Powered by Deep Web Technologies
Note: This page contains sample records for the topic "fixed support technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

MHK Technologies/Wave Treader fixed | Open Energy Information  

Open Energy Info (EERE)

MHK Technologies/Wave Treader fixed MHK Technologies/Wave Treader fixed < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Wave Treader fixed.jpg Technology Profile Primary Organization Green Ocean Energy Ltd Project(s) where this technology is utilized *MHK Projects/Development of Ocean Treader Technology Resource Click here Wave Technology Type Click here Attenuator Technology Readiness Level Click here TRL 4: Proof of Concept Technology Description The Wave Treader concept utilises the arms and sponsons from Ocean Treader and instead of reacting against a floating Spar Buoy, will react through an Interface Structure onto the Foundation of an Offshore Wind Turbine. Between the Arms and the Interface Structure hydraulic cylinders are mounted and as the wave passes the machine first the forward Sponson will lift and fall and then the aft Sponson will lift and fall each stroking their hydraulic cylinder in turn. This pressurises hydraulic fluid which is then smoothed by hydraulic accumulators before driving a hydraulic motor which in turn drives an electricity generator. The electricity is then exported through the cable shared with the Wind Turbine.

2

INFORMATION TECHNOLOGY SUPPORT SERVICESCONTRACTS, IG-0516 | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

INFORMATION TECHNOLOGY SUPPORT SERVICESCONTRACTS, IG-0516 INFORMATION TECHNOLOGY SUPPORT SERVICESCONTRACTS, IG-0516 Over the last several years, there have been a number of...

3

Building Technologies Office: National Laboratories Supporting Building  

NLE Websites -- All DOE Office Websites (Extended Search)

National Laboratories National Laboratories Supporting Building America to someone by E-mail Share Building Technologies Office: National Laboratories Supporting Building America on Facebook Tweet about Building Technologies Office: National Laboratories Supporting Building America on Twitter Bookmark Building Technologies Office: National Laboratories Supporting Building America on Google Bookmark Building Technologies Office: National Laboratories Supporting Building America on Delicious Rank Building Technologies Office: National Laboratories Supporting Building America on Digg Find More places to share Building Technologies Office: National Laboratories Supporting Building America on AddThis.com... About Take Action to Save Energy Partner With DOE Activities Solar Decathlon Building America

4

MHK Technologies/LIMPET OWC fixed Near shore OWC | Open Energy Information  

Open Energy Info (EERE)

LIMPET OWC fixed Near shore OWC LIMPET OWC fixed Near shore OWC < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage LIMPET OWC fixed Near shore OWC.jpg Technology Profile Primary Organization Voith Hydro Wavegen Limited Project(s) where this technology is utilized *MHK Projects/Siadar Technology Resource Click here Wave Technology Type Click here Oscillating Water Column Technology Readiness Level Click here TRL 7/8: Open Water System Testing & Demonstration & Operation Technology Description Limpet (Land Installed Marine Powered Energy Transformer) is a shoreline energy converter sited on the island of Islay, off Scotland's west coast. The current Limpet device - Limpet 500 - was installed in 2000 and produces power for the national grid. Limpet uses the principle of an oscillating water column.

5

Electronic Technology Support of Programmatic Divisions  

NLE Websites -- All DOE Office Websites (Extended Search)

Electronic Technology Support of Programmatic Divisions Electronic Technology Support of Programmatic Divisions Speaker(s): Brad Bingham Date: March 13, 2003 - 12:00pm Location: 90-3148 The Electronics Technology Group within the Engineering Division possesses a number capabilities and skilled staff that can provide support to projects within the programmatic Divisions. Different areas of expertise include electronic fabrication, prototyping, repair and maintenance of existing equipment and instrument calibration. Electronic fabrication capabilities are from the printed circuit board level to electronic packaging and equipment chassis builds to the large multi-rack control system level. The Electronics Technology Group also has a personnel matrix program to support projects with full time, part time or limited time

6

Site Support Contractor Solicitation - Information Technology and  

NLE Websites -- All DOE Office Websites (Extended Search)

Information Technology Operations and Maintenance Services (ITOMS) – DE-SOL-0003719 Information Technology Operations and Maintenance Services (ITOMS) – DE-SOL-0003719 Solicitation DE-SOL-0003719 - Contract DE-DT0004246 has been awarded to Alliant Enterprises JV, LLC in response to the Information Technology Operations and Maintenance Support Services (ITOMS) solicitation (DE-SOL-0003719) The electronic reading room is part of NETL's strategy to provide information that may benefit potential offerors in preparing their proposal. The information is provided to assist the reader in gaining an enhanced understanding of the requirement. NETL has completed the Market Research related to performing the Information Technology Support Services requirement. Based on the Market Research and the received concurrence from the Small Business

7

Technology development activities supporting tank waste remediation  

Science Conference Proceedings (OSTI)

This document summarizes work being conducted under the U.S. Department of Energy`s Office of Technology Development (EM-50) in support of the Tank Waste Remediation System (TWRS) Program. The specific work activities are organized by the following categories: safety, characterization, retrieval, barriers, pretreatment, low-level waste, and high-level waste. In most cases, the activities presented here were identified as supporting tank remediation by EM-50 integrated program or integrated demonstration lead staff and the selections were further refined by contractor staff. Data sheets were prepared from DOE-HQ guidance to the field issued in September 1993. Activities were included if a significant portion of the work described provides technology potentially needed by TWRS; consequently, not all parts of each description necessarily support tank remediation.

Bonner, W.F.; Beeman, G.H.

1994-06-01T23:59:59.000Z

8

SUPPORT ADMINISTRATIVE SERVICES FOR THE NATIONAL ENERGY TECHNOLOGY  

NLE Websites -- All DOE Office Websites (Extended Search)

3 SUPPORT ADMINISTRATIVE SERVICES FOR THE NATIONAL ENERGY TECHNOLOGY LABORATORY TABLE OF CONTENTS SECTION B - SUPPLIES OR SERVICES AND PRICESCOSTS ......

9

NREL: Technology Transfer - DOE Supports and Expands NREL's ...  

National Renewable Energy Laboratory Technology Transfer DOE Supports and Expands NREL's Commercialization Efforts. Through the U.S. Department of Energy's (DOE ...

10

How ORISE is Making a Difference: Training and Technology Support  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Support The Oak Ridge Institute for Science and Education (ORISE) prepares emergency personnel to respond to natural disasters or acts of terrorism through training and...

11

Site Support Contractor Solicitation - Information Technology...  

NLE Websites -- All DOE Office Websites (Extended Search)

information is provided to assist the reader in gaining an enhanced understanding of the requirement. The Department of Energy (DOE) National Energy Technology Laboratory (NETL)...

12

Plant Support Engineering: Innovative Technology Solutions Assessment  

Science Conference Proceedings (OSTI)

This project was established to look at opportunities to better employ new or alternative technologies as well as means to resolve obsolescence problems. For example, better monitoring or diagnostic equipment might be engaged to improve equipment reliability and minimize work-hours. Likewise, use of alternative technologies might be a great improvement over currently installed equipmentfor example, using high density polyethylene (HDPE) piping to replace carbon steel pipe damaged due to corrosion. Analog...

2007-03-26T23:59:59.000Z

13

DOE-Supported Coal Cleaning Technology Succeeds in Commercial Demonstration  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Supported Coal Cleaning Technology Succeeds in Commercial Supported Coal Cleaning Technology Succeeds in Commercial Demonstration DOE-Supported Coal Cleaning Technology Succeeds in Commercial Demonstration January 4, 2011 - 12:00pm Addthis Washington, DC - A novel technology that could help release some of the currently unusable energy in an estimated 2 billion tons of U.S. coal waste has been successfully demonstrated by a Department of Energy (DOE) supported project. The full-scale test of the advanced hyperbaric centrifuge technology at a Jim Walter Resources Inc. coal-cleaning plant in Alabama resulted in the successful reduction of moisture from ultrafine coal waste. The test builds on an eight-year cooperative effort between the Office of Fossil Energy's (FE) National Energy Technology Laboratory (NETL) and the Virginia

14

NREL: Technology Deployment - Other Federal Agency Support  

NLE Websites -- All DOE Office Websites (Extended Search)

Other Federal Agency Support Other Federal Agency Support Photo of a man and a woman standing behind a ground-mounted solar panel installation. Merry Edwards Winery in California is almost 100% solar powered and just one example of the more than 77,511 project applications reviewed by NREL prior to receiving funding through the U.S. Department of Treasury Recovery Act Section 1603 Treasury Grant Program. Courtesy of Ben Miller, Merry Edwards Winery Through work-for-others agreements, NREL supports other federal agencies in finding ways to meet energy savings goals through energy assessments, analysis, project guidance, and other activities. General Services Administration Since 2007, NREL has worked with the General Services Administration (GSA) to conduct energy assessments and identify opportunities for distributed

15

How ORISE is Making a Difference: Training and Technology Support  

NLE Websites -- All DOE Office Websites (Extended Search)

Training and Technology Support Training and Technology Support The Oak Ridge Institute for Science and Education (ORISE) prepares emergency personnel to respond to natural disasters or acts of terrorism through training and technology tools that aid in providing a coordinated relief effort. A fundamental part of preparing an organized response is ensuring that all emergency personnel effectively communicate and participate in information sharing. Because technology is the foundation of a successful response effort, ORISE develops innovative response tools to support a variety of government preparedness exercises and readiness programs. Learn more about how ORISE is making a difference in the area of training and technology support through the project examples listed below. Asset Readiness Management System (ARMS)

16

DOE-Supported Project Advances Clean Coal, Carbon Capture Technology |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE-Supported Project Advances Clean Coal, Carbon Capture DOE-Supported Project Advances Clean Coal, Carbon Capture Technology DOE-Supported Project Advances Clean Coal, Carbon Capture Technology January 29, 2013 - 12:00pm Addthis Washington, DC - Researchers at The Ohio State University (OSU) have successfully completed more than 200 hours of continuous operation of their patented Coal-Direct Chemical Looping (CDCL) technology - a one-step process to produce both electric power and high-purity carbon dioxide (CO2). The test, led by OSU Professor Liang-Shih Fan, represents the longest integrated operation of chemical looping technology anywhere in the world to date. The test was conducted at OSU's 25 kilowatt thermal (kWt) CDCL combustion sub-pilot unit under the auspices of DOE's Carbon Capture Program, which is developing innovative environmental control technologies to foster the

17

DOE-Supported Project Advances Clean Coal, Carbon Capture Technology |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE-Supported Project Advances Clean Coal, Carbon Capture DOE-Supported Project Advances Clean Coal, Carbon Capture Technology DOE-Supported Project Advances Clean Coal, Carbon Capture Technology January 29, 2013 - 12:00pm Addthis Washington, DC - Researchers at The Ohio State University (OSU) have successfully completed more than 200 hours of continuous operation of their patented Coal-Direct Chemical Looping (CDCL) technology - a one-step process to produce both electric power and high-purity carbon dioxide (CO2). The test, led by OSU Professor Liang-Shih Fan, represents the longest integrated operation of chemical looping technology anywhere in the world to date. The test was conducted at OSU's 25 kilowatt thermal (kWt) CDCL combustion sub-pilot unit under the auspices of DOE's Carbon Capture Program, which is developing innovative environmental control technologies to foster the

18

Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Program  

Fuel Cell Technologies Publication and Product Library (EERE)

This report identifies the commercial and near-commercial (emerging) hydrogen and fuel cell technologies and products that resulted from Department of Energy support through the Fuel Cell Technologies

19

SUPPORT ADMINISTRATIVE SERVICES FOR THE NATIONAL ENERGY TECHNOLOGY  

NLE Websites -- All DOE Office Websites (Extended Search)

SUPPORT ADMINISTRATIVE SERVICES FOR THE NATIONAL ENERGY TECHNOLOGY LABORATORY TABLE OF CONTENTS SECTION B - SUPPLIES OR SERVICES AND PRICES/COSTS ........................................................................ 8 B.1 SERVICES BEING ACQUIRED - SUPPORT ADMINISTRATIVE SERVICES ................................. 8 B.2 GUARANTEED MINIMUM CONTRACT VALUE - MAXIMUM AVAILABLE PERFORMANCE AWARD FEE ........................................................................................................................................................... 8 B.3 CEILING PRICE OF CONTRACT ............................................................................................................ 8 B.4 ESTIMATED LEVEL OF EFFORT ........................................................................................................... 8

20

NETL: News Release - Department of Energy Supported Technologies Recognized  

NLE Websites -- All DOE Office Websites (Extended Search)

9, 2007 9, 2007 Department of Energy Supported Technologies Recognized with R&D 100 Awards R&D 100 Award Logo Washington, DC - Three technologies developed with support from the Office of Fossil Energy's National Energy Technology Laboratory (NETL) have won prestigious R&D 100 Awards from R&D Magazine for 2007. "Once again, we are at the cutting edge of innovation with new technology developments that enhance America's economic and national security," said Thomas Shope, DOE's Acting Assistant Secretary for Fossil Energy. "My heartiest congratulations to the NETL researchers and scientists that have won R&D Magazine's prestigious awards this year." According to R&D Magazine, the goal of the awards is to spotlight major breakthroughs - products and processes with the capacity to improve the standard of living for many people. Since 1963, R&D Magazine has annually awarded R&D 100 Awards to the 100 most technologically significant new products to hit the market.

Note: This page contains sample records for the topic "fixed support technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Program August 2010 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Fuel Cell Technologies Program iii Table of Contents Summary ...............................................................................................................................................................................v 1.0 Introduction ............................................................................................................................................................... 1-1 1.1 Organization of the FCT Program ..................................................................................................................

22

Inventorying Information Technology Systems: Supporting the "Paradigm of Change"  

Science Conference Proceedings (OSTI)

Information technology systems permeate organizations, supporting almost everything--apart from managing IT items themselves. Although software-configuration-management systems can provide some management assistance, they arent designed to handle the ... Keywords: enterprise asset classes, software economics, asset management, IT portfolio managemen

Mordechai Ben-Menachem; Garry S. Marliss

2004-09-01T23:59:59.000Z

23

Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Program - 2012  

Fuel Cell Technologies Publication and Product Library (EERE)

This FY 2012 report updates the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Fuel Cell T

24

Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Program - 2011  

Fuel Cell Technologies Publication and Product Library (EERE)

This FY 2011 report updates the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Fuel Cell

25

Technology Integration Initiative In Support of Outage Management  

SciTech Connect

Plant outage management is a high priority concern for the nuclear industry from cost and safety perspectives. Often, command and control during outages is maintained in the outage control center where many of the underlying technologies supporting outage control are the same as those used in the 1980s. This research reports on the use of advanced integrating software technologies and hand held mobile devices as a means by which to reduce cycle time, improve accuracy, and enhance transparency among outage team members. This paper reports on the first phase of research supported by the DOE Light Water Reactor Sustainability (LWRS) Program that is performed in close collaboration with industry to examine the introduction of newly available technology allowing for safe and efficient outage performance. It is thought that this research will result in: improved resource management among various plant stakeholder groups, reduced paper work, and enhanced overall situation awareness for the outage control center management team. A description of field data collection methods, including personnel interview data, success factors, end-user evaluation and integration of hand held devices in achieving an integrated design are also evaluated. Finally, the necessity of obtaining operations cooperation support in field studies and technology evaluation is acknowledged.

Gregory Weatherby; David Gertman

2012-07-01T23:59:59.000Z

26

Technologies for Plant Operations and Maintenance Support: A Plan for Technology Development and Implementation  

Science Conference Proceedings (OSTI)

Electronic performance support systems (EPSSs) have important potential for increasing the efficiency and quality of operations and maintenance (O&M) work. This report cites a series of rapidly evolving technologies for possible application in nuclear power plants, including technologies that can assist in the shrinking workforce problem for the nuclear power industry. Also included is a futuristic scenario of a maintenance technician using several of these new technologies to perform daily tasks efficie...

2002-03-25T23:59:59.000Z

27

fixed2  

NLE Websites -- All DOE Office Websites (Extended Search)

Part Deux Part Deux Painless Physics Articles BEAM COOLING August 2, 1996 By Leila Belkora, Office of Public Affairs ACCELERATION August 16, 1996 By Dave Finley, Accelerator Division Head RF August 30, 1996 By Pat Colestock, Accelerator Division FIXED TARGET PHYSICS September 20, 1996 By Peter H. Garbincius, Physics Section FIXED TARGET PHYSICS PART DEUX October 16, 1996 By Peter H. Garbincius, Physics Section and Leila Belkora, Office of Public Affaris CROSS SECTION November 1, 1996 By Doreen Wackeroth, Theoretical Physics Edited by Leila Belkora, Office of Public Affaris MAGNETS PART I November 15, 1996 By Hank Glass, Technical Support Section Edited by Donald Sena, Office of Public Affairs MAGNETS PART II January 10, 1997 By Hank Glass, Technical Support Section Edited by Donald Sena, Office of Public Affairs

28

Separations technologies supporting the development of a deployable ATW system  

Science Conference Proceedings (OSTI)

A program has been initiated for the purpose of developing the chemical separations technologies necessary to support a large Accelerator Transmutation of Waste (ATW) system capable of dealing with the projected inventory of spent fuel from the commercial nuclear power stations in the United States. The first several years of the program will be directed toward an elucidation of related technical issues and to the establishment, by means of comprehensive trade studies, of an optimum configuration of the elements of the chemical processing infrastructure required for support of the total ATW system. By adopting this sort of disciplined systems engineering approach, it is expected that development and demonstration costs can be minimized and that it will be possible to deploy an ATW system that is an environmentally sound and economically viable venture.

Laidler, J. J.

2000-01-07T23:59:59.000Z

29

Fostering a Renewable Energy Technology Industry: An International Comparison of Wind Industry Policy Support Mechanisms  

E-Print Network (OSTI)

supportive government policies to promote wind energyPolicy and Renewable Energy Technology. Proceedings of the 2003 Conference on Government

Lewis, Joanna; Wiser, Ryan

2005-01-01T23:59:59.000Z

30

Comparison of Energy Production and Performance from Flat-Plate Photovoltaic Module Technologies Deployed at Fixed Tilt: Preprint  

DOE Green Energy (OSTI)

This conference paper describes the performance data for 14 photovoltaic modules deployed at fixed-latitude tilt in the field are presented and compared. Module performance is monitored continuously for optimum power characteristics. Flat-plate module technologies representative of crystalline, amorphous, and polycrystalline silicon, and cadmium telluride and copper indium diselenide, are scrutinized for energy production, effective efficiency and performance ratio-ratio of effective to reference efficiency. Most performance ratios exhibit seasonal fluctuations largely correlated to air or module temperatures, varying between 80% and 100%. These ratios tend toward larger values during winter and vise versa, except for amorphous silicon and cadmium telluride modules. In a-Si cases, the situation appears reversed: better performance ratios are exhibited during late summer. The effective efficiency and average daily and yearly energy production are analyzed and quantified.

del Cueto, J. A.

2002-05-01T23:59:59.000Z

31

Environmental Energy Technologies Division Electricity Markets and Policy Group Supporting Solar Power in  

E-Print Network (OSTI)

Environmental Energy Technologies Division Electricity Markets and Policy Group Supporting Solar the impact of RPS policies on solar growth 2 #12;Environmental Energy Technologies Division Electricity by: the Office of Energy Efficiency and Renewable Energy (Solar Energy Technologies Program

32

Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Office  

NLE Websites -- All DOE Office Websites (Extended Search)

OFFICE OFFICE Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Office September 2013 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Fuel Cell Technologies Office Notice This report is being disseminated by the Department of Energy. As such, this document was prepared in compliance with Section 515 of the Treasury and General Government Appropriations Act for Fiscal Year 2001(Public Law 106-554) and information quality guidelines issued by the Department of Energy. Neither the United States government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness

33

Systems integration and analysis of advanced life support technologies  

E-Print Network (OSTI)

Extended missions to space have long been a goal of the National Aeronautics and Space Administration (NASA). Accomplishment of NASA's goal requires the development of systems and tools for sustaining human life for periods of several months to several years. This is the primary objective of NASA's Advanced Life Support (ALS) program. This work contributes directly to NASA efforts for ALS, particularly food production. The objective of this work is to develop a systematic methodology for analyzing and improving or modifying ALS technologies to increase their acceptability for implementation in long-duration space missions. By focusing primarily on the food production systems, it is an aim of this work to refine the procedure for developing and analyzing the ALS technologies. As a result of these efforts, researchers will have at their disposal, a powerful tool for establishing protocols for each technology as well as for modifying each technology to meet the standards for practical applications. To automate the developed methodology and associated calculations, a computer-aided tool has been developed. The following systematic procedures are interrelated and automatically integrated into the computer-aided tool: Process configuration, with particular emphasis given to food production (e.g., syrup and flour from sweet potato, starch from sweet potato, breakfast cereal from sweet potato); Modeling and analysis for mass and energy tracking and budgeting; Mass and energy integration Metrics evaluation (e.g., Equivalent System Mass (ESM)). Modeling and analysis is achieved by developing material- and energy-budgeting models. Various forms of mass and energy are tracked through fundamental as well as semiempirical models. Various system alternatives are synthesized and screened using ESM and other metrics. The results of mass, energy and ESM analyses collectively revealed the major consumers of time, equivalent mass, and energy, namely evaporation, condensation, dehydration, drying and extrusion. The targeted processes were subsequently targeted for modifications. In conclusion, this work provides a systematic methodology for transforming non-conventional problems into traditional engineering design problems, a significant contribution to ALS studies.

Nworie, Grace A.

2006-08-01T23:59:59.000Z

34

Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Program  

SciTech Connect

The purpose of the project described in this report is to identify and document the commercial and emerging (projected to be commercialized within the next 3 years) hydrogen and fuel cell technologies and products that resulted from Department of Energy support through the Fuel Cell Technologies (FCT) Program in the Office of Energy Efficiency and Renewable Energy (EERE). To do this, Pacific Northwest National Laboratory (PNNL) undertook two efforts simultaneously to accomplish this project. The first effort was a patent search and analysis to identify hydrogen- and fuel-cell-related patents that are associated with FCT-funded projects (or projects conducted by DOE-EERE predecessor programs) and to ascertain the patents current status, as well as any commercial products that may have used the technology documented in the patent. The second effort was a series of interviews with current and past FCT personnel, a review of relevant program annual reports, and an examination of hydrogen- and fuel-cell-related grants made under the Small Business Innovation Research and Small Business Technology Transfer Programs, and within the FCT portfolio.

Weakley, Steven A.; Brown, Scott A.

2011-09-29T23:59:59.000Z

35

Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Program  

DOE Green Energy (OSTI)

The purpose of the project described in this report is to identify and document the commercial and emerging (projected to be commercialized within the next 3 years) hydrogen and fuel cell technologies and products that resulted from Department of Energy support through the Fuel Cell Technologies (FCT) Program in the Office of Energy Efficiency and Renewable Energy (EERE). Pacific Northwest National Laboratory (PNNL) undertook two efforts simultaneously to accomplish this project. The first effort was a patent search and analysis to identify patents related to hydrogen and fuel cells that are associated with FCT-funded projects (or projects conducted by DOE-EERE predecessor programs) and to ascertain the patents current status, as well as any commercial products that may have used the technology documented in the patent. The second effort was a series of interviews with current and past FCT personnel, a review of relevant program annual reports, and an examination of grants made under the Small Business Innovation Research and Small Business Technology Transfer Programs that are related to hydrogen and fuel cells.

Weakley, Steven A.

2012-09-28T23:59:59.000Z

36

Performance and Cost Model for Solar Energy Technologies in Support of the Systems-Driven Approach  

DOE Green Energy (OSTI)

A comprehensive solar technology systems analysis model is being developed to support the implementation of the systems driven approach to program planning for the U.S. Department of Energy's Solar Energy Technologies Program (SETP). Use of this systems model, together with technology and cost benchmarking, market penetration analysis, and other relevant considerations, will support the development of program priorities and direction, and the subsequent investment needed to support R&D activities.

Mehos, M.; Mooney, D.

2005-01-01T23:59:59.000Z

37

Contracts for field projects and supporting research on enhanced oil recovery and improved drilling technology  

Science Conference Proceedings (OSTI)

Objectives are listed and technical progress is summarized for contracts for field projects and supporting research on: chemical flooding, carbon dioxide injection, thermal/heavy oil, extraction technology, improved drilling technology, residual oil, and microbial enhanced oil recovery. (DLC)

Linville, B. (ed.)

1980-10-01T23:59:59.000Z

38

SECURITY METRICS: MEASUREMENTS TO SUPPORT THE CONTINUED DEVELOPMENT OF INFORMATION SECURITY TECHNOLOGY  

E-Print Network (OSTI)

SECURITY METRICS: MEASUREMENTS TO SUPPORT THE CONTINUED DEVELOPMENT OF INFORMATION SECURITY TECHNOLOGY Shirley Radack, Editor Computer Security Division Information Technology Laboratory National and to protect their systems and information from security threats and risks. There have been many past efforts

39

Support of Study on Engineering Technology from Physics and Mathematics  

E-Print Network (OSTI)

An approach that provides students with an ability to transfer learning in physics and mathematics to the engineering-technology courses through e-teaching and e-learning process is proposed. E-modules of courses in mathematics, physics, computer systems technology, and electrical and telecommunications engineering technology have been developed. These modules being used in the Blackboard and Web-based communications systems create a virtual interdisciplinary learning community, which helps the students to transfer knowledge from physics and mathematics to their study in engineering technology.

Mynbaev, Djafar K; Kezerashvili, Roman Ya; Liou-Mark, Janet

2008-01-01T23:59:59.000Z

40

Ambient intelligence technologies in support of shipping markets' operations  

Science Conference Proceedings (OSTI)

The Intelligent Maritime Environment (i-MARE) framework and technological platform we introduce in our paper conceptualize an innovative, collaborative and context-aware network business model for cargo shipping. The i-MARE framework considers ambient-intelligence ... Keywords: Agent technology, Ambient intelligence, Cargo shipping operations, Enterprise modelling, Web semantics

Maria A. Lambrou; Kay Endre Fjrtoft; Efstathios D. Sykas; Nikitas Nikitakos

2008-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "fixed support technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Pathways to Commercial Success: Technologies and Products Supported by the Hydrogen, Fuel Cells and Infrastructure Technologies Program  

Fuel Cell Technologies Publication and Product Library (EERE)

This report documents the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Hydrogen, Fuel Ce

42

DOE Announces $87 Million in Funding to Support Solar Energy Technologies |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

$87 Million in Funding to Support Solar Energy $87 Million in Funding to Support Solar Energy Technologies DOE Announces $87 Million in Funding to Support Solar Energy Technologies October 8, 2009 - 12:00am Addthis WASHINGTON, DC - At the opening of the U.S. Department of Energy's Solar Decathlon on the National Mall, Energy Secretary Steven Chu announced up to $87 million will be made available to support the development of new solar energy technologies and the rapid deployment of available carbon-free solar energy systems. Of this funding, $50 million comes from the American Recovery and Reinvestment Act. The 47 projects with universities, electric power utilities, DOE's National Laboratories, and local governments have been selected to support use of solar technologies in U.S. cities, help address technical challenges, ensure reliable connectivity

43

Hot Air? When Government Support for Intermittent Renewable Technologies can Increase Emissions  

E-Print Network (OSTI)

This paper analyzes the eects of an intermittent technology on long-run incentives for investment in non-renewable electricity generation technologies. I nd conditions under which supporting an intermittent technology may in fact increase carbon emissions. The variability of load usually determines the long run mix of generating technologies in a competitive electricity market. When there is a signicant amount of intermittent production the mix of other generating technologies is determined by the variability of net load (load net of intermittent output). Net load may be more variable than load itself if the intermittent output is not too positively correlated with load. This increase in variability results in a substitution away from baseload generating technologies towards peaking and intermediate technologies. If peaking and intermediate technologies are more carbon intensive than non-renewable "baseload " technologies, this substitution can more than oset the emission benets derived from the output of the renewable technology. 1

Arthur Campbell

2008-01-01T23:59:59.000Z

44

Separations technology development to support accelerator-driven transmutation concepts  

SciTech Connect

This is the final report of a one-year Laboratory-Directed Research and Development (LDRD) Project at the Los Alamos National Laboratory (LANL). This project investigated separations technology development needed for accelerator-driven transmutation technology (ADTT) concepts, particularly those associated with plutonium disposition (accelerator-based conversion, ABC) and high-level radioactive waste transmutation (accelerator transmutation of waste, ATW). Specific focus areas included separations needed for preparation of feeds to ABC and ATW systems, for example from spent reactor fuel sources, those required within an ABC/ATW system for material recycle and recovery of key long-lived radionuclides for further transmutation, and those required for reuse and cleanup of molten fluoride salts. The project also featured beginning experimental development in areas associated with a small molten-salt test loop and exploratory centrifugal separations systems.

Venneri, F.; Arthur, E.; Bowman, C. [and others

1996-10-01T23:59:59.000Z

45

DOE supported research in alcohol fuel technology development  

Science Conference Proceedings (OSTI)

The Department of Energy sponsored research in alcohol fuel technology development under the direction of Congress and Public Law 96-126. Twenty-seven research grants of about $50,000 each were funded to develop lower cost methods for alcohol fuel production. This paper discusses the objectives of the program and relates the accomplishments achieved by the research. A discussion of the highlights of several selected projects is included.

Dodds, J.

1984-01-01T23:59:59.000Z

46

Application of Storage Technology for Transmission System Support: Interim Report  

Science Conference Proceedings (OSTI)

The Electric Power Research Institute (EPRI) research in 2011 explored the potential use of battery storage to increase transmission capability in thermal limited transmission paths, an application of energy storage technology that has not been investigated in detail in prior research (see EPRI report 1024586). Researchers performed a conceptual analysis of how batteries connected at either the sending or the receiving end of a congested corridor can be used to increase the transmission capability ...

2012-12-31T23:59:59.000Z

47

And the Award Goes to... Silicon Ink Solar Technology Supported by  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

And the Award Goes to... Silicon Ink Solar Technology Supported by And the Award Goes to... Silicon Ink Solar Technology Supported by SunShot's PV Incubator And the Award Goes to... Silicon Ink Solar Technology Supported by SunShot's PV Incubator July 19, 2011 - 5:00pm Addthis Innovalight’s silicon ink technology | Photo courtesy of Innovalight Innovalight's silicon ink technology | Photo courtesy of Innovalight What does this mean for me? Pioneering startup Innovalight partnered with NREL to invent the first liquid silicon on the market. When paired with Innovalight's industrial screen printing process, this silicon ink technology offers a novel path to producing solar cells with higher conversion efficiencies at lower cost. A pair of presenters approach the microphone carrying a sealed envelope, a faint drum roll is heard, cameras zoom in on the anxious faces of the

48

And the Award Goes to... Silicon Ink Solar Technology Supported by  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

And the Award Goes to... Silicon Ink Solar Technology Supported by And the Award Goes to... Silicon Ink Solar Technology Supported by SunShot's PV Incubator And the Award Goes to... Silicon Ink Solar Technology Supported by SunShot's PV Incubator July 19, 2011 - 5:00pm Addthis Innovalight’s silicon ink technology | Photo courtesy of Innovalight Innovalight's silicon ink technology | Photo courtesy of Innovalight What does this mean for me? Pioneering startup Innovalight partnered with NREL to invent the first liquid silicon on the market. When paired with Innovalight's industrial screen printing process, this silicon ink technology offers a novel path to producing solar cells with higher conversion efficiencies at lower cost. A pair of presenters approach the microphone carrying a sealed envelope, a faint drum roll is heard, cameras zoom in on the anxious faces of the

49

NREL: Technology Deployment - NREL's Federal Fueling Station Data Supports  

NLE Websites -- All DOE Office Websites (Extended Search)

NREL's Federal Fueling Station Data Supports Superstorm Sandy Recovery NREL's Federal Fueling Station Data Supports Superstorm Sandy Recovery January 22, 2013 In the aftermath of Superstorm Sandy, millions of Americans remained without electricity as emergency responders, security officials, and regular citizens all experienced a lack of access to vehicle fuels. As fuel shortages spread and lines grew at the few fueling stations that had electricity, officials from General Services Administration (GSA) Fleet and the U.S. Department of Homeland Security's (DHS) National Protection and Programs Directorate contacted the U.S. Department of Energy's (DOE) Federal Energy Management Program (FEMP) hoping to locate additional fuel provisions from private and federal facilities. FEMP then tapped NREL to provide data on the locations of federally owned fueling infrastructure in

50

Capabilities to Support Thermochemical Hydrogen Production Technology Development  

DOE Green Energy (OSTI)

This report presents the results of a study to determine if Idaho National Laboratory (INL) has the skilled staff, instrumentation, specialized equipment, and facilities required to take on work in thermochemical research, development, and demonstration currently being performed by the Nuclear Hydrogen Initiative (NHI). This study outlines the beneficial collaborations between INL and other national laboratories, universities, and industries to strengthen INL's thermochemical efforts, which should be developed to achieve the goals of the NHI in the most expeditious, cost effective manner. Taking on this work supports INL's long-term strategy to maintain leadership in thermochemical cycle development. This report suggests a logical path forward to accomplish this transition.

Daniel M. Ginosar

2009-05-01T23:59:59.000Z

51

Commercialization effort in support of electroslag-casting technology  

SciTech Connect

This report summarizes the results of an effort to revive interest in the electroslag casting (ESC) of components in the United States. The ESC process is an extension of a well established electroslag-remelting (ESR) process. Both processes use the electrode of a material that is continuously melted and cast in a water-cooled copper mold. For simple shapes, the mold can be movable, allowing the continuous casting of long lengths. In an effort to revive US industries` interest in ESC, the following approaches were taken: (1) US industries with prior experience in ESC or currently operating an ESR unit were contacted, followed up with telephone conversation, and/or sent copies of prior published reports on the topic, and, in some cases, personal visits were made; (2) with two companies, a potential interest in ESC was worked out by initially conducting ESR; and (3) to further strengthen the industrial interest, the newly developed iron-aluminide alloy, FA-129, was chosen as the material of choice for this study. The two industrial companies that worked with ORNL were Special Metals Corporation (New Hartford, New York) and Precision Rolled Products, Inc. (PRP) [Florham Park, New Jersey]. Even with its advantages, a survey of the industry indicated that ESC technology has a very limited chance of advancement in the United States. However, the processing of rounds and slabs by the ESR process is a well established commercial technology and will continue to expand. 16 figs, 3 tabs, 12 refs.

Sikka, V.K.

1993-06-01T23:59:59.000Z

52

Buildings R&D Breakthroughs: Technologies and Products Supported by the Building Technologies Program  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Buildings R&D Breakthroughs: Technologies and Products Supported by the Building Technologies Program April 2012 Table of Contents Executive Summary ����������������������������������������������������������������������������������������������������������������������������������������������������������� v 1.0 Introduction���������������������������������������������������������������������������������������������������������������������������������������������������������������� 1-1

53

Independent Assessment of Technology Characterizations to Support the Biomass Program Annual State-of-Technology Assessments  

DOE Green Energy (OSTI)

This report discusses an investigation that addressed two thermochemical conversion pathways for the production of liquid fuels and addressed the steps to the process, the technology providers, a method for determining the state of technology and a tool to continuously assess the state of technology. This report summarizes the findings of the investigation as well as recommendations for improvements for future studies.

Yeh, B.

2011-03-01T23:59:59.000Z

54

DOE Provides $4.7 Million to Support Excellence in Automotive Technology  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4.7 Million to Support Excellence in Automotive 4.7 Million to Support Excellence in Automotive Technology Education DOE Provides $4.7 Million to Support Excellence in Automotive Technology Education August 29, 2005 - 2:47pm Addthis WASHINGTON, DC - The U.S. Department of Energy today announced the selection of eight universities that will receive $4.7 million to be Graduate Automotive Technology Education (GATE) Centers of Excellence. The goal of GATE is to train a future workforce of automotive engineering professionals to overcome technology barriers preventing the development and production of cost-effective, high-efficiency vehicles for the U.S. market. "GATE Centers of Excellence are an exciting opportunity to equip a new generation of engineers and scientists with knowledge and skills in advanced automotive technologies," said Douglas L. Faulkner, Acting

55

Autonomous, agile micro-satellites and supporting technologies  

DOE Green Energy (OSTI)

This paper updates the on-going effort at Lawrence Livermore National Laboratory to develop autonomous, agile micro-satellites (MicroSats). The objective of this development effort is to develop MicroSats weighing only a few tens of kilograms, that are able to autonomously perform precision maneuvers and can be used telerobotically in a variety of mission modes. The required capabilities include satellite rendezvous, inspection, proximity-operations, docking, and servicing. The MicroSat carries an integrated proximity-operations sensor-suite incorporating advanced avionics. A new self-pressurizing propulsion system utilizing a miniaturized pump and non-toxic mono-propellant hydrogen peroxide was successfully tested. This system can provide a nominal 25 kg MicroSat with 200-300 m/s delta-v including a warm-gas attitude control system. The avionics is based on the latest PowerPC processor using a CompactPCI bus architecture, which is modular, high-performance and processor-independent. This leverages commercial-off-the-shelf (COTS) technologies and minimizes the effects of future changes in processors. The MicroSat software development environment uses the Vx-Works real-time operating system (RTOS) that provides a rapid development environment for integration of new software modules, allowing early integration and test. We will summarize results of recent integrated ground flight testing of our latest non-toxic pumped propulsion MicroSat testbed vehicle operated on our unique dynamic air-rail.

Breitfeller, E; Dittman, M D; Gaughan, R J; Jones, M S; Kordas, J F; Ledebuhr, A G; Ng, L C; Whitehead, J C; Wilson, B

1999-07-19T23:59:59.000Z

56

Supporting technology for enhanced oil recovery: EOR thermal processes  

Science Conference Proceedings (OSTI)

This report contains the results of efforts under the six tasks of the Seventh Amendment and Extension of Annex IV, Enhanced Oil Recovery Thermal Processes of the Venezuela/USA Agreement. The report is presented in sections (for each of the 6 tasks) and each section contains one or more reports prepared by various individuals or groups describing the results of efforts under each of the tasks. A statement of each task, taken from the agreement, is presented on the first page of each section. The tasks are numbered 50 through 55. The first, second, third, fourth, fifth, sixth and seventh reports on Annex IV, Venezuela MEM/USA-DOE Fossil Energy Report IV-1, IV-2, IV-3, IV-4, IV-5 and IV-6 (DOE/BETC/SP-83/15, DOE/BC-84/6/SP, DOE/BC-86/2/SP, DOE/BC-87/2/SP, DOE/BC-89/l/SP, DOE/BC-90/l/SP, and DOE/BC-92/l/SP) contain the results for the first 49 tasks. Those reports are dated April 1983, August 1984, March 1986, July 1987, November 1988, December 1989, and October 1991, respectively. Each task report has been processed separately for inclusion in the Energy Science and Technology Database.

Reid, T.B. (USDOE Bartlesville Project Office, OK (United States)); Colonomos, P. (INTEVEP, Filial de Petroleos de Venezuela, SA, Caracas (Venezuela))

1993-02-01T23:59:59.000Z

57

Unified methodology of neural analysis in decision support systems built for pharmaceutical technology  

Science Conference Proceedings (OSTI)

The objective of this study was to create universal methodology of artificial neural networks (ANNs) application in construction of decision support systems designed for various dosage forms. Two different dosage forms (solid dispersions and microemulsions) ... Keywords: Artificial neural networks, Decision support systems, Microemulsions, Pharmaceutical technology, Solid dispersions, Unified methodology

Aleksander Mendyk; Renata Jachowicz

2007-05-01T23:59:59.000Z

58

technology offer Vienna University of Technology | Research and Transfer Support | Claudia Doubek  

E-Print Network (OSTI)

of platforms for solar power plants on the open sea. The system is able to cope with wind and waves and thus.doubek@tuwien.ac.at | http://www.rt.tuwien.ac.at Offshore Platforms for Solar Power Plants Light-weight construction), who are concentrating on novel technologies for floating Solar Power Plants. Technology Light

Szmolyan, Peter

59

Advanced Turbine Technology Applications Project (ATTAP) and Hybrid Vehicle Turbine Engine Technology Support project (HVTE-TS): Final summary report  

DOE Green Energy (OSTI)

This final technical report was prepared by Rolls-Royce Allison summarizing the multiyear activities of the Advanced Turbine Technology Applications Project (ATTAP) and the Hybrid Vehicle Turbine Engine Technology Support (HVTE-TS) project. The ATTAP program was initiated in October 1987 and continued through 1993 under sponsorship of the US Department of Energy (DOE), Energy Conservation and Renewable Energy, Office of Transportation Technologies, Propulsion Systems, Advanced Propulsion Division. ATTAP was intended to advance the technological readiness of the automotive ceramic gas turbine engine. The target application was the prime power unit coupled to conventional transmissions and powertrains. During the early 1990s, hybrid electric powered automotive propulsion systems became the focus of development and demonstration efforts by the US auto industry and the Department of energy. Thus in 1994, the original ATTAP technology focus was redirected to meet the needs of advanced gas turbine electric generator sets. As a result, the program was restructured to provide the required hybrid vehicle turbine engine technology support and the project renamed HVTE-TS. The overall objective of the combined ATTAP and HVTE-TS projects was to develop and demonstrate structural ceramic components that have the potential for competitive automotive engine life cycle cost and for operating 3,500 hr in an advanced high temperature turbine engine environment. This report describes materials characterization and ceramic component development, ceramic components, hot gasifier rig testing, test-bed engine testing, combustion development, insulation development, and regenerator system development. 130 figs., 12 tabs.

NONE

1998-12-01T23:59:59.000Z

60

NETL: News Release - DOE-Supported Coal Cleaning Technology Succeeds in  

NLE Websites -- All DOE Office Websites (Extended Search)

4, 2011 4, 2011 DOE-Supported Coal Cleaning Technology Succeeds in Commercial Demonstration Novel Centrifuge Paves Way to Recover Tons of Waste Coal for Energy Use Washington, DC -- A novel technology that could help release some of the currently unusable energy in an estimated 2 billion tons of U.S. coal waste has been successfully demonstrated by a Department of Energy (DOE) supported project. The full-scale test of the advanced hyperbaric centrifuge technology at a Jim Walter Resources Inc. coal-cleaning plant in Alabama resulted in the successful reduction of moisture from ultrafine coal waste. The test builds on an eight-year cooperative effort between the Office of Fossil Energy's (FE) National Energy Technology Laboratory (NETL) and the Virginia Polytechnic Institute and State University (Virginia Tech) to use the patented process to effectively remove water from very fine coal "slurries," or mixture of waste coal "fines" and water.

Note: This page contains sample records for the topic "fixed support technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

technology offer Vienna University of Technology | Research and Transfer Support | Claudia Doubek  

E-Print Network (OSTI)

of material handling devices Testing of dynamic system behaviour (rapid changes from loading to unloading Storage (TES) | Sand | Fluidized Bed | Ash Cooler Volatility of renewable energy generation asks for efficient thermal energy storage systems (TES). The novel TES of Vienna University of Technology (VUT

Szmolyan, Peter

62

technology offer Vienna University of Technology | Research and Transfer Support | Claudia Doubek  

E-Print Network (OSTI)

handling devices Testing of dynamic system behaviour (rapid changes from loading to unloading, system Storage (TES) | Sand | Fluidized Bed | Ash Cooler Volatility of renewable energy generation asks for efficient thermal energy storage systems (TES). The novel TES of Vienna University of Technology (VUT

Szmolyan, Peter

63

technology offer Vienna University of Technology | Research and Transfer Support | Claudia Doubek  

E-Print Network (OSTI)

. Background The need of big surfaces for concentrating solar power plants in densely populated Europe and water waves is minimized by open bottom flexible membrane air cushions. The platform height allows waves Minimized bending stress of top platform Height compensation through pneumatic support minimizing wave

Szmolyan, Peter

64

NREL Supports Development of New National Code for Hydrogen Technologies (Fact Sheet)  

SciTech Connect

On December 14, 2010, the National Fire Protection Association (NFPA) issued a new national code for hydrogen technologies - NFPA 2 Hydrogen Technologies Code - which covers critical applications and operations such as hydrogen dispensing, production, and storage. The new code consolidates existing hydrogen-related NFPA codes and standards requirements into a single document and also introduces new requirements. This consolidation makes it easier for users to prepare code-compliant permit applications and to review/approve these applications. The National Renewable Energy Laboratory helped support the development of NFPA 2 on behalf of the U.S. Department of Energy Fuel Cell Technologies Program.

Not Available

2010-12-01T23:59:59.000Z

65

Program on Technology Innovation: Use of Visualization Technology to Support Valuable Knowledge Capture and Delivery  

Science Conference Proceedings (OSTI)

Pressurizer room and valve virtual modelssimulating three-dimensions (3-D) based on virtual reality (VR) technologyhave successfully been applied to weld overlay and valve maintenance jobs. The models were available to support valuable knowledge capture and job planning as well as worker orientation and training. This report presents results of the project, which was conducted at the Luminant Energy Comanche Peak Nuclear Power Plant.

2008-11-20T23:59:59.000Z

66

Development of Supported Polymeric Liquid Membrane Technology for Aqueous MTBE Mitigation  

Science Conference Proceedings (OSTI)

The use of MTBE (methyl tert-butyl ether) as a gasoline additive has generated a serious, widespread groundwater contamination problem in California. This study evaluated the use of supported polymeric liquid membrane technology in the remediation of MTBE contaminated groundwater.

2002-07-02T23:59:59.000Z

67

The [216:1 Ratio]: bridging the growing support gap through proactive deployment of emerging technologies  

Science Conference Proceedings (OSTI)

Philadelphia University has developed radically as an entity since 1992. In 2002-2003, the University technology infrastructure was forced to evolve in response to selective pressure from a series of catastrophic worm (Blaster, Nachi, Sasser) incidents ... Keywords: adaptive networking, adaptive support, antivirus, malware, network access standardization, network security, personal computer security, preventative computing, remediation, spyware, updates, virus

Johnathon A. Mohr

2006-11-01T23:59:59.000Z

68

Geothermal Technologies Program Geoscience and Supporting Technologies 2001 University Research Summaries  

SciTech Connect

The U.S. Department of Energy Office of Wind and Geothermal Technologies (DOE) is funding advanced geothermal research through University Geothermal Research solicitations. These solicitations are intended to generate research proposals in the areas of fracture permeability location and characterization, reservoir management and geochemistry. The work funded through these solicitations should stimulate the development of new geothermal electrical generating capacity through increasing scientific knowledge of high-temperature geothermal systems. In order to meet this objective researchers are encouraged to collaborate with the geothermal industry. These objectives and strategies are consistent with DOE Geothermal Energy Program strategic objectives.

Creed, Robert John; Laney, Patrick Thomas

2002-06-01T23:59:59.000Z

69

Geothermal Technologies Program Geoscience and Supporting Technologies 2001 University Research Summaries  

DOE Green Energy (OSTI)

The U.S. Department of Energy Office of Wind and Geothermal Technologies (DOE) is funding advanced geothermal research through University Geothermal Research solicitations. These solicitations are intended to generate research proposals in the areas of fracture permeability location and characterization, reservoir management and geochemistry. The work funded through these solicitations should stimulate the development of new geothermal electrical generating capacity through increasing scientific knowledge of high-temperature geothermal systems. In order to meet this objective researchers are encouraged to collaborate with the geothermal industry. These objectives and strategies are consistent with DOE Geothermal Energy Program strategic objectives.

Creed, R.J.; Laney, P.T.

2002-05-14T23:59:59.000Z

70

Hybrid vehicle turbine engine technology support (HVTE-TS) project. 1995--1996 annual report  

DOE Green Energy (OSTI)

This report presents a summary of technical work accomplished on the Hybrid Vehicle Turbine Engine--Technology Support (HVTE-TS) Project during calendar years 1995 and 1996. Work was performed under an initial National Aeronautics and Space Administration (NASA) contract DEN3-336. As of September 1996 the contract administration was transferred to the US Department of Energy (DoE) Chicago Operations Office, and renumbered as DE-AC02-96EE50553. The purpose of the HVTE-TS program is to develop gas turbine engine technology in support of DoE and automotive industry programs exploring the use of gas turbine generator sets in hybrid-electric automotive propulsion systems. The program focus is directed to the development of four key technologies to be applied to advanced turbogenerators for hybrid vehicles: Structural ceramic materials and processes; Low emissions combustion systems; Regenerators and seals systems; and Insulation systems and processes. 60 figs., 9 tabs.

NONE

1996-12-31T23:59:59.000Z

71

Support  

NLE Websites -- All DOE Office Websites (Extended Search)

WIPP Support Double Beta Decay Dark Matter Biology Repository Science Renewable Energy Community, State and Congressional Support for WIPP as a host for Underground Experiments...

72

Management support services to the Office of Utility Technologies. Final technical report  

DOE Green Energy (OSTI)

The Office of Utility Technologies works cooperatively with industry and the utility sector to realize the market potential for energy efficiency and renewable energy technologies. Under this contract, BNF has provided management support services for OUT R&D activities for the following Program offices: (1) Office of Energy Management; (2) Office of Solar Energy Conversion; (3) Office of Renewable Energy Conversion; and (4) Deputy Assistant Secretary. During the period between 4/17/91 and 9/17/93, BNF furnished the necessary personnel, equipment, materials, facilities and travel required to provide management support services for each of the above Program Offices. From 9/18/93 to 12/17/93, BNF has been involved in closeout activities, including final product deliverables. Research efforts that have been supported in these Program Offices are: (1) for Energy Management -- Advanced Utility Concepts Division; Utility Systems Division; Integrated Planning; (2) for Solar Energy Conversion -- Photovoltaics Division; Solar Thermal and Biomass Power Division; (3) for Renewable Energy Conversion -- Geothermal Division; Wind, Hydroelectric and Ocean Systems Division; (4) for the Deputy Assistant Secretary -- support as required by the Supporting Staff. This final report contains summaries of the work accomplished for each of the Program Offices listed above.

Not Available

1993-12-16T23:59:59.000Z

73

Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Program  

NLE Websites -- All DOE Office Websites (Extended Search)

2 2 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Fuel Cell Technologies Program iii Table of Contents Summary ������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� v 1.0 Introduction ����������������������������������������������������������������������������������������������������������������������������������������������������������������

74

2011 Pathways to Commercial Success: Technologies and Products Supported by the Fuel Cell Technologies Program  

NLE Websites -- All DOE Office Websites (Extended Search)

1 1 Prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy Fuel Cell Technologies Program iii Table of Contents Summary ������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� v 1.0 Introduction ����������������������������������������������������������������������������������������������������������������������������������������������������������������

75

Advanced Materials in Support of EERE Needs to Advance Clean Energy Technologies Program Implementation  

SciTech Connect

The goal of this activity was to carry out program implementation and technical projects in support of the ARRA-funded Advanced Materials in Support of EERE Needs to Advance Clean Energy Technologies Program of the DOE Advanced Manufacturing Office (AMO) (formerly the Industrial Technologies Program (ITP)). The work was organized into eight projects in four materials areas: strategic materials, structural materials, energy storage and production materials, and advanced/field/transient processing. Strategic materials included work on titanium, magnesium and carbon fiber. Structural materials included work on alumina forming austentic (AFA) and CF8C-Plus steels. The advanced batteries and production materials projects included work on advanced batteries and photovoltaic devices. Advanced/field/transient processing included work on magnetic field processing. Details of the work in the eight projects are available in the project final reports which have been previously submitted.

Liby, Alan L [ORNL] [ORNL; Rogers, Hiram [ORNL] [ORNL

2013-10-01T23:59:59.000Z

76

Technical Support Document: 50% Energy Savings Design Technology Packages for Highway Lodging Buildings  

SciTech Connect

This Technical Support Document (TSD) describes the process, methodology and assumptions for development of the 50% Energy Savings Design Technology Packages for Highway Lodging Buildings, a design guidance document intended to provide recommendations for achieving 50% energy savings in highway lodging properties over the energy-efficiency levels contained in ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings.

Jiang, Wei; Gowri, Krishnan; Lane, Michael D.; Thornton, Brian A.; Rosenberg, Michael I.; Liu, Bing

2009-09-28T23:59:59.000Z

77

Technology transfer support services to the Carbon Dioxide Research Division, US Department of Energy  

SciTech Connect

The US Department of Energy (DOE) serves as the lead Federal agency with respect to atmospheric carbon dioxide (CO{sub 2}) and the greenhouse effect.'' Within DOE, the Carbon Dioxide Research Division (CDRD) has been responsible for leading the research effort investigating atmospheric CO{sub 2}, global warming, and other aspects of the greenhouse effect. Critical to CDRD's endeavors is accurate, effective communication of research findings -- not only to scientists, but to policymakers and the general public as well. The past three-and-a-half years, Walcoff Associates, Inc., (Walcoff) has supported CDRD in meeting this technology transfer challenge. Walcoff has drawn upon a wide range of technical and professional skills to support the CDRD in its technology transfer services. Underlying all tasks has been the need to communicate highly complex, information across scientific, political and economic disciplines. During the three and a half year contract period, Walcoff has successfully provided support to the CDRD to enhance its technology transfer resources and accomplishments. 5 figs., 1 tab.

1990-01-13T23:59:59.000Z

78

Hybrid Vehicle Turbine Engine Technology Support (HVTE-TS) ceramic design manual  

SciTech Connect

This ceramic component design manual was an element of the Advanced Turbine Technology Applications Project (ATTAP). The ATTAP was intended to advance the technological readiness of the ceramic automotive gas turbine engine as a primary power plant. Of the several technologies requiring development before such an engine could become a commercial reality, structural ceramic components represented the greatest technical challenge, and was the prime focus of the program. HVTE-TS, which was created to support the Hybrid Electric Vehicle (HEV) program, continued the efforts begun in ATTAP to develop ceramic components for an automotive gas turbine engine. In HVTE-TS, the program focus was extended to make this technology applicable to the automotive gas turbine engines that form the basis of hybrid automotive propulsion systems consisting of combined batteries, electric drives, and on-board power generators as well as a primary power source. The purpose of the ceramic design manual is to document the process by which ceramic components are designed, analyzed, fabricated, assembled, and tested in a gas turbine engine. Interaction with ceramic component vendors is also emphasized. The main elements of the ceramic design manual are: an overview of design methodology; design process for the AGT-5 ceramic gasifier turbine rotor; and references. Some reference also is made to the design of turbine static structure components to show methods of attaching static hot section ceramic components to supporting metallic structures.

1997-10-01T23:59:59.000Z

79

Instrumentation, Controls, and Human-Machine Interface Technology Development Roadmap in Support of Grid Appropriate Reactors  

Science Conference Proceedings (OSTI)

Grid Appropriate Reactors (GARs) are a component of the U.S. Department of Energy s (DOE s) Global Nuclear Energy Partnership (GNEP) program. GARs have smaller output power (Instrumentation, Controls, and Human-Machine Interface (ICHMI) technology development roadmap emphasizing the specific characteristics of GARs [1]. This roadmapping effort builds upon and focuses the recently developed, more general nuclear energy ICHMI technology development roadmap [2]. The combination of the smaller plant size, smaller grids, and deployment in locations without extensive prior nuclear power experience presents particular infrastructure, regulation, design, operational, and safeguards challenges for effective GAR deployment. ICHMI technologies are central to efficient GAR operation and as such are a dimension of each of these challenges. Further, while the particular ICHMI technologies to be developed would be useful at larger power plants, they are not high-priority development items at the larger plants. For example, grid transient resilience would be a useful feature for any reactor/grid combination and indeed would have limited some recent blackout events. However, most large reactors have limited passive cooling features. Large plants with active safety response features will likely preserve trip preferential grid transient response. This contrasts sharply with GARs featuring passive shutdown cooling, which can safely support grid stability during large grid transients. ICHMI technologies ranging from alternative control algorithms to simplified human-interface system designs are key to enabling GARs to respond properly and thereby stabilize the grid during transients.

Holcomb, David Eugene [ORNL; Upadhyaya, Belle R. [University of Tennessee, Knoxville (UTK); Kisner, Roger A [ORNL; O'Hara, John [Brookhaven National Laboratory (BNL); Quinn, Edward L. [Longenecker & Associates; Miller, Don W. [Ohio State University

2009-01-01T23:59:59.000Z

80

Fostering a Renewable Energy Technology Industry: An InternationalComparison of Wind Industry Policy Support Mechanisms  

SciTech Connect

This article examines the importance of national and sub-national policies in supporting the development of successful global wind turbine manufacturing companies. We explore the motivations behind establishing a local wind power industry, and the paths that different countries have taken to develop indigenous large wind turbine manufacturing industries within their borders. This is done through a cross-country comparison of the policy support mechanisms that have been employed to directly and indirectly promote wind technology manufacturing in twelve countries. We find that in many instances there is a clear relationship between a manufacturer's success in its home country market and its eventual success in the global wind power market. Whether new wind turbine manufacturing entrants are able to succeed will likely depend in part on the utilization of their turbines in their own domestic market, which in turn will be influenced by the annual size and stability of that market. Consequently, policies that support a sizable, stable market for wind power, in conjunction with policies that specifically provide incentives for wind power technology to be manufactured locally, are most likely to result in the establishment of an internationally competitive wind industry.

Lewis, Joanna; Wiser, Ryan

2005-11-15T23:59:59.000Z

Note: This page contains sample records for the topic "fixed support technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Fostering a Renewable Energy Technology Industry: An InternationalComparison of Wind Industry Policy Support Mechanisms  

SciTech Connect

This article examines the importance of national and sub-national policies in supporting the development of successful global wind turbine manufacturing companies. We explore the motivations behind establishing a local wind power industry, and the paths that different countries have taken to develop indigenous large wind turbine manufacturing industries within their borders. This is done through a cross-country comparison of the policy support mechanisms that have been employed to directly and indirectly promote wind technology manufacturing in twelve countries. We find that in many instances there is a clear relationship between a manufacturer's success in its home country market and its eventual success in the global wind power market. Whether new wind turbine manufacturing entrants are able to succeed will likely depend in part on the utilization of their turbines in their own domestic market, which in turn will be influenced by the annual size and stability of that market. Consequently, policies that support a sizable, stable market for wind power, in conjunction with policies that specifically provide incentives for wind power technology to be manufactured locally, are most likely to result in the establishment of an internationally competitive wind industry.

Lewis, Joanna; Wiser, Ryan

2005-11-15T23:59:59.000Z

82

Contracts for field projects and supporting research on enhanced oil recovery and improved drilling technology. Progress review No. 28  

SciTech Connect

Highlights of progress during the quarter ending September 30, 1981 are summarized. Field projects and supporting research in the following areas are reported: chemical flooding; carbon dioxide injection; thermal processes/heavy oil (steam and in-situ combustion); resource assessment technology; extraction technology; environmental; petroleum technology; microbial enhanced oil recovery; and improved drilling technology. A list of BETC publications with abstracts, published during the quarter is included. (DMC)

Linville, B.

1982-01-01T23:59:59.000Z

83

Fostering a Renewable Energy Technology Industry: An International Comparison of Wind Industry Policy Support Mechanisms  

E-Print Network (OSTI)

and Renewable Energy Technology. Proceedings of the 2003Technological Issues in Technology Transfer, Special Reportof Renewable Energy Technologies: Wind Power in the United

Lewis, Joanna; Wiser, Ryan

2005-01-01T23:59:59.000Z

84

Electric Ground Support Equipment Advanced Battery Technology Demonstration Project at the Ontario Airport  

SciTech Connect

The intent of the electric Ground Support Equipment (eGSE) demonstration is to evaluate the day-to-day vehicle performance of electric baggage tractors using two advanced battery technologies to demonstrate possible replacements for the flooded lead-acid (FLA) batteries utilized throughout the industry. These advanced battery technologies have the potential to resolve barriers to the widespread adoption of eGSE deployment. Validation testing had not previously been performed within fleet operations to determine if the performance of current advanced batteries is sufficient to withstand the duty cycle of electric baggage tractors. This report summarizes the work performed and data accumulated during this demonstration in an effort to validate the capabilities of advanced battery technologies. This report summarizes the work performed and data accumulated during this demonstration in an effort to validate the capabilities of advanced battery technologies. The demonstration project also grew the relationship with Southwest Airlines (SWA), our demonstration partner at Ontario International Airport (ONT), located in Ontario, California. The results of this study have encouraged a proposal for a future demonstration project with SWA.

Tyler Gray; Jeremy Diez; Jeffrey Wishart; James Francfort

2013-07-01T23:59:59.000Z

85

Bidding Strategy with Forecast Technology Based on Support Vector Machine in Electrcity Market  

E-Print Network (OSTI)

The participants of the electricity market concern very much the market price evolution. Various technologies have been developed for price forecast. SVM (Support Vector Machine) has shown its good performance in market price forecast. Two approaches for forming the market bidding strategies based on SVM are proposed. One is based on the price forecast accuracy, with which the being rejected risk is defined. The other takes into account the impact of the producer's own bid. The risks associated with the bidding are controlled by the parameters setting. The proposed approaches have been tested on a numerical example.

Gao, C; Napoli, R; Wan, Q

2007-01-01T23:59:59.000Z

86

LITERATURE REVIEWS TO SUPPORT ION EXCHANGE TECHNOLOGY SELECTION FOR MODULAR SALT PROCESSING  

Science Conference Proceedings (OSTI)

This report summarizes the results of literature reviews conducted to support the selection of a cesium removal technology for application in a small column ion exchange (SCIX) unit supported within a high level waste tank. SCIX is being considered as a technology for the treatment of radioactive salt solutions in order to accelerate closure of waste tanks at the Savannah River Site (SRS) as part of the Modular Salt Processing (MSP) technology development program. Two ion exchange materials, spherical Resorcinol-Formaldehyde (RF) and engineered Crystalline Silicotitanate (CST), are being considered for use within the SCIX unit. Both ion exchange materials have been studied extensively and are known to have high affinities for cesium ions in caustic tank waste supernates. RF is an elutable organic resin and CST is a non-elutable inorganic material. Waste treatment processes developed for the two technologies will differ with regard to solutions processed, secondary waste streams generated, optimum column size, and waste throughput. Pertinent references, anticipated processing sequences for utilization in waste treatment, gaps in the available data, and technical comparisons will be provided for the two ion exchange materials to assist in technology selection for SCIX. The engineered, granular form of CST (UOP IE-911) was the baseline ion exchange material used for the initial development and design of the SRS SCIX process (McCabe, 2005). To date, in-tank SCIX has not been implemented for treatment of radioactive waste solutions at SRS. Since initial development and consideration of SCIX for SRS waste treatment an alternative technology has been developed as part of the River Protection Project Waste Treatment Plant (RPP-WTP) Research and Technology program (Thorson, 2006). Spherical RF resin is the baseline media for cesium removal in the RPP-WTP, which was designed for the treatment of radioactive waste supernates and is currently under construction in Hanford, WA. Application of RF for cesium removal in the Hanford WTP does not involve in-riser columns but does utilize the resin in large scale column configurations in a waste treatment facility. The basic conceptual design for SCIX involves the dissolution of saltcake in SRS Tanks 1-3 to give approximately 6 M sodium solutions and the treatment of these solutions for cesium removal using one or two columns supported within a high level waste tank. Prior to ion exchange treatment, the solutions will be filtered for removal of entrained solids. In addition to Tanks 1-3, solutions in two other tanks (37 and 41) will require treatment for cesium removal in the SCIX unit. The previous SCIX design (McCabe, 2005) utilized CST for cesium removal with downflow supernate processing and included a CST grinder following cesium loading. Grinding of CST was necessary to make the cesium-loaded material suitable for vitrification in the SRS Defense Waste Processing Facility (DWPF). Because RF resin is elutable (and reusable) and processing requires conversion between sodium and hydrogen forms using caustic and acidic solutions more liquid processing steps are involved. The WTP baseline process involves a series of caustic and acidic solutions (downflow processing) with water washes between pH transitions across neutral. In addition, due to resin swelling during conversion from hydrogen to sodium form an upflow caustic regeneration step is required. Presumably, one of these basic processes (or some variation) will be utilized for MSP for the appropriate ion exchange technology selected. CST processing involves two primary waste products: loaded CST and decontaminated salt solution (DSS). RF processing involves three primary waste products: spent RF resin, DSS, and acidic cesium eluate, although the resin is reusable and typically does not require replacement until completion of multiple treatment cycles. CST processing requires grinding of the ion exchange media, handling of solids with high cesium loading, and handling of liquid wash and conditioning solutions. RF processing requires h

King, W

2007-11-30T23:59:59.000Z

87

Instrumentation, Controls, and Human-Machine Interface Technology Development Roadmap in Support of Grid Appropriate Reactors  

SciTech Connect

Grid Appropriate Reactors (GARs) are a component of the U.S. Department of Energy s (DOE s) Global Nuclear Energy Partnership (GNEP) program. GARs have smaller output power (<~600 MWe), than those intended for deployment on large, tightly coupled grids. This smaller size is important in avoiding grid destabilization, which can result from having a large fraction of a grid s electrical generation supplied by a single source. GARs are envisioned to be deployed worldwide often in locations without extensive nuclear power experience. DOE recently sponsored the creation of an Instrumentation, Controls, and Human-Machine Interface (ICHMI) technology development roadmap emphasizing the specific characteristics of GARs [1]. This roadmapping effort builds upon and focuses the recently developed, more general nuclear energy ICHMI technology development roadmap [2]. The combination of the smaller plant size, smaller grids, and deployment in locations without extensive prior nuclear power experience presents particular infrastructure, regulation, design, operational, and safeguards challenges for effective GAR deployment. ICHMI technologies are central to efficient GAR operation and as such are a dimension of each of these challenges. Further, while the particular ICHMI technologies to be developed would be useful at larger power plants, they are not high-priority development items at the larger plants. For example, grid transient resilience would be a useful feature for any reactor/grid combination and indeed would have limited some recent blackout events. However, most large reactors have limited passive cooling features. Large plants with active safety response features will likely preserve trip preferential grid transient response. This contrasts sharply with GARs featuring passive shutdown cooling, which can safely support grid stability during large grid transients. ICHMI technologies ranging from alternative control algorithms to simplified human-interface system designs are key to enabling GARs to respond properly and thereby stabilize the grid during transients.

Holcomb, David Eugene [ORNL; Upadhyaya, Belle R. [University of Tennessee, Knoxville (UTK); Kisner, Roger A [ORNL; O'Hara, John [Brookhaven National Laboratory (BNL); Quinn, Edward L. [Longenecker & Associates; Miller, Don W. [Ohio State University

2009-01-01T23:59:59.000Z

88

Contracts for field projects and supporting research on enhanced oil recovery and improved drilling technology. Progress review No. 37, quarter ending December 31, 1983  

SciTech Connect

Project reports are presented for field projects and supporting research for the following: chemical flooding; carbon dioxide injection; thermal methods; resource assessment technology; extraction technology; environmental and safety; microbial enhanced oil recovery; and general supporting research.

Linville, B. (ed.)

1984-08-01T23:59:59.000Z

89

Key Residential Building Equipment Technologies for Control and Grid Support PART I (Residential)  

Science Conference Proceedings (OSTI)

Electrical energy consumption of the residential sector is a crucial area of research that has in the past primarily focused on increasing the efficiency of household devices such as water heaters, dishwashers, air conditioners, and clothes washer and dryer units. However, the focus of this research is shifting as objectives such as developing the smart grid and ensuring that the power system remains reliable come to the fore, along with the increasing need to reduce energy use and costs. Load research has started to focus on mechanisms to support the power system through demand reduction and/or reliability services. The power system relies on matching generation and load, and day-ahead and real-time energy markets capture most of this need. However, a separate set of grid services exist to address the discrepancies in load and generation arising from contingencies and operational mismatches, and to ensure that the transmission system is available for delivery of power from generation to load. Currently, these grid services are mostly provided by generation resources. The addition of renewable resources with their inherent variability can complicate the issue of power system reliability and lead to the increased need for grid services. Using load as a resource, through demand response programs, can fill the additional need for flexible resources and even reduce costly energy peaks. Loads have been shown to have response that is equal to or better than generation in some cases. Furthermore, price-incentivized demand response programs have been shown to reduce the peak energy requirements, thereby affecting the wholesale market efficiency and overall energy prices. The residential sector is not only the largest consumer of electrical energy in the United States, but also has the highest potential to provide demand reduction and power system support, as technological advancements in load control, sensor technologies, and communication are made. The prevailing loads based on the largest electrical energy consumers in the residential sector are space heating and cooling, washer and dryer, water heating, lighting, computers and electronics, dishwasher and range, and refrigeration. As the largest loads, these loads provide the highest potential for delivering demand response and reliability services. Many residential loads have inherent flexibility that is related to the purpose of the load. Depending on the load type, electric power consumption levels can either be ramped, changed in a step-change fashion, or completely removed. Loads with only on-off capability (such as clothes washers and dryers) provide less flexibility than resources that can be ramped or step-changed. Add-on devices may be able to provide extra demand response capabilities. Still, operating residential loads effectively requires awareness of the delicate balance of occupants health and comfort and electrical energy consumption. This report is Phase I of a series of reports aimed at identifying gaps in automated home energy management systems for incorporation of building appliances, vehicles, and renewable adoption into a smart grid, specifically with the intent of examining demand response and load factor control for power system support. The objective is to capture existing gaps in load control, energy management systems, and sensor technology with consideration of PHEV and renewable technologies to establish areas of research for the Department of Energy. In this report, (1) data is collected and examined from state of the art homes to characterize the primary residential loads as well as PHEVs and photovoltaic for potential adoption into energy management control strategies; and (2) demand response rules and requirements across the various demand response programs are examined for potential participation of residential loads. This report will be followed by a Phase II report aimed at identifying the current state of technology of energy management systems, sensors, and communication technologies for demand response and load factor control applications

Starke, Michael R [ORNL; Onar, Omer C [ORNL; DeVault, Robert C [ORNL

2011-09-01T23:59:59.000Z

90

Technology gap analysis on sodium-cooled reactor fuel handling system supporting advanced burner reactor development.  

Science Conference Proceedings (OSTI)

The goals of the Global Nuclear Energy Partnership (GNEP) are to expand the use of nuclear energy to meet increasing global energy demand in an environmentally sustainable manner, to address nuclear waste management issues without making separated plutonium, and to address nonproliferation concerns. The advanced burner reactor (ABR) is a fast reactor concept which supports the GNEP fuel cycle system. Since the integral fast reactor (IFR) and advanced liquid-metal reactor (ALMR) projects were terminated in 1994, there has been no major development on sodium-cooled fast reactors in the United States. Therefore, in support of the GNEP fast reactor program, the history of sodium-cooled reactor development was reviewed to support the initiation of this technology within the United States and to gain an understanding of the technology gaps that may still remain for sodium fast reactor technology. The fuel-handling system is a key element of any fast reactor design. The major functions of this system are to receive, test, store, and then load fresh fuel into the core; unload from the core; then clean, test, store, and ship spent fuel. Major requirements are that the system must be reliable and relatively easy to maintain. In addition, the system should be designed so that it does not adversely impact plant economics from the viewpoints of capital investment or plant operations. In this gap analysis, information on fuel-handling operating experiences in the following reactor plants was carefully reviewed: EBR-I, SRE, HNPF, Fermi, SEFOR, FFTF, CRBR, EBR-II, DFR, PFR, Rapsodie, Phenix, Superphenix, KNK, SNR-300, Joyo, and Monju. The results of this evaluation indicate that a standardized fuel-handling system for a commercial fast reactor is yet to be established. However, in the past sodium-cooled reactor plants, most major fuel-handling components-such as the rotatable plug, in-vessel fuel-handling machine, ex-vessel fuel transportation cask, ex-vessel sodium-cooled storage, and cleaning stations-have accumulated satisfactory construction and operation experiences. In addition, two special issues for future development are described in this report: large capacity interim storage and transuranic-bearing fuel handling.

Chikazawa, Y.; Farmer, M.; Grandy, C.; Nuclear Engineering Division

2009-03-01T23:59:59.000Z

91

Contracts for field projects and supporting research on enhanced oil recovery and improved drilling technology. Progress review No. 21, quarter ending December 31, 1979  

Science Conference Proceedings (OSTI)

Individual report are presented of contracts for field projects and supporting research on chemical flooding, CO/sub 2/ injection, thermal/heavy oil, resource assessment technology, improved drilling technology, residual oil, environment, and petroleum technology. (DLC)

Linville, B. (ed.)

1980-04-01T23:59:59.000Z

92

Technology development for cobalt F-T catalysts. Topical report No.3, Zirconia promotion of Fischer-Tropsch cobalt catalysts: Behavior in fixed-bed and slurry bubble column reactors  

DOE Green Energy (OSTI)

A series of cobalt-based F-T catalysts supported on alumina and silica were prepared with different loadings of Zr and different sequences of impregnation of Co and Zr. All catalysts were extensively characterized by different methods. The catalysts were evaluated in terms of their activity and selectivity both in fixed bed and slurry bubble column reactors. Addition of ZrO{sub 2} to both Co/SiO{sub 2} and Co/Al{sub 2}O{sub 3} catalysts resulted in at least a twofold increase in the catalyst activity for F-T synthesis in the fixed bed reactor. In the slurry bubble column reactor, a similar promotion effect was observed for the SiO{sub 2}-supported catalysts, while the addition of Zr to a cobalt/alumina catalyst had a less significant effect.

Oukaci, R.; Marcelin, G.; Goodwin, J.G. Jr. [Pittsburgh Univ., PA (United States). Dept. of Chemical and Petroleum Engineering

1995-01-17T23:59:59.000Z

93

Contracts for field projects and supporting research on enhanced oil recovery and improved drilling technology. Progress Review No. 31, quarter ending June 30, 1982  

Science Conference Proceedings (OSTI)

Progress reports are presented of contracts for field projects and supporting research on chemical flooding, carbon dioxide injection, thermal/heavy oil, resource assessment technology, extraction technology, environmental, petroleum technology, microbial enhanced oil recovery, oil recovery by gravity mining, improved drilling technology, and general supporting research.

Linville, B. (ed.)

1982-10-01T23:59:59.000Z

94

Progress review No. 24: contracts for field projects and supporting research on enhanced oil recovery and improved drilling technology. Progress report, quarter ending September 30, 1980  

Science Conference Proceedings (OSTI)

Reports are presented of contracts for field projects and supporting research on chemical flooding, carbon dioxide injection and thermal/heavy oil, as well as for the following areas of research: extraction technology; resource assessment technology; environmental; petroleum technology; microbial enhanced oil recovery; improved drilling technology; and general supporting research.

Linville, B. (ed.)

1981-02-01T23:59:59.000Z

95

Contracts for field projects and supporting research on enhanced oil recovery and improved drilling technology. Progress review No. 29, quarter ending December 31, 1981  

SciTech Connect

Highlights of progress accomplished during the quarter ending December, 1981, are summarized in this report. Discussion is presented under the following headings: chemical flooding - field projects; chemical flooding - supporting research; carbon dioxide injection - field projects; carbon dioxide injection - supporting research; thermal/heavy oil - field projects and supporting research; resource assessment technology; extraction technology; environmental aspects; petroleum processing technology; microbial enhanced oil recovery; and improved drilling technology. (DMC)

Linville, B. (ed.)

1982-05-01T23:59:59.000Z

96

International technology catalogue: Foreign technologies to support the environmental restoration and waste management needs of the DOE complex  

SciTech Connect

This document represents a summary of 27 foreign-based environmental restoration and waste management technologies that have been screened and technically evaluated for application to the cleanup problems of the Department of Energy (DOE) nuclear weapons complex. The evaluation of these technologies was initiated in 1992 and completed in 1995 under the DOE`s International Technology Coordination Program of the Office of Technology Development. A methodology was developed for conducting a country-by-country survey of several regions of the world where specific environmental technology capabilities and market potential were investigated. The countries that were selected from a rank-ordering process for the survey included: then West Germany, the Netherlands, France, Japan, Taiwan, the Czech and Slovak Republics, and the Former Soviet Union. The notably innovative foreign technologies included in this document were screened initially from a list of several hundred, and then evaluated based on criteria that examined for level of maturity, suitability to the DOE needs, and for potential cost effective application at a DOE site. Each of the selected foreign technologies that were evaluated in this effort for DOE application were subsequently matched with site-specific environmental problem units across the DOE complex using the Technology Needs Assessment CROSSWALK Report. For ease of tracking these technologies to site problem units, and to facilitate their input into the DOE EnviroTRADE Information System, they were categorized into the following three areas: (1) characterization, monitoring and sensors, (2) waste treatment and separations, and (3) waste containment. Technical data profiles regarding these technologies include title and description, performance information, development status, key regulatory considerations, intellectual property rights, institute and contact personnel, and references.

Matalucci, R.V. [ed.] [Sandia National Labs., Albuquerque, NM (United States). International Programs Dept.; Jimenez, R.D.; Esparza-Baca, C. [ed.] [Applied Sciences Lab., Inc., Albuquerque, NM (United States)

1995-07-01T23:59:59.000Z

97

The Development of Material and Fabrication Technologies for ITER Magnet Supports  

Science Conference Proceedings (OSTI)

Technical Paper / First Joint ITER-IAEA Technical Meeting on Analysis of ITER Materials and Technologies

P. Y. Li; C. J. Pan; B. L. Hou; S. L. Han; Z. C. Sun; F. Savary; Y. K. Fu; R. Gallix; N. Mitchell

98

Contracts for field projects and supporting research on enhanced oil recovery and improved drilling technology. Progress review No. 33, quarter ending December 31, 1982  

SciTech Connect

Progress reports are presented of contracts for field projects and supporting research on chemical flooding, carbon dioxide injection, thermal/heavy oil, resource assessment technology, extraction technology, environmental and safety, microbial enhanced oil recovery, oil recovery by gravity mining, improved drilling technology, and general supporting research.

Linville, B. (ed.)

1983-04-01T23:59:59.000Z

99

Contracts for field projects and supporting research on enhanced oil recovery and improved drilling technology. Progress review No. 27, for quarter ending June 30, 1981  

Science Conference Proceedings (OSTI)

Reports are presented of contracts for field projects and supporting research on chemical flooding, carbon dioxide injection, thermal/heavy oil, as well as for the following areas of research: resource assessment technology; extraction technology; environmental; microbial enhanced oil recovery; improved drilling technology; and general supporting research.

Linville, B. (ed.)

1981-09-01T23:59:59.000Z

100

Contracts for field projects and supporting research on enhanced oil recovery and improved drilling technology. Progress review No. 32, quarter ending September 30, 1982  

SciTech Connect

Progress reports are presented of contracts for field projects and supporting research on chemical flooding, carbon dioxide injection, thermal/heavy oil, resource assessment technology, extraction technology, environmental and safety, microbial enhanced oil recovery, oil recovery by gravity mining, improved drilling technology, and general supporting research.

Linville, B. (ed.)

1983-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "fixed support technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Contracts for field projects and supporting research on enhanced oil recovery and improved drilling technology. Progress review No. 34, quarter ending March 31, 1983  

SciTech Connect

Progress achieved for the quarter ending March 1983 are presented for field projects and supporting research for the following: chemical flooding; carbon dioxide injection; and thermal/heavy oil. In addition, progress reports are presented for: resource assessment technology; extraction technology; environmental and safety; microbial enhanced oil recovery; oil recovered by gravity mining; improved drilling technology; and general supporting research. (ATT)

Linville, B. (ed.)

1983-07-01T23:59:59.000Z

102

Contracts for field projects and supporting research on enhanced oil recovery and improved drilling technology. Progress review No. 30, quarter ending March 31, 1982  

SciTech Connect

Reports are presented of contracts for field projects and supporting research on chemical flooding, carbon dioxide injection, thermal/heavy oil, as well as for the following areas of research: resource assessment technology; extraction technology; microbial enhanced oil recovery; improved drilling technology, and general supporting research.

Linville, B. (ed.)

1982-07-01T23:59:59.000Z

103

Contracts for field projects and supporting research on enhanced oil recovery and improved drilling technology. Progress review No. 35, quarter ending June 30, 1983  

Science Conference Proceedings (OSTI)

Progress reports are presented for field projects and supporting research for the following: chemical flooding; carbon dioxide injection; thermal/heavy oil; resource assessment technology; extraction technology; environmental and safety; microbial enhanced oil recovery; improved drilling technology; and general supporting research.

Linville, B. (ed.)

1983-10-01T23:59:59.000Z

104

Progress review No. 25: contracts for field projects and supporting research on enhanced oil recovery and improved drilling technology. Progress report, quarter ending December 31, 1980  

Science Conference Proceedings (OSTI)

Reports are presented of contracts for field projects and supporting research on chemical flooding, carbon dioxide injection, thermal/heavy oil, as well as for the following areas of research: resource assessment technology; extraction technology; environmental; microbial enhanced oil recovery; improving drilling technology; and general supporting research.

Linville, B. (ed.)

1981-05-01T23:59:59.000Z

105

Contracts for field projects and supporting research on enhanced oil recovery and improved drilling technology. Progress review No. 36 for quarter ending September 30, 1983  

SciTech Connect

Progress reports for the quarter ending September 30, 1983, are presented for field projects and supported research for the following: chemical flooding; carbon dioxide injection; thermal/heavy oil; resource assessment technology; extraction technology; environmental and safety; microbial enhanced oil recovery; oil recovery by gravity mining; improved drilling technology; and general supporting research.

Linville, B. (ed.)

1984-03-01T23:59:59.000Z

106

Countdown to Fixed Target INSIDE  

NLE Websites -- All DOE Office Websites (Extended Search)

17, 1996 17, 1996 Number 10 Countdown to Fixed Target INSIDE 2 University Close-Up: The University of Illinois 4 Tollestrup Elected to National Academy 5 Bardeen Receives Sakurai Prize 6 Take Your Daughters and Sons to Work Day "At this moment," Fermilab Director John Peoples told the House Subcommittee on Energy and Environment in testimony deliv- ered in Washington on May 8, "Fermilab is in the midst of the transition from collider opera- tions to fixed-target operations. In June, we will begin extracting a beam of protons from the Tevatron, the highest-energy external beam in the world. By directing this beam onto eight targets we will create eight distinct particle beams that will in turn support 10 unique experiments. Although fixed-target experi- ments cannot explore the high-energy frontier

107

Research turbine supports sustained technology development. For more than three decades, engineers at the National Renewable Energy Labora-  

E-Print Network (OSTI)

Research turbine supports sustained technology development. For more than three decades, engineers, improve wind turbine performance, and reduce the cost of energy. Although there have been dramatic turbine test platform. Working with DOE, NREL purchased and installed a GE 1.5-MW wind turbine at the NWTC

108

Biomass Support for the China Renewable Energy Law: International Biomass Energy Technology Review Report, January 2006  

DOE Green Energy (OSTI)

Subcontractor report giving an overview of the biomass power generation technologies used in China, the U.S., and Europe.

Not Available

2006-10-01T23:59:59.000Z

109

Government support for the commercialization of new energy technologies : an analysis and exploration of the issues  

E-Print Network (OSTI)

This report examines the issues associated with government programs proposed for the "commercialization" of new energy technologies; these programs

Policy Study Group, MIT Energy Lab

1976-01-01T23:59:59.000Z

110

Visualization to Support Human Decision-Making and Other Activities: Technology Demonstrations and Applications  

Science Conference Proceedings (OSTI)

This report presents results of a research project demonstrating visualization technology and identifying potential applications for the technology in todays nuclear power generating facilities. The demonstrations provide examples of how visualization technology can enhance the quality of human performance and other activities, resulting in improved nuclear utility operations and performance. The demonstrations also provide an understanding of the capabilities and limitations of visualization technology.

2005-11-29T23:59:59.000Z

111

Contracts for field projects and supporting research on enhanced oil recovery and improved drilling technology. Progress review No. 26, quarter ending March 31, 1981  

SciTech Connect

Objectives and technical progress are summarized for field projects and supporting research in chemical flooding, CO/sub 2/ injection, thermal/heavy oil recovery, resource assessment, extraction technology, microbial enhanced oil recovery, and improved drilling technology. (DLC)

Linville, B. (ed.)

1981-07-01T23:59:59.000Z

112

TECHNOLOGY TYPE: ENVIRONMENTAL DECISION SUPPORT SOFTWARE APPLICATION: VISUALIZATION, SAMPLE OPTIMIZATION, AND COST- BENEFIT ANALYSIS OF ENVIRONMENTAL DATA SETS  

E-Print Network (OSTI)

Program (ETV) to facilitate the deployment of innovative or improved environmental technologies through performance verification and dissemination of information. The goal of the ETV Program is to further environmental protection by substantially accelerating the acceptance and use of improved and cost-effective technologies. ETV seeks to achieve this goal by providing high-quality, peer-reviewed data on technology performance to those involved in the design, distribution, financing, permitting, purchase, and use of environmental technologies. ETV works in partnership with recognized standards and testing organizations and stakeholder groups consisting of regulators, buyers, and vendor organizations, with the full participation of individual technology developers. The program evaluates the performance of innovative technologies by developing test plans that are responsive to the needs of stakeholders, conducting field or laboratory tests (as appropriate), collecting and analyzing data, and preparing peer-reviewed reports. All evaluations are conducted in accordance with rigorous quality assurance protocols to ensure that data of known and adequate quality are generated and that the results are defensible. The Site Characterization and Monitoring Technologies Pilot (SCMT), one of 12 technology areas under ETV, is administered by EPAs National Exposure Research Laboratory (NERL). With the support of the U.S.

unknown authors

2000-01-01T23:59:59.000Z

113

Wireless Networking to Support Data and Voice Communication Using Spread Spectrum Technology in The Physical Layer  

E-Print Network (OSTI)

Wireless networking is rapidly growing and becomes an inexpensive technology which allows multiple users to simultaneously access the network and the internet while roaming about the campus. In the present work, the software development of a wireless LAN(WLAN) is highlighted. This WLAN utilizes direct sequence spread spectrum (DSSS) technology at 902MHz RF carrier frequency in its physical layer. Cost effective installation and antijaming property of spread spectrum technology are the major advantages of this work.

Dhar, Sourav

2007-01-01T23:59:59.000Z

114

Decision support method to apply Additive Manufacturing Technologies for plastic components in the aircraft industry.  

E-Print Network (OSTI)

??Additive Manufacturing Technologies (AMT) are a collection of manufacturing processes driven by CAD data to produce physical models and parts by means of additive techniques. (more)

Anderson Vicente Borille

2009-01-01T23:59:59.000Z

115

Fostering a Renewable Energy Technology Industry: An International Comparison of Wind Industry Policy Support Mechanisms  

E-Print Network (OSTI)

Competitiveness in the Renewable Energy Sector: The Case ofand Regulation Concerning Renewable Energy ElectricityIndustrial Policy and Renewable Energy Technology.

Lewis, Joanna; Wiser, Ryan

2005-01-01T23:59:59.000Z

116

Technology-supported cross cultural collaborative learning in the developing world  

Science Conference Proceedings (OSTI)

Technology (especially the Internet) has been touted as an important tool for cross-cultural exchange. In this paper we report on some of the challenges and successes of using a cross-cultural collaborative learning intervention design in rural Himalayan ... Keywords: developing nations, educational technology design, environment education, participatory design

Christopher Hoadley; Sameer Honwad; Kenneth Tamminga

2010-08-01T23:59:59.000Z

117

Solar Technology and Policy Analysis to Support the Systems-Driven Approach  

SciTech Connect

The primary focus of the Systems-Driven Approach (SDA) analysis team is to improve the analytical basis for understanding the system and policy drivers of solar technologies in various markets. Analysis activities during the past year have focused in three inter-related areas: (1) developing long-term market penetration projections for the full set of technologies funded within the Solar Energy Technologies Program, (2) reviewing the Program's out-year cost and performance targets for photovoltaic (PV) technology, and (3) evaluating policies, as well as other factors, that impact the value of solar energy technologies in various markets. This paper will summarize the results of these activities and describe how they relate to the overall SDA effort.

Margolis, R. M.

2005-01-01T23:59:59.000Z

118

Solar Technology and Policy Analysis to Support the Systems-Driven Approach  

DOE Green Energy (OSTI)

The primary focus of the Systems-Driven Approach (SDA) analysis team is to improve the analytical basis for understanding the system and policy drivers of solar technologies in various markets. Analysis activities during the past year have focused in three inter-related areas: (1) developing long-term market penetration projections for the full set of technologies funded within the Solar Energy Technologies Program, (2) reviewing the Program's out-year cost and performance targets for photovoltaic (PV) technology, and (3) evaluating policies, as well as other factors, that impact the value of solar energy technologies in various markets. This paper will summarize the results of these activities and describe how they relate to the overall SDA effort.

Margolis, R. M.

2005-01-01T23:59:59.000Z

119

Constructing marketing decision support systems using data diffusion technology: A case study of gas station diversification  

Science Conference Proceedings (OSTI)

Building a decision support system (DSS) using small data sets usually results in uncertain knowledge, likely leading to incorrect decisions and causing a large losses. However, gathering sufficient samples for building a DSS often has significant costs ... Keywords: Back-propagation network, Bayesian network, Decision support system, Diversification, Small data set

Der-Chiang Li; Yao-San Lin; Yu-Cheng Huang

2009-03-01T23:59:59.000Z

120

EVALUATION OF BEST AVAILABLE CONTROL TECHNOLOGY FOR TOXICS -TBACT- DOUBLE SHELL TANK FARMS PRIMARY VENTILATION SYSTEMS SUPPORTING WASTE TRANSFER OPERATIONS  

Science Conference Proceedings (OSTI)

This report is an evaluation of Best Available Control Technology for Toxics (tBACT) for installation and operation of the Hanford double shell (DST) tank primary ventilation systems. The DST primary ventilation systems are being modified to support Hanford's waste retrieval, mixing, and delivery of single shell tank (SST) and DST waste through the DST storage system to the Waste Treatment and Immobilizaiton Plant (WTP).

HAAS CC; KOVACH JL; KELLY SE; TURNER DA

2010-06-24T23:59:59.000Z

Note: This page contains sample records for the topic "fixed support technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

EVALUATION OF BEST AVAILABLE CONTROL TECHNOLOGY FOR TOXICS (TBACT) DOUBLE SHELL TANK FARMS PRIMARY VENTILATION SYSTEM SUPPORTING WASTE TRANSFER OPERATIONS  

Science Conference Proceedings (OSTI)

This report is an evaluation of Best Available Control Technology for Toxics (tBACT) for installation and operation of the Hanford double shell (DST) tank primary ventilation systems. The DST primary ventilation systems are being modified to support Hanford's waste retrieval, mixing, and delivery of single shell tank (SST) and DST waste throught the DST storage system to the Waste Treatment and Immobilization Plant (WTP).

KELLY SE; HAASS CC; KOVACH JL; TURNER DA

2010-06-03T23:59:59.000Z

122

Technical Specification for a Transportable Lithium-Ion Energy Storage System for Grid Support Using Commercially Available Lithium- Ion Technology  

Science Conference Proceedings (OSTI)

The impressive global scale of lithium-ion battery production and investment in R&D is driving cost reduction and performance improvements that could make lithium-ion technology desirable for certain grid-scale storage applications in the near term. Although many stationary grid market applications can be configured using lithium-ion batteries, Electric Power Research Institute (EPRI) research identified a 1-MW, 2-hour containerized substation grid support storage system as a key electric utility product...

2012-07-31T23:59:59.000Z

123

Internet Technology and Social Support: Are They Beneficial for Overweight Older Adolescents?  

E-Print Network (OSTI)

In recent years, literature in the area of web-based interventions for health-related concerns has burgeoned due to the increasing popularity and accessibility of the World Wide Web. Researchers have investigated the success of web-based programs to facilitate improved health behaviors, weight loss, and social support. However, due to the relatively recent application of web-based health-behavior programs, little research has studied whether these interventions are effective with overweight older adolescents. The purpose of this study was to test the application of health behavior theory in an on-line intervention designed to address health behaviors such as exercise and nutrition in a sample of overweight older adolescents. Using a pre-test, post-test, randomized, control group design, participants (n=71) were randomly assigned to either the comparison (Information) group, or the treatment (Information plus Discussion) group. Specific aims of the study were: 1) To test a new health behavior theory, the Model of Influence of Social Support on Health Behavior (MISSHRB), in a group of older adolescents; 2) To determine the feasibility and clinical utility of an internet intervention for social support for overweight older adolescents, and 3) To examine the impact of that intervention on the MISSHB variables. Results provided partial support for the MISSHRB, with social support correlating significantly with expectancies, attitudes, and perceived behavioral control. Results also provided support for the hypotheses that family general support, family specific support, attitudes, and engagement in health behaviors would improve over time. Results supported the feasibility of using an internet intervention with overweight older adolescents, with participants easily engaging in the study, fulfilling study requirements and reporting improved perceptions of the utility of online groups for providing social support. Additionally, results approached significance for medical outcomes, with trends representing Body Mass Index decrease over time, and suggesting that the Information plus Discussion group lost more weight than the Information group. These data suggest that internet information and discussion groups have promise as a means of social support for older overweight adolescents who are interested in improving their health behaviors. These results also provide information about the usefulness of web-based programs in facilitating overweight older adolescents engagement in health-related behaviors and the utilization of internet support groups for other marginalized or socially stigmatized groups.

Olson, Wendy Ann

2010-08-01T23:59:59.000Z

124

Enzyme and Microbial Technology 36 (2005) 911916 Structured fiber supports for gas phase biocatalysis  

E-Print Network (OSTI)

Pseudomonas cepaciae lipase adsorbed onto non-porous structured fiber supports in the form of woven fabrics, was used to catalyze hydrolysis and transesterification reactions in the gas phase. The enzyme adsorbed onto carbon fiber support exhibited much higher catalytic activity compared to the enzyme immobilized onto glass fiber carrier. The effect of temperature and relative humidity on reactions catalyzed by P. cepaciae lipase adsorbed onto structured fiber carbon support was studied in the gas system. Under the conditions investigated (up to 60 ? C and 80 % relative humidity), the immobilized enzyme showed a high thermostability and could be efficiently used to catalyze hydrolytic and transesterification reactions in continuous mode. Structured fiber supports, with a high specific surface area and a high mechanical resistance, showed a low-pressure drop during the passage of reactants through a reactor. The approach proposed in this study could be suitable for immobilization of a wide variety of enzymes.

Takoua Debeche A; Cynthia Marmet A; Lioubov Kiwi-minsker B; Albert Renken B

2005-01-01T23:59:59.000Z

125

Social influence on the use of Clinical Decision Support Systems: Revisiting the Unified Theory of Acceptance and Use of Technology by the fuzzy DEMATEL technique  

Science Conference Proceedings (OSTI)

The aim of study is to examine whether social influence affects medical professionals' behavioral intention to use while introducing a new Clinical Decision Support System (CDSS). The series of Technology Acceptance Models (TAMs) have been widely applied ... Keywords: Clinical Decision Support System (CDSS), Fuzzy Decision-Making Trial and Evaluation Laboratory (fuzzy DEMATEL), Social influence, Technology Acceptance Model (TAM), Unified Theory of Acceptance and Use of Technology (UTAUT)

Don Jyh-Fu Jeng; Gwo-Hshiung Tzeng

2012-04-01T23:59:59.000Z

126

Scaleup tests and supporting research for the development of duct injection technology  

SciTech Connect

Gilbert Commonwealth, Southern Research Institute and the American Electric Power Service Corporation have embarked on a program to convert DOE's Duct Injection Test Facility located at the Muskingum River Power Plant of Ohio Power Company to test alternate duct injection technologies. The technologies to be tested include slurry sorbent injection of hydrated lime using dual fluid nozzles, or a rotary atomizer and pneumatic injection of hydrated lime, with flue gas humidification before or after sorbent injection. The literature review and analysis contained in this report is a part of the preparatory effort for the test program.

Gooch, J.P.; Dismukes, E.B.; Dahlin, R.S.; Faulkner, M.G. (Southern Research Inst., Birmingham, AL (United States)); Klett, M.G.; Buchanan, T.L.; Hunt, J.E. (Gilbert/Commonwealth, Inc., Reading, PA (United States))

1989-05-01T23:59:59.000Z

127

Information technology support for knowledge management in the chemical process industry  

Science Conference Proceedings (OSTI)

Effective knowledge management in the Chemical Process Industry (CPI) is intimately linked with the level of development in collection, transfer, analysis, flow and absorption of data/information/knowledge and the implementation of decisions. ... Keywords: ERP, control, cpi, information technology, knowledge management, optimisation, plant information, simulation, supply chain

Amalendu Datta

2003-07-01T23:59:59.000Z

128

Investigating models for preservice teachers' use of technology to support student-centered learning  

Science Conference Proceedings (OSTI)

The study addressed two limitations of previous research on factors related to teachers' integration of technology in their teaching. It attempted to test a structural equation model (SEM) of the relationships among a set of variables influencing preservice ... Keywords: Elementary education, Improving classroom teaching, Pedagogical issues, Secondary education

Rong-Ji Chen

2010-08-01T23:59:59.000Z

129

Program on Technology Innovation: Thermodynamic Data to Support High-Temperature Syngas Quench Design  

Science Conference Proceedings (OSTI)

This report describes the development of a method for predicting water content in synthesis gas (syngas) quenched at high temperature by water. The method, generated by the National Institute of Standards and Technology (NIST), is presented in detail along with further analysis performed by EPRI.

2008-01-31T23:59:59.000Z

130

Topology forming and optimization framework for heterogeneous wireless back-haul networks supporting unidirectional technologies  

Science Conference Proceedings (OSTI)

Wireless operators, in developed or emerging regions, must support triple-play service offerings as demanded by the market or mandated by regulatory bodies through so-called Universal Service Obligations (USOs). Since individual operators might face ... Keywords: All-IP network, IEEE 802.21, MPLS, Multi-radio WNM, QoS, Traffic engineering, Unidirectional links

M. Kretschmer; P. Batroff; G. Ghinea

2013-03-01T23:59:59.000Z

131

Decision Support for Retirement Portfolio Management: Overcoming Myopic Loss Aversion via Technology Design  

Science Conference Proceedings (OSTI)

As firms continue to abandon pensions in favor of employee-managed retirement plans, tremendous demands are being placed on the decision-making proficiency of future retirees. As reflected in the equity premium puzzle, individual investors tend to hold ... Keywords: decision support systems, decisional guidance, equity premium puzzle, field experiment, human-computer interaction, information horizon, myopic loss aversion, retirement planning, system restrictiveness

Clayton Arlen Looney; Andrew M. Hardin

2009-10-01T23:59:59.000Z

132

Implementation Activities supporting the International Technology Scan on Long-Life concrete Pavements.  

E-Print Network (OSTI)

Implementation Plan (STIP) recommendations. The requested implementation support will be on a task order basis. The STIP recommendations are summarized below as identified in the draft STIP plan. Long-Life Concrete Pavements STIP - Initial Recommendations for Implementation Version 7, dated October 13, 2006 The long

133

Technology policy for the knowledge economy: Public support to young ICT service firms  

Science Conference Proceedings (OSTI)

Public intervention in high-tech sectors is often advocated to resolve market imperfections that may possibly limit the viability of young high-tech enterprises. Although some European countries have adopted national government support policies that ... Keywords: Horizontal direct public subsidies, Italy, Young ICT service firms

Massimo G. Colombo; Luca Grilli

2007-11-01T23:59:59.000Z

134

Program on Technology Innovation: Continued Technical Support to NEI on Risk-Informed Regulations  

Science Conference Proceedings (OSTI)

This report documents work performed in CY 2006 by EPRI in support of the Nuclear Energy Institute (NEI). Effective nuclear safety risk management can effectively address nuclear safety and economic risk concerns. While there is an increasing risk management culture at plants with many risk management activities embedded in most plant processes, there is a need to define what is effective risk management and to provide a means to assess the effectiveness. The objectives of this work are to 1) identify as...

2006-12-13T23:59:59.000Z

135

To Evaluate Zero Emission Propulsion and Support Technology for Transit Buses  

DOE Green Energy (OSTI)

This report provides evaluation results for prototype fuel cell transit buses operating at Santa Clara Valley Transportation Authority (VTA) in San Jose, California, in partnership with the San Mateo County Transit District in San Carlos, California. VTA has been operating three fuel cell transit buses in extra revenue service since February 28, 2005. This report provides descriptions of the equipment used, early experiences, and evaluation results from the operation of the buses and the supporting hydrogen infrastructure from March 2005 through July 2006.

Kevin Chandler; Leslie Eudy

2006-11-01T23:59:59.000Z

136

Technical Support Document: 50% Energy Savings Design Technology Packages for Medium Office Buildings  

Science Conference Proceedings (OSTI)

This Technical Support Document (TSD) describes the process and methodology for development of the Advanced Energy Design Guide for Medium Offices (AEDG-MO or the Guide), a design guidance document which intends to provide recommendations for achieving 50% energy savings in medium office buildings that just meet the requirements of ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings.

Thornton, Brian A.; Wang, Weimin; Lane, Michael D.; Rosenberg, Michael I.; Liu, Bing

2009-09-01T23:59:59.000Z

137

Handbook for personal computer versions enhanced oil recovery predictive models: Supporting technology for enhanced oil recovery  

SciTech Connect

The personal computer (PC) programs described in this handbook were adapted from the Tertiary Oil Recovery Information System (TORIS) enhanced oil recovery (EOR) predictive models. The models, both those developed for the Department of Energy and those developed for the National Petroleum Council (NPC), were designed by Scientific Software-Intercomp and were used in the 1984 NPC study on the national potential for enhanced oil recovery. The Department of Energy, Bartlesville Project Office, supported the NPC study and has maintained the models since the study was completed. 10 refs.

Allison, E.; Waldrop, R.; Ray, R.M.

1988-02-01T23:59:59.000Z

138

Engineering activities at the MIT research reactor in support of power reactor technology  

SciTech Connect

The Massachusetts Institute of Technology (MIT) research reactor (MITR-II) is a 5-MW(thermal) light-water-cooled and-moderated reactor (LWR) with in-core neutron and gamma dose rates that closely approximate those in current LWRs. Compact in-pile loops that simulate pressurized water reactor (PWR) and boiling water reactor (BWR) thermal hydraulics and coolant chemistry have been designed for installation in the MITR-II. A PWR loop has been completed and is currently operating in the reactor. A BWR loop is under construction, and an in-pile facility for irradiation-assisted stress corrosion crack (IASCC) testing is being designed. Another major area of research and on-line testing is the closed-loop, nonlinear, digital control of various reactor parameters, including the power level, temperature, and net energy production.

Harling, O.K.; Bernard, J.A.; Driscoll, M.J.; Kohse, G.E.; Ballinger, R.G.

1989-01-01T23:59:59.000Z

139

Analyzing the Life Cycle Energy Savings of DOE Supported Buildings Technologies  

SciTech Connect

This report examines the factors that would potentially help determine an appropriate analytical timeframe for measuring the U.S. Department of Energy's Building Technology (BT) benefits and presents a summary-level analysis of the life cycle savings for BTs Commercial Buildings Integration (CBI) R&D program. The energy savings for three hypothetical building designs are projected over a 100-year period using Building Energy Analysis and Modeling System (BEAMS) to illustrate the resulting energy and carbon savings associated with the hypothetical aging buildings. The report identifies the tasks required to develop a long-term analytical and modeling framework, and discusses the potential analytical gains and losses by extending an analysis into the long-term.

Cort, Katherine A.; Hostick, Donna J.; Dirks, James A.; Elliott, Douglas B.

2009-08-31T23:59:59.000Z

140

Analyzing the Life Cycle Energy Savings of DOE Supported Buildings Technologies  

SciTech Connect

This report examines the factors that would potentially help determine an appropriate analytical timeframe for measuring the U.S. Department of Energy's Building Technology (BT) benefits and presents a summary-level analysis of the life cycle savings for BTs Commercial Buildings Integration (CBI) R&D program. The energy savings for three hypothetical building designs are projected over a 100-year period using Building Energy Analysis and Modeling System (BEAMS) to illustrate the resulting energy and carbon savings associated with the hypothetical aging buildings. The report identifies the tasks required to develop a long-term analytical and modeling framework, and discusses the potential analytical gains and losses by extending an analysis into the long-term.

Cort, Katherine A.; Hostick, Donna J.; Dirks, James A.; Elliott, Douglas B.

2009-08-31T23:59:59.000Z

Note: This page contains sample records for the topic "fixed support technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Energy Saving Melting and Revert Reduction Technology (E-SMARRT): Design Support for Tooling Optimization  

Science Conference Proceedings (OSTI)

High pressure die casting is an intrinsically efficient net shape process and improvements in energy efficiency are strongly dependent on design and process improvements that reduce scrap rates so that more of the total consumed energy goes into acceptable, usable castings. Computer simulation has become widely used within the industry but use is not universal. Further, many key design decisions must be made before the simulation can be run and expense in terms of money and time often limits the number of decision iterations that can be explored. This work continues several years of work creating simple, very fast, design tools that can assist with the early stage design decisions so that the benefits of simulation can be maximized and, more importantly, so that the chances of first shot success are maximized. First shot success and better running processes contributes to less scrap and significantly better energy utilization by the process. This new technology was predicted to result in an average energy savings of 1.83 trillion BTUs/year over a 10 year period. Current (2011) annual energy saving estimates over a ten year period, based on commercial introduction in 2012, a market penetration of 30% by 2015 is 1.89 trillion BTUs/year by 2022. Along with these energy savings, reduction of scrap and improvement in yield will result in a reduction of the environmental emissions associated with the melting and pouring of the metal which will be saved as a result of this technology. The average annual estimate of CO2 reduction per year through 2022 is 0.037 Million Metric Tons of Carbon Equivalent (MM TCE).

Wang, Dongtao

2011-09-23T23:59:59.000Z

142

A comparison of carbide fracture during fixed depth and fixed load scratch tests  

SciTech Connect

In order to simulate abrasion of dual-phase materials containing large carbides under fixed depth conditions an apparatus has been designed and used to perform scratch tests at a fixed depth of cut on such materials. The scratch test consists of two support arms tipped with small steel balls held in contact with surface by /sup 700/ g, while the scratch tool is mounted on the tip of a central arm whose adjustable length allow control of the depth of cut. The scratch tool does not deflect significant when it encounters a large carbide. Scratch tests with the new apparatus have been performed on Co-base Stellite alloys containing large Cr-rich carbides, using individual particles of alumina as scratch tools to generate fixed depth scratches. A in situ SEM scratch test apparatus has also been used to genrate fixed load scratches. Comparison of the scratches shows that for comparable average scratch depths, under fixed load conditions the scratch tool deflects over the carbides without causing fracture, but that since it cannot deflect under fixed depth conditions it induces gross carbide fracture. Results suggest that the fixed depth scratch test can be successfully employed to simulate fixed depth abrasion, which has been previously shown to generate gross carbide fracture in these alloys. The in situ SEM scratch test simulates fixed load abrasion conditions such as those which occur in rubber wheel abrasion tests. 12 refs., 9 figs

Prasad, S.V.; Kosel, T.H.

1985-01-01T23:59:59.000Z

143

Basic research opportunities to support LNG technology. Topical report, July 1989-December 1990  

Science Conference Proceedings (OSTI)

As additional gas reserves come on production during the next decade in areas with limited local markets, worldwide LNG trade is expected to expand. The availability of dedicated LNG tankers may well determine the rate at which this growth occurs. Plans are being made now to bring the four U.S. import terminals up to capacity during this period. As LNG becomes a more significant factor in the domestic natural gas market, consideration should be given to applications other than simply regassifying and comingling it with other supplies entering the pipeline grid. The higher energy density and the low temperature of LNG offer opportunities for expanding the use of natural gas into the industrial and transportation sectors. Greater use of LNG in peak shaving and intermediate storage may also provide benefits in increased reliability and performance of the gas transmission and distribution grid. In order to provide new and more cost-effective technologies to respond to these opportunities, it is recommended that GRI broaden the range of research it is currently performing on LNG.

Groten, B.

1991-03-01T23:59:59.000Z

144

Technologies  

Technologies Materials. Aggregate Spray for Air Particulate; Actuators Made From Nanoporous Materials; Ceramic Filters; Energy Absorbing Material; Diode Arrays for ...

145

Technologies  

Science & Technology. Weapons & Complex Integration. News Center. News Center. Around the Lab. Contacts. For Reporters. Livermore Lab Report. ...

146

Technologies  

Technologies Energy. Advanced Carbon Aerogels for Energy Applications; Distributed Automated Demand Response; Electrostatic Generator/Motor; Modular Electromechanical ...

147

Technologies  

Technologies Energy, Utilities, & Power Systems. Advanced Carbon Aerogels for Energy Applications; Distributed Automated Demand Response; Electrostatic Generator/Motor

148

Technologies  

Technologies Research Tools. Cell-Free Assembly of NanoLipoprotein Particles; Chemical Prism; Lawrence Livermore Microbial Detection Array (LLMDA) ...

149

Inertial confinement fusion target component fabrication and technology development support: Annual report, October 1, 1993--September 30, 1994  

Science Conference Proceedings (OSTI)

On December 30, 1990, the US Department of Energy entered into a contract with General Atomics (GA) to be the Inertial Confinement Fusion (ICF) Target Component Fabrication and Technology Development Support contractor. During the period, GA was assigned 17 tasks in support of the Inertial Confinement Fusion program and its laboratories. This year they achieved full production capabilities for the micromachining, dimensional characterization and gold plating of hohlraums. They fabricated and delivered 726 gold-plated mandrels of 27 different types to LLNL and 48 gold-plated mandrels of two different types to LANL. They achieved full production capabilities in composite capsule production ad delivered in excess of 240 composite capsules. They continuously work to improve performance and capabilities. They were also directed to dismantle, remove, and disposition all equipment at the previous contractor (KMSF) that had radioactive contamination levels low enough that they could be exposed to the general public without radiological constraints. GA was also directed to receive and store the tritium fill equipment. They assisted LANL in the development of techniques for characterization of opaque targets. They developed deuterated and UV-opaque polymers for use by the University of Rochester`s Laboratory for Laser Energetics (UR/LLE) and devised a triple-orifice droplet generator to demonstrate the controlled-mass nature of the microencapsulation process. The ICF program is anticipating experiments at NIF and the Omega Upgrade. Both facilities will require capsules containing layered D{sub 2} or D-T fuel. They continued engineering and assembly of equipment for a cryogenic target handling system for UR/LLE that will fill, transport, layer, and characterize targets filled with cryogenic deuterium or deuterium-tritium fuel, and insert these cryogenic targets into the OMEGA Upgrade target chamber for laser implosion experiments.

Hoppe, M. [ed.

1995-04-01T23:59:59.000Z

150

Information technology to support improved care for chronic illness. Journal of general internal medicine, 22 Suppl 3(0):425 430  

E-Print Network (OSTI)

BACKGROUND: In populations with chronic illness, outcomes improve with the use of care models that integrate clinical information, evidence-based treatments, and proactive management of care. Health information technology is believed to be critical for efficient implementation of these chronic care models. Health care organizations have implemented information technologies, such as electronic medical records, to varying degrees. However, considerable uncertainty remains regarding the relative impact of specific informatics technologies on chronic illness care. OBJECTIVE: To summarize knowledge and increase expert consensus regarding informatics components that support improvement in chronic illness care. Design: A systematic review of the literature was performed. Use

Er S. Young; Edmund Chaney; Rebecca Shoai; Mary K. Goldstein

2007-01-01T23:59:59.000Z

151

Apparatus for fixing latency  

DOE Patents (OSTI)

An apparatus for fixing computational latency within a deterministic region on a network comprises a network interface modem, a high priority module and at least one deterministic peripheral device. The network interface modem is in communication with the network. The high priority module is in communication with the network interface modem. The at least one deterministic peripheral device is connected to the high priority module. The high priority module comprises a packet assembler/disassembler, and hardware for performing at least one operation. Also disclosed is an apparatus for executing at least one instruction on a downhole device within a deterministic region, the apparatus comprising a control device, a downhole network, and a downhole device. The control device is near the surface of a downhole tool string. The downhole network is integrated into the tool string. The downhole device is in communication with the downhole network.

Hall, David R. (Provo, UT); Bartholomew, David B. (Springville, UT); Moon, Justin (Bountiful, UT); Koehler, Roger O. (Provo, UT)

2009-09-08T23:59:59.000Z

152

Technologies  

High Performance Computing (HPC) Technologies; Industrial Partnerships Office P.O. Box 808, L-795 Livermore, CA 94551 Phone: (925) 422-6416 Fax: (925) ...

153

Major Government-Supported Fuel Cell Vehicle Projects Government support for fuel cell projects is critical to the development of fuel cell technology.  

E-Print Network (OSTI)

provide most of its power. In the future, there are plans to use fuel cells, a solar-thermal system. The Centre also will house a "National Research Flagship," entitled "Energy Transformed," that will focus sustainable energy technologies, including solar, gas micro-turbines, and wind generators that will initially

154

A probabilistic reasoning-based decision support system for selection of remediation technologies for petroleum-contaminated sites  

Science Conference Proceedings (OSTI)

Selection of remediation technologies for petroleum-contaminated sites is difficult given the large number of technologies available and inherent uncertainties involved in the selection process. In this paper, we explore the use of an inexact algorithm ... Keywords: Petroleum contamination, Probabilistic reasoning, Remediation technologies

L. He; C. W. Chan; G. H. Huang; G. M. Zeng

2006-05-01T23:59:59.000Z

155

Fixed Bed Biomass Gasifier  

DOE Green Energy (OSTI)

The report details work performed by Gazogen to develop a novel biomass gasifier for producimg electricity from commercially available hardwood chips. The research conducted by Gazogen under this grant was intended to demonstrate the technical and economic feasibility of a new means of producing electricity from wood chips and other biomass and carbonaceous fuels. The technical feasibility of the technology has been furthered as a result of the DOE grant, and work is expected to continue. The economic feasibility can only be shown when all operational problems have been overocme. The technology could eventually provide a means of producing electricity on a decentralized basis from sustainably cultivated plants or plant by-products.

Carl Bielenberg

2006-03-31T23:59:59.000Z

156

Technolog  

NLE Websites -- All DOE Office Websites (Extended Search)

Research in Research in Science and Technolog y Sandia pushes frontiers of knowledge to meet the nation's needs, today and tomorrow Sandia National Laboratories' fundamental science and technology research leads to greater understanding of how and why things work and is intrinsic to technological advances. Basic research that challenges scientific assumptions enables the nation to push scientific boundaries. Innovations and breakthroughs produced at Sandia allow it to tackle critical issues, from maintaining the safety, security and effectiveness of the nation's nuclear weapons and preventing domestic and interna- tional terrorism to finding innovative clean energy solutions, develop- ing cutting-edge nanotechnology and moving the latest advances to the marketplace. Sandia's expertise includes:

157

Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Computers and the internet play an increasingly larger role in the lives of students. In this activity, students must use various web sites to locate specific pieces of...

158

Analysis of Consumer Response to Automobile Regulation and Technological Change in Support of California Climate Change Rulemaking  

E-Print Network (OSTI)

Explicit Policy Tool: Case of CNG in New Zealandbattery electric vehicle, a CNG vehicle, or clean diesel. Weand technologies, e.g. , CNG and electric vehicles. Most

Kurani, Kenneth S; Turrentine, Tom

2004-01-01T23:59:59.000Z

159

MHK Technologies/Atlantisstrom | Open Energy Information  

Open Energy Info (EERE)

Atlantisstrom Atlantisstrom < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Atlantisstrom.jpg Technology Profile Primary Organization Atlantisstrom Technology Resource Click here Current Technology Type Click here Cross Flow Turbine Technology Readiness Level Click here TRL 1 3 Discovery Concept Def Early Stage Dev Design Engineering Technology Description Five drop shaped vanes 20 meters length are placed between two circular metal plates 8 meter diameter and are held in place by two supports The assembly is fixed between two opposing rock faces in a narrow fjord and rotates at approximately 7 RPM Technology Dimensions Device Testing Date Submitted 51:25.6 << Return to the MHK database homepage Retrieved from "http://en.openei.org/w/index.php?title=MHK_Technologies/Atlantisstrom&oldid=681544

160

DOE-Supported Technology Passes Scale-Up Test Converting CO DOE-Sponsored Research Improves Gas Turbine Performance  

NLE Websites -- All DOE Office Websites (Extended Search)

into Valuable Materials into Valuable Materials Publications News Release Release Date: June 17, 2013 DOE-Sponsored Research Improves Gas Turbine Performance DOE Lab Receives Award for Work on Drilling Technology An innovative airfoil manufacturing technology that promises to improve the performance of state-of-the-art gas turbines has been commercialized through research sponsored by the U.S. Department of Energy. Photo courtesy of Mikro Systems, Inc. Washington, D.C. - An innovative airfoil manufacturing technology that promises to improve the performance of state-of-the-art gas turbines has been commercialized through research sponsored by the U.S. Department of Energy (DOE). The technology - which is expected to contribute to cleaner, more reliable and affordable domestic energy production as well as creating new

Note: This page contains sample records for the topic "fixed support technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Empirical support for global integrated assessment modeling: Productivity trends and technological change in developing countries' agriculture and electric power sectors  

E-Print Network (OSTI)

Council on Energy and Environment, for Mexico, the NationalMexico, Brazil, and Indonesia), examining long-run trends in productivity, technological change, energy andenergy-intensive manufacturing sectors of five developing countries, India, Brazil, Mexico,

Sathaye, Jayant A.

2000-01-01T23:59:59.000Z

162

Wind Speed Technology Phase II: Semisubmersible Platform and Anchor Foundation Systems for Wind Turbine Support; Concept Marine Associates, Inc.  

SciTech Connect

This fact sheet describes a subcontract with Concept Marine Associates, Inc. to evaluate and optimize a semisubmersible platform and anchor foundation system that can support a 5-MW wind turbine.

2006-03-01T23:59:59.000Z

163

Enabling technologies: Supporting the development and use of innovative, energy-efficient, and environmentally friendly products and processes  

Science Conference Proceedings (OSTI)

This pamphlet describes the Office of Industrial Technologies cooperative efforts to address industry needs for advanced materials, sensors and controls, process energy and energy efficiency. US industry needs enabling materials that are stronger and lighter, with resistance to high-temperature fatigue and improved resistance to corrosion and wear. New industrial materials such as intermetallic alloys and advanced ceramics have the potential to meet the challenges of the Industries of the Future. The manufacturing industries obtain over 85% of their energy from the on-site combustion of fuels. Enhancements to burners, boilers, and process heating systems can lower energy costs, reduce emissions, enhance fuel options, and increase safety and reliability. Robust, integrated measurement devices linked to intelligent control systems will enable US industry to use resources more efficiently and improve product quality. Through constant process monitoring and adjustment of parameters, these systems can reduce energy use and labor, minimize waste and pollution, and boost productivity. The Enabling Technologies Program is designed to address the cross-cutting needs of the Office of Industrial Technologies (OIT). OIT partners with industry to promote the development and use of energy-efficient, pollution-preventing technologies. The Nation`s environment benefits from greater use of these technologies, and industries benefit from cost savings, improved productivity, and increased competitiveness.

NONE

1999-02-01T23:59:59.000Z

164

Demonstration Initiative for a Grid Support Energy Storage System using Li-ion Technology: Phase I Report  

Science Conference Proceedings (OSTI)

This report documents a research project to scope and implement an initiative to catalyze the early market deployment of a utility-scale electric energy storage system, a project that leverages Lithium-ion (Li-ion) battery technology being globally scaled to serve emerging electric and hybrid electric vehicle markets. The impressive scale of Li-ion battery production and R&D is driving a trend in cost reduction and performance improvements that make this technology attractive for certain grid storage app...

2012-07-31T23:59:59.000Z

165

Scaleup tests and supporting research for the development of duct injection technology. Topical report No. 1, Literature review  

Science Conference Proceedings (OSTI)

Gilbert Commonwealth, Southern Research Institute and the American Electric Power Service Corporation have embarked on a program to convert DOE`s Duct Injection Test Facility located at the Muskingum River Power Plant of Ohio Power Company to test alternate duct injection technologies. The technologies to be tested include slurry sorbent injection of hydrated lime using dual fluid nozzles, or a rotary atomizer and pneumatic injection of hydrated lime, with flue gas humidification before or after sorbent injection. The literature review and analysis contained in this report is a part of the preparatory effort for the test program.

Gooch, J.P.; Dismukes, E.B.; Dahlin, R.S.; Faulkner, M.G. [Southern Research Inst., Birmingham, AL (United States); Klett, M.G.; Buchanan, T.L.; Hunt, J.E. [Gilbert/Commonwealth, Inc., Reading, PA (United States)

1989-05-01T23:59:59.000Z

166

NREL's Field Data Repository Supports Accurate Home Energy Analysis (Fact Sheet), Building America: Technical Highlight, Building Technologies Program (BTP)  

NLE Websites -- All DOE Office Websites (Extended Search)

Field Data Field Data Repository Supports Accurate Home Energy Analysis The Residential Buildings Research Group at the National Renewable Energy Laboratory (NREL) has developed a repository of research-level residential building characteristics and historical energy use data to support ongoing efforts to improve the accuracy of residential energy analysis tools and the efficiency of energy assessment processes. The Field Data Repository currently includes data collected from historical programs where residential building characteristics (building geometry, insulation levels, equipment types, etc.), generally collected through energy audits, have been connected to measured energy use. With an emphasis on older homes, the repository contains datasets from Home Energy Rating System

167

Knowledge based engineering: Between AI and CAD. Review of a language based technology to support engineering design  

Science Conference Proceedings (OSTI)

Knowledge based engineering (KBE) is a relatively young technology with an enormous potential for engineering design applications. Unfortunately the amount of dedicated literature available to date is quite low and dispersed. This has not promoted the ... Keywords: Engineering design, Generative design, Knowledge based design, Knowledge based engineering, Knowledge engineering, Rule based design

Gianfranco La Rocca

2012-04-01T23:59:59.000Z

168

Research turbine supports sustained technology development. For more than three decades, engineers at the National Renewable Energy Labora-  

E-Print Network (OSTI)

with the U.S. Department of Energy (DOE) Wind Program and industry partners to advance wind energy technology, and long-term wind energy competi- tiveness to enable aggressive wind energy deployment to meet strategic U.S. energy needs. NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency

169

Gasification advanced research and technology development (AR and TD) cross-cut meeting and review. [US DOE supported  

DOE Green Energy (OSTI)

The US Department of Energy gasification advanced research and technology development (AR and TD) cross-cut meeting and review was held June 24 to 26, 1981, at Germantown, Maryland. Forty-eight papers from the proceedings have been entered individually into EDB and ERA. (LTN)

Not Available

1981-01-01T23:59:59.000Z

170

Program on Technology Innovation: Technical Support for GE Economic Simplified Boiling Water Reactor (ESBWR)-Radwaste System Design  

Science Conference Proceedings (OSTI)

EPRI has undertaken a review of advanced nuclear plant (ANP) radioactive waste system designs. This work updates EPRI's Utility Requirements Document (URD) for the design of Advanced Light Water Reactor plants. The goal is to capture the radwaste elements that have led to the dramatic improvement in radioactive waste processing in terms of technology advances and improved operating strategy seen in today's operating U.S. plants. This work will form the basis for radioactive waste processing systems in th...

2006-11-21T23:59:59.000Z

171

Fixed-Speed and Variable-Slip Wind Turbines Providing Spinning Reserves to the Grid: Preprint  

DOE Green Energy (OSTI)

As the level of wind penetration increases, wind turbine technology must move from merely generating power from wind to taking a role in supporting the bulk power system. Wind turbines should have the capability to provide inertial response and primary frequency (governor) response so they can support the frequency stability of the grid. To provide governor response, wind turbines should be able to generate less power than the available wind power and hold the rest in reserve, ready to be accessed as needed. This paper explores several ways to control wind turbine output to enable reserve-holding capability. This paper focuses on fixed-speed (also known as Type 1) and variable-slip (also known as Type 2) turbines.

Muljadi, E.; Singh, M.; Gevorgian, V.

2012-11-01T23:59:59.000Z

172

Empirical support for global integrated assessment modeling: Productivity trends and technological change in developing countries' agriculture and electric power sectors  

Science Conference Proceedings (OSTI)

Integrated assessment (IA) modeling of climate policy is increasingly global in nature, with models incorporating regional disaggregation. The existing empirical basis for IA modeling, however, largely arises from research on industrialized economies. Given the growing importance of developing countries in determining long-term global energy and carbon emissions trends, filling this gap with improved statistical information on developing countries' energy and carbon-emissions characteristics is an important priority for enhancing IA modeling. Earlier research at LBNL on this topic has focused on assembling and analyzing statistical data on productivity trends and technological change in the energy-intensive manufacturing sectors of five developing countries, India, Brazil, Mexico, Indonesia, and South Korea. The proposed work will extend this analysis to the agriculture and electric power sectors in India, South Korea, and two other developing countries. They will also examine the impact of alternative model specifications on estimates of productivity growth and technological change for each of the three sectors, and estimate the contribution of various capital inputs--imported vs. indigenous, rigid vs. malleable-- in contributing to productivity growth and technological change. The project has already produced a data resource on the manufacturing sector which is being shared with IA modelers. This will be extended to the agriculture and electric power sectors, which would also be made accessible to IA modeling groups seeking to enhance the empirical descriptions of developing country characteristics. The project will entail basic statistical and econometric analysis of productivity and energy trends in these developing country sectors, with parameter estimates also made available to modeling groups. The parameter estimates will be developed using alternative model specifications that could be directly utilized by the existing IAMs for the manufacturing, agriculture, and electric power sectors.

Sathaye, Jayant A.

2000-04-01T23:59:59.000Z

173

Inertial confinement fusion target component fabrication and technology development support. Annual report, October 1, 1996--September 30, 1997  

Science Conference Proceedings (OSTI)

This report documents the technical activities of the period October 1, 1996 through September 30, 1997. During this period, GA and their partner Schafer Corporation were assigned 13 formal tasks in support of the ICF program and its five laboratories. A portion of the effort on these tasks included providing direct {open_quotes}Onsite Support{close_quotes} at Lawrence Livermore National Laboratory (LLNL), Los Alamos National Laboratory (LANL), and Sandia National Laboratory Albuquerque (SNLA). Over 700 gold-plated hohlraum mandrels were fabricated and delivered to LLNL, LANL and SNLA. More than 1600 glass and plastic target capsules were produced for LLNL, LANL, SNLA and University of Rochester/Laboratory for Laser Energetics (UR/LLE). Nearly 2000 various target foils and films were delivered for Naval Research Lab (NRL) and UR/LLE in FY97. This report describes these target fabrication activities and the target fabrication and characterization development activities that made the deliveries possible. The ICF program is anticipating experiments at the OMEGA laser and the National Ignition Facility (NIF) which will require targets containing cryogenic layered D{sub 2} or deuterium-tritium (DT) fuel. This project is part of the National Cryogenic Target Program and support experiments at LLNL and LANL to generate and characterize cryogenic layers for these targets. During FY97, significant progress was made in the design and component testing of the OMEGA Cryogenic Target System that will field cryogenic targets on OMEGA. This included major design changes, reduction in equipment, and process simplifications. This report summarizes and documents the technical progress made on these tasks.

Gibson, J. [ed.

1998-03-01T23:59:59.000Z

174

Recommendations for Tritium Science and Technology Research and Development in Support of the Tritium Readiness Campaign, TTP-7-084  

SciTech Connect

Between 2006 and 2012 the Tritium Readiness Campaign Development and Testing Program produced significant advances in the understanding of in-reactor TPBAR performance. Incorporating these data into existing TPBAR performance models has improved permeation predictions, and the discrepancy between predicted and observed tritium permeation in the WBN1 coolant has been decreased by about 30%. However, important differences between predicted and observed permeation still remain, and there are significant knowledge gaps that hinder the ability to reliably predict other aspects of TPBAR performance such as tritium distribution, component integrity, and performance margins. Based on recommendations from recent Tritium Readiness Campaign workshops and reviews coupled with technical and programmatic priorities, high-priority activities were identified to address knowledge gaps in the near- (3-5 year), middle- (5-10 year), and long-term (10+ year) time horizons. It is important to note that there are many aspects to a well-integrated research and development program. The intent is not to focus exclusively on one aspect or another, but to approach the program in a holistic fashion. Thus, in addition to small-scale tritium science studies, ex-reactor tritium technology experiments such as TMED, and large-scale in-reactor tritium technology experiments such as TMIST, a well-rounded research and development program must also include continued analysis of WBN1 performance data and post-irradiation examination of TPBARs and lead use assemblies to evaluate model improvements and compare separate-effects and integral component behavior.

Senor, David J.

2013-10-30T23:59:59.000Z

175

Fixed.  

E-Print Network (OSTI)

??In June of 2008 I was involved in a severe accident that altered the way I perceive and interact with objects. The everyday tasks I (more)

Gehman, Jordan Douglas

2013-01-01T23:59:59.000Z

176

Note on R&D expenditures and fixed capital formation  

Science Conference Proceedings (OSTI)

In this paper we deal with the fixed capital nature of the means of production and labour employed in research and development which generate scientific and technological knowledge. We argue that these R&D current expenditures typically have the ... Keywords: Capital, Innovation, Research

Mario Marchi; Maurizio Rocchi

2010-11-01T23:59:59.000Z

177

Security Technologies Group  

Science Conference Proceedings (OSTI)

Security Technologies Group. Welcome. Our group develops measurement science in support of performance-based standards ...

2012-10-24T23:59:59.000Z

178

Requirements for a Dynamic Solvent Extraction Module to Support Development of Advanced Technologies for the Recycle of Used Nuclear Fuel  

Science Conference Proceedings (OSTI)

The Department of Energy's Nuclear Energy Advanced Modeling and Simulation (NEAMS) Program has been established to create and deploy next generation, verified and validated nuclear energy modeling and simulation capabilities for the design, implementation, and operation of future nuclear energy systems to improve the U.S. energy security. As part of the NEAMS program, Integrated Performance and Safety Codes (IPSC's) are being produced to significantly advance the status of modeling and simulation of energy systems beyond what is currently available to the extent that the new codes be readily functional in the short term and extensible in the longer term. The four IPSC areas include Safeguards and Separations, Reactors, Fuels, and Waste Forms. As part of the Safeguards and Separations (SafeSeps) IPSC effort, interoperable process models are being developed that enable dynamic simulation of an advanced separations plant. A SafeSepss IPSC 'toolkit' is in development to enable the integration of separation process modules and safeguards tools into the design process by providing an environment to compose, verify and validate a simulation application to be used for analysis of various plant configurations and operating conditions. The modules of this toolkit will be implemented on a modern, expandable architecture with the flexibility to explore and evaluate a wide range of process options while preserving their stand-alone usability. Modules implemented at the plant-level will initially incorporate relatively simple representations for each process through a reduced modeling approach. Final versions will incorporate the capability to bridge to subscale models to provide required fidelity in chemical and physical processes. A dynamic solvent extraction model and its module implementation are needed to support the development of this integrated plant model. As a stand-alone application, it will also support solvent development of extraction flowsheets and integrated safeguards approaches within the Fuel Cycle Research and Development (FCR&D) Program. The purpose of this document is to identify the requirements for this dynamic solvent extraction model to guide process modelers and code developers to produce a computational module that meets anticipated future needs.

Jack Law; Veronica Rutledge; Candido Pereira; Jackie Copple; Kurt Frey; John Krebs; Laura Maggos; Kevin Nichols; Kent Wardle; Pratap Sadasivan; Valmor DeAlmieda; David Depaoli

2011-06-01T23:59:59.000Z

179

Review of US Department of Energy health and environmental research and development program support to SRC-II technology development  

DOE Green Energy (OSTI)

This document outlines the technical framework of DOE's overall synthetic fuels health and environmental characterization program. Current project environmental activities directly associated with SRC-II technology development are summarized for the convenience of the Environmental Impact Statement reviewers. An extended, technically detailed statement of the SRC-II health and environmental program, activities, and plans was released in late 1980, as part of the final Environmental Impact Statement of the SRC-II Demonstration Project. Program development is necessarily iterative. Early screening results on a small scale equipment suggest the need for further screening studies on a larger-scale system. Results of screening studies set the priorities for more extensive and costly long-term baseline biological and ecological studies. Parametric studies establish the sensitivity of measured screening and baseline characteristics to changes in processing conditions and also provide a basis for correlating low- and high-tier biological and ecological test information. Monitoring system development is stimulated by findings in screening and baseline characterization efforts. Choice of monitoring systems is dependent upon screening and baseline biological and ecological test results and results of initial site analyses. As a result, the overall characterization program necessarily emerges in phases, each with a distribution of activities in the four component areas. Characterization efforts on PDU- and pilot-scale equipment focus on screening and baseline studies of steady state and non-steady state production. At the demonstration scale, these activities are expanded to include extensive monitoring and the investigation of large-scale steady state and non-steady state effluent production and control characteristics.

Massey, M.J.; Fillo, J.P.; Kreisher, J.H.; Sgro, G.A.

1980-07-01T23:59:59.000Z

180

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Courtesy of ZCorp The Rapid Prototyping Laboratory (RPL) supports internal design, manufacturing, and process development with three rapid prototyping (RP) technologies:...

Note: This page contains sample records for the topic "fixed support technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

CHARACTERIZATION OF PLUTONIUM CONTAMINATED SOILS FROM THE NEVADA TEST SITE IN SUPPORT OF EVALUATION OF REMEDIATION TECHNOLOGIES  

SciTech Connect

The removal of plutonium from Nevada Test Site (NTS) area soils has previously been attempted using various combinations of attrition scrubbing, size classification, gravity based separation, flotation, air flotation, segmented gate, bioremediation, magnetic separation and vitrification. Results were less than encouraging, but the processes were not fully optimized. To support additional vendor treatability studies soil from the Clean Slate II site (located on the Tonopah Test Range, north of the NTS) were characterized and tested. These particular soils from the NTS are contaminated primarily with plutonium-239/240 and Am-241. Soils were characterized for Pu-239/240, Am-241 and gross alpha. In addition, wet sieving and the subsequent characterization were performed on soils before and after attrition scrubbing to determine the particle size distribution and the distribution of Pu- 239/240 and gross alpha as a function of particle size. Sequential extraction was performed on untreated soil to provide information about how tightly bound the plutonium was to the soil. Magnetic separation was performed to determine if this could be useful as part of a treatment approach. The results indicate that about a 40% volume reduction of contaminated soil should be achievable by removing the >300 um size fraction of the soil. Attrition scrubbing does not effect particle size distribution, but does result in a slight shift of plutonium distribution to the fines. As such, attrition scrubbing may be able to slightly increase the ability to separate plutonium-contaminated particles from clean soil. This could add another 5-10% to the mass of the clean soil, bringing the total clean soil to 45-50%. Additional testing would be needed to determine the value of using attrition scrubbing as well as screening the soil through a sieve size slightly smaller than 300 um. Since only attrition scrubbing and wet sieving would be needed to attain this, it would be good to conduct this investigation. Magnetic separation did not work well. The sequential extraction studies indicated that a significant amount of plutonium was soluble in the ''organic'' and ''resistant'' extracts. As such chemical extraction based on these or similar extractants should also be considered as a possible treatment approach.

Torrao, Guilhermina; Carlino, Robert; Hoeffner, Steve L.; Navratil, James D.

2003-02-27T23:59:59.000Z

182

USING TECHNOLOGY TO SUPPORT PROACTIVE MANAGEMENT OF MATERIALS DEGRADATION FOR THE U.S. NUCLEAR REGULATORY COMMISSION  

SciTech Connect

The majority of the U.S. reactor fleet is applying for license renewal to extend the operating life from the current 40 years to 60 years, and there is now active interest in extending the operating life to beyond 60 years. Many plants are also applying for increases in power rating and both of these changes increases the need for an improved understanding of materials degradation. Many materials degrade over time and much is known about the degradation of materials under normal environmental conditions; however, less is known about the characteristics of materials degradation when the environment is subject to higher than normal radiological conditions over extended periods of time. Significant efforts are being made by industrial, academic and regulatory groups worldwide to identify, classify and mitigate potential problems arising from degradation of components in this context. From a regulatory perspective, the U.S. Nuclear Regulatory Commission (USNRC) is very interested in being able to identify ways to insure their licensees proactively manage the identification of materials degradation and the mitigation of its effects. To date, the USNRC has consolidated generic programs for mitigating aging issues in the two volume Generic Aging Lessons Learned (GALL) Report (NUREG-1801) [1][2], and have encouraged applicants for license renewal to use these programs where applicable in their plant when applying for renew of their reactors license. The USNRC has also published a comprehensive report entitled Expert Panel Report on Proactive Materials Degradation (NUREG/CR-6923) [3] that inventories the types of degradation mechanisms that could exist in each component of a Light Water Reactor (LWR) and each degradation mechanism is assessed regarding how much is known about mitigating its effects. Since the number of plant designs and materials used varies greatly within the U.S. fleet, there are many variations to implementing aging management programs (AMPs), requiring significant dialogs between the Licensee and the USNRC. These discussions are part of the licensing basis and as such are documented with up to multi-hundred page responses that are loosely coupled through the USNRC Agency-wide Document Access and Management System (ADAMS), which serves as an electronic records repository for the USNRC . These discussions have supported revisions to the GALL, including the revision that is being prepared as this paper is being written. The USNRC has sought the help of the Pacific Northwest National Laboratory to improve the staffs ability to navigate the significant numbers of documents that are generated in this process and to provide a forum for regulators, licensees and researchers to share knowledge in the efforts to improve the cyclic process for defining, applying, validating and re-defining AMPs. Work to date in this area is publicly accessible and this paper will describe that work and outline a potential path forward. The presenter will also demonstrate the capabilities of the PMMD information tools (http://pmmd.pnl.gov).

Taylor, W Boyd; Knobbs, Katherine J.; Carpenter, C. E. (Gene) [Gene; Malik, Shah

2010-07-19T23:59:59.000Z

183

Mask Attribute - Deprecate or Fix?  

Science Conference Proceedings (OSTI)

... Overlap with the OVAL Results Directives ... Does anyone use the mask attribute in their content ... Do vendors support the mask attribute in their tools ...

2012-10-26T23:59:59.000Z

184

Fixed-Point Cell Mini Workshop  

Science Conference Proceedings (OSTI)

... The ITS-90 Fixed-Point Cell Mini-Workshop is scheduled to be given at ... hands-on" laboratory training in the realization of ITS-90 fixed-point cells. ...

2011-10-03T23:59:59.000Z

185

Videogame technology to support seniors  

Science Conference Proceedings (OSTI)

The current demographic ageing in Europe is the result of a relevant economic, social, and medical development. This is also leading to an increase in the demand for Long Term Care (LTC) by seniors. One viable way to offer qualified cares at home, while ... Keywords: ambient intelligence (AmI), context awareness, healthcare, videogames

Dario Maggiorini; Laura Ripamonti; Andrea Scambia

2012-03-01T23:59:59.000Z

186

Results of 2001 Groundwater Sampling in Support of Conditional No Longer Contained-In Determination for the Snake River Plain Aquifer in the Vicinity of the Idaho Nuclear Technology and Engineering Center  

SciTech Connect

This report summarizes the results of sampling five groundwater monitoring wells in the vicinity of the Idaho Nuclear Technology and Engineering Center at the Idaho National Engineering and Environmental Laboratory in 2001. Information on general sampling practices, quality assurance practices, parameter concentrations, representativeness of sampling results, and cumulative cancer risk are presented. The information is provided to support a conditional No Longer Contained-In Determination for the Snake River Plain Aquifer in the vicinity of the Idaho Nuclear Technology and Engineering Center.

Meachum, T.R.

2002-04-26T23:59:59.000Z

187

High-Temperature-Turbine Technology Program: Phase II. Technology test and support studies. Design and development of the liquid-fueled high-temperature combustor for the Turbine Spool Technology Rig  

SciTech Connect

The concept selected by Curtiss-Wright for this DOE sponsored High Temperature Turbine Technology (HTTT) Program utilizes transpiration air-cooling of the turbine subsystem airfoils. With moderate quantities of cooling air, this method of cooling has been demonstrated to be effective in a 2600 to 3000/sup 0/F gas stream. Test results show that transpiration air-cooling also protects turbine components from the aggressive environment produced by the combustion of coal-derived fuels. A new single-stage, high work transpiration air-cooled turbine has been designed and fabricated for evaluation in a rotating test vehicle designated the Turbine Spool Technology Rig (TSTR). The design and development of the annular combustor for the TSTR are described. Some pertinent design characteristics of the combustor are: fuel, Jet A; inlet temperature, 525/sup 0/F; inlet pressure, 7.5 Atm; temperature rise, 2475/sup 0/F; efficiency, 98.5%; exit temperature pattern, 0.25; and exit mass flow, 92.7 pps. The development program was conducted on a 60/sup 0/ sector of the full-round annular combustor. Most design goals were achieved, with the exception of the peak gas exit temperature and local metal temperatures at the rear of the inner liner, both of which were higher than the design values. Subsequent turbine vane cascade testing established the need to reduce both the peak gas temperature (for optimum vane cooling) and the inner liner metal temperature (for combustor durability). Further development of the 60/sup 0/ combustor sector achieved the required temperature reductions and the final configuration was incorporated in the TSTR full-annular burner.

1981-06-01T23:59:59.000Z

188

Support and maneuvering device  

DOE Patents (OSTI)

A support and maneuvering device includes an elongated flexible inflatable enclosure having a fixed end and a movable end. The movable end is collapsible toward the fixed end to a contracted position when the enclosure is in a noninflated condition. Upon inflation, the movable end is movable away from the fixed end to an extended position. The movable end includes means for mounting an article such as a solar reflector thereon. The device also includes a plurality of position controlling means disposed about the movable end to effect adjusting movement of portions thereof by predetermined amounts and for controlling an angle at which the article disposed at the movable end is oriented. The plurality of position controlling means limits a suitable number degrees of freedom of the movable end for transmitting a steering motion thereto and for controlling the position thereof. 9 figs.

Wood, R.L.

1987-03-23T23:59:59.000Z

189

Support and maneuvering device  

DOE Patents (OSTI)

A support and maneuvering device includes an elongated flexible inflatable enclosure having a fixed end and a movable end. The movable end is collapsible toward the fixed end to a contracted position when the enclosure is in a noninflated condition. Upon inflation, the movable end is movable away from the fixed end to an extended position. The movable end includes means for mounting an article such as a solar reflector thereon. The device also includes a plurality of position controlling means disposed about the movable end to effect adjusting movement of portions thereof by predetermined amounts and for controlling an angle at which the article disposed at the movable end is oriented. The plurality of position controlling means limits a suitable number degrees of freedom of the movable end for transmitting a steering motion thereto and for controlling the position thereof.

Wood, Richard L. (Arvada, CO)

1988-01-01T23:59:59.000Z

190

SF 6432-LA Fixed Price Latin America  

NLE Websites -- All DOE Office Websites (Extended Search)

CORPORATION SF 6432-LA (072013) SECTION II STANDARD TERMS AND CONDITIONS FOR FIXED PRICE CONTRACTS RENEWABLE ENERGY PROGRAMS IN LATIN AMERICAN COUNTRIES THE FOLLOWING CLAUSES...

191

Counterterrorism and Response Technologies (CART)  

Science Conference Proceedings (OSTI)

... and technical support on counterterrorism and response technologies, equipment ... Measurement Laboratory and the Emergency Services Division ...

2012-12-13T23:59:59.000Z

192

Technology Transfer: Available Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Software and Information Technologies Software and Information Technologies Algorithm for Correcting Detector Nonlinearites Chatelet: More Accurate Modeling for Oil, Gas or Geothermal Well Production Collective Memory Transfers for Multi-Core Processors Energy Efficiency Software EnergyPlus:Energy Simulation Software for Buildings Tools, Guides and Software to Support the Design and Operation of Energy Efficient Buildings Flexible Bandwidth Reservations for Data Transfer Genomic and Proteomic Software LABELIT - Software for Macromolecular Diffraction Data Processing PHENIX - Software for Computational Crystallography Vista/AVID: Visualization and Allignment Software for Comparative Genomics Geophysical Software Accurate Identification, Imaging, and Monitoring of Fluid Saturated Underground Reservoirs

193

Tube support  

Science Conference Proceedings (OSTI)

A tube support for supporting horizontal tubes from an inclined vertical support tube passing between the horizontal tubes. A support button is welded to the vertical support tube. Two clamping bars or plates, the lower edges of one bearing on the support button, are removably bolted to the inclined vertical tube. The clamping bars provide upper and lower surface support for the horizontal tubes.

Mullinax, Jerry L. (Green Township, Summit County, OH)

1988-01-01T23:59:59.000Z

194

Fix-Up Loan | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fix-Up Loan Fix-Up Loan Fix-Up Loan < Back Eligibility Low-Income Residential Multi-Family Residential Residential Savings Category Home Weatherization Commercial Weatherization Heating & Cooling Commercial Heating & Cooling Cooling Construction Design & Remodeling Heating Insulation Windows, Doors, & Skylights Energy Sources Buying & Making Electricity Solar Wind Sealing Your Home Appliances & Electronics Water Heating Maximum Rebate $35,000 (see exceptions below) Unsecured loans: $15,000 Program Info Funding Source Fix-Up Fund State Minnesota Program Type State Loan Program Rebate Amount $2,000 - $50,000 Provider Minnesota Housing Finance Agency The Minnesota Housing Finance Agency's (MHFA) Fix-up Loan provides low-interest financing for energy conservation and other basic improvements

195

SAE Standards Support  

Science Conference Proceedings (OSTI)

This report summarizes PNNL activities in FY 2012 in support of the following two vehicle communication standards activities: Technical support to SAE, ANSI and NIST technical working groups. PNNL actively contributed to the use case development, harmonization, and evaluation of the SAE standards activities for vehicle to grid communication Tested and validated a set of potential technologies for meeting SAE communication requirements and provided recommendations for technology choices.

Gowri, Krishnan

2012-11-01T23:59:59.000Z

196

MHK Technologies/Current Catcher | Open Energy Information  

Open Energy Info (EERE)

Catcher Catcher < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Current Catcher.png Technology Profile Primary Organization Offshore Islands Ltd Technology Resource Click here Current Technology Type Click here Axial Flow Turbine Technology Description The Current Catcher harnesses the power and fluctuations of the ocean s currents to generate energy It uses cones to increase the velocity of the ocean current and to direct it to the turbine blades to maximize the production of energy which in turn is transferred through electrical swivels The Current Catcher uses conventional low cost steel tubular frames These frames can support both ocean and tidal current power generators rigidly fixed to the seabed or moored to the seabed

197

On the Fixed-Point Structure of Scalar Fields  

E-Print Network (OSTI)

In a recent Letter (K.Halpern and K.Huang, Phys. Rev. Lett. 74 (1995) 3526), certain properties of the Local Potential Approximation (LPA) to the Wilson renormalization group were uncovered, which led the authors to conclude that $D>2$ dimensional scalar field theories endowed with {\\sl non-polynomial} interactions allow for a continuum of renormalization group fixed points, and that around the Gaussian fixed point, asymptotically free interactions exist. If true, this could herald very important new physics, particularly for the Higgs sector of the Standard Model. Continuing work in support of these ideas, has motivated us to point out that we previously studied the same properties and showed that they lead to very different conclusions. Indeed, in as much as the statements in hep-th/9406199 are correct, they point to some deep and beautiful facts about the LPA and its generalisations, but however no new physics.

Tim R. Morris

1996-01-24T23:59:59.000Z

198

PNNL: EDO - Entrepreneur Support Catalog  

NLE Websites -- All DOE Office Websites (Extended Search)

Protg Program Research District Entrepreneur Support Catalog Facilities & Equipment PNNL Available Technologies Collaborative Research at PNNL Useful Publications TechBiz...

199

Data analysis, analytical support, and technology transfer support for the Federal Energy Management Program Office of Conservation and Renewable Energy Department of Energy. Final technical report, August 8, 1987--August 7, 1992  

SciTech Connect

Activities included the collecting, reporting, and analysis of Federal energy usage and cost data; development of program guidance and policy analysis of Federal energy usage and cost data; development of program guidance and policy analysis; inter-agency liaison; promotion of energy efficiency initiatives; and extensive technology transfer and outreach activities.

Tremper, C.

1992-12-31T23:59:59.000Z

200

Design and Integration of Low-Cost Technologies and Software to Create Interactive Learning and Support Environments which Augment Traditional Learning  

Science Conference Proceedings (OSTI)

This paper presents the preliminary results of a project based on the premise that technologies for learning should not attempt to replace traditional education, but should provide services that facilitate teaching, learning, and education-related administrative ...

Taha A. Taha

2005-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "fixed support technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Test of the Fixed Anvil Temperature Hypothesis  

Science Conference Proceedings (OSTI)

The fixed anvil temperature (FAT) hypothesis is examined based on the Aqua Moderate Resolution Imaging Spectroradiometer (MODIS)-based cloud-top temperature (CTT) in conjunction with the tropical atmospheric profiles and sea surface temperature (...

Yue Li; Ping Yang; Gerald R. North; Andrew Dessler

2012-07-01T23:59:59.000Z

202

Fixed-Parameter tractability, a prehistory,  

Science Conference Proceedings (OSTI)

Many of the foundational parameterized tenets discussed in this festschrift actually predate by over a decade the first systematic treatments of fixed-parameter tractability. In this frank, firsthand account I will, to the best of my recollection, describe ...

Michael A. Langston

2012-01-01T23:59:59.000Z

203

Contracts for field projects and supporting research on enhanced oil recovery and improved drilling technology. Progress review No. 22, quarter ending March 31, 1980  

Science Conference Proceedings (OSTI)

This report contains statements of objectives and summaries of technical progress on all DOE contracts pertaining to enhanced oil recovery and improved drilling techniques. Subject categories include chemical flooding; carbon dioxide injection; thermal recovery of heavy oil; resource assessment; improved drilling technology; residual oil; environmental; petroleum technology; and microbial enhanced oil recovery. An index containing the names of the companies and institutions involved is included. Current publications resulting from the DOE contractual program are listed. (DMC)

Linville, B. (ed.)

1980-07-01T23:59:59.000Z

204

The authors acknowledge contributions of the Institute for the Application of Geospatial Technology (IAGT), at Cayuga Community College, and the support for the development of  

E-Print Network (OSTI)

, Washington, DC The authors appreciate the support received from the National Aeronautics and Space Viewer is developed on a NASA World Wind Software Development Kit (SDK) that runs on Windows or MAC

Columbia University

205

Thermionic converter emitter support arrangement  

DOE Green Energy (OSTI)

This document discusses a support provided for use in a thermionic converter to support an end of an emitter to keep it out of contact with a surrounding collector while allowing the emitter end to move axially as its temperature changes. The emitter end is supported by a spring structure that includes a pair of Belleville springs, and the spring structure is supported by a support structure fixed to the housing that includes the collector. The support structure is in the form of a sandwich with a small metal spring-engaging element at the front end, a larger metal main support at the rear end that is attached to the housing, and with a ceramic layer between them that is bonded by hot isostatic pressing to the metal element and metal main support. The spring structure can include a loose wafer captured between the Belleville springs. 7 figs.

Allen, D.T.

1989-07-06T23:59:59.000Z

206

Idaho National Laboratory - Technology Transfer - Technologies ...  

Idaho National Laboratory Technologies Available for Licensing ... This site will work and look better in a browser that supports web standards, but it is accessible ...

207

K-12 Professional Learning Communities (PLCs) in a Rural School District on the High Plains of Texas: Mechanism for Teacher Support of Innovative Formative Assessment and Instruction with Technology (iFAIT)  

E-Print Network (OSTI)

The purpose of this study was to explore the evolution of collaborative practices of PLCs as they emerge when using technology based formative assessment via iFAIT or innovative Formative Assessment with Instruction and Technology developed by the researcher using audience response systems and the online data compiler, Eduphoria!. This study used sequential explanatory mixed methods to address the problems that schools face when implementing technology based formative assessments to improve instruction and student achievement. A survey administered in September 2012 and again in December 2012 provided a measure of teacher use of formative assessments, technology use in formative assessments, and perceptions of teachers using the PLC as a mechanism of support for technology based formative assessment. Training was facilitated by the researcher as PLCs worked together to develop, administer, and interpret formative assessments. Teacher interviews were conducted, and the study ended with the administration of the December 2012 survey and open-response questions for further qualitative analysis. Quantitative data analysis was completed using ANOVAs to determine if there were significant differences of teacher groups (subject taught, grade level taught, and years of teaching experience) use of iFAIT. This data analysis also included measures of frequency and paired sample t tests between the September and December 2012 responses. Qualitative data was analyzed using hand coding, word clouds, and WordSmith Tools. The triangulation of qualitative data in the quantitative data provided a narrative to document what collaborative factors affected the use of iFAIT. For school improvement and implementation of iFAIT, the study revealed that (1) with the right technology infrastructure, on-going professional development must be offered by administrators or sought after by teachers; (2) teachers must have strong beliefs in formative assessment and the technology that supports it; (3) open lines of communication must be supported through the PLC and administration; (4) teachers must see purpose in using revealing student data to drive instruction; and (5) PLCs must have common beliefs and believe that student achievement is connected to school improvement. PLCs should discuss data, share successes, and plan instruction through extended involvement in face-to-face and online venues as communities of practice.

Talkmitt, Marcia J.

2013-05-01T23:59:59.000Z

208

Fuel Cell Technologies Office: Fuel Cell Technologies Office...  

NLE Websites -- All DOE Office Websites (Extended Search)

Technologies and Products Supported by the Fuel Cell Technologies Office, finds DOE funding has led to more than 360 hydrogen and fuel cell patents, 36 commercial...

209

Sustainability Support  

Energy.gov (U.S. Department of Energy (DOE))

Sustainability Support serves as a corporate technical assistance, coordination, and integration resource to support line organizations in the resolution of sustainability issues and management concerns.

210

Emerging energy-efficient industrial technologies  

E-Print Network (OSTI)

Inc. (Alum-1) [ETSU] Energy Technology Support Unit. 1994.In Encyclopedia of Energy Technology and the Environment.Environmental Energy Technologies Division. (Paper-1) (

2000-01-01T23:59:59.000Z

211

Salt Processing at the Savannah River Site: Results of Technology Down-Selection and Research and Development to Support New Salt Waste Processing Facility  

Science Conference Proceedings (OSTI)

The Department of Energy's (DOE) Savannah River Site (SRS) high-level waste (HLW) program is responsible for storage, treatment, and immobilization of HLW for disposal. The Salt Processing Project (SPP) is the salt waste (water-soluble) treatment portion of this effort. The overall SPP encompasses the selection, design, construction, and operation of technologies to prepare the salt-waste feed material for immobilization at the site's Saltstone Production Facility (SPF) and vitrification facility (Defense Waste Processing Facility [DWPF]). Major constituents that must be removed from the salt waste and sent as feed to DWPF include cesium (Cs), strontium (Sr), and actinides. In April 2000, the DOE Deputy Secretary for Project Completion (EM-40) established the SRS Salt Processing Project Technical Working Group (TWG) to manage technology development of treatment alternatives for SRS high-level salt wastes. The separation alternatives investigated included three candidate Cs-removal processes selected, as well as actinide and Sr removal that are also required as a part of each process. The candidate Cs-removal processes are: crystalline Silicotitanate Non-Elutable Ion Exchange (CST); caustic Side Solvent Extraction (CSSX); and small Tank Tetraphenylborate Precipitation (STTP). The Tanks Focus Area was asked to assist DOE by managing the SPP research and development (R&D), revising roadmaps, and developing down-selection criteria. The down-selection decision process focused its analysis on three levels: (a) identification of goals that the selected technology should achieve, (b) selection criteria that are a measure of performance of the goal, and (c) criteria scoring and weighting for each technology alternative. After identifying the goals and criteria, the TWG analyzed R&D results and engineering data and scored the technology alternatives versus the criteria. Based their analysis and scoring, the TWG recommended CSSX as the preferred alternative. This recommendation was formalized in July 2001 when DOE published the Savannah River Site Salt Processing Alternatives Final Supplemental Environmental Impact Statement (SEIS) and was finalized in the DOE Record of Decision issued in October 2001.

Lang, K.; Gerdes, K.; Picha, K.; Spader, W.; McCullough, J.; Reynolds, J.; Morin, J. P.; Harmon, H. D.

2002-02-26T23:59:59.000Z

212

Raspberry derived mesoporous carbon-tubules and fixed-bed adsorption of pharmaceutical drugs  

E-Print Network (OSTI)

Raspberry derived mesoporous carbon-tubules and fixed-bed adsorption of pharmaceutical drugs Shashi 210023, China c Laboratory of Green Chemistry, Lappeenranta University of Technology, Sammonkatu 12 Department, University of Florida, Gainesville, FL 32611-0290, USA 1. Introduction Pharmaceutical drugs (PD

Ma, Lena

213

Jefferson Lab Technology Transfer  

This site's design is only visible in a graphical browser that supports web standards, but its content is accessible to any browser. Concerns? Technology Transfer.

214

NREL: Technology Transfer - Technology Partnership Agreements  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Partnership Agreements Technology Partnership Agreements Through technology partnership agreements, NREL provides partners with technical support to help commercialize and deploy energy technologies and products. We do not fund any projects under a technology partnership agreement. The partner provides the necessary resources and covers our costs of providing technical services. NREL does provide funding opportunities through competitively placed contracts. For more information, see our business opportunities. Process The technology partnership agreement process basically includes 11 steps. See the NREL Technology Partnership Agreement Process flowchart. We are committed to working through these steps in a timely manner. Experience suggests that the fastest means to reach an agreement is through

215

Testing the Fixed Anvil Temperature Hypothesis in a Cloud-Resolving Model  

Science Conference Proceedings (OSTI)

Using cloud-resolving simulations of tropical radiativeconvective equilibrium, it is shown that the anvil temperature changes by less than 0.5 K with a 2-K change in SST, lending support to the fixed anvil temperature (FAT) hypothesis. The ...

Zhiming Kuang; Dennis L. Hartmann

2007-05-01T23:59:59.000Z

216

Building Technologies Office: Emerging Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Creating the Next Generation of Energy Efficient Technology Creating the Next Generation of Energy Efficient Technology The Emerging Technologies team partners with national laboratories, industry, and universities to advance research, development, and commercialization of energy efficient and cost effective building technologies. These partnerships help foster American ingenuity to develop cutting-edge technologies that have less than 5 years to market readiness, and contribute to the goal to reduce energy consumption by at least 50%. Sandia Cooler's innovative, compact design combines a fan and a finned metal heat sink into a single element, efficiently transferring heat in microelectronics and reducing energy use. Supporting Innovative Research to Help Reduce Energy Use and Advance Manufacturing Learn More

217

Protection Programming Defensive Planning for Fixed Facilities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NOT MEASUREMENT NOT MEASUREMENT SENSITIVE DOE STD-1207-2012 December 2012 DOE STANDARD Protection Program Defensive Planning For Fixed Facilities U.S. Department of Energy AREA SANS Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE STD-1207-2012 This Page Intentionally Left Blank ii DOE STD-1207-2012 TABLE OF CONTENTS FOREWORD..................................................................................................................................v PROTECTION PROGRAM DEFENSIVE PLANNING ..........................................................1 1. SCOPE............................................................................................................................ 1 2. PURPOSE. ..................................................................................................................... 1

218

Solar tracker motor having a fixed caliper and a translating caliper each with an electromagnetic brake system  

Science Conference Proceedings (OSTI)

Concepts and technologies described herein provide for an accurate and cost-effective method for rotating a solar array disk for tracking the movement of the sun. According to various aspects, a motor includes a fixed caliper and a translating caliper positioned adjacent to one another. Electromagnetically controlled brakes on the translating caliper grip the solar array disk while adjacent, but spaced apart, electromagnets on the fixed caliper and the translating caliper are energized to create an attractive force that pulls the translating caliper with the solar array disk toward the fixed caliper. After reaching the fixed caliper, brakes on the fixed caliper are engaged with the disk, brakes on the translating caliper are released from the disk, and the translating caliper is pushed back to the starting location where the process repeats until the desired rotation is completed.

Rau, Scott James

2013-01-29T23:59:59.000Z

219

Supporting technology for enhanced oil recovery: EOR thermal processes. Seventh Amendment and Extension to Annex 4, Enhanced oil recovery thermal processes  

SciTech Connect

This report contains the results of efforts under the six tasks of the Seventh Amendment and Extension of Annex IV, Enhanced Oil Recovery Thermal Processes of the Venezuela/USA Agreement. The report is presented in sections (for each of the 6 tasks) and each section contains one or more reports prepared by various individuals or groups describing the results of efforts under each of the tasks. A statement of each task, taken from the agreement, is presented on the first page of each section. The tasks are numbered 50 through 55. The first, second, third, fourth, fifth, sixth and seventh reports on Annex IV, Venezuela MEM/USA-DOE Fossil Energy Report IV-1, IV-2, IV-3, IV-4, IV-5 and IV-6 (DOE/BETC/SP-83/15, DOE/BC-84/6/SP, DOE/BC-86/2/SP, DOE/BC-87/2/SP, DOE/BC-89/l/SP, DOE/BC-90/l/SP, and DOE/BC-92/l/SP) contain the results for the first 49 tasks. Those reports are dated April 1983, August 1984, March 1986, July 1987, November 1988, December 1989, and October 1991, respectively. Each task report has been processed separately for inclusion in the Energy Science and Technology Database.

Reid, T.B. [USDOE Bartlesville Project Office, OK (United States); Colonomos, P. [INTEVEP, Filial de Petroleos de Venezuela, SA, Caracas (Venezuela)

1993-02-01T23:59:59.000Z

220

Grate assembly for fixed-bed coal gasifier  

DOE Patents (OSTI)

A grate assembly for a coal gasifier of a moving-bed or fixed-bed type is provided for crushing agglomerates of solid material such as clinkers, tailoring the radial distribution of reactant gases entering the gasification reaction zone, and control of the radial distribution of downwardly moving solid velocities in the gasification and combustion zone. The clinker crushing is provided by pinching clinkers between vertically oriented stationary bars and angled bars supported on the upper surface of a rotating conical grate. The distribution of the reactant gases is provided by the selective positioning of horizontally oriented passageways extending through the grate. The radial distribution of the solids is provided by mounting a vertically and generally radially extending scoop mechanism on the upper surface of the grate near the apex thereof.

Notestein, J.E.

1992-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "fixed support technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Grate assembly for fixed-bed coal gasifier  

SciTech Connect

A grate assembly for a coal gasifier of a moving-bed or fixed-bed type is provided for crushing agglomerates of solid material such as clinkers, tailoring the radial distribution of reactant gases entering the gasification reaction zone, and control of the radial distribution of downwardly moving solid velocities in the gasification and combustion zone. The clinker crushing is provided by pinching clinkers between vertically oriented stationary bars and angled bars supported on the upper surface of a rotating conical grate. The distribution of the reactant gases is provided by the selective positioning of horizontally oriented passageways extending through the grate. The radial distribution of the solids is provided by mounting a vertically and generally radially extending scoop mechanism on the upper surface of the grate near the apex thereof.

Notestein, John E. (Morgantown, WV)

1993-01-01T23:59:59.000Z

222

Contracts for field projects and supporting research on enhanced oil recovery: Progress review No. 52 quarter ending September 30, 1987  

Science Conference Proceedings (OSTI)

This progress review on enhanced oil recovery covers: Chemical Flooding /emdash/ Supporting Research; Gas Displacement /emdash/ Supporting Research; Thermal Recovery /emdash/ Supporting Research; Resource Assessment Technology; Geoscience Technology; Environmental Technology; Microbial Technology.

Not Available

1988-07-01T23:59:59.000Z

223

Technology Transfer: Available Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Materials Biofuels Biofuels Biotechnology and Medecine Biotechnology & Medicine Chemistry Developing World Energy Efficient Technologies Energy Environmental Technologies...

224

NFRC Support  

NLE Websites -- All DOE Office Websites (Extended Search)

NFRC Technical Support Founded in 1989, the National Fenestration Rating Council (NFRC) is a non-profit, publicprivate partnership which develops and administers a fair, accurate,...

225

Technology support for initiation of high-throughput processing of thin-film CdTe PV modules. Phase 1 technical report, March 14, 1995--March 13, 1996  

DOE Green Energy (OSTI)

Progress has been made in the important areas of stability, advanced deposition techniques, efficiency, the back contact, no-contact film diagnostics (photoluminescence) and Cd waste control. The progress in stability has been in both the demonstration of devices maintaining at least 90% of the initial efficiency for over 19,000 hours of continuous light soak and the development of methods which can accurately predict long term behavior based on the first 5,000--10,000 hours of life. Experiments were conducted to determine if device behavior could be accelerated with thermal or voltage stresses. Notable achievements in deposition technology include depositing CdTe on a 3,600 cm{sup 2} substrate at 600 torr and designing and fabricating a new deposition feed system with a remote semiconductor source. The efficiency has been increased on small area devices to 13.3% by decreasing the thickness of the CdS and of the glass substrate. Work also focused on using a high resistivity SnO{sub 2} buffer layer between the TCO and thin CdS to help preserve the open-circuit voltage while increasing the current-density. The back contacting process has been simplified by replacing the wet post-deposition etch with a vapor Te deposition step on small area devices. Results show that the devices perform comparably in efficiency but better in stability under light-soaking and open-circuit conditions. Preliminary studies of the correlation between CdS photoluminescence after the chloride treatment and the final device efficiency have shown a positive correlation which may be applicable for in-line quality control. The final area of progress was through the successful demonstration of preventing at least 99.9% of all incoming Cd from leaving in an uncontrolled manner through the land, air or water.

Sasala, R.; Powell, R.; Dorer, G. [Solar Cells, Inc., Toledo, OH (United States)

1996-06-01T23:59:59.000Z

226

Pretreatment Technology Plan  

SciTech Connect

This technology plan presents a strategy for the identification, evaluation, and development of technologies for the pretreatment of radioactive wastes stored in underground storage tanks at the Hanford Site. This strategy includes deployment of facilities and process development schedules to support the other program elements. This document also presents schedule information for alternative pretreatment systems: (1) the reference pretreatment technology development system, (2) an enhanced pretreatment technology development system, and (3) alternative pretreatment technology development systems.

Barker, S.A. [Westinghouse Hanford Co., Richland, WA (US); Thornhill, C.K.; Holton, L.K. Jr. [Pacific Northwest Lab., Richland, WA (US)

1993-03-01T23:59:59.000Z

227

Fixed Monthly Living Expense Payments at the Lawrence Livermore National Laboratory, INS-L-11-05  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fixed Monthly Living Expense Fixed Monthly Living Expense Payments at the Lawrence Livermore National Laboratory INS-L-11-05 September 2011 Department of Energy Washington, DC 20585 September 21, 2011 MEMORANDUM FOR MANAGER, LIVERMORE SITE OFFICE FROM: Sandra D. Bruce Assistant Inspector General for Inspections SUBJECT: INFORMATION: Inspection Report on "Fixed Monthly Living Expense Payments at the Lawrence Livermore National Laboratory" BACKGROUND The Lawrence Livermore National Laboratory (Livermore) is a Department of Energy (Department) laboratory managed and operated by Lawrence Livermore National Security, LLC, for the Department's National Nuclear Security Administration (NNSA). Livermore's mission is to ensure the safety and security of the nation through applied science and technology in key

228

FIXED-PRICE CONTRACTING FOR DEPARTMENT OF ENERGY CLEANUP ACTIVITIES...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FIXED-PRICE CONTRACTING FOR DEPARTMENT OF ENERGY CLEANUP ACTIVITIES, CR-B-02-01 FIXED-PRICE CONTRACTING FOR DEPARTMENT OF ENERGY CLEANUP ACTIVITIES, CR-B-02-01 As part of its...

229

Supporting Statement:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Supporting Statement: Supporting Statement: OE Recovery Act Financial Assistance Grants OMB Control Number 1910-5149 This supporting statement provides additional information regarding the Department of Energy (DOE) request for processing of the renewal of the proposed information collection, OE Recovery Act Financial Assistance Grants. The numbered questions correspond to the order shown on the Office of Management and Budget (OMB) Form 83-I, "Instructions for Completing OMB Form 83-I." 1. Explain the circumstances that make the collection of information necessary. The Department of Energy (DOE) requires collection of information for Recovery Act Smart Grid grants. Sections 1304 and 1306 of the Energy Independence and Security Act

230

Pipe support  

DOE Patents (OSTI)

A pipe support for high temperature, thin-walled piping runs such as those used in nuclear systems. A section of the pipe to be supported is encircled by a tubular inner member comprised of two walls with an annular space therebetween. Compacted load-bearing thermal insulation is encapsulated within the annular space, and the inner member is clamped to the pipe by a constant clamping force split-ring clamp. The clamp may be connected to pipe hangers which provide desired support for the pipe.

Pollono, Louis P. (Hempfield Township, Hempfield County, PA)

1979-01-01T23:59:59.000Z

231

Supporting technology for enhanced recovery, Annex V: evaluate application of recently developed techniques in the areas of drilling, coring, and telemetry. Venezuela-MEM/USA-DOE fossil-energy report V-1  

Science Conference Proceedings (OSTI)

The Agreement between the United States and Venezuela was designed to further energy research and development in six areas. This report focuses on Annex V - Drilling, Coring, and Telemetry as supporting technology for enhanced oil recovery projects in the United States and Venezuela. Annex V consists of 18 tasks to perform these three projects. This report completes the work for Annex V. Energy research and development in the area of Enhanced Oil Recovery has as its goal the more efficient and complete production of the third crop of oil. Methods and techniques must be developed to assist in the implementation of EOR projects. Technology development that reduces costs and provides better reservoir information often has a direct impact on the economic viability of EOR projects and Annex V addresses these areas. Each of the three areas covered by Annex V are separate entities and are presented in this report as different sections. Each has its own Abstract. The drilling and coring tests were highly successful but only a limited amount of work was necessary in the Telemetry area because a field test was not feasible.

Williams, C.R.; Lichaa, P.; Van Domselaar, H.

1983-04-01T23:59:59.000Z

232

In celebration of the fixed target program with the Tevatron  

Science Conference Proceedings (OSTI)

The Tevatron is the world's first large superconducting accelerator. With its construction, we gained the dual opportunities to advance the state of the art in accelerator technology with the machine itself and in particle physics with the experiments that became possible in a higher energy regime. There have been 43 experiments in the Tevatron fixed target program. Many of these are better described as experimental programs, each with a broad range of physics goals and results, and more than 100 collaborating physicists and engineers. The results of this program are three-fold: (1) new technologies in accelerators, beams and detectors which advanced the state of the art; (2) new experimental results published in the refereed physics journals; and (3) newly trained scientists who are both the next generation of particle physicists and an important part of the scientific, technical and educational backbone of the country as a whole. In this book they compile these results. There are sections from each experiment including what their physics goals and results were, what papers were published, and which students have received degrees. Summaries of these results from the program as a whole are quite interesting, but the physics results from this program are too broad to summarize globally. The most important of the results appear in later sections of this booklet.

Jeffrey A. Appel et al.

2001-12-28T23:59:59.000Z

233

Fixed and Random Effects in Nonlinear Models  

E-Print Network (OSTI)

This paper surveys recently developed approaches to analyzing panel data with nonlinear models. We summarize a number of results on estimation of fixed and random effects models in nonlinear modeling frameworks such as discrete choice, count data, duration, censored data, sample selection, stochastic frontier and, generally, models that are nonlinear both in parameters and variables. We show that notwithstanding their methodological shortcomings, fixed effects are much more practical than heretofore reflected in the literature. For random effects models, we develop an extension of a random parameters model that has been used extensively, but only in the discrete choice literature. This model subsumes the random effects model, but is far more flexible and general, and overcomes some of the familiar shortcomings of the simple additive random effects model as usually formulated. Once again, the range of applications is extended beyond the familiar discrete choice setting. Finally, we draw together several strands of applications of a model that has taken a semiparametric approach to individual heterogeneity in panel data, the latent class model. A fairly straightforward extension is suggested that should make this more widely useable by practitioners. Many of the underlying results already appear in the literature, but, once again, the range of applications is smaller than it could be.

William Greene

2001-01-01T23:59:59.000Z

234

The need for a new approach to regulating fixed networks  

Science Conference Proceedings (OSTI)

The increasing danger of excess capacity in the regulated fixed networks calls into question the established long-standing pricing standards for wholesale services based on forward-looking long-run incremental costs (FL-LRAIC). Within the EU ''Regulatory ... Keywords: Capacity-based charges, Excess capacity, Fixed-network regulation, Fixed-to-mobile substitution, Retail minus

Wolfgang Briglauer; Ingo Vogelsang

2011-03-01T23:59:59.000Z

235

ORISE: Operations Support and Planning  

NLE Websites -- All DOE Office Websites (Extended Search)

Securing the Golden State Amber Waves 2012 Bureau of Reclamation Emergency Management Issues Special Interest Group Golden Guardian Joint Information Center Preventing Nuclear Smuggling Program Training and Technology Support Resources How to Work With Us Contact Us Oak Ridge Institute for Science Education Operations Support and Planning Operations Support and Planning The Oak Ridge Institute for Science and Education (ORISE) provides operations and planning support to the U.S. Department of Energy (DOE), Federal Emergency Management Agency and other government agencies for their counterterrorism and emergency response readiness programs. ORISE's planning, logistical and administrative support areas are focused on enhancing the radiological preparedness and response coordination

236

Interactive visual supports for children with autism  

Science Conference Proceedings (OSTI)

Interventions to support children with autism often include the use of visual supports, which are cognitive tools to enable learning and the production of language. Although visual supports are effective in helping to diminish many of the challenges ... Keywords: Assistive technology, Autism, Capture and access, Education, Visual supports

Gillian R. Hayes; Sen Hirano; Gabriela Marcu; Mohamad Monibi; David H. Nguyen; Michael Yeganyan

2010-10-01T23:59:59.000Z

237

ENGINEERING TECHNOLOGY Engineering Technology  

E-Print Network (OSTI)

, Mechatronics Technology, and Renewable Energy Technology. Career Opportunities Graduates of four origin, gender, age, marital status, sexual orientation, status as a Vietnam-era veteran, or disability

238

Technology Transfer: Available Technologies  

Please refer to the list of technologies below for licensing and research collaboration availability. If you can't find the technology you ...

239

Fixed Points for Stochastic Open Chemical Systems  

E-Print Network (OSTI)

In the first part of this paper we give a short review of the hierarchy of stochastic models, related to physical chemistry. In the basement of this hierarchy there are two models --- stochastic chemical kinetics and the Kac model for Boltzman equation. Classical chemical kinetics and chemical thermodynamics are obtained as some scaling limits in the models, introduced below. In the second part of this paper we specify some simple class of open chemical reaction systems, where one can still prove the existence of attracting fixed points. For example, Michaelis\\tire Menten kinetics belongs to this class. At the end we present a simplest possible model of the biological network. It is a network of networks (of closed chemical reaction systems, called compartments), so that the only source of nonreversibility is the matter exchange (transport) with the environment and between the compartments. Keywords: chemical kinetics, chemical thermodynamics, Kac model, mathematical biology

Malyshev, V A

2011-01-01T23:59:59.000Z

240

Fixed Points for Stochastic Open Chemical Systems  

E-Print Network (OSTI)

In the first part of this paper we give a short review of the hierarchy of stochastic models, related to physical chemistry. In the basement of this hierarchy there are two models --- stochastic chemical kinetics and the Kac model for Boltzman equation. Classical chemical kinetics and chemical thermodynamics are obtained as some scaling limits in the models, introduced below. In the second part of this paper we specify some simple class of open chemical reaction systems, where one can still prove the existence of attracting fixed points. For example, Michaelis\\tire Menten kinetics belongs to this class. At the end we present a simplest possible model of the biological network. It is a network of networks (of closed chemical reaction systems, called compartments), so that the only source of nonreversibility is the matter exchange (transport) with the environment and between the compartments. Keywords: chemical kinetics, chemical thermodynamics, Kac model, mathematical biology

V. A. Malyshev

2011-12-16T23:59:59.000Z

Note: This page contains sample records for the topic "fixed support technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Building Technologies Office: Innovative Energy Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Heating (WMV 49 MB) Heat Pump Water Heater Technology (WMV 12 MB) HVAC Technologies Residential Air Conditioning Fault Detection and Diagnostics (FDD) and Programs to Support...

242

NREL: Technology Transfer - News Release Archives  

Solar Technology Acceleration Center is Powering Up . Members of the Solar Technology Acceleration Center (SolarTAC) and supporters convened in ...

243

National Technology Enterprises Co | Open Energy Information  

Open Energy Info (EERE)

National Technology Enterprises Co Jump to: navigation, search Name National Technology Enterprises Co Place Kuwait Sector Services Product Services & Support (Clean Energy) (...

244

SUPPORT STRUCTURE  

DOE Patents (OSTI)

The core support structure for fuel elements of a fast reactor is described. The support structure comprises a nest of tubes of alternately long and short length in longitudinally parallel relationship and arranged in a symmetrical hexagonal lattice. Each tube has a hexagonal section of flat contact faces disposed intermediate its ends and at points wherein tube pairs are engaged in face to face contact. One of each pair of adjacent tubes is slotted to receive the intersecting portion of the other tube of the pair, the intersecting portion bearing against the fuel element contained in the slotted tube for locating the element therein. (AEC)

Tatlock, J.; Glass, J.A.F.

1962-08-14T23:59:59.000Z

245

Site Support Contractor Solicitation - Information Technology and  

NLE Websites -- All DOE Office Websites (Extended Search)

Site Security Services - DE-SOL-0003339 Site Security Services - DE-SOL-0003339 Solicitation DE-SOL-0003339 -The Site Security Services solicitation (DE-SOL-0003339) resulted in the award of Contract DE-FE0010809 to Action Facilities Mangement, Incorporated. The electronic reading room is part of NETL's strategy to provide information that may benefit potential offerors in preparing their proposal. The information is provided to assist the reader in gaining an enhanced understanding of the requirement. NETL has completed the Market Research related to performing the Site Security Services requirement. Based on the Market Research and the received concurrence from the Small Business Administration (SBA) it has been determined to fulfill this requirement through a competitive 8(a) small business set-aside. A solicitation will be issued to eligible 8(a)

246

Supporting the Technology The Vision Transfer Mission  

One of the Community Reuse Organization of East Tennessees family of companies For more information on potential collaborations with ORNL, contact Tom Rogers

247

Systems Analysis Supporting the Carbon Sequestration Technology...  

NLE Websites -- All DOE Office Websites (Extended Search)

7.6 0 2 4 6 8 10 ckWh No Capture Current Advanced GOAL 10% Increase in COE * Capital Cost Decrease * Steam Stripping Efficiency * LoadingUnloading Efficiency * Improved...

248

Contracts for field projects and supporting research on enhanced oil recovery  

SciTech Connect

Progress reports are presented for field tests and supporting research for the following: chemical flooding, gas displacement; thermal methods; resource assessment technology; environmental technology and microbial technology.

Not Available

1987-04-01T23:59:59.000Z

249

ATS materials support  

SciTech Connect

The technology based portion of the Advanced Turbine System Program (ATS) contains several subelements which address generic technology issues for land-base gas turbine systems. One subelement is the Materials/Manufacturing Technology Program which is coordinated by DOE-Oak Ridge Operations and Oak Ridge National laboratory (ORNL) for the Department of Energy. The work in this subelement is being performed predominantly by industry with assistance from national laboratories and universities. Projects in this subelement are aimed toward hastening the incorporation of new materials and components in gas turbines. The materials manufacturing subelement was developed with input from gas turbine manufacturers, material suppliers, government laboratories and universities. Work is currently ongoing on thermal barrier coatings (TBCs), the scale-up of single-crystal airfoil manufacturing technologies, materials characterization and technology information exchange. Westinghouse Power Generation and Pratt and Whitney each have material programs to develop dependable TBCs that enable increased turbine inlet temperatures while maintaining airfoil substrate temperatures at levels to meet the ATS life goals. Howmet and PCC Airfoils each have projects to extend the capability of single-crystal complex-cored airfoil technology to larger sizes so that higher turbine inlet temperatures can be attained in land-based turbines in a cost-effective manner. Materials characterization tasks are ongoing on TBCs in support of the industrial projects. In addition, a project on long-term testing of ceramics and ceramic-matrix composites for gas turbines is being conducted in support of programs at Solar Turbines, Allison Engines, and Westinghouse Power Generation.

Karnitz, M.A.; Wright, I.G.; Ferber, M.K.; Holcomb, R.S. [Oak Ridge National Lab., TN (United States); Rawlins, M.H. [Dept. of Energy, Oak Ridge, TN (United States)

1996-12-31T23:59:59.000Z

250

Arch supports  

NLE Websites -- All DOE Office Websites (Extended Search)

Arch supports Arch supports Name: Tu Age: N/A Location: N/A Country: N/A Date: N/A Question: My question is about the foot. Actually, it's not really on the chemistry of the human body. I have flat feet and I need to wear an orthopedic, otherwise know as an arch support in my shoe. What it does is elevate and support the arch of my foot. Here is my scenario question. The orthopedic is very rigid and has a spring constant much higher than the rest of my foot. As a result, at high pressures, my foot will first absorb some of the force. At higher forces and as my foot had absorbed some of the force, the orthopedic begins to play a greater role. It's much stiffer. Thus a greater proportion of force is placed on my arches than on a person's arches who is not flat footed at high forces. Ideally then, an orthopedic would have the same spring constant as a natural arch and/or the foot. Is this the case of the use of an orthopedic?

251

Vehicle Technologies Office: Ambassadors  

NLE Websites -- All DOE Office Websites (Extended Search)

Ambassadors to someone Ambassadors to someone by E-mail Share Vehicle Technologies Office: Ambassadors on Facebook Tweet about Vehicle Technologies Office: Ambassadors on Twitter Bookmark Vehicle Technologies Office: Ambassadors on Google Bookmark Vehicle Technologies Office: Ambassadors on Delicious Rank Vehicle Technologies Office: Ambassadors on Digg Find More places to share Vehicle Technologies Office: Ambassadors on AddThis.com... Goals Research & Development Testing and Analysis Workplace Charging Partners Ambassadors Resources Community and Fleet Readiness Workforce Development Plug-in Electric Vehicle Basics Ambassadors Workplace Charging Challenge Clean Cities Coalitions Clean Cities logo. Clean Cities National: A network of nearly 100 Clean Cities coalitions, supported by the

252

MHK Technologies/The Davis Hydro Turbine | Open Energy Information  

Open Energy Info (EERE)

Hydro Turbine Hydro Turbine < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage The Davis Hydro Turbine.jpg Technology Profile Primary Organization Blue Energy Technology Resource Click here Current Technology Type Click here Cross Flow Turbine Technology Readiness Level Click here TRL 1 3 Discovery Concept Def Early Stage Dev Design Engineering Technology Description The Blue Energy Ocean Turbine acts as a highly efficient underwater vertical axis windmill Four fixed hydrofoil blades of the turbine are connected to a rotor that drives an integrated gearbox and electrical generator assembly The turbine is mounted in a durable concrete marine caisson that anchors the unit to the ocean floor and the structure directs flow through the turbine further concentrating the resource supporting the coupler gearbox and generator above the rotor These sit above the surface of the water and are readily accessible for maintenance and repair The hydrofoil blades employ a hydrodynamic lift principal that causes the turbine foils to move proportionately faster than the speed of the surrounding water Computer optimized cross flow design ensures that the rotation of the turbine is unidirectional on both the ebb and flow of the tide

253

Pressurizer tank upper support  

DOE Patents (OSTI)

A pressurizer tank in a pressurized water nuclear reactor is mounted between structural walls of the reactor on a substructure of the reactor, the tank extending upwardly from the substructure. For bearing lateral loads such as seismic shocks, a girder substantially encircles the pressurizer tank at a space above the substructure and is coupled to the structural walls via opposed sway struts. Each sway strut is attached at one end to the girder and at an opposite end to one of the structural walls, and the sway struts are oriented substantially horizontally in pairs aligned substantially along tangents to the wall of the circular tank. Preferably, eight sway struts attach to the girder at 90[degree] intervals. A compartment encloses the pressurizer tank and forms the structural wall. The sway struts attach to corners of the compartment for maximum stiffness and load bearing capacity. A valve support frame carrying the relief/discharge piping and valves of an automatic depressurization arrangement is fixed to the girder, whereby lateral loads on the relief/discharge piping are coupled directly to the compartment rather than through any portion of the pressurizer tank. Thermal insulation for the valve support frame prevents thermal loading of the piping and valves. The girder is shimmed to define a gap for reducing thermal transfer, and the girder is free to move vertically relative to the compartment walls, for accommodating dimensional variation of the pressurizer tank with changes in temperature and pressure. 10 figures.

Baker, T.H.; Ott, H.L.

1994-01-11T23:59:59.000Z

254

Pressurizer tank upper support  

DOE Patents (OSTI)

A pressurizer tank in a pressurized water nuclear reactor is mounted between structural walls of the reactor on a substructure of the reactor, the tank extending upwardly from the substructure. For bearing lateral loads such as seismic shocks, a girder substantially encircles the pressurizer tank at a space above the substructure and is coupled to the structural walls via opposed sway struts. Each sway strut is attached at one end to the girder and at an opposite end to one of the structural walls, and the sway struts are oriented substantially horizontally in pairs aligned substantially along tangents to the wall of the circular tank. Preferably, eight sway struts attach to the girder at 90.degree. intervals. A compartment encloses the pressurizer tank and forms the structural wall. The sway struts attach to corners of the compartment for maximum stiffness and load bearing capacity. A valve support frame carrying the relief/discharge piping and valves of an automatic depressurization arrangement is fixed to the girder, whereby lateral loads on the relief/discharge piping are coupled directly to the compartment rather than through any portion of the pressurizer tank. Thermal insulation for the valve support frame prevents thermal loading of the piping and valves. The girder is shimmed to define a gap for reducing thermal transfer, and the girder is free to move vertically relative to the compartment walls, for accommodating dimensional variation of the pressurizer tank with changes in temperature and pressure.

Baker, Tod H. (O' Hara Township, Allegheny County, PA); Ott, Howard L. (Kiski Township, Armstrong County, PA)

1994-01-01T23:59:59.000Z

255

EVOLUTIONARY AND GEOLOGIC CONSEQUENCES OF ORGANIC CARBON FIXING IN THE PRIMITIVE ANOXIC OCEAN  

E-Print Network (OSTI)

photosynthesis primary carbon dioxide-fixing mechanism.trophic bacteria to fix carbon dioxide. These bacteria toas the primary energy fix carbon dioxide. The free source to

Berry, W.B.N.

2013-01-01T23:59:59.000Z

256

Apparatus for fixed bed coal gasification  

DOE Patents (OSTI)

An apparatus for fixed-bed coal gasification is described in which coal such as caking coal is continuously pyrolyzed with clump formation inhibited, by combining the coal with a combustible gas and an oxidant, and then continually feeding the pyrolyzed coal under pressure and elevated temperature into the gasification region of a pressure vessel. The materials in the pressure vessel are allowed to react with the gasifying agents in order to allow the carbon contents of the pyrolyzed coal to be completely oxidized. The combustion of gas produced from the combination of coal pyrolysis and gasification involves combining a combustible gas coal and an oxidant in a pyrolysis chamber and heating the components to a temperature of at least 1600.degree. F. The products of coal pyrolysis are dispersed from the pyrolyzer directly into the high temperature gasification region of a pressure vessel. Steam and air needed for gasification are introduced in the pressure vessel and the materials exiting the pyrolyzer flow down through the pressure vessel by gravity with sufficient residence time to allow any carbon to form carbon monoxide. Gas produced from these reactions are then released from the pressure vessel and ash is disposed of.

Sadowski, Richard S. (Greenville, SC)

1992-01-01T23:59:59.000Z

257

Contracts for field projects and supporting research on enhanced oil recovery: Progress review No. 48, Quarter ending September 30, 1986  

SciTech Connect

Progress reports are presented for: (1) chemical flooding (field projects and supporting research); (2) gas displacement (supporting research); (3) thermal methods (supporting research); (4) resource assessment technology; (5) environmental technology; and (5) microbial technology.

Not Available

1987-09-01T23:59:59.000Z

258

Contracts for field projects and supporting research on enhanced oil recovery: Progress review No. 68, quarter ending September 30, 1991  

Science Conference Proceedings (OSTI)

Progress reports are presented for the following tasks: chemical flooding-supporting research; gas displacement-supporting research; thermal recovery-supporting research; geoscience technology; resource assessment technology; and microbial technology. A list of available publications is also included.

Not Available

1992-11-01T23:59:59.000Z

259

Contracts for field projects and supporting research on enhanced oil recovery: Progress review No. 51 quarter ending June 30, 1987  

Science Conference Proceedings (OSTI)

This Progress review on enhanced oil recovery covers: Chemical Flooding /emdash/ Field Projects; Chemical Flooding /emdash/ Supporting Research; Gas Displacement /emdash/ Supporting Research; Thermal Recovery /emdash/ Supporting Research; Resource Assessment Technology; Geoscience; Environmental Technology; Microbial Technology.

Not Available

1988-05-01T23:59:59.000Z

260

RELIABILITY BASED DESIGN OF FIXED FOUNDATION WIND TURBINES  

SciTech Connect

Recent analysis of offshore wind turbine foundations using both applicable API and IEC standards show that the total load demand from wind and waves is greatest in wave driven storms. Further, analysis of overturning moment loads (OTM) reveal that impact forces exerted by breaking waves are the largest contributor to OTM in big storms at wind speeds above the operating range of 25 m/s. Currently, no codes or standards for offshore wind power generators have been adopted by the Bureau of Ocean Energy Management Regulation and Enforcement (BOEMRE) for use on the Outer Continental Shelf (OCS). Current design methods based on allowable stress design (ASD) incorporate the uncertainty in the variation of loads transferred to the foundation and geotechnical capacity of the soil and rock to support the loads is incorporated into a factor of safety. Sources of uncertainty include spatial and temporal variation of engineering properties, reliability of property measurements applicability and sufficiency of sampling and testing methods, modeling errors, and variability of estimated load predictions. In ASD these sources of variability are generally given qualitative rather than quantitative consideration. The IEC 61400‐3 design standard for offshore wind turbines is based on ASD methods. Load and resistance factor design (LRFD) methods are being increasingly used in the design of structures. Uncertainties such as those listed above can be included quantitatively into the LRFD process. In LRFD load factors and resistance factors are statistically based. This type of analysis recognizes that there is always some probability of failure and enables the probability of failure to be quantified. This paper presents an integrated approach consisting of field observations and numerical simulation to establish the distribution of loads from breaking waves to support the LRFD of fixed offshore foundations.

Nichols, R.

2013-10-14T23:59:59.000Z

Note: This page contains sample records for the topic "fixed support technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

MHK Technologies/SPERBOY | Open Energy Information  

Open Energy Info (EERE)

SPERBOY SPERBOY < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage SPERBOY.jpg Technology Profile Primary Organization Embley Energy Project(s) where this technology is utilized *MHK Projects/Plymouth Sound Technology Resource Click here Wave Technology Type Click here Oscillating Water Column Technology Readiness Level Click here TRL 5/6: System Integration and Technology Laboratory Demonstration Technology Description SPERBOY is a floating buoy Oscillating Water Column (OWC) device consisting of a buoyant structure with a submerged, enclosed column. Housed above the OWC on top of the buoy is the plant: turbines, generators and associated system facilities. The principle of operation is similar to that of fixed OWCs designed for shoreline and fixed installations, except that the device is capable of deployment in deep water to maximize greatest energy source; and the entire body floats and maintains optimum hydrodynamic interactions for the prevailing wave spectrum, producing high energy capture at minimal cost.

262

Technology Administration Budget Summary FY 2002-FY ...  

Science Conference Proceedings (OSTI)

... Advanced Technology Program (ATP). ... act: $1,000 for measurement support to combat chemcial, biological, radiological, nuclear, explosive threats ...

2010-10-05T23:59:59.000Z

263

Technology Search  

home \\ technologies \\ search. Technologies: Ready-to-Sign Licenses: Software: Patents: Technology Search. ... Operated by Lawrence Livermore National Security, LLC, ...

264

REQUESTS FOR PAYMENTS UNDER FIRM-FIXED PRICE CONSTRUCTION CONTRACTS  

REQUESTS FOR PAYMENTS UNDER FIRM-FIXED PRICE CONSTRUCTION CONTRACTS Author: wshelto Last modified by: wshelto Created Date: 2/28/2008 3:26:00 PM Company:

265

Development of the fixed-vane revolving vane compressor.  

E-Print Network (OSTI)

??The dissertation deals with the development of a newly introduced positive displacement rotary compressor, named fixed-vane revolving vane compressor. The compressor design is conceived with (more)

Tan, Kok Ming.

2012-01-01T23:59:59.000Z

266

NBS Mono115: Lab-Fixed Components of Elec. Dipole ...  

Science Conference Proceedings (OSTI)

3.1. Laboratory-Fixed Components of the Electric Dipole Moment Operator ?. ... 2.9) to the overall parity selection rule for electric dipole transitions . ...

267

NIST / ITS-90 Fixed-Point Cell Mini-Workshop  

Science Conference Proceedings (OSTI)

Page 1. NIST / ITS-90 Fixed-Point Cell Mini-Workshop NIST, Building 221, Room B005, Gaithersburg, MD 20899 November ...

2013-08-12T23:59:59.000Z

268

SF6432-FP (02-01-12) Firm Fixed Price  

NLE Websites -- All DOE Office Websites (Extended Search)

SF 6432-FP (072013) Section II STANDARD TERMS AND CONDITIONS FOR FIRM-FIXED PRICE CONTRACTS THE FOLLOWING CLAUSES APPLY TO THIS CONTRACT AS INDICATED UNLESS...

269

Technology@TMS: Online Article  

Science Conference Proceedings (OSTI)

... supported by the U.S. National Science Foundation through the Information Technology Research (ITR) program.2 The infrastructure among the key materials...

270

Information Technology | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Information Technology Support Search Button About Welcome Overview Visiting the APS Mission & Goals Find People Organization Charts Committees Job Openings User Information...

271

EERE Fuel Cell Technologies Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Results will be documented in a report by Pacific Northwest National Lab: "Pathways to Commercial Success: Technologies and Products Supported by the Hydrogen, Fuel Cells and...

272

Information Technology | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Photon Source Information Technology Support Search APS ... Search Button About User Information News & Events Science & Education Beamlines Divisions Argonne Home >...

273

Fuel Cell Technologies Office: Education  

NLE Websites -- All DOE Office Websites (Extended Search)

Fuel Cell Technologies Office - Education Students learn about solar energy. DOE supports demonstrations and commercialization by providing technically accurate and objective...

274

Building Technologies Office: Emerging Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Emerging Technologies Emerging Technologies Printable Version Share this resource Send a link to Building Technologies Office: Emerging Technologies to someone by E-mail Share Building Technologies Office: Emerging Technologies on Facebook Tweet about Building Technologies Office: Emerging Technologies on Twitter Bookmark Building Technologies Office: Emerging Technologies on Google Bookmark Building Technologies Office: Emerging Technologies on Delicious Rank Building Technologies Office: Emerging Technologies on Digg Find More places to share Building Technologies Office: Emerging Technologies on AddThis.com... About Take Action to Save Energy Partner with DOE Activities Technology Research, Standards, & Codes Popular Links Success Stories Previous Next Lighten Energy Loads with System Design.

275

Contracts for field projects and supporting research on enhanced oil recovery  

SciTech Connect

Progress reports are presented for the following tasks: chemical flooding-supporting research; gas displacement-supporting research; thermal recovery-supporting research; geoscience technology; resource assessment technology; microbial technology; environmental technology; and novel technology. A list of available publications is also included.

Not Available

1992-07-01T23:59:59.000Z

276

04_fall_CCToday_AAs_fixed.pmd  

NLE Websites -- All DOE Office Websites (Extended Search)

Wabash Coal-Fired Fuel Cell Wabash Coal-Fired Fuel Cell ...... 1 News Bytes .................................... 1 Hydrates Capture CO 2 ................... 3 Controlling Zebra Mussels ............ 4 Upcoming Events ........................... 5 Mercury Speciation Data ............... 6 Advanced Membranes ................... 7 Internship Program ......................... 9 International Initiatives ................ 10 Status Report ............................... 14 A NEWSLETTER ABOUT INNOVATIVE TECHNOLOGIES FOR COAL UTILIZATION NEWS BYTES OFFICE OF FOSSIL ENERGY, U.S. DEPARTMENT OF ENERGY * DOE/FE-0476* ISSUE NO. 59, FALL 2004 See "News Bytes" on page 9... See "Wabash" on page 2 ... WORLD'S LARGEST CLEAN COAL-POWERED FUEL CELL A FuelCell Energy, Inc. (FCE) 2-megawatt (MW) carbonate fuel cell -

277

Contracts for field projects and supporting research on enhanced oil recovery  

SciTech Connect

Progress reports are presented for the following tasks: chemical flooding supporting research; gas displacement supporting research; thermal recovery supporting research; geoscience technology; resource assessment; and microbial technology. A list of available publications is also included.

Not Available

1993-02-01T23:59:59.000Z

278

Automatic tropical cyclone eye fix using genetic algorithm  

Science Conference Proceedings (OSTI)

Tropical cyclones (TCs) are weather systems with vast destructive power. To forecast TC tracks, forecasters need to locate their circulation centers, or eyes. This eye fix process is often done manually in practice. Since subjective elements are involved ... Keywords: Genetic algorithm, Meteorological computing, Tropical cyclone eye fix, Weather forecasting, Weather system modeling

Ka Yan Wong; Chi Lap Yip; Ping Wah Li

2008-01-01T23:59:59.000Z

279

Computer supported collaborative design: Retrospective and perspective  

Science Conference Proceedings (OSTI)

Industry today requires new technologies to address increasingly complex product development and the high expectations of customers. Computer Supported Collaborative Design (CSCD) emerged in response to this requirement. With the rapid advancement of ... Keywords: Agents, Collaborative engineering, Computer supported collaborative design, Computer supported cooperative work, Concurrent engineering

Weiming Shen; Qi Hao; Weidong Li

2008-12-01T23:59:59.000Z

280

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Molding, Thermoforming & Compounding Molding, Thermoforming & Compounding PDF format (89 kb) The Manufacturing Science & Technology Center helps customers choose the best materials and techniques for their product by providing a variety of conformal coatings, thermoforming, and compounding materials using established or custom designed processes. The department provides consulting services for injection molding and rubber compounding projects. Capabilities: Thermoforming: Processing thermoplastics such as polycarbonate, polymethyl methacrylate, polypropylene polystyrene, and ABS; producing holding trays, protective caps, and custom covers Injection Molding Consultation: Designing your part to be injection molded, helping you choose the best material for your application, and supporting your interface with injection molding companies

Note: This page contains sample records for the topic "fixed support technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Graphite technology development plan  

Science Conference Proceedings (OSTI)

This document presents the plan for the graphite technology development required to support the design of the 350 MW(t) Modular HTGR within the US National Gas-Cooled Reactor Program. Besides descriptions of the required technology development, cost estimates, and schedules, the plan also includes the associated design functions and design requirements.

NONE

1986-07-01T23:59:59.000Z

282

Fixed Capital Investment Tax Credit (Connecticut) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fixed Capital Investment Tax Credit (Connecticut) Fixed Capital Investment Tax Credit (Connecticut) Fixed Capital Investment Tax Credit (Connecticut) < Back Eligibility Commercial Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State Connecticut Program Type Corporate Tax Incentive Provider Connecticut Department of Economic and Community Development The Fixed Capital Investment Tax Credit allows a tax credit of 5% of the amount paid for any new fixed capital investment. Companies with fewer than 800 full-time employees may take a tax credit for machinery and equipment purchased and installed in a facility. The credit is based on a percentage of the amount spent on machinery that exceeds the amount spend on machinery

283

Technology Capabilities  

NLE Websites -- All DOE Office Websites (Extended Search)

Homeland Security & Defense Homeland Security & Defense Information Technology & Communications Information Technology & Communications Sensors, Electronics &...

284

Power conversion technologies  

DOE Green Energy (OSTI)

The Power Conservation Technologies thrust area supports initiatives that enhance the core competencies of the Lawrence Livermore National Laboratory (LLNL) Engineering Directorate in the area of solid-state power electronics. Through partnerships with LLNL programs, projects focus on the development of enabling technologies for existing and emerging programs that have unique power conversion requirements. This year, a multi-disciplinary effort was supported which demonstrated solid-state, high voltage generation by using a dense, monolithic photovoltaic array. This effort builds upon Engineering's strengths in the core technology areas of power conversion, photonics, and microtechnologies.

Haigh, R E

1998-01-01T23:59:59.000Z

285

TEAM Technologies, Inc.  

NLE Websites -- All DOE Office Websites (Extended Search)

Technologies, Inc. Technologies, Inc. A New Mexico owned, SBA certified 8(a)/SDB Small Business Pulsed Power Support TEAM Technologies Inc. opened its doors in 1985 as a one-man operation in support of Sandia's Z Machine, a mainstay of the Lab's Pulsed Power program. No longer a one-man shop, TEAM employs more than 70 people and operates over 36,000 square feet of work space in Sandia's Science & Technology Park. According to TEAM's owner and CEO Bob Sachs, much of TEAM's growth over the years has been as a supplier working with Sandia on the Z-Pinch fusion research program. "We were part of the original design and fabrication group for the supporting target hardware on the Z Machine, and we still work closely with that program. Over the years we've responded successfully to the

286

Vendor / Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

Brake Assessment Tools Commercial Motor Vehicle Roadside Technology Corridor Safety Technology Showcase October 14, 2010 Commercial Motor Vehicle Roadside Technology Corridor...

287

Vendor / Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

Brake-Related Research Commercial Motor Vehicle Roadside Technology Corridor Safety Technology Showcase October 14, 2010 Commercial Motor Vehicle Roadside Technology Corridor...

288

Faience Technology  

E-Print Network (OSTI)

by Joanne Hodges. Faience Technology, Nicholson, UEE 2009Egyptian materials and technology, ed. Paul T. Nicholson,Nicholson, 2009, Faience Technology. UEE. Full Citation:

Nicholson, Paul

2009-01-01T23:59:59.000Z

289

Tropical cyclone eye fix using genetic algorithm with temporal information  

Science Conference Proceedings (OSTI)

Tropical cyclones (TCs) are weather systems with vast destructive power. To give early TC warnings, accurate location of their circulation centers, or eyes, is required. The pattern matching solution to this TC eye fix problem works by ...

Ka Yan Wong; Chi Lap Yip

2005-09-01T23:59:59.000Z

290

Freezing Rain Simulations for Fixed, Unheated Conductor Samples  

Science Conference Proceedings (OSTI)

The present paper reports on extensive experiments performed on short, fixed, unheated conductor samples in an outdoor freezing rain simulator. Their purpose is to relate the weight of ice (or, alternatively, the equivalent radial ice thickness) ...

M. L. Lu; N. Popplewell; A. H. Shah

2000-12-01T23:59:59.000Z

291

Orlando Utilities Commission- Home Energy Efficiency Fix-Up Program  

Energy.gov (U.S. Department of Energy (DOE))

Orlando Utilities Commission's Home Energy Fix-Up Program provides assistance to low-income residential customers. To qualify for the program the total annual family income must be less than $40...

292

Thermodynamics of SU(3) gauge theory at fixed lattice spacing  

E-Print Network (OSTI)

We study thermodynamics of SU(3) gauge theory at fixed scales on the lattice, where we vary temperature by changing the temporal lattice size N_t=(Ta_t)^{-1}. In the fixed scale approach, finite temperature simulations are performed on common lattice spacings and spatial volumes. Consequently, we can isolate thermal effects in observables from other uncertainties, such as lattice artifact, renormalization factor, and spatial volume effect. Furthermore, in the EOS calculations, the fixed scale approach is able to reduce computational costs for zero temperature subtraction and parameter search to find lines of constant physics, which are demanding in full QCD simulations. As a test of the approach, we study the thermodynamics of the SU(3) gauge theory on isotropic and anisotropic lattices. In addition to the equation of state, we calculate the critical temperature and the static quark free energy at a fixed scale.

T. Umeda; S. Ejiri; S. Aoki; T. Hatsuda; K. Kanaya; Y. Maezawa; H. Ohno

2008-10-09T23:59:59.000Z

293

Fixed-outline thermal-aware 3D floorplanning  

Science Conference Proceedings (OSTI)

In this paper, we present a novel algorithm for 3D floorplanning with fixed outline constraints and a particular emphasis on thermal awareness. A computationally efficient thermal model that can be used to guide the thermal-aware floorplanning algorithm ...

Linfu Xiao; Subarna Sinha; Jingyu Xu; Evangeline F. Y. Young

2010-01-01T23:59:59.000Z

294

N Reactor Seismic Task Force analysis and fix summary  

Science Conference Proceedings (OSTI)

The N Reactor Safety Enhancement Program (SEP) and the Accelerated Safety Enhancement Program (ASEP) were established to implement recommendations made earlier by study groups assessing the safety of N Reactor. The recommendations which dealt with seismic issues were assigned to Safety Enhancement Programs, Defense Reactor Programs for implementation. A Seismic Task Force was assembled to perform the analyses, design the modifications, direct the performance of the work and provide program management of the effort to seismically qualify the facility. This document identifies the reports published by the task force to resolve each of the seismic issues raised by safety assessments. The reports, in turn, provide a list of recommended fixes (Fixes are potential problems, not resolved in the engineering analyses, which require repair, cleanup or modifications to hardware to establish seismic qualification). The purpose of this report is to provide a guide to seismic fixes implemented by the Seismic Task Force. This information is provided in the form of a ``fix log`` which lists fixes according to the report which recommended them and identifies the work authorization (WA), engineering documentation (Design Change, Field Change Notice or Engineering Change Notice) and acceptance dates for each fix. 5 refs., 6 tabs.

Rainey, T.E.

1989-05-01T23:59:59.000Z

295

Technology Search Results | Brookhaven Technology ...  

There are no technology records available that match the search query. Find a Technology. Search our technologies by categories or by keywords.

296

Technology Transfer: Available Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

test test Please refer to the list of technologies below for licensing and research collaboration availability. If you can't find the technology you're interested in, please contact us at TTD@lbl.gov. Energy ENERGY EFFICIENT TECHNOLOGIES Aerosol Sealing Aerosol Remote Sealing System Clog-free Atomizing and Spray Drying Nozzle Air-stable Nanomaterials for Efficient OLEDs Solvent Processed Nanotube Composites OLEDS with Air-stable Structured Electrodes APIs for Online Energy Saving Tools: Home Energy Saver and EnergyIQ Carbon Dioxide Capture at a Reduced Cost Dynamic Solar Glare Blocking System Electrochromic Device Controlled by Sunlight Electrochromic Windows with Multiple-Cavity Optical Bandpass Filter Electrochromic Window Technology Portfolio Universal Electrochromic Smart Window Coating

297

Building Technologies Program | Clean Energy | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Building Technologies Program Building Technologies Program SHARE Building Technologies Program The Building Technologies Program Office administratively facilitates the integration of ORNL research across disciplines to support federally-and privately-funded research. ORNL's buildings research is directed and funded primarily by the DOE Office of Energy Efficiency and Renewable Energy, specifically the Building Technologies Program. The Federal Energy Management Program, Geothermal Technologies Program, Advanced Manufacturing Office,Office of Weatherization and Intergovernmental Program, Policy and International Affairs, Concentrating Solar Power Program, Sustainability Performance Office, and other partners also support ORNL's research to develop new building technologies. Building Technologies Office

298

CarbFix CO2 Injection Pilot Project, J. M. Matter, M. Stute & W. Broecker  

E-Print Network (OSTI)

Fix Injection Site #12;A Conceptual Carbonation Model Injec8on well: CO2 fully dissolvedCarbFix CO2 Injection Pilot Project, Iceland J. M. Matter, M. Stute & W. Broecker Lamont Pétursson #12;CarbFix Injection Site #12;CarbFix CO2 Injection Site #12;CarbFix Injection Site 2

299

Contracts for field projects and supporting research on enhanced oil recovery. Progress review No. 67, quarter ending June 30, 1991  

Science Conference Proceedings (OSTI)

Progress reports are presented for the following tasks: chemical flooding-supporting research; gas displacement-supporting research; thermal recovery-supporting research; geoscience technology; resource assessment technology; microbial technology; environmental technology; and novel technology. A list of available publications is also included.

Not Available

1992-07-01T23:59:59.000Z

300

Technology Search Results | Brookhaven Technology ...  

Staff Directory; BNL People Technology Commercialization & Partnerships. Home; For BNL Inventors; ... a nonprofit applied science and technology organization. ...

Note: This page contains sample records for the topic "fixed support technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Technology Search Results | Brookhaven Technology ...  

Non-Noble Metal Water Electrolysis Catalysts; Find a Technology. Search our technologies by categories or by keywords. Search ...

302

Technology Search Results | Brookhaven Technology ...  

BSA 08-04: High Temperature Interfacial Superconductivity; Find a Technology. Search our technologies by categories or by keywords. Search ...

303

Technology Search Results | Brookhaven Technology ...  

Receive Technology Updates. Get email notifications about new or improved technologies in your area of interest. Subscribe

304

Offshore Technology  

E-Print Network (OSTI)

This report, and the roadmapping exercise that produced it, is the result of a series of transparent workshops held across the nation. A wealth of information was produced to compliment internal sources like the Energy Information Administration. The active participation of the Department's stakeholders is greatly appreciated. Walter Rosenbusch, Director of the Minerals Management Service (MMS) deserves special recognition. His partnership, participation and input were instrumental to the success of this effort. I also would like to thank my friend Governor Mark White for his participation and support of this effort. In addition, I thank the following workshop chairs and moderators for their participation and contribution to the roadmapping efforts: Mary Jane Wilson, WZI, Inc.; Ron Oligney, Dr. Michael Economides, and Jim Longbottom, University of Houston; John Vasselli, Houston Advanced Research Center; and Art Schroeder, Energy Valley. This report, however, does not represent the end of such long-range planning by the Department, its national labs, and its stakeholders. Rather it is a roadmap for accelerating the journey into the ultradeepwater Western Gulf of Mexico. The development of new technologies and commercialization paths, discoveries by marine biologists, and the fluctuations of international markets will continue to be important influences. With that in mind, let the journey begin. Emil Pea Deputy Assistant Secretary for Natural Gas and Petroleum Technology OFFSHORE TECHNOLOGY ROADMAP FOR THE ULTRA-DEEPWATER GULF OF MEXICO U.S. Department of Energy Maximumhistm,183 oil product,0 ratd for Gulf of Mexico wells. Taller barsindicat higherproduct44 ratdu The dat show numerous deepwat, oil wells producedat significant2 higherrate tt ever seen in t, Gulf of ...

Roadmap For The; Deepwater Gulf; Of Mexico

2000-01-01T23:59:59.000Z

305

Renewable Hydrogen: Technology Review and Policy Recommendations for State-Level Sustainable Energy Futures  

E-Print Network (OSTI)

Strategy for Hydrogen Energy Technologies, Florida HydrogenPromoting Alternative Energy Technology, Presentation at theand other clean energy technologies would support their

Lipman, Timothy; Edwards, Jennifer Lynn; Brooks, Cameron

2006-01-01T23:59:59.000Z

306

Vehicle Technologies Office: Emission Control R&D  

NLE Websites -- All DOE Office Websites (Extended Search)

Control R&D The Vehicle Technologies Office (VTO) supports research and development of aftertreatment technologies to control advanced combustion engine exhaust emissions. All...

307

Fossil Energy-Developed Fuel Cell Technology Being Adapted by...  

NLE Websites -- All DOE Office Websites (Extended Search)

31, 2013 Fossil Energy-Developed Fuel Cell Technology Being Adapted by Navy for Advanced Unmanned Undersea Vehicles Solid Oxide Fuel Cell Technology Supported by Research Funding...

308

Investigations of Biomass Pretreatment and Submerged Fixed-bed Fermentation  

E-Print Network (OSTI)

To improve the MixAlco process and biomass pretreatment, five studies were conducted. Three studies related to fermentation, whereas the other two investigated the effectiveness of shock tube pretreatment (STP) coupled with oxidative lime pretreatment (OLP). In the first study, the constant-selectivity assumption used in the continuum particle distribution model (CPDM) was determined to be invalid. During a 32-day batch fermentation, selectivity increased from 0.10 to 0.40 g acid/g non-acid volatile solid (NAVS) digested. Future revisions to CPDM should incorporate a non-constant selectivity term. In the second study, a revised procedure was developed to provide a more accurate determination of moisture content. Conventional drying at 105 degrees C allowed product acids to vaporize with water, which introduced errors. Using the revised procedure, calcium hydroxide or sodium hydroxide was added to samples at a concentration of 0.01 g base/g sample, which retained acids in the sample. The mass of additional retained material closely matched that of the additional retained acid. Three related studies involving biomass pretreatment were performed. In the first, recommended parameters for pretreating sugarcane bagasse with OLP and STP were determined. Recommended OLP parameters were 130 degrees C, 6.9-bar O2, and 2-h duration. The effects of solids concentration, liquid fill volume, particle size, type of shotgun shell, number of shocks, and pretreatment order were investigated. Liquid fill volume, particle size, type of shotgun shell, and pretreatment order were significant variables, whereas solids concentration and number of shocks were not. Recommended OLP parameters were used as a basis for an additional experiment. To simulate industrial-scale pile fermentation, fixed-bed batch fermentation of OLP + STP sugarcane bagasse was performed in 1-L PVC fermentors. Rubber mulch was used as a structural support material to prevent filter plugging, which had been reported in previous work. After 42 d, acid concentration reached 8 g/L with yield approximately 0.1 g acid/g NAVS fed. Poor fermentation performance was caused by short solid-liquid contact time and poor pH control. A third biomass pretreatment experiment investigated the potential of pretreated corn stover as a potential ruminant feed. Five samples (raw, OLP, STP, OLP + STP, and STP + OLP) were analyzed for composition and in vitro digestibility. STP followed by OLP increased neutral detergent fiber (NDF) digestibility from 49.3 to 79.0 g NDF digested/100 g NDF fed. On an organic matter basis, STP + OLP corn stover plus water-soluble extractives had a total digestible nutrients (TDN) of 74.9, nearly reaching corn grain at 88.1.

Meysing, Daniel

2011-12-01T23:59:59.000Z

309

Technology Transfer: Available Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Please refer to the list of technologies below for licensing and research Please refer to the list of technologies below for licensing and research collaboration availability. If you can't find the technology you're interested in, please contact us at TTD@lbl.gov. Biotechnology and Medicine DIAGNOSTICS AND THERAPEUTICS CANCER CANCER PROGNOSTICS 14-3-3 Sigma as a Biomarker of Basal Breast Cancer ANXA9: A Therapeutic Target and Predictive Marker for Early Detection of Aggressive Breast Cancer Biomarkers for Predicting Breast Cancer Patient Response to PARP Inhibitors Breast Cancer Recurrence Risk Analysis Using Selected Gene Expression Comprehensive Prognostic Markers and Therapeutic Targets for Drug-Resistant Breast Cancers Diagnostic Test to Personalize Therapy Using Platinum-based Anticancer Drugs Early Detection of Metastatic Cancer Progenitor Cells

310

Contracts for field projects and supporting research on enhanced oil recovery. Progress review No. 44, quarter ending September 30, 1985  

SciTech Connect

Progress reports are presented for: field projects and supporting research for chemical flooding and gas displacement; supporting research for thermal methods; microbial technology; research assessment technology; and environmental technology.

Not Available

1986-09-01T23:59:59.000Z

311

Markets and Support Schemes for Renewable  

E-Print Network (OSTI)

Markets and Support Schemes for Renewable Technologies Senior Research Specialist Poul Erik (Denmark, Norway, Sweden, Finland), England - Other countries on the way · Development of renewable energy technologies - EU targets for renewable deployment - Especially wind power experiences a rapid development #12

312

Contracts for field projects and supporting research on enhanced oil recovery. Progress Review No. 69, quarter ending December 31, 1991  

SciTech Connect

Progress reports are presented for the following tasks: chemical flooding supporting research; gas displacement supporting research; thermal recovery supporting research; geoscience technology; resource assessment; and microbial technology. A list of available publications is also included.

Not Available

1993-02-01T23:59:59.000Z

313

Selected Research Issues in Decision Support Databases  

Science Conference Proceedings (OSTI)

A flurry of buzzwords awaits anyone investigating database technology for decision support: data warehouse, multidimensional and dimensional database, on-line analytical processing, star schema, slicing, dicing, drill-down and roll-up. We introduce ... Keywords: data warehouse, databases, decision-support, dimensional, multidimensional

David Maier; Mary Edie Meredith; Leonard Shapiro

1998-09-01T23:59:59.000Z

314

Creating creativity: user interfaces for supporting innovation  

Science Conference Proceedings (OSTI)

A challenge for human-computer interaction researchers and user interf ace designers is to construct information technologies that support creativity. This ambitious goal can be attained by building on an adequate understanding of creative processes. ... Keywords: creativity support tools, direct manipulation, graphical user interfaces, human-computer interaction, information visualization

Ben Shneiderman

2000-03-01T23:59:59.000Z

315

arXiv.org help - arXiv 2012 Supporters  

NLE Websites -- All DOE Office Websites (Extended Search)

2. Requests for support will be based on 2011 usage data. For more details see arXiv support. Tier 1 Brookhaven National Laboratory California Institute of Technology CERN...

316

Cheap Fixes for Beating the Heat Indoors | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Cheap Fixes for Beating the Heat Indoors Cheap Fixes for Beating the Heat Indoors Cheap Fixes for Beating the Heat Indoors July 25, 2013 - 11:20am Addthis Blinds are a great option for cooling your home in the summer. | Photo courtesy of ©iStockphoto/nycshooter Blinds are a great option for cooling your home in the summer. | Photo courtesy of ©iStockphoto/nycshooter Erik Hyrkas Erik Hyrkas Media Relations Specialist, Office of Energy Efficiency & Renewable Energy How can I participate? Instead of turning on the air conditioning, consider window treatments and fans to cool down your home. If your internal thermostat is melting like the rest of the U.S. right now, you probably could use some fanning, ice, or air conditioning. With that in mind, we are providing a rundown of the cheapest ways to keep your home

317

Regenerable Mixed Copper-Iron-Inert Support Oxygen ...  

Regenerable Mixed Copper-Iron-Inert Support Oxygen Carriers for Solid Fuel Chemical Looping Combustion Process Contact NETL Technology Transfer Group

318

The Gasifier Optimization and Plant Supporting Systems area focuses...  

NLE Websites -- All DOE Office Websites (Extended Search)

Gasifier Optimization and Plant Supporting Systems area focuses on the development of technologies and models to improve the performance of advanced gasifiers. Specifically,...

319

Support Materials Development and Integration for Ultrasonic Consolidation.  

E-Print Network (OSTI)

?? Support materials play a vital role across the entire field of additive manufacturing (AM) technologies. They are essential to provide the ability to create (more)

Swank, Matthew L.

2010-01-01T23:59:59.000Z

320

Geographic Information Systems: Status and Strategies for Supporting...  

NLE Websites -- All DOE Office Websites (Extended Search)

will focus on the use of one of these technologies, Geographic Information Systems (GIS). At the National Renewable Energy Laboratory, GIS is used to support analysis...

Note: This page contains sample records for the topic "fixed support technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

State Support of Domestic Production  

SciTech Connect

This project was developed in response to a cooperative agreement offering by the U.S. Department of Energy (DOE) and the National Energy Technology Laboratory (NETL) under the State Support of Domestic Production DE-FC26-04NT15456. The Interstate Oil and Gas Compact Commission (IOGCC) performed efforts in support of State programs related to the security, reliability and growth if our nation's domestic production of oil and natural gas. The project objectives were to improve the States ability to monitor the security of oil and gas operations; to maximize the production of domestic oil and natural gas thereby minimizing the threat to national security posed by interruptions in energy imports; to assist States in developing and maintaining high standards of environmental protection; to assist in addressing issues that limit the capacity of the industry; to promote the deployment of the appropriate application of technology for regulatory efficiency; and to inform the public about emerging energy issues.

Amy Wright

2007-12-30T23:59:59.000Z

322

Technology Catalogue. First edition  

SciTech Connect

The Department of Energy`s Office of Environmental Restoration and Waste Management (EM) is responsible for remediating its contaminated sites and managing its waste inventory in a safe and efficient manner. EM`s Office of Technology Development (OTD) supports applied research and demonstration efforts to develop and transfer innovative, cost-effective technologies to its site clean-up and waste management programs within EM`s Office of Environmental Restoration and Office of Waste Management. The purpose of the Technology Catalogue is to provide performance data on OTD-developed technologies to scientists and engineers assessing and recommending technical solutions within the Department`s clean-up and waste management programs, as well as to industry, other federal and state agencies, and the academic community. OTD`s applied research and demonstration activities are conducted in programs referred to as Integrated Demonstrations (IDs) and Integrated Programs (IPs). The IDs test and evaluate.systems, consisting of coupled technologies, at specific sites to address generic problems, such as the sensing, treatment, and disposal of buried waste containers. The IPs support applied research activities in specific applications areas, such as in situ remediation, efficient separations processes, and site characterization. The Technology Catalogue is a means for communicating the status. of the development of these innovative technologies. The FY93 Technology Catalogue features technologies successfully demonstrated in the field through IDs and sufficiently mature to be used in the near-term. Technologies from the following IDs are featured in the FY93 Technology Catalogue: Buried Waste ID (Idaho National Engineering Laboratory, Idaho); Mixed Waste Landfill ID (Sandia National Laboratories, New Mexico); Underground Storage Tank ID (Hanford, Washington); Volatile organic compound (VOC) Arid ID (Richland, Washington); and VOC Non-Arid ID (Savannah River Site, South Carolina).

Not Available

1994-02-01T23:59:59.000Z

323

Vehicle Technologies Office: Software Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Software Tools Software Tools Several software programs are available, either for free or for a nominal charge, that can assist fleet managers and technology developers in assessing the potential impacts of implementing new technologies. Autonomie Autonomie is a Plug-and-Play Powertrain and Vehicle Model Architecture and Development Environment to support the rapid evaluation of new powertrain/propulsion technologies for improving fuel economy through virtual design and analysis in a math-based simulation environment. Developed in partnership with General Motors, Autonomie is an open architecture to support the rapid integration and analysis of powertrain/propulsion systems and technologies for rapid technology sorting and evaluation of fuel economy improvement under dynamic/transient testing conditions. The capability to sort technologies rapidly in a virtual design environment results in faster improvements in real-world fuel consumption by reducing the time necessary to develop and bring new technologies onto our roads.

324

The Institute for Critical Technology and Applied Science at Virginia Tech supports and promotes cutting-edge research at the intersection of engineering, science, and medicine. Please visit www.ictas.vt.edu.  

E-Print Network (OSTI)

.ictas.vt.edu. Fuel Cell Research A Focus Area within the ICTAS Sustainable Energy Thrust Mission The mission cell technology to help meet society's energy needs. Technical Approach At its core, a fuel cell employees, students, or applicants for admission or employment on the basis of race, gender, disability, age

Beex, A. A. "Louis"

325

Technology Transfer: Available Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Ion Sources and Beam Technologies Ion Sources and Beam Technologies GENERATORS AND DETECTORS Compact, Safe and Energy Efficient Neutron Generator Fast Pulsed Neutron Generator High Energy Gamma Generator Lithium-Drifted Silicon Detector with Segmented Contacts Low Power, High Energy Gamma Ray Detector Calibration Device Nested Type Coaxial Neutron Generator Neutron and Proton Generators: Cylindrical Neutron Generator with Nested Option, IB-1764 Neutron-based System for Nondestructive Imaging, IB-1794 Mini Neutron Tube, IB-1793a Ultra-short Ion and Neutron Pulse Production, IB-1707 Mini Neutron Generator, IB-1793b Compact Spherical Neutron Generator, IB-1675 Plasma-Driven Neutron/Gamma Generators Portable, Low-cost Gamma Source for Active Interrogation ION SOURCES WITH ANTENNAS External Antenna for Ion Sources

326

OHVT technology roadmap [2000  

DOE Green Energy (OSTI)

The OHVT Technology Roadmap for 2000 presents the multiyear program plan of the U.S. DOE's Office of Heavy Vehicle Technologies (OHVT). It is an update of the 1997 plan, reflecting changes in regulations and ongoing discussions with DOE's heavy vehicle customers. The technical plan covers three classes of trucks: (1) class 7-8 (large, on-highway trucks); (2) class 3-6 (medium duty trucks); (3) class 1-2 (pickups, vans, and sport utility vehicles) as well as enabling and supporting technologies. The Roadmap documents program goals, schedules, and milestones.

Bradley, R.A.

2000-02-01T23:59:59.000Z

327

Tools & Technologies  

Energy.gov (U.S. Department of Energy (DOE))

Weprovide leadership for transforming workforce development through the power of technology. It develops corporate educational technology policy and enables the use of learning tools and...

328

Available Technologies  

The technologys subnanometer resolution is a result of superior ... Additional R&D will be required ... U.S. DEPARTMENT OF ENERGY OFFICE OF SCIENCE ...

329

Energy Technology Programs: program summaries for 1979  

DOE Green Energy (OSTI)

The Energy Technology Programs in the BNL Department of Energy and Environment cover a broad range of activities, namely: electrochemical research, chemical energy storage, chemical heat pumps, solar technology, fossil technology, catalytic systems development, space-conditioning technology, and technical support/program management. Summaries of the individual tasks associated with these activities along with publications, significant accomplishments, and program funding levels are presented.

Not Available

1979-12-01T23:59:59.000Z

330

Automatic Template Matching Method for Tropical Cyclone Eye Fix  

Science Conference Proceedings (OSTI)

A time-honored way of finding, or fixing, the center of a tropical cyclone (TC) is to overlay templates of spirals onto a printout of radar or satellite image. Modern methods, however, mostly focus on wind field analysis, or other motion vector techniques. ...

Wong Ka Yan; Yip Chi Lap; Li Ping Wah; Tsang Wai Wan

2004-08-01T23:59:59.000Z

331

Web Migration The Web What needs to be fixed?  

E-Print Network (OSTI)

Web Update Web Migration #12;2 The Web ­ What needs to be fixed? · Lack of governance · Lack of clear roles and responsibilities for Web team · Multiple people working with the Web across the site-term Web Task Force to get lab input on above #12;3 Where Do We Stand? · Creation of Web Task Force

Wechsler, Risa H.

332

METHOD OF FIXING NITROGEN FOR PRODUCING OXIDES OF NITROGEN  

DOE Patents (OSTI)

A method is described for fixing nitrogen from air by compressing the air, irradiating the compressed air in a nuclear reactor, cooling to remove NO/ sub 2/, compressing the cooled gas, further cooling to remove N/sub 2/O and recirculating the cooled compressed air to the reactor.

Harteck, P.; Dondes, S.

1959-08-01T23:59:59.000Z

333

Resource management policies for fixed relays in cellular networks  

Science Conference Proceedings (OSTI)

Mobile stations in the cell boundary experience poor spectral efficiency due to the path loss and interference from adjacent cells. Therefore, satisfying QoS requirements of each MS at the cell boundary has been an important issue. To resolve this spectral ... Keywords: Cellular networks, Fixed relay, Path selection, Resource reuse, Spectral efficiency

Won-Hyoung Park; Saewoong Bahk

2009-03-01T23:59:59.000Z

334

Monitoring the Fixed FGD Sludge Landfill--Conesville, Ohio  

Science Conference Proceedings (OSTI)

Three years of extensive monitoring of the first full-scale application of the fixed flue gas desulfurization sludge process proved it technically sound. This new disposal method offers utilities leachate control in a landfill that allows diverse use of disposal sites in the future.

1984-10-01T23:59:59.000Z

335

UFO: unified convex optimization algorithms for fixed-outline floorplanning  

Science Conference Proceedings (OSTI)

In this paper, we apply two convex optimization methods, named UFO, for fixed-outline floorplanning. Our approach consists of two stages which are a global distribution stage and a local legalization stage. In the first stage, we first transform modules ...

Jai-Ming Lin; Hsi Hung

2010-01-01T23:59:59.000Z

336

Fixed-bed reforming with mid-cycle catalyst addition  

Science Conference Proceedings (OSTI)

A fixed-bed catalytic reforming process is described in which on-stream operation is begun with the catalyst retention volume in the first reactor less than 99% full and additional catalyst is added to said reactor while on-stream.

Houston, R.J.; McCoy, C.S.

1981-02-17T23:59:59.000Z

337

While it is in our common interest to pursue technology ...  

Science Conference Proceedings (OSTI)

... This unconventional tax incentive will motivate shareholders to support technology assurance efforts and creates patient capital to endure ...

2010-10-04T23:59:59.000Z

338

Spectrum Correlated Criteria and Their Impacts on High Altitude Platform Station (HAPS) and Fixed Satellite Service (FSS) Coexistence in Frequency Range 5,850---7,075 MHz  

Science Conference Proceedings (OSTI)

High altitude platform station (HAPS) is an innovative technology which delivers some unique features, contrary to conventional communications networks, such as fixed satellite service (FSS). The absence of confirmed spectrum emission mask (SEM) of HAPS ... Keywords: Adjacent channel interference ratio (ACIR), Clutter loss, Interference to noise ratio (I/N), Mask discrimination (MD), Net filter discrimination (NFD), Spectrum emission mask (SEM)

M. Mohebbi Nia; T. Abdul Rahman

2013-03-01T23:59:59.000Z

339

Fuel Cell Technologies Office: Market Transformation  

NLE Websites -- All DOE Office Websites (Extended Search)

supporting the role that fuel cells play in our nation's energy portfolio. Through its market transformation efforts, the Fuel Cell Technologies Office seeks to accelerate the...

340

FY 2004 Technology Administration Budget Highlights  

Science Conference Proceedings (OSTI)

... to support commercial applications; and developing a state ... to invest in and develop high-risk ... and diagnostic hardware technology developed with co ...

2010-10-05T23:59:59.000Z

Note: This page contains sample records for the topic "fixed support technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Facility for Environmentally Friendly Transport Technology and...  

Open Energy Info (EERE)

practical support to developing countries on participating in technology transfer and developing nationally appropriate mitigation actions (NAMAs) in the transport sector. A...

342

Vehicle Technologies Office: Program Plans, Implementation, and...  

NLE Websites -- All DOE Office Websites (Extended Search)

Motors Annual Progress Report The Advanced Power Electronics and Electric Motors (APEEM) program within the DOE Vehicle Technologies Office (VTO) provides support and...

343

Testing for the technology barrier: Applets - CECM  

E-Print Network (OSTI)

Sep 24, 1998 ... Testing for the technology barrier: Applets. The first stage was to support the creation of a set of focussed resources by a model teacher.

344

NREL: Energy Analysis - Electric Infrastructure Systems Technology...  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Analysis NREL's energy analysis supports distribution and interconnection R&D, which is responsible for distributed resources' system integration. Industrial...

345

Vehicle Technologies Office: Vehicle Technologies Office Organization...  

NLE Websites -- All DOE Office Websites (Extended Search)

Organization and Contacts Organization Chart for the Vehicle Technologies Program Fuel Technologies and Deployment, Technology Managers Advanced Combustion Engines, Technology...

346

Fuel Cell Technologies Office: Technology Validation  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Information Technology Validation Search Search Help Technology Validation EERE Fuel Cell Technologies Office Technology Validation Printable Version Share this resource...

347

Advanced Technology and Knowledge Transfer  

Science Conference Proceedings (OSTI)

This paper reports on a specific food and agribusiness industry project, employing new technological capabilities to better transfer expert knowledge. Knowledge transfer and technical support are key components of this project. VisIT, which stands for ...

Geetanjali Tandon; Steven T. Sonka

2003-01-01T23:59:59.000Z

348

2008 Solar Technologies Market Report  

E-Print Network (OSTI)

Energy Production Incentive .. 84 4.1.11 Additional Resources .. 84 4.2 State andof State Incentives for Renewables & Efficiency Energyincentives available to support the increased deployment of solar energy technologies. State and

Price, S.

2010-01-01T23:59:59.000Z

349

Chemistry - Technology Transfer: Available Technologies  

Please refer to the list of technologies below for licensing and research collaboration availability. If you can't find the technology you ...

350

Technology Analysis - Heavy Vehicle Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

the GPRA benefits estimates for EERE's Vehicle Technologies Program's heavy vehicle technology research activities. Argonne researchers develop the benefits analysis using four...

351

Emergency Support Function #12; Energy Annex - Support Agencies...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Emergency Support Function 12; Energy Annex - Support Agencies Emergency Support Function 12; Energy Annex - Support Agencies Emergency Support Function 12 - Energy Annex -...

352

Available Technologies  

APPLICATIONS OF TECHNOLOGY: Thermal management for: microelectronic devices; solar cells and solar energy management systems ; refrigerators

353

Available Technologies  

Energy Storage and Recovery; Renewable Energy; Environmental Technologies. Monitoring and Imaging; Remediation; Modeling; Imaging & Lasers.

354

Contracts for field projects and supporting research on enhanced oil recovery. Progress review No. 43, quarter ending June 30, 1985  

Science Conference Proceedings (OSTI)

Progress reports are presented for field projects and supporting research for the following: (1) chemical flooding; gas displacement thermal recovery/heavy oil; resource assessment technology; extraction technology;environmental technology; and microbial technology. (AT)

Not Available

1986-05-01T23:59:59.000Z

355

DOE Selects Mission Support Alliance, LLC for Mission Support Contract at  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Mission Support Alliance, LLC for Mission Support Mission Support Alliance, LLC for Mission Support Contract at its Hanford Site DOE Selects Mission Support Alliance, LLC for Mission Support Contract at its Hanford Site September 3, 2008 - 3:20pm Addthis WASHINGTON, DC - The U.S. Department of Energy (DOE) today announced the Mission Support Alliance, LLC has been selected as the mission support contractor for DOE's Hanford Site in southeastern Washington State. The contract is a cost-plus award-fee contract valued at approximately $3.0 billion over ten years (a five-year base period with options to extend it for up to another five years). The Mission Support Alliance, LLC is a limited liability company formed by Lockheed Martin Integrated Technology, LLC; Jacobs Engineering Group, Inc.; and Wackenhut Services, Inc. Pre-selected subcontractors include Abadan,

356

Contracts for field projects and supporting research on enhanced oil recovery  

SciTech Connect

Accomplishments for the past quarter are presented for the following tasks: chemical flooding--supporting research; gas displacement--supporting research; thermal recovery--supporting research; geoscience technology; resource assessment technology; and microbial technology. A list of available publication is also provided.

Not Available

1993-03-01T23:59:59.000Z

357

Solar Energy Technologies FY'14 Budget At-a-Glance  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SOLAR ENERGY TECHNOLOGIES FY14 BUDGET AT-A-GLANCE Solar Energy Technologies supports the SunShot goal to make solar energy technologies cost-competitive with conventional energy...

358

Smart Charger Technology Development  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Charger Technology Charger Technology Development Presented by: Frank Tuffner Pacific Northwest National Laboratory Smart Grid R&D Peer Review November 4, 2010 Golden, CO Project Team: Michael Kintner-Meyer, PI Krishnan Gowri Richard Pratt Nathan Tenney Frank Tuffner PNNL-SA-75999 Analysis and Development Grid Capabilities for the Electrification of Transportation Goals and Objectives Funding Summary ($K) FY09 FY10 FY11 $350 $500 $500 Technical Scope GOAL: * Assure grid can support electrification of transportation * Assure that EVs/PHEVs will not create new peaks (locally or regionally) or electricity prices will not support large adoption of EVs/PHEVs Objectives: * Assess grid benefits and impacts of electrification of transportation * Technology demonstration * Actively engage in codes and standards

359

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

to 250KV) Self supported encapsulated coils Mold with Encapsulated High Voltage Test Transformer Self supported encapsulated coils Mold with Encapsulated High Voltage Test...

360

Contracts for field projects and supporting research on enhanced oil recovery: Progress review No. 74, Quarter ending March 31, 1993  

SciTech Connect

Accomplishments for the past quarter are presented for the following tasks: chemical flooding--supporting research; gas displacement--supporting research; thermal recovery--supporting research; geoscience technology; resource assessment technology; microbial technology; field demonstrations in high-priority reservoir classes; and novel technology. A list of available publication is also provided.

Not Available

1994-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "fixed support technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Contracts for field projects and supporting research on enhanced oil recovery. Progress review No. 71, quarter ending June 30, 1992  

SciTech Connect

Progress reports are presented for the following tasks: chemical flooding--supporting research; gas displacement--supporting research; thermal recovery--supporting research; geoscience technology; resource assessment technology; microbial technology; and novel technology. A list of available publication is also provided.

Not Available

1993-06-01T23:59:59.000Z

362

Fuel Cell Technologies Office: Technology Validation  

NLE Websites -- All DOE Office Websites (Extended Search)

Fuel Cell Technologies Office: Technology Validation to someone by E-mail Share Fuel Cell Technologies Office: Technology Validation on Facebook Tweet about Fuel Cell Technologies...

363

A decision support system for green data centers  

Science Conference Proceedings (OSTI)

In this paper, we propose a decision support system for green computing in data centers on campuses. Green computing aims at the development of technologies for a greener and more sustainable planet. In this work we focus on the greening of data centers ... Keywords: data centers, decision support systems, decision trees, green information technology

Michael J. Pawlish; Aparna S. Varde

2010-10-01T23:59:59.000Z

364

MHK Technologies/SEACAP | Open Energy Information  

Open Energy Info (EERE)

SEACAP SEACAP < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage SEACAP.jpg Technology Profile Primary Organization HYDROCAP ENERGY SAS Technology Resource Click here Current Technology Type Click here Point Absorber - Floating Technology Readiness Level Click here TRL 4 Proof of Concept Technology Description The device is made of a fixed central jacket having several external legs around A floater moves up and down the jacket s legs under the action of the waves The floater is made of two hulls which are built onshore and flotted to the jacket site clamped around the jacket legs In initial solution several wheels attached to the floater will be driven along the pile by the vertical movement of the floater and will in turn drive several generators located inside the hulls Alternatively the floater may also drive a hydraulic system located on the above plateform deck which in turn will drive an hydraulic motor and finally an electric generator The system may be combined with the structure of offshore fixed windmills in a combined wave wind energy convertor thereby sharing some of the fixed installation and production costs and increasing at marginal cost the production of the windmill installation by around 30

365

Technical support for the Ohio Clean Coal Technology Program. Volume 2, Baseline of knowledge concerning process modification opportunities, research needs, by-product market potential, and regulatory requirements: Final report  

Science Conference Proceedings (OSTI)

This report was prepared for the Ohio Coal Development Office (OCDO) under Grant Agreement No. CDO/R-88-LR1 and comprises two volumes. Volume 1 presents data on the chemical, physical, and leaching characteristics of by-products from a wide variety of clean coal combustion processes. Volume 2 consists of a discussion of (a) process modification waste minimization opportunities and stabilization considerations; (b) research and development needs and issues relating to clean coal combustion technologies and by-products; (c) the market potential for reusing or recycling by-product materials; and (d) regulatory considerations relating to by-product disposal or reuse.

Olfenbuttel, R.; Clark, S.; Helper, E.; Hinchee, R.; Kuntz, C.; Means, J.; Oxley, J.; Paisley, M.; Rogers, C.; Sheppard, W.; Smolak, L. [Battelle, Columbus, OH (United States)

1989-08-28T23:59:59.000Z

366

Bottom-up Representation of Industrial Energy Efficiency Technologies in Integrated Assessment Models for the Cement Sector  

E-Print Network (OSTI)

St. Louis, Missouri. Energy Technology Support Unit (ETSU),de Beer, 1997. "Energy Efficient Technologies in Industry -and MAIN, 1993. Energy Technology in the Cement Industrial

Sathaye, J.

2011-01-01T23:59:59.000Z

367

Crosscutting Technology Development | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Crosscutting Crosscutting Technology Development Crosscutting Technology Development The NEET Crosscutting Technology Development (CTD) activity provides R&D support to various reactor and fuel cycle technologies, both existing and under development. These include several areas that crosscut multiple nuclear technologies CTD aims to: Work with other NE R&D programs to identify critical capabilities and common technology needs. Encourage and lead coordinated research and development activities to deliver capabilities and technologies when needed to ensure NE R&D program success. Ensure scalability and compatibility of results across NE R&D programs. Reduce costs of resulting technologies and capabilities. Leverage programmatic investments to maximize benefits across the

368

Emerging Technologies Activities | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Emerging Technologies Activities Emerging Technologies Activities Emerging Technologies Activities The Emerging Technologies team focuses on the development and testing of next-generation technologies that can increase the energy efficiency of existing technologies and help support the goal of reducing energy consumption by at least 50%. By partnering with industry, researchers, and other stakeholders, the Department of Energy (DOE) acts as a catalyst in driving research in energy efficient technologies, including: Refrigerators, washers, dryers, and other appliances Parts of the building envelope, including insulation, roofing and attics, foundations, and walls Window, skylight, and door technologies, such as highly-insulating windows, glazings and films, window frames, and daylighting and shading

369

Nuclear Energy Enabling Technologies | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Enabling Technologies Enabling Technologies Nuclear Energy Enabling Technologies Nuclear Energy Enabling Technologies The Nuclear Energy Enabling Technologies (NEET) Program will develop crosscutting technologies that directly support and complement the Department of Energy, Office of Nuclear Energy's (DOE-NE) advanced reactor and fuel cycle concepts, focusing on innovative research that offers the promise of dramatically improved performance. NEET will coordinate research efforts on common issues and challenges that confront the DOE-NE R&D programs (Light Water Reactor Sustainability [LWRS], Next Generation Nuclear Plant [NGNP], Advanced Reactor Technologies [ART], and Small Modular Reactors [SMR]) to advance technology development and deployment. The activities undertaken in the NEET program will

370

Fixed-base platform concepts for deepwater Gulf of Mexico  

Science Conference Proceedings (OSTI)

Today, offshore platforms are installed in water as deep as 5,000 ft. Gulf of Mexico offshore platforms can be categorized by the water-depth ranges where they are cost-effective: Fixed-base rigid platforms (to approximately 1,400 ft); Compliant towers (1,200 to 2,000 ft); and Floating systems (deeper than 1,600 ft). The paper describes production and equipment, design, platform concepts, in-place considerations, fabrication considerations, and installation considerations.

NONE

1998-04-01T23:59:59.000Z

371

Technology Transfer Overview | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Services » Technology Transfer and Procurement » Technology Services » Technology Transfer and Procurement » Technology Transfer & Intellectual Property » Technology Transfer Overview Technology Transfer Overview Through strategic investments in science and technology, the U.S. Department of Energy (DOE) helps power and secure America's future. DOE's capabilities, and the innovations it supports, help ensure the country's role as a leader in science and technology. In particular, technology transfer supports the maturation and deployment of DOE discoveries, providing ongoing economic, security and environmental benefits for all Americans. "Technology transfer" refers to the process by which knowledge, intellectual property, or capabilities developed at the Department of Energy's National Laboratories, single-purpose research facilities, plants,

372

MHK Technologies/Kinetic Hydropower System KHPS | Open Energy Information  

Open Energy Info (EERE)

Kinetic Hydropower System KHPS Kinetic Hydropower System KHPS < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Verdantpower.jpg Technology Profile Primary Organization Verdant Power Project(s) where this technology is utilized *MHK Projects/Roosevelt Island Tidal Energy RITE *MHK Projects/Cornwall Ontario River Energy CORE Technology Resource Click here Current/Tidal Technology Type Click here Axial Flow Turbine Technology Readiness Level Click here TRL 7/8: Open Water System Testing & Demonstration & Operation Technology Description Verdant Power's central technology is the Kinetic Hydropower System (KHPS), a water-to-wire system that consists of three main components: 1) KHPS TURBINE: a three-bladed horizontal-axis turbine with four major assemblies: a) Composite rotor with 3-fixed blades that rotate at the relatively slow and constant speed of approximately 40 RPM, with tip-speeds of 35 feet per second. This is well below normal water vessel propeller speeds and conventional hydropower turbine blade speeds. b) Sealed nacelle, pylon and passive yaw mechanism that is hydrodynamically designed to allow the turbine to self-rotate into the prevailing current (like a weathervane) so that the blades are optimally aligned to generate energy. c) Custom-designed drivetrain unit (with induction generator) enclosed within the nacelle that integrates the bearing housing with a special long-life planetary gearbox, with mechanical shaft seals and a minimum of sealed lubricants. d) Streambed mounting system that can vary depending on site conditions as a single drilled monopile, a single gravity-based structure, or a gravity-based triframe mount that supports 3 turbines. 2) UNDERWATER CABLING: low-voltage shielded cable of short distance; and shoreline switchgear vaults, control room, and interconnection point(s). 3) APPURTENANT FACILITIES: for navigation safety, such as Public Aides to Navigation (PATON) buoys and lighted warning signs, as well as instrumentation including Acoustic Doppler Current Profilers (ADCPs). In order to maximize the application of the KHPS within the global MHK resource, Verdant Power has designed the technology as a simple and uniquely scalable system that can be operated in tidal, river and ocean current settings. Possible KHPS installations range from distributed generation arrangements in near-shore urban and village settings to base power generation at offshore deepwater locales.

373

Benchmarking Biomass Gasification Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Biomass Gasification Technologies for Biomass Gasification Technologies for Fuels, Chemicals and Hydrogen Production Prepared for U.S. Department of Energy National Energy Technology Laboratory Prepared by Jared P. Ciferno John J. Marano June 2002 i ACKNOWLEDGEMENTS The authors would like to express their appreciation to all individuals who contributed to the successful completion of this project and the preparation of this report. This includes Dr. Phillip Goldberg of the U.S. DOE, Dr. Howard McIlvried of SAIC, and Ms. Pamela Spath of NREL who provided data used in the analysis and peer review. Financial support for this project was cost shared between the Gasification Program at the National Energy Technology Laboratory and the Biomass Power Program within the DOE's Office of Energy Efficiency and Renewable Energy.

374

Technology catalogue. Second edition  

SciTech Connect

The Department of Energy`s (DOE`s) Office of Environmental Management (EM) is responsible for remediating DOE contaminated sites and managing the DOE waste inventory in a safe and efficient manner. EM`s Office of Technology Development (OTD) supports applied research and demonstration efforts to develop and transfer innovative, cost-effective technologies to its site clean-up and waste-management programs within EM. The purpose of the Technology Catalogue is to: (a) provide performance data on OTD-developed technologies to scientists and engineers responsible for preparing Remedial Investigation/Feasibility Studies (RI/FSs) and other compliance documents for the DOE`s clean-up and waste-management programs; and (b) identify partnering and commercialization opportunities with industry, other federal and state agencies, and the academic community.

1995-04-01T23:59:59.000Z

375

Transportation technology at Sandia  

SciTech Connect

Industrial and military activities in the US produce large amounts of hazardous mixed waste, which includes both radioactive and toxic substances. The already overburdened environment is faced with the task of safely disposing of these complex wastes. A very important aspect of this effort is the safe and economical transportation of radioactive and toxic chemical wastes to projected repositories. Movement of wastes to the repository sites is accomplished by a combination of truck, rail, ship, and air. The DOE directs transportation activities including cask development technology for use in single or multimode transport. Sandia National Laboratories` Transportation Technology programs provide the technology and know-how to support DOE in achieving safe, efficient, and economical packaging and transportation of nuclear and other hazardous waste materials. This brochure describes the Transportation Technology programs and the specialized techniques and capabilities they offer to prospective users.

1994-12-31T23:59:59.000Z

376

User Aware Technology: From Inter-human Awareness to Technology-User Awareness  

Science Conference Proceedings (OSTI)

The present project explores how the development of user-aware technology may be supported by applying knowledge from research in psychology on nonverbal aspects of human activity in context. Research Area: Human-Technology Interaction, User-Aware ...

Ditte Hvas Mortensen

2009-08-01T23:59:59.000Z

377

Student Support for EIPBN 2010 Conference  

SciTech Connect

The 54th International Conference on Electron, Ion and Photon Beam Technology and Nanofabrication, 2010, held at the Egan Convention Center and Hilton in Anchorage, Alaska, June 1 to 4, 2010 was a great success in large part because financial support allowed robust participation from students. The conference brought together 444 engineers and scientists from industries and universities from all over the world to discuss recent progress and future trends. Among the emerging technologies that are within the scope of EIPBN is Nanofabrication for Energy Sources along with nanofabrication for the realization of low power integrated circuits. Every year, EIPBN provides financial support for students to attend the conference.The students gave oral and poster presentations of their research and many published peer reviewed articles in a special conference issue of the Journal of Vacuum Science and Technology B. The Department of Energy Office of Basic Energy Sciences supported 20 students from US universities with a $15,000.

Reginald C. Farrow

2011-03-11T23:59:59.000Z

378

Processing Technology  

Science Conference Proceedings (OSTI)

Aug 5, 2013... relevant polymers and hybrid nanocomposite material systems. ... technology to perform lightweight manufacturing of car components.

379

Technology Transfer  

A new search feature has been implemented, which allows searching of technology transfer information across the Department of Energy Laboratories.

380

Technology Transfer  

Science Conference Proceedings (OSTI)

... get started on understanding accessibility in elections and voting technology. ... bibliography was created by the Georgia Tech Research Institute ...

2013-09-17T23:59:59.000Z

Note: This page contains sample records for the topic "fixed support technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Technology Strategies  

Science Conference Proceedings (OSTI)

From the Book:PrefaceTechnology as the Strategic AdvantageWhen I began writing this book I struggled with the direction I wanted it to take. Is this book to be about business, technology, or even the business of technology? I ...

Cooper Smith

2001-07-01T23:59:59.000Z

382

Contracts for field projects and supporting research on enhanced oil recovery: Progress review No. 47, Quarter ending June 1986  

SciTech Connect

Progress reports are presented for field projects and supporting research for the following: chemical flooding; gas displacement; thermal recovery; resource assessment; environmental technology; and microbial technology. (AT)

Not Available

1987-07-01T23:59:59.000Z

383

Remote Technology for Facility Deactivation and Decommissioning at the Oak Ridge National Laboratory  

Science Conference Proceedings (OSTI)

The facilities at the Oak Ridge National Laboratory (ORNL) that will undergo deactivation and decommissioning (D and D) over the next several years include highly contaminated hot cell facilities, reactor facilities, process facilities, and a variety of other buildings. The D and D effort will require physical, chemical, and radiological characterization as well as decontamination, material sorting, size reduction, dismantlement, and waste removal and packaging. D and D planning for ORNL facilities includes recognizing that a significant number of the facilities contain hazards that prevent the use of safe manual D and D techniques. These hazards include seriously deteriorated structural integrity as well as very high dose rates (some in the hundreds of R/hr). The hazards also include high levels of fixed and removable radioactive contamination on facility surfaces and in equipment as well as chemically hazardous materials. Thus, manned entry may be highly restricted. In these situations, remotely operated technologies will be required to complete the necessary D and D activities, minimize dose and protect workers. To prepare to use remote technologies, it is first necessary to understand the tasks typically required to complete D and D of these facilities as well as the availability, applicability, and sustainability of previously deployed remote technologies. Technologies of specific interest included remote inspection, characterization, decontamination, and dismantlement. The Applied Research Center (ARC) at Florida International University (FIU), in partnership with NuVision Engineering (NVE, formerly AEA Technology), assessed the requirements for remotely operated technologies to support D and D at ORNL. FIU-ARC and NVE then identified existing technologies that can meet the expected requirements and performed a gap analysis between the D and D needs and currently available technologies. (authors)

Shoffner, P.A.; Lagos, L.E.; Varona, J. [Applied Research Center, Florida International University, Miami, FL (United States); Faldowski, J.A.; Vesco, D. [NuVision Engineering, Inc., Road, Mooresville, NC (United States)

2008-07-01T23:59:59.000Z

384

Energy Department Announces $3 Million to Support Clean Energy Businesses  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

$3 Million to Support Clean Energy $3 Million to Support Clean Energy Businesses and Entrepreneurs Energy Department Announces $3 Million to Support Clean Energy Businesses and Entrepreneurs January 6, 2014 - 4:20pm Addthis The Energy Department today announced $3 million to support clean energy business incubators that provide critical services to entrepreneurs and small businesses and accelerate the commercialization of clean energy technologies. The National Incubator Initiative for Clean Energy will support incubators across the country to help unleash the creative potential of America's entrepreneurs. Through these incubators, small businesses and entrepreneurs can receive important services to help successfully develop and commercialize clean energy technologies, including mentorship, business

385

Technology's Impact on Production  

Science Conference Proceedings (OSTI)

As part of a cooperative agreement with the United States Department of Energy (DOE) ?? entitled Technologys Impact on Production: Developing Environmental Solutions at the State and National Level ? ? the Interstate Oil and Gas Compact Commission (IOGCC) has been tasked with assisting state governments in the effective, efficient, and environmentally sound regulation of the exploration and production of natural gas and crude oil, specifically in relation to orphaned and abandoned wells and wells nearing the end of productive life. Project goals include: Developing (a) a model framework for prioritization and ranking of orphaned or abandoned well sites; (b) a model framework for disbursement of Energy Policy Act of 2005 funding; and (c) a research study regarding the current status of orphaned wells in the nation. Researching the impact of new technologies on environmental protection from a regulatory perspective. Research will identify and document (a) state reactions to changing technology and knowledge; (b) how those reactions support state environmental conservation and public health; and (c) the impact of those reactions on oil and natural gas production. Assessing emergent technology issues associated with wells nearing the end of productive life. Including: (a) location of orphaned and abandoned well sites; (b) well site remediation; (c) plugging materials; (d) plug placement; (e) the current regulatory environment; and (f) the identification of emergent technologies affecting end of life wells. New Energy Technologies ??Regulating Change, is the result of research performed for Tasks 2 and 3.

Amann, Rachel; Deweese, Ellis; Shipman, Deborah

2009-06-30T23:59:59.000Z

386

Reactor vessel support system  

DOE Patents (OSTI)

A reactor vessel support system includes a support ring at the reactor top supported through a box ring on a ledge of the reactor containment. The box ring includes an annular space in the center of its cross-section to reduce heat flow and is keyed to the support ledge to transmit seismic forces from the reactor vessel to the containment structure. A coolant channel is provided at the outside circumference of the support ring to supply coolant gas through the keyways to channels between the reactor vessel and support ledge into the containment space.

Golden, Martin P. (Trafford, PA); Holley, John C. (McKeesport, PA)

1982-01-01T23:59:59.000Z

387

Energy and Technology Review  

Science Conference Proceedings (OSTI)

This report discusses: The Clementine satellite, the first US satellite to the Moon in more than two decades, sent back more than 1.5 million images of the lunar surface using cameras designed and calibrated by LLNL. An LLNL-developed laser ranger provided information that will be used to construct a relief map of the Moon`s surface; and Uncertainty and the Federal Role in Science and Technology, Ralph E. Gomory was a recent participate in the Director`s Distinguished Lecturer Series at LLNL. In his lecture, he addressed some of the tensions, conflicts, and possible goals related to federal support for science and technology.

Bookless, W.A.; Quirk, W.J. [eds.

1994-06-01T23:59:59.000Z

388

Transformational Energy Technologies  

SciTech Connect

Broad Funding Opportunity Announcement Project: In 2009, ARPA-E issued an open call for the most revolutionary energy technologies to form the agencys inaugural program. The first open solicitation was open to ideas from all energy areas and focused on funding projects already equipped with strong research and development plans for their potentially high-impact technologies. The 37 projects chosen received a level of financial support that could accelerate technical progress and catalyze additional investment from the private sector. After only 2 months, ARPA-Es investment in these projects catalyzed an additional $33 million in investments.

None

2010-09-01T23:59:59.000Z

389

Energy and technology review  

SciTech Connect

The state of the laboratory address by LLNL Director Roger Batzel is summarized, and a breakdown of the laboratory funding is given. The Livermore defense-related committment is described, including the design and development of advanced nuclear weapons as well as research in inertial confinement fusion, nonnuclear ordnance, and particle beam technology. LLNL is also applying its scientific and engineering resources to the dual challenge of meeting future energy needs without degrading the quality of the biosphere. Some representative examples are given of the supporting groups vital for providing the specialized expertise and new technologies required by the laboratory's major research programs. (GHT)

Stowers, I.F.; Crawford, R.B.; Esser, M.A.; Lien, P.L.; O'Neal, E.; Van Dyke, P. (eds.)

1982-07-01T23:59:59.000Z

390

TWO SIMPLE TOOLS FOR DESIGN OF FIXED SHADES  

E-Print Network (OSTI)

been supported by the Solar Heating and Cooling Research andlevels of solar penetration during the heating and coolingtimes at which heating is required and solar gain should be

Nawrocki, Dave

2013-01-01T23:59:59.000Z

391

Supporting Organizations | National Security | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Initiatives Facilities Events and Conferences Supporting Organizations National Security Home | Science & Discovery | National Security | Supporting Organizations SHARE Supporting...

392

Vehicle Technologies Office: Ambassadors  

NLE Websites -- All DOE Office Websites (Extended Search)

Ambassadors Ambassadors Workplace Charging Challenge Clean Cities Coalitions Clean Cities logo. Clean Cities National: A network of nearly 100 Clean Cities coalitions, supported by the Vehicle Technologies Office, brings together public and private stakeholders to deploy plug-in electric vehicles, alternative and renewable fuels, idle-reduction measures, fuel economy improvements, and other petroleum reduction strategies. Clean Cities coordinators are knowledgeable about local incentives and policies for workplace charging as well as other aspects of plug-in electric vehicle community readiness. Workplace Charging Challenge Ambassadors The Workplace Charging Challenge enlists stakeholder organizations as Ambassadors to promote and support workplace charging. The directory below highlights Workplace Charging Challenge Ambassadors across the country.

393

Massive infrastructures are needed to support supercomputers  

NLE Websites -- All DOE Office Websites (Extended Search)

"Under the floor" of a supercomputer "Under the floor" of a supercomputer National Security Science magazine Latest Issue:April 2013 All Issues » submit Massive infrastructures are needed to support supercomputers Megawatts of power, millions of gallons of water, a football-field-size floor March 25, 2013 Tip of the computing iceberg The supercomputer room at Los Alamos is vast-essentially an acre. And this is just the tip of the iceberg. What's really amazing is what's under that floor. When a supercomputer covers 6,000 square feet of floor space, how do its guardians find and fix problems in only an hour? What's "under the floor" of a supercomputer? SUMMARY The infrastructure required to support a supercomputer includes megawatts of electricity to power it,millions of gallons of water to cool

394

Technology '90  

Science Conference Proceedings (OSTI)

The US Department of Energy (DOE) laboratories have a long history of excellence in performing research and development in a number of areas, including the basic sciences, applied-energy technology, and weapons-related technology. Although technology transfer has always been an element of DOE and laboratory activities, it has received increasing emphasis in recent years as US industrial competitiveness has eroded and efforts have increased to better utilize the research and development resources the laboratories provide. This document, Technology '90, is the latest in a series that is intended to communicate some of the many opportunities available for US industry and universities to work with the DOE and its laboratories in the vital activity of improving technology transfer to meet national needs. Technology '90 is divided into three sections: Overview, Technologies, and Laboratories. The Overview section describes the activities and accomplishments of the DOE research and development program offices. The Technologies section provides descriptions of new technologies developed at the DOE laboratories. The Laboratories section presents information on the missions, programs, and facilities of each laboratory, along with a name and telephone number of a technology transfer contact for additional information. Separate papers were prepared for appropriate sections of this report.

Not Available

1991-01-01T23:59:59.000Z

395

Technology Demonstrations | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Demonstrations Demonstrations Technology Demonstrations Efficient new building technologies can help meet our country's energy goals, stimulate U.S. manufacturing, create jobs, and improve the environment. However, many high-performing technologies are not readily adopted in the marketplace due to lack of information about their real-world performance. To address this gap in information, the DOE frequently supports demonstrations to assess technologies' energy performance, installation procedures, operations, and maintenance characteristics. The information from these demonstrations helps consumers make more informed decisions and helps U.S. manufacturers validate the performance of their products. Frequently Asked Questions How does DOE prioritize demonstration projects?

396

Plant Optimization Technologies | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Science & Innovation » Clean Coal » Crosscutting Research » Science & Innovation » Clean Coal » Crosscutting Research » Plant Optimization Technologies Plant Optimization Technologies The Plant Optimization Technologies Program is a diverse, scientifically oriented research and development program that addresses issues affecting the way coal is used. The program's primary emphasis is to support the development of advanced technologies that use coal with near-zero emissions. To provide this support, the program identifies scientific and technological needs and develops a basic understanding of the underlying chemical and physical processes that, unless resolved, could create a technological barrier to these new coal-based concepts. The program serves as a bridge between basic science and the fabrication and testing of new technologies. Currently researchers supported by this

397

Nuclear Proliferation Technology Trends Analysis  

SciTech Connect

A process is underway to develop mature, integrated methodologies to address nonproliferation issues. A variety of methodologies (both qualitative and quantitative) are being considered. All have one thing in common, a need for a consistent set of proliferation related data that can be used as a basis for application. One approach to providing a basis for predicting and evaluating future proliferation events is to understand past proliferation events, that is, the different paths that have actually been taken to acquire or attempt to acquire special nuclear material. In order to provide this information, this report describing previous material acquisition activities (obtained from open source material) has been prepared. This report describes how, based on an evaluation of historical trends in nuclear technology development, conclusions can be reached concerning: (1) The length of time it takes to acquire a technology; (2) The length of time it takes for production of special nuclear material to begin; and (3) The type of approaches taken for acquiring the technology. In addition to examining time constants, the report is intended to provide information that could be used to support the use of the different non-proliferation analysis methodologies. Accordingly, each section includes: (1) Technology description; (2) Technology origin; (3) Basic theory; (4) Important components/materials; (5) Technology development; (6) Technological difficulties involved in use; (7) Changes/improvements in technology; (8) Countries that have used/attempted to use the technology; (9) Technology Information; (10) Acquisition approaches; (11) Time constants for technology development; and (12) Required Concurrent Technologies.

Zentner, Michael D.; Coles, Garill A.; Talbert, Robert J.

2005-10-04T23:59:59.000Z

398

Building Technologies Office: Technology Research, Standards...  

NLE Websites -- All DOE Office Websites (Extended Search)

to someone by E-mail Share Building Technologies Office: Technology Research, Standards, and Codes in Emerging Technologies on Facebook Tweet about Building Technologies...

399

Detectors - Instrument Support | ORNL Neutron Sciences  

NLE Websites -- All DOE Office Websites (Extended Search)

Detectors Detectors Detectors The detector design group, led by Yacouba Diawara is responsible for supporting the design of HFIR and SNS instruments by developing the necessary infrastructure and acquiring detector components that will be used to complete the functionality of the instruments. The group's mission also includes supporting detector research and development (R&D) for the various instruments and their different needs. The support effort for instrument design entails monitoring detector development worldwide as neutron facilities around the globe are getting upgraded and adopting the newest technologies. Detector group technician Ted Visscher inspects a parahedreal lens on an Anger camera Detector group technician Ted Visscher inspects a parahedreal lens on an

400

Available Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

6 News Stories (and older) 6 News Stories (and older) 12.21.2005___________________________________________________________________ Genzyme acquires gene therapy technology invented at Berkeley Lab. Read more here. 07.19.2005 _________________________________________________________________ Symyx, a start up company using Berkeley Lab combinatorial chemistry technology licensed by the Technology Transfer Department and developed by Peter Schultz and colleagues in the Materials Sciences Division, will be honored with Frost & Sullivan's 2005 Technology Leadership Award at their Excellence in Emerging Technologies Awards Banquet for developing enabling technologies and methods to aid better, faster and more efficient R&D. Read more here. 07.11.2005 _________________________________________________________________ Nanosys, Inc., a Berkeley Lab startup, is among the solar nanotech companies investors along Sand Hill Road in Menlo Park hope that thinking small will translate into big profits. Read more here.

Note: This page contains sample records for the topic "fixed support technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Supported microporous ceramic membranes  

DOE Patents (OSTI)

A method for permformation of microporous ceramic membranes onto a porous support includes placing a colloidal suspension of metal or metal oxide particles on one side of the porous support and exposing the other side of the porous support to a drying stream of gas or a reactive gas stream so that the particles are deposited on the drying side of the support as a gel. The gel so deposited can be sintered to form a supported ceramic membrane useful for ultrafiltration, reverse osmosis, or molecular sieving having mean pore sizes less than 100 Angstroms.

Webster, Elizabeth (Madison, WI); Anderson, Marc (Madison, WI)

1993-01-01T23:59:59.000Z

402

Supported microporous ceramic membranes  

DOE Patents (OSTI)

A method for the formation of microporous ceramic membranes onto a porous support includes placing a colloidal suspension of metal or metal oxide particles on one side of the porous support and exposing the other side of the porous support to a drying stream of gas or a reactive gas stream so that the particles are deposited on the drying side of the support as a gel. The gel so deposited can be sintered to form a supported ceramic membrane useful for ultrafiltration, reverse osmosis, or molecular sieving having mean pore sizes less than 100 Angstroms. 4 figures.

Webster, E.; Anderson, M.

1993-12-14T23:59:59.000Z

403

Technology's Impact on Production  

SciTech Connect

As part of a cooperative agreement with the United States Department of Energy (DOE) - entitled Technology's Impact on Production: Developing Environmental Solutions at the State and National Level - the Interstate Oil and Gas Compact Commission (IOGCC) has been tasked with assisting state governments in the effective, efficient, and environmentally sound regulation of the exploration and production of natural gas and crude oil, specifically in relation to orphaned and abandoned wells and wells nearing the end of productive life. Project goals include: (1) Developing (a) a model framework for prioritization and ranking of orphaned or abandoned well sites; (b) a model framework for disbursement of Energy Policy Act of 2005 funding; and (c) a research study regarding the current status of orphaned wells in the nation. (2) Researching the impact of new technologies on environmental protection from a regulatory perspective. Research will identify and document (a) state reactions to changing technology and knowledge; (b) how those reactions support state environmental conservation and public health; and (c) the impact of those reactions on oil and natural gas production. (3) Assessing emergent technology issues associated with wells nearing the end of productive life. Including: (a) location of orphaned and abandoned well sites; (b) well site remediation; (c) plugging materials; (d) plug placement; (e) the current regulatory environment; and (f) the identification of emergent technologies affecting end of life wells. New Energy Technologies - Regulating Change, is the result of research performed for Tasks 2 and 3.

Rachel Amann; Ellis Deweese; Deborah Shipman

2009-06-30T23:59:59.000Z

404

NETL: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

projects are designed to: enhance domestic oil and natural gas supplies through advanced exploration and production technology; examine water related concerns; investigate...

405

Technology Update  

Science Conference Proceedings (OSTI)

A Novel Solvent Extraction Process With Bottom Gas Injection for Liquid Waste ... Membrane Technology for Treatment of Wastes Containing Dissolved Metals:...

406

Microwave Technology  

Science Conference Proceedings (OSTI)

Oct 20, 2011 ... These wastes are found in the market. ... Cherian1; Michael Kirksey1; Sandwip Dey2; 1Spheric Technologies Inc; 2Arizona State University

407

Transmission Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

electronically (shift-by-wire) and performed by a hydraulic system or electric motor. In addition, technologies can be employed to make the shifting process smoother than...

408

HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY  

SciTech Connect

The programming and website for the advanced Technology Information System (TIS) have been completed. Over and above the LSDDP-TIS, the new system provides information on DOE's baseline technologies, technology data contained in DOE's databases, technologies assessed at FIU-HCET Technology Assessment Program (TAP), as well as links to other selected D&D sites with valuable technology information. The new name for the website is Gateway for Environmental Technology (GET). A super-vacuum type blasting system was tested for decontamination of 12-in pipe internal surfaces. The system operates on compressed air and propels grit media at high speed at wall surfaces. It is equipped with a vacuum system for collecting grit, dust, and debris. This technology was selected for further development. The electret ion chamber (EIC) system for measurement of alpha contamination on surfaces has been calibrated and is ready for demonstration and deployment. FIU-HCET is working with representatives from Fernald, Oak Ridge, Rocky Flats, and Savannah River to procure a demonstration and deployment site. Final arrangements are ongoing for the mock-up design for the glove box and tank size reduction technology assessments, including designing of support bases for tanks, a piping support system, and a mobilization plan for glove boxes and tanks from storage site to the PermaCon.

M.A. Ebadian

1999-05-31T23:59:59.000Z

409

HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY  

SciTech Connect

The programming and website for the advanced Technology Information System (TIS) have been completed. Over and above the LSDDP-TIS, the new system provides information on DOE's baseline technologies, technology data contained in DOE's databases, technologies assessed at FIU-HCET Technology Assessment Program (TAP), as well as links to other selected D&D sites with valuable technology information. The new name for the website is Gateway for Environmental Technology (GET). A super-vacuum type blasting system was tested for decontamination of 12-in pipe internal surfaces. The system operates on compressed air and propels grit media at high speed at wall surfaces. It is equipped with a vacuum system for collecting grit, dust, and debris. This technology was selected for further development. The electret ion chamber (EIC) system for measurement of alpha contamination on surfaces has been calibrated and is ready for demonstration and deployment. FIU-HCET is working with representatives from Fernald, Oak Ridge, Rocky Flats, and Savannah River to procure a demonstration and deployment site. Final arrangements are ongoing for the mock-up design for the glove box and tank size reduction technology assessments, including designing of support bases for tanks, a piping support system, and a mobilization plan for glove boxes and tanks from storage site to the PermaCon.

M.A. Ebadian

1999-05-31T23:59:59.000Z

410

Demonstration of Natural Gas Engine Driven Air Compressor Technology at Department of Defense Industrial Facilities  

E-Print Network (OSTI)

Recent downsizing and consolidation of Department of Defense (DOD) facilities provides an opportunity to upgrade remaining facilities with more efficient and less polluting equipment. Use of air compressors by the DOD is widespread and the variety of tools and machinery that operate on compressed air is increasing. The energy cost of operating a natural gas engine-driven air compressor (NGEDAC) is usually lower than the cost of operating an electric-driven air compressor. Initial capital costs are offset by differences in prevailing utility rates, efficiencies of partial load operation, reductions in peak demand, heat recovery, and avoiding the cost of back-up generators. Natural gas, a clean-burning fuel, is abundant and readily available. In an effort to reduce its over-all environmental impact and energy consumption, the U.S. Army plans to apply NGEDAC technology in support of fixed facilities compressed air systems. Site assessment and demonstration results are presented in this paper.

Lin, M.; Aylor, S. W.; Van Ormer, H.

2002-04-01T23:59:59.000Z

411

M28 Fixed wing transport aircraft cost reduction  

E-Print Network (OSTI)

The M28 is a Polish short-takeoff-and-landing (STOL) light cargo aircraft developed in 1984 and currently built by PZL Mielec, a subsidiary of United Technology Corporation (UTC). There has been renewed interest in the ...

Xia, YuXin, M.B.A. Sloan School of Management

2011-01-01T23:59:59.000Z

412

Supporting collaborative help for individualized use  

Science Conference Proceedings (OSTI)

In this paper, we seek to advance the research around utilizing collaborative help for supporting individualized use of technologies. We do this by shedding light on the ways that users of MythTV, a highly flexible open-source software system for home ... Keywords: appropriation, collaborative help, configuration, individualized use, mythtv, pervasive systems, tailorability

Jina Huh; Mark W. Newman; Mark S. Ackerman

2011-05-01T23:59:59.000Z

413

Effective evacuation support using IT tools  

Science Conference Proceedings (OSTI)

The contribution deals with the possibilities of using information technologies as supporting tools to make the process of evacuation of populations from endangered areas more effective. The major shift from the present state should be done above all ... Keywords: FLOREON+, SFVI, electronic sirens, evacuation, flood, protection of population

Pavel Senovsky; Ales Bernatik; Michail Senovsky

2011-12-01T23:59:59.000Z

414

Technological distinctive competencies and organizational learning: Effects on organizational innovation to improve firm performance  

Science Conference Proceedings (OSTI)

This paper analyzes how top management support of technology influences the generation of technological skills, technological distinctive competencies and organizational learning. The research also examines the effects of technological distinctive competencies ... Keywords: O32, O33, Organizational innovation, Organizational learning, Organizational performance, Q55, Technological distinctive competencies, Top management support

MarA Teresa BolVar-Ramos; VCtor J. GarcA-Morales; EncarnaciN GarcA-SNchez

2012-07-01T23:59:59.000Z

415

Integrated operation of a pressurized fixed-bed gasifier, hot gas desulfurization system, and turbine simulator  

Science Conference Proceedings (OSTI)

The overall objective of the General Electric Hot Gas Cleanup (HGCU) Program is to develop a commercially viable technology to remove sulfur, particulates, and halogens from a high-temperature fuel gas stream using a moving bed, regenerable mixed metal oxide sorbent based process. The HGCU Program is based on the design and demonstration of the HGCU system in a test facility made up of a pilot-scale fixed bed gasifier, a HGCU system, and a turbine simulator in Schenectady, NY, at the General Electric Research and Development Center. The objectives of the turbine simulator testing are (1) to demonstrate the suitability of fuel gas processed by the HGCU system for use in state-of-the-art gas turbines firing at 2,350 F rotor inlet temperature and (2) to quantify the combustion characteristics and emissions on low-Btu fuel gas. The turbine simulator program also includes the development and operation of experimental combustors based on the rich-quench-lean concept (RQL) to minimize the conversion of ammonia and other fuel-bound nitrogen species to NO{sub x} during combustion. The HGCU system and turbine simulator have been designed to process approximately 8,000 lb/hr of low heating value fuel gas produced by the GE fixed bed gasifier. The HGCU system has utilized several mixed metal oxide sorbents, including zinc ferrite, zinc titanate, and Z-Sorb, with the objective of demonstrating good sulfur removal and mechanical attrition resistance as well as economic cost characteristics. Demonstration of halogen removal and the characterization of alkali and trace metal concentrations in the fuel gas are subordinate objectives of the overall program. This report describes the results of several long-duration pilot tests.

Bevan, S.; Ayala, R.E.; Feitelberg, A.; Furman, A.

1995-11-01T23:59:59.000Z

416

Vehicle Technologies Office: Lubricants  

NLE Websites -- All DOE Office Websites (Extended Search)

Lubricants Lubricants As most vehicles are on the road for more than 15 years before they are retired, investigating technologies that will improve today's vehicles is essential. Because 11.5 percent of fuel energy is consumed by engine friction, decreasing this friction through lubricants can lead to substantial improvements in the fuel economy of current vehicles, without needing to wait for the fleet to turn over. In fact, a 1 percent fuel savings in the existing vehicle fleet possible through lubricants could save 97 thousand barrels of oil a day or $3.5 billion a year. Because of these benefits, the Vehicle Technologies Office supports research on lubricants that can improve the efficiency of internal combustion engine vehicles, complementing our work on advanced combustion engine technology.

417

Vehicle Technologies Office: Benchmarking  

NLE Websites -- All DOE Office Websites (Extended Search)

Benchmarking Benchmarking Research funded by the Vehicle Technologies Office produces a great deal of valuable data, but it is important to compare those research results with similar work done elsewhere in the world. Through laboratory testing, researchers can compare vehicles and components to validate models, support technical target-setting, and provide data to help guide technology development tasks. Benchmarking activities fall into two primary areas: Vehicle and component testing, in which researchers test and analyze emerging technologies obtained from sources throughout the world. The results are used to continually assess program efforts. Model validation, in which researchers use test data to validate the accuracy of vehicle and component computer models including: overall measures such as fuel economy, state-of-charge energy storage across the driving cycle, and transient component behavior, such as fuel rate and torque.

418

(Technical and engineering support for the Office of Industrial Programs)  

DOE Green Energy (OSTI)

As of April 19, 1991, technical, operational and analytic support and assistance to the offices and divisions of the Office of Renewable Energy, under contract DE-AC01-86CE30844 was completed. The overall work effort, initiated February 20, 1986, was characterized by timely, comprehensive, high quality, professional responsiveness to a broad range of renewable energy program operational support requirements. These are no instances of failure to respond, nor unacceptable response, during the five-year period. The technology program areas covered are Solar Buildings Technology, Wind Energy Technology, Photovoltaic Energy Technology, Geothermal Energy Technology, Biofuels and Municipal Waste Technology, Solar Thermal Technology, Hydropower Energy Technology, Ocean Energy Technology, and Electric Energy Systems and Energy Storage. The analytical and managerial support provided to the office and staff of the Deputy Assistant Secretary for Renewable Energy enabled a comprehensive evaluation of program and policy alternatives, and the selection and execution of appropriate courses of action from amongst those alternatives. Largely through these means the Office has been able to maintain continuity and a meaningful program thrust through the vacillations of policies and budgets that it has experienced over that it has experienced over the past five years. Appended are summaries of support activities within each of the individual technology program areas, as well as a complete listing of all project deliverables and due-dates for each submittal under the contract.

Not Available

1991-01-01T23:59:59.000Z

419

Vehicle Technologies Office: Deployment  

NLE Websites -- All DOE Office Websites (Extended Search)

Deployment Deployment Our nation's energy security depends on the efficiency of our transportation system and on which fuels we use. Transportation in the United States already consumes much more oil than we produce here at home and the situation is getting worse. Domestic oil production has been dropping steadily for over 20 years, and experts predict that by 2025, about 70% of our oil will be imported. The U.S. Department of Energy's (DOE's) Vehicle Technologies Office supports research and development (R&D) that will lead to new technologies that reduce our nation's dependence on imported oil, further decrease vehicle emissions, and serve as a bridge from today's conventional powertrains and fuels to tomorrow's hydrogen-powered hybrid fuel cell vehicles. The Vehicle Technologies Office also supports implementation programs that help to transition alternative fuels and vehicles into the marketplace, as well as collegiate educational activities to help encourage engineering and science students to pursue careers in the transportation sector. Following are some of the activities that complement the Vehicle Technologies Office's mission.

420

Metering Technology  

Science Conference Proceedings (OSTI)

Utilities are looking to replace meters that only measure kilowatt-hours with advanced meters with greater features and functions. This White Paper describes the smart metering technology that is already available or will be available in the near future. It also provides a high-level overview of the wired and wireless communication technologies used in the metering industry.

2008-06-20T23:59:59.000Z

Note: This page contains sample records for the topic "fixed support technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

FLEXIBLE REMUNERATION For Continuous and Fixed Term Employees  

E-Print Network (OSTI)

................................................................................ 19 10.6 Fuel Cards for: · Superannuation Contributions Surcharge · H.E.C.S repayments · Medicare Levy Surcharge · Child Support obligations · Terminations Payments Surcharge #12;FLEXIBLE REMUNERATION PACKAGING MANUAL Version 2

422

Causality-based function network for identifying technological analogy  

Science Conference Proceedings (OSTI)

This paper suggests a cause-and-effect function network (CEFN) to support technology innovation in a direct way. To support this CEFN, a cause-and-effect relationship, a function model and an ontological approach are proposed. In the CEFN, technologies ... Keywords: Cause-and-effect relationship, Function, Ontology, Problem solving, Technology innovation, The 40 inventive principles

Hongbin Kim; Kwangsoo Kim

2012-09-01T23:59:59.000Z

423

Technology Search Results | Brookhaven Technology ...  

BSA 11-30: Enhanced Alkane production by Aldehyde Decarbonylase Fusion Constructs; BSA 12-36: Oil Accumulation in Plant Leaves; Find a Technology.

424

Technology Search Results | Brookhaven Technology ...  

There are 9 technologies tagged "cancer". BSA 01-02: ... a limited-liability company founded by the Research Foundation for the State University of ...

425

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

parts Brazing large complex parts The joining and heat-treating technologies in the Thin Film, Vacuum, & Packaging department include brazing, heat-treating, diffusion...

426

DOE Announces Up to $7.5 Million in Advanced Technology Research...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

development projects in support of water power technology. DOE plans to award industry-led partnerships to research, develop andor field test advanced water power technologies...

427

Industry Recruitment/Support | Open Energy Information  

Open Energy Info (EERE)

Recruitment/Support Recruitment/Support Jump to: navigation, search To promote economic development and the creation of jobs, some states offer financial incentives to recruit or cultivate the manufacturing and development of renewable energy systems and equipment. These incentives commonly take the form of tax credits, tax exemptions and grants. In some cases, the amount of the incentive depends on the amount of eligible equipment that a company manufactures. Most of these incentives apply to several renewable energy technologies, but a few states target specific technologies, such as wind or solar. These incentives are usually designed as temporary measures to support industries in their early years, and they commonly include a sunset provision to encourage the industries to become

428

DOE Seeks Proposals for Support Services at Denver Federal Center |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Seeks Proposals for Support Services at Denver Federal Center Seeks Proposals for Support Services at Denver Federal Center DOE Seeks Proposals for Support Services at Denver Federal Center January 9, 2014 - 12:00pm Addthis Media Contact Bill Taylor, 803-952-8564 bill.taylor@srs.gov Cincinnati - The Department of Energy today issued a Request for Proposals (RFP) for Technical and Administrative Support Services for Building 55 at Denver Federal Center, Lakewood, Colorado. The RFP proposes a Fixed-Price approach with an Indefinite Delivery/Indefinite Quantity contract line item for potential addition work on records classification and declassification. The estimated price for the support services is approximately $5-10 million. The scope of work includes a range of technical and administrative services to assist in the operations and maintenance of Building 55 at the Denver

429

SF6432-FP (02-01-12) Firm Fixed Price  

NLE Websites -- All DOE Office Websites (Extended Search)

2/01/12 2/01/12 Page 1 of 21 Printed copies of this document are uncontrolled. Retrieve latest version electronically. SANDIA CORPORATION SF 6432-FP (02/01/12) Section II STANDARD TERMS AND CONDITIONS FOR FIRM-FIXED PRICE CONTRACTS THE FOLLOWING CLAUSES APPLY TO THIS CONTRACT AS INDICATED UNLESS SPECIFICALLY DELETED, OR EXCEPT TO THE EXTENT THEY ARE SPECIFICALLY SUPPLEMENTED OR AMENDED IN WRITING IN THE COVER PAGE OR SECTION I. (CTRL+CLICK ON A LINK BELOW TO ADVANCE DIRECTLY TO THAT SECTION) ACCEPTANCE OF TERMS AND CONDITIONS (Ts&Cs) APPLICABLE LAW ASSIGNMENT BANKRUPTCY DEFINITIONS DISPUTES EXCESS FREIGHT CHARGES EXCUSABLE DELAYS EXPORT CONTROL EXTRAS AND VARIATION IN QUANTITY GOVERNMENT PROPERTY MATERIAL AND EQUIPMENT MANUFACTURING AND TESTING STANDARDS

430

Breakout Items Action Items Fixed Price Contracting Topic Group Summaries  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Albuquerque Meeting - July 1997 Albuquerque Meeting - July 1997 Breakout Items Action Items Fixed Price Contracting Topic Group Summaries TOPIC GROUP SUMMARIES Routing * Group reviewed and approved fourth draft of working paper "Routing Issues Related to U.S. Department of Energy Radioactive Materials Transportation: Discussion and Analysis" * Group submitted working paper and draft list of "Stakeholder Recommendations" to TEC/WG and DOE Group reached consensus on three major routing-related issues: * DOE should develop standardized, cooperative approach to route selection * DOE needs to involve all stakeholders * DOE should submit final version of Group's working paper to other federal entities Future topics for consideration: * routing issues relevant to tribal entities and local jurisdictions

431

MRST partons generated in a fixed-flavor scheme.  

E-Print Network (OSTI)

ar X iv :h ep -p h/ 06 03 14 3v 1 2 0 M ar 2 00 6 IPPP/06/13 DCPT/06/26 Cavendish-HEP-2006/07 MRST partons generated in a fixed-flavour scheme A.D. Martina, W.J. Stirlinga and R.S. Thornec,1 a Institute for Particle Physics Phenomenology... of such an inconsistency on a physical quantity is provided by the evolution of FL. At leading order the gluon contribution to FL is FL = ?S C1Lg ? g, (2) 2We thank Eric Laenen for clarifying this point. 1 3-Flavour Gluon -4 -2 0 2 4 6 10 -5 10 -4 10 -3 10 -2 10 -1 1 x g(x...

Martin, A D; Stirling, W James; Thorne, Robert S

432

Contracts for field projects and supporting research on enhanced oil recovery. Progress review No. 70, quarter ending March 31, 1992  

Science Conference Proceedings (OSTI)

Accomplishments for the past quarter are presented for the following tasks: chemical flooding--supporting research; gas displacement--supporting research; thermal recovery--supporting research; geoscience technology; resource assessment technology; and microbial technology. A list of available publication is also provided.

Not Available

1993-03-01T23:59:59.000Z

433

Designing Technology as an Embedded Resource for Troubleshooting  

Science Conference Proceedings (OSTI)

In this paper we describe a number of technologies which we designed to provide support for customers troubleshooting problems with their office devices. The technologies aim to support both self-conducted and expert-supported troubleshooting and to ... Keywords: device troubleshooting, diagnostics, embedded systems, ethnography, ethnomethodology, help systems, immediate and remote help-giving, situated action, socio-technical assemblies, work practice studies

Stefania Castellani; Antonietta Grasso; Jacki O'Neill; Frederic Roulland

2009-06-01T23:59:59.000Z

434

Configuring VRF Support  

E-Print Network (OSTI)

Virtual Route Forwarding (VRF) divides a physical router into multiple logical routers, each having its own set of interfaces and routing and forwarding tables. VRF support in voice networks can be used to split Cisco Unified Communications Manager Express (Cisco Unified CME) into multiple virtual systems for SIP and SCCP endpoints and TAPI-based client applications and softphones on your PC. Finding Feature Information Your software release may not support all the features documented in this module. For the latest feature information and caveats, see the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the Feature Information for VRF Support section on page 1569. Use Cisco Feature Navigator to find information about platform support and Cisco IOS and Catalyst OS software image support. To access Cisco Feature Navigator, go to

unknown authors

2008-01-01T23:59:59.000Z

435

Cryogenic support system  

DOE Patents (OSTI)

A support system is disclosed for restraining large masses at very low or cryogenic temperatures. The support system employs a tie bar that is pivotally connected at opposite ends to an anchoring support member and a sliding support member. The tie bar extends substantially parallel to the longitudinal axis of the cold mass assembly, and comprises a rod that lengthens when cooled and a pair of end attachments that contract when cooled. The rod and end attachments are sized so that when the tie bar is cooled to cryogenic temperature, the net change in tie bar length is approximately zero. Longitudinal force directed against the cold mass assembly is distributed by the tie bar between the anchoring support member and the sliding support member. 7 figs.

Nicol, T.H.; Niemann, R.C.; Gonczy, J.D.

1988-11-01T23:59:59.000Z

436

Vehicle Technologies Office: Graduate Automotive Technology Education  

NLE Websites -- All DOE Office Websites (Extended Search)

Deployment Deployment Site Map Printable Version Share this resource Send a link to Vehicle Technologies Office: Graduate Automotive Technology Education (GATE) to someone by E-mail Share Vehicle Technologies Office: Graduate Automotive Technology Education (GATE) on Facebook Tweet about Vehicle Technologies Office: Graduate Automotive Technology Education (GATE) on Twitter Bookmark Vehicle Technologies Office: Graduate Automotive Technology Education (GATE) on Google Bookmark Vehicle Technologies Office: Graduate Automotive Technology Education (GATE) on Delicious Rank Vehicle Technologies Office: Graduate Automotive Technology Education (GATE) on Digg Find More places to share Vehicle Technologies Office: Graduate Automotive Technology Education (GATE) on AddThis.com...

437

Building Technologies Office: Emerging Technologies Activities  

NLE Websites -- All DOE Office Websites (Extended Search)

Emerging Technologies Emerging Technologies Activities to someone by E-mail Share Building Technologies Office: Emerging Technologies Activities on Facebook Tweet about Building Technologies Office: Emerging Technologies Activities on Twitter Bookmark Building Technologies Office: Emerging Technologies Activities on Google Bookmark Building Technologies Office: Emerging Technologies Activities on Delicious Rank Building Technologies Office: Emerging Technologies Activities on Digg Find More places to share Building Technologies Office: Emerging Technologies Activities on AddThis.com... About Take Action to Save Energy Partner with DOE Activities Appliances Research Building Envelope Research Windows, Skylights, & Doors Research Space Heating & Cooling Research Water Heating Research

438

Vehicle Technologies Office: Vehicle Technologies Office Recognizes  

NLE Websites -- All DOE Office Websites (Extended Search)

Vehicle Technologies Vehicle Technologies Office Recognizes Outstanding Researchers to someone by E-mail Share Vehicle Technologies Office: Vehicle Technologies Office Recognizes Outstanding Researchers on Facebook Tweet about Vehicle Technologies Office: Vehicle Technologies Office Recognizes Outstanding Researchers on Twitter Bookmark Vehicle Technologies Office: Vehicle Technologies Office Recognizes Outstanding Researchers on Google Bookmark Vehicle Technologies Office: Vehicle Technologies Office Recognizes Outstanding Researchers on Delicious Rank Vehicle Technologies Office: Vehicle Technologies Office Recognizes Outstanding Researchers on Digg Find More places to share Vehicle Technologies Office: Vehicle Technologies Office Recognizes Outstanding Researchers on AddThis.com...

439

Crystalline titanate catalyst supports  

DOE Patents (OSTI)

A series of new crystalline titanates (CT) are shown to have considerable potential as catalyst supports. For Pd supported catalyst, the catalytic activity for pyrene hydrogenation was substantially different depending on the type of CT, and one was substantially more active than Pd on hydrous titanium oxide (HTO). For 1-hexene hydrogenation the activities of the new CTs were approximately the same as for the hydrous metal oxide supports.

Anthony, Rayford G. (Bryan, TX); Dosch, Robert G. (Albuquerque, NM)

1993-01-01T23:59:59.000Z

440

Conduction cooled tube supports  

DOE Patents (OSTI)

In boilers, process tubes are suspended by means of support studs that are in thermal contact with and attached to the metal roof casing of the boiler and the upper bend portions of the process tubes. The support studs are sufficiently short that when the boiler is in use, the support studs are cooled by conduction of heat to the process tubes and the roof casing thereby maintaining the temperature of the stud so that it does not exceed 1400.degree. F.

Worley, Arthur C. (Mt. Tabor, NJ); Becht, IV, Charles (Morristown, NJ)

1984-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "fixed support technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Crystalline titanate catalyst supports  

DOE Patents (OSTI)

A series of new crystalline titanates (CT) are shown to have considerable potential as catalyst supports. For Pd supported catalyst, the catalytic activity for pyrene hydrogenation was substantially different depending on the type of CT, and one was substantially more active than Pd on hydrous titanium oxide (HTO). For 1-hexene hydrogenation the activities of the new CTs were approximately the same as for the hydrous metal oxide supports.

Anthony, R.G.; Dosch, R.G.

1991-12-31T23:59:59.000Z

442

Crystalline titanate catalyst supports  

DOE Patents (OSTI)

A series of new crystalline titanates (CT) are shown to have considerable potential as catalyst supports. For Pd supported catalyst, the catalytic activity for pyrene hydrogenation was substantially different depending on the type of CT, and one was substantially more active than Pd on hydrous titanium oxide (HTO). For 1-hexene hydrogenation the activities of the new CTs were approximately the same as for the hydrous metal oxide supports.

Anthony, R.G.; Dosch, R.G.

1993-01-05T23:59:59.000Z

443

Nested Fixed Depth Fluidic Sampler and At Tank Analysis System Deployment Strategy and Plan  

Science Conference Proceedings (OSTI)

Under the Hanford Site River Protection Project (RPP) privatization strategy, the U.S. Department of Energy (DOE) Office of River Protection (ORP) requires the CH2M Hill Hanford Group, Inc. (CHG) to supply tank waste to the privatization contractor, BNFL Inc. (BNFL), for separation and/or treatment and immobilization (vitrification). Three low-activity waste (LAW) specification envelopes represent the range of liquid waste types in the large, Hanford Site underground waste storage tanks. The CHG also is expected to supply high-level waste (HLW) separation and/or treatment and disposal. The HLW envelope is an aqueous slurry of insoluble suspended solids (sludge). The Phase 1 demonstration will extend over 24 years (1996 through 2019) and will be used to resolve technical uncertainties. About one-tenth of the total Hanford Site tank waste, by mass, will be processed during this period. This document provides a strategy and top-level implementation plan for demonstrating and deploying an alternative sampling technology. The alternative technology is an improvement to the current grab sampling and core sampling approaches that are planned to be used to support the RPP privatization contract. This work also includes adding the capability for some at-tank analysis to enhance the potential of this new technology to meet CHG needs. The first application is to LAW and HLW feed staging for privatization; the next is to support cross-site waste transfer from 200 West Area tanks.

REICH, F.R.

2000-02-01T23:59:59.000Z

444

Vessel structural support system  

SciTech Connect

Vessel structural support system for laterally and vertically supporting a vessel, such as a nuclear steam generator having an exterior bottom surface and a side surface thereon. The system includes a bracket connected to the bottom surface. A support column is pivotally connected to the bracket for vertically supporting the steam generator. The system also includes a base pad assembly connected pivotally to the support column for supporting the support column and the steam generator. The base pad assembly, which is capable of being brought to a level position by turning leveling nuts, is anchored to a floor. The system further includes a male key member attached to the side surface of the steam generator and a female stop member attached to an adjacent wall. The male key member and the female stop member coact to laterally support the steam generator. Moreover, the system includes a snubber assembly connected to the side surface of the steam generator and also attached to the adjacent wall for dampening lateral movement of the steam generator. In addition, the system includes a restraining member of "flat" attached to the side surface of the steam generator and a bumper attached to the adjacent wall. The flat and the bumper coact to further laterally support the steam generator.

Jenko, James X. (N. Versailles, PA); Ott, Howard L. (Kiski Twp., Allegheny County, PA); Wilson, Robert M. (Plum Boro, PA); Wepfer, Robert M. (Murrysville, PA)

1992-01-01T23:59:59.000Z

445

Documents: NEPA Support  

NLE Websites -- All DOE Office Websites (Extended Search)

Search Documents: Search PDF Documents View a list of all documents NEPA Support PDF Icon Depleted Uranium Hexafluoride Management Program: Data Compilation for the Paducah Site...

446

PETSc: Features: Thread support  

NLE Websites -- All DOE Office Websites (Extended Search)

Thread support Home Download Features Component Details Diagram GPUs Threads Documentation ApplicationsPublications Miscellaneous External Software Developers Site PETSc algebraic...

447

Sustainability Support - Events  

NLE Websites -- All DOE Office Websites (Extended Search)

Right Tab Left Tab VIDEOS Right Tab Left Tab EVENTS Environmental Protection, Sustainability Support & Corporate Safety Analysis HS-20 Home Mission & Functions Office of...

448

Practical Models Supporting  

Practical Models Supporting Remediation of Chlorinated Solvents Training Course. The Center for Sustainable Soil and Groundwater Solutions holds training courses on ...

449

Contracts for field projects and supporting research on enhanced oil recovery, July--September 1992. Progress review No. 72, quarter ending September 30, 1992  

Science Conference Proceedings (OSTI)

Accomplishments for the past quarter are presented for the following tasks: Chemical flooding--supporting research; gas displacement--supporting research; thermal recovery--supporting research; geoscience technology; resource assessment technology; microbial technology; and novel technology. A list of available publication is also provided.

Not Available

1993-09-01T23:59:59.000Z

450

Contracts for field projects and supporting research on enhanced oil recovery, October--December 1992. Progress review No. 73, quarter ending December 31, 1992  

Science Conference Proceedings (OSTI)

Accomplishments for this quarter ending December 31, 1992 are presented for the following tasks: chemical flooding--supporting research; gas displacement--supporting research; thermal recovery--supporting research; geoscience technology; resource assessment technology; microbial technology; reservoir classes; and novel technology.

Not Available

1993-12-01T23:59:59.000Z

451

Contracts for field projects and supporting research on enhanced oil recovery. Progress review No. 41, quarter ending December 31, 1984  

SciTech Connect

Progress reports are presented for field tests and supporting research for the following: chemical flooding; gas displacement; thermal recovery/heavy oil; resource assessment technology; extraction technology; environmental technology; and microbial enhanced oil recovery.

Linville, B. (ed.)

1985-07-01T23:59:59.000Z

452

Contracts for field projects and supporting research on enhanced oil recovery. Progress Review No. 42, quarter ending March 31, 1985  

Science Conference Proceedings (OSTI)

Progress reports are presented for field tests and supporting research for the following: chemical flooding; gas displacement; thermal recovery/heavy oil; resource assessment technology; extraction technology; environmental technology; and microbial enhanced oil recovery.

Linville, B. (ed.)

1985-11-01T23:59:59.000Z

453

Contracts for field projects and supporting research on enhanced oil recovery. Progress review No. 40, quarter ending September 30, 1984  

SciTech Connect

Progress reports are presented for field tests and supporting research for the following: chemical flooding; gas displacement; thermal recovery/heavy oil; resource assessment technology; extraction technology; and microbial technology.

Linville, B. (ed.)

1985-05-01T23:59:59.000Z

454

Marine & hydrokinetic technology development.  

DOE Green Energy (OSTI)

The Wind and Water Power Program supports the development of marine and hydrokinetic devices, which capture energy from waves, tides, ocean currents, the natural flow of water in rivers, and marine thermal gradients, without building new dams or diversions. The program works closely with industry and the Department of Energy's national laboratories to advance the development and testing of marine and hydrokinetic devices. In 2008, the program funded projects to develop and test point absorber, oscillating wave column, and tidal turbine technologies. The program also funds component design, such as techniques for manufacturing and installing coldwater pipes critical for ocean thermal energy conversion (OTEC) systems. Rigorous device testing is necessary to validate and optimize prototypes before beginning full-scale demonstration and deployment. The program supports device testing by providing technology developers with information on testing facilities. Technology developers require access to facilities capable of simulating open-water conditions in order to refine and validate device operability. The program has identified more than 20 tank testing operators in the United States with capabilities suited to the marine and hydrokinetic technology industry. This information is available to the public in the program's Hydrodynamic Testing Facilities Database. The program also supports the development of open-water, grid-connected testing facilities, as well as resource assessments that will improve simulations done in dry-dock and closed-water testing facilities. The program has established two university-led National Marine Renewable Energy Centers to be used for device testing. These centers are located on coasts and will have open-water testing berths, allowing researchers to investigate marine and estuary conditions. Optimal array design, development, modeling and testing are needed to maximize efficiency and electricity generation at marine and hydrokinetic power plants while mitigating nearby and distant impacts. Activities may include laboratory and computational modeling of mooring design or research on device spacing. The geographies, resources, technologies, and even nomenclature of the U.S. marine and hydrokinetic technology industry have yet to be fully understood or defined. The program characterizes and assesses marine and hydrokinetic devices, and then organizes the collected information into a comprehensive and searchable Web-based database, the Marine and Hydrokinetic Technology Database. The database, which reflects intergovernmental and international collaboration, provides industry with one of the most comprehensive and up-to-date public resources on marine and hydrokinetic devices.

LiVecchi, Al (National Renewable Energy Laboratory); Jepsen, Richard Alan

2010-06-01T23:59:59.000Z

455

FUEL CELL TECHNOLOGIES PROGRAM Technologies  

E-Print Network (OSTI)

.eere.energy.gov/informationcenter hydrogen and electricity for fuel cell and plug-in hybrid electric vehicles while using proven stationary vehicles with its own fuel cell technology. Currently, advanced vehicle technologies are being evalu- ated and fuel cells offer great promise for our energy future. Fuel cell vehicles are not yet commercially

456

NREL-Decision-Support Tools Demonstration | Open Energy Information  

Open Energy Info (EERE)

NREL-Decision-Support Tools Demonstration NREL-Decision-Support Tools Demonstration Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Decision-Support Tools Agency/Company /Organization: National Renewable Energy Laboratory Sector: Energy Topics: Policies/deployment programs, Pathways analysis, Technology characterizations Resource Type: Software/modeling tools, Presentation, Training materials Website: prod-http-80-800498448.us-east-1.elb.amazonaws.com//w/images/2/29/WIRE Decision-Support Tools Screenshot References: Decision-Support Tools [1] Logo: Decision-Support Tools "This is a short demonstration of three decision-support tools: GsT, HOMER, and JEDI. These tools can be used to make informed decisions regarding the application of renewable energy technologies." Summary

457

Identifying best practices for supporting broadband growth: Methodology and analysis  

Science Conference Proceedings (OSTI)

This paper presents a methodology for identifying best practices followed by various countries worldwide for supporting broadband growth. It also investigates and analyzes these practices using data concerning broadband penetration, access technologies, ... Keywords: Best practices, Broadband, Telecommunications policies

C. Bouras; E. Giannaka; Thrasyvoulos Tsiatsos

2009-07-01T23:59:59.000Z

458

Regenerable Mixed Copper-Iron-Inert Support Oxygen Carriers  

NLE Websites -- All DOE Office Websites (Extended Search)

Mixed Copper-Iron-Inert Support Oxygen Carriers Mixed Copper-Iron-Inert Support Oxygen Carriers for Solid Fuel Chemical Looping Combustion Process Contact NETL Technology Transfer Group techtransfer@netl.doe.gov December 2012 This patent-pending technology, "Regenerable Mixed Copper-Iron-Inert Support Oxygen Carriers for Solid Fuel Chemical Looping Combustion Process," provides a metal-oxide oxygen carrier for application in fuel combustion processes that use oxygen. This technology is available for licensing and/or further collaborative research with the U.S. Department of Energy's National Energy Technology Laboratory. Overview Patent Details U.S. Non-Provisional Patent Application No. 13/159,553; titled "Regenerable Mixed Copper-Iron-Inert Support Oxygen Carriers for Solid

459

ORISE: Supporting ARRA funded cleanup activities in Oak Ridge...  

NLE Websites -- All DOE Office Websites (Extended Search)

activities at ORNL, East Tennessee Technology Park (ETTP) and the Y-12 National Security Complex. ORISE's 8.5 million scope of work involves support to DOE in the...

460

Chemical Engineering Research Support 2007 Abitibi-Consolidated Inc.  

E-Print Network (OSTI)

Chemical Engineering Research Support 2007 Abitibi-Consolidated Inc. Agilent Technologies Agriculture & Agri-Food Canada Ahlstrom Research and Services Air Products & Chemicals Alcon Canada Alcon Hill Clariant Canada Inc. Coopervision Coveright Surfaces Holding Dofasco Inc. Domtar Inc. Dow Chemical

Thompson, Michael

Note: This page contains sample records for the topic "fixed support technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Nanostructured catalyst supports  

DOE Patents (OSTI)

The present invention relates to SiC nanostructures, including SiC nanopowder, SiC nanowires, and composites of SiC nanopowder and nanowires, which can be used as catalyst supports in membrane electrode assemblies and in fuel cells. The present invention also relates to composite catalyst supports comprising nanopowder and one or more inorganic nanowires for a membrane electrode assembly.

Zhu, Yimin; Goldman, Jay L.; Qian, Baixin; Stefan, Ionel C.

2012-10-02T23:59:59.000Z

462

Transportation Electrification: A Technology Overview  

Science Conference Proceedings (OSTI)

This report provides a detailed status on the commercial rollout of plug-in vehicles. It describes the key vehicle and infrastructure technologies and outlines a number of potential roles for electric utilities to consider when developing electric transportation readiness plans. These roles have been formulated with the objectives of enabling utilities to demonstrate regional leadership in planning for transportation electrification, to support customer adoption of plug-in vehicles and their supporting c...

2011-07-18T23:59:59.000Z

463

Technology Analysis  

NLE Websites -- All DOE Office Websites (Extended Search)

* Heavy Vehicle Technologies * Heavy Vehicle Technologies * Multi-Path Transportation Futures * Idling Studies * EDrive Vehicle Monthly Sales Transportation Research and Analysis Computing Center Working With Argonne Contact TTRDC Technology Analysis truck Heavy vehicle techologies are one subject of study. Research Reducing Greenhouse Gas Emissions from U.S. Transportation Heavy Vehicle Technologies Multi-Path Transportation Futures Study Idling Studies Light Duty Electric Drive Vehicles Monthly Sales Updates Lithium-Ion Battery Recycling and Life Cycle Analysis Reports Propane Vehicles: Status, Challenges, and Opportunities (pdf; 525 kB) Natural Gas Vehicles: Status, Barriers, and Opportunities (pdf; 696 kB) Regulatory Influences That Will Likely Affect Success of Plug-in Hybrid and Battery Electric Vehicles (pdf; 1.02 MB)

464

Steam generator support system  

SciTech Connect

A support system for connection to an outer surface of a J-shaped steam generator for use with a nuclear reactor or other liquid metal cooled power source. The J-shaped steam generator is mounted with the bent portion at the bottom. An arrangement of elongated rod members provides both horizontal and vertical support for the steam generator. The rod members are interconnected to the steam generator assembly and a support structure in a manner which provides for thermal distortion of the steam generator without the transfer of bending moments to the support structure and in a like manner substantially minimizes forces being transferred between the support structure and the steam generator as a result of seismic disturbances.

Moldenhauer, James E. (Simi Valley, CA)

1987-01-01T23:59:59.000Z

465

Steam generator support system  

DOE Patents (OSTI)

A support system for connection to an outer surface of a J-shaped steam generator for use with a nuclear reactor or other liquid metal cooled power source is disclosed. The J-shaped steam generator is mounted with the bent portion at the bottom. An arrangement of elongated rod members provides both horizontal and vertical support for the steam generator. The rod members are interconnected to the steam generator assembly and a support structure in a manner which provides for thermal distortion of the steam generator without the transfer of bending moments to the support structure and in a like manner substantially minimizes forces being transferred between the support structure and the steam generator as a result of seismic disturbances. 4 figs.

Moldenhauer, J.E.

1987-08-25T23:59:59.000Z

466

Ceramic Technology Project  

DOE Green Energy (OSTI)

The Ceramic Technology Project was developed by the USDOE Office of Transportation Systems (OTS) in Conservation and Renewable Energy. This project, part of the OTS's Materials Development Program, was developed to meet the ceramic technology requirements of the OTS's automotive technology programs. Significant accomplishments in fabricating ceramic components for the USDOE and NASA advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. These programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and data base and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. A five-year project plan was developed with extensive input from private industry. In July 1990 the original plan was updated through the estimated completion of development in 1993. The objective is to develop the industrial technology base required for reliable ceramics for application in advanced automotive heat engines. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on the structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines. To facilitate the rapid transfer of this technology to US industry, the major portion of the work is being done in the ceramic industry, with technological support from government laboratories, other industrial laboratories, and universities.

Not Available

1992-03-01T23:59:59.000Z

467

Agriculture, technology, and conflict  

E-Print Network (OSTI)

Conflict and agriculture have a long, shared history. The purpose of this research is to look at the relationships between agriculture, agricultural technologies, and conflict during current and recent conflicts, large scale and localized. Agriculture and its related technologies are often affected by conflict, but rarely acknowledged as a cause or solution to conflict. Literature reviews in six topic areas illustrate various facets of the relationship between agriculture and conflict. Research conducted in Santa Cruz del Quich, Guatemala illustrates the ways farmers were impacted by the countrys civil war. It also examines farmer survival strategies during the war, and reveals the presence of minor localized conflict over water resources. Conflict over land is not a major concern at present. Market access for inputs and outputs are shown to have been a problem for a number of farmers during the civil war. The poverty of Santa Cruz farmers indicates that much could be gained by rural development. Research is unable to support the hypotheses that agricultural technologies have prevented or caused conflict in Santa Cruz del Quich, or that they have played a large role in recovery from the countrys civil war. The author recommends that future research be undertaken in regions with a diverse set of agricultural technologies, and/or a recent history of significant technological change in agriculture. Policy recommendations include providing secure access to markets during war time, increasing capacity for home-based rural production, and continuing research into resilient crops. Finally, the author suggests that the responsible decision to develop, adopt, or introduce an agricultural technology must take into account the social consequences of that decision, including how the new technology may alleviate or contribute to conflict.

Zilverberg, Cody John

2007-05-01T23:59:59.000Z

468

Fabrication Technology  

SciTech Connect

The mission of the Fabrication Technology thrust area is to have an adequate base of manufacturing technology, not necessarily resident at Lawrence Livermore National Laboratory (LLNL), to conduct the future business of LLNL. The specific goals continue to be to (1) develop an understanding of fundamental fabrication processes; (2) construct general purpose process models that will have wide applicability; (3) document findings and models in journals; (4) transfer technology to LLNL programs, industry, and colleagues; and (5) develop continuing relationships with the industrial and academic communities to advance the collective understanding of fabrication processes. The strategy to ensure success is changing. For technologies in which they are expert and which will continue to be of future importance to LLNL, they can often attract outside resources both to maintain their expertise by applying it to a specific problem and to help fund further development. A popular vehicle to fund such work is the Cooperative Research and Development Agreement with industry. For technologies needing development because of their future critical importance and in which they are not expert, they use internal funding sources. These latter are the topics of the thrust area. Three FY-92 funded projects are discussed in this section. Each project clearly moves the Fabrication Technology thrust area towards the goals outlined above. They have also continued their membership in the North Carolina State University Precision Engineering Center, a multidisciplinary research and graduate program established to provide the new technologies needed by high-technology institutions in the US. As members, they have access to and use of the results of their research projects, many of which parallel the precision engineering efforts at LLNL.

Blaedel, K.L.

1993-03-01T23:59:59.000Z

469

Beauty and charm production in fixed target experiments.  

E-Print Network (OSTI)

.K. has been supported by a Marie Curie Fellowship of the Euro- pean Community programme Improving Human Research Potential under contract no. HPMF-CT-2001-01221. The research of R.V. is supported in part by the Division of Nuclear Physics of the Office... of High Energy and Nuclear Physics of the U.S. Department of Energy under Contract No. DE-AC-03-76SF00098. 4 Figure 3: Charm quark production in pi?p interactions. References [1] N. Kidonakis, Phys. Rev. D 64, 014009 (2001); N. Kidonakis, E. Laenen, S...

Kidonakis, Nikolaos; Vogt, Ramona

470

Building Technologies Office: Financial Opportunities  

NLE Websites -- All DOE Office Websites (Extended Search)

Financial Opportunities Financial Opportunities DOE financial opportunities for solid-state lighting (SSL) include competitive solicitations, grants, and other federal funding mechanisms to advance innovative, energy-saving SSL technologies. Related Incentives and Funding Opportunities DOE has created this resource to help researchers, manufacturers, and distributors of SSL products locate funding opportunities to advance and deploy innovative, energy-saving technologies. Learn more. Illustration of a microscope, a person holding a large key in front of a factory building, a price tag with a dollar sign on it, and tax forms. DOE SSL Program The DOE SSL program supports research and development of promising SSL technologies through annual competitive solicitations in three areas:

471

MHK Technologies/Mobil Stabilized Energy Conversion Platform | Open Energy  

Open Energy Info (EERE)

MHK Technologies/Mobil Stabilized Energy Conversion Platform MHK Technologies/Mobil Stabilized Energy Conversion Platform < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Mobil Stabilized Energy Conversion Platform.jpg Technology Profile Primary Organization Aqua Magnetics Inc Technology Resource Click here Wave Technology Type Click here Reciprocating Device Technology Readiness Level Click here TRL 1 3 Discovery Concept Def Early Stage Dev Design Engineering Technology Description The Stabilized Energy Conversion Platform SECOP consists of submersible hulls supporting a raised work platform containing a number of AMI s reciprocating electric generators Technology Dimensions Device Testing Date Submitted 34:44.5 << Return to the MHK database homepage Retrieved from

472

Advanced Technology Vehicle Testing  

DOE Green Energy (OSTI)

The light-duty vehicle transportation sector in the United States depends heavily on imported petroleum as a transportation fuel. The Department of Energys Advanced Vehicle Testing Activity (AVTA) is testing advanced technology vehicles to help reduce this dependency, which would contribute to the economic stability and homeland security of the United States. These advanced technology test vehicles include internal combustion engine vehicles operating on 100% hydrogen (H2) and H2CNG (compressed natural gas) blended fuels, hybrid electric vehicles, neighborhood electric vehicles, urban electric vehicles, and electric ground support vehicles. The AVTA tests and evaluates these vehicles with closed track and dynamometer testing methods (baseline performance testing) and accelerated reliability testing methods (accumulating lifecycle vehicle miles and operational knowledge within 1 to 1.5 years), and in normal fleet environments. The Arizona Public Service Alternative Fuel Pilot Plant and H2-fueled vehicles are demonstrating the feasibility of using H2 as a transportation fuel. Hybrid, neighborhood, and urban electric test vehicles are demonstrating successful applications of electric drive vehicles in various fleet missions. The AVTA is also developing electric ground support equipment (GSE) test procedures, and GSE testing will start during the fall of 2003. All of these activities are intended to support U.S. energy independence. The Idaho National Engineering and Environmental Laboratory manages these activities for the AVTA.

James Francfort

2003-11-01T23:59:59.000Z

473

Supporting collaboration, enhancing learning  

Science Conference Proceedings (OSTI)

It is broadly admitted that collaboration can facilitate and augment learning in many ways. Accordingly, collaborative learning models, tools and technologies should receive increasing attention. Aiming at further contributing to this directive, this ...

Nikos Karacapilidis

2011-07-01T23:59:59.000Z

474

Building Technologies Office: 2013 DOE Building Technologies...  

NLE Websites -- All DOE Office Websites (Extended Search)

2013 DOE Building Technologies Office Program Review to someone by E-mail Share Building Technologies Office: 2013 DOE Building Technologies Office Program Review on Facebook Tweet...

475

National Energy Technology Laboratory Technology Marketing ...  

National Energy Technology Laboratory Technology Marketing Summaries. Here youll find marketing summaries for technologies available for licensing from the ...

476

Support Divisions & Offices  

NLE Websites -- All DOE Office Websites (Extended Search)

Support Organizations Support Organizations Directorates Business Operations Directorate Provides high-quality business services to support the Lab's research initiatives by participating in cross-functional teams with a focus on risk mitigation and cost management, which is a critical component to the Lab's success. Environment, Safety & Health Serves the environment, safety, and health needs of our internal customers in an effective and efficient manner and to meet or exceed the expectations of our external customers. Community, Education, Government & Public Affairs (CEGPA) Develops best-in-class communications, science education, government relations and community involvement programs that advance the science and science education missions of the Laboratory, contribute to public understanding of

477

Flame quality monitor system for fixed firing rate oil burners  

DOE Patents (OSTI)

A method and apparatus for determining and indicating the flame quality, or efficiency of the air-fuel ratio, in a fixed firing rate heating unit, such as an oil burning furnace, is provided. When the flame brightness falls outside a preset range, the flame quality, or excess air, has changed to the point that the unit should be serviced. The flame quality indicator output is in the form of lights mounted on the front of the unit. A green light indicates that the flame is about in the same condition as when the burner was last serviced. A red light indicates a flame which is either too rich or too lean, and that servicing of the burner is required. At the end of each firing cycle, the flame quality indicator goes into a hold mode which is in effect during the period that the burner remains off. A yellow or amber light indicates that the burner is in the hold mode. In this mode, the flame quality lights indicate the flame condition immediately before the burner turned off. Thus the unit can be viewed when it is off, and the flame condition at the end of the previous firing cycle can be observed.

Butcher, T.A.; Cerniglia, P.

1990-10-23T23:59:59.000Z

478

Isolated thermocouple amplifier system for stirred fixed-bed gasifier  

DOE Patents (OSTI)

A sensing system is provided for determining the bed temperature profile of the bed of a stirred, fixed-bed gasifier including a plurality of temperature sensors for sensing the bed temperature at different levels, a transmitter for transmitting data based on the outputs of the sensors to a remote operator's station, and a battery-based power supply. The system includes an isolation amplifier system comprising a plurality of isolation amplifier circuits for amplifying the outputs of the individual sensors. The isolation amplifier circuits each comprise an isolation operational amplifier connected to a sensor; a first flying capacitor circuit for, in operation, controlling the application of power from the power supply to the isolation amplifier; an output sample and hold circuit connected to the transmitter; a second flying capacitor circuit for, in operation, controlling the transfer of the output of the isolation amplifier to the sample and hold circuit; and a timing and control circuit for activating the first and second capacitor circuits in predetermined timed sequence. 4 figs.

Fasching, G.E.

1989-08-08T23:59:59.000Z

479

Isolated thermocouple amplifier system for stirred fixed-bed gasifier  

DOE Patents (OSTI)

A sensing system is provided for determining the bed temperature profile of the bed of a stirred, fixed-bed gasifier including a plurality of temperature sensors for sensing the bed temperature at different levels, a transmitter for transmitting data based on the outputs of the sensors to a remote operator's station, and a battery-based power supply. The system includes an isolation amplifier system comprising a plurality of isolation amplifier circuits for amplifying the outputs of the individual sensors. The isolation amplifier circuits each comprise an isolation operational amplifier connected to a sensor; a first "flying capacitor" circuit for, in operation, controlling the application of power from the power supply to the isolation amplifier; an output sample and hold circuit connected to the transmitter; a second "flying capacitor" circuit for, in operation, controlling the transfer of the output of the isolation amplifier to the sample and hold circuit; and a timing and control circuit for activating the first and second capacitor circuits in a predetermined timed sequence.

Fasching, George E. (Morgantown, WV)

1992-01-01T23:59:59.000Z

480

Ash level meter for a fixed-bed coal gasifier  

DOE Patents (OSTI)

An ash level meter for a fixed-bed coal gasifier is provided which utilizes the known ash level temperature profile to monitor the ash bed level. A bed stirrer which travels up and down through the extent of the bed ash level is modified by installing thermocouples to measure the bed temperature as the stirrer travels through the stirring cycle. The temperature measurement signals are transmitted to an electronic signal process system by an FM/FM telemetry system. The processing system uses the temperature signals together with an analog stirrer position signal, taken from a position transducer disposed to measure the stirrer position to compute the vertical location of the ash zone upper boundary. The circuit determines the fraction of each total stirrer cycle time the stirrer-derived bed temperature is below a selected set point, multiplies this fraction by the average stirrer signal level, multiplies this result by an appropriate constant and adds another constant such that a 1 to 5 volt signal from the processor corresponds to a 0 to 30 inch span of the ash upper boundary level. Three individual counters in the processor store clock counts that are representative of: (1) the time the stirrer temperature is below the set point (500.degree. F.), (2) the time duration of the corresponding stirrer travel cycle, and (3) the corresponding average stirrer vertical position. The inputs to all three counters are disconnected during any period that the stirrer is stopped, eliminating corruption of the measurement by stirrer stoppage.

Fasching, George E. (Morgantown, WV)

1984-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "fixed support technology" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Flame quality monitor system for fixed firing rate oil burners  

DOE Patents (OSTI)

A method and apparatus for determining and indicating the flame quality, or efficiency of the air-fuel ratio, in a fixed firing rate heating unit, such as an oil burning furnace, is provided. When the flame brightness falls outside a preset range, the flame quality, or excess air, has changed to the point that the unit should be serviced. The flame quality indicator output is in the form of lights mounted on the front of the unit. A green light indicates that the flame is about in the same condition as when the burner was last serviced. A red light indicates a flame which is either too rich or too lean, and that servicing of the burner is required. At the end of each firing cycle, the flame quality indicator goes into a hold mode which is in effect during the period that the burner remains off. A yellow or amber light indicates that the burner is in the hold mode. In this mode, the flame quality lights indicate the flame condition immediately before the burner turned off. Thus the unit can be viewed when it is off, and the flame condition at the end of the previous firing cycle can be observed.

Butcher, Thomas A. (Pt. Jefferson, NY); Cerniglia, Philip (Moriches, NY)

1992-01-01T23:59:59.000Z

482

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Manufacturing Information Integration & Infrastructure Manufacturing Information Integration & Infrastructure PDF format (47 kb) The Information Infrastructure Team in the Computer Applications for Manufacturing organization can provide programming and analysis support for information applications for manufacturing. The Team works closely with customers to help them define their requirements. The Team's experience and expertise can help your manufacturing information needs. Capabilities Provide computer hardware and software standards that directly support the seamless manufacturing initiative. Develop graphical user interfaces (GUI) for applications using the proprietary Windows environment or an open system design using Web servers and client browsers. Provide computer hardware support, including all personal computer

483

Fixed bed testing of durable, steam resistant zinc oxide containing sorbents  

SciTech Connect

The US Department of Energy is currently developing Integrated Gasification combined Cycle (IGCC) systems for electrical power generation. It has been predicted that IGCC plants with hot gas cleanup will be superior to conventional pulverized coal-fired power plants in overall plant efficiency and environmental performance. Development of a suitable regenerable sorbent is a major barrier issue in the hot gas cleanup program for IGCC systems. This has been a challenging problem during the last 20 years, since many of the sorbents developed in the program could not retain their reactivity and physical integrity during repeated cycles of sulfidation and regeneration reactions. Two promising sorbents and (METC6), which were capable of sustaining their reactivity and physical integrity during repeated sulfidation/regeneration cycles, have been developed at the Morgantown Energy Technology Center (METC) during the past year. These sorbents were tested (sulfided) both in low-pressure (260 kPa/37.7 psia) and high-pressure (1034 kPa/150 psia) fixed-bed reactors at 538{degrees}C (1000{degrees}F) with simulated KRW coal gas. High-pressure testing was continued for 20 cycles with steam regeneration. There were no appreciable changes in sulfidation capacity of the sorbents during the 20-cycle testing. The crush strength of the sorbent actually improved after 20 cycles and there were no indications of spalling or any other physical deterioration of the sorbents. In testing to date, these sorbents exhibit better overall sulfur capture performance than the conventional sorbents.

Siriwardane, R.V.; Grimm, U.; Poston, J. [USDOE Morgantown Energy Technology Center, WV (United States); Monaco, S.J. [EG& G dTechnical Services of West Virginia, Inc., Morgantown, WV (United States)

1994-12-31T23:59:59.000Z

484