Powered by Deep Web Technologies
Note: This page contains sample records for the topic "flats environmental technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Preliminary Notice of Violation , Rocky Flats Environmental Technology...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Violation , Rocky Flats Environmental Technology Site - EA-96-05 Preliminary Notice of Violation , Rocky Flats Environmental Technology Site - EA-96-05 October 7, 1996 Preliminary...

2

EA-1146: Radioactive Waste Storage at Rocky Flats Environmental Technology  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

46: Radioactive Waste Storage at Rocky Flats Environmental 46: Radioactive Waste Storage at Rocky Flats Environmental Technology Site, Golden, Colorado EA-1146: Radioactive Waste Storage at Rocky Flats Environmental Technology Site, Golden, Colorado SUMMARY This EA evaluates the environmental impacts of the proposal to convert buildings at the U.S. Department of Energy Rocky Flats Environmental Technology Site from their former uses to interim waste storage facilities in order to increase storage capacity for low-level waste, low-level mixed waste, transuranic waste, and transuranic mixed waste. PUBLIC COMMENT OPPORTUNITIES None available at this time. DOCUMENTS AVAILABLE FOR DOWNLOAD April 9, 1996 EA-1146: Finding of No Significant Impact Radioactive Waste Storage at Rocky Flats Environmental Technology Site, Golden, Colorado

3

Independent Oversight Review, Rocky Flats Environmental Technology Site -  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Independent Oversight Review, Rocky Flats Environmental Technology Independent Oversight Review, Rocky Flats Environmental Technology Site - March 2000 Independent Oversight Review, Rocky Flats Environmental Technology Site - March 2000 March 2000 Review of the Rocky Flats Environmental Technology Site Transportation Emergency Management Program The U.S. Department of Energy (DOE) Office of Emergency Management Oversight, within the Office of Independent Oversight and Performance Assurance, conducted a transportation emergency management review and a follow-up review of the emergency management program at Rocky Flats Environmental Technology Site (RFETS) in February 2000. The primary purpose of this review was to assess the effectiveness of the Department's emergency management programs for transportation events involving hazardous materials (not related to transuranic waste or nuclear

4

Independent Oversight Review, Rocky Flats Environmental Technology Site -  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Rocky Flats Environmental Technology Rocky Flats Environmental Technology Site - March 2000 Independent Oversight Review, Rocky Flats Environmental Technology Site - March 2000 March 2000 Review of the Rocky Flats Environmental Technology Site Transportation Emergency Management Program The U.S. Department of Energy (DOE) Office of Emergency Management Oversight, within the Office of Independent Oversight and Performance Assurance, conducted a transportation emergency management review and a follow-up review of the emergency management program at Rocky Flats Environmental Technology Site (RFETS) in February 2000. The primary purpose of this review was to assess the effectiveness of the Department's emergency management programs for transportation events involving hazardous materials (not related to transuranic waste or nuclear

5

Preliminary Notice of Violation , Rocky Flats Environmental Technology Site  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Violation , Rocky Flats Environmental Violation , Rocky Flats Environmental Technology Site - EA-96-05 Preliminary Notice of Violation , Rocky Flats Environmental Technology Site - EA-96-05 October 7, 1996 Preliminary Notice of Violation issued to Safe Sites of Colorado related to Radiological and Work Control Deficiencies associated with Two Radiological Release Events at the Rocky Flats Environmental Technology Site, (EA-96-05) Based on our evaluation of these matters, DOE has concluded that violations of DOE's Occupational Radiation Protection Rule (10 CFR 835) and Quality Assurance Rule (10 CFR 830.120) likely occurred. An enforcement conference was held with you, as well as senior management of KHLL and Rocky Mountain Remediation Services (RMRS), on September 10, 1996. This conference included a discussion of the facts and circumstances surrounding these

6

Benchmarking and Performance Improvement at Rocky Flats Environmental Technology Site  

Science Conference Proceedings (OSTI)

The Rocky Flats Environmental Technology Site (RFETS) has initiated a major work process improvement campaign using the tools of formalized benchmarking and streamlining. This paper provides insights into some of the process improvement activities performed at Rocky Flats from November 1995 through December 1996. It reviews the background, motivation, methodology, results, and lessons learned from this ongoing effort. The paper also presents important gains realized through process analysis and improvement including significant cost savings, productivity improvements, and an enhanced understanding of site work processes.

Elliott, C. [Kaiser-Hill Co., LLC, Golden, CO (United States)], Doyle, D. [USDOE Rocky Flats Office, Golden, CO (United States)], Featherman, W.D. [Project Performance Corp., Sterline, VA (United States)

1997-12-31T23:59:59.000Z

7

Actinide solution processing at the Rocky Flats Environmental Technology Site  

SciTech Connect

The Department of Energy (DOE) has prepared an Environmental Assessment (EA), DOE/EA-1039, for radioactive solution removal and processing at Rocky Flats Environmental Technology Site, Golden, Colorado. The proposal for solution removal and processing is in response to independent safety assessments and an agreement with the State of Colorado to remove mixed residues at Rocky Flats and reduce the risk of future accidents. Monthly public meetings were held during the scoping and preparation of the EA. The scope of the EA included evaluations of alternative methods and locations of solution processing. A comment period from February 20, 1995 through March 21, 1995 was provided to the public and the State of Colorado to offer written comment on the EA. Comments were received from the State of Colorado and the U.S. Environmental Protection Agency. A response to the agency comments is included in the Final EA.

NONE

1995-04-01T23:59:59.000Z

8

DECOMMISSIONING CHALLENGES AT THE ROCKY FLATS ENVIRONMENTAL TECHNOLOGY SITE  

Science Conference Proceedings (OSTI)

This paper presents a discussion of the demolition of the Building 788 cluster at the Rocky Flats Environmental Technology Site (RFETS) in Golden, Colorado. The Building 788 Cluster was a Resource Conservation and Recovery Act (RCRA) permitted storage facilities and ancillary structures. Topics covered include the methods employed for Project Planning, Regulatory Compliance, Waste Management, Hazard Identification, Radiological Controls, Risk Management, Field Implementation, and Cost Schedule control, and Lessons Learned and Project Closeout.

Dorr, K. A.; Hoover, J.

2002-02-25T23:59:59.000Z

9

The US Department of Energy`s facility reuse at the Rocky Flats Environmental Technology Site  

Science Conference Proceedings (OSTI)

This audit was initiated to determine whether the Rocky Flats Environmental Technology Site was maximizing its reuse of excess facilities.

NONE

1998-08-01T23:59:59.000Z

10

Final Land Configuration for the Rocky Flats Environmental Technology Site  

SciTech Connect

Closure of the Rocky Flats Environmental Technology Site (RFETS) has been completed. The future land use of the site is designated as a National Wildlife Refuge. A joint effort between Kaiser-Hill, Department of Energy, U.S. Fish and Wildlife Service, Environmental Protection Agency, State of Colorado, and other stakeholders was initiated to provide direction for developing the final land configuration. Through early identification of issues and developing mutually agreeable solutions, the final land configuration of the site was successfully completed. (authors)

Stegen, R. L.; Kapinos, J. M.; Wehner, J. P.; Snyder, B. [Parsons, 1700 Broadway, Suite 900, Denver, Colorado 80290 (United States); Davis, R. W. [Kaiser-Hill Company, LLC, 9193 S. Jamaica, Englewood, Colorado 80112 (United States)

2006-07-01T23:59:59.000Z

11

Sitewide risk perspectives for the Rocky Flats Environmental Technology Site  

SciTech Connect

The US Department of Energy (DOE) has recently finalized a closure plan (originally called the Ten Year Plan) for closure and environmental cleanup of previous nuclear weapons facilities. The DOE Rocky Flats Field Office has established priorities for risk reduction work to Support closure activities, as well as addressing those hazards associated with storage and management of radioactive materials and hazardous chemicals. To provide information for future National Environmental Policy Act (NEPA) or other regulatory assessments of specific risk reduction projects identified in the Closure Plan, a risk assessment of normal operations and potential accidents was recently prepared to provide an updated baseline of the cumulative impacts to the worker, public and environment due to the Site`s operations, activities, and environmental conditions in light of the Site`s change in mission, and of future closure projects. This paper summarizes the risk assessment approach, results, and conclusions.

Olinger, S.J. [Dept. of Energy, Golden, CO (United States). Rocky Flats Field Office; Foppe, T.L. [M.H. Chew and Associates, Inc., Golden, CO (United States)

1998-05-01T23:59:59.000Z

12

NATURAL HERITAGE RESOURCES OF THE ROCKY FLATS ENVIRONMENTAL TECHNOLOGY SITE  

E-Print Network (OSTI)

.S. Department of Energy's Rocky Flats Field Office for making this report possible. In particular, Dr. John.S. Department of Energy's Rocky Flats Field Office to inventory and rank the natural heritage resources at its Divide. The RFETS is part of the U.S. Department of Energy nuclear weapons manufacturing complex

13

The Plutonium Stabilization andPackaging System at the Rocky Flats Environmental Technology Site,IG-0554  

Energy.gov (U.S. Department of Energy (DOE))

From 1952 to 1989, the Rocky Flats Environmental Technology Site (Rocky Flats) produced nuclear weapons components for the Department of Energy. In January 1992, the primary mission of the site...

14

Independent Oversight Review of the Rocky Flats Environmental Technology Site Transportation Emergency Management Program  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Rocky Rocky Flats Environmental Technology Site Transportation Emergency Management Program Independent Oversight Review of the March 2000 OVERSIGHT Table of Contents EXECUTIVE SUMMARY ................................................................... 1 1.0 INTRODUCTION ........................................................................... 4 2.0 RESULTS ......................................................................................... 6 Hazard Survey and Hazards Assessments .................................... 6 Program Plans and Procedures ..................................................... 7 Emergency Responder Performance and Preparation ............... 9 Offsite Interfaces ........................................................................... 10 Feedback and Continuous Improvement Process

15

Landfill Cover Revegetation at the Rocky Flats Environmental...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Landfill Cover Revegetation at the Rocky Flats Environmental Technology Site Landfill Cover Revegetation at the Rocky Flats Environmental Technology Site Landfill Cover...

16

EA-1146: Radioactive Waste Storage at Rocky Flats Environmental...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

46: Radioactive Waste Storage at Rocky Flats Environmental Technology Site, Golden, Colorado EA-1146: Radioactive Waste Storage at Rocky Flats Environmental Technology Site,...

17

Rocky Flats Environmental Technology Site Ecological Monitoring Program 1995 annual report  

Science Conference Proceedings (OSTI)

The Ecological Monitoring Program (ECMP) was established at the Rocky Flats Environmental Technology Site (Site) in September 1992. At that time, EcMP staff developed a Program Plan that was peer-reviewed by scientists from western universities before submittal to DOE RFFO in January 1993. The intent of the program is to measure several quantitative variables at different ecological scales in order to characterize the Rocky Flats ecosystem. This information is necessary to document ecological conditions at the Site in impacted and nonimpacted areas to determine if Site practices have had ecological impacts, either positive or negative. This information can be used by managers interested in future use scenarios and CERCLA activities. Others interested in impact analysis may also find the information useful. In addition, these measurements are entered into a database which will serve as a long-term information repository that will document long-term trends and potential future changes to the Site, both natural and anthropogenic.

NONE

1995-05-31T23:59:59.000Z

18

Implementation of IAEA safeguards at the Rocky Flats Environmental Technology Site  

Science Conference Proceedings (OSTI)

When President Clinton spoke to the United Nations General Assembly in September 1993, he offered to place US excess defense nuclear material under International Atomic Energy Agency (IAEA) safeguards, before the next Nuclear Nonproliferation Treaty (NPT) Extension Conference. This set in motion a flurry of activities at three DOE facilities, including Rocky Flats Environmental Technology Site (Site). With general guidance from DOE Headquarters, the facility selected a suitable storage area, identified appropriate materials, and acquired the necessary instrumentation to implement full-scale IAEA safeguards on excess plutonium oxide.

Giacomini, J.J.; Finleon, C.A.; Larsen, R.K. [EG and G Rocky Flats, Inc., Golden, CO (United States). Rocky Flats Plant; Lucas, M.; Langner, D. [Los Alamos National Lab., NM (United States)

1995-07-01T23:59:59.000Z

19

Rebaselining of the plutonium residue elimination project at Rocky Flats Environmental Technology Site  

SciTech Connect

Systems Engineering and Value Engineering principles were put into practice in rebaselining the Pu Residue Stabilization and Elimination Project at the Rocky Flats Environmental Technology Site. Tradeoff studies were conducted as to how to best rebaseline the system under the new Safeguards Termination Limits (STSs) issued by the Department of Energy. Through the use of a computerized database, the means by which Stakeholder values and other high-level requirements have been included in the tradeoff studies were documented. 13 refs., 2 figs., 1 tab.

Sailor, W.C.; Catlett, D.S.; Burns, T.P. [and others

1997-03-01T23:59:59.000Z

20

Finding of no significant impact. Consolidation and interim storage of special nuclear material at Rocky Flats Environmental Technology Site  

Science Conference Proceedings (OSTI)

The Department of Energy (DOE) has prepared an environmental assessment (EA), DOE/EA -- 1060, for the consolidation, processing, and interim storage of Category I and II special nuclear material (SNM) in Building 371 at the Rocky Flats Environmental Technology Site (hereinafter referred to as Rocky Flats or Site), Golden, Colorado. The scope of the EA included alternatives for interim storage including the no action alternative, the construction of a new facility for interim storage at Rocky Flats, and shipment to other DOE facilities for interim storage.

NONE

1995-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "flats environmental technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Cementation and solidification of miscellaneous mixed wastes at the Rocky Flats Environmental Technology Site  

Science Conference Proceedings (OSTI)

The Rocky Flats Environmental Technology Site produces a variety of wastes which are amenable to micro-encapsulation in cement Portland cement is an inexpensive and readily available material for this application. The Waste Projects (WP) group at Rocky Flats evaluated cementation to determine its effectiveness in encapsulating several wastes. These included waste analytical laboratory solutions, incinerator ash, hydroxide precipitation sludge, and an acidic solution from the Delphi process (a chemical oxidation technology being evaluated as an alternative to incineration). WP prepared surrogate wastes and conducted designed experiments to optimize the cement formulation for the waste streams. These experiments used a Taguchi or factorial experimental design, interactions between the variables were also considered in the testing. Surrogate waste samples were spiked with various levels of each of six Resource Conservation and Recovery Act (RCRA) listed metals (Cd, Cr, Ba, Pb, Ni, and Ag), cemented using the optimized formulation, and analyzed for leach resistance using the Toxicity Characteristic Leaching Procedure (TCLP). The metal spike levels chosen were based on characterization data, and also based on an estimate of the highest levels of contaminants suspected in the waste. This paper includes laboratory test results for each waste studied. These include qualitative observations as well as quantitative data from TCLP analyses and environmental cycling studies. The results from these experiments show that cement stabilization of the different wastes can produce final waste forms which meet the current RCRA Land Disposal Restriction (LDR) requirements. Formulations that resulted in LDR compliant waste forms are provided. The volume increases associated with cementation are also lower than anticipated. Future work will include verification studies with actual mixed radioactive waste as well as additional formulation development studies on other waste streams.

Phillips, J.A.; Semones, G.B.

1995-02-01T23:59:59.000Z

22

Evaluation of remedial alternatives for the Solar Ponds Plume, Rocky Flats Environmental Technology Site  

SciTech Connect

This paper describes the process used to select a remedial alternative for handling contaminated groundwater emanating from the Solar Evaporation Ponds (Solar Ponds) at the Rocky Flats Environmental Technology Site (RFETS) and prevent it from reaching the nearest surface water body, North Walnut Creek. Preliminary results of field investigations conducted to provide additional information for the alternatives analysis are also presented. The contaminated groundwater is referred to as the Solar Ponds Plume (SPP). The primary contaminants in the SPP are nitrate and uranium; however, some metals exceed the site action levels at several locations and volatile organic compounds, originating from other sources, also have been detected. Currently the SPP, local surface water runoff, and infiltrated precipitation are collected by a trench system located downgradient of the Solar Ponds and pumped to three storage tanks. The water (two to three million gallons annually) is then pumped to an on-site treatment plant for evaporation at an approximate cost of $7.57 per liter.

Hranac, K.C. [Morrison Knudsen Corp., Golden, CO (United States). Rocky Flats Environmental Technology Site; Chromec, F.W.; Fiehweg, R. [Rocky Mountain Remediation Services, Golden, CO (United States). Rocky Flats Environmental Technology Site; Hopkins, J. [Rocky Mountain Remediation Services, Los Alamos, NM (United States)

1998-07-01T23:59:59.000Z

23

A multispectral scanner survey of the Rocky Flats Environmental Technology Site and surrounding area, Golden, Colorado  

SciTech Connect

Aerial multispectral scanner imagery was collected of the Rocky Flats Environmental Technology Site in Golden, Colorado, on June 3, 5, 6, and 7, 1994, using a Daedalus AADS1268 multispectral scanner and coincident aerial color and color infrared photography. Flight altitudes were 4,500 feet (1372 meters) above ground level to match prior 1989 survey data; 2,000 feet (609 meters) above ground level for sitewide vegetation mapping; and 1,000 feet (304 meters) above ground level for selected areas of special interest. A multispectral survey was initiated to improve the existing vegetation classification map, to identify seeps and springs, and to generate ARC/INFO Geographic Information System compatible coverages of the vegetation and wetlands for the entire site including the buffer zone. The multispectral scanner imagery and coincident aerial photography were analyzed for the detection, identification, and mapping of vegetation and wetlands. The multispectral scanner data were processed digitally while the color and color infrared photography were manually photo-interpreted to define vegetation and wetlands. Several standard image enhancement techniques were applied to the multispectral scanner data to assist image interpretation. A seep enhancement was applied and a color composite consisting of multispectral scanner channels 11, 7, and 5 (thermal infrared, mid-infrared, and red bands, respectively) proved most useful for detecting seeps, seep zones, and springs. The predawn thermal infrared data were also useful in identifying and locating seeps. The remote sensing data, mapped wetlands, and ancillary Geographic Information System compatible data sets were spatially analyzed for seeps.

Brewster, S.B. Jr.; Brickey, D.W.; Ross, S.L.; Shines, J.E.

1997-04-01T23:59:59.000Z

24

The marriage of RCRA and CERCLA at the Rocky Flats Environmental Technology Site  

Science Conference Proceedings (OSTI)

A key goal of the Rocky Flats Cleanup Agreement (RFCA) signed in July of 1996 was to provide a seamless marriage of the Resource Conservation and Recovery Act (RCRA) (and other media specific programs) and the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) and the implementing agencies of each. This paper examines the two years since the signing of RFCA and identifies the successes, failures, and stresses of the marriage. RFCA has provided an excellent vehicle for regulatory and substantive progress at the Department of Energy`s Rocky Flats facility. The key for a fully successful marriage is to build on the accomplishments to date and to continually improve the internal and external systems and relationships. To date, the parties can be proud of both the substantial accomplishment of substantive environmental work and the regulatory systems that have enabled the work.

Shelton, D.C.; Brooks, L.M.

1998-11-01T23:59:59.000Z

25

Case History of a Clean Water Act Compliance Agreement at the Rocky Flats Environmental Technology Site near Golden, Colorado  

Science Conference Proceedings (OSTI)

A major Clean Water Act (CWA) Federal Facilities Compliance Agreement was signed on March 25, 1991 by the US Department of Energy, Rocky Flats Field Office (DOE, RFFO) and the Water Enforcement Division of the Environmental Protection Agency (EPA), Region VIII. The agreement revised the Rocky Flats Plant`s National Pollutant Discharge Elimination System (NPDES) permit and arose from pemittee-requested changes in effluent monitoring points and permit violations, most notably the February 22, 1989 Chromic Acid Incident. The Rocky Flats Plant, now called the Rocky Flats Environmental Technology Site (Site) near Golden Colorado was operated at that time by Rockwell International Corporation, who later plead guilty to six misdemeanor and felony counts of the CWA (the aforementioned NPDES permit violations) and paid a $4 million fine on March 26, 1992. The Compliance Agreement, hereafter referred to as the NPDES FFCA, called for three separate remedial action plans and contained a schedule for their submittal to the EPA. The compliance plans focussed on: (1) Waste Water Treatment Plant (WWTP) performance upgrades, (2) source control and surface water protection, and (3) characterization of the impacts from past sludge disposal practices. Projects that implemented the compliance plans were initiated soon after submittal to the EPA and are forecast to complete in 1997 at a total cost of over $35 million. This paper presents a case history of NPDES FFCA compliance projects and highlights the successes, failures, and lessons learned.

Thompson, J.S.

1995-08-01T23:59:59.000Z

26

Disposition of Uranium -233 (sup 233U) in Plutonium Metal and Oxide at the Rocky Flats Environmental Technology Site  

Science Conference Proceedings (OSTI)

This report documents the position that the concentration of Uranium-233 ({sup 233}U) in plutonium metal and oxide currently stored at the DOE Rocky Flats Environmental Technology Site (RFETS) is well below the maximum permissible stabilization, packaging, shipping and storage limits. The {sup 233}U stabilization, packaging and storage limit is 0.5 weight percent (wt%), which is also the shipping limit maximum. These two plutonium products (metal and oxide) are scheduled for processing through the Building 371 Plutonium Stabilization and Packaging System (PuSPS). This justification is supported by written technical reports, personnel interviews, and nuclear material inventories, as compiled in the ''History of Uranium-233 ({sup 233}U) Processing at the Rocky Flats Plant In Support of the RFETS Acceptable Knowledge Program'' RS-090-056, April 1, 1999. Relevant data from this report is summarized for application to the PuSPS metal and oxide processing campaigns.

Freiboth, Cameron J.; Gibbs, Frank E.

2000-03-01T23:59:59.000Z

27

Report on "Audit of the Contractor Incentive Programs at the Rocky Flats Environmental Technology Site, IG-0411  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

August 13, 1997 MEMORANDUM FOR THE SECRETARY FROM: John C. Layton Inspector General SUBJECT: INFORMATION: Report on "Audit of the Contractor Incentive Programs at the Rocky Flats Environmental Technology Site" BACKGROUND: The Department of Energy (Department) is using performance-based contracts to solve problems associated with its traditional management and operating contracts. These performance-based contracts are to include cost reduction incentive programs to motivate contractors to reduce costs by employing innovative practices. Additionally, these contracts are to encourage and reward superior, results-oriented performance through a clearly

28

Implementation of Revision 19 of the TRUPACT-II Safety Analysis Report at Rocky Flats Environmental Technology Site  

Science Conference Proceedings (OSTI)

The U.S. Nuclear Regulatory Commission on July 27, 2001 approved Revision 19 of the TRUPACT-II Safety Analysis Report (SAR) and the associated TRUPACT-II Authorized Methods for Payload Control (TRAMPAC). Key initiatives in Revision 19 included matrix depletion, unlimited mixing of shipping categories, a flammability assessment methodology, and an alternative methodology for the determination of flammable gas generation rates. All U.S. Department of Energy (DOE) sites shipping transuranic (TRU) waste to the Waste Isolation Pilot Plant (WIPP) were required to implement Revision 19 methodology into their characterization and waste transportation programs by May 20, 2002. An implementation process was demonstrated by the Rocky Flats Environmental Technology Site (RFETS) in Golden, Colorado. The three-part process used by RFETS included revision of the site-specific TRAMPAC, an evaluation of the contact-handled TRU waste inventory against the regulations in Revision 19, and design and development of software to facilitate future inventory analyses.

D'Amico, E.; O'Leary, J.; Bell, S.; Djordjevic, S.; Givens, C,; Shokes, T.; Thompson, S.; Stahl, S.

2003-02-25T23:59:59.000Z

29

Rocky Flats Compliance Program; Technology summary  

SciTech Connect

The Department of Energy (DOE) established the Office of Technology Development (EM-50) (OTD) as an element of Environmental Restoration and Waste Management (EM) in November 1989. The primary objective of the Office of Technology Development, Rocky Flats Compliance Program (RFCP), is to develop altemative treatment technologies for mixed low-level waste (wastes containing both hazardous and radioactive components) to use in bringing the Rocky Flats Plant (RFP) into compliance with Federal and state regulations and agreements. Approximately 48,000 cubic feet of untreated low-level mixed waste, for which treatment has not been specified, are stored at the RFP. The cleanup of the Rocky Flats site is driven by agreements between DOE, the Environmental Protection Agency (EPA), and the Colorado Department of Health (CDH). Under these agreements, a Comprehensive Treatment and Management Plan (CTMP) was drafted to outline the mechanisms by which RFP will achieve compliance with the regulations and agreements. This document describes DOE`s strategy to treat low-level mixed waste to meet Land Disposal Restrictions and sets specific milestones related to the regulatory aspects of technology development. These milestones detail schedules for the development of technologies to treat all of the mixed wastes at the RFP. Under the Federal Facilities Compliance Act (FFCA), the CTMP has been incorporated into Rocky Flats Plant Conceptual Site Treatment Plan (CSTP). The CSTP will become the Rocky Flats Plant site Treatment Plan in 1995 and will supersede the CTMP.

NONE

1994-02-01T23:59:59.000Z

30

X-ray absorption fine structure spectroscopic determination of plutonium speciation at the Rocky Flats environmental technology  

SciTech Connect

X-ray Absorption Fine Structure spectroscopy was used to probe the speciation of the ppm level Pu in thirteen soil and concrete samples from the Rocky Flats Environmental Technology Site in support of the site remediation effort that has been successfully completed since these measurements. In addition to X-ray Absorption Near Edge Spectra, two of the samples yielded Extended X-ray Absorption Fine Structure spectra that could be analyzed by curve-fits. Most of these spectra exhibited features consistent with PU(IV), and more specificaJly, PuO{sub 2+x}-type speciation. Two were ambiguous, possibly indicating that Pu that was originally present in a different form was transforming into PuO{sub 2+x}, and one was interpreted as demonstrating the presence of an unusual Pu(VI) compound, consistent with its source being spills from a PUREX purification line onto a concrete floor and the resultant extreme conditions. These experimental results therefore validated models that predicted that insoluble PuO{sub 2+x} would be the most stable form of Pu in equilibrium with air and water even when the source terms were most likely Pu metal with organic compounds or a Pu fire. A corollary of these models' predictions and other in situ observations is therefore that the minimal transport of Pu that occurred on the site was via the resuspension and mobilization of colloidal particles. Under these conditions, the small amounts of diffusely distributed Pu that were left on the site after its remediation pose only a negligible hazard.

Lezama-pacheco, Juan S [Los Alamos National Laboratory; Conradson, Steven D [Los Alamos National Laboratory; Clark, David L [Los Alamos National Laboratory

2008-01-01T23:59:59.000Z

31

HOW THE ROCKY FLATS ENVIRONMENTAL TECHNOLOGY SITE DEVELOPED A NEW WASTE PACKAGE USING A POLYUREA COATING THAT IS SAFELY AND ECONOMICALLY ELIMINATING SIZE REDUCTION OF LARGE ITEMS  

SciTech Connect

One of the major challenges involved in closing the Rocky Flats Environmental Technology Site (RFETS) is the disposal of extremely large pieces of contaminated production equipment and building debris. Past practice has been to size reduce the equipment into pieces small enough to fit into approved, standard waste containers. Size reducing this equipment is extremely expensive, and exposes workers to high-risk tasks, including significant industrial, chemical, and radiological hazards. RFETS has developed a waste package using a Polyurea coating for shipping large contaminated objects. The cost and schedule savings have been significant.

Dorr, Kent A.; Hogue, Richard S.; Kimokeo, Margaret K.

2003-02-27T23:59:59.000Z

32

Integrating Volume Reduction and Packaging Alternatives to Achieve Cost Savings for Low Level Waste Disposal at the Rocky Flats Environmental Technology Site  

Science Conference Proceedings (OSTI)

In order to reduce costs and achieve schedules for Closure of the Rocky Flats Environmental Technology Site (RFETS), the Waste Requirements Group has implemented a number of cost saving initiatives aimed at integrating waste volume reduction with the selection of compliant waste packaging methods for the disposal of RFETS low level radioactive waste (LLW). Waste Guidance Inventory and Shipping Forecasts indicate that over 200,000 m3 of low level waste will be shipped offsite between FY2002 and FY2006. Current projections indicate that the majority of this waste will be shipped offsite in an estimated 40,000 55-gallon drums, 10,000 metal and plywood boxes, and 5000 cargo containers. Currently, the projected cost for packaging, shipment, and disposal adds up to $80 million. With these waste volume and cost projections, the need for more efficient and cost effective packaging and transportation options were apparent in order to reduce costs and achieve future Site packaging a nd transportation needs. This paper presents some of the cost saving initiatives being implemented for waste packaging at the Rocky Flats Environmental Technology Site (the Site). There are many options for either volume reduction or alternative packaging. Each building and/or project may indicate different preferences and/or combinations of options.

Church, A.; Gordon, J.; Montrose, J. K.

2002-02-26T23:59:59.000Z

33

LM Records Handling System (LMRHS01) - Rocky Flats Environmental...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

here Home LM Records Handling System (LMRHS01) - Rocky Flats Environmental Records Database, Office of Legacy Management LM Records Handling System (LMRHS01) - Rocky Flats...

34

Argonne TDC: Environmental Technologies  

Emergency Response. Engineering. Environmental Research. Fuel Cells. Imaging Technology. Material Science. Nanotechnology. Physical Sciences. Sensor ...

35

Rocky Flats Plant Site Environmental Report: 1993 Highlights  

Science Conference Proceedings (OSTI)

The Rocky Flats Plant Site Environmental Report provides summary information on the plant`s environmental monitoring programs and the results recorded during 1993. The report contains a compliance summary, results of environmental monitoring and other related programs, a review of environmental remediation activities, information on external gamma radiation dose monitoring, and radiation dose estimates for the surrounding population. This section provides an overview of these topics and summarizes more comprehensive discussions found in the main text of this annual report.

Not Available

1993-12-31T23:59:59.000Z

36

Audit of the Contractor Incentive Programs at the Rocky Flats...  

NLE Websites -- All DOE Office Websites (Extended Search)

at the Rocky Flats Environmental Technology Site, IG-0411 Audit of the Contractor Incentive Programs at the Rocky Flats Environmental Technology Site, IG-0411 Report on "Audit...

37

Environmental Survey preliminary report, Rocky Flats Plant, Golden, Colorado  

SciTech Connect

This report presents the preliminary findings of the Environmental Survey of the United States Department of Energy (DOE), Rocky Flats Plant (RFP), conducted August 11 through 22, 1986. The Survey is being conducted by an multidisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team members are outside experts supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the RFP. The Survey covers all environmental media and all areas of environmental regulations. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data observations of the operations carried on at RFP, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain environmental problems identified during its on-site activates. The Sampling and Analysis Plan is being executed by DOE's Oak Ridge National Laboratory. When completed, the results will be incorporated into the RFP Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the RFP Survey. 75 refs., 24 figs., 33 tabs.

Not Available

1987-06-01T23:59:59.000Z

38

HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY  

SciTech Connect

The programming and website for the advanced Technology Information System (TIS) have been completed. Over and above the LSDDP-TIS, the new system provides information on DOE's baseline technologies, technology data contained in DOE's databases, technologies assessed at FIU-HCET Technology Assessment Program (TAP), as well as links to other selected D&D sites with valuable technology information. The new name for the website is Gateway for Environmental Technology (GET). A super-vacuum type blasting system was tested for decontamination of 12-in pipe internal surfaces. The system operates on compressed air and propels grit media at high speed at wall surfaces. It is equipped with a vacuum system for collecting grit, dust, and debris. This technology was selected for further development. The electret ion chamber (EIC) system for measurement of alpha contamination on surfaces has been calibrated and is ready for demonstration and deployment. FIU-HCET is working with representatives from Fernald, Oak Ridge, Rocky Flats, and Savannah River to procure a demonstration and deployment site. Final arrangements are ongoing for the mock-up design for the glove box and tank size reduction technology assessments, including designing of support bases for tanks, a piping support system, and a mobilization plan for glove boxes and tanks from storage site to the PermaCon.

M.A. Ebadian

1999-05-31T23:59:59.000Z

39

HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY  

SciTech Connect

The programming and website for the advanced Technology Information System (TIS) have been completed. Over and above the LSDDP-TIS, the new system provides information on DOE's baseline technologies, technology data contained in DOE's databases, technologies assessed at FIU-HCET Technology Assessment Program (TAP), as well as links to other selected D&D sites with valuable technology information. The new name for the website is Gateway for Environmental Technology (GET). A super-vacuum type blasting system was tested for decontamination of 12-in pipe internal surfaces. The system operates on compressed air and propels grit media at high speed at wall surfaces. It is equipped with a vacuum system for collecting grit, dust, and debris. This technology was selected for further development. The electret ion chamber (EIC) system for measurement of alpha contamination on surfaces has been calibrated and is ready for demonstration and deployment. FIU-HCET is working with representatives from Fernald, Oak Ridge, Rocky Flats, and Savannah River to procure a demonstration and deployment site. Final arrangements are ongoing for the mock-up design for the glove box and tank size reduction technology assessments, including designing of support bases for tanks, a piping support system, and a mobilization plan for glove boxes and tanks from storage site to the PermaCon.

M.A. Ebadian

1999-05-31T23:59:59.000Z

40

Flat-Plate Photovoltaic Performance Testing at the Solar Technology Acceleration Center (SolarTAC)  

Science Conference Proceedings (OSTI)

The flat-plate photovoltaic (PV) performance testing project at the Solar Technology Acceleration Center (SolarTAC) is a multi-year, data-driven effort to provide unbiased field testing of a variety of commercial-scale solar PV systems under different environmental and seasonal conditions. Its core aim is to assess and characterize the operation of both well-established as well as less mature PV module technologies to ultimately inform future PV product investment decisions by electric utilities and ...

2013-10-30T23:59:59.000Z

Note: This page contains sample records for the topic "flats environmental technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

2, No. 2 http:eetd.lbl.govnewsletternl45 Environmental Energy Technologies Division News http:eetd.lbl.govnewsletter 2013 Environmental Energy Technologies Division...

42

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

1, No. 1 http:eetd.lbl.govnewsletternl40 Environmental Energy Technologies Division News http:eetd.lbl.govnewsletter 2012 Environmental Energy Technologies Division...

43

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

1, No. 2 http:eetd.lbl.govnewsletternl41 Environmental Energy Technologies Division News http:eetd.lbl.govnewsletter 2012 Environmental Energy Technologies Division...

44

BNL | Environmental Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

Environmental Technology Environmental Technology Meteorological Services (Met Services) is responsible for the maintenance, calibration, data collection and data archiving for the weather instrumentation network associated with atmospheric dispersion concerns for BNL. This includes measuring wind speed, wind direction, temperature, rainfall, barometric pressure and relative humidity. Wind speed, wind direction and temperature are measured at 85 meters, 50 meters and at 10 meters. Rainfall, relative humidity and barometric pressure are taken at the 2 meter height. The 85-meter (280-ft.) meteorological tower, placed in operation in May 1981, is located in an open field west of the majority of the Brookhaven building complex at latitude 40052.20'N and longitude 72°53.35'W and its base is 24 m (80 ft.) above sea level.

45

Environmental Justice and Public Participation Through Technology...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Environmental Justice and Public Participation Through Technology- Building Community Capacity Environmental Justice and Public Participation Through Technology- Building Community...

46

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

Editor's Note: This special issue of EETD News examines the California energy crisis of 2001, and research and development underway at the Environmental Energy Technologies...

47

Rocky Flats Plant Site Environmental Report for 1992  

Science Conference Proceedings (OSTI)

The Rocky Rats Plant Site Environmental Report provides summary information on the plant`s environmental monitoring programs and the results recorded during 1992. The report contains a compliance summary, results of environmental monitoring and other related programs, a review of environmental remediation activities, information on external gamma radiation dose monitoring, and radiation dose estimates for the surrounding population.

Cirrincione, D.A.; Erdmann, N.L. [eds.

1992-12-31T23:59:59.000Z

48

PNNL: Available Technologies: Environmental  

Current Control Technology for Quantum Cascade Laser and Other Applications; Dynamic Measurement of Hydraulic Parameters Under Liquid Unsaturated Flow ...

49

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

9, No. 1 [http://eetd.lbl.gov/newsletter/nl32/] 9, No. 1 [http://eetd.lbl.gov/newsletter/nl32/] Environmental Energy Technologies Division News [http://eetd.lbl.gov/newsletter/] © 2010 Environmental Energy Technologies Division [http://eetd.lbl.gov/] E.O. Lawrence Berkeley National Laboratory [http://www.lbl.gov/] Disclaimer [http://www.lbl.gov/Disclaimers.html] SUMMER NEWSLETTER: VOL. 9, NO. 1 Ashok Gadgil Named Director of Environmental Energy Technologies Division Arsenic Removal Technologies ARPA-E Funding Low-Energy Buildings User Facility ECMA International Standard U.S. Wind Power Market Clean Energy Ministerial Research Highlights Sources and Credits A new Division Director for the Environmental Energy Technologies Division of Lawrence Berkeley National Laboratory, a story about one of his research team's projects to remove naturally-

50

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

Consumers Kept Consumers Kept the Lights On Lawrence Berkeley National Laboratory Atmospheric Sciences Advanced Technologies Building Technologies Energy Analysis Indoor Environment Vol. 3 No. 4 News 1 California Consumers Kept the Lights On 3 A Quick and Easy Web-Based Assess- ment Tool for Day/Electric Lighting 5 Berkeley Lab Model Tracks Indoor Anthrax Dispersal 7 Rating "Green" Laboratories-Labs21 Environmental Performance Criteria 9 Research Highlights The mission of the Environmental Energy Technologies Division is to perform research and development leading to better energy technologies and the reduction of adverse energy- related environmental impacts. Environmental Energy Technologies Division continued on page 2 In this Issue C alifornia consumers-not mild weather or the cooling economy-should get credit

51

Telephone Flat Geothermal Development Project Environmental Impact Statement Environmental Impact Report. Final: Comments and Responses to Comments  

SciTech Connect

This document is the Comments and Responses to Comments volume of the Final Environmental Impact Statement and Environmental Impact Report prepared for the proposed Telephone Flat Geothermal Development Project (Final EIS/EIR). This volume of the Final EIS/EIR provides copies of the written comments received on the Draft EIS/EIR and the leady agency responses to those comments in conformance with the requirements of the National Environmental Policy Act (NEPA) and the California Environmental Quality Act (CEQA).

None

1999-02-01T23:59:59.000Z

52

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

Containing the Effects of Containing the Effects of Chemical and Biological Agents in Buildings Lawrence Berkeley National Laboratory Air Quality Advanced Technologies Building Technologies Energy Analysis Indoor Environment Vol. 3 No. 3 News 1 Containing the Effects of Chemical and Biological Agents in Buildings 3 Laser Ultrasonic Sensor Streamlines Papermaking Process 5 Building a Smarter Light: The IBECS Network/Ballast Interface 6 IPMVP-from a DOE-Funded Iniative to a Not-for-Profit Organization 8 Skylight Well Reduces Solar Heat Gain 9 Research Highlights The mission of the Environmental Energy Technologies Division is to perform research and development leading to better energy technologies and the reduction of adverse energy- related environmental impacts. Environmental Energy Technologies Division

53

Unique process combination decontaminates mixed wastewater at Rocky Flats  

Science Conference Proceedings (OSTI)

This paper describes the Sitewide Water Treatment Facility (SWTF) used to process environmental remediation wastewaters found at the Rocky Flats Environmental Technology Site.

Kelso, William J.; Cirillo, J. Russ

1999-08-01T23:59:59.000Z

54

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

8, No. 4 [http://eetd.lbl.gov/newsletter/nl31/] 8, No. 4 [http://eetd.lbl.gov/newsletter/nl31/] Environmental Energy Technologies Division News [http://eetd.lbl.gov/newsletter/] © 2010 Environmental Energy Technologies Division [http://eetd.lbl.gov/] E.O. Lawrence Berkeley National Laboratory [http://www.lbl.gov/] Disclaimer [http://www.lbl.gov/Disclaimers.html] SPRING NEWSLETTER: VOL. 8, NO. 4 OpenADR's Steps Toward a National Smart Grid Standard Dangers of Third-Hand Smoke Energy Efficiency Workforce Training John Newman Wins the Acheson Award Net Metered PV Systems Recovery Act Grant Program Evaluation Sources and Credits As the nation continues moving toward a more energy-efficient economy, research at the Environmental Energy Technologies Division plays its part in developing the technologies it needs for the Smart Grid, and in evaluating policies aimed at increasing energy efficiency

55

Rocky Flats resumes shipments to WIPP  

NLE Websites -- All DOE Office Websites (Extended Search)

of Energy (DOE) has resumed transuranic radioactive waste shipments from DOE's Rocky Flats Environmental Technology Site (RFETS) to the Waste Isolation Pilot Plant (WIPP). A...

56

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

0: 0: Vol. 9, No. 1 Ashok Gadgil Named Director of Environmental Energy Technologies Division Arsenic Removal Technologies ARPA-E Funding Low-Energy Buildings User Facility ECMA International Standard U.S. Wind Power Market Clean Energy Ministerial Research Highlights Sources and Credits PDF of EETD News Ashok Gadgil Named New EETD Director Ashok Gadgil Ashok Gadgil has been named Director of Lawrence Berkeley National Laboratory's (Berkeley Lab's) Environmental Energy Technologies Division (EETD). Serving as the Acting Division Director since October, he replaces Arun Majumdar who is now Director of the DOE's Advanced Research Projects Agency-Energy (ARPA-E). Gadgil is a Professor in Civil and Environmental Engineering at UC Berkeley and joined EETD in 1988. He is recognized for

57

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

9, No. 2 [http://eetd.lbl.gov/newsletter/nl33/] 9, No. 2 [http://eetd.lbl.gov/newsletter/nl33/] Environmental Energy Technologies Division News [http://eetd.lbl.gov/newsletter/] © 2010 Environmental Energy Technologies Division [http://eetd.lbl.gov/] E.O. Lawrence Berkeley National Laboratory [http://www.lbl.gov/] Disclaimer [http://www.lbl.gov/Disclaimers.html] FALL NEWSLETTER: VOL. 9, NO. 2 Driving Demand Bennett-Nordman IEEE Standard Nicotine and Ozone SVOW Renewables Portfolio Standard Report Kerosene Lamp Particulate Study Research Highlights Sources and Credits New ways of convincing homeowners of the benefits of energy efficiency improvements to their homes-and new language to use in discussing these benefits-is discussed in a report titled "Driving Demand" from Environmental Energy Technologies Division researchers. This issue also

58

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

2, No. 1 [http://eetd.lbl.gov/newsletter/nl44/] 2, No. 1 [http://eetd.lbl.gov/newsletter/nl44/] Environmental Energy Technologies Division News [http://eetd.lbl.gov/newsletter/] ©2013 Environmental Energy Technologies Division [http://eetd.lbl.gov/] E.O. Lawrence Berkeley National Laboratory [http://www.lbl.gov/] Disclaimer [http://www.lbl.gov/Disclaimers.html] SUMMER 2013: VOL. 12, NO. 1 Buildings Performance Database EnergyIQ Wind Technologies Report Lighting Testbeds Q&A with Ed Vine SEAD Report - India Efficient A/C Li/S Cathode Technology Conductive Binder for Li-ion Batteries Research Highlights Sources and Credits We cover a lot of ground in the issue of EETD News you're now reading. Investing in energy performance upgrades for your commercial building? Read about the Building Performance Database. Wondering about the state of wind power in the U.S.? We've got you covered with the

59

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

0, No. 2 [http://eetd.lbl.gov/newsletter/nl37/] 0, No. 2 [http://eetd.lbl.gov/newsletter/nl37/] Environmental Energy Technologies Division News [http://eetd.lbl.gov/newsletter/] © 2011 Environmental Energy Technologies Division [http://eetd.lbl.gov/] E.O. Lawrence Berkeley National Laboratory [http://www.lbl.gov/] Disclaimer [http://www.lbl.gov/Disclaimers.html] FALL 2011: VOL. 10, NO. 2 Carbon Cycle 2.0 Analysis Team Carbon Sequestration Study Materials Genome Project Increased Building Ventilation VOC Cleaning Technology Fort Irwin Lighting Testbed Tracking the Sun IV Cool Coatings for Cars Research Highlights Sources and Credits Understanding how effectively new technologies can save energy, water, and materials-as well as reduce energy costs and greenhouse gas emissions-is the goal of the Carbon Cycle 2.0 Energy and

60

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

1: 1: Vol. 10, No. 2 Carbon Cycle 2.0 Analysis Team Carbon Sequestration Study Materials Genome Project Increased Building Ventilation VOC Cleaning Technology Fort Irwin Lighting Testbed Tracking the Sun IV Cool Coatings for Cars Research Highlights Sources and Credits PDF of EETD News Carbon Cycle 2.0 Energy and Environmental Analysis Team Evaluates Impacts of Technology R&D It's a grand challenge: develop clean, sustainable technologies that deliver a low-carbon energy future, and through innovation create jobs, new markets, and exports while increasing America's energy security. Researchers at Lawrence Berkeley National Laboratory (Berkeley Lab) have made it their mission to develop low-carbon and energy-efficient technologies such as advanced materials and information technology for

Note: This page contains sample records for the topic "flats environmental technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

1, No. 4 [http://eetd.lbl.gov/newsletter/nl43/] 1, No. 4 [http://eetd.lbl.gov/newsletter/nl43/] Environmental Energy Technologies Division News [http://eetd.lbl.gov/newsletter/] ©2013 Environmental Energy Technologies Division [http://eetd.lbl.gov/] E.O. Lawrence Berkeley National Laboratory [http://www.lbl.gov/] Disclaimer [http://www.lbl.gov/Disclaimers.html] SPRING 2013: VOL. 11, NO. 4 Deep Energy Retrofits Health-Based Ventilation Standard-Interview with Max Sherman Energy-Efficient School Districts Guide Nanometer Laser-Based Chemical Sensing Demand-to-Grid Lab Research Highlights Sources and Credits Research that examines how homes can save 70 percent or more of their energy use is this issue's cover story. EETD researchers studied several northern California homes whose owners implemented their own plans to make extreme reductions in energy consumption and found that

62

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

9, No. 3 [http://eetd.lbl.gov/newsletter/nl34/] 9, No. 3 [http://eetd.lbl.gov/newsletter/nl34/] Environmental Energy Technologies Division News [http://eetd.lbl.gov/newsletter/] © 2011 Environmental Energy Technologies Division [http://eetd.lbl.gov/] E.O. Lawrence Berkeley National Laboratory [http://www.lbl.gov/] Disclaimer [http://www.lbl.gov/Disclaimers.html] WINTER NEWSLETTER: VOL. 9, NO. 3 Commercial Buildings Clean Energy Research Center OpenADR Alliance Energy Efficient Data Center Retrofit Home Energy Score Pilot Program Tracking the Sun III Research Highlights Sources and Credits The Department of Energy's Commercial Building Partnerships initiative is establishing collaborations to increase energy efficiency in new and existing commercial buildings. It teams National Laboratory researchers and private technical experts with commercial building owners and

63

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

2: Vol. 10, No. 3 [http://eetd.lbl.gov/newsletter/nl38/] 2: Vol. 10, No. 3 [http://eetd.lbl.gov/newsletter/nl38/] Environmental Energy Technologies Division News [http://eetd.lbl.gov/newsletter/] © 2012 Environmental Energy Technologies Division [http://eetd.lbl.gov/] E.O. Lawrence Berkeley National Laboratory [http://www.lbl.gov/] Disclaimer [http://www.lbl.gov/Disclaimers.html] WINTER 2012: VOL. 10, NO. 3 Middle-Income Energy Savings LIGTT Greenhouse Gas Standards Port of Oakland Study Ashok Gadgil Wins Zayed Award Max Tech Research Highlights Sources and Credits Congratulations to EETD Division Director Ashok Gadgil, winner of the Zayed Future Energy Prize lifetime achievement award, about which you can read in this issue. We also present research on how energy efficiency program managers can better reach middle-income families, and perhaps

64

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

2011: Vol. 10, No. 1 [http://eetd.lbl.gov/newsletter/nl36/] 2011: Vol. 10, No. 1 [http://eetd.lbl.gov/newsletter/nl36/] Environmental Energy Technologies Division News [http://eetd.lbl.gov/newsletter/] © 2011 Environmental Energy Technologies Division [http://eetd.lbl.gov/] E.O. Lawrence Berkeley National Laboratory [http://www.lbl.gov/] Disclaimer [http://www.lbl.gov/Disclaimers.html] SUMMER 2011: VOL. 10, NO. 1 Energy Information Systems ISO 50001 BEST Dairy Benchmarking Program Wind Power Report Cool Roofs Workshop Research Highlights Sources and Credits In this issue, you can learn about EETD's work to analyze energy information systems (EIS) and improve their utilization in commercial buildings. We also look at ISO 50001, a new standard that helps industrial and commercial enterprises operate energy-efficiently,

65

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

8, No. 3 [http://eetd.lbl.gov/newsletter/nl30/] 8, No. 3 [http://eetd.lbl.gov/newsletter/nl30/] Environmental Energy Technologies Division News [http://eetd.lbl.gov/newsletter/] © 2010 Environmental Energy Technologies Division [http://eetd.lbl.gov/] E.O. Lawrence Berkeley National Laboratory [http://www.lbl.gov/] Disclaimer [http://www.lbl.gov/Disclaimers.html] WINTER NEWSLETTER: VOL. 8, NO. 3 Hidden Costs of Energy Production NRC Report The Rosenfeld Named After California's Godfather of Energy Solar Photovoltaic Report II Release Methane in Central California Wind Power Property Values Community Wind FABS21 Release Franchise Tax Board Data Center Project Sources and Credits This issue addresses everything from a National Academy of Sciences report on the hidden costs of energy production to tools for making semiconductor fabrication facilities and data centers more

66

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

9, No. 4 [http://eetd.lbl.gov/newsletter/nl35/] 9, No. 4 [http://eetd.lbl.gov/newsletter/nl35/] Environmental Energy Technologies Division News [http://eetd.lbl.gov/newsletter/] © 2011 Environmental Energy Technologies Division [http://eetd.lbl.gov/] E.O. Lawrence Berkeley National Laboratory [http://www.lbl.gov/] Disclaimer [http://www.lbl.gov/Disclaimers.html] SPRING 2011: VOL. 9, NO. 4 Fuel Cell Research Programmable Thermostats A Bright Spot for Solar Saving Electricity in a Hurry Nanostructured Antifogging Coatings Fluorescent Lighting Research Highlights Sources and Credits This month, EETD News highlights some of its research activities in fuel cells; an energy efficiency expert describes how Japan can save energy in a hurry to help offset supply losses from Fukushima; and a lighting expert discusses why fluorescent

67

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

8, No. 2 [http://eetd.lbl.gov/newsletter/nl29/] 8, No. 2 [http://eetd.lbl.gov/newsletter/nl29/] Environmental Energy Technologies Division News [http://eetd.lbl.gov/newsletter/] © 2009 Environmental Energy Technologies Division [http://eetd.lbl.gov/] E.O. Lawrence Berkeley National Laboratory [http://www.lbl.gov/] Disclaimer [http://www.lbl.gov/Disclaimers.html] FALL NEWSLETTER: VOL. 8, NO. 2 Closing in on Zero-Energy Buildings Heinz Award Honors Berkeley Lab's Ashok Gadgil Green Chemistry: Lasers Detect Explosives and Hazardous Waste Photocatalytic Oxidation (PCO) Air Cleaners: Reducing Energy Use While Clearing the Air Energy Reduction for Energy Research New Study Sheds Light on the Growing U.S. Wind Power Market Recovery Act Funding Enables Berkeley Lab to Help Federal Agencies Improve Energy Efficiency Research

68

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

11, No. 3 [http://eetd.lbl.gov/newsletter/nl42/] 11, No. 3 [http://eetd.lbl.gov/newsletter/nl42/] Environmental Energy Technologies Division News [http://eetd.lbl.gov/newsletter/] ©2013 Environmental Energy Technologies Division [http://eetd.lbl.gov/] E.O. Lawrence Berkeley National Laboratory [http://www.lbl.gov/] Disclaimer [http://www.lbl.gov/Disclaimers.html] WINTER 2013: VOL. 11, NO. 3 The New York Times Building Building Control Virtual Test Bed Simergy Climate Change and the Insurance Industry Energy Storage Research Hub ARPA-E Funds Berkeley Lab Projects Utility Energy-Efficiency Programs California's Energy Future FLEXLAB Testbeds Construction FLEXLAB Partners Research Highlights Sources and Credits Better tools to simulate building energy use, new funding for advanced research in batteries and energy-efficient

69

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

fi lter could also help fi lter could also help California comply with tighter U.S. EPA arsenic drinking-water standard. A shok G ad g i l, a s c ient i st i n t he Environmental Energy Technologies Division at Lawrence Berkeley National Laboratory (Berkeley Lab), is developing a cheap and effective way to provide safe drinking water to 60 million Bangladeshis who live with the threat of arsenic poisoning.

70

Environmental Justice and Public Participation Through Technology...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Through Technology- Building Community Capacity Environmental Justice and Public Participation Through Technology- Building Community Capacity The U.S. Department of Energy (DOE)...

71

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

A Q&A with Cindy Regnier, Manager of the Facility for Low-Energy A Q&A with Cindy Regnier, Manager of the Facility for Low-Energy eXperiments in Buildings (FLEXLAB) The Facility for Low-Energy eXperiments in Buildings (FLEXLAB) is designed to be a national focal point for developing, simulating, and testing energy-efficient technologies and strategies for buildings. FLEXLAB users will conduct research and develop technologies at FLEXLAB on single components as well as whole-building integrated design and operation. This research is aimed at substantially lowering the energy use, and improving the comfort and performance, of both new and existing buildings. FLEXLAB is a facility of Lawrence Berkeley National Laboratory's Environmental Energy Technologies Division (EETD). Artist's conception of a portion of the FLEXLAB facility

72

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

5: 5: Vol. 6, No. 2 Electricity Prices and the Tariff Analysis Project (TAP) Reducing Developing World's Polluting Fuel-Based Lighting United Nations World Environment Day June 1-5, 2005 First Energy-Efficient, LED-Based Task Lamp Brought to Market BEST Winery Tool Helps Reduce Energy and Water Costs Energy-saving Paper Sensor Passes Major Milestone Technology Transfer Research Highlights Sources and Credits PDF of EETD News TAP logo Electricity Prices and the Tariff Analysis Project (TAP) Much of the work done in the Environmental Energy Technologies Division (EETD) at Lawrence Berkeley National Laboratory (Berkeley Lab) involves analyzing the costs and benefits of energy-saving technologies and energy-efficiency measures. For the consumer, who pays to implement these

73

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

1 1 Understanding the Indoor Concentrations of Outdoor Aerosols in Residences 3 EETD Develops New Commercial Duct-Sealing Technology 4 Ultraclean Low-swirl Combustion Will Help Clear the Air 6 Functional Testing Guide Aids Building Teams 7 Motor System Optimiza- tion in China: Building a Model for Industrial Energy Efficiency 8 Capturing and Tracking Energy-Savings Project Goals with the Design Intent Tool 9 Microgrids: Reliable Power in a Small Package 10 Research Highlights continued on page 2 In this Issue In this Issue Lawrence Berkeley National Laboratory Atmospheric Sciences Advanced Technologies Building Technologies Energy Analysis Indoor Environment Summer 2003 Volume 4 Number 3 NEWS n 1997, the U.S. Environmental Protection Agency (EPA) issued new National Ambient Air Quality Standards for airborne particles less than

74

HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY  

Science Conference Proceedings (OSTI)

A vendor was selected for the diamond wire technology demonstration scheduled for this summer at Princeton Plasma Physics Laboratory (PPPL). A team consisting of personnel from FIU-HCET, PPPL, and AEA Technology reviewed the submitted bids. FIU-HCET will contract this vendor. At the SRS Ninth ICT teleconference, the ICT team discussed the status of the following demonstrations: LRAD; x-ray, K-edge; Strippable Coatings; Thermal Spray Vitrification; Cutting/Shearing/Dismantlement/Size Reduction; and Electrets. The LRAD demo is complete, and the x-ray/K-edge, Strippable Coatings, and Electrets demos are ongoing. The Asbestos and Thermal Spray Vitrification demos require more laboratory testing. The Cutting/Shearing/Dismantlement/Size Reduction demo is undergoing procurement. Five FIU-HCET staff members took the 1S0 14000 environmental auditor training course February 22-26, 1999, given by ASC. The test plan for the Facility Dismantlement Technology Assessment is finished and ready for internal review.

M.A. Ebadian

1999-03-30T23:59:59.000Z

75

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

1 Energy-Efficient Direct- Current Powering Technology 3 Laser Ultrasonic Sensor Wins R&D 100 5 Silver Anomalies in Jerusalem Pottery 7 GSA's Cool Coup at the Philadelphia Custom House 9 Tech Transfer Column 11 Research Highlights 12 Darfur Stoves Effort in PrRgress In this Issue In this Issue Researchers in the Lawrence Berkeley National Laboratory (Berkeley Lab) Environmental Energy Technologies Division (EETD) have teamed with Silicon Valley giants, including Sun Microsystems, Intel, and Cisco, to demonstrate technologies that could save billions of dollars a year in data center energy costs as well as improve data center reliability and lengthen equipment life. The demonstration took place this summer at a test facility at Sun Microsystems

76

Technology Characterizations. Environmental Information Handbook  

DOE Green Energy (OSTI)

The Environmental Handbook Series is designed to overcome the deficiency of information utility and transfer. Each of the works in this series brings together information in an area and format that is useful to both public and private sector needs. It is meant to serve as a basic reference document that will stand for a period of time and help to enrich decisionmaking and research in the interface of energy and the environment. This particular handbook deals with environmental characterization data for the energy technologies and presents the data in a format for use by DOE policy analysts. This treatment includes not only the actual information base, but also a preface which explains the present concept, the historical growth of the program, and the new direction for improved utility. The information base, itself, is constantly being enhanced and is republished periodically as necessary. The specific energy systems for which environmental/technology characterization information is provided are grouped as follows: nuclear energy; coal; petroleum; gas; synthetic fuels; solar energy; geothermal energy; and hydroelectricity.

Not Available

1980-06-01T23:59:59.000Z

77

Bion Environmental Technologies Inc | Open Energy Information  

Open Energy Info (EERE)

Bion Environmental Technologies Inc Bion Environmental Technologies Inc Jump to: navigation, search Name Bion Environmental Technologies Inc Place Old Bethpage, New York Zip 11804 Sector Biomass, Renewable Energy Product New York-based developer of livestock waste biomass technology and provider of waste remediation and renewable energy production to existing livestock operations. References Bion Environmental Technologies Inc[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Bion Environmental Technologies Inc is a company located in Old Bethpage, New York . References ↑ "Bion Environmental Technologies Inc" Retrieved from "http://en.openei.org/w/index.php?title=Bion_Environmental_Technologies_Inc&oldid=342855

78

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

2: 2: Vol. 3, No. 4 California Consumers Kept the Lights On Quick and Easy Web-Based Assessment Tool for Day/Electric Lighting Berkeley Lab Model Tracks Indoor Anthrax Dispersal Rating "Green" Laboratories-Labs21 Environmental Performance Criteria Research Highlights Sources and Credits PDF of EETD News California Consumers Kept the Lights On California consumers-not mild weather or the cooling economy-should get credit for avoiding blackouts and keeping the lights on in summer 2001 by embracing energy efficiency and conservation and reducing their peak demand by 3,000 to 5,500 megawatts (MW), according to research by scientists at the Environmental Energy Technologies Division. This is the conclusion reached in a new analysis of the consumer response

79

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

2000: 2000: Vol. 2, No. 2 EETD Study Explores Electricity Use of Office and Network Equipment EETD Researchers Form Network to Study Energy Use, Environmental Impacts of Information Technology In Memoriam-Joan Daisey The Fine XAD Sorbent Coating-2000 R&D 100 Award Winner Polymers Take Charge Hotel Survey Illuminates Energy Savings Research Highlights Sources and Credits PDF of EETD News EETD Study Explores Electricity Use of Office and Network Equipment How much electricity is used to power information technology in the U.S.? EETD's End-Use Energy Forecasting Group, led by Jonathan Koomey, has released a new study estimating office and network equipment energy use as of the end of 1999. The last major study examining energy consumption by this group of products was also conducted by this group and was published

80

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

new three-year public-private research initiative, which new three-year public-private research initiative, which will target substantial reductions in the $100 billion spent annually in energy costs for commercial buildings, has been launched under the leadership of Environmental Energy Technologies Division scientists. More than $13 million in research funding has been pledged by the California Energy Com- mission (CEC), the DOE, private sector partners, and Pacific Gas & Electric. EETD has assembled a team of 14 public and private sector partners to carry out the varied tasks within the High-Per- formance Commercial Buildings Systems Program. The program will develop new information technologies to design, commission, and operate buildings, and integrated design techniques to generate substantial and sustained energy savings

Note: This page contains sample records for the topic "flats environmental technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Environmental Assessment for the LGF Spill Test Facility at Frenchman Flat, Nevada Test Site  

Science Conference Proceedings (OSTI)

The LGF Spill Test Facility at Frenchman Flat, Nevada Test Site, is being constructed by the United States Department of Energy (DOE). In this Environmental Assessment, environmental consequences of spilling hazardous materials in the Frenchman Flat basin are evaluated and mitigations and recommendations are stated in order to protect natural resources and reduce land-use impacts. Guidelines and restrictions concerning spill-test procedures will be determined by the LGF Test Facility Operations Manager and DOE based on toxicity documentation for the test material, provided by the user, and mitigations imposed by the Environmental Assessment. In addition to Spill Test Facility operational procedures, certain assumptions have been made in preparation of this document: no materials will be considered for testing that have cumulative, long-term persistence in the environment; spill tests will consist of releases of 15 min or less; and sufficient time will be allowed between tests for recovery of natural resources. Geographic limits to downwind concentrations of spill materials were primarily determined from meteorological data, human occupational exposure standards to hazardous materials and previous spill tests. These limits were established using maximum spill scenarios and environmental impacts are discussed as worst case scenarios; however, spill-test series will begin with smaller spills, gradually increasing in size after the impacts of the initial tests have been evaluated.

Patton, S.E.; Novo, M.G.; Shinn, J.H.

1986-04-01T23:59:59.000Z

82

The Western Environmental Technology Office (WETO), Butte, Montana, technology summary  

SciTech Connect

This document has been prepared by the DOE Environmental Management (EM) Office of Technology Development (OTD) to highlight its research, development, demonstration, testing, and evaluation activities funded through the Western Environmental Technology Office (WETO) in Butte, Montana. Technologies and processes described have the potential to enhance DOE`s cleanup and waste management efforts, as well as improve US industry`s competitiveness in global environmental markets. WETO`s environmental technology research and testing activities focus on the recovery of useable resources from waste. Environmental technology development and commercialization activities will focus on mine cleanup, waste treatment, resource recovery, and water resource management. Since the site has no record of radioactive material use and no history of environmental contamination/remediation activities, DOE-EM can concentrate on performing developmental and demonstration activities without the demands of regulatory requirements and schedules. Thus, WETO will serve as a national resource for the development of new and innovative environmental technologies.

Not Available

1994-09-01T23:59:59.000Z

83

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

2001: 2001: Vol. 2, No. 4 The California Energy Crisis: A Brief Summary of Events The California Energy Crisis: Long-and Short-Term Solutions High-Performance Commercial Building Systems Supporting the Cool Roofs Standard Meteorology, Energy, and Air Quality High-Performance Fume Hood Reduces Energy Use 50% The New Berkeley Lamp Lights the Way to Energy Savings Two Web Sites Help Californians Save Energy Research Highlights Sources and Credits PDF of EETD News The California Energy Crisis: A Brief Summary of Events Editor's Note: This special issue of EETD News examines the California energy crisis of 2001, and research and development underway at the Environmental Energy Technologies Division of Lawrence Berkeley National Laboratory focused on helping to solve the crisis, both in the short and

84

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

ecent concern about the risks to human ecent concern about the risks to human health from airborne particulates such as those in diesel exhaust has motivated a group at the Environmental Energy Technologies Division to investigate the use of scattered polar- ized light. The goals are to characterize these particles and develop an instrument to measure these characteristics in real time. Having such an instrument can help regulatory authorities devel- op standards and monitor air quality. Airborne particulates, especially those less than 2.5 micrometers (µm) in diameter, are known to be a major human health risk. Diesel exhaust particles are principally in this size range; they are also a major source of reduced visibility in populated areas. California recently declared particulates in diesel exhaust a haz-

85

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

Data Center Energy Use: Truth versus Myth Data Center Energy Use: Truth versus Myth At the height of the electricity crisis of 2001, Californians were greeted over their morning coffee with headlines like: Digital Economy's Demand for Steady Power Strains Utilities Data Servers Crave Power: High-Tech Electricity Needs Amplify Crisis and Net Blamed as Crisis Roils California. One of the biggest misconceptions about the crisis was that the energy use of computers and other internet-related hardware played a significant role. But early in 2001, research by Jon Koomey of Berkeley Lab's Environmental Energy Technologies Division (EETD) showed that widely discussed estimates of the energy use of computer- and networking-related hardware were exaggerated. Koomey is leader of EETD's End-Use Energy Forecasting Group.

86

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

3: 3: Vol. 4, No. 3 Understanding the Indoor Concentrations of Outdoor Aerosols in Residences EETD Develops New Commercial Duct-Sealing Technology Ultraclean Low-swirl Combustion Will Help Clear the Air Functional Testing Guide Aids Buildings Teams Motor System Optimization in China: Building a Model for Industrial Energy Efficiency Capturing and Tracking Energy-Savings Project Goals with the Design Intent Tool Microgrids: Reliable Power in a Small Package Research Highlights Sources and Credits PDF of EETD News Understanding the Indoor Concentrations of Outdoor Aerosols in Residences In 1997, the U.S. Environmental Protection Agency (EPA) issued new National Ambient Air Quality Standards for airborne particles less than 2.5 mm in diameter (PM2.5). These standards are based on evidence of associations

87

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

Data Center Energy Efficiency Project Wins Best of California Award Data Center Energy Efficiency Project Wins Best of California Award A project to improve the energy efficiency of the State of California Franchise Tax Board's data center has won a "Best of California" Award from the Center for Digital Government. Geoffrey Bell, Energy Engineer at Lawrence Berkeley National Laboratory's Environmental Energy Technologies Division, led the project team. Two men standing in a data center. The research was funded by the California Energy Commission's Public Interest Energy Research (PIER) program, and other participants included Federspiel Controls, Inc., Emerson Network Power, and California's Department of General Services. The Franchise Tax Board (FTB) is the California agency responsible for collecting state taxes. Its 10,000-square-foot data center in Sacramento

88

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

Study Finds No Evidence of Residential Property Value Impacts Study Finds No Evidence of Residential Property Value Impacts Near U.S. Wind Turbines Lawrence Berkeley National Laboratory (Berkeley Lab) analyzed more than 50,000 home sales near 67 wind facilities in 27 counties across nine U.S. states, yet was unable to uncover any impacts to nearby home property values. "This is the second of two major studies we have conducted on this topic [the first was published in 2009-see below], and in both studies [using two different datasets] we find no statistical evidence that operating wind turbines have had any measureable impact on home sales prices," says Ben Hoen, the lead author of the new report. Hoen is a researcher in the Environmental Energy Technologies Division of Berkeley Lab. The new study used a number of sophisticated techniques to control for

89

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

1999: 1999: Vol. 1, No. 1 Characterizing Diesel Particle Exhaust Miscellaneous Electricity Use COMIS: An Interzonal Air-Flow Model GenOpt: A Generic Optimization Program News from the D.C. Office Around the Division The A-Team Report Sources and Credits PDF of EETD News Characterizing Diesel Particle Exhaust Recent concern about the risks to human health from airborne particulates such as those in diesel exhaust has motivated a group at the Environmental Energy Technologies Division to investigate the use of scattered polarized light. The goals are to characterize these particles and develop an instrument to measure these characteristics in real time. Having such an instrument can help regulatory authorities develop standards and monitor air quality. Airborne particulates, especially those less than 2.5

90

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

4: 4: Vol. 5, No. 4 Cool Colors Project: Improved Materials for Cooler Roofs BVAMP: Simplifying Assessment of Building Vulnerability NARAC Expands its Reach: Minimize Chemical-Biological Weapons Casualties How to Buy Green Power New Federal Efficiency Standards for Residential Furnaces and Boilers: EETD Researchers Estimate Potential Impacts Research Highlights Sources and Credits PDF of EETD News Cool Colors Project: Improved Materials for Cooler Roofs Drawing of a house with a cool roof Roofs and the rainbow of colors used in roofing materials are getting cooler and cooler, thanks to research by scientists in the Lawrence Berkeley National Laboratory (Berkeley Lab) Environmental Energy Technologies Division (EETD). The cooler roofs get, the more energy and money they save. A new research program in cool materials is developing the

91

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

0: 0: Vol. 9, No. 2 Driving Demand Bennett-Nordman IEEE Standard Nicotine and Ozone SVOW Renewables Portfolio Standard Report Kerosene Lamp Particulate Study Research Highlights Sources and Credits PDF of EETD News Homeowner Motivations for Energy Efficiency Improvements Driving Demand report cover Hundreds of millions of dollars in public money are supporting home energy efficiency improvements. Researchers at the Lawrence Berkeley National Laboratory's (Berkeley Lab) Environmental Energy Technologies Division (EETD) are helping to ensure that these funds have their maximum impact with a new report that examines what motivates homeowners to seek out home energy improvements. "Convincing millions of Americans to divert their time and resources into upgrading their homes to eliminate energy waste, avoid high utility bills,

92

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

rogress in understanding contaminant concentrations observed in remote locations requires the development of a computer simulation model that can link these con- centrations with long-range transport potential at a continental scale. Researchers at Trent University's Canadian Environmen- tal Modeling Center and Berkeley Lab's Environmental Energy Technologies Division are now developing such a model, the Berkeley-Trent North American contaminant fate model (BETR North America). BETR is a regionally segmented multi-compartment, continen- tal-scale, mass balance chemical fate model. The model's frame- work links contaminant fate models of individual regions that encompass a larger, spatially heterogeneous area. It models North America's environment as a group of 24 ecological regions with

93

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

Research Highlights Research Highlights Research Highlights Berkeley Lab Researchers Share in 2013 Supercomputing Award International Supercomputing Conference In June, at the International Scientific Computing Conference in Leipzig, Germany, the German Gauss Center for Supercomputing bestowed its 2013 Gauss Award to a paper titled "TUE, A New Energy-Efficiency Metric Applied at ORNL's Jaguar." Authors of the paper included Environmental Energy Technologies Division researchers William Tschudi and Henry Coles, along with other Members of the Energy Efficient High Performance Computing Working Group (EE HPC WG): Michael K. Patterson (Intel), Stephen W. Poole, Chung-Hsing Hsu, and Don Maxwell (Oak Ridge National Laboratory), David J. Martinez (Sandia National Laboratories), and Natalie Bates (EE HPC WG). The

94

Environmental Energy Technologies Division Thermal Field Tests  

NLE Websites -- All DOE Office Websites (Extended Search)

Thermal Field Tests Joseph H. Klems, LBNL DOE PEER Review San Francisco, CA April 20, 1999 Environmental Energy Technologies Division Current Work l Skylight Thermal Performance *...

95

Developing Websites in the Environmental Energy Technologies...  

NLE Websites -- All DOE Office Websites (Extended Search)

Office EETD Safety Program Development Contact Us Department Contacts Media Contacts Developing Websites in the Environmental Energy Technologies Division: A Brown Bag Lunch...

96

Energy Crossroads: Market Data | Environmental Energy Technologies...  

NLE Websites -- All DOE Office Websites (Extended Search)

Skip messages Jump to page content Jump to page footer Home Environmental Energy Technologies Division Emergency Contacts Intranet A-Z Index Staff How Do I? License a technology...

97

Division of Environmental Control Technology program, 1977  

DOE Green Energy (OSTI)

Environmental engineering programs are reviewed for the following technologies; coal; petroleum and gas; oil shale; solar; geothermal and energy conservation; nuclear energy; and decontamination and decommissioning. Separate abstracts were prepared for each technology. (MHR)

None

1978-06-01T23:59:59.000Z

98

THE ENVIRONMENTAL TECHNOLOGIES ACCEPTANCE (ETA) PROGRAM  

Science Conference Proceedings (OSTI)

The Environmental Technologies Acceptance (ETA) Program at the Energy and Environmental Research Center (EERC) is intended to advance the development, commercial acceptance, and timely deployment of selected private sector technologies for the cleanup of sites in the nuclear defense complex as well as the greater market. As shown in Table 1, this cooperative agreement funded by the National Energy Technology Laboratory (NETL) consists of three tasks: Technology Selection, Technology Development, and Technology Verification. As currently conceived, the ETA will address the needs of as many technologies as appropriate under its current 3-year term. This report covers activities during the first 6 months of the 3-year ETA program.

Christina B. Behr-Andres

2001-04-01T23:59:59.000Z

99

Environmental aspects of solar energy technologies  

DOE Green Energy (OSTI)

Solar energy technologies have environmental effects, and these may be positive or negative compared with current ways of producing energy. In this respect, solar energy technologies are no different from other energy systems. Where solar energy technologies differ is that no unresolvable technological problems (e.g., CO/sub 2/ emissions) or sociopolitical barriers (e.g., waste disposal, catastrophic accidents) have been identified. This report reviews some of the environmental aspects of solar energy technologies and ongoing research designed to identify and resolve potential environmental concerns. It is important to continue research and assessment of environmental aspects of solar energy to ensure that unanticipated problems do not arise. It is also important that the knowledge gained through such environmental research be incorporated into technology development programs and policy initiatives.

Strojan, C.L.

1980-09-01T23:59:59.000Z

100

Telephone Flat Geothermal Development Project Environmental Impact Statement Environmental Impact Report. Final  

DOE Green Energy (OSTI)

This Final Environmental Impact Statement and Environmental Impact Report (Final EIS/EIR) has been prepared to meet the requirements of the National Environmental Policy Act (NEPA) and the California Environmental Quality Act (CEQA). The Proposed Action includes the construction, operation, and decommissioning of a 48 megawatt (gross) geothermal power plant with ancillary facilities (10-12 production well pads and 3-5 injection well pads, production and injection pipelines), access roads, and a 230-kilovolt (kV) transmission line in the Modoc National Forest in Siskiyou County, California. Alternative locations for the power plant site within a reasonable distance of the middle of the wellfield were determined to be technically feasible. Three power plant site alternatives are evaluated in the Final EIS/EIR.

None

1999-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "flats environmental technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Cleanup at Rocky Flats  

NLE Websites -- All DOE Office Websites (Extended Search)

David L. Clark, Los Alamos National Laboratory David L. Clark, Los Alamos National Laboratory The Rocky Flats Environmental Technology Site (RFETS) is an environmental cleanup site located about 16 miles northwest of downtown Denver (Fig 1). Two decades of routine monitoring have shown that the environment around RFETS is contaminated with actinide elements (U, Pu, Am) from site operations, [1] and RFETS has been designated by the U.S. Environmental Protection Agency (EPA) as a Superfund cleanup site. Until December 1989, the Rocky Flats Plant made components for nuclear weapons using various radioactive and hazardous materials, including plutonium, uranium and beryllium. Nearly 40 years of nuclear weapons production left behind a legacy of contaminated facilities, soils, and ground water. More than 2.5 million people live within a 50 mile radius of the site; 300,000 of those live in the Rocky Flats watershed.

102

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

National Laboratory Atmospheric Sciences Advanced Technologies Building Technologies Energy Analysis Indoor Environment Fall 2003 Volume 4 Number 4 NEWS chool districts in...

103

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

ENERGYPLUS Saves Federal Building 9 Million in Energy Costs Lawrence Berkeley National Laboratory Atmospheric Sciences Advanced Technologies Building Technologies Energy Analysis...

104

Green Technology Foresight about environmentally friendly products  

E-Print Network (OSTI)

. Environmental governance 9 B. Guiding research and research policy: 11 C. Support for eco-innovation 12 D Foundation 227 6.5.3 EU's Environmental Technologies Action Plan (ETAP) 228 6.6 GUIDING RESEARCH AND RESEARCH- AND NANOTECHNOLOGY 237 6.9.1 Introduction 237 6.9.2 Environmental governance 238 6.9.3 Guiding research and research

Mosegaard, Klaus

105

Available Technologies: Electrochemical Environmental Cell ...  

Electrochemical Environmental Cell with Vertical, Aligned Electrodes for TEM IB-3330. ... Energy storage device / battery research and development;

106

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

the state of wind power in the U.S.? We've got you covered with the annual Wind Technologies Report. What's new in advanced lithium-ion battery technologies? Check out two...

107

Technology integration project: Environmental Restoration Technologies Department Sandia National Laboratories  

SciTech Connect

Sandia National Laboratories Environmental Restoration Technologies Department is developing environmental restoration technologies through funding form the US Department of Energy`s (DOE`s) Office of Science and Technology. Initially, this technology development has been through the Mixed Waste Landfill Integrated Demonstration (MWLID). It is currently being developed through the Contaminant Plume containment and Remediation Focus Area, the Landfill Stabilization Focus Area, and the Characterization, Monitoring, and Sensor Cross-Cutting Program. This Technology Integration Project (TIP) was responsible for transferring MWLID-developed technologies for routine use by environmental restoration groups throughout the DOE complex and commercializing these technologies to the private sector. The MWLID`s technology transfer/commercialization successes were achieved by involving private industry in development, demonstration, and technology transfer/commercialization activities; gathering and disseminating information about MWLID activities and technologies; and promoting stakeholder and regulatory involvement. From FY91 through FY95, 30 Technical Task Plans (TTPs) were funded. From these TTPs, the MWLID can claim 15 technology transfer/commercialization successes. Another seven technology transfer/commercialization successes are expected. With the changeover to the focus areas, the TIP continued the technology transfer/commercialization efforts begun under the MWLID.

Williams, C.V.; Burford, T.D. [Sandia National Labs., Albuquerque, NM (United States). Environmental Restoration Technologies] [Sandia National Labs., Albuquerque, NM (United States). Environmental Restoration Technologies; Allen, C.A. [Tech Reps, Inc., Albuquerque, NM (United States)] [Tech Reps, Inc., Albuquerque, NM (United States)

1996-08-01T23:59:59.000Z

108

EA-1120: Final Environmental Assessment | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Environmental Assessment Solid Residues Treatment, Repackaging and Storage at the Rocky Flats Environmental Technology Site This EA evaluates the environmental impacts of the...

109

EA-1146: Final Environmental Assessment | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Assessment EA-1146: Final Environmental Assessment Radioactive Waste Storage at Rocky Flats Environmental Technology Site, Golden, Colorado This EA evaluates the environmental...

110

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Technologies Division, with contributions from EETD's Galen Barbose and Andrew Mills. The report describes the rapid growth in U.S. wind power installations. In 2006,...

111

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

Volume 5 Number 1 R esearchers at the Lawrence Berkeley National Laboratory (Berkeley Lab) Environ- mental Energy Technologies Division (EETD) have completed the first...

112

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

gas emissions. Lawrence Berkeley National Laboratory (Berkeley Lab) researchers are developing technologies to help make this possible. Buildings in the United States today...

113

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

buildings save power through automated demand response technology and advanced "Smart Grid" development. From left: Sila Kiliccote, Girish Ghatikar, and Mary Ann Piette. The...

114

HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY  

Science Conference Proceedings (OSTI)

FIU-HCET participated in an ICT meeting at Mound during the second week of December and presented a brief videotape of the testing of the Robotic Climber technology. During this meeting, FIU-HCET proposed the TechXtract technology for possible testing at Mound and agreed to develop a five-page proposal for review by team members. FIU-HCET provided assistance to Bartlett Inc. and General Lasertronics Corporation in developing a proposal for a Program Opportunity Notice (PON). The proposal was submitted by these companies on January 5, 1999. The search for new equipment dismantlement technologies is continuing. The following vendors have responded to requests for demonstration: LUMONICS, Laser Solutions technology; CRYO-BEAM, Cryogenic cutting technology; Waterjet Technology Association, Waterjet Cutting technology; and DIAJET, Waterjet Cutting technology. Based on the tasks done in FY98, FIU-HCET is working closely with Numatec Hanford Corporation (NHC) and Pacific Northwest National Laboratory (PNNL) to revise the plan and scope of work of the pipeline plugging project in FY99, which involves activities of lab-scale flow loop experiments and a large-scale demonstration test bed.

M.A. Ebadian

1999-01-31T23:59:59.000Z

115

DOE Projects to Advance Environmental Science and Technology...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE Projects to Advance Environmental Science and Technology DOE Projects to Advance Environmental Science and Technology August 19, 2009 - 1:00pm Addthis Washington, DC - The...

116

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

cost-can reduce energy use by 20 percent to 30 percent. Adopting energy-efficient AC technology that is also cost effective could save more than 192 terawatt-hours per year...

117

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

to power informa- tion technology in the U.S.? EETD's End-Use Energy Forecasting Group, led by Jonathan Koomey, has released a new study estimating office and network equipment...

118

Fiscal year 1990 Rocky Flats Plant Environmental Restoration program Current-Year Work Plan  

SciTech Connect

The Rocky Flats Plant (RFP) is a nuclear weapons manufacturing facility currently operated by EG G for the US Department of Energy (DOE). RFP is located at the foot of the Rocky Mountains in Jefferson Country, Colorado. The Fiscal Year 1990 (FY90) Current-Year Work Plan (CYWP) is intended to serve as a guidance document for the Environmental Restoration (ER) and RCRA Compliance programs that will be implemented at RFP. The CYWP provides in one document any cross-references necessary to understand the interrelationships between the CYWP and the DOE Five-Year Plan (FYP), Site-Specific Plan (SSP), and other related documents. The scope of this plan includes comparison of planned FY90 ER activities to those actually achieved. The CYWP has been updated to include Colorado Department of Health (CDH), US Environmental Protection Agency (EPA), and DOE Inter-Agency Agreement ER activities. It addresses hazardous wastes, radioactive wastes, mixed wastes (radioactive and hazardous), and sanitary wastes. The CYWP also addresses facilities and sites contaminated with or used in management of those wastes.

Nielsen, T. (EG and G Rocky Flats, Inc., Golden, CO (USA)); Waage, E.; Miller, D. (Stoller (S.M.) Corp., Boulder, CO (USA))

1990-01-01T23:59:59.000Z

119

National Wind Technology Center sitewide, Golden, CO: Environmental assessment  

SciTech Connect

The National Renewable Energy Laboratory (NREL), the nation`s primary solar and renewable energy research laboratory, proposes to expand its wind technology research and development program activities at its National Wind Technology Center (NWTC) near Golden, Colorado. NWTC is an existing wind energy research facility operated by NREL for the US Department of Energy (DOE). Proposed activities include the construction and reuse of buildings and facilities, installation of up to 20 wind turbine test sites, improvements in infrastructure, and subsequent research activities, technology testing, and site operations. In addition to wind turbine test activities, NWTC may be used to support other NREL program activities and small-scale demonstration projects. This document assesses potential consequences to resources within the physical, biological, and human environment, including potential impacts to: air quality, geology and soils, water resources, biological resources, cultural and historic resources, socioeconomic resources, land use, visual resources, noise environment, hazardous materials and waste management, and health and safety conditions. Comment letters were received from several agencies in response to the scoping and predecisional draft reviews. The comments have been incorporated as appropriate into the document with full text of the letters contained in the Appendices. Additionally, information from the Rocky Flats Environmental Technology Site on going sitewide assessment of potential environmental impacts has been reviewed and discussed by representatives of both parties and incorporated into the document as appropriate.

1996-11-01T23:59:59.000Z

120

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

lectrochromic glazings promise to be the next major advance in energy-efficient window technology, helping to achieve the goal of transforming windows and skylights from an energy liability in buildings to an energy source for the nation's building stock. The glazing can be reversibly switched from clear to a transparent, colored state by applying a low volt- age, resulting in dynamically controllable thermal and optical properties ("smart windows"). Incorporating electrochromic glaz- ings could reduce peak electric loads by 20 to 30% in many com- mercial buildings and increase daylighting benefits throughout the U.S., as well as improve comfort and potentially enhance pro- ductivity in our homes and offices. These technologies will pro- vide maximum flexibility

Note: This page contains sample records for the topic "flats environmental technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

Center Retrofit Center Retrofit Home Energy Score Pilot Program Tracking the Sun III Research Highlights Sources and Credits PDF of EETD News Energy Efficient Data Center Retrofit - Wireless Sensor Network Data-Center Rack Doors Passive rear door heat exchanger devices help optimize energy efficiency in a data center at Lawrence Berkeley National Laboratory. Over the decades, the energy efficiency technologies and processes researched and developed at Lawrence Berkeley National Laboratory (Berkeley Lab) have supported energy-efficient technologies throughout the world. From time to time, however, Berkeley Lab has the opportunity to apply its solutions right on its own grounds. In 2007, Berkeley Lab's 40-year-old data center had HVAC problems and was running out of cooling capacity. In response, it instigated a project to

122

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

summer 2004, Lawrence Berkeley National Laboratory (Berkeley Lab) summer 2004, Lawrence Berkeley National Laboratory (Berkeley Lab) researchers used two different kinds of technology, a price signal sent over the internet to facility computers, and a hard-wired internet relay box, to test auto- mated demand response. They found up to four megawatts (MW) of savings in 36 buildings located at 18 sites, according to a new report. The research, published as "Findings from the 2004 Fully Automated Demand Response

123

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

2: 2: Vol. 10, No. 3 Middle-Income Energy Savings LIGTT Greenhouse Gas Standards Port of Oakland Study Ashok Gadgil Wins Zayed Award Max Tech Research Highlights Sources and Credits PDF of EETD News Helping Middle-Income Families Find Energy Savings A recent study by researchers at Lawrence Berkeley National Laboratory (Berkeley Lab) identifies steps that energy-efficiency program managers can take to deliver significant savings on home energy bills to middle-income households. Looking across a green field at a row of medium sized homes. "Middle income households have been hit hard by the recent recession, and sagging home prices have undermined the traditional reliance of middle-income households on home equity for financing home improvements," says Berkeley Lab's Mark Zimring, a researcher in the Environmental Energy

124

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

long-standing focus of EETD electrochemical research long-standing focus of EETD electrochemical research has been to support the development of high-perfor- mance rechargeable batteries for electric vehicles. This has proved to be an extremely challenging task because of the need to simultaneously meet multiple battery performance requirements: high energy (watt-hours per unit battery mass or volume), high power (watts per unit battery mass or volume), long life (10 years and hundreds of deep charge-discharge cycles), low cost (measured in dollars per unit battery capacity), resistance to abuse and operating temperature extremes, perfect safety, and minimal environmental impact. Despite years of intensive worldwide R&D, no battery can meet all of these goals. A compromise of sorts is the hybrid-electric vehicle (HEV).

125

HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY  

Science Conference Proceedings (OSTI)

The Online Measurement of Decontamination project team received a commitment for a demonstration in May from the Sacramento (California) Municipal Utility District (SMUD) Rancho Seco site. Since this site is a member of the DOE Commercial Utilities Consortium, the demonstration will fulfill the DOE and commercial technology demonstration requirements. Discussion on deployment of the Integrated Vertical and Overhead Decontamination (IVOD) System at Rancho Seco was conducted; date for deployment tentatively scheduled for early spring. Based upon fictional requirements from SRS for a shiny monitor in a high-level waste tank, FIU-HCET developed and delivered a draft slurry monitor design and draft test plan. Experiments measuring slurry settling time for SRS slurry simulant at 10 wt% have been completed on FIU-HCET'S flow loop with SRS dip. The completed design package of the test mockup for evaluating Non-Intrusive Location of Buried Items Technologies was sent to Fluor Fernald and the Operating Engineers National Hazmat Program for review. Comments are due at the end of January. Preliminary experiments to determine size distribution of aerosols generated during metal cutting were performed. A 1/4-inch-thick iron plate was cut using a plasma arc torch, and the size distribution of airborne particles was measured using a multistage impactor. Per request of DOE-Ohio, FIU-HCET participated in a weeklong value engineering study for the characterization, decontamination, and dismantlement of their critical path facility.

M.A. Ebadian

2000-01-31T23:59:59.000Z

126

Environmental Energy Technologies Division Energy Analysis Department Community Wind Power  

E-Print Network (OSTI)

Environmental Energy Technologies Division · Energy Analysis Department Community Wind Power projects * standard US commercial wind development #12;Environmental Energy Technologies Division · Energy % Community- Owned Community- Owned Wind Capacity (MW) Total Wind Capacity (MW) #12;Environmental Energy

127

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

7: 7: Vol. 7, No. 2 Energy-Efficient Electrochromic Windows on the Threshold What Can Models Tell Us About Risk? An Inexpensive Wireless Lighting Control System to Improve Energy Efficiency Technology Transfer Monitoring of Western Electricity Markets Research Highlights Sources and Credits PDF of EETD News Energy-Efficient Electrochromic Windows on the Threshold A small, curious building began to rise on a hillside parking lot at Lawrence Berkeley National Laboratory (Berkeley Lab) in 2002. The exterior walls of the 953-square-foot structure were plain enough-corrugated sheet metal. But as the building went up, a distinctive feature appeared: the south-facing wall, with a spectacular view of the San Francisco Bay area, held three large picture windows, each 10 feet wide by 9 feet high and

128

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

2: 2: Vol. 11, No. 2 FLEXLAB Preview First FLEXLAB Module Takes Shape OpenADR DoD/ESTCP Activities Tracking the Sun Atmospherically Vented Combustion Appliances Unplug and Save Childcare Air Quality Research Highlights Sources and Credits PDF of EETD News Berkeley Lab Opens First Phase of FLEXLAB, a New Laboratory for Energy-Efficient Buildings Lawrence Berkeley National Laboratory (Berkeley Lab) recently opened the first two testbeds of FLEXLAB, the Facility for Low Energy eXperiments in Buildings. FLEXLAB is a set of testbeds for studying and demonstrating energy-efficient building technologies. Constructed within an existing building, they will allow Berkeley Lab researchers and their partners to study and demonstrate energy-efficient lighting systems and to collaborate

129

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

Conductive Adhesive Improves Lithium-ion Battery Storage by 30 Percent Conductive Adhesive Improves Lithium-ion Battery Storage by 30 Percent An award-winning technology that can boost the capacity of rechargeable lithium-ion batteries has just gotten even better. Lawrence Berkeley National Laboratory (Berkeley Lab) battery researcher Gao Liu and his team earned a coveted R&D 100 Award this year for their invention of an electrically conductive rubbery adhesive that can be mixed with particles of silicon to form a battery's negative electrode, or anode. Lithium-ion batteries whose anodes are built with this "conducting polymer binder" can store 30 percent more power than those with conventional anodes made with aggregated carbon particles. Now, by literally tinkering at the edges of this new polymer material, researchers have raised its performance

130

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

Recovery Act Funding Enables Berkeley Lab to Help Federal Agencies Improve Recovery Act Funding Enables Berkeley Lab to Help Federal Agencies Improve Energy Efficiency Recovery Act logo The U.S. Department of Energy's Lawrence Berkeley National Laboratory (Berkeley Lab) has received $1.8 million in American Recovery and Reinvestment Act (ARRA) funding to provide technical expertise to federal energy managers. The funding will enable Berkeley Lab scientists to provide technical expertise to help federal energy managers perform projects and monitor their performance. Work will focus on advanced energy-efficient technologies in lighting, HVAC (heating, ventilation, and air conditioning), and control systems for the buildings, laboratories, and data centers of several federal agencies. "This funding will help implement energy efficiency projects across the

131

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

Berkeley Lab/3M Team Demonstrate Potential to Significantly Reduce Building Berkeley Lab/3M Team Demonstrate Potential to Significantly Reduce Building Lighting Energy Use Berkeley Lab/3M Team Demonstrate Potential to Significantly Reduce Building Lighting Energy Use Daylighting is the strategy of admitting light from the sun and sky to reduce the use of electric lighting in buildings. Since lighting energy use represents 13 percent of the total primary energy used by buildings in the United States (5.42 quadrillion Btu in 2010), these technologies can play a significant role towards meeting U.S. and state energy-efficiency and greenhouse gas emission-reduction goals. Conventional windows cannot provide useful daylight beyond about one to one-and-a-half times the head height of a window because interior shades, when lowered to control direct

132

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

2000: 2000: Vol. 2, No. 1 Electrochromic Window Tests in U.S. Office Show Promise CLASP Helps Developing Nations Implement Energy Standards EETD Scientists Aid Research Efforts Leading to MTBE Ban Power Outage Study Team Examines Electricity Reliability Research Highlights Sources and Credits PDF of EETD News Electrochromic Window Tests in U.S. Office Show Promise Electrochromic glazings promise to be the next major advance in energy-efficient window technology, helping to achieve the goal of transforming windows and skylights from an energy liability in buildings to an energy source for the nation's building stock. The glazing can be reversibly switched from clear to a transparent, colored state by applying a low voltage, resulting in dynamically controllable thermal and optical

133

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

7: 7: Vol. 7, No. 3 CALGEM: Taking the Measure of California's Greenhouse Gas Emissions Studies Confirm Large Public Health and Economic Impact of Dampness and Mold Behind Closed Doors: Beware the Air Berkeley Lab's Ultraclean Combustion Technology for Electricity Generation Fires Up in Hydrogen Tests 'Greening the Capitol' Gets Technical Assistance from Berkeley Lab Research Highlights Sources and Credits PDF of EETD News CALGEM: Taking the Measure of California's Greenhouse Gas Emissions To play its part in reducing the consequences of global warming, the state of California has embarked on a trailblazing effort to reduce its emissions of greenhouse gases (GHGs). Assembly Bill 32, recently passed by the California legislature and signed into law by Governor Arnold

134

Biomass Resources, Technologies, and Environmental Benefits  

Science Conference Proceedings (OSTI)

Biomass, a renewable energy source, is essentially solar energy captured and stored in plants via photosynthesis. For electric power generation organizations that have expertise and assets in combustion or gasification, biomass can be the most appropriate renewable energy source. This report addresses the size and cost of the biomass resource, while describing the technologies and environmental issues involved.

2004-06-03T23:59:59.000Z

135

DOE - Office of Legacy Management -- Rocky Flats Regulatory Documents  

NLE Websites -- All DOE Office Websites (Extended Search)

Regulatory Documents Regulatory Documents Rocky Flats Site, Colorado Regulatory Documents All documents are Adobe Acrobat files. pdf_icon Notification that GS01 is no longer an RFLMA Point of Compliance (POC) Third Five-Year Review Report for the Rocky Flats Site Rocky Flats Legacy Management Agreement Environmental Covenant, November 14, 2011 Corrective Action Decision/Record of Decision Amendment for Rocky Flats Plant (USDOE) Central Operable Unit Proposed Plan for the Rocky Flats CAD/ROD Amendment (June 2011) Second Five-Year Review Report for the Rocky Flats Site Corrective Action Decision/Record of Decision for Rocky Flats Plant (USDOE) Peripheral Operable Unit and Central Operable Unit Rocky Flats Environmental Technology Site Proposed Plan Present Landfill Monitoring and Maintenance Plan

136

EIS-0276: Notice of Intent to Prepare an Environmental Impact...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

to Prepare an Environmental Impact Statement Interim Storage of Plutonium at the Rocky Flats Environmental Technology Site, Golden, Colorado The Department of Energy (DOE)...

137

THE U.S. DEPARTMENT OF ENERGYS FACILITY REUSE AT THE ROCKY FLATS ENVIRONMENTALTECHNOLOGY SITE, IG-0425  

Energy.gov (U.S. Department of Energy (DOE))

For several decades, the Rocky Flats Environmental Technology Site (Site) operated as part of the Nation's nuclear weapons production complex. In 1989, however, the Department of Energy (DOE)...

138

Letter Report Yucca Mountain Environmental Monitoring Systems Initiative - Air Quality Scoping Study for Crater Flat, Nye County, Nevada  

SciTech Connect

The Desert Research Institute (DRI) is performing a scoping study as part of the U.S. Department of Energy's Yucca Mountain Environmental Monitoring Systems Initiative (EMSI). The main objective is to obtain baseline air quality information for Yucca Mountain and an area surrounding the Nevada Test Site (NTS). Air quality and meteorological monitoring and sampling equipment housed in a mobile trailer (shelter) (cover page figure) is collecting data at eight sites outside the NTS, including Ash Meadows National Wildlife Refuge (NWR), Beatty, Sarcobatus Flats, Rachel, Caliente, Pahranagat NWR, Crater Flat, and Tonopah Airport, and at four sites on the NTS (Engelbrecht et al., 2007a-d). The trailer is stationed at any one site for approximately eight weeks at a time. This letter report provides a summary of air quality and meteorological data, on completion of the site's sampling program.

J. Engelbrecht; I. Kavouras; D. Campbell; S.Campbell; S. Kohl; D. Shafer

2009-04-02T23:59:59.000Z

139

Letter Report: Yucca Mountain Environmental Monitoring Systems Initiative - Air Quality Scoping Study for Crater Flat, Nye County, Nevada  

Science Conference Proceedings (OSTI)

The Desert Research Institute (DRI) is performing a scoping study as part of the U.S. Department of Energy's Yucca Mountain Environmental Monitoring Systems Initiative (EMSI). The main objective is to obtain baseline air quality information for Yucca Mountain and an area surrounding the Nevada Test Site (NTS). Air quality and meteorological monitoring and sampling equipment housed in a mobile trailer (shelter) (cover page figure) is collecting data at eight sites outside the NTS, including Ash Meadows National Wildlife Refuge (NWR), Beatty, Sarcobatus Flats, Rachel, Caliente, Pahranagat NWR, Crater Flat, and Tonopah Airport, and at four sites on the NTS (Engelbrecht et al., 2007a-d). The trailer is stationed at any one site for approximately eight weeks at a time. This letter report provides a summary of air quality and meteorological data, on completion of the site's sampling program.

J. Engelbrecht; I. Kavouras; D. Campbell; S. Campbell; S. Kohl; D. Shafer

2008-08-01T23:59:59.000Z

140

Environmental data energy technology characterizations: synthetic fuels  

SciTech Connect

Environmental Data Energy Technology Characterizations are publications which are intended to provide policy analysts and technical analysts with basic environmental data associated with key energy technologies. This publication provides documentation on synthetic fuels (coal-derived and oil shale). The transformation of the energy in coal and oil shale into a more useful form is described in this publication in terms of major activity areas in the synthetic fuel cycles, that is, in terms of activities which produce either an energy product or a fuel leading to the production of an energy product in a different form. The activities discussed in this document are coal liquefaction, coal gasification, in-situ gasification, and oil shales. These activities represent both well-documented and advanced activity areas. The former activities are characterized in terms of actual operating data with allowance for future modification where appropriate. Emissions are assumed to conform to environmental standards. The advanced activity areas examined are those like coal liquefaction and in-situ retorting of oil shale. For these areas, data from pilot or demonstration plants were used where available; otherwise, engineering studies provided the data. The organization of the chapters in this volume is designed to support the tabular presentation in the summary volume. Each chapter begins with a brief description of the activity under consideration. The standard characteristics, size, availability, mode of functioning and place in the fuel cycle are presented. Next, major legislative and/or technological factors influencing the commercial operation of the activity are offered. Discussions of resources consumed, residuals produced, and economics follow. To aid in comparing and linking the different activity areas, data for each area are normalized to 10/sup 12/ Btu of energy output from the activity.

1980-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "flats environmental technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

SM Environmental Technologies Pvt Ltd | Open Energy Information  

Open Energy Info (EERE)

SM Environmental Technologies Pvt Ltd SM Environmental Technologies Pvt Ltd Jump to: navigation, search Name SM Environmental Technologies Pvt. Ltd. Place Tamil Nadu, India Sector Biomass Product Chennai-based biomass project developer. The firm is a subsidiary of Orient Green Power Ltd. References SM Environmental Technologies Pvt. Ltd.[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. SM Environmental Technologies Pvt. Ltd. is a company located in Tamil Nadu, India . References ↑ "SM Environmental Technologies Pvt. Ltd." Retrieved from "http://en.openei.org/w/index.php?title=SM_Environmental_Technologies_Pvt_Ltd&oldid=351187" Categories: Clean Energy Organizations Companies

142

Environmental data energy technology characterizations: coal  

SciTech Connect

This document describes the activities leading to the conversion of coal to electricity. Specifically, the activities consist of coal mining and beneficiation, coal transport, electric power generation, and power transmission. To enhance the usefulness of the material presented, resource requirements, energy products, and residuals for each activity area are normalized in terms of 10/sup 12/ Btus of energy produced. Thus, the total effect of producing electricity from coal can be determined by combining the residuals associated with the appropriate activity areas. Emissions from the coal cycle are highly dependent upon the type of coal consumed as well as the control technology assigned to the activity area. Each area is assumed to be equipped with currently available control technologies that meet environmental regulations. The conventional boiler, for example, has an electrostatic precipitator and a flue gas desulfurization scrubber. While this results in the removal of most of the particulate matter and sulfur dioxide in the flue gas stream, it creates other new environmental residuals -- solid waste, sludge, and ash. There are many different types of mined coal. For informational purposes, two types from two major producing regions, the East and the West, are characterized here. The eastern coal is typical of the Northern Appalachian coal district with a high sulfur and heat content. The western coal, from the Powder River Basin, has much less sulfur, but also has a substantially lower heating value.

Not Available

1980-04-01T23:59:59.000Z

143

Clean Coal Technology: Environmental Solution or Greenwashing?.  

E-Print Network (OSTI)

??The same people most negatively affected by environmental injustices are also most vulnerable to deceptive environmental advertising, or greenwashing. Accordingly, the false marketing of corporate (more)

Winston, Laurie E.

2009-01-01T23:59:59.000Z

144

Independent Oversight Special Review, Rocky Flats Closure Project Site -  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Special Review, Rocky Flats Closure Project Special Review, Rocky Flats Closure Project Site - April 2001 Independent Oversight Special Review, Rocky Flats Closure Project Site - April 2001 April 2001 Special Review of the Rocky Flats Closure Project Site The U.S. Department of Energy (DOE) Office of Independent Environment, Safety, and Health Oversight (EH-2), within the Office of Environment, Safety and Health, conducted an independent oversight Special Review at the Rocky Flats Closure Project (RFCP). The Special Review was conducted at the request of the Rocky Flats Field Office (RFFO), which is the DOE organizational element with responsibility for the RFCP (formerly known as the Rocky Flats Environmental Technology Site). Kaiser-Hill Company, LLC (KH) is the prime contractor for the RFCP. RFCP's project-oriented approach and aggressive scheduling have resulted

145

Independent Oversight Special Review, Rocky Flats Closure Project Site -  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Oversight Special Review, Rocky Flats Closure Project Oversight Special Review, Rocky Flats Closure Project Site - April 2001 Independent Oversight Special Review, Rocky Flats Closure Project Site - April 2001 April 2001 Special Review of the Rocky Flats Closure Project Site The U.S. Department of Energy (DOE) Office of Independent Environment, Safety, and Health Oversight (EH-2), within the Office of Environment, Safety and Health, conducted an independent oversight Special Review at the Rocky Flats Closure Project (RFCP). The Special Review was conducted at the request of the Rocky Flats Field Office (RFFO), which is the DOE organizational element with responsibility for the RFCP (formerly known as the Rocky Flats Environmental Technology Site). Kaiser-Hill Company, LLC (KH) is the prime contractor for the RFCP.

146

Environmental Energy Technologies Division Energy Analysis Department Renewable Energy  

E-Print Network (OSTI)

Environmental Energy Technologies Division · Energy Analysis Department Renewable Energy-price contracts for renewable energy 3) What impact do renewables have on gas prices? 4) What impact do high gas prices have on renewables? #12;Environmental Energy Technologies Division · Energy Analysis Department

147

Environmental Energy Technologies Division An Evaluation Framework for DER  

E-Print Network (OSTI)

Commare research supported by the Distributed Energy Program of the U.S. Dept of Energy (and the California Energy1 Environmental Energy Technologies Division An Evaluation Framework for DER talk presented Commission) #12;2 Environmental Energy Technologies Division Outline I. Introduction II. Benefits Taxonomy

148

Environmental Energy Technologies Division Energy Analysis Department Renewables Portfolio Standards  

E-Print Network (OSTI)

Energy Technologies Division · Energy Analysis Department State RPS Policies: 21 States and D.C% by 2020 MT: 15% by 2015 DE: 10% by 2019 DC: 11% by 2022 WA: 15% by 2020 #12;Environmental Energy Texas MD Class I DC Class I #12;Environmental Energy Technologies Division · Energy Analysis Department

149

Energy Crossroads: Transportation | Environmental Energy Technologies...  

NLE Websites -- All DOE Office Websites (Extended Search)

friendly highway transportation technologies that will enable America to use less petroleum. The long-term aim is to develop "leap frog" technologies that will provide...

150

Technology and public participation in environmental decisions  

E-Print Network (OSTI)

Since 1970, the National Environmental Policy Act (NEPA) has served as the main instrument for analyzing the environmental impacts of federal agency decisions and providing the public with opportunities to participate in ...

Yao, Basilia Wang

2006-01-01T23:59:59.000Z

151

Idaho National Engineering and Environmental Laboratory Environmental Technologies Proof-of-Concepts. Final report FY-96  

SciTech Connect

The Idaho National Engineering and Environmental Laboratory Environmental Technologies Proof-of-Concept Project was initiated for the expedited development of new or conceptual technologies in support of groundwater fate, transport, and remediation; buried waste characterization, retrieval, and treatment; waste minimization/pollution prevention; and spent fuel handling and storage. In Fiscal Year 1996, The Idaho National Engineering and Environmental Laboratory proposed 40 development projects and the Department of Energy funded 15. The projects proved the concepts of the various technologies, and all the technologies contribute to successful environmental management.

Barrie, S.L.; Carpenter, G.S.; Crockett, A.B. [and others

1997-04-01T23:59:59.000Z

152

Breakthrough Water Cleaning Technology Could Lessen Environmental Impacts  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Breakthrough Water Cleaning Technology Could Lessen Environmental Breakthrough Water Cleaning Technology Could Lessen Environmental Impacts from Shale Production Breakthrough Water Cleaning Technology Could Lessen Environmental Impacts from Shale Production April 28, 2011 - 1:00pm Addthis Washington, DC - A novel water cleaning technology currently being tested in field demonstrations could help significantly reduce potential environmental impacts from producing natural gas from the Marcellus shale and other geologic formations, according to the Department of Energy's (DOE) National Energy Technology Laboratory (NETL). ABSMaterial's Osorb® technology, which uses swelling glass to remove impurities, has been shown to clean flow back water and produced water from hydraulically fractured oil and gas wells. Produced waters are by far the

153

THE ROLE OF LAND USE IN ENVIRONMENTAL DECISION MAKING AT THREE DOE MEGA-CLEANUP SITES FERNALD & ROCKY FLATS & MOUND  

SciTech Connect

This paper explores the role that future land use decisions have played in the establishment of cost-effective cleanup objectives and the setting of environmental media cleanup levels for the three major U.S. Department of Energy (DOE) sites for which cleanup has now been successfully completed: the Rocky Flats, Mound, and Fernald Closure Sites. At each site, there are distinct consensus-building histories throughout the following four phases: (1) the facility shut-down and site investigation phase, which took place at the completion of their Cold War nuclear-material production missions; (2) the decision-making phase, whereby stakeholder and regulatory-agency consensus was achieved for the future land-use-based environmental decisions confronting the sites; (3) the remedy selection phase, whereby appropriate remedial actions were identified to achieve the future land-use-based decisions; and (4) the implementation phase, whereby the selected remedial actions for these high-profile sites were implemented and successfully closed out. At each of the three projects, there were strained relationships and distrust between the local community and the DOE as a result of site contamination and potential health effects to the workers and local residents. To engage citizens and interested stakeholder groups - particularly in the role of final land use in the decision-making process, the site management teams at each respective site developed new public-participation strategies to open stakeholder communication channels with site leadership, technical staff, and the regulatory agencies. This action proved invaluable to the success of the projects and reaching consensus on appropriate levels of cleanup. With the implementation of the cleanup remedies now complete, each of the three DOE sites have become models for future environmental-remediation projects and associated decision making.

JEWETT MA

2011-01-14T23:59:59.000Z

154

Energy Crossroads | Environmental Energy Technologies Division  

NLE Websites -- All DOE Office Websites (Extended Search)

lists of links to energy and environmental information resources. < Previous Topic Energy Crossroads Index Next Topic > Suggest a Listing These links represent a wide array...

155

DOE Projects to Advance Environmental Science and Technology | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE Projects to Advance Environmental Science and Technology DOE Projects to Advance Environmental Science and Technology DOE Projects to Advance Environmental Science and Technology August 19, 2009 - 1:00pm Addthis Washington, DC - The Office of Fossil Energy's National Energy Technology Laboratory (NETL) has selected nine new projects targeting environmental tools and technology for shale gas and coalbed methane (CBM) production. NETL's goals for these projects are to improve management of water resources, water usage, and water disposal, and to support science that will aid the regulatory and permitting processes required for shale gas development. A primary goal of Fossil Energy's Oil and Natural Gas Program is to enhance the responsible development of domestic natural gas and oil resources that supply the country's energy. A specific objective is to accelerate the

156

Environmental technologies program, Fiscal year 1994  

SciTech Connect

This document presents details of the technology that is currently being demonstrated at the Hanford Site. The program is testing technology for cost and time savings in the following clean-up areas: detection and characterization; soil and ground water remediation; remote handling; waste minimization; and high-level, low-level, and mixed waste treatment. This document also contains a technology integration section.

1994-12-31T23:59:59.000Z

157

Comparison of Energy Production and Performance from Flat-Plate Photovoltaic Module Technologies Deployed at Fixed Tilt: Preprint  

DOE Green Energy (OSTI)

This conference paper describes the performance data for 14 photovoltaic modules deployed at fixed-latitude tilt in the field are presented and compared. Module performance is monitored continuously for optimum power characteristics. Flat-plate module technologies representative of crystalline, amorphous, and polycrystalline silicon, and cadmium telluride and copper indium diselenide, are scrutinized for energy production, effective efficiency and performance ratio-ratio of effective to reference efficiency. Most performance ratios exhibit seasonal fluctuations largely correlated to air or module temperatures, varying between 80% and 100%. These ratios tend toward larger values during winter and vise versa, except for amorphous silicon and cadmium telluride modules. In a-Si cases, the situation appears reversed: better performance ratios are exhibited during late summer. The effective efficiency and average daily and yearly energy production are analyzed and quantified.

del Cueto, J. A.

2002-05-01T23:59:59.000Z

158

Facility for Environmentally Friendly Transport Technology and...  

Open Energy Info (EERE)

practical support to developing countries on participating in technology transfer and developing nationally appropriate mitigation actions (NAMAs) in the transport sector. A...

159

New Technologies that Enhance Environmental Protection, Increase Domestic  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

New Technologies that Enhance Environmental Protection, Increase New Technologies that Enhance Environmental Protection, Increase Domestic Production, Result from DOE-Supported Consortium New Technologies that Enhance Environmental Protection, Increase Domestic Production, Result from DOE-Supported Consortium September 13, 2011 - 1:00pm Addthis Washington, DC - New technologies that help small, independent oil and natural gas operators contribute to domestic energy production while improving environmental protection have resulted from U.S. Department of Energy (DOE) support of the Stripper Well Consortium (SWC). "Stripper wells" are wells that produce less than 10 barrels of oil or 60,000 standard cubic feet of natural gas per day. According to the Interstate Oil and Gas Compact Commission, more than 375,000 U.S. stripper

160

Bridge to a sustainable future: National environmental technology strategy  

Science Conference Proceedings (OSTI)

For the past two years the Administration has sought the views of Congress, the states, communities, industry, academia, nongovernmental organizations, and interested citizens on ways to spur the development and use of a new generation of environmental technologies. This document represents the views of thousands of individuals who participated in events around the country to help craft a national environmental technology strategy that will put us on the path to sustainable development.

NONE

1995-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "flats environmental technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

A survey of environmental needs and innovative technologies in Germany  

SciTech Connect

The International Technology Program (IT?), formerly the international Technology Exchange Program (ITEP), of the Department of Energy`s (DOE`s) Office of Environmental Restoration and Waste Management (EM) is responsible for promoting: (1) the import of innovative technologies to better address EM`s needs; and (2) the export of US services into foreign markets to enhance US competitiveness. Under this program: (1) the environmental restoration market in Germany was evaluated, including the description of the general types of environmental problems, the environmental regulations, and specific selected contaminated sites; and (2) potentially innovative environmental restoration technologies, either commercially available or under development in Germany, were identified, described and evaluated. It was found that: (1) the environmental restoration market in Germany is very large, on the order of several billion US dollars per year, with a significant portion possibly available to US businesses; and (2) a large number (54) of innovative environmental restoration technologies, which are either commercially available or under development in Germany, may have some benefit to the DOE EM program and should be considered for transfer to the US.

Voss, C.F.; Roberds, W.J. [Golder Associates, Inc., Redmond, WA (United States)

1995-05-01T23:59:59.000Z

162

Enforcement Letter - Rocky Flats  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1, 2000 1, 2000 Mr. Robert G. Card [ ] Kaiser-Hill Company, L.L.C Rocky Flats Environmental Technology Site 10808 Highway 93, Unit B Golden, CO 80403-8200 Subject: Enforcement Letter Dear Mr. Card: This letter refers to an evaluation by the Department of Energy (DOE) of noncompliance report number NTS-RFO--KHLL-SITEWIDE-2000-0005, which describes noncompliances with the design and procurement requirements of 10 CFR 830.120 (Quality Assurance Rule). 10 CFR 830.120(c)(2)(iii) requires that procured items and services shall meet established requirements and perform as required; 10 CFR 830.120(c)(2)(ii) requires that design work including changes, shall incorporate applicable requirements and design bases; 10 CFR 830.120(c)(2)(iv) requires that inspection and testing of specified items, services, and processes shall be conducted

163

Environmental issues relating to fossil energy technology options  

DOE Green Energy (OSTI)

The Office of Fossil Energy has prepared a report on fossil technology options available to reduce oil imports. It identifies energy processes ready for immediate deployment (called first wave) and those that, after further development, would provide substantial benefits over the first wave. The latter (called second wave) technologies could be in commercial use in the late 1980s. The status of environmental readiness for each of these fossil technologies is addressed in this report. Primary environmental concerns and environmental research required concurrent with fossil technology development and commercial operation are described herein and presented in conformance to the organization of the fossil options paper. In instances where environmental issues for related technologies are identical or nearly so, we have attempted to avoid redundancy. Although many environmental concerns have been recognized and are being dealt with for each technology, some areas of concern must receive continued attention. These are briefly mentioned in this introduction. Further details, specific to each technology, are in the appropriate sections of the report. Research is continuing on both health and ecological effects of coal combustion and gasification. Having identified cancer-producing elements in airborne particulates, the Environmental protection Agency (EPA) is developing a standard for respirable range particulates. With regard to the synthetic fuels, one of the major concerns is the health and safety aspects of the coal liquid products. It is known, for example, that some coal-derived liquids that have undergone only minimal processing or upgrading do contain carcinogens. Environmental effects in other fossil energy areas such as oil shale processing, enhanced oil recovery, etc., are discussed.

Not Available

1979-10-01T23:59:59.000Z

164

Environmental Survey preliminary report, Pittsburgh Energy Technology Center, Pittsburgh, Pennsylvania  

SciTech Connect

This report presents the preliminary findings from the first phase of the Environmental Survey of the US Department of Energy (DOE) Pittsburgh Energy Technology Center (PETC) conducted December 7--11, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team specialists are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with PETC. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at PETC, and interviews with site personnel. The Survey team developed a Sampling and Analysis (S A) Plan to assist in further assessing certain environmental problems identified during its on-site Survey activities at PETC. The S A Plan will be executed by the Oak Ridge National Laboratory (ORNL). When completed, the Plan's results will be incorporated into the PETC Survey findings for inclusion into the Environmental Survey Summary Report. 64 refs., 23 figs., 29 tabs.

Not Available

1988-09-01T23:59:59.000Z

165

Technologies for environmental cleanup: Toxic and hazardous waste management  

SciTech Connect

This is the second in a series of EUROCOURSES conducted under the title, ``Technologies for Environmental Cleanup.`` To date, the series consist of the following courses: 1992, soils and groundwater; 1993, Toxic and Hazardous Waste Management. The 1993 course focuses on recent technological developments in the United States and Europe in the areas of waste management policies and regulations, characterization and monitoring of waste, waste minimization and recycling strategies, thermal treatment technologies, photolytic degradation processes, bioremediation processes, medical waste treatment, waste stabilization processes, catalytic organic destruction technologies, risk analyses, and data bases and information networks. It is intended that this course ill serve as a resource of state-of-the-art technologies and methodologies for the environmental protection manager involved in decisions concerning the management of toxic and hazardous waste.

Ragaini, R.C.

1993-12-01T23:59:59.000Z

166

Environmental technology development through industry partnership  

Science Conference Proceedings (OSTI)

The Coherent Laser Vision System (CLVS) is being developed to provide precision real-time 3D world views to support site characterization and robotic operations and during facilities Decontamination and Decommissioning. Autonomous or semiautonomous robotic operations requires an accurate, up-to-date 3D world view. Existing technologies for real-time 3D imaging, such as AM laser radar, have limited accuracy at significant ranges and have variability in range estimates caused by lighting or surface shading. Recent advances in fiber optic component technology and digital processing components have enabled the development of a new 3D vision system based upon a fiber optic FMCW coherent laser radar. The approach includes a compact scanner with no-moving parts capable of randomly addressing all pixels. The system maintains the immunity to lighting and surface shading conditions which is characteristic to coherent laser radar. The random pixel addressability allows concentration of scanning and processing on the active areas of a scene, as is done by the human eye-brain system. The precision measurement capability of the coherent laser radar (CLR) technology has already been demonstrated in the form of the CLR 3D Mapper, of which several copies have been delivered or are under order. The CLVS system, in contrast to the CLR 3D Mapper, will have substantially greater imaging speed with a compact no-moving parts scanner, more suitable for real-time robotic operations.

Sebastion, R.L.

1995-12-31T23:59:59.000Z

167

Possible future environmental issues for fossil fuel technologies. Final report  

SciTech Connect

The work reported here was carried out for the Department of Energy's Office of Fossil Energy to identify and assess 15 to 20 major environmental issues likely to affect the implementation of fossil energy technologies between 1985 and 2000. The energy technologies specifically addressed are: oil recovery and processing; gas recovery and processing; coal liquefaction; coal gasification (surface); in situ coal gasification; direct coal combustion; advanced power systems; magnetohydrodynamics; surface oil shale retorting; and true and modified in situ oil shale retorting. Environmental analysis of these technologies included, in addition to the main processing steps, the complete fuel cycle from resource extraction to end use. The 16 environmental issues identified as those most likely for future regulatory actions and the main features of, and the possible regulatory actions associated with, each are as follows: disposal of solid waste from coal conversion and combustion technologies; water consumption by coal and oil shale conversion technologies; siting of coal conversion facilities; the carbon dioxide greenhouse effect; emission of polycyclic organic matter (POM); impacts of outer continental shelf (OCS) oil development; emission of trace elements; groundwater contamination; liquefied natural gas (LNG), safety and environmental factors; underground coal mining - health and safety; fugitive emissions from coal gasification and liquefaction - health and safety; boomtown effects; emission of fine particulates from coal, oil and oil shale technologies; emission of radioactivity from the mining and conversion of coal; emission of nitrogn oxides; and land disturbance from surface mining. (LTN)

Attaway, L.D.

1979-07-01T23:59:59.000Z

168

STATEMENT OF CONSIDERATIONS REQUEST BY CHEMICAL INDUSTRY ENVIRONMENTAL TECHNOLOGY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CHEMICAL INDUSTRY ENVIRONMENTAL TECHNOLOGY CHEMICAL INDUSTRY ENVIRONMENTAL TECHNOLOGY PROJECTS, LLC (CIETP) FOR AN ADVANCE WAIVER OF DOMESTIC AND FOREIGN PATENT RIGHTS UNDER DOE COOPERATIVE AGREEMENT NO. DE-FC02-97CH10895; W(A)-97-032; CH-0935 The Petitioner, CIETP, has requested a waiver of domestic and foreign patent rights for all subject inventions arising under the above referenced cooperative agreement and subcontracts entered thereunder. The cooperative agreement is entitled, "DOE/CIETP Vision 2020." Both the DOE and the Petitioner support programs which offer clean, energy efficient, and environmentally sound technologies. This cooperative agreement is a partnership based on these similar missions and strategies to facilitate collaborative effort within the chemical industry which will benefit the

169

Indonesia-Facility for Environmentally Friendly Transport Technology and  

Open Energy Info (EERE)

Indonesia-Facility for Environmentally Friendly Transport Technology and Indonesia-Facility for Environmentally Friendly Transport Technology and Measures (TRANSfer) Jump to: navigation, search Name Indonesia-Facility for Environmentally Friendly Transport Technology and Measures (TRANSfer) Agency/Company /Organization Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ) GmbH Sector Climate Focus Area Renewable Energy Topics Adaptation, Low emission development planning Website http://transferproject.org/ Program Start 2010 Program End 2013 Country Indonesia South-Eastern Asia References Transfer Project[1] Low-carbon Energy Roadmaps for the Greater Antilles[2] Program Overview The increasing levels of greenhouse gas emissions produced by road traffic in developing countries are becoming a greater problem in efforts to

170

Facility for Environmentally Friendly Transport Technology and Measures  

Open Energy Info (EERE)

for Environmentally Friendly Transport Technology and Measures for Environmentally Friendly Transport Technology and Measures (TRANSfer) Jump to: navigation, search Name Facility for Environmentally Friendly Transport Technology and Measures (TRANSfer) Agency/Company /Organization Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ) GmbH Sector Climate Focus Area Renewable Energy Topics Adaptation, Low emission development planning Website http://transferproject.org/ Program Start 2010 Program End 2013 Country Colombia, Haiti, Indonesia, South Africa South America, Caribbean, South-Eastern Asia, Southern Africa References Transfer Project[1] Low-carbon Energy Roadmaps for the Greater Antilles[2] Program Overview The increasing levels of greenhouse gas emissions produced by road traffic in developing countries are becoming a greater problem in efforts to

171

Haiti-Facility for Environmentally Friendly Transport Technology and  

Open Energy Info (EERE)

Haiti-Facility for Environmentally Friendly Transport Technology and Haiti-Facility for Environmentally Friendly Transport Technology and Measures (TRANSfer) Jump to: navigation, search Name Haiti-Facility for Environmentally Friendly Transport Technology and Measures (TRANSfer) Agency/Company /Organization Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ) GmbH Sector Climate Focus Area Renewable Energy Topics Adaptation, Low emission development planning Website http://transferproject.org/ Program Start 2010 Program End 2013 Country Haiti Caribbean References Transfer Project[1] Low-carbon Energy Roadmaps for the Greater Antilles[2] Program Overview The increasing levels of greenhouse gas emissions produced by road traffic in developing countries are becoming a greater problem in efforts to prevent climate change. The project aims to provide practical support to

172

ESD Environmental Protection and Technology Co Ltd | Open Energy  

Open Energy Info (EERE)

Environmental Protection and Technology Co Ltd Environmental Protection and Technology Co Ltd Jump to: navigation, search Name ESD Environmental Protection and Technology Co Ltd Place Dongguan, Guangdong Province, China Zip 523589 Sector Solar Product A manufacturer of solar-power products. Coordinates 23.046499°, 113.735817° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":23.046499,"lon":113.735817,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

173

Colombia-Facility for Environmentally Friendly Transport Technology and  

Open Energy Info (EERE)

Colombia-Facility for Environmentally Friendly Transport Technology and Colombia-Facility for Environmentally Friendly Transport Technology and Measures (TRANSfer) Jump to: navigation, search Name Colombia-Facility for Environmentally Friendly Transport Technology and Measures (TRANSfer) Agency/Company /Organization Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ) GmbH Sector Climate Focus Area Renewable Energy Topics Adaptation, Low emission development planning Website http://transferproject.org/ Program Start 2010 Program End 2013 Country Colombia South America References Transfer Project[1] Low-carbon Energy Roadmaps for the Greater Antilles[2] Program Overview The increasing levels of greenhouse gas emissions produced by road traffic in developing countries are becoming a greater problem in efforts to

174

Energy storage technology-environmental implications of large scale utilization  

SciTech Connect

Environmental impacts for several energy storage technologies have been identified. State-of-the-art control technology options were similarly identified. Recommendations for research and development on new control technology were made where present controls were either deemed inadequate or non-existent. Specifically, the energy storage technologies under study included: advanced lead-acid battery, compressed air, underground pumped hydroelectric, flywheel, superconducting magnet and various thermal systems (sensible, latent heat and reversible chemical reaction). In addition, a preliminary study was conducted on fuel cell technology. Although not strictly classified as an energy storage system, fuel cells in conjunction with product recycling units can serve an energy storage function. A very large number of potential environmental impacts can be identified for all of these technologies. However, not all are of primary importance. Detailed discussions of a number of environmental impacts from the latest LASL study as they relate to primarily operational situations are emphasized. In addition, a brief discussion on new application for energy storage technologies and the additional costs of controls to be used for mitigation of specific impacts are also presented.

Krupka, M.C.; Moore, J.E.; Keller, W.E.; Baca, G.A.; Brasier, R.I.; Bennett, W.S.

1979-01-01T23:59:59.000Z

175

Rocky Flats Environmental Technology Site Treatment Plan Compliance Order, October 3, 1995 Summary  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Order Requiring Compliance with Site Treatment Plan Order Requiring Compliance with Site Treatment Plan No. 95-10-03-01 State Colorado Agreement Type Consent Order Legal Driver(s) FFCAct Scope Summary Approve with modifications the Proposed Site Treatment Plan for RFETS (MLLW); establish a Mixed Transuranic waste Agreement Parties DOE; Colorado Department of Public Health and Environment (CDPHE) Date 10/3/1995 SCOPE * In regard to Mixed Low-Level waste, approve with modifications the Proposed Site Treatment Plan for RFETS and require compliance by DOE with the modified and approved Site Treatment Plan. * In regard to Mixed Transuranic waste, establish and ensure compliance with an Agreement addressing compliance with the Hazardous and Solid Waste Amendments of 1984 to RCRA. ESTABLISHING MILESTONES

176

Rocky Flats Environmental Technology Site Mixed Residue Consent Order, September 24, 1999 Summary  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

9-09-24-01 9-09-24-01 State Colorado Agreement Type Consent Order Legal Driver(s) RCRA Scope Summary Substitute this Consent Order for the MR Consent Order; establish requirements for mixed residues management. Parties DOE ; Kaiser-Hill Company, LLC; Safe Sites of Colorado, LLC; Rocky Mountain Remediation Services, LLC; Colorado Department of Public Health and Environment Date 9/24/1999 SCOPE * Substitute this Consent Order for the MR Consent Order by modifying in its entirety the Settlement Agreement and Compliance Order on Consent, number 93-04-23-01, (the "MR Consent Order"). * Establish requirements for certain activities involving mixed residues management. * Establish enforceable commitment dates. ESTABLISHING MILESTONES * Provisions regarding enforceable commitment dates and the procedures to add

177

Rocky Flats Environmental Technology Site Waste Compliance Order, August 21, 1997 Summary  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7-08-21-02 7-08-21-02 State Colorado Agreement Type Consent Order Legal Driver(s) RCRA Scope Summary Establish compliance requirements and schedules for the implementation of a "Waste Chemical Project Plan" Parties DOE; Kaiser-Hill Company, LLC; Colorado Department of Public Health and Environment Date 8/21/1997 SCOPE * Establish compliance requirements and schedules for the implementation of a "Waste Chemical Project Plan" (the "Waste Chemical Plan") at RFETS. * Resolve violations of the Colorado Hazardous Waste Act and the Colorado Hazardous Waste Regulations. ESTABLISHING MILESTONES * Activities in the Waste Chemical Plan shall be completed by no later than December 31, 1999, except as to Excluded Chemicals (discussed in Paragraph 22 of this Order

178

Rocky Flats Environmental Technology Site Idle Equipment, August 21, 1997 Summary  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Number: 97-08-21-01 Number: 97-08-21-01 State Colorado Agreement Type Consent Order Legal Driver(s) RCRA Scope Summary Establish compliance requirements and schedules for the implementation of 1) the Management Plan for Material Contained in Idle Equipment, 2) the 1997 Hazardous Waste Tank Management Plan Parties DOE; Kaiser-Hill Company, LLC; Colorado Department of Public Health and Environment (CDPHE) Date 8/21/1997 SCOPE * Establish compliance requirements and schedules for the implementation of 1) the Management Plan for Material Contained in Idle Equipment, 2) the 1997 Hazardous Waste Tank Management Plan. * Resolve violations of the Colorado Hazardous Waste Act and the Colorado Hazardous Waste Regulations identified therein. ESTABLISHING MILESTONES * DOE and K-H shall annually submit to the Department, for information only, a

179

Preparation of environmental analyses for synfuel and unconventional gas technologies  

DOE Green Energy (OSTI)

Government agencies that offer financial incentives to stimulate the commercialization of synfuel and unconventional gas technologies usually require an analysis of environmental impacts resulting from proposed projects. This report reviews potentially significant environmental issues associated with a selection of these technologies and presents guidance for developing information and preparing analyses to address these issues. The technologies considered are western oil shale, tar sand, coal liquefaction and gasification, peat, unconventional gas (western tight gas sands, eastern Devonian gas shales, methane from coal seams, and methane from geopressured aquifers), and fuel ethanol. Potentially significant issues are discussed under the general categories of land use, air quality, water use, water quality, biota, solid waste disposal, socioeconomics, and health and safety. The guidance provided in this report can be applied to preparation and/or review of proposals, environmental reports, environmental assessments, environmental impact statements, and other types of environmental analyses. The amount of detail required for any issue discussed must, by necessity, be determined on a case-by-case basis.

Reed, R.M. (ed.)

1982-09-01T23:59:59.000Z

180

Environmental Energy Technologies Division Electricity Markets and Policy Group Supporting Solar Power in  

E-Print Network (OSTI)

Environmental Energy Technologies Division Electricity Markets and Policy Group Supporting Solar the impact of RPS policies on solar growth 2 #12;Environmental Energy Technologies Division Electricity by: the Office of Energy Efficiency and Renewable Energy (Solar Energy Technologies Program

Note: This page contains sample records for the topic "flats environmental technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Energy technologies and the environment: Environmental information handbook  

DOE Green Energy (OSTI)

This revision of Energy Technologies and the Environment reflects the changes in energy supply and demand, focus of environmental concern, and emphasis of energy research and development that have occurred since publication of the earlier edition in 1980. The increase in availability of oil and natural gas, at least for the near term, is responsible in part for a reduced emphasis on development of replacement fuels and technologies. Trends in energy development also have been influenced by an increased reliance on private industry initiatives, and a correspondingly reduced government involvement, in demonstrating more developed technologies. Environmental concerns related to acid rain and waste management continue to increase the demand for development of innovative energy systems. The basic criteria for including a technology in this report are that (1) the technology is a major current or potential future energy supply and (2) significant changes in employing or understanding the technology have occurred since publication of the 1980 edition. Coal is seen to be a continuing major source of energy supply, and thus chapters pertaining to the principal coal technologies have been revised from the 1980 edition (those on coal mining and preparation, conventional coal-fired power plants, fluidized-bed combustion, coal gasification, and coal liquefaction) or added as necessary to include emerging technologies (those on oil shale, combined-cycle power plants, coal-liquid mixtures, and fuel cells).

Not Available

1988-10-01T23:59:59.000Z

182

UTILIZING THE RIGHT MIX OF ENVIRONMENTAL CLEANUP TECHNOLOGIES  

Science Conference Proceedings (OSTI)

The Savannah River Site (SRS) Figure 1 is a 310-square-mile United States Department of Energy nuclear facility located along the Savannah River near Aiken, South Carolina. During operations, which started in 1951, hazardous substances (chemicals and radionuclides) were released to the environment. The releases occurred as a result of inadvertent spills and waste disposal in unlined pits and basins which was common practice before environmental regulations existed. The hazardous substances have migrated to the vadose zone and groundwater in many areas of the SRS, resulting in 515 waste units that are required by environmental regulations, to undergo characterization and, if needed, remediation. In the initial years of the SRS environmental cleanup program (early 1990s), the focus was to use common technologies (such as pump and treat, air stripping, excavation and removal) that actively and tangibly removed contamination. Exclusive use of these technologies required continued and significant funding while often failing to meet acceptable clean-up goals and objectives. Recognizing that a more cost-effective approach was needed, SRS implemented new and complementary remediation methods focused on active and passive technologies targeted to solve specific remediation problems. Today, SRS uses technologies such as chemical/pH-adjusting injection, phytoremediation, underground cutoff walls, dynamic underground stripping, soil fracturing, microbial degradation, baroballs, electrical resistance heating, soil vapor extraction, and microblowers to more effectively treat contamination at lower costs. Additionally, SRS's remediation approach cost effectively maximizes cleanup as SRS works proactively with multiple regulatory agencies. Using GIS, video, animation, and graphics, SRS is able to provide an accurate depiction of the evolution of SRS groundwater and vadose zone cleanup activities to convince stakeholders and regulators of the effectiveness of various cleanup technologies. Remediating large, complex groundwater plumes using state of-the art technologies and approaches is a hallmark of years of experience and progress. Environmental restoration at SRS continues to be a challenging and dynamic process as new cleanup technologies and approaches are adopted.

Bergren, C; Wade Whitaker, W; Mary Flora, M

2007-05-25T23:59:59.000Z

183

Energy & Environmental Technology Applications Center | Open Energy  

Open Energy Info (EERE)

Environmental Technology Applications Center Environmental Technology Applications Center Jump to: navigation, search Logo: Energy & Environmental Technology Applications Center Name Energy & Environmental Technology Applications Center Address 257 Fuller Rd. Place Albany, New York Zip 12203 Number of employees 11-50 Year founded 1998 Phone number 518-956-7364 Notes Renewable energy center at the College of Nanoscale Science & Engineering Coordinates 42.6878888°, -73.8324857° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.6878888,"lon":-73.8324857,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

184

Coal supply and cost under technological and environmental uncertainty  

E-Print Network (OSTI)

Coal supply and cost under technological and environmental uncertainty Submitted in partial, and Rod Lawrence at Foundation Coal. I received a lot of feedback and input on this report, and would like chapters. My conversations with Kurt Walzer at Clean Air Task Force and Rory McIlmoil at Coal Valley Wind

185

National conference on environmental remediation science and technology: Abstracts  

Science Conference Proceedings (OSTI)

This conference was held September 8--10, 1998 in Greensboro, North Carolina. The purpose of this conference was to provide a multidisciplinary forum for exchange of state-of-the-art information on methods and site characterization technologies for environmental monitoring and remedial action planning of hazardous materials. This report contains the abstracts of sixty-one papers presented at the conference.

NONE

1998-12-31T23:59:59.000Z

186

BENEFIT ANALYSIS OF ENVIRONMENTAL DATA SETS TECHNOLOGY NAME: Environmental Visualization System Pro (EVS-PRO)  

E-Print Network (OSTI)

Program (ETV) to facilitate the deployment of innovative or improved environmental technologies through performance verification and dissemination of information. The goal of the ETV Program is to further environmental protection by substantially accelerating the acceptance and use of improved and cost-effective technologies. ETV seeks to achieve this goal by providing high-quality, peer-reviewed data on technology performance to those involved in the design, distribution, financing, permitting, purchase, and use of environmental technologies. ETV works in partnership with recognized standards and testing organizations and stakeholder groups consisting of regulators, buyers, and vendor organizations, with the full participation of individual technology developers. The program evaluates the performance of innovative technologies by developing test plans that are responsive to the needs of stakeholders, conducting field or laboratory tests (as appropriate), collecting and analyzing data, and preparing peer-reviewed reports. All evaluations are conducted in accordance with rigorous quality assurance protocols to ensure that data of known and adequate quality are generated and that the results are defensible. The Site Characterization and Monitoring Technologies Pilot (SCMT), one of 12 technology areas under

unknown authors

2000-01-01T23:59:59.000Z

187

Emerging Environmental Technologies: An Analysis of New Treatment Technologies for the California Energy Commission  

Science Conference Proceedings (OSTI)

As the state's principal agency dedicated to energy policy and planning, the California Energy Commission is charged with the responsibility of developing energy technologies and promoting energy efficiency. This report describes an effort by EPRI to identify emerging electric-based environmental treatment technologies on which the Commission should focus research efforts.

2003-04-16T23:59:59.000Z

188

Distributed utility technology cost, performance, and environmental characteristics  

Science Conference Proceedings (OSTI)

Distributed Utility (DU) is an emerging concept in which modular generation and storage technologies sited near customer loads in distribution systems and specifically targeted demand-side management programs are used to supplement conventional central station generation plants to meet customer energy service needs. Research has shown that implementation of the DU concept could provide substantial benefits to utilities. This report summarizes the cost, performance, and environmental and siting characteristics of existing and emerging modular generation and storage technologies that are applicable under the DU concept. It is intended to be a practical reference guide for utility planners and engineers seeking information on DU technology options. This work was funded by the Office of Utility Technologies of the US Department of Energy.

Wan, Y.; Adelman, S.

1995-06-01T23:59:59.000Z

189

Advances in Materials Science for Environmental and Energy Technologies II  

SciTech Connect

The Materials Science and Technology 2012 Conference and Exhibition (MS&T'12) was held October 7-11, 2012, in Pittsburgh, Pennsylvania. One of the major themes of the conference was Environmental and Energy Issues. Papers from five of the symposia held under that theme are invluded in this volume. These symposia included Materials Issues in Nuclear Waste Management for the 21st Century; Green Technologies for Materials Manufacturing and Processing IV; Energy Storage: Materials, Systems and Applications; Energy Conversion-Photovoltaic, Concentraing Solar Power and Thermoelectric; and Materials Development for Nuclear Applications and Extreme Environments.

Matyas, Dr Josef [Pacific Northwest National Laboratory (PNNL); Ohji, Tatsuki [Advanced Manufacturing Research Institute, National Institute of Advanced Industrial Science and Tec; Liu, Xingbo [West Virginia University, Morgantown; Paranthaman, Mariappan Parans [ORNL; Devanathan, Ram [Pacific Northwest National Laboratory (PNNL); Fox, Kevin [Savannah River National Laboratory (SRNL); Singh, Mrityunjay [NASA-Glenn Research Center, Cleveland; Wong-ng, Winnie [National Institute of Standards and Technology (NIST), Gaithersburg, MD

2013-01-01T23:59:59.000Z

190

International Center for Environmental Technology Transfer | Open Energy  

Open Energy Info (EERE)

Transfer Transfer Jump to: navigation, search Logo: International Center for Environmental Technology Transfer Name International Center for Environmental Technology Transfer Place Yokkaichi, Japan Year founded 1990 Coordinates 34.9651567°, 136.6244847° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":34.9651567,"lon":136.6244847,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

191

Analysis of the environmental control technology for oil shale development  

SciTech Connect

The environmental control technology proposed in the various oil shale projects which are under development are examined. The technologies for control of air pollution, water pollution, and for the disposal, stabilization, and vegetation of the processed shale were thoroughly investigated. Although some difficulties may be encountered in any of these undertakings, it seems clear that the air and water pollution problems can be solved to meet any applicable standard. There are no published national standards against which to judge the stabilization and vegetation of the processed shale. However, based on the goal of producing an environmentally and aesthetically acceptable finished processed shale pile, it seems probable that this can be accomplished. It is concluded that the environmental control technology is available to meet all current legal requirements. This was not the case before Colorado changed their applicable Air Pollution regulations in August of 1977; the previous ones for the oil shale region were sufficiently stringent to have caused a problem for the current stage of oil shale development. Similarly, the federal air-quality, non-deterioration regulations could be interpreted in the future in ways which would be difficult for the oil shale industry to comply with. The Utah water-quality, non-deterioration regulations could also be a problem. Thus, the only specific regulations which may be a problem are the non-deterioration parts of air and water quality regulations. The unresolved areas of environmental concern with oil shale processing are mostly for the problems not covered by existing environmental law, e.g., trace metals, polynuclear organics, ground water-quality changes, etc. These may be problems, but no evidence is yet available that these problems will prevent the successful commercialization of oil shale production.

de Nevers, N.; Eckhoff, D.; Swanson, S.; Glenne, B.; Wagner, F.

1978-02-01T23:59:59.000Z

192

Technology Solutions for Mitigating Environmental Impacts of Oil and Gas E&P Activity  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Solutions for Mitigating Technology Solutions for Mitigating Environmental Impacts of Oil and Gas E&P Activity The mission of the Environmental Program is to promote a reliable, affordable, and secure supply of domestic oil and clean-burning natural gas, by providing cost-effective environmental regulatory compliance technologies, enhancing environmental protections during oil and gas E&P operations, and facilitating the development and use of scientific, risk-based environmental regulatory frameworks.

193

Environmental Energy Technologies Division Energy Analysis Department Meeting Expectations: A Review of  

E-Print Network (OSTI)

Environmental Energy Technologies Division · Energy Analysis Department · Load Covered: Roughly 40% of U.S. loadEnvironmental Energy Technologies Division · Energy Analysis Department Meeting Expectations@lbl.gov (510.486.5474) March 2006 #12;Presentation Overview Environmental Energy Technologies Division · Energy

194

Applying environmental externalities to US Clean Coal Technologies for Asia. [Including external environmental costs  

SciTech Connect

The United States is well positioned to play an expanding role in meeting the energy technology demands of the Asian Pacific Basin, including Indonesia, Thailand, and the Republic of China (ROC-Taiwan). The US Department of Energy Clean Coal Technology (CCT) Demonstration Program provides a proving ground for innovative coal-related technologies that can be applied domestically and abroad. These innovative US CCTs are expected to satisfy increasingly stringent environmental requirements while substantially improving power generation efficiencies. They should also provide distinct advantages over conventional pulverized coal-fired combustors. Finally, they are expected to be competitive with other energy options currently being considered in the region. This paper presents potential technology scenarios for Indonesia, Thailand, and the ROC-Taiwan and considers an environmental cost-benefit approach employing a newly developed method of applying environmental externalities. Results suggest that the economic benefits from increased emission control can indeed be quantified and used in cost-benefit comparisons, and that US CCTs can be very cost effective in reducing emissions.

Szpunar, C.B.; Gillette, J.L.

1993-01-01T23:59:59.000Z

195

Comparing energy technology alternatives from an environmental perspective  

DOE Green Energy (OSTI)

A number of individuals and organizations advocate the use of comparative, formal analysis to determine which are the safest methods for producing and using energy. Some have suggested that the findings of such analyses should be the basis upon which final decisions are made about whether to actually deploy energy technologies. Some of those who support formal comparative analysis are in a position to shape the policy debate on energy and environment. An opposing viewpoint is presented, arguing that for technical reasons, analysis can provide no definitive or rationally credible answers to the question of overall safety. Analysis has not and cannot determine the sum total of damage to human welfare and ecological communities from energy technologies. Analysis has produced estimates of particular types of damage; however, it is impossible to make such estimates comparable and commensurate across different classes of technologies and environmental effects. As a result of the deficiencies, comparative analysis connot form the basis of a credible, viable energy policy. Yet, without formal comparative analysis, how can health, safety, and the natural environment be protected. This paper proposes a method for improving the Nation's approach to this problem. The proposal essentially is that health and the environment should be considered as constraints on the deployment of energy technologies, constraints that are embodied in Government regulations. Whichever technologies can function within these constraints should then compete among themselves. This competition should be based on market factors like cost and efficiency and on political factors like national security and the questions of equity.

House, P.W.; Coleman, J.A.; Shull, R.D.; Matheny, R.W.; Hock, J.C.

1981-02-01T23:59:59.000Z

196

NETL: News Release - New Technologies that Enhance Environmental  

NLE Websites -- All DOE Office Websites (Extended Search)

13, 2011 13, 2011 New Technologies that Enhance Environmental Protection, Increase Domestic Production, Result from DOE-Supported Consortium Cost-Cutting Technologies Developed Through SWC Maximize Oil and Natural Gas Recovery, Enhance Energy Security Washington, DC - New technologies that help small, independent oil and natural gas operators contribute to domestic energy production while improving environmental protection have resulted from U.S. Department of Energy (DOE) support of the Stripper Well Consortium (SWC). "Stripper wells" are wells that produce less than 10 barrels of oil or 60,000 standard cubic feet of natural gas per day. According to the Interstate Oil and Gas Compact Commission, more than 375,000 U.S. stripper oil wells account for nearly 720,000 barrels of oil per day, or about 20 percent of the U.S. production. More than 322,000 stripper natural gas wells produce over 2 trillion standard cubic feet of natural gas annually, or 19 percent of the total U.S. natural gas production.

197

Oil shale: potential environmental impacts and control technology. Environmental research brief  

SciTech Connect

The U.S. Environmental Protection Agency's Industrial Environmental Research Laboratory in Cincinnati, Ohio (IERL-Ci) has performed research related to oil shale processing and disposal since 1973. This research is in support of the Clean Air Act, The Federal Water Pollution Control Act, the Resource Conservation and Recovery Act, the Safe Drinking Water Act, and the Toxic Substances Control Act. Potential environmental impacts from oil shale development activities have been identified and potential control technologies are being evaluated through a combination of laboratory and field tests on actual oil shale waste streams. This paper discusses recent results from this program. Included are field test results on control of sulfur gases at Occidental Oil Shale's Logan Wash Site and Geokinetic's Kamp Kerogen Site, wastewater treatability studies on retort water and gas condensate at Logan Wash, and results of laboratory and field testing on raw and retorted oil shales.

Bates, E.R.; Liberick, W.W.; Burckle, J.

1984-03-01T23:59:59.000Z

198

DOE's Rocky Flats Cleanup Site Named 2006 Project of the Year By Project  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE's Rocky Flats Cleanup Site Named 2006 Project of the Year By DOE's Rocky Flats Cleanup Site Named 2006 Project of the Year By Project Management Institute DOE's Rocky Flats Cleanup Site Named 2006 Project of the Year By Project Management Institute October 23, 2006 - 9:17am Addthis WASHINGTON, DC - The U.S. Department of Energy (DOE) today announced that the Project Management Institute (PMI) has awarded its 2006 Project of the Year to DOE's Rocky Flats Environmental Technology Site. The award was presented to DOE contractor Kaiser-Hill, LLC during the PMI Global Congress Dinner 2006 on Saturday, October 21st, 2006 in Seattle, Washington. "It is a great honor for the Department of Energy's Rocky Flats safe cleanup and closure effort to be recognized with this prestigious award," James Rispoli, Assistant Secretary of Energy for Environmental

199

DOE's Rocky Flats Cleanup Site Named 2006 Project of the Year By Project  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE's Rocky Flats Cleanup Site Named 2006 Project of the Year By DOE's Rocky Flats Cleanup Site Named 2006 Project of the Year By Project Management Institute DOE's Rocky Flats Cleanup Site Named 2006 Project of the Year By Project Management Institute October 23, 2006 - 9:17am Addthis WASHINGTON, DC - The U.S. Department of Energy (DOE) today announced that the Project Management Institute (PMI) has awarded its 2006 Project of the Year to DOE's Rocky Flats Environmental Technology Site. The award was presented to DOE contractor Kaiser-Hill, LLC during the PMI Global Congress Dinner 2006 on Saturday, October 21st, 2006 in Seattle, Washington. "It is a great honor for the Department of Energy's Rocky Flats safe cleanup and closure effort to be recognized with this prestigious award," James Rispoli, Assistant Secretary of Energy for Environmental

200

Pacific Northwest Laboratory environmental technologies available for deployment  

SciTech Connect

The Department of Energy created the Office of Environmental Management (EM) to conduct a 30-year plus, multi-billion dollar program to manage the wastes and cleanup the legacy from over fifty years of nuclear material production. Across the DOE System there are thousands of sites containing millions of metric tons of buried wastes and contaminated soils and groundwater. Additionally, there are nearly 400,000 m{sup 3} of highly radioactive wastes in underground storage tanks, over 1,400 different mixed-waste streams, and thousands of contaminated surplus facilities, some exceeding 200,000 m{sup 2} in size. Costs to remediate all these problems have been estimated to be as much as several hundred billion dollars. The tremendous technical challenges with some of the problems and the high costs of using existing technologies has led the Department to create the Office of Technology Development (TD) to lead an aggressive, integrated national program to develop and deploy the needed advanced, cost-effective technologies. This program is developing technologies for all major cleanup steps: assessment, characterization, retrieval, treatment, final stabilization, and disposal. Work is focused on the Department`s five major problem areas: High-Level Waste Tank Remediation; Contaminant Plume Containment and Remediation; Mixed Waste Characterization, Treatment, and Disposal; Contaminated Soils and Buried Wastes Facility Transitioning, Decommissioning, and Final Disposal.

Slate, S.C.

1994-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "flats environmental technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

History of Uranium-233(sup233U)Processing at the Rocky Flats Plant. In support of the RFETS Acceptable Knowledge Program  

Science Conference Proceedings (OSTI)

This report documents the processing of Uranium-233 at the Rocky Flats Plant (Rocky Flats Environmental Technology Site). The information may be used to meet Waste Isolation Pilot Plant (WIPP) Waste Acceptance Criteria (WAC)and for determining potential Uranium-233 content in applicable residue waste streams.

Moment, R.L.; Gibbs, F.E.; Freiboth, C.J.

1999-04-01T23:59:59.000Z

202

W. E. Mott, Director, Division of Environmental Control Technology, HQ  

Office of Legacy Management (LM)

Eyergy Eyergy pak t??pEOperatlons dak Ridge, Tennessee 37830 December 12, 1977 W. E. Mott, Director, Division of Environmental Control Technology, HQ Germantown, M.S. E-201 REPORT OF FINDINGS: ALLIED CHEMICAL CORPORATION SITES AT NORTH CLAYMONT, DELAWARE; MARCUS HOOK, PENNSYLVANIA, AND BALTIMORE, MARYLAND The following information summarizes our findings and conclusions relative to the reassessment of the subject sites. Information supplied from files of the former Atomic Energy Commission, Division of Raw Materials, indicates the company was engaged during the 1950's in research and development and pilot scale operations on uranium recovery at North Claymont, Delaware, and possibly at other Allied Chemical sites at Marcus Hook, Pa., and Baltimore, Md. under

203

Environmental Energy Technologies Division An Evaluation of Solar Valuation  

NLE Websites -- All DOE Office Websites (Extended Search)

An Evaluation of Solar Valuation An Evaluation of Solar Valuation Methods Used in Utility Planning and Procurement Processes Andrew Mills and Ryan Wiser Lawrence Berkeley National Laboratory - Report Summary - December 2012 The work described in this presentation was funded by the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy and Office of Electricity Delivery and Energy Reliability 2 Environmental Energy Technologies Division Motivation and scope * Motivations: * As the cost of solar generation falls, solar is being considered as one of many viable options for supplying electricity * Recognizing and evaluating the economic value of solar will become progressively important for justifying its expanded use * Objectives: * Analyze the treatment of solar in current planning studies and

204

Adapting Wireless Technology to Lighting Control and Environmental Sensing  

SciTech Connect

The high cost of retrofitting buildings with advanced lighting control systems is a barrier to adoption of this energy-saving technology. Wireless technology, however, offers a solution to mounting installation costs since it requires no additional wiring to implement. To demonstrate the feasibility of such a system, a prototype wirelessly-controlled advanced lighting system was designed and built. The system includes the following components: a wirelessly-controllable analog circuit module (ACM), a wirelessly-controllable electronic dimmable ballast, a T8 3-lamp fixture, an environmental multi-sensor, a current transducer, and control software. The ACM, dimmable ballast, multi-sensor, and current transducer were all integrated with SmartMesh{trademark} wireless mesh networking nodes, called motes, enabling wireless communication, sensor monitoring, and actuator control. Each mote-enabled device has a reliable communication path to the SmartMesh Manager, a single board computer that controls network functions and connects the wireless network to a PC running lighting control software. The ACM is capable of locally driving one or more standard 0-10 Volt electronic dimmable ballasts through relay control and a 0-10 Volt controllable output. The mote-integrated electronic dimmable ballast is designed to drive a standard 3-lamp T8 light fixture. The environmental multi-sensor measures occupancy, light level and temperature. The current transducer is used to measure the power consumed by the fixture. Control software was developed to implement advanced lighting algorithms, including daylight ramping, occupancy control, and demand response. Engineering prototypes of each component were fabricated and tested in a bench-scale system. Based on standard industry practices, a cost analysis was conducted. It is estimated that the installation cost of a wireless advanced lighting control system for a retrofit application is at least 30% lower than a comparable wired system for a typical 16,000 square-foot office building, with a payback period of less than 3 years.

Dana Teasdale; Francis Rubinstein; Dave Watson; Steve Purdy

2005-10-01T23:59:59.000Z

205

EA-0995: Drum Storage Facility for Interim Storage of Materials Generated by Environmental Restoration Operations, Golden, Colorado  

Energy.gov (U.S. Department of Energy (DOE))

This EA evaluates the environmental impacts of the proposal to construct and operate a drum storage facility at the U.S. Department of Energy's Rocky Flats Environmental Technology Site in Golden,...

206

Projects at the Western Environmental Technology Office. Quarterly technical progress report, April 1--June 30, 1995  

Science Conference Proceedings (OSTI)

This report contains brief outlines of the multiple projects under the responsibility of the Western Environmental Technology Office in Butte Montana. These projects include biomass remediation, remediation of contaminated soils, mine waste technology, and several other types of remediation.

NONE

1995-08-01T23:59:59.000Z

207

Adapting Wireless Technology to Lighting Control and Environmental Sensing  

SciTech Connect

Although advanced lighting control systems offer significant energy savings, the high cost of retrofitting buildings with advanced lighting control systems is a barrier to adoption of this energy-saving technology. Wireless technology, however, offers a solution to mounting installation costs since it requires no additional wiring to implement. To demonstrate the feasibility of such a system, a prototype wirelessly-controlled advanced lighting system was designed and built. The system includes the following components: a wirelessly-controllable analog circuit module (ACM), a wirelessly-controllable electronic dimmable ballast, a T8 3-lamp fixture, an environmental multi-sensor, a current transducer, and control software. The ACM, dimmable ballast, multi-sensor, and current transducer were all integrated with SmartMesh{trademark} wireless mesh networking nodes, called motes, enabling wireless communication, sensor monitoring, and actuator control. Each mote-enabled device has a reliable communication path to the SmartMesh Manager, a single board computer that controls network functions and connects the wireless network to a PC running lighting control software. The ACM is capable of locally driving one or more standard 0-10 Volt electronic dimmable ballasts through relay control and a 0-10 Volt controllable output, in addition to 0-24 Volt and 0-10 Volt inputs. The mote-integrated electronic dimmable ballast is designed to drive a standard 3-lamp T8 light fixture. The environmental multisensor measures occupancy, light level and temperature. The current transducer is used to measure the power consumed by the fixture. Control software was developed to implement advanced lighting algorithms, including open and closed-loop daylight ramping, occupancy control, and demand response. Engineering prototypes of each component were fabricated and tested in a bench-scale system. Based on standard industry practices, a cost analysis was conducted. It is estimated that the installation cost of a wireless advanced lighting control system for a retrofit application is at least 20% lower than a comparable wired system for a typical 16,000 square-foot office building, with a payback period of less than 3 years. At 30% market penetration saturation, a cumulative 695 Billion kWh of energy could be saved through 2025, a cost savings of $52 Billion.

Dana Teasdale; Francis Rubinstein; David S. Watson; Steve Purdy

2006-04-30T23:59:59.000Z

208

Environmental Energy Technologies Division Energy Analysis Department The Treatment of Solar  

E-Print Network (OSTI)

@lbl.gov (510.486.5474) Prepared for the U.S. Department of Energy April 2007 #12;Environmental Energy Technologies Division · Energy Analysis Department EIA Analysis of Federal RPS Proposals · U.S. EnergyEnvironmental Energy Technologies Division · Energy Analysis Department The Treatment of Solar

209

Environmental-control-technology activities of the Department of Energy in FY 1979  

SciTech Connect

This report provides an annual identification and summarization of environmental control RD and D activities and associated funding conducted by DOE in conjunction with developing environmentally acceptable energy technologies. Environmental control technology is an integral part of the DOE energy technology R, D, and D effort. As the third in a series of annual reports on environmental control R, D, and D activities within DOE, this report may serve as a basis for evaluating program trends. The report presents background material that contributes to the capability to evaluate and assess the environmental control accomplishments, issues, gaps, and overlaps associated with energy development within DOE, in conjunction with other agencies, and in the private sector. A measure of the change in emphasis in the environmental control technology activities within DOE is also presented, indicating shifts, if any, in funding levels for each of the energy technologies. Total DOE FY 1979 budget outlay allocated to environmental control activities was $421,533,000, or 5.0% of the total FY 1979 DOE budget. This report summarizes the inputs received from the energy technology areas. These inputs were submitted in accordance with a description of environmental control related activities, which are those activities directed at research, development, and demonstration of processes, procedures, systems, subsystems, and strategies that directly or indirectly eliminate, minimize, or mitigate environmental impacts. 25 references, 10 figures, 40 tables.

1980-06-01T23:59:59.000Z

210

TECHNOLOGY TYPE: ENVIRONMENTAL DECISION SUPPORT SOFTWARE APPLICATION: VISUALIZATION, SAMPLE OPTIMIZATION, AND COST- BENEFIT ANALYSIS OF ENVIRONMENTAL DATA SETS  

E-Print Network (OSTI)

Program (ETV) to facilitate the deployment of innovative or improved environmental technologies through performance verification and dissemination of information. The goal of the ETV Program is to further environmental protection by substantially accelerating the acceptance and use of improved and cost-effective technologies. ETV seeks to achieve this goal by providing high-quality, peer-reviewed data on technology performance to those involved in the design, distribution, financing, permitting, purchase, and use of environmental technologies. ETV works in partnership with recognized standards and testing organizations and stakeholder groups consisting of regulators, buyers, and vendor organizations, with the full participation of individual technology developers. The program evaluates the performance of innovative technologies by developing test plans that are responsive to the needs of stakeholders, conducting field or laboratory tests (as appropriate), collecting and analyzing data, and preparing peer-reviewed reports. All evaluations are conducted in accordance with rigorous quality assurance protocols to ensure that data of known and adequate quality are generated and that the results are defensible. The Site Characterization and Monitoring Technologies Pilot (SCMT), one of 12 technology areas under ETV, is administered by EPAs National Exposure Research Laboratory (NERL). With the support of the U.S.

unknown authors

2000-01-01T23:59:59.000Z

211

Flat | Open Energy Information  

Open Energy Info (EERE)

Flat Flat Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Print PDF Flat Dictionary.png Flat: A relatively smooth landscape with no topographic relief Other definitions:Wikipedia Reegle Topographic Features List of topographic features commonly encountered in geothermal resource areas: Mountainous Horst and Graben Shield Volcano Flat Lava Dome Stratovolcano Cinder Cone Caldera Depression Resurgent Dome Complex The North Brawley Geothermal Power Plant is located in the Imperial Valley, California, a broad valley with flat topographic features. http://www.pcl.com/Projects-that-Inspire/Pages/North-Brawley-Geothermal-Power-Plant.aspx# Flat terrains are characterized by the absence of major topographic features. Flat topography is typically encountered in areas that have

212

Major Environmental Aspects of Gasification-Based Power Generation Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Detailed Evaluation of the Environmental Performance of Gasification-Based Power Systems Detailed Evaluation of the Environmental Performance of Gasification-Based Power Systems DECEMBER 2002 U.S. DOE/NETL 2-1 2. DETAILED EVALUATION OF THE ENVIRONMENTAL PERFORMANCE OF GASIFICATION-BASED POWER SYTEMS 2.1 Introduction and Summary of Information Presented The single most compelling reason for utilities to consider coal gasification for electric power generation is superior environmental performance. 1 As shown in Figure 2-1, gasification has fundamental environmental advantages over direct coal combustion. Commercial-scale plants for both integrated gasification combined cycle (IGCC) electric power generation and chemicals applications have already successfully demonstrated these advantages. The superior environmental capabilities of coal gasification apply to all three areas of concern: air emissions,

213

Integrating environmental considerations in technology selections under uncertainty  

E-Print Network (OSTI)

Competition requires companies to make decisions that satisfy multiple criteria. Considering profitability alone is no longer sufficient. Ignoring environmental considerations will not only expose a company to potential ...

Chen, Yue (Yue Nina)

2005-01-01T23:59:59.000Z

214

Identification And Prioritization Of Environmentally Beneficial Intelligent Transportation Technologies  

E-Print Network (OSTI)

trend in environmental policy is the increasing use of market-based approaches, with the latest example in California being the energy

Shaheen, S.; Young, T.; Sperling, D.; Jordan, D.; Horan, T.

1998-01-01T23:59:59.000Z

215

Major Environmental Aspects of Gasification-Based Power Generation Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Detailed Detailed Evaluation of the Environmental Performance of Gasification-Based Power Systems DECEMBER 2002 U.S. DOE/NETL 2-1 2. DETAILED EVALUATION OF THE ENVIRONMENTAL PERFORMANCE OF GASIFICATION-BASED POWER SYTEMS 2.1 Introduction and Summary of Information Presented The single most compelling reason for utilities to consider coal gasification for electric power generation is superior environmental performance. 1 As shown in Figure 2-1, gasification has fundamental environmental advantages over direct coal combustion. Commercial-scale plants for both integrated gasification combined cycle (IGCC) electric power generation and chemicals applications have already successfully demonstrated these advantages. The superior environmental capabilities of coal gasification apply to all three areas of concern: air emissions, water discharges, and solid

216

Rocky Flats Cleanup Agreement implementation successes and challenges  

SciTech Connect

On July 19, 1996 the US Department of Energy (DOE), State of Colorado (CDPHE), and US Environmental Protection Agency (EPA) entered into an agreement called the Rocky Flats Cleanup Agreement (RFCA) for the cleanup and closure of the Rocky Flats Environmental Technology Site (RFETS or Rocky Flats). Major elements of the agreement include: an Integrated Site-Wide Baseline; up to twelve significant enforceable milestones per year; agreed upon soil and water action levels and standards for cleanup; open space as the likely foreseeable land use; the plutonium and TRU waste removed by 2015; streamlined regulatory process; agreement with the Defense Nuclear Facilities Safety Board (DNFSB) to coordinate activities; and a risk reduction focus. Successful implementation of RFCA requires a substantial effort by the parties to change their way of thinking about RFETS and meet the deliverables and commitments. Substantial progress toward Site closure through the implementation of RFCA has been accomplished in the short time since the signing, yet much remains to be done. Much can be learned from the Rocky Flats experience by other facilities in similar situations.

Shelton, D.C.

1997-02-01T23:59:59.000Z

217

Environmental Assessment Appendix A for Changing World Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

fund a portion of the project through the Society for Environmental and Energy Research(SEER), a non-profit organization for research,developmentand training related to energy...

218

Development of a comprehensive environmental technologies list for the U.S. Department of Energy  

Science Conference Proceedings (OSTI)

With lessons learned through the initial assessment of energy technologies and with a new vision outlined in DOE`s new strategic plan, the Office of Policy determined that assessment of R&D activities should extend beyond energy technologies and consider all DOE technology R&D programs, including environmental and dual-benefit defense programs. Of particular importance is the consideration of how well environmental technology R&D activities support the paradigm shift toward sustainable development. Sustainable development, defined in the Clinton Administration`s Report titled Technology for a Sustainable Future as {open_quotes}development that meets the needs of the present without compromising the ability of future generations to meet their own needs,{close_quotes} is dependent on effective environmental technologies. The importance of environmental technologies is echoed in DOE`s Strategic Plan in which one specific goal is stated as: {open_quotes}By the Year 2005, [DOE will] be a leading Federal Agency in environmental technology development focused on the Nation`s needs.{close_quotes}

Lombardi, D.A. [Oak Ridge National Lab., TN (United States); Di Massa, F.V. [Pacific Northwest Lab., Richland, WA (United States)

1995-06-01T23:59:59.000Z

219

Environmental benefits of advanced oil and gas exploration and production technology  

SciTech Connect

THROUGHOUT THE OIL AND GAS LIFE CYCLE, THE INDUSTRY HAS APPLIED AN ARRAY OF ADVANCED TECHNOLOGIES TO IMPROVE EFFICIENCY, PRODUCTIVITY, AND ENVIRONMENTAL PERFORMANCE. THIS REPORT FOCUSES SPECIFICALLY ON ADVANCES IN EXPLORATION AND PRODUCTION (E&P) OPERATIONS.

1999-10-01T23:59:59.000Z

220

DOE/EA-1652: Final Environmental Assessment Wind Technology Testing Center (August 2009)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Wind Technology Testing Center Boston, Massachusetts August 2009 DOE/EA-1652 Department of Energy National Renewable Energy Laboratory 1617 Cole Boulevard Golden, CO 80401-3393 NREL - ENVIRONMENTAL ASSESSMENT FOR THE WIND TECHNOLOGY TESTING CENTER, BOSTON, M.A. FINAL EA, AUGUST 2009 i Table of Contents SUMMARY ................................................................................................................................. S-1 1.0 INTRODUCTION ............................................................................................................... 1 1.1 THE NATIONAL ENVIRONMENTAL POLICY ACT AND RELATED PROCEDURES ................................ 1 1.2 PURPOSE AND NEED ....................................................................................................................... 2

Note: This page contains sample records for the topic "flats environmental technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Combustion technology developments in power generation in response to environmental challenges  

E-Print Network (OSTI)

Combustion technology developments in power generation in response to environmental challenges J Abstract Combustion system development in power generation is discussed ranging from the pre-environmental era in which the objectives were complete combustion with a minimum of excess air and the capability

Kammen, Daniel M.

222

EIS-0277: Notice of Intent to Prepare an Environmental Impact Statement |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Notice of Intent to Prepare an Environmental Impact Notice of Intent to Prepare an Environmental Impact Statement EIS-0277: Notice of Intent to Prepare an Environmental Impact Statement Management of Certain Plutonium Residues and Scrub Alloy Stored at the Rocky Flats Environmental Technology Site The Department of Energy (DOE) announces its intent to prepare an Environmental Impact Statement to evaluate the potential environmental impacts associated with reasonable management alternatives for certain plutonium residues and all scrub alloy currently being stored at the Rocky Flats Environmental Technology Site in Golden, Colorado. DOE/EIS-0277, Department of Energy, Notice of Intent to Prepare an EIS on Management of Certain Plutonium Residues and Scrub Alloy Stored at the Rocky Flats Environmental Technology Site, Golden, Colorado, 61 FR 58866,

223

International technology catalogue: Foreign technologies to support the environmental restoration and waste management needs of the DOE complex  

SciTech Connect

This document represents a summary of 27 foreign-based environmental restoration and waste management technologies that have been screened and technically evaluated for application to the cleanup problems of the Department of Energy (DOE) nuclear weapons complex. The evaluation of these technologies was initiated in 1992 and completed in 1995 under the DOE`s International Technology Coordination Program of the Office of Technology Development. A methodology was developed for conducting a country-by-country survey of several regions of the world where specific environmental technology capabilities and market potential were investigated. The countries that were selected from a rank-ordering process for the survey included: then West Germany, the Netherlands, France, Japan, Taiwan, the Czech and Slovak Republics, and the Former Soviet Union. The notably innovative foreign technologies included in this document were screened initially from a list of several hundred, and then evaluated based on criteria that examined for level of maturity, suitability to the DOE needs, and for potential cost effective application at a DOE site. Each of the selected foreign technologies that were evaluated in this effort for DOE application were subsequently matched with site-specific environmental problem units across the DOE complex using the Technology Needs Assessment CROSSWALK Report. For ease of tracking these technologies to site problem units, and to facilitate their input into the DOE EnviroTRADE Information System, they were categorized into the following three areas: (1) characterization, monitoring and sensors, (2) waste treatment and separations, and (3) waste containment. Technical data profiles regarding these technologies include title and description, performance information, development status, key regulatory considerations, intellectual property rights, institute and contact personnel, and references.

Matalucci, R.V. [ed.] [Sandia National Labs., Albuquerque, NM (United States). International Programs Dept.; Jimenez, R.D.; Esparza-Baca, C. [ed.] [Applied Sciences Lab., Inc., Albuquerque, NM (United States)

1995-07-01T23:59:59.000Z

224

Department of Energy Environmental Management Office of Science and Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

Office of Environmental Management Office of Environmental Management International Cooperative Program: Current Status and Plans for Expansion Office of Waste Processing Technical Exchange Denver, CO K. D. Gerdes and A. M. Han Office of Environmental Management U.S. Department of Energy and J. C. Marra*, K. M. Fox*, D. K. Peeler*, M. E. Smith*, G. T. Jannik*, E. B. Farfan*, D. S. Kim**, J. D. Vienna**, J. A. Roach***, A. S. Aloy+, S. V. Stefanovsky++, M. D. Bondarkov+++, D. B. Lopukh‡ and C. W. Kim‡‡ *Savannah River National Laboratory, **Pacific Northwest National Laboratory, ***Idaho National Laboratory, +Khlopin Radium Institute, St. Petersburg, Russia ++SIA Radon Institute, Moscow, Russia, +++International Radioecology Laboratory, Slavutych, Ukraine, ‡Electrotechnical University, St. Petersburg, Russia,

225

The Chemical Technology Division at Argonne National Laboratory: Applying chemical innovation to environmental problems  

DOE Green Energy (OSTI)

The Chemical Technology Division is one of the largest technical divisions at Argonne National Laboratory, a leading center for research and development related to energy and environmental issues. Since its inception in 1948, the Division has pioneered in developing separations processes for the nuclear industry. The current scope of activities includes R&D on methods for disposing of radioactive and hazardous wastes and on energy conversion processes with improved efficiencies, lower costs, and reduced environmental impact. Many of the technologies developed by CMT can be applied to solve manufacturing as well as environmental problems of industry.

NONE

1995-06-01T23:59:59.000Z

226

Geopressured geothermal resource of the Texas and Louisiana Gulf Coast: a technology characterization and environmental assessment  

DOE Green Energy (OSTI)

Two aspects of the Texas and Louisiana Gulf Coast geopressured geothermal resource: (1) the technological requirements for well drilling, completion, and energy conversion, and, (2) the environmental impacts of resource exploitation are examined. The information comes from the literature on geopressured geothermal research and from interviews and discussions with experts. The technology characterization section emphasizes those areas in which uncertainty exists and in which further research and development is needed. The environmental assessment section discusses all anticipated environmental impacts and focuses on the two largest potential problems: (a) subsidence and (b) brine disposal.

Usibelli, A.; Deibler, P.; Sathaye, J.

1980-12-01T23:59:59.000Z

227

Environmental Energy Technologies Division Energy Analysis Department Changes in the Economic Value of  

E-Print Network (OSTI)

Reliability and Office of Energy Efficiency and Renewable Energy #12;2 Environmental Energy Technologies is an evaluation of the economic value of the energy generated · Use a long-run modeling framework to evaluate economic benefits of several different VG technologies: · Wind, single-axis tracking photovoltaics (PV

228

Test and Quality Assurance Plan Environmental and Sustainable Technology Evaluation  

E-Print Network (OSTI)

EPA REVIEW NOTICE This report has been peer and administratively reviewed by the U.S. Environmental Protection Agency, and approved for publication. Mention of trade names or commercial products does not constitute endorsement or recommendation for use. Final Version October 2006 EPA Contract No. EP-C-04-056 Work Assignment No. 1-8-101

Biomass Co-firing; Industrial Boilers

2006-01-01T23:59:59.000Z

229

Environmental Management Technology Leveraging Initiative. Topical report, October 1, 1995--September 30, 1996  

Science Conference Proceedings (OSTI)

The ``Environmental Management Technology Leveraging Initiative,`` a cooperative agreement between the Global Environment and Technology Foundation and the Department of Energy-Morgantown Energy Technology Center, has completed its second year. This program, referred to as the Global Environmental Technology Enterprise (GETE) is an experiment to bring together the public and private sectors to identify, formulate, promote and refine methods to develop more cost-effective clean-up treatments. Working closely with Department of Energy officials, National Laboratory representatives, business people, academia, community groups, and other stakeholders, this program attempts to commercialize innovative, DOE-developed technologies. The methodology to do so incorporates three elements: business assistance, information, and outreach. A key advance this year was the development of a commercialization guidance document which can be used to diagnose the commercialization level and needs for innovative technologies.

NONE

1996-12-31T23:59:59.000Z

230

Assessment of geothermal development in the Imperial Valley of California. Volume 2. Environmental control technology  

DOE Green Energy (OSTI)

Environmental control technologies are essential elements to be included in the overall design of Imperial Valley geothermal power systems. Environmental controls applicable to abatement of hydrogen sulfide emissions, cooling tower drift, noise, liquid and solid wastes, and induced subsidence and seismicity are assessed here. For optimum abatement of H{sub 2}S under a variety of plant operating conditions, removal of H{sub 2}S upstream of the steam turbine is recommended. The environmental impact of cooling tower drift will be closely tied to the quality of cooling water supplies. Conventional noise abatement procedures can be applied and no special research and development are needed. Injection technology constitutes the primary and most essential environmental control and liquid waste disposal technology for Imperial Velley geothermal operations. Subsurface injection of fluids is the primary control for managing induced subsidence. Careful maintenance of injection pressure is expected to control induced seismicity. (MHR)

Morris, W.; Hill, J. (eds.)

1980-07-01T23:59:59.000Z

231

Environmental Assessment for The Ohio State University, Ohio 4-H center with Green Building Technologies  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

The Ohio State University, Ohio 4-H Center The Ohio State University, Ohio 4-H Center with Green Building Technologies DOE/EA 1571 Franklin County, Ohio December 2006 U.S. DEPARTMENT OF ENERGY GOLDEN FIELD OFFICE 1617 Cole Boulevard Golden, Colorado 80401 Ohio State 4-H Center with Green Building Technologies Franklin County, OH TABLE OF CONTENTS Environmental Assessment Ohio 4-H Building with Green Building Technologies Franklin County, Ohio SUMMARY............................................................................................................................. S-1 1.0 INTRODUCTION.........................................................................................................1-1 1.1. National Environmental Policy Act and Related Procedures...........................1-1

232

The Effect of Government Actions on Environmental Technology Innovation: Applications to the Integrated Assessment of Carbon Sequestration Technologies  

SciTech Connect

This project seeks to improve the ability of integrated assessment models (IA) to incorporate changes in technology, especially environmental technologies, cost and performance over time. In this report, we present results of research that examines past experience in controlling other major power plant emissions that might serve as a reasonable guide to future rates of technological progress in carbon capture and sequestration (CCS) systems. In particular, we focus on U.S. and worldwide experience with sulfur dioxide (SO{sub 2}) and nitrogen oxide (NO{sub x}) control technologies over the past 30 years, and derive empirical learning rates for these technologies. The patterns of technology innovation are captured by our analysis of patent activities and trends of cost reduction over time. Overall, we found learning rates of 11% for the capital costs of flue gas desulfurization (FGD) system for SO{sub 2} control, and 13% for selective catalytic reduction (SCR) systems for NO{sub x} control. We explore the key factors responsible for the observed trends, especially the development of regulatory policies for SO{sub 2} and NO{sub x} control, and their implications for environmental control technology innovation.

Rubin, E. S.; Hounshell, D. A.; Yeh, S.; Taylor, M.; Schrattenholzer, L.; Riahi, K.; Barreto, L.; Rao, S.

2004-01-15T23:59:59.000Z

233

ITEP: A survey of innovative environmental restoration technologies in the Netherlands and France  

Science Conference Proceedings (OSTI)

The International Technology Exchange Program (ITEP) of the Department of Energy`s (DOE`s) Office of Environmental Management (EM) is responsible for promoting the import of innovative technologies to better address EM`s needs and the export of US services into foreign markets to enhance US competitiveness. Under this program, potentially innovative environmental restoration technologies, either commercially available or under development in the Netherlands and France, were identified, described, and evaluated. It was found that 12 innovative environmental restoration technologies, which are either commercially available or under development in the Netherlands and France, may have some benefit for the DOE EM program and should be considered for transfer to the United States.

Roberds, W.J.; Voss, C.F.; Hitchcock, S.A. [Golder Associates, Inc., Redmond, WA (United States)

1995-05-01T23:59:59.000Z

234

Environment, health, socioeconomics and environmental control technology. Executive summary  

DOE Green Energy (OSTI)

This report summarizes the important findings of a two-volume report that deals with the potential impacts and environmental controls associated with the operation of geothermal power plants in California's Imperial Valley. The valley contains nearly a third of the nation's total energy potential for identified hot-water resources. Possible impacts of developing those resources include violation of air quality standards if emissions of hydrogen sulfide are not abated, negative ecological effects resulting from increased in the salinity of the Salton Sea, and damage to irrigation systems caused by land subsidence induced by the extraction of geothermal fluids. Other minor impacts concern occupational health and safety, socioeconomics, and hazardous wastes. Analyses of environmental impacts and the control measures for minimizing negative impacts are based primarily on a projected production of 3000 MW of electrical power by the year 2010.

Layton, D.W.

1980-10-01T23:59:59.000Z

235

Diesel prices flat  

U.S. Energy Information Administration (EIA) Indexed Site

Diesel prices flat The U.S. average retail price for on-highway diesel fuel saw no movement from last week. Prices remained flat at 3.89 a gallon on Monday, based on the weekly...

236

Flat panel ferroelectric electron emission display system  

DOE Patents (OSTI)

A device is disclosed which can produce a bright, raster scanned or non-raster scanned image from a flat panel. Unlike many flat panel technologies, this device does not require ambient light or auxiliary illumination for viewing the image. Rather, this device relies on electrons emitted from a ferroelectric emitter impinging on a phosphor. This device takes advantage of a new electron emitter technology which emits electrons with significant kinetic energy and beam current density. 6 figs.

Sampayan, S.E.; Orvis, W.J.; Caporaso, G.J.; Wieskamp, T.F.

1996-04-16T23:59:59.000Z

237

Flat panel ferroelectric electron emission display system  

DOE Patents (OSTI)

A device which can produce a bright, raster scanned or non-raster scanned image from a flat panel. Unlike many flat panel technologies, this device does not require ambient light or auxiliary illumination for viewing the image. Rather, this device relies on electrons emitted from a ferroelectric emitter impinging on a phosphor. This device takes advantage of a new electron emitter technology which emits electrons with significant kinetic energy and beam current density.

Sampayan, Stephen E. (Manteca, CA); Orvis, William J. (Livermore, CA); Caporaso, George J. (Livermore, CA); Wieskamp, Ted F. (Livermore, CA)

1996-01-01T23:59:59.000Z

238

Hydroacoustic Technologies for Environmental Assessment at Hydro Projects  

Science Conference Proceedings (OSTI)

Hydroacoustic technologies can aid the hydroelectric community in detection, assessment, and monitoring of underwater physical and biological objects and provide the information necessary to manage effectively both hydroelectric resources and aquatic resources. The emphasis of this report is remote sensing and measurement of in-water geophysical and biological features using sound, particularly in rivers and as it relates to hydroelectric applications. Understanding the science of hydroacoustics and ...

2013-12-23T23:59:59.000Z

239

Survey of LWR environmental control technology performance and cost  

Science Conference Proceedings (OSTI)

This study attempts to establish a ranking for species that are routinely released to the environment for a projected nuclear power growth scenario. Unlike comparisons made to existing standards, which are subject to frequent revision, the ranking of releases can be used to form a more logical basis for identifying the areas where further development of control technology could be required. This report describes projections of releases for several fuel cycle scenarios, identifies areas where alternative control technologies may be implemented, and discusses the available alternative control technologies. The release factors were used in a computer code system called ENFORM, which calculates the annual release of any species from any part of the LWR nuclear fuel cycle given a projection of installed nuclear generation capacity. This survey of fuel cycle releases was performed for three reprocessing scenarios (stowaway, reprocessing without recycle of Pu and reprocessing with full recycle of U and Pu) for a 100-year period beginning in 1977. The radioactivity releases were ranked on the basis of a relative ranking factor. The relative ranking factor is based on the 100-year summation of the 50-year population dose commitment from an annual release of radioactive effluents. The nonradioactive releases were ranked on the basis of dilution factor. The twenty highest ranking radioactive releases were identified and each of these was analyzed in terms of the basis for calculating the release and a description of the currently employed control method. Alternative control technology is then discussed, along with the available capital and operating cost figures for alternative control methods.

Heeb, C.M.; Aaberg, R.L.; Cole, B.M.; Engel, R.L.; Kennedy, W.E. Jr.; Lewallen, M.A.

1980-03-01T23:59:59.000Z

240

Colorado and the Accelerated Cleanup at Rocky Flats  

SciTech Connect

When the Rocky Flats closure project was declared complete in October 2005, it was the largest environmental cleanup to date. Even more impressive, it was ahead of schedule and well under budget. Several factors combined to produce this success including a performance-based contract with financial incentives, development and application of innovative technologies, and a regulator-backed accelerated approach to the cleanup process. The factor in this success in which the State of Colorado had the largest role was in developing and enforcing the Rocky Flats Cleanup Agreement. In compliance with this agreement, cleanup was accomplished by means of multiple interim actions that led to a comprehensive final decision at the end. A key element that allowed the accelerated cleanup was constant consultation among DOE, its contractor, and the regulators plus collaboration with stakeholders. (authors)

Spreng, C. [Public Health and Environment, Colorado Dept., Denver, CO (United States)

2007-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "flats environmental technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Roadmapping or development of future investments in environmental science and technology  

SciTech Connect

This paper will summarize efforts in roadmapping SCFA technical targets, which could be used for selection of future projects. The timely lessons learned and insights will be valuable to other programs desiring to roadmap large amounts of workscope, but unsure how to successfully complete it, by adequately defining a strategy to develop alternatives and core technologies to ensure needed environmental technologies are available and allow delivery of viable alternatives. In early FY02, Los Alamos National Laboratory's Environmental Science and Waste Technology Program Office was working jointly with Idaho National Environmental Engineering Laboratory to define and develop science and technology mini-roadmaps. We were defining and developing these mini-roadmaps to provide direction and guidance for DOE's Environmental Management's (DOE-EM) Subsurface Contaminants Focus Area (SCFA) in their development of target technologies. DOE EM's Strategic Plan for Science and Technology provides guidance for meeting science and technology needs with a view of the desired future and the long-term strategy to attain it. Program and technology mini-roadmapping were to be used to establish priorities, set program and project direction, and identify the high-priority science and technology need areas according to this document. In the past, EM science and technology needs collection is achieved through the DOE Site Technology Coordination Groups (STCG) across the complex. A future system for needs collection has not been defined. However, there is a need for gap analyses and a technical approach for the prioritization of these needs for DOE-EM to be strategic and successful in their technology research, development, demonstration, and deployments. To define the R&D projects needed to solve particular problems and select the project with the largest potential payoff will require analysis for project selection. Mini-roadmaps could be used for setting goals and priorities for future program planning and development of future investments in environmental science and technology, which would reduce risk by delivering additional data and technologies with possible incremental improvement to baselines.

Wilburn, D. (Dianne)

2002-01-01T23:59:59.000Z

242

Surface coal mining technology: engineering and environmental aspects  

SciTech Connect

This survey of recommended methods, techniques and alternatives for selecting and designing surface coal mining systems is based on a review and evaluation of methods reported in the literature and applied in the field. The book is based on research conducted or sponsored by The Pennsylvania State University, the US Bureau of Mines, the US EPA, and the Polish Central Research and Design Institute for Openpit Mining. While the high price of petroleum has resulted in conservation efforts, total energy demand will still increase substantially in the years ahead. This increase will try out abilities to discover, extract and beneficiate fuels in the necessary volumes. Coal will eventually replace large amounts of petroleum fuels. A summary of the analyses required to lay out a surface mine, taking into consideration the limitations imposed by geology, equipment, reclamation, economics, and environmental control requirements, is provided.

Fung, R. (ed.)

1981-01-01T23:59:59.000Z

243

U.S. Environmental Protection Agency ETV Joint Verification Statement TECHNOLOGY TYPE: Continuous Emission Monitor  

E-Print Network (OSTI)

Program to facilitate the deployment of innovative or improved environmental technologies through performance verification and dissemination of information. The goal of the ETV Program is to further environmental protection by substantially accelerating the acceptance and use of improved and cost-effective technologies. ETV seeks to achieve this goal by providing high-quality, peer-reviewed data on technology performance to those involved in the design, distribution, financing, permitting, purchase, and use of environmental technologies. ETV works in partnership with recognized standards and testing organizations; with stakeholder groups that consist of buyers, vendor organizations, and permitters; and with the full participation of individual technology developers. The program evaluates the performance of innovative technologies by developing test plans that are responsive to the needs of stakeholders, conducting field or laboratory tests (as appropriate), collecting and analyzing data, and preparing peer-reviewed reports. All evaluations are conducted in accordance with rigorous quality assurance protocols to ensure that data of known and adequate quality are generated and that the results are defensible. The Advanced Monitoring Systems (AMS) Center, one of six technology centers under ETV, is operated by Battelle in cooperation with EPAs National Exposure Research Laboratory. The AMS Center has recently evaluated the performance of continuous emission monitors used to measure mercury in flue gases. This

unknown authors

2001-01-01T23:59:59.000Z

244

U.S. Environmental Protection Agency ETV Joint Verification Statement TECHNOLOGY TYPE: Continuous Emission Monitor  

E-Print Network (OSTI)

Program to facilitate the deployment of innovative or improved environmental technologies through performance verification and dissemination of information. The goal of the ETV Program is to further environmental protection by substantially accelerating the acceptance and use of improved and cost-effective technologies. ETV seeks to achieve this goal by providing high-quality, peer-reviewed data on technology performance to those involved in the design, distribution, financing, permitting, purchase, and use of environmental technologies. ETV works in partnership with recognized standards and testing organizations; with stakeholder groups that consist of buyers, vendor organizations, and permitters; and with the full participation of individual technology developers. The program evaluates the performance of innovative technologies by developing test plans that are responsive to the needs of stakeholders, conducting field or laboratory tests (as appropriate), collecting and analyzing data, and preparing peer-reviewed reports. All evaluations are conducted in accordance with rigorous quality assurance protocols to ensure that data of known and adequate quality are generated and that the results are defensible. The Advanced Monitoring Systems (AMS) Center, one of six technology centers under ETV, is operated by Battelle in cooperation with EPAs National Exposure Research Laboratory. The AMS Center has recently evaluated the performance of continuous emission monitors used to measure mercury in flue gases. This verification

unknown authors

2001-01-01T23:59:59.000Z

245

Environmental and institutional considerations in the development and implementation of biomass energy technologies  

DOE Green Energy (OSTI)

The photosynthetic energy stored in plant and organic waste materials in the United States amounts to approximately 40% of the nation's total energy consumption. Conversion of this energy to usable power sources is a complex process, involving many possible materials, conversion technologies, and energy products. Near-term biomass technologies are predominantly based on traditional fuel use and have the advantage over other solar technologies of fitting into existing tax and business practices. However, no other solar technology has the potential for such large environmental impacts. Unlike the conversion of sun, wind, and ocean thermal energy, the conversion of the biomass energy source, in the form of biomass residues and wastes, can create problems. Environmental impacts may be significant, and legal responses to these impacts are a key determinant to the widespread adoption of biomass technologies. This paper focuses on the major legal areas which will impact on biomass energy conversion. These include (1) the effect of existing state and federal legislation, (2) the role of regulatory agencies in the development of biomass energy, (3) governmental incentives to biomass development, and (4) legal issues surrounding the functioning of the technologies themselves. Emphasis is placed on the near-term technologies whose environmental impacts and institutional limitations are more readily identified. If biomass energy is to begin to achieve its apparently great potential, these questions must receive immediate attention.

Schwab, C.

1979-09-01T23:59:59.000Z

246

Environmental technology and policy development in a regional system : transboundary water management and pollution prevention in southeastern Europe  

E-Print Network (OSTI)

In order to surmount the barriers to transboundary integration and coordination of environmental technology and regulatory policy in Southeastern Europe, the environmental capabilities and needs of the region are discussed, ...

Electris, Christi

2007-01-01T23:59:59.000Z

247

Advanced Technology Section semiannual progress report, April 1-September 30, 1977. Volume 1. Biotechnology and environmental programs. [Lead Abstract  

DOE Green Energy (OSTI)

Research efforts in six areas are reported. They include: centrifugal analyzer development; advanced analytical systems; environmental research; bioengineering research;bioprocess development and demonstration; and, environmental control technology. Individual abstracts were prepared for each section for ERA/EDB. (JCB)

Pitt, W.W. Jr.; Mrochek, J.E. (comps.)

1980-06-01T23:59:59.000Z

248

Whiskey Flats Geothermal Area | Open Energy Information  

Open Energy Info (EERE)

Whiskey Flats Geothermal Area Whiskey Flats Geothermal Area Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Geothermal Resource Area: Whiskey Flats Geothermal Area Contents 1 Area Overview 2 History and Infrastructure 3 Regulatory and Environmental Issues 4 Exploration History 5 Well Field Description 6 Geology of the Area 7 Geofluid Geochemistry 8 NEPA-Related Analyses (1) 9 Exploration Activities (0) 10 References Map: Whiskey Flats Geothermal Area Whiskey Flats Geothermal Area Location Map Area Overview Geothermal Area Profile Location: Nevada Exploration Region: Walker-Lane Transition Zone Geothermal Region GEA Development Phase: none"None" is not in the list of possible values (Phase I - Resource Procurement and Identification, Phase II - Resource Exploration and Confirmation, Phase III - Permitting and Initial Development, Phase IV - Resource Production and Power Plant Construction) for this property.

249

The Energy and Environmental Technology Applications Center (E2TAC) | Open  

Open Energy Info (EERE)

Technology Applications Center (E2TAC) Technology Applications Center (E2TAC) Jump to: navigation, search Logo: The Energy and Environmental Technology Applications Center (E2TAC) Name The Energy and Environmental Technology Applications Center (E2TAC) Address 255 Fuller Road Place Albany, New York Zip 12203 Coordinates 42.690969°, -73.833092° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.690969,"lon":-73.833092,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

250

UNITED STATES DEPARTMENT OF ENERGY OFFICE OF ENVIRONMENTAL MANAGEMENT WASTE PROCESSING ANNUAL TECHNOLOGY DEVELOPMENT REPORT 2008  

SciTech Connect

The Office of Waste Processing identifies and reduces engineering and technical risks and uncertainties of the waste processing programs and projects of the Department of Energy's Environmental Management (EM) mission through the timely development of solutions to technical issues. The risks, and actions taken to mitigate those risks, are determined through technology readiness assessments, program reviews, technology information exchanges, external technical reviews, technical assistance, and targeted technology development and deployment. The Office of Waste Processing works with other DOE Headquarters offices and project and field organizations to proactively evaluate technical needs, identify multi-site solutions, and improve the technology and engineering associated with project and contract management. Participants in this program are empowered with the authority, resources, and training to implement their defined priorities, roles, and responsibilities. The Office of Waste Processing Multi-Year Program Plan (MYPP) supports the goals and objectives of the U.S. Department of Energy (DOE) - Office of Environmental Management Engineering and Technology Roadmap by providing direction for technology enhancement, development, and demonstration that will lead to a reduction of technical risks and uncertainties in EM waste processing activities. The MYPP summarizes the program areas and the scope of activities within each program area proposed for the next five years to improve safety and reduce costs and environmental impacts associated with waste processing; authorized budget levels will impact how much of the scope of activities can be executed, on a year-to-year basis. Waste Processing Program activities within the Roadmap and the MYPP are described in these seven program areas: (1) Improved Waste Storage Technology; (2) Reliable and Efficient Waste Retrieval Technologies; (3) Enhanced Tank Closure Processes; (4) Next-Generation Pretreatment Solutions; (5) Enhanced Stabilization Technologies; (6) Spent Nuclear Fuel; and (7) Challenging Materials. This report provides updates on 35 technology development tasks conducted during calendar year 2008 in the Roadmap and MYPP program areas.

Bush, S.

2009-11-05T23:59:59.000Z

251

The National Energy Technology Laboratory Annual Site Environmental Report for Calendar Year 2002  

SciTech Connect

This Site Environmental Report was prepared by the Environmental, Safety, and Health Division at the National Energy Technology Laboratory (NETL) for the U.S. Department of Energy. The purpose of this report is to inform the public and Department of Energy stakeholders of the environmental conditions at NETL sites in Morgantown (MGN), West Virginia, Pittsburgh (PGH), Pennsylvania, Tulsa, Oklahoma, and Fairbanks, Alaska. This report contains the most accurate information that could be collected during the period between January 1, 2002, and December 31, 2002. As stated in DOE Orders 450.1 and 231.1, the purpose of the report is to: (1) Characterize site environmental management performance. (2) Confirm compliance with environmental standards and requirements. (3) Highlight significant facility programs and efforts.

National Energy Technology Laboratory

2003-10-30T23:59:59.000Z

252

The Office of Industrial Technologies - enhancing the competitiveness, efficiency, and environmental quality of American industry through technology partnerships  

Science Conference Proceedings (OSTI)

A critical component of the Federal Government`s effort to stimulate improved industrial energy efficiency is the DOE`s Office of Industrial Technologies (OIT). OIT funds research, development, and demonstration (RD&D) efforts and transfers the resulting technology and knowledge to industry. This document describes OIT`s program, including the new Industries of the Future (IOF) initiative and the strategic activities that are part of the IOF process. It also describes the energy, economic, and environmental characteristics of the materials and process industries that consume nearly 80% of all energy used by manufacturing in the United States. OIT-supported RD&D activities relating to these industries are described, and quantitative estimates of the potential benefits of many OIT-supported technologies for industry are also provided.

NONE

1997-09-01T23:59:59.000Z

253

Environmental planning in Florida: Floridas environmental screening tool: laying the technology foundation for efficient transportation decision making  

E-Print Network (OSTI)

of Transportation. Environmental Management Office, Interimof Transportation, Environmental Management Office, with

Roaza, Ruth

2003-01-01T23:59:59.000Z

254

Energy utilization and environmental control technologies in the coal-electric cycle  

SciTech Connect

This report presents an overview and assessment of the currently commercial and possible future technologies in the United States that are a part of the coal-electric cycle. From coal production to residual emissions control at the power plant stack, this report includes a brief history, current status and future assessment of each technology. It also includes a discussion, helpful for policy making decisions, of the process operation, environmental emission characteristics, market constraints and detailed cost estimates for each of these technologies, with primary emphasis on coal preparation, coal-electric generation and emissions control systems.

Ferrell, G.C.

1977-10-01T23:59:59.000Z

255

Technology partnerships: Enhancing the competitiveness, efficiency, and environmental quality of American industry. Executive summary  

SciTech Connect

This document briefly describes the Department of Energy`s (DOE`s) Office of Industrial Technologies (OIT) program. It profiles the energy, economic, and environmental characteristics of OIT`s principal customers--the materials and process industries--that consume nearly 80% of all energy used by industry in the US. OIT-supported research, development, and demonstration (RD and D) activities relating to these industries are described as well as OIT`s crosscutting technology programs that target the needs of multiple US industries. Quantitative estimates of the potential benefits (or metrics) to US industry of many current OIT-supported technologies are also discussed.

NONE

1995-04-01T23:59:59.000Z

256

Environmental Energy Technologies Division Energy Analysis Department Tracking the Sun III  

E-Print Network (OSTI)

's Solar Energy Technologies Program and the Clean Energy States Alliance for supporting this work #12) · Data were cleaned to only include system costs of $2-30/W, systems where total incentives were , and only systems with installed cost, size, and incentive level reported #12;Environmental Energy

257

Health and environmental effects of oil shale technology. A workshop summary and panel reports  

DOE Green Energy (OSTI)

This report is the result of a workshop which addressed the health and environmental effects of oil shale technology. The purpose of this workshop were: to assemble biomedical and environmental scientists, representative of a broad range of disciplines, to address current developments in oil shale technology; to review and identify specific health and environmental issues and problems associated with the development and commercialization of oil shale technology; and to consider the research strategies required to address them and to identify the requisite research information needs, expressed via detailed task statements, for resolving the uncertainties of assessing the relevant impacts of oil shale technology. Throughout the workshop, attendees participated in six panels: health effects; air quality; water quantity, quality, and aquatic ecology; terrestrial effects; ambient measuring and monitoring; and source characterization. This report contains a presentation of the highlights of the issues considered by the panels and the panel reports which contain specific information on environmental and health effects, information requirements, and detailed research statements.

Brown, R. (ed.)

1979-05-01T23:59:59.000Z

258

Environmental Energy Technologies Division Energy Analysis Department Managing Natural Gas Price  

E-Print Network (OSTI)

-fired generation contracts 2) Reduces Natural Gas Prices: Increased RE reduces natural gas demand, and consequently Quantity Q0 P0 P1 Q1 Original Demand ShiftedDemandq Theory: Increased use of RE will reduce natural gasEnvironmental Energy Technologies Division · Energy Analysis Department Managing Natural Gas Price

259

DOE's Former Rocky Flats Weapons Production Site to Become National  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Former Rocky Flats Weapons Production Site to Become National Former Rocky Flats Weapons Production Site to Become National Wildlife Refuge DOE's Former Rocky Flats Weapons Production Site to Become National Wildlife Refuge July 12, 2007 - 2:54pm Addthis WASHINGTON, DC - The U.S. Department of Energy (DOE) today announced the transfer of nearly 4,000 acres of its former Rocky Flats nuclear weapons production site to the Department of the Interior's (DOI) U.S. Fish and Wildlife Service (FWS) for use as a National Wildlife Refuge. After more than a decade of environmental cleanup work, the transfer creates the Rocky Flats National Wildlife Refuge, 16 miles northwest of Denver, Colorado, and marks completion of the regulatory milestones to transform a formerly contaminated site into an environmental asset. "The Department of Energy's environmental cleanup of the Rocky Flats

260

UTILIZING INNOVATIVE TECHNOLOGIES FOR ENVIRONMENTAL CLEAN-UP, SAVAHHAH RIVER SITE  

SciTech Connect

The Savannah River Site (SRS) is a 310-square-mile United States Department of Energy nuclear facility located along the Savannah River near Aiken, South Carolina. During operations, which started in 1951, hazardous substances (chemicals and radionuclides) were released to the environment. The releases occurred as a result of inadvertent spills and waste disposal in unlined pits and basins which was common practice before environmental regulations existed. The hazardous substances have migrated to the vadose zone and groundwater in many areas of the SRS, resulting in 515 waste units and facilities that are required by environmental regulations, to undergo characterization and, if needed, remediation. In the initial years of the SRS environmental cleanup program (early 1990s), the focus was to use common technologies (such as pump and treat, air stripping, excavation and removal) that actively and tangibly removed contamination. Exclusive use of these technologies required continued and significant funding while often failing to meet acceptable clean-up goals and objectives. Recognizing that a more cost-effective approach was needed, SRS implemented new and complementary remediation methods focused on active and passive technologies targeted to solve specific remediation problems. Today, SRS uses technologies such as chemical/pH-adjusting injection, phytoremediation, underground cutoff walls, dynamic underground stripping, soil fracturing, microbial degradation, baroballs, electrical resistance heating, soil vapor extraction, and microblowers to more effectively treat contamination at lower costs. Additionally, SRS's remediation approach cost effectively maximizes cleanup as SRS works proactively with multiple regulatory agencies. Using GIS, video, animation, and graphics, SRS is able to provide an accurate depiction of the evolution of SRS groundwater and vadose zone cleanup activities to convince stakeholders and regulators of the effectiveness of various cleanup technologies. Remediating large, complex groundwater plumes using state-of-the-art technologies and approaches is a hallmark of years of experience and progress. Environmental restoration at SRS continues to be a challenging and dynamic process as new cleanup technologies and approaches are adopted. technologies and approaches is a hallmark of years of experience and progress. Environmental restoration at SRS continues to be a challenging and dynamic process as new cleanup technologies and approaches are adopted.

Bergren, C

2009-01-07T23:59:59.000Z

Note: This page contains sample records for the topic "flats environmental technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Systems Approach and Quantitative Decision Tools for Technology Selection in Environmentally Friendly Drilling  

E-Print Network (OSTI)

One of the petroleum industry?s goals is to reduce the environmental impact of oil and gas operations in environmentally sensitive areas. To achieve this, a number of Environmentally Friendly Drilling (EFD) technologies have been developed to varying degrees. For example, the use of an elevated platform as an alternative to the gravel pad is less intrusive and leads to a more environmentally friendly approach to drilling operations. Elevated drilling platforms will require the use of piles. Another alternative to the gravel pad is the use of composite mats. Since the demand of low impact technologies for drill site construction has rapidly increased, the parametric study for the feasibility of using pile foundations and composite mats is conducted in this research. Even though a number of EFD technologies have already been developed to varying degrees, few have been integrated into a field demonstrable drilling system (i.e., combination of technologies) compatible with ecologically sensitive areas. In general, it is difficult to select the best combination of EFD technologies for a given site because there are many possible combinations and many different evaluation criteria. The proposed technology evaluation method is based on a systems analysis that can be used for integrating current and new EFD technologies into an optimal EFD system. An optimization scheme is suggested based on a combination of multi-attribute utility theory and exhaustively enumerating all possible technology combinations to provide a quantitative rationale and suggest the best set of systems according to a set of criteria, with the relative importance of the different criteria defined by the decision-maker. In this research, the sensitivity of the optimal solution to the weight factors and the effects of the uncertainty of input scores are also discussed using a case study. An application of the proposed approach is described by conducting a case study in Green Lake at McFaddin, TX. The main purpose of this case study is to test the proposed technology evaluation protocol in a real site and then to refine the protocol. This research describes the results of the case study which provided a more logical and comprehensive approach that maximized the economic and environmental goals of both the landowner and the oil company leaseholder.

Yu, Ok Y.

2009-05-01T23:59:59.000Z

262

The Historically Black Colleges and Universities/Minority Institutions Environmental Technology Consortium annual report, 1992--1993  

SciTech Connect

The HBCU/MI Consortium was formed (1) to respond to national R and D, policy formulation and minority manpower needs in environmental technology, hazardous, solid and mixed waste materials management, environmental restoration, and environmental health; and (2) to address limited minority participation in the public, private and non-profit environmental industries; limited environmental awareness among minorities; minimal interaction between HBCUs/MIs and majority universities, industry and interest groups; limited institutional development in environmental education and research; and lack of minority technical businesses in the environmental industry. This report gives progress made for the 92--93 period.

1993-12-31T23:59:59.000Z

263

Review of the environmental effects and benefits of selected solar energy technologies  

DOE Green Energy (OSTI)

Data are reviewed and summarized on the environmental effects of three solar energy technologies: photovoltaic cells, wind energy conversion (WEC), and the solar thermal central receiver. Potential effects are identified for each of the life cycle phases: resource extraction and component manufacture, plant construction, operation and decommission. The solar energy technologies are assumed to be deployed as centralized energy production facilities. The technologies examined are materials intensive compared to fossil fuel plants with the same power rating. As a result, the life-cycle phase of resource extraction and component production is the most environmentally hazardous. Impacts of plant construction will be somewhat site specific but should approximate impacts associated with any large construction activity. The operation phase is relatively environmentally benign. WEC operation does produce low-level noise pollution and presents minimal hazards to flying species. Solar thermal facilities equipped with wet cooling towers may affect local air quality via cooling tower drift. In addition, large installations of each option may alter local microclimate. Decommission of WEC, solar thermal, and Si-photovoltaic facilities should present no environmental hazards, although disposal of CdS or GaAs cells will require care.

Lawrence, K. A.

1979-05-01T23:59:59.000Z

264

Tools for Closure Project and Contract Management: Development of the Rocky Flats Integrated Closure Project Baseline  

Science Conference Proceedings (OSTI)

This paper details the development of the Rocky Flats Integrated Closure Project Baseline - an innovative project management effort undertaken to ensure proactive management of the Rocky Flats Closure Contract in support of the Department's goal for achieving the safe closure of the Rocky Flats Environmental Technology Site (RFETS) in December 2006. The accelerated closure of RFETS is one of the most prominent projects within the Department of Energy (DOE) Environmental Management program. As the first major former weapons plant to be remediated and closed, it is a first-of-kind effort requiring the resolution of multiple complex technical and institutional challenges. Most significantly, the closure of RFETS is dependent upon the shipment of all special nuclear material and wastes to other DOE sites. The Department is actively working to strengthen project management across programs, and there is increasing external interest in this progress. The development of the Rocky Flats Integrated Closure Project Baseline represents a groundbreaking and cooperative effort to formalize the management of such a complex project across multiple sites and organizations. It is original in both scope and process, however it provides a useful precedent for the other ongoing project management efforts within the Environmental Management program.

Gelles, C. M.; Sheppard, F. R.

2002-02-26T23:59:59.000Z

265

Understanding differences in the diffusion of environmentally beneficial technology. Final project report  

SciTech Connect

The factors affecting the diffusion of technical discoveries among firms and nations remain one of the most interesting and important but least understood elements of economic behavior. Recently, interest in technology diffusion has been heightened by a recognition that the spread of technologies could have important implications for environmental quality as well as for market goods and services. A specific motivation for this study was the question of how rapidly technologies that reduce greenhouse gas emissions might diffuse. Technologies in this category include technologies that improve the efficiency of fossil energy use or promote substitution of renewable energy resources. The speed with which these technologies spread could have a significant effect on the rate of accumulation of carbon in the atmosphere. From a modeling perspective, the rate of innovation and diffusion of carbon-reducing technology is known to be a crucial parameter in integrated assessments of climate change risks and policy responses. Thus, a better understanding of factors that might influence the spread of carbon-reducing technologies could be valuable in studies on long-term global change and policy assessment.

Blackman, A.; Boyd, J.; Simpson, R.D.; Toman, M.

1996-12-31T23:59:59.000Z

266

Immobilization of Rocky Flats Graphite Fines Residues  

SciTech Connect

The Savannah River Technology Center (SRTC) is developing an immobilization process for graphite fines residues generated during nuclear materials production activities at the Rocky Flats Environmental Technology Site (Rocky Flats). The continued storage of this material has been identified as an item of concern. The residue was generated during the cleaning of graphite casting molds and potentially contains reactive plutonium metal. The average residue composition is 73 wt percent graphite, 15 wt percent calcium fluoride (CaF2), and 12 wt percent plutonium oxide (PuO2). Approximately 950 kilograms of this material are currently stored at Rocky Flats. The strategy of the immobilization process is to microencapsulate the residue by mixing with a sodium borosilicate (NBS) glass frit and heating at nominally 700 degrees C. The resulting waste form would be sent to the Waste Isolation Pilot Plant (WIPP) for disposal. Since the PuO2 concentration in the residue averages 12 wt percent, the immobilization process was required to meet the intent of safeguards termination criteria by limiting plutonium recoverability based on a test developed by Rocky Flats. The test required a plutonium recovery of less than 4 g/kg of waste form when a sample was leached using a nitric acid/CaF2 dissolution flowsheet. Immobilization experiments were performed using simulated graphite fines with cerium oxide (CeO2) as a surrogate for PuO2 and with actual graphite fines residues. Small-scale surrogate experiments demonstrated that a 4:1 frit to residue ratio was adequate to prevent recovery of greater than 4 g/kg of cerium from simulated waste forms. Additional experiments investigated the impact of varying concentrations of CaF2 and the temperature/heating time cycle on the cerium recovery. Optimal processing conditions developed during these experiments were subsequently demonstrated at full-scale with surrogate materials and on a smaller scale using actual graphite fines.In general, the recovery of cerium from the full-scale waste forms was higher than for smaller scale experiments. The presence of CaF2 also caused a dramatic increase in cerium recovery not seen in the small-scale experiments. However, the results from experiments with actual graphite fines were encouraging. A 4:1 frit to residue ratio, a temperature of 700 degrees C, and a 2 hr heating time produced waste forms with plutonium recoveries of 4 plus/minus 1 g/kg. With an increase in the frit to residue ratio, waste forms fabricated at this scale should meet the Rocky Flats product specification. The scale-up of the waste form fabrication process to nominally 3 kg is expected to require a 5:1 to 6:1 frit to residue ratio and maintaining the waste form centerline temperature at 700 degrees C for 2 hr.

Rudisill, T. S.

1998-11-06T23:59:59.000Z

267

REVEGETATION OF THE ROCKY FLATS SITE, COLORADO  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

REVEGETATION OF THE ROCKY FLATS SITE, COLORADO REVEGETATION OF THE ROCKY FLATS SITE, COLORADO Jody K. Nelson Professional Environmental Group/S.M. Stoller Corporation Rocky Flats Site 11025 Dover Street, Suite 1000 Westminster, CO 80021 ABSTRACT At the U.S. Department of Energy's (DOE's) Rocky Flats Site (Site), a former nuclear weapons component manufacturing plant near Golden, Colorado, approximately 650 acres were revegetated as part of the cleanup and closure activities. Numerous issues and challenges were addressed during the revegetation activities at the Site. These included deciding on revegetation and restoration goals; addressing poor substrate issues and soil compaction problems; use of soil amendments and topsoil; seed selection issues; timing and location of revegetation projects

268

Establishment of an Environmental Control Technology Laboratory with a Circulating Fluidized-Bed Combustion System  

NLE Websites -- All DOE Office Websites (Extended Search)

EstablishmEnt EstablishmEnt of an EnvironmEntal Control tEChnology laboratory with a CirCulating fluidizEd-bEd Combustion systEm Description In response to President Bush's Clear Skies Initiative in 2002-a legislative proposal to control the emissions of nitrogen oxides (NO x ), sulfur dioxide (SO 2 ), and mercury (Hg) from power plants-the National Energy Technology Laboratory (NETL) organized a Combustion Technology University Alliance and hosted a Solid Fuel Combustion Technology Alliance Workshop. The workshop identified four high- priority research needs for controlling emissions from fossil-fueled power plants: multipollutant control, improved sorbents and catalysts, mercury monitoring and capture, and an improved understanding of the underlying combustion chemistry.

269

EIS-0277: Final Environmental Impact Statement | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Final Environmental Impact Statement Final Environmental Impact Statement EIS-0277: Final Environmental Impact Statement Management of Certain Plutonium Residues and Scrub Alloy Stored at the Rocky Flats Environmental Technology Site This EIS evaluates the potential alternatives and impacts associated with a proposal to process certain plutonium residues and all of the scrub alloy currently stored at Rocky Flats. While ongoing stabilization activities at Rocky Flats are addressing immediate health and safety concerns associated with existing storage conditions, the indefinite storage of these materials, even after stabilization, would continue to present health and safety concerns that could only be eliminated by disposal or other disposition of the materials. Thus, this EIS evaluates alternative processing technologies to prepare these

270

The Convergence of Environmental Issues„From Ecosystem Impacts to Technology Solutions  

NLE Websites -- All DOE Office Websites (Extended Search)

Convergence of Environmental Issues-From Convergence of Environmental Issues-From Ecosystem Impacts to Technology Solutions James Ekmann, Sarah Forbes, RJ James, Melissa Chan, and Peter Balash 1 Introduction Complex systems, including banking systems and electricity transmission and distribution, require careful long-term planning in order to prevent potential breakdowns. Any failure to operate as expected can have significant effect on the economy, environment, society, or a combination of all of three. These breakdowns may be because of an unforeseen inability to deal with new needs, or incompatibility with new technology. One notable recent breakdown in complex systems is the electricity blackout in the northeast U.S. during the summer of 2003. Another, much anticipated, near

271

Environmental control technology activities of the Department of Energy in FY 1978  

DOE Green Energy (OSTI)

This second in a series of annual reports on environmental control technology activities within DOE serves as a basis for evaluating program progress. The total DOE FY 1978 funding allocation related to environmenta control activities was $294 million, which corresponds to 3.3% of the total FY 1978 budget. Funding allocations for environmental control activities in the budget show fossil and nuclear energy technologies accounting for 90% of the total (26 and 64%, respectively). The majority of the fossil-energy-related activities were related to the coal program. Waste management activities demanded the majority of the nuclear energy funds. Conservation and geothermal made up 4 and 3%, respectively, of the total. The remaining portion of the total consisted of solar (2%), basic energy sciences (1%), and magnetic fusion energy (less than 1%). (MCW)

Not Available

1979-03-01T23:59:59.000Z

272

Establishment of an Environmental Control Technology Laboratory with a Circulating Fluidized-Bed Combustion System  

DOE Green Energy (OSTI)

This report is to present the progress made on the project ''Establishment of an Environmental Control Technology Laboratory (ECTL) with a Circulating Fluidized-Bed Combustion (CFBC) System'' during the period January 1, 2006 through March 31, 2006. Work was performed on the following activities. First, the fabrication and manufacture of the CFBC Facility were completed. The riser, primary cyclone and secondary cyclone of Circulating Fluidized Bed (CFB) Combustor have been erected. Second, the Mercury Control Workshop and the Grand Opening of Institute for Combustion Science and Environmental Technology (ICSET) were successfully held on February 22 and 23, 2006, respectively. Third, effects of hydrogen chlorine (HCl) and sulfur dioxide (SO{sub 2}) on mercury oxidation were studied in a drop tube reactor. The experimental results from this study are presented in this report. Finally, the proposed work for the next quarter is described in this report.

Wei-Ping Pan; Yan Cao; Songgeng Li

2006-04-01T23:59:59.000Z

273

DEPLOYMENT OF THE GUBKA TECHNOLOGY TO STABILIZE RADIOACTIVE STANDARD SOLUTIONS AT THE FERNALD ENVIRONMENTAL MANAGEMENT PROJECT  

Science Conference Proceedings (OSTI)

This paper describes the deployment of the Gubka technology to stabilize liquid technical standards at the Fernald Environmental Management Project. Gubka, an open-cell glass crystalline porous material, was developed by a joint research program of Russian Institutes at St. Petersburg, Krasnoyarsk, and Zheleznogorsk and the Idaho National Engineering and Environmental Laboratory. Gubka technology can be applied in an active or a passive method to stabilize a solution. In both methods the result is the same, and the dried components of the solution are sorbed in the pores of the Gubka block while the liquid phase is evaporated. In this deployment Gubka blocks were passively floated in the solutions at ambient conditions. As the solutions evaporated, the non-volatile components were sorbed in the pores of the Gubka blocks. The waste-loaded Gubka blocks have been packaged for transportation and disposal at the Nevada Test site within an existing waste category.

Chipman, N.A.; Knecht, D.A.; Meyer, A.; Aloy, A.; Anshits, A.G.; Tretyakov, A.A.

2003-02-27T23:59:59.000Z

274

Technology Transfer: Available Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Materials Biofuels Biofuels Biotechnology and Medecine Biotechnology & Medicine Chemistry Developing World Energy Efficient Technologies Energy Environmental Technologies...

275

Technologies development for environmental restoration and waste management: International university and research institution and industry partnerships  

SciTech Connect

The Institute for Central and Eastern European Cooperative Environmental Research (ICEECER) at Florida State University was formed in 1990 soon after the end of the Cold War. ICEECER consists of a number of joint centers which link FSU, and US as well as international funding agencies, to academic and research institutions in Hungary, Poland, the Czech Republic, Russia, and the other countries of Central and Eastern Europe and the Newly Independent States. Areas of interest include risk assessment, toxicology, contaminated site remediation/characterization, waste management, emergency response, environmental technology development/demonstration/transfer, and some specialized areas of research (e.g., advanced chemical separations). Through ICEECER, numerous international conferences, symposia, training courses, and workshops have also been conducted on a variety of environmental topics. This paper summarizes the mission, structure, and administration of ICEECER and provides information on the projects conducted through this program at FSU.

Herndon, R.C.; Moerlins, J.E.; Kuperberg, J.M.

1996-12-31T23:59:59.000Z

276

Rocky flats teams forming  

SciTech Connect

Bidding teams are shaping up to go after the $3.5-billion, five-year contract to manage ongoing operations and cleanup of the US Dept. of Energy`s Rocky Flats nuclear weapon plant near Denver.

NONE

1994-08-01T23:59:59.000Z

277

Diesel prices flat nationally  

U.S. Energy Information Administration (EIA) Indexed Site

Diesel prices flat nationally The U.S. average retail price for on-highway diesel fuel remained the same from a week ago at 3.98 a gallon on Monday, based on the weekly price...

278

Flat plate solar oven  

Science Conference Proceedings (OSTI)

The construction of an Indian Rs. 186 (US $20.33) flat-plate solar oven is described. Detailed drawings are provided and relevant information on cooking times and temperature for different foods is given.

Parikh, M.

1981-01-01T23:59:59.000Z

279

Review of Beryllium Management Practices at Rocky Flats During Closure Operations  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE-Environmental Management DOE - Complex Wide Review of Beryllium Management Practices at Rocky Flats During Closure Operations Challenge Beryllium (Be) metal is used by DOE in weapons production, as a reactor moderator or reflector, and as a fuel element cladding. Workers who are exposed to high concentrations of beryllium often develop acute beryllium disease caused by the inhalation of beryllium dust or particles which can cause Be sensitivity or chronic Be disease (CBD), a disabling and often fatal lung disease. A review of Rocky Flats Environmental Technology Site (RFETS) Be practices put in place by Kaiser-Hill, the cleanup contractor, was initiated to determine the effectiveness of RFETS beryllium characterization and prevention programs and to determine what, if any, suggestions could be

280

Final Site-Wide Environmental Assessment of National Renewable Energy Laboratory's National Wind Technology Center  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

May 31, 2002 May 31, 2002 DOE/EA 1378 FINDING OF NO SIGNIFICAflJT IMPACT For the NATIONAL WIND TECHNOLOGY CENTER Site Operations and Short-Term and Long-Term Improvement Programs Golden, Colorado AGENCY: Department of Energy, Golden Field Office ACTION: Finding of No Significant Impact SUMMARY: The Department of Energy (DOE) conducted a Site-Wide Environmental Assessment (EA) of the National Wind Technology Center (NWTC) to evaluate potential impacts of site operations and short-term and long-term improvement programs. DOE's Office of Energy Efficiency and Renewable Energy (EERE) leads the national research effort to develop clean, competitive, and reliable renewable energy and power delivery technologies for the 21st century. The mission of EERE's Wind Energy Program is to help the

Note: This page contains sample records for the topic "flats environmental technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Environmental impacts of lighting technologies - Life cycle assessment and sensitivity analysis  

SciTech Connect

With two regulations, 244/2009 and 245/2009, the European Commission recently put into practice the EuP Directive in the area of lighting devices, aiming to improve energy efficiency in the domestic lighting sector. This article presents a comprehensive life cycle assessment comparison of four different lighting technologies: the tungsten lamp, the halogen lamp, the conventional fluorescent lamp and the compact fluorescent lamp. Taking advantage of the most up-to-date life cycle inventory database available (ecoinvent data version 2.01), all life cycle phases were assessed and the sensitivity of the results for varying assumptions analysed: different qualities of compact fluorescent lamps (production phase), different electricity mixes (use phase), and end-of-life scenarios for WEEE recycling versus municipal solid waste incineration (disposal phase). A functional unit of 'one hour of lighting' was defined and the environmental burdens for the whole life cycle for all four lamp types were calculated, showing a clearly lower impact for the two gas-discharge lamps, i.e. the fluorescent and the compact fluorescent lamp. Differences in the product quality of the compact fluorescent lamps reveal to have only a very small effect on the overall environmental performance of this lamp type; a decline of the actual life time of this lamp type doesn't result in a change of the rank order of the results of the here examined four lamp types. It was also shown that the environmental break-even point of the gas-discharge lamps is reached long before the end of their expected life-span. All in all, it can be concluded that a change from today's tungsten lamp technology to a low-energy-consuming technology such as the compact fluorescent lamp results in a substantial environmental benefit.

Welz, Tobias; Hischier, Roland, E-mail: Roland.Hischier@empa.ch; Hilty, Lorenz M.

2011-04-15T23:59:59.000Z

282

FINAL REPORT FORMER RADIATION WORKER MEDICAL SURVEILLANCE PROGRAM AT ROCKY FLATS For Department of Energy Programs  

SciTech Connect

The Former Radiation Worker Medical Surveillance Program at Rocky Flats was conducted in Arvada, CO, by Oak Ridge Associated Universities through the Oak Ridge Institute for Science and Education under DOE Contract DE-AC05-00OR22750. Objectives of the program were to obtain information on the value of medical surveillance among at-risk former radiation workers and to provide long-term internal radiation dosimetry information to the scientific community. This program provided the former radiation workers of the Rocky Flats Environmental Technology Site (formerly Rocky Flats Plant) an opportunity to receive follow-up medical monitoring and a re-evaluation of their internal radiation dose. The former Rocky Flats radiation worker population is distinctive because it was a reasonably stable work force that received occupational exposures, at times substantial, over several decades. This report reflects the summation of health outcomes, statistical analyses, and dose assessment information on former Rocky Flats radiation workers to the date of study termination as of March 2004.

Joe M. Aldrich

2004-11-01T23:59:59.000Z

283

Establishment of an Environmental Control Technology Laboratory with a Circulating Fluidized-Bed Combustion System  

DOE Green Energy (OSTI)

On February 14, 2002, President Bush announced the Clear Skies Initiative, a legislative proposal to control the emissions of nitrogen oxides (NO{sub x}), sulfur dioxide (SO{sub 2}), and mercury from power plants. In response to this initiative, the National Energy Technology Laboratory organized a Combustion Technology University Alliance and hosted a Solid Fuel Combustion Technology Alliance Workshop. The workshop identified multi-pollutant control; improved sorbents and catalysts; mercury monitoring and capture; and improved understanding of the underlying reaction chemistry occurring during combustion as the most pressing research needs related to controlling environmental emissions from fossil-fueled power plants. The Environmental Control Technology Laboratory will help meet these challenges and offer solutions for problems associated with emissions from fossil-fueled power plants. The goal of this project was to develop the capability and technology database needed to support municipal, regional, and national electric power generating facilities to improve the efficiency of operation and solve operational and environmental problems. In order to effectively provide the scientific data and the methodologies required to address these issues, the project included the following aspects: (1) Establishing an Environmental Control Technology Laboratory using a laboratory-scale, simulated fluidized-bed combustion (FBC) system; (2) Designing, constructing, and operating a bench-scale (0.6 MW{sub th}), circulating fluidized-bed combustion (CFBC) system as the main component of the Environmental Control Technology Laboratory; (3) Developing a combustion technology for co-firing municipal solid waste (MSW), agricultural waste, and refuse-derived fuel (RDF) with high sulfur coals; (4) Developing a control strategy for gaseous emissions, including NO{sub x}, SO{sub 2}, organic compounds, and heavy metals; and (5) Developing new mercury capturing sorbents and new particulate filtration technologies. Major tasks during this period of the funded project's timeframe included: (1) Conducting pretests on a laboratory-scale simulated FBC system; (2) Completing detailed design of the bench-scale CFBC system; (3) Contracting potential bidders to fabricate of the component parts of CFBC system; (4) Assembling CFBC parts and integrating system; (5) Resolving problems identified during pretests; (6) Testing with available Powder River Basin (PRB) coal and co-firing of PRB coal with first wood pallet and then chicken wastes; and (7) Tuning of CFBC load. Following construction system and start-up of this 0.6 MW CFBC system, a variety of combustion tests using a wide range of fuels (high-sulfur coals, low-rank coals, MSW, agricultural waste, and RDF) under varying conditions were performed to analyze and monitor air pollutant emissions. Data for atmospheric pollutants and the methodologies required to reduce pollutant emissions were provided. Integration with a selective catalytic reduction (SCR) slipstream unit did mimic the effect of flue gas composition, including trace metals, on the performance of the SCR catalyst to be investigated. In addition, the following activities were also conducted: (1) Developed advanced mercury oxidant and adsorption additives; (2) Performed laboratory-scale tests on oxygen-fuel combustion and chemical looping combustion; and (3) Conducted statistical analysis of mercury emissions in a full-scale CFBC system.

Wei-Ping Pan; Yan Cao; John Smith

2008-05-31T23:59:59.000Z

284

DOE/EA-1622: Final Environmental Assessment for University of Nevada, Las Vegas Research Foundation Solar Technology Center (January 2009)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

University of Nevada, Las Vegas University of Nevada, Las Vegas Research Foundation SOLAR TECHNOLOGY CENTER January 2009 Final Environmental Assessment and Finding of No Significant Impact DOE/EA-1622 U.S. Department of Energy Golden Field Office National Renewable Energy Laboratory 1617 Cole Boulevard Golden, Colorado 80401 This Environmental Assessment was prepared on behalf of the U.S. Department of Energy by the University of Nevada, Las Vegas Research Foundation with contractual assistance from Ninyo & Moore, Inc. and MBP Consulting, LLC. Finding of No Significant Impact Solar Technology Center January 2009 Finding of No Significant Impact Solar Technology Center January 2009 Finding of No Significant Impact Solar Technology Center

285

The National Energy Technology Laboratory Annual Site Environmental Report for Calendar Year 2001  

Science Conference Proceedings (OSTI)

No significant environmental problems were identified at the National Energy Technology Laboratory (NETL) sites in Morgantown (MGN), Pittsburgh (PGH), Tulsa (NPTO) and Fairbanks (AEO) during 2001. No radionuclides were released from the sites during 2001. The sites maintain two major environmental programs: waste management, and environmental media and release management. These two programs encompass waste handling, storage, and disposal, waste minimization and pollution prevention, air quality emissions, surface-water discharges, groundwater impacts, industrial wastewater discharges, and spill control procedures. The Morgantown and Pittsburgh sites currently maintain complete monitoring programs for groundwater, stormwater discharge, laboratory wastewater discharge, and meteorological data. In addition, an annual air emissions inventory is prepared. A comprehensive Directives Program aimed at managing environmental, safety, health requirements, and risks was initiated in 1997, continued through subsequent years, and will be completed in 2003. The primary objective of the program is to identify and implement standards that will protect the health and safety of workers, public, and the environment. This program started with a careful and thorough analysis of risks confronting workers and the communities surrounding NETL sites. Following this analysis, requirements and best management practices were evaluated to determine how requirements could best be used to advance the mission of NETL. Teams of subject-matter experts analyzed the work assigned to determine potential hazards and identify ways to remove or control those hazards. In 2001, NETL developed or revised a series of directives in two major areas: safety analysis and review (SAR) processes, and integrated safety management (ISM) directives. SAR directives were issued for research and development (R&D) operations, support operations, and facilities. ISM directives were released on management processes, such as standards maintenance, performance measures, assessments, corrective actions, lessons-learned, and training. In conjunction with the Directives Program, the use of the voluntary environmental management system, ISO 14001, was evaluated. This includes the only international environmental management standard to which an entity can be certified. NETL is using the specifications and guidance from this standard to identify an effective environmental management system for the NETL sites. An outside consultant performed an environmental management system assessment (also referred to as an initial environmental review), as referenced in ISO 14004. The objective of the assessment was to determine the degree to which NETL's existing integrated safety management system (ISMS), safety analysis review system (SARS), and environmental management programs conformed with the ISO14001 Environmental Management System (EMS) standard and the United States Environmental Protection Agency's (EPA) Code of Environmental Management Principles. A performance measurement system continued to be maintained during 2001 to assist in evaluating how effectively activities at NETL meet mission-critical goals and how well missions and strategies are connected in the DOE strategic plan. This system also provides data to assist in gauging performance against the DOE critical success factors, that is, performance against technical objectives. Various environmental milestones can be tracked to completion, thus giving NETL measures by which to gauge the sites' goals of remaining in regulatory compliance and achieving best-in-class environmental performance.

National Energy Technology Laboratory

2002-10-01T23:59:59.000Z

286

The National Energy Technology Laboratory Annual Site Environmental Report for Calendar Year 2002  

NLE Websites -- All DOE Office Websites (Extended Search)

Environmental Report Environmental Report For Calendar Year 2002 U . S . D e p a r t m e n t o f E n e r g y * O f f i c e o f F o s s i l E n e r g y N a t i o n a l E n e r g y T e c h n o l o g y L a b o r a t o r y DOE/NETL-2004/1201 2 DOE/NETL-2004/1201 The National Energy Technology Laboratory Annual Site Environmental Report for Calendar Year 2002 October 2003 U.S. Department of Energy National Energy Technology Laboratory Morgantown, West Virginia Pittsburgh, Pennsylvania Tulsa, Oklahoma Fairbanks, Alaska NETL Customer Service Line: (800) 553-7681 NETL Homepage: www.netl.doe.gov 3 Disclaimer This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or

287

Combustion Engineering Integrated Coal Gasification Combined Cycle Repowering Project, Clean Coal Technology Program. Environmental Assessment  

Science Conference Proceedings (OSTI)

The DOE entered into a cooperative agreement with Combustion Engineering, Inc. (C-E) under which DOE proposes to provide cost-shared funding to design, construct, and operate an Integrated Coal Gasification Combined Cycle (IGCC) project to repower an existing steam turbine generator set at the Springfield (Illinois) City Water, Light and Power (CWL&P) Lakeside Generating Station, while capturing 90% of the coal`s sulfur and producing elemental sulfur as a salable by-product. The proposed demonstration would help determine the technical and economic feasibility of the proposed IGCC technology on a scale that would allow the utility industry to assess its applicability for repowering other coal-burning power plants. This Environmental Assessment (EA) has been prepared by DOE in compliance with the requirements of National Environmental Policy Act (NEPA). The sources of information for this EA include the following: C-E`s technical proposal for the project submitted to DOE in response to the Innovative Clean Coal Technology (ICCT) Program Opportunity Notice (PON); discussions with C-E and CWL&P staff; the volume of environmental information for the project and its supplements provided by C-E; and a site visit to the proposed project site.

Not Available

1992-03-01T23:59:59.000Z

288

Environmental restoration/waste management-applied technology semiannual report, January--June 1992. Volume 1, No. 1  

SciTech Connect

This is the first issue from the Lawrence Livermore National Laboratory of The Environmental Restoration/Waste Management-Applied Technology (ER/WM-AT) Semiannual Report, a continuation of the Advanced Processing Technology (APT) Semiannual Report. The name change reflects the consolidation of the APT Program with the Environmental Restoration and Waste Management Program to form the Environmental Restoration/Waste Management-Applied Technology (ER/WM-AT) Program. The Livermore site mirrors, on a small scale, many of the environmental and waste management problems of the DOE Complex. The six articles in this issue cover incineration- alternative technologies, process development for waste minimization, the proposed Mixed Waste Management Facility, dynamic underground stripping, electrical resistance tomography, and Raman spectroscopy for remote characterization of underground tanks.

Adamson, M.; Kline-Simon, K. [eds.

1992-12-31T23:59:59.000Z

289

Greening the invisible hand : how environmental non-governmental organizations (NGOs) succeed and fall in technology change  

E-Print Network (OSTI)

This dissertation examines how national environmental non-governmental organizations (NGOs) in Sweden and the United States (US) tried to diffuse cleaner production technologies in the pulp and paper industry from 1980-1998. ...

Rossi, Mark S. (Mark Stephen), 1962-

2003-01-01T23:59:59.000Z

290

Identification of environmental control technologies for geothermal development in the Imperial Valley of California  

DOE Green Energy (OSTI)

Control technologies to manage environmental impacts from geothermal developments in California's Imperial Valley from development to 1985 are discussed. Included are descriptions of methods for managing land subsidence by fluid injection; for preventing undesirable induced seismicity or mitigating the effects of seismic events; for managing liquid wastes through pretreatment or subsurface injection; for controlling H/sub 2/S by dispersal, reinjection, and chemical treatment of effluents; and for minimizing the impact of noise from power plants by setting up buffer zones and exclusion areas.

Snoeberger, D.F.; Hill, J.H.

1978-10-05T23:59:59.000Z

291

AUTHORS: Annika Todd, Peter Cappers, Charles Goldman Environmental Energy Technologies Division  

NLE Websites -- All DOE Office Websites (Extended Search)

AUTHORS: AUTHORS: Annika Todd, Peter Cappers, Charles Goldman Environmental Energy Technologies Division Lawrence Berkeley National Laboratory June 2013 LBNL-6247E Residential Customer Enrollment in Time-based Rate and Enabling Technology Programs iii Acknowledgments The work described in this report was supported by the U.S. Department of Energy's Office of Electricity Delivery and Energy Reliability (DOE OE) under Lawrence Berkeley National Laboratory Contract No. DE-AC02-05CH11231. The authors would like to thank Joe Paladino (DOE OE) for his support. The authors would also like to thank the members of the LBNL Technical Advisory Group who contributed their wisdom and guidance: Peter Cappers, Annika Todd, Charles Goldman and Andy Satchwell (LBNL); Catherine Wolfram, Meredith Fowlie, and Lucas Davis (University of

292

Electric Power Research Institute Environmental Control Technology Center Report to the Steering Committee  

Science Conference Proceedings (OSTI)

Operations and maintenance continued this month at the Electric Power Research Institute's (EPRI?s) Environmental Control Technology Center (ECTC). Testing for the month involved the Dry Sorbent Injection (DSI) test block with the Carbon Injection System. Also, several installation activities were initiated this month for the testing of a new EPRI/ADA Technologies sorbent sampling system in December. The 1.0 MW Cold-Side Selective Catalytic Reduction (SCR) unit, the 0.4 MW Mini Pilot Wet Scrubber, and the 4.0 MW Pilot Wet Scrubber remained idle this month in a cold-standby mode and were inspected regularly. These units remain available for testing as future work is identified.

None

1997-11-01T23:59:59.000Z

293

The Department of Energy`s Rocky Flats Plant: A guide to record series useful for health related research. Volume 4: Production and materials handling  

Science Conference Proceedings (OSTI)

This is the fourth in a series of seven volumes which constitute a guide to records of the Rocky Flats Plant useful for conducting health-related research. The primary purpose of Volume 4 is to describe record series pertaining to production and materials handling activities at the Department of Energy`s (DOE) Rocky Flats Plant, now named the Rocky Flats Environmental Technology Site, near Denver, Colorado. History Associates Incorporated (HAI) prepared this guide as part of its work as the support services contractor for DOE`s Epidemiologic Records Inventory Project. This introduction briefly describes the Epidemiologic Records Inventory Project and HAI`s role in the project, provides a history of production and materials handling practices at Rocky Flats, and identifies organizations contributing to production and materials handling policies and activities. Other topics include the scope and arrangement of the guide and the organization to contact for access to these records.

NONE

1995-08-01T23:59:59.000Z

294

Phosphors for flat panel emissive displays  

Science Conference Proceedings (OSTI)

An overview of emissive display technologies is presented. Display types briefly described include: cathode ray tubes (CRTs), field emission displays (FEDs), electroluminescent displays (ELDs), and plasma display panels (PDPs). The critical role of phosphors in further development of the latter three flat panel emissive display technologies is outlined. The need for stable, efficient red, green, and blue phosphors for RGB fall color displays is emphasized.

Anderson, M.T.; Walko, R.J.; Phillips, M.L.F.

1995-07-01T23:59:59.000Z

295

Is flat fair?  

Science Conference Proceedings (OSTI)

Dynamic pricing holds out the promise of shifting peak demand as well as reducing overall demand. But it also raises thorny issues of fairness. All practical pricing systems involve tradeoffs between equity and efficiency. I examine the circumstances under which equity ought to be allowed to trump efficiency and whether or not this constitutes a defense of flat pricing. (author)

Bunzl, Martin

2010-07-15T23:59:59.000Z

296

Microsoft Word - RockyFlatsPropLR111406.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

November 15, 2006 November 15, 2006 REPLY TO ATTN OF: IG-40 SUBJECT: Letter Report on "Alleged Waste of Funds Involving Excess Property at Rocky Flats" (INS-L-07-03) TO: Assistant Secretary for Environmental Management This is to advise you of the results of an Office of Inspector General inspection of alleged waste of funds involving excess property at the Department of Energy's (DOE's) Rocky Flats site. BACKGROUND Nuclear weapons production operations at Rocky Flats were discontinued in 1992. Subsequently, responsibility for Rocky Flats was reassigned from the Department's Office of Defense Programs to the Office of Environmental Management. In January 2000, DOE entered into a contract with Kaiser-Hill Company, LLC, for the closure of Rocky Flats by

297

Enforcement Letter -Rocky Flats-08/02/2000  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

, 2000 , 2000 Mr. Robert G. Card [ ] Kaiser-Hill Company, L.L.C. Rocky Flats Environmental Technology Site 10808 Highway 93, Unit B Golden, CO 80403-8200 Subject: Enforcement Letter Dear Mr. Card: This letter refers to the Department of Energy's (DOE) evaluation of potential noncompliances with the requirements of 10 CFR 830.120 (Quality Assurance Rule). The potential noncompliances involved inadequate implementation of work controls, specifically failure to perform required combustible gas surveillances. The failure to fully perform the required surveillances was identified by the contractor during a comprehensive Kaiser-Hill (KHLL) Implementation Validation Review (IVR) team verifying implementation of the Basis of Interim Operation (BIO) for Buildings 776 and

298

Enforcement Letter - Rocky Flats -07/20/1998  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

, 1998 , 1998 Mr. Robert G. Card [ ] Kaiser-Hill Company, L.L.C. Rocky Flats Environmental Technology Site P.O. Box 464 Golden, CO 80402-0464 Subject: Enforcement Letter Noncompliance Reports NTS-RFO--KHLL-SITEWIDE-1997-0006 NTS-RFO--KHLL-371OPS-1997-0002 NTS-RFO--KHLL-SITEWIDE-1997-0010 NTS-RFO--KHLL-SITEWIDE-1998-0001 Dear Mr. Card: This letter refers to the Department of Energy=s (DOE) evaluation of noncompliances reported in four Noncompliance Tracking System (NTS) entries, identified in the subject line above. The four NTS reports were submitted between September 24, 1997, and March 3, 1998. The reports identified potential noncompliances with requirements of 10 CFR 830.120 (Quality Assurance Rule) and 10 CFR 835 (Radiation Protection Rule). The Office of Enforcement and Investigation evaluated these NTS reports based on the

299

Learning curves for environmental technology and their importance for climate policy analysis  

E-Print Network (OSTI)

DG. Dynamics of energy technologies and global change.CO. Experience curves for energy technology policy. Paris,o f technologies, including energy technologies [3-7]. Cost

Rubin, Edward S.; Taylor, Margaret R; Yeh, Sonia; Hounshell, David A.

2007-01-01T23:59:59.000Z

300

Environmental and Economical Evaluation of Integrating NGL Extraction and LNG Liquefaction Technology in Iran LNG Project  

E-Print Network (OSTI)

The combination of changing global markets for natural gas liquids (NGL) with the simultaneous increase in global demand for liquefied natural gas (LNG) has stimulated an interest in the integration of NGL recovery technology with LNG liquefaction technologies. Historically, the removal of heavy or high-freezing-point hydrocarbons from the feed to LNG plants has been characterized as gas conditioning and achieved using one or more distillation columns. While some attempts to provide reflux to the distillation columns marginally enhanced NGL recovery, little emphasis was placed on maximizing NGL recovery as a product from the LNG process. As such, the integration of the two processes was not a priority. Integrating state-of-the art NGL recovery technology within the CoP LNGSM Process1, formerly the Phillips Optimized Cascade LNG Process, results in a significant reduction in the specific power required to produce LNG, while maximizing NGL recovery. This corresponds to a production increase in both LNG and NGL for comparable compression schemes as compared to stand-alone LNG liquefaction and NGL extraction facilities. In addition, there are potential enhancements to the overall facility availability and project economics and environmental impacts using the integrated concept. This integrated concept has been applied to three ongoing international NGL/LNG projects using the CoP LNG Process in Iran LNG project. In this respect, simulation has been performed in THERMOFLEX software. Moreover, thermo economic analysis has been applied for economic and thermodynamic analysis of base and integrated cases through computer code has been provided here. Finally, the base and integrated case have been evaluated and comprised in view of thermodynamics, economics and environmental impacts.

Manesh, M. H. K.; Mazhari, V.

2009-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "flats environmental technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Economic analysis of a candidate 50 cents/Wpk flat-plate photovoltaic manufacturing technology. Low-Cost Solar Array Project 5101-94  

SciTech Connect

The SAMICS methodology was used to analyze the first candidate manufacturing sequence that could meet the LSA Projects's 1986 price goal. That goal represents a reduction in photovoltaic prices by a factor of a hundred over a 10-year period, from approximately 50 $/Wpk in 1975 to 50 cents/Wpk in 1986. The results of analysis which has occurred since the original presentation of the 5 cents/Wpk candidate factory at the 10th LSA Project Integration Meeting are described. Briefly, if a number of events occur, such as a high cell efficiency (14% for this technology), vertical industry integration, long periods of amortizing the initial capital investment, and full utilization of a large plant, then a price of 39.9 cents/Wpk is possible. Non-optimal circumstances will increase this required price, and several of these circumstances are addressed.

Aster, R.W.

1978-12-01T23:59:59.000Z

302

Flat plate heat exchangers  

SciTech Connect

A lightweight flat plate heat exchanger comprised of two or more essentially parallel flat plates which are formed and arranged to provide fluid flow passages between the plates. New combinations of plastic plates include the usage of transparent plastic foam and honeycomb structures. Improved shapes of flow passages include the usage of flow nozzles, flow diffusers, and jet pumps to increase fluid flow and heat transfer. The invention includes the usage of transparent plastic foam plates which are shaped to concentrate solar energy onto plastic tubes. Clear plastic tubes containing black heat transfer fluid are included. The invention includes the usage of spiral flow channels within plastic foam plates. Six different embodiments of the invention are included. Five of the embodiments could be used as efficient lightweight solar collectors.

Berringer, R.T.

1981-09-29T23:59:59.000Z

303

Radiological/Health physics program assessement at Rocky Flats, the process  

SciTech Connect

The Department of Energy, Rocky Flats Office, Safety and Health Group, Health Physics Team (HPT) is responsible for oversight of the Radiation Protection and Health Physics Program (RPHP) of the Integrating Management Contractor (IMC), Kaiser-Hill (K-H) operations at the Rocky Flats Environmental Technology Site (RFETS). As of 1 January 1996 the Rocky Flats Plant employed 300 DOE and 4,300 contractor personnel (K-H and their subcontractors). WSI is a subcontractor and provides plant security. To accomplish the RPHP program oversight HPT personnel developed a systematic methodology for performing a functional RPHP Assessment. The initial process included development of a flow diagram identifying all programmatic elements and assessment criteria documents. Formulation of plans for conducting interviews and performance of assessments constituted the second major effort. The generation of assessment reports was the final step, based on the results of this process. This assessment will be a 6 person-year effort, over the next three years. This process is the most comprehensive assessment of any Radiation Protection and Health Physics (RPHP) Program ever performed at Rocky Flats. The results of these efforts will establish a baseline for future RPHP Program assessments at RFETS. This methodology has been well-received by contractor personnel and creates no Privacy Act violations or other misunderstandings.

Psomas, P.O. [Department of Energy, Golden, CO (United States)

1996-06-01T23:59:59.000Z

304

Establishment of an Environmental Control Technology Laboratory with a Circulating Fluidized-Bed Combustion System  

SciTech Connect

This report is to present the progress made on the project ''Establishment of an Environmental Control Technology Laboratory (ECTL) with a Circulating Fluidized-Bed Combustion (CFBC) System'' during the period October 1, 2005 through December 31, 2005. Work was performed on the following activities. First, the fabrication and manufacture of the CFBC Facility is nearly completed. The erection of the CFBC facility is expected to start in the second week of February, 2006. Second, effect of flue gas components on mercury oxidation was investigated in a drop tube reactor. As a first step, experiment for mercury oxidation by chlorine was investigated. The experimental results from this study are presented in this report. Finally, the proposed work for the next quarter is described in this report.

Wei-Ping Pan; Songgeng Li

2006-01-01T23:59:59.000Z

305

ESTABLISHMENT OF AN ENVIRONMENTAL CONTROL TECHNOLOGY LABORATORY WITH A CIRCULATING FLUIDIZED-BED COMBUSTION SYSTEM  

Science Conference Proceedings (OSTI)

This report is to present the progress made on the project ''Establishment of an Environmental Control Technology Laboratory (ECTL) with a Circulating Fluidized-Bed Combustion (CFBC) System'' during the period July 1, 2004 through September 30, 2004. The following tasks have been completed. First, renovation of the new Combustion Laboratory and the construction of the Circulating Fluidized-Bed (CFB) Combustor Building have started. Second, the design if the component parts of the CFBC system have been reviewed and finalized so that the drawings may be released to the manufacturers during the next quarter. Third, the experiments for solid waste (chicken litter) incineration have been conducted using a Thermogravimetric Analyzer (TGA). This is in preparation for testing in the simulated fluidized-bed combustor. The experimental results from this study are presented in this report. Finally, the proposed work for the next quarter has been outlined in this report.

Wei-Ping Pan; Andy Wu; John T. Riley

2004-10-30T23:59:59.000Z

306

Electric Power Research Institute, Environmental Control Technology Center report to the Steering Committee. Final technical report  

Science Conference Proceedings (OSTI)

Operations and maintenance continued this month at the Electric Power Research Institute`s Environmental Control Technology Center. Testing on the 4.0 MW Pilot Wet FGD unit continued this month with the Trace Element Removal (TER) test block, and a simultaneous testing of the Lime Forced Oxidation process with DBA addition (LDG). At the end of the month, a series of Duct Injection tests began in a study to determine the efficiencies of alkaline injection for removing trace elements (mercury). On the Cold-Side Selective Catalytic Reduction (SCR) unit, low temperature performance testing continued this month as measurements were taken for NO{sub x} removal efficiency, residual ammonia slip, and SO{sub 3} generation across the catalysts installed in the SCR reactor. This report describes the status of the facilities and test activities at the pilot and mini-pilot plants.

NONE

1995-07-01T23:59:59.000Z

307

OVERVIEW OF IMPACTS OF TECHNOLOGY DEPLOYMENT ON THE MISSION OF THE DEPARTMENT OF ENERGY OFFICE OF ENVIRONMENTAL MANAGEMENT  

Science Conference Proceedings (OSTI)

The Environmental Management (EM) mission is to complete the safe cleanup of the environmental legacy brought about from five decades of nuclear weapons development and government-sponsored nuclear energy research. The EM program has embraced a mission completion philosophy based on reducing risk and environmental liability over a 40-50 year lifecycle. The Department has made great progress toward safely disposing of its legacy nuclear waste. EM Research and Development (R&D) program management strategies have driven numerous technology and engineering innovations to reduce risk, minimize cleanup costs, and reduce schedules. Engineering and technology investments have provided the engineering foundation, technical assistance, approaches, and technologies that have contributed to moving the cleanup effort forward. These successes include start-up and operation of several waste treatment facilities and processes at the sites.

McCabe, D.; Chamberlain, G.; Looney, B.; Gladden, J.

2010-11-30T23:59:59.000Z

308

Wabash River Coal Gasification Combined Cycle Repowering Project: Clean Coal Technology Program. Environmental Assessment  

Science Conference Proceedings (OSTI)

The proposed project would result in a combined-cycle power plant with lower emissions and higher efficiency than most existing coal-fired power plants of comparable size. The net plant heat rate (energy content of the fuel input per useable electrical generation output; i.e., Btu/kilowatt hour) for the new repowered unit would be a 21% improvement over the existing unit, while reducing SO{sub 2} emissions by greater than 90% and limiting NO{sub x} emissions by greater than 85% over that produced by conventional coal-fired boilers. The technology, which relies on gasified coal, is capable of producing as much as 25% more electricity from a given amount of coal than today`s conventional coal-burning methods. Besides having the positive environmental benefit of producing less pollutants per unit of power generated, the higher overall efficiency of the proposed CGCC project encourages greater utilization to meet base load requirements in order to realize the associated economic benefits. This greater utilization (i.e., increased capacity factor) of a cleaner operating plant has global environmental benefits in that it is likely that such power would replace power currently being produced by less efficient plants emitting a greater volume of pollutants per unit of power generated.

Not Available

1993-05-01T23:59:59.000Z

309

HYDROGEN DATA FROM LOS ALAMOS [LANL] & SAVANNAH RIVER [SRC] & ROCKY FLATS [RFE] [SEC 1 & 2  

DOE Green Energy (OSTI)

A DOE letter dated August 14, 2001 requested that a detailed analysis of the expected probability of accumulation of significant quantities of hydrogen gas in unvented drums and a plan and schedule for venting drums be prepared and submitted. In response to the letter a document was prepared that included data of hydrogen concentrations in TRU waste drums. Data was collected from Savannah River Site, Los Alamos National Laboratory, and Rocky Flats Environmental Technology Site. These data were analyzed to provide the basis for evaluating the probability that significant quantities of hydrogen will accumulate in the unvented TRU drums stored at Hanford.

DAYLEY, L.

2001-11-19T23:59:59.000Z

310

DOE/EA-1146 ENVIRONMENTAL ASSESSMENTy FINDING OF NO SIGNIFICANT  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6 6 ENVIRONMENTAL ASSESSMENTy FINDING OF NO SIGNIFICANT I-MPACT, AND RESPONSE TO COMMENTS RADI-OACTIVE WASTE STORAGE United States Department o f Energy Rocky Flats Environmental Technology Site Golden, Colorado April 1996 DOE/EA-1146 ENVIRONMENTAL ASSESSMENT, FINDING OF NO SIGNIFICANT IMPACT, AND RESPONSE TO COMMENTS RADIOACTIVE WASTE STORAGE United States Department of Energy Rocky Flats Environmental Technology Site Golden, Colo rad0 DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsi- bility for the accuracy, completeness, or usefulness of any information, apparatus, product, or

311

Using Environmental Solutions to Lubrication at Hydropower Plants: A Hydropower Technology Round-Up Report, Volume 1  

Science Conference Proceedings (OSTI)

Hydropower owners and operators are confronted with the dual challenge of compliance with continually-developing environmental regulations and increasingly vigorous competition in the electric generation market. Managing this challenge requires consideration and selected application of new and emerging strategies and technologies. This volume of EPRI's Hydropower Technology Roundup Report presents an overview of research, practices, lessons learned, and some examples regarding the use of self-lubricating...

1999-10-28T23:59:59.000Z

312

The Historically Black Colleges and Universities/Minority Institutions Environmental Technology Consortium annual report, 1991--1992  

SciTech Connect

The member institutions of the Consortium continue to play a significant role in increasing the number of African Americans who enter the environmental professions through the implementation of the Consortium`s RETT Plan for Research, Education, and Technology Transfer. The four major program areas identified in the RETT Plan are as follows: (1) minority outreach and precollege education; (2) undergraduate education and postsecondary training; (3) graduate and postgraduate education and research; and (4) technology transfer.

NONE

1992-12-31T23:59:59.000Z

313

Energy technology characterizations handbook: environmental pollution and control factors. Third edition  

SciTech Connect

This Handbook deals with environmental characterization information for a range of energy-supply systems and provides supplementary information on environmental controls applicable to a select group of environmentally characterized energy systems. Environmental residuals, physical-resource requirements, and discussion of applicable standards are the principal information provided. The quantitative and qualitative data provided are useful for evaluating alternative policy and technical strategies and for assessing the environmental impact of facility siting, energy production, and environmental controls.

Not Available

1983-03-01T23:59:59.000Z

314

Program on Technology Innovation: Environmental and Health Issues Related to Radiofrequency Emissions from Smart Grid Technologies, Summary of Two Workshops  

Science Conference Proceedings (OSTI)

The electrical grid with its associated technologies is experiencing a phase of rapid evolution and expansion. New technological innovations often evoke questions and concerns about health and safety. To address this contingency, EPRI held two workshops in 2011 to (1) identify the electromagnetic environments resulting from emerging technologies, and (2) obtain an understanding of the potential health effects associated with radio-frequency (RF) emissions these technologies produce.

2011-12-30T23:59:59.000Z

315

Status Update: Closing Rocky Flats by 2006  

SciTech Connect

Safely closing Rocky Flats by December 2006 is a goal shared by many: the State of Colorado, the communities surrounding the site, the U.S. Congress, the Department of Energy (DOE), Kaiser-Hill and its team of subcontractors, the site's employees and taxpayers across the country. This paper will: provide a status of the Closure Project to date; describe important accomplishments of the past year; describe some of the closure-enhancing technologies enabling acceleration; and discuss the remaining challenges ahead.

Tuor, N.; Schubert, A.

2003-02-25T23:59:59.000Z

316

Record of Decision on Management of Certain Plutonium Residues and Scrub Alloy Stored at the Rocky Flats Environmental Technology Site (12/01/98)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

136 136 Federal Register / Vol. 63, No. 230 / Tuesday, December 1, 1998 / Notices teachers who participate in setting the achievement levels. The focus of the study is to assess the correspondence between the teachers' estimates of the performance of their students on this assessment and the empirical performance of the student on the assessment. The teachers who will be asked to participate in this study are familiar with the content of the assessment framework and with the pool of items developed for the 1998 assessment. They also are familiar with the meaning of the achievement levels describing what students should know and be able to do and the abilities of the students who will be assessed. Teachers will not know how their individual students performed on the assessment.

317

Rocky Flats Closure: the Role of Models in Facilitating Scientific Communication With Stakeholder Groups  

SciTech Connect

The Rocky Flats Environmental Technology Site (RFETS) was a U.S. Department of Energy (DOE) environmental cleanup site for a previous manufacturing plant that made components for the U.S. nuclear weapons arsenal. The facility was shut down in 1989 to address environmental and safety concerns, and left behind a legacy of contaminated facilities, soils, surface and ground water. In 1995, the Site contractor established the Actinide Migration Evaluation (AME) advisory group to provide advice and technical expertise on issues of actinide behavior and mobility in the air, surface water, groundwater, and soil. Through a combination of expert judgment supported by state-of-the-art scientific measurements, it was shown that under environmental conditions at Rocky Flats, plutonium and americium form insoluble oxides that adhere to small soil, organic, and mineral particles and colloids, or are colloidal materials themselves. A series of models ranging from conceptual, geostatistical, and large-scale wind and surface water erosion models were used to guide stakeholder interactions. The nature of these models, and their use in public communication is described.

Clark, D.L.; Choppin, G.R.; Dayton, C.S.; Janecky, D.R.; Lane, L.J.; Paton, I.

2009-05-28T23:59:59.000Z

318

Environmental Assessment for the Oak Ridge Science and Technology Project at the Oak Ridge National Laboratory, Oak Ridge, Tennessee  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

81(E)/020508 81(E)/020508 DOE/EA-1575 Environmental Assessment for the Oak Ridge Science and Technology Project at the Oak Ridge National Laboratory, Oak Ridge, Tennessee February 2008 U. S. Department of Energy Oak Ridge Office 06-281(E)/020508 iii CONTENTS FIGURES.....................................................................................................................................................iv TABLES ......................................................................................................................................................iv ACRONYMS................................................................................................................................................ v 1. INTRODUCTION

319

Abstract--Environmentally friendly technologies such as photovoltaics and fuel cells are DC sources. In the current power  

E-Print Network (OSTI)

Abstract--Environmentally friendly technologies such as photovoltaics and fuel cells are DC sources, fuel cells and photovoltaics, produce direct current (DC). Currently, power system infrastructures that wish to incorporate fuel cells and photovoltaics must first convert the DC power produced

Tolbert, Leon M.

320

Available Technologies: Atomically Flat Crystal Surfaces  

Devices once fabricated at micron-level precision are now fabricated at nano-level precision. With the trend continuing towards miniaturization, ...

Note: This page contains sample records for the topic "flats environmental technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Recent Developments in Flat Rolling Technologies  

Science Conference Proceedings (OSTI)

Symposium, J. Materials and Processes for Enhanced Performance ... Separation and Recovery Process of Rare Metals from Oil Desulfurization Spent Catalyst.

322

Finding of No Significant Impact Environmental Assessment for The Ohio State University, Ohio 4-H center with Green Building Technologies  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Golden Golden Field Office 1617 Cole Boulevard Golden, Colorado 80401-3393 December 27, 2006 DOE/EA 1571 FINDING OF NO SIGNIFICANT IMPACT ENVIRONMENTAL ASSESSMENT For The Ohio State University, Ohio 4-H Center with Green Building Technologies AGENCY: Department of Energy, Golden Field Office ACTION: Finding of No Significant Impact SUMMARY: The US Department of Energy (DOE) conducted an Environmental Assessment (EA) that analyzed the potential environmental impacts associated with the construction and operation of the Ohio State University (OSU) 4-H Center with Green Building Technologies in Franklin County, Ohio. Based on action by the U.S. Congress, DOE has funding available to support the construction phase of two features within the Ohio 4-H Center designed for energy efficiency: 1) A hybrid geothermal/cooling tower heating, ventilating, and cooling (HVAC) system, and,

323

EA-1371: Final Environmental Assessment | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

71: Final Environmental Assessment 71: Final Environmental Assessment EA-1371: Final Environmental Assessment Integrated Natural Resources Management Plan for Rock Creek Reserve The Department of Energy and the U.S. Fish and Wildlife Service should implement an Integrated Natural Resource Management Plan for Rock Creek Reserve located in the Buffer Zone at the Rocky Flats Environmental Technology Site for the period 2001-2006 (or until closure) to manage natural resources, as well as to support the Rocky Flats cleanup and closure mission, and compliance with various environmental laws. Full implementation of the plan will also ensure the continued quality of Rock Creek Reserve's natural resources for the ultimate re-use and land ownership decisions yet to be made. Implementing the Rock Creek Reserve

324

Environmental Assessment for the Oak Ridge Science and Technology Project at the Oak Ridge National Laboratory, Oak Ridge, Tennessee  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

81(E)/020508 81(E)/020508 FINDING OF NO SIGNIFICANT IMPACT OAK RIDGE SCIENCE AND TECHNOLOGY PROJECT AT THE OAK RIDGE NATIONAL LABORATORY, OAK RIDGE, TENNESSEE AGENCY: U. S. Department of Energy ACTION: Finding of No Significant Impact. SUMMARY: The U. S. Department of Energy (DOE) has completed an Environmental Assessment (EA) (DOE/EA-1575) for the Oak Ridge Science and Technology Project (ORSTP) at the Oak Ridge National Laboratory (ORNL). The proposed action would advance technology transfer and other missions at ORNL by supporting technology commercialization, creating new companies, and stimulating technology-based recruitment. Funding for the ORSTP would primarily be from private, other federal, and state sources. As a part of the ORSTP, DOE would also establish the Oak Ridge Science and

325

Flat-Plate Photovoltaic Modules  

Energy.gov (U.S. Department of Energy (DOE))

Flat-plate photovoltaic (PV) modules are made of several components, including the front surface materials, encapsulant, rear surface, and frame.

326

Available Technologies  

Energy Storage and Recovery; Renewable Energy; Environmental Technologies. Monitoring and Imaging; Remediation; Modeling; Imaging & Lasers.

327

Health and environmental effects of oil and gas technologies: research needs  

Science Conference Proceedings (OSTI)

This report discusses health and environmental issues associated with oil and gas technologies as they are currently perceived - both those that exist and those that are expected to emerge over the next two decades. The various sections of this report contain discussions of specific problem areas and relevant new research activities which should be pursued. This is not an exhaustive investigation of all problem areas, but the report explores a wide range of issues to provide a comprehensive picture of existing uncertainties, trends, and other factors that should serve as the focus of future research. The problem areas of major concern include: effects of drilling fluids, offshore accidents, refineries and worker health, and biota and petroleum spills, indoor air pollution, information transfer, and unconventional resources. These are highlighted in the Executive Summary because they pose serious threats to human health and the environment, and because of the sparcity of accumulated knowledge related to their definition. Separate abstracts have been prepared for selected sections of this report for inclusion in the Energy Data Base. (DMC)

Brown, R. D.

1981-07-01T23:59:59.000Z

328

ESTABLISHMENT OF AN ENVIRONMENTAL CONTROL TECHNOLOGY LABORATORY WITH A CIRCULATING FLUIDIZED-BED COMBUSTION SYSTEM  

DOE Green Energy (OSTI)

This report presents the progress made on the project ''Establishment of an Environmental Control Technology Laboratory (ECTL) with a Circulating Fluidized-Bed Combustion (CFBC) System'' during the quarter April 1--June 30, 2004. The following tasks have been completed. First, the final specifications for the renovation of the new Combustion Laboratory and the construction of the CFB Combustor Building have been delivered to the architect, and invitations for construction bids for the two tasks have been released. Second, the component parts of the CFBC system have been designed after the design work for assembly parts of the CFBC system was completed. Third, the literature pertaining to Polychlorinated Dibenzo-p-Dioxins (PCDD) and Polychlorinated Dibenzofurans (PCDF) released during the incineration of solid waste, including municipal solid waste (MSW) and refuse-derived fuel (RDF) have been reviewed, and an experimental plan for fundamental research of MSW incineration on a simulated fluidized-bed combustion (FBC) facility has been prepared. Finally, the proposed work for the next quarter has been outlined in this report.

Wei-Ping Pan, Kunlei Liu; John T. Riley

2004-07-30T23:59:59.000Z

329

Environmental Assessment for Cleanup and Closure of the Energy Technology Engineering Center  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

45 45 E E N N V V I I R R O O N N M M E E N N T T A A L L A A S S S S E E S S S S M M E E N N T T F F O O R R C C L L E E A A N N U U P P A A N N D D C C L L O O S S U U R R E E O O F F T T H H E E E E N N E E R R G G Y Y T T E E C C H H N N O O L L O O G G Y Y E E N N G G I I N N E E E E R R I I N N G G C C E E N N T T E E R R FINAL March 2003 U.S. Department of Energy NNSA Service Center Oakland, CA Environmental Assessment for Cleanup and Closure of the Energy Technology Engineering Center i TABLE OF CONTENTS Acronyms ..........................................................................................................................................v Glossary...........................................................................................................................................vi 1.0 INTRODUCTION ..................................................................................................................

330

Helsinki University of Technology Department of Mechanical Engineering Energy Engineering and Environmental Protection Publications  

E-Print Network (OSTI)

, and neither technology nor markets for plastics recycling have properly developed. The driving force towardsHelsinki University of Technology Department of Mechanical Engineering Energy Engineering Oy Ab support funding (apurahoitus) 2003 Helsinki University of Technology Energy Engineering

Zevenhoven, Ron

331

Microgap flat panel display  

DOE Patents (OSTI)

A microgap flat panel display which includes a thin gas-filled display tube that utilizes switched X-Y "pixel" strips to trigger electron avalanches and activate a phosphor at a given location on a display screen. The panel utilizes the principal of electron multiplication in a gas subjected to a high electric field to provide sufficient electron current to activate standard luminescent phosphors located on an anode. The X-Y conductive strips of a few micron widths may for example, be deposited on opposite sides of a thin insulating substrate, or on one side of the adjacent substrates and function as a cathode. The X-Y strips are separated from the anode by a gap filled with a suitable gas. Electrical bias is selectively switched onto X and Y strips to activate a "pixel" in the region where these strips overlap. A small amount of a long-lived radioisotope is used to initiate an electron avalanche in the overlap region when bias is applied. The avalanche travels through the gas filled gap and activates a luminescent phosphor of a selected color. The bias is adjusted to give a proportional electron multiplication to control brightness for given pixel.

Wuest, Craig R. (Danville, CA)

1998-01-01T23:59:59.000Z

332

ENVIRONMENTAL  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

797 797 FINAL ENVIRONMENTAL ASSESSMENT FOR DEPARTMENT OF ENERGY LOAN GUARANTEE FOR THE AGUA CALIENTE SOLAR PROJECT IN YUMA COUNTY, ARIZONA U.S. Department of Energy Loan Guarantee Program Office Washington, DC 20585 November 2010 TABLE OF CONTENTS Section Page Executive Summary .................................................................................................................ES-1 Introduction ..........................................................................................................................ES-1 Purpose and Need ...............................................................................................................ES-1 Proposed Action and Alternatives........................................................................................ES-2

333

Establishment of an Environmental Control Technology Laboratory with a Circulating Fluidized-Bed Combustion System  

DOE Green Energy (OSTI)

This report is to present the progress made on the project entitled ''Establishment of an Environmental Control Technology Laboratory (ECTL) with a Circulating Fluidized-Bed Combustion (CFBC) System'' during the period January 1, 2007 through March 31, 2007. The effort in this quarter has concentrated on installing the CFBC Facility and for conducting cold fluidization operations tests in the CFBC facility. The assembly of the ash recirculation pipe duct from the cyclones back to the bed area of the combustor, including the upper and lower loop seals was completed. The electric bed pre-heater was installed to heat the fluidizing air as it enters the wind box. The induced draft fan along with its machine base and power supply was received and installed. The flue gas duct from secondary cyclone outlet to induced draft fan inlet was received and installed, as well as the induced fan flue gas discharge duct. Pressure testing from the forced draft fan to the outlet of the induced fan was completed. In related research a pilot-scale halogen addition test was conducted in the empty slipstream reactor (without (Selective Catalytic Reduction) SCR catalyst loading) and the SCR slipstream reactor with two commercial SCR catalysts. The greatest benefits of conducting slipstream tests can be flexible control and isolation of specific factors. This facility is currently used in full-scale utility and will be combined into 0.6MW CFBC in the future. This work attempts to first investigate performance of the SCR catalyst in the flue gas atmosphere when burning Powder River Basin (PRB), including the impact of PRB coal flue gas composition on the reduction of nitrogen oxides (NOx) and the oxidation of elemental mercury (Hg(0)) under SCR conditions. Secondly, the impacts of hydrogen halogens (Hydrogen fluoride (HF), Hydrogen chloride (HCl), Hydrogen Bromide (HBr) and Hydrogen Iodine (HI)) on Hg(0) oxidation and their mechanisms can be explored.

Wei-Ping Pan; Yan Cao; John Smith

2007-03-31T23:59:59.000Z

334

DOE/EIS-0026-SA-03: Supplement Analysis for The Disposal of Certain Rocky Flats Plutonium-Bearing Materials at the Waste Isolation Pilot Plant (11/08/02)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Supplement Analysis For Disposal of Certain Rocky Flats Supplement Analysis For Disposal of Certain Rocky Flats Plutonium-Bearing Materials at the Waste Isolation Pilot Plant PURPOSE The U.S. Department of Energy (DOE) is proposing to revise its approach for managing approximately 0.97 metric tons (MT) of plutonium-bearing materials (containing about 0.18 MT of surplus plutonium) located at the Rocky Flats Environmental Technology Site (RFETS). DOE is proposing to repackage and transport these materials for direct disposal at the Waste Isolation Pilot Plant (WIPP) near Carlsbad, New Mexico. Several DOE environmental impact statements (EISs) discuss the potential impacts from different proposed alternatives for the storage and disposition of surplus plutonium and waste containing surplus plutonium. These EISs evaluated and presented the potential impacts for

335

Final Transuranic Waste Shipment Leaves Rocky Flats | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Final Transuranic Waste Shipment Leaves Rocky Flats Final Transuranic Waste Shipment Leaves Rocky Flats Final Transuranic Waste Shipment Leaves Rocky Flats April 19, 2005 - 12:23pm Addthis Cleanup Ahead of Schedule, On Track to Save Taxpayers Billions GOLDEN, CO. - A major environmental victory was achieved at the Rocky Flats Site in Golden, Colo., today when the final remaining shipment of radioactive, transuranic (TRU) waste left the property on a truck bound for an underground waste repository in New Mexico. This major milestone is another step toward the final conversion of the site to a National Wildlife Refuge managed by the U.S. Fish and Wildlife Service. "This is great news for all of Colorado, and would not have been possible without hand-in-glove cooperation between the Department of Energy, the

336

Final Rocky Flats Cleanup Agreement, July 19, 1996 Summary  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Rocky Flats Cleanup Agreement Rocky Flats Cleanup Agreement State Colorado Agreement Type Federal Facility Agreement Legal Driver(s) CERCLA/RCRA Scope Summary Establish the regulatory framework for achieving the ultimate cleanup of the Rocky Flats Site. Parties DOE; US EPA; The State of Colorado Date 7/19/1996 SCOPE * Establish the regulatory framework for achieving the ultimate cleanup of the Rocky Flats Site. * Ensure that the environmental impacts associated with activities at the Site will continue to be investigated and that appropriate response actions are taken. * Establish a procedural framework and schedule for developing, implementing, and monitoring appropriate response actions at the site. * Coordinate all of DOE's cleanup obligations under CERCLA, RCRA, and the Colorado

337

Gabbs Alkali Flat Geothermal Area | Open Energy Information  

Open Energy Info (EERE)

Gabbs Alkali Flat Geothermal Area Gabbs Alkali Flat Geothermal Area (Redirected from Gabbs Alkali Flat Area) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Geothermal Resource Area: Gabbs Alkali Flat Geothermal Area Contents 1 Area Overview 2 History and Infrastructure 3 Regulatory and Environmental Issues 4 Exploration History 5 Well Field Description 6 Geology of the Area 7 Geofluid Geochemistry 8 NEPA-Related Analyses (0) 9 Exploration Activities (2) 10 References Area Overview Geothermal Area Profile Location: Nevada Exploration Region: Walker-Lane Transition Zone Geothermal Region GEA Development Phase: 2008 USGS Resource Estimate Mean Reservoir Temp: Estimated Reservoir Volume: Mean Capacity: Click "Edit With Form" above to add content History and Infrastructure Operating Power Plants: 0

338

Tethys: The Marine and Hydrokinetic Technology Environmental Impacts Knowledge Management System -- Requirements Specification -- Version 1.0  

SciTech Connect

The marine and hydrokinetic (MHK) environmental impacts knowledge management system (KMS), dubbed Tethys after the mythical Greek goddess of the seas, is being developed for the U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy Wind and Hydropower Technologies Program (WHTP) by Pacific Northwest National Laboratory (PNNL). This requirements specification establishes the essential capabilities required of Tethys and clarifies for WHTP and the Tethys development team the results that must be achieved by the system.

Butner, R. Scott; Snowden-Swan, Lesley J.; Ellis, Peter C.

2010-11-09T23:59:59.000Z

339

Environmental management technology demonstration and commercialization: Tasks 2, 3, 4, and 8. Semiannual report, October 1994--March 1995  

Science Conference Proceedings (OSTI)

The objective of the Environmental Management program at the Energy and Environmental Research Center (EERC) is to develop, demonstrate, and commercialize technologies that address the environmental management needs of contaminated sites, including characterization, sensors, and monitoring; low-level mixed waste processing; material disposition technology; improved waste forms; in situ containment and remediation; and efficient separation technologies for radioactive wastes. Task 2 is the extraction and analysis of pollutant organics from contaminated solids using off-line supercritical fluid extraction (SFE) and on-line SFE-infrared spectroscopy. Task 3, pyrolysis of plastics, has as its objectives to develop a commercial process to significantly reduce the volume of mixed-plastics-paper-resin waste contaminated with low-level radioactive material; concentrate contaminants in a collectible form; and determine the distribution and form of contaminants after pyrolysis of the mixed waste. Task 4, stabilization of vitrified wastes, has as its objectives to (1) demonstrate a waste vitrification procedure for enhanced stabilization of waste materials and (2) develop a testing protocol to understand the long-term leaching behavior of the stabilized waste form. The primary objective of Task 8, Management and reporting, is coordination of this project with other programs and opportunities. In addition, management oversight will be maintained to ensure that tasks are completed and coordinated as planned and that deliverables are submitted in a timely manner. Accomplishments to date is each task are described. 62 refs.

Hawthorne, S.B.; Ness, R.O. Jr.; Nowok, J.W.; Pflughoeft-Hassett, D.; Hurley, J.P.; Steadman, E.N.

1995-05-01T23:59:59.000Z

340

TREATMENT OF MULTIVARIATE ENVIRONMENTAL AND HEALTH PROBLEMS ASSOCIATED WITH OIL SHALE TECHNOLOGY  

E-Print Network (OSTI)

Jr. and M. D. Shelby, "Chemicals Identified in Oil Shaleand Shale Oil. list." 1. Preliminary Environmental Mutagenof Trace Contaminants in Oil Shale Retort Wa- ters", Am.

Kland, M.J.

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "flats environmental technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Regional, Economic, and Environmental Implications of Dual Ethanol Technologies in Brazil  

E-Print Network (OSTI)

Climate change, food security, and energy efficiency have become universal challenges for global economic development and environmental conservation that demand in-depth multidisciplinary research. Biofuels have emerged ...

Guerrero Compean, Roberto

342

TREATMENT OF MULTIVARIATE ENVIRONMENTAL AND HEALTH PROBLEMS ASSOCIATED WITH OIL SHALE TECHNOLOGY  

E-Print Network (OSTI)

Jr. and M. D. Shelby, "Chemicals Identified in Oil Shaleand Shale Oil. list." 1. Preliminary Environmental MutagenTrace Contaminants in Oil Shale Retort Wa- ters", Am. Chern.

Kland, M.J.

2010-01-01T23:59:59.000Z

343

Technology partnerships: Enhancing the competitiveness, efficiency, and environmental quality of American industry  

SciTech Connect

An overview of the Department of Energy`s Office of Industrial Technologies and its private sector partnerships is presented. Commercial success stories and real-world benefits of the technology partnerships are discussed.

1995-04-01T23:59:59.000Z

344

Health and environmental effects of synthetic fuel technologies: research priorities. Report to the Federal Interagency Committee on the health and environmental effects of energy technologies  

DOE Green Energy (OSTI)

This report is an assessment of the health and environmental effects research priorities related to coal gasification and liquefaction and oil shale development. It reflects the subjective judgments of well chosen research scientists in relevant disciplines. These scientists reviewed the results of workshops conducted in 1978 on coal gasification and liquefaction and oil shale, background information on related federal research, and comments by relevant federal agencies. The scientists prepared a listing of current research needs according to major areas of concern. These were categorized as to generic, region-specific, or process specific research. For the latter category, various scales of development were addressed for two exemplary processes: SRC (solvent refined coal) II and above ground oil shale retorting. Subjective judgments were used to prioritize the research tasks and assess the adequacy of current research.

Brown, R.D.

1981-04-01T23:59:59.000Z

345

Windy Flats | Open Energy Information  

Open Energy Info (EERE)

Flats Flats Jump to: navigation, search Name Windy Flats Facility Windy Flats Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner Cannon Power Group Developer Cannon Power Group Location North shore of Columbia River Coordinates 45.699622°, -120.774622° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":45.699622,"lon":-120.774622,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

346

IBM's New Flat Panel Displays  

NLE Websites -- All DOE Office Websites (Extended Search)

by J. Sthr (SSRL), M. Samant (IBM), J. Lning (SSRL) Today's laptop computers utilize flat panel displays where the light transmission from the back to the front of the display...

347

Innovative Water Management Technology to Reduce Environmental Impacts of Produced Water  

Science Conference Proceedings (OSTI)

Clemson University with Chevron as an industry partner developed and applied treatment technology using constructed wetland systems to decrease targeted constituents in simulated and actual produced waters to achieve reuse criteria and discharge limits. Pilot-scale and demonstration constructed wetland treatment system (CWTS) experiments led to design strategies for treating a variety of constituents of concern (COCs) in produced waters including divalent metals, metalloids, oil and grease, and ammonia. Targeted biogeochemical pathways for treatment of COCs in pilot-scale CWTS experiments included divalent metal sulfide precipitation through dissimilatory sulfate reduction, metal precipitation through oxidation, reduction of selenite to insoluble elemental selenium, aerobic biodegradation of oil, nitrification of ammonia to nitrate, denitrification of nitrate to nitrogen gas, separation of oil using an oilwater separator, and sorption of ammonia to zeolite. Treatment performance results indicated that CWTSs can be designed and built to promote specific environmental and geochemical conditions in order for targeted biogeochemical pathways to operate. The demonstration system successfully achieved consistent removal extents even while inflow concentrations of COCs in the produced water differed by orders of magnitude. Design strategies used in the pilot-scale and demonstration CWTSs to promote specific conditions that can be applied to designing full-scale CWTSs include plant and soil selection, water-depth selection, addition of amendments, and hydraulic retention time (HRT). These strategies allow conditions within a CWTS to be modified to achieve ranges necessary for the preferred biogeochemical treatment pathways. In the case of renovating a produced water containing COCs that require different biogeochemical pathways for treatment, a CWTS can be designed with sequential cells that promote different conditions. For example, the pilot-scale CWTS for post-reverse osmosis produced water was designed to promote oxidizing conditions within the first wetland cell for nitrification of ammonia, and the subsequent three cells were designed to promote reducing conditions for denitrification of nitrate. By incorporating multiple wetland cells in a CWTS, the conditions within each cell can be modified for removal of specific COCs. In addition, a CWTS designed with multiple cells allows for convenient sample collection points so that biogeochemical conditions of individual cells can be monitored and performance evaluated. Removal rate coefficients determined from the pilot-scale CWTS experiments and confirmed by the demonstration system can be used to calculate HRTs required to treat COCs in full-scale CWTSs. The calculated HRTs can then be used to determine the surface area or ?footprint? of a full-size CWTS for a given inflow rate of produced water.

Castle, James; Rodgers, John; Alley, Bethany; Beebe, Alex; Coffey, Ruthanne; Jurinko, Kristen; Pardue, Michael; Ritter, Tina; Spacil, Michael

2013-05-15T23:59:59.000Z

348

Revegetation of the Rocky Flats Site | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Revegetation of the Rocky Flats Site Revegetation of the Rocky Flats Site Revegetation of the Rocky Flats, Colorado Site Revegetation of the Rocky Flats Site More Documents &...

349

Evaluating, Migrating, and Consolidating Databases and Applications for Long-Term Surveillance and Maintenance Activities at the Rocky Flats Site  

SciTech Connect

The U.S. Department of Energy (DOE) Office of Legacy Management (LM) is assuming responsibilities for long-term surveillance and maintenance (LTS and M) activities at the Rocky Flats Environmental Technology Site (RFETS) during fiscal year 2006. During the transition, LM is consolidating databases and applications that support these various functions into a few applications which will streamline future management and retrieval of data. This paper discussed the process of evaluating, migrating, and consolidating these databases and applications for LTS and M activities and provides lessons learned that will benefit future transitions. (authors)

Surovchak, S. [U.S. Department of Energy, Office of Legacy Management, Broomfield, Colorado (United States); Marutzky, S.; Thompson, B.; Miller, K.; Labonte, E. [S.M. Stoller Corporation, Grand Junction, Colorado (United States)

2006-07-01T23:59:59.000Z

350

ENERGY UTILIZATION AND ENVIRONMENTAL CONTROL TECHNOLOGIES IN THE COAL-ELECTRIC CYCLE  

E-Print Network (OSTI)

Electric Generation Technology Conventional Coal-Fired PowerPlants Advanced Coal-Electric Plants OperatingCharacteristics for Conventional Coal- Fired Power

Ferrell, G.C.

2010-01-01T23:59:59.000Z

351

Carbon nanotube synthesis and detection : limiting the environmental impact of novel technologies  

E-Print Network (OSTI)

Driven by commercial promise, the carbon nanotube (CNT) industry is growing rapidly, yet little is known about the potential environmental impacts of these novel materials. In particular, there are no methods to detect ...

Plata, Desire L

2009-01-01T23:59:59.000Z

352

Comparative assessment of environmental welfare issues associated with the satellite power system (SPS) and alternative technologies  

DOE Green Energy (OSTI)

Environmental deterioration can affect an individual's health, safety, and welfare (examples of welfare effects include reduced crop yield, loss of property, and interference with other activities). This study identifies sources of environmental deterioration and associated welfare effects from two mature electric power generation systems (combustion of coal and light water nuclear reactors) and compares these with those expected from a conceptual satellite power system. Each activity within the energy pathway for each power system is examined to determine the potential welfare effects it imposes on a community. The severities of these effects are compared. On the basis of this comparison and the state of knowledge concerning specific environmental impacts and welfare effects, key environmental issues are identified for subsequent, in-depth analyses.

Levine, E.P.; Senew, M.J.; Cirillo, R.R.

1980-04-01T23:59:59.000Z

353

The Federal Energy Technology Center annual site environmental report for calendar year 1998  

SciTech Connect

A comprehensive Directives Program aimed at environmental, safety, and health requirements and risks was initiated in 1997 and will be completed in late 1999 or early 2000. The primary objective of the program is to identify or develop a set of standards that, when implemented, provides reasonable assurance that the health and safety of the workers, public, and the environment will be protected during the performance of the work. In conjunction with the Directives Program, the use of the voluntary environmental management system, ISO 14000, was evaluated. This includes the only environmental management standard to which an entity can be registered. Plans are to consider the specifications and guidance from this standard in the identification of an effective environmental management system for the merged FETC sites. A performance measurement system continued to be maintained during 1998 to assist in evaluating how effectively activities at FETC meet mission-critical goals and how well missions and strategies are connected in the DOE strategic plan. This system also provides data to assist in gauging performance against the DOE critical success factors, that is, performance against technical objectives. Various environmental milestones can be tracked to completion, thus giving the FETC measures by which to gauge the site's goals of remaining in regulatory compliance and achieving best-in-class environmental performance.

NONE

1999-10-31T23:59:59.000Z

354

Technology Evaluations Related to Mercury, Technetium, and Chloride in Treatment of Wastes at the Idaho Nuclear Technology and Engineering Center of the Idaho National Engineering and Environmental Laboratory  

SciTech Connect

The Idaho High-Level Waste and Facility Disposition Environmental Impact Statement defines alternative for treating and disposing of wastes stored at the Idaho Nuclear Technology and Engineering Center. Development is required for several technologies under consideration for treatment of these wastes. This report contains evaluations of whether specific treatment is needed and if so, by what methods, to remove mercury, technetium, and chlorides in proposed Environmental Impact Statement treatment processes. The evaluations of mercury include a review of regulatory requirements that would apply to mercury wastes in separations processes, an evaluation of the sensitivity of mercury flowrates and concentrations to changes in separations processing schemes and conditions, test results from laboratory-scale experiments of precipitation of mercury by sulfide precipitation agents from the TRUEX carbonate wash effluent, and evaluations of methods to remove mercury from New Waste Calcining Facility liquid and gaseous streams. The evaluation of technetium relates to the need for technetium removal and alternative methods to remove technetium from streams in separations processes. The need for removal of chlorides from New Waste Calcining Facility scrub solution is also evaluated.

C. M. Barnes; D. D. Taylor; S. C. Ashworth; J. B. Bosley; D. R. Haefner

1999-10-01T23:59:59.000Z

355

Available Technologies: Improvements to High Power Impulse ...  

APPLICATIONS OF TECHNOLOGY: Semiconductors, superconductors; Flat panel displays for computers, cell phones, PDAs ; Tools and automotive parts

356

Estimation of costs for applications of remediation technologies for the Department of Energy`s Programmatic Environmental Impact Statement  

SciTech Connect

The Programmatic Environmental impact Statement (PEIS) being developed by the US Department of Energy (DOE) for environmental restoration (ER) and waste management (WM) activities expected to be carried out across the DOE`s nationwide complex of facilities is assessing the impacts of removing, transporting, treating, storing, and disposing of waste from these ER and WM activities. Factors being considered include health and safety impacts to the public and to workers, impacts on the environment, costs and socio-economic impacts, and near-term and residual risk during those ER and WM operations. The purpose of this paper is to discuss the methodology developed specifically for the PEIS to estimate costs associated with the deployment and application of individual remediation technologies. These individual costs are used in developing order-of-magnitude cost estimates for the total remediation activities. Costs are developed on a per-unit-of-material-to-be-treated basis (i.e., $/m{sup 3}) to accommodate remediation projects of varying sizes. The primary focus of this cost-estimating effort was the development of capital and operating unit cost factors based on the amount of primary media to be removed, handled, and treated. The unit costs for individual treatment technologies were developed using information from a variety of sources, mainly from periodicals, EPA documentation, handbooks, vendor contacts, and cost models. The unit cost factors for individual technologies were adjusted to 1991 dollars.

Villegas, A.J.; Hansen, R.I.; Humphreys, K.K.; Paananen, J.M.; Gildea, L.F.

1994-03-01T23:59:59.000Z

357

Environmental assessment and finding of no significant impact: Biorecycling Technologies, Inc., Noble Biogas and Fertilizer Plant, Fresno County, California  

DOE Green Energy (OSTI)

The US Department of Energy (DOE) is considering a proposal from the California Energy Commission for partial funding up to $1,500,000 of the construction of the biorecycling Technologies, Inc., (BTI) Noble Biogas and Fertilizer Plant in Fresno County, California. BTI along with its contractors and business partners would develop the plant, which would use manure and green waste to produce biogas and a variety of organic fertilizer products. The California Energy Commission has requested funding from the DOE Commercialization Ventures program to assist in the construction of the plant, which would produce up to one megawatt of electricity by burning biogas in a cogeneration unit. The purpose of this environmental assessment (EA) is to provide DOE and the public with information on potential environmental impacts associated with funding development of the proposed project.

NONE

1997-09-01T23:59:59.000Z

358

Nature-oriented open coal mining technologies using mined-out space in an open-pit. Part II: A method for selecting rational sequence of mining flat dipping stratified deposits  

Science Conference Proceedings (OSTI)

A method is proposed for selecting a rational mining sequence with internal dumping for flat stratified deposits, using new principles of the open-pit process-space formation and development. The main criteria for substantiating the mining sequence are geometrical form and development direction of the open-pit space, structure of the working wall and transportation network, internal dumping capacities and mining earthworks volumes.

Molotilov, S.G.; Norri, V.K.; Cheskidov, V.I.; Mattis, A.R. [Russian Academy of Sciences, Novosibirsk (Russian Federation). Inst. of Mining

2007-01-15T23:59:59.000Z

359

Rocky Flats Closure Unit Cost Data  

SciTech Connect

The Rocky Flats Closure Project has completed the process of stabilizing residual nuclear materials, decommissioning nuclear facilities, remediating environmental media and closing the Rocky Flats Site (Site). The project cost approximately $4.1 B and included the decommissioning of over 700 structures including 5 major plutonium facilities and 5 major uranium facilities, shipping over 14,600 cubic meters of transuranic and 565,000 cubic meters of low level radioactive waste, and remediating a 385-acre industrial area and the surrounding land. Actual costs were collected for a large variety of closure activities. These costs can be correlated with metrics associated with the facilities and environmental media to capture cost factors from the project that could be applicable to a variety of other closure projects both within and outside of the Department of Energy's weapons complex. The paper covers four general topics: the process to correlate the actual costs and metrics, an example of the correlated data for one large sub-project, a discussion of the results, and the additional activities that are planned to correlate and make this data available to the public. The process to collect and arrange the project control data of the Closure Project relied on the actual Closure Project cost information. It was used to correlate these actual costs with the metrics for the physical work, such as building area or waste generated, to support the development of parametric cost factors. The example provides cost factors for the Industrial Sites Project. The discussion addresses the strengths and weaknesses of the data, followed by a section identifying future activities to improve and extend the analyses and integrate it within the Department's Environmental Cost Analysis System. (authors)

Sanford, P.C. [1129 Business Parkway South, Westminister, MD (United States); Skokan, B. [United States Department of Energy, Washington, DC (United States)

2007-07-01T23:59:59.000Z

360

Risk-Quantified Decision-Making at Rocky Flats  

SciTech Connect

Surface soils in the 903 Pad Lip Area of the Rocky Flats Environmental Technology Site (RFETS) were contaminated with {sup 239/240}Pu by site operations. To meet remediation goals, accurate definition of areas where {sup 239/240}Pu activity exceeded the threshold level of 50 pCi/g and those below 50- pCi/g needed definition. In addition, the confidence for remedial decisions needed to be quantified and displayed visually. Remedial objectives needed to achieve a 90 percent certainty that unremediated soils had less than a 10 percent chance of {sup 239/240}Pu activity exceeding 50-pCi/g. Removing areas where the chance of exceedance is greater than 10 percent creates a 90 percent confidence in the remedial effort results. To achieve the stipulated goals, the geostatistical approach of probability kriging (Myers 1997) was implemented. Lessons learnt: Geostatistical techniques provided a risk-quantified approach to remedial decision-making and provided visualizations of the excavation area. Error analysis demonstrated compliance and confirmed that more than sufficient soils were removed. Error analysis also illustrated that any soils above the threshold that were not removed would be of nominal activity. These quantitative approaches were useful from a regulatory, engineering, and stakeholder satisfaction perspective.

Myers, Jeffrey C. [Washington Safety Management Solutions, Aiken, South Carolina (United States)

2008-01-15T23:59:59.000Z

Note: This page contains sample records for the topic "flats environmental technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Strategic Environmental Research and Development Project FY 1994: Assessing national remote sensing technologies for use in US Department of Energy Environmental Restoration Activities, Oak Ridge Solid Waste Storage Area 4 case study  

SciTech Connect

During FY 1994, the Oak Ridge Environmental Restoration (ER) Remote Sensing Program teamed with members of the Oak Ridge National Security Program Office (NSPO), the Environmental Research Institute of Michigan (ERIM) under contract to the National Exploitation Laboratory (NEL), the Oak Ridge Waste Area Group 4 (WAG 4) ER Program, and the US Department of Energy (DOE), Offices of Technology Development, Nonproliferation and National Security, and Environmental Restoration, to conduct a test and demonstration of the uses of national remote sensing technologies at DOE hazardous waste sites located in Oak Ridge, Tennessee. Objectives of the Oak Ridge study were to determine if national remote sensing technologies are useful in conducting prescreening, characterization, and/or monitoring activities to expedite the clean-up process at hazardous waste sites and to cut clean-up costs wherever possible. This project was sponsored by the Strategic Environmental Research and Development Project (SERDP).

King, A.L.; Smyre, J.L.; Evers, T.K.

1995-02-01T23:59:59.000Z

362

Review of US Department of Energy health and environmental research and development program support to SRC-II technology development  

DOE Green Energy (OSTI)

This document outlines the technical framework of DOE's overall synthetic fuels health and environmental characterization program. Current project environmental activities directly associated with SRC-II technology development are summarized for the convenience of the Environmental Impact Statement reviewers. An extended, technically detailed statement of the SRC-II health and environmental program, activities, and plans was released in late 1980, as part of the final Environmental Impact Statement of the SRC-II Demonstration Project. Program development is necessarily iterative. Early screening results on a small scale equipment suggest the need for further screening studies on a larger-scale system. Results of screening studies set the priorities for more extensive and costly long-term baseline biological and ecological studies. Parametric studies establish the sensitivity of measured screening and baseline characteristics to changes in processing conditions and also provide a basis for correlating low- and high-tier biological and ecological test information. Monitoring system development is stimulated by findings in screening and baseline characterization efforts. Choice of monitoring systems is dependent upon screening and baseline biological and ecological test results and results of initial site analyses. As a result, the overall characterization program necessarily emerges in phases, each with a distribution of activities in the four component areas. Characterization efforts on PDU- and pilot-scale equipment focus on screening and baseline studies of steady state and non-steady state production. At the demonstration scale, these activities are expanded to include extensive monitoring and the investigation of large-scale steady state and non-steady state effluent production and control characteristics.

Massey, M.J.; Fillo, J.P.; Kreisher, J.H.; Sgro, G.A.

1980-07-01T23:59:59.000Z

363

Program on Technology Innovation: Prediction and Evaluation of Environmentally Assisted Cracking in LWR Structural Materials  

Science Conference Proceedings (OSTI)

This report describes the final results of Phase III of a three-year joint research program sponsored by EPRI in collaboration with Fracture & Reliability Research Institute (FRRI) at Tohoku University, Japanese utilities, vendors, and international organizations. The program addressed environmentally assisted cracking (EAC) of light water reactor (LWR) structural materials in pressurized water reactor (PWR) and boiling water reactor (BWR) environments.

2007-11-20T23:59:59.000Z

364

Program on Technology Innovation: Prediction and Evaluation of Environmentally Assisted Cracking in LWR Structural Materials  

Science Conference Proceedings (OSTI)

This report describes the interim results of Phase III of a joint research program sponsored by EPRI in collaboration with the Fracture Reliability Research Institute (FRRI) at Tohoku University, Japanese utilities, vendors, and international organizations to address environmentally assisted cracking (EAC) of LWR structural materials.

2005-11-30T23:59:59.000Z

365

Program on Technology Innovation: Prediction and Evaluation of Environmentally Assisted Cracking in LWR Structural Materials  

Science Conference Proceedings (OSTI)

This report describes the interim results of PEACE-E, a Five-year extension of the joint research program sponsored by EPRI in collaboration with the Fracture Reliability Research Institute (FRRI) at Tohoku University, Japanese utilities, vendors, and international organizations. The program addressed environmentally assisted cracking (EAC) of light water reactor structural materials in PWR and BWR environments.

2008-11-24T23:59:59.000Z

366

Gabbs Alkali Flat Geothermal Area | Open Energy Information  

Open Energy Info (EERE)

Gabbs Alkali Flat Geothermal Area Gabbs Alkali Flat Geothermal Area Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Geothermal Resource Area: Gabbs Alkali Flat Geothermal Area Contents 1 Area Overview 2 History and Infrastructure 3 Regulatory and Environmental Issues 4 Exploration History 5 Well Field Description 6 Geology of the Area 7 Geofluid Geochemistry 8 NEPA-Related Analyses (0) 9 Exploration Activities (2) 10 References Area Overview Geothermal Area Profile Location: Nevada Exploration Region: Walker-Lane Transition Zone Geothermal Region GEA Development Phase: 2008 USGS Resource Estimate Mean Reservoir Temp: Estimated Reservoir Volume: Mean Capacity: Click "Edit With Form" above to add content History and Infrastructure Operating Power Plants: 0 No geothermal plants listed.

367

Environmental Energy Technologies Division Newsletter, Fall 2007,Vol.4, No. 4)  

SciTech Connect

This issue's special focus is on advanced lithium ionbatteries for hybrid electric vehicle applications. The four articlesaddressing this area explore the modeling of lithium ion batterychemistries; the use of advanced diagnostic methods to study the physicsand chemistry of battery materials; a laboratory for advanced batterytesting; and approaches for improving battery safety. EETD's research isfunded by the Department of Energy's BATT (Batteries for AdvancedTransportation Technologies) program, FreedomCar and Vehicle TechnologiesProgram.

Chen, Allan (Editor)

2007-12-14T23:59:59.000Z

368

Review and analysis of oil shale technologies. Volume I. Oil shale deposits, mining methods, and environmental concerns  

SciTech Connect

This volume describes and discusses oil shale deposits of the U.S., applicable methods for mining the shale, and the environmental concerns associated with oil shale technologies. Mining is required to supply shale to the retorts of aboveground processes. The majority of oil shale mining is expected to be by the underground room-and-pillar method. Surface mining (i.e., open pit mining) may also be used to supply material for surface retorts and may be appropriate for up to 15 to 20% of the oil shale resources. Principal environmental issues unique to true and modified in situ oil shale processing include disposal of retort water and drill cuttings, migration of fluids during and after in situ processing, surface thermal changes, and hazardous materials that may be leached from spent shale. Other site-specific problems of in situ processing include off-gas emissions, fugitive dust generation, land disturbance, and water usage. The environmental issues are similar for oil shale surface processes, except for surface thermal changes. The degree of impact, however, is expected greater than that for either the true or the modified in situ process.

Jee, C.K.; White, J.D.; Bhatia, S.K.; Nicholson, D.

1977-08-01T23:59:59.000Z

369

Program on Technology Innovation: Prediction and Evaluation of Environmentally Assisted Cracking in LWR Structural Materials  

Science Conference Proceedings (OSTI)

This report describes the interim results of PEACE-E, a five-year extension of the joint research program sponsored by EPRI in collaboration with Fracture & Reliability Research Institute (FRRI) at Tohoku University, Japanese utilities, vendors, and international organizations. The program addressed environmentally assisted cracking (EAC) of light water reactor (LWR) structural materials in pressurized water reactor (PWR) and boiling water reactor (BWR) environments.

2009-12-16T23:59:59.000Z

370

U.S. EPA Environmental Technology Verification (ETV) Program Advanced Monitoring Systems (AMS) Center  

E-Print Network (OSTI)

Hammons, EPA Loretta Lehrman, EPA Region 5 Dennis Mikel, EPA Will Ollison, American Petroleum Institute Blue-Green Algae for Microcystins in Freshwater Sources Monitoring Technologies for Measuring Stored) Devices at Petroleum Refineries and Chemical Plants These are infrared cameras that allow simultaneous

371

U.S. EPA Environmental Technology Verification (ETV) Program Materials Management and Remediation Center  

E-Print Network (OSTI)

contaminated materials, their sources, and potential solutions fall within the purview of a particular ETV). Most LD technologies were developed to detect releases of petroleum and to detect the presence of water in petroleum. Since petroleum and ethanol have different chemical and physical properties, the current LD

372

EPA/600/R-09/043 Today's Environmental Technologies--Innovative Solutions  

E-Print Network (OSTI)

create competitive advantage opportunities is that they offer a vehicle for some firms to shift existing harmful components, minimizing pollutant releases to air, and water and soil during manufacturing technologies in manufacturing. In Sarkis, J. (ed.), Greener Manufacturing #12;22 and Operations: From Design

373

Assessing selected technologies and operational strategies for improving the environmental performance of future aircraft  

E-Print Network (OSTI)

The aviation industry is expected to grow at a rate of 4-5% in the next 20 years. Such a growth rate may have important impacts on local air quality, climate change and community noise. This work assesses selected technologies ...

Mahashabde, Anuja (Anuja Anil)

2006-01-01T23:59:59.000Z

374

Technologies  

Technologies Materials. Aggregate Spray for Air Particulate; Actuators Made From Nanoporous Materials; Ceramic Filters; Energy Absorbing Material; Diode Arrays for ...

375

Technologies  

Science & Technology. Weapons & Complex Integration. News Center. News Center. Around the Lab. Contacts. For Reporters. Livermore Lab Report. ...

376

Technologies  

Technologies Energy. Advanced Carbon Aerogels for Energy Applications; Distributed Automated Demand Response; Electrostatic Generator/Motor; Modular Electromechanical ...

377

Technologies  

Technologies Energy, Utilities, & Power Systems. Advanced Carbon Aerogels for Energy Applications; Distributed Automated Demand Response; Electrostatic Generator/Motor

378

Technologies  

Technologies Research Tools. Cell-Free Assembly of NanoLipoprotein Particles; Chemical Prism; Lawrence Livermore Microbial Detection Array (LLMDA) ...

379

Comparison of Alternate Cooling Technologies for U.S. Power Plants: Economic, Environmental, and Other Tradeoffs  

Science Conference Proceedings (OSTI)

Steam condenser cooling is normally the largest consumptive use of water at an electric power plant. In many situations, the desire to save water leads to the consideration of dry or wet/dry cooling in order to reduce plant water requirements. This report provides data and a method for determining the cost and effect on plant performance associated with the use of these technologies in place of recirculating wet cooling.

2004-09-09T23:59:59.000Z

380

Corrugated cover plate for flat plate collector  

SciTech Connect

A flat plate radiant energy collector is providing having a transparent cover. The cover has a V-corrugated shape which reduces the amount of energy reflected by the cover away from the flat plate absorber of the collector.

Hollands, K. G. Terry (Elora, CA); Sibbitt, Bruce (Waterloo, CA)

1978-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "flats environmental technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Flat heat pipe design, construction, and analysis  

SciTech Connect

This paper details the design, construction and partial analysis of a low temperature flat heat pipe in order to determine the feasibility of implementing flat heat pipes into thermophotovoltaic (TPV) energy conversion systems.

Voegler, G.; Boughey, B.; Cerza, M.; Lindler, K.W.

1999-08-02T23:59:59.000Z

382

Health and environmental effects of synthetic fuel technologies: research priorities. Final report  

DOE Green Energy (OSTI)

This report is an assessment of the health and environmental effects research priorities related to coal gasification and liquefaction and oil shale development. It reflects the subjective judgements of well chosen research scientists in relevant disciplines. These scientists reviewed the results of workshops conducted in 1978 on coal gasification and liquefaction and oil shale (see PB-296 708, PB-297 096, and PB-297 618), background information on related Federal research, and comments by relevant Federal agencies. The scientists prepared a listing of current research needs according to major areas of concern. These were categorized as to generic, region-specific, or process specific research. For the latter category, various scales of development were addressed for two exemplary processes: SRC (solvent refined coal) II and above ground oil shale retorting. Subjective judgements were used to prioritize the research tasks and assess the adequacy of current research.

Brown, R.D.

1981-04-01T23:59:59.000Z

383

Technologies  

High Performance Computing (HPC) Technologies; Industrial Partnerships Office P.O. Box 808, L-795 Livermore, CA 94551 Phone: (925) 422-6416 Fax: (925) ...

384

Interim qualification tests and procedures for terrestrial photovoltaic thin-film flat-plate modules  

DOE Green Energy (OSTI)

This document provides recommended procedures and specifications for qualification tests that are structured to evaluate terrestrial thin-film flat-plate photovoltaic nonconcentrating modules intended for power generation applications. The qualification tests provided in this document are designed to evaluate flat-plate thin-film photovoltaic (PV) module design performance and susceptibility to known failure mechanisms. Emphasis is placed on testing and evaluating module performance characteristics and design features that will affect possible degradation of module performance and physical properties resulting from solar exposure, environmental weathering, mechanical loading, corrosion, and module shadowing. Because of limited thin-film module field operation experience and the evolutionary nature of new thin-film module material technologies and designs, these tests should not be considered definitive or complete, nor do they provide a basis to predict 30-year field life. Current understanding of failure and degradation mechanisms and the relationship between accelerated tests and field reliability is not sufficient to allow accurate estimation of life-expectancy, nor are the cycling tests given in this document considered to be equivalent to a full 30-year field exposure. However, the test and evaluation procedures given in this document provide a common approach for conducting qualification tests. Acceptable results from these tests should provide reasonable assurance that the modules that pass these tests will perform reliably in the field but for an unspecified period of time. 8 refs., 6 figs.

DeBlasio, R.; Mrig, L.; Waddington, D.

1990-01-01T23:59:59.000Z

385

Geothermal Program Review XI: proceedings. Geothermal Energy - The Environmental Responsible Energy Technology for the Nineties  

DOE Green Energy (OSTI)

These proceedings contain papers pertaining to current research and development of geothermal energy in the USA. The seven sections of the document are: Overview, The Geysers, Exploration and Reservoir Characterization, Drilling, Energy Conversion, Advanced Systems, and Potpourri. The Overview presents current DOE energy policy and industry perspectives. Reservoir studies, injection, and seismic monitoring are reported for the geysers geothermal field. Aspects of geology, geochemistry and models of geothermal exploration are described. The Drilling section contains information on lost circulation, memory logging tools, and slim-hole drilling. Topics considered in energy conversion are efforts at NREL, condensation on turbines and geothermal materials. Advanced Systems include hot dry rock studies and Fenton Hill flow testing. The Potpourri section concludes the proceedings with reports on low-temperature resources, market analysis, brines, waste treatment biotechnology, and Bonneville Power Administration activities. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

Not Available

1993-10-01T23:59:59.000Z

386

Smooth Brome Monitoring at Rocky Flats-2005 Results | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Smooth Brome Monitoring at Rocky Flats-2005 Results Smooth Brome Monitoring at Rocky Flats-2005 Results Smooth Brome Monitoring at Rocky Flats-2005 Results Smooth Brome Monitoring...

387

DOE - Office of Legacy Management -- Rocky Flats External Resources  

Office of Legacy Management (LM)

Rocky Flats Stewardship Council Disclaimer Rocky Flats Cold War Museum Disclaimer U.S. Fish and Wildlife Service Rocky Flats National Wildlife Refuge Disclaimer Last Updated: 51...

388

A TECHNICAL, ECONOMIC AND ENVIRONMENTAL ASSESSMENT OF AMINE-BASED CO2 CAPTURE TECHNOLOGY FOR POWER PLANT GREENHOUSE GAS CONTROL  

Science Conference Proceedings (OSTI)

Capture and sequestration of CO{sub 2} from fossil fuel power plants is gaining widespread interest as a potential method of controlling greenhouse gas emissions. Performance and cost models of an amine (MEA)-based CO{sub 2} absorption system for post-combustion flue gas applications have been developed, and integrated with an existing power plant modeling framework that includes multi-pollutant control technologies for other regulated emissions. The integrated model has been applied to study the feasibility and cost of carbon capture and sequestration at both new and existing coal-burning power plants. The cost of carbon avoidance was shown to depend strongly on assumptions about the reference plant design, details of the CO{sub 2} capture system design, interactions with other pollution control systems, and method of CO{sub 2} storage. The CO{sub 2} avoidance cost for retrofit systems was found to be generally higher than for new plants, mainly because of the higher energy penalty resulting from less efficient heat integration, as well as site-specific difficulties typically encountered in retrofit applications. For all cases, a small reduction in CO{sub 2} capture cost was afforded by the SO{sub 2} emission trading credits generated by amine-based capture systems. Efforts are underway to model a broader suite of carbon capture and sequestration technologies for more comprehensive assessments in the context of multi-pollutant environmental management.

Edward S. Rubin; Anand B. Rao

2002-10-01T23:59:59.000Z

389

Environmental control technology for atmospheric carbon dioxide. Quarterly progress report No. 1, June 20, 1977--September 30, 1977  

DOE Green Energy (OSTI)

The primary objective of the subject program is to assess the potential options for controlling atmospheric CO/sub 2/. Accordingly, CO/sub 2/ control scenarios based on conventional technology and applied to the larger industrial emitters will be prepared. The studies will include preliminary cost estimates of selected processes, to identify fruitful areas for environmental control technology (ECT) programmatic development as related to CO/sub 2/ release control. BNL's prior experience in this area includes the development and evaluation of a number of processes for removing CO/sub 2/ from the atmosphere for the purpose of producing synthetic carbonaceous fuels including methanol, gasoline, and methane. Background information from other DOE programs will be used to determine the limitations for the control studies. This progress report presents background information on: (1) the concentration levels of CO/sub 2/ in the atmosphere during the last one hundred years; (2) the possible effects of rising CO/sub 2/ levels; (3) the impact of fossil fuel use in the United States on overall worldwide CO/sub 2/ emissions; (4) the impact of increased coal utilization on CO/sub 2/ emissions; and (5) process considerations for controlling CO/sub 2/.

Steinberg, M.; Albanese, A.S.; Dang, V.D.

1977-10-01T23:59:59.000Z

390

Technology assessment: environmental, health, and safety impacts associated with oil recovery from US tar-sand deposits  

SciTech Connect

The tar-sand resources of the US have the potential to yield as much as 36 billion barrels (bbls) of oil. The tar-sand petroleum-extraction technologies now being considered for commercialization in the United States include both surface (above ground) systems and in situ (underground) procedures. The surface systems currently receiving the most attention include: (1) thermal decomposition processes (retorting); (2) suspension methods (solvent extraction); and (3) washing techniques (water separation). Underground bitumen extraction techniques now being field tested are: (1) in situ combustion; and (2) in situ steam-injection procedures. At this time, any commercial tar-sand facility in the US will have to comply with at least 7 major federal regulations in addition to state regulations; building, electrical, and fire codes; and petroleum-industry construction standards. Pollution-control methods needed by tar-sand technologies to comply with regulatory standards and to protect air, land, and water quality will probably be similar to those already proposed for commercial oil-shale systems. The costs of these systems could range from about $1.20 to $2.45 per barrel of oil produced. Estimates of potential pollution-emisson levels affecting land, air, and water were calculated from available data related to current surface and in situ tar-sand field experiments in the US. These data were then extrapolated to determine pollutant levels expected from conceptual commercial surface and in situ facilities producing 20,000 bbl/d. The likelihood-of-occurrence of these impacts was then assessed. Experience from other industries, including information concerning health and ecosystem damage from air pollutants, measurements of ground-water transport of organic pollutants, and the effectiveness of environmental-control technologies was used to make this assessment.

Daniels, J.I.; Anspaugh, L.R.; Ricker, Y.E.

1981-10-13T23:59:59.000Z

391

Technolog  

NLE Websites -- All DOE Office Websites (Extended Search)

Research in Research in Science and Technolog y Sandia pushes frontiers of knowledge to meet the nation's needs, today and tomorrow Sandia National Laboratories' fundamental science and technology research leads to greater understanding of how and why things work and is intrinsic to technological advances. Basic research that challenges scientific assumptions enables the nation to push scientific boundaries. Innovations and breakthroughs produced at Sandia allow it to tackle critical issues, from maintaining the safety, security and effectiveness of the nation's nuclear weapons and preventing domestic and interna- tional terrorism to finding innovative clean energy solutions, develop- ing cutting-edge nanotechnology and moving the latest advances to the marketplace. Sandia's expertise includes:

392

DEEP VADOSE ZONE APPLIED FIELD RESEARCH CENTER: TRANSFORMATIONAL TECHNOLOGY DEVELOPMENT FOR ENVIRONMENTAL REMEDIATION  

SciTech Connect

DOE-EM, Office of Groundwater and Soil Remediation and DOE Richland, in collaboration with the Hanford site and Pacific Northwest National Laboratory, have established the Deep Vadose Zone Applied Field Research Center (DVZ-AFRC). The DVZ-AFRC leverages DOE investments in basic science from the Office of Science, applied research from DOE EM Office of Technology Innovation and Development, and site operation (e.g., site contractors [CH2M HILL Plateau Remediation Contractor and Washington River Protection Solutions], DOE-EM RL and ORP) in a collaborative effort to address the complex region of the deep vadose zone. Although the aim, goal, motivation, and contractual obligation of each organization is different, the integration of these activities into the framework of the DVZ-AFRC brings the resources and creativity of many to provide sites with viable alternative remedial strategies to current baseline approaches for persistent contaminants and deep vadose zone contamination. This cooperative strategy removes stove pipes, prevents duplication of efforts, maximizes resources, and facilitates development of the scientific foundation needed to make sound and defensible remedial decisions that will successfully meet the target cleanup goals for one of DOE EM's most intractable problems, in a manner that is acceptable by regulators.

Wellman, Dawn M.; Triplett, Mark B.; Freshley, Mark D.; Truex, Michael J.; Gephart, Roy E.; Johnson, Timothy C.; Chronister, Glen B.; Gerdes, Kurt D.; Chamberlain, Skip; Marble, Justin; Ramirez, Rosa

2011-02-27T23:59:59.000Z

393

WARP TM TECHNOLOGY FOR LOW COST & ENVIRONMENTALLY FRIENDLY MARINE BASED WIND POWER PLANTS  

E-Print Network (OSTI)

Major consideration and effort has gone into the selection of locations for wind power plants with relatively high wind speed which is relatively near the place of energy demand. The reason is that as wind speed increases, collectable energy from the wind increases by the third power. That is, in a location with 20 % higher wind speed, it is possible to generate 73 % more power. If 50 % higher wind velocity is available, 300 % more power and energy can be generated. The father of modern day wind power, William Heronemus, former US Nuclear Navy officer, Engineering Professor of the University of Massachusetts, recognized this and therefore proposed offshore wind power plants which helped launch the wind industry in 1972 with his landmark paper (Ref. 1). However, subsequent studies in the US and Europe found that proposed large diameter windmills in offshore installations are relatively uneconomic (Ref. 2, 3) due to a number of unavoidable characteristic features. Recently, Danish wind power firms are finding reasonably promising economic performance when such turbines are limited to very shallow water of 3-5 meters near land where no platform is required to support them (Ref. 4 & 5). However, ENECOs Wind Amplified Rotor Platform (WARP TM) technology when applied in spar buoy design configuration has exceptional features and benefits desired by an offshore wind power plant:

Dr. David; L. Rainey; Alfred L. Weisbrich

1998-01-01T23:59:59.000Z

394

Flat-Plate Photovoltaic Systems  

Energy.gov (U.S. Department of Energy (DOE))

The most common photovoltaic (PV) array design uses flat-plate PV modules or panels. These panels can be fixed in place or allowed to track the movement of the sun. They respond to sunlight that is direct or diffuse. Even in clear skies, the diffuse component of sunlight accounts for between 10% and 20% of the total solar radiation on a horizontal surface. On partly sunny days, up to 50% of that radiation is diffuse, and on cloudy days, 100% of the radiation is diffuse.

395

Albuquerque Operations Office, Albuquerque, New Mexico: Technology summary  

SciTech Connect

This document has been prepared by the Department of Energy`s (DOE) Environmental Management (EM) Office of Technology Development (OTD) in order to highlight research, development, demonstration, testing, and evaluation (RDDT&E) activities funded through the Albuquerque Operations Office. Technologies and processes described have the potential to enhance DOE`s cleanup and waste management efforts, as well as improve US industry`s competitiveness in global environmental markets. The information has been assembled from recently produced OTD documents that highlight technology development activities within each of the OTD program elements. These integrated program summaries include: Volatile Organic Compounds in Non-Arid Soils, Volatile Organic Compounds in Arid Soils, Mixed Waste Landfill Integrated Demonstration, Uranium in Soils Integrated Demonstration, Characterization, Monitoring, and Sensor Technology, In Situ Remediation, Buried Waste Integrated Demonstration, Underground Storage Tank, Efficient Separations and Processing, Mixed Waste Integrated Program, Rocky Flats Compliance Program, Pollution Prevention Program, Innovation Investment Area, and Robotics Technology.

Not Available

1994-08-01T23:59:59.000Z

396

DOE Certifies Rocky Flats Cleanup "Complete" | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Certifies Rocky Flats Cleanup "Complete" Certifies Rocky Flats Cleanup "Complete" DOE Certifies Rocky Flats Cleanup "Complete" December 8, 2005 - 4:45pm Addthis Golden, CO - Deputy Secretary of Energy Clay Sell announced today that the environmental cleanup of the former Rocky Flats site has been certified complete by the U.S. Department of Energy. Certification marks the final step in the DOE's successful effort to clean up and eventually turn over the former weapons production site for use as a National Wildlife Refuge. "With today's announcement, the cleanup chapter of Rocky Flats' history is closed, while another equally important chapter is just being opened," said Deputy Secretary Sell. "This successful cleanup represents a triumph of determination and spirit of cooperation that stands as an example for

397

Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Computers and the internet play an increasingly larger role in the lives of students. In this activity, students must use various web sites to locate specific pieces of...

398

Closing Rocky Flats by 2006  

Science Conference Proceedings (OSTI)

Safely accelerating the closure of Rocky Flats to 2006 is a goal shared by many: the State of Colorado, the communities surrounding the site, the U.S. Congress, the Department of Energy, Kaiser-Hill and its team of subcontractors, the site's employees, and taxpayers across the country. On June 30, 2000, Kaiser-Hill (KH) submitted to the Department of Energy (DOE), KH's plan to achieve closure of Rocky Flats by December 15, 2006, for a remaining cost of $3.96 billion (February 1, 2000, to December 15, 2006). The Closure Project Baseline (CPB) is the detailed project plan for accomplishing this ambitious closure goal. This paper will provide a status report on the progress being made toward the closure goal. This paper will: provide a summary of the closure contract completion criteria; give the current cost and schedule variance of the project and the status of key activities; detail important accomplishments of the past year; and discuss the challenges ahead.

Tuor, N. R.; Schubert, A. L.

2002-02-26T23:59:59.000Z

399

Baseline Environmental Analysis Report for the K-1251 Barge Facility at the East Tennessee Technology Park, Oak Ridge, Tennessee  

Science Conference Proceedings (OSTI)

This report documents the baseline environmental conditions of the U. S. Department of Energy's (DOE's) K-1251 Barge Facility, which is located at the East Tennessee Technology Park (ETTP). DOE is proposing to lease the facility to the Community Reuse Organization of East Tennessee (CROET). This report provides supporting information for the use, by a potential lessee, of government-owned facilities at ETTP. This report is based upon the requirements of Sect. 120(h) of the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA). The lease footprint is slightly over 1 acre. The majority of the lease footprint is defined by a perimeter fence that surrounds a gravel-covered area with a small concrete pad within it. Also included is a gravel drive with locked gates at each end that extends on the east side to South First Avenue, providing access to the facility. The facility is located along the Clinch River and an inlet of the river that forms its southern boundary. To the east, west, and north, the lease footprint is surrounded by DOE property. Preparation of this report included the review of government records, title documents, historic aerial photos, visual and physical inspections of the property and adjacent properties, and interviews with current and former employees involved in the operations on the real property to identify any areas on the property where hazardous substances and petroleum products or their derivatives and acutely hazardous wastes were known to have been released or disposed. Radiological surveys were conducted and chemical samples were collected to assess the facility's condition.

Van Winkle J.E.

2007-08-24T23:59:59.000Z

400

Available Technologies: Football Wrench  

Energy Efficiency; Energy Storage and Recovery; Renewable Energy; Environmental Technologies. Monitoring and Imaging; Remediation; Modeling; Imaging ...

Note: This page contains sample records for the topic "flats environmental technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Argonne TDC: Transportation Technologies  

Emergency Response. Engineering. Environmental Research. Fuel Cells. Imaging Technology. Material Science. Nanotechnology. Physical Sciences. Sensor ...

402

Argonne TDC: Engineering Technologies  

Emergency Response. Engineering. Environmental Research. Fuel Cells. Imaging Technology. Material Science. Nanotechnology. Physical Sciences. Sensor ...

403

Finding of No Significant Impact for the Environmental Assessment for the Proposed Consolidation and Expansion of Idaho National Laboratory Reseach and Development at a Science and Technology Campus  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FOR THE ENVIRONMENTAL FOR THE ENVIRONMENTAL ASSESSMENT FOR THE PROPOSED CONSOLIDATION AND EXPANSION OF IDAHO NATIONAL LABORATORY RESEARCH AND DEVELOPMENT AT A SCIENCE AND TECHNOLOGY CAMPUS Agency: U.S. Department of Energy (DOE) Action: Finding of No Significant Impact (FONSI) Summary: DOE prepared an Environmental Assessment (EA) for the Proposed Consolidation and Expansion of the Idaho National Laboratory Research and Development at a Science and Technology Campus (STC) (DOEIEA-1555). The proposed action consists of consolidating and expanding existing laboratory and business capabilities and operations within a single geographic area, or central campus. The proposed action would accommodate anticipated program growth while allowing for the consolidation of various activities located in the Idaho

404

Sagebrush Flat Wildlife Area 2008 Annual Report.  

Science Conference Proceedings (OSTI)

The Sagebrush Flat Wildlife Area is a 12,718 acre complex located in Douglas County, Washington. Four distinct management units make up the area: Bridgeport, Chester Butte, Dormaier and Sagebrush Flat. The four Units are located across a wide geographic area within Douglas County. The Units are situated roughly along a north/south line from Bridgeport in the north to the Douglas/Grant county line in the south, 60 miles away. The wildlife area was established to conserve and enhance shrubsteppe habitat for the benefit shrubsteppe obligate and dependent wildlife species. In particular, the Sagebrush Flat Wildlife Area is managed to promote the recovery of three state-listed species: Columbian sharp-tailed grouse (threatened), greater sage grouse (threatened) and the pygmy rabbit (endangered). The US Fish and Wildlife Service also list the pygmy rabbit as endangered. Wildlife area staff seeded 250 acres of old agricultural fields located on the Sagebrush Flat, Dormaier and Chester Butte units. This has been a three project to reestablish high quality shrubsteppe habitat on fields that had either been abandoned (Dormaier) or were dominated by non-native grasses. A mix of 17 native grasses and forbs, most of which were locally collected and grown, was used. First year maintenance included spot spraying Dalmatian toadflax on all sites and mowing annual weeds to reduce competition. Photo points were established and will be integral to long term monitoring and evaluation. Additional monitoring and evaluation will come from existing vegetation transects. This year weed control efforts included spot treatment of noxious weeds, particularly Dalmatian toadflax, in previously restored fields on the Bridgeport Unit (150 acres). Spot treatment also took place within fields scheduled for restoration (40 acres) and in areas where toadflax infestations are small and relatively easily contained. Where toadflax is so widespread that chemical treatment would be impractical, we use the bioagent Mecinus janthinus, available through Professor Gary Piper of Washington State University. This year we released 4,000 M. janthinus on the Bridgeport Unit at 6 separate locations. Since 2002 we have released approximately 14,400 of these insects, 80% of these on the Bridgeport Unit. Additional weed control activities included mowing and spot spraying more than 32 miles of roads, cutting and removal of annual weeds within fenced deer exclosures. We upgraded the solar powered irrigation system that supplies water to a stand of water birch trees planted in 2002. Wildlife area staff designed and built a new solar array and installed a higher capacity pump. The increased capacity will ensure that these trees receive adequate water through the hot summer months and allow us to create at least one additional stand. This project is an important part in our effort to expand the available winter habitat for sharp-tailed grouse on the Bridgeport Unit. Maintenance of fences, parking areas and roads continued during throughout the year. Two parking areas, at Chester Butte and Bridgeport, were graded and additional gravel added. Roads on the Bridgeport Unit were graded and repaired following spring runoff. Trespass and dumping issues have increased in recent years on the Bridgeport Unit. To address these problems we constructed four steel gates at access points on this unit. Each gate is tubular steel attached to 8-inch diameter steel posts, 10 feet long that are cemented into the ground. Two gates allow access to BPA substation facilities and power-line right-of ways so placement, construction and locking issues had to be coordinated with BPA's Real Estate staff in Spokane. Environmental Compliance Documentation issues were addressed again this year. This process has the potential to cause delays the completion of projects within the fiscal year. With this in mind and an eye toward the future, we requested that several projects planned for the coming years be surveyed this year. Beginning in August of 2007, area staff worked with BPA staff to identify work elements

Peterson, Dan [Washington Department of Fish and Wildlife

2008-11-03T23:59:59.000Z

405

Sagebrush Flat Wildlife Area 2008 Annual Report.  

DOE Green Energy (OSTI)

The Sagebrush Flat Wildlife Area is a 12,718 acre complex located in Douglas County, Washington. Four distinct management units make up the area: Bridgeport, Chester Butte, Dormaier and Sagebrush Flat. The four Units are located across a wide geographic area within Douglas County. The Units are situated roughly along a north/south line from Bridgeport in the north to the Douglas/Grant county line in the south, 60 miles away. The wildlife area was established to conserve and enhance shrubsteppe habitat for the benefit shrubsteppe obligate and dependent wildlife species. In particular, the Sagebrush Flat Wildlife Area is managed to promote the recovery of three state-listed species: Columbian sharp-tailed grouse (threatened), greater sage grouse (threatened) and the pygmy rabbit (endangered). The US Fish and Wildlife Service also list the pygmy rabbit as endangered. Wildlife area staff seeded 250 acres of old agricultural fields located on the Sagebrush Flat, Dormaier and Chester Butte units. This has been a three project to reestablish high quality shrubsteppe habitat on fields that had either been abandoned (Dormaier) or were dominated by non-native grasses. A mix of 17 native grasses and forbs, most of which were locally collected and grown, was used. First year maintenance included spot spraying Dalmatian toadflax on all sites and mowing annual weeds to reduce competition. Photo points were established and will be integral to long term monitoring and evaluation. Additional monitoring and evaluation will come from existing vegetation transects. This year weed control efforts included spot treatment of noxious weeds, particularly Dalmatian toadflax, in previously restored fields on the Bridgeport Unit (150 acres). Spot treatment also took place within fields scheduled for restoration (40 acres) and in areas where toadflax infestations are small and relatively easily contained. Where toadflax is so widespread that chemical treatment would be impractical, we use the bioagent Mecinus janthinus, available through Professor Gary Piper of Washington State University. This year we released 4,000 M. janthinus on the Bridgeport Unit at 6 separate locations. Since 2002 we have released approximately 14,400 of these insects, 80% of these on the Bridgeport Unit. Additional weed control activities included mowing and spot spraying more than 32 miles of roads, cutting and removal of annual weeds within fenced deer exclosures. We upgraded the solar powered irrigation system that supplies water to a stand of water birch trees planted in 2002. Wildlife area staff designed and built a new solar array and installed a higher capacity pump. The increased capacity will ensure that these trees receive adequate water through the hot summer months and allow us to create at least one additional stand. This project is an important part in our effort to expand the available winter habitat for sharp-tailed grouse on the Bridgeport Unit. Maintenance of fences, parking areas and roads continued during throughout the year. Two parking areas, at Chester Butte and Bridgeport, were graded and additional gravel added. Roads on the Bridgeport Unit were graded and repaired following spring runoff. Trespass and dumping issues have increased in recent years on the Bridgeport Unit. To address these problems we constructed four steel gates at access points on this unit. Each gate is tubular steel attached to 8-inch diameter steel posts, 10 feet long that are cemented into the ground. Two gates allow access to BPA substation facilities and power-line right-of ways so placement, construction and locking issues had to be coordinated with BPA's Real Estate staff in Spokane. Environmental Compliance Documentation issues were addressed again this year. This process has the potential to cause delays the completion of projects within the fiscal year. With this in mind and an eye toward the future, we requested that several projects planned for the coming years be surveyed this year. Beginning in August of 2007, area staff worked with BPA staff to identify work elements

Peterson, Dan [Washington Department of Fish and Wildlife

2008-11-03T23:59:59.000Z

406

Environmental Restoration/Waste Management - applied technology. Semiannual report, July 1992--June 1993, Volume 1, Number 2, and Volume 2, Number 1  

SciTech Connect

The Environmental Restoration/Waste Management-Applied Technology (ER/WM-AT) Program is developing restoration and waste treatment technologies needed for the ongoing environmental cleanup of the Department of Energy (DOE) complex and treatment technologies for wastes generated in the nuclear weapons production complex. These technologies can find application to similar problems nationally and even worldwide. They can be demonstrated at the Livermore site, which mirrors (on a small scale) many of the environmental and waste management problems of the rest of the DOE complex. Their commercialization should speed cleanup, and the scope of the task should make it attractive to US industry. The articles in this semi-annual report cover the following areas: ceramic final forms for residues of mixed waste treatment; treatment of wastes containing sodium nitrate; actinide volatility in thermal oxidation processes; in situ microbial filters for remediating contaminated soils; collaboration with scientists in the former Soviet Union on new ER/WM technologies; and fiber-optic sensors for chlorinated organic solvents.

Murphy, P.W.; Bruner, J.M.; Price, M.E.; Talaber, C.J. [eds.

1993-12-31T23:59:59.000Z

407

DOE - Office of Legacy Management -- Rocky Flats Archive  

NLE Websites -- All DOE Office Websites (Extended Search)

Archive Archive Rocky Flats Site, Colorado Key Document Archive All documents are Adobe Acrobat files. pdf_icon NEPA - Rocky Flats Surface Water Configuration Environmental Assessment (EA) Site-Specific Uranium Standards Petition Site Surveillance and Maintenance Reports Quarterly Reports 2013 3rd Quarter 2nd Quarter Overview 1st Quarter Overview 2012 3rd Quarter Overview 2nd Quarter Overview 1st Quarter Overview 2011 3rd Quarter Overview 2nd Quarter Overview 1st Quarter Overview 2010 3rd Ouarter Overview 2nd Ouarter Overview 1st Quarter Overview 2009 1st Quarter Overview 2nd Ouarter Overview 3rd Quarter Overview 2008 1st Quarter Overview 2nd Quarter Overview 3rd Quarter Overview 2007 1st Quarter Overview 2nd Quarter Overview 3rd Quarter Overview 2006

408

Health Surveillance Outcomes in Former Rocky Flats Radiation Workers  

NLE Websites -- All DOE Office Websites (Extended Search)

Surveillance of Rocky Flats Radiation Workers Surveillance of Rocky Flats Radiation Workers Janice P. Watkins 1 , Elizabeth D. Ellis 1 , F. Joseph Furman 2 , Roger B. Falk 2 , Joe M. Aldrich 2 , and Donna L. Cragle 1 ORAU Technical Report # 2006-0408 1 Oak Ridge Institute for Science and Education, Center for Epidemiologic Research; P.O. Box 117; Oak Ridge, TN 37831-0117 2 Oak Ridge Institute for Science and Education, Center for Epidemiologic Research; 9950 W. 80 th Avenue, Suite 17; Arvada, CO 80005-3914 This report was funded by Department of Energy Environmental Health Division under contract number DE-AC05-00OR22750. Table of Contents List of Figures.................................................................................................................2 List of Tables

409

Facility overview for commercial application of selected Rocky Flats facilities  

SciTech Connect

The purpose of this Facility Overview is to support the Rocky Flats Local Impacts Initiative`s Request for Interest, to solicit interest from commercial corporations for utilizing buildings 865 and 883, and the equipment contained within each building, for a commercial venture. In the following sections, this document describes the Rocky Flats Site, the buildings available for lease, the equipment within these buildings, the site services available to a tenant, the human resources available to support operations in buildings 865 and 883, and the environmental condition of the buildings and property. In addition, a brief description is provided of the work performed to date to explore the potential products that might be manufactured in Buildings 865 and 883, and the markets for these products.

NONE

1996-11-01T23:59:59.000Z

410

Audit Report "Department of Energy Efforts to Manage Information Technology Resources in an Energy-Efficient and Environmentally Responsible Manner"  

Science Conference Proceedings (OSTI)

The American Recovery and Reinvestment Act of 2009 emphasizes energy efficiency and conservation as critical to the Nation's economic vitality; its goal of reducing dependence on foreign energy sources; and, related efforts to improve the environment. The Act highlights the significant use of various forms of energy in the Federal sector and promotes efforts to improve the energy efficiency of Federal operations. One specific area of interest is the increasing demand for Federal sector computing resources and the corresponding increase in energy use, with both cost and environmental implications. The U.S. Environmental Protection Agency reported that, without aggressive conservation measures, data center energy consumption alone is expected to double over the next five years. In our report on Management of the Department's Data Centers at Contractor Sites (DOE/IG-0803, October 2008) we concluded that the Department of Energy had not always improved the efficiency of its contractor data centers even when such modifications were possible and practical. Despite its recognized energy conservation leadership role, the Department had not always taken advantage of opportunities to reduce energy consumption associated with its information technology resources. Nor, had it ensured that resources were managed in a way that minimized impact on the environment. In particular: (1) The seven Federal and contractor sites included in our review had not fully reduced energy consumption through implementation of power management settings on their desktop and laptop computers; and, as a consequence, spent $1.6 million more on energy costs than necessary in Fiscal Year 2008; (2) None of the sites reviewed had taken advantage of opportunities to reduce energy consumption, enhance cyber security, and reduce costs available through the use of techniques, such as 'thin-client computing' in their unclassified environments; and, (3) Sites had not always taken the necessary steps to reduce energy consumption and resource usage of their data centers, such as identifying and monitoring the amount of energy used at their facilities. We concluded that Headquarters programs offices (which are part of the Department of Energy's Common Operating Environment) as well as field sites had not developed and/or implemented policies and procedures necessary to ensure that information technology equipment and supporting infrastructure was operated in an energy-efficient manner and in a way that minimized impact on the environment. For example, although required by the Department, sites had not enabled computer equipment power management features designed to reduce energy consumption. In addition, officials within Headquarters programs and at the sites reviewed had not effectively monitored performance or taken steps to fully evaluate available reductions in energy usage at their facilities. Without improvements, the Department will not be able to take advantage of opportunities to reduce energy consumption and realize cost savings of nearly $23 million over the next five years at just the seven sites reviewed. We noted that the potential for reduced energy consumption at these sites alone was equivalent to the annual power requirements of over 2,400 homes or, alternatively, removing about 3,000 cars from the road each year. Many of the available energy reduction strategies, such as fully utilizing energy-efficient settings on the many computers used by the Department and its contractors, are 'low hanging fruit' in that they will provide immediate tangible energy savings at little or no cost. Others, such as a shift to thin-client computing, an environment that transfers the processing capabilities from an individual's desk to a shared server environment, will require some level of investment which can, based on available literature, be successfully recovered through reduced acquisition and support costs. In our judgment, given its highly visible leadership in energy issues, aggressive action should be taken to make the Department's information technology operati

None

2009-05-01T23:59:59.000Z

411

Environmentally Assisted Cracking: Nuclear  

Science Conference Proceedings (OSTI)

About this Symposium. Meeting, Materials Science & Technology 2014. Symposium, Environmentally Assisted Cracking: Nuclear. Sponsorship. Organizer(s)...

412

Environmental Technology Verification Program  

E-Print Network (OSTI)

,fallingobjects,misuseofequipment,ergonomic/repetitivemotioninjuries, slips, trips, falls, crushes, and cuts. · Explosionand Fire -- Ignition of petroleum products; methane of petroleum hydrocarbons. #12;6 Aerosols were measured with a real-time direct-reading particle meter Source Complex Model (ISCLT3).9 Meteorological dispersion of emissions vented from the warehouse

413

Environmental Energy Technologies Division  

NLE Websites -- All DOE Office Websites (Extended Search)

the private sector. Our staff of 500 represents a diverse cross section of fields and skills, ranging from architecture, physics, and mechanical engineering to economics and...

414

Environmental Energy Technologies Division  

NLE Websites -- All DOE Office Websites (Extended Search)

Brockett, Debbie Brodrick, Jim Bronk, Brian S Brook, Martha Brosha, Eric L Brostoff, Lynn B Brower, Michael Brown, Carrie Brown, Diane H Brown, Ian G Brown, Jason P Brown,...

415

Environmental Technologies Portal  

Science Conference Proceedings (OSTI)

... Projects. Reference Materials and Standards for Fossil Fuels, Electric Utility Emissions, and Coal Combustion By-Products ...

2012-12-27T23:59:59.000Z

416

Environmental Technologies News  

Science Conference Proceedings (OSTI)

... carbon dioxide and other "greenhouse gases" in the ... Software Tool Helps Evaluate Natural Cooling Options ... Secret Behind NIST's New Gas Detector ...

2010-10-20T23:59:59.000Z

417

Environmental Technology Verification Program  

E-Print Network (OSTI)

megawatt (MW) each, and units 5­9, rated at 200 MW each. Each of the nine power generating units operates/Subcontractors Chuck Dene Electric Power Research Institute 3412 Hillview Avenue Palo Alto, CA 94304-1395 Rabon Johnson. The performance of this test is being funded in part by the Electric Power Research Institute. A 90-day period

418

Rocky Flats 10 year plan: over 500 structures to be demolished  

Science Conference Proceedings (OSTI)

Rocky Flats Environmental Technology Site has prepared a Ten Year Plan (Plan) that demonstrates how the Site would achieve accelerated cleanup and rapidly reduce the risks the Site currently poses to its workers, the public, and the environment. A major element of the Plan is the decontamination and demolition of over 500 Site facilities, including all of the former nuclear production facilities, by the end of 2006. Facilities used for the storage of plutonium, treatment of low-level mixed waste, and several office building would remain until the plutonium is removed or there is no longer a need for the facility, in which case it would be demolished. While the Plan considers all aspects of the cleanup and closure, this paper focuses on the challenges posed by the removal of highly contaminated equipment and the demolition of structures. This paper describes near- term decommissioning projects as well as the long range plans and budgets. Cash flow ultimately controls schedule, and sharing of budget priorities among processing of special nuclear material, disposing of waste, and cleaning up the environment has to be juggled carefully to attain the goals of the Plan. The total cost of the Plan exceeds $5 billion, and over $1 billion will be spent on decommissioning activities. Following removal of the plutonium and the demolition of the plutonium storage and remaining Site facilities by the end of 2015, the cost to perform the long-term environmental monitoring at the Site is estimated to be $10 million per year.

Evans, B. [Kaiser-Hill L.L.C., Rocky Flats, CO (United States); Bengel, P. [Rocky Mountain Remediation Services, L.L.C., Rocky Flats, CO (United States)

1997-03-01T23:59:59.000Z

419

Idaho National Laboratory - Technology Transfer - Technologies ...  

Idaho National Laboratory Technologies Available for Licensing ... Environmental Flow-Through Reactor for the In Situ Assessment of Remediation Technologies in Vadose ...

420

Examination of the factors and issues for an environmental technology utilization partnership between the private sector and the Department of Energy. Final report  

SciTech Connect

The Department of Energy (DOE) held a meeting on November 12, 1992 to evaluate the DOE relations with industry and university partners concerning environmental technology utilization. The goal of this meeting was to receive feedback from DOE industry and university partners for the identification of opportunities to improve the DOE cooperative work processes with the private sector. The meeting was designed to collect information and to turn that information into action to improve private sector partnerships with DOE.

Brouse, P.

1997-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "flats environmental technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

PURPA and Superconducting Magnetic Energy Storage: Energy Conservation, Environmental Protection and Entrepreneurial Opportunity in the Next Technological Revolution  

E-Print Network (OSTI)

SUPERCONDUCTING MAGNETIC ENERGY STORAGE Corp. ,60 the Unitednational defense, 7 energy storage and environmental protec-and accompanying text. 8. Energy storage and the resulting

Bovett, Robert E.

1988-01-01T23:59:59.000Z

422

Idaho National Laboratory - Technology Transfer - Technologies ...  

Idaho National Laboratory Technologies Available for Licensing ... Environmental Method and Apparatus Configured for Identification of a Material

423

Rocky Flats ash test procedure (sludge stabilization)  

SciTech Connect

Rocky Flats Ash items have been identified as the next set of materials to be stabilized. This test is being run to determine charge sizes and soak times to completely stabilize the Rocky Flats Ash items. The information gathered will be used to generate the heating rampup cycle for stabilization. This test will also gain information on the effects of the glovebox atmosphere (moisture) on the stabilized material. This document provides instructions for testing Rocky Flats Ash in the HC-21C muffle furnace process.

Winstead, M.L.

1995-09-14T23:59:59.000Z

424

Waste Not, Want Not: Analyzing the Economic and Environmental Viability of Waste-to-Energy (WTE) Technology for Site-Specific Optimization of Renewable Energy Options  

Science Conference Proceedings (OSTI)

Waste-to-energy (WTE) technology burns municipal solid waste (MSW) in an environmentally safe combustion system to generate electricity, provide district heat, and reduce the need for landfill disposal. While this technology has gained acceptance in Europe, it has yet to be commonly recognized as an option in the United States. Section 1 of this report provides an overview of WTE as a renewable energy technology and describes a high-level model developed to assess the feasibility of WTE at a site. Section 2 reviews results from previous life cycle assessment (LCA) studies of WTE, and then uses an LCA inventory tool to perform a screening-level analysis of cost, net energy production, greenhouse gas (GHG) emissions, and conventional air pollution impacts of WTE for residual MSW in Boulder, Colorado. Section 3 of this report describes the federal regulations that govern the permitting, monitoring, and operating practices of MSW combustors and provides emissions limits for WTE projects.

Funk, K.; Milford, J.; Simpkins, T.

2013-02-01T23:59:59.000Z

425

Flat-Plate Photovoltaic Systems | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Flat-Plate Photovoltaic Systems Flat-Plate Photovoltaic Systems August 20, 2013 - 4:03pm Addthis The most common photovoltaic (PV) array design uses flat-plate PV modules or...

426

Photo of the Week: Rocky Flats Wildlife Refuge | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Rocky Flats Wildlife Refuge Photo of the Week: Rocky Flats Wildlife Refuge December 21, 2012 - 11:27am Addthis The Rocky Flats Plant was first established in 1951 as a nuclear...

427

Environmental Management Waste Management Facility Waste Lot Profile 155.5 for K-1015-A Laundry Pit, East Tennessee Technology Park Oak Ridge, Tennessee  

DOE Green Energy (OSTI)

In 1989, the Oak Ridge Reservation (ORR), which includes the East Tennessee Technology Park (ETTP), was placed on the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA) National Priorities List. The Federal Facility Agreement (FFA) (DOE 1992), effective January 1, 1992, now governs environmental restoration activities conducted under CERCLA at the ORR. Following signing of the FFA, U.S. Department of Energy (DOE), U.S. Environmental Protection Agency (EPA), and the state of Tennessee signed the Oak Ridge Accelerated Cleanup Plan Agreement on June 18, 2003. The purpose of this agreement is to define a streamlined decision-making process to facilitate the accelerated implementation of cleanup, to resolve ORR milestone issues, and to establish future actions necessary to complete the accelerated cleanup plan by the end of fiscal year 2008. While the FFA continues to serve as the overall regulatory framework for remediation, the Accelerated Cleanup Plan Agreement supplements existing requirements to streamline the decision-making process. The disposal of the K-1015 Laundry Pit waste will be executed in accordance with the 'Record of Decision for Soil, Buried Waste, and Subsurface Structure Actions in Zone, 2, East Tennessee Technology Park, Oak Ridge, Tennessee' (DOB/ORAH-2161&D2) and the 'Waste Handling Plan for the Consolidated Soil and Waste Sites with Zone 2, East Tennessee Technology Park, Oak Ridge, Tennessee' (DOE/OR/01-2328&D1). This waste lot consists of a total of approximately 50 cubic yards of waste that will be disposed at the Environmental Management Waste Management Facility (EMWMF) as non-containerized waste. This material will be sent to the EMWMF in dump trucks. This profile is for the K-1015-A Laundry Pit and includes debris (e.g., concrete, metal rebar, pipe), incidental soil, plastic and wood, and secondary waste (such as plastic sheeting, hay bales and other erosion control materials, wooden pallets, contaminated equipment, decontamination materials, etc.).

Bechtel Jacobs, Raymer J.E.

2008-06-12T23:59:59.000Z

428

Chestnut Flats Wind Farm | Open Energy Information  

Open Energy Info (EERE)

Chestnut Flats Wind Farm Chestnut Flats Wind Farm Jump to: navigation, search Name Chestnut Flats Wind Farm Facility Chestnut Flats Wind Farm Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner EnXco Developer Gamesa Energy Energy Purchaser Delmarva Power Location Logan Township PA Coordinates 40.357314°, -78.594482° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":40.357314,"lon":-78.594482,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

429

NPP Boreal Forest: Canal Flats, Canada  

NLE Websites -- All DOE Office Websites (Extended Search)

Canal Flats, Canada, 1984 Canal Flats, Canada, 1984 Data Citation Cite this data set as follows: Comeau, P. G., and J. P. Kimmins. 1999. NPP Boreal Forest: Canal Flats, Canada, 1984. Data set. Available on-line [http://www.daac.ornl.gov] from Oak Ridge National Laboratory Distributed Active Archive Center, Oak Ridge, Tennessee, U.S.A. Description Above and below-ground biomass and productivity of four lodgepole pine stands (Pinus contorta var. latifolia) were determined near Canal Flats, Canada, during the 1984 growing season. Two stands growing on xeric sites and two stands growing on mesic sites were studied to determine the influence of soil water content on resource allocation to above-ground versus below-ground plant components. The stands were 70-78 years old, unmanaged, and had regenerated naturally following wildfire.

430

Shepherds Flat Central | Open Energy Information  

Open Energy Info (EERE)

Shepherds Flat Central Shepherds Flat Central Jump to: navigation, search Name Shepherds Flat Central Facility Shepherds Flat Central Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner Caithness Developer Caithness Energy Purchaser Southern California Edison Co Location Gilliam and Morrow Counties OR Coordinates 45.655°, -120.056° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":45.655,"lon":-120.056,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

431

Flat Ridge 2 Expansion | Open Energy Information  

Open Energy Info (EERE)

Flat Ridge 2 Expansion Flat Ridge 2 Expansion Jump to: navigation, search Name Flat Ridge 2 Expansion Facility Flat Ridge 2 Expansion Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner BP Wind Energy Developer BP Wind Energy Energy Purchaser Arkansas Electric Cooperative Corp Location Sharon KS Coordinates 37.383239°, -98.334088° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":37.383239,"lon":-98.334088,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

432

The Lidars in Flat Terrain (LIFT) Experiment  

Science Conference Proceedings (OSTI)

The authors describe and present early results from the July_August 1996 Lidars in Flat Terrain (LIFT) experiment. LIFT was a boundary layer experiment that made use of recently developed Doppler, aerosol backscatter, and ozone lidars, along with ...

Stephen A. Cohn; Shane D. Mayor; Christian J. Grund; Tammy M. Weckwerth; Christoph Senff

1998-07-01T23:59:59.000Z

433

Long-Term Surveillance and Maintenance at Rocky Flats: Early...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

at Rocky Flats: Early Experiences and Lessons Learned Long-Term Surveillance and Maintenance at Rocky Flats: Early Experiences and Lessons Learned Long-Term Surveillance and...

434

Vascular Flora of the Rocky Flats Area, Jefferson County, Colorado...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Vascular Flora of the Rocky Flats Area, Jefferson County, Colorado, USA Vascular Flora of the Rocky Flats Area, Jefferson County, Colorado, USA August 2010 Jody K. Nelson Vascular...

435

DOE's Former Rocky Flats Weapons Production Site to Become National...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Former Rocky Flats Weapons Production Site to Become National Wildlife Refuge DOE's Former Rocky Flats Weapons Production Site to Become National Wildlife Refuge July 12, 2007 -...

436

Rocky Flats, Former Production Workers Screening Projects | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Flats, Former Production Workers Screening Projects Rocky Flats, Former Production Workers Screening Projects Project Name: National Supplemental Screening Program Covered DOE...

437

SLIDESHOW: Shepherds Flat Wind Farm | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Marketing Administration Other Agencies You are here Home SLIDESHOW: Shepherds Flat Wind Farm SLIDESHOW: Shepherds Flat Wind Farm Addthis 1 of 5 Image: Caithness Energy 1 of...

438

Environmental assessment, finding of no significant impact, and response to comments. Radioactive waste storage  

Science Conference Proceedings (OSTI)

The Department of Energy`s (DOE) Rocky Flats Environmental Technology Site (the Site), formerly known as the Rocky Flats Plant, has generated radioactive, hazardous, and mixed waste (waste with both radioactive and hazardous constituents) since it began operations in 1952. Such wastes were the byproducts of the Site`s original mission to produce nuclear weapons components. Since 1989, when weapons component production ceased, waste has been generated as a result of the Site`s new mission of environmental restoration and deactivation, decontamination and decommissioning (D&D) of buildings. It is anticipated that the existing onsite waste storage capacity, which meets the criteria for low-level waste (LL), low-level mixed waste (LLM), transuranic (TRU) waste, and TRU mixed waste (TRUM) would be completely filled in early 1997. At that time, either waste generating activities must cease, waste must be shipped offsite, or new waste storage capacity must be developed.

NONE

1996-04-01T23:59:59.000Z

439

Amendment to a Record of Decision for the Management of Certain Plutonium Residues and Scrub Alloy Stored at the Rocky Flats Environmental Technology Site, DOE/EIS-0277 (09/01/99)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

780 780 Federal Register / Vol. 64, No. 169 / Wednesday, September 1, 1999 / Notices attend the pre-application meeting in person. Assistance to Individuals With Disabilities at the Public Meeting: The meeting site is accessible to individuals with disabilities. If you will need an auxiliary aid or service to participate in the meeting (e.g., interpreting service, assistive listening device, or materials in an alternate format), notify the contact person listed below at least two weeks before the scheduled meeting date. Although we will attempt to meet a request we receive after that date, we may not be able to make available the requested auxiliary aid or service because of insufficient time to arrange it. Applicable Regulations: (a) The Education Department General Administrative Regulations (EDGAR),

440

Amended Record of Decision for the Management of Certain Plutonium Residues and Scrub Alloy Stored at the Rocky Flats Environmental Technology Site (DOE/EIS-0277) (1/28/01)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Federal Register / Vol. 66, No. 12 / Thursday, January 18, 2001 / Notices 5. National Association of Nurse Practitioners in Women's Health, Council on Accreditation. 6. Transnational Association of Christian Colleges and Schools, Accreditation Commission. State Agencies Recognized for the Approval of Public Postsecondary Vocational Education Interim Report 1. Kansas Board of Regents. Federal Agency Seeking Degree- Granting Authority In accordance with the Federal policy governing the granting of academic degrees by Federal agencies (approved by a letter from the Director, Bureau of the Budget, to the Secretary, Health, Education, and Welfare, dated December 23, 1954), the Secretary is required to establish a review committee to advise the Secretary concerning any legislation that may be proposed that

Note: This page contains sample records for the topic "flats environmental technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Second Record of Decision on Management of Certain Plutonium Residues and Scrub Alloy Stored at the Rocky Flats Environmental Technology Site (DOE/EIS-0277) (2/18/99)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

68 68 Federal Register / Vol. 64, No. 32 / Thursday, February 18, 1999 / Notices Code of Ethical Angling and asked NMFS to simultaneously address corrective habitat matters with sportfishing regulations. Response: The Sustainable Fisheries Act of 1996 requires the identification of essential fish habitat in federal fishery management plans. The following Code of Angling Ethics has been adopted by NMFS: THE CODE OF ANGLING ETHICS 1. Promotes, through education and practice, ethical behavior in the use of aquatic resources. 2. Values and respects the aquatic environment and all living things in it. 3. Avoids spilling, and never dumps, any pollutants, such as gasoline and oil, into the aquatic environment. 4. Disposes of all trash, including worn-out lines, leaders, and hooks, in

442

Green Purchasing & Green Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

Purchasing & Technology Goals 6 & 7: Green Purchasing & Green Technology Our goal is to purchase and use environmentally sustainable products whenever possible and to implement...

443

Inexpensive, Environmentally Friendly and High Permeable Lignin ...  

home \\ technologies \\ lignin based ion exchangers. Technologies: Ready-to-Sign Licenses: Software: Patents: Inexpensive, Environmentally Friendly and High Permeable ...

444

Available Technologies: Improved Xylan Extraction  

Energy Storage and Recovery; Renewable Energy; Environmental Technologies. Monitoring and Imaging; Remediation; Modeling; Imaging & Lasers.

445

Argonne TDC: Licensable Battery Technologies  

Emergency Response. Engineering. Environmental Research. Fuel Cells. Imaging Technology. Material Science. Nanotechnology. Physical Sciences. Sensor ...

446

Argonne TDC: Fuel Cell Technologies  

Emergency Response. Engineering. Environmental Research. Fuel Cells. Imaging Technology. Material Science. Nanotechnology. Physical Sciences. Sensor ...

447

Argonne TDC: Imaging Technology Portfolios  

Emergency Response. Engineering. Environmental Research. Fuel Cells. Imaging Technology. Material Science. Nanotechnology. Physical Sciences. Sensor ...

448

DOE/EA=O995 Final ENVIRONMENTAL ASSESSMENT  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE/EA=O995 DOE/EA=O995 Final ENVIRONMENTAL ASSESSMENT and FINDING-OF-NO-SIGNIFIC ANT-IMPACT Drum Storage Facility for Interim Storage of Materials Generated by Environmental Restoration Operations United States Department of Energy Rocky Flats Environmental Technology Site Golden, Colorado September 1994 DISCLAIMER This report was .prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, make any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned

449

Flat Water Wind Farm | Open Energy Information  

Open Energy Info (EERE)

Flat Water Wind Farm Flat Water Wind Farm Jump to: navigation, search Name Flat Water Wind Farm Facility Flat Water Wind Farm Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner Gestamp Wind North America Developer Flat Water Wind Farm Energy Purchaser Omaha Public Power District Location Richardson County NE Coordinates 40.001077°, -95.955119° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":40.001077,"lon":-95.955119,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

450

Conformally flat spacetimes and Weyl frames  

E-Print Network (OSTI)

We discuss the concepts of Weyl and Riemann frames in the context of metric theories of gravity and state the fact that they are completely equivalent as far as geodesic motion is concerned. We apply this result to conformally flat spacetimes and show that a new picture arises when a Riemannian spacetime is taken by means of geometrical gauge transformations into a Minkowskian flat spacetime. We find out that in the Weyl frame gravity is described by a scalar field. We give some examples of how conformally flat spacetime configurations look when viewed from the standpoint of a Weyl frame. We show that in the non-relativistic and weak field regime the Weyl scalar field may be identified with the Newtonian gravitational potential. We suggest an equation for the scalar field by varying the Einstein-Hilbert action restricted to the class of conformally-flat spacetimes. We revisit Einstein and Fokker's interpretation of Nordstr\\"om scalar gravity theory and draw an analogy between this approach and the Weyl gauge formalism. We briefly take a look at two-dimensional gravity as viewed in the Weyl frame and address the question of quantizing a conformally flat spacetime by going to the Weyl frame.

C. Romero; J. B. Fonseca-Neto; M. L. Pucheu

2011-01-27T23:59:59.000Z

451

The effects of technological change, experience and environmental regulation on the construction of coal-burning generating units  

E-Print Network (OSTI)

This paper provides an empirical analysis of the technological, regulatory and organizational factors that have influenced the costs of building coal-burning steam-electric generating units over the past twenty year. We ...

Joskow, Paul L.

1984-01-01T23:59:59.000Z

452

Bioenergy Technologies Office: Sustainability  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Overview Financial Opportunities Publications Contact Us Sustainability The Bioenergy Technologies Office's activities are guided by a commitment to environmental, economic,...

453