Powered by Deep Web Technologies
Note: This page contains sample records for the topic "finish line event" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Solder flow over fine line PWB surface finishes  

SciTech Connect (OSTI)

The rapid advancement of interconnect technology has stimulated the development of alternative printed wiring board (PWB) surface finishes to enhance the solderability of standard copper and solder-coated surfaces. These new finishes are based on either metallic or organic chemistries. As part of an ongoing solderability study, Sandia National Laboratories has investigated the solder flow behavior of two azole-based organic solderability preservations, immersion Au, immersion Ag, electroless Pd, and electroless Pd/Ni on fine line copper features. The coated substrates were solder tested in the as-fabricated and environmentally-stressed conditions. Samples were processed through an inerted reflow machine. The azole-based coatings generally provided the most effective protection after aging. Thin Pd over Cu yielded the best wetting results of the metallic coatings, with complete dissolution of the Pd overcoat and wetting of the underlying Cu by the flowing solder. Limited wetting was measured on the thicker Pd and Pd over Ni finishes, which were not completely dissolved by the molten solder. The immersion Au and Ag finishes yielded the lowest wetted lengths, respectively. These general differences in solderability were directly attributed to the type of surface finish which the solder came in contact with. The effects of circuit geometry, surface finish, stressing, and solder processing conditions are discussed.

Hosking, F.M.; Hernandez, C.L.

1998-08-01T23:59:59.000Z

2

Contingency Analysis of Cascading Line Outage Events  

SciTech Connect (OSTI)

As the US power systems continue to increase in size and complexity, including the growth of smart grids, larger blackouts due to cascading outages become more likely. Grid congestion is often associated with a cascading collapse leading to a major blackout. Such a collapse is characterized by a self-sustaining sequence of line outages followed by a topology breakup of the network. This paper addresses the implementation and testing of a process for N-k contingency analysis and sequential cascading outage simulation in order to identify potential cascading modes. A modeling approach described in this paper offers a unique capability to identify initiating events that may lead to cascading outages. It predicts the development of cascading events by identifying and visualizing potential cascading tiers. The proposed approach was implemented using a 328-bus simplified SERC power system network. The results of the study indicate that initiating events and possible cascading chains may be identified, ranked and visualized. This approach may be used to improve the reliability of a transmission grid and reduce its vulnerability to cascading outages.

Thomas L Baldwin; Magdy S Tawfik; Miles McQueen

2011-03-01T23:59:59.000Z

3

Magnetospheric line radiation event observed simultaneously on board Cluster 1, Cluster 2 and DEMETER spacecraft  

E-Print Network [OSTI]

be related to power line harmonic radiation (PLHR, an electromagnetic radiation from electric power systemsMagnetospheric line radiation event observed simultaneously on board Cluster 1, Cluster 2., O. Santolík, M. Parrot, and J. S. Pickett (2012), Magnetospheric line radiation event observed

Santolik, Ondrej

4

6.4 A BOW-ECHO EVENT ON A SQUALL LINE IN THE NETHERLANDS Rob Groenland  

E-Print Network [OSTI]

6.4 A BOW-ECHO EVENT ON A SQUALL LINE IN THE NETHERLANDS Rob Groenland Meteo Consult, Wageningen, The Netherlands (Europe) ABSTRACT In this study, the structure of a bow-echo on a squall line is investigated . It accelerated as it moved into the Netherlands. A bow-echo developed over extreme northern Belgium

Haak, Hein

5

Impacts of Microphysical Scheme on Convective and Stratiform Characteristics in Two High Precipitation Squall Line Events  

SciTech Connect (OSTI)

This study investigates the impact of snow, graupel, and hail processes on the simulated squall lines over the Southern Great Plains in the United States. Weather Research and Forecasting (WRF) model is used to simulate two squall line events in May 2007, and the results are validated against radar and surface observations in Oklahoma. Several microphysics schemes are tested in this study, including WRF 5-Class Microphysics Scheme (WSM5), WRF 6-Class Microphysics Scheme (WSM6), Goddard Three Ice scheme (Goddard 3-ice) with graupel, Goddard Two Ice scheme (Goddard 2-ice), and Goddard 3-ice hail scheme. The simulated surface precipitation is sensitive to the microphysics scheme, and especially to whether graupel or hail category is included. All of the three ice (3-ice) schemes overestimated the total precipitation, within which WSM6 has the highest overestimation. Two ice (2-ice) schemes, missing a graupel/hail category, produced less total precipitation than 3-ice schemes. By applying a radar-based convective/stratiform partitioning algorithm, we find that by including the graupel/hail processes, there is an increase in areal coverage, precipitation intensity, updraft and downdraft intensity in convective region and a reduction of areal coverage and its precipitation intensity in stratiform region. For vertical structures, all the bulk schemes, especially 2-ice schemes, have the highest reflectivity located at upper levels (~8 km), which is unrealistic compared to observations. In addition, this study shows the radar-based convective/stratiform partitioning algorithm can reasonably identify WRF simulated precipitation, wind and microphysics fields in both convective and stratiform regions.

Wu, Di; Dong, Xiquan; Xi, Baike; Feng, Zhe; Kennedy, Aaron; Mullendore, Gretchen; Gilmore, Matthew; Tao, Wei-Kuo

2013-10-04T23:59:59.000Z

6

Number and propagation of line outages in cascading events in electric power transmission systems  

E-Print Network [OSTI]

of transmission lines. We estimate from observed utility data how transmission line outages propagate, and obtain is consistent with the utility data by using it to estimate the distribution of the total number of lines statistical behavior of cascading transmission line outages from standard utility data that records the times

Dobson, Ian

7

EcoCAR Reaches the Finish Line  

Office of Energy Efficiency and Renewable Energy (EERE)

Virginia Tech takes the checkered flag as the inaugural EcoCar competition comes to a close in Washington, D.C.

8

EcoCAR Challenge: Finish Line  

Broader source: Energy.gov [DOE]

The EcoCAR Challenege is a competition that challenges participating students from across North America to re-engineer a vehicle donated by General Motors. With the goal of minimizing the vehicle...

9

EcoCAR Challenge: Finish Line  

ScienceCinema (OSTI)

The EcoCAR Challenege is a competition that challenges participating students from across North America to re-engineer a vehicle donated by General Motors. With the goal of minimizing the vehicle's fuel consumption and emissions, while maintaining its utility, safety and performance, teams had to find the best combination of cutting-edge technologies to meet these objectives. In the final year, the vehicles ran through a series of safety and technical tests at GM's Proving Ground in Milford, Michigan very similar to those GM's own production vehicles undergo. As EcoCAR wraps up, it is only the beginning for the next chapter in the DOE's 23-year history of advanced vehicle technology competitions. In April, Assistant Secretary for Policy and International Affairs David Sandalow announced the launch of EcoCAR 2: Plugging into the Future http://www.ecocar2.org/index.html . We look forward to seeing the new and innovative designs that students bring to this challenge and know they will find a way to exceed even our highest expectations.

None

2013-05-29T23:59:59.000Z

10

Events  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series toESnet4:Epitaxial Thin Film XRDEvan Felix efelix Primary12:25 p.m.Events

11

Events  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series toESnet4:Epitaxial Thin Film XRDEvan Felix efelix Primary12:25Events

12

Independent Activity Report, Hanford Plutonium Finishing Plant...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Plutonium Finishing Plant - May 2012 Independent Activity Report, Hanford Plutonium Finishing Plant - May 2012 May 2012 Criticality Safety Information Meeting for the Hanford...

13

Semi-finished modular cells  

E-Print Network [OSTI]

This thesis subject is a pre-fabricated element (cell): a system that employs natural, light, and economic materials to produce a near-finished portion of a building. The intent is to introduce sustainable design into ...

Bachelder, Laura Govoni, 1971-

2002-01-01T23:59:59.000Z

14

The Best Finish First: Sequence Finishing with Whole Genome Mapping ( 7th Annual SFAF Meeting, 2012)  

ScienceCinema (OSTI)

Deacon Sweeney on "the Best Finish First: Sequence Finishing with Whole Genome Mapping" at the 2012 Sequencing, Finishing, Analysis in the Future Meeting held June 5-7, 2012 in Santa Fe, New Mexico.

Sweeney, Deacon [OpGen, Inc.

2013-03-22T23:59:59.000Z

15

Y-12 Finishes Initial HEUMF Loading Ahead of Schedule | National...  

National Nuclear Security Administration (NNSA)

Home Field Offices Welcome to the NNSA Production Office NPO News Releases Y-12 Finishes Initial HEUMF Loading Ahead of Schedule Y-12 Finishes Initial HEUMF Loading...

16

Workers Create Demolition Zone at Hanford Site's Plutonium Finishing...  

Broader source: Energy.gov (indexed) [DOE]

Create Demolition Zone at Hanford Site's Plutonium Finishing Plant Workers Create Demolition Zone at Hanford Site's Plutonium Finishing Plant August 28, 2014 - 12:00pm Addthis The...

17

Plutonium finishing plant dangerous waste training plan  

SciTech Connect (OSTI)

This training plan describes general requirements, worker categories, and provides course descriptions for operation of the Plutonium Finish Plant (PFP) waste generation facilities, permitted treatment, storage and disposal (TSD) units, and the 90-Day Accumulation Areas.

ENTROP, G.E.

1999-05-24T23:59:59.000Z

18

NCMS PWB Surface Finishes Team project summary  

SciTech Connect (OSTI)

The NCMS PWB Surface Finishes Consortium is just about at the end of the five year program. Dozens of projects related to surface finishes and PWB solder-ability were performed by the team throughout the program, and many of them are listed in this paper. They are listed with a cross reference to where and when a technical paper was presented describing the results of the research. However, due to time and space constraints, this paper can summarize the details of only three of the major research projects accomplished by the team. The first project described is an ``Evaluation of PWB Surface Finishes.`` It describes the solderability, reliability, and wire bondability of numerous surface finishes. The second project outlined is an ``Evaluation of PWB Solderability Test Methods.`` The third project outlined is the ``Development and Evaluation of Organic Solderability Preservatives.``

Kokas, J.; DeSantis, C. [United Technologies Corp., Farmington, CT (United States). Hamilton Standard Div.; Wenger, G. [AT and T, New York, NY (United States)] [and others

1996-04-01T23:59:59.000Z

19

Frequency of Solar-Like Systems and of Ice and Gas Giants Beyond the Snow Line from High-Magnification Microlensing Events in 2005-2008  

E-Print Network [OSTI]

We present the first measurement of planet frequency beyond the "snow line" for planet/star mass-ratios[-4.5200) microlensing events during 2005-8. The sample host stars have typical mass M_host 0.5 Msun, and detection is sensitive to planets over a range of projected separations (R_E/s_max,R_E*s_max), where R_E 3.5 AU sqrt(M_host/Msun) is the Einstein radius and s_max (q/5e-5)^{2/3}, corresponding to deprojected separations ~3 times the "snow line". Though frenetic, the observations constitute a "controlled experiment", which permits measurement of absolute planet frequency. High-mag events are rare, but the high-mag channel is efficient: half of high-mag events were successfully monitored and half of these yielded planet detections. The planet frequency derived from microlensing is a factor 7 larger than from RV studies at factor ~25 smaller separations [2

Gould, A; Gaudi, B S; Udalski, A; Bond, I A; Greenhill, J; Street, R A; Dominik, M; Sumi, T; Szymanski, M K; Han, C

2014-01-01T23:59:59.000Z

20

Improved Microbe Assembly and Finishing Using 454 8kb Libraries  

SciTech Connect (OSTI)

Christian Buhay from Baylor College of Medicine's Human Genome Sequencing Center discusses microbial genome finishing strategies on June 3, 2010 at the "Sequencing, Finishing, Analysis in the Future" meeting in Santa Fe, NM

Buhay, Christian [Baylor College of Medicine's Human Genome Sequencing Center

2010-06-03T23:59:59.000Z

Note: This page contains sample records for the topic "finish line event" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Nearly Finished Genomes Produced Using Gel Microdroplet Culturing (Seventh Annual Sequencing, Finishing, Analysis in the Future (SFAF) Meeting 2012)  

ScienceCinema (OSTI)

Michael Fitzsimmons from Los Alamos National Laboratory gives a talk titled "Nearly Finished Genomes Produced Using Gel Microdroplet Culturing" at the 7th Annual Sequencing, Finishing, Analysis in the Future (SFAF) Meeting held in June, 2012 in Santa Fe, NM.

Fitzsimmons, Michael [LANL

2013-01-25T23:59:59.000Z

22

Perspective on plating for precision finishing  

SciTech Connect (OSTI)

This paper is intended as an overview on platings for precision finishing operations. After a brief review of the two processes (polishing and precision machining) by which a coating on a part can be converted to a precision surface, the coatings which work successfully in these applications will be discussed. Then adhesion and stress aspects of deposits will be covered. Electroless nickel, which is a particularly attractive coating for precision finishing applications, will be discussed in some detail, from its early years as the Kanigen'' process to the present. Since microstructural changes in deposits are important for precision parts, this aspect will be covered for electroless nickel, copper and silver deposits. Lastly, some words will be directed at potential future electrodeposited coatings including nickel-phosphorus alloys, and various silver alloys. 41 refs., 16 figs., 1 tab.

Dini, J.W.

1991-04-01T23:59:59.000Z

23

Demonstration of a Novel Synchrophasor-based Situational Awareness System: Wide Area Power System Visualization, On-line Event Replay and Early Warning of Grid Problems  

SciTech Connect (OSTI)

Since the large North Eastern power system blackout on August 14, 2003, U.S. electric utilities have spent lot of effort on preventing power system cascading outages. Two of the main causes of the August 14, 2003 blackout were inadequate situational awareness and inadequate operator training In addition to the enhancements of the infrastructure of the interconnected power systems, more research and development of advanced power system applications are required for improving the wide-area security monitoring, operation and planning in order to prevent large- scale cascading outages of interconnected power systems. It is critically important for improving the wide-area situation awareness of the operators or operational engineers and regional reliability coordinators of large interconnected systems. With the installation of large number of phasor measurement units (PMU) and the related communication infrastructure, it will be possible to improve the operators’ situation awareness and to quickly identify the sequence of events during a large system disturbance for the post-event analysis using the real-time or historical synchrophasor data. The purpose of this project was to develop and demonstrate a novel synchrophasor-based comprehensive situational awareness system for control centers of power transmission systems. The developed system named WASA (Wide Area Situation Awareness) is intended to improve situational awareness at control centers of the power system operators and regional reliability coordinators. It consists of following main software modules: • Wide-area visualizations of real-time frequency, voltage, and phase angle measurements and their contour displays for security monitoring. • Online detection and location of a major event (location, time, size, and type, such as generator or line outage). • Near-real-time event replay (in seconds) after a major event occurs. • Early warning of potential wide-area stability problems. The system has been deployed and demonstrated at the Tennessee Valley Authority (TVA) and ISO New England system using real-time synchrophasor data from openPDC. Apart from the software product, the outcome of this project consists of a set of technical reports and papers describing the mathematical foundations and computational approaches of different tools and modules, implementation issues and considerations, lessons learned, and the results of lidation processes.

Rosso, A.

2012-12-31T23:59:59.000Z

24

Wearability of Portland Cement Concrete Pavement Finishes  

E-Print Network [OSTI]

Major Subject: Civil Engineering NEARABILITY OF PORTLAND CENENT CONCRETE PAPFNENT FIVISNFS A Thesis by Nilliam Rem NcKeen Approved as to style and content by: (Chairman of Committ e) (Nember) August 1971 ABSTRACT Hearabil'tv of Portland Cement... portland cement, and an air entrainment admixture. Standard laboratory tests were performed on all aggregates to determine their properties. iv The test specimens were molded in a controlled environmental room and the anpropriate surface finish (burlap...

McKeen, William Rew

1971-01-01T23:59:59.000Z

25

Figure and finish of grazing incidence mirrors  

SciTech Connect (OSTI)

Great improvement has been made in the past several years in the quality of optical components used in synchrotron radiation (SR) beamlines. Most of this progress has been the result of vastly improved metrology techniques and instrumentation permitting rapid and accurate measurement of the surface finish and figure on grazing incidence optics. A significant theoretical effort has linked the actual performance of components used as x-ray wavelengths to their topological properties as measured by surface profiling instruments. Next-generation advanced light sources will require optical components and systems to have sub-arc second surface figure tolerances. This paper will explore the consequences of these requirements in terms of manufacturing tolerances to see if the present manufacturing state-of-the-art is capable of producing the required surfaces. 15 refs., 14 figs., 2 tabs.

Takacs, P.Z. (Brookhaven National Lab., Upton, NY (USA)); Church, E.L. (Picatinny Arsenal, Dover, NJ (USA). Army Armament Research, Development and Engineering Center)

1989-08-01T23:59:59.000Z

26

Plutonium finishing plant safety systems and equipment list  

SciTech Connect (OSTI)

The Safety Equipment List (SEL) supports Analysis Report (FSAR), WHC-SD-CP-SAR-021 and the Plutonium Finishing Plant Operational Safety Requirements (OSRs), WHC-SD-CP-OSR-010. The SEL is a breakdown and classification of all Safety Class 1, 2, and 3 equipment, components, or system at the Plutonium Finishing Plant complex.

Bergquist, G.G.

1995-01-06T23:59:59.000Z

27

Plutonium Finishing Plant safety evaluation report  

SciTech Connect (OSTI)

The Plutonium Finishing Plant (PFP) previously known as the Plutonium Process and Storage Facility, or Z-Plant, was built and put into operation in 1949. Since 1949 PFP has been used for various processing missions, including plutonium purification, oxide production, metal production, parts fabrication, plutonium recovery, and the recovery of americium (Am-241). The PFP has also been used for receipt and large scale storage of plutonium scrap and product materials. The PFP Final Safety Analysis Report (FSAR) was prepared by WHC to document the hazards associated with the facility, present safety analyses of potential accident scenarios, and demonstrate the adequacy of safety class structures, systems, and components (SSCs) and operational safety requirements (OSRs) necessary to eliminate, control, or mitigate the identified hazards. Documented in this Safety Evaluation Report (SER) is DOE`s independent review and evaluation of the PFP FSAR and the basis for approval of the PFP FSAR. The evaluation is presented in a format that parallels the format of the PFP FSAR. As an aid to the reactor, a list of acronyms has been included at the beginning of this report. The DOE review concluded that the risks associated with conducting plutonium handling, processing, and storage operations within PFP facilities, as described in the PFP FSAR, are acceptable, since the accident safety analyses associated with these activities meet the WHC risk acceptance guidelines and DOE safety goals in SEN-35-91.

Not Available

1995-01-01T23:59:59.000Z

28

Use of Optical Mapping in Bacterial Genome Finishing  

SciTech Connect (OSTI)

Dibyendu Kumar from the University of Florida discusses whole-genome optical mapping to help validate bacterial genome assemblies on June 3, 2010 at the "Sequencing, Finishing, Analysis in the Future" meeting in Santa Fe, NM

Kumar, Dibyendu [University of Florida

2010-06-03T23:59:59.000Z

29

avaetapi finish oli: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Akvil? 2012-01-01 12 Wearability of Portland Cement Concrete Pavement Finishes Texas A&M University - TxSpace Summary: fine aggregate types: a siliceous sand (SF), also...

30

Progress Continues Toward Demolition of Hanford's Plutonium Finishing...  

Energy Savers [EERE]

Piece by piece, workers are safely and compliantly preparing to demolish a relic of Cold War plutonium production at the Hanford site. The Plutonium Finishing Plant was the final...

31

Worker Involvement Improves Safety at Hanford Site's Plutonium Finishing Plant  

Broader source: Energy.gov [DOE]

Employees at the Hanford site are working together to find new and innovative ways to stay safe at the Plutonium Finishing Plant, one of the site’s most complex decommissioning projects.

32

Drying and curing of stains and lacquers used in furniture finishing 1 DRYING AND CURING OF STAINS AND LACQUERS USED IN  

E-Print Network [OSTI]

Nexus engaged a consultant to design a semi-automated finishing line, so as to remove inefficiencies. In cold or humid weather white milky patches may appear in the surface fin- ish. This is known as blooming-spray booth which consists of an open area of the factory backed by a wall of filters; fans behind thi

Stokes, Yvonne

33

Digestible threonine requirement of starter and finisher swine  

E-Print Network [OSTI]

initially, 42 d trial duration) pigs, and two digestion trials (five starter and four finishei pigs) were conducted to determine the digestible threonine (Thr) requirement of starter and finisher pigs. Each trial evaluated control and basal diets..., and the basal diet plus four incr cmental additions of L-Thr (. 04, . 08, . 12 or . 16? for star ter and . 05, , 10, , 15, or . 20'7. for finisher diets). The basal diet used in the growth trial with starter pigs contained . 60%%u Thr, 17. 6A CP, and 1. 258...

Saldana, Carlos Ivan

1992-01-01T23:59:59.000Z

34

Cycle Time Prediction: When Will This Case Finally Be Finished?  

E-Print Network [OSTI]

number. Instead, this is usually the average cycle time of a case, combined with a certain marginCycle Time Prediction: When Will This Case Finally Be Finished? B.F. van Dongen, R.A. Crooy, and W into the remaining cycle time of a case, the current case can be compared to all past ones. The most trivial way

van der Aalst, Wil

35

Lead-Free Surface Finishes for Electronic Components  

E-Print Network [OSTI]

Lead-Free Surface Finishes for Electronic Components: Tin Whisker Growth METALS This project degraded by the switch to lead- free technology. In particular, the state of compressive stress and the localized creep response (whisker growth) of tin-based lead-free electrodeposits are being measured

36

Cost-effectiveness analysis of effluent standards and limitations for the metal finishing industry. Final report  

SciTech Connect (OSTI)

The report summarizes the results of a cost-effectiveness analysis of the metal finishing industry. The analysis considers the cost-effectiveness of the final metal finishing regulations for direct and indirect dischargers.

Not Available

1983-06-01T23:59:59.000Z

37

Method and system for processing optical elements using magnetorheological finishing  

DOE Patents [OSTI]

A method of finishing an optical element includes mounting the optical element in an optical mount having a plurality of fiducials overlapping with the optical element and obtaining a first metrology map for the optical element and the plurality of fiducials. The method also includes obtaining a second metrology map for the optical element without the plurality of fiducials, forming a difference map between the first metrology map and the second metrology map, and aligning the first metrology map and the second metrology map. The method further includes placing mathematical fiducials onto the second metrology map using the difference map to form a third metrology map and associating the third metrology map to the optical element. Moreover, the method includes mounting the optical element in the fixture in an MRF tool, positioning the optical element in the fixture; removing the plurality of fiducials, and finishing the optical element.

Menapace, Joseph Arthur; Schaffers, Kathleen Irene; Bayramian, Andrew James; Molander, William A

2012-09-18T23:59:59.000Z

38

Effectiveness and Serviceability of Four Home-applied Cotton Fabric Finishes.  

E-Print Network [OSTI]

subjected to physical and chemical tests to determine the effect of each finish on strength, color, cellulose degradation and other properties. At intervals throughout the study, the men who wore the shirts recorded their opinions of each finish..., stiffness, vrinltle recovery and cellulose degradation. Since there is no laboratory test method that ?;ill simulate actual wear, the fabric was made into sport shirts and the serviceability of the home-applied finishes was determined by a realistic...

Werman, Carolyn A.; Grimes, Mary Anna

1957-01-01T23:59:59.000Z

39

Economics of specialized integrated swine finishing operation in the Texas Panhandle  

E-Print Network [OSTI]

of Department (Member) (Member) C (Member) December 1971 ABSTRACT Economics of Specialized Swine Finishing Operation in the Texas Panhandle. (December 1971) Guyle Earl Cavin, B. S. , Texas Afd1 University Directed by: Dr. Donald E. Ferris The purpose... and finishing stage of production. The objectives of the study were to determine: (1) if a supply of good quality relatively disease-free feeder pigs is available in a supply sufficient to furnish an expanded increase in the swine finishing industry, (2...

Cavin, Guyle Earl

1971-01-01T23:59:59.000Z

40

Plutonium Finishing Plant (PFP) Final Safety Analysis Report (FSAR) [SEC 1 THRU 11  

SciTech Connect (OSTI)

The Plutonium Finishing Plant (PFP) is located on the US Department of Energy (DOE) Hanford Site in south central Washington State. The DOE Richland Operations (DOE-RL) Project Hanford Management Contract (PHMC) is with Fluor Hanford Inc. (FH). Westinghouse Safety Management Systems (WSMS) provides management support to the PFP facility. Since 1991, the mission of the PFP has changed from plutonium material processing to preparation for decontamination and decommissioning (D and D). The PFP is in transition between its previous mission and the proposed D and D mission. The objective of the transition is to place the facility into a stable state for long-term storage of plutonium materials before final disposition of the facility. Accordingly, this update of the Final Safety Analysis Report (FSAR) reflects the current status of the buildings, equipment, and operations during this transition. The primary product of the PFP was plutonium metal in the form of 2.2-kg, cylindrical ingots called buttoms. Plutonium nitrate was one of several chemical compounds containing plutonium that were produced as an intermediate processing product. Plutonium recovery was performed at the Plutonium Reclamation Facility (PRF) and plutonium conversion (from a nitrate form to a metal form) was performed at the Remote Mechanical C (RMC) Line as the primary processes. Plutonium oxide was also produced at the Remote Mechanical A (RMA) Line. Plutonium processed at the PFP contained both weapons-grade and fuels-grade plutonium materials. The capability existed to process both weapons-grade and fuels-grade material through the PRF and only weapons-grade material through the RMC Line although fuels-grade material was processed through the line before 1984. Amounts of these materials exist in storage throughout the facility in various residual forms left from previous years of operations.

ULLAH, M K

2001-02-26T23:59:59.000Z

Note: This page contains sample records for the topic "finish line event" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

DTRA Algorithm Prize (Seventh Annual Sequencing, Finishing, Analysis in the Future (SFAF) Meeting 2012)  

ScienceCinema (OSTI)

Christian Whitchurch on the "DTRA Algorithm Prize" at the 2012 Sequencing, Finishing, Analysis in the Future Meeting held June 5-7, 2012 in Santa Fe, New Mexico.

Whitechurch, Christian [Defense Threat Reduction Agency

2013-02-12T23:59:59.000Z

42

Voluntary Protection Program Onsite Review, Plutonium Finishing Plant Closure Project- May 2007  

Broader source: Energy.gov [DOE]

Evaluation to determine whether Plutonium Finishing Plant Closure Project is continuing to perform at a level deserving DOE-VPP Star recognition.

43

Just in Time Webinars: Session 3 – Crossing the Finish Line to Award  

Broader source: Energy.gov [DOE]

This webinar covers the review of the revised proposal, including financing and pricing, through final negotiations, and facilitating timely award of the task order by taking a proactive approach to identifying and meeting the needs of task order approvers and endorsers.

44

EcoCAR 2 races to the finish line | Department of Energy  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelinesProvedDecember 2005DepartmentDecember 2011 EMAB Meeting - DecemberII) - APM

45

Plutonium Finishing Plant. Interim plutonium stabilization engineering study  

SciTech Connect (OSTI)

This report provides the results of an engineering study that evaluated the available technologies for stabilizing the plutonium stored at the Plutonium Finishing Plant located at the hanford Site in southeastern Washington. Further processing of the plutonium may be required to prepare the plutonium for interim (<50 years) storage. Specifically this document provides the current plutonium inventory and characterization, the initial screening process, and the process descriptions and flowsheets of the technologies that passed the initial screening. The conclusions and recommendations also are provided. The information contained in this report will be used to assist in the preparation of the environmental impact statement and to help decision makers determine which is the preferred technology to process the plutonium for interim storage.

Sevigny, G.J.; Gallucci, R.H.; Garrett, S.M.K.; Geeting, J.G.H.; Goheen, R.S.; Molton, P.M.; Templeton, K.J.; Villegas, A.J. [Pacific Northwest Lab., Richland, WA (United States); Nass, R. [Nuclear Fuel Services, Inc. (United States)

1995-08-01T23:59:59.000Z

46

Removal Rate Model for Magnetorheological Finishing of Glass  

SciTech Connect (OSTI)

Magnetorheological finishing (MRF) is a deterministic subaperture polishing process. The process uses a magntorheological (MR) fluid that consists of micrometer-sized, spherical, magnetic carbonyl iron (CI) particles, nonmagnetic polishing abrasives, water, and stabilizers. Material removal occurs when the CI and nonmagnetic polishing abrasives shear material off the surface being polished. We introduce a new MRF material removal rate model for glass. This model contains terms for the near surface mechanical properties of glass, drag force, polishing abrasive size and concentration, chemical durability of the glass, MR fluid pH, and the glass composition. We introduce quantitative chemical predictors for the first time, to the best of our knowledge, into an MRF removal rate model. We validate individual terms in our model separately and then combine all of the terms to show the whole MRF material removal model compared with experimental data. All of our experimental data were obtained using nanodiamond MR fluids and a set of six optical glasses.

DeGroote, J.E.; Marino, A.E.; WIlson, J.P.; Bishop, A.L.; Lambropoulos, J.C.; Jacobs, S.D.

2007-11-14T23:59:59.000Z

47

Computer Aided Design of Automotive Finishes Gary Meyer and Clement Shimizu  

E-Print Network [OSTI]

Computer Aided Design of Automotive Finishes Gary Meyer and Clement Shimizu Department of Computer The principles of computer aided design were applied to the creation of new automotive finishes. A computer of an automotive paint and visualize the appearance of that paint on a three dimensional surface. The program gives

Minnesota, University of

48

Hanford Workers Achieve Success in Difficult Glove Box Project at Plutonium Finishing Plant  

Broader source: Energy.gov [DOE]

RICHLAND, Wash. – EM’s Richland Operations Office and contractor CH2M HILL Plateau Remediation Company (CH2M HILL) recently finished safely separating three glove boxes for removal from Hanford’s Plutonium Finishing Plant (PFP) after months of planning and preparation.

49

Maintenance implementation plan for the Plutonium Finishing Plant. Revision 3  

SciTech Connect (OSTI)

This document outlines the Maintenance Implementation Plan (MIP) for the Plutonium Finishing Plant (PFP) located at the Hanford site at Richland, Washington. This MIP describes the PFP maintenance program relative to DOE order 4330.4B. The MIP defines the key actions needed to meet the guidelines of the Order to produce a cost-effective and efficient maintenance program. A previous report identified the presence of significant quantities of Pu-bearing materials within PFP that pose risks to workers. PFP`s current mission is to develop, install and operate processes which will mitigate these risks. The PFP Maintenance strategy is to equip the facility with systems and equipment able to sustain scheduled PFP operations. The current operating run is scheduled to last seven years. Activities following the stabilization operation will involve an Environmental Impact Statement (EIS) to determine future plant activities. This strategy includes long-term maintenance of the facility for safe occupancy and material storage. The PFP maintenance staff used the graded approach to dictate the priorities of the improvement and upgrade actions identified in Chapter 2 of this document. The MIP documents PFP compliance to the DOE 4330.4B Order. Chapter 2 of the MIP follows the format of the Order in addressing the eighteen elements. As this revision is a total rewrite, no sidebars are included to highlight changes.

Meldrom, C.A.

1996-03-01T23:59:59.000Z

50

Fire hazard analysis for Plutonium Finishing Plant complex  

SciTech Connect (OSTI)

A fire hazards analysis (FHA) was performed for the Plutonium Finishing Plant (PFP) Complex at the Department of Energy (DOE) Hanford site. The scope of the FHA focuses on the nuclear facilities/structures in the Complex. The analysis was conducted in accordance with RLID 5480.7, [DOE Directive RLID 5480.7, 1/17/94] and DOE Order 5480.7A, ''Fire Protection'' [DOE Order 5480.7A, 2/17/93] and addresses each of the sixteen principle elements outlined in paragraph 9.a(3) of the Order. The elements are addressed in terms of the fire protection objectives stated in paragraph 4 of DOE 5480.7A. In addition, the FHA also complies with WHC-CM-4-41, Fire Protection Program Manual, Section 3.4 [1994] and WHC-SD-GN-FHA-30001, Rev. 0 [WHC, 1994]. Objectives of the FHA are to determine: (1) the fire hazards that expose the PFP facilities, or that are inherent in the building operations, (2) the adequacy of the fire safety features currently located in the PFP Complex, and (3) the degree of compliance of the facility with specific fire safety provisions in DOE orders, related engineering codes, and standards.

MCKINNIS, D.L.

1999-02-23T23:59:59.000Z

51

Pollution prevention and water conservation in metals finishing operations  

SciTech Connect (OSTI)

Attleboro, Massachusetts is the headquarters of the Materials and Controls Group of Texas Instruments Incorporated (Texas Instruments). In support of their activities, Texas Instruments operates a number of metal finishing and electroplating processes. The water supply and the wastewater treatment requirements are supplied throughout the facility from a central location. Water supply quality requirements varies with each manufacturing operation. As a result, manufacturing operations are classified as either high level or a lower water quality. The facility has two methods of wastewater treatment and disposal. The first method involves hydroxide and sulfide metals precipitation prior to discharge to a surface water. The second method involves metals precipitation, filtration, and discharge via sewer to the Attleboro WTF. The facility is limited to a maximum wastewater discharge of 460,000 gallons per day to surface water under the existing National Pollution Discharge Elimination System (NPDES) permit. There is also a hydraulic flow restriction on pretreated wastewater that is discharged to the Attleboro WTF. Both of these restrictions combined with increased production could cause the facility to reach the treatment capacity. The net effect is that wastewater discharge problems are becoming restrictive to the company`s growth. This paper reviews Texas Instruments efforts to overcome these restrictions through pollution prevention and reuse practices rather than expansion of end of pipe treatment methods.

O`Shaughnessy, J.; Clark, W. [Worcester Polytechnic Inst., MA (United States); Lizotte, R.P. Jr.; Mikutel, D. [Texas Instruments Inc., Attleboro, MA (United States)

1996-11-01T23:59:59.000Z

52

Establishing an authorization basis for the Plutonium Finishing Plant  

SciTech Connect (OSTI)

In the summer of 1998, Hanford's Plutonium Finishing Plant (PFP) project prepared to restart its thermal stabilization process after 1(1/2)-yr suspension in operations. The facility had overcome a number of operational and safety problems, yet it had been unable to achieve appropriate update, approval, and implementation of an appropriate, current authorization basis. This problem threatened to prevent a timely restart, which, in turn, could have caused a loss in momentum and dampened enthusiasm within the facility. The authors describe the approach taken by B and W Hanford Company (BWHC) in conjunction with its partners, the US Department of Energy (DOE) Richland Operations Office and Fluor Daniel Hanford Company (FDH), to establish a defensible authorization basis, which allowed the facility to resume its mission of stabilizing reactive plutonium materials. The approach incorporates methods used within the DOE complex for short-term activities and those undergoing deactivation and implements principles of integrated safety management (ISM), as described in ``Defense Nuclear Facility Safety Board [(DNFSB)] Recommendation 95-2'' and related documents.

Roege, P.E.; Ramble, A.L.

1999-07-01T23:59:59.000Z

53

Events Calendar  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest Region service area. TheEPSCI Home It isGasERP Submit an event orCalendar »

54

Use of Optical Mapping to Aid in Assembly and Finishing of Human Microbiome Genome Projects  

SciTech Connect (OSTI)

Trevor Wagner of OpGen, Inc. discusses the use of optical mapping to validate the assembly of HMP genomes on June 3, 2010 at the "Sequencing, Finishing, Analysis in the Future" meeting in Santa Fe, NM

Wagner, Trevor [OpGen, Inc

2010-06-03T23:59:59.000Z

55

35461,"AECTRA REFG & MKTG",1,152,"MOTOR GAS, OTHER FINISHED"...  

U.S. Energy Information Administration (EIA) Indexed Site

& MKTG",3,152,"MOTOR GAS, OTHER FINISHED",1803,"JACKSONVILLE, FL","FLORIDA",1,428,"GERMANY",190,0,0,,,,, 35461,"AECTRA REFG & MKTG",4,152,"MOTOR GAS, OTHER...

56

Pilon: Automated Assembly Improvement Software (Seventh Annual Sequencing, Finishing, Analysis in the Future (SFAF) Meeting 2012)  

SciTech Connect (OSTI)

Bruce Walker on "Pilon: Automated Assembly Improvement Software" at the 2012 Sequencing, Finishing, Analysis in the Future Meeting held June 5-7, 2012 in Santa Fe, New Mexico.

Walker, Bruce (Broad Institute) [Broad Institute

2012-06-01T23:59:59.000Z

57

Feeding Value of Wet Sorghum Distillers Grains for Growing and Finishing Beef Cattle  

E-Print Network [OSTI]

Feeding Value of Wet Sorghum Distillers Grains for Growing and Finishing Beef Cattle Ethanol, but sorghum grain is commonly either blended with corn before use or used as the sole grain for ethanol

58

Metagenomics for Etiologic Agent Discovery (Seventh Annual Sequencing, Finishing, Analysis in the Future (SFAF) Meeting 2012)  

ScienceCinema (OSTI)

Matthew Ross on "Metagenomics for etiological agent discovery" at the 2012 Sequencing, Finishing, Analysis in the Future Meeting held June 5-7, 2012 in Santa Fe, New Mexico.

Ross, Matthew [Baylor College of Medicine

2013-02-11T23:59:59.000Z

59

Signature Peptide-Enabled Metagenomics (Seventh Annual Sequencing, Finishing, Analysis in the Future (SFAF) Meeting 2012)  

ScienceCinema (OSTI)

Ben McMahon of Los Alamos National Laboratory (LANL) presents "Signature Peptide-Enabled Metagenomics" at the 7th Annual Sequencing, Finishing, Analysis in the Future (SFAF) Meeting held in June, 2012 in Santa Fe, NM.

McMahon, Ben [LANL

2013-01-25T23:59:59.000Z

60

Pilon: Automated Assembly Improvement Software (Seventh Annual Sequencing, Finishing, Analysis in the Future (SFAF) Meeting 2012)  

ScienceCinema (OSTI)

Bruce Walker on "Pilon: Automated Assembly Improvement Software" at the 2012 Sequencing, Finishing, Analysis in the Future Meeting held June 5-7, 2012 in Santa Fe, New Mexico.

Walker, Bruce (Broad Institute)

2013-02-11T23:59:59.000Z

Note: This page contains sample records for the topic "finish line event" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Technical Basis for Work Place Air Monitoring for the Plutonium Finishing Plan (PFP)  

SciTech Connect (OSTI)

This document establishes the basis for the Plutonium Finishing Plant's (PFP) work place air monitoring program in accordance with the following requirements: Title 10, Code of Federal Regulations (CFR), Part 835 ''Occupational Radiation Protection''; Hanford Site Radiological Control Manual (HSRCM-1); HNF-PRO-33 1, Work Place Air Monitoring; WHC-SD-CP-SAR-021, Plutonium Finishing Plant Final Safety Analysis Report; and Applicable recognized national standards invoked by DOE Orders and Policies.

JONES, R.A.

1999-10-06T23:59:59.000Z

62

Graphical Event Models Causal Event Models  

E-Print Network [OSTI]

stream is a time-stamped stream of labeled events. This type of data is pervasive: datacenter event logs. #12;Temporal Event Sequences: Event Logs from a Datacenter 2:15 pm 2:30 pm 2:45 pm 3:00 pm Send

Glymour, Clark

63

Sequential event prediction  

E-Print Network [OSTI]

In sequential event prediction, we are given a “sequence database” of past event sequences to learn from, and we aim to predict the next event within a current event sequence. We focus on applications where the set of the ...

Letham, Benjamin

64

Dry, reconstituted, and early harvested sorghum grain for finishing cattle  

E-Print Network [OSTI]

upon a number of, factors such as diameter& length and revolving speed of the auger. A steady flow of dry grain and water must be maintained into the mixing auger in order to obtain proper and uniform water application. For a given installation... commenced. Reconstituting was accomplish . d by making use of a 70-foot auger conveyor, nine inches in diameter (Figure li. Water was added by metering into a one inch line located above the auger. Grain flow rate was regulated by use of a variable...

Parrett, Ned Albert

1968-01-01T23:59:59.000Z

65

Use of cottonseed hulls, rice hulls, and ammoniated rice hulls for finishing calves commercially  

E-Print Network [OSTI]

USE OF COTTONSEED HULLS, RICE HULLS, AND AMMONIATED RICE HULLS FOR FINISHING CALVES COMMERCIALLY A Theste NORMAN FINLEY VESTAL Subxnttted to the Graduate CoIlege of the Teaac W hhf Uxdvers@y;M -: partfal AdBHaioct:if the reqsh;~ Air. the.... degree-. -cf MASTER OF SCIENCE August 1967 MaJor Subject: ' Anginal Science . USE OF COTTONSEED HULLS, RICE HULLS, AND AMMONIATED RICE HULLS FOR FINISHING CALVES COMMERCIALLY A Tbesls NORMAN FINLEY VESTAL Approved as to style and content by. ) I...

Vestal, Norman Finley

1967-01-01T23:59:59.000Z

66

Au microstructure and the functional properties of Ni/Au finishes on ceramic IC packages  

SciTech Connect (OSTI)

Ni/Au plated finishes used on thick-film metallized multilayer ceramic packages for integrated circuits must meet functional requirements such as bondability, sealability, and solderability. Their ability to do so is dependent, among other things, on the ability of the Au deposit to inhibit the grain boundary diffusion and subsequent surface oxidation of Ni. In this study, the relation between functional performance, Ni diffusionr ate, and Au microstructure was examined. Extent of Ni diffusion during heating was determined by Auger electron spectroscopy for several electrolytic and electroless Ni/Au finishing processes. Results were correlated with differences in Au microstructures determined by SEM, atomic force microscopy, and XRD.

Winters, E.D.; Baxter, W.K. [Coors Electronic Package Co., Chattanooga, TN (United States); Braski, D.N.; Watkins, T.R. [Oak Ridge National Lab., TN (United States)

1995-12-31T23:59:59.000Z

67

Estimation and characterization of decontamination and decommissioning solid waste expected from the Plutonium Finishing Plant  

SciTech Connect (OSTI)

Purpose of the study was to estimate the amounts of equipment and other materials that are candidates for removal and subsequent processing in a solid waste facility when the Hanford Plutonium Finishing Plant is decontaminated and decommissioned. (Building structure and soil are not covered.) Results indicate that {approximately}5,500 m{sup 3} of solid waste is expected to result from the decontamination and decommissioning of the Pu Finishing Plant. The breakdown of the volumes and percentages of waste by category is 1% dangerous solid waste, 71% low-level waste, 21% transuranic waste, 7% transuranic mixed waste.

Millar, J.S.; Pottmeyer, J.A.; Stratton, T.J. [and others

1995-01-01T23:59:59.000Z

68

Third and fourth limiting amino acids in sorghum for growing and finishing swine  

E-Print Network [OSTI]

-methionine (Met) and L-isoleucine (Ile) were added individually and in all combinations to a vitamin, mineral, lysine and threonine fortified sorghum basal diet (B) and fed to growing and finishing pigs (18. 1 and 50. 0 kg average initial weight, respectively...). The B diet was formulated with equimolar additions of glycine (Gly) and L-glutamic acid (Glu) to provide 12. 0 and 11. 5X crude protein (N x 6. 25) for growing and finish- ing diets, respectively. Trp, Met and Ile were added at the expense of Gly...

Purser, Kenneth Wayne

1976-01-01T23:59:59.000Z

69

Plutonium Finishing Plan (PFP) Treatment and Storage Unit Interim Status Closure Plan  

SciTech Connect (OSTI)

This document describes the planned activities and performance standards for closing the Plutonium Finishing Plant (PFP) Treatment and Storage Unit. The PFP Treatment and Storage Unit is located within the 234-52 Building in the 200 West Area of the Hanford Facility. Although this document is prepared based upon Title 40 Code of Federal Regulations (CFR), Part 265, Subpart G requirements, closure of the unit will comply with Washington Administrative Code (WAC) 173-303-610 regulations pursuant to Section 5.3 of the Hanford Federal Facility Agreement and Consent Order (Tri-Party Agreement) Action Plan (Ecology et al. 1996). Because the PFP Treatment and Storage Unit manages transuranic mixed (TRUM) waste, there are many controls placed on management of the waste. Based on the many controls placed on management of TRUM waste, releases of TRUM waste are not anticipated to occur in the PFP Treatment and Storage Unit. Because the intention is to clean close the PFP Treatment and Storage Unit, postclosure activities are not applicable to this closure plan. To clean close the unit, it will be demonstrated that dangerous waste has not been left onsite at levels above the closure performance standard for removal and decontamination. If it is determined that clean closure is not possible or is environmentally impractical, the closure plan will be modified to address required postclosure activities. The PFP Treatment and Storage Unit will be operated to immobilize and/or repackage plutonium-bearing waste in a glovebox process. The waste to be processed is in a solid physical state (chunks and coarse powder) and will be sealed into and out of the glovebox in closed containers. The containers of immobilized waste will be stored in the glovebox and in additional permitted storage locations at PFP. The waste will be managed to minimize the potential for spills outside the glovebox, and to preclude spills from reaching soil. Containment surfaces will be maintained to ensure integrity. In the unlikely event that a waste spill does occur outside the glovebox, operating methods and administrative controls will require that waste spills be cleaned up promptly and completely, and a notation will be made in the operating record. Because dangerous waste does not include source, special nuclear, and by-product material components of mixed waste, radionuclides are not within the scope of this documentation. The information on radionuclides is provided only for general knowledge.

PRIGNANO, A.L.

2000-07-01T23:59:59.000Z

70

Figure and finish characterization of high performance metal mirrors  

SciTech Connect (OSTI)

Most metal mirrors currently used in synchrotron radiation (SR) beam lines to reflect soft x-rays are made of electroless nickel plate on an aluminum substrate. This material combination has allowed optical designers to incorporate exotic cylindrical aspheres into grazing incidence x-ray beam-handling systems by taking advantage of single-point diamond machining techniques. But the promise of high-quality electroless nickel surfaces has generally exceeded the performance. We will examine the evolution of electroless nickel surfaces through a study of the quality of mirrors delivered for use at the National Synchrotron Light Source over the past seven years. We have developed techniques to assess surface quality based on the measurement of surface roughness and figure errors with optical profiling instruments. It is instructive to see how the quality of the surface is related to the complexity of the machine operations required to produce it.

Takacs, P.Z. [Brookhaven National Lab., Upton, NY (United States); Church, E.L. [Army Armament Research and Development Command, Dover, NJ (United States)

1991-10-01T23:59:59.000Z

71

NREL: Wind Research - Events  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Events Below are upcoming events related to wind energy technology. January 2015 2015 Wind Energy Systems Engineering Workshop January 14 - 15, 2015 Boulder, CO The third NREL Wind...

72

Adsorption of Chromium (VI) by metal hydroxide sludge from the metal finishing  

E-Print Network [OSTI]

and Management, United States (2008)" #12;2 1 Introduction Industrial aqueous pollution (heavy metals) accounts sludge (MHS) during the treatment of their liquid effluents charged with heavy metals. Generally, a small for 30 to 40% of industrial pollution. Metal finishing is one of the sectors which contributes mostly

Paris-Sud XI, Université de

73

Assessment of circuit board surface finishes for electronic assembly with lead-free solders  

SciTech Connect (OSTI)

The suitability of various metallic printed wiring board surface finishes was assessed for new technology applications that incorporate assembly with Lead-free solders. The manufacture of a lead-free product necessitates elimination of lead (Pb) from the solder, the circuit board as well as the component lead termination. It is critical however for the selected interconnect Pb-free solder and the corresponding printed wiring board (PWB) and component lead finishes to be mutually compatible. Baseline compatibility of select Pb-free solders with Pb containing PWB surface finish and components was assessed. This was followed by examining the compatibility of the commercially available CASTIN{trademark} (SnAgCuSb) Pb-free solder with a series of PWB metallic finishes: Ni/Au, Ni/Pd, and Pd/Cu. The compatibility was assessed with respect to assembly performance, solder joint integrity and long term attachment reliability. Solder joint integrity and mechanical behavior of representative 50 mil pitch 20I/O SOICs was determined before and after thermal stress. Mechanical pull test studies demonstrated that the strength of SnAgCuSb solder interconnections is notably greater than that of SnPb interconnections.

Ray, U.; Artaki, I.; Finley, D.W.; Wenger, G.M. [Bell Labs., Princeton, NJ (United States). Lucent Technologies; Pan, T.; Blair, H.D.; Nicholson, J.M. [Ford Motor Co., Dearborn, MI (United States); Vianco, P.T. [Sandia National Labs., Albuquerque, NM (United States)

1996-10-01T23:59:59.000Z

74

Finishing and Special Motifs: Lessons Learned from CRISPR Analysis Using Next-Generation Draft Sequences ( 7th Annual SFAF Meeting, 2012)  

ScienceCinema (OSTI)

Catherine Campbell on "Finishing and Special Motifs: Lessons learned from CRISPR analysis using next-generation draft sequences" at the 2012 Sequencing, Finishing, Analysis in the Future Meeting held June 5-7, 2012 in Santa Fe, New Mexico.

Campbell, Catherine [Noblis

2013-03-22T23:59:59.000Z

75

Dynamics of Charged Events  

SciTech Connect (OSTI)

In three spacetime dimensions the world volume of a magnetic source is a single point, an event. We make the event dynamical by regarding it as the imprint of a flux-carrying particle impinging from an extra dimension. This can be generalized to higher spacetime dimensions and to extended events. We exhibit universal observable consequences of the existence of events and argue that events are as important as particles or branes. We explain how events arise on the world volume of membranes in M theory, and in a Josephson junction in superconductivity.

Bachas, Constantin [Laboratoire de Physique Theorique de l'Ecole Normale Superieure, 24 rue Lhomond, 75231 Paris cedex (France); Bunster, Claudio [Centro de Estudios Cientificos (CECS), Avenida Arturo Prat 514, Valdivia (Chile); Henneaux, Marc [Physique Theorique et Mathematique, Universite Libre de Bruxelles and International Solvay Institutes, ULB Campus Plaine C.P. 231, 1050 Bruxelles (Belgium); Centro de Estudios Cientificos (CECS), Avenida Arturo Prat 514, Valdivia (Chile)

2009-08-28T23:59:59.000Z

76

Project plan remove special nuclear material from PFP project plutonium finishing plant  

SciTech Connect (OSTI)

This plan presents the overall objectives, description, justification and planning for the Plutonium Finishing Plant (PFP) Remove Special Nuclear Material (SNM) Materials. The intent of this plan is to describe how this project will be managed and integrated with other facility stabilization and deactivation activities. This plan supplements the overall integrated plan presented in the Plutonium Finishing Plant Integrated Project Management Plan (IPMP), HNF-3617, Rev. 0. This project plan is the top-level definitive project management document for PFP Remove SNM Materials project. It specifies the technical, schedule, requirements and the cost baselines to manage the execution of the Remove SNM Materials project. Any deviations to the document must be authorized through the appropriate change control process.

BARTLETT, W.D.

1999-05-13T23:59:59.000Z

77

Grain sorghum, reconstituted in whole and in ground forms, in finishing rations for beef cattle  

E-Print Network [OSTI]

of the grain, is kept by the embryo, the . , only tissue capable of growth. All of the methods described in this work have brought about increases in feed efficiency. It appears that reconstituting brings into play mechanisms similar to those observed... GRAIN SORGHUM, RECONSTITUTED IN WHOLE AND IN GROUND BOHMS, IN FINISHING RATIONS FOR BEEF CATTLE A Thesis PETER PENIC Submitted to the Graduate College of' the Texas A&M University in partial fulfillment of the requirements for the degree...

Penic, Peter

1968-01-01T23:59:59.000Z

78

Plutonium Finishing Plant (PFP) Standards/Requirements Identification Document (S/RID)  

SciTech Connect (OSTI)

This Standards/Requirements Identification Document (S/RID) sets forth the Environmental Safety and Health (ESH) standards/requirements for the Plutonium Finishing Plant (PFP). This S/RID is applicable to the appropriate life cycle phases of design, construction, operation, and preparation for decommissioning. These standards/requirements are adequate to ensure the protection of the health and safety of workers, the public, and the environment.

Maddox, B.S.

1996-01-01T23:59:59.000Z

79

DISCOUNTED EVENT PERMIT REQUEST  

E-Print Network [OSTI]

DISCOUNTED EVENT PERMIT REQUEST Discounted daily parking rates are available for CSM events where or the daily scratch off permits: COMMUTER LOTS: $3.00 / day GENERAL LOTS: $4.00 / day Please e-mail or drop

80

Mercury: Next-gen Data Analysis and Annotation Pipeline (Seventh Annual Sequencing, Finishing, Analysis in the Future (SFAF) Meeting 2012)  

ScienceCinema (OSTI)

David Sexton (Baylor) gives a talk titled "Mercury: Next-gen Data Analysis and Annotation Pipeline" at the 7th Annual Sequencing, Finishing, Analysis in the Future (SFAF) Meeting held in June, 2012 in Santa Fe, NM.

Sexton, David [Baylor

2013-01-25T23:59:59.000Z

Note: This page contains sample records for the topic "finish line event" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

The PerkinElmer Omics Laboratory (Seventh Annual Sequencing, Finishing, Analysis in the Future (SFAF) Meeting 2012)  

ScienceCinema (OSTI)

Todd Smith of the PerkinElmer Omics Laboratory gives a talk about his lab and its work at the 7th Annual Sequencing, Finishing, Analysis in the Future (SFAF) Meeting held in June, 2012 in Santa Fe, NM.

Smith, Todd [PerkinElmer Omics Laboratory

2013-01-25T23:59:59.000Z

82

High Throughput Plasmid Sequencing with Illumina and CLC Bio (Seventh Annual Sequencing, Finishing, Analysis in the Future (SFAF) Meeting 2012)  

ScienceCinema (OSTI)

Ajay Athavale (Monsanto) presents "High Throughput Plasmid Sequencing with Illumina and CLC Bio" at the 7th Annual Sequencing, Finishing, Analysis in the Future (SFAF) Meeting held in June, 2012 in Santa Fe, NM.

Athavale, Ajay [Monsanto

2013-01-25T23:59:59.000Z

83

Introducing National Center for Genome Resources (NCGR) Informatics (Seventh Annual Sequencing, Finishing, Analysis in the Future (SFAF) Meeting 2012)  

ScienceCinema (OSTI)

John Crow from the National Center for Genome Resources discusses his organization's informatics at the 7th Annual Sequencing, Finishing, Analysis in the Future (SFAF) Meeting held in June, 2012 in Santa Fe, NM.

Crow, John [National Center for Genome Resources

2013-01-25T23:59:59.000Z

84

Key Events Timeline  

Broader source: Energy.gov [DOE]

This document lists key events beginning with the April 20 fire on the Deepwater Horizon through July 28th. Updated July 28, 2010.

85

INL Calendar of Events  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Working with INL Community Outreach Visitor Information Calendar of Events ATR National Scientific User Facility Center for Advanced Energy Studies Light Water Reactor...

86

Alfalfa leaf meal in finishing steer diets. Quarterly report, July 1, 1997--September 30, 1997  

SciTech Connect (OSTI)

Ninety-six medium frame, Angus and Angus cross steer calves (average initial weight 540 lb.) were allotted to a heavy or light weight block and then randomly assigned to one of four dietary treatments for a 167 or 189-day finishing phase, respectively. Treatments were control (supplemental soybean meal), alfalfa leaf meal (ALM) providing 33%, 66%, 100% of supplemental protein. Finishing diets were formulated to contain .61 Mcal NE{sub g}/lb dry matter, 12.5% crude protein, .6 % Ca and .3 % P. There were no significant (P >.05) effects of dietary treatments on daily gain or dry matter required /lb of gain. Steers fed 100 % ALM consumed more (P <.05) dry matter than steers fed either of the other three treatments. Dry matter consumption increased linearly (P >.05) with increasing ALM. There was no significant (P >.05) dietary treatment effect on marbling, KPH %, yield grade, quality grade, or liver abscesses. There was an apparent trend in reduced liver abscess incidence in steers fed 100 % ALM. Steers fed 66 % ALM had significantly (P <.05) greater backfat measurements, backfat also had a cubic effect (P <.05). Hot carcass weight had a quadratic relation (P <.05) with level of ALM. Substituting alfalfa leaf meal for soybean meal in diets of finishing steers increased DM intake, but this increase was accompanied by an increase in gain which resulted in similar feed efficiency. There may be an advantage in blending ALM and soybean meal as feed efficiency was improved when cattle were fed the blend. Also, feeding ALM may result in lower incidence of liver abscess.

Zehnder, C.M.; DiCostanzo, A.; Smith, L.B.; Brown, D.B.; Hall, J.M.

1997-10-30T23:59:59.000Z

87

Roughage and roughage substitutes in high concentrate finishing mixtures for beef cattle  

E-Print Network [OSTI]

different levels of roughage, showed that maximum levels of 20 to 30% cottonseed hulls, 20 to 30% coastal bermuda hay, 10 to 20/o rice hulls (ammoniated or non-ammoniated) or 10/o flax shives should be used in finishing mixtures if high gain and feed... into four uniform groups on the basis of weight and grade. These groups received four different feed mixtures as follows: all concentrate, 2 and 4%%uo oyster shell flakes and 10% ammoniated rice hulls. The second and third experiments were part of Texas...

Leigh, Jorge Eduardo

1968-01-01T23:59:59.000Z

88

Event generator overview  

SciTech Connect (OSTI)

Due to their ability to provide detailed and quantitative predictions, the event generators have become an important part of studying relativistic heavy ion physics and of designing future experiments. In this talk, the author will briefly summarize recent progress in developing event generators for the relativistic heavy ion collisions.

Pang, Y.

1997-12-01T23:59:59.000Z

89

Features, Events, and Processes: Disruptive Events  

SciTech Connect (OSTI)

The primary purpose of this analysis is to evaluate seismic- and igneous-related features, events, and processes (FEPs). These FEPs represent areas of natural system processes that have the potential to produce disruptive events (DE) that could impact repository performance and are related to the geologic processes of tectonism, structural deformation, seismicity, and igneous activity. Collectively, they are referred to as the DE FEPs. This evaluation determines which of the DE FEPs are excluded from modeling used to support the total system performance assessment for license application (TSPA-LA). The evaluation is based on the data and results presented in supporting analysis reports, model reports, technical information, or corroborative documents that are cited in the individual FEP discussions in Section 6.2 of this analysis report.

J. King

2004-03-31T23:59:59.000Z

90

Event-by-Event Fission with FREYA  

SciTech Connect (OSTI)

The recently developed code FREYA (Fission Reaction Event Yield Algorithm) generates large samples of complete fission events, consisting of two receding product nuclei as well as a number of neutrons and photons, all with complete kinematic information. Thus it is possible to calculate arbitrary correlation observables whose behavior may provide unique insight into the fission process. The presentation first discusses the present status of FREYA, which has now been extended up to energies where pre-equilibrium emission becomes significant and one or more neutrons may be emitted prior to fission. Concentrating on {sup 239}Pu(n,f), we discuss the neutron multiplicity correlations, the dependence of the neutron energy spectrum on the neutron multiplicity, and the relationship between the fragment kinetic energy and the number of neutrons and their energies. We also briefly suggest novel fission observables that could be measured with modern detectors.

Randrup, J; Vogt, R

2010-11-09T23:59:59.000Z

91

Features, Events, and Processes: Disruptive Events  

SciTech Connect (OSTI)

The purpose of this analysis report is to evaluate and document the inclusion or exclusion of the disruptive events features, events, and processes (FEPs) with respect to modeling used to support the total system performance assessment for license application (TSPA-LA). A screening decision, either ''Included'' or ''Excluded,'' is given for each FEP, along with the technical basis for screening decisions. This information is required by the U.S. Nuclear Regulatory Commission (NRC) at 10 CFR 63.114 (d), (e), and (f) [DIRS 156605]. The FEPs addressed in this report deal with both seismic and igneous disruptive events, such as fault displacements through the repository and an igneous intrusion into the repository. For included FEPs, this analysis summarizes the implementation of the FEP in TSPA-LA (i.e., how the FEP is included). For excluded FEPs, this analysis provides the technical basis for exclusion from TSPA-LA (i.e., why the FEP is excluded). Previous versions of this report were developed to support the total system performance assessments (TSPA) for various prior repository designs. This revision addresses the repository design for the license application (LA).

P. Sanchez

2004-11-08T23:59:59.000Z

92

Aerobic treatability of waste effluent from the leather finishing industry. Master's thesis  

SciTech Connect (OSTI)

The Seton Company supplies finished leather products exclusively for the automotive industry. In the process of finishing leather, two types of wastewaters are generated. The majority of the wastewater is composed of water-based paint residuals while the remainder is composed of solvent-based coating residuals. Aerobic treatability studies were conducted using water-based and solvent-based waste recirculatory waters from the Seton Company's Saxton, Pennsylvania processing plant. The specific objective was to determine the potential for using aerobic biological processes to biodegrade the industry's wastes and determine the potential for joint treatment at the local publicly owned treatment works (POTW). This study was accomplished in two phases. Phase I was conducted during the Spring Semester 1993 and consisted of aerobic respirometer tests of the raw wastes and mass balance analysis. The results of Phase I were published in a report to the Seton Company as Environmental Resources Research Institute project number 92C.II40R-1. Phase II was conducted during the Summer Semester 1993 and consisted of bench-scale reactor tests and additional aerobic respirometer tests. The aerobic respirometer batch tests and bench-scale reactor tests were used to assess the treatability of solvent-based and water-based wastewaters and determine the degree of biodegradability of the wastewaters. Mass balance calculations were made using measured characteristics.

Vinger, J.A.

1993-12-01T23:59:59.000Z

93

DVU Featured Training & Events ...  

Broader source: Energy.gov (indexed) [DOE]

Featured Training & Events Form Please complete this form in its entirety and email to AskTheDvu@hq.doe.gov 1. Course Title: 2. Course StartEnd Date: 3. StartEnd Time (Time zone...

94

Monte Carlo event generators  

SciTech Connect (OSTI)

I review recent progress in the physics of parton shower Monte Carlos, emphasizing the ideas which allow the inclusion of higher-order matrix elements into the framework of event generators.

Frixione, Stefano [INFN, Sezione di Genova, Via Dodecaneso 33, 16146 Genova (Italy)

2005-10-06T23:59:59.000Z

95

QCD (&) event generators  

SciTech Connect (OSTI)

Recent developments in QCD phenomenology have spurred on several improved approaches to Monte Carlo event generation, relative to the post-LEP state of the art. In this brief review, the emphasis is placed on approaches for (1) consistently merging fixed-order matrix element calculations with parton shower descriptions of QCD radiation, (2) improving the parton shower algorithms themselves, and (3) improving the description of the underlying event in hadron collisions.

Skands, Peter Z.; /Fermilab

2005-07-01T23:59:59.000Z

96

Seismic event classification system  

DOE Patents [OSTI]

In the computer interpretation of seismic data, the critical first step is to identify the general class of an unknown event. For example, the classification might be: teleseismic, regional, local, vehicular, or noise. Self-organizing neural networks (SONNs) can be used for classifying such events. Both Kohonen and Adaptive Resonance Theory (ART) SONNs are useful for this purpose. Given the detection of a seismic event and the corresponding signal, computation is made of: the time-frequency distribution, its binary representation, and finally a shift-invariant representation, which is the magnitude of the two-dimensional Fourier transform (2-D FFT) of the binary time-frequency distribution. This pre-processed input is fed into the SONNs. These neural networks are able to group events that look similar. The ART SONN has an advantage in classifying the event because the types of cluster groups do not need to be pre-defined. The results from the SONNs together with an expert seismologist's classification are then used to derive event classification probabilities. 21 figures.

Dowla, F.U.; Jarpe, S.P.; Maurer, W.

1994-12-13T23:59:59.000Z

97

Seismic event classification system  

DOE Patents [OSTI]

In the computer interpretation of seismic data, the critical first step is to identify the general class of an unknown event. For example, the classification might be: teleseismic, regional, local, vehicular, or noise. Self-organizing neural networks (SONNs) can be used for classifying such events. Both Kohonen and Adaptive Resonance Theory (ART) SONNs are useful for this purpose. Given the detection of a seismic event and the corresponding signal, computation is made of: the time-frequency distribution, its binary representation, and finally a shift-invariant representation, which is the magnitude of the two-dimensional Fourier transform (2-D FFT) of the binary time-frequency distribution. This pre-processed input is fed into the SONNs. These neural networks are able to group events that look similar. The ART SONN has an advantage in classifying the event because the types of cluster groups do not need to be pre-defined. The results from the SONNs together with an expert seismologist's classification are then used to derive event classification probabilities.

Dowla, Farid U. (Castro Valley, CA); Jarpe, Stephen P. (Brentwood, CA); Maurer, William (Livermore, CA)

1994-01-01T23:59:59.000Z

98

Evaluating an Exterior Insulation and Finish System for Deep Energy Retrofits  

SciTech Connect (OSTI)

Exterior insulation and finish systems (EIFS) are proprietary synthetic formulations that are applied to the exterior walls of buildings to serve as insulation and exterior cladding. The insulation thickness can vary from less than one inch to a foot or more. In this project the applicability of EIFS for residential deep energy retrofits was investigated through modeling and a case study home. The home was retrofitted using a site-applied four-inch-thick EIFS. Site-specific details were developed as required for the residential retrofit application. Site work and the costs of the EIFS system were documented. The demonstration home was modeled using Building Energy Optimization energy and cost analysis software to explore cost effectiveness of various EIFS insulation thicknesses in two climate locations.

Dentz, J.; Podorson, D.

2014-01-01T23:59:59.000Z

99

Characterization of past and present solid waste streams from the plutonium finishing plant  

SciTech Connect (OSTI)

During the next two decades the transuranic (TRU) wastes now stored in the burial trenches and storage facilities at the Hanford Site are to be retrieved, processed at the Waste Receiving and Processing (WRAP) Facility, and shipped to the Waste Isolation Pilot Plant (WIPP) near Carlsbad, New Mexico for final disposal. Over 50% of the TRU waste to be retrieved for shipment to the WIPP has been generated at the Plutonium Finishing Plant (PFP), also known as the Plutonium Processing and Storage Facility and Z Plant. The purpose of this report is to characterize the radioactive solid wastes generated by the PFP since its construction in 1947 using process knowledge, existing records, and history-obtained from interviews. The PFP is currently operated by Westinghouse Hanford Company (WHC) for the US Department of Energy (DOE).

Duncan, D R; Mayancsik, B A [Westinghouse Hanford Co., Richland, WA (United States)] [Westinghouse Hanford Co., Richland, WA (United States); Pottmeyer, J A; Vejvoda, E J; Reddick, J A; Sheldon, K M; Weyns, M I [Los Alamos Technical Associates, Kennewick, WA (United States)] [Los Alamos Technical Associates, Kennewick, WA (United States)

1993-02-01T23:59:59.000Z

100

Role of surface finishing on pitting corrosion of a duplex stainless steel in seawater  

SciTech Connect (OSTI)

Localized corrosion of duplex UNS S32550 stainless steel in seawater was investigated in the laboratory and in field trials for several surface finish conditions: polished, ground, and sandblasted. Electrochemical data obtained by polarization curves showed that the smoother, polished surface had better characteristics (higher pitting and protection potentials) than the ground or sandblasted surfaces. However, despite its high degree of roughness, the sandblasted surface was the most resistant in field conditions, exhibiting the lowest number of sites attacked. Internal compressive stresses created by sandblasting seem also to have an unsensitizing effect on sensitized zones that exist in cast steel (due to repairs of mold defects), reducing its susceptibility to microbiologically influenced corrosion (MIC). Such stresses are not generated in polished or ground surfaces, and localized MIC attack can occur.

Salah-Rousset, N.B.; Chaouachi, M.A. [ENIT, Tunis (Tunisia). Lab. of Metallurgy and Materials; Chellouf, A. [STEG, Tunis (Tunisia)

1996-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "finish line event" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Project plan international atomic energy agency (IAEA) safeguards project plutonium finishing plant  

SciTech Connect (OSTI)

This plan presents the overall objectives, description, justification and planning for the Plutonium Finishing Plant (PFP) International Atomic Energy Agency (IAEA) project. The intent of this plan is to describe how this project will be managed and integrated with other facility stabilization and deactivation activities. This plan supplements the overall integrated plan presented in the PFP Integrated Project Management Plan (PMP), HNF-3617, Rev. 0. This project plan is the top-level definitive project management document for the PFP IAEA project. It specifies the technical, schedule, requirements and the cost baselines to manage the execution of the IAEA project. Any deviations to the document must be authorized through the appropriate change control process.

BARTLETT, W.D.

1999-05-13T23:59:59.000Z

102

Evaluating sealed storage of high moisture sorghum grain for a beef finishing program  

E-Print Network [OSTI]

Bedaced coNan and rice, . cro. ge has resulted in a search for crops of hip& ecoiiomic return. har;w corsages h. =ve bean pi". uted to grain sor, -hum and, h ve proluced nigh yields. T%s, problem of, attkising this sorghum grain has sparked 4 grominp...~:fora ~ainee rn aver -j. ?s. of 2. l6 pounIls ~sr Dog, rhile thnie fel, ~nle ~in ~ in& 2. . 'I6 . ". our8O-~er 8:g. . i hi~her i -i . , Qsgres'o'f finish pgihishnr aellin, , price ve"s ohtcinel an 'ths steers fe4 tho' prounIi gs, g, ', Ponos statee. that enr...

Cross, Julian Frederick

2012-06-07T23:59:59.000Z

103

The chemistry of tributyl phosphate at elevated temperatures in the Plutonium Finishing Plant Process Vessels  

SciTech Connect (OSTI)

Potentially violent chemical reactions of the tributyl phosphate solvent used by the Plutonium Finishing Plant at the Hanford Site were investigated. There is a small probability that a significant quantity of this solvent could be accidental transferred to heated process vessels and react there with nitric acid or plutonium nitrate also present in the solvent extraction process. The results of laboratory studies of the reactions show that exothermic oxidation of tributyl phosphate by either nitric acid or actinide nitrates is slow at temperatures expected in the heated vessels. Less than four percent of the tributyl phosphate will be oxidized in these vented vessels at temperatures between 125{degrees}C and 250{degrees}C because the oxidant will be lost from the vessels by vaporization or decomposition before the tributyl phosphate can be extensively oxidized. The net amounts of heat generated by oxidation with concentrated nitric acid and with thorium nitrate (a stand-in for plutonium nitrate) were determined to be about -150 and -220 joules per gram of tributyl phosphate initially present, respectively. This is not enough heat to cause violent reactions in the vessels. Pyrolysis of the tributyl phosphate occurred in these mixtures at temperatures of 110{degrees}C to 270{degrees}C and produced mainly 1-butene gas, water, and pyrophosphoric acid. Butene gas generation is slow at expected process vessel temperatures, but the rate is faster at higher temperatures. At 252{degrees}C the rate of butene gas generated was 0.33 g butene/min/g of tributyl phosphate present. The measured heat absorbed by the pyrolysis reaction was 228 J/g of tributyl phosphate initially present (or 14.5 kcal/mole of tributyl phosphate). Release of flammable butene gas into process areas where it could ignite appears to be the most serious safety consideration for the Plutonium Finishing Plant.

Barney, G.S.; Cooper, T.D.

1994-06-01T23:59:59.000Z

104

Energy-Saving Landscaping for Your Passive Solar Home Landscaping is often regarded as a finishing touch to enhance  

E-Print Network [OSTI]

Energy-Saving Landscaping for Your Passive Solar Home Landscaping is often regarded as a finishing at 30o north of east. When the sun reaches its maximum height, again at solar noon when it is directly Energy Office North Carolina Department of Administration Industrial Extension Service College

105

An Overview of Surface Finishes and Their Role in Printed Circuit Board Solderability and Solder Joint Performance  

SciTech Connect (OSTI)

A overview has been presented on the topic of alternative surface finishes for package I/Os and circuit board features. Aspects of processability and solder joint reliability were described for the following coatings: baseline hot-dipped, plated, and plated-and-fused 100Sn and Sn-Pb coatings; Ni/Au; Pd, Ni/Pd, and Ni/Pd/Au finishes; and the recently marketed immersion Ag coatings. The Ni/Au coatings appear to provide the all-around best option in terms of solderability protection and wire bondability. Nickel/Pal ftishes offer a slightly reduced level of performance in these areas that is most likely due to variable Pd surface conditions. It is necessmy to minimize dissolved Au or Pd contents in the solder material to prevent solder joint embrittlement. Ancillary aspects that included thickness measurement techniques; the importance of finish compatibility with conformal coatings and conductive adhesives; and the need for alternative finishes for the processing of non-Pb bearing solders were discussed.

Vianco, P.T.

1998-10-15T23:59:59.000Z

106

Thermal Stability Studies of Candidate Decontamination Agents for Hanford’s Plutonium Finishing Plant Plutonium-Contaminated Gloveboxes  

SciTech Connect (OSTI)

This report provides the results of PNNL's and Fluor's studies of the thermal stabilities of potential wastes arising from decontamination of Hanford's Plutonium Finishing Plant's plutonium contaminated gloveboxes. The candidate wastes arising from the decontamination technologies ceric nitrate/nitric acid, RadPro, Glygel, and Aspigel.

Scheele, Randall D.; Cooper, Thurman D.; Jones, Susan A.; Ewalt, John R.; Compton, James A.; Trent, Donald S.; Edwards, Matthew K.; Kozelisky, Anne E.; Scott, Paul A.; Minette, Michael J.

2005-09-29T23:59:59.000Z

107

Exterior Insulation Finish System (EIFS) Walls ORNL provides the tools to enable industry to engineer durable, moisture-tolerant  

E-Print Network [OSTI]

Exterior Insulation Finish System (EIFS) Walls ORNL provides the tools to enable industry the insulating value of walls and the energy efficiency of buildings. The EIFS concept came to America from in both moisture control and insulating value. EIFS's are inherently superior on thermal performance

Oak Ridge National Laboratory

108

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation InInformation InExplosionAnnouncements Media Contact HannaCenterEventsEvents Article Media

109

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4,3, 2008 [Events]5, 2010 [Events,

110

NREL: Buildings Research - Events  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the Contributions and Achievements of WomenEvents Below are upcoming events related to

111

Pottebaum et al. Event Definition for Intelligent Resource Management Event Definition for the Application of Event  

E-Print Network [OSTI]

of resource management (use case and demand side) and event processing (technology and supply side). MethodsPottebaum et al. Event Definition for Intelligent Resource Management Event Definition for the Application of Event Processing to Intelligent Resource Management Jens Pottebaum University of Paderborn, C

Paliouras, George

112

History and stabilization of the Plutonium Finishing Plant (PFP) complex, Hanford Site  

SciTech Connect (OSTI)

The 231-Z Isolation Building or Plutonium Metallurgy Building is located in the Hanford Site`s 200 West Area, approximately 300 yards north of the Plutonium Finishing Plant (PFP) (234-5 Building). When the Hanford Engineer Works (HEW) built it in 1944 to contain the final step for processing plutonium, it was called the Isolation Building. At that time, HEW used a bismuth phosphate radiochemical separations process to make `AT solution,` which was then dried and shipped to Los Alamos, New Mexico. (AT solution is a code name used during World War II for the final HEW product.) The process was carried out first in T Plant and the 224-T Bulk Reduction Building and B Plant and the 224-B Bulk Reduction Building. The 224-T and -B processes produced a concentrated plutonium nitrate stream, which then was sent in 8-gallon batches to the 231-Z Building for final purification. In the 231-Z Building, the plutonium nitrate solution underwent peroxide `strikes` (additions of hydrogen peroxide to further separate the plutonium from its carrier solutions), to form the AT solution. The AT solution was dried and shipped to the Los Alamos Site, where it was made into metallic plutonium and then into weapons hemispheres.` The 231-Z Building began `hot` operations (operations using radioactive materials) with regular runs of plutonium nitrate on January 16, 1945.

Gerber, M.S., Fluor Daniel Hanford

1997-02-18T23:59:59.000Z

113

A comparison of several surface finish measurement methods as applied to ground ceramic and metal surfaces  

SciTech Connect (OSTI)

Surface finish is one of the most common measures of surface quality of ground ceramics and metal parts and a wide variety of methods and parameters have been developed to measure it. The purpose of this investigation was to compare the surface roughness parameters obtained on the same two specimens from three different types of measuring instruments: a traditional mechanical stylus system, a non-contact laser scanning system, and the atomic force microscope (two different AFM systems were compared). The same surface-ground silicon nitride and Inconel 625 alloy specimens were used for all measurements in this investigation. Significant differences in arithmetic average roughness, root-mean-square roughness, and peak-to-valley roughness were obtained when comparing data from the various topography measuring instruments. Non-contact methods agreed better with the others on the metal specimen than on the ceramic specimen. Reasons for these differences include the effective dimensions and geometry of the probe with respect to the surface topography; the reflectivity of the surface, and the type of filtering scheme Results of this investigation emphasize the importance of rigorously specifying the manner of surface roughness measurement when either reporting roughness data or when requesting that roughness data be provided.

Blau, P.J.; Martin, R.L.; Riester, L.

1996-01-01T23:59:59.000Z

114

Thermal Performance of Exterior Insulation and Finish Systems Containing Vacuum Insulation Panels  

SciTech Connect (OSTI)

A high-performance wall system is under development to improve wall thermal performance to a level of U-factor of 0.19 W/(m2 K) (R-30 [h ft2 F]/Btu) in a standard wall thickness by incorporating vacuum insulation panels (VIPs) into an exterior insulation finish system (EIFS). Such a system would be applicable to new construction and will offer a solution to more challenging retrofit situations as well. Multiple design options were considered to balance the need to protect theVIPs during construction and building operation, while minimizing heat transfer through the wall system. The results reported here encompass an indepth assessment of potential system performances including thermal modeling, detailed laboratory measurements under controlled conditions on the component, and system levels according to ASTM C518 (ASTM 2010). The results demonstrate the importance of maximizing the VIP coverage over the wall face. The results also reveal the impact of both the design and execution of system details, such as the joints between adjacent VIPs. The test results include an explicit modeled evaluation of the system performance in a clear wall.

Childs, Kenneth W [ORNL; Stovall, Therese K [ORNL; Biswas, Kaushik [ORNL; Carbary, Lawrence D [Dow Corning Corporation, Midland, MI

2013-01-01T23:59:59.000Z

115

Comparison of Photoluminescence Imaging on Starting Multi-Crystalline Silicon Wafers to Finished Cell Performance: Preprint  

SciTech Connect (OSTI)

Photoluminescence (PL) imaging techniques can be applied to multicrystalline silicon wafers throughout the manufacturing process. Both band-to-band PL and defect-band emissions, which are longer-wavelength emissions from sub-bandgap transitions, are used to characterize wafer quality and defect content on starting multicrystalline silicon wafers and neighboring wafers processed at each step through completion of finished cells. Both PL imaging techniques spatially highlight defect regions that represent dislocations and defect clusters. The relative intensities of these imaged defect regions change with processing. Band-to-band PL on wafers in the later steps of processing shows good correlation to cell quality and performance. The defect band images show regions that change relative intensity through processing, and better correlation to cell efficiency and reverse-bias breakdown is more evident at the starting wafer stage as opposed to later process steps. We show that thermal processing in the 200 degrees - 400 degrees C range causes impurities to diffuse to different defect regions, changing their relative defect band emissions.

Johnston, S.; Yan, F.; Dorn, D.; Zaunbrecher, K.; Al-Jassim, M.; Sidelkheir, O.; Ounadjela, K.

2012-06-01T23:59:59.000Z

116

A Plutonium Finishing Plant Model for the Cercla Removal Action and Decommissioning Construction Final Report  

SciTech Connect (OSTI)

The joint policy between the U.S. Environmental Protection Agency (EPA) and the U.S. Department of Energy (DOE) for decommissioning buildings at DOE facilities documents an agreement between the agencies to perform decommissioning activities including demolition under the Comprehensive Environmental Response Compensation and Liability Act (CERCLA). The use of removal actions for decommissioning integrates EPA oversight authority, DOE lead agency responsibility, and state authority for decommissioning activities. Once removal actions have been performed under CERCLA, a construction completion report is required to document the completion of the required action. Additionally, a decommissioning report is required under DOE guidance. No direct guidance was found for documenting completion of decommissioning activities and preparing a final report that satisfies the CERCLA requirements and the DOE requirements for decommissioning. Additional guidance was needed for the documentation of construction completion under CERCLA for D and D projects undertaken under the joint policy that addresses the requirements of both agencies. A model for the construction completion report was developed to document construction completion for CERCLA D and D activities performed under the joint EPA/DOE policy at the Plutonium Finishing Plant (PFP). The model documentation report developed at PFP integrates the DOE requirements for establishing decommissioning end-points, documenting end-point completion and preparing a final decommissioning report with the CERCLA requirements to document completion of the action identified in the Action Memorandum (AM). The model includes the required information on health and safety, data management, cost and schedule and end-points completion. (authors)

Hopkins, A. [Fluor Hanford, Inc, Richland, WA (United States)

2008-07-01T23:59:59.000Z

117

Detection of solar events  

DOE Patents [OSTI]

A flux detection apparatus can include a radioactive sample having a decay rate capable of changing in response to interaction with a first particle or a field, and a detector associated with the radioactive sample. The detector is responsive to a second particle or radiation formed by decay of the radioactive sample. The rate of decay of the radioactive sample can be correlated to flux of the first particle or the field. Detection of the first particle or the field can provide an early warning for an impending solar event.

Fischbach, Ephraim; Jenkins, Jere

2013-08-27T23:59:59.000Z

118

Events | Department of Energy  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelinesProvedDecember 2005DepartmentDecember U.S. Department of EnergyEqualHeatersEvents

119

Sandia National Laboratories: Events  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive SolarEducation Programs:CRFProvideAids EnergyUFDSunShot OnEnergyEvents DOE OE

120

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4, 2011 [Events] ARM Joins User

Note: This page contains sample records for the topic "finish line event" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4, 2011 [Events] ARM Joins User19,

122

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4, 2011 [Events] ARM Joins

123

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4, 2011 [Events] ARM Joins16, 2011

124

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4, 2011 [Events] ARM Joins16,

125

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4, 2011 [Events] ARM Joins16,2012

126

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4, 2011 [Events] ARM

127

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4, 2011 [Events] ARM2011 Santa Fe

128

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4, 2011 [Events] ARM2011 Santa Fe,

129

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4, 2011 [Events] ARM2011 Santa

130

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4, 2011 [Events] ARM2011

131

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4, 2011 [Events] ARM2011January 5,

132

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4, 2011 [Events] ARM2011January

133

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4, 2011 [Events]

134

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4, 2011 [Events]9, 2009

135

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4, 2011 [Events]9, 20095, 2009

136

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4, 2011 [Events]9, 20095,

137

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4, 2011 [Events]9, 20095,October

138

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4, 2011 [Events]9,

139

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4, 2011 [Events]9,23, 2012

140

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4, 2011 [Events]9,23, 2012August

Note: This page contains sample records for the topic "finish line event" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4, 2011 [Events]9,23, 2012August07

142

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4, 2011 [Events]9,23,

143

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4, 2011 [Events]9,23,October 17,

144

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4, 2011 [Events]9,23,October 17,5,

145

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4, 2011 [Events]9,23,October

146

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4, 2011 [Events]9,23,October9,

147

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4, 20114, 2013 [Events] Abstracts

148

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4, 20114, 2013 [Events]

149

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4, 20114, 2013 [Events]April 8,

150

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4, 20114, 2013 [Events]April

151

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4, 20114, 2013 [Events]AprilApril

152

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4, 20114, 2013 [Events]AprilApril,

153

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4, 20114,January 29, 2014 [Events,

154

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4,3, 2008 [Events] Joint ARM Cloud

155

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4,3, 2008 [Events] Joint ARM

156

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4,3, 2008 [Events] Joint ARMMay

157

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4,3, 2008 [Events] Joint ARMMay20,

158

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4,3, 2008 [Events] Joint

159

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4,3, 2008 [Events] Joint8, 2008

160

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4,3, 2008 [Events] Joint8, 20089,

Note: This page contains sample records for the topic "finish line event" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4,3, 2008 [Events] Joint8,

162

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4,3, 2008 [Events] Joint8,10, 2006

163

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4,3, 2008 [Events] Joint8,10,

164

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4,3, 2008 [Events] Joint8,10,2,

165

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4,3, 2008 [Events] Joint8,10,2,10,

166

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4,3, 2008 [Events]

167

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4,3, 2008 [Events]5, 2010

168

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4,3, 2008 [Events]5, 2010September

169

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4,3, 2008 [Events]5,

170

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4,3, 2008 [Events]5,2, 2010

171

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4,3, 2008 [Events]5,2, 201028,

172

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4,3, 2008 [Events]5,2, 201028,ARM

173

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4,3, 2008 [Events]5,2,

174

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4,3, 2008 [Events]5,2,3rd

175

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4,3, 2008 [Events]5,2,3rd13th

176

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4,3, 2008 [Events]5,2,3rd13th30,

177

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4,3, 200828, 2010 [Events] IPY

178

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4,3, 200828, 2010 [Events] IPYJuly

179

ARM - Events Article  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience4AJ01)3, 2010 [DataDatastreamstoms3,4,3, 200828, 2010 [Events]

180

Climate VISION: Events  

Office of Scientific and Technical Information (OSTI)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinan antagonist Journal Article: Crystal structureComposite-- Energy, science, and technology - C L4.Events

Note: This page contains sample records for the topic "finish line event" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Event Calendar - Hanford Site  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest Region service area. TheEPSCI Home It isGasERP isTechnologiesCenterEvent

182

Events & Conferences | ORNL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest Region service area. TheEPSCI Home It isGasERP Submit an event or conference

183

Events - Energy Innovation Portal  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest Region service area. TheEPSCI Home It isGasERP Submit an event or

184

NREL: Education Center - Events  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the Contributions and Achievements of WomenEventsTools Update - April 2012Education

185

NREL: Photovoltaics Research - Events  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the Contributions and AchievementsResearchReliabilityand Evaluation EmergingEvents

186

Past Events and Tours  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar Home Design Passive Solar Home Design June 24, 2013 - 7:18pmPast Events

187

Events Calendar | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Events Calendar Events Calendar September 2014 < prev next > Sun Mon Tue Wed Thu Fri Sat 31 1 2 3 4 5 6 Geothermal Technologies Office Hosts Collegiate Competition 1:00PM to...

188

Events Calendar | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Events Calendar Events Calendar November 2014 < prev next > Sun Mon Tue Wed Thu Fri Sat 26 27 28 29 30 31 1 Compete in the Race to Zero Register by December 15th 3:15PM to...

189

Events Calendar | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Events Calendar Events Calendar October 2014 < prev next > Sun Mon Tue Wed Thu Fri Sat 28 29 30 1 2 3 4 Geothermal Technologies Office Hosts Collegiate Competition 1:00PM to...

190

DEACTIVATION AND DECOMMISSIONING ENVIRONMENTAL STRATEGY FOR THE PLUTONIUM FINISHING PLANT COMPLEX, HANFORD NUCLEAR RESERVATION  

SciTech Connect (OSTI)

Maintaining compliance with environmental regulatory requirements is a significant priority in successful completion of the Plutonium Finishing Plant (PFP) Nuclear Material Stabilization (NMS) Project. To ensure regulatory compliance throughout the deactivation and decommissioning of the PFP complex, an environmental regulatory strategy was developed. The overall goal of this strategy is to comply with all applicable environmental laws and regulations and/or compliance agreements during PFP stabilization, deactivation, and eventual dismantlement. Significant environmental drivers for the PFP Nuclear Material Stabilization Project include the Tri-Party Agreement; the Resource Conservation and Recovery Act of 1976 (RCRA); the Comprehensive Environmental Response, Compensation and Liability Act of 1980 (CERCLA); the National Environmental Policy Act of 1969 (NEPA); the National Historic Preservation Act (NHPA); the Clean Air Act (CAA), and the Clean Water Act (CWA). Recent TPA negotiation s with Ecology and EPA have resulted in milestones that support the use of CERCLA as the primary statutory framework for decommissioning PFP. Milestones have been negotiated to support the preparation of Engineering Evaluations/Cost Analyses for decommissioning major PFP buildings. Specifically, CERCLA EE/CA(s) are anticipated for the following scopes of work: Settling Tank 241-Z-361, the 232-Z Incinerator, , the process facilities (eg, 234-5Z, 242, 236) and the process facility support buildings. These CERCLA EE/CA(s) are for the purpose of analyzing the appropriateness of the slab-on-grade endpoint Additionally, agreement was reached on performing an evaluation of actions necessary to address below-grade structures or other structures remaining after completion of the decommissioning of PFP. Remaining CERCLA actions will be integrated with other Central Plateau activities at the Hanford site.

Hopkins, A.M.; Heineman, R.; Norton, S.; Miller, M.; Oates, L.

2003-02-27T23:59:59.000Z

191

Characterization of Mineralogical & Genetic Events  

SciTech Connect (OSTI)

OAK 270 - characterization of mineralogical and molecular genetic events assoc. w/colonization of mineral surfaces by geobacter

Dr.Timothy Magnuson

2001-11-30T23:59:59.000Z

192

Evaluation of glandless cottonseed meal plus lysine as a substitute for soybean meal in swine starter and growing-finishing diets  

E-Print Network [OSTI]

EVALUATION OF GLANDIZSS COTTONSEED MEAL PLUS LYSINE AS A SUBSTITUTE FOR SOYBEAN MEAL IN SWINE STARTER AND GROWING-FINISHING DIETS A Thesis by DAVID CHARLES LARUE Submitted to the Graduate College of Texas A&M University in partial fulfillment... of the requirement for the degree of MASTER OF SCIENCE December 1982 Major Subject: Nutrition EVALUATION OF GLANDLESS COTTONSEED MEAL PLUS LYSINE AS A SUBSTITUTE FOR SOYBEAN MEAL IN SWINE STARTER AND GROWING-FINISHING DIETS A Thesis by DAVID CHARLES LARUE...

LaRue, David Charles

1982-01-01T23:59:59.000Z

193

Start-to-end global imaging as a sunward propagating, SAPS-associated giant undulation event  

SciTech Connect (OSTI)

We present high-time resolution global imaging of a sunward propagating giant undulation event from start to finish. The event occurred on November 24, 2001 during a very disturbed storm interval. The giant undulations began to develop at around 13UT and persisted for approximately 2 hours. The sunward propagation speed was on the order of 0.6 km/s (relative to SM coordinate system). The undulations had a wavelength of {approx} 750 km, amplitudes of {approx} 890 km and produced ULF pulsations on the ground with a period of {approx} 1108s. We show that the undulations were associated with SAPs flows that were caused by the proton plasma sheet penetrating substantially farther Earthward than the electron plasma sheet on the duskside. The observations appear to be consistent with the development of a shear flow and/or ballooning type of instability at the plasmapause driven by intense SAPS-associated shear flows.

Henderson, Michael G [Los Alamos National Laboratory; Donovan, Eric F [U OF CALGARY; Foster, John C [MIT; Mann, Ian R [UNIV OF ALBERTA; Immel, Thomas J [UC/BERKELEY; Mende, Stephen B [UN/BERKELEY; Sigwarth, John B [NASA/GSFC

2009-01-01T23:59:59.000Z

194

Event counting alpha detector  

DOE Patents [OSTI]

An electrostatic detector is disclosed for atmospheric radon or other weak sources of alpha radiation. In one embodiment, nested enclosures are insulated from one another, open at the top, and have a high voltage pin inside and insulated from the inside enclosure. An electric field is produced between the pin and the inside enclosure. Air ions produced by collision with alpha particles inside the decay volume defined by the inside enclosure are attracted to the pin and the inner enclosure. With low alpha concentrations, individual alpha events can be measured to indicate the presence of radon or other alpha radiation. In another embodiment, an electrical field is produced between parallel plates which are insulated from a single decay cavity enclosure. 6 figs.

Bolton, R.D.; MacArthur, D.W.

1996-08-27T23:59:59.000Z

195

Event counting alpha detector  

DOE Patents [OSTI]

An electrostatic detector for atmospheric radon or other weak sources of alpha radiation. In one embodiment, nested enclosures are insulated from one another, open at the top, and have a high voltage pin inside and insulated from the inside enclosure. An electric field is produced between the pin and the inside enclosure. Air ions produced by collision with alpha particles inside the decay volume defined by the inside enclosure are attracted to the pin and the inner enclosure. With low alpha concentrations, individual alpha events can be measured to indicate the presence of radon or other alpha radiation. In another embodiment, an electrical field is produced between parallel plates which are insulated from a single decay cavity enclosure.

Bolton, Richard D. (Los Alamos, NM); MacArthur, Duncan W. (Los Alamos, NM)

1996-01-01T23:59:59.000Z

196

Review of Preparedness for Severe Natural Phenomena Events at...  

Energy Savers [EERE]

improvement in siting of command and response centers, emergency egress lighting, radio preventive maintenance, emergency communication equipment testing, and the Metal Finishing...

197

Superconducting transmission line particle detector  

DOE Patents [OSTI]

A microvertex particle detector for use in a high energy physic collider including a plurality of parallel superconducting thin film strips separated from a superconducting ground plane by an insulating layer to form a plurality of superconducting waveguides. The microvertex particle detector indicates passage of a charged subatomic particle by measuring a voltage pulse measured across a superconducting waveguide caused by the transition of the superconducting thin film strip from a superconducting to a non- superconducting state in response to the passage of a charged particle. A plurality of superconducting thin film strips in two orthogonal planes plus the slow electromagnetic wave propagating in a superconducting transmission line are used to resolve N/sup 2/ ambiguity of charged particle events. 6 figs.

Gray, K.E.

1988-07-28T23:59:59.000Z

198

Superconducting transmission line particle detector  

DOE Patents [OSTI]

A microvertex particle detector for use in a high energy physic collider including a plurality of parallel superconducting thin film strips separated from a superconducting ground plane by an insulating layer to form a plurality of superconducting waveguides. The microvertex particle detector indicates passage of a charged subatomic particle by measuring a voltage pulse measured across a superconducting waveguide caused by the transition of the superconducting thin film strip from a superconducting to a non-superconducting state in response to the passage of a charged particle. A plurality of superconducting thin film strips in two orthogonal planes plus the slow electromagnetic wave propogating in a superconducting transmission line are used to resolve N.sup.2 ambiguity of charged particle events.

Gray, Kenneth E. (Naperville, IL)

1989-01-01T23:59:59.000Z

199

A spectroscopic event of eta Car viewed from different directions: The data and first results  

E-Print Network [OSTI]

We present spectroscopic observations with high spectral resolution of eta Car as seen by the SE lobe of the Homunculus nebula over the 2003.5 "spectroscopic event". The observed spectra represent the stellar spectrum emitted near the pole of the star and are much less contaminated with nebular emission lines than direct observations of the central object. The "event" is qualitatively similar near the pole to what is observed in direct spectra of the star (more equator-on at 45 degree), but shows interesting differences. The observations show that the equivalent width changes of H alpha emission and other lines are less pronounced at the pole than in the line of sight. Also the absorption components appear less variable. A pronounced high-velocity absorption is present near the event in the He I lines indicating a mass-ejection event. This feature is also seen, but less pronounced, in the hydrogen lines. HeII4686 emission is observed for a brief period of time near the event and appears, if corrected for light travel time, to precede similar emission in the direct view. Our observations indicate that the event is probably not only a change in ionization and excitation structure or a simple eclipse-like event.

Otmar Stahl; Kerstin Weis; Dominik J. Bomans; Kris Davidson; Theodore R. Gull; Roberta M. Humphreys

2005-01-28T23:59:59.000Z

200

Solar Impulsive Energetic Electron Events  

E-Print Network [OSTI]

coronal mass ejections and solar energetic proton events, J.Voyager observations of solar wind proton temperature:1- 10Howard (2004), Variability of solar eruptions during cycle

Wang, Linghua

2009-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "finish line event" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Solar Impulsive Energetic Electron Events  

E-Print Network [OSTI]

gamma-ray events, and the Gamma Ray Burst Detector (KONUS)to study gamma-ray bursts. The NASA Deep Space Network is

Wang, Linghua

2009-01-01T23:59:59.000Z

202

Event by event fluctuations in heavy ion collisions  

SciTech Connect (OSTI)

The authors discuss the physics underlying event-by-event fluctuations in relativistic heavy ion collisions. We will argue that the fluctuations of the ratio of positively over negatively charged particles may serve as a unique signature for the Quark Gluon Plasma.

Koch, Volker

2001-01-01T23:59:59.000Z

203

PLUTONIUM FINISHING PLANT (PFP) 241-Z LIQUID WASTE TREATMENT FACILITY DEACTIVATION AND DEMOLITION  

SciTech Connect (OSTI)

Fluor Hanford, Inc. (FH) is proud to submit the Plutonium Finishing Plant (PFP) 241-Z liquid Waste Treatment Facility Deactivation and Demolition (D&D) Project for consideration by the Project Management Institute as Project of the Year for 2008. The decommissioning of the 241-Z Facility presented numerous challenges, many of which were unique with in the Department of Energy (DOE) Complex. The majority of the project budget and schedule was allocated for cleaning out five below-grade tank vaults. These highly contaminated, confined spaces also presented significant industrial safety hazards that presented some of the most hazardous work environments on the Hanford Site. The 241-Z D&D Project encompassed diverse tasks: cleaning out and stabilizing five below-grade tank vaults (also called cells), manually size-reducing and removing over three tons of process piping from the vaults, permanently isolating service utilities, removing a large contaminated chemical supply tank, stabilizing and removing plutonium-contaminated ventilation ducts, demolishing three structures to grade, and installing an environmental barrier on the demolition site . All of this work was performed safely, on schedule, and under budget. During the deactivation phase of the project between November 2005 and February 2007, workers entered the highly contaminated confined-space tank vaults 428 times. Each entry (or 'dive') involved an average of three workers, thus equaling approximately 1,300 individual confined -space entries. Over the course of the entire deactivation and demolition period, there were no recordable injuries and only one minor reportable skin contamination. The 241-Z D&D Project was decommissioned under the provisions of the 'Hanford Federal Facility Agreement and Consent Order' (the Tri-Party Agreement or TPA), the 'Resource Conservation and Recovery Act of 1976' (RCRA), and the 'Comprehensive Environmental Response, Compensation, and Liability Act of 1980' (CERCLA). The project completed TPA Milestone M-083-032 to 'Complete those activities required by the 241-Z Treatment and Storage Unit's RCRA Closure Plan' four years and seven months ahead of this legally enforceable milestone. In addition, the project completed TPA Milestone M-083-042 to 'Complete transition and dismantlement of the 241-2 Waste Treatment Facility' four years and four months ahead of schedule. The project used an innovative approach in developing the project-specific RCRA closure plan to assure clear integration between the 241-Z RCRA closure activities and ongoing and future CERCLA actions at PFP. This approach provided a regulatory mechanism within the RCRA closure plan to place segments of the closure that were not practical to address at this time into future actions under CERCLA. Lessons learned from th is approach can be applied to other closure projects within the DOE Complex to control scope creep and mitigate risk. A paper on this topic, entitled 'Integration of the 241-Z Building D and D Under CERCLA with RCRA Closure at the PFP', was presented at the 2007 Waste Management Conference in Tucson, Arizona. In addition, techniques developed by the 241-Z D&D Project to control airborne contamination, clean the interior of the waste tanks, don and doff protective equipment, size-reduce plutonium-contaminated process piping, and mitigate thermal stress for the workers can be applied to other cleanup activities. The project-management team developed a strategy utilizing early characterization, targeted cleanup, and close coordination with PFP Criticality Engineering to significantly streamline the waste- handling costs associated with the project . The project schedule was structured to support an early transition to a criticality 'incredible' status for the 241-Z Facility. The cleanup work was sequenced and coordinated with project-specific criticality analysis to allow the fissile material waste being generated to be managed in a bulk fashion, instead of individual waste packages. This approach negated the need for real-time assay of individ

JOHNSTON GA

2008-01-15T23:59:59.000Z

204

Series Transmission Line Transformer  

DOE Patents [OSTI]

A series transmission line transformer is set forth which includes two or more of impedance matched sets of at least two transmissions lines such as shielded cables, connected in parallel at one end ans series at the other in a cascading fashion. The cables are wound about a magnetic core. The series transmission line transformer (STLT) which can provide for higher impedance ratios and bandwidths, which is scalable, and which is of simpler design and construction.

Buckles, Robert A. (Livermore, CA); Booth, Rex (Livermore, CA); Yen, Boris T. (El Cerrito, CA)

2004-06-29T23:59:59.000Z

205

Compatibility of lead-free solders with lead containing surface finishes as a reliability issue in electronic assemblies  

SciTech Connect (OSTI)

Enhanced performance goals and environmental restrictions have heightened the consideration for use of alternative solders as replacements for the traditional tin-lead (Sn-Pb) eutectic and near-eutectic alloys. However, the implementation of non-Pb bearing surface finishes may lag behind solder alloy development. A study was performed which examined the effect(s) of Pb contamination on the performance of Sn-Ag-Bi and Sn-Ag-Cu-Sb lead-free solders by the controlled addition of 63Sn-37Pb solder at levels of 0.5 {minus} 8.0 wt.%. Thermal analysis and ring-in-plug shear strength studies were conducted on bulk solder properties. Circuit board prototype studies centered on the performance of 20I/O SOIC gull wing joints. Both alloys exhibited declines in their melting temperatures with greater Sn-Pb additions. The ring-in-plug shear strength of the Sn-Ag-Cu-Sb solder increased slightly with Sn-Pb levels while the Sn-Ag-Bi alloy experienced a strength loss. The mechanical behavior of the SOIC (Small Outline Integrated Circuit) Sn-Ag-Bi solder joints reproduced the strength levels were insensitive to 10,106 thermal cycles. The Sn-Ag-Cu-Sb solder showed a slight decrease in the gull wing joint strengths that was sensitive to the Pb content of the surface finish.

Vianco, P.; Rejent, J. [Sandia National Labs., Albuquerque, NM (United States); Artaki, I.; Ray, U.; Finley, D.; Jackson, A. [AT and T Bell Labs., Princeton, NJ (United States)

1996-03-01T23:59:59.000Z

206

Electric Transmission Lines (Nebraska)  

Broader source: Energy.gov [DOE]

The Public Service Commission has jurisdiction over all electricity transmission lines crossing over or under railroad tracks at public highway crossings. This section contains general regulations...

207

Special Events Facility Requests Policy  

E-Print Network [OSTI]

time permits. Large events and general public rentals require a minimum notice of four weeks. Special four (4) full working days before: No Refund #12;49 Food Permit Food permit must be completed ten days first right of refusal A Food Permit is not required with private events in which the general university

Amin, S. Massoud

208

Law School Event Composting Guide  

E-Print Network [OSTI]

is easy, and organic materials comprise a significant portion of event waste. Composting instead of trashing organic materials prevents pollution and enriches soils. For more information, visit http://www.epa.gov/wastes of the event setup. If necessary, move them for maximum accessibility near central trash/recycling stations

Wolfe, Patrick J.

209

Geodesic Lines, . . . Covariant . . .  

E-Print Network [OSTI]

Geodesic Lines, . . . Covariant . . . Home Page Title Page Page 781 of 818 Go Back Full Screen Close Quit 14.11. Geodesic Lines, Local Gauss-Bonnet Theorem Geodesics play a very important role in surface theory and in dynamics. One of the main reasons why geodesics are so important

Gallier, Jean

210

Transmission Line Security Monitor  

ScienceCinema (OSTI)

The Transmission Line Security Monitor is a multi-sensor monitor that mounts directly on high-voltage transmission lines to detect, characterize and communicate terrorist activity, human tampering and threatening conditions around support towers. For more information about INL's critical infrastructure protection research, visit http://www.facebook.com/idahonationallaboratory.

None

2013-05-28T23:59:59.000Z

211

Power System Extreme Event Detection: The VulnerabilityFrontier  

SciTech Connect (OSTI)

In this work we apply graph theoretic tools to provide aclose bound on a frontier relating the number of line outages in a gridto the power disrupted by the outages. This frontier describes theboundary of a space relating the possible severity of a disturbance interms of power disruption, from zero to some maximum on the boundary, tothe number line outages involved in the event. We present the usefulnessof this analysis with a complete analysis of a 30 bus system, and presentresults for larger systems.

Lesieutre, Bernard C.; Pinar, Ali; Roy, Sandip

2007-10-17T23:59:59.000Z

212

Events | Photosynthetic Antenna Research Center  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest Region service area. TheEPSCI Home It isGasERP Submit an eventEventsEvents

213

Intrinsic AGN Absorption Lines  

E-Print Network [OSTI]

Strong absorption lines are common in rest-frame UV spectra of AGNs due to a variety of resonant transitions, for example the HI Lyman series lines (most notably Ly-alpha 1216) and high-ionization doublets like CIV 1549,1551. The lines are called ``intrinsic'' if the absorbing gas is physically related to the AGN, e.g. if the absorber resides broadly within the radius of the AGN's surrounding ``host'' galaxy. Intrinsic absorption lines are thus valuable probes of the kinematics, physical conditions and elemental abundances in the gas near AGNs. Studies of intrinsic absorbers have historically emphasized the broad absorption lines (BALs) in quasars. Today we recognize a wider variety of intrinsic lines in a wider range of objects. For example, we now know that Seyfert 1 galaxies (the less luminous cousins of quasars) have intrinsic absorption. We also realize that intrinsic lines can form in a range of AGN environments --- from the dynamic inner regions like the BALs, to the more quiescent outer host galaxies >10 kpc away. This article provides a brief introduction to current observational and theoretical work on intrinsic AGN absorbers.

Fred Hamann

2000-06-12T23:59:59.000Z

214

Events Calendar | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: AlternativeEnvironment, Safety and Health AssessmentsEthanol Fuel Basics Ethanol FuelEventsEvents

215

Coherent soliton communication lines  

SciTech Connect (OSTI)

The data transmission in coherent fiber-optical communication lines using solitons with a variable phase is studied. It is shown that nonlinear coherent structures (solitons) can be applied for effective signal transmission over a long distance using amplitude and optical-phase keying of information. The optimum ratio of the pulse width to the bit slot at which the spectral efficiency (transmitted bits per second and hertz) is maximal is determined. It is shown that soliton fiber-optical communication lines can ensure data transmission at a higher spectral efficiency as compared to traditional communication lines and at a high signal-to-noise ratio.

Yushko, O. V., E-mail: olesya.yushko@gmail.com; Redyuk, A. A.; Fedoruk, M. P.; Turitsyn, S. K. [Novosibirsk State University (Russian Federation)

2014-11-15T23:59:59.000Z

216

THE CREATIVE APPLICATION OF SCIENCE TECHNOLOGY & WORK FORCE INNOVATIONS TO THE D&D OF PLUTONIUM FINISHING PLANT (PFP) AT THE HANFORD NUCLEAR RESERVATION  

SciTech Connect (OSTI)

The Plutonium Finishing Plant (PFP) consists of a number of process and support buildings for handling plutonium. Building construction began in the late 1940's to meet national priorities and became operational in 1950 producing refined plutonium salts and metal for the United States nuclear weapons program. The primary mission of the PFP was to provide plutonium used as special nuclear material for fabrication into a nuclear device for the war effort. Subsequent to the end of World War II, the PFP's mission expanded to support the Cold War effort through plutonium production during the nuclear arms race. PFP has now completed its mission and is fully engaged in deactivation, decontamination and decommissioning (D&D). At this time the PFP buildings are planned to be reduced to ground level (slab-on-grade) and the site remediated to satisfy national, Department of Energy (DOE) and Washington state requirements. The D&D of a highly contaminated plutonium processing facility presents a plethora of challenges. PFP personnel approached the D&D mission with a can-do attitude. They went into D&D knowing they were facing a lot of challenges and unknowns. There were concerns about the configuration control associated with drawings of these old process facilities. There were unknowns regarding the location of electrical lines and process piping containing chemical residues such as strong acids and caustics. The gloveboxes were highly contaminated with plutonium and chemical residues. Most of the glovebox windows were opaque with splashed process chemicals that coated the windows or etched them, reducing visibility to near zero. Visibility into the glovebox was a serious worker concern. Additionally, all the gloves in the gloveboxes were degraded and unusable. Replacing gloves in gloveboxes was necessary to even begin glovebox cleanout. The sheer volume of breathing air needed was also an issue. These and other challenges and PFP's approach to overcome these challengers are described. Many of the challenges to the D&D work at PFP were met with innovative approaches based on new science and/or technology and many were also based on the creativity and motivation of the work force personnel.

CHARBONEAU, S.L.

2006-02-01T23:59:59.000Z

217

The OGLE-II event sc5_2859 a Classical Nova outburst?  

E-Print Network [OSTI]

The OGLE-II event sc5_2859 was previously identified as the third longest microlensing event ever observed. Additional photometric observations from the EROS (Experience de Recherche d'Objets Sombres) survey and spectroscopic observations of the candidate star are used to test the microlensing hypothesis.The combined OGLE and EROS data provide a high quality coverage of the light curve. The colour of the sc5_2859 event is seen to change with time. A spectrum taken in 2003 exhibits a strong Halpha emission line. The additionnal data show that the OGLE-II sc5_2859 event is actually a classical nova outburst.

Afonso, C; Andersen, J; Ansari, R; Aubourg, E; Bareyre, P; Beaulieu, J P; Blanc, G; CSmith, M; Charlot, X; Coutures, C; De Kat, J; Ferlet, R; Fouqué, P; Glicenstein, J F; Goldman, B; Gould, A; Graff, D; Gros, M; Hamadache, C; Haďssinski, J; Le Guillou, Laurent; Lesquoy, E; Loup, C; Magneville, C; Marquette, J B; Maurice, E; Maury, A; Milsztajn, A; Moniez, M; Palanque-Delabrouille, Nathalie; Perdereau, O; Prévôt, L; Rahal, Y R; Rich, J; Spiro, M; Tisserand, P; Vidal-Madjar, A; Vigroux, L; Wagner, R M; Zylberajch, S

2006-01-01T23:59:59.000Z

218

Electric Transmission Lines (Iowa)  

Broader source: Energy.gov [DOE]

Electric transmission lines capable of operating at 69 kV or greater cannot be constructed along, across, or over any public highways or grounds outside of cities without a franchise from the...

219

Holes in Spectral Lines  

E-Print Network [OSTI]

The decay of an atom in the presence of a static perturbation is investigated. The perturbation couples a decaying state with a nondecaying state. A "hole" appears in the emission line at a frequency equal to the frequency ...

Fontana, Peter R.; Srivastava, Rajendra P.

1973-06-01T23:59:59.000Z

220

Power line detection system  

DOE Patents [OSTI]

A short-range, radio frequency (RF) transmitting-receiving system that provides both visual and audio warnings to the pilot of a helicopter or light aircraft of an up-coming power transmission line complex. Small, milliwatt-level narrowband transmitters, powered by the transmission line itself, are installed on top of selected transmission line support towers or within existing warning balls, and provide a continuous RF signal to approaching aircraft. The on-board receiver can be either a separate unit or a portion of the existing avionics, and can also share an existing antenna with another airborne system. Upon receipt of a warning signal, the receiver will trigger a visual and an audio alarm to alert the pilot to the potential power line hazard.

Latorre, Victor R. (Tracy, CA); Watwood, Donald B. (Tracy, CA)

1994-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "finish line event" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Power line detection system  

DOE Patents [OSTI]

A short-range, radio frequency (RF) transmitting-receiving system that provides both visual and audio warnings to the pilot of a helicopter or light aircraft of an up-coming power transmission line complex. Small, milliwatt-level narrowband transmitters, powered by the transmission line itself, are installed on top of selected transmission line support towers or within existing warning balls, and provide a continuous RF signal to approaching aircraft. The on-board receiver can be either a separate unit or a portion of the existing avionics, and can also share an existing antenna with another airborne system. Upon receipt of a warning signal, the receiver will trigger a visual and an audio alarm to alert the pilot to the potential power line hazard. 4 figs.

Latorre, V.R.; Watwood, D.B.

1994-09-27T23:59:59.000Z

222

Line Extension Alternatives  

Broader source: Energy.gov [DOE]

The Public Service Board (PSB) of Vermont developed rules regarding utility line extension requests. While the majority of the rules focus on the procedure followed (and associated fees) for the...

223

PanFunPro: Bacterial Pan-Genome Analysis Based on the Functional Profiles (Seventh Annual Sequencing, Finishing, Analysis in the Future (SFAF) Meeting 2012)  

ScienceCinema (OSTI)

Julien Tremblay from DOE JGI presents "Evaluation of Multiplexed 16S rRNA Microbial Population Surveys Using Illumina MiSeq Platorm" at the 7th Annual Sequencing, Finishing, Analysis in the Future (SFAF) Meeting held in June, 2012 in Santa Fe, NM.

Lukjancenko, Oksana [Technical University of Denmark

2013-01-25T23:59:59.000Z

224

Faculty of Law Number of students who has finished (with a degree) and early leavers (excluding transferred students) by AY (As of May 1, 2012)  

E-Print Network [OSTI]

Holdover H OthersI) Total + early admission Total GraduatesC) over-term within designated term Rate outside school Reasons to leaveF) Leaving RateG) Holdover H within designated term over-term GraduatesCFaculty of Law Number of students who has finished (with a degree) and early leavers (excluding

Banbara, Mutsunori

225

JOINT OUTREACH TASK GROUP (JOTG) Upcoming Events  

Broader source: Energy.gov [DOE]

JOTG Upcoming Events - January and February 2015 JOTG Upcoming Events - January and February 2015. The JOTG maintains and supports a calendar of events in DOE communities that may be of interest to former workers and their families.

226

Transmission line capital costs  

SciTech Connect (OSTI)

The displacement or deferral of conventional AC transmission line installation is a key benefit associated with several technologies being developed with the support of the U.S. Department of Energy`s Office of Energy Management (OEM). Previous benefits assessments conducted within OEM have been based on significantly different assumptions for the average cost per mile of AC transmission line. In response to this uncertainty, an investigation of transmission line capital cost data was initiated. The objective of this study was to develop a database for preparing preliminary estimates of transmission line costs. An extensive search of potential data sources identified databases maintained by the Bonneville Power Administration (BPA) and the Western Area Power Administration (WAPA) as superior sources of transmission line cost data. The BPA and WAPA data were adjusted to a common basis and combined together. The composite database covers voltage levels from 13.8 to 765 W, with cost estimates for a given voltage level varying depending on conductor size, tower material type, tower frame type, and number of circuits. Reported transmission line costs vary significantly, even for a given voltage level. This can usually be explained by variation in the design factors noted above and variation in environmental and land (right-of-way) costs, which are extremely site-specific. Cost estimates prepared from the composite database were compared to cost data collected by the Federal Energy Regulatory Commission (FERC) for investor-owned utilities from across the United States. The comparison was hampered because the only design specifications included with the FERC data were voltage level and line length. Working within this limitation, the FERC data were not found to differ significantly from the composite database. Therefore, the composite database was judged to be a reasonable proxy for estimating national average costs.

Hughes, K.R.; Brown, D.R.

1995-05-01T23:59:59.000Z

227

On-line tritium production monitor  

DOE Patents [OSTI]

A scintillation optical fiber system for the on-line monitoring of nuclear reactions in an event-by-event manner is described. In the measurement of tritium production one or more optical fibers are coated with enriched {sup 6}Li and connected to standard scintillation counter circuitry. A neutron generated {sup 6}Li(n)T reaction occurs in the coated surface of {sup 6}Li-coated fiber to produce energetic alpha and triton particles one of which enters the optical fiber and scintillates light through the fiber to the counting circuit. The coated optical fibers can be provided with position sensitivity by placing a mirror at the free end of the fibers or by using pulse counting circuits at both ends of the fibers. 5 figures.

Mihalczo, J.T.

1993-11-23T23:59:59.000Z

228

On-line tritium production monitor  

DOE Patents [OSTI]

A scintillation optical fiber system for the on-line monitoring of nuclear reactions in an event-by-event manner is described. In the measurement of tritium production one or more optical fibers are coated with enriched .sup.6 Li and connected to standard scintillation counter circuitry. A neutron generated .sup.6 Li(n )T reaction occurs in the coated surface of .sup.6 Li-coated fiber to produce energetic alpha and triton particles one of which enters the optical fiber and scintillates light through the fiber to the counting circuit. The coated optical fibers can be provided with position sensitivity by placing a mirror at the free end of the fibers or by using pulse counting circuits at both ends of the fibers.

Mihalczo, John T. (Oak Ridge, TN)

1993-01-01T23:59:59.000Z

229

Observation of O++++ 4 lines in proton aurora over Svalbard  

E-Print Network [OSTI]

Observation of O++++ 4 P-4 D0 lines in proton aurora over Svalbard N. Ivchenko,1,2 M. Galand,3 B. S March 2004; accepted 26 March 2004; published 29 May 2004. [1] Spectra of a proton aurora event show electron aurora. Conjugate satellite particle measurements are used as input to electron and proton

Lummerzheim, Dirk

230

Planet Parameters in Microlensing Events  

E-Print Network [OSTI]

A planetary microlensing event occurs when a planet perturbs one of the two images created in a point-mass microlensing event, causing a deviation from the standard Paczy\\'nski curve. Determination of the two physical parameters that can be extracted from a planetary microlensing event, the planet/star mass ratio q, and the planet/star separation in units of the stellar Einstein ring, $y_p$, is hampered by several types of degeneracies. There are two distinct and qualitatively different classes of planetary events: major and minor image perturbations. For major image perturbations, there is a potentially crippling continuous degeneracy in q which is of order $\\delta_d^{-1}$, where $\\delta_d$ is the maximum fractional deviation of the planetary perturbation. Since the threshold of detection is expected to be $\\delta_d \\sim 5%$, this degeneracy in q can be a factor of $\\sim 20$. For minor image perturbations, the continuous degeneracy in q is considerably less severe, and is typically less than a factor 4. We show that these degeneracies can be resolved by observations from dedicated telescopes on several continents together with optical/infrared photometry from one of these sites. There also exists a class of discrete degeneracies. These are typically easy to resolve given good temporal coverage of the planetary event. Unambiguous interpretation of planetary microlensing events requires the resolution of both types of degeneracy. We describe the degeneracies in detail and specify the situations in which they are problematic. We also describe how individual planet masses and physical projected separations can be measured.

B. Scott Gaudi; Andrew Gould

1996-10-16T23:59:59.000Z

231

Events Calendar | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels DataCombined Heat & PowerEnergy Blog EnergyMediaBlogAboutEqualEventsEvents

232

Events | Argonne Leadership Computing Facility  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest Region service area. TheEPSCI Home It isGasERP Submit an eventEvents May 1,

233

Events | Argonne Leadership Computing Facility  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest Region service area. TheEPSCI Home It isGasERP Submit an eventEvents May

234

Events  

Broader source: Energy.gov [DOE]

Below is an industry calendar with meetings, conferences, and webinars of interest to the wind energy technology communities.

235

Events  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

logo-heritage1 logo-halcyon1 Corporate Residents UCOR Oakridge Impact Services, Inc. Infrared Heating Technologies View More --> Contact Us 1020 Commerce Park Drive Suite L...

236

Events  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series toESnet4:Epitaxial Thin Film XRDEvan Felix efelix Primary12:25

237

Winter 2010 EVENTS FOCUS: RUSSIA  

E-Print Network [OSTI]

Winter 2010 EVENTS FOCUS: RUSSIA Tue, Jan 12, 4-5:30 pm WCED/CREES/Ford School Lecture. "U.S.-Russia Relations: Status of the `Reset'." John Beyrle, U.S. Ambassador to Russia. Co-sponsors: International Policy and literature, Oberlin College. Wed, Feb 3, 12-1:30 pm CREES Brown Bag. "Nostalgia in Post-Socialist Russia

Eustice, Ryan

238

Tore Bruland Building World Event  

E-Print Network [OSTI]

Tore Bruland Building World Event Representations From Linguistic Representations Thesis of Computer and Information Science c Tore Bruland ISBN 978-82-471-2 (printed version) ISBN 978-82-471-4292-9 (electronic version) ISSN 1503-8181 Doctoral thesis at NTNU, 2013:97 #12;For Kari Marie Bruland (1937

239

Host Event Based Network Monitoring  

SciTech Connect (OSTI)

The purpose of INL’s research on this project is to demonstrate the feasibility of a host event based network monitoring tool and the effects on host performance. Current host based network monitoring tools work on polling which can miss activity if it occurs between polls. Instead of polling, a tool could be developed that makes use of event APIs in the operating system to receive asynchronous notifications of network activity. Analysis and logging of these events will allow the tool to construct the complete real-time and historical network configuration of the host while the tool is running. This research focused on three major operating systems commonly used by SCADA systems: Linux, WindowsXP, and Windows7. Windows 7 offers two paths that have minimal impact on the system and should be seriously considered. First is the new Windows Event Logging API, and, second, Windows 7 offers the ALE API within WFP. Any future work should focus on these methods.

Jonathan Chugg

2013-01-01T23:59:59.000Z

240

Omega Transmission Lines  

E-Print Network [OSTI]

In this paper, we show how bi-anisotropic media with omega-type response can be realized using periodically loaded transmission lines. General conditions for the needed unit cell circuit block are derived. Also, an implementation is shown and analyzed.

Vehmas, Joni

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "finish line event" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Printed circuit dispersive transmission line  

DOE Patents [OSTI]

A printed circuit dispersive transmission line structure is disclosed comprising an insulator, a ground plane formed on one surface of the insulator, a first transmission line formed on a second surface of the insulator, and a second transmission line also formed on the second surface of the insulator and of longer length than the first transmission line and periodically intersecting the first transmission line. In a preferred embodiment, the transmission line structure exhibits highly dispersive characteristics by designing the length of one of the transmission line between two adjacent periodic intersections to be longer than the other. 5 figures.

Ikezi, H.; Lin-Liu, Y.R.; DeGrassie, J.S.

1991-08-27T23:59:59.000Z

242

Deep Sludge Gas Release Event Analytical Evaluation  

SciTech Connect (OSTI)

Long Abstract. Full Text. The purpose of the Deep Sludge Gas Release Event Analytical Evaluation (DSGRE-AE) is to evaluate the postulated hypothesis that a hydrogen GRE may occur in Hanford tanks containing waste sludges at levels greater than previously experienced. There is a need to understand gas retention and release hazards in sludge beds which are 200 -300 inches deep. These sludge beds are deeper than historical Hanford sludge waste beds, and are created when waste is retrieved from older single-shell tanks (SST) and transferred to newer double-shell tanks (DST).Retrieval of waste from SSTs reduces the risk to the environment from leakage or potential leakage of waste into the ground from these tanks. However, the possibility of an energetic event (flammable gas accident) in the retrieval receiver DST is worse than slow leakage. Lines of inquiry, therefore, are (1) can sludge waste be stored safely in deep beds; (2) can gas release events (GRE) be prevented by periodically degassing the sludge (e.g., mixer pump); or (3) does the retrieval strategy need to be altered to limit sludge bed height by retrieving into additional DSTs? The scope of this effort is to provide expert advice on whether or not to move forward with the generation of deep beds of sludge through retrieval of C-Farm tanks. Evaluation of possible mitigation methods (e.g., using mixer pumps to release gas, retrieving into an additional DST) are being evaluated by a second team and are not discussed in this report. While available data and engineering judgment indicate that increased gas retention (retained gas fraction) in DST sludge at depths resulting from the completion of SST 241-C Tank Farm retrievals is not expected and, even if gas releases were to occur, they would be small and local, a positive USQ was declared (Occurrence Report EM-RP--WRPS-TANKFARM-2012-0014, "Potential Exists for a Large Spontaneous Gas Release Event in Deep Settled Waste Sludge"). The purpose of this technical report is to (1) present and discuss current understandings of gas retention and release mechanisms for deep sludge in U.S. Department of Energy (DOE) complex waste storage tanks; and (2) to identify viable methods/criteria for demonstrating safety relative to deep sludge gas release events (DSGRE) in the near term to support the Hanford C-Farm retrieval mission. A secondary purpose is to identify viable methods/criteria for demonstrating safety relative to DSGREs in the longer term to support the mission to retrieve waste from the Hanford Tank Farms and deliver it to the Waste Treatment and Immobilization Plant (WTP). The potential DSGRE issue resulted in the declaration of a positive Unreviewed Safety Question (USQ). C-Farm retrievals are currently proceeding under a Justification for Continued Operation (JCO) that only allows tanks 241-AN-101 and 241-AN-106 sludge levels of 192 inches and 195 inches, respectively. C-Farm retrievals need deeper sludge levels (approximately 310 inches in 241-AN-101 and approximately 250 inches in 241-AN-106). This effort is to provide analytical data and justification to continue retrievals in a safe and efficient manner.

Sams, Terry L.

2013-08-15T23:59:59.000Z

243

Development of an alternating magnetic-field-assisted finishing process for microelectromechanical systems micropore x-ray optics  

SciTech Connect (OSTI)

X-ray astronomy research is often limited by the size, weight, complexity, and cost of functioning x-ray optics. Micropore optics promises an economical alternative to traditional (e.g., glass or foil) x-ray optics; however, many manufacturing difficulties prevent micropore optics from being a viable solution. Ezoe et al. introduced microelectromechanical systems (MEMS) micropore optics having curvilinear micropores in 2008. Made by either deep reactive ion etching or x-ray lithography, electroforming, and molding (LIGA), MEMS micropore optics suffer from high micropore sidewall roughness (10-30nmrms) which, by current standards, cannot be improved. In this research, a new alternating magnetic-field-assisted finishing process was developed using a mixture of ferrofluid and microscale abrasive slurry. A machine was built, and a set of working process parameters including alternating frequency, abrasive size, and polishing time was selected. A polishing experiment on a LIGA-fabricated MEMS micropore optic was performed, and a change in micropore sidewall roughness of 9.3{+-}2.5nmrms to 5.7{+-}0.7nmrms was measured. An improvement in x-ray reflectance was also seen. This research shows the feasibility and confirms the effects of this new polishing process on MEMS micropore optics.

Riveros, Raul E.; Yamaguchi, Hitomi; Mitsuishi, Ikuyuki; Takagi, Utako; Ezoe, Yuichiro; Kato, Fumiki; Sugiyama, Susumu; Yamasaki, Noriko; Mitsuda, Kazuhisa

2010-06-20T23:59:59.000Z

244

Satellite Parallaxes of Lensing Events Towards the Galactic Bulge  

E-Print Network [OSTI]

In order to understand the nature of the lenses that generate microlensing events, one would like to measure their mass, distance, and velocity. Unfortunately, current microlensing experiments measure only one parameter of the events, the characteristic timescale, which is a combination of the underlying physical parameters. Other methods are required to extract additional information. Parallax measurements using a satellite in an Earth-like orbit yield the projected velocity of the lens: ${\\bf{\\tilde v}} ={\\bf{v}}/(1-z)$, where ${\\bf{v}}$ is the transverse velocity (speed and direction) of the lens relative to the Earth-source line of sight, and $z$ is the ratio of the distances to the lens and the source. A measurement of ${\\bf{\\tilde v}}$ could distinguish between lenses belonging to the bulge and disk populations. We show that for photometric precisions of 1% to 2%, it is possible to measure the projected speed, $\\tilde v$, to an accuracy of $\\leq 10%$ for over 70% of disk lenses and over 60% of bulge lenses. For measuring the projected velocity ${\\bf{\\tilde v}}$, the percentages are 40% and {30%}, respectively. We find lines of sight $> 2^{\\circ}$ away from the ecliptic are preferable, and an Earth-satellite separation in the range $0.7 {\\rm{AU}} - 1.9{\\rm{AU}}$ is optimal. The requirements of the satellite for measuring the projected velocities of events towards the bulge are similar to those for measurements toward the LMC.

B. Scott Gaudi; Andrew Gould

1996-08-20T23:59:59.000Z

245

Power line harmonic radiation observed by satellite: Properties and propagation through the ionosphere  

E-Print Network [OSTI]

Power line harmonic radiation observed by satellite: Properties and propagation through of power line harmonic radiation events observed by the low-altitude DEMETER spacecraft. Altogether, 88 with the largest intensities often occur off exact multiples of base power system frequency. This can be explained

Santolik, Ondrej

246

Argonne's 2012 Earth Day Event  

SciTech Connect (OSTI)

Argonne's 2012 Earth Day event drew crowds from across the laboratory. Argonne and U.S. Department of Energy employees toured booths and interactive displays set up by Argonne programs and clubs. Several of Argonne's partners participated, including U.S. Department of Energy, University of Chicago, Abri Credit Union, DuPage County Forest Preserve, DuPage Water Commission, PACE and Morton Arboretum. Argonne scientists and engineers also participated in a poster session, discussing their clean energy research.

None

2012-01-01T23:59:59.000Z

247

Argonne's 2012 Earth Day Event  

ScienceCinema (OSTI)

Argonne's 2012 Earth Day event drew crowds from across the laboratory. Argonne and U.S. Department of Energy employees toured booths and interactive displays set up by Argonne programs and clubs. Several of Argonne's partners participated, including U.S. Department of Energy, University of Chicago, Abri Credit Union, DuPage County Forest Preserve, DuPage Water Commission, PACE and Morton Arboretum. Argonne scientists and engineers also participated in a poster session, discussing their clean energy research.

None

2013-04-19T23:59:59.000Z

248

Lessons Learned from Safety Events  

SciTech Connect (OSTI)

The Hydrogen Incident Reporting and Lessons Learned website (www.h2incidents.org) was launched in 2006 as a database-driven resource for sharing lessons learned from hydrogen-related safety events to raise safety awareness and encourage knowledge-sharing. The development of this database, its first uses and subsequent enhancements have been described at the Second and Third International Conferences on Hydrogen Safety. [1,2] Since 2009, continuing work has not only highlighted the value of safety lessons learned, but enhanced how the database provides access to another safety knowledge tool, Hydrogen Safety Best Practices (http://h2bestpractices.org). Collaborations with the International Energy Agency (IEA) Hydrogen Implementing Agreement (HIA) Task 19 – Hydrogen Safety and others have enabled the database to capture safety event learnings from around the world. This paper updates recent progress, highlights the new “Lessons Learned Corner” as one means for knowledge-sharing and examines the broader potential for collecting, analyzing and using safety event information.

Weiner, Steven C.; Fassbender, Linda L.

2012-11-01T23:59:59.000Z

249

Drill string transmission line  

DOE Patents [OSTI]

A transmission line assembly for transmitting information along a downhole tool comprising a pin end, a box end, and a central bore traveling between the pin end and the box end, is disclosed in one embodiment of the invention as including a protective conduit. A transmission line is routed through the protective conduit. The protective conduit is routed through the central bore and the ends of the protective conduit are routed through channels formed in the pin end and box end of the downhole tool. The protective conduit is elastically forced into a spiral or other non-linear path along the interior surface of the central bore by compressing the protective conduit to a length within the downhole tool shorter than the protective conduit.

Hall, David R. (Provo, UT); Hall, Jr., H. Tracy (Provo, UT); Pixton, David S. (Lehi, UT); Bradford, Kline (Orem, UT); Fox, Joe (Spanish Fork, UT)

2006-03-28T23:59:59.000Z

250

Evaluation of high- and low-protein sorghum grains supplemented with lysine and lysine plus threonine as a feed for finishing swine  

E-Print Network [OSTI]

/or methionine content are below the finishing pigs' requirements for these amino acids. Sorghum grain supplemented with these amino acids, either singularly or in combination, plus needed vitamins and minerals should theoretically provide optimum growth..., there was no significant difference in retained nitrogen. The nutritive value of two sorghum grains containing 7. 9 and 11. 8% protein was compared on the basis of rat growth and amino acid analyses by Waggle eX nf. (1966). The high protein sorghum grain had higher...

Kinslow, William Freddie

1972-01-01T23:59:59.000Z

251

The effects of various levels of coastal bermudagrass and alfalfa hays on feedlot performance, carcass composition and net energy for finishing steers  

E-Print Network [OSTI]

THE EFFECTS OF VARIOUS LEVELS OF COASTAL BERMUDAGRASS AND ALFALFA HAYS ON FEEDLOT PERFORMANCE, CARCASS COMPOSITION AND NET ENERGY FOR FINISHING STEERS A Thesis by WILLIAM EMMETT BROWN, JR. Submitted to the Graduate College of Texas A...&M University in partial fulfillment of the requirement for the degree of MASTER OF SCIENCE December 1978 Major Subject: Animal Science THE EFFECTS OF VARIOUS LEVELS OF COASTAL BERMUDAGRASS AND ALFALFA HAYS ON FEEDLOT PERFORMANCE, CARCASS COMPOSITION...

Brown, William Emmett

1978-01-01T23:59:59.000Z

252

Faculty of Law Number of students who has finished (with a degree) and early leavers (excluding transferred students) by AY (As of May 1, 2011)  

E-Print Network [OSTI]

Faculty of Law Number of students who has finished (with a degree) and early leavers (excluding or less more than 1 year Law 180 227 227 155 65 220 68% 29% 97% 5 2% 0 2 Total 180 227 227 155 65 220 68% 29% 97% 5 2% 0 2 Law 180 184 184 139 37 176 76% 20% 96% 6 3% 2 0 Total 180 184 184 139 37 176 76% 20

Banbara, Mutsunori

253

Meridional movement of wind anomalies during ENSO events and their role in event termination  

E-Print Network [OSTI]

Meridional movement of wind anomalies during ENSO events and their role in event termination Shayne), Meridional movement of wind anomalies during ENSO events and their role in event termination, Geophys. Res, setting up conditions favorable for the termination of ENSO warm events. The basic principles of the RDO

Santoso, Agus

254

Events Calendar | Department of Energy  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelinesProvedDecember 2005DepartmentDecember U.S. Department of EnergyEqualHeatersEvents Calendar

255

Energy Frontier Research Center Events  

Office of Science (SC) Website

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched5 Industrial CarbonArticles News(SC) CCIScattering | U.S.events/ The Office of

256

Sandia National Laboratories: Careers: Events  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive SolarEducation Programs:CRF Researchers answerCareers CybersecurityEvents

257

Events Calendar | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels DataCombined Heat & PowerEnergy Blog EnergyMediaBlogAboutEqualEvents

258

LANSCE | News & Media | Events  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest Region serviceMission Statement Titan TargetInJupiterUser LosLosLosEvents

259

NREL: Energy Systems Integration - Events  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the Contributions and Achievements ofLiz Torres PhotoMaterials ScienceEnergyEvents Learn

260

ATLAS Tracking Event Data Model  

E-Print Network [OSTI]

In this report the event data model (EDM) relevant for tracking in the ATLAS experiment is presented. The core component of the tracking EDM is a common track object which is suited to describe tracks in the innermost tracking sub-detectors and in the muon detectors in offline as well as online reconstruction. The design of the EDM was driven by a demand for modularity and extensibility while taking into account the different requirements of the clients. The structure of the track object and the representation of the tracking-relevant information are described in detail.

Ĺkesson, P F; Costa, M J; Elsing, M; Fleischmann, S; Gaponenko, A N; Liebig, W; Moyse, E; Salzburger, A; Siebel, M

2006-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "finish line event" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Developing Magnetorheological Finishing (MRF) Technology for the Manufacture of Large-Aperture Optics in Megajoule Class Laser Systems  

SciTech Connect (OSTI)

Over the last eight years we have been developing advanced MRF tools and techniques to manufacture meter-scale optics for use in Megajoule class laser systems. These systems call for optics having unique characteristics that can complicate their fabrication using conventional polishing methods. First, exposure to the high-power nanosecond and sub-nanosecond pulsed laser environment in the infrared (>27 J/cm{sup 2} at 1053 nm), visible (>18 J/cm{sup 2} at 527 nm), and ultraviolet (>10 J/cm{sup 2} at 351 nm) demands ultra-precise control of optical figure and finish to avoid intensity modulation and scatter that can result in damage to the optics chain or system hardware. Second, the optics must be super-polished and virtually free of surface and subsurface flaws that can limit optic lifetime through laser-induced damage initiation and growth at the flaw sites, particularly at 351 nm. Lastly, ultra-precise optics for beam conditioning are required to control laser beam quality. These optics contain customized surface topographical structures that cannot be made using traditional fabrication processes. In this review, we will present the development and implementation of large-aperture MRF tools and techniques specifically designed to meet the demanding optical performance challenges required in large-aperture high-power laser systems. In particular, we will discuss the advances made by using MRF technology to expose and remove surface and subsurface flaws in optics during final polishing to yield optics with improve laser damage resistance, the novel application of MRF deterministic polishing to imprint complex topographical information and wavefront correction patterns onto optical surfaces, and our efforts to advance the technology to manufacture large-aperture damage resistant optics.

Menapace, J A

2010-10-27T23:59:59.000Z

262

The Chemical Hazards Assessments Prior to D&D of the Plutonium Finishing Plant Hanford Nuclear Reservation  

SciTech Connect (OSTI)

All Hanford facilities, including the Plutonium Finishing Plant (PFP) were evaluated for chemical hazards in 1997, 1998 and 2000. The hazard evaluation, known as the PFP Facility Vulnerability Assessment (FVA), was prompted when chemicals in Tank A-109 in the Plutonium Reclamation Facility (PRF) exploded in May 1997. Actions were undertaken to eliminate or reduce what were thought to be the worst hazards following that evaluation. In 2001, a new PFP team was organized to review the progress to date in reducing hazards and to reassess hazards that might still remain within the facility. This reassessment continued into 2002 and is referred to as the 2002 PFP Residual Chemical Hazards Reassessment (RCHR). This report explains the results of the 2001/2002 reassessment of the chemical hazards at PFP. This reassessment effort forms the basis of the RCHR. The RCHR relied on previous assessments as the starting point for the 2001/2002 evaluation and used ranking criteria very similar to previous efforts. The RCHR team was composed of professionals representing Industrial Hygiene, Chemical Engineering, Mechanical Engineering, Hazardous Materials Handling Specialists, Solid Waste Management Specialists and Environmental Specialists. All areas of concern that could be accessed were physically examined and photographed where possible. Information from processing records, facility drawings and documents, design engineers, process engineers and work packages were compiled. The PFP vessel inventory was examined and expanded where required. New items listed in the vessel inventory were investigated. All items investigated were ranked using the hazard ranking criteria developed. This information was put on data sheets and compiled in a database.

FITCH, L.R.; HOPKINS, A.M.

2003-01-01T23:59:59.000Z

263

Utility Lines and Facilities (Montana)  

Broader source: Energy.gov [DOE]

These regulations apply to the construction of utility and power lines and facilities. They address the use of public right-of-ways for such construction, underground power lines, and construction...

264

An Equilibrium Model of Rare Event Premia  

E-Print Network [OSTI]

In this paper, we study the asset pricing implication of imprecise knowledge about rare events. Modeling rare events as jumps in the aggregate endowment, we explicitly solve the equilibrium asset prices in a pure-exchange ...

Liu, Jun

2002-08-12T23:59:59.000Z

265

ATLAS Inner Detector Event Data Model  

E-Print Network [OSTI]

offline/? cvsroot=atlas : InnerDetector/InDetRawEvent/ATLAS Inner Detector Event Data Model F. Akesson 1 , M.J.the Inner Detector of the ATLAS experiment is presented. Di?

Costa, M.J.; ATLAS

2009-01-01T23:59:59.000Z

266

EVENT CLOUDS : lighter than air architectural structures  

E-Print Network [OSTI]

EVENT CLOUD is a versatile covering system that allows events to happen independently to weather conditions. It consists of a lighter than air pneumatic structure, filled either with helium or hot air, that covers spaces ...

Peydro Duclos, Ignacio

2014-01-01T23:59:59.000Z

267

Low latency counter event indication  

DOE Patents [OSTI]

A hybrid counter array device for counting events with interrupt indication includes a first counter portion comprising N counter devices, each for counting signals representing event occurrences and providing a first count value representing lower order bits. An overflow bit device associated with each respective counter device is additionally set in response to an overflow condition. The hybrid counter array includes a second counter portion comprising a memory array device having N addressable memory locations in correspondence with the N counter devices, each addressable memory location for storing a second count value representing higher order bits. An operatively coupled control device monitors each associated overflow bit device and initiates incrementing a second count value stored at a corresponding memory location in response to a respective overflow bit being set. The incremented second count value is compared to an interrupt threshold value stored in a threshold register, and, when the second counter value is equal to the interrupt threshold value, a corresponding "interrupt arm" bit is set to enable a fast interrupt indication. On a subsequent roll-over of the lower bits of that counter, the interrupt will be fired.

Gara, Alan G. (Mount Kisco, NY); Salapura, Valentina (Chappaqua, NY)

2010-08-24T23:59:59.000Z

268

Coronal emission lines as thermometers  

E-Print Network [OSTI]

Coronal emission line intensities are commonly used to measure electron temperatures using emission measure and/or line ratio methods. In the presence of systematic errors in atomic excitation calculations and data noise, the information on underlying temperature distributions is fundamentally limited. Increasing the number of emission lines used does not necessarily improve the ability to discriminate between different kinds of temperature distributions.

Judge, Philip G

2009-01-01T23:59:59.000Z

269

TEMPORARY EVENT FOOD SERVICE VENDOR APPLICATION  

E-Print Network [OSTI]

TEMPORARY EVENT FOOD SERVICE VENDOR APPLICATION Name of Event Location Date(s) and Time(s) of Event, sandwiches, baked potatoes, hot dogs, brats, tacos, cut melon, milk,etc. #1. Prepackaged snack food vendors only need to complete Food Service Vendor Application. #2. - #4. Food vendors must 1) complete entire

Maxwell, Bruce D.

270

DISTRIBUTED EVENT LOCALIZATION AND TRACKING ALGORITHM (DELTA)  

E-Print Network [OSTI]

in a distributed event localization and tracking algorithm (DELTA). DELTA is extended with energy-efficient network management, event classification functionality and an energy based source localization. The energy;#12;Abstract Different approaches to do event detection, tracking, localization and classification have been

Braun, Torsten

271

Description Early Finish  

E-Print Network [OSTI]

.00 Level 2 Milestones 1070 Friction Stir-Weld Coil Leads TF Conductors 0 08DEC11 53 05JAN12 B 0 0.00 1150

Princeton Plasma Physics Laboratory

272

Assessment of the Plutonium Finishing Plant Criticality Alarm System U.S. Department of Energy Richland Operations Office  

SciTech Connect (OSTI)

At the request of the Assistant Manager for Safety and Engineering, the U.S. Department of Energy Richland Operations Office (RL) Engineering Support Division, performed an oversight review of the Plutonium Finishing Plant (PFP) nuclear Criticality Alarm System (CAS). The review was conducted to satisfy requirements and agreements associated with Defense Nuclear Facility Safety Board (DNFSB) Recommendation 2000-2, ''Vital Safety Systems.'' The PFP is managed by Fluor Hanford, Inc. for RL. The field assessment and staff interviews were conducted August 12 through August 19,2002. This was a limited scope assessment that consisted of a review of the nuclear CAS operations, maintenance, and compliance with National Consensus Standards Requirements. The main purpose of the assessment was to determine the adequacy of the existing alarm system and its associated infrastructure to support the PFP facility mission through the remaining facility lifetime. The Review Plan was modeled upon Criteria and Review Approach Documents (CRAD) developed for DNFSB Recommendation 2000-2 reviews conducted across the Hanford Site. Concerns regarding component degradation and failure, increasing numbers of occurrence reports associated with the alarm system, and reliability issues were addressed. Additionally, RL performed a review of the engineering aspects of the CAS including the functions of design authorities and aspects of systems engineering. However, the focus of the assessment was on operations, maintenance, and reliability of the CAS, associated procurement practices, adequacy of safety and engineering policies and procedures, safety documentation, and fundamental engineering practices including training, qualification, and systems engineering. This assessment revealed that the PFP CAS and its associated infrastructure, administrative procedures, and conduct of operations are generally effective. There are no imminent criticality safety issues associated with the operation of the existing CAS. The Assessment Team believes that the CAS, as it presently exists at the PFP facility, is adequate to support the remaining mission lifetime of the facility while continuing to ensure personnel safety. This conclusion is dependent upon a continued level of funding adequate to support the required maintenance and occasional system upgrade. Two findings were identified during this assessment. Additionally, the report identified eight observations and two recommendations. The assessment revealed that recent changes to OSR compliance procedures and other documents do not contain the signature of the CSR as required by procedure. Lack of appropriate approval signatures is a noncompliance with site-level procedures.

NIRIDER, L.T.

2002-10-01T23:59:59.000Z

273

Prediction Error and Event Boundaries 1 Running Head: PREDICTION ERROR AND EVENT BOUNDARIES  

E-Print Network [OSTI]

Prediction Error and Event Boundaries 1 Running Head: PREDICTION ERROR AND EVENT BOUNDARIES A computational model of event segmentation from perceptual prediction. Jeremy R. Reynolds, Jeffrey M. Zacks, and Todd S. Braver Washington University Manuscript #12;Prediction Error and Event Boundaries 2 People tend

Zacks, Jeffrey M.

274

Estimating physical quantities for an observed galactic microlensing event  

E-Print Network [OSTI]

For a given spatial distribution of the lenses and distribution of the transverse velocity of the lens relative to the line-of-sight, a probability distribution for the lens mass for a single observed event is derived. In addition, similar probability distributions are derived for the Einstein radius and the separation of the lens objects and their rotation period for a binary lens. These probability distributions are distinct from the distributions for the lens population, as investigated e.g. by the mass moment method of De Rujula, Jetzer, and Masso (1991). However, it is shown that the expectation value for the mass from the probability distribution coincides with the value from the mass moment method applied to a single observed event. The special cases of a Maxwellian velocity distribution and of a constant velocity are discussed in detail. For a rudimentary model of the Galactic halo, the probability distributions are shown and the relations between the expectation values of the physical quantities and the event timescale are given. For this model, it is shown that within a 95.4%-interval around the expectation value, the mass varies by a factor of 800.

M. Dominik

1997-11-13T23:59:59.000Z

275

Bipolar pulse forming line  

DOE Patents [OSTI]

A bipolar pulse forming transmission line module for linear induction accelerators having first, second, third, fourth, and fifth planar conductors which form an interleaved stack with dielectric layers between the conductors. Each conductor has a first end, and a second end adjacent an acceleration axis. The first and second planar conductors are connected to each other at the second ends, the fourth and fifth planar conductors are connected to each other at the second ends, and the first and fifth planar conductors are connected to each other at the first ends via a shorting plate adjacent the first ends. The third planar conductor is electrically connectable to a high voltage source, and an internal switch functions to short a high voltage from the first end of the third planar conductor to the first end of the fourth planar conductor to produce a bipolar pulse at the acceleration axis with a zero net time integral. Improved access to the switch is enabled by an aperture through the shorting plate and the proximity of the aperture to the switch.

Rhodes, Mark A. (Pleasanton, CA)

2008-10-21T23:59:59.000Z

276

Fast events in protein folding  

SciTech Connect (OSTI)

The primary objective of this work was to develop a molecular understanding of how proteins achieve their native three-dimensional (folded) structures. This requires the identification and characterization of intermediates in the protein folding process on all relevant timescales, from picoseconds to seconds. The short timescale events in protein folding have been entirely unknown. Prior to this work, state-of-the-art experimental approaches were limited to milliseconds or longer, when much of the folding process is already over. The gap between theory and experiment is enormous: current theoretical and computational methods cannot realistically model folding processes with lifetimes longer than one nanosecond. This unique approach to employ laser pump-probe techniques that combine novel methods of laser flash photolysis with time-resolved vibrational spectroscopic probes of protein transients. In this scheme, a short (picosecond to nanosecond) laser photolysis pulse was used to produce an instantaneous pH or temperature jump, thereby initiating a protein folding or unfolding reaction. Structure-specific, time-resolved vibrational probes were then used to identify and characterize protein folding intermediates.

Woodruff, W.; Callender, R.; Causgrove, T.; Dyer, R.; Williams, S.

1996-04-01T23:59:59.000Z

277

NETL LINES OF DEMARCATION 09282012  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

LINES OF DEMARCATION September 28, 2012 Contact: Site Operations Division or ESS&H Division with Questions The oversight, upkeep, and segregation of NETL infrastructure components,...

278

Events Beyond Design Safety Basis Analysis | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Events Beyond Design Safety Basis Analysis Events Beyond Design Safety Basis Analysis March 23, 2011 Safety Bulletin 2011-01, Events Beyond Design Safety Basis Analysis This Safety...

279

Event characterization in (very) asymmetric collisions  

E-Print Network [OSTI]

Event-by-event reconstruction of the collision geometry using some incarnation of the Glauber-model is a widely accepted method in studying heavy ion collisions. While there is no known problem with the procedure when applied to the collision of two large ions, we will argue that in very asymmetric collisions, like $p(d)$+A with at least one hard scattering process occuring the event geometry deduced with the simple Glauber-model may be biased.

G. David

2014-09-24T23:59:59.000Z

280

Joint Outreach Task Group (JOTG) Upcoming Events  

Broader source: Energy.gov [DOE]

The JOTG maintains and supports a calendar of events in DOE communities that may be of interest to former workers and their families.

Note: This page contains sample records for the topic "finish line event" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Energy Infrastructure Events and Expansions Infrastructure Security...  

Broader source: Energy.gov (indexed) [DOE]

Year-in-Review: 2010 Energy Infrastructure Events and Expansions Infrastructure Security and Energy Restoration Office of Electricity Delivery and Energy Reliability U.S....

282

APTAC 2014 Fall Conference Training Event  

Broader source: Energy.gov [DOE]

The Association of Procurement Technical Assistance Centers (APTAC) presents their semi-annual conference training event in Washington DC, from November 10-12, 2014.

283

THE DEACTIVATION DECONTAMINATION & DECOMMISSIONING OF THE PLUTONIUM FINISHING PLANT (PFP) A FORMER PLUTONIUM PROCESSING FACILITY AT DOE HANFORD SITE  

SciTech Connect (OSTI)

The Plutonium Finishing Plant (PFP) was constructed as part of the Manhattan Project during World War II. The Manhattan Project was developed to usher in the use of nuclear weapons to end the war. The primary mission of the PFP was to provide plutonium used as special nuclear material (SNM) for fabrication of nuclear devices for the war effort. Subsequent to the end of World War II, the PFP's mission expanded to support the Cold War effort through plutonium production during the nuclear arms race and later the processing of fuel grade mixed plutonium-uranium oxide to support DOE's breeder reactor program. In October 1990, at the close of the production mission for PFP, a shutdown order was prepared by the Department of Energy (DOE) in Washington, DC and issued to the Richland DOE field office. Subsequent to the shutdown order, a team from the Defense Nuclear Facilities Safety Board (DNFSB) analyzed the hazards at PFP associated with the continued storage of certain forms of plutonium solutions and solids. The assessment identified many discrete actions that were required to stabilize the different plutonium forms into stable form and repackage the material in high integrity containers. These actions were technically complicated and completed as part of the PFP nuclear material stabilization project between 1995 and early 2005. The completion of the stabilization project was a necessary first step in deactivating PFP. During stabilization, DOE entered into negotiations with the U.S. Environmental Protection Agency (EPA) and the State of Washington and established milestones for the Deactivation and Decommissioning (D&D) of the PFP. The DOE and its contractor, Fluor Hanford (Fluor), have made great progress in deactivating, decontaminating and decommissioning the PFP at the Hanford Site as detailed in this paper. Background information covering the PFP D&D effort includes descriptions of negotiations with the State of Washington concerning consent-order milestones, milestones completed to date, and the vision of bringing PFP to slab-on-grade. Innovative approaches in planning and regulatory strategies, as well new technologies from within the United States and from other countries and field decontamination techniques developed by workforce personnel, such as the ''turkey roaster'' and the ''lazy Susan'' are covered in detail in the paper. Critical information on issues and opportunities during the performance of the work such as concerns regarding the handling and storage of special nuclear material, concerns regarding criticality safety and the impact of SNM de-inventory at PFP are also provided. The continued success of the PFP D&D effort is due to the detailed, yet flexible, approach to planning that applied innovative techniques and tools, involved a team of experienced independent reviewers, and incorporated previous lessons learned at the Hanford site, Rocky Flats, and commercial nuclear D&D projects. Multi-disciplined worker involvement in the planning and the execution of the work has produced a committed workforce that has developed innovative techniques, resulting in safer and more efficient work evolutions.

CHARBONEAU, S.L.

2006-02-01T23:59:59.000Z

284

Measuring Hawking Radiation of a Kerr-Newman Black Hole in a Superconducting Transmission Line  

E-Print Network [OSTI]

Applying a dimensional reduction technique and a coordinates transformation approach, we deduce the Kerr-Newman space-time into a Painlev\\'{e}-like form, and obtain its corresponding event horizon and the Hawking radiation temperature. We find that, the event horizon of a Kerr-Newman black hole can be simulated in a superconducting transmission line. Moreover, by running some numerical simulation, we confirm that the Hawking radiation of a Kerr-Newman Black Hole can be experimentally measured in a superconducting transmission line.

X. G. Lan; D. Y. Chen; L. F. Wei

2014-03-21T23:59:59.000Z

285

Effect of HVDC line faults on transient torsional torques of turbine-generator shafts  

SciTech Connect (OSTI)

This paper investigates the effects of HVdc line faults, line de-energization, and line re-energization on the transient torsional stresses of steam turbine-generator (T-G) units. The studies are conducted on a bipole HVdc system which connects a T-G set to a large ac system. The shaft transient stresses of the T-G set as a result of HVac line fault, fault clearing, and automatic reclosure are also determined when the HVdc transmission system is replaced by an equivalent double-line HVac system. The EMTDC program is used for the simulation studies. The studies conclude that transient shaft stresses as a result of HVdc line fault and its subsequent switching events are (1) significantly less severe than those of HVac faults and subsequent switchings, and (2) not sensitive to the fault location and disturbance duration.

Shi, W. (Xi'an Jiaotong Univ. (China). Dept. of Electrical Engineering); Iravani, M.R. (Univ. of Toronto, Ontario (Canada). Dept. of Electrical Engineering)

1994-08-01T23:59:59.000Z

286

CATEGORIZATION OF EVENT SEQUENCES FOR LICENSE APPLICATION  

SciTech Connect (OSTI)

The purposes of this analysis are: (1) Categorize (as Category 1, Category 2, or Beyond Category 2) internal event sequences that may occur before permanent closure of the repository at Yucca Mountain. (2) Categorize external event sequences that may occur before permanent closure of the repository at Yucca Mountain. This includes examining DBGM-1 seismic classifications and upgrading to DBGM-2, if appropriate, to ensure Beyond Category 2 categorization. (3) State the design and operational requirements that are invoked to make the categorization assignments valid. (4) Indicate the amount of material put at risk by Category 1 and Category 2 event sequences. (5) Estimate frequencies of Category 1 event sequences at the maximum capacity and receipt rate of the repository. (6) Distinguish occurrences associated with normal operations from event sequences. It is beyond the scope of the analysis to propose design requirements that may be required to control radiological exposure associated with normal operations. (7) Provide a convenient compilation of the results of the analysis in tabular form. The results of this analysis are used as inputs to the consequence analyses in an iterative design process that is depicted in Figure 1. Categorization of event sequences for permanent retrieval of waste from the repository is beyond the scope of this analysis. Cleanup activities that take place after an event sequence and other responses to abnormal events are also beyond the scope of the analysis.

G.E. Ragan; P. Mecheret; D. Dexheimer

2005-04-14T23:59:59.000Z

287

Underlying event studies at ATLAS and CDF  

SciTech Connect (OSTI)

Improving our understanding and modeling of the underlying event in high energy collider environment is important for more precise measurements at the LHC. CDF Run II data for the underlying event associated with Drell-Yan lepton pair production and early ATLAS data measuring underlying event activity with respect to the leading transverse momentum track are presented. The data are compared with several QCD Monte Carlo models. It is seen that no current standard Monte Carlo tune adequately describes all the early ATLAS data and CDF data simultaneously. The underlying event observables presented here are particularly important for constraining the energy evolution of multiple parton interaction models. One of the goals of these analyses is to provide data that can be used to test and improve MC models for current and future physics studies at the LHC. The underlying event observables presented here are particularly important for constraining the energy evolution of multiple partonic interaction models, since the plateau heights of the underlying event profiles are highly correlated to multiple parton interaction activity. The data at 7 TeV are crucial for MC tuning, since measurements are needed with at least two energies to constrain the energy evolution of MPI activity. PYTHIA tune A and tune AW do a good job in describing the CDF data on the underlying-event observables for leading jet and Drell-Yan events, respectively, although the agreement between predictions and data is not perfect. The leading-jet data show slightly more activity in the underlying event than PYTHIA Tune A, although they are very similar - which may indicate the universality of underlying event modeling. However, all pre-LHC MC models predict less activity in the transverse region (i.e in the underlying event) than is actually observed in ATLAS leading track data, for both center-of-mass energies. There is therefore no current standard MC tune which adequately describes all the early ATLAS data. However, using diffraction-limited minimum bias distributions and the plateau of the underlying event distributions presented here, ATLAS has developed a new PYTHIA tune AMBT1 (ATLAS Minimum Bias Tune 1) and a new HERWIG+ JIMMY tune AUET1 (ATLAS Underlying Event Tune 1) which model the p{sub T} and charged multiplicity spectra significantly better than the pre-LHC tunes of those generators. It is critical to have sensible underlying event models containing our best physical knowledge and intuition, tuned to all relevant available data.

Kar, D.; /Dresden, Tech. U.

2011-01-01T23:59:59.000Z

288

Extreme events due to localisation of energy  

E-Print Network [OSTI]

We study a one-dimensional chain of harmonically coupled units in an asymmetric anharmonic soft potential. Due to nonlinear localisation of energy, this system exhibits extreme events in the sense that individual elements of the chain show very large excitations. A detailed statistical analysis of extremes in this system reveals some unexpected properties, e.g., a pronounced pattern in the inter event interval statistics. We relate these statistical properties to underlying system dynamics, and notice that often when extreme events occur the system dynamics adopts (at least locally) an oscillatory behaviour, resulting in, for example, a quick succession of such events. The model therefore might serve as a paradigmatic model for the study of the interplay of nonlinearity, energy transport, and extreme events.

Colm Mulhern; Stephan Bialonski; Holger Kantz

2015-01-09T23:59:59.000Z

289

Predictive Complex Event Processing: A conceptual framework for combining Complex Event Processing and  

E-Print Network [OSTI]

beszedes@inf.u- szeged.hu Hunor Demeter Nokia Siemens Network Hungary hunor.demeter@nsn.com Lóránt Farkas Nokia Siemens Network Hungary lorant.farkas@nsn.com ABSTRACT Complex Event Processing deals, transforming, cor- relating and aggregating them into complex events. Examples of complex events are: the 2009

Beszedes, Ărpád

290

Electrical transmission line diametrical retainer  

DOE Patents [OSTI]

The invention is a mechanism for retaining an electrical transmission line. In one embodiment of the invention it is a system for retaining an electrical transmission line within down hole components. In accordance with one aspect of the invention, the system includes a plurality of downhole components, such as sections of pipe in a drill string. The system also includes a coaxial cable running between the first and second end of a drill pipe, the coaxial cable having a conductive tube and a conductive core within it. The invention allows the electrical transmission line to with stand the tension and compression of drill pipe during routine drilling cycles.

Hall, David R. (Provo, UT); Hall, Jr., H. Tracy (Provo, UT); Pixton, David (Lehi, UT); Dahlgren, Scott (Provo, UT); Sneddon, Cameron (Provo, UT); Briscoe, Michael (Lehi, UT); Fox, Joe (Spanish Fork, UT)

2004-12-14T23:59:59.000Z

291

Pulse shaping with transmission lines  

DOE Patents [OSTI]

A method and apparatus for forming shaped voltage pulses uses passive reflection from a transmission line with nonuniform impedance. The impedance of the reflecting line varies with length in accordance with the desired pulse shape. A high voltage input pulse is transmitted to the reflecting line. A reflected pulse is produced having the desired shape and is transmitted by pulse removal means to a load. Light activated photoconductive switches made of silicon can be utilized. The pulse shaper can be used to drive a Pockels cell to produce shaped optical pulses.

Wilcox, Russell B. (Oakland, CA)

1987-01-01T23:59:59.000Z

292

Pulse shaping with transmission lines  

DOE Patents [OSTI]

A method and apparatus for forming shaped voltage pulses uses passive reflection from a transmission line with nonuniform impedance. The impedance of the reflecting line varies with length in accordance with the desired pulse shape. A high voltage input pulse is transmitted to the reflecting line. A reflected pulse is produced having the desired shape and is transmitted by pulse removal means to a load. Light activated photoconductive switches made of silicon can be utilized. The pulse shaper can be used to drive a Pockels cell to produce shaped optical pulses.

Wilcox, R.B.

1985-08-15T23:59:59.000Z

293

Authorization of Line Extension (Nebraska)  

Broader source: Energy.gov [DOE]

Any entity permitted to establish an electric light and power plant, and/or transmission or distribution lines within a city, village, or public electric light and power district, may also extend...

294

Transmission Lines Emulating Moving Media  

E-Print Network [OSTI]

In this paper, we show how the electromagnetic phenomena in moving magnetodielectric media can be emulated using artificial composite structures at rest. In particular, we introduce nonreciprocal periodically loaded transmission lines which support waves obeying the same rules as plane electromagnetic waves in moving media. Because the actual physical structure is at rest, in these transmission lines there are no fundamental limitations on the velocity values, which may take values larger than the speed of light or even complex values (considering complex amplitudes in the time-harmonic regime). An example circuit of a unit cell of a "moving" transmission line is presented and analyzed both numerically and experimentally. The special case of composite right/left handed host line is also studied numerically. Besides the fundamental interest, the study is relevant for potential applications in realizing engineered materials for various transformations of electromagnetic fields.

Vehmas, Joni; Tretyakov, Sergei

2014-01-01T23:59:59.000Z

295

Analysis of interconnect microstrip lines  

E-Print Network [OSTI]

of the return loss of the slot-coupled microstrip dipole. Section C presents two simulations of the return loss on the slot- coupled rectangular patch antenna. A. Interconnect of Microstrip Lines Several circuits with the geometry of Figure 1 were fabricated.... Experimental and Theoretical Results of the Interconnect Two circuits were designed and fabricated. Each circuit consists of two substrates as shown in Figure 9. One substrate has an open microstrip line etched in one side and an aperture etched...

Luong, Giam-Minh

1992-01-01T23:59:59.000Z

296

Fin-line horn antenna  

DOE Patents [OSTI]

A fin line circuit card containing a fin line slot feeds a dipole antenna ich extends a quarterwave outside the waveguide and provides an energy beam focal point at or near the open end of the waveguide. The dipole antenna thus maintains a wide and nearly constant beamwidth, low VSWR and a circular symmetric radiation pattern for use in electronic warfare direction finding and surveillance applications.

Reindel, John (San Diego, CA)

1990-01-01T23:59:59.000Z

297

Neutrino Event Rates from Gamma Ray Bursts  

E-Print Network [OSTI]

We recalculate the diffuse flux of high energy neutrinos produced by Gamma Ray Bursts (GRB) in the relativistic fireball model. Although we confirm that the average single burst produces only ~10^{-2} high energy neutrino events in a detector with 1 km^2 effective area, i.e. about 10 events per year, we show that the observed rate is dominated by burst-to-burst fluctuations which are very large. We find event rates that are expected to be larger by one order of magnitude, likely more, which are dominated by a few very bright bursts. This greatly simplifies their detection.

F. Halzen; D. W. Hooper

1999-10-08T23:59:59.000Z

298

Underlying Event Studies for LHC Energies  

E-Print Network [OSTI]

Underlying event was originally defined by the CDF collaboration decades ago. Here we improve the original definition to extend our analysis for events with multiple-jets. We introduce a definition for surrounding rings/belts and based on this definition the jet- and surrounding-belt-excluded areas will provide a good underlying event definition. We inverstigate our definition via the multiplicity in the defined geometry. In parallel, mean transverse momenta of these areas also studied in proton-proton collisions at $\\sqrt{s}=7$ TeV LHC energy.

Gergely Gábor Barnaföldi; András G. Agócs; Péter Lévai

2011-01-21T23:59:59.000Z

299

Route to extreme events in excitable systems  

E-Print Network [OSTI]

Systems of FitzHugh-Nagumo units with different coupling topologies are capable of self-generating and -terminating strong deviations from their regular dynamics that can be regarded as extreme events due to their rareness and recurrent occurrence. Here we demonstrate the crucial role of an interior crisis in the emergence of extreme events. In parameter space we identify this interior crisis as the organizing center of the dynamics by employing concepts of mixed-mode oscillations and of leaking chaotic systems. We find that extreme events occur in certain regions in parameter space, and we show the robustness of this phenomenon with respect to the system size.

Rajat Karnatak; Gerrit Ansmann; Ulrike Feudel; Klaus Lehnertz

2014-08-27T23:59:59.000Z

300

CONTAMINATED PROCESS EQUIPMENT REMOVAL FOR THE D&D OF THE 232-Z CONTAMINATED WASTE RECOVERY PROCESS FACILITY AT THE PLUTONIUM FINISHING PLANT (PFP)  

SciTech Connect (OSTI)

This paper describes the unique challenges encountered and subsequent resolutions to accomplish the deactivation and decontamination of a plutonium ash contaminated building. The 232-Z Contaminated Waste Recovery Process Facility at the Plutonium Finishing Plant was used to recover plutonium from process wastes such as rags, gloves, containers and other items by incinerating the items and dissolving the resulting ash. The incineration process resulted in a light-weight plutonium ash residue that was highly mobile in air. This light-weight ash coated the incinerator's process equipment, which included gloveboxes, blowers, filters, furnaces, ducts, and filter boxes. Significant airborne contamination (over 1 million derived air concentration hours [DAC]) was found in the scrubber cell of the facility. Over 1300 grams of plutonium held up in the process equipment and attached to the walls had to be removed, packaged and disposed. This ash had to be removed before demolition of the building could take place.

HOPKINS, A.M.; MINETTE, M.J.; KLOS, D.B.

2007-01-25T23:59:59.000Z

Note: This page contains sample records for the topic "finish line event" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Solar Neutron Events of October-November 2003  

E-Print Network [OSTI]

During the period when the Sun was intensely active on October-November 2003, two remarkable solar neutron events were observed by the ground-based neutron monitors. On October 28, 2003, in association with an X17.2 large flare, solar neutrons were detected with high statistical significance (6.4 sigma) by the neutron monitor at Tsumeb, Namibia. On November 4, 2003, in association with an X28 class flare, relativistic solar neutrons were observed by the neutron monitors at Haleakala in Hawaii and Mexico City, and by the solar neutron telescope at Mauna Kea in Hawaii simultaneously. Clear excesses were observed at the same time by these detectors, with the significance calculated as 7.5 sigma for Haleakala, and 5.2 sigma for Mexico City. The detector onboard the INTEGRAL satellite observed a high flux of hard X-rays and gamma-rays at the same time in these events. By using the time profiles of the gamma-ray lines, we can explain the time profile of the neutron monitor. It appears that neutrons were produced at the same time as the gamma-ray emission.

K. Watanabe; M. Gros; P. H. Stoker; K. Kudela; C. Lopate; J. F. Valdes-Galicia; A. Hurtado; O. Musalem; R. Ogasawara; Y. Mizumoto; M. Nakagiri; A. Miyashita; Y. Matsubara; T. Sako; Y. Muraki; T. Sakai; S. Shibata

2005-09-19T23:59:59.000Z

302

Brief updates Status of truth in pile-up events  

E-Print Network [OSTI]

Brief updates Status of truth in pile-up events November 18, 2008 Anton Kapliy #12;Contents of McEventCollection Raw truth container of events ­ Physics Event : GenParticles ­ In-time pile-up event 1 : GenParticles ­ In-time pile-up event 2 : GenParticles ­ BC +/-1 pile-up event 1 : GenParticles ­ .... far out

303

Orientation Week Events School of Computer Science  

E-Print Network [OSTI]

Orientation Week Events School of Computer Science September 9th ­ September 12th Monday 9th:00­10:30 Jack Cole 0.35 MSc Curriculum Overview 3 14:00­16:00 Jack Cole 1.33a Computer Science Junior Honours Location Event 1 9:30­10:30 Jack Cole 0.35 Welcome to First Year Computer Science Students 1 10

St Andrews, University of

304

Solar Decathlon 2005: The Event in Review  

SciTech Connect (OSTI)

Solar Decathlon 2005: The Event in Review is a technical report describing the 2005 Solar Decathlon, an event sponsored by the U.S. Department of Energy wherein 18 collegiate teams competed in 10 contests to design, build, and operate an attractive, efficient, entirely solar-powered home. The report gives an overview of the competition, including final results, team strategies, and detailed descriptions the 18 homes.

Moon, S.; Nahan, R.; Warner, C.; Wassmer, M.

2006-06-01T23:59:59.000Z

305

University of Delaware | CCEI Past Events  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered energy consumption by sectorlong version)UndergroundPast Events DATE EVENT

306

PRELIMINARY SELECTION OF MGR DESIGN BASIS EVENTS  

SciTech Connect (OSTI)

The purpose of this analysis is to identify the preliminary design basis events (DBEs) for consideration in the design of the Monitored Geologic Repository (MGR). For external events and natural phenomena (e.g., earthquake), the objective is to identify those initiating events that the MGR will be designed to withstand. Design criteria will ensure that radiological release scenarios resulting from these initiating events are beyond design basis (i.e., have a scenario frequency less than once per million years). For internal (i.e., human-induced and random equipment failures) events, the objective is to identify credible event sequences that result in bounding radiological releases. These sequences will be used to establish the design basis criteria for MGR structures, systems, and components (SSCs) design basis criteria in order to prevent or mitigate radiological releases. The safety strategy presented in this analysis for preventing or mitigating DBEs is based on the preclosure safety strategy outlined in ''Strategy to Mitigate Preclosure Offsite Exposure'' (CRWMS M&O 1998f). DBE analysis is necessary to provide feedback and requirements to the design process, and also to demonstrate compliance with proposed 10 CFR 63 (Dyer 1999b) requirements. DBE analysis is also required to identify and classify the SSCs that are important to safety (ITS).

J.A. Kappes

1999-09-16T23:59:59.000Z

307

Florida Electric Transmission Line Siting Act (Florida)  

Broader source: Energy.gov [DOE]

The Transmission Line Siting Act (TLSA) is the state’s centralized process for licensing electrical transmission lines which; (a) are 230 kV or larger; (b) cross a county line; and, (c) are 15...

308

Wireless Sensor Network for Electric Transmission Line Monitoring  

SciTech Connect (OSTI)

Generally, federal agencies tasked to oversee power grid reliability are dependent on data from grid infrastructure owners and operators in order to obtain a basic level of situational awareness. Since there are many owners and operators involved in the day-to-day functioning of the power grid, the task of accessing, aggregating and analyzing grid information from these sources is not a trivial one. Seemingly basic tasks such as synchronizing data timestamps between many different data providers and sources can be difficult as evidenced during the post-event analysis of the August 2003 blackout. In this project we investigate the efficacy and cost effectiveness of deploying a network of wireless power line monitoring devices as a method of independently monitoring key parts of the power grid as a complement to the data which is currently available to federal agencies from grid system operators. Such a network is modeled on proprietary power line monitoring technologies and networks invented, developed and deployed by Genscape, a Louisville, Kentucky based real-time energy information provider. Genscape measures transmission line power flow using measurements of electromagnetic fields under overhead high voltage transmission power lines in the United States and Europe. Opportunities for optimization of the commercial power line monitoring technology were investigated in this project to enable lower power consumption, lower cost and improvements to measurement methodologies. These optimizations were performed in order to better enable the use of wireless transmission line monitors in large network deployments (perhaps covering several thousand power lines) for federal situational awareness needs. Power consumption and cost reduction were addressed by developing a power line monitor using a low power, low cost wireless telemetry platform known as the ''Mote''. Motes were first developed as smart sensor nodes in wireless mesh networking applications. On such a platform, it has been demonstrated in this project that wireless monitoring units can effectively deliver real-time transmission line power flow information for less than $500 per monitor. The data delivered by such a monitor has during the course of the project been integrated with a national grid situational awareness visualization platform developed by Oak Ridge National Laboratory. Novel vibration energy scavenging methods based on piezoelectric cantilevers were also developed as a proposed method to power such monitors, with a goal of further cost reduction and large-scale deployment. Scavenging methods developed during the project resulted in 50% greater power output than conventional cantilever-based vibrational energy scavenging devices typically used to power smart sensor nodes. Lastly, enhanced and new methods for electromagnetic field sensing using multi-axis magnetometers and infrared reflectometry were investigated for potential monitoring applications in situations with a high density of power lines or high levels of background 60 Hz noise in order to isolate power lines of interest from other power lines in close proximity. The goal of this project was to investigate and demonstrate the feasibility of using small form factor, highly optimized, low cost, low power, non-contact, wireless electric transmission line monitors for delivery of real-time, independent power line monitoring for the US power grid. The project was divided into three main types of activity as follows; (1) Research into expanding the range of applications for non-contact power line monitoring to enable large scale low cost sensor network deployments (Tasks 1, 2); (2) Optimization of individual sensor hardware components to reduce size, cost and power consumption and testing in a pilot field study (Tasks 3,5); and (3) Demonstration of the feasibility of using the data from the network of power line monitors via a range of custom developed alerting and data visualization applications to deliver real-time information to federal agencies and others tasked with grid reliability (Tasks 6,8)

Alphenaar, Bruce

2009-06-30T23:59:59.000Z

309

Fosmid Cre-LoxP Inverse PCR Paired-End (Fosmid CLIP-PE), a Novel Method for Constructing Fosmid Pair-End Library (Seventh Annual Sequencing, Finishing, Analysis in the Future (SFAF) Meeting 2012)  

SciTech Connect (OSTI)

Ze Peng from DOE JGI presents "Fosmid Cre-LoxP Inverse PCR Paired-End (Fosmid CLIP-PE), a Novel Method for Constructing Fosmid Pair-End Library" at the 7th Annual Sequencing, Finishing, Analysis in the Future (SFAF) Meeting held in June, 2012 in Santa Fe, NM.

Peng, Ze [DOE JGI] [DOE JGI

2012-06-01T23:59:59.000Z

310

Fosmid Cre-LoxP Inverse PCR Paired-End (Fosmid CLIP-PE), a Novel Method for Constructing Fosmid Pair-End Library (Seventh Annual Sequencing, Finishing, Analysis in the Future (SFAF) Meeting 2012)  

ScienceCinema (OSTI)

Ze Peng from DOE JGI presents "Fosmid Cre-LoxP Inverse PCR Paired-End (Fosmid CLIP-PE), a Novel Method for Constructing Fosmid Pair-End Library" at the 7th Annual Sequencing, Finishing, Analysis in the Future (SFAF) Meeting held in June, 2012 in Santa Fe, NM.

Peng, Ze [DOE JGI

2013-01-25T23:59:59.000Z

311

A TRANSITION REGION EXPLOSIVE EVENT OBSERVED IN He II WITH THE MOSES SOUNDING ROCKET  

SciTech Connect (OSTI)

Transition region explosive events (EEs) have been observed with slit spectrographs since at least 1975, most commonly in lines of C IV (1548 A, 1550 A) and Si IV (1393 A, 1402 A). We report what we believe to be the first observation of a transition region EE in He II 304 A. With the Multi-Order Solar EUV Spectrograph (MOSES) sounding rocket, a novel slitless imaging spectrograph, we are able to see the spatial structure of the event. We observe a bright core expelling two jets that are distinctly non-collinear, in directions that are not anti-parallel. The jets have sky-plane velocities of order 75 km s{sup -1} and line-of-sight velocities of +75 km s{sup -1} (blue) and -30 km s{sup -1} (red). The core is a region of high non-thermal Doppler broadening, characteristic of EEs, with maximal broadening 380 km s{sup -1} FWHM. It is possible to resolve the core broadening into red and blue line-of-sight components of maximum Doppler velocities +160 km s{sup -1} and -220 km s{sup -1}. The event lasts more than 150 s. Its properties correspond to the larger, long-lived, and more energetic EEs observed in other wavelengths.

Fox, J. Lewis; Kankelborg, Charles C. [Montana State University EPS 264, Bozeman, MT 59717 (United States); Thomas, Roger J., E-mail: fox@physics.montana.ed, E-mail: kankel@solar.physics.montana.ed, E-mail: Roger.J.Thomas@nasa.go [Goddard Space Flight Center NASA/GSFC Code 671, Greenbelt, MD 20771 (United States)

2010-08-20T23:59:59.000Z

312

Scaling laws governing the roughness of the swash edge line  

E-Print Network [OSTI]

The physics of swash i.e. a layer of water that washes up on the beach after an incoming wave has broken is complicated and intriguing. It includes perplexed hydrodynamic and sediment transport events. In our paper we address to the roughness of the moving swash boundary at which a beach, water and air meet. We treat the behavior of this boundary as an interfacial phenomenon, without going into details of formation of edge waves and beach cusps, covered broadly in literature. This "crude" approach turns out to be productive and revealing the resemblance of the swash line with a broad diversity of effects arising from the random pinning of moving boundaries.

Ed. Bormashenko; A. Musin; R. Grynuov

2014-02-23T23:59:59.000Z

313

What can emission lines tell us?  

E-Print Network [OSTI]

1 Generalities 2 Empirical diagnostics based on emission lines 3 Photoionization modelling 4 Pending questions 5 Appendix: Lists of useful lines and how to deal with them

G. Stasinska

2007-04-03T23:59:59.000Z

314

Objective determination of optimal power line designs.  

E-Print Network [OSTI]

??Includes abstract. The thesis investigated the possibility of overhead power line designs being decided by using an objective rather thana subjective method. Power lines are… (more)

Stephen, Robert G.

2010-01-01T23:59:59.000Z

315

Rates for Color Shifted Microlensing Events  

E-Print Network [OSTI]

If the objects responsible for gravitational microlensing (ML) of Galactic-bulge stars are faint dwarfs, then blended light from the lens will distort the shape of the ML light curve and shift the color of the observed star during the event. The resolution in current surveys is not accurate enough to observe this effect, but it should be detected with frequent and precise followup observations. We calculate the expected rates for ML events where the shape distortions will be observable by such followup observations, assuming that the lenses are ordinary main-sequence stars in a bar and in the disk. We study the dependence of the rates for color-shifted (CS) events on the frequency of followup observations and on the precision of the photometry for a variety of waveband pairings. We find that for hourly observations in $B$ and $K$ with typical photometric errors of 0.01 mag, 28\\% of the events where a main-sequence bulge star is lensed, and 7\\% of the events where the source is a bulge giant, will give rise to a measurable CS at the 95\\% confidence level. For observations in $V$ and $I$, the fractions become 18\\% and 5\\%, respectively, but may be increased to 40\\% and 13\\% by improved photometric accuracy and increased sampling frequency. We outline how the mass, distance, and transverse speed of the lens can be obtained, giving examples of typical errors. We discuss how CS events can be distinguished from events where the source is blended with a binary companion.

Ari Buchalter; Marc Kamionkowski; R. Michael Rich

1995-11-08T23:59:59.000Z

316

Quasistellar Objects: Intervening Absorption Lines  

E-Print Network [OSTI]

We briefly review, at a level appropriate for graduate students and non-specialists, the field of quasar absorption lines (QALs). Emphasis is on the intervening absorbers. We present the anatomy of a quasar spectrum due to various classes of intervening absorption systems, and a brief historical review of each absorber class (Lyman-alpha forest and Lyman limit systems, and metal-line and damped Lyman-alpha absorbers). We also provide several heuristic examples on how the physical properties of both the intergalactic medium and the gaseous environments associated with earlier epoch galaxies can be inferred from QALs. The evolution of these environments from z=4 are discussed.

Jane C. Charlton; Christopher W. Churchill

2000-05-31T23:59:59.000Z

317

Overview of event-by-event analysis of high energy nuclear collisions  

E-Print Network [OSTI]

The event-by-event analysis of high energy nuclear collisions aims at revealing the richness of the underlying event structures and provide unique measures of dynamical fluctuations associated with QGP phase transition. The major challenge in these studies is to separate the dynamical fluctuations from the many other sources which contribute to the measured values. We present the fluctuations in terms of event multiplicity, mean transverse momentum, elliptic flow, source sizes, particle ratios and net charge distributions. In addition, we discuss the effect of long range correlations, disoriented chiral condensates and presence of jets. A brief review of various probes used for fluctuation studies and available experimental results are presented.

Tapan K. Nayak

2007-06-19T23:59:59.000Z

318

A Discrete Event Simulation Model For Unstructured Supervisory Control  

E-Print Network [OSTI]

A Discrete Event Simulation Model For Unstructured Supervisory Control Of Unmanned Vehicles Committee #12;2 A Discrete Event Simulation Model For Unstructured Supervisory Control Of Unmanned multipleoperator multiplevehicle discrete event simulation model (MOMUVDES) is developed which captures

Cummings, Mary "Missy"

319

Coiled transmission line pulse generators  

DOE Patents [OSTI]

Methods and apparatus are provided for fabricating and constructing solid dielectric "Coiled Transmission Line" pulse generators in radial or axial coiled geometries. The pour and cure fabrication process enables a wide variety of geometries and form factors. The volume between the conductors is filled with liquid blends of monomers, polymers, oligomers, and/or cross-linkers and dielectric powders; and then cured to form high field strength and high dielectric constant solid dielectric transmission lines that intrinsically produce ideal rectangular high voltage pulses when charged and switched into matched impedance loads. Voltage levels may be increased by Marx and/or Blumlein principles incorporating spark gap or, preferentially, solid state switches (such as optically triggered thyristors) which produce reliable, high repetition rate operation. Moreover, these Marxed pulse generators can be DC charged and do not require additional pulse forming circuitry, pulse forming lines, transformers, or an a high voltage spark gap output switch. The apparatus accommodates a wide range of voltages, impedances, pulse durations, pulse repetition rates, and duty cycles. The resulting mobile or flight platform friendly cylindrical geometric configuration is much more compact, light-weight, and robust than conventional linear geometries, or pulse generators constructed from conventional components. Installing additional circuitry may accommodate optional pulse shape improvements. The Coiled Transmission Lines can also be connected in parallel to decrease the impedance, or in series to increase the pulse length.

McDonald, Kenneth Fox (Columbia, MO)

2010-11-09T23:59:59.000Z

320

Multi-threaded Event Reconstruction with JANA  

SciTech Connect (OSTI)

The C++ reconstruction framework JANA has been written to support the next generation of Nuclear Physics experiments at Jefferson Lab in anticipation of the 12GeV upgrade. The JANA framework was designed to allow multi-threaded event processing with a minimal impact on developers of reconstruction software. As we enter the multi-core (and soon many-core) era, thread-enabled code will become essential to utilizing the full processor power available without invoking the logistical overhead of managing many individual processes. Event-based reconstruction lends itself naturally to mutli-threaded processing. Emphasis will be placed on the multi-threading features of the framework. Test results of the scaling of event processing rates with number of threads are presented.

David Lawrence

2007-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "finish line event" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Multi-threaded Event Processing with JANA  

SciTech Connect (OSTI)

The C++ reconstruction framework JANA has been written to support the next generation of Nuclear Physics experiments at Jefferson Lab in anticipation of the 12GeV upgrade. This includes the GlueX experiment in the planned 4th experimental hall "Hall-D". The JANA framework was designed to allow multi-threaded event processing with a minimal impact on developers of reconstruction software. As we enter the multi-core era, thread-enabled code will become essential to utilizing the full processor power available without invoking the logistical overhead of managing many individual processes. Event-based reconstruction lends itself naturally to mutli-threaded processing. Emphasis will be placed on the multi-threading features of the framework. Test results of the scaling of event processing rates with number of threads will be shown.

David Lawrence

2008-11-01T23:59:59.000Z

322

Extreme events in discrete nonlinear lattices  

E-Print Network [OSTI]

We perform statistical analysis on discrete nonlinear waves generated though modulational instability in the context of the Salerno model that interpolates between the intergable Ablowitz-Ladik (AL) equation and the nonintegrable discrete nonlinear Schrodinger (DNLS) equation. We focus on extreme events in the form of discrete rogue or freak waves that may arise as a result of rapid coalescence of discrete breathers or other nonlinear interaction processes. We find power law dependence in the wave amplitude distribution accompanied by an enhanced probability for freak events close to the integrable limit of the equation. A characteristic peak in the extreme event probability appears that is attributed to the onset of interaction of the discrete solitons of the AL equation and the accompanied transition from the local to the global stochasticity monitored through the positive Lyapunov exponent of a nonlinear map.

A. Maluckov; Lj. Hadzievski; N. Lazarides; G. P. Tsironis

2009-01-22T23:59:59.000Z

323

Results from Beyond Design Basis Event Pilots | Department of...  

Broader source: Energy.gov (indexed) [DOE]

Results from Beyond Design Basis Event Pilots Results from Beyond Design Basis Event Pilots September 19, 2012 Presenter: Mike Hillman, Program Manager, Office of Health, Safety...

324

Events & Topics in Renewable Energy & the Environment featuring...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Events & Topics in Renewable Energy & the Environment featuring Chenyang Lu Events & Topics in Renewable Energy & the Environment featuring Chenyang Lu Smart Buildings with...

325

ERCOT Event on February 26, 2008: Lessons Learned  

SciTech Connect (OSTI)

The event analyzed in this paper is of special interest, and was widely reported on in the press, because wind generation played a partial role in the event.

Ela, E.; Kirby, B.

2008-07-01T23:59:59.000Z

326

Extreme hydro-meteorological events and their probabilities  

E-Print Network [OSTI]

Extreme hydro-meteorological events and their probabilities Jules Beersma #12;Promotor: Prof. dr. A Onderzoekschool (BBOS) #12;Extreme hydro-meteorological events and their probabilities Extreme hydro

Beersma, Jules

327

Electric Disturbance Events (OE-417) | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Electric Disturbance Events (OE-417) Electric Disturbance Events (OE-417) The Electric Emergency Incident and Disturbance Report (Form OE-417) collects information on electric...

328

NERSC training events: Data Transfer and Archiving; Chemistry...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

training events: Data Transfer and Archiving; Chemistry and Material Sciences Applications NERSC training events: Data Transfer and Archiving; Chemistry and Material Sciences...

329

A Solution NMR Investigation into the Early Events of Amelogenin...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Solution NMR Investigation into the Early Events of Amelogenin Nanosphere Self-Assembly Initiated with Sodium Chloride or A Solution NMR Investigation into the Early Events of...

330

Algal Biofuels Strategy Workshop - Fall Event | Department of...  

Broader source: Energy.gov (indexed) [DOE]

Fall Event Algal Biofuels Strategy Workshop - Fall Event The U.S. Department of Energy's (DOE) Bioenergy Technologies Office's (BETO's) Algae Program hosted the Algal Biofuels...

331

CHARYBDIS: A Black Hole Event Generator  

E-Print Network [OSTI]

CHARYBDIS is an event generator which simulates the production and decay of miniature black holes at hadronic colliders as might be possible in certain extra dimension models. It interfaces via the Les Houches accord to general purpose Monte Carlo programs like HERWIG and PYTHIA which then perform the parton evolution and hadronization. The event generator includes the extra-dimensional `grey-body' effects as well as the change in the temperature of the black hole as the decay progresses. Various options for modelling the Planck-scale terminal decay are provided.

C. M. Harris; P. Richardson; B. R. Webber

2003-07-24T23:59:59.000Z

332

Events - Combustion Energy Frontier Research Center  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series toESnet4:Epitaxial Thin Film XRDEvan Felix efelix Primary12:25EventsEvents

333

Elucidating the event-by-event flow fluctuations in heavy-ion collisions via the event shape selection technique  

E-Print Network [OSTI]

The presence of large event-by-event flow fluctuations in heavy ion collisions at RHIC and the LHC provides an opportunity to study a broad class of flow observables. This paper explores the correlations among harmonic flow coefficients $v_n$ and their phases $\\Phi_n$, and the rapidity fluctuation of $v_n$. The study is carried out usin Pb+Pb events generated by the AMPT model with fixed impact parameter. The overall ellipticity/triangularity of events is varied by selecting on the eccentricities $\\epsilon_n$ or the magnitudes of the flow vector $q_n$ for n=2 and 3, respectively. The responses of the $v_n$, the event-plane correlations, and the rapidity fluctuations, to the change in $\\epsilon_n$ and $q_n$ are then systematized. Strong positive correlations are observed among all even harmonics $v_2, v_4$, and $v_6$ (all increase with $q_2$), between $v_2$ and $v_5$ (both increase with $q_2$) and between $v_3$ and $v_5$ (both increase with $q_3$), consistent with the effects of nonlinear collective response. In contrast, an anti-correlation is observed between $v_2$ and $v_3$ similar to that seen between $\\epsilon_2$ and $\\epsilon_3$. These correlation patterns are found to be independent of whether selecting on $q_n$ or $\\epsilon_n$, validating the ability of $q_n$ in selecting the initial geometry. A forward/backward asymmetry of $v_n(\\eta)$ is observed for events selected on $q_n$ but not on $\\epsilon_n$, reflecting dynamical fluctuations exposed by the $q_n$ selection. Many event-plane correlators show good agreement between $q_n$ and $\\epsilon_n$ selections, suggesting that their variations with $q_n$ are controlled by the change of $\\epsilon_n$ in the initial geometry. Hence these correlators may serve as promising observables for disentangling the fluctuations generated in various stages of the evolution of the matter created in heavy ion collisions.

Peng Huo; Jiangyong Jia; Soumya Mohapatra

2014-09-11T23:59:59.000Z

334

Political Campaigning and Other Non-University Events on Game Days or Major Event Days  

E-Print Network [OSTI]

Political Campaigning and Other Non-University Events on Game Days or Major Event Days This Policy of this is the prohibition of any political signage implanted in, posted on, or otherwise affixed to University property in the political process, subject to other governing policies and procedures. Students: http

Oklahoma, University of

335

Events Rental Policies Karen Clark Events Coordinator Mildred Lane Kemper Art Museum  

E-Print Network [OSTI]

Events Rental Policies Karen Clark · Events Coordinator · Mildred Lane Kemper Art Museum Washington that the Museum's primary responsibility is for the preservation for the works of art entrusted to its care. No one is permitted to touch any artworks under any circumstances. The Museum staff reserves the right

Subramanian, Venkat

336

The Statistical and Numerical Study of the Longitudinally Asymmetric Distribution of Solar Proton Events Affecting the Earth Environment of 1996-2011  

E-Print Network [OSTI]

Large solar proton events (SPEs) affect the solar-terrestrial space environment and become a very important aspect in space weather research. In this work, we statistically investigate 78 solar proton events of 1996-2011 and find that there exists a longitudinally asymmetric distribution of flare sources of the solar proton events observed near 1 AU, namely, with the same longitude separation between magnetic field line footpoint of observer and flare sources, the number of the solar proton events originating from sources located at eastern side of the nominal magnetic footpoint of observer is much larger than that of the solar proton events originating from sources located at western side. A complete model calculation of solar energetic particle (SEP) propagation in the three-dimensional Parker interplanetary magnetic field is presented to give a numerical explanation for this longitudinally asymmetric distribution phenomenon. We find that the longitudinally asymmetric distribution of solar proton events res...

He, Hongqing

2015-01-01T23:59:59.000Z

337

A CSP Account of Event-B Refinement  

E-Print Network [OSTI]

Event-B provides a flexible framework for stepwise system development via refinement. The framework supports steps for (a) refining events (one-by-one), (b) splitting events (one-by-many), and (c) introducing new events. In each of the steps events can moreover possibly be anticipated or convergent. All such steps are accompanied with precise proof obligations. Still, it remains unclear what the exact relationship - in terms of a behaviour-oriented semantics - between an Event-B machine and its refinement is. In this paper, we give a CSP account of Event-B refinement, with a treatment for the first time of splitting events and of anticipated events. To this end, we define a CSP semantics for Event-B and show how the different forms of Event-B refinement can be captured as CSP refinement.

Schneider, Steve; Wehrheim, Heike; 10.4204/EPTCS.55.9

2011-01-01T23:59:59.000Z

338

Asymmetric Time Evolution and Indistinguishable Events  

SciTech Connect (OSTI)

With a time asymmetric theory, in which quantum mechanical time evolution is given by a semigroup of operators rather than by a group, the states of open systems are represented by density operators exhibiting a branching behavior. To treat the indistinguishably of the members of experimental ensembles, we hypothesize that environmental interference occurs during events that are themselves fundamentally indistinguishable.

Bryant, P. W. [Center for Complex Quantum Systems, Department of Physics, University of Texas at Austin, Austin, Texas 78712 (United States)

2010-11-25T23:59:59.000Z

339

Assessment of NGNP Moisture Ingress Events  

SciTech Connect (OSTI)

An assessment of modular HTGR moisture ingress events, making use of a phenomena identification and ranking process, was conducted by a panel of experts in the related areas for the U.S. next generation nuclear plant (NGNP) design. Consideration was given mainly to the prismatic core gas-cooled reactor configurations incorporating a steam generator within the primary circuit.

Bill Landman

2011-04-01T23:59:59.000Z

340

Neutrino induced events in the MINOS detectors  

SciTech Connect (OSTI)

The MINOS experiment is designed to study neutrino oscillations. It uses an accelerator generated beam of neutrinos and two detectors, the smaller at a distance of 1km and the larger at 735 km. By comparing the spectrum and flavour composition of the beam at the two detectors precise determinations of the oscillation parameters are possible. This thesis concentrates on the analysis of data from the larger Far Detector. By studying the spectrum of neutral current events it is possible to look for evidence of non-interacting 'sterile' neutrinos. The thesis describes how events are selected for this analysis, and a method for discriminating between charged current and neutral current events. The systematic uncertainties resulting from these cuts are evaluated. Several techniques for using Near Detector data to eliminate systematic uncertainties in the predicted Far Detector spectrum are compared. An oscillation analysis, based on the first year of MINOS data, uses the selected events to make a measurement of f{sub s}, the fraction of unseen neutrinos that are sterile. The measured value is f{sub s} = 0.07{sup +0.32} at 68%C.L., and is consistent with the standard three-neutrino picture, which has no sterile neutrino.

Litchfield, Reuben Phillip; /Oxford U.

2008-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "finish line event" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

University Communications and Marketing University Events & Programs  

E-Print Network [OSTI]

a University of New Hampshire student for public service and an affiliation with the U.S. military Strafford Ave., Durham, New Hampshire, 03824 ph.: 603 -862-1461 fax: 603-862-1188 Pease Greeters Scholarship Events & Programs New England Center, 15 Strafford Ave., Durham, New Hampshire, 03824 ph.: 603 -862

New Hampshire, University of

342

Extreme Events Met Data and Modeling  

E-Print Network [OSTI]

Extreme Events Met Data and Modeling: Needs and Challenges Data Collection and Analysis Modeling and Calibration Design, Construction, O&M Bruce Williams, University of Delaware Tuesday, July 2, 2013 #12;Extreme and marine operations ­ Fatigue and increased maintenance Tuesday, July 2, 2013 #12;What Defines "Extreme

Firestone, Jeremy

343

The MICE Muon Beam Line  

SciTech Connect (OSTI)

In the Muon Ionization Cooling Experiment (MICE) at RAL, muons are produced and transported in a dedicated beam line connecting the production point (target) to the cooling channel. We discuss the main features of the beamline, meant to provide muons with momenta between 140 MeV/c and 240 MeV/c and emittances up to 10 mm rad, which is accomplished by means of a diffuser. Matching procedures to the MICE cooling channel are also described. In summer 2010 we performed an intense data taking campaign to finalize the calibration of the MICE Particle Identification (PID) detectors and the understanding of the beam line, which completes the STEPI phase of MICE. We highlight the main results from these data.

Apollonio, Marco [High Energy Physics Group, Department of Physics, Imperial College London SW7 2AZ (United Kingdom)

2011-10-06T23:59:59.000Z

344

Dynamic Event Tree Analysis Through RAVEN  

SciTech Connect (OSTI)

Conventional Event-Tree (ET) based methodologies are extensively used as tools to perform reliability and safety assessment of complex and critical engineering systems. One of the disadvantages of these methods is that timing/sequencing of events and system dynamics is not explicitly accounted for in the analysis. In order to overcome these limitations several techniques, also know as Dynamic Probabilistic Risk Assessment (D-PRA), have been developed. Monte-Carlo (MC) and Dynamic Event Tree (DET) are two of the most widely used D-PRA methodologies to perform safety assessment of Nuclear Power Plants (NPP). In the past two years, the Idaho National Laboratory (INL) has developed its own tool to perform Dynamic PRA: RAVEN (Reactor Analysis and Virtual control ENvironment). RAVEN has been designed in a high modular and pluggable way in order to enable easy integration of different programming languages (i.e., C++, Python) and coupling with other application including the ones based on the MOOSE framework, developed by INL as well. RAVEN performs two main tasks: 1) control logic driver for the new Thermo-Hydraulic code RELAP-7 and 2) post-processing tool. In the first task, RAVEN acts as a deterministic controller in which the set of control logic laws (user defined) monitors the RELAP-7 simulation and controls the activation of specific systems. Moreover, RAVEN also models stochastic events, such as components failures, and performs uncertainty quantification. Such stochastic modeling is employed by using both MC and DET algorithms. In the second task, RAVEN processes the large amount of data generated by RELAP-7 using data-mining based algorithms. This paper focuses on the first task and shows how it is possible to perform the analysis of dynamic stochastic systems using the newly developed RAVEN DET capability. As an example, the Dynamic PRA analysis, using Dynamic Event Tree, of a simplified pressurized water reactor for a Station Black-Out scenario is presented.

A. Alfonsi; C. Rabiti; D. Mandelli; J. Cogliati; R. A. Kinoshita; A. Naviglio

2013-09-01T23:59:59.000Z

345

In-line thermoelectric module  

DOE Patents [OSTI]

A thermoelectric module with a plurality of electricity generating units each having a first end and a second end, the units being arranged first end to second end along an in-line axis. Each unit includes first and second elements each made of a thermoelectric material, an electrically conductive hot member arranged to heat one side of the first element, and an electrically conductive cold member arranged to cool another side of the first element and to cool one side of the second element. The hot member, the first element, the cold member and the second element are supported in a fixture, are electrically connected respectively to provide an electricity generating unit, and are arranged respectively in positions along the in-line axis. The individual components of each generating unit and the respective generating units are clamped in their in-line positions by a loading bolt at one end of the fixture and a stop wall at the other end of the fixture. The hot members may have a T-shape and the cold members an hourglass shape to facilitate heat transfer. The direction of heat transfer through the hot members may be perpendicular to the direction of heat transfer through the cold members, and both of these heat transfer directions may be perpendicular to the direction of current flow through the module.

Pento, Robert (Algonquin, IL); Marks, James E. (Glenville, NY); Staffanson, Clifford D. (S. Glens Falls, NY)

2000-01-01T23:59:59.000Z

346

In-Line Thermoelectric Module  

SciTech Connect (OSTI)

A thermoelectric module with a plurality of electricity generating units each having a first end and a second end, the units being arranged first end to second end along an-in-line axis. Each unit includes first and second elements each made of a thermoelectric material, an electrically conductive hot member arranged to heat one side of the first element, and an electrically conductive cold member arranged to cool another side of the first element and to cool one side of the second element. The hot member, the first element, the cold member and the second element are supported in a fixture, are electrically connected respectively to provide an electricity generating unit, and are arranged respectively in positions along the in-line axis. The individual components of each generating unit and the respective generating units are clamped in their in-line positions by a loading bolt at one end of the fixture and a stop wall at the other end of the fixture. The hot members may have a T-shape and the cold members an hourglass shape to facilitate heat transfer. The direction of heat transfer through the hot members may be perpendicular to the direction of heat transfer through the cold members, and both of these heat transfer directions maybe perpendicular to the direction-of current flow through the module.

Pento, Robert; Marks, James E.; Staffanson, Clifford D.

1998-07-28T23:59:59.000Z

347

Functional Data Analysis for Point Processes with Rare Events1  

E-Print Network [OSTI]

, for example, asthma patients will experience recurrent events of coughing and sputum (Sears et al. 1990

MĂĽller, Hans-Georg

348

Apparatus and method for detecting full-capture radiation events  

DOE Patents [OSTI]

An apparatus and method for sampling the output signal of a radiation detector and distinguishing full-capture radiation events from Compton scattering events. The output signal of a radiation detector is continuously sampled. The samples are converted to digital values and input to a discriminator where samples that are representative of events are identified. The discriminator transfers only event samples, that is, samples representing full-capture events and Compton events, to a signal processor where the samples are saved in a three-dimensional count matrix with time (from the time of onset of the pulse) on the first axis, sample pulse current amplitude on the second axis, and number of samples on the third axis. The stored data are analyzed to separate the Compton events from full-capture events, and the energy of the full-capture events is determined without having determined the energies of any of the individual radiation detector events.

Odell, Daniel M. C. (Aiken, SC)

1994-01-01T23:59:59.000Z

349

Apparatus and method for detecting full-capture radiation events  

DOE Patents [OSTI]

An apparatus and method are disclosed for sampling the output signal of a radiation detector and distinguishing full-capture radiation events from Compton scattering events. The output signal of a radiation detector is continuously sampled. The samples are converted to digital values and input to a discriminator where samples that are representative of events are identified. The discriminator transfers only event samples, that is, samples representing full-capture events and Compton events, to a signal processor where the samples are saved in a three-dimensional count matrix with time (from the time of onset of the pulse) on the first axis, sample pulse current amplitude on the second axis, and number of samples on the third axis. The stored data are analyzed to separate the Compton events from full-capture events, and the energy of the full-capture events is determined without having determined the energies of any of the individual radiation detector events. 4 figs.

Odell, D.M.C.

1994-10-11T23:59:59.000Z

350

CEDAR: tools for event generator tuning  

E-Print Network [OSTI]

I describe the work of the CEDAR collaboration in developing tools for tuning and validating Monte Carlo event generator programs. The core CEDAR task is to interface the Durham HepData database of experimental measurements to event generator validation tools such as the UCL JetWeb system - this has necessitated the migration of HepData to a new relational database system and a Java-based interaction model. The "number crunching" part of JetWeb is also being upgraded, from the Fortran HZTool library to the new C++ Rivet system and a generator interfacing layer named RivetGun. Finally, I describe how Rivet is already being used as a central part of a new generator tuning system, and summarise two other CEDAR activities, HepML and HepForge.

Andy Buckley

2007-08-30T23:59:59.000Z

351

Food Safety Guidelines for Events Guidelines should by reviewed by the event organizer at the time the event is submitted to  

E-Print Network [OSTI]

and food safety trainings. The Top 6 Causes of Food Poisoning: · Poor personal hygiene and sick foodFood Safety Guidelines for Events Guidelines should by reviewed by the event organizer at the time to groups planning to give away food for free or for a non-required donation at their events. Ohio State

352

Event-by-event study of CR composition with the SPHERE experiment using the 2013 data  

E-Print Network [OSTI]

We present an event-by-event study of cosmic ray (CR) composition with the reflected Cherenkov light method. The fraction of CR light component above 5 PeV was reconstructed using the 2013 run data of the SPHERE experiment which observed optical Vavilov-Cherenkov radiation of extensive air showers, reflected from snow surface of Lake Baikal. Additionally, we discuss a possibility to improve the elemental groups separability by means of multidimensional criteria.

Antonov, R A; Bonvech, E A; Chernov, D V; Dzhatdoev, T A; Finger, Mich; Finger, Mir; Galkin, V I; Podgrudkov, D A; Roganova, T M

2015-01-01T23:59:59.000Z

353

Orientation Week Events School of Computer Science  

E-Print Network [OSTI]

Orientation Week Events School of Computer Science September 8th ­ September 12th Monday 8th:00­16:00 Jack Cole 1.33a/b Computer Science Junior Honours Project Briefing MSc 14:30­16:30 John Honey 110 MSc to First Year Computer Science Students 1 10:15­10:45 John Honey 110 First Year Systems Briefing 4 10

Brierley, Andrew

354

CDF computing and event data models  

SciTech Connect (OSTI)

The authors discuss the computing systems, usage patterns and event data models used to analyze Run II data from the CDF-II experiment at the Tevatron collider. A critical analysis of the current implementation and design reveals some of the stronger and weaker elements of the system, which serve as lessons for future experiments. They highlight a need to maintain simplicity for users in the face of an increasingly complex computing environment.

Snider, F.D.; /Fermilab

2005-12-01T23:59:59.000Z

355

Tools for event generator tuning and validation  

E-Print Network [OSTI]

I describe the current status of MCnet tools for validating the performance of event generator simulations against data, and for tuning their phenomenological free parameters. For validation, the Rivet toolkit is now a mature and complete system, with a large library of prominent benchmark analyses. For tuning, the Professor system has recently completed its first tunes of Pythia 6, with substantial improvements on the existing default tune and potential to greatly aid the setup of new generators for LHC studies.

Andy Buckley

2008-09-26T23:59:59.000Z

356

Flash flooding events in south central Texas  

E-Print Network [OSTI]

. Heights in Peters. (Fran Henry, 1981 I. TABLE 1. Station information for Del Rio, Stephenville, and Victoria (from Henry, 1981). Station Name Station Number Call Elevation Letters m Latitude Lon itude Del Rio 72261 Stephenville 72Z60 Victoria... Totals Index (TTI) was computed for each rawinsonde station using the following formula: 16 TABLE 5. Neteorological elements used to determine the state of the atmosphere orior to flash flooding events over South Central Texas in a triangular area...

Utley, Tom Wilson

2012-06-07T23:59:59.000Z

357

Early Events in Ionic Liquid Radiation Chemistry  

SciTech Connect (OSTI)

Ionic liquids are interesting and useful materials whose solvation time scales are up to thousands of times longer than in conventional solvents. The extended lifetimes of pre-solvated electrons and other energetic species in ionic liquids has profound consequences for the radiolytic product distributions and reactivity patterns. We use a newly developed, multiplexed variation of pulse-probe spectroscopy to measure the kinetics of the early dynamical and reactive events in ionic liquids.

Wishart, J.F.; Cook, A.; Rimmer, R.D.; Gohdo, M.

2010-09-14T23:59:59.000Z

358

Sustainable Event Management: Opportunities and Trends  

E-Print Network [OSTI]

, wind power, hydrogen fuel cells, and paddle power. These methods have a minimum amount of emissions and zero fossil fuels (Jones 2010, 78-103) 20 2.5.2 Transportation Events require the transportation of people, goods, and equipment from... is the product Life Cycle Assessment (LCA). This method is about studying the impact of the proposed products and materials before ordering them. The second method is Ecological Footprinting. This method suggests calculating the weight of CO2 used from...

Almadani, Faisal S.

2012-12-14T23:59:59.000Z

359

Archived Meetings & Events | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels DataCombinedDepartment2015Services »of(BENEFIT) -Archived EAC Charters,Events

360

Identifying Wind and Solar Ramping Events: Preprint  

SciTech Connect (OSTI)

Wind and solar power are playing an increasing role in the electrical grid, but their inherent power variability can augment uncertainties in power system operations. One solution to help mitigate the impacts and provide more flexibility is enhanced wind and solar power forecasting; however, its relative utility is also uncertain. Within the variability of solar and wind power, repercussions from large ramping events are of primary concern. At the same time, there is no clear definition of what constitutes a ramping event, with various criteria used in different operational areas. Here the Swinging Door Algorithm, originally used for data compression in trend logging, is applied to identify variable generation ramping events from historic operational data. The identification of ramps in a simple and automated fashion is a critical task that feeds into a larger work of 1) defining novel metrics for wind and solar power forecasting that attempt to capture the true impact of forecast errors on system operations and economics, and 2) informing various power system models in a data-driven manner for superior exploratory simulation research. Both allow inference on sensitivities and meaningful correlations, as well as the ability to quantify the value of probabilistic approaches for future use in practice.

Florita, A.; Hodge, B. M.; Orwig, K.

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "finish line event" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Interpreting the M22 Spike Events  

E-Print Network [OSTI]

Recently Sahu et al., using the Hubble Space Telescope to monitor stars in the direction of the old globular cluster M22, detected six events in which otherwise constant stars brightened by ~50% during a time of 1 AU would have been ionized by random stellar encounters. Most unbound planets would have escaped the core via evaporation which preferentially affects such low-mass objects. Bound or free-floating planets can exist in the outer halo of M22; however, for reasonable assumptions, the maximum optical depth to such a population falls short of the observed optical depth, tau ~ 3x10^{-6}, by a factor of 5-10. Therefore, if real, these events represent the detection of a significant free-floating Galactic planet population. The optical depth to these planets is comparable to and mutually exclusive from the optical depth to resolved events measured by microlensing survey collaborations toward the bulge, and thus implies a similar additional mass of lensing objects. Such a population is difficult to reconcile with both theory and observations.

B. Scott Gaudi

2001-10-12T23:59:59.000Z

362

Mud return line connector apparatus  

SciTech Connect (OSTI)

The preferred and illustrated embodiment is a connector adapted to be joined above a blowout preventer and below the rotary table of a drilling rig. It collects the annular flow of returned drilling mud and directs mud to an incorporated, radially directed connective nipple. It enables the blowout preventer to be adjusted in location relative to the drilling rig and further accommodates a variable level of drilling mud in the annular space. The radial nipple connects with a mud line extending at some radial direction with a slope causing the mud to flow by gravity from the annular space to remote located mud tanks.

Ward, B.N.

1981-07-07T23:59:59.000Z

363

Chromospheric Dynamics and Line Formation  

E-Print Network [OSTI]

The solar chromosphere is very dynamic, due to the presence of large amplitude hydrodynamic waves. Their propagation is affected by NLTE radiative transport in strong spectral lines, which can in turn be used to diagnose the dynamics of the chromosphere. We give a basic introduction into the equations of NLTE radiation hydrodynamics and describe how they are solved in current numerical simulations. The comparison with observation shows that one-dimensional codes can describe strong brightenings quite well, but the overall chromospheric dynamics appears to be governed by three-dimensional shock propagation.

R. Hammer; P. Ulmschneider

2007-07-14T23:59:59.000Z

364

SPEAR3 Beam Line Availability  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared0 ResourceAwards SAGE Awards ,#2446Smalln n u a l rBeam Line

365

Capillary electrophoresis-fluorescence line narrowing system (CE-FLNS) for on-line structural characterization  

DOE Patents [OSTI]

Capillary electrophoresis (CE) is interfaced with low temperature fluorescence line-narrowing (FLN) spectroscopy for on-line structural characterization of separated molecular analytes. 21 figs.

Jankowiak, R.J.; Small, G.J.; Shields, P.A.

1999-04-27T23:59:59.000Z

366

Line Management Perspective: National Nuclear Security Administration...  

Broader source: Energy.gov (indexed) [DOE]

National Nuclear Security Administration (NNSA) Line Management Perspective: National Nuclear Security Administration (NNSA) Addthis Description Slide Presentation by Jim...

367

Title Line 2 Commercialization at the  

E-Print Network [OSTI]

-exclusive or exclusive license (royalty free or royalty bearing) ­ Researchers sign acknowledgment #12;Title Title Line 2

Czarnecki, Krzysztof

368

Refractory Lining Material Improves Gasifer Performance  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

water GASIFICATION CHAMBER the ENERGY lab NATIONAL ENERGY TECHNOLOGY LABORATORY Technology Transfer Refractory Lining Material Improves Gasifier Performance Award Winning...

369

Methods of Using Existing Wire Lines (power lines, phone lines, internet lines) for Totally Secure Classical Communication Utilizing Kirchoff's Law and Johnson-like Noise  

E-Print Network [OSTI]

We outline some general solutions to use already existing and currently used wire lines, such as power lines, phone lines, internet lines, etc, for the unconditionally secure communication method based on Kirchoff's Law and Johnson-like Noise (KLJN). Two different methods are shown. One is based on filters used at single wires and the other one utilizes a common mode voltage superimposed on a three-phase powerline.

Laszlo B. Kish

2006-10-02T23:59:59.000Z

370

Observations of the 6 Centimeter Lines of OH in Evolved (OH/IR) Stars  

E-Print Network [OSTI]

Recent observational and theoretical advances have called into question traditional OH maser pumping models in evolved (OH/IR) stars. The detection of excited-state OH lines would provide additional constraints to discriminate amongst these theoretical models. In this Letter, we report on VLA observations of the 4750 MHz and 4765 MHz lines of OH toward 45 sources, mostly evolved stars. We detect 4765 MHz emission in the star forming regions Mon R2 and LDN 1084, but we do not detect excited-state emission in any evolved stars. The flux density and velocity of the 4765 MHz detection in Mon R2 suggests that a new flaring event has begun.

Vincent L. Fish; Laura K. Zschaechner; Loránt O. Sjouwerman; Ylva M. Pihlström; Mark J. Claussen

2006-10-24T23:59:59.000Z

371

TRACE/PARCS Core Modeling of a BWR/5 for Accident Analysis of ATWS Events  

SciTech Connect (OSTI)

The TRACE/PARCS computational package [1, 2] isdesigned to be applicable to the analysis of light water reactor operational transients and accidents where the coupling between the neutron kinetics (PARCS) and the thermal-hydraulics and thermal-mechanics (TRACE) is important. TRACE/PARCS has been assessed for itsapplicability to anticipated transients without scram(ATWS) [3]. The challenge, addressed in this study, is to develop a sufficiently rigorous input model that would be acceptable for use in ATWS analysis. Two types of ATWS events were of interest, a turbine trip and a closure of main steam isolation valves (MSIVs). In the first type, initiated by turbine trip, the concern is that the core will become unstable and large power oscillations will occur. In the second type,initiated by MSIV closure,, the concern is the amount of energy being placed into containment and the resulting emergency depressurization. Two separate TRACE/PARCS models of a BWR/5 were developed to analyze these ATWS events at MELLLA+ (maximum extended load line limit plus)operating conditions. One model [4] was used for analysis of ATWS events leading to instability (ATWS-I);the other [5] for ATWS events leading to emergency depressurization (ATWS-ED). Both models included a large portion of the nuclear steam supply system and controls, and a detailed core model, presented henceforth.

Cuadra A.; Baek J.; Cheng, L.; Aronson, A.; Diamond, D.; Yarsky, P.

2013-11-10T23:59:59.000Z

372

An alternative parameterisation for binary-lens caustic-crossing events  

E-Print Network [OSTI]

Microlensing events are being discovered and alerted by the two survey teams OGLE and MOA at an increasing rate. Around ten percent of these events involve binary lenses. Such events potentially contain much information on the physical properties of the observed binary systems, which can then be used for e.g. statistical studies on binary objects in the Galactic disk or bulge. However, such events are usually not straightforward to study, because the model equations are strongly non-linear and there are many local minima that can fool the search for the best solution if the parameter space is not inspected with great care. In this work an alternative parameterisation for the binary lens fitting problem is proposed, in which the parameters involved are defined to represent as closely as possible the caustic-crossing features observed in most binary lens light curves. Furthermore, we work out an extension of the method in order to make use of the straight line fold caustic approximation, when the latter applies for both the caustic entry and exit. We introduce an alternative parameterisation in order to confine the exploration of the parameter space to regions where the models only involve caustic crossing at the dates seen in the light curve. We find that the proposed parameterisation provides more robustness to the light curve fitting process, in particular in avoiding a code to get stuck in false minima.

A. Cassan

2008-10-15T23:59:59.000Z

373

SIZE AND SURFACE AREA OF ICY DUST AGGREGATES AFTER A HEATING EVENT AT A PROTOPLANETARY NEBULA  

SciTech Connect (OSTI)

The activity of a young star rises abruptly during an FU Orionis outburst. This event causes a temporary temperature increase in the protoplanetary nebula. H{sub 2}O icy grains are sublimated by this event, and silicate cores embedded inside the ice are ejected. During the high-temperature phase, the silicate grains coagulate to form silicate core aggregates. After the heating event, the temperature drops, and the ice recondenses onto the aggregates. I determined numerically the size distribution of the ice-covered aggregates. The size of the aggregates exceeds 10 {mu}m around the snow line. Because of the migration of the ice to large aggregates, only a small fraction of the silicate core aggregate is covered with H{sub 2}O ice. After the heating event, the surface of an ice-covered aggregate is totally covered by silicate core aggregates. This might reduce the fragmentation velocity of aggregates when they collide. It is possible that the covering silicate cores shield the UV radiation field which induces photodissociation of H{sub 2}O ice. This effect may cause the shortage of cold H{sub 2}O vapor observed by Herschel.

Sirono, Sin-iti [Earth and Environmental Sciences, Graduate School of Environmental Studies, Nagoya University, Nagoya 464-8601 (Japan)] [Earth and Environmental Sciences, Graduate School of Environmental Studies, Nagoya University, Nagoya 464-8601 (Japan)

2013-03-01T23:59:59.000Z

374

PLANETARY AND OTHER SHORT BINARY MICROLENSING EVENTS FROM THE MOA SHORT-EVENT ANALYSIS  

SciTech Connect (OSTI)

We present the analysis of four candidate short-duration binary microlensing events from the 2006-2007 MOA Project short-event analysis. These events were discovered as a by-product of an analysis designed to find short-timescale single-lens events that may be due to free-floating planets. Three of these events are determined to be microlensing events, while the fourth is most likely caused by stellar variability. For each of the three microlensing events, the signal is almost entirely due to a brief caustic feature with little or no lensing attributable mainly to the lens primary. One of these events, MOA-bin-1, is due to a planet, and it is the first example of a planetary event in which the stellar host is only detected through binary microlensing effects. The mass ratio and separation are q (4.9 {+-} 1.4) Multiplication-Sign 10{sup -3} and s = 2.10 {+-} 0.05, respectively. A Bayesian analysis based on a standard Galactic model indicates that the planet, MOA-bin-1Lb, has a mass of m{sub p} = 3.7 {+-} 2.1 M{sub Jup} and orbits a star of M{sub *} = 0.75{sub -0.41}{sup +}0{sup .33} M{sub Sun} at a semimajor axis of a = 8.3{sub -2.7}{sup +4.5} AU. This is one of the most massive and widest separation planets found by microlensing. The scarcity of such wide-separation planets also has implications for interpretation of the isolated planetary mass objects found by this analysis. If we assume that we have been able to detect wide-separation planets with an efficiency at least as high as that for isolated planets, then we can set limits on the distribution of planets in wide orbits. In particular, if the entire isolated planet sample found by Sumi et al. consists of planets bound in wide orbits around stars, we find that it is likely that the median orbital semimajor axis is >30 AU.

Bennett, D. P. [Department of Physics, University of Notre Dame, Notre Dame, IN 46556 (United States); Sumi, T. [Department of Earth and Space Science, Osaka University, Osaka 560-0043 (Japan); Bond, I. A.; Ling, C. H. [Institute for Information and Mathematical Sciences, Massey University, Auckland 1330 (New Zealand); Kamiya, K.; Abe, F.; Fukui, A.; Furusawa, K.; Itow, Y.; Masuda, K.; Matsubara, Y.; Miyake, N.; Muraki, Y. [Solar-Terrestrial Environment Laboratory, Nagoya University, Nagoya 464-8601 (Japan); Botzler, C. S.; Rattenbury, N. J. [Department of Physics, University of Auckland, Private Bag 92-019, Auckland 1001 (New Zealand); Korpela, A. V.; Sullivan, D. J. [School of Chemical and Physical Sciences, Victoria University, Wellington (New Zealand); Kilmartin, P. M. [Mt. John Observatory, P.O. Box 56, Lake Tekapo 8770 (New Zealand); Ohnishi, K. [Nagano National College of Technology, Nagano 381-8550 (Japan); Saito, To., E-mail: bennett@nd.edu [Tokyo Metropolitan College of Aeronautics, Tokyo 116-8523 (Japan); Collaboration: MOA Collaboration; and others

2012-10-01T23:59:59.000Z

375

Unsplit bipolar pulse forming line  

DOE Patents [OSTI]

A bipolar pulse forming transmission line module and system for linear induction accelerators having first, second, third, and fourth planar conductors which form a sequentially arranged interleaved stack having opposing first and second ends, with dielectric layers between the conductors. The first and second planar conductors are connected to each other at the first end, and the first and fourth planar conductors are connected to each other at the second end via a shorting plate. The third planar conductor is electrically connectable to a high voltage source, and an internal switch functions to short at the first end a high voltage from the third planar conductor to the fourth planar conductor to produce a bipolar pulse at the acceleration axis with a zero net time integral. Improved access to the switch is enabled by an aperture through the shorting plate and the proximity of the aperture to the switch.

Rhodes, Mark A. (Pleasanton, CA)

2011-05-24T23:59:59.000Z

376

Gamma-Ray Burst Lines  

E-Print Network [OSTI]

The evidence for spectral features in gamma-ray bursts is summarized. As a guide for evaluating the evidence, the properties of gamma-ray detectors and the methods of analyzing gamma-ray spectra are reviewed. In the 1980's, observations indicated that absorption features below 100 keV were present in a large fraction of bright gamma-ray bursts. There were also reports of emission features around 400 keV. During the 1990's the situation has become much less clear. A small fraction of bursts observed with BATSE have statistically significant low-energy features, but the reality of the features is suspect because in several cases the data of the BATSE detectors appear to be inconsistent. Furthermore, most of the possible features appear in emission rather than the expected absorption. Analysis of data from other instruments has either not been finalized or has not detected lines.

Michael S. Briggs

1999-10-20T23:59:59.000Z

377

ENGINEERED BARRIER SYSTEM FEATURES, EVENTS AND PROCESSES  

SciTech Connect (OSTI)

The purpose of this report is to evaluate and document the inclusion or exclusion of engineered barrier system (EBS) features, events, and processes (FEPs) with respect to models and analyses used to support the total system performance assessment for the license application (TSPA-LA). A screening decision, either Included or Excluded, is given for each FEP along with the technical basis for exclusion screening decisions. This information is required by the U.S. Nuclear Regulatory Commission (NRC) at 10 CFR 63.114 (d, e, and f) [DIRS 173273]. The FEPs addressed in this report deal with those features, events, and processes relevant to the EBS focusing mainly on those components and conditions exterior to the waste package and within the rock mass surrounding emplacement drifts. The components of the EBS are the drip shield, waste package, waste form, cladding, emplacement pallet, emplacement drift excavated opening (also referred to as drift opening in this report), and invert. FEPs specific to the waste package, cladding, and drip shield are addressed in separate FEP reports: for example, ''Screening of Features, Events, and Processes in Drip Shield and Waste Package Degradation'' (BSC 2005 [DIRS 174995]), ''Clad Degradation--FEPs Screening Arguments (BSC 2004 [DIRS 170019]), and Waste-Form Features, Events, and Processes'' (BSC 2004 [DIRS 170020]). For included FEPs, this report summarizes the implementation of the FEP in the TSPA-LA (i.e., how the FEP is included). For excluded FEPs, this analysis provides the technical basis for exclusion from TSPA-LA (i.e., why the FEP is excluded). This report also documents changes to the EBS FEPs list that have occurred since the previous versions of this report. These changes have resulted due to a reevaluation of the FEPs for TSPA-LA as identified in Section 1.2 of this report and described in more detail in Section 6.1.1. This revision addresses updates in Yucca Mountain Project (YMP) administrative procedures as they pertain to this report; the current procedures are addressed in Section 2. This revision also addresses updates to the technical basis in supporting analysis and model reports and corroborative documentation, as presented in Sections 4 and 6 of this report. Finally, Sections 4, 5, and 6 of this report provide additional information pertaining to the relevant FEPs-related Acceptance Criteria presented in ''Yucca Mountain Review Plan, Final Report'' (YMRP) (NRC 2003 [DIRS 163274], Sections 2.2.1.2.1.3 and 2.2.1.3.3.3).

Jaros, W.

2005-08-30T23:59:59.000Z

378

Events leading to the Manhattan Project  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNG IHDR€ÍSolar Energy SystemsFebruary 7-8,March 8,8)Normal 27 1 54 312Events

379

Event Calendar - HPMC Occupational Health Services  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsing ZirconiaPolicy and Assistance100 tonusing ARMEven more Oak RidgeEvent Calendar

380

Workshops and Events | Department of Energy  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergy Cooperation | Department ofEnergy IsTestimonials WorkerDepartment ofofEvents Workshops and

Note: This page contains sample records for the topic "finish line event" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Energy Events UK Ltd | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision has beenFfe2fb55-352f-473b-a2dd-50ae8b27f0a6 No revisionWind,SoilsfilesystemEvents UK Ltd Jump to:

382

Events Calendar | Princeton Plasma Physics Lab  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest Region service area. TheEPSCI Home It isGasERP Submit an event

383

Fermilab | Visit Fermilab | Tours, Programs and Events  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest Region service area. TheEPSCI HomeTours, Programs and Events Tours

384

Training & Events - HPMC Occupational Health Services  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism in Layered NbS2Topo II: An EnzymePersonalTrackingTraining & Events

385

Jefferson Lab Nuclear Physics Events: Seminars  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFunInfraredJefferson Lab Click onLaser Twinkles inPEM Thisthe LaserEvents

386

Correlation of the scattering and dispersion events in the Crab Nebula pulsar  

E-Print Network [OSTI]

In separate series of observations of the Crab pulsar, pulse broadening due to scattering was measured at 111 MHz, and variations of dispersion due to pulse delay were measured at higher radio frequencies. In a remarkable event lasting 200 days a large increase occurred in both parameters and with similar time signatures. The increases in scattering and dispersion measure observed over the 200 days MJD 53950 - 54150 are attributable to the effects of an ionised cloud or filament crossing the line of sight. The cloud would be $10^11 - 10^12 m across, with electron density 10^3 - 10^4 cm^-3. The increased scattering might originate within the cloud itself, or the moving filament might induce turbulence in a separate higher density cloud in the line of sight.

A. Kuzmin; B. Ya. Losovsky; C. A. Jordan; F. Graham Smith

2008-02-29T23:59:59.000Z

387

Evolution of event-by-event ET fluctuations over collision centrality in RHIC interactions  

SciTech Connect (OSTI)

Preliminary results are presented for two analyses of transverse energy (ET) production measured with the electromagnetic calorimeters (EMC) of the Pioneering High Energy Nuclear Interaction Experiment (PHENIX), in relativistic nuclear interactions in Au+Au heavy-ion collisions created by the Relativistic Heavy Ion Collider (RHIC), at Brookhaven National Laboratory. Event-by-event ET distributions made across collision centrality were used in (1) measurements of 200 GeV , and (2) measurements of 200 GeV and 62.4 GeV ET distribution relative fluctuations {sigma}/ and {sigma}2/, where {sigma} is the standard deviation, and {sigma}2 the variance of each semi-inclusive distribution. Event centrality was selected in 5% wide bins and each bin represented by a modeled mean number of participant nucleons .

Armendariz, Raul [Department of Physics, New Mexico State University, Las Cruces, NM (United States)

2006-07-11T23:59:59.000Z

388

Time and event triggered communication scheduling for automotive applications  

E-Print Network [OSTI]

Time and event triggered communication scheduling for automotive applications ROGER JOHANSSON and event triggered communication scheduling for automotive applications 1 ROGER JOHANSSON Department triggered communication scheduling for automotive applications ROGER JOHANSSON © ROGER JOHANSSON, 2004

Johansson, Roger

389

Feb. 9 Event at Jefferson Lab Features Chemistry Demonstrations...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Feb. 9 Event at Jefferson Lab Features Chemistry Demonstrations Set to Pop Music NEWPORT NEWS, Va., Feb. 2, 2010 - Jefferson Lab's Feb. 9 Science Series event will feature members...

390

ATLAS Tracking Event Data Model -- 12.0.0  

E-Print Network [OSTI]

viewcvs-all.cgi/offline/? cvsroot=atlas : Tracking/TrkEvent/all.cgi/ offline/? cvsroot=atlas : Tracking/TrkEvent/all.cgi/offline/? cvsroot=atlas : Tracking/TrkDetDescr/

Akesson, F.; ATLAS

2009-01-01T23:59:59.000Z

391

Guidelines for Events In Cooperation with IACR February 2014  

E-Print Network [OSTI]

: · Acknowledge IACR's cooperation on all event promotional materials and on the event web site. The proper form of acknowledgement is In Cooperation with IACR. When used on the web, this should link to www.iacr.org. · Insert

International Association for Cryptologic Research (IACR)

392

Analytical inverse model for post-event attribution of plutonium  

E-Print Network [OSTI]

An integral part of deterring nuclear terrorism is the swift attribution of any event to a particular state or organization. By quickly being able to identify the responsible party after a nuclear event, appropriate people may be held accountable...

Miller, James Christopher

2009-05-15T23:59:59.000Z

393

Zero Energy Ready Home Events | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Residential Buildings Zero Energy Ready Home Zero Energy Ready Home Events Zero Energy Ready Home Events November 2014 < prev next > Sun Mon Tue Wed Thu Fri Sat 26 27 28 29...

394

Zero Energy Ready Home Events | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Residential Buildings Zero Energy Ready Home Zero Energy Ready Home Events Zero Energy Ready Home Events September 2014 < prev next > Sun Mon Tue Wed Thu Fri Sat 31 1 2 3 4 5...

395

Product Supplied for Finished Gasoline  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines AboutDecember 2005 (Thousand9,0,InformationU.S.Feet) Year JanProduct Guide435 8,610

396

Finished Motor Gasoline Net Production  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines AboutDecemberSteam Coal Import96NebraskaWells (MillionProductionFirst Second QuarterData

397

Plutonium Finishing Plant - Hanford Site  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar Home Design Passive SolarCenterYou are here:and Protein/RNA

398

The Event Horizon of M87  

E-Print Network [OSTI]

The 6 billion solar mass supermassive black hole at the center of the giant elliptical galaxy M87 powers a relativistic jet. Observations at millimeter wavelengths with the Event Horizon Telescope have localized the emission from the base of this jet to angular scales comparable to the putative black hole horizon. The jet might be powered directly by an accretion disk or by electromagnetic extraction of the rotational energy of the black hole. However, even the latter mechanism requires a confining thick accretion disk to maintain the required magnetic flux near the black hole. Therefore, regardless of the jet mechanism, the observed jet power in M87 implies a certain minimum mass accretion rate. If the central compact object in M87 were not a black hole but had a surface, this accretion would result in considerable thermal near-infrared and optical emission from the surface. Current flux limits on the nucleus of M87 strongly constrain any such surface emission. This rules out the presence of a surface and thereby provides indirect evidence for an event horizon.

Avery E. Broderick; Ramesh Narayan; John Kormendy; Eric S. Perlman; Marcia J. Rieke; Sheperd S. Doeleman

2015-03-12T23:59:59.000Z

399

Event generation with SHERPA 1.1  

SciTech Connect (OSTI)

In this paper the current release of the Monte Carlo event generator Sherpa, version 1.1, is presented. Sherpa is a general-purpose tool for the simulation of particle collisions at high-energy colliders. It contains a very flexible tree-level matrix-element generator for the calculation of hard scattering processes within the Standard Model and various new physics models. The emission of additional QCD partons off the initial and final states is described through a parton-shower model. To consistently combine multi-parton matrix elements with the QCD parton cascades the approach of Catani, Krauss, Kuhn and Webber is employed. A simple model of multiple interactions is used to account for underlying events in hadron-hadron collisions. The fragmentation of partons into primary hadrons is described using a phenomenological cluster-hadronization model. A comprehensive library for simulating tau-lepton and hadron decays is provided. Where available form-factor models and matrix elements are used, allowing for the inclusion of spin correlations; effects of virtual and real QED corrections are included using the approach of Yennie, Frautschi and Suura.

Gleisberg, T.; Hoche, Stefan.; Krauss, F.; Schoenherr, M.; Schumann, S.; Siegert, F.; Winter, J.

2008-12-18T23:59:59.000Z

400

Method and apparatus for distinguishing actual sparse events from sparse event false alarms  

DOE Patents [OSTI]

Remote sensing method and apparatus wherein sparse optical events are distinguished from false events. "Ghost" images of actual optical phenomena are generated using an optical beam splitter and optics configured to direct split beams to a single sensor or segmented sensor. True optical signals are distinguished from false signals or noise based on whether the ghost image is presence or absent. The invention obviates the need for dual sensor systems to effect a false target detection capability, thus significantly reducing system complexity and cost.

Spalding, Richard E. (Albuquerque, NM); Grotbeck, Carter L. (Albuquerque, NM)

2000-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "finish line event" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Events and Listeners Java Bootcamp -Villanova University Dr. Papalaskari 1  

E-Print Network [OSTI]

. //***************************************************************** private class ButtonListener implements Action that describes the event Buttons · A push button is defined by the JButton class · It generates an action event java.awt.event.*; import javax.swing.*; public class PushCounterPanel extends JPanel { private int

Papalaskari, Mary-Angela

402

TESLA: A Formally Defined Event Specification Language Gianpaolo Cugola  

E-Print Network [OSTI]

TESLA: A Formally Defined Event Specification Language Gianpaolo Cugola Dip. di Elettronica e to clearly state how the system should behave. Moving from these premises, we present TESLA, a complex event specification language. Each TESLA rule considers incoming data items as notifi- cations of events and defines

Cugola, Gianpaolo

403

Event-Based Approach to Modelling Dynamic Architecture  

E-Print Network [OSTI]

Event-Based Approach to Modelling Dynamic Architecture: Application to Mobile Ad-Hoc Network.Attiogbe@univ-nantes.fr Abstract. We describe an event-based approach to specifiy systems with dynamically evolving architecture tools. Keywords: Specification, Verification, Dynamic Architecture, Event B. 1 Introduction Distributed

Paris-Sud XI, Université de

404

AUDIO-VIDEO EVENT RECOGNITION SYSTEM FOR PUBLIC TRANSPORT SECURITY  

E-Print Network [OSTI]

AUDIO-VIDEO EVENT RECOGNITION SYSTEM FOR PUBLIC TRANSPORT SECURITY Van-Thinh Vu Quoc-Cuong Pham Keywords: audio-video surveillance, audio-video event, behavior analysis, event recognition. Abstract This paper presents an audio-video surveillance system for the automatic surveillance in public transport

Paris-Sud XI, Université de

405

CERN-TH.6275/91 Monte Carlo Event Generation  

E-Print Network [OSTI]

CERN-TH.6275/91 Monte Carlo Event Generation for LHC T. Sj¨ostrand CERN -- Geneva Abstract The necessity of event generators for LHC physics studies is illustrated, and the Monte Carlo approach is outlined. A survey is presented of existing event generators, followed by a more detailed study

Sjöstrand, Torbjörn

406

S:\\1Current Events\\CONV\\Who's Who List\\Marshals\\Instruc-chief marshal.docx Ceremonies & Events Office  

E-Print Network [OSTI]

S:\\1Current Events\\CONV\\Who's Who List\\Marshals\\Instruc-chief marshal.docx Ceremonies & Events MARSHAL _____________________________________________________________________________________ QUESTIONS-377-5084 To familiarize yourself with the role of the chief marshal on stage during the academic procession, national

Park, Edward

407

Event-by-event study of neutron observables in spontaneous and thermal fission  

SciTech Connect (OSTI)

The event-by-event fission model FREYA is extended to spontaneous fission of actinides and a variety of neutron observables are studied for spontaneous fission and fission induced by thermal neutrons with a view towards possible applications for SNM detection. We have shown that event-by-event models of fission, such as FREYA, provide a powerful tool for studying fission neutron correlations. Our results demonstrate that these correlations are significant and exhibit a dependence on the fissioning nucleus. Since our method is phenomenological in nature, good input data are especially important. Some of the measurements employed in FREYA are rather old and statistics limited. It would be useful to repeat some of these studies with modern detector techniques. In addition, most experiments made to date have not made simultaneous measurements of the fission products and the prompt observables, such as neutron and photons. Such data, while obviously more challenging to obtain, would be valuable for achieving a more complete understanding of the fission process.

Vogt, R; Randrup, J

2011-09-14T23:59:59.000Z

408

Gamma-Ray Line Observations with RHESSI  

E-Print Network [OSTI]

The Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI) has been observing gamma-ray lines from the Sun and the Galaxy since its launch in February 2002. Here I summarize the status of RHESSI observations of solar lines (nuclear de-excitation, neutron capture, and positron annihilation), the lines of $^{26}$Al and $^{60}$Fe from the inner Galaxy, and the search for positron annihilation in novae.

David M. Smith

2004-04-30T23:59:59.000Z

409

The Nonlinear Evolution of Rare Events  

E-Print Network [OSTI]

In this paper I consider the nonlinear evolution of a rare density fluctuation in a random density field with Gaussian fluctuations, and I rigorously show that it follows the spherical collapse dynamics applied to its mean initial profile. This result is valid for any cosmological model and is independent of the shape of the power spectrum. In the early stages of the dynamics the density contrast of the fluctuation is seen to follow with a good accuracy the form $$\\delta=(1-\\delta_L/1.5)^{-1.5}-1,$$ where $\\delta_L$ is the linearly extrapolated overdensity. I then investigate the validity domain of the rare event approximation in terms of the parameter $\

F. Bernardeau

1993-11-25T23:59:59.000Z

410

TECHNICAL BASIS DOCUMENT FOR NATURAL EVENT HAZARDS  

SciTech Connect (OSTI)

This technical basis document was developed to support the documented safety analysis (DSA) and describes the risk binning process and the technical basis for assigning risk bins for natural event hazard (NEH)-initiated accidents. The purpose of the risk binning process is to determine the need for safety-significant structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous conditions based on an evaluation of the frequency and consequence. Note that the risk binning process is not applied to facility workers, because all facility worker hazardous conditions are considered for safety-significant SSCs and/or TSR-level controls.

KRIPPS, L.J.

2006-07-31T23:59:59.000Z

411

Disruptive Event Biosphere Doser Conversion Factor Analysis  

SciTech Connect (OSTI)

The purpose of this report was to document the process leading to, and the results of, development of radionuclide-, exposure scenario-, and ash thickness-specific Biosphere Dose Conversion Factors (BDCFs) for the postulated postclosure extrusive igneous event (volcanic eruption) at Yucca Mountain. BDCF calculations were done for seventeen radionuclides. The selection of radionuclides included those that may be significant dose contributors during the compliance period of up to 10,000 years, as well as radionuclides of importance for up to 1 million years postclosure. The approach documented in this report takes into account human exposure during three different phases at the time of, and after, volcanic eruption. Calculations of disruptive event BDCFs used the GENII-S computer code in a series of probabilistic realizations to propagate the uncertainties of input parameters into the output. The pathway analysis included consideration of different exposure pathway's contribution to the BDCFs. BDCFs for volcanic eruption, when combined with the concentration of radioactivity deposited by eruption on the soil surface, allow calculation of potential radiation doses to the receptor of interest. Calculation of radioactivity deposition is outside the scope of this report and so is the transport of contaminated ash from the volcano to the location of the receptor. The integration of the biosphere modeling results (BDCFs) with the outcomes of the other component models is accomplished in the Total System Performance Assessment (TSPA), in which doses are calculated to the receptor of interest from radionuclides postulated to be released to the environment from the potential repository at Yucca Mountain.

M. Wasiolek

2000-12-28T23:59:59.000Z

412

Emergency Management Lines of Inquiry, April 2008  

Energy Savers [EERE]

Lines of Inquiry plansprotocols, interview facility managers and responders, and conduct facility walkdowns, as necessary. In : ment s and responsibilities for program...

413

DOE Sustainability Reporting Open Line Help Call  

Broader source: Energy.gov [DOE]

The Sustainability Performance Office (SPO) sponsors open line help calls to assist DOE sites and national laboratories with the annual sustainability reporting process. Representatives from the...

414

Transmission Line Security Monitor: Final Report  

SciTech Connect (OSTI)

The Electric Power Transmission Line Security Monitor System Operational Test is a project funded by the Technical Support Working Group (TSWG). TSWG operates under the Combating Terrorism Technical Support Office that functions under the Department of Defense. The Transmission Line Security Monitor System is based on technology developed by Idaho National Laboratory. The technology provides a means for real-time monitoring of physical threats and/or damage to electrical transmission line towers and conductors as well as providing operational parameters to transmission line operators to optimize transmission line operation. The end use is for monitoring long stretches of transmission lines that deliver electrical power from remote generating stations to cities and industry. These transmission lines are generally located in remote transmission line corridors where security infrastructure may not exist. Security and operational sensors in the sensor platform on the conductors take power from the transmission line and relay security and operational information to operations personnel hundreds of miles away without relying on existing infrastructure. Initiated on May 25, 2007, this project resulted in pre-production units tested in realistic operational environments during 2010. A technology licensee, Lindsey Manufacturing of Azusa California, is assisting in design, testing, and ultimately production. The platform was originally designed for a security monitoring mission, but it has been enhanced to include important operational features desired by electrical utilities.

John Svoboda

2011-04-01T23:59:59.000Z

415

Detonator comprising a nonlinear transmission line  

DOE Patents [OSTI]

Detonators are described herein. In a general embodiment, the detonator includes a nonlinear transmission line that has a variable capacitance. Capacitance of the nonlinear transmission line is a function of voltage on the nonlinear transmission line. The nonlinear transmission line receives a voltage pulse from a voltage source and compresses the voltage pulse to generate a trigger signal. Compressing the voltage pulse includes increasing amplitude of the voltage pulse and decreasing length of the voltage pulse in time. An igniter receives the trigger signal and detonates an explosive responsive to receipt of the trigger signal.

Elizondo-Decanini, Juan M

2014-12-30T23:59:59.000Z

416

On the Velocity and Intensity Line Asymmetries  

E-Print Network [OSTI]

We show that, if solar 5 min. oscillations are excited by convection in the upper layers of the convective envelope, it is impossible to explain the opposite line asymmetries observed in the velocity and intensity spectra with assumptions on the dissipations which reduce the problem to a second order one. The interpretation of that observation requires to solve the full non-adiabatic problem which is of the fourth or sixth order. We also analyze the causes of line asymmetries in the frame of the general problem and we show that to locate the source, it is better to study line asymmetries not too far from line centers.

M. Gabriel

1997-10-01T23:59:59.000Z

417

Asiakastyytyväisyystutkimus Sun Lines Oy:n tilausristeilyistä.  

E-Print Network [OSTI]

??Tämän tutkimuksellisen opinnäytetyön tarkoituksena on toteuttaa asiakastyytyväisyystutkimus Helsingin saaristossa risteilyliikennettä harjoittavan Sun Lines Oy:n tilausristeilyistä. Vuonna 1956 toimintansa aloittaneen perheyrityksen toimintaan kuuluvat tilausristeilyjen ohella linjaliikenne… (more)

Mattila, Outi

2010-01-01T23:59:59.000Z

418

North American Short Line and Regional Railroads Industry Report  

Broader source: Energy.gov (indexed) [DOE]

45G Short Line Tax Credit 45G Short Line Tax Credit government owned short lines government owned short lines State grants State grants D.O.E. investment D.O.E. investment...

419

Design of the Pluto Event Generator  

E-Print Network [OSTI]

We present the design of the simulation package Pluto, aimed at the study of hadronic interactions at SIS and FAIR energies. Its main mission is to offer a modular framework with an object-oriented structure, thereby making additions such as new particles, decays of resonances, new models up to modules for entire changes easily applicable. Overall consistency is ensured by a plugin- and distribution manager. Particular features are the support of a modular structure for physics process descriptions, and the possibility to access the particle stream for on-line modifications. Additional configuration and self-made classes can be attached by the user without re-compiling the package, which makes Pluto extremely configurable.

I. Froehlich; T. Galatyuk; R. Holzmann; J. Markert; B. Ramstein; P. Salabura; J. Stroth

2009-05-15T23:59:59.000Z

420

In-Line Crack and Stress Detection in Silicon Solar Cells Using Resonance Ultrasonic Vibrations  

SciTech Connect (OSTI)

Statement of Problem and Objectives. Wafer breakage in automated solar cell production lines is identified as a major technical problem and a barrier for further cost reduction of silicon solar module manufacturing. To the best of our knowledge, there are no commercial systems addressing critical needs for in-line inspection of the mechanical quality of solar wafers and cells. The principal objective of the SBIR program is to validate through experiments and computer modeling the applicability of the Resonance Ultrasonic Vibrations system, which ultimately can be used as a real-time in-line manufacturing quality control tool for fast detection of mechanically unstable silicon solar cells caused by cracks. The specific objective of Phase II is to move the technology of in-line crack detection from the laboratory level to commercial demonstration through development of a system prototype. The fragility of silicon wafers possessing low mechanical strength is attributed to peripheral and bulk millimeter-length cracks. The research program is based on feasibility results obtained during Phase I, which established that: (i) the Resonance Ultrasonic Vibrations method is applicable to as-cut, processed wafers and finished cells; (ii) the method sensitivity depends on the specific processing step; it is highest in as-cut wafers and lowest in wafers with metallization pattern and grid contacts; (iii) the system is capable of matching the 2.0 seconds per wafer throughput rate of state-of-art solar cell production lines; (iv) finite element modeling provides vibration mode analysis along with peak shift versus crack length and crack location dependence; (v) a high 91% crack rejection rate was confirmed through experimentation and statistical analysis. The Phase II project has the following specific tasks: (i) specify optimal configurations of the in-line system�¢����s component hardware and software; (ii) develop and justify a system prototype that meets major specifications for an in-line crack detection unit, such as high throughput rate, high level of stability, reproducibility of data acquisition and analysis, and high sensitivity with respect to crack length and crack location; (iii) design a system platform that allows easy integration within and adaptation to various solar cell belt-type production lines; (iv) develop a testing protocol providing quality certification of the production-grade system. Commercial Application of the proposed activity consists of bringing to the solar market a new high-tech product based on an innovative solution and patented methodology to contribute to cost reduction of silicon solar module production. The solar industry, with crystalline silicon as a dominant segment, shows outstanding performance, with approximately 25% yearly growth during the last years. Despite a slowdown with only 5.6 GW installations in 2009, solar module production for the 2010 and 2011 years was recovered. According to European Photonics Industry Consortium new solar PV installations grow by 56% compared to 2010 reached 64.7 GW in 2011. Revenues in the PV industry reached a record high of $93 billion in 2011, a 13.4 percent gain over 2010 â�� and 150 percent over 2009. This growth was forecasted to continue in 2013 with double digits growth. The solar industry is economically driven to make solar panels of the highest conversion efficiency and reliability at the lowest production cost. The Resonance Ultrasonic Vibration system addresses critical needs of the silicon-based solar industry by providing a quality control method and tool, which will improve productivity, increase reliability of products and reduce manufacturing cost of solar panels.

Ostapenko, Sergei

2013-04-03T23:59:59.000Z

Note: This page contains sample records for the topic "finish line event" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Wind-wind collision in the eta Carinae binary system - III. The HeII 4686 line profile  

E-Print Network [OSTI]

We modeled the HeII 4686 line profiles observed in the eta Carinae binary system close to the 2003.5 spectroscopic event, assuming that they were formed in the shocked gas that flows at both sides of the contact surface formed by wind-wind collision. We used a constant flow velocity and added turbulence in the form of a gaussian velocity distribution. We allowed emission from both the primary and secondary shocks but introduced infinite opacity at the contact surface, implying that only the side of the contact cone visible to the observer contributed to the line profile. Using the orbital parameters of the binary system derived from the 7 mm light curve during the last spectroscopic event (Paper II) we were able to reproduce the line profiles obtained with the HST at different epochs, as well as the line mean velocities obtained with ground based telescopes. A very important feature of our model is that the line profile depends on the inclination of the orbital plane; we found that to explain the latitude dependent mean velocity of the line, scattered into the line of sight by the Homunculus, the orbit inclination should be close to 90 degrees, meaning that it does not lie in the Homunculus equatorial plane, as usually assumed. This inclination, together with the relative position of the stars during the spectroscopic events, allowed us to explain most of the observational features, like the variation of the Purple Haze with the orbital phase, and to conciliate the X-ray absorption with the postulated shell effect used to explain the optical and UV light curves.

Z. Abraham; D. Falceta-Goncalves

2007-03-27T23:59:59.000Z

422

xDSL line driver design  

E-Print Network [OSTI]

xDSL line driver is a very important element in xDSL systems. This thesis proposes a three stage xDSL line driver solution based on a multipath feedforward compensation principle. TSMC 0.8 micro meter high voltage BiCMOS technology is used as a...

Zhang, Xiaoyong

2001-01-01T23:59:59.000Z

423

results and benefits... The Bittern Line Carbon  

E-Print Network [OSTI]

results and benefits... The Bittern Line Carbon Neutral Stations Transport Regeneration Ltd. June 2008 c a s e s t u d yCRed carbon reduction Project Summary Our client, Transport Regeneration Ltd., aims to make nine stations on the Bittern Line between Norwich and Sheringham carbon neutral

Everest, Graham R

424

LA NACION LINE Ciencia/Salud  

E-Print Network [OSTI]

LA NACION LINE Ciencia/Salud Viernes 4 de Abril de 2003 LA NACION LINE | Ed. Anteriores | 4 de Abril de 2003 | Ciencia/Salud | Nota Estudio del Museo Egidio Feruglio, de Trelew La diversidad vegetal://www.lanacion.com.ar/03/04/04/sl_486019.asp LA NACION | 04/04/2003 | Página 14 | Ciencia/Salud Volver a ediciones

Wilf, Peter

425

Dynamic simulation of polyester mooring lines  

E-Print Network [OSTI]

A numerical scheme, known as CABLE3D, originally developed for the simulation of dynamics of steel chain-wire mooring lines is extended to allow for the large elongation in a mooring line, the dependence of the modulus on tension, and energy...

Kim, Min Suk

2004-09-30T23:59:59.000Z

426

Line geometry and electromagnetism I: basic structures  

E-Print Network [OSTI]

Some key notions of line geometry are recalled, along with their application to mechanics. It is then shown that most of the basic structures that one introduces in the pre-metric formulation of electromagnetism can be interpreted directly in terms of corresponding concepts in line geometry. The results are summarized in a table.

D. H. Delphenich

2013-09-11T23:59:59.000Z

427

Electric Transmission Line Flashover Prediction System  

E-Print Network [OSTI]

Center since 1996 PSERC #12;Power Systems Engineering Research Center Electric Transmission LineElectric Transmission Line Flashover Prediction System Ph.D. Thesis and Final Project Report Power@asu.edu Power Systems Engineering Research Center This is a project report from the Power Systems Engineering

428

ENGINEERED BARRIER SYSTEM FEATURES, EVENTS, AND PROCESSES  

SciTech Connect (OSTI)

This analysis report is one of the technical reports containing documentation of the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), a biosphere model supporting the total system performance assessment (TSPA) for the license application (LA) for the Yucca Mountain repository. This analysis report describes the development of biosphere dose conversion factors (BDCFs) for the volcanic ash exposure scenario, and the development of dose factors for calculating inhalation dose during volcanic eruption. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1 - 1. This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling and provides an understanding of how this analysis report contributes to biosphere modeling. This report is one of two reports that develop biosphere BDCFs, which are input parameters for the TSPA model. The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes in detail the ERMYN conceptual model and mathematical model. The input parameter reports, shown to the right of the Biosphere Model Report in Figure 1-1, contain detailed descriptions of the model input parameters, their development and the relationship between the parameters and specific features, events and processes (FEPs). This report describes biosphere model calculations and their output, the BDCFs, for the volcanic ash exposure scenario. This analysis receives direct input from the outputs of the ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) and from the five analyses that develop parameter values for the biosphere model (BSC 2005 [DIRS 172827]; BSC 2004 [DIRS 169672]; BSC 2004 [DIRS 169673]; BSC 2004 [DIRS 169458]; and BSC 2004 [DIRS 169459]). The results of this report are further analyzed in the ''Biosphere Dose Conversion Factor Importance and Sensitivity Analysis'' (Figure 1 - 1). The objective of this analysis was to develop the BDCFs for the volcanic ash exposure scenario and the dose factors for calculating inhalation doses during volcanic eruption (eruption phase of the volcanic event). For the volcanic ash exposure scenario, the mode of radionuclide release into the biosphere is a volcanic eruption through the repository with the resulting entrainment of contaminated waste in the tephra and the subsequent atmospheric transport and dispersion of contaminated material in the biosphere. The biosphere process model for this scenario uses the surface deposition of contaminated ash as the source of radionuclides in the biosphere. The initial atmospheric transport and dispersion of the ash as well as its subsequent redistribution by fluvial and aeolian processes are not addressed within the biosphere model. These processes influence the value of the source term that is calculated elsewhere and then combined with the BDCFs in the TSPA model to calculate expected dose to the receptor.

na

2005-05-30T23:59:59.000Z

429

Swift follow-up observations of candidate gravitational-wave transient events  

E-Print Network [OSTI]

We present the first multi-wavelength follow-up observations of two candidate gravitational-wave (GW) transient events recorded by LIGO and Virgo in their 2009-2010 science run. The events were selected with low latency by the network of GW detectors and their candidate sky locations were observed by the Swift observatory. Image transient detection was used to analyze the collected electromagnetic data, which were found to be consistent with background. Off-line analysis of the GW data alone has also established that the selected GW events show no evidence of an astrophysical origin; one of them is consistent with background and the other one was a test, part of a "blind injection challenge". With this work we demonstrate the feasibility of rapid follow-ups of GW transients and establish the sensitivity improvement joint electromagnetic and GW observations could bring. This is a first step toward an electromagnetic follow-up program in the regime of routine detections with the advanced GW instruments expected within this decade. In that regime multi-wavelength observations will play a significant role in completing the astrophysical identification of GW sources. We present the methods and results from this first combined analysis and discuss its implications in terms of sensitivity for the present and future instruments.

P. A. Evans; J. K. Fridriksson; N. Gehrels; J. Homan; J. P. Osborne; M. Siegel; A. Beardmore; P. Handbauer; J. Gelbord; J. A. Kennea; M. Smith; Q. Zhu; J. Aasi; J. Abadie; B. P. Abbott; R. Abbott; T. D. Abbott; M. Abernathy; T. Accadia; F. Acernese; C. Adams; T. Adams; P. Addesso; R. Adhikari; C. Affeldt; M. Agathos; K. Agatsuma; P. Ajith; B. Allen; A. Allocca; E. Amador Ceron; D. Amariutei; S. B. Anderson; W. G. Anderson; K. Arai; M. C. Araya; S. Ast; S. M. Aston; P. Astone; D. Atkinson; P. Aufmuth; C. Aulbert; B. E. Aylott; S. Babak; P. Baker; G. Ballardin; S. Ballmer; Y. Bao; J. C. B. Barayoga; D. Barker; F. Barone; B. Barr; L. Barsotti; M. Barsuglia; M. A. Barton; I. Bartos; R. Bassiri; M. Bastarrika; A. Basti; J. Batch; J. Bauchrowitz; Th. S. Bauer; M. Bebronne; D. Beck; B. Behnke; M. Bejger; M. G. Beker; A. S. Bell; C. Bell; I. Belopolski; M. Benacquista; J. M. Berliner; A. Bertolini; J. Betzwieser; N. Beveridge; P. T. Beyersdorf; T. Bhadbade; I. A. Bilenko; G. Billingsley; J. Birch; R. Biswas; M. Bitossi; M. A. Bizouard; E. Black; J. K. Blackburn; L. Blackburn; D. Blair; B. Bland; M. Blom; O. Bock; T. P. Bodiya; C. Bogan; C. Bond; R. Bondarescu; F. Bondu; L. Bonelli; R. Bonnand; R. Bork; M. Born; V. Boschi; S. Bose; L. Bosi; B. Bouhou; S. Braccini; C. Bradaschia; P. R. Brady; V. B. Braginsky; M. Branchesi; J. E. Brau; J. Breyer; T. Briant; D. O. Bridges; A. Brillet; M. Brinkmann; V. Brisson; M. Britzger; A. F. Brooks; D. A. Brown; T. Bulik; H. J. Bulten; A. Buonanno; J. Burguet-Castell; D. Buskulic; C. Buy; R. L. Byer; L. Cadonati; G. Cagnoli; E. Calloni; J. B. Camp; P. Campsie; K. Cannon; B. Canuel; J. Cao; C. D. Capano; F. Carbognani; L. Carbone; S. Caride; S. Caudill; M. Cavaglia; F. Cavalier; R. Cavalieri; G. Cella; C. Cepeda; E. Cesarini; T. Chalermsongsak; P. Charlton; E. Chassande-Mottin; W. Chen; X. Chen; Y. Chen; A. Chincarini; A. Chiummo; H. S. Cho; J. Chow; N. Christensen; S. S. Y. Chua; C. T. Y. Chung; S. Chung; G. Ciani; F. Clara; D. E. Clark; J. A. Clark; J. H. Clayton; F. Cleva; E. Coccia; P. -F. Cohadon; C. N. Colacino; A. Colla; M. Colombini; A. Conte; R. Conte; D. Cook; T. R. Corbitt; M. Cordier; N. Cornish; A. Corsi; C. A. Costa; M. Coughlin; J. -P. Coulon; P. Couvares; D. M. Coward; M. Cowart; D. C. Coyne; J. D. E. Creighton; T. D. Creighton; A. M. Cruise; A. Cumming; L. Cunningham; E. Cuoco; R. M. Cutler; K. Dahl; M. Damjanic; S. L. Danilishin; S. D'Antonio; K. Danzmann; V. Dattilo; B. Daudert; H. Daveloza; M. Davier; E. J. Daw; R. Day; T. Dayanga; R. De Rosa; D. DeBra; G. Debreczeni; J. Degallaix; W. Del Pozzo; T. Dent; V. Dergachev; R. DeRosa; S. Dhurandhar; L. Di Fiore; A. Di Lieto; I. Di Palma; M. Di Paolo Emilio; A. Di Virgilio; M. Diaz; A. Dietz; F. Donovan; K. L. Dooley; S. Doravari; S. Dorsher; M. Drago; R. W. P. Drever; J. C. Driggers; Z. Du; J. -C. Dumas; S. Dwyer; T. Eberle; M. Edgar; M. Edwards; A. Effler; P. Ehrens; S. Eikenberry; G. Endroczi; R. Engel; T. Etzel; K. Evans; M. Evans; T. Evans; M. Factourovich; V. Fafone; S. Fairhurst; B. F. Farr; M. Favata; D. Fazi; H. Fehrmann; D. Feldbaum; I. Ferrante; F. Ferrini; F. Fidecaro; L. S. Finn; I. Fiori; R. P. Fisher; R. Flaminio; S. Foley; E. Forsi; L. A. Forte; N. Fotopoulos; J. -D. Fournier; J. Franc; S. Franco; S. Frasca; F. Frasconi; M. Frede; M. A. Frei; Z. Frei; A. Freise; R. Frey; T. T. Fricke; D. Friedrich; P. Fritschel; V. V. Frolov; M. -K. Fujimoto; P. J. Fulda; M. Fyffe; J. Gair; M. Galimberti; L. Gammaitoni; J. Garcia; F. Garufi; M. E. Gaspar; G. Gelencser; G. Gemme; E. Genin; A. Gennai; L. A. Gergely; S. Ghosh; J. A. Giaime; S. Giampanis; K. D. Giardina; A. Giazotto; S. Gil-Casanova; C. Gill; J. Gleason; E. Goetz; G. Gonzalez; M. L. Gorodetsky; S. Gossler; R. Gouaty; C. Graef; P. B. Graff; M. Granata; A. Grant; C. Gray; R. J. S. Greenhalgh; A. M. Gretarsson; C. Griffo; H. Grote; K. Grover; S. Grunewald; G. M. Guidi; C. Guido; R. Gupta; E. K. Gustafson; R. Gustafson; J. M. Hallam; D. Hammer; G. Hammond; J. Hanks; C. Hanna; J. Hanson; J. Harms; G. M. Harry; I. W. Harry; E. D. Harstad; M. T. Hartman; K. Haughian; K. Hayama; J. -F. Hayau; J. Heefner; A. Heidmann; M. C. Heintze; H. Heitmann; P. Hello; G. Hemming; M. A. Hendry; I. S. Heng; A. W. Heptonstall; V. Herrera; M. Heurs; M. Hewitson; S. Hild; D. Hoak; K. A. Hodge; K. Holt; M. Holtrop; T. Hong; S. Hooper; J. Hough; E. J. Howell; B. Hughey; S. Husa; S. H. Huttner; T. Huynh-Dinh; D. R. Ingram; R. Inta; T. Isogai; A. Ivanov; K. Izumi; M. Jacobson; E. James; Y. J. Jang; P. Jaranowski; E. Jesse; W. W. Johnson; D. I. Jones; R. Jones; R. J. G. Jonker; L. Ju; P. Kalmus; V. Kalogera; S. Kandhasamy; G. Kang; J. B. Kanner; M. Kasprzack; R. Kasturi; E. Katsavounidis; W. Katzman; H. Kaufer; K. Kaufman; K. Kawabe; S. Kawamura; F. Kawazoe; D. Keitel; D. Kelley; W. Kells; D. G. Keppel; Z. Keresztes; A. Khalaidovski; F. Y. Khalili; E. A. Khazanov

2012-11-23T23:59:59.000Z

430

Product Lines that supply other Product Lines: A Service-Oriented Approach Salvador Trujillo  

E-Print Network [OSTI]

Product Lines that supply other Product Lines: A Service-Oriented Approach Salvador Trujillo@uni-passau.de Abstract A software product line is a family of software products that share a set of core assets with the goal of reuse. In this paper, we focus on a scenario in which different products from different product

Apel, Sven

431

Unfolding of event-by-event net-charge distributions in heavy-ion collision  

E-Print Network [OSTI]

We discuss a method to obtain the true event-by-event net-charge multiplicity distributions from a corresponding measured distribution which is subjected to detector effects such as finite particle counting efficiency. The approach is based on the Bayes method for unfolding of distributions. We are able to faithfully unfold back the measured distributions to match with their corresponding true distributions obtained for a widely varying underlying particle production mechanism, beam energy and collision centrality. Particularly the mean, variance, skewness, kurtosis, their products and ratios of net-charge distributions from the event generators are shown to be successfully unfolded from the measured distributions constructed to mimic a real experimental distribution. We demonstrate the necessity to account for detector effects before associating the higher moments of net-charge distributions with physical quantities or phenomena. The advantage of this approach being that one need not construct new observable to cancel out detector effects which loose their ability to be connected to physical quantities calculable in standard theories.

P. Garg; D. K. Mishra; P. K. Netrakanti; A. K. Mohanty; B. Mohanty

2013-02-05T23:59:59.000Z

432

The Event Horizon of M87  

E-Print Network [OSTI]

The 6 billion solar mass supermassive black hole at the center of the giant elliptical galaxy M87 powers a relativistic jet. Observations at millimeter wavelengths with the Event Horizon Telescope have localized the emission from the base of this jet to angular scales comparable to the putative black hole horizon. The jet might be powered directly by an accretion disk or by electromagnetic extraction of the rotational energy of the black hole. However, even the latter mechanism requires a confining thick accretion disk to maintain the required magnetic flux near the black hole. Therefore, regardless of the jet mechanism, the observed jet power in M87 implies a certain minimum mass accretion rate. If the central compact object in M87 were not a black hole but had a surface, this accretion would result in considerable thermal near-infrared and optical emission from the surface. Current flux limits on the nucleus of M87 strongly constrain any such surface emission. This rules out the presence of a surface and th...

Narayan, Ramesh; Perlman, Eric S; Rieke, Marcia J; Doeleman, Sheperd S

2015-01-01T23:59:59.000Z

433

Features, Events, and Processes: system Level  

SciTech Connect (OSTI)

The purpose of this analysis report is to evaluate and document the inclusion or exclusion of the system-level features, events, and processes (FEPs) with respect to modeling used to support the total system performance assessment for the license application (TSPA-LA). A screening decision, either Included or Excluded, is given for each FEP along with the technical basis for screening decisions. This information is required by the U.S. Nuclear Regulatory Commission (NRC) at 10 CFR 63.113 (d, e, and f) (DIRS 156605). The system-level FEPs addressed in this report typically are overarching in nature, rather than being focused on a particular process or subsystem. As a result, they are best dealt with at the system level rather than addressed within supporting process-level or subsystem-level analyses and models reports. The system-level FEPs also tend to be directly addressed by regulations, guidance documents, or assumptions listed in the regulations; or are addressed in background information used in development of the regulations. For included FEPs, this analysis summarizes the implementation of the FEP in the TSPA-LA (i.e., how the FEP is included). For excluded FEPs, this analysis provides the technical basis for exclusion from the TSPA-LA (i.e., why the FEP is excluded). The initial version of this report (Revision 00) was developed to support the total system performance assessment for site recommendation (TSPA-SR). This revision addresses the license application (LA) FEP List (DIRS 170760).

D. McGregor

2004-10-15T23:59:59.000Z

434

Where are the binary source galactic microlensing events?  

E-Print Network [OSTI]

Though there have been some galactic microlensing events which show a clear signature of a binary lens, no event has yet been claimed as due to lensing of a binary source. Here I argue that this may be due to the fact that most of the binary source events show light curves which can be fitted with the simpler model of a blended single source.

M. Dominik

1998-01-13T23:59:59.000Z

435

COP 18 Side Event: Advancing Collaborative Action for Low Emissions...  

Open Energy Info (EERE)

Event: Advancing Collaborative Action for Low Emissions Development Jump to: navigation, search Low Emission Development Strategies Global Partnership Advancing climate-resilient,...

436

Webinar: What Can We Learn from Hydrogen Safety Event Databases?  

Broader source: Energy.gov [DOE]

Video recording of the Fuel Cell Technologies Office webinar, What Can We Learn from Hydrogen Safety Event Databases, originally presented on September 10, 2013.

437

Service for Research Management & Technology Transfer NEWS & EVENTS  

E-Print Network [OSTI]

Service for Research Management & Technology Transfer NEWS & EVENTS IX Premio de InvestigaciĂłn for Research Management & Technology Transfer #12;

Escolano, Francisco

438

Events Calendar | ANSER Center | Argonne-Northwestern National...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Show all events in April ALL DAY ANSER Center Symposium - Solar Electricity: Perovskite Solar Cells ANSER Center 8th Annual Symposium Solar Electricity: Perovskite Solar Cells *...

439

automatic trip events: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Websites Summary: The University of Western Ontario Student EventsField Trips Acknowledgement and Assumption of Risk of The University of Western Ontario, ( specific...

440

adverse events results: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

value of the parameter gives average event weights that are essentially independent of energy, initial quark flavour, multiplicity and jet topology. The influence of Bose-Estein...

Note: This page contains sample records for the topic "finish line event" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Leveraging Holidays and Other Events | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Network Driving Demand Peer Exchange Call Series: Leveraging Holidays and Other Events, Call Slides and Discussion Summary, November 7, 2013. Call Slides and Discussion Summary...

442

Disruptive Event Biosphere Dose Conversion Factor Analysis  

SciTech Connect (OSTI)

This analysis report is one of the technical reports containing documentation of the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), a biosphere model supporting the total system performance assessment (TSPA) for the license application (LA) for the Yucca Mountain repository. This analysis report describes the development of biosphere dose conversion factors (BDCFs) for the volcanic ash exposure scenario, and the development of dose factors for calculating inhalation dose during volcanic eruption. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling and provides an understanding of how this analysis report contributes to biosphere modeling. This report is one of two reports that develop biosphere BDCFs, which are input parameters for the TSPA model. The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes in detail the ERMYN conceptual model and mathematical model. The input parameter reports, shown to the right of the Biosphere Model Report in Figure 1-1, contain detailed descriptions of the model input parameters, their development and the relationship between the parameters and specific features, events and processes (FEPs). This report describes biosphere model calculations and their output, the BDCFs, for the volcanic ash exposure scenario. This analysis receives direct input from the outputs of the ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) and from the five analyses that develop parameter values for the biosphere model (BSC 2004 [DIRS 169671]; BSC 2004 [DIRS 169672]; BSC 2004 [DIRS 169673]; BSC 2004 [DIRS 169458]; and BSC 2004 [DIRS 169459]). The results of this report are further analyzed in the ''Biosphere Dose Conversion Factor Importance and Sensitivity Analysis''. The objective of this analysis was to develop the BDCFs for the volcanic ash exposure scenario and the dose factors for calculating inhalation doses during volcanic eruption (eruption phase of the volcanic event). For the volcanic ash exposure scenario, the mode of radionuclide release into the biosphere is a volcanic eruption through the repository with the resulting entrainment of contaminated waste in the tephra and the subsequent atmospheric transport and dispersion of contaminated material in the biosphere. The biosphere process model for this scenario uses the surface deposition of contaminated ash as the source of radionuclides in the biosphere. The initial atmospheric transport and dispersion of the ash as well as its subsequent redistribution by fluvial and aeolian processes are not addressed within the biosphere model. These processes influence the value of the source term that is calculated elsewhere and then combined with the BDCFs in the TSPA model to calculate expected dose to the receptor. Another objective of this analysis was to re-qualify the output of the previous revision (BSC 2003 [DIRS 163958]).

M. Wasiolek

2004-09-08T23:59:59.000Z

443

Topology of Event Horizons and Topological Censorship  

E-Print Network [OSTI]

We prove that, under certain conditions, the topology of the event horizon of a four dimensional asymptotically flat black hole spacetime must be a 2-sphere. No stationarity assumption is made. However, in order for the theorem to apply, the horizon topology must be unchanging for long enough to admit a certain kind of cross section. We expect this condition is generically satisfied if the topology is unchanging for much longer than the light-crossing time of the black hole. More precisely, let $M$ be a four dimensional asymptotically flat spacetime satisfying the averaged null energy condition, and suppose that the domain of outer communication $\\C_K$ to the future of a cut $K$ of $\\Sm$ is globally hyperbolic. Suppose further that a Cauchy surface $\\Sigma$ for $\\C_K$ is a topological 3-manifold with compact boundary $\\partial\\S$ in $M$, and $\\S'$ is a compact submanifold of $\\bS$ with spherical boundary in $\\S$ (and possibly other boundary components in $M/\\S$). Then we prove that the homology group $H_1(\\Sigma',Z)$ must be finite. This implies that either $\\partial\\S'$ consists of a disjoint union of 2-spheres, or $\\S'$ is nonorientable and $\\partial\\S'$ contains a projective plane. Further, $\\partial\\S=\\partial\\Ip[K]\\cap\\partial\\Im[\\Sp]$, and $\\partial \\Sigma$ will be a cross section of the horizon as long as no generator of $\\partial\\Ip[K]$ becomes a generator of $\\partial\\Im[\\Sp]$. In this case, if $\\S$ is orientable, the horizon cross section must consist of a disjoint union of 2-spheres.}

Ted Jacobson; Shankar Venkataramani

1994-10-31T23:59:59.000Z

444

Growth rate of late passage sarcoma cells is independent of epigenetic events but dependent on the amount of chromosomal aberrations  

SciTech Connect (OSTI)

Soft tissue sarcomas (STS) are characterized by co-participation of several epigenetic and genetic events during tumorigenesis. Having bypassed cellular senescence barriers during oncogenic transformation, the factors further affecting growth rate of STS cells remain poorly understood. Therefore, we investigated the role of gene silencing (DNA promoter methylation of LINE-1, PTEN), genetic aberrations (karyotype, KRAS and BRAF mutations) as well as their contribution to the proliferation rate and migratory potential that underlies “initial” and “final” passage sarcoma cells. Three different cell lines were used, SW982 (synovial sarcoma), U2197 (malignant fibrous histiocytoma (MFH)) and HT1080 (fibrosarcoma). Increased proliferative potential of final passage STS cells was not associated with significant differences in methylation (LINE-1, PTEN) and mutation status (KRAS, BRAF), but it was dependent on the amount of chromosomal aberrations. Collectively, our data demonstrate that these fairly differentiated/advanced cancer cell lines have still the potential to gain an additional spontaneous growth benefit without external influences and that maintenance of increased proliferative potential towards longevity of STS cells (having crossed senescence barriers) may be independent of overt epigenetic alterations. -- Highlights: Increased proliferative potential of late passage STS cells was: • Not associated with epigenetic changes (methylation changes at LINE-1, PTEN). • Not associated with mutation status of KRAS, BRAF. • Dependent on presence/absence of chromosomal aberrations.

Becerikli, Mustafa; Jacobsen, Frank; Rittig, Andrea; Köhne, Wiebke [Department of Plastic Surgery, BG University Hospital Bergmannsheil, Ruhr-University Bochum (Germany); Nambiar, Sandeep; Mirmohammadsadegh, Alireza; Stricker, Ingo; Tannapfel, Andrea [Institute of Pathology, Ruhr-University Bochum (Germany); Wieczorek, Stefan; Epplen, Joerg Thomas [Department of Human Genetics, Ruhr-University Bochum (Germany); Tilkorn, Daniel [Department of Plastic Surgery, BG University Hospital Bergmannsheil, Ruhr-University Bochum (Germany); Steinstraesser, Lars, E-mail: lars.steinstraesser@rub.de [Department of Plastic Surgery, BG University Hospital Bergmannsheil, Ruhr-University Bochum (Germany)

2013-07-15T23:59:59.000Z

445

All Upcoming Events > Events > The Energy Materials Center at Cornell  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation InInformationCenterResearch Highlights MediaFuelAbout UsAdvisoryUpcoming Events In This

446

Channelized voice over digital subscriber line  

E-Print Network [OSTI]

The objective of this article is to present a promising voice over digital subscriber line (VoDSL) solution: an alternative method that uses physical layer transportation to provide channelized VoDSL (CVoDSL). This article ...

Habib, A.; Saiedian, Hossein

2002-10-01T23:59:59.000Z

447

Temperatures in the blast furnace refractory lining  

SciTech Connect (OSTI)

The campaign life duration of a blast furnace is mainly determined by the condition of the refractory lining in heavy-duty zones such as the hearth, bosh, belly and lower stack. To achieve a desired lifetime, the temperature of the lining in these areas thereby proved to be the decisive controllable parameter. Low operating temperatures result in prolonged service life and are attained through high cooling efficiency. Besides the refractory grade chosen, the wear profile is mainly determined by the type of cooling system applied and the cooling intensity. Therefore, an appropriate compromise between long service life and energy losses has to be found in each case. In order to predict the service life of a lining it is important to know the wear condition at all times during the campaign. The paper describes the approaches the authors have made so far on European blast furnaces, on a theoretical and practical basis, on how to analyze the lining wear.

Hebel, R.; Streuber, C. [Didier-M and P Energietechnik GmbH, Wiesbaden (Germany); Steiger, R. [Didier-M and P Engineering Services, Highland, IN (United States); Jeschar, R. [TU Clausthal (Germany). Inst. fuer Energieverfahrenstechnik und Brennstofftechnik

1995-12-01T23:59:59.000Z

448

Ames Lab 101: Next Generation Power Lines  

SciTech Connect (OSTI)

Ames Laboratory scientist Alan Russell discusses the need to develop new power lines that are stronger and more conductive as a way to address the problem of the nation's aging and inadequate power grid.

Russell, Alan

2010-01-01T23:59:59.000Z

449

Insulate Steam Distribution and Condensate Return Lines  

SciTech Connect (OSTI)

This revised ITP tip sheet on insulating steam distribution and condensate return lines provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

Not Available

2006-01-01T23:59:59.000Z

450

Electrical Transmission Line Diametrical Retention Mechanism  

DOE Patents [OSTI]

The invention is a mechanism for retaining an electrical transmission line. In one embodiment of the invention it is a system for retaining an electrical transmission line within downhole components. The invention allows a transmission line to be attached to the internal diameter of drilling components that have a substantially uniform drilling diameter. In accordance with one aspect of the invention, the system includes a plurality of downhole components, such as sections of pipe in a drill string, drill collars, heavy weight drill pipe, and jars. The system also includes a coaxial cable running between the first and second end of a drill pipe, the coaxial cable having a conductive tube and a conductive core within it. The invention allows the electrical transmission line to withstand the tension and compression of drill pipe during routine drilling cycles.

Hall, David R. (Provo, UT); Hall, Jr., H. Tracy (Provo, UT); Pixton, David (Lehi, UT); Dahlgren, Scott (Provo, UT); Sneddon, Cameron (Provo, UT); Briscoe, Michael (Lehi, UT); Fox, Joe (Spanish Fork, UT)

2006-01-03T23:59:59.000Z

451

Line Environment, Safety and Health Oversight  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

Sets forth the Department's expectations line management environment, safety and health (ES&H) oversight and for the use of contractor self-assessment programs as the cornerstone for this oversight. Canceled by DOE O 226.1.

1997-06-26T23:59:59.000Z

452

Ames Lab 101: Next Generation Power Lines  

ScienceCinema (OSTI)

Ames Laboratory scientist Alan Russell discusses the need to develop new power lines that are stronger and more conductive as a way to address the problem of the nation's aging and inadequate power grid.

Russell, Alan

2012-08-29T23:59:59.000Z

453

IIR algorithms for adaptive line enhancement  

SciTech Connect (OSTI)

We introduce a simple IIR structure for the adaptive line enhancer. Two algorithms based on gradient-search techniques are presented for adapting the structure. Results from experiments which utilized real data as well as computer simulations are provided.

David, R.A.; Stearns, S.D.; Elliott, G.R.; Etter, D.M.

1983-01-01T23:59:59.000Z

454

Heat-Traced Fluid Transfer Lines  

E-Print Network [OSTI]

HEAT-TRACED FLUID TRANSFER LINES Robert E. Schilling, P.E. Eaton Corporation Aurora, Ohio This paper discusses basic considerations in designing a heat tracing system using either steam or electrical tracing. Four basic reasons to heat...

Schilling, R. E.

1984-01-01T23:59:59.000Z

455

What is the Broad Line Region?  

E-Print Network [OSTI]

What is the Broad Line Region (BLR) made of? What determines its location? Why is it sometimes missing? What controls its properties? Some recent results and new approaches which may shed light on these issues are briefly described.

Ari Laor

2003-12-16T23:59:59.000Z

456

Productivity Improvement of a Manual Assembly Line  

E-Print Network [OSTI]

The current project addresses the productivity improvement of a manual assembly line by making use of operations analysis in the framework of Lean production. A methodology is proposed that helps to improve the productivity of any production process...

Yerasi, Pranavi

2012-10-19T23:59:59.000Z

457

Grand Coulee Transmission Line Replacement Project  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

by the Bureau of Reclamation to design and construct six new 500-kV overhead transmission lines at Grand Coulee Dam. BPA will replace the existing underground transmission...

458

Corona losses in HVdc bipolar lines  

SciTech Connect (OSTI)

The problem related to the prediction of corona losses in HVdc bipolar lines has been solved, in the past, by means of semi-empirical monomial formulae. However, the proposed formulae that are simpler to use do not always give adequate calculation precision, while the formulae that provide the closest results require implicit functions of different complexity, which are difficult to apply; moreover, it is not possible to understand clearly what influence the variations of the different line parameters have on the losses themselves. The new monomial semi-empirical relationship, proposed to predict the corona losses in HVdc bipolar lines, is very simple to use; it highlights the dependence of power losses due to the corona effect by the different line parameters. The formula has been developed by elaborating a considerable amount of available experimental data.

Corbellini, U.; Pelacchi, P. [Univ. of Pisa (Italy). Dept. of Electric Systems and Automation] [Univ. of Pisa (Italy). Dept. of Electric Systems and Automation

1996-07-01T23:59:59.000Z

459

Lining Over Refractory - Conserve Energy and Capital  

E-Print Network [OSTI]

.~. LINING OVER REFRACTORY - CONSERVE ENERGY & CAPITAL by Mark L. Jost Gerald L. Barrows The Carborundum Company Niagara Falls, New York INTRODUCTION Companies operating industrial heating equip Advantages ment find themselves coming under...

Jost, M. L.; Barrows, G. L.

1980-01-01T23:59:59.000Z

460

The commercial development of water repellent coatings for high voltage transmission lines  

SciTech Connect (OSTI)

The purpose of the Cooperative Research and Development Agreement (CRADA) between UT-Battelle, LLC and Southwire Company was to jointly develop a low cost, commercially viable, water-repellant anti-icing coating system for high voltage transmission lines. Icing of power lines and other structures caused by freezing rain events occurs annually in the United States, and leads to severe and prolonged power outages. These outages cause untold economic and personal distress for many American families and businesses. Researchers at the Department of Energy s Oak Ridge National Laboratory (ORNL) in Oak Ridge, Tennessee have previously developed a set of superhydrophobic coatings with remarkable anti-icing properties that could potentially be sprayed or painted onto high-tension power lines and pylons. These coatings drastically reduce ice accumulation on these structures during freezing rain events. The project involved obtaining technical input, supplies and test high voltage cables from Southwire, along with the joint development of anti-icing coating techniques, which would result in a commercial license agreement between Southwire and ORNL, and potentially other companies requiring water repellent anti-icing coatings.

Hunter, Scott Robert [ORNL

2013-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "finish line event" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

The commercial development of water repellent coatings for high voltage transmission lines  

SciTech Connect (OSTI)

The purpose of the Cooperative Research and Development Agreement (CRADA) between UT-Battelle, LLC and Southwire Company was to jointly develop a low cost, commercially viable, water-repellant anti-icing coating system for high voltage transmission lines. Icing of power lines and other structures caused by freezing rain events occurs annually in the United States, and leads to severe and prolonged power outages. These outages cause untold economic and personal distress for many American families and businesses. Researchers at the Department of Energy?s Oak Ridge National Laboratory (ORNL) in Oak Ridge, Tennessee have previously developed a set of superhydrophobic coatings with remarkable anti-icing properties that could potentially be sprayed or painted onto high-tension power lines and pylons. These coatings drastically reduce ice accumulation on these structures during freezing rain events. The project involved obtaining technical input, supplies and test high voltage cables from Southwire, along with the joint development of anti-icing coating techniques, which would result in a commercial license agreement between Southwire and ORNL, and potentially other companies requiring water repellent anti-icing coatings.

Hunter, S. R. [ORNL] [ORNL; Daniel, A. [Southwire Company] [Southwire Company

2013-10-31T23:59:59.000Z

462

E-Print Network 3.0 - approval adverse event Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

DEFINITIONS & REGULATIONS Serious Adverse Event are any adverse experience... anomalybirth defect. Adverse events encompass both physical and psychological harms. Important...

463

Engineering Process Coordination based on A Service Event Notification Model  

E-Print Network [OSTI]

Engineering Process Coordination based on A Service Event Notification Model Jian Cao1, Jie Wang2 the project lifecycle process. Grid-based engineering service is a potentially useful technology for process coordination. Thus we propose a Grid service based event notification model to support engineering process

Stanford University

464

Quality of monitoring of stochastic events by periodic and ...  

E-Print Network [OSTI]

infeasible to transmit sensor data over long distances, or in an underground system of ... the case of static sensors, their placement to best protect people has been ... function of the event dynamics and type of events: (1) What is the QoM of a ... a class of periodic coverage algorithms considering the travel time overhead.

David K. Y. Yau, Nung Kwan Yip, Chris Y. T. Ma, Nageswara S. V. Rao, Mallikarjun Shankar

2010-08-28T23:59:59.000Z

465

CARD No. 33 Consideration of Drilling Events in Performance Assessments  

E-Print Network [OSTI]

CARD No. 33 Consideration of Drilling Events in Performance Assessments 33.A.1 BACKGROUND have an effect on the disposal system (61 FR 5228). Section 194.33, "Consideration of drilling events in performance assessments," sets forth specific requirements for incorporation of human-initiated drilling

466

Climatic regime shift and decadal anomalous events in China  

E-Print Network [OSTI]

Climatic regime shift and decadal anomalous events in China Weihong Qian & Xiang Lin & Yafen Zhu from China showed temporal and regional patterns in the last two to three centuries, including two. The coldest event occurred in the decade of 1965­1975 in eastern China, while the periods of 1920­1930, 1940

Qian, Weihong

467

Event Structure Semantics of Orc Sidney Rosario1  

E-Print Network [OSTI]

Event Structure Semantics of Orc Sidney Rosario1 , David Kitchin3 , Albert Benveniste1 , William into asymmetric event structures. The semantics is de- veloped for Orc, an orchestration language in which concurrent services are invoked to achieve a goal while managing time-outs, exceptions, and priority. Orc

Cook, William R.

468

Protecting bridges: reorganizing sensor networks after catastrophic events  

E-Print Network [OSTI]

: running out of energy, environmental events (e.g. forest fire, landslides) as well as the activity to the energy consumption occurring during normal functioning. However, catastrophic events, which unpredictably to the energy consumption during the normal course of operation. It is true that the energy consumption in a hop

Bölöni, Ladislau L

469

Mechanisms and modeling of single-event upset  

SciTech Connect (OSTI)

The basic mechanisms of single-event upset are reviewed, including charge collection in silicon junctions and transistors, and properties of single-event upset in CMOS static random access memory (SRAM) cells. The mechanisms are illustrated through the use of three-dimensional device and circuit simulations. Technology trends and implications for commercial devices are discussed.

Dodd, Paul E.

1998-10-12T23:59:59.000Z

470

FRMAC Interactions During a Radiological or Nuclear Event  

SciTech Connect (OSTI)

During a radiological or nuclear event of national significance the Federal Radiological Emergency Monitoring and Assessment Center (FRMAC) assists federal, state, tribal, and local authorities by providing timely, high-quality predictions, measurements, analyses and assessments to promote efficient and effective emergency response for protection of the public and the environment from the consequences of such an event.

Wong, C T

2011-01-27T23:59:59.000Z

471

An EMF Framework for Event-B Developed by  

E-Print Network [OSTI]

, *.bcc, ... StaticChecker Marker UI API Prover #12;Motivation for Event-B EMF · UML-B ­ reimplementation-B API Marker Persistence #12;Event-B Metamodel · Core package ­ Abstract basis ­ Extension mechanism resolve attempted.... ­ ... Automatically construct rest of URI ... · Project/resource from containing

Southampton, University of

472

Solar Transient Events and their importance for Coronal Heating  

E-Print Network [OSTI]

1 Solar Transient Events and their importance for Coronal Heating J. Gerry Doyle and Maria S to understanding how the solar plasma is accel- erated and heated may well be found in the study of these small that these small-scale events may well have broad implications for the mass and energy balance of the whole upper

473

Department of Computing Stepwise Refinement in Event-B||CSP  

E-Print Network [OSTI]

in Event-B||CSP Part 1: Safety Steve Schneider, Helen Treharne and Heike Wehrheim March 12th 2011 #12;Stepwise Refinement in Event-B CSP Part 1: Safety Steve Schneider1 Helen Treharne1 Heike Wehrheim2 1, 2011 Contents 1 Introduction 3 2 CSP 3 2.1 Notation

Doran, Simon J.

474

UNIVERSITY OF WISCONSIN MADISON 2014 YOUTH EVENT HEALTH FORM  

E-Print Network [OSTI]

-the-counter medications are available from camp health staff. Name of primary care provider: Phone Number: Medications 111/8/2013 UNIVERSITY OF WISCONSIN ­ MADISON 2014 YOUTH EVENT HEALTH FORM Event Name: Dates of insurance card here) Policy #: HEALTH INFORMATION (CHECK ALL THAT APPLY) Asthma Is an inhaler required

Wisconsin at Madison, University of

475

Identifying Transformer Incipient Events for Maintaining Distribution System Reliability  

E-Print Network [OSTI]

Identifying Transformer Incipient Events for Maintaining Distribution System Reliability Karen L events in single-phase distribution transformers. This analysis will aid in the development of an automatic detection method for internal incipient faults in the transformers. The detection method can

476

The Anatomy of Plastic Events in Magnetic Amorphous Solids  

E-Print Network [OSTI]

Plastic events in amorphous solids can be much more than just "shear transformation zones" when the positional degrees of freedom are coupled non-trivially to other degrees of freedom. Here we consider magnetic amorphous solids where mechanical and magnetic degrees of freedom interact, leading to rather complex plastic events whose nature must be disentangled. In this paper we uncover the anatomy of the various contributions to some typical plastic events. These plastic events are seen as Barkhausen Noise or other "serrated noises". Using theoretical considerations we explain the observed statistics of the various contributions to the considered plastic events. The richness of contributions and their different characteristics imply that in general the statistics of these "serrated noises" cannot be universal, but rather highly dependent on the state of the system and on its microscopic interactions.

H. George E. Hentschel; Itamar Procaccia; Bhaskar Sen Gupta

2015-01-25T23:59:59.000Z

477

Implications of the 1100 UT March 22, 1979 CDAW 6 substorm event for the role of magnetic reconnection in the geomagnetic tail  

SciTech Connect (OSTI)

The event of March 22, 1979 has been the object of a concentrated study effort as a part of the Coordinated Data Analysis Workshop activity designated CDAW-6. Energetic electron and magnetic field measurements from a set of four satellites aligned from 6.6 to 13 R/sub E/ at the 0200 LT meridian at the time of the magnetospheric substorm event of 1100 UT are presented. These data are used to show that a magnetic X-line formed spontaneously in the vicinity of 7 R/sub E/ in response to a steady build-up of magnetic stress in the geomagnetic tail.

Fritz, T.A.; Baker, D.N.; McPherron, R.L.; Lennartsson, W.

1983-01-01T23:59:59.000Z

478

The first SEPServer event catalogue ~68-MeV solar proton events observed at 1 AU in 19962010  

E-Print Network [OSTI]

The first SEPServer event catalogue ~68-MeV solar proton events observed at 1 AU in 1996­2010 Rami of Helsinki, 00014 Helsinki, Finland *Corresponding author: e-mail: rami.vainio@helsinki.fi 2 Department of Physics and Astronomy, University of Turku, 20014 Finland 3 Institut fu¨r Experimentelle und Angewandte

Usoskin, Ilya G.

479

Nano-Domain Analysis Via Massive Cluster Secondary Ion Mass Spectrometry in the Event-by-Event Mode  

E-Print Network [OSTI]

clusters useful probes to obtain molecular information from both nano-objects and nano-domains. The "event-by-event bombardment/detection mode" probes nano-objects one-at-a-time, while collecting and storing the corresponding secondary ion (SI) information...

Pinnick, Veronica Tiffany

2011-02-22T23:59:59.000Z

480

S:\\1Current Events\\CONV\\Who's Who List\\Marshals\\Instruc-faculty marshal.docx Ceremonies & Events Office  

E-Print Network [OSTI]

S:\\1Current Events\\CONV\\Who's Who List\\Marshals\\Instruc-faculty marshal.docx Ceremonies & Events MARSHAL _____________________________________________________________________________________ QUESTIONS-377-5084 For a list of Chief Marshals on convocation day, please refer back to: http://www.sfu.ca/convocation/faculty/marshals

Park, Edward

Note: This page contains sample records for the topic "finish line event" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

S:\\1Current Events\\CONV\\Who's Who List\\Marshals\\Instruc-grad marshal.docx Ceremonies & Events Office  

E-Print Network [OSTI]

S:\\1Current Events\\CONV\\Who's Who List\\Marshals\\Instruc-grad marshal.docx Ceremonies & Events MARSHAL _____________________________________________________________________________________ QUESTIONS-377-5084 For a list of Chief Marshals on convocation day, please refer back to: http://www.sfu.ca/convocation/faculty/marshals

Park, Edward

482

New Construction of Distribution Lines, Service Lines, and Appurtenant Facilities in Residential Subdivisions (New York)  

Broader source: Energy.gov [DOE]

Any proposed construction of electricity-related facilities in residential subdivisions, including distribution and service lines and appurtenant facilities, is subject to these regulations, which...

483

Genetic diversity and combining ability among sorghum conversion lines  

E-Print Network [OSTI]

on genetic similarities estimated using AFLP markers and (3) to estimate heterosis, general and specific combining ability for grain yield among the set of conversion lines. Genetic diversity was present in the set of conversion lines evaluated. For the lines...

Mateo Moncada, Rafael Arturo

2007-04-25T23:59:59.000Z

484

MATHEMATICAL ANALYSIS OF CONDUCTING AND SUPERCONDUCTING TRANSMISSION LINES  

E-Print Network [OSTI]

MATHEMATICAL ANALYSIS OF CONDUCTING AND SUPERCONDUCTING TRANSMISSION LINES ANNE-SOPHIE BONNET propagation in the microstrip transmission lines used in microelectronics. In the first part, the case of the perfectly conducting strip. Key words. superconducting transmission lines, waveguides, spectral analysis

Ramdani, Karim - Institut de Mathématiques �lie Cartan, Université Henri Poincaré

485

Waveform Relaxation Technique for Longitudinal Partitioning of Transmission Lines  

E-Print Network [OSTI]

Waveform Relaxation Technique for Longitudinal Partitioning of Transmission Lines Martin Gander problem for multiple coupled transmission lines by a so-called transverse partitioning technique. The WR mode transmission line problems. Previous longitudinal partitioning work using the classical WR

Gander, Martin J.

486

A high accuracy computed water line list  

E-Print Network [OSTI]

A computed list of H$_{2}$$^{16}$O infra-red transition frequencies and intensities is presented. The list, BT2, was produced using a discrete variable representation two-step approach for solving the rotation-vibration nuclear motions. It is the most complete water line list in existence, comprising over 500 million transitions (65% more than any other list) and it is also the most accurate (over 90% of all known experimental energy levels are within 0.3 cm$^{-1}$ of the BT2 values). Its accuracy has been confirmed by extensive testing against astronomical and laboratory data. The line list has been used to identify individual water lines in a variety of objects including: comets, sunspots, a brown dwarf and the nova-like object V838 Mon. Comparison of the observed intensities with those generated by BT2 enables physical values to be derived for these objects. The line list can also be used to provide an opacity for models of the atmospheres of M-dwarf stars and assign previously unknown water lines in laboratory spectra.

R. J. Barber; J. Tennyson; G. J. Harris; R. N. Tolchenov

2006-01-11T23:59:59.000Z

487

SOLAR ENERGETIC PARTICLE EVENTS AND THE KIPLINGER EFFECT  

SciTech Connect (OSTI)

The Kiplinger effect is an observed association of solar energetic (E > 10 MeV) particle (SEP) events with a 'soft-hard-harder' (SHH) spectral evolution during the extended phases of the associated solar hard (E > 30 keV) X-ray (HXR) flares. Besides its possible use as a space weather predictor of SEP events, the Kiplinger effect has been interpreted as evidence of SEP production in the flare site itself, contradicting the widely accepted view that particles of large SEP events are predominately or entirely accelerated in shocks driven by coronal mass ejections (CMEs). We review earlier work to develop flare soft X-ray (SXR) and HXR spectra as SEP event forecast tools and then examine recent Reuven Ramaty High-Energy Solar Spectroscopic Imager (RHESSI) evidence supporting the association of SHH HXR flares with large SEP events. We point out that ad hoc prediction criteria using the CME widths and SXR flare durations of associated RHESSI hard X-ray bursts (HXBs) can yield results comparable to those of the SHH prediction criteria. An examination of the RHESSI dynamic plots reveals several ambiguities in the determination of whether and when the SHH criteria are fulfilled, which must be quantified and applied consistently before an SHH-based predictive tool can be made. A comparative HXR spectral study beginning with the large population of relatively smaller SEP events has yet to be done, and we argue that those events will not be so well predicted by the SHH criteria. SHH HXR flares and CMEs are both components of large eruptive flare events, which accounts for the good connection of the SHH HXR flares with SEP events.

Kahler, S. W., E-mail: AFRL.RVB.PA@hanscom.af.mil [Air Force Research Laboratory, RVBXS, 3550 Aberdeen Avenue, Kirtland AFB, NM 87117 (United States)

2012-03-01T23:59:59.000Z

488

EIS-0447: Champlain Hudson Power Express Transmission Line Project...  

Broader source: Energy.gov (indexed) [DOE]

7: Champlain Hudson Power Express Transmission Line Project, New York EIS-0447: Champlain Hudson Power Express Transmission Line Project, New York Summary This EIS evaluates the...

489

EA-1880: Big Bend to Witten Transmission Line Project, South...  

Office of Environmental Management (EM)

880: Big Bend to Witten Transmission Line Project, South Dakota EA-1880: Big Bend to Witten Transmission Line Project, South Dakota Summary The USDA Rural Utilities Service, with...

490

Request for Information on Permitting of Transmission Lines:...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Request for Information on Permitting of Transmission Lines: Federal Register Notice Volume 77, No. 38 - Feb. 27, 2012 Request for Information on Permitting of Transmission Lines:...

491

alpha line profile: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

calculations of IP line profiles based on hot model distributions of interplanetary hydrogen. We also find that the line profiles get narrower during solar maximum. The results...

492

Extreme events in excitable systems and mechanisms of their generation  

E-Print Network [OSTI]

We study deterministic systems, composed of excitable units of FitzHugh-Nagumo type, that are capable of self-generating and self-terminating strong deviations from their regular dynamics without the influence of noise or parameter change. These deviations are rare, short-lasting, and recurrent and can therefore be regarded as extreme events. Employing a range of methods we analyze dynamical properties of the systems, identifying features in the systems' dynamics that may qualify as precursors to extreme events. We investigate these features and elucidate mechanisms that may be responsible for the generation of the extreme events.

Gerrit Ansmann; Rajat Karnatak; Klaus Lehnertz; Ulrike Feudel

2014-08-27T23:59:59.000Z

493

Load-resistant coaxial transmission line  

DOE Patents [OSTI]

A transmission line for downhole tools that make up all or part of a tool string for drilling and production of oil, gas, and geothermal wells that can withstand the dynamic gravitational forces and other accelerations associated with downhole excavations. The transmission line has a metal tube, or outer conductor, that houses a coaxial wire inner conductor. A non-metallic dielectric material is interposed between the inner and outer conductors. The outer and inner conductors and the dielectric are sufficiently compressed together so that independent motion between them is abated. Compression of the components of the transmission line may be achieved by drawing the transmission through one or more dies in order to draw down the outer conductor onto the dielectric, or by expanding the inner conductor against the dielectric using a mandrel or hydraulic pressure. Non-metallic bead segments may be used in aid of the compression necessary to resist the dynamic forces and accelerations of drilling.

Hall, David R.; Fox, Joe

2006-01-03T23:59:59.000Z

494

Dynamic Line Rating: Research and Policy Evaluation  

SciTech Connect (OSTI)

Dynamic Line Rating (DLR) is a smart grid technology that allows the rating of electrical conductors to be increased based on local weather conditions. Overhead lines are conventionally given a conservative rating based on worst case scenarios. We demonstrate that observing the conditions in real time leads to additional capacity and safer operation. This paper provides a report of a pioneering scheme in the United States of America in which DLR has been applied. Thereby, we demonstrate that observing the local weather conditions in real time leads to additional capacity and safer operation. Secondly, we discuss limitations involved. In doing so, we arrive at novel insights which will inform and improve future DLR projects. Third, we provide a policy background and discussion to clarify the technology’s potential and identifies barriers to the imminent adoption of dynamic line rating systems. We provide suggestions for regulatory bodies about possible improvements in policy to encourage adoption of this beneficial technology.

Jake P. Gentle; Kurt S. Myers; Michael R. West

2014-07-01T23:59:59.000Z

495

Masking line foregrounds in intensity mapping surveys  

E-Print Network [OSTI]

We address the problem of line confusion in intensity mapping surveys and explore the possibility to mitigate line foreground contamination by progressively masking the brightest pixels in the observed map. We consider experiments targeting CO(1-0) at $z=3$, Ly$\\alpha$ at $z=7$, and CII at $z=7$, and use simulated intensity maps, which include both clustering and shot noise components of the signal and possible foregrounds, in order to test the efficiency of our method. We find that for CO and Ly$\\alpha$ it is quite possible to remove most of the foreground contribution from the maps via only 1%-3% pixel masking. The CII maps will be more difficult to clean, however, due to instrumental constraints and the high-intensity foreground contamination involved. While the masking procedure sacrifices much of the astrophysical information present in our maps, we demonstrate that useful cosmological information in the targeted lines can be successfully retrieved.

Breysse, Patrick C; Kamionkowski, Marc

2015-01-01T23:59:59.000Z

496

Challenges to Overcurrent Protection Devices under Line-line Faults in Solar Photovoltaic Arrays  

E-Print Network [OSTI]

Challenges to Overcurrent Protection Devices under Line-line Faults in Solar Photovoltaic Arrays Ye-MA, LLC Newburyport, MA, US Abstract--Solar photovoltaic (PV) arrays behave distinctively from remain undetected, which could lead to reduced system efficiency, reduced system reliability, and even

Lehman, Brad

497

Abstract--Power Line Communications (PLC) is used for information exchange over the lines  

E-Print Network [OSTI]

Abstract-- Power Line Communications (PLC) is used for information exchange over the lines installed for delivering the electrical power. Inhome PLC is a technology which delivers telecom services to every corner of a household through already existing electrical wiring. In recent years, PLC has emerged

Boyer, Edmond

498

Student On Line Access to Records Provides on-line, self service access to  

E-Print Network [OSTI]

SOLAR Student On Line Access to Records #12;Provides on-line, self service access to: Registrar Enrollment Appointments · Review Solar Messages Student Account/ Financial Aid: · View Support offered (available aid ­ i.e. Federal loans, scholarships, etc.) · Accept financial aid (i.e. loans, etc.) ­ loan

499

Concurrent Wind Cooling in Power Transmission Lines  

SciTech Connect (OSTI)

Idaho National Laboratory and the Idaho Power Company, with collaboration from Idaho State University, have been working on a project to monitor wind and other environmental data parameters along certain electrical transmission corridors. The combination of both real-time historical weather and environmental data is being used to model, validate, and recommend possibilities for dynamic operations of the transmission lines for power and energy carrying capacity. The planned results can also be used to influence decisions about proposed design criteria for or upgrades to certain sections of the transmission lines.

Jake P Gentle

2012-08-01T23:59:59.000Z

500

Inductive gas line for pulsed lasers  

DOE Patents [OSTI]

A gas laser having a metal inlet gas feed line assembly shaped as a coil, to function as an electrical inductance and therefore high impedance to pulses of electric current applied to electrodes at opposite ends of a discharge tube of a laser, for example. This eliminates a discharge path for the laser through the inlet gas feed line. A ferrite core extends through the coil to increase the inductance of the coil and provide better electric isolation. By elimination of any discharge breakdown through the gas supply, efficiency is increased and a significantly longer operating lifetime of the laser is provided.

Benett, William J. (Livermore, CA); Alger, Terry W. (Tracy, CA)

1985-01-01T23:59:59.000Z