polymer suspensions were quickly prepared and injected. In concept, the partially dissolved polymer would lodge and swell to plug the fracture. For three types of swelling polymers, behavior was promising. However, additional development is needed before their performance will be superior to that of conventional gels.

Randall S. Seright

2003-09-01T23:59:59.000Z

259

Corps Improvement  

E-Print Network [OSTI]

to mitigate environmental impacts of the proj- ect. The Corps? Fort Worth District and the City of Dallas are using an innovative approach to return floodplain value to the Trinity River, while improving flood damage reduction. Big Fossil Creek Watershed... The Big Fossil Watershed Study will address flood damage reduction, while identifying associated water quality, ecosystem restoration and recreational opportunities within the basin. The watershed is located in northern Tarrant County, encompasses 73...

Wythe, Kathy

2007-01-01T23:59:59.000Z

260

Collective economics : leveraging purchasing power of low-income communities for collective gain : Lawrence Community Works and the Network Advantage Program  

E-Print Network [OSTI]

This thesis focuses on the concept of Collective Economics and develops a set of recommendations by which groups with common interests can effectively utilize their purchasing power for collective benefits. Working with ...

Espino, Eric V

2007-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "flow improvements purchasing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Redox Flow Batteries: An Engineering Perspective  

SciTech Connect (OSTI)

Redox flow batteries are well suited to provide modular and scalable energy storage systems for a wide range of energy storage applications. In this paper, we review the development of redox flow battery technology including recent advances in new redox active materials and systems. We discuss cost, performance, and reliability metrics that are critical for deployment of large flow battery systems. The technology, while relatively young, has the potential for significant improvement through reduced materials costs, improved energy and power efficiency, and significant reduction in the overall system cost.

Chalamala, Babu R.; Soundappan, Thiagarajan; Fisher, Graham R.; Anstey, Mitchell A.; Viswanathan, Vilayanur V.; Perry, Mike L.

2014-10-01T23:59:59.000Z

262

Flow visualisation in inclined louvered fins  

SciTech Connect (OSTI)

In this study the flow within an interrupted fin design, the inclined louvered fin, is investigated experimentally through visualisation. The inclined louvered fin is a hybrid of the offset strip fin and standard louvered fin, aimed at improved performance at low Reynolds numbers for compact heat exchangers. The flow behaviour is studied in six geometrically different configurations over a range of Reynolds numbers and quantified using the concept of 'fin angle alignment factor'. The transition from steady laminar to unsteady flow was studied in detail. The fin geometry had a very large impact on the transitional flow behaviour, especially on vortex shedding. (author)

T'Joen, C.; De Paepe, M. [Department of Flow, Heat and Combustion Mechanics, Ghent University-UGent, Sint-Pietersnieuwstraat 41, 9000 Gent (Belgium); Jacobi, A. [Department of Mechanical Science and Engineering, University of Illinois at Urbana-Champaign, 1206 West Green Street, Urbana, IL 61801 (United States)

2009-04-15T23:59:59.000Z

263

Co-flow planar SOFC fuel cell stack  

DOE Patents [OSTI]

A co-flow planar solid oxide fuel cell stack with an integral, internal manifold and a casing/holder to separately seal the cell. This construction improves sealing and gas flow, and provides for easy manifolding of cell stacks. In addition, the stack construction has the potential for an improved durability and operation with an additional increase in cell efficiency. The co-flow arrangement can be effectively utilized in other electrochemical systems requiring gas-proof separation of gases.

Chung, Brandon W.; Pham, Ai Quoc; Glass, Robert S.

2004-11-30T23:59:59.000Z

264

Low volume flow meter  

DOE Patents [OSTI]

The low flow monitor provides a means for determining if a fluid flow meets a minimum threshold level of flow. The low flow monitor operates with a minimum of intrusion by the flow detection device into the flow. The electrical portion of the monitor is externally located with respect to the fluid stream which allows for repairs to the monitor without disrupting the flow. The electronics provide for the adjustment of the threshold level to meet the required conditions. The apparatus can be modified to provide an upper limit to the flow monitor by providing for a parallel electronic circuit which provides for a bracketing of the desired flow rate.

Meixler, Lewis D. (East Windsor, NJ)

1993-01-01T23:59:59.000Z

265

Countercurrent flow absorber and desorber  

DOE Patents [OSTI]

Countercurrent flow absorber and desorber devices are provided for use in absorption cycle refrigeration systems and thermal boosting systems. The devices have increased residence time and surface area resulting in improved heat and mass transfer characteristics. The apparatuses may be incorporated into open cycle thermal boosting systems in which steam serves both as the refrigerant vapor which is supplied to the absorber section and as the supply of heat to drive the desorber section of the system. 9 figs.

Wilkinson, W.H.

1984-10-16T23:59:59.000Z

266

Countercurrent flow absorber and desorber  

DOE Patents [OSTI]

Countercurrent flow absorber and desorber devices are provided for use in absorption cycle refrigeration systems and thermal boosting systems. The devices have increased residence time and surface area resulting in improved heat and mass transfer characteristics. The apparatuses may be incorporated into open cycle thermal boosting systems in which steam serves both as the refrigerant vapor which is supplied to the absorber section and as the supply of heat to drive the desorber section of the system.

Wilkinson, William H. (Columbus, OH)

1984-01-01T23:59:59.000Z

267

MSET modeling of Crystal River-3 venturi flow meters.  

SciTech Connect (OSTI)

The analysis of archived Crystal River-3 feedwater flow data reveals a slow and steady degradation of the flow meter measurements during the 1992/1993 operating cycle. MSET can reliably estimate the true flow rate and quantify the degree of departure between the indicated signal and the true flow rate with high accuracy. The MSET computed flow rate could, in principle, be used to provide an improved estimate of the reactor power and hence avoid the revenue loss associated with derating the reactor based on a faulty feedwater flow rate indication.

Bockhorst, F. K.; Gross, K. C.; Herzog, J. P.; Wegerich, S. W.

1998-01-05T23:59:59.000Z

268

Propeller Flow Meter  

E-Print Network [OSTI]

Propeller flow meters are commonly used to measure water flow rate. They can also be used to estimate irrigation water use. This publication explains how to select, install, read and maintain propeller flow meters....

Enciso, Juan; Santistevan, Dean; Hla, Aung K.

2007-10-01T23:59:59.000Z

269

Dispersed flow film boiling  

E-Print Network [OSTI]

Dispersed flow consists of small liquid droplets entrained in a flowing vapor. This flow regime can occur in cryogenic equipment, in steam generators, and during nuclear reactor loss of coolant accidents. A theoretical ...

Yoder, Graydon L.

1980-01-01T23:59:59.000Z

270

Bacteria in shear flow  

E-Print Network [OSTI]

Bacteria are ubiquitous and play a critical role in many contexts. Their environment is nearly always dynamic due to the prevalence of fluid flow: creeping flow in soil, highly sheared flow in bodily conduits, and turbulent ...

Marcos, Ph.D. Massachusetts Institute of Technology

2011-01-01T23:59:59.000Z

271

CONFORMANCE IMPROVEMENT USING GELS  

SciTech Connect (OSTI)

This report describes work performed during the third and final year of the project, ''Conformance Improvement Using Gels.'' Corefloods revealed throughput dependencies of permeability reduction by polymers and gels that were much more prolonged during oil flow than water flow. This behavior was explained using simple mobility ratio arguments. A model was developed that quantitatively fits the results and predicts ''clean up'' times for oil productivity when production wells are returned to service after application of a polymer or gel treatment. X-ray computed microtomography studies of gels in strongly water-wet Berea sandstone and strongly oil-wet porous polyethylene suggested that oil penetration through gel-filled pores occurs by a gel-dehydration mechanism, rather than gel-ripping or gel-displacement mechanisms. In contrast, analysis of data from the University of Kansas suggests that the gel-ripping or displacement mechanisms are more important in more permeable, strongly water-wet sandpacks. These findings help to explain why aqueous gels can reduce permeability to water more than to oil under different conditions. Since cement is the most commonly used material for water shutoff, we considered when gels are preferred over cements. Our analysis and experimental results indicated that cement cannot be expected to completely fill (top to bottom) a vertical fracture of any width, except near the wellbore. For vertical fractures with apertures less than 4 mm, the cement slurry will simply not penetrate very far into the fracture. For vertical fractures with apertures greater than 4 mm, the slurry may penetrate a substantial distance into the bottom part of the fracture. However, except near the wellbore, the upper part of the fracture will remain open due to gravity segregation. We compared various approaches to plugging fractures using gels, including (1) varying polymer content, (2) varying placement (extrusion) rate, (3) using partially formed gels, (4) using combinations of high and low molecular weight (Mw) polymers, (5) using secondary crosslinking reactions, (6) injecting un-hydrated polymer particles, and (7) incorporating particulates. All of these methods showed promise in some aspects, but required performance improvements in other aspects. All materials investigated to date showed significant performance variations with fracture width. High pressure gradients and limited distance of penetration are common problems in tight fractures. Gravity segregation and low resistance to breaching are common problems in wide fractures. These will be key issues to address in future work. Although gels can exhibit disproportionate permeability reduction in fractures, the levels of permeability reduction for oil flow are too high to allow practical exploitation in most circumstances. In contrast, disproportionate permeability reduction provided by gels that form in porous rock (adjacent to the fractures) has considerable potential in fractured systems.

Randall S. Seright

2004-09-30T23:59:59.000Z

272

Multiphase flow calculation software  

DOE Patents [OSTI]

Multiphase flow calculation software and computer-readable media carrying computer executable instructions for calculating liquid and gas phase mass flow rates of high void fraction multiphase flows. The multiphase flow calculation software employs various given, or experimentally determined, parameters in conjunction with a plurality of pressure differentials of a multiphase flow, preferably supplied by a differential pressure flowmeter or the like, to determine liquid and gas phase mass flow rates of the high void fraction multiphase flows. Embodiments of the multiphase flow calculation software are suitable for use in a variety of applications, including real-time management and control of an object system.

Fincke, James R. (Idaho Falls, ID)

2003-04-15T23:59:59.000Z

273

The Business Case for Fuel Cells 2010: Why Top Companies are Purchasing  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up from theDepartment of Energy TechnicalFlow RoomTexas(EAP)AtomicThe BigFuel Cells

274

Flow Distances on Open Flow Networks  

E-Print Network [OSTI]

Open flow network is a weighted directed graph with a source and a sink, depicting flux distributions on networks in the steady state of an open flow system. Energetic food webs, economic input-output networks, and international trade networks, are open flow network models of energy flows between species, money or value flows between industrial sectors, and goods flows between countries, respectively. Flow distances (first-passage or total) between any given two nodes $i$ and $j$ are defined as the average number of transition steps of a random walker along the network from $i$ to $j$ under some conditions. They apparently deviate from the conventional random walk distance on a closed directed graph because they consider the openness of the flow network. Flow distances are explicitly expressed by underlying Markov matrix of a flow system in this paper. With this novel theoretical conception, we can visualize open flow networks, calculating centrality of each node, and clustering nodes into groups. We apply fl...

Guo, Liangzhu; Shi, Peiteng; Wang, Jun; Huang, Xiaohan; Zhang, Jiang

2015-01-01T23:59:59.000Z

275

System for measuring multiphase flow using multiple pressure differentials  

DOE Patents [OSTI]

An improved method and system for measuring a multi-phase flow in a pressure flow meter. An extended throat venturi is used and pressure of the multi-phase flow is measured at three or more positions in the venturi, which define two or more pressure differentials in the flow conduit. The differential pressures are then used to calculate the mass flow of the gas phase, the total mass flow, and the liquid phase. The system for determining the mass flow of the high void fraction fluid flow and the gas flow includes taking into account a pressure drop experienced by the gas phase due to work performed by the gas phase in accelerating the liquid phase.

Fincke, James R. (Idaho Falls, ID)

2003-01-01T23:59:59.000Z

276

Improving School Governance | 1 Improving School Governance  

E-Print Network [OSTI]

Improving School Governance | 1 Improving School Governance A Recommended Code of Governance for Schools: A flexible framework for strategic planning October 2012 Pilot version 1 #12;Improving School Governance | 2 #12;Improving School Governance | 3 This pilot version of the Recommended Code of Governance

Rambaut, Andrew

277

Portable wastewater flow meter  

DOE Patents [OSTI]

A portable wastewater flow meter particularly adapted for temporary use at a single location in measuring the rate of liquid flow in a circular entrance conduit of a sewer manhole both under free flow and submerged, open channel conditions and under fill pipe, surcharged conditions, comprising an apparatus having a cylindrical external surface and an inner surface that constricts the flow through the apparatus in such a manner that a relationship exists between (1) the difference between the static pressure head of liquid flowing through the entrance of the apparatus and the static pressure head of liquid flowing through the constriction, and (2) the rate of liquid flow through the apparatus.

Hunter, Robert M. (320 S. Wilson Ave., Bozeman, MT 59715)

1999-02-02T23:59:59.000Z

278

Portable wastewater flow meter  

DOE Patents [OSTI]

A portable wastewater flow meter particularly adapted for temporary use at a single location in measuring the rate of liquid flow in a circular entrance conduit of a sewer manhole both under free flow and submerged, open channel conditions and under full pipe, surcharged conditions, comprising an apparatus having a cylindrical external surface and an inner surface that constricts the flow through the apparatus in such a manner that a relationship exists between (1) the difference between the static pressure head of liquid flowing through the entrance of the apparatus and the static pressure head of liquid flowing through the constriction, and (2) the rate of liquid flow through the apparatus.

Hunter, Robert M. (320 S. Wilson Ave., Bozeman, MT 59715)

1990-01-01T23:59:59.000Z

279

Preserving the Volume of Fluid Using Multi-phase Flow Approach Roman Durikovic  

E-Print Network [OSTI]

complex behaviors. We often see rising bubbles or flow of muddy water, such flows involve sev- eral fluids volume when the fluid passes through a donor cell to an acceptor cell. The VOF method was improved

Durikovic, Roman

280

Energy Efficient Process Heating: Managing Air Flow Kevin Carpenter and Kelly Kissock  

E-Print Network [OSTI]

temperature and decreased combustion gas mass flow rate. The method for calculating savings from preheating flow include minimizing combustion air, preheating combustion air, minimizing ventilation air from minimizing combustion air accounts for improvement in efficiency from increased combustion

Kissock, Kelly

Note: This page contains sample records for the topic "flow improvements purchasing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

CONFORMANCE IMPROVEMENT USING GELS  

SciTech Connect (OSTI)

This technical progress report describes work performed from September 1, 2003, through February 29, 2004, for the project, ''Conformance Improvement Using Gels.'' We examined the properties of several ''partially formed'' gels that were formulated with a combination of high and low molecular weight HPAM polymers. After placement in 4-mm-wide fractures, these gels required about 25 psi/ft for brine to breach the gel (the best performance to date in fractures this wide). After this breach, stabilized residual resistance factors decreased significantly with increased flow rate. Also, residual resistance factors were up to 9 times greater for water than for oil. Nevertheless, permeability reduction factors were substantial for both water and oil flow. Gel with 2.5% chopped fiberglass effectively plugged 4-mm-wide fractures if a 0.5-mm-wide constriction was present. The ability to screen-out at a constriction appears crucial for particulate incorporation to be useful in plugging fractures. In addition to fiberglass, we examined incorporation of polypropylene fibers into gels. Once dispersed in brine or gelant, the polypropylene fibers exhibited the least gravity segregation of any particulate that we have tested to date. In fractures with widths of at least 2 mm, 24-hr-old gels (0.5% high molecular weight HPAM) with 0.5% fiber did not exhibit progressive plugging during placement and showed extrusion pressure gradients similar to those of gels without the fiber. The presence of the fiber roughly doubled the gel's resistance to first breach by brine flow. The breaching pressure gradients were not as large as for gels made with high and low molecular weight polymers (mentioned above). However, their material requirements and costs (i.e., polymer and/or particulate concentrations) were substantially lower than for those gels. A partially formed gel made with 0.5% HPAM did not enter a 0.052-mm-wide fracture when applying a pressure gradient of 65 psi/ft. This result suggests a lower limit of fracture width for entry of formed or partially formed gels (when reasonable pressure gradients are applied). In unfractured porous rock, we investigated the time dependence of oil and water permeabilities during various cycles of oil and water injection after placement of a Cr(III)-acetate-HPAM gel. Permeability to water stabilized rapidly (within 1 pore volume, PV), while permeability to oil stabilized gradually over the course of 100 PV. The behavior was surprisingly insensitive to core material (strongly water-wet Berea sandstone and strongly oil-wet porous polyethylene), core permeability (740 to 10,000 md), and applied pressure gradient (10 to 100 psi/ft).

Randall S. Seright

2004-03-01T23:59:59.000Z

282

Model Developments for Development of Improved Emissions Scenarios: Developing Purchasing-Power Parity Models, Analyzing Uncertainty, and Developing Data Sets for Gridded Integrated Assessment Models  

SciTech Connect (OSTI)

In the duration of this project, we finished the main tasks set up in the initial proposal. These tasks include: setting up the basic platform in GAMS language for the new RICE 2007 model; testing various model structure of RICE 2007; incorporating PPP data set in the new RICE model; developing gridded data set for IA modeling.

Yang, Zili; Nordhaus, William

2009-03-19T23:59:59.000Z

283

Improved Biomass Cooking Stoves and Improved Stove Emission Equipment  

SciTech Connect (OSTI)

In developing countries, there is an urgent need for access to safe, efficient, and more affordable cooking technologies. Nearly 2.5 billion people currently use an open fire or traditional cookstove to prepare their meals, and recent models predict that use of biomass for cooking will continue to be the dominant energy use in rural, resource-poor households through 2030. For these families, cooking poses serious risks to health, safety, and income. An alarming 4 million people, primarily women and children, die prematurely each year from indoor and outdoor exposure to the harmful emissions released by solid fuel combustion. Use of traditional stoves can also have a significant impact on deforestation and climate change. This dire situation creates a critical need for cookstoves that significantly and verifiably reduce fuel use and emissions in order to reach protective levels for human health and the environment. Additionally, advances in the scientific equipment needed to measure and monitor stove fuel use and emissions have not kept pace with the significant need within the industry. While several testing centers in the developed world may have hundred thousand-dollar emissions testing systems, organizations in the field have had little more than a thermometer, a scale, and subjective observations to quantify the performance of stove designs. There is an urgent need for easy-to-use, inexpensive, accurate, and robust stove testing equipment for use by laboratory and field researchers around the world. ASAT and their research partner, Aprovecho Research Center (ARC), have over thirty years of experience addressing these two needs, improved cookstoves and emissions monitoring equipment, with expertise spanning the full spectrum of development from conceptual design to product manufacturing and dissemination. This includes: 1) research, design, and verification of clean biomass cookstove technology and emissions monitoring equipment; 2) mass production of quality-controlled stove and emissions equipment at levels scalable to meet global demand; and 3) global distribution through a variety of channels and partners. ARC has been instrumental in designing and improving more than 100 stove designs over the past thirty years. In the last four years, ASAT and ARC have played a key role in the production and sales of over 200,000 improved stoves in the developed and developing world. The ARC-designed emissions equipment is currently used by researchers in laboratories and field studies on five continents. During Phase I of the DOE STTR grant, ASAT and ARC worked together to apply their wealth of product development experience towards creating the next generation of improved cookstoves and emissions monitoring equipment. Highlights of Phase I for the biomass cookstove project include 1) the development of several new stove technologies that reached the DOE 50/90 benchmark; 2) fabrication of new stove prototypes by ASATís manufacturing partner, Shengzhou Stove Manufacturing (SSM); 3) field testing of prototype stoves with consumers in Puerto Rico and the US; and 4) the selection of three stove prototypes for further development and commercialization during Phase II. Highlights of Phase I for the emissions monitoring equipment project include: 1) creation of a new emissions monitoring equipment product, the Laboratory Emissions Monitoring System (LEMS 2) the addition of gravimetric PM measurements to the stove testing systems to meet International Standards Organization criteria; 3) the addition of a CO{sub 2} sensor and wireless 3G capability to the IAP Meter; and 4) and the improvement of sensors and signal quality on all systems. Twelve Regional Testing and Knowledge Centers purchased this equipment during the Phase I project period.

HATFIELD, MICHAEL; Still, Dean

2013-04-15T23:59:59.000Z

284

EXPENSE REQUEST FORM This form must be completed and submitted to the Sport Clubs Office BEFORE any purchase will be made for your club. All incomplete requests will be returned to  

E-Print Network [OSTI]

please put entire rental period): WHY (Why are you making this purchase?): OFFICE USE ONLY Account # 1026EXPENSE REQUEST FORM This form must be completed and submitted to the Sport Clubs Office BEFORE any purchase will be made for your club. All incomplete requests will be returned to your club mailbox

Amin, S. Massoud

285

The direct economic effects of a policy to provide government subsidized price discounts for the purchase of fruit and vegetable by food stamp recipients.  

E-Print Network [OSTI]

for the purchase of fruit and vegetable by food stamp recipients. by Karen M. Jetter Assistant Research Economist price discounts on fresh fruit and vegetable to food stamp recipients. The suggestion for a price discount on fruit and vegetable for food stamps recipients is contained in the 2004 Farm Bill, section 4116

California at Davis, University of

286

Important Enrollment and Disclaimer Information for LSU Vendors In February 2006, LSU implemented a new online purchasing system, called PRO, which houses new  

E-Print Network [OSTI]

1 Important Enrollment and Disclaimer Information for LSU Vendors In February 2006, LSU implemented a new online purchasing system, called PRO, which houses new Vendor and Commodity databases. Prospective vendors must complete and submit the LSU Vendor Enrollment Form to establish a PRO vendor database record

Harms, Kyle E.

287

Environmental assessment for the purchase of Russian low enriched uranium derived from the dismantlement of nuclear weapons in the countries of the former Soviet Union  

SciTech Connect (OSTI)

The United States is proposing to purchase from the Russian Federation low enriched uranium (LEU) derived from highly enriched uranium (HEU) resulting from the dismantlement of nuclear weapons in the countries of the former Soviet Union. The purchase would be accomplished through a proposed contract requiring the United States to purchase 15,250 metric tons (tonnes) of LEU (or 22,550 tonnes of UF{sub 6}) derived from blending 500 metric tones uranium (MTU) of HEU from nuclear warheads. The LEU would be in the form of uranium hexafluoride (UF{sub 6}) and would be converted from HEU in Russia. The United States Enrichment Corporation (USEC) is the entity proposing to undertake the contract for purchase, sale, and delivery of the LEU from the Russian Federation. The US Department of Energy (DOE) is negotiating the procedure for gaining confidence that the LEU is derived from HEU that is derived from dismantled nuclear weapons (referred to as ``transparency),`` and would administer the transparency measures for the contract. There are six environments that could potentially be affected by the proposed action; marine (ocean); US ports of entry; truck or rail transportation corridors; the Portsmouth GDP; the electric power industry; and the nuclear fuel cycle industry. These environmental impacts are discussed.

Not Available

1994-01-01T23:59:59.000Z

288

In 2007 a consortium of public purchasers met to discuss the current initiatives to support sustainable procurement in Manitoba. The discussions identified a need for a  

E-Print Network [OSTI]

sustainable procurement in Manitoba. The discussions identified a need for a web based tool to provide practical knowledge to public purchasers. A Sustainable Procurement website working group was established, the working group began meeting on a monthly basis to develop the architecture and content of the website

Martin, Jeff

289

An improved theory for regenerative pump performance  

E-Print Network [OSTI]

An improved theory for regenerative pump performance T Meakhail and S O Park Department. DOI: 10.1243/095765005X7565 Abstract: Owing to their low specific speed, regenerative pumps allow high heads with small flow rates and have performance curves with very stable features. This kind of pump

Kim, Yong Jung

290

Free Flow Power Partners to Improve Hydrokinetic Turbine Performance and  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGY TAX POLICIES7.pdf Flash2010-57.pdfDepartment ofFramework for SCADA Security PolicyCost

291

Mechanical analysis of a cross flow filter. Final report, January 31, 1995  

SciTech Connect (OSTI)

A cross flow filter for particulate control is described. Objectives were to improve the reliability and mechanical integrity of the filter.

NONE

1998-12-31T23:59:59.000Z

292

A slotted orifice plate used as a flow measurement device  

E-Print Network [OSTI]

The standard orifice plate is used extensively by the natural gas industry for the metering of fuel. Because of the costs associated with errors in flow measurement inherent with the use of a standard orifice plate, any improvements upon...

Macek, Michael Lee

2012-06-07T23:59:59.000Z

293

Grid adaptation for functional outputs of compressible flow simulations  

E-Print Network [OSTI]

An error correction and grid adaptive method is presented for improving the accuracy of functional outputs of compressible flow simulations. The procedure is based on an adjoint formulation in which the estimated error in ...

Venditti, David Anthony, 1973-

2002-01-01T23:59:59.000Z

294

Ultrasonic flow metering system  

DOE Patents [OSTI]

A system for determining the density, flow velocity, and mass flow of a fluid comprising at least one sing-around circuit that determines the velocity of a signal in the fluid and that is correlatable to a database for the fluid. A system for determining flow velocity uses two of the inventive circuits with directional transmitters and receivers, one of which is set at an angle to the direction of flow that is different from the others.

Gomm, Tyler J. (Meridian, ID); Kraft, Nancy C. (Idaho Falls, ID); Mauseth, Jason A. (Pocatello, ID); Phelps, Larry D. (Pocatello, ID); Taylor, Steven C. (Idaho Falls, ID)

2002-01-01T23:59:59.000Z

295

Elbow mass flow meter  

DOE Patents [OSTI]

Elbow mass flow meter. The present invention includes a combination of an elbow pressure drop generator and a shunt-type mass flow sensor for providing an output which gives the mass flow rate of a gas that is nearly independent of the density of the gas. For air, the output is also approximately independent of humidity.

McFarland, Andrew R. (College Station, TX); Rodgers, John C. (Santa Fe, NM); Ortiz, Carlos A. (Bryan, TX); Nelson, David C. (Santa Fe, NM)

1994-01-01T23:59:59.000Z

296

A coupled model for ring dynamics, gas flow, and oil flow through the ring grooves in IC engines  

E-Print Network [OSTI]

Oil flows through ring/groove interface play a critical role in oil transport among different regions the piston ring pack of internal combustion engines. This thesis work is intended to improve the understanding and ...

Jia, Ke, S. M. Massachusetts Institute of Technology

2009-01-01T23:59:59.000Z

297

Milestone Plan Process Improvement  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Milestone Plan Process Improvement Milestone Plan Process Improvement Background In response to our community's concern over the milestone plan (MP) process within the system, the...

298

A New Approach to Computing Max Flows using Electrical Flows  

E-Print Network [OSTI]

A New Approach to Computing Max Flows using Electrical Flows Yin Tat Lee (MIT) Satish Rao (UC-Kelner-Madry-Spielman-Teng'11]: approximate flow in time Uses electrical flows. 7 #12;Electrical Flows 3 1 S t 8 #12;Electrical Flows Identify Graph with Resistor Network R(e)=1/w(e) 1/3 S t 1 9 #12;Electrical Flows Electrical flow

Rajamani, Sriram K.

299

Quantitative tomographic measurements of opaque multiphase flows  

SciTech Connect (OSTI)

An electrical-impedance tomography (EIT) system has been developed for quantitative measurements of radial phase distribution profiles in two-phase and three-phase vertical column flows. The EIT system is described along with the computer algorithm used for reconstructing phase volume fraction profiles. EIT measurements were validated by comparison with a gamma-densitometry tomography (GDT) system. The EIT system was used to accurately measure average solid volume fractions up to 0.05 in solid-liquid flows, and radial gas volume fraction profiles in gas-liquid flows with gas volume fractions up to 0.15. In both flows, average phase volume fractions and radial volume fraction profiles from GDT and EIT were in good agreement. A minor modification to the formula used to relate conductivity data to phase volume fractions was found to improve agreement between the methods. GDT and EIT were then applied together to simultaneously measure the solid, liquid, and gas radial distributions within several vertical three-phase flows. For average solid volume fractions up to 0.30, the gas distribution for each gas flow rate was approximately independent of the amount of solids in the column. Measurements made with this EIT system demonstrate that EIT may be used successfully for noninvasive, quantitative measurements of dispersed multiphase flows.

GEORGE,DARIN L.; TORCZYNSKI,JOHN R.; SHOLLENBERGER,KIM ANN; O'HERN,TIMOTHY J.; CECCIO,STEVEN L.

2000-03-01T23:59:59.000Z

300

Low flow fume hood  

DOE Patents [OSTI]

A fume hood is provided having an adequate level of safety while reducing the amount of air exhausted from the hood. A displacement flow fume hood works on the principal of a displacement flow which displaces the volume currently present in the hood using a push-pull system. The displacement flow includes a plurality of air supplies which provide fresh air, preferably having laminar flow, to the fume hood. The displacement flow fume hood also includes an air exhaust which pulls air from the work chamber in a minimally turbulent manner. As the displacement flow produces a substantially consistent and minimally turbulent flow in the hood, inconsistent flow patterns associated with contaminant escape from the hood are minimized. The displacement flow fume hood largely reduces the need to exhaust large amounts of air from the hood. It has been shown that exhaust air flow reductions of up to 70% are possible without a decrease in the hood's containment performance. The fume hood also includes a number of structural adaptations which facilitate consistent and minimally turbulent flow within a fume hood.

Bell, Geoffrey C. (Pleasant Hill, CA); Feustel, Helmut E. (Albany, CA); Dickerhoff, Darryl J. (Berkeley, CA)

2002-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "flow improvements purchasing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Device for deriving energy from a flow of fluid  

SciTech Connect (OSTI)

Improved process and device for extracting energy present in a flowing fluid medium wherein a supported hub with propellers or blades is placed in said medium and the blades are provided with a wing or vane at the tip. The wing is of such a form that it generates a ''venturi effect'' in the flowing medium by which a part of the fluid which should normally pass outside the propeller disc area, is drawn into the propeller. The improvement consists of mixing of fluid which normally should pass outside the venturi with fluid which has flowed through the blades by provisions on blades and/or wing or vanes.

van Holten, T.

1982-12-07T23:59:59.000Z

302

Integrated supercritical water gasification combined cycle (IGCC) systems for improved performance and reduced operating costs in existing plants  

SciTech Connect (OSTI)

A revolutionary hydrothermal heat recovery steam generator (HRSG) is being developed to produce clean fuels for gas turbines from slurries and emulsions of opportunity fuels. Water can be above 80% by weight and solids below 20%, including coal fines, coal water fuels, biomass, composted municipal refuse, sewage sludge and bitumen/Orimulsion. The patented HRSG tubes use a commercial method of particle scrubbing to improve heat transfer and prevent corrosion and deposition on heat transfer surfaces. A continuous-flow pilot plant is planned to test the HRSG over a wide range of operating conditions, including the supercritical conditions of water, above 221 bar (3,205 psia) and 374 C (705 F). Bench scale data shows, that supercritical water gasification below 580 C (1,076 F) and low residence time without catalysts or an oxidizer can produce a char product that can contain carbon up to the amount of fixed carbon in the proximate analysis of the solids in the feed. This char can be burned with coal in an existing combustion system to provide the heat required for gasification. The new HRSG tubes can be retrofitted into existing power plant boilers for repowering of existing plants for improved performance and reduced costs. A special condensing turbine allows final low-temperature cleaning and maintains quality and combustibility of the fuel vapor for modern gas turbine in the new Vapor Transmission Cycle (VTC). Increased power output and efficiency can be provided for existing plants, while reducing fuel costs. A preliminary computer-based process simulation model has been prepared that includes material and energy balances that simulate commercial-scale operations of the VTC on sewage sludge and coal. Results predict over 40% HHV thermal efficiency to electric power from sewage sludge at more than 83% water by weight. The system appears to become autothermal (no supplemental fuel required) at about 35% fixed carbon in the feed. Thus, bituminous and lignite coal slurries could be gasified at less than 25% coal and more than 75% water. Preliminary life cycle cost analyses indicate that disposal fees for sewage sludge improve operating economics over fuel that must be purchased, the cost and schedule advantages of natural gas-fired combined cycle systems are preserved. Sensitivity analyses show that increasing capital costs by 50% can be offset by an increase in sewage sludge disposal fees of $10/metric ton.

Tolman, R.; Parkinson, W.J.

1999-07-01T23:59:59.000Z

303

Inductively coupled plasma torch with laminar flow cooling  

DOE Patents [OSTI]

An improved inductively coupled gas plasma torch. The torch includes inner and outer quartz sleeves and tubular insert snugly fitted between the sleeves. The insert includes outwardly opening longitudinal channels. Gas flowing through the channels of the insert emerges in a laminar flow along the inside surface of the outer sleeve, in the zone of plasma heating. The laminar flow cools the outer sleeve and enables the torch to operate at lower electrical power and gas consumption levels additionally, the laminar flow reduces noise levels in spectroscopic measurements of the gaseous plasma.

Rayson, Gary D. (Las Cruces, NM); Shen, Yang (Las Cruces, NM)

1991-04-30T23:59:59.000Z

304

Turbulent flow in graphene  

E-Print Network [OSTI]

We demonstrate the possibility of a turbulent flow of electrons in graphene in the hydrodynamic region, by calculating the corresponding turbulent probability density function. This is used to calculate the contribution of the turbulent flow to the conductivity within a quantum Boltzmann approach. The dependence of the conductivity on the system parameters arising from the turbulent flow is very different from that due to scattering.

Kumar S. Gupta; Siddhartha Sen

2010-06-05T23:59:59.000Z

305

Strategies for improving traffic operations at oversaturated signalized diamond interchanges  

E-Print Network [OSTI]

street improvement goals should include improved traffic flow along with reductions in congestion, air pollution, and energy use, without major new construction. Super-street arterials, which are multi-lane arterials with limited access and a limited...STRATEGIES FOR IMPROVING TRAFFIC OPERATIONS AT OVERSATURATED SIGNALIZED DIAMOND INTERCHANGES A Thesis by GEORGE CURTIS HERRICK Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements...

Herrick, George Curtis

1992-01-01T23:59:59.000Z

306

Productivity & Energy Flow  

E-Print Network [OSTI]

1 Productivity & Energy Flow Ecosystem approach, focuses: on flow of energy, water, and nutrients (capture) of energy by autotrophs Gross (total) Net (total ­ costs) Secondary productivity- capture of energy by herbivores http://sciencebitz.com/?page_id=204 What Controls the Primary Productivity

Mitchell, Randall J.

307

Elbow mass flow meter  

DOE Patents [OSTI]

The present invention includes a combination of an elbow pressure drop generator and a shunt-type mass flow sensor for providing an output which gives the mass flow rate of a gas that is nearly independent of the density of the gas. For air, the output is also approximately independent of humidity. 3 figs.

McFarland, A.R.; Rodgers, J.C.; Ortiz, C.A.; Nelson, D.C.

1994-08-16T23:59:59.000Z

308

Microelectromechanical flow control apparatus  

DOE Patents [OSTI]

A microelectromechanical (MEM) flow control apparatus is disclosed which includes a fluid channel formed on a substrate from a first layer of a nonconducting material (e.g. silicon nitride). A first electrode is provided on the first layer of the nonconducting material outside the flow channel; and a second electrode is located on a second layer of the nonconducting material above the first layer. A voltage applied between the first and second electrodes deforms the fluid channel to increase its cross-sectional size and thereby increase a flow of a fluid through the channel. In certain embodiments of the present invention, the fluid flow can be decreased or stopped by applying a voltage between the first electrode and the substrate. A peristaltic pumping of the fluid through the channel is also possible when the voltage is applied in turn between a plurality of first electrodes and the substrate. A MEM flow control assembly can also be formed by providing one or more MEM flow control devices on a common substrate together with a submicron filter. The MEM flow control assembly can optionally include a plurality of pressure sensors for monitoring fluid pressure and determining flow rates through the assembly.

Okandan, Murat (NE Albuquerque, NM)

2009-06-02T23:59:59.000Z

309

Economic Improvement Districts (Indiana)  

Broader source: Energy.gov [DOE]

A legislative body may adopt an ordinance establishing an economic improvement district and an Economic Improvement Board to manage development in a respective district. The Board can choose to...

310

Solar Power Purchase Agreements  

Office of Energy Efficiency and Renewable Energy (EERE)

This presentation was given January 15, 2013, by Brian Millberg, Energy Manager for the City of Minneapolis, Minnesota, as part of the CommRE Developing PV Projects With RFPs and PPAs webinar.

311

Austin- Green Power Purchasing  

Broader source: Energy.gov [DOE]

Under the Austin Climate Protection Plan, the City Council has set numerous goals for renewable energy, energy efficiency, and carbon emission reductions with the overall goal of making Austin a...

312

CONTRACTOR PURCHASING SYSTEM REVIEWS  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

HIGH (3) --Performance data casts significant doubt on the ability of the system or key process ability to meet requirements. A major disruption is highly probable and the...

313

Green Power Purchasing  

Broader source: Energy.gov [DOE]

Under terms of legislation (SB 459) enacted in March 2006, Wisconsin's Departments of Administration, Corrections, Health and Family Services, Public Instruction, Veterans Affairs, and the Board of...

314

Green Power Purchasing Commitment  

Broader source: Energy.gov [DOE]

In April 2007, Massachusetts Gov. Deval Patrick signed Executive Order 484, titled ďLeading by Example: Clean Energy and Efficient Buildings.Ē This order establishes numerous energy targets and...

315

Volume Purchasing Alliances  

Broader source: Energy.gov [DOE]

Economies of scale can potentially reduce first costs of capital expenditures, given that price quotes for LED products often vary significantly by the size of the order, particularly when less...

316

Guarding against purchase scams  

SciTech Connect (OSTI)

Every business owner who sells a credit, e.g., the sale by the manufacturer, jobber, or wholesaler to a retail outlet, faces some risk. In recent years the FBI has had occasion to investigate a form of fraud being perpetrated upon those who sell on credit. However, the risk can be lessened if the firm making the sales on credit takes precautionary measures. Some of these measures are listed and discussed.

Arkin, J.

1986-05-01T23:59:59.000Z

317

Purchasing | The Ames Laboratory  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar HomePromising Science for1 2011 Publications Wood, V., Panzer,

318

CONDITIONS OF PURCHASE  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed New Substation Sites Proposed Route BTRICGEGR-N Goods PO 1 of 8 GE Global Research

319

CONDITIONS OF PURCHASE  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed New Substation Sites Proposed Route BTRICGEGR-N Goods PO 1 of 8 GE Global Researchof

320

Power Purchase Agreements  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department ofT ib l L d FNEPA/309 Reviewers | DepartmentSiteMaryland |2POWERWebinars

Note: This page contains sample records for the topic "flow improvements purchasing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Power Purchase Agreements Update  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department ofT ib l L d FNEPA/309 Reviewers | DepartmentSiteMaryland |2POWERWebinarsApril

322

CONTRACTOR PURCHASING SYSTEM REVIEWS  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up fromDepartmentTie Ltd:June 2015 <Ones |Laboratory, JuneDid y ou knowofPRGM NAME

323

Elliptic flow phenomenon at ATLAS  

E-Print Network [OSTI]

We summarize measurements of elliptic flow and higher order flow harmonics performed by the ATLAS experiment at the LHC. Results on event-averaged flow measurements and event-plane correlations in Pb+Pb collisions are discussed along with the event-by-event flow measurements. Further, we summarize results on flow in p+Pb collisions.

Martin Spousta

2014-06-20T23:59:59.000Z

324

Real-time planar flow velocity measurements using an optical flow algorithm implemented on GPU  

E-Print Network [OSTI]

This paper presents a high speed implementation of an optical flow algorithm which computes planar velocity fields in an experimental flow. Real-time computation of the flow velocity field allows the experimentalist to have instantaneous access to quantitative features of the flow. This can be very useful in many situations: fast evaluation of the performances and characteristics of a new setup, design optimization, easier and faster parametric studies, etc. It can also be a valuable measurement tool for closed-loop flow control experiments where fast estimation of the state of the flow is needed. The algorithm is implemented on a Graphics Processing Unit (GPU). The accuracy of the computation is shown. Computation speed and scalability are highlighted along with guidelines for further improvements. The system architecture is flexible, scalable and can be adapted on the fly in order to process higher resolutions or achieve higher precision. The set-up is applied on a Backward-Facing Step (BFS) flow in a hydro...

Gautier, N

2013-01-01T23:59:59.000Z

325

Air-flow regulation system for a coal gasifier  

DOE Patents [OSTI]

An improved air-flow regulator for a fixed-bed coal gasifier is provided which allows close air-flow regulation from a compressor source even though the pressure variations are too rapid for a single primary control loop to respond. The improved system includes a primary controller to control a valve in the main (large) air supply line to regulate large slow changes in flow. A secondary controller is used to control a smaller, faster acting valve in a secondary (small) air supply line parallel to the main line valve to regulate rapid cyclic deviations in air flow. A low-pass filter with a time constant of from 20 to 50 seconds couples the output of the secondary controller to the input of the primary controller so that the primary controller only responds to slow changes in the air-flow rate, the faster, cyclic deviations in flow rate sensed and corrected by the secondary controller loop do not reach the primary controller due to the high frequency rejection provided by the filter. This control arrangement provides at least a factor of 5 improvement in air-flow regulation for a coal gasifier in which air is supplied by a reciprocating compressor through a surge tank.

Fasching, George E. (Morgantown, WV)

1984-01-01T23:59:59.000Z

326

A study of the coherent structures and installation effects in an orifice flow meter  

E-Print Network [OSTI]

. Errors on the order of approximately 250 millions of dollar per year have been estimated for the natural gas industry. The urgent need to improve the accuracy has fueled basic research in the area of orifice flow meters. The objectives of this present... study were to analyze the coherent structures present in an orifice flow meter, and to examine the effect of a flow conditioner placed upstream of the orifice plate on the flow meter's accuracy, The coherent structures were measured by performing...

Pattabhi, Srikanth

2012-06-07T23:59:59.000Z

327

Improving Stormwater Quality  

E-Print Network [OSTI]

of water resources. Stormwater, when produced by rain or snowmelt flowing over the land, captures debris, chemicals, hazardous wastes, and/or sediment. These contaminants then make their way to drainage systems that flow directly into rivers, lakes..., wetlands, or bays. The polluted stormwa- ter runoff can affect the health of plants, fish, animals, and people, as well as reduce the recreational value of water resources. Urbanization also has a major impact on the quality of local streams because...

Garcia, Raul

2005-01-01T23:59:59.000Z

328

Fire alarm system improvement  

SciTech Connect (OSTI)

This document contains the Fire Alarm System Test Procedure for Building 234-5Z, 200-West Area on the Hanford Reservation, Richland, Washington. This Acceptance Test Procedure (ATP) has been prepared to demonstrate that the modifications to the Fire Protection systems function as required by project criteria. The ATP will test the Fire Alarm Control Panels, Flow Alarm Pressure Switch, Heat Detectors, Smoke Detectors, Flow Switches, Manual Pull Stations, and Gong/Door by Pass Switches.

Hodge, S.G.

1994-10-01T23:59:59.000Z

329

Bypass Flow Study  

SciTech Connect (OSTI)

The purpose of the fluid dynamics experiments in the MIR (Matched Index of-Refraction) flow system at Idaho National Laboratory (INL) is to develop benchmark databases for the assessment of Computational Fluid Dynamics (CFD) solutions of the momentum equations, scalar mixing, and turbulence models for the flow ratios between coolant channels and bypass gaps in the interstitial regions of typical prismatic standard fuel element (SFE) or upper reflector block geometries of typical Modular High-temperature Gas-cooled Reactors (MHTGR) in the limiting case of negligible buoyancy and constant fluid properties. The experiments use Particle Image Velocimetry (PIV) to measure the velocity fields that will populate the bypass flow study database.

Richard Schultz

2011-09-01T23:59:59.000Z

330

Magnetically stimulated fluid flow patterns  

ScienceCinema (OSTI)

Sandia National Laboratories' Jim Martin and Kyle Solis explain research on the effects of magnetic fields on fluid flows and how they stimulate vigorous flows. Fluid flow is a necessary phenomenon in everything from reactors to cooling engines in cars.

Martin, Jim; Solis, Kyle

2014-08-06T23:59:59.000Z

331

Optical flow switching  

E-Print Network [OSTI]

Present-day networks are being challenged by dramatic increases in bandwidth demand of emerging applications. We will explore a new transport, ldquooptical flow switchingrdquo, that will enable significant growth and ...

Chan, Vincent W. S.

332

Parallel flow diffusion battery  

DOE Patents [OSTI]

A parallel flow diffusion battery for determining the mass distribution of an aerosol has a plurality of diffusion cells mounted in parallel to an aerosol stream, each diffusion cell including a stack of mesh wire screens of different density.

Yeh, H.C.; Cheng, Y.S.

1984-01-01T23:59:59.000Z

333

Improving Lives. Improving Texas. Agency Strategic Plan  

E-Print Network [OSTI]

. Williams Administration Building 7101 TAMU September 2009 College Station, TX 77843-7101 Phone: 979. In the context of this broad mission, the priorities for Extension education are: Ensure a sustainable and management. Build local capacity for economic development in Texas communities. Improve the health

334

Binary fish passage models for uniform and nonuniform flows  

SciTech Connect (OSTI)

Binary fish passage models are considered by many fisheries managers to be the best 21 available practice for culvert inventory assessments and for fishway and barrier design. 22 Misunderstandings between different binary passage modeling approaches often arise, 23 however, due to differences in terminology, application and presentation. In this paper 24 one-dimensional binary fish passage models are reviewed and refined to clarify their 25 origins and applications. For uniform flow, a simple exhaustion-threshold (ET) model 26 equation is derived that predicts the flow speed threshold in a fishway or velocity barrier 27 that causes exhaustion at a given maximum distance of ascent. Flow speeds at or above 28 the threshold predict failure to pass (exclusion). Flow speeds below the threshold predict 29 passage. The binary ET model is therefore intuitive and easily applied to predict passage 30 or exclusion. It is also shown to be consistent with the distance-maximizing model. The 31 ET model s limitation to uniform flow is addressed by deriving a passage model that 32 accounts for nonuniform flow conditions more commonly found in the field, including 33 backwater profiles and drawdown curves. Comparison of these models with 34 experimental observations of volitional passage for Gambusia affinis in uniform and 35 nonuniform flows indicates reasonable prediction of binary outcomes (passage or 36 exclusion) if the flow speed is not near the threshold flow velocity. More research is 37 needed on fish behavior, passage strategies under nonuniform flow regimes and 38 stochastic methods that account for individual differences in swimming performance at or 39 near the threshold flow speed. Future experiments should track and measure ground 40 speeds of ascending fish to test nonuniform flow passage strategies and to improve model 41 predictions. Stochastic models, such as Monte-Carlo techniques, that account for 42 different passage performance among individuals and allow prediction of the percentage 43 of fish passing would be particularly useful near flow speed thresholds where binary 44 passage models are clearly limited.

Neary, Vincent S [ORNL

2011-01-01T23:59:59.000Z

335

Section 13: Flow control 1 Section 13: Flow control  

E-Print Network [OSTI]

Geometries for Energyefficient Flow Around Bodies Abstract 14:30 ≠ 14:50: Elfriede Friedmann (Universitšt

Kohlenbach, Ulrich

336

Trivializing maps, the Wilson flow and the HMC algorithm  

E-Print Network [OSTI]

In lattice gauge theory, there exist field transformations that map the theory to the trivial one, where the basic field variables are completely decoupled from one another. Such maps can be constructed systematically by integrating certain flow equations in field space. The construction is worked out in some detail and it is proposed to combine the Wilson flow (which generates approximately trivializing maps for the Wilson gauge action) with the HMC simulation algorithm in order to improve the efficiency of lattice QCD simulations.

Martin LŁscher

2009-12-03T23:59:59.000Z

337

Energy Flow Energy Flow Energy Flow A.Ukleja, T.Tymieniecka, I.Skillicorn 1 Azimuthal asymmetry  

E-Print Network [OSTI]

Energy Flow Energy Flow Energy Flow A.Ukleja, T.Tymieniecka, I.Skillicorn 1 Azimuthal asymmetry using energy flow method Azimuthal angle distribution at Q2 >100 GeV2 Energy flow method.Ukleja on behalf of the ZEUS Collaboration #12; Energy Flow Energy Flow Energy Flow A.Ukleja, T.Tymieniecka, I

338

Evaluation of flow hood measurements for residential register flows  

SciTech Connect (OSTI)

Flow measurement at residential registers using flow hoods is becoming more common. These measurements are used to determine if the HVAC system is providing adequate comfort, appropriate flow over heat exchangers and in estimates of system energy losses. These HVAC system performance metrics are determined by using register measurements to find out if individual rooms are getting the correct airflow, and in estimates of total air handler flow and duct air leakage. The work discussed in this paper shows that commercially available flow hoods are poor at measuring flows in residential systems. There is also evidence in this and other studies that flow hoods can have significant errors even when used on the non-residential systems they were originally developed for. The measurement uncertainties arise from poor calibrations and the sensitivity of exiting flow hoods to non-uniformity of flows entering the device. The errors are usually large--on the order of 20% of measured flow, which is unacceptably high for most applications. Active flow hoods that have flow measurement devices that are insensitive to the entering airflow pattern were found to be clearly superior to commercially available flow hoods. In addition, it is clear that current calibration procedures for flow hoods may not take into account any field application problems and a new flow hood measurement standard should be developed to address this issue.

Walker, I.S.; Wray, C.P.; Dickerhoff, D.J.; Sherman, M.H.

2001-09-01T23:59:59.000Z

339

Piezoelectric axial flow microvalve  

SciTech Connect (OSTI)

This invention is directed to a fuel cell operable with a quantity of fuel and a quantity of an oxidizer to produce electrical power, the fuel cell including a fuel cell body including a labyrinth system structured to permit the fuel and the oxidizer to flow therethrough; at least a first catalyst in fluid communication with the labyrinth; and at least a first microvalve operably disposed within at least a portion of the labyrinth. The microvalve utilizes a deflectable member operable upon the application of a voltage from a voltage source. The microvalve includes an elongated flow channel formed therein and extending substantially longitudinally between the first and second ends to permit substantially longitudinal flow of the fluid therethrough and between the first and second ends; and the deflectable member disposed on the valve body, the deflectable member including at least a first piezoelectric portion that is piezoelectrically operable to deflect the deflectable member between an open position and a closed position upon the application of a voltage, the deflectable member in the closed position being operable to resist the flow of the fluid through the flow channel.

Gemmen, Randall; Thornton, Jimmy; Vipperman, Jeffrey S.; Clark, William W.

2007-01-09T23:59:59.000Z

340

U.S. Residential Photovoltaic (PV) System Prices, Q4 2013 Benchmarks: Cash Purchase, Fair Market Value, and Prepaid Lease Transaction Prices  

SciTech Connect (OSTI)

The price of photovoltaic (PV) systems in the United States (i.e., the cost to the system owner) has dropped precipitously in recent years, led by substantial reductions in global PV module prices. This report provides a Q4 2013 update for residential PV systems, based on an objective methodology that closely approximates the book value of a PV system. Several cases are benchmarked to represent common variation in business models, labor rates, and module choice. We estimate a weighted-average cash purchase price of $3.29/W for modeled standard-efficiency, polycrystalline-silicon residential PV systems installed in the United States. This is a 46% decline from the 2013-dollar-adjusted price reported in the Q4 2010 benchmark report. In addition, this report frames the cash purchase price in the context of key price metrics relevant to the continually evolving landscape of third-party-owned PV systems by benchmarking the minimum sustainable lease price and the fair market value of residential PV systems.

Davidson, C.; James, T. L.; Margolis, R.; Fu, R.; Feldman, D.

2014-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "flow improvements purchasing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

A report to Congress on a role for federal purchasing in commercializing new energy-efficient and renewable-energy technologies  

SciTech Connect (OSTI)

The purpose of this study is to satisfy the requirements of Section 152 of the Energy Policy Act of 1992 (EPAct 92), which directs the Secretary of Energy to ``evaluate the potential use of the purchasing power of the Federal government to promote the development and commercialization of energy efficient products`` (US Congress 1992). Here, purchasing power implies a market presence by the Federal government that is large enough to influence decisions by manufacturers and suppliers about new-product introduction. In recent years, as energy use has become more efficient in the United States in both the public and private sectors, a major contributor to this transition has been the development of innovative technologies and products that reduce the use of energy and/or that use renewable forms of energy. Although the Nation`s efforts toward greater efficiency have been impressive, there are still many opportunities for the widespread introduction of even more energy-saving innovations. This report outlines the actions that DOE can take, in partnership with other Federal agencies, to address the barriers and realize the opportunities from commercializing new technologies.

NONE

1997-12-16T23:59:59.000Z

342

Electrocapturing flow cell  

DOE Patents [OSTI]

A flow cell for electrophoretically-assisted capturing analytes from a flow. The flow cell includes a specimen chamber, a first membrane, a second membrane, a first electrode chamber, and a second electrode chamber. The specimen chamber may have a sample inlet and a sample outlet. A first portion of the first membrane may be coupled to a first portion of the specimen chamber. A first portion of the second membrane may be coupled to a second portion of the specimen chamber. The first electrode chamber may be configured to accept a charge. A portion of the first electrode chamber may be coupled to a second portion of the first membrane. A second electrode chamber may be configured to accept an opposite charge. A portion of the second electrode chamber may be coupled to a second portion of the second membrane.

Morozov, Victor (Manassas, VA)

2011-04-05T23:59:59.000Z

343

Workshop on hypersonic flow  

SciTech Connect (OSTI)

An overview is given of research activity on the application of computational fluid dynamics (CDF) for hypersonic propulsion systems. After the initial consideration of the highly integrated nature of air-breathing hypersonic engines and airframe, attention is directed toward computations carried out for the components of the engine. A generic inlet configuration is considered in order to demonstrate the highly three dimensional viscous flow behavior occurring within rectangular inlets. Reacting flow computations for simple jet injection as well as for more complex combustion chambers are then discussed in order to show the capability of viscous finite rate chemical reaction computer simulations. Finally, the nozzle flow fields are demonstrated, showing the existence of complex shear layers and shock structure in the exhaust plume. The general issues associated with code validation as well as the specific issue associated with the use of CFD for design are discussed. A prognosis for the success of CFD in the design of future propulsion systems is offered.

Povinelli, L.A.

1990-01-01T23:59:59.000Z

344

Multiphase cooling flows  

E-Print Network [OSTI]

I discuss the multiphase nature of the intracluster medium whose neglect can lead to overestimates of the baryon fraction of clusters by up to a factor of two. The multiphase form of the cooling flow equations are derived and reduced to a simple form for a wide class of self-similar density distributions. It is shown that steady-state cooling flows are \\emph{not} consistent with all possible emissivity profiles which can therefore be used as a test of the theory. In combination, they provide strong constraints on the mass distribution within the cooling radius.

Peter A. Thomas

1996-08-20T23:59:59.000Z

345

Extending the Horizons: Environmental Environmental Excellence as Key to Improving Operations.  

E-Print Network [OSTI]

of Purchasing and Materials Management. 33(3) 10-17. Newman,of Purchasing and Materials Management. 34(2) 2-11. Wolf,defined as the materials management activities needed to

Corbett, C. J.; Klassen, R. D.

2006-01-01T23:59:59.000Z

346

D0 Silicon Upgrade: Flowdyne Flow Element Information for D-Zero Upgrade  

SciTech Connect (OSTI)

This engineering note provides the information used for purchasing two venturi flowmeters and one orifice flowmeter. One venturi and one orifice performance curve is provided along with the purchasing information. Performance data is also given to supplement the performance curves.

Kuwazaki, Andrew; /Fermilab

1995-10-03T23:59:59.000Z

347

Recent Improvements in DDT  

E-Print Network [OSTI]

This paper will report new developments and recent improvements to DDT. "Window DDT" now will remember undefined symbols and define them on a later command. Using sequence breaks, it can change the contents of memory while ...

Edwards, D.J.

1963-11-01T23:59:59.000Z

348

ENERGY FLOWS CLIMATE CHANGE  

E-Print Network [OSTI]

ENERGY FLOWS FORCINGS CLIMATE CHANGE A REALLY TOUGH PROBLEM Stephen E. Schwartz, BNL, 7-20-11 www average temperature 15¬įC or 59¬įF #12;ATMOSPHERIC RADIATION Power per area Energy per time per area Unit" temperature to radiative flux. #12;GLOBAL ENERGY BALANCE Global and annual average energy fluxes in watts per

Schwartz, Stephen E.

349

Flow cytometry apparatus  

DOE Patents [OSTI]

An obstruction across the flow chamber creates a one dimensional convergence of a sheath fluid. A passageway in the construction directs flat cells near to the area of one dimensional convergence in the sheath fluid to provide proper orientation of flat cells at fast rates.

Pinkel, Daniel (Walnut Creek, CA)

1991-01-01T23:59:59.000Z

350

AGN and Cooling Flows  

E-Print Network [OSTI]

For two decades the steady-state cooling-flow model has dominated the literature of cluster and elliptical-galaxy X-ray sources. For ten years this model has been in severe difficulty from a theoretical point of view, and it is now coming under increasing pressure observationally. For two decades the steady-state cooling-flow model has dominated the literature of cluster and elliptical-galaxy X-ray sources. For ten years this model has been in severe difficulty from a theoretical point of view, and it is now coming under increasing pressure observationally. A small number of enthusiasts have argued for a radically different interpretation of the data, but had little impact on prevailing opinion because the unsteady heating picture that they advocate is extremely hard to work out in detail. Here I explain why it is difficult to extract robust observational predictions from the heating picture. Major problems include the variability of the sources, the different ways in which a bi-polar flow can impact on X-ray emission, the weakness of synchrotron emission from sub-relativistic flows, and the sensitivity of synchrotron emission to a magnetic field that is probably highly localized.

James Binney

2001-03-23T23:59:59.000Z

351

Test and evaluation of constant-flow devices for use in SSN AFFF proportioning systems. Interim report, January-May 1986  

SciTech Connect (OSTI)

Constant flow devices, which deliver a constant flow of liquid over a range of upstream and downstream pressures, have been suggested as an alternative to orifice plates for proportioning AFFF in SSN 21 fire-suppression systems. Operational and performance characteristics of two lightweight, inexpensive, commercially available constant-flow devices have significant advantages over orifice plates. Both models tested, however, showed performance degradation when subjected to simulated service conditions. A constant flow device with improved resistance to wear and to AFFF exposure is desirable. Since the constant-flow control devices tested improves proportioning efficiency but do not have optimum characteristics, investigation of improved devices or methods is recommended.

Williams, F.W.; Back, G.G.; Burns, R.E.; Quellette, R.J.; Scheffey, J.L.

1986-11-04T23:59:59.000Z

352

Conformance Improvement Using Gels  

SciTech Connect (OSTI)

This research project had two objectives. The first objective was to identify gel compositions and conditions that substantially reduce flow through fractures that allow direct channeling between wells, while leaving secondary fractures open so that high fluid injection and production rates can be maintained. The second objective was to optimize treatments in fractured production wells, where the gel must reduce permeability to water much more than that to oil.

Seright, Randall S.; Schrader, Richard; II Hagstrom, John; Wang, Ying; Al-Dahfeeri, Abdullah; Gary, Raven; Marin; Amaury; Lindquist, Brent

2002-09-26T23:59:59.000Z

353

Heat pipe with improved wick structures  

DOE Patents [OSTI]

An improved planar heat pipe wick structure having projections formed by micromachining processes. The projections form arrays of interlocking, semi-closed structures with multiple flow paths on the substrate. The projections also include overhanging caps at their tops to increase the capillary pumping action of the wick structure. The capped projections can be formed in stacked layers. Another layer of smaller, more closely spaced projections without caps can also be formed on the substrate in between the capped projections. Inexpensive materials such as Kovar can be used as substrates, and the projections can be formed by electrodepositing nickel through photoresist masks.

Benson, David A. (Albuquerque, NM); Robino, Charles V. (Albuquerque, NM); Palmer, David W. (Albuquerque, NM); Kravitz, Stanley H. (Placitas, NM)

2000-01-01T23:59:59.000Z

354

Improve Boiler System Operations- Application of Statistical Process Control  

E-Print Network [OSTI]

FOR IMPROVEMENT SURVEY CUSTOMERS2. 3. SELECT PROJECT AGREE UPON REOUREMENTS4. WITH CUSTOMERS 5. DIAGRAM PROCESS FLOW 6. ANAlYSIS OF CAUSE & EFFECT 7. DEFINE PROCESS MEASURES 8. COLLECT AND ANALYZE DATA ON MEASURES 9. NPLEMENT CORRECTIVE ACTION 10. MONTOR...

Scarr, D.; Shea, D.

355

TECHNICAL REPORTS Understanding nutrient pathways to streams will improve  

E-Print Network [OSTI]

, in most watersheds terrestrial P exports are greatest where surface waters transport P-rich soils rapTECHNICAL REPORTS 1892 Understanding nutrient pathways to streams will improve nutrient management) concentrations in several environmental compartments were examined in watersheds having a range of base flow

356

Developing a strategic roadmap for supply chain process improvement in a regulated utility  

E-Print Network [OSTI]

This thesis covers work done at Tracks Energy, a regulated utility, to develop a strategic roadmap for supply chain process improvement. The focus of Tracks Energy has always been on keeping the lights on and the gas flowing ...

Yoder, Brent E. (Brent Edward)

2013-01-01T23:59:59.000Z

357

Project Information Form Project Title Reducing Truck Emissions and Improving Truck Fuel Economy via ITS  

E-Print Network [OSTI]

Project Information Form Project Title Reducing Truck Emissions and Improving Truck Fuel Economy new traffic flow and traffic light control concepts with respect to emissions and fuel economy. Some

California at Davis, University of

358

Analysis of flow patterns and flow mechanisms in soils  

E-Print Network [OSTI]

Analysis of flow patterns and flow mechanisms in soils Dissertation Co-directed by the University of paths, varying flow mechanism or changing soil physical properties (stratification). Thus, in stratified-28Jan2010 #12;This doctoral thesis was prepared at the Department of Soil Physics, University

Paris-Sud XI, Université de

359

On the Fundamental Unsteady Fluid Dynamics of Shock-Induced Flows through Ducts  

E-Print Network [OSTI]

Unsteady shock wave propagation through ducts has many applications, ranging from blast wave shelter design to advanced high-speed propulsion systems. The research objective of this study was improved fundamental understanding of the transient flow...

Mendoza, Nicole Renee

2013-04-29T23:59:59.000Z

360

Distributed series reactance: a new approach to realize grid power flow control.  

E-Print Network [OSTI]

??The objective of the proposed research is to develop a cost-effective power flow controller to improve the utilization and reliability of the existing transmission, sub-transmission,Ö (more)

Johal, Harjeet

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "flow improvements purchasing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Nonpremixed Combustion in an Accelerating Turning Transonic Flow Undergoing Transition  

E-Print Network [OSTI]

the turbine-blade material limit. Sirignano and Liu [1,2] show by thermodynamic analysis that the thrust and to widen the range of engine operation. Because the flow in a turbine passage is accelerating and power consumption by intentionally burning fuel in the turbine stages. For the ground-based gas turbine, improvement

Liu, Feng

362

AIAA 20023642 Effect of Rotation on Flow in a  

E-Print Network [OSTI]

AIAA 2002­3642 Effect of Rotation on Flow in a Ribbed Rotating Turbine Blade Cooling Duct Model of aircraft gas turbine engines, thereby in- creasing the resulting thrust. These improvements are extremely to these advancements is the structural integrity of the gas turbine engines themselves. Cur- rently available materials

Jacob, Jamey

363

Radial flow pulse jet mixer  

DOE Patents [OSTI]

The disclosure provides a pulse jet mixing vessel for mixing a plurality of solid particles. The pulse jet mixing vessel is comprised of a sludge basin, a flow surface surrounding the sludge basin, and a downcoming flow annulus between the flow surface and an inner shroud. The pulse jet mixing vessel is additionally comprised of an upper vessel pressurization volume in fluid communication with the downcoming flow annulus, and an inner shroud surge volume separated from the downcoming flow annulus by the inner shroud. When the solid particles are resting on the sludge basin and a fluid such as water is atop the particles and extending into the downcoming flow annulus and the inner shroud surge volume, mixing occurs by pressurization of the upper vessel pressurization volume, generating an inward radial flow over the flow surface and an upwash jet at the center of the sludge basin.

VanOsdol, John G.

2013-06-25T23:59:59.000Z

364

Improving the Performance of a Two-Shell Column with Advanced Control  

E-Print Network [OSTI]

acetylene content as well as total C]'s. A deadtime compensated PID algorithm sets the target for the reboiler steam flow controller to maintain the target concentration. The steam flow is also adjusted by moves from a feedforward controller... content increased. This also allows the rectifier to run cooler. RESULTS The advanced computer control strategies have improved product quality, increased column capacity and improved energy efficiency. The composition controls maintain operations...

Morrison, T. A.; Laflamme, D.

365

The Big Flow  

E-Print Network [OSTI]

The late infall of cold dark matter onto an isolated galaxy, such as our own, produces streams and caustics in its halo. The outer caustics are topological spheres whereas the inner caustics are rings. The self-similar model of galactic halo formation predicts that the caustic ring radii $a_n$ follow the approximate law $a_n \\sim 1/n$. In a study of 32 extended and well-measured external galactic rotation curves evidence was found for this law. In the case of the Milky Way, the locations of eight sharp rises in the rotation curve fit the prediction of the self-similar model at the 3% level. Moreover, a triangular feature in the IRAS map of the galactic plane is consistent with the imprint of a ring caustic upon the baryonic matter. These observations imply that the dark matter in our neighborhood is dominated by a single flow. Estimates of that flow's density and velocity vector are given.

P. Sikivie

2001-12-04T23:59:59.000Z

366

Structural power flow measurement  

SciTech Connect (OSTI)

Previous investigations of structural power flow through beam-like structures resulted in some unexplained anomalies in the calculated data. In order to develop structural power flow measurement as a viable technique for machine tool design, the causes of these anomalies needed to be found. Once found, techniques for eliminating the errors could be developed. Error sources were found in the experimental apparatus itself as well as in the instrumentation. Although flexural waves are the carriers of power in the experimental apparatus, at some frequencies longitudinal waves were excited which were picked up by the accelerometers and altered power measurements. Errors were found in the phase and gain response of the sensors and amplifiers used for measurement. A transfer function correction technique was employed to compensate for these instrumentation errors.

Falter, K.J.; Keltie, R.F.

1988-12-01T23:59:59.000Z

367

Improving steam turbine efficiency  

SciTech Connect (OSTI)

This paper describes the condition of a significant number of fossil steam turbines operating in the United States and the maintenance practices used to improve their performance. Through the use of steam path audits conducted by the authors` company and by several utilities, a large data base of information on turbine heat rate, casing efficiency, and maintenance practices is available to help the power generation industry understand how different maintenance practices and steam path damage impact turbine performance. The data base reveals that turbine cycle heat rate is typically 5.23% poorer than design just prior to major outages. The degraded condition of steam turbines presents an opportunity for utilities to improve heat rate and reduce emissions without increasing fuel costs. The paper describes what losses typically contribute to the 5.23% heat rate degradation and how utilities can recover steam turbine performance through maintenance actions aimed at improving steam path efficiency.

Cioffi, D.H.; Mitchell, D.R.; Whitecar, S.C. [Encotech, Inc., Schenectady, NY (United States)

1995-06-01T23:59:59.000Z

368

Neutrino Factory Mercury Flow Loop  

E-Print Network [OSTI]

Neutrino Factory Mercury Flow Loop V. GravesV. Graves C. Caldwell IDS-NF Videoconference March 9, 2010 #12;Flow Loop Review · 1 cm dia nozzle, 20 m/s jet requires 1.57 liter/sec mercury flow (94 2 liter/min 24 9 gpm)mercury flow (94.2 liter/min, 24.9 gpm). · MERIT experiment showed that a pump

McDonald, Kirk

369

Orifice flow measurement uncertainty  

SciTech Connect (OSTI)

A computer program is now available from Union Carbide that evaluates the total flow uncertainty of orifice flowmeter systems. Tolerance values for every component in the system and the sensitivity of the measured flowrate to each component can be established using historical data and published hardware specifications. Knowing the tolerance and sensitivity values, a total measurement uncertainty can be estimated with a 95% confidence level. This computer program provides a powerful design tool to ensure correct component matching and total metering system optimization.

Samples, C.R.

1984-04-01T23:59:59.000Z

370

ACCELERATED IMPROVEMENT A CONCENTRATED APPROACH  

E-Print Network [OSTI]

ACCELERATED IMPROVEMENT A CONCENTRATED APPROACH FOR CONTINUOUS IMPROVEMENT #12;Accelerated.quality.wisc.edu O F F I C E O F Q U A L I T Y I M P R O V E M E N T Accelerated Improvement This guide to improving resources. You will find helpful information needed to conduct an Accelerated Improvement project

Shapiro, Vadim

371

Investigation of flow in vane-island diffusers in centrifugal compressors  

E-Print Network [OSTI]

. Meherwan P. Boyce In this thesis, both theoretical and experimental investigations of flow in a high pressure ratio centrifugal compressor vane-island diffuser, have been carried out. The flow propagation through the island diffuser and the boundary... flow angles. The separation should be avoided or delayed to improve compressor performance. Johnson and Powers [7] have looked into the effect of inlet blockage on diffuser performance. The high-pressure-ratio centrifugal compressor has narrow...

Vandijk, Hanne Nicolaas

1976-01-01T23:59:59.000Z

372

Convective heat flow probe  

DOE Patents [OSTI]

A convective heat flow probe device is provided which measures heat flow and fluid flow magnitude in the formation surrounding a borehole. The probe comprises an elongate housing adapted to be lowered down into the borehole; a plurality of heaters extending along the probe for heating the formation surrounding the borehole; a plurality of temperature sensors arranged around the periphery of the probe for measuring the temperature of the surrounding formation after heating thereof by the heater elements. The temperature sensors and heater elements are mounted in a plurality of separate heater pads which are supported by the housing and which are adapted to be radially expanded into firm engagement with the walls of the borehole. The heat supplied by the heater elements and the temperatures measured by the temperature sensors are monitored and used in providing the desired measurements. The outer peripheral surfaces of the heater pads are configured as segments of a cylinder and form a full cylinder when taken together. A plurality of temperature sensors are located on each pad so as to extend along the length and across the width thereof, with a heating element being located in each pad beneath the temperature sensors. An expansion mechanism driven by a clamping motor provides expansion and retraction of the heater pads and expandable packet-type seals are provided along the probe above and below the heater pads.

Dunn, J.C.; Hardee, H.C.; Striker, R.P.

1984-01-09T23:59:59.000Z

373

Numerical Investigations of Magnetohydrodynamic Hypersonic Flows.  

E-Print Network [OSTI]

??Numerical simulations of magnetohydrodynamic (MHD) hypersonic flow are presented for both laminar and turbulent flow over a cylinder and flow entering a scramjet inlet. ANSYSÖ (more)

Guarendi, Andrew N

2013-01-01T23:59:59.000Z

374

Tip clearance flows in axial compressors: stall inception and stability enhancement  

E-Print Network [OSTI]

The flow in the rotor tip clearance gap in an axial compressor influences the loss levels and the stall onset point. The role of tip clearance flows in the stall inception process is still debated, though. The aim of this thesis is to improve...

Weichert, Stephanie April

2012-02-07T23:59:59.000Z

375

Anthraquinone with Tailored Structure for Nonaqueous Metal-Organic Redox Flow Battery  

SciTech Connect (OSTI)

A nonaqueous, hybrid metal-organic redox flow battery based on tailored anthraquinone structure is demonstrated to have an energy efficiency of {approx}82% and a specific discharge energy density similar to aqueous redox flow batteries, which is due to the significantly improved solubility of anthraquinone in supporting electrolytes.

Wang, Wei; Xu, Wu; Cosimbescu, Lelia; Choi, Daiwon; Li, Liyu; Yang, Zhenguo

2012-06-08T23:59:59.000Z

376

BLOW UP OF SUBCRITICAL QUANTITIES AT THE FIRST SINGULAR TIME OF THE MEAN CURVATURE FLOW  

E-Print Network [OSTI]

BLOW UP OF SUBCRITICAL QUANTITIES AT THE FIRST SINGULAR TIME OF THE MEAN CURVATURE FLOW NAM Q. LE curvature flow, singularity time, blow up, subcritical quantities. 1 #12;2 NAM Q. LE develop singularities, we give a logarithmic improvement of the above results by showing that a family of subcritical

Le, Nam

377

OPTIMUM SHAPE DESIGN FOR UNSTEADY THREE-DIMENSIONAL VISCOUS FLOWS USING  

E-Print Network [OSTI]

in forward flight, turbomachinery blades and cooling fans operate in unsteady flow and are constantly subjected to unsteady loads. Optimization techniques for unsteady flows are clearly needed to improve estimates for the computational cost of a multistage compressor and turbine calculation based

Jameson, Antony

378

Wetting and free surface flow modeling for potting and encapsulation.  

SciTech Connect (OSTI)

As part of an effort to reduce costs and improve quality control in encapsulation and potting processes the Technology Initiative Project ''Defect Free Manufacturing and Assembly'' has completed a computational modeling study of flows representative of those seen in these processes. Flow solutions are obtained using a coupled, finite-element-based, numerical method based on the GOMA/ARIA suite of Sandia flow solvers. The evolution of the free surface is solved with an advanced level set algorithm. This approach incorporates novel methods for representing surface tension and wetting forces that affect the evolution of the free surface. In addition, two commercially available codes, ProCAST and MOLDFLOW, are also used on geometries representing encapsulation processes at the Kansas City Plant. Visual observations of the flow in several geometries are recorded in the laboratory and compared to the models. Wetting properties for the materials in these experiments are measured using a unique flowthrough goniometer.

Brooks, Carlton, F.; Brooks, Michael J. (Los Alamos National Laboratory, Los Alamos, NM); Graham, Alan Lyman (Los Alamos National Laboratory, Los Alamos, NM); Noble, David F. (David Frederick) (.; )); Notz, Patrick K.; Hopkins, Matthew Morgan; Castaneda, Jaime N.; Mahoney, Leo James (Kansas City Plant, Kansas City, MO); Baer, Thomas A.; Berchtold, Kathryn (Los Alamos National Laboratory, Los Alamos, NM); Adolf, Douglas Brian; Wilkes, Edward Dean; Rao, Rekha Ranjana; Givler, Richard C.; Sun, Amy Cha-Tien; Cote, Raymond O.; Mondy, Lisa Ann; Grillet, Anne Mary; Kraynik, Andrew Michael

2007-06-01T23:59:59.000Z

379

Improved vortex reactor system  

DOE Patents [OSTI]

An improved vortex reactor system for affecting fast pyrolysis of biomass and Refuse Derived Fuel (RDF) feed materials comprising: a vortex reactor having its axis vertically disposed in relation to a jet of a horizontally disposed steam ejector that impels feed materials from a feeder and solids from a recycle loop along with a motive gas into a top part of said reactor.

Diebold, James P. (Lakewood, CO); Scahill, John W. (Evergreen, CO)

1995-01-01T23:59:59.000Z

380

CAMPUS IMPROVEMENT PROGRAM 201420  

E-Print Network [OSTI]

(CIP) 2014­20? The Campus Improvement Program (CIP) is a concept proposal for the delivery of new-Darlington campus to 2020 through land uses and building envelopes. The CIP is not a proposal for the detailed design and construction of new buildings. See point 9. 2. What are the objectives of the CIP? The CIP

Viglas, Anastasios

Note: This page contains sample records for the topic "flow improvements purchasing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Soldering instrument safety improvements  

DOE Patents [OSTI]

A safe soldering device includes a retractable heat shield which can be moved between a first position in which the solder tip of the device is exposed for soldering operation and a second position in which the solder tip is covered by the heat shield. Preferably, the heat shield is biased towards the second position and may be locked in the first position for ease of use. When the soldering device is equipped with a vacuum system, the heat shield may serve to guide the flow of gases and heat from the solder tip away from the work area. The heat shield is preferably made of non-heatsinking plastic.

Kosslow, William J. (Jefferson Boro, PA); Giron, Ronald W. (Delmont, PA)

1996-01-01T23:59:59.000Z

382

Dell recommends Windows. All are subject to approval acceptance by Dell. Offers subject to change, not combinable with all other offers. Taxes, shipping, handling and other fees apply. Valid for U.S. Dell Member Purchase Program/Dell University new purcha  

E-Print Network [OSTI]

Purchase Program/Dell University new purchases only. Dell reserves the right to cancel orders arising from means 1 billion bytes and TB means 1 trillion bytes; actual capacity varies with preloaded material balance or $20, whichever is greater. Minimum Interest Charge is $2.00. Rates range from 19.99% - 29

Derisi, Joseph

383

Numerical simulation of laminar flow in a curved duct  

SciTech Connect (OSTI)

This paper describes numerical simulations that were performed to study laminar flow through a square duct with a 900 bend. The purpose of this work was two fold. First, an improved understanding was desired of the flow physics involved in the generation of secondary vortical flows in three-dimensions. Second, adaptive gridding techniques for structured grids in three- dimensions were investigated for the purpose of determining their utility in low Reynolds number, incompressible flows. It was also of interest to validate the commercial computer code CFD-ACE. Velocity predictions for both non-adaptive and adaptive grids are compared with experimental data. Flow visualization was used to examine the characteristics of the flow though the curved duct in order to better understand the viscous flow physics of this problem. Generally, moderate agreement with the experimental data was found but shortcomings in the experiment were demonstrated. The adaptive grids did not produce the same level of accuracy as the non-adaptive grid with a factor of four more grid points.

Lopez, A.R.; Oberkampf, W.L.

1995-01-01T23:59:59.000Z

384

Some parametric flow analyses of a particle bed fuel element  

SciTech Connect (OSTI)

Parametric calculations are performed, using the SAFSIM computer program, to investigate the fluid mechanics and heat transfer performance of a particle bed fuel element. Both steady-state and transient calculations are included, addressing such issues as flow stability, reduced thrust operation, transpiration drag, coolant conductivity enhancement, flow maldistributions, decay heat removal, flow perturbations, and pulse cooling. The calculations demonstrate the dependence of the predicted results on the modeling assumptions and thus provide guidance as to where further experimental and computational investigations are needed. The calculations also demonstrate that both flow instability and flow maldistribution in the fuel element are important phenomena. Furthermore, results are encouraging that geometric design changes to the element can significantly reduce problems related to these phenomena, allowing improved performance over a wide range of element power densities and flow rates. Such design changes will help to maximize the operational efficiency of space propulsion reactors employing particle bed fuel element technology. Finally, the results demonstrate that SAFSIM is a valuable engineering tool for performing quick and inexpensive parametric simulations addressing complex flow problems.

Dobranich, D.

1993-05-01T23:59:59.000Z

385

UZ Flow Models and Submodels  

SciTech Connect (OSTI)

The purpose of this report is to document the unsaturated zone (UZ) flow models and submodels, as well as the flow fields that have been generated using the UZ flow model(s) of Yucca Mountain, Nevada. In this report, the term ''UZ model'' refers to the UZ flow model and the several submodels, which include tracer transport, temperature or ambient geothermal, pneumatic or gas flow, and geochemistry (chloride, calcite, and strontium) submodels. The term UZ flow model refers to the three-dimensional models used for calibration and simulation of UZ flow fields. This work was planned in the ''Technical Work Plan (TWP) for: Unsaturated Zone Flow Analysis and Model Report Integration'' (BSC 2004 [DIRS 169654], Section 1.2.7). The table of included Features, Events, and Processes (FEPs), Table 6.2-11, is different from the list of included FEPs assigned to this report in the ''Technical Work Plan for: Unsaturated Zone Flow Analysis and Model Report Integration'' (BSC 2004 [DIRS 169654], Table 2.1.5-1), as discussed in Section 6.2.6. The UZ model has revised, updated, and enhanced the previous UZ model (BSC 2001 [DIRS 158726]) by incorporating the repository design with new grids, recalibration of property sets, and more comprehensive validation effort. The flow fields describe fracture-fracture, matrix-matrix, and fracture-matrix liquid flow rates, and their spatial distributions as well as moisture conditions in the UZ system. These three-dimensional UZ flow fields are used directly by Total System Performance Assessment (TSPA). The model and submodels evaluate important hydrogeologic processes in the UZ as well as geochemistry and geothermal conditions. These provide the necessary framework to test hypotheses of flow and transport at different scales, and predict flow and transport behavior under a variety of climatic conditions. In addition, the limitations of the UZ model are discussed in Section 8.11.

Y. Wu

2004-11-01T23:59:59.000Z

386

Solids flow rate measurement in dense slurries  

SciTech Connect (OSTI)

Accurate and rapid flow rate measurement of solids in dense slurries remains an unsolved technical problem, with important industrial applications in chemical processing plants and long-distance solids conveyance. In a hostile two-phase medium, such a measurement calls for two independent parameter determinations, both by non-intrusive means. Typically, dense slurries tend to flow in laminar, non-Newtonian mode, eliminating most conventional means that usually rely on calibration (which becomes more difficult and costly for high pressure and temperature media). These issues are reviewed, and specific solutions are recommended in this report. Detailed calculations that lead to improved measuring device designs are presented for both bulk density and average velocity measurements. Cross-correlation, chosen here for the latter task, has long been too inaccurate for practical applications. The cause and the cure of this deficiency are discussed using theory-supported modeling. Fluid Mechanics are used to develop the velocity profiles of laminar non-Newtonian flow in a rectangular duct. This geometry uniquely allows the design of highly accurate `capacitive` devices and also lends itself to gamma transmission densitometry on an absolute basis. An absolute readout, though of less accuracy, is also available from a capacitive densitometer and a pair of capacitive sensors yields signals suitable for cross-correlation velocity measurement.

Porges, K.G.; Doss, E.D.

1993-09-01T23:59:59.000Z

387

An evaluation of pressure and flow measurement in the Molten Salt Test Loop (MSTL) system.  

SciTech Connect (OSTI)

The National Solar Thermal Test Facility at Sandia National Laboratories has a unique test capability called the Molten Salt Test Loop (MSTL) system. MSTL allows customers and researchers to test components in flowing, molten nitrate salt at plant-like conditions for pressure, flow, and temperature. An important need in thermal storage systems that utilize molten salts is for accurate flow and pressure measurement at temperatures above 535%C2%B0C. Currently available flow and pressure instrumentation for molten salt is limited to 535%C2%B0C and even at this temperature the pressure measurement appears to have significant variability. It is the design practice in current Concentrating Solar Power plants to measure flow and pressure on the cold side of the process or in dead-legs where the salt can cool, but this practice won't be possible for high temperature salt systems. For this effort, a set of tests was conducted to evaluate the use of the pressure sensors for flow measurement across a device of known flow coefficient Cv. To perform this task, the pressure sensors performance was evaluated and was found to be lacking. The pressure indicators are severely affected by ambient conditions and were indicating pressure changes of nearly 200psi when there was no flow or pressure in the system. Several iterations of performance improvement were undertaken and the pressure changes were reduced to less than 15psi. The results of these pressure improvements were then tested for use as flow measurement. It was found that even with improved pressure sensors, this is not a reliable method of flow measurement. The need for improved flow and pressure measurement at high temperatures remains and will need to be solved before it will be possible to move to high temperature thermal storage systems with molten salts.

Gill, David Dennis; Kolb, William J.; Briggs, Ronald J.

2013-07-01T23:59:59.000Z

388

Improved solar heating systems  

DOE Patents [OSTI]

An improved solar heating system is described in which the incident radiation of the sun is absorbed on collector panels, transferred to a storage unit and then distributed as heat for a building and the like. The improvement is obtained by utilizing a storage unit comprising separate compartments containing an array of materials having different melting points ranging from 75 to 180/sup 0/F. The materials in the storage system are melted in accordance with the amount of heat absorbed from the sun and then transferred to the storage system. An efficient low volume storage system is provided by utilizing the latent heat of fusion of the materials as they change states in storing ad releasing heat for distribution.

Schreyer, J.M.; Dorsey, G.F.

1980-05-16T23:59:59.000Z

389

Improved vortex reactor system  

DOE Patents [OSTI]

An improved vortex reactor system is described for affecting fast pyrolysis of biomass and Refuse Derived Fuel (RDF) feed materials comprising: a vortex reactor having its axis vertically disposed in relation to a jet of a horizontally disposed steam ejector that impels feed materials from a feeder and solids from a recycle loop along with a motive gas into a top part of said reactor. 12 figs.

Diebold, J.P.; Scahill, J.W.

1995-05-09T23:59:59.000Z

390

Improving haul truck productivity  

SciTech Connect (OSTI)

The paper reviews developments in payload management and cycle times. These were discussed at a roundtable held at the Haulage and Loading 2007 conference held in May in Phoenix, AZ, USA. Several original equipment manufacturers (OEMs) explaind what their companies were doing to improve cycle times for trucks, shovels and excavators used in surface coal mining. Quotations are given from Dion Domaschenz of Liebherr and Steve Plott of Cat Global Mining. 4 figs.

Fiscor, S.

2007-06-15T23:59:59.000Z

391

Improving biofuel production | EMSL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickrinformation for planning experimental workImproving Reusebiofuel

392

Improving catalysts | EMSL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickrinformation for planning experimental workImproving

393

Infrastructure Improvements - SRSCRO  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickrinformation for planningtoAInfrastructure Improvements As the

394

Apparatus for passive removal of subsurface contaminants and mass flow measurement  

DOE Patents [OSTI]

A system for improving the Baroball valve and a method for retrofitting an existing Baroball valve. This invention improves upon the Baroball valve by reshaping the interior chamber of the valve to form a flow meter measuring chamber. The Baroball valve sealing mechanism acts as a rotameter bob for determining mass flow rate through the Baroball valve. A method for retrofitting a Baroball valve includes providing static pressure ports and connecting a measuring device, to these ports, for measuring the pressure differential between the Baroball chamber and the well. A standard curve of nominal device measurements allows the mass flow rate to be determined through the retrofitted Baroball valve.

Jackson, Dennis G. (Augusta, GA); Rossabi, Joseph (Aiken, SC); Riha, Brian D. (Augusta, GA)

2003-07-15T23:59:59.000Z

395

Apparatus for passive removal of subsurface contaminants and volume flow measurement  

DOE Patents [OSTI]

A system for improving the Baroball valve and a method for retrofitting an existing Baroball valve. This invention improves upon the Baroball valve by reshaping the interior chamber of the valve to form a flow meter measuring chamber. The Baroball valve sealing mechanism acts as a rotameter bob for determining volume flow rate through the Baroball valve. A method for retrofitting a Baroball valve includes providing static pressure ports and connecting a measuring device, to these ports, for measuring the pressure differential between the Baroball chamber and the well. A standard curve of nominal device measurements allows the volume flow rate to be determined through the retrofitted Baroball valve.

Jackson, Dennis G. (Augusta, GA); Rossabi, Joseph (Aiken, SC); Riha, Brian D. (Augusta, GA)

2002-01-01T23:59:59.000Z

396

Fluid flow monitoring device  

DOE Patents [OSTI]

A flow meter and temperature measuring device are described comprising a tube with a body centered therein for restricting flow and a sleeve at the upper end of the tube to carry several channels formed longitudinally in the sleeve to the appropriate axial location where they penetrate the tube to allow pressure measurements and temperature measurements with thermocouples. The high pressure measurement is made using a channel penetrating the tube away from the body and the low pressure measurement is made at a location at the widest part of the body. An end plug seals the end of the device and holes at its upper end allow fluid to pass from the interior of the tube into a plenum. The channels are made by cutting grooves in the sleeve, the grooves widened at the surface of the sleeve and then a strip of sleeve material is welded to the grooves closing the channels. Preferably the sleeve is packed with powdered graphite before cutting the grooves and welding the strips. 7 figures.

McKay, M.D.; Sweeney, C.E.; Spangler, B.S. Jr.

1993-11-30T23:59:59.000Z

397

Fluid flow monitoring device  

DOE Patents [OSTI]

A flow meter and temperature measuring device comprising a tube with a body centered therein for restricting flow and a sleeve at the upper end of the tube to carry several channels formed longitudinally in the sleeve to the appropriate axial location where they penetrate the tube to allow pressure measurements and temperature measurements with thermocouples. The high pressure measurement is made using a channel penetrating the tube away from the body and the low pressure measurement is made at a location at the widest part of the body. An end plug seals the end of the device and holes at its upper end allow fluid to pass from the interior of the tube into a plenum. The channels are made by cutting grooves in the sleeve, the grooves widened at the surface of the sleeve and then a strip of sleeve material is welded to the grooves closing the channels. Preferably the sleeve is packed with powdered graphite before cutting the grooves and welding the strips.

McKay, Mark D. (1426 Socastee Dr., North Augusta, SC 29841); Sweeney, Chad E. (3600 Westhampton Dr., Martinez, GA 30907-3036); Spangler, Jr., B. Samuel (2715 Margate Dr., Augusta, GA 30909)

1993-01-01T23:59:59.000Z

398

Radial flow heat exchanger  

DOE Patents [OSTI]

A radial flow heat exchanger (20) having a plurality of first passages (24) for transporting a first fluid (25) and a plurality of second passages (26) for transporting a second fluid (27). The first and second passages are arranged in stacked, alternating relationship, are separated from one another by relatively thin plates (30) and (32), and surround a central axis (22). The thickness of the first and second passages are selected so that the first and second fluids, respectively, are transported with laminar flow through the passages. To enhance thermal energy transfer between first and second passages, the latter are arranged so each first passage is in thermal communication with an associated second passage along substantially its entire length, and vice versa with respect to the second passages. The heat exchangers may be stacked to achieve a modular heat exchange assembly (300). Certain heat exchangers in the assembly may be designed slightly differently than other heat exchangers to address changes in fluid properties during transport through the heat exchanger, so as to enhance overall thermal effectiveness of the assembly.

Valenzuela, Javier (Hanover, NH)

2001-01-01T23:59:59.000Z

399

Annular flow diverter valve  

DOE Patents [OSTI]

A valve for diverting flow from the center of two concentric tubes to the annulus between the tubes or, operating in the reverse direction, for mixing fluids from concentric tubes into a common tube and for controlling the volume ratio of said flow consists of a toroidal baffle disposed in sliding engagement with the interior of the inner tube downstream of a plurality of ports in the inner tube, a plurality of gates in sliding engagement with the interior of the inner tube attached to the baffle for movement therewith, a servomotor having a bullet-shaped plug on the downstream end thereof, and drive rods connecting the servomotor to the toroidal baffle, the servomotor thereby being adapted to move the baffle into mating engagement with the bullet-shaped plug and simultaneously move the gates away from the ports in the inner tube and to move the baffle away from the bullet-shaped plug and simultaneously move the gates to cover the ports in the inner tube.

Rider, Robert L. (Walkersville, MD)

1980-01-01T23:59:59.000Z

400

Track 10: Feedback and Improvement  

Broader source: Energy.gov [DOE]

ISM Workshop Presentations Knoxville Convention Center, Knoxville, TN August 2009 Track 10: Feedback and Improvement

Note: This page contains sample records for the topic "flow improvements purchasing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Method and system for measuring multiphase flow using multiple pressure differentials  

DOE Patents [OSTI]

An improved method and system for measuring a multiphase flow in a pressure flow meter. An extended throat venturi is used and pressure of the multiphase flow is measured at three or more positions in the venturi, which define two or more pressure differentials in the flow conduit. The differential pressures are then used to calculate the mass flow of the gas phase, the total mass flow, and the liquid phase. The method for determining the mass flow of the high void fraction fluid flow and the gas flow includes certain steps. The first step is calculating a gas density for the gas flow. The next two steps are finding a normalized gas mass flow rate through the venturi and computing a gas mass flow rate. The following step is estimating the gas velocity in the venturi tube throat. The next step is calculating the pressure drop experienced by the gas-phase due to work performed by the gas phase in accelerating the liquid phase between the upstream pressure measuring point and the pressure measuring point in the venturi throat. Another step is estimating the liquid velocity in the venturi throat using the calculated pressure drop experienced by the gas-phase due to work performed by the gas phase. Then the friction is computed between the liquid phase and a wall in the venturi tube. Finally, the total mass flow rate based on measured pressure in the venturi throat is calculated, and the mass flow rate of the liquid phase is calculated from the difference of the total mass flow rate and the gas mass flow rate.

Fincke, James R. (Idaho Falls, ID)

2001-01-01T23:59:59.000Z

402

Active combustion flow modulation valve  

DOE Patents [OSTI]

A flow modulation valve has a slidably translating hollow armature with at least one energizable coil wound around and fixably attached to the hollow armature. The energizable coil or coils are influenced by at least one permanent magnet surrounding the hollow armature and supported by an outer casing. Lorentz forces on the energizable coils which are translated to the hollow armature, increase or decrease the flow area to provide flow throttling action. The extent of hollow armature translation depends on the value of current supplied and the direction of translation depends on the direction of current flow. The compact nature of the flow modulation valve combined with the high forces afforded by the actuator design provide a flow modulation valve which is highly responsive to high-rate input control signals.

Hensel, John Peter; Black, Nathaniel; Thorton, Jimmy Dean; Vipperman, Jeffrey Stuart; Lambeth, David N; Clark, William W

2013-09-24T23:59:59.000Z

403

Power Flow Analysis Algorithm for Islanded LV Microgrids Including Distributed Generator Units with  

E-Print Network [OSTI]

of virtual impedance parameters and (ii) higher accuracy in reactive power flow calculation. The improved With larger portion of growing electricity demand which is being fed through distributed generation (DG, in order to decouple real and reactive power, to increase the stability margin and also to improve

Chaudhary, Sanjay

404

Differential probes aid flow measurement  

SciTech Connect (OSTI)

Nonconstricting differential pressure flow probes which help solve the problems of clogging, wear, and pressure loss at the Seawater Filtration Facility in Saudi Arabia are described. Treated seawater is pumped into oil-bearing formations for secondary recovery. Figures showing principle of operation for probes, installation schematic and long-term accuracy results (flow probes vs. orifice meters) are presented. The new diamond-shaped design flow sensor offers accurate flow measurement with low permanent pressure loss, which translates into cost savings for the operator.

Mesnard, D.R.

1982-07-01T23:59:59.000Z

405

On the efficient detection of elephant flows in aggregated network traffic Javier Rivillo, Jose-Alberto Hernandez and Iain W. Phillips  

E-Print Network [OSTI]

On the efficient detection of elephant flows in aggregated network traffic Javier Rivillo, Jos, where usually a few flows carry most of the data. This is commonly refered to as "elephant and mice phenomenon". The performance of the network can be improved detecting the elephant flows and applying traffic

Haddadi, Hamed

406

Increased Availability From Improved Condenser Design  

SciTech Connect (OSTI)

Performance parameters and flow characteristics on the shell side of surface condensers are becoming better understood. Contributing to this knowledge base is the recent ability to measure the physical properties as well as the quantity of gases being removed from the condenser by air removal equipment. Reviewed here are the commonality of these data from many operating condensers obtained over the past six years and other known condenser measurements, theory and laboratory experiments. These are combined to formulate global theoretical description of condenser dynamics describing the mechanism responsible for aeration and de-aeration, excess back pressure buildup due to air ingress or generation of other noncondensable gases, and the dissolubility of corrosive gases in condensate. The theoretical description supports a dynamic model useful for deciding condenser configuration design and design improvements. Features of design found in many operating condensers that promote aeration and resulting corrosion are presented. The benefits of the model and engineering design modifications to plant life cycle management, improved condenser performance, outage reduction and reliability improvements, lost load recovery and fuel savings are discussed. (author)

Harpster, Joseph W. [Intek, Inc., 751 Intek Way, Westerville, OH 43082 (United States)

2002-07-01T23:59:59.000Z

407

Improved supplier selection and cost management for globalized automotive production  

E-Print Network [OSTI]

For many manufacturing and automotive companies, traditional sourcing decisions rely on total landed cost models to determine the cheapest supplier. Total landed cost models calculate the cost to purchase a part plus all ...

Franken, Joseph P., II (Joseph Philip)

2012-01-01T23:59:59.000Z

408

Section 11: Interfacial flows 1 Section 11: Interfacial flows  

E-Print Network [OSTI]

Abstract 15:10 ¬≠ 15:30: Martin L√ľbke, Olaf W√ľnsch (Universit√§t Kassel): Two-Phase Flow in Single- Screw Extruders Abstract S11.4: Capillary Flows Wed, 16:00¬≠18:00 Chair: Dieter Bothe S1|03¬≠123 16:00 ¬≠ 16:20: K

Kohlenbach, Ulrich

409

Analysis of flow patterns and flow mechanisms in soils  

E-Print Network [OSTI]

Analysis of flow patterns and flow mechanisms in soils Dissertation Co-directed by the University mechanism or changing soil physical properties (stratification). Thus, in stratified soil, we restricted was prepared at the Department of Soil Physics, University of Bayreuth, and at the Hydrogeological Laboratory

Avignon et des Pays de Vaucluse, Université de

410

Membranes and separators for flowing electrolyte batteries-a review  

SciTech Connect (OSTI)

Flowing electrolyte batteries are rechargeable electrochemical storage devices in which externally stored electrolytes are circulated through the cell stack during charge or discharge. The potential advantages that flow batteries offer compared to other secondary batteries include: 1) ease of thermal and electrolyte management, 2) simple electrochemistry, 3) deep cycling capability, and 4) minimal loss of capacity with cycling. However, flow batteries are more complex than other secondary batteries and consequently may cost more and may be less reliable. Flow batteries are being developed for utility load leveling, electric vehicles, solar photovoltaic and wind turbine application. The status of flow batteries has recently been reviewed by Clark et al. The flowing electrolyte batteries place rigorous demands on the performance of separators and membranes. The operating characteristics of the iron/chromium redox battery were changed in order to accommodate the limitations in membrane performance. Low cost alternatives to the presently used membrane must be found before the zinc/ferricyanide battery can be economically feasible. The zinc/bromine battery's efficiency could be improved if a suitably selective membrane were available. It is anticipated that better and less costly membranes to meet these needs will be developed as more is learned about their preparation and performance.

Arnold, C.; Assink, R.A.

1983-01-01T23:59:59.000Z

411

Effect of flow fluctuations and nonflow on elliptic flow methods  

SciTech Connect (OSTI)

We discuss how the different estimates of elliptic flow are influenced by flow fluctuations and nonflow effects. It is explained why the event-plane method yields estimates between the two-particle correlation methods and the multiparticle correlation methods. It is argued that nonflow effects and fluctuations cannot be disentangled without other assumptions. However, we provide equations where, with reasonable assumptions about fluctuations and nonflow, all measured values of elliptic flow converge to a unique mean v_2,PP elliptic flow in the participant plane and, with a Gaussian assumption on eccentricity fluctuations, can be converted to the mean v_2,RP in the reaction plane. Thus, the 20percent spread in observed elliptic flow measurements from different analysis methods is no longer mysterious.

Ollitrault, Jean-Yves; Poskanzer, Arthur M.; Voloshin, Sergei A.

2009-04-16T23:59:59.000Z

412

Lake Improvement District Law and County Lake Improvement Program (Minnesota)  

Broader source: Energy.gov [DOE]

Lake Improvement Districts may be established by county boards in order to ďimprove the quality of water in lakes; provide for reasonable assurance of water quantity in lakes, where feasible and...

413

Nonlinear dynamics in flow through unsaturated fractured-porous media: Status and perspectives  

SciTech Connect (OSTI)

The need has long been recognized to improve predictions of flow and transport in partially saturated heterogeneous soils and fractured rock of the vadose zone for many practical applications, such as remediation of contaminated sites, nuclear waste disposal in geological formations, and climate predictions. Until recently, flow and transport processes in heterogeneous subsurface media with oscillating irregularities were assumed to be random and were not analyzed using methods of nonlinear dynamics. The goals of this paper are to review the theoretical concepts, present the results, and provide perspectives on investigations of flow and transport in unsaturated heterogeneous soils and fractured rock, using the methods of nonlinear dynamics and deterministic chaos. The results of laboratory and field investigations indicate that the nonlinear dynamics of flow and transport processes in unsaturated soils and fractured rocks arise from the dynamic feedback and competition between various nonlinear physical processes along with complex geometry of flow paths. Although direct measurements of variables characterizing the individual flow processes are not technically feasible, their cumulative effect can be characterized by analyzing time series data using the models and methods of nonlinear dynamics and chaos. Identifying flow through soil or rock as a nonlinear dynamical system is important for developing appropriate short- and long-time predictive models, evaluating prediction uncertainty, assessing the spatial distribution of flow characteristics from time series data, and improving chemical transport simulations. Inferring the nature of flow processes through the methods of nonlinear dynamics could become widely used in different areas of the earth sciences.

Faybishenko, Boris

2002-11-27T23:59:59.000Z

414

Fuel cell plates with improved arrangement of process channels for enhanced pressure drop across the plates  

DOE Patents [OSTI]

A plate for a fuel cell has an arrangement of ribs defining an improved configuration of process gas channels and slots on a surface of the plate which provide a modified serpentine gas flow pattern across the plate surface. The channels are generally linear and arranged parallel to one another while the spaced slots allow cross channel flow of process gas in a staggered fashion which creates a plurality of generally mini-serpentine flow paths extending transverse to the longitudinal gas flow along the channels. Adjacent pairs of the channels are interconnected to one another in flow communication. Also, a bipolar plate has the aforementioned process gas channel configuration on one surface and another configuration on the opposite surface. In the other configuration, there are not slots and the gas flow channels have a generally serpentine configuration.

Spurrier, Francis R. (Whitehall Boro, PA); Pierce, Bill L. (Whitehall Boro, PA); Wright, Maynard K. (Bethel Park, PA)

1986-01-01T23:59:59.000Z

415

Network Flow Optimization under Uncertainty  

E-Print Network [OSTI]

Network model in words Minimize the cost of satisfying demands for electric energy By: imports, exports and electricity Subject to: conservation of energy flows (net after losses), lower and upper bounds on flows is a reactive approach: how would the optimal solution have changed if I'd only known? · Proactive approaches

Tesfatsion, Leigh

416

Redox Flow Batteries, a Review  

SciTech Connect (OSTI)

Redox flow batteries are enjoying a renaissance due to their ability to store large amounts of electrical energy relatively cheaply and efficiently. In this review, we examine the components of redox flow batteries with a focus on understanding the underlying physical processes. The various transport and kinetic phenomena are discussed along with the most common redox couples.

U. Tennessee Knoxville; U. Texas Austin; McGill U; Weber, Adam Z.; Mench, Matthew M.; Meyers, Jeremy P.; Ross, Philip N.; Gostick, Jeffrey T.; Liu, Qinghua

2011-07-15T23:59:59.000Z

417

Improved Lattice Radial Quantization  

E-Print Network [OSTI]

Lattice radial quantization was proposed in a recent paper by Brower, Fleming and Neuberger[1] as a nonperturbative method especially suited to numerically solve Euclidean conformal field theories. The lessons learned from the lattice radial quantization of the 3D Ising model on a longitudinal cylinder with 2D Icosahedral cross-section suggested the need for an improved discretization. We consider here the use of the Finite Element Methods(FEM) to descretize the universally-equivalent $\\phi^4$ Lagrangian on $\\mathbb R \\times \\mathbb S^2$. It is argued that this lattice regularization will approach the exact conformal theory at the Wilson-Fisher fixed point in the continuum. Numerical tests are underway to support this conjecture.

Richard C. Brower; Michael Cheng; George T. Fleming

2014-07-28T23:59:59.000Z

418

Regulatory Streamlining and Improvement  

SciTech Connect (OSTI)

The Interstate Oil and Gas Compact Commission (IOGCC) engaged in numerous projects outlined under the scope of work discussed in the United States Department of Energy (DOE) grant number DE-FC26-04NT15456 awarded to the IOGCC. Numerous projects were completed that were extremely valuable to state oil and gas agencies as a result of work performed utilizing resources provided by the grant. There are numerous areas in which state agencies still need assistance. This additional assistance will need to be addressed under future scopes of work submitted annually to DOE's Project Officer for this grant. This report discusses the progress of the projects outlined under the grant scope of work for the 2005-2006 areas of interest, which are as follows: Area of Interest No. 1--Regulatory Streamlining and Improvement: This area of interest continues to support IOGCC's regulatory streamlining efforts that include the identification and elimination of unnecessary duplications of efforts between and among state and federal programs dealing with exploration and production on public lands. Area of Interest No. 2--Technology: This area of interest seeks to improve efficiency in states through the identification of technologies that can reduce costs. Area of Interest No. 3--Training and Education: This area of interest is vital to upgrading the skills of regulators and industry alike. Within the National Energy Policy, there are many appropriate training and education opportunities. Education was strongly endorsed by the President's National Energy Policy Development group. Acting through the governors offices, states are very effective conduits for the dissemination of energy education information. While the IOGCC favors the development of a comprehensive, long-term energy education plan, states are also supportive of immediate action on important concerns, such as energy prices, availability and conservation. Area of Interest No. 4--Resource Assessment and Development: This area of interest relates directly to helping maximize production of domestic oil and natural gas resources, including areas that are under explored or have not been adequately defined.

Mark A. Carl

2006-07-11T23:59:59.000Z

419

Vertical flow chemical detection portal  

DOE Patents [OSTI]

A portal apparatus is described for screening objects or persons for the presence of trace amounts of chemical substances such as illicit drugs or explosives. The apparatus has a test space, in which a person may stand, defined by two generally upright sides spanned by a horizontal transom. One or more fans in the transom generate a downward air flow (uni-directional) within the test space. The air flows downwardly from a high pressure upper zone, past the object or person to be screened. Air moving past the object dislodges from the surface thereof both volatile and nonvolatile particles of the target substance. The particles are entrained into the air flow which continues flowing downward to a lower zone of reduced pressure, where the particle-bearing air stream is directed out of the test space and toward preconcentrator and detection components. The sides of the portal are specially configured to partially contain and maintain the air flow. 3 figs.

Linker, K.L.; Hannum, D.W.; Conrad, F.J.

1999-06-22T23:59:59.000Z

420

Roadway Improvement Project Cost Allocation  

E-Print Network [OSTI]

Roadway Improvement Project Cost Allocation CTS 21st Annual Transportation Research Conference costs #12;Potential Applications · Roadway Project Feasibility Studies ­ Identified potential roadway infrastructure improvement ­ Documentation of estimated project costs ­ Determine property assessments

Minnesota, University of

Note: This page contains sample records for the topic "flow improvements purchasing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Installation of a Low Flow Unit at the Abiquiu Hydroelectric Facility  

SciTech Connect (OSTI)

Final Technical Report for the Recovery Act Project for the Installation of a Low Flow Unit at the Abiquiu Hydroelectric Facility. The Abiquiu hydroelectric facility existed with two each 6.9 MW vertical flow Francis turbine-generators. This project installed a new 3.1 MW horizontal flow low flow turbine-generator. The total plant flow range to capture energy and generate power increased from between 250 and 1,300 cfs to between 75 and 1,550 cfs. Fifty full time equivalent (FTE) construction jobs were created for this project - 50% (or 25 FTE) were credited to ARRA funding due to the ARRA 50% project cost match. The Abiquiu facility has increased capacity, increased efficiency and provides for an improved aquatic environment owing to installed dissolved oxygen capabilities during traditional low flow periods in the Rio Chama. A new powerhouse addition was constructed to house the new turbine-generator equipment.

Jack Q. Richardson

2012-06-28T23:59:59.000Z

422

Computations of high-pressure steam flow in the turbine bypass valve  

SciTech Connect (OSTI)

The objective of the present study is to investigate the steam flow behavior through the high-pressure turbine bypass valve. Efforts have mainly been directed at investigating the process of steam flow and property variations aforementioned bypass valve as well as to obtain correlations between the flow rate and the valve opening ratio. Modeling of the high-pressure turbulent steam flow was performed on a three-dimensional non-staggered grid system by employing the finite volume method and by solving the three-dimensional, turbulent, compressible Navier-Stokes, and energy equations. Through this research, numerous data have been acquired and analyzed. These efforts enable one to obtain a correlation data set for the valve opening versus flow rate coefficient of the valve. One of the significant accomplishments is to use the model presented here to further improve a design of a turbine bypass flow valve.

Amano, R.S.; Draxler, G.R.

1999-07-01T23:59:59.000Z

423

Wavy flow cooling concept for turbine airfoils  

DOE Patents [OSTI]

An airfoil including an outer wall and a cooling cavity formed therein. The cooling cavity includes a leading edge flow channel located adjacent a leading edge of the airfoil and a trailing edge flow channel located adjacent a trailing edge of the airfoil. Each of the leading edge and trailing edge flow channels define respective first and second flow axes located between pressure and suction sides of the airfoil. A plurality of rib members are located within each of the flow channels, spaced along the flow axes, and alternately extending from opposing sides of the flow channels to define undulating flow paths through the flow channels.

Liang, George (Palm City, FL)

2010-08-31T23:59:59.000Z

424

Quantifying improvements in the Engineering-Procurement-Construction (EPC) process from the implementation of information management strategies within materials management  

E-Print Network [OSTI]

Throughout all industries where material flow or handling is involved, employers have implemented various information management technologies with the following goals: 1) to reduce cost, time, and effort, 2) to improve productivity, 3) to streamline...

Toon, Jeffrey Lee

1997-01-01T23:59:59.000Z

425

Redox flow batteries based on supporting solutions containing chloride  

DOE Patents [OSTI]

Redox flow battery systems having a supporting solution that contains Cl.sup.- ions can exhibit improved performance and characteristics. Furthermore, a supporting solution having mixed SO.sub.4.sup.2- and Cl.sup.- ions can provide increased energy density and improved stability and solubility of one or more of the ionic species in the catholyte and/or anolyte. According to one example, a vanadium-based redox flow battery system is characterized by an anolyte having V.sup.2+ and V.sup.3+ in a supporting solution and a catholyte having V.sup.4+ and V.sup.5+ in a supporting solution. The supporting solution can contain Cl.sup.- ions or a mixture of SO.sub.4.sup.2- and Cl.sup.- ions.

Li, Liyu; Kim, Soowhan; Yang, Zhenguo; Wang, Wei; Zhang, Jianlu; Chen, Baowei; Nie, Zimin; Xia, Guanguang

2014-01-14T23:59:59.000Z

426

Molten carbonate fuel cell technology improvement  

SciTech Connect (OSTI)

This report summarizes the work performed under Department of Energy Contract DEAC21-87MC23270, Molten Carbonate Fuel Cell Technology Improvement.'' This work was conducted over a three year period and consisted of three major efforts. The first major effort was the power plant system study which reviewed the competitive requirements for a coal gasifier/molten carbonate fuel cell power plant, produced a conceptual design of a CG/MCFC, and defined the technology development requirements. This effort is discussed in Section 1 of the report. The second major effort involved the design and development of a new MCFC cell configuration which reduced the material content of the cell to a level competitive with competing power plants, simplified the cell configuration to make the components more manufacturable and adaptable to continuous low cost processing techniques, and introduced new-low-pressure drop flow fields for both reactant gases. The new flow fields permitted the incorporation of recirculation systems in both reactant gas systems, permitting simplified cooling techniques and the ability to operate on both natural gas and a wide variety of gasifier fuels. This cell technology improvement is discussed in Section 2. The third major effort involved the scaleup of the new cell configuration to the full-area, 8-sq-ft size and resulted in components used for a 25-kW, 20-cell stack verification test. The verification test was completed with a run of 2200 hours, exceeding the goal of 2000 hours and verifying the new cell design. TWs test, in turn, provided the confidence to proceed to a 100-kW demonstration which is the goal of the subsequent DOE program. The scaleup and stack verification tests are discussed in Sections 3, 4, 5, and 6 of this report.

Not Available

1991-06-01T23:59:59.000Z

427

A shallow water model for the numerical simulation of overland flow on surfaces with ridges and furrows  

E-Print Network [OSTI]

induces problems at watershed scale for soil conservation (decrease of soil thickness by erosion, nutrient (drinking water) and sustainability of aquatic ecosystems (chemical pollution). These troubles can be prevented by watershed management. Improving watershed management in relationships with overland flow

428

Experimental analysis of the vorticity and turbulent flow dynamics of a pitching airfoil at realistic flight (helicopter) conditions  

E-Print Network [OSTI]

was improved understanding of the fundamental vorticity and turbulent flow physics for a dynamically stalling airfoil at realistic helicopter flight conditions. An experimental program was performed on a large-scale (C = 0.45 m) dynamically pitching NACA 0012...

Sahoo, Dipankar

2008-10-10T23:59:59.000Z

429

Refines Efficiency Improvement  

SciTech Connect (OSTI)

Refinery processes that convert heavy oils to lighter distillate fuels require heating for distillation, hydrogen addition or carbon rejection (coking). Efficiency is limited by the formation of insoluble carbon-rich coke deposits. Heat exchangers and other refinery units must be shut down for mechanical coke removal, resulting in a significant loss of output and revenue. When a residuum is heated above the temperature at which pyrolysis occurs (340 C, 650 F), there is typically an induction period before coke formation begins (Magaril and Aksenova 1968, Wiehe 1993). To avoid fouling, refiners often stop heating a residuum before coke formation begins, using arbitrary criteria. In many cases, this heating is stopped sooner than need be, resulting in less than maximum product yield. Western Research Institute (WRI) has developed innovative Coking Index concepts (patent pending) which can be used for process control by refiners to heat residua to the threshold, but not beyond the point at which coke formation begins when petroleum residua materials are heated at pyrolysis temperatures (Schabron et al. 2001). The development of this universal predictor solves a long standing problem in petroleum refining. These Coking Indexes have great potential value in improving the efficiency of distillation processes. The Coking Indexes were found to apply to residua in a universal manner, and the theoretical basis for the indexes has been established (Schabron et al. 2001a, 2001b, 2001c). For the first time, a few simple measurements indicates how close undesired coke formation is on the coke formation induction time line. The Coking Indexes can lead to new process controls that can improve refinery distillation efficiency by several percentage points. Petroleum residua consist of an ordered continuum of solvated polar materials usually referred to as asphaltenes dispersed in a lower polarity solvent phase held together by intermediate polarity materials usually referred to as resins. The Coking Indexes focus on the amount of these intermediate polarity species since coke formation begins when these are depleted. Currently the Coking Indexes are determined by either titration or solubility measurements which must be performed in a laboratory. In the current work, various spectral, microscopic, and thermal techniques possibly leading to on-line analysis were explored for measuring the Coking Indexes.

WRI

2002-05-15T23:59:59.000Z

430

Nuclear reactor flow control method and apparatus  

DOE Patents [OSTI]

Method and apparatus for improving coolant flow in a nuclear reactor during accident as well as nominal conditions. The reactor has a plurality of fuel elements in sleeves and a plenum above the fuel and through which the sleeves penetrate. Holes are provided in the sleeve so that coolant from the plenum can enter the sleeve and cool the fuel. The number and size of the holes are varied from sleeve to sleeve with the number and size of holes being greater for sleeves toward the center of the core and less for sleeves toward the periphery of the core. Preferably the holes are all the same diameter and arranged in rows and columns, the rows starting from the bottom of every sleeve and fewer rows in peripheral sleeves and more rows in the central sleeves.

Church, John P. (1204 Woodbine Rd., Aiken, SC 29803)

1993-01-01T23:59:59.000Z

431

Nuclear reactor flow control method and apparatus  

DOE Patents [OSTI]

Method and apparatus for improving coolant flow in a nuclear reactor during accident as well as nominal conditions. The reactor has a plurality of fuel elements in sleeves and a plenum above the fuel and through which the sleeves penetrate. Holes are provided in the sleeve so that coolant from the plenum can enter the sleeve and cool the fuel. The number and size of the holes are varied from sleeve to sleeve with the number and size of holes being greater for sleeves toward the center of the core and less for sleeves toward the periphery of the core. Preferably the holes are all the same diameter and arranged in rows and columns, the rows starting from the bottom of every sleeve and fewer rows in peripheral sleeves and more rows in the central sleeves.

Church, J.P.

1993-03-30T23:59:59.000Z

432

Innovation flow through social networks: Productivity distribution  

E-Print Network [OSTI]

A detailed empirical analysis of the productivity of non financial firms across several countries and years shows that productivity follows a non-Gaussian distribution with power law tails. We demonstrate that these empirical findings can be interpreted as consequence of a mechanism of exchanges in a social network where firms improve their productivity by direct innovation or/and by imitation of other firm's technological and organizational solutions. The type of network-connectivity determines how fast and how efficiently information can diffuse and how quickly innovation will permeate or behaviors will be imitated. From a model for innovation flow through a complex network we obtain that the expectation values of the productivity level are proportional to the connectivity of the network of links between firms. The comparison with the empirical distributions reveals that such a network must be of a scale-free type with a power-law degree distribution in the large connectivity range.

T. Di Matteo; T. Aste; M. Gallegati

2004-06-19T23:59:59.000Z

433

Power Flow Controller for Renewables: Transformer-less Unified Power Flow Controller for Wind and Solar Power Transmission  

SciTech Connect (OSTI)

GENI Project: MSU is developing a power flow controller to improve the routing of electricity from renewable sources through existing power lines. The fast, innovative, and lightweight circuitry that MSU is incorporating into its controller will eliminate the need for a separate heavy and expensive transformer, as well as the construction of new transmission lines. MSUís controller is better suited to control power flows from distributed and intermittent wind and solar power systems than traditional transformer-based controllers are, so it will help to integrate more renewable energy into the grid. MSUĎs power flow controller can be installed anywhere in the existing grid to optimize energy transmission and help reduce transmission congestion.

None

2012-02-08T23:59:59.000Z

434

Multiscale Simulations for Polymeric Flow  

E-Print Network [OSTI]

Multiscale simulation methods have been developed based on the local stress sampling strategy and applied to three flow problems with different difficulty levels: (a) general flow problems of simple fluids, (b) parallel (one-dimensional) flow problems of polymeric liquids, and (c) general (two- or three-dimensional) flow problems of polymeric liquids. In our multiscale methods, the local stress of each fluid element is calculated directly by performing microscopic or mesoscopic simulations according to the local flow quantities instead of using any constitutive relations. For simple fluids (a), such as the Lenard-Jones liquid, a multiscale method combining MD and CFD simulations is developed based on the local equilibrium assumption without memories of the flow history. (b), the multiscale method is extended to take into account the memory effects that arise in hydrodynamic stress due to the slow relaxation of polymer-chain conformations. The memory of polymer dynamics on each fluid element is thus resolved by performing MD simulations in which cells are fixed at the mesh nodes of the CFD simulations.For general (two- or three-dimensional) flow problems of polymeric liquids (c), it is necessary to trace the history of microscopic information such as polymer-chain conformation, which carries the memories of past flow history, along the streamline of each fluid element. A Lagrangian-based CFD is thus implemented to correctly advect the polymer-chain conformation consistently with the flow. On each fluid element, coarse-grained polymer simulations are carried out to consider the dynamics of entangled polymer chains that show extremely slow relaxation compared to microscopic time scales.

Takahiro Murashima; Takashi Taniguchi; Ryoichi Yamamoto; Shugo Yasuda

2011-01-06T23:59:59.000Z

435

The transition from two phase bubble flow to slug flow  

E-Print Network [OSTI]

The process of transition from bubble to slug flow in a vertical pipe has been studied analytically and experimentally. An equation is presented which gives the agglomeration time as a function of void fraction, channel ...

Radovcich, Nick A.

1962-01-01T23:59:59.000Z

436

Flow distribution channels to control flow in process channels  

DOE Patents [OSTI]

The invention describes features that can be used to control flow to an array of microchannels. The invention also describes methods in which a process stream is distributed to plural microchannels.

Tonkovich, Anna Lee; Arora, Ravi; Kilanowski, David

2014-10-28T23:59:59.000Z

437

Improving Gas Flooding Efficiency  

SciTech Connect (OSTI)

This study focuses on laboratory studies with related analytical and numerical models, as well as work with operators for field tests to enhance our understanding of and capabilities for more efficient enhanced oil recovery (EOR). Much of the work has been performed at reservoir conditions. This includes a bubble chamber and several core flood apparatus developed or modified to measure interfacial tension (IFT), critical micelle concentration (CMC), foam durability, surfactant sorption at reservoir conditions, and pressure and temperature effects on foam systems.Carbon dioxide and N{sub 2} systems have been considered, under both miscible and immiscible conditions. The injection of CO2 into brine-saturated sandstone and carbonate core results in brine saturation reduction in the range of 62 to 82% brine in the tests presented in this paper. In each test, over 90% of the reduction occurred with less than 0.5 PV of CO{sub 2} injected, with very little additional brine production after 0.5 PV of CO{sub 2} injected. Adsorption of all considered surfactant is a significant problem. Most of the effect is reversible, but the amount required for foaming is large in terms of volume and cost for all considered surfactants. Some foams increase resistance to the value beyond what is practical in the reservoir. Sandstone, limestone, and dolomite core samples were tested. Dissolution of reservoir rock and/or cement, especially carbonates, under acid conditions of CO2 injection is a potential problem in CO2 injection into geological formations. Another potential change in reservoir injectivity and productivity will be the precipitation of dissolved carbonates as the brine flows and pressure decreases. The results of this report provide methods for determining surfactant sorption and can be used to aid in the determination of surfactant requirements for reservoir use in a CO{sub 2}-foam flood for mobility control. It also provides data to be used to determine rock permeability changes during CO{sub 2} flooding due to saturation changes, dissolution, and precipitation.

Reid Grigg; Robert Svec; Zheng Zeng; Alexander Mikhalin; Yi Lin; Guoqiang Yin; Solomon Ampir; Rashid Kassim

2008-03-31T23:59:59.000Z

438

Quantitative imaging of turbulent and reacting flows  

SciTech Connect (OSTI)

Quantitative digital imaging, using planar laser light scattering techniques is being developed for the analysis of turbulent and reacting flows. Quantitative image data, implying both a direct relation to flowfield variables as well as sufficient signal and spatial dynamic range, can be readily processed to yield two-dimensional distributions of flowfield scalars and in turn two-dimensional images of gradients and turbulence scales. Much of the development of imaging techniques to date has concentrated on understanding the requisite molecular spectroscopy and collision dynamics to be able to determine how flowfield variable information is encoded into the measured signal. From this standpoint the image is seen as a collection of single point measurements. The present effort aims at realizing necessary improvements in signal and spatial dynamic range, signal-to-noise ratio and spatial resolution in the imaging system as well as developing excitation/detection strategies which provide for a quantitative measure of particular flowfield scalars. The standard camera used for the study is an intensified CCD array operated in a conventional video format. The design of the system was based on detailed modeling of signal and image transfer properties of fast UV imaging lenses, image intensifiers and CCD detector arrays. While this system is suitable for direct scalar imaging, derived quantities (e.g. temperature or velocity images) require an exceptionally wide dynamic range imaging detector. To apply these diagnostics to reacting flows also requires a very fast shuttered camera. The authors have developed and successfully tested a new type of gated low-light level detector. This system relies on fast switching of proximity focused image-diode which is direct fiber-optic coupled to a cooled CCD array. Tests on this new detector show significant improvements in detection limit, dynamic range and spatial resolution as compared to microchannel plate intensified arrays.

Paul, P.H. [Sandia National Laboratories, Livermore, CA (United States)

1993-12-01T23:59:59.000Z

439

Gas flow characterization of restrictive flow orifice devices  

SciTech Connect (OSTI)

A restrictive flow orifice (RFO) can be used to limit the uncontrolled release of system media upon component or line failure in a gas handling system and can thereby enhance the system safety. This report describes a new RFO product available from the Swagelok Companies and specifies the gas flow characteristics of this device. A family of four different sizes of RFO devices is documented.

Shrouf, R.G. [Sandia National Labs., Albuquerque, NM (United States). Safety Engineering Dept.; Page, S.R. [Albuquerque Valve and Fitting Co., NM (United States)

1997-07-01T23:59:59.000Z

440

Geometry of Power Flows in Tree Networks  

E-Print Network [OSTI]

We investigate the problem of power flow and its relationship to optimization in tree networks by looking at the injection regions of the networks. The injection region is the set of all vectors of bus power injections that satisfy the network and operation constraints. The geometrical object of interest is the set of Pareto-optimal points of the injection region, since they are the solutions to the minimization of increasing functions. If the voltage magnitudes are fixed, the injection region of a tree network can be written as a linear transformation of the product of two-bus injection regions, one for each line in the network. Using this decomposition, we show that under the practical condition that the angle difference across each line is not too large, the set of Pareto-optimal points of the injection region remains unchanged by taking the convex hull. Therefore, the optimal power flow problem can be convexified and efficiently solved. This result improves upon earlier works by removing the assumptions o...

Lavaei, Javad; Zhang, Baosen

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "flow improvements purchasing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

The magnetohydrodynamics Coal-Fired Flow Facility  

SciTech Connect (OSTI)

In this quarterly technical Progress report, UTSI reports on continued technical progress in developing the technology for the steam bottoming plant for an MHD Steam combined cycle Power plant. No testing was conducted during the quarter. Major activities were in preparation for the beginning of the 2000 hour POC testing on wester, low sulfur coal scheduled to start in April 1992. The report contains analyses of data from the previous tests in this series that were designed to prepare for the POC test series. Modifications to the flow train that are reported include the rearrangement of the lower temperature heat exchangers in the superheater test module (SHTM) to move the air heater upstream to a higher gas temperature, installation of a gas by-pass to keep the ash seed hopper tap open and installation of the new tubes to be tested in the steam cooled test sections. The major facility modification discussed is the installation of the wet electrostatic precipitator, to replace the venturi scrubber that has been used in previous testing, to take any flow that is not desired through the dry electrostatic precipitator or baghouse. Plans for future testing that are summarized include improvements in test operations, the details of arrangement of high temperature air heater materials for testing and the plans for advanced instrumentation by both UTSI and Mississippi State University.

Not Available

1993-02-01T23:59:59.000Z

442

Insertable fluid flow passage bridgepiece and method  

DOE Patents [OSTI]

A fluid flow passage bridgepiece for insertion into an open-face fluid flow channel of a fluid flow plate is provided. The bridgepiece provides a sealed passage from a columnar fluid flow manifold to the flow channel, thereby preventing undesirable leakage into and out of the columnar fluid flow manifold. When deployed in the various fluid flow plates that are used in a Proton Exchange Membrane (PEM) fuel cell, bridgepieces of this invention prevent mixing of reactant gases, leakage of coolant or humidification water, and occlusion of the fluid flow channel by gasket material. The invention also provides a fluid flow plate assembly including an insertable bridgepiece, a fluid flow plate adapted for use with an insertable bridgepiece, and a method of manufacturing a fluid flow plate with an insertable fluid flow passage bridgepiece.

Jones, Daniel O. (Glenville, NV)

2000-01-01T23:59:59.000Z

443

Convective Heat Transfer and Reference Free-stream Temperature Determination near the Casing of an Axial Flow  

E-Print Network [OSTI]

of an Axial Flow Turbine B. Gumusel 2 and C. Camci 1 Turbomachinery Aero-Heat Transfer Laboratory Department on the casing of an axial flow turbine. The goal is to develop an accurate steady-state heat transfer method for the comparison of various casing surface and tip designs used for turbine performance improvements. The free

Camci, Cengiz

444

PROHIBITED PURCHASES for the Ames Laboratory Purchase Card  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

is a list of items that have been determined to be prohibited: Equipment Computing Devices (e.g. desktop, laptop, tablets, thin clients, mini-PCs) Servers Copiers...

445

Capillary flows in flexible structures  

E-Print Network [OSTI]

Interactions between capillary and elastic effects are relevant to a variety of applications, from micro- and nano-scale manufacturing to biological systems. In this thesis, we investigate capillary flows in extremely ...

Hoberg, Theresa B. (Theresa Blinn)

2013-01-01T23:59:59.000Z

446

2007 Estimated International Energy Flows  

SciTech Connect (OSTI)

An energy flow chart or 'atlas' for 136 countries has been constructed from data maintained by the International Energy Agency (IEA) and estimates of energy use patterns for the year 2007. Approximately 490 exajoules (460 quadrillion BTU) of primary energy are used in aggregate by these countries each year. While the basic structure of the energy system is consistent from country to country, patterns of resource use and consumption vary. Energy can be visualized as it flows from resources (i.e. coal, petroleum, natural gas) through transformations such as electricity generation to end uses (i.e. residential, commercial, industrial, transportation). These flow patterns are visualized in this atlas of 136 country-level energy flow charts.

Smith, C A; Belles, R D; Simon, A J

2011-03-10T23:59:59.000Z

447

particle flow for nonlinear filters  

E-Print Network [OSTI]

particle flow for nonlinear filters Fred Daum 19 June 2012 Copyright © 2012 Raytheon Company. All rights reserved. Customer Success Is Our Mission is a trademark of Raytheon Company. 1 #12;discrete time

Dobigeon, Nicolas

448

Fluid Flow Modeling in Fractures  

E-Print Network [OSTI]

In this paper we study fluid flow in fractures using numerical simulation and address the challenging issue of hydraulic property characterization in fractures. The methodology is based on Computational Fluid Dynamics, ...

Sarkar, Sudipta

2004-01-01T23:59:59.000Z

449

Mechanical design of flow batteries  

E-Print Network [OSTI]

The purpose of this research is to investigate the design of low-cost, high-efficiency flow batteries. Researchers are searching for next-generation battery materials, and this thesis presents a systems analysis encompassing ...

Hopkins, Brandon J. (Brandon James)

2013-01-01T23:59:59.000Z

450

Field Flows of Dark Energy  

E-Print Network [OSTI]

Field Flows of Dark Energy Robert N. Cahn, Roland de Putter,July 8, 2008) Scalar ?eld dark energy evolving from a longthe key aspects of the dark energy evolution during much of

Cahn, Robert N.

2010-01-01T23:59:59.000Z

451

Longitudinal dispersion in vegetated flow  

E-Print Network [OSTI]

Vegetation is ubiquitous in rivers, estuaries and wetlands, strongly influencing both water conveyance and mass transport. The plant canopy affects both mean and turbulent flow structure, and thus both advection and ...

Murphy, Enda

2006-01-01T23:59:59.000Z

452

Pipe Flow System Holly Guest  

E-Print Network [OSTI]

numbers #12;Pipe Flow System Form #12;Components Form Fitting Loss Coefficient, k Globe valve, fully open 10 Angle valve, fully open 5 Swing check valve, fully open 2.5 Gate valve, fully open .2 Shortradius

Clement, Prabhakar

453

Multiscale modeling in granular flow  

E-Print Network [OSTI]

Granular materials are common in everyday experience, but have long-resisted a complete theoretical description. Here, we consider the regime of slow, dense granular flow, for which there is no general model, representing ...

Rycroft, Christopher Harley

2007-01-01T23:59:59.000Z

454

Subcooled flow boiling of fluorocarbons  

E-Print Network [OSTI]

A study was conducted of heat transfer and hydrodynamic behavior for subcooled flow boiling of Freon-113, one of a group of fluorocarbons suitable for use in cooling of high-power-density electronic components. Problems ...

Murphy, Richard Walter

1971-01-01T23:59:59.000Z

455

Minimum Stream Flow Standards (Connecticut)  

Broader source: Energy.gov [DOE]

These regulations apply to all dams and structures which impound or divert waters on rivers or their tributaries, with some exceptions. The regulations set standards for minimum flow (listed in the...

456

Automation of radiochemical analysis by applying flow  

E-Print Network [OSTI]

of detection systems, including scintillation counting, a-spectrometers, proportional counters, mass spectrometry and spectrophotometry. ™ 2010 Published by Elsevier Ltd. Keywords: Flow-analysis technique; Flow

SŠnchez, David

457

MODERN DEVELOPMENTS IN MULTIPHASE FLOW & HEAT TRANSFER  

E-Print Network [OSTI]

MODERN DEVELOPMENTS IN MULTIPHASE FLOW & HEAT TRANSFER "ENGINEERING APPLICATIONS OF FRACTAL and multiphase flow & heat transfer will be stressed. This paper will begin by reviewing some important concepts

Lahey, Richard T.

458

Colorado: Isothermal Battery Calorimeter Quantifies Heat Flow...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Isothermal Battery Calorimeter Quantifies Heat Flow, Helps Make Safer, Longer-lasting Batteries Colorado: Isothermal Battery Calorimeter Quantifies Heat Flow, Helps Make Safer,...

459

Numerical modeling of an all vanadium redox flow battery.  

SciTech Connect (OSTI)

We develop a capability to simulate reduction-oxidation (redox) flow batteries in the Sierra Multi-Mechanics code base. Specifically, we focus on all-vanadium redox flow batteries; however, the capability is general in implementation and could be adopted to other chemistries. The electrochemical and porous flow models follow those developed in the recent publication by [28]. We review the model implemented in this work and its assumptions, and we show several verification cases including a binary electrolyte, and a battery half-cell. Then, we compare our model implementation with the experimental results shown in [28], with good agreement seen. Next, a sensitivity study is conducted for the major model parameters, which is beneficial in targeting specific features of the redox flow cell for improvement. Lastly, we simulate a three-dimensional version of the flow cell to determine the impact of plenum channels on the performance of the cell. Such channels are frequently seen in experimental designs where the current collector plates are borrowed from fuel cell designs. These designs use a serpentine channel etched into a solid collector plate.

Clausen, Jonathan R.; Brunini, Victor E.; Moffat, Harry K.; Martinez, Mario J.

2014-01-01T23:59:59.000Z

460

Legal improvements brighten North Africa production outlook  

SciTech Connect (OSTI)

North Africa`s three main oil producing countries soon will reap benefits of past moves by their governments to encourage investment by international companies. Production of crude oil and natural gas in Algeria, Egypt, and Libya is ready to increase from suppressed levels of the recent past, says International Energy Agency, Paris. The gains are possible despite political risks, total reserves accounting for only 4% of the world`s crude reserves, and oil prices well below levels of the 1980s, when the countries` flow rates peaked. The reason: producing oil in North Africa is profitable. In a recent study entitled North Africa Oil and Gas, IEA attributes the bright production outlook to improvements that the countries` governments have made in the past decade to hydrocarbon laws and the fiscal terms they offer international investors. According to announced plans, the three countries` combined capacity to produce crude oil will rise 18% by the year 2000 to 3.65 million b/d, and a further gain of 700,000 b/d is possible. IEA expects production capacity for natural gas to increase 50% from its 1995 level by 2000 to a combined 139.4 billion cu m/year. This paper discusses production capacities, Algeria`s record, improvements in Egypt, and Libya`s changes.

NONE

1997-05-12T23:59:59.000Z

Note: This page contains sample records for the topic "flow improvements purchasing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Equidistribution results for geodesic flows  

E-Print Network [OSTI]

Using the works of Ma\\~n\\'e \\cite{Ma} and Paternain \\cite{Pat} we study the distribution of geodesic arcs with respect to equilibrium states of the geodesic flow on a closed manifold, equipped with a $\\mathcal{C}^{\\infty}$ Riemannian metric. We prove large deviations lower and upper bounds and a contraction principle for the geodesic flow in the space of probability measures of the unit tangent bundle. We deduce a way of approximating equilibrium states for continuous potentials.

Abdelhamid Amroun

2011-09-15T23:59:59.000Z

462

Morris County Improvement Authority, Morris County, New Jersey Renewable Energy Initiative  

SciTech Connect (OSTI)

The Morris County Improvement Authority (?Authority?), a public body corporate and politic of the State of New Jersey and created and controlled by the County, at the direction of the County and through the Program guaranteed by the County, financed 3.2 MW of solar projects (?Solar Projects?) at fifteen (15) sites for seven (7) local government units (?Local Units?) in and including the County. The Program uses a Power Purchase Agreement (?PPA?) structure, where the Solar Developer constructs, operates and maintains all of the Solar Projects, for the benefit of the Local Units and the Authority, for the maximum State law allowable PPA period of fifteen (15) years. Although all fifteen (15) sites were funded by the Authority, only the Mennen Arena site was considered for the purposes of the required local match funding for this grant. Specifically at the Mennen Arena site, the Authority financed 1.6 MW of solar panels. On October 18, 2013, the DOE Grant was drawn down following completion of the necessary application documents and final execution of an agreement memorializing the contemplated transaction by the Local Units, the County, The Authority and the solar developer. The proceeds of the DOE Grant were then applied to reduce the PPA price to all Local Units across the program and increase the savings from approximately 1/3 to almost half off the existing and forecasted utility pricing over the fifteen (15) year term, without adversely affecting all of the other benefits. With the application of the rate buy down, the price of electricity purchased under the PPA dropped from 10.9 to 7.7 cents/kWh. This made acquisition of renewable energy much more affordable for the Local Units, and it enhanced the success of the program, which will encourage other counties and local units to develop similar programs.

Bonanni, John [Chair, Morris County Improvement Authority] Chair, Morris County Improvement Authority

2013-05-01T23:59:59.000Z

463

Subcritical dynamos in shear flows  

E-Print Network [OSTI]

Identifying generic physical mechanisms responsible for the generation of magnetic fields and turbulence in differentially rotating flows is fundamental to understand the dynamics of astrophysical objects such as accretion disks and stars. In this paper, we discuss the concept of subcritical dynamo action and its hydrodynamic analogue exemplified by the process of nonlinear transition to turbulence in non-rotating wall-bounded shear flows. To illustrate this idea, we describe some recent results on nonlinear hydrodynamic transition to turbulence and nonlinear dynamo action in rotating shear flows pertaining to the problem of turbulent angular momentum transport in accretion disks. We argue that this concept is very generic and should be applicable to many astrophysical problems involving a shear flow and non-axisymmetric instabilities of shear-induced axisymmetric toroidal velocity or magnetic fields, such as Kelvin-Helmholtz, magnetorotational, Tayler or global magnetoshear instabilities. In the light of several recent numerical results, we finally suggest that, similarly to a standard linear instability, subcritical MHD dynamo processes in high-Reynolds number shear flows could act as a large-scale driving mechanism of turbulent flows that would in turn generate an independent small-scale dynamo.

F. Rincon; G. I. Ogilvie; M. R. E. Proctor; C. Cossu

2008-05-09T23:59:59.000Z

464

Pressure and flow characteristics of restrictive flow orifice devices.  

SciTech Connect (OSTI)

A Restrictive Flow Orifice (RFO) can be used to enhance the safe design of a pressure system in several ways. Pressure systems frequently incorporate a regulator and relief valve to protect the downstream equipment from accidental overpressure caused by regulator failure. Analysis frequently shows that in cases of high-flow regulator failure, the downstream pressure may rise significantly above the set pressure of the relief valve. This is due to limited flow capacity of the relief valve. A different regulator or relief valve may need to be selected. A more economical solution to this problem is to use an RFO to limit the maximum system flow to acceptable limits within the flow capacity of the relief valve, thereby enhancing the overpressure protection of laboratory equipment. An RFO can also be used to limit the uncontrolled release of system fluid (gas or liquid) upon component or line failure. As an example, potential asphyxiation hazards resultant from the release of large volumes of inert gas from a 'house' nitrogen system can be controlled by the use of an RFO. This report describes a versatile new Sandia-designed RFO available from the Swagelok Company and specifies the gas flow characteristics of this device. Two sizes, 0.010 and 0.020 inch diameter RFOs are available. These sizes will allow enhanced safety for many common applications. This new RFO design are now commercially available and provide advantages over existing RFOs: a high pressure rating (6600 psig); flow through the RFO is equal for either forward or reverse directions; they minimize the potential for leakage by incorporating the highest quality threaded connections; and can enhance the safety of pressure systems.

Shrouf, Roger D.

2003-06-01T23:59:59.000Z

465

KFS Purchasing and Accounts Payable  

E-Print Network [OSTI]

Terms from the Vendor Application form. If no terms were given, select Net 30 Days. Enter the Vendor Shipping Payment Terms if applicable. Enter Vendor URL address if applicable. #12;10 Address Tab: Address to search for a vendor; by Name or Tax Number are some examples. If you do not find the vendor you

Alpay, S. Pamir

466

KFS Purchasing and Accounts Payable  

E-Print Network [OSTI]

to x5846(must be signed & dated) #12;9 Enter Payment Terms from the Vendor Application form. If no terms were given, select Net 30 Days. Enter the Vendor Shipping Payment Terms if applicable. Enter to search for a vendor; by Name or Tax Number are some examples. If you do not find the vendor you

Alpay, S. Pamir

467

Montgomery County- Green Power Purchasing  

Broader source: Energy.gov [DOE]

In October 2000, a group six county agencies, consisting of Montgomery County, Montgomery County Public Schools, Montgomery County Housing Opportunities Commission, Montgomery College, the...

468

Green Purchasing & Green Technology  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFun with Big Sky LearningGetGraphene's 3D Counterpart

469

C-Mod Purchasing Information  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to someone6Energy, science, and technologyVisitors ReportBuying0HYPREO

470

NREL: Sustainable NREL -Green Purchasing  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the Contributions andData and Resources NREL resourceEnergyTransportation

471

IGNITION IMPROVEMENT OF LEAN NATURAL GAS MIXTURES  

SciTech Connect (OSTI)

This report describes work performed during a thirty month project which involves the production of dimethyl ether (DME) on-site for use as an ignition-improving additive in a compression-ignition natural gas engine. A single cylinder spark ignition engine was converted to compression ignition operation. The engine was then fully instrumented with a cylinder pressure transducer, crank shaft position sensor, airflow meter, natural gas mass flow sensor, and an exhaust temperature sensor. Finally, the engine was interfaced with a control system for pilot injection of DME. The engine testing is currently in progress. In addition, a one-pass process to form DME from natural gas was simulated with chemical processing software. Natural gas is reformed to synthesis gas (a mixture of hydrogen and carbon monoxide), converted into methanol, and finally to DME in three steps. Of additional benefit to the internal combustion engine, the offgas from the pilot process can be mixed with the main natural gas charge and is expected to improve engine performance. Furthermore, a one-pass pilot facility was constructed to produce 3.7 liters/hour (0.98 gallons/hour) DME from methanol in order to characterize the effluent DME solution and determine suitability for engine use. Successful production of DME led to an economic estimate of completing a full natural gas-to-DME pilot process. Additional experimental work in constructing a synthesis gas to methanol reactor is in progress. The overall recommendation from this work is that natural gas to DME is not a suitable pathway to improved natural gas engine performance. The major reasons are difficulties in handling DME for pilot injection and the large capital costs associated with DME production from natural gas.

Jason M. Keith

2005-02-01T23:59:59.000Z

472

Improve Your Boiler's Combustion Efficiency  

SciTech Connect (OSTI)

This revised ITP tip sheet on boiler combustion efficiency provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

Not Available

2006-01-01T23:59:59.000Z

473

Improving Design with Agents, Improving Agents by Design  

E-Print Network [OSTI]

DCB 1 WPI Improving Design with Agents, or, Improving Agents by Design David C. Brown AI in Design ASSUMPTION √? Assume that the design environment is built using agents. i.e., situated, autonomous, flexible √?'s future design and synthesis environment will be built as a real multi-agent system. In what follows, we

Brown, David C.

474

System and method for improving performance of a fluid sensor for an internal combustion engine  

DOE Patents [OSTI]

A system and method for improving sensor performance of an on-board vehicle sensor, such as an exhaust gas sensor, while sensing a predetermined substance in a fluid flowing through a pipe include a structure for extending into the pipe and having at least one inlet for receiving fluid flowing through the pipe and at least one outlet generally opposite the at least one inlet, wherein the structure redirects substantially all fluid flowing from the at least one inlet to the sensor to provide a representative sample of the fluid to the sensor before returning the fluid through the at least one outlet.

Kubinski, David (Canton, MI); Zawacki, Garry (Livonia, MI)

2009-03-03T23:59:59.000Z

475

Investigation of Swirling Flow in Rod Bundle Subchannels Using Computational Fluid Dynamics  

SciTech Connect (OSTI)

The fluid dynamics for turbulent flow through rod bundles representative of those used in pressurized water reactors is examined using computational fluid dynamics (CFD). The rod bundles of the pressurized water reactor examined in this study consist of a square array of parallel rods that are held on a constant pitch by support grids spaced axially along the rod bundle. Split-vane pair support grids are often used to create swirling flow in the rod bundle in an effort to improve the heat transfer characteristics for the rod bundle during both normal operating conditions and in accident condition scenarios. Computational fluid dynamics simulations for a two subchannel portion of the rod bundle were used to model the flow downstream of a split-vane pair support grid. A high quality computational mesh was used to investigate the choice of turbulence model appropriate for the complex swirling flow in the rod bundle subchannels. Results document a central swirling flow structure in each of the subchannels downstream of the split-vane pairs. Strong lateral flows along the surface of the rods, as well as impingement regions of lateral flow on the rods are documented. In addition, regions of lateral flow separation and low axial velocity are documented next to the rods. Results of the CFD are compared to experimental particle image velocimetry (PIV) measurements documenting the lateral flow structures downstream of the split-vane pairs. Good agreement is found between the computational simulation and experimental measurements for locations close to the support grid. (authors)

Holloway, Mary V. [United States Naval Academy, 117 Decatur Road, Annapolis, MD 21402-5018 (United States); Beasley, Donald E. [Clemson University, Clemson, S.C. 29634 (United States); Conner, Michael E. [Westinghouse Nuclear Fuel (United States)

2006-07-01T23:59:59.000Z

476

Stochastic models for turbulent reacting flows  

SciTech Connect (OSTI)

The goal of this program is to develop and apply stochastic models of various processes occurring within turbulent reacting flows in order to identify the fundamental mechanisms governing these flows, to support experimental studies of these flows, and to further the development of comprehensive turbulent reacting flow models.

Kerstein, A. [Sandia National Laboratories, Livermore, CA (United States)

1993-12-01T23:59:59.000Z

477

Flow Duration Curve Load Duration Curve  

E-Print Network [OSTI]

Flow Duration Curve Load Duration Curve 1. Develop Flow Duration Curve 2. Estimate load given flow and concentration data--select appropriate conversion factors 3. Develop Load Duration Curve 4. Plot observed data with Load Duration Curve What are they? How do you make one? Describes the percent of time a flow rate

478

SHORT-TUBE SUBCRITICAL FLOW Enerag Division  

E-Print Network [OSTI]

#12;SHORT-TUBE SUBCRITICAL FLOW Y. C. Mei Enerag Division Oak Ridge National Laboratory Oak Ridge-tube subcritical flow. For short tubes used as refrigerant expansion devices, the orifice model is found inadequate-TUBE SUBCRITICAL FLOW INTRODUCTION Much theoretical and experimental work regarding short tube fluid flow has

Oak Ridge National Laboratory

479

Mach flow angularity probes for scramjet engine flow path diagnostics  

SciTech Connect (OSTI)

Mach-flow angularity (MFA) probes were developed for use in scramjet flow path probe rakes. Prototype probes were fabricated to demonstrate the assembly processes (numerical control machining, furnace brazing, and electron beam welding). Tests of prototype probes confirmed the thermal durability margins and life cycle. Selected probes were calibrated in air at Mach numbers from 1.75 to 6.0. Acceptance criteria for the production probes stressed thermal durability and pressure (and, consequently, Mach number) measurement quality. This new water-cooled MFA probe has 0.397-cm shaft diameter and is capable of withstanding heat fluxes of 2.724 kW/sq cm.

Jalbert, P.A.; Hiers, R.S. Jr. [Sverdrup Technology, Inc., Arnold AFS, TN (United States)

1993-12-31T23:59:59.000Z

480

California energy flow in 1993  

SciTech Connect (OSTI)

Energy consumption in the state of California decreased about 3% in 1993 reflecting continuation of the recession that was manifest in a moribund construction industry and a high state unemployment that ran counter to national recovery trends. Residential/commercial use decreased slightly reflecting a mild winter in the populous southern portion of the state, a decrease that was offset to some extent by an increase in the state population. Industrial consumption of purchased energy declined substantially as did production of self-generated electricity for in-house use. Consumption in the transportation sector decreased slightly. The amount of power transmitted by the utilities was at 1992 levels; however a smaller proportion was produced by the utilities themselves. Generation of electricity by nonutilities, primarily cogenerators and small power producers, was the largest of any state in the US. The growth in the number of private power producers combined with increased amounts of electricity sold to the public utilities set the stage for the sweeping proposals before the California Public Utility Commission to permit direct sales from the nonutilities to retail customers. California production of both oil and natural gas declined; however, to meet demand only the imports of natural gas increased. A break in the decade-long drought during the 1992--1993 season resulted in a substantial increase in the amount of hydroelectricity generated during the year. Geothermal energy`s contribution increased substantially because of the development of new resources by small power producers. Decline in steam production continued at The Geysers, the state`s largest field, principally owned and managed by a public utility. Increases in windpower constituted 1--1/2% of the total electric supply--up slightly from 1992. Several solar photo voltaic demonstration plants were in operation, but their contribution remained small.

Borg, I.Y.; Briggs, C.K.

1995-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "flow improvements purchasing" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Mirrored serpentine flow channels for fuel cell  

DOE Patents [OSTI]

A PEM fuel cell having serpentine flow field channels wherein the input/inlet legs of each channel border the input/inlet legs of the next adjacent channels in the same flow field, and the output/exit legs of each channel border the output/exit legs of the next adjacent channels in the same flow field. The serpentine fuel flow channels may be longer, and may contain more medial legs, than the serpentine oxidant flow channels.

Rock, Jeffrey Allan (Rochester, NY)

2000-08-08T23:59:59.000Z

482

Pressure compensated flow control valve  

DOE Patents [OSTI]

The invention is an air flow control valve which is capable of maintaining a constant flow at the outlet despite changes in the inlet or outlet pressure. The device consists of a shell assembly with an inlet chamber and outlet chamber separated by a separation plate. The chambers are connected by an orifice. Also located within the inlet chamber is a port controller assembly. The port controller assembly consists of a differential pressure plate and port cap affixed thereon. The cap is able to slide in and out of the orifice separating the inlet and outlet chambers. When the pressure differential is sufficient, the differential pressure plate rises or falls to maintain a constant air flow. Movement of the port controller assembly does not require the use of seals, diaphragms, tight tolerances, bushings, bearings, hinges, guides, or lubricants.

Minteer, Daniel J. (West Richland, WA)

1999-01-01T23:59:59.000Z

483

Connectivity due to preferential flow controls water flow and solute transport at the hillslope scale  

E-Print Network [OSTI]

feedback, flow through the fractured bedrock, kinematic wave routing and flow through discrete preferentialConnectivity due to preferential flow controls water flow and solute transport at the hillslope the major controls on water flow and solute transport at the hillslope scale remains a major topic

Weiler, Markus

484

Rheo-optical determination of flow birefringence and flow dichroism with the pulsed laser method  

E-Print Network [OSTI]

Rheo-optical determination of flow birefringence and flow dichroism with the pulsed laser method online 29 August 2006 Rheo-optical measurements of the flow birefringence, flow dichroism systems under flow. However, the standard setup of an optical train, using phase modulation for the rheo-optical

485

Interfacial flows in corrugated microchannels: flow regimes, transitions and hysteresis  

E-Print Network [OSTI]

, 1266-1276 (2011), doi:10.1016/j.ijmultiphaseflow.2011.08.003 #12;model, microfluidics, porous media 1 of displacing oil by water in enhanced oil recovery (Marle, 1981; Lenormand et al., 1988). More recently on hy- drodynamic principles and concrete flow mechanisms. In fact, conflicting assumptions have been

Feng, James J.

486

Shear flow effects on ion thermal transport in tokamaks  

SciTech Connect (OSTI)

From various laboratory and numerical experiments, there is clear evidence that under certain conditions the presence of sheared flows in a tokamak plasma can significantly reduce the ion thermal transport. In the presence of plasma fluctuations driven by the ion temperature gradient, the flows of energy and momentum parallel and perpendicular to the magnetic field are coupled with each other. This coupling manifests itself as significant off-diagonal coupling coefficients that give rise to new terms for anomalous transport. The authors derive from the gyrokinetic equation a set of velocity moment equations that describe the interaction among plasma turbulent fluctuations, the temperature gradient, the toroidal velocity shear, and the poloidal flow in a tokamak plasma. Four coupled equations for the amplitudes of the state variables radially extended over the transport region by toroidicity induced coupling are derived. The equations show bifurcations from the low confinement mode without sheared flows to high confinement mode with substantially reduced transport due to strong shear flows. Also discussed is the reduced version with three state variables. In the presence of sheared flows, the radially extended coupled toroidal modes driven by the ion temperature gradient disintegrate into smaller, less elongated vortices. Such a transition to smaller spatial correlation lengths changes the transport from Bohm-like to gyrobohm-like. The properties of these equations are analyzed. The conditions for the improved confined regime are obtained as a function of the momentum-energy deposition rates and profiles. The appearance of a transport barrier is a consequence of the present theory.

Tajima, T.; Horton, W.; Dong, J.Q. [Univ. of Texas, Austin, TX (United States). Institute for Fusion Studies; Kishimoto, Y. [JAERI (Japan). Naka Fusion Research

1995-03-01T23:59:59.000Z

487

Nuclear reactor downcomer flow deflector  

DOE Patents [OSTI]

A nuclear reactor having a coolant flow deflector secured to a reactor core barrel in line with a coolant inlet nozzle. The flow deflector redirects incoming coolant down an annulus between the core barrel and the reactor vessel. The deflector has a main body with a front side facing the fluid inlet nozzle and a rear side facing the core barrel. The rear side of the main body has at least one protrusion secured to the core barrel so that a gap exists between the rear side of the main body adjacent the protrusion and the core barrel. Preferably, the protrusion is a relief that circumscribes the rear side of the main body.

Gilmore, Charles B. (Greensburg, PA); Altman, David A. (Pittsburgh, PA); Singleton, Norman R. (Murrysville, PA)

2011-02-15T23:59:59.000Z

488

High gas flow alpha detector  

DOE Patents [OSTI]

An alpha detector for application in areas of high velocity gas flows, such as smokestacks and air vents. A plurality of spaced apart signal collectors are placed inside an enclosure, which would include smokestacks and air vents, in sufficient numbers to substantially span said enclosure so that gas ions generated within the gas flow are electrostatically captured by the signal collector means. Electrometer means and a voltage source are connected to the signal collectors to generate an electrical field between adjacent signal collectors, and to indicate a current produced through collection of the gas ions by the signal collectors. 4 figs.

Bolton, R.D.; Bounds, J.A.; Rawool-Sullivan, M.W.

1996-05-07T23:59:59.000Z

489

High gas flow alpha detector  

DOE Patents [OSTI]

An alpha detector for application in areas of high velocity gas flows, such as smokestacks and air vents. A plurality of spaced apart signal collectors are placed inside an enclosure, which would include smokestacks and air vents, in sufficient numbers to substantially span said enclosure so that gas ions generated within the gas flow are electrostatically captured by the signal collector means. Electrometer means and a voltage source are connected to the signal collectors to generate an electrical field between adjacent signal collectors, and to indicate a current produced through collection of the gas ions by the signal collectors.

Bolton, Richard D. (Los Alamos, NM); Bounds, John A. (Los Alamos, NM); Rawool-Sullivan, Mohini W. (Los Alamos, NM)

1996-01-01T23:59:59.000Z

490

Non-Newtonian fluid flow  

E-Print Network [OSTI]

zero and unity. The Ostwald- de Waele Equation (4), commonly known as the power law, is sometimes used to describe fluid behavior of this type. The rheological equation is (4) where the parameters "k" and "n" are constant for a particular fluid... be extended to include Reynolds numbers and the type of flow determined to be laminar and/or turbulent. It is assumed that the transition from laminar to turbulent flow occurs at a Reynolds number of 2100, the numeric distribution of Reynolds numbers...

Osinski, Charles Anthony

1963-01-01T23:59:59.000Z

491

Dynamo action in flows with  

E-Print Network [OSTI]

Dynamo action in flows with cat's eyes A l i c e C o u r v o i s i e r A n d r e w G i l b e r t Y of k for R = 500 and the flow (2.4) and (2.5). nts k = 2.5 and k = 5 are highlighted. Magnetic field). In (a) k = 2.5 and we have 0.5 max Bz (with max Bz 0.6 max |B|), and in (b) k = 5 and the levels .65 max

Li, Yi

492

Improved Soybean Oil for Biodiesel Fuel  

SciTech Connect (OSTI)

The goal of this program was to generate information on the utility of soybean germplasm that produces oil, high in oleic acid and low in saturated fatty acids, for its use as a biodiesel. Moreover, data was ascertained on the quality of the derived soybean meal (protein component), and the agronomic performance of this novel soybean germplasm. Gathering data on these later two areas is critical, with respect to the first, soybean meal (protein) component is a major driver for commodity soybean, which is utilized as feed supplements in cattle, swine, poultry and more recently aquaculture production. Hence, it is imperative that the resultant modulation in the fatty acid profile of the oil does not compromise the quality of the derived meal, for if it does, the net value of the novel soybean will be drastically reduced. Similarly, if the improved oil trait negative impacts the agronomics (i.e. yield) of the soybean, this in turn will reduce the value of the trait. Over the course of this program oil was extruded from approximately 350 bushels of soybean designated 335-13, which produces oil high in oleic acid (>85%) and low in saturated fatty acid (<6%). As predicted improvement in cold flow parameters were observed as compared to standard commodity soybean oil. Moreover, engine tests revealed that biodiesel derived from this novel oil mitigated NOx emissions. Seed quality of this soybean was not compromised with respect to total oil and protein, nor was the amino acid profile of the derived meal as compared to the respective control soybean cultivar with a conventional fatty acid profile. Importantly, the high oleic acid/low saturated fatty acids oil trait was not impacted by environment and yield was not compromised. Improving the genetic potential of soybean by exploiting the tools of biotechnology to improve upon the lipid quality of the seed for use in industrial applications such as biodiesel will aid in expanding the market for the crop. This in turn, may lead to job creation in rural areas of the country and help stimulate the agricultural economy. Moreover, production of soybean with enhanced oil quality for biodiesel may increase the attractiveness of this renewable, environmentally friendly fuel.

Tom Clemente; Jon Van Gerpen

2007-11-30T23:59:59.000Z

493

Water Efficiency Improvements at Various Environmental Protection...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Water Efficiency Improvements at Various Environmental Protection Agency Sites Water Efficiency Improvements at Various Environmental Protection Agency Sites Water Efficiency...

494

Improving alternative fuel utilization: detailed kinetic combustion...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Improving alternative fuel utilization: detailed kinetic combustion modeling & experimental testing Improving alternative fuel utilization: detailed kinetic combustion modeling &...

495

Proposal for the award of a blanket purchase contract, without competitive tendering, for the supply of control electronics for the LHC collimation system as well as for various test and measurement e  

E-Print Network [OSTI]

This document concerns the negotiation of a blanket purchase contract for the supply of control electronics for the LHC collimation system as well as for various test and measurement equipment and associated software. The Finance Committee is invited to agree to the negotiation of a contract, without competitive tendering, with NATIONAL INSTRUMENTS (CH) for the supply of control electronics for the LHC collimation system as well as for various test and measurement equipment and associated software for an amount not exceeding 7 000 000 Swiss francs for a period of three years, not subject to revision.

2006-01-01T23:59:59.000Z

496

An improved viscosity equation to characterize shear-thinning fluids  

SciTech Connect (OSTI)

An improved viscosity equation is proposed for shear-thinning polymer solutions, using a kinetic approach to model the rate of formation and loss of interactive bonding during shear flow. The bonds are caused by temporary polymer entanglements in polymer solutions, and by coordination bonding in metal ion cross-linked gels. The equation characterizes the viscosity of shear-thinning fluids over a wide range of shear rates, from the zero shear region through to infinite shear viscosity. The equation has been used to characterize fluid data from a wide range of fluids. Recent work indicates that a range of polymer solutions, polymer-based drilling fluids and frac-gels do not have a measurable yield stress, and that the equations which use extrapolated values of yield stress can be significantly in error. The new equation is compared with the Carreau and Cross equations, using the correlation procedure of Churchill and Usagi. It gives a significantly better fit to the data (by up to 50%) over a wide range of shear rates. The improved equation can be used for evaluating the fluid viscosity during the flow of polymeric fluids, in a range of oilfield applications including drilling, completion, stimulation and improved recovery (IOR) processes.

Allen, E.

1995-11-01T23:59:59.000Z

497

Numerical and experimental investigation of vortical flow-flame interaction  

SciTech Connect (OSTI)

A massively parallel coupled Eulerian-Lagrangian low Mach number reacting flow code is developed and used to study the structure and dynamics of a forced planar buoyant jet flame in two dimensions. The numerical construction uses a finite difference scheme with adaptive mesh refinement for solving the scalar conservation equations, and the vortex method for the momentum equations, with the necessary coupling terms. The numerical model construction is presented, along with computational issues regarding the parallel implementation. An experimental acoustically forced planar jet burner apparatus is also developed and used to study the velocity and scalar fields in this flow, and to provide useful data for validation of the computed jet. Burner design and laser diagnostic details are discussed, along with the measured laboratory jet flame dynamics. The computed reacting jet flow is also presented, with focus on both large-scale outer buoyant structures and the lifted flame stabilization dynamics. A triple flame structure is observed at the flame base in the computed flow, as is theoretically expected, but was not observable with present diagnostic techniques in the laboratory flame. Computed and experimental results are compared, along with implications for model improvements.

Najm, H.N.; Schefer, R.W.; Milne, R.B.; Mueller, C.J. [Sandia National Labs., Livermore, CA (United States); Devine, K.D.; Kempka, S.N. [Sandia National Labs., Albuquerque, NM (United States)

1998-02-01T23:59:59.000Z

498

New catalysts improves heavy feedstock hydro-cracking  

SciTech Connect (OSTI)

A new zeolite-Y-based second-stage hydrocracking catalyst, designated S-703, has been developed by Shell. Laboratory testing and commercial use show it has significantly improved performance with respect to gas make and middle-distillate selectivity in processing heavy feedstocks when compared to a Shell catalyst, S-753, developed earlier. Further, the new catalyst exhibits enhanced stability. Extensive laboratory testing of the S-703 catalyst has been carried out under single-stage, stacked- bed, two-stage-flow, and series-flow conditions. Commercial experience with the new catalyst has now been obtained in several units. To date, the commercial results have confirmed the laboratory results in terms of the superior, heavy- feedstock processing performance of the new catalyst in all respects. Because the trend toward heavier feedstocks is expected to continue, it is likely that catalysts such as S- 703 will find increasing applications in hydrocrackers in the future.

Hoek, A.; Huizinga, T.; Esener, A.A.; Maxwell, I.E.; Stork, W. (Koninklijke/Shell Laboratorium, Amsterdam (NL)); van de Meerakker, F.J. (Shell Internationale Petroleum Maatschappij BV, The Hauge (NL)); Sy, O. (Shell Canada Ltd., Oakville, Ontario (CA))

1991-04-22T23:59:59.000Z

499

Detecting Discrepancies and Improving Intelligibility  

E-Print Network [OSTI]

Detecting Discrepancies and Improving Intelligibility: Two Preliminary Evaluations of RIPTIDES evaluations of RIPTIDES, a sys- tem that combines information extraction (IE), extraction-based sum unduly sacrificing content relevance. 1 Introduction We report on two preliminary evaluations of RIPTIDES

Wagstaff, Kiri L.

500

Hamilton County- Home Improvement Program  

Broader source: Energy.gov [DOE]

The Hamilton County, Ohio, Home Improvement Program (HIP) was originally initiated in 2002, and then reinstated in May 2008. The HIP loan allows homeowners in Hamilton County communities to borrow...