Sample records for flat panel display

  1. Flat or curved thin optical display panel

    DOE Patents [OSTI]

    Veligdan, J.T.

    1995-01-10T23:59:59.000Z

    An optical panel includes a plurality of waveguides stacked together, with each waveguide having a first end and an opposite second end. The first ends collectively define a first face, and the second ends collectively define a second face of the panel. The second face is disposed at an acute face angle relative to the waveguides to provide a panel which is relatively thin compared to the height of the second face. In an exemplary embodiment for use in a projection TV, the first face is substantially smaller in height than the second face and receives a TV image, with the second face defining a screen for viewing the image enlarged. 7 figures.

  2. Diffractive optics for compact flat panel displays. Final report

    SciTech Connect (OSTI)

    Sweeney, D.; DeLong, K.

    1997-04-29T23:59:59.000Z

    Three years ago LLNL developed a practical method to dramatically reduce the chromatic aberration in single element diffractive imaging lenses. High efficiency, achromatic imaging lenses have been fabricated for human vision correction. This LDRD supported research in applying our new methods to develop a unique, diffraction-based optical interface with solid state, microelectronic imaging devices. Advances in microelectronics have led to smaller, more efficient components for optical systems. There have, however, been no equivalent advances in the imaging optics associated with these devices. The goal of this project was to replace the bulky, refractive optics in typical head-mounted displays with micro-thin diffractive optics to directly image flat-panel displays into the eye. To visualize the system think of the lenses of someone`s eyeglasses becoming flat-panel displays. To realize this embodiment, we needed to solve the problems of large chromatic aberrations and low efficiency that are associated with diffraction. We have developed a graceful tradeoff between chromatic aberrations and the diffractive optic thickness. It turns out that by doubling the thickness of a micro-thin diffractive lens we obtain nearly a two-times improvement in chromatic performance. Since the human eye will tolerate one diopter of chromatic aberration, we are able to achieve an achromatic image with a diffractive lens that is only 20 microns thick, versus 3 mm thickness for the comparable refractive lens. Molds for the diffractive lenses are diamond turned with sub-micron accuracy; the final lenses are cast from these molds using various polymers. We thus retain both the micro- thin nature of the diffractive optics and the achromatic image quality of refractive optics. During the first year of funding we successfully extended our earlier technology from 1 cm diameter optics required for vision applications up to the 5 cm diameter optics required for this application. 3 refs., 6 figs.

  3. Improving the diversity of manufacturing electroluminescent flat panel displays

    SciTech Connect (OSTI)

    Moss, T.S.; Samuels, J.A.; Smith, D.C. [and others

    1995-09-01T23:59:59.000Z

    Crystalline calcium thiogallate with a cerium dopant has been deposited by metal-organic chemical vapor deposition (MOCVD) at temperatures below 600{degrees}C on a low cost glass substrate. An EL luminance of 1.05 fL was observed 40 volts above threshold at 60 Hz. This is more than an order of magnitude improvement over earlier crystalline-as-deposited thiogallate materials. These results pave the way for the use of MOCVD as a potential method for processing full color thin-film electroluminescent (TFEL) flat panel displays. The formation of the CaGa{sub 2}S{sub 4}:Ce phosphor requires precise control over a number of deposition parameters including flow rates, substrate temperature, and reactor pressure. The influence of these parameters will be discussed in terms of structure, uniformity, and TFEL device performance.

  4. Flat panel display using Ti-Cr-Al-O thin film

    DOE Patents [OSTI]

    Jankowski, Alan F. (Livermore, CA); Schmid, Anthony P. (Solan Beach, CA)

    2002-01-01T23:59:59.000Z

    Thin films of Ti--Cr--Al--O are used as a resistor material. The films are rf sputter deposited from ceramic targets using a reactive working gas mixture of Ar and O.sub.2. Resistivity values from 10.sup.4 to 10.sup.10 Ohm-cm have been measured for Ti--Cr--Al--O film <1 .mu.m thick. The film resistivity can be discretely selected through control of the target composition and the deposition parameters. The application of Ti--Cr--Al--O as a thin film resistor has been found to be thermodynamically stable, unlike other metal-oxide films. The Ti--Cr--Al--O film can be used as a vertical or lateral resistor, for example, as a layer beneath a field emission cathode in a flat panel display; or used to control surface emissivity, for example, as a coating on an insulating material such as vertical wall supports in flat panel displays.

  5. Process design and emission properties of gated n polycrystalline silicon field emitter arrays for flat-panel display applications

    E-Print Network [OSTI]

    Lee, Jong Duk

    poly-Si field emitter technology on an insulating substrate such as a glass panel, because each cathode for flat-panel display applications Hyung Soo Uh Inter-University Semiconductor Research Center and School of 1.2 m under the vacuum pressure of 3 10 9 Torr. The same anode current was obtained at 80 V from c

  6. The ImmersaDesk3 -Experiences With A Flat Panel Display for Virtual Reality

    E-Print Network [OSTI]

    Johnson, Andrew

    crystal, #12;ferro-electric liquid crystal, plasma panel, and light emitting diode displays. In our, they are presently only available in developer kits. Light Emitting Diode displays are bright and potentially

  7. Multi-cusp ion source for doping process of flat panel display manufacturing

    SciTech Connect (OSTI)

    Inouchi, Yutaka, E-mail: inouchi-yutaka@nissin.co.jp; Matsumoto, Takeshi; Dohi, Shojiro; Tanii, Masahiro; Takahashi, Genki; Nishimura, Ippei; Tatemichi, Junichi; Konishi, Masashi; Naito, Masao [FPD Machine Business Center, Nissin Ion Equipment Co., Ltd., Shiga 528-0068 (Japan)] [FPD Machine Business Center, Nissin Ion Equipment Co., Ltd., Shiga 528-0068 (Japan)

    2014-02-15T23:59:59.000Z

    We developed a multi-cusp ion source for Nissin ion doping system iG5 which is used in low temperature poly-crystalline silicon processes for flat panel display (FPD) manufacturing. In this ion source, BF{sub 3} or PH{sub 3} diluted H{sub 2} plasmas are produced and large area ribbon ion beams are extracted. In general, ion ratio of B{sup +} in BF{sub 3} plasma is much smaller than BF{sub 2}{sup +} in multi-cusp ion sources. We developed a new method to increase B{sup +} ratio and obtained mass analyzed B{sup +} target current of 130 mA. We employed newly improved multi-slot type electrodes for the beam extraction system and obtained stable beams with the uniformity of below 3%. In BF{sub 3} plasmas, several undesirable metal fluorides are produced in the plasma chamber and deposited on the electrode system, which cause glitches and poor beam uniformity. We introduce several cleaning methods.

  8. Amorphous Diamond Flat Panel Displays - Final Report of ER-LTR CRADA project with SI Diamond Technology

    SciTech Connect (OSTI)

    Ager III, Joel W.

    1998-05-08T23:59:59.000Z

    The objective of this project was to determine why diamond-based films are unusually efficient electron emitters (field emission cathodes) at room temperature. Efficient cathodes based on diamond are being developed by SI Diamond Technology (SIDT) as components for bright, sunlight-readable, flat panel displays. When the project started, it was known that only a small fraction (<1%) of the cathode area is active in electron emission and that the emission sites themselves are sub-micron in size. The critical challenge of this project was to develop new microcharacterization methods capable of examining known emission sites. The research team used a combination of cathode emission imaging (developed at SIDT), micro-Raman spectroscopy (LBNL), and electron microscopy and spectroscopy (National Center for Electron Microscopy, LBNL) to examine the properties of known emission sites. The most significant accomplishment of the project was the development at LBNL of a very high resolution scanning probe that, for the first time, measured simultaneously the topography and electrical characteristics of single emission sites. The increased understanding of the emission mechanism helped SIDT to develop a new cathode material,''nano-diamond,'' which they have incorporated into their Field Emission Picture Element (FEPix) product. SIDT is developing large-format flat panel displays based on these picture elements that will be brighter and more efficient than existing outdoor displays such as Jumbotrons. The energy saving that will be realized if field emission displays are introduced commercially is in line with the energy conservation mission of DOE. The unique characterization tools developed in this project (particularly the new scanning microscopy method) are being used in ongoing BES-funded basic research.

  9. Luminescent studies of fluorescent chromophore-doped silica aerogels for flat panel display applications

    SciTech Connect (OSTI)

    Glauser, S.A.C. [California Univ., Davis, CA (United States). Dept. of Applied Science; Lee, H.W.H. [Lawrence Livermore National Lab., CA (United States)

    1997-04-01T23:59:59.000Z

    The remarkable optical and electronic properties of doped and undoped silica aerogels establish their utility as unique, mulitfunctional host materials for fluorescent dyes and other luminescent materials for display and imaging applications. We present results on the photoluminescence, absorption, and photoluminescence excitation spectra of undoped silica aerogels and aerogels doped with Er{sup 3+}, rhodamine 6G (R6G), and fluorescein. 4 refs., 12 figs.

  10. IBM's New Flat Panel Displays

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh School footballHydrogen andHypernuclei in Hall CInby J. Stöhr (SSRL),

  11. amorphous selenium flat-panel: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and organic Heikenfeld, Jason 12 Asymmetric electrical properties of fork a-Si:H thin-film transistor and its application to flat panel displays Mathematics Websites Summary:...

  12. amorphous silicon flat-panel: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 Asymmetric Electrical Properties of Half Corbino Hydrogenated Amorphous Silicon Thin-Film Transistor and Its Applications to Flat Panel Displays Materials Science...

  13. A comparison of workstation dimensions and body postures between 17" CRT, 21" CRT, and 19" flat panel monitors

    E-Print Network [OSTI]

    Walline, Erin Kurusz

    1999-01-01T23:59:59.000Z

    Use of visual display terminals has been implicated as a risk factor in visual discomfort. With the progression of new technology, larger CRT monitors and alternate display technologies, such as flat panels, are entering the office environment. Few...

  14. Assessment of the impact of large CRTs and flat panel monitors on productivity and quality in an insurance company 

    E-Print Network [OSTI]

    Johnson, Michael Federico

    2006-04-12T23:59:59.000Z

    This field study evaluates the impact of replacing existing 17-inch Cathode Ray Tube (CRT) monitors with 19 and 21-inch CRT monitors and 18.1-inch Flat Panel Displays (FPDs) on matrices of productivity, visual comfort, and ...

  15. Electromagnetic Eavesdropping Risks of Flat-Panel Displays

    E-Print Network [OSTI]

    Kuhn, Markus

    such compromising em- anations with directional antennas and wideband receivers. Periodic av- eraging can lift be reconstructed at a distance using a TV set whose sync pulse generators are replaced with manually controlled

  16. ac-plasma display panel: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Websites Summary: crystal, 12;ferro-electric liquid crystal, plasma panel, and light emitting diode displays. In our, they are presently only available in developer kits. Light...

  17. Leaching assessments of toxic metals in waste plasma display panel glass.

    E-Print Network [OSTI]

    Chen, M; Jiang, P; Chen, H; Ogunseitan, OA; Li, Y

    2015-01-01T23:59:59.000Z

    of waste cathode-ray tube glass. Waste Manage. 26:1468–76.leachability from waste PDP glass in order to determinewaste plasma display panel glass ab a a b a Mengjun Chen ,

  18. Precise Application of Transparent Conductive Oxide Coatings for Flat Panel

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible forPortsmouth/Paducah ProjectPRE-AWARD ACCOUNTING SYSTEM SURVEY Applicant:InsideDisplays

  19. System design and implementation for the glass panel alignment and sealing tool for flat panel displays

    SciTech Connect (OSTI)

    Jordan, J.D.; Stromberg, P.G.; Kuszmaul, S.S.

    1996-10-16T23:59:59.000Z

    This report describes the system designed and fabricated for the National Center for Advanced Information Component Manufacturing (NCAICM) project number 9322-135. The system is a device capable of simultaneously aligning two glass plates and sealing them together with glass frit. The process development was divided into two phases. The first was thermal sealing in an ambient environment. The second was sealing a controlled environment in a vacuum.

  20. A comparison of nuclear reactor control room display panels 

    E-Print Network [OSTI]

    Bowers, Frances Renae

    1988-01-01T23:59:59.000Z

    . Evaluation Procedure 14 15 16 17 28 Analysis. 35 III RESULTS. 37 Discussion. 43 IV CONCLUSIONS AND RECOMMENDATIONS Recommendations REFERENCES 50 51 54 APPENDIX A: REACTOR OPERATOR INFORMATION PACKAGE. . . . . 57 APPENDIX B: AGN-201 STANDARD... related to human factors included poor training, inaccessibility or unavailability of pertinent information, copious amounts of unusable information and obscured displays. Since the Three Mile Island (TMI) accident, the U. S. Nuclear Regulatory...

  1. A microprocessor driven liquid crystal graphics display for aircraft use

    E-Print Network [OSTI]

    Marzke, Lee Howard

    1984-01-01T23:59:59.000Z

    A complete graphics system for use in modular avionics is built around a liquid crystal flat panel display. Screen refresh is handled by display controller that provides a bit mapped representation of the display in RAM. ...

  2. Hysterosalpingography using a flat panel unit: Evaluation and optimization of ovarian radiation dose

    SciTech Connect (OSTI)

    Messaris, Gerasimos A. T.; Abatzis, Ilias; Kagadis, George C.; Samartzis, Alexandros P.; Athanasopoulou, Panagiota; Christeas, Nikolaos; Katsanos, Konstantinos; Karnabatidis, Dimitrios; Nikiforidis, George C. [Department of Medical Physics, University Hospital of Patras, GR 265 04 Rion (Greece); Department of Medical Physics, School of Medicine, University of Patras, GR 265 04 Rion (Greece); Department of Medical Physics, University Hospital of Patras, GR 265 04 Rion, Greece and Department of Medical Physics, School of Medicine, University of Patras, GR 265 04 Rion (Greece); Department of Medical Physics, 'EVANGELISMOS' General Hospital, 45-47 Ypsilantou Street, GR 106 76 Athens (Greece); Philips Hellas, 44 Kifisias Avenue, GR 151 25 Marousi (Greece); Department of Radiology, School of Medicine, University of Patras, GR 265 04 Rion (Greece); Department of Medical Physics, University Hospital of Patras, GR 265 04 Rion, Greece and Department of Medical Physics, School of Medicine, University of Patras, GR 265 04 Rion (Greece)

    2012-07-15T23:59:59.000Z

    Purpose: The aim of the present study was the evaluation and optimization of radiation dose to the ovaries (D) in hysterosalpingography (HSG). Methods: The study included a phantom study and a clinical one. In the phantom study, we evaluated imaging results for different geometrical setups and irradiation conditions. In the clinical study, 34 women were assigned into three different fluoroscopy modes and D was estimated with direct cervical TLD measurements. Results: In the phantom study, we used a source-to-image-distance (SID) of 110 cm and a field diagonal of 48 cm, and thus decreased air KERMA rate (KR) by 19% and 70%, respectively, for beam filtration: 4 mm Al and 0.9 mm Cu (Low dose). The least radiation exposure was accomplished by using the 3.75 pps fluoroscopy mode in conjunction with beam filtration: Low dose. In the clinical study, D normalized to 50 s of fluoroscopy time with a 3.75 pps fluoroscopy mode reached a value of 0.45 {+-} 0.04 mGy. Observers' evaluation of diagnostic image quality did not significantly differ for the three different modes of acquisition that were compared. Conclusions: Digital spot radiographs could be omitted in modern flat panel systems during HSG. Fluoroscopy image acquisitions in a modern flat panel unit at 3.75 pps and a beam filtration of 4 mm Al and 0.9 mm Cu demonstrate acceptable image quality with an average D equal to 0.45 mGy. This value is lower compared to the studied literature. For these reasons, the proposed method may be recommended for routine HSG examination in order to limit radiation exposure to the ovaries.

  3. Computerized controller with service display panel for an oil well pumping motor

    SciTech Connect (OSTI)

    Markuson, N.D.; Wiens, T.A.

    1988-08-30T23:59:59.000Z

    An oil well pump controller in combination with an oil pumping unit and oil well electrical pump motor for controlling and monitoring the operation of an oil well including: microprocessor means for monitoring three-phase electrical power consumption of the electrical pump motor and for calculating real time demand power consumption of the motor, power measuring means electrically connected to the three-phase electrical input of the motor for producing an analog signal indicative of power consumption, conversion means connected to the power measuring means for converting the analog signal into a digital signal usable by the microprocessor means to calculate electrical power consumption, relay means connected to and receiving signals from the microprocessor means indicative of detected power normal, power overload and power underload conditions, the relay means additionally providing circuitry to allow the microprocessor to selectively switch the motor on or off, waterproof box means for housing the components of the oil well pump controller, the waterproof box including a service display panel, overload display means, mounted on the service display panel, which is clearly visible from a distance, and connected to the relay means for indicating when power consumption of the motor has exceeded preprogrammed limits.

  4. DuPont Displays Develops Low-Cost Method of Printing OLED Panels

    Broader source: Energy.gov [DOE]

    DuPont Displays Inc. (DDI) has developed a novel way of printing color-tunable OLED lighting panels that keeps manufacturing costs low. The method involves processing the organic layers from solution, with most of the process steps taking place under atmospheric conditions rather than in a high vacuum. Industry-standard slot-coating methods are used in conjunction with nozzle printing—in which the solutions of organic materials are continuously jetted through an array of nozzles moving at high speed—allowing the light-emitting materials to be spatially patterned.

  5. Evaluation of the potential utility of flat panel CT for quantifying relative contrast enhancement

    SciTech Connect (OSTI)

    Jones, A. Kyle; Mahvash, Armeen [Department of Imaging Physics, Division of Diagnostic Imaging, University of Texas MD Anderson Cancer Center, Houston, Texas 77030 (United States); Department of Interventional Radiology, Division of Diagnostic Imaging, University of Texas MD Anderson Cancer Center, Houston, Texas 77030 (United States)

    2012-07-15T23:59:59.000Z

    Purpose: Certain directed oncologic therapies seek to take advantage of the fact that tumors are typically more susceptible to directed therapeutic agents than normal tissue owing to their extensive networks of poorly formed, leaky vasculature. If differences between the vascularity of normal and tumor tissues could be quantified, patients could be selected for or excluded from directed treatments on the basis of this difference. However, angiographic imaging techniques such as digital subtraction angiography (DSA) yield two-dimensional data that may be inadequate for this task. As a first step, the authors evaluated the feasibility of using a commercial implementation of flat panel computed tomography (FPCT) to quantify differences in enhancement of a simulated tumor compared with normal tissue based on differences in CT number measured in precontrast and postcontrast scans. Methods: To evaluate the FPCT scanner studied, the authors scanned several phantoms containing simulated normal and tumor tissues. In the first experiment, the authors used an anthropomorphic phantom containing inclusions representing normal, tumor, and bone tissue to evaluate the constancy of CT numbers in scans repeated at clinically relevant intervals of 1 and 3 min. The authors then scanned gelatin phantoms containing dilutions of iodinated contrast to evaluate the accuracy of relative contrast enhancement measurements for a clinical FPCT system. Data were analyzed using widely available software. Results: CT numbers measured in identical locations were constant over both scan intervals evaluated. Measured relative contrast enhancement values were accurate compared with known relative contrast enhancement values. Care must be taken to avoid artifacts in reconstructed images when placing regions of interest. Conclusions: Despite its limitations, FPCT in the interventional laboratory can be used to quantify relative contrast enhancement in phantoms. This is accomplished by measuring CT number in simulated tumor and normal tissue on precontrast and postcontrast scans. This information opens the door for refinement of technique in an effort to use such a technique to plan directed therapies.

  6. Comparing performance of keyboarding/mousing tasks using notebook computer flat panel displays vs. CRT monitors

    E-Print Network [OSTI]

    Ventrca, Rachel Lynn

    2001-01-01T23:59:59.000Z

    Sitting Popliteal Height Thigh Clearance Height Elbow-Fingertip Distance Buttock-Knee Distance Buttock-Popliteal Distance Hand Length Hand Breath OLDER 73 65 + 21. 5 167. 96 + 13. 8 156. 45 + 13. 7 138. 99 + 13. 0 106. 33 + 10. 2 74. 66 + 6 6... entry task ranged between 99. 8 and 107. 8 degrees (Figure 13). The mean elbow angle for Treatment 6 was greater than that of Treatments 2 and 3 by at least 5. 0 degrees. The mean elbow angle for Treatment 4 was greater than that of Treatment 3...

  7. A nonlinear lag correction algorithm for a-Si flat-panel x-ray detectors

    SciTech Connect (OSTI)

    Starman, Jared; Star-Lack, Josh; Virshup, Gary; Shapiro, Edward; Fahrig, Rebecca [Department of Electrical Engineering, Stanford University, Stanford, California 94305 (United States) and Department of Radiology, Stanford University, Stanford, California 94305 (United States); Varian Medical Systems, Palo Alto, California 94304 (United States); Department of Radiology, Stanfod University, Stanford, California 94305 (United States)

    2012-10-15T23:59:59.000Z

    Purpose: Detector lag, or residual signal, in a-Si flat-panel (FP) detectors can cause significant shading artifacts in cone-beam computed tomography reconstructions. To date, most correction models have assumed a linear, time-invariant (LTI) model and correct lag by deconvolution with an impulse response function (IRF). However, the lag correction is sensitive to both the exposure intensity and the technique used for determining the IRF. Even when the LTI correction that produces the minimum error is found, residual artifact remains. A new non-LTI method was developed to take into account the IRF measurement technique and exposure dependencies. Methods: First, a multiexponential (N = 4) LTI model was implemented for lag correction. Next, a non-LTI lag correction, known as the nonlinear consistent stored charge (NLCSC) method, was developed based on the LTI multiexponential method. It differs from other nonlinear lag correction algorithms in that it maintains a consistent estimate of the amount of charge stored in the FP and it does not require intimate knowledge of the semiconductor parameters specific to the FP. For the NLCSC method, all coefficients of the IRF are functions of exposure intensity. Another nonlinear lag correction method that only used an intensity weighting of the IRF was also compared. The correction algorithms were applied to step-response projection data and CT acquisitions of a large pelvic phantom and an acrylic head phantom. The authors collected rising and falling edge step-response data on a Varian 4030CB a-Si FP detector operating in dynamic gain mode at 15 fps at nine incident exposures (2.0%-92% of the detector saturation exposure). For projection data, 1st and 50th frame lag were measured before and after correction. For the CT reconstructions, five pairs of ROIs were defined and the maximum and mean signal differences within a pair were calculated for the different exposures and step-response edge techniques. Results: The LTI corrections left residual 1st and 50th frame lag up to 1.4% and 0.48%, while the NLCSC lag correction reduced 1st and 50th frame residual lags to less than 0.29% and 0.0052%. For CT reconstructions, the NLCSC lag correction gave an average error of 11 HU for the pelvic phantom and 3 HU for the head phantom, compared to 14-19 HU and 2-11 HU for the LTI corrections and 15 HU and 9 HU for the intensity weighted non-LTI algorithm. The maximum ROI error was always smallest for the NLCSC correction. The NLCSC correction was also superior to the intensity weighting algorithm. Conclusions: The NLCSC lag algorithm corrected for the exposure dependence of lag, provided superior image improvement for the pelvic phantom reconstruction, and gave similar results to the best case LTI results for the head phantom. The blurred ring artifact that is left over in the LTI corrections was better removed by the NLCSC correction in all cases.

  8. active matrix flat-panel: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of semiconductor superlattice Petta, Jason 24 Transparent Active Matrix Organic Light-Emitting Diode Displays Driven by Chemistry Websites Summary: and portable electronics. In...

  9. Cone-Beam CT with Flat-Panel-Detector Digital Angiography System: Early Experience in Abdominal Interventional Procedures

    SciTech Connect (OSTI)

    Hirota, Shozo, E-mail: hirota-s@hyo-med.ac.jp; Nakao, Norio; Yamamoto, Satoshi; Kobayashi, Kaoru; Maeda, Hiroaki; Ishikura, Reiichi; Miura, Koui; Sakamoto, Kiyoshi [Hyogo College of Medicine, Department of Radiology (Japan); Ueda, Ken [Hitachi Medical Corporation, Research and Development Center (Japan); Baba, Rika [Hitachi Limited, Central Research Laboratory (Japan)

    2006-12-15T23:59:59.000Z

    We developed a cone-beam computed tomography (CBCT) system equipped with a large flat-panel detector. Data obtained by 200{sup o} rotation imaging are reconstructed by means of CBCT to generate three-dimensional images. We report the use of CBCT angiography using CBCT in 10 patients with 8 liver malignancies and 2 hypersplenisms during abdominal interventional procedures. CBCT was very useful for interventional radiologists to confirm a perfusion area of the artery catheter wedged on CT by injection of contrast media through the catheter tip, although the image quality was slightly degraded, scoring as 2.60 on average by streak artifacts. CBCT is space-saving because it does not require a CT system with a gantry, and it is also time-saving because it does not require the transfer of patients.

  10. 5:00 6:00 p.m.: Displays by Arizona Energy Consortium 6:00 7:30 p.m.: Panel Discussion

    E-Print Network [OSTI]

    Hall, Sharon J.

    , a prominent atmospheric and energy scientist, and an environmental filmmaker. Sustainability reporter Eve-in-Residence for Sustainability, ASU's School of Sustainability Founder, Citizens for Affordable Energy Former President, Shell5:00 ­ 6:00 p.m.: Displays by Arizona Energy Consortium 6:00 ­ 7:30 p.m.: Panel Discussion 7:30 ­ 8

  11. JOURNAL OF DISPLAY TECHNOLOGY, VOL. 9, NO. 5, MAY 2013 317 FDTD Analysis on Extraction Efficiency of GaN

    E-Print Network [OSTI]

    Gilchrist, James F.

    state lighting [1]­[8], thermoelectrics [9], [10], diode lasers [11], [12], and solar cells [13]. Among for a variety of applications in flat-panel displays, mobile elec- tronics, automobiles, traffic signals, large

  12. Patterning of indium tin oxide by projection photoablation and lift-off process for fabrication of flat-panel displays

    E-Print Network [OSTI]

    Jain, Kanti

    Patterning of indium tin oxide by projection photoablation and lift-off process for fabrication online 25 June 2007 Indium tin oxide ITO , an important material used as a transparent conductive oxide in such fabrication. Therefore, innovations in patterning tech- nology, especially for materials such as indium tin

  13. Amorphous Diamond Flat Panel Displays - Final Report of ER-LTR CRADA project with SI Diamond Technology

    E-Print Network [OSTI]

    Ager III, Joel W.

    1998-01-01T23:59:59.000Z

    Department of Energy under a CRADA (Cooperative Research andnm in size. Page 4 of 7 SIDT CRADA Final Report In order toFinal report of ER-LTR CRADA Project Lawrence Berkeley

  14. Micro-valve pump light valve display

    DOE Patents [OSTI]

    Yeechun Lee.

    1993-01-19T23:59:59.000Z

    A flat panel display incorporates a plurality of micro-pump light valves (MLV's) to form pixels for recreating an image. Each MLV consists of a dielectric drop sandwiched between substrates, at least one of which is transparent, a holding electrode for maintaining the drop outside a viewing area, and a switching electrode from accelerating the drop from a location within the holding electrode to a location within the viewing area. The sustrates may further define non-wetting surface areas to create potential energy barriers to assist in controlling movement of the drop. The forces acting on the drop are quadratic in nature to provide a nonlinear response for increased image contrast. A crossed electrode structure can be used to activate the pixels whereby a large flat panel display is formed without active driver components at each pixel.

  15. Does Preinterventional Flat-Panel Computer Tomography Pooled Blood Volume Mapping Predict Final Infarct Volume After Mechanical Thrombectomy in Acute Cerebral Artery Occlusion?

    SciTech Connect (OSTI)

    Wagner, Marlies, E-mail: marlies.wagner@kgu.de [Hospital of Goethe University, Institute of Neuroradiology (Germany); Kyriakou, Yiannis, E-mail: yiannis.kyriakou@siemens.com [Siemens AG, Health Care Sector (Germany); Mesnil de Rochemont, Richard du, E-mail: mesnil@em.uni-frankfurt.de [Hospital of Goethe University, Institute of Neuroradiology (Germany); Singer, Oliver C., E-mail: o.singer@em.uni-frankfurt.de [Hospital of Goethe University, Department of Neurology (Germany); Berkefeld, Joachim, E-mail: berkefeld@em.uni-frankfurt.de [Hospital of Goethe University, Institute of Neuroradiology (Germany)

    2013-08-01T23:59:59.000Z

    PurposeDecreased cerebral blood volume is known to be a predictor for final infarct volume in acute cerebral artery occlusion. To evaluate the predictability of final infarct volume in patients with acute occlusion of the middle cerebral artery (MCA) or the distal internal carotid artery (ICA) and successful endovascular recanalization, pooled blood volume (PBV) was measured using flat-panel detector computed tomography (FPD CT).Materials and MethodsTwenty patients with acute unilateral occlusion of the MCA or distal ACI without demarcated infarction, as proven by CT at admission, and successful Thrombolysis in cerebral infarction score (TICI 2b or 3) endovascular thrombectomy were included. Cerebral PBV maps were acquired from each patient immediately before endovascular thrombectomy. Twenty-four hours after recanalization, each patient underwent multislice CT to visualize final infarct volume. Extent of the areas of decreased PBV was compared with the final infarct volume proven by follow-up CT the next day.ResultsIn 15 of 20 patients, areas of distinct PBV decrease corresponded to final infarct volume. In 5 patients, areas of decreased PBV overestimated final extension of ischemia probably due to inappropriate timing of data acquisition and misery perfusion.ConclusionPBV mapping using FPD CT is a promising tool to predict areas of irrecoverable brain parenchyma in acute thromboembolic stroke. Further validation is necessary before routine use for decision making for interventional thrombectomy.

  16. Performance of a static-anode/flat-panel x-ray fluoroscopy system in a diagnostic strength magnetic field: A truly hybrid x-ray/MR imaging system

    SciTech Connect (OSTI)

    Fahrig, R.; Wen, Z.; Ganguly, A.; DeCrescenzo, G.; Rowlands, J.A.; Stevens, G.M.; Saunders, R.F.; Pelc, N.J. [Department of Radiology, Stanford University, Stanford, California 94305 (United States); Department of Radiology and Department of Physics, Stanford University, Stanford, California 94305 (United States); Department of Radiology, Stanford University, Stanford, California 94305 (United States); Sunnybrook and Women's Health Sciences Center and Medical Biophysics, University of Toronto, 2075 Bayview Avenue, Toronto, Ontario M4N 3M5 (Canada); GE Healthcare, Schenectady, Wisconsin (United States); Department of Radiology, Stanford University, Stanford, California 94305 (United States)

    2005-06-15T23:59:59.000Z

    Minimally invasive procedures are increasing in variety and frequency, facilitated by advances in imaging technology. Our hybrid imaging system (GE Apollo{sup TM} flat panel, custom Brand x-ray static anode x-ray tube, GE Lunar high-frequency power supply and 0.5 T Signa SP{sup TM}) provides both x-ray and MR imaging capability to guide complex procedures without requiring motion of the patient between two distant gantries. The performance of the x-ray tube in this closely integrated system was evaluated by modeling and measuring both the response of the filament to an externally applied field and the behavior of the electron beam for field strengths and geometries of interest. The performance of the detector was assessed by measuring the slanted-edge modulation transfer function (MTF) and when placed at zero field and at 0.5 T. Measured resonant frequencies of filaments can be approximated using a modified vibrating beam model, and were at frequencies well below the 25 kHz frequency of our generator for our filament geometry. The amplitude of vibration was not sufficient to cause shorting of the filament during operation within the magnetic field. A simple model of electrons in uniform electric and magnetic fields can be used to estimate the deflection of the electron beam on the anode for the fields of interest between 0.2 and 0.5 T. The MTF measured at the detector and the DQE showed no significant difference inside and outside of the magnetic field. With the proper modifications, an x-ray system can be fully integrated with a MR system, with minimal loss of image quality. Any x-ray tube can be assessed for compatibility when placed at a particular location within the field using the models. We have also concluded that a-Si electronics are robust against magnetic fields. Detailed knowledge of the x-ray system installation is required to provide estimates of system operation.

  17. Journal of Information Display, vol. 5, no. 4, 2004 2004 KIDS

    E-Print Network [OSTI]

    Lee, Jong Duk

    and low power consumption and expected to be a good candidate for large- size flat panel display these, CNT has unique characteristics such as a high aspect ratio, a small radius, and a high electrical Government and, in part by KRRC 2004 program. * Members, KIDS Corresponding Author : Sang Jik Kwon a

  18. Final Report of Project Nanometer Structures for Fuel Cells and Displays, etc.

    E-Print Network [OSTI]

    Ji, Qing

    2012-01-01T23:59:59.000Z

    panel displays, optical electronics, and clean energy technologies (solar and fuel cells,panel displays, optical electronics, clean energy technologies (solar and fuel cells,panel displays, optical electronics, clean energy technologies (solar and fuel cells,

  19. Integrated display scanner

    DOE Patents [OSTI]

    Veligdan, James T.

    2004-12-21T23:59:59.000Z

    A display scanner includes an optical panel having a plurality of stacked optical waveguides. The waveguides define an inlet face at one end and a screen at an opposite end, with each waveguide having a core laminated between cladding. A projector projects a scan beam of light into the panel inlet face for transmission from the screen as a scan line to scan a barcode. A light sensor at the inlet face detects a return beam reflected from the barcode into the screen. A decoder decodes the return beam detected by the sensor for reading the barcode. In an exemplary embodiment, the optical panel also displays a visual image thereon.

  20. Low Voltage, Low Power Organic Light Emitting Transistors for AMOLED Displays

    SciTech Connect (OSTI)

    McCarthy, M. A. [University of Florida, Gainesville; Liu, B. [University of Florida, Gainesville; Donoghue, E. P. [University of Florida, Gainesville; Kravchenko, Ivan I [ORNL; Kim, D. Y. [University of Florida, Gainesville; Reynolds, J. R. [University of Florida, Gainesville; So, Franky [University of Florida, Gainesville; Rinzler, A. G. [University of Florida, Gainesville

    2011-01-01T23:59:59.000Z

    Low voltage, low power dissipation, high aperture ratio organic light emitting transistors are demonstrated. The high level of performance is enabled by a carbon nanotube source electrode that permits integration of the drive transistor and the organic light emitting diode into an efficient single stacked device. Given the demonstrated performance, this technology could break the technical logjam holding back widespread deployment of active matrix organic light emitting displays at flat panel screen sizes.

  1. Native Defects in CdO and CdCuO Alloys

    E-Print Network [OSTI]

    Speaks, Derrick Tyson

    2011-01-01T23:59:59.000Z

    dollar  on  solar  cells  and  flat  panel  displays  for Given that solar cells and  flat panel displays are 

  2. Junction-based field emission structure for field emission display

    DOE Patents [OSTI]

    Dinh, Long N. (Concord, CA); Balooch, Mehdi (Berkeley, CA); McLean, II, William (Oakland, CA); Schildbach, Marcus A. (Livermore, CA)

    2002-01-01T23:59:59.000Z

    A junction-based field emission display, wherein the junctions are formed by depositing a semiconducting or dielectric, low work function, negative electron affinity (NEA) silicon-based compound film (SBCF) onto a metal or n-type semiconductor substrate. The SBCF can be doped to become a p-type semiconductor. A small forward bias voltage is applied across the junction so that electron transport is from the substrate into the SBCF region. Upon entering into this NEA region, many electrons are released into the vacuum level above the SBCF surface and accelerated toward a positively biased phosphor screen anode, hence lighting up the phosphor screen for display. To turn off, simply switch off the applied potential across the SBCF/substrate. May be used for field emission flat panel displays.

  3. The TV Turtle: A Logo Graphics System for Raster Displays

    E-Print Network [OSTI]

    Lieberman, Henry

    1976-06-01T23:59:59.000Z

    Until recently, most computer graphics systems have been oriented toward the display of line drawins, continually refreshing the screen from a display list of vectors. Developments such as plasma panel displays and ...

  4. Venice Sustainability Advisory Panel

    E-Print Network [OSTI]

    2009-01-01T23:59:59.000Z

    Venice Sustainability Advisory PanelFINAL REPORT Venice Sustainability Advisory Panel FinalInvestigator The Venice Sustainability Advisory Panel (

  5. Interactive display system having a digital micromirror imaging device

    DOE Patents [OSTI]

    Veligdan, James T.; DeSanto, Leonard; Brewster, Calvin

    2006-04-11T23:59:59.000Z

    A display system includes a waveguide optical panel having an inlet face and an opposite outlet face. A projector cooperates with a digital imaging device, e.g. a digital micromirror imaging device, for projecting an image through the panel for display on the outlet face. The imaging device includes an array of mirrors tiltable between opposite display and divert positions. The display positions reflect an image light beam from the projector through the panel for display on the outlet face. The divert positions divert the image light beam away from the panel, and are additionally used for reflecting a probe light beam through the panel toward the outlet face. Covering a spot on the panel, e.g. with a finger, reflects the probe light beam back through the panel toward the inlet face for detection thereat and providing interactive capability.

  6. E-Print Network 3.0 - amorphous selenium flat Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    on a-Se direct conversion detector Summary: ). The digital detector consists of a flat panel using the amorphous selenium technology (ANRAD Corporation... : the most promising are...

  7. Interconnection Panel

    Broader source: Energy.gov [DOE]

    Presentation—given at at the Fall 2012 Federal Utility Partnership Working Group (FUPWG) meeting—discusses the interconnection panel, including an overview of the generation interconnection process (GIP), and interconnection agreements and their terms.

  8. Development of a plasma panel radiation detector

    E-Print Network [OSTI]

    R. Ball; J. R. Beene; M. Ben-Moshe; Y. Benhammou; R. Bensimon; J. W. Chapman; E. Etzion; C. Ferretti; P. S. Friedman; D. S. Levin; Y. Silver; R. L. Varner; C. Weaverdyck; R. Wetzel; B. Zhou; T. Anderson; K. McKinny; E. H. Bentefour

    2014-06-14T23:59:59.000Z

    This article reports on the development and experimental results of commercial plasma display panels adapted for their potential use as micropattern gas radiation detectors. The plasma panel sensors (PPS) design an materials include glass substrates, metal electrodes and inert gas mixtures which provide a physically robust, hermetically-sealed device. Plasma display panels used as detectors were tested with cosmic ray muons, beta rays and gamma rays, protons and thermal neutrons. The results demonstrated rise times and time resolution of a few nanoseconds, as well as sub-millimeter spatial resolution compatible with the pixel pitch.

  9. Development of a plasma panel radiation detector

    SciTech Connect (OSTI)

    Ball, Robert [University of Michigan; Beene, James R [ORNL; Ben Moshe, M. [Tel Aviv University; Benhammou, Yan [Tel Aviv University; Bensimon, B [Tel Aviv University; Chapman, J. Wehrley [University of Michigan; Etzion, E [Tel Aviv University; Ferretti, Claudio [University of Michigan; Friedman, Dr. Peter S. [Integrated Sensors, LLC; Levin, Daniel S. [University of Michigan; Silver, Yiftah [Tel Aviv University; Weaverdyck, Curtis [University of Michigan; Wetzel, R. [University of Michigan; Zhou, Bing [University of Michigan; Anderson, T [GE Measurement and Control Solutions; McKinny, K [GE Measurement and Control Solutions; Bentefour, E [Ion Beam Applications

    2014-11-01T23:59:59.000Z

    This article reports on the development and experimental results of commercial plasma display panels adapted for their potential use as micropattern gas radiation detectors. The plasma panel sensor (PPS) design and materials include glass substrates, metal electrodes and inert gas mixtures which provide a physically robust, hermetically sealed device. Plasma display panels used as detectors were tested with cosmic ray muons, beta rays and gamma rays, protons, and thermal neutrons. The results demonstrated rise times and time resolution of a few nanoseconds, as well as sub-millimeter spatial resolution compatible with the pixel pitch.

  10. Polarization fields: dynamic light field display using multi-layer LCDs

    E-Print Network [OSTI]

    Lanman, Douglas

    We introduce polarization field displays as an optically-efficient design for dynamic light field display using multi-layered LCDs. Such displays consist of a stacked set of liquid crystal panels with a single pair of ...

  11. Plasma Panel Based Radiation Detectors

    SciTech Connect (OSTI)

    Friedman, Dr. Peter S. [Integrated Sensors, LLC; Varner Jr, Robert L [ORNL; Ball, Robert [University of Michigan; Beene, James R [ORNL; Ben Moshe, M. [Tel Aviv University; Benhammou, Yan [Tel Aviv University; Chapman, J. Wehrley [University of Michigan; Etzion, E [Tel Aviv University; Ferretti, Claudio [University of Michigan; Bentefour, E [Ion Beam Applications; Levin, Daniel S. [University of Michigan; Moshe, M. [Tel Aviv University; Silver, Yiftah [Tel Aviv University; Weaverdyck, Curtis [University of Michigan; Zhou, Bing [University of Michigan

    2013-01-01T23:59:59.000Z

    The plasma panel sensor (PPS) is a gaseous micropattern radiation detector under current development. It has many operational and fabrication principles common to plasma display panels (PDPs). It comprises a dense matrix of small, gas plasma discharge cells within a hermetically sealed panel. As in PDPs, it uses non-reactive, intrinsically radiation-hard materials such as glass substrates, refractory metal electrodes, and mostly inert gas mixtures. We are developing these devices primarily as thin, low-mass detectors with gas gaps from a few hundred microns to a few millimeters. The PPS is a high gain, inherently digital device with the potential for fast response times, fine position resolution (< 50 m RMS) and low cost. In this paper we report here on prototype PPS experimental results in detecting betas, protons and cosmic muons, and we extrapolate on the PPS potential for applications including detection of alphas, heavy-ions at low to medium energy, thermal neutrons and X-rays.

  12. TRICOLOR LIGHT EMITTING DIODE DOT MATRIX DISPLAY SYSTEM WITHAUDIO OUTPUT

    E-Print Network [OSTI]

    Pang, Grantham

    1 TRICOLOR LIGHT EMITTING DIODE DOT MATRIX DISPLAY SYSTEM WITHAUDIO OUTPUT Grantham Pang, Chi emitting diodes; tricolor display; audio communication. I. Introduction This paper relates to a tricolor broadcasting through the visible light rays transmitted by the display panel or assembly. Keywords: light

  13. ALDS 1980 panel review

    SciTech Connect (OSTI)

    Hall, D. L. [ed.] [ed.

    1981-11-01T23:59:59.000Z

    The overall goal of PNL (Pacific Northwest Laboratory) Applied Mathematical Sciences Research is development of a DOE (Department of Energy) capability for Analysis of Large Data Sets (ALDS) and transfer of this capability to other DOE laboratories and contractors. This capability is needed to satisfy DOE's increasing requirements for handling and analyzing large volumes of diverse energy and environmental data. The integrated statistics and computer science research includes the development of improved methodologies in data definition, data management, data analysis, and visual display. The purpose of this document is three-fold. First, the document is the permanent record of the ALDS 1979 panel review. Second, the document provides the PNL staff with a benchmark of where we were at the end of the second year of ALDS. Third, the document is available to laboratories, universities, and DOE headquarters as detailed description of the ALDS project, as well as an example of the new direction of AMS-funded research.

  14. SSRL- Proposal Review Panel

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Stanford Synchrotron Radiation Lab search Go an error occurred while processing this directive Proposal Review Panel Sub Panels Structural Molecular Biology & Biophysics...

  15. Method of fabrication of display pixels driven by silicon thin film transistors

    DOE Patents [OSTI]

    Carey, Paul G. (Mountain View, CA); Smith, Patrick M. (San Ramon, CA)

    1999-01-01T23:59:59.000Z

    Display pixels driven by silicon thin film transistors are fabricated on plastic substrates for use in active matrix displays, such as flat panel displays. The process for forming the pixels involves a prior method for forming individual silicon thin film transistors on low-temperature plastic substrates. Low-temperature substrates are generally considered as being incapable of withstanding sustained processing temperatures greater than about 200.degree. C. The pixel formation process results in a complete pixel and active matrix pixel array. A pixel (or picture element) in an active matrix display consists of a silicon thin film transistor (TFT) and a large electrode, which may control a liquid crystal light valve, an emissive material (such as a light emitting diode or LED), or some other light emitting or attenuating material. The pixels can be connected in arrays wherein rows of pixels contain common gate electrodes and columns of pixels contain common drain electrodes. The source electrode of each pixel TFT is connected to its pixel electrode, and is electrically isolated from every other circuit element in the pixel array.

  16. Training Room Equipment Instructions Projector and TV Display

    E-Print Network [OSTI]

    Crawford, T. Daniel

    Training Room Equipment Instructions Projector and TV Display The control panel on the wall are connected to a training room computer and room is equipped with a keyboard, mouse and clicker. Connect USB

  17. Final Report of Project Nanometer Structures for Fuel Cells and Displays, etc.

    SciTech Connect (OSTI)

    Ji, Qing

    2011-12-15T23:59:59.000Z

    Low-energy ion beam bombardment induced self-assembly has been used to form various periodic nano-size wave-ordered structures (WOS). Such WOS can be used as hard etching masks to produce nanowire arrays, trenches etc., on other materials by means of traditional etching or ion sputtering. These periodic nano-size structures have a wide range of applications, including flat panel displays, optical electronics, and clean energy technologies (solar and fuel cells, lithium batteries). In order to achieve high throughput of the above processes, a large area RF-driven multicusp nitrogen ion source has been developed for the application of nitrogen ion beam induced surface modification. An integrated ion beam system, which can house either a large area RF-driven multicusp ion source or a commercially available microwave ion source (Roth & Rau AG Tamiris 400-f) have been designed, manufactured, assembled, and tested.

  18. INTER-MOUNTAIN BASINS GREASEWOOD FLAT extent exaggerated for display

    E-Print Network [OSTI]

    to occur in sites with less interspecific competition (Ungar et al. 1969, Bransen et al. 1976). The shrub also occurs on extremely arid non-saline sites. Although most studies indicate that Sarcobatus

  19. Panel Organization 1. Panel on Structural Geology & Geoengineering

    E-Print Network [OSTI]

    Appendix A Panel Organization 1. Panel on Structural Geology & Geoengineering Chair: Dr. Clarence R Technical Exchange (open) Panel on Structural Geology & Geoengineering Denver, Colorado Topic: DOE & Performance Analysis and the Panel on Structural Geology & Geoengineering Denver, Colorado Topic: Repository

  20. Nanoscale Electrical Conductivity and Surface Spectroscopic Studies of Indium-Tin Oxide Yish-Hann Liau and Norbert F. Scherer*

    E-Print Network [OSTI]

    Scherer, Norbert F.

    such as flat panel displays, solar cells, and organic electroluminescence devices due to its unique combination

  1. A two-dimensional nanopatterned thin metallic transparent conductor with high transparency from the ultraviolet to the infrared

    E-Print Network [OSTI]

    Demir, Hilmi Volkan

    optoelectronic devices, including solar cells, flat panel displays, and light emitting diodes (LEDs). Most

  2. Interactive optical panel

    DOE Patents [OSTI]

    Veligdan, J.T.

    1995-10-03T23:59:59.000Z

    An interactive optical panel assembly includes an optical panel having a plurality of ribbon optical waveguides stacked together with opposite ends thereof defining panel first and second faces. A light source provides an image beam to the panel first face for being channeled through the waveguides and emitted from the panel second face in the form of a viewable light image. A remote device produces a response beam over a discrete selection area of the panel second face for being channeled through at least one of the waveguides toward the panel first face. A light sensor is disposed across a plurality of the waveguides for detecting the response beam therein for providing interactive capability. 10 figs.

  3. Interactive optical panel

    DOE Patents [OSTI]

    Veligdan, James T. (Manorville, NY)

    1995-10-03T23:59:59.000Z

    An interactive optical panel assembly 34 includes an optical panel 10 having a plurality of ribbon optical waveguides 12 stacked together with opposite ends thereof defining panel first and second faces 16, 18. A light source 20 provides an image beam 22 to the panel first face 16 for being channeled through the waveguides 12 and emitted from the panel second face 18 in the form of a viewable light image 24a. A remote device 38 produces a response beam 40 over a discrete selection area 36 of the panel second face 18 for being channeled through at least one of the waveguides 12 toward the panel first face 16. A light sensor 42,50 is disposed across a plurality of the waveguides 12 for detecting the response beam 40 therein for providing interactive capability.

  4. A comparison of nuclear reactor control room display panels

    E-Print Network [OSTI]

    Bowers, Frances Renae

    1988-01-01T23:59:59.000Z

    energized (and operating normally) and green indicates safe or deenergized (operation stopped) . This second coding system is the primary code in the control room of the TAMU Nuclear Engineering 10 Department's Research Reactor. It originated from... the red for danger standard mentioned at the beginning of this paragraph. In electrical systems, a closed circuit means that it is energized and therefore dangerous to touch. An open circuit means that current is not flowing and it is therefore safe...

  5. Optical panel system including stackable waveguides

    DOE Patents [OSTI]

    DeSanto, Leonard (Dunkirk, MD); Veligdan, James T. (Manorville, NY)

    2007-11-20T23:59:59.000Z

    An optical panel system including stackable waveguides is provided. The optical panel system displays a projected light image and comprises a plurality of planar optical waveguides in a stacked state. The optical panel system further comprises a support system that aligns and supports the waveguides in the stacked state. In one embodiment, the support system comprises at least one rod, wherein each waveguide contains at least one hole, and wherein each rod is positioned through a corresponding hole in each waveguide. In another embodiment, the support system comprises at least two opposing edge structures having the waveguides positioned therebetween, wherein each opposing edge structure contains a mating surface, wherein opposite edges of each waveguide contain mating surfaces which are complementary to the mating surfaces of the opposing edge structures, and wherein each mating surface of the opposing edge structures engages a corresponding complementary mating surface of the opposite edges of each waveguide.

  6. Optical panel system including stackable waveguides

    DOE Patents [OSTI]

    DeSanto, Leonard; Veligdan, James T.

    2007-03-06T23:59:59.000Z

    An optical panel system including stackable waveguides is provided. The optical panel system displays a projected light image and comprises a plurality of planar optical waveguides in a stacked state. The optical panel system further comprises a support system that aligns and supports the waveguides in the stacked state. In one embodiment, the support system comprises at least one rod, wherein each waveguide contains at least one hole, and wherein each rod is positioned through a corresponding hole in each waveguide. In another embodiment, the support system comprises at least two opposing edge structures having the waveguides positioned therebetween, wherein each opposing edge structure contains a mating surface, wherein opposite edges of each waveguide contain mating surfaces which are complementary to the mating surfaces of the opposing edge structures, and wherein each mating surface of the opposing edge structures engages a corresponding complementary mating surface of the opposite edges of each waveguide.

  7. for doubling solar panel

    E-Print Network [OSTI]

    An outline for doubling solar panel efficiency C o l o ra do S c ho o l of M i ne s Ma g a z i ne Take a look at a solar panel on a sunny Colorado day and, if you're like most people, you won't see physics professor and solar energy researcher, who admits to checking out his panels and their energy

  8. Lighting Technology Panel

    Broader source: Energy.gov [DOE]

    Presentation covers the Lighting Technology Panel for the Federal Utility Partnership Working Group (FUPWG) meeting, held on November 18-19, 2009. 

  9. Solar reflection panels

    DOE Patents [OSTI]

    Diver, Jr., Richard B. (Albuquerque, NM); Grossman, James W. (Albuquerque, NM); Reshetnik, Michael (Boulder, CO)

    2006-07-18T23:59:59.000Z

    A solar collector comprising a glass mirror, and a composite panel, wherein the back of the mirror is affixed to a front surface of the composite panel. The composite panel comprises a front sheet affixed to a surface of a core material, preferably a core material comprising a honeycomb structure, and a back sheet affixed to an opposite surface of the core material. The invention may further comprise a sealing strip, preferably comprising EPDM, positioned between the glass mirror and the front surface of the composite panel. The invention also is of methods of making such solar collectors.

  10. Prismatic optical display

    DOE Patents [OSTI]

    Veligdan, James T.; DeSanto, Leonard; Brewster, Calvin

    2004-06-29T23:59:59.000Z

    A spatially modulated light beam is projected, reflected, and redirected through a prismatic optical panel to form a video image for direct viewing thereon.

  11. Flexible optical panel

    DOE Patents [OSTI]

    Veligdan, James T. (Manorville, NY)

    2001-01-01T23:59:59.000Z

    A flexible optical panel includes laminated optical waveguides, each including a ribbon core laminated between cladding, with the core being resilient in the plane of the core for elastically accommodating differential movement thereof to permit winding of the panel in a coil.

  12. Is flat fair?

    SciTech Connect (OSTI)

    Bunzl, Martin

    2010-07-15T23:59:59.000Z

    Dynamic pricing holds out the promise of shifting peak demand as well as reducing overall demand. But it also raises thorny issues of fairness. All practical pricing systems involve tradeoffs between equity and efficiency. I examine the circumstances under which equity ought to be allowed to trump efficiency and whether or not this constitutes a defense of flat pricing. (author)

  13. Interactive display system having a scaled virtual target zone

    DOE Patents [OSTI]

    Veligdan, James T.; DeSanto, Leonard

    2006-06-13T23:59:59.000Z

    A display system includes a waveguide optical panel having an inlet face and an opposite outlet face. A projector and imaging device cooperate with the panel for projecting a video image thereon. An optical detector bridges at least a portion of the waveguides for detecting a location on the outlet face within a target zone of an inbound light spot. A controller is operatively coupled to the imaging device and detector for displaying a cursor on the outlet face corresponding with the detected location of the spot within the target zone.

  14. My Favorite OLED Panel

    Energy Savers [EERE]

    My Favorite OLED Panel Basar Erdener Sun and Snow Photo Courtesy 2009-2015 Kvikken 2 Sizable 3 Sizable Photo Courtesy Printmeneer on Etsy 4 5 Shapeable Photo Courtesy Dia...

  15. Gas filled panel insulation

    DOE Patents [OSTI]

    Griffith, B.T.; Arasteh, D.K.; Selkowitz, S.E.

    1993-12-14T23:59:59.000Z

    A structural or flexible highly insulative panel which may be translucent, is formed from multi-layer polymeric material in the form of an envelope surrounding a baffle. The baffle is designed so as to minimize heat transfer across the panel, by using material which forms substantially closed spaces to suppress convection of the low conductivity gas fill. At least a portion of the baffle carries a low emissivity surface for suppression of infrared radiation. 18 figures.

  16. Interactive display system having a matrix optical detector

    DOE Patents [OSTI]

    Veligdan, James T.; DeSanto, Leonard

    2007-01-23T23:59:59.000Z

    A display system includes a waveguide optical panel having an inlet face and an opposite outlet face. An image beam is projected across the inlet face laterally and transversely for display on the outlet face. An optical detector including a matrix of detector elements is optically aligned with the inlet face for detecting a corresponding lateral and transverse position of an inbound light spot on the outlet face.

  17. Cytoplasmic bacteriophage display system

    DOE Patents [OSTI]

    Studier, F.W.; Rosenberg, A.H.

    1998-06-16T23:59:59.000Z

    Disclosed are display vectors comprising DNA encoding a portion of a structural protein from a cytoplasmic bacteriophage, joined covalently to a protein or peptide of interest. Exemplified are display vectors wherein the structural protein is the T7 bacteriophage capsid protein. More specifically, in the exemplified display vectors the C-terminal amino acid residue of the portion of the capsid protein is joined to the N-terminal residue of the protein or peptide of interest. The portion of the T7 capsid protein exemplified comprises an N-terminal portion corresponding to form 10B of the T7 capsid protein. The display vectors are useful for high copy number display or lower copy number display (with larger fusion). Compositions of the type described herein are useful in connection with methods for producing a virus displaying a protein or peptide of interest. 1 fig.

  18. Cytoplasmic bacteriophage display system

    DOE Patents [OSTI]

    Studier, F. William (Stony Brook, NY); Rosenberg, Alan H. (Setauket, NY)

    1998-06-16T23:59:59.000Z

    Disclosed are display vectors comprising DNA encoding a portion of a structural protein from a cytoplasmic bacteriophage, joined covalently to a protein or peptide of interest. Exemplified are display vectors wherein the structural protein is the T7 bacteriophage capsid protein. More specifically, in the exemplified display vectors the C-terminal amino acid residue of the portion of the capsid protein is joined to the N-terminal residue of the protein or peptide of interest. The portion of the T7 capsid protein exemplified comprises an N-terminal portion corresponding to form 10B of the T7 capsid protein. The display vectors are useful for high copy number display or lower copy number display (with larger fusion). Compositions of the type described herein are useful in connection with methods for producing a virus displaying a protein or peptide of interest.

  19. Kentish Flats Offshore Wind Farm

    E-Print Network [OSTI]

    Firestone, Jeremy

    Kentish Flats Offshore Wind Farm #12;By August 2005 the offshore wind farm at Kentish Flats plateau just outside the main Thames shipping lanes. The Kentish Flats wind farm will comprise 30 of the wind farm could be up to 90 MW. For the benefit of the environment The British Government has set

  20. JOURNAL OF DISPLAY TECHNOLOGY, VOL. 9, NO. 2, FEBRUARY 2013 87 Time-Multiplexed Dual-View Display Using a Blue

    E-Print Network [OSTI]

    Wu, Shin-Tson

    Using a Blue Phase Liquid Crystal Jian-Peng Cui, Yan Li, Jin Yan, Hui-Chuan Cheng, and Qiong-Hua Wang Abstract--A time-multiplexed dual-view display device using a blue phase liquid crystal is proposed. In this design, a vertical field switching blue phase liquid crystal display (VFS-BPLCD) panel is used to achieve

  1. Oven wall panel construction

    DOE Patents [OSTI]

    Ellison, Kenneth (20 Avondale Cres., Markham, CA); Whike, Alan S. (R.R. #1, Caledon East, both of Ontario, CA)

    1980-04-22T23:59:59.000Z

    An oven roof or wall is formed from modular panels, each of which comprises an inner fabric and an outer fabric. Each such fabric is formed with an angle iron framework and somewhat resilient tie-bars or welded at their ends to flanges of the angle irons to maintain the inner and outer frameworks in spaced disposition while minimizing heat transfer by conduction and permitting some degree of relative movement on expansion and contraction of the module components. Suitable thermal insulation is provided within the module. Panels or skins are secured to the fabric frameworks and each such skin is secured to a framework and projects laterally so as slidingly to overlie the adjacent frame member of an adjacent panel in turn to permit relative movement during expansion and contraction.

  2. Display blocks : cubic displays for multi-perspective visualizations

    E-Print Network [OSTI]

    Pla i Conesa, Pol

    2012-01-01T23:59:59.000Z

    This thesis details the design, execution and evaluation of a new type of display technology, known as Display Blocks. Display Blocks are a response to two major limitations of current displays: visualization and interaction. ...

  3. Diesel prices flat

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisitingContract Management FermiDavidDiesel prices continueU.S.Diesel prices flat The

  4. Diesel prices flat nationally

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisitingContract Management FermiDavidDiesel prices continueU.S.Diesel prices flat

  5. Flat | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdf Jump to:ar-80m.pdfFillmore County,and WildlifeFlash Steam PowerFlat Jump to:

  6. Panel 3 - characterization

    SciTech Connect (OSTI)

    Erck, R.A.; Erdemir, A.; Janghsing Hsieh; Lee, R.H.; Xian Zheng Pan; Deming Shu [Argonne National Lab., IL (United States); Feldman, A. [National Inst. of Standards and Technology, Gaithersburg, MD (United States); Glass, J.T. [North Carolina State Univ., Raleigh (United States); Kleimer, R. [Coors Ceramics Co., Golden, CO (United States); Lawton, E.A. [JPL/Caltech, Pasadena, CA (United States); McHargue, C.J. [Univ. of Tennessee, Knoxville (United States)

    1993-01-01T23:59:59.000Z

    The task of this panel was to identify and prioritize needs in the area of characterization of diamond and diamond-like-carbon (DLC) films for use in the transportation industry. Until recent advances in production of inexpensive films of diamonds and DLC, it was not feasible that these materials could be mass produced. The Characterization Panel is restricting itself to identifying needs in areas that would be most useful to manufacturers and users in producing and utilizing diamond and DLC coatings in industry. These characterization needs include in-situ monitoring during growth, relation of structure to performance, and standards and definitions.

  7. A high brightness field emission display

    SciTech Connect (OSTI)

    Palevsky, A. [Raytheon Co., Quincy, MA (United States)

    1996-12-31T23:59:59.000Z

    The military requirement for avionics display performance requires that displays be legible with 10,000 foot-candles (fc) bright light shining into the pilot`s eyes, or 10,000 fc shining directly on the display. The contrast ratio under these conditions must be at least 4.66:1. In addition, instant-on operation is sought for temperatures as low as {minus}54 C. Currently these specifications can barely be met by monochrome CRTs whose use is counter-indicated by other factors. No color display can achieve optimum performance in the areas mentioned, nor do any current contenders, primarily AMLCD`s, have any prospects of achieving full compliance. The FED being developed by Raytheon shows strong promise of being able to achieve the brightness and contrast ratios desired. The FED is also inherently able to provide instant-on functionality at any terrestrial temperature and does not require any heating at low temperatures. The technical objective of the Raytheon development program is to develop a high performance, full color, FED Panel that meets the performance and environmental operating condition requirements specified for military and other high performance display applications.

  8. Polyplanar optical display electronics

    SciTech Connect (OSTI)

    DeSanto, L.; Biscardi, C. [Brookhaven National Lab., Upton, NY (United States). Dept. of Advanced Technology

    1997-07-01T23:59:59.000Z

    The Polyplanar Optical Display (POD) is a unique display screen which can be used with any projection source. The prototype ten inch display is two inches thick and has a matte black face which allows for high contrast images. The prototype being developed is a form, fit and functional replacement display for the B-52 aircraft which uses a monochrome ten-inch display. In order to achieve a long lifetime, the new display uses a 100 milliwatt green solid-state laser (10,000 hr. life) at 532 nm as its light source. To produce real-time video, the laser light is being modulated by a Digital Light Processing (DLP{trademark}) chip manufactured by Texas Instruments. In order to use the solid-state laser as the light source and also fit within the constraints of the B-52 display, the Digital Micromirror Device (DMD{trademark}) circuit board is removed from the Texas Instruments DLP light engine assembly. Due to the compact architecture of the projection system within the display chassis, the DMD{trademark} chip is operated remotely from the Texas Instruments circuit board. The authors discuss the operation of the DMD{trademark} divorced from the light engine and the interfacing of the DMD{trademark} board with various video formats (CVBS, Y/C or S-video and RGB) including the format specific to the B-52 aircraft. A brief discussion of the electronics required to drive the laser is also presented.

  9. Industry Partners Panel

    Broader source: Energy.gov [DOE]

    Industry Panel presenters include: Michael G. Andrew, Director - Academic and Technical Programs, Advanced Products and Materials, Johnson Controls Power Solutions Michael A. Fetcenko, Vice President and Managing Director, BASF Battery Materials – Ovonic, BASF Corporation Adam Kahn, Founder and CEO, AKHAN Technologies, Inc. Stephen E. Zimmer, Executive Director, United States Council for Automotive Research (USCAR)

  10. Overview of seismic panel activities

    SciTech Connect (OSTI)

    Bandyopadhyay, K.K.

    1991-01-01T23:59:59.000Z

    In January 1991, the DOE-EM appointed a Seismic Panel to develop seismic criteria that can be used for evaluation of underground storage tanks containing high level radioactive wastes. The Panel expects to issue the first draft of the criteria report in January 1992. This paper provides an overview of the Panel's activities and briefly discusses the criteria. 3 refs.

  11. Computational immersive displays

    E-Print Network [OSTI]

    Novy, Daniel E. (Daniel Edward)

    2013-01-01T23:59:59.000Z

    Immersion is an oft-quoted but ill-defined term used to describe a viewer or participant's sense of engagement with a visual display system or participatory media. Traditionally, advances in immersive quality came at the ...

  12. Flat Oval Spiral Duct Deflection

    E-Print Network [OSTI]

    Daugherty, Matthew

    2014-03-10T23:59:59.000Z

    , because it has less flat surfaces than rectangular duct. Flat oval can be fit in tight places because of its similar aspect ratio to rectangular duct. [23] 2.6 Duct Selection and Application All ducts are required to be sealed, but leakage testing...

  13. Absolute calibration of optical flats

    DOE Patents [OSTI]

    Sommargren, Gary E.

    2005-04-05T23:59:59.000Z

    The invention uses the phase shifting diffraction interferometer (PSDI) to provide a true point-by-point measurement of absolute flatness over the surface of optical flats. Beams exiting the fiber optics in a PSDI have perfect spherical wavefronts. The measurement beam is reflected from the optical flat and passed through an auxiliary optic to then be combined with the reference beam on a CCD. The combined beams include phase errors due to both the optic under test and the auxiliary optic. Standard phase extraction algorithms are used to calculate this combined phase error. The optical flat is then removed from the system and the measurement fiber is moved to recombine the two beams. The newly combined beams include only the phase errors due to the auxiliary optic. When the second phase measurement is subtracted from the first phase measurement, the absolute phase error of the optical flat is obtained.

  14. Transport and Defect Mechanisms in Cuprous Delafossites. 1. Comparison of Hydrothermal and

    E-Print Network [OSTI]

    Poeppelmeier, Kenneth R.

    flat-panel displays, ultraviolet light emitting diodes, heterojunctions for solar cells, and all- oxide are utilized in a variety of commercial applications, such as flat-panel displays, photovoltaic devices

  15. Variable-Temperature Electrical Measurements of Zinc Oxide/Tin Oxide-Cosubstituted Indium Oxide

    E-Print Network [OSTI]

    Poeppelmeier, Kenneth R.

    as transparent electrodes in solar cells, flat panel displays, and many other applications. The commercial TCO: Flat Panel Display Mater. Large Area Processes 1998, 508, 308. (4) Minami, T.; Takata, S.; Kakumu, T

  16. Content-adaptive parallax barriers: optimizing dual-layer 3D displays using low-rank light field factorization

    E-Print Network [OSTI]

    Lanman, Douglas

    We optimize automultiscopic displays built by stacking a pair of modified LCD panels. To date, such dual-stacked LCDs have used heuristic parallax barriers for view-dependent imagery: the front LCD shows a fixed array of ...

  17. Solar display kiosk

    SciTech Connect (OSTI)

    Clarke, R.A.W.

    1984-06-12T23:59:59.000Z

    A solar display kiosk particularly to a display kiosk that during day time conditions is illuminated by the sun. It provides, in its preferred embodiment, a closed cylindrical member placed in the vertical position with an open or a closed but light transmissive upper end, which acts as a receiver for solar or ambient light. A circumferential band at the top of the kiosk acts a shading member to place regions immediately beneath such band into shade either totally or in part (umbra and penumbra). Translucent display materials are mounted in the walls of the cylinder in the zones of umbra or penumbra. To the viewer they appear to be highly illuminated, the illumination coming from the solar light entering into the center of the cylinder.

  18. Concentrating photovoltaic solar panel

    DOE Patents [OSTI]

    Cashion, Steven A; Bowser, Michael R; Farrelly, Mark B; Hines, Braden E; Holmes, Howard C; Johnson, Jr., Richard L; Russell, Richard J; Turk, Michael F

    2014-04-15T23:59:59.000Z

    The present invention relates to photovoltaic power systems, photovoltaic concentrator modules, and related methods. In particular, the present invention features concentrator modules having interior points of attachment for an articulating mechanism and/or an articulating mechanism that has a unique arrangement of chassis members so as to isolate bending, etc. from being transferred among the chassis members. The present invention also features adjustable solar panel mounting features and/or mounting features with two or more degrees of freedom. The present invention also features a mechanical fastener for secondary optics in a concentrator module.

  19. Photovoltaic panel clamp

    DOE Patents [OSTI]

    Mittan, Margaret Birmingham (Oakland, CA); Miros, Robert H. J. (Fairfax, CA); Brown, Malcolm P. (San Francisco, CA); Stancel, Robert (Loss Altos Hills, CA)

    2012-06-05T23:59:59.000Z

    A photovoltaic panel clamp includes an upper and lower section. The interface between the assembled clamp halves and the module edge is filled by a flexible gasket material, such as EPDM rubber. The gasket preferably has small, finger like protrusions that allow for easy insertion onto the module edge while being reversed makes it more difficult to remove them from the module once installed. The clamp includes mounting posts or an integral axle to engage a bracket. The clamp also may include a locking tongue to secure the clamp to a bracket.

  20. Photovoltaic panel clamp

    DOE Patents [OSTI]

    Brown, Malcolm P.; Mittan, Margaret Birmingham; Miros, Robert H. J.; Stancel, Robert

    2013-03-19T23:59:59.000Z

    A photovoltaic panel clamp includes an upper and lower section. The interface between the assembled clamp halves and the module edge is filled by a flexible gasket material, such as EPDM rubber. The gasket preferably has small, finger like protrusions that allow for easy insertion onto the module edge while being reversed makes it more difficult to remove them from the module once installed. The clamp includes mounting posts or an integral axle to engage a bracket. The clamp also may include a locking tongue to secure the clamp to a bracket.

  1. Proposal Study Panels

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible forPortsmouth/Paducah47,193.70 HgPromising Magnesium BatteryProposalProposal Study Panels

  2. Process development for the fabrication of light emitting vacuum field emission triodes

    E-Print Network [OSTI]

    Williams, Roger T.

    1994-01-01T23:59:59.000Z

    . Light emitting diodes and triodes are also fabricated to address the feasibility of their application to flat panel displays....

  3. Solid State Sciences 4 (2002) 317322 www.elsevier.com/locate/ssscie

    E-Print Network [OSTI]

    Poeppelmeier, Kenneth R.

    2002-01-01T23:59:59.000Z

    as electrodes in solar cells, flat panel displays and other commercial devices. For instance, the in- dustry TCO

  4. Zinc Doping in Cosubstituted In2-2xSnxZnxO3-A. Ambrosini, S. Malo, and K. R. Poeppelmeier*

    E-Print Network [OSTI]

    Poeppelmeier, Kenneth R.

    applications such as solar cells and flat panel and liquid crystal displays. Sn-doped indium oxide (ITO

  5. First-principles study of the optical properties of BeO in its ambient and high-pressure phases

    E-Print Network [OSTI]

    Pandey, Ravi

    application as an ultraviolet (UV) transparent conduction oxide in flat-panel displays and solar cells can

  6. Magneto-optical Kerr rotation enhancement in CoZnO inhomogeneous magnetic semiconductor

    E-Print Network [OSTI]

    Liu, J. Ping

    impurity doping, the doped ZnO can be used as transparent electrodes in solar cells and flat panel display

  7. Phase Relationships and Physical Properties of Homologous Compounds in the Zinc OxideIndium Oxide System

    E-Print Network [OSTI]

    Poeppelmeier, Kenneth R.

    , are widely used as transparent electrodes for flat panel displays and solar cells. Commercial, thin-film tin

  8. Model for crystallization kinetics: Deviations from KolmogorovJohnsonMehlAvrami kinetics

    E-Print Network [OSTI]

    Sánchez, Angel "Anxo"

    development of active matrix-addressed flat- panel displays1 and thin-film solar cells.2 In this context

  9. Mechanisms of Zinc Oxide Nanocrystalline Thin Film Formation by Thermal Degradation of Metal-Loaded Hydrogels

    E-Print Network [OSTI]

    electrode in flat- panel displays,1 solar cells, and thin-film transistors.2,3 Other recent reports account

  10. Center for Quantum Science and Engineering (CQSE) National Center of Theoretical Sciences (NCTS)

    E-Print Network [OSTI]

    Wu, Yih-Min

    applications include solar cells and active-matrix (AM) flat-panel displays. Amorphous or polycrystalline thin

  11. NJP281382 on 14 July 2008 T h e o p e n a c c e s s j o u r n a l f o r p h y s i c s

    E-Print Network [OSTI]

    Diebold, Ulrike

    fields, e.g. in flat panel displays, solar cells, `smart windows' using oxide electrochromics and organic

  12. First-principles study of the structural, electronic, and optical properties of Ga2O3 in its monoclinic and hexagonal phases

    E-Print Network [OSTI]

    Pandey, Ravi

    electrodes for flat panel displays and solar cells, and phase shift masks for laser lithography. Ga2O3 has

  13. Solid State Communications 149 (2009) 609611 Contents lists available at ScienceDirect

    E-Print Network [OSTI]

    Pak, Hyuk Kyu

    2009-01-01T23:59:59.000Z

    in photoelectronic devices such as solar cells, flat panel displays and Corresponding author. Tel.: +82 55 350 5273

  14. Lighted display devices for producing static or animated visual displays, including animated facial features

    DOE Patents [OSTI]

    Heilbron, Valerie J; Clem, Paul G; Cook, Adam Wade

    2014-02-11T23:59:59.000Z

    An illuminated display device with a base member with a plurality of cavities therein. Illumination devices illuminate the cavities and emit light through an opening of the cavities in a pattern, and a speaker can emit sounds in synchronization with the pattern. A panel with translucent portions can overly the base member and the cavities. An animated talking character can have an animated mouth cavity complex with multiple predetermined mouth lighting configurations simulative of human utterances. The cavities can be open, or optical waveguide material or positive members can be disposed therein. Reflective material can enhance internal reflectance and light emission.

  15. Plasma Panel Sensors for Particle and Beam Detection

    E-Print Network [OSTI]

    Peter S. Friedman; Robert Ball; James R. Beene; Yan Benhammou; E. H. Bentefour; J. W. Chapman; Erez Etzion; Claudio Ferretti; Nir Guttman; Daniel S. Levin; Meny Ben-Moshe; Yiftah Silver; Robert L. Varner; Curtis Weaverdyck; Bing Zhou

    2012-11-23T23:59:59.000Z

    The plasma panel sensor (PPS) is an inherently digital, high gain, novel variant of micropattern gas detectors inspired by many operational and fabrication principles common to plasma display panels (PDPs). The PPS is comprised of a dense array of small, plasma discharge, gas cells within a hermetically-sealed glass panel, and is assembled from non-reactive, intrinsically radiation-hard materials such as glass substrates, metal electrodes and mostly inert gas mixtures. We are developing the technology to fabricate these devices with very low mass and small thickness, using gas gaps of at least a few hundred micrometers. Our tests with these devices demonstrate a spatial resolution of about 1 mm. We intend to make PPS devices with much smaller cells and the potential for much finer position resolutions. Our PPS tests also show response times of several nanoseconds. We report here our results in detecting betas, cosmic-ray muons, and our first proton beam tests.

  16. Thermal insulations using vacuum panels

    DOE Patents [OSTI]

    Glicksman, Leon R. (Lynnfield, MA); Burke, Melissa S. (Pittsburgh, PA)

    1991-07-16T23:59:59.000Z

    Thermal insulation vacuum panels are formed of an inner core of compressed low thermal conductivity powders enclosed by a ceramic/glass envelope evaluated to a low pressure.

  17. Covered Product Category: Displays

    Broader source: Energy.gov [DOE]

    FEMP provides acquisition guidance and Federal efficiency requirements across a variety of product categories, including displays, which are covered by the ENERGY STAR program. Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

  18. Plane and parabolic solar panels

    E-Print Network [OSTI]

    J. H. O. Sales; A. T. Suzuki

    2009-05-14T23:59:59.000Z

    We present a plane and parabolic collector that absorbs radiant energy and transforms it in heat. Therefore we have a panel to heat water. We study how to increment this capture of solar beams onto the panel in order to increase its efficiency in heating water.

  19. Plane and parabolic solar panels

    E-Print Network [OSTI]

    Sales, J H O

    2009-01-01T23:59:59.000Z

    We present a plane and parabolic collector that absorbs radiant energy and transforms it in heat. Therefore we have a panel to heat water. We study how to increment this capture of solar beams onto the panel in order to increase its efficiency in heating water.

  20. Half-flat Quantum Hair

    E-Print Network [OSTI]

    Hugo Garcia-Compean; Oscar Loaiza-Brito; Aldo Martinez-Merino; Roberto Santos-Silva

    2013-10-27T23:59:59.000Z

    By wrapping D3-branes over 3-cycles on a half-flat manifold we construct an effective supersymmetric black hole in the N=2 low-energy theory in four-dimensions. Specifically we find that the torsion cycles present in a half-flat compactification, corresponding to the mirror symmetric image of electric NS flux on a Calabi-Yau manifold, manifest in the half-flat black hole as quantum hair. We compute the electric and magnetic charges related to the quantum hair, and also the mass contribution to the effective black hole. We find that by wrapping a number of D3-branes equal to the order of the discrete group associated to the torsional part of the half-flat homology, the effective charge and mass terms vanishes. We compute the variation of entropy and the corresponding temperature associated with the lost of quantum hair. We also comment on the equivalence between canceling Freed-Witten anomaly and the assumption of self-duality for the 5-form field strength. Finally from a K-theoretical perspective, we compute the presence of discrete RR charge of D-branes wrapping torsional cycles in a half-flat manifold.

  1. Panelized wall system with foam core insulation

    DOE Patents [OSTI]

    Kosny, Jan (Oak Ridge, TN); Gaskin, Sally (Houston, TX)

    2009-10-20T23:59:59.000Z

    A wall system includes a plurality of wall members, the wall members having a first metal panel, a second metal panel, and an insulating core between the first panel and the second panel. At least one of the first panel and the second panel include ridge portions. The insulating core can be a foam, such as a polyurethane foam. The foam can include at least one opacifier to improve the k-factor of the foam.

  2. SHEPHERDS FLAT | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011 Strategic2 OPAM615_CostNSARDevelopmental Assignment |SHEPHERDS FLAT SHEPHERDS FLAT

  3. Display blocks: cubic displays for multi-perspective visualization

    E-Print Network [OSTI]

    Pla i Conesa, Pol

    We propose the design, implementation and evaluation of a set of tangible cubic displays. This novel approach to display technology consists of arranging six organic light emitting diode screens in a cubic form factor. We ...

  4. Reidemeister torsion for flat superconnections

    E-Print Network [OSTI]

    Abad, Camilo Arias

    2011-01-01T23:59:59.000Z

    We use higher parallel transport -- more precisely, the integration A_{infty}-functor constructed by Block-Smith and Arias Abad-Schaetz -- to define Reidemeister torsion for flat superconnections. We hope that the combinatorial Reidemeister torsion coincides with the analytic torsion defined by Mathai and Wu, thus permitting for a generalization of the Cheeger-Mueller Theorem.

  5. One Panel One Roof, DOE Powering Solar Workforce | Department...

    Broader source: Energy.gov (indexed) [DOE]

    One Panel One Roof, DOE Powering Solar Workforce One Panel One Roof, DOE Powering Solar Workforce...

  6. Blue Ribbon Panel Recommendations Report

    Broader source: Energy.gov [DOE]

    The Department of Energy's Geothermal Technologies Office (formerly Geothermal Technologies Program) assembled a geothermal Blue Ribbon Panel on March 22-23, 2011 in Albuquerque, New Mexico for a...

  7. Exascale Workshop Panel Report Meeting

    SciTech Connect (OSTI)

    Khaleel, Mohammad A.

    2010-07-01T23:59:59.000Z

    The Exascale Review Panel consists of 12 scientists and engineers with experience in various aspects of high-performance computing and its application, development, and management. The Panel hear presentations by several representatives of the workshops and town meetings convened over the past few years to examine the need for exascale computation capability and the justification for a U.S. Department of Energy (DOE) program to develop such capability. This report summarizes information provided by the presenters and substantial written reports to the Panel in advance of the meeting in Washington D.C. on January 19-20, 2010. The report also summarizes the Panel's conclusions with regard to the justification of a DOE-led exascale initiative.

  8. Solar Decathlon Technology Spotlight: Structural Insulated Panels

    Broader source: Energy.gov [DOE]

    Structural insulated panels (SIPs) are prefabricated structural elements used to build walls, ceilings, floors, and roofs.

  9. Black optic display

    DOE Patents [OSTI]

    Veligdan, James T. (Manorville, NY)

    1997-01-01T23:59:59.000Z

    An optical display includes a plurality of stacked optical waveguides having first and second opposite ends collectively defining an image input face and an image screen, respectively, with the screen being oblique to the input face. Each of the waveguides includes a transparent core bound by a cladding layer having a lower index of refraction for effecting internal reflection of image light transmitted into the input face to project an image on the screen, with each of the cladding layers including a cladding cap integrally joined thereto at the waveguide second ends. Each of the cores is beveled at the waveguide second end so that the cladding cap is viewable through the transparent core. Each of the cladding caps is black for absorbing external ambient light incident upon the screen for improving contrast of the image projected internally on the screen.

  10. Analysis of 3-panel and 4-panel microscale ionization sources

    SciTech Connect (OSTI)

    Natarajan, Srividya; Parker, Charles B.; Glass, Jeffrey T. [Department of Electrical and Computer Engineering, Duke University, Durham, North Carolina 27708 (United States); Piascik, Jeffrey R.; Gilchrist, Kristin H. [Center for Materials and Electronic Technologies, RTI International, Research Triangle Park, North Carolina 27709 (United States); Stoner, Brian R. [Department of Electrical and Computer Engineering, Duke University, Durham, North Carolina 27708 (United States); Center for Materials and Electronic Technologies, RTI International, Research Triangle Park, North Carolina 27709 (United States)

    2010-06-15T23:59:59.000Z

    Two designs of a microscale electron ionization (EI) source are analyzed herein: a 3-panel design and a 4-panel design. Devices were fabricated using microelectromechanical systems technology. Field emission from carbon nanotube provided the electrons for the EI source. Ion currents were measured for helium, nitrogen, and xenon at pressures ranging from 10{sup -4} to 0.1 Torr. A comparison of the performance of both designs is presented. The 4-panel microion source showed a 10x improvement in performance compared to the 3-panel device. An analysis of the various factors affecting the performance of the microion sources is also presented. SIMION, an electron and ion optics software, was coupled with experimental measurements to analyze the ion current results. The electron current contributing to ionization and the ion collection efficiency are believed to be the primary factors responsible for the higher efficiency of the 4-panel microion source. Other improvements in device design that could lead to higher ion source efficiency in the future are also discussed. These microscale ion sources are expected to find application as stand alone ion sources as well as in miniature mass spectrometers.

  11. Graphene folding on flat substrates

    SciTech Connect (OSTI)

    Chen, Xiaoming; Zhao, Yadong; Ke, Changhong, E-mail: cke@binghamton.edu [Department of Mechanical Engineering, State University of New York at Binghamton, Binghamton, New York 13902 (United States); Zhang, Liuyang; Wang, Xianqiao [College of Engineering, University of Georgia, Athens, Georgia 30602 (United States)

    2014-10-28T23:59:59.000Z

    We present a combined experimental-theoretical study of graphene folding on flat substrates. The structure and deformation of the folded graphene sheet are experimentally characterized by atomic force microscopy. The local graphene folding behaviors are interpreted based on nonlinear continuum mechanics modeling and molecular dynamics simulations. Our study on self-folding of a trilayer graphene sheet reports a bending stiffness of about 6.57?eV, which is about four times the reported values for monolayer graphene. Our results reveal that an intriguing free sliding phenomenon occurs at the interlayer van der Waals interfaces during the graphene folding process. This work demonstrates that it is a plausible venue to quantify the bending stiffness of graphene based on its self-folding conformation on flat substrates. The findings reported in this work are useful to a better understanding of the mechanical properties of graphene and in the pursuit of its applications.

  12. All conformally flat pure radiation metrics

    E-Print Network [OSTI]

    S. Brian Edgar; Garry Ludwig

    1996-12-20T23:59:59.000Z

    The complete class of conformally flat, pure radiation metrics is given, generalising the metric recently given by Wils.

  13. Plasma Panel Detectors for MIP Detection for the SLHC and a Test Chamber Design

    E-Print Network [OSTI]

    Robert Ball; John W. Chapman; Erez Etzion; Peter S. Friedman; Daniel S. Levin; Meny Ben Moshe; Curtis Weaverdyck; Bing Zhou

    2010-07-03T23:59:59.000Z

    Performance demands for high and super-high luminosity at the LHC (up to 10^35 cm^(-2) sec^(-1) after the 2017 shutdown) and at future colliders demand high resolution tracking detectors with very fast time response and excellent temporal and spatial resolution. We are investigating a new radiation detector technology based on Plasma Display Panels (PDP), the underlying engine of panel plasma television displays. The design and production of PDPs is supported by four decades of industrial development. Emerging from this television technology is the Plasma Panel Sensor (PPS), a novel variant of the micropattern radiation detector. The PPS is fundamentally an array of micro-Geiger plasma discharge cells operating in a non-ageing, hermetically sealed gas mixture . We report on the PPS development program, including design of a PPS Test Cell.

  14. Building Flexible Displays for Awareness and Interaction Kathryn Elliot and Saul Greenberg

    E-Print Network [OSTI]

    Greenberg, Saul

    is described below. 1. Glow Lamp is a lamp with a shade that rotates to display five different colored panels "growing" out of a small felt base. Each flower contains either a red or a green LED. The lights can be lit

  15. Roll-to-Roll Nanomanufacturing Processes and Applications to Display and Solar Cell Devices

    E-Print Network [OSTI]

    Keaveny, Tony

    Roll-to-Roll Nanomanufacturing Processes and Applications to Display and Solar Cell Devices% enhanced the power efficiency in organic solar cells as compared with devices made by ITO. BIOGRAPHY L. Jay than 6% of the backlight, in large part due to the polarizer and color filter in the panel. We propose

  16. INTERACTIVE DISPLAY OF POLYGONAL DATA

    E-Print Network [OSTI]

    Wood, Peter M.

    2011-01-01T23:59:59.000Z

    P. SEEDIS Workbook III, Interactive Polygon Mapping. LBL-August, 1974. Wood, P.M. Interactive Thematic ~mpping -- Aprivatelyownedrights. LBL-6490 INTERACTIVE DISPLAY OF

  17. Intergovernmental Panel on Climate Change

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn Other NewsSpinInteragency PanelIntergovernmental Panel on

  18. Windy Flats | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-fTriWildcat 1 Wind Project Jump to:WilsonIIa extension Jump to:Flats Jump

  19. 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim Adv. Mater. 2010, 22, 355835633558 www.advmat.de

    E-Print Network [OSTI]

    Wang, Wei Hua

    remove a significant barrier to the development of low-cost flexible displays, lighting, and solar cells-film solar cells.[1] The market for flat-panel displays alone is worth approx- imately $90 billion per year of applications, including low-emissivity windows, flat-panel displays, touch-sensitive control panels, and thin

  20. Peg supported thermal insulation panel

    DOE Patents [OSTI]

    Nowobilski, Jeffert J. (Orchard Park, NY); Owens, William J. (Kenmore, NY)

    1985-01-01T23:59:59.000Z

    A thermal insulation panel which is lightweight, load bearing, accommodates thermal stress, and has excellent high temperature insulation capability comprising high performance insulation between thin metal walls supported by high density, high strength glass pegs made in compliance with specified conditions of time, temperature and pressure.

  1. Peg supported thermal insulation panel

    DOE Patents [OSTI]

    Nowobilski, J.J.; Owens, W.J.

    1985-04-30T23:59:59.000Z

    A thermal insulation panel which is lightweight, load bearing, accommodates thermal stress, and has excellent high temperature insulation capability comprises high performance insulation between thin metal walls supported by high density, high strength glass pegs made in compliance with specified conditions of time, temperature and pressure. 2 figs.

  2. Rocky Flats Environmental Technology Site Archived Soil & Groundwater...

    Office of Environmental Management (EM)

    - Industrial Area Rocky Flats Environmental Technology Site - Mound Plume Rocky Flats Environmental Technology Site - Solar Ponds More Documents & Publications Miamisburg...

  3. Geothermal Technologies Program Blue Ribbon Panel Recommendations

    Broader source: Energy.gov [DOE]

    This report describes the recommendations of the Geothermal Blue Ribbon Panel, a panel of geothermal experts assembled in March 2011 for a discussion on the future of geothermal energy in the U.S.

  4. An experimental investigation on the multiphase flows and turbulent mixing in a flat-panel photobioreactor

    E-Print Network [OSTI]

    Hu, Hui

    image velocimetry (PIV) measurements Introduction Microalgae are an ideal source for liquid fuel, the hydrocarbons can be processed into different types of jet fuels such as Jet A and JP-8 (Wijffels and Barbosa

  5. Evaluation of Loss Factor Estimation Techniques for Free Hanging Flat Panels Excited Mechanically

    E-Print Network [OSTI]

    Dande, Himanshu Amol

    2013-05-31T23:59:59.000Z

    with simulated LF = 0.1 and fn=1000 Hz). ................................................................................. 155 Figure C.2: Study of the effect of number of triggers on dB decay (for a 1DOF system with simulated LF = 0.01 and fn=1000 Hz...) ................................................................................ 155 Figure C.3: Study of effect of number of triggers on loss factor estimation (for a 1DOF system with simulated LF = 0.1) ....................................................................................... 157 Figure C.4: Study of effect...

  6. Inside the White House: Solar Panels

    Broader source: Energy.gov [DOE]

    Go inside the White House and learn about the installation of solar panels on the roof of the residence.

  7. Total System Performance Assessment Peer Review Panel

    Broader source: Energy.gov [DOE]

    Total System Performance Assessment (TSPA) Peer Review Panel for predicting the performance of a repository at Yucca Mountain.

  8. Rocky Flats Neutron Detector Testing at Valduc, France

    SciTech Connect (OSTI)

    Kim, S S; Dulik, G M

    2011-01-03T23:59:59.000Z

    Recent program requirements of the US Department of Energy/NNSA have led to a need for a criticality accident alarm system to be installed at a newly activated facility. The Criticality Safety Group of the Lawrence Livermore National Laboratory (LLNL) was able to recover and store for possible future use approximately 200 neutron criticality detectors and 20 master alarm panels from the former Rocky Flats Plant in Golden, Colorado when the plant was closed. The Criticality Safety Group participated in a facility analysis and evaluation, the engineering design and review process, as well as the refurbishment, testing, and recalibration of the Rocky Flats criticality alarm system equipment to be used in the new facility. In order to demonstrate the functionality and survivability of the neutron detectors to the effects of an actual criticality accident, neutron detector testing was performed at the French CEA Valduc SILENE reactor from October 7 to October 19, 2010. The neutron detectors were exposed to three criticality events or pulses generated by the SILENE reactor. The first excursion was performed with a bare or unshielded reactor, and the second excursion was made with a lead shielded/reflected reactor, and the third excursion with a polyethylene reflected core. These tests of the Rocky Flats neutron detectors were performed as a part of the 2010 Criticality Accident Alarm System Benchmark Measurements at the SILENE Reactor. The principal investigators for this series of experiments were Thomas M. Miller and John C. Wagner of the Oak Ridge National Laboratory, with Nicolas Authier and Nathalie Baclet of CEA Valduc. Several other organizations were also represented, including the Y-12 National Security Complex, Lawrence Livermore National Laboratory, Los Alamos National Laboratory, CEA Saclay, and Babcock International Group.

  9. A quantum kinematics for asymptotically flat spacetimes

    E-Print Network [OSTI]

    Miguel Campiglia; Madhavan Varadarajan

    2014-12-17T23:59:59.000Z

    We construct a quantum kinematics for asymptotically flat spacetimes based on the Koslowski-Sahlmann (KS) representation. The KS representation is a generalization of the representation underlying Loop Quantum Gravity (LQG) which supports, in addition to the usual LQG operators, the action of `background exponential operators' which are connection dependent operators labelled by `background' $su(2)$ electric fields. KS states have, in addition to the LQG state label corresponding to 1 dimensional excitations of the triad, a label corresponding to a `background' electric field which describes 3 dimensional excitations of the triad. Asymptotic behaviour in quantum theory is controlled through asymptotic conditions on the background electric fields which label the {\\em states} and the background electric fields which label the {\\em operators}. Asymptotic conditions on the triad are imposed as conditions on the background electric field state label while confining the LQG spin net graph labels to compact sets. We show that KS states can be realised as wave functions on a quantum configuration space of generalized connections and that the asymptotic behaviour of each such generalized connection is determined by that of the background electric fields which label the background exponential operators. Similar to the spatially compact case, the Gauss Law and diffeomorphism constraints are then imposed through Group Averaging techniques to obtain a large sector of gauge invariant states. It is shown that this sector supports a unitary action of the group of asymptotic rotations and translations and that, as anticipated by Friedman and Sorkin, for appropriate spatial topology, this sector contains states which display fermionic behaviour under $2\\pi$ rotations.

  10. The Challenge Domestic solar panels produce electricity

    E-Print Network [OSTI]

    Crowther, Paul

    Sheffield Science Gateway. The Challenge Domestic solar panels produce electricity for homes materials to a wide range of optoelectronic devices, including solar panels. This project was one of 10 of renewable energy generated by solar panels. As a country with ambitious targets for renewable energy at both

  11. Caithness Shepherds Flat | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Flat, which commenced operations in September 2012, is one of the world's largest wind farms. Technology The DOE guarantee was issued under the Financial Institution...

  12. Plumpton College Horse riding displays

    E-Print Network [OSTI]

    Bontcheva, Kalina

    Plumpton College · Horse riding displays · Forestry demonstrations · Small animals · Tractor: enquiries@plumpton.ac.uk Tel: 01273 890454 www.plumpton.ac.uk Advice on all courses and career opportunities

  13. DISPLAY SCREEN EQUIPMENT REGULATIONS 1992

    E-Print Network [OSTI]

    , charts or computer-generated graphics are included. Screens whose main use is to show television or film the standards required by the Regulations. 4 RISKS FROM USING DISPLAY SCREENS The principal risk associated when

  14. Panel 4 - applications to transportation

    SciTech Connect (OSTI)

    Nichols, F. [Argonne National Lab., IL (United States); Au, J. [Sundstrand Aerospace, Rockford, IL (United States); Bhattacharya, R. [Universal Energy Systems, Inc., Dayton, OH (United States); Bhushan, B. [Ohio State Univ., Columbus (United States); Blunier, D. [Caterpillar, Inc., Peoria, IL (United States); Boardman, B. [Deere & Co., Moline, IL (United States); Brombolich, L. [Compu-Tec Engineering, Chesterfield, MO (United States); Davidson, J. [Vanderbilt Univ., Nashville, TN (United States); Graham, M. [Northwestern Univ., Evanston, IL (United States); Hakim, N. [Detroit Diesel Corp., MI (United States); Harris, K. [Dubbeldee Harris Diamond Corp., Mt. Arlington, NJ (United States); Hay, R. [Norton Diamond Film, Northboro, MA (United States); Herk, L. [Southwest Research Inst., Southfield, MI (United States); Hojnacki, H.; Rourk, D. [Intelligent Structures Incorporated, Canton, MI (United States); Kamo, R. [Adiabatics, Inc., Columbus, IN (United States); Nieman, B. [Allied-Signal Inc., Des Plaines, IL (United States); O`Neill, D. [3M, St. Paul, MN (United States); Peterson, M.B. [Wear Sciences, Arnold, MD (United States); Pfaffenberger, G. [Allison Gas Turbine, Indianapolis, IN (United States); Pryor, R.W. [Wayne State Univ., Detroit, MI (United States); Russell, J. [Superconductivity Publications, Inc., Somerset, NJ (United States); Syniuta, W. [Advanced Mechanical Technology, Inc., Newton, MA (United States); Tamor, M. [Ford Motor Co., Dearborn, MI (United States); Vojnovich, T. [Dept. of Energy, Washington, DC (United States); Yarbrough, W. [Pennsylvania State Univ., University Park (United States); Yust, C.S. [Oak Ridge National Lab., TN (United States)

    1993-01-01T23:59:59.000Z

    The aim of this group was to compile a listing of current and anticipated future problem areas in the transportation industry where the properties of diamond and DLC films make them especially attractive and where the panel could strongly endorse the establishment of DOE/Transportation Industry cooperative research efforts. This section identifies the problem areas for possible applications of diamond/DLC technology and presents indications of current approaches to these problems.

  15. Turkey Flat Site Effects Test Area The Turkey-Flat strong motion "blind"

    E-Print Network [OSTI]

    Oprsal, Ivo

    Turkey Flat Site Effects Test Area B B' A A' C C' The Turkey-Flat strong motion "blind" prediction experiment "Blind" Test Approach · Conduct high quality field and laboratory tests to characterize Geological Survey Turkey Flat, USA Site Effects Test Area: "Blind" Test of Predicted Ground Response

  16. Effects of gaps in adhesives that bond elastically deformed panels to parabolic, cylindrical substructures

    SciTech Connect (OSTI)

    Wilson, R.K.; Reuter, R.C. Jr.

    1982-03-01T23:59:59.000Z

    In previous studies of the mechanical behavior of line focusing solar collectors, the reflective surface panel was modeled as a thin, initially flat, elastic plate that underwent large displacements to attain the shape of a prescribed parabolic cylinder. Attention was focused upon the stresses that developed in an adhesive layer which bonded the deformed panel to a rigid, parabolic substructure. Among the myriad possible collector designs, some possess longitudinally oriented, hollow ribs or corrugations in the substructure which interrupt the transverse continuity of the bond line between the deformed panel and the substructure. Thus, finite gaps in the adhesive are present which create regions where the panel surface becomes intermittently supported. The presence of these gaps perturbs the otherwise smooth distribution of adhesive contact stresses and it is the analytical modeling of this behavior that is the subject of the present report. In particular, attention is devoted to gaps which overlap with the edge effect zone - a region near the rim or vertex of the deformed panel where, in the absence of uniform edge loads necessary to maintain a true parabolic shape, high stresses and associated deformations occur. Significant influences of the gap size and position in the edge effect zone are demonstrated and discussed.

  17. Bosonic condensation in a flat energy band

    E-Print Network [OSTI]

    Baboux, F; Jacqmin, T; Biondi, M; Lemaître, A; Gratiet, L Le; Sagnes, I; Schmidt, S; Türeci, H E; Amo, A; Bloch, J

    2015-01-01T23:59:59.000Z

    Flat bands are non-dispersive energy bands made of fully degenerate quantum states. Such bands are expected to support emergent phenomena with extraordinary spatial and temporal structures, as they strongly enhance the effect of any perturbation induced by disorder, dissipation or interactions. However, flat bands usually appear at energies above the ground state, preventing their study in systems in thermodynamic equilibrium. Here we use cavity polaritons to circumvent this issue. We engineer a flat band in a frustrated lattice of micro-pillar optical cavities. By taking advantage of the non-hermiticity of our system, we achieve for the first time bosonic condensation in a flat band. This allows revealing the peculiar effect of disorder in such band: The condensate fragments into highly localized modes, reflecting the elementary eigenstates produced by geometric frustration. This non-hermitian engineering of a bosonic flat band condensate offers a novel approach to studying coherent phases of light and matte...

  18. INTERACTIVE ANALYSIS AND DISPLAY OF TABULAR DATA

    E-Print Network [OSTI]

    Benson, W.H.

    2010-01-01T23:59:59.000Z

    July 1976. Kitous,B. Interactive matrix displays andSS98{~ tA(!. -3.2 . I INTERACTIVE ANALYSIS AND DISPLAY OF ·owned rights. ~j • 6 U I INTERACTIVE ANALYSIS AND DISPLAY OF

  19. Leaching assessments of toxic metals in waste plasma display panel glass.

    E-Print Network [OSTI]

    Chen, M; Jiang, P; Chen, H; Ogunseitan, OA; Li, Y

    2015-01-01T23:59:59.000Z

    elements in municipal solid waste incineration ?y ash. J.Beijing (MEP China). 2007. Solid waste-extraction procedureheavy metals from municipal solid waste incinerator ?y ash.

  20. Concentrating Solar Panels: Bringing the Highest Power and Lowest Cost to the Rooftop

    SciTech Connect (OSTI)

    Michael Deck; Rick Russell

    2010-01-05T23:59:59.000Z

    Soliant Energy is a venture-capital-backed startup focused on bringing advanced concentrating solar panels to market. Our fundamental innovation is that we are the first company to develop a racking solar concentrator specifically for commercial rooftop applications, resulting in the lowest LCOE for rooftop electricity generation. Today, the commercial rooftop segment is the largest and fastest-growing market in the solar industry. Our concentrating panels can make a major contribution to the SAI's objectives: reducing the cost of solar electricity and rapidly deploying capacity. Our commercialization focus was re-shaped in 2009, shifting from an emphasis solely on panel efficiency to LCOE. Since the inception of the SAI program, LCOE has become the de facto standard for comparing commercial photovoltaic systems. While estimation and prediction models still differ, the emergence of performance-based incentive (PBI) and feed-in tariff (FIT) systems, as well as power purchase agreement (PPA) financing structures make LCOE the natural metric for photovoltaic systems. Soliant Energy has designed and demonstrated lower-cost, higher-power solar panels that consists of 6 (500X) PV module assemblies utilizing multi-junction cells and an integrated two-axis tracker. In addition, we have designed and demonstrated a prototype 1000X panel assembly with 8. Cost reductions relative to conventional flat panel PV systems were realized by (1) reducing the amount of costly semiconductor material and (2) developing strategies and processes to reduce the manufacturing costs of the entire system. Performance gains against conventional benchmarks were realized with (1) two-axis tracking and (2) higher-efficiency multi-junction PV cells capable of operating at a solar concentration ratio of 1000X (1000 kW/m2). The program objectives are: (1) Develop a tracking/concentrating solar module that has the same geometric form factor as a conventional flat, roof mounted photovoltaic (PV) panel - the Soliant module will produce more power and cost less than conventional panels of the same size; (2) Target LCOE: $0.079/kWh in 2010; (3) Target efficiency - 26% in 2010 (22% for 2008 prototype, 24% for 2009 pilot); and (4) Target performance - equivalent to 650Wp in 2010 (490W for 2008 prototype, 540W for 2009 pilot).

  1. Interagency Panel | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreaking of BlytheDepartmentEnergyDemonstration DomesticEnergyInteragency Panel

  2. Design of a photovoltaic central power station: flat-plate array

    SciTech Connect (OSTI)

    Not Available

    1984-02-01T23:59:59.000Z

    A design for a photovoltaic central power station using fixed flat-panel arrays has been developed. The 100 MW plant is assumed to be located adjacent to the Saguaro Power Station of Arizona Public Service. The design assumes high-efficiency photovoltaic modules using dendritic web cells. The modules are arranged in 5 MW subfields, each with its own power conditioning unit. The photovoltaic output is connected to the existing 115 kV utility switchyard. The site specific design allows detailed cost estimates for engineering, site preparation, and installation. Collector and power conditioning costs have been treated parametrically.

  3. Measurement uncertainty in surface flatness measurement

    E-Print Network [OSTI]

    H. L. Thang

    2011-11-29T23:59:59.000Z

    Flatness of a plate is a parameter has been put under consideration for long time. Factors influencing the accuracy of this parameter have been recognized and examined carefully but placed scatterringly. Beside that those reports have not been always in harmonization with Guide for expression of uncertainty measurement (GUM). Furthermore, mathematical equations describing clearly the flatness measurement have not been seen in those reports also. We have collected those influencing factors for systematic reference purpose, re-written the equation describing the profile measurement of the plate topography, and proposed an equation for flatness determination. An illustrative numerical example will be also shown.

  4. AdS/Ricci-flat correspondence

    E-Print Network [OSTI]

    Marco M. Caldarelli; Joan Camps; Blaise Goutéraux; Kostas Skenderis

    2014-04-18T23:59:59.000Z

    We present a comprehensive analysis of the AdS/Ricci-flat correspondence, a map between a class of asymptotically locally AdS spacetimes and a class of Ricci-flat spacetimes. We provide a detailed derivation of the map, discuss a number of extensions and apply it to a number of important examples, such as AdS on a torus, AdS black branes and fluids/gravity metrics. In particular, the correspondence links the hydrodynamic regime of asymptotically flat black $p$-branes or the Rindler fluid with that of AdS. It implies that this class of Ricci-flat spacetimes inherits from AdS a generalized conformal symmetry and has a holographic structure. We initiate the discussion of holography by analyzing how the map acts on boundary conditions and holographic 2-point functions.

  5. Nuisance parameters, composite likelihoods and a panel of GARCH models

    E-Print Network [OSTI]

    Wolfe, Patrick J.

    Nuisance parameters, composite likelihoods and a panel of GARCH models Cavit Pakel Department ) GARCH panels. The defining feature of a GARCH panel with time-series length T is that, while nuisance on the application of the composite likelihood (CL) method to GARCH panels. A GARCH panel is a collection

  6. LM Records Handling System (LMRHS01) - Rocky Flats Environmental...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Rocky Flats Environmental Records Database, Office of Legacy Management LM Records Handling System (LMRHS01) - Rocky Flats Environmental Records Database, Office of Legacy...

  7. INTERACTIVE COMPUTER GRAPHICS DISPLAYS FOR HIERARCHICAL DATA STRUCTURES

    E-Print Network [OSTI]

    Cahn, D.F.

    2010-01-01T23:59:59.000Z

    INTERACTIVE COMPUTER GRAPHICS DISPLAYS FOR HIERARCHICAL DATAINTERACTIVE COMPUTER GRAPHICS DISPLAYS FOR HIERARCHICAL DATAtem. INTERACTIVE COMPUTER GRAPHICS DISPLAYS FOR HIERARCHICAL

  8. Kingspan Insulated Panels: Order (2013-CE-5353)

    Broader source: Energy.gov [DOE]

    DOE ordered Kingspan Insulated Panels, Inc. to pay a $8,000 civil penalty after finding Kingspan Insulated Panels had failed to certify that any basic models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

  9. Panel at ICSOC 2013, Berlin Felix Naumann

    E-Print Network [OSTI]

    Weske, Mathias

    Data Panel | ICSOC 2013 5 http://mike2.openmethodology.org/wiki/Big_Data_Definition #12;Open vs. Closed Sources Felix Naumann | Big Data Panel | ICSOC 2013 6 Open data linkeddata.org Government data data person Per site Sensor data Military data Open Closed #12;,,Big data" in business Amazon

  10. Panel Session Notes Session II: Energy

    E-Print Network [OSTI]

    Jawitz, James W.

    to make cars more efficient, to make solar panels store more energy to be dispersed throughout the nightPanel Session Notes Session II: Energy Moderator: Dr. Jennifer Curtis Panelists: Dr. Gary Peter price for operating cost and the cost of manufacturing go down, there are many more sectors in the US

  11. Gas pump with movable gas pumping panels

    DOE Patents [OSTI]

    Osher, John E. (Alamo, CA)

    1984-01-01T23:59:59.000Z

    Apparatus for pumping gas continuously a plurality of articulated panels of getter material, each of which absorbs gases on one side while another of its sides is simultaneously reactivated in a zone isolated by the panels themselves from a working space being pumped.

  12. PANELS AND OTHER SURVEY EXTENSIONS TO THE

    E-Print Network [OSTI]

    Toronto, University of

    PANELS AND OTHER SURVEY EXTENSIONS TO THE TRANSPORTATION TOMORROW SURVEY Data Management Group of Contents i List of Figures ii List of Tables ii 1. INTRODUCTION 1 2. THE TRANSPORTATION TOMORROW SURVEY (TTS) PROGRAM 3 3. PLANNING ISSUES WITHIN THE GTA 7 4. PANEL SURVEYS 10 5. OTHER SURVEY ISSUES

  13. AQUEOUS HOMOGENEOUS REACTORTECHNICAL PANEL REPORT

    SciTech Connect (OSTI)

    Diamond, D.J.; Bajorek, S.; Bakel, A.; Flanagan, G.; Mubayi, V.; Skarda, R.; Staudenmeier, J.; Taiwo, T.; Tonoike, K.; Tripp, C.; Wei, T.; Yarsky, P.

    2010-12-03T23:59:59.000Z

    Considerable interest has been expressed for developing a stable U.S. production capacity for medical isotopes and particularly for molybdenum- 99 (99Mo). This is motivated by recent re-ductions in production and supply worldwide. Consistent with U.S. nonproliferation objectives, any new production capability should not use highly enriched uranium fuel or targets. Conse-quently, Aqueous Homogeneous Reactors (AHRs) are under consideration for potential 99Mo production using low-enriched uranium. Although the Nuclear Regulatory Commission (NRC) has guidance to facilitate the licensing process for non-power reactors, that guidance is focused on reactors with fixed, solid fuel and hence, not applicable to an AHR. A panel was convened to study the technical issues associated with normal operation and potential transients and accidents of an AHR that might be designed for isotope production. The panel has produced the requisite AHR licensing guidance for three chapters that exist now for non-power reactor licensing: Reac-tor Description, Reactor Coolant Systems, and Accident Analysis. The guidance is in two parts for each chapter: 1) standard format and content a licensee would use and 2) the standard review plan the NRC staff would use. This guidance takes into account the unique features of an AHR such as the fuel being in solution; the fission product barriers being the vessel and attached systems; the production and release of radiolytic and fission product gases and their impact on operations and their control by a gas management system; and the movement of fuel into and out of the reactor vessel.

  14. Thin film photovoltaic panel and method

    DOE Patents [OSTI]

    Ackerman, Bruce (El Paso, TX); Albright, Scot P. (El Paso, TX); Jordan, John F. (El Paso, TX)

    1991-06-11T23:59:59.000Z

    A thin film photovoltaic panel includes a backcap for protecting the active components of the photovoltaic cells from adverse environmental elements. A spacing between the backcap and a top electrode layer is preferably filled with a desiccant to further reduce water vapor contamination of the environment surrounding the photovoltaic cells. The contamination of the spacing between the backcap and the cells may be further reduced by passing a selected gas through the spacing subsequent to sealing the backcap to the base of the photovoltaic panels, and once purged this spacing may be filled with an inert gas. The techniques of the present invention are preferably applied to thin film photovoltaic panels each formed from a plurality of photovoltaic cells arranged on a vitreous substrate. The stability of photovoltaic conversion efficiency remains relatively high during the life of the photovoltaic panel, and the cost of manufacturing highly efficient panels with such improved stability is significantly reduced.

  15. Display device for indicating the value of a parameter in a process plant

    DOE Patents [OSTI]

    Scarola, Kenneth (Windsor, CT); Jamison, David S. (Windsor, CT); Manazir, Richard M. (North Canton, CT); Rescorl, Robert L. (Vernon, CT); Harmon, Daryl L. (Enfield, CT)

    1993-01-01T23:59:59.000Z

    An advanced control room complex for a nuclear power plant, including a discrete indicator and alarm system (72) which is nuclear qualified for rapid response to changes in plant parameters and a component control system (64) which together provide a discrete monitoring and control capability at a panel (14-22, 26, 28) in the control room (10). A separate data processing system (70), which need not be nuclear qualified, provides integrated and overview information to the control room and to each panel, through CRTs (84) and a large, overhead integrated process status overview board (24). The discrete indicator and alarm system (72) and the data processing system (70) receive inputs from common plant sensors and validate the sensor outputs to arrive at a representative value of the parameter for use by the operator during both normal and accident conditions, thereby avoiding the need for him to assimilate data from each sensor individually. The integrated process status board (24) is at the apex of an information hierarchy that extends through four levels and provides access at each panel to the full display hierarchy. The control room panels are preferably of a modular construction, permitting the definition of inputs and outputs, the man machine interface, and the plant specific algorithms, to proceed in parallel with the fabrication of the panels, the installation of the equipment and the generic testing thereof.

  16. Effects of solar photovoltaic panels on roof heat transfer

    E-Print Network [OSTI]

    Dominguez, Anthony; Kleissl, Jan; Luvall, Jeffrey C

    2011-01-01T23:59:59.000Z

    comes from both the solar panel and the sky weighted by the underside of the tilted solar panels and the surface of of a roof  underneath a solar panel compared to that of an 

  17. Effects of solar photovoltaic panels on roof heat transfer

    E-Print Network [OSTI]

    Dominguez, Anthony; Kleissl, Jan; Luvall, Jeffrey C

    2011-01-01T23:59:59.000Z

    the underside of the tilted solar panels and the surface of the roof under the solar panel (Fig.  2).  An air temperature of the  solar panel is similar to the roof 

  18. DOE Hydrogen and Fuel Cell Activities Panel Discussion: 2010...

    Broader source: Energy.gov (indexed) [DOE]

    DOE Hydrogen and Fuel Cell Activities Panel Discussion: 2010 SAE World Congress DOE Hydrogen and Fuel Cell Activities Panel Discussion: 2010 SAE World Congress Presentation by...

  19. ADVANCED REFLECTIVE FILMS AND PANELS FOR NEXT GENERATION SOLAR...

    Office of Environmental Management (EM)

    ADVANCED REFLECTIVE FILMS AND PANELS FOR NEXT GENERATION SOLAR COLLECTORS ADVANCED REFLECTIVE FILMS AND PANELS FOR NEXT GENERATION SOLAR COLLECTORS This presentation was delivered...

  20. New Ideas for Seeding Your Solar Marketplace Workshop Panel Presentati...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Panel Presentations New Ideas for Seeding Your Solar Marketplace Workshop Panel Presentations Download the speaker presentations from the 2014 SunShot Grand Challenge Summit and...

  1. Buildings of the Future Research Project Launch and Virtual Panel...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Buildings of the Future Research Project Launch and Virtual Panel Discussion on Building Technology Trends Buildings of the Future Research Project Launch and Virtual Panel...

  2. DOE Hydrogen and Fuel Cell Activities Panel Discussion: 2010...

    Energy Savers [EERE]

    Activities Panel Discussion: 2010 SAE World Congress DOE Hydrogen and Fuel Cell Activities Panel Discussion: 2010 SAE World Congress Presentation by Sunita Satyapal at the 2010...

  3. Rocky Flats Compliance Program; Technology summary

    SciTech Connect (OSTI)

    NONE

    1994-02-01T23:59:59.000Z

    The Department of Energy (DOE) established the Office of Technology Development (EM-50) (OTD) as an element of Environmental Restoration and Waste Management (EM) in November 1989. The primary objective of the Office of Technology Development, Rocky Flats Compliance Program (RFCP), is to develop altemative treatment technologies for mixed low-level waste (wastes containing both hazardous and radioactive components) to use in bringing the Rocky Flats Plant (RFP) into compliance with Federal and state regulations and agreements. Approximately 48,000 cubic feet of untreated low-level mixed waste, for which treatment has not been specified, are stored at the RFP. The cleanup of the Rocky Flats site is driven by agreements between DOE, the Environmental Protection Agency (EPA), and the Colorado Department of Health (CDH). Under these agreements, a Comprehensive Treatment and Management Plan (CTMP) was drafted to outline the mechanisms by which RFP will achieve compliance with the regulations and agreements. This document describes DOE`s strategy to treat low-level mixed waste to meet Land Disposal Restrictions and sets specific milestones related to the regulatory aspects of technology development. These milestones detail schedules for the development of technologies to treat all of the mixed wastes at the RFP. Under the Federal Facilities Compliance Act (FFCA), the CTMP has been incorporated into Rocky Flats Plant Conceptual Site Treatment Plan (CSTP). The CSTP will become the Rocky Flats Plant site Treatment Plan in 1995 and will supersede the CTMP.

  4. Field emission from organic materials

    E-Print Network [OSTI]

    Kymissis, Ioannis, 1977-

    2003-01-01T23:59:59.000Z

    Field emission displays (FEDs) show great promise as high performance flat panel displays. The light emission process is efficient, long lifetimes are possible with high brightness, and bright passive matrix displays can ...

  5. CHINA PARTICUOLOGY Vol. 3, No. 6, 321-328, 2005 MICROMECHANICS OF MACROELECTRONICS

    E-Print Network [OSTI]

    Suo, Zhigang

    , ranging from paper-like displays to thin-film solar cells, technologies that aim to address the essential be addressed. E-mail: suo@deas.harvard.edu Abstract The advent of flat-panel displays has opened the era & Chalamala, 2005). At present, the most visible application of macroelectronics is flat-panel displays

  6. Precise Application of Transparent Conductive Oxide Coatings...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Application of Transparent Conductive Oxide Coatings for Flat Panel Displays and Photovoltaic Cells Technology available for licensing: New transparent conducting oxide (TCO)...

  7. U.S. Energy Information Administration (EIA) - Sector

    Gasoline and Diesel Fuel Update (EIA)

    penetration is also expected for ENERGY STAR televisions and computer monitors. Flat panel displays capture a growing share of the market and overall stock efficiency improves...

  8. Effects of high-dose Mn implantation into ZnO grown on sapphire Y. W. Heo, M. P. Ivill, K. Ip, D. P. Norton, and S. J. Peartona)

    E-Print Network [OSTI]

    Hebard, Arthur F.

    for flat-panel displays, and more efficient solar cells.1­12 There is also interest in developing the use

  9. 331ZnO nanostructured transparent thin films by PLD Corresponding author: M. Suchea, e-mail: mirasuchea@iesl.forth.gr

    E-Print Network [OSTI]

    -to-band transitions [1], while it can be used as transparent electrode in solar cells and flat panel displays, grating

  10. Chemical tracking at the Rocky Flats Plant

    SciTech Connect (OSTI)

    Costain, D.B.

    1994-04-01T23:59:59.000Z

    EG&G Rocky Flats, Inc., has developed a chemical tracking system to support compliance with the Emergency Planning and community Right-to-Know Act (EPCRA) at the Rocky Flats Plant. This system, referred to as the EPCRA Chemical Control system (ECCS), uses bar code technology to uniquely identify and track the receipt, distribution, and use of chemicals. Chemical inventories are conducted using hand-held electronic scanners to update a site wide chemical database on a VAX 6000 computer. Information from the ECCS supports preparation of the EPCRA Tier II and Form R reports on chemical storage and use.

  11. A view-sequential 3D display

    E-Print Network [OSTI]

    Cossairt, Oliver S. (Oliver Strider), 1978-

    2003-01-01T23:59:59.000Z

    This thesis outlines the various techniques for creating electronic 3D displays and analyzes their commercial potential. The thesis argues for the use of view-sequential techniques in the design of 3D displays based on ...

  12. Investigation of Energy-Efficient Supermarket Display Cases

    SciTech Connect (OSTI)

    Walker, D.H.

    2005-01-21T23:59:59.000Z

    Supermarkets represent one of the largest energy-intensive building groups in the commercial sector, consuming 2 to 3 million kWh/yr per store (ES-1). Over half of this energy use is for the refrigeration of food display cases and storage coolers. Display cases are used throughout a supermarket for the merchandising of perishable food products. The cases are maintained at air temperatures ranging from -10 to 35 F, depending upon the type of product stored. The operating characteristics and energy requirements of the refrigeration system are directly related to the refrigeration load. The sources of the display case refrigeration load consist of: (1) Moist and warm air infiltration through the open front of the case--air curtains are employed to inhibit this infiltration, but some ambient air is entrained, which adds a substantial portion to the refrigeration load. (2) Heat conduction through case panels and walls. (3) Thermal radiation from the ambient to the product and display case interior. (4) Internal thermal loads--the use of lights, evaporator fans, periodic defrosts, and antisweat heaters adds to the refrigeration load of the display case as well as directly consuming electric energy. The impact of each of these elements on the refrigeration load is very dependent upon case type (Figure ES-1). For example, air infiltration is the most significant portion of the refrigeration load for open, multi-deck cases, while radiation is the largest part of the load for tub-type cases. The door anti-sweat heaters represent a major share of the refrigeration load for frozen food door reach-in cases. Figure ES-2 shows the distribution of display cases in a typical supermarket (ES-2). Open, multi-deck, medium temperature display cases typically comprise about half of the refrigerated fixtures in a store (ES-3). In addition, medium temperature fixtures and storage coolers account for roughly 70 to 75 percent of the total store refrigeration load with open, multi-deck cases contributing about 3/4 of that fraction. Consequently, the focus of this investigation has tilted toward the open, vertical, multi-deck medium temperature case type. Various technologies and control methods are energy efficiency measures (EEMs) that could be applied to display cases and result in the reduction of the refrigeration load and of the energy consumption of the supermarket refrigeration system. An extensive evaluation of the EEMs was conducted in order to select those that met the following criteria: (1) Near-term implementation--All EEMs considered could be implemented with existing refrigeration hardware and technology. (2) Potential for energy-efficiency improvements--Energy savings and/or refrigeration load reduction must be obtained by the implementation of the EEM. (3) Enhancement of the ability to maintain target product temperature--Proper operation of the display case and maintenance of the stored product temperature could not be compromised by the use of the EEM. The energy impact of a number of viable display case EEMs was quantified by performing whole building hourly simulations. A special version of the U.S. Department of Energy's (DOE-2.3) program was used to develop a model of a supermarket. The model was then calibrated using available end-use monitored data to increase confidence in simulation results.

  13. REPOSITORY RECONFIGURATION OF PANELS 9 AND 10

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ventilation system of the WIPP repository for various configurations to support the mining and operation of the proposed Panels 9A and 10A. The MVS ventilation modeling verifies...

  14. Robust estimation procedure in panel data model

    SciTech Connect (OSTI)

    Shariff, Nurul Sima Mohamad [Faculty of Science of Technology, Universiti Sains Islam Malaysia (USIM), 71800, Nilai, Negeri Sembilan (Malaysia); Hamzah, Nor Aishah [Institute of Mathematical Sciences, Universiti Malaya, 50630, Kuala Lumpur (Malaysia)

    2014-06-19T23:59:59.000Z

    The panel data modeling has received a great attention in econometric research recently. This is due to the availability of data sources and the interest to study cross sections of individuals observed over time. However, the problems may arise in modeling the panel in the presence of cross sectional dependence and outliers. Even though there are few methods that take into consideration the presence of cross sectional dependence in the panel, the methods may provide inconsistent parameter estimates and inferences when outliers occur in the panel. As such, an alternative method that is robust to outliers and cross sectional dependence is introduced in this paper. The properties and construction of the confidence interval for the parameter estimates are also considered in this paper. The robustness of the procedure is investigated and comparisons are made to the existing method via simulation studies. Our results have shown that robust approach is able to produce an accurate and reliable parameter estimates under the condition considered.

  15. MODIFICATIONS TO THE WIPP PANEL CLOSURE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    panel closure design. FLAC3D implements the Callahan and DeVries (1991) crushed salt creep constitutive model. This model is based on Sjaardema and Krieg (1987) and was...

  16. Multibrowsing: Moving Web Content across Multiple Displays

    E-Print Network [OSTI]

    Stanford University

    is a framework for exploiting multiple heterogeneous displays, whether fixed or on mobile computing devices displays in a ubiquitous computing environment. The dis- plays may be "public" (e.g. wall-sized fixed for multi- display environments. Since it uses Web standards, it accommodates any device or platform already

  17. REVIEW/SYNTHSE Threat display in birds

    E-Print Network [OSTI]

    Hurd, Peter L.

    REVIEW/SYNTHÈSE Threat display in birds Peter L. Hurd and Magnus Enquist Abstract: The study of threat displays has long been an area in which theory and empirical work have each spurred the other. A great deal that classical ethologists have accurately described about threat displays still lacks

  18. Neutron shielding panels for reactor pressure vessels

    DOE Patents [OSTI]

    Singleton, Norman R. (Murrysville, PA)

    2011-11-22T23:59:59.000Z

    In a nuclear reactor neutron panels varying in thickness in the circumferential direction are disposed at spaced circumferential locations around the reactor core so that the greatest radial thickness is at the point of highest fluence with lesser thicknesses at adjacent locations where the fluence level is lower. The neutron panels are disposed between the core barrel and the interior of the reactor vessel to maintain radiation exposure to the vessel within acceptable limits.

  19. Neal Lane: Science in a Flat World

    SciTech Connect (OSTI)

    Neal Lane

    2006-09-12T23:59:59.000Z

    Lane discusses the changes that have taken place in the world since World War II that have made it "flatter," referring to Thomas L. Friedman's book, The World is Flat. Friedman's main premise is that inexpensive telecommunications is bringing about unhampered international competition, the demise of economic stability, and a trend toward outsourcing services, such as computer programming, engineering and science research.

  20. Neal Lane: Science in a Flat World

    ScienceCinema (OSTI)

    Neal Lane

    2010-09-01T23:59:59.000Z

    Lane discusses the changes that have taken place in the world since World War II that have made it "flatter," referring to Thomas L. Friedman's book, The World is Flat. Friedman's main premise is that inexpensive telecommunications is bringing about unhampered international competition, the demise of economic stability, and a trend toward outsourcing services, such as computer programming, engineering and science research.

  1. Evacuated flat-plate solar collectors

    SciTech Connect (OSTI)

    Whittemore, P.G.

    1981-09-15T23:59:59.000Z

    A structural support system is disclosed for use in an evacuated, flat-plate, solar collector to eliminate the problem of stress fractures in a glass cover plate. Nonlinearly spaced supports are used within the collector to dampen vibrations in the glass cover and to prevent overdeflection before buckling or stress fractures occur.

  2. Flat Space Limit of (Higher-Spin) Cardy Formula

    E-Print Network [OSTI]

    Max Riegler

    2014-11-14T23:59:59.000Z

    In this note I derive the flat space limit of the modified Cardy formula associated with inner horizons and show that it reproduces the correct Galilean conformal field theory counting of flat space cosmology microstates. l also determine the entropy of flat space cosmologies in flat space chiral gravity in this way. In addition, I derive a Cardy-like expression for flat space cosmologies with spin-3 charges and thus give a prediction for the corresponding Galilean conformal field theory counting of flat space cosmology microstates with spin-3 charges.

  3. Adsorption of branched and dendritic polymers onto flat surfaces: A Monte Carlo study

    SciTech Connect (OSTI)

    Sommer, J.-U. [Leibniz Institute of Polymer Research Dresden e. V., 01069 Dresden (Germany) [Leibniz Institute of Polymer Research Dresden e. V., 01069 Dresden (Germany); Institute for Theoretical Physics, Technische Universität Dresden, 01069 Dresden (Germany); K?os, J. S. [Leibniz Institute of Polymer Research Dresden e. V., 01069 Dresden (Germany) [Leibniz Institute of Polymer Research Dresden e. V., 01069 Dresden (Germany); Faculty of Physics, A. Mickiewicz University, Umultowska 85, 61-614 Pozna? (Poland); Mironova, O. N. [Leibniz Institute of Polymer Research Dresden e. V., 01069 Dresden (Germany)] [Leibniz Institute of Polymer Research Dresden e. V., 01069 Dresden (Germany)

    2013-12-28T23:59:59.000Z

    Using Monte Carlo simulations based on the bond fluctuation model we study the adsorption of starburst dendrimers with flexible spacers onto a flat surface. The calculations are performed for various generation number G and spacer length S in a wide range of the reduced temperature ? as the measure of the interaction strength between the monomers and the surface. Our simulations indicate a two-step adsorption scenario. Below the critical point of adsorption, ?{sub c}, a weakly adsorbed state of the dendrimer is found. Here, the dendrimer retains its shape but sticks to the surface by adsorbed spacers. By lowering the temperature below a spacer-length dependent value, ?*(S) < ?{sub c}, a step-like transition into a strongly adsorbed state takes place. In the flatly adsorbed state the shape of the dendrimer is well described by a mean field model of a dendrimer in two dimensions. We also performed simulations of star-polymers which display a simple crossover-behavior in full analogy to linear chains. By analyzing the order parameter of the adsorption transition, we determine the critical point of adsorption of the dendrimers which is located close to the critical point of adsorption for star-polymers. While the order parameter for the adsorbed spacers displays a critical crossover scaling, the overall order parameter, which combines both critical and discontinuous transition effects, does not display simple scaling. The step-like transition from the weak into the strong adsorbed regime is confirmed by analyzing the shape-anisotropy of the dendrimers. We present a mean-field model based on the concept of spacer adsorption which predicts a discontinuous transition of dendrimers due to an excluded volume barrier. The latter results from an increased density of the dendrimer in the flatly adsorbed state which has to be overcome before this state is thermodynamically stable.

  4. Large-Area Plasma-Panel Radiation Detectors for Nuclear Medicine Imaging to Homeland Security and the Super Large Hadron Collider

    E-Print Network [OSTI]

    Peter S. Friedman; Robert Ball; J. Wehrley Chapman; Daniel S. Levin; Curtis Weaverdyck; Bing Zhou; Yan Benhammou; Erez Etzion; M. Ben Moshe; Yiftah Silver; James R. Beene; Robert L. Varner Jr.

    2010-07-03T23:59:59.000Z

    A new radiation sensor derived from plasma panel display technology is introduced. It has the capability to detect ionizing and non-ionizing radiation over a wide energy range and the potential for use in many applications. The principle of operation is described and some early results presented.

  5. Radiation content of Conformally flat initial data

    E-Print Network [OSTI]

    C. O. Lousto; R. H. Price

    2004-01-11T23:59:59.000Z

    We study the radiation of energy and linear momentum emitted to infinity by the headon collision of binary black holes, starting from rest at a finite initial separation, in the extreme mass ratio limit. For these configurations we identify the radiation produced by the initially conformally flat choice of the three geometry. This identification suggests that the radiated energy and momentum of headon collisions will not be dominated by the details of the initial data for evolution of holes from initial proper separations $L_0\\geq7M$. For non-headon orbits, where the amount of radiation is orders of magnitude larger, the conformally flat initial data may provide a relative even better approximation.

  6. Basic TRUEX process for Rocky Flats Plant

    SciTech Connect (OSTI)

    Leonard, R.A.; Chamberlain, D.B.; Dow, J.A.; Farley, S.E.; Nunez, L.; Regalbuto, M.C.; Vandegrift, G.F.

    1994-08-01T23:59:59.000Z

    The Generic TRUEX Model was used to develop a TRUEX process flowsheet for recovering the transuranics (Pu, Am) from a nitrate waste stream at Rocky Flats Plant. The process was designed so that it is relatively insensitive to changes in process feed concentrations and flow rates. Related issues are considered, including solvent losses, feed analysis requirements, safety, and interaction with an evaporator system for nitric acid recycle.

  7. Geothermal: Sponsored by OSTI -- Telephone Flat Geothermal Development...

    Office of Scientific and Technical Information (OSTI)

    Telephone Flat Geothermal Development Project Environmental Impact Statement Environmental Impact Report. Final: Comments and Responses to Comments Geothermal Technologies Legacy...

  8. Remote geologic structural analysis of Yucca Flat

    SciTech Connect (OSTI)

    Foley, M.G.; Heasler, P.G.; Hoover, K.A. (Pacific Northwest Lab., Richland, WA (United States)); Rynes, N.J. (Northern Illinois Univ., De Kalb, IL (United States)); Thiessen, R.L.; Alfaro, J.L. (Washington State Univ., Pullman, WA (United States))

    1991-12-01T23:59:59.000Z

    The Remote Geologic Analysis (RGA) system was developed by Pacific Northwest Laboratory (PNL) to identify crustal structures that may affect seismic wave propagation from nuclear tests. Using automated methods, the RGA system identifies all valleys in a digital elevation model (DEM), fits three-dimensional vectors to valley bottoms, and catalogs all potential fracture or fault planes defined by coplanar pairs of valley vectors. The system generates a cluster hierarchy of planar features having greater-than-random density that may represent areas of anomalous topography manifesting structural control of erosional drainage development. Because RGA uses computer methods to identify zones of hypothesized control of topography, ground truth using a well-characterized test site was critical in our evaluation of RGA's characterization of inaccessible test sites for seismic verification studies. Therefore, we applied RGA to a study area centered on Yucca Flat at the Nevada Test Site (NTS) and compared our results with both mapped geology and geologic structures and with seismic yield-magnitude models. This is the final report of PNL's RGA development project for peer review within the US Department of Energy Office of Arms Control (OAC) seismic-verification community. In this report, we discuss the Yucca Flat study area, the analytical basis of the RGA system and its application to Yucca Flat, the results of the analysis, and the relation of the analytical results to known topography, geology, and geologic structures. 41 refs., 39 figs., 2 tabs.

  9. Remote geologic structural analysis of Yucca Flat

    SciTech Connect (OSTI)

    Foley, M.G.; Heasler, P.G.; Hoover, K.A. [Pacific Northwest Lab., Richland, WA (United States); Rynes, N.J. [Northern Illinois Univ., De Kalb, IL (United States); Thiessen, R.L.; Alfaro, J.L. [Washington State Univ., Pullman, WA (United States)

    1991-12-01T23:59:59.000Z

    The Remote Geologic Analysis (RGA) system was developed by Pacific Northwest Laboratory (PNL) to identify crustal structures that may affect seismic wave propagation from nuclear tests. Using automated methods, the RGA system identifies all valleys in a digital elevation model (DEM), fits three-dimensional vectors to valley bottoms, and catalogs all potential fracture or fault planes defined by coplanar pairs of valley vectors. The system generates a cluster hierarchy of planar features having greater-than-random density that may represent areas of anomalous topography manifesting structural control of erosional drainage development. Because RGA uses computer methods to identify zones of hypothesized control of topography, ground truth using a well-characterized test site was critical in our evaluation of RGA`s characterization of inaccessible test sites for seismic verification studies. Therefore, we applied RGA to a study area centered on Yucca Flat at the Nevada Test Site (NTS) and compared our results with both mapped geology and geologic structures and with seismic yield-magnitude models. This is the final report of PNL`s RGA development project for peer review within the US Department of Energy Office of Arms Control (OAC) seismic-verification community. In this report, we discuss the Yucca Flat study area, the analytical basis of the RGA system and its application to Yucca Flat, the results of the analysis, and the relation of the analytical results to known topography, geology, and geologic structures. 41 refs., 39 figs., 2 tabs.

  10. Eternal Sunshine of the Solar Panel

    E-Print Network [OSTI]

    Ginithan, Mackenzie; Lefevre, Daniel; Srinivasan, Sowmya; Urena, Barbara; Barley, Kamal; Vega, Jose; Yong, Kamuela E; Flores, Jose

    2014-01-01T23:59:59.000Z

    The social dynamics of residential solar panel use within a theoretical population are studied using a compartmental model. In this study we consider three solar power options commonly available to consumers: the community block, leasing, and buying. In particular we are interested in studying how social influence affects the dynamics within these compartments. As a result of this research a threshold value is determined, beyond which solar panels persist in the population. In addition, as is standard in this type of study, we perform equilibrium analysis, as well as uncertainty and sensitivity analyses on the threshold value. We also perform uncertainty analysis on the population levels of each compartment. The analysis shows that social influence plays an important role in the adoption of residential solar panels.

  11. Control of an industrial polymerization reactor using flatness *, P. Rouchona

    E-Print Network [OSTI]

    Control of an industrial polymerization reactor using flatness N. Petita, *, P. Rouchona , J polypropylene reactor. This is the first industrial process-controller to use the so-called flatness property tank reactor; Control; Flatness; Industrial application 1. Introduction The aim of this paper

  12. NATURAL HERITAGE RESOURCES OF THE ROCKY FLATS ENVIRONMENTAL TECHNOLOGY SITE

    E-Print Network [OSTI]

    NATURAL HERITAGE RESOURCES OF THE ROCKY FLATS ENVIRONMENTAL TECHNOLOGY SITE AND THEIR CONSERVATION Methods 3 Rocky Flats Conservation Site Description 10 Walnut Creek Conservation Site Description 22 Rocky Flats Conservation Site 16 Table 3: Known Natural Elements in the Walnut Creek Conservation Site 23

  13. DISPLAYING AND INTERPRETING FLUID INCLUSION STRATIGRAPHY ANALYSES...

    Open Energy Info (EERE)

    ANALYSES ON MUDLOG GRAPHS Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Proceedings: DISPLAYING AND INTERPRETING FLUID INCLUSION STRATIGRAPHY...

  14. Critical function and success path summary display

    DOE Patents [OSTI]

    Scarola, Kenneth (Windsor, CT); Jamison, David S. (Windsor, CT); Manazir, Richard M. (North Canton, CT); Rescorl, Robert L. (Vernon, CT); Harmon, Daryl L. (Enfield, CT)

    1995-01-01T23:59:59.000Z

    The content of and hierarchical access to three levels of display pages containing information on critical function monitoring and success path monitoring.

  15. Hydrogen Safety Panel | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(Fact Sheet), GeothermalGridHYDROGEND D eReview |Panel Hydrogen Safety Panel 2009

  16. Introduction Flattening the Earth Continuation procedure Flat Earth Numerical simulations Continuation from a flat to a round Earth model

    E-Print Network [OSTI]

    Boyer, Edmond

    Introduction Flattening the Earth Continuation procedure Flat Earth Numerical simulations Continuation from a flat to a round Earth model in the coplanar orbit transfer problem M. Cerf1, T. Haberkorn, SADCO 2011, March 2nd M. Cerf, T. Haberkorn, E. Tr´elat Continuation from a flat to a round Earth model

  17. Triode carbon nanotube field emission display using barrier rib structure and manufacturing method thereof

    DOE Patents [OSTI]

    Han, In-taek (Yongin, KR); Kim, Jong-min (Seongnam, KR)

    2003-01-01T23:59:59.000Z

    A triode carbon nanotube field emission display (FED) using a barrier rib structure and a manufacturing method thereof are provided. In a triode carbon nanotube FED employing barrier ribs, barrier ribs are formed on cathode lines by a screen printing method, a mesh structure is mounted on the barrier ribs, and a spacer is inserted between the barrier ribs through slots of the mesh structure, thereby stably fixing the mesh structure and the spacer within a FED panel due to support by the barrier ribs.

  18. Training for Emergencies Panel: Chris Reed

    E-Print Network [OSTI]

    Training for Emergencies Panel: Chris Reed Ben Berman Immanuel Barshi It's very important to have pilots sharing ideas with other instructor pilots. IB: In aviation there is a lot of mentor training. Instructor pilots are not trained trainers; they are aviators who are providing training. When things

  19. ROBOTIC DEVICE FOR CLEANING PHOTOVOLTAIC PANEL ARRAYS

    E-Print Network [OSTI]

    Mavroidis, Constantinos

    for the environmental impact of fossil fuels, implementation of eco-friendly energy sources like solar power are rising** Green Project ­ Sustainable Technology and Energy Solutions Ippokratous 38-42 & Irakleitou, 152 38. The main method for harnessing solar power is with arrays made up of photovoltaic (PV) panels. Accumulation

  20. Panel Data Econometric Models: Theory and Application

    E-Print Network [OSTI]

    Gao, Yichen

    2013-05-20T23:59:59.000Z

    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii 1. INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2. NONPARAMETRIC ESTIMATION OF FIXED EFFECTS PANEL DATA MODELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 Introduction....5 Conclusions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 3. IS HONG KONG DOLLAR OVERVALUED? EVIDENCE FROM HONG KONG?S TRADE PRICES POST FINANCIAL CRISIS . . . . . . . . . . 14 3.1 Introduction...

  1. Real time speech formant analyzer and display

    DOE Patents [OSTI]

    Holland, George E. (Ames, IA); Struve, Walter S. (Ames, IA); Homer, John F. (Ames, IA)

    1987-01-01T23:59:59.000Z

    A speech analyzer for interpretation of sound includes a sound input which converts the sound into a signal representing the sound. The signal is passed through a plurality of frequency pass filters to derive a plurality of frequency formants. These formants are converted to voltage signals by frequency-to-voltage converters and then are prepared for visual display in continuous real time. Parameters from the inputted sound are also derived and displayed. The display may then be interpreted by the user. The preferred embodiment includes a microprocessor which is interfaced with a television set for displaying of the sound formants. The microprocessor software enables the sound analyzer to present a variety of display modes for interpretive and therapeutic used by the user.

  2. Real time speech formant analyzer and display

    DOE Patents [OSTI]

    Holland, G.E.; Struve, W.S.; Homer, J.F.

    1987-02-03T23:59:59.000Z

    A speech analyzer for interpretation of sound includes a sound input which converts the sound into a signal representing the sound. The signal is passed through a plurality of frequency pass filters to derive a plurality of frequency formants. These formants are converted to voltage signals by frequency-to-voltage converters and then are prepared for visual display in continuous real time. Parameters from the inputted sound are also derived and displayed. The display may then be interpreted by the user. The preferred embodiment includes a microprocessor which is interfaced with a television set for displaying of the sound formants. The microprocessor software enables the sound analyzer to present a variety of display modes for interpretive and therapeutic used by the user. 19 figs.

  3. Pop Up! : A Novel Technology of Shape Display of 3D Objects Masashi Nakatani Hiroyuki Kajimoto Dairokou Sekighuchi Naoki Kawakami Susumu Tachi*1 *2 *3 *4 *5

    E-Print Network [OSTI]

    Tachi, Susumu

    visual depth information. Due to its dense arrangement and long range of movement, it can display large is similar to a children's "Pop up book," where a flat surface transforms into a 3D form. Each pixel-efficient as possible. To meet these challenges, we developed the following two core technical innovations. The first

  4. Geometrical Wake of a Smooth Flat Collimator

    SciTech Connect (OSTI)

    Stupakov, G.V.; /SLAC

    2011-09-09T23:59:59.000Z

    A transverse geometrical wake generated by a beam passing through a smooth flat collimator with a gradually varying gap between the upper and lower walls is considered. Based on generalization of the approach recently developed for a smooth circular taper we reduce the electromagnetic problem of the impedance calculation to the solution of two much simpler static problems - a magnetostatic and an electrostatic ones. The solution shows that in the limit of not very large frequencies, the impedance increases with the ratio h/d where h is the width and d is the distance between the collimating jaws. Numerical results are presented for the NLC Post Linac collimator.

  5. DHS Flat Stanley Project | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T,Office of Policy, OAPM | DepartmentI Office of ENERGY Science SLAC SiteDHS Flat

  6. Flat Ridge 2 | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualPropertyd8c-a9ae-f8521cbb8489 NoEuropeStrat.pdfInactive JumpFirst Wind (Formerly(RedirectedFlat

  7. Rocky Flats resumes shipments to WIPP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection TechnicalResonantNovember 15 toAdvancesRock Physics ofRocky Flats

  8. Solar panel manufacturing is greener in Europe than China, study...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The chart shows the number of years that a solar panel must operate in order to generate enough electricity to "pay back" the energy used to make the panel. Because there are fewer...

  9. Mechanical behavior of dip-brazed aluminum sandwich panels

    E-Print Network [OSTI]

    Hohmann, Brian P. (Brian Patrick)

    2007-01-01T23:59:59.000Z

    An experimental study was carried out to determine the mechanical behavior of sandwich panels containing cellular cores of varying shape. Compression and four point bend tests were performed on sandwich panels with square ...

  10. Journal of Materials Research http://journals.cambridge.org/JMR

    E-Print Network [OSTI]

    McCluskey, Matthew

    and heated freezer windows.8 A dom- inant market for TCOs is provided by flat-panel displays (TCOs) are currently used in products such as flat-panel displays. The prevailing n-type conductivity (ITO), as a transparent electrode. ITO is also used as the front contact in photovoltaic solar cells.9

  11. 2011 Minerals Yearbook U.S. Department of the Interior

    E-Print Network [OSTI]

    . ITO was principally used for electrically conductive purposes in a variety of flat-panel display by AIM Specialty Materials USA (Cranston, RI), Exotech Inc. (Pompano Beach, FL), ICA, 5N Plus Inc. (Saint with that of 2010 owing to increased demand for architectural glass and flat-panel displays, specifically high

  12. PHYSICAL REVIEW B 84, 035315 (2011) Theoretical analysis of the crystal structure, band-gap energy, polarization, and piezoelectric

    E-Print Network [OSTI]

    Alpay, S. Pamir

    2011-01-01T23:59:59.000Z

    have already been incorporated in flat panel displays and solar cells as transparent electrodesO can be tailored by alloying ZnO with BeO for applications such as electrodes in flat panel displays and solar cells, blue and ultraviolet (UV) light emitting devices, and highly sensitive UV detectors. We

  13. Bulk Phase Relations, Conductivity, and Transparency in Novel Bixbyite Transparent Conducting Oxide Solution in the

    E-Print Network [OSTI]

    Poeppelmeier, Kenneth R.

    /cm, mobilities of 28.3 cm2 /(V s), and carrier densities of 1.2 1021 .1 As areas increase in solar cells and flat electrodes in numerous applications such as photovoltaics, flat panel displays, heat reflective coatings panel displays, the electrode resistivity must decrease to prevent increased I2 R losses associated

  14. Electrical and Optical Properties of Transparent Conducting Homologous Compounds in the IndiumGalliumZinc Oxide System

    E-Print Network [OSTI]

    Poeppelmeier, Kenneth R.

    , smart windows, and solar cells. Tin-doped indium oxide (ITO) is the commercial TCO of choice. ITO thin TRANSPARENT conducting oxides (TCOs) are used in a wide variety of applications, such as flat-panel displays, and lower cost are desired for use in demanding ap- plications such as next-generation flat-panel displays

  15. Ductility of thin metal films on polymer substrates modulated by interfacial adhesion

    E-Print Network [OSTI]

    Suo, Zhigang

    (Crawford, 2005), other macroelectronic products include X-ray imagers, thin-film solar cells, and thin. Introduction Flat-panel displays are rapidly replacing cathode-ray tubes as the monitors of choice transistors and other micro-components are integrated over large areas. In addition to the flat-panel displays

  16. Assessment of the impact of large CRTs and flat panel monitors on productivity and quality in an insurance company

    E-Print Network [OSTI]

    Johnson, Michael Federico

    2006-04-12T23:59:59.000Z

    users most commonly experience back, neck, and shoulder musculoskeletal discomfort (Smith et al., 1981; Bendix et al., 1985; Evans, 1987; Hagberg and Wegman, 1987; Rossignol et al., 1987). Numerous studies have indicated that musculoskeletal...

  17. The new generation of Electronic Portal Imaging Devices (EPID) based on the a-Si flat panel

    E-Print Network [OSTI]

    Pouliot, Jean

    at the UCSF Cancer Center on a dual energy (6 & 18 MV) linac and clinical use and development of new

  18. Technical Note: Skin thickness measurements using high-resolution flat-panel cone-beam dedicated breast CT

    SciTech Connect (OSTI)

    Shi Linxi; Vedantham, Srinivasan; Karellas, Andrew [Department of Radiology, University of Massachusetts Medical School, Worcester, Massachusetts 01655 (United States); O'Connell, Avice M. [Department of Radiology, University of Rochester Medical Center, Rochester, New York 14642 (United States)

    2013-03-15T23:59:59.000Z

    Purpose: To determine the mean and range of location-averaged breast skin thickness using high-resolution dedicated breast CT for use in Monte Carlo-based estimation of normalized glandular dose coefficients. Methods: This study retrospectively analyzed image data from a clinical study investigating dedicated breast CT. An algorithm similar to that described by Huang et al.['The effect of skin thickness determined using breast CT on mammographic dosimetry,' Med. Phys. 35(4), 1199-1206 (2008)] was used to determine the skin thickness in 137 dedicated breast CT volumes from 136 women. The location-averaged mean breast skin thickness for each breast was estimated and the study population mean and range were determined. Pathology results were available for 132 women, and were used to investigate if the distribution of location-averaged mean breast skin thickness varied with pathology. The effect of surface fitting to account for breast curvature was also studied. Results: The study mean ({+-} interbreast SD) for breast skin thickness was 1.44 {+-} 0.25 mm (range: 0.87-2.34 mm), which was in excellent agreement with Huang et al. Based on pathology, pair-wise statistical analysis (Mann-Whitney test) indicated that at the 0.05 significance level, there were no significant difference in the location-averaged mean breast skin thickness distributions between the groups: benign vs malignant (p= 0.223), benign vs hyperplasia (p= 0.651), hyperplasia vs malignant (p= 0.229), and malignant vs nonmalignant (p= 0.172). Conclusions: Considering this study used a different clinical prototype system, and the study participants were from a different geographical location, the observed agreement between the two studies suggests that the choice of 1.45 mm thick skin layer comprising the epidermis and the dermis for breast dosimetry is appropriate. While some benign and malignant conditions could cause skin thickening, in this study cohort the location-averaged mean breast skin thickness distributions did not differ significantly with pathology. The study also underscored the importance of considering breast curvature in estimating breast skin thickness.

  19. Flat panel X-ray detector with reduced internal scattering for improved attenuation accuracy and dynamic range

    DOE Patents [OSTI]

    Smith, Peter D. (Santa Fe, NM); Claytor, Thomas N. (White Rock, NM); Berry, Phillip C. (Albuquerque, NM); Hills, Charles R. (Los Alamos, NM)

    2010-10-12T23:59:59.000Z

    An x-ray detector is disclosed that has had all unnecessary material removed from the x-ray beam path, and all of the remaining material in the beam path made as light and as low in atomic number as possible. The resulting detector is essentially transparent to x-rays and, thus, has greatly reduced internal scatter. The result of this is that x-ray attenuation data measured for the object under examination are much more accurate and have an increased dynamic range. The benefits of this improvement are that beam hardening corrections can be made accurately, that computed tomography reconstructions can be used for quantitative determination of material properties including density and atomic number, and that lower exposures may be possible as a result of the increased dynamic range.

  20. Evaluation of Effective Dose During Abdominal Three-Dimensional Imaging for Three Flat-Panel-Detector Angiography Systems

    SciTech Connect (OSTI)

    Suzuki, Shigeru, E-mail: shig.suz@gmail.com [Saitama Red Cross Hospital, Department of Radiology (Japan); Yamaguchi, Ichiro [National Institute of Public Health, Department of Environmental Health (Japan); Kidouchi, Takashi; Yamamoto, Asako [Teikyo University School of Medicine, Department of Radiology (Japan); Masumoto, Tomohiko [Tsukuba University Hospital, Department of Radiology (Japan); Ozaki, Yutaka [Juntendo University Nerima Hospital, Department of Radiology (Japan)

    2011-04-15T23:59:59.000Z

    The purpose of this study was to evaluate the effective dose during abdominal three-dimensional (3D) imaging on phantoms and estimate the dose-area product (DAP) for effective dose conversion factors for three types of angiographic units. Three-dimensional imaging was performed for three sizes (small, medium, large) of human-shaped phantoms using three types of angiographic units (Allura Xper FD20/10, INNOVA 4100, AXIOM Artis dTA). We calculated 25 organ doses and effective doses using Monte Carlo technique for the three phantoms with a program for a personal computer. As benchmark studies to back up the results by Monte Carlo technique, we measured the organ doses directly on the small phantom using radiophotoluminescent glass dosimeters. The DAP value increased as the phantom size increased. The organ doses and the effective doses during the 3D imaging increased as the phantom size increased. The effective doses for the small phantom by Monte Carlo technique were 1.9, 2.2, and 2.1 mSv for the Allura Xper FD20/10, INNOVA 4100, and AXIOM Artis dTA, respectively, while those by direct measurement were 1.6, 2.0, and 2.6 mSv. The effective doses to DAP ratios by Monte Carlo technique were 0.37-0.45, 0.26-0.32, and 0.13-0.15 (mSv Gy{sup -1}cm{sup -2}) for the Allura Xper FD20/10, INNOVA 4100, and AXIOM Artis dTA, respectively. In conclusion, the effective doses during 3D imaging and the dose-to-DAP ratios differ among angiographic units, and the effective dose can be estimated using a proper conversion factor for each angiographic unit.

  1. PUBLISHED ONLINE: 1 MAY 2011 | DOI: 10.1038/NMAT3013 High-performance flat-panel solar thermoelectric

    E-Print Network [OSTI]

    Huang, Jianyu

    by mechanical heat engines in large power plants, and household heat supply by means of solar hot-water systems

  2. EXPERIMENTAL TESTING OF TWO SOLAR PANEL SIMULATIONS Krisztina Leban

    E-Print Network [OSTI]

    Ritchie, Ewen

    EXPERIMENTAL TESTING OF TWO SOLAR PANEL SIMULATIONS Krisztina Leban Institute of Energy Technology solar panel for varying temperature and irradiance. Final validation was done by comparing experimental are a renewable, non-polluting source of energy that are increasingly used for hybrid (solar panels and grid

  3. Peer Effects in the Diffusion of Solar Photovoltaic Panels

    E-Print Network [OSTI]

    Lee, Daeyeol

    Peer Effects in the Diffusion of Solar Photovoltaic Panels Bryan Bollinger NYU Stern School base of consumers in the reference group. We study the diffusion of solar photovoltaic panels of an environmentally beneficial technology, solar photovoltaic (PV) panels. Policymakers are particularly interested

  4. NO. REV. MO EASEP SOLAR PANEL OCCULTAT ION

    E-Print Network [OSTI]

    Rathbun, Julie A.

    ., : :. I · ' NO. REV. MO· EATM-59 EASEP SOLAR PANEL OCCULTAT ION PAGE l OF 9 DATE 24 Feb 1969 ()i~ ~ .I /1'1 . ! I Prepared by:~ ~Wallack . 11 ''--'/ ~~~ #12;: : .. EASEP SOLAR PANEL OCCULTATION. EATM-59 PAGE 2 OF 9 DATE 24 Feb I969 #12;NO. RIV. NO. : : .~ EASEP Solar Panel Occultation EATM-59 PAGI

  5. Chemical technology news from across RSC Publishing. Printing solar panels

    E-Print Network [OSTI]

    Rogers, John A.

    Publishing Chemical technology news from across RSC Publishing. Printing solar panels 22 January size) silicon microcells that connect together to form flexible solar panels. By stamping hundreds solar panels 2/8/2010http://www.rsc.org/Publishing/ChemTech/Volume/2010/02/printing_solar.asp #12;Page 2

  6. Ghost condensate model of flat rotation curves

    E-Print Network [OSTI]

    V. V. Kiselev

    2005-07-29T23:59:59.000Z

    An effective action of ghost condensate with higher derivatives creates a source of gravity and mimics a dark matter in spiral galaxies. We present a spherically symmetric static solution of Einstein--Hilbert equations with the ghost condensate at large distances, where flat rotation curves are reproduced in leading order over small ratio of two energy scales characterizing constant temporal and spatial derivatives of ghost field: $\\mu_*^2$ and $\\mu_\\star^2$, respectively, with a hierarchy $\\mu_\\star\\ll \\mu_*$. We assume that a mechanism of hierarchy is provided by a global monopole in the center of galaxy. An estimate based on the solution and observed velocities of rotations in the asymptotic region of flatness, gives $\\mu_*\\sim 10^{19}$ GeV and the monopole scale in a GUT range $\\mu_\\star\\sim 10^{16}$ GeV, while a velocity of rotation $v_0$ is determined by the ratio: $ \\sqrt{2} v_0^2= \\mu_\\star^2/\\mu_*^2$. A critical acceleration is introduced and naturally evaluated of the order of Hubble rate, that represents the Milgrom's acceleration.

  7. Risk, media, and stigma at Rocky Flats

    SciTech Connect (OSTI)

    Flynn, J.; Peters, E.; Mertz, C.K.; Slovic, P. [Decision Research, Eugene, OR (United States)] [Decision Research, Eugene, OR (United States)

    1998-12-01T23:59:59.000Z

    Public responses to nuclear technologies are often strongly negative. Events, such as accidents or evidence of unsafe conditions at nuclear facilities, receive extensive and dramatic coverage by the news media. These news stories affect public perceptions of nuclear risks and the geographic areas near nuclear facilities. One result of these perceptions, avoidance behavior, is a form of technological stigma that leads to losses in property values near nuclear facilities. The social amplification of risk is a conceptual framework that attempts to explain how stigma is created through media transmission of information about hazardous places and public perceptions and decisions. This paper examines stigma associated with the US Department of energy`s Rocky Flats facility, a major production plant in the nation`s nuclear weapons complex, located near Denver, Colorado. This study, based upon newspaper analyses and a survey of Denver area residents, finds that the social amplification theory provides a reasonable framework for understanding the events and public responses that took place in regard to Rocky Flats during a 6-year period, beginning with an FBI raid of the facility in 1989.

  8. A CMOS-compatible compact display

    E-Print Network [OSTI]

    Chen, Andrew R. (Andrew Raymond)

    2005-01-01T23:59:59.000Z

    Portable information devices demand displays with high resolution and high image quality that are increasingly compact and energy-efficient. Microdisplays consisting of a silicon CMOS backplane integrated with light ...

  9. Image fusion for a nighttime driving display

    E-Print Network [OSTI]

    Herrington, William Frederick

    2005-01-01T23:59:59.000Z

    An investigation into image fusion for a nighttime driving display application was performed. Most of the image fusion techniques being investigated in this application were developed for other purposes. When comparing the ...

  10. Bexar County Parking Garage Photovoltaic Panels

    SciTech Connect (OSTI)

    Golda Weir

    2012-01-23T23:59:59.000Z

    The main objective of the Bexar County Parking Garage Photovoltaic (PV) Panel project is to install a PV System that will promote the use of renewable energy. This project will also help sustain Bexar County ongoing greenhouse gas emissions reduction and energy efficiency goals. The scope of this project includes the installation of a 100-kW system on the top level of a new 236,285 square feet parking garage. The PV system consists of 420 solar panels that covers 7,200 square feet and is tied into the electric-grid. It provides electricity to the office area located within the garage. The estimated annual electricity production of the PV system is 147,000 kWh per year.

  11. Beacon data acquisition and display system

    DOE Patents [OSTI]

    Skogmo, D.G.; Black, B.D.

    1991-12-17T23:59:59.000Z

    A system for transmitting aircraft beacon information received by a secondary surveillance radar through telephone lines to a remote display includes a digitizer connected to the radar for preparing a serial file of data records containing position and identification information of the beacons detected by each sweep of the radar. This information is transmitted through the telephone lines to a remote computer where it is displayed. 6 figures.

  12. Input to Priorities Panel August 7, 2012

    E-Print Network [OSTI]

    Input to Priorities Panel August 7, 2012 Jeff Freidberg MIT 1 #12;The Emperor of Fusion has · Comparison (1 GW overnight cost) · Coal $ 3B · Gas $ 1B · Nuclear $ 4B · Wind $ 2B · Solar-T $ 3B · ITER $25B option · Tough MHD, heating, current drive, transport · I doubt it will achieve its mission · Still

  13. Endogenous contagion – a panel data analysis

    E-Print Network [OSTI]

    Baur, Dirk; Fry, Renee

    2006-01-01T23:59:59.000Z

    of the figure presents the coefficient estimates, and the second panel presents the t-value associated with each estimate along with the corresponding 99 percent critical values. Inspection of this figure shows evidence of joint contagion across all eleven... countries for equity returns in four clear episodes as measured by their significance at the 99 percent level. When contagion is evident, the parameter estimates of the fixed time effects are generally large in absolute terms, and tend to cluster...

  14. Thermal resistance of composite panels containing superinsulation and urethane foam

    SciTech Connect (OSTI)

    Wilkes, K.E.; Graves, R.S.; Childs, K.W.

    1996-09-01T23:59:59.000Z

    Laboratory data are presented on the thermal resistance of composite panels that incorporate superinsulation embedded in urethane foam. Composite panels were fabricated using four types of advanced insulations (three types of evacuated panel superinsulation and one type of gas-filled panel), and three foam blowing agents (CFC-11, HCFC-141b, and HCFC-142b/22 blend). Panels were also fabricated with only the urethane foam to serve as a baseline. Thermal measurements were performed using an ASTM C 518 Heat Flow Meter Apparatus. The thermal resistances of the panels were measured over a two-year period to detect whether any significant changes occurred. A computer model was used to analyze the data, adjusting for differences in size of the advanced insulations, and extrapolating to different sizes of composite panels.

  15. Thermal resistance of superinsulation/foam composite panels

    SciTech Connect (OSTI)

    Wilkes, K.E.; Graves, R.S.; Childs, K.W.

    1996-05-01T23:59:59.000Z

    Laboratory data are presented on the thermal resistance of composite panels that incorporate superinsulation embedded in urethane foam. Composite panels were fabricated using four types of advanced insulations (three types of evacuated panel superinsulation and one type of gas-filled panel), and three foam blowing agents (CFC-11, HCFC-141b, and HCFC-142b/22 blend). Panels were also fabricated with only the urethane foam to serve as a baseline. Thermal measurements were performed using an ASTM C 518 Heat Flow Meter Apparatus. The thermal resistances of the panels were measured over a two-year period to detect whether any significant changes occurred. A computer model was used to analyze the data, normalizing for differences in size of the advanced insulations, and extrapolating to different sizes of composite panels.

  16. flats for rent 2 | 3 How to find private

    E-Print Network [OSTI]

    Painter, Kevin

    .lettingweb.com/student-flats-heriot-watt-university www.citylets.co.uk www.landlordaccreditationscotland.com www.espc.com www.rightmove.co.uk www

  17. EIS-0276: Rocky Flats Plutonium Storage, Golden, Colorado

    Broader source: Energy.gov [DOE]

    This EIS analyzes DOE's proposed action to provide safe interim storage of approximately 10 metric tons of plutonium at the Rocky Flats Environmental Technology Site (RFETS).

  18. 2006 Annual Ecology Report for the Rocky Flats Site

    Office of Legacy Management (LM)

    Ecology Report for the Rocky Flats Site Click on the links below to access different portions of the electronic annual report. 2006 Annual Report Sections Diffuse Knapweed...

  19. Creation of a U.S. Phosphorescent OLED Lighting Panel Manufacturing Facility

    SciTech Connect (OSTI)

    Hack, Michael

    2013-09-30T23:59:59.000Z

    Universal Display Corporation (UDC) has pioneered high efficacy phosphorescent OLED (PHOLED™) technology to enable the realization of an exciting new form of high quality, energy saving solid-date lighting. In laboratory test devices, we have demonstrated greater than 100 lm/W conversion efficacy. In this program, Universal Display will demonstrate the scalability of its proprietary UniversalPHOLED technology and materials for the manufacture of white OLED lighting panels that meet commercial lighting targets. Moser Baer Technologies will design and build a U.S.- based pilot facility. The objective of this project is to establish a pilot phosphorescent OLED (PHOLED) manufacturing line in the U.S. Our goal is that at the end of the project, prototype lighting panels could be provided to U.S. luminaire manufacturers for incorporation into products to facilitate the testing of design concepts and to gauge customer acceptance, so as to facilitate the growth of the embryonic U.S. OLED lighting industry. In addition, the team will provide a cost of ownership analysis to quantify production costs including OLED performance metrics which relate to OLED cost such as yield, materials usage, cycle time, substrate area, and capital depreciation. This project was part of a new DOE initiative designed to help establish and maintain U.S. leadership in this program will support key DOE objectives by showing a path to meet Department of Energy Solid-State Lighting Manufacturing Roadmap cost targets, as well as meeting its efficiency targets by demonstrating the energy saving potential of our technology through the realization of greater than 76 lm/W OLED lighting panels by 2012.

  20. Thermal imaging and air-coupled ultrasound characterization of a continuous-fiber ceramic composite panels.

    SciTech Connect (OSTI)

    Sun, J. G.; Easler, T. E.; Szweda, A.; Pillai, T. A. K.; Deemer, C.; Ellingson, W. A.

    1998-04-01T23:59:59.000Z

    SYLRAMIC{trademark} continuous fiber ceramic-matrix composites (Nicalon{trademark} fiber/SiNC matrix) were fabricated by Dow Corning Corporation with the polymer-impregnation and pyrolysis (PIP) process. The composite microstructure and its uniformity, and the completeness of infiltration during processing were studied as a function of number of PIP cycles. Two nondestructive evaluation (NDE) methods, i.e., infrared thermal imaging and air-coupled ultrasound (UT), were used to investigate flat composite panels of two thicknesses and various sizes. The thermal imaging method provided two-dimensional (2D) images of through-thickness thermal diffusivity distributions, and the air-coupled UT method provided 2D images of through-thickness ultrasonic transmission of the panel components. Results from both types of NDEs were compared at various PIP cycles during fabrication of the composites. A delaminated region was clearly detected and its progressive repair was monitored during processing. The NDE data were also correlated to results obtained from destructive characterization.

  1. INVENTORY FOR ELGAR COURT FLAT NO. BLOCK NO. ROOM NO.

    E-Print Network [OSTI]

    Birmingham, University of

    INVENTORY FOR ELGAR COURT FLAT NO. BLOCK NO. ROOM NO. Staff on the Vale Village try to ensure and cleaned to a high standard. Please make sure that you complete this inventory and note down anything which seat x 1 Toilet roll holder x 1 INVENTORY FOR SHACKLETON FLAT NO: BLOCK NO: ROOM NO: NAME: TELEPHONE

  2. INVENTORY FOR ELGAR COURT FLAT NO. BLOCK NO. ROOM NO.

    E-Print Network [OSTI]

    Birmingham, University of

    INVENTORY FOR ELGAR COURT FLAT NO. BLOCK NO. ROOM NO. Staff on the Vale Village try to ensure and cleaned to a high standard. Please make sure that you complete this inventory and note down anything which Toilet seat x 1 Toilet roll holder x 1 INVENTORY FOR MASON FLAT NO: BLOCK NO: ROOM NO: NAME: TELEPHONE

  3. INVENTORY FOR ELGAR COURT FLAT NO. BLOCK NO. ROOM NO.

    E-Print Network [OSTI]

    Birmingham, University of

    INVENTORY FOR ELGAR COURT FLAT NO. BLOCK NO. ROOM NO. Staff on the Vale Village try to ensure and cleaned to a high standard. Please make sure that you complete this inventory and note down anything which holder x 1 INVENTORY FOR TENNIS COURT BLOCK NO: FLAT NO: ROOM NO: NAME: TELEPHONE EXT. NO: #12;How

  4. INVENTORY FOR ELGAR COURT FLAT NO. BLOCK NO. ROOM NO.

    E-Print Network [OSTI]

    Birmingham, University of

    INVENTORY FOR ELGAR COURT FLAT NO. BLOCK NO. ROOM NO. Staff on the Vale Village try to ensure and cleaned to a high standard. Please make sure that you complete this inventory and note down anything which Toilet seat x 1 Toilet roll holder x 1 INVENTORY FOR ELGAR COURT FLAT NO: BLOCK NO: ROOM NO: NAME

  5. INVENTORY FOR ELGAR COURT FLAT NO. BLOCK NO. ROOM NO.

    E-Print Network [OSTI]

    Birmingham, University of

    INVENTORY FOR ELGAR COURT FLAT NO. BLOCK NO. ROOM NO. Staff on the Vale Village try to ensure and cleaned to a high standard. Please make sure that you complete this inventory and note down anything which rail x 1 INVENTORY FOR MAPLE BANK FLAT NO: BLOCK NO: ROOM NO: NAME: TELEPHONE EXT. NO: #12;How

  6. New Refrigerant Boosts Energy Efficiency of Supermarket Display...

    Energy Savers [EERE]

    New Refrigerant Boosts Energy Efficiency of Supermarket Display Cases New Refrigerant Boosts Energy Efficiency of Supermarket Display Cases February 20, 2015 - 4:55pm Addthis New...

  7. alternative graphical displays: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Graphical User Interfaces on OLED Displays CiteSeer Summary: Emerging organic light-emitting diode (OLED)-based displays obviate external lighting; and consume drastically...

  8. Method for molding threads in graphite panels

    DOE Patents [OSTI]

    Short, W.W.; Spencer, C.

    1994-11-29T23:59:59.000Z

    A graphite panel with a hole having a damaged thread is repaired by drilling the hole to remove all of the thread and making a new hole of larger diameter. A bolt with a lubricated thread is placed in the new hole and the hole is packed with graphite cement to fill the hole and the thread on the bolt. The graphite cement is cured, and the bolt is unscrewed therefrom to leave a thread in the cement which is at least as strong as that of the original thread. 8 figures.

  9. Method for molding threads in graphite panels

    DOE Patents [OSTI]

    Short, William W. (Livermore, CA); Spencer, Cecil (Silverton, OR)

    1994-01-01T23:59:59.000Z

    A graphite panel (10) with a hole (11) having a damaged thread (12) is repaired by drilling the hole (11) to remove all of the thread and make a new hole (13) of larger diameter. A bolt (14) with a lubricated thread (17) is placed in the new hole (13) and the hole (13) is packed with graphite cement (16) to fill the hole and the thread on the bolt. The graphite cement (16) is cured, and the bolt is unscrewed therefrom to leave a thread (20) in the cement (16) which is at least as strong as that of the original thread (12).

  10. Solar Panels Plus LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro Industries Pvt LtdShawangunk, NewSingapore Jump to: navigation,Panels Plus LLC Jump to:

  11. Panel Discussion | OpenEI Community

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluatingGroup |JilinLuOpenNorthOlympiaAnalysis) JumpPalcan s JVCo | OpenPanel

  12. Commercial Decommissioning at DOE's Rocky Flats

    SciTech Connect (OSTI)

    Freiboth, C.; Sandlin, N.; Schubert, A.; Hansen, S.

    2002-02-25T23:59:59.000Z

    Due in large part to the number of nuclear facilities that make up the DOE complex, DOE-EM work has historically been paperwork intensive and driven by extensive regulations. Requirements for non-nuclear facilities are often grouped with those of nuclear facilities, driving up costs. Kaiser-Hill was interested in applying a commercial model to demolition of these facilities and wanted to apply necessary and sufficient standards to the work activities, but avoid applying unnecessary requirements. Faced with demolishing hundreds of uncontaminated or non-radiologically contaminated facilities, Kaiser-Hill has developed a subcontracting strategy to drastically reduce the cost of demolishing these facilities at Rocky Flats. Aiming to tailor the demolition approach of such facilities to more closely follow commercial practices, Kaiser-Hill recently released a Request for Proposals (RFP) for the demolition of the site's former central administration facility. The RFP significantly reduced requirements for compliance with specific DOE directives. Instead, the RFP required subcontractors to comply with health and safety requirements commonly found in the demolition of similar facilities in a commercial setting. This resulted in a number of bids from companies who have normally not bid on DOE work previously and at a reduced cost over previous approaches. This paper will discuss the details of this subcontracting strategy.

  13. The Critical Mass Laboratory at Rocky Flats

    SciTech Connect (OSTI)

    Rothe, Robert E

    2003-10-15T23:59:59.000Z

    The Critical Mass Laboratory (CML) at Rocky Flats northwest of Denver, Colorado, was built in 1964 and commissioned to conduct nuclear experiments on January 28, 1965. It was built to attain more accurate and precise experimental data to ensure nuclear criticality safety at the plant than were previously possible. Prior to its construction, safety data were obtained from long extrapolations of subcritical data (called in situ experiments), calculated parameters from reactor engineering 'models', and a few other imprecise methods. About 1700 critical and critical-approach experiments involving several chemical forms of enriched uranium and plutonium were performed between then and 1988. These experiments included single units and arrays of fissile materials, reflected and 'bare' systems, and configurations with various degrees of moderation, as well as some containing strong neutron absorbers. In 1989, a raid by the Federal Bureau of Investigation (FBI) caused the plant as a whole to focus on 'resumption' instead of further criticality safety experiments. Though either not recognized or not admitted for a few years, that FBI raid did sound the death knell for the CML. The plant's optimistic goal of resumption evolved to one of deactivation, decommissioning, and plantwide demolition during the 1990s. The once-proud CML facility was finally demolished in April of 2002.

  14. adult treatment panel: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    collapse, this point became significant on the health care reform agenda. A drastic reduction5th ECPR General Conference, Potsdam, 10-12 September 2009 Panel: Rescaling Health...

  15. Utilization of localized panel resonant behavior in wind turbine blades.

    SciTech Connect (OSTI)

    Griffith, Daniel Todd

    2010-11-01T23:59:59.000Z

    The shear webs and laminates of core panels of wind turbine blades must be designed to avoid panel buckling while minimizing blade weight. Typically, buckling resistance is evaluated by consideration of the load-deflection behavior of a blade using finite element analysis (FEA) or full-scale static loading of a blade to failure under a simulated extreme loading condition. This paper examines an alternative means for evaluating blade buckling resistance using non-destructive modal tests or FEA. In addition, panel resonances can be utilized for structural health monitoring by observing changes in the modal parameters of these panel resonances, which are only active in a portion of the blade that is susceptible to failure. Additionally, panel resonances are considered for updating of panel laminate model parameters by correlation with test data. During blade modal tests conducted at Sandia Labs, a series of panel modes with increasing complexity was observed. This paper reports on the findings of these tests, describes potential ways to utilize panel resonances for blade evaluation, health monitoring, and design, and reports recent numerical results to evaluate panel resonances for use in blade structural health assessment.

  16. ADVANCED REFLECTIVE FILMS AND PANELS FOR NEXT GENERATION SOLAR...

    Broader source: Energy.gov (indexed) [DOE]

    film based panel -formed at high accuracy (<1.5 mrad RMS slope error) Adaptive optics (minimizes canting errors) Space frame based support structure Operation and...

  17. City and County of Denver- Solar Panel Permitting (Colorado)

    Broader source: Energy.gov [DOE]

    Construction, Electrical, Plumbing and Zoning Permits* are required for Photovoltaic (PV) systems installed in the city of Denver. Denver provides same day permit review for most solar panel...

  18. Session 6 - Environmentally Concerned Public Sector Panel Discussion...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    "The Light-Duty Diesel In America?" Session 6 - Environmentally Concerned Public Sector Panel Discussion "The Light-Duty Diesel In America?" 2003 DEER Conference...

  19. Effects of solar photovoltaic panels on roof heat transfer

    E-Print Network [OSTI]

    Dominguez, Anthony; Kleissl, Jan; Luvall, Jeffrey C

    2011-01-01T23:59:59.000Z

    the energy performance of  photovoltaic roofs, ASHRAE Trans A thermal model for photovoltaic systems, Solar Energy, Effects of Solar Photovoltaic Panels on Roof Heat Transfer 

  20. "PBS NEWSHOUR" covers new technique that may make solar panel...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Scientists have developed a more efficient method of creating the material that makes solar panels work, according to a report published this week, which researchers say could...

  1. FPGA Implementation of Multilayer Perceptron for Modeling of Photovoltaic panel

    SciTech Connect (OSTI)

    Mekki, H.; Belhout, K. [Department of Electronics, RASIC laboratory BLIDA UniversityBLIDA (Algeria); Mellit, A.; Salhi, H. [Department of Electronics, Control laboratory BLIDA UniversityBLIDA (Algeria)

    2008-06-12T23:59:59.000Z

    The Number of electronic applications using artificial neural network-based solutions has increased considerably in the last few years. However, their applications in photovoltaic systems are very limited. This paper introduces the preliminary result of the modeling and simulation of photovoltaic panel based on neural network and VHDL-language. In fact, an experimental database of meteorological data (irradiation, temperature) and output electrical generation signals of the PV-panel (current and voltage) has been used in this study. The inputs of the ANN-PV-panel are the daily total irradiation and mean average temperature while the outputs are the current and voltage generated from the panel. Firstly, a dataset of 4x364 have been used for training the network. Subsequently, the neural network (MLP) corresponding to PV-panel is simulated using VHDL language based on the saved weights and bias of the network. Simulation results of the trained MLP-PV panel based on Matlab and VHDL are presented. The proposed PV-panel model based ANN and VHDL permit to evaluate the performance PV-panel using only the environmental factors and involves less computational efforts, and it can be used for predicting the output electrical energy from the PV-panel.

  2. Study of Alternative Approaches for Transite Panel Removal

    Broader source: Energy.gov [DOE]

    Bechtel Jacobs Company LLC (BJC) assembled an experienced team from both sites to evaluate both the manual and mechanical methods of transite panel removal.

  3. An overview of the gate and panel industry

    E-Print Network [OSTI]

    Fisher, C. West

    2000-01-01T23:59:59.000Z

    OF CONTENTS I. Introduction II. Market Review lll Critical Factors IV. Gate and Panel Fvaluation A Table 1. Light Duty Gate B. Table 2. Medium Duty Gate C. Table 3. Heavy Duty Gate D. Table 4 Light Duty Panel B Table 5. Medium Duty Panel R Table 6... of their cost and convience. MARKET REVIEW There are a multitude of companies that manufacture portable handling facilities from the basic panel components to complete corral layouts. Just like with cattle breeds, there are a wide variety of manufactured...

  4. Compact x-ray source and panel

    DOE Patents [OSTI]

    Sampayon, Stephen E. (Manteca, CA)

    2008-02-12T23:59:59.000Z

    A compact, self-contained x-ray source, and a compact x-ray source panel having a plurality of such x-ray sources arranged in a preferably broad-area pixelized array. Each x-ray source includes an electron source for producing an electron beam, an x-ray conversion target, and a multilayer insulator separating the electron source and the x-ray conversion target from each other. The multi-layer insulator preferably has a cylindrical configuration with a plurality of alternating insulator and conductor layers surrounding an acceleration channel leading from the electron source to the x-ray conversion target. A power source is connected to each x-ray source of the array to produce an accelerating gradient between the electron source and x-ray conversion target in any one or more of the x-ray sources independent of other x-ray sources in the array, so as to accelerate an electron beam towards the x-ray conversion target. The multilayer insulator enables relatively short separation distances between the electron source and the x-ray conversion target so that a thin panel is possible for compactness. This is due to the ability of the plurality of alternating insulator and conductor layers of the multilayer insulators to resist surface flashover when sufficiently high acceleration energies necessary for x-ray generation are supplied by the power source to the x-ray sources.

  5. Dual circuit embossed sheet heat transfer panel

    DOE Patents [OSTI]

    Morgan, G.D.

    1984-02-21T23:59:59.000Z

    A heat transfer panel provides redundant cooling for fusion reactors or the like environment requiring low-mass construction. Redundant cooling is provided by two independent cooling circuits, each circuit consisting of a series of channels joined to inlet and outlet headers. The panel comprises a welded joinder of two full-size and two much smaller partial-size sheets. The first full-size sheet is embossed to form first portions of channels for the first and second circuits, as well as a header for the first circuit. The second full-sized sheet is then laid over and welded to the first full-size sheet. The first and second partial-size sheets are then overlaid on separate portions of the second full-sized sheet, and are welded thereto. The first and second partial-sized sheets are embossed to form inlet and outlet headers, which communicate with channels of the second circuit through apertures formed in the second full-sized sheet. 6 figs.

  6. Solar panels as cosmic-ray detectors

    E-Print Network [OSTI]

    Stella, Carlo; Assis, Pedro; Brogueira, Pedro; Santo, Catarina Espirito; Goncalves, Patricia; Pimenta, Mario; De Angelis, Alessandro

    2014-01-01T23:59:59.000Z

    Due to fundamental limitations of accelerators, only cosmic rays can give access to centre-of- mass energies more than one order of magnitude above those reached at the LHC. In fact, extreme energy cosmic rays (1018 eV - 1020 eV) are the only possibility to explore the 100 TeV energy scale in the years to come. This leap by one order of magnitude gives a unique way to open new horizons: new families of particles, new physics scales, in-depth investigations of the Lorentz symmetries. However, the flux of cosmic rays decreases rapidly, being less than one particle per square kilometer per year above 1019 eV: one needs to sample large surfaces. A way to develop large-effective area, low cost, detectors, is to build a solar panel-based device which can be used in parallel for power generation and Cherenkov light detection. Using solar panels for Cherenkov light detection would combine power generation and a non-standard detection device.

  7. Image display device in digital TV

    DOE Patents [OSTI]

    Choi, Seung Jong (Seoul, KR)

    2006-07-18T23:59:59.000Z

    Disclosed is an image display device in a digital TV that is capable of carrying out the conversion into various kinds of resolution by using single bit map data in the digital TV. The image display device includes: a data processing part for executing bit map conversion, compression, restoration and format-conversion for text data; a memory for storing the bit map data obtained according to the bit map conversion and compression in the data processing part and image data inputted from an arbitrary receiving part, the receiving part receiving one of digital image data and analog image data; an image outputting part for reading the image data from the memory; and a display processing part for mixing the image data read from the image outputting part and the bit map data converted in format from the a data processing part. Therefore, the image display device according to the present invention can convert text data in such a manner as to correspond with various resolution, carry out the compression for bit map data, thereby reducing the memory space, and support text data of an HTML format, thereby providing the image with the text data of various shapes.

  8. LED Light Sources for Projection Display Applications

    E-Print Network [OSTI]

    Palffy-Muhoray, Peter

    LED Light Sources for Projection Display Applications By Chenhui Peng 04-13-2012 #12;Outline · 1. · The first practical LED is in red color and it is made with gallium arsenide (GaAs). 4http://en.wikipedia.org/wiki/Light with holes and release energy in the form of photons. 5http://en.wikipedia.org/wiki/Light-emitting_diode #12

  9. Chern-Simons classes of flat connections on supermanifolds

    E-Print Network [OSTI]

    JN Iyer; Un Iyer

    2007-07-16T23:59:59.000Z

    In this note we define Chern-Simons classes of a superconnection $D+L$ on a complex supervector bundle $E$ such that $D$ is flat and preserves the grading, and $L$ is an odd endomorphism of $E$ on a supermanifold. As an application we obtain a definition of Chern-Simons classes of a (not necessarily flat) morphism between flat vector bundles on a smooth manifold. We extend Reznikov's theorem on triviality of these classes when the manifold is a compact K\\"ahler manifold or a smooth complex quasi--projective variety, in degrees > 1.

  10. Chern-Simons classes of flat connections on supermanifolds

    E-Print Network [OSTI]

    Iyer, JN

    2007-01-01T23:59:59.000Z

    In this note we define Chern-Simons classes of a superconnection $D+L$ on a complex supervector bundle $E$ such that $D$ is flat and preserves the grading, and $L$ is an odd endomorphism of $E$ on a supermanifold. As an application we obtain a definition of Chern-Simons classes of a (not necessarily flat) morphism between flat vector bundles on a smooth manifold. We extend Reznikov's theorem on triviality of these classes when the manifold is a compact K\\"ahler manifold or a smooth complex quasi--projective variety, in degrees > 1.

  11. Intelligent head-down display design for the smart cockpit

    E-Print Network [OSTI]

    Branham, Paul Anthony

    1998-01-01T23:59:59.000Z

    ) Display Mode . . . . . . . . . . . . . . . . . . . . 13 Moving Map Symbology Set. 14 Automatic Scaling Flowchart 15 Check Lists (CHCK LSTS) Display Mode 16 Training (TRNG) Display Mode. 17 Built-in Self Test (BIT) Display Mode. 18 GAPATS Executive...), and other NavAids, with the plane's current location represented on the screen by an icon. ~ Flight Planning - A standardized display format is used which permits the pilot to quickly enter data in a logical order, generally corresponding with an FAA...

  12. Flat plate puncture test convergence study.

    SciTech Connect (OSTI)

    Snow, Spencer (Idaho National Laboratories); Ammerman, Douglas James; Molitoris, David (Westinghouse); Tso, Chi-Fung (ARUP); Yaksh, Mike (NAC International)

    2010-10-01T23:59:59.000Z

    The ASME Task Group on Computational Mechanics for Explicit Dynamics is investigating the types of finite element models needed to accurately solve various problems that occur frequently in cask design. One type of problem is the 1-meter impact onto a puncture spike. The work described in this paper considers this impact for a relatively thin-walled shell, represented as a flat plate. The effects of mesh refinement, friction coefficient, material models, and finite element code will be discussed. The actual punch, as defined in the transport regulations, is 15 cm in diameter with a corner radius of no more than 6 mm. The punch used in the initial part of this study has the same diameter, but has a corner radius of 25 mm. This more rounded punch was used to allow convergence of the solution with a coarser mesh. A future task will be to investigate the effect of having a punch with a smaller corner radius. The 25-cm thick type 304 stainless steel plate that represents the cask wall is 1 meter in diameter and has added mass on the edge to represent the remainder of the cask. The amount of added mass to use was calculated using Nelm's equation, an empirically derived relationship between weight, wall thickness, and ultimate strength that prevents punch through. The outer edge of the plate is restrained so that it can only move in the direction parallel to the axis of the punch. Results that are compared include the deflection at the edge of the plate, the deflection at the center of the plate, the plastic strains at radius r=50 cm and r=100 cm , and qualitatively, the distribution of plastic strains. The strains of interest are those on the surface of the plate, not the integration point strains. Because cask designers are using analyses of this type to determine if shell will puncture, a failure theory, including the effect of the tri-axial nature of the stress state, is also discussed. The results of this study will help to determine what constitutes an adequate finite element model for analyzing the puncture hypothetical accident.

  13. MEASUREMENT OF MIRROR PANELS USING COLOURED PATTERN DEFLECTOMETRY

    E-Print Network [OSTI]

    and parabolic dish solar concentrators. Factory production of mirror panels also requires accurate measurementsMEASUREMENT OF MIRROR PANELS USING COLOURED PATTERN DEFLECTOMETRY Paul M. Scott1 , and Greg Burgess2 1 Research Assistant, Solar Thermal Group, Australian National University (ANU), Building 32 North

  14. Solar panels are cost intensive, have limitations with respect to

    E-Print Network [OSTI]

    Langendoen, Koen

    Solar panels are cost intensive, have limitations with respect to where they can be integrated to a building as solar panels on a roof or facades are. Ref. TU Delft OCT-13-022 TU Delft / Valorisation Centre of the window, integrated in the window frames, strip-shaped CIGS PV solar cells convert the light

  15. 2007 Water Resources Advisory Panel By Jessica Harder

    E-Print Network [OSTI]

    Nebraska-Lincoln, University of

    the potential benefits with the negative ramifications of tree harvesting, and ultimately will result in a basin. Maximizing the effectiveness of precipitation can substantially increase the availability of water and water2007 Water Resources Advisory Panel Update By Jessica Harder The Water Resources Advisory Panel

  16. Security Issues in Data Warehousing and Data Mining: Panel Discussion

    E-Print Network [OSTI]

    Lin, Tsau Young

    and mining. Position by Linda Schlipper For most enterprises there is no shortage of data. Operational dataSecurity Issues in Data Warehousing and Data Mining: Panel Discussion Bhavani Thuraisingham Corporation Abstract This paper describes the panel discussion on data warehousing, data mining and security

  17. Seismic rehabilitation of a reinforced concrete flat-slab structure 

    E-Print Network [OSTI]

    Jimenez, Laila Margarita

    1999-01-01T23:59:59.000Z

    The effectiveness of seismic rehabilitation techniques used to eliminate punching shear failures was assessed for flat-slab structural systems. This type of retrofit was evaluated for a four-story reinforced concrete (RC) ...

  18. DOE's Former Rocky Flats Weapons Production Site to Become National...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Flats nuclear weapons production site to the Department of the Interior's (DOI) U.S. Fish and Wildlife Service (FWS) for use as a National Wildlife Refuge. After more than a...

  19. atomically flat gold: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Flat(Tire1) Intact(Tire1) StartFinish Inflate(Tire1 Starner, Thad E. 147 Local and global instabilities in nanosize rectangular prismatic gold specimens R.C. Batra *, A.A....

  20. Modified Ricci flow and asymptotically non-flat spaces

    E-Print Network [OSTI]

    Shubhayu Chatterjee; Narayan Banerjee

    2013-04-08T23:59:59.000Z

    The present work extends the application of a modified Ricci flow equation to an asymptotically non flat space, namely Marder's cylindrially symmetric space. It is found that the flow equation has a solution at least in a particular case.

  1. Eyeglasses-free display: towards correcting visual aberrations with computational light field displays

    E-Print Network [OSTI]

    Huang, Fu-Chung

    Millions of people worldwide need glasses or contact lenses to see or read properly. We introduce a computational display technology that predistorts the presented content for an observer, so that the target image is ...

  2. Eyeglasses-free Display: Towards Correcting Visual Aberrations with Computational Light Field Displays

    E-Print Network [OSTI]

    O'Brien, James F.

    Eyeglasses-free Display: Towards Correcting Visual Aberrations with Computational Light Field of the population in some Asia countries [Wong et al. 2000] suffer from myopia. Eyeglasses have been the pri- mary

  3. Ultrathin optical panel and a method of making an ultrathin optical panel

    DOE Patents [OSTI]

    Biscardi, Cyrus (Bellport, NY); Brewster, Calvin (North Patchogue, NY); DeSanto, Leonard (Patchogue, NY); Veligdan, James T. (Manorville, NY)

    2003-02-11T23:59:59.000Z

    An ultrathin optical panel, and a method of producing an ultrathin optical panel, are disclosed, including stacking a plurality of glass sheets, which sheets may be coated with a transparent cladding substance or may be uncoated, fastening together the plurality of stacked coated glass sheets using an epoxy or ultraviolet adhesive, applying uniform pressure to the stack, curing the stack, sawing the stack to form an inlet face on a side of the stack and an outlet face on an opposed side of the stack, bonding a coupler to the inlet face of the stack, and fastening the stack, having the coupler bonded thereto, within a rectangular housing having an open front which is aligned with the outlet face, the rectangular housing having therein a light generator which is optically aligned with the coupler. The light generator is preferably placed parallel to and proximate with the inlet face, thereby allowing for a reduction in the depth of the housing.

  4. Ultrathin Optical Panel And A Method Of Making An Ultrathin Optical Panel.

    DOE Patents [OSTI]

    Biscardi, Cyrus (Bellport, NY); Brewster, Calvin (North Patchoque, NY); DeSanto, Leonard (Patchoque, NY); Veligdan, James T. (Manorville, NY)

    2005-02-15T23:59:59.000Z

    An ultrathin optical panel, and a method of producing an ultrathin optical panel, are disclosed, including stacking a plurality of glass sheets, which sheets may be coated with a transparent cladding substance or may be uncoated, fastening together the plurality of stacked coated glass sheets using an epoxy or ultraviolet adhesive, applying uniform pressure to the stack, curing the stack, sawing the stack to form an inlet face on a side of the stack and an outlet face on an opposed side of the stack, bonding a coupler to the inlet face of the stack, and fastening the stack, having the coupler bonded thereto, within a rectangular housing having an open front which is aligned with the outlet face, the rectangular housing having therein a light generator which is optically aligned with the coupler. The light generator is preferably placed parallel to and proximate with the inlet face, thereby allowing for a reduction in the depth of the housing.

  5. Ultrathin optical panel and a method of making an ultrathin optical panel

    DOE Patents [OSTI]

    Biscardi, Cyrus (Bellport, NY); Brewster, Calvin (North Patchogue, NY); DeSanto, Leonard (Patchogue, NY); Veligdan, James T. (Manorville, NY)

    2002-01-01T23:59:59.000Z

    An ultrathin optical panel, and a method of producing an ultrathin optical panel, are disclosed, including stacking a plurality of glass sheets, which sheets may be coated With a transparent cladding substance or may be uncoated, fastening together the plurality of stacked coated glass sheets using an epoxy or ultraviolet adhesive, applying uniform pressure to the stack, curing the stack, sawing the stack to form an inlet face on a side of the stack and an outlet face on an opposed side of the stack, bonding a coupler to the inlet face of the stack, and fastening the stack, having the coupler bonded thereto, within a rectangular housing having an open front which is aligned with the outlet face, the rectangular housing having therein a light generator which is optically aligned with the coupler. The light generator is preferably placed parallel to and proximate with the inlet face, thereby allowing for a reduction in the depth of the housing.

  6. Ultrathin optical panel and a method of making an ultrathin optical panel

    DOE Patents [OSTI]

    Biscardi, Cyrus (Bellport, NY); Brewster, Calvin (North Patchogue, NY); DeSanto, Leonard (Patchogue, NY); Veligdan, James T. (Manorville, NY)

    2001-10-09T23:59:59.000Z

    An ultrathin optical panel, and a method of producing an ultrathin optical panel, are disclosed, including stacking a plurality of glass sheets, which sheets may be coated with a transparent cladding substance or may be uncoated, fastening together the plurality of stacked coated glass sheets using an epoxy or ultraviolet adhesive, applying uniform pressure to the stack, curing the stack, sawing the stack to form an inlet face on a side of the stack and an outlet face on an opposed side of the stack, bonding a coupler to the inlet face of the stack, and fastening the stack, having the coupler bonded thereto, within a rectangular housing having an open front which is aligned with the outlet face, the rectangular housing having therein a light generator which is optically aligned with the coupler. The light generator is preferably placed parallel to and proximate with the inlet face, thereby allowing for a reduction in the depth of the housing.

  7. Ultrathin Optical Panel And A Method Of Making An Ultrathin Optical Panel.

    DOE Patents [OSTI]

    Biscardi, Cyrus (Bellport, NY); Brewster, Calvin (North Patchogue, NY); DeSanto, Leonard (Patchogue, NY); Veligdan, James T. (Manorville, NY)

    2005-05-17T23:59:59.000Z

    An ultrathin optical panel, and a method of producing an ultrathin optical panel, are disclosed, including stacking a plurality of glass sheets, which sheets may be coated with a transparent cladding substance or may be uncoated, fastening together the plurality of stacked coated glass sheets using an epoxy or ultraviolet adhesive, applying uniform pressure to the stack, curing the stack, sawing the stack to form an inlet face on a side of the stack and an outlet face on an opposed side of the stack, bonding a coupler to the inlet face of the stack, and fastening the stack, having the coupler bonded thereto, within a rectangular housing having an open front which is aligned with the outlet face, the rectangular housing having therein a light generator which is optically aligned with the coupler. The light generator is preferably placed parallel to and proximate with the inlet face, thereby allowing for a reduction in the depth of the housing.

  8. Flat Lens Criterion by Small-Angle Phase

    E-Print Network [OSTI]

    Ott, Peter; Lezec, Henri J; Chau, Kenneth J

    2015-01-01T23:59:59.000Z

    We show that a classical imaging criterion based on angular dependence of small-angle phase can be applied to any system composed of planar, uniform media to determine if it is a flat lens capable of forming a real paraxial image and to estimate the image location. The real paraxial image location obtained by this method shows agreement with past demonstrations of far-field flat-lens imaging and can even predict the location of super-resolved images in the near-field. The generality of this criterion leads to several new predictions: flat lenses for transverse-electric polarization using dielectric layers, a broadband flat lens working across the ultraviolet-visible spectrum, and a flat lens configuration with an image plane located up to several wavelengths from the exit surface. These predictions are supported by full-wave simulations. Our work shows that small-angle phase can be used as a generic metric to categorize and design flat lenses.

  9. Travel Trends Using the Puget Sound Panel Survey: A Generalized Estimating Equations Approach

    E-Print Network [OSTI]

    Yee, Julie; Niemeier, Debbie

    1998-01-01T23:59:59.000Z

    panel survey for the Puget Sound Region. Trans­ portationTravel trends using the Puget Sound Panel Table 18. Wave 1longitudinal data from the Puget Sound Transportation Panel.

  10. Atomic Safety and Licensing Board Panel annual report, Fiscal year 1992

    SciTech Connect (OSTI)

    Not Available

    1993-09-01T23:59:59.000Z

    In Fiscal Year 1992, the Atomic Safety and Licensing Board Panel (``the Panel``) handled 38 proceedings. The cases addressed issues in the construction, operation, and maintenance of commercial nuclear power reactors and other activities requiring a license from the Nuclear Regulatory Commission. This reports sets out the Panel`s caseload during the year and summarizes, highlights, and analyzes how the wide-ranging issues raised in those proceedings were addressed by the Panel`s judges and licensing boards.

  11. Flattening Scientific CCD Imaging Data with a Dome Flat Field System

    E-Print Network [OSTI]

    J. L. Marshall; D. L. DePoy

    2005-10-07T23:59:59.000Z

    We describe the flattening of scientific CCD imaging data using a dome flat field system. The system uses light emitting diodes (LEDs) to illuminate a carefully constructed dome flat field screen. LEDs have several advantages over more traditional illumination sources: they are available in a wide range of output wavelengths, are inexpensive, have a very long source lifetime, and are straightforward to control digitally. The circular dome screen is made of a material with Lambertian scattering properties that efficiently reflects light of a wide range of wavelengths and incident angles. We compare flat fields obtained using this new system with two types of traditionally-constructed flat fields: twilight sky flats and nighttime sky flats. Using photometric standard stars as illumination sources, we test the quality of each flat field by applying it to a set of standard star observations. We find that the dome flat field system produces flat fields that are superior to twilight or nighttime sky flats, particularly for photometric calibration. We note that a ratio of the twilight sky flat to the nighttime sky flat is flat to within the expected uncertainty; but since both of these flat fields are inferior to the dome flat, this common test is not an appropriate metric for testing a flat field. Rather, the only feasible and correct method for determining the appropriateness of a flat field is to use standard stars to measure the reproducibility of known magnitudes across the detector.

  12. active matrix flat: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of semiconductor superlattice Petta, Jason 22 Transparent Active Matrix Organic Light-Emitting Diode Displays Driven by Chemistry Websites Summary: and portable electronics. In...

  13. POLICY FLASH 2014-25 Revision to the Procurement Strategy Panel...

    Energy Savers [EERE]

    5 Revision to the Procurement Strategy Panel (PSP) Briefing Process POLICY FLASH 2014-25 Revision to the Procurement Strategy Panel (PSP) Briefing Process For DOE questions...

  14. Security alarm communication and display systems development

    SciTech Connect (OSTI)

    Waddoups, I.G.

    1990-01-01T23:59:59.000Z

    Sandia National Laboratories has developed a variety of alarm communication and display systems for a broad spectrum of users. This paper will briefly describe the latest systems developed for the Department of Energy (DOE), the Department of Defense (DoD), and the Department of State (DOS) applications. Applications covered will vary from relatively small facilities to large complex sites. Ongoing system developments will also be discussed. The concluding section will summarize the practical, implementable state-of-the-art features available in new systems. 6 figs.

  15. Panel 1 - comparative evaluation of deposition technologies

    SciTech Connect (OSTI)

    Fenske, G.R.; Stodolsky, F. [Argonne National Lab., IL (United States); Benson, D.K.; Pitts, R.J. [National Renewable Energy Lab., Golden, CO (United States); Bhat, D.G. [GTE Valenite Corp., Troy, MI (United States); Yulin Chen [Allison Gas Turbine Division, GM, Indianapolis, IN (United States); Gat, R.; Sunkara, M.K. [Case Western Reserve Univ., Cleveland, OH (United States); Kelly, M. [Stanford Univ., CA (United States); Lawler, J.E. [Univ. of Wisconsin, Madison (United States); Nagle, D.C. [Martin Marietta Labs., Baltimore, MD (United States); Outka, D. [Sandia National Laboratories, Livermore, CA (United States); Revankar, G.S. [Deere & Co., Moline, IL (United States); Subramaniam, V.V. [Ohio State Univ., Columbus (United States); Wilbur, P.J. [Colorado State Univ., Fort Collins (United States); Mingshow Wong [Northwestern Univ., Evanston, IL (United States); Woolam, W.E. [Southwest Research Inst., Arlington, VA (United States)

    1993-01-01T23:59:59.000Z

    This working group attempted to evaluate/compare the different types of deposition techniques currently under investigation for depositing diamond and diamond-like carbon films. A table lists the broad types of techniques that were considered for depositing diamond and diamond-like carbon films. After some discussion, it was agreed that any evaluation of the various techniques would be dependent on the end application. Thus the next action was to list the different areas where diamond and DLC films could find applications in transportation. These application areas are listed in a table. The table intentionally does not go into great detail on applications because that subject is dealt with specifically by Panel No. 4 - Applications To Transportation. The next action concentrated on identifying critical issues or limitations that need to be considered in evaluating the different processes. An attempt was then made to rank different broad categories of deposition techniques currently available or under development based on the four application areas and the limitations. These rankings/evaluations are given for diamond and DLC techniques. Finally, the working group tried to identify critical development and research issues that need to be incorporated into developing a long-term program that focuses on diamond/DLC coatings for transportation needs. 5 tabs.

  16. FROM FLAT DIRECT MODELS TO SEGMENTAL CRF MODELS Geoffrey Zweig and Patrick Nguyen

    E-Print Network [OSTI]

    Hunt, Galen

    the SCRF is better suited. Index Terms-- Flat Direct Model, Segmental CRF, Voice Search, Speech Recognition

  17. Commercial assessment of roll to roll manufacturing of electronic displays

    E-Print Network [OSTI]

    Randolph, Michael Aaron

    2006-01-01T23:59:59.000Z

    The cost of manufacturing electronic displays currently limits the range of applications and markets into which it is currently economically feasible to adopt displays. Roll-to-roll manufacturing has been identified by the ...

  18. Hermetically sealed encasements for historic document display and preservation

    E-Print Network [OSTI]

    Durand, Keith (Keith V.)

    2011-01-01T23:59:59.000Z

    The goal of this thesis was to develop designs and methods for the preservation and display of historic documents. The results were applied via the design, manufacture, and installation of five hermetic display encasements ...

  19. Home Energy Displays: Consumer Adoption and Response

    SciTech Connect (OSTI)

    LaMarche, J.; Cheney, K.; Akers, C.; Roth, K.; Sachs, O.

    2012-12-01T23:59:59.000Z

    The focus of this project was to investigate the factors influencing consumer adoption of Home Energy Displays (HEDs) and to evaluate electricity consumption in households with basic HEDs versus enhanced feedback methods - web portals or alerts. We hypothesized that providing flexible and relatable information to users, in addition to a basic HED, would make feedback more effective and achieve persistent energy savings. In Phase I, we conducted three user research studies and found preferences for aesthetically pleasing, easy to understand feedback that is accessible through multiple media and offered free of charge. The deployment of HEDs in 150 households planned for Phase II encountered major recruitment and HED field deployment problems. First, after extensive outreach campaigns to apartment complexes with 760 units, only 8% of building's tenants elected to receive a free HED in their homes as part of the field study. Second, the HED used, a leading market model, had a spectrum of problems, including gateway miscommunications, failure to post to a data-hosting third party, and display malfunctions. In light of these challenges, we are pursuing a modified study investigating the energy savings of a web portal versus alert-based energy feedback instead of a physical HED.

  20. Human factors evaluation of electroluminescent display. number sign. 1

    SciTech Connect (OSTI)

    Auflick, J.L. (EG and G Idaho, Inc., Idaho Falls, ID (USA))

    1989-08-01T23:59:59.000Z

    This report consists of an an electroluminescent display, done by scientists and researchers in the Human Factors Research Unit at EG G, Idaho, Inc. The purpose of this evaluation was to examine the Sunlight Readability'' of one electroluminescent (EL) display; a display which may be incorporated into a new generation of US Army diesel generators. The basic finding of this evaluation is that this particular EL display is not sunlight readable. 2 figs., 10 tabs.

  1. ORIGINAL PAPER Peacocks orient their courtship displays towards the sun

    E-Print Network [OSTI]

    Montgomerie, Bob

    ORIGINAL PAPER Peacocks orient their courtship displays towards the sun Roslyn Dakin & Robert on male orientation relative to the position of the sun. During the "wing-shaking" display, females were generally behind the displaying male, and male orientation with respect to the position of the sun

  2. Projective flatness in the quantisation of bosons and fermions

    E-Print Network [OSTI]

    Siye Wu

    2010-10-06T23:59:59.000Z

    We compare the quantisation of linear systems of bosons and fermions. We recall the appearance of projectively flat connection and results on parallel transport in the quantisation of bosons. We then discuss pre-quantisation and quantisation of fermions using the calculus of fermionic variables. We then define a natural connection on the bundle of Hilbert spaces and show that it is projectively flat. This identifies, up to a phase, equivalent spinor representations constructed by various polarisations. We introduce the concept of metaplectic correction for fermions and show that the bundle of corrected Hilbert spaces is naturally flat. We then show that the parallel transport in the bundle of Hilbert spaces along a geodesic is the rescaled projection or the Bogoliubov transformation provided that the geodesic lies within the complement of a cut locus. Finally, we study the bundle of Hilbert spaces when there is a symmetry.

  3. Panel data analysis of U.S. coal productivity

    E-Print Network [OSTI]

    Stoker, Thomas M.

    2000-01-01T23:59:59.000Z

    We analyze labor productivity in coal mining in the United States using indices of productivity change associated with the concepts of panel data modeling. This approach is valuable when there is extensive heterogeneity ...

  4. Obama Administration Announces Plans to Install New Solar Panels...

    Broader source: Energy.gov (indexed) [DOE]

    WASHINGTON - U.S. Energy Secretary Steven Chu and Council of Environmental Quality (CEQ) Chair Nancy Sutley today announced plans to install solar panels and a solar hot water...

  5. Dynamic instabilities imparted by CubeSat deployable solar panels

    E-Print Network [OSTI]

    Peters, Eric David

    2014-01-01T23:59:59.000Z

    In this work, multibody dynamics simulation was used to investigate the effects of solar panel deployment on CubeSat attitude dynamics. Nominal and partial/asymmetric deployments were simulated for four different solar ...

  6. Information tracking and sharing in organic photovoltaic panel manufacturing

    E-Print Network [OSTI]

    Gong, Ming, M. Eng. Massachusetts Institute of Technology

    2011-01-01T23:59:59.000Z

    The MIT MEng team of four worked with Konarka Technologies, a world leading organic solar panel manufacturer, on production tracking and analysis as well as various operational improvement projects. MIT's collaborative ...

  7. Blast Load Response of Steel Sandwich Panels with Liquid Encasement

    SciTech Connect (OSTI)

    Dale Karr; Marc Perlin; Benjamin Langhorst; Henry Chu

    2009-10-01T23:59:59.000Z

    We describe an experimental investigation of the response of hybrid blast panels for protection from explosive and impact forces. The fundamental notion is to dissipate, absorb, and redirect energy through plastic collapse, viscous dissipation, and inter-particle forces of liquid placed in sub-structural compartments. The panels are designed to absorb energy from an impact or air blast by elastic-plastic collapse of the panel substructure that includes fluid-filled cavities. The fluid contributes to blast effects mitigation by providing increased initial mass and resistance, by dissipation of energy through viscosity and fluid flow, and by redirecting the momentum that is imparted to the system from the impact and blast impulse pressures. Failure and deformation mechanisms of the panels are described.

  8. Kingspan Insulated Panels: Proposed Penalty (2013-CE-5353)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Kingspan Insulated Panels, Inc. failed to certify a variety of walk-in cooler or freezer components as compliant with the applicable energy conservation standards.

  9. City and County of Denver- Solar Panel Permitting

    Broader source: Energy.gov [DOE]

    Denver provides same-day permit review for most solar panel projects. Electrical, Plumbing, and Zoning Permits* are required for photovoltaic (PV) systems installed in the city of Denver, althoug...

  10. Panel Discussion: Career Paths in Energy & Sustainability: Perspective...

    Broader source: Energy.gov (indexed) [DOE]

    a.m.-7 p.m. The events include: 11:30 a.m.-2 p.m. Panel Discussion "Career Paths in Energy & Sustainability: Perspectives from Successful Women Professionals," including Dr....

  11. Panel data models with nonadditive unobserved heterogeneity : estimation and inference

    E-Print Network [OSTI]

    Lee, Joonhwan

    2014-01-01T23:59:59.000Z

    This paper considers fixed effects estimation and inference in linear and nonlinear panel data models with random coefficients and endogenous regressors. The quantities of interest - means, variances, and other moments of ...

  12. Seismic retrofit of precast panel buildings in Eastern Europe

    E-Print Network [OSTI]

    Tzonev, Tzonu

    2013-01-01T23:59:59.000Z

    Many countries in Eastern Europe, particularly ones from the former Soviet Bloc, are facing a potential crisis regarding their deteriorating precast panel apartment buildings. These complexes were built using industrial ...

  13. advisory panel open: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Effective Fabrication of a Solar PV Panel for LED Lighting CiteSeer Summary: Abstract Solar cells are very fragile so they need a encapsulant and encasing for protection and...

  14. advisory panel notice: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Effective Fabrication of a Solar PV Panel for LED Lighting CiteSeer Summary: Abstract Solar cells are very fragile so they need a encapsulant and encasing for protection and...

  15. ashp expert panel: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Effective Fabrication of a Solar PV Panel for LED Lighting CiteSeer Summary: Abstract Solar cells are very fragile so they need a encapsulant and encasing for protection and...

  16. access panel surveys: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Effective Fabrication of a Solar PV Panel for LED Lighting CiteSeer Summary: Abstract Solar cells are very fragile so they need a encapsulant and encasing for protection and...

  17. Limited Dependent Variable Correlated Random Coefficient Panel Data Models

    E-Print Network [OSTI]

    Liang, Zhongwen

    2012-10-19T23:59:59.000Z

    OF CONTENTS : : : : : : : : : : : : : : : : : : : : : : : : : : : : : vii LIST OF TABLES : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : ix 1. INTRODUCTION : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : 1 1.1 Linear Models... : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : 2 1.2 Binary Response Models : : : : : : : : : : : : : : : : : : : : : : : : : 3 1.3 Truncated Models : : : : : : : : : : : : : : : : : : : : : : : : : : : : : 6 2. LINEAR CRC PANEL DATA MODELS : : : : : : : : : : : : : : : : : : 8 2.1...

  18. Superintegrability in a non-conformally-flat space

    E-Print Network [OSTI]

    E. G. Kalnins; J. M. Kress; W. Miller Jr

    2012-11-07T23:59:59.000Z

    Superintegrable systems in two- and three-dimensional spaces of constant curvature have been extensively studied. From these, superintegrable systems in conformally flat spaces can be constructed by Staeckel transform. In this paper a method developed to establish the superintegrability of the Tremblay-Turbiner-Winternitz system in two dimensions is extended to higher dimensions and a superintegrable system on a non-conformally-flat four-dimensional space is found. In doing so, curvature corrections to the corresponding classical potential are found to be necessary. It is found that some subalgebras of the symmetry algebra close polynomially.

  19. Segmented nanowires displaying locally controllable properties

    DOE Patents [OSTI]

    Sutter, Eli Anguelova; Sutter, Peter Werner

    2013-03-05T23:59:59.000Z

    Vapor-liquid-solid growth of nanowires is tailored to achieve complex one-dimensional material geometries using phase diagrams determined for nanoscale materials. Segmented one-dimensional nanowires having constant composition display locally variable electronic band structures that are determined by the diameter of the nanowires. The unique electrical and optical properties of the segmented nanowires are exploited to form electronic and optoelectronic devices. Using gold-germanium as a model system, in situ transmission electron microscopy establishes, for nanometer-sized Au--Ge alloy drops at the tips of Ge nanowires (NWs), the parts of the phase diagram that determine their temperature-dependent equilibrium composition. The nanoscale phase diagram is then used to determine the exchange of material between the NW and the drop. The phase diagram for the nanoscale drop deviates significantly from that of the bulk alloy.

  20. Phase-change materials to improve solar panel's performance Pascal Biwole1,2,*

    E-Print Network [OSTI]

    -change materials to improve solar panel's performance Pascal Biwole1,2,* , Pierre Eclache3 , Frederic Kuznik3 1-mail:phbiwole@unice.fr Abstract: High operating temperatures induce a loss of efficiency in solar photovoltaic and thermal panels set-up. Results show that adding a PCM on the back of a solar panel can maintain the panel

  1. Optimization on Solar Panels: Finding the Optimal Output Brian Y. Lu

    E-Print Network [OSTI]

    Lavaei, Javad

    Optimization on Solar Panels: Finding the Optimal Output Brian Y. Lu January 1, 2013 1 Introduction of solar panel: Routing the configuration between solar cells with a switch matrix. However, their result models and control policies for the optimal output of solar panels. The smallest unit on a solar panel

  2. Project focus: Complete design of an interactive solar panel system to be situated on

    E-Print Network [OSTI]

    Project focus: · Complete design of an interactive solar panel system to be situated on top the effective area · Two types of solar cells: · 3 panel configurations: · Real-time power output data Si panels with 30.0o tilt c) 10 CdTe panels; 38.5o tilt · Solar insolation recorder, thermometer

  3. 134 www.pv-tech.org Introduction

    E-Print Network [OSTI]

    Schiff, Eric A.

    of attention as a material for the low-cost manufacture of solar cells and panels. Silicon is non-area flat panel displays, proving that the deposition of solar cell material over a large area should in building- integrated photovoltaic structures (Fig. 1). The production of solar panels using thin

  4. Scaling attractors for quintessence in flat universe with cosmological term

    E-Print Network [OSTI]

    V. V. Kiselev

    2007-02-08T23:59:59.000Z

    For evolution of flat universe, we classify late time and future attractors with scaling behavior of scalar field quintessence in the case of potential, which, at definite values of its parameters and initial data, corresponds to exact scaling in the presence of cosmological constant.

  5. Distributed Roughness Receptivity in a Flat Plate Boundary Layer

    E-Print Network [OSTI]

    Kuester, Matthew Scott

    2014-04-18T23:59:59.000Z

    for the three different unit Reynolds num- ber test conditions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 3.4 Spanwise uniformity of boundary layer integral quantities at x = 870 mm for low unit Reynolds number test condition... with the distributed roughness configuration . . . . . . . . . . . . . . . . . . . . . . . . . . 24 3.5 Differential pressure across the flat plate leading edge. . . . . . . . . . 25 3.6 Roughness patch (k = 1 mm), before windowing . . . . . . . . . . . . 27 3...

  6. Film cooling on a flat plate: investigating density

    E-Print Network [OSTI]

    Grizzle, Joshua Peter Fletcher

    2009-05-15T23:59:59.000Z

    This study is an investigation of two specific effects on turbine blade film cooling. The effect of coolant to mainstream density ratio and upstream steps was studied. The studies were conducted on two flat plates with 4mm cylindrical film cooling...

  7. Avoidance of a Landau pole by flat contributions in QED

    SciTech Connect (OSTI)

    Klaczynski, Lutz, E-mail: lutz.klaczynski@gmx.de [Department of Physics, Humboldt University Berlin, 12489 Berlin (Germany); Kreimer, Dirk, E-mail: kreimer@mathematik.hu-berlin.de [Alexander von Humboldt Chair in Mathematical Physics, Humboldt University, Berlin 12489 (Germany)

    2014-05-15T23:59:59.000Z

    We consider massless Quantum Electrodynamics in the momentum scheme and carry forward an approach based on Dyson–Schwinger equations to approximate both the ?-function and the renormalized photon self-energy (Yeats, 2011). Starting from the Callan–Symanzik equation, we derive a renormalization group (RG) recursion identity which implies a non-linear ODE for the anomalous dimension and extract a sufficient but not necessary criterion for the existence of a Landau pole. This criterion implies a necessary condition for QED to have no such pole. Solving the differential equation exactly for a toy model case, we integrate the corresponding RG equation for the running coupling and find that even though the ?-function entails a Landau pole it exhibits a flat contribution capable of decreasing its growth, in other cases possibly to the extent that such a pole is avoided altogether. Finally, by applying the recursion identity, we compute the photon propagator and investigate the effect of flat contributions on both spacelike and timelike photons. -- Highlights: •We present an approach to approximate both the ?-function and the photon self-energy. •We find a sufficient criterion for the self-energy to entail the existence of a Landau pole. •We study non-perturbative ‘flat’ contributions that emerge within the context of our approach. •We discuss a toy model and how it is affected by flat contributions.

  8. Flatness of heavy chain systems Nicolas Petit 1

    E-Print Network [OSTI]

    .e. trolleys carrying a fixed length heavy chain that may carry a load, is addressed in the partial derivatives the homogeneous chain carrying a load, see equation (13). In [11] the flatness [3, 4] of heavy chain systems, i dimensional case. Under small angle approximations, these heavy chain systems are described by a 1D partial

  9. Flatness-based control of an irrigation canal using SCADA

    E-Print Network [OSTI]

    -time irrigation operations using a supervision, control, and data acquisition (SCADA) system with automatic centralized controller. Irrigation canals can be viewed and modeled as delay systems since it takes timeFlatness-based control of an irrigation canal using SCADA Tarek Rabbani, Simon Munier, David

  10. Appendix C: Installation of Simpson Strong-Tie Storm Panel Screws The Storm Panel Screws are currently available in Hawai`i and meet the International

    E-Print Network [OSTI]

    Wang, Yuqing

    are prepared before installation by following the four P's: 1) Precut the panels to the proper dimensions) Pull off the panel. 6) Adjust screw penetrations so that the spacer between the top set of screw

  11. Bonded Bracket Assmebly for Frameless Solar Panels

    SciTech Connect (OSTI)

    Murray, Todd

    2013-01-30T23:59:59.000Z

    In February 2011 the US Department of Energy announced their new Sunshot Initiative. The Sunshot goal is to reduce the total cost of solar energy systems by about 75 percent before the end of the decade. The DOE estimated that a total installed cost of $1 per watt for photovoltaic systems would be equivalent to 6���¢/kilowatt hour (kWh) for energy available from the grid. The DOE also estimated that to meet the $1 per watt goal, PV module costs would need to be reduced to $.50 per watt, balance of systems costs would need to be reduced to $.40 per watt, and power electronic costs would need to reach $.10 per watt. To address the BOS balance of systems cost component of the $1 per watt goal, the DOE announced a funding opportunity called (BOS-X) Extreme Balance of System Hardware Cost Reductions. The DOE identified eight areas within the total BOS costs: 1) installation labor, 2) installation materials, 3) installation overhead and profit, 4) tracker, 5) permitting and commissioning, 6) site preparation, 7) land acquisition, 8) sales tax. The BOS-X funding announcement requested applications in four specific topics: Topic 1: Transformational Building Integrated Photovoltaic (BIPV) Modules Topic 2: Roof and Ground Mount Innovations Topic 3: Transformational Photovoltaic System Designs Topic 4: Development of New Wind Load Codes for PV Systems The application submitted by ARaymond Tinnerman reflected the requirements listed in Topic #2, Roof and Ground Mount Innovations. The goal of topic #2 was to develop technologies that would result in the extreme reduction of material and labor costs associated with applications that require physical connections and attachments to roof and ground mount structures. The topics researched in this project included component cost reduction, labor reduction, weight reduction, wiring innovations, and alternative material utilization. The project objectives included: 1) The development of an innovative quick snap bracket assembly that would be bonded to frameless PV modules for commercial rooftop installations. 2) The development of a composite pultruded rail to replace traditional racking materials. 3) In partnership with a roofing company, pilot the certification of a commercial roof to be solar panel compliant, eliminating the need for structural analysis and government oversight resulting in significantly decreased permitting costs. 4) Reduce the sum of all cost impacts in topic #2 from a baseline total of $2.05/watt to $.34/watt.

  12. Lunar Rover Solar Panel MountTeam Members: Tian Le, Tudor Boiangiu, Jeremy Chan, James Haensel To develop a mechanized mount for a solar panel to

    E-Print Network [OSTI]

    Lunar Rover Solar Panel MountTeam Members: Tian Le, Tudor Boiangiu, Jeremy Chan, James Haensel To develop a mechanized mount for a solar panel to be mounted on a lunar rover. Must be: · capable of orienting panel towards sun · reside on mast extending vertically from rover · capable of unfurling solar

  13. Asymptotically flat gravitating spinor field solutions. Step 2 - the compatibility of Dirac equations in a curve and a flat spaces

    E-Print Network [OSTI]

    V. Dzhunushaliev

    2012-01-17T23:59:59.000Z

    Using the fact that a spin connection is defined to an accuracy of a vector it is shown that the spin connection should be modified in such a manner that Dirac equation in a curve space would be compatible with Dirac equation in a flat space.

  14. Project: (version of April 7, 2008) Numerical Simulation of Organic LED

    E-Print Network [OSTI]

    Hiptmair, Ralf

    -15% of the global energy production is used for lighting. Moreover, OLEDs have entered the small- and medium-size flat panel display market. The increasing complexity of OLEDs (layer composition and structures

  15. Tuning the Properties of Transparent Oxide Conductors. Dopant Ion Size and Electronic Structure Effects on CdO-Based

    E-Print Network [OSTI]

    Medvedeva, Julia E.

    as key components in optoelectronic devices such as flat panel displays (FPDs), organic light-emitting diodes (OLEDs), photovoltaics, solar cells, optical waveguides, and energy-efficient windows.1

  16. Mean-field theory of acentric order of dipolar chromophores in polymeric electro-optic materials Yuriy V. Pereverzev* and Oleg V. Prezhdo

    E-Print Network [OSTI]

    -to- optical signal transductors for cable television, diode lasers, high-density memories, flat panel displays field is lifted. Upon freezing, the sample exists in a long-lived metastable state with a signifi- cant

  17. Highly oriented crystals at the buried interface in polythiophene thin-film

    E-Print Network [OSTI]

    McGehee, Michael

    and Engineering, Stanford University, Stanford, California 94305, USA 2 Stanford Synchrotron Radiation Laboratory) for large-area and low-cost applications, including flat-panel displays and radiofrequency identification

  18. Excitonic Processes in Nanostructured Optoelectronic Devices...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    At UDC he worked on the application of organic materials to LEDs for full color flat panel displays and thin film photovoltaics for solar cell and detector applications. His...

  19. PHYSICAL REVIEW B 85, 155101 (2012) Electronic properties of layered multicomponent wide-band-gap oxides: A combinatorial approach

    E-Print Network [OSTI]

    Medvedeva, Julia E.

    devices including solar cells, smart windows, and flat panel displays, and they also find application as heating, antistatic, and optical coatings (for select reviews, see Refs. 1­7). Multicomponent TCOs

  20. SHEN ET AL. VOL. 5 ' NO. 8 ' 61486155 ' 2011 www.acsnano.org

    E-Print Network [OSTI]

    Wang, Zhong L.

    electronics, flat panel displays, light-emitting diodes, solar cells, and gas sensors. Over the past years sections via a rapid heating process.30 Zhou * Address correspondence to gzshen@mail.hust.edu.cn, zhong

  1. Thin optic surface analysis for high resolution X-ray telescopes

    E-Print Network [OSTI]

    Akilian, Mireille

    2004-01-01T23:59:59.000Z

    The art of glass developed throughout the years has covered artifacts ranging from crude ornaments to high precision optics used in flat panel displays, hard disk drives, and x-ray telescopes. Methods for manufacturing ...

  2. Problem

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    that could benefit from this coating process include high-definition flat panel displays, sensor coatings for both biological and chemical sensors, and low-k materials for next...

  3. Patterning Organic Electronics Based on Nanoimprint Lithography

    E-Print Network [OSTI]

    Lo, Yi-Chen

    2014-04-25T23:59:59.000Z

    with organic semiconductors. This technique was then used to fabricate passive-matrix organic light-emitting diode (PMOLED) arrays for flat-panel display applications. Fabrication of a self-aligned bottom gate electrode for organic metal semiconductor field...

  4. Terahertz Dielectric Properties and Low-Frequency Phonon Resonances of ZnO Nanostructures

    E-Print Network [OSTI]

    spectral region, and therefore it can be used as the transparent conductive electrodes in solar cells and flat panel displays.10 Additionally, surface acoustic wave filters made from ZnO films have been used

  5. Dependences of the Al thickness and annealing temperature on the structural, optical and electrical properties in ZnO/Al multilayers

    E-Print Network [OSTI]

    Huang, Jung-Chun

    displays, electrochromic windows, electro-optical devices, gas sensors and solar cells. Nowadays, tin (TCO) films are currently of great commercial and scientific importance for applications in flat panel

  6. Mater. Res. Soc. Symp. Proc. Vol. 1426 2012 Materials Research Society DOI: 10.1557/opl.2012.1094

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    films. It has allowed the development of flat panel displays and tandem a-Si:H/ cSi:H solar cells [1 them attractive for stable solar cells and thin film transistors [13,14]. This approach has been

  7. Electron transport in naphthylamine-based organic compounds S. C. Tse, K. C. Kwok, and S. K. Soa

    E-Print Network [OSTI]

    So, Shu K.

    are organic light-emitting diodes OLEDs , thin-film transistors, solar cells, and photodetectors.1­4 Among them, OLED is now a leading contender in ultrathin, flexible, flat panel display technology. A simple

  8. Lattice model for kinetics and grain-size distribution in crystallization Mario Castro*

    E-Print Network [OSTI]

    Sánchez, Angel "Anxo"

    and thin-film solar cells.2 With these and similar applications in mind, the capability to en- gineer deposition has been driven by the technological development of active matrix addressed flat-panel displays1

  9. Structural, Electrical, and Optical Properties of SnO2:Sb Films Prepared on Flexible Substrate at Room Temperature

    E-Print Network [OSTI]

    Boo, Jin-Hyo

    , and solar cells.1­5) The increased utilization of many transparent electrodes has recently accelerated for application in various fields such as gas sensors, optoelec- tronic devices, flat panel displays, heat mirrors

  10. This article appeared in a journal published by Elsevier. The attached copy is furnished to the author for internal non-commercial research

    E-Print Network [OSTI]

    Park, Byungwoo

    recently, because of a rising demand for optoelec- tronic devices, such as solar cells, organic light emitting diodes (OLEDs), and flat panel displays [1e3]. Most of the previous research on TCOs has focused

  11. 215High performance gas sensing materials based on nanostructed metal oxide films Corresponding author: G. Kiriakidis, e-mail: kiriakid@iesl.forth.gr

    E-Print Network [OSTI]

    application as transparent electrodes in electronic and optoelectronic devices, such as solar cells, diffusion barriers in Al/In2 O3 /Si struc- ture and flat panel displays. In the last years, the gas

  12. INTERACTIVE COMPUTER GRAPHICS DISPLAYS FOR HIERARCHICAL DATA STRUCTURES

    E-Print Network [OSTI]

    Cahn, D.F.

    2010-01-01T23:59:59.000Z

    Pittsburgh, 1980 LBL-10247 INTERACTIVE COMPUTER GRAPHICSOF THIS DKiir.KHT IS UMLIMITEO INTERACTIVE COMPUTER GRAPHICSBerkeley, CA 94720 An interactive computer graphical display

  13. ascorbate peroxidase display: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    This novel approach to display technology consists of arranging six organic light emitting diode screens in a cubic form factor. We ... Pla i Conesa, Pol 35 Tradeoffs in...

  14. acinetobacter baumannii displays: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    This novel approach to display technology consists of arranging six organic light emitting diode screens in a cubic form factor. We ... Pla i Conesa, Pol 29 Tradeoffs in...

  15. Asymptotically flat black holes with scalar hair: a review

    E-Print Network [OSTI]

    Carlos A. R. Herdeiro; Eugen Radu

    2015-04-30T23:59:59.000Z

    We consider the status of black hole solutions with non-trivial scalar fields but no gauge fields, in four dimensional asymptotically flat space-times, reviewing both classical results and recent developments. We start by providing a simple illustration on the physical difference between black holes in electro-vacuum and scalar-vacuum. Next, we review no-scalar-hair theorems. In particular, we detail an influential theorem by Bekenstein and stress three key assumptions: 1) the type of scalar field equation; 2) the spacetime symmetry inheritance by the scalar field; 3) an energy condition. Then, we list regular (on and outside the horizon), asymptotically flat BH solutions with scalar hair, organizing them by the assumption which is violated in each case and distinguishing primary from secondary hair. We provide a table summary of the state of the art.

  16. Asymptotically flat black holes with scalar hair: a review

    E-Print Network [OSTI]

    Herdeiro, Carlos A R

    2015-01-01T23:59:59.000Z

    We consider the status of black hole solutions with non-trivial scalar fields but no gauge fields, in four dimensional asymptotically flat space-times, reviewing both classical results and recent developments. We start by providing a simple illustration on the physical difference between black holes in electro-vacuum and scalar-vacuum. Next, we review no-scalar-hair theorems. In particular, we detail an influential theorem by Bekenstein and stress three key assumptions: 1) the type of scalar field equation; 2) the spacetime symmetry inheritance by the scalar field; 3) an energy condition. Then, we list regular (on and outside the horizon), asymptotically flat BH solutions with scalar hair, organizing them by the assumption which is violated in each case and distinguishing primary from secondary hair. We provide a table summary of the state of the art.

  17. Plane-parallel waves as duals of the flat background

    E-Print Network [OSTI]

    Ladislav Hlavaty; Ivo Petr

    2014-12-03T23:59:59.000Z

    We give a classification of non-Abelian T-duals of the flat metric in D=4 dimensions with respect to the four-dimensional continuous subgroups of the Poincare group. After dualizing the flat background, we identify majority of dual models as conformal sigma models in plane-parallel wave backgrounds, most of them having torsion. We give their form in Brinkmann coordinates. We find, besides the plane-parallel waves, several diagonalizable curved metrics with nontrivial scalar curvature and torsion. Using the non-Abelian T-duality, we find general solution of the classical field equations for all the sigma models in terms of d'Alembert solutions of the wave equation.

  18. Wave interaction with a fixed vertical flat plate

    E-Print Network [OSTI]

    Glover, Lanny Bruce

    1985-01-01T23:59:59.000Z

    of Science in Ocean Engineering and graduated with merit in 1979. Commissioned an Ensign in the United States Navy he was selected for the Navy's Nuclear Power Program. After completing formal navy training he served onboard the USS TRUXTUN (CGN-35...) Andrew C. Vastano (Member) December )985 ABSTRACT wave Interaction with a Fixed Vertical Flat Plate. (December 1985) Lenny Bruce Glover, B. S. , United States Naval Academy Chairman of Advisory Committee: Dr. John B. Herbich The lift and drag...

  19. The Xi-transform for conformally flat space-time

    E-Print Network [OSTI]

    George Sparling

    2006-12-01T23:59:59.000Z

    The Xi-transform is a new spinor transform arising naturally in Einstein's general relativity. Here the example of conformally flat space-time is discussed in detail. In particular it is shown that for this case, the transform coincides with two other naturally defined transforms: one a two-variable transform on the Lie group SU(2, C), the other a transform on the space of null split octaves. The key properties of the transform are developed.

  20. DECOMMISSIONING CHALLENGES AT THE ROCKY FLATS ENVIRONMENTAL TECHNOLOGY SITE

    SciTech Connect (OSTI)

    Dorr, K. A.; Hoover, J.

    2002-02-25T23:59:59.000Z

    This paper presents a discussion of the demolition of the Building 788 cluster at the Rocky Flats Environmental Technology Site (RFETS) in Golden, Colorado. The Building 788 Cluster was a Resource Conservation and Recovery Act (RCRA) permitted storage facilities and ancillary structures. Topics covered include the methods employed for Project Planning, Regulatory Compliance, Waste Management, Hazard Identification, Radiological Controls, Risk Management, Field Implementation, and Cost Schedule control, and Lessons Learned and Project Closeout.

  1. Evaluation of tracking flat plate and concentrator PV systems

    SciTech Connect (OSTI)

    Lepley, T. [Phasor Energy Co., Phoenix, AZ (United States); Hammond, B.; Harris, A. [Arizona State Univ., Tempe, AZ (United States)

    1997-12-31T23:59:59.000Z

    Arizona Public Service Company has conducted side-by-side field tests of most of the leading tracking flat plate and concentrating PV technologies. The results verify the added value due to tracking, but show that additional reliability improvements are needed in most cases. Concentrator PV systems can be high performers in sunny regions. In addition, a novel inverter system design by Raytheon has demonstrated excellent performance and promises to be more reliable and have lower cost than competing technologies.

  2. Rocky Flats Plant Site Environmental Report: 1993 Highlights

    SciTech Connect (OSTI)

    Not Available

    1993-12-31T23:59:59.000Z

    The Rocky Flats Plant Site Environmental Report provides summary information on the plant`s environmental monitoring programs and the results recorded during 1993. The report contains a compliance summary, results of environmental monitoring and other related programs, a review of environmental remediation activities, information on external gamma radiation dose monitoring, and radiation dose estimates for the surrounding population. This section provides an overview of these topics and summarizes more comprehensive discussions found in the main text of this annual report.

  3. Flat-response x-ray-diode-detector development

    SciTech Connect (OSTI)

    Tirsell, G.

    1982-10-01T23:59:59.000Z

    In this report we discuss the design of an improved sub-nanosecond flat response x-ray diode detector needed for ICF diagnostics. This device consists of a high Z cathode and a complex filter tailored to flatten the response so that the total x-ray energy below 1.5 keV can be measured using a single detector. Three major problems have become evident as a result of our work with the original LLNL design including deviation from flatness due to a peak in the response below 200 eV, saturation at relatively low x-ray fluences, and long term gold cathode instability. We are investigating grazing incidence reflection to reduce the response below 200 eV, new high Z cathode materials for long term stability, and a new complex filter for improved flatness. Better saturation performance will require a modified XRD detector under development with reduced anode to cathode spacing and increased anode bias voltage.

  4. Asymptotically flat radiating solutions in third order Lovelock gravity

    SciTech Connect (OSTI)

    Dehghani, M. H. [Physics Department and Biruni Observatory, College of Sciences, Shiraz University, Shiraz 71454 (Iran, Islamic Republic of); Research Institute for Astrophysics and Astronomy of Maragha (RIAAM), Maragha (Iran, Islamic Republic of); Farhangkhah, N. [Physics Department and Biruni Observatory, College of Sciences, Shiraz University, Shiraz 71454 (Iran, Islamic Republic of)

    2008-09-15T23:59:59.000Z

    In this paper, we present an exact spherically symmetric solution of third order Lovelock gravity in n dimensions which describes the gravitational collapse of a null dust fluid. This solution is asymptotically (anti-)de Sitter or flat depending on the choice of the cosmological constant. Using the asymptotically flat solution for n{>=}7 with a power-law form of the mass as a function of the null coordinate, we present a model for a gravitational collapse in which a null dust fluid radially injects into an initially flat and empty region. It is found that a naked singularity is inevitably formed whose strength is different for the n=7 and n{>=}8 cases. In the n=7 case, the limiting focusing condition for the strength of curvature singularity is satisfied. But for n{>=}8, the strength of curvature singularity depends on the rate of increase of mass of the spacetime. These considerations show that the third order Lovelock term weakens the strength of the curvature singularity.

  5. Preparation of blue-emitting CaMgSi{sub 2}O{sub 6}:Eu{sup 2+} phosphors in reverse micellar system and their application to transparent emissive display devices

    SciTech Connect (OSTI)

    Choi, Sungho, E-mail: shochoi@krict.re.kr [Device Materials Research Center, Korea Research Institute of Chemical Technology, P.O. Box 107, Yuseong, Daejeon 305-600 (Korea, Republic of); Tae, Se-Won [Seoul Semiconductor, Wonsi-dong, Danwon-gu, Ansan-city, Gyeonggi-do (Korea, Republic of); Seo, Jung-Hyun [Device Materials Research Center, Korea Research Institute of Chemical Technology, P.O. Box 107, Yuseong, Daejeon 305-600 (Korea, Republic of); Department of Materials Science and Engineering, Korea University, Anam-dong, Seoul (Korea, Republic of); Jung, Ha-Kyun [Device Materials Research Center, Korea Research Institute of Chemical Technology, P.O. Box 107, Yuseong, Daejeon 305-600 (Korea, Republic of)

    2011-06-15T23:59:59.000Z

    Blue-emitting Eu{sup 2+}-doped CaMgSi{sub 2}O{sub 6} phosphors were prepared by the reverse micelle method. The resultant particles were nanocrystalline with a grain size of about <300 nm and exhibited a characteristic blue emission spectrum centered at 445 nm induced by the oxygen coordinated Eu{sup 2+} ions. By using the corresponding nanophosphors followed by the formation of a uniform phosphor layer, we have demonstrated the mini-sized transparent plasma-discharge panels and investigated their luminance characteristics. Phosphor coated panel is properly transparent, {>=}65%, at the visible wavelength region and illuminates a characteristic blue emission under Ne/Xe plasma discharge conditions. Thus, we can obtain a fast decaying, robust blue-emitting silicate phosphor layer under excited plasma radiation for upcoming emissive display devices like as transparent and three-dimensional plasma display panels. - Graphical abstract: Blue-emitting CaMgSi{sub 2}O{sub 6}:Eu{sup 2+} nanophosphors coated transparent luminescent layers can be obtained. It illuminates the characteristic blue emission, spectrum centered at 425 nm wavelength, under the Ne-Xe mixed gas plasma discharge condition. Highlights: > Blue-emitting CaMgSi{sub 2}O{sub 6}:Eu{sup 2+} nanophosphors via reverse micelle method. > Transparent blue-emitting layer was prepared by using corresponding phosphors. > Fast decaying with degradation-free luminescent layer under plasma radiation. > Promising luminescent layer for the upcoming plasma discharged transparent displays.

  6. Behavior of Concrete Panels Reinforced with Synthetic Fibers, Mild Steel, and GFRP Composites Subjected to Blasts

    SciTech Connect (OSTI)

    C. P. Pantelides; T. T. Garfield; W. D. Richins; T. K. Larson; J. E. Blakeley

    2012-03-01T23:59:59.000Z

    The paper presents experimental data generated for calibrating finite element models to predict the performance of reinforced concrete panels with a wide range of construction details under blast loading. The specimens were 1.2 m square panels constructed using Normal Weight Concrete (NWC) or Fiber Reinforced Concrete (FRC). FRC consisted of macro-synthetic fibers dispersed in NWC. Five types of panels were tested: NWC panels with steel bars; FRC panels without additional reinforcement; FRC panels with steel bars; NWC panels with glass fiber reinforced polymer (GFRP) bars; and NWC panels reinforced with steel bars and external GFRP laminates on both faces. Each panel type was constructed with three thicknesses: 152 mm, 254 mm, and 356 mm. FRC panels with steel bars had the best performance for new construction. NWC panels reinforced with steel bars and external GFRP laminates on both faces had the best performance for strengthening or rehabilitation of existing structures. The performance of NWC panels with GFRP bars was strongly influenced by the bar spacing. The behavior of the panels is classified in terms of damage using immediate occupancy, life safety, and near collapse performance levels. Preliminary dynamic simulations are compared to the experimental results.

  7. GPU rendering for autostereoscopic displays Francois de Sorbier

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    GPU rendering for autostereoscopic displays Franc¸ois de Sorbier LABINFO-IGM UMR CNRS 8049. In the case of real-time computer graphics images, the standard approach consists in rendering every view displays in a single render- ing pass. Our algorithm is based on the fact that vertices properties remain

  8. A Taxonomy of Real and Virtual World Display Integration

    E-Print Network [OSTI]

    Milgram, Paul

    Chapter 1 A Taxonomy of Real and Virtual World Display Integration Paul Milgram Herman Colquhoun Jr and control- display mapping in Section 1.2. Finally, in Section 1.3, we present a taxonomy which we hope in terms of breadth. Most common appear to be those for which AR refers narrowly to the 1 #12;2 A Taxonomy

  9. The DNA binding activity of p53 displays reactiondiffusion kinetics

    E-Print Network [OSTI]

    Hinow, Peter

    The DNA binding activity of p53 displays reaction­diffusion kinetics 26th Southeastern 37240 The DNA binding activity of p53 displays reaction­diffusion kinetics ­ p. 1/2 #12;Collaborators, Vanderbilt University · Emmanuele DiBenedetto, PhD, Department of Mathematics, Vanderbilt University The DNA

  10. Electronic displays using optically pumped luminescent semiconductor nanocrystals

    SciTech Connect (OSTI)

    Weiss, Shimon; Schlamp, Michael C; Alivisatos, A. Paul

    2014-02-11T23:59:59.000Z

    A multicolor electronic display is based on an array of luminescent semiconductor nanocrystals. Nanocrystals which emit light of different colors are grouped into pixels. The nanocrystals are optically pumped to produce a multicolor display. Different sized nanocrystals are used to produce the different colors. A variety of pixel addressing systems can be used.

  11. Electronic displays using optically pumped luminescent semiconductor nanocrystals

    SciTech Connect (OSTI)

    Weiss, Shimon; Schlam, Michael C; Alivisatos, A. Paul

    2014-03-25T23:59:59.000Z

    A multicolor electronic display is based on an array of luminescent semiconductor nanocrystals. Nanocrystals which emit tight of different colors are grouped into pixels. The nanocrystals are optically pumped to produce a multicolor display. Different sized nanocrystals are used to produce the different colors. A variety of pixel addressing systems can be used.

  12. Electronic displays using optically pumped luminescent semiconductor nanocrystals

    DOE Patents [OSTI]

    Weiss, Shimon; Schlamp, Michael C.; Alivisatos, A. Paul

    2005-03-08T23:59:59.000Z

    A multicolor electronic display is based on an array of luminescent semiconductor nanocrystals. Nanocrystals which emit light of different colors are grouped into pixels. The nanocrystals are optically pumped to produce a multicolor display. Different sized nanocrystals are used to produce the different colors. A variety of pixel addressing systems can be used.

  13. Electronic displays using optically pumped luminescent semiconductor nanocrystals

    DOE Patents [OSTI]

    Weiss, Shimon (Pinole, CA); Schlamp, Michael C. (Plainsboro, NJ); Alivisatos, A. Paul (Oakland, CA)

    2011-09-27T23:59:59.000Z

    A multicolor electronic display is based on an array of luminescent semiconductor nanocrystals. Nanocrystals which emit light of different colors are grouped into pixels. The nanocrystals are optically pumped to produce a multicolor display. Different sized nanocrystals are used to produce the different colors. A variety of pixel addressing systems can be used.

  14. Electronic displays using optically pumped luminescent semiconductor nanocrystals

    DOE Patents [OSTI]

    Weiss, Shimon; Schlamp, Michael C.; Alivisatos, A. Paul

    2010-04-13T23:59:59.000Z

    A multicolor electronic display is based on an array of luminescent semiconductor nanocrystals. Nanocrystals which emit light of different colors are grouped into pixels. The nanocrystals are optically pumped to produce a multicolor display. Different sized nanocrystals are used to produce the different colors. A variety of pixel addressing systems can be used.

  15. Sequence Logos: A New Way to Display Consensus Sequences

    E-Print Network [OSTI]

    Schneider, Thomas D.

    Sequence Logos: A New Way to Display Consensus Sequences Thomas D. Schneider \\Lambday and R content of the sequences at that position. From these `sequence logos', one can determine not only) at every position in a site or sequence. The logo displays both significant residues and subtle sequence

  16. Sequence Logos: A New Way to Display Consensus Sequences

    E-Print Network [OSTI]

    Schneider, Thomas D.

    Sequence Logos: A New Way to Display Consensus Sequences Thomas D. Schneider y and R. Michael of the sequences at that position. From these `sequence logos', one can determine not only the consensus sequence in a site or sequence. The logo displays both signi cant residues and subtle sequence patterns. INTRODUCTION

  17. Illustrative Display of Hidden Iso-Surface Structures Jan Fischer

    E-Print Network [OSTI]

    Bartz, Dirk

    Illustrative Display of Hidden Iso-Surface Structures Jan Fischer Visual Computing for Medicine is represented by black silhouettes and hatching. The second layer of the iso-surface is rendered as red is a widespread method for the display of volume datasets. It is based on the extraction of polygonal iso

  18. Electro-optical switching and memory display device

    DOE Patents [OSTI]

    Skotheim, T.A.; O'Grady, W.E.; Linkous, C.A.

    1983-12-29T23:59:59.000Z

    An electro-optical display device having a housing with wall means including one transparent wall and at least one other wall. Counter electrodes are positioned on the transparent wall and display electrodes are positioned on the other wall with both electrodes in electrically conductive relationship with an electrolyte. Circuits means are connected to the display and counter electrodes to apply different predetermined control potentials between them. The display electrodes are covered with a thin electrically conductive polymer film that is characterized according to the invention by having embedded in it pigment molecules as counter ions. The display device is operable to be switched to a plurality of different visual color states at an exceptionally rapid switching rate while each of the color states is characterized by possessing good color intensity and definition.

  19. Modular container assembled from fiber reinforced thermoplastic sandwich panels

    DOE Patents [OSTI]

    Donnelly, Mathew William (Edgewood, NM); Kasoff, William Andrew (Albuquerque, NM); Mcculloch, Patrick Carl (Irvine, CA); Williams, Frederick Truman (Albuquerque, NM)

    2007-12-25T23:59:59.000Z

    An improved, load bearing, modular design container structure assembled from thermoformed FRTP sandwich panels in which is utilized the unique core-skin edge configuration of the present invention in consideration of improved load bearing performance, improved useful load volume, reduced manufacturing costs, structural weight savings, impact and damage tolerance and repair and replace issues.

  20. Net Zero Residential Test Facility Gaithersburg, MD Solar Photovoltaic Panels

    E-Print Network [OSTI]

    Oak Ridge National Laboratory

    1 Net Zero Residential Test Facility Gaithersburg, MD Solar Photovoltaic Panels Solar Thermal;NZERTF Gaithersburg, MD 3 Objectives Demonstrate Net-Zero Energy for a home similar in nature: · Demonstrate Net-Zero Energy Usage · Measure All Building Loads (Sensible and Latent) · Operate Dedicated

  1. UNL Faculty Provide Updates to the Water Resources Advisory Panel

    E-Print Network [OSTI]

    Nebraska-Lincoln, University of

    UNL Faculty Provide Updates to the Water Resources Advisory Panel By Rachael Herpel, Outreach and Education Specialist, UNL Water Center and NU Rural Initiative The University of Nebraska- Lincoln's Water of guidance for UNL's water research, education and outreach programming. When WRAP first met in 2006

  2. PRESENTATION TO NRC BURNING PLASMA PANEL DR. STEPHEN O. DEAN

    E-Print Network [OSTI]

    JANUARY 17, 2003 In response to request by panel co-chair John Ahearne as follows: "We have heard from" #12;2 BOTTOM LINES FUSION IS NOT ON THE RADAR SCREEN OF THE U. S. ELECTRIC UTILITIES ! To get DEVELOPMENT WOULD ALSO ATTRACT INTEREST FROM INDUSTRY GENERAL ATOMICS, FOR HISTORICAL REASONS, IS UNIQUE

  3. Independent Scientific Review Panel for the Northwest Power & Conservation Council

    E-Print Network [OSTI]

    1 Independent Scientific Review Panel for the Northwest Power & Conservation Council 851 SW 6 th, 2011 To: Bruce Measure, Chair, Northwest Power and Conservation Council From: Eric Loudenslager, ISRP lamprey behavior and vulnerability to predation may affect abundance estimates. The proponents' submittal

  4. Predicting the Occurrence of Cosmetic Defects in Automotive Skin Panels

    SciTech Connect (OSTI)

    Hazra, S.; Williams, D.; Roy, R. [University of Warwick, Gibbet Hill Road, Coventry CV4 7AL (United Kingdom); Aylmore, R.; Allen, M.; Hollingdale, D. [Land Rover, Banbury Rd, Gaydon, Warwick, CV35 0RR (United Kingdom)

    2011-05-04T23:59:59.000Z

    The appearance of defects such as 'hollows' and 'shock lines' can affect the perceived quality and attractiveness of automotive skin panels. These defects are the result of the stamping process and appear as small, localized deviations from the intended styling of the panels. Despite their size, they become visually apparent after the application of paint and the perceived quality of a panel may become unacceptable. Considerable time is then dedicated to minimizing their occurrence through tool modifications. This paper will investigate the use of the wavelet transform as a tool to analyze physically measured panels. The transform has two key aspects. The first is its ability to distinguish small scale local defects from large scale styling curvature. The second is its ability to characterize the shape of a defect in terms of its wavelength and a 'correlation value'. The two features of the transform enable it to be used as a tool for locating and predicting the severity of defects. The paper will describe the transform and illustrate its application on test cases.

  5. Arkansas Students Get Their Hands Dirty in Solar Panel Project

    Broader source: Energy.gov [DOE]

    Wallie Shaw remembers where he got the idea to do a hands-on solar panel project for his Jobs for America’s Graduates (JAG) students, a school-to-work transition program focused on helping at-risk youth graduate from high school.

  6. Independent Scientific Review Panel for the Northwest Power & Conservation Council

    E-Print Network [OSTI]

    1 Independent Scientific Review Panel for the Northwest Power & Conservation Council 851 SW 6th are commended for fostering past studies and providing scientific information to develop management approaches be shown by (1) presenting the calculations for quantitative estimates of external phosphorus loading

  7. Independent Scientific Review Panel for the Northwest Power & Conservation Council

    E-Print Network [OSTI]

    1 Independent Scientific Review Panel for the Northwest Power & Conservation Council 851 SW 6th in the original solicitation. Statements about outstanding habitat units (HUs) and calculations from tables, reporting, and acquisitions are sufficiently improved. Those relating to actual management activities

  8. A shape memory-based multifunctional structural actuator panel

    E-Print Network [OSTI]

    Wadley, Haydn

    A shape memory-based multifunctional structural actuator panel Dana M. Elzey *, Aarash Y.N. Sofla significant load. The shape change is effected by shape memory alloy face sheet elements, which exploit a ``one-way'' shape memory effect only. Unlike other related designs, no external or bias forces

  9. FESAC FUSION SIMULATION PROJECT (FSP) PANEL REPORT William Tang1

    E-Print Network [OSTI]

    power plant (DEMO), further science and technology is needed to achieve the 2500 MW of continuous power1 FESAC FUSION SIMULATION PROJECT (FSP) PANEL REPORT William Tang1 , Riccardo Betti2 , Jeffrey) to FESAC, Dr. Raymond Orbach clearly identifies the overarching objective of the proposed Fusion Simulation

  10. Independent Scientific Review Panel for the Northwest Power Planning Council

    E-Print Network [OSTI]

    Independent Scientific Review Panel for the Northwest Power Planning Council 851 SW 6th Avenue memorandum, the Northwest Power Planning Council (Council) requested that the ISRP conduct additional review in which TPL would purchase the property from the developer, convey the conservation easement to WDFW

  11. An overview of the gate and panel industry 

    E-Print Network [OSTI]

    Fisher, C. West

    2000-01-01T23:59:59.000Z

    acquiring raw materials, its pre-fabrication, welding, touch-up, and delivery of the product. My first major responsibility for Texas Gate and Panel was to expand its sales territory. It soon became obvious that a thorough knowledge of my competitors...

  12. Panel on the Future of BPM Research/Publications

    E-Print Network [OSTI]

    van der Aalst, Wil

    PAGE 0 Panel on the Future of BPM Research/Publications August 29th 2013, 13.00-13.30 Wil van der Aalst (moderator), Florian Daniel, Jianmin Wang, Barbara Weber (BPM PC chairs 2013), Shazia Sadiq, Pnina Soffer, Hagen Völzer (BPM PC chairs 2014) #12;Motivation · For the first time, BPM authors were asked

  13. Report of the Technical' Panel on Magnetic Fusion

    E-Print Network [OSTI]

    ;Grumman CorporationBethpage, New York 11714-3580 Joseph G. Gavin, Jr Senior Management Consultant DecemberDOE/S-O035 Report of the Technical' Panel on Magnetic Fusion of the Energy Research Advisory Board November 1986 A Report of the Energy Research Advisory Board to the United States Department of Energy

  14. THE EGYPT LABOR MARKET PANEL SURVEY: INTRODUCING THE 2012 ROUND

    E-Print Network [OSTI]

    Levinson, David M.

    #12;THE EGYPT LABOR MARKET PANEL SURVEY: INTRODUCING THE 2012 ROUND Ragui Assaad and Caroline Egypt www.erf.org.eg Copyright © The Economic Research Forum, 2013 All rights reserved. No part our data to other statistical sources for Egypt to evaluate the representativeness of the sample

  15. Fire Alarm Control Panel is located in Switchgear

    E-Print Network [OSTI]

    on Basement Level Evacuation Route Exit Restroom Fire Extinguisher Fire Alarm Fire Alarm Control Panel Symbol. · Assist persons with disabilities. · Exit the building using the nearest exit. DO NOT USE ELEVATORS 110 106 108 C B 101A L-D 101 103 101B BR 116 B C A Evacuation Assembly Point: S1 Lower Level Entry

  16. Panel Damping Loss Factor Estimation Using The Random Decrement Technique

    E-Print Network [OSTI]

    Dande, Himanshu Amol

    2010-12-10T23:59:59.000Z

    The use of the Random Decrement Technique (RDT) for estimating panel damping loss factors ranging from 1% to 10% is examined in a systematic way, with a focus on establishing the various parameters one must specify to use the technique to the best...

  17. Predicting Panel Ratings for Semantic Characteristics of Lung Nodules

    E-Print Network [OSTI]

    Schaefer, Marcus

    Predicting Panel Ratings for Semantic Characteristics of Lung Nodules Dmitriy Zinovev De@cdm.depaul.edu ABSTRACT In reading CT scans with potentially malignant lung nodules, radiologists make use of high level a second opinion - predicting these semantic characteristics for lung nodules. In our previous work, we

  18. Findings and Recommendations by the California Carbon Capture and Storage Review Panel

    E-Print Network [OSTI]

    Sequestration Partnership #12;Findings and Recommendations by the California Carbon Capture and Storage ReviewFindings and Recommendations by the California Carbon Capture and Storage Review Panel December............................................................................1 Creation of the Carbon Capture and Storage Review Panel

  19. An arbitrarily high-order, unstructured, free-wake panel solver

    E-Print Network [OSTI]

    Moore, John Pease, IV

    2013-01-01T23:59:59.000Z

    A high-order panel code capable of solving the potential flow equation about arbitrary curved geometries is presented. A new method for integrating curved, high-order panels using adaptive Gaussian quadrature is detailed. ...

  20. White House Solar Panels Are a Symbol of Solar's Progress | Department...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Solar Panels Are a Symbol of Solar's Progress White House Solar Panels Are a Symbol of Solar's Progress May 13, 2014 - 12:02pm Addthis An error occurred. Unable to execute...

  1. Report on Hydrogen Storage Panel Findings in DOE-BES Sponsored...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hydrogen Storage Panel Findings in DOE-BES Sponsored Workshop on Basic Research for Hydrogen Production, Storage and Use Report on Hydrogen Storage Panel Findings in DOE-BES...

  2. Design and analysis of a concrete modular housing system constructed with 3D panels

    E-Print Network [OSTI]

    Sarcia, Sam Rhea, 1982-

    2004-01-01T23:59:59.000Z

    An innovative modular house system design utilizing an alternative concrete residential building system called 3D panels is presented along with an overview of 3D panels as well as relevant methods and markets. The proposed ...

  3. Law School Admissions Panel Law School representatives will discuss the law school admissions

    E-Print Network [OSTI]

    Brinkmann, Peter

    Law School Admissions Panel Law School representatives will discuss the law school admissions process and talk about their respective schools in a panel discussion format. Join us and learn how in Law School Admissions Panel epresentatives will discuss the law school admissions process and talk

  4. 11-level Cascaded H-bridge Grid-tied Inverter Interface with Solar Panels

    E-Print Network [OSTI]

    Tolbert, Leon M.

    11-level Cascaded H-bridge Grid-tied Inverter Interface with Solar Panels Faete Filho, Yue Cao multilevel DC-AC grid-tied inverter. Each inverter bridge is connected to a 200 W solar panel. OPAL-RT lab match. A novel SPWM scheme is proposed in this paper to be used with the solar panels that can account

  5. Design and Evaluation of a Modular Resonant Switched Capacitors Equalizer for PV Panels

    E-Print Network [OSTI]

    Design and Evaluation of a Modular Resonant Switched Capacitors Equalizer for PV Panels Shmuel (Sam of shaded panels in a serially connected PV array. The proposed solution is based on a modular approach module was designed for 185W PV panels and was found to boost the maximum available power by about 50

  6. Dying Green A Film Screening and Panel Discussion about Green Burial

    E-Print Network [OSTI]

    Virginia Tech

    Dying Green A Film Screening and Panel Discussion about Green Burial March 20, 2014 6:00pm ­ 8:00pm to rest. The "Green Burial" movement is catching on in the U.S., and green cemetery options are now and panel discussion of the award-winning documentary, Dying Green (2011). Panel participants include Joshua

  7. A Touch Panel using Silicone Rubber with embedded IR-LEDs Yuichiro Sakamoto,

    E-Print Network [OSTI]

    Tanaka, Jiro

    LED LED FTIR FTIR FTIR FTIR FTIR LED LED A Touch Panel using Silicone Rubber with embedded Shizuki and Jiro Tanaka In this paper, we present a novel touch panel using silicone rubber with embedded are difficult to detect for one made of acryl panel Moreover, it integrates IR-LEDs silicone rubber for multi

  8. JANUARY 2007 THE BP U.S. REFINERIES INDEPENDENT SAFETY REVIEW PANEL

    E-Print Network [OSTI]

    Leveson, Nancy

    OF JANUARY 2007 THE REPORT THE BP U.S. REFINERIES INDEPENDENT SAFETY REVIEW PANEL #12;From left;PANEL STATEMENT The B.P. U.S. Refineries Independent Safety Review Panel i Process safety accidents can be prevented. On March 23, 2005, the BP Texas City refinery experienced a catastrophic process accident

  9. An analytical model for the design of in-slab electric heating panels

    SciTech Connect (OSTI)

    Ritter, T.L.; Kilkis, B.I. [Heatway, Springfield, MO (United States)

    1998-10-01T23:59:59.000Z

    In this paper, a steady-state heat transfer model is described for design and sizing of electric radiant panel heating systems embedded in a slab. This model is applicable both for ceiling and floor panels. An approximate panel surface heat output algorithm is also given as a function of size and orientation of the heated space and outdoor exposure.

  10. Entanglement entropy in Galilean conformal field theories and flat holography

    E-Print Network [OSTI]

    Arjun Bagchi; Rudranil Basu; Daniel Grumiller; Max Riegler

    2014-10-15T23:59:59.000Z

    We present the analytical calculation of entanglement entropy for a class of two dimensional field theories governed by the symmetries of the Galilean conformal algebra, thus providing a rare example of such an exact computation. These field theories are the putative holographic duals to theories of gravity in three-dimensional asymptotically flat spacetimes. We provide a check of our field theory answers by an analysis of geodesics. We also exploit the Chern-Simons formulation of three-dimensional gravity and adapt recent proposals of calculating entanglement entropy by Wilson lines in this context to find an independent confirmation of our results from holography.

  11. Radion stabilization from the vacuum on flat extra dimensions

    SciTech Connect (OSTI)

    Santos, Eli [Departamento de Fisica, Universidad Autonoma Metropolitana, Apartado Postal 55-534, C. P. 09340 Mexico, D.F. (Mexico); Secretaria Academica de Fisica y Matematicas, Fac. de Ingenieria, Universidad Autonoma de Chiapas, Calle 4a. Oriente, Norte 1428, 29000 Tuxtla Gutierrez, Chiapas (Mexico); Perez-Lorenzana, A. [Departamento de Fisica, Centro de Investigacion y de Estudios Avanzados del I.P.N., Apartado Postal 14-740, 07000, Mexico, D.F. (Mexico); Pimentel, Luis O. [Departamento de Fisica, Universidad Autonoma Metropolitana, Apartado Postal 55-534, C. P. 09340 Mexico, D.F. (Mexico)

    2008-01-15T23:59:59.000Z

    Volume stabilization in models with flat extra dimensions could follow from vacuum energy residing in the bulk when translational invariance is spontaneously broken. We study a simple toy model that exemplifies this mechanism which considers a massive scalar field with nontrivial boundary conditions at the end points of the compact space, and includes contributions from brane and bulk cosmological constants. We perform our analysis in the conformal frame where the radion field, associated with volume variations, is defined, and present a general strategy for building stabilization potentials out of those ingredients. We also provide working examples for the interval and the T{sup n}/Z{sub 2} orbifold configuration.

  12. DOE - Office of Legacy Management -- Rocky Flats Petition

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group currentBradleyTableSelling7111A Lithologic andRECORDDPetition Rocky Flats

  13. Final Rocky Flats Cleanup Agreement, July 19, 1996 Summary

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011 Strategic Plan| Departmentof Ohio Environmental Protection AgencyFinalRocky Flats Cleanup

  14. West Ford Flat Geothermal Facility | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-fTri GlobalJump to: navigation,Goff, 2002)WellingtonInformationFlat

  15. Windy Flats(3Q09 portion) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-fTriWildcat 1 Wind Project Jump to:WilsonIIa extension Jump to:Flats

  16. Property:FlatDemandStructure | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag Jump to: navigation, search Property NameFirstWellDepth JumpFlatDemandStructure

  17. East Flat Rock, North Carolina: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model,DOE FacilityDimondale,South,Earlsboro,Canton, Ohio:Information FelicianaFlat

  18. Flat Plate PV Module Eligibility Listing Procedure Updated 6/2/14 Senate Bill 1 (SB1) defines the solar incentive programs for California, and flat plate PV

    E-Print Network [OSTI]

    Flat Plate PV Module Eligibility Listing Procedure Updated 6/2/14 Senate Bill 1 (SB1) defines the solar incentive programs for California, and flat plate PV modules 1 must be listed on the SB1 for adding PV modules to the SB1 list is as follows: 1 . Data submitted to the Energy Commission

  19. Selective posttranslational modification of phage-displayed polypeptides

    DOE Patents [OSTI]

    Tsao, Meng-Lin; Tian, Feng; Schultz, Peter

    2013-11-19T23:59:59.000Z

    The invention relates to posttranslational modification of phage-displayed polypeptides. These displayed polypeptides comprise at least one unnatural amino acid, e.g., an aryl-azide amino acid such as p-azido-L-phenylalanine, or an alkynyl-amino acid such as para-propargyloxyphenylalanine, which are incorporated into the phage-displayed fusion polypeptide at a selected position by using an in vivo orthogonal translation system comprising a suitable orthogonal aminoacyl-tRNA synthetase and a suitable orthogonal tRNA species. These unnatural amino acids advantageously provide targets for posttranslational modifications such as azide-alkyne [3+2] cycloaddition reactions and Staudinger modifications.

  20. Selective posttranslational modification of phage-displayed polypeptides

    DOE Patents [OSTI]

    Tsao, Meng-Lin; Tian, Feng; Schultz, Peter

    2013-02-05T23:59:59.000Z

    The invention relates to posttranslational modification of phage-displayed polypeptides. These displayed polypeptides comprise at least one unnatural amino acid, e.g., an aryl-azide amino acid such as p-azido-L-phenylalanine, or an alkynyl-amino acid such as para-propargyloxyphenylalanine, which are incorporated into the phage-displayed fusion polypeptide at a selected position by using an in vivo orthogonal translation system comprising a suitable orthogonal aminoacyl-tRNA synthetase and a suitable orthogonal tRNA species. These unnatural amino acids advantageously provide targets for posttranslational modifications such as azide-alkyne [3+2]cycloaddition reactions and Staudinger modifications.

  1. Rocky Flats CAAS System Recalibrated, Retested, and Analyzed to Install in the Criticality Experiments Facility at the Nevada Test Site

    SciTech Connect (OSTI)

    Kim, S; Heinrichs, D; Biswas, D; Huang, S; Dulik, G; Scorby, J; Boussoufi, M; Liu, B; Wilson, R

    2009-05-27T23:59:59.000Z

    Neutron detectors and control panels transferred from the Rocky Flats Plant (RFP) were recalibrated and retested for redeployment to the CEF. Testing and calibration were successful with no failure to any equipment. Detector sensitivity was tested at a TRIGA reactor, and the response to thermal neutron flux was satisfactory. MCNP calculated minimum fission yield ({approx} 2 x 10{sup 15} fissions) was applied to determine the thermal flux at selected detector positions at the CEF. Thermal flux levels were greater than 6.39 x 10{sup 6} (n/cm{sup 2}-sec), which was about four orders of magnitude greater than the minimum alarm flux. Calculations of detector survivable distances indicate that, to be out of lethal area, a detector needs to be placed greater than 15 ft away from a maximum credible source. MCNP calculated flux/dose results were independently verified by COG. CAAS calibration and the testing confirmed that the RFP CAAS system is performing its functions as expected. New criteria for the CAAS detector placement and 12-rad zone boundaries at the CEF are established. All of the CAAS related documents and hardware have been transferred from LLNL to NSTec for installation at the CEF high bay areas.

  2. Aluminum Foil Mediated Noncatalytic Growth of ZnO Nanowire Arrays on an Indium Tin Oxide Substrate

    E-Print Network [OSTI]

    Kim, Bongsoo

    substrate would find useful applications in field emission displays and solar cells. Introduction Zinc oxide in optoelectronics such as field emission displays (FEDs) and solar cells.3,4 Developing convenient and reproducible applications because it has been widely used as a transparent electrode in conventional flat panel displays

  3. Using Surface Impedance for Calculating Wakefields in Flat Geometry

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Bane, Karl; Stupakov, Gennady

    2015-03-01T23:59:59.000Z

    Beginning with Maxwell's equations and assuming only that the wall interaction can be approximated by a surface impedance, we derive formulas for the generalized longitudinal and transverse impedance in flat geometry, from which the wakefields can also be obtained. From the generalized impedances, by taking the proper limits, we obtain the normal longitudinal, dipole, and quad impedances in flat geometry. These equations can be applied to any surface impedance, such as the known dc, ac, and anomalous skin models of wall resistance, a model of wall roughness, or one for a pipe with small, periodic corrugations. We show that, formore »the particular case of dc wall resistance, the longitudinal impedance obtained here agrees with a known result in the literature, a result that was derived from a very general formula by Henke and Napoly. As concrete example, we apply our results to representative beam and machine parameters in the undulator region of LCLS-II and estimate the impact of the transverse wakes on the machine performance.« less

  4. Geologic and geotechnical assessment RFETS Building 371, Rocky Flats, Colorado

    SciTech Connect (OSTI)

    Maryak, M.E.; Wyatt, D.E.; Bartlett, S.F.; Lewis, M.R.; Lee, R.C.

    1995-12-13T23:59:59.000Z

    This report describes the review and evaluation of the geological, geotechnical and geophysical data supporting the design basis analysis for the Rocky Flats Environmental Test Site (RFETS) Building 371. The primary purpose of the geologic and geotechnical reviews and assessments described herein are to assess the adequacy of the crustal and near surface rock and soil model used in the seismic analysis of Building 371. This review was requested by the RFETS Seismic Evaluation Program. The purpose was to determine the adequacy of data to support the design basis for Building 371, with respect to seismic loading. The objectives required to meet this goal were to: (1) review techniques used to gather data (2) review analysis and interpretations of the data; and (3) make recommendations to gather additional data if required. Where there were questions or inadequacies in data or interpretation, recommendations were made for new data that will support the design basis analysis and operation of Building 371. In addition, recommendations are provided for a geologic and geophysical assessment for a new facility at the Rocky Flats Site.

  5. Using Surface Impedance for Calculating Wakefields in Flat Geometry

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Bane, Karl; Stupakov, Gennady

    2015-03-01T23:59:59.000Z

    Beginning with Maxwell's equations and assuming only that the wall interaction can be approximated by a surface impedance, we derive formulas for the generalized longitudinal and transverse impedance in flat geometry, from which the wakefields can also be obtained. From the generalized impedances, by taking the proper limits, we obtain the normal longitudinal, dipole, and quad impedances in flat geometry. These equations can be applied to any surface impedance, such as the known dc, ac, and anomalous skin models of wall resistance, a model of wall roughness, or one for a pipe with small, periodic corrugations. We show that, for the particular case of dc wall resistance, the longitudinal impedance obtained here agrees with a known result in the literature, a result that was derived from a very general formula by Henke and Napoly. As concrete example, we apply our results to representative beam and machine parameters in the undulator region of LCLS-II and estimate the impact of the transverse wakes on the machine performance.

  6. PAPILLON: Designing Curved Display Surfaces With Printed Optics

    E-Print Network [OSTI]

    Poupyrev, Ivan

    . It is based on 3D printed optics, where the surface of the display is constructed as a bundle of printed light Interfaces - Graphical user interfaces; Input devices and strategies. Keywords: 3D printing, fabrication

  7. Displays take new shape: An agenda for future interactive surfaces

    E-Print Network [OSTI]

    Benko, Hrvoje

    This workshop provides a forum for discussing emerging trends in interactive surfaces that leverage alternative display types and form factors to enable more expressive interaction with information. The goal of the workshop ...

  8. Tactual Display of Consonant Voicing to Supplement Lipreading

    E-Print Network [OSTI]

    Yuan, Hanfeng

    2004-10-07T23:59:59.000Z

    This research is concerned with the development of tactual displays to supplement the information available through lipreading. Because voicing carries a high informational load in speech and is not well transmitted through ...

  9. acrab mutants display: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    This novel approach to display technology consists of arranging six organic light emitting diode screens in a cubic form factor. We ... Pla i Conesa, Pol 20 Advances in Brief...

  10. INTER-MOUNTAIN BASINS SHALE BADLAND extent exaggerated for display

    E-Print Network [OSTI]

    INTER-MOUNTAIN BASINS SHALE BADLAND R.Rondeau extent exaggerated for display ACHNATHERUM HYMENOIDES HERBACEOUS ALLIANCE Achnatherum hymenoides Shale Barren Herbaceous Vegetation ARTEMISIA BIGELOVII SHRUBLAND ALLIANCE Leymus salinus Shale Sparse Vegetation Overview: This widespread ecological system

  11. ROCKY MOUNTAIN ASPEN FOREST AND WOODLAND extent exaggerated for display

    E-Print Network [OSTI]

    ROCKY MOUNTAIN ASPEN FOREST AND WOODLAND R.Rondeau extent exaggerated for display POPULUS. The herbaceous layers may be lush and diverse. Common graminoids may include Bromus ROCKY MOUNTAIN ASPEN WOODLAND

  12. A programmable pilot oriented display system for GA aircraft

    E-Print Network [OSTI]

    Littlefield, James A.

    1982-01-01T23:59:59.000Z

    This report presents a complete description of a digital flight data processing platform designed to support a range of airborne or flight simulator based experiments requiring the acquisition, processing, and display of ...

  13. Multifunctional recombinant phycobiliprotein-based fluorescent constructs and phycobilisome display

    DOE Patents [OSTI]

    Glazer, Alexander N.; Cai, Yuping

    2007-01-30T23:59:59.000Z

    The invention provides multifunctional fusion constructs which are rapidly incorporated into a macromolecular structure such as a phycobilisome such that the fusion proteins are separated from one another and unable to self-associate. The invention provides methods and compositions for displaying a functional polypeptide domain on an oligomeric phycobiliprotein, including fusion proteins comprising a functional displayed domain and a functional phycobiliprotein domain incorporated in a functional oligomeric phycobiliprotein. The fusion proteins provide novel specific labeling reagents.

  14. Multifunctional recombinant phycobiliprotein-based fluorescent constructs and phycobilisome display

    DOE Patents [OSTI]

    Glazer, Alexander N.; Cai, Yuping

    2007-02-13T23:59:59.000Z

    The invention provides multifunctional fusion constructs which are rapidly incorporated into a macromolecular structure such as a phycobilisome such that the fusion proteins are separated from one another and unable to self-associate. The invention provides methods and compositions for displaying a functional polypeptide domain on an oligomeric phycobiliprotein. including fusion proteins comprising a functional displayed domain and a functional phycobiliprotein domain incorporated in a functional oligomeric phycobiliprotein. The fusion proteins provide novel specific labeling reagents.

  15. Multifunctional recombinant phycobiliprotein-based fluorescent constructs and phycobilisome display

    DOE Patents [OSTI]

    Glazer, Alexander N.; Cai, Yuping

    2003-11-18T23:59:59.000Z

    The invention provides multifunctional fusion constructs which are rapidly incorporated into a macromolecular structure such as a phycobilisome such that the fusion proteins are separated from one another and unable to self-associate. The invention provides methods and compositions for displaying a functional polypeptide domain on an oligomeric phycobiliprotein, including fusion proteins comprising a functional displayed domain and a functional phycobiliprotein domain incorporated in a functional oligomeric phycobiliprotein. The fusion proteins provide novel specific labeling reagents.

  16. Silica powders for powder evacuated thermal insulating panel and method

    DOE Patents [OSTI]

    Harris, M.T.; Basaran, O.A.; Kollie, T.G.; Weaver, F.J.

    1996-01-02T23:59:59.000Z

    A powder evacuated thermal insulating panel using generally spherical and porous silica particles of a median size less than about 100 nanometers in diameter, a pour packing density of about 0.4 to 0.6 g/cm{sup 3} and an external surface area in the range of about 90 to 600 m{sup 2}/g is described. The silica powders are prepared by reacting a tetraalkyl silicate with ammonia and water in an alcohol solvent, distilling the solution after the reaction to remove the ammonia and recover the alcohol. The resulting aqueous slurry was dried, ball-milled, and dried again to provide the silica particles with defined internal and external porosity. The nanometer size and the large external surface area of the silica particles along with the internal and external porosity of the silica particles provide powder evacuated thermal insulating panels with significantly higher R-values than obtainable using previously known silica powders. 2 figs.

  17. Silica powders for powder evacuated thermal insulating panel and method

    DOE Patents [OSTI]

    Harris, Michael T. (Knoxville, TN); Basaran, Osman A. (Oak Ridge, TN); Kollie, Thomas G. (Oak Ridge, TN); Weaver, Fred J. (Knoxville, TN)

    1996-01-01T23:59:59.000Z

    A powder evacuated thermal insulating panel using generally spherical and porous silica particles of a median size less than about 100 nanometers in diameter, a pour packing density of about 0.4 to 0.6 g/cm.sup.3 and an external surface area in the range of about 90 to 600 m.sup.2/ g is described. The silica powders are prepared by reacting a tetraakyl silicate with ammonia and water in an alcohol solvent, distilling the solution after the reaction to remove the ammonia and recover the alcohol. The resulting aqueous slurry was dried, ball-milled, and dried again to provide the silica particles with defined internal and external porosity. The nanometer size and the large external surface area of the silica particles along with the internal and external porosity of the silica particles provide powder evacuated thermal insulating panels with significantly higher R-values than obtainable using previously known silica powders.

  18. Silica powders for powder evacuated thermal insulating panel and method

    DOE Patents [OSTI]

    Harris, Michael T. (Knoxville, TN); Basaran, Osman A. (Oak Ridge, TN); Kollie, Thomas G. (Oak Ridge, TN); Weaver, Fred J. (Knoxville, TN)

    1994-01-01T23:59:59.000Z

    A powder evacuated thermal insulating panel using generally spherical and porous silica particles of a median size less than about 100 nanometers in diameter, a pour packing density of about 0.4 to 0.6 g/cm.sup.3 and an external surface area in the range of about 90 to 600 m.sup.2 /g is described. The silica powders are prepared by reacting a tetraakyl silicate with ammonia and water in an alcohol solvent, distilling the solution after the reaction to remove the ammonia and recover the alcohol. The resulting aqueous slurry was dried, ball-milled, and dried again to provide the silica particles with defined internal and external porosity. The nanometer size and the large external surface area of the silica particles along with the internal and external porosity of the silica particles provide powder evacuated thermal insulating panels with significantly higher R-values than obtainable using previously known silica powders.

  19. Silica powders for powder evacuated thermal insulating panel and method

    DOE Patents [OSTI]

    Harris, Michael T. (Knoxville, TN); Basaran, Osman A. (Oak Ridge, TN); Kollie, Thomas G. (Oak Ridge, TN); Weaver, Fred J. (Knoxville, TN)

    1995-01-01T23:59:59.000Z

    A powder evacuated thermal insulating panel using generally spherical and porous silica particles of a median size less than about 100 nanometers in diameter, a pour packing density of about 0.4 to 0.6 g/cm.sup.3 and an external surface area in the range of about 90 to 600 m.sup.2/ g is described. The silica powders are prepared by reacting a tetraakyl silicate with ammonia and water in an alcohol solvent, distilling the solution after the reaction to remove the ammonia and recover the alcohol. The resulting aqueous slurry was dried, ball-milled, and dried again to provide the silica particles with defined internal and external porosity. The nanometer size and the large external surface area of the silica particles along with the internal and external porosity of the silica particles provide powder evacuated thermal insulating panels with significantly higher R-values than obtainable using previously known silica powders.

  20. Structural behavior of silicone bonded glass block panels

    SciTech Connect (OSTI)

    Chang, K.F. [Structural Engineering Associates, Inc., San Antonio, TX (United States); Sandberg, L.B. [Michigan Technological Univ. Houghton, MI (United States)

    1996-12-31T23:59:59.000Z

    Silicone sealant was submitted for mortar in bonding glass blocks. The sealant`s tensile and shear strengths and stiffnesses were determined. Joints bonding two glass blocks were tested for stiffness and strength in tension, bending, out-of-plane shear, and in-plane shear. Bending tests were done on specimens one block wide and four blocks long to evaluate one-way bending behavior. A six block by six block panel, supported on all four sides, was built and tested under simulated wind load. An analytical model with material nonlinearity in the joints was developed for the one-way bending case. It gave good comparisons with the experimental data to load levels approaching failure. A more complex analytical model was developed for the two-way panel. It was only valid for lower load levels, in the range of potential allowable design loads, but compared well with test results. Silicone bonded glass block panels have potential for meeting the wind load requirements necessary for exterior use.

  1. The inverse problems of wing panel manufacture processes

    SciTech Connect (OSTI)

    Oleinikov, A. I., E-mail: a.i.oleinikov@mail.ru [Komsomolsk-on-Amur State Technical University, Lenina prospect 27, Komsomolsk-on-Amur, 681013, Russian Federation, and Institute of Machinery and Metallurgy Far Eastern Branch of the Russian Academy of Sciences, Metallurgov Street 1, Komsomolsk-on-Am (Russian Federation); Bormotin, K. S., E-mail: cvmi@knastu.ru [Komsomolsk-on-Amur State Technical University, Lenina prospect 27, Komsomolsk-on-Amur, 681013, Russian Federation (Russian Federation)

    2013-12-16T23:59:59.000Z

    It is shown that inverse problems of steady-state creep bending of plates in both the geometrically linear and nonlinear formulations can be represented in a variational formulation. Steady-state values of the obtained functionals corresponding to the solutions of the problems of inelastic deformation and springback are determined by applying a finite element procedure to the functionals. Optimal laws of creep deformation are formulated using the criterion of minimizing damage in the functionals of the inverse problems. The formulated problems are reduced to the problems solved by the finite element method using MSC.Marc software. Currently, forming of light metals poses tremendous challenges due to their low ductility at room temperature and their unusual deformation characteristics at hot-cold work: strong asymmetry between tensile and compressive behavior, and a very pronounced anisotropy. We used the constitutive models of steady-state creep of initially transverse isotropy structural materials the kind of the stress state has influence. The paper gives basics of the developed computer-aided system of design, modeling, and electronic simulation targeting the processes of manufacture of wing integral panels. The modeling results can be used to calculate the die tooling, determine the panel processibility, and control panel rejection in the course of forming.

  2. Plastic substrates for active matrix liquid crystal display incapable of withstanding processing temperature of over 200.degree. C and method of fabrication

    DOE Patents [OSTI]

    Carey, Paul G. (Mountain View, CA); Smith, Patrick M. (San Ramon, CA); Havens, John (San Diego, CA); Jones, Phil (Marlborough, GB)

    1999-01-01T23:59:59.000Z

    Bright-polarizer-free, active-matrix liquid crystal displays (AMLCDs) are formed on plastic substrates. The primary components of the display are a pixel circuit fabricated on one plastic substrate, an intervening liquid-crystal material, and a counter electrode on a second plastic substrate. The-pixel circuit contains one or more thin-film transistors (TFTs) and either a transparent or reflective pixel electrode manufactured at sufficiently low temperatures to avoid damage to the plastic substrate. Fabrication of the TFTs can be carried out at temperatures less than 100.degree. C. The liquid crystal material is a commercially made nematic curvilinear aligned phase (NCAP) film. The counter electrode is comprised of a plastic substrate coated with a transparent conductor, such as indium-doped tin oxide (ITO). By coupling the active matrix with NCAP, a high-information content can be provided in a bright, fully plastic package. Applications include any low cost portable electronics containing flat displays where ruggedization of the display is desired.

  3. Plastic substrates for active matrix liquid crystal display incapable of withstanding processing temperature of over 200 C and method of fabrication

    DOE Patents [OSTI]

    Carey, P.G.; Smith, P.M.; Havens, J.H.; Jones, P.

    1999-01-05T23:59:59.000Z

    Bright-polarizer-free, active-matrix liquid crystal displays (AMLCDs) are formed on plastic substrates. The primary components of the display are a pixel circuit fabricated on one plastic substrate, an intervening liquid-crystal material, and a counter electrode on a second plastic substrate. The-pixel circuit contains one or more thin-film transistors (TFTs) and either a transparent or reflective pixel electrode manufactured at sufficiently low temperatures to avoid damage to the plastic substrate. Fabrication of the TFTs can be carried out at temperatures less than 100 C. The liquid crystal material is a commercially made nematic curvilinear aligned phase (NCAP) film. The counter electrode is comprised of a plastic substrate coated with a transparent conductor, such as indium-doped tin oxide (ITO). By coupling the active matrix with NCAP, a high-information content can be provided in a bright, fully plastic package. Applications include any low cost portable electronics containing flat displays where ruggedization of the display is desired. 12 figs.

  4. Sitewide risk perspectives for the Rocky Flats Environmental Technology Site

    SciTech Connect (OSTI)

    Olinger, S.J. [Dept. of Energy, Golden, CO (United States). Rocky Flats Field Office; Foppe, T.L. [M.H. Chew and Associates, Inc., Golden, CO (United States)

    1998-05-01T23:59:59.000Z

    The US Department of Energy (DOE) has recently finalized a closure plan (originally called the Ten Year Plan) for closure and environmental cleanup of previous nuclear weapons facilities. The DOE Rocky Flats Field Office has established priorities for risk reduction work to Support closure activities, as well as addressing those hazards associated with storage and management of radioactive materials and hazardous chemicals. To provide information for future National Environmental Policy Act (NEPA) or other regulatory assessments of specific risk reduction projects identified in the Closure Plan, a risk assessment of normal operations and potential accidents was recently prepared to provide an updated baseline of the cumulative impacts to the worker, public and environment due to the Site`s operations, activities, and environmental conditions in light of the Site`s change in mission, and of future closure projects. This paper summarizes the risk assessment approach, results, and conclusions.

  5. Epidemiologic surveillance. Annual report for EG&G Rocky Flats

    SciTech Connect (OSTI)

    NONE

    1994-12-31T23:59:59.000Z

    Epidemiologic surveillance at U.S. Department of Energy (DOE) facilities consists of regular and systematic collection, analysis, and interpretation of data on absences resulting from illness and injury in the work force. Its purpose is to provide an early warning system for health problems occurring among employees at participating sites. Data are collected by coordinators at each site and submitted to the Epidemiologic Surveillance Data Center, located at the Oak Ridge Institute for Science and Education, where quality control procedures and analyses are carried out. Rates of absences and rates of diagnoses associated with absences are analyzed by occupation and other relevant variables. They may be compared with the disease experience of different groups within the DOE work force and with populations that do not work for DOE to identify disease patterns or clusters that may be associated with work activities. This report presents the 1994 morbidity data for the Rocky Flats plant.

  6. System Advisor Model: Flat Plate Photovoltaic Performance Modeling Validation Report

    SciTech Connect (OSTI)

    Freeman, J.; Whitmore, J.; Kaffine, L.; Blair, N.; Dobos, A. P.

    2013-12-01T23:59:59.000Z

    The System Advisor Model (SAM) is a free software tool that performs detailed analysis of both system performance and system financing for a variety of renewable energy technologies. This report provides detailed validation of the SAM flat plate photovoltaic performance model by comparing SAM-modeled PV system generation data to actual measured production data for nine PV systems ranging from 75 kW to greater than 25 MW in size. The results show strong agreement between SAM predictions and field data, with annualized prediction error below 3% for all fixed tilt cases and below 8% for all one axis tracked cases. The analysis concludes that snow cover and system outages are the primary sources of disagreement, and other deviations resulting from seasonal biases in the irradiation models and one axis tracking issues are discussed in detail.

  7. Majorana Flat Bands in s-Wave Gapless Topological Superconductors

    E-Print Network [OSTI]

    Shusa Deng; Gerardo Ortiz; Amrit Poudel; Lorenza Viola

    2014-04-28T23:59:59.000Z

    We demonstrate how the non-trivial interplay between spin-orbit coupling and nodeless $s$-wave superconductivity can drive a fully gapped two-band topological insulator into a time-reversal invariant gapless topological superconductor supporting symmetry-protected Majorana flat bands. We characterize topological phase diagrams by a ${\\mathbb Z}_2 \\times{\\mathbb Z}_2$ partial Berry-phase invariant, and show that, despite the trivial crystal geometry, no unique bulk-boundary correspondence exists. We trace this behavior to the anisotropic quasiparticle bulk gap closing, linear vs. quadratic, and argue that this provides a unifying principle for gapless topological superconductivity. Experimental implications for tunneling conductance measurements are addressed, relevant for lead chalcogenide materials.

  8. An Assessment of Inertial Confinement Fusion Target Physics A Panel on Fusion Target Physics ("the Panel") will serve as a technical resource to the

    E-Print Network [OSTI]

    An Assessment of Inertial Confinement Fusion Target Physics A Panel on Fusion Target Physics ("the Panel") will serve as a technical resource to the Committee on Inertial Confinement Energy Systems ("the Physics will prepare a report that will assess the current performance of fusion targets associated

  9. The Planck quantum hypothesis and the Friedmannian models of flat universe

    E-Print Network [OSTI]

    V. Skalsky

    2000-09-25T23:59:59.000Z

    Only one model from an infinite number of the Friedmannian models of flat expansive isotropic and homogeneous universe satisfies the assumptions resulting from the Planck quantum hypothesis.

  10. Flat space cosmologies in two dimensions - Phase transitions and asymptotic mass-domination

    E-Print Network [OSTI]

    Arjun Bagchi; Daniel Grumiller; Jakob Salzer; Sourav Sarkar; Friedrich Schöller

    2014-08-22T23:59:59.000Z

    We study flat space cosmologies in two dimensions by taking the flat space limit of the Achucarro-Ortiz model. We unravel a phase transition between hot flat space and flat space cosmologies, and derive a new dilaton-dependent counterterm required for the consistency of the Euclidean partition function. Our results generalize to asymptotically mass-dominated 2-dimensional dilaton gravity models, whose thermodynamical properties we discuss. The novel case of asymptotic mass-domination is neither covered by the comprehensive discussion of hep-th/0703230 nor by the more recent generalization to dilaton gravity with confining U(1) charges in 1406.7007.

  11. Producing EGS4 shower displays with the Unified Graphics System

    SciTech Connect (OSTI)

    Cowan, R.F. (Massachusetts Inst. of Tech., Cambridge, MA (USA). Lab. for Nuclear Science); Nelson, W.R. (Stanford Linear Accelerator Center, Menlo Park, CA (USA))

    1990-08-16T23:59:59.000Z

    The EGS4 Code System has been coupled with the SLAC Unified Graphics System in such a manner as to provide a means for displaying showers on UGS77-supported devices. This is most easily accomplished by attaching an auxiliary subprogram package (SHOWGRAF) to existing EGS4 User Codes and making use of a graphics display or a post-processor code called EGS4PL. SHOWGRAF may be used to create shower displays directly on interactive IBM 5080 color display devices, supporting three-dimensional rotations, translations, and zoom features, and providing illustration of particle types and energies by color and/or intensity. Alternatively, SHOWGRAF may be used to record a two-dimensional projection of the shower in a device-independent graphics file. The EGS4PL post-processor may then be used to convert this file into device-dependent graphics code for any UGS77-supported device. Options exist within EGS4PL that allow for two-dimensional translations and zoom, for creating line structure to indicate particle types and energies, and for optional display of particles by type. All of this is facilitated by means of the command processor EGS4PL EXEC together with new options (5080 and PDEV) with the standard EGS4IN EXEC routine for running EGS4 interactively under VM/SP. 6 refs.

  12. Energy-efficient monitors: An overview

    SciTech Connect (OSTI)

    Norford, L.; Dandridge, C.; Bosko, K.

    1995-12-01T23:59:59.000Z

    It is reasonable to evaluate displays on the basis of the technology used to create an image: video displays that employ cathode-ray tubes (CRTs) versus several technologies that are used in flat-panel displays. This paper considers both monochrome and color displays, and determines their energy consumption on an equal area basis. It will also examine power management possibilities for both types of displays.

  13. DATA ACQUISITION, HANDLING, AND DISPLAY FOR THE HEATER EXPERIMENTS AT STRIPA

    E-Print Network [OSTI]

    McEvoy, M.B.

    2011-01-01T23:59:59.000Z

    graphics terminal. Displays are defined by Display Controlgraphics software was designed to prompt users by presenting them with lists of options. Users control

  14. Storage tank insulation panels that offer fire protection

    SciTech Connect (OSTI)

    Stancroff, M. [Pittsburgh Corning Corp., Houston, TX (United States)

    1995-12-31T23:59:59.000Z

    Many fluids require storage temperatures of over several hundred degrees above ambient. As a result of these elevated storage temperatures many storage tanks require insulation to help in both energy conservation and in maintaining a uniform fluid temperature distribution. Since these fluids are typically flammable these storage tanks also often require some sort of fire protection. One of the most commonly used methods of fire protection is a deluge system. Actively operated deluge systems, although effective when working properly, have several drawbacks. A cellular glass insulation panel system can provide not only excellent insulation value but also passive fire protection without the concern of an active system failure.

  15. Toward integrated PV panels and power electronics using printing technologies

    SciTech Connect (OSTI)

    Ababei, Cristinel; Yuvarajan, Subbaraya [Electrical and Computer Engineering Department, North Dakota State University, Fargo, ND 58108 (United States); Schulz, Douglas L. [Center for Nanoscale Science and Engineering, North Dakota State University, Fargo, ND 58102 (United States)

    2010-07-15T23:59:59.000Z

    In this paper, we review the latest developments in the area of printing technologies with an emphasis on the fabrication of control-embedded photovoltaics (PV) with on-board active and passive devices. We also review the use of power converters and maximum power point tracking (MPPT) circuits with PV panels. Our focus is on the investigation of the simplest implementations of such circuits in view of their integration with solar cells using printing technologies. We see this concept as potentially enabling toward further cost reduction. Besides a discussion as to feasibility, we shall also present some projections and guidelines toward possible integration. (author)

  16. Large Panels with Common Factors and Spatial Correlations

    E-Print Network [OSTI]

    Hashem, Pesaran

    ;1 (#6;t) is bounded for all N , then under the granularity conditions (13)-(14) we have lim N!1 V ar(w0t#0;1zt jIt#0;1 ) = 0: A particular form of a CWD process arises when pairwise correlations take non-zero values only across ?nite subsets of units... sectional samples with strong co-movements. Panels with common factors have been applied to characterize the dynamic of stock and bond returns (Chamberlain and Rothschild 1983; Connor and Korajczyk, 1993; Kapetanios and Pesaran, 2007), and in macroeconomics...

  17. Estimation of untrained sensory panel variation and repeatability

    E-Print Network [OSTI]

    Hovenden, Jeanne Elizabeth

    1977-01-01T23:59:59.000Z

    ES"Ii~1ATION OF UNTRAINED SENSORE PANL'L VARIATION AND REPEATABILITY A Thesis by JEANNE ELI'iABETH HOvE11DEN Submitted to tbe Graduate Colle9e of Texas ASH University in Partial fulfullment of tk. e requirements of t11e deqree of MASTER... OF SCIENCF December 1977 Major Subject: Arimal Science ESTIMATION OF UNTRAINED SENSORY PANEL VARIATION AND REP"ATABILITY A Thesis by JEANNE ELIZABETH HOVENDEN Approved as to style and content by: Chairs n of Committee Head of Department Member Memb...

  18. Glass Coating Makes Solar Panels More Efficient | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdf Flash2006-52.pdf0.pdfDepartmentCounselGlass Coating Makes Solar Panels More

  19. Biosurveillance panel to address essential science for public health

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041clothAdvanced Materials Advanced Materials Find Find MoreTechnicalBiomimeticSupportingPanel to

  20. PANEL OP CONSULTrnS MEETING ON RULISON

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA groupTuba City, Arizona, DisposalFourthN V O 1 8 7 +NewAugust 4,P -.,. ~ *PANEL

  1. Learning Manifolds with K-Means and K-Flats Guille D. Canas ,

    E-Print Network [OSTI]

    Poggio, Tomaso

    Learning Manifolds with K-Means and K-Flats Guille D. Canas , Tomaso Poggio , Lorenzo A. Rosasco samples. In particular, we consider piecewise constant and piecewise linear estima- tors induced by k-means and k-flats, and analyze their performance. We extend previous results for k-means in two separate

  2. Holographic Dark Energy with Time Varying n^2 Parameter in Non-Flat Universe

    E-Print Network [OSTI]

    Bushra Majeed; Mubasher Jamil; Azad A. Siddiqui

    2014-11-01T23:59:59.000Z

    We consider a holographic dark energy model, with a varying parameter, n, which evolves slowly with time. We obtain the differential equation describing evolution of the dark energy density parameter, $\\Omega_d$, for the flat and non-flat FRW universes. The equation of state parameter in this generalized version of holographic dark energy depends on n.

  3. NASA/DOE/DOD nuclear propulsion technology planning: Summary of FY 1991 interagency panel results

    SciTech Connect (OSTI)

    Clark, J.S.; Wickenheiser, T.J.; Doherty, M.P.; Marshall, A.; Bhattacharryya, S.K.; Warren, J.

    1992-01-01T23:59:59.000Z

    Interagency (NASA/DOE/DOD) technical panels worked in 1991 to evaluate critical nuclear propulsion issues, compare nuclear propulsion concepts for a manned Mars mission on a consistent basis, and to continue planning a technology development project for the Space Exploration Initiative (SEI). Panels were formed to address mission analysis, nuclear facilities, safety policy, nuclear fuels and materials, nuclear electric propulsion technology, and nuclear thermal propulsion technology. A summary of the results and recommendations of the panels is presented.

  4. Fusion Energy Advisory Committee (FEAC): Panel 7 report on Inertial Fusion Energy

    SciTech Connect (OSTI)

    Davidson, R.; Ripin, B.; Abdou, M.; Baldwin, D.E.; Commisso, R.; Dean, S.O.; Herrmannsfeldt, W.; Lee, E.; Lindl, J.; McCrory, R. [Princeton Univ., NJ (United States)] [and others

    1994-09-01T23:59:59.000Z

    The charge to FEAC Panel 7 on inertial fusion energy (IFE) is encompassed in the four articles of correspondence. To briefly summarize, the scope of the panel`s review and analysis adhered to the following guidelines. (1) Consistent with previous recommendations by the Fusion Policy Advisory Committee (FPAC) and the National Academy of Science (NAS) panel on inertial fusion, the principal focus of FEAC Panel 7`s review and planning activities for next-generation experimental facilities in IFE was limited to heavy ions. (2) The panel considered the three budget cases: $5M, $10M, and $15M annual funding at constant level-of-effort (FY92 dollars), with a time horizon of about five years. (3) While limiting the analysis of next-generation experimental facilities to heavy ions, the panel assessed both the induction and rf linac approaches, and factored European plans into its considerations as well. (4) Finally, the panel identified high-priority areas in system studies and supporting IFE technologies, taking into account how IFE can benefit from related activities funded by the Office of Fusion Energy and by Defense Programs. This report presents the technical assessment, findings, and recommendations on inertial fusion energy prepared by FEAC Panel 7.

  5. E-Print Network 3.0 - automobile front panel Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    control, DC motor... control, water temperature control, high-speed train tilt control, solar panel pointing, ultra Source: New Hampshire, University of - Department of...

  6. Report of the Blue Ribbon Panel on the Review of the Radiation...

    Broader source: Energy.gov (indexed) [DOE]

    October 11, 1995 This report summarizes the findings of the Blue Ribbon Panel's review of the RERF scientific projects and future research plans The report recommended that the...

  7. Energy Materials and Processes, An EMSL Science Theme Advisory Panel Workshop

    SciTech Connect (OSTI)

    Burk, Linda H.

    2014-12-16T23:59:59.000Z

    The report summarizes discussions at the Energy Materials and Process EMSL Science Theme Advisory Panel Workshop held July 7-8, 2014.

  8. Intelligent Daylight Panel Control System based on Fuzzy Control for Green Buildings

    E-Print Network [OSTI]

    T. C. Kuo; J. S. Lin; Y. Takeuchi; Y. J. Huang

    Abstract—This paper proposes an intelligent daylight panel control system based on fuzzy control theory for green buildings. The goal of this research is to automatically modulate sunlight efficiently and to enhance the quality of interior illuminations, thus reducing the need for artificial lighting and conserving energy. Daylight panels are typically installed on the outside of windows. By applying the proposed fuzzy controller, the reflection angle of daylight panels could be adjusted and optimized so that interior illuminative quality is improved and energy-saving is achieved at the same time. Index Terms—daylight panel, intelligent control, fuzzy control. I.

  9. Estimation of Two Popular Econometric Models: Random Effects Panel Data Model and Simultaneous Equations Model

    E-Print Network [OSTI]

    Liu, Yue

    2013-01-01T23:59:59.000Z

    1994. [9] Greene, W. B. , Econometric Analysis, Pearson /and Semiparametric Panel Econometric Models: Estimation andDEPendent models. This econometric software package was

  10. Report of the Senior Review Panel on the Review of the Radiation...

    Energy Savers [EERE]

    Publications Radiation Effects Research Foundation Links Past and Future Report of the Blue Ribbon Panel on the Review of the Radiation Effects Research Foundation Commemoration...

  11. Report on Hydrogen Storage Panel Findings in DOE-BES Sponsored...

    Broader source: Energy.gov (indexed) [DOE]

    Basic Energy Sciences Basic Energy Sciences DOEEERE Hydrogen Storage Pre-Solicitation Meeting, June 19, 2003 Report on Hydrogen Storage Panel Findings in Report on Hydrogen...

  12. Journal of the Korean Physical Society, Vol. 50, No. 3, March 2007, pp. 622625 Al-ZnO Thin Films as Transparent Conductive Oxides : Synthesis,

    E-Print Network [OSTI]

    Boo, Jin-Hyo

    , and low-tech applications, such as antistatic coatings, touch display panels, solar cells, flat panel exhibit n-type conduction. It is caused by a deviation from stoichiometry due to native defects-31-290-7075; Department of Chemistry, Sungkyunkwan University, Suwon 440- 746 on glass substrates at different target

  13. Transmittance from visible to mid infra-red in AZO films grown by atomic layer deposition system

    E-Print Network [OSTI]

    Tanner, David B.

    found applications in thin film photovoltaics such as CdTe and CIGS based solar cells (Dhere et al for solar cells, flat panel displays, LCD electrodes, touch panel transparent contacts and IR win- dows Westgate a , D.I. Koukis b , D.J. Arenas c , D.B. Tanner b a Center for Autonomous Solar Power, Binghamton

  14. pubs.acs.org/cmPublished on Web 08/09/2010r 2010 American Chemical Society Chem. Mater. 2010, 22, 49394949 4939

    E-Print Network [OSTI]

    of applications in solar energy conversion systems, optoelectronic devi- ces, electrodes of flat-panel displays and touch panels, selective filters for solar thermal collectors, spectrally selec- tive windows of magnitude as the Sn/In atomic ratio increases from 0 to 0.1. After heating in air at 600 °C, 200-300 nm

  15. FRACTAL DESCRIPTION OF ROUGH SURFACES FOR HAPTIC DISPLAY

    E-Print Network [OSTI]

    Stanford University

    FRACTAL DESCRIPTION OF ROUGH SURFACES FOR HAPTIC DISPLAY A DISSERTATION SUBMITTED TO THE DEPARTMENT system using fractals. A background on traditional methods for describing surface roughness is given. Fractals are used to characterize one- dimensional surface profiles using two parameters, the amplitude

  16. ON THE IDENTIFICATION AND HAPTIC DISPLAY OF FRICTION

    E-Print Network [OSTI]

    Stanford University

    ON THE IDENTIFICATION AND HAPTIC DISPLAY OF FRICTION A DISSERTATION SUBMITTED TO THE DEPARTMENT by Christopher Richard All Rights Reserved #12;iv Abstract Although friction is an important phenomenon and greatly affects the way in which individ- uals interact with the world, friction is all but absent from

  17. Collaborative 3D Visualization on Large Screen Displays

    E-Print Network [OSTI]

    Barbosa, Alberto

    reality (VR) system designed to support collaborative visualization of 3D environments, applied in collaborative work. This paper presents a system that uses remotely located wall sized displays, to offer immersive, interactive collaborative visualization and review of 3D CAD models for engineering applications

  18. Microporous Patterned Electrodes for Color-Matched Electrochromic Polymer Displays

    E-Print Network [OSTI]

    Tanner, David B.

    Microporous Patterned Electrodes for Color-Matched Electrochromic Polymer Displays Pierre of electroactive and conducting polymers offers new opportunities for the design of materials for electrochromic the most promising electrochromic (EC) properties. Here, we report the use of highly porous metallized

  19. THE EFFECT OF FLORAL DISPLAY SIZE ON POLLINATOR VISITATION Introduction

    E-Print Network [OSTI]

    Cavitt, John F.

    . Hence they achieve higher fitness through the female function (= seed production). Another hypothesis is heritable, and pollinator behavior can drive selection for large display size. Rubber Rabbitbrush inflorescences. The flowers are pollinated by a variety of insects. Flower production exceeds seed production

  20. ESSES 2003 2003, Carla Schlatter Ellis Display Management

    E-Print Network [OSTI]

    Ellis, Carla

    1 ESSES 2003© 2003, Carla Schlatter Ellis Display Management: Sensing User Intention and Context (HOTOS 2003) 2ESSES 2003© 2003, Carla Schlatter Ellis Outline · Motivation and Research Objective · Face · Related Work ­ ACPI ­ Dark Windows #12;2 3ESSES 2003© 2003, Carla Schlatter Ellis Motivation · Current