Powered by Deep Web Technologies
Note: This page contains sample records for the topic "flat panel called" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Microgap flat panel display  

DOE Patents (OSTI)

A microgap flat panel display which includes a thin gas-filled display tube that utilizes switched X-Y "pixel" strips to trigger electron avalanches and activate a phosphor at a given location on a display screen. The panel utilizes the principal of electron multiplication in a gas subjected to a high electric field to provide sufficient electron current to activate standard luminescent phosphors located on an anode. The X-Y conductive strips of a few micron widths may for example, be deposited on opposite sides of a thin insulating substrate, or on one side of the adjacent substrates and function as a cathode. The X-Y strips are separated from the anode by a gap filled with a suitable gas. Electrical bias is selectively switched onto X and Y strips to activate a "pixel" in the region where these strips overlap. A small amount of a long-lived radioisotope is used to initiate an electron avalanche in the overlap region when bias is applied. The avalanche travels through the gas filled gap and activates a luminescent phosphor of a selected color. The bias is adjusted to give a proportional electron multiplication to control brightness for given pixel.

Wuest, Craig R. (Danville, CA)

1998-01-01T23:59:59.000Z

2

IBM's New Flat Panel Displays  

NLE Websites -- All DOE Office Websites (Extended Search)

by J. Sthr (SSRL), M. Samant (IBM), J. Lning (SSRL) Today's laptop computers utilize flat panel displays where the light transmission from the back to the front of the display...

3

Flat panel ferroelectric electron emission display system  

DOE Patents (OSTI)

A device is disclosed which can produce a bright, raster scanned or non-raster scanned image from a flat panel. Unlike many flat panel technologies, this device does not require ambient light or auxiliary illumination for viewing the image. Rather, this device relies on electrons emitted from a ferroelectric emitter impinging on a phosphor. This device takes advantage of a new electron emitter technology which emits electrons with significant kinetic energy and beam current density. 6 figs.

Sampayan, S.E.; Orvis, W.J.; Caporaso, G.J.; Wieskamp, T.F.

1996-04-16T23:59:59.000Z

4

Flat panel ferroelectric electron emission display system  

DOE Patents (OSTI)

A device which can produce a bright, raster scanned or non-raster scanned image from a flat panel. Unlike many flat panel technologies, this device does not require ambient light or auxiliary illumination for viewing the image. Rather, this device relies on electrons emitted from a ferroelectric emitter impinging on a phosphor. This device takes advantage of a new electron emitter technology which emits electrons with significant kinetic energy and beam current density.

Sampayan, Stephen E. (Manteca, CA); Orvis, William J. (Livermore, CA); Caporaso, George J. (Livermore, CA); Wieskamp, Ted F. (Livermore, CA)

1996-01-01T23:59:59.000Z

5

Phosphors for flat panel emissive displays  

Science Conference Proceedings (OSTI)

An overview of emissive display technologies is presented. Display types briefly described include: cathode ray tubes (CRTs), field emission displays (FEDs), electroluminescent displays (ELDs), and plasma display panels (PDPs). The critical role of phosphors in further development of the latter three flat panel emissive display technologies is outlined. The need for stable, efficient red, green, and blue phosphors for RGB fall color displays is emphasized.

Anderson, M.T.; Walko, R.J.; Phillips, M.L.F.

1995-07-01T23:59:59.000Z

6

Federal Technical Capability Panel Conference Call Schedule  

NLE Websites -- All DOE Office Websites (Extended Search)

Capability Panel Conference Call Schedule CY 2013 Time: 11:00 an -12:00pm (EST) * 10:00-11:00 am (CST) * 9:00-10:00 am (MST) * 8:00-9:00am (PST) Date Call-In Number June 19, 2013...

7

Flat or curved thin optical display panel  

DOE Patents (OSTI)

An optical panel includes a plurality of waveguides stacked together, with each waveguide having a first end and an opposite second end. The first ends collectively define a first face, and the second ends collectively define a second face of the panel. The second face is disposed at an acute face angle relative to the waveguides to provide a panel which is relatively thin compared to the height of the second face. In an exemplary embodiment for use in a projection TV, the first face is substantially smaller in height than the second face and receives a TV image, with the second face defining a screen for viewing the image enlarged. 7 figures.

Veligdan, J.T.

1995-01-10T23:59:59.000Z

8

Flat or curved thin optical display panel  

DOE Patents (OSTI)

An optical panel 10 includes a plurality of waveguides 12 stacked together, with each waveguide 12 having a first end 12a and an opposite second end 12b. The first ends 12a collectively define a first face 16, and the second ends 12b collectively define a second face 18 of the panel 10. The second face 18 is disposed at an acute face angle relative to the waveguides 12 to provide a panel 10 which is relatively thin compared to the height of the second face. In an exemplary embodiment for use in a projection TV, the first face 16 is substantially smaller in height than the second face 18 and receives a TV image, with the second face 18 defining a screen for viewing the image enlarged.

Veligdan, James T. (Manorville, NY)

1995-01-10T23:59:59.000Z

9

Direct-conversion flat-panel imager with avalanche gain: Feasibility investigation for HARP-AMFPI  

Science Conference Proceedings (OSTI)

The authors are investigating the concept of a direct-conversion flat-panel imager with avalanche gain for low-dose x-ray imaging. It consists of an amorphous selenium (a-Se) photoconductor partitioned into a thick drift region for x-ray-to-charge conversion and a relatively thin region called high-gain avalanche rushing photoconductor (HARP) in which the charge undergoes avalanche multiplication. An active matrix of thin film transistors is used to read out the electronic image. The authors call the proposed imager HARP active matrix flat panel imager (HARP-AMFPI). The key advantages of HARP-AMFPI are its high spatial resolution, owing to the direct-conversion a-Se layer, and its programmable avalanche gain, which can be enabled during low dose fluoroscopy to overcome electronic noise and disabled during high dose radiography to prevent saturation of the detector elements. This article investigates key design considerations for HARP-AMFPI. The effects of electronic noise on the imaging performance of HARP-AMFPI were modeled theoretically and system parameters were optimized for radiography and fluoroscopy. The following imager properties were determined as a function of avalanche gain: (1) the spatial frequency dependent detective quantum efficiency; (2) fill factor; (3) dynamic range and linearity; and (4) gain nonuniformities resulting from electric field strength nonuniformities. The authors results showed that avalanche gains of 5 and 20 enable x-ray quantum noise limited performance throughout the entire exposure range in radiography and fluoroscopy, respectively. It was shown that HARP-AMFPI can provide the required gain while maintaining a 100% effective fill factor and a piecewise dynamic range over five orders of magnitude (10{sup -7}-10{sup -2} R/frame). The authors have also shown that imaging performance is not significantly affected by the following: electric field strength nonuniformities, avalanche noise for x-ray energies above 1 keV and direct interaction of x rays in the gain region. Thus, HARP-AMFPI is a promising flat-panel imager structure that enables high-resolution fully quantum noise limited x-ray imaging over a wide exposure range.

Wronski, M. M.; Rowlands, J. A. [Imaging Research, Sunnybrook Health Sciences Centre, Department of Medical Biophysics, University of Toronto, 2075 Bayview Avenue, Toronto, Ontario M4N 3M5 (Canada)

2008-12-15T23:59:59.000Z

10

A semiempirical linear model of indirect, flat-panel x-ray detectors  

Science Conference Proceedings (OSTI)

Purpose: It is important to understand signal and noise transfer in the indirect, flat-panel x-ray detector when developing and optimizing imaging systems. For optimization where simulating images is necessary, this study introduces a semiempirical model to simulate projection images with user-defined x-ray fluence interaction. Methods: The signal and noise transfer in the indirect, flat-panel x-ray detectors is characterized by statistics consistent with energy-integration of x-ray photons. For an incident x-ray spectrum, x-ray photons are attenuated and absorbed in the x-ray scintillator to produce light photons, which are coupled to photodiodes for signal readout. The signal mean and variance are linearly related to the energy-integrated x-ray spectrum by empirically determined factors. With the known first- and second-order statistics, images can be simulated by incorporating multipixel signal statistics and the modulation transfer function of the imaging system. To estimate the semiempirical input to this model, 500 projection images (using an indirect, flat-panel x-ray detector in the breast CT system) were acquired with 50-100 kilovolt (kV) x-ray spectra filtered with 0.1-mm tin (Sn), 0.2-mm copper (Cu), 1.5-mm aluminum (Al), or 0.05-mm silver (Ag). The signal mean and variance of each detector element and the noise power spectra (NPS) were calculated and incorporated into this model for accuracy. Additionally, the modulation transfer function of the detector system was physically measured and incorporated in the image simulation steps. For validation purposes, simulated and measured projection images of air scans were compared using 40 kV/0.1-mm Sn, 65 kV/0.2-mm Cu, 85 kV/1.5-mm Al, and 95 kV/0.05-mm Ag. Results: The linear relationship between the measured signal statistics and the energy-integrated x-ray spectrum was confirmed and incorporated into the model. The signal mean and variance factors were linearly related to kV for each filter material (r{sup 2} of signal mean to kV: 0.91, 0.93, 0.86, and 0.99 for 0.1-mm Sn, 0.2-mm Cu, 1.5-mm Al, and 0.05-mm Ag, respectively; r{sup 2} of signal variance to kV: 0.99 for all four filters). The comparison of the signal and noise (mean, variance, and NPS) between the simulated and measured air scan images suggested that this model was reasonable in predicting accurate signal statistics of air scan images using absolute percent error. Overall, the model was found to be accurate in estimating signal statistics and spatial correlation between the detector elements of the images acquired with indirect, flat-panel x-ray detectors. Conclusions: The semiempirical linear model of the indirect, flat-panel x-ray detectors was described and validated with images of air scans. The model was found to be a useful tool in understanding the signal and noise transfer within indirect, flat-panel x-ray detector systems.

Huang, Shih-Ying; Yang Kai; Abbey, Craig K.; Boone, John M. [Department of Biomedical Engineering, University of California, Davis, California, One Shields Avenue, Davis, California 95616 (United States) and Department of Radiology, University of California, Davis, Medical Center, 4860 Y Street, Ambulatory Care Center Suite 0505, Sacramento, California 95817 (United States); Department of Radiology, University of California, Davis, Medical Center, 4860 Y Street, Ambulatory Care Center Suite 0505, Sacramento, California 95817 (United States); Department of Psychological and Brain Sciences, University of California, Santa Barbara, California 92106 (United States); Department of Biomedical Engineering, University of California, Davis, California, One Shields Avenue, Davis, California 95616 (United States) and Department of Radiology, University of California, Davis, Medical Center, 4860 Y Street, Ambulatory Care Center Suite 3100, Sacramento, California 95817 (United States)

2012-04-15T23:59:59.000Z

11

Hysterosalpingography using a flat panel unit: Evaluation and optimization of ovarian radiation dose  

Science Conference Proceedings (OSTI)

Purpose: The aim of the present study was the evaluation and optimization of radiation dose to the ovaries (D) in hysterosalpingography (HSG). Methods: The study included a phantom study and a clinical one. In the phantom study, we evaluated imaging results for different geometrical setups and irradiation conditions. In the clinical study, 34 women were assigned into three different fluoroscopy modes and D was estimated with direct cervical TLD measurements. Results: In the phantom study, we used a source-to-image-distance (SID) of 110 cm and a field diagonal of 48 cm, and thus decreased air KERMA rate (KR) by 19% and 70%, respectively, for beam filtration: 4 mm Al and 0.9 mm Cu (Low dose). The least radiation exposure was accomplished by using the 3.75 pps fluoroscopy mode in conjunction with beam filtration: Low dose. In the clinical study, D normalized to 50 s of fluoroscopy time with a 3.75 pps fluoroscopy mode reached a value of 0.45 {+-} 0.04 mGy. Observers' evaluation of diagnostic image quality did not significantly differ for the three different modes of acquisition that were compared. Conclusions: Digital spot radiographs could be omitted in modern flat panel systems during HSG. Fluoroscopy image acquisitions in a modern flat panel unit at 3.75 pps and a beam filtration of 4 mm Al and 0.9 mm Cu demonstrate acceptable image quality with an average D equal to 0.45 mGy. This value is lower compared to the studied literature. For these reasons, the proposed method may be recommended for routine HSG examination in order to limit radiation exposure to the ovaries.

Messaris, Gerasimos A. T.; Abatzis, Ilias; Kagadis, George C.; Samartzis, Alexandros P.; Athanasopoulou, Panagiota; Christeas, Nikolaos; Katsanos, Konstantinos; Karnabatidis, Dimitrios; Nikiforidis, George C. [Department of Medical Physics, University Hospital of Patras, GR 265 04 Rion (Greece); Department of Medical Physics, School of Medicine, University of Patras, GR 265 04 Rion (Greece); Department of Medical Physics, University Hospital of Patras, GR 265 04 Rion, Greece and Department of Medical Physics, School of Medicine, University of Patras, GR 265 04 Rion (Greece); Department of Medical Physics, 'EVANGELISMOS' General Hospital, 45-47 Ypsilantou Street, GR 106 76 Athens (Greece); Philips Hellas, 44 Kifisias Avenue, GR 151 25 Marousi (Greece); Department of Radiology, School of Medicine, University of Patras, GR 265 04 Rion (Greece); Department of Medical Physics, University Hospital of Patras, GR 265 04 Rion, Greece and Department of Medical Physics, School of Medicine, University of Patras, GR 265 04 Rion (Greece)

2012-07-15T23:59:59.000Z

12

Circle plus partial helical scan scheme for a flat panel detector-based cone beam breast X-ray CT  

Science Conference Proceedings (OSTI)

Flat panel detector-based cone beam breast CT (CBBCT) can provide 3D image of the scanned breast with 3D isotropic spatial resolution, overcoming the disadvantage of the structure superimposition associated with X-ray projection mammography. It is very ...

Dong Yang; Ruola Ning; Weixing Cai

2009-01-01T23:59:59.000Z

13

Standard practice for radiologic examination of flat panel composites and sandwich core materials used in aerospace applications  

E-Print Network (OSTI)

1.1 This practice is intended to be used as a supplement to Practices E 1742, E 1255, and E 2033. 1.2 This practice describes procedures for radiologic examination of flat panel composites and sandwich core materials made entirely or in part from fiber-reinforced polymer matrix composites. Radiologic examination is: a) radiographic (RT) with film, b) Computed Radiography (CR) with Imaging Plate, c) Digital Radiology (DR) with Digital Detector Array’s (DDA), and d) Radioscopic (RTR) Real Time Radiology with a detection system such as an Image Intensifier. The composite materials under consideration typically contain continuous high modulus fibers (> 20 GPa), such as those listed in 1.4. 1.3 This practice describes established radiological examination methods that are currently used by industry that have demonstrated utility in quality assurance of flat panel composites and sandwich core materials during product process design and optimization, process control, after manufacture inspection, in service exami...

American Society for Testing and Materials. Philadelphia

2009-01-01T23:59:59.000Z

14

Measurement of joint kinematics using a conventional clinical single-perspective flat-panel radiography system  

SciTech Connect

Purpose: The ability to accurately measure joint kinematics is an important tool in studying both normal joint function and pathologies associated with injury and disease. The purpose of this study is to evaluate the efficacy, accuracy, precision, and clinical safety of measuring 3D joint motion using a conventional flat-panel radiography system prior to its application in an in vivo study. Methods: An automated, image-based tracking algorithm was implemented to measure the three-dimensional pose of a sparse object from a two-dimensional radiographic projection. The algorithm was tested to determine its efficiency and failure rate, defined as the number of image frames where automated tracking failed, or required user intervention. The accuracy and precision of measuring three-dimensional motion were assessed using a robotic controlled, tibiofemoral knee phantom programmed to mimic a subject with a total knee replacement performing a stair ascent activity. Accuracy was assessed by comparing the measurements of the single-plane radiographic tracking technique to those of an optical tracking system, and quantified by the measurement discrepancy between the two systems using the Bland-Altman technique. Precision was assessed through a series of repeated measurements of the tibiofemoral kinematics, and was quantified using the across-trial deviations of the repeated kinematic measurements. The safety of the imaging procedure was assessed by measuring the effective dose of ionizing radiation associated with the x-ray exposures, and analyzing its relative risk to a human subject. Results: The automated tracking algorithm displayed a failure rate of 2% and achieved an average computational throughput of 8 image frames/s. Mean differences between the radiographic and optical measurements for translations and rotations were less than 0.08 mm and 0.07 Degree-Sign in-plane, and 0.24 mm and 0.6 Degree-Sign out-of-plane. The repeatability of kinematics measurements performed using the radiographic tracking technique was better than {+-}0.09 mm and 0.12 Degree-Sign in-plane, and {+-}0.70 mm and {+-}0.07 Degree-Sign out-of-plane. The effective dose associated with the imaging protocol used was 15 {mu}Sv for 10 s of radiographic cine acquisition. Conclusions: This study demonstrates the ability to accurately measure knee-joint kinematics using a single-plane radiographic measurement technique. The measurement technique can be easily implemented at most clinical centers equipped with a modern-day radiographic x-ray system. The dose of ionizing radiation associated with the image acquisition represents a minimal risk to any subjects undergoing the examination.

Seslija, Petar; Teeter, Matthew G.; Yuan Xunhua; Naudie, Douglas D. R.; Bourne, Robert B.; MacDonald, Steven J.; Peters, Terry M.; Holdsworth, David W. [Biomedical Engineering Graduate Program, University of Western Ontario, London, Ontario N6A 5B9 (Canada) and Imaging Research Laboratories, Robarts Research Institute, London, Ontario N6A 5K8 (Canada); Department of Medical Biophysics, University of Western Ontario, London, Ontario N6A 5C1 (Canada) and Imaging Research Laboratories, Robarts Research Institute, London, Ontario N6A 5K8 (Canada); Imaging Research Laboratories, Robarts Research Institute, London, Ontario N6A 5K8 (Canada) and Division of Orthopaedic Surgery, University of Western Ontario and London Health Sciences Centre, London, Ontario N6A 4L6 (Canada); Division of Orthopaedic Surgery, University of Western Ontario and London Health Sciences Centre, London, Ontario N6A 4L6 (Canada); Biomedical Engineering Graduate Program, University of Western Ontario, London, Ontario N6A 5B9 (Canada); Department of Medical Biophysics, University of Western Ontario, London, Ontario N6A 5C1 (Canada) and Imaging Research Laboratories, Robarts Research Institute, London, Ontario N6A 5K8 (Canada)

2012-10-15T23:59:59.000Z

15

Precise Application of Transparent Conductive Oxide Coatings for Flat Panel Displays and Photovoltaic Cells  

Argonne has developed a new method for applying thin film coatings of transparent conducting oxides (TCOs) to large panel displays and photovoltaic (PV) cells.

16

Radiation dose reduction using a CdZnTe-based computed tomography system: Comparison to flat-panel detectors  

Science Conference Proceedings (OSTI)

Purpose: Although x-ray projection mammography has been very effective in early detection of breast cancer, its utility is reduced in the detection of small lesions that are occult or in dense breasts. One drawback is that the inherent superposition of parenchymal structures makes visualization of small lesions difficult. Breast computed tomography using flat-panel detectors has been developed to address this limitation by producing three-dimensional data while at the same time providing more comfort to the patients by eliminating breast compression. Flat panels are charge integrating detectors and therefore lack energy resolution capability. Recent advances in solid state semiconductor x-ray detector materials and associated electronics allow the investigation of x-ray imaging systems that use a photon counting and energy discriminating detector, which is the subject of this article. Methods: A small field-of-view computed tomography (CT) system that uses CdZnTe (CZT) photon counting detector was compared to one that uses a flat-panel detector for different imaging tasks in breast imaging. The benefits afforded by the CZT detector in the energy weighting modes were investigated. Two types of energy weighting methods were studied: Projection based and image based. Simulation and phantom studies were performed with a 2.5 cm polymethyl methacrylate (PMMA) cylinder filled with iodine and calcium contrast objects. Simulation was also performed on a 10 cm breast specimen. Results: The contrast-to-noise ratio improvements as compared to flat-panel detectors were 1.30 and 1.28 (projection based) and 1.35 and 1.25 (image based) for iodine over PMMA and hydroxylapatite over PMMA, respectively. Corresponding simulation values were 1.81 and 1.48 (projection based) and 1.85 and 1.48 (image based). Dose reductions using the CZT detector were 52.05% and 49.45% for iodine and hydroxyapatite imaging, respectively. Image-based weighting was also found to have the least beam hardening effect. Conclusions: The results showed that a CT system using an energy resolving detector reduces the dose to the patient while maintaining image quality for various breast imaging tasks.

Le, Huy Q.; Ducote, Justin L.; Molloi, Sabee [Department of Radiological Sciences, University of California, Irvine, California 92697 (United States)

2010-03-15T23:59:59.000Z

17

Modeling, Designing, Fabricating, and Testing of Channel Panel Flat Plate Heat Pipes.  

E-Print Network (OSTI)

??Flat plate heat pipes are very efficient passive two-phase heat transport devices. Their high e'ciency and low mass are desirable in the aerospace and electronics… (more)

Harris, James R

2008-01-01T23:59:59.000Z

18

The ImmersaDesk3 -Experiences With A Flat Panel Display for Virtual Reality  

E-Print Network (OSTI)

crystal, #12;ferro-electric liquid crystal, plasma panel, and light emitting diode displays. In our, they are presently only available in developer kits. Light Emitting Diode displays are bright and potentially

Johnson, Andrew

19

Development of surfaces optically suitable for flat solar panels. Final report  

DOE Green Energy (OSTI)

This final report contains three principal items. The first describes a simple and novel reflectometer which can separately evaluate the spectral and diffuse reflectivities of surfaces. A phase locked detection system for the reflectometer is also described. The second item is a selective coating on aluminium potentially useful for flat-plate solar collector applications. The coating is composed of strongly bound copper oxide (divalent) and is formed by an etching process performed on an aluminium alloy with high copper content. Because of this one step fabrication process, fabrication costs are expected to be small. Process parameters, however, need further definition. The third item contains conclusions gleaned from the literature as to the required optical properties of flat plate solar collectors.

Not Available

1979-08-01T23:59:59.000Z

20

ICFA Panels  

NLE Websites -- All DOE Office Websites (Extended Search)

Panels ICFA Instrumentation Innovation and Development Panel ICFA Beam Dynamics Panel ICFA Panel on Advanced and Novel Accelerators ICFA Standing Committee on Interregional...

Note: This page contains sample records for the topic "flat panel called" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Building Energy Software Tools Directory: Panel Shading  

NLE Websites -- All DOE Office Websites (Extended Search)

Panel Shading Panel Shading lets you optimize the geometry of rows of flat-plate solar collectors (PV or solar thermal) by visualizing on an annual basis how much the rows shade...

22

Universal solar concentrator panel  

SciTech Connect

This patent describes a solar concentrator device. It comprises: a solar energy receiver; and a flat solar energy reflector arranged to reflect solar energy to the receiver, the reflector including a substantially square-shaped frame limiting an inner space, individual flat reflective panels arranged in the space in a first group or rows extending in a first direction and a second group of rows extending in a second direction substantially transverse to the first direction and so that each of the panels is turnable about three mutually perpendicular axes, and means for mounting the panels so that they are turnable about the axes. The mounting means including first means which connect the panels in the rows extending in one of the directions so that the panels in each of the rows extending in the one direction are jointly turnable about a first one of the axes, second means for mounting each of the panels so that in each of the rows extending in the one direction each of the panels is turnable about a second one of the axes, and third means for mounting each panel in each of the rows extending in the one direction so that each of the panels is turnable about a third one of the axes. This patent also describes a solar concentrator device, wherein the receiver includes a box forming an inner chamber, a plurality of photovoltaic cells sealed with a clear plastic and accommodated in the chamber, and water filling the chamber and surrounding the photovoltaic cells.

Bagno, R.G.

1991-03-12T23:59:59.000Z

23

CALL FOR ABSTRACTS  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CALL FOR ABSTRACTS CALL FOR ABSTRACTS For the 2014 National Environmental Justice Conference and Training Program (Due to the recent Federal Government Shutdown, the dates for the submission and acceptance of Abstracts have been extended as set forth below) The 2014 National Environmental Justice Conference and Training Program planners are inviting individuals to submit abstracts, not to exceed two pages, related to environmental justice. Each abstract should include the submitter's name, affiliation and full contact information. The overall conference theme is Enhancing Communities Through Capacity Building and Technical Assistance. The subtheme for the 2014 conference is: Environmental Justice: The Next Twenty Years. The conference planners are interested in panel presentations,

24

Solar collector panels (process-method). Rainwater collection and storage  

DOE Green Energy (OSTI)

A process for producing panels for solar heating of potable water is described. The panels have PVC tubing flat-coiled into square or rectangular shapes. Also described is a cistern for collecting and storing rainwater. (LEW)

Mowery, J.W.

1981-10-15T23:59:59.000Z

25

Flat-Plate Photovoltaic Systems  

Energy.gov (U.S. Department of Energy (DOE))

The most common photovoltaic (PV) array design uses flat-plate PV modules or panels. These panels can be fixed in place or allowed to track the movement of the sun. They respond to sunlight that is direct or diffuse. Even in clear skies, the diffuse component of sunlight accounts for between 10% and 20% of the total solar radiation on a horizontal surface. On partly sunny days, up to 50% of that radiation is diffuse, and on cloudy days, 100% of the radiation is diffuse.

26

20-kW solar photovoltaic flat-panel power system for an uninterruptible power-system load in El Paso, Texas. Phase II. System fabrication. Final report October 1, 1979-May 31, 1981  

DOE Green Energy (OSTI)

The system plans, construction, integration and test, and performance evaluation are discussed for the photovoltaic power supply at the Newman Power Station in El Paso, Texas. The system consists of 64 parallel-connected panels, each panel containing nine series-connected photovoltaic modules. The system is connected, through power monitoring equipment, to an existing DC bus that supplies uninterruptible power to a computer that controls the power generating equipment. The site is described and possible environmental hazards are assessed. Site preparation and the installation of the photovoltaic panels, electrical cabling, and instrumentation subsystems are described. System testing includes initial system checkout, module performance test, control system test. A training program for operators and maintenance personnel is briefly described, including visual aids. Performance data collection and analysis are described, and actual data are compared with a computer simulation. System drawings are included. (LEW)

Risser, V.V.

1981-12-01T23:59:59.000Z

27

Venice Sustainability Advisory Panel  

E-Print Network (OSTI)

Venice Sustainability Advisory PanelFINAL REPORT Venice Sustainability Advisory Panel FinalInvestigator The Venice Sustainability Advisory Panel (

2009-01-01T23:59:59.000Z

28

Panel Session  

NLE Websites -- All DOE Office Websites (Extended Search)

Overview IGTI ASME Turbo Expo Montreal, Canada, May 14-17, 2007 Panel Presentation Tuesday, May 15, 2007 @ 2:30 - 5:00 PM CO2 Compression Opportunities in Fossil Fueled Power...

29

Flat-Plate Photovoltaic System Basics | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Flat-Plate Photovoltaic System Basics Flat-Plate Photovoltaic System Basics Flat-Plate Photovoltaic System Basics August 20, 2013 - 4:03pm Addthis The most common photovoltaic (PV) array design uses flat-plate PV modules or panels. These panels can be fixed in place or allowed to track the movement of the Illustration of a cutaway of a typical flat-plate module. The layers, in order from top to bottom, are: cover film, solar cell, encapsulant, substrate, cover film, seal, gasket, and frame. One typical flat-plate module design uses a substrate of metal, glass, or plastic to provide structural support in the back; an encapsulant material to protect the cells; and a transparent cover of plastic or glass. sun. They respond to sunlight that is direct or diffuse. Even in clear skies, the diffuse component of sunlight accounts for between 10% and 20%

30

Flat | Open Energy Information  

Open Energy Info (EERE)

Flat Flat Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Print PDF Flat Dictionary.png Flat: A relatively smooth landscape with no topographic relief Other definitions:Wikipedia Reegle Topographic Features List of topographic features commonly encountered in geothermal resource areas: Mountainous Horst and Graben Shield Volcano Flat Lava Dome Stratovolcano Cinder Cone Caldera Depression Resurgent Dome Complex The North Brawley Geothermal Power Plant is located in the Imperial Valley, California, a broad valley with flat topographic features. http://www.pcl.com/Projects-that-Inspire/Pages/North-Brawley-Geothermal-Power-Plant.aspx# Flat terrains are characterized by the absence of major topographic features. Flat topography is typically encountered in areas that have

31

Solar panel  

SciTech Connect

A solar panel is shown for use as a double panel window structure. It has an outer frame formed by an H-shaped extrusion that has one of its outermost legs shortened, and a pair of generally parallel legs or flanges that are inwardly directed of the frame. The outer surface of these flanges are furnished with a dual pressure-sensitive adhesive tape having a width between 1/4 inch and 1 inch. A pane of transparent material is sealed around its periphery into engagement with the adhesive tape for forming a double pane solar panel. Several modifications are also shown for exerting a mechanical locking force on at least one of the panes.

Sitzler, E.R.; Moore, F.W.

1984-06-19T23:59:59.000Z

32

Participate on an Expert Panel  

Science Conference Proceedings (OSTI)

AOCS Lab Services - Participate on an Expert Panel. Participate on an Expert Panel Participate on an Expert Panel Expert Panels

33

Diesel prices flat  

U.S. Energy Information Administration (EIA) Indexed Site

Diesel prices flat The U.S. average retail price for on-highway diesel fuel saw no movement from last week. Prices remained flat at 3.89 a gallon on Monday, based on the weekly...

34

Interconnection Panel  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Interconnection Panel Dan Tunnicliff, P.E. Manager, Government Segment, Southern California Edison Southern California Edison Application Processing Technical Scoping Meeting Technical Studies Interconnection Agreement Project Implementation Overview of Generation Interconnection Process (GIP) * Transmission Level Interconnections - Governed by CAISO Tariff. * Generally for 220 kV and higher. * All applications must be submitted to the CAISO. * CAISO administers its tariff, which is approved by FERC. * Distribution Level Interconnections - Governed by SCE's WDAT. * Generally below 220 kV. * All applications must be submitted to SCE. * SCE administers its tariff, which is approved by FERC. 2 Southern California Edison Interconnection agreements are critically

35

Rocky Flats Site Expands Solar Power for Treating Groundwater | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Rocky Flats Site Expands Solar Power for Treating Groundwater Rocky Flats Site Expands Solar Power for Treating Groundwater Rocky Flats Site Expands Solar Power for Treating Groundwater April 17, 2013 - 1:26pm Addthis Subcontractor personnel install solar panels and other infrastructure on a 40-foot conex box that houses the batteries and control equipment for the 6 kilowatt photovoltaic system that powers the ETPTS groundwater treatment system. Subcontractor personnel install solar panels and other infrastructure on a 40-foot conex box that houses the batteries and control equipment for the 6 kilowatt photovoltaic system that powers the ETPTS groundwater treatment system. DOE was able to minimize impacts to the habitat of a federally protected mouse and provide the potential for relatively easy relocation by mounting the solar panels on the side of the conex box that houses the batteries and other system equipment.

36

Rocky Flats Site Expands Solar Power for Treating Groundwater | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Rocky Flats Site Expands Solar Power for Treating Groundwater Rocky Flats Site Expands Solar Power for Treating Groundwater Rocky Flats Site Expands Solar Power for Treating Groundwater April 17, 2013 - 1:26pm Addthis Subcontractor personnel install solar panels and other infrastructure on a 40-foot conex box that houses the batteries and control equipment for the 6 kilowatt photovoltaic system that powers the ETPTS groundwater treatment system. Subcontractor personnel install solar panels and other infrastructure on a 40-foot conex box that houses the batteries and control equipment for the 6 kilowatt photovoltaic system that powers the ETPTS groundwater treatment system. DOE was able to minimize impacts to the habitat of a federally protected mouse and provide the potential for relatively easy relocation by mounting the solar panels on the side of the conex box that houses the batteries and other system equipment.

37

Combined-load buckling behavior of metal-matrix composite sandwich panels under different thermal environments  

Science Conference Proceedings (OSTI)

Combined compressive and shear buckling analysis was conducted on flat rectangular sandwich panels with the consideration of transverse shear effects of the core. The sandwich panel is fabricated with titanium honeycomb core and laminated metal matrix composite face sheets. The results show that the square panel has the highest combined load buckling strength, and that the buckling strength decreases sharply with the increases of both temperature and panel aspect ratio. The effect of layup (fiber orientation) on the buckling strength of the panels was studied in detail. The metal matrix composite sandwich panel was much more efficient than the sandwich panel with nonreinforced face sheets and had the same specific weight.

Ko, W.L.; Jackson, R.H.

1991-09-01T23:59:59.000Z

38

Panels for collecting solar energy  

Science Conference Proceedings (OSTI)

A solar energy collecting panel is described for heating by solar radiation a liquid circulating in a section of piping and constituted by a flat rectangular box thermally closed by a cover transparent to solar radiation and containing the said section of piping. The said box is constituted by a stamped metal sheet whose surface is less than 1 M squared and also contains a stamped copper tray in intimate contact with the piping section, the said tray supporting by itself the transparent cover and being thermally spaced from the box, the insulating pad being constituted by a in situ moulded block of rigid foam. Such a panel is intended to be used for feeding a central heating system and/or a hot water distribution system, especially for household purposes or swimming pools.

Neny, M.

1980-11-18T23:59:59.000Z

39

Call for Papers and Panels Unleashing the Black Erotic  

E-Print Network (OSTI)

and the Hypersexuality of Black Women Alternative Modes of Black Love and Family The Politics and Economics of Porn

Kunkle, Tom

40

A FISH called WANDA  

Science Conference Proceedings (OSTI)

... 1 A FISH called WANDA, 2013 A FISH called WANDA WANDA: A Measurement Tool for ... Stefan Giesler, Freiburg, Germany FISH-new: ...

2013-06-05T23:59:59.000Z

Note: This page contains sample records for the topic "flat panel called" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Rocky flats teams forming  

SciTech Connect

Bidding teams are shaping up to go after the $3.5-billion, five-year contract to manage ongoing operations and cleanup of the US Dept. of Energy`s Rocky Flats nuclear weapon plant near Denver.

NONE

1994-08-01T23:59:59.000Z

42

Diesel prices flat nationally  

U.S. Energy Information Administration (EIA) Indexed Site

Diesel prices flat nationally The U.S. average retail price for on-highway diesel fuel remained the same from a week ago at 3.98 a gallon on Monday, based on the weekly price...

43

Flat plate solar oven  

Science Conference Proceedings (OSTI)

The construction of an Indian Rs. 186 (US $20.33) flat-plate solar oven is described. Detailed drawings are provided and relevant information on cooking times and temperature for different foods is given.

Parikh, M.

1981-01-01T23:59:59.000Z

44

Proposal Review Panel Descriptions  

NLE Websites -- All DOE Office Websites (Extended Search)

Proposal Review Panel Descriptions Proposal Review Panel Descriptions To ensure competent scientific review, a proposal may be assigned to a different panel (at the discretion of the Review Panel Chair), or the panel may seek additional ad hoc reviews from other experts. High-Pressure This panel reviews scattering and diffraction proposals that focus on materials at high pressure. Techniques such as (but not limited to) diffraction, nuclear resonant scattering, and inelastic x-ray scattering for materials at high pressure are appropriate for this panel to consider. Instrumentation This panel reviews proposals related to the development of beamline instrumentation, sample environments, x-ray optical components, and/or detectors that are relevant to synchrotron radiation research. This panel

45

Design and analysis of a concrete modular housing system constructed with 3D panels  

E-Print Network (OSTI)

An innovative modular house system design utilizing an alternative concrete residential building system called 3D panels is presented along with an overview of 3D panels as well as relevant methods and markets. The proposed ...

Sarcia, Sam Rhea, 1982-

2004-01-01T23:59:59.000Z

46

Cleanup at Rocky Flats  

NLE Websites -- All DOE Office Websites (Extended Search)

David L. Clark, Los Alamos National Laboratory David L. Clark, Los Alamos National Laboratory The Rocky Flats Environmental Technology Site (RFETS) is an environmental cleanup site located about 16 miles northwest of downtown Denver (Fig 1). Two decades of routine monitoring have shown that the environment around RFETS is contaminated with actinide elements (U, Pu, Am) from site operations, [1] and RFETS has been designated by the U.S. Environmental Protection Agency (EPA) as a Superfund cleanup site. Until December 1989, the Rocky Flats Plant made components for nuclear weapons using various radioactive and hazardous materials, including plutonium, uranium and beryllium. Nearly 40 years of nuclear weapons production left behind a legacy of contaminated facilities, soils, and ground water. More than 2.5 million people live within a 50 mile radius of the site; 300,000 of those live in the Rocky Flats watershed.

47

CALL FOR PAPERS  

Science Conference Proceedings (OSTI)

August 19-22, 2007. University of Michigan. Ann Arbor, Michigan USA. CALL FOR PAPERS. Abstract Deadline: October 2, 2006. Sponsored by. Hosted by.

48

Is flat fair?  

Science Conference Proceedings (OSTI)

Dynamic pricing holds out the promise of shifting peak demand as well as reducing overall demand. But it also raises thorny issues of fairness. All practical pricing systems involve tradeoffs between equity and efficiency. I examine the circumstances under which equity ought to be allowed to trump efficiency and whether or not this constitutes a defense of flat pricing. (author)

Bunzl, Martin

2010-07-15T23:59:59.000Z

49

Interactive optical panel  

DOE Patents (OSTI)

An interactive optical panel assembly 34 includes an optical panel 10 having a plurality of ribbon optical waveguides 12 stacked together with opposite ends thereof defining panel first and second faces 16, 18. A light source 20 provides an image beam 22 to the panel first face 16 for being channeled through the waveguides 12 and emitted from the panel second face 18 in the form of a viewable light image 24a. A remote device 38 produces a response beam 40 over a discrete selection area 36 of the panel second face 18 for being channeled through at least one of the waveguides 12 toward the panel first face 16. A light sensor 42,50 is disposed across a plurality of the waveguides 12 for detecting the response beam 40 therein for providing interactive capability.

Veligdan, James T. (Manorville, NY)

1995-10-03T23:59:59.000Z

50

Proposal Review Panel | Stanford Synchrotron Radiation Lightsource  

NLE Websites -- All DOE Office Websites (Extended Search)

Proposal Review Panel Proposal Review Panel Submitting a proposal is the first step to access beam time at SSRL. Proposals are peer reviewed and rated by the SSRL Proposal Review Panel (PRP) on a scale from 1 (highest) to 5 (lowest). Successful proposals are eligble to request and may be awarded beam time on SSRL beam lines, with priority given to the highest rated proposals and those which demonstrate efficient and productive use of beam time. We have three proposal calls per year with one on-site PRP meeting at SSRL annually. Access Policy The work of the PRP is accomplished with four subpanels: BIO - The biology panel reviews proposals requesting beam time for imaging, X-ray spectroscopic studies, small-angle scattering experiments, and crystallography of biologically important samples.

51

Terrestrial applications of bifacial photovoltaic solar panels  

Science Conference Proceedings (OSTI)

Bifacial Photovoltaic solar cells (so-called transparent bifacial photovoltaic solar cells) offer additional absorption by rear side, which is a significant advantage over ordinary Photovoltaic solar cells. A range of experiments have been done on bifacial ... Keywords: absorption, panels, photovoltaic, solar cells, terrestrial

P. Ooshaksaraei; R. Zulkifli; S. H. Zaidi; M. Alghoul; A. Zaharim; K. Sopian

2011-10-01T23:59:59.000Z

52

Flat plate heat exchangers  

SciTech Connect

A lightweight flat plate heat exchanger comprised of two or more essentially parallel flat plates which are formed and arranged to provide fluid flow passages between the plates. New combinations of plastic plates include the usage of transparent plastic foam and honeycomb structures. Improved shapes of flow passages include the usage of flow nozzles, flow diffusers, and jet pumps to increase fluid flow and heat transfer. The invention includes the usage of transparent plastic foam plates which are shaped to concentrate solar energy onto plastic tubes. Clear plastic tubes containing black heat transfer fluid are included. The invention includes the usage of spiral flow channels within plastic foam plates. Six different embodiments of the invention are included. Five of the embodiments could be used as efficient lightweight solar collectors.

Berringer, R.T.

1981-09-29T23:59:59.000Z

53

Technical Review Panel Report  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

TRP Report v7, 12 Aug 2012 TRP Report Final December 2012 TRP Report v7, 12 Aug 2012 TRP Report Final December 2012 Advanced Reactor Concepts Technical Review Panel Report Evaluation and Identification of future R&D on eight Advanced Reactor Concepts, conducted April - September 2012 December 2012 Public release version 2 Public release version 3 Table of Contents Summary ................................................................................................................................... 4 1. Overview of the Technical Review Panel Process ............................................................... 5 2. Technical Review Panel Criteria ......................................................................................... 6 3. Concept Summaries ........................................................................................................... 8

54

Solar reflection panels  

DOE Patents (OSTI)

A solar collector comprising a glass mirror, and a composite panel, wherein the back of the mirror is affixed to a front surface of the composite panel. The composite panel comprises a front sheet affixed to a surface of a core material, preferably a core material comprising a honeycomb structure, and a back sheet affixed to an opposite surface of the core material. The invention may further comprise a sealing strip, preferably comprising EPDM, positioned between the glass mirror and the front surface of the composite panel. The invention also is of methods of making such solar collectors.

Diver, Jr., Richard B. (Albuquerque, NM); Grossman, James W. (Albuquerque, NM); Reshetnik, Michael (Boulder, CO)

2006-07-18T23:59:59.000Z

55

Manufacturing's Wake-Up Call  

Science Conference Proceedings (OSTI)

... and the business environment (the floor) and the mix of available resources (the roof). ... attempt to build efficiency and eliminate waste fell flat at first. ...

56

Flexible optical panel  

DOE Patents (OSTI)

A flexible optical panel includes laminated optical waveguides, each including a ribbon core laminated between cladding, with the core being resilient in the plane of the core for elastically accommodating differential movement thereof to permit winding of the panel in a coil.

Veligdan, James T. (Manorville, NY)

2001-01-01T23:59:59.000Z

57

Reinventing the solar panel  

SciTech Connect

This article discusses new technology in solar panels. PowerSource is a solar collector which not only is less expensive than conventional panels to purchase and install, but also increases the electrical output by almost 20%. This article describes the results of testing this system.

Scanlon, M.

1995-08-01T23:59:59.000Z

58

CALL FOR ABSTRACTS  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CALL FOR ABSTRACTS CALL FOR ABSTRACTS For the 2013 National Environmental Justice Conference and Training Program The 2013 National Environmental Justice Conference and Training Program planners are inviting individuals to submit abstracts of no less than 1 page and no more than 2 pages related to environmental justice. The conference will focus on Enhancing Communities Through Capacity Building and Technical Assistance. However, all environmental justice related abstracts will be considered. Individuals selected to present or moderate will serve on a voluntary basis. All moderators and presenters MUST register for the conference. Since the registration is free for most participants, conference travel expenses and hotel accommodations will be at the participant's expense. Each abstract should include the submitter's

59

Enforcement Letter - Rocky Flats  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1, 2000 1, 2000 Mr. Robert G. Card [ ] Kaiser-Hill Company, L.L.C Rocky Flats Environmental Technology Site 10808 Highway 93, Unit B Golden, CO 80403-8200 Subject: Enforcement Letter Dear Mr. Card: This letter refers to an evaluation by the Department of Energy (DOE) of noncompliance report number NTS-RFO--KHLL-SITEWIDE-2000-0005, which describes noncompliances with the design and procurement requirements of 10 CFR 830.120 (Quality Assurance Rule). 10 CFR 830.120(c)(2)(iii) requires that procured items and services shall meet established requirements and perform as required; 10 CFR 830.120(c)(2)(ii) requires that design work including changes, shall incorporate applicable requirements and design bases; 10 CFR 830.120(c)(2)(iv) requires that inspection and testing of specified items, services, and processes shall be conducted

60

NSLS Committees | Proposal Oversight Panel  

NLE Websites -- All DOE Office Websites (Extended Search)

Proposal Oversight Panel Charge Assume responsibility for completing any missing third reviews of the regular Proposal Review Panels. Review proposals with large rating...

Note: This page contains sample records for the topic "flat panel called" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Flat-Plate Photovoltaic Modules  

Energy.gov (U.S. Department of Energy (DOE))

Flat-plate photovoltaic (PV) modules are made of several components, including the front surface materials, encapsulant, rear surface, and frame.

62

Gas filled panel insulation  

DOE Patents (OSTI)

A structural or flexible highly insulative panel which may be translucent, is formed from multi-layer polymeric material in the form of an envelope surrounding a baffle. The baffle is designed so as to minimize heat transfer across the panel, by using material which forms substantially closed spaces to suppress convection of the low conductivity gas fill. At least a portion of the baffle carries a low emissivity surface for suppression of infrared radiation. 18 figures.

Griffith, B.T.; Arasteh, D.K.; Selkowitz, S.E.

1993-12-14T23:59:59.000Z

63

Hexagon solar power panel  

SciTech Connect

A solar energy panel comprises a support upon which silicon cells are arrayed. The cells are wafer thin and of two geometrical types, both of the same area and electrical rating, namely hexagon cells and hourglass cells. The hourglass cells are composites of half hexagons. A near perfect nesting relationship of the cells achieves a high density packing whereby optimum energy production per panel area is achieved.

Rubin, Irwin (Oxnard, CA)

1978-01-01T23:59:59.000Z

64

Gas filled panel insulation  

DOE Patents (OSTI)

A structural or flexible highly insulative panel which may be translucent, is formed from multi-layer polymeric material in the form of an envelope surrounding a baffle. The baffle is designed so as to minimize heat transfer across the panel, by using material which forms substantially closed spaces to suppress convection of the low conductivity gas fill. At least a portion of the baffle carries a low emissivity surface for suppression of infrared radiation.

Griffith, Brent T. (Berkeley, CA); Arasteh, Dariush K. (Oakland, CA); Selkowitz, Stephen E. (Piedmont, CA)

1993-01-01T23:59:59.000Z

65

Oven wall panel construction  

DOE Patents (OSTI)

An oven roof or wall is formed from modular panels, each of which comprises an inner fabric and an outer fabric. Each such fabric is formed with an angle iron framework and somewhat resilient tie-bars or welded at their ends to flanges of the angle irons to maintain the inner and outer frameworks in spaced disposition while minimizing heat transfer by conduction and permitting some degree of relative movement on expansion and contraction of the module components. Suitable thermal insulation is provided within the module. Panels or skins are secured to the fabric frameworks and each such skin is secured to a framework and projects laterally so as slidingly to overlie the adjacent frame member of an adjacent panel in turn to permit relative movement during expansion and contraction.

Ellison, Kenneth (20 Avondale Cres., Markham, CA); Whike, Alan S. (R.R. #1, Caledon East, both of Ontario, CA)

1980-04-22T23:59:59.000Z

66

Solar panel with storage  

SciTech Connect

A self contained, fully automatic, vertical wall panel, solar energy system characterized by having no moving parts in the panel. The panel is substantially a shallow rectangular box having a closed perimeter, an outer insulating chamber which is substantially a double glazed window, and an inner energy storage chamber which is provided with containers of phase change materials. The energy storage chamber is provided with air entrance and exit passages which communicate with the space to be heated. Thermostatically controlled blowers serve to move air from the space to be heated across the containers of phase change material and back to the space to be heated. Thermostatically controlled blowers also serve to move insulating material into and out of the insulating chamber at appropriate times.

Zilisch, K.P.

1984-05-08T23:59:59.000Z

67

SSRL- Proposal Review Panel  

NLE Websites -- All DOE Office Websites (Extended Search)

Stanford Synchrotron Radiation Lab Stanford Synchrotron Radiation Lab search Go [an error occurred while processing this directive] Proposal Review Panel Sub Panels Structural Molecular Biology & Biophysics Materials 1: Structure, Reactivity & Self-Assembly Materials 2: Electronic Properties, Magnetic Properties & Surface Science Molecular Environmental & Interface Science Membership Torgny Gustafsson Rutgers University Dept of Physics & Astronomy 136 Frelinghuysen Rd Piscataway NJ 08854-0849 Victor Henrich Yale University Dept of Applied Physics 327 Becton Center, 15 Prospect St. New Haven CT 06511 Christopher P. Hill University of Utah Biochemistry 15 N. Medical Dr. East, Rm 4100 Salt Lake City, UT 84112-5650 Franz Himpsel University of Wisconsin Dept of Physics 1150 University Avenue

68

2009 Smart Distribution Panel  

Science Conference Proceedings (OSTI)

The smart distribution panel (SDP) is an integrated demand management system, designed to manage demand by automatically switching user-prioritized branch circuits, either off the grid or to a secondary power source. In 2008, EPRI tested the performance of an IEC (European) compliant modelresults can be found in EPRI report 1016079. After the 2008 test, the SDP received UL 50 and UL 67 approvals for a new 240/120V 250A panel designed for the North American market. In 2009, EPRI tested the UL certified pa...

2009-12-11T23:59:59.000Z

69

Windy Flats | Open Energy Information  

Open Energy Info (EERE)

Flats Flats Jump to: navigation, search Name Windy Flats Facility Windy Flats Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner Cannon Power Group Developer Cannon Power Group Location North shore of Columbia River Coordinates 45.699622°, -120.774622° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":45.699622,"lon":-120.774622,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

70

Interacting agegraphic dark energy models in non-flat universe  

E-Print Network (OSTI)

A so-called "agegraphic dark energy" was recently proposed to explain the dark energy-dominated universe. In this Letter, we generalize the agegraphic dark energy models to the universe with spatial curvature in the presence of interaction between dark matter and dark energy. We show that these models can accommodate $w_D = -1 $ crossing for the equation of state of dark energy. In the limiting case of a flat universe, i.e. $k = 0$, all previous results of agegraphic dark energy in flat universe are restored.

Ahmad Sheykhi

2009-07-29T23:59:59.000Z

71

Revegetation of the Rocky Flats Site | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Revegetation of the Rocky Flats Site Revegetation of the Rocky Flats Site Revegetation of the Rocky Flats, Colorado Site Revegetation of the Rocky Flats Site More Documents &...

72

Solar Panels Plus LLC | Open Energy Information  

Open Energy Info (EERE)

Panels Plus LLC Jump to: navigation, search Name Solar Panels Plus LLC Place Chesapeake, Virginia Zip 23320 Sector Solar Product Solar Panels Plus LLC distributes solar energy...

73

When Callings Are Calling: Crafting Work and Leisure in Pursuit of Unanswered Occupational Callings  

Science Conference Proceedings (OSTI)

Scholars have identified benefits of viewing work as a calling, but little research has explored the notion that people are frequently unable to work in occupations that answer their callings. To develop propositions on how individuals experience and ... Keywords: calling, job crafting, psychological well-being, regulatory focus, self-regulation, work orientation

Justin M. Berg; Adam M. Grant; Victoria Johnson

2010-09-01T23:59:59.000Z

74

Lighting Technology Panel  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technology Panel Technology Panel Federal Utility Partnership Working Group N b 2009 November 1 1 8, 2009 Doug Avery Southern California Edison Southern California Edison National Energy Conservation M d t Mandates * There are Federal and State Mandates to reduce energy consumption - California Investor Owned Electric Utilities are ordered to save around 3 Billion kWh's each y year from 2007-2113 - Federal buildings ordered to reduce electrical Federal buildings ordered to reduce electrical energy consumption 35% by 2012 Energy Consump ption gy Lighting accounts for 42 7% of energy consumption Lighting accounts for 42.7% of energy consumption Data Courtesy of SDG&E Data Courtesy of SDG&E Energy Consump ption gy More than ¾ of the lighting load is non-residential. Data Courtesy of SDG&E

75

Call for Papers Postcard - TMS  

Science Conference Proceedings (OSTI)

ALL FOR PAPERS! March 3-7, 2013 ... Materials and Society: Energy Technology, Policy, and Education. • Materials ... 2013 Annual Meeting Call for Papers!

76

Integrated thermal treatment systems study. Internal review panel report  

SciTech Connect

The U.S. Department of Energy (DOE) Office of Technology Development (OTD) commissioned two studies to evaluate nineteen thermal treatment technologies for treatment of DOE mixed low-level waste. These studies were called the Integrated Thermal Treatment System (ITTS) Phase I and Phase II. With the help of the DOE Office of Environmental Management (EM) Mixed Waste Focus Group, OTD formed an ITTS Internal Review Panel to review and comment on the ITTS studies. This Panel was composed of scientists and engineers from throughout the DOE complex, the U.S. Environmental Protection Agency, the California EPA, and private experts. The Panel met from November 15-18, 1994 to review the ITTS studies and to make recommendations on the most promising thermal treatment systems for DOE mixed low-level wastes and on research and development necessary to prove the performance of the technologies. This report describes the findings and presents the recommendations of the Panel.

Cudahy, J.; Escarda, T.; Gimpel, R. [and others

1995-04-01T23:59:59.000Z

77

Photovoltaic panel clamp  

SciTech Connect

A photovoltaic panel clamp includes an upper and lower section. The interface between the assembled clamp halves and the module edge is filled by a flexible gasket material, such as EPDM rubber. The gasket preferably has small, finger like protrusions that allow for easy insertion onto the module edge while being reversed makes it more difficult to remove them from the module once installed. The clamp includes mounting posts or an integral axle to engage a bracket. The clamp also may include a locking tongue to secure the clamp to a bracket.

Mittan, Margaret Birmingham (Oakland, CA); Miros, Robert H. J. (Fairfax, CA); Brown, Malcolm P. (San Francisco, CA); Stancel, Robert (Loss Altos Hills, CA)

2012-06-05T23:59:59.000Z

78

Photovoltaic panel clamp  

DOE Patents (OSTI)

A photovoltaic panel clamp includes an upper and lower section. The interface between the assembled clamp halves and the module edge is filled by a flexible gasket material, such as EPDM rubber. The gasket preferably has small, finger like protrusions that allow for easy insertion onto the module edge while being reversed makes it more difficult to remove them from the module once installed. The clamp includes mounting posts or an integral axle to engage a bracket. The clamp also may include a locking tongue to secure the clamp to a bracket.

Brown, Malcolm P.; Mittan, Margaret Birmingham; Miros, Robert H. J.; Stancel, Robert

2013-03-19T23:59:59.000Z

79

Training Topic Group Conference Call June 16, 1999 ROLL CALL  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

June 16, 1999 ROLL CALL Aubrey Godwin Larry Grove Deena LaRue Carol O'Claire Jim Price Scott Ramsay Bill Ruting Randy Small STATUS OF TRAINING MODULES The subcontractor has...

80

WIPP_Panel_7_Approved  

NLE Websites -- All DOE Office Websites (Extended Search)

Panel 7 Certified and Ready for Waste Disposal Panel 7 Certified and Ready for Waste Disposal CARLSBAD, N.M., August 1, 2013 - In mid-July 2013, the New Mexico Environment Department (NMED) approved the use of Panel 7 for disposal of defense- related transuranic (TRU) waste at the Department of Energy (DOE) Waste Isolation Pilot Plant (WIPP). Approval by NMED for each underground waste disposal panel prior to use is required under the WIPP Hazardous Waste Facility Permit (Permit). A panel consists of seven waste disposal rooms and each room is approximately 13 feet high, 33 feet wide and 300 feet long. Mining and outfitting, which includes installation of electricity, monitoring equipment and air regulating bulkheads, of a panel takes about two to two and a half years. Once the mining and outfitting are completed,

Note: This page contains sample records for the topic "flat panel called" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Thermal insulations using vacuum panels  

DOE Patents (OSTI)

Thermal insulation vacuum panels are formed of an inner core of compressed low thermal conductivity powders enclosed by a ceramic/glass envelope evaluated to a low pressure.

Glicksman, Leon R. (Lynnfield, MA); Burke, Melissa S. (Pittsburgh, PA)

1991-07-16T23:59:59.000Z

82

Corrugated cover plate for flat plate collector  

SciTech Connect

A flat plate radiant energy collector is providing having a transparent cover. The cover has a V-corrugated shape which reduces the amount of energy reflected by the cover away from the flat plate absorber of the collector.

Hollands, K. G. Terry (Elora, CA); Sibbitt, Bruce (Waterloo, CA)

1978-01-01T23:59:59.000Z

83

Flat heat pipe design, construction, and analysis  

SciTech Connect

This paper details the design, construction and partial analysis of a low temperature flat heat pipe in order to determine the feasibility of implementing flat heat pipes into thermophotovoltaic (TPV) energy conversion systems.

Voegler, G.; Boughey, B.; Cerza, M.; Lindler, K.W.

1999-08-02T23:59:59.000Z

84

Rocky Flats Cleanup Agreement implementation successes and challenges  

SciTech Connect

On July 19, 1996 the US Department of Energy (DOE), State of Colorado (CDPHE), and US Environmental Protection Agency (EPA) entered into an agreement called the Rocky Flats Cleanup Agreement (RFCA) for the cleanup and closure of the Rocky Flats Environmental Technology Site (RFETS or Rocky Flats). Major elements of the agreement include: an Integrated Site-Wide Baseline; up to twelve significant enforceable milestones per year; agreed upon soil and water action levels and standards for cleanup; open space as the likely foreseeable land use; the plutonium and TRU waste removed by 2015; streamlined regulatory process; agreement with the Defense Nuclear Facilities Safety Board (DNFSB) to coordinate activities; and a risk reduction focus. Successful implementation of RFCA requires a substantial effort by the parties to change their way of thinking about RFETS and meet the deliverables and commitments. Substantial progress toward Site closure through the implementation of RFCA has been accomplished in the short time since the signing, yet much remains to be done. Much can be learned from the Rocky Flats experience by other facilities in similar situations.

Shelton, D.C.

1997-02-01T23:59:59.000Z

85

Microsoft Word - EJ Conference call for papers.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Presents Presents WASHINGTON, DC MAY 27-29, 2009 CALL FOR PRESENTATIONS The State of Environmental Justice in America 2009 Conference planners are inviting individuals to submit a short abstract of no more than 150 words that describes a paper or individual or panel presentation related to the current state of environmental justice. The abstract should include the submitter's name and full contact information. Submissions Abstracts should be sent to: ejinamerica@hotmail.com. Relevant Dates Abstract Due: December 15, 2008 Notice of Acceptance Received: January 21-February 1, 2009 Response to Notice of Acceptance Due by: February 15, 2009 Presenters Contacted by Panel Managers: March 1-31, 2009 Presentations Due: May 1, 2009

86

Smooth Brome Monitoring at Rocky Flats-2005 Results | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Smooth Brome Monitoring at Rocky Flats-2005 Results Smooth Brome Monitoring at Rocky Flats-2005 Results Smooth Brome Monitoring at Rocky Flats-2005 Results Smooth Brome Monitoring...

87

DOE - Office of Legacy Management -- Rocky Flats External Resources  

Office of Legacy Management (LM)

Rocky Flats Stewardship Council Disclaimer Rocky Flats Cold War Museum Disclaimer U.S. Fish and Wildlife Service Rocky Flats National Wildlife Refuge Disclaimer Last Updated: 51...

88

Plane and parabolic solar panels  

E-Print Network (OSTI)

We present a plane and parabolic collector that absorbs radiant energy and transforms it in heat. Therefore we have a panel to heat water. We study how to increment this capture of solar beams onto the panel in order to increase its efficiency in heating water.

Sales, J H O

2009-01-01T23:59:59.000Z

89

Plane and parabolic solar panels  

E-Print Network (OSTI)

We present a plane and parabolic collector that absorbs radiant energy and transforms it in heat. Therefore we have a panel to heat water. We study how to increment this capture of solar beams onto the panel in order to increase its efficiency in heating water.

J. H. O. Sales; A. T. Suzuki

2009-05-14T23:59:59.000Z

90

Solar photovoltaic panels tracking system  

Science Conference Proceedings (OSTI)

This research project concentrates on the design and control of a two-degrees-of-freedom orientation system for the photovoltaic solar panels in sunny regions which are considered very rich in solar energy. A brief background on the sun path and behavior ... Keywords: altitude, azimuth, closed-loop control, open-loop control, orientation, sensor, solar photovoltaic panels, solar tracking

Ahmed Abu Hanieh

2010-05-01T23:59:59.000Z

91

Transportation Protocols Working Group First Conference Call...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Call March 1, 1999 Conference Call Summary The first conference call of the Transportation External Coordination Working Group (TECWG) DOE Transportation Protocols Working...

92

FEMA Think Tank Call Meeting  

NLE Websites -- All DOE Office Websites (Extended Search)

FEMA Think Tank Call Meeting FEMA Think Tank Call Meeting Minimize Date: Wednesday, September 25, 2013 Time: 1:00 - 2:30 p.m. (Eastern Time) Location: Y-12 New Hope Center, 602 Scarboro Rd, Oak Ridge, TN 37830 Overview Description: The FEMA Think Tank is a mechanism to formally collect, discuss, evaluate, and develop innovative ideas in the emergency management community - state, local, and tribal governments, as well as members of the public, including the private sector, the disability community, and volunteer groups. It ensures whole community partners and federal employees are motivated and encouraged to innovate, actively solicit and discuss ideas, and oversee the implementation of promising ideas. The FEMA Think Tank is designed to act as a forum where good ideas are shared, discussed, and become innovative solutions. There are currently two components to the think tank. The first, an online component, can be accessed at any time at, http://fema.ideascale.com. The second component is a conference call that includes both a nationwide telephone audience and an audience at the FEMA Think Tank Call site. This second component is described in more detail at the following website: http://www.fema.gov/fema-think-tank.

93

Panelized wall system with foam core insulation  

DOE Patents (OSTI)

A wall system includes a plurality of wall members, the wall members having a first metal panel, a second metal panel, and an insulating core between the first panel and the second panel. At least one of the first panel and the second panel include ridge portions. The insulating core can be a foam, such as a polyurethane foam. The foam can include at least one opacifier to improve the k-factor of the foam.

Kosny, Jan (Oak Ridge, TN); Gaskin, Sally (Houston, TX)

2009-10-20T23:59:59.000Z

94

Closing Rocky Flats by 2006  

Science Conference Proceedings (OSTI)

Safely accelerating the closure of Rocky Flats to 2006 is a goal shared by many: the State of Colorado, the communities surrounding the site, the U.S. Congress, the Department of Energy, Kaiser-Hill and its team of subcontractors, the site's employees, and taxpayers across the country. On June 30, 2000, Kaiser-Hill (KH) submitted to the Department of Energy (DOE), KH's plan to achieve closure of Rocky Flats by December 15, 2006, for a remaining cost of $3.96 billion (February 1, 2000, to December 15, 2006). The Closure Project Baseline (CPB) is the detailed project plan for accomplishing this ambitious closure goal. This paper will provide a status report on the progress being made toward the closure goal. This paper will: provide a summary of the closure contract completion criteria; give the current cost and schedule variance of the project and the status of key activities; detail important accomplishments of the past year; and discuss the challenges ahead.

Tuor, N. R.; Schubert, A. L.

2002-02-26T23:59:59.000Z

95

Exascale Workshop Panel Report Meeting  

SciTech Connect

The Exascale Review Panel consists of 12 scientists and engineers with experience in various aspects of high-performance computing and its application, development, and management. The Panel hear presentations by several representatives of the workshops and town meetings convened over the past few years to examine the need for exascale computation capability and the justification for a U.S. Department of Energy (DOE) program to develop such capability. This report summarizes information provided by the presenters and substantial written reports to the Panel in advance of the meeting in Washington D.C. on January 19-20, 2010. The report also summarizes the Panel's conclusions with regard to the justification of a DOE-led exascale initiative.

Khaleel, Mohammad A.

2010-07-01T23:59:59.000Z

96

Exascale Workshop Panel Report Meeting  

SciTech Connect

The Exascale Review Panel consists of 12 scientists and engineers with experience in various aspects of high-performance computing and its application, development, and management. The Panel hear presentations by several representatives of the workshops and town meetings convened over the past few years to examine the need for exascale computation capability and the justification for a U.S. Department of Energy (DOE) program to develop such capability. This report summarizes information provided by the presenters and substantial written reports to the Panel in advance of the meeting in Washington D.C. on January 19-20, 2010. The report also summarizes the Panel's conclusions with regard to the justification of a DOE-led exascale initiative.

Khaleel, Mohammad A.

2010-07-01T23:59:59.000Z

97

Thermal Testing of Tow-Placed Variable Stiffness Panels  

E-Print Network (OSTI)

Commercial systems for precise placement of pre-preg composite tows are enabling technology that allows fabrication of advanced composite structures in which the tows may be precisely laid down along curvilinear paths within a given ply. For laminates with curvilinear tow paths, the fiber orientation angle varies continuously throughout the laminate, and is not required to be straight and parallel in each ply as in conventional composite laminates. Hence, the stiffness properties vary as a function of location in the laminate, and the associated composite structure is called a Òvariable stiffnessÓ composite structure. Previous analytical studies indicate that variable stiffness structures have great potential for improving the structural performance of composite structures. In the present research, an experimental program has been conducted to evaluate the thermal performance of two variable stiffness panels fabricated using the Viper Fiber Placement System developed by Cincinnati Machine. These variable stiffness panels have the same layup, but one panel has overlapping tows and the other panel does not. Results of thermal tests of the variable stiffness panels are presented and com-

K. Chauncey Wu; Zafer Gÿrdal

2001-01-01T23:59:59.000Z

98

Rocky Flats resumes shipments to WIPP  

NLE Websites -- All DOE Office Websites (Extended Search)

of Energy (DOE) has resumed transuranic radioactive waste shipments from DOE's Rocky Flats Environmental Technology Site (RFETS) to the Waste Isolation Pilot Plant (WIPP). A...

99

Rocky Flats Neutron Detector Testing at Valduc, France  

Science Conference Proceedings (OSTI)

Recent program requirements of the US Department of Energy/NNSA have led to a need for a criticality accident alarm system to be installed at a newly activated facility. The Criticality Safety Group of the Lawrence Livermore National Laboratory (LLNL) was able to recover and store for possible future use approximately 200 neutron criticality detectors and 20 master alarm panels from the former Rocky Flats Plant in Golden, Colorado when the plant was closed. The Criticality Safety Group participated in a facility analysis and evaluation, the engineering design and review process, as well as the refurbishment, testing, and recalibration of the Rocky Flats criticality alarm system equipment to be used in the new facility. In order to demonstrate the functionality and survivability of the neutron detectors to the effects of an actual criticality accident, neutron detector testing was performed at the French CEA Valduc SILENE reactor from October 7 to October 19, 2010. The neutron detectors were exposed to three criticality events or pulses generated by the SILENE reactor. The first excursion was performed with a bare or unshielded reactor, and the second excursion was made with a lead shielded/reflected reactor, and the third excursion with a polyethylene reflected core. These tests of the Rocky Flats neutron detectors were performed as a part of the 2010 Criticality Accident Alarm System Benchmark Measurements at the SILENE Reactor. The principal investigators for this series of experiments were Thomas M. Miller and John C. Wagner of the Oak Ridge National Laboratory, with Nicolas Authier and Nathalie Baclet of CEA Valduc. Several other organizations were also represented, including the Y-12 National Security Complex, Lawrence Livermore National Laboratory, Los Alamos National Laboratory, CEA Saclay, and Babcock International Group.

Kim, S S; Dulik, G M

2011-01-03T23:59:59.000Z

100

Analysis of 3-panel and 4-panel microscale ionization sources  

Science Conference Proceedings (OSTI)

Two designs of a microscale electron ionization (EI) source are analyzed herein: a 3-panel design and a 4-panel design. Devices were fabricated using microelectromechanical systems technology. Field emission from carbon nanotube provided the electrons for the EI source. Ion currents were measured for helium, nitrogen, and xenon at pressures ranging from 10{sup -4} to 0.1 Torr. A comparison of the performance of both designs is presented. The 4-panel microion source showed a 10x improvement in performance compared to the 3-panel device. An analysis of the various factors affecting the performance of the microion sources is also presented. SIMION, an electron and ion optics software, was coupled with experimental measurements to analyze the ion current results. The electron current contributing to ionization and the ion collection efficiency are believed to be the primary factors responsible for the higher efficiency of the 4-panel microion source. Other improvements in device design that could lead to higher ion source efficiency in the future are also discussed. These microscale ion sources are expected to find application as stand alone ion sources as well as in miniature mass spectrometers.

Natarajan, Srividya; Parker, Charles B.; Glass, Jeffrey T. [Department of Electrical and Computer Engineering, Duke University, Durham, North Carolina 27708 (United States); Piascik, Jeffrey R.; Gilchrist, Kristin H. [Center for Materials and Electronic Technologies, RTI International, Research Triangle Park, North Carolina 27709 (United States); Stoner, Brian R. [Department of Electrical and Computer Engineering, Duke University, Durham, North Carolina 27708 (United States); Center for Materials and Electronic Technologies, RTI International, Research Triangle Park, North Carolina 27709 (United States)

2010-06-15T23:59:59.000Z

Note: This page contains sample records for the topic "flat panel called" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Training Topic Group Conference Call March 17, 1999 ROLL CALL  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

March 17, 1999 March 17, 1999 ROLL CALL Aubrey Godwin Deena LaRue Corrine Macaluso Tammy Ottmer Bill Ruting Gordon Veerman STATUS OF TRAINING MODULES A new name has been selected for the base training modules: MERRTT - Modular Emergency Response Radiological Transportation Training. There was a meeting held in Chicago on March 11-12 to complete a final review of the modules prior to distributing them for final comments. Those in attendance were: Jim Price, Tom Clawson, Jeff Everitt, Bill Ruting, and Gordon Veerman. The modules will be distributed to approximately 84 people on Friday, March 19, 1999, and comments are to be submitted to Jim Price by Monday, April 5, 1999. This short review period is required in order to address any significant comments and still have the modules ready for TEC/WG approval in July.

102

Training Topic Group Conference Call June 16, 1999 ROLL CALL  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

June 16, 1999 June 16, 1999 ROLL CALL Aubrey Godwin Larry Grove Deena LaRue Carol O'Claire Jim Price Scott Ramsay Bill Ruting Randy Small STATUS OF TRAINING MODULES The subcontractor has forwarded to HAMMER one hardcopy and CD-ROM containing Modules 1-4 student workbooks, instructor guides, and viewgraphs for review. Review comments are being incorporated, and corrected CD-ROM will be forwarded to HAMMER tomorrow. Modules 1-4 material will be used during the July TEC/WG breakout sessions where facilitated and self-study training pilots will be conducted. Scott Ramsay, Rich Gale, and Wilbur Smith will be trainers for the facilitated sessions. Bill Ruting will conduct one self-study session, and another person will be identified to conduct the other self-study session as Tom Breckenridge is unavailable to assist. Modules

103

Lag and ghosting in a clinical flat-panel selenium digital mammography system  

Science Conference Proceedings (OSTI)

We present measurements of lag and ghosting in a FDA-approved digital mammography system that uses a dielectric/selenium based detector structure. Lag is the carryover of signal from a previous image, whereas ghosting is the reduction of sensitivity caused by previous exposure history of the detector. Data from six selenium units were acquired. For the type of selenium detector tested, and under typical clinical usage conditions, the lag was as high as 0.15% of source signal and the ghosting could be as high as 15%. The amount of lag and ghosting varied from unit to unit. Results were compared with data acquired on a phosphor-based full-field digital mammography system. Modifications in the technology of the selenium detectors appear to have resulted in a marked decrease in both lag and ghosting effects in more recent systems.

Bloomquist, Aili K.; Yaffe, Martin J.; Mawdsley, Gordon E.; Hunter, David M.; Beideck, Daniel J. [Sunnybrook and Women's College Health Sciences Centre, Toronto, Ontario M4N 3M5 (Canada); Fletcher Allan Health Care, University of Vermont, Burlington, Vermont 05401 (United States)

2006-08-15T23:59:59.000Z

104

Whiskey Flats Geothermal Area | Open Energy Information  

Open Energy Info (EERE)

Whiskey Flats Geothermal Area Whiskey Flats Geothermal Area Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Geothermal Resource Area: Whiskey Flats Geothermal Area Contents 1 Area Overview 2 History and Infrastructure 3 Regulatory and Environmental Issues 4 Exploration History 5 Well Field Description 6 Geology of the Area 7 Geofluid Geochemistry 8 NEPA-Related Analyses (1) 9 Exploration Activities (0) 10 References Map: Whiskey Flats Geothermal Area Whiskey Flats Geothermal Area Location Map Area Overview Geothermal Area Profile Location: Nevada Exploration Region: Walker-Lane Transition Zone Geothermal Region GEA Development Phase: none"None" is not in the list of possible values (Phase I - Resource Procurement and Identification, Phase II - Resource Exploration and Confirmation, Phase III - Permitting and Initial Development, Phase IV - Resource Production and Power Plant Construction) for this property.

105

Press Conference Call Tomorrow: Agriculture Secretary Vilsack...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Press Conference Call Tomorrow: Agriculture Secretary Vilsack and Energy Secretary Chu to Discuss Efforts to Reduce U.S. Oil Dependence Press Conference Call Tomorrow: Agriculture...

106

Detector Advisory Panel (DAP) Report  

NLE Websites -- All DOE Office Websites (Extended Search)

ATLAS Project Manager's Review ATLAS Project Manager's Review 1-2 April 2010 Panel Members Lothar Bauerdick, FNAL Ray Larsen, SLAC Ronald Lipton, FNAL David Morrison, BNL Robert Roser, FNAL Steve Wolbers, FNAL Brookhaven National Laboratory Upton, New York 10 May 2010 Executive Summary The Detector and Computing Advisory Panels (DAP and CAP) reviewed the status and plans of the US-ATLAS Program at Brookhaven National Laboratory on April 1-2, 2010. The Panel was extremely pleased to hear of the highly successful commissioning of the ATLAS detector during early LHC collisions. The detector operated successfully, with no worse than 97% active channel count in any subsystem, from the start of collisions. There appears to be an excellent understanding of the detector performance via simulations. The BNL computing center has

107

Isothermal process solar collector panel  

SciTech Connect

An isothermal process solar collector panel is disclosed. The panel includes a collector plate for absorbing radiant heat; and a plurality of isothermal process heat pipes in an array over a surface of the collector plate. Each heat pipe is closed at both ends and contains thermodynamic working fluid for transferring heat energy from the collector plate to a second fluid fowing through a manifold pipe for conducting the heat energy from the collector panel. The manifold pipe is coupled to the collector plate and has an evaporator section wherein heat energy is transferred from the collector plate to the thermodynamic working fluid; and the other end of each heat pipe is positioned within the manifold pipe ad has a condenser section wherein heat energy is transferred from the thermodynamic working fluid to the second fluid flowing through the manifold pipe.

Watt, R.E.

1978-11-28T23:59:59.000Z

108

Plasma Panel Based Radiation Detectors  

Science Conference Proceedings (OSTI)

The plasma panel sensor (PPS) is a gaseous micropattern radiation detector under current development. It has many operational and fabrication principles common to plasma display panels (PDPs). It comprises a dense matrix of small, gas plasma discharge cells within a hermetically sealed panel. As in PDPs, it uses non-reactive, intrinsically radiation-hard materials such as glass substrates, refractory metal electrodes, and mostly inert gas mixtures. We are developing these devices primarily as thin, low-mass detectors with gas gaps from a few hundred microns to a few millimeters. The PPS is a high gain, inherently digital device with the potential for fast response times, fine position resolution (< 50 m RMS) and low cost. In this paper we report here on prototype PPS experimental results in detecting betas, protons and cosmic muons, and we extrapolate on the PPS potential for applications including detection of alphas, heavy-ions at low to medium energy, thermal neutrons and X-rays.

Friedman, Dr. Peter S. [Integrated Sensors, LLC; Varner Jr, Robert L [ORNL; Ball, Robert [University of Michigan; Beene, James R [ORNL; Ben Moshe, M. [Tel Aviv University; Benhammou, Yan [Tel Aviv University; Chapman, J. Wehrley [University of Michigan; Etzion, E [Tel Aviv University; Ferretti, Claudio [University of Michigan; Bentefour, E [Ion Beam Applications; Levin, Daniel S. [University of Michigan; Moshe, M. [Tel Aviv University; Silver, Yiftah [Tel Aviv University; Weaverdyck, Curtis [University of Michigan; Zhou, Bing [University of Michigan

2013-01-01T23:59:59.000Z

109

Solar Decathlon Technology Spotlight: Structural Insulated Panels |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Decathlon Technology Spotlight: Structural Insulated Panels Decathlon Technology Spotlight: Structural Insulated Panels Solar Decathlon Technology Spotlight: Structural Insulated Panels September 20, 2011 - 7:13am Addthis These structural insulated panels consist of foam insulation sandwiched between oriented strand boards. (Courtesy of Michael Bacchler) These structural insulated panels consist of foam insulation sandwiched between oriented strand boards. (Courtesy of Michael Bacchler) Alexis Powers EDITOR'S NOTE: Originally posted on the Solar Decathlon News Blog on September 19, 2011. Editor's Note: This post is one of a series of technology spotlights that introduces common technologies used in U.S. Department of Energy Solar Decathlon team houses. Structural insulated panels (SIPs) are prefabricated structural elements

110

Rocky Flats ash test procedure (sludge stabilization)  

SciTech Connect

Rocky Flats Ash items have been identified as the next set of materials to be stabilized. This test is being run to determine charge sizes and soak times to completely stabilize the Rocky Flats Ash items. The information gathered will be used to generate the heating rampup cycle for stabilization. This test will also gain information on the effects of the glovebox atmosphere (moisture) on the stabilized material. This document provides instructions for testing Rocky Flats Ash in the HC-21C muffle furnace process.

Winstead, M.L.

1995-09-14T23:59:59.000Z

111

Peg supported thermal insulation panel  

DOE Patents (OSTI)

A thermal insulation panel which is lightweight, load bearing, accommodates thermal stress, and has excellent high temperature insulation capability comprising high performance insulation between thin metal walls supported by high density, high strength glass pegs made in compliance with specified conditions of time, temperature and pressure.

Nowobilski, Jeffert J. (Orchard Park, NY); Owens, William J. (Kenmore, NY)

1985-01-01T23:59:59.000Z

112

Peg supported thermal insulation panel  

DOE Patents (OSTI)

A thermal insulation panel which is lightweight, load bearing, accommodates thermal stress, and has excellent high temperature insulation capability comprises high performance insulation between thin metal walls supported by high density, high strength glass pegs made in compliance with specified conditions of time, temperature and pressure. 2 figs.

Nowobilski, J.J.; Owens, W.J.

1985-04-30T23:59:59.000Z

113

Flat-Plate Photovoltaic Systems | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Flat-Plate Photovoltaic Systems Flat-Plate Photovoltaic Systems August 20, 2013 - 4:03pm Addthis The most common photovoltaic (PV) array design uses flat-plate PV modules or...

114

Photo of the Week: Rocky Flats Wildlife Refuge | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Rocky Flats Wildlife Refuge Photo of the Week: Rocky Flats Wildlife Refuge December 21, 2012 - 11:27am Addthis The Rocky Flats Plant was first established in 1951 as a nuclear...

115

REVEGETATION OF THE ROCKY FLATS SITE, COLORADO  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

REVEGETATION OF THE ROCKY FLATS SITE, COLORADO REVEGETATION OF THE ROCKY FLATS SITE, COLORADO Jody K. Nelson Professional Environmental Group/S.M. Stoller Corporation Rocky Flats Site 11025 Dover Street, Suite 1000 Westminster, CO 80021 ABSTRACT At the U.S. Department of Energy's (DOE's) Rocky Flats Site (Site), a former nuclear weapons component manufacturing plant near Golden, Colorado, approximately 650 acres were revegetated as part of the cleanup and closure activities. Numerous issues and challenges were addressed during the revegetation activities at the Site. These included deciding on revegetation and restoration goals; addressing poor substrate issues and soil compaction problems; use of soil amendments and topsoil; seed selection issues; timing and location of revegetation projects

116

Chestnut Flats Wind Farm | Open Energy Information  

Open Energy Info (EERE)

Chestnut Flats Wind Farm Chestnut Flats Wind Farm Jump to: navigation, search Name Chestnut Flats Wind Farm Facility Chestnut Flats Wind Farm Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner EnXco Developer Gamesa Energy Energy Purchaser Delmarva Power Location Logan Township PA Coordinates 40.357314°, -78.594482° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":40.357314,"lon":-78.594482,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

117

NPP Boreal Forest: Canal Flats, Canada  

NLE Websites -- All DOE Office Websites (Extended Search)

Canal Flats, Canada, 1984 Canal Flats, Canada, 1984 Data Citation Cite this data set as follows: Comeau, P. G., and J. P. Kimmins. 1999. NPP Boreal Forest: Canal Flats, Canada, 1984. Data set. Available on-line [http://www.daac.ornl.gov] from Oak Ridge National Laboratory Distributed Active Archive Center, Oak Ridge, Tennessee, U.S.A. Description Above and below-ground biomass and productivity of four lodgepole pine stands (Pinus contorta var. latifolia) were determined near Canal Flats, Canada, during the 1984 growing season. Two stands growing on xeric sites and two stands growing on mesic sites were studied to determine the influence of soil water content on resource allocation to above-ground versus below-ground plant components. The stands were 70-78 years old, unmanaged, and had regenerated naturally following wildfire.

118

Shepherds Flat Central | Open Energy Information  

Open Energy Info (EERE)

Shepherds Flat Central Shepherds Flat Central Jump to: navigation, search Name Shepherds Flat Central Facility Shepherds Flat Central Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner Caithness Developer Caithness Energy Purchaser Southern California Edison Co Location Gilliam and Morrow Counties OR Coordinates 45.655°, -120.056° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":45.655,"lon":-120.056,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

119

The Lidars in Flat Terrain (LIFT) Experiment  

Science Conference Proceedings (OSTI)

The authors describe and present early results from the July_August 1996 Lidars in Flat Terrain (LIFT) experiment. LIFT was a boundary layer experiment that made use of recently developed Doppler, aerosol backscatter, and ozone lidars, along with ...

Stephen A. Cohn; Shane D. Mayor; Christian J. Grund; Tammy M. Weckwerth; Christoph Senff

1998-07-01T23:59:59.000Z

120

Flat Ridge 2 Expansion | Open Energy Information  

Open Energy Info (EERE)

Flat Ridge 2 Expansion Flat Ridge 2 Expansion Jump to: navigation, search Name Flat Ridge 2 Expansion Facility Flat Ridge 2 Expansion Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner BP Wind Energy Developer BP Wind Energy Energy Purchaser Arkansas Electric Cooperative Corp Location Sharon KS Coordinates 37.383239°, -98.334088° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":37.383239,"lon":-98.334088,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

Note: This page contains sample records for the topic "flat panel called" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

MODIFICATIONS TO THE WIPP PANEL CLOSURE  

NLE Websites -- All DOE Office Websites (Extended Search)

Methods Assessment for Run-of-Mine Salt Panel Closures, Interim Report For Scenario 1 Testing, Washington TRU Solutions, Carlsbad New Mexico. Appendix 1-A 1-A-54 of 100 Panel...

122

Solar reflection panels - Energy Innovation Portal  

A solar collector comprising a glass mirror, and a composite panel, wherein the back of the mirror is affixed to a front surface of the composite panel. The composite ...

123

Solar Reflection Panels - Energy Innovation Portal  

Patent 7,077,532: Solar reflection panels A solar collector comprising a glass mirror, and a composite panel, wherein the back of the mirror is affixed to a front ...

124

DOE's Former Rocky Flats Weapons Production Site to Become National...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Former Rocky Flats Weapons Production Site to Become National Wildlife Refuge DOE's Former Rocky Flats Weapons Production Site to Become National Wildlife Refuge July 12, 2007 -...

125

Rocky Flats, Former Production Workers Screening Projects | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Flats, Former Production Workers Screening Projects Rocky Flats, Former Production Workers Screening Projects Project Name: National Supplemental Screening Program Covered DOE...

126

Landfill Cover Revegetation at the Rocky Flats Environmental...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Landfill Cover Revegetation at the Rocky Flats Environmental Technology Site Landfill Cover Revegetation at the Rocky Flats Environmental Technology Site Landfill Cover...

127

Preliminary Notice of Violation , Rocky Flats Environmental Technology...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Violation , Rocky Flats Environmental Technology Site - EA-96-05 Preliminary Notice of Violation , Rocky Flats Environmental Technology Site - EA-96-05 October 7, 1996 Preliminary...

128

Audit of the Contractor Incentive Programs at the Rocky Flats...  

NLE Websites -- All DOE Office Websites (Extended Search)

at the Rocky Flats Environmental Technology Site, IG-0411 Audit of the Contractor Incentive Programs at the Rocky Flats Environmental Technology Site, IG-0411 Report on "Audit...

129

Long-Term Surveillance and Maintenance at Rocky Flats: Early...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

at Rocky Flats: Early Experiences and Lessons Learned Long-Term Surveillance and Maintenance at Rocky Flats: Early Experiences and Lessons Learned Long-Term Surveillance and...

130

EA-1146: Radioactive Waste Storage at Rocky Flats Environmental...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

46: Radioactive Waste Storage at Rocky Flats Environmental Technology Site, Golden, Colorado EA-1146: Radioactive Waste Storage at Rocky Flats Environmental Technology Site,...

131

Vascular Flora of the Rocky Flats Area, Jefferson County, Colorado...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Vascular Flora of the Rocky Flats Area, Jefferson County, Colorado, USA Vascular Flora of the Rocky Flats Area, Jefferson County, Colorado, USA August 2010 Jody K. Nelson Vascular...

132

LM Records Handling System (LMRHS01) - Rocky Flats Environmental...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

here Home LM Records Handling System (LMRHS01) - Rocky Flats Environmental Records Database, Office of Legacy Management LM Records Handling System (LMRHS01) - Rocky Flats...

133

SLIDESHOW: Shepherds Flat Wind Farm | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Marketing Administration Other Agencies You are here Home SLIDESHOW: Shepherds Flat Wind Farm SLIDESHOW: Shepherds Flat Wind Farm Addthis 1 of 5 Image: Caithness Energy 1 of...

134

IOM panel recommends tripling vitamin D intake: Panel’s conservative approach receives criticism  

Science Conference Proceedings (OSTI)

The 102nd AOCS Annual Meeting & Expo, held in Cincinnati, Ohio, USA, May 1–4, 2011, featured a Hot Topic Symposium and subsequent panel discussion on the new intake recommendations for vitamin D made by the US Institute of Medicine. Science and health writ

135

Novel Lamination Method for Large Armor Panels  

Science Conference Proceedings (OSTI)

New Saccharification Process of Cellulosic Biomass by Microwave Irradiation · Novel Lamination Method for Large Armor Panels · Raman Spectroscopy for ...

136

Design of a photovoltaic central power station: flat-plate array  

DOE Green Energy (OSTI)

A design for a photovoltaic central power station using fixed flat-panel arrays has been developed. The 100 MW plant is assumed to be located adjacent to the Saguaro Power Station of Arizona Public Service. The design assumes high-efficiency photovoltaic modules using dendritic web cells. The modules are arranged in 5 MW subfields, each with its own power conditioning unit. The photovoltaic output is connected to the existing 115 kV utility switchyard. The site specific design allows detailed cost estimates for engineering, site preparation, and installation. Collector and power conditioning costs have been treated parametrically.

Not Available

1984-02-01T23:59:59.000Z

137

Microsoft Word - 17 082504 SSAB chairs conf call _minutes _.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

EMSSAB CHAIRS EMSSAB CHAIRS Bi-Monthly Conference Call Wednesday, August 25, 2004 3:00 - 4:30 p.m. Participants Chairs/Representatives: Fernald Jim Bierer, Gary Stegner Hanford Todd Martin Idaho David Kipping, Shannon Brennan, Larry Knight Nevada Charles Phillips NNM Menice Manzanares Oak Ridge Kerry Trammell, Pat Halsey, Pete Osborne, Norm Mulvenon Paducah Bill Tanner, David Dollins, Kendra Payne, Linda Long, Kim Crenshaw Rocky Flats Victor Holm, Ken Korkia, Karen Lutz Savannah River Jean Sulc, Mel Galin, de'Lisa Bratcher, Gerri Fleming, Dennis Godby DOE representatives: EM-30.1 Sandra Waisley (DFO), Jay Vivari, Frederick Dowd, Douglas Frost OPENING REMARKS Ms. Waisley welcomed everyone and commented that Mr. Vivari and his Steering

138

Structural Interactions in Spatial Panels  

E-Print Network (OSTI)

; Pesaran et al., 2004, Holly et al., 2008), socio-cultural distance (Conley and Topa, 2002; Bhattacharjee and Jensen-Butler, 2005), and transportation costs and time (Gibbons and Machin, 2005; Bhattacharjee and Jensen-Butler, 2005) have been highlighted... at higher lags in the dynamic panel data model), who are correlated with the above set of endogenous variables, but not with the idiosyncratic errors ?1?? ?2?? ? ? ? ? ??? from the interaction error equation (2). In social networks agents who have weak ties...

Bhattacharjee, Arnab; Holly, Sean

139

Random testing of C calling conventions  

Science Conference Proceedings (OSTI)

In a C compiler, function calls are difficult to implement correctly because they must respect a platform-specific calling convention. But they are governed by a simple invariant: parameters passed to a function must be received unaltered. A violation ... Keywords: C, calling convention, compiler, composition, consistency, random testing

Christian Lindig

2005-09-01T23:59:59.000Z

140

Flat Water Wind Farm | Open Energy Information  

Open Energy Info (EERE)

Flat Water Wind Farm Flat Water Wind Farm Jump to: navigation, search Name Flat Water Wind Farm Facility Flat Water Wind Farm Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner Gestamp Wind North America Developer Flat Water Wind Farm Energy Purchaser Omaha Public Power District Location Richardson County NE Coordinates 40.001077°, -95.955119° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":40.001077,"lon":-95.955119,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

Note: This page contains sample records for the topic "flat panel called" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Rocky Flats Compliance Program; Technology summary  

SciTech Connect

The Department of Energy (DOE) established the Office of Technology Development (EM-50) (OTD) as an element of Environmental Restoration and Waste Management (EM) in November 1989. The primary objective of the Office of Technology Development, Rocky Flats Compliance Program (RFCP), is to develop altemative treatment technologies for mixed low-level waste (wastes containing both hazardous and radioactive components) to use in bringing the Rocky Flats Plant (RFP) into compliance with Federal and state regulations and agreements. Approximately 48,000 cubic feet of untreated low-level mixed waste, for which treatment has not been specified, are stored at the RFP. The cleanup of the Rocky Flats site is driven by agreements between DOE, the Environmental Protection Agency (EPA), and the Colorado Department of Health (CDH). Under these agreements, a Comprehensive Treatment and Management Plan (CTMP) was drafted to outline the mechanisms by which RFP will achieve compliance with the regulations and agreements. This document describes DOE`s strategy to treat low-level mixed waste to meet Land Disposal Restrictions and sets specific milestones related to the regulatory aspects of technology development. These milestones detail schedules for the development of technologies to treat all of the mixed wastes at the RFP. Under the Federal Facilities Compliance Act (FFCA), the CTMP has been incorporated into Rocky Flats Plant Conceptual Site Treatment Plan (CSTP). The CSTP will become the Rocky Flats Plant site Treatment Plan in 1995 and will supersede the CTMP.

NONE

1994-02-01T23:59:59.000Z

142

Conformally flat spacetimes and Weyl frames  

E-Print Network (OSTI)

We discuss the concepts of Weyl and Riemann frames in the context of metric theories of gravity and state the fact that they are completely equivalent as far as geodesic motion is concerned. We apply this result to conformally flat spacetimes and show that a new picture arises when a Riemannian spacetime is taken by means of geometrical gauge transformations into a Minkowskian flat spacetime. We find out that in the Weyl frame gravity is described by a scalar field. We give some examples of how conformally flat spacetime configurations look when viewed from the standpoint of a Weyl frame. We show that in the non-relativistic and weak field regime the Weyl scalar field may be identified with the Newtonian gravitational potential. We suggest an equation for the scalar field by varying the Einstein-Hilbert action restricted to the class of conformally-flat spacetimes. We revisit Einstein and Fokker's interpretation of Nordstr\\"om scalar gravity theory and draw an analogy between this approach and the Weyl gauge formalism. We briefly take a look at two-dimensional gravity as viewed in the Weyl frame and address the question of quantizing a conformally flat spacetime by going to the Weyl frame.

C. Romero; J. B. Fonseca-Neto; M. L. Pucheu

2011-01-27T23:59:59.000Z

143

Sitewide risk perspectives for the Rocky Flats Environmental Technology Site  

SciTech Connect

The US Department of Energy (DOE) has recently finalized a closure plan (originally called the Ten Year Plan) for closure and environmental cleanup of previous nuclear weapons facilities. The DOE Rocky Flats Field Office has established priorities for risk reduction work to Support closure activities, as well as addressing those hazards associated with storage and management of radioactive materials and hazardous chemicals. To provide information for future National Environmental Policy Act (NEPA) or other regulatory assessments of specific risk reduction projects identified in the Closure Plan, a risk assessment of normal operations and potential accidents was recently prepared to provide an updated baseline of the cumulative impacts to the worker, public and environment due to the Site`s operations, activities, and environmental conditions in light of the Site`s change in mission, and of future closure projects. This paper summarizes the risk assessment approach, results, and conclusions.

Olinger, S.J. [Dept. of Energy, Golden, CO (United States). Rocky Flats Field Office; Foppe, T.L. [M.H. Chew and Associates, Inc., Golden, CO (United States)

1998-05-01T23:59:59.000Z

144

High Energy Physics Advisory Panel (HEPAP) Homepage | U.S. DOE Office of  

NLE Websites -- All DOE Office Websites (Extended Search)

HEPAP Home HEPAP Home High Energy Physics Advisory Panel (HEPAP) HEPAP Home Meetings Members .pdf file (20KB) Charges/Reports Charter .pdf file (44KB) HEP Committees of Visitors HEP Home Print Text Size: A A A RSS Feeds FeedbackShare Page P5 Planning The high energy physics research community is engaged in developing a ten-year plan for U.S. particle physics. To learn more about the so-called "P5" process, and to stay abreast of meetings, please click on the following external link: Particle Physics Project Prioritization Panel (P5) External link The High Energy Physics Advisory Panel (HEPAP) has advised the Federal Government on the national program in experimental and theoretical high energy physics (HEP) research since its inception in 1967. Since October 2000, the Panel now has joint ownership and continues to be chartered by

145

Alaska panel urges oil tanker changes  

Science Conference Proceedings (OSTI)

A commission assigned by the state of Alaska to investigate the Exxon Valdez oil spill says the Coast Guard's regulation of oil transportation had grown slack over the decade preceding the 11 million-gallon spill. The vigilance over tanker traffic that was established in the early days of pipeline flow had given way to complacency and neglect, says the commission's report, which calls for a revamping of the U.S. oil transportation system. The review places the blame for the spill not only on the Coast Guard but on the oil industry's thirst for profits in the 1980s and blames the state itself for not living up to its obligation to manage and protect its own waters. The report offers 59 recommendations that cover tanker construction and crew training, spill prevention, strategies for responding to spills and cleanup technologies. The panel also wants to see more stringent tanker safety standards, strengthened enforcement of the new regulations and greater penalties levied against violators. The Coast Guard expects that it will be some time before revisions in its tanker monitoring operations are in place.

Dillingham, S.

1990-02-05T23:59:59.000Z

146

Flat Ridge 2 | Open Energy Information  

Open Energy Info (EERE)

Flat Ridge 2 Flat Ridge 2 Facility Flat Ridge 2 Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner BP Wind Energy / Sempra Energy Developer BP Wind Energy Energy Purchaser Associated Electric Cooperative Inc / Southwestern Electric Power Location Nashville KS Coordinates 37.367868°, -98.240757° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":37.367868,"lon":-98.240757,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

147

BOOMERanG Analysis Finds Flat Universe  

NLE Websites -- All DOE Office Websites (Extended Search)

BOOMERanG Analysis BOOMERanG Analysis Finds Flat Universe BOOMERanG Analysis Finds Flat Universe NERSC's Mcurie System Helps Uncover Evidence of 'Cosmological Constant' Proposed, Rejected by Einstien December 12, 1999 Newly released data from the 1997 North American test flight of BOOMERanG, which mapped anisotropies in the cosmic microwave background radiation (CMB) in a narrow strip of sky, show a pronounced peak in the CMB "power spectrum" at an angular scale of about one degree, strong evidence that the universe is flat. Analyzed at the Department of Energy's National Energy Research Scientific Computing Center (NERSC) at Lawrence Berkeley National Laboratory, the new data also suggest the existence of a cosmological constant, a form of countergravitational "dark energy" thought to fill the universe.

148

Keywords: Photovoltaic System, fault-tolerance, recon-figurable PV panel  

E-Print Network (OSTI)

1 Keywords: Photovoltaic System, fault-tolerance, recon- figurable PV panel Photovoltaic (PV plants, and satellites. The output power of a PV cell (also called solar cell) is dependent on the solar irradiance level and temperature. Figure 1 shows PV cell output current-voltage and power

Pedram, Massoud

149

Development of OLED panel defect detection system through improved otsu algorithm  

Science Conference Proceedings (OSTI)

OLED (Organic light-emitting) displays have been called the next generation of display devices for their unique properties: colorful images, large viewing angle, light weight and power efficiency. Complex manufacture processing makes the screen have ... Keywords: OLED panel, Otsu method, defect detection, image segmentation, subtraction operation

Jian Gao; Zhiliang Wang; Yanyun Liu; Chuanxia Jian; Xin Chen

2012-10-01T23:59:59.000Z

150

Issues evaluation process at Rocky Flats Plant  

SciTech Connect

This report describes the issues evaluation process for Rocky Flats Plant as established in July 1990. The issues evaluation process was initiated February 27, 1990 with a Charter and Process Overview for short-term implementation. The purpose of the process was to determine the projects required for completion before the Phased Resumption of Plutonium Operations. To determine which projects were required, the issues evaluation process and emphasized risk mitigation, based on a ranking system. The purpose of this report is to document the early design of the issues evaluation process to record the methodologies used that continue as the basis for the ongoing Issues Management Program at Rocky Flats Plant.

Smith, L.C.

1992-04-16T23:59:59.000Z

151

Concentrating Solar Panels: Bringing the Highest Power and Lowest Cost to the Rooftop  

DOE Green Energy (OSTI)

Soliant Energy is a venture-capital-backed startup focused on bringing advanced concentrating solar panels to market. Our fundamental innovation is that we are the first company to develop a racking solar concentrator specifically for commercial rooftop applications, resulting in the lowest LCOE for rooftop electricity generation. Today, the commercial rooftop segment is the largest and fastest-growing market in the solar industry. Our concentrating panels can make a major contribution to the SAI's objectives: reducing the cost of solar electricity and rapidly deploying capacity. Our commercialization focus was re-shaped in 2009, shifting from an emphasis solely on panel efficiency to LCOE. Since the inception of the SAI program, LCOE has become the de facto standard for comparing commercial photovoltaic systems. While estimation and prediction models still differ, the emergence of performance-based incentive (PBI) and feed-in tariff (FIT) systems, as well as power purchase agreement (PPA) financing structures make LCOE the natural metric for photovoltaic systems. Soliant Energy has designed and demonstrated lower-cost, higher-power solar panels that consists of 6 (500X) PV module assemblies utilizing multi-junction cells and an integrated two-axis tracker. In addition, we have designed and demonstrated a prototype 1000X panel assembly with 8. Cost reductions relative to conventional flat panel PV systems were realized by (1) reducing the amount of costly semiconductor material and (2) developing strategies and processes to reduce the manufacturing costs of the entire system. Performance gains against conventional benchmarks were realized with (1) two-axis tracking and (2) higher-efficiency multi-junction PV cells capable of operating at a solar concentration ratio of 1000X (1000 kW/m2). The program objectives are: (1) Develop a tracking/concentrating solar module that has the same geometric form factor as a conventional flat, roof mounted photovoltaic (PV) panel - the Soliant module will produce more power and cost less than conventional panels of the same size; (2) Target LCOE: $0.079/kWh in 2010; (3) Target efficiency - 26% in 2010 (22% for 2008 prototype, 24% for 2009 pilot); and (4) Target performance - equivalent to 650Wp in 2010 (490W for 2008 prototype, 540W for 2009 pilot).

Michael Deck; Rick Russell

2010-01-05T23:59:59.000Z

152

Energy Department Answering President's Call on Commericalization |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Department Answering President's Call on Commericalization Energy Department Answering President's Call on Commericalization Energy Department Answering President's Call on Commericalization October 28, 2011 - 12:22pm Addthis Energy Department Answering President's Call on Commericalization Karina Edmonds Karina Edmonds Technology Transfer Coordinator What are the key facts? Today the President issued guidance on accelerating technology transfer and commercialization from federally-funded research. In line with the President's call, the Energy Department will be taking a leading role in answering this call, including taking a comprehensive look at the metrics we utilize to assess our Tech Transfer activities. Today, the President issued guidance on accelerating technology transfer and commercialization from federally-funded research. As the largest funder

153

Energy Department Answering President's Call on Commericalization |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Answering President's Call on Commericalization Answering President's Call on Commericalization Energy Department Answering President's Call on Commericalization October 28, 2011 - 12:22pm Addthis Energy Department Answering President's Call on Commericalization Karina Edmonds Karina Edmonds Technology Transfer Coordinator What are the key facts? Today the President issued guidance on accelerating technology transfer and commercialization from federally-funded research. In line with the President's call, the Energy Department will be taking a leading role in answering this call, including taking a comprehensive look at the metrics we utilize to assess our Tech Transfer activities. Today, the President issued guidance on accelerating technology transfer and commercialization from federally-funded research. As the largest funder

154

Methods for streamlining expensive function calls.  

E-Print Network (OSTI)

??The focus of this thesis has been developing and validating new methods of streamlining expensive function calls. These new methods of streamlining are applied to… (more)

Taylor, Benjamin Jeppson

2011-01-01T23:59:59.000Z

155

Call for Book Authors and Editors  

Science Conference Proceedings (OSTI)

Call for Book Authors and Editors. The Minerals, Metals, and Materials Society ( TMS) and John Wiley & Sons have teamed up as publishing partners, bringing ...

156

Call for Abstracts | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Act Requests Stakeholder Relations 2013 National Environmental Justice Conference and Training Program Call for Abstracts Please join us for the 2013 National Environmental...

157

EM SSAB Conference Calls- November 20, 2008  

Energy.gov (U.S. Department of Energy (DOE))

Minutes and highlights of the Environmental Management (EM) Site Specific Advisory Board's (SSAB) Bi-Monthly conference call including Participants, DOE-HQ Representatives, Opening Remarks, Program...

158

EM SSAB Conference Calls- December 7, 2011  

Energy.gov (U.S. Department of Energy (DOE))

Minutes and highlights of the Environmental Management (EM) Site Specific Advisory Board's (SSAB) Bi-Monthly conference call including Participants, DOE-HQ Representatives, Opening Remarks, Program...

159

EM SSAB Conference Calls- September 19, 2011  

Energy.gov (U.S. Department of Energy (DOE))

Minutes and highlights of the Environmental Management (EM) Site Specific Advisory Board's (SSAB) Bi-Monthly conference call including Participants, DOE-HQ Representatives, Opening Remarks, Program...

160

Federal Energy Management Program: Call for Projects  

NLE Websites -- All DOE Office Websites (Extended Search)

FEMP issues calls for projects surrounding energy efficiency, renewable energy, and water conservation. On July 9, 2013, FEMP issued a notice of intent on the EERE Exchange...

Note: This page contains sample records for the topic "flat panel called" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

EM SSAB Conference Calls- August 15, 2012  

Energy.gov (U.S. Department of Energy (DOE))

Minutes and highlights of the Environmental Management (EM) Site Specific Advisory Board's (SSAB) Bi-Monthly conference call including Participants, DOE-HQ Representatives, Opening Remarks, Program...

162

Call Pre-Announcement for the first ERA-CAPS joint research call  

E-Print Network (OSTI)

Call Pre-Announcement for the first ERA-CAPS joint research call: "Expanding the European Research in national policies whilst continuing to fund excellent research in this area by means of two joint calls. In this first joint ERA-CAPS call, 14 funding organisations from 14 countries are participating1

Greifswald, Ernst-Moritz-Arndt-Universität

163

Solar Panels Â… A Life Story  

NLE Websites -- All DOE Office Websites (Extended Search)

PLAN PLAN Solar Panels: A Life Story Grade Level: 7-9 Subjects: Science & Economics Length: 3-4 Class Periods Solar Panels - A Life Story INTRODUCTION As solar power gains popularity, solar panels are quickly becoming a part of everyday life. However, the public knows surprisingly little about these energy sources. Where do solar panels come from? How do they work? How much do they really cost? This lesson plan will guide students toward answers by exploring the many factors that influence how solar panels are manufactured. LESSON OVERVIEW Grade Level & Subject: 7 - 9, Science and Economics Length: 3 - 4 class periods Objectives: After completing this lesson, students will be able to: ï‚· Identify the raw materials that comprise a solar (photovoltaic, or PV) panel, where

164

Flat Ridge Wind Farm | Open Energy Information  

Open Energy Info (EERE)

Flat Ridge Wind Farm Flat Ridge Wind Farm Jump to: navigation, search Name Flat Ridge Wind Farm Facility Flat Ridge Wind Farm Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner BP Wind Energy North America/Weststar Energy Developer BP Wind Energy North America Energy Purchaser Weststar Energy Location Barber County KS Coordinates 37.3694801°, -98.4603352° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":37.3694801,"lon":-98.4603352,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

165

`Convective` flat plate collectors and their applications  

SciTech Connect

The `convective` flat plate collector is a particular two-way collector system with air in gravity flow as primary working fluid. Its thermal characteristics are described. Results of outdoor tests and thermal simulations are shown. Different applications of the system are presented: water heating, steam generation for medical sterilization, solar cooking and space heating. 10 refs., 16 figs., 6 tabs.

Grupp, M.; Bergler, H.; Bertrand, J.P. [Synopsis, Lodeve (France); Kromer, B. [Institut fuer Umweltphysik der Universtaet, Heidelberg (Germany); Cieslok, J. [INCO, Aachen (Germany)

1995-12-31T23:59:59.000Z

166

Multi-clad black display panel  

DOE Patents (OSTI)

A multi-clad black display panel, and a method of making a multi-clad black display panel, are disclosed, wherein a plurality of waveguides, each of which includes a light-transmissive core placed between an opposing pair of transparent cladding layers and a black layer disposed between transparent cladding layers, are stacked together and sawed at an angle to produce a wedge-shaped optical panel having an inlet face and an outlet face.

Veligdan, James T. (Manorville, NY); Biscardi, Cyrus (Bellport, NY); Brewster, Calvin (North Patchogue, NY)

2002-01-01T23:59:59.000Z

167

Five-axis tool path generation for a flat-end tool based on iso-conic partitioning  

Science Conference Proceedings (OSTI)

Traditionally, for the flat-end tool, due to the intertwined dependence relationship between its axis and reference point, most 5-axis tool-path generation algorithms take a decoupled two-stage strategy: first, the so-called cutter contact (CC) curves ... Keywords: 5-axis NC machining, Kinematic performance, Local gouging, Tool orientation, Tool path planning

Nan Wang; Kai Tang

2008-12-01T23:59:59.000Z

168

Building Energy Software Tools Directory: Panel Shading  

NLE Websites -- All DOE Office Websites (Extended Search)

Audience Architects, builders, homeowners, passive solar designers, energy analysts, solar energy system installers. Input Location, surface tilt, panel spacing, tilt, and...

169

Powder Panels for Dry Bay Fire Protection  

Science Conference Proceedings (OSTI)

... powder panel by a rotor blade resulted in ... by one of the vehicle manufacturers for the ... specific requirement is proprietary to the manufacturer, but will ...

2011-10-20T23:59:59.000Z

170

Sandia National Laboratories Solar Reflection Panels  

Sandia National Laboratories Solar Reflection Panels HTTPS://IP.SANDIA.GOV Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia ...

171

Solar Decathlon Technology Spotlight: Structural Insulated Panels...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

20, 2011 - 7:13am Addthis These structural insulated panels consist of foam insulation sandwiched between oriented strand boards. (Courtesy of Michael Bacchler) These...

172

Gas-Filled Panels, High Performance Insulation  

NLE Websites -- All DOE Office Websites (Extended Search)

Gas-Filled Panels high performance insulation Windows & Daylighting | Building Technologies | Environmental Energy Technologies Division | Berkeley Lab gfp4b.jpg (5624 bytes)...

173

Radio Frequency Lamination for Photovoltaic Panels  

Science Conference Proceedings (OSTI)

Strategies for overcoming residual stress in interlayers surrounding embedded PV cells will be discussed. Working prototypes of RF laminated solar panels will ...

174

Heat pipes applied to flat-plate solar collectors. Final report  

SciTech Connect

The objective of this program was to analytically and experimentally investigate the use of heat pipes in flat-plate solar collectors. Heat pipes are passive heat transport devices which utilize a closed evaporation-condensation cycle. Because of their high equivalent conductance, they appear to be well suited to transport heat from the solar absorber to an air or liquid distribution system. The program consisted of the following tasks: (I) Configuration Studies, (II) Parametric Performance Studies, (III) Economic Analysis, (IV) System Integration Studies, (V) Submodule Fabrication and Testing (in the laboratory), and (VI) Full-Scale Module Fabrication and Testing (using solar input). An additional Task VII, Feasibility Study of a Stationary Concentrator, was identified during the program and was also completed. In performing Tasks I through IV, various aspects of integrating heat pipes into flat-palte solar collectors were investigated. The results of these tasks were reported in the Annual Progress Report (Ref. 2) dated January 31, 1975. A summary of that program effort is included in the present report. The results of the experimental work conducted under Tasks V and VI are presented in this report. Under Task V, breadboard heat pipes were fabricated from sections of Roll-Bond panels and their heat transfer performance was evaluated in the laboratory. Three complete solar panels, two of which were heat pipe absorbers and one was a Roll-Bond control panel, were fabricated and solar tested during Task VI. Finally, under the new Task VII, a feasibility study of a stationary concentrator using heat pipes as thermal diodes was conducted. Results are presented and discussed.

Bienert, W.B.; Wolf, D.A.

1976-05-01T23:59:59.000Z

175

Genetic structure, consanguineous marriages and economic development: Panel cointegration and panel cointegration neural network analyses  

Science Conference Proceedings (OSTI)

Consanguineous marriages and their effects on human beings in light of biological effects of genetic sicknesses are discussed in many studies. Among many, the likelihood of sicknesses such as phenylketonuria, thalassemia, Landsteiner-Fanconi-Anderson's ... Keywords: Cansanguine marriage, Economic development, Economic growth, Human genetics, Panel cointegration MLP model, Panel data analysis, Panel neural network analysis

Melike Bildirici; Özgür Ömer Ersin; Meltem Kökdener

2011-05-01T23:59:59.000Z

176

JGI - CSP Proposal Study Panel  

NLE Websites -- All DOE Office Websites (Extended Search)

User Programs User Programs Project Management Office Community Science Program Emerging Technologies Opportunity Program Technology Development Pilot Program Genomic Encyc. of Bacteria and Archaea MyJGI: Information for Collaborators The CSP Proposal Study Panel CSP | Overview | How to Propose a Project | Review Process | DOE Relevance Proposal Schedule | Project Management | Forms | FAQ | People and Contacts Members Nina Agabian University of California, San Francisco, http://www.ucsf.edu Chris Amemiya Benaroya Research Institute at Virginia Mason, http://www.benaroyaresearch.org Gary L. Andersen Lawrence Berkeley National Laboratory, http://www.lbl.gov Jo Ann Banks Purdue University, http://www.purdue.edu John Battista Louisiana State University, http://www.lsu.edu Fred Brockman

177

AQUEOUS HOMOGENEOUS REACTORTECHNICAL PANEL REPORT  

Science Conference Proceedings (OSTI)

Considerable interest has been expressed for developing a stable U.S. production capacity for medical isotopes and particularly for molybdenum- 99 (99Mo). This is motivated by recent re-ductions in production and supply worldwide. Consistent with U.S. nonproliferation objectives, any new production capability should not use highly enriched uranium fuel or targets. Conse-quently, Aqueous Homogeneous Reactors (AHRs) are under consideration for potential 99Mo production using low-enriched uranium. Although the Nuclear Regulatory Commission (NRC) has guidance to facilitate the licensing process for non-power reactors, that guidance is focused on reactors with fixed, solid fuel and hence, not applicable to an AHR. A panel was convened to study the technical issues associated with normal operation and potential transients and accidents of an AHR that might be designed for isotope production. The panel has produced the requisite AHR licensing guidance for three chapters that exist now for non-power reactor licensing: Reac-tor Description, Reactor Coolant Systems, and Accident Analysis. The guidance is in two parts for each chapter: 1) standard format and content a licensee would use and 2) the standard review plan the NRC staff would use. This guidance takes into account the unique features of an AHR such as the fuel being in solution; the fission product barriers being the vessel and attached systems; the production and release of radiolytic and fission product gases and their impact on operations and their control by a gas management system; and the movement of fuel into and out of the reactor vessel.

Diamond, D.J.; Bajorek, S.; Bakel, A.; Flanagan, G.; Mubayi, V.; Skarda, R.; Staudenmeier, J.; Taiwo, T.; Tonoike, K.; Tripp, C.; Wei, T.; Yarsky, P.

2010-12-03T23:59:59.000Z

178

Expert Panel: Forecast Future Demand for Medical Isotopes  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Expert Panel: Expert Panel: Forecast Future Demand for Medical Isotopes March 1999 Expert Panel: Forecast Future Demand for Medical Isotopes September 25-26, 1998 Arlington, Virginia The Expert Panel ............................................................................................. Page 1 Charge To The Expert Panel........................................................................... Page 2 Executive Summary......................................................................................... Page 3 Introduction ...................................................................................................... Page 4 Rationale.......................................................................................................... Page 6 Economic Analysis...........................................................................................

179

Kingspan Insulated Panels: Order (2013-CE-5353)  

Energy.gov (U.S. Department of Energy (DOE))

DOE ordered Kingspan Insulated Panels, Inc. to pay a $8,000 civil penalty after finding Kingspan Insulated Panels had failed to certify that any basic models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

180

Tectonic framework of Crater Flat basin, adjacent to Yucca Mountain, Nevada: A preliminary report  

SciTech Connect

Detailed mapping of 9.5--14 Ma volcanic rocks in Crater Flat (CF) and vicinity is being used to test alternative tectonic models which form a basis for seismic risk assessments for a potential nuclear waste repository at Yucca Mountain. Preliminary results are: (1) the southern margin of the basin is a NW-trending right-oblique-slip fault; (2) two down-to-the-east normal faults form the western boundary of the basin against 2 different structural domains, a little-extended uplift called Bare Mountain to the south, and the much-extended Fluorspar Hills (FH) to the north. These two domains are separated by the roughly E-trending, left-oblique-slip Fluorspar Canyon fault; (3) Crater Flat basin actually is separated from the Fluorspar Hills by a narrow septum, the Tram Ridge horst (TR), which was a localized site of nondeposition from 11.5--13.1 Ma, and which experienced only minor extension during the peak periods of extension, at 12 and < 11 Ma, in Crater Flat and the Fluorspar Hills, respectively; (4) normal faults within Crater Flat are radial to, and largely decrease in throw northward toward the Timber Mountain caldera complex, which appears to have acted as a pivot point during opening of the basin; (5) increased faulting and tilting of strata with age reflects intermittent tectonism in Crater Flat throughout the volcanic period. The data also suggest a change in least principal stress direction from NNW before 13.1 Ma to WNW after. In combination, these results indicate that Crater Flat basin formed by simultaneous E-W extension and NW-directed right-lateral shear; it could be described as a half-rhombochasm. To date, the authors find no support for a model that explains the basin as a buried caldera. Future mapping is planned to test the differing predictions of strike-slip (Walker Lane) and detachment-fault models.

Fridrich, C. (Geological Survey, Denver, CO (United States). Federal Center); Price, J. (Michigan State Univ., East Lansing, MI (United States). Geology Dept.)

1992-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "flat panel called" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Windy Flats Phase III | Open Energy Information  

Open Energy Info (EERE)

Phase III Phase III Jump to: navigation, search Name Windy Flats Phase III Facility Windy Flats Phase III Sector Wind energy Facility Type Commercial Scale Wind Facility Status Proposed Owner Cannon Power Group Developer Cannon Power Group Location Goldendale WA Coordinates 45.76201437°, -120.5455971° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":45.76201437,"lon":-120.5455971,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

182

Windy Flats IIa extension | Open Energy Information  

Open Energy Info (EERE)

IIa extension IIa extension Jump to: navigation, search Name Windy Flats IIa extension Facility Windy Flats IIa extension Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner Cannon Power Group Developer Cannon Power Group Location North shore of Columbia River Coordinates 45.699622°, -120.774622° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":45.699622,"lon":-120.774622,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

183

Shepherds Flat North | Open Energy Information  

Open Energy Info (EERE)

North North Jump to: navigation, search Name Shepherds Flat North Facility Shepherds Flat North Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner Caithness Developer Caithness Energy Purchaser Southern California Edison Co Location Gilliam County OR Coordinates 45.73°, -120.056° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":45.73,"lon":-120.056,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

184

History of Rocky Flats waste streams  

SciTech Connect

An analysis of the waste streams at Rocky Flats was done to provide information for the Waste Certification program. This program has involved studying the types and amounts of retrievable transuranic (TRU) waste from Rocky Flats that is stored at the Idaho National Engineering Laboratory (INEL). The information can be used to estimate the types and amounts of waste that will need to be permanently stored in the Waste Isolation Pilot Plant (WIPP). The study covered mostly the eight-year period from June 1971 to June 1979. The types, amounts, and plutonium content of TRU waste and the areas or operations responsible for generating the waste are summarized in this waste stream history report. From the period studied, a total of 24,546,153 lbs of waste containing 211,148 g of plutonium currently occupies 709,497 cu ft of storage space at INEL.

Luckett, L.L.; Dickman, A.A.; Wells, C.R.; Vickery, D.J.

1982-03-10T23:59:59.000Z

185

Emergent universe in spatially flat cosmological model  

E-Print Network (OSTI)

The scenario of an emergent universe provides a promising resolution to the big bang singularity in universes with positive or negative spatial curvature. It however remains unclear whether the scenario can be successfully implemented in a spatially flat universe which seems to be favored by present cosmological observations. In this paper, we study the stability of Einstein static state solutions in a spatially flat Shtanov-Sahni braneworld scenario. With a negative dark radiation term included and assuming a scalar field as the only matter energy component, we find that the universe can stay at an Einstein static state past eternally and then evolve to an inflation phase naturally as the scalar field climbs up its potential slowly. In addition, we also propose a concrete potential of the scalar field that realizes this scenario.

Kaituo Zhang; Puxun Wu; Hongwei Yu

2013-11-16T23:59:59.000Z

186

Shepherds Flat South | Open Energy Information  

Open Energy Info (EERE)

South South Jump to: navigation, search Name Shepherds Flat South Facility Shepherds Flat South Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner Caithness Developer Caithness Energy Purchaser Southern California Edison Co Location Ione OR Coordinates 45.655°, -120.056° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":45.655,"lon":-120.056,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

187

Status Update: Closing Rocky Flats by 2006  

SciTech Connect

Safely closing Rocky Flats by December 2006 is a goal shared by many: the State of Colorado, the communities surrounding the site, the U.S. Congress, the Department of Energy (DOE), Kaiser-Hill and its team of subcontractors, the site's employees and taxpayers across the country. This paper will: provide a status of the Closure Project to date; describe important accomplishments of the past year; describe some of the closure-enhancing technologies enabling acceleration; and discuss the remaining challenges ahead.

Tuor, N.; Schubert, A.

2003-02-25T23:59:59.000Z

188

SunShot Initiative: Innovative Ballasted Flat Roof Solar Photovoltaic  

NLE Websites -- All DOE Office Websites (Extended Search)

Innovative Ballasted Flat Roof Innovative Ballasted Flat Roof Solar Photovoltaic Racking System to someone by E-mail Share SunShot Initiative: Innovative Ballasted Flat Roof Solar Photovoltaic Racking System on Facebook Tweet about SunShot Initiative: Innovative Ballasted Flat Roof Solar Photovoltaic Racking System on Twitter Bookmark SunShot Initiative: Innovative Ballasted Flat Roof Solar Photovoltaic Racking System on Google Bookmark SunShot Initiative: Innovative Ballasted Flat Roof Solar Photovoltaic Racking System on Delicious Rank SunShot Initiative: Innovative Ballasted Flat Roof Solar Photovoltaic Racking System on Digg Find More places to share SunShot Initiative: Innovative Ballasted Flat Roof Solar Photovoltaic Racking System on AddThis.com... Concentrating Solar Power Photovoltaics

189

DOE - Office of Legacy Management -- Rocky Flats Regulatory Documents  

NLE Websites -- All DOE Office Websites (Extended Search)

Regulatory Documents Regulatory Documents Rocky Flats Site, Colorado Regulatory Documents All documents are Adobe Acrobat files. pdf_icon Notification that GS01 is no longer an RFLMA Point of Compliance (POC) Third Five-Year Review Report for the Rocky Flats Site Rocky Flats Legacy Management Agreement Environmental Covenant, November 14, 2011 Corrective Action Decision/Record of Decision Amendment for Rocky Flats Plant (USDOE) Central Operable Unit Proposed Plan for the Rocky Flats CAD/ROD Amendment (June 2011) Second Five-Year Review Report for the Rocky Flats Site Corrective Action Decision/Record of Decision for Rocky Flats Plant (USDOE) Peripheral Operable Unit and Central Operable Unit Rocky Flats Environmental Technology Site Proposed Plan Present Landfill Monitoring and Maintenance Plan

190

Flat-Plate Photovoltaic Modules | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Modules Flat-Plate Photovoltaic Modules August 20, 2013 - 4:25pm Addthis Flat-plate photovoltaic (PV) modules are made of several components, including the front surface materials,...

191

Report on Matters Identified at the Rocky Flats Field Office...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Rocky Flats Field Office During the Audit of the Department's Consolidated Fiscal Year 1996 Financial Statements, WR-FS-97-03 Report on Matters Identified at the Rocky Flats Field...

192

SLIDESHOW: Shepherds Flat Wind Farm | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Flat Wind Farm SLIDESHOW: Shepherds Flat Wind Farm Addthis 1 of 5 Image: Caithness Energy 1 of 5 Image: Caithness Energy 2 of 5 Image: Caithness Energy 3 of 5 Image: Caithness...

193

Big Flat Electric Coop Inc | Open Energy Information  

Open Energy Info (EERE)

Facebook icon Twitter icon Big Flat Electric Coop Inc Jump to: navigation, search Name Big Flat Electric Coop Inc Place Montana Utility Id 1671 Utility Location Yes Ownership C...

194

Laser glazing of flat steel surface - The NE Multimedia Collection  

NLE Websites -- All DOE Office Websites (Extended Search)

flat steel surface Laser glazing of flat surface of steel parts is shown in the movie clip by moving the required beam over the surface at a constant speed...

195

Report of the Federal Internetworking Requirements Panel  

SciTech Connect

The Federal Internetworking Requirements Panel (FIRP) was established by the National Institute of Standards and Technology (NIST) to reassess Federal requirements for open systems networks and to recommend policy on the Government`s use of networking standards. The Panel was chartered to recommend actions which the Federal Government can take to address the short and long-term issues of interworking and convergence of networking protocols--particularly the Internet Protocol Suite (IPS) and Open Systems Interconnection (OSI) protocol suite and, when appropriate, proprietary protocols. The Panel was created at the request of the Office of Management and Budget in collaboration with the Federal Networking Council and the Federal Information Resources Management Policy Council. The Panel`s membership and charter are contained in an appendix to this report.

1994-05-31T23:59:59.000Z

196

Thin film photovoltaic panel and method  

DOE Patents (OSTI)

A thin film photovoltaic panel includes a backcap for protecting the active components of the photovoltaic cells from adverse environmental elements. A spacing between the backcap and a top electrode layer is preferably filled with a desiccant to further reduce water vapor contamination of the environment surrounding the photovoltaic cells. The contamination of the spacing between the backcap and the cells may be further reduced by passing a selected gas through the spacing subsequent to sealing the backcap to the base of the photovoltaic panels, and once purged this spacing may be filled with an inert gas. The techniques of the present invention are preferably applied to thin film photovoltaic panels each formed from a plurality of photovoltaic cells arranged on a vitreous substrate. The stability of photovoltaic conversion efficiency remains relatively high during the life of the photovoltaic panel, and the cost of manufacturing highly efficient panels with such improved stability is significantly reduced.

Ackerman, Bruce (El Paso, TX); Albright, Scot P. (El Paso, TX); Jordan, John F. (El Paso, TX)

1991-06-11T23:59:59.000Z

197

Call for Projects | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Services » Project Assistance » Call for Projects Services » Project Assistance » Call for Projects Call for Projects October 7, 2013 - 3:49pm Addthis The Federal Energy Management Program (FEMP) issues calls for projects surrounding energy efficiency, renewable energy, and water conservation. On November 5, 2013, FEMP issued a Funding Opportunity Announcement (FOA) on EERE Exchange titled "Assisting Federal Facilities with Energy Conservation Technologies (AFFECT)" DE-FOA-0000901. The release of the FOA follows the July 9, 2013, issuance of a notice of intent. AFFECT will provide grants for the development of capital projects to increase the energy efficiency and renewable energy investments at Federal agency facilities. Key Details Up to $5 million in direct funding will be provided for combined

198

Sustainability Assistance Network (SAN), Monthly Conference Call...  

NLE Websites -- All DOE Office Websites (Extended Search)

Sustainability Assistance Network (SAN) Monthly Conference Call Thursday, June 16, 2011 11:00 am - 12:30 pm (EST) Dial-in U.S. Toll: 303-248-0285 Access Code: 5863657 Web Login...

199

Sustainability Assistance Network (SAN), Monthly Conference Call...  

NLE Websites -- All DOE Office Websites (Extended Search)

Sustainability Assistance Network (SAN) Monthly Conference Call Thursday, August 16, 2012 11:00 am - 12:30 pm (ET) Dial-in U.S. Toll: 303-248-0285 Access Code: 5863657 Web Login...

200

Sustainability Assistance Network (SAN) Monthly Conference Call...  

NLE Websites -- All DOE Office Websites (Extended Search)

Sustainability Assistance Network (SAN) Monthly Conference Call Thursday, April 26, 2012 11:00 am - 12:30 pm (ET) Dial-in U.S. Toll: 303-248-0285 Access Code: 5863657 Web Login...

Note: This page contains sample records for the topic "flat panel called" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Sustainability Assistance Network (SAN), Monthly Conference Call...  

NLE Websites -- All DOE Office Websites (Extended Search)

Sustainability Assistance Network (SAN) Monthly Conference Call Thursday, August 18, 2011 11:00 am - 12:30 pm (EST) Dial-in U.S. Toll: 303-248-0285 Access Code: 5863657 Web Login...

202

Sustainability Assistance Network (SAN), Monthly Conference Call...  

NLE Websites -- All DOE Office Websites (Extended Search)

Sustainability Assistance Network (SAN) Monthly Conference Call Thursday, November 17, 2011 11:00 am - 12:30 pm (EST) Dial-in U.S. Toll: 303-248-0285 Access Code: 5863657 Web Login...

203

Sustainability Assistance Network (SAN), Monthly Conference Call...  

NLE Websites -- All DOE Office Websites (Extended Search)

Sustainability Assistance Network (SAN) Monthly Conference Call Thursday, September 20, 2012 11:00 am - 12:30 pm (ET) Dial-in U.S. Toll: 303-248-0285 Access Code: 5863657 Web Login...

204

Sustainability Assistance Network (SAN), Monthly Conference Call...  

NLE Websites -- All DOE Office Websites (Extended Search)

Sustainability Assistance Network (SAN) Monthly Conference Call Thursday, November 15, 2012 11:00 am - 12:30 pm (ET) Dial-in U.S. Toll: 303-248-0285 Access Code: 5863657 Web Login...

205

Sustainability Assistance Network (SAN), Monthly Conference Call...  

NLE Websites -- All DOE Office Websites (Extended Search)

Sustainability Assistance Network (SAN) Monthly Conference Call Thursday, July 19, 2012 11:00 am - 12:30 pm (ET) Dial-in U.S. Toll: 303-248-0285 Access Code: 5863657 Web Login...

206

Sustainability Assistance Network (SAN), Monthly Conference Call...  

NLE Websites -- All DOE Office Websites (Extended Search)

Sustainability Assistance Network (SAN) Monthly Conference Call Thursday, October 20, 2011 11:00 am - 12:30 pm (EST) Dial-in U.S. Toll: 303-248-0285 Access Code: 5863657 Web Login...

207

Sustainability Assistance Network (SAN), Monthly Conference Call...  

NLE Websites -- All DOE Office Websites (Extended Search)

Sustainability Assistance Network (SAN) Monthly Conference Call Thursday, June 21, 2012 11:00 am - 12:30 pm (ET) Dial-in U.S. Toll: 303-248-0285 Access Code: 5863657 Web Login...

208

Sustainability Assistance Network (SAN), Monthly Conference Call...  

NLE Websites -- All DOE Office Websites (Extended Search)

Sustainability Assistance Network (SAN) Monthly Conference Call Thursday, September 15, 2011 11:00 am - 12:30 pm (EST) Dial-in U.S. Toll: 303-248-0285 Access Code: 5863657 Web...

209

Sustainability Assistance Network (SAN), Monthly Conference Call...  

NLE Websites -- All DOE Office Websites (Extended Search)

Sustainability Assistance Network (SAN) Monthly Conference Call Thursday, December 20, 2012 11:00 am - 12:30 pm (ET) Dial-in U.S. Toll: 303-248-0285 Access Code: 5863657 Web Login...

210

Sustainability Assistance Network (SAN), Monthly Conference Call...  

NLE Websites -- All DOE Office Websites (Extended Search)

Sustainability Assistance Network (SAN) Monthly Conference Call Thursday, June 20, 2013 11:00 am - 12:30 pm (ET) Dial-in U.S. Toll: 303-248-0285 Access Code: 5863657 Web Login:...

211

Sustainability Assistance Network (SAN), Monthly Conference Call...  

NLE Websites -- All DOE Office Websites (Extended Search)

Sustainability Assistance Network (SAN) Monthly Conference Call Thursday, December 15, 2011 11:00 am - 12:30 pm (EST) Dial-in U.S. Toll: 303-248-0285 Access Code: 5863657 Web Login...

212

2008 Environmental Sustainability Network Conference Call Notes  

NLE Websites -- All DOE Office Websites (Extended Search)

Page 1 of 5 DOE Environmental Sustainability Network (ESN) January 2008 Conference Call 17 January 2008 1. DOE Order 450.1A Update - Jane Powers, 202 586 7301,...

213

Sustainability Assistance Network (SAN) Monthly Conference Call...  

NLE Websites -- All DOE Office Websites (Extended Search)

Sustainability Assistance Network (SAN) Monthly Conference Call Thursday, March 15, 2012 11:00 am - 12:30 pm (EST) Dial-in U.S. Toll: 303-248-0285 Access Code: 5863657 Web Login...

214

Sustainability Assistance Network (SAN), Monthly Conference Call...  

NLE Websites -- All DOE Office Websites (Extended Search)

Sustainability Assistance Network (SAN) Monthly Conference Call Thursday, May 16, 2013 11:00 am - 12:30 pm (ET) Dial-in U.S. Toll: 303-248-0285 Access Code: 5863657 Web Login...

215

Sustainability Assistance Network (SAN), Monthly Conference Call...  

NLE Websites -- All DOE Office Websites (Extended Search)

Sustainability Assistance Network (SAN) Monthly Conference Call Thursday, October 18, 2012 11:00 am - 12:30 pm (ET) Dial-in U.S. Toll: 303-248-0285 Access Code: 5863657 Web Login...

216

Sustainability Assistance Network (SAN), Monthly Conference Call...  

NLE Websites -- All DOE Office Websites (Extended Search)

Sustainability Assistance Network (SAN) Monthly Conference Call Thursday, February 21, 2013 11:00 am - 12:30 pm (ET) Dial-in U.S. Toll: 303-248-0285 Access Code: 5863657 Web Login...

217

Event:CLEAN call | Open Energy Information  

Open Energy Info (EERE)

to discuss core projects and to provide updates on LEDS activities for the CLEAN inventory. Event Details Name CLEAN call Date 20110412 Time 15:00-17:00 CET Location...

218

Microsoft Word - Call_for_Proposals.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

The University of Chicago The University of Chicago ATLAS Call for Proposals Deadline for proposals: Monday, October 28, 2013 Dear ATLAS User, This is a call for proposals for experiments at ATLAS, for the scheduling period beginning in January 2014. The ATLAS Program Advisory Committee (PAC) meeting will be held November 22-23, 2013. Please note that this is a call for proposals for all experiments using stable beams, radioactive beams produced by the in-flight technique, and low-energy and reaccelerated radioactive beams from the CARIBU source. This is also the first call for proposals for experiments with the GRETINA gamma-ray tracking array that will be operational at ATLAS from January 2014 to December 2014. GRETINA operation at ATLAS is expected to be split into two campaigns. GRETINA's first campaign at ATLAS will have it sited on the

219

Novel Metamaterial 'Flat Lens' Creates 3D Images in Free ...  

Science Conference Proceedings (OSTI)

Novel Metamaterial 'Flat Lens' Creates 3D Images in Free Space. From NIST Tech Beat: May 28, 2013. ...

2013-05-29T23:59:59.000Z

220

Secretaries Chu and Donovan to Host Conference Call on Home Owners  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Donovan to Host Conference Call on Home Owners Donovan to Host Conference Call on Home Owners Energy-Saving Improvements Program Secretaries Chu and Donovan to Host Conference Call on Home Owners Energy-Saving Improvements Program April 20, 2011 - 12:00am Addthis WASHINGTON - Thursday, April 21st, U.S. Department of Energy Secretary Steven Chu and U.S. Housing and Urban Development Secretary Shaun Donovan will launch a new pilot program intended to offer homeowners low-cost financing to help make their homes more energy efficient. The Federal Housing Administration's (FHA) new PowerSaver Program will offer homeowners up to $25,000 to finance the installation of insulation, duct sealing, replacement doors and windows, HVAC systems, water heaters, solar panels, and geothermal systems. Donovan and Chu will speak with reporters following a tour of a local

Note: This page contains sample records for the topic "flat panel called" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Briefing package for the Yucca Flat pre-emptive review, including overview, UZ model, SZ volcanics model and summary and conclusions sections  

Science Conference Proceedings (OSTI)

Much progress has been made in the last several years in modeling radionuclide transport from tests conducted both in the unsaturated zone and saturated volcanic rocks of Yucca Flat, Nevada. The presentations to the DOE NNSA pre-emptive review panel contained herein document the progress to date, and discuss preliminary conclusions regarding the present and future extents of contamination resulting from past nuclear tests. The presentations also discuss possible strategies for addressing uncertainty in the model results.

Kwicklis, Edward Michael [Los Alamos National Laboratory; Keating, Elizabeth H [Los Alamos National Laboratory

2010-12-02T23:59:59.000Z

222

Structural Analysis of Sandwich Foam Panels  

SciTech Connect

The Sandwich Panel Technologies including Structural Insulated Panels (SIPs) can be used to replace the conventional wooden-frame construction method. The main purpose of this Cooperative Research and Development Agreement (CRADA) between UT-Battelle, LLC and SGI Venture, Inc. was to design a novel high R-value type of metal sandwich panelized technology. This CRADA project report presents design concept discussion and numerical analysis results from thermal performance study of this new building envelope system. The main objective of this work was to develop a basic concept of a new generation of wall panel technologies which will have R-value over R-20 will use thermal mass to improve energy performance in cooling dominated climates and will be 100% termite resistant. The main advantages of using sandwich panels are as follows: (1) better energy saving structural panels with high and uniform overall wall R-value across the elevation that could not be achieved in traditional walls; and (2) reducing the use of raw materials or need for virgin lumber. For better utilization of these Sandwich panels, engineers need to have a thorough understanding of the actual performance of the panels and system. Detailed analysis and study on the capacities and deformation of individual panels and its assembly have to be performed to achieve that goal. The major project activity was to conduct structural analysis of the stresses, strains, load capacities, and deformations of individual sandwich components under various load cases. The analysis simulated the actual loading conditions of the regular residential building and used actual material properties of the steel facings and foam.

Kosny, Jan [ORNL; Huo, X. Sharon [Tennessee Technological University

2010-04-01T23:59:59.000Z

223

Recommendations of the industry advisory panel on geothermal reservoir definition  

DOE Green Energy (OSTI)

The objectives of the August 1984 meeting of the advisory panel are listed. The panel's comments on DOE's Geothermal Program and industry's needs and priorities are presented. (MHR)

Gulati, M.S.; Lippmann, M.J.

1985-01-01T23:59:59.000Z

224

Performance Standard for Wood-Based Structural-Use Panels  

Science Conference Proceedings (OSTI)

... except that Structural I panels meet additional requirements in this Standard for cross-panel strength and stiffness and for racking load performance ...

2011-06-10T23:59:59.000Z

225

Calling patterns in human communication dynamics  

E-Print Network (OSTI)

Modern technologies not only provide a variety of communication modes, e.g., texting, cellphone conversation, and online instant messaging, but they also provide detailed electronic traces of these communications between individuals. These electronic traces indicate that the interactions occur in temporal bursts. Here, we study the inter-call durations of the 100,000 most-active cellphone users of a Chinese mobile phone operator. We confirm that the inter-call durations follow a power-law distribution with an exponential cutoff at the population level but find differences when focusing on individual users. We apply statistical tests at the individual level and find that the inter-call durations follow a power-law distribution for only 3460 individuals (3.46%). The inter-call durations for the majority (73.34%) follow a Weibull distribution. We quantify individual users using three measures: out-degree, percentage of outgoing calls, and communication diversity. We find that the cellphone users with a power-law...

Jiang, Zhi-Qiang; Li, Ming-Xia; Podobnik, Boris; Zhou, Wei-Xing; Stanley, H Eugene; 10.1073/pnas.1220433110

2013-01-01T23:59:59.000Z

226

Innovative Solar Panel Maker Scales Up, Lowering Costs while Creating Jobs  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Innovative Solar Panel Maker Scales Up, Lowering Costs while Innovative Solar Panel Maker Scales Up, Lowering Costs while Creating Jobs Innovative Solar Panel Maker Scales Up, Lowering Costs while Creating Jobs May 16, 2011 - 12:41pm Addthis The end of Abound Solar’s PV manufacturing line | Photo Courtesy of Abound Solar The end of Abound Solar's PV manufacturing line | Photo Courtesy of Abound Solar Minh Le Minh Le Program Manager, Solar Program It's one thing to call solar energy a "growth industry," it's quite another to witness firsthand how quickly a company on the cutting edge of that industry can grow -- all the while growing jobs right here in America. The Department's Photovoltaic (PV) Technology Incubator program has brought me in contact with a number of dynamic solar startups that fit that mold. I

227

Ultrafast thermal cycling of solar panels  

SciTech Connect

Two new cyclers that utilize a novel hybrid approach to perform fast thermal cycling of solar panels have been built and are now operational in the Mechanics and Materials Technology Center at The Aerospace Corporation. These cyclers are part of a continuing effort to minimize solar cell life test durations by accelerating the cycling rates. These fully automated cyclers, which provide continuous unmanned cycling in a gaseous nitrogen atmosphere, can execute 5 min cycles, thus yielding in excess of 100,000 cycles per year. They also have a unique capability of verifying solar panel functionality without interruption of cycling, so that cycling doesn`t continue on nonfunctioning panels.

Wall, T.S.; Valenzuela, P.R.; Sue, C.

1998-08-15T23:59:59.000Z

228

EM SSAB Chairs Conference Calls | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SSAB Chairs Conference Calls EM SSAB Chairs Conference Calls June 18, 2013 EM SSAB Conference Calls - June 18, 2013 Minutes and highlights of the Environmental Management (EM) Site...

229

EM SSAB Chairs Conference Calls | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Communication & Engagement EM SSAB EM SSAB Chairs Conference Calls EM SSAB Chairs Conference Calls October 25, 2007 EM SSAB Conference Calls - October 25, 2007 Special...

230

DOE - Office of Legacy Management -- Rocky Flats SOG  

NLE Websites -- All DOE Office Websites (Extended Search)

SOG SOG Rocky Flats Site, Colorado Rocky Flats, Colorado, Site Operations Guide All documents are Adobe Acrobat files. pdf_icon Site Operations Guide Appendixes Appendix A: Annual Site Inspection Checklist Appendix B: Example Contact Record Appendix C: Rocky Flats Site Soil Disturbance Evaluation Procedure Appendix D: Site-Specific Checklist Appendix E: Rocky Flats, Colorado, Site Erosion Control Monitoring and Maintenance Inspection Procedure Appendix F: Erosion Control Plan for Rocky Flats Property Central Operable Unit Appendix G: Wildland Fire Management Plan for the Rocky Flats, Colorado, Site Appendix H: Emergency Response Plan for the Rocky Flats Site Dams Appendix I: Additional Field Implementation Detail for Selected Monitoring Objectives Historic documents may contain links to outside sources. LM cannot attest

231

Independent Oversight Special Review, Rocky Flats Closure Project Site -  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Oversight Special Review, Rocky Flats Closure Project Oversight Special Review, Rocky Flats Closure Project Site - April 2001 Independent Oversight Special Review, Rocky Flats Closure Project Site - April 2001 April 2001 Special Review of the Rocky Flats Closure Project Site The U.S. Department of Energy (DOE) Office of Independent Environment, Safety, and Health Oversight (EH-2), within the Office of Environment, Safety and Health, conducted an independent oversight Special Review at the Rocky Flats Closure Project (RFCP). The Special Review was conducted at the request of the Rocky Flats Field Office (RFFO), which is the DOE organizational element with responsibility for the RFCP (formerly known as the Rocky Flats Environmental Technology Site). Kaiser-Hill Company, LLC (KH) is the prime contractor for the RFCP.

232

Independent Oversight Special Review, Rocky Flats Closure Project Site -  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Special Review, Rocky Flats Closure Project Special Review, Rocky Flats Closure Project Site - April 2001 Independent Oversight Special Review, Rocky Flats Closure Project Site - April 2001 April 2001 Special Review of the Rocky Flats Closure Project Site The U.S. Department of Energy (DOE) Office of Independent Environment, Safety, and Health Oversight (EH-2), within the Office of Environment, Safety and Health, conducted an independent oversight Special Review at the Rocky Flats Closure Project (RFCP). The Special Review was conducted at the request of the Rocky Flats Field Office (RFFO), which is the DOE organizational element with responsibility for the RFCP (formerly known as the Rocky Flats Environmental Technology Site). Kaiser-Hill Company, LLC (KH) is the prime contractor for the RFCP. RFCP's project-oriented approach and aggressive scheduling have resulted

233

Last Call for Questions | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Last Call for Questions Last Call for Questions Last Call for Questions October 7, 2010 - 5:06pm Addthis Sec. Chu observes as workers demonstrate energy efficient water heaters. | Department of Energy Photo | Courtesy of National Renewable Energy Laboratory | Sec. Chu observes as workers demonstrate energy efficient water heaters. | Department of Energy Photo | Courtesy of National Renewable Energy Laboratory | John Schueler John Schueler Former New Media Specialist, Office of Public Affairs Just a quick reminder that the deadline for submitting your home energy efficiency questions directly to Secretary Chu is midnight tonight (10/07). We've already received some great queries and personal experiences but want to make sure the Secretary has a chance to respond to as many of you

234

Data Call - Food Community | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Data Call - Food Community Data Call - Food Community Agriculture Community Menu DATA APPS EVENTS DEVELOPER STATISTICS COLLABORATE ABOUT Agriculture You are here Data.gov » Communities » Agriculture Data Call Understanding food, agriculture, and rural issues is a multidisciplinary effort that incorporates natural resources and land use, biological and physical sciences, international commodity and financial market information, social sciences, human health and nutrition, and many other areas. Relevant data collection and compilation of official statistics occur throughout the U.S. government, not just in agencies with an explicit focus on agriculture. With so many different sources of knowledge and widely felt areas of impact, successful data integration and distribution requires making full use of new approaches and technologies.

235

Calling All Fuel Cells | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Calling All Fuel Cells Calling All Fuel Cells Calling All Fuel Cells December 7, 2012 - 4:31pm Addthis Altergy had more than 60 fuel cells in the immediate Hurricane Sandy disaster area that acted as backup power for cell phone towers. | Photo courtesy of Altergy. Altergy had more than 60 fuel cells in the immediate Hurricane Sandy disaster area that acted as backup power for cell phone towers. | Photo courtesy of Altergy. Sunita Satyapal Program Manager, Hydrogen & Fuel Cell Technology Program What is a fuel cell? A fuel cell is a device that uses a fuel and oxygen to create electricity by an electrochemical process. A fuel cell can provide energy for systems as large as a utility power station and as small as a laptop computer. During Hurricane Sandy, fuel cells were instrumental in providing backup

236

Calling All Fuel Cells | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Calling All Fuel Cells Calling All Fuel Cells Calling All Fuel Cells December 7, 2012 - 4:31pm Addthis Altergy had more than 60 fuel cells in the immediate Hurricane Sandy disaster area that acted as backup power for cell phone towers. | Photo courtesy of Altergy. Altergy had more than 60 fuel cells in the immediate Hurricane Sandy disaster area that acted as backup power for cell phone towers. | Photo courtesy of Altergy. Sunita Satyapal Program Manager, Hydrogen & Fuel Cell Technology Program What is a fuel cell? A fuel cell is a device that uses a fuel and oxygen to create electricity by an electrochemical process. A fuel cell can provide energy for systems as large as a utility power station and as small as a laptop computer. During Hurricane Sandy, fuel cells were instrumental in providing backup

237

Energy Conservation in Flat FRW Cosmology  

E-Print Network (OSTI)

The consequence of energy conservation in the flat Friedmannn-Robertson-Walker (FRW) cosmology is a strictly positive accelerating expansion. A mechanism is proposed for this expansion due to the effect of the attractive (negative) gravitational potential of matter as it is being included within the expanding horizon, and the offsetting work of metric expansion, which takes place at sub-luminal speed. In our semi-classical treatment, we deal with a quintic as the equation for the scale parameter. Implications for modeling the earliest parts of the primordial expansion are discussed.

Steven Maxson

2009-01-07T23:59:59.000Z

238

Repackaging Rocky Flats Legacy Transuranic Waste  

Science Conference Proceedings (OSTI)

Repackaging legacy Transuranic (TRU), Transuranic Mixed (TRM), Low Level Waste (LLW), and Low Level Mixed (LLM) waste requires good characterization skills and the ability to adapt to less than ideal conditions. Repackaging legacy waste in a facility that is not undergoing Decontamination and Decommission (D and D) is optimum. However, repackaging any waste in a D and D facility, under cold and dark conditions, can be difficult. Cold and dark conditions are when the heating and air conditioning are no longer in service and the lighting consists of strands of lights hung throughout each of the rooms. Working under these conditions adds an additional level of stress and danger that must be addressed. The use of glovebags was very useful at Rocky Flats during the D and D of many buildings. Glovebags can be adapted for many different types of wastes and unusual conditions. Repackaging of legacy TRU waste, in a D and D facility, can be accomplished safely and cost effectively with the use of glovebags. In conclusion: the use of glovebags to repackage legacy TRU, TRM, LLW, or LLM waste was done safely and cost effectively at Rocky Flats. The cost of using glovebags was minimal. Glovebags are easily adaptable to whatever the waste configuration is. The use of glovebags, for repackaging of Legacy waste, allows D and D efforts to stay on schedule and on task. Without the use of glovebags, additional gloveboxes would have been required at Rocky Flats. Larger items, such as the HEPA filters, would have required the construction of a new large item repackaging glovebox. Repackaging in glovebags allows the freedom to either locate the glovebag by the waste or locate the glovebag in a place that least impacts D and D efforts. The use of glovebags allowed numerous configurations of waste to be repackaged without the use of gloveboxes. During the D and D of the Rocky Flats facility, which was in a cold and dark stage, D and D work was not impacted by the repackaging activity. Glovebags work well in facilities that are in the process of D and D or still in full operations because glovebags are very safe and cost effective.

McTaggart, Jerri Lynne [Los Alamos National Laboratory, 115 N. Main St., Carlsbad, New Mexico, 88220 (United States)

2008-01-15T23:59:59.000Z

239

Panel on future challenges in modeling methodology  

Science Conference Proceedings (OSTI)

This panel paper presents the views of six researchers and practitioners of simulation modeling. Collectively we attempt to address a range of key future challenges to modeling methodology. It is hoped that the views of this paper, and the presentations ...

Simon J. E. Taylor; Peter Lendermann; Ray J. Paul; Steven W. Reichenthal; Steffen Straßburger; Stephen J. Turner

2004-12-01T23:59:59.000Z

240

Plasma panel-based radiation detectors  

E-Print Network (OSTI)

The plasma panel sensor (PPS) is a gaseous micropattern radiation detector under current development. It has many operational and fabrication principles common to plasma display panels. It comprises a dense matrix of small, gas plasma discharge cells within a hermetically sealed panel. As in plasma display panels, it uses nonreactive, intrinsically radiation-hard materials such as glass substrates, refractory metal electrodes, and mostly inert gas mixtures. We are developing these devices primarily as thin, low-mass detectors with gas gaps from a few hundred microns to a few millimeters. The PPS is a high gain, inherently digital device with the potential for fast response times, fine position resolution (cost. In this paper, we report on prototype PPS experimental results in detecting betas, protons, and cosmic muons, and we extrapolate on the PPS potential for applications including the detection of alphas, heavy ions at low-to-medium energy, thermal neutrons, and X-rays.

Peter Friedman; Robert Ball; James Beene; Yan Benhammou; Meny Ben-Moshe; Hassan Bentefour; J. W. Chapman; Erez Etzion; Claudio Ferretti; Daniel Levin; Yiftah Silver; Robert Varner; Curtis Weaverdyck; Bing Zhou

2013-05-10T23:59:59.000Z

Note: This page contains sample records for the topic "flat panel called" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Panels with Nonstationary Multifactor Error Structures  

E-Print Network (OSTI)

panel regressions with multifactor error structure. This paper extends this work and examines the important case where the unobserved common factors follow unit root processes and could be cointegrated. It is found that the presence of unit roots does...

Kapetanios, George; Pesaran, M Hashem; Yamagata, Takashi

242

REPOSITORY RECONFIGURATION OF PANELS 9 AND 10  

NLE Websites -- All DOE Office Websites (Extended Search)

of the text that were changed are highlighted in yellow. 2-2: PMR Section A-4 Facility Type, Pages B-6 Provide redline strike out text revising sentence from "as Panels 1...

243

A security panel with a keypad  

DOE Patents (OSTI)

Several control panels presently use keypads to enter data. Sometimes panels require secure keypads in that they must prevent others nearby from seeing the information inputted by the keypad. The invention provides a secure keypad, which is easy to use by the user, yet is difficult for a nonuser to see. The invention places the keypad in a cavity, and provides an opening to allow access to the keypad and a window for viewing the keypad.

Banks, W.W. Jr.; Uhlig, F.

1988-09-27T23:59:59.000Z

244

CALL FOR PROPOSALS ATLANTIC BLUEFIN TUNA RESEARCH  

E-Print Network (OSTI)

1 CALL FOR PROPOSALS ATLANTIC BLUEFIN TUNA RESEARCH JUNE 29, 2010 EXECUTIVE SUMMARY Funding Opportunity Description: Northern bluefin tuna Thunnus thynnus is the object of a major international fishery. Effective fisheries management will depend upon improvements in understanding of bluefin tuna biology

Berkson, Jim

245

Improved call graph comparison using simulated annealing  

Science Conference Proceedings (OSTI)

The amount of suspicious binary executables submitted to Anti-Virus (AV) companies are in the order of tens of thousands per day. Current hash-based signature methods are easy to deceive and are inefficient for identifying known malware that have undergone ... Keywords: call graph, graph edit distance, malware, simulated annealing, static analysis

Orestis Kostakis; Joris Kinable; Hamed Mahmoudi; Kimmo Mustonen

2011-03-01T23:59:59.000Z

246

Easy system call tracing for Plan 9.  

SciTech Connect

Tracing system calls makes debugging easy and fast. On Plan 9, traditionally, system call tracing has been implemented with acid. New systems do not always implement all the capabilities needed for Acid, particularly the ability to rewrite the process code space to insert breakpoints. Architecture support libraries are not always available for Acid, or may not work even on a supported architecture. The requirement that Acid's libraries be available can be a problem on systems with a very small memory footprint, such as High Performance Computing systems where every Kbyte counts. Finally, Acid tracing is inconvenient in the presence of forks, which means tracing shell pipelines is particularly troublesome. The strace program available on most Unix systems is far more convenient to use and more capable than Acid for system call tracing. A similar system on Plan 9 can simplify troubleshooting. We have built a system calling tracing capability into the Plan 9 kernel. It has proven to be more convenient than strace in programming effort. One can write a shell script to implement tracing, and the C code to implement an strace equivalent is several orders of magnitude smaller.

Minnich, Ronald G.

2010-09-01T23:59:59.000Z

247

Disposal of Rocky Flats residues as waste  

SciTech Connect

Work is underway at the Rocky Flats Plant to evaluate alternatives for the removal of a large inventory of plutonium-contaminated residues from the plant. One alternative under consideration is to package the residues as transuranic wastes for ultimate shipment to the Waste Isolation Pilot Plant. Current waste acceptance criteria and transportation regulations require that approximately 1000 cubic yards of residues be repackaged to produce over 20,000 cubic yards of WIPP certified waste. The major regulatory drivers leading to this increase in waste volume are the fissile gram equivalent, surface radiation dose rate, and thermal power limits. In the interest of waste minimization, analyses have been conducted to determine, for each residue type, the controlling criterion leading to the volume increase, the impact of relaxing that criterion on subsequent waste volume, and the means by which rules changes may be implemented. The results of this study have identified the most appropriate changes to be proposed in regulatory requirements in order to minimize the costs of disposing of Rocky Flats residues as transuranic wastes.

Dustin, D.F.; Sendelweck, V.S. [EG and G Rocky Flats, Inc., Golden, CO (United States). Rocky Flats Plant; Rivera, M.A. [Lamb Associates, Inc., Rockville, MD (United States)

1993-03-01T23:59:59.000Z

248

Immobilization of Rocky Flats Graphite Fines Residues  

SciTech Connect

The Savannah River Technology Center (SRTC) is developing an immobilization process for graphite fines residues generated during nuclear materials production activities at the Rocky Flats Environmental Technology Site (Rocky Flats). The continued storage of this material has been identified as an item of concern. The residue was generated during the cleaning of graphite casting molds and potentially contains reactive plutonium metal. The average residue composition is 73 wt percent graphite, 15 wt percent calcium fluoride (CaF2), and 12 wt percent plutonium oxide (PuO2). Approximately 950 kilograms of this material are currently stored at Rocky Flats. The strategy of the immobilization process is to microencapsulate the residue by mixing with a sodium borosilicate (NBS) glass frit and heating at nominally 700 degrees C. The resulting waste form would be sent to the Waste Isolation Pilot Plant (WIPP) for disposal. Since the PuO2 concentration in the residue averages 12 wt percent, the immobilization process was required to meet the intent of safeguards termination criteria by limiting plutonium recoverability based on a test developed by Rocky Flats. The test required a plutonium recovery of less than 4 g/kg of waste form when a sample was leached using a nitric acid/CaF2 dissolution flowsheet. Immobilization experiments were performed using simulated graphite fines with cerium oxide (CeO2) as a surrogate for PuO2 and with actual graphite fines residues. Small-scale surrogate experiments demonstrated that a 4:1 frit to residue ratio was adequate to prevent recovery of greater than 4 g/kg of cerium from simulated waste forms. Additional experiments investigated the impact of varying concentrations of CaF2 and the temperature/heating time cycle on the cerium recovery. Optimal processing conditions developed during these experiments were subsequently demonstrated at full-scale with surrogate materials and on a smaller scale using actual graphite fines.In general, the recovery of cerium from the full-scale waste forms was higher than for smaller scale experiments. The presence of CaF2 also caused a dramatic increase in cerium recovery not seen in the small-scale experiments. However, the results from experiments with actual graphite fines were encouraging. A 4:1 frit to residue ratio, a temperature of 700 degrees C, and a 2 hr heating time produced waste forms with plutonium recoveries of 4 plus/minus 1 g/kg. With an increase in the frit to residue ratio, waste forms fabricated at this scale should meet the Rocky Flats product specification. The scale-up of the waste form fabrication process to nominally 3 kg is expected to require a 5:1 to 6:1 frit to residue ratio and maintaining the waste form centerline temperature at 700 degrees C for 2 hr.

Rudisill, T. S.

1998-11-06T23:59:59.000Z

249

Bonded Bracket Assmebly for Frameless Solar Panels  

SciTech Connect

In February 2011 the US Department of Energy announced their new Sunshot Initiative. The Sunshot goal is to reduce the total cost of solar energy systems by about 75 percent before the end of the decade. The DOE estimated that a total installed cost of $1 per watt for photovoltaic systems would be equivalent to 6���¢/kilowatt hour (kWh) for energy available from the grid. The DOE also estimated that to meet the $1 per watt goal, PV module costs would need to be reduced to $.50 per watt, balance of systems costs would need to be reduced to $.40 per watt, and power electronic costs would need to reach $.10 per watt. To address the BOS balance of systems cost component of the $1 per watt goal, the DOE announced a funding opportunity called (BOS-X) Extreme Balance of System Hardware Cost Reductions. The DOE identified eight areas within the total BOS costs: 1) installation labor, 2) installation materials, 3) installation overhead and profit, 4) tracker, 5) permitting and commissioning, 6) site preparation, 7) land acquisition, 8) sales tax. The BOS-X funding announcement requested applications in four specific topics: Topic 1: Transformational Building Integrated Photovoltaic (BIPV) Modules Topic 2: Roof and Ground Mount Innovations Topic 3: Transformational Photovoltaic System Designs Topic 4: Development of New Wind Load Codes for PV Systems The application submitted by ARaymond Tinnerman reflected the requirements listed in Topic #2, Roof and Ground Mount Innovations. The goal of topic #2 was to develop technologies that would result in the extreme reduction of material and labor costs associated with applications that require physical connections and attachments to roof and ground mount structures. The topics researched in this project included component cost reduction, labor reduction, weight reduction, wiring innovations, and alternative material utilization. The project objectives included: 1) The development of an innovative quick snap bracket assembly that would be bonded to frameless PV modules for commercial rooftop installations. 2) The development of a composite pultruded rail to replace traditional racking materials. 3) In partnership with a roofing company, pilot the certification of a commercial roof to be solar panel compliant, eliminating the need for structural analysis and government oversight resulting in significantly decreased permitting costs. 4) Reduce the sum of all cost impacts in topic #2 from a baseline total of $2.05/watt to $.34/watt.

Murray, Todd

2013-01-30T23:59:59.000Z

250

Progressive collapse simulation of precast panel shear walls during earthquakes  

Science Conference Proceedings (OSTI)

A distinct element method (DEM) program is modified to model precast panel shear walls. The influence of collapse time t"0 of local failure of a panel is presented. Integrity analyses of a twelve-storey, three-bay precast panel shear wall in different ... Keywords: Concrete panels, Distinct element method, Earthquakes, Failure process simulation, Progressive collapse

O. A. Pekau; Yuzhu Cui

2006-01-01T23:59:59.000Z

251

Building Technologies Office: Vacuum Insulation Panels Research Project  

NLE Websites -- All DOE Office Websites (Extended Search)

Vacuum Insulation Vacuum Insulation Panels Research Project to someone by E-mail Share Building Technologies Office: Vacuum Insulation Panels Research Project on Facebook Tweet about Building Technologies Office: Vacuum Insulation Panels Research Project on Twitter Bookmark Building Technologies Office: Vacuum Insulation Panels Research Project on Google Bookmark Building Technologies Office: Vacuum Insulation Panels Research Project on Delicious Rank Building Technologies Office: Vacuum Insulation Panels Research Project on Digg Find More places to share Building Technologies Office: Vacuum Insulation Panels Research Project on AddThis.com... About Take Action to Save Energy Partner with DOE Activities Appliances Research Building Envelope Research Windows, Skylights, & Doors Research

252

Microsoft Word - Tracking Call _2_.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Tracking Sub-Group Call, Monday December 12, 2005, 11 a.m. eastern Tracking Sub-Group Call, Monday December 12, 2005, 11 a.m. eastern Participants: Bill Mackie (WGA), Sarah Wochos (CSG-MW), Michele Sampson (FRA) Participants discussed information to add to the group's working document and next steps for the discussion. It was mentioned that RW recently announced that the rail spur in Nevada would cost much more than originally planned, so the possibility of heavy-hauling is likely, at least initially until the spur is completed. In light of that, we need to consider technologies and policies for both truck and rail and for inter-modal transfers. People/sources to contact for lessons-learned and/or available technologies Bob Fronczak at AAR - as a starting point to involving the railroads. AAR likely has access to

253

DOE's Former Rocky Flats Weapons Production Site to Become National  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Former Rocky Flats Weapons Production Site to Become National Former Rocky Flats Weapons Production Site to Become National Wildlife Refuge DOE's Former Rocky Flats Weapons Production Site to Become National Wildlife Refuge July 12, 2007 - 2:54pm Addthis WASHINGTON, DC - The U.S. Department of Energy (DOE) today announced the transfer of nearly 4,000 acres of its former Rocky Flats nuclear weapons production site to the Department of the Interior's (DOI) U.S. Fish and Wildlife Service (FWS) for use as a National Wildlife Refuge. After more than a decade of environmental cleanup work, the transfer creates the Rocky Flats National Wildlife Refuge, 16 miles northwest of Denver, Colorado, and marks completion of the regulatory milestones to transform a formerly contaminated site into an environmental asset. "The Department of Energy's environmental cleanup of the Rocky Flats

254

Salt Wells, Eight Mile Flat | Open Energy Information  

Open Energy Info (EERE)

Salt Wells, Eight Mile Flat Salt Wells, Eight Mile Flat Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Salt Wells, Eight Mile Flat Abstract Abstract unavailable. Author Nevada Bureau of Mines and Geology Published Online Nevada Encyclopedia, 2009 DOI Not Provided Check for DOI availability: http://crossref.org Online Internet link for Salt Wells, Eight Mile Flat Citation Nevada Bureau of Mines and Geology. Salt Wells, Eight Mile Flat [Internet]. 2009. Online Nevada Encyclopedia. [updated 2009/03/24;cited 2013/08/07]. Available from: http://www.onlinenevada.org/articles/salt-wells-eight-mile-flat Related Geothermal Exploration Activities Activities (1) Areas (1) Regions (0) Development Wells At Salt Wells Area (Nevada Bureau of Mines and Geology, 2009) Salt Wells Geothermal Area

255

Sagebrush Flat Wildlife Area 2008 Annual Report.  

DOE Green Energy (OSTI)

The Sagebrush Flat Wildlife Area is a 12,718 acre complex located in Douglas County, Washington. Four distinct management units make up the area: Bridgeport, Chester Butte, Dormaier and Sagebrush Flat. The four Units are located across a wide geographic area within Douglas County. The Units are situated roughly along a north/south line from Bridgeport in the north to the Douglas/Grant county line in the south, 60 miles away. The wildlife area was established to conserve and enhance shrubsteppe habitat for the benefit shrubsteppe obligate and dependent wildlife species. In particular, the Sagebrush Flat Wildlife Area is managed to promote the recovery of three state-listed species: Columbian sharp-tailed grouse (threatened), greater sage grouse (threatened) and the pygmy rabbit (endangered). The US Fish and Wildlife Service also list the pygmy rabbit as endangered. Wildlife area staff seeded 250 acres of old agricultural fields located on the Sagebrush Flat, Dormaier and Chester Butte units. This has been a three project to reestablish high quality shrubsteppe habitat on fields that had either been abandoned (Dormaier) or were dominated by non-native grasses. A mix of 17 native grasses and forbs, most of which were locally collected and grown, was used. First year maintenance included spot spraying Dalmatian toadflax on all sites and mowing annual weeds to reduce competition. Photo points were established and will be integral to long term monitoring and evaluation. Additional monitoring and evaluation will come from existing vegetation transects. This year weed control efforts included spot treatment of noxious weeds, particularly Dalmatian toadflax, in previously restored fields on the Bridgeport Unit (150 acres). Spot treatment also took place within fields scheduled for restoration (40 acres) and in areas where toadflax infestations are small and relatively easily contained. Where toadflax is so widespread that chemical treatment would be impractical, we use the bioagent Mecinus janthinus, available through Professor Gary Piper of Washington State University. This year we released 4,000 M. janthinus on the Bridgeport Unit at 6 separate locations. Since 2002 we have released approximately 14,400 of these insects, 80% of these on the Bridgeport Unit. Additional weed control activities included mowing and spot spraying more than 32 miles of roads, cutting and removal of annual weeds within fenced deer exclosures. We upgraded the solar powered irrigation system that supplies water to a stand of water birch trees planted in 2002. Wildlife area staff designed and built a new solar array and installed a higher capacity pump. The increased capacity will ensure that these trees receive adequate water through the hot summer months and allow us to create at least one additional stand. This project is an important part in our effort to expand the available winter habitat for sharp-tailed grouse on the Bridgeport Unit. Maintenance of fences, parking areas and roads continued during throughout the year. Two parking areas, at Chester Butte and Bridgeport, were graded and additional gravel added. Roads on the Bridgeport Unit were graded and repaired following spring runoff. Trespass and dumping issues have increased in recent years on the Bridgeport Unit. To address these problems we constructed four steel gates at access points on this unit. Each gate is tubular steel attached to 8-inch diameter steel posts, 10 feet long that are cemented into the ground. Two gates allow access to BPA substation facilities and power-line right-of ways so placement, construction and locking issues had to be coordinated with BPA's Real Estate staff in Spokane. Environmental Compliance Documentation issues were addressed again this year. This process has the potential to cause delays the completion of projects within the fiscal year. With this in mind and an eye toward the future, we requested that several projects planned for the coming years be surveyed this year. Beginning in August of 2007, area staff worked with BPA staff to identify work elements

Peterson, Dan [Washington Department of Fish and Wildlife

2008-11-03T23:59:59.000Z

256

Sagebrush Flat Wildlife Area 2008 Annual Report.  

Science Conference Proceedings (OSTI)

The Sagebrush Flat Wildlife Area is a 12,718 acre complex located in Douglas County, Washington. Four distinct management units make up the area: Bridgeport, Chester Butte, Dormaier and Sagebrush Flat. The four Units are located across a wide geographic area within Douglas County. The Units are situated roughly along a north/south line from Bridgeport in the north to the Douglas/Grant county line in the south, 60 miles away. The wildlife area was established to conserve and enhance shrubsteppe habitat for the benefit shrubsteppe obligate and dependent wildlife species. In particular, the Sagebrush Flat Wildlife Area is managed to promote the recovery of three state-listed species: Columbian sharp-tailed grouse (threatened), greater sage grouse (threatened) and the pygmy rabbit (endangered). The US Fish and Wildlife Service also list the pygmy rabbit as endangered. Wildlife area staff seeded 250 acres of old agricultural fields located on the Sagebrush Flat, Dormaier and Chester Butte units. This has been a three project to reestablish high quality shrubsteppe habitat on fields that had either been abandoned (Dormaier) or were dominated by non-native grasses. A mix of 17 native grasses and forbs, most of which were locally collected and grown, was used. First year maintenance included spot spraying Dalmatian toadflax on all sites and mowing annual weeds to reduce competition. Photo points were established and will be integral to long term monitoring and evaluation. Additional monitoring and evaluation will come from existing vegetation transects. This year weed control efforts included spot treatment of noxious weeds, particularly Dalmatian toadflax, in previously restored fields on the Bridgeport Unit (150 acres). Spot treatment also took place within fields scheduled for restoration (40 acres) and in areas where toadflax infestations are small and relatively easily contained. Where toadflax is so widespread that chemical treatment would be impractical, we use the bioagent Mecinus janthinus, available through Professor Gary Piper of Washington State University. This year we released 4,000 M. janthinus on the Bridgeport Unit at 6 separate locations. Since 2002 we have released approximately 14,400 of these insects, 80% of these on the Bridgeport Unit. Additional weed control activities included mowing and spot spraying more than 32 miles of roads, cutting and removal of annual weeds within fenced deer exclosures. We upgraded the solar powered irrigation system that supplies water to a stand of water birch trees planted in 2002. Wildlife area staff designed and built a new solar array and installed a higher capacity pump. The increased capacity will ensure that these trees receive adequate water through the hot summer months and allow us to create at least one additional stand. This project is an important part in our effort to expand the available winter habitat for sharp-tailed grouse on the Bridgeport Unit. Maintenance of fences, parking areas and roads continued during throughout the year. Two parking areas, at Chester Butte and Bridgeport, were graded and additional gravel added. Roads on the Bridgeport Unit were graded and repaired following spring runoff. Trespass and dumping issues have increased in recent years on the Bridgeport Unit. To address these problems we constructed four steel gates at access points on this unit. Each gate is tubular steel attached to 8-inch diameter steel posts, 10 feet long that are cemented into the ground. Two gates allow access to BPA substation facilities and power-line right-of ways so placement, construction and locking issues had to be coordinated with BPA's Real Estate staff in Spokane. Environmental Compliance Documentation issues were addressed again this year. This process has the potential to cause delays the completion of projects within the fiscal year. With this in mind and an eye toward the future, we requested that several projects planned for the coming years be surveyed this year. Beginning in August of 2007, area staff worked with BPA staff to identify work elements

Peterson, Dan [Washington Department of Fish and Wildlife

2008-11-03T23:59:59.000Z

257

Case History of a Clean Water Act Compliance Agreement at the Rocky Flats Environmental Technology Site near Golden, Colorado  

Science Conference Proceedings (OSTI)

A major Clean Water Act (CWA) Federal Facilities Compliance Agreement was signed on March 25, 1991 by the US Department of Energy, Rocky Flats Field Office (DOE, RFFO) and the Water Enforcement Division of the Environmental Protection Agency (EPA), Region VIII. The agreement revised the Rocky Flats Plant`s National Pollutant Discharge Elimination System (NPDES) permit and arose from pemittee-requested changes in effluent monitoring points and permit violations, most notably the February 22, 1989 Chromic Acid Incident. The Rocky Flats Plant, now called the Rocky Flats Environmental Technology Site (Site) near Golden Colorado was operated at that time by Rockwell International Corporation, who later plead guilty to six misdemeanor and felony counts of the CWA (the aforementioned NPDES permit violations) and paid a $4 million fine on March 26, 1992. The Compliance Agreement, hereafter referred to as the NPDES FFCA, called for three separate remedial action plans and contained a schedule for their submittal to the EPA. The compliance plans focussed on: (1) Waste Water Treatment Plant (WWTP) performance upgrades, (2) source control and surface water protection, and (3) characterization of the impacts from past sludge disposal practices. Projects that implemented the compliance plans were initiated soon after submittal to the EPA and are forecast to complete in 1997 at a total cost of over $35 million. This paper presents a case history of NPDES FFCA compliance projects and highlights the successes, failures, and lessons learned.

Thompson, J.S.

1995-08-01T23:59:59.000Z

258

Rocky Flats Closure Unit Cost Data  

SciTech Connect

The Rocky Flats Closure Project has completed the process of stabilizing residual nuclear materials, decommissioning nuclear facilities, remediating environmental media and closing the Rocky Flats Site (Site). The project cost approximately $4.1 B and included the decommissioning of over 700 structures including 5 major plutonium facilities and 5 major uranium facilities, shipping over 14,600 cubic meters of transuranic and 565,000 cubic meters of low level radioactive waste, and remediating a 385-acre industrial area and the surrounding land. Actual costs were collected for a large variety of closure activities. These costs can be correlated with metrics associated with the facilities and environmental media to capture cost factors from the project that could be applicable to a variety of other closure projects both within and outside of the Department of Energy's weapons complex. The paper covers four general topics: the process to correlate the actual costs and metrics, an example of the correlated data for one large sub-project, a discussion of the results, and the additional activities that are planned to correlate and make this data available to the public. The process to collect and arrange the project control data of the Closure Project relied on the actual Closure Project cost information. It was used to correlate these actual costs with the metrics for the physical work, such as building area or waste generated, to support the development of parametric cost factors. The example provides cost factors for the Industrial Sites Project. The discussion addresses the strengths and weaknesses of the data, followed by a section identifying future activities to improve and extend the analyses and integrate it within the Department's Environmental Cost Analysis System. (authors)

Sanford, P.C. [1129 Business Parkway South, Westminister, MD (United States); Skokan, B. [United States Department of Energy, Washington, DC (United States)

2007-07-01T23:59:59.000Z

259

Flat-Plate Photovoltaic Balance of System | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Balance of System Flat-Plate Photovoltaic Balance of System August 20, 2013 - 4:29pm Addthis Complete photovoltaic (PV) energy systems are composed of three subsystems....

260

Unique process combination decontaminates mixed wastewater at Rocky Flats  

Science Conference Proceedings (OSTI)

This paper describes the Sitewide Water Treatment Facility (SWTF) used to process environmental remediation wastewaters found at the Rocky Flats Environmental Technology Site.

Kelso, William J.; Cirillo, J. Russ

1999-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "flat panel called" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Former Worker Medical Screening Program - Rocky Flats Former...  

NLE Websites -- All DOE Office Websites (Extended Search)

Rocky Flats Worker Population Served: Construction Workers Principal Investigator: Knut Ringen, DrPH, MHA, MPH Toll-free Telephone: (800) 866-9663 Local Outreach Office: Dwayne...

262

2006 Annual Ecology Report for the Rocky Flats Site  

Office of Legacy Management (LM)

Ecology Report for the Rocky Flats Site Click on the links below to access different portions of the electronic annual report. 2006 Annual Report Sections Diffuse Knapweed...

263

Big Flats, New York: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

(All States, all geography) Retrieved from "http:en.openei.orgwindex.php?titleBigFlats,NewYork&oldid227756" Categories: Places Cities What links here Related...

264

Groveland-Big Oak Flat, California: Energy Resources | Open Energy...  

Open Energy Info (EERE)

2005 Place to 2006 CBSA Retrieved from "http:en.openei.orgwindex.php?titleGroveland-BigOakFlat,California&oldid236482" Categories: Places Stubs Cities What links here...

265

Big Flat, Arkansas: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Congressional Districts by Places. Retrieved from "http:en.openei.orgwindex.php?titleBigFlat,Arkansas&oldid227754" Categories: Places Stubs Cities What links here Related...

266

The Atomic Safety and Licensing Board Panel  

SciTech Connect

Through the Atomic Energy Act, Congress made is possible for the public to get a full and fair hearing on civilian nuclear matters. Individuals who are directly affected by any licensing action involving a facility producing or utilizing nuclear materials may participate in a formal hearing, on the record, before independent judges on the Atomic Safety and Licensing Board Panel (ASLBP or Panel). Frequently, in deciding whether a license, permit, amendment, or extension should be granted to a particular applicant, the Panel members must be more than mere umpires. If appropriate, they are authorized to go beyond the issues the parties place before them in order to identify, explore, and resolve significant questions involving threats to the public health and safety that come to a board`s attention during the proceedings. This brochure explains the purpose of the panel. Also addressed are: type of hearing handled; method of public participation; formality of hearings; high-level waste; other panel responsibilities and litigation technology.

NONE

1998-03-01T23:59:59.000Z

267

Pulsed-magnetron-sputtered low-temperature indium tin oxide films for flat-panel display applications  

Science Conference Proceedings (OSTI)

In this paper, indium tin oxide (ITO) thin films were prepared by unipolar and bipolar direct current (DC)-pulsed magnetron sputtering in a mixture of argon and oxygen onto unheated glass substrates. The target of ITO with 10 wt.% tin is used. The influences ... Keywords: DC-pulsed magnetron sputtering, Indium tin oxide, electrical and optical properties

William J. Lee; Yean-Kuen Fang; Jyh-Jier Ho; Chin-Ying Chen; Rung-Ywan Tsai; Daoyang Huang; Fang C. Ho; H. W. Chou; C. C. Chen

2002-02-01T23:59:59.000Z

268

Measurement of focal spot size with slit camera using computed radiography and flat-panel based digital detectors  

Science Conference Proceedings (OSTI)

The purpose of this study was to evaluate the use of digital x-ray imagingdetectors for the measurement of diagnostic x-ray tube focal spot size using a slit camera. Slit cameraimages of two focal spots for a radiographicx-ray tube were acquired with direct-exposure film (DF) (as specified by the National Electrical Manufacturers Association [NEMA] Standards Publication No. XR 5

Xiujiang J. Rong; Kerry T. Krugh; S. Jeff Shepard; William R. Geiser

2003-01-01T23:59:59.000Z

269

Implementation of Safeguards and Security Policy Panels  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5,2008 5,2008 MEMORANDUM FOR DISTRIBUTION FROM URITY OFFICER AND SECURITY SUBJECT: Implementation of Safeguards and Security Policy Panels The Office of Health, Safety and Security (HSS) recognizes the importance of well- conceived strategies and policies to support and communicate the security posture of the Department. In order for our security policies to properly reflect and enable Department of Energy corporate strategies, early and frequent communication between policy makers and end users is essential. As outlined in the attached HSS memo, dated December 3,2007, subject: Safeguards and Security Policy Panels, the HSS Office of Security Policy is establishing several new policy panels that will create new opportunities for communication and will include those

270

Panel Discussion | OpenEI Community  

Open Energy Info (EERE)

86 86 Varnish cache server Home Groups Community Central Green Button Applications Developer Utility Rate FRED: FRee Energy Database More Public Groups Private Groups Features Groups Blog posts Content Stream Documents Discussions Polls Q & A Events Notices My stuff Energy blogs 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation: XID: 2142234786 Varnish cache server Panel Discussion Home Kyoung's picture Submitted by Kyoung(155) Contributor 10 October, 2012 - 09:02 GRR Workshop at GRC GRC GRR Panel Discussion workshop Last week, Tuesday (10/2), we held an all-day workshop at the Peppermill Hotel in Reno, NV. The workshop included presentations on the project background and history, status updates, analysis summary and future directions. The day ended with a panel discussion, with members including

271

Panel Session III: Innovation and Coordination  

NLE Websites -- All DOE Office Websites (Extended Search)

Lessons Learned for Hydrogen Panel Session III: Innovation Panel Session III: Innovation and Coordination and Coordination ______________________________ Stefan Unnasch Life Cycle Associates 3 April 2008 2 Hydrogen Vision Life Cycle Associates 3 Hydrogen Infrastructure Today Life Cycle Associates Source: Weinert, J. X., et al.. (2005). CA Hydrogen Highway Network Blueprint Plan, Economics Report 4 Innovation and Coordination Life Cycle Associates Innovation Coordination ☯ Slow Fast Cars Codes 5 Innovation and Coordination Life Cycle Associates Innovation Coordination ☯ Slow Fast Cars Codes Fuel production and delivery technology Vehicle technology Marketing Policy Early introduction strategy GHG strategies

272

Gridcore corners the market on lightweight panels  

Science Conference Proceedings (OSTI)

When David Saltman, vice president of marketing and sales for Gridcore Systems International (GSI, Long Beach, CA), talks of his company's 100% recycled-content product, he does not start off by touting the product's environmental benefits. Instead, he delivers a litany of reasons his company's panels, which are made from waste paper and primarily used by the exhibit, entertainment, and interior design industries, are better than panels made from plywood or particle board. GSI's product is of equivalent strength but less than half the weight of these forest products. It also is cheaper to ship, easier on machinery and the work force, and customers find it more portable.

Rabasca, L.

1994-12-01T23:59:59.000Z

273

Installation package for concentrating solar collector panels  

DOE Green Energy (OSTI)

Northrup, Inc., has developed and delivered 300 square feet of Concentrating Solar Collector (ML Series) and Attitude Control System, under the direction of the National Aeronautics and Space Administration. The ''ML Series'' Solar Collector Panels comprise a complete package array consisting of collector panels using modified Fresnel Prismatic Lenses for a 10 to 1 concentrating ration, supporting framework, fluid manifolding and tracking drive system, in unassembled components for field erection. The Installation, Operation and Maintenance Manual, Warranty, List of Materials, Sub-Assembly drawings and Final Field Assembly Drawings are included in the package.

Not Available

1978-08-01T23:59:59.000Z

274

NATURAL HERITAGE RESOURCES OF THE ROCKY FLATS ENVIRONMENTAL TECHNOLOGY SITE  

E-Print Network (OSTI)

.S. Department of Energy's Rocky Flats Field Office for making this report possible. In particular, Dr. John.S. Department of Energy's Rocky Flats Field Office to inventory and rank the natural heritage resources at its Divide. The RFETS is part of the U.S. Department of Energy nuclear weapons manufacturing complex

275

Water Monitoring Flume Replaced at the Rocky Flats, Colorado, Site |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Water Monitoring Flume Replaced at the Rocky Flats, Colorado, Site Water Monitoring Flume Replaced at the Rocky Flats, Colorado, Site Water Monitoring Flume Replaced at the Rocky Flats, Colorado, Site October 22, 2013 - 11:01am Addthis What does this project do? Goal 1. Protect human health and the environment In August of this year the U.S. Department of Energy (DOE) Office of Legacy Management (LM) Rocky Flats, site took advantage of an existing water diversion structure that was no longer needed, to replace an aging water monitoring flume and avoid future repairs that could interrupt data collection. The flume for Rocky Flats Legacy Management Agreement (RFLMA) Point of Evaluation (POE) monitoring location GS10 in South Walnut Creek was located at the bottom of fairly steep channel banks. The bank on the south side shows localized slumping and sliding toward the creek and GS10. Although

276

Independent Oversight Review, Rocky Flats Environmental Technology Site -  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Rocky Flats Environmental Technology Rocky Flats Environmental Technology Site - March 2000 Independent Oversight Review, Rocky Flats Environmental Technology Site - March 2000 March 2000 Review of the Rocky Flats Environmental Technology Site Transportation Emergency Management Program The U.S. Department of Energy (DOE) Office of Emergency Management Oversight, within the Office of Independent Oversight and Performance Assurance, conducted a transportation emergency management review and a follow-up review of the emergency management program at Rocky Flats Environmental Technology Site (RFETS) in February 2000. The primary purpose of this review was to assess the effectiveness of the Department's emergency management programs for transportation events involving hazardous materials (not related to transuranic waste or nuclear

277

EA-1146: Radioactive Waste Storage at Rocky Flats Environmental Technology  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

46: Radioactive Waste Storage at Rocky Flats Environmental 46: Radioactive Waste Storage at Rocky Flats Environmental Technology Site, Golden, Colorado EA-1146: Radioactive Waste Storage at Rocky Flats Environmental Technology Site, Golden, Colorado SUMMARY This EA evaluates the environmental impacts of the proposal to convert buildings at the U.S. Department of Energy Rocky Flats Environmental Technology Site from their former uses to interim waste storage facilities in order to increase storage capacity for low-level waste, low-level mixed waste, transuranic waste, and transuranic mixed waste. PUBLIC COMMENT OPPORTUNITIES None available at this time. DOCUMENTS AVAILABLE FOR DOWNLOAD April 9, 1996 EA-1146: Finding of No Significant Impact Radioactive Waste Storage at Rocky Flats Environmental Technology Site, Golden, Colorado

278

Independent Oversight Review, Rocky Flats Environmental Technology Site -  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Independent Oversight Review, Rocky Flats Environmental Technology Independent Oversight Review, Rocky Flats Environmental Technology Site - March 2000 Independent Oversight Review, Rocky Flats Environmental Technology Site - March 2000 March 2000 Review of the Rocky Flats Environmental Technology Site Transportation Emergency Management Program The U.S. Department of Energy (DOE) Office of Emergency Management Oversight, within the Office of Independent Oversight and Performance Assurance, conducted a transportation emergency management review and a follow-up review of the emergency management program at Rocky Flats Environmental Technology Site (RFETS) in February 2000. The primary purpose of this review was to assess the effectiveness of the Department's emergency management programs for transportation events involving hazardous materials (not related to transuranic waste or nuclear

279

West Ford Flat Geothermal Facility | Open Energy Information  

Open Energy Info (EERE)

Ford Flat Geothermal Facility Ford Flat Geothermal Facility Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home West Ford Flat Geothermal Facility General Information Name West Ford Flat Geothermal Facility Facility West Ford Flat Sector Geothermal energy Location Information Location Clear Lake, California Coordinates 38.788136285865°, -122.72210240364° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":38.788136285865,"lon":-122.72210240364,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

280

Microsoft Word - RockyFlatsPropLR111406.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

November 15, 2006 November 15, 2006 REPLY TO ATTN OF: IG-40 SUBJECT: Letter Report on "Alleged Waste of Funds Involving Excess Property at Rocky Flats" (INS-L-07-03) TO: Assistant Secretary for Environmental Management This is to advise you of the results of an Office of Inspector General inspection of alleged waste of funds involving excess property at the Department of Energy's (DOE's) Rocky Flats site. BACKGROUND Nuclear weapons production operations at Rocky Flats were discontinued in 1992. Subsequently, responsibility for Rocky Flats was reassigned from the Department's Office of Defense Programs to the Office of Environmental Management. In January 2000, DOE entered into a contract with Kaiser-Hill Company, LLC, for the closure of Rocky Flats by

Note: This page contains sample records for the topic "flat panel called" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Call for White Papers 2009 Nanometrolgy Nano  

NLE Websites -- All DOE Office Websites (Extended Search)

ONR/ONAMI ONR/ONAMI Program on Nanometrology, Nanoelectronics and Nanobiotechnology Call for White Papers 2009 Projects November 21, 2008 Objective The objective of this solicitation is to identify projects that can be funded under the ONAMI FY2009 Nanometrology, Nanoelectronics and Nanobiotechnology congressional interest initiative. These projects should address the goals of the initiative and relate to the research needs of ONR (the sponsor of this initiative) and lead to significant external funding in the future. Background In FY2006 the Oregon Nanoscience and Microtechnologies Institute (ONAMI) was awarded $2.5M to establish the Nanometrology and Nanoelectronics Initiative, now the Nanometrology, Nanoelectronics and Nanobiotechnology Initiative (N 3 I). The technical sponsor for this project is the Office of Naval Research. Working with ONR, ONAMI selected 21 proposals

282

TEC Working Group Topic Groups Rail Conference Call Summaries...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Rail Conference Call Summaries Tracking Subgroup TEC Working Group Topic Groups Rail Conference Call Summaries Tracking Subgroup Tracking Subgroup March 27, 2006 March 6, 2006...

283

DOE Transportation Protocols Topic Group Conference Call Summary...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Conference Call Summary May 13, 1999 The Transportation External Coordination Working Group (TECWG) Protocols Topic Group held a conference call on May 13, 1999, to discuss the...

284

TEC Working Group Topic Groups Rail Conference Call Summaries...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

TEC Working Group Topic Groups Rail Conference Call Summaries CONFERENCE CALL SUMMARIES Rail Topic Group Inspections Subgroup Planning Subgroup Tracking Subgroup TRAGIS Subgroup...

285

Secretary of Energy Advisory Board Hosts Conference Call on Shale...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

You are here Home Secretary of Energy Advisory Board Hosts Conference Call on Shale Gas Draft Report Secretary of Energy Advisory Board Hosts Conference Call on Shale Gas...

286

Testing wall panels for earthquake response  

SciTech Connect

As part of the structural response research program being conducted for the Nevada Operations Office of ERDA a testing program for the investigation of nonstructural wall panels subjected to racking was developed and conducted. The objectives of the testing program were to determine thresholds for damage to partitions due to horizontal adjacent story displacement in high-rise buildings and to gather data that can be used to determine the influence of nonstructural partitions on the structural response of high-rise buildings. In general, the wall panels were constructed to represent typical partitions used in high-rise building construction. Some of the panels were used for special parameter studies or for comparisons with other test programs. A specially designed testing frame simulated cyclic lateral displacement, parallel to the plane of the wall panels, that might be experienced during the response of a building to strong winds or earthquake motion. Stiffness and strength characteristics, estimates of equivalent viscous damping, and damage threshold results were obtained. The data appear to give a good approximate evaluation of the performance of non-load-bearing partitions under cyclic loading. (LCL)

Freeman, S.A.

1976-01-01T23:59:59.000Z

287

ROBOTIC DEVICE FOR CLEANING PHOTOVOLTAIC PANEL ARRAYS  

E-Print Network (OSTI)

output from a photovoltaic cell installed at Northeastern University., Boston, MA, USA. The graph shows to human crews and current hardware alternatives. A photovoltaic cell is an electronic device that converts1 ROBOTIC DEVICE FOR CLEANING PHOTOVOLTAIC PANEL ARRAYS MARK ANDERSON, ASHTON GRANDY, JEREMY HASTIE

Mavroidis, Constantinos

288

Numerical study of a ventilated facade panel  

Science Conference Proceedings (OSTI)

An energy-saving facade panel for non-residential buildings has been numerically investigated. Structured like a composite Trombe-Michel wall, the panel consists of a glazing, an absorber plate and insulation and contains a dead air space between glazing and absorber, as well as a convection channel between absorber and insulation. The influence of convection channel spacing on both recovery of solar energy during sunshine periods and on heat losses during night hours has been assessed. Two different options have been considered. First, the total panel thickness was maintained, which involves an increase of channel spacing having to be compensated by a corresponding decrease of the insulation thickness. Then, this constraint was removed so that an increase in channel spacing was allowed to entail an equivalent increase of the total panel thickness. The results indicate that large spacing favors energy recovery during sunshine periods for both options and reduces, although only slightly, heat losses during night hours for the second option. In the case of the first option, however, these losses tend to grow when channel spacing increases. 15 refs., 5 figs.

Mootz, F.; Bezian, J.J. [Centre d`Energetique de l`Ecole des Mines de Paris (France)

1996-07-01T23:59:59.000Z

289

Call center demand forecasting : improving sales calls prediction accuracy through the combination of statistical methods and judgmental forecast  

E-Print Network (OSTI)

Call centers are important for developing and maintaining healthy relationships with customers. At Dell, call centers are also at the core of the company's renowned direct model. For sales call centers in particular, the ...

Boulin, Juan Manuel

2010-01-01T23:59:59.000Z

290

Seismic hazard analysis. Volume 5. Review panel, Ground Motion Panel, and feedback results  

SciTech Connect

The Site Specific Spectra Project (SSSP) was a multi-year study funded by the US Nuclear Regulatory Commission to provide estimates of the seismic hazards at a number of nuclear power plant sites in the Eastern US. A key element of our approach was the Peer Review Panel, which we formed in order to ensure that our use of expert opinion was reasonable. We discuss the Peer Review Panel results and provide the complete text of each member's report. In order to improve the ground motion model, an Eastern US Ground Motion Model Panel was formed. In Section 4 we tabulate the responses from the panel members to our feedback questionnaire and discuss the implications of changes introduced by them. We conclude that the net difference in seismic hazard values from those presented in Volume 4 is small and does not warrant a reanalysis. 22 figs.

Bernreuter, D.L.

1981-08-01T23:59:59.000Z

291

Teaching the classics of simulation to beginners, panel: teaching the classics of simulation to beginners (panel)  

Science Conference Proceedings (OSTI)

In order to get more people to use and understand simulation, improved teaching of simulation to beginners is important. The panel members share their experience in teaching the classic systems of simulation, used for several decades, to novice students.

Ingolf Ståhl; Raymond R. Hill; Joan M. Donohue; Henry Herper; Catherine M. Harmonosky; W. David Kelton

2003-12-01T23:59:59.000Z

292

Mechanical behavior of dip-brazed aluminum sandwich panels  

E-Print Network (OSTI)

An experimental study was carried out to determine the mechanical behavior of sandwich panels containing cellular cores of varying shape. Compression and four point bend tests were performed on sandwich panels with square ...

Hohmann, Brian P. (Brian Patrick)

2007-01-01T23:59:59.000Z

293

Solar Panels to Help Iowa Students Learn About Renewable Energy...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Solar Panels to Help Iowa Students Learn About Renewable Energy Solar Panels to Help Iowa Students Learn About Renewable Energy May 10, 2010 - 10:53am Addthis Five Iowa schools...

294

Carports with Solar Panels do Double Duty for Navy | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Carports with Solar Panels do Double Duty for Navy Carports with Solar Panels do Double Duty for Navy May 14, 2010 - 12:22pm Addthis Joshua DeLung What does this project do? In...

295

Olive Oil Sensory Panel Laboratory Proficiency Testing Program  

Science Conference Proceedings (OSTI)

Lab Proficiency Testing service for Olive oil. Sensory panel determination of Extra Virgin, Virgin, Lampante using International Olive Council guideline COI/T.20/Doc. No 15/Rev. 4 Olive Oil Sensory Panel Laboratory Proficiency Testing Program Olive Oil

296

San Diego Solar Panels Generate Clean Electricity Along with...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

San Diego Solar Panels Generate Clean Electricity Along with Clean Water San Diego Solar Panels Generate Clean Electricity Along with Clean Water May 26, 2010 - 12:11pm Addthis San...

297

Call Forwarding: New NIST Procedure Could Speed Cell ...  

Science Conference Proceedings (OSTI)

Call Forwarding: New NIST Procedure Could Speed Cell Phone Testing. For Immediate Release: March 2, 2010. ...

2010-10-05T23:59:59.000Z

298

An innovative and sustainable building system using structural insulated panels  

E-Print Network (OSTI)

An innovative and sustainable building system using structural insulated panels Researcher: Mrst October 2010 Funding bodies: EPSRC and ErgoHome Ltd. Introduction Structural Insulated Panels (SIPs) are high performance building panels which are considered to be the next generation of timber

Birmingham, University of

299

Nortel CallPilot A-Style Command Comparison Card  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Welcome to CallPilot. This card helps you to learn CallPilot by showing you the key differences between Welcome to CallPilot. This card helps you to learn CallPilot by showing you the key differences between CallPilot and your previous messaging system. For example, in CallPilot, you don't need a main menu. When you log in, you are at your first new message right away. To play your messages, compose new messages, or change mailbox settings, you use standard commands that are common to all features. Prompts guide you whenever you pause, and Help is always there when you need it - just press *. For further information, refer to the CallPilot Multimedia Messaging User Guide. Features CallPilot Previous system These keypad diagrams show the frequently used message commands in CallPilot and your previous system. In CallPilot, the following commands are

300

Integrated Thermal Treatment Systems study: US Department of Energy Internal Review Panel report  

Science Conference Proceedings (OSTI)

The U.S. Department of Energy`s (DOE) Office of Technology Development (OTD) commissioned two studies to uniformly evaluate nineteen thermal treatment technologies. These studies were called the Integrated Thermal Treatment System (ITTS) Phase I and Phase II. With the advice and guidance of the DOE Office of Environmental Management`s (EM`s) Mixed Waste Focus Group, OTD formed an ITTS Internal Review Panel, composed of scientists and engineers from throughout the DOE complex, the U.S. Environmental Protection Agency (EPA), the California EPA, and private experts. The Panel met from November 15-18, 1994, to review and comment on the ITTS studies, to make recommendations on the most promising thermal treatment systems for DOE mixed low level wastes (MLLW), and to make recommendations on research and development necessary to prove the performance of the technologies on MLLW.

Cudahy, J.; Escarda, T.; Gimpel, R. [and others

1995-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "flat panel called" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Nonimaging solar energy concentrators (CPC's) with fully illuminated flat receivers: A viable alternative to flat-plate collectors  

SciTech Connect

Low-concentration, stationary, nonimaging concentrators (CPC's) with flat receivers illuminated on both sides are considered as viable alternatives to flat-plate solar collectors. Closed-form, analytic formulae are derived for the geometric characteristics of two concentrator types of greatest interest (i.e., stationary collectors for year-round energy delivery), which enable calculations of collectible energy without computer ray-tracing stimulations. The relative merits of these concentrators in terms of energy collection and production costs are assessed with respect to each other as well as to flat-plate collectors.

Gordon, J.M.

1986-08-01T23:59:59.000Z

302

Proposal Review Panels (Areas Other Than Crystallography)  

NLE Websites -- All DOE Office Websites (Extended Search)

Proposal Review Panels Proposal Review Panels High Pressure Instrumentation Imaging/ Microbeam Macromolecular Crystallography Scattering Applied Materials Stanislav Sinogeikin, Chair Tim Graber, Chair Patrick LaRiviere, Chair John Rose, Chair Robert Suter, Chair Ercan Alp Maria Baldini Bin Chen Przemyslaw Dera Lars Ehm Ravi Kumar Barbara Lavina Sang-Heon (Dan) Shim Heather Watson Keith Brister Wenjun Liu Darren Dale Matthew Ginder-Vogel Xiaojing Huang (guest) Tony Lanzirotti Lisa Miller Mark Pfeifer Martina Ralle Xianghui Xiao Hanfei Yan Arnon Lavie Anne Mulichak Armand Beaudoin Dillon Fong Dileep Singh Mike Toney Bob Von Dreele Scattering Condensed Matter Scattering Chem/Biol/Environ Small Angle Scattering (SAXS) Spectroscopy Structural Science Roy Clarke, Chair Lynda Soderholm, Chair Peter Jemian, Chair Mali Balasubramanian, Chair

303

Bexar County Parking Garage Photovoltaic Panels  

Science Conference Proceedings (OSTI)

The main objective of the Bexar County Parking Garage Photovoltaic (PV) Panel project is to install a PV System that will promote the use of renewable energy. This project will also help sustain Bexar County ongoing greenhouse gas emissions reduction and energy efficiency goals. The scope of this project includes the installation of a 100-kW system on the top level of a new 236,285 square feet parking garage. The PV system consists of 420 solar panels that covers 7,200 square feet and is tied into the electric-grid. It provides electricity to the office area located within the garage. The estimated annual electricity production of the PV system is 147,000 kWh per year.

Golda Weir

2012-01-23T23:59:59.000Z

304

Final Rocky Flats Cleanup Agreement, July 19, 1996 Summary  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Rocky Flats Cleanup Agreement Rocky Flats Cleanup Agreement State Colorado Agreement Type Federal Facility Agreement Legal Driver(s) CERCLA/RCRA Scope Summary Establish the regulatory framework for achieving the ultimate cleanup of the Rocky Flats Site. Parties DOE; US EPA; The State of Colorado Date 7/19/1996 SCOPE * Establish the regulatory framework for achieving the ultimate cleanup of the Rocky Flats Site. * Ensure that the environmental impacts associated with activities at the Site will continue to be investigated and that appropriate response actions are taken. * Establish a procedural framework and schedule for developing, implementing, and monitoring appropriate response actions at the site. * Coordinate all of DOE's cleanup obligations under CERCLA, RCRA, and the Colorado

305

Preliminary Notice of Violation , Rocky Flats Environmental Technology Site  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Violation , Rocky Flats Environmental Violation , Rocky Flats Environmental Technology Site - EA-96-05 Preliminary Notice of Violation , Rocky Flats Environmental Technology Site - EA-96-05 October 7, 1996 Preliminary Notice of Violation issued to Safe Sites of Colorado related to Radiological and Work Control Deficiencies associated with Two Radiological Release Events at the Rocky Flats Environmental Technology Site, (EA-96-05) Based on our evaluation of these matters, DOE has concluded that violations of DOE's Occupational Radiation Protection Rule (10 CFR 835) and Quality Assurance Rule (10 CFR 830.120) likely occurred. An enforcement conference was held with you, as well as senior management of KHLL and Rocky Mountain Remediation Services (RMRS), on September 10, 1996. This conference included a discussion of the facts and circumstances surrounding these

306

Rocky Flats Former Construction Workers, Construction Worker Screening  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Rocky Flats Former Construction Workers, Construction Worker Rocky Flats Former Construction Workers, Construction Worker Screening Projects Rocky Flats Former Construction Workers, Construction Worker Screening Projects Project Name: Building Trades National Medical Screening Program Covered DOE Site: Rocky Flats Worker Population Served: Construction Workers Principal Investigator: Knut Ringen, DrPH, MHA, MPH Toll-free Telephone: (800) 866-9663 Local Outreach Office: Dwayne Adkins 7510 W. Mississippi Ave., Suite 230 Lakewood, CO 80226 Website: http://www.btmed.org This project is intended to provide free medical screening to former workers in the building trades (construction workers). The screening targets health problems resulting from exposures, including asbestos, beryllium, cadmium, chromium, lead, mercury, noise, radiation, silica

307

Gabbs Alkali Flat Geothermal Area | Open Energy Information  

Open Energy Info (EERE)

Gabbs Alkali Flat Geothermal Area Gabbs Alkali Flat Geothermal Area (Redirected from Gabbs Alkali Flat Area) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Geothermal Resource Area: Gabbs Alkali Flat Geothermal Area Contents 1 Area Overview 2 History and Infrastructure 3 Regulatory and Environmental Issues 4 Exploration History 5 Well Field Description 6 Geology of the Area 7 Geofluid Geochemistry 8 NEPA-Related Analyses (0) 9 Exploration Activities (2) 10 References Area Overview Geothermal Area Profile Location: Nevada Exploration Region: Walker-Lane Transition Zone Geothermal Region GEA Development Phase: 2008 USGS Resource Estimate Mean Reservoir Temp: Estimated Reservoir Volume: Mean Capacity: Click "Edit With Form" above to add content History and Infrastructure Operating Power Plants: 0

308

Microsoft Word - RockyFlatsCRO20030221.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

300,000 Block Grant to the 300,000 Block Grant to the Rocky Flats Community Reuse Organization Money Will Be Used To Develop Comprehensive Refuge Plan for Rocky Flats WASHINGTON, DC - The Department of Energy (DOE) today announced that it will award $300,000 to the Rocky Flats Coalition of Local Governments. A CRO is an organization recognized by the Energy Department that can apply for funding for programs that can modify the impacts of workforce restructuring at its facilities and reduce community dependence on the department's activities. This grant will enable the community reuse organization (CRO) to continue to play a critical role in working with the Energy Department on the development of a comprehensive refuge plan for Rocky Flats, review cleanup and closure documents to ensure that they meet long-term

309

Final Transuranic Waste Shipment Leaves Rocky Flats | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Final Transuranic Waste Shipment Leaves Rocky Flats Final Transuranic Waste Shipment Leaves Rocky Flats Final Transuranic Waste Shipment Leaves Rocky Flats April 19, 2005 - 12:23pm Addthis Cleanup Ahead of Schedule, On Track to Save Taxpayers Billions GOLDEN, CO. - A major environmental victory was achieved at the Rocky Flats Site in Golden, Colo., today when the final remaining shipment of radioactive, transuranic (TRU) waste left the property on a truck bound for an underground waste repository in New Mexico. This major milestone is another step toward the final conversion of the site to a National Wildlife Refuge managed by the U.S. Fish and Wildlife Service. "This is great news for all of Colorado, and would not have been possible without hand-in-glove cooperation between the Department of Energy, the

310

Rocky Flats 100th Shipments Arrives at WIPP  

NLE Websites -- All DOE Office Websites (Extended Search)

RELEASE Rocky Flats For Immediate Release Contact: Karen Lutz, DOE RFFO, 303966-4546 01-08 Jennifer Thompson, Kaiser-Hill, 303966-6285 Kate Foster, Westinghouse TRU Solutions,...

311

Former Worker Medical Screening Program - Rocky Flats Former...  

NLE Websites -- All DOE Office Websites (Extended Search)

Rocky Flats Worker Population Served: Production Workers Principal Investigator: Donna Cragle, PhD Toll-free Telephone: (866) 812-6703 Website: http:www.orau.orgnssp This...

312

Rocky Flats, Colorado, Site Quarterly Report of Site Surveillance  

Office of Legacy Management (LM)

Calendar Year 2013 October 2013 This page intentionally left blank U.S. Department of Energy Rocky Flats Site Quarterly Report of Site Surveillance and Maintenance Activities-2nd...

313

Interacting holographic dark energy model in non-flat universe  

E-Print Network (OSTI)

We employ the holographic model of interacting dark energy to obtain the equation of state for the holographic energy density in non-flat (closed) universe enclosed by the event horizon measured from the sphere of horizon named $L$.

M R Setare

2006-09-11T23:59:59.000Z

314

Dynamically generated flat-band phases in optical kagome lattices  

E-Print Network (OSTI)

We suggest that a dynamically generated flat-band insulator can be realized using ultracold fermions loaded in an optical kagome lattice by depleting the mobile atoms at one edge of the lattice with a focused laser beam. Since the flat band of the kagome lattice is a high-energy one compared to the dispersive bands, this dynamically generated flat-band insulator is a population-inversion phase with no pumping required to maintain it after its formation. We also show that in a similar setup a dynamical stripe phase emerges in the flat band when two-component fermions with weakly repulsive interactions evolve in a static kagome lattice or even in the absence of interactions when the optical lattice is modulated. Given the broad variety of lattice geometries supporting frustration-induced localized states, our work opens the door to atomtronic devices utilizing geometrical effects and offers new insight on the dynamics of geometrically frustrated systems.

Gia-Wei Chern; Chih-Chun Chien; Massimiliano Di Ventra

2013-07-23T23:59:59.000Z

315

Big Flats Airport, New York: Energy Resources | Open Energy Informatio...  

Open Energy Info (EERE)

Bureau 2005 Place to 2006 CBSA Retrieved from "http:en.openei.orgwindex.php?titleBigFlatsAirport,NewYork&oldid227755" Categories: Places Stubs Cities What links here...

316

IV Estimation of Panels with Factor Residuals  

E-Print Network (OSTI)

. In microeconometric panels, the factor structure may capture different sources of unobserved individual-specific heterogeneity, the impact of which varies intertem- porally in an arbitrary way. For instance, in studies of production functions, the factor loadings may... supply, Euler equations for household consumption, and em- pirical growth models. In these models the coefficient of the lagged dependent variable captures inertia, habit formation and costs of adjustment and therefore it has structural significance (see...

Robertson, Donald; Sara dis, Vasilis

2013-06-04T23:59:59.000Z

317

MEMOCODE 2003 Panel Stephen A. Edwards  

E-Print Network (OSTI)

MEMOCODE 2003 Panel Stephen A. Edwards Department of Computer Science, Columbia University www-level synthesis and validation. #12;Euclid's Algorithm on the PDP-11 .globl _gcd GPRs: r0-r7 .text r7=PC, r6=SP, r5=FP _gcd: jsr r5, rsave Save SP in FP L2: mov 4(r5), r1 r1 = n sxt r0 sign extend div 6(r5), r0 r0

318

Flat beams in a 50 TeV hadron collider  

SciTech Connect

The basic beam dynamics of a next generation 50 x 50 TeV hadron collider based on a high field magnet approach have been outlined over the past several years. Radiation damping not only produces small emittances, but also flat beams, just as in electron machines. Based on {open_quotes}Snowmass 96{close_quotes} parameters, we investigate the issues associated with flat beams in very high energy hadron colliders.

Peggs, S.; Harrison, M.; Pilat, F.; Syphers, M.

1997-08-01T23:59:59.000Z

319

Non-flat time-variable dark energy cosmology  

E-Print Network (OSTI)

We generalize the time-variable dark energy scalar field $\\Phi$ model ($\\Phi$CDM) to non-flat space. We show that even in the space-curvature-dominated epoch the scalar field solution is a time-dependent fixed point or attractor, with scalar field energy density that grows relative to the energy density in spatial curvature. This is the first example of a physically consistent and complete model of dynamical dark energy in a non-flat geometry.

Pavlov, Anatoly; Saaidi, Khaled; Ratra, Bharat

2013-01-01T23:59:59.000Z

320

THE U.S. DEPARTMENT OF ENERGY'S FACILITY REUSE AT THE ROCKY FLATS...  

NLE Websites -- All DOE Office Websites (Extended Search)

FACILITY REUSE AT THE ROCKY FLATS ENVIRONMENTALTECHNOLOGY SITE, IG-0425 THE U.S. DEPARTMENT OF ENERGY'S FACILITY REUSE AT THE ROCKY FLATS ENVIRONMENTALTECHNOLOGY SITE, IG-0425 For...

Note: This page contains sample records for the topic "flat panel called" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Microsoft Word - 19_SSABchairs.conference_call.feb24Mar3.final.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

February 24, 2005 February 24, 2005 3:00 - 3:45 p.m. Participants Chairs/Representatives: Fernald Jim Bierer Hanford Todd Martin Idaho David Kipping Nevada Charles Phillips, Carla Sanda NNM Jim Brannon, Ted Taylor, Menice Manzanares Oak Ridge Kerry Trammell, Norm Mulvenon, Pat Halsey, Pete Osborne Paducah Chad Kerley Rocky Flats Jerry Depoorter, Ken Korkia Savannah River Jean Sulc, Bill Lawless DOE representatives: EM-21 Sandra Waisley (DFO) EM-30.1 Melissa Nielson, Jay Vivari, Frederick Dowd, Doug Frost OPENING REMARKS After welcoming everyone, Sandra Waisley introduced Melissa Nielson, who is taking over management of the Internal/External Coordination Group (EM-30.1). Ms. Nielson will participate on conference calls and will attend the April Chairs' meeting.

322

Solar Water Heater Basics | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Solar Water Heater Basics Solar Water Heater Basics August 19, 2013 - 3:01pm Addthis Illustration of an active, closed loop solar water heater. A large, flat panel called a flat...

323

Solar Water Heaters | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Solar Water Heaters Solar Water Heaters August 19, 2013 - 3:01pm Addthis Illustration of an active, closed loop solar water heater. A large, flat panel called a flat plate...

324

Flattening Scientific CCD Imaging Data with a Dome Flat Field System  

E-Print Network (OSTI)

We describe the flattening of scientific CCD imaging data using a dome flat field system. The system uses light emitting diodes (LEDs) to illuminate a carefully constructed dome flat field screen. LEDs have several advantages over more traditional illumination sources: they are available in a wide range of output wavelengths, are inexpensive, have a very long source lifetime, and are straightforward to control digitally. The circular dome screen is made of a material with Lambertian scattering properties that efficiently reflects light of a wide range of wavelengths and incident angles. We compare flat fields obtained using this new system with two types of traditionally-constructed flat fields: twilight sky flats and nighttime sky flats. Using photometric standard stars as illumination sources, we test the quality of each flat field by applying it to a set of standard star observations. We find that the dome flat field system produces flat fields that are superior to twilight or nighttime sky flats, particularly for photometric calibration. We note that a ratio of the twilight sky flat to the nighttime sky flat is flat to within the expected uncertainty; but since both of these flat fields are inferior to the dome flat, this common test is not an appropriate metric for testing a flat field. Rather, the only feasible and correct method for determining the appropriateness of a flat field is to use standard stars to measure the reproducibility of known magnitudes across the detector.

J. L. Marshall; D. L. DePoy

2005-10-07T23:59:59.000Z

325

EM SSAB Chairs Conference Calls | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

EM SSAB Chairs EM SSAB Chairs Conference Calls EM SSAB Chairs Conference Calls October 25, 2007 EM SSAB Conference Calls - October 25, 2007 Special Conference Call - Minutes and highlights of the Environmental Management (EM) Site Specific Advisory Board's (SSAB) special conference call including Participants, DOE-HQ Representatives, Opening Remarks, Program, Chairs' Meeting, and Around the Complex updates and Closing Remarks. July 26, 2007 EM SSAB Conference Calls - July 26, 2007 Minutes and highlights of the Environmental Management (EM) Site Specific Advisory Board's (SSAB) Bi-Monthly conference call including Participants, DOE-HQ Representatives, Opening Remarks, Program, Chairs' Meeting, and Around the Complex updates and Closing Remarks. May 10, 2007 EM SSAB Conference Calls - May 10, 2007

326

Conference Call and Web Chat on Small Businesses and Government...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Conference Call and Web Chat on Small Businesses and Government Contracting Conference Call and Web Chat on Small Businesses and Government Contracting March 27, 2012 - 2:15pm...

327

Optimizing Call Center Staffing using Simulation and Analytic Center ...  

E-Print Network (OSTI)

Green et al. (2001) coined the term SIPP (stationary, independent, period by period) to describe ... proposed set of staffing levels, and a genetic algorithm to guide the search. ...... A new call cannot enter service until there are fewer calls in

328

DOE TEC Radiation Monitoring Subtopic Group Conference Call 10...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Radiation Monitoring Subtopic Group Conference Call Thursday, October 11, 2007, 3:00 p.m. - 4:30 p.m. EDT Conference Call Minutes Participants: Chair: Cort Richardson (CSGNE)...

329

TEC Working Group Topic Groups Rail Conference Call Summaries...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Conference Call Summaries Rail Topic Group TEC Working Group Topic Groups Rail Conference Call Summaries Rail Topic Group Rail Topic Group May 17, 2007 January 16, 2007 August 31,...

330

NAMII Announces Second Call for Additive Manufacturing Projects  

Science Conference Proceedings (OSTI)

Sep 6, 2013 ... The National Additive Manufacturing Innovation Institute (NAMII) has announced its second call for additive manufacturing applied research ...

331

NIST Calls for Suggestions to Speed Computer Incident ...  

Science Conference Proceedings (OSTI)

NIST Calls for Suggestions to Speed Computer Incident Teams Responses. From NIST Tech Beat: June 28, 2013. ...

2013-07-10T23:59:59.000Z

332

Method for molding threads in graphite panels  

DOE Patents (OSTI)

A graphite panel (10) with a hole (11) having a damaged thread (12) is repaired by drilling the hole (11) to remove all of the thread and make a new hole (13) of larger diameter. A bolt (14) with a lubricated thread (17) is placed in the new hole (13) and the hole (13) is packed with graphite cement (16) to fill the hole and the thread on the bolt. The graphite cement (16) is cured, and the bolt is unscrewed therefrom to leave a thread (20) in the cement (16) which is at least as strong as that of the original thread (12).

Short, William W. (Livermore, CA); Spencer, Cecil (Silverton, OR)

1994-01-01T23:59:59.000Z

333

Method for molding threads in graphite panels  

DOE Patents (OSTI)

A graphite panel with a hole having a damaged thread is repaired by drilling the hole to remove all of the thread and making a new hole of larger diameter. A bolt with a lubricated thread is placed in the new hole and the hole is packed with graphite cement to fill the hole and the thread on the bolt. The graphite cement is cured, and the bolt is unscrewed therefrom to leave a thread in the cement which is at least as strong as that of the original thread. 8 figures.

Short, W.W.; Spencer, C.

1994-11-29T23:59:59.000Z

334

Light redirective display panel and a method of making a light redirective display panel  

DOE Patents (OSTI)

An optical display panel which provides improved light intensity at a viewing angle by redirecting light emitting from the viewing screen, and a method of making a light redirective display panel, are disclosed. The panel includes an inlet face at one end for receiving light, and an outlet screen at an opposite end for displaying the light. The inlet face is defined at one end of a transparent body, which body may be formed by a plurality of waveguides, and the outlet screen is defined at an opposite end of the body. The screen includes light redirective elements at the outlet screen for re-directing light emitting from the outlet screen. The method includes stacking a plurality of glass sheets, with a layer of adhesive or epoxy between each sheet, curing the adhesive to form a stack, placing the stack against a saw and cutting the stack at two opposite ends to form a wedge-shaped panel having an inlet face and an outlet face, and forming at the outlet face a plurality of light redirective elements which direct light incident on the outlet face into a controlled light cone.

Veligdan, James T. (Manorville, NY)

2002-01-01T23:59:59.000Z

335

MEDIA BRIEFING CONFERENCE CALL: Secretary Chu to Host Solar Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

MEDIA BRIEFING CONFERENCE CALL: Secretary Chu to Host Solar Energy MEDIA BRIEFING CONFERENCE CALL: Secretary Chu to Host Solar Energy Conference Call MEDIA BRIEFING CONFERENCE CALL: Secretary Chu to Host Solar Energy Conference Call February 4, 2011 - 12:00am Addthis WASHINGTON -TOMORROW, February 4, 2011, Secretary Steven Chu will join with Richard Swanson, President Emeritus of SunPower Corp., to host a media conference call to announce new funding for solar technology and manufacturing projects. Secretary Chu will also release additional details about the Department's SunShot initiative. WHO: Secretary of Energy Steven Chu Richard Swanson, President Emeritus, SunPower Corp. WHEN: Friday, February 4, 2011 12:45 PM EST HOW: For call-in information, interested media should RSVP to Ebony Meeks at ebony.meeks@hq.doe.gov Media contact(s):

336

EM SSAB Chairs Conference Calls | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SSAB Chairs SSAB Chairs Conference Calls EM SSAB Chairs Conference Calls June 18, 2013 EM SSAB Conference Calls - June 18, 2013 Minutes and highlights of the Environmental Management (EM) Site Specific Advisory Board's (SSAB) Bi-Monthly conference call including Participants, DOE-HQ Representatives, Opening Remarks, Program, Chairs' Meeting, and Around the Complex updates and Closing Remarks. February 19, 2013 EM SSAB Conference Calls - February 19, 2013 Minutes and highlights of the Environmental Management (EM) Site Specific Advisory Board's (SSAB) Bi-Monthly conference call including Participants, DOE-HQ Representatives, Opening Remarks, Program, Chairs' Meeting, and Around the Complex updates and Closing Remarks. December 18, 2012 EM SSAB Conference Calls - December 18, 2012

337

Mesa Energy formerly called Mesa Environmental Sciences | Open Energy  

Open Energy Info (EERE)

called Mesa Environmental Sciences called Mesa Environmental Sciences Jump to: navigation, search Name Mesa Energy (formerly called Mesa Environmental Sciences) Place Pennsylvania Zip 19355 Sector Services, Solar Product Environmental and energy services company focused on solar PV design and installation. References Mesa Energy (formerly called Mesa Environmental Sciences)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Mesa Energy (formerly called Mesa Environmental Sciences) is a company located in Pennsylvania . References ↑ "Mesa Energy (formerly called Mesa Environmental Sciences)" Retrieved from "http://en.openei.org/w/index.php?title=Mesa_Energy_formerly_called_Mesa_Environmental_Sciences&oldid=34874

338

Cross-Laminated Timber Panels | Open Energy Information  

Open Energy Info (EERE)

Laminated Timber Panels Laminated Timber Panels Jump to: navigation, search TODO: add page breaks/images Cross-Laminated Timer Panels are formed using planed "lamellas" (planed boards from 1" thick x 5"-7" wide) laid and glued using formaldehyde-free, food-grade glue in a vacuum press in alternate layers, at 90 degrees to each other, creating panels that are from 3 to 11 layers thick. These panels form a robust, structurally strong building system that outperforms anything currently available in the USA. Quality control is optimized with the pre-fabrication of the structural panels in an atmospherically controlled facility using computer controlled cutting equipment. State-of-the-art computer aided design programming is transferred directly to the manufacturing process. More information can

339

EnergyPlus Review Panel: Summary of Conclusions  

NLE Websites -- All DOE Office Websites (Extended Search)

EnergyPlus Review Panel: Summary of Conclusions EnergyPlus Review Panel: Summary of Conclusions Speaker(s): Charles S. "Chip" Barnaby Robert Sonderegger Date: May 13, 2010 - 2:00pm Location: 90-3075 A five-member panel of "outsiders" has recently examined the software architecture of DOE's EnergyPlus building energy simulation program with respect to robustness, computational efficiency, extensibility, maintainability, and usability. Two members of the panel will informally present conclusions from that study and then open the floor for discussion of the panel's recommendations. Barnaby is Vice-President of Research at software developer Wrightsoft Corporation in Lexington, MA and is Chair of the Review Panel. He has a B.A. in Engineering and Applied Physics from Harvard University and a M.Arch. from the University of California,

340

Solar Panels to Help Iowa Students Learn About Renewable Energy |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Panels to Help Iowa Students Learn About Renewable Energy Panels to Help Iowa Students Learn About Renewable Energy Solar Panels to Help Iowa Students Learn About Renewable Energy May 10, 2010 - 10:53am Addthis Five Iowa schools will receive rooftop solar panels this summer to help teach students about the technology | File Photo Five Iowa schools will receive rooftop solar panels this summer to help teach students about the technology | File Photo Stephen Graff Former Writer & editor for Energy Empowers, EERE Learning about the sun's power is just as important as harnessing it. New solar panels to be installed on the rooftops of five Iowa middle schools will give students hands-on experience with the technology and help offset some energy costs. "We really want this be an educational component to the schools'

Note: This page contains sample records for the topic "flat panel called" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Flat-Plate Photovoltaic Module Basics | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Module Basics Module Basics Flat-Plate Photovoltaic Module Basics August 20, 2013 - 4:25pm Addthis Flat-plate photovoltaic (PV) modules are made of several components, including the front surface materials, encapsulant, rear surface, and frame. Front Surface Materials The front surface of a flat-plate PV module must have a high transmission in the wavelengths that can be used by the solar cells in the module. For example, for silicon solar cells, the top surface must have high transmission of light with wavelengths from 350 to 1200 nm. Also, reflection from the front surface should be minimal. An antireflection coating added to the top surface can greatly reduce the reflection of sunlight, and texturing of the surface can cause light that strikes the surface to stay within the cells. Unfortunately, these textured

342

Relativistic electromagnetic flat top solitons and their stability  

Science Conference Proceedings (OSTI)

The inclusion of ion response in the study of relativistically intense electromagnetic laser pulse propagation in plasma yields certain distinct varieties of single peak solitonic structures. A flat top slow moving structure (for which the various fields have a flat profile over a wide spatial range) is one such solution. A detailed characterization of these solutions along with the eigen spectrum of their formation in the parameter space has been presented. The evolution of this particular solution is studied in detail with the help of a coupled fluid Maxwell set of equations. The study shows that the flat top solution is unstable. The instability is characterized as the backward Brillouin instability for which the electron quiver velocity plays the role of the effective temperature.

Sundar, Sita; Das, Amita; Saxena, Vikrant; Kaw, Predhiman; Sen, Abhijit [Institute for Plasma Research, Bhat, Gandhinagar-382428 (India)

2011-11-15T23:59:59.000Z

343

Gabbs Alkali Flat Geothermal Area | Open Energy Information  

Open Energy Info (EERE)

Gabbs Alkali Flat Geothermal Area Gabbs Alkali Flat Geothermal Area Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Geothermal Resource Area: Gabbs Alkali Flat Geothermal Area Contents 1 Area Overview 2 History and Infrastructure 3 Regulatory and Environmental Issues 4 Exploration History 5 Well Field Description 6 Geology of the Area 7 Geofluid Geochemistry 8 NEPA-Related Analyses (0) 9 Exploration Activities (2) 10 References Area Overview Geothermal Area Profile Location: Nevada Exploration Region: Walker-Lane Transition Zone Geothermal Region GEA Development Phase: 2008 USGS Resource Estimate Mean Reservoir Temp: Estimated Reservoir Volume: Mean Capacity: Click "Edit With Form" above to add content History and Infrastructure Operating Power Plants: 0 No geothermal plants listed.

344

Compact x-ray source and panel  

SciTech Connect

A compact, self-contained x-ray source, and a compact x-ray source panel having a plurality of such x-ray sources arranged in a preferably broad-area pixelized array. Each x-ray source includes an electron source for producing an electron beam, an x-ray conversion target, and a multilayer insulator separating the electron source and the x-ray conversion target from each other. The multi-layer insulator preferably has a cylindrical configuration with a plurality of alternating insulator and conductor layers surrounding an acceleration channel leading from the electron source to the x-ray conversion target. A power source is connected to each x-ray source of the array to produce an accelerating gradient between the electron source and x-ray conversion target in any one or more of the x-ray sources independent of other x-ray sources in the array, so as to accelerate an electron beam towards the x-ray conversion target. The multilayer insulator enables relatively short separation distances between the electron source and the x-ray conversion target so that a thin panel is possible for compactness. This is due to the ability of the plurality of alternating insulator and conductor layers of the multilayer insulators to resist surface flashover when sufficiently high acceleration energies necessary for x-ray generation are supplied by the power source to the x-ray sources.

Sampayon, Stephen E. (Manteca, CA)

2008-02-12T23:59:59.000Z

345

Dual circuit embossed sheet heat transfer panel  

DOE Patents (OSTI)

A heat transfer panel provides redundant cooling for fusion reactors or the like environment requiring low-mass construction. Redundant cooling is provided by two independent cooling circuits, each circuit consisting of a series of channels joined to inlet and outlet headers. The panel comprises a welded joinder of two full-size and two much smaller partial-size sheets. The first full-size sheet is embossed to form first portions of channels for the first and second circuits, as well as a header for the first circuit. The second full-sized sheet is then laid over and welded to the first full-size sheet. The first and second partial-size sheets are then overlaid on separate portions of the second full-sized sheet, and are welded thereto. The first and second partial-sized sheets are embossed to form inlet and outlet headers, which communicate with channels of the second circuit through apertures formed in the second full-sized sheet. 6 figs.

Morgan, G.D.

1984-02-21T23:59:59.000Z

346

Dual circuit embossed sheet heat transfer panel  

DOE Patents (OSTI)

A heat transfer panel provides redundant cooling for fusion reactors or the like environment requiring low-mass construction. Redundant cooling is provided by two independent cooling circuits, each circuit consisting of a series of channels joined to inlet and outlet headers. The panel comprises a welded joinder of two full-size and two much smaller partial-size sheets. The first full-size sheet is embossed to form first portions of channels for the first and second circuits, as well as a header for the first circuit. The second full-sized sheet is then laid over and welded to the first full-size sheet. The first and second partial-size sheets are then overlaid on separate portions of the second full-sized sheet, and are welded thereto. The first and second partial-sized sheets are embossed to form inlet and outlet headers, which communicate with channels of the second circuit through apertures formed in the second full-sized sheet.

Morgan, Grover D. (St. Louis County, MO)

1984-01-01T23:59:59.000Z

347

Training Topic Group Conference Call February 17, 1999 PARTICIPANTS ON CALL:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

February 17, 1999 February 17, 1999 PARTICIPANTS ON CALL: Tom Hughes Bill Ruting Deena LaRue Randy Small Ella McNeil Wilbur Smith Tammy Ottmer Gordon Veerman Jim Price STATUS OF TRAINING MODULES: The training modules are still in need of an official name. Group members are requested to submit suggested titles for these modules by next week. In developing the title, keep in mind these three key words: transportation, radiological, module. Any logo ideas will also be welcome. Tom Clawson, Eastern Idaho Technical College, has revised the first five modules. Jim Price will review, edit, and forward copies to the Topic Group members for review. The Specialist module is on hold and will be the last module to be completed. Chief Bill Ruting, LaGrange, Illinois Fire Department, has taken the lead to develop the two Incident Command modules, Response and Recovery Phases. Drafts of these

348

Flat Glass Manufacturing Plant EPI | ENERGY STAR Buildings & Plants  

NLE Websites -- All DOE Office Websites (Extended Search)

Flat Glass Manufacturing Plant EPI Flat Glass Manufacturing Plant EPI Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager Products and purchasing Recognition Research and reports Service and product provider (SPP) resources Success stories Target Finder

349

Benchmarking and Performance Improvement at Rocky Flats Environmental Technology Site  

Science Conference Proceedings (OSTI)

The Rocky Flats Environmental Technology Site (RFETS) has initiated a major work process improvement campaign using the tools of formalized benchmarking and streamlining. This paper provides insights into some of the process improvement activities performed at Rocky Flats from November 1995 through December 1996. It reviews the background, motivation, methodology, results, and lessons learned from this ongoing effort. The paper also presents important gains realized through process analysis and improvement including significant cost savings, productivity improvements, and an enhanced understanding of site work processes.

Elliott, C. [Kaiser-Hill Co., LLC, Golden, CO (United States)], Doyle, D. [USDOE Rocky Flats Office, Golden, CO (United States)], Featherman, W.D. [Project Performance Corp., Sterline, VA (United States)

1997-12-31T23:59:59.000Z

350

Intergovernmental Panel on Climate Change (IPCC) Special Report...  

NLE Websites -- All DOE Office Websites (Extended Search)

Intergovernmental Panel on Climate Change (IPCC) Special Report on Managing the Risks of Extreme Events and Disasters to Advance Climate Change Adaptation (SREX) Print E-mail...

351

Intergovernmental Panel on Climate Change (IPCC), Working Group...  

NLE Websites -- All DOE Office Websites (Extended Search)

Intergovernmental Panel on Climate Change (IPCC), Working Group 1, 1994: Modelling Results Relating Future Atmospheric CO2 Concentrations to Industrial Emissions DB1009 data Data...

352

Energy Materials Blue Ribbon Panel Releases Vision Report  

Science Conference Proceedings (OSTI)

Jun 22, 2010 ... Said Blue Ribbon Panel member Michael J. Dolan, senior vice ... Solar technology, while being designated as a moderately important MSE ...

353

"Increasing Solar Panel Efficiency And Reliability By Evaporative...  

NLE Websites -- All DOE Office Websites (Extended Search)

Increasing Solar Panel Efficiency And Reliability By Evaporative Cooling" Inventors..--.. Lewis Meixler, Charles Gentile, Patricia Hillyer, Dylan Carpe, Jason Wang, Caroline Brooks...

354

DOE Hydrogen and Fuel Cells Program: Advisory Panels  

NLE Websites -- All DOE Office Websites (Extended Search)

Contacts Background Budget Timeline Program Activities Advisory Panels Hydrogen and Fuel Cell Technical Advisory Committee National Research Council External Coordination U.S....

355

Energy Materials Blue Ribbon Panel Report June 2010 - TMS  

Science Conference Proceedings (OSTI)

Jun 22, 2010 ... The Energy Materials Blue Ribbon Panel convened by TMS has released “ Linking Transformational Materials and Processing for an Energy- ...

356

Study of Alternative Approaches for Transite Panel Removal  

Energy.gov (U.S. Department of Energy (DOE))

Bechtel Jacobs Company LLC (BJC) assembled an experienced team from both sites to evaluate both the manual and mechanical methods of transite panel removal.

357

Smart panels with SISO or MIMO velocity feedback control systems  

Science Conference Proceedings (OSTI)

This paper summarizes and contrasts the research work that has been carried out on two types of smart panels with ASAC control systems: first

2003-01-01T23:59:59.000Z

358

Power and Energy also called Power Energy | Open Energy Information  

Open Energy Info (EERE)

also called Power Energy also called Power Energy Jump to: navigation, search Name Power and Energy (also called Power+Energy) Place Bucks Country, Pennsylvania Sector Hydro, Hydrogen Product Power+Energy develops micro-channel hydrogen purifiers, hydrogen separators, and fuel processing technology. The company has signed development deals with the US Navy and has received USD 2.3m from the Defense Department for its research. References Power and Energy (also called Power+Energy)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Power and Energy (also called Power+Energy) is a company located in Bucks Country, Pennsylvania . References ↑ "Power and Energy (also called Power+Energy)"

359

Windy Flats(3Q09 portion) | Open Energy Information  

Open Energy Info (EERE)

Windy Flats(3Q09 portion) Windy Flats(3Q09 portion) Jump to: navigation, search Name Windy Flats(3Q09 portion) Facility Windy Flats(3Q09 portion) Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner Cannon Power Group Developer Cannon Power Group Location North shore of Columbia River Coordinates 45.699622°, -120.774622° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":45.699622,"lon":-120.774622,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

360

Certification and verification for calmac flat plate solar collector  

DOE Green Energy (OSTI)

This document contains information used in the certification and verification of the Calmac Flat Plate Collector. Contained are such items as test procedures and results, information on materials used, Installation, Operation, and Maintenance Manuals, and other information pertaining to the verification and certification.

Not Available

1978-01-27T23:59:59.000Z

Note: This page contains sample records for the topic "flat panel called" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Site wide integration of the Rocky Flats closure project  

Science Conference Proceedings (OSTI)

The prime contractor for the Rocky Flats Closure Project (RFCP), Kaiser-Hill, in concert with the Department of Energy--Rocky Flats Field Office (DOE-RFFO) has applied a fully integrated, life-cycle, critical path schedule and work planning system to manage the work that is required to close the Site. The closure of the Site is complex, in that it houses over 700 facilities, 19,600 kilograms of Special Nuclear Material (Plutonium and Uranium), and over 160,000 cubic meters of Transuranic, Low Level, and Hazardous Waste. The deactivation, decommissioning, decontaminating, and demolition of this large number of facilities, while at the same time accommodating difficult on-going activities, significantly increases the sophistication required in the planning process. The Rocky Flats team has overcome these difficulties by establishing a money oriented critical path process, to provide a least-cost avenue to supporting on-going activities and a line-of-balance process for production oriented activities. These processes, when integrated with a typical activity-based project planning system, guide the way to the shortest and most cost-effective course for the closure of the Rocky Flats Site.

Burdge, L.F.; Golan, P.

1998-06-01T23:59:59.000Z

362

Integration using invariant operators:Conformally flat radiation metrics  

E-Print Network (OSTI)

A new method is presented for obtaining the general conformally flat radiation metric by using the differential operators of Machado Ramos and Vickers (a generalisation of the GHP operators) which are invariant under null rotations and spin and boosts. The solution is found by constructing involutive tables of these derivatives applied to the quantities which arise in the Karlhede classification of metrics.

S. B. Edgar; J. A. Vickers

1998-08-05T23:59:59.000Z

363

Mass-capacity inequalities for conformally flat manifolds with boundary  

E-Print Network (OSTI)

In this paper we prove a mass-capacity inequality and a volumetric Penrose inequality for conformally flat manifolds, in arbitrary dimensions. As a by-product of the proofs, capacity and Aleksandrov-Fenchel inequalities for mean-convex Euclidean domains are obtained. For each inequality, the case of equality is characterized.

Alexandre Freire; Fernando Schwartz

2011-07-07T23:59:59.000Z

364

Energy Physics Advisory Panel met at Fermilab  

NLE Websites -- All DOE Office Websites (Extended Search)

Charged with recommending how best to Charged with recommending how best to position the U.S. particle physics community for new facilities beyond CERN's Large Hadron Collider, a subpanel of the High- Energy Physics Advisory Panel met at Fermilab August 14-16 to hear presentations on such topics as the research agenda for Fermilab's Run II, the complicated upgrades to the CDF and DZero detectors and research on future accelerators. Volume 20 Friday, August 29, 1997 Number 17 Photo by Reidar Hahn HEPAP Looks into the Future HEPAP subpanel meets at Fermilab to chart the future of high-energy physics in the U.S. by Donald Sena and Sharon Butler, Office of Public Affairs In a letter to HEPAP, Martha Krebs, Director of the U.S. Department of Energy's Office of Energy Research, directed the subpanel to "recommend a scenario for an

365

Federal Technical Capability Panel Contacts list  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 1 U. S. Department of Energy and National Nuclear Security Administration Federal Technical Capability Panel Organization Name Telephone Fax E-Mail FTCP CHAIR Chair (DOE/NTC) Karen L. Boardman (505) 845-6444 (505) 845-6079 kboardman@ntc.doe.gov FTCP Deputy Dave Chaney (505) 845-4300 (505) 845-4879 david.chaney@nnsa.doe.gov FTCP Technical Standards Mgr. Jeanette Yarrington (301) 903-7030 (301) 903-3445 Jeanette.Yarrington@hq.doe.gov FTCP Coordinator Patricia Parrish (505) 845-4057 (505) 284-7057 patricia.parrish@nnsa.doe.gov FTCP Agents DOE Headquarters Chief of Nuclear Safety (CNS) Richard Lagdon (202) 586-9471 (202) 586-5533 Chip.Lagdon@eh.doe.gov Office of Health, Safety & Security Pat Worthington (301) 903-6929 (301) 903-3445 pat.worthington@hq.doe.gov

366

DOE Transportation Protocols Topic Group Conference Call Summary May 13,  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Conference Call Summary May 13, Conference Call Summary May 13, 1999 The Transportation External Coordination Working Group (TEC/WG) Protocols Topic Group held a conference call on May 13, 1999, to discuss the status of U.S. Department of Energy (DOE) transportation protocols currently under development, and related issues. Participants on the call included: Mona Williams, DOE National Transportation Program-Albuquerque; Ken Niles, Oregon representative, Western Interstate Energy Board; Phillip Paull, Council of State Governments-Northeastern Conference; Ron Ross, Western Governors' Association; Lisa Sattler, Council of State Governments-Midwestern Office; Alex Thrower, Urban Energy & Transportation Corporation (UETC); and Elissa Turner, DOE-Office of Civilian Radioactive Waste Management.

367

TEC Tribal Issues Topic Group Conference Call Notes December...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Elissa Turner (DOERW), Heather Westra (Prairie Island Indian Community) and Catherine Volk (DOEEM). This conference call addressed a number of issues and upcoming events....

368

NREL: Education Programs - Last Call: Illinois Wind for Schools...  

NLE Websites -- All DOE Office Websites (Extended Search)

Last Call: Illinois Wind for Schools Program Accepting Applications February 25, 2013 Now in its second year, the Illinois Wind for Schools (ILWFS) program is accepting...

369

NREL: Wind Research - Last Call: Illinois Wind for Schools Program...  

NLE Websites -- All DOE Office Websites (Extended Search)

Last Call: Illinois Wind for Schools Program Accepting Applications February 25, 2013 Now in its second year, the Illinois Wind for Schools (ILWFS) program is accepting...

370

Program Sustainability Peer Exchange Call: Transitioning to a...  

NLE Websites -- All DOE Office Websites (Extended Search)

January 17, 2013 Program Sustainability Peer Exchange Call: Transitioning to a Utility Funded Program Environment: What Do I Need To Know? Utility Funded Programming: What Do You...

371

Untrained Forward Observer (UFO) translator for call for fire .  

E-Print Network (OSTI)

??Many observers need indirect fire but are not proficient in Call for Fire, the procedure used to request indirect fire. To alleviate this, we propose… (more)

King, Regan R.

2013-01-01T23:59:59.000Z

372

Research Call to DOE/Federal Laboratories: Technical Support...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

to DOEFederal Laboratories: Technical Support for Interconnection-Level Electric Infrastructure Planning RC-BM-2010; Due May 3, 2010. Research Call to DOEFederal Laboratories:...

373

TEC Working Group Topic Groups Rail Conference Call Summaries...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Radiation Monitoring Subgroup TEC Working Group Topic Groups Rail Conference Call Summaries Radiation Monitoring Subgroup Radiation Monitoring Subgroup October 11, 2007 More...

374

President Carter Calls for Department of Energy | National Nuclear...  

National Nuclear Security Administration (NNSA)

Carter Calls for Department of Energy | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency...

375

TEC Working Group Topic Groups Rail Conference Call Summaries...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Inspections Subgroup TEC Working Group Topic Groups Rail Conference Call Summaries Inspections Subgroup Inspections Subgroup April 6, 2006 February 23, 2006 Draft January 24, 2006...

376

TEC Working Group Topic Groups Rail Conference Call Summaries...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Intermodal Subgroup TEC Working Group Topic Groups Rail Conference Call Summaries Intermodal Subgroup Intermodal Subgroup July 17, 2007 September 19, 2007 December 12, 2007 More...

377

TEC Working Group Topic Groups Rail Conference Call Summaries...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

TRAGIS Subgroup TEC Working Group Topic Groups Rail Conference Call Summaries TRAGIS Subgroup TRAGIS Subgroup April 11, 2006 More Documents & Publications TEC Working Group Topic...

378

TEC Working Group Topic Groups Rail Conference Call Summaries...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Planning Subgroup TEC Working Group Topic Groups Rail Conference Call Summaries Planning Subgroup Planning Subgroup March 30, 2006 February 15, 2006 Draft...

379

TRIBAL ISSUES TOPIC GROUP CONFERENCE CALL SUMMARY (April 26,  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CONFERENCE CALL SUMMARY (April 26, 2000) Participants: Jessica Alcorn (DOEEM), Kevin Blackwell (DOT), Judith Bradbury (PNL), Stephanie Bush-Goddard (NRC), Kevin Clarke (DOERL),...

380

Minutes: EM SSAB Chairs Budget Conference Call - October 5, 2010  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Budget Conference Call October 5, 2010 Participants Chairs Representatives: Site Support Staff: Idaho R.D. Maynard Nevada Oak Ridge Jeff Miller Kelly Snyder Pete Osborne Paducah...

Note: This page contains sample records for the topic "flat panel called" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Nonconformally flat initial data for binary compact objects  

SciTech Connect

A new method is described for constructing initial data for a binary neutron-star system in quasiequilibrium circular orbit. Two formulations for nonconformally flat data, waveless and near-zone helically symmetric, are introduced; in each formulation, the Einstein-Euler system, written in 3+1 form on an asymptotically flat spacelike hypersurface, is exactly solved for all metric components, including the spatially nonconformally flat potentials, and for irrotational flow. A numerical method applicable to both formulations is explained with an emphasis on the imposition of a spatial gauge condition. Results are shown for solution sequences of irrotational binary neutron-stars with matter approximated by parametrized equations of state that use a few segments of polytropic equations of state. The binding energy and total angular momentum of solution sequences computed within the conformally flat--Isenberg-Wilson-Mathews--formulation are closer to those of the third post-Newtonian (3PN) two point particles up to the closest orbits, for the more compact stars, whereas sequences resulting from the waveless/near-zone helically symmetric formulations deviate from the 3PN curve even more for the sequences with larger compactness. We think it likely that this correction reflects an overestimation in the Isenberg-Wilson-Mathews formulation as well as in the 3PN formula, by {approx}1 cycle in the gravitational-wave phase during the last several orbits. The work suggests that imposing spatial conformal flatness results in an underestimate of the quadrupole deformation of the components of binary neutron-star systems in the last few orbits prior to merger.

Uryu, Koji [Department of Physics, University of the Ryukyus, Senbaru, Nishihara, Okinawa 903-0213 (Japan); Limousin, Francois; Gourgoulhon, Eric [Laboratoire Univers et Theories, UMR 8102 du CNRS, Observatoire de Paris, Universite Paris Diderot, F-92190 Meudon (France); Friedman, John L. [Department of Physics, University of Wisconsin-Milwaukee, P.O. Box 413, Milwaukee, Wisconsin 53201 (United States); Shibata, Masaru [Yukawa Institute for Theoretical Physics, Kyoto University, Kyoto 606-8502 (Japan)

2009-12-15T23:59:59.000Z

382

Microsoft PowerPoint - 16.1400_Panel PMCDP CRB Panel slides final March 4 2011  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Development Program (PMCDP) Peter O'Konski PE, PMP, CCE Facility Policy & Professional Development Office of Engineering and Construction Management Agenda g * Update on the PMCDP Program - Key program updates - Maturing of the program - Challenges - Current statistics Website - Website * Certification Review Board Panel Discussion * Certification Review Board Panel Discussion 3/16/2011 2 Key Program Updates * Process changes * Process changes - Virtual voting for Level 1 and 2 candidates - Reference checks for Level 3 and 4 candidates * Curriculum updates - Changes to PMP® waivers - Course updates - Continuous improvement * Expect to remain static for next 1-2 years p y * Administration - Website updated 3 3/16/2011 Maturing of the Program Maturing of the Program aka: Leadership Matters * Project success is the ultimate goal

383

Proceedings: photovoltaics user review panel. March 6 and 7, 1979  

SciTech Connect

The discussions, recommendations, and conclusions of the Photovoltaics User Review Panel are presented. The purpose of the panel discussions was to determine the Technical Information Dissemination (TID) needs for target audiences, to reach agreement on what informational products could fill these needs and who should produce the materials, and to establish priorities for the need for the TID products.

Carroll, S.

1979-08-01T23:59:59.000Z

384

Integrity Lessons from the WAAS Integrity Performance Panel (WIPP)  

E-Print Network (OSTI)

Integrity Lessons from the WAAS Integrity Performance Panel (WIPP) Todd Walter, Per Enge, Stanford that the integrity requirement would be met, the FAA formed the WAAS Integrity Performance Panel (WIPP). The role of the WIPP is to independently assess the safety of WAAS and to recommend system improvements. To accomplish

Stanford University

385

Infrared NDT methods applied to solar cell and panel characterization  

DOE Green Energy (OSTI)

Infrared nondestructive testing (NDT) methods are described that have a good potential for providing valuable data concerning solar cell or panel characteristics without requiring contact with the photovoltaic device. Preliminary tests with cells and panels were conducted and the infrared NDT results are presented and discussed. (MHR)

Green, D. R.; Olsen, L. C.

1978-10-20T23:59:59.000Z

386

NCAQ Panel Examines Uses and Limitations of Air Quality Models  

Science Conference Proceedings (OSTI)

The results of a 22-member expert panel On dispersion modeling, which was convened by the National Commission on Air Quality in 1979, are reviewed. The panel affirmed the validity of using models in support of air quality regulations. It also ...

Douglas G. Fox; James E. Fairobent

1981-02-01T23:59:59.000Z

387

Rail Topic Group Conference Call Summary September 18th, 1997  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Summary September 18th, 1997 Summary September 18th, 1997 Old Items (1) The OCRWM letter to FRA concerning the authority of states, tribes, and carriers was discussed; OCRWM is still awaiting FRA response. (2) Audrey Adamson (UETC) informed participants that the TEC/WG Planning Committee had discussed and approved TEC/WG membership for a representative from the FRA's State Rail Inspection Program. Ms. Adamson mentioned that this representative changes yearly, but that a representative would be included as a full member in the TEC/WG. (3) Evaluation results from the July, 1997 TEC/WG meeting in Albuquerque were briefly discussed, with the high marks given the rail panel by attendees duly noted. Ms. Adamson told the group that another panel addressing rail issues had been requested for the January, 1998

388

City and County of Denver - Solar Panel Permitting (Colorado) | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Solar Panel Permitting (Colorado) Solar Panel Permitting (Colorado) City and County of Denver - Solar Panel Permitting (Colorado) < Back Eligibility Commercial Construction General Public/Consumer Industrial Low-Income Residential Multi-Family Residential Residential Savings Category Solar Buying & Making Electricity Heating & Cooling Water Heating Program Info State Colorado Program Type Solar/Wind Permitting Standards Provider Department of Development Services Construction, Electrical, Plumbing and Zoning Permits* are required for Photovoltaic (PV) systems installed in the city of Denver. Denver provides same day permit review for most solar panel projects. More complex engineering projects may still be required to go through the Plan Review process. To obtain Zoning Permits for flush mounted solar panels, applicants must

389

Expert Panel: Forecast Future Demand for Medical Isotopes | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Expert Panel: Forecast Future Demand for Medical Isotopes Expert Panel: Forecast Future Demand for Medical Isotopes Expert Panel: Forecast Future Demand for Medical Isotopes The Expert Panel has concluded that the Department of Energy and National Institutes of Health must develop the capability to produce a diverse supply of radioisotopes for medical use in quantities sufficient to support research and clinical activities. Such a capability would prevent shortages of isotopes, reduce American dependence on foreign radionuclide sources and stimulate biomedical research. The expert panel recommends that the U.S. government build this capability around either a reactor, an accelerator or a combination of both technologies as long as isotopes for clinical and research applications can be supplied reliably, with diversity in adequate

390

Diversified Panels Systems: Proposed Penalty (2013-CE-5346) | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Diversified Panels Systems: Proposed Penalty (2013-CE-5346) Diversified Panels Systems: Proposed Penalty (2013-CE-5346) Diversified Panels Systems: Proposed Penalty (2013-CE-5346) February 21, 2013 DOE alleged in a Notice of Proposed Civil Penalty that Diversified Panels Systems, Inc. failed to certify a variety of walk-in cooler or freezer components as compliant with the applicable energy conservation standards. DOE regulations require a manufacturer (which includes importers) to submit reports certifying that its products have been tested and meet the applicable energy conservation standards. This civil penalty notice advises the company of the potential penalties and DOE's administrative process, including the company's right to a hearing. Diversified Panels Systems: Proposed Penalty (2013-CE-5346) More Documents & Publications

391

Kingspan Insulated Panels: Proposed Penalty (2013-CE-5353) | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Kingspan Insulated Panels: Proposed Penalty (2013-CE-5353) Kingspan Insulated Panels: Proposed Penalty (2013-CE-5353) Kingspan Insulated Panels: Proposed Penalty (2013-CE-5353) March 26, 2013 DOE alleged in a Notice of Proposed Civil Penalty that Kingspan Insulated Panels, Inc. failed to certify a variety of walk-in cooler or freezer components as compliant with the applicable energy conservation standards. DOE regulations require a manufacturer (which includes importers) to submit reports certifying that its products have been tested and meet the applicable energy conservation standards. This civil penalty notice advises the company of the potential penalties and DOE's administrative process, including the company's right to a hearing. Kingspan Insulated Panels: Proposed Penalty (2013-CE-5353) More Documents & Publications

392

Memorandum, Safeguards & Security Policy Panels - February 15, 2008 |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Memorandum, Safeguards & Security Policy Panels - February 15, 2008 Memorandum, Safeguards & Security Policy Panels - February 15, 2008 Memorandum, Safeguards & Security Policy Panels - February 15, 2008 February 15, 2008 As outlined in the attached HSS memo, dated December 3,2007, subject: Safeguards and Security Policy Panels, the HSS Office of Security Policy is establishing several new policy panels that will create new opportunities for communication and will include those current active groups that are now effectively promoting cominunications in theirsafeguards and security topical areas. The Office of Health, Safety and Security (HSS) recognizes the importance of well conceived strategies and policies to support and communicate the security posture of the Department. In order for our security policies to

393

Solar Panels Hit Energy Milestone For Potawatomi and Milwaukee | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Panels Hit Energy Milestone For Potawatomi and Milwaukee Panels Hit Energy Milestone For Potawatomi and Milwaukee Solar Panels Hit Energy Milestone For Potawatomi and Milwaukee October 26, 2011 - 10:44am Addthis The Forest County Potawatomi Tribe finishes installing solar panels on a Milwaukee, Wisconsin, administration building. | Photo courtesy of the Forest County Potawatomi Tribe The Forest County Potawatomi Tribe finishes installing solar panels on a Milwaukee, Wisconsin, administration building. | Photo courtesy of the Forest County Potawatomi Tribe Eric Escudero Eric Escudero Senior Public Affairs Specialist & Contractor, Golden Field Office "With the help of Recovery Act funding, clean energy projects across the county are creating skilled jobs, reducing our reliance on fossil fuels and saving consumers money on their energy bills."

394

Who Signed Up for the Do-Not-Call List?  

E-Print Network (OSTI)

the do-not-call list, the realized utility will be: u 1n = vutility approach to model decisions to register with a do-not-call list.utility from alternative events will guide its decision to register with a DNC list.

Varian, Hal; Wallenberg, Fredrik; Woroch, Glenn

2004-01-01T23:59:59.000Z

395

China's Energy Policy: Is anybody really calling the shots?  

E-Print Network (OSTI)

China's Energy Policy: Is anybody really calling the shots? Richard K. Lester and Edward S of Technology. #12;1 CHINA'S ENERGY POLICY: IS ANYBODY REALLY CALLING THE SHOTS? Richard Lester and Edward Steinfeld Massachusetts Institute of Technology January 2006 I. Introduction Surging world energy prices

396

Universal rich presence framework for intelligent call management  

Science Conference Proceedings (OSTI)

Users employ a variety of devices and media to communicate with one another, each with its own peculiar characteristics. Managing several devices and identities is not easy, both for the user as well as for others who wish to call her. Switching devices ... Keywords: call routing, communication technologies, intelligent information management, rich presence, unified communication

Abhishek Prateek; Hridayesh Gupta; Sanjiva Prasad

2010-01-01T23:59:59.000Z

397

PQ Hotline Call of the Month Compendium for 2011  

Science Conference Proceedings (OSTI)

This document is a compilation of twelve power quality (PQ) hotline calls of the month in 2011. Each hotline call presents a problem encountered by a utility customer and attempts to remedy that problem by tapping the PQ resources of the EPRI Power Quality Knowledge program.

2011-12-30T23:59:59.000Z

398

Microsoft PowerPoint - 15.1615_Cost Estimating Panel | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

615Cost Estimating Panel Microsoft PowerPoint - 15.1615Cost Estimating Panel Microsoft PowerPoint - 15.1615Cost Estimating Panel More Documents & Publications Contractor SOW...

399

Atomic Safety and Licensing Board Panel annual report, Fiscal year 1992  

SciTech Connect

In Fiscal Year 1992, the Atomic Safety and Licensing Board Panel (``the Panel``) handled 38 proceedings. The cases addressed issues in the construction, operation, and maintenance of commercial nuclear power reactors and other activities requiring a license from the Nuclear Regulatory Commission. This reports sets out the Panel`s caseload during the year and summarizes, highlights, and analyzes how the wide-ranging issues raised in those proceedings were addressed by the Panel`s judges and licensing boards.

Not Available

1993-09-01T23:59:59.000Z

400

Health Surveillance Outcomes in Former Rocky Flats Radiation Workers  

NLE Websites -- All DOE Office Websites (Extended Search)

Surveillance of Rocky Flats Radiation Workers Surveillance of Rocky Flats Radiation Workers Janice P. Watkins 1 , Elizabeth D. Ellis 1 , F. Joseph Furman 2 , Roger B. Falk 2 , Joe M. Aldrich 2 , and Donna L. Cragle 1 ORAU Technical Report # 2006-0408 1 Oak Ridge Institute for Science and Education, Center for Epidemiologic Research; P.O. Box 117; Oak Ridge, TN 37831-0117 2 Oak Ridge Institute for Science and Education, Center for Epidemiologic Research; 9950 W. 80 th Avenue, Suite 17; Arvada, CO 80005-3914 This report was funded by Department of Energy Environmental Health Division under contract number DE-AC05-00OR22750. Table of Contents List of Figures.................................................................................................................2 List of Tables

Note: This page contains sample records for the topic "flat panel called" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

East Flat Rock, North Carolina: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Flat Rock, North Carolina: Energy Resources Flat Rock, North Carolina: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 35.2801166°, -82.4220631° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":35.2801166,"lon":-82.4220631,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

402

Big Flats, Wisconsin: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Flats, Wisconsin: Energy Resources Flats, Wisconsin: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 44.111913°, -89.8079032° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":44.111913,"lon":-89.8079032,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

403

DOE - Office of Legacy Management -- Rocky Flats Archive  

NLE Websites -- All DOE Office Websites (Extended Search)

Archive Archive Rocky Flats Site, Colorado Key Document Archive All documents are Adobe Acrobat files. pdf_icon NEPA - Rocky Flats Surface Water Configuration Environmental Assessment (EA) Site-Specific Uranium Standards Petition Site Surveillance and Maintenance Reports Quarterly Reports 2013 3rd Quarter 2nd Quarter Overview 1st Quarter Overview 2012 3rd Quarter Overview 2nd Quarter Overview 1st Quarter Overview 2011 3rd Quarter Overview 2nd Quarter Overview 1st Quarter Overview 2010 3rd Ouarter Overview 2nd Ouarter Overview 1st Quarter Overview 2009 1st Quarter Overview 2nd Ouarter Overview 3rd Quarter Overview 2008 1st Quarter Overview 2nd Quarter Overview 3rd Quarter Overview 2007 1st Quarter Overview 2nd Quarter Overview 3rd Quarter Overview 2006

404

Facility overview for commercial application of selected Rocky Flats facilities  

SciTech Connect

The purpose of this Facility Overview is to support the Rocky Flats Local Impacts Initiative`s Request for Interest, to solicit interest from commercial corporations for utilizing buildings 865 and 883, and the equipment contained within each building, for a commercial venture. In the following sections, this document describes the Rocky Flats Site, the buildings available for lease, the equipment within these buildings, the site services available to a tenant, the human resources available to support operations in buildings 865 and 883, and the environmental condition of the buildings and property. In addition, a brief description is provided of the work performed to date to explore the potential products that might be manufactured in Buildings 865 and 883, and the markets for these products.

NONE

1996-11-01T23:59:59.000Z

405

Colorado and the Accelerated Cleanup at Rocky Flats  

SciTech Connect

When the Rocky Flats closure project was declared complete in October 2005, it was the largest environmental cleanup to date. Even more impressive, it was ahead of schedule and well under budget. Several factors combined to produce this success including a performance-based contract with financial incentives, development and application of innovative technologies, and a regulator-backed accelerated approach to the cleanup process. The factor in this success in which the State of Colorado had the largest role was in developing and enforcing the Rocky Flats Cleanup Agreement. In compliance with this agreement, cleanup was accomplished by means of multiple interim actions that led to a comprehensive final decision at the end. A key element that allowed the accelerated cleanup was constant consultation among DOE, its contractor, and the regulators plus collaboration with stakeholders. (authors)

Spreng, C. [Public Health and Environment, Colorado Dept., Denver, CO (United States)

2007-07-01T23:59:59.000Z

406

Actinide solution processing at the Rocky Flats Environmental Technology Site  

SciTech Connect

The Department of Energy (DOE) has prepared an Environmental Assessment (EA), DOE/EA-1039, for radioactive solution removal and processing at Rocky Flats Environmental Technology Site, Golden, Colorado. The proposal for solution removal and processing is in response to independent safety assessments and an agreement with the State of Colorado to remove mixed residues at Rocky Flats and reduce the risk of future accidents. Monthly public meetings were held during the scoping and preparation of the EA. The scope of the EA included evaluations of alternative methods and locations of solution processing. A comment period from February 20, 1995 through March 21, 1995 was provided to the public and the State of Colorado to offer written comment on the EA. Comments were received from the State of Colorado and the U.S. Environmental Protection Agency. A response to the agency comments is included in the Final EA.

NONE

1995-04-01T23:59:59.000Z

407

Development effort of sheet molding compound (SMC) parabolic trough panels  

SciTech Connect

The objectives of the development effort are to: investigate the problems of molding parabolic trough solar reflector panels of sheet molding compound (SMC); develop molding techniques and processes by which silvered glass reflector sheets can be integrally molded into SMC trough panels; provide representative prototype panels for evaluation; and provide information regarding the technical feasibility of molding SMC panels in high volume production. The approach taken to meet the objectives was to design the parabolic panel, fabricate a prototype die, choose an SMC formulation and mold the glass and SMC together into a vertex to rim mirrored panel. The main thrust of the program was to successfully co-mold a mirrored glass sheet with the SMC. Results indicate that mirrored glass sheets, if properly strengthened to withstand the temperature and pressure of the molding process, can be successfully molded with SMC in a single press stroke using standard compression molding techniques. The finalized design of the trough panel is given. The SMC formulation chosen is a low shrink, low profile SMC using 40% by weight one inch chopped glass fibers in a uv stabilized polyester resin matrix. A program to test for the adhesion between mirrored glass sheets and the SMC is discussed briefly. (LEW)

Kirsch, P.A.; Champion, R.L.

1982-01-01T23:59:59.000Z

408

Special Review of the Rocky Flats Closure Project Site  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

April April 2001 Special Review of the Integrated Safety Management ISM OVERSIGHT Table of Contents EXECUTIVE SUMMARY ............................................................................... 1 1.0 INTRODUCTION ...................................................................................... 6 2.0 FOCUSED REVIEW OF THE INTEGRATED WORK CONTROL PROCESS AND LINE MANAGEMENT OVERSIGHT .............................................................................................. 8 2.1 Background ...................................................................................... 8 2.2 Line Management Oversight and Selected Other Management Systems .................................................................... 10 2.3 Rocky Flats Closure Project Integrated Work Control Process

409

MEASURING THE JET POWER OF FLAT-SPECTRUM RADIO QUASARS  

SciTech Connect

We use frequency-dependent position shifts of flat-spectrum radio cores to estimate the kinetic power of active galactic nucleus (AGN) jets. We find a correlation between the derived jet powers and AGN narrow-line luminosity, consistent with the well-known relation for radio galaxies and steep spectrum quasars. This technique can be applied to intrinsically weak jets even at high redshift.

Shabala, S. S.; Santoso, J. S. [School of Mathematics and Physics, University of Tasmania, Private Bag 37, Hobart, TAS 7001 (Australia); Godfrey, L. E. H. [International Centre for Radio Astronomy Research, Curtin University, GPO Box U1987, Perth, Western Australia 6845 (Australia)

2012-09-10T23:59:59.000Z

410

DECOMMISSIONING CHALLENGES AT THE ROCKY FLATS ENVIRONMENTAL TECHNOLOGY SITE  

Science Conference Proceedings (OSTI)

This paper presents a discussion of the demolition of the Building 788 cluster at the Rocky Flats Environmental Technology Site (RFETS) in Golden, Colorado. The Building 788 Cluster was a Resource Conservation and Recovery Act (RCRA) permitted storage facilities and ancillary structures. Topics covered include the methods employed for Project Planning, Regulatory Compliance, Waste Management, Hazard Identification, Radiological Controls, Risk Management, Field Implementation, and Cost Schedule control, and Lessons Learned and Project Closeout.

Dorr, K. A.; Hoover, J.

2002-02-25T23:59:59.000Z

411

Rocky Flats Plant Site Environmental Report: 1993 Highlights  

Science Conference Proceedings (OSTI)

The Rocky Flats Plant Site Environmental Report provides summary information on the plant`s environmental monitoring programs and the results recorded during 1993. The report contains a compliance summary, results of environmental monitoring and other related programs, a review of environmental remediation activities, information on external gamma radiation dose monitoring, and radiation dose estimates for the surrounding population. This section provides an overview of these topics and summarizes more comprehensive discussions found in the main text of this annual report.

Not Available

1993-12-31T23:59:59.000Z

412

The Xi-transform for conformally flat space-time  

E-Print Network (OSTI)

The Xi-transform is a new spinor transform arising naturally in Einstein's general relativity. Here the example of conformally flat space-time is discussed in detail. In particular it is shown that for this case, the transform coincides with two other naturally defined transforms: one a two-variable transform on the Lie group SU(2, C), the other a transform on the space of null split octaves. The key properties of the transform are developed.

George Sparling

2006-12-01T23:59:59.000Z

413

Summary of SLAC'S SEY Measurement On Flat Accelerator Wall Materials  

E-Print Network (OSTI)

The electron cloud effect (ECE) causes beam instabilities in accelerator structures with intense positively charged bunched beams. Reduction of the secondary electron yield (SEY) of the beam pipe inner wall is effective in controlling cloud formation. We summarize SEY results obtained from flat TiN, TiZrV and Al surfaces carried out in a laboratory environment. SEY was measured after thermal conditioning, as well as after low energy, less than 300 eV, particle exposure.

F. Le Pimpec; R. E. Kirby; F. K. King; M. Pivi

2007-11-09T23:59:59.000Z

414

Law for a Flat World: Legal Infrastructure and the New Economy  

E-Print Network (OSTI)

a transformation of our legal  infrastructure itself.    for a Flat World:  Legal Infrastructure and the New Economy for a Flat World:  Legal Infrastructure and the New Economy 

Hadfield, Gillian K

2010-01-01T23:59:59.000Z

415

Dynamics of Flat Bunches with Second Harmonic RF  

Science Conference Proceedings (OSTI)

We investigate the dynamics of longitudinally flat bunches created with a second harmonic cavity in a high energy collider. We study Landau damping in a second harmonic cavity with analytical and numerical methods. The latter include particle tracking and evolution of the phase space density. The results are interpreted in the context of possible application to the LHC. A possible path to a luminosity upgrade at the LHC is through the creation of longitudinally flat bunches. They can increase the luminosity roughly by 40% when the beam intensities are at the beam-beam limit. Lower momentum spread which can reduce backgrounds and make collimation easier as well lower peak fields which can mitigate electron cloud effects are other advantages. Use of a second harmonic rf system is a frequently studied method to create such flat bunches. Here we consider some aspects of longitudinal dynamics of these bunches in the LHC at top energy. First we consider intensity limits set by the loss of Landau damping against rigid dipole oscillations. Next we describe numerical simulations using both particle tracking and evolution of the phase space density. These simulations address the consequences of driving a bunch at a frequency that corresponds to the maximum of the synchrotron frequency.

Sen, Tanaji; /Fermilab; Bhat, Chandra; /Fermilab; Kim, Hyung Jin; /Fermilab; Ostiguy, Jean-Francois; /Fermilab

2010-05-01T23:59:59.000Z

416

March 29, 2011, Federal Technical Capabilities Panel Face-to-Face Meeting - FY 2011 Operational Plan Goals Status for Goal 2  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Functional Area Qualification Standards Enhancements Functional Area Qualification Standards Enhancements Deborah Monette, Champion Status: â—¦ Developed Action Plan â—¦ Conducted Initial Conference Call Next Steps: Next Steps: â—¦ Identify viable qualification paths (4/15) Staged qualification from Entry to Expert â—¦ Revise "Expert" definition in FAQS' (4/15) Knowledge and practical experience based â—¦ Produce qualification path plan for FTCP Agent â—¦ Produce qualification path plan for FTCP Agent comment/approval (7/30) Status: â—¦ Action Plan submitted for Panel approval â—¦ Brief Panel on Human Factors Engineering (3/29) Next Steps: Next Steps: â—¦ Identify competencies and supporting knowledge and skills related to HFE for selected TQP functional areas (5/30) â—¦ Panel approve HFE competencies (7/30)

417

Automatic ranging circuit for a digital panel meter  

DOE Patents (OSTI)

This invention relates to a range changing circuit that operates in conjunction with a digital panel meter of fixed sensitivity. The circuit decodes the output of the panel meter and uses that information to change the gain of an input amplifier to the panel meter in order to insure that the maximum number of significant figures is always displayed in the meter. The circuit monitors five conditions in the meter and responds to any of four combinations of these conditions by means of logic elements to carry out the function of the circuit.

Mueller, Theodore R. (Oak Ridge, TN); Ross, Harley H. (Oak Ridge, TN)

1976-01-01T23:59:59.000Z

418

The US Department of Energy`s facility reuse at the Rocky Flats Environmental Technology Site  

Science Conference Proceedings (OSTI)

This audit was initiated to determine whether the Rocky Flats Environmental Technology Site was maximizing its reuse of excess facilities.

NONE

1998-08-01T23:59:59.000Z

419

Press Conference Call Tomorrow: Agriculture Secretary Vilsack and Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Press Conference Call Tomorrow: Agriculture Secretary Vilsack and Press Conference Call Tomorrow: Agriculture Secretary Vilsack and Energy Secretary Chu to Discuss Efforts to Reduce U.S. Oil Dependence Press Conference Call Tomorrow: Agriculture Secretary Vilsack and Energy Secretary Chu to Discuss Efforts to Reduce U.S. Oil Dependence May 4, 2011 - 12:00am Addthis WASHINGTON - TOMORROW, May 5, 2011, Agriculture Secretary Tom Vilsack and Energy Secretary Steven Chu will host a media conference call to highlight Obama Administration efforts to move the nation towards a clean energy future and reduce America's dependence on imported oil. Secretaries Vilsack and Chu will be announcing biomass research and development grants to the following states: Florida, Hawaii, Kansas, Kentucky, Massachusetts, Montana, New Jersey, and South Carolina.

420

Research Call to DOE/Federal Laboratories: Technical Support for  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Research Call to DOE/Federal Laboratories: Technical Support for Research Call to DOE/Federal Laboratories: Technical Support for Interconnection-Level Electric Infrastructure Planning RC-BM-2010; Due May 3, 2010. Research Call to DOE/Federal Laboratories: Technical Support for Interconnection-Level Electric Infrastructure Planning RC-BM-2010; Due May 3, 2010. The entities that DOE has selected under the American Recovery and Reinvestment Act to participate in the Interconnection Transmission Planning Activity will perform challenging and important analyses and collaboratively develop much-needed long-term-transmission plans. They do, however, need research support and technical assistance on a variety of key subjects. The fundamental purpose of this Research Call was to invite the National Laboratories to indicate their interest, understanding, and

Note: This page contains sample records for the topic "flat panel called" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Abraham Calls on Global Community to Aggressively Address Nuclear  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Abraham Calls on Global Community to Aggressively Address Nuclear Abraham Calls on Global Community to Aggressively Address Nuclear Nonproliferation Abraham Calls on Global Community to Aggressively Address Nuclear Nonproliferation January 13, 2005 - 9:49am Addthis WASHINGTON, DC - In a lunchtime speech to the Council on Foreign Relations in Washington, DC, Energy Secretary Spencer Abraham called on the global community to join in implementing a comprehensive nuclear nonproliferation strategy to address 21st century challenges. Outlining his vision for dealing with constantly evolving proliferation threats in an age of terrorism, Secretary Abraham said the international community must play a greater role in future efforts. "Terrorists have struck not just Washington, New York, Moscow, and Beslan," he said. "The challenge of confronting terrorism falls to every nation. .

422

ARPA-E Issues Open Call for Transformational Energy Technologies |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ARPA-E Issues Open Call for Transformational Energy Technologies ARPA-E Issues Open Call for Transformational Energy Technologies ARPA-E Issues Open Call for Transformational Energy Technologies March 2, 2012 - 2:31pm Addthis Washington, D.C. - Today, the Advanced Research Projects Agency - Energy (ARPA-E) issued a $150 million funding opportunity open to all transformational energy technologies to support the Obama Administration's all-of-the-above approach to solving our nation's most pressing energy challenges. This Open Funding Opportunity Announcement is a call to our country's brightest scientists, engineers and entrepreneurs to propose early-stage research projects that would not otherwise be able to attract private investment, but could lead to breakthrough energy technologies. This is the second open funding opportunity released under

423

ARPA-E Issues Open Call for Transformational Energy Technologies |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Issues Open Call for Transformational Energy Technologies Issues Open Call for Transformational Energy Technologies ARPA-E Issues Open Call for Transformational Energy Technologies March 2, 2012 - 2:31pm Addthis Washington, D.C. - Today, the Advanced Research Projects Agency - Energy (ARPA-E) issued a $150 million funding opportunity open to all transformational energy technologies to support the Obama Administration's all-of-the-above approach to solving our nation's most pressing energy challenges. This Open Funding Opportunity Announcement is a call to our country's brightest scientists, engineers and entrepreneurs to propose early-stage research projects that would not otherwise be able to attract private investment, but could lead to breakthrough energy technologies. This is the second open funding opportunity released under

424

Secretary Bodman Tours Refinery and Calls for More Domestic Refining  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Tours Refinery and Calls for More Domestic Tours Refinery and Calls for More Domestic Refining Capacity Secretary Bodman Tours Refinery and Calls for More Domestic Refining Capacity May 18, 2006 - 10:43am Addthis Highlights President Bush's Four-Point Plan to Combat High Energy Prices PORT ARTHUR, TX - Secretary of Energy Samuel W. Bodman today renewed the call for expanded oil refining capacity in the United States and discussed additional steps the Department of Energy (DOE) is taking to prepare for the upcoming hurricane season. Secretary Bodman made the statements after touring the Motiva Refinery in Port Arthur, Texas. "We need a more robust energy sector; and one way to do that is to strengthen and expand our domestic oil refining capacity. We're hopeful that Motiva will continue to work to expand their capacity to 600,000

425

Training Topic Group Conference Call August 26, 1997  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

August 26, 1997 August 26, 1997 Conference call participants: Gordon Veerman Steve White Dale Petroff JD Murray Clark Hyder JoAnne Hazen Scott Solomon Don Flater Conference call began with Clark Hyder reviewing the agenda. Discussion began with Old Business. THe draft JTA and the Job Analysis Matrix (drafted August 11, 1997) were discussed. Gordon Veerman had received comments on the JTA from Bill Ruting that Clark had not seen, so these comments were to be faxed to Clark after the call. The following discussion comments were noted during the call: 1. Change "victims" to "patients" in the draft JTA. 2. Gordon Veerman--What is a "qualified responder"? (In discussion it was agreed that jurisdictions qualify their own responders)

426

Transportation Protocols Working Group First Conference Call March 1, 1999  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Protocols Working Group First Conference Call March 1, 1999 Protocols Working Group First Conference Call March 1, 1999 Conference Call Summary The first conference call of the Transportation External Coordination Working Group (TEC/WG) DOE Transportation Protocols Working Group was held at 3:00 p.m. Eastern time on Monday March 1, 1999. The session was led by Mona Williams, DOE/NTP-Albuquerque. Other participants included Bill Lemeshewsky, DOE/RW; Ellen Ott, DOE/GC; Elizabeth Helvey, JK Research Associates; Chris Wells, SSEB; Lisa Sattler, CSG-MW, Elissa Turner, DOE/RW; Chris Wentz, New Mexico; Carl Guidice, DOE/EM; Jim Cruickshank, DOE/EM, Elmer Naples, DOE/NR; Fred Butterfield, DOE/EM; and Alex Thrower, UETC. Ms. Williams first indicated that notes from the Jacksonville meeting had been prepared and circulated for comment. She asked if there were

427

Press Conference Call Tomorrow: Agriculture Secretary Vilsack and Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Press Conference Call Tomorrow: Agriculture Secretary Vilsack and Press Conference Call Tomorrow: Agriculture Secretary Vilsack and Energy Secretary Chu to Discuss Efforts to Reduce U.S. Oil Dependence Press Conference Call Tomorrow: Agriculture Secretary Vilsack and Energy Secretary Chu to Discuss Efforts to Reduce U.S. Oil Dependence May 4, 2011 - 12:00am Addthis WASHINGTON - TOMORROW, May 5, 2011, Agriculture Secretary Tom Vilsack and Energy Secretary Steven Chu will host a media conference call to highlight Obama Administration efforts to move the nation towards a clean energy future and reduce America's dependence on imported oil. Secretaries Vilsack and Chu will be announcing biomass research and development grants to the following states: Florida, Hawaii, Kansas, Kentucky, Massachusetts, Montana, New Jersey, and South Carolina.

428

President Reagan Calls for a National Spent Fuel Storage Facility |  

National Nuclear Security Administration (NNSA)

Reagan Calls for a National Spent Fuel Storage Facility | Reagan Calls for a National Spent Fuel Storage Facility | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > About Us > Our History > NNSA Timeline > President Reagan Calls for a National Spent ... President Reagan Calls for a National Spent Fuel Storage Facility October 08, 1981

429

Senior DOE Official to Host Press Call on Electricity Advisory...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

15, 2009 - 5:39pm Addthis WASHINGTON- On Thursday, January 15th 2009, the Assistant Secretary for Electricity Delivery and Energy Reliability will host a call with the...

430

RePower Bainbridge "Final Boarding Call" Event Results  

NLE Websites -- All DOE Office Websites (Extended Search)

This story is just one example of how RePower's "Final Boarding Call" helped homeowners and our partners. By the end of this one-day event, Kitsap Credit Union and Puget...

431

Abraham Calls on Global Community to Aggressively Address Nuclear...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

of the IAEA and NPT have been called into question by developments in North Korea and Iran, making it clear that the process of the IAEA must be revamped and the NPT...

432

PQ Hotline Call of the Month Compendium 2013  

Science Conference Proceedings (OSTI)

This document is a compilation of twelve power quality (PQ) hotline calls of the month in 2013. Each hotline call presents a problem encountered by a utility customer and attempts to remedy that problem by tapping the PQ resources of the EPRI Power Quality Knowledge program.The EPRI Power Quality Knowledge program provides a wealth of resources in well-designed, readable, and accessible formats. Paramount among these are documents covering a wide range of PQ topics, written not only for ...

2013-12-23T23:59:59.000Z

433

Advanced Reactor Concepts Technical Review Panel Report | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advanced Reactor Concepts Technical Review Panel Report Advanced Reactor Concepts Technical Review Panel Report Advanced Reactor Concepts Technical Review Panel Report This report documents the establishment of a technical review process and the findings of the Advanced Reactor Concepts (ARC) Technical Review Panel (TRP).1 The intent of the process is to identify R&D needs for viable advanced reactor concepts in order to inform DOE-NE R&D investment decisions. A goal of the process is to facilitate greater engagement between DOE and industry. The process involved establishing evaluation criteria, conducting a pilot review, soliciting concept inputs from industry entities, reviewing the concepts by TRP members and compiling the results. The eight concepts received from industry spanned a range of reactor types

434

CDM Accreditation Panel CDM AP | Open Energy Information  

Open Energy Info (EERE)

CDM Accreditation Panel CDM AP CDM Accreditation Panel CDM AP Jump to: navigation, search Name CDM Accreditation Panel (CDM-AP) Place Bonn, Germany Zip 53153 Product The CDM accreditation panel (CDM-AP) prepares the decision making of the Executive Board in accordance with the procedure for accrediting operational entities. Coordinates 50.7323°, 7.101695° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":50.7323,"lon":7.101695,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

435

Total System Performance Assessment Peer Review Panel | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Total System Performance Assessment Peer Review Panel Total System Performance Assessment Peer Review Panel Total System Performance Assessment Peer Review Panel Total System Performance Assessment (TSPA) Peer Review Panel for predicting the performance of a repository at Yucca Mountain. TSPA First Interim Report - June 20, 1997 TSPA Second Interim Report - December 12, 1997 TSPA Third Interim Report - March, 1998 TSPA Final Report - February 11, 1999 Joint NEA-IAEA International Peer Review of the Yucca Mountain Site Characterization Project's Total System Performance Assessment Supporting the Site Recommendation Process - December, 2001 More Documents & Publications Yucca Mountain Science and Engineering Report TSPA Model Development and Sensitivity Analysis of Processes Affecting Performance of a Salt Repository for Disposal of Heat-Generating Nuclear

436

Study of Alternative Approaches for Transite Panel Removal  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

East Tennessee Technology Park Tennessee Washington Study of Alternative Approaches for Transite Panel Removal Challenge Large facilities operated by the U.S. Department of Energy (DOE) such as the Gaseous Diffusion Plant at Oak Ridge, TN and the former processing facilities at Hanford, WA are paneled entirely with transite siding (an early form of cement composite drywall panel containing up to 50% asbestos). Asbestos removal raises important worker safety issues. The panels must be treated as non-friable asbestos (Category II) with the potential of becoming friable if broken or crushed. Asbestos is considered friable if, when dry, it can be crumbled, pulverized or reduced to powder by hand pressure. These facilities comprise millions of square feet of transite which must be

437

PANEL OP CONSULTrnS MEETING ON RULISON  

Office of Legacy Management (LM)

PANEL OP CONSULTrnS MEETING ON RULISON PANEL OP CONSULTrnS MEETING ON RULISON . - . . .. W V E Y GAP DAM) .. . . .. . N E V m OPERATIONS OFFICE Reported By: ( 2 - I / RTiXN0T.S ELECTRICAL U. ENGINEERING CO., INC., J 4 - .I, / I i Q b OFFICE OF COORDINATOR-BOARDS & PANELS This page intentionally left blank S.GETY PANEL 0 7 CC'_

438

EERE Roofus' Solar and Efficient Home: Solar Panels  

NLE Websites -- All DOE Office Websites (Extended Search)

of Roofus, a golden retriever, sitting in front of three black, rectangular solar panels. When you turn on a light in your home, electricity flows through wires up to...

439

Obama Administration Announces Plans to Install New Solar Panels...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

By installing solar panels on their homes, consumers are able to effectively lock in the price of electricity they will pay in the years ahead, acting as an insulator against...

440

Information tracking and sharing in organic photovoltaic panel manufacturing  

E-Print Network (OSTI)

The MIT MEng team of four worked with Konarka Technologies, a world leading organic solar panel manufacturer, on production tracking and analysis as well as various operational improvement projects. MIT's collaborative ...

Gong, Ming, M. Eng. Massachusetts Institute of Technology

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "flat panel called" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Intergovernmental Panel on Climate Change (IPCC) Special Report...  

NLE Websites -- All DOE Office Websites (Extended Search)

Intergovernmental Panel on Climate Change (IPCC) Special Report on Renewable Energy Sources and Climate Change Mitigation Print E-mail Introduction As part of the U.S. Government...

442

Discrete, recursive supply chain model for solar panel manufacturing  

E-Print Network (OSTI)

A computer model to optimize global expansion of the production of solar panels is presented. The model is modular, extensible, and fast compared to existing specialized optimization software which use integer linear ...

Páez, Daýan

2010-01-01T23:59:59.000Z

443

Proceedings: special panel on geothermal model intercomparison study  

DOE Green Energy (OSTI)

Separate abstracts were prepared for five papers. Two papers were abstracted previously for EDB. Five panel responses to the project, three workshop session summaries, and conclusions drawn are also included in this report. (MHR)

Not Available

1980-12-17T23:59:59.000Z

444

Second Panel of Disposal Rooms Completed in WIPP Underground  

NLE Websites -- All DOE Office Websites (Extended Search)

Isolation Pilot Plant P.O. Box 3090 Carlsbad, New Mexico 88221 DOENews -2- Underground waste disposal panels are arranged in parallel sets of seven rooms each. Each set of seven...

445

Panel data analyses of urban economics and housing markets  

E-Print Network (OSTI)

The thesis looks three pertinent issues in Housing Market and Urban Economics literature with panel data- home sales and house price relationship, efficiency of housing market and commercial property taxation. For the first ...

Lee, Nai Jia

2009-01-01T23:59:59.000Z

446

Panel data analysis of U.S. coal productivity  

E-Print Network (OSTI)

We analyze labor productivity in coal mining in the United States using indices of productivity change associated with the concepts of panel data modeling. This approach is valuable when there is extensive heterogeneity ...

Stoker, Thomas M.

2000-01-01T23:59:59.000Z

447

Total System Performance Assessment Peer Review Panel | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Total System Performance Assessment Peer Review Panel Total System Performance Assessment Peer Review Panel Total System Performance Assessment Peer Review Panel Total System Performance Assessment (TSPA) Peer Review Panel for predicting the performance of a repository at Yucca Mountain. TSPA First Interim Report - June 20, 1997 TSPA Second Interim Report - December 12, 1997 TSPA Third Interim Report - March, 1998 TSPA Final Report - February 11, 1999 Joint NEA-IAEA International Peer Review of the Yucca Mountain Site Characterization Project's Total System Performance Assessment Supporting the Site Recommendation Process - December, 2001 More Documents & Publications Yucca Mountain Science and Engineering Report TSPA Model Development and Sensitivity Analysis of Processes Affecting Performance of a Salt Repository for Disposal of Heat-Generating Nuclear

448

Development and evaluation of sealing technologies for photovoltaic panels  

DOE Green Energy (OSTI)

This report summarizes the results of a study to develop and evaluate low temperature glass sealing technologies for photovoltaic applications. This work was done as part of Cooperative Research and Development Agreement (CRADA) No. SC95/01408. The sealing technologies evaluated included low melting temperature glass frits and solders. Because the glass frit joining required a material with a melting temperature that exceeded the allowable temperature for the active elements on the photovoltaic panels a localized heating scheme was required for sealing the perimeter of the glass panels. Thermal and stress modeling were conducted to identify the feasibility of this approach and to test strategies designed to minimize heating of the glass panel away from its perimeter. Hardware to locally heat the glass panels during glass frit joining was designed, fabricated, and successfully tested. The same hardware could be used to seal the glass panels using the low temperature solders. Solder adhesion to the glass required metal coating of the glass. The adhesion strength of the solder was dependent on the surface finish of the glass. Strategies for improving the polyisobutylene (PIB) adhesive currently being used to seal the panels and the use of Parylene coatings as a protective sealant deposited on the photovoltaic elements were also investigated. Starting points for further work are included.

Glass, S.J.; Hosking, F.M.; Baca, P.M. [and others

1998-07-01T23:59:59.000Z

449

Federal Technical Capabilities Panel Meeting Minutes  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Meeting Minutes May 22, 2013 The May 22, 2013 F2F Meeting was held thru VTC, video streaming and call-in number. Karen Boardman welcomed the FTCP and expressed her appreciation for the participation and support. She emphasized to everyone that we would work thru the meeting in regards to the new technology capabilities being used (VTC, video streaming, etc.) for the first time on this DOE FTCP Face-to-Face meeting. There were some issues with the video streaming and at the end of the meeting Ms. Boardman thanked everyone for the participation. She also asked everyone to provide feedback regarding the VTC and video streaming. As part of Ms. Boardman's welcome, she informed the group that Mark Alsdorf, NTC Nuclear Safety Training Program Manager (NSTPM) has retired from the DOE, and introduced Al MacDougall who will be on detail to

450

Panel: Microgrid Research and Field Testing IEEE PES General Meeting, 24-28 June 2007, Tampa, FL 1 In general, a microgrid can operate in both the grid-connected  

E-Print Network (OSTI)

Panel: Microgrid Research and Field Testing IEEE PES General Meeting, 24-28 June 2007, Tampa, FL 1 Abstract In general, a microgrid can operate in both the grid-connected mode and the islanded mode where the microgrid is interfaced to the main power system by a fast semiconductor switch called static switch, (SS

451

Radion stabilization from the vacuum on flat extra dimensions  

Science Conference Proceedings (OSTI)

Volume stabilization in models with flat extra dimensions could follow from vacuum energy residing in the bulk when translational invariance is spontaneously broken. We study a simple toy model that exemplifies this mechanism which considers a massive scalar field with nontrivial boundary conditions at the end points of the compact space, and includes contributions from brane and bulk cosmological constants. We perform our analysis in the conformal frame where the radion field, associated with volume variations, is defined, and present a general strategy for building stabilization potentials out of those ingredients. We also provide working examples for the interval and the T{sup n}/Z{sub 2} orbifold configuration.

Santos, Eli [Departamento de Fisica, Universidad Autonoma Metropolitana, Apartado Postal 55-534, C. P. 09340 Mexico, D.F. (Mexico); Secretaria Academica de Fisica y Matematicas, Fac. de Ingenieria, Universidad Autonoma de Chiapas, Calle 4a. Oriente, Norte 1428, 29000 Tuxtla Gutierrez, Chiapas (Mexico); Perez-Lorenzana, A. [Departamento de Fisica, Centro de Investigacion y de Estudios Avanzados del I.P.N., Apartado Postal 14-740, 07000, Mexico, D.F. (Mexico); Pimentel, Luis O. [Departamento de Fisica, Universidad Autonoma Metropolitana, Apartado Postal 55-534, C. P. 09340 Mexico, D.F. (Mexico)

2008-01-15T23:59:59.000Z

452

Final Land Configuration for the Rocky Flats Environmental Technology Site  

SciTech Connect

Closure of the Rocky Flats Environmental Technology Site (RFETS) has been completed. The future land use of the site is designated as a National Wildlife Refuge. A joint effort between Kaiser-Hill, Department of Energy, U.S. Fish and Wildlife Service, Environmental Protection Agency, State of Colorado, and other stakeholders was initiated to provide direction for developing the final land configuration. Through early identification of issues and developing mutually agreeable solutions, the final land configuration of the site was successfully completed. (authors)

Stegen, R. L.; Kapinos, J. M.; Wehner, J. P.; Snyder, B. [Parsons, 1700 Broadway, Suite 900, Denver, Colorado 80290 (United States); Davis, R. W. [Kaiser-Hill Company, LLC, 9193 S. Jamaica, Englewood, Colorado 80112 (United States)

2006-07-01T23:59:59.000Z

453

Plutonium dissolution from Rocky Flats Plant incinerator ash  

SciTech Connect

Rockwell Hanford Operations (Rockwell) soon will commence recovery of plutonium from Rocky Flats Plant incinerator ash. In preparation for this processing, Rockwell undertook literature and laboratory studies to identify, select and optimize plutonium dissolution methods for treating the ash. Ash reburning, followed by dissolution in nitric acid containing calcium fluoride, was selected as the processing method for the ash. Recommended values of process parameters were identified. Using the selected process, 99.5% plutonium recovery was achieved, leaving about 12.7 wt % heel residue for an equal weight composite of the three ashes tested. 15 refs., 26 figs.

Delegard, C.H.

1985-06-01T23:59:59.000Z

454

Interpreting a conformally flat pure radiation space-time  

E-Print Network (OSTI)

A physical interpretation is presented of the general class of conformally flat pure radiation metrics that has recently been identified by Edgar and Ludwig. It is shown that, at least in the weak field limit, successive wave surfaces can be represented as null (half) hyperplanes rolled around a two-dimensional null cone. In the impulsive limit, the solution reduces to a pp-wave whose direction of propagation depends on retarded time. In the general case, there is a coordinate singularity which corresponds to an envelope of the wave surfaces. The global structure is discussed and a possible vacuum extension through the envelope is proposed.

J. B. Griffiths; J. Podolsky

1998-08-24T23:59:59.000Z

455

What would Nelson and Plosser ...nd had they used panel unit root tests?  

E-Print Network (OSTI)

What would Nelson and Plosser ...nd had they used panel unit root tests? Christophe Hurlin y Revised Version. June 2007 Abstract In this study, we systemically apply nine recent panel unit root tests with panel unit root tests. We con...rm the fact that panel methods must be very carefully used for testing

Paris-Sud XI, Université de

456

Notes from the Call | OpenEI Community  

Open Energy Info (EERE)

Notes from the Call Notes from the Call Home > Groups > Linked Open Data Workshop in Washington, D.C. Jweers's picture Submitted by Jweers(83) Contributor 27 September, 2012 - 17:57 notes Here's my notes from the call this morning. Some confusion about the date. NREL to confirm room reservation and details. Hotels - Availability? Book soon! General Ideas We would prefer an afternoon event, especially on Monday. Start around 1pm, and do a cocktail hour or mid-afternoon snack. Allow a good amount of time for networking in the middle of the event. Keynote Speaker? Can we get another speaker as good as Ndemo, but focused on energy? What does LOD mean to him? To what extent do we want to focus people on energy issues? Possible Speakers: Jeanne Holm - Data.gov. Bernadete Hyland - 3 Round Stones

457

Calling all Young Entrepreneurs: Deadline for Energy Department Business  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Calling all Young Entrepreneurs: Deadline for Energy Department Calling all Young Entrepreneurs: Deadline for Energy Department Business Plan Competition Approaching Calling all Young Entrepreneurs: Deadline for Energy Department Business Plan Competition Approaching December 1, 2011 - 12:08pm Addthis If you’re a university student interested in low-carbon technologies and entrepreneurship, then this is the premier opportunity for you to pitch your idea. The Regional Clean Energy Business Plan Competition is accepting business plan submissions from today until March 2, 2012. If you're a university student interested in low-carbon technologies and entrepreneurship, then this is the premier opportunity for you to pitch your idea. The Regional Clean Energy Business Plan Competition is accepting business plan submissions from today until March 2, 2012.

458

Risk Assessment Technical Expert Working Group (RWG)Conference Call  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Conference Call Conference Call Minutes, February 20, 2010 Risk Assessment Technical Expert Working Group (RWG)Conference Call Minutes, February 20, 2010 Risk Assessment Technical Experts Working Group Charter - discussed who should sign and at what level the charter should be authorized. It was concluded that the Under Secretaries as the Central Technical Authorities and HS-1 should ultimately authorize the charter. It was recognized that having such high level approval of the charter would likely increase the time needed to finalize it, However, it was concluded that any delay would not impact activities because the business of the working group will move forward in the interim. Members should provide comments on current draft to Jim O'Brien (with cc to all members) by March 8 with the goal of

459

TRIBAL ISSUES TOPIC GROUP CONFERENCE CALL SUMMARY (April 26,  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CONFERENCE CALL SUMMARY (April 26, CONFERENCE CALL SUMMARY (April 26, 2000) Participants: Jessica Alcorn (DOE/EM), Kevin Blackwell (DOT), Judith Bradbury (PNL), Stephanie Bush-Goddard (NRC), Kevin Clarke (DOE/RL), Martha Crosland (DOE/EM), Tony Dipalo (NRC), Spiros Droggitis (NRC), Dorothy Gauch (NRC), Ken Gray (CTUIR), Robert Holden (NCAI), Judith Holm (DOE/NTPA), Preston Kinne (Kootenai/NTEC), Carol Peabody (DOE/EM), Wilda Portner (SAIC), Greg Sahd (DOE/WIPP), Heather Westra (Prairie Island Indian Community), J. R. Wilkinson (CTUIR), Jon Wright (DOE/EM) Issues discussed during this call included: Action Items from the February meeting in Las Vegas, NV; status of latest draft of DOE Indian Policy; DOT/FRA Rail Inspection Letter update; NRC ANPR on Tribal Prenotification; recent State and Tribal Government Group (STGWG)

460

SASIG Conference Call Minutes - August 9, 2012 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

August 9, 2012 August 9, 2012 SASIG Conference Call Minutes - August 9, 2012 August 9, 2012 Kent Oelrich, Steering Committee Chair, welcomed everyone to the call. He also said "Thank You" to everyone who responded to his request for ideas about how the laboratory can prevent unintentional disclosure of classified information in unclassified e-mails. Mary Gallion, DOE Advisor, provided the following information: Following up on the discussion from earlier calls, Mary reported that the Department of Homeland Security (DHS) has not yet issued any further guidance on hand-carrying classified information through the airport screening process. DHS is currently evaluating whether it isnecessary to have a uniform system to cover this process, and has indicated they may have further information on this topic available in

Note: This page contains sample records for the topic "flat panel called" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

TTG Call 3-12-08 Final summary  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

TEC Tribal Topic Group Conference Call TEC Tribal Topic Group Conference Call March 12, 2008 Call Lead: Julie Offner (U.S. Department of Energy/Office of Civilian Radioactive Waste Management/Office of Logistics Management, DOE/OCRWM/OLM) Other Participants: Tom Bailor (Confederated Tribes of the Umatilla Indian Reservation, CTUIR), Catherine Bohan (DOE/West Valley Demonstration Project, WVDP), Mike Coplin (Chickasaw Nation), Brad Frazier (Prairie Island Indian Community), Sydney Gieser (Booz Allen Hamilton, BAH), Elizabeth Helvey (JK Research Associates), Paloma Hill (DOE/OCRWM/ OLM), Bill Mackie (DOE/Carlsbad Field Office), Titto Moses (CTUIR), Frank Moussa (DOE/OCRWM/OLM), Christina Nelson (National Conference of State Legislatures, NCSL), Brooke Oleen (NCSL), Wilda Portner (Science Applications International Corporation, SAIC),

462

Microsoft Word - RTG Conference Call Minutes 8-5.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Transportation External Coordination (TEC) Working Group Transportation External Coordination (TEC) Working Group Rail Topic Group Conference Call Wednesday, June 26, 2002, 4:00 p.m.-5:00 p.m. ET Conference Call Minutes Summary: The conference call began at 4:00 p.m. Eastern time on Wednesday, June 26, 2002. Participants included: Scot Bates, Burlington Northern Santa Fe Railroad; Kevin Blackwell, Federal Railroad Administration (FRA); Peter Bolton, Booz-Allen and Hamilton (supporting the DOE Civilian Radioactive Waste Management Program); Sandra Covi, Union Pacific Railroad; Mark Dalton, North Carolina Highway Patrol; Ray English, DOE Office of Naval Reactors; Robert Fronczak, Association of American Railroads; Terry Gilmore, FRA; Steven Hamp, U.S. Department of Energy (DOE) National Transportation Program (NTP); George McKorkel, Energy

463

SASIG Conference Call Minutes - July 12, 2012 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

July 12, 2012 July 12, 2012 SASIG Conference Call Minutes - July 12, 2012 July 12, 2012 The Incidents of Security Concern Technical Standard, for which Sabeena Khanna is the HS-51 representative, is in the final concurrence phase in RevCom. The Incidents of Security Concern Technical Standard, for which Sabeena Khanna is the HS-51 representative, is in the final concurrence phase in RevCom. We anticipate that the standard will be published by the end of July. Technical standards generally do not impose requirements. Instead, they document procedures and best practices which may be used to develop a program that meets the intent of DOE policy. SASIG Meeting Minutes - July 2012 More Documents & Publications SASIG Conference Call Minutes - June 14, 2012 SASIG Conference Call Minutes - August 9, 2012

464

Calling Excellent Math and Science Teachers -- Einstein Fellowship Deadline  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Calling Excellent Math and Science Teachers -- Einstein Fellowship Calling Excellent Math and Science Teachers -- Einstein Fellowship Deadline is January 4 Calling Excellent Math and Science Teachers -- Einstein Fellowship Deadline is January 4 December 3, 2010 - 4:19pm Addthis Ginny Simmons Ginny Simmons Former Managing Editor for Energy.gov, Office of Public Affairs Each year, the Department of Energy selects excellent elementary and secondary math and science teachers as Albert Einstein Distinguished Educators Fellows who come to DC for 11 months to share their teaching expertise with policy makers. Teachers are selected based on exemplary experience in K-12 science, technology, engineering or mathematics teaching, demonstrated leadership in the community, an understanding of national, state, and local education policy, and communication and interpersonal skills.

465

Calling All Coders: Help Advance America's Ocean Power Industry |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Calling All Coders: Help Advance America's Ocean Power Industry Calling All Coders: Help Advance America's Ocean Power Industry Calling All Coders: Help Advance America's Ocean Power Industry December 10, 2013 - 3:57pm Addthis The Energy Department has launched a new coding competition to help industry develop new models and tools that improve the design, development, and optimization of marine and hydrokinetic devices. | Graphic courtesy of TopCoder The Energy Department has launched a new coding competition to help industry develop new models and tools that improve the design, development, and optimization of marine and hydrokinetic devices. | Graphic courtesy of TopCoder Alison LaBonte Marine and Hydrokinetic Technology Manager Brooke White Oceanographer, Water Power Program

466

Training Topic Group Teleconference Call Meeting Minutes August 19, 1998  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Teleconference Call Meeting Minutes August 19, 1998 Teleconference Call Meeting Minutes August 19, 1998 PARTICIPANTS: Jim Cruickshank, EM-76 Ella McNeil, EM-76 Martha Madden, DOE-RW Randy Small, DOE-HAMMER Tammy Ottmer, Colorado PHE Tom Smith, Ohio EMA Bill Lent, IAEM Jim Price, FDH-HAMMER Introduction - The meeting began with a roll call of members. History - A short discussion on the history of the program was planned. This item was deferred until additional members were able to participate. Development Process - Oregon Department of Health was given lead to develop core materials for each identified module. Oregon identified a small group of subject matter experts to complete a review of the first draft of each module. Modules 1-8 was reviewed by TEPP Working Group members (DOE Regional TEPP Coordinators) and then piloted by Montgomery County Fire and Rescue. At the conclusion of the pilot

467

Microsoft Word - tribal issues group call 7-25.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

TEC Tribal Issues Topic Group Conference Call TEC Tribal Issues Topic Group Conference Call July 25, 2002 Participants: Jacqueline Agnew (CERT/DOE), Judith Bradbury (PNL), Martha Crosland (DOE/EM), Scott Doig (Prairie Island Indian Community), Ed Gonzales (ELG), Judith Holm (DOE/NTPA), Patrice Kent (NTEC), Dan King (Oneida Nation), Bob Lupton (DOE/OCRWM), Wilda Portner (SAIC), Mike Rowswell (Association of State Rail Safety Managers), Larry Stern (CVSA), Catherine Volk (DOE/EM), Neil Weber (Pueblo of San Ildefonso), Corina Williams (Oneida Nation) Issues discussed during this call included introduction of CERT intern, Jacqueline Agnew, to the group, review of action item status from the January TEC meeting in New Orleans, the Transportation Addendum to the DOE Indian Policy Implementation Plan, and status of the

468

Minutes: EM SSAB Chairs Budget Conference Call - October 5, 2010  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Budget Conference Call Budget Conference Call October 5, 2010 Participants Chairs /Representatives: Site Support Staff: Idaho R.D. Maynard Nevada Oak Ridge Jeff Miller Kelly Snyder Pete Osborne Paducah Ralph Young Portsmouth Richard Snyder, Larry Parker DOE-HQ Representatives: EM-42 Melissa Nielson, Catherine Brennan, Michelle Hudson, David Borak EM-60 Joann Luczak EM-61 Connie Flohr Opening Remarks Ms. Catherine Brennan, Designated Federal Officer for the Environmental Management Site- Specific Advisory Board (EM SSAB), called the meeting to order. Budget Update Ms. Joann Luczak, Deputy Assistant Secretary of the Office of Program Planning and Budget, requested feedback from the recent Chairs' meeting in Santa Fe, NM, to ensure that the Chairs'

469

Atomic Safety and Licensing Board Panel Biennial Report, Fiscal Years 1993--1994. Volume 6  

SciTech Connect

In Fiscal Year 1993, the Atomic Safety and Licensing Board Panel (``the Panel``) handled 30 proceedings. In Fiscal Year 1994, the Panel handled 36 proceedings. The cases addressed issues in the construction, operation, and maintenance of commercial nuclear power reactors and other activities requiring a license form the Nuclear Regulatory Commission. This report sets out the Panel`s caseload during the year and summarizes, highlight, and analyzes how the wide- ranging issues raised in those proceedings were addressed by the Panel`s judges and licensing boards.

NONE

1995-08-01T23:59:59.000Z

470

Geologic and geotechnical assessment RFETS Building 371, Rocky Flats, Colorado  

SciTech Connect

This report describes the review and evaluation of the geological, geotechnical and geophysical data supporting the design basis analysis for the Rocky Flats Environmental Test Site (RFETS) Building 371. The primary purpose of the geologic and geotechnical reviews and assessments described herein are to assess the adequacy of the crustal and near surface rock and soil model used in the seismic analysis of Building 371. This review was requested by the RFETS Seismic Evaluation Program. The purpose was to determine the adequacy of data to support the design basis for Building 371, with respect to seismic loading. The objectives required to meet this goal were to: (1) review techniques used to gather data (2) review analysis and interpretations of the data; and (3) make recommendations to gather additional data if required. Where there were questions or inadequacies in data or interpretation, recommendations were made for new data that will support the design basis analysis and operation of Building 371. In addition, recommendations are provided for a geologic and geophysical assessment for a new facility at the Rocky Flats Site.

Maryak, M.E.; Wyatt, D.E.; Bartlett, S.F.; Lewis, M.R.; Lee, R.C.

1995-12-13T23:59:59.000Z

471

NATURAL RESOURCE CONSERVATION ENDOWMENT GRANT 2013 CALL FOR PROPOSALS  

E-Print Network (OSTI)

NATURAL RESOURCE CONSERVATION ENDOWMENT GRANT 2013 CALL FOR PROPOSALS PURPOSE The Natural Resource years and may be requested by submitting a new proposal with a progress report each year. Equipment education costs (tuition, school related fees, textbooks, computers, laptops, or software); and refreshments

Collins, Gary S.

472

Feature: Mobile phone calls as a business risk  

Science Conference Proceedings (OSTI)

Mobile phone technology is under attack, leaving users and businesses vulnerable. Much has been written on the data risk to businesses from mobile phones but it's only recently that the risk of voice call interception has hit the headlines. Now businesses ...

Simon Bransfield-Garth

2010-09-01T23:59:59.000Z

473

Advanced Call Scheduling for Testing a Telecommunications Network  

Science Conference Proceedings (OSTI)

This paper describes an advanced scheduling system and method for generating large volumes of calls to be used for testing a telecommunications network. The system is capable of preparing large-scale and complex network tests by viewing the task as a ...

C. Voudouris; N. Azarmi; A. Jones

1998-07-01T23:59:59.000Z

474

Calling variadic functions from a strongly-typed language  

Science Conference Proceedings (OSTI)

The importance of providing a mechanism to call C functions from high-level languages has been understood for many years and, these days, almost all statically-typed high-level-language implementations provide such a mechanism. One glaring omission, ... Keywords: compilers, foreign-function interfaces, interpreters

Matthias Blume; Michael Rainey; John Reppy

2008-09-01T23:59:59.000Z

475

IEEE Transactions on Vehicular Technology CALL FOR PAPERS  

E-Print Network (OSTI)

convertors in hybrid, plug-in hybrid, fuel cell, and electric vehicles. We solicit original technical papersIEEE Transactions on Vehicular Technology CALL FOR PAPERS Special Section on "Advanced Modeling sharing and energy routing in smart parking Autonomous decentralized vehicle-to-grid charging strategies

Fang, Yuguang "Michael"

476

IEEE Transactions on Vehicular Technology CALL FOR PAPERS  

E-Print Network (OSTI)

convertors in hybrid, plug-in hybrid, fuel cell, and electric vehicles. We solicit original technical papersIEEE Transactions on Vehicular Technology CALL FOR PAPERS Special Section on "Advanced Modeling vehicle-to-grid charging strategies and communications standards · Virtual prototyping, real

Fang, Yuguang "Michael"

477

UCI Emergency Procedures UCI Emergency Call 9-1-1  

E-Print Network (OSTI)

UCI Emergency Procedures UCI Emergency Call 9-1-1 UCI Emergency Info Line: 866-IRV-NEWS (Activated only after a disaster) Evacuation Evacuate when: · A fire and/or life safety emergency occurs, · The fire alarm activates (audible and/or visual), · Notified to do so by emergency response personnel

Barrett, Jeffrey A.

478

Experimental analysis of thermal performance of flat plate and evacuated tube solar collectors in stationary standard and daily conditions  

SciTech Connect

New comparative tests on two different types of solar collectors are presented in this paper. A standard glazed flat plate collector and an evacuated tube collector are installed in parallel and tested at the same working conditions; the evacuated collector is a direct flow through type with external compound parabolic concentrator (CPC) reflectors. Efficiency in steady-state and quasi-dynamic conditions is measured following the standard and it is compared with the input/output curves measured for the whole day. The first purpose of the present work is the comparison of results in steady-state and quasi-dynamic test methods both for flat plate and evacuated tube collectors. Besides this, the objective is to characterize and to compare the daily energy performance of these two types of collectors. An effective mean for describing and analyzing the daily performance is the so called input/output diagram, in which the collected solar energy is plotted against the daily incident solar radiation. Test runs have been performed in several conditions to reproduce different conventional uses (hot water, space heating, solar cooling). Results are also presented in terms of daily efficiency versus daily average reduced temperature difference: this allows to represent the comparative characteristics of the two collectors when operating under variable conditions, especially with wide range of incidence angles. (author)

Zambolin, E.; Del Col, D. [Dipartimento di Fisica Tecnica, Universita degli Studi di Padova, Via Venezia 1, 35131 Padova (Italy)

2010-08-15T23:59:59.000Z

479

A decision analysis method for selection of waste minimization process options for TRU mixed material at Rocky Flats  

Science Conference Proceedings (OSTI)

When plutonium production operations were halted at the Rocky Flats Plant, there remained a volume of material that was retained in order that its plutonium content could be reclaimed. This material, known as residue, is transuranic and mixed transuranic material with a plutonium content above what was called the ``economic discard limit,`` or EDL. The EDL was defined in terms of each type of residue material, and each type of material is given an Item Description Code, or IDC. Residue IDCs have been grouped into general category descriptions which include plutonium (Pu) nitrate solutions, Pu chloride solutions, salts, ash, metal, filters, combustibles, graphite, crucibles, glass, resins, gloves, firebrick, and sludges. Similar material exists both below and above the EDL, with material with the (previous) economic potential for reclamation of plutonium classified as residue.

Williams, R.E.; Dustin, D.F.

1994-02-01T23:59:59.000Z

480

Rocky Flats CAAS System Recalibrated, Retested, and Analyzed to Install in the Criticality Experiments Facility at the Nevada Test Site  

Science Conference Proceedings (OSTI)

Neutron detectors and control panels transferred from the Rocky Flats Plant (RFP) were recalibrated and retested for redeployment to the CEF. Testing and calibration were successful with no failure to any equipment. Detector sensitivity was tested at a TRIGA reactor, and the response to thermal neutron flux was satisfactory. MCNP calculated minimum fission yield ({approx} 2 x 10{sup 15} fissions) was applied to determine the thermal flux at selected detector positions at the CEF. Thermal flux levels were greater than 6.39 x 10{sup 6} (n/cm{sup 2}-sec), which was about four orders of magnitude greater than the minimum alarm flux. Calculations of detector survivable distances indicate that, to be out of lethal area, a detector needs to be placed greater than 15 ft away from a maximum credible source. MCNP calculated flux/dose results were independently verified by COG. CAAS calibration and the testing confirmed that the RFP CAAS system is performing its functions as expected. New criteria for the CAAS detector placement and 12-rad zone boundaries at the CEF are established. All of the CAAS related documents and hardware have been transferred from LLNL to NSTec for installation at the CEF high bay areas.

Kim, S; Heinrichs, D; Biswas, D; Huang, S; Dulik, G; Scorby, J; Boussoufi, M; Liu, B; Wilson, R

2009-05-27T23:59:59.000Z

Note: This page contains sample records for the topic "flat panel called" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

REPORT OF THE BASIC ENERGY SCIENCES ADVISORY COMMITTEE PANEL  

NLE Websites -- All DOE Office Websites (Extended Search)

BASIC ENERGY SCIENCES BASIC ENERGY SCIENCES ADVISORY COMMITTEE PANEL ON D.O.E. SYNCHROTRON RADIATION SOURCES AND SCIENCE NOVEMBER 1997 EPRI Electric Power Research Institute Powering Progress through Innovative Solutions January 14th, 1998 Dr. Martha A. Krebs, Director Office of Energy Research United States Department of Energy Washington, DC 20585 Dear Martha, The purpose of this letter is to summarize the discussions of the Basic Energy Sciences Advisory Committee at its meeting on October 8 - 9, 1997 at the Holiday Inn in Gaithersburg as they related to the report from our Panel on Synchrotron Radiation Sources and Science. This Panel was assembled in response to the Charge presented to BESAC in your letter of October 9th, 1996 to reassess the need for and the opportunities presented by each of the four synchrotron

482

NREL: News Feature - Building Panels Protect, Provide Comfort  

NLE Websites -- All DOE Office Websites (Extended Search)

Building Panels Protect, Provide Comfort Building Panels Protect, Provide Comfort October 30, 2009 Walking into a building constructed before the days of heating systems and air conditioning, such as a southwestern adobe, still elicits a sense of comfort and coziness. The concept of using thermal mass in walls to help maintain the temperature of a building is not new. And now, this tried and true method is being used to regulate comfort systems of NREL's Research Support Facilities (RSF), one of the most energy efficient buildings in the world. "In this case, the exterior skin of the building is doing more than just keeping the weather out," Philip Macey, project manager for RNL, the design firm for the RSF, said. "Precast panels installed as the walls are actually part of the heating and cooling system for the building.

483

Nuclear Energy Panel Discussion at University of Chicago  

NLE Websites -- All DOE Office Websites (Extended Search)

Nuclear Energy Panel Discussion at University of Chicago Nuclear Energy Panel Discussion at University of Chicago Director's Welcome Organization Achievements Highlights Fact Sheets, Brochures & Other Documents Multimedia Library About Nuclear Energy Nuclear Reactors Designed by Argonne Argonne's Nuclear Science and Technology Legacy Opportunities within NE Division Visit Argonne Work with Argonne Contact us For Employees Site Map Help Join us on Facebook Follow us on Twitter NE on Flickr Celebrating the 70th Anniversary of Chicago Pile 1 (CP-1) Argonne OutLoud on Nuclear Energy Argonne Energy Showcase 2012 Highlights Bookmark and Share Nuclear Energy Panel Discussion at University of Chicago Did you miss this event? Watch recording of "Lessons from Fukushima" The event's webcast is over, but you can still watch and/or download the

484

Plasma Panel Sensors for Particle and Beam Detection  

E-Print Network (OSTI)

The plasma panel sensor (PPS) is an inherently digital, high gain, novel variant of micropattern gas detectors inspired by many operational and fabrication principles common to plasma display panels (PDPs). The PPS is comprised of a dense array of small, plasma discharge, gas cells within a hermetically-sealed glass panel, and is assembled from non-reactive, intrinsically radiation-hard materials such as glass substrates, metal electrodes and mostly inert gas mixtures. We are developing the technology to fabricate these devices with very low mass and small thickness, using gas gaps of at least a few hundred micrometers. Our tests with these devices demonstrate a spatial resolution of about 1 mm. We intend to make PPS devices with much smaller cells and the potential for much finer position resolutions. Our PPS tests also show response times of several nanoseconds. We report here our results in detecting betas, cosmic-ray muons, and our first proton beam tests.

Peter S. Friedman; Robert Ball; James R. Beene; Yan Benhammou; E. H. Bentefour; J. W. Chapman; Erez Etzion; Claudio Ferretti; Nir Guttman; Daniel S. Levin; Meny Ben-Moshe; Yiftah Silver; Robert L. Varner; Curtis Weaverdyck; Bing Zhou

2012-11-23T23:59:59.000Z

485

File:Whiskey flats 100k.pdf | Open Energy Information  

Open Energy Info (EERE)

flats 100k.pdf flats 100k.pdf Jump to: navigation, search File File history File usage Metadata File:Whiskey flats 100k.pdf Size of this preview: 388 × 600 pixels. Full resolution ‎(1,650 × 2,550 pixels, file size: 375 KB, MIME type: application/pdf) Geothermal Sale Parcels Whiskey Flat File history Click on a date/time to view the file as it appeared at that time. Date/Time Thumbnail Dimensions User Comment current 20:39, 7 October 2013 Thumbnail for version as of 20:39, 7 October 2013 1,650 × 2,550 (375 KB) Kyoung (Talk | contribs) Geothermal Sale Parcels Whiskey Flat You cannot overwrite this file. Edit this file using an external application (See the setup instructions for more information) File usage The following page links to this file: Whiskey Flats Geothermal Area

486

Flat bunch creation and acceleration: a possible path for the LHC luminosity upgrade  

Science Conference Proceedings (OSTI)

Increasing the collider luminosity by replacing bunches having Gaussian line-charge distribution with flat bunches, but with same beam-beam tune shift at collision, has been studied widely in recent years. But, creation of 'stable' flat bunches (and their acceleration) using a multiple harmonic RF system has not been fully explored. Here, we review our experience with long flat bunches in the barrier RF buckets at Fermilab.We presentsome preliminary results from beam dynamics simulations and recent beam studies in the LHC injectors to create stable flat bunches using double harmonic RF systems. The results deduced from these studies will be used to model the necessary scheme for luminosity upgrade in the LHC. We have also described a viable (and economical) way for creation and acceleration of flat bunches in the LHC. The flat bunch scheme may have many advantages over the LHC baseline scenario, particularly because of the reduced momentum spread of the bunch for increased intensities.

Bhat, C.M.; /Fermilab

2009-05-01T23:59:59.000Z

487

Addendum to Revision 1 of the Corrective Action Investigation Plan for Corrective Action Unit 98: Frenchman Flat, Nevada Test Site, Nevada (Addendum Revision No. 1)  

SciTech Connect

This document is submitted as an addendum to the Corrective Action Investigation Plan (CAIP) for Corrective Action Unit (CAU) 98: Frenchman Flat, Nevada Test Site (NTS), Nevada. The addendum was prepared to propose work activities in response to comments resulting from the U.S. Department of Energy's (DOE's) review of the draft Frenchman Flat CAU model of groundwater flow and contaminant transport completed in April 1999. The reviewers included an external panel of experts and the Nevada Division of Environmental Protection. As a result of the review, additional work scope, including new data-collection and modeling activities, has been identified for the Frenchman Flat CAU. The proposed work scope described in this addendum will be conducted in accordance with the revised Underground Test Area strategy contained in the December 2000 amendment to the Federal Facility Agreement and Consent Order. The Frenchman Flat CAU model is a group of interdependent models designed to predict the extent of contamination in groundwater due to the underground nuclear tests conducted within this CAU. At the time of the DOE review, the CAU model consisted of a CAU groundwater flow and transport model comprised of two major components: a groundwater flow model and a recharge model. The CAU groundwater flow model is supported by a hydrostratigraphic model and a recharge model, whereas the CAU transport model is supported by a source-term model. As part of the modeling activities proposed in this addendum, two new major components may be added to the Frenchman Flat CAU model: a total-system model and two local groundwater flow and transport models. The reviewers identified several issues relating to insufficiency of data and inadequacy of the modeling process that should be addressed to provide additional confidence in the modeling results with respect to the potential for contaminant migration to the Lower Carbonate Aquifer. The proposed additional work scope includes new data-collection activities, development and use of local-scale models of the two underground nuclear testing areas, and potential revisions of draft CAU groundwater flow and transport models. Upon completion of this work, an evaluation will be made by DOE to ensure that all issues have been resolved.

U.S. Department of Energy, National Nuclear Security Administration Nevada Operations Office

2001-06-06T23:59:59.000Z

488

Enforcement Letter -Rocky Flats-08/02/2000  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

, 2000 , 2000 Mr. Robert G. Card [ ] Kaiser-Hill Company, L.L.C. Rocky Flats Environmental Technology Site 10808 Highway 93, Unit B Golden, CO 80403-8200 Subject: Enforcement Letter Dear Mr. Card: This letter refers to the Department of Energy's (DOE) evaluation of potential noncompliances with the requirements of 10 CFR 830.120 (Quality Assurance Rule). The potential noncompliances involved inadequate implementation of work controls, specifically failure to perform required combustible gas surveillances. The failure to fully perform the required surveillances was identified by the contractor during a comprehensive Kaiser-Hill (KHLL) Implementation Validation Review (IVR) team verifying implementation of the Basis of Interim Operation (BIO) for Buildings 776 and

489

Enforcement Letter - Rocky Flats -07/20/1998  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

, 1998 , 1998 Mr. Robert G. Card [ ] Kaiser-Hill Company, L.L.C. Rocky Flats Environmental Technology Site P.O. Box 464 Golden, CO 80402-0464 Subject: Enforcement Letter Noncompliance Reports NTS-RFO--KHLL-SITEWIDE-1997-0006 NTS-RFO--KHLL-371OPS-1997-0002 NTS-RFO--KHLL-SITEWIDE-1997-0010 NTS-RFO--KHLL-SITEWIDE-1998-0001 Dear Mr. Card: This letter refers to the Department of Energy=s (DOE) evaluation of noncompliances reported in four Noncompliance Tracking System (NTS) entries, identified in the subject line above. The four NTS reports were submitted between September 24, 1997, and March 3, 1998. The reports identified potential noncompliances with requirements of 10 CFR 830.120 (Quality Assurance Rule) and 10 CFR 835 (Radiation Protection Rule). The Office of Enforcement and Investigation evaluated these NTS reports based on the

490

DOE - Office of Legacy Management -- Rocky Flats Petition  

NLE Websites -- All DOE Office Websites (Extended Search)

Petition Petition Rocky Flats Site, Colorado Site-Specific Uranium Standards Petition All documents are Adobe Acrobat files. pdf_icon U.S. Department of Energy's Proponent's Pre-Hearing Statement for Proposed Revisions to Segments 4a, 4b, and 5 of Big Dry Creek (Walnut and Woman Creeks) Regulation #38 (5 CCR 1002-38) Figure 1 Figure 2 Thermal Ionization Mass Spectrometry Uranium Results for November 2008 RFETS Waters Thermal Ionization Mass Spectrometry Uranium Results for September 2008 RFETS Waters Thermal Ionization Mass Spectrometry Uranium Results for October 2007 RFETS Waters Quantitative Evaluation of Mixture Components in RFETS Uranium Isotopic Analyses Proposed Notice Petition for Rulemaking Regarding Site-Specific Uranium Standards Rulemaking Petition Water Monitoring Locations

491

System Advisor Model: Flat Plate Photovoltaic Performance Modeling Validation Report  

SciTech Connect

The System Advisor Model (SAM) is a free software tool that performs detailed analysis of both system performance and system financing for a variety of renewable energy technologies. This report provides detailed validation of the SAM flat plate photovoltaic performance model by comparing SAM-modeled PV system generation data to actual measured production data for nine PV systems ranging from 75 kW to greater than 25 MW in size. The results show strong agreement between SAM predictions and field data, with annualized prediction error below 3% for all fixed tilt cases and below 8% for all one axis tracked cases. The analysis concludes that snow cover and system outages are the primary sources of disagreement, and other deviations resulting from seasonal biases in the irradiation models and one axis tracking issues are discussed in detail.

Freeman, J.; Whitmore, J.; Kaffine, L.; Blair, N.; Dobos, A. P.

2013-12-01T23:59:59.000Z

492

Topological Flat Band Models and Fractional Chern Insulators  

E-Print Network (OSTI)

Topological insulators and their intriguing edge states can be understood in a single-particle picture and can as such be exhaustively classified. Interactions significantly complicate this picture and can lead to entirely new insulating phases, with an altogether much richer and less explored phenomenology. Most saliently, lattice generalizations of fractional quantum Hall states, dubbed fractional Chern insulators, have recently been predicted to be stabilized by interactions within nearly dispersionless bands with non-zero Chern number, $C$. Contrary to their continuum analogues, these states do not require an external magnetic field and may potentially persist even at room temperature, which make these systems very attractive for possible applications such as topological quantum computation. This review recapitulates the basics of tight-binding models hosting nearly flat bands with non-trivial topology, $C\

Emil J. Bergholtz; Zhao Liu

2013-08-01T23:59:59.000Z

493

Forecast Calls for Better Models: Examining the Core  

NLE Websites -- All DOE Office Websites (Extended Search)

Forecast Calls for Better Models: Examining the Core Forecast Calls for Better Models: Examining the Core Components of Arctic Clouds to Clear Their Influence on Climate For original submission and image(s), see ARM Research Highlights http://www.arm.gov/science/highlights/ Research Highlight Predicting how atmospheric aerosols influence cloud formation and the resulting feedback to climate is a challenge that limits the accuracy of atmospheric models. This is especially true in the Arctic, where mixed-phase (both ice- and liquid-based) clouds are frequently observed, but the processes that determine their composition are poorly understood. To obtain a closer look at what makes up Arctic clouds, scientists characterized cloud droplets and ice crystals collected at the North Slope of Alaska as part of the Indirect and Semi-Direct Aerosol Campaign (ISDAC) field study

494

05 JGI Call Pilot User Guide - 11x17  

NLE Websites -- All DOE Office Websites (Extended Search)

Call Pilot Call Pilot Quick Reference Guide 11/1/05 Forwarding a message (cont'd) 3. When you have finished entering addresses, press # again to end the list. 4. Press 5 if you want to record an introduction. Wait for the tone, begin recording, then press #. 5. Press 7 9 to send the message. Composing a message To compose a message, you address it first, then record your message and send it. You can address a message to one or more people or distribution lists. Before you send a message, you can edit it and add message options. To address, record, and send a message 1. While logged in to your mailbox, press 7 5. 2. Enter the first address, then press #. 3. Continue to enter addresses followed by #. 4. Press 0 # to cancel the last address you en- tered in the list. Repeat this step for each ad-

495

A Reference Based Analysis Framework for Analyzing System Call Traces  

SciTech Connect

Reference based analysis (RBA) is a novel data mining tool for exploring a test data set with respect to a reference data set. The power of RBA lies in it ability to transform any complex data type, such as symbolic sequences and multi-variate categorical data instances, into a multivariate continuous representation. The transformed representation not only allows visualization of the complex data, which cannot be otherwise visualized in its original form, but also allows enhanced anomaly detection in the transformed feature space. We demonstrate the application of the RBA framework in analyzing system call traces and show how the transformation results in improved intrusion detection performance over state of art data mining based intrusion detection methods developed for system call traces.

Chandola, Varun [ORNL; Kumar, Vipin [University of Minnesota; Boriah, Shyam [University of Minnesota

2010-01-01T23:59:59.000Z

496

Risk Assessment Technical Expert Working Group (RWG) Conference Call  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Conference Conference Call Minutes, March 8, 2010 Risk Assessment Technical Expert Working Group (RWG) Conference Call Minutes, March 8, 2010 Risk Assessment Technical Experts Working Group Charter - The steering committee discussed the draft charter. Two recommended changes were agreed upon: * A sentence will be added to identify that the steering committee will develop protocols to define specifics relative to certain work activities (such as peer reviews) * Agreed to add Steve Koonin, Undersecretary for Science for signature. Note: Sharon Steele is officially the NNSA representative to the steering committee. 2. Web Page - Jim O'Brien reviewed the website. In general, the steering committee agreed that with small changes the web site was ready to go "live."

497

Property:FlatDemandStructure | Open Energy Information  

Open Energy Info (EERE)

Property Property Edit with form History Facebook icon Twitter icon » Property:FlatDemandStructure Jump to: navigation, search This is a property of type Page. Pages using the property "FlatDemandStructure" Showing 25 pages using this property. (previous 25) (next 25) 0 0000827d-84d0-453d-b659-b86869323897 + 0000827d-84d0-453d-b659-b86869323897 + 000e60f7-120d-48ab-a1f9-9c195329c628 + 000e60f7-120d-48ab-a1f9-9c195329c628 + 00101108-073b-4503-9cd4-01769611c26f + 00101108-073b-4503-9cd4-01769611c26f + 001361ca-50d2-49bc-b331-08755a2c7c7d + 001361ca-50d2-49bc-b331-08755a2c7c7d + 0016f771-cda9-4312-afc2-63f10c8d8bf5 + 0016f771-cda9-4312-afc2-63f10c8d8bf5 + 00178d3d-17cb-46ed-8a58-24c816ddce96 + 00178d3d-17cb-46ed-8a58-24c816ddce96 + 001d1952-955c-411b-8ce4-3d146852a75e + 001d1952-955c-411b-8ce4-3d146852a75e +

498

(Revised 09-05-13) TITLE CALL NUMBER  

E-Print Network (OSTI)

2006 Abuelo, El PN 1997 .A284 2003 ACM Siggraph 2004 full conference DVD-ROM T 385 .S53 2004 disc 1-3 #12;4 TITLE CALL NUMBER ACM Siggraph 2005 full conference DVD-ROM T 385 .S53 2005 disc 1-4 Adaptation the Odds: The Artists of "The Harlem Renaissance" N6538 .N5A33 2004 Air, Light, and Utopia: The Modern

Kearfott, R. Baker

499

System requirements for one-time-use ENRAF control panel software  

SciTech Connect

An Enraf Densitometer is installed on tank 241-AY-102. The Densitometer will frequently be tasked to obtain and log density profiles. The activity can be effected a number of ways. Enraf Incorporated provides a software package called ''Logger18'' to its customers for the purpose of in-shop testing of their gauges. Logger18 is capable of accepting an input file which can direct the gauge to obtain a density profile for a given tank level and bottom limit. Logger18 is a complex, DOS based program which will require trained technicians and/or tank farm entries to obtain the data. ALARA considerations have prompted the development of a more user-friendly, computer-based interface to the Enraf densitometers. This document records the plan by which this new Enraf data acquisition software will be developed, reviewed, verified, and released. This plan applies to the development and implementation of a one-time-use software program, which will be called ''Enraf Control Panel.'' The software will be primarily used for remote operation of Enraf Densitometers for the purpose of obtaining and logging tank product density profiles.

HUBER, J.H.

1999-08-19T23:59:59.000Z

500

Understanding Contaminant Transport Pathways at Rocky Flats - A Basis for the Remediation Strategy  

SciTech Connect

The Rocky Flats Environmental Technology Site (RFETS) is a Department of Energy facility located approximately 16 miles northwest of Denver, Colorado. Processing and fabrication of nuclear weapons components occurred at Rocky Flats from 1952 through 1989. Operations at the Site included the use of several radionuclides, including plutonium-239/240 (Pu), americium-241 (Am), and various uranium (U) isotopes, as well as several types of chlorinated solvents. The historic operations resulted in legacy contamination, including contaminated facilities, process waste lines, buried wastes and surface soil contamination. Decontamination and removal of buildings at the site was completed in late 2005, culminating more than ten years of active environmental remediation work. The Corrective Action Decision/Record of Decision was subsequently approved in 2006, signifying regulatory approval and closure of the site. The use of RFETS as a National Wildlife Refuge is scheduled to be in full operation by 2012. To develop a plan for remediating different types of radionuclide contaminants present in the RFETS environment required understanding the different environmental transport pathways for the various actinides. Developing this understanding was the primary objective of the Actinide Migration Evaluation (AME) project. Findings from the AME studies were used in the development of RFETS remediation strategies. The AME project focused on issues of actinide behavior and mobility in surface water, groundwater, air, soil and biota at RFETS. For the purposes of the AME studies, actinide elements addressed included Pu, Am, and U. The AME program, funded by DOE, brought together personnel with a broad range of relevant expertise in technical investigations. The AME advisory panel identified research investigations and approaches that could be used to solve issues related to actinide migration at the Site. An initial step of the AME was to develop a conceptual model to provide a qualitative description of the relationships among potential actinide sources and transport pathways at RFETS. One conceptual model was developed specifically for plutonium and americium, because of their similar geochemical and transport properties. A separate model was developed for uranium because of its different properties and mobility in the environment. These conceptual models were guidelines for quantitative analyses described in the RFETS Pathway Analysis Report, which used existing data from the literature as well as site-specific analyses, including field, laboratory and modeling studies to provide quantitative estimates of actinide migration in the RFETS environment. For pathways where more than one method was used to estimate offsite loads for a specific pathway, the method yielding the highest estimated off-site was used for comparison purposes. For all actinides studied, for pre-remediation conditions, air and surface water were identified to be the dominant transport mechanisms. The estimated annual airborne plutonium-239/240 load transported off site exceeded the surface water load by roughly a factor of 40. However, despite being the largest transport pathway, airborne radionuclide concentrations at the monitoring location with the highest measurements during the period studied were less than two percent of the allowable 10 milli-rem standard governing DOE facilities. Estimated actinide loads for other pathways were much less. Shallow groundwater was approximately two orders of magnitude lower, or 1/100 of the load conveyed in surface water. The estimated biological pathway load for plutonium was approximately five orders of magnitude less, or 1/100,000, of the load estimated for surface-water. The pathway analysis results were taken into consideration during subsequent remediation activities that occurred at the site. For example, when the 903 Pad area was remediated to address elevated concentrations of Pu and Am in the surface soil, portable tent structures were constructed to prevent wind and water erosion from occurring while remediation activitie

Paton, Ian [Wright Water Engineers, Inc.: 2490 W. 26th Avenue, Suite 100A, Denver, CO 80211 (United States)

2008-01-15T23:59:59.000Z